1597 files changed, 0 insertions, 2250087 deletions

diff --git a/.cvsignore b/.cvsignore
deleted file mode 100644
index 2a8035f11..000000000
--- a/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-docs
-images
-unused
-drakxtools.tar.bz2
-isolinux
diff --git a/Makefile b/Makefile
deleted file mode 100644
index 1885a64dc..000000000
--- a/Makefile
+++ /dev/null
@@ -1,96 +0,0 @@
-include Makefile.config
-
-DIRS = tools kernel mdk-stage1 perl-install rescue
-
-.PHONY: dirs install isolinux-graphic.bmp.parameters isolinux-graphic-simple.bmp.parameters images
-
-install: dirs images rescue install_only
-
-dirs:
-	@for n in $(DIRS); do $(MAKE) -C $$n all || exit 1 ; done
-
-images:
-	DISTRIB_DESCR=$(DISTRIB_DESCR) ./make_boot_img
-
-tar: clean
-	rpm -qa > needed_rpms.lst
-	cd .. ; tar cfj gi.tar.bz2 gi
-	rm needed_rpms.lst
-
-install_only:
-	install -d $(MISC_DEST) $(EXTRA_INSTALL_DEST) $(IMAGES_DEST) $(MEDIA_INFO_DEST)
-    ifneq (ppc,$(ARCH))
-	cp -f images/* $(IMAGES_DEST)
-	rm -rf $(IMAGES_DEST)/alternatives 
-	if [ `ls $(IMAGES_DEST)/*.img-* 2>/dev/null | wc -l` -gt 0 ]; then	\
-	  cd $(IMAGES_DEST); mkdir alternatives; cd alternatives; mv ../*.img-* .; md5sum *.img-* > MD5SUM; \
-	fi
-	cd $(IMAGES_DEST); md5sum *.{img,iso}* > MD5SUM
-    endif
-    ifeq (alpha,$(ARCH))
-	cp -f images/* $(ROOTDEST)/boot
-	cp -f vmlinux.gz $(ROOTDEST)/boot/instboot.gz
-	make -C tools/$(ARCH)/cd install ROOTDEST=$(ROOTDEST)
-    endif
-
-    ifeq (i386,$(ARCH))
-	rm -rf $(ROOTDEST)/isolinux
-	cp -af isolinux $(ROOTDEST)
-    endif
-
-    ifeq (x86_64,$(ARCH))
-	rm -rf $(ROOTDEST)/isolinux
-	cp -af isolinux $(ROOTDEST)
-    endif
-
-	make -C perl-install full_stage2
-	make -C perl-install/share/advertising install
-	make -C rescue install
-
-clean:
-	rm -rf images
-#	force taking new rpms from repository
-	rm -rf kernel/RPMS
-	for i in $(DIRS); do make -C $$i clean; done
-	find . -name "*~" -o -name ".#*" | xargs rm -f
-
-check:
-	@badrights=`find $(STAGE2_LIVE) | perl -lne 'print if !((stat)[2] & 4)'`; [ -z "$$badrights" ] || { echo "bad rights for files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$badrights" ; echo "bad rights for files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-	@missing_kb=`find -name "Entries" | xargs perl -F/ -alne 'print $$ARGV =~ m|(.*)/CVS|, "/$$F[1]" if $$F[1] =~ /\.(png|gif|bmp|xcf|gz|bz2|tar|rdz|so|a|o|mar|img|exe)$$/ && $$F[4] ne "-kb"'` ; [ -z "$$missing_kb" ] || { echo "missing -kb in CVS for files vvvvvvvvvvvvvvvvvvvvvvvvvv" ; echo "$$missing_kb" ; echo "missing -kb in CVS for files ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^" ; exit 1; }
-	$(MAKE) -C perl-install check
-
-upload: 
-	$(MAKE) clean
-
-#	# done before make install to increment ChangeLog version
-	tools/addchangelog.pl tools/cvslog2changelog.pl | tools/mailchangelog.pl &
-
-	$(MAKE) install
-	$(MAKE) check
-	$(MAKE) upload_only
-
-upload_only:
-	function upload() { rel=`echo $$1 | sed 's!$(ROOTDEST)/!!'`; rsync -qSavz --verbose --exclude '*~' -e ssh --delete $$1/$$2 mandrake@ken:/c/cooker/$$rel; } ;\
-	upload $(MEDIA_INFO_DEST) 'compssUsers.pl*' ;\
-	upload $(MEDIA_INFO_DEST) rpmsrate ;\
-	upload $(STAGE2_DEST) '*.clp' ;\
-	upload $(STAGE2_DEST) mdkinst.kernels ;\
-	upload $(STAGE2_DEST) VERSION ;\
-	upload $(EXTRA_INSTALL_DEST)/advertising '' ;\
-	upload $(MISC_DEST) gendistrib ;\
-	upload $(MISC_DEST) mdkinst_stage2_tool ;\
-	upload $(MISC_DEST) packdrake ;\
-	upload $(MISC_DEST) packdrake.pm ;\
-	upload $(MISC_DEST) auto ;\
-	upload $(IMAGES_DEST) MD5SUM ;\
-	upload $(IMAGES_DEST) '*.img*' ;\
-	upload $(IMAGES_DEST) '*.iso*' ;\
-	upload $(IMAGES_DEST)/alternatives '' ;\
-	upload $(ROOTDEST)/isolinux '' ;\
-	echo
-
-isolinux-graphic.bmp.parameters: isolinux-graphic.bmp isolinux
-	perl -I perl-install perl-install/standalone/draksplash2 --isolinux --kernel isolinux/alt0/vmlinuz --initrd isolinux/alt0/all.rdz $<
-
-isolinux-graphic-simple.bmp.parameters: isolinux-graphic-simple.bmp isolinux
-	perl -I perl-install perl-install/standalone/draksplash2 --isolinux --size 1400 $<
diff --git a/Makefile.common b/Makefile.common
deleted file mode 100644
index ec7066a06..000000000
--- a/Makefile.common
+++ /dev/null
@@ -1,64 +0,0 @@
- # -*- makefile -*-
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
- #- default lib is dietlibc (honoured by main Makefile whenever possible)
-L = DIETLIBC
-#L = GLIBC
-
- #- default frontend is newt (honoured by main Makefile whenever possible)
-F = NEWT
-# F = STDIO
-
- #- override in some situations
-ifeq (ia64, $(ARCH))
-L = GLIBC
-endif
-ifeq (ppc, $(ARCH))
-L = GLIBC
-endif
-ifeq (x86_64, $(ARCH))
-#L = GLIBC
-endif
-
-ifeq (DIETLIBC, $(L))
-DIET = $(top_dir)/dietlibc/bin-$(ARCH)/diet
-endif
-
-
- #- flags used by all stuff
-ifeq (ppc, $(ARCH))
-CFLAGS = -Os -pipe -Wall -fomit-frame-pointer -fno-strict-aliasing
-else
-CFLAGS = -Os -pipe -Wall -Werror -fomit-frame-pointer -fno-strict-aliasing
-endif
-
-DIETLIBC_INCLUDES = -I$(top_dir)/dietlibc/include -I. -I$(top_dir)/bzlib
-GLIBC_INCLUDES = -I. -I$(top_dir)/bzlib
-INCLUDES = $($(L)_INCLUDES)
-
-GLIBC_LDFLAGS_STAGE1 = -static
-DIETLIBC_LDFLAGS_STAGE1 = -nostdlib
-LDFLAGS_STAGE1 = $($(L)_LDFLAGS_STAGE1)
-
-GLIBC_LIBC =
-DIETLIBC_LIBC = 
-STAGE1_LIBC = $($(L)_LIBC)
-
-STRIPCMD = strip -R .note -R .comment
-
diff --git a/Makefile.config b/Makefile.config
deleted file mode 100644
index d798ff255..000000000
--- a/Makefile.config
+++ /dev/null
@@ -1,25 +0,0 @@
-ROOTDEST = /export
-MISC_DEST = $(ROOTDEST)/misc
-GENERIC_INSTALL_DEST = $(ROOTDEST)/install
-EXTRA_INSTALL_DEST = $(GENERIC_INSTALL_DEST)/extra
-IMAGES_DEST = $(GENERIC_INSTALL_DEST)/images
-STAGE2_DEST = $(GENERIC_INSTALL_DEST)/stage2
-STAGE2_LIVE = $(STAGE2_DEST)/live
-
-MAIN_RPMS_DIR = $(ROOTDEST)/media/main
-MEDIA_INFO_DEST = $(ROOTDEST)/media/media_info
-
-DISTRIB_NAME = Mandrakelinux
-DISTRIB_VERSION = 10.2
-DISTRIB_DESCR = "$(DISTRIB_NAME) release $(DISTRIB_VERSION) (Limited Edition 2005)"
-
-
-# not config, but useful everywhere :)
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
-ifeq (x86_64, $(ARCH))
-LIB = lib64
-else
-LIB = lib
-endif
diff --git a/advanced.msg.xml b/advanced.msg.xml
deleted file mode 100644
index 01c2b575a..000000000
--- a/advanced.msg.xml
+++ /dev/null
@@ -1,17 +0,0 @@
-<document>
-The following install types may be used instead of previously notified :
- o  <white>vgahi</white> for high resolution graphical installation.
- o  <white>vga16</white> for 640x480 in 16 colors graphical installation.
-
-The following options may be added on the command line :
- o  <white>readonly=1</white> to disable editing disk partitions.
- o  <white>display=ackbar:0</white> to export display to <blue>ackbar</blue> machine screen 0 during
-    installation.
- o  <white>noauto</white> to disable automatic detection.
- o  <white>security=n</white> to set security level to value <blue>n</blue>.
- o  <white>updatemodules</white> to use the special update floppy containing modules updates.
- o  <white>patch</white> to use a patch from the floppy (file named <blue>patch.pl</blue>).
- o  <white>auto_install=floppy</white> to enable auto_install using <blue>auto_inst.cfg</blue> file on the
-    floppy.
- o  <white>memtest</white> to test your computer RAM for faulty memory modules.
-</document>
diff --git a/docs/.cvsignore b/docs/.cvsignore
deleted file mode 100644
index a0593a470..000000000
--- a/docs/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pictures
diff --git a/docs/9.0_errata.txt b/docs/9.0_errata.txt
deleted file mode 100644
index 4fec8885c..000000000
--- a/docs/9.0_errata.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-# This file contains all the bugs/glitches/inconsistencies shipped in
-# 9.0 (Dolphin) Mandrake Linux Release.
-
-# Feel free to add your entry and if possible the fixes and status of
-# the errata.
-
- o Drakxtools:
-   ==========  
-
-   widget libraries:
-
-    In both XFdrake and printerdrake pop up small, empty, gray windows when 
-    clicking in the main menu. STATUS: Not fixed.
-
-    Scroll bars and widget sizes often not correct (visible primarily in the
-    printer options step of the "Add printer" wizard of printerdrake. STATUS:
-    Not fixed.
-   
-   harddrake:
-
-   logdrake:
-    IS: Send the alert mail when service is stopped but the mail
-	      is empty.
-    SHOULD BE: incorporate a text on which service is stopped.
-    Status: not fixed. 
-
- o Drakconf:
-   =========
-   IS: locale nl_NL, sl and zh_CN prevent drakconf from starting with
-   a "cannot call set_active on undefined values" error.
-
-   SHOULD BE: work well in all locales.
-   
-   a workaround has been comitted
-
- o Drakfont:
-   =========
-
-   drakfont get stopped in stat64("/mnt/nt/winnt/fonts/8514oem.fon",
-   ...) on ntfs partitions.
-   there's a bug in ntfs.o fs module of the kernel
-
- o Install: 
-   ========
- 
- o urpmi:
-   ======
-
-   "urpmi mplayer" shows a list of libraries it needs and asks whether
-   to install all this, after saying "y", it says that all these
-   packages are missing and fails (I have shown it to Fran�ois and he
-   says that is a bug with the "contribs". He had to regenerate the
-   hdlists somehow. STATUS: Not fixed.
-
- o XFree 4.2.x:
-   ============
-
-   Touchpad mouse on my Asus S8600 notebook. Worked out-of-the-box
-   with Mandrake 8.2, but in 9.0 I cannot do any dragging operation
-   with the PS/2-"Standard" mouse setting. I switched to "Glidepoint"
-   with mousedrake and then dragging works, but the emulation of the
-   third button by pressing both buttons not. Adding the lines
-
-      Option "Emulate3Buttons"
-      Option "Emulate3Timeout" "50"
-
-   to the mouse section of /etc/X11/XF86Config-4 manually fixes the
-   middle-button problem. STATUS: Not fixed.
-
-
-
-   Sometimes, XFree86 can cause sound glitches because of intensive
-   pci bus usage.
-   Adding the line
-
-      Option "PciRetry" "true"
-
-   to the "Device" section /etc/X11/XF86Config-4 fixes these boxes.
-
-
-   I810 driver is bogus: when Xrender extension is in use (antialiased
-   fonts), X11 may crash upon vt switch.
-   is fixed in devel branch of cvs
-
-
- o Printer drivers:
-   ================
-
-   "Best Grayscale" mode of HP DeskJet 6xx and Apollo printers does
-   not work. STATUS: Fixed on linuxprinting.org, needs to be packaged
-   in "printer-drivers".
-
-o kernel:
-  =======
-
-  Sometimes reboot stops on "illegal seek" message (having /usr on /
-  fs fix it)
-
-  Sometimes process get blocked in D-state on ntfs partitions (see
-  drakfont)
-
-  i810_audio mistakely say to modules.pm through modules.*map it
-  handles nforces whereas it lacks some workaround nvidia and alsa
-  uses.
-  workaround: perl-install/patch/patch-nforce.pl
-
-  snd-via686 is said to produce background noise since alsa-0.9.0rc3
-  workaround: switch to via82cxxx_audio (oss driver) through draksound
diff --git a/docs/9.1_errata.txt b/docs/9.1_errata.txt
deleted file mode 100644
index fa73c200e..000000000
--- a/docs/9.1_errata.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-# This file contains all the bugs/glitches/inconsistencies shipped in
-# 9.1 (Bamboo) Mandrake Linux Release.
-
-# Feel free to add your entry and if possible the fixes and status of
-# the errata.
-
-
- o DrakConf:
-   =========
-
-   - #2439: menudrake failled to run for users other than root and
-      xserver owner
-
-   - #3415: do not kill "explicitely non embeddable" processes when
-     killing embedded tools
-
-   both fixed in 9.1-12mdk
-
-
-
- o DrakxTools:
-   ===========
-   - drakconnect:
-     o ltmodem support is missing from mdk9.1 [added in hp release]
-     o various other fixes came into mdk4hp release
-
-   - explanations: most common ones are not logged because of a
-     standalone.pm vs common.pm methods overloading bug [not yet
-     fixed]
-
-   - harddrake-ui:
-     o menu entry starts logdrake instead of harddrake's gui [fixed in
-       cvs]
-     o status bar is not cleared on config tool exit [fixed in cvs]
-     o title bar miss some spaces in french locale [fixed in cvs]
-
-   - harddrake service: 5 second timeout was too short so it was
-     increased up to 25 seconds [in hp release]
-
-   - localedrake/drakx: legal problem with rpc vs hong-kong||taiwan
-     [fixed in hp release]
-
-
-
- o Kernel:
-   =======
-
-   - ntfs driver has a hang, additionally also causing 100% cpu usage
-     if either the size of the ntfs filesystem or the number of MFT
-     entries fell to a certain range and statfs() system call was
-     invoked by an application (e.g. df, gnome system monitor, etc).
-     see #3353
-
-     it got fixed quickly but unfortunately too late for us
-
-     the probability one hits this bug is 0.2% or every 512th users.
-
-     updated ntfs driver (2.1.2a) is at the usual place,
-
-	http://linux-ntfs.sourceforge.net/
-
-        or more precisely,
-
-	http://sourceforge.net/project/showfiles.php?group_id=13956
-
diff --git a/docs/BUGS b/docs/BUGS
deleted file mode 100644
index 1d154fcf1..000000000
--- a/docs/BUGS
+++ /dev/null
@@ -1,10 +0,0 @@
-doInstallStep: if there's not enough room, error, but packages are marked installed :(
-
-when you click directly on setupFilesystems and you have scsi, you're fucked.
-Even if you go to setupSCSI, you won't be able to have partitions again.
-
-bug non reproductible:
-- /etc/passwd is empty after `root passwd' stage :(
-- reboot at the end of package installation with a lot of error messages from
-gtk about the progressbar
-
diff --git a/docs/COPYING b/docs/COPYING
deleted file mode 100644
index 60549be51..000000000
--- a/docs/COPYING
+++ /dev/null
@@ -1,340 +0,0 @@
-		    GNU GENERAL PUBLIC LICENSE
-		       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-		    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-			    NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-	    How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/docs/HACKING b/docs/HACKING
deleted file mode 100644
index 5b16ed18f..000000000
--- a/docs/HACKING
+++ /dev/null
@@ -1,137 +0,0 @@
--=-=--
-DrakX is a very big project, and it needs special setups to work.
-The purpose of this file is to explain how you can setup your box to make it
-compile and run.
--=-=--
-
-Beware, don't try this on a production machine with important data.
-
-
---------------------------------------------------------------------------
-Sources installation:
-
-First grab the gi.tar.bz2 archive and untar it in your home directory, for 
-example from DrakX-*.src.rpm on your Mandrakelinux distribution.
-
-Fix a few things:
-% find gi -name "*/CVS/root/*" | xargs perl -pi -e 's/prigaux/anoncvs/'
-
-Then, log yourself into the cvs:
-% export CVS_RSH=ssh
-% export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-% cvs checkout gi
-� � � � (the passwd is: 'cvs')
-
-And update the gi package:
-% cvs update -P -d gi
-
-
---------------------------------------------------------------------------
-Preparing the compilation process:
-
-(1) target directory
-
-Create a top level directory called /export and give write permissions to 
-the user/group that will be compiling DrakX. �It is also suggested that you 
-copy a recent Mandrakelinux CD in there. (You don't have to put have all 
-the RPMS...) ; you'll need roughly 1.5 Gbytes for a full install. (It is 
-possible to not have a copy of Mandrakelinux there, if all you desire is to 
-compile gi)
-
-
-(2) support directories
-
-You will need to create a top level /RPMS directory. �This directory needs 
-to be populated with the following RPMS:
-locales-ja locales-ko locales-zh
-
-GI needs to be informed about which kernel(s) is/are to be used.
-Most of the time, no manual install is needed. Just be sure to
-have the BOOT kernel(s) in /RPMS, and typing make later on will
-extract the package(s) and build stuff from it.
-
-FYI, for each kernel, directories will be populated as follows:
-
-gi/kernel/all.kernels/2.6.0
-        special files containing 
-        - vmlinuz, modules.dep
-        - modules for stage1 (*.mar, *.tar)
-        - modules for stage2 (modules.cz)
-
-
-(3) required rpm packages
-
-You need quite a number of rpm packages installed on your system
-to build gi properly. Roughly:
-
-emacs gcc make glibc-devel glibc-static-devel perl-devel XFree86
-XFree86-FBDev XFree86-VGA16 XFree86-devel libglib-devel
-libgtk+-devel ldetect ldetect-devel ldetect-lst
-ldetect-lst-devel libslang-devel libnewt-devel e2fsprogs
-libext2fs2-devel dosfstools rpm-devel rpmtools libbzip2_1
-libbzip2_1-devel libncurses5 libncurses5-devel setserial telnet
-parted raidtools pciutils mt-st gpart reiserfsprogs jfsprogs
-xfsprogs extipl pcmcia-cs gettext perl-Gtk2 perl-Glib perl-XML-Parser ash imlib
-fb2png ntfsprogs lm_sensors galaxy-gnome perl-PerlIO-gzip brltty
-lvm2 mkcd perl-URPM glibc-i18ndata cloop-utils partimage syslinux
-memtest86+ dmraid dietlibc-devel
-
-You may need a few others I forgot to mention. If the compilation fails, try 
-to understand the message and install any necessary remaining package.
-
-
-(4)
-
-NEVER build or run Drakx as root. �Install sudo and setup the following 
-permissions in /etc/sudoers:
-
-user ALL=(root)
-NOPASSWD:/usr/bin/patch,NOPASSWD:/bin/rpm,NOPASSWD:/bin/mount,NOPASSWD:/bin/cp,NOPASSWD:/bin/umount,NOPASSWD:/usr/bin/install,NOPASSWD:/bin/rm,NOPASSWD:/bin/mv,NOPASSWD:/bin/tar,NOPASSWD:/bin/cpio,NOPASSWD:/bin/chown,NOPASSWD:/bin/mkdir,NOPASSWD:/usr/bin/strip,NOPASSWD:/bin/mknod
-
-
-(5)
-
-pray
-
-[gc@obiwan ~/cvs/gi] make
-
-
----------------------------------------------------------------------------
-The comments written with #- are automatically stripped out at install.
-
-
----------------------------------------------------------------------------
-testing all:
-
-� go to the perl-install directory and execute ./install2 --testing
-
-� NEVER execute DrakX as root! You might need to allow all users
-� to read the block devices of your hard-disks, though (chmod a+w
-� /dev/hda* for example).
-
-
-
-Here is how I (dams) made it work on my computer.
--------------------------------------------------
-
-- get the sources
-- install the librairies needed included newt-devel gtk+-devel popt-devel popt gtk-engines
-- cd path/to/gi
-- make
-- mkdir /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/themes /usr/share/gtk
-- ln -s path/to/gi/perl-install/share/step-* /usr/share
-- ln -s path/to/gi/perl-install/share/help.xpm /usr/share
-- ln -s path/to/gi/perl-install/share/isdn* /etc/sysconfdir/network-scripts
-- have a cd architecture linked on /export
-- ln -s /export /tmp/rhimage
-- export PERL_INSTALL_TEST=1
-- cd path/to/gi/perl-install
-- gendistrib --noclean --distrib /export
-- ./install2 in root (dangerous) or chmod a+r /dev/hd* and ./install2 in user
-
-
-
-address all bugreports to dave@null.com
-
-info has been added by sunny@opencurve.org
diff --git a/docs/Partition-ends-after-end-of-disk.txt b/docs/Partition-ends-after-end-of-disk.txt
deleted file mode 100644
index 3da57d561..000000000
--- a/docs/Partition-ends-after-end-of-disk.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-        Cylinder/Head/Size Hell Is Not Over 
-
-            pixel@mandrakesoft.com 
-         $Date$
-
-
-Nowadays, you can boot Linux without ever relying on CHS
-(Cylinder/Head/Size):
-
-- CHS information on partition table is obsolete and not used anymore.
-It was causing the 1024th cylinder limitation:
-  - disallowing partitions above 8GiG. Problem overcome using 28bits Linear
-  Block Addressing (LBA) in partition table.
-  - disallowing to boot on partition above 8GiG (due to int13 limitation used
-  in bootloaders). Problem overcome using int13 extensions (EDD)
-
-Logical CHS (Cylinder/Head/Size) and physical CHS are not related anymore.
-Especially the size of a hard drive is not a multiple of the number of
-Cylinders.
-
-
-The problem is that many tools still rely somewhat heavily on CHS information.
-- most tools adjust partitions on cylinder boundary
-- some tools compute the size of the disk based on CHS (eg: fdisk)
-
-
-Resulting problems in various tools:
-
-- last partition not cylinder boundary adjusted, and overrun CHS computed size
-  - fdisk
-    > Total allocated sectors %d greater than the maximum %d
-  - cfdisk (need confirmation)
-    > FATAL ERROR: Bad primary partition %d: Partition ends after end-of-disk
-    or
-    > FATAL ERROR: Bad logical partition %d: Partition ends after end-of-disk
-  - Partition Magic (version?)
-    > Error #109: Partition ends after end of disk
-  - Windows <= 98se, Windows Me
-    (doesn't like it, what error message?)
-
-  Tools handling it correctly:
-  - parted and so diskdruid in RedHat >= 7.2 (or is it 7.x?)
-  - diskdrake >= Mandrake 8.2
-  - Windows XP (need confirmation)
-
-  Tools using the full size of the disk, and so causing pbs with fdisk/cfdisk/...:
-  - diskdrake == Mandrake 8.2
-
-- disagreement between CHS and linear address
-  - parted
-    > "Warning: Unable to align partition properly.  This probably means that
-    > another partitioning tool generated an
-    > incorrect partition table, because it didn't have the correct BIOS
-    > geometry.  It is safe to ignore,but
-    > ignoring may cause (fixable) problems with some boot loaders.
-    > Ignore Cancel ? C
-  - lilo
-    > Warning: Kernel & BIOS return differing head/sector geometries for device 0x80
-    >     Kernel: 38792 cylinders, 16 heads, 63 sectors
-    >       BIOS: 1023 cylinders, 255 heads, 63 sectors
-    > Device 0x2100: Inconsistent partition table, 2nd entry
-    >   CHS address in PT:  48:0:1  -->  LBA (771120)
-    >   LBA address in PT:  48384  -->  CHS (3:3:1)
-    > The partition table is *NOT* being adjusted.
-
-
diff --git a/docs/README b/docs/README
deleted file mode 100644
index 7f7c6b552..000000000
--- a/docs/README
+++ /dev/null
@@ -1,300 +0,0 @@
-Well here is a little description of what DrakX needs to work in comparison
-to the RH newt install.
-
-********************************************************************************
-* CVS **************************************************************************
-********************************************************************************
-Like all good free software, DrakX is in CVS :)
-
-You can access it at http://www.mandrakelinux.com/cgi-bin/cvsweb.cgi/gi
-
-or via
-
-export CVS_RSH=ssh
-export CVSROOT=:ext:anoncvs@cvs.mandrakesoft.com:/cooker
-cvs checkout gi
- (enter password 'cvs')
-
-
-This is only read-only access. If you want more, tell me (pixel@mandrakesoft.com)
-
-Alas, all is not in CVS, a lot of things come from rpm packages which you must
-install.
-
-Please note that redoing *all* the stuff is not for the faint of heart. I myself
-sometimes wonder what the whole make does :-%
-Instead, changing some .pm files is quite easy (nice interpreted language)
-
-********************************************************************************
-* Making your custom install ***************************************************
-********************************************************************************
-If you have your own rpms you want to add, or make your own updated cdrom, you
-just have to issue:
-
-% gendistrib --noclean --distrib <DIRS>
-
-Where <DIRS> is the root of all the media that the install will see, this first
-one is the main one :
-
-(1) network or 1-cdrom installs
-	DIRS == the root directory of the Distribution
-
-(2) multi-cdrom install
-	DIRS == the root directories of all the media that the install will see
-
-``gendistrib'' will scan the file media/media_info/hdlists in the main root
-directory (the first one in DIRS) to search for all media used. Typically you
-use media/main for RPM packages repository.
-For multi-cd, please use media/main or media/foo, etc.
-For one CD or a network/hd volume, please use media/main.
-
-Optionnally, you can modify ``media/media_info/rpmsrate''; this file manages
-the relative importance of the files, and thus their installation or not.
-
-To modify the code of stage2, use "misc/mdkinst_stage2_tool install/stage2" to generate "install/stage2/live".
-When you are done use "misc/mdkinst_stage2_tool install/stage2" again, the "rm -rf install/stage/live".
-See below for information about these files.
-
-********************************************************************************
-* FILES ************************************************************************
-********************************************************************************
-First here are the different things needed :
-
-media/media_info/hdlists
-	description of the available install media.
-	format is one line for one medium as
-		<hdlist_name> <rpms_directory> <description>
-	<hdlist_name> should be match regexp /hdlist\S*.cz2?/
-	for example (two cd install) you get
-		hdlist1.cz	Mandrake/RPMS1	Boot CD
-		hdlist2.cz	Mandrake/RPMS2	Extension CD
-
-media/media_info/hdlist*.cz
-	table of rpm's headers, referred by ``hdlists''
-	their contents can be listed using ``packdrake -l <hdlist_file>'' or
-	or ``parsehdlist <hdlist_file>''.
-	! Need to be remade when media/main changes (with ``gendistrib'') !
-
-media/media_info/depslist.ordered
-	for each packages, tell which package it depends on. Also contains the
-	size for some (obscure) bloody reasons.
-	! Need to be remade when media/main changes !
-	(with ``gendistrib --noclean --distrib .'')
-
-media/media_info/compssUsers
-
-media/media_info/rpmsrate
-	ranks and classify packages, so that the installer will know which
-        ones to install. format is :
-		<intern_group>
-			<level> <packages>
-	where <intern_group> is a symbolic name used in media/media_info/compssUsers* files,
-	and <level> defines importance level as described below :
-		5	must have
-		4	important
-		3	very nice
-		2	nice
-		1	maybe
-	by default (for non expert), group selects packages for level 4 (important)
-	and 5 (must have). export mode add 3 (very nice) level. other level (below 2)
-	can only be selected using individual package selection.
-
-install/stage2/live
-	live system used on certain installs. See ``Ramdisk or not'' below for
-	more.
-
-install/stage2/mdkinst.clp
-	for the compressed loopback of install.
-	generated from install/stage2/live tree using misc/mdkinst_stage2_tool
-
-install/stage2/rescue.clp
-	rescue ramdisk. create_compressed_fs iso file
-	this is the ramdisk loaded when typing rescue on boot prompt.
-
-install/images/*.img
-	floppy boot images to use with DrakX. Use:
-	- cdrom.img for cdrom install
-	- network.img + network_drivers.img for ftp/nfs install (non-pcmcia devices)
-	- hd_grub.img for hard-disk install (see http://qa.mandrakesoft.com/hd_grub.cgi)
-	- pcmcia.img for pcmcia install (see ``PCMCIA install'' below for more)
-
-install/images/boot.iso
-	iso image to burn enabling any install (cdrom/hd/nfs/ftp)
-
-  Boot from cdrom:
-  - boot.iso : iso image to burn
-  
-  Boot from hd (esp. usb key):
-  - all.img : fat16 image to dd on a partition (hint: sda1)
-    - it seems some bioses don't use the code on MBR (sda), 
-      or at least skip it when it's blanked
-      (eg: "dd if=/dev/zero of=/dev/sda bs=1 count=446")
-    - some bioses need it. I had some luck using
-      dd if=/usr/lib/extipl/aldebaran.bin of=/dev/sda
-      (install package extipl first)
-  
-  Boot from network:
-  - all.rdz + vmlinuz via pxe
-  
-  Boot from floppy:
-  - cdrom.img : to install from a cdrom (but not a usb drive)
-  - network.img + network_drivers.img : to install from network
-  - hd_grub.img : to install from hd
-
-  dd for windows: http://uranus.it.swin.edu.au/~jn/linux/rawwrite/dd.htm
-
-********************************************************************************
-* logs *************************************************************************
-********************************************************************************
-During install, a lot of interesting stuff can be found in different places:
-in consoles and in files. To switch to console 2 for example, do Ctrl-Alt-F2
-from the X install.
-- alt-F1: the stdout of the install. Not very interesting stuff
-- alt-F2: simple shell. Quite a lot of commands are available but as they are
-written in perl (for space), they do not handle the very same options as normal.
-After install, you can do ``chroot /mnt'' to see your system just like after
-rebooting. ``rpm -qa'' works for example.
-- alt-F3: a lot of interesting things. Be carefull, some ``ERROR'' messages are
-not interesting.
-- alt-F4: kernel's place. aka the output of dmesg.
-- alt-F7: the graphical install lives there
-
-- command "bug" puts on floppy lots of interesting stuff.
-- /tmp/stage1.log: same as alt-F3 part when stage1 run (e.g. actions
-  before graphical install really begins)
-- /tmp/ddebug.log: (nearly the) same as latter alt-F3 part
-- /tmp/syslog: same as alt-F4
-- /mnt/root/drakx/ddebug.log: at the end of each step, DrakX tries to backup
-  /tmp/ddebug.log to /mnt/root/drakx. Available only after mounting of /.
-- /mnt/root/drakx/install.log: the log of the installation (or upgrade) of the rpms
-(just like rpm's /mnt/tmp/(install|upgrade).log)
-- /mnt/root/drakx/auto_inst.cfg.pl: a kickstart file generated at the end of each
-step. Can be used in 2 ways: kickstart install or ``defcfg'' install. Hopefully
-you know about kickstart. ``defcfg'' is a way to customize the default values in
-install. For example, French can be the default language with a qwerty keyboard,
-the auto-partitionning partitions can be changed, the default user class can be
-set to developer (!)...
-
-********************************************************************************
-* po translation files *********************************************************
-********************************************************************************
-DrakX uses .po files for its translation. A script takes the different
-strings out of the .pm files. It generates the DrakX.pot file which contains
-all the english strings to translate.
-
-********************************************************************************
-* PCMCIA install ***************************************************************
-********************************************************************************
-If the media you use to install is a pcmcia device, use the pcmcia boot disk.
-
-********************************************************************************
-* modules **********************************************************************
-********************************************************************************
-Modules can be found in at least 2 places:
-- in /modules/modules.mar
-- in /lib/modules.cz<KERNEL_VERSION_RELEASE>
-
-/modules/modules.mar is used in mdk-stage1. It contains only modules
-interesting for one kind of install. For example in an hd install, it
-contains scsi modules. For a network install, it contains network card
-modules. (To create, extract or view files in a ``mar'' archive, please
-use gi/mdk-stage1/mar/mar; this is basically an archive format meant to
-be minimalistic)
-
-/lib/modules.cz<KERNEL_VERSION_RELEASE> contains all modules, it is used
-in stage2.
-
-
-To manually install a module during install, switch to console #2
-and type "modprobe <modulename>". The modprobe program is a perl
-wrapper around /usr/bin/insmod. It uses the dependencies found in
-/modules/modules.dep (stage1).
-
-/usr/bin/insmod is a wrapper around /usr/bin/insmod_. It just extracts the
-module out of /lib/modules.cz in /tmp. Then it calls insmod_.
-
-/usr/bin/insmod_ is the real prog (which you usually find in /sbin/). You need
-to give it the complete path.
-
-********************************************************************************
-* Making screenshots ***********************************************************
-********************************************************************************
-1. easy solution: press "F2"!
-
-2. On a test machine, make a network install, switch to console (ctrl-alt-F2), enter:
-% xhost+
-then, on another computer:
-% DISPLAY=test_machine:0 xwd -root | convert - screenshot.png
-
-********************************************************************************
-* Auto install *****************************************************************
-********************************************************************************
-A powerful auto-install system is available. It allows performing
-an install without any human interaction.
-
-To feed automatic parameters to the stage1 part (the textmode
-part - might not be necessary for you if you plan to do
-cdrom-based auto-installs, but mostly highly needed when doing
-network installs), please refer to ../mdk-stage1/doc/TECH-INFOS.
-
-About the stage2 part (the actual installer, at the time you're
-(usually) running in graphical mode), please refer to the nice
-documentation written by David Eastcott. Either install the
-package "drakx-autoinstall-doc" from contrib, or browse:
-
-http://members.shaw.ca/mandrake/drakx/9.0/HTML/
-
-The previous document will explain you how to setup the contents
-of the auto_inst.cfg file. Note that you have 3 alternatives for
-providing this file:
-- from a floppy disk; use "kickstart=floppy" as kernel parameter,
-  as explained in the document
-- from the installation volume itself; put the file in the
-  "install" directory of the installation volume; use
-  "kickstart" only, or "kickstart=filename" to specify another
-  filename than auto_inst.cfg
-- specified by the network; setup your DHCP server to provide the
-  "bootfile" parameter, this file will be used as the
-  "auto_inst.cfg" file; in this case you also need to provide the
-  "netauto" boot parameter
-
-In any case, if the specified file ends with -IP or -IP.pl, IP
-will be substituted by the IP address of the machine, when doing
-a network install. Might be useful so that you can control all
-your auto installs from your server.
-
-********************************************************************************
-* Miscellaneous ****************************************************************
-********************************************************************************
->  o Media access methods: nfs, ftp, http, hd, cdrom
->  o Stages: init, stage1, stage2
->    - What exactly each stage does
-
-init loads stage1
-stage1 loads stage2, from various medium type
-
-stage2 is too big to fit on a floppy, that's why stage1 exists
-
->    - How each stage relates to the various media access methods
-
-stage1 knows only how to access to the media is compiled for. It
-contains only the kernel modules needed for that media. For eg,
-the nfs/ftp/http stage1 (network.img floppy) doesn't contain scsi
-modules nor ide.
-
->    - How one stage terminates and another begins. i.e., How does
->      stage1 find, mount, and launch stage2?
-
-  /sbin/init just starts /sbin/stage1, and monitors its
-execution; it's here to cleanly umount the partitions when stage1
-or stage2 dies/finished
-
-  /sbin/stage1 takes care of mounting stage2 (in ramdisk if
-necessary) then it execs /usr/bin/runinstall2 (thus, stage2
-replaces stage1, and init then monitors stage2)
-
->  o Text and Graphic mode installers
->    - Architectural overview of each
-
-have a look at gi/docs/object_class.fig
-
diff --git a/docs/README.devel b/docs/README.devel
deleted file mode 100644
index 989946de9..000000000
--- a/docs/README.devel
+++ /dev/null
@@ -1,252 +0,0 @@
-Well here is a little description of how DrakX can be modified or extended.
-Please refer to README file for getting DrakX code source and to known more
-exactly how it works and what it can do.
-
-
-********************************************************************************
-* Execution of DrakX ***********************************************************
-********************************************************************************
-DrakX has originally be written by pixel in perl and C.
-entry point for stage2 is /usr/bin/runinstall2 which is typically a link to
-/usr/bin/install2 which simply load module install2.pm and execute
-install2::main with @ARGV.
-
-install2::main parse command line arguments, prepare installation, find the right
-install_interactive class (take a look at gi/docs/object_class.fig) according to
-command line, memory available and if the interactive chosen is initializing
-correctly, else it will try a less-demanding interactive object.
-Once done, $::o is set to this install & interactive object and main runs the
-various step of install2 defined in $o->{steps}, starting with $o->{steps}{first}
-and iterating with method install_any::getNextStep().
-while running step, it trap any errors that may arise and use perl exception to
-change step.
-
-********************************************************************************
-* DrakX modules descriptions ***************************************************
-********************************************************************************
-Here is a brief description of what each modules of DrakX is doing.
-
-install2: main module of DrakX as described above, main loop execution of DrakX.
-
-install_steps: generic installation module containing steps definition, all steps
-  should always be defined here as some methods may be used on automatic mode.
-  there is no interactivity available. typically are defined base operation for
-  configuring each step according to $o.
-
-install_steps_interactive: generic installation module with generic interative
-  methods. typically are found all interactive code of DrakX for each steps.
-
-install_steps_auto_install: implementation installation module without interactive
-  methods to match auto_install mode. this is the simplest as almost no method are
-  redefined (inherit module install_steps only, compared to other implementation
-  modules described below).
-
-install_steps_stdio: implementation installation module with interactive stdio
-  methods to match stdio mode. inherit modules install_steps_interactive and
-  interactive_stdio.
-
-install_steps_newt: implementation installation module with interactive newt
-  methods to match newt mode. inherit modules install_steps_interactive and
-  interactive_newt.
-
-install_steps_gtk: implementation installation module with interactive gtk
-  methods to match gtk mode. inherit modules install_steps_interactive and
-  interactive_gtk.
-
-install_any: contains various methods using generic interactive interface but
-  not used by standalone tools.
-
-install_gtk: contains various methods using gtk interface but not used by
-  standalone tools.
-
-interactive_stdio: implementation methods for interactivity in stdio mode.
-  inherit module interactive.
-
-interactive_newt: implementation methods for interactivity in newt mode.
-  inherit module interactive.
-
-interactive_gtk: implementation methods for interactivity in gtk mode.
-  inherit module interactive.
-
-my_gtk: basic gtk access methods.
-
-any: contains various methods using generic interactive interface. to compare
-  against install_any module as this one is available for standalone tools.
-
-class_discard: simple module that implement every methods undefined to return
-  nothing. this trick is used to ensure no undefined method can arise when using
-  code that reference interactive method which are not defined.
-
-common: contains very simple and very usefull (common) methods to do various task.
-  some methods inspired by functionnal language.
-
-c: contains wrapper to C definition of methods used by DrakX, use of C is necessary
-  for C extern libraries interface (rpmlib, ldetect), kernel interface, XFree
-  interface.
-
-commands: implement some un*x commands, conflicting name with perl contains
-  trailing underscore (_). this module is used by commands perl script that
-  determine which command to run according to $0 (this is used this way when DrakX
-  is running).
-
-run_program: allow running a program with redirection but without using a shell.
-  allow rooted execution.
-
-help: contains all help message displayed by DrakX.
-
-log: log facility methods.
-
-lang: language manipulation methods, get and set sysconfig file, load po.
-
-keyboard: keyboard manipulation methods, get and set sysconfig file, set console
-  keyboard mapping.
-
-mouse: mouse manipulation methods, get and set sysconfig file, change mouse.
-
-timezone: time zone manipulation methods, get and set timezone.
-
-services: services manipulation methods, activate or delete services (see
-  /etc/rc.d/init.d directories).
-
-detect_devices: manage detection of various class of hardware.
-
-devices: manage device file, create device special according device name.
-
-partition_table: base partition table management methods, it manages
-  appriopriate partition_table_XXX object according to what has been read
-  as XXX partition table type.
-
-partition_table::bsd: matches a BSD partition table.
-
-partition_table::dos: matches a DOS partition table.
-
-partition_table::emtpy: matches an empty partition table.
-
-partition_table::mac: matches an Apple partition table.
-
-partition_table::raw: generic class for the following partition_table::XXX.
-
-partition_table::sun: matches a Sun Label partition table.
-
-fs: read and write /etc/fstab file, mount and umount, format.
-
-fsedit: manage (modyfy, edit) mount point associated to partition (like editing
-  /etc/fstab).
-
-swap: swap management methods, format and mount (activation).
-
-raid: raid (software only) management methods.
-
-lvm: lvm (Logical Volume Manager) management methods.
-
-loopback: loopback management methods, used for lnx4win type installation or using
-  a file as a partition.
-
-diskdrake: diskdrake itself, disk graphical (using gtk) manipulation tools.
-
-ftp: ftp mangement methods, used when using ftp install.
-
-http: http management methods, used when using http install.
-
-modparm: kernel modules options management, allow building nice dialog with each
-  module parameter available.
-
-modules: kernel modules management, allow loading or unloading (ala modprobe or
-  insmod).
-
-printer: printer management methods, read and write both LPR or CUPS configuration.
-
-printerdrake: interactive printer management methods.
-
-network: network management methods, get and set sysconfig file.
-
-netconnect: network configuration wizard.
-
-netconnect_const: network configuration wirard data.
-
-Xconfig: X configuration (monitor + already existing config file) management.
-
-Xconfigurator: X configuration wizard.
-
-Xconfigurator_const: X configuration wizard data.
-
-booloader: bootloader (LILO, GRUB, LOADLIN, SILO) configuration management methods.
-
-pkgs: rpm package and hdlist, depslist management methods, allow selecting or
-  unselecting packages, manage rpmsrate file and select group, installation and
-  removal methods of rpm file.
-
-crypto: *obsoleted* module to manage crypto site and rpm file.
-
-standalone: standalone only, allow defining a standalone tools.
-
-bootlook: standalone only, interface with DrakConf to configure bootloader options.
-
-drakfirewall: standalone only, interface with DrakConf to configure a tiny firewall.
-
-********************************************************************************
-* DrakX FAT resizer module description *****************************************
-********************************************************************************
-here is a fat resizer written in perl and C used by DrakX (diskdrake) to resize
-FAT16/FAT32 partition. it moves clusters to make sure a shrink can be done on the
-limit of the partition itself, if no cluster need to be moved, only boot sector
-partition limit are modified.
-
-any: various methods to flag cluster, compute min size.
-
-boot_sector: boot sector management methods.
-
-c_rewritten: originally resize_fat was only perl, this contains code section that
-  are the most sensible to speed or memory contraints and have been rewritten to C
-  using perl extension.
-
-dir_entry: manage directory structure.
-
-directory: traverse directory recursively, needed to move correctly cluster.
-
-fat: manage fat structure.
-
-info_sector: manage info sector.
-
-io: manage I/O on disk (need to take care of big file as partition size may be
-  larger than 2GB).
-
-main: main resizer algortihm. if needed allocate new clusters, copy files, copy
-  directories. update boot sector info.
-
-********************************************************************************
-* Adding a new step to DrakX ***************************************************
-********************************************************************************
-Say we want to add a question for setting "alawindows" option.
-We put it pretty early in the install, let's say after "Select Installation
-Class".
-
-1. in install2.pm
-
-add
-
-  selectAlawindows => [ __("A la windows or not"), 0, 1, '' ],
-
-after
-
-  selectInstallClass => [ __("Select installation class"), 1, 1, '' ],
-
-the 0, 1, '' means not "redoable", "skip on error", "don't hide"
-
-2. add your function selectAlawindows in install2.pm
-
-sub selectAlawindows  { $o->selectAlawindows }
-
-3. add your function selectAlawindows in install_steps_interactive.pm
-
-sub selectAlawindows {
-    my ($o) = @_;
-    $o->{alawindows} = $o->ask_yesorno('', _("Throw everything away as windobe does?"), 1);
-}
-
-4. add your function selectAlawindows in install_steps.pm (not needed in that
-case, except for auto_install)
-
-sub selectAlawindows  {}
-
-
diff --git a/docs/README.pxe b/docs/README.pxe
deleted file mode 100644
index 2ddd205fe..000000000
--- a/docs/README.pxe
+++ /dev/null
@@ -1,133 +0,0 @@
-Here is a short description to configure a PXE server using dhcpd and tftpd.
-This allows a network boot for your ethernet card conforming to the Interl
-PXE specification.
-
-********************************************************************************
-**********                       General overview                   ************
-********************************************************************************
-
-You need a dhcp server and a tftp server on one or two machines to allow the 
-network boot. We are not using a PXE server to achieve this as it is not
-mandatory. 
-You can install tftp-server and dhcp-server package from the Mandrake
-distribution for example.
-
-On the server machine at 192.168.2.1, you will find a "/etc/dhcpd.conf" sample
-file written by Florin Grad <florin@mandrakesoft.com>, where "mydomain.com" is
-assumed to be your domain name, and 192.168.1.1 a name server. All install are
-done on subnet 192.168.2.0.
-
-All the files that will be downloaded by the tftp daemon are located under 
-"/tftpboot" :
-  "/tftpboot/pxelinux.0" is a program that is loaded directly by the machine
-                         where a network boot will be done, this program comes
-                         from the SYSLINUX package by H. Peter Anvin. (look at
-                         http://syslinux.zytor.com/pxe.php for more information)
-  "/tftpboot/pxelinux.cfg/" is a directory where all configuration file for
-                         pxelinux.0 will be found, pxelinux.0 will download
-                         these file by itself. It searches first for a file
-                         named accordind to the machine IP address in
-			 hexadecimal, for example for 192.168.2.20, it
-			 looks for "C0A80214" first, then "C0A8021" and so
-			 on down to "C0", "C" and "default".
-  "/tftpboot/network.rdz" is the standard network initrd for Mandrake installation.
-  "/tftpboot/vmlinuz"    is the boot kernel for installation.
-  "/tftpboot/help.msg"   is the message displayed by pxelinux.0, note that currently
-                         graphical message (as for install using SYSLINUX 1.48 with
-                         graphic patch by Mandrake) is not supported.
-
-All file "network.rdz", "vmlinuz", "help.msg" can be found by mounting "network.img",
-or the network floppy disk used for install, "pxelinux.cfg" is just an adaptation
-of the file found on the "network.img" called "syslinux.cfg" but without the reference
-to boot.msg (as it is not currently supported).
-
-Update network configuration for your needs and start dhcp server on the machine and
-tftp server and this should work.
-
-********************************************************************************
-* /etc/dhcpd.conf **************************************************************
-********************************************************************************
-ddns-update-style ad-hoc;
-
-authoritative;
-
-option space PXE;
-option PXE.mtftp-ip code 1 = ip-address;
-option PXE.mtftp-cport code 2 = unsigned integer 16;
-option PXE.mtftp-sport code 3 = unsigned integer 16;
-option PXE.mtftp-tmout code 4 = unsigned integer 8;
-option PXE.mtftp-delay code 5 = unsigned integer 8;
-option PXE.discovery-control code 6 = unsigned integer 8;
-option PXE.discovery-mcast-addr code 7 = ip-address;
-
-default-lease-time 28800;
-max-lease-time 86400;
-
-option domain-name "mydomain.com";
-option domain-name-servers 192.168.1.1;
-
-class "PXE" {
-  match if substring(option vendor-class-identifier, 0, 9) = "PXEClient";
-  option vendor-class-identifier "PXEClient";
-
-  vendor-option-space PXE;
-  option PXE.mtftp-ip 0.0.0.0;
-  next-server 192.168.2.1; #tftp server location
-
-  filename "pxelinux.0";          # standard TFTP
-
-}
-
-shared-network "mynetwork" {
-  subnet 192.168.2.0 netmask 255.255.255.0 {
-    option subnet-mask 255.255.255.0;
-    option routers 192.168.2.1;
-
-    ddns-domainname = "mydomain.com";
-
-    pool {
-      range 192.168.2.10 192.168.2.20;
-      allow members of "PXE";
-    }
-  } 
-}
-********************************************************************************
-* /tftpboot/pxelinux.cfg/default ***********************************************
-********************************************************************************
-default linux
-prompt 1
-timeout 72
-display help.msg
-label linux
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=788
-label vgalo
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=785
-label vgahi
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga=791
-label vga16
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 vga16
-label text
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 text
-label patch
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 patch vga=788
-label expert
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 expert vga=788
-label rescue
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz  root=/dev/ram3 rescue rw
-label oem
-  kernel vmlinuz
-  append ramdisk_size=32000 initrd=network.rdz automatic=method:cdrom root=/dev/ram3 rescue oem rw
-********************************************************************************
-* Usefull linkst ***************************************************************
-********************************************************************************
-
-http://syslinux.zytor.com/pxe.php
-http://www.kano.org.uk/projects/pxe/
diff --git a/docs/SHORTCUTS b/docs/SHORTCUTS
deleted file mode 100644
index 93a7133db..000000000
--- a/docs/SHORTCUTS
+++ /dev/null
@@ -1,51 +0,0 @@
-********************************************************************************
-main shortcuts
-
-F1 -> help
-F2 -> take a screenshot
-F11 -> previous step
-F12 -> next (reachable) step
-
-********************************************************************************
-diskdrake
-
-taken directly from diskdrake.pm:
-
-		"a" => \&Active,
-		"b" => \&Move,
-		"c" => \&Create,
-		"d" => \&Delete,
-		"f" => \&Format,
-		"m" => \&Mount_point,
-		"M" => \&Mount,
-		"n" => \&Create,
-		"o" => \&ReadFromFile,
-		"s" => \&SaveInFile,
-		"q" => \&Exit,
-		"r" => \&Resize,
-		"t" => \&Type,
-		"u" => \&Unmount,
-		"w" => \&WritePartitions,
-		"W" => \&WriteFstab,
-
-hopefully it is explicit enough :)
-
-********************************************************************************
-list choice
-
-- acceleration a la windows (default): enter a letter and the selection will move to the
-first entry beginning with that letter. If you enter another letter it will try
-to find the entry beginning with the 2 letters you have given. In case it fails
-the starting_word is reset.
-- incremental search a la emacs: searches trough the list
-
-Use control-s to use incremental search and then to search next occurence
-
-********************************************************************************
-in case of complete mouse sh**t
-
-XFree86 provides a way of moving the mouse pointer:
-- first, press Ctrl-Shift-NumLock
-- then move the pointer with the keypad arrows
-- press button is ``0'' (aka Inser)
-- release button is ``.'' (aka Suppr)
diff --git a/docs/TODO b/docs/TODO
deleted file mode 100644
index cb9399f82..000000000
--- a/docs/TODO
+++ /dev/null
@@ -1,515 +0,0 @@
--URGENT---------------------------------------------------------------------------------
-check for fpons/pixel BOTH that resize_fat is clean for current version
-relative to 7.0-2.
-
-heavy testing of diskdrake to avoid corrupting partition table, current version
-should be available to fix bogus partition table, writing enabled only when
-partition is Ok (fixme? allow primary partition inside extended one, but with
-warning on diskdrake startup, made them as warning ?).
-
--features-------------------------------------------------------------------------------
-add rpmdrake in menu
-
-(7.1 or later) clean SCSI CDROM autoboot.
-(done,gc,8.0) stage1 & cdrom: add ability in expert to choose the scsi cdrom drive to use
-
-(7.1)better help for partitioning in newbie
-
-(7.1)Improved network configuration (PPP and/or Ethernet)
-PPPoE install and configuration (SuSE includes it, DHCP-like)
-(7.1)standalone applications for configuration (netdrake, timetool, authentificationconf, soundcard)
-
-----
-(7.2) replace normal with standard (in the installClass's)
-
-(7.2 or later)horizontal sub-steps
-
-(7.2 or later)diskdrake in text mode
-
-ask "do you have SCSI?" before asking "probe PCI or not"
-
-(?) paride in stage1
-(done,gc,8.0) stage1 & network: add ability to choose the network interface to use
-
-(?) msec custom
-
-(?)firewall configuration (instant firewalling?)
-
-(?)widget for displaying fdisk (dindinx)
-add fdisk using the zvt widget (taken in gnome-libs)
-
-(?)help in some configuration files.
-
-ability to add nfs/weird_fs entries in fstab
-
-size of packages in crypto
-
--to test--------------------------------------------------------------------------------
-what's lseek64?
-
-ensure installClass is set to something in auto install.
-
-for axp, swriteboot -f1 if swriteboot failed.
-axp with swap part sigsegv
-
-tree for choosing monitors (buggy?)
-
-what happens if a module fails to insmod (scsi step), in beginner/normal/expert
-
-fstab must be sorted (/usr/local after /usr)
-
-RAID upgrades
-
-add choice clean /tmp or not in expert
-
-kernel chosen by default must be the one according to supermount/secure
-
-bug if ide-scsi, no more hdX, but scd0 (aka sr0)
- (and add alias block-major-11 ide-scsi ?)
-
-check on update for conf.modules and modules.conf !
-
-with /usr, /usr/local and /usr/local/e mount points i get an error at step mounting local filesystems
-
--easy fixes-----------------------------------------------------------------------------
-rpmdrake proposition for cdrom labels
-
-use option nocheck to mount for upgrades
-
--fixes needing thinking-----------------------------------------------------------------
-bug: changing mem= in miscellaneous doesn't modify lilo conf if you backtrack
-
-ask network configuration only if NIC found?
-
-configure DHCP for newbies if ethernet & DHCP card available
-
-xvidtune like screen configuration (see SuSE's yast)
-
-live cdrom for alpha (sparc?)
-
-network boot
-
-get the error when getting/reading .rpm files fail
-better timeout handling for network installs
-
-handle not enough room for update
-(fpons)verify the free space is big enough.
-
-the XFdrake test does not handle the fontset
-
-> Here I go into the printer configuration select 'HP Deskjet 722C Colour',
-> print a test ASCII page, pressing 'No' when prompted to indicate the page did
-> not print OK and then hitting cancel when prompted to choose a printer type
-> again.
-> ask_from_list cancel at /usr/lib/libDrakX/my_gtk.pm line 504.
-
-diskdrake: take from parted mklabel, hide(?)
-
-bug in kde desktop if keeps home but not an upgrade
-	
-bug in users: mandrake user is added twice in strange installs
-(mixed of security 0 + ???)
-
-bugs rpmdrake: 
-- just after installing a package, switch to `Installed', the package has wrong name
-- refresh the kde desktop after package installation in rpmdrake
-(restart kpanel)
-- rpmdrake and same name packages
-
-urpmi: pb if XXX-devel requires XXX = 1.2.3 and we updgrade XXX-1.2.3
-
-bug in defcfg in with lang=fr_FR, display is buggy
-
-bug keyboard focus: after switch in console at Xconfig step
-
-
-
--to look at--------------------------------------------------------------------------
-adduserdrake to remove/update users
-
-(???)free provider auto configuration facility (to be discussed).
-auto ppp-configure with free provider
-
-(?)on laptop, configure the MMU to use swap not very often
-
-(?)checkboxes in groups based on compssList (and availableSpace?)
-
-(?)see what can be done with nvram (50 bytes to save information)
-
-better wacom support
-
-(fpons)bug: CANON BJC 4X00 do not work with current rhs-printfilters
-  (work with magicfilters (debian))
-  (should be handled by ghostscript BJC600's driver)
-
-(pix)install text on mem=8M, mem=16M?
-
-(pix)kickstart
-partitioning? raid?
-X configuration and bootloader in kickstart
-
-XFdrake chooseResolutions with ask_from_list do not permit ``Show all''
-
-(?) options in mkfs, progress bar when formatting
-
-(?) when some error occurs, partition must be unset isFormatted
-
--hardware-------------------------------------------------------------------------------
-- with no floppy drive, mkbootdisk step fails badly
-- with bad floppy or write protected, mkbootdisk doesn't say anything
-- try detect_devices::floppies (and how are scsi floppies handled?)
-maybe: do a iotcl FDGETPRM to detect fd1, fd0.
-
-need a simple solution to precise mouse type (syslinux option?)
-
-ELSA Gloria has bad ddc info
-
-token ring is tr0 not eth0
-
-I have Mandrake 6.1  installed and working on a ThinkPad 770.
-To enable the PCMCIA Token ring I have to append the following line to
-/etc/pcmcia/config.opts
-module "ibmtr_cs" opts "mmiobase=0xd2000 srambase=0xd4000"
-
-smp not detected (mhoward@memphisonline.com on cooker, bios=BP6PW)
-
-UDMA66 (ultra66.o for promise)
-
-aha152x needs "insmod aha152x.o aha152x=0x140,11,7"
-
-(obsolete) usb module not removed if no mouse found
-
-(fpons)handle dat drives
-
-hibernation on laptop -> clock not restored
-
-# in 2.3.15 "Silicon Integrated Systems [SiS]|SiS900 10/100 Ethernet" is handled
-
-(?)enable the testing of the mouse type (under X) (wheel)
-possibility to specify the mouse
-
--(?)---------------------------------------------------------------------------------
-(?) handle NT (add entry for it in lilo, put it in fstab)
-
-(?) lilo-0.22-19mdk is buggy with boot=/dev/hde & root=/dev/sda13, it needs
-disk=/dev/hde bios=0x80 & disk=/dev/sda bios=0x81
-
-(?)using setxkb, enable the testing of the keyboard
-
-(?)XFdrake does not handle fbdev
-
-(?) Je viens de faire une installation sur une machine o� seul Be �tait
-install�. Je l'ai supprim� et install� (mode recommand�) Oxygen. Au
-red�marrage, le boot manager de Be appara�t et il est impossible de
-d�marrer Linux.
-Pourquoi ne pas installer LILO si on supprime toutes les partitions ?
-
-(?)initrd in bzip2
-
-(?)smaller zsh (or ash in initrd)
-
-(?)is configureNetworkNet needed with dhcp/bootp?
-
-(?)bug in upgrade: install from hda1:/usr/local/blah with hda1:/
-
-(?)mandrake_desk was not installed while kdebase it there on upgrade
-
-(?)when clicking on X configuration, installation of packages is not displayed
-
-(?)maybe remove commented lines in /usr/lib/perl5/... files
-
-(?)timezone using a picture (pb: how to delimit zones)
-when asking GMT or not, display the time for each possibility
-the list is too big for USA
-
-(?)ability to select the type of install when booting of cdrom
-(?)use the ability of el torito to handle 2.88MB or more 
-
-(obsolete)lilo-deinstallation in case of lilo auto-installation for beginners
-
-(?)loadFont sucks
-
-(obsolete)trash on the screen when X first starts
-
-(?)remove the gray line surrounding the logo
-
-(?)cleanup /etc/services & /etc/protocols
-
-(?)strange: no scsi of type 'fd', only 'tape'
-
-(?)remount ro before X test.
-
-(?)remove every << and >> (doesn't handle > 32bits)
-
-
--done---------------------------------------------------------------------------------
-(7.1,done,fpons) improve printerdrake to at least have the same functionalities as printtool.
-
-(done,fpons)diskdrake can olverlap partitions (resize lower, resize original typically
-after clear all and auto allocate, try maximal size available).
-
-(done,fpons)rewrite mouseconfig in perl?
-
-(done,pix)kudzu or not in miscellaneous
-
-(done,pix)warn the user if not enough ram to fulfill install
-
-(done,fpons)test after printer config
-
-(done,pix)ask for more than the memory size detected
-
-(done,fpons)modem config
-
-(done,pix)call kudzu in batch to initialize its list
-
-(done,pix)standalone generator of mdkinst_stage2.gz
-
-(done,pix)text install
-
-(done,pix) if u choose mouse usb != found mouse, it fails at X config
-
-(done,pix) diskdrake bug: saved information on floppy contains isMounted.
-
-(done,pix) update devices.c from modules.pm
-
-(done,pix) in lilo.conf, put 
-disk=/dev/hdb
-  bios=0x80
-
-(done,pix) diskdrake
-auto_partitions
-suggested partition tables must be better foreach installClass
-
-(done,pix) update the list of modules (in update_kernel)
-
-(done,pix) language support: only choose the right locales and upmark the packages requiring it
-
-(done,pix) move security question before isntallation of packages
-
-(done,pix) install ssh
-
-(done,fpons,pix) change the boot message of syslinux (have something different from RedHat)
-
-(done,pix) install_steps.pm: 569 (128M + 3)
-
-(done,pix) bug: mouse freeze just before network configuration (mouse primax)
-  (was kudzu)
-
-(done,pix) signal 11 in stage1 nfs kickstart mount failed
-
-(done,pix) ask supermount or not, no supermount with kernel-secure
-
-(done,pix) fix bug in g_auto_install (can't go through all)
-
-(done,pix) bug: install from ciril.fr fails
-
-(done,pix)wizard for partitioning in case of one full vfat
-
-(done,dindinx)app for choosing drakxtools (drakxconf)
-(done,pix)verify being root
-(done,pix)log::l -> initlog
-
-(done,pix)install apmd for laptops (maybe not start apmd though)
-(done,pix)icewm apm (sh icewm_apm)
-(done,pix)kde apm (put Kapm.kdelnk in ~/Desktop/Autostart)
-
-(done,pix)bug in adduserdrake: missing pwconv in md5
-(done,pix)correct the default value of draksec (cp draksec)
-(done,pix)in draksec, (and maybe others) have --expert as default if /etc/sysconfig/system has TYPE=expert
-
-(done,pix)bug in XFdrake in install, cancel in choose Card do not close the window
-
-(done,pix)in XFdrake, testing should not overwrite /etc/X11/XF86Config
-
-(done,pix) hwiz and supermount and eject :(
-
-(done(replaced by msec's),pix) bug: usermod -G urpmi a not done (full install)
-
-(done,pix)perl and .ph's
-
-(done,pix) BUG bootp in network install sigsegv
-
-(done,pix) move the last done stuff before Xconfiguration if possible
-
-(done,pix)draksec is buggy, don't try security >= 4
-
-(done,pix)install apmd on laptops?? (maybe ask emcweb@btinernet.com (see alix))
-
-(done,pix)missing alias ll for root
-
-(done,pix)urpmi.addmedia:  |gzip instead of doing it afterwards
-
-(done,pix)locale (and fonts?) buggy in case ramdisk is used
-
-(done,pix)rpmdrake: Installed packages not in hdlist should be there
-
-(done)in ftp install, locale not installed properly
-
-(done,pix)pcmcia.img does not handle hd/cdrom
-
-(done,pix)cyrillic font buggy in DrakX
-
-(done,fred)remove xfs user from kdm
-
-(done,pix)bug with 2 cdrom drives (.kdelnk to there for 1st drive)
-
-(done,pix(works))test ramdisk stage2 and romanian
-
-(done,pix)kfmrc
-
-(done,pix)on laptop, default to 1024x768
-
-(done,pix)mkinitrd and deps
-
-(done,fred(removed the call))XFdrake and mousedrake freeze if lothar launches them
-
-(done,pix)crypto message
-
-(done,pix)test bug with lilo and windows (if not on mbr)
-
-(done,pix)removed icons come back later (kde desktop)
-
-(done,pix(was bug in upgrade reading old config))
-  segfault in linuxconf (adapter 1 empty)
-  (test with the sysconfig sent)
-
-(done,fpons)bug: Lrosqu'on effectue une mise � jour et que /etc/lilo.conf
-contient la variable � default � positionn�e sur autre chose que
-� linux � ou � windows �, DrakX est incapable de g�n�rer LILO.
-
-(done,fpons)bug: GeForce and hd.img?
-
-(done,fpons)for upgrade in expert, give choice of packages to install
-   choosing packages available in upgrade?
-
-(done,pix)rpmdrake: pb uninstalling package with dependencies (rpmdrake is killed?!) (as root too)
-
-(done,pix)noatime option for ext2 fs on laptops (do not wake up the hd)
-       Do  not  update  inode  access times on this
-       file system (e.g, for faster access  on  the
-       news spool to speed up news servers).
-
-(done,pix)kde's icons: 28 horiz and 25 vert grid for big icons
-
-(done,pix)bug: DrakConf don't follow the charset -> add setlocale(LC_ALL, "")
-(done,pix)for ko|ja|zh, gnome-terminal should point to rxvt (-CLE)
-(done,pix)group cdrom in /etc/group (gid=22)
-(done,pix)drakxtools should require urpmi
-(done,pix)bug: gdm unset LANG
-(done,pix) zip with automount -> ppa not autoloaded
-(done,pix)when you set the kde icons to Large, maybe it'd be good to chown the .kderc
-(done,pix)lilo in russian/japaneese is horrible
-(ok,pix)test ide burners
-(ok)test check bad blocks optional for mke2fs
-(done,pix)hd install: no umount is done at the end of install :(
-
-just before release:
-(done,pix)- mandrake_doc-xx, the symlink is no good in /usr/doc/mandrake as 
-(done,pix)- crypto dependencies to update
-(done,pix)- update kudzu's pcitable
-(done,pix)- update pcitable for 86C368 if 3.3.6 (and other S3 3D's)
-            ("ATI|3D Rage P/M Mobility AGP 2x" -> changed to Server:Mach64)
-
-(done,pix)with 2MB of video ram, chooses 8bpp instead of 16bpp
-
-(done,pix) replace
-	{ device => "loop7", type => 0x83, size => ((cat_('/dos/lnx4win/size.txt'))[0]*2048), mntpoint => "/", isFormatted => 1, isMounted => 1 },
-by
-	{ device => "loop7", type => 0x83, size => cat_('/dos/lnx4win/size.txt') * 2048, mntpoint => "/", isFormatted => 1, isMounted => 1 },
-
-(done,fpons)in ftp install, bug with X server install with wu-ftpd 2.6 (see http://www.wu-ftpd.org/broken-clients.html)
-
-(done,pix)ask package installation languages (must be put in RPM_INSTALL_LANG)
-
-(done,pix)bug (by dadou): Si la partition racine est trop petite pour installer le syst�me, un
-message d'erreur appara�t pour signaler le probl�me (bien) mais on ne
-peut en sortir. La seule solution est de red�marrer.
-
-(obsolete)bug when selecting compssUsers, do not deselect after (if u deselect)
-
-(done,pix)detect ide burners and then add hdX=ide-scsi to kernel cmdline
-
-(done,pix)urpmi: handle many args on cmd-line
-
-(done,pix)fix any // in path to ftp server otherwise windobe server bug :(
-
-(done,pix)diskdrake and auto partitioning, may have the last creation of partition rejected,
-try to figure why?
-
-(done,pix)in chooseResolutions: display the graphic card found
-
-(done,pix)with pcmcia, need ONBOOT=no
-
-(fpons,done) XFree: handle by card options
-eg: SIS6326 needs "no_bitblt" "no_bltimage" and 24bpp instead of 32bpp
-
-(done,pix) Xconfiguration: if "can't open fixed font", relaunch xfs.
-
-(obsolete) pb with dependencies ``missing'': icewm do not require XFree86 and so you can have icewm but no X server
-
-(obsolete) bug in ext2resizing (no sparse superbloc, don't finish properly)
-
-(done,pix,7.1)manage a lot of language (ergonomic issue as it already exists)
-
-(done,pix,7.1)tree for choosing things like timezone, monitors, graphic cards, modules, mice, keyboard? ...
-
-(done,pix,7.1)sound config, although very simple, no dedicated steps and only PCI (or maybe ISA-PNP if time left ?)
-
-(done,pix,7.1)partitioning, keyboard shortcut.
-
-(done,fpons,7.1)index/compress hdlist? (for multi-cd)
-! for multi-cd live is mandatory, small transaction are mandatory too.
-
-(done,pix,7.1?)loopback partitions (even root one)
-
-(done,pix)in ok_cancel, focus has 3 states, should be 2 (ask dindinx)
-
-(done,pix,7.1)Generally improved package selection /ergonmic issue.
-Tree -> CTree, ``all'' branch with all packages
-show the value associated (100->a must, 90->great, 80->nice, ... 10->useless, 0->do not install)
-
-(done,pix)let diskdrake have dos/win partition automatically set up with mount point,
-this will help loopback too.
-
-(done,pix,7.1)grub
-
-(done,pix,7.1)feature missing: cancel installation
-
-(obsolete) bug in diskdrake: can in strange cases create a primary partition at sector #0
-
-(done,pix(partly, protection against bugging))bug in diskdrake:
-in expert: blank, create hda5 at beginning, create hda6 at the end, create hda7
-in the middle, remove the first one. Result hda5 at the end and bug.
-
-(obsolete) have a better time estimation of the remaining time in install packages
-
-(done,dindinx+pix)ask_many_from_list can't keyboard scroll
-
-(done,pix,7.1)individual package selection: double click is tiring...
-
-(done,fpons,7.1) sparc ehancement, avoid V7+ machine target (div and mul not in v7 standard)
-
-(done,fpons,7.1)syslinux in graphical mode to be improved for heavily bogus BIOSes.
-
-(done,pix)missing feature in lilo configuration: can't give hda2 with /boot/vmlinuz if
-already hda1 with /boot/vmlinuz
-
-(done,pix)in 640x480 install box is to small (cuz of 'Cancel' button beeing added)
-
-(done,pix)chooseGroup with individual alone
-
-(done)(7.1) rewrite crypto stuff
-(done)crypto: add a cancel & progress bar while downloading
-(done)error handling (like reading hdlist)
-(done)(7.1)progression bar on crypto.
-
-(done, daouda&pix,7.1, other persons)rescue: 
-- small modification for stage1 to get the rescue stage2
-- create a stage2 with many tools (fdisk, bash...)
-the rescue could be on another cd (if multi-cd)
-! care must be taken about modules (if ide is in module...)
-
-(done,7.1)install in 800x600
-- need handling of both 640x480 (mostly for VGA16) and 800x600
-
-(done,NEED 7.1) auto-install for corporate, very important (need consolidation).
diff --git a/docs/advocacy b/docs/advocacy
deleted file mode 100644
index 9e7f00b6b..000000000
--- a/docs/advocacy
+++ /dev/null
@@ -1,87 +0,0 @@
-a little DrakX history:
-
-june 1999: 
-  i start rewriting redhat's install in perl, partly for the fun of it. I'm
-  still working for the army
-
-5 july 1999: 
-  i start full time job at mandrakesoft. But we don't have many computers and i
-  must share the accounting computer with Merieme who is working half-time. No
-  test machine (i test on others box, and destroyed Jacques partitions once),
-  guess how it slows things down?
-
-august 1999: 
-  at last computers, even test one
-  first DrakX version which can install things, very very rough
-
-september 1999: 
-  a friend of mine help me 2 weeks on DrakX relayed by Francois
-
-november 1999:
-  first released version of DrakX (goldpack). Not really stable yet.
-
-january 2000:
-  7.0 is out, with a DrakX quite stable
-
-july 2000: 
-  dams starts working on draknet
-
-mid-october -> mid-january 2000: 
-  gc rewrites the stage1 to win every kb we can 
-  -> size divided by 7 (!) for cdrom
-
-
-The DrakX team is also doing a lot of other things:
-- drakxtools
-- urpmi, early MandrakeUpdate, early rpmdrake...
-- Mandrake Control Center (new DrakConf)
-- packages maintenance/enhancing (esp. ghostscript, 3D-wrappers, lilo)
-- fixing core packages to make them installable
-- scoring packages, sorting them, flagging them... (compssList, rpmsrate)
-- reading/answering cooker and other MLs
-- helping non-perl gurus :)
-
-That doesn't give much. Me being the one more working on plain DrakX. It gives 2
-people working for 1.5 years. IMO it isn't ``spending an enormous amount of
-resources''.
-And what do you mean by ``compared to the code base size''??? DrakX is currently
-around 28K lines, which is big IMO. You can compare it with linuxconf which is
-170K lines. I think the achievement of DrakX is comparable (a 6 times code size
-win from dumb C++ to expressive perl is normal imo).
-
-
-Also it seems like we don't have the same understanding of the word
-"maintenance".
-DrakX functionalities have evolved *a lot* since the beginning:
-
-- hardware detection, configuration, debugging, work-arounding (multi-kernel installs...)
-- making things prettier
-  - more bitmaps
-  - "advanced" button
-  - syslinux graphical boot
-- making it work with latest versions of software (eg: switching to rpm4)
-- finding out the best way to use rpmlib
-- multi-cd
-- draknet: configuring every piece of stupid protocols
-- diskdrake: raid, loopback, LVM, resizing, checking stupid users entry
-- XFdrake: multi-mice, multi-heads, 3D-accel
-- porting to axp/sparc/ppc (with Stew's help)
-- always more i18n
-- keeping things small
-  - .cz format
-  - moving to .png
-  - getFile on demand from mdkinst for ramdisk installs
-
-[...]
-
-> You don't believe the books ? Count yourself; see the man/months spent
-> in 'pure' developoment in drakX, and the resources put in mantainance
-> of the code base; as far as i know, your count should confirm what the
-> books says; more probabily, you will discover that our numbers are
-> even worse.
-
-if you count enhancements, adding features... in maintenance, i confirm the
-numbers, and find them quite normal.
-
-if you only count bug fixing, the time would be much shorter (around 30%).
-
diff --git a/docs/advocacy-interactive b/docs/advocacy-interactive
deleted file mode 100644
index 99036008e..000000000
--- a/docs/advocacy-interactive
+++ /dev/null
@@ -1,60 +0,0 @@
-
-> > We already have some functional backends, frontends, that works great, and has
-> > not been thrown away since 1 year. We use it during install, post install, mcc
-> > and so.
-> 
-> But aren't generic enough.
-
-DrakX handles:
-- buttons
-- bool values (checkboxes)
-- ranges
-- entries
-- combo boxes (editable or not)
-- lists / radio boxes
-- tree lists
-- iconlist
-- wait messages
-
-Features:
-- all the entries above can be mixed
-- nice separation between data and displayed data (eg: choose in list of
-objects representing hda/hdb/... but displayed nicely with size...)
-- keyboard handled nicely in GTK frontend
-- callback on events:
- ok pressed => check before the dialog is hidden
- focus changed => 
-  * enables pre-setting things based on other entries
-  * value checking on the fly
-- simple/advance toggle 
-- shadowing of entries
-- tooltips
-- size of windows computed the best possible
-- perl-based
-
-Misfeatures:
-- display not flexible (though i don't know any of the tools we're talking
-about that is flexible => nice)
-- quite a few features are gtk only (simple/advance toggle, shadowing of
-entries, certain events, tooltips).
-- a stdio front-end exist but handle only certain entries. It would need a
-week-work to finish it
-- a http front-end could be done (mod-perl needed)
-- perl-based
-
-The DrakX frontend (called "interactive") could be moved out of DrakX.
-
-eg of use:
-
-<#part type="text/plain" filename="~/bin/perl/imessage" disposition=attachment>
-<#/part>
-
-[...]
-
-> > -provides a lot of frontends
-> 
-> And you ideally have to provide a frontend by widget set.
-
-nope. The interface is completly standardised, even if it include some
-gtk-like niceties. The *complete* newt (and not just entries and radioboxes
-like bus) binding takes 241 lines.
diff --git a/docs/comparisons b/docs/comparisons
deleted file mode 100644
index f399a9e84..000000000
--- a/docs/comparisons
+++ /dev/null
@@ -1,288 +0,0 @@
-redhat 6.1 (fr?), install 766MB, df 900MB, 35min (asked for all groups except "everything")
-
-upgrade to redhat 6.2, sum 757MB, df 936MB, 20min
-
-mandrake 7.1, install 755MB, df 1091MB, 17min (asked install size 910MB), 515 packages
-
-upgrade to cooker, sum 1000MB, df 1404MB, 35min
-
-
-redhat 7.0b, install 815MB, df 960MB, 18min
-redhat 7.0, install 995MB, df MB, 26min
-
-7.2b, 3.3GB 2h26
-
-
-7.2b: (lang fr)
-compssLevel  df  rpm  	time  fs          df/time
-	               	     
-100          64   59  	0:59  ext2 500M   1.08
- 90         132  127  	1:50  ext2 500M   1.20
- 80         226  218  	3:26  ext2 500M	  1.10
- 70         449  387  	5:52  ext2 1G	  1.28
- 60         614  541  	8:36  ext2 1G	  1.19
- 50        1113  943   17:40  ext2 2G	  1.05
- 40        1193 1013   20:39  ext2 2G	  0.96
- 30        1262 1072   22:28  ext2 2G	  0.94
- 20        1445 1219   27:34  ext2 2G	  0.87
- 10        1649 1394   36:58  ext2 2G	  0.74
-  0        1943 1638   48:02  ext2 2G	  0.67
--10        2957 2519  101:49  ext2 4G 	  0.48
-
-7.2b: (lang all)
-compssLevel  df  rpm  	time  fs          df/time
-
-100          70   59  	1:04  ext2 500M   1.09
- 90         289  281  	4:20  ext2 500M	  1.11
- 80         373  361    5:41  ext2 500M	  1.09
- 70         890  794   13:28  ext2 1G	  1.10
-
-
-mem used 7.2cooker
-gtk:   runinstall2 13608(data 9572) + FBDev 2984(data 1544)
-newt:  runinstall2  9516(data 7528)
-stdio: runinstall2  9160(data 7372)
-
-8.0rc1: (lang fr)
-
-rpmsrate
-
-4   ()        175   139    3:25   reiserfs 2G  0.85
-4   all       831   786   18:08   reiserfs 2G  0.76
-
-8.1b
-
-5   ()         77    66    1:24   ext2 300M
-
-8.1pre_rc1     rpm   df                       time/rpm  rpm/df
-
-6   ()         82    66    1:26   ext2 500M   1.05      1.24
-5   ()         89    71    1:38   ext2 500M   1.10	1.25
-3   ()         94    77    1:46   ext2 500M   1.13	1.22
-5   X         145   127    2:09   ext2 500M   0.89	1.14
-3   X         231   217    3:26   ext2 500M   0.89	1.06
-4   kde       393   316    4:31   ext2 2G     0.69	1.24
-4   kde       393   316    4:41   ext2 2G     0.72	1.24
-4   kde       393   316    4:43   ext2 4G     0.72	1.24
-5   all       367   337    5:02   ext2 500M   0.82	1.09
-4   kde+gnome 454   370    5:50   ext2 4G     0.77	1.23
-4   kde+gnome 454   370    6:10   ext2 4G     0.81	1.23
-4   kde+gnome 454   370    6:24   ext2 4G     0.85	1.23
-5   all       489   406    5:55   ext2 4G     0.73	1.20
-5   all       490   406    5:18   ext2 1G     0.65	1.21
-4   kd+gn+dsk 594   494    7:31   ext2 4G     0.76	1.20
-4   prev+dev  827   696   10:27   ext2 4G     0.76	1.19
-4   all      1100   988   19:34   ext2 1G     1.07	1.11
-3   all      1640  1331   31:33   ext2 2G     1.15	1.23
-3   all      1740  1434   39:38   ext2 4G     1.37	1.21
-2   all      2252  1843   54:40   ext2 4G     1.46	1.22
--1  all      2490  2048   61:02   ext2 4G     1.47      1.22
-
-# perl -alpe '$F[4] =~ /(.*):(.*)/; $r = ($1 * 60 + $2) / $F[2]; s|\S+(\s+\S+)\s*$|sprintf("%.2f", $r) . "$1"|e;'
-# perl -ape '$r = $F[2] / $F[3]; s|\S+\s*$|sprintf "%.2f\n", $r|e;'
-
-9.0beta1
-
-5   ()         89    71    1:35   ext2 500M
-3   X         240   231    3:41   ext2 500M
-5   all       306   293    3:36   ext2 500M
-4   all       808   731    6:48   ext2 1G
-4   all      1433  1331   21:44   ext2 2G
-4   X+kde     822   749    6:05   ext2 2G
-4   X+gnome   369   319    5:58   ext2 2G
-
-
-redhat 7.3:
-- do not halt the box when "halt" is used
-- no sysreq
-- kdm has gnome entry whereas gnome is not installed
-  => choosing gnome gives a flashing black screen and kdm reruns
-
-- repartition of packages on various CDs is crap
-
-- bootloader: handling of multiple disks is more powerful in redhat, but more
-dangerous (proposed to everyone, but not proposed especially to people having
-a dangerous combinaison)
-- why still asking about lba32!!
-
-* anaconda 7.3 vs 7.3.92
-  - skipddc option (locks some machines) ??
-    maybe because it's done at the beginning of their install?
-  
-  - LVM
-    - lvm_dialog_gui.py
-    - Physical Extent 1MB 2MB 4MB ... 16GB
-      (vgcreate -s ${PhysicalExtentSize}k)
-    - see lvm_sanity_checks.txt, take them
-    - lvm on / (mkinitrd)
-    - handle upgrade when lvm on /
-    - vgcreate -An (ie --autobackup no) ??
-      (also for lvcreate vgchange lvremove
-    - see clampPVSize in lvm.py
-
-  - RAID
-    - Number of spares ??
-    - mkraid --dangerous-no-resync  ??
-  
-  - progress bar in ext2 formatting
-  
-  - ctrl-alt-suppr during install => reboots
-  
-  - user names: the regexp is [a-zA-Z][^\0-\x20:,\n]*  or  [A-Za-z][A-Za-z0-9]{0,7}   (depending on wether you're in text mode or graphic mode :)
-  - check the user name created is not a system one (see systemUsers)
-  
-  - SMB authentification
-  - cloneDrive ?
-
-  - edd dropped (was to detect lba32 capability, which was dumb)
-
-  - reconfig type of installed removed (was something between install & upgrade)
-
-  - ddcprobe code removed -> moved to kudzu
-    changes: sigprocmask and movl added around lrmi_vm86
-
-  - $ENV{GDK_USE_XFT} = 0
-
-* kudzu 0.99.52 vs 0.99.55
-  - blacklisting modules.pcimap e100 and bcm5700
-
-* hwdata 0.14 vs 0.32
-  - dropped XFree86 3.3.6 support
-
-  - upgradelist: list of (old_module => new_module) for upgrades
-    (a simpler way would be to drop entries in modules.conf that concern
-    obsolete (and not available anymore) modules, relying on auto-detection to
-    add the new one)
-
-  - CardMonitorCombos (for laptops)
-
-redhat 8.0:
-
-  (legend: + pros  - cons  / notice)
-  
-  Install steps difference
-  + firewall wizard
-  + md5sum check when booting install
-  - no upgrade packages installation during install
-  - no services configuration (chkconfig)
-  - no printer configuration
-  - no autologin
-  - no real small installation
-  - no small packages (groff-for-man, perl-base...)
-  / still propose non-MD5 or non-shadow passwords
-  / post install tool (firstconfig)
-  
-  General install behaviour, eye-candiness
-  + package selection a la Windows
-  + in language selection languages displayed in native language
-  + candy timezone selection
-  + help uses bold/italic/big-font
-  - no one CD install
-  / not using fb at install
-  / python + gtk2  vs  perl + gtk
-  / ask many things before doing anything (esp. delayed partitioning, swap not available when selecting packages!(?))
-  - more width-hard-coded dialog boxes (harder for translations)
-  / use a loopback file from the CD then copied on system
-  
-  Partitioning
-  - no diskdruid after install
-  - no partitioning wizard
-  - no devfs
-  - no xfs (but now has reiserfs/jfs)
-  - no loopback crypted fs
-  - no file swap (?)
-  - no supermount
-  + LABELed entries in fstab
-  + progress bar while formatting
-  
-  Bootloader
-  + bootloader configuration less awkward
-  - no automatic handling of bios ordering with many harddrives
-  - propose to manually change bios ordering even with one harddrive
-  - LBA32 checkbox
-  / defaults to grub
-  
-  Network
-  - awkward question apropos hostname when using DHCP
-  - no default choice for netmask/gateway/DNS based on IP
-  
-  XFree
-  - no wacom configuration
-  - no graphic card multi-head configuration
-  - no ATI tvout configuration
-  - no prompt for logout after changing X config
-  - VideoRam prompted for everybody
-  / no XFree3
-  / no Utah GLX
-  / load module "fbdevhw" "record", but not "v4l"
-  / always load module "glx" and "dri"
-  
-  Keyboard
-  - many non useful keyboard entries (eg: latin0)
-  - no way to choose the toggle key to choose between latin/non-latin keyboard 
-  - no loadkeys done during install for console
-  
-  Mouse
-  - no way to test mouse choice
-  - mouse choices include many non-useful choices, badly sorted
-    (Intellimouse must be sought in Microsoft whereas it's used by many others)
-  
-  Multimedia
-  - no bttv configuration (including webcams)
-  - missing audio modules (alsa, audigy...)
-
-* anaconda 8.0 (rel. 4) vs 8.0.92
-  - use vte instead of gnome.zvt
-  - add alpha (axp) partitioning code
-  - remove label "nofb" and options "devfs=nomount ramdisk_size=9216" from syslinux.cfg
-  - edd (ddc probe) moved to kudzu
-  - add "-Odir_index" option to ext3 tunefs 
-  - screenshoting in directory /root/anaconda-screenshots/ instead of using exported display
-  - assembler code change in cpuid, smp.c
-  - there is some code to read the "raid superblock" (see doGetRaidSuperblock in isys/isys.c)
-  - new code for choosing to upgrade or not
-  - hack to remove /var/lib/rpm/__db.00[123] (with comment "make sure that the rpmdb doesn't have stale locks :/")
-
-* anaconda 8.0.92 vs 8.0.93 (rel. 0.20030108205243)
-  - drop xmode (bring up text mode in a remote xterm)
-  - code available to check the ability to do a mkbootdisk 
-    (check size of vmlinuz + initrd, check size of floppy)
-  - drop "-Odir_index" option to ext3 tunefs 
-    (with comment "add back -Odir_index when htree is safe")
-  - waitForLink added to loader2/net.c using added ethtool thingy (get_ethtool_link_status, get_link_status)
-  - OS390 fdasd & z/IPL changes
-  - for kickstart, new option "--ignoremissing", (there were --ignoredeps and --resolvedeps)
-  - /usr/kerberos/lib in LD_LIBRARY_PATH
-  - these are symlinks so you cant make them mount points
-    otherexcept = ['/var/mail', '/usr/bin/X11', '/usr/lib/X11', '/usr/tmp']
-
-	    elif self.mountpoint in otherexcept:
-                return _("The mount point %s cannot be used.  It must "
-			 "be a symbolic link for proper system "
-			 "operation.  Please select a different "
-			 "mount point.") % (self.mountpoint,)
-		
-
-* hwdata 0.47 (redhat 8.0) vs 0.62 (redhat 8.1 beta1 phoebe)
-  - pcitable & upgradelist
-     - replace eepro100 with e100
-     - switch 0x1106 0x3059 "via82cxxx_audio" to "unknown"
-  - Cards
-     - remove most swcursor with comment:
-        # mharris - Nov 23, 2002 - Commented out the swcursor option, if it is still
-        # needed, then lets disable it right in the driver completely, or possibly
-        # fix it.
-     - using driver "nv" for GeForce4 and Quadro4 with comment:
-        # mharris - Nov 23, 2002 - enabling "nv" driver for GeForce 4 and Quadro 4 as
-        # CVS XFree86 support them now in 4.2.99.2
-     - special options "externDisp" and "internDisp" for NeoMagic cards
-       together with CHIPSET
-
-* kudzu 0.99.69 (redhat 8.0) vs 0.99.83 (redhat 8.1 beta1 phoebe)
-  - don't read eepro100 entries from the pcitable
-  - handle compressed modules
-  - many changes in PS/2 mouse detection, and handle "intellips/2" mouse
-  - changes in PnP serial modem detection
-  - use "udf,iso9660" option for cdrom entry in fstab 
-    (note that comma separated choice of filesystems *is* allowed, though not
-     documented in fstab(5))
diff --git a/docs/diskdrake.TODO b/docs/diskdrake.TODO
deleted file mode 100644
index e6f2da038..000000000
--- a/docs/diskdrake.TODO
+++ /dev/null
@@ -1,23 +0,0 @@
-- test what windows can handle (the number of partitions)
-- better keyboard focus handling
-- end sector in Create
-- add warnings for scsi drives if you create more than sdx15
-- the information put in save/restore partitions must be cleaned
-(remove mounted/formatted/..., also remove the Data::Dumper dependency)
-- test, test, test
-- do not allow swap partitions above 2Gigs
-- wanting the first partition to be extended is not used
-- maybe warn if a mounted partition change of dev number
-- text version
-- better error handling (what to do if we find a bad partition table?)
-- display the information about the correspondance color2type
-- handle the partition labels (missing information here)
-- add comments in the code
-- add documentation
-- handle the `luke' case (main extended partition must be extended)
-- ability to batch actions (like chained moves)
-- add a verification after fdiskReadPartitionTable that the start_cyl,
-end_cyl... do correspond to start and start+size. For the moment, this
-information is just discarded :(
-This verif can't be done in fdiskReadPartitionTable as start is relative in
-extended partitions
diff --git a/docs/drakfont/Makefile b/docs/drakfont/Makefile
deleted file mode 100644
index b70b4a0c8..000000000
--- a/docs/drakfont/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-#
-#        Project   : Projet  Libre
-#        file      : pki.tex
-#             Date : Thu Jun 21 19:26:19 CEST 2001
-#   (o-       Id   : DUPONT Sebastien
-#   /\        mail : <dupont_s@epita.fr>
-#  Y_/___________________________________________
-#
-
-RM 	= 	@rm -f
-
-CD	=	@cd
-
-ECHO	=	@echo
-
-PRINTF	=	@echo -n
-
-FILE	=	drakfont
-
-DVI	= 	@dvips -j0 -Pcmz -Pamz -o
-
-PS	=	@ps2pdf
-
-LATEX	=	@latex
-
-normal	:
-	$(ECHO) '/*--LATEX--*/'
-	$(LATEX) $(FILE).tex
-
-all	: 
-	$(ECHO) '/*----------latex -> dvi -> ps -> pdf------------'
-	$(ECHO) '/*--LATEX--*/'
-	$(LATEX) $(FILE).tex
-	$(ECHO) '/*--DVI -> PS--*/'
-	$(DVI) $(FILE).ps $(FILE).dvi
-	$(ECHO) '/*--PS -> PDF--*/'
-	$(PS) $(FILE).ps
-	$(ECHO) '/*--That s all--*/'
-
-
-ps	: normal
-	$(ECHO) '/*--DVI -> PS--*/'
-	$(DVI) $(FILE).ps $(FILE).dvi
-	$(ECHO) '/*--That s all--*/'
-
-pdf	: ps
-	$(ECHO) '/*--PS -> PDF--*/'
-	$(PS) $(FILE).ps
-	$(ECHO) '/*--That s all--*/'
-
-clean	:
-	$(RM) $(FILE).toc $(FILE).log $(FILE).aux *~
-
-fclean	:
-	make clean
-	$(RM) $(FILE).ps $(FILE).pdf  $(FILE).dvi  
diff --git a/docs/drakfont/dia_srcs/drakfont.dia b/docs/drakfont/dia_srcs/drakfont.dia
deleted file mode 100644
index c4502a12e..000000000
--- a/docs/drakfont/dia_srcs/drakfont.dia
+++ /dev/null
diff --git a/docs/drakfont/dia_srcs/drakfont_install.dia b/docs/drakfont/dia_srcs/drakfont_install.dia
deleted file mode 100644
index 737c19b9f..000000000
--- a/docs/drakfont/dia_srcs/drakfont_install.dia
+++ /dev/null
diff --git a/docs/drakfont/dia_srcs/drakfont_uninstall.dia b/docs/drakfont/dia_srcs/drakfont_uninstall.dia
deleted file mode 100644
index c06f92dd6..000000000
--- a/docs/drakfont/dia_srcs/drakfont_uninstall.dia
+++ /dev/null
diff --git a/docs/drakfont/drakfont.jpg b/docs/drakfont/drakfont.jpg
deleted file mode 100644
index 898dfe440..000000000
--- a/docs/drakfont/drakfont.jpg
+++ /dev/null
diff --git a/docs/drakfont/drakfont.tex b/docs/drakfont/drakfont.tex
deleted file mode 100644
index bbc936e5b..000000000
--- a/docs/drakfont/drakfont.tex
+++ /dev/null
@@ -1,152 +0,0 @@
-%\documentclass[pdftex]{article} \usepackage{hyperref} . 
-%\documentclass[pdftex,onecolumn,11pt,oneside]{article}
-\documentclass[onecolumn,11pt,oneside]{article}%seminar}
-%\usepackage[pdftex]{hyperref}
-\usepackage{isolatin1}
-%\ifx\pdfoutput\undefined
-
-\usepackage[dvips]{graphicx}
-%\else
-%\usepackage[pdftex]{graphicx}
-%\usepackage[pdftex]{hyperref}
-%\usepackage{type1cm} 
-%\fi
-%\pdfoutput=1 
-\usepackage{color,graphicx,shortvrb,epsfig,verbatim,tabularx}
-\usepackage{url}
-\usepackage{hyperref}
-\urlstyle{sf}
-\usepackage{fancyheadings}
-\usepackage{program}
-\usepackage{ulem}
-\usepackage{amsfonts}
-\usepackage{xspace}
-\usepackage[english,francais]{babel}
-\pagestyle{fancy}
-\newcommand{\trtitle}{Drakfont\\ fonts importation for mandrake linux}
-\DeclareGraphicsRule{.ps}{eps}{.ps}{}
-\DeclareGraphicsExtensions{.ps}
-\renewcommand\star{{\ttfamily*}}
-\let\package\textsf
-\newlength{\gxlen}
-\settowidth{\gxlen}{\package{graphicx}: }
-\newcommand\gs{\makebox[\gxlen][l]{\package{graphics}:}}
-\newcommand\gx{\makebox[\gxlen][l]{\package{graphicx}:}}
-\MakeShortVerb{\|}
-\begin{document}
-\title{$Drakfont$ fonts importation for mandrake linux}
-
-\begin{figure}%[ht]
-\begin{center}
-%\caption{Exemple d'image}
-\mbox{\epsfig{file=mandrake.ps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-\end{center}
-\end{figure}
-%\begin{figure}
-%\begin{center}
-
-%\end{center}
-%\end{figure}
-\author{Dupont Sebastien \\ sdupont@mandrakesoft.com}
-\date{05/10/2001}
-\pagestyle{myheadings}
-\markright{\scriptsize \trtitle}
-\title{\bf \trtitle}
-\maketitle
-\section{drakfont Future Overview}
-
-\paragraph{Fonts import :\\}     
-\begin{itemize} 
-\item pfb ( Adobe Type 1 binary )
-\item pfa ( Adobe Type 1 ASCII )
-\item ttf ( True-Type  )    
-\item pcf.gz		      
-\item Speedo		      
-\item pfa ( Adobe Type 1 ASCII )
-\item ttf ( True-Type  )    
-\item and Bitmap (PCF, BDF, and SNF)
-\end{itemize}
-
-
-\paragraph{Features}                
-\begin{itemize} 
-\item Install fonts from any directory
-\item Get windows fonts on any vfat partitions
-\item UN-installation of any fonts (even if not installed through drakfont)                
-\end{itemize}
-
-
-\paragraph{Support}                
-\begin{itemize} 
-\item Xfs		      
-\item ghostscript \& printer 
-\item Staroffice \& printer  
-\item abiword		      
-\item Koffice, Gnumeric, ... studying
-\item all fonts supported by printer
-\item ( aliases by RENDER in Xfree86 .... -> later )
-\end{itemize}
-
-
-\section{Window interface:}
-\begin{itemize} 
-\item
-\item Fontselectiondialog widget
-\item Command buttons under Fontselectiondialog (like the actual frontend).
-\item Commands buttons:	      
-\item import from windows partition.
-\item import from all fat32 partitions and look for winnt/windows/font
-\item and import all (delete doublon) but don't import if already exist.
-\item import from directory     
-\item look for if it exist before for each font and not delete the original.
-\item (replace all, no, none)
-\item expert options:	      
-\item ask the directory, and look for if it exist before
-\item if it exist ask: (replace all, no, none)
-\item uninstall with list per font type
-\item Expert additional switch
-\item option support:   ghostscript, Staroffice, etc...
-\item check-button. (by default all check)
-\item Printer Application Fonts Support...
-\item check-button. (by default all check)
-\end{itemize}
-
-\section{Command line}
-\paragraph{Font Importation and monitoring application\\}
-\-\-windows\_import : import from all available windows partitions. \\
-\-\-strong         : strong verification of font.\\
-\-\-install        : accept any font file and any directory.\\
-\-\-uninstall      : uninstall any font or any directory of font.\\
-\-\-replace        : replace all font if already exist\\
-\-\-application    : 0 none application.\\
-                 : 1 all application available supported.\\
-                 : name\_of\_application" like  staroffice for only this one.\\
-				      
-\section{Graphics}
-
-to visualize the conceptual graphics please see:\\
-drakfont.jpg\\
-drakfont\_install\.jpg\\
-\& drakfont\_uninstall.jpg\\
-
-
-
-%\begin{figure}%[ht]
-%\begin{center}
-%\caption{Exemple d'image}
-%\mbox{\epsfig{file=drakfont_install.ps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-%\end{center}
-%\end{figure}
-
-
-%\begin{figure}%[ht]
-%\begin{center}
-%\caption{Exemple d'image}
-%\mbox{\epsfig{file=drakfont_uninstall.eps}}\\ %,height=1in,width=2in}}\\
-%\mbox{\epsfig{file=carte_.ps,height=1in,width=2in}}
-%\end{center}
-%\end{figure}
-
-\end{document}
diff --git a/docs/drakfont/drakfont_install.jpg b/docs/drakfont/drakfont_install.jpg
deleted file mode 100644
index 795a5a711..000000000
--- a/docs/drakfont/drakfont_install.jpg
+++ /dev/null
diff --git a/docs/drakfont/drakfont_uninstall.jpg b/docs/drakfont/drakfont_uninstall.jpg
deleted file mode 100644
index 711f28e77..000000000
--- a/docs/drakfont/drakfont_uninstall.jpg
+++ /dev/null
diff --git a/docs/drakfont/mandrake.ps b/docs/drakfont/mandrake.ps
deleted file mode 100644
index 1af9d5bb4..000000000
--- a/docs/drakfont/mandrake.ps
+++ /dev/null
@@ -1,534 +0,0 @@
-%!PS-Adobe-3.0
-%%Creator: GIMP PostScript file plugin V 1.12 by Peter Kirchgessner
-%%Title: /home/seb/drakfont/mandrake.ps
-%%CreationDate: Fri Oct  5 18:28:29 2001
-%%DocumentData: Clean7Bit
-%%LanguageLevel: 2
-%%Pages: 1
-%%BoundingBox: 14 14 424 84
-%%EndComments
-%%BeginProlog
-% Use own dictionary to avoid conflicts
-10 dict begin
-%%EndProlog
-%%Page: 1 1
-% Translate for offset
-14.173228 14.173228 translate
-% Translate to begin of first scanline
-0.000000 69.000000 translate
-409.000000 -69.000000 scale
-% Image geometry
-409 69 8
-% Transformation matrix
-[ 409 0 0 69 0 0 ]
-% Strings to hold RGB-samples per scanline
-/rstr 409 string def
-/gstr 409 string def
-/bstr 409 string def
-{currentfile /ASCII85Decode filter /RunLengthDecode filter rstr readstring pop}
-{currentfile /ASCII85Decode filter /RunLengthDecode filter gstr readstring pop}
-{currentfile /ASCII85Decode filter /RunLengthDecode filter bstr readstring pop}
-true 3
-%%BeginData:        29637 ASCII Bytes
-colorimage
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-bl7e@q"4E6s+13Ds*t~>
-bl7e@m,@els+13Ds*t~>
-bl7e@T5=@Ts+13Ds*t~>
-c2RqDnG2D<JcC<$U&TW~>
-c2RqDl/9_PJcC<$U&TW~>
-c2RqD]71%QJcC<$U&TW~>
-cMn+JnG;n/i;S<-JcDJEJ,~>
-cMn+JmbuTmh#;m)JcDJEJ,~>
-cMn+Jie^A<a8UYiJcDJEJ,~>
-cMn+DnbMk)f)($uJcDJEJ,~>
-cMn+DjkIhQchi:nJcDJEJ,~>
-cMn+DST5n_V>GiDJcDJEJ,~>
-ci47Jn+l_KeBdl?s+13Es*t~>
-ci47Jkhjh)WP\C\s+13Es*t~>
-ci47J^4K&h%!hSus+13Es*t~>
-d/OCNnbW%Rn_2+VJcC<$UAo`~>
-d/OCNn);p@^TP0>JcC<$UAo`~>
-d/OCNj+q1n%LcV6JcC<$UAo`~>
-d/OCHnG2eMo&%LUJcC<$UAo`~>
-d/OCHjkS+u^p135JcC<$UAo`~>
-d/OCHTl`:/%Lk8_JcC<$UAo`~>
-lMgqbp\sLY$2s;fp\"1NjN$P:s+13Es*t~>
-lMgqbp\sLY$2s,He&K8A[BAeGs+13Es*t~>
-lMgqbq>T^[$2r)%;B-/V%3+S`s+13Es*t~>
-li.(dk/mMerri>mqY9a_oE+4!k(3P`s.]OD~>
-li.(dk/mMersJbqin;Gk_SWgdk(3P`s.]OD~>
-li.(dmFhC'rsJbkMeO[R%M'!Pk(3P`s.]OD~>
-m/I4fjeV8=m/I1an+l\UoE4C(gAQU&JcDMFJ,~>
-m/I4fje_>>m/I4bjk\5#rk\cKUso9ns+13Fs*t~>
-m/I4flbMl_m/IIiWH^N?%Ls!Y%&s2Vs+13Fs*t~>
-mJd@ggl^4WrU'UfrU9RVp&4Lbm*a;WJcC<$U]5i~>
-mJd@gglg:XrU'UfrTiCk`r3aV];N^FJcC<$U]5i~>
-mJd@gjg<_0rU'UfrR6L%+8lZO%1J$fJcC<$U]5i~>
-mf*Iik)["5qX+:crq-'^p&+Famb#_TJcC<$U]5i~>
-mf*Iik)d(6qX+:drq#.'b/=1p"21eLoR[$ns.fUE~>
-mf*IilEnChqX+:drp>Y\/e\'l!Xrf8JcC<$U]5i~>
-n,F"!nYD2sp&>!hp%nOYp@\.TrV6BpqX41Qqt(!\hT52;s+13Fs*t~>
-n,F"!nYM8tp&>!hm-F!$l0Rm2rV6BqqW?VZ`;IIS^p(69JcC<$U]5i~>
-n,F"!o>7BVp&>!h[uQH0T!cSkrV6BqqQkK3(&JIB%70K7s+13Fs*t~>
-n,FI)^NR3SrVuomhY$U:q"X[\qY0^VpA+[ds82B`p\"CT!oq>fJcC<$U]5i~>
-n,FI)^j!BUrVuomg;hIdf%Jg6kNM-qn+?PWs82-AeAqF&!jo2uJcC<$U]5i~>
-n,FI)d@e5>rVuom_BM'9>A8)$G_hZm`nC%as80]m<Zq5K!Y$ODJcC<$U]5i~>
-nG`[jf8YC8q>UBuqVJd?m.L&NpAajeq#1!kp%eIZp%e4]kKW1@s+13Fs*t~>
-nG`[jf8YC8q>UC0qVJQ`]>_n8c-Xnhg"Y?>kiqElf#bi+_?.6OkCNYas.fUE~>
-nG`[jhm8^'q>UC0qVI;C%2gQM4%)eE@rZaAKVFlk?7QZc%Kd4N"m:I:JcDMFJ,~>
-nc&gmm]UN9m/I"a#6+8C]\r,HrUg-_rq??c!VZ3]oE4O8iVnE.JcDPGJ,~>
-nc&gmm]UQ:m/I"a(&mjRYd1mV_SX4/`lQ?JcdC7lcH*p!_?7KSh>W!*JcDPGJ,~>
-nc&gmnApp+m/I"a(&mjRCCL^_%M'-d*@NX&6:t6X5:%$?%Km:P%*&9ts+13Gs*t~>
-nc&dibD(8oq>C6srp\(Nj6cI(oE4^PjnOE,JcDPGJ,~>
-nc&dibD(;pq>C6srp\(:[(O6N_?7]o`5D>d"2VXrpjrHrs.o[F~>
-nc&dif<14fq>C6qrp\&r%J^M6%g3L](D78P%KT)pJcC<$V#Pr~>
-o)Apnm'1H"lMg\\#6!f&dH0iglLY2OnG*"XrsA\uq"XjgqtB^[JcC<$\c70~>
-o)ApnmBLT$lMg\\#6!f&\@0,fm(rqD`5^X+rqQL"rpo1Err;l[jSON.JcE:\J,~>
-o)Apnm`LrrlMg\\"T@T$+q<fI"VDOmC#f3frsA\WEU3W(qji66JcC<$\c70~>
-o)Amjb*?Map%eUlqr>9CjmVg,oEY'_p\"4Rr;QWo$2s&VmeZnNp>>Uqs+13\s*t~>
-o)Amjb*?Pbp%eUlqr>2i[_BTE_?e'"cIM%Anb`=`rsAYegtV](lHe5ZJcC<$\c70~>
-o)Amjf"$U`p%eUjqr=df%I4K1%hp3M>Ci]roD\[f$2s$mBDVSN(rc6#s+13\s*t~>
-o)Am`[;pHKrV6BrptE13kO@d/(%q:pq"X[Yp%\Lcs8M65p?qSEe(skOs+13\s*t~>
-o)Am`[W6TMrV6BrptE!V\A.@H(;n2:dFR%+k3DR:s8W)^b0fDEf>-5=JcC<$\c70~>
-o)Am`bFssSrV6BqptC`;%I4K?%hp-C8mQ7RKs0)+s8W)^Q8?5H>YX&NJcC<$\c70~>
-oD]!me>?o:lhCD`rq+[OhWjXqo`+Uap(-omq"aUUq=E"uo]5Yem/DS9JcE:\J,~>
-oD]!meYd,>lhCD`rq+[DZ+@a9_A'o,aNMlWf%T6KmIg(uccXqbaR&nWs+13\s*t~>
-oD]!mgr,DGlhCD_rq+ZT%1VS4'b:op,r7b[?>XPE\DZu+?7Vct]^5WKs+13\s*t~>
-oD]!f^6W?3nb2terp\+KipH=!o`+Uap($ilq"O+(guI)Go(DbUrdk*#s1JA^~>
-oD]!f^6`H5nb2terp\+:Zb4-;_@si+aNVuZf\>QHa2#=.eDfTZqu20HJcEC_J,~>
-oD]!fcFJk?nb2tcrp\*'%H\-7%h]a,2F:;PDg@Us1*L+oT;9Krrdk*#s1JA^~>
-oD]!]YCC#np\"OjrThAHk3qp%o_nFnp@?/4i8NJDeEQYKc-"5QrlP;YVY^&e!rCEmrQ58a`3ciI
-d/OCNp#k&U\;/o>h#@ZZp#k&V\rFr4iVs>cn`8KObf\)MdFe!gir92]puU2Tbl5cb^&\&$s*t~>
-oD]!]YCC#np\"OjrThA1\%]]>_A'o-aN2ZXdCHg.]=keag\&b7bKS30b6#MWqY1!kqUNslb6?&0
-`3ciId/OCNp#k&U\VT)@h#@ZZp#k&V]8k/7iVs>cn`8KObfe/NdFn'hir9DcpuU2Tbfe2P^V9T9
-s*t~>
-oD]!]aJt!3p\"OhrTh?P%H@p+%hp!3-mB]:J%7BArWNL]p"S9UgY;_]!n>*`p\t<kinaRe"PMAM
-b59Qc#laScjPJ7fjo4'8#laScjPS@lgAU"1%0#nbjk\\Fg=b?Co`!kM"oe>aj5&JhgAfS$qjmb;~>
-o`#-pfr/arg&(FA"oIDohWO@goFpf^hTE^[d+I+3\@B)hioYiBMk'a<!fM0fq#:d$hS6+`T:M*e
-C1Mkcdf0[Qg;:S9ZD;SVjSds8$N8Ym]Xb>FH>(\%jSoMbptsB7]<eK2rgs@hW2mGdrT4%`rTDG@
-ZDXGrT)saenX]]1~>
-o`#-pfr/asg&(FA"oIDmZ+.O/_@s_sYb@bpYJAE'\@B)hioYlDMk'a<!fM3gq#:d$hS?1aT:M*e
-C1Mnddf0[Qg;:V:ZD;SWjSds8$N8Ym]XkDGH>1b&jSoMbptsE9]<eK2rgs@hW3!MerT4%`rTDG@
-ZDXGrT)safnX]]1~>
-o`#-phSl(>g&(FA"T.;a%1V;,rs]MI#nAC@F#gb?\]3XkXJrM=rP&E>SaH4P%/o8;a1oC'[\K.H
-S+>#-$N9&:eC)RXUQ4F6hZ!r]j3uH'bep?>eGA8+#laY_hUg0!`PMPg"iA7"cKP5grs&Ggh:9`f
-_>_1NY+"mOs*t~>
-o`#-k`1LULi;W?J"o6r`jR)O$oH!MhhT2q%V6%_Zamms?io]goWKMCCDf9T7A7i^Wq>Uls_PM^#
-EG/W[H],6!df0[K[s3%5GACN#iVq^6$MV#aF)?#9>[lFajo6"lim#-6Ob7puCMe$3G'nq%P-t2M
-rseqc_lA`EF(f,p@pNR+qYpZso@s5Bs*t~>
-o`#-k`1U[Ni;W?J"o6r[[Cj?=_B$G(Yb-l2RA-dea2uK^io]goWfhOEDf9T7A7i^Wq>Uls_PM^#
-EG/W[H]5<"df0[K[s<.7GACN$iVq^6$MV&bFDc2;>[uLbjo6"lim#-6Ob7puCMe$3G'nq%PICAO
-rseqd_lA`EF(f,p@pNU,qYpZso@s5Bs*t~>
-o`#-kd(bp"i;W?J"8U`5%HJ$!%2'$U$Vu+1*4lc6i8Wnik-LYHT`1PdTU(S\rV?I%p=$pYT:h[3
-H]"0#n'_4CpW&ntT;8$8L>i-grsJMAUn"!NSr/*QqrRhkr9<%c`3ueET:MRGTqnTfZa\-TkPl"i
-kL[_[W1f]IQ'I8]k5,)[rq>LQW;hA~>
-o`#*d[?tH4iq!*Orq+U^kO]kem,#gfX.uc3c/-+Vg@4Y3s8V`JaII`jBOk^aA?5P&rseqYZA*4-
-An"tc][5[4df0XJgUa)+DIZpqkM?.FpYNZaKQL^.E9$r[rtYF__PW-/@pN2?>?b?@A7fLoF`b+j
-kl1kZ]qg0nA7#49!`N1[rVm*#m+]aaPkD!TJ,~>
-o`#*d[?tH5iq!*Qrq+UM_o(`U+2GLmT8\SmWkcK^ZHL,*n,E@eo\RZZIq35'An#;Pq>1+#rR\?0
-D.R<g>][R)iqLn$$2<2cTmU`f>^5GfrsJMW^Sup0@p<p4roX4qqq/c_LiHp1=B\p5>[_/TBQ/*:
-\,>Ii%J7B1J8/V$='/O*;cr&Xrs&Gggrugaor.n@~>
-o`#*daL[Uhiq!*Qrq+T=&eX=;rs]qU$49S'^m5IRb>Su4rr<#jhT2duQC+#+P`30KqYq$'hor9p
-R$j.jL:kmmpX9'JpY39ST:_@%Np#6u$MWDlWLorNKS\[fk5Q1nimu&PTTkChKS>2>Od;B(T;/.&
-r94.io[1OUS<f1eIXHKcG2iK##6"&QgW-\oW;hA~>
-o`#*_Y**4%ipm$Orp7u)p$;5no'G5SYcFP#`80S<da$mpg!]Zqs8DcYY`!(2BkCmdRIp@U%J7;r
-C2Rg"@9\fPp%n[9rsAYqkKfKE@U+lYh>[f[o]t&"L1=JFlK8*_qpN'DH"C;]<*!I??<^cDA7fIh
-AT[29lMhb#f;aXCARA><Dg6PQL$&F8rp%YE[[qAdm&9r7~>
-o`#*_Y**4&ipm$Orp7_N`p:Jb^q6hCN/3h#`80S%YKl1M]Wh22s8DcYY`!(3BkCmdRIp@U%J7;r
-C2Rg"@9eoRp%n[9rsAYqkKfNF@U+lYh>[f[o]t&#L1=JFlK8*_qpW-EH"C;]<**RB?X-rFA7fIh
-AT[29lMh1hf;aXCARA><DuP"jL?AO9rp%YE[[qAem&9r7~>
-o`#*__mY_]ipm$Orp619+6j@9%3>la$;[D7h<&&XcK!"r-M[W@rV>`pZBLK>R$E]4o_SRso[(%8
-R%0S,JXtfnqYnqC$2sJYcaTp<K:M;arsAYrld`SMP_,=gk5Q7phU/s3R#QQ;FaJO^I"dTHR$jJ2
-Rd9t<rsAY\`iu#$O*Z#%reLuJk5YJ\mb?C>^7Lk]W;hA~>
-o`#*ZUkW8cipcsMp"fB8mIV+`m,#gfX.uc7h=(70ftQD>j2T+,rVm5nY_6SBEG/onK^em=$iSSQ
-AoDX/BO>#Io$.1>roKu.@9o]!gA_B@WJ4hdV"!RI)#`C(R!*(K;HJLGZF-p8L1t./AnPUc]DUso
-)>M+?H=pbn?DG-N`Pp?ss8VuHXd"9O@X..9s*t~>
-o`#*ZV1rAeipcsMp"%[8mD9RQ]<IodLmP-[h=(70^o$&bj1r.lrVm5nZ%Q\DEG/onK^em=$iSSQ
-AoDX/BO>&Jo$.1>roKu.@:#c"gA_B@WeOqfV"!RI)#`C)R!*(K;HJLGZF-p8LM:70AnPUd]_q'p
-)>M+@H=pbn?DG-N`Pp?ss8VuHXd"9O@X74:s*t~>
-o`#*Z_lo/TipcsMorV=Eljj%)&ISpQ:SPe`n,)Q69AoU*Sm:^^rsJ57Xc8[=R[9,,nGE4nrS5>X
-Od;]1Ne"S/c2S%Jjhn-]K!+Xtrs%],YE=C=nE9fgrT2G=UmR0gG)iE)[BQToO-H$"R?WcQr9F;"
-ps6[OR?rbYV7X[b`ROGXs81Tm\#Gs[PNf%GJ,~>
-o`#*USpk'WipcsMo^2GHmdq7aj3"U,UTDDin,*+anBoYPs7bI*nbrIpl)/<.WHrAm@s759rsSJ2
-I:ACfH"^Ghc1oQ`#Q</JHsU*ip"TKOrR.Hg?!Y;?kPlCl^8$'h@ola#aP>qAk2+1GFD,9!@UY`"
-lMhao^RTFYA7Bc1lgXH7o_\[gps#U\B4YY(l)=W4~>
-o`#*UT710YipcsMo\e<Am_T^R[@rP8Q`A![n,*+anBoYPs7bI*nbrIpl)8B/WI&Gn@s@;:rsSJ2
-I:JIhH"^Ghc1oQ`#Q</JHsU-jp"TKOrR7Qi?!Y>@kPlCl^8$'h@ola$aP>qAk2+1HF_GB"@UYc#
-lMhao^moOZA7Bf2lgXH7o_\[gps#U\B4YY)l)=W4~>
-o`#*U^T!9KipcsMoS[$&m1'g>$OR5:U;YmVqu6WbdF%F_pYacqrVm5h`LVjeVOa*;PjJ;I$hVcD
-Ln(08RYu[Aps&gDrS#,eNe"q<g]%NWg;9eIJ&_3FrttFU_PirgJp*g.gudh_hT2LdS!f\/M6-I:
-ru(IQ]q_!^O-@uWnF?&@qu?]ke&%uMR$+!(W;hA~>
-o`#-TSpXpVgA^[C"T@]_p\""I$M!,kX.uc7h=(7?rr39#nF?DUrqQ0`rr3B*gRr(l_2W\Q@;"d$
-rs\kUW+'bVOa^kHB&<L2rs/AEVfl9Mg%sJ'#Pc0+F'E),qrn%trnXZ6D.[6aLXGVgrr<#sm`B`\
->$>!/P4JSO$NB_ai7ci8j6?C=rVn,AnE]E#]pj(TASZtFkNV-or9Wb8k/F0@AnGb*cfjZYk3)`H
-s*t~>
-o`#-TT6t$XgA^[C"T@N>dDbRk$Ga!9LmP-[h=(7?rr39#nF?DUrqQ0`rr3B*gS&.n_2`bR@;+j%
-rs\kUW+'eWP($tIBAWU3rs/AEVfl9Ng%sJ'#Pc0,F'E,-qrn%trnX]7D.[6bLXGVgrr<#sm`Bc]
->$>!/P4JSO$NB_ai7cl:j6?C=rVn,AnE]E#]ps.UASd(HkN_3pr9`h9k/F3AAnGb*cfjZZk3)`H
-s*t~>
-o`#-T^Sd0Lh#?mE"T?Pj8f@%,#n77L:SPe`n,*+`rs8Jjnb`@cq"=O`rsSh_^m'YkXJMAJMs($<%
-/o#$Nf(?RWL/KohYk_!#PlogUksTSqV2#Tps-RHLk+4Vkl2P"ilJBrR?NDkdI@&4s8W&caeauPL
-OslIo)8RqrqGmFjQ#7bn,!%^s!.O8nF5Vd]qLj]S#+d)n*KQAnaQ&6d_hlKR@9u)mdKW2mf'BhJ
-,~>
-p&>9rfUI1qAAA*6rr_uaq"=(I#jTO4W5RN\qu6*b%/\5;@X67aIVN;&b5VD?%K>h.I9iVgS:>$Q
-E97)srseu&j4W#8g[4q*f#-ePrVm?+nD;IBrVulhiRu`LrqQL&rp\gma3WGQSnqYIiVrfU$iTGD
-a6`g)o\S-WrVQU'rTr7if@K0ao\.C>rVlg-o=(-$>B&X%s8W)nimu]Zq>V-,le:"AlMgh`q8/\K
-BP(dkW9sT^rr`5OC0CL:32Q3Grq"sk`4`U`XfSb5[(FcZrr;`7_S!FWKl(F7COr.a[$dWS`50!q
-Y)I=3B52a`ZFI90PP;6[J,~>
-p&>9rfUI1qA\\37rri&Tfuh5$_?d`GLo&&Gn,*+Rrs\eJS76chQ@<RWB$1,Prsetr]7!t[aII`i
->B/d(r;R6*puL,ZfA#]jm+92@rr)j+rp\difDYaKo\nKRn,E+^%K>kSdE'\f^7T4HCZ59krsSel
-f>m7Wrq,'tir/cS!r_K>rmqA<rUegbg&:pM&+d8uBNoH9rr<#tpu9oVrV?I,rTi4kf'<87s7sR(
-H>$o$D5ck$r;Qltf5"Rg=?*/Js8MWGcG[H+YcY"3['dNop&>!cb/:m&VhJu"B5<*mZa?0pm)?fO
-]!%'3AnPk)S[,f5R[!QLs*t~>
-p&>9rgq9PJM9,Ydrri%ZC+^+e%L<LO$BrEan,*+Rrs\eS]T/*!ZDj@WMUDG&rsetsc_uAqb.Xg>
-KSegir;R6*q<I#!ioT_.nD`!err)j+rq#=.ir/oVp?CVroD\Ob%K>t_hUpZCcbH$,L#N%0rsSeq
-in3f#rq>O6lM^V[!r_WLro+.MrV#=)jSf)X&+dlSRtQUXrr<#tq<Hu!rV?I,rUAn.iU?dGs7t$U
-Vja$?QaH/Zr;QltfoULXFuZ\rs8M]Rh:U3%b/hWGc-=Vmp\t3eg"4[!`N>`"R@UCobg!f8m+Bn9
-dE/\dR@0SC^<FsK]X.@8s*t~>
-p&>9qe<bGiA\.^/rri;fq=jRMoEO?eX3pA4rpKdpp:Z]!N7jqXD.7%`qYpL'qp)$GD:$7nHsp9;
-li$i-rqG-bVh9;XWO9ORQuhZnrpJ^ob/:HB[J'1A`k&CNP0Nt&ruh:,e%:laFG6?XK4J52kPk5<
-g!RmUUOqY(gr[+(Ls#\qrsnq`b-[7VNMEen_5D=oqYpL+m]_pd>`%bGs8D-*^8cn'rVca4rqG*\
-UR%RPTs=LpoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfH+UlpI\G'/(ZK85MVUXoD3Z^lo'H#IA.
-B52C3Jph<eeu=peJpMEMAnPdpG_(KqBRfHQs*t~>
-p&>9qeX1VkB"Rm1rri;ahU9C2_?RE4UXAN,rpKdpp:Z]!N7jqXD.7(aqYpL'qp)$GD:$7oHsp9;
-li$i-rqG-bVh9>YWO9RTQuq`orpJ^ob/:HB[J'1Aa1ALOPKj('ruh:,e@_)dFbQHYK4J53kPk5<
-g!RmVUP%_)grd1)M9Gksrsnqab-[7VNMEen_5D@qqYpL+m]i!e>`%bGs8D-*^T*"(rVca4rqG*\
-Um@[QU9XUqoX0j'AnG[iJ'@WcrVlruke@"p3O[W8qqfK,UlpI\G'/(ZK85MWUt5M4[%3#(H#IA.
-B52C3Jph<feuG!fJpMEMAnPdpG_(KqBRfHQs*t~>
-p&>9qft+#DNPkS`rri;GI7tRI%L*@LG1#aTrpKdpp<0q%SCt?PSs,,KqYpL'qq8lGL!\,[W02b$
-li$i-rqPR,`2olF`Qm#^\sr*crpo:3gXjTRanGAcg!Rs[\(^fXruh:0i6o0.Trl)DXHnR#kPk;D
-j58S@_Q2qsjkJ/#Yh8pRrsnqigWd+&Zbjr8e\n',qYpL+m_u]%Jskp(s8D<?eAeW;rVca,rqPO'
-_R[J$_9)TSoYn85rg<nYWS.(GrVlruke@"p3O[W8qrZY\_R?YIUnaccXKT%E_;Y@\aM+mZV4X3E
-R@BhGX/VG]f#G5%X/DV[R@0P9V5p_tQ^[?Fs*t~>
-p&>9qh3`IuAXiDbrr_rbq"=%H"QI&9o)A"U*:U4g@'&CoM/d$8Re?^\rp@4;=eXcaRs8=HV""B`
-,Q6oOY@q-TL6-A%LjW]Uk5P%GR[TP$I!M[1Y`jQ^I!fUSo_e_Fqq]5`?s\8GL2:U?@9ecXrRd?u
-QBI#DJ()9=P_4-kL%YKFp!UC%?<qlDE-@"k@q49irr3PoWJFtfV""E_i5)4IFCTpprr4)=jN*g$
-D1d%QHuQ7cnZ7LaAnG^mH'tnN`mNB$me,iCi[s?cpsm0RKlLX0=^#'8?=RSaG_1XmkFcNo?"%;V
-An>FX>?Y-1Gg1_G>$PKHralFG?X-c<=BBS.Y5a"~>
-p&>9qh3iP!AXrJcrri#Ufuh5#_?@3>b4>PuruCO6LL@4DZANX3A"3/ks8MDqFBYBr\XRhO?DR)i
-s!.L-bcb\bCPIpiI#*/[G38esTUVC9N-orM`j(_WH$k!QI.[@:1]-"IT3tuSP_O!hCLLJ,m/>S$
-PEqAeEe)WUY`sc`AqfpXrq4^MJR2W/QuR;)L1=cKqYpL+l)KPJ?)6uirSYPgMf`H\o`"k4rT)%i
-AT!0GEdVi/qsgbCDe<TpCjDGQ^W+[PkjJ-.rSfElo_?tPTnRJs?<LH:>[CoPD0UYebNGR5>[:cL
-AnGU`?<^T8=*`&@?s6fDAH$0H@p`JE>$+jJl)t&:~>
-p&>9qh7BGJO0/-Irri"VC+^+d%Km4Eb4>PuruCOJYD'@D^TaArN32dQs8MH3UO9'!ah4I3K!+VB
-s!.L1grc+;Js;grVm*+\O66H7^q@=jZ`'b5eB>>$V5L5[Sb2j[1]-:d^Q<o(S=,b7SW\Vqm/>nQ
-\%/rNTr-Gkb.+RLPbIdMrq>6rX,)+]TUDUZYEajsqYpL+l,KrjJZeMBrTDbLZ(mDOo`"k4rT`+M
-OGT3hTr=U#qshD(T:)+9SYj!@e(<I8mIKr7rSfj#o_@Cq_6'AqNJ3%>LlR^eSu&Kjg#oo6Mi<gc
-R@0G,NerOFIZr$VOGJgWQC+)-Q&gfYLP:29l)t&:~>
-p&>9ri0S\"A;0RGrri;fq=jRLoE4*fhYld?6gCXi@*J&VNH8W?MXg`Hqok^>C=;@PQZHJ=](Q+'
-rp%Lt?rMQ_`P77JBOP/&l2U+CMfW]JAS$."@r6'lA7f4[l2CX3qprKA=]_$-c+SaGB4,#@nb_+7
-M/R3CCN#8KEbJrj>'B93oZXOW<,AJK_jGIX@p<^+rVuosf;*h$?,H=6hQhEB?sHc`mJm4bi5(4Q
-EjE?WHZ!A@o('&0AS#IdBP_jEO-ucBZ*q3U`p!F%s81?YR<W=O<Duq-Am\kN&Rf6aDJsd;KO7ef
-@q'%^@p2q3<t'#lAm/8?A79%]AR/=6<rm7(Y5a"~>
-p&>9ri0\b#A;9XHrri;`hU0=0_?70AhYld?6gCXi@*J&VNcS`AMt-iIqok^>CXVIQQucS?](Q+'
-rp%Lt?rVZa`P77JBOP/&l2U+CN,rfKAS$."A8Z6nA7f4\l2CX3qprKA=]_$-c+SdHB4,&Anb_+7
-MK!BECN,AMEbJrj>'K?4oZaUX<,AJK_jPRZ@p<a,rVuosf;3n%?GcF7hm.NC?sHfbmJm4bi5(4R
-F0`HXHu<JBo(')2AS#IdBP_jEO-ucBZ*q3U`p!F%s81BZR<W=O<Dut/B4,%P&Rf6aDJsg<Kj\"j
-@q'%^@p2q3=:B/nB3SJCART.^AR/=6=93C*Y5a"~>
-p&>9ri4>bPOe;19rri;8HV,1C%Kd.DhYld?6gDU_K$Nf-Z_<_HU%/0_qq&W>K$ro&\tP+6_"Ia-
-rpACTOEHPj`P8(;RZ`8jl2U+TT9u1=Q^+/*LkgkKQ'm\hl2CX$qr-#2L3B3*c+Td@R?3$'nb_4I
-SX,h7S=?^MQBIJoJro?up"[`^H\&04_kiuoQ%k"NrVuosh8?4OJB%<]jijTgOG\IOmJm4bkLHeg
-KsJ@mVk0*@o('PkR$a;0R[p7U[(F2obKeJ^fC&Y<ruh3rdCZ6COFVLsH[U3kM34-nStDk)UOdT>
-N0K]tQ%s\aFps/NMgBPoMisHqQ]-:hFodB_Y5a"~>
-o`#-UP]^SJEpNAts7??ep$D;Pj2'a@s$ZkAU1IrnpXt[MAn6;Vs8MDpDHa4-l`?4a>@#qYs8MT-
-Uh!JR`T-LO]o6r=>bplho%(RBIqiCm<HOn>XaY%t?!u^ls"s]2]Tc]&S^Zrtj/n,S?<t/8rU&.L
-P(%.V@TRN?IUlARM<ju\Z$BA\]%ZT=bE7$Y?%_A?s!RZ_T6+:JgA'O+AS-3k;,aC]s8ColO^)V7
-i9Sg_H!=\@pX=Lu@:]@L6"akGDfpAVKo(nYS%ALrl+*7-B44b;GbVLOYFBWC@qB:fBnaC,WMYDh
-BP(^[H)@R?YKGP5WMueYFD>Du?YQ>8W<09Gn#l\@~>
-o`#-UP]^SJF6iJu"SCd-ai!M_!jnlbli0BPgnSFnhY5]cF(Ss2mJm1Q[r,BQl0GF5CKk,uqZ$Qc
-`2$pDIDt7:kIupq?sTSts74aUQ[`aY<`X@9ZE8UlAmJj*rr4hRhS#.Z=.Rh,o]**2D-gP[p&4:.
-^6="\A7AY\T7:BM:l=T7bcuFoA\-U`m)tQ:@U4WMrr4AB`h.?WA_Qq9XCZ!i>#A4rn,N@F^l_l9
-^>S>*T6XXLl1`YT@:<^GAjL'CC2\6@J;&iAR%1bbropt^G\:Ga;L,"B[BH'B@Uit^C2&C<YGnCS
-E+iim??rEIWNXIt^T"31P'(MOA7')Iri#t&b3uM5J,~>
-o`#-U[\T=SPO%l@"S@FZ.M;%X!Y#=mli0BPhnbV3hY5^3U6q+2mJm1Rc(B?gl0H9rSV_jLqZ$Qd
-f>Eo"N5aiIkJ4BrO+FJ's74aUW2c>LJ9QgEZE9[fR#H[Xrr4hRjO:SrG,*OQo]*EbSrJ99p&4:.
-^8S$$QAg6HTotC_ELH.gg<6=BICe/#m)uW0PD,:crr4DCdD)H4L"c=`a-)"2J9>q:n,N@Le[C3_
-^>S>*];CF;l1`YtO-,crrg?$?S=cRSWi`M5]"H>crp.qDV4!KrEJUEr[BH3^Ng,p!S!g%fYGnCg
-T:;74KnuV*WNXIt^T"31S>)L@QAU6hri#t&b3uM5J,~>
-o`#0XQ?d.RC=`CXrr`5dq=a^X#P.6Ah:prSnbMeYji6<Gs*X^eS76L"rSWl_B4,B:s81'6??Olp
-kbj/H>\i<ts8'mAH<=RmlhpeYbaWf_?,?77r:T0RP&"9(NPF*,fq*h.>@QXms8MN%Tk.;IdI[A;
-oXpN1>@#qYrqlBKViGOu<-5k$Z=$^Xbja>pN*KGaiVEKOiLka1>F"XUs"!`PRr)P[i7t\PD5jp_
-B:%6Erp[^p@9KJfqu,0MEE[;BrTCV-?<UZD@qGOL3bN,AF*`26p!9XhC1LLJLVhd-kiC=+Iq`J+
-BObeoj5S[aL2U[5?]*IpioKLtl/L^YZ\rm:A7'B*ro+"?mJ=!cJ,~>
-o`#0XQ?d.RC=`CXrri;^h9a+<_?[lg['-X=]"n-Y!k,,gli2A0bFN*_jo+,%G%Y2rl2UY*TO2lo
-punZ2AR'$0rr;i<YBj;Z_s@7#q95@Q?=(MBs8;QOY**R)=H1)Ijk68YAm8d*s8W)f^7f+?Fj]g[
-s7EsjEEcc&qYpBbj/@uR>uc!\d'@(]H-Gd3[u=QoWo<dQrSaH$@9f)crr4M@\XRGDI,NeeB5X`W
-EbLilp\sZtSmbg"j88f-YAm`bjo+ANE*c^S@:NmGAiaR<CNFfKX7af>JSJ_!<JSHFk31mW\pnF*
-AnY[i_W0Y-Tn[Jt@UG#Eio9%do',/nh6`,^An57idf/5-jR)fHs*t~>
-o`#0XZDF%TOkTg.rri;6GXNAF%fQn=$k3[@%K[(Cip6Vlqp`<?MWOfp[%s+OMs:9=fYE<!fD+RK
-YEt#uiVrlRfZL+DHc,1Is7t*VUlBoEpAb'`jhS?rLj56#fB(\kXI4lrj8]/Yo$Y@AI>H;Brr;W3
-\Y+e/g%t^Fp#EcnSVqcK^<j<AFc+E4iQnfeGcp$$rr(fjX-/%/mf*5;oZ=b;N0iJ`c'<p^[>9=)
-fD#:7e\@5mXQ03Vh8u@BLZSKt\W)?!NKKHlR/<:3R[p1NVo/2[a/b\qLj#!!g?.V[f".<;R$jD.
-P0)bDf<h]QR?NDqfAbfNmIKN$in_;RTp_4(MphUa!p&bFY5a"~>
-o`#0\SpbBcC8q('s8V]lq"=XY%.`iKfuLG"XLZ^>n+6GK"6[b[rp9Y=p:Z`"MX1<)Q?m4QA^gVB
-[r,BTm/>M0IUZQ1kl:YD[?G'&OQ-0;s7sX)F';l'qu6UAn$/*h>B%aLq>TigP@e$<jo>AXd]\:.
-=gIAms8V`'Rr2JHiVriV+7#tfA63'HjRh6#W5n/m\tE_>E7O^_s8LoOJ6uQaoD\bEn#qskCQ?fU
-NHDegi5i[anbr@/Y'aSseG&t.`0FV+L["j6hQqZ;=^"s4>$P?@@V#IM->.(*HI]WtFCnucBufQ:
-rr;umj0s>IAnPXcTDANWY`Ed9@UPDiq>U`q`g(a[A70WGW;hA~>
-o`#0\T7(KdC9%.(rr_oSfZF-0%)KWdXe(W3Q'8&Q^;9]`"1Y&Urp9Y=p:Z`"MX1<)Q[3=RB%-_C
-\8GNVm/>M1IUZT3kl:YD[?G'&OQ-0;s7sX)F';o(qu6UAn$/*h>B%aLq>TigP@e$=jo>AXe$"C/
-=gIAms8V`'Rr2JHiVriV+7#tfA63*IjRh6$W5n/m\tE_>E7O^_s8LoPJ6uQaoD\bEn$&$lCQHlV
-NHMkhi5i[anbr@0Y'aSteG&t.`0FV+M!=s7hQqZ<=^"s4>$P?@@V#IM->.(*He#`uFCnucC<,Z;
-rr;umj0sAJAnPXcT_\WXY`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~>
-o`#0\[&KU_Q+HhcrrhtK@jhld%L<LP$OR1D$4IC>%Kd.J\,Pao0_W]"MONl2k-LqSP)Iuklcu,M
-[d<tJ_5WZQP3DrFkg$Z$I@K6ns8VoA^7pF4gACmL-1Aj`R"U19l1t>I_7,hcM<4d;qqK5oML)_s
-rr<#jah44$L#N%1ru^RG[$H5f\`ED<WN+#'n^"t>JVDYKs8W)W_Q&ZH[e'Lu1@N2lSX6>,e$G.J
-h;HAhf(&_9fZC(LMq%M#maeq,FI27lptiE>I=$HqL51YFO->otrg>(&RAS]_]q_!ZJq:u.qu6Wp
-puAo]R@'D.NjAK\n\MT+R?WN'nbN1jps-FGR?ieol)=W4~>
-o`#0bY^gP%AUF"BrtYM!q=aIQn`o#X]W8'.Uo1&mdH'cfr:C*SaOC%Qs!@0?Lg[%Js6HG3Cgq%n
-ouW_1FkQTeb+Eug>E%qKqSoF\>[52<rr35r]:3S@DrUcqru1.$M.9eIk5G>[n#qsd>`%bGs7Edj
-C0PN+q>UBun?A-h>^,B1ruh="Vh8A[No'X3o&/HpqV830@9]8err<#sd%GYh?IeiMs$GtLMJI3l
-WL\$Lh"gg9me6VZn[4^#D4p%Yf"HrE;.[o@s8McQa0:YNB4=qD<`r[6@:a%_B4Z"YTnR;p@9eiS
-rVZ[/q:UdLB4b[`MXpf;Y`Ed9@UPDiq>U`q`g(a[A70WGW;hA~>
-o`#0bY^pV&AUO(CrtYLoh9a*W^Ug\GQ&(ZkTr4WYVR=.Sr5&QGT?[9"s!@0?Lgd+Ks6HG3Cgq(o
-ouWb3G1l]fb+O&h>E/"LqT#L]>[52<rr35r]:3S@E8plrru1.%M.9eIk5G>[n$&$e>`%bGs7Egk
-C0PQ,q>UBun?A-h>^5H2ruh="W.SJ\O5Ba4o&/HpqV861@9f>frr<#sd%P_i?e+rNs$GtLMJI3l
-WL\$Lh"gg9me6VZn[=d$D4p%Yf"HrE;.[o@s8McQa0:\OB4G%F='8d7@:a%_B4Z"YTnR;p@9noT
-rVZ[/q:UdLB4b[aMt6o<Y`Ed9@UPDiq>U`q`g1g\A70ZHW;hA~>
-o`#0b]W7TkQC[U@rtG@EGXN>X%LijU$ORA5O/J%.$k<%C!t>X6qs=>/nA_\eY42JW[]>s`O3@4I
-]n_Htq>/RTVNHG#m/Qq2`2AK?`Uj*/#PH6PSV;mZrr2p9l,KrlJskd"s8VQ,\<_`7lMpnVbe9O"
-K\-&!rs%u3\=&&2kPkK(ro:quO+!JRqYp'Di:$O$aKUeVVX"0\s8CQbV2BfRq#::Ll,9itTWQ2I
-TTe1,qXEqHrVuE4\t5=nk4.H[Z&!FLb4>T3pZ';uR#$3<G'/"VK8PhYrg=.\T"De@SXGUlSE9_I
-rtG4]XJ2,NQB%[0s7*q4Tp_.$V"+9\#l)]UUm[O-Om/hEJ,~>
-o`#3jbCF>>ASnsUq#CBd'DV7gjOV8SX/2Yr_q3baZ*MsCnGMn\kK)$Fm/JBsWH)@^pAaWdLi?m?
-V;AUk=gIDnot?l=?X0]'s7*C\C0YK.qu6U"n?A-g>_D;?rs/PTUjlcWV"+Ha&F-<R@9]Mrs8M,[
-M.9eHkl1S]#4&4H@pFuZrr3`3dA)"m>f6.3s8DinrqXF(H<spup&=t,pq`M@>@ugls8W)RV1E2e
-Dfg)5C;'TDs!%ElW.SVlHC1@VA6;lY^#f.ks8Mocj4)&ZZE0a]K6:j;@fBsHA8HgPF(f/o@'0"s
-rtGCrV1reuA70`Ns7*=SEFrZfPO\JK#l)E)G@kAnGNl(+J,~>
-o`#3jbCOD?AT#$Vq#;*$jOhPe[Ao^TLm4C4_q3baZ)=V2^\kqN\=^n<m/JBsWH)@_pAaWdLi?m@
-V;AUk=gIDnot?l=?X9c(s7*F]C0YN/qu6U"n?A-g>_MA@rs/PTV12lYV"+Ha&F-?S@9fVts8M,\
-M.9eHkl1S]#4&7I@pFuZrr3`3dA2(n>f6.3s8DinrqXF(H<st!p&=t,pq`PA>A)mms8W)RVL`;f
-Dfg)5CVKcFs!%EmWIn_mHC:IYAQW#[^#f.ks8Mocj4)&ZZE0a]KQV!=@fBsHA8HjQF(f/o@BK+t
-rtGCrV1reuA70cOs7*=SEFrZfPO\JK#l)E*G@kAnGj21,J,~>
-o`#3jcDmA%R$u+pq#;'#L1;M>%1EUO$8Q4s_q3bg[V$!Xq[N];$_d@^s!?sKU4UDYs7!b+T9bhU
-iQdg:[d="dbIs^4J@+nIn]AA4LP4I[rr32l`OM7fQ0J;J#QEPsWfVe7nc&P"lGg)kJ?JDAro_;*
-P_,:drr2p%lbg&oK:M<-rtYLb_PW3<`Ua$.rVQQmq9ZpSNI].Drr3c/cG#s,KAc_.s8LonX-f*A
-U8+-@b5M8<0`BeGXI#0H]>1J/H?G(Xjno)Xrql6GeA]#)XJ;/DLPLnSR$jA-RA@$\R[K:l[IX4p
-'E77+Y+:uHN0N`0n\MT+R?WN'nbN1jps-FGR?ieol)=W4~>
-o`#6qhi2JbBP;n\rqcX2rTs@QiQJ^2WMHN)cJe6bqt/mh\(g-:rU^3Ub0]qNs!Ia#U1@`equ?<%
-MfWKKPI?KVHeJ5pn?A-r?!bbLs66G:A6jWHrr2p%l`,nQ?(CB_ru1aRT6O[J_=mp/rn!uq?!YVI
-s8C?>I:6K`nbrIlk,*c>?)7#irs/;5So@qLh#%!K#P"s\DHgE%r;Q^#o!Oiu>B]0.rs\eJTm:$G
-@q]FcB8?0Xs"O5]RWMk;>[1HHEJ1:2jQkXVf\"]ol1a`6kMtCKbe^K:DeN`p@V0q-C1_'eA@D7/
-rt=e+P]:;G?Ztc8nZ\'oAn#/3nbN1jpr8SCAn5:nl)=W4~>
-o`#6qhi;SdBP;n\rqcX2rT2eVZ_ES<PaA5XcJe6bqt/mhXKK+KrPAZITum)ss!Ia#UL[lgqu?<&
-N,rTLPdc]YI+e>qn?A-r?!khMs66J;A6s`Jrr2p%l`,nQ?(CB_ru1aRT6O[K_Y4$0rn+)s?!b\J
-s8C?>I:6NanbrIlk,3i??DR,jrs/;5So@qMh#%!K#P"s\DHgH&r;Q^#o!Oiu>Bf6/rs\eJU3U-H
-@qfLdB8?0Xs"O5]RWMk;?!UZLEJ1:2jQkXVg"Fosl1a`6kMtCKbe^K;DeN`p@V0q-C1_'eA[_@0
-rt=e,P]:;G?[(i9nZ\'oAn#/3nbN1jpr8VDAn5:ol)=W4~>
-o`#6qhl337R[Kr<rqcX1rOd/&%1ERN(Jp@-cJe6cqt/mhBabIK%Kd.JT_RpS-N;o=Q%@Zds7F@;
-TpVIXag?_[g%k[;`jhY!JBmohl,BilL6Ca!rr32g_m>PYW:0`c)Z%jrV2^#FpAb0lh8?4MJ'@Ze
-rRercObC(2rVm)a`3#/RY4;Mk#PZKWT883VqtpBun\qu/Lk"4Xrr32na1@^nNTU6?%/\PiV2p+[
-Ng,rtV=jcd0_il(UQ'_NI<pEsOK-@^n)i]kj5ASXp[RS4j5&80_69B$S!f\.OI;f4R@07s^A%L(
-'(<]HTp_1&OmE&;_6fo(P_c.*q>U`qcFKa=Q].'kW;hA~>
-o`#6sm&bA@AnZ4XqYL4/o^_[uY,e@pZGkP^oAlm+n,)qIb.c]qnc&._lHdfNmJeL0bFE$\j8T)R
-d>r?]DM3^N?+fV)s6HVBB3Sj$rVkNCIUccGm/I"iro']*?X'c,rr3o/\XRSB?/#2Us8'd/F'N>5
-r;ZQ,R<N(I[.aM!#Q<)DHsU*ip&=srn["Qp>^,?0qu6oeV28knEo[/urs%npP@RmUli-nnp:Zu8
->$@)HDJ!EsdJj+E(\4npDI@4VWi`_GcJS-cftXqsXe:!`qu6U*rr)WambP(/EFrcg@#Aq&AclRU
-U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g(a[AR]oKW;hA~>
-o`#6sm&bDAAnZ7YqYL4/o\[]`MhmXjZGkP^oAlp-n,)qIb-/"Z^])(P\u!F@mJeL0bFN*]j8T)R
-d?&E^DM3aO?+fV)s6HYCB3Sm%rVkNDIUccHm/I"iro'`+?X0i-rr3o/\sm\C?J>;Vs8'd/F'N>5
-r;ZQ,R<N(J[.aM!#Q<)EHsU-jp&=srn[+Wq>^5E1qu6oeVMStoF6!9!rs%npP@RmUli-nnp:Zu8
->$@)HDJ!EtdJj+E(\4qqDI@7WWi`_GcJS-cftXqsXe:$aqu6U*rr)WambP+1EFrcg@#Aq&AclRV
-U\FWb'(</mEFrZbHKtP#Y`Ed9@UPDiq>U`q`g1g\AR]rLW;hA~>
-o`#6sm'rdWR@Bk\qYL4.oOf9T$48nBZGkP^oBO;snb`.Kb#AfZr=/o=%$LAPs!@Ql]oS!0rr;cB
-[%`t\XKIS0^@)"#lbg&sLk4C\rnbDhP_bsurr36&j27pYJ%5.Mru1OP]V((0gACpMqU30RLP"@[
-s7jjNUlgAEpAY'srRnubNe"q<rr35na1@[mNop?<rs.l(Z'pW1j8T&X#4BF=Q%>Fjrr3H$bIsO&
-H'jtfR?j2mrr)j5o#.u.N.\"-XgZ'khsgC!eBZ.V^S]QYrr3`4rV6$Qh7C%fR@&tgR[ok6R?iuB
-p\On&n&Mu4R?N>dlMpCj[%WnPLnsS:rs8DF\YPX[Ng&_+s*t~>
-oD]-ke:VIHBQ8U'qu$I:rTWITVkg?,e)^&okeDar]C5b!rThG=gZ\2"o^'uIp$Mc*p:Z`#M<b-@
-rS<QWAnZ$h=G#B*s8V5ZK4J5,jSo&"Q[*(NPOSSO#Q<&EH<ab,q>UC4n$&$i?#\g&s8V`&S8)8O
-jo5;PZ]K6:A%;=5rs/A=T64CFg%t^J#4&=M@pFuZqYpcaU5*JnGNf#*#3i+C@9ou)rr3GsYa/m*
-FiV=FB4bkDq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)SS`q>Ufm^R]IY@olp:Ir>6t!b[5Xqu7?/
-k-U(`Amef#m/QU[O)\c@@$C-Vrs8D=Q$-bOA9[::s*t~>
-oD]-ke:_OIBQA^*qu$I:rSk;MPaSMbe)^&okeMjt]C5b!rThG+Y.;<a_Rl\Wp$Mc*p:Z`#MX(6A
-rS<TXAnZ$h=G#B*s8V5[K4J5,jSo&"R!E1OPjn\P#Q<&FH<ae-q>UC4n$/*j?#em's8V`&S8)8P
-jo5;PZ]K6:A%;=5rs/A>T64CGg%t^J#4&=M@pFuZqYpcaUPESoGj,,+#3i+C@:$&*rr3GsZ'K!,
-G/qFHB4bnEq#14/nZ\'nA9QD\jQZ+*qu6<(TS@c=F)\Yaq>Ufm^R]IY@ols;J8Y?u!b[8Yqu7?/
-k-^.aAmef$m/QU[O)\c@@$C-Vrs8D>Q$-bOA9d@;s*t~>
-oD]-ke>&FuR\?e"qu$I3rNm"@+BkGPe)^&omF&)'_XIL(rThEe$k<1G!t>ZQp$Mc*p<0t'Rd0qQ
-rS=fSR@Bb/I$*7]s8V6#Xd+TsjSo&*\tt[NV==Ka#Q<;kVM]lSq>UC4n&Dl+LPb$is8V`6]pj_8
-jo5;P`3c8%M88ocrs/AH^S?[:g%t^J#4'78Q%PUnqYpca]W[fdP3DlE#3j.3P(C"1rr3Gs`jqIi
-M9!H.R@0DFq#14/n\DN(Oc\#NjQZ+*qu6<6^TXQ5Tps$rq>Ufmcb?0BP_4CfTUu.N!g]SOqu7?/
-kKU<'R?2ogm/QUl[%WnPLnsS:rs8DF\>5O[PEtI3s*t~>
-oD]3skbrH1ASZOGVsOE^ruh3s_Psrbh<an5ikpgsNPF3?rr<#qkeY$ekje<3d)>MBs!@0?M.*4L
-s8W)ZQ?m4V@TQdJnG`Idd\;/!>_MAAq9"eAAS-kirr35u`hIN\CuG9krs%_dLh'b>l2L\om]Vgb
->`7qJs73CMEFWXdp\t1)oYR8@?>SU"s8W)WVh8D`V"+<]#3hh8Cgq>Hrr36&goH!5?c2X;rsn@p
-N+6(Lk2;MDBOu/=rr2p%nZ@^h@Vk9*rri>h\rUh0Acl_$li-e]')U1eNc&E6<-H<EEFrfrAoc)n
-r;RH,bc6,*A6N-Ao)J6aO)\c@@$C-VrsAJ=OEG/JA9?`.WW.J~>
-oD]3skbrK2ASZOHW9jN_ruh3o[%t+Oh<an5il$q!Nka<@rr<#qkeXC'\\H"nVRQ-`s!@0?M.3:M
-s8W)ZQ[3=W@TQdJnG`Idd\D5">_VGBq9"hBAS6tkrr35u`hRT]D;bBlrs%_dLh'e@l2L\om]Vgb
->`A"Ks73CNEFW[fp\t1)oYR8@?>\[#s8W)WW.SMbV"+<]#3hk9CgqAIrr36&goQ'6?c2X;rsn@p
-N+6(Lk2;MDBOu2>rr2p%nZIdi@Vt?+rri>h\rUh0Acl_$li-e]')U4fNc&E6<HlKGEFrfrAol/o
-r;RH,c)Z;,A6N0Bo)J6aO)\c@@$C-VrsAJ=O`b8KA9Hf/WW.J~>
-oD]3skd-eER%:(W_XRR(ruh3V>_of0h<an5l.*2,SA3eNrr<#qkeTIl%1WjW$tf(ts!@0SZ%oLO
-s8W)ZZDO(YP_"%onG`IdftjYOKU:s'q9cUFR$496rr35udD;Q7LuA72rs%`,Ya'p*l2L\om`)`%
-Jt20,s73t0TTtVPp\t1)oZk7FMMU6js8W)Y`3#2SY4;Ag#3i_%SWf6#rr36&hoMjZK#m]crsnA4
-Z]p$0k2<83R[9K&rr2p%n\;?&PEP/,rri>ja0_K<R0/nXmf*+`')US3Z_!MAH&BY@TUD4:R%Dn-
-r;RH,fZ0t[Q\^!uo)J6r[%WnPLnsS:rsAJF[A0.XQ_!.8WW.J~>
-o)Bg*dtqgLAnlF@S]^I$s82'2fB2Z"kL6u'D0r;*jnJcQrsJYc_8"[ena+Z@na6>[lE,>?]Cl1'
--L%4TCLpdPK&6D)s7jL(H!t'Mn,N:<N,WB>GO5A0rpIXpE+4(Trr36&gSB=->`J.Mru1+#LLXkt
-nc/X]]7k-6BpJ>js8M,mP\afRkPkJdrR%Bf?<t/8qYqf)RXT$_DT;YTs8(!>H=1:<qu?]qiMM68
->cdMc]Qe%$C6\Mmrs/(sK5P7<\,H:*55jQB]74L*AnZ")S^HX!rqc!<cF9']AR88;ZerB<A7]Cg
-DMZI5s8W)mf!pl_ARAAEfD5I:Y`Ed9@UPDiq>Us#c&-IPB4u1McIg^bb5JLCJ,~>
-o)Bg*du%mMAnlFAT$$R%s82'2fB2Z"kL@&)DLAJ,jnJcQrsJYc_6'iM^UpANna6>[lE,>@]Cl1'
--L%7UCLpdPK&6D)s7jL(H!t'Nn,N:<NGrK?GjPJ1rpIXpE+4(Trr36&gSB=->`S4Nru1+#LLXkt
-nc/X]]7k-6C6nMls8M,mP\afRkPkJdrR%Eg?=(59qYqf)Rso-`DT;YTs8(!>H=1==qu?]qiMV<9
-?**Vd]Qn+%C6\Mmrs/(sK5P7<\,H:*55jQB]7=R+AnZ")T$lg#rqc!<cFB-^AR88;ZerB=A7]Cg
-DMZI5s8W)mf!pl_ARAAFfD5I:Y`Ed9@UPDiq>Us#c&6OQB4u1NcIgacbPeUDJ,~>
-o)Bg*e"E%mR%0kP^=i/Xs82'2fB2Z"mGQ<uP`W&jjnJcQrsJYc_*8>;%LihXna6>[lGocU_=dg-
--L%t?SX5:\Ol$!8s7jpTV36P3n,N:<Z_*YOSF$:Urp\=LT9#/urr36&hSQ:UJtDB/ru1+@YEb!S
-nc/X]`NGf"R'-)]s8M92\=J\DkPkJdrReucNe"q<qYqf)[],gaR*bg3s8(?dViZ_hqu?]qj2A$\
-J@+n:_5*KeR^)Yers/)/XIbfI`r5l955jcd_Q'&lR@9\C^#&/Trql3IgsER+R#ZK:\)4upQC+)0
-T<HoFs8W)niR#$+R#ZK?fD5I:_6fo(P_c.*q>Us#d^#L4R@BhYgZ%2BgAS2SJ,~>
-o)Ba/m(IUQ@qB=nJ![1Jce7C<f@J6]Vg;umQbhDFr;-F"qrY`0g$%bO`:<9q#6*J_F)'D)rr4>5
-W.f+u<a*6,rr<#i^n5aYBXIF3ro&]MAnPt[p&*jhVh8bsIHgb2-2YoZH='sZo)Jagd@G\sD6rp8
-s7k,rBP(q$_Ya,_]:+%ZAprqCrs/;6Soe1Bg%tRFEU03?BP2(>lM^"mYDdF1DqY-is8CB@HsL(&
-p\NU&D.[I&_>XE6oYc)fAncbIrVui^c'`OhJ7iA'B4u::SZ]T?_S<LQLiHp0:fES5o@f+9@:a(g
-H'PYSbKe,8P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]JnS_-BPrBkWhXj:p9+FG~>
-o)Ba/m(IXR@qB=nJ![4Ld+[R>f[e?_W-W)oR).MGr;-F"qrY_sXgu'C\+/nd#6*J`F)0J*rr4>5
-W.f+u<a*6,rr<#i^n5aYBXIF3ro&`NAnQ"\p&*jiVh8bsId-k3-2YoZH='sZo)Jagd@PbtDR9$9
-s7k,sBP(q%_Ya,_]UF.[Aq'"Drs/;6Soe1Cg%tRFEU06@BP2(?lM^"mYDdF1E7t6js8CBAHsL+'
-p\NU&DJ!R'_YsN7oYl2hAnceKrVui^cC/akJS/J(B4u::T!,fC_nWURLiHp0:fES5o@f.:@:a(g
-H'Y_Tbg4;:P]gVF;H'1Mrr;MmO)\c@@$C-Vrsnq]K4nh.BPrBkWhXj:p9+FG~>
-o)Ba/m(f'QPaIr5Wk-3th;mk`iSiSA`MSQHT>B7Nr;-F"qrY^Z$k3XSAb#3g#6*T(U6+()rr4>5
-]<.ZgJ9Sfurr<#ic+g$<OM1;dro'oKR$jP^p\a=.`N>\rT'?7S-2Z3-VN6;8o)JagfY4>OR)&Cp
-s7k-ER[BS?dJNb#d_)KIQ(I7>rs/;D^8$O7g%tRFEU0s,R[KYMmeuV/ag.P'QJDK>s8CWfVi6/O
-p\NUASXGq?dJa+FoZ="uR%()6rVuicgq/okT9bb0R@BkN^<+gRf@8*^Yb78=GB9;0o@fq'P*_T.
-VRXe#gYLQ.\"oCPHul1Jrr;N)[%WnPLnsS:rsnq]W0s!?R\$Rn`knUap9+FG~>
-nc'R)iM^Kt?t<kbFFfLGWNrn2QuunCBp6-WlhUPTrs8Ma_8"[bf>[7Ks(;9#lH6&KFN!>@s8VZ#
-MJQNsK&6D(o^(GHP&OuPU>PtMl(Ds(AT*="XcddEAS,Ll[+3%=oXpK)>?o)?s8Vr8NH&QBIE]p?
-q;R?H@V9bCWMY2mBP(geDm\'3d-e,uA6Na,rqcY7o"B-RA8?UbXdaBWB4YXiRa]EmoY-W)=^g.b
-rp-Y+@qKV2^>dMmfnj<LAp9TQaMOii?&[14CgCFYAS>n&J;9&@Km[`H>uXU'PgK""m_s9V?".A\
-G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXB3\hR@qB=iA7:epY5a"~>
-nc'R)iM^Kt?t<kbFFfLGWj9"4R<E(FC6Q6XlhUPTrs8Ma_6'iJX0hBcs(;9#lH6)LFN!>@s8VZ$
-MelWtK&6D(o^(JIP&OuPU>PtMl(Ds(AT*@$Y**pHAS,Ll[+<.@oXpK)>?o)?s8Vr8NH&QBIEg!A
-q;RBJ@V9bDWMb8oBkCpfDm\*5d-e0!A6Nd-rqcY7o"B0SA8?UcY+0QZB4YXiS(#QpoY-W)=^p4c
-rp-\,@qKV2^>dMmfnsENAp9WRaMXrk?B!:5CgCFYAS>n&J;9&@Km[`H>uXX(Q-f+#m_s<W?".A\
-G(l6RSs"Y@@Tu]-MUV7us7*1@@piSIP4AAJ%fYUXBO"qS@qB=iA7:epY5a"~>
-nc'R)iNJ<#OHu<*UT:f<`lu]J];(@6JXa7"lhUPTrs8Ma_*8>;$r-6\s(;9'maoFRT$Qg's8VZ-
-Z(6brOl$!7p@74k\"B%Y\E<ejl*-V?R%LS"agRq4QC+&1a5PS)oZOe8LjmD=s8VrAZ_<bSVqKhH
-q;S9;PF8/P`l+mNQ'[l*S]B^>h<r7hQ\C.PrqcX&o#%)_QCY"hah=C>rg7/a\DQ#goZXk7Kn/"X
-rp.%bQ'n5Fd-9EIfqXaoRAILAf[[p/JXOolOc#3bR$sS@Wir\4Y,IqVMgf_kSC$j*m_tEKN0BX"
-Uoq8B^:()5P_j[*Q.,F+s7*h'Q&poVU[e0[%fYUjOc,9aQ'[r1Q&;L1Y5a"~>
-nc'L+p",mS?!CTA?t!MS@pr\J=&s:,]$fg9rUp0qqrY`/eBP_pnc)Gai3TGCAR/\cG-UrEpW.Sa
-:gh?5rqO73TQadJ>$Z,lPPXprG@4QW>$G08OFL_B=^#BOBs$TcB3S;>h#%-Oq9*kc=]o$FBP6f&
-^2mU`r`Tq;CS5cU=]np>C2'g1M.KgeFQ`K"55O#m@p3&?>$>'WQ=jB(=^c&ZNT?L@>>]7urr;`B
-JRDVb>\S1mVWGI1?<^]DBP:jZBq*B3fqN.d>?bE@rEq6b?!C?/;-%Y9dd[58qr>,4?<^T=?X[DR
-@UNJD<)HhTbjYN1s7)^m>$"^$O7E#F"nKol?WgM1=Thf*;NL@Ns*t~>
-nc'L+p",pU?!CTA?t!MS@pr\J=''C.]$fg9rUp0qqrY_rWM?N]nc)GaiO#VEAR/\dGI%,GpW7\c
-:gqE6rqO:5TQadJ>$Z,mPPXprG[OZX>$G08OFLbC=^#BOBs$TcB3S;?h#%-Oq9*nd=]o$FBP?l'
-^2mXar`Tq;CnPoW=]np>C2'g1MIfpfFm&T#55O#nA6N/@>$G-YQ=sH)=^c&[NoZXB>>];!rr;`B
-Jmhed>\S4oVrbR3?<^]DBP:m[C7EK4fqN1e>?bE@rEq6b?!C?/;HIk<dd[58qr>,5?X-c??X[DR
-@UNJD<)HhUbjYN1s7)an>$"^$OR`,G"nKol?WpS2=Thf*;NUFOs*t~>
-nc'L+p"-."K85AFOHG`kQ'.)ZH$+e2]$fg9rUp0qqrY^Z$k+u[nc*5"kKV#QQ].!!UW332pW]Ol
-GC.C"rqOsb^nm-KLl@n"ZMO4<QAC6NLk^D*R$!;]L51hRO1shcQA'R/h#%-Oq9YalL4tJJP)Sku
-^lsS.Lkp_3Jte9^L5(JEPE3H<Y*4EZMWag855O$,MhHkAL4OW0S;i;YL5_=YW8t@QKQVt/rr;`B
-S;W,XMjBou]&gYfKnbMJR@&t_J>(6Pfr9aYKo(eMrK&XlN/3%2F*3/;dd[58qr>2JJqSo;O-,Wj
-PE:]UHZF=pbjYN1s7*LXJ9uQ_TCM^V"nKp)Jpr4KJHUIKF.`!*s*t~>
-nGa:'o@UL#@Tc`5=&r:!<*O-jVSC^HpAOR^#5dQ!\[\s2nc&ag`,8sbrDsP4R.UFUgM'bkOQ-0;
-mYPO[qc>FQG45Cl\:.[a='g0Qa1$"i='KBoY1hojD.[F1jo5;[qr!`H='&mRNP4]TiO!b,<tf%s
-]Zd<l='&U?LT]@gI;<G.R-aYK+TCiPO^M6l>Ap1P`IV;r=(lrVd,:%)An[7ks8W&_]Qa?V)J"5b
-dI?,&I:$&S='K[-]%6?Io@LF+AQW&8r`9J.<)cdtAq$SmhXpdGrtP7f_j,4H='&F(=&r:!<F0sM
-cL(T0rrVc"K`65uJ$AM=rrr>daJ+0"rFQ.II^&CGs*t~>
-nG`^lo@UL#@p8k5$s$>+<Ej6lVSC^HpAOR^#5dQ!Vim_=nc&ag`,B'erE'V6R.UFUgM0knOQ-0;
-mYPR]qcGLSGOPLm\:.^c=C6BTa1$"j=BoTrYM/#lDJ*X5jo5;[qr!`I=BK*VNP4]TiO!e-=;,2!
-]Zd<m=BJgCLTfFhIV`Y2R-aYK+TCiPO^V?o>]?@R`IV>t=D</Yd,:(*B5*Ins8W&_]QjEX)J+;d
-dI?,&IUH8V=Boj/]%6?Io@LF+Am&5:r`9J.<)lk!B7HbohXpdGrtP7f_j,7J='&F(=&r:"<F:'P
-cL(T0rrVc"K`65uJ$AM=rrr>daJ+3$rFZ4JJ$ALHs*t~>
-nG`[ko@UL4J,Xa'H[9mXFEi=sW5$pJpAOR^#5dQ!57013nc&agc]s*,rH8`sWV$5fgQ-Q%S)X>F
-m\bqiqfXW:O73&0\rV,[G']"Ia1@.PG'JS&ZJ+?3LOO]6jo5;[qr"5uG'87gR(r"aiO4XCFq]7c
-]ZdR7G'8+]Pd9$#RY6-?V!RpW:&aV(S:#L'G_;d/`KY^mG(5INd,:gXIXdpSs8W&_^5[>[G(,FI
-eF;G+NdGqjG'J\/]%6?Io@LF7IsH<cH@(!bGBItMIZ12@hXpdGrtP7f_juO.G^4U^H[9jVFaAnF
-cL(T0rrVc+Q2ZR@Nk"ZTrrr>daJY#JrI+j!Nk"Y_s*t~>
-n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!ZG#VprrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e
-YeS]Op\t3lp>sQ-SrS-pGmK4fX16=.meZq]rs/Q"m+&kSOb<RW#)SnWa5?IdrVlroim%JA!mTa"
-p\tBnn(c("rO;sCb2W3!s*t~>
-n,EUkpZ'?$Q[esZ#_\MH]Zo="q#9a^"oIH!VmYm]rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&K4e
-YeS]Op\t3lp>sQ-Sr\3rGmSeROK5n6h<t.=rVm-%qWubIYE=M:GmAYPS[6Aoo)8Oe!r1d"rl"r`
-iqW9J"T.ZCb.dha"22k:poaXI~>
-n,EUkpZ'?$SW*N'#`tOY]Zo="q#9a^"oIH!@u'F@rrW&S\bi?:[++aJroh(qZdSLGs6n+6qPbL=
-b4#B*j2\I*X0fq*n)M6dWirtTh!j[V]"#B!nG`G6rpe@BWiWSBcJnTtpYiumWN<VTkOIBBXfAS8
-akZCObIG'sg%G.?)>idI[]?F4_:e8@bH\(L[`-kamF/_X^=MrUruh-t`36/A[DLGZqY0$k[&KLm
-YeS]Op\t3lp>sQ-U6^Z7L^Ap$R&da>h<t.=rVm-%qWubIYF1IML^/d#TsMeso)8Oe!r1d"rl"r`
-iqW9J"T.ZCb.dha"22k:poaXI~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-mJd^oo&\KIa2Q$<cIh1Do_\XSrri5`f&$)irrW/kkkj?Mk4/?Ks7kj<kOSTOs8)-DqViOVmJ?k^
-qsik0j66%1rqYpAj5oUtqYp?\lKRX*qu-O?rU]75j65q(qu6WpqX3J)j6?47rqGd?j5oUtqYp?[
-l07R,rV-=/rUf@7j6#e*rql3Ij5fIoq#:0]lfmd.r;Q^2rqc'EioB7kpAFphqsin.gY_/]p\k$i
-"o\)WgsX=C`<XK0fAPrcqu6Ek#6";aimuAprl#)_d+d^Qqu6Nn!r_obrp^'\q#0pd$i^"om-<j"
-lKn'9rN?0N~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-li.%cq=O[V"7l-]roa:`r:fsaJcF:#!r`#ppAY6oqtK[[nH8@Tq>Kma"9&&fo)A.]o(Mt[LAuc~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-JcC<$JcFs6J,~>
-%%EndData
-showpage
-%%Trailer
-end
-%%EOF
diff --git a/docs/draknet_advanced_doc.txt b/docs/draknet_advanced_doc.txt
deleted file mode 100644
index a0c0c63e0..000000000
--- a/docs/draknet_advanced_doc.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-This document details the entry points you can call without the DrakX graohical
-toolkit. First, the general variables you will encounter further. If you don't
-know wht a variable is, look here. Any additional locally variables are
-commented 'in place'
-
-------------------------------
-Special types (in upper cases)
-------------------------------
- DB_FILE : file storing the ISDN ISP database. see share/isdndb.txt : file of lines in 'Unlisted - edit manually' or /^(.*)\|(.*)\|(.*)=>([0-9]*)=>(.*)=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})=>(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})$/ where $1=Land $2=City $3=ISP_name $4=phone_number $5=hostname $6=dns1 $7=dns2
-
----------------------------------------------------------------------------------------
-Summary of common variables used (local variables are described in the function itself)
----------------------------------------------------------------------------------------
-notation : keys : description : type : format (regexp or enumeration. `...' means it's not exhaustive
- $prefix : prefix path (empty in post-install) : string : path
- $isLaptop : flag for laptop : boolean or int : guess
- $isdn : hash table containing isdn infos
-  $isdn->{login} : cnx login : string
-  $isdn->{passwd} : cnx passwd : string
-  $isdn->{phone_in} : user phone : /^[0-9]*$/
-  $isdn->{phone_out} : ISP phone : /^[0-9]*$/
-  $isdn->{dialing_mode} : dialing mode : "auto" or "manual"
-  $isdn->{driver} : driver used for the card : "hisax" or "b1pci" or ...
-  $isdn->{type} : type of card, used for the driver, see netconnect_consts : integer : /^[1-22]|[24-37]$/
-  $isdn->{irq} : irq of the ISA card : integer |
-  $isdn->{mem} : mem of the ISA card : string  |
-  $isdn->{io} : io of the ISA card : string    | see netconnect_consts for examples.
-  $isdn->{io0} : io0 of the ISA card : string  |
-  $isdn->{io1} : i01 of the ISA card : string  |
-  $isdn->{idl} : amount of time after the cnx times out in secs : int
-  $isdn->{user_name} : not used anymore. Not explicit. It represented the name of the connexion.
-  $isdn->{card_type} : card type : string : "isa" or "pci" or "pcmcia"
-  $isdn->{protocol} : cnx protocol : int : 1|2|3 : 1 for old german specific (not used anymore), 2 for europe, 3 for rest of the world
-  $isdn->{id} : card id. Associated with vendor, identify strictly the card. see pcitable : integer
-  $isdn->{description} : card description from pcitable : string
-  $isdn->{vendor} : card vendor : integer
-  $isdn->{passwd2} : passwd verification : string
- $modem : hash table containing modem infos
-  $modem->{device} : device of the modem : string : /ttyS[0-9]/
- $adsl : hash table containing modem infos
-  $adsl->{login} : cnx login : string
-  $adsl->{passwd} : cnx passwd : string
-  $adsl->{atboot} : 
- $netc : hash table containing system-wide networking infos (maybe not true, correct this) : 
-  $netc->{NET_DEVICE}
-  $netc->{dnsServer2}
-  $netc->{dnsServer3}
-  $netc->{DOMAINNAME2}
-  $netc->{NET_INTERFACE} is set to "ppp0"
- $in : interactive object
-
-------------
-Entry points
-------------
-
-isdn_write_config_backend : write isdn info, only for ippp0 -> ask_connect_now
-input :
- $prefix
- $isdn
-$isdn input:
- $isdn->{login} $isdn->{passwd} $isdn->{phone_in} $isdn->{phone_out} $isdn->{dialing_mode}
- $isdn->{driver} $isdn->{type} $isdn->{irq} $isdn->{mem} $isdn->{io} $isdn->{io0} $isdn->{io1}
-
-write_secret_backend : write login and passwd into /etc/ppp/{chap, pap}-secrets. Replace old passwd only if same login
-input :
- $a : login : string : /^.*$/
- $b : passwd : string : /^.*$/
-
-connect_backend : launch the cnx script
-input : $prefix
-
-connect_backend : launch the cnx script
-input : $prefix
-
-read_providers_backend : build the tree of isdn ISP
-input :
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-output : the list of ISP : array of strings : array of /^(.*)\|(.*)\|(.*)$/ where $1=Land $2=City $3=ISP_name
-
-get_info_isdn_backend : fills the infos from the line of the tree returned into $isdn and $netc
-input :
- $isdn
- $netc
- $name : the line choosen in the tree of ISP : string : /^(.*)\|(.*)\|(.*)$/ with $1=Land $2=City $3=ISP_name
- $file : 1st location of the file : ISDN_DB_FILE
- $file2 : 2nd location of the file : ISDN_DB_FILE
-$isdn ouput
- $isdn->{user_name}, $isdn->{phone_out}, $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3},
-$netc output
- $netc->{DOMAINNAME2}, $netc->{dnsServer2}, $netc->{dnsServer3}
-
-isdn_detect_backend : detects isdn pci card and fills the infos in $isdn : only detects one card
-input
- $isdn
-$isdn output:
- $isdn->{description} $isdn->{vendor} $isdn->{id} $isdn->{driver} $isdn->{card_type} $isdn->{type}
-
-isdn_get_list : return isdn cards descriptions list. This function is not use internally.
-output : descriptions : list of strings
-
-isdn_get_info : return isdn card infos. This function is not use internally.
-input : the description of the card (see isdn_get_list)
-output : a reference on the decription of the card. : ref on a hash(description,type,irq,mem,io,io0,io1card,)
-
-conf_network_card_backend : configure the network cards and return the list of them, or configure one specified interface : WARNING, you have to setup the ethernet cards, by calling setup_thiskind($in, 'net', !$::expert, 1) or setup_thiskind_backend before calling this function. Basically, you call this function in 2 times.
-input
- $prefix
- $netc
- $intf
- $type : type of interface, must be given if $interface is : string : "static" or "dhcp"
- $interface : facultative, if given, set this interface and return it in a proper form. If not, return @all_cards
- $ipadr : facultative, ip address of the interface : string
- $netadr : facultative, netaddress of the interface : string
-when $interface is given, informations are written in $intf and $netc. If not, @all_cards is returned.
-$intf output: $device is the result of
- $intf->{$device}->{DEVICE} : which device is concerned : $device is the result of $interface =~ /(eth[0-9]+)/; my $device = $1;;
- $intf->{$device}->{BOOTPROTO} : $type
- $intf->{$device}->{NETMASK} : '255.255.255.0'
- $intf->{$device}->{NETWORK} : $netadr
- $intf->{$device}->{ONBOOT} : "yes"
-$netc output:
- $netc->{nb_cards} : nb of ethernet cards
- $netc->{NET_DEVICE} : this is used to indicate that this eth card is used to connect to internet : $device
-output:
- $all_cards : a list of a list ( (eth1, module1), ... , (ethn, modulen)). Pass the ethx as $interface in further call.
- $device : only returned in case $interface was given it's $interface, but filtered by /eth[0-9+]/ : string : /eth[0-9+]/
-
-adsl_conf_backend : write adsl configuration
-input :
- $prefix
- $adsl
- $netc
- $adsl_type : type of cnx : string : "pptp" or "pppoe"
-$adsl input:
- $adsl->{login}, $adsl->{passwd}, $adsl->{atboot}
-$netc input:
- $netc->{NET_DEVICE}
- $netc->{dnsServer2}
- $netc->{dnsServer3}
- $netc->{DOMAINNAME2}
-$netc output:
- $netc->{NET_INTERFACE} is set to "ppp0"
-
-modem_detect_backend : detects modem on serial ports and fills the infos in $modem : detects only one card
-input
- $modem
- $mouse : facultative, hash containing device to exclude not to test mouse port : ( device => /ttyS[0-9]/ )
-output:
- $modem->{device} : device where the modem were detected
-
-get_net_device : return the device choosen for the net cnx
-no input
-output : name of the internet device.
-
-read_net_conf : read the information stored in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
-input:
- $prefix
- $netcnx
- $netc
-
-set_net_conf : set the information from netcnx in $prefix/etc/sysconfig/draknet and $prefix/etc/sysconfig/draknet.`type`
- $prefix
- $netcnx
- $netc : useless! REMOVE ME
diff --git a/docs/interactive/ask_from b/docs/interactive/ask_from
deleted file mode 100755
index dad69247e..000000000
--- a/docs/interactive/ask_from
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-
-my $irq=1;
-my $login;
-my $login2="editable";
-my $check;
-my $range=57;
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-$in->ask_from("window title - ask_from",
-	      "message\nexamples of utilisation of ask_from",
-	      [
-	       { label => "enter scalar", val => \$irq },
-	       { label => "combo (type=>combo optionnal)", val => \$login, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], type => 'combo'},
-	       { label => "choose from list editable and sorted", val => \$login2, list => ['Netherlands', 'France', 'Belgium', 'Italy', 'UK'], not_edit => 0, sort => 1},
-	       { label => "check box", val => \$check, type => "bool", text => "text" },
-	       { label => "range", val => \$range, type => 'range', min => 0, max => 100 },
-	      ],
-	      complete => sub { print "complete\n";print "$irq\n$login\n$range\n"; },
-#	      focus_out => sub { print "focus_out\n"},
-#	      changed => sub { print "changed\n"; },
-	     ) or $in->exit(0);
-$in->exit(0);
diff --git a/docs/interactive/ask_from_list b/docs/interactive/ask_from_list
deleted file mode 100755
index 63c0ee996..000000000
--- a/docs/interactive/ask_from_list
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use interactive;
-
-my %l = (
-	 0 => "Welcome To Crackers",
-	 1 => "Poor",
-	 2 => "Low",
-	 3 => "Medium",
-	 4 => "High",
-	 5 => "Paranoid",
-	);
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-my $level = $in->ask_from_list("window title - ask_from_list",
-			       "radio button\nexamples of utilisation of ask_from_list",
-			       [ values %l ], $l{2}
-			      ) or $in->exit(0);
-
-print "$level\n";
-$in->exit(0);
-
diff --git a/docs/interactive/ask_from_listf b/docs/interactive/ask_from_listf
deleted file mode 100755
index 077540b49..000000000
--- a/docs/interactive/ask_from_listf
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-use Data::Dumper;
-
-my $in = 'interactive'->vnew(undef, 'default');
-
-my @m=(
-       { description => "dhcpcd",
-	 c => 1},
-       { description => "dhcpxd",
-	 c => 3},
-       { description => "dhcp-client",
-	 c => 4},
-      );
-my $f = $in->ask_from_listf(_("ask_from_listf"),
-				_("Which dhcp client do you want to use?\nDefault is dhcpcd"),
-				sub { $_[0]{description} },
-				\@m );
-
-print Data::Dumper->Dump([$f],['f']) . "\n";
-
-$in->exit(0);
-
diff --git a/docs/interactive/ask_from_treelist b/docs/interactive/ask_from_treelist
deleted file mode 100755
index ade7141d4..000000000
--- a/docs/interactive/ask_from_treelist
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use common;
-use interactive;
-
-my $in = 'interactive'->vnew(undef, 'default');
-my $foo = $in->ask_from_treelist("window title - ask_from_treelist",
-		       "message\nexamples of utilisation of ask_from_treelist",
-		       '|',
-		       ['Custom',
-			'Other|Unlisted',
-			'Matrox|Millennium II=>Matrox Millennium II',
-			'Matrox|Millennium G200=>Matrox Millennium G200',
-			'Matrox|Millennium G400=>Matrox Millennium G400',
-			'Matrox|Millennium G450=>Matrox Millennium G450',
-			'Matrox|Millennium G550=>Matrox Millennium G550',
-			'Sun|FFB 67MHz Creator=>Sun FFB 67MHz Creator',
-			'Sun|FFB 67MHz Creator 3D=>Sun FFB 67MHz Creator 3D',
-			'Sun|FFB 75MHz Creator 3D=>Sun FFB 75MHz Creator 3D',
-		       ],
-				 'Custom'
-		      ) or $in->exit(0);
-print "$foo\n";
-$in->exit(0);
diff --git a/docs/interactive/wait_message b/docs/interactive/wait_message
deleted file mode 100755
index 0caec4471..000000000
--- a/docs/interactive/wait_message
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/usr/bin/perl
-# Yves Duret <yduret at mandrakesoft.com>
-# license: GPL
-
-use lib qw(/usr/lib/libDrakX);
-use interactive;
-
-my $in = 'interactive'->vnew(undef, 'default');
-my $wait = $in->wait_message('wainting title', _("Moving files to the new partition"));
-sleep(3);
-$wait->set(_("Removing"));
-sleep(3);
-$in->exit(0);
diff --git a/docs/mdk-9.2 b/docs/mdk-9.2
deleted file mode 100644
index 1d5a06494..000000000
--- a/docs/mdk-9.2
+++ /dev/null
@@ -1,129 +0,0 @@
--*- outline -*-
-
-        todo list for mdk9.2
-        (mainly gtk+ oriented for now)
-
-* erratas
-** put them in gi/perl-install/patch/mdk_9.1
-** move mdk9.1 ones from gi/perl-install/patch into gi/perl-install/patch/mdk_9.0
-
-
-* libDrakX
-** document internals through docbook like kernel-2.5.x does
-
-* mcc vs tools communication
-** faster tools embedding in mcc (gc idea)
-   move gui into gui/<sg>.pm so that mcc can just do require on them
-   instead of doing slow fork+perl startup (same idea as fast_cgi,
-   perl_mod and the like)
-** told apps to ask user whether to save their changes or to discard them on cancel (#1437)
-** to let diskdrake fit better when embedded, we should write "formated - mounted" rather than "formated\nmounted"
-** "testing mode" option in options menu so that we pass --testing to our tools ?
-
-* ugtk2 & tools guies:
-** cleanups:
-*** $o->flush() should be sub { $_[0]->window->process_updates(1) }
-    see logdrake::parse_file()'s progress bar as an example
-** saner/cleaner usage of gtk+-2.2 widgets:
-*** use MessageDialog for modal windows (cleaner)
-    especially for wait/error messages so that one uses std gtk+ icons for info/error/warning and the like events
-*** use button boxes everywhere when we have several buttons for saner gui (as per gnome specs/recommendations)
-*** gtk::combo => gtk::optionMenu (as per gtk+-2 doc)
-*** use size::group to let things be smoother in some places (eg: clock.pl from mcc)
-
-* tools
-** all:
-*** provide menu entries for more gui tools (?): for now, only harddrake2 and logdrake have one
-*** explanations of std standalone.pm functions are broken due to common.pm overloading
-*** have a button or a menu to access help (was already part of mdk9.1 specs)
-    only harddrake2, mcc and rpmdrake have one for now
-    policy might be: "most users access tools via the mcc, so let handle help, bug reports and co only in mcc"
-*** rename and provide compatibility links:
-**** adduserdrake  => drakeuseradd
-**** diskdrake     => drakdisk
-**** harddrake     => drakhw
-**** keyboarddrake => drakkeyboard
-**** localedrake   => draklocale
-**** logdrake      => draklog
-**** menudrake     => drakmenu [fredc]
-**** mousedrake    => drakmouse
-**** printerdrake  => drakprinter
-**** userdrake     => drakuser [deush]
-**** XFdrake       => drakx11
-** drakboot:
-*** should prevent the user to insert a space in a kernel label (#2826)
-*** fix "Display theme under console" setting from current theme config file (#2662)
-** drakconnect
-*** does not show up zeroconf as a valid mode in "configuring lan" window in embedded mode
-** drakedm: 
-*** restart dm service ?
-** harddrake: 
-*** colorize the internal help
-*** add raw description (or join('|', vendor, descr)) for mass medias (see drakx bug #3???)
-*** use pure gtk+ instead of interactive for "fields description" or alter interactive so that it creates modal windows
-** logdrake:
-*** search field does not get focus when embedded
-*** we may disable the search button when one deselect all explanation files
-** mcc:
-*** make tool names be black or blue (like in rpmdrake & harddrake2 guies) (#2695)
-*** hide non executable programs instead of warning at runtime if program isn't executable
-*** make more program being options rather than depandancies (ie like rpmdrake and drakwizard)
-*** add scrollbars if root window is below 800x600 (#2961)
-*** add scrollbars for too big translated messages (but how to detect it)
-*** move drakedm from hardware to system section
-*** enhance mcc descriptions (#3265)
-** rpmdrake
-*** save mode (sort by group, mdk choice, ...)
-**** sa serait cool que tu sauve la position (aka choix mdk, tri/alpha, par
-     groupe, par taille, ...) et que tu la restaure
-*** m-q accelerator to quit
-*** if package is unselectable, explain why
-*** si conflit, proposer de deselectionner le package en question +tot que de
-    devoir se taper l'arborescence pour le deselectionner (a - que la
-    recherche e perde pas la selection de package en cours)
-*** some windows are still non modal, like:
-    o tout ce qui se rapporte aux dependances "des paquetages
-      supplementaires sont necessaires", ...  tu oublie de passer "{
-      transient => $w->{rwindow} }"
-    o toutes les fenetres grpmi.  faudrait voir si on peut foutre le
-      core de grpmi dans un package pour faire "use grpmi" et seter
-      le nouveau $::main_window pour corriger ca.
-*** we need access to urpmi options like "no gpg signature check"
-*** bug 1
-1) selectionner des packages a installer
-
-2) rpmdrake dit que X doit etres vier
-
-3) rpmdrake le vire
-
-4) rpmdrake passe a l'update/isntall proprement dite
-
-5) rpmdrake failled
-
-rpmdrake re-tentera d'enlever le package X du 1 en cas de reessai
-alors qu'il n'est + la
-
-** scannerdrake/sane-find-scanner
-*** do not detect every usb devices as scanner
-** urpmi
-*** --repair-system: add missing dependancies for currently installed packages
-
-
-* packages
-** main package updates:
-*** rpm-4.2
-*** kernel-2.6 (if availlable and stabilized: not probable) ?
-    at least, keep kernel-2.4.x
-** add new packages:
-*** kernel-mosix
-*** dvb related packages: vcr, vdr, ...
-** icewm/windowmaker/other wm
-*** export BROWSER like gnome/kde (look at /etc/gnome/gnomerc)
-
-* hardware support
-** kernel: update alsa, bttv, dvb & saa7134 drivers for better hardware support (the laters from http://bytesex.org)
-*** add "REGISTER ^dvb/adapter[0-9]+/[^/]+$ PERMISSIONS root.video 0660" to devfsd
-*** update oss audigy driver from pserver:anonymous@cvs.sourceforge.net:/cvsroot/emu10k1 cvs
-** add cx88 sound driver from http://bytesex.org/snapshot
-** isa detection/probing in ldetect ? (#118, #497) => need some old hw in order to test
-   probably not
diff --git a/docs/mdk-vs-redhat b/docs/mdk-vs-redhat
deleted file mode 100644
index 4d0de8223..000000000
--- a/docs/mdk-vs-redhat
+++ /dev/null
@@ -1,43 +0,0 @@
-+ Open Development (at least DrakX)
-+ UDMA66 (HPT366)
-+ gamerz
-+ number of packages
-+ better packages(?)
-+ no automatic handling of ide burners
-+ urpmi/rpmdrake
-+ XFdrake
-+ no newbie install
-+ reiserfs
-+ fat resizing
-+ 3D handling (eg: Voodoo3)
-+ diskdrake (vs diskdruid)
-+ usb storage (?)
-+ KDE2
-+ faces in kdm/gdm
-+ menu
-+ alternatives
-+ /etc/emacs/site-start.d
-+ default config
-+ i18n (bootloader keyboard)
-
-+ More user-friendliness in general:
-	+ you can choose between multiple net devices when more than one are
-	detected
-	+ you are presented with the media descriptions (disks, cdrom's)
-	when you must choose between multiple media, and not only "sda",
-	"hdc", ..
-	+ when installing from a disk partition, you are presented with an
-	extract of the directory contents when you fail to give the
-	correct location, which is very helpful to correct the input
-	instead of simply rebooting to remember where on earth you
-	mirrored the distribution on your disks
-
-+ Automatic mode (Redhat's equivalent is called "kickstart") is not
-  performed according to a file on the floppy but from kernel parameters,
-  which have many pros, among them: (1) we don't need the vfat filesystem
-  for that purpose, and (2) with advanced bootloaders such as grub and
-  lilo you can edit parameters on the fly at boot time.
-
-- no LABEL= in fstab (for auto renumbering of devices)
-- kerberos
-- LDAP
diff --git a/docs/net_object_class.fig b/docs/net_object_class.fig
deleted file mode 100644
index 19f7f5318..000000000
--- a/docs/net_object_class.fig
+++ /dev/null
@@ -1,73 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4050 4162 675 338 4050 4162 4725 4500
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 5700 3112 675 338 5700 3112 6375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 7275 4087 675 338 7275 4087 7950 4425
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4800 1462 975 487 4800 1462 5775 1950
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 2700 3112 675 338 2700 3112 3375 3450
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4875 5887 975 487 4875 5887 5850 6375
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 9450 5062 675 338 9450 5062 10125 5400
-1 1 0 1 0 7 50 0 -1 0.000 1 0.0000 4654 4038 3900 3225 4654 4038 754 813
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4125 1875 3225 2850
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4575 1950 4200 3750
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5250 1950 5475 2775
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 3000 3450 3600 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5925 3450 6675 3900
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 2700 3450 4050 5550
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4125 4500 4575 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5625 3450 5025 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5775 1575 9450 4725
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 7800 4275 9000 4800
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 4800 1950 4800 5400
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 9000 975 9450 4725
-2 2 0 1 0 7 50 0 -1 0.000 0 0 -1 0 0 5
-	 7500 75 10687 75 10687 975 7500 975 7500 75
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 7500 375 5400 1050
-2 1 0 1 0 7 50 0 -1 0.000 0 0 -1 1 0 2
-	0 0 1.00 60.00 120.00
-	 5550 1800 7200 3675
-4 0 0 50 0 0 12 0.0000 4 135 885 4350 1500 Netconnect\001
-4 0 0 50 0 0 12 0.0000 4 135 435 2475 3150 ISDN\001
-4 0 0 50 0 0 12 0.0000 4 135 720 3675 4200 MODEM\001
-4 0 0 50 0 0 12 0.0000 4 135 960 6825 4125 ETHERNET\001
-4 0 0 50 0 0 12 0.0000 4 135 480 5400 3150 ADSL\001
-4 0 0 50 0 0 12 0.0000 4 135 420 4650 5925 Tools\001
-4 0 0 50 0 0 12 0.0000 4 135 660 9150 5100 Network\001
-4 0 0 50 0 0 12 0.0000 4 135 1305 8400 375 Rest of the world\001
-4 0 0 50 0 0 12 0.0000 4 180 2595 7725 600 (draknet, printerdrake, tinyfirewall\001
-4 0 0 50 0 0 12 0.0000 4 180 2310 7725 825 ftp, http, net_monitor, drakgw)\001
-4 0 0 50 0 0 12 0.0000 4 195 2760 3525 6825 Global variables $in, $prefix, $install\001
-4 0 0 50 0 0 12 0.0000 4 180 2340 3525 7050 shared with the module globals\001
diff --git a/docs/object_class.fig b/docs/object_class.fig
deleted file mode 100644
index 44fd3fe89..000000000
--- a/docs/object_class.fig
+++ /dev/null
@@ -1,32 +0,0 @@
-#FIG 3.2
-Landscape
-Center
-Inches
-Letter  
-100.00
-Single
--2
-1200 2
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 1200 2625 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 1125 7575 1650
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 5025 2025 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 2100 4350 3225
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 5025 2025 6075 4125
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 2625 1200 4950 1725
-2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
-	 7575 1125 4950 1725
-4 0 0 100 0 0 12 0.0000 4 180 1755 1800 1050 install_steps_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1440 6900 975 install_steps_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1140 2100 1950 interactive_gtk\001
-4 0 0 100 0 0 12 0.0000 4 180 1275 6900 1950 interactive_stdio\001
-4 0 0 100 0 0 12 0.0000 4 180 1875 4125 1950 install_steps_interactive\001
-4 0 0 100 0 0 12 0.0000 4 135 810 3975 3450 interactive\001
-4 0 0 100 0 0 12 0.0000 4 180 975 5625 4350 install_steps\001
diff --git a/docs/porting-ugtk b/docs/porting-ugtk
deleted file mode 100755
index a72faabb6..000000000
--- a/docs/porting-ugtk
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/usr/bin/perl -pi
-#
-# $Id$
-#
-# This is not an automatic gtk+-1.x to gtk+-2.x port tool,
-# just a tool that ease perl apps' gtk2 port.
-# you'll have to fix all remaining problems, beginning by spotted warnings
-# it'll save you basic conversion work
-#
-# if you used Gtk::Text, a little more work will be needed (look at logdrake gtk2 port)
-# if you used Gtk::CTree, Gtk::CList or worse, Gtk::Tree, you'll need quite a lot of exhausting work :-(
-#
-# usage: porting-ugtk <file>
-#
-# hint: always use strict
-
-# switch to gtk2 :
-s!Gtk:!Gtk2:!g;
-/(use|require) Gtk/ and print STDERR "Warning: if this (bad) app that did not use my_gtk, you'll have a hard time :-)\n         if not, using both Gtk && my_gtk was misdesigned ...\n";
-s!(use|require) Gtk.*!!g; # 
-s!my_gtk!ugtk2!g;
-
-# one should pass the right ":stuff" to "use ugtk2 qw();"
-/ugtk::/ and print STDERR "Warning: you'll have to passe eiter :ask, :create, :helpers or :wrappers to ugtk\n";
-s!ugtk::!!g;
-# if my_gtk wasn't used, this'll be spotted by the lack of "use ugtk2;" anyway
-s!(require|use) ugtk.*!!g;
-
-
-# deprecated :
-/::(CTree|CList|Text[^V])/ and print STDERR "Warning: CTree, CList and Text widgets are deprecated... Good luck :-(\n";
-/gtkcreate_(png|xpm)/ and print STDERR "Warning: new Gtk::Pixmap(gtkcreate_(png|xpm)) should be replaced by gtkcreate_img\n";
-/set_policy/ and print STDERR "Warning: ->set_policy() should be replaced by allow_shrink/allow_grow/set_resizable\n";
-
-# obsoletes methods||functions :
-s!set_usize!set_size_request!g;
-s!gtkset_set_border_width!gtkset_border_width!g;
-s!border_width!set_border_width!g;
-s!-(end|spread|extended|start|single)!'\1'!g;
-s!createScrolledWindow!create_scrolled_window!g;
-# quite a lot less usefull with gtk+2 but who knows... :
-s!set_position\(1\)!set_position('center')!g;
-s!gtkpng!gtkcreate_img!g;
-# hacky but usefull in ->set_pixmap() context; else that'll be spoted at run time :
-s!gtkcreate_png!gtkcreate_img!g;
-# usefull sometimes but not in most cases :
-#s!new GtkVBox!create_vbox!g;
-#s!new GtkHBox!create_hbox!g;
diff --git a/docs/spec-DrakX-8.0.html b/docs/spec-DrakX-8.0.html
deleted file mode 100644
index 3fd545447..000000000
--- a/docs/spec-DrakX-8.0.html
+++ /dev/null
@@ -1,405 +0,0 @@
-<html><head><title>DrakX Specification for Linux-Mandrake 8.0</title></head>
-<body bgcolor="#FFFFFF" link="#0066FF" vlink="#0066FF" alink="#FF0000">
-<table border="0" cellpadding="0" cellspacing="0" width="100%">
-<tr>
-<td bgcolor="#99AAFF"><h2 align="left">DrakX Specification for Linux-Mandrake 8.0</h2></td></tr>
-<tr><td valign="top">
-Current team of Install group is :
-<p>
-<table cellpadding="2" cellspacing="2" border="1" width="30%">
-<tbody>
-<tr valign="Top">
-<td valign="Top">gc
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">damien
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">fpons
-
-</td>
-</tr>
-<tr valign="Top">
-<td valign="Top">pixel
-
-</td>
-</tr>
-</tbody>
-</table>
-<p>
-
-<pre>
-
-  <b>Boot process (stage1)</b>
-
-    Installation begin by booting from CD-ROM or Diskette. From CD-ROM all
-installation method are available (CD, HD, NFS, FTP, HTTP) on options. From
-Diskette according to image selected, only some related method (network or cdrom
-or hd) are available and module managed due to size limitation to 1.44Mb.
-    Options are always available by pressing on F1.
-
-  <b>DrakX process (stage2)</b>
-
-    DrakX installation organized in steps (execution sequence described below).
-Steps listed on left side and help available on bottom right side. most of the
-screen is available for various dialog for interacting with the user. Steps
-execution sequence is automated and described below.
-
-Mouse is probed and if none has been found or if the mouse has not moved, a
-specific mouse configuration is displayed at the begining.
-
-
-Before the graphical steps, there is a detection step. It detects various
-hardware, including modems (from tty0 to tty7), mouse (serial, usb, ps/2) and
-tablets.
-
-    <b>Steps</b>
-
-      <i>Choose Your language</i>: step always displayed. default choice is previous one or
-<font color="#000080"><i>English</i></font>. After choosing a language, a license splash screen translated in the
-chosen language is displayed with <font color="#000080"><i>Accept</i></font> and <font color="#000080"><i>Refuse</i></font> buttons. <font color="#000080"><i>Refuse</i></font> should
-stop installation. <font color="#000080"><i>Accept</i></font> validate language choice which are propagated to all
-DrakX visible widget. Advanced mode allow to select other language available to
-be installed. Advanced mode allow to select language which will be installed on
-system.
-      If step is redone, the license is no more displayed.
-
-      <font color="#000080"><i>Select Install Class</i></font>: step always displayed. default choice is previous one
-or <font color="#000080"><i>Recommended</i></font>. Only one other option available is <font color="#000080"><i>Customized</i></font>. Two buttons
-available are <font color="#000080"><i>Install</i></font> or <font color="#000080"><i>Upgrade</i></font>. Available steps (left side) are changed
-according to installation class selected, where the default is the one of
-<font color="#000080"><i>Recommended</i></font> with <font color="#000080"><i>Install</i></font>.
-
-      <font color="#000080"><i>Hard Drive Detection</i></font>: step always displayed. In recommended mode,
-automatically done. In Customized mode, all modules that manage SCSI/IDE cards
-are loaded automatically and a question asking for other module to load is
-displayed.
-      If clicked later or if to the question to load other module the
-answer is <font color="#000080"><i>Yes</i></font>, a list of module is displayed (or if the question to other
-module to load is. When a module is chosen, two options are available
-<font color="#000080"><i>Autoprobe</i></font> and <font color="#000080"><i>Specify options</i></font>. Autoprobe try to load the module without any
-other user options (default module parameter). Specify options allow user to
-give module parameters individually in a list for all known parameters. At this
-point <font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> are available, Cancel should stop the module installation
-and go to next step. If any error occurs during module installation, a question
-asking to try with other parameter is displayed, the same module is still used.
-
-      <font color="#000080"><i>Setup filesystems</i></font>: step always displayed. display a list of available choice
-accoding to what has been probed. May contains <font color="#000080"><i>Use free space</i></font>, "Use existing
-partition<font color="#000080"><i>, </i></font>Use the window partition for loopback<font color="#000080"><i>, </i></font>Use the free space on the
-Windows partition<font color="#000080"><i>, </i></font>Remove Windows(TM)<font color="#000080"><i>|</i></font>Erase entire disk" (according to disk
-configuration =&gt; only one big fat for the first case only), "Custom disk
-partitioning".
-      If <font color="#000080"><i>Use free space</i></font> mode, auto allocation in available on available disk.
-      If <font color="#000080"><i>Use existing partition</i></font> mode, a list of partition named in Linux
-scheme are displayed with their approximate size in Mb and propose mount point
-to choose in list boxes for each partitions available on hard drive.
-      If <font color="#000080"><i>Use the window partition for loopback</i></font> mode, DrakX use available size
-on the windows partition to create a root file and a swap file which will be
-used in loopback, this means this is a lnx4win installation.
-      If <font color="#000080"><i>Use the free space on the Windows partition</i></font> mode, DrakX will resize
-the windows partition and allocate true linux filesystem (at least / and swap).
-      If <font color="#000080"><i>Remove Windows(TM)</i></font>|<font color="#000080"><i>Erase entire disk</i></font> mode, DrakX clean the
-partition table before auto allocating partition.
-      If <font color="#000080"><i>Custom disk partitioning</i></font> mode, diskdrake is launch. TO BE DEFINED to
-change make diskdrake use only advanced mode.
-Diskdrake show all partition of all non-removable disk graphically. All special
-partition are hidden, only user accessible partition are visible: this remove
-extended partition, whole disk partition on sparc platform. Clicking on a disk
-notebook tab show all his partitions. Clicking on a partition show all actions
-available for this partition (depend if customized or advanced mode) as well as
-information on this partition (depend if customized or advanced mode). Most
-diskdrake operation are done without writing on disk (exception are Resizing
-partitions) and everything is written once on the disk when exiting diskdrake,
-at any time if writing partition table is necessary, there are always a dialog
-box asking the user to confirm the write. If no operation are modifying
-partition table, no dialog is displayed on exit (for example if giving mount
-point to partition). General action are available too:
-        <font color="#000080"><i>Clear All</i></font>: clear all partition of the given disk.
-        <font color="#000080"><i>Auto allocate</i></font>: try to allocate partition in available disk (not the
-seen disk).
-        <font color="#000080"><i>Undo</i></font>: undo last operation.
-        <font color="#000080"><i>Done</i></font>: quit and save changes.
-Other operations are available in advanced mode:
-        <font color="#000080"><i>Rescue partition table</i></font>: try to rescue a lost partition table,
-absolutely no garantee to succeed and may destroy what could be saveable by
-another tools.
-        <font color="#000080"><i>Reload</i></font>: reload partition table from disk, erasing all changes in
-memory done by the user.
-        <font color="#000080"><i>Wizard</i></font>: go to partition wizard, that the partition filesystems default
-behaviour on startup.
-        <font color="#000080"><i>Restore from floppy</i></font>: restore a partition table from previously saved
-partition table from diskdrake.
-        <font color="#000080"><i>Save to floppy</i></font>: save partition table to floppy.
-        <font color="#000080"><i>Options</i></font>: global options available for filesystem configuration. This
-include <font color="#000080"><i>Removable media automouting supermount</i></font> check box disabled by default.
-      Operation available on partition are:
-        <font color="#000080"><i>Mount point</i></font>: change or define mount point for partition, only
-available for true filesystem partition.
-        <font color="#000080"><i>Resize</i></font>: resize partition, if a specific algorithm to keep data is
-used no data may be lost, else all data are lost but nothing is written by
-diskdrake on the partition data in this last case (this means data can be
-restored by restoring original size and location).
-        <font color="#000080"><i>Delete</i></font>: delete partition, if the same partition is created (same type,
-location, size) all data can be restored as diskdrake doesn't write on partition
-data.
-      Operation available on partition table but in advanced mode are:
-        <font color="#000080"><i>Type</i></font>: change type of partition, all data will be lost but diskdrake as
-above does not destroy them, and everyting can be restored.
-        <font color="#000080"><i>Format</i></font>: format partition, at this point, all data ARE LOST.
-        <font color="#000080"><i>Mount</i></font>: mount partition now, usefull for swap to increase memory
-capacity for machine low on resource that are not available to complete setup
-filesystem step correctly (problably if a resize partition is used on FAT fs).
-allow Mounting swap on customized mode too.
-      A legend for partition type colors is available
-(Ext2,ReiserFS,Swap,FAT,Other,Empty). It has additionnal features to create a
-partition or change its type (only available in advanced mode).
-
-      <font color="#000080"><i>Format partitions</i></font>: step always displayed. display list of partition to
-format with click boxes. Some are defined according to type of partitions and if
-the partition has been created or taken back.
-If a partition has already been formated, it is not proposed, or if it should
-not be proposed (alrady existing partition like /mnt/windows).
-On Advanced tag, an additional dialog is displayed to select partition to format
-(all available partition listed) and to format them with bad block checking.
-
-      <font color="#000080"><i>Choose packages</i></font>: step always displayed. default selection done to be
-<font color="#000080"><i>correct</i></font> according to size available, Install or Upgrade, Hardware available.
-This selection is done according to <font color="#000080"><i>Mandrake first choice</i></font> of packages.
-On all mode, display groups and main desktop used (KDE or Gnome), an
-individual package selection check box is available to allow selecting package
-individually. In this case, a dialog displaying a tree with groups, (Mandrake
-first choice/alternatives) and packages is shown on the left part, a description
-window for each packages is shown on the right part.
-
-      <font color="#000080"><i>Install system</i></font>: step always displayed. no interactive and display
-installation progression. include if available and on a CD basis a spash screen
-of advertising and other (pub!).
-
-      <font color="#000080"><i>Hardware panel</i></font>: step always displayed. show current configuration for
-Mouse, Keyboard, TimeZone, Graphic/TV Card, Monitor.
-At each values chosen (list boxes displayed a
-synthesis description) the current dialog is removed from screen and specific
-configuration panels are displayed (like currently for mouse, keyboard ...).
-And end of these specific configuration panels, this one is remapped on screen
-to be accepted in general.
-
-      <b>Sub steps of Hardware panel:</b>
-
-        <font color="#000080"><i>Configure mouse</i></font>: displayed on request or if the mouse has not been
-moved (so unsafe detection), but have to be displayed earlier. A mouse tree
-selection for type is displayed with default case as what is probed or
-<font color="#000080"><i>serial/Generic 2 button Mouse</i></font> if none has been probed. <font color="#000080"><i>Cancel</i></font> disable mouse
-modification and <font color="#000080"><i>Ok</i></font> allow next mouse configuration dialog. Then comes a serial
-port dialog for serial mice (default mouse connected to COM1 if nothing found).
-Then a mouse screen control is chown (according to mouse capacity: 3 buttons
-with or without mouse, need 7 buttons checking ?). Here <font color="#000080"><i>Ok</i></font> validate to go to
-next step and <font color="#000080"><i>Cancel</i></font> to first mouse dialog displayed (mouse tree selection for
-type).
-
-        <font color="#000080"><i>Configure keyboard</i></font>: displayed on request. default is set according to
-TimeZone definition (itself defaulting to language selection at the beginning).
-A list of keyboard is shown to the user and <font color="#000080"><i>Ok</i></font> validates change and return to
-<font color="#000080"><i>Hardware panel</i></font> dialog with enabled change. <font color="#000080"><i>Cancel</i></font> abort any modification and
-return to the same <font color="#000080"><i>Hardware panel</i></font> dialog.
-
-        <font color="#000080"><i>Configure timezone</i></font>: displayed on request. default is set according to
-language selection. A timezone tree selection is shown with only the subtree
-corresponding to the current selection expanded (as other tree dialog). <font color="#000080"><i>Ok</i></font>
-validates change and return to <font color="#000080"><i>Hardware panel</i></font> dialog whereas <font color="#000080"><i>Cancel</i></font> avoid
-the change before returning to the same main dialog.
-
-        <font color="#000080"><i>Graphic Card</i></font>: display graphic card probed. No change available.
-
-        <font color="#000080"><i>TV Card</i></font>: display TV/Tuner card probed. No change available.
-
-        <font color="#000080"><i>Monitor</i></font>: need execution of ddcxinfos at this point. Only Size, Max
-resolution and depth displayed. No change available.
-
-
-      Miscellaneous step have been removed and dispatched to other steps. "Use
-hard drive optimisation<font color="#000080"><i> and </i></font>Enable num lock at startup<font color="#000080"><i> are removed. </i></font>Choose
-security level<font color="#000080"><i> is moved to security step. </i></font>Precise RAM size if needed" and
-<font color="#000080"><i>Clean /tmp at each boot</i></font> are moved to bootloader step.
-<font color="#000080"><i>Removable media automouting</i></font> is moved to diskdrake options.
-
-      <font color="#000080"><i>Security</i></font>: step displayed only in customized mode. TO BE DEFINED. should
-display at least securty level to choose. level are <font color="#000080"><i>Low</i></font>, <font color="#000080"><i>Medium</i></font>, <font color="#000080"><i>High</i></font> and
-for advanced there are <font color="#000080"><i>Welcome To Crackers</i></font>, <font color="#000080"><i>Poor</i></font>, <font color="#000080"><i>Paranoid</i></font> too.
-
-      <font color="#000080"><i>Configure networking</i></font>: step always displayed. dialog always displayed in
-both <font color="#000080"><i>Recommended</i></font> and <font color="#000080"><i>Customized</i></font> mode. A list of network configuration
-entries are shown with the following:
-        <font color="#000080"><i>Configure a normal modem connection</i></font>
-        <font color="#000080"><i>Configure an ISDN connection</i></font>
-        "Configure a DSL (or ADSL) connection
-        <font color="#000080"><i>Configure a cable connection</i></font>
-        <font color="#000080"><i>Configure local network</i></font>|<font color="#000080"><i>Reconfigure local network</i></font>
-        <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font>
-        <font color="#000080"><i>Done</i></font>
-      By cliking on a specific item, another dialog is displayed to configure
-some specific part of the network.
-        <font color="#000080"><i>Configure a normal modem connection</i></font>: display a question to probe for a
-modem if not already detected, then if none are found or probe has been refused
-a list of possible serial device are listed (in the form ttySx / COM(x+1) with
-the current mouse device removed if it is serial). After that a dialog including
-all parameters than can be used is shown. This includes <font color="#000080"><i>Connection Name</i></font>,
-<font color="#000080"><i>Phone number</i></font>, <font color="#000080"><i>Login ID</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Authentication</i></font>, <font color="#000080"><i>Domain name</i></font>, <font color="#000080"><i>DNS 1</i></font>
-and <font color="#000080"><i>DNS 2</i></font>. Authentication is a combo of <font color="#000080"><i>PAP</i></font>, <font color="#000080"><i>Termina-Based</i></font> and
-<font color="#000080"><i>Script-Based</i></font> (It seems necessary to get CHAP back on this one, no way of
-testing TO BE DEFINED). If no DNS are given, the connection is configured to try
-using provider DNS. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> button are available.
-        <font color="#000080"><i>Configure an ISDN connection</i></font>:
-Try to detect some PCI card. If not detected, asks if it's a ISA/pcmcia or PCI
-card, and gives the list of the cards. Information are then asked: 
-<font color="#000080"><i>Card IRQ</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card mem (DMA)</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card IO</i></font> only if ISA/pcmcia
-<font color="#000080"><i>Card IO_0</i></font> only if ISA/pcmcia with io0
-<font color="#000080"><i>Card IO_1</i></font> only if ISA/pcmcia with io1
-<font color="#000080"><i>Your personal phone number</i></font> phone
-<font color="#000080"><i>Provider name (ex provider.net)</i></font>
-<font color="#000080"><i>Provider phone number</i></font>
-<font color="#000080"><i>Provider dns 1</i></font>
-<font color="#000080"><i>Provider dns 2</i></font>
-<font color="#000080"><i>Dialing mode</i></font> auto or manual
-<font color="#000080"><i>Account Login (user name)</i></font>
-<font color="#000080"><i>Account Password</i></font> hided
-<font color="#000080"><i>Confirm Password</i></font> again
-        <font color="#000080"><i>Configure a DLS (or ADSL) connection</i></font>:
-The user chooses between pptp, pppoe and dhcp. If dhcp, redirection to LAN.
-If there is more than one ethernet card, The user must choose the card to use
-(displayed with the module). After that, some informations are asked:
-<font color="#000080"><i>Provider name (ex provider.net)</i></font>
-<font color="#000080"><i>Provider dns 1</i></font>
-<font color="#000080"><i>Provider dns 2</i></font>
-<font color="#000080"><i>Account Login (user name)</i></font>
-<font color="#000080"><i>Account Password</i></font> hided
-<font color="#000080"><i>Confirm Password</i></font> again
-        <font color="#000080"><i>Configure a cable connection</i></font>: redirection to LAN
-        <font color="#000080"><i>Configure local network</i></font>: display what has been probed with a question
-about using another module and <font color="#000080"><i>Yes</i></font>, <font color="#000080"><i>No</i></font> and <font color="#000080"><i>See hardware info</i></font> buttons.
-<font color="#000080"><i>No</i></font> is the default. If <font color="#000080"><i>Yes</i></font> is clicked a list of modules is displayed with
-<font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> buttons available. <font color="#000080"><i>Cancel</i></font> should go back to previous
-question. If <font color="#000080"><i>See hardware info</i></font> is clicked a list of probed hardware is
-displayed. If <font color="#000080"><i>Yes</i></font> is clicked, for each ethernet interface, a dialog asking for
-IP address, Netmask and Automatic IP check box (DHCP/BOOTP) is displayed. Then
-if DHCP has been chosen, only a dialog asking for Host name and another for HTTP
-proxy and FTP proxy if any. If DHCP has not been chosen, an IP address has to be
-defined and a dialog including <font color="#000080"><i>Host name</i></font>, <font color="#000080"><i>DNS server</i></font>, <font color="#000080"><i>Gateway</i></font> and "Gateway
-device" is displayed. Then the same HTTP proxy and FTP proxy dialog as above. As
-network configuration may to have been reworked a bit it has TO BE DEFINED if
-this is kept like that or not.
-        <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> is just a way to toggle
-networking on or off, may be to be accessible only for advanced mode.
-        <font color="#000080"><i>Quit</i></font> exit the network step.
-
-<b>NETWORK ADVANCED DOCUMENTATION:</b>
-Here is a list of entry points available in post install without using the ugly
-install graphic toolkit:
-
-<a href=<font color="#000080"><i>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</i></font>>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</a>
-
-      <font color="#000080"><i>Configure Printer</i></font>: step always displayed. In recommended mode, only
-activated if a local printer is detected, else no printer are configured by
-default. In customized mode or if the step has been clicked a list of printer
-already configured is displayed and the possibility to add or exit the
-configuration. It allow configuration of printers for both LPR and CUPS
-individually (available by advanced mode when adding a printer). Printer
-protocol managed are local/usb/samba/ncp/lpd for LPR and
-local/usb/serial/samba/lpd/cups_network for CUPS.
-
-      <font color="#000080"><i>Set root password</i></font>: step always displayed for Install only. In
-recommended mode display only a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry
-to select the root password. In advanced mode, a Use NIS (yellow pages) check
-boxes and Use MD5 check box are available. <font color="#000080"><i>Ok</i></font> validate root password and "No
-password<font color="#000080"><i> avoid setting a password. </i></font>No password<font color="#000080"><i> is only available in </i></font>Low"
-security level or less. The length of the minimal password depend upon security level.
-
-In corporate firewall :
-      <font color="#000080"><i>Set admin password</i></font>: step always displayed for Install only. It only
-      displays a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry
-to select the admin password. 
-The length of the minimal password depend upon security level. (double of the
-      security level)
-
-      <font color="#000080"><i>Add a user</i></font>: step always displayed for Install Only. In recommend mode
-display <font color="#000080"><i>Real name</i></font>, <font color="#000080"><i>User name</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font> and icon
-choices as graphical. For customized mode a shell combo is available to choose a
-specific shell for the user depending on the package installed. The real name is
-the user friendly name of the user whereas user name is its login id name. The
-box display user that have already been added below the title. <font color="#000080"><i>Accept user</i></font>
-button allow the creation of the user and <font color="#000080"><i>Done</i></font> finish this step. High or
-higher security level implies the creation of at least one user. Password length
-are subject to same restriction according to security level. In advanced mode,
-allow to choose the user in auto login mode.
-
-      <font color="#000080"><i>Create a boot disk</i></font>: step always displayed. In recommended mode this
-step is automatically done by doing nothing. If clicked or customized mode, the
-user is prompted to allow building a boot disk (default is yes). In advanced
-mode allow selection of floppy drive.
-
-      <font color="#000080"><i>Install boot loader</i></font>: step always displayed. In recommended mode this
-step is automatically done. In customized mode, a combo <font color="#000080"><i>Boot device</i></font> list the
-various boot device that can be used where the bootloader can be installed. The
-boot device can the Linux description of the whole disk available (ex: /dev/hda)
-or partition available in these disk or floppy drives. Other platform
-specificity are not listed here.
-      LBA check box is displayed in advanced mode (enabled by default) to
-allow using LBA addressing if available (PC with LILO). bootloader combo to
-select a given bootloader to use, available choice are <font color="#000080"><i>Grub</i></font>, "LILO with text
-menu<font color="#000080"><i>, </i></font>LILO with graphical menu<font color="#000080"><i>. default chosen is </i></font>LILO
-with graphical menu<font color="#000080"><i>. </i></font>Delay before booting default image" entry
-field is available with default value current setting (upgrade) or 5 else.
-<font color="#000080"><i>Precise RAM size if needed (found xx MB)</i></font> entry is displayed too,
-<font color="#000080"><i>clean /tmp</i></font> check box is disabled by default too.
-Boot in graphical mode (init 5) is available here in advanced mode too
-(previously in X configuration). <font color="#000080"><i>Video mode</i></font> combo, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font>,
-<font color="#000080"><i>Restrict command line options</i></font> check box is displayed.
-Video mode combo list text mode and video mode used for frame buffer, video mode
-used for frame buffer are available only if the install managed to boot with
-frame buffer activated. Password are restricted according to security level as
-other password. Password are mandatory according to security level TO BE DEFINED.
-
-      <font color="#000080"><i>Configure X</i></font>: step always displayed. By default on recommended mode,
-everything is done automatically if possible up to test of graphic card, and if
-the user accept the settings no more question are asked to him. In customized
-mode a dialog is displayed to choose resolution, color depth and which version
-of XFree (with 3D optionally) is available for the current card where only a
-short description is displayed. <font color="#000080"><i>Ok</i></font> button allow to jump to test phase (for the
-first time only) if available. <font color="#000080"><i>Cancel</i></font> return to main XFree configuration
-window allowing to change Monitor, Graphic card, Server options or Resolution
-with X version to choose. <font color="#000080"><i>Show all</i></font> extend resolution list to more resolutions
-according to card (with onboard memory) only and no more monitor capabilities.
-      The main dialog is a list of command to change some X configuration aspect
-according to advanced mode or not :
-        <font color="#000080"><i>Change Monitor</i></font>: display a tree selection of monitors where default one
-is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available.
-        <font color="#000080"><i>Change Graphic card</i></font>: display a tree selection of graphic card where
-default one is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. If <font color="#000080"><i>Unlisted</i></font>
-is chosen, then a tree of server/driver is displayed containing available server
-for XF3 or driver for XF4. <font color="#000080"><i>Cancel</i></font> return to main window and <font color="#000080"><i>Ok</i></font> validates
-change.
-        <font color="#000080"><i>Change Server options</i></font>: available only in advanced mode. display list
-of check boxes options for server currently used. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> available.
-        <font color="#000080"><i>Change Resolution</i></font>: change resolution and depth including with X server
-version chosen (relative to Xdrakres too).
-        <font color="#000080"><i>Show Information</i></font>: display an information dialog showing current
-configuration internals of X.
-        <font color="#000080"><i>Test again</i></font>: restart test with current configuration of X.
-        <font color="#000080"><i>Quit</i></font>: exit X configuration main window. Other question about autologin
-and window manager to use are asked on Add user step.
-
-      <font color="#000080"><i>Exit install</i></font>: step displayed only in customized mode but always
-executed. Only a text is displayed with a <font color="#000080"><i>Ok</i></font> button. If clicked and some step
-have not been executed/completed correctly, a question dialog ask the user if he
-really want to quit now, default answer is <font color="#000080"><i>No</i></font>. Advanced switch let user access
-to do the previously <font color="#000080"><i>Auto install floppy</i></font> step in DrakX &lt; 8.0. This is just a
-question asking the user to generate an auto install floppy automatically.
-</pre>
-</body>
-</html>
diff --git a/docs/wizard.doc b/docs/wizard.doc
deleted file mode 100644
index 0bbf8d254..000000000
--- a/docs/wizard.doc
+++ /dev/null
@@ -1,31 +0,0 @@
-How to handle wizard?
-
-to switch in wizard mode:
-set $::isWizard to true;
-if $::Wizard_no_previous is set to true, the wizard won't display the previous button. Usefull for first step
-if $::Wizard_finished is set to true, the wizard will display Finish instead of Next. Usefull for last step
-
-how to code:
-Code as if there were no wizard.
-OK button is displayed as Next
-Cancel is displayed as Previous
-a additional button Cancel is added, xhich die with the exception 'wizard_cancelled'
-
-You have to handle the previous button. For example:
-
-step 1:
-ask_from list( blablablabl) or return;
-step2:
-ask_from list( blablablabl) or goto step1;
-step3:
-ask_from list( blablablabl) or goto step2;
-
-etc... You don't have to handle the wizard Cancel button as it send an exception.
-
-Understood? If yes, you'll see that there is a pb with ask_yesorno. In this case, yes+next returns true, no+next returns false, Cancel send the exception 'wizard_canceled' and previous send the exception 'wizard previous'. So you have to handle the previous button manually.
-
-plop.
-
-dam's, pour vous servir
-
-
diff --git a/help.msg.xml b/help.msg.xml
deleted file mode 100644
index 37ead3180..000000000
--- a/help.msg.xml
+++ /dev/null
@@ -1,21 +0,0 @@
-<document>
-                  <green>Welcome to <blue>Mandrakelinux</blue> install help</green>
-
-In most cases, the best way to get started is to simply press the <yellow>&lt;Enter&gt;</yellow> key.
-If you experience problems with standard install, try one of the following 
-install types (type the highlighted text and press <yellow>&lt;Enter&gt;</yellow>):
-
- o  <white>vgalo</white> for low resolution graphical installation.
- o  <white>text</white> for text installation instead of the graphical one.
- o  <white>linux</white> for standard graphical installation at normal resolution.
-
-
-To repair an already installed system type <white>rescue</white> followed
-by <yellow>&lt;Enter&gt;</yellow>.
-
-You can also pass some <white>&lt;specific kernel options&gt;</white> to the Linux kernel. 
-For example, try <white>linux noapic</white> if your system has trouble operating
-your network adapter correctly.
-<red>NOTE</red>: You cannot pass options to modules (SCSI, ethernet card) or devices
-such as CD-ROM drives in this way. If you need to do so, use noauto mode.
-</document>
diff --git a/isolinux-graphic-simple.bmp b/isolinux-graphic-simple.bmp
deleted file mode 100644
index eada90017..000000000
--- a/isolinux-graphic-simple.bmp
+++ /dev/null
diff --git a/isolinux-graphic-simple.bmp.parameters b/isolinux-graphic-simple.bmp.parameters
deleted file mode 100644
index 8fd220512..000000000
--- a/isolinux-graphic-simple.bmp.parameters
+++ /dev/null
@@ -1,10 +0,0 @@
-clear_h=800
-clear_w=600
-isolinux_mode=1
-mode=259
-progress_c=189
-progress_h=13
-progress_real_w=425
-progress_w=4
-progress_x=186
-progress_y=396
diff --git a/isolinux-graphic.bmp b/isolinux-graphic.bmp
deleted file mode 100644
index 407c99721..000000000
--- a/isolinux-graphic.bmp
+++ /dev/null
diff --git a/isolinux-graphic.bmp.parameters b/isolinux-graphic.bmp.parameters
deleted file mode 100644
index 8fd220512..000000000
--- a/isolinux-graphic.bmp.parameters
+++ /dev/null
@@ -1,10 +0,0 @@
-clear_h=800
-clear_w=600
-isolinux_mode=1
-mode=259
-progress_c=189
-progress_h=13
-progress_real_w=425
-progress_w=4
-progress_x=186
-progress_y=396
diff --git a/kernel/.cvsignore b/kernel/.cvsignore
deleted file mode 100644
index 66624465e..000000000
--- a/kernel/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-modules.description
-all.kernels
diff --git a/kernel/Makefile b/kernel/Makefile
deleted file mode 100644
index 0b4695ba1..000000000
--- a/kernel/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-all: all.kernels
-
-all.kernels: ../mdk-stage1/mar/mar update_kernel list_modules.pm
-	./update_kernel
-
-../mdk-stage1/mar/mar:
-	make -C `dirname $@` mar
-
-clean:
-	rm -rf *~ modules.description all.kernels
-
-check:
-	perl modules.pl check > /dev/null
-	@echo "unlisted drivers: "
-	@for i in $$(cut -f 2 -d \" /usr/share/ldetect-lst/pcitable|egrep -v '^#|ADSL:|Bad:|Card:|H[cs]f:|ISDN:|LT:'|sort|uniq|less);do fgrep -q $$i list_modules.pm|| echo -n "$$i ";done
-	@echo
diff --git a/kernel/list_modules.pm b/kernel/list_modules.pm
deleted file mode 100644
index d711f6d68..000000000
--- a/kernel/list_modules.pm
+++ /dev/null
@@ -1,316 +0,0 @@
-package list_modules; # $Id$
-
-use MDK::Common;
-
-our @ISA = qw(Exporter);
-our @EXPORT = qw(load_dependencies dependencies_closure category2modules module2category sub_categories kernel_is_26 module_extension);
-
-# the categories have 2 purposes
-# - choosing modules to include on stage1's (cf update_kernel and mdk-stage1/pci-resource/update-pci-ids.pl)
-# - performing a load_category or probe_category (modules.pm and many files in perl-install)
-
-our %l = (
-  ################################################################################
-  network => 
-  {
-    atm => [ qw(ambassador eni firestream he horizon idt77252 iphase lanai nicstar zatm) ],
-    main => [
-      if_(arch() =~ /ppc/, qw(bmac ibm_emac mace oaknet sungem)),
-      if_(arch() =~ /^sparc/, qw(sunbmac sunhme sunqe)),
-      if_(arch() !~ /alpha|sparc/,
-        qw(3c501 3c503 3c505 3c507 3c509 3c515 3c990 3c990fx),
-        qw(82596 ac3200 acenic aironet4500_card amd8111e at1700 atp),
-        qw(b44 bcm4400 com20020-pci cs89x0 de2104x de600 de620),
-        qw(defxx), # most unused
-        qw(depca dgrs dmfe e100 e2100 eepro eepro100 eexpress epic100 eth16i),
-        qw(ewrk3  fealnx hamachi hp hp-plus hp100),
-        qw(iph5526), #- fibre channel
-        qw(lance natsemi ne ne2k-pci ni5010 ni52 ni65 nvnet),
-        qw(pcnet32 plip prism2_plx rcpci rhineget),
-        qw(sb1000 sis900 skfp smc-ultra smc9194 starfire),
-        qw(tc35815 tlan tulip typhoon uli526x via-rhine),
-        qw(wd winbond-840 forcedeth),
-        qw(sungem sunhme), # drivers for ultrasparc, but compiled in ix86 kernels...
-      ),
-      qw(3c59x 8139too 8139cp sundance), #rtl8139
-    ],
-    firewire => [ qw(eth1394 pcilynx) ],
-    gigabit => [
-      qw(cxgb dl2k e1000 ixgb myri_sbus ns83820 r8169 s2io sis190 sk98lin skge tg3 via-velocity yellowfin ),
-      qw(bcm5820 bcm5700), #- encrypted
-    ],
-
-    raw => [
-      qw(ppp_generic ppp_async ppp_deflate bsd_comp),
-    ],
-    pcmcia => [ 
-      qw(3c574_cs 3c589_cs axnet_cs fmvj18x_cs),
-      qw(ibmtr_cs nmclan_cs pcnet_cs smc91c92_cs),
-      qw(xirc2ps_cs xircom_cb xircom_tulip_cb),
-    ],
-   #- generic NIC detection for USB seems broken (class, subclass, 
-   #- protocol reported are not accurate) so we match network adapters against
-   #- known drivers :-(
-    usb => [ 
-      qw(catc CDCEther kaweth pegasus rtl8150 usbnet),
-    ],
-    wireless => [
-      qw(acx100_pci adm8211 airo airo_cs aironet4500_cs aironet_cs),
-      qw(at76c503-i3861 at76c503-i3863 at76c503-rfmd at76c503-rfmd-acc at76c505-rfmd at76c505-rfmd2958 at76c505a-rfmd2958),
-      qw(ath_pci atmel_cs atmel_pci dyc_ar5),
-      qw(hostap_pci hostap_plx ipw2100 ipw2200 madwifi_pci netwave_cs orinoco orinoco_cs orinoco_pci orinoco_plx),
-      qw(prism2_cs prism2_pci prism2_usb prism54 r8180 ray_cs rt2400 rt2500 usbvnet_rfmd vt_ar5k wavelan_cs wvlan_cs zd1201),
-      if_(arch() =~ /ppc/, qw(airport)),
-    ],
-    isdn => [
-      qw(avmfritz c4 cdc-acm b1pci divas hfc4s8s_l1 hfc_usb hisax hisax_st5481 hisax_fcpcipnp hysdn sedlfax t1pci tpam w6692pci),
-      qw(fcpci fcdsl fcdsl fcdsl2 fcdslsl fcdslslusb fcdslusb fcdslusba fcusb fcusb2 fxusb fxusb_CZ)
-    ],
-    modem => [
-      qw(ltmodem mwave ),
-    ],
-    slmodem => [
-      qw(slamr slusb snd-atiixp-modem snd-intel8x0m snd-via82xx-modem),
-    ],
-    tokenring => [ qw(3c359 abyss ibmtr lanstreamer olympic proteon skisa smctr tms380tr tmspci) ],
-    wan => [ qw(c101 cosa cyclomx cycx_drv dlci farsync hdlc hostess_sv11 n2 pc300 pci200syn sbni sdla sdladrv sealevel syncppp wanxl z85230) ],
-    usb_dsl => [ qw(cxacru eagle-usb speedtch usbatm xusbatm) ],
-  },
-
-  ################################################################################
-  disk => 
-  {
-    # ide drivers compiled as modules:
-    ide => [ qw(aec62xx cs5520 cs5530 delkin_cb ide-generic rz1000 sc1200 slc90e66 triflex trm290) ],
-    # ide drivers compiled in core kernel:
-    all_ide => [
-        qw(ali14xx amd74xx dtc2278 ht6560b qd65xx umc8672 aec62xx alim15x3 atiixp cmd64x cs5520 cs5530 cy82c693),
-        qw(hpt34x hpt366 ns87415 opti621 pdc202xx_new pdc202xx_old piix rz1000 sc1200 serverworks),
-        qw(siimage sis5513 slc90e66 triflex trm290 via82cxxx),
-    ],
-    scsi => [
-      if_(arch() =~ /ppc/, qw(mesh mac53c94)),
-      if_(arch() =~ /^sparc/, qw(qlogicpti)),
-      if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-	'53c7,8xx',
-        qw(AM53C974 BusLogic NCR53c406a a100u2w advansys aha152x aha1542 aha1740),
-        qw(atp870u dc395x dc395x_trm dmx3191d dtc g_NCR5380 in2000 initio pas16 pci2220i psi240i fdomain),
-        qw(qla1280 qla2x00 qlogicfas qlogicfc),
-        qw(seagate wd7000 sim710 sym53c416 t128 tmscsim u14-34f ultrastor),
-        qw(eata eata_pio eata_dma nsp32),
-      ),
-      qw(aic7xxx aic7xxx_old aic79xx pci2000 qlogicisp sym53c8xx lpfc lpfcdd), # ncr53c8xx
-    ],
-    sata => [
-      # note that ata_piix manage RAID devices on ICH6R
-      qw(ahci ata_adma ata_piix sata_nv sata_promise sata_qstor sata_sil sata_sil24 sata_sis sata_svw sata_sx4 sata_uli sata_via sata_vsc sx8),
-    ],
-    hardware_raid => [
-      if_(arch() =~ /^sparc/, qw(pluto)),
-      if_(arch() !~ /alpha/ && arch() !~ /sparc/,
-        # 3w-xxxx drives ATA-RAID, 3w-9xxx and arcmsr drive SATA-RAID
-        qw(a320raid),
-        qw(3w-9xxx 3w-xxxx aacraid arcmsr cciss cpqfc cpqarray DAC960 dpt_i2o gdth i2o_block ipr it821x it8212),
-        qw(iteraid megaraid megaraid_mbox megaraid_sas mptscsih qla2100 qla2200 qla2300 qla2322 qla4xxx qla6312 qla6322 pdc-ultra),
-        qw(ips ppa imm),
-       if_(c::kernel_version =~ /^\Q2.4/,
-	qw(ataraid hptraid silraid pdcraid)
-       ),
-      ),
-    ],
-    pcmcia => [ qw(aha152x_cs fdomain_cs nsp_cs qlogic_cs ide-cs) ], #ide_cs
-    raw => [ qw(sd_mod) ],
-    usb => [ qw(usb-storage) ],
-    firewire => [ qw(sbp2) ],
-    cdrom => [ qw(ide-cd sr_mod) ],
-  },
-
-  ################################################################################
-
-  bus => 
-  {
-    usb => [ qw(usb-uhci usb-ohci ehci-hcd uhci-hcd ohci-hcd) ],
-    bluetooth => [ qw(bcm203x bfusb bpa10x hci_usb) ],
-    firewire => [ qw(ohci1394) ],
-    i2c => [
-      qw(i2c-ali1535 i2c-ali1563 i2c-ali15x3 i2c-amd756 i2c-amd8111 i2c-i801 i2c-i810 i2c-nforce2),
-      qw(i2c-piix4 i2c-prosavage i2c-savage4 i2c-sis5595 i2c-sis630 i2c-sis96x i2c-via i2c-viapro i2c-voodoo3),
-      if_(arch() !~ /^ppc/, qw(i2c-hydra i2c-ibm_iic i2c-mpc)),
-    ],
-    pcmcia => [
-      if_(arch() !~ /^sparc/, qw(au1x00_ss i82365 i82092 pd6729 tcic vrc4171_card vrc4173_cardu yenta_socket)), # cb_enabler
-    ],
-    usb_keyboard => [ qw(usbkbd keybdev) ],
-   #serial_cs
-   #ftl_cs 3c575_cb apa1480_cb epic_cb serial_cb tulip_cb iflash2+_mtd iflash2_mtd
-   #cb_enabler
-  },
-
-  fs => 
-  {
-    network => [ qw(af_packet nfs) ],
-    cdrom => [ qw(isofs) ],
-    loopback => [ qw(isofs loop cryptoloop gzloop), if_($ENV{MOVE}, qw(supermount)) ],
-    local => [
-      if_(arch() =~ /^i.86|x86_64/, qw(vfat ntfs)),
-      if_(arch() =~ /^ppc/, qw(hfs)),
-      qw(reiserfs),
-    ],
-    various => [ qw(smbfs romfs ext3 xfs jfs ufs ntfs) ],
-
-  },
-
-  ################################################################################
-  multimedia => 
-  {
-    sound => [
-      if_(arch() =~ /ppc/, qw(dmasound_pmac snd-powermac)),
-      if_(arch() =~ /sparc/, qw(snd-sun-amd7930 snd-sun-cs4231 snd-sun-dbri)),
-      if_(arch() !~ /^sparc/,
-          qw(ad1816 ad1848 ad1889 ali5455 audigy audio awe_wave cmpci cs4232 cs4281 cs46xx),
-          qw(emu10k1 es1370 es1371 esssolo1 forte gus i810_audio ice1712 kahlua mad16 maestro),
-          qw(maestro3 mpu401 msnd_pinnacle nm256_audio nvaudio opl3 opl3sa opl3sa2 pas2 pss),
-          qw(rme96xx sam9407 sb sgalaxy snd-ad1816a snd-ad1848 snd-ali5451 snd-als100),
-          qw(snd-als4000 snd-atiixp snd-au8810 snd-au8820 snd-au8830 snd-audigyls snd-azt2320 snd-azt3328 snd-azx),
-          qw(snd-bt87x snd-ca0106 snd-cmi8330 snd-cmipci snd-cs4231 snd-cs4232 snd-cs4236 snd-cs4281),
-          qw(snd-cs46xx snd-darla20 snd-darla24 snd-dt019x snd-emu10k1 snd-emu10k1x snd-ens1370 snd-ens1371 snd-es1688 snd-es18xx),
-          qw(snd-es1938 snd-es1968 snd-es968 snd-fm801 snd-gina20 snd-gina24 snd-gina3g snd-gusclassic snd-gusextreme),
-          qw(snd-gusmax snd-hda-intel snd-hdsp snd-hdspm snd-ice1712 snd-ice1724 snd-indi snd-indigo snd-indigodj snd-indigoio snd-intel8x0 snd-interwave),
-          qw(snd-interwave-stb snd-korg1212 snd-layla20 snd-layla24 snd-layla3g snd-maestro3 snd-mia snd-mixart snd-mona snd-mpu401 snd-nm256),
-          qw(snd-opl3sa2 snd-opti92x-ad1848 snd-opti92x-cs4231 snd-opti93x snd-pcxhr snd-rme32),
-          qw(snd-rme96 snd-rme9652 snd-sb16 snd-sb8 snd-sbawe snd-sgalaxy snd-sonicvibes),
-          qw(snd-sscape snd-trident snd-via82xx snd-vx222 snd-vxp440 snd-vxpocket snd-wavefront),
-          qw(snd-ymfpci sonicvibes sscape trident via82cxxx_audio wavefront ymfpci),
-      ),
-    ],
-    tv => [ qw(bt878 bttv cx8800 cx88-blackbird dpc7146 ivtv saa7134 zr36067) ],
-    dvb => [ qw(budget budget-av budget-ci cinergyT2 dvb-dibusb dvb-ttpci dvb-ttusb-budget hexium_orion hexium_gemini skystar2) ],
-    photo => [ qw(dc2xx mdc800) ],
-    radio => [ qw(radio-gemtek-pci radio-maxiradio) ],
-    scanner => [ qw(scanner microtek) ],
-    gameport => [ qw(cs461x ns558 emu10k1-gp fm801-gp lightning ns558 vortex) ],
-    usb_sound => [ qw(audio dabusb dsbr100 snd-usb-audio snd-usb-usx2y usb-midi) ],
-    webcam => [ qw(cpia_usb cyber2000fb ibmcam konicawc mod_quickcam ov511 ov511-alt ov518_decomp ovfx2 pwc quickcam se401 stv680 sn9c102 ultracam usbvideo usbvision vicam w9968cf) ],
-  },
-
-  # USB input stuff get automagically loaded by hotplug and thus
-  # magically work through /dev/input/mice multiplexing:
-  input => {
-      joystick => [
-          qw(iforce xpad),
-          # there're more drivers in drivers/input/joystick but they support non USB or PCI devices
-          # and thus cannot be detected but by slow (and maybe dangerous?) load_category:
-          qw(a3d adi analog cobra db9 gamecon gf2k grip grip_mp guillemot interact),
-          qw(joydump magellan sidewinder spaceball spaceorb stinger tmdc turbografx warrior)
-      ],
-      remote => [ qw(ati_remote) ],
-      # USB tablets and touchscreens:
-      tablet => [ qw(acecad aiptek wacom kbtab) ],
-      touchscreen => [ qw(mtouchusb touchkitusb) ],
-  },
-
-  various => 
-  # just here for classification, unused categories (nor auto-detect, nor load_thiskind)
-  {
-    raid => [
-      qw(dm-crypt dm-mirror dm-mod linear lvm-mod multipath raid0 raid1 raid10 raid5),
-    ],
-    mouse => [
-      qw(atixlmouse busmouse generic_serial inport logibm logibusmouse msbusmouse pcips2 qpmouse synclinkmp),
-      if_(arch() =~ /ppc/, 'macserial'),
-      qw(hid mousedev usbhid usbmouse),
-    ],
-    char => [
-      if_(arch() =~ /ia64/, qw(efivars)),
-      qw(applicom n_r3964 nvram pc110pad ppdev),
-      qw(wdt_pci i810-tco sx), #- what are these???
-    ],
-    crypto => [
-      qw(amd768_rng amd7xx_tco i810_rng hw_random leedslite padlock),
-    ],
-    laptop => [
-      qw(i8k sonypi toshiba),
-    ],
-    serial => [
-      qw(8250_pci 8250 epca esp isicom istallion moxa mxser stallion sx synclink synclinkmp),
-    ],
-    other => [
-      qw(defxx i810fb ide-floppy ide-scsi ide-tape loop lp nbd sg st),
-      qw(parport_pc parport_serial),
-      qw(btaudio),
-
-      arch() =~ /i.86/ ? 'aes-i586' : 'aes',
-      if_(arch() =~ /sparc/, 'openprom'),
-      
-      qw(evdev), qw(usblp printer), 'floppy',
-
-      #- these need checking
-      qw(rrunner meye),
-    ],
-    agpgart => [
-      if_(arch() =~ /alpha/, qw(alpha-agp)),
-      if_(arch() =~ /ia64/, qw(hp-agp i460-agp)),
-      if_(arch() =~ /ppc/, qw(uninorth-agp)),
-
-      qw(ali-agp amd64-agp amd-k7-agp ati-agp efficeon-agp intel-agp),
-	 qw(k7-agp mch-agp nvidia-agp sis-agp sworks-agp via-agp),
-    ],
-  },
-);
-
-my %dependencies;
-
-sub load_dependencies {
-    my ($file) = @_;
-
-    %dependencies = map {
-	my ($f, $deps) = split ':';
-	$f => [ split ' ', $deps ];
-    } cat_($file);
-}
-
-sub dependencies_closure {
-    my @l = map { dependencies_closure($_) } @{$dependencies{$_[0]} || []};
-    (@l, $_[0]);
-}
-
-sub category2modules {
-    map {
-	my ($t1, $t2s) = m|(.*)/(.*)|;
-	my @sub = $t2s eq '*' ? keys %{$l{$t1}} : split('\|', $t2s);
-	map {
-	    my $l = $l{$t1}{$_} or die "bad category $t1/$_\n" . backtrace();
-	    @$l;
-	} @sub;
-    } split(' ', $_[0]);
-}
-
-sub all_modules() {
-    map { @$_ } map { values %$_ } values %l;
-}
-
-sub module2category {
-    my ($module) = @_;
-    foreach my $t1 (keys %l) {
-	my $h = $l{$t1};
-	foreach my $t2 (keys %$h) {
-	  $module eq $_ and return "$t1/$t2" foreach @{$h->{$t2}};
-      }
-    }
-    return;
-}
-
-sub ethernet_categories() {
-    'network/main|gigabit|pcmcia|tokenring|usb|wireless|firewire';
-}
-
-sub sub_categories {
-    my ($t1) = @_;
-    keys %{$l{$t1}};
-}
-
-sub kernel_is_26 { $_[0] =~ /^2\.6/ }
-
-sub module_extension { kernel_is_26($_[0]) ? 'ko' : 'o' }
-
-1;
diff --git a/kernel/modules.pl b/kernel/modules.pl
deleted file mode 100644
index 22f71e048..000000000
--- a/kernel/modules.pl
+++ /dev/null
@@ -1,280 +0,0 @@
-use strict;
-
-
-BEGIN {
-    #- for testing purpose
-    (my $f = __FILE__) =~ s|/[^/]*$||;
-    push @INC, $f;
-}
-
-use MDK::Common;
-use list_modules;
-
-#- seldom used modules
-#- we don't bother making a special floppy for those
-my %modules_only_for_all_img = (
-
-  'network/main' => [
-    qw(acenic),
-    qw(aironet4500_card com20020-pci hamachi starfire winbond-840),
-
-    if_(arch() =~ /alpha|ppc/, qw(sb1000)),
-    qw(iph5526),
-
-    qw(ac3200 at1700 atp ni5010 ni52 ni65),  #- unused from Jeff
-  ],
-
-  'disk/scsi' => [
-    # ISA cards:
-    qw(NCR53c406a aha152x psi240i qlogicfas qlogicfc wd7000 sim710 t128 ultrastor), '53c7,8xx',
-    qw(qla2x00 in2000 pas16 a100u2w seagate g_NCR5380),
-    if_(arch() =~ /x86_64/, qw(53c7,8xx nsp32 initio advansys atp870u)), #- old
-    qw(AM53C974), # deprecated by tmscsim
-    qw(u14-34f), #- duplicate from ultrastor.o
-    #- still used, keeping them: qw(aha1542 sym53c416),
-    qw(lpfcdd), #- HUGE!!
-
-    qw(dc395x dc395x_trm dmx3191d qla1280 BusLogic fdomain),
-    qw(pci2220i eata eata_pio eata_dma),
-    'aic7xxx_old', 'qlogicisp',
-    'dtc',
-  ],
-  'disk/sata' => [
-    qw(ahci ata_piix sata_nv sata_promise sata_sil sata_sis sata_svw sata_sx4 sata_uli sata_via sata_vsc sx8),
-  ],
-
-  'disk/hardware_raid' => [
-    qw(i2o_block qla2200 qla2300 cpqfc DAC960 gdth pdc-ultra mptscsih),
-  ],
-);
-
-#- modules that will only be available in stage2
-#-   those modules are NOT in all.img, network.img...
-#-   there should only be modules that can't be used on stage1
-#-   completly unused modules should be removed directly from the kernel
-#-     (and so be removed from stage2 too)
-my %modules_removed_from_stage1 = (
-  'network/main' => [
-     'plip'
-  ],
-
-  'disk/hardware_raid' => [
-    qw(imm ppa),
-  ],
-);
-
-my @modules_always_on_stage1 = qw(floppy);
-
-
-sub flatten_and_check {
-    my ($h) = @_;
-    map { 
-	my $category = $_;
-	my @l = @{$h->{$category}};
-	if (my @bad = difference2(\@l, [ category2modules($category) ])) {
-	    foreach (@bad) {
-		if (my $cat = module2category($_)) {
-		    warn "ERROR in modules.pl: module $_ is in category $cat, not in $category\n";
-		} else {
-		    warn "ERROR in modules.pl: unknown module $_\n";
-		}
-	    }
-	    exit 1;
-	}
-	@l;
-    } keys %$h;
-}
-
-my @modules_only_for_all_img    = flatten_and_check(\%modules_only_for_all_img);
-my @modules_removed_from_stage1 = flatten_and_check(\%modules_removed_from_stage1);
-
-
-my %images = (
-    pcmcia  => 'fs/cdrom|loopback disk/cdrom|raw|pcmcia bus/pcmcia',
-    cdrom   => 'fs/cdrom|loopback disk/cdrom|raw|scsi',
-    network  => 'bus/usb|usb_keyboard|pcmcia disk/raw|usb',
-    network_drivers => 'fs/network|loopback network/main|pcmcia|usb|raw|gigabit',
-    all     => 'fs/cdrom disk/cdrom|raw bus/usb|usb_keyboard disk/usb|scsi fs/loopback|local bus/pcmcia disk/ide|pcmcia|sata|hardware_raid fs/network network/main|pcmcia|usb|raw|gigabit|wireless|tokenring bus/firewire disk/firewire',
-);
-
-my $verbose = $ARGV[0] eq '-v' && shift;
-my ($f, @para) = @ARGV;
-$::{$f}->(@para);
-
-sub image2modules {
-    my ($image) = @_;
-    my $l = $images{$image};
-
-    my @modules = if_($image !~ /drivers/, @modules_always_on_stage1);
-    push @modules, map { category2modules($_) } split(' ', $l);
-	
-    @modules = difference2(\@modules, \@modules_removed_from_stage1);
-
-    if ($image !~ /all/) {
-	@modules = difference2(\@modules, \@modules_only_for_all_img);
-    }
-
-    @modules;
-}
-
-sub remove_unneeded_modules {
-    my ($kern_ver) = @_;
-
-    #- need creating a first time the modules.dep for all modules
-    #- it will be redone in make_modules_dep when unneeded modules are removed
-    make_modules_dep($kern_ver);
-    load_dependencies("all.kernels/$kern_ver/modules.dep");
-
-    my $ext = module_extension($kern_ver);
-
-    my @all = list_modules::all_modules();
-    my @all_with_deps = map { dependencies_closure($_) } @all;
-    my %wanted_modules = map {; "$_.$ext" => 1 } @all_with_deps;
-    foreach (all("all.kernels/$kern_ver/modules")) {
-	$wanted_modules{$_} or unlink "all.kernels/$kern_ver/modules/$_";	
-    }
-}
-
-sub make_modules_per_image {
-    my ($kern_ver) = @_;
-
-    make_modules_dep($kern_ver);
-    load_dependencies("all.kernels/$kern_ver/modules.dep");
-
-    my $ext = module_extension($kern_ver);
-
-    foreach my $image (keys %images) {
-	my @modules_with_deps = uniq(map { dependencies_closure($_) } image2modules($image));
-	my @l = map { "$_.$ext" } @modules_with_deps;
-
-	my $dir = "all.kernels/$kern_ver/modules";
-	@l = grep { -e "$dir/$_" } @l;
-
-	if ($image =~ /all/) {
-	    system("cd $dir ; tar cf ../${image}_modules.tar @l") == 0 or die "tar failed\n";
-	} else {
-	    my $gi_base_dir = chomp_(`pwd`) . '/..';
-	    system("cd $dir ; $gi_base_dir/mdk-stage1/mar/mar -c ../${image}_modules.mar @l") == 0 or die "mar failed\n";
-	}
-    }
-}
-
-sub make_modules_dep {
-    my ($kern_ver) = @_;
-
-    my @l =
-      kernel_is_26($kern_ver) ?
-	cat_("all.kernels/$kern_ver/lib/modules/$kern_ver/modules.dep") :
-	`/sbin/depmod-24 -F all.kernels/$kern_ver/boot/System.map-$kern_ver -e *.o | perl -pe 's/\\\n//'`;
-
-    @l = map {
-	if (/(\S+):\s+(.*)/) {
-	    my ($module, @deps) = map { m!.*/(.*)\.k?o(\.gz)$! && $1 } $1, split(' ', $2);
-	    if (member($module, 'plip', 'ppa', 'imm')) {
-		@deps = map { $_ eq 'parport' ? 'parport_pc' : $_ } @deps;
-	    } elsif ($module eq 'vfat') {
-		push @deps, 'nls_cp437', 'nls_iso8859-1';
-	    }
-	    if_(@deps, join(' ', "$module:", @deps));
-	} else {
-	    ();
-	}
-    } @l;
-
-    output("all.kernels/$kern_ver/modules.dep", map { "$_\n" } @l);
-}
-
-sub make_modules_description {
-    my ($kern_ver) = @_;
-    my $ext = module_extension($kern_ver);
-    my $dir = "all.kernels/$kern_ver/modules";
-
-    my @l;
-    if (kernel_is_26(`uname -r`)) { #- modinfo behaves differently depending on the build kernel used
-	my $name;
-	@l = map {
-	    $name = $1 if m!^filename:\s*(.*)\.$ext!;
-	    if_($name && /^description:\s*(.*)/, "$name\t$1");
-	} `cd $dir ; /sbin/modinfo *.$ext`;
-    } else {
-	@l = map {
-	    if_(/(.*?)\.$ext "(.*)"/, "$1\t$2\n");
-	} `cd $dir ; /sbin/modinfo-24 -f '%{filename} %{description}\n' *.$ext`;
-    }
-    output("modules.description", @l);
-}
-
-sub pci_modules4stage1 {
-    my ($category) = @_;
-    my @modules = difference2([ category2modules($category) ], \@modules_removed_from_stage1);
-    print "$_\n" foreach uniq(map { dependencies_closure($_) } @modules);
-}
-
-sub check() {
-    my $error;
-    my %listed;
-    while (my ($t1, $l) = each %list_modules::l) {
-	while (my ($t2, $l) = each %$l) {
-	    ref $l or die "bad $l in $t1/$t2";
-	    foreach (@$l) {
-		$listed{$_} = "$t1/$t2"; 
-	    }
-	}
-    }
-
-    my %module2category;
-    my %deprecated_modules = %listed;
-    my $not_listed = sub {
-	my ($msg, $verbose, @l) = @_;
-	my %not_listed;
-	foreach (@l) {
-	    my ($mod) = m|([^/]*)\.k?o(\.gz)?$| or next;
-	    delete $deprecated_modules{$mod};
-	    next if $listed{$mod};
-	    s|.*?mdk(BOOT)?/||;
-	    s|kernel/||; s|drivers/||; s|3rdparty/||;
-	    $_ = dirname $_;
-	    $_ = dirname $_ if $mod eq basename($_);
-	    $module2category{$mod} = $_;
-	    push @{$not_listed{$_}}, $mod;
-	}
-	if ($verbose) {
-	    print "$msg $_: ", join(" ", @{$not_listed{$_}}), "\n" foreach sort keys %not_listed;
-	}
-    };
-    $not_listed->('NOT LISTED', 1, `cd all.kernels/2.6* ; find -name "*.k?o" -o -name "*.k?o.gz"`);
-    $not_listed->('not listed', $verbose, `rpm -qpl /RPMS/kernel-2.6*`);
-    if (%deprecated_modules) {
-	my %per_cat;
-	push @{$per_cat{$listed{$_}}}, $_ foreach keys %deprecated_modules;
-	foreach my $cat (sort keys %per_cat) {
-	    print "bad/old modules ($cat) : ", join(" ", sort @{$per_cat{$cat}}), "\n";
-	}
-    }
-
-    {
-	require '/usr/bin/merge2pcitable.pl';
-	my $pcitable = read_pcitable("/usr/share/ldetect-lst/pcitable");
-	my $usbtable = read_pcitable("/usr/share/ldetect-lst/usbtable");
-
-	my @l1 = uniq grep { !/:/ && $_ ne 'unknown' } map { $_->[0] } values %$pcitable;
-	if (my @l = difference2(\@l1, [ keys %listed ])) {
-	    my %not_listed;
-	    push @{$not_listed{$module2category{$_}}}, $_ foreach @l;
-	    if (my $l = delete $not_listed{''}) {
-		print "bad/old pcitable modules : ", join(" ", @$l), "\n";
-	    }
-	    print STDERR "PCITABLE MODULES NOT LISTED $_: ", join(" ", sort @{$not_listed{$_}}), "\n" foreach sort keys %not_listed;
-	    #$error = 1;
-	}
-
-	my @l2 = uniq grep { !/:/ && $_ ne 'unknown' } map { $_->[0] } values %$usbtable;
-	if (my @l = difference2(\@l2, [ keys %listed ])) {
-	    my %not_listed;
-	    push @{$not_listed{$module2category{$_}}}, $_ foreach @l;
-	    print STDERR "usbtable modules not listed $_: ", join(" ", sort @{$not_listed{$_}}), "\n" foreach sort keys %not_listed;
-	}
-    }
-
-    exit $error;
-}
diff --git a/kernel/strip_modules b/kernel/strip_modules
deleted file mode 100755
index cd4077a66..000000000
--- a/kernel/strip_modules
+++ /dev/null
@@ -1,129 +0,0 @@
-#!/bin/sh
-#
-#	Given a list of objects, strip all static symbols except those
-#	required by insmod.
-#
-#	Copyright Keith Owens <kaos@ocs.com.au>.  GPL.
-#	Sat Feb  1 12:52:17 EST 1997
-#	
-#	Mainly intended for reducing the size of modules to save space
-#	on emergency and install disks.  Be aware that removing the
-#	static symbols reduces the amount of diagnostic information
-#	available for oops.  Not recommended for normal module usage.
-#
-#	This code requires the modules use MODULE_PARM and EXPORT_.
-#	Do not strip modules that have not been converted to use
-#	MODULE_PARM or are using the old method of exporting symbols.
-#	In particular do not use on modules prior to 2.1.20 (approx).
-#
-#	The objects are stripped in /tmp, only if the strip works is
-#	the original overwritten.  If the command line to strip the
-#	symbols becomes too long, the strip is done in multiple passes.
-#	Running strip_module twice on the same object is safe (and a
-#	waste of time).
-#
-
-sizeofptr="/tmp/$$.sizeofptr"
-echo 'int main() { return sizeof(void *); }' | gcc -xc - -o $sizeofptr
-$sizeofptr
-export SIZEOF_POINTER=$?
-rm -f $sizeofptr
-
-cat > /tmp/$$.awk <<\EOF
-BEGIN	{
-	strip = "/usr/bin/objcopy";
-	nm = "/usr/bin/nm";
-	cp = "/bin/cp";
-	mv = "/bin/mv";
-	rm = "/bin/rm";
-	tmp = "/tmp";
-	command_size = 400;	# arbitrary but safe
-
-	getline < "/proc/self/stat";
-	pid = $1;
-	tmpcopy = tmp "/" pid ".object";
-	nmout = tmp "/" pid ".nmout";
-
-	for (i = 1; i < ARGC; ++i)
-		strip_module(ARGV[i]);
-
-	do_command(rm " -f " tmpcopy " " nmout);
-
-	exit(0);
-}
-
-function strip_module(object,
-	keep_symbol, to_strip, symbol, command, changed) {
-	do_command(cp " -a " object " " tmpcopy);
-	do_command(nm " " tmpcopy " > " nmout);
-	# delete array_name sometimes breaks, internal error, play safe
-	for (symbol in keep_symbol)
-		delete keep_symbol[symbol];
-	for (symbol in to_strip)
-		delete to_strip[symbol];
-	new_module_format = 0;
-	ptrskip = 2 + 2 * ENVIRON["SIZEOF_POINTER"];
-	while ((getline < nmout) > 0) {
-		$0 = substr($0, ptrskip);
-		# b static variable, uninitialised
-		# d static variable, initialised
-		# r static array, initialised
-		# t static label/procedures
-		if ($1 ~ /[bdrt]/)
-			to_strip[$2] = "";
-		else if ($2 ~ /R __ksymtab_/)
-			keep_symbol[substr($2, 11)] = "";
-		else if ($0 ~ /R __module_parm_/)
-			keep_symbol[substr($2, 15)] = "";
-		else if ($0 ~ /D __parm_/)
-			keep_symbol[substr($2, 8)] = "";
-		else if ($3 ~ /__ksymtab/) {
-			keep_symbol[$5] = "";
-		}
-		else if ($1 != "?")
-			keep_symbol[$2] = "";
-		if ($2 ~ /__module/)
-			new_module_format = 1;
-	}
-	close(nmout);
-	command = "";
-	changed = 0;
-	failure = 0;
-	if (new_module_format) {
-		for (symbol in to_strip) {
-			if (!(symbol in keep_symbol)) {
-				changed = 1;
-				if (length(command) > command_size) {
-					failure = failure || do_command(strip command " " tmpcopy);
-					command = "";
-				}
-				command = command " --strip-symbol=" symbol;
-			}
-		}
-	}
-	if (command != "") {
-		changed = 1;
-		failure = failure || do_command(strip command " " tmpcopy);
-	}
-	if (changed && !failure)
-		do_command(mv " " tmpcopy " " object);
-}
-
-function do_command(command) {
-	if ((ret = system(command)) != 0) {
-		giveup("command \"" command "\" failed " ret, ret);
-		return 1;
-	}
-	return 0;
-}
-
-function giveup(message, ret) {
-	print "strip_module: " message > "/dev/stderr";
-#	exit(ret);
-}
-EOF
-
-awk -f /tmp/$$.awk "$@"
-ret=$?
-rm -f /tmp/$$.awk
-exit $ret
diff --git a/kernel/update_kernel b/kernel/update_kernel
deleted file mode 100755
index a32878339..000000000
--- a/kernel/update_kernel
+++ /dev/null
@@ -1,118 +0,0 @@
-#!/usr/bin/perl
-
-# this script takes kernels rpms from RPMS/ and create various files in all_kernels/
-# for each rpms in RPMS, it does:
-#   RPMS/kernel-VER-*.rpm -> 
-#     all.kernels/VER/all_modules.tar  (used for all.rdz)
-#     all.kernels/VER/*.mar            (used for other rdz)
-#     all.kernels/VER/modules.cz       (used for stage2)
-#     all.kernels/VER/modules.dep
-#     all.kernels/VER/vmlinuz
-#
-# if RPMS is empty, this script tries to find kernels in $main_repository
-
-use MDK::Common;
-use list_modules;
-
-my $main_repository = '/export/media/main';
-my $rpm = 'rpm --nosignature';
-
-
-my $MOVE = $ARGV[0] eq '--move' && shift;
-
-@ARGV <= 1 or die "usage: ./update_kernel [--move] [<kernel rpm>]\n";
-
-eval { rm_rf('all.kernels') }; #- remove old things
-mkdir 'all.kernels';
-
-my $main = chomp_(cat_('RPMS/.main'));
-my $main_BOOT = chomp_(cat_('RPMS/.main-BOOT'));
-
-if (@ARGV) {
-    install_kernel($ARGV[0]);
-} elsif (! -d 'RPMS') {
-    update_kernel_from_repository($main_repository, '2.6', 0);
-    update_kernel_from_repository($main_repository, '2.6', 1);
-    install_kernel(glob("$main_repository/kernel-xbox*"), 1) if arch() =~ /i.86/;
-}
-
-extract_kernel($_) foreach glob("RPMS/*.rpm");
-
-sub system_verbose { print join(' ', @_), "\n"; system(@_) }
-sub sys { &system_verbose; $? and die }
-
-sub rpm2version {
-    my ($kernel_rpm) = @_;
-    `$rpm -qpl $kernel_rpm` =~ m!/boot/vmlinuz-(.*)! && $1 or die "can't find vmlinuz in $kernel_rpm\n";
-}
-
-sub update_kernel_from_repository {
-    my ($repository, $main_ver, $is_BOOT) = @_;
-    my $rpm_wildcard = 'kernel-' . ($is_BOOT ? 'BOOT-' : (arch() =~ /i.86/ ? 'i586-up-1GB-' : '')) . $main_ver . '*.rpm';
-    my @kernels = glob("$repository/$rpm_wildcard");
-    
-    install_kernel($_, 1) foreach @kernels;
-}
-
-sub install_kernel {
-    my ($kernel_rpm) = @_;
-    my $basename = basename($kernel_rpm);
-    warn "Installing rpm $basename in RPMS\n";
-    mkdir 'RPMS';
-    cp_af($kernel_rpm, "RPMS/$basename");
-
-    if (!$main) {
-	$main = rpm2version($kernel_rpm);
-	output('RPMS/.main', "$main\n");
-    }
-    if (!$main_BOOT && $kernel_rpm =~ /BOOT/) {
-	$main_BOOT = rpm2version($kernel_rpm);
-	output('RPMS/.main-BOOT', "$main_BOOT\n");
-    }
-}
-
-sub extract_kernel {
-    my ($kernel_rpm) = @_;
-
-    my $kern_ver = rpm2version($kernel_rpm);
-    my $dir = "all.kernels/$kern_ver";
-
-    warn "Extracting kernel $kern_ver\n";
-
-    eval { rm_rf($dir) };
-    mkdir_p("$dir/modules");
-    sys("rpm2cpio $kernel_rpm | (cd $dir ; cpio -id)");
-
-    rename "$dir/boot/vmlinuz-$kern_ver", "$dir/vmlinuz" or die "can't find vmlinuz\n";
-
-    sys("find $dir -name '*.gz' | xargs gunzip");
-
-    my $ext = module_extension($kern_ver);
-
-    open(my $F, "find $dir -name '*.$ext' |");
-    my $file; while ($file = <$F>) {
-	chomp($file);
-	rename $file, "$dir/modules/" . basename($file) or warn "conflict for $file\n";
-    }
-
-    if (kernel_is_26($kern_ver)) {
-        warn "no stripping on 2.6 since it breaks modules\n";
-    } else {
-        print STDERR "stripping $kern_ver: ";
-        sys("./strip_modules $dir/modules/*.$ext");
-        print STDERR "done\n";
-    }
-
-    sys('perl', 'modules.pl', 'remove_unneeded_modules', $kern_ver) if $kern_ver !~ /BOOT/;
-
-    sys('perl', 'modules.pl', 'make_modules_per_image', $kern_ver);
-    sys('perl', 'modules.pl', 'make_modules_description', $kern_ver) if $kern_ver eq $main;
-
-    if (!$MOVE) {
-        print STDERR "packdrake $kern_ver: ";
-        sys("cd $dir/modules ; ls *.$ext | packdrake -b9s ../modules.cz 400000");
-        print STDERR "done\n";
-    }
-
-    eval { rm_rf("$dir$_") } foreach qw(/boot /lib /usr /modules);
-}
diff --git a/make_boot_img b/make_boot_img
deleted file mode 100755
index a1e46bbf7..000000000
--- a/make_boot_img
+++ /dev/null
@@ -1,843 +0,0 @@
-#!/usr/bin/perl
-
-use Config;
-use MDK::Common;
-Config->import;
-my ($arch) = $Config{archname} =~ /(.*?)-/;
-
-my $default_append = "ramdisk_size=128000";
-# full acpi support for x86_64, enough acpi support for x86 ht, no acpi for others
-my $default_acpi = $arch =~ /i.86/ ? "acpi=ht" : $arch =~ /x86_64/ ? "" : "acpi=off";
-my $default_vga = "vga=788 splash=silent";
-my $timeout = 150;
-
-my $instdir = "mdk-stage1";
-my $tmp_mnt = '/tmp/drakx_mnt';
-my $tmp_mnt_initrd = '/tmp/drakx_mnt2';
-
-my $sudo;
-if ($>) {
-    $sudo = "sudo";
-    $ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-}
-
-sub __ { print @_, "\n"; system(@_) }
-sub _ { __ @_; $? and die }
-sub mke2fs { 
-    my ($f) = @_;
-    _ "/sbin/mke2fs -q -m 0 -F -s 1 $f";
-    _ "/sbin/tune2fs -c 0 -U clear -T 1970010101 $f";
-}
-
-_ "$sudo mkdir -p $tmp_mnt $tmp_mnt_initrd";
-mkdir "images";
-
-my $main = chomp_(cat_('kernel/RPMS/.main'));
-my $main_BOOT = chomp_(cat_('kernel/RPMS/.main-BOOT'));
-my @kernels = grep { !/xbox/ } all('kernel/all.kernels');
-my @kernels_BOOT = grep { /BOOT/ } @kernels;
-
-my @all_images = (
-		  if_($arch =~ /i.86|x86_64/, 'cdrom.img', 'cdrom-changedisk.img', 'pcmcia.img', 'isolinux', 'boot.iso', 'all.img', 'hd_grub.img', 'network.img', 'network_drivers.img'),
-		  if_($arch =~ /ia64/, 'all.img'),
-		  if_($arch =~ /ppc/, 'all.img'),
-		 );
-
-my @images = @ARGV ? @ARGV : map { "images/$_" } @all_images;
-
-if (any { /move/ } @images) {
-    -e "$instdir/init-move" or die "ERROR: $instdir not built for move\n";
-} else {
-    -e "$instdir/init-move" and die "ERROR: $instdir built for move\n";
-}
-
-foreach my $img (@images) {
-    my ($type, $I, $extension) = $img =~ m!([^/]*)(64)?\.([^.]*)$!;
-
-    if ($img =~ /hd_grub/) {
-	hd_grub($img);
-    } elsif ($img =~ /isolinux/) {
-	isolinux($main, @kernels);
-
-	if (my ($tftpboot) = grep { -e $_ } qw(/tftpboot /var/lib/tftpboot)) {
-	    system("/bin/cp -f isolinux/alt0/* $tftpboot");
-	}
-    } elsif ($img =~ /move/) {
-	isolinux_move($main);
-
-	if (my ($tftpboot) = grep { -e $_ } qw(/tftpboot /var/lib/tftpboot)) {
-	    system("/bin/cp -f move/isolinux/* $tftpboot/move 2>/dev/null");
-	}
-    } elsif ($img =~ /boot.iso/) {
-	boot_iso($img, \@kernels);
-    } elsif ($img =~ /drivers/) {
-	drivers($type, $I, "$img-$_") foreach @kernels_BOOT;
-	rename("$img-$main_BOOT", $img);
-    } elsif ($extension eq 'rdz') {
-	initrd($tmp_mnt_initrd, $type, $I, "$img-$_") foreach @kernels;
-    } elsif ($extension eq 'img') {
-	print STDERR "calling boot_img_$arch for $img\n";
-	$::{"boot_img_$arch"}->($type, $I, "$img-$_", "kernel/all.kernels/$_/vmlinuz") foreach $type eq 'all' ? @kernels : @kernels_BOOT;
-	rename("$img-$main", $img) or rename("$img-$main_BOOT", $img);
-    } else {
-	die "unknown image $img";
-    }
-}
-
-sub syslinux_color {
-    "0" . {
-	default => '7',
-	blue    => '9',
-	green   => 'a',
-	red     => 'c',
-	yellow  => 'e',
-	white   => 'f',
-    }->{$_[0]} || die "unknown color $_[0]\n";
-}
-
-sub syslinux_msg { 
-    my ($msg_xml_file, @more_text) = @_;
-
-    require XML::Parser;
-
-    sub xml_tree2syslinux {
-	my ($current_color, $tree) = @_;
-	my (undef, @l) = @$tree;
-	join('', map {
-	    my ($type, $val) = @$_;
-	    if ($type eq '0') {
-		$val;
-	    } else {
-		syslinux_color($type) . xml_tree2syslinux($type, $val) . syslinux_color($current_color);
-	    }
-	} group_by2(@l));
-    }
-
-    print "parsing $msg_xml_file\n";
-    my $tree = XML::Parser->new(Style => 'Tree')->parsefile($msg_xml_file);
-    $tree->[0] eq 'document' or die "bad file $msg_xml_file\n";
-    my $text = xml_tree2syslinux('default', $tree->[1]);
-
-    pack("C*", 0x0E, 0x80, 0x03, 0x00) . ""
-      . $text . join('', @more_text)
-      . "\n" . syslinux_color('red') . "[F1-Help] [F2-Advanced Help] [F3-Main]" . syslinux_color('default') . "\n";
-}
-
-sub syslinux_cfg {
-    my (@entries) = @_;
-
-    my $header = <<EOF;
-default linux
-prompt 1
-timeout $timeout
-display boot.msg
-F1 help.msg
-F2 advanced.msg
-F3 boot.msg
-EOF
-
-    my @l = map {
-	"label $_->{label}\n" .
-	"  kernel $_->{kernel}\n" .
-	($_->{initrd} ? "  append initrd=$_->{initrd} $_->{append}\n" : '');
-    } @entries;
-
-    $header . join('', @l);
-}
-
-sub install_stripped { _ "strip $_[0]"; _ "$sudo install $_[0] $_[1]" }
-
-sub initrd {
-    my ($mnt, $type, $I, $img, $o_raw_stage1_tree_kind) = @_;
-    my $tmp = "$ENV{HOME}/tmp/initrd";
-    my $tar = "$instdir/stage1-data/stage1$o_raw_stage1_tree_kind.tar.bz2";
-
-    __ "$sudo umount $tmp $mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$tmp bs=1k count=" . ($arch =~ /ia64/ || $type eq "all" ? 16384 : 2000);
-    mke2fs($tmp);
-    _ "$sudo mount -t ext2 $tmp $mnt -o loop";
-
-    _ "$sudo tar xjC $mnt -f $tar";
-    symlinkf "/tmp/stage2/lib64", "$mnt/lib64" if $arch =~ /x86_64/;
-
-    {
-	my $install = ${{
-	    network => "stage1-network",
-	    cdrom => "stage1-cdrom",
-	}}{$type} || 'stage1-full';
-	install_stripped("$instdir/init", "$mnt/sbin");
-	install_stripped("$instdir/$install", "$mnt/sbin/stage1");
-    }
-
-    if (member($type, qw(network all))) {
-	install_stripped("$instdir/ppp/pppd-bin", "$mnt/sbin/pppd");
-	install_stripped("$instdir/rp-pppoe/pppoe-bin", "$mnt/sbin/pppoe");
-	_ "$sudo mknod $mnt/dev/ppp c 108 0";
-	_ "$sudo mknod $mnt/dev/ptyp0 c 2 0";
-	_ "$sudo mknod $mnt/dev/ttyp0 c 3 0";
-    }
-
-    if (member($type, qw(pcmcia all network)) && $arch !~ /ppc|ia64/) {
-	 _ "$sudo cp -a /etc/pcmcia $mnt/etc";
-	 _ "cp $mnt/etc/pcmcia/config /tmp/pcmcia_config_tmp";
-	 _ "tools/patch_pcmcia_config.pl /tmp/pcmcia_config_tmp kernel/all.kernels/$main/modules.dep";
-	 _ "sudo mv /tmp/pcmcia_config_tmp $mnt/etc/pcmcia/config";
-    }
-    my ($ext) = $img =~ /rdz-(.*)/ or die "bad initrd name ($img)";
-    my $modz = "kernel/all.kernels$I/$ext";
-    if ($type eq 'all') {
-	__ "$sudo tar xC $mnt/modules -f $modz/${type}_modules.tar";
-    } else {
-	_ "$sudo cp -f $modz/${type}_modules.mar $mnt/modules/modules$I.mar";
-    }
-    _ "$sudo cp -f $modz/modules.dep $mnt/modules/";
-    _ "$sudo cp -f /sbin/sash $mnt/tmp/sh" if $type eq 'all' && $ENV{DEBUGSTAGE1};
-    _ "$sudo umount $mnt";
-
-# Workaround for vfat-loop bug (quite touchy)
-    _ "gzip -9f $tmp";
-    _ "cp -f $tmp.gz $img";
-    _ "rm -f $tmp.gz";
-#    _ "gzip -9 -c $tmp > $img";
-#    _ "rm -f $tmp";
-}
-
-sub entries_append {
-    my ($type) = @_;
-
-    my $automatic = $type =~ /cdrom/ ? 'automatic=method:cdrom ' : '';
-    $automatic .= 'changedisk ' if $type =~ /changedisk/;
-
-    my @simple_entries = (
-	linux => $default_vga,
-	vgalo => "vga=785",
-	vgahi => "vga=791",
-	vga16 => "vga16",
-	text => "text",
-	patch => "patch $default_vga",
-	rescue => "rescue",
-    );
-    my @entries = (
-        (map { $_->[0] => "$automatic$default_acpi $_->[1]" } group_by2(@simple_entries)),
-	acpi => "$automatic$default_vga",
-    );
-
-    map { { label => $_->[0], append => "$default_append $_->[1]" } }
-      group_by2(@entries);
-}
-
-sub syslinux_cfg_all {
-    my ($type) = @_;
-
-    syslinux_cfg(
-	(map {
-	    { kernel => 'alt0/vmlinuz', initrd => 'alt0/all.rdz', %$_ };
-	} entries_append($type)),
-	(map_index {
-	    { label => "alt$::i", kernel => "alt$::i/vmlinuz", initrd => "alt$::i/all.rdz", 
-	      append => "$default_append $default_acpi $default_vga" };
-	} @kernels),
-	{ label => 'memtest', kernel => 'test/memtest.bin' },
-    );
-}
-sub remove_ending_zero {
-    my ($img) = @_;
-    _(q(perl -0777 -pi -e 's/\0+$//' ) . $img);
-}
-
-sub boot_img_i386 {
-    my ($type, $I, $img, $kernel) = @_;
-
-    __ "$sudo umount $tmp_mnt 2>/dev/null";
-
-    _ "dd if=/dev/zero of=$img bs=1k count=" . ($type eq 'all' ? 7000 : 1440);
-    my $mk_options = $type eq 'all' ? '' : '-f 1 -r 16 -s 2'; # keep the FAT bookkeeping as small as possible
-    _ "mkdosfs $mk_options $img";
-    _ "$sudo syslinux-graphic $img";
-
-    _ "$sudo mount -t vfat -o umask=0 $img $tmp_mnt -o loop";
-    _ "cat $kernel > $tmp_mnt/vmlinuz";
-    _ "lilo-bmp2mdk file:isolinux-graphic" . ($type eq 'all' ? '' : '-simple') . ".bmp >$tmp_mnt/boot.msg";
-
-    output("$tmp_mnt/help.msg", syslinux_msg('help.msg.xml'));
-    output("$tmp_mnt/advanced.msg", syslinux_msg('advanced.msg.xml'));
-
-    (my $rdz = $img) =~ s/\.img/.rdz/;
-    (my $initrd_type = $type) =~ s/-changedisk//;
-    initrd($tmp_mnt_initrd, $initrd_type, $I, $rdz);
-    my $short_type = substr($type, 0, 8);
-
-    output("$tmp_mnt/syslinux.cfg", 
-	   syslinux_cfg(map {
-			    { kernel => 'vmlinuz', initrd => "$short_type.rdz", %$_ };
-			} entries_append($type)));
-
-    eval { _ "cp -f $rdz $tmp_mnt/$short_type.rdz" };
-    if ($@) {
-	#- argh not enough room, try to suggest how to solve this
-	unlink "$tmp_mnt/$short_type.rdz";
-	my $avail = (split ' ', `df $tmp_mnt`)[-3];
-	my $s = int((-s $rdz) / 1024);
-
-	my ($ext) = $img =~ /\.img-(.*)/ or die "bad initrd name ($img)";
-	my $dir = "kernel/all.kernels/$ext";
-	my $pcitable = cat_('/usr/share/ldetect-lst/pcitable');
-	my @l = sort { $a <=> $b } map {
-	    my ($name) = /(\S+)\.k?o$/ or die "bad file in .mar";
-	    my $gz_size = chomp_(`tar xOf $dir/all_modules.tar $_ | gzip | wc -c`);
-	    sprintf "%7d  %6d      %s\n", $gz_size, listlength($pcitable =~ /"$name"/g), $name;
-	} split(' ', `mdk-stage1/mar/mar -l $dir/${initrd_type}_modules.mar`);
-	output('.not-enough-room', "gz size - pcitable - name\n", @l);
-
-	warn sprintf("not enough room for $rdz: need %dKB (available %dKB < needed %dKB)\n", $s - $avail, $avail, $s);
-	die qq(check file ".not-enough-room" to see modules size and pcitable usage\n);
-    }
-    unlink $rdz;
-
-    _ "sync";
-    _ "df $tmp_mnt";
-    _ "$sudo umount $tmp_mnt";
-}
-
-# alias to x86 variant, slightly bigger with images though
-sub boot_img_x86_64 { &boot_img_i386 }
-
-sub boot_img_alpha {
-    my ($type, $I, $img) = @_;
-
-    __ "$sudo umount $tmp_mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$img bs=1k count=1440";
-    mke2fs($img);
-    _ "/sbin/e2writeboot $img /boot/bootlx";
-    _ "$sudo mount -t ext2 $img $tmp_mnt -o loop";
-    _ "cp -f vmlinux.gz $tmp_mnt";
-    -f "$type.rdz" ? _ "cp -f $type.rdz $tmp_mnt" : initrd($tmp_mnt_initrd, $type, $I, "$tmp_mnt/$type.rdz");
-
-    mkdir "$tmp_mnt/etc", 0777;
-    output("$tmp_mnt/etc/aboot.conf", 
-"0:vmlinux.gz initrd=$type.rdz rw $default_append $type
-1:vmlinux.gz initrd=$type.rdz rw $default_append text $type
-");
-    _ "sync";
-    _ "df $tmp_mnt";
-}
-
-sub boot_img_ia64 {
-    my ($type, $_I, $img, $kernel) = @_;
-	my $rdz = $img; $rdz =~ s/\.img/.rdz/;
-
-    __ "$sudo umount $tmp_mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$img bs=1k count=16384";
-    _ "mkdosfs $img";
-    _ "$sudo mount -t vfat $img $tmp_mnt -o loop,umask=000";
-    _ "$sudo cp -f $kernel $tmp_mnt/vmlinux";
-    _ "cp -f $rdz $tmp_mnt/$type.rdz";
-    _ "$sudo cp -f tools/ia64/elilo.efi $tmp_mnt";
-	output("$tmp_mnt/elilo.conf", qq(
-prompt
-timeout=50
-
-image=vmlinux
-        label=linux
-        initrd=$type.rdz
-        append=" ramdisk_size=120000"
-        read-only
-
-image=vmlinux
-        label=rescue
-        initrd=$type.rdz
-        append=" rescue ramdisk_size=120000"
-"));
-    _ "sync";
-    _ "df $tmp_mnt";
-
-}
-
-sub boot_img_sparc {
-    my ($type, $I, $_img) = @_;
-    if ($type =~ /^live(.*)/) {
-	#- hack to produce directly into /export the needed file for cdrom boot.
-	my $dir = "/export";
-	my $boot = "boot"; #- non-absolute pathname only!
-
-	_ "mkdir -p $dir/$boot";
-	_ "cp -f /boot/cd.b /boot/second.b $dir/$boot";
-	_ "cp -f vmlinux$1 $dir/$boot/vmlinux$1";
-	-f "live$1.rdz" ? _ "cp -f live$1.rdz $dir/$boot" : initrd($tmp_mnt_initrd, $type, $I, "$dir/$boot/live$1.rdz");
-
-	output("$dir/$boot/silo.conf", qq(
-partition=1
-default=linux
-timeout=100
-read-write
-message=/$boot/boot.msg
-image="cat /$boot/boot.msg"
-  label=1
-  single-key
-image="cat /$boot/general.msg"
-  label=2
-  single-key
-image="cat /$boot/expert.msg"
-  label=3
-  single-key
-image="cat /$boot/rescue.msg"
-  label=4
-  single-key
-image="cat /$boot/kickit.msg"
-  label=5
-  single-key
-image="cat /$boot/param.msg"
-  label=6
-  single-key
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=linux
-  alias=install
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=text
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 text"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=expert
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 expert"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=ks
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 ks"
-image[sun4c,sun4d,sun4m]=/$boot/vmlinux
-  label=rescue
-  initrd=/$boot/live.rdz
-  append="ramdisk_size=128000 rescue"
-image[sun4u]=/$boot/vmlinux64
-  label=linux
-  alias=install
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000"
-image[sun4u]=/$boot/vmlinux64
-  label=text
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 text"
-image[sun4u]=/$boot/vmlinux64
-  label=expert
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 expert"
-image[sun4u]=/$boot/vmlinux64
-  label=ks
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 ks"
-image[sun4u]=/$boot/vmlinux64
-  label=rescue
-  initrd=/$boot/live64.rdz
-  append="ramdisk_size=128000 rescue"
-"));
-
-	output("$dir/$boot/README", "
-To Build a Bootable CD-ROM, try:
-  mkisofs -R -o t.iso -s /$boot/silo.conf /export
-");
-    } elsif ($type =~ /^tftprd(.*)/) {
-	my $dir = "/export";
-	my $boot = "images";
-	my $setarch = $1 ? "sparc64" : "sparc32";
-
-	_ "mkdir -p $dir/$boot";
-	-f "$type.rdz" or initrd($tmp_mnt_initrd, $type, $I, "$type.rdz");
-	_ "cp -f vmlinux$1.aout $dir/$boot/$type.img";
-	_ "$setarch kernel$1/src/arch/sparc$1/boot/piggyback $dir/$boot/$type.img kernel$1/boot/System.map $type.rdz";
-    } elsif ($type =~ /^tftp(.*)/) {
-	my $dir = "/export";
-	my $boot = "images";
-
-	_ "mkdir -p $dir/$boot";
-	_ "cp -f vmlinux$1.aout $dir/$boot/$type.img";
-    } else {
-	my $dir = "floppy";
-	__ "$sudo umount $tmp_mnt 2>/dev/null";
-	_ "rm -rf $dir";
-	_ "mkdir -p $dir";
-	_ "cp -f /boot/fd.b /boot/second.b $dir";
-	_ "cp -f vmlinuz$I $dir/vmlinux$I.gz";
-	-f "$type.rdz" ? _ "cp -f $type.rdz $dir" : initrd($tmp_mnt_initrd, $type, $I, "$dir/$type.rdz");
-
-	output("$dir/boot.msg", "
-Welcome to Mandrakelinux 7.1
-
-Press <Enter> to install or upgrade a system 7mMandrakelinux7m
-");
-
-	output("$dir/silo.conf", qq(
-partition=1
-default=linux
-timeout=100
-read-write
-message=/boot.msg
-image=/vmlinux$I.gz
-  label=linux
-  initrd=/$type.rdz
-  append="ramdisk_size=128000 $type"
-"));
-	_ "genromfs -d $dir -f /dev/ram -A 2048,/.. -a 512 -V 'DrakX boot disk'";
-	_ "$sudo mount -t romfs /dev/ram $tmp_mnt";
-	_ "silo -r $tmp_mnt -F -i /fd.b -b /second.b -C /silo.conf";
-	_ "$sudo umount $tmp_mnt";
-	_ "dd if=/dev/ram of=$type.img bs=1440k count=1";
-	_ "sync";
-	_ "$sudo mount -t romfs /dev/ram $tmp_mnt";
-	_ "df $tmp_mnt";
-    }
-}
-
-sub boot_img_ppc() {
-	#- hack to produce directly into /export the needed file for cdrom boot.
-	my $dir = "/export";
-	my $boot = "boot"; #- non-absolute pathname only!
-    _ "rm -rf $dir/$boot"; mkdir "$dir/$boot", 0777;
-	foreach (glob("kernel/all.kernels/*")) {
-		my $ext = basename($_);
-		if ($ext =~ /power4/) {
-			_ "cp $_/boot/vmlinuz-$ext* $dir/$boot/vmlinux-power4";
-			_ "cp images/all.rdz-$ext $dir/$boot/all-power4.gz";
-		}
-		elsif ($ext =~ /2.6/) {
-			_ "cp $_/boot/vmlinuz-$ext $dir/$boot/vmlinux";
-			_ "cp images/all.rdz-$ext $dir/$boot/all.gz";
-		}
-		elsif ($ext =~ /2.4/) {
-			_ "cp $_/boot/vmlinux $dir/$boot/vmlinux-2.4";
-			_ "cp images/all.rdz-$ext $dir/$boot/all-2.4.gz";
-		}
-    }
-    _ "cp -f /usr/lib/yaboot/yaboot $dir/$boot/yaboot";
-	
-	output("$dir/$boot/ofboot.b", '<CHRP-BOOT>
-<COMPATIBLE>
-MacRISC
-</COMPATIBLE>
-<DESCRIPTION>
-Mandrakelinux PPC bootloader
-</DESCRIPTION>
-<BOOT-SCRIPT>
-" screen" output
-load-base release-load-area
-dev screen
-" "(0000000000aa00aa0000aaaaaa0000aa00aaaa5500aaaaaa)" drop 0 8 set-colors
-" "(5555555555ff55ff5555ffffff5555ff55ffffff55ffffff)" drop 8 8 set-colors
-device-end
-3 to foreground-color
-0 to background-color
-" "(0C)" fb8-write drop
-" Booting Mandrakelinux PPC..." fb8-write drop 100 ms
-boot cd:,\boot\yaboot
-</BOOT-SCRIPT>
-<OS-BADGE-ICONS>
-1010
-000000000000F8FEACF6000000000000
-0000000000F5FFFFFEFEF50000000000
-00000000002BFAFEFAFCF70000000000
-0000000000F65D5857812B0000000000
-0000000000F5350B2F88560000000000
-0000000000F6335708F8FE0000000000
-00000000005600F600F5FD8100000000
-00000000F9F8000000F5FAFFF8000000
-000000008100F5F50000F6FEFE000000
-000000F8F700F500F50000FCFFF70000
-00000088F70000F50000F5FCFF2B0000
-0000002F582A00F5000008ADE02C0000
-00090B0A35A62B0000002D3B350A0000
-000A0A0B0B3BF60000505E0B0A0B0A00
-002E350B0B2F87FAFCF45F0B2E090000
-00000007335FF82BF72B575907000000
-000000000000ACFFFF81000000000000
-000000000081FFFFFFFF810000000000
-0000000000FBFFFFFFFFAC0000000000
-000000000081DFDFDFFFFB0000000000
-000000000081DD5F83FFFD0000000000
-000000000081DDDF5EACFF0000000000
-0000000000FDF981F981FFFF00000000
-00000000FFACF9F9F981FFFFAC000000
-00000000FFF98181F9F981FFFF000000
-000000ACACF981F981F9F9FFFFAC0000
-000000FFACF9F981F9F981FFFFFB0000
-00000083DFFBF981F9F95EFFFFFC0000
-005F5F5FDDFFFBF9F9F983DDDD5F0000
-005F5F5F5FDD81F9F9E7DF5F5F5F5F00
-0083DD5F5F83FFFFFFFFDF5F835F0000
-000000FBDDDFACFBACFBDFDFFB000000
-000000000000FFFFFFFF000000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFF0000000000
-0000000000FFFFFFFFFFFFFF00000000
-00000000FFFFFFFFFFFFFFFFFF000000
-00000000FFFFFFFFFFFFFFFFFF000000
-000000FFFFFFFFFFFFFFFFFFFFFF0000
-000000FFFFFFFFFFFFFFFFFFFFFF0000
-000000FFFFFFFFFFFFFFFFFFFFFF0000
-00FFFFFFFFFFFFFFFFFFFFFFFFFF0000
-00FFFFFFFFFFFFFFFFFFFFFFFFFFFF00
-00FFFFFFFFFFFFFFFFFFFFFFFFFF0000
-000000FFFFFFFFFFFFFFFFFFFF000000
-</OS-BADGE-ICONS>
-</CHRP-BOOT>
-');
-
-	output("$dir/$boot/yaboot.conf", '
-init-message = "\nWelcome to Mandrakelinux PPC!\nHit <TAB> for boot options.\n\n"
-timeout = 150
-device=cd:
-default = install-gui
-message=/boot/yaboot.msg
-
-image = /boot/vmlinux
-    label = install-gui
-    initrd = /boot/all.gz
-    initrd-size = 34000
-    append = " ramdisk_size=128000"
-
-image = /boot/vmlinux-power4
-    label = install-gui-power4
-    initrd = /boot/all-power4.gz
-    initrd-size = 34000
-    append = " ramdisk_size=128000"
-
-image = /boot/vmlinux
-    label = install-text
-    initrd = /boot/all.gz
-    initrd-size = 34000
-    append = " text ramdisk_size=128000"
-
-image = /boot/vmlinux-power4
-    label = install-text-power4
-    initrd = /boot/all-power4.gz
-    initrd-size = 34000
-    append = " text ramdisk_size=128000"
-
-image = /boot/vmlinux
-    label = install-gui-old
-    initrd = /boot/all.gz
-    initrd-size = 34000
-    append = " gui-old ramdisk_size=128000"
-
-image = /boot/vmlinux-power4
-    label = install-gui-old-power4
-    initrd = /boot/all-power4.gz
-    initrd-size = 34000
-    append = " gui-old ramdisk_size=128000"
-
-image = enet:0,vmlinux
-    label = install-net
-    initrd = enet:0,all.gz
-    initrd-size = 34000
-    append = " ramdisk_size=128000"
-
-image = enet:0,vmlinux-power4
-    label = install-net-power4
-    initrd = enet:0,all-power4.gz
-    initrd-size = 34000
-    append = " ramdisk_size=128000"
-
-image = enet:0,vmlinux
-    label = install-net-text
-    initrd = enet:0,all.gz
-    initrd-size = 34000
-    append = " text ramdisk_size=128000"
-
-image = enet:0,vmlinux-power4
-    label = install-net-text-power4
-    initrd = enet:0,all-power4.gz
-    initrd-size = 34000
-    append = " text ramdisk_size=128000"
-
-image = /boot/vmlinux
-    label = rescue
-    initrd = /boot/all.gz
-    initrd-size = 34000
-    append = " rescue ramdisk_size=128000"
-
-image = /boot/vmlinux-power4
-    label = rescue-power4
-    initrd = /boot/all-power4.gz
-    initrd-size = 34000
-    append = " rescue ramdisk_size=128000"
-
-image = enet:0,vmlinux
-    label = rescue-net
-    initrd = enet:0,all.gz
-    initrd-size = 34000
-    append = " rescue ramdisk_size=128000" 
-
-image = enet:0,vmlinux-power4
-    label = rescue-net-power4
-    initrd = enet:0,all-power4.gz
-    initrd-size = 34000
-    append = " rescue ramdisk_size=128000" 
-');
-
-	output("$dir/$boot/yaboot.msg", '
-Thanks for choosing Mandrakelinux PPC.  The following is a short
-explanation of the various options for booting the install CD.
-
-All options ending with "-power4" use the BOOT kernel for ppc 9xx and POWER4.
-The default syntax with no suffix uses the BOOT kernel for ppc 6xx 7xx and 7xxx.
-The default if you just hit enter is "install-gui".
-
-install-gui:        	uses Xorg fbdev mode
-install-text:       	text based install
-install-net:            allows you to use a minimal boot CD,
-                        pulling the rest of the install from
-                        a network server
-install-net-text:       text mode network install
-rescue:                 boots the rescue image
-rescue-net:             boots the rescue image from a network server
-
-');
-
-}
-
-sub VERSION {
-    my ($kernels) = @_;
-
-    map { "$_\n" }
-      $ENV{DISTRIB_DESCR},
-      scalar gmtime(),
-      '', @$kernels;
-}
-
-sub syslinux_all_files {
-    my ($dir, $kernels) = @_;
-
-    eval { rm_rf($dir) }; mkdir_p($dir);
-
-    @$kernels or die "syslinux_all_files: no kernel\n";
-
-    $default_vga =~ /788/ or die 'we rely on vga=788 for bootsplash';
-    my $bootspash_cfg = '/etc/bootsplash/themes/Mandrakelinux/config/bootsplash-800x600.cfg';
-    -e $bootspash_cfg or die "can't find $bootspash_cfg";
-
-    each_index {
-	mkdir "$dir/alt$::i", 0777;
-	_ "cp kernel/all.kernels/$_/vmlinuz $dir/alt$::i";
-	initrd($tmp_mnt_initrd, 'all', '', "images/all.rdz-$_");
-	_ "splash -s -f $bootspash_cfg >> images/all.rdz-$_" if !/BOOT/;
-	rename("images/all.rdz-$_", "$dir/alt$::i/all.rdz");
-    } @$kernels;
-
-    _ "lilo-bmp2mdk file:isolinux-graphic.bmp >$dir/boot.msg";
-
-    _ "install -m 644 -D /boot/memtest* $dir/test/memtest.bin";
-
-    output("$dir/help.msg", syslinux_msg('help.msg.xml'));
-    output("$dir/advanced.msg", syslinux_msg('advanced.msg.xml', 
-					     "\nYou can choose the following kernels :\n",
-					     map_index { " o  " . syslinux_color('white') . "alt$::i" . syslinux_color('default') . " is kernel $_\n" } @$kernels));
-}
-
-sub isolinux {
-    my ($main, @kernels) = @_;
-    @kernels = ($main, grep { $_ ne $main } @kernels);
-
-    syslinux_all_files('isolinux', \@kernels);
-
-    _ "cp /usr/lib/syslinux/isolinux.bin isolinux/isolinux.bin";
-    output("isolinux/isolinux.cfg", syslinux_cfg_all('cdrom'));
-}
-
-sub boot_iso {
-    my ($iso, $kernels) = @_;
-
-    syslinux_all_files('.boot_iso/isolinux', $kernels);
-
-    output('.boot_iso/VERSION', VERSION($kernels));	   
-   
-    _ "cp /usr/lib/syslinux/isolinux.bin .boot_iso/isolinux/isolinux.bin";
-    output('.boot_iso/isolinux/isolinux.cfg', syslinux_cfg_all(''));
-
-    _ "mkisofs -r -f -J -cache-inodes -V 'Mdk Boot ISO' -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o $iso .boot_iso";
-    rm_rf('.boot_iso');
-}
-
-sub isolinux_move {   
-    my ($main) = @_;
-
-    _ "cp kernel/all.kernels/$main/vmlinuz move/isolinux";
-    initrd($tmp_mnt_initrd, 'all', '', "move/isolinux/all.rdz-$main", '-with-busybox');
-    rename "move/isolinux/all.rdz-$main", "move/isolinux/all.rdz";
-
-    _ "lilo-bmp2mdk file:move/data/isolinux-graphic.bmp >move/isolinux/boot.msg";
-    _ "cp /usr/lib/syslinux/isolinux.bin move/isolinux/isolinux.bin";
-}
-
-sub hd_grub {
-    my ($img) = @_;
-    my $mapfile = '/tmp/device.map.tmp';
-
-    my @grub_files = map { "/boot/grub/$_" } qw(stage1 stage2);
-    my $size = 40_000 + sum(map { -s $_ } @grub_files);
-
-    __ "$sudo umount $tmp_mnt 2>/dev/null";
-    _ "dd if=/dev/zero of=$img bs=1 count=$size";
-    _ "mkdosfs $img";
-    _ "$sudo mount -t vfat -o umask=0 $img $tmp_mnt -o loop";
-    _ "cp @grub_files $tmp_mnt";
-
-    output("$tmp_mnt/menu.lst", <<EOF);
-timeout 10
-default 0
-fallback 1
-
-title Mandrake Install
-
-root (hd0,0)
-kernel /cooker/isolinux/alt0/vmlinuz $default_append $default_acpi $default_vga automatic=method:disk
-initrd /cooker/isolinux/alt0/all.rdz
-
-title Help
-
-pause To display the help, press <space> until you reach "HELP END"
-pause .
-pause Please see http://qa.mandrakesoft.com/hd_grub.cgi for a friendlier solution
-pause .
-pause To specify the location where Mandrakelinux is copied,
-pause choose "Mandrake Install", and press "e".
-pause Then change "root (hd0,0)". FYI:
-pause - (hd0,0) is the first partition on first bios hard drive (usually hda1)
-pause - (hd0,4) is the first extended partition (usually hda5)
-pause - (hd1,0) is the first partition on second bios hard drive
-pause Replace /cooker to suits the directory containing Mandrakelinux
-pause .
-pause HELP END
-EOF
-
-    _ "$sudo umount $tmp_mnt";
-
-    output($mapfile, "(fd0) $img\n");
-
-    open(my $G, "| grub --device-map=$mapfile --batch");
-    print $G <<EOF;
-root (fd0)
-install /stage1 d (fd0) /stage2 p /menu.lst
-quit
-EOF
-    close $G;
-    unlink $mapfile;
-}
-
-sub drivers {
-    my ($type, $I, $img) = @_;
-
-    _ "dd if=/dev/zero of=$img bs=1k count=1440";
-    mke2fs($img);
-    _ "$sudo mount -t ext2 $img $tmp_mnt -o loop";
-
-    my ($ext) = $img =~ /img-(.*)/ or die "bad image name ($img)";
-    _ "$sudo cp -f kernel/all.kernels$I/$ext/${type}_modules.mar $tmp_mnt/modules$I.mar";
-
-    _ "sync";
-    _ "df $tmp_mnt";
-
-    _ "$sudo umount $tmp_mnt";
-}
diff --git a/mdk-stage1/.cvsignore b/mdk-stage1/.cvsignore
deleted file mode 100644
index 28f91e89f..000000000
--- a/mdk-stage1/.cvsignore
+++ /dev/null
@@ -1,15 +0,0 @@
-init
-init-stage2
-stage1-full
-stage1-cdrom
-stage1-disk
-stage1-medias-usb
-stage1-network
-stage1-network-usb
-debug.log
-.depend
-*.rdz*
-mkinitrd_helper.tar.bz2
-hack_*
-rescue-gui
-dhcp-client
diff --git a/mdk-stage1/Makefile b/mdk-stage1/Makefile
deleted file mode 100644
index f1721d292..000000000
--- a/mdk-stage1/Makefile
+++ /dev/null
@@ -1,263 +0,0 @@
- #******************************************************************************
- #
- #    mdk-stage1 - the program that will load second-stage install
- #
- # $Id$
- #
- # Pixel (pixel@mandrakesoft.com) (mostly done by Guillaume Cottenceau)
- #
- # Copyright 2000-2004 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- # Portions from Erik Troan (ewt@redhat.com) Copyright 1996 Red Hat Software 
- #
- #*****************************************************************************
- #
- # Currently:
- #
- # 	ix86
- # init with minilibc
- # stage1 with dietlibc
- #
- # 	ppc
- # init with dietlibc
- # stage1 with glibc
- #
- # 	ia64
- # init with glibc
- # stage1 with glibc
- #
- #	x86-64
- # init with minilibc
- # stage1 with dietlibc
- #
- #*****************************************************************************
-
-
-top_dir = .
-
-include $(top_dir)/Makefile.common
-include $(top_dir)/../Makefile.config
-
-
-DEFS = -DDISTRIB_NAME=\"$(DISTRIB_NAME)\" -DDISTRIB_VERSION=\"$(DISTRIB_VERSION)\" -DDISTRIB_DESCR=\"$(DISTRIB_DESCR)\" $(ADDITIONAL_DEFS) -D_FILE_OFFSET_BITS=64
-
-COMPILE = $(CC) $(DEFS) $(CFLAGS)
-
-ifeq (ppc, $(ARCH))
-INIT_HEADERS=init-libc-headers.h
-else
-ifeq (DIETLIBC, $(L))
-INIT_HEADERS=minilibc.h
-else
-INIT_HEADERS=init-libc-headers.h
-endif
-endif
-
-INIT_DEFS = -DINIT_HEADERS=\"$(INIT_HEADERS)\"
-
-ifeq (DIETLIBC, $(L))
-INITSRC = minilibc.c init.c
-INIT_DEFS += -fno-builtin
-else
-INITSRC = init.c
-INIT_DEFS += $(GLIBC_INCLUDES)
-endif
-
-INIT_DEFS_ADD = -DBINARY=\"/sbin/stage1\"
-ifdef MOVE
-INIT_DEFS_ADD_STAGE2 = -DBINARY=\"/usr/bin/runstage2.pl\"
-else
-INIT_DEFS_ADD_STAGE2 = -DBINARY=\"/usr/bin/runinstall2\"
-endif
-
-INITOBJS = $(subst .c,.o,$(INITSRC))
-INITOBJS-STAGE2 = $(subst .c,-STAGE2.o,$(INITSRC))
-
-
- #- frontends
-NEWT_FRONTEND_SRC = newt-frontend.c
-NEWT_FRONTEND_LIBS = newt/libnewt.a slang/libslang.a
-
-STDIO_FRONTEND_SRC = stdio-frontend.c
-STDIO_FRONTEND_LIBS =
-STDIO_FRONTEND_LIBS =
-
-
-FRONTEND_OBJS = $(subst .c,.o,$($(F)_FRONTEND_SRC))
-
-FRONTEND_LINK = $(FRONTEND_OBJS) $($(F)_FRONTEND_LIBS)
-
-ifeq (DIETLIBC, $(L))
-INSMOD = insmod-busybox
-else
-INSMOD = insmod-modutils
-endif
-
-STAGE1_OWN_LIBS = $(INSMOD)/libinsmod.a mar/libmar.a bzlib/libbzlib.a
-
-
-ifeq (DIETLIBC, $(L))
-STAGE1_NETWORK_LIBS = /usr/$(LIB)/dietlibc/lib-$(ARCH)/librpc.a
-else
-STAGE1_NETWORK_LIBS = /usr/$(LIB)/libresolv.a
-endif
-
- #- stage1 itself
-STAGE1SRC = stage1.c log.c tools.c modules.c probing.c mount.c automatic.c frontend-common.c lomount.c thirdparty.c
-CDROMSRC = cdrom.c
-DISKSRC = disk.c directory.c partition.c
-NETWORKSRC = network.c nfsmount.c dhcp.c url.c dns.c adsl.c directory.c wireless.c
-
-# use sort to remove duplicates
-STAGE1_ALLSRC = $(sort $(STAGE1SRC) $(CDROMSRC) $(DISKSRC) $(NETWORKSRC))
-ALLSRC = $(INITSRC) $(STAGE1_ALLSRC)
-
-
-
-STAGE1OBJS-CDROM = $(subst .c,-CDROM.o,$(STAGE1SRC) $(CDROMSRC))
-
-CDROM_DEFS = -DSPAWN_SHELL -DDISABLE_DISK -DDISABLE_NETWORK
-
-
-STAGE1OBJS-NETWORK = $(subst .c,-NETWORK.o,$(STAGE1SRC) $(NETWORKSRC))
-
-NETWORK_DEFS = -DSPAWN_SHELL -DDISABLE_CDROM -DDISABLE_DISK
-
-
-STAGE1OBJS-NETWORK-STANDALONE = $(subst .c,-NETWORK-STANDALONE.o,$(STAGE1SRC) $(NETWORKSRC))
-
-NETWORK_STANDALONE_DEFS = -DDISABLE_CDROM -DDISABLE_DISK -DENABLE_NETWORK_STANDALONE
-
-
-STAGE1OBJS-FULL = $(subst .c,-FULL.o,$(STAGE1_ALLSRC))
-
-BINS = init init-stage2 stage1-full dhcp-client
-
-ifndef MOVE
-ifeq (i386, $(ARCH))
-BINS += stage1-cdrom stage1-network
-endif
-ifeq (x86_64, $(ARCH))
-BINS += stage1-cdrom stage1-network
-endif
-endif
-
-DIRS += mar pci-resource usb-resource bzlib $(INSMOD) slang newt ppp/pppd rp-pppoe/src
-ifeq (i386, $(ARCH))
-DIRS += pcmcia_
-endif
-ifeq (x86_64, $(ARCH))
-DIRS += pcmcia_
-endif
-
-
-ifeq (i386,$(ARCH))
-PCMCIA_LIB = pcmcia_/libpcmcia.a
-PCMCIA_DEFS = -DENABLE_PCMCIA
-endif
-ifeq (x86_64,$(ARCH))
-PCMCIA_LIB = pcmcia_/libpcmcia.a
-PCMCIA_DEFS = -DENABLE_PCMCIA
-endif
-
-
-USB_DEFS_GEN = -DENABLE_USB
-USB_DEFS = -DENABLE_USB -DDISABLE_PCIADAPTERS
-
-all: dirs $(BINS)
-
-dirs:
-	@for n in . $(DIRS); do \
-		[ "$$n" = "." ] || make -C $$n || exit 1 ;\
-	done
-
-init: $(INITOBJS)
-	$(DIET) $(CC) $(LDFLAGS) -o $@ $^
-	$(STRIPCMD) $@
-
-init-stage2: $(INITOBJS-STAGE2)
-	$(DIET) $(CC) $(LDFLAGS) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-cdrom: $(STAGE1OBJS-CDROM) $(STAGE1_OWN_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-network: $(STAGE1OBJS-NETWORK) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(PCMCIA_LIB) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS) -o $@ $^
-	$(STRIPCMD) $@
-
-stage1-full: $(STAGE1OBJS-FULL) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) bootsplash.o $(PCMCIA_LIB) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS) -o $@ $^
-	$(STRIPCMD) $@
-
-dhcp-client: $(STAGE1OBJS-NETWORK-STANDALONE) $(STAGE1_OWN_LIBS) $(STAGE1_NETWORK_LIBS) $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS) -o $@ $^
-	$(STRIPCMD) $@
-
-
-$(INITOBJS): %.o: %.c
-	$(COMPILE) $(INIT_DEFS) $(INIT_DEFS_ADD) -c $<
-
-$(INITOBJS-STAGE2): %-STAGE2.o: %.c
-	$(COMPILE) $(INIT_DEFS) $(INIT_DEFS_ADD_STAGE2) -c $< -o $@
-
-$(STAGE1OBJS-CDROM): %-CDROM.o: %.c
-	$(DIET) $(COMPILE) $(INCLUDES) $(CDROM_DEFS) -c $< -o $@
-
-$(STAGE1OBJS-NETWORK): %-NETWORK.o: %.c
-	$(DIET) $(COMPILE) $(INCLUDES) $(NETWORK_DEFS) $(PCMCIA_DEFS) $(USB_DEFS_GEN) -DENABLE_ADDITIONAL_MODULES -c $< -o $@
-
-$(STAGE1OBJS-NETWORK-STANDALONE): %-NETWORK-STANDALONE.o: %.c
-	$(DIET) $(COMPILE) $(INCLUDES) $(NETWORK_STANDALONE_DEFS) $(USB_DEFS_GEN) -c $< -o $@
-
-$(STAGE1OBJS-FULL): %-FULL.o: %.c
-	$(DIET) $(COMPILE) $(INCLUDES) -DSPAWN_SHELL $(USB_DEFS_GEN) $(PCMCIA_DEFS) -DENABLE_BOOTSPLASH -c $< -o $@
-
-.c.o:
-	$(DIET) $(COMPILE) $(INCLUDES) -DENABLE_BOOTSPLASH -c $<
-
-
-clean: localclean
-	@for n in $(DIRS); do \
-		(cd $$n; make clean) \
-	done
-
-localclean:
-	rm -f *.o .depend *.rdz *.img rescue-gui init-move $(BINS)
-
-
-tar-mkinitrd_helper: clean
-	rm -rf mkinitrd_helper-subdir
-	mkdir mkinitrd_helper-subdir
-	cd mkinitrd_helper-subdir ; cp -a ../insmod-busybox ../Makefile.common ../insmod.h ../log.h . ; \
-	    cp ../Makefile.mkinitrd_helper Makefile
-	tar cfj mkinitrd_helper.tar.bz2 mkinitrd_helper-subdir --exclude CVS
-	rm -rf mkinitrd_helper-subdir
-
-rescue-gui: rescue-gui.o frontend-common.o $(FRONTEND_LINK) $(STAGE1_LIBC)
-	$(DIET) $(CC) $(LDFLAGS) -o $@ $^
-	$(STRIPCMD) $@
-
-
-.depend:
-	$(CPP) $(CFLAGS) -M $(ALLSRC) > .depend
-
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-
-*-CDROM.o: %-CDROM.o: %.o
-
-*-NETWORK.o: %-NETWORK.o: %.o
-
-*-FULL.o: %-FULL.o: %.o
-
diff --git a/mdk-stage1/Makefile.common b/mdk-stage1/Makefile.common
deleted file mode 100644
index ce8aab84c..000000000
--- a/mdk-stage1/Makefile.common
+++ /dev/null
@@ -1,54 +0,0 @@
- # -*- makefile -*-
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-ARCH := $(patsubst i%86,i386,$(shell uname -m))
-ARCH := $(patsubst sparc%,sparc,$(ARCH))
-
- #- default lib is dietlibc (honoured by main Makefile whenever possible)
-L = DIETLIBC
-#L = GLIBC
-
- #- default frontend is newt (honoured by main Makefile whenever possible)
-F = NEWT
-# F = STDIO
-
- #- override in some situations
-ifeq (ia64, $(ARCH))
-L = GLIBC
-endif
-
-ifeq (DIETLIBC, $(L))
-DIET = diet
-endif
-
-#- flags used by all stuff
-CFLAGS = -Os -pipe -Wall -fomit-frame-pointer -fno-strict-aliasing
-
-ifneq (ppc, $(ARCH))
-CFLAGS += -Werror
-endif
-
-DIETLIBC_INCLUDES = -I/usr/lib/dietlibc/include -I. -I$(top_dir)/bzlib
-GLIBC_INCLUDES = -I. -I$(top_dir)/bzlib
-INCLUDES = $($(L)_INCLUDES)
-
-GLIBC_LDFLAGS = -static
-LDFLAGS = $($(L)_LDFLAGS)
-
-STAGE1_LIBC = $($(L)_LIBC)
-
-STRIPCMD = strip -R .note -R .comment
-
diff --git a/mdk-stage1/Makefile.mkinitrd_helper b/mdk-stage1/Makefile.mkinitrd_helper
deleted file mode 100644
index a8db2fbe0..000000000
--- a/mdk-stage1/Makefile.mkinitrd_helper
+++ /dev/null
@@ -1,30 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-DIRS = dietlibc insmod-busybox
-
-
-all: dirs
-
-dirs:
-	@for n in . $(DIRS); do \
-		[ "$$n" = "." ] || make -C $$n ;\
-	done
-
-clean: 
-	@for n in $(DIRS); do \
-		(cd $$n; make clean) \
-	done
diff --git a/mdk-stage1/adsl.c b/mdk-stage1/adsl.c
deleted file mode 100644
index 595b3fae0..000000000
--- a/mdk-stage1/adsl.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <sys/ioctl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <resolv.h>
-#include <signal.h>
-
-#include "stage1.h"
-#include "log.h"
-#include "network.h"
-#include "modules.h"
-#include "tools.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "adsl.h"
-
-
-static enum return_type adsl_connect(struct interface_info * intf, char * username, char * password, char * acname)
-{
-	char pppoe_call[500];
-	char * pppd_launch[] = { "/sbin/pppd", "pty", pppoe_call, "noipdefault", "noauth", "default-asyncmap", "defaultroute",
-				 "hide-password", "nodetach", "usepeerdns", "local", "mtu", "1492", "mru", "1492", "noaccomp",
-				 "noccp", "nobsdcomp", "nodeflate", "nopcomp", "novj", "novjccomp", "user", username,
-				 "password", password, "lcp-echo-interval", "20", "lcp-echo-failure", "3", "lock", "persist", NULL };
-	int fd;
-	int retries = 10;
-	char * tty_adsl = "/dev/tty6";
-	enum return_type status = RETURN_ERROR;
-	pid_t ppp_pid;
-
-	snprintf(pppoe_call, sizeof(pppoe_call), "/sbin/pppoe -p /var/run/pppoe.conf-adsl.pid.pppoe -I %s -T 80 -U -m 1412", intf->device);
-
-        if (!streq(acname, "")) {
-                strcat(pppoe_call, "-C ");
-                strcat(pppoe_call, acname);
-        }
-
-	fd = open(tty_adsl, O_RDWR);
-	if (fd == -1) {
-		log_message("cannot open tty -- no pppd");
-		return RETURN_ERROR;
-	}
-	else if (access(pppd_launch[0], X_OK)) {
-		log_message("cannot open pppd - %s doesn't exist", pppd_launch[0]);
-		return RETURN_ERROR;
-	}
-
-	if (!(ppp_pid = fork())) {
-		dup2(fd, 0);
-		dup2(fd, 1);
-		dup2(fd, 2);
-		
-		close(fd);
-		setsid();
-		if (ioctl(0, TIOCSCTTY, NULL))
-			log_perror("could not set new controlling tty");
-		
-		printf("\t(exec of pppd)\n");
-		execv(pppd_launch[0], pppd_launch);
-		log_message("execve of %s failed: %s", pppd_launch[0], strerror(errno));
-		exit(-1);
-	}
-	close(fd);
-	while (retries > 0 && kill(ppp_pid, 0) == 0) {
-		FILE * f;
-		if ((f = fopen("/var/run/pppd.tdb", "rb"))) {
-			while (1) {
-				char buf[500];
-				char *p;
-				if (!fgets(buf, sizeof(buf), f))
-					break;
-				p = strstr(buf, "IPLOCAL=");
-				if (p) {
-					struct sockaddr_in addr;
-					if (inet_aton(p + 8, &addr.sin_addr))
-						intf->ip = addr.sin_addr;
-					status = RETURN_OK;
-				}
-			}
-			fclose(f);
-			if (status == RETURN_OK) {
-				log_message("PPP: connected!");
-				break;
-			}
-		}
-		retries--;
-		log_message("PPP: <sleep>");
-		sleep(2);
-	}
-
-	if (status != RETURN_OK) {
-		log_message("PPP: could not connect");
-		kill(ppp_pid, SIGTERM);
-		sleep(1);
-		kill(ppp_pid, SIGKILL);
-		sleep(1);
-	}
-	return status;
-}
-
-
-enum return_type perform_adsl(struct interface_info * intf)
-{
-	struct in_addr addr;
-	char * questions[] = { "Username", "Password", "AC Name", NULL };
-	char * questions_auto[] = { "adsluser", "adslpass", "adslacname", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-
-	inet_aton("10.0.0.10", &addr);
-	memcpy(&intf->ip, &addr, sizeof(addr));
-
-	inet_aton("255.255.255.0", &addr);
-	memcpy(&intf->netmask, &addr, sizeof(addr));
-
-	*((uint32_t *) &intf->broadcast) = (*((uint32_t *) &intf->ip) &
-					    *((uint32_t *) &intf->netmask)) | ~(*((uint32_t *) &intf->netmask));
-
-	intf->is_ptp = 0;
-
-	if (configure_net_device(intf)) {
-		stg1_error_message("Could not configure..");
-		return RETURN_ERROR;
-	}
-
-	results = ask_from_entries_auto("Please enter the username and password for your ADSL account.\n"
-                                        "Leave blank the AC Name field if you don't know what it means.\n"
-					"(Warning! only PPPoE protocol is supported)",
-					questions, &answers, 40, questions_auto, NULL);
-	if (results != RETURN_OK)
-		return results;
-
-	intf->boot_proto = BOOTPROTO_ADSL_PPPOE;
-
-	wait_message("Waiting for ADSL connection to show up...");
-	my_insmod("ppp_generic", ANY_DRIVER_TYPE, NULL, 1);
-	my_insmod("ppp_async", ANY_DRIVER_TYPE, NULL, 1);
-	results = adsl_connect(intf, answers[0], answers[1], answers[2]);
-	remove_wait_message();
-
-	if (results != RETURN_OK) {
-		wait_message("Retrying the ADSL connection...");
-		results = adsl_connect(intf, answers[0], answers[1], answers[2]);
-		remove_wait_message();
-	} else {
-		intf->user = strdup(answers[0]);
-		intf->pass = strdup(answers[1]);
-		intf->acname = strdup(answers[2]);
-	}
-
-	if (results != RETURN_OK) {
-		stg1_error_message("I could not connect to the ADSL network.");
-		return perform_adsl(intf);
-	}
-
-	sleep(1);
-	res_init();		/* reinit the resolver, pppd modified /etc/resolv.conf */
-
-	return RETURN_OK;
-}
diff --git a/mdk-stage1/adsl.h b/mdk-stage1/adsl.h
deleted file mode 100644
index fb0baf327..000000000
--- a/mdk-stage1/adsl.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * View the homepage: http://us.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- *  Portions from GRUB  --  GRand Unified Bootloader
- *  Copyright (C) 2000  Free Software Foundation, Inc.
- *
- *  Itself based on etherboot-4.6.4 by Martin Renters.
- *
- */
-
-#ifndef _ADSL_H_
-#define _ADSL_H_
-
-#include "stage1.h"
-#include "network.h"
-
-enum return_type perform_adsl(struct interface_info * intf);
-
-#endif
diff --git a/mdk-stage1/automatic.c b/mdk-stage1/automatic.c
deleted file mode 100644
index 3a816bab1..000000000
--- a/mdk-stage1/automatic.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is supposed to replace the redhat "kickstart", by name but
- * also by design (less code pollution).
- *
- */
-
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include "tools.h"
-#include "stage1.h"
-#include "frontend.h"
-#include "log.h"
-
-#include "automatic.h"
-
-
-static struct param_elem * automatic_params;
-static char * value_not_bound = "";
-
-void grab_automatic_params(char * line)
-{
-	int i, p;
-	struct param_elem tmp_params[50];
-
-	i = 0; p = 0;
-	while (line[i] != '\0') {
-		char *name, *value;
-		int k;
-		int j = i;
-		while (line[i] != ':' && line[i] != '\0')
-			i++;
-		name = memdup(&line[j], i-j + 1);
-		name[i-j] = 0;
-
-		k = i+1;
-		i++;
-		while (line[i] != ',' && line[i] != '\0')
-			i++;
-		value = memdup(&line[k], i-k + 1);
-		value[i-k] = 0;
-
-		tmp_params[p].name = name;
-		tmp_params[p].value = value;
-		p++;
-		if (line[i] == '\0')
-			break;
-		i++;
-	}
-
-	tmp_params[p++].name = NULL;
-	automatic_params = memdup(tmp_params, sizeof(struct param_elem) * p);
-
-	log_message("AUTOMATIC MODE: got %d params", p-1);
-}
-
-
-char * get_auto_value(char * auto_param)
-{
-	struct param_elem * ptr = automatic_params;
-
-	struct param_elem short_aliases[] =
-		{ { "method", "met" }, { "network", "netw" }, { "interface", "int" }, { "gateway", "gat" },
-		  { "netmask", "netm" }, { "adsluser", "adslu" }, { "adslpass", "adslp" }, { "hostname", "hos" },
-		  { "domain", "dom" }, { "server", "ser" }, { "directory", "dir" }, { "user", "use" },
-		  { "pass", "pas" }, { "disk", "dis" }, { "partition", "par" }, { "proxy_host", "proxh" },
-		  { "proxy_port", "proxp" }, { NULL, NULL } };
-	struct param_elem * ptr_alias = short_aliases;
-	while (ptr_alias->name) {
-		if (streq(auto_param, ptr_alias->name))
-			break;
-		ptr_alias++;
-	}
-
-	while (ptr->name) {
-		if (streq(ptr->name, auto_param)
-		    || (ptr_alias->name && streq(ptr_alias->value, ptr->name)))
-			return ptr->value;
-		ptr++;
-	}
-
-	return value_not_bound;
-}
-
-
-enum return_type ask_from_list_auto(char *msg, char ** elems, char ** choice, char * auto_param, char ** elems_auto)
-{
-	if (!IS_AUTOMATIC) {
-		exit_bootsplash();
-		return ask_from_list(msg, elems, choice);
-	} else {
-		char ** sav_elems = elems;
-		char * tmp = get_auto_value(auto_param);
-		while (elems && *elems) {
-			if (!strcmp(tmp, *elems_auto)) {
-				*choice = *elems;
-				log_message("AUTOMATIC: parameter %s for %s means returning %s", tmp, auto_param, *elems);
-				return RETURN_OK;
-			}
-			elems++;
-			elems_auto++;
-		}
-		unset_automatic(); /* we are in a fallback mode */
-		return ask_from_list(msg, sav_elems, choice);
-	}
-}
-
-enum return_type ask_from_list_comments_auto(char *msg, char ** elems, char ** elems_comments, char ** choice, char * auto_param, char ** elems_auto)
-{
-	if (!IS_AUTOMATIC) {
-		exit_bootsplash();
-		return ask_from_list_comments(msg, elems, elems_comments, choice);
-	} else {
-		char ** sav_elems = elems;
-		char * tmp = get_auto_value(auto_param);
-		while (elems && *elems) {
-			if (!strcmp(tmp, *elems_auto)) {
-				*choice = *elems;
-				log_message("AUTOMATIC: parameter %s for %s means returning %s", tmp, auto_param, *elems);
-				return RETURN_OK;
-			}
-			elems++;
-			elems_auto++;
-		}
-		unset_automatic(); /* we are in a fallback mode */
-		return ask_from_list_comments(msg, sav_elems, elems_comments, choice);
-	}
-}
-
-
-enum return_type ask_from_entries_auto(char *msg, char ** questions, char *** answers, int entry_size, char ** questions_auto, void (*callback_func)(char ** strings))
-{
-	if (!IS_AUTOMATIC) {
-		exit_bootsplash();
-		return ask_from_entries(msg, questions, answers, entry_size, callback_func);
-	} else {
-		char * tmp_answers[50];
-		int i = 0;
-		while (questions && *questions) {
-			tmp_answers[i] = get_auto_value(*questions_auto);
-			log_message("AUTOMATIC: question %s answers %s because of param %s", *questions, tmp_answers[i], *questions_auto);
-			i++;
-			questions++;
-			questions_auto++;
-			
-		}
-		*answers = memdup(tmp_answers, sizeof(char *) * i);
-		return RETURN_OK;
-	}
-}
diff --git a/mdk-stage1/automatic.h b/mdk-stage1/automatic.h
deleted file mode 100644
index a5bfe212b..000000000
--- a/mdk-stage1/automatic.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This is supposed to replace the redhat "kickstart", by name but
- * also by design (no code pollution).
- *
- */
-
-#ifndef _AUTOMATIC_H_
-#define _AUTOMATIC_H_
-
-#include "stage1.h"
-
-void grab_automatic_params(char * line);
-char * get_auto_value(char * auto_param);
-
-enum return_type ask_from_list_auto(char *msg, char ** elems, char ** choice, char * auto_param, char ** elems_auto);
-enum return_type ask_from_list_comments_auto(char *msg, char ** elems, char ** elems_comments, char ** choice, char * auto_param, char ** elems_auto);
-enum return_type ask_from_entries_auto(char *msg, char ** questions, char *** answers, int entry_size, char ** questions_auto, void (*callback_func)(char ** strings));
-
-#endif
diff --git a/mdk-stage1/bootsplash.c b/mdk-stage1/bootsplash.c
deleted file mode 100644
index d51deb543..000000000
--- a/mdk-stage1/bootsplash.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Pixel (pixel@mandrakesoft.com)
- *
- * Copyright 2004 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-#include "bootsplash.h"
-#include "frontend.h"
-#include "log.h"
-
-static int total_size;
-static float previous;
-static FILE* splash = NULL;
-
-static void update_progression_only(int current_size)
-{
-	if (splash && total_size) {
-		float ratio = (float) (current_size + 1) / total_size;
-		if (ratio > previous + 0.01) {
-			fprintf(splash, "show %d\n", (int) (ratio * 65534));
-			fflush(splash);
-			previous = ratio;
-		}
-	}
-}
-
-static void open_bootsplash(void)
-{
-	if (!splash) splash = fopen("/proc/splash", "w");
-	if (!splash) log_message("opening /proc/splash failed");
-}
-
-void exit_bootsplash(void)
-{
-	log_message("exiting bootsplash");
-	open_bootsplash();
-	if (splash) {
-		fprintf(splash, "verbose\n");
-		fflush(splash);
-	}
-}
-
-
-void init_progression(char *msg, int size)
-{
-	previous = 0; total_size = size;
-	open_bootsplash();
-	update_progression_only(0);
-	init_progression_raw(msg, size);
-}
-
-void update_progression(int current_size)
-{
-	update_progression_only(current_size);
-	update_progression_raw(current_size);
-}
-
-void end_progression(void)
-{
-	end_progression_raw();
-}
diff --git a/mdk-stage1/bootsplash.h b/mdk-stage1/bootsplash.h
deleted file mode 100644
index 7d1c8403c..000000000
--- a/mdk-stage1/bootsplash.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Pixel (pixel@mandrakesoft.com)
- *
- * Copyright 2004 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _BOOTSPLASH_H_
-#define _BOOTSPLASH_H_
-
-#ifdef ENABLE_BOOTSPLASH
-void exit_bootsplash(void);
-void tell_bootsplash(char *cmd);
-#else
-#define exit_bootsplash()
-#endif
-
-#endif
diff --git a/mdk-stage1/bzlib/Makefile b/mdk-stage1/bzlib/Makefile
deleted file mode 100644
index 929164253..000000000
--- a/mdk-stage1/bzlib/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libbzlib
-
-OBJS = blocksort.o bzlib.o compress.o crctable.o decompress.o huffman.o randtable.o
-
-DEFS =
-
-INCS =
-
-
-TARGETS = $(LIBNAME).a
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a
-
-$(LIBNAME).a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-$(OBJS): %.o: %.c
-	$(DIET) $(CC) $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -c $< -o $@
diff --git a/mdk-stage1/bzlib/blocksort.c b/mdk-stage1/bzlib/blocksort.c
deleted file mode 100644
index c1b78c483..000000000
--- a/mdk-stage1/bzlib/blocksort.c
+++ /dev/null
@@ -1,1138 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Block sorting machinery                               ---*/
-/*---                                           blocksort.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
-
-  To get some idea how the block sorting algorithms in this file 
-  work, read my paper 
-     On the Performance of BWT Sorting Algorithms
-  in Proceedings of the IEEE Data Compression Conference 2000,
-  Snowbird, Utah, USA, 27-30 March 2000.  The main sort in this
-  file implements the algorithm called  cache  in the paper.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------*/
-/*--- Fallback O(N log(N)^2) sorting        ---*/
-/*--- algorithm, for repetitive blocks      ---*/
-/*---------------------------------------------*/
-
-/*---------------------------------------------*/
-static 
-__inline__
-void fallbackSimpleSort ( UInt32* fmap, 
-                          UInt32* eclass, 
-                          Int32   lo, 
-                          Int32   hi )
-{
-   Int32 i, j, tmp;
-   UInt32 ec_tmp;
-
-   if (lo == hi) return;
-
-   if (hi - lo > 3) {
-      for ( i = hi-4; i >= lo; i-- ) {
-         tmp = fmap[i];
-         ec_tmp = eclass[tmp];
-         for ( j = i+4; j <= hi && ec_tmp > eclass[fmap[j]]; j += 4 )
-            fmap[j-4] = fmap[j];
-         fmap[j-4] = tmp;
-      }
-   }
-
-   for ( i = hi-1; i >= lo; i-- ) {
-      tmp = fmap[i];
-      ec_tmp = eclass[tmp];
-      for ( j = i+1; j <= hi && ec_tmp > eclass[fmap[j]]; j++ )
-         fmap[j-1] = fmap[j];
-      fmap[j-1] = tmp;
-   }
-}
-
-
-/*---------------------------------------------*/
-#define fswap(zz1, zz2) \
-   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
-
-#define fvswap(zzp1, zzp2, zzn)       \
-{                                     \
-   Int32 yyp1 = (zzp1);               \
-   Int32 yyp2 = (zzp2);               \
-   Int32 yyn  = (zzn);                \
-   while (yyn > 0) {                  \
-      fswap(fmap[yyp1], fmap[yyp2]);  \
-      yyp1++; yyp2++; yyn--;          \
-   }                                  \
-}
-
-
-#define fmin(a,b) ((a) < (b)) ? (a) : (b)
-
-#define fpush(lz,hz) { stackLo[sp] = lz; \
-                       stackHi[sp] = hz; \
-                       sp++; }
-
-#define fpop(lz,hz) { sp--;              \
-                      lz = stackLo[sp];  \
-                      hz = stackHi[sp]; }
-
-#define FALLBACK_QSORT_SMALL_THRESH 10
-#define FALLBACK_QSORT_STACK_SIZE   100
-
-
-static
-void fallbackQSort3 ( UInt32* fmap, 
-                      UInt32* eclass,
-                      Int32   loSt, 
-                      Int32   hiSt )
-{
-   Int32 unLo, unHi, ltLo, gtHi, n, m;
-   Int32 sp, lo, hi;
-   UInt32 med, r, r3;
-   Int32 stackLo[FALLBACK_QSORT_STACK_SIZE];
-   Int32 stackHi[FALLBACK_QSORT_STACK_SIZE];
-
-   r = 0;
-
-   sp = 0;
-   fpush ( loSt, hiSt );
-
-   while (sp > 0) {
-
-      AssertH ( sp < FALLBACK_QSORT_STACK_SIZE, 1004 );
-
-      fpop ( lo, hi );
-      if (hi - lo < FALLBACK_QSORT_SMALL_THRESH) {
-         fallbackSimpleSort ( fmap, eclass, lo, hi );
-         continue;
-      }
-
-      /* Random partitioning.  Median of 3 sometimes fails to
-         avoid bad cases.  Median of 9 seems to help but 
-         looks rather expensive.  This too seems to work but
-         is cheaper.  Guidance for the magic constants 
-         7621 and 32768 is taken from Sedgewick's algorithms
-         book, chapter 35.
-      */
-      r = ((r * 7621) + 1) % 32768;
-      r3 = r % 3;
-      if (r3 == 0) med = eclass[fmap[lo]]; else
-      if (r3 == 1) med = eclass[fmap[(lo+hi)>>1]]; else
-                   med = eclass[fmap[hi]];
-
-      unLo = ltLo = lo;
-      unHi = gtHi = hi;
-
-      while (1) {
-         while (1) {
-            if (unLo > unHi) break;
-            n = (Int32)eclass[fmap[unLo]] - (Int32)med;
-            if (n == 0) { 
-               fswap(fmap[unLo], fmap[ltLo]); 
-               ltLo++; unLo++; 
-               continue; 
-            };
-            if (n > 0) break;
-            unLo++;
-         }
-         while (1) {
-            if (unLo > unHi) break;
-            n = (Int32)eclass[fmap[unHi]] - (Int32)med;
-            if (n == 0) { 
-               fswap(fmap[unHi], fmap[gtHi]); 
-               gtHi--; unHi--; 
-               continue; 
-            };
-            if (n < 0) break;
-            unHi--;
-         }
-         if (unLo > unHi) break;
-         fswap(fmap[unLo], fmap[unHi]); unLo++; unHi--;
-      }
-
-      AssertD ( unHi == unLo-1, "fallbackQSort3(2)" );
-
-      if (gtHi < ltLo) continue;
-
-      n = fmin(ltLo-lo, unLo-ltLo); fvswap(lo, unLo-n, n);
-      m = fmin(hi-gtHi, gtHi-unHi); fvswap(unLo, hi-m+1, m);
-
-      n = lo + unLo - ltLo - 1;
-      m = hi - (gtHi - unHi) + 1;
-
-      if (n - lo > hi - m) {
-         fpush ( lo, n );
-         fpush ( m, hi );
-      } else {
-         fpush ( m, hi );
-         fpush ( lo, n );
-      }
-   }
-}
-
-#undef fmin
-#undef fpush
-#undef fpop
-#undef fswap
-#undef fvswap
-#undef FALLBACK_QSORT_SMALL_THRESH
-#undef FALLBACK_QSORT_STACK_SIZE
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > 0
-      eclass exists for [0 .. nblock-1]
-      ((UChar*)eclass) [0 .. nblock-1] holds block
-      ptr exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)eclass) [0 .. nblock-1] holds block
-      All other areas of eclass destroyed
-      fmap [0 .. nblock-1] holds sorted order
-      bhtab [ 0 .. 2+(nblock/32) ] destroyed
-*/
-
-#define       SET_BH(zz)  bhtab[(zz) >> 5] |= (1 << ((zz) & 31))
-#define     CLEAR_BH(zz)  bhtab[(zz) >> 5] &= ~(1 << ((zz) & 31))
-#define     ISSET_BH(zz)  (bhtab[(zz) >> 5] & (1 << ((zz) & 31)))
-#define      WORD_BH(zz)  bhtab[(zz) >> 5]
-#define UNALIGNED_BH(zz)  ((zz) & 0x01f)
-
-static
-void fallbackSort ( UInt32* fmap, 
-                    UInt32* eclass, 
-                    UInt32* bhtab,
-                    Int32   nblock,
-                    Int32   verb )
-{
-   Int32 ftab[257];
-   Int32 ftabCopy[256];
-   Int32 H, i, j, k, l, r, cc, cc1;
-   Int32 nNotDone;
-   Int32 nBhtab;
-   UChar* eclass8 = (UChar*)eclass;
-
-   /*--
-      Initial 1-char radix sort to generate
-      initial fmap and initial BH bits.
-   --*/
-   if (verb >= 4)
-      VPrintf0 ( "        bucket sorting ...\n" );
-   for (i = 0; i < 257;    i++) ftab[i] = 0;
-   for (i = 0; i < nblock; i++) ftab[eclass8[i]]++;
-   for (i = 0; i < 256;    i++) ftabCopy[i] = ftab[i];
-   for (i = 1; i < 257;    i++) ftab[i] += ftab[i-1];
-
-   for (i = 0; i < nblock; i++) {
-      j = eclass8[i];
-      k = ftab[j] - 1;
-      ftab[j] = k;
-      fmap[k] = i;
-   }
-
-   nBhtab = 2 + (nblock / 32);
-   for (i = 0; i < nBhtab; i++) bhtab[i] = 0;
-   for (i = 0; i < 256; i++) SET_BH(ftab[i]);
-
-   /*--
-      Inductively refine the buckets.  Kind-of an
-      "exponential radix sort" (!), inspired by the
-      Manber-Myers suffix array construction algorithm.
-   --*/
-
-   /*-- set sentinel bits for block-end detection --*/
-   for (i = 0; i < 32; i++) { 
-      SET_BH(nblock + 2*i);
-      CLEAR_BH(nblock + 2*i + 1);
-   }
-
-   /*-- the log(N) loop --*/
-   H = 1;
-   while (1) {
-
-      if (verb >= 4) 
-         VPrintf1 ( "        depth %6d has ", H );
-
-      j = 0;
-      for (i = 0; i < nblock; i++) {
-         if (ISSET_BH(i)) j = i;
-         k = fmap[i] - H; if (k < 0) k += nblock;
-         eclass[k] = j;
-      }
-
-      nNotDone = 0;
-      r = -1;
-      while (1) {
-
-	 /*-- find the next non-singleton bucket --*/
-         k = r + 1;
-         while (ISSET_BH(k) && UNALIGNED_BH(k)) k++;
-         if (ISSET_BH(k)) {
-            while (WORD_BH(k) == 0xffffffff) k += 32;
-            while (ISSET_BH(k)) k++;
-         }
-         l = k - 1;
-         if (l >= nblock) break;
-         while (!ISSET_BH(k) && UNALIGNED_BH(k)) k++;
-         if (!ISSET_BH(k)) {
-            while (WORD_BH(k) == 0x00000000) k += 32;
-            while (!ISSET_BH(k)) k++;
-         }
-         r = k - 1;
-         if (r >= nblock) break;
-
-         /*-- now [l, r] bracket current bucket --*/
-         if (r > l) {
-            nNotDone += (r - l + 1);
-            fallbackQSort3 ( fmap, eclass, l, r );
-
-            /*-- scan bucket and generate header bits-- */
-            cc = -1;
-            for (i = l; i <= r; i++) {
-               cc1 = eclass[fmap[i]];
-               if (cc != cc1) { SET_BH(i); cc = cc1; };
-            }
-         }
-      }
-
-      if (verb >= 4) 
-         VPrintf1 ( "%6d unresolved strings\n", nNotDone );
-
-      H *= 2;
-      if (H > nblock || nNotDone == 0) break;
-   }
-
-   /*-- 
-      Reconstruct the original block in
-      eclass8 [0 .. nblock-1], since the
-      previous phase destroyed it.
-   --*/
-   if (verb >= 4)
-      VPrintf0 ( "        reconstructing block ...\n" );
-   j = 0;
-   for (i = 0; i < nblock; i++) {
-      while (ftabCopy[j] == 0) j++;
-      ftabCopy[j]--;
-      eclass8[fmap[i]] = (UChar)j;
-   }
-   AssertH ( j < 256, 1005 );
-}
-
-#undef       SET_BH
-#undef     CLEAR_BH
-#undef     ISSET_BH
-#undef      WORD_BH
-#undef UNALIGNED_BH
-
-
-/*---------------------------------------------*/
-/*--- The main, O(N^2 log(N)) sorting       ---*/
-/*--- algorithm.  Faster for "normal"       ---*/
-/*--- non-repetitive blocks.                ---*/
-/*---------------------------------------------*/
-
-/*---------------------------------------------*/
-static
-__inline__
-Bool mainGtU ( UInt32  i1, 
-               UInt32  i2,
-               UChar*  block, 
-               UInt16* quadrant,
-               UInt32  nblock,
-               Int32*  budget )
-{
-   Int32  k;
-   UChar  c1, c2;
-   UInt16 s1, s2;
-
-   AssertD ( i1 != i2, "mainGtU" );
-   /* 1 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 2 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 3 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 4 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 5 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 6 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 7 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 8 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 9 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 10 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 11 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-   /* 12 */
-   c1 = block[i1]; c2 = block[i2];
-   if (c1 != c2) return (c1 > c2);
-   i1++; i2++;
-
-   k = nblock + 8;
-
-   do {
-      /* 1 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 2 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 3 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 4 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 5 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 6 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 7 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-      /* 8 */
-      c1 = block[i1]; c2 = block[i2];
-      if (c1 != c2) return (c1 > c2);
-      s1 = quadrant[i1]; s2 = quadrant[i2];
-      if (s1 != s2) return (s1 > s2);
-      i1++; i2++;
-
-      if (i1 >= nblock) i1 -= nblock;
-      if (i2 >= nblock) i2 -= nblock;
-
-      k -= 8;
-      (*budget)--;
-   }
-      while (k >= 0);
-
-   return False;
-}
-
-
-/*---------------------------------------------*/
-/*--
-   Knuth's increments seem to work better
-   than Incerpi-Sedgewick here.  Possibly
-   because the number of elems to sort is
-   usually small, typically <= 20.
---*/
-static
-Int32 incs[14] = { 1, 4, 13, 40, 121, 364, 1093, 3280,
-                   9841, 29524, 88573, 265720,
-                   797161, 2391484 };
-
-static
-void mainSimpleSort ( UInt32* ptr,
-                      UChar*  block,
-                      UInt16* quadrant,
-                      Int32   nblock,
-                      Int32   lo, 
-                      Int32   hi, 
-                      Int32   d,
-                      Int32*  budget )
-{
-   Int32 i, j, h, bigN, hp;
-   UInt32 v;
-
-   bigN = hi - lo + 1;
-   if (bigN < 2) return;
-
-   hp = 0;
-   while (incs[hp] < bigN) hp++;
-   hp--;
-
-   for (; hp >= 0; hp--) {
-      h = incs[hp];
-
-      i = lo + h;
-      while (True) {
-
-         /*-- copy 1 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         /*-- copy 2 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         /*-- copy 3 --*/
-         if (i > hi) break;
-         v = ptr[i];
-         j = i;
-         while ( mainGtU ( 
-                    ptr[j-h]+d, v+d, block, quadrant, nblock, budget 
-                 ) ) {
-            ptr[j] = ptr[j-h];
-            j = j - h;
-            if (j <= (lo + h - 1)) break;
-         }
-         ptr[j] = v;
-         i++;
-
-         if (*budget < 0) return;
-      }
-   }
-}
-
-
-/*---------------------------------------------*/
-/*--
-   The following is an implementation of
-   an elegant 3-way quicksort for strings,
-   described in a paper "Fast Algorithms for
-   Sorting and Searching Strings", by Robert
-   Sedgewick and Jon L. Bentley.
---*/
-
-#define mswap(zz1, zz2) \
-   { Int32 zztmp = zz1; zz1 = zz2; zz2 = zztmp; }
-
-#define mvswap(zzp1, zzp2, zzn)       \
-{                                     \
-   Int32 yyp1 = (zzp1);               \
-   Int32 yyp2 = (zzp2);               \
-   Int32 yyn  = (zzn);                \
-   while (yyn > 0) {                  \
-      mswap(ptr[yyp1], ptr[yyp2]);    \
-      yyp1++; yyp2++; yyn--;          \
-   }                                  \
-}
-
-static 
-__inline__
-UChar mmed3 ( UChar a, UChar b, UChar c )
-{
-   UChar t;
-   if (a > b) { t = a; a = b; b = t; };
-   if (b > c) { 
-      b = c;
-      if (a > b) b = a;
-   }
-   return b;
-}
-
-#define mmin(a,b) ((a) < (b)) ? (a) : (b)
-
-#define mpush(lz,hz,dz) { stackLo[sp] = lz; \
-                          stackHi[sp] = hz; \
-                          stackD [sp] = dz; \
-                          sp++; }
-
-#define mpop(lz,hz,dz) { sp--;             \
-                         lz = stackLo[sp]; \
-                         hz = stackHi[sp]; \
-                         dz = stackD [sp]; }
-
-
-#define mnextsize(az) (nextHi[az]-nextLo[az])
-
-#define mnextswap(az,bz)                                        \
-   { Int32 tz;                                                  \
-     tz = nextLo[az]; nextLo[az] = nextLo[bz]; nextLo[bz] = tz; \
-     tz = nextHi[az]; nextHi[az] = nextHi[bz]; nextHi[bz] = tz; \
-     tz = nextD [az]; nextD [az] = nextD [bz]; nextD [bz] = tz; }
-
-
-#define MAIN_QSORT_SMALL_THRESH 20
-#define MAIN_QSORT_DEPTH_THRESH (BZ_N_RADIX + BZ_N_QSORT)
-#define MAIN_QSORT_STACK_SIZE 100
-
-static
-void mainQSort3 ( UInt32* ptr,
-                  UChar*  block,
-                  UInt16* quadrant,
-                  Int32   nblock,
-                  Int32   loSt, 
-                  Int32   hiSt, 
-                  Int32   dSt,
-                  Int32*  budget )
-{
-   Int32 unLo, unHi, ltLo, gtHi, n, m, med;
-   Int32 sp, lo, hi, d;
-
-   Int32 stackLo[MAIN_QSORT_STACK_SIZE];
-   Int32 stackHi[MAIN_QSORT_STACK_SIZE];
-   Int32 stackD [MAIN_QSORT_STACK_SIZE];
-
-   Int32 nextLo[3];
-   Int32 nextHi[3];
-   Int32 nextD [3];
-
-   sp = 0;
-   mpush ( loSt, hiSt, dSt );
-
-   while (sp > 0) {
-
-      AssertH ( sp < MAIN_QSORT_STACK_SIZE, 1001 );
-
-      mpop ( lo, hi, d );
-      if (hi - lo < MAIN_QSORT_SMALL_THRESH || 
-          d > MAIN_QSORT_DEPTH_THRESH) {
-         mainSimpleSort ( ptr, block, quadrant, nblock, lo, hi, d, budget );
-         if (*budget < 0) return;
-         continue;
-      }
-
-      med = (Int32) 
-            mmed3 ( block[ptr[ lo         ]+d],
-                    block[ptr[ hi         ]+d],
-                    block[ptr[ (lo+hi)>>1 ]+d] );
-
-      unLo = ltLo = lo;
-      unHi = gtHi = hi;
-
-      while (True) {
-         while (True) {
-            if (unLo > unHi) break;
-            n = ((Int32)block[ptr[unLo]+d]) - med;
-            if (n == 0) { 
-               mswap(ptr[unLo], ptr[ltLo]); 
-               ltLo++; unLo++; continue; 
-            };
-            if (n >  0) break;
-            unLo++;
-         }
-         while (True) {
-            if (unLo > unHi) break;
-            n = ((Int32)block[ptr[unHi]+d]) - med;
-            if (n == 0) { 
-               mswap(ptr[unHi], ptr[gtHi]); 
-               gtHi--; unHi--; continue; 
-            };
-            if (n <  0) break;
-            unHi--;
-         }
-         if (unLo > unHi) break;
-         mswap(ptr[unLo], ptr[unHi]); unLo++; unHi--;
-      }
-
-      AssertD ( unHi == unLo-1, "mainQSort3(2)" );
-
-      if (gtHi < ltLo) {
-         mpush(lo, hi, d+1 );
-         continue;
-      }
-
-      n = mmin(ltLo-lo, unLo-ltLo); mvswap(lo, unLo-n, n);
-      m = mmin(hi-gtHi, gtHi-unHi); mvswap(unLo, hi-m+1, m);
-
-      n = lo + unLo - ltLo - 1;
-      m = hi - (gtHi - unHi) + 1;
-
-      nextLo[0] = lo;  nextHi[0] = n;   nextD[0] = d;
-      nextLo[1] = m;   nextHi[1] = hi;  nextD[1] = d;
-      nextLo[2] = n+1; nextHi[2] = m-1; nextD[2] = d+1;
-
-      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
-      if (mnextsize(1) < mnextsize(2)) mnextswap(1,2);
-      if (mnextsize(0) < mnextsize(1)) mnextswap(0,1);
-
-      AssertD (mnextsize(0) >= mnextsize(1), "mainQSort3(8)" );
-      AssertD (mnextsize(1) >= mnextsize(2), "mainQSort3(9)" );
-
-      mpush (nextLo[0], nextHi[0], nextD[0]);
-      mpush (nextLo[1], nextHi[1], nextD[1]);
-      mpush (nextLo[2], nextHi[2], nextD[2]);
-   }
-}
-
-#undef mswap
-#undef mvswap
-#undef mpush
-#undef mpop
-#undef mmin
-#undef mnextsize
-#undef mnextswap
-#undef MAIN_QSORT_SMALL_THRESH
-#undef MAIN_QSORT_DEPTH_THRESH
-#undef MAIN_QSORT_STACK_SIZE
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > N_OVERSHOOT
-      block32 exists for [0 .. nblock-1 +N_OVERSHOOT]
-      ((UChar*)block32) [0 .. nblock-1] holds block
-      ptr exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)block32) [0 .. nblock-1] holds block
-      All other areas of block32 destroyed
-      ftab [0 .. 65536 ] destroyed
-      ptr [0 .. nblock-1] holds sorted order
-      if (*budget < 0), sorting was abandoned
-*/
-
-#define BIGFREQ(b) (ftab[((b)+1) << 8] - ftab[(b) << 8])
-#define SETMASK (1 << 21)
-#define CLEARMASK (~(SETMASK))
-
-static
-void mainSort ( UInt32* ptr, 
-                UChar*  block,
-                UInt16* quadrant, 
-                UInt32* ftab,
-                Int32   nblock,
-                Int32   verb,
-                Int32*  budget )
-{
-   Int32  i, j, k, ss, sb;
-   Int32  runningOrder[256];
-   Bool   bigDone[256];
-   Int32  copyStart[256];
-   Int32  copyEnd  [256];
-   UChar  c1;
-   Int32  numQSorted;
-   UInt16 s;
-   if (verb >= 4) VPrintf0 ( "        main sort initialise ...\n" );
-
-   /*-- set up the 2-byte frequency table --*/
-   for (i = 65536; i >= 0; i--) ftab[i] = 0;
-
-   j = block[0] << 8;
-   i = nblock-1;
-   for (; i >= 3; i -= 4) {
-      quadrant[i] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
-      ftab[j]++;
-      quadrant[i-1] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-1]) << 8);
-      ftab[j]++;
-      quadrant[i-2] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-2]) << 8);
-      ftab[j]++;
-      quadrant[i-3] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i-3]) << 8);
-      ftab[j]++;
-   }
-   for (; i >= 0; i--) {
-      quadrant[i] = 0;
-      j = (j >> 8) | ( ((UInt16)block[i]) << 8);
-      ftab[j]++;
-   }
-
-   /*-- (emphasises close relationship of block & quadrant) --*/
-   for (i = 0; i < BZ_N_OVERSHOOT; i++) {
-      block   [nblock+i] = block[i];
-      quadrant[nblock+i] = 0;
-   }
-
-   if (verb >= 4) VPrintf0 ( "        bucket sorting ...\n" );
-
-   /*-- Complete the initial radix sort --*/
-   for (i = 1; i <= 65536; i++) ftab[i] += ftab[i-1];
-
-   s = block[0] << 8;
-   i = nblock-1;
-   for (; i >= 3; i -= 4) {
-      s = (s >> 8) | (block[i] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i;
-      s = (s >> 8) | (block[i-1] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-1;
-      s = (s >> 8) | (block[i-2] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-2;
-      s = (s >> 8) | (block[i-3] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i-3;
-   }
-   for (; i >= 0; i--) {
-      s = (s >> 8) | (block[i] << 8);
-      j = ftab[s] -1;
-      ftab[s] = j;
-      ptr[j] = i;
-   }
-
-   /*--
-      Now ftab contains the first loc of every small bucket.
-      Calculate the running order, from smallest to largest
-      big bucket.
-   --*/
-   for (i = 0; i <= 255; i++) {
-      bigDone     [i] = False;
-      runningOrder[i] = i;
-   }
-
-   {
-      Int32 vv;
-      Int32 h = 1;
-      do h = 3 * h + 1; while (h <= 256);
-      do {
-         h = h / 3;
-         for (i = h; i <= 255; i++) {
-            vv = runningOrder[i];
-            j = i;
-            while ( BIGFREQ(runningOrder[j-h]) > BIGFREQ(vv) ) {
-               runningOrder[j] = runningOrder[j-h];
-               j = j - h;
-               if (j <= (h - 1)) goto zero;
-            }
-            zero:
-            runningOrder[j] = vv;
-         }
-      } while (h != 1);
-   }
-
-   /*--
-      The main sorting loop.
-   --*/
-
-   numQSorted = 0;
-
-   for (i = 0; i <= 255; i++) {
-
-      /*--
-         Process big buckets, starting with the least full.
-         Basically this is a 3-step process in which we call
-         mainQSort3 to sort the small buckets [ss, j], but
-         also make a big effort to avoid the calls if we can.
-      --*/
-      ss = runningOrder[i];
-
-      /*--
-         Step 1:
-         Complete the big bucket [ss] by quicksorting
-         any unsorted small buckets [ss, j], for j != ss.  
-         Hopefully previous pointer-scanning phases have already
-         completed many of the small buckets [ss, j], so
-         we don't have to sort them at all.
-      --*/
-      for (j = 0; j <= 255; j++) {
-         if (j != ss) {
-            sb = (ss << 8) + j;
-            if ( ! (ftab[sb] & SETMASK) ) {
-               Int32 lo = ftab[sb]   & CLEARMASK;
-               Int32 hi = (ftab[sb+1] & CLEARMASK) - 1;
-               if (hi > lo) {
-                  if (verb >= 4)
-                     VPrintf4 ( "        qsort [0x%x, 0x%x]   "
-                                "done %d   this %d\n",
-                                ss, j, numQSorted, hi - lo + 1 );
-                  mainQSort3 ( 
-                     ptr, block, quadrant, nblock, 
-                     lo, hi, BZ_N_RADIX, budget 
-                  );   
-                  numQSorted += (hi - lo + 1);
-                  if (*budget < 0) return;
-               }
-            }
-            ftab[sb] |= SETMASK;
-         }
-      }
-
-      AssertH ( !bigDone[ss], 1006 );
-
-      /*--
-         Step 2:
-         Now scan this big bucket [ss] so as to synthesise the
-         sorted order for small buckets [t, ss] for all t,
-         including, magically, the bucket [ss,ss] too.
-         This will avoid doing Real Work in subsequent Step 1's.
-      --*/
-      {
-         for (j = 0; j <= 255; j++) {
-            copyStart[j] =  ftab[(j << 8) + ss]     & CLEARMASK;
-            copyEnd  [j] = (ftab[(j << 8) + ss + 1] & CLEARMASK) - 1;
-         }
-         for (j = ftab[ss << 8] & CLEARMASK; j < copyStart[ss]; j++) {
-            k = ptr[j]-1; if (k < 0) k += nblock;
-            c1 = block[k];
-            if (!bigDone[c1])
-               ptr[ copyStart[c1]++ ] = k;
-         }
-         for (j = (ftab[(ss+1) << 8] & CLEARMASK) - 1; j > copyEnd[ss]; j--) {
-            k = ptr[j]-1; if (k < 0) k += nblock;
-            c1 = block[k];
-            if (!bigDone[c1]) 
-               ptr[ copyEnd[c1]-- ] = k;
-         }
-      }
-
-      AssertH ( copyStart[ss]-1 == copyEnd[ss], 1007 );
-
-      for (j = 0; j <= 255; j++) ftab[(j << 8) + ss] |= SETMASK;
-
-      /*--
-         Step 3:
-         The [ss] big bucket is now done.  Record this fact,
-         and update the quadrant descriptors.  Remember to
-         update quadrants in the overshoot area too, if
-         necessary.  The "if (i < 255)" test merely skips
-         this updating for the last bucket processed, since
-         updating for the last bucket is pointless.
-
-         The quadrant array provides a way to incrementally
-         cache sort orderings, as they appear, so as to 
-         make subsequent comparisons in fullGtU() complete
-         faster.  For repetitive blocks this makes a big
-         difference (but not big enough to be able to avoid
-         the fallback sorting mechanism, exponential radix sort).
-
-         The precise meaning is: at all times:
-
-            for 0 <= i < nblock and 0 <= j <= nblock
-
-            if block[i] != block[j], 
-
-               then the relative values of quadrant[i] and 
-                    quadrant[j] are meaningless.
-
-               else {
-                  if quadrant[i] < quadrant[j]
-                     then the string starting at i lexicographically
-                     precedes the string starting at j
-
-                  else if quadrant[i] > quadrant[j]
-                     then the string starting at j lexicographically
-                     precedes the string starting at i
-
-                  else
-                     the relative ordering of the strings starting
-                     at i and j has not yet been determined.
-               }
-      --*/
-      bigDone[ss] = True;
-
-      if (i < 255) {
-         Int32 bbStart  = ftab[ss << 8] & CLEARMASK;
-         Int32 bbSize   = (ftab[(ss+1) << 8] & CLEARMASK) - bbStart;
-         Int32 shifts   = 0;
-
-         while ((bbSize >> shifts) > 65534) shifts++;
-
-         for (j = bbSize-1; j >= 0; j--) {
-            Int32 a2update     = ptr[bbStart + j];
-            UInt16 qVal        = (UInt16)(j >> shifts);
-            quadrant[a2update] = qVal;
-            if (a2update < BZ_N_OVERSHOOT)
-               quadrant[a2update + nblock] = qVal;
-         }
-         AssertH ( ((bbSize-1) >> shifts) <= 65535, 1002 );
-      }
-
-   }
-
-   if (verb >= 4)
-      VPrintf3 ( "        %d pointers, %d sorted, %d scanned\n",
-                 nblock, numQSorted, nblock - numQSorted );
-}
-
-#undef BIGFREQ
-#undef SETMASK
-#undef CLEARMASK
-
-
-/*---------------------------------------------*/
-/* Pre:
-      nblock > 0
-      arr2 exists for [0 .. nblock-1 +N_OVERSHOOT]
-      ((UChar*)arr2)  [0 .. nblock-1] holds block
-      arr1 exists for [0 .. nblock-1]
-
-   Post:
-      ((UChar*)arr2) [0 .. nblock-1] holds block
-      All other areas of block destroyed
-      ftab [ 0 .. 65536 ] destroyed
-      arr1 [0 .. nblock-1] holds sorted order
-*/
-void BZ2_blockSort ( EState* s )
-{
-   UInt32* ptr    = s->ptr; 
-   UChar*  block  = s->block;
-   UInt32* ftab   = s->ftab;
-   Int32   nblock = s->nblock;
-   Int32   verb   = s->verbosity;
-   Int32   wfact  = s->workFactor;
-   UInt16* quadrant;
-   Int32   budget;
-   Int32   budgetInit;
-   Int32   i;
-
-   if (nblock < 10000) {
-      fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
-   } else {
-      /* Calculate the location for quadrant, remembering to get
-         the alignment right.  Assumes that &(block[0]) is at least
-         2-byte aligned -- this should be ok since block is really
-         the first section of arr2.
-      */
-      i = nblock+BZ_N_OVERSHOOT;
-      if (i & 1) i++;
-      quadrant = (UInt16*)(&(block[i]));
-
-      /* (wfact-1) / 3 puts the default-factor-30
-         transition point at very roughly the same place as 
-         with v0.1 and v0.9.0.  
-         Not that it particularly matters any more, since the
-         resulting compressed stream is now the same regardless
-         of whether or not we use the main sort or fallback sort.
-      */
-      if (wfact < 1  ) wfact = 1;
-      if (wfact > 100) wfact = 100;
-      budgetInit = nblock * ((wfact-1) / 3);
-      budget = budgetInit;
-
-      mainSort ( ptr, block, quadrant, ftab, nblock, verb, &budget );
-      if (verb >= 3) 
-         VPrintf3 ( "      %d work, %d block, ratio %5.2f\n",
-                    budgetInit - budget,
-                    nblock, 
-                    (float)(budgetInit - budget) /
-                    (float)(nblock==0 ? 1 : nblock) ); 
-      if (budget < 0) {
-         if (verb >= 2) 
-            VPrintf0 ( "    too repetitive; using fallback"
-                       " sorting algorithm\n" );
-         fallbackSort ( s->arr1, s->arr2, ftab, nblock, verb );
-      }
-   }
-
-   s->origPtr = -1;
-   for (i = 0; i < s->nblock; i++)
-      if (ptr[i] == 0)
-         { s->origPtr = i; break; };
-
-   AssertH( s->origPtr != -1, 1003 );
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                       blocksort.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib.c b/mdk-stage1/bzlib/bzlib.c
deleted file mode 100644
index b1fc85236..000000000
--- a/mdk-stage1/bzlib/bzlib.c
+++ /dev/null
@@ -1,1567 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Library top-level functions.                          ---*/
-/*---                                               bzlib.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-/*--
-   CHANGES
-   ~~~~~~~
-   0.9.0 -- original version.
-
-   0.9.0a/b -- no changes in this file.
-
-   0.9.0c
-      * made zero-length BZ_FLUSH work correctly in bzCompress().
-      * fixed bzWrite/bzRead to ignore zero-length requests.
-      * fixed bzread to correctly handle read requests after EOF.
-      * wrong parameter order in call to bzDecompressInit in
-        bzBuffToBuffDecompress.  Fixed.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-/*--- Compression stuff                           ---*/
-/*---------------------------------------------------*/
-
-
-/*---------------------------------------------------*/
-#ifndef BZ_NO_STDIO
-void BZ2_bz__AssertH__fail ( int errcode )
-{
-   fprintf(stderr, 
-      "\n\nbzip2/libbzip2: internal error number %d.\n"
-      "This is a bug in bzip2/libbzip2, %s.\n"
-      "Please report it to me at: jseward@acm.org.  If this happened\n"
-      "when you were using some program which uses libbzip2 as a\n"
-      "component, you should also report this bug to the author(s)\n"
-      "of that program.  Please make an effort to report this bug;\n"
-      "timely and accurate bug reports eventually lead to higher\n"
-      "quality software.  Thanks.  Julian Seward, 21 March 2000.\n\n",
-      errcode,
-      BZ2_bzlibVersion()
-   );
-   exit(3);
-}
-#endif
-
-
-/*---------------------------------------------------*/
-static
-int bz_config_ok ( void )
-{
-   if (sizeof(int)   != 4) return 0;
-   if (sizeof(short) != 2) return 0;
-   if (sizeof(char)  != 1) return 0;
-   return 1;
-}
-
-
-/*---------------------------------------------------*/
-static
-void* default_bzalloc ( void* opaque __attribute__ ((unused)), Int32 items, Int32 size )
-{
-   void* v = malloc ( items * size );
-   return v;
-}
-
-static
-void default_bzfree ( void* opaque __attribute__ ((unused)), void* addr )
-{
-   if (addr != NULL) free ( addr );
-}
-
-
-/*---------------------------------------------------*/
-static
-void prepare_new_block ( EState* s )
-{
-   Int32 i;
-   s->nblock = 0;
-   s->numZ = 0;
-   s->state_out_pos = 0;
-   BZ_INITIALISE_CRC ( s->blockCRC );
-   for (i = 0; i < 256; i++) s->inUse[i] = False;
-   s->blockNo++;
-}
-
-
-/*---------------------------------------------------*/
-static
-void init_RL ( EState* s )
-{
-   s->state_in_ch  = 256;
-   s->state_in_len = 0;
-}
-
-
-static
-Bool isempty_RL ( EState* s )
-{
-   if (s->state_in_ch < 256 && s->state_in_len > 0)
-      return False; else
-      return True;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressInit) 
-                    ( bz_stream* strm, 
-                     int        blockSize100k,
-                     int        verbosity,
-                     int        workFactor )
-{
-   Int32   n;
-   EState* s;
-
-   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
-   if (strm == NULL || 
-       blockSize100k < 1 || blockSize100k > 9 ||
-       workFactor < 0 || workFactor > 250)
-     return BZ_PARAM_ERROR;
-
-   if (workFactor == 0) workFactor = 30;
-   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
-   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
-   s = BZALLOC( sizeof(EState) );
-   if (s == NULL) return BZ_MEM_ERROR;
-   s->strm = strm;
-
-   s->arr1 = NULL;
-   s->arr2 = NULL;
-   s->ftab = NULL;
-
-   n       = 100000 * blockSize100k;
-   s->arr1 = BZALLOC( n                  * sizeof(UInt32) );
-   s->arr2 = BZALLOC( (n+BZ_N_OVERSHOOT) * sizeof(UInt32) );
-   s->ftab = BZALLOC( 65537              * sizeof(UInt32) );
-
-   if (s->arr1 == NULL || s->arr2 == NULL || s->ftab == NULL) {
-      if (s->arr1 != NULL) BZFREE(s->arr1);
-      if (s->arr2 != NULL) BZFREE(s->arr2);
-      if (s->ftab != NULL) BZFREE(s->ftab);
-      if (s       != NULL) BZFREE(s);
-      return BZ_MEM_ERROR;
-   }
-
-   s->blockNo           = 0;
-   s->state             = BZ_S_INPUT;
-   s->mode              = BZ_M_RUNNING;
-   s->combinedCRC       = 0;
-   s->blockSize100k     = blockSize100k;
-   s->nblockMAX         = 100000 * blockSize100k - 19;
-   s->verbosity         = verbosity;
-   s->workFactor        = workFactor;
-
-   s->block             = (UChar*)s->arr2;
-   s->mtfv              = (UInt16*)s->arr1;
-   s->zbits             = NULL;
-   s->ptr               = (UInt32*)s->arr1;
-
-   strm->state          = s;
-   strm->total_in_lo32  = 0;
-   strm->total_in_hi32  = 0;
-   strm->total_out_lo32 = 0;
-   strm->total_out_hi32 = 0;
-   init_RL ( s );
-   prepare_new_block ( s );
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void add_pair_to_block ( EState* s )
-{
-   Int32 i;
-   UChar ch = (UChar)(s->state_in_ch);
-   for (i = 0; i < s->state_in_len; i++) {
-      BZ_UPDATE_CRC( s->blockCRC, ch );
-   }
-   s->inUse[s->state_in_ch] = True;
-   switch (s->state_in_len) {
-      case 1:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      case 2:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      case 3:
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         break;
-      default:
-         s->inUse[s->state_in_len-4] = True;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = (UChar)ch; s->nblock++;
-         s->block[s->nblock] = ((UChar)(s->state_in_len-4));
-         s->nblock++;
-         break;
-   }
-}
-
-
-/*---------------------------------------------------*/
-static
-void flush_RL ( EState* s )
-{
-   if (s->state_in_ch < 256) add_pair_to_block ( s );
-   init_RL ( s );
-}
-
-
-/*---------------------------------------------------*/
-#define ADD_CHAR_TO_BLOCK(zs,zchh0)               \
-{                                                 \
-   UInt32 zchh = (UInt32)(zchh0);                 \
-   /*-- fast track the common case --*/           \
-   if (zchh != zs->state_in_ch &&                 \
-       zs->state_in_len == 1) {                   \
-      UChar ch = (UChar)(zs->state_in_ch);        \
-      BZ_UPDATE_CRC( zs->blockCRC, ch );          \
-      zs->inUse[zs->state_in_ch] = True;          \
-      zs->block[zs->nblock] = (UChar)ch;          \
-      zs->nblock++;                               \
-      zs->state_in_ch = zchh;                     \
-   }                                              \
-   else                                           \
-   /*-- general, uncommon cases --*/              \
-   if (zchh != zs->state_in_ch ||                 \
-      zs->state_in_len == 255) {                  \
-      if (zs->state_in_ch < 256)                  \
-         add_pair_to_block ( zs );                \
-      zs->state_in_ch = zchh;                     \
-      zs->state_in_len = 1;                       \
-   } else {                                       \
-      zs->state_in_len++;                         \
-   }                                              \
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_input_until_stop ( EState* s )
-{
-   Bool progress_in = False;
-
-   if (s->mode == BZ_M_RUNNING) {
-
-      /*-- fast track the common case --*/
-      while (True) {
-         /*-- block full? --*/
-         if (s->nblock >= s->nblockMAX) break;
-         /*-- no input? --*/
-         if (s->strm->avail_in == 0) break;
-         progress_in = True;
-         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
-         s->strm->next_in++;
-         s->strm->avail_in--;
-         s->strm->total_in_lo32++;
-         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
-      }
-
-   } else {
-
-      /*-- general, uncommon case --*/
-      while (True) {
-         /*-- block full? --*/
-         if (s->nblock >= s->nblockMAX) break;
-         /*-- no input? --*/
-         if (s->strm->avail_in == 0) break;
-         /*-- flush/finish end? --*/
-         if (s->avail_in_expect == 0) break;
-         progress_in = True;
-         ADD_CHAR_TO_BLOCK ( s, (UInt32)(*((UChar*)(s->strm->next_in))) ); 
-         s->strm->next_in++;
-         s->strm->avail_in--;
-         s->strm->total_in_lo32++;
-         if (s->strm->total_in_lo32 == 0) s->strm->total_in_hi32++;
-         s->avail_in_expect--;
-      }
-   }
-   return progress_in;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool copy_output_until_stop ( EState* s )
-{
-   Bool progress_out = False;
-
-   while (True) {
-
-      /*-- no output space? --*/
-      if (s->strm->avail_out == 0) break;
-
-      /*-- block done? --*/
-      if (s->state_out_pos >= s->numZ) break;
-
-      progress_out = True;
-      *(s->strm->next_out) = s->zbits[s->state_out_pos];
-      s->state_out_pos++;
-      s->strm->avail_out--;
-      s->strm->next_out++;
-      s->strm->total_out_lo32++;
-      if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-   }
-
-   return progress_out;
-}
-
-
-/*---------------------------------------------------*/
-static
-Bool handle_compress ( bz_stream* strm )
-{
-   Bool progress_in  = False;
-   Bool progress_out = False;
-   EState* s = strm->state;
-   
-   while (True) {
-
-      if (s->state == BZ_S_OUTPUT) {
-         progress_out |= copy_output_until_stop ( s );
-         if (s->state_out_pos < s->numZ) break;
-         if (s->mode == BZ_M_FINISHING && 
-             s->avail_in_expect == 0 &&
-             isempty_RL(s)) break;
-         prepare_new_block ( s );
-         s->state = BZ_S_INPUT;
-         if (s->mode == BZ_M_FLUSHING && 
-             s->avail_in_expect == 0 &&
-             isempty_RL(s)) break;
-      }
-
-      if (s->state == BZ_S_INPUT) {
-         progress_in |= copy_input_until_stop ( s );
-         if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
-            flush_RL ( s );
-            BZ2_compressBlock ( s, (Bool)(s->mode == BZ_M_FINISHING) );
-            s->state = BZ_S_OUTPUT;
-         }
-         else
-         if (s->nblock >= s->nblockMAX) {
-            BZ2_compressBlock ( s, False );
-            s->state = BZ_S_OUTPUT;
-         }
-         else
-         if (s->strm->avail_in == 0) {
-            break;
-         }
-      }
-
-   }
-
-   return progress_in || progress_out;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompress) ( bz_stream *strm, int action )
-{
-   Bool progress;
-   EState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   preswitch:
-   switch (s->mode) {
-
-      case BZ_M_IDLE:
-         return BZ_SEQUENCE_ERROR;
-
-      case BZ_M_RUNNING:
-         if (action == BZ_RUN) {
-            progress = handle_compress ( strm );
-            return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;
-         } 
-         else
-	 if (action == BZ_FLUSH) {
-            s->avail_in_expect = strm->avail_in;
-            s->mode = BZ_M_FLUSHING;
-            goto preswitch;
-         }
-         else
-         if (action == BZ_FINISH) {
-            s->avail_in_expect = strm->avail_in;
-            s->mode = BZ_M_FINISHING;
-            goto preswitch;
-         }
-         else 
-            return BZ_PARAM_ERROR;
-
-      case BZ_M_FLUSHING:
-         if (action != BZ_FLUSH) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect != s->strm->avail_in) 
-            return BZ_SEQUENCE_ERROR;
-         progress = handle_compress ( strm );
-         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
-             s->state_out_pos < s->numZ) return BZ_FLUSH_OK;
-         s->mode = BZ_M_RUNNING;
-         return BZ_RUN_OK;
-
-      case BZ_M_FINISHING:
-         if (action != BZ_FINISH) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect != s->strm->avail_in) 
-            return BZ_SEQUENCE_ERROR;
-         progress = handle_compress ( strm );
-         if (!progress) return BZ_SEQUENCE_ERROR;
-         if (s->avail_in_expect > 0 || !isempty_RL(s) ||
-             s->state_out_pos < s->numZ) return BZ_FINISH_OK;
-         s->mode = BZ_M_IDLE;
-         return BZ_STREAM_END;
-   }
-   return BZ_OK; /*--not reached--*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzCompressEnd)  ( bz_stream *strm )
-{
-   EState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   if (s->arr1 != NULL) BZFREE(s->arr1);
-   if (s->arr2 != NULL) BZFREE(s->arr2);
-   if (s->ftab != NULL) BZFREE(s->ftab);
-   BZFREE(strm->state);
-
-   strm->state = NULL;   
-
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-/*--- Decompression stuff                         ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressInit) 
-                     ( bz_stream* strm, 
-                       int        verbosity,
-                       int        small )
-{
-   DState* s;
-
-   if (!bz_config_ok()) return BZ_CONFIG_ERROR;
-
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   if (small != 0 && small != 1) return BZ_PARAM_ERROR;
-   if (verbosity < 0 || verbosity > 4) return BZ_PARAM_ERROR;
-
-   if (strm->bzalloc == NULL) strm->bzalloc = default_bzalloc;
-   if (strm->bzfree == NULL) strm->bzfree = default_bzfree;
-
-   s = BZALLOC( sizeof(DState) );
-   if (s == NULL) return BZ_MEM_ERROR;
-   s->strm                  = strm;
-   strm->state              = s;
-   s->state                 = BZ_X_MAGIC_1;
-   s->bsLive                = 0;
-   s->bsBuff                = 0;
-   s->calculatedCombinedCRC = 0;
-   strm->total_in_lo32      = 0;
-   strm->total_in_hi32      = 0;
-   strm->total_out_lo32     = 0;
-   strm->total_out_hi32     = 0;
-   s->smallDecompress       = (Bool)small;
-   s->ll4                   = NULL;
-   s->ll16                  = NULL;
-   s->tt                    = NULL;
-   s->currBlockNo           = 0;
-   s->verbosity             = verbosity;
-
-   return BZ_OK;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_FAST ( DState* s )
-{
-   UChar k1;
-
-   if (s->blockRandomised) {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-               
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_FAST(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_FAST(s->k0); BZ_RAND_UPD_MASK; 
-         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
-      }
-
-   } else {
-
-      /* restore */
-      UInt32        c_calculatedBlockCRC = s->calculatedBlockCRC;
-      UChar         c_state_out_ch       = s->state_out_ch;
-      Int32         c_state_out_len      = s->state_out_len;
-      Int32         c_nblock_used        = s->nblock_used;
-      Int32         c_k0                 = s->k0;
-      UInt32*       c_tt                 = s->tt;
-      UInt32        c_tPos               = s->tPos;
-      char*         cs_next_out          = s->strm->next_out;
-      unsigned int  cs_avail_out         = s->strm->avail_out;
-      /* end restore */
-
-      UInt32       avail_out_INIT = cs_avail_out;
-      Int32        s_save_nblockPP = s->save_nblock+1;
-      unsigned int total_out_lo32_old;
-
-      while (True) {
-
-         /* try to finish existing run */
-         if (c_state_out_len > 0) {
-            while (True) {
-               if (cs_avail_out == 0) goto return_notr;
-               if (c_state_out_len == 1) break;
-               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
-               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
-               c_state_out_len--;
-               cs_next_out++;
-               cs_avail_out--;
-            }
-            s_state_out_len_eq_one:
-            {
-               if (cs_avail_out == 0) { 
-                  c_state_out_len = 1; goto return_notr;
-               };
-               *( (UChar*)(cs_next_out) ) = c_state_out_ch;
-               BZ_UPDATE_CRC ( c_calculatedBlockCRC, c_state_out_ch );
-               cs_next_out++;
-               cs_avail_out--;
-            }
-         }   
-         /* can a new run be started? */
-         if (c_nblock_used == s_save_nblockPP) {
-            c_state_out_len = 0; goto return_notr;
-         };   
-         c_state_out_ch = c_k0;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (k1 != c_k0) { 
-            c_k0 = k1; goto s_state_out_len_eq_one; 
-         };
-         if (c_nblock_used == s_save_nblockPP) 
-            goto s_state_out_len_eq_one;
-   
-         c_state_out_len = 2;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (c_nblock_used == s_save_nblockPP) continue;
-         if (k1 != c_k0) { c_k0 = k1; continue; };
-   
-         c_state_out_len = 3;
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         if (c_nblock_used == s_save_nblockPP) continue;
-         if (k1 != c_k0) { c_k0 = k1; continue; };
-   
-         BZ_GET_FAST_C(k1); c_nblock_used++;
-         c_state_out_len = ((Int32)k1) + 4;
-         BZ_GET_FAST_C(c_k0); c_nblock_used++;
-      }
-
-      return_notr:
-      total_out_lo32_old = s->strm->total_out_lo32;
-      s->strm->total_out_lo32 += (avail_out_INIT - cs_avail_out);
-      if (s->strm->total_out_lo32 < total_out_lo32_old)
-         s->strm->total_out_hi32++;
-
-      /* save */
-      s->calculatedBlockCRC = c_calculatedBlockCRC;
-      s->state_out_ch       = c_state_out_ch;
-      s->state_out_len      = c_state_out_len;
-      s->nblock_used        = c_nblock_used;
-      s->k0                 = c_k0;
-      s->tt                 = c_tt;
-      s->tPos               = c_tPos;
-      s->strm->next_out     = cs_next_out;
-      s->strm->avail_out    = cs_avail_out;
-      /* end save */
-   }
-}
-
-
-
-/*---------------------------------------------------*/
-__inline__ Int32 BZ2_indexIntoF ( Int32 indx, Int32 *cftab )
-{
-   Int32 nb, na, mid;
-   nb = 0;
-   na = 256;
-   do {
-      mid = (nb + na) >> 1;
-      if (indx >= cftab[mid]) nb = mid; else na = mid;
-   }
-   while (na - nb != 1);
-   return nb;
-}
-
-
-/*---------------------------------------------------*/
-static
-void unRLE_obuf_to_output_SMALL ( DState* s )
-{
-   UChar k1;
-
-   if (s->blockRandomised) {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-               
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_SMALL(k1); BZ_RAND_UPD_MASK; 
-         k1 ^= BZ_RAND_MASK; s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_SMALL(s->k0); BZ_RAND_UPD_MASK; 
-         s->k0 ^= BZ_RAND_MASK; s->nblock_used++;
-      }
-
-   } else {
-
-      while (True) {
-         /* try to finish existing run */
-         while (True) {
-            if (s->strm->avail_out == 0) return;
-            if (s->state_out_len == 0) break;
-            *( (UChar*)(s->strm->next_out) ) = s->state_out_ch;
-            BZ_UPDATE_CRC ( s->calculatedBlockCRC, s->state_out_ch );
-            s->state_out_len--;
-            s->strm->next_out++;
-            s->strm->avail_out--;
-            s->strm->total_out_lo32++;
-            if (s->strm->total_out_lo32 == 0) s->strm->total_out_hi32++;
-         }
-   
-         /* can a new run be started? */
-         if (s->nblock_used == s->save_nblock+1) return;
-   
-         s->state_out_len = 1;
-         s->state_out_ch = s->k0;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 2;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         s->state_out_len = 3;
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         if (s->nblock_used == s->save_nblock+1) continue;
-         if (k1 != s->k0) { s->k0 = k1; continue; };
-   
-         BZ_GET_SMALL(k1); s->nblock_used++;
-         s->state_out_len = ((Int32)k1) + 4;
-         BZ_GET_SMALL(s->k0); s->nblock_used++;
-      }
-
-   }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompress) ( bz_stream *strm )
-{
-   DState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   while (True) {
-      if (s->state == BZ_X_IDLE) return BZ_SEQUENCE_ERROR;
-      if (s->state == BZ_X_OUTPUT) {
-         if (s->smallDecompress)
-            unRLE_obuf_to_output_SMALL ( s ); else
-            unRLE_obuf_to_output_FAST  ( s );
-         if (s->nblock_used == s->save_nblock+1 && s->state_out_len == 0) {
-            BZ_FINALISE_CRC ( s->calculatedBlockCRC );
-            if (s->verbosity >= 3) 
-               VPrintf2 ( " {0x%x, 0x%x}", s->storedBlockCRC, 
-                          s->calculatedBlockCRC );
-            if (s->verbosity >= 2) VPrintf0 ( "]" );
-            if (s->calculatedBlockCRC != s->storedBlockCRC)
-               return BZ_DATA_ERROR;
-            s->calculatedCombinedCRC 
-               = (s->calculatedCombinedCRC << 1) | 
-                    (s->calculatedCombinedCRC >> 31);
-            s->calculatedCombinedCRC ^= s->calculatedBlockCRC;
-            s->state = BZ_X_BLKHDR_1;
-         } else {
-            return BZ_OK;
-         }
-      }
-      if (s->state >= BZ_X_MAGIC_1) {
-         Int32 r = BZ2_decompress ( s );
-         if (r == BZ_STREAM_END) {
-            if (s->verbosity >= 3)
-               VPrintf2 ( "\n    combined CRCs: stored = 0x%x, computed = 0x%x", 
-                          s->storedCombinedCRC, s->calculatedCombinedCRC );
-            if (s->calculatedCombinedCRC != s->storedCombinedCRC)
-               return BZ_DATA_ERROR;
-            return r;
-         }
-         if (s->state != BZ_X_OUTPUT) return r;
-      }
-   }
-
-   AssertH ( 0, 6001 );
-
-   return 0;  /*NOTREACHED*/
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzDecompressEnd)  ( bz_stream *strm )
-{
-   DState* s;
-   if (strm == NULL) return BZ_PARAM_ERROR;
-   s = strm->state;
-   if (s == NULL) return BZ_PARAM_ERROR;
-   if (s->strm != strm) return BZ_PARAM_ERROR;
-
-   if (s->tt   != NULL) BZFREE(s->tt);
-   if (s->ll16 != NULL) BZFREE(s->ll16);
-   if (s->ll4  != NULL) BZFREE(s->ll4);
-
-   BZFREE(strm->state);
-   strm->state = NULL;
-
-   return BZ_OK;
-}
-
-
-#ifndef BZ_NO_STDIO
-/*---------------------------------------------------*/
-/*--- File I/O stuff                              ---*/
-/*---------------------------------------------------*/
-
-#define BZ_SETERR(eee)                    \
-{                                         \
-   if (bzerror != NULL) *bzerror = eee;   \
-   if (bzf != NULL) bzf->lastErr = eee;   \
-}
-
-typedef 
-   struct {
-      FILE*     handle;
-      Char      buf[BZ_MAX_UNUSED];
-      Int32     bufN;
-      Bool      writing;
-      bz_stream strm;
-      Int32     lastErr;
-      Bool      initialisedOk;
-   }
-   bzFile;
-
-
-/*---------------------------------------------*/
-static Bool myfeof ( FILE* f )
-{
-	return feof(f) ? True : False;
-}
-
-
-/*---------------------------------------------------*/
-BZFILE* BZ_API(BZ2_bzWriteOpen) 
-                    ( int*  bzerror,      
-                      FILE* f, 
-                      int   blockSize100k, 
-                      int   verbosity,
-                      int   workFactor )
-{
-   Int32   ret;
-   bzFile* bzf = NULL;
-
-   BZ_SETERR(BZ_OK);
-
-   if (f == NULL ||
-       (blockSize100k < 1 || blockSize100k > 9) ||
-       (workFactor < 0 || workFactor > 250) ||
-       (verbosity < 0 || verbosity > 4))
-      { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
-
-   if (ferror(f))
-      { BZ_SETERR(BZ_IO_ERROR); return NULL; };
-
-   bzf = malloc ( sizeof(bzFile) );
-   if (bzf == NULL)
-      { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
-
-   BZ_SETERR(BZ_OK);
-   bzf->initialisedOk = False;
-   bzf->bufN          = 0;
-   bzf->handle        = f;
-   bzf->writing       = True;
-   bzf->strm.bzalloc  = NULL;
-   bzf->strm.bzfree   = NULL;
-   bzf->strm.opaque   = NULL;
-
-   if (workFactor == 0) workFactor = 30;
-   ret = BZ2_bzCompressInit ( &(bzf->strm), blockSize100k, 
-                              verbosity, workFactor );
-   if (ret != BZ_OK)
-      { BZ_SETERR(ret); free(bzf); return NULL; };
-
-   bzf->strm.avail_in = 0;
-   bzf->initialisedOk = True;
-   return bzf;   
-}
-
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzWrite)
-             ( int*    bzerror, 
-               BZFILE* b, 
-               void*   buf, 
-               int     len )
-{
-   Int32 n, n2, ret;
-   bzFile* bzf = (bzFile*)b;
-
-   BZ_SETERR(BZ_OK);
-   if (bzf == NULL || buf == NULL || len < 0)
-      { BZ_SETERR(BZ_PARAM_ERROR); return; };
-   if (!(bzf->writing))
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-   if (ferror(bzf->handle))
-      { BZ_SETERR(BZ_IO_ERROR); return; };
-
-   if (len == 0)
-      { BZ_SETERR(BZ_OK); return; };
-
-   bzf->strm.avail_in = len;
-   bzf->strm.next_in  = buf;
-
-   while (True) {
-      bzf->strm.avail_out = BZ_MAX_UNUSED;
-      bzf->strm.next_out = bzf->buf;
-      ret = BZ2_bzCompress ( &(bzf->strm), BZ_RUN );
-      if (ret != BZ_RUN_OK)
-         { BZ_SETERR(ret); return; };
-
-      if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
-         n = BZ_MAX_UNUSED - bzf->strm.avail_out;
-         n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
-                       n, bzf->handle );
-         if (n != n2 || ferror(bzf->handle))
-            { BZ_SETERR(BZ_IO_ERROR); return; };
-      }
-
-      if (bzf->strm.avail_in == 0)
-         { BZ_SETERR(BZ_OK); return; };
-   }
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzWriteClose)
-                  ( int*          bzerror, 
-                    BZFILE*       b, 
-                    int           abandon,
-                    unsigned int* nbytes_in,
-                    unsigned int* nbytes_out )
-{
-   BZ2_bzWriteClose64 ( bzerror, b, abandon, 
-                        nbytes_in, NULL, nbytes_out, NULL );
-}
-
-
-void BZ_API(BZ2_bzWriteClose64)
-                  ( int*          bzerror, 
-                    BZFILE*       b, 
-                    int           abandon,
-                    unsigned int* nbytes_in_lo32,
-                    unsigned int* nbytes_in_hi32,
-                    unsigned int* nbytes_out_lo32,
-                    unsigned int* nbytes_out_hi32 )
-{
-   Int32   n, n2, ret;
-   bzFile* bzf = (bzFile*)b;
-
-   if (bzf == NULL)
-      { BZ_SETERR(BZ_OK); return; };
-   if (!(bzf->writing))
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-   if (ferror(bzf->handle))
-      { BZ_SETERR(BZ_IO_ERROR); return; };
-
-   if (nbytes_in_lo32 != NULL) *nbytes_in_lo32 = 0;
-   if (nbytes_in_hi32 != NULL) *nbytes_in_hi32 = 0;
-   if (nbytes_out_lo32 != NULL) *nbytes_out_lo32 = 0;
-   if (nbytes_out_hi32 != NULL) *nbytes_out_hi32 = 0;
-
-   if ((!abandon) && bzf->lastErr == BZ_OK) {
-      while (True) {
-         bzf->strm.avail_out = BZ_MAX_UNUSED;
-         bzf->strm.next_out = bzf->buf;
-         ret = BZ2_bzCompress ( &(bzf->strm), BZ_FINISH );
-         if (ret != BZ_FINISH_OK && ret != BZ_STREAM_END)
-            { BZ_SETERR(ret); return; };
-
-         if (bzf->strm.avail_out < BZ_MAX_UNUSED) {
-            n = BZ_MAX_UNUSED - bzf->strm.avail_out;
-            n2 = fwrite ( (void*)(bzf->buf), sizeof(UChar), 
-                          n, bzf->handle );
-            if (n != n2 || ferror(bzf->handle))
-               { BZ_SETERR(BZ_IO_ERROR); return; };
-         }
-
-         if (ret == BZ_STREAM_END) break;
-      }
-   }
-
-   if ( !abandon && !ferror ( bzf->handle ) ) {
-      fflush ( bzf->handle );
-      if (ferror(bzf->handle))
-         { BZ_SETERR(BZ_IO_ERROR); return; };
-   }
-
-   if (nbytes_in_lo32 != NULL)
-      *nbytes_in_lo32 = bzf->strm.total_in_lo32;
-   if (nbytes_in_hi32 != NULL)
-      *nbytes_in_hi32 = bzf->strm.total_in_hi32;
-   if (nbytes_out_lo32 != NULL)
-      *nbytes_out_lo32 = bzf->strm.total_out_lo32;
-   if (nbytes_out_hi32 != NULL)
-      *nbytes_out_hi32 = bzf->strm.total_out_hi32;
-
-   BZ_SETERR(BZ_OK);
-   BZ2_bzCompressEnd ( &(bzf->strm) );
-   free ( bzf );
-}
-
-
-/*---------------------------------------------------*/
-BZFILE* BZ_API(BZ2_bzReadOpen) 
-                   ( int*  bzerror, 
-                     FILE* f, 
-                     int   verbosity,
-                     int   small,
-                     void* unused,
-                     int   nUnused )
-{
-   bzFile* bzf = NULL;
-   int     ret;
-
-   BZ_SETERR(BZ_OK);
-
-   if (f == NULL || 
-       (small != 0 && small != 1) ||
-       (verbosity < 0 || verbosity > 4) ||
-       (unused == NULL && nUnused != 0) ||
-       (unused != NULL && (nUnused < 0 || nUnused > BZ_MAX_UNUSED)))
-      { BZ_SETERR(BZ_PARAM_ERROR); return NULL; };
-
-   if (ferror(f))
-      { BZ_SETERR(BZ_IO_ERROR); return NULL; };
-
-   bzf = malloc ( sizeof(bzFile) );
-   if (bzf == NULL) 
-      { BZ_SETERR(BZ_MEM_ERROR); return NULL; };
-
-   BZ_SETERR(BZ_OK);
-
-   bzf->initialisedOk = False;
-   bzf->handle        = f;
-   bzf->bufN          = 0;
-   bzf->writing       = False;
-   bzf->strm.bzalloc  = NULL;
-   bzf->strm.bzfree   = NULL;
-   bzf->strm.opaque   = NULL;
-   
-   while (nUnused > 0) {
-      bzf->buf[bzf->bufN] = *((UChar*)(unused)); bzf->bufN++;
-      unused = ((void*)( 1 + ((UChar*)(unused))  ));
-      nUnused--;
-   }
-
-   ret = BZ2_bzDecompressInit ( &(bzf->strm), verbosity, small );
-   if (ret != BZ_OK)
-      { BZ_SETERR(ret); free(bzf); return NULL; };
-
-   bzf->strm.avail_in = bzf->bufN;
-   bzf->strm.next_in  = bzf->buf;
-
-   bzf->initialisedOk = True;
-   return bzf;   
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzReadClose) ( int *bzerror, BZFILE *b )
-{
-   bzFile* bzf = (bzFile*)b;
-
-   BZ_SETERR(BZ_OK);
-   if (bzf == NULL)
-      { BZ_SETERR(BZ_OK); return; };
-
-   if (bzf->writing)
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-
-   if (bzf->initialisedOk)
-      (void)BZ2_bzDecompressEnd ( &(bzf->strm) );
-   free ( bzf );
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzRead) 
-           ( int*    bzerror, 
-             BZFILE* b, 
-             void*   buf, 
-             int     len )
-{
-   Int32   n, ret;
-   bzFile* bzf = (bzFile*)b;
-
-   BZ_SETERR(BZ_OK);
-
-   if (bzf == NULL || buf == NULL || len < 0)
-      { BZ_SETERR(BZ_PARAM_ERROR); return 0; };
-
-   if (bzf->writing)
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return 0; };
-
-   if (len == 0)
-      { BZ_SETERR(BZ_OK); return 0; };
-
-   bzf->strm.avail_out = len;
-   bzf->strm.next_out = buf;
-
-   while (True) {
-
-      if (ferror(bzf->handle)) 
-         { BZ_SETERR(BZ_IO_ERROR); return 0; };
-
-      if (bzf->strm.avail_in == 0 && !myfeof(bzf->handle)) {
-         n = fread ( bzf->buf, sizeof(UChar), 
-                     BZ_MAX_UNUSED, bzf->handle );
-         if (ferror(bzf->handle))
-            { BZ_SETERR(BZ_IO_ERROR); return 0; };
-         bzf->bufN = n;
-         bzf->strm.avail_in = bzf->bufN;
-         bzf->strm.next_in = bzf->buf;
-      }
-
-      ret = BZ2_bzDecompress ( &(bzf->strm) );
-
-      if (ret != BZ_OK && ret != BZ_STREAM_END)
-         { BZ_SETERR(ret); return 0; };
-
-      if (ret == BZ_OK && myfeof(bzf->handle) && 
-          bzf->strm.avail_in == 0 && bzf->strm.avail_out > 0)
-         { BZ_SETERR(BZ_UNEXPECTED_EOF); return 0; };
-
-      if (ret == BZ_STREAM_END)
-         { BZ_SETERR(BZ_STREAM_END);
-           return len - bzf->strm.avail_out; };
-      if (bzf->strm.avail_out == 0)
-         { BZ_SETERR(BZ_OK); return len; };
-      
-   }
-
-   return 0; /*not reached*/
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzReadGetUnused) 
-                     ( int*    bzerror, 
-                       BZFILE* b, 
-                       void**  unused, 
-                       int*    nUnused )
-{
-   bzFile* bzf = (bzFile*)b;
-   if (bzf == NULL)
-      { BZ_SETERR(BZ_PARAM_ERROR); return; };
-   if (bzf->lastErr != BZ_STREAM_END)
-      { BZ_SETERR(BZ_SEQUENCE_ERROR); return; };
-   if (unused == NULL || nUnused == NULL)
-      { BZ_SETERR(BZ_PARAM_ERROR); return; };
-
-   BZ_SETERR(BZ_OK);
-   *nUnused = bzf->strm.avail_in;
-   *unused = bzf->strm.next_in;
-}
-#endif
-
-
-/*---------------------------------------------------*/
-/*--- Misc convenience stuff                      ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzBuffToBuffCompress) 
-                         ( char*         dest, 
-                           unsigned int* destLen,
-                           char*         source, 
-                           unsigned int  sourceLen,
-                           int           blockSize100k, 
-                           int           verbosity, 
-                           int           workFactor )
-{
-   bz_stream strm;
-   int ret;
-
-   if (dest == NULL || destLen == NULL || 
-       source == NULL ||
-       blockSize100k < 1 || blockSize100k > 9 ||
-       verbosity < 0 || verbosity > 4 ||
-       workFactor < 0 || workFactor > 250) 
-      return BZ_PARAM_ERROR;
-
-   if (workFactor == 0) workFactor = 30;
-   strm.bzalloc = NULL;
-   strm.bzfree = NULL;
-   strm.opaque = NULL;
-   ret = BZ2_bzCompressInit ( &strm, blockSize100k, 
-                              verbosity, workFactor );
-   if (ret != BZ_OK) return ret;
-
-   strm.next_in = source;
-   strm.next_out = dest;
-   strm.avail_in = sourceLen;
-   strm.avail_out = *destLen;
-
-   ret = BZ2_bzCompress ( &strm, BZ_FINISH );
-   if (ret == BZ_FINISH_OK) goto output_overflow;
-   if (ret != BZ_STREAM_END) goto errhandler;
-
-   /* normal termination */
-   *destLen -= strm.avail_out;   
-   BZ2_bzCompressEnd ( &strm );
-   return BZ_OK;
-
-   output_overflow:
-   BZ2_bzCompressEnd ( &strm );
-   return BZ_OUTBUFF_FULL;
-
-   errhandler:
-   BZ2_bzCompressEnd ( &strm );
-   return ret;
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzBuffToBuffDecompress) 
-                           ( char*         dest, 
-                             unsigned int* destLen,
-                             char*         source, 
-                             unsigned int  sourceLen,
-                             int           small,
-                             int           verbosity )
-{
-   bz_stream strm;
-   int ret;
-
-   if (dest == NULL || destLen == NULL || 
-       source == NULL ||
-       (small != 0 && small != 1) ||
-       verbosity < 0 || verbosity > 4) 
-          return BZ_PARAM_ERROR;
-
-   strm.bzalloc = NULL;
-   strm.bzfree = NULL;
-   strm.opaque = NULL;
-   ret = BZ2_bzDecompressInit ( &strm, verbosity, small );
-   if (ret != BZ_OK) return ret;
-
-   strm.next_in = source;
-   strm.next_out = dest;
-   strm.avail_in = sourceLen;
-   strm.avail_out = *destLen;
-
-   ret = BZ2_bzDecompress ( &strm );
-   if (ret == BZ_OK) goto output_overflow_or_eof;
-   if (ret != BZ_STREAM_END) goto errhandler;
-
-   /* normal termination */
-   *destLen -= strm.avail_out;
-   BZ2_bzDecompressEnd ( &strm );
-   return BZ_OK;
-
-   output_overflow_or_eof:
-   if (strm.avail_out > 0) {
-      BZ2_bzDecompressEnd ( &strm );
-      return BZ_UNEXPECTED_EOF;
-   } else {
-      BZ2_bzDecompressEnd ( &strm );
-      return BZ_OUTBUFF_FULL;
-   };      
-
-   errhandler:
-   BZ2_bzDecompressEnd ( &strm );
-   return ret; 
-}
-
-
-/*---------------------------------------------------*/
-/*--
-   Code contributed by Yoshioka Tsuneo
-   (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
-   to support better zlib compatibility.
-   This code is not _officially_ part of libbzip2 (yet);
-   I haven't tested it, documented it, or considered the
-   threading-safeness of it.
-   If this code breaks, please contact both Yoshioka and me.
---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-/*--
-   return version like "0.9.0c".
---*/
-const char * BZ_API(BZ2_bzlibVersion)(void)
-{
-   return BZ_VERSION;
-}
-
-
-#ifndef BZ_NO_STDIO
-/*---------------------------------------------------*/
-
-#if defined(_WIN32) || defined(OS2) || defined(MSDOS)
-#   include <fcntl.h>
-#   include <io.h>
-#   define SET_BINARY_MODE(file) setmode(fileno(file),O_BINARY)
-#else
-#   define SET_BINARY_MODE(file)
-#endif
-static
-BZFILE * bzopen_or_bzdopen
-               ( const char *path,   /* no use when bzdopen */
-                 int fd,             /* no use when bzdopen */
-                 const char *mode,
-                 int open_mode)      /* bzopen: 0, bzdopen:1 */
-{
-   int    bzerr;
-   char   unused[BZ_MAX_UNUSED];
-   int    blockSize100k = 9;
-   int    writing       = 0;
-   char   mode2[10]     = "";
-   FILE   *fp           = NULL;
-   BZFILE *bzfp         = NULL;
-   int    verbosity     = 0;
-   int    workFactor    = 30;
-   int    smallMode     = 0;
-   int    nUnused       = 0; 
-
-   if (mode == NULL) return NULL;
-   while (*mode) {
-      switch (*mode) {
-      case 'r':
-         writing = 0; break;
-      case 'w':
-         writing = 1; break;
-      case 's':
-         smallMode = 1; break;
-      default:
-         if (isdigit((int)(*mode))) {
-            blockSize100k = *mode-'0';
-         }
-      }
-      mode++;
-   }
-   strcat(mode2, writing ? "w" : "r" );
-   strcat(mode2,"b");   /* binary mode */
-
-   if (open_mode==0) {
-      if (path==NULL || strcmp(path,"")==0) {
-        fp = (writing ? stdout : stdin);
-        SET_BINARY_MODE(fp);
-      } else {
-        fp = fopen(path,mode2);
-      }
-   } else {
-#ifdef BZ_STRICT_ANSI
-      fp = NULL;
-#else
-      fp = fdopen(fd,mode2);
-#endif
-   }
-   if (fp == NULL) return NULL;
-
-   if (writing) {
-      /* Guard against total chaos and anarchy -- JRS */
-      if (blockSize100k < 1) blockSize100k = 1;
-      if (blockSize100k > 9) blockSize100k = 9; 
-      bzfp = BZ2_bzWriteOpen(&bzerr,fp,blockSize100k,
-                             verbosity,workFactor);
-   } else {
-      bzfp = BZ2_bzReadOpen(&bzerr,fp,verbosity,smallMode,
-                            unused,nUnused);
-   }
-   if (bzfp == NULL) {
-      if (fp != stdin && fp != stdout) fclose(fp);
-      return NULL;
-   }
-   return bzfp;
-}
-
-
-/*---------------------------------------------------*/
-/*--
-   open file for read or write.
-      ex) bzopen("file","w9")
-      case path="" or NULL => use stdin or stdout.
---*/
-BZFILE * BZ_API(BZ2_bzopen)
-               ( const char *path,
-                 const char *mode )
-{
-   return bzopen_or_bzdopen(path,-1,mode,/*bzopen*/0);
-}
-
-
-/*---------------------------------------------------*/
-BZFILE * BZ_API(BZ2_bzdopen)
-               ( int fd,
-                 const char *mode )
-{
-   return bzopen_or_bzdopen(NULL,fd,mode,/*bzdopen*/1);
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzread) (BZFILE* b, void* buf, int len )
-{
-   int bzerr, nread;
-   if (((bzFile*)b)->lastErr == BZ_STREAM_END) return 0;
-   nread = BZ2_bzRead(&bzerr,b,buf,len);
-   if (bzerr == BZ_OK || bzerr == BZ_STREAM_END) {
-      return nread;
-   } else {
-      return -1;
-   }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzwrite) (BZFILE* b, void* buf, int len )
-{
-   int bzerr;
-
-   BZ2_bzWrite(&bzerr,b,buf,len);
-   if(bzerr == BZ_OK){
-      return len;
-   }else{
-      return -1;
-   }
-}
-
-
-/*---------------------------------------------------*/
-int BZ_API(BZ2_bzflush) (BZFILE *b __attribute__ ((unused)))
-{
-   /* do nothing now... */
-   return 0;
-}
-
-
-/*---------------------------------------------------*/
-void BZ_API(BZ2_bzclose) (BZFILE* b)
-{
-   int bzerr;
-   FILE *fp = ((bzFile *)b)->handle;
-   
-   if (b==NULL) {return;}
-   if(((bzFile*)b)->writing){
-      BZ2_bzWriteClose(&bzerr,b,0,NULL,NULL);
-      if(bzerr != BZ_OK){
-         BZ2_bzWriteClose(NULL,b,1,NULL,NULL);
-      }
-   }else{
-      BZ2_bzReadClose(&bzerr,b);
-   }
-   if(fp!=stdin && fp!=stdout){
-      fclose(fp);
-   }
-}
-
-
-/*---------------------------------------------------*/
-/*--
-   return last error code 
---*/
-static char *bzerrorstrings[] = {
-       "OK"
-      ,"SEQUENCE_ERROR"
-      ,"PARAM_ERROR"
-      ,"MEM_ERROR"
-      ,"DATA_ERROR"
-      ,"DATA_ERROR_MAGIC"
-      ,"IO_ERROR"
-      ,"UNEXPECTED_EOF"
-      ,"OUTBUFF_FULL"
-      ,"CONFIG_ERROR"
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-      ,"???"   /* for future */
-};
-
-
-const char * BZ_API(BZ2_bzerror) (BZFILE *b, int *errnum)
-{
-   int err = ((bzFile *)b)->lastErr;
-
-   if(err>0) err = 0;
-   *errnum = err;
-   return bzerrorstrings[err*-1];
-}
-#endif
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                           bzlib.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib.h b/mdk-stage1/bzlib/bzlib.h
deleted file mode 100644
index c9447a295..000000000
--- a/mdk-stage1/bzlib/bzlib.h
+++ /dev/null
@@ -1,319 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Public header file for the library.                   ---*/
-/*---                                               bzlib.h ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-
-#ifndef _BZLIB_H
-#define _BZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define BZ_RUN               0
-#define BZ_FLUSH             1
-#define BZ_FINISH            2
-
-#define BZ_OK                0
-#define BZ_RUN_OK            1
-#define BZ_FLUSH_OK          2
-#define BZ_FINISH_OK         3
-#define BZ_STREAM_END        4
-#define BZ_SEQUENCE_ERROR    (-1)
-#define BZ_PARAM_ERROR       (-2)
-#define BZ_MEM_ERROR         (-3)
-#define BZ_DATA_ERROR        (-4)
-#define BZ_DATA_ERROR_MAGIC  (-5)
-#define BZ_IO_ERROR          (-6)
-#define BZ_UNEXPECTED_EOF    (-7)
-#define BZ_OUTBUFF_FULL      (-8)
-#define BZ_CONFIG_ERROR      (-9)
-
-typedef 
-   struct {
-      char *next_in;
-      unsigned int avail_in;
-      unsigned int total_in_lo32;
-      unsigned int total_in_hi32;
-
-      char *next_out;
-      unsigned int avail_out;
-      unsigned int total_out_lo32;
-      unsigned int total_out_hi32;
-
-      void *state;
-
-      void *(*bzalloc)(void *,int,int);
-      void (*bzfree)(void *,void *);
-      void *opaque;
-   } 
-   bz_stream;
-
-
-#ifndef BZ_IMPORT
-#define BZ_EXPORT
-#endif
-
-#ifdef _WIN32
-#   include <stdio.h>
-#   include <windows.h>
-#   ifdef small
-      /* windows.h define small to char */
-#      undef small
-#   endif
-#   ifdef BZ_EXPORT
-#   define BZ_API(func) WINAPI func
-#   define BZ_EXTERN extern
-#   else
-   /* import windows dll dynamically */
-#   define BZ_API(func) (WINAPI * func)
-#   define BZ_EXTERN
-#   endif
-#else
-#   define BZ_API(func) func
-#   define BZ_EXTERN extern
-#endif
-
-
-/*-- Core (low-level) library functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressInit) ( 
-      bz_stream* strm, 
-      int        blockSize100k, 
-      int        verbosity, 
-      int        workFactor 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompress) ( 
-      bz_stream* strm, 
-      int action 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) ( 
-      bz_stream* strm 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) ( 
-      bz_stream *strm, 
-      int       verbosity, 
-      int       small
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompress) ( 
-      bz_stream* strm 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) ( 
-      bz_stream *strm 
-   );
-
-
-
-/*-- High(er) level library functions --*/
-
-#ifndef BZ_NO_STDIO
-#define BZ_MAX_UNUSED 5000
-
-typedef void BZFILE;
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) ( 
-      int*  bzerror,   
-      FILE* f, 
-      int   verbosity, 
-      int   small,
-      void* unused,    
-      int   nUnused 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadClose) ( 
-      int*    bzerror, 
-      BZFILE* b 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) ( 
-      int*    bzerror, 
-      BZFILE* b, 
-      void**  unused,  
-      int*    nUnused 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzRead) ( 
-      int*    bzerror, 
-      BZFILE* b, 
-      void*   buf, 
-      int     len 
-   );
-
-BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) ( 
-      int*  bzerror,      
-      FILE* f, 
-      int   blockSize100k, 
-      int   verbosity, 
-      int   workFactor 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzWrite) ( 
-      int*    bzerror, 
-      BZFILE* b, 
-      void*   buf, 
-      int     len 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose) ( 
-      int*          bzerror, 
-      BZFILE*       b, 
-      int           abandon, 
-      unsigned int* nbytes_in, 
-      unsigned int* nbytes_out 
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) ( 
-      int*          bzerror, 
-      BZFILE*       b, 
-      int           abandon, 
-      unsigned int* nbytes_in_lo32, 
-      unsigned int* nbytes_in_hi32, 
-      unsigned int* nbytes_out_lo32, 
-      unsigned int* nbytes_out_hi32
-   );
-#endif
-
-
-/*-- Utility functions --*/
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) ( 
-      char*         dest, 
-      unsigned int* destLen,
-      char*         source, 
-      unsigned int  sourceLen,
-      int           blockSize100k, 
-      int           verbosity, 
-      int           workFactor 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) ( 
-      char*         dest, 
-      unsigned int* destLen,
-      char*         source, 
-      unsigned int  sourceLen,
-      int           small, 
-      int           verbosity 
-   );
-
-
-/*--
-   Code contributed by Yoshioka Tsuneo
-   (QWF00133@niftyserve.or.jp/tsuneo-y@is.aist-nara.ac.jp),
-   to support better zlib compatibility.
-   This code is not _officially_ part of libbzip2 (yet);
-   I haven't tested it, documented it, or considered the
-   threading-safeness of it.
-   If this code breaks, please contact both Yoshioka and me.
---*/
-
-BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) (
-      void
-   );
-
-#ifndef BZ_NO_STDIO
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) (
-      const char *path,
-      const char *mode
-   );
-
-BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) (
-      int        fd,
-      const char *mode
-   );
-         
-BZ_EXTERN int BZ_API(BZ2_bzread) (
-      BZFILE* b, 
-      void* buf, 
-      int len 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzwrite) (
-      BZFILE* b, 
-      void*   buf, 
-      int     len 
-   );
-
-BZ_EXTERN int BZ_API(BZ2_bzflush) (
-      BZFILE* b
-   );
-
-BZ_EXTERN void BZ_API(BZ2_bzclose) (
-      BZFILE* b
-   );
-
-BZ_EXTERN const char * BZ_API(BZ2_bzerror) (
-      BZFILE *b, 
-      int    *errnum
-   );
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/*-------------------------------------------------------------*/
-/*--- end                                           bzlib.h ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/bzlib_private.h b/mdk-stage1/bzlib/bzlib_private.h
deleted file mode 100644
index fb51c7a1d..000000000
--- a/mdk-stage1/bzlib/bzlib_private.h
+++ /dev/null
@@ -1,530 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Private header file for the library.                  ---*/
-/*---                                       bzlib_private.h ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-
-#ifndef _BZLIB_PRIVATE_H
-#define _BZLIB_PRIVATE_H
-
-#include <stdlib.h>
-
-#ifndef BZ_NO_STDIO
-#include <stdio.h>
-#include <ctype.h>
-#include <string.h>
-#endif
-
-#include "bzlib.h"
-
-
-
-/*-- General stuff. --*/
-
-#define BZ_VERSION  "1.0.1, 23-June-2000"
-
-typedef char            Char;
-typedef unsigned char   Bool;
-typedef unsigned char   UChar;
-typedef int             Int32;
-typedef unsigned int    UInt32;
-typedef short           Int16;
-typedef unsigned short  UInt16;
-
-#define True  ((Bool)1)
-#define False ((Bool)0)
-
-#ifndef __GNUC__
-#define __inline__  /* */
-#endif 
-
-#ifndef BZ_NO_STDIO
-extern void BZ2_bz__AssertH__fail ( int errcode );
-#define AssertH(cond,errcode) \
-   { if (!(cond)) BZ2_bz__AssertH__fail ( errcode ); }
-#if BZ_DEBUG
-#define AssertD(cond,msg) \
-   { if (!(cond)) {       \
-      fprintf ( stderr,   \
-        "\n\nlibbzip2(debug build): internal error\n\t%s\n", msg );\
-      exit(1); \
-   }}
-#else
-#define AssertD(cond,msg) /* */
-#endif
-#define VPrintf0(zf) \
-   fprintf(stderr,zf)
-#define VPrintf1(zf,za1) \
-   fprintf(stderr,zf,za1)
-#define VPrintf2(zf,za1,za2) \
-   fprintf(stderr,zf,za1,za2)
-#define VPrintf3(zf,za1,za2,za3) \
-   fprintf(stderr,zf,za1,za2,za3)
-#define VPrintf4(zf,za1,za2,za3,za4) \
-   fprintf(stderr,zf,za1,za2,za3,za4)
-#define VPrintf5(zf,za1,za2,za3,za4,za5) \
-   fprintf(stderr,zf,za1,za2,za3,za4,za5)
-#else
-extern void bz_internal_error ( int errcode );
-#define AssertH(cond,errcode) \
-   { if (!(cond)) bz_internal_error ( errcode ); }
-#define AssertD(cond,msg) /* */
-#define VPrintf0(zf) /* */
-#define VPrintf1(zf,za1) /* */
-#define VPrintf2(zf,za1,za2) /* */
-#define VPrintf3(zf,za1,za2,za3) /* */
-#define VPrintf4(zf,za1,za2,za3,za4) /* */
-#define VPrintf5(zf,za1,za2,za3,za4,za5) /* */
-#endif
-
-
-#define BZALLOC(nnn) (strm->bzalloc)(strm->opaque,(nnn),1)
-#define BZFREE(ppp)  (strm->bzfree)(strm->opaque,(ppp))
-
-
-/*-- Constants for the back end. --*/
-
-#define BZ_MAX_ALPHA_SIZE 258
-#define BZ_MAX_CODE_LEN    23
-
-#define BZ_RUNA 0
-#define BZ_RUNB 1
-
-#define BZ_N_GROUPS 6
-#define BZ_G_SIZE   50
-#define BZ_N_ITERS  4
-
-#define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE))
-
-
-
-/*-- Stuff for randomising repetitive blocks. --*/
-
-extern Int32 BZ2_rNums[512];
-
-#define BZ_RAND_DECLS                          \
-   Int32 rNToGo;                               \
-   Int32 rTPos                                 \
-
-#define BZ_RAND_INIT_MASK                      \
-   s->rNToGo = 0;                              \
-   s->rTPos  = 0                               \
-
-#define BZ_RAND_MASK ((s->rNToGo == 1) ? 1 : 0)
-
-#define BZ_RAND_UPD_MASK                       \
-   if (s->rNToGo == 0) {                       \
-      s->rNToGo = BZ2_rNums[s->rTPos];         \
-      s->rTPos++;                              \
-      if (s->rTPos == 512) s->rTPos = 0;       \
-   }                                           \
-   s->rNToGo--;
-
-
-
-/*-- Stuff for doing CRCs. --*/
-
-extern UInt32 BZ2_crc32Table[256];
-
-#define BZ_INITIALISE_CRC(crcVar)              \
-{                                              \
-   crcVar = 0xffffffffL;                       \
-}
-
-#define BZ_FINALISE_CRC(crcVar)                \
-{                                              \
-   crcVar = ~(crcVar);                         \
-}
-
-#define BZ_UPDATE_CRC(crcVar,cha)              \
-{                                              \
-   crcVar = (crcVar << 8) ^                    \
-            BZ2_crc32Table[(crcVar >> 24) ^    \
-                           ((UChar)cha)];      \
-}
-
-
-
-/*-- States and modes for compression. --*/
-
-#define BZ_M_IDLE      1
-#define BZ_M_RUNNING   2
-#define BZ_M_FLUSHING  3
-#define BZ_M_FINISHING 4
-
-#define BZ_S_OUTPUT    1
-#define BZ_S_INPUT     2
-
-#define BZ_N_RADIX 2
-#define BZ_N_QSORT 12
-#define BZ_N_SHELL 18
-#define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2)
-
-
-
-
-/*-- Structure holding all the compression-side stuff. --*/
-
-typedef
-   struct {
-      /* pointer back to the struct bz_stream */
-      bz_stream* strm;
-
-      /* mode this stream is in, and whether inputting */
-      /* or outputting data */
-      Int32    mode;
-      Int32    state;
-
-      /* remembers avail_in when flush/finish requested */
-      UInt32   avail_in_expect;
-
-      /* for doing the block sorting */
-      UInt32*  arr1;
-      UInt32*  arr2;
-      UInt32*  ftab;
-      Int32    origPtr;
-
-      /* aliases for arr1 and arr2 */
-      UInt32*  ptr;
-      UChar*   block;
-      UInt16*  mtfv;
-      UChar*   zbits;
-
-      /* for deciding when to use the fallback sorting algorithm */
-      Int32    workFactor;
-
-      /* run-length-encoding of the input */
-      UInt32   state_in_ch;
-      Int32    state_in_len;
-      BZ_RAND_DECLS;
-
-      /* input and output limits and current posns */
-      Int32    nblock;
-      Int32    nblockMAX;
-      Int32    numZ;
-      Int32    state_out_pos;
-
-      /* map of bytes used in block */
-      Int32    nInUse;
-      Bool     inUse[256];
-      UChar    unseqToSeq[256];
-
-      /* the buffer for bit stream creation */
-      UInt32   bsBuff;
-      Int32    bsLive;
-
-      /* block and combined CRCs */
-      UInt32   blockCRC;
-      UInt32   combinedCRC;
-
-      /* misc administratium */
-      Int32    verbosity;
-      Int32    blockNo;
-      Int32    blockSize100k;
-
-      /* stuff for coding the MTF values */
-      Int32    nMTF;
-      Int32    mtfFreq    [BZ_MAX_ALPHA_SIZE];
-      UChar    selector   [BZ_MAX_SELECTORS];
-      UChar    selectorMtf[BZ_MAX_SELECTORS];
-
-      UChar    len     [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    code    [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    rfreq   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      /* second dimension: only 3 needed; 4 makes index calculations faster */
-      UInt32   len_pack[BZ_MAX_ALPHA_SIZE][4];
-
-   }
-   EState;
-
-
-
-/*-- externs for compression. --*/
-
-extern void 
-BZ2_blockSort ( EState* );
-
-extern void 
-BZ2_compressBlock ( EState*, Bool );
-
-extern void 
-BZ2_bsInitWrite ( EState* );
-
-extern void 
-BZ2_hbAssignCodes ( Int32*, UChar*, Int32, Int32, Int32 );
-
-extern void 
-BZ2_hbMakeCodeLengths ( UChar*, Int32*, Int32, Int32 );
-
-
-
-/*-- states for decompression. --*/
-
-#define BZ_X_IDLE        1
-#define BZ_X_OUTPUT      2
-
-#define BZ_X_MAGIC_1     10
-#define BZ_X_MAGIC_2     11
-#define BZ_X_MAGIC_3     12
-#define BZ_X_MAGIC_4     13
-#define BZ_X_BLKHDR_1    14
-#define BZ_X_BLKHDR_2    15
-#define BZ_X_BLKHDR_3    16
-#define BZ_X_BLKHDR_4    17
-#define BZ_X_BLKHDR_5    18
-#define BZ_X_BLKHDR_6    19
-#define BZ_X_BCRC_1      20
-#define BZ_X_BCRC_2      21
-#define BZ_X_BCRC_3      22
-#define BZ_X_BCRC_4      23
-#define BZ_X_RANDBIT     24
-#define BZ_X_ORIGPTR_1   25
-#define BZ_X_ORIGPTR_2   26
-#define BZ_X_ORIGPTR_3   27
-#define BZ_X_MAPPING_1   28
-#define BZ_X_MAPPING_2   29
-#define BZ_X_SELECTOR_1  30
-#define BZ_X_SELECTOR_2  31
-#define BZ_X_SELECTOR_3  32
-#define BZ_X_CODING_1    33
-#define BZ_X_CODING_2    34
-#define BZ_X_CODING_3    35
-#define BZ_X_MTF_1       36
-#define BZ_X_MTF_2       37
-#define BZ_X_MTF_3       38
-#define BZ_X_MTF_4       39
-#define BZ_X_MTF_5       40
-#define BZ_X_MTF_6       41
-#define BZ_X_ENDHDR_2    42
-#define BZ_X_ENDHDR_3    43
-#define BZ_X_ENDHDR_4    44
-#define BZ_X_ENDHDR_5    45
-#define BZ_X_ENDHDR_6    46
-#define BZ_X_CCRC_1      47
-#define BZ_X_CCRC_2      48
-#define BZ_X_CCRC_3      49
-#define BZ_X_CCRC_4      50
-
-
-
-/*-- Constants for the fast MTF decoder. --*/
-
-#define MTFA_SIZE 4096
-#define MTFL_SIZE 16
-
-
-
-/*-- Structure holding all the decompression-side stuff. --*/
-
-typedef
-   struct {
-      /* pointer back to the struct bz_stream */
-      bz_stream* strm;
-
-      /* state indicator for this stream */
-      Int32    state;
-
-      /* for doing the final run-length decoding */
-      UChar    state_out_ch;
-      Int32    state_out_len;
-      Bool     blockRandomised;
-      BZ_RAND_DECLS;
-
-      /* the buffer for bit stream reading */
-      UInt32   bsBuff;
-      Int32    bsLive;
-
-      /* misc administratium */
-      Int32    blockSize100k;
-      Bool     smallDecompress;
-      Int32    currBlockNo;
-      Int32    verbosity;
-
-      /* for undoing the Burrows-Wheeler transform */
-      Int32    origPtr;
-      UInt32   tPos;
-      Int32    k0;
-      Int32    unzftab[256];
-      Int32    nblock_used;
-      Int32    cftab[257];
-      Int32    cftabCopy[257];
-
-      /* for undoing the Burrows-Wheeler transform (FAST) */
-      UInt32   *tt;
-
-      /* for undoing the Burrows-Wheeler transform (SMALL) */
-      UInt16   *ll16;
-      UChar    *ll4;
-
-      /* stored and calculated CRCs */
-      UInt32   storedBlockCRC;
-      UInt32   storedCombinedCRC;
-      UInt32   calculatedBlockCRC;
-      UInt32   calculatedCombinedCRC;
-
-      /* map of bytes used in block */
-      Int32    nInUse;
-      Bool     inUse[256];
-      Bool     inUse16[16];
-      UChar    seqToUnseq[256];
-
-      /* for decoding the MTF values */
-      UChar    mtfa   [MTFA_SIZE];
-      Int32    mtfbase[256 / MTFL_SIZE];
-      UChar    selector   [BZ_MAX_SELECTORS];
-      UChar    selectorMtf[BZ_MAX_SELECTORS];
-      UChar    len  [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-
-      Int32    limit  [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    base   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    perm   [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-      Int32    minLens[BZ_N_GROUPS];
-
-      /* save area for scalars in the main decompress code */
-      Int32    save_i;
-      Int32    save_j;
-      Int32    save_t;
-      Int32    save_alphaSize;
-      Int32    save_nGroups;
-      Int32    save_nSelectors;
-      Int32    save_EOB;
-      Int32    save_groupNo;
-      Int32    save_groupPos;
-      Int32    save_nextSym;
-      Int32    save_nblockMAX;
-      Int32    save_nblock;
-      Int32    save_es;
-      Int32    save_N;
-      Int32    save_curr;
-      Int32    save_zt;
-      Int32    save_zn; 
-      Int32    save_zvec;
-      Int32    save_zj;
-      Int32    save_gSel;
-      Int32    save_gMinlen;
-      Int32*   save_gLimit;
-      Int32*   save_gBase;
-      Int32*   save_gPerm;
-
-   }
-   DState;
-
-
-
-/*-- Macros for decompression. --*/
-
-#define BZ_GET_FAST(cccc)                     \
-    s->tPos = s->tt[s->tPos];                 \
-    cccc = (UChar)(s->tPos & 0xff);           \
-    s->tPos >>= 8;
-
-#define BZ_GET_FAST_C(cccc)                   \
-    c_tPos = c_tt[c_tPos];                    \
-    cccc = (UChar)(c_tPos & 0xff);            \
-    c_tPos >>= 8;
-
-#define SET_LL4(i,n)                                          \
-   { if (((i) & 0x1) == 0)                                    \
-        s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0xf0) | (n); else    \
-        s->ll4[(i) >> 1] = (s->ll4[(i) >> 1] & 0x0f) | ((n) << 4);  \
-   }
-
-#define GET_LL4(i)                             \
-   ((((UInt32)(s->ll4[(i) >> 1])) >> (((i) << 2) & 0x4)) & 0xF)
-
-#define SET_LL(i,n)                          \
-   { s->ll16[i] = (UInt16)(n & 0x0000ffff);  \
-     SET_LL4(i, n >> 16);                    \
-   }
-
-#define GET_LL(i) \
-   (((UInt32)s->ll16[i]) | (GET_LL4(i) << 16))
-
-#define BZ_GET_SMALL(cccc)                            \
-      cccc = BZ2_indexIntoF ( s->tPos, s->cftab );    \
-      s->tPos = GET_LL(s->tPos);
-
-
-/*-- externs for decompression. --*/
-
-extern Int32 
-BZ2_indexIntoF ( Int32, Int32* );
-
-extern Int32 
-BZ2_decompress ( DState* );
-
-extern void 
-BZ2_hbCreateDecodeTables ( Int32*, Int32*, Int32*, UChar*,
-                           Int32,  Int32, Int32 );
-
-
-#endif
-
-
-/*-- BZ_NO_STDIO seems to make NULL disappear on some platforms. --*/
-
-#ifdef BZ_NO_STDIO
-#ifndef NULL
-#define NULL 0
-#endif
-#endif
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                   bzlib_private.h ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/compress.c b/mdk-stage1/bzlib/compress.c
deleted file mode 100644
index 58d5abe7c..000000000
--- a/mdk-stage1/bzlib/compress.c
+++ /dev/null
@@ -1,720 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Compression machinery (not incl block sorting)        ---*/
-/*---                                            compress.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-/*--
-   CHANGES
-   ~~~~~~~
-   0.9.0 -- original version.
-
-   0.9.0a/b -- no changes in this file.
-
-   0.9.0c
-      * changed setting of nGroups in sendMTFValues() so as to 
-        do a bit better on small files
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-/*--- Bit stream I/O                              ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-void BZ2_bsInitWrite ( EState* s )
-{
-   s->bsLive = 0;
-   s->bsBuff = 0;
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsFinishWrite ( EState* s )
-{
-   while (s->bsLive > 0) {
-      s->zbits[s->numZ] = (UChar)(s->bsBuff >> 24);
-      s->numZ++;
-      s->bsBuff <<= 8;
-      s->bsLive -= 8;
-   }
-}
-
-
-/*---------------------------------------------------*/
-#define bsNEEDW(nz)                           \
-{                                             \
-   while (s->bsLive >= 8) {                   \
-      s->zbits[s->numZ]                       \
-         = (UChar)(s->bsBuff >> 24);          \
-      s->numZ++;                              \
-      s->bsBuff <<= 8;                        \
-      s->bsLive -= 8;                         \
-   }                                          \
-}
-
-
-/*---------------------------------------------------*/
-static
-__inline__
-void bsW ( EState* s, Int32 n, UInt32 v )
-{
-   bsNEEDW ( n );
-   s->bsBuff |= (v << (32 - s->bsLive - n));
-   s->bsLive += n;
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsPutUInt32 ( EState* s, UInt32 u )
-{
-   bsW ( s, 8, (u >> 24) & 0xffL );
-   bsW ( s, 8, (u >> 16) & 0xffL );
-   bsW ( s, 8, (u >>  8) & 0xffL );
-   bsW ( s, 8,  u        & 0xffL );
-}
-
-
-/*---------------------------------------------------*/
-static
-void bsPutUChar ( EState* s, UChar c )
-{
-   bsW( s, 8, (UInt32)c );
-}
-
-
-/*---------------------------------------------------*/
-/*--- The back end proper                         ---*/
-/*---------------------------------------------------*/
-
-/*---------------------------------------------------*/
-static
-void makeMaps_e ( EState* s )
-{
-   Int32 i;
-   s->nInUse = 0;
-   for (i = 0; i < 256; i++)
-      if (s->inUse[i]) {
-         s->unseqToSeq[i] = s->nInUse;
-         s->nInUse++;
-      }
-}
-
-
-/*---------------------------------------------------*/
-static
-void generateMTFValues ( EState* s )
-{
-   UChar   yy[256];
-   Int32   i, j;
-   Int32   zPend;
-   Int32   wr;
-   Int32   EOB;
-
-   /* 
-      After sorting (eg, here),
-         s->arr1 [ 0 .. s->nblock-1 ] holds sorted order,
-         and
-         ((UChar*)s->arr2) [ 0 .. s->nblock-1 ] 
-         holds the original block data.
-
-      The first thing to do is generate the MTF values,
-      and put them in
-         ((UInt16*)s->arr1) [ 0 .. s->nblock-1 ].
-      Because there are strictly fewer or equal MTF values
-      than block values, ptr values in this area are overwritten
-      with MTF values only when they are no longer needed.
-
-      The final compressed bitstream is generated into the
-      area starting at
-         (UChar*) (&((UChar*)s->arr2)[s->nblock])
-
-      These storage aliases are set up in bzCompressInit(),
-      except for the last one, which is arranged in 
-      compressBlock().
-   */
-   UInt32* ptr   = s->ptr;
-   UChar* block  = s->block;
-   UInt16* mtfv  = s->mtfv;
-
-   makeMaps_e ( s );
-   EOB = s->nInUse+1;
-
-   for (i = 0; i <= EOB; i++) s->mtfFreq[i] = 0;
-
-   wr = 0;
-   zPend = 0;
-   for (i = 0; i < s->nInUse; i++) yy[i] = (UChar) i;
-
-   for (i = 0; i < s->nblock; i++) {
-      UChar ll_i;
-      AssertD ( wr <= i, "generateMTFValues(1)" );
-      j = ptr[i]-1; if (j < 0) j += s->nblock;
-      ll_i = s->unseqToSeq[block[j]];
-      AssertD ( ll_i < s->nInUse, "generateMTFValues(2a)" );
-
-      if (yy[0] == ll_i) { 
-         zPend++;
-      } else {
-
-         if (zPend > 0) {
-            zPend--;
-            while (True) {
-               if (zPend & 1) {
-                  mtfv[wr] = BZ_RUNB; wr++; 
-                  s->mtfFreq[BZ_RUNB]++; 
-               } else {
-                  mtfv[wr] = BZ_RUNA; wr++; 
-                  s->mtfFreq[BZ_RUNA]++; 
-               }
-               if (zPend < 2) break;
-               zPend = (zPend - 2) / 2;
-            };
-            zPend = 0;
-         }
-         {
-            register UChar  rtmp;
-            register UChar* ryy_j;
-            register UChar  rll_i;
-            rtmp  = yy[1];
-            yy[1] = yy[0];
-            ryy_j = &(yy[1]);
-            rll_i = ll_i;
-            while ( rll_i != rtmp ) {
-               register UChar rtmp2;
-               ryy_j++;
-               rtmp2  = rtmp;
-               rtmp   = *ryy_j;
-               *ryy_j = rtmp2;
-            };
-            yy[0] = rtmp;
-            j = ryy_j - &(yy[0]);
-            mtfv[wr] = j+1; wr++; s->mtfFreq[j+1]++;
-         }
-
-      }
-   }
-
-   if (zPend > 0) {
-      zPend--;
-      while (True) {
-         if (zPend & 1) {
-            mtfv[wr] = BZ_RUNB; wr++; 
-            s->mtfFreq[BZ_RUNB]++; 
-         } else {
-            mtfv[wr] = BZ_RUNA; wr++; 
-            s->mtfFreq[BZ_RUNA]++; 
-         }
-         if (zPend < 2) break;
-         zPend = (zPend - 2) / 2;
-      };
-      zPend = 0;
-   }
-
-   mtfv[wr] = EOB; wr++; s->mtfFreq[EOB]++;
-
-   s->nMTF = wr;
-}
-
-
-/*---------------------------------------------------*/
-#define BZ_LESSER_ICOST  0
-#define BZ_GREATER_ICOST 15
-
-static
-void sendMTFValues ( EState* s )
-{
-   Int32 v, t, i, j, gs, ge, totc, bt, bc, iter;
-   Int32 nSelectors, alphaSize, minLen, maxLen, selCtr;
-   Int32 nGroups, nBytes;
-
-   /*--
-   UChar  len [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-   is a global since the decoder also needs it.
-
-   Int32  code[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-   Int32  rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
-   are also globals only used in this proc.
-   Made global to keep stack frame size small.
-   --*/
-
-
-   UInt16 cost[BZ_N_GROUPS];
-   Int32  fave[BZ_N_GROUPS];
-
-   UInt16* mtfv = s->mtfv;
-
-   if (s->verbosity >= 3)
-      VPrintf3( "      %d in block, %d after MTF & 1-2 coding, "
-                "%d+2 syms in use\n", 
-                s->nblock, s->nMTF, s->nInUse );
-
-   alphaSize = s->nInUse+2;
-   for (t = 0; t < BZ_N_GROUPS; t++)
-      for (v = 0; v < alphaSize; v++)
-         s->len[t][v] = BZ_GREATER_ICOST;
-
-   /*--- Decide how many coding tables to use ---*/
-   AssertH ( s->nMTF > 0, 3001 );
-   if (s->nMTF < 200)  nGroups = 2; else
-   if (s->nMTF < 600)  nGroups = 3; else
-   if (s->nMTF < 1200) nGroups = 4; else
-   if (s->nMTF < 2400) nGroups = 5; else
-                       nGroups = 6;
-
-   /*--- Generate an initial set of coding tables ---*/
-   { 
-      Int32 nPart, remF, tFreq, aFreq;
-
-      nPart = nGroups;
-      remF  = s->nMTF;
-      gs = 0;
-      while (nPart > 0) {
-         tFreq = remF / nPart;
-         ge = gs-1;
-         aFreq = 0;
-         while (aFreq < tFreq && ge < alphaSize-1) {
-            ge++;
-            aFreq += s->mtfFreq[ge];
-         }
-
-         if (ge > gs 
-             && nPart != nGroups && nPart != 1 
-             && ((nGroups-nPart) % 2 == 1)) {
-            aFreq -= s->mtfFreq[ge];
-            ge--;
-         }
-
-         if (s->verbosity >= 3)
-            VPrintf5( "      initial group %d, [%d .. %d], "
-                      "has %d syms (%4.1f%%)\n",
-                      nPart, gs, ge, aFreq, 
-                      (100.0 * (float)aFreq) / (float)(s->nMTF) );
- 
-         for (v = 0; v < alphaSize; v++)
-            if (v >= gs && v <= ge) 
-               s->len[nPart-1][v] = BZ_LESSER_ICOST; else
-               s->len[nPart-1][v] = BZ_GREATER_ICOST;
- 
-         nPart--;
-         gs = ge+1;
-         remF -= aFreq;
-      }
-   }
-
-   /*--- 
-      Iterate up to BZ_N_ITERS times to improve the tables.
-   ---*/
-   for (iter = 0; iter < BZ_N_ITERS; iter++) {
-
-      for (t = 0; t < nGroups; t++) fave[t] = 0;
-
-      for (t = 0; t < nGroups; t++)
-         for (v = 0; v < alphaSize; v++)
-            s->rfreq[t][v] = 0;
-
-      /*---
-        Set up an auxiliary length table which is used to fast-track
-	the common case (nGroups == 6). 
-      ---*/
-      if (nGroups == 6) {
-         for (v = 0; v < alphaSize; v++) {
-            s->len_pack[v][0] = (s->len[1][v] << 16) | s->len[0][v];
-            s->len_pack[v][1] = (s->len[3][v] << 16) | s->len[2][v];
-            s->len_pack[v][2] = (s->len[5][v] << 16) | s->len[4][v];
-	 }
-      }
-
-      nSelectors = 0;
-      totc = 0;
-      gs = 0;
-      while (True) {
-
-         /*--- Set group start & end marks. --*/
-         if (gs >= s->nMTF) break;
-         ge = gs + BZ_G_SIZE - 1; 
-         if (ge >= s->nMTF) ge = s->nMTF-1;
-
-         /*-- 
-            Calculate the cost of this group as coded
-            by each of the coding tables.
-         --*/
-         for (t = 0; t < nGroups; t++) cost[t] = 0;
-
-         if (nGroups == 6 && 50 == ge-gs+1) {
-            /*--- fast track the common case ---*/
-            register UInt32 cost01, cost23, cost45;
-            register UInt16 icv;
-            cost01 = cost23 = cost45 = 0;
-
-#           define BZ_ITER(nn)                \
-               icv = mtfv[gs+(nn)];           \
-               cost01 += s->len_pack[icv][0]; \
-               cost23 += s->len_pack[icv][1]; \
-               cost45 += s->len_pack[icv][2]; \
-
-            BZ_ITER(0);  BZ_ITER(1);  BZ_ITER(2);  BZ_ITER(3);  BZ_ITER(4);
-            BZ_ITER(5);  BZ_ITER(6);  BZ_ITER(7);  BZ_ITER(8);  BZ_ITER(9);
-            BZ_ITER(10); BZ_ITER(11); BZ_ITER(12); BZ_ITER(13); BZ_ITER(14);
-            BZ_ITER(15); BZ_ITER(16); BZ_ITER(17); BZ_ITER(18); BZ_ITER(19);
-            BZ_ITER(20); BZ_ITER(21); BZ_ITER(22); BZ_ITER(23); BZ_ITER(24);
-            BZ_ITER(25); BZ_ITER(26); BZ_ITER(27); BZ_ITER(28); BZ_ITER(29);
-            BZ_ITER(30); BZ_ITER(31); BZ_ITER(32); BZ_ITER(33); BZ_ITER(34);
-            BZ_ITER(35); BZ_ITER(36); BZ_ITER(37); BZ_ITER(38); BZ_ITER(39);
-            BZ_ITER(40); BZ_ITER(41); BZ_ITER(42); BZ_ITER(43); BZ_ITER(44);
-            BZ_ITER(45); BZ_ITER(46); BZ_ITER(47); BZ_ITER(48); BZ_ITER(49);
-
-#           undef BZ_ITER
-
-            cost[0] = cost01 & 0xffff; cost[1] = cost01 >> 16;
-            cost[2] = cost23 & 0xffff; cost[3] = cost23 >> 16;
-            cost[4] = cost45 & 0xffff; cost[5] = cost45 >> 16;
-
-         } else {
-	    /*--- slow version which correctly handles all situations ---*/
-            for (i = gs; i <= ge; i++) { 
-               UInt16 icv = mtfv[i];
-               for (t = 0; t < nGroups; t++) cost[t] += s->len[t][icv];
-            }
-         }
- 
-         /*-- 
-            Find the coding table which is best for this group,
-            and record its identity in the selector table.
-         --*/
-         bc = 999999999; bt = -1;
-         for (t = 0; t < nGroups; t++)
-            if (cost[t] < bc) { bc = cost[t]; bt = t; };
-         totc += bc;
-         fave[bt]++;
-         s->selector[nSelectors] = bt;
-         nSelectors++;
-
-         /*-- 
-            Increment the symbol frequencies for the selected table.
-          --*/
-         if (nGroups == 6 && 50 == ge-gs+1) {
-            /*--- fast track the common case ---*/
-
-#           define BZ_ITUR(nn) s->rfreq[bt][ mtfv[gs+(nn)] ]++
-
-            BZ_ITUR(0);  BZ_ITUR(1);  BZ_ITUR(2);  BZ_ITUR(3);  BZ_ITUR(4);
-            BZ_ITUR(5);  BZ_ITUR(6);  BZ_ITUR(7);  BZ_ITUR(8);  BZ_ITUR(9);
-            BZ_ITUR(10); BZ_ITUR(11); BZ_ITUR(12); BZ_ITUR(13); BZ_ITUR(14);
-            BZ_ITUR(15); BZ_ITUR(16); BZ_ITUR(17); BZ_ITUR(18); BZ_ITUR(19);
-            BZ_ITUR(20); BZ_ITUR(21); BZ_ITUR(22); BZ_ITUR(23); BZ_ITUR(24);
-            BZ_ITUR(25); BZ_ITUR(26); BZ_ITUR(27); BZ_ITUR(28); BZ_ITUR(29);
-            BZ_ITUR(30); BZ_ITUR(31); BZ_ITUR(32); BZ_ITUR(33); BZ_ITUR(34);
-            BZ_ITUR(35); BZ_ITUR(36); BZ_ITUR(37); BZ_ITUR(38); BZ_ITUR(39);
-            BZ_ITUR(40); BZ_ITUR(41); BZ_ITUR(42); BZ_ITUR(43); BZ_ITUR(44);
-            BZ_ITUR(45); BZ_ITUR(46); BZ_ITUR(47); BZ_ITUR(48); BZ_ITUR(49);
-
-#           undef BZ_ITUR
-
-         } else {
-	    /*--- slow version which correctly handles all situations ---*/
-            for (i = gs; i <= ge; i++)
-               s->rfreq[bt][ mtfv[i] ]++;
-         }
-
-         gs = ge+1;
-      }
-      if (s->verbosity >= 3) {
-         VPrintf2 ( "      pass %d: size is %d, grp uses are ", 
-                   iter+1, totc/8 );
-         for (t = 0; t < nGroups; t++)
-            VPrintf1 ( "%d ", fave[t] );
-         VPrintf0 ( "\n" );
-      }
-
-      /*--
-        Recompute the tables based on the accumulated frequencies.
-      --*/
-      for (t = 0; t < nGroups; t++)
-         BZ2_hbMakeCodeLengths ( &(s->len[t][0]), &(s->rfreq[t][0]), 
-                                 alphaSize, 20 );
-   }
-
-
-   AssertH( nGroups < 8, 3002 );
-   AssertH( nSelectors < 32768 &&
-            nSelectors <= (2 + (900000 / BZ_G_SIZE)),
-            3003 );
-
-
-   /*--- Compute MTF values for the selectors. ---*/
-   {
-      UChar pos[BZ_N_GROUPS], ll_i, tmp2, tmp;
-      for (i = 0; i < nGroups; i++) pos[i] = i;
-      for (i = 0; i < nSelectors; i++) {
-         ll_i = s->selector[i];
-         j = 0;
-         tmp = pos[j];
-         while ( ll_i != tmp ) {
-            j++;
-            tmp2 = tmp;
-            tmp = pos[j];
-            pos[j] = tmp2;
-         };
-         pos[0] = tmp;
-         s->selectorMtf[i] = j;
-      }
-   };
-
-   /*--- Assign actual codes for the tables. --*/
-   for (t = 0; t < nGroups; t++) {
-      minLen = 32;
-      maxLen = 0;
-      for (i = 0; i < alphaSize; i++) {
-         if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
-         if (s->len[t][i] < minLen) minLen = s->len[t][i];
-      }
-      AssertH ( !(maxLen > 20), 3004 );
-      AssertH ( !(minLen < 1),  3005 );
-      BZ2_hbAssignCodes ( &(s->code[t][0]), &(s->len[t][0]), 
-                          minLen, maxLen, alphaSize );
-   }
-
-   /*--- Transmit the mapping table. ---*/
-   { 
-      Bool inUse16[16];
-      for (i = 0; i < 16; i++) {
-          inUse16[i] = False;
-          for (j = 0; j < 16; j++)
-             if (s->inUse[i * 16 + j]) inUse16[i] = True;
-      }
-     
-      nBytes = s->numZ;
-      for (i = 0; i < 16; i++)
-         if (inUse16[i]) bsW(s,1,1); else bsW(s,1,0);
-
-      for (i = 0; i < 16; i++)
-         if (inUse16[i])
-            for (j = 0; j < 16; j++) {
-               if (s->inUse[i * 16 + j]) bsW(s,1,1); else bsW(s,1,0);
-            }
-
-      if (s->verbosity >= 3) 
-         VPrintf1( "      bytes: mapping %d, ", s->numZ-nBytes );
-   }
-
-   /*--- Now the selectors. ---*/
-   nBytes = s->numZ;
-   bsW ( s, 3, nGroups );
-   bsW ( s, 15, nSelectors );
-   for (i = 0; i < nSelectors; i++) { 
-      for (j = 0; j < s->selectorMtf[i]; j++) bsW(s,1,1);
-      bsW(s,1,0);
-   }
-   if (s->verbosity >= 3)
-      VPrintf1( "selectors %d, ", s->numZ-nBytes );
-
-   /*--- Now the coding tables. ---*/
-   nBytes = s->numZ;
-
-   for (t = 0; t < nGroups; t++) {
-      Int32 curr = s->len[t][0];
-      bsW ( s, 5, curr );
-      for (i = 0; i < alphaSize; i++) {
-         while (curr < s->len[t][i]) { bsW(s,2,2); curr++; /* 10 */ };
-         while (curr > s->len[t][i]) { bsW(s,2,3); curr--; /* 11 */ };
-         bsW ( s, 1, 0 );
-      }
-   }
-
-   if (s->verbosity >= 3)
-      VPrintf1 ( "code lengths %d, ", s->numZ-nBytes );
-
-   /*--- And finally, the block data proper ---*/
-   nBytes = s->numZ;
-   selCtr = 0;
-   gs = 0;
-   while (True) {
-      if (gs >= s->nMTF) break;
-      ge = gs + BZ_G_SIZE - 1; 
-      if (ge >= s->nMTF) ge = s->nMTF-1;
-      AssertH ( s->selector[selCtr] < nGroups, 3006 );
-
-      if (nGroups == 6 && 50 == ge-gs+1) {
-            /*--- fast track the common case ---*/
-            UInt16 mtfv_i;
-            UChar* s_len_sel_selCtr 
-               = &(s->len[s->selector[selCtr]][0]);
-            Int32* s_code_sel_selCtr
-               = &(s->code[s->selector[selCtr]][0]);
-
-#           define BZ_ITAH(nn)                      \
-               mtfv_i = mtfv[gs+(nn)];              \
-               bsW ( s,                             \
-                     s_len_sel_selCtr[mtfv_i],      \
-                     s_code_sel_selCtr[mtfv_i] )
-
-            BZ_ITAH(0);  BZ_ITAH(1);  BZ_ITAH(2);  BZ_ITAH(3);  BZ_ITAH(4);
-            BZ_ITAH(5);  BZ_ITAH(6);  BZ_ITAH(7);  BZ_ITAH(8);  BZ_ITAH(9);
-            BZ_ITAH(10); BZ_ITAH(11); BZ_ITAH(12); BZ_ITAH(13); BZ_ITAH(14);
-            BZ_ITAH(15); BZ_ITAH(16); BZ_ITAH(17); BZ_ITAH(18); BZ_ITAH(19);
-            BZ_ITAH(20); BZ_ITAH(21); BZ_ITAH(22); BZ_ITAH(23); BZ_ITAH(24);
-            BZ_ITAH(25); BZ_ITAH(26); BZ_ITAH(27); BZ_ITAH(28); BZ_ITAH(29);
-            BZ_ITAH(30); BZ_ITAH(31); BZ_ITAH(32); BZ_ITAH(33); BZ_ITAH(34);
-            BZ_ITAH(35); BZ_ITAH(36); BZ_ITAH(37); BZ_ITAH(38); BZ_ITAH(39);
-            BZ_ITAH(40); BZ_ITAH(41); BZ_ITAH(42); BZ_ITAH(43); BZ_ITAH(44);
-            BZ_ITAH(45); BZ_ITAH(46); BZ_ITAH(47); BZ_ITAH(48); BZ_ITAH(49);
-
-#           undef BZ_ITAH
-
-      } else {
-	 /*--- slow version which correctly handles all situations ---*/
-         for (i = gs; i <= ge; i++) {
-            bsW ( s, 
-                  s->len  [s->selector[selCtr]] [mtfv[i]],
-                  s->code [s->selector[selCtr]] [mtfv[i]] );
-         }
-      }
-
-
-      gs = ge+1;
-      selCtr++;
-   }
-   AssertH( selCtr == nSelectors, 3007 );
-
-   if (s->verbosity >= 3)
-      VPrintf1( "codes %d\n", s->numZ-nBytes );
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_compressBlock ( EState* s, Bool is_last_block )
-{
-   if (s->nblock > 0) {
-
-      BZ_FINALISE_CRC ( s->blockCRC );
-      s->combinedCRC = (s->combinedCRC << 1) | (s->combinedCRC >> 31);
-      s->combinedCRC ^= s->blockCRC;
-      if (s->blockNo > 1) s->numZ = 0;
-
-      if (s->verbosity >= 2)
-         VPrintf4( "    block %d: crc = 0x%8x, "
-                   "combined CRC = 0x%8x, size = %d\n",
-                   s->blockNo, s->blockCRC, s->combinedCRC, s->nblock );
-
-      BZ2_blockSort ( s );
-   }
-
-   s->zbits = (UChar*) (&((UChar*)s->arr2)[s->nblock]);
-
-   /*-- If this is the first block, create the stream header. --*/
-   if (s->blockNo == 1) {
-      BZ2_bsInitWrite ( s );
-      bsPutUChar ( s, 'B' );
-      bsPutUChar ( s, 'Z' );
-      bsPutUChar ( s, 'h' );
-      bsPutUChar ( s, (UChar)('0' + s->blockSize100k) );
-   }
-
-   if (s->nblock > 0) {
-
-      bsPutUChar ( s, 0x31 ); bsPutUChar ( s, 0x41 );
-      bsPutUChar ( s, 0x59 ); bsPutUChar ( s, 0x26 );
-      bsPutUChar ( s, 0x53 ); bsPutUChar ( s, 0x59 );
-
-      /*-- Now the block's CRC, so it is in a known place. --*/
-      bsPutUInt32 ( s, s->blockCRC );
-
-      /*-- 
-         Now a single bit indicating (non-)randomisation. 
-         As of version 0.9.5, we use a better sorting algorithm
-         which makes randomisation unnecessary.  So always set
-         the randomised bit to 'no'.  Of course, the decoder
-         still needs to be able to handle randomised blocks
-         so as to maintain backwards compatibility with
-         older versions of bzip2.
-      --*/
-      bsW(s,1,0);
-
-      bsW ( s, 24, s->origPtr );
-      generateMTFValues ( s );
-      sendMTFValues ( s );
-   }
-
-
-   /*-- If this is the last block, add the stream trailer. --*/
-   if (is_last_block) {
-
-      bsPutUChar ( s, 0x17 ); bsPutUChar ( s, 0x72 );
-      bsPutUChar ( s, 0x45 ); bsPutUChar ( s, 0x38 );
-      bsPutUChar ( s, 0x50 ); bsPutUChar ( s, 0x90 );
-      bsPutUInt32 ( s, s->combinedCRC );
-      if (s->verbosity >= 2)
-         VPrintf1( "    final combined CRC = 0x%x\n   ", s->combinedCRC );
-      bsFinishWrite ( s );
-   }
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                        compress.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/crctable.c b/mdk-stage1/bzlib/crctable.c
deleted file mode 100644
index c0ea3f769..000000000
--- a/mdk-stage1/bzlib/crctable.c
+++ /dev/null
@@ -1,148 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Table for doing CRCs                                  ---*/
-/*---                                            crctable.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*--
-  I think this is an implementation of the AUTODIN-II,
-  Ethernet & FDDI 32-bit CRC standard.  Vaguely derived
-  from code by Rob Warnock, in Section 51 of the
-  comp.compression FAQ.
---*/
-
-UInt32 BZ2_crc32Table[256] = {
-
-   /*-- Ugly, innit? --*/
-
-   0x00000000L, 0x04c11db7L, 0x09823b6eL, 0x0d4326d9L,
-   0x130476dcL, 0x17c56b6bL, 0x1a864db2L, 0x1e475005L,
-   0x2608edb8L, 0x22c9f00fL, 0x2f8ad6d6L, 0x2b4bcb61L,
-   0x350c9b64L, 0x31cd86d3L, 0x3c8ea00aL, 0x384fbdbdL,
-   0x4c11db70L, 0x48d0c6c7L, 0x4593e01eL, 0x4152fda9L,
-   0x5f15adacL, 0x5bd4b01bL, 0x569796c2L, 0x52568b75L,
-   0x6a1936c8L, 0x6ed82b7fL, 0x639b0da6L, 0x675a1011L,
-   0x791d4014L, 0x7ddc5da3L, 0x709f7b7aL, 0x745e66cdL,
-   0x9823b6e0L, 0x9ce2ab57L, 0x91a18d8eL, 0x95609039L,
-   0x8b27c03cL, 0x8fe6dd8bL, 0x82a5fb52L, 0x8664e6e5L,
-   0xbe2b5b58L, 0xbaea46efL, 0xb7a96036L, 0xb3687d81L,
-   0xad2f2d84L, 0xa9ee3033L, 0xa4ad16eaL, 0xa06c0b5dL,
-   0xd4326d90L, 0xd0f37027L, 0xddb056feL, 0xd9714b49L,
-   0xc7361b4cL, 0xc3f706fbL, 0xceb42022L, 0xca753d95L,
-   0xf23a8028L, 0xf6fb9d9fL, 0xfbb8bb46L, 0xff79a6f1L,
-   0xe13ef6f4L, 0xe5ffeb43L, 0xe8bccd9aL, 0xec7dd02dL,
-   0x34867077L, 0x30476dc0L, 0x3d044b19L, 0x39c556aeL,
-   0x278206abL, 0x23431b1cL, 0x2e003dc5L, 0x2ac12072L,
-   0x128e9dcfL, 0x164f8078L, 0x1b0ca6a1L, 0x1fcdbb16L,
-   0x018aeb13L, 0x054bf6a4L, 0x0808d07dL, 0x0cc9cdcaL,
-   0x7897ab07L, 0x7c56b6b0L, 0x71159069L, 0x75d48ddeL,
-   0x6b93dddbL, 0x6f52c06cL, 0x6211e6b5L, 0x66d0fb02L,
-   0x5e9f46bfL, 0x5a5e5b08L, 0x571d7dd1L, 0x53dc6066L,
-   0x4d9b3063L, 0x495a2dd4L, 0x44190b0dL, 0x40d816baL,
-   0xaca5c697L, 0xa864db20L, 0xa527fdf9L, 0xa1e6e04eL,
-   0xbfa1b04bL, 0xbb60adfcL, 0xb6238b25L, 0xb2e29692L,
-   0x8aad2b2fL, 0x8e6c3698L, 0x832f1041L, 0x87ee0df6L,
-   0x99a95df3L, 0x9d684044L, 0x902b669dL, 0x94ea7b2aL,
-   0xe0b41de7L, 0xe4750050L, 0xe9362689L, 0xedf73b3eL,
-   0xf3b06b3bL, 0xf771768cL, 0xfa325055L, 0xfef34de2L,
-   0xc6bcf05fL, 0xc27dede8L, 0xcf3ecb31L, 0xcbffd686L,
-   0xd5b88683L, 0xd1799b34L, 0xdc3abdedL, 0xd8fba05aL,
-   0x690ce0eeL, 0x6dcdfd59L, 0x608edb80L, 0x644fc637L,
-   0x7a089632L, 0x7ec98b85L, 0x738aad5cL, 0x774bb0ebL,
-   0x4f040d56L, 0x4bc510e1L, 0x46863638L, 0x42472b8fL,
-   0x5c007b8aL, 0x58c1663dL, 0x558240e4L, 0x51435d53L,
-   0x251d3b9eL, 0x21dc2629L, 0x2c9f00f0L, 0x285e1d47L,
-   0x36194d42L, 0x32d850f5L, 0x3f9b762cL, 0x3b5a6b9bL,
-   0x0315d626L, 0x07d4cb91L, 0x0a97ed48L, 0x0e56f0ffL,
-   0x1011a0faL, 0x14d0bd4dL, 0x19939b94L, 0x1d528623L,
-   0xf12f560eL, 0xf5ee4bb9L, 0xf8ad6d60L, 0xfc6c70d7L,
-   0xe22b20d2L, 0xe6ea3d65L, 0xeba91bbcL, 0xef68060bL,
-   0xd727bbb6L, 0xd3e6a601L, 0xdea580d8L, 0xda649d6fL,
-   0xc423cd6aL, 0xc0e2d0ddL, 0xcda1f604L, 0xc960ebb3L,
-   0xbd3e8d7eL, 0xb9ff90c9L, 0xb4bcb610L, 0xb07daba7L,
-   0xae3afba2L, 0xaafbe615L, 0xa7b8c0ccL, 0xa379dd7bL,
-   0x9b3660c6L, 0x9ff77d71L, 0x92b45ba8L, 0x9675461fL,
-   0x8832161aL, 0x8cf30badL, 0x81b02d74L, 0x857130c3L,
-   0x5d8a9099L, 0x594b8d2eL, 0x5408abf7L, 0x50c9b640L,
-   0x4e8ee645L, 0x4a4ffbf2L, 0x470cdd2bL, 0x43cdc09cL,
-   0x7b827d21L, 0x7f436096L, 0x7200464fL, 0x76c15bf8L,
-   0x68860bfdL, 0x6c47164aL, 0x61043093L, 0x65c52d24L,
-   0x119b4be9L, 0x155a565eL, 0x18197087L, 0x1cd86d30L,
-   0x029f3d35L, 0x065e2082L, 0x0b1d065bL, 0x0fdc1becL,
-   0x3793a651L, 0x3352bbe6L, 0x3e119d3fL, 0x3ad08088L,
-   0x2497d08dL, 0x2056cd3aL, 0x2d15ebe3L, 0x29d4f654L,
-   0xc5a92679L, 0xc1683bceL, 0xcc2b1d17L, 0xc8ea00a0L,
-   0xd6ad50a5L, 0xd26c4d12L, 0xdf2f6bcbL, 0xdbee767cL,
-   0xe3a1cbc1L, 0xe760d676L, 0xea23f0afL, 0xeee2ed18L,
-   0xf0a5bd1dL, 0xf464a0aaL, 0xf9278673L, 0xfde69bc4L,
-   0x89b8fd09L, 0x8d79e0beL, 0x803ac667L, 0x84fbdbd0L,
-   0x9abc8bd5L, 0x9e7d9662L, 0x933eb0bbL, 0x97ffad0cL,
-   0xafb010b1L, 0xab710d06L, 0xa6322bdfL, 0xa2f33668L,
-   0xbcb4666dL, 0xb8757bdaL, 0xb5365d03L, 0xb1f740b4L
-};
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                        crctable.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/decompress.c b/mdk-stage1/bzlib/decompress.c
deleted file mode 100644
index 65cf75d8f..000000000
--- a/mdk-stage1/bzlib/decompress.c
+++ /dev/null
@@ -1,664 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Decompression machinery                               ---*/
-/*---                                          decompress.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------------*/
-static
-void makeMaps_d ( DState* s )
-{
-   Int32 i;
-   s->nInUse = 0;
-   for (i = 0; i < 256; i++)
-      if (s->inUse[i]) {
-         s->seqToUnseq[s->nInUse] = i;
-         s->nInUse++;
-      }
-}
-
-
-/*---------------------------------------------------*/
-#define RETURN(rrr)                               \
-   { retVal = rrr; goto save_state_and_return; };
-
-#define GET_BITS(lll,vvv,nnn)                     \
-   case lll: s->state = lll;                      \
-   while (True) {                                 \
-      if (s->bsLive >= nnn) {                     \
-         UInt32 v;                                \
-         v = (s->bsBuff >>                        \
-             (s->bsLive-nnn)) & ((1 << nnn)-1);   \
-         s->bsLive -= nnn;                        \
-         vvv = v;                                 \
-         break;                                   \
-      }                                           \
-      if (s->strm->avail_in == 0) RETURN(BZ_OK);  \
-      s->bsBuff                                   \
-         = (s->bsBuff << 8) |                     \
-           ((UInt32)                              \
-              (*((UChar*)(s->strm->next_in))));   \
-      s->bsLive += 8;                             \
-      s->strm->next_in++;                         \
-      s->strm->avail_in--;                        \
-      s->strm->total_in_lo32++;                   \
-      if (s->strm->total_in_lo32 == 0)            \
-         s->strm->total_in_hi32++;                \
-   }
-
-#define GET_UCHAR(lll,uuu)                        \
-   GET_BITS(lll,uuu,8)
-
-#define GET_BIT(lll,uuu)                          \
-   GET_BITS(lll,uuu,1)
-
-/*---------------------------------------------------*/
-#define GET_MTF_VAL(label1,label2,lval)           \
-{                                                 \
-   if (groupPos == 0) {                           \
-      groupNo++;                                  \
-      if (groupNo >= nSelectors)                  \
-         RETURN(BZ_DATA_ERROR);                   \
-      groupPos = BZ_G_SIZE;                       \
-      gSel = s->selector[groupNo];                \
-      gMinlen = s->minLens[gSel];                 \
-      gLimit = &(s->limit[gSel][0]);              \
-      gPerm = &(s->perm[gSel][0]);                \
-      gBase = &(s->base[gSel][0]);                \
-   }                                              \
-   groupPos--;                                    \
-   zn = gMinlen;                                  \
-   GET_BITS(label1, zvec, zn);                    \
-   while (1) {                                    \
-      if (zn > 20 /* the longest code */)         \
-         RETURN(BZ_DATA_ERROR);                   \
-      if (zvec <= gLimit[zn]) break;              \
-      zn++;                                       \
-      GET_BIT(label2, zj);                        \
-      zvec = (zvec << 1) | zj;                    \
-   };                                             \
-   if (zvec - gBase[zn] < 0                       \
-       || zvec - gBase[zn] >= BZ_MAX_ALPHA_SIZE)  \
-      RETURN(BZ_DATA_ERROR);                      \
-   lval = gPerm[zvec - gBase[zn]];                \
-}
-
-
-/*---------------------------------------------------*/
-Int32 BZ2_decompress ( DState* s )
-{
-   UChar      uc;
-   Int32      retVal;
-   Int32      minLen, maxLen;
-   bz_stream* strm = s->strm;
-
-   /* stuff that needs to be saved/restored */
-   Int32  i;
-   Int32  j;
-   Int32  t;
-   Int32  alphaSize;
-   Int32  nGroups;
-   Int32  nSelectors;
-   Int32  EOB;
-   Int32  groupNo;
-   Int32  groupPos;
-   Int32  nextSym;
-   Int32  nblockMAX;
-   Int32  nblock;
-   Int32  es;
-   Int32  N;
-   Int32  curr;
-   Int32  zt;
-   Int32  zn; 
-   Int32  zvec;
-   Int32  zj;
-   Int32  gSel;
-   Int32  gMinlen;
-   Int32* gLimit;
-   Int32* gBase;
-   Int32* gPerm;
-
-   if (s->state == BZ_X_MAGIC_1) {
-      /*initialise the save area*/
-      s->save_i           = 0;
-      s->save_j           = 0;
-      s->save_t           = 0;
-      s->save_alphaSize   = 0;
-      s->save_nGroups     = 0;
-      s->save_nSelectors  = 0;
-      s->save_EOB         = 0;
-      s->save_groupNo     = 0;
-      s->save_groupPos    = 0;
-      s->save_nextSym     = 0;
-      s->save_nblockMAX   = 0;
-      s->save_nblock      = 0;
-      s->save_es          = 0;
-      s->save_N           = 0;
-      s->save_curr        = 0;
-      s->save_zt          = 0;
-      s->save_zn          = 0;
-      s->save_zvec        = 0;
-      s->save_zj          = 0;
-      s->save_gSel        = 0;
-      s->save_gMinlen     = 0;
-      s->save_gLimit      = NULL;
-      s->save_gBase       = NULL;
-      s->save_gPerm       = NULL;
-   }
-
-   /*restore from the save area*/
-   i           = s->save_i;
-   j           = s->save_j;
-   t           = s->save_t;
-   alphaSize   = s->save_alphaSize;
-   nGroups     = s->save_nGroups;
-   nSelectors  = s->save_nSelectors;
-   EOB         = s->save_EOB;
-   groupNo     = s->save_groupNo;
-   groupPos    = s->save_groupPos;
-   nextSym     = s->save_nextSym;
-   nblockMAX   = s->save_nblockMAX;
-   nblock      = s->save_nblock;
-   es          = s->save_es;
-   N           = s->save_N;
-   curr        = s->save_curr;
-   zt          = s->save_zt;
-   zn          = s->save_zn; 
-   zvec        = s->save_zvec;
-   zj          = s->save_zj;
-   gSel        = s->save_gSel;
-   gMinlen     = s->save_gMinlen;
-   gLimit      = s->save_gLimit;
-   gBase       = s->save_gBase;
-   gPerm       = s->save_gPerm;
-
-   retVal = BZ_OK;
-
-   switch (s->state) {
-
-      GET_UCHAR(BZ_X_MAGIC_1, uc);
-      if (uc != 'B') RETURN(BZ_DATA_ERROR_MAGIC);
-
-      GET_UCHAR(BZ_X_MAGIC_2, uc);
-      if (uc != 'Z') RETURN(BZ_DATA_ERROR_MAGIC);
-
-      GET_UCHAR(BZ_X_MAGIC_3, uc)
-      if (uc != 'h') RETURN(BZ_DATA_ERROR_MAGIC);
-
-      GET_BITS(BZ_X_MAGIC_4, s->blockSize100k, 8)
-      if (s->blockSize100k < '1' || 
-          s->blockSize100k > '9') RETURN(BZ_DATA_ERROR_MAGIC);
-      s->blockSize100k -= '0';
-
-      if (s->smallDecompress) {
-         s->ll16 = BZALLOC( s->blockSize100k * 100000 * sizeof(UInt16) );
-         s->ll4  = BZALLOC( 
-                      ((1 + s->blockSize100k * 100000) >> 1) * sizeof(UChar) 
-                   );
-         if (s->ll16 == NULL || s->ll4 == NULL) RETURN(BZ_MEM_ERROR);
-      } else {
-         s->tt  = BZALLOC( s->blockSize100k * 100000 * sizeof(Int32) );
-         if (s->tt == NULL) RETURN(BZ_MEM_ERROR);
-      }
-
-      GET_UCHAR(BZ_X_BLKHDR_1, uc);
-
-      if (uc == 0x17) goto endhdr_2;
-      if (uc != 0x31) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_2, uc);
-      if (uc != 0x41) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_3, uc);
-      if (uc != 0x59) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_4, uc);
-      if (uc != 0x26) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_5, uc);
-      if (uc != 0x53) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_BLKHDR_6, uc);
-      if (uc != 0x59) RETURN(BZ_DATA_ERROR);
-
-      s->currBlockNo++;
-      if (s->verbosity >= 2)
-         VPrintf1 ( "\n    [%d: huff+mtf ", s->currBlockNo );
- 
-      s->storedBlockCRC = 0;
-      GET_UCHAR(BZ_X_BCRC_1, uc);
-      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_BCRC_2, uc);
-      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_BCRC_3, uc);
-      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_BCRC_4, uc);
-      s->storedBlockCRC = (s->storedBlockCRC << 8) | ((UInt32)uc);
-
-      GET_BITS(BZ_X_RANDBIT, s->blockRandomised, 1);
-
-      s->origPtr = 0;
-      GET_UCHAR(BZ_X_ORIGPTR_1, uc);
-      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
-      GET_UCHAR(BZ_X_ORIGPTR_2, uc);
-      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
-      GET_UCHAR(BZ_X_ORIGPTR_3, uc);
-      s->origPtr = (s->origPtr << 8) | ((Int32)uc);
-
-      if (s->origPtr < 0)
-         RETURN(BZ_DATA_ERROR);
-      if (s->origPtr > 10 + 100000*s->blockSize100k) 
-         RETURN(BZ_DATA_ERROR);
-
-      /*--- Receive the mapping table ---*/
-      for (i = 0; i < 16; i++) {
-         GET_BIT(BZ_X_MAPPING_1, uc);
-         if (uc == 1) 
-            s->inUse16[i] = True; else 
-            s->inUse16[i] = False;
-      }
-
-      for (i = 0; i < 256; i++) s->inUse[i] = False;
-
-      for (i = 0; i < 16; i++)
-         if (s->inUse16[i])
-            for (j = 0; j < 16; j++) {
-               GET_BIT(BZ_X_MAPPING_2, uc);
-               if (uc == 1) s->inUse[i * 16 + j] = True;
-            }
-      makeMaps_d ( s );
-      if (s->nInUse == 0) RETURN(BZ_DATA_ERROR);
-      alphaSize = s->nInUse+2;
-
-      /*--- Now the selectors ---*/
-      GET_BITS(BZ_X_SELECTOR_1, nGroups, 3);
-      if (nGroups < 2 || nGroups > 6) RETURN(BZ_DATA_ERROR);
-      GET_BITS(BZ_X_SELECTOR_2, nSelectors, 15);
-      if (nSelectors < 1) RETURN(BZ_DATA_ERROR);
-      for (i = 0; i < nSelectors; i++) {
-         j = 0;
-         while (True) {
-            GET_BIT(BZ_X_SELECTOR_3, uc);
-            if (uc == 0) break;
-            j++;
-            if (j >= nGroups) RETURN(BZ_DATA_ERROR);
-         }
-         s->selectorMtf[i] = j;
-      }
-
-      /*--- Undo the MTF values for the selectors. ---*/
-      {
-         UChar pos[BZ_N_GROUPS], tmp, v;
-         for (v = 0; v < nGroups; v++) pos[v] = v;
-   
-         for (i = 0; i < nSelectors; i++) {
-            v = s->selectorMtf[i];
-            tmp = pos[v];
-            while (v > 0) { pos[v] = pos[v-1]; v--; }
-            pos[0] = tmp;
-            s->selector[i] = tmp;
-         }
-      }
-
-      /*--- Now the coding tables ---*/
-      for (t = 0; t < nGroups; t++) {
-         GET_BITS(BZ_X_CODING_1, curr, 5);
-         for (i = 0; i < alphaSize; i++) {
-            while (True) {
-               if (curr < 1 || curr > 20) RETURN(BZ_DATA_ERROR);
-               GET_BIT(BZ_X_CODING_2, uc);
-               if (uc == 0) break;
-               GET_BIT(BZ_X_CODING_3, uc);
-               if (uc == 0) curr++; else curr--;
-            }
-            s->len[t][i] = curr;
-         }
-      }
-
-      /*--- Create the Huffman decoding tables ---*/
-      for (t = 0; t < nGroups; t++) {
-         minLen = 32;
-         maxLen = 0;
-         for (i = 0; i < alphaSize; i++) {
-            if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
-            if (s->len[t][i] < minLen) minLen = s->len[t][i];
-         }
-         BZ2_hbCreateDecodeTables ( 
-            &(s->limit[t][0]), 
-            &(s->base[t][0]), 
-            &(s->perm[t][0]), 
-            &(s->len[t][0]),
-            minLen, maxLen, alphaSize
-         );
-         s->minLens[t] = minLen;
-      }
-
-      /*--- Now the MTF values ---*/
-
-      EOB      = s->nInUse+1;
-      nblockMAX = 100000 * s->blockSize100k;
-      groupNo  = -1;
-      groupPos = 0;
-
-      for (i = 0; i <= 255; i++) s->unzftab[i] = 0;
-
-      /*-- MTF init --*/
-      {
-         Int32 ii, jj, kk;
-         kk = MTFA_SIZE-1;
-         for (ii = 256 / MTFL_SIZE - 1; ii >= 0; ii--) {
-            for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
-               s->mtfa[kk] = (UChar)(ii * MTFL_SIZE + jj);
-               kk--;
-            }
-            s->mtfbase[ii] = kk + 1;
-         }
-      }
-      /*-- end MTF init --*/
-
-      nblock = 0;
-      GET_MTF_VAL(BZ_X_MTF_1, BZ_X_MTF_2, nextSym);
-
-      while (True) {
-
-         if (nextSym == EOB) break;
-
-         if (nextSym == BZ_RUNA || nextSym == BZ_RUNB) {
-
-            es = -1;
-            N = 1;
-            do {
-               if (nextSym == BZ_RUNA) es = es + (0+1) * N; else
-               if (nextSym == BZ_RUNB) es = es + (1+1) * N;
-               N = N * 2;
-               GET_MTF_VAL(BZ_X_MTF_3, BZ_X_MTF_4, nextSym);
-            }
-               while (nextSym == BZ_RUNA || nextSym == BZ_RUNB);
-
-            es++;
-            uc = s->seqToUnseq[ s->mtfa[s->mtfbase[0]] ];
-            s->unzftab[uc] += es;
-
-            if (s->smallDecompress)
-               while (es > 0) {
-                  if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
-                  s->ll16[nblock] = (UInt16)uc;
-                  nblock++;
-                  es--;
-               }
-            else
-               while (es > 0) {
-                  if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
-                  s->tt[nblock] = (UInt32)uc;
-                  nblock++;
-                  es--;
-               };
-
-            continue;
-
-         } else {
-
-            if (nblock >= nblockMAX) RETURN(BZ_DATA_ERROR);
-
-            /*-- uc = MTF ( nextSym-1 ) --*/
-            {
-               Int32 ii, jj, kk, pp, lno, off;
-               UInt32 nn;
-               nn = (UInt32)(nextSym - 1);
-
-               if (nn < MTFL_SIZE) {
-                  /* avoid general-case expense */
-                  pp = s->mtfbase[0];
-                  uc = s->mtfa[pp+nn];
-                  while (nn > 3) {
-                     Int32 z = pp+nn;
-                     s->mtfa[(z)  ] = s->mtfa[(z)-1];
-                     s->mtfa[(z)-1] = s->mtfa[(z)-2];
-                     s->mtfa[(z)-2] = s->mtfa[(z)-3];
-                     s->mtfa[(z)-3] = s->mtfa[(z)-4];
-                     nn -= 4;
-                  }
-                  while (nn > 0) { 
-                     s->mtfa[(pp+nn)] = s->mtfa[(pp+nn)-1]; nn--; 
-                  };
-                  s->mtfa[pp] = uc;
-               } else { 
-                  /* general case */
-                  lno = nn / MTFL_SIZE;
-                  off = nn % MTFL_SIZE;
-                  pp = s->mtfbase[lno] + off;
-                  uc = s->mtfa[pp];
-                  while (pp > s->mtfbase[lno]) { 
-                     s->mtfa[pp] = s->mtfa[pp-1]; pp--; 
-                  };
-                  s->mtfbase[lno]++;
-                  while (lno > 0) {
-                     s->mtfbase[lno]--;
-                     s->mtfa[s->mtfbase[lno]] 
-                        = s->mtfa[s->mtfbase[lno-1] + MTFL_SIZE - 1];
-                     lno--;
-                  }
-                  s->mtfbase[0]--;
-                  s->mtfa[s->mtfbase[0]] = uc;
-                  if (s->mtfbase[0] == 0) {
-                     kk = MTFA_SIZE-1;
-                     for (ii = 256 / MTFL_SIZE-1; ii >= 0; ii--) {
-                        for (jj = MTFL_SIZE-1; jj >= 0; jj--) {
-                           s->mtfa[kk] = s->mtfa[s->mtfbase[ii] + jj];
-                           kk--;
-                        }
-                        s->mtfbase[ii] = kk + 1;
-                     }
-                  }
-               }
-            }
-            /*-- end uc = MTF ( nextSym-1 ) --*/
-
-            s->unzftab[s->seqToUnseq[uc]]++;
-            if (s->smallDecompress)
-               s->ll16[nblock] = (UInt16)(s->seqToUnseq[uc]); else
-               s->tt[nblock]   = (UInt32)(s->seqToUnseq[uc]);
-            nblock++;
-
-            GET_MTF_VAL(BZ_X_MTF_5, BZ_X_MTF_6, nextSym);
-            continue;
-         }
-      }
-
-      /* Now we know what nblock is, we can do a better sanity
-         check on s->origPtr.
-      */
-      if (s->origPtr < 0 || s->origPtr >= nblock)
-         RETURN(BZ_DATA_ERROR);
-
-      s->state_out_len = 0;
-      s->state_out_ch  = 0;
-      BZ_INITIALISE_CRC ( s->calculatedBlockCRC );
-      s->state = BZ_X_OUTPUT;
-      if (s->verbosity >= 2) VPrintf0 ( "rt+rld" );
-
-      /*-- Set up cftab to facilitate generation of T^(-1) --*/
-      s->cftab[0] = 0;
-      for (i = 1; i <= 256; i++) s->cftab[i] = s->unzftab[i-1];
-      for (i = 1; i <= 256; i++) s->cftab[i] += s->cftab[i-1];
-
-      if (s->smallDecompress) {
-
-         /*-- Make a copy of cftab, used in generation of T --*/
-         for (i = 0; i <= 256; i++) s->cftabCopy[i] = s->cftab[i];
-
-         /*-- compute the T vector --*/
-         for (i = 0; i < nblock; i++) {
-            uc = (UChar)(s->ll16[i]);
-            SET_LL(i, s->cftabCopy[uc]);
-            s->cftabCopy[uc]++;
-         }
-
-         /*-- Compute T^(-1) by pointer reversal on T --*/
-         i = s->origPtr;
-         j = GET_LL(i);
-         do {
-            Int32 tmp = GET_LL(j);
-            SET_LL(j, i);
-            i = j;
-            j = tmp;
-         }
-            while (i != s->origPtr);
-
-         s->tPos = s->origPtr;
-         s->nblock_used = 0;
-         if (s->blockRandomised) {
-            BZ_RAND_INIT_MASK;
-            BZ_GET_SMALL(s->k0); s->nblock_used++;
-            BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; 
-         } else {
-            BZ_GET_SMALL(s->k0); s->nblock_used++;
-         }
-
-      } else {
-
-         /*-- compute the T^(-1) vector --*/
-         for (i = 0; i < nblock; i++) {
-            uc = (UChar)(s->tt[i] & 0xff);
-            s->tt[s->cftab[uc]] |= (i << 8);
-            s->cftab[uc]++;
-         }
-
-         s->tPos = s->tt[s->origPtr] >> 8;
-         s->nblock_used = 0;
-         if (s->blockRandomised) {
-            BZ_RAND_INIT_MASK;
-            BZ_GET_FAST(s->k0); s->nblock_used++;
-            BZ_RAND_UPD_MASK; s->k0 ^= BZ_RAND_MASK; 
-         } else {
-            BZ_GET_FAST(s->k0); s->nblock_used++;
-         }
-
-      }
-
-      RETURN(BZ_OK);
-
-
-
-    endhdr_2:
-
-      GET_UCHAR(BZ_X_ENDHDR_2, uc);
-      if (uc != 0x72) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_ENDHDR_3, uc);
-      if (uc != 0x45) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_ENDHDR_4, uc);
-      if (uc != 0x38) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_ENDHDR_5, uc);
-      if (uc != 0x50) RETURN(BZ_DATA_ERROR);
-      GET_UCHAR(BZ_X_ENDHDR_6, uc);
-      if (uc != 0x90) RETURN(BZ_DATA_ERROR);
-
-      s->storedCombinedCRC = 0;
-      GET_UCHAR(BZ_X_CCRC_1, uc);
-      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_CCRC_2, uc);
-      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_CCRC_3, uc);
-      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-      GET_UCHAR(BZ_X_CCRC_4, uc);
-      s->storedCombinedCRC = (s->storedCombinedCRC << 8) | ((UInt32)uc);
-
-      s->state = BZ_X_IDLE;
-      RETURN(BZ_STREAM_END);
-
-      default: AssertH ( False, 4001 );
-   }
-
-   AssertH ( False, 4002 );
-
-   save_state_and_return:
-
-   s->save_i           = i;
-   s->save_j           = j;
-   s->save_t           = t;
-   s->save_alphaSize   = alphaSize;
-   s->save_nGroups     = nGroups;
-   s->save_nSelectors  = nSelectors;
-   s->save_EOB         = EOB;
-   s->save_groupNo     = groupNo;
-   s->save_groupPos    = groupPos;
-   s->save_nextSym     = nextSym;
-   s->save_nblockMAX   = nblockMAX;
-   s->save_nblock      = nblock;
-   s->save_es          = es;
-   s->save_N           = N;
-   s->save_curr        = curr;
-   s->save_zt          = zt;
-   s->save_zn          = zn;
-   s->save_zvec        = zvec;
-   s->save_zj          = zj;
-   s->save_gSel        = gSel;
-   s->save_gMinlen     = gMinlen;
-   s->save_gLimit      = gLimit;
-   s->save_gBase       = gBase;
-   s->save_gPerm       = gPerm;
-
-   return retVal;   
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                      decompress.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/huffman.c b/mdk-stage1/bzlib/huffman.c
deleted file mode 100644
index 8994f0bb9..000000000
--- a/mdk-stage1/bzlib/huffman.c
+++ /dev/null
@@ -1,232 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Huffman coding low-level stuff                        ---*/
-/*---                                             huffman.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-/*---------------------------------------------------*/
-#define WEIGHTOF(zz0)  ((zz0) & 0xffffff00)
-#define DEPTHOF(zz1)   ((zz1) & 0x000000ff)
-#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))
-
-#define ADDWEIGHTS(zw1,zw2)                           \
-   (WEIGHTOF(zw1)+WEIGHTOF(zw2)) |                    \
-   (1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))
-
-#define UPHEAP(z)                                     \
-{                                                     \
-   Int32 zz, tmp;                                     \
-   zz = z; tmp = heap[zz];                            \
-   while (weight[tmp] < weight[heap[zz >> 1]]) {      \
-      heap[zz] = heap[zz >> 1];                       \
-      zz >>= 1;                                       \
-   }                                                  \
-   heap[zz] = tmp;                                    \
-}
-
-#define DOWNHEAP(z)                                   \
-{                                                     \
-   Int32 zz, yy, tmp;                                 \
-   zz = z; tmp = heap[zz];                            \
-   while (True) {                                     \
-      yy = zz << 1;                                   \
-      if (yy > nHeap) break;                          \
-      if (yy < nHeap &&                               \
-          weight[heap[yy+1]] < weight[heap[yy]])      \
-         yy++;                                        \
-      if (weight[tmp] < weight[heap[yy]]) break;      \
-      heap[zz] = heap[yy];                            \
-      zz = yy;                                        \
-   }                                                  \
-   heap[zz] = tmp;                                    \
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbMakeCodeLengths ( UChar *len, 
-                             Int32 *freq,
-                             Int32 alphaSize,
-                             Int32 maxLen )
-{
-   /*--
-      Nodes and heap entries run from 1.  Entry 0
-      for both the heap and nodes is a sentinel.
-   --*/
-   Int32 nNodes, nHeap, n1, n2, i, j, k;
-   Bool  tooLong;
-
-   Int32 heap   [ BZ_MAX_ALPHA_SIZE + 2 ];
-   Int32 weight [ BZ_MAX_ALPHA_SIZE * 2 ];
-   Int32 parent [ BZ_MAX_ALPHA_SIZE * 2 ]; 
-
-   for (i = 0; i < alphaSize; i++)
-      weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;
-
-   while (True) {
-
-      nNodes = alphaSize;
-      nHeap = 0;
-
-      heap[0] = 0;
-      weight[0] = 0;
-      parent[0] = -2;
-
-      for (i = 1; i <= alphaSize; i++) {
-         parent[i] = -1;
-         nHeap++;
-         heap[nHeap] = i;
-         UPHEAP(nHeap);
-      }
-
-      AssertH( nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001 );
-   
-      while (nHeap > 1) {
-         n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
-         n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP(1);
-         nNodes++;
-         parent[n1] = parent[n2] = nNodes;
-         weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
-         parent[nNodes] = -1;
-         nHeap++;
-         heap[nHeap] = nNodes;
-         UPHEAP(nHeap);
-      }
-
-      AssertH( nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002 );
-
-      tooLong = False;
-      for (i = 1; i <= alphaSize; i++) {
-         j = 0;
-         k = i;
-         while (parent[k] >= 0) { k = parent[k]; j++; }
-         len[i-1] = j;
-         if (j > maxLen) tooLong = True;
-      }
-      
-      if (! tooLong) break;
-
-      for (i = 1; i < alphaSize; i++) {
-         j = weight[i] >> 8;
-         j = 1 + (j / 2);
-         weight[i] = j << 8;
-      }
-   }
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbAssignCodes ( Int32 *code,
-                         UChar *length,
-                         Int32 minLen,
-                         Int32 maxLen,
-                         Int32 alphaSize )
-{
-   Int32 n, vec, i;
-
-   vec = 0;
-   for (n = minLen; n <= maxLen; n++) {
-      for (i = 0; i < alphaSize; i++)
-         if (length[i] == n) { code[i] = vec; vec++; };
-      vec <<= 1;
-   }
-}
-
-
-/*---------------------------------------------------*/
-void BZ2_hbCreateDecodeTables ( Int32 *limit,
-                                Int32 *base,
-                                Int32 *perm,
-                                UChar *length,
-                                Int32 minLen,
-                                Int32 maxLen,
-                                Int32 alphaSize )
-{
-   Int32 pp, i, j, vec;
-
-   pp = 0;
-   for (i = minLen; i <= maxLen; i++)
-      for (j = 0; j < alphaSize; j++)
-         if (length[j] == i) { perm[pp] = j; pp++; };
-
-   for (i = 0; i < BZ_MAX_CODE_LEN; i++) base[i] = 0;
-   for (i = 0; i < alphaSize; i++) base[length[i]+1]++;
-
-   for (i = 1; i < BZ_MAX_CODE_LEN; i++) base[i] += base[i-1];
-
-   for (i = 0; i < BZ_MAX_CODE_LEN; i++) limit[i] = 0;
-   vec = 0;
-
-   for (i = minLen; i <= maxLen; i++) {
-      vec += (base[i+1] - base[i]);
-      limit[i] = vec-1;
-      vec <<= 1;
-   }
-   for (i = minLen + 1; i <= maxLen; i++)
-      base[i] = ((limit[i-1] + 1) << 1) - base[i];
-}
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                         huffman.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/bzlib/randtable.c b/mdk-stage1/bzlib/randtable.c
deleted file mode 100644
index a1fc82cfb..000000000
--- a/mdk-stage1/bzlib/randtable.c
+++ /dev/null
@@ -1,128 +0,0 @@
-
-/*-------------------------------------------------------------*/
-/*--- Table for randomising repetitive blocks               ---*/
-/*---                                           randtable.c ---*/
-/*-------------------------------------------------------------*/
-
-/*--
-  This file is a part of bzip2 and/or libbzip2, a program and
-  library for lossless, block-sorting data compression.
-
-  Copyright (C) 1996-2000 Julian R Seward.  All rights reserved.
-
-  Redistribution and use in source and binary forms, with or without
-  modification, are permitted provided that the following conditions
-  are met:
-
-  1. Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-  2. The origin of this software must not be misrepresented; you must 
-     not claim that you wrote the original software.  If you use this 
-     software in a product, an acknowledgment in the product 
-     documentation would be appreciated but is not required.
-
-  3. Altered source versions must be plainly marked as such, and must
-     not be misrepresented as being the original software.
-
-  4. The name of the author may not be used to endorse or promote 
-     products derived from this software without specific prior written 
-     permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-  OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-  GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-  Julian Seward, Cambridge, UK.
-  jseward@acm.org
-  bzip2/libbzip2 version 1.0 of 21 March 2000
-
-  This program is based on (at least) the work of:
-     Mike Burrows
-     David Wheeler
-     Peter Fenwick
-     Alistair Moffat
-     Radford Neal
-     Ian H. Witten
-     Robert Sedgewick
-     Jon L. Bentley
-
-  For more information on these sources, see the manual.
---*/
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-
-#include "bzlib_private.h"
-
-
-/*---------------------------------------------*/
-Int32 BZ2_rNums[512] = { 
-   619, 720, 127, 481, 931, 816, 813, 233, 566, 247, 
-   985, 724, 205, 454, 863, 491, 741, 242, 949, 214, 
-   733, 859, 335, 708, 621, 574, 73, 654, 730, 472, 
-   419, 436, 278, 496, 867, 210, 399, 680, 480, 51, 
-   878, 465, 811, 169, 869, 675, 611, 697, 867, 561, 
-   862, 687, 507, 283, 482, 129, 807, 591, 733, 623, 
-   150, 238, 59, 379, 684, 877, 625, 169, 643, 105, 
-   170, 607, 520, 932, 727, 476, 693, 425, 174, 647, 
-   73, 122, 335, 530, 442, 853, 695, 249, 445, 515, 
-   909, 545, 703, 919, 874, 474, 882, 500, 594, 612, 
-   641, 801, 220, 162, 819, 984, 589, 513, 495, 799, 
-   161, 604, 958, 533, 221, 400, 386, 867, 600, 782, 
-   382, 596, 414, 171, 516, 375, 682, 485, 911, 276, 
-   98, 553, 163, 354, 666, 933, 424, 341, 533, 870, 
-   227, 730, 475, 186, 263, 647, 537, 686, 600, 224, 
-   469, 68, 770, 919, 190, 373, 294, 822, 808, 206, 
-   184, 943, 795, 384, 383, 461, 404, 758, 839, 887, 
-   715, 67, 618, 276, 204, 918, 873, 777, 604, 560, 
-   951, 160, 578, 722, 79, 804, 96, 409, 713, 940, 
-   652, 934, 970, 447, 318, 353, 859, 672, 112, 785, 
-   645, 863, 803, 350, 139, 93, 354, 99, 820, 908, 
-   609, 772, 154, 274, 580, 184, 79, 626, 630, 742, 
-   653, 282, 762, 623, 680, 81, 927, 626, 789, 125, 
-   411, 521, 938, 300, 821, 78, 343, 175, 128, 250, 
-   170, 774, 972, 275, 999, 639, 495, 78, 352, 126, 
-   857, 956, 358, 619, 580, 124, 737, 594, 701, 612, 
-   669, 112, 134, 694, 363, 992, 809, 743, 168, 974, 
-   944, 375, 748, 52, 600, 747, 642, 182, 862, 81, 
-   344, 805, 988, 739, 511, 655, 814, 334, 249, 515, 
-   897, 955, 664, 981, 649, 113, 974, 459, 893, 228, 
-   433, 837, 553, 268, 926, 240, 102, 654, 459, 51, 
-   686, 754, 806, 760, 493, 403, 415, 394, 687, 700, 
-   946, 670, 656, 610, 738, 392, 760, 799, 887, 653, 
-   978, 321, 576, 617, 626, 502, 894, 679, 243, 440, 
-   680, 879, 194, 572, 640, 724, 926, 56, 204, 700, 
-   707, 151, 457, 449, 797, 195, 791, 558, 945, 679, 
-   297, 59, 87, 824, 713, 663, 412, 693, 342, 606, 
-   134, 108, 571, 364, 631, 212, 174, 643, 304, 329, 
-   343, 97, 430, 751, 497, 314, 983, 374, 822, 928, 
-   140, 206, 73, 263, 980, 736, 876, 478, 430, 305, 
-   170, 514, 364, 692, 829, 82, 855, 953, 676, 246, 
-   369, 970, 294, 750, 807, 827, 150, 790, 288, 923, 
-   804, 378, 215, 828, 592, 281, 565, 555, 710, 82, 
-   896, 831, 547, 261, 524, 462, 293, 465, 502, 56, 
-   661, 821, 976, 991, 658, 869, 905, 758, 745, 193, 
-   768, 550, 608, 933, 378, 286, 215, 979, 792, 961, 
-   61, 688, 793, 644, 986, 403, 106, 366, 905, 644, 
-   372, 567, 466, 434, 645, 210, 389, 550, 919, 135, 
-   780, 773, 635, 389, 707, 100, 626, 958, 165, 504, 
-   920, 176, 193, 713, 857, 265, 203, 50, 668, 108, 
-   645, 990, 626, 197, 510, 357, 358, 850, 858, 364, 
-   936, 638
-};
-
-
-/*-------------------------------------------------------------*/
-/*--- end                                       randtable.c ---*/
-/*-------------------------------------------------------------*/
diff --git a/mdk-stage1/cdrom.c b/mdk-stage1/cdrom.c
deleted file mode 100644
index ef762a3c3..000000000
--- a/mdk-stage1/cdrom.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <sys/mount.h>
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-
-#include "cdrom.h"
-
-
-static int mount_that_cd_device(char * dev_name)
-{
-	char device_fullname[50];
-
-	strcpy(device_fullname, "/dev/");
-	strcat(device_fullname, dev_name);
-
-#ifdef MANDRAKE_MOVE
-	return my_mount(device_fullname, IMAGE_LOCATION, "supermount", 0);
-#else
-	return my_mount(device_fullname, IMAGE_LOCATION, "iso9660", 0);
-#endif
-}
-
-
-static enum return_type try_with_device(char * dev_name, char * dev_model);
-
-static enum return_type do_with_device(char * dev_name, char * dev_model)
-{
-	if (!image_has_stage2()) {
-		enum return_type results;
-		umount(IMAGE_LOCATION);
-		results = ask_yes_no("That CDROM disc does not seem to be a " DISTRIB_NAME " Installation CDROM.\nRetry with another disc?");
-		if (results == RETURN_OK)
-			return try_with_device(dev_name, dev_model);
-		return results;
-	}
-
-	log_message("found a " DISTRIB_NAME " CDROM, good news!");
-
-#ifndef MANDRAKE_MOVE
-	may_load_clp();
-
-	if (!KEEP_MOUNTED)
-		/* in rescue mode, we don't need the media anymore */
-		umount(IMAGE_LOCATION);
-#endif
-
-        add_to_env("METHOD", "cdrom");
-	return RETURN_OK;
-}		
-
-static enum return_type try_with_device(char * dev_name, char * dev_model)
-{
-	wait_message("Trying to access a CDROM disc (drive %s)", dev_model);
-
-	if (mount_that_cd_device(dev_name) == -1) {
-		enum return_type results;
-		char msg[500];
-		unset_automatic(); /* we are in a fallback mode */
-		remove_wait_message();
-
-		snprintf(msg, sizeof(msg), "I can't access a " DISTRIB_NAME " Installation disc in your CDROM drive (%s).\nRetry?", dev_model);
-		results = ask_yes_no(msg);
-		if (results == RETURN_OK)
-			return try_with_device(dev_name, dev_model);
-		return results;
-	}	
-	remove_wait_message();
-
-	return do_with_device(dev_name, dev_model);
-}
-
-int try_automatic(char ** medias, char ** medias_models)
-{
-	static char * already_tried[50] = { NULL };
-	char ** model = medias_models;
-	char ** ptr = medias;
-	int i = 0;
-	while (ptr && *ptr) {
-		char ** p;
-		for (p = already_tried; p && *p; p++)
-			if (streq(*p, *ptr)) 
-				goto try_automatic_already_tried;
-		*p = strdup(*ptr);
-		*(p+1) = NULL;
-
-		wait_message("Trying to access " DISTRIB_NAME " CDROM disc (drive %s)", *model);
-		if (mount_that_cd_device(*ptr) != -1) {
-			if (image_has_stage2()) {
-				remove_wait_message();
-				return i;
-			}
-			else
-				umount(IMAGE_LOCATION);
-		}
-		remove_wait_message();
-
-	try_automatic_already_tried:
-		ptr++;
-		model++;
-		i++;
-	}
-	return -1;
-}
-
-enum return_type cdrom_prepare(void)
-{
-	char ** medias, ** ptr, ** medias_models;
-	char * choice;
-	int i, count = 0;
-	enum return_type results;
-        static int already_probed_ide_generic = 0;
-
-	my_insmod("ide-cd", ANY_DRIVER_TYPE, NULL, 0);
-
-	if (IS_AUTOMATIC) {
-		get_medias(CDROM, &medias, &medias_models, BUS_IDE);
-		if ((i = try_automatic(medias, medias_models)) != -1)
-			return do_with_device(medias[i], medias_models[i]);
-		
-		my_insmod("sr_mod", ANY_DRIVER_TYPE, NULL, 0);
-		get_medias(CDROM, &medias, &medias_models, BUS_SCSI);
-		if ((i = try_automatic(medias, medias_models)) != -1)
-			return do_with_device(medias[i], medias_models[i]);
-		
-		get_medias(CDROM, &medias, &medias_models, BUS_USB);
-		if ((i = try_automatic(medias, medias_models)) != -1)
-			return do_with_device(medias[i], medias_models[i]);
-
-		unset_automatic();
-	} else
-		my_insmod("sr_mod", ANY_DRIVER_TYPE, NULL, 0);
-
-
-	get_medias(CDROM, &medias, &medias_models, BUS_ANY);
-        ptr = medias;
-        while (ptr && *ptr) {
-                count++;
-                ptr++;
-        }
-
-	if (count == 0) {
-                if (!already_probed_ide_generic) {
-                        already_probed_ide_generic = 1;
-                        my_insmod("ide-generic", ANY_DRIVER_TYPE, NULL, 0);
-                        return cdrom_prepare();
-                }
-		stg1_error_message("No CDROM device found.");
-		i = ask_insmod(SCSI_ADAPTERS);
-		if (i == RETURN_BACK)
-			return RETURN_BACK;
-		return cdrom_prepare();
-	}
-
-	if (count == 1) {
-		results = try_with_device(*medias, *medias_models);
-		if (results == RETURN_OK)
-			return RETURN_OK;
-		i = ask_insmod(SCSI_ADAPTERS);
-		if (i == RETURN_BACK)
-			return RETURN_BACK;
-		return cdrom_prepare();
-	}
-
-	results = ask_from_list_comments("Please choose the CDROM drive to use for the installation.", medias, medias_models, &choice);
-	if (results == RETURN_OK) {
-		char ** model = medias_models;
-		ptr = medias;
-		while (ptr && *ptr && model && *model) {
-			if (!strcmp(*ptr, choice))
-				break;
-			ptr++;
-			model++;
-		}
-			results = try_with_device(choice, *model);
-	} else
-		return results;
-
-	if (results == RETURN_OK)
-		return RETURN_OK;
-	if (results == RETURN_BACK)
-		return cdrom_prepare();
-
-	i = ask_insmod(SCSI_ADAPTERS);
-	if (i == RETURN_BACK)
-		return RETURN_BACK;
-	return cdrom_prepare();
-}
diff --git a/mdk-stage1/cdrom.h b/mdk-stage1/cdrom.h
deleted file mode 100644
index c9ebc78aa..000000000
--- a/mdk-stage1/cdrom.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _CDROM_H_
-#define _CDROM_H_
-
-#include "stage1.h"
-
-enum return_type cdrom_prepare(void);
-
-#endif
diff --git a/mdk-stage1/config-stage1.h b/mdk-stage1/config-stage1.h
deleted file mode 100644
index 3fd918ec7..000000000
--- a/mdk-stage1/config-stage1.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _CONFIG_STAGE1_H_
-#define _CONFIG_STAGE1_H_
-
-#ifdef _GNU_SOURCE
-#   undef _GNU_SOURCE
-#endif
-#define _GNU_SOURCE 1
-
-
-/* If we have more than that amount of memory (in Mbytes), we assume we can load the second stage as a ramdisk */
-#define MEM_LIMIT_DRAKX 68
-/* If we have more than that amount of memory (in Mbytes), we preload the second stage as a ramdisk */
-#define MEM_LIMIT_DRAKX_PRELOAD 100
-
-/* If we have more than that amount of memory (in Mbytes), we assume we can load the rescue as a ramdisk */
-#define MEM_LIMIT_RESCUE 40
-/* If we have more than that amount of memory (in Mbytes), we preload the rescue as a ramdisk */
-#define MEM_LIMIT_RESCUE_PRELOAD 100
-
-
-#define SLASH_LOCATION   "/sysroot"
-
-#ifdef MANDRAKE_MOVE
-
-#define MEM_LIMIT_MOVE 120
-
-#undef DISTRIB_NAME
-#define DISTRIB_NAME "Mandrakemove"
-#undef DISTRIB_DESCR
-#define DISTRIB_DESCR DISTRIB_NAME
-
-#define IMAGE_LOCATION_DIR SLASH_LOCATION "/"
-#define IMAGE_LOCATION_REL "cdrom"
-#define IMAGE_LOCATION IMAGE_LOCATION_DIR IMAGE_LOCATION_REL
-
-#define CLP_LOCATION IMAGE_LOCATION
-
-#define STAGE2_LOCATION_ROOTED "/image"
-#define STAGE2_LOCATION SLASH_LOCATION STAGE2_LOCATION_ROOTED
-
-#define BOOT_LOCATION SLASH_LOCATION "/image_boot"
-#define ALWAYS_LOCATION SLASH_LOCATION "/image_always"
-#define TOTEM_LOCATION SLASH_LOCATION "/image_totem"
-
-#else
-
-#define LIVE_LOCATION_REL "install/stage2/live/"
-#define CLP_LOCATION_REL  "install/stage2/"
-#define CLP_STAGE2_NAME "mdkinst.clp"
-#define CLP_RESCUE_NAME "rescue.clp"
-#define CLP_NAME(prefix) (IS_RESCUE ? prefix CLP_RESCUE_NAME : prefix CLP_STAGE2_NAME)
-#define CLP_FILE_REL(prefix) CLP_NAME(prefix CLP_LOCATION_REL)
-
-/* the remote media is mounted in 
-   - IMAGE_LOCATION_DIR "nfsimage", and IMAGE_LOCATION is a symlink image -> nfsimage/mdk/mirror/dir
-   - IMAGE_LOCATION_DIR "hdimage",  and IMAGE_LOCATION is a symlink image -> hdimage/mdk/mirror/dir
-   - directly in IMAGE_LOCATION (for cdroms and .iso images)
- */
-#define IMAGE_LOCATION_DIR SLASH_LOCATION "/tmp/"
-#define IMAGE_LOCATION_REL "image"
-#define IMAGE_LOCATION IMAGE_LOCATION_DIR IMAGE_LOCATION_REL
-
-#define CLP_LOCATION IMAGE_LOCATION "/" CLP_LOCATION_REL
-
-/* - if we use a clp   : STAGE2_LOCATION is a the mount point
-   - if we use the live: STAGE2_LOCATION is a relative symlink to IMAGE_LOCATION_REL/install/stage2/live 
-*/
-#define STAGE2_LOCATION_ROOTED "/tmp/stage2"
-#define STAGE2_LOCATION  SLASH_LOCATION STAGE2_LOCATION_ROOTED
-
-#endif
-
-
-/* user-definable (in Makefile): DISABLE_NETWORK, DISABLE_DISK, DISABLE_CDROM, DISABLE_PCMCIA */
-
-
-/* some factorizing for disabling more features */
-
-#ifdef DISABLE_DISK
-#ifdef DISABLE_CDROM
-#define DISABLE_MEDIAS
-#endif
-#endif
-
-/* path to mirror list for net install */
-#ifndef DISABLE_NETWORK
-#define MIRRORLIST_HOST "www.mandrivalinux.com"
-#define MIRRORLIST_PATH "/mirrorsfull.list"
-#endif
-
-#endif
diff --git a/mdk-stage1/dhcp.c b/mdk-stage1/dhcp.c
deleted file mode 100644
index f5de6543e..000000000
--- a/mdk-stage1/dhcp.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-/*
- * Portions from GRUB  --  GRand Unified Bootloader
- * Copyright (C) 2000  Free Software Foundation, Inc.
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <sys/ioctl.h>
-#include <net/if.h>
-#include <arpa/inet.h>
-#include <net/route.h>
-#include <errno.h>
-#include <net/ethernet.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <sys/time.h>
-#include <time.h>
-#include <fcntl.h>
-#include <sys/poll.h>
-
-#include "stage1.h"
-#include "log.h"
-#include "network.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "dhcp.h"
-
-
-typedef int bp_int32;
-typedef short bp_int16;
-
-#define BOOTP_OPTION_NETMASK		1
-#define BOOTP_OPTION_GATEWAY		3
-#define BOOTP_OPTION_DNS		6
-#define BOOTP_OPTION_HOSTNAME		12
-#define BOOTP_OPTION_DOMAIN		15
-#define BOOTP_OPTION_BROADCAST		28
-
-#define DHCP_OPTION_REQADDR		50
-#define DHCP_OPTION_LEASE		51
-#define DHCP_OPTION_TYPE		53
-#define DHCP_OPTION_SERVER		54
-#define DHCP_OPTION_OPTIONREQ		55
-#define DHCP_OPTION_MAXSIZE		57
-
-#define DHCP_OPTION_CLIENT_IDENTIFIER	61
-
-#define BOOTP_CLIENT_PORT	68
-#define BOOTP_SERVER_PORT	67
-
-#define BOOTP_OPCODE_REQUEST	1
-#define BOOTP_OPCODE_REPLY	2
-
-#define DHCP_TYPE_DISCOVER	1
-#define DHCP_TYPE_OFFER		2
-#define DHCP_TYPE_REQUEST	3
-#define DHCP_TYPE_ACK		5
-#define DHCP_TYPE_RELEASE	7
-
-#define BOOTP_VENDOR_LENGTH	64
-#define DHCP_VENDOR_LENGTH	340
-
-struct bootp_request {
-	char opcode;
-	char hw;
-	char hwlength;
-	char hopcount;
-	bp_int32 id;
-	bp_int16 secs;
-	bp_int16 flags;
-	bp_int32 ciaddr, yiaddr, server_ip, bootp_gw_ip;
-	char hwaddr[16];
-	char servername[64];
-	char bootfile[128];
-	char vendor[DHCP_VENDOR_LENGTH];
-} ;
-
-static const char vendor_cookie[] = { 99, 130, 83, 99, 255 };
-
-
-static unsigned int verify_checksum(void * buf2, int length2)
-{
-	unsigned int csum = 0;
-	unsigned short * sp;
-
-	for (sp = (unsigned short *) buf2; length2 > 0; (length2 -= 2), sp++)
-		csum += *sp;
-	
-	while (csum >> 16)
-		csum = (csum & 0xffff) + (csum >> 16);
-
-	return (csum == 0xffff);
-}
-
-
-static int initial_setup_interface(char * device, int s) {
-	struct sockaddr_in * addrp;
-	struct ifreq req;
-	struct rtentry route;
-	int true = 1;
-	
-	addrp = (struct sockaddr_in *) &req.ifr_addr;
-	
-	strcpy(req.ifr_name, device);
-	addrp->sin_family = AF_INET;
-	addrp->sin_port = 0;
-	memset(&addrp->sin_addr, 0, sizeof(addrp->sin_addr));
-	
-	req.ifr_flags = 0; /* take it down */
-	if (ioctl(s, SIOCSIFFLAGS, &req)) {
-		log_perror("SIOCSIFFLAGS (downing)");
-		return -1;
-	}
-    
-	addrp->sin_family = AF_INET;
-	addrp->sin_addr.s_addr = htonl(0);
-	if (ioctl(s, SIOCSIFADDR, &req)) {
-		log_perror("SIOCSIFADDR");
-		return -1;
-	}
-
-	req.ifr_flags = IFF_UP | IFF_BROADCAST | IFF_RUNNING;
-	if (ioctl(s, SIOCSIFFLAGS, &req)) {
-		log_perror("SIOCSIFFLAGS (upping)");
-		return -1;
-	}
-
-	memset(&route, 0, sizeof(route));
-	memcpy(&route.rt_gateway, addrp, sizeof(*addrp));
-	
-	addrp->sin_family = AF_INET;
-	addrp->sin_port = 0;
-	addrp->sin_addr.s_addr = INADDR_ANY;
-	memcpy(&route.rt_dst, addrp, sizeof(*addrp));
-	memcpy(&route.rt_genmask, addrp, sizeof(*addrp));
-	
-	route.rt_dev = device;
-	route.rt_flags = RTF_UP;
-	route.rt_metric = 0;
-	
-	if (ioctl(s, SIOCADDRT, &route)) {
-		if (errno != EEXIST) {
-			close(s);
-			log_perror("SIOCADDRT");
-			return -1;
-		}
-	}
-	
-	if (setsockopt(s, SOL_SOCKET, SO_BROADCAST, &true, sizeof(true))) {
-		close(s);
-		log_perror("setsockopt");
-		return -1;
-	}
-
-	/* I need to sleep a bit in order for kernel to finish init of the
-           network device; this would allow to not send further multiple
-           dhcp requests when only one is needed. */
-	wait_message("Bringing up networking...");
-	sleep(2);
-	remove_wait_message();
-
-	return 0;
-}
-
-
-void set_missing_ip_info(struct interface_info * intf)
-{
-	bp_int32 ipNum = *((bp_int32 *) &intf->ip);
-	bp_int32 nmNum;
-
-	if (intf->netmask.s_addr == 0)
-		inet_aton(guess_netmask(inet_ntoa(intf->ip)), &intf->netmask);
-
-	nmNum = *((bp_int32 *) &intf->netmask);
-
-	if (intf->broadcast.s_addr == 0)
-		*((bp_int32 *) &intf->broadcast) = (ipNum & nmNum) | ~(nmNum);
-
-	if (intf->network.s_addr == 0)
-		*((bp_int32 *) &intf->network) = ipNum & nmNum;
-}
-
-static void parse_reply(struct bootp_request * breq, struct interface_info * intf)
-{
-	unsigned char * chptr;
-	unsigned char option, length;
-
-	if (breq->bootfile && strlen(breq->bootfile) > 0) {
-                if (IS_NETAUTO)
-                        add_to_env("KICKSTART", breq->bootfile);
-                else
-                        log_message("warning: ignoring `bootfile' DHCP server parameter, since `netauto' boot parameter was not given; reboot with `linux netauto' (and anymore useful boot parameters) if you want `bootfile' to be used as a `auto_inst.cfg.pl' stage2 configuration file");
-        }
-	
-	memcpy(&intf->ip, &breq->yiaddr, 4);
-
-	chptr = (unsigned char *) breq->vendor;
-	chptr += 4;
-	while (*chptr != 0xFF && (void *) chptr < (void *) breq->vendor + DHCP_VENDOR_LENGTH) {
-		char tmp_str[500];
-		option = *chptr++;
-		if (!option)
-			continue;
-		length = *chptr++;
-
-		switch (option) {
-		case BOOTP_OPTION_DNS:
-			memcpy(&dns_server, chptr, sizeof(dns_server));
-			log_message("got dns %s", inet_ntoa(dns_server));
-			if (length >= sizeof(dns_server)*2) {
-				memcpy(&dns_server2, chptr+sizeof(dns_server), sizeof(dns_server2));
-				log_message("got dns2 %s", inet_ntoa(dns_server2));
-			}
-			break;
-
-		case BOOTP_OPTION_NETMASK:
-			memcpy(&intf->netmask, chptr, sizeof(intf->netmask));
-			log_message("got netmask %s", inet_ntoa(intf->netmask));
-			break;
-		    
-		case BOOTP_OPTION_DOMAIN:
-			memcpy(tmp_str, chptr, length);
-			tmp_str[length] = '\0';
-			domain = strdup(tmp_str);
-			log_message("got domain %s", domain);
-			break;
-
-		case BOOTP_OPTION_BROADCAST:
-			memcpy(&intf->broadcast, chptr, sizeof(intf->broadcast));
-			log_message("got broadcast %s", inet_ntoa(intf->broadcast));
-			break;
-
-		case BOOTP_OPTION_GATEWAY:
-			memcpy(&gateway, chptr, sizeof(gateway));
-			log_message("got gateway %s", inet_ntoa(gateway));
-			break;
-
-		}
-
-		chptr += length;
-	}
-
-	set_missing_ip_info(intf);
-}
-
-
-static void init_vendor_codes(struct bootp_request * breq) {
-	memcpy(breq->vendor, vendor_cookie, sizeof(vendor_cookie));
-}
-
-static char gen_hwaddr[16];
-
-static int prepare_request(struct bootp_request * breq, int sock, char * device)
-{
-	struct ifreq req;
-	
-	memset(breq, 0, sizeof(*breq));
-	
-	breq->opcode = BOOTP_OPCODE_REQUEST;
-	
-	strcpy(req.ifr_name, device);
-	if (ioctl(sock, SIOCGIFHWADDR, &req)) {
-		log_perror("SIOCSIFHWADDR");
-		return -1;
-	}
-	
-	breq->hw = req.ifr_hwaddr.sa_family;
-	breq->hwlength = IFHWADDRLEN;	
-	memcpy(breq->hwaddr, req.ifr_hwaddr.sa_data, IFHWADDRLEN);
-	memcpy(gen_hwaddr, req.ifr_hwaddr.sa_data, IFHWADDRLEN);
-	
-	breq->hopcount = 0;
-	
-	init_vendor_codes(breq);
-	
-	return 0;
-}
-
-static int get_vendor_code(struct bootp_request * bresp, unsigned char option, void * data)
-{
-	unsigned char * chptr;
-	unsigned int length, theOption;
-	
-	chptr = (unsigned char*) bresp->vendor + 4;
-	while (*chptr != 0xFF && *chptr != option) {
-		theOption = *chptr++;
-		if (!theOption)
-			continue;
-		length = *chptr++;
-		chptr += length;
-	}
-	
-	if (*chptr++ == 0xff)
-		return 1;
-	
-	length = *chptr++;
-	memcpy(data, chptr, length);
-	
-	return 0;
-}
-
-
-static unsigned long currticks(void)
-{
-	struct timeval tv;
-	unsigned long csecs;
-	unsigned long ticks_per_csec, ticks_per_usec;
-	
-	/* Note: 18.2 ticks/sec.  */
-	
-	gettimeofday (&tv, 0);
-	csecs = tv.tv_sec / 10;
-	ticks_per_csec = csecs * 182;
-	ticks_per_usec = (((tv.tv_sec - csecs * 10) * 1000000 + tv.tv_usec) * 182 / 10000000);
-	return ticks_per_csec + ticks_per_usec;
-}
-
-
-#define BACKOFF_LIMIT 7
-#define	TICKS_PER_SEC 18
-#define MAX_ARP_RETRIES	7
-
-static void rfc951_sleep(int exp)
-{
-	static long seed = 0;
-	long q;
-	unsigned long tmo;
-	
-	if (exp > BACKOFF_LIMIT)
-		exp = BACKOFF_LIMIT;
-	
-	if (!seed)
-		/* Initialize linear congruential generator.  */
-		seed = (currticks () + *(long *) &gen_hwaddr + ((short *) gen_hwaddr)[2]);
-  
-	/* Simplified version of the LCG given in Bruce Scheier's
-	   "Applied Cryptography".  */
-	q = seed / 53668;
-	if ((seed = 40014 * (seed - 53668 * q) - 12211 * q) < 0)
-		seed += 2147483563l;
-	
-	/* Compute mask.  */
-	for (tmo = 63; tmo <= 60 * TICKS_PER_SEC && --exp > 0; tmo = 2 * tmo + 1)
-		;
-  
-	/* Sleep.  */
-	log_message("<sleep>");
-	
-	for (tmo = (tmo & seed) + currticks (); currticks () < tmo;);
-}
-
-
-static int handle_transaction(int s, struct bootp_request * breq, struct bootp_request * bresp,
-			      struct sockaddr_in * server_addr, int dhcp_type)
-{
-	struct pollfd polls;
-	int i, j;
-	int retry = 1;
-	int sin;
-	char eth_packet[ETH_FRAME_LEN];
-	struct iphdr * ip_hdr;
-	struct udphdr * udp_hdr;
-	unsigned char type;
-	unsigned long starttime;
-	int timeout = 1;
-
-	breq->id = starttime = currticks();
-	breq->secs = 0;
-
-	sin = socket(AF_PACKET, SOCK_DGRAM, ntohs(ETH_P_IP));
-	if (sin < 0) {
-		log_perror("af_packet socket");
-		return -1;
-	}
-
-	while (retry <= MAX_ARP_RETRIES) {
-		i = sizeof(*breq);
-
-		if (sendto(s, breq, i, 0, (struct sockaddr *) server_addr, sizeof(*server_addr)) != i) {
-			close(s);
-			log_perror("sendto");
-			return -1;
-		}
-		
-		polls.fd = sin;
-		polls.events = POLLIN;
-
-		while (poll(&polls, 1, timeout*1000) == 1) {
-
-			if ((j = recv(sin, eth_packet, sizeof(eth_packet), 0)) == -1) {
-				log_perror("recv");
-				continue;
-			}
-			
-			/* We need to do some basic sanity checking of the header */
-			if (j < (signed)(sizeof(*ip_hdr) + sizeof(*udp_hdr)))
-				continue;
-			
-			ip_hdr = (void *) eth_packet;
-			if (!verify_checksum(ip_hdr, sizeof(*ip_hdr)))
-				continue;
-
-			if (ntohs(ip_hdr->tot_len) > j)
-				continue;
-
-			j = ntohs(ip_hdr->tot_len);
-			
-			if (ip_hdr->protocol != IPPROTO_UDP)
-				continue;
-			
-			udp_hdr = (void *) (eth_packet + sizeof(*ip_hdr));
-
-			if (ntohs(udp_hdr->source) != BOOTP_SERVER_PORT)
-				continue;
-			
-			if (ntohs(udp_hdr->dest) != BOOTP_CLIENT_PORT)
-				continue;
-			/* Go on with this packet; it looks sane */
-			
-			/* Originally copied sizeof (*bresp) - this is a security
-			   problem due to a potential underflow of the source
-			   buffer.  Also, it trusted that the packet was properly
-			   0xFF terminated, which is not true in the case of the
-			   DHCP server on Cisco 800 series ISDN router. */
-			
-			memset (bresp, 0xFF, sizeof (*bresp));
-			memcpy (bresp, (char *) udp_hdr + sizeof (*udp_hdr), j - sizeof (*ip_hdr) - sizeof (*udp_hdr));
-			
-			/* sanity checks */
-			if (bresp->id != breq->id)
-				continue;
-			if (bresp->opcode != BOOTP_OPCODE_REPLY)
-				continue;
-			if (bresp->hwlength != breq->hwlength)
-				continue;
-			if (memcmp(bresp->hwaddr, breq->hwaddr, bresp->hwlength))
-				continue;
-			if (get_vendor_code(bresp, DHCP_OPTION_TYPE, &type) || type != dhcp_type)
-				continue;
-			if (memcmp(bresp->vendor, vendor_cookie, 4))
-				continue;
-			return 0;
-		}
-		rfc951_sleep(retry);
-		breq->secs = htons ((currticks () - starttime) / 20);
-		retry++;
-		timeout *= 2;
-		if (timeout > 5)
-			timeout = 5;
-	}
-	
-	return -1;
-}
-
-static void add_vendor_code(struct bootp_request * breq, unsigned char option, unsigned char length, void * data)
-{
-	unsigned char * chptr;
-	int theOption, theLength;
-
-	chptr = (unsigned char*) breq->vendor;
-	chptr += 4;
-	while (*chptr != 0xFF && *chptr != option) {
-		theOption = *chptr++;
-		if (!theOption) continue;
-		theLength = *chptr++;
-		chptr += theLength;
-	}
-
-	*chptr++ = option;
-	*chptr++ = length;
-	memcpy(chptr, data, length);
-	chptr[length] = 0xff;
-}
-
-
-char * dhcp_hostname = NULL;
-char * dhcp_domain = NULL;
-
-enum return_type perform_dhcp(struct interface_info * intf)
-{
-	int s, i;
-	struct sockaddr_in server_addr;
-	struct sockaddr_in client_addr;
-	struct sockaddr_in broadcast_addr;
-	struct bootp_request breq, bresp;
-	unsigned char messageType;
-	unsigned int lease;
-	short aShort;
-	int num_options;
-	char requested_options[50];
-	char * client_id_str, * client_id_hwaddr;
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-		log_perror("socket");
-		return RETURN_ERROR;
-	}
-
-	{
-		enum return_type results;
-		char * questions[] = { "Host name", "Domain name", NULL };
-		char * questions_auto[] = { "hostname", "domain" };
-		static char ** answers = NULL;
-		char * boulet;
-
-		client_id_str = client_id_hwaddr = NULL;
-		
-		results = ask_from_entries_auto("If the DHCP server needs to know you by name; please fill in this information. "
-						"Valid answers are for example: `mybox' for hostname and `mynetwork.com' for "
-						"domain name, for a machine called `mybox.mynetwork.com' on the Internet.",
-						questions, &answers, 32, questions_auto, NULL);
-		if (results == RETURN_OK)
-		{
-			dhcp_hostname = answers[0];
-			if ((boulet = strchr(dhcp_hostname, '.')) != NULL)
-				boulet[0] = '\0';
-			dhcp_domain = answers[1];
-			
-			if (*dhcp_hostname && *dhcp_domain) {
-				/* if we have both, then create client id from them */
-				client_id_str = malloc(1 + strlen(dhcp_hostname) + 1 + strlen(dhcp_domain) + 1);
-				client_id_str[0] = '\0';
-				sprintf(client_id_str+1, "%s.%s", dhcp_hostname, dhcp_domain);
-			}
-		}
-	}
-
-	if (initial_setup_interface(intf->device, s) != 0) {
-		close(s);
-		return RETURN_ERROR;
-	}
-
-	if (prepare_request(&breq, s, intf->device) != 0) {
-		close(s);
-		return RETURN_ERROR;
-	}
-
-	messageType = DHCP_TYPE_DISCOVER;
-	add_vendor_code(&breq, DHCP_OPTION_TYPE, 1, &messageType);
-
-	/* add pieces needed to have DDNS/DHCP IP selection based on requested name */
-	if (dhcp_hostname && *dhcp_hostname) { /* pick client id form based on absence or presence of domain name */
-		if (*dhcp_domain) /* alternate style <hostname>.<domainname> */
-			add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, strlen(client_id_str+1)+1, client_id_str);
-		else {  /* usual style (aka windows / dhcpcd) */
-			/* but put MAC in form required for client identifier first */
-			client_id_hwaddr = malloc(IFHWADDRLEN+2);
-			/* (from pump-0.8.22/dhcp.c)
-			 * Microsoft uses a client identifier field of the 802.3 address with a
-			 * pre-byte of a "1".  In order to re-use the DHCP address that they set
-			 * for this interface, we have to mimic their identifier.
-			 */
-			client_id_hwaddr[0] = 1;  /* set flag for ethernet */
-			memcpy(client_id_hwaddr+1, gen_hwaddr, IFHWADDRLEN);
-			add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, IFHWADDRLEN+1, client_id_hwaddr);
-		}
-		/* this is the one that the dhcp server really wants for DDNS updates */
-		add_vendor_code(&breq, BOOTP_OPTION_HOSTNAME, strlen(dhcp_hostname), dhcp_hostname);
-		log_message("DHCP: telling server to use name = %s", dhcp_hostname);
-	}
-
-	memset(&client_addr.sin_addr, 0, sizeof(&client_addr.sin_addr));
-	client_addr.sin_family = AF_INET;
-	client_addr.sin_port = htons(BOOTP_CLIENT_PORT);	/* bootp client */
-
-	if (bind(s, (struct sockaddr *) &client_addr, sizeof(client_addr))) {
-		log_perror("bind");
-		return RETURN_ERROR;
-	}
-
-	broadcast_addr.sin_family = AF_INET;
-	broadcast_addr.sin_port = htons(BOOTP_SERVER_PORT);	/* bootp server */
-	memset(&broadcast_addr.sin_addr, 0xff, sizeof(broadcast_addr.sin_addr));  /* broadcast */
-
-	log_message("DHCP: sending DISCOVER");
-
-	wait_message("Sending DHCP request...");
-	i = handle_transaction(s, &breq, &bresp, &broadcast_addr, DHCP_TYPE_OFFER);
-	remove_wait_message();
-
-	if (i != 0) {
-		stg1_error_message("No DHCP reply received.");
-		close(s);
-		return RETURN_ERROR;
-	}
-
-	server_addr.sin_family = AF_INET;
-	server_addr.sin_port = htons(BOOTP_SERVER_PORT);	/* bootp server */
-	if (get_vendor_code(&bresp, DHCP_OPTION_SERVER, &server_addr.sin_addr)) {
-		close(s);
-		log_message("DHCPOFFER didn't include server address");
-		return RETURN_ERROR;
-	}
-
-	init_vendor_codes(&breq);
-	messageType = DHCP_TYPE_REQUEST;
-	add_vendor_code(&breq, DHCP_OPTION_TYPE, 1, &messageType);
-	add_vendor_code(&breq, DHCP_OPTION_SERVER, 4, &server_addr.sin_addr);
-	add_vendor_code(&breq, DHCP_OPTION_REQADDR, 4, &bresp.yiaddr);
-
-	/* if used the first time, then have to use it again */
-	if (dhcp_hostname && *dhcp_hostname) { /* add pieces needed to have DDNS/DHCP IP selection based on requested name */
-		if (dhcp_domain && *dhcp_domain) /* alternate style */
-			add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, strlen(client_id_str+1)+1, client_id_str);
-		else /* usual style (aka windows / dhcpcd) */
-			add_vendor_code(&breq, DHCP_OPTION_CLIENT_IDENTIFIER, IFHWADDRLEN+1, client_id_hwaddr);
-		/* this is the one that the dhcp server really wants for DDNS updates */
-		add_vendor_code(&breq, BOOTP_OPTION_HOSTNAME, strlen(dhcp_hostname), dhcp_hostname);
-	}
-
-	aShort = ntohs(sizeof(struct bootp_request));
-	add_vendor_code(&breq, DHCP_OPTION_MAXSIZE, 2, &aShort);
-
-	num_options = 0;
-	requested_options[num_options++] = BOOTP_OPTION_NETMASK;
-	requested_options[num_options++] = BOOTP_OPTION_GATEWAY;
-	requested_options[num_options++] = BOOTP_OPTION_DNS;
-	requested_options[num_options++] = BOOTP_OPTION_DOMAIN;
-	requested_options[num_options++] = BOOTP_OPTION_BROADCAST;
-	add_vendor_code(&breq, DHCP_OPTION_OPTIONREQ, num_options, requested_options);
-
-	/* request a lease of 1 hour */
-	i = htonl(60 * 60);
-	add_vendor_code(&breq, DHCP_OPTION_LEASE, 4, &i);
-
-	log_message("DHCP: sending REQUEST");
-
-	i = handle_transaction(s, &breq, &bresp, &broadcast_addr, DHCP_TYPE_ACK);
-
-	if (i != 0) {
-		close(s);
-		return RETURN_ERROR;
-	}
-
-	if (get_vendor_code(&bresp, DHCP_OPTION_LEASE, &lease)) {
-		log_message("failed to get lease time\n");
-		return RETURN_ERROR;
-	}
-	lease = ntohl(lease);
-
-	close(s);
-
-	intf->netmask.s_addr = 0;
-	intf->broadcast.s_addr = 0;
-	intf->network.s_addr = 0;
-
-	parse_reply(&bresp, intf);
-
-	return RETURN_OK;
-}
diff --git a/mdk-stage1/dhcp.h b/mdk-stage1/dhcp.h
deleted file mode 100644
index d1ad8ae9e..000000000
--- a/mdk-stage1/dhcp.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * View the homepage: http://us.mandrakesoft.com/~gc/html/stage1.html
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- *  Portions from GRUB  --  GRand Unified Bootloader
- *  Copyright (C) 2000  Free Software Foundation, Inc.
- *
- *  Itself based on etherboot-4.6.4 by Martin Renters.
- *
- */
-
-#ifndef _DHCP_H_
-#define _DHCP_H_
-
-#include "stage1.h"
-#include "network.h"
-
-enum return_type perform_dhcp(struct interface_info * intf);
-
-extern char * dhcp_hostname;
-extern char * dhcp_domain;
-
-#endif
diff --git a/mdk-stage1/directory.c b/mdk-stage1/directory.c
deleted file mode 100644
index 6115b600c..000000000
--- a/mdk-stage1/directory.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- * Olivier Blin (oblin@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <unistd.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <libgen.h>
-#include "stage1.h"
-#include "frontend.h"
-#include "log.h"
-#include "lomount.h"
-
-char * extract_list_directory(char * direct)
-{
-	char ** full = list_directory(direct);
-	char tmp[20000] = "";
-	int i;
-	for (i=0; i<50 ; i++) {
-		if (!full || !*full)
-			break;
-		strcat(tmp, *full);
-		strcat(tmp, "\n");
-		full++;
-	}
-	return strdup(tmp);
-}
-
-static void choose_iso_in_directory(char *directory, char *location_full) 
-{
-	char **file;
-	char *stage2_isos[100] = { "Use directory as a mirror tree", "-----" };
-	int stage2_iso_number = 2;
-
-	log_message("\"%s\" exists and is a directory, looking for iso files", directory);
-
-	for (file = list_directory(directory); *file; file++) {
-		char isofile[500];
-		char * loopdev = NULL;
-
-		if (strstr(*file, ".iso") != *file + strlen(*file) - 4)
-			/* file doesn't end in .iso, skipping */
-			continue;
-			
-		strcpy(isofile, directory);
-		strcat(isofile, "/");
-		strcat(isofile, *file);
-
-		if (lomount(isofile, IMAGE_LOCATION, &loopdev, 0)) {
-			log_message("unable to mount iso file \"%s\", skipping", isofile);
-			continue;
-		}
-
-		if (image_has_stage2()) {
-			log_message("stage2 installer found in ISO image \"%s\"", isofile);
-			stage2_isos[stage2_iso_number++] = strdup(*file);
-		} else {
-			log_message("ISO image \"%s\" doesn't contain stage2 installer", isofile);
-		}
-
-		umount(IMAGE_LOCATION);
-		del_loop(loopdev);
-	}
-
-	stage2_isos[stage2_iso_number] = NULL;
-
-	if (stage2_iso_number > 2) {
-		enum return_type results;
-		do {
-			results = ask_from_list("Please choose the ISO image to be used to install the "
-						DISTRIB_NAME " Distribution.",
-						stage2_isos, file);
-			if (results == RETURN_BACK) {
-				return;
-			} else if (results == RETURN_OK) {
-				if (!strcmp(*file, stage2_isos[0])) {
-					/* use directory as a mirror tree */
-					continue;
-				} else if (!strcmp(*file, stage2_isos[1])) {
-					/* the separator has been selected */
-					results = RETURN_ERROR;
-					continue;
-				} else {
-					/* use selected ISO image */
-					strcat(location_full, "/");
-					strcat(location_full, *file);
-					log_message("installer will use ISO image \"%s\"", location_full);
-				}
-			}
-		} while (results == RETURN_ERROR);
-	} else {
-		log_message("no ISO image found in \"%s\" directory", location_full);
-	}
-}
-
-
-enum return_type try_with_directory(char *directory, char *method_live, char *method_iso) {
-	char location_full[500];
-        char * loopdev = NULL;
-	struct stat statbuf;
-	enum return_type ret = RETURN_OK;
-
-	unlink(IMAGE_LOCATION);
-	strcpy(location_full, directory);
-
-#ifndef MANDRAKE_MOVE
-	if (!stat(directory, &statbuf) && S_ISDIR(statbuf.st_mode)) {
-		choose_iso_in_directory(directory, location_full);
-	}
-#endif
-
-	loopdev = NULL;
-	if (!stat(location_full, &statbuf) && !S_ISDIR(statbuf.st_mode)) {
-		log_message("%s exists and is not a directory, assuming this is an ISO image", location_full);
-		if (lomount(location_full, IMAGE_LOCATION, &loopdev, 0)) {
-			stg1_error_message("Could not mount file %s as an ISO image of the " DISTRIB_NAME " Distribution.", location_full);
-			return RETURN_ERROR;
-		}
-		add_to_env("ISOPATH", location_full);
-		add_to_env("METHOD", method_iso);
-	} else {
-		int offset = strncmp(location_full, IMAGE_LOCATION_DIR, sizeof(IMAGE_LOCATION_DIR) - 1) == 0 ? sizeof(IMAGE_LOCATION_DIR) - 1 : 0;
-		log_message("assuming %s is a mirror tree", location_full + offset);
-
-		rmdir(IMAGE_LOCATION); /* useful if we loopback mounted it */
-		symlink(location_full + offset, IMAGE_LOCATION);
-		add_to_env("METHOD", method_live);
-	}
-
-#ifdef MANDRAKE_MOVE
-	if (access(IMAGE_LOCATION "/live_tree/etc/fstab", R_OK) && access(IMAGE_LOCATION "/live_tree.clp", R_OK)) {
-		stg1_error_message("I can't find the " DISTRIB_NAME " Distribution in the specified directory. "
-				   "(I need the file " IMAGE_LOCATION "/live_tree/etc/fstab" ")\n"
-				   "Here's a short extract of the files in the directory:\n"
-				   "%s", extract_list_directory(IMAGE_LOCATION));
-		ret = RETURN_BACK;
-	}
-#else
-	if (access(IMAGE_LOCATION "/" CLP_LOCATION_REL, R_OK)) {
-		stg1_error_message("I can't find the " DISTRIB_NAME " Distribution in the specified directory. "
-				   "(I need the subdirectory " CLP_LOCATION_REL ")\n"
-				   "Here's a short extract of the files in the directory:\n"
-				   "%s", extract_list_directory(IMAGE_LOCATION));
-		ret = RETURN_BACK;
-	} else if (may_load_clp() != RETURN_OK) {
-		stg1_error_message("Could not load program into memory.");
-		ret = RETURN_ERROR;
-	}
-
-	if (ret == RETURN_OK)
-		log_message("found the " DISTRIB_NAME " Installation, good news!");
-
-#endif
-	if (!KEEP_MOUNTED || ret != RETURN_OK) {
-		/* in rescue mode, we don't need the media anymore */
-		umount(IMAGE_LOCATION);
-		del_loop(loopdev);
-	}	
-
-	return ret;
-}
diff --git a/mdk-stage1/directory.h b/mdk-stage1/directory.h
deleted file mode 100644
index eb744520b..000000000
--- a/mdk-stage1/directory.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- * Olivier Blin (oblin@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _DIRECTORY_H_
-#define _DIRECTORY_H_
-
-char * extract_list_directory(char * direct);
-enum return_type try_with_directory(char *location_full, char *method_live, char *method_iso);
-
-#endif
diff --git a/mdk-stage1/disk.c b/mdk-stage1/disk.c
deleted file mode 100644
index e3e84d7da..000000000
--- a/mdk-stage1/disk.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <libgen.h>
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-#include "lomount.h"
-#include "automatic.h"
-#include "directory.h"
-#include "partition.h"
-
-#include "disk.h"
-
-static enum return_type try_with_device(char *dev_name)
-{
-	char * questions_location[] = { "Directory or ISO images directory or ISO image", NULL };
-	char * questions_location_auto[] = { "directory", NULL };
-	static char ** answers_location = NULL;
-	char location_full[500];
-
-	char * disk_own_mount = IMAGE_LOCATION_DIR "hdimage";
-
-	char * parts[50];
-	char * parts_comments[50];
-	enum return_type results;
-	char * choice;
-        
-        if (list_partitions(dev_name, parts, parts_comments)) {
-		stg1_error_message("Could not read partitions information.");
-		return RETURN_ERROR;
-        }
-
-        /* uglyness to allow auto starting with devfs */
-        if (!IS_AUTOMATIC || streq((choice = get_auto_value("partition")), "")) {
-                if (parts[0] == NULL) {
-                        stg1_error_message("No partition found.");
-                        return RETURN_ERROR;
-                }
-
-                results = ask_from_list_comments_auto("Please select the partition containing the copy of the "
-						      DISTRIB_NAME " Distribution install source.",
-                                                      parts, parts_comments, &choice, "partition", parts);
-                if (results != RETURN_OK)
-                        return results;
-        }
-
-	/* in testing mode, assume the partition is already mounted on IMAGE_LOCATION_DIR "hdimage" */
-        if (!IS_TESTING && try_mount(choice, disk_own_mount)) {
-		stg1_error_message("I can't find a valid filesystem (tried: ext2, vfat, ntfs, reiserfs). "
-                                   "Make sure the partition has been cleanly unmounted.");
-		return try_with_device(dev_name);
-	}
-
- ask_dir:
-	if (ask_from_entries_auto("Please enter the directory (or ISO image file) containing the "
-				  DISTRIB_NAME " Distribution install source.",
-				  questions_location, &answers_location, 24, questions_location_auto, NULL) != RETURN_OK) {
-		umount(disk_own_mount);
-		return try_with_device(dev_name);
-	}
-
-	strcpy(location_full, disk_own_mount);
-	strcat(location_full, "/");
-	strcat(location_full, answers_location[0]);
-
-	if (access(location_full, R_OK)) {
-		char * path = strdup(answers_location[0]);
-		stg1_error_message("Directory or ISO image file could not be found on partition.\n"
-			      "Here's a short extract of the files in the directory %s:\n"
-			      "%s", dirname(path), extract_list_directory(dirname(location_full)));
-		free(path);
-		goto ask_dir;
-	}
-
-	results = try_with_directory(location_full, "disk", "disk-iso");
-	if (results != RETURN_OK) {
-		goto ask_dir;
-	}
-
-	if (!KEEP_MOUNTED)
-		umount(disk_own_mount);
-
-	return RETURN_OK;
-}
-
-enum return_type disk_prepare(void)
-{
-	char ** medias, ** medias_models;
-	char * choice;
-	int i;
-	enum return_type results;
-        static int already_probed_ide_generic = 0;
-
-        int count = get_disks(&medias, &medias_models);
-
-	if (count == 0) {
-                if (!already_probed_ide_generic) {
-                        already_probed_ide_generic = 1;
-                        my_insmod("ide-generic", ANY_DRIVER_TYPE, NULL, 0);
-                        return disk_prepare();
-                }
-		stg1_error_message("No DISK drive found.");
-		i = ask_insmod(SCSI_ADAPTERS);
-		if (i == RETURN_BACK)
-			return RETURN_BACK;
-		return disk_prepare();
-	}
-
-	if (count == 1) {
-		results = try_with_device(*medias);
-		if (results != RETURN_ERROR)
-			return results;
-		i = ask_insmod(SCSI_ADAPTERS);
-		if (i == RETURN_BACK)
-			return RETURN_BACK;
-		return disk_prepare();
-	}
-
-	results = ask_from_list_comments_auto("Please select the disk containing the copy of the "
-					      DISTRIB_NAME " Distribution install source.",
-					      medias, medias_models, &choice, "disk", medias);
-
-	if (results != RETURN_OK)
-		return results;
-
-	results = try_with_device(choice);
-	if (results != RETURN_ERROR)
-		return results;
-	i = ask_insmod(SCSI_ADAPTERS);
-	if (i == RETURN_BACK)
-		return RETURN_BACK;
-	return disk_prepare();
-}
diff --git a/mdk-stage1/disk.h b/mdk-stage1/disk.h
deleted file mode 100644
index fae890894..000000000
--- a/mdk-stage1/disk.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _DISK_H_
-#define _DISK_H_
-
-enum return_type disk_prepare(void);
-
-#endif
diff --git a/mdk-stage1/dns.c b/mdk-stage1/dns.c
deleted file mode 100644
index 1d7d2d6c8..000000000
--- a/mdk-stage1/dns.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-
-// dietlibc can do hostname lookup, whereas glibc can't when linked statically :-(
-
-#if defined(__dietlibc__)
-
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <netdb.h>
-#include <sys/socket.h>
-#include <resolv.h>
-
-#include "network.h"
-#include "log.h"
-
-#include "dns.h"
-
-int mygethostbyname(char * name, struct in_addr * addr)
-{
-	struct hostent * h;
-
-	/* prevent from timeouts */
-	if (_res.nscount == 0) 
-		return -1;
-
-	h = gethostbyname(name);
-
-	if (!h && domain) {
-		// gethostbyname from dietlibc doesn't support domain handling
-		char fully_qualified[500];
-		sprintf(fully_qualified, "%s.%s", name, domain);
-		h = gethostbyname(fully_qualified);
-	}
-
-	if (h && h->h_addr_list && (h->h_addr_list)[0]) {
-		memcpy(addr, (h->h_addr_list)[0], sizeof(*addr));
-		log_message("is-at: %s", inet_ntoa(*addr));
-		return 0;
-	}
-
-	log_message("unknown host %s", name);
-	return -1;
-}
-
-char * mygethostbyaddr(char * ipnum)
-{
-	struct in_addr in;
-	struct hostent * host;
-
-        /* prevent from timeouts */
-        if (_res.nscount == 0) 
-                return NULL;
-
-	if (!inet_aton(ipnum, &in))
-		return NULL;
-	host = gethostbyaddr(&(in.s_addr), sizeof(in.s_addr) /* INADDRSZ */, AF_INET);
-	if (host && host->h_name)
-		return host->h_name;
-	return NULL;
-}
-
-#elif defined(__GLIBC__)
-  
-#include <alloca.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <resolv.h>
-#include <arpa/nameser.h>
-#include <arpa/inet.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "log.h"
-
-#include "dns.h"
-
-/* This is dumb, but glibc doesn't like to do hostname lookups w/o libc.so */
-
-union dns_response {
-    HEADER hdr;
-    u_char buf[PACKETSZ];
-} ;
-
-static int do_query(char * query, int queryType, char ** domainName, struct in_addr * ipNum)
-{
-	int len, ancount, type;
-	u_char * data, * end;
-	char name[MAXDNAME];
-	union dns_response response;
-	
-#ifdef __sparc__
-	/* from jj: */
-	/* We have to wait till ethernet negotiation is done */
-	_res.retry = 3;
-#else
-	_res.retry = 2;
-#endif
-
-
-	len = res_search(query, C_IN, queryType, (void *) &response, sizeof(response));
-	if (len <= 0)
-		return -1;
-
-	if (ntohs(response.hdr.rcode) != NOERROR)
-		return -1;
-
-	ancount = ntohs(response.hdr.ancount);
-	if (ancount < 1)
-		return -1;
-	
-	data = response.buf + sizeof(HEADER);
-	end = response.buf + len;
-	
-	/* skip the question */
-	data += dn_skipname(data, end) + QFIXEDSZ;
-
-	/* parse the answer(s) */
-	while (--ancount >= 0 && data < end) {
-
-		/* skip the domain name portion of the RR record */
-		data += dn_skipname(data, end);
-
-		/* get RR information */
-		GETSHORT(type, data);
-		data += INT16SZ; /* skipp class */
-		data += INT32SZ; /* skipp TTL */
-		GETSHORT(len,  data);
-
-		if (type == T_PTR) {
-			/* we got a pointer */
-			len = dn_expand(response.buf, end, data, name, sizeof(name));
-			if (len <= 0) return -1;
-			if (queryType == T_PTR && domainName) {
-				/* we wanted a pointer */
-				*domainName = malloc(strlen(name) + 1);
-				strcpy(*domainName, name);
-				return 0;
-			}
-		} else if (type == T_A) {
-			/* we got an address */
-			if (queryType == T_A && ipNum) {
-				/* we wanted an address */
-				memcpy(ipNum, data, sizeof(*ipNum));
-				return 0;
-			}
-		}
-		
-		/* move ahead to next RR */
-		data += len;
-	} 
-	
-	return -1;
-}
-
-char * mygethostbyaddr(char * ipnum) {
-	int rc;
-	char * result;
-	char * strbuf;
-	char * chptr;
-	char * splits[4];
-	int i;
-
-	_res.retry = 1;
-	
-	strbuf = alloca(strlen(ipnum) + 1);
-	strcpy(strbuf, ipnum);
-	
-	ipnum = alloca(strlen(strbuf) + 20);
-	
-	for (i = 0; i < 4; i++) {
-		chptr = strbuf;
-		while (*chptr && *chptr != '.')
-			chptr++;
-		*chptr = '\0';
-		
-		if (chptr - strbuf > 3) return NULL;
-		splits[i] = strbuf;
-		strbuf = chptr + 1;
-	}
-	
-	sprintf(ipnum, "%s.%s.%s.%s.in-addr.arpa", splits[3], splits[2], splits[1], splits[0]);
-	
-	rc = do_query(ipnum, T_PTR, &result, NULL);
-	
-	if (rc) 
-		return NULL;
-	else
-		return result;
-}
-
-int mygethostbyname(char * name, struct in_addr * addr) {
-	int rc = do_query(name, T_A, NULL, addr);
-	if (!rc)
-		log_message("is-at %s", inet_ntoa(*addr));
-	return rc;
-}
-
-#else
-
-#error "Unsupported C library"
-
-#endif
diff --git a/mdk-stage1/dns.h b/mdk-stage1/dns.h
deleted file mode 100644
index 21d0c63ac..000000000
--- a/mdk-stage1/dns.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef H_DNS
-#define H_DNS 
-
-#include <netinet/in.h>
-
-int mygethostbyname(char * name, struct in_addr * addr);
-char * mygethostbyaddr(char * ipnum);
-
-#endif
diff --git a/mdk-stage1/doc/HACKING b/mdk-stage1/doc/HACKING
deleted file mode 100644
index d196c8010..000000000
--- a/mdk-stage1/doc/HACKING
+++ /dev/null
@@ -1,31 +0,0 @@
-If you have to boot pretty often, you'll appreciate to speed the things up
-a little.
-
-Here's what we use: the GRUB feature to boot from the network using the
-DHCP protocol and the TFTP protocol.
-
-Here's the "menu.lst" to do that:
-
--=-=--
-
-timeout 0
-
-title linux
-dhcp
-tftpserver 192.168.1.17
-kernel (nd)/tftpboot/gc/vmlinuz ramdisk=32000 vga=788
-initrd (nd)/tftpboot/gc/network.rdz
-
--=-=--
-
-
-The option "tftpserver" is used to override the tftpserver address given
-as an answer by the DHCP server. That way, you'll not need to bother your
-system administrator to modify his dhcp server configuration.
-
-The directory /tftpboot seems to be the only one defaultly accepted by the
-server, and its subdirs.
-
-
-Of course, your GRUB needs to be compiled with the specific code for your
-network card; use ./configure --help in the GRUB build dir for more infos.
diff --git a/mdk-stage1/doc/README b/mdk-stage1/doc/README
deleted file mode 100644
index 6a1d92bf9..000000000
--- a/mdk-stage1/doc/README
+++ /dev/null
@@ -1,185 +0,0 @@
--------------------------------------------------------
-*  Stage1 of the Mandrakelinux installation program  *
--------------------------------------------------------
-
-
-[ Author ]
-
-	Guillaume Cottenceau (gc at mandrakesoft.com)
-
-
-[ Copyright ]
-
-	Copyright 2000, 2001, 2002 Mandrakesoft
-
-	Partially inspired by Redhat stuff (install from 5.x and 7.x) copyright
-	Red Hat Software, and Debian stuff (boot-floppies) copyright by their
-	respective holders.
-
-
-[ Licence ]
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-	
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	GNU General Public License for more details.
-	
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, write to the Free Software
-	Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-
-
-	*** WARNING! ***
-
-	This General Public License does not permit incorporating any part
-	of this program as a library into proprietary programs.
-
-
-[ Online ]
-
-	http://people.mandrakesoft.com/~gc/html/stage1.html
-
-
-[ Purpose ]
-
-	This code will take the control of the computer after that Linux
-	kernel booted properly, and will try to run the main installer
-	(also known as "stage 2") from a series of different media
-	including harddrive, cdrom, and network.
-
-	Use the source, Luke.
-
-
-
-
-                -=-=-- Okay, now, more details --=-=-
-
-
-	[ Installing Mandrakelinux ]
-
-Per default, just insert your Mandrakelinux Installation CD into your
-CDROM tray, be sure your system BIOS is configured to boot on your CDROM,
-and that's all.
-
-If you have multiple CDROM drives and the installer can't autodetect in
-which CDROM drive is the disc, it may ask you to choose the correct drive,
-between your CDROM drives.
-
-Also, if you want to install from an SCSI CDROM, the installer should
-detect your SCSI adapter; if it fails you may have to select the right
-driver and/or supply additional parameters.
-
-
-        [ Position of the problem ]
-
-The need for alternate installation methods come with more specific
-hardware configuration and/or need for frequent updates of the Installer
-software.
-
-All of these methods will require to use a special boot disk. The method
-is to download it and then to copy it "physically" to a floppy with the
-command:
-
-# dd if=<boot-disk> of=/dev/fd0
-
-Our boot disks are called "cdrom.img", "network.img", etc.
-
-
-        [ Installation from CDROM ]
-
-The first situation you may encounter is an old BIOS which does not permit
-you to boot from your CDROM drive.
-
-In that case, you'll need to use the "cdrom.img" image file. The steps are
-the same as with CDROM boot, and everything should be automatic.
-
-
-        [ Installation from DISK ]
-
-If you like trying occasionnally our development version, the Cooker, one
-of the easiest way is to grab a local copy of the Distribution on one of
-your local hard drives, and to install from that location.
-
-At present time, you can install from IDE or SCSI drives, from Linux
-(ext2), Windows (vfat) or Reiserfs partition.
-
-In that case, you'll need to use the "hd.img" image file. The dialogs will
-ask you to choose the DISK drive to use to install from, then the
-partition on which you copied the Distribution, then the location
-(directory) in which you copied the Distribution.
-
-
-        [ Installation from NETWORK ]
-
-For convenience, you can also install from a NFS volume, from a FTP
-server, or from a HTTP server. NFS installs are maybe the fastest
-and most convenient possible, so if you need to do frequent and/or
-multiple installs, you may like this option.
-
-In that case, you'll need to use the "network.img" image file. If you have
-PCI network card(s), you'll probably have to only setup your network
-options. If not, you'll have to choose the appropriate driver(s) and/or
-optional parameters. Supported network configurations include static IP
-allocation and DHCP automatic configuration.
-
-
-        [ Installation from PCMCIA ]
-
-If you want to perform an installation on your laptop that is not based on
-local IDE CDROM or DISK, nor on built-in network card, but on PCMCIA
-extension (probably a network adapter or CDROM drive), you'll need the
-"pcmcia.img" image file.
-
-PCMCIA services should automatically start and be transparent to you.
-Then, you'll follow the instructions according to your preferred
-installation method.
-
-
-	[ Monitoring a stage1 session ]
-
-Linux supports virtual consoles. You can switch between them by issueing
-Ctrl+Alt+Fx key, in which 'x' is the number of the console. Here's console
-occupancy during stage1.
-
-(#1) The user-interface of the stage1 is on the first console. In case of
-newt interaction, it's provided with a neat blue and black color scheme,
-and nice widgets. In case of stdio interaction (cdrom and disk installs),
-it's more basic but still usable :-).
-
-(#2) A shell is provided on second console in some cases (you need to
-compile it with -DSPAWN_SHELL and you need to provide a valid shell in the
-initrd) and of course it's not in, in image files of Mandrakelinux
-releases because it's too much diskspace.
-
-(#3) The log is printed out on the third console. This is the location
-where you can find most valuable information, prefixed by a '*'. See
-"log.h" for calls that print things out to the log.
-
-(#4) The kernel messages are printed on the fourth console. There is a
-process forked very early in the init (the program before the stage1)
-which monitors /proc/kmsg for new kernel messages. Also, syslog stuff (the
-logs commited by the programs) should appear on the /dev/log Unix socket,
-this is also printed on this console.
-
-(#5) Former place for the stderr of insmod calls. It's not used anymore.
-
-(#6) Place where a trivial interactive communication with the stage1 is
-set up if the parameter -DSPAWN_INTERACTIVE is compiled in. Basically, you
-can set switches such as "expert" and "rescue" on the fly with this
-feature. It's implemented with a fork and a Unix pipe.
-
-
-        [ Rescueing a system ]
-
-Since Mandrakelinux 7.1, we provide a rescue system through each of the
-previously described methods. You don't need a special "rescue.img" file.
-Just hit "F1" at boot time, type in "rescue", and follow the first steps
-of the installation according to the method you chose (choose
-disks/partitions for disk method, network parameters for network method,
-etc). Then, you'll end up with a workable system, very useful to rescue a
-damaged system, or do other basic actions.
diff --git a/mdk-stage1/doc/TECH-INFOS b/mdk-stage1/doc/TECH-INFOS
deleted file mode 100644
index e66c9daa5..000000000
--- a/mdk-stage1/doc/TECH-INFOS
+++ /dev/null
@@ -1,101 +0,0 @@
-
-| (*) Automatic install
-\----------------------
-
-This feature is used to replace redhat kickstart. It uses the kernel
-parameter "automatic" with keywords separated with commas and colons, on
-the following genres:
-
-	automatic=method:nfs,network:static,ip:192.168.1.24,server:192.168.1.7,directory:/stable/i586
-
-	automatic=method:ftp,network:dhcp,server:ftp.ciril.fr,directory:/pub/linux/mandrake-devel/cooker
-
-	automatic=method:ftp,network:dhcp,server:companyserver,directory:/mdkinst,user:XXX,pass:XXX
-
-	automatic=method:ftp,interface:eth1,network:dhcp,...
-
-	automatic=method:ftp,network:adsl,adsluser:XXX,adslpass:XXX,...
-
-	automatic=method:cdrom
-
-	automatic=method:disk,disk:hdb,partition:hdb7,directory:/cooker
-
-
-The keywords correspond to each "virtual" question answered automatically,
-either from a list or from a free field.
-
-
-Keywords are:
-
-
-`method' <- (nfs,ftp,http,cdrom,disk)
-
-if nfs/ftp/http:
-
-    `network' <- (static,dhcp,adsl)
-
-    if multiple interfaces detected:
-
-        `interface' <- (list-of-detected-interfaces)
-
-    fi
-
-    if static:
-
-        `ip', `dns', `gateway', `netmask' (free fields)
-
-    elsif adsl:
-
-	`adsluser', `adslpass' (free field)
-
-    fi
-
-    if resolving fails:
-
-        `hostname', `domain' (free fields)
-
-    fi   
-
-    `server', `directory' (free fields)
-
-    if ftp:
-
-        `user', `pass' (free fields)
-
-    fi
-
-fi
-
-if disk:
-
-    `disk' <- (list-of-detected-disks)
-
-    `partition' <- (list-of-detected-partitions)
-
-    `directory' (free fields)
-
-fi
-
-
-
-You may use shorter versions of keywords (it helps reducing size of
-commandline), please find each keyword short-alias counterpart in file
-../automatic.c under the identifier named "short_aliases".
-
-This gives for example for:
-
-	automatic=method:nfs,network:static,ip:192.168.1.24,server:192.168.1.7,directory:/stable/i586
-==>
-	automatic=met:nfs,net:static,ip:192.168.1.24,ser:192.168.1.7,dir:/stable/i586
-
-
-
-You may specify a stage2 auto-install file, different from the
-default `auto_inst.cfg.pl' in install/, by filling the
-`bootfile' parameter of your DHCP server response.
-
-Note that if the name ends with `-IP' or `-IP.pl', IP will be
-replaced by the IP address given to the host, normalized to
-hexadecimal (that is, `192.168.100.57' would give 'C0A86439').
-
-
diff --git a/mdk-stage1/doc/UPDATEMODULES b/mdk-stage1/doc/UPDATEMODULES
deleted file mode 100644
index ceef21758..000000000
--- a/mdk-stage1/doc/UPDATEMODULES
+++ /dev/null
@@ -1,95 +0,0 @@
-This is the documentation for the "Update Modules" (Update Drivers)
-feature.
-
-This feature aims to propose new modules or replacement modules for the
-install and afterwards. This is useful when there is a firmware update for a
-given driver, an additional driver needed for something, etc.
-
-
-You must use a floppy disk with e2fs filesystem (NOT vfat/windows
-formatted). Use "mke2fs /dev/fd0" on your own box to format a floppy with
-e2fs filesystem.
-
-This disk may contain a number of kernel modules; some of them 
-may replace existing modules, some of them may be added.
-This disk must contain a special file, named "to_load", on
-the root (not in a subdirectory). This file will contain a series of
-module names, with optional module options; the program will try to load
-all these modules one after another, using file on the floppy if present,
-else using file within standard module repository ("marfile" on the boot
-floppy). It can contain comments, these are strictly defined by the
-presence of a hash (#) character on column 0 of any line.
-
-This disk may also contain some update or new modules for installed kernels. 
-Those modules must be placed in directory <kernel-version>. They must be
-gzipped if the installed kernel modules are gzipped.
-
-You may need to specify the "category" so that new modules are used correctly.
-For example, a scsi module should be put in category disk/scsi so that it is
-put in scsi_hostadapter and initrd.
-
-
-Here's a typical scenario:
-
-
-1. Boot the floppy (or cdrom) with the option "updatemodules"
-
-   (you may do that by pressing F1 then entering "linux updatemodules")
-
-
-2. At the very beginning of the User Interface, you are asked to insert
-   the Update Modules disk. Insert the Update Modules disk and press
-   Enter.
-
---=----=----=----=----=----=----=----=----=--
-Our example disk contains:
-
-[root@obiwan mnt]# ll floppy/
-total 77
-drwxr-xr-x    2 root     root        12288 Jul 26 12:02 lost+found/
--rw-r--r--    1 root     root         9051 Jul 26 12:43 msdos.ko
--rw-r--r--    1 root     root        13660 Jul 26 12:04 ppa.ko
--rw-r--r--    1 root     root           54 Jul 26 12:46 to_load
--rw-r--r--    1 root     root        32108 Jul 26 12:04 uhci.ko
--rw-r--r--    1 root     root         6572 Jul 26 12:04 wacom.ko
-drwxr-xr-x    4 root     root         4096 Jul 26 12:04 2.6.8.1-20mdk
-drwxr-xr-x    4 root     root         4096 Jul 26 12:04 2.6.8.1-20mdksmp
-[root@obiwan mnt]# cat floppy/to_load 
-# Update Drivers description file
-3c59x
-# fat is a dep for msdos
-fat
-# updated msdos (handling of 9+4 filenames)
-msdos
-ppa
-# ISA network card needing options
-ne io=0x300 irq=7
-# New module [list_modules: disk/scsi]
-a320raid
-[root@obiwan mnt]# (cd floppy/2.6.8.1-20mdk ; find -type f)
-./kernel/fs/msdos/msdos.ko.gz
-./kernel/drivers/scsi/ppa.ko.gz
-./kernel/drivers/usb/host/uhci-hcd.ko.gz
-./kernel/drivers/usb/input/wacom.ko.gz
-[root@obiwan mnt]# 
---=----=----=----=----=----=----=----=----=--
-
-
-3. The program reads the special file "to_load" and processes the files.
-
-	a- 3c59x   loaded from the marfile on the boot floppy
-	b- fat     loaded from the marfile on the boot floppy
-	c- msdos   loaded from the update modules floppy
-	d- ppa     loaded from the update modules floppy
-        e- ne      loaded from the marfile on the boot floppy
-
-
-
-!!! Beware !!!, the dependencies are not handled automatically in
-the case of load from the update modules floppy, that's why on
-our example we need to load "fat" from the standard modules
-before "msdos" from the update floppy.
-
-
-4. When system is installed, update floppy is asked again so that update
-modules for the installed kernels can be copied. Then depmod is called.
diff --git a/mdk-stage1/doc/WHY-DIETLIBC b/mdk-stage1/doc/WHY-DIETLIBC
deleted file mode 100644
index e7c526b49..000000000
--- a/mdk-stage1/doc/WHY-DIETLIBC
+++ /dev/null
@@ -1,50 +0,0 @@
-(the dietlibc is a replacement for the glibc, which aim is to produce
-smaller statically linked binaries)
-
-
-The use for dietlibc in the stage1 was clear because currently used
-install process on x86 is from a 1.44 Mbytes floppy. On this floppy we
-need to fit the kernel, modules (scsi and network access), and the code to
-do the basic things to load the stage2. The only part on which we could
-progress was the code.
-
-As always, figures demonstrate evidences. Here are the size of the
-binaries used for the cdrom, disk, network and full floppy installs, using
-newt as the UI library:
-
-	- with glibc
-
--rwxr-xr-x    1 gc       gc         569448 May 15 15:29 stage1-cdrom
--rwxr-xr-x    1 gc       gc         572264 May 15 15:29 stage1-disk
--rwxr-xr-x    1 gc       gc         624712 May 15 15:30 stage1-network
--rwxr-xr-x    1 gc       gc         720360 May 15 15:29 stage1-full
-
-	- with dietlibc
-
--rwxr-xr-x    1 gc       gc         169332 May 15 14:26 stage1-cdrom
--rwxr-xr-x    1 gc       gc         172180 May 15 14:26 stage1-disk
--rwxr-xr-x    1 gc       gc         198612 May 15 14:26 stage1-network
--rwxr-xr-x    1 gc       gc         251764 May 15 14:26 stage1-full
-
-
-The `stage1-full' binary has code for many things, most notably: data
-decrunching (bzlib), archive extraction (in-house format), module loading
-(insmod from busybox), PCI detection, ide and scsi handling,
-cdrom/disk/loopback mounting, DHCP client negociation (redhat+grub), NFS
-mounting (util-linux), FTP and HTTP transmission (redhat), pcmcia
-initializing (pcmcia-cs), UI interaction (slang/newt); with use of the
-dietlibc, the binary is only 250 kbytes!
-
-
-Due to the modular coding, it is also possible to choose to not use
-slang/newt as the UI, but a stdio-only UI. In that case, the binaries get
-even smaller:
-
--rwxr-xr-x    1 gc       gc         104500 May 15 15:46 stage1-cdrom*
--rwxr-xr-x    1 gc       gc         107348 May 15 15:46 stage1-disk*
--rwxr-xr-x    1 gc       gc         133972 May 15 15:47 stage1-network*
--rwxr-xr-x    1 gc       gc         187348 May 15 15:46 stage1-full*
-
-
-
-gc [Tue May 15 15:58:34 2001]
\ No newline at end of file
diff --git a/mdk-stage1/doc/documented..frontend.h b/mdk-stage1/doc/documented..frontend.h
deleted file mode 100644
index 0e666d534..000000000
--- a/mdk-stage1/doc/documented..frontend.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Using high-level UI.
- *
- * These functions are frontend-independant: your program won't know each
- * `frontend' (e.g. each way to grab user input) will be used.
- *
- * Then you may link your binary against any `frontend' that implement all
- * these functions (and possibly necessary libraries).
- */
-
-
-#ifndef _FRONTEND_H_
-#define _FRONTEND_H_
-
-/* this must be called before anything else */
-void init_frontend(void);
-
-/* this must be called before exit of program */
-void finish_frontend(void);
-
-
-void info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* (blocks program) */
-
-void error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* (blocks program) */
-
-/* (doesn't block program) 
- * (this is not necessarily stackable, e.g. only one wait_message at a time) */
-void wait_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-
-/* call this to finish the wait on wait_message */
-void remove_wait_message(void);
-
-/* monitor progression of something (downloading a file, etc)
- * if size of progression is unknown, use `0' */
-void init_progression(char *msg, int size);
-void update_progression(int current_size);
-void end_progression(void);
-
-enum frontend_return { RETURN_OK, RETURN_BACK, RETURN_ERROR };
-
-/* Yes == RETURN_OK    No == RETURN_ERROR    Back == RETURN_BACK */
-enum frontend_return ask_yes_no(char *msg);
-
-/* [elems] NULL terminated array of char*
- * [choice] address of a (unitialized) char* */
-enum frontend_return ask_from_list(char *msg, char ** elems, char ** choice);
-
-enum frontend_return ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice);
-
-/* [questions] NULL terminated array of char*
- * [answers] address of a (unitialized) char**, will contain a non-NULL terminated array of char*
- * [callback_func] function called at most when the answers change; it can examine the array of char* and assign some new char* */
-enum frontend_return ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings));
-
-#endif
diff --git a/mdk-stage1/frontend-common.c b/mdk-stage1/frontend-common.c
deleted file mode 100644
index a66db457a..000000000
--- a/mdk-stage1/frontend-common.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include <probing.h>
-
-#include "frontend.h"
-
-
-void info_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	vinfo_message(msg, args);
-	va_end(args);
-}
-
-void wait_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	vwait_message(msg, args);
-	va_end(args);
-}
-
-void error_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	verror_message(msg, args);
-	va_end(args);
-}
diff --git a/mdk-stage1/frontend.h b/mdk-stage1/frontend.h
deleted file mode 100644
index 1737ee7e7..000000000
--- a/mdk-stage1/frontend.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * For doc please read doc/documented..frontend.h
- */
-
-#ifndef _FRONTEND_H_
-#define _FRONTEND_H_
-
-#include <stdarg.h>
-
-/* 'unused' atttribute, gcc specific and just to turn down some warnings.  */
-#if defined __GNUC__
-#define UNUSED __attribute__((unused))
-#else
-#define UNUSED
-#endif
-
-enum return_type { RETURN_OK, RETURN_BACK, RETURN_ERROR };
-
-void init_frontend(char * welcome_msg);
-void finish_frontend(void);
-
-void error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* blocking */
-void info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* blocking */
-void wait_message(char *msg, ...) __attribute__ ((format (printf, 1, 2))); /* non-blocking */
-void remove_wait_message(void);
-
-void init_progression_raw(char *msg, int size);
-void update_progression_raw(int current_size);
-void end_progression_raw(void);
-
-#ifdef ENABLE_BOOTSPLASH
-void init_progression(char *msg, int size);
-void update_progression(int current_size);
-void end_progression(void);
-#else
-#define init_progression init_progression_raw
-#define update_progression update_progression_raw
-#define end_progression end_progression_raw
-#endif
-
-enum return_type ask_yes_no(char *msg);
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice);
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice);
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings));
-
-void suspend_to_console(void);
-void resume_from_suspend(void);
-
-void verror_message(char *msg, va_list ap);
-void vinfo_message(char *msg, va_list ap);
-void vwait_message(char *msg, va_list ap);
-
-#endif
diff --git a/mdk-stage1/init-libc-headers.h b/mdk-stage1/init-libc-headers.h
deleted file mode 100644
index 55d6f10b3..000000000
--- a/mdk-stage1/init-libc-headers.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/mount.h>
-#include <linux/un.h>
-#include <errno.h>
-#include <signal.h>
-#include <sys/resource.h>
-#include <sys/wait.h>
-#include <linux/unistd.h>
-#include <sys/select.h>
-#include <sys/ioctl.h>
-
-#ifndef SOCK_STREAM
-#define SOCK_STREAM 1
-#endif
-
-static inline _syscall3(int, syslog, int, type, char *, bufp, int, len);
-static inline _syscall3(int, reboot, int, magic, int, magic2, int, flag);
diff --git a/mdk-stage1/init.c b/mdk-stage1/init.c
deleted file mode 100644
index f5a46010b..000000000
--- a/mdk-stage1/init.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef INIT_HEADERS
-#include "init-libc-headers.h"
-#else
-#include INIT_HEADERS
-#endif
-
-#include "config-stage1.h"
-#include <linux/cdrom.h>
-
-#if defined(__powerpc__)
-#define TIOCSCTTY     0x540E
-#endif
-
-char * env[] = {
-	"PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sbin:/mnt/usr/sbin:/mnt/bin:/mnt/usr/bin",
-	"LD_LIBRARY_PATH=/lib:/usr/lib:/mnt/lib:/mnt/usr/lib:/usr/X11R6/lib:/mnt/usr/X11R6/lib"
-#if defined(__x86_64__) || defined(__ppc64__)
-	":/lib64:/usr/lib64:/usr/X11R6/lib64:/mnt/lib64:/mnt/usr/lib64:/mnt/usr/X11R6/lib64"
-#endif
-	,
-	"HOME=/",
-	"TERM=linux",
-	"TERMINFO=/etc/terminfo",
-	NULL
-};
-
-
-/* 
- * this needs to handle the following cases:
- *
- *	1) run from a CD root filesystem
- *	2) run from a read only nfs rooted filesystem
- *      3) run from a floppy
- *	4) run from a floppy that's been loaded into a ramdisk 
- *
- */
-
-int testing = 0;
-int klog_pid;
-
-
-void fatal_error(char *msg)
-{
-	printf("FATAL ERROR IN INIT: %s\n\nI can't recover from this, please reboot manually and send bugreport.\n", msg);
-        select(0, NULL, NULL, NULL, NULL);
-}
-
-void print_error(char *msg)
-{
-	printf("E: %s\n", msg);
-}
-
-void print_warning(char *msg)
-{
-	printf("W: %s\n", msg);
-}
-
-void print_int_init(int fd, int i)
-{
-	char buf[10];
-	char * chptr = buf + 9;
-	int j = 0;
-	
-	if (i < 0)
-	{
-		write(1, "-", 1);
-		i = -1 * i;
-	}
-	
-	while (i)
-	{
-		*chptr-- = '0' + (i % 10);
-		j++;
-		i = i / 10;
-	}
-	
-	write(fd, chptr + 1, j);
-}
-
-void print_str_init(int fd, char * string)
-{
-	write(fd, string, strlen(string));
-}
-
-/* fork to:
- *   (1) watch /proc/kmsg and copy the stuff to /dev/tty4
- *   (2) listens to /dev/log and copy also this stuff (log from programs)
- */
-void doklog()
-{
-	fd_set readset, unixs;
-	int in, out, i;
-	int log;
-	int s;
-	int sock = -1;
-	struct sockaddr_un sockaddr;
-	char buf[1024];
-	int readfd;
-
-	/* open kernel message logger */
-	in = open("/proc/kmsg", O_RDONLY,0);
-	if (in < 0) {
-		print_error("could not open /proc/kmsg");
-		return;
-	}
-
-        mkdir("/tmp", 0755);
-	if ((log = open("/tmp/syslog", O_WRONLY | O_CREAT | O_APPEND, 0644)) < 0) {
-		print_error("error opening /tmp/syslog");
-		sleep(5);
-		return;
-	}
-
-	if ((klog_pid = fork())) {
-		close(in);
-		close(log);
-		return;
-	} else {
-		close(0); 
-		close(1);
-		close(2);
-	}
-	
-	out = open("/dev/tty4", O_WRONLY, 0);
-	if (out < 0) 
-		print_warning("couldn't open tty for syslog -- still using /tmp/syslog\n");
-
-	/* now open the syslog socket */
-// ############# LINUX 2.4 /dev/log IS BUGGED! --> apparently the syslogs can't reach me, and it's full up after a while
-//	  sockaddr.sun_family = AF_UNIX;
-//	  strncpy(sockaddr.sun_path, "/dev/log", UNIX_PATH_MAX);
-//	  sock = socket(AF_UNIX, SOCK_STREAM, 0);
-//	  if (sock < 0) {
-//		  printf("error creating socket: %d\n", errno);
-//		  sleep(5);
-//	  }
-//
-//	  print_str_init(log, "] got socket\n");
-//	  if (bind(sock, (struct sockaddr *) &sockaddr, sizeof(sockaddr.sun_family) + strlen(sockaddr.sun_path)))	{
-//		  print_str_init(log, "] bind error: ");
-//		  print_int_init(log, errno);
-//		  print_str_init(log, "\n");
-//		  sleep(//	  }
-//
-//	  print_str_init(log, "] bound socket\n");
-//	  chmod("/dev/log", 0666);
-//	  if (listen(sock, 5)) {
-//		  print_str_init(log, "] listen error: ");
-//		  print_int_init(log, errno);
-//		  print_str_init(log, "\n");
-//		  sleep(5);
-//	  }
-
-	/* disable on-console syslog output */
-	syslog(8, NULL, 1);
-
-	print_str_init(log, "] kernel/system logger ok\n");
-	FD_ZERO(&unixs);
-	while (1) {
-		memcpy(&readset, &unixs, sizeof(unixs));
-
-		if (sock >= 0)
-			FD_SET(sock, &readset);
-		FD_SET(in, &readset);
-		
-		i = select(20, &readset, NULL, NULL, NULL);
-		if (i <= 0)
-			continue;
-
-		/* has /proc/kmsg things to tell us? */
-		if (FD_ISSET(in, &readset)) {
-			i = read(in, buf, sizeof(buf));
-			if (i > 0) {
-				if (out >= 0)
-					write(out, buf, i);
-				write(log, buf, i);
-			}
-		} 
-
-		/* examine some fd's in the hope to find some syslog outputs from programs */
-		for (readfd = 0; readfd < 20; ++readfd) {
-			if (FD_ISSET(readfd, &readset) && FD_ISSET(readfd, &unixs)) {
-				i = read(readfd, buf, sizeof(buf));
-				if (i > 0) {
-					/* grep out the output of RPM telling that it installed/removed some packages */
-					if (!strstr(buf, "mdk installed") && !strstr(buf, "mdk removed")) {
-						if (out >= 0)
-							write(out, buf, i);
-						write(log, buf, i);
-					}
-				} else if (i == 0) {
-					/* socket closed */
-					close(readfd);
-					FD_CLR(readfd, &unixs);
-				}
-			}
-		}
-
-		/* the socket has moved, new stuff to do */
-		if (sock >= 0 && FD_ISSET(sock, &readset)) {
-			s = sizeof(sockaddr);
-			readfd = accept(sock, (struct sockaddr *) &sockaddr, &s);
-			if (readfd < 0) {
-				char * msg_error = "] error in accept\n";
-				if (out >= 0)
-					write(out, msg_error, strlen(msg_error));
-				write(log, msg_error, strlen(msg_error));
-				close(sock);
-				sock = -1;
-			}
-			else
-				FD_SET(readfd, &unixs);
-		}
-	}
-}
-
-
-#define LOOP_CLR_FD	0x4C01
-
-void del_loops(void) 
-{
-        char loopdev[] = "/dev/loop0";
-        char chloopdev[] = "/dev/chloop0";
-        int i;
-        for (i=0; i<8; i++) {
-                int fd;
-                loopdev[9] = '0' + i;
-                fd = open(loopdev, O_RDONLY, 0);
-                if (fd > 0) {
-                        if (!ioctl(fd, LOOP_CLR_FD, 0))
-                                printf("\t%s\n", loopdev);
-                        close(fd);
-                }
-                chloopdev[11] = '0' + i;
-                fd = open(chloopdev, O_RDONLY, 0);
-                if (fd > 0) {
-                        if (!ioctl(fd, LOOP_CLR_FD, 0))
-                                printf("\t%s\n", chloopdev);
-                        close(fd);
-                }
-        }
-}
-
-struct filesystem
-{
-	char * dev;
-	char * name;
-	char * fs;
-	int mounted;
-};
-
-char* strcat(register char* s,register const char* t)
-{
-  char *dest=s;
-  s+=strlen(s);
-  for (;;) {
-    if (!(*s = *t)) break; ++s; ++t;
-  }
-  return dest;
-}
-
-/* attempt to unmount all filesystems in /proc/mounts */
-void unmount_filesystems(void)
-{
-	int fd, size;
-	char buf[65535];			/* this should be big enough */
-	char *p;
-	struct filesystem fs[500];
-	int numfs = 0;
-	int i, nb;
-	int disallow_eject = 0;
-
-	printf("unmounting filesystems...\n"); 
-	
-	fd = open("/proc/mounts", O_RDONLY, 0);
-	if (fd < 1) {
-		print_error("failed to open /proc/mounts");
-		sleep(2);
-		return;
-	}
-
-	size = read(fd, buf, sizeof(buf) - 1);
-	buf[size] = '\0';
-
-	close(fd);
-
-	p = buf;
-	while (*p) {
-		fs[numfs].mounted = 1;
-		fs[numfs].dev = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		fs[numfs].name = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		fs[numfs].fs = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		while (*p != '\n') p++;
-		p++;
-                if (!strcmp(fs[numfs].fs, "nfs"))
-                        disallow_eject = 1;
-		if (strcmp(fs[numfs].name, "/")
-                    && !strstr(fs[numfs].dev, "ram")
-                    && strcmp(fs[numfs].name, "/dev")
-                    && strcmp(fs[numfs].name, "/sys")
-                    && strncmp(fs[numfs].name, "/proc", 5))
-                        numfs++;
-	}
-
-	/* Pixel's ultra-optimized sorting algorithm:
-	   multiple passes trying to umount everything until nothing moves
-	   anymore (a.k.a holy shotgun method) */
-	do {
-		nb = 0;
-		for (i = 0; i < numfs; i++) {
-			/*printf("trying with %s\n", fs[i].name);*/
-                        del_loops();
-			if (fs[i].mounted && umount(fs[i].name) == 0) { 
-				printf("\t%s\n", fs[i].name);
-				fs[i].mounted = 0;
-				nb++;
-			}
-		}
-	} while (nb);
-	
-	for (i = nb = 0; i < numfs; i++)
-		if (fs[i].mounted) {
-#ifdef MANDRAKE_MOVE
-                        if (!strcmp(fs[i].name, "/cdrom") || !strcmp(fs[i].name, "/image_always"))
-                                continue;
-#endif
-			printf("\tumount failed: %s\n", fs[i].name);
-			if (strcmp(fs[i].fs, "ext3") == 0) nb++; /* don't count not-ext3 umount failed */
-		}
-
-#ifdef MANDRAKE_MOVE
-        if (!disallow_eject) {
-                fd = open("/proc/fs/supermount/subfs", O_RDONLY, 0);
-                if (fd > 0) {
-                        char devices[100][100];
-                        int i = 0;
-                        char * ptr1, * ptr2;
-                        size = read(fd, buf, sizeof(buf) - 1);
-                        buf[size] = '\0';
-                        close(fd);
-                        ptr1 = buf;
-                        ptr2 = buf;
-                        while (*ptr1 && *ptr2) {
-                                char * ptrf = ptr1;
-                                while (*ptr2 && *ptr2 != '\n')
-                                        ptr2++;
-                                while (*ptrf && *ptrf != ' ')
-                                        ptrf++;
-                                if (*ptrf)
-                                        *ptrf = '\0';
-                                strcpy(devices[i], ptr1);
-                                i++;
-                                if (*ptr2)
-                                        ptr2++;
-                                ptr1 = ptr2;
-                        }
-                        while (i >= 1) {
-                                i--;
-                                strcat(devices[i], " release force");
-                                fd = open("/proc/fs/supermount/subfs", O_WRONLY, 0);
-                                write(fd, devices[i], strlen(devices[i]));
-                                close(fd);
-                        }
-                }
-                fd = open("/dev/cdrom", O_RDONLY|O_NONBLOCK, 0);
-                if (fd > 0) {
-                        ioctl(fd, CDROM_LOCKDOOR, 0);
-                        close(fd);
-                }
-                fd = open("/dev/cdrom", O_RDONLY|O_NONBLOCK, 0);
-                if (fd > 0) {
-                        ioctl(fd, CDROMEJECT, 0);
-                        close(fd);
-                }
-        }
-#endif
-	
-	if (nb) {
-		printf("failed to umount some filesystems\n");
-                select(0, NULL, NULL, NULL, NULL);
-	}
-}
-
-#define BMAGIC_HARD	0x89ABCDEF
-#define BMAGIC_SOFT	0
-#define BMAGIC_REBOOT	0x01234567
-#define BMAGIC_HALT	0xCDEF0123
-#define BMAGIC_POWEROFF	0x4321FEDC
-int reboot_magic = BMAGIC_REBOOT;
-
-int in_reboot(void)
-{
-        int fd;
-        if ((fd = open("/var/run/rebootctl", O_RDONLY, 0)) > 0) {
-                char buf[100];
-                int i = read(fd, buf, sizeof(buf));
-                close(fd);
-                if (strstr(buf, "halt"))
-                        reboot_magic = BMAGIC_POWEROFF;
-                return i > 0;
-        }
-        return 0;
-}
-
-int exit_value_proceed = 66;
-int exit_value_restart = 0x35;
-
-int main(int argc, char **argv)
-{
-	pid_t installpid, childpid;
-	int wait_status;
-	int fd;
-	int abnormal_termination = 0;
-
-        if (argc > 1 && argv[1][0] >= '0' && argv[1][0] <= '9') {
-                printf("This is no normal init, sorry.\n"
-                       "Call `reboot' or `halt' directly.\n");
-                return 0;
-        }
-
-	if (!testing) {
-		/* turn off screen blanking */
-		printf("\033[9;0]");
-		printf("\033[8]");
-	}
-	else
-		printf("*** TESTING MODE *** (pid is %d)\n", getpid());
-
-
-	if (!testing) {
-                mkdir("/proc", 0755);
-		if (mount("/proc", "/proc", "proc", 0, NULL))
-			fatal_error("Unable to mount proc filesystem");
-	}
-	
-
-	/* ignore Control-C and keyboard stop signals */
-	signal(SIGINT, SIG_IGN);
-	signal(SIGTSTP, SIG_IGN);
-
-#ifdef MANDRAKE_MOVE
-        /* disallow Ctrl Alt Del to reboot */
-        reboot(0xfee1dead, 672274793, BMAGIC_SOFT);
-#endif
-
-	if (!testing) {
-		fd = open("/dev/console", O_RDWR, 0);
-		if (fd < 0)
-			fatal_error("failed to open /dev/console");
-		
-		dup2(fd, 0);
-		dup2(fd, 1);
-		dup2(fd, 2);
-		close(fd);
-	}
-		
-
-	/* I set me up as session leader (probably not necessary?) */
-	setsid();
-//	if (ioctl(0, TIOCSCTTY, NULL))
-//		print_error("could not set new controlling tty");
-
-	if (!testing) {
-		char my_hostname[] = "localhost";
-		sethostname(my_hostname, sizeof(my_hostname));
-		/* the default domainname (as of 2.0.35) is "(none)", which confuses 
-		   glibc */
-		setdomainname("", 0);
-	}
-
-	if (!testing) 
-		doklog();
-
-	/* Go into normal init mode - keep going, and then do a orderly shutdown
-	   when:
-	   
-	   1) install exits
-	   2) we receive a SIGHUP 
-	*/
-
-        do {
-                if (!(installpid = fork())) {
-                        /* child */
-                        char * child_argv[2];
-                        child_argv[0] = BINARY;
-                        child_argv[1] = NULL;
-
-                        execve(child_argv[0], child_argv, env);
-                        printf("error in exec of %s :-( [%d]\n", BINARY, errno);
-                        return 0;
-                }
-
-                do {
-                        childpid = wait4(-1, &wait_status, 0, NULL);
-                } while (childpid != installpid);
-        } while (WIFEXITED(wait_status) && WEXITSTATUS(wait_status) == exit_value_restart);
-
-        /* allow Ctrl Alt Del to reboot */
-        reboot(0xfee1dead, 672274793, BMAGIC_HARD);
-
-        if (in_reboot()) {
-                // any exitcode is valid if we're in_reboot
-	} else if (WIFEXITED(wait_status) && WEXITSTATUS(wait_status) == exit_value_proceed) {
-		kill(klog_pid, 9);
-		printf("proceeding, please wait...\n");
-		return 0;
-        } else if (!WIFEXITED(wait_status) || WEXITSTATUS(wait_status) != 0) {
-		printf("exited abnormally :-( ");
-		if (WIFSIGNALED(wait_status))
-			printf("-- received signal %d", WTERMSIG(wait_status));
-		printf("\n");
-	  	abnormal_termination = 1;
-        }
-
-        if (!abnormal_termination) {
-                int i;
-                for (i=0; i<50; i++)
-                        printf("\n");  /* cleanup startkde messages */
-        }
-
-	if (testing)
-		return 0;
-
-	sync(); sync();
-	sleep(2);
-
-	printf("sending termination signals...");
-	kill(-1, 15);
-	sleep(2);
-	printf("done\n");
-
-	printf("sending kill signals...");
-	kill(-1, 9);
-	sleep(2);
-	printf("done\n");
-
-	unmount_filesystems();
-
-	sync(); sync();
-
-	if (!abnormal_termination) {
-                if (reboot_magic == BMAGIC_REBOOT) {
-#ifdef DEBUG
-                        printf("automatic reboot in 10 seconds\n");
-                        sleep(10);
-#endif
-                        reboot(0xfee1dead, 672274793, reboot_magic);
-                } else {
-                        printf("you may safely poweroff your computer now\n");
-                }
-	} else {
-		printf("you may safely reboot or halt your system\n");
-	}
-
-        select(0, NULL, NULL, NULL, NULL);
-	return 0;
-}
diff --git a/mdk-stage1/insmod-busybox/.cvsignore b/mdk-stage1/insmod-busybox/.cvsignore
deleted file mode 100644
index 26a2c08c9..000000000
--- a/mdk-stage1/insmod-busybox/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-insmod
-insmod-DIET
diff --git a/mdk-stage1/insmod-busybox/Config.h b/mdk-stage1/insmod-busybox/Config.h
deleted file mode 100644
index f02ac0253..000000000
--- a/mdk-stage1/insmod-busybox/Config.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* vi: set sw=4 ts=4: */
-// This file defines the feature set to be compiled into busybox.
-// When you turn things off here, they won't be compiled in at all.
-//
-//// This file is parsed by sed. You MUST use single line comments.
-//   i.e.  //#define BB_BLAH
-//
-//
-// BusyBox Applications
-#define BB_INSMOD
-// End of Applications List
-//
-//
-//
-// ---------------------------------------------------------
-// This is where feature definitions go.  Generally speaking,
-// turning this stuff off makes things a bit smaller (and less 
-// pretty/useful).
-//
-//
-//
-// Turn this on to use Erik's very cool devps, and devmtab kernel drivers,
-// thereby eliminating the need for the /proc filesystem and thereby saving
-// lots and lots memory for more important things.  You can not use this and
-// USE_PROCFS at the same time...  NOTE:  If you enable this feature, you
-// _must_ have patched the kernel to include the devps patch that is included
-// in the busybox/kernel-patches directory.  You will also need to create some
-// device special files in /dev on your embedded system:
-//        mknod /dev/mtab c 10 22
-//        mknod /dev/ps c 10 21
-// I emailed Linus and this patch will not be going into the stock kernel.
-//#define BB_FEATURE_USE_DEVPS_PATCH
-//
-// enable features that use the /proc filesystem (apps that 
-// break without this will tell you on compile)...
-// You can't use this and BB_FEATURE_USE_DEVPS_PATCH 
-// at the same time...
-#define BB_FEATURE_USE_PROCFS
-
-//
-// Enable tab completion in the shell (not yet 
-// working very well -- so don't turn this on)
-//#define BB_FEATURE_SH_TAB_COMPLETION
-//
-//Turn on extra fbset options
-//#define BB_FEATURE_FBSET_FANCY
-//
-//Turn on fbset readmode support
-//#define BB_FEATURE_FBSET_READMODE
-//
-// You must enable one or both of these features
-// Support insmod/lsmod/rmmod for post 2.1 kernels
-#define BB_FEATURE_NEW_MODULE_INTERFACE
-//
-// Support insmod/lsmod/rmmod for pre 2.1 kernels
-//#define BB_FEATURE_OLD_MODULE_INTERFACE
-//
-// Support module version checking
-//#define BB_FEATURE_INSMOD_VERSION_CHECKING
-//
-// Support for Minix filesystem, version 2
-//#define BB_FEATURE_MINIX2
-//
-//
-// Enable busybox --install [-s]
-// to create links (or symlinks) for all the commands that are 
-// compiled into the binary.  (needs /proc filesystem)
-// #define BB_FEATURE_INSTALLER
-//
-// Clean up all memory before exiting -- usually not needed
-// as the OS can clean up...  Don't enable this unless you
-// have a really good reason for cleaning things up manually.
-//#define BB_FEATURE_CLEAN_UP
-//
-// End of Features List
-//
-//
-//
-//
-//
-//
-//---------------------------------------------------
-// Nothing beyond this point should ever be touched by 
-// mere mortals so leave this stuff alone.
-//
-#ifdef BB_FEATURE_MOUNT_MTAB_SUPPORT
-#define BB_MTAB
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING && defined BB_SH
-#define BB_CMDEDIT
-#endif
-//
-#ifdef BB_KILLALL
-#ifndef BB_KILL
-#define BB_KILL
-#endif
-#endif
-//
-#ifdef BB_FEATURE_LINUXRC
-#ifndef BB_INIT
-#define BB_INIT
-#endif
-#define BB_LINUXRC
-#endif
-//
-#ifdef BB_GZIP
-#ifndef BB_GUNZIP
-#define BB_GUNZIP
-#endif
-#endif
-//
-#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT
-#define BB_NFSMOUNT
-#endif
-//
-#if defined BB_FEATURE_SH_COMMAND_EDITING
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_FEATURE_AUTOWIDTH
-#ifndef BB_FEATURE_USE_TERMIOS
-#define BB_FEATURE_USE_TERMIOS
-#endif
-#endif
-//
-#if defined BB_INSMOD
-#if ! defined BB_FEATURE_NEW_MODULE_INTERFACE && ! defined BB_FEATURE_OLD_MODULE_INTERFACE
-#define BB_FEATURE_NEW_MODULE_INTERFACE
-#endif
-#endif
diff --git a/mdk-stage1/insmod-busybox/Makefile b/mdk-stage1/insmod-busybox/Makefile
deleted file mode 100644
index 236874f96..000000000
--- a/mdk-stage1/insmod-busybox/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
- #******************************************************************************
- #
- #    insmod from busybox (i386 only)
- #
- # $Id$
- #
- # Copyright (C) 1999,2000 by Lineo, inc.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-all: insmod libinsmod.a
-
-clean:
-	rm -f *.o insmod libinsmod.a
-
-
-FLAGS = -c -Wall -Os -fomit-frame-pointer -D_GNU_SOURCE -DBB_VER='"0.60.5"' -DBB_BT='"2003.04.16-15:25+0000"'
-
-
-insmod: insmod-frontend.o insmod.o utility-standalone.o
-	$(DIET) gcc -o $@ $^
-	$(STRIPCMD) $@
-
-libinsmod.a: insmod.o utility.o
-	ar cru $@ $^
-	ranlib $@
-
-insmod-frontend.o: insmod-frontend.c busybox.h
-	$(DIET) gcc $(FLAGS) $(INCLUDES) insmod-frontend.c
-
-utility.o: utility.c busybox.h
-	$(DIET) gcc $(FLAGS) $(INCLUDES) utility.c
-
-utility-standalone.o: utility.c busybox.h
-	$(DIET) gcc $(FLAGS) $(INCLUDES) -o $@ -D_STANDALONE_ utility.c
-
-insmod.o: insmod.c busybox.h
-	$(DIET) gcc $(FLAGS) $(INCLUDES) insmod.c
diff --git a/mdk-stage1/insmod-busybox/README b/mdk-stage1/insmod-busybox/README
deleted file mode 100644
index 0ae697e92..000000000
--- a/mdk-stage1/insmod-busybox/README
+++ /dev/null
@@ -1,8 +0,0 @@
-This insmod code comes from busybox-0.60.5
-
-<http://www.busybox.net/>
-
-Suported architectures: x86, x86-64, ppc, arm, sh3, sh4, m68k, mips.
-
-
-gb
diff --git a/mdk-stage1/insmod-busybox/busybox.h b/mdk-stage1/insmod-busybox/busybox.h
deleted file mode 100644
index 9e6052fce..000000000
--- a/mdk-stage1/insmod-busybox/busybox.h
+++ /dev/null
@@ -1,477 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Busybox main internal header file
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Based in part on code from sash, Copyright (c) 1999 by David I. Bell 
- * Permission has been granted to redistribute this code under the GPL.
- *
- */
-#ifndef	_BB_INTERNAL_H_
-#define	_BB_INTERNAL_H_    1
-
-#include "Config.h"
-
-#ifdef DMALLOC
-#include "dmalloc.h"
-#endif
-
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <unistd.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/param.h>
-/* for the _syscall() macros */
-#include <sys/syscall.h>
-#include <linux/unistd.h>
-#include <linux/kernel.h>
-
-/* Some useful definitions */
-#define FALSE   ((int) 1)
-#define TRUE    ((int) 0)
-
-/* for mtab.c */
-#define MTAB_GETMOUNTPT '1'
-#define MTAB_GETDEVICE  '2'
-
-#define BUF_SIZE        8192
-#define EXPAND_ALLOC    1024
-
-
-#define isBlank(ch)     (((ch) == ' ') || ((ch) == '\t'))
-#define isDecimal(ch)   (((ch) >= '0') && ((ch) <= '9'))
-#define isOctal(ch)     (((ch) >= '0') && ((ch) <= '7'))
-#define isWildCard(ch)  (((ch) == '*') || ((ch) == '?') || ((ch) == '['))
-
-/* Macros for min/max.  */
-#ifndef MIN
-#define	MIN(a,b) (((a)<(b))?(a):(b))
-#endif
-
-#ifndef MAX
-#define	MAX(a,b) (((a)>(b))?(a):(b))
-#endif
-
-
-/* I don't like nested includes, but the string and io functions are used
- * too often
- */
-#include <stdio.h>
-#if !defined(NO_STRING_H) || defined(STDC_HEADERS)
-#  include <string.h>
-#  if !defined(STDC_HEADERS) && !defined(NO_MEMORY_H) && !defined(__GNUC__)
-#    include <memory.h>
-#  endif
-#  define memzero(s, n)     memset ((void *)(s), 0, (n))
-#else
-#  include <strings.h>
-#  define strchr            index
-#  define strrchr           rindex
-#  define memcpy(d, s, n)   bcopy((s), (d), (n))
-#  define memcmp(s1, s2, n) bcmp((s1), (s2), (n))
-#  define memzero(s, n)     bzero((s), (n))
-#endif
-
-
-enum Location {
-	_BB_DIR_ROOT = 0,
-	_BB_DIR_BIN,
-	_BB_DIR_SBIN,
-	_BB_DIR_USR_BIN,
-	_BB_DIR_USR_SBIN
-};
-
-struct BB_applet {
-	const	char*	name;
-	int	(*main)(int argc, char** argv);
-	enum	Location	location;
-	const	char*	usage;
-};
-/* From busybox.c */
-extern const struct BB_applet applets[];
-
-extern int ar_main(int argc, char **argv);
-extern int basename_main(int argc, char **argv);
-extern int bogomips_main(int argc, char **argv);
-extern int busybox_main(int argc, char** argv);
-extern int cat_main(int argc, char** argv);
-extern int chmod_chown_chgrp_main(int argc, char** argv);
-extern int chroot_main(int argc, char** argv);
-extern int chvt_main(int argc, char** argv);
-extern int clear_main(int argc, char** argv);
-extern int cp_mv_main(int argc, char** argv);
-extern int cut_main(int argc, char** argv);
-extern int date_main(int argc, char** argv);
-extern int dc_main(int argc, char** argv);
-extern int dd_main(int argc, char** argv);
-extern int dirname_main(int argc, char** argv);
-extern int deallocvt_main(int argc, char** argv);
-extern int df_main(int argc, char** argv);
-extern int dmesg_main(int argc, char** argv);
-extern int dos2unix_main(int argc, char** argv);
-extern int du_main(int argc, char** argv);
-extern int dumpkmap_main(int argc, char** argv);
-extern int dutmp_main(int argc, char** argv);
-extern int echo_main(int argc, char** argv);
-extern int expr_main(int argc, char** argv);
-extern int false_main(int argc, char** argv);
-extern int fbset_main(int argc, char** argv);
-extern int fdisk_main(int argc, char** argv);
-extern int fdflush_main(int argc, char **argv);
-extern int fsck_minix_main(int argc, char **argv);
-extern int find_main(int argc, char** argv);
-extern int free_main(int argc, char** argv);
-extern int freeramdisk_main(int argc, char** argv);
-extern int getopt_main(int argc, char** argv);
-extern int grep_main(int argc, char** argv);
-extern int gunzip_main (int argc, char** argv);
-extern int gzip_main(int argc, char** argv);
-extern int halt_main(int argc, char** argv);
-extern int head_main(int argc, char** argv);
-extern int hostid_main(int argc, char** argv);
-extern int hostname_main(int argc, char** argv);
-extern int id_main(int argc, char** argv);
-extern int init_main(int argc, char** argv);
-extern int insmod_main(int argc, char** argv);
-extern int kill_main(int argc, char** argv);
-extern int length_main(int argc, char** argv);
-extern int ln_main(int argc, char** argv);
-extern int loadacm_main(int argc, char** argv);
-extern int loadfont_main(int argc, char** argv);
-extern int loadkmap_main(int argc, char** argv);
-extern int losetup_main(int argc, char** argv);
-extern int logger_main(int argc, char **argv);
-extern int logname_main(int argc, char **argv);
-extern int ls_main(int argc, char** argv);
-extern int lsmod_main(int argc, char** argv);
-extern int makedevs_main(int argc, char** argv);
-extern int md5sum_main(int argc, char** argv);
-extern int mkdir_main(int argc, char** argv);
-extern int mkfifo_main(int argc, char **argv);
-extern int mkfs_minix_main(int argc, char **argv);
-extern int mknod_main(int argc, char** argv);
-extern int mkswap_main(int argc, char** argv);
-extern int mktemp_main(int argc, char **argv);
-extern int nc_main(int argc, char** argv);
-extern int more_main(int argc, char** argv);
-extern int mount_main(int argc, char** argv);
-extern int mt_main(int argc, char** argv);
-extern int nslookup_main(int argc, char **argv);
-extern int ping_main(int argc, char **argv);
-extern int poweroff_main(int argc, char **argv);
-extern int printf_main(int argc, char** argv);
-extern int ps_main(int argc, char** argv);
-extern int pwd_main(int argc, char** argv);
-extern int rdate_main(int argc, char** argv);
-extern int reboot_main(int argc, char** argv);
-extern int renice_main(int argc, char** argv);
-extern int reset_main(int argc, char** argv);
-extern int rm_main(int argc, char** argv);
-extern int rmdir_main(int argc, char **argv);
-extern int rmmod_main(int argc, char** argv);
-extern int sed_main(int argc, char** argv);
-extern int sfdisk_main(int argc, char** argv);
-extern int setkeycodes_main(int argc, char** argv);
-extern int shell_main(int argc, char** argv);
-extern int sleep_main(int argc, char** argv);
-extern int sort_main(int argc, char** argv);
-extern int swap_on_off_main(int argc, char** argv);
-extern int sync_main(int argc, char** argv);
-extern int syslogd_main(int argc, char **argv);
-extern int tail_main(int argc, char** argv);
-extern int tar_main(int argc, char** argv);
-extern int tee_main(int argc, char** argv);
-extern int test_main(int argc, char** argv);
-extern int telnet_main(int argc, char** argv);
-extern int touch_main(int argc, char** argv);
-extern int tr_main(int argc, char** argv);
-extern int true_main(int argc, char** argv);
-extern int tput_main(int argc, char** argv);
-extern int tryopen_main(int argc, char** argv);
-extern int tty_main(int argc, char** argv);
-extern int umount_main(int argc, char** argv);
-extern int uname_main(int argc, char** argv);
-extern int uniq_main(int argc, char** argv);
-extern int unix2dos_main(int argc, char** argv);
-extern int unrpm_main(int argc, char** argv);
-extern int update_main(int argc, char** argv);
-extern int uptime_main(int argc, char** argv);
-extern int usleep_main(int argc, char** argv);
-extern int uuencode_main(int argc, char** argv);
-extern int uudecode_main(int argc, char** argv);
-extern int wc_main(int argc, char** argv);
-extern int wget_main(int argc, char** argv);
-extern int which_main(int argc, char** argv);
-extern int whoami_main(int argc, char** argv);
-extern int xargs_main(int argc, char** argv);
-extern int yes_main(int argc, char** argv);
-
-extern const char ar_usage[];
-extern const char basename_usage[];
-extern const char cat_usage[];
-extern const char chgrp_usage[];
-extern const char chmod_usage[];
-extern const char chown_usage[];
-extern const char chroot_usage[];
-extern const char chvt_usage[];
-extern const char clear_usage[];
-extern const char cp_usage[];
-extern const char cut_usage[];
-extern const char date_usage[];
-extern const char dc_usage[];
-extern const char dd_usage[];
-extern const char deallocvt_usage[];
-extern const char df_usage[];
-extern const char dirname_usage[];
-extern const char dmesg_usage[];
-extern const char dos2unix_usage[];
-extern const char du_usage[];
-extern const char dumpkmap_usage[];
-extern const char dutmp_usage[];
-extern const char echo_usage[];
-extern const char expr_usage[];
-extern const char false_usage[];
-extern const char fdflush_usage[];
-extern const char find_usage[];
-extern const char free_usage[];
-extern const char freeramdisk_usage[];
-extern const char fsck_minix_usage[];
-extern const char grep_usage[];
-extern const char gunzip_usage[];
-extern const char gzip_usage[];
-extern const char halt_usage[];
-extern const char head_usage[];
-extern const char hostid_usage[];
-extern const char hostname_usage[];
-extern const char id_usage[];
-extern const char insmod_usage[];
-extern const char kill_usage[];
-extern const char killall_usage[];
-extern const char length_usage[];
-extern const char ln_usage[];
-extern const char loadacm_usage[];
-extern const char loadfont_usage[];
-extern const char loadkmap_usage[];
-extern const char logger_usage[];
-extern const char logname_usage[];
-extern const char ls_usage[];
-extern const char lsmod_usage[];
-extern const char makedevs_usage[];
-extern const char md5sum_usage[];
-extern const char mkdir_usage[];
-extern const char mkfifo_usage[];
-extern const char mkfs_minix_usage[];
-extern const char mknod_usage[];
-extern const char mkswap_usage[];
-extern const char mktemp_usage[];
-extern const char more_usage[];
-extern const char mount_usage[]; 
-extern const char mt_usage[];
-extern const char mv_usage[];
-extern const char nc_usage[];
-extern const char nslookup_usage[];
-extern const char ping_usage[];
-extern const char poweroff_usage[];
-extern const char printf_usage[];
-extern const char ps_usage[];
-extern const char pwd_usage[];
-extern const char rdate_usage[];
-extern const char reboot_usage[];
-extern const char renice_usage[];
-extern const char reset_usage[];
-extern const char rm_usage[];
-extern const char rmdir_usage[];
-extern const char rmmod_usage[];
-extern const char sed_usage[];
-extern const char setkeycodes_usage[];
-extern const char shell_usage[];
-extern const char sleep_usage[];
-extern const char sort_usage[];
-extern const char swapoff_usage[];
-extern const char swapon_usage[];
-extern const char sync_usage[];
-extern const char syslogd_usage[];
-extern const char tail_usage[];
-extern const char tar_usage[];
-extern const char tee_usage[];
-extern const char telnet_usage[];
-extern const char test_usage[];
-extern const char touch_usage[];
-extern const char tr_usage[];
-extern const char true_usage[];
-extern const char tty_usage[];
-extern const char umount_usage[];
-extern const char uname_usage[];
-extern const char uniq_usage[];
-extern const char unix2dos_usage[];
-extern const char unrpm_usage[];
-extern const char update_usage[];
-extern const char uptime_usage[];
-extern const char usleep_usage[];
-extern const char uudecode_usage[];
-extern const char uuencode_usage[];
-extern const char wc_usage[];
-extern const char wget_usage[];
-extern const char which_usage[];
-extern const char whoami_usage[];
-extern const char xargs_usage[];
-extern const char yes_usage[];
-
-extern const char *applet_name;
-
-extern void usage(const char *usage) __attribute__ ((noreturn));
-extern void errorMsg(const char *s, ...) __attribute__ ((format (printf, 1, 2)));
-extern void logperror(char *s);
-extern void fatalError(const char *s, ...) __attribute__ ((noreturn, format (printf, 1, 2)));
-
-const char *modeString(int mode);
-const char *timeString(time_t timeVal);
-int isDirectory(const char *name, const int followLinks, struct stat *statBuf);
-int isDevice(const char *name);
-
-typedef struct ino_dev_hash_bucket_struct {
-  struct ino_dev_hash_bucket_struct *next;
-  ino_t ino;
-  dev_t dev;
-  char name[1];
-} ino_dev_hashtable_bucket_t;
-int is_in_ino_dev_hashtable(const struct stat *statbuf, char **name);
-void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name);
-void reset_ino_dev_hashtable(void);
-
-int copyFile(const char *srcName, const char *destName,
-		 int setModes, int followLinks, int forceFlag);
-int copySubFile(int srcFd, int dstFd, size_t remaining);
-char *buildName(const char *dirName, const char *fileName);
-int makeString(int argc, const char **argv, char *buf, int bufLen);
-char *getChunk(int size);
-char *chunkstrdup(const char *str);
-void freeChunks(void);
-int fullWrite(int fd, const char *buf, int len);
-int fullRead(int fd, char *buf, int len);
-int recursiveAction(const char *fileName, int recurse, int followLinks, int depthFirst,
-	  int (*fileAction) (const char *fileName, struct stat* statbuf, void* userData),
-	  int (*dirAction) (const char *fileName, struct stat* statbuf, void* userData),
-	  void* userData);
-
-extern int createPath (const char *name, int mode);
-extern int parse_mode( const char* s, mode_t* theMode);
-
-extern int get_kernel_revision(void);
-
-extern int get_console_fd(char* tty_name);
-extern struct mntent *findMountPoint(const char *name, const char *table);
-extern void write_mtab(char* blockDevice, char* directory, 
-	char* filesystemType, long flags, char* string_flags);
-extern void erase_mtab(const char * name);
-extern void mtab_read(void);
-extern char *mtab_first(void **iter);
-extern char *mtab_next(void **iter);
-extern char *mtab_getinfo(const char *match, const char which);
-extern int check_wildcard_match(const char* text, const char* pattern);
-extern long getNum (const char *cp);
-extern pid_t* findPidByName( char* pidName);
-extern int find_real_root_device_name(char* name);
-extern char *get_line_from_file(FILE *file);
-extern void print_file(FILE *file);
-extern int print_file_by_name(char *filename);
-extern char process_escape_sequence(char **ptr);
-extern char *get_last_path_component(char *path);
-// extern void xregcomp(regex_t *preg, const char *regex, int cflags);
-
-#ifndef DMALLOC 
-extern void *xmalloc (size_t size);
-extern void *xrealloc(void *old, size_t size);
-extern void *xcalloc(size_t nmemb, size_t size);
-extern char *xstrdup (const char *s);
-#endif
-extern char *xstrndup (const char *s, int n);
-
-
-/* These parse entries in /etc/passwd and /etc/group.  This is desirable
- * for BusyBox since we want to avoid using the glibc NSS stuff, which
- * increases target size and is often not needed embedded systems.  */
-extern long my_getpwnam(char *name);
-extern long my_getgrnam(char *name);
-extern void my_getpwuid(char *name, long uid);
-extern void my_getgrgid(char *group, long gid);
-extern long my_getpwnamegid(char *name);
-
-extern int device_open(char *device, int mode);
-
-#if defined BB_FEATURE_MOUNT_LOOP
-extern int del_loop(const char *device);
-extern int set_loop(const char *device, const char *file, int offset, int *loopro);
-extern char *find_unused_loop_device (void);
-#endif
-
-
-#if (__GLIBC__ < 2) && (defined BB_SYSLOGD || defined BB_INIT)
-extern int vdprintf(int d, const char *format, va_list ap);
-#endif
-
-#if defined BB_NFSMOUNT
-int nfsmount(const char *spec, const char *node, int *flags,
-	     char **extra_opts, char **mount_opts, int running_bg);
-#endif
-
-#ifndef RB_POWER_OFF
-/* Stop system and switch power off if possible.  */
-#define RB_POWER_OFF   0x4321fedc
-#endif
-
-/* Include our own copy of struct sysinfo to avoid binary compatability
- * problems with Linux 2.4, which changed things.  Grumble, grumble. */
-//struct sysinfo {
-//	  long uptime;			/* Seconds since boot */
-//	  unsigned long loads[3];		/* 1, 5, and 15 minute load averages */
-//	  unsigned long totalram;		/* Total usable main memory size */
-//	  unsigned long freeram;		/* Available memory size */
-//	  unsigned long sharedram;	/* Amount of shared memory */
-//	  unsigned long bufferram;	/* Memory used by buffers */
-//	  unsigned long totalswap;	/* Total swap space size */
-//	  unsigned long freeswap;		/* swap space still available */
-//	  unsigned short procs;		/* Number of current processes */
-//	  unsigned long totalhigh;	/* Total high memory size */
-//	  unsigned long freehigh;		/* Available high memory size */
-//	  unsigned int mem_unit;		/* Memory unit size in bytes */
-//	  char _f[20-2*sizeof(long)-sizeof(int)];	/* Padding: libc5 uses this.. */
-//};
-extern int sysinfo (struct sysinfo* info);
-
-/* Bit map related macros -- libc5 doens't provide these... sigh.  */
-#ifndef setbit
-#define NBBY            CHAR_BIT
-#define setbit(a,i)     ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define clrbit(a,i)     ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define isset(a,i)      ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define isclr(a,i)      (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-#endif
-
-/* Merge from busybox 0.60.5 */
-#define error_msg				errorMsg
-#define perror_msg(FORMAT,...)	error_msg(FORMAT ": %s", ## __VA_ARGS__, strerror(errno))
-#define recursive_action		recursiveAction
-
-#define safe_strncpy(DST, SRC, SIZE) do {		\
-  (DST)[SIZE-1] = '\0';							\
-  return strncpy((DST), (SRC),(SIZE)-1);		\
-} while (0)
-
-#endif /* _BB_INTERNAL_H_ */
diff --git a/mdk-stage1/insmod-busybox/insmod-frontend.c b/mdk-stage1/insmod-busybox/insmod-frontend.c
deleted file mode 100644
index 963a96893..000000000
--- a/mdk-stage1/insmod-busybox/insmod-frontend.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-
-
-int insmod_main( int argc, char **argv);
-
-int main( int argc, char **argv)
-{
-	printf("Using insmod provided by busybox.\n");
-	return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-busybox/insmod.c b/mdk-stage1/insmod-busybox/insmod.c
deleted file mode 100644
index e6e5b8f5f..000000000
--- a/mdk-stage1/insmod-busybox/insmod.c
+++ /dev/null
@@ -1,3758 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Mini insmod implementation for busybox
- *
- * This version of insmod supports x86, ARM, SH3/4, powerpc, m68k, 
- * MIPS, and x86-64.
- *
- *
- * Copyright (C) 1999,2000 by Lineo, inc. and Erik Andersen
- * Copyright (C) 1999-2002 Erik Andersen <andersee@debian.org>
- * Written by Erik Andersen and Ron Alder <alder@lineo.com>
- *
- * Modified by Bryan Rittmeyer <bryan@ixiacom.com> to support SH4
- * and (theoretically) SH3. I have only tested SH4 in little endian mode.
- *
- * Modified by Alcove, Julien Gaulmin <julien.gaulmin@alcove.fr> and
- * Nicolas Ferre <nicolas.ferre@alcove.fr> to support ARM7TDMI.  Only
- * very minor changes required to also work with StrongArm and presumably
- * all ARM based systems.
- *
- * Magnus Damm <damm@opensource.se> 22-May-2002.
- *   The plt and got code are now using the same structs.
- *   Added generic linked list code to fully support PowerPC.
- *   Replaced the mess in arch_apply_relocation() with architecture blocks.
- *   The arch_create_got() function got cleaned up with architecture blocks.
- *   These blocks should be easy maintain and sync with obj_xxx.c in modutils.
- *
- * Magnus Damm <damm@opensource.se> added PowerPC support 20-Feb-2001.
- *   PowerPC specific code stolen from modutils-2.3.16, 
- *   written by Paul Mackerras, Copyright 1996, 1997 Linux International.
- *   I've only tested the code on mpc8xx platforms in big-endian mode.
- *   Did some cleanup and added BB_USE_xxx_ENTRIES...
- *
- * Quinn Jensen <jensenq@lineo.com> added MIPS support 23-Feb-2001.
- *   based on modutils-2.4.2
- *   MIPS specific support for Elf loading and relocation.
- *   Copyright 1996, 1997 Linux International.
- *   Contributed by Ralf Baechle <ralf@gnu.ai.mit.edu>
- *
- * Based almost entirely on the Linux modutils-2.3.11 implementation.
- *   Copyright 1996, 1997 Linux International.
- *   New implementation contributed by Richard Henderson <rth@tamu.edu>
- *   Based on original work by Bjorn Ekwall <bj0rn@blox.se>
- *   Restructured (and partly rewritten) by:
- *   Bj�rn Ekwall <bj0rn@blox.se> February 1999
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include "../insmod.h"
-#include <stdlib.h>
-#include <stdio.h>
-#include <stddef.h>
-#include <errno.h>
-#include <unistd.h>
-#include <dirent.h>
-#include <ctype.h>
-#include <assert.h>
-#include <string.h>
-#include <fcntl.h>
-#include <sys/utsname.h>
-#include "busybox.h"
-
-#ifdef BB_FEATURE_NEW_MODULE_INTERFACE
-# undef BB_FEATURE_OLD_MODULE_INTERFACE
-# define new_sys_init_module	init_module
-#else
-# define old_sys_init_module	init_module
-#endif
-
-/* FIXME: Remove once we switched to dietlibc 0.22 */
-#if 0
-
-#undef new_sys_init_module
-#define __NR_new_sys_init_module  __NR_init_module
-struct new_module;
-_syscall2(int, new_sys_init_module, const char *, name,
-		  const struct new_module *, info)
-
-#undef old_sys_init_module
-#define __NR_old_sys_init_module  __NR_init_module
-struct old_mod_routines;
-struct old_symbol_table;
-_syscall5(int, old_sys_init_module, const char *, name, char *, code,
-		  unsigned, codesize, struct old_mod_routines *, routines,
-		  struct old_symbol_table *, symtab)
-
-_syscall1(int, delete_module, const char *, name)
-
-#if defined(__i386__) || defined(__m68k__) || defined(__arm__)
-/* Jump through hoops to fixup error return codes */
-#define __NR__create_module  __NR_create_module
-static inline _syscall2(long, _create_module, const char *, name, size_t,
-						size)
-unsigned long create_module(const char *name, size_t size)
-{
-	long ret = _create_module(name, size);
-
-	if (ret == -1 && errno > 125) {
-		ret = -errno;
-		errno = 0;
-	}
-	return ret;
-}
-#else
-_syscall2(unsigned long, create_module, const char *, name, size_t, size)
-#endif
-
-#endif
-
-#ifdef BB_FEATURE_INSMOD_LOADINKMEM
-#define LOADBITS 0	
-#else
-#define LOADBITS 1
-#endif
-
-#if defined(__arm__)
-#define BB_USE_PLT_ENTRIES
-#define BB_PLT_ENTRY_SIZE 8
-#define BB_USE_GOT_ENTRIES
-#define BB_GOT_ENTRY_SIZE 8
-#define BB_USE_SINGLE
-
-#define MATCH_MACHINE(x) (x == EM_ARM)
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
-#define ELFCLASSM	ELFCLASS32
-#endif
-
-#if defined(__i386__)
-#define BB_USE_GOT_ENTRIES
-#define BB_GOT_ENTRY_SIZE 4
-#define BB_USE_SINGLE
-
-#ifndef EM_486
-#define MATCH_MACHINE(x) (x == EM_386)
-#else
-#define MATCH_MACHINE(x) (x == EM_386 || x == EM_486)
-#endif
-
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
-#define ELFCLASSM	ELFCLASS32
-#endif
-
-#if defined(__x86_64__)
-#define BB_USE_GOT_ENTRIES
-#define BB_GOT_ENTRY_SIZE 8
-#define BB_USE_SINGLE
-
-#define MATCH_MACHINE(x) (x == EM_X86_64)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
-#define ELFCLASSM	ELFCLASS64
-#endif
-
-#if defined(__mc68000__) 
-#define BB_USE_GOT_ENTRIES
-#define BB_GOT_ENTRY_SIZE 4
-#define BB_USE_SINGLE
-
-#define MATCH_MACHINE(x) (x == EM_68K)
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
-#endif
-
-#if defined(__mips__)
-/* Account for ELF spec changes.  */
-#ifndef EM_MIPS_RS3_LE
-#ifdef EM_MIPS_RS4_BE
-#define EM_MIPS_RS3_LE	EM_MIPS_RS4_BE
-#else
-#define EM_MIPS_RS3_LE	10
-#endif
-#endif /* !EM_MIPS_RS3_LE */
-
-#define MATCH_MACHINE(x) (x == EM_MIPS || x == EM_MIPS_RS3_LE)
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
-#define ELFCLASSM	ELFCLASS32
-#define ARCHDATAM       "__dbe_table"
-#endif
-
-#if defined(__powerpc__)
-#define BB_USE_PLT_ENTRIES
-#define BB_PLT_ENTRY_SIZE 16
-#define BB_USE_PLT_LIST
-#define BB_LIST_ARCHTYPE ElfW(Addr) 
-#define BB_USE_LIST
-
-#define MATCH_MACHINE(x) (x == EM_PPC)
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
-#define ELFCLASSM	ELFCLASS32
-#define ARCHDATAM       "__ftr_fixup"
-#endif
-
-#if defined(__sh__)
-#define BB_USE_GOT_ENTRIES
-#define BB_GOT_ENTRY_SIZE 4
-#define BB_USE_SINGLE
-
-#define MATCH_MACHINE(x) (x == EM_SH)
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
-#define ELFCLASSM	ELFCLASS32
-
-/* the SH changes have only been tested on the SH4 in =little endian= mode */
-/* I'm not sure about big endian, so let's warn: */
-
-#if (defined(__SH4__) || defined(__SH3__)) && defined(__BIG_ENDIAN__)
-#error insmod.c may require changes for use on big endian SH4/SH3
-#endif
-
-/* it may or may not work on the SH1/SH2... So let's error on those
-   also */
-#if (defined(__sh__) && (!(defined(__SH3__) || defined(__SH4__))))
-#error insmod.c may require changes for non-SH3/SH4 use
-#endif
-#endif
-
-#ifndef SHT_RELM
-#error Sorry, but insmod.c does not yet support this architecture...
-#endif
-
-//----------------------------------------------------------------------------
-//--------modutils module.h, lines 45-242
-//----------------------------------------------------------------------------
-
-/* Definitions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-#ifndef MODUTILS_MODULE_H
-#define MODUTILS_MODULE_H
-
-/* This file contains the structures used by the 2.0 and 2.1 kernels.
-   We do not use the kernel headers directly because we do not wish
-   to be dependant on a particular kernel version to compile insmod.  */
-
-
-/*======================================================================*/
-/* The structures used by Linux 2.0.  */
-
-/* The symbol format used by get_kernel_syms(2).  */
-struct old_kernel_sym
-{
-  unsigned long value;
-  char name[60];
-};
-
-struct old_module_ref
-{
-  unsigned long module;		/* kernel addresses */
-  unsigned long next;
-};
-
-struct old_module_symbol
-{
-  unsigned long addr;
-  unsigned long name;
-};
-
-struct old_symbol_table
-{
-  int size;			/* total, including string table!!! */
-  int n_symbols;
-  int n_refs;
-  struct old_module_symbol symbol[0]; /* actual size defined by n_symbols */
-  struct old_module_ref ref[0];	/* actual size defined by n_refs */
-};
-
-struct old_mod_routines
-{
-  unsigned long init;
-  unsigned long cleanup;
-};
-
-struct old_module
-{
-  unsigned long next;
-  unsigned long ref;		/* the list of modules that refer to me */
-  unsigned long symtab;
-  unsigned long name;
-  int size;			/* size of module in pages */
-  unsigned long addr;		/* address of module */
-  int state;
-  unsigned long cleanup;	/* cleanup routine */
-};
-
-/* Sent to init_module(2) or'ed into the code size parameter.  */
-static const int OLD_MOD_AUTOCLEAN = 0x40000000; /* big enough, but no sign problems... */
-
-int get_kernel_syms(struct old_kernel_sym *);
-int old_sys_init_module(const char *name, char *code, unsigned codesize,
-			struct old_mod_routines *, struct old_symbol_table *);
-
-/*======================================================================*/
-/* For sizeof() which are related to the module platform and not to the
-   environment isnmod is running in, use sizeof_xx instead of sizeof(xx).  */
-
-#define tgt_sizeof_char		sizeof(char)
-#define tgt_sizeof_short	sizeof(short)
-#define tgt_sizeof_int		sizeof(int)
-#define tgt_sizeof_long		sizeof(long)
-#define tgt_sizeof_char_p	sizeof(char *)
-#define tgt_sizeof_void_p	sizeof(void *)
-#define tgt_long		long
-
-#if defined(__sparc__) && !defined(__sparc_v9__) && defined(ARCH_sparc64)
-#undef tgt_sizeof_long
-#undef tgt_sizeof_char_p
-#undef tgt_sizeof_void_p
-#undef tgt_long
-static const int tgt_sizeof_long = 8;
-static const int tgt_sizeof_char_p = 8;
-static const int tgt_sizeof_void_p = 8;
-#define tgt_long		long long
-#endif
-
-/*======================================================================*/
-/* The structures used in Linux 2.1.  */
-
-/* Note: new_module_symbol does not use tgt_long intentionally */
-struct new_module_symbol
-{
-  unsigned long value;
-  unsigned long name;
-};
-
-struct new_module_persist;
-
-struct new_module_ref
-{
-  unsigned tgt_long dep;		/* kernel addresses */
-  unsigned tgt_long ref;
-  unsigned tgt_long next_ref;
-};
-
-struct new_module
-{
-  unsigned tgt_long size_of_struct;	/* == sizeof(module) */
-  unsigned tgt_long next;
-  unsigned tgt_long name;
-  unsigned tgt_long size;
-
-  tgt_long usecount;
-  unsigned tgt_long flags;		/* AUTOCLEAN et al */
-
-  unsigned nsyms;
-  unsigned ndeps;
-
-  unsigned tgt_long syms;
-  unsigned tgt_long deps;
-  unsigned tgt_long refs;
-  unsigned tgt_long init;
-  unsigned tgt_long cleanup;
-  unsigned tgt_long ex_table_start;
-  unsigned tgt_long ex_table_end;
-#ifdef __alpha__
-  unsigned tgt_long gp;
-#endif
-  /* Everything after here is extension.  */
-  unsigned tgt_long persist_start;
-  unsigned tgt_long persist_end;
-  unsigned tgt_long can_unload;
-  unsigned tgt_long runsize;
-#ifdef BB_FEATURE_NEW_MODULE_INTERFACE
-  const char *kallsyms_start;     /* All symbols for kernel debugging */
-  const char *kallsyms_end;
-  const char *archdata_start;     /* arch specific data for module */
-  const char *archdata_end;
-  const char *kernel_data;        /* Reserved for kernel internal use */
-#endif
-};
-
-#ifdef ARCHDATAM
-#define ARCHDATA_SEC_NAME ARCHDATAM
-#else
-#define ARCHDATA_SEC_NAME "__archdata"
-#endif
-#define KALLSYMS_SEC_NAME "__kallsyms"
-
-
-struct new_module_info
-{
-  unsigned long addr;
-  unsigned long size;
-  unsigned long flags;
-	   long usecount;
-};
-
-/* Bits of module.flags.  */
-static const int NEW_MOD_RUNNING = 1;
-static const int NEW_MOD_DELETED = 2;
-static const int NEW_MOD_AUTOCLEAN = 4;
-static const int NEW_MOD_VISITED = 8;
-static const int NEW_MOD_USED_ONCE = 16;
-
-int new_sys_init_module(const char *name, const struct new_module *);
-int query_module(const char *name, int which, void *buf, size_t bufsize,
-		 size_t *ret);
-
-/* Values for query_module's which.  */
-
-static const int QM_MODULES = 1;
-static const int QM_DEPS = 2;
-static const int QM_REFS = 3;
-static const int QM_SYMBOLS = 4;
-static const int QM_INFO = 5;
-
-/*======================================================================*/
-/* The system calls unchanged between 2.0 and 2.1.  */
-
-unsigned long create_module(const char *, size_t);
-int delete_module(const char *);
-
-
-#endif /* module.h */
-
-//----------------------------------------------------------------------------
-//--------end of modutils module.h
-//----------------------------------------------------------------------------
-
-
-
-//----------------------------------------------------------------------------
-//--------modutils obj.h, lines 253-462
-//----------------------------------------------------------------------------
-
-/* Elf object file loading and relocation routines.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-#ifndef MODUTILS_OBJ_H
-static const int MODUTILS_OBJ_H = 1;
-
-/* The relocatable object is manipulated using elfin types.  */
-
-#include <stdio.h>
-#include <elf.h>
-#include <endian.h>
-
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define ELFDATAM    ELFDATA2LSB
-#elif __BYTE_ORDER == __BIG_ENDIAN
-#define ELFDATAM    ELFDATA2MSB
-#endif
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-#  define ElfW(x)  Elf32_ ## x
-#  define ELFW(x)  ELF32_ ## x
-# else
-#  define ElfW(x)  Elf64_ ## x
-#  define ELFW(x)  ELF64_ ## x
-# endif
-#endif
-
-/* For some reason this is missing from libc5.  */
-#ifndef ELF32_ST_INFO
-# define ELF32_ST_INFO(bind, type)       (((bind) << 4) + ((type) & 0xf))
-#endif
-
-#ifndef ELF64_ST_INFO
-# define ELF64_ST_INFO(bind, type)       (((bind) << 4) + ((type) & 0xf))
-#endif
-
-struct obj_string_patch;
-struct obj_symbol_patch;
-
-struct obj_section
-{
-  ElfW(Shdr) header;
-  const char *name;
-  char *contents;
-  struct obj_section *load_next;
-  int idx;
-};
-
-struct obj_symbol
-{
-  struct obj_symbol *next;	/* hash table link */
-  const char *name;
-  unsigned long value;
-  unsigned long size;
-  int secidx;			/* the defining section index/module */
-  int info;
-  int ksymidx;			/* for export to the kernel symtab */
-  int referenced;		/* actually used in the link */
-};
-
-/* Hardcode the hash table size.  We shouldn't be needing so many
-   symbols that we begin to degrade performance, and we get a big win
-   by giving the compiler a constant divisor.  */
-
-#define HASH_BUCKETS  521
-
-struct obj_file
-{
-  ElfW(Ehdr) header;
-  ElfW(Addr) baseaddr;
-  struct obj_section **sections;
-  struct obj_section *load_order;
-  struct obj_section **load_order_search_start;
-  struct obj_string_patch *string_patches;
-  struct obj_symbol_patch *symbol_patches;
-  int (*symbol_cmp)(const char *, const char *);
-  unsigned long (*symbol_hash)(const char *);
-  unsigned long local_symtab_size;
-  struct obj_symbol **local_symtab;
-  struct obj_symbol *symtab[HASH_BUCKETS];
-};
-
-enum obj_reloc
-{
-  obj_reloc_ok,
-  obj_reloc_overflow,
-  obj_reloc_dangerous,
-  obj_reloc_unhandled
-};
-
-struct obj_string_patch
-{
-  struct obj_string_patch *next;
-  int reloc_secidx;
-  ElfW(Addr) reloc_offset;
-  ElfW(Addr) string_offset;
-};
-
-struct obj_symbol_patch
-{
-  struct obj_symbol_patch *next;
-  int reloc_secidx;
-  ElfW(Addr) reloc_offset;
-  struct obj_symbol *sym;
-};
-
-
-/* Generic object manipulation routines.  */
-
-static unsigned long obj_elf_hash(const char *);
-
-static unsigned long obj_elf_hash_n(const char *, unsigned long len);
-
-static struct obj_symbol *obj_find_symbol (struct obj_file *f,
-					 const char *name);
-
-static ElfW(Addr) obj_symbol_final_value(struct obj_file *f,
-				  struct obj_symbol *sym);
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-static void obj_set_symbol_compare(struct obj_file *f,
-			    int (*cmp)(const char *, const char *),
-			    unsigned long (*hash)(const char *));
-#endif
-
-static struct obj_section *obj_find_section (struct obj_file *f,
-					   const char *name);
-
-static void obj_insert_section_load_order (struct obj_file *f,
-				    struct obj_section *sec);
-
-static struct obj_section *obj_create_alloced_section (struct obj_file *f,
-						const char *name,
-						unsigned long align,
-						unsigned long size);
-
-static struct obj_section *obj_create_alloced_section_first (struct obj_file *f,
-						      const char *name,
-						      unsigned long align,
-						      unsigned long size);
-
-static void *obj_extend_section (struct obj_section *sec, unsigned long more);
-
-static int obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-		     const char *string);
-
-#ifdef BB_FEATURE_NEW_MODULE_INTERFACE
-static int obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-		     struct obj_symbol *sym);
-#endif
-
-static int obj_check_undefineds(struct obj_file *f);
-
-static void obj_allocate_commons(struct obj_file *f);
-
-static unsigned long obj_load_size (struct obj_file *f);
-
-static int obj_relocate (struct obj_file *f, ElfW(Addr) base);
-
-static struct obj_file *obj_load(FILE *f, int loadprogbits);
-
-static int obj_create_image (struct obj_file *f, char *image);
-
-/* Architecture specific manipulation routines.  */
-
-static struct obj_file *arch_new_file (void);
-
-static struct obj_section *arch_new_section (void);
-
-static struct obj_symbol *arch_new_symbol (void);
-
-static enum obj_reloc arch_apply_relocation (struct obj_file *f,
-				      struct obj_section *targsec,
-				      struct obj_section *symsec,
-				      struct obj_symbol *sym,
-				      ElfW(RelM) *rel, ElfW(Addr) value);
-
-static void arch_create_got (struct obj_file *f);
-
-#ifdef BB_FEATURE_NEW_MODULE_INTERFACE
-static int arch_init_module (struct obj_file *f, struct new_module *);
-#endif
-
-#endif /* obj.h */
-//----------------------------------------------------------------------------
-//--------end of modutils obj.h
-//----------------------------------------------------------------------------
-
-
-
-
-
-#define _PATH_MODULES	"/lib/modules"
-static const int STRVERSIONLEN = 32;
-
-/*======================================================================*/
-
-static const int flag_force_load = 1;
-static const int flag_autoclean = 0;
-static const int flag_quiet = 0;
-static const int flag_export = 1;
-
-
-/*======================================================================*/
-
-#if defined(BB_USE_LIST)
-
-struct arch_list_entry
-{
-	struct arch_list_entry *next;
-	BB_LIST_ARCHTYPE addend;
-	int offset;
-	int inited : 1;
-};
-
-#endif
-
-#if defined(BB_USE_SINGLE)
-
-struct arch_single_entry
-{
-	int offset;
-	int inited : 1;
-	int allocated : 1;
-};
-
-#endif
-
-#if defined(__mips__)
-struct mips_hi16
-{
-  struct mips_hi16 *next;
-  Elf32_Addr *addr;
-  Elf32_Addr value;
-};
-#endif
-
-struct arch_file {
-	struct obj_file root;
-#if defined(BB_USE_PLT_ENTRIES)
-	struct obj_section *plt;
-#endif
-#if defined(BB_USE_GOT_ENTRIES)
-	struct obj_section *got;
-#endif
-#if defined(__mips__)
-	struct mips_hi16 *mips_hi16_list;
-#endif
-};
-
-struct arch_symbol {
-	struct obj_symbol root;
-#if defined(BB_USE_PLT_ENTRIES)
-#if defined(BB_USE_PLT_LIST)
-	struct arch_list_entry *pltent;
-#else
-	struct arch_single_entry pltent;
-#endif
-#endif
-#if defined(BB_USE_GOT_ENTRIES)
-	struct arch_single_entry gotent;
-#endif
-};
-
-
-struct external_module {
-	const char *name;
-	ElfW(Addr) addr;
-	int used;
-	size_t nsyms;
-	struct new_module_symbol *syms;
-};
-
-static struct new_module_symbol *ksyms;
-static size_t nksyms;
-
-static struct external_module *ext_modules;
-static int n_ext_modules;
-static int n_ext_modules_used;
-extern int delete_module(const char *);
-
-#ifndef FILENAME_MAX
-#define FILENAME_MAX 4095
-#endif
-
-static char m_filename[FILENAME_MAX];
-static char m_fullName[FILENAME_MAX];
-
-
-
-/*======================================================================*/
-
-static struct obj_file *arch_new_file(void)
-{
-	struct arch_file *f;
-	f = xmalloc(sizeof(*f));
-
-	memset(f, 0, sizeof(*f));
-
-	return &f->root;
-}
-
-static struct obj_section *arch_new_section(void)
-{
-	return xmalloc(sizeof(struct obj_section));
-}
-
-static struct obj_symbol *arch_new_symbol(void)
-{
-	struct arch_symbol *sym;
-	sym = xmalloc(sizeof(*sym));
-
-	memset(sym, 0, sizeof(*sym));
-
-	return &sym->root;
-}
-
-static enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
-					  struct obj_section *targsec,
-					  struct obj_section *symsec,
-					  struct obj_symbol *sym,
-				      ElfW(RelM) *rel, ElfW(Addr) v)
-{
-	struct arch_file *ifile = (struct arch_file *) f;
-	enum obj_reloc ret = obj_reloc_ok;
-	ElfW(Addr) *loc = (ElfW(Addr) *) (targsec->contents + rel->r_offset);
-	ElfW(Addr) dot = targsec->header.sh_addr + rel->r_offset;
-#if defined(BB_USE_GOT_ENTRIES) || defined(BB_USE_PLT_ENTRIES)
-	struct arch_symbol *isym = (struct arch_symbol *) sym;
-#endif
-#if defined(BB_USE_GOT_ENTRIES)
-	ElfW(Addr) got = ifile->got ? ifile->got->header.sh_addr : 0;
-#endif
-#if defined(BB_USE_PLT_ENTRIES)
-	ElfW(Addr) plt = ifile->plt ? ifile->plt->header.sh_addr : 0;
-	unsigned long *ip;
-#if defined(BB_USE_PLT_LIST)
-	struct arch_list_entry *pe;
-#else
-	struct arch_single_entry *pe;
-#endif
-#endif
-
-	switch (ELF32_R_TYPE(rel->r_info)) {
-
-#if defined(__arm__)
-	case R_ARM_NONE:
-		break;
-
-	case R_ARM_ABS32:
-		*loc += v;
-		break;
-		
-	case R_ARM_GOT32:
-		goto bb_use_got;
-
-	case R_ARM_GOTPC:
-		/* relative reloc, always to _GLOBAL_OFFSET_TABLE_ 
-		 * (which is .got) similar to branch, 
-		 * but is full 32 bits relative */
-
-		assert(got);
-		*loc += got - dot;
-		break;
-
-	case R_ARM_PC24:
-	case R_ARM_PLT32:
-		goto bb_use_plt;
-
-	case R_ARM_GOTOFF: /* address relative to the got */
-		assert(got);
-		*loc += v - got;
-		break;
-
-#elif defined(__i386__)
-
-	case R_386_NONE:
-		break;
-
-	case R_386_32:
-		*loc += v;
-		break;
-
-	case R_386_PLT32:
-	case R_386_PC32:
-		*loc += v - dot;
-		break;
-
-	case R_386_GLOB_DAT:
-	case R_386_JMP_SLOT:
-		*loc = v;
-		break;
-
-	case R_386_RELATIVE:
-		*loc += f->baseaddr;
-		break;
-
-	case R_386_GOTPC:
-		assert(got != 0);
-		*loc += got - dot;
-		break;
-
-	case R_386_GOT32:
-		goto bb_use_got;
-
-	case R_386_GOTOFF:
-		assert(got != 0);
-		*loc += v - got;
-		break;
-
-#elif defined(__x86_64__)
-
-	case R_X86_64_NONE:
-	  break;
-	  
-	case R_X86_64_64:
-	  *loc += v;
-	  break;
-
-	case R_X86_64_32:
-	  *(unsigned int *) loc += v;
-	  break;
-	  
-	case R_X86_64_32S:
-	  *(signed int *) loc += v;
-	  break;
-	  
-	case R_X86_64_16:
-	  *(unsigned short *) loc += v;
-	  break;
-	  
-	case R_X86_64_8:
-	  *(unsigned char *) loc += v;
-	  break;
-	  
-	case R_X86_64_PC32:
-	  *(unsigned int *) loc += v - dot;
-	  break;
-	  
-	case R_X86_64_PC16:
-	  *(unsigned short *) loc += v - dot;
-	  break;
-	  
-	case R_X86_64_PC8:
-	  *(unsigned char *) loc += v - dot;
-	  break;
-
-	case R_X86_64_GLOB_DAT:
-	case R_X86_64_JUMP_SLOT:
-	  *loc = v;
-	  break;
-	  
-	case R_X86_64_RELATIVE:
-	  *loc += f->baseaddr;
-	  break;
-	  
-	case R_X86_64_GOT32:
-	case R_X86_64_GOTPCREL:
-	  goto bb_use_got;
-
-#elif defined(__mc68000__)
-
-	case R_68K_NONE:
-		break;
-
-	case R_68K_32:
-		*loc += v;
-		break;
-
-	case R_68K_8:
-		if (v > 0xff) {
-			ret = obj_reloc_overflow;
-		}
-		*(char *)loc = v;
-		break;
-
-	case R_68K_16:
-		if (v > 0xffff) {
-			ret = obj_reloc_overflow;
-		}
-		*(short *)loc = v;
-		break;
-
-	case R_68K_PC8:
-		v -= dot;
-		if ((Elf32_Sword)v > 0x7f || 
-		    (Elf32_Sword)v < -(Elf32_Sword)0x80) {
-			ret = obj_reloc_overflow;
-		}
-		*(char *)loc = v;
-		break;
-
-	case R_68K_PC16:
-		v -= dot;
-		if ((Elf32_Sword)v > 0x7fff || 
-		    (Elf32_Sword)v < -(Elf32_Sword)0x8000) {
-			ret = obj_reloc_overflow;
-		}
-		*(short *)loc = v;
-		break;
-
-	case R_68K_PC32:
-		*(int *)loc = v - dot;
-		break;
-
-	case R_68K_GLOB_DAT:
-	case R_68K_JMP_SLOT:
-		*loc = v;
-		break;
-
-	case R_68K_RELATIVE:
-		*(int *)loc += f->baseaddr;
-		break;
-
-	case R_68K_GOT32:
-		goto bb_use_got;
-
-	case R_68K_GOTOFF:
-		assert(got != 0);
-		*loc += v - got;
-		break;
-
-#elif defined(__mips__)
-
-	case R_MIPS_NONE:
-		break;
-
-	case R_MIPS_32:
-		*loc += v;
-		break;
-
-	case R_MIPS_26:
-		if (v % 4)
-			ret = obj_reloc_dangerous;
-		if ((v & 0xf0000000) != ((dot + 4) & 0xf0000000))
-			ret = obj_reloc_overflow;
-		*loc =
-		    (*loc & ~0x03ffffff) | ((*loc + (v >> 2)) &
-					    0x03ffffff);
-		break;
-
-	case R_MIPS_HI16:
-		{
-			struct mips_hi16 *n;
-
-			/* We cannot relocate this one now because we don't know the value
-			   of the carry we need to add.  Save the information, and let LO16
-			   do the actual relocation.  */
-			n = (struct mips_hi16 *) xmalloc(sizeof *n);
-			n->addr = loc;
-			n->value = v;
-			n->next = ifile->mips_hi16_list;
-			ifile->mips_hi16_list = n;
-	       		break;
-		}
-
-	case R_MIPS_LO16:
-		{
-			unsigned long insnlo = *loc;
-			Elf32_Addr val, vallo;
-
-			/* Sign extend the addend we extract from the lo insn.  */
-			vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
-			if (ifile->mips_hi16_list != NULL) {
-				struct mips_hi16 *l;
-
-				l = ifile->mips_hi16_list;
-				while (l != NULL) {
-					struct mips_hi16 *next;
-					unsigned long insn;
-
-					/* The value for the HI16 had best be the same. */
-					assert(v == l->value);
-
-					/* Do the HI16 relocation.  Note that we actually don't
-					   need to know anything about the LO16 itself, except where
-					   to find the low 16 bits of the addend needed by the LO16.  */
-					insn = *l->addr;
-					val =
-					    ((insn & 0xffff) << 16) +
-					    vallo;
-					val += v;
-
-					/* Account for the sign extension that will happen in the
-					   low bits.  */
-					val =
-					    ((val >> 16) +
-					     ((val & 0x8000) !=
-					      0)) & 0xffff;
-
-					insn = (insn & ~0xffff) | val;
-					*l->addr = insn;
-
-					next = l->next;
-					free(l);
-					l = next;
-				}
-
-				ifile->mips_hi16_list = NULL;
-			}
-
-			/* Ok, we're done with the HI16 relocs.  Now deal with the LO16.  */
-			val = v + vallo;
-			insnlo = (insnlo & ~0xffff) | (val & 0xffff);
-			*loc = insnlo;
-			break;
-		}
-
-#elif defined(__powerpc__)
-
-	case R_PPC_ADDR16_HA:
-		*(unsigned short *)loc = (v + 0x8000) >> 16;
-		break;
-
-	case R_PPC_ADDR16_HI:
-		*(unsigned short *)loc = v >> 16;
-		break;
-
-	case R_PPC_ADDR16_LO:
-		*(unsigned short *)loc = v;
-		break;
-
-	case R_PPC_REL24:
-		goto bb_use_plt;
-
-	case R_PPC_REL32:
-		*loc = v - dot;
-		break;
-
-	case R_PPC_ADDR32:
-		*loc = v;
-		break;
-
-#elif defined(__sh__)
-
-	case R_SH_NONE:
-		break;
-
-	case R_SH_DIR32:
-		*loc += v;
-		break;
-
-	case R_SH_REL32:
-		*loc += v - dot;
-		break;
-		
-	case R_SH_PLT32:
-		*loc = v - dot;
-		break;
-
-	case R_SH_GLOB_DAT:
-	case R_SH_JMP_SLOT:
-		*loc = v;
-		break;
-
-	case R_SH_RELATIVE:
-		*loc = f->baseaddr + rel->r_addend;
-		break;
-
-	case R_SH_GOTPC:
-		assert(got != 0);
-		*loc = got - dot + rel->r_addend;
-		break;
-
-	case R_SH_GOT32:
-		goto bb_use_got;
-
-	case R_SH_GOTOFF:
-		assert(got != 0);
-		*loc = v - got;
-		break;
-
-#endif
-
-	default:
-        printf("Warning: unhandled reloc %d\n",(int)ELF32_R_TYPE(rel->r_info));
-		ret = obj_reloc_unhandled;
-		break;
-
-#if defined(BB_USE_PLT_ENTRIES)
-
-	  bb_use_plt:
-
-      /* find the plt entry and initialize it if necessary */
-      assert(isym != NULL);
-
-#if defined(BB_USE_PLT_LIST)
-      for (pe = isym->pltent; pe != NULL && pe->addend != rel->r_addend;)
-	pe = pe->next;
-      assert(pe != NULL);
-#else
-      pe = &isym->pltent;
-#endif
-
-      if (! pe->inited) {
-	  	ip = (unsigned long *) (ifile->plt->contents + pe->offset);
-
-		/* generate some machine code */
-
-#if defined(__arm__)
-	  	ip[0] = 0xe51ff004;			/* ldr pc,[pc,#-4] */
-	  	ip[1] = v;				/* sym@ */
-#endif
-#if defined(__powerpc__)
-	  ip[0] = 0x3d600000 + ((v + 0x8000) >> 16);  /* lis r11,sym@ha */
-	  ip[1] = 0x396b0000 + (v & 0xffff);	      /* addi r11,r11,sym@l */
-	  ip[2] = 0x7d6903a6;			      /* mtctr r11 */
-	  ip[3] = 0x4e800420;			      /* bctr */
-#endif
-	  	pe->inited = 1;
-	  }
-
-      /* relative distance to target */
-      v -= dot;
-      /* if the target is too far away.... */
-      if ((int)v < -0x02000000 || (int)v >= 0x02000000) {
-	    /* go via the plt */
-	    v = plt + pe->offset - dot;
-	  }
-      if (v & 3)
-	    ret = obj_reloc_dangerous;
-
-      /* merge the offset into the instruction. */
-#if defined(__arm__)
-      /* Convert to words. */
-      v >>= 2;
-
-      *loc = (*loc & ~0x00ffffff) | ((v + *loc) & 0x00ffffff);
-#endif
-#if defined(__powerpc__)
-      *loc = (*loc & ~0x03fffffc) | (v & 0x03fffffc);
-#endif
-      break;
-#endif /* BB_USE_PLT_ENTRIES */
-
-#if defined(BB_USE_GOT_ENTRIES)
-	  bb_use_got:
-
-		assert(isym != NULL);
-        /* needs an entry in the .got: set it, once */
-		if (!isym->gotent.inited) {
-			isym->gotent.inited = 1;
-			*(ElfW(Addr) *) (ifile->got->contents + isym->gotent.offset) = v;
-		}
-        /* make the reloc with_respect_to_.got */
-#if defined(__sh__)
-		*loc += isym->gotent.offset + rel->r_addend;
-#elif defined(__i386__) || defined(__arm__) || defined(__mc68000__)
-		*loc += isym->gotent.offset;
-#elif defined(__x86_64__)
-		/* XXX are these really correct?  */
-		if (ELF64_R_TYPE(rel->r_info) == R_X86_64_GOTPCREL)
-		  *(unsigned int *) loc += v + isym->gotent.offset;
-		else
-		  *loc += isym->gotent.offset;
-#endif
-		break;
-
-#endif /* BB_USE_GOT_ENTRIES */
-	}
-
-	return ret;
-}
-
-#if defined(BB_USE_LIST) 
-
-static int arch_list_add(ElfW(RelM) *rel, struct arch_list_entry **list,
-			  int offset, int size)
-{
-	struct arch_list_entry *pe;
-
-	for (pe = *list; pe != NULL; pe = pe->next) {
-		if (pe->addend == rel->r_addend) {
-			break;
-		}
-	}
-
-	if (pe == NULL) {
-		pe = xmalloc(sizeof(struct arch_list_entry));
-		pe->next = *list;
-		pe->addend = rel->r_addend;
-		pe->offset = offset;
-		pe->inited = 0;
-		*list = pe;
-		return size;
-	}
-	return 0;
-}
-
-#endif
-
-#if defined(BB_USE_SINGLE) 
-
-static int arch_single_init(ElfW(RelM) *rel, struct arch_single_entry *single,
-			     int offset, int size)
-{
-	if (single->allocated == 0) {
-		single->allocated = 1;
-		single->offset = offset;
-		single->inited = 0;
-		return size;
-	}
-	return 0;
-}
-
-#endif
-
-#if defined(BB_USE_GOT_ENTRIES) || defined(BB_USE_PLT_ENTRIES)
-
-static struct obj_section *arch_xsect_init(struct obj_file *f, char *name, 
-					   int offset, int size)
-{
-	struct obj_section *myrelsec = obj_find_section(f, name);
-
-	if (offset == 0) {
-		offset += size;
-	}
-
-	if (myrelsec) {
-		obj_extend_section(myrelsec, offset);
-	} else {
-		myrelsec = obj_create_alloced_section(f, name, 
-						      size, offset);
-		assert(myrelsec);
-	}
-
-	return myrelsec;
-}
-
-#endif
-
-static void arch_create_got(struct obj_file *f)
-{
-#if defined(BB_USE_GOT_ENTRIES) || defined(BB_USE_PLT_ENTRIES)
-	struct arch_file *ifile = (struct arch_file *) f;
-	int i;
-#if defined(BB_USE_GOT_ENTRIES)
-	int got_offset = 0, got_needed = 0, got_allocate;
-#endif
-#if defined(BB_USE_PLT_ENTRIES)
-	int plt_offset = 0, plt_needed = 0, plt_allocate;
-#endif
-    struct obj_section *relsec, *symsec, *strsec;
-	ElfW(RelM) *rel, *relend;
-	ElfW(Sym) *symtab, *extsym;
-	const char *strtab, *name;
-	struct arch_symbol *intsym;
-
-	for (i = 0; i < f->header.e_shnum; ++i) {
-		relsec = f->sections[i];
-
-		if (relsec->header.sh_type != SHT_RELM)
-			continue;
-
-		symsec = f->sections[relsec->header.sh_link];
-		strsec = f->sections[symsec->header.sh_link];
-
-		rel = (ElfW(RelM) *) relsec->contents;
-		relend = rel + (relsec->header.sh_size / sizeof(ElfW(RelM)));
-		symtab = (ElfW(Sym) *) symsec->contents;
-		strtab = (const char *) strsec->contents;
-
-		for (; rel < relend; ++rel) {
-			extsym = &symtab[ELF32_R_SYM(rel->r_info)];
-			
-#if defined(BB_USE_GOT_ENTRIES)
-			got_allocate = 0;
-#endif
-#if defined(BB_USE_PLT_ENTRIES)
-			plt_allocate = 0;
-#endif
-
-			switch (ELF32_R_TYPE(rel->r_info)) {
-
-#if defined(__arm__)
-
-			case R_ARM_PC24:
-			case R_ARM_PLT32:
-				plt_allocate = 1;
-				break;
-
-			case R_ARM_GOTOFF:
-			case R_ARM_GOTPC:
-				got_needed = 1;
-				continue;
-
-			case R_ARM_GOT32:
-				got_allocate = 1;
-				break;
-
-#elif defined(__i386__)
-
-			case R_386_GOTPC:
-			case R_386_GOTOFF:
-				got_needed = 1;
-				continue;
-
-			case R_386_GOT32:
-				got_allocate = 1;
-				break;
-
-#elif defined(__x86_64__)
-
-			case R_X86_64_GOTPCREL:
-			case R_X86_64_GOT32:
-			  got_needed = 1;
-			  continue;
-			  
-#elif defined(__powerpc__)
-
-			case R_PPC_REL24:
-				plt_allocate = 1;
-				break;
-
-#elif defined(__mc68000__)
-
-			case R_68K_GOT32:
-				got_allocate = 1;
-				break;
-
-			case R_68K_GOTOFF:
-				got_needed = 1;
-				continue;
-
-#elif defined(__sh__)
-
-			case R_SH_GOT32:
-				got_allocate = 1; 
-				break;
-
-			case R_SH_GOTPC:
-			case R_SH_GOTOFF:
-				got_needed = 1;
-				continue;
-
-#endif
-			default:
-				continue;
-			}
-
-			if (extsym->st_name != 0) {
-				name = strtab + extsym->st_name;
-			} else {
-				name = f->sections[extsym->st_shndx]->name;
-			}
-			intsym = (struct arch_symbol *) obj_find_symbol(f, name);
-#if defined(BB_USE_GOT_ENTRIES)
-			if (got_allocate) {
-				got_offset += arch_single_init(
-					rel, &intsym->gotent, 
-					got_offset, BB_GOT_ENTRY_SIZE);
-
-				got_needed = 1;
-			}
-#endif
-#if defined(BB_USE_PLT_ENTRIES)
-			if (plt_allocate) {
-#if defined(BB_USE_PLT_LIST) 
-				plt_offset += arch_list_add(
-					rel, &intsym->pltent, 
-					plt_offset, BB_PLT_ENTRY_SIZE);
-#else
-				plt_offset += arch_single_init(
-					rel, &intsym->pltent, 
-					plt_offset, BB_PLT_ENTRY_SIZE);
-#endif
-				plt_needed = 1;
-			}
-#endif
-		}
-	}
-
-#if defined(BB_USE_GOT_ENTRIES)
-	if (got_needed) {
-		ifile->got = arch_xsect_init(f, ".got", got_offset,
-					    BB_GOT_ENTRY_SIZE);
-	}
-#endif
-
-#if defined(BB_USE_PLT_ENTRIES)
-	if (plt_needed) {
-		ifile->plt = arch_xsect_init(f, ".plt", plt_offset,
-					    BB_PLT_ENTRY_SIZE);
-	}
-#endif
-
-#endif /* defined(BB_USE_GOT_ENTRIES) || defined(BB_USE_PLT_ENTRIES) */
-}
-
-#ifdef BB_FEATURE_NEW_MODULE_INTERFACE
-static int arch_init_module(struct obj_file *f, struct new_module *mod)
-{
-	return 1;
-}
-#endif
-
-
-/*======================================================================*/
-
-/* Standard ELF hash function.  */
-static inline unsigned long obj_elf_hash_n(const char *name, unsigned long n)
-{
-	unsigned long h = 0;
-	unsigned long g;
-	unsigned char ch;
-
-	while (n > 0) {
-		ch = *name++;
-		h = (h << 4) + ch;
-		if ((g = (h & 0xf0000000)) != 0) {
-			h ^= g >> 24;
-			h &= ~g;
-		}
-		n--;
-	}
-	return h;
-}
-
-static unsigned long obj_elf_hash(const char *name)
-{
-	return obj_elf_hash_n(name, strlen(name));
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-/* String comparison for non-co-versioned kernel and module.  */
-
-static int ncv_strcmp(const char *a, const char *b)
-{
-	size_t alen = strlen(a), blen = strlen(b);
-
-	if (blen == alen + 10 && b[alen] == '_' && b[alen + 1] == 'R')
-		return strncmp(a, b, alen);
-	else if (alen == blen + 10 && a[blen] == '_' && a[blen + 1] == 'R')
-		return strncmp(a, b, blen);
-	else
-		return strcmp(a, b);
-}
-
-/* String hashing for non-co-versioned kernel and module.  Here
-   we are simply forced to drop the crc from the hash.  */
-
-static unsigned long ncv_symbol_hash(const char *str)
-{
-	size_t len = strlen(str);
-	if (len > 10 && str[len - 10] == '_' && str[len - 9] == 'R')
-		len -= 10;
-	return obj_elf_hash_n(str, len);
-}
-
-static void
-obj_set_symbol_compare(struct obj_file *f,
-					   int (*cmp) (const char *, const char *),
-					   unsigned long (*hash) (const char *))
-{
-	if (cmp)
-		f->symbol_cmp = cmp;
-	if (hash) {
-		struct obj_symbol *tmptab[HASH_BUCKETS], *sym, *next;
-		int i;
-
-		f->symbol_hash = hash;
-
-		memcpy(tmptab, f->symtab, sizeof(tmptab));
-		memset(f->symtab, 0, sizeof(f->symtab));
-
-		for (i = 0; i < HASH_BUCKETS; ++i)
-			for (sym = tmptab[i]; sym; sym = next) {
-				unsigned long h = hash(sym->name) % HASH_BUCKETS;
-				next = sym->next;
-				sym->next = f->symtab[h];
-				f->symtab[h] = sym;
-			}
-	}
-}
-
-#endif							/* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-static struct obj_symbol *
-obj_add_symbol(struct obj_file *f, const char *name,
-								  unsigned long symidx, int info,
-								  int secidx, ElfW(Addr) value,
-								  unsigned long size)
-{
-	struct obj_symbol *sym;
-	unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-	int n_type = ELFW(ST_TYPE) (info);
-	int n_binding = ELFW(ST_BIND) (info);
-
-	for (sym = f->symtab[hash]; sym; sym = sym->next)
-		if (f->symbol_cmp(sym->name, name) == 0) {
-			int o_secidx = sym->secidx;
-			int o_info = sym->info;
-			int o_type = ELFW(ST_TYPE) (o_info);
-			int o_binding = ELFW(ST_BIND) (o_info);
-
-			/* A redefinition!  Is it legal?  */
-
-			if (secidx == SHN_UNDEF)
-				return sym;
-			else if (o_secidx == SHN_UNDEF)
-				goto found;
-			else if (n_binding == STB_GLOBAL && o_binding == STB_LOCAL) {
-				/* Cope with local and global symbols of the same name
-				   in the same object file, as might have been created
-				   by ld -r.  The only reason locals are now seen at this
-				   level at all is so that we can do semi-sensible things
-				   with parameters.  */
-
-				struct obj_symbol *nsym, **p;
-
-				nsym = arch_new_symbol();
-				nsym->next = sym->next;
-				nsym->ksymidx = -1;
-
-				/* Excise the old (local) symbol from the hash chain.  */
-				for (p = &f->symtab[hash]; *p != sym; p = &(*p)->next)
-					continue;
-				*p = sym = nsym;
-				goto found;
-			} else if (n_binding == STB_LOCAL) {
-				/* Another symbol of the same name has already been defined.
-				   Just add this to the local table.  */
-				sym = arch_new_symbol();
-				sym->next = NULL;
-				sym->ksymidx = -1;
-				f->local_symtab[symidx] = sym;
-				goto found;
-			} else if (n_binding == STB_WEAK)
-				return sym;
-			else if (o_binding == STB_WEAK)
-				goto found;
-			/* Don't unify COMMON symbols with object types the programmer
-			   doesn't expect.  */
-			else if (secidx == SHN_COMMON
-					 && (o_type == STT_NOTYPE || o_type == STT_OBJECT))
-				return sym;
-			else if (o_secidx == SHN_COMMON
-					 && (n_type == STT_NOTYPE || n_type == STT_OBJECT))
-				goto found;
-			else {
-				/* Don't report an error if the symbol is coming from
-				   the kernel or some external module.  */
-				if (secidx <= SHN_HIRESERVE)
-					error_msg("%s multiply defined", name);
-				return sym;
-			}
-		}
-
-	/* Completely new symbol.  */
-	sym = arch_new_symbol();
-	sym->next = f->symtab[hash];
-	f->symtab[hash] = sym;
-	sym->ksymidx = -1;
-
-	if (ELFW(ST_BIND)(info) == STB_LOCAL && symidx != -1) {
-		if (symidx >= f->local_symtab_size)
-			error_msg("local symbol %s with index %ld exceeds local_symtab_size %ld",
-					name, (long) symidx, (long) f->local_symtab_size);
-		else
-			f->local_symtab[symidx] = sym;
-	}
-
-  found:
-	sym->name = name;
-	sym->value = value;
-	sym->size = size;
-	sym->secidx = secidx;
-	sym->info = info;
-
-	return sym;
-}
-
-static struct obj_symbol *
-obj_find_symbol(struct obj_file *f, const char *name)
-{
-	struct obj_symbol *sym;
-	unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-
-	for (sym = f->symtab[hash]; sym; sym = sym->next)
-		if (f->symbol_cmp(sym->name, name) == 0)
-			return sym;
-
-	return NULL;
-}
-
-static ElfW(Addr)
-	obj_symbol_final_value(struct obj_file * f, struct obj_symbol * sym)
-{
-	if (sym) {
-		if (sym->secidx >= SHN_LORESERVE)
-			return sym->value;
-
-		return sym->value + f->sections[sym->secidx]->header.sh_addr;
-	} else {
-		/* As a special case, a NULL sym has value zero.  */
-		return 0;
-	}
-}
-
-static struct obj_section *obj_find_section(struct obj_file *f, const char *name)
-{
-	int i, n = f->header.e_shnum;
-
-	for (i = 0; i < n; ++i)
-		if (strcmp(f->sections[i]->name, name) == 0)
-			return f->sections[i];
-
-	return NULL;
-}
-
-static int obj_load_order_prio(struct obj_section *a)
-{
-	unsigned long af, ac;
-
-	af = a->header.sh_flags;
-
-	ac = 0;
-	if (a->name[0] != '.' || strlen(a->name) != 10 ||
-		strcmp(a->name + 5, ".init"))
-		ac |= 32;
-	if (af & SHF_ALLOC)
-		ac |= 16;
-	if (!(af & SHF_WRITE))
-		ac |= 8;
-	if (af & SHF_EXECINSTR)
-		ac |= 4;
-	if (a->header.sh_type != SHT_NOBITS)
-		ac |= 2;
-
-	return ac;
-}
-
-static void
-obj_insert_section_load_order(struct obj_file *f, struct obj_section *sec)
-{
-	struct obj_section **p;
-	int prio = obj_load_order_prio(sec);
-	for (p = f->load_order_search_start; *p; p = &(*p)->load_next)
-		if (obj_load_order_prio(*p) < prio)
-			break;
-	sec->load_next = *p;
-	*p = sec;
-}
-
-static struct obj_section *obj_create_alloced_section(struct obj_file *f,
-											   const char *name,
-											   unsigned long align,
-											   unsigned long size)
-{
-	int newidx = f->header.e_shnum++;
-	struct obj_section *sec;
-
-	f->sections = xrealloc(f->sections, (newidx + 1) * sizeof(sec));
-	f->sections[newidx] = sec = arch_new_section();
-
-	memset(sec, 0, sizeof(*sec));
-	sec->header.sh_type = SHT_PROGBITS;
-	sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
-	sec->header.sh_size = size;
-	sec->header.sh_addralign = align;
-	sec->name = name;
-	sec->idx = newidx;
-	if (size)
-		sec->contents = xmalloc(size);
-
-	obj_insert_section_load_order(f, sec);
-
-	return sec;
-}
-
-static struct obj_section *obj_create_alloced_section_first(struct obj_file *f,
-													 const char *name,
-													 unsigned long align,
-													 unsigned long size)
-{
-	int newidx = f->header.e_shnum++;
-	struct obj_section *sec;
-
-	f->sections = xrealloc(f->sections, (newidx + 1) * sizeof(sec));
-	f->sections[newidx] = sec = arch_new_section();
-
-	memset(sec, 0, sizeof(*sec));
-	sec->header.sh_type = SHT_PROGBITS;
-	sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
-	sec->header.sh_size = size;
-	sec->header.sh_addralign = align;
-	sec->name = name;
-	sec->idx = newidx;
-	if (size)
-		sec->contents = xmalloc(size);
-
-	sec->load_next = f->load_order;
-	f->load_order = sec;
-	if (f->load_order_search_start == &f->load_order)
-		f->load_order_search_start = &sec->load_next;
-
-	return sec;
-}
-
-static void *obj_extend_section(struct obj_section *sec, unsigned long more)
-{
-	unsigned long oldsize = sec->header.sh_size;
-	if (more) { 
-		sec->contents = xrealloc(sec->contents, sec->header.sh_size += more);
-	}
-	return sec->contents + oldsize;
-}
-
-
-/* Conditionally add the symbols from the given symbol set to the
-   new module.  */
-
-static int
-add_symbols_from(
-				 struct obj_file *f,
-				 int idx, struct new_module_symbol *syms, size_t nsyms)
-{
-	struct new_module_symbol *s;
-	size_t i;
-	int used = 0;
-
-	for (i = 0, s = syms; i < nsyms; ++i, ++s) {
-
-		/* Only add symbols that are already marked external.  If we
-		   override locals we may cause problems for argument initialization.
-		   We will also create a false dependency on the module.  */
-		struct obj_symbol *sym;
-
-		sym = obj_find_symbol(f, (char *) s->name);
-		if (sym && !ELFW(ST_BIND) (sym->info) == STB_LOCAL) {
-			sym = obj_add_symbol(f, (char *) s->name, -1,
-								 ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-								 idx, s->value, 0);
-			/* Did our symbol just get installed?  If so, mark the
-			   module as "used".  */
-			if (sym->secidx == idx)
-				used = 1;
-		}
-	}
-
-	return used;
-}
-
-static void add_kernel_symbols(struct obj_file *f)
-{
-	struct external_module *m;
-	int i, nused = 0;
-
-	/* Add module symbols first.  */
-
-	for (i = 0, m = ext_modules; i < n_ext_modules; ++i, ++m)
-		if (m->nsyms
-			&& add_symbols_from(f, SHN_HIRESERVE + 2 + i, m->syms,
-								m->nsyms)) m->used = 1, ++nused;
-
-	n_ext_modules_used = nused;
-
-	/* And finally the symbols from the kernel proper.  */
-
-	if (nksyms)
-		add_symbols_from(f, SHN_HIRESERVE + 1, ksyms, nksyms);
-}
-
-static char *get_modinfo_value(struct obj_file *f, const char *key)
-{
-	struct obj_section *sec;
-	char *p, *v, *n, *ep;
-	size_t klen = strlen(key);
-
-	sec = obj_find_section(f, ".modinfo");
-	if (sec == NULL)
-		return NULL;
-	p = sec->contents;
-	ep = p + sec->header.sh_size;
-	while (p < ep) {
-		v = strchr(p, '=');
-		n = strchr(p, '\0');
-		if (v) {
-			if (p + klen == v && strncmp(p, key, klen) == 0)
-				return v + 1;
-		} else {
-			if (p + klen == n && strcmp(p, key) == 0)
-				return n;
-		}
-		p = n + 1;
-	}
-
-	return NULL;
-}
-
-
-/*======================================================================*/
-/* Functions relating to module loading in pre 2.1 kernels.  */
-
-static int
-old_process_module_arguments(struct obj_file *f, int argc, char **argv)
-{
-	while (argc > 0) {
-		char *p, *q;
-		struct obj_symbol *sym;
-		int *loc;
-
-		p = *argv;
-		if ((q = strchr(p, '=')) == NULL) {
-			argc--;
-			continue;
-                }
-		*q++ = '\0';
-
-		sym = obj_find_symbol(f, p);
-
-		/* Also check that the parameter was not resolved from the kernel.  */
-		if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
-			error_msg("symbol for parameter %s not found", p);
-			return 0;
-		}
-
-		loc = (int *) (f->sections[sym->secidx]->contents + sym->value);
-
-		/* Do C quoting if we begin with a ".  */
-		if (*q == '"') {
-			char *r, *str;
-
-			str = alloca(strlen(q));
-			for (r = str, q++; *q != '"'; ++q, ++r) {
-				if (*q == '\0') {
-					error_msg("improperly terminated string argument for %s", p);
-					return 0;
-				} else if (*q == '\\')
-					switch (*++q) {
-					case 'a':
-						*r = '\a';
-						break;
-					case 'b':
-						*r = '\b';
-						break;
-					case 'e':
-						*r = '\033';
-						break;
-					case 'f':
-						*r = '\f';
-						break;
-					case 'n':
-						*r = '\n';
-						break;
-					case 'r':
-						*r = '\r';
-						break;
-					case 't':
-						*r = '\t';
-						break;
-
-					case '0':
-					case '1':
-					case '2':
-					case '3':
-					case '4':
-					case '5':
-					case '6':
-					case '7':
-						{
-							int c = *q - '0';
-							if (q[1] >= '0' && q[1] <= '7') {
-								c = (c * 8) + *++q - '0';
-								if (q[1] >= '0' && q[1] <= '7')
-									c = (c * 8) + *++q - '0';
-							}
-							*r = c;
-						}
-						break;
-
-					default:
-						*r = *q;
-						break;
-				} else
-					*r = *q;
-			}
-			*r = '\0';
-			obj_string_patch(f, sym->secidx, sym->value, str);
-		} else if (*q >= '0' && *q <= '9') {
-			do
-				*loc++ = strtoul(q, &q, 0);
-			while (*q++ == ',');
-		} else {
-			char *contents = f->sections[sym->secidx]->contents;
-			char *myloc = contents + sym->value;
-			char *r;			/* To search for commas */
-
-			/* Break the string with comas */
-			while ((r = strchr(q, ',')) != (char *) NULL) {
-				*r++ = '\0';
-				obj_string_patch(f, sym->secidx, myloc - contents, q);
-				myloc += sizeof(char *);
-				q = r;
-			}
-
-			/* last part */
-			obj_string_patch(f, sym->secidx, myloc - contents, q);
-		}
-
-		argc--, argv++;
-	}
-
-	return 1;
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-static int old_is_module_checksummed(struct obj_file *f)
-{
-	return obj_find_symbol(f, "Using_Versions") != NULL;
-}
-/* Get the module's kernel version in the canonical integer form.  */
-
-static int
-old_get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
-	struct obj_symbol *sym;
-	char *p, *q;
-	int a, b, c;
-
-	sym = obj_find_symbol(f, "kernel_version");
-	if (sym == NULL)
-		return -1;
-
-	p = f->sections[sym->secidx]->contents + sym->value;
-	safe_strncpy(str, p, STRVERSIONLEN);
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-
-	return a << 16 | b << 8 | c;
-}
-
-#endif   /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-#ifdef BB_FEATURE_OLD_MODULE_INTERFACE
-
-/* Fetch all the symbols and divvy them up as appropriate for the modules.  */
-
-static int old_get_kernel_symbols(const char *m_name)
-{
-	struct old_kernel_sym *ks, *k;
-	struct new_module_symbol *s;
-	struct external_module *mod;
-	int nks, nms, nmod, i;
-
-	nks = get_kernel_syms(NULL);
-	if (nks <= 0) {
-		if (nks)
-			perror_msg("get_kernel_syms: %s", m_name);
-		else
-			error_msg("No kernel symbols");
-		return 0;
-	}
-
-	ks = k = xmalloc(nks * sizeof(*ks));
-
-	if (get_kernel_syms(ks) != nks) {
-		perror("inconsistency with get_kernel_syms -- is someone else "
-			   "playing with modules?");
-		free(ks);
-		return 0;
-	}
-
-	/* Collect the module information.  */
-
-	mod = NULL;
-	nmod = -1;
-
-	while (k->name[0] == '#' && k->name[1]) {
-		struct old_kernel_sym *k2;
-
-		/* Find out how many symbols this module has.  */
-		for (k2 = k + 1; k2->name[0] != '#'; ++k2)
-			continue;
-		nms = k2 - k - 1;
-
-		mod = xrealloc(mod, (++nmod + 1) * sizeof(*mod));
-		mod[nmod].name = k->name + 1;
-		mod[nmod].addr = k->value;
-		mod[nmod].used = 0;
-		mod[nmod].nsyms = nms;
-		mod[nmod].syms = s = (nms ? xmalloc(nms * sizeof(*s)) : NULL);
-
-		for (i = 0, ++k; i < nms; ++i, ++s, ++k) {
-			s->name = (unsigned long) k->name;
-			s->value = k->value;
-		}
-
-		k = k2;
-	}
-
-	ext_modules = mod;
-	n_ext_modules = nmod + 1;
-
-	/* Now collect the symbols for the kernel proper.  */
-
-	if (k->name[0] == '#')
-		++k;
-
-	nksyms = nms = nks - (k - ks);
-	ksyms = s = (nms ? xmalloc(nms * sizeof(*s)) : NULL);
-
-	for (i = 0; i < nms; ++i, ++s, ++k) {
-		s->name = (unsigned long) k->name;
-		s->value = k->value;
-	}
-
-	return 1;
-}
-
-/* Return the kernel symbol checksum version, or zero if not used.  */
-
-static int old_is_kernel_checksummed(void)
-{
-	/* Using_Versions is the first symbol.  */
-	if (nksyms > 0
-		&& strcmp((char *) ksyms[0].name,
-				  "Using_Versions") == 0) return ksyms[0].value;
-	else
-		return 0;
-}
-
-
-static int old_create_mod_use_count(struct obj_file *f)
-{
-	struct obj_section *sec;
-
-	sec = obj_create_alloced_section_first(f, ".moduse", sizeof(long),
-										   sizeof(long));
-
-	obj_add_symbol(f, "mod_use_count_", -1,
-				   ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT), sec->idx, 0,
-				   sizeof(long));
-
-	return 1;
-}
-
-static int
-old_init_module(const char *m_name, struct obj_file *f,
-				unsigned long m_size)
-{
-	char *image;
-	struct old_mod_routines routines;
-	struct old_symbol_table *symtab;
-	int ret;
-
-	/* Create the symbol table */
-	{
-		int nsyms = 0, strsize = 0, total;
-
-		/* Size things first... */
-		if (flag_export) {
-			int i;
-			for (i = 0; i < HASH_BUCKETS; ++i) {
-				struct obj_symbol *sym;
-				for (sym = f->symtab[i]; sym; sym = sym->next)
-					if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
-						&& sym->secidx <= SHN_HIRESERVE) 
-					{
-						sym->ksymidx = nsyms++;
-						strsize += strlen(sym->name) + 1;
-					}
-			}
-		}
-
-		total = (sizeof(struct old_symbol_table)
-				 + nsyms * sizeof(struct old_module_symbol)
-				 + n_ext_modules_used * sizeof(struct old_module_ref)
-				 + strsize);
-		symtab = xmalloc(total);
-		symtab->size = total;
-		symtab->n_symbols = nsyms;
-		symtab->n_refs = n_ext_modules_used;
-
-		if (flag_export && nsyms) {
-			struct old_module_symbol *ksym;
-			char *str;
-			int i;
-
-			ksym = symtab->symbol;
-			str = ((char *) ksym + nsyms * sizeof(struct old_module_symbol)
-				   + n_ext_modules_used * sizeof(struct old_module_ref));
-
-			for (i = 0; i < HASH_BUCKETS; ++i) {
-				struct obj_symbol *sym;
-				for (sym = f->symtab[i]; sym; sym = sym->next)
-					if (sym->ksymidx >= 0) {
-						ksym->addr = obj_symbol_final_value(f, sym);
-						ksym->name =
-							(unsigned long) str - (unsigned long) symtab;
-
-						strcpy(str, sym->name);
-						str += strlen(sym->name) + 1;
-						ksym++;
-					}
-			}
-		}
-
-		if (n_ext_modules_used) {
-			struct old_module_ref *ref;
-			int i;
-
-			ref = (struct old_module_ref *)
-				((char *) symtab->symbol + nsyms * sizeof(struct old_module_symbol));
-
-			for (i = 0; i < n_ext_modules; ++i)
-				if (ext_modules[i].used)
-					ref++->module = ext_modules[i].addr;
-		}
-	}
-
-	/* Fill in routines.  */
-
-	routines.init =
-		obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
-	routines.cleanup =
-		obj_symbol_final_value(f, obj_find_symbol(f, "cleanup_module"));
-
-	/* Whew!  All of the initialization is complete.  Collect the final
-	   module image and give it to the kernel.  */
-
-	image = xmalloc(m_size);
-	obj_create_image(f, image);
-
-	/* image holds the complete relocated module, accounting correctly for
-	   mod_use_count.  However the old module kernel support assume that
-	   it is receiving something which does not contain mod_use_count.  */
-	ret = old_sys_init_module(m_name, image + sizeof(long),
-							  m_size | (flag_autoclean ? OLD_MOD_AUTOCLEAN
-										: 0), &routines, symtab);
-	if (ret)
-		perror_msg("init_module: %s", m_name);
-
-	free(image);
-	free(symtab);
-
-	return ret == 0;
-}
-
-#else
-
-#define old_create_mod_use_count(x) TRUE
-#define old_init_module(x, y, z) TRUE
-
-#endif							/* BB_FEATURE_OLD_MODULE_INTERFACE */
-
-
-
-/*======================================================================*/
-/* Functions relating to module loading after 2.1.18.  */
-
-static int
-new_process_module_arguments(struct obj_file *f, int argc, char **argv)
-{
-	while (argc > 0) {
-		char *p, *q, *key;
-		struct obj_symbol *sym;
-		char *contents, *loc;
-		int min, max, n;
-
-		p = *argv;
-		if ((q = strchr(p, '=')) == NULL) {
-			argc--;
-			continue;
-                }
-
-		key = alloca(q - p + 6);
-		memcpy(key, "parm_", 5);
-		memcpy(key + 5, p, q - p);
-		key[q - p + 5] = 0;
-
-		p = get_modinfo_value(f, key);
-		key += 5;
-		if (p == NULL) {
-			error_msg("invalid parameter %s", key);
-			return 0;
-		}
-
-		sym = obj_find_symbol(f, key);
-
-		/* Also check that the parameter was not resolved from the kernel.  */
-		if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
-			error_msg("symbol for parameter %s not found", key);
-			return 0;
-		}
-
-		if (isdigit(*p)) {
-			min = strtoul(p, &p, 10);
-			if (*p == '-')
-				max = strtoul(p + 1, &p, 10);
-			else
-				max = min;
-		} else
-			min = max = 1;
-
-		contents = f->sections[sym->secidx]->contents;
-		loc = contents + sym->value;
-		n = (*++q != '\0');
-
-		while (1) {
-			if ((*p == 's') || (*p == 'c')) {
-				char *str;
-
-				/* Do C quoting if we begin with a ", else slurp the lot.  */
-				if (*q == '"') {
-					char *r;
-
-					str = alloca(strlen(q));
-					for (r = str, q++; *q != '"'; ++q, ++r) {
-						if (*q == '\0') {
-							error_msg("improperly terminated string argument for %s",
-									key);
-							return 0;
-						} else if (*q == '\\')
-							switch (*++q) {
-							case 'a':
-								*r = '\a';
-								break;
-							case 'b':
-								*r = '\b';
-								break;
-							case 'e':
-								*r = '\033';
-								break;
-							case 'f':
-								*r = '\f';
-								break;
-							case 'n':
-								*r = '\n';
-								break;
-							case 'r':
-								*r = '\r';
-								break;
-							case 't':
-								*r = '\t';
-								break;
-
-							case '0':
-							case '1':
-							case '2':
-							case '3':
-							case '4':
-							case '5':
-							case '6':
-							case '7':
-								{
-									int c = *q - '0';
-									if (q[1] >= '0' && q[1] <= '7') {
-										c = (c * 8) + *++q - '0';
-										if (q[1] >= '0' && q[1] <= '7')
-											c = (c * 8) + *++q - '0';
-									}
-									*r = c;
-								}
-								break;
-
-							default:
-								*r = *q;
-								break;
-						} else
-							*r = *q;
-					}
-					*r = '\0';
-					++q;
-				} else {
-					char *r;
-
-					/* In this case, the string is not quoted. We will break
-					   it using the coma (like for ints). If the user wants to
-					   include comas in a string, he just has to quote it */
-
-					/* Search the next coma */
-					r = strchr(q, ',');
-
-					/* Found ? */
-					if (r != (char *) NULL) {
-						/* Recopy the current field */
-						str = alloca(r - q + 1);
-						memcpy(str, q, r - q);
-
-						/* I don't know if it is usefull, as the previous case
-						   doesn't null terminate the string ??? */
-						str[r - q] = '\0';
-
-						/* Keep next fields */
-						q = r;
-					} else {
-						/* last string */
-						str = q;
-						q = "";
-					}
-				}
-
-				if (*p == 's') {
-					/* Normal string */
-					obj_string_patch(f, sym->secidx, loc - contents, str);
-					loc += tgt_sizeof_char_p;
-				} else {
-					/* Array of chars (in fact, matrix !) */
-					unsigned long charssize;	/* size of each member */
-
-					/* Get the size of each member */
-					/* Probably we should do that outside the loop ? */
-					if (!isdigit(*(p + 1))) {
-						error_msg("parameter type 'c' for %s must be followed by"
-								" the maximum size", key);
-						return 0;
-					}
-					charssize = strtoul(p + 1, (char **) NULL, 10);
-
-					/* Check length */
-					if (strlen(str) >= charssize) {
-						error_msg("string too long for %s (max %ld)", key,
-								charssize - 1);
-						return 0;
-					}
-
-					/* Copy to location */
-					strcpy((char *) loc, str);
-					loc += charssize;
-				}
-			} else {
-				long v = strtoul(q, &q, 0);
-				switch (*p) {
-				case 'b':
-					*loc++ = v;
-					break;
-				case 'h':
-					*(short *) loc = v;
-					loc += tgt_sizeof_short;
-					break;
-				case 'i':
-					*(int *) loc = v;
-					loc += tgt_sizeof_int;
-					break;
-				case 'l':
-					*(long *) loc = v;
-					loc += tgt_sizeof_long;
-					break;
-
-				default:
-					error_msg("unknown parameter type '%c' for %s", *p, key);
-					return 0;
-				}
-			}
-
-		  retry_end_of_value:
-			switch (*q) {
-			case '\0':
-				goto end_of_arg;
-
-			case ' ':
-			case '\t':
-			case '\n':
-			case '\r':
-				++q;
-				goto retry_end_of_value;
-
-			case ',':
-				if (++n > max) {
-					error_msg("too many values for %s (max %d)", key, max);
-					return 0;
-				}
-				++q;
-				break;
-
-			default:
-				error_msg("invalid argument syntax for %s", key);
-				return 0;
-			}
-		}
-
-	  end_of_arg:
-		if (n < min) {
-			error_msg("too few values for %s (min %d)", key, min);
-			return 0;
-		}
-
-		argc--, argv++;
-	}
-
-	return 1;
-}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-static int new_is_module_checksummed(struct obj_file *f)
-{
-	const char *p = get_modinfo_value(f, "using_checksums");
-	if (p)
-		return atoi(p);
-	else
-		return 0;
-}
-
-/* Get the module's kernel version in the canonical integer form.  */
-
-static int
-new_get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
-	char *p, *q;
-	int a, b, c;
-
-	p = get_modinfo_value(f, "kernel_version");
-	if (p == NULL)
-		return -1;
-	safe_strncpy(str, p, STRVERSIONLEN);
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-
-	return a << 16 | b << 8 | c;
-}
-
-#endif   /* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-
-#ifdef BB_FEATURE_NEW_MODULE_INTERFACE
-
-/* Fetch the loaded modules, and all currently exported symbols.  */
-
-static int new_get_kernel_symbols(void)
-{
-	char *module_names, *mn;
-	struct external_module *modules, *m;
-	struct new_module_symbol *syms, *s;
-	size_t ret, bufsize, nmod, nsyms, i, j;
-
-	/* Collect the loaded modules.  */
-
-	module_names = xmalloc(bufsize = 256);
-  retry_modules_load:
-	if (query_module(NULL, QM_MODULES, module_names, bufsize, &ret)) {
-		if (errno == ENOSPC && bufsize < ret) {
-			module_names = xrealloc(module_names, bufsize = ret);
-			goto retry_modules_load;
-		}
-		perror_msg("QM_MODULES");
-		return 0;
-	}
-
-	n_ext_modules = nmod = ret;
-
-	/* Collect the modules' symbols.  */
-
-	if (nmod){
-		ext_modules = modules = xmalloc(nmod * sizeof(*modules));
-		memset(modules, 0, nmod * sizeof(*modules));
-		for (i = 0, mn = module_names, m = modules;
-			 i < nmod; ++i, ++m, mn += strlen(mn) + 1) {
-			struct new_module_info info;
-	
-			if (query_module(mn, QM_INFO, &info, sizeof(info), &ret)) {
-				if (errno == ENOENT) {
-					/* The module was removed out from underneath us.  */
-					continue;
-				}
-				perror_msg("query_module: QM_INFO: %s", mn);
-				return 0;
-			}
-	
-			syms = xmalloc(bufsize = 1024);
-		  retry_mod_sym_load:
-			if (query_module(mn, QM_SYMBOLS, syms, bufsize, &ret)) {
-				switch (errno) {
-				case ENOSPC:
-					syms = xrealloc(syms, bufsize = ret);
-					goto retry_mod_sym_load;
-				case ENOENT:
-					/* The module was removed out from underneath us.  */
-					continue;
-				default:
-					perror_msg("query_module: QM_SYMBOLS: %s", mn);
-					return 0;
-				}
-			}
-			nsyms = ret;
-	
-			m->name = mn;
-			m->addr = info.addr;
-			m->nsyms = nsyms;
-			m->syms = syms;
-	
-			for (j = 0, s = syms; j < nsyms; ++j, ++s) {
-				s->name += (unsigned long) syms;
-			}
-		}
-	}
-
-	/* Collect the kernel's symbols.  */
-
-	syms = xmalloc(bufsize = 16 * 1024);
-  retry_kern_sym_load:
-	if (query_module(NULL, QM_SYMBOLS, syms, bufsize, &ret)) {
-		if (errno == ENOSPC && bufsize < ret) {
-			syms = xrealloc(syms, bufsize = ret);
-			goto retry_kern_sym_load;
-		}
-		perror_msg("kernel: QM_SYMBOLS");
-		return 0;
-	}
-	nksyms = nsyms = ret;
-	ksyms = syms;
-
-	for (j = 0, s = syms; j < nsyms; ++j, ++s) {
-		s->name += (unsigned long) syms;
-	}
-	return 1;
-}
-
-
-/* Return the kernel symbol checksum version, or zero if not used.  */
-
-static int new_is_kernel_checksummed(void)
-{
-	struct new_module_symbol *s;
-	size_t i;
-
-	/* Using_Versions is not the first symbol, but it should be in there.  */
-
-	for (i = 0, s = ksyms; i < nksyms; ++i, ++s)
-		if (strcmp((char *) s->name, "Using_Versions") == 0)
-			return s->value;
-
-	return 0;
-}
-
-
-static int new_create_this_module(struct obj_file *f, const char *m_name)
-{
-	struct obj_section *sec;
-
-	sec = obj_create_alloced_section_first(f, ".this", tgt_sizeof_long,
-										   sizeof(struct new_module));
-	memset(sec->contents, 0, sizeof(struct new_module));
-
-	obj_add_symbol(f, "__this_module", -1,
-				   ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT), sec->idx, 0,
-				   sizeof(struct new_module));
-
-	obj_string_patch(f, sec->idx, offsetof(struct new_module, name),
-					 m_name);
-
-	return 1;
-}
-
-
-static int new_create_module_ksymtab(struct obj_file *f)
-{
-	struct obj_section *sec;
-	int i;
-
-	/* We must always add the module references.  */
-
-	if (n_ext_modules_used) {
-		struct new_module_ref *dep;
-		struct obj_symbol *tm;
-
-		sec = obj_create_alloced_section(f, ".kmodtab", tgt_sizeof_void_p,
-										 (sizeof(struct new_module_ref)
-										  * n_ext_modules_used));
-		if (!sec)
-			return 0;
-
-		tm = obj_find_symbol(f, "__this_module");
-		dep = (struct new_module_ref *) sec->contents;
-		for (i = 0; i < n_ext_modules; ++i)
-			if (ext_modules[i].used) {
-				dep->dep = ext_modules[i].addr;
-				obj_symbol_patch(f, sec->idx,
-								 (char *) &dep->ref - sec->contents, tm);
-				dep->next_ref = 0;
-				++dep;
-			}
-	}
-
-	if (flag_export && !obj_find_section(f, "__ksymtab")) {
-		size_t nsyms;
-		int *loaded;
-
-		sec =
-			obj_create_alloced_section(f, "__ksymtab", tgt_sizeof_void_p,
-									   0);
-
-		/* We don't want to export symbols residing in sections that
-		   aren't loaded.  There are a number of these created so that
-		   we make sure certain module options don't appear twice.  */
-
-		loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
-		while (--i >= 0)
-			loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
-		for (nsyms = i = 0; i < HASH_BUCKETS; ++i) {
-			struct obj_symbol *sym;
-			for (sym = f->symtab[i]; sym; sym = sym->next)
-				if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
-					&& sym->secidx <= SHN_HIRESERVE
-					&& (sym->secidx >= SHN_LORESERVE
-						|| loaded[sym->secidx])) {
-					ElfW(Addr) ofs = nsyms * 2 * tgt_sizeof_void_p;
-
-					obj_symbol_patch(f, sec->idx, ofs, sym);
-					obj_string_patch(f, sec->idx, ofs + tgt_sizeof_void_p,
-									 sym->name);
-
-					nsyms++;
-				}
-		}
-
-		obj_extend_section(sec, nsyms * 2 * tgt_sizeof_char_p);
-	}
-
-	return 1;
-}
-
-
-static int
-new_init_module(const char *m_name, struct obj_file *f,
-				unsigned long m_size)
-{
-	struct new_module *module;
-	struct obj_section *sec;
-	void *image;
-	int ret;
-	tgt_long m_addr;
-
-	sec = obj_find_section(f, ".this");
-	if (!sec || !sec->contents) { 
-		perror_msg("corrupt module %s?",m_name);
-		exit(EXIT_FAILURE);
-	}
-	module = (struct new_module *) sec->contents;
-	m_addr = sec->header.sh_addr;
-
-	module->size_of_struct = sizeof(*module);
-	module->size = m_size;
-	module->flags = flag_autoclean ? NEW_MOD_AUTOCLEAN : 0;
-
-	sec = obj_find_section(f, "__ksymtab");
-	if (sec && sec->header.sh_size) {
-		module->syms = sec->header.sh_addr;
-		module->nsyms = sec->header.sh_size / (2 * tgt_sizeof_char_p);
-	}
-
-	if (n_ext_modules_used) {
-		sec = obj_find_section(f, ".kmodtab");
-		module->deps = sec->header.sh_addr;
-		module->ndeps = n_ext_modules_used;
-	}
-
-	module->init =
-		obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
-	module->cleanup =
-		obj_symbol_final_value(f, obj_find_symbol(f, "cleanup_module"));
-
-	sec = obj_find_section(f, "__ex_table");
-	if (sec) {
-		module->ex_table_start = sec->header.sh_addr;
-		module->ex_table_end = sec->header.sh_addr + sec->header.sh_size;
-	}
-
-	sec = obj_find_section(f, ".text.init");
-	if (sec) {
-		module->runsize = sec->header.sh_addr - m_addr;
-	}
-	sec = obj_find_section(f, ".data.init");
-	if (sec) {
-		if (!module->runsize ||
-			module->runsize > sec->header.sh_addr - m_addr)
-				module->runsize = sec->header.sh_addr - m_addr;
-	}
-	sec = obj_find_section(f, ARCHDATA_SEC_NAME);
-	if (sec && sec->header.sh_size) {
-		module->archdata_start = (void*)sec->header.sh_addr;
-		module->archdata_end = module->archdata_start + sec->header.sh_size;
-	}
-	sec = obj_find_section(f, KALLSYMS_SEC_NAME);
-	if (sec && sec->header.sh_size) {
-		module->kallsyms_start = (void*)sec->header.sh_addr;
-		module->kallsyms_end = module->kallsyms_start + sec->header.sh_size;
-	}
-
-	if (!arch_init_module(f, module))
-		return 0;
-
-	/* Whew!  All of the initialization is complete.  Collect the final
-	   module image and give it to the kernel.  */
-
-	image = xmalloc(m_size);
-	obj_create_image(f, image);
-
-	ret = new_sys_init_module(m_name, (struct new_module *) image);
-	if (ret)
-		perror_msg("init_module: %s", m_name);
-
-	free(image);
-
-	return ret == 0;
-}
-
-#else
-
-#define new_init_module(x, y, z) TRUE
-#define new_create_this_module(x, y) 0
-#define new_create_module_ksymtab(x)
-#define query_module(v, w, x, y, z) -1
-
-#endif							/* BB_FEATURE_NEW_MODULE_INTERFACE */
-
-
-/*======================================================================*/
-
-static int
-obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-				 const char *string)
-{
-	struct obj_string_patch *p;
-	struct obj_section *strsec;
-	size_t len = strlen(string) + 1;
-	char *loc;
-
-	p = xmalloc(sizeof(*p));
-	p->next = f->string_patches;
-	p->reloc_secidx = secidx;
-	p->reloc_offset = offset;
-	f->string_patches = p;
-
-	strsec = obj_find_section(f, ".kstrtab");
-	if (strsec == NULL) {
-		strsec = obj_create_alloced_section(f, ".kstrtab", 1, len);
-		p->string_offset = 0;
-		loc = strsec->contents;
-	} else {
-		p->string_offset = strsec->header.sh_size;
-		loc = obj_extend_section(strsec, len);
-	}
-	memcpy(loc, string, len);
-
-	return 1;
-}
-
-#ifdef BB_FEATURE_NEW_MODULE_INTERFACE
-static int
-obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-				 struct obj_symbol *sym)
-{
-	struct obj_symbol_patch *p;
-
-	p = xmalloc(sizeof(*p));
-	p->next = f->symbol_patches;
-	p->reloc_secidx = secidx;
-	p->reloc_offset = offset;
-	p->sym = sym;
-	f->symbol_patches = p;
-
-	return 1;
-}
-#endif
-
-static int obj_check_undefineds(struct obj_file *f)
-{
-	unsigned long i;
-	int ret = 1;
-
-	for (i = 0; i < HASH_BUCKETS; ++i) {
-		struct obj_symbol *sym;
-		for (sym = f->symtab[i]; sym; sym = sym->next)
-			if (sym->secidx == SHN_UNDEF) {
-				if (ELFW(ST_BIND) (sym->info) == STB_WEAK) {
-					sym->secidx = SHN_ABS;
-					sym->value = 0;
-				} else {
-					if (!flag_quiet) {
-						error_msg("unresolved symbol %s", sym->name);
-					}
-					ret = 0;
-				}
-			}
-	}
-
-	return ret;
-}
-
-static void obj_allocate_commons(struct obj_file *f)
-{
-	struct common_entry {
-		struct common_entry *next;
-		struct obj_symbol *sym;
-	} *common_head = NULL;
-
-	unsigned long i;
-
-	for (i = 0; i < HASH_BUCKETS; ++i) {
-		struct obj_symbol *sym;
-		for (sym = f->symtab[i]; sym; sym = sym->next)
-			if (sym->secidx == SHN_COMMON) {
-				/* Collect all COMMON symbols and sort them by size so as to
-				   minimize space wasted by alignment requirements.  */
-				{
-					struct common_entry **p, *n;
-					for (p = &common_head; *p; p = &(*p)->next)
-						if (sym->size <= (*p)->sym->size)
-							break;
-
-					n = alloca(sizeof(*n));
-					n->next = *p;
-					n->sym = sym;
-					*p = n;
-				}
-			}
-	}
-
-	for (i = 1; i < f->local_symtab_size; ++i) {
-		struct obj_symbol *sym = f->local_symtab[i];
-		if (sym && sym->secidx == SHN_COMMON) {
-			struct common_entry **p, *n;
-			for (p = &common_head; *p; p = &(*p)->next)
-				if (sym == (*p)->sym)
-					break;
-				else if (sym->size < (*p)->sym->size) {
-					n = alloca(sizeof(*n));
-					n->next = *p;
-					n->sym = sym;
-					*p = n;
-					break;
-				}
-		}
-	}
-
-	if (common_head) {
-		/* Find the bss section.  */
-		for (i = 0; i < f->header.e_shnum; ++i)
-			if (f->sections[i]->header.sh_type == SHT_NOBITS)
-				break;
-
-		/* If for some reason there hadn't been one, create one.  */
-		if (i == f->header.e_shnum) {
-			struct obj_section *sec;
-
-			f->sections = xrealloc(f->sections, (i + 1) * sizeof(sec));
-			f->sections[i] = sec = arch_new_section();
-			f->header.e_shnum = i + 1;
-
-			memset(sec, 0, sizeof(*sec));
-			sec->header.sh_type = SHT_PROGBITS;
-			sec->header.sh_flags = SHF_WRITE | SHF_ALLOC;
-			sec->name = ".bss";
-			sec->idx = i;
-		}
-
-		/* Allocate the COMMONS.  */
-		{
-			ElfW(Addr) bss_size = f->sections[i]->header.sh_size;
-			ElfW(Addr) max_align = f->sections[i]->header.sh_addralign;
-			struct common_entry *c;
-
-			for (c = common_head; c; c = c->next) {
-				ElfW(Addr) align = c->sym->value;
-
-				if (align > max_align)
-					max_align = align;
-				if (bss_size & (align - 1))
-					bss_size = (bss_size | (align - 1)) + 1;
-
-				c->sym->secidx = i;
-				c->sym->value = bss_size;
-
-				bss_size += c->sym->size;
-			}
-
-			f->sections[i]->header.sh_size = bss_size;
-			f->sections[i]->header.sh_addralign = max_align;
-		}
-	}
-
-	/* For the sake of patch relocation and parameter initialization,
-	   allocate zeroed data for NOBITS sections now.  Note that after
-	   this we cannot assume NOBITS are really empty.  */
-	for (i = 0; i < f->header.e_shnum; ++i) {
-		struct obj_section *s = f->sections[i];
-		if (s->header.sh_type == SHT_NOBITS) {
-			if (s->header.sh_size != 0)
-			s->contents = memset(xmalloc(s->header.sh_size),
-								 0, s->header.sh_size);
-			else
-				s->contents = NULL;
-
-			s->header.sh_type = SHT_PROGBITS;
-		}
-	}
-}
-
-static unsigned long obj_load_size(struct obj_file *f)
-{
-	unsigned long dot = 0;
-	struct obj_section *sec;
-
-	/* Finalize the positions of the sections relative to one another.  */
-
-	for (sec = f->load_order; sec; sec = sec->load_next) {
-		ElfW(Addr) align;
-
-		align = sec->header.sh_addralign;
-		if (align && (dot & (align - 1)))
-			dot = (dot | (align - 1)) + 1;
-
-		sec->header.sh_addr = dot;
-		dot += sec->header.sh_size;
-	}
-
-	return dot;
-}
-
-static int obj_relocate(struct obj_file *f, ElfW(Addr) base)
-{
-	int i, n = f->header.e_shnum;
-	int ret = 1;
-
-	/* Finalize the addresses of the sections.  */
-
-	f->baseaddr = base;
-	for (i = 0; i < n; ++i)
-		f->sections[i]->header.sh_addr += base;
-
-	/* And iterate over all of the relocations.  */
-
-	for (i = 0; i < n; ++i) {
-		struct obj_section *relsec, *symsec, *targsec, *strsec;
-		ElfW(RelM) * rel, *relend;
-		ElfW(Sym) * symtab;
-		const char *strtab;
-
-		relsec = f->sections[i];
-		if (relsec->header.sh_type != SHT_RELM)
-			continue;
-
-		symsec = f->sections[relsec->header.sh_link];
-		targsec = f->sections[relsec->header.sh_info];
-		strsec = f->sections[symsec->header.sh_link];
-
-		rel = (ElfW(RelM) *) relsec->contents;
-		relend = rel + (relsec->header.sh_size / sizeof(ElfW(RelM)));
-		symtab = (ElfW(Sym) *) symsec->contents;
-		strtab = (const char *) strsec->contents;
-
-		for (; rel < relend; ++rel) {
-			ElfW(Addr) value = 0;
-			struct obj_symbol *intsym = NULL;
-			unsigned long symndx;
-			ElfW(Sym) * extsym = 0;
-			const char *errmsg;
-
-			/* Attempt to find a value to use for this relocation.  */
-
-			symndx = ELFW(R_SYM) (rel->r_info);
-			if (symndx) {
-				/* Note we've already checked for undefined symbols.  */
-
-				extsym = &symtab[symndx];
-				if (ELFW(ST_BIND) (extsym->st_info) == STB_LOCAL) {
-					/* Local symbols we look up in the local table to be sure
-					   we get the one that is really intended.  */
-					intsym = f->local_symtab[symndx];
-				} else {
-					/* Others we look up in the hash table.  */
-					const char *name;
-					if (extsym->st_name)
-						name = strtab + extsym->st_name;
-					else
-						name = f->sections[extsym->st_shndx]->name;
-					intsym = obj_find_symbol(f, name);
-				}
-
-				value = obj_symbol_final_value(f, intsym);
-				intsym->referenced = 1;
-			}
-#if SHT_RELM == SHT_RELA
-#if defined(__alpha__) && defined(AXP_BROKEN_GAS)
-			/* Work around a nasty GAS bug, that is fixed as of 2.7.0.9.  */
-			if (!extsym || !extsym->st_name ||
-				ELFW(ST_BIND) (extsym->st_info) != STB_LOCAL)
-#endif
-				value += rel->r_addend;
-#endif
-
-			/* Do it! */
-			switch (arch_apply_relocation
-					(f, targsec, symsec, intsym, rel, value)) {
-			case obj_reloc_ok:
-				break;
-
-			case obj_reloc_overflow:
-				errmsg = "Relocation overflow";
-				goto bad_reloc;
-			case obj_reloc_dangerous:
-				errmsg = "Dangerous relocation";
-				goto bad_reloc;
-			case obj_reloc_unhandled:
-				errmsg = "Unhandled relocation";
-			  bad_reloc:
-				if (extsym) {
-					error_msg("%s of type %ld for %s", errmsg,
-							(long) ELFW(R_TYPE) (rel->r_info),
-							strtab + extsym->st_name);
-				} else {
-					error_msg("%s of type %ld", errmsg,
-							(long) ELFW(R_TYPE) (rel->r_info));
-				}
-				ret = 0;
-				break;
-			}
-		}
-	}
-
-	/* Finally, take care of the patches.  */
-
-	if (f->string_patches) {
-		struct obj_string_patch *p;
-		struct obj_section *strsec;
-		ElfW(Addr) strsec_base;
-		strsec = obj_find_section(f, ".kstrtab");
-		strsec_base = strsec->header.sh_addr;
-
-		for (p = f->string_patches; p; p = p->next) {
-			struct obj_section *targsec = f->sections[p->reloc_secidx];
-			*(ElfW(Addr) *) (targsec->contents + p->reloc_offset)
-				= strsec_base + p->string_offset;
-		}
-	}
-
-	if (f->symbol_patches) {
-		struct obj_symbol_patch *p;
-
-		for (p = f->symbol_patches; p; p = p->next) {
-			struct obj_section *targsec = f->sections[p->reloc_secidx];
-			*(ElfW(Addr) *) (targsec->contents + p->reloc_offset)
-				= obj_symbol_final_value(f, p->sym);
-		}
-	}
-
-	return ret;
-}
-
-static int obj_create_image(struct obj_file *f, char *image)
-{
-	struct obj_section *sec;
-	ElfW(Addr) base = f->baseaddr;
-
-	for (sec = f->load_order; sec; sec = sec->load_next) {
-		char *secimg;
-
-		if (sec->contents == 0 || sec->header.sh_size == 0)
-			continue;
-
-		secimg = image + (sec->header.sh_addr - base);
-
-		/* Note that we allocated data for NOBITS sections earlier.  */
-		memcpy(secimg, sec->contents, sec->header.sh_size);
-	}
-
-	return 1;
-}
-
-/*======================================================================*/
-
-static struct obj_file *obj_load(FILE * fp, int loadprogbits)
-{
-	struct obj_file *f;
-	ElfW(Shdr) * section_headers;
-	int shnum, i;
-	char *shstrtab;
-
-	/* Read the file header.  */
-
-	f = arch_new_file();
-	memset(f, 0, sizeof(*f));
-	f->symbol_cmp = strcmp;
-	f->symbol_hash = obj_elf_hash;
-	f->load_order_search_start = &f->load_order;
-
-	fseek(fp, 0, SEEK_SET);
-	if (fread(&f->header, sizeof(f->header), 1, fp) != 1) {
-		perror_msg("error reading ELF header");
-		return NULL;
-	}
-
-	if (f->header.e_ident[EI_MAG0] != ELFMAG0
-		|| f->header.e_ident[EI_MAG1] != ELFMAG1
-		|| f->header.e_ident[EI_MAG2] != ELFMAG2
-		|| f->header.e_ident[EI_MAG3] != ELFMAG3) {
-		error_msg("not an ELF file");
-		return NULL;
-	}
-	if (f->header.e_ident[EI_CLASS] != ELFCLASSM
-		|| f->header.e_ident[EI_DATA] != ELFDATAM
-		|| f->header.e_ident[EI_VERSION] != EV_CURRENT
-		|| !MATCH_MACHINE(f->header.e_machine)) {
-		error_msg("ELF file not for this architecture");
-		return NULL;
-	}
-	if (f->header.e_type != ET_REL) {
-		error_msg("ELF file not a relocatable object");
-		return NULL;
-	}
-
-	/* Read the section headers.  */
-
-	if (f->header.e_shentsize != sizeof(ElfW(Shdr))) {
-		error_msg("section header size mismatch: %lu != %lu",
-				(unsigned long) f->header.e_shentsize,
-				(unsigned long) sizeof(ElfW(Shdr)));
-		return NULL;
-	}
-
-	shnum = f->header.e_shnum;
-	f->sections = xmalloc(sizeof(struct obj_section *) * shnum);
-	memset(f->sections, 0, sizeof(struct obj_section *) * shnum);
-
-	section_headers = alloca(sizeof(ElfW(Shdr)) * shnum);
-	fseek(fp, f->header.e_shoff, SEEK_SET);
-	if (fread(section_headers, sizeof(ElfW(Shdr)), shnum, fp) != shnum) {
-		perror_msg("error reading ELF section headers");
-		return NULL;
-	}
-
-	/* Read the section data.  */
-
-	for (i = 0; i < shnum; ++i) {
-		struct obj_section *sec;
-
-		f->sections[i] = sec = arch_new_section();
-		memset(sec, 0, sizeof(*sec));
-
-		sec->header = section_headers[i];
-		sec->idx = i;
-
-		if(sec->header.sh_size) switch (sec->header.sh_type) {
-		case SHT_NULL:
-		case SHT_NOTE:
-		case SHT_NOBITS:
-			/* ignore */
-			break;
-
-		case SHT_PROGBITS:
-#if LOADBITS
-			if (!loadprogbits) {
-				sec->contents = NULL;
-				break;
-			}
-#endif			
-		case SHT_SYMTAB:
-		case SHT_STRTAB:
-		case SHT_RELM:
-			if (sec->header.sh_size > 0) {
-				sec->contents = xmalloc(sec->header.sh_size);
-				fseek(fp, sec->header.sh_offset, SEEK_SET);
-				if (fread(sec->contents, sec->header.sh_size, 1, fp) != 1) {
-					perror_msg("error reading ELF section data");
-					return NULL;
-				}
-			} else {
-				sec->contents = NULL;
-			}
-			break;
-
-#if SHT_RELM == SHT_REL
-		case SHT_RELA:
-			error_msg("RELA relocations not supported on this architecture");
-			return NULL;
-#else
-		case SHT_REL:
-			error_msg("REL relocations not supported on this architecture");
-			return NULL;
-#endif
-
-		default:
-			if (sec->header.sh_type >= SHT_LOPROC) {
-				/* Assume processor specific section types are debug
-				   info and can safely be ignored.  If this is ever not
-				   the case (Hello MIPS?), don't put ifdefs here but
-				   create an arch_load_proc_section().  */
-				break;
-			}
-
-			error_msg("can't handle sections of type %ld",
-					(long) sec->header.sh_type);
-			return NULL;
-		}
-	}
-
-	/* Do what sort of interpretation as needed by each section.  */
-
-	shstrtab = f->sections[f->header.e_shstrndx]->contents;
-
-	for (i = 0; i < shnum; ++i) {
-		struct obj_section *sec = f->sections[i];
-		sec->name = shstrtab + sec->header.sh_name;
-	}
-
-	for (i = 0; i < shnum; ++i) {
-		struct obj_section *sec = f->sections[i];
-
-		/* .modinfo should be contents only but gcc has no attribute for that.
-		 * The kernel may have marked .modinfo as ALLOC, ignore this bit.
-		 */
-		if (strcmp(sec->name, ".modinfo") == 0)
-			sec->header.sh_flags &= ~SHF_ALLOC;
-
-		if (sec->header.sh_flags & SHF_ALLOC)
-			obj_insert_section_load_order(f, sec);
-
-		switch (sec->header.sh_type) {
-		case SHT_SYMTAB:
-			{
-				unsigned long nsym, j;
-				char *strtab;
-				ElfW(Sym) * sym;
-
-				if (sec->header.sh_entsize != sizeof(ElfW(Sym))) {
-					error_msg("symbol size mismatch: %lu != %lu",
-							(unsigned long) sec->header.sh_entsize,
-							(unsigned long) sizeof(ElfW(Sym)));
-					return NULL;
-				}
-
-				nsym = sec->header.sh_size / sizeof(ElfW(Sym));
-				strtab = f->sections[sec->header.sh_link]->contents;
-				sym = (ElfW(Sym) *) sec->contents;
-
-				/* Allocate space for a table of local symbols.  */
-				j = f->local_symtab_size = sec->header.sh_info;
-				f->local_symtab = xcalloc(j, sizeof(struct obj_symbol *));
-
-				/* Insert all symbols into the hash table.  */
-				for (j = 1, ++sym; j < nsym; ++j, ++sym) {
-					const char *name;
-					if (sym->st_name)
-						name = strtab + sym->st_name;
-					else
-						name = f->sections[sym->st_shndx]->name;
-
-					obj_add_symbol(f, name, j, sym->st_info, sym->st_shndx,
-								   sym->st_value, sym->st_size);
-				}
-			}
-			break;
-
-		case SHT_RELM:
-			if (sec->header.sh_entsize != sizeof(ElfW(RelM))) {
-				error_msg("relocation entry size mismatch: %lu != %lu",
-						(unsigned long) sec->header.sh_entsize,
-						(unsigned long) sizeof(ElfW(RelM)));
-				return NULL;
-			}
-			break;
-			/* XXX  Relocation code from modutils-2.3.19 is not here.
-			 * Why?  That's about 20 lines of code from obj/obj_load.c,
-			 * which gets done in a second pass through the sections.
-			 * This BusyBox insmod does similar work in obj_relocate(). */
-		}
-	}
-
-	return f;
-}
-
-#ifdef BB_FEATURE_INSMOD_LOADINKMEM
-/*
- * load the unloaded sections directly into the memory allocated by
- * kernel for the module
- */
-
-static int obj_load_progbits(FILE * fp, struct obj_file* f, char* imagebase)
-{
-	ElfW(Addr) base = f->baseaddr;
-	struct obj_section* sec;
-	
-	for (sec = f->load_order; sec; sec = sec->load_next) {
-
-		/* section already loaded? */
-		if (sec->contents != NULL)
-			continue;
-		
-		if (sec->header.sh_size == 0)
-			continue;
-
-		sec->contents = imagebase + (sec->header.sh_addr - base);
-		fseek(fp, sec->header.sh_offset, SEEK_SET);
-		if (fread(sec->contents, sec->header.sh_size, 1, fp) != 1) {
-			error_msg("error reading ELF section data: %s\n", strerror(errno));
-			return 0;
-		}
-
-	}
-	return 1;
-}
-#endif
-
-static void hide_special_symbols(struct obj_file *f)
-{
-	static const char *const specials[] = {
-		"cleanup_module",
-		"init_module",
-		"kernel_version",
-		NULL
-	};
-
-	struct obj_symbol *sym;
-	const char *const *p;
-
-	for (p = specials; *p; ++p)
-		if ((sym = obj_find_symbol(f, *p)) != NULL)
-			sym->info =
-				ELFW(ST_INFO) (STB_LOCAL, ELFW(ST_TYPE) (sym->info));
-}
-
-#ifdef BB_FEATURE_INSMOD_CHECK_TAINTED
-static int obj_gpl_license(struct obj_file *f, const char **license)
-{
-	struct obj_section *sec;
-	/* This list must match *exactly* the list of allowable licenses in
-	 * linux/include/linux/module.h.  Checking for leading "GPL" will not
-	 * work, somebody will use "GPL sucks, this is proprietary".
-	 */
-	static const char *gpl_licenses[] = {
-		"GPL",
-		"GPL v2",
-		"GPL and additional rights",
-		"Dual BSD/GPL",
-		"Dual MPL/GPL",
-	};
-
-	if ((sec = obj_find_section(f, ".modinfo"))) {
-		const char *value, *ptr, *endptr;
-		ptr = sec->contents;
-		endptr = ptr + sec->header.sh_size;
-		while (ptr < endptr) {
-			if ((value = strchr(ptr, '=')) && strncmp(ptr, "license", value-ptr) == 0) {
-				int i;
-				if (license)
-					*license = value+1;
-				for (i = 0; i < sizeof(gpl_licenses)/sizeof(gpl_licenses[0]); ++i) {
-					if (strcmp(value+1, gpl_licenses[i]) == 0)
-						return(0);
-				}
-				return(2);
-			}
-			if (strchr(ptr, '\0'))
-				ptr = strchr(ptr, '\0') + 1;
-			else
-				ptr = endptr;
-		}
-	}
-	return(1);
-}
-
-#define TAINT_FILENAME                  "/proc/sys/kernel/tainted"
-#define TAINT_PROPRIETORY_MODULE        (1<<0)
-#define TAINT_FORCED_MODULE             (1<<1)
-#define TAINT_UNSAFE_SMP                (1<<2)
-#define TAINT_URL						"http://www.tux.org/lkml/#export-tainted"
-
-static void set_tainted(struct obj_file *f, int fd, char *m_name, 
-		int kernel_has_tainted, int taint, const char *text1, const char *text2)
-{
-	char buf[80];
-	int oldval;
-	static int first = 1;
-	if (fd < 0 && !kernel_has_tainted)
-		return;		/* New modutils on old kernel */
-	printf("Warning: loading %s will taint the kernel: %s%s\n",
-			m_name, text1, text2);
-	if (first) {
-		printf("  See %s for information about tainted modules\n", TAINT_URL);
-		first = 0;
-	}
-	if (fd >= 0) {
-		read(fd, buf, sizeof(buf)-1);
-		buf[sizeof(buf)-1] = '\0';
-		oldval = strtoul(buf, NULL, 10);
-		sprintf(buf, "%d\n", oldval | taint);
-		write(fd, buf, strlen(buf));
-	}
-}
-#endif
-
-/* Check if loading this module will taint the kernel. */
-static void check_tainted_module(struct obj_file *f, char *m_name)
-{
-#ifdef BB_FEATURE_INSMOD_CHECK_TAINTED
-	static const char tainted_file[] = TAINT_FILENAME;
-	int fd, kernel_has_tainted;
-	const char *ptr;
-
-	kernel_has_tainted = 1;
-	if ((fd = open(tainted_file, O_RDWR)) < 0) {
-		if (errno == ENOENT)
-			kernel_has_tainted = 0;
-		else if (errno == EACCES)
-			kernel_has_tainted = 1;
-		else {
-			perror(tainted_file);
-			kernel_has_tainted = 0;
-		}
-	}
-
-	switch (obj_gpl_license(f, &ptr)) {
-		case 0:
-			break;
-		case 1:
-			set_tainted(f, fd, m_name, kernel_has_tainted, TAINT_PROPRIETORY_MODULE, "no license", "");
-			break;
-		case 2:
-			/* The module has a non-GPL license so we pretend that the
-			 * kernel always has a taint flag to get a warning even on
-			 * kernels without the proc flag.
-			 */
-			set_tainted(f, fd, m_name, 1, TAINT_PROPRIETORY_MODULE, "non-GPL license - ", ptr);
-			break;
-		default:
-			set_tainted(f, fd, m_name, 1, TAINT_PROPRIETORY_MODULE, "Unexpected return from obj_gpl_license", "");
-			break;
-	}
-
-	if (flag_force_load)
-		set_tainted(f, fd, m_name, 1, TAINT_FORCED_MODULE, "forced load", "");
-
-	if (fd >= 0)
-		close(fd);
-#endif
-}
-
-void my_usage(void)
-{
-	printf("Usage.");
-	exit(0);
-}
-
-extern int insmod_main( int argc, char **argv)
-{
-	int k_crcs;
-	int k_new_syscalls;
-	int len;
-	char *tmp;
-	unsigned long m_size;
-	ElfW(Addr) m_addr;
-	FILE *fp;
-	struct obj_file *f;
-	char m_name[FILENAME_MAX] = "\0";
-	int exit_status = EXIT_FAILURE;
-	int m_has_modinfo;
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-	struct utsname uts_info;
-	char m_strversion[STRVERSIONLEN];
-	int m_version;
-	int m_crcs;
-#endif
-
-	if (argc <= 1)
-		my_usage();
-
-	argv++; argc--;
-
-	/* Grab the module name */
-	if ((tmp = strrchr(*argv, '/')) != NULL) {
-		tmp++;
-	} else {
-		tmp = *argv;
-	}
-	len = strlen(tmp);
-
-	if (len > 2 && tmp[len - 2] == '.' && tmp[len - 1] == 'o')
-		len -= 2;
-	memcpy(m_name, tmp, len);
-	strcpy(m_fullName, m_name);
-	strcat(m_fullName, ".o");
-
-	/* Get a filedesc for the module.  Check we we have a complete path */
-	if ((fp = fopen(*argv, "r")) == NULL) {
-		errorMsg("Module %s not found", *argv);
-		return -1;
-	} else
-		memcpy(m_filename, *argv, strlen(*argv));
-
-
-	if ((f = obj_load(fp, LOADBITS)) == NULL) {
-		logperror("Could not load the module");
-		goto out;
-	}
-
-	if (get_modinfo_value(f, "kernel_version") == NULL)
-		m_has_modinfo = 0;
-	else
-		m_has_modinfo = 1;
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-	/* Version correspondence?  */
-	if (!flag_quiet) {
-		if (uname(&uts_info) < 0)
-			uts_info.release[0] = '\0';
-		if (m_has_modinfo) {
-			m_version = new_get_module_version(f, m_strversion);
-		} else {
-			m_version = old_get_module_version(f, m_strversion);
-			if (m_version == -1) {
-				error_msg("couldn't find the kernel version the module was "
-						"compiled for");
-				goto out;
-			}
-		}
-
-		if (strncmp(uts_info.release, m_strversion, STRVERSIONLEN) != 0) {
-			if (flag_force_load) {
-				error_msg("Warning: kernel-module version mismatch\n"
-						"\t%s was compiled for kernel version %s\n"
-						"\twhile this kernel is version %s",
-						m_filename, m_strversion, uts_info.release);
-			} else {
-				error_msg("kernel-module version mismatch\n"
-						"\t%s was compiled for kernel version %s\n"
-						"\twhile this kernel is version %s.",
-						m_filename, m_strversion, uts_info.release);
-				goto out;
-			}
-		}
-	}
-	k_crcs = 0;
-#endif							/* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-	k_new_syscalls = !query_module(NULL, 0, NULL, 0, NULL);
-
-	if (k_new_syscalls) {
-#ifdef BB_FEATURE_NEW_MODULE_INTERFACE
-		if (!new_get_kernel_symbols())
-			goto out;
-		k_crcs = new_is_kernel_checksummed();
-#else
-		error_msg("Not configured to support new kernels");
-		goto out;
-#endif
-	} else {
-#ifdef BB_FEATURE_OLD_MODULE_INTERFACE
-		if (!old_get_kernel_symbols(m_name))
-			goto out;
-		k_crcs = old_is_kernel_checksummed();
-#else
-		error_msg("Not configured to support old kernels");
-		goto out;
-#endif
-	}
-
-#ifdef BB_FEATURE_INSMOD_VERSION_CHECKING
-	if (m_has_modinfo)
-		m_crcs = new_is_module_checksummed(f);
-	else
-		m_crcs = old_is_module_checksummed(f);
-
-	if (m_crcs != k_crcs)
-		obj_set_symbol_compare(f, ncv_strcmp, ncv_symbol_hash);
-#endif							/* BB_FEATURE_INSMOD_VERSION_CHECKING */
-
-	/* Let the module know about the kernel symbols.  */
-	add_kernel_symbols(f);
-
-	/* Allocate common symbols, symbol tables, and string tables.  */
-
-	if (k_new_syscalls 
-		? !new_create_this_module(f, m_name)
-		: !old_create_mod_use_count(f)) 
-	{
-		goto out;
-	}
-
-	if (!obj_check_undefineds(f)) {
-		goto out;
-	}
-	obj_allocate_commons(f);
-	check_tainted_module(f, m_name);
-
-	if (m_has_modinfo
-		? !new_process_module_arguments(f, argc - 1, argv + 1) 
-		: !old_process_module_arguments(f, argc - 1, argv + 1)) 
-	  {
-		goto out;
-	  }
-
-	arch_create_got(f);
-	hide_special_symbols(f);
-
-	if (k_new_syscalls)
-		new_create_module_ksymtab(f);
-
-	/* Find current size of the module */
-	m_size = obj_load_size(f);
-
-
-	m_addr = create_module(m_name, m_size);
-	if (m_addr==-1) switch (errno) {
-	case EEXIST:
-		error_msg("A module named %s already exists", m_name);
-		goto out;
-	case ENOMEM:
-		error_msg("Can't allocate kernel memory for module; needed %lu bytes",
-				m_size);
-		goto out;
-	default:
-		perror_msg("create_module: %s", m_name);
-		goto out;
-	}
-
-#if  !LOADBITS
-	/*
-	 * the PROGBITS section was not loaded by the obj_load
-	 * now we can load them directly into the kernel memory
-	 */
-	if (!obj_load_progbits(fp, f, (char*)m_addr)) {
-		delete_module(m_name);
-		goto out;
-	}
-#endif	
-
-	if (!obj_relocate(f, m_addr)) {
-		delete_module(m_name);
-		goto out;
-	}
-
-	if (k_new_syscalls 
-		? !new_init_module(m_name, f, m_size)
-		: !old_init_module(m_name, f, m_size)) 
-	{
-		delete_module(m_name);
-		goto out;
-	}
-
-	exit_status = EXIT_SUCCESS;
-
-out:
-	fclose(fp);
-	return(exit_status);
-}
-
-int insmod_call(char * full_filename, char * params)
-{
-	int argc = 2;
-	char *argv[50];
-	char * ptr = params;
-	argv[0] = "stage1";
-	argv[1] = full_filename;
-
-	while (ptr != NULL) {
-		argv[argc] = ptr;
-		argc++;
-		ptr = strchr(ptr, ' ');
-		if (ptr) {
-			ptr[0] = '\0';
-			ptr++;
-		}
-	}
-
-	return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-busybox/loop.h b/mdk-stage1/insmod-busybox/loop.h
deleted file mode 100644
index cba8c6b2b..000000000
--- a/mdk-stage1/insmod-busybox/loop.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#include <linux/posix_types.h>
-#undef dev_t
-#define dev_t __kernel_dev_t
-#include <linux/loop.h>
-#undef dev_t
diff --git a/mdk-stage1/insmod-busybox/messages.c b/mdk-stage1/insmod-busybox/messages.c
deleted file mode 100644
index 81fd9c75c..000000000
--- a/mdk-stage1/insmod-busybox/messages.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Copyright (C) 2000 by BitterSweet Enterprises, LLC.
- * Written by Karl M. Hegbloom <karlheg@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*
- *  Let's put all of these messages in one place, and link this in as
- *  a separate object module, so that there are not going to be
- *  multiple non-unique but very similar strings in the binary.
- *  Perhaps this will make it simpler to internationalize also, and
- *  may make the binary slightly smaller.
- */
-
-// To use this header file, include something like this:
-//
-//#define BB_DECLARE_EXTERN
-//#define bb_need_memory_exhausted
-//#include "messages.c"
-//
-//Then just use the string memory_exhausted when it is needed.
-//
-
-#include "busybox.h"
-#ifndef _BB_MESSAGES_C
-#define _BB_MESSAGES_C
-
-#ifdef BB_DECLARE_EXTERN
-#  define BB_DEF_MESSAGE(symbol, string_const) extern const char *symbol;
-#else
-#  define BB_DEF_MESSAGE(symbol, string_const) const char *symbol = string_const;
-#endif
-
-
-#if defined bb_need_full_version || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(full_version,
-	 "BusyBox v" BB_VER " (" BB_BT ") multi-call binary -- GPL2")
-#endif
-#if defined bb_need_name_too_long || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(name_too_long, "file name too long\n")
-#endif
-#if defined bb_need_omitting_directory || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(omitting_directory, "%s: omitting directory\n")
-#endif
-#if defined bb_need_not_a_directory || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(not_a_directory, "%s: not a directory\n")
-#endif
-#if defined bb_need_memory_exhausted || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(memory_exhausted, "memory exhausted\n")
-#endif
-#if defined bb_need_invalid_date || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(invalid_date, "invalid date `%s'\n")
-#endif
-#if defined bb_need_invalid_option || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(invalid_option, "invalid option -- %c\n")
-#endif
-#if defined bb_need_io_error || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(io_error, "%s: input/output error -- %s\n")
-#endif
-#if defined bb_need_help || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(dash_dash_help, "--help")
-#endif
-#if defined bb_need_write_error || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(write_error, "Write Error\n")
-#endif
-#if defined bb_need_too_few_args || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(too_few_args, "too few arguments\n")
-#endif
-#if defined bb_need_name_longer_then_foo || ! defined BB_DECLARE_EXTERN
-	BB_DEF_MESSAGE(name_longer_then_foo, "Names longer then %d chars not supported.\n")
-#endif
-
-
-#endif /* _BB_MESSAGES_C */
-
diff --git a/mdk-stage1/insmod-busybox/utility.c b/mdk-stage1/insmod-busybox/utility.c
deleted file mode 100644
index ffd323347..000000000
--- a/mdk-stage1/insmod-busybox/utility.c
+++ /dev/null
@@ -1,1759 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * Utility routines.
- *
- * Copyright (C) tons of folks.  Tracking down who wrote what
- * isn't something I'm going to worry about...  If you wrote something
- * here, please feel free to acknowledge your work.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Based in part on code from sash, Copyright (c) 1999 by David I. Bell 
- * Permission has been granted to redistribute this code under the GPL.
- *
- */
-
-#include "busybox.h"
-#if defined (BB_CHMOD_CHOWN_CHGRP) \
- || defined (BB_CP_MV)		   \
- || defined (BB_FIND)		   \
- || defined (BB_INSMOD)		   \
- || defined (BB_LS)		   \
- || defined (BB_RM)		   \
- || defined (BB_TAR)
-/* same conditions as recursiveAction */
-#define bb_need_name_too_long
-#endif
-#define bb_need_memory_exhausted
-#define bb_need_full_version
-#define BB_DECLARE_EXTERN
-#include "messages.c"
-
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <dirent.h>
-#include <time.h>
-#include <utime.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/ioctl.h>
-#include <sys/utsname.h>		/* for uname(2) */
-
-/* Busybox mount uses either /proc/filesystems or /dev/mtab to get the 
- * list of available filesystems used for the -t auto option */ 
-#if defined BB_FEATURE_USE_PROCFS && defined BB_FEATURE_USE_DEVPS_PATCH
-//#error Sorry, but busybox can't use both /proc and /dev/ps at the same time -- Pick one and try again.
-#error "Sorry, but busybox can't use both /proc and /dev/ps at the same time -- Pick one and try again."
-#endif
-
-
-#if defined BB_MOUNT || defined BB_UMOUNT || defined BB_DF
-#  if defined BB_MTAB
-const char mtab_file[] = "/etc/mtab";
-#  else
-#    if defined BB_FEATURE_USE_PROCFS
-const char mtab_file[] = "/proc/mounts";
-#    else
-#      if defined BB_FEATURE_USE_DEVPS_PATCH
-const char mtab_file[] = "/dev/mtab";
-#    else
-#        error With (BB_MOUNT||BB_UMOUNT||BB_DF) defined, you must define either BB_MTAB or ( BB_FEATURE_USE_PROCFS | BB_FEATURE_USE_DEVPS_PATCH)
-#    endif
-#  endif
-#  endif
-#endif
-
-#ifdef _STANDALONE_
-void errorMsg(const char *s, ...)
-{
-	va_list p;
-
-	fflush(stdout);
-	printf("busybox: ");
-	va_start(p, s);
-	vprintf(s, p);
-	va_end(p);
-	printf("\n");
-	fflush(stdout);
-}
-
-extern void logperror(char *s)
-{
-		perror(s);
-}
-
-void fatalError(const char *s, ...)
-{
-	va_list p;
-
-	fflush(stdout);
-	fprintf(stdout, "busybox: ");
-	va_start(p, s);
-	vfprintf(stdout, s, p);
-	va_end(p);
-	fprintf(stdout, "\n");
-	fflush(stdout);
-	exit(FALSE);
-}
-#else /* _STANDALONE_ */
-#include "../log.h"
-extern void errorMsg(const char *s, ...)
-{
-	va_list p;
-
-	va_start(p, s);
-	vlog_message(s, p);
-	va_end(p);
-}
-
-extern void logperror(char *s)
-{
-		log_perror(s);
-}
-
-extern void fatalError(const char *s, ...)
-{
-	va_list p;
-
-	va_start(p, s);
-	vlog_message(s, p);
-	va_end(p);
-	while (1);
-}
-#endif /* _STANDALONE_ */
-
-
-#if defined BB_INIT
-/* Returns kernel version encoded as major*65536 + minor*256 + patch,
- * so, for example,  to check if the kernel is greater than 2.2.11:
- *     if (get_kernel_revision() <= 2*65536+2*256+11) { <stuff> }
- */
-extern int get_kernel_revision(void)
-{
-	struct utsname name;
-	int major = 0, minor = 0, patch = 0;
-
-	if (uname(&name) == -1) {
-		perror("cannot get system information");
-		return (0);
-	}
-	sscanf(name.version, "%d.%d.%d", &major, &minor, &patch);
-	return major * 65536 + minor * 256 + patch;
-}
-#endif                                                 /* BB_INIT */
-
-
-
-#if defined BB_FREE || defined BB_INIT || defined BB_UNAME || defined BB_UPTIME
-_syscall1(int, sysinfo, struct sysinfo *, info);
-#endif                                                 /* BB_INIT */
-
-#if defined BB_MOUNT || defined BB_UMOUNT
-
-#ifndef __NR_umount2
-#define __NR_umount2           52
-#endif
-
-/* Include our own version of <sys/mount.h>, since libc5 doesn't
- * know about umount2 */
-extern _syscall1(int, umount, const char *, special_file);
-extern _syscall2(int, umount2, const char *, special_file, int, flags);
-extern _syscall5(int, mount, const char *, special_file, const char *, dir,
-		const char *, fstype, unsigned long int, rwflag, const void *, data);
-#endif
-
-#if defined BB_INSMOD || defined BB_LSMOD
-#ifndef __NR_query_module
-#define __NR_query_module     167
-#endif
-_syscall5(int, query_module, const char *, name, int, which,
-		void *, buf, size_t, bufsize, size_t*, ret);
-#endif
-
-
-#if defined (BB_CP_MV) || defined (BB_DU)
-
-#define HASH_SIZE	311		/* Should be prime */
-#define hash_inode(i)	((i) % HASH_SIZE)
-
-static ino_dev_hashtable_bucket_t *ino_dev_hashtable[HASH_SIZE];
-
-/*
- * Return 1 if statbuf->st_ino && statbuf->st_dev are recorded in
- * `ino_dev_hashtable', else return 0
- *
- * If NAME is a non-NULL pointer to a character pointer, and there is
- * a match, then set *NAME to the value of the name slot in that
- * bucket.
- */
-int is_in_ino_dev_hashtable(const struct stat *statbuf, char **name)
-{
-	ino_dev_hashtable_bucket_t *bucket;
-
-	bucket = ino_dev_hashtable[hash_inode(statbuf->st_ino)];
-	while (bucket != NULL) {
-	  if ((bucket->ino == statbuf->st_ino) &&
-		  (bucket->dev == statbuf->st_dev))
-	  {
-		if (name) *name = bucket->name;
-		return 1;
-	  }
-	  bucket = bucket->next;
-	}
-	return 0;
-}
-
-/* Add statbuf to statbuf hash table */
-void add_to_ino_dev_hashtable(const struct stat *statbuf, const char *name)
-{
-	int i;
-	size_t s;
-	ino_dev_hashtable_bucket_t *bucket;
-    
-	i = hash_inode(statbuf->st_ino);
-	s = name ? strlen(name) : 0;
-	bucket = xmalloc(sizeof(ino_dev_hashtable_bucket_t) + s);
-	bucket->ino = statbuf->st_ino;
-	bucket->dev = statbuf->st_dev;
-	if (name)
-		strcpy(bucket->name, name);
-	else
-		bucket->name[0] = '\0';
-	bucket->next = ino_dev_hashtable[i];
-	ino_dev_hashtable[i] = bucket;
-}
-
-/* Clear statbuf hash table */
-void reset_ino_dev_hashtable(void)
-{
-	int i;
-	ino_dev_hashtable_bucket_t *bucket;
-
-	for (i = 0; i < HASH_SIZE; i++) {
-		while (ino_dev_hashtable[i] != NULL) {
-			bucket = ino_dev_hashtable[i]->next;
-			free(ino_dev_hashtable[i]);
-			ino_dev_hashtable[i] = bucket;
-		}
-	}
-}
-
-#endif /* BB_CP_MV || BB_DU */
-
-#if defined (BB_CP_MV) || defined (BB_DU) || defined (BB_LN) || defined (BB_AR)
-/*
- * Return TRUE if a fileName is a directory.
- * Nonexistant files return FALSE.
- */
-int isDirectory(const char *fileName, const int followLinks, struct stat *statBuf)
-{
-	int status;
-	int didMalloc = 0;
-
-	if (statBuf == NULL) {
-	    statBuf = (struct stat *)xmalloc(sizeof(struct stat));
-	    ++didMalloc;
-	}
-
-	if (followLinks == TRUE)
-		status = stat(fileName, statBuf);
-	else
-		status = lstat(fileName, statBuf);
-
-	if (status < 0 || !(S_ISDIR(statBuf->st_mode))) {
-	    status = FALSE;
-	}
-	else status = TRUE;
-
-	if (didMalloc) {
-	    free(statBuf);
-	    statBuf = NULL;
-	}
-	return status;
-}
-#endif
-
-#if defined (BB_AR) || defined BB_CP_MV
-/*
- * Copy readSize bytes between two file descriptors
- */
-int copySubFile(int srcFd, int dstFd, size_t remaining)
-{
-        size_t size;
-        char buffer[BUFSIZ];
-
-        while (remaining > 0) {
-                if (remaining > BUFSIZ)
-                        size = BUFSIZ;
-                else
-                        size = remaining;
-                if (fullWrite(dstFd, buffer, fullRead(srcFd, buffer, size)) < size)
-                        return(FALSE);
-                remaining -= size;
-        }
-        return (TRUE);
-}
-#endif
-
-
-#if defined (BB_CP_MV)
-/*
- * Copy one file to another, while possibly preserving its modes, times, and
- * modes.  Returns TRUE if successful, or FALSE on a failure with an error
- * message output.  (Failure is not indicated if attributes cannot be set.)
- * -Erik Andersen
- */
-int
-copyFile(const char *srcName, const char *destName,
-		 int setModes, int followLinks, int forceFlag)
-{
-	int rfd;
-	int wfd;
-	int status;
-	struct stat srcStatBuf;
-	struct stat dstStatBuf;
-	struct utimbuf times;
-
-	if (followLinks == TRUE)
-		status = stat(srcName, &srcStatBuf);
-	else
-		status = lstat(srcName, &srcStatBuf);
-
-	if (status < 0) {
-		perror(srcName);
-		return FALSE;
-	}
-
-	if (followLinks == TRUE)
-		status = stat(destName, &dstStatBuf);
-	else
-		status = lstat(destName, &dstStatBuf);
-
-	if (status < 0 || forceFlag==TRUE) {
-		unlink(destName);
-		dstStatBuf.st_ino = -1;
-		dstStatBuf.st_dev = -1;
-	}
-
-	if ((srcStatBuf.st_dev == dstStatBuf.st_dev) &&
-		(srcStatBuf.st_ino == dstStatBuf.st_ino)) {
-		errorMsg("Copying file \"%s\" to itself\n", srcName);
-		return FALSE;
-	}
-
-	if (S_ISDIR(srcStatBuf.st_mode)) {
-		//fprintf(stderr, "copying directory %s to %s\n", srcName, destName);
-		/* Make sure the directory is writable */
-		status = mkdir(destName, 0777777 ^ umask(0));
-		if (status < 0 && errno != EEXIST) {
-			perror(destName);
-			return FALSE;
-		}
-	} else if (S_ISLNK(srcStatBuf.st_mode)) {
-		char link_val[BUFSIZ + 1];
-		int link_size;
-
-		//fprintf(stderr, "copying link %s to %s\n", srcName, destName);
-		/* Warning: This could possibly truncate silently, to BUFSIZ chars */
-		link_size = readlink(srcName, &link_val[0], BUFSIZ);
-		if (link_size < 0) {
-			perror(srcName);
-			return FALSE;
-		}
-		link_val[link_size] = '\0';
-		status = symlink(link_val, destName);
-		if (status < 0) {
-			perror(destName);
-			return FALSE;
-		}
-#if (__GLIBC__ >= 2) && (__GLIBC_MINOR__ >= 1)
-		if (setModes == TRUE) {
-			/* Try to set owner, but fail silently like GNU cp */
-			lchown(destName, srcStatBuf.st_uid, srcStatBuf.st_gid);
-		}
-#endif
-		return TRUE;
-	} else if (S_ISFIFO(srcStatBuf.st_mode)) {
-		//fprintf(stderr, "copying fifo %s to %s\n", srcName, destName);
-		if (mkfifo(destName, 0644) < 0) {
-			perror(destName);
-			return FALSE;
-		}
-	} else if (S_ISBLK(srcStatBuf.st_mode) || S_ISCHR(srcStatBuf.st_mode)
-			   || S_ISSOCK(srcStatBuf.st_mode)) {
-		//fprintf(stderr, "copying soc, blk, or chr %s to %s\n", srcName, destName);
-		if (mknod(destName, srcStatBuf.st_mode, srcStatBuf.st_rdev) < 0) {
-			perror(destName);
-			return FALSE;
-		}
-	} else if (S_ISREG(srcStatBuf.st_mode)) {
-		//fprintf(stderr, "copying regular file %s to %s\n", srcName, destName);
-		rfd = open(srcName, O_RDONLY);
-		if (rfd < 0) {
-			perror(srcName);
-			return FALSE;
-		}
-
-	 	wfd = open(destName, O_WRONLY | O_CREAT | O_TRUNC,
-				 srcStatBuf.st_mode);
-		if (wfd < 0) {
-			perror(destName);
-			close(rfd);
-			return FALSE;
-		}
-
-		if (copySubFile(rfd, wfd, srcStatBuf.st_size)==FALSE)
-			goto error_exit;	
-		
-		close(rfd);
-		if (close(wfd) < 0) {
-			return FALSE;
-		}
-	}
-
-	if (setModes == TRUE) {
-		/* This is fine, since symlinks never get here */
-		if (chown(destName, srcStatBuf.st_uid, srcStatBuf.st_gid) < 0) {
-			perror(destName);
-			exit FALSE;
-		}
-		if (chmod(destName, srcStatBuf.st_mode) < 0) {
-			perror(destName);
-			exit FALSE;
-		}
-		times.actime = srcStatBuf.st_atime;
-		times.modtime = srcStatBuf.st_mtime;
-		if (utime(destName, &times) < 0) {
-			perror(destName);
-			exit FALSE;
-		}
-	}
-
-	return TRUE;
-
-  error_exit:
-	perror(destName);
-	close(rfd);
-	close(wfd);
-
-	return FALSE;
-}
-#endif							/* BB_CP_MV */
-
-
-
-#if defined BB_TAR || defined BB_LS ||defined BB_AR
-
-#define TYPEINDEX(mode) (((mode) >> 12) & 0x0f)
-#define TYPECHAR(mode)  ("0pcCd?bB-?l?s???" [TYPEINDEX(mode)])
-
-/* The special bits. If set, display SMODE0/1 instead of MODE0/1 */
-static const mode_t SBIT[] = {
-	0, 0, S_ISUID,
-	0, 0, S_ISGID,
-	0, 0, S_ISVTX
-};
-
-/* The 9 mode bits to test */
-static const mode_t MBIT[] = {
-	S_IRUSR, S_IWUSR, S_IXUSR,
-	S_IRGRP, S_IWGRP, S_IXGRP,
-	S_IROTH, S_IWOTH, S_IXOTH
-};
-
-#define MODE1  "rwxrwxrwx"
-#define MODE0  "---------"
-#define SMODE1 "..s..s..t"
-#define SMODE0 "..S..S..T"
-
-/*
- * Return the standard ls-like mode string from a file mode.
- * This is static and so is overwritten on each call.
- */
-const char *modeString(int mode)
-{
-	static char buf[12];
-
-	int i;
-
-	buf[0] = TYPECHAR(mode);
-	for (i = 0; i < 9; i++) {
-		if (mode & SBIT[i])
-			buf[i + 1] = (mode & MBIT[i]) ? SMODE1[i] : SMODE0[i];
-		else
-			buf[i + 1] = (mode & MBIT[i]) ? MODE1[i] : MODE0[i];
-	}
-	return buf;
-}
-#endif							/* BB_TAR || BB_LS */
-
-
-#if defined BB_TAR || defined BB_AR
-/*
- * Return the standard ls-like time string from a time_t
- * This is static and so is overwritten on each call.
- */
-const char *timeString(time_t timeVal)
-{
-	time_t now;
-	char *str;
-	static char buf[26];
-
-	time(&now);
-
-	str = ctime(&timeVal);
-
-	strcpy(buf, &str[4]);
-	buf[12] = '\0';
-
-	if ((timeVal > now) || (timeVal < now - 365 * 24 * 60 * 60L)) {
-		strcpy(&buf[7], &str[20]);
-		buf[11] = '\0';
-	}
-
-	return buf;
-}
-#endif /* BB_TAR || BB_AR */
-
-#if defined BB_TAR || defined BB_CP_MV || defined BB_AR
-/*
- * Write all of the supplied buffer out to a file.
- * This does multiple writes as necessary.
- * Returns the amount written, or -1 on an error.
- */
-int fullWrite(int fd, const char *buf, int len)
-{
-	int cc;
-	int total;
-
-	total = 0;
-
-	while (len > 0) {
-		cc = write(fd, buf, len);
-
-		if (cc < 0)
-			return -1;
-
-		buf += cc;
-		total += cc;
-		len -= cc;
-	}
-
-	return total;
-}
-#endif /* BB_TAR || BB_CP_MV || BB_AR */
-
-
-#if defined BB_TAR || defined BB_TAIL || defined BB_AR || defined BB_SH || defined BB_CP_MV
-/*
- * Read all of the supplied buffer from a file.
- * This does multiple reads as necessary.
- * Returns the amount read, or -1 on an error.
- * A short read is returned on an end of file.
- */
-int fullRead(int fd, char *buf, int len)
-{
-	int cc;
-	int total;
-
-	total = 0;
-
-	while (len > 0) {
-		cc = read(fd, buf, len);
-
-		if (cc < 0)
-			return -1;
-
-		if (cc == 0)
-			break;
-
-		buf += cc;
-		total += cc;
-		len -= cc;
-	}
-
-	return total;
-}
-#endif /* BB_TAR || BB_TAIL || BB_AR || BB_SH */
-
-
-#if defined (BB_CHMOD_CHOWN_CHGRP) \
- || defined (BB_CP_MV)			\
- || defined (BB_FIND)			\
- || defined (BB_INSMOD)			\
- || defined (BB_LS)				\
- || defined (BB_RM)				\
- || defined (BB_TAR)
-
-/*
- * Walk down all the directories under the specified 
- * location, and do something (something specified
- * by the fileAction and dirAction function pointers).
- *
- * Unfortunatly, while nftw(3) could replace this and reduce 
- * code size a bit, nftw() wasn't supported before GNU libc 2.1, 
- * and so isn't sufficiently portable to take over since glibc2.1
- * is so stinking huge.
- */
-int recursiveAction(const char *fileName,
-					int recurse, int followLinks, int depthFirst,
-					int (*fileAction) (const char *fileName,
-									   struct stat * statbuf,
-									   void* userData),
-					int (*dirAction) (const char *fileName,
-									  struct stat * statbuf,
-									  void* userData),
-					void* userData)
-{
-	int status;
-	struct stat statbuf;
-	struct dirent *next;
-
-	if (followLinks == TRUE)
-		status = stat(fileName, &statbuf);
-	else
-		status = lstat(fileName, &statbuf);
-
-	if (status < 0) {
-#ifdef BB_DEBUG_PRINT_SCAFFOLD
-		fprintf(stderr,
-				"status=%d followLinks=%d TRUE=%d\n",
-				status, followLinks, TRUE);
-#endif
-		perror(fileName);
-		return FALSE;
-	}
-
-	if ((followLinks == FALSE) && (S_ISLNK(statbuf.st_mode))) {
-		if (fileAction == NULL)
-			return TRUE;
-		else
-			return fileAction(fileName, &statbuf, userData);
-	}
-
-	if (recurse == FALSE) {
-		if (S_ISDIR(statbuf.st_mode)) {
-			if (dirAction != NULL)
-				return (dirAction(fileName, &statbuf, userData));
-			else
-				return TRUE;
-		}
-	}
-
-	if (S_ISDIR(statbuf.st_mode)) {
-		DIR *dir;
-
-		dir = opendir(fileName);
-		if (!dir) {
-			perror(fileName);
-			return FALSE;
-		}
-		if (dirAction != NULL && depthFirst == FALSE) {
-			status = dirAction(fileName, &statbuf, userData);
-			if (status == FALSE) {
-				perror(fileName);
-				return FALSE;
-			}
-		}
-		while ((next = readdir(dir)) != NULL) {
-			char nextFile[BUFSIZ + 1];
-
-			if ((strcmp(next->d_name, "..") == 0)
-				|| (strcmp(next->d_name, ".") == 0)) {
-				continue;
-			}
-			if (strlen(fileName) + strlen(next->d_name) + 1 > BUFSIZ) {
-				errorMsg("name_too_long");
-				return FALSE;
-			}
-			memset(nextFile, 0, sizeof(nextFile));
-			sprintf(nextFile, "%s/%s", fileName, next->d_name);
-			status =
-				recursiveAction(nextFile, TRUE, followLinks, depthFirst,
-								fileAction, dirAction, userData);
-			if (status == FALSE) {
-				closedir(dir);
-				return FALSE;
-			}
-		}
-		status = closedir(dir);
-		if (status < 0) {
-			perror(fileName);
-			return FALSE;
-		}
-		if (dirAction != NULL && depthFirst == TRUE) {
-			status = dirAction(fileName, &statbuf, userData);
-			if (status == FALSE) {
-				perror(fileName);
-				return FALSE;
-			}
-		}
-	} else {
-		if (fileAction == NULL)
-			return TRUE;
-		else
-			return fileAction(fileName, &statbuf, userData);
-	}
-	return TRUE;
-}
-
-#endif							/* BB_CHMOD_CHOWN_CHGRP || BB_CP_MV || BB_FIND || BB_LS || BB_INSMOD */
-
-
-
-#if defined (BB_TAR) || defined (BB_MKDIR) || defined (BB_AR)
-/*
- * Attempt to create the directories along the specified path, except for
- * the final component.  The mode is given for the final directory only,
- * while all previous ones get default protections.  Errors are not reported
- * here, as failures to restore files can be reported later.
- */
-extern int createPath(const char *name, int mode)
-{
-	char *cp;
-	char *cpOld;
-	char buf[BUFSIZ + 1];
-	int retVal = 0;
-
-	strcpy(buf, name);
-	for (cp = buf; *cp == '/'; cp++);
-	cp = strchr(cp, '/');
-	while (cp) {
-		cpOld = cp;
-		cp = strchr(cp + 1, '/');
-		*cpOld = '\0';
-		retVal = mkdir(buf, cp ? 0777 : mode);
-		if (retVal != 0 && errno != EEXIST) {
-			perror(buf);
-			return FALSE;
-		}
-		*cpOld = '/';
-	}
-	return TRUE;
-}
-#endif							/* BB_TAR || BB_MKDIR */
-
-
-
-#if defined (BB_CHMOD_CHOWN_CHGRP) || defined (BB_MKDIR) \
- || defined (BB_MKFIFO) || defined (BB_MKNOD) || defined (BB_AR)
-/* [ugoa]{+|-|=}[rwxst] */
-
-
-
-extern int parse_mode(const char *s, mode_t * theMode)
-{
-	mode_t andMode =
-
-		S_ISVTX | S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
-	mode_t orMode = 0;
-	mode_t mode = 0;
-	mode_t groups = 0;
-	char type;
-	char c;
-
-	if (s==NULL)
-		return (FALSE);
-
-	do {
-		for (;;) {
-			switch (c = *s++) {
-			case '\0':
-				return -1;
-			case 'u':
-				groups |= S_ISUID | S_IRWXU;
-				continue;
-			case 'g':
-				groups |= S_ISGID | S_IRWXG;
-				continue;
-			case 'o':
-				groups |= S_IRWXO;
-				continue;
-			case 'a':
-				groups |= S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
-				continue;
-			case '+':
-			case '=':
-			case '-':
-				type = c;
-				if (groups == 0)	/* The default is "all" */
-					groups |=
-						S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO;
-				break;
-			default:
-				if (isdigit(c) && c >= '0' && c <= '7' &&
-					mode == 0 && groups == 0) {
-					*theMode = strtol(--s, NULL, 8);
-					return (TRUE);
-				} else
-					return (FALSE);
-			}
-			break;
-		}
-
-		while ((c = *s++) != '\0') {
-			switch (c) {
-			case ',':
-				break;
-			case 'r':
-				mode |= S_IRUSR | S_IRGRP | S_IROTH;
-				continue;
-			case 'w':
-				mode |= S_IWUSR | S_IWGRP | S_IWOTH;
-				continue;
-			case 'x':
-				mode |= S_IXUSR | S_IXGRP | S_IXOTH;
-				continue;
-			case 's':
-				mode |= S_IXGRP | S_ISUID | S_ISGID;
-				continue;
-			case 't':
-				mode |= 0;
-				continue;
-			default:
-				*theMode &= andMode;
-				*theMode |= orMode;
-				return (TRUE);
-			}
-			break;
-		}
-		switch (type) {
-		case '=':
-			andMode &= ~(groups);
-			/* fall through */
-		case '+':
-			orMode |= mode & groups;
-			break;
-		case '-':
-			andMode &= ~(mode & groups);
-			orMode &= andMode;
-			break;
-		}
-	} while (c == ',');
-	*theMode &= andMode;
-	*theMode |= orMode;
-	return (TRUE);
-}
-
-
-#endif
-/* BB_CHMOD_CHOWN_CHGRP || BB_MKDIR || BB_MKFIFO || BB_MKNOD */
-
-
-
-
-
-#if defined BB_CHMOD_CHOWN_CHGRP || defined BB_PS || defined BB_LS \
- || defined BB_TAR || defined BB_ID || defined BB_LOGGER \
- || defined BB_LOGNAME || defined BB_WHOAMI
-
-/* This parses entries in /etc/passwd and /etc/group.  This is desirable
- * for BusyBox, since we want to avoid using the glibc NSS stuff, which
- * increases target size and is often not needed or wanted for embedded
- * systems.
- *
- * /etc/passwd entries look like this: 
- *		root:x:0:0:root:/root:/bin/bash
- * and /etc/group entries look like this: 
- *		root:x:0:
- *
- * This uses buf as storage to hold things.
- * 
- */
-unsigned long my_getid(const char *filename, char *name, long id, long *gid)
-{
-	FILE *file;
-	char *rname, *start, *end, buf[128];
-	long rid;
-	long rgid = 0;
-
-	file = fopen(filename, "r");
-	if (file == NULL) {
-		/* Do not complain.  It is ok for /etc/passwd and
-		 * friends to be missing... */
-		return (-1);
-	}
-
-	while (fgets(buf, 128, file) != NULL) {
-		if (buf[0] == '#')
-			continue;
-
-		/* username/group name */
-		start = buf;
-		end = strchr(start, ':');
-		if (end == NULL)
-			continue;
-		*end = '\0';
-		rname = start;
-
-		/* password */
-		start = end + 1;
-		end = strchr(start, ':');
-		if (end == NULL)
-			continue;
-
-		/* uid in passwd, gid in group */
-		start = end + 1;
-		rid = (unsigned long) strtol(start, &end, 10);
-		if (end == start)
-			continue;
-
-		/* gid in passwd */
-		start = end + 1;
-		rgid = (unsigned long) strtol(start, &end, 10);
-		
-		if (name) {
-			if (0 == strcmp(rname, name)) {
-			    if (gid) *gid = rgid;
-				fclose(file);
-				return (rid);
-			}
-		}
-		if (id != -1 && id == rid) {
-			strncpy(name, rname, 8);
-			if (gid) *gid = rgid;
-			fclose(file);
-			return (TRUE);
-		}
-	}
-	fclose(file);
-	return (-1);
-}
-
-/* returns a uid given a username */
-long my_getpwnam(char *name)
-{
-	return my_getid("/etc/passwd", name, -1, NULL);
-}
-
-/* returns a gid given a group name */
-long my_getgrnam(char *name)
-{
-	return my_getid("/etc/group", name, -1, NULL);
-}
-
-/* gets a username given a uid */
-void my_getpwuid(char *name, long uid)
-{
-	my_getid("/etc/passwd", name, uid, NULL);
-}
-
-/* gets a groupname given a gid */
-void my_getgrgid(char *group, long gid)
-{
-	my_getid("/etc/group", group, gid, NULL);
-}
-
-/* gets a gid given a user name */
-long my_getpwnamegid(char *name)
-{
-	long gid;
-	my_getid("/etc/passwd", name, -1, &gid);
-	return gid;
-}
-
-#endif
- /* BB_CHMOD_CHOWN_CHGRP || BB_PS || BB_LS || BB_TAR \
- || BB_ID || BB_LOGGER || BB_LOGNAME || BB_WHOAMI */
-
-
-#if (defined BB_CHVT) || (defined BB_DEALLOCVT) || (defined BB_SETKEYCODES)
-
-/* From <linux/kd.h> */ 
-#define KDGKBTYPE       0x4B33  /* get keyboard type */
-#define         KB_84           0x01
-#define         KB_101          0x02    /* this is what we always answer */
-
-int is_a_console(int fd)
-{
-	char arg;
-
-	arg = 0;
-	return (ioctl(fd, KDGKBTYPE, &arg) == 0
-			&& ((arg == KB_101) || (arg == KB_84)));
-}
-
-static int open_a_console(char *fnam)
-{
-	int fd;
-
-	/* try read-only */
-	fd = open(fnam, O_RDWR);
-
-	/* if failed, try read-only */
-	if (fd < 0 && errno == EACCES)
-		fd = open(fnam, O_RDONLY);
-
-	/* if failed, try write-only */
-	if (fd < 0 && errno == EACCES)
-		fd = open(fnam, O_WRONLY);
-
-	/* if failed, fail */
-	if (fd < 0)
-		return -1;
-
-	/* if not a console, fail */
-	if (!is_a_console(fd)) {
-		close(fd);
-		return -1;
-	}
-
-	/* success */
-	return fd;
-}
-
-/*
- * Get an fd for use with kbd/console ioctls.
- * We try several things because opening /dev/console will fail
- * if someone else used X (which does a chown on /dev/console).
- *
- * if tty_name is non-NULL, try this one instead.
- */
-
-int get_console_fd(char *tty_name)
-{
-	int fd;
-
-	if (tty_name) {
-		if (-1 == (fd = open_a_console(tty_name)))
-			return -1;
-		else
-			return fd;
-	}
-
-	fd = open_a_console("/dev/tty");
-	if (fd >= 0)
-		return fd;
-
-	fd = open_a_console("/dev/tty0");
-	if (fd >= 0)
-		return fd;
-
-	fd = open_a_console("/dev/console");
-	if (fd >= 0)
-		return fd;
-
-	for (fd = 0; fd < 3; fd++)
-		if (is_a_console(fd))
-			return fd;
-
-	errorMsg("Couldnt get a file descriptor referring to the console\n");
-	return -1;					/* total failure */
-}
-
-
-#endif							/* BB_CHVT || BB_DEALLOCVT || BB_SETKEYCODES */
-
-
-#if defined BB_FIND || defined BB_INSMOD
-/*
- * Routine to see if a text string is matched by a wildcard pattern.
- * Returns TRUE if the text is matched, or FALSE if it is not matched
- * or if the pattern is invalid.
- *  *		matches zero or more characters
- *  ?		matches a single character
- *  [abc]	matches 'a', 'b' or 'c'
- *  \c		quotes character c
- * Adapted from code written by Ingo Wilken, and
- * then taken from sash, Copyright (c) 1999 by David I. Bell
- * Permission is granted to use, distribute, or modify this source,
- * provided that this copyright notice remains intact.
- * Permission to distribute this code under the GPL has been granted.
- */
-extern int check_wildcard_match(const char *text, const char *pattern)
-{
-	const char *retryPat;
-	const char *retryText;
-	int ch;
-	int found;
-	int len;
-
-	retryPat = NULL;
-	retryText = NULL;
-
-	while (*text || *pattern) {
-		ch = *pattern++;
-
-		switch (ch) {
-		case '*':
-			retryPat = pattern;
-			retryText = text;
-			break;
-
-		case '[':
-			found = FALSE;
-
-			while ((ch = *pattern++) != ']') {
-				if (ch == '\\')
-					ch = *pattern++;
-
-				if (ch == '\0')
-					return FALSE;
-
-				if (*text == ch)
-					found = TRUE;
-			}
-			len=strlen(text);
-			if (found == FALSE && len!=0) {
-				return FALSE;
-			}
-			if (found == TRUE) {
-				if (strlen(pattern)==0 && len==1) {
-					return TRUE;
-				}
-				if (len!=0) {
-					text++;
-					continue;
-				}
-			}
-
-			/* fall into next case */
-
-		case '?':
-			if (*text++ == '\0')
-				return FALSE;
-
-			break;
-
-		case '\\':
-			ch = *pattern++;
-
-			if (ch == '\0')
-				return FALSE;
-
-			/* fall into next case */
-
-		default:
-			if (*text == ch) {
-				if (*text)
-					text++;
-				break;
-			}
-
-			if (*text) {
-				pattern = retryPat;
-				text = ++retryText;
-				break;
-			}
-
-			return FALSE;
-		}
-
-		if (pattern == NULL)
-			return FALSE;
-	}
-
-	return TRUE;
-}
-#endif                            /* BB_FIND || BB_INSMOD */
-
-
-
-
-#if defined BB_DF || defined BB_MTAB
-/*
- * Given a block device, find the mount table entry if that block device
- * is mounted.
- *
- * Given any other file (or directory), find the mount table entry for its
- * filesystem.
- */
-extern struct mntent *findMountPoint(const char *name, const char *table)
-{
-	struct stat s;
-	dev_t mountDevice;
-	FILE *mountTable;
-	struct mntent *mountEntry;
-
-	if (stat(name, &s) != 0)
-		return 0;
-
-	if ((s.st_mode & S_IFMT) == S_IFBLK)
-		mountDevice = s.st_rdev;
-	else
-		mountDevice = s.st_dev;
-
-
-	if ((mountTable = setmntent(table, "r")) == 0)
-		return 0;
-
-	while ((mountEntry = getmntent(mountTable)) != 0) {
-		if (strcmp(name, mountEntry->mnt_dir) == 0
-			|| strcmp(name, mountEntry->mnt_fsname) == 0)	/* String match. */
-			break;
-		if (stat(mountEntry->mnt_fsname, &s) == 0 && s.st_rdev == mountDevice)	/* Match the device. */
-			break;
-		if (stat(mountEntry->mnt_dir, &s) == 0 && s.st_dev == mountDevice)	/* Match the directory's mount point. */
-			break;
-	}
-	endmntent(mountTable);
-	return mountEntry;
-}
-#endif							/* BB_DF || BB_MTAB */
-
-
-
-#if defined BB_DD || defined BB_TAIL
-/*
- * Read a number with a possible multiplier.
- * Returns -1 if the number format is illegal.
- */
-extern long getNum(const char *cp)
-{
-	long value;
-
-	if (!isDecimal(*cp))
-		return -1;
-
-	value = 0;
-
-	while (isDecimal(*cp))
-		value = value * 10 + *cp++ - '0';
-
-	switch (*cp++) {
-	case 'M':
-	case 'm':					/* `tail' uses it traditionally */
-		value *= 1048576;
-		break;
-
-	case 'k':
-		value *= 1024;
-		break;
-
-	case 'b':
-		value *= 512;
-		break;
-
-	case 'w':
-		value *= 2;
-		break;
-
-	case '\0':
-		return value;
-
-	default:
-		return -1;
-	}
-
-	if (*cp)
-		return -1;
-
-	return value;
-}
-#endif							/* BB_DD || BB_TAIL */
-
-
-#if defined BB_INIT || defined BB_SYSLOGD 
-/* try to open up the specified device */
-extern int device_open(char *device, int mode)
-{
-	int m, f, fd = -1;
-
-	m = mode | O_NONBLOCK;
-
-	/* Retry up to 5 times */
-	for (f = 0; f < 5; f++)
-		if ((fd = open(device, m, 0600)) >= 0)
-			break;
-	if (fd < 0)
-		return fd;
-	/* Reset original flags. */
-	if (m != mode)
-		fcntl(fd, F_SETFL, mode);
-	return fd;
-}
-#endif							/* BB_INIT BB_SYSLOGD */
-
-
-#if defined BB_KILLALL || ( defined BB_FEATURE_LINUXRC && ( defined BB_HALT || defined BB_REBOOT || defined BB_POWEROFF ))
-#ifdef BB_FEATURE_USE_DEVPS_PATCH
-#include <linux/devps.h> /* For Erik's nifty devps device driver */
-#endif
-
-#if defined BB_FEATURE_USE_DEVPS_PATCH
-/* findPidByName()
- *  
- *  This finds the pid of the specified process,
- *  by using the /dev/ps device driver.
- *
- *  Returns a list of all matching PIDs
- */
-extern pid_t* findPidByName( char* pidName)
-{
-	int fd, i, j;
-	char device[] = "/dev/ps";
-	pid_t num_pids;
-	pid_t* pid_array = NULL;
-	pid_t* pidList=NULL;
-
-	/* open device */ 
-	fd = open(device, O_RDONLY);
-	if (fd < 0)
-		fatalError( "open failed for `%s': %s\n", device, strerror (errno));
-
-	/* Find out how many processes there are */
-	if (ioctl (fd, DEVPS_GET_NUM_PIDS, &num_pids)<0) 
-		fatalError( "\nDEVPS_GET_PID_LIST: %s\n", strerror (errno));
-	
-	/* Allocate some memory -- grab a few extras just in case 
-	 * some new processes start up while we wait. The kernel will
-	 * just ignore any extras if we give it too many, and will trunc.
-	 * the list if we give it too few.  */
-	pid_array = (pid_t*) xcalloc( num_pids+10, sizeof(pid_t));
-	pid_array[0] = num_pids+10;
-
-	/* Now grab the pid list */
-	if (ioctl (fd, DEVPS_GET_PID_LIST, pid_array)<0) 
-		fatalError( "\nDEVPS_GET_PID_LIST: %s\n", strerror (errno));
-
-	/* Now search for a match */
-	for (i=1, j=0; i<pid_array[0] ; i++) {
-		char* p;
-		struct pid_info info;
-
-	    info.pid = pid_array[i];
-	    if (ioctl (fd, DEVPS_GET_PID_INFO, &info)<0)
-			fatalError( "\nDEVPS_GET_PID_INFO: %s\n", strerror (errno));
-
-		/* Make sure we only match on the process name */
-		p=info.command_line+1;
-		while ((*p != 0) && !isspace(*(p)) && (*(p-1) != '\\')) { 
-			(p)++;
-		}
-		if (isspace(*(p)))
-				*p='\0';
-
-		if ((strstr(info.command_line, pidName) != NULL)
-				&& (strlen(pidName) == strlen(info.command_line))) {
-			pidList=xrealloc( pidList, sizeof(pid_t) * (j+2));
-			pidList[j++]=info.pid;
-		}
-	}
-	if (pidList)
-		pidList[j]=0;
-
-	/* Free memory */
-	free( pid_array);
-
-	/* close device */
-	if (close (fd) != 0) 
-		fatalError( "close failed for `%s': %s\n",device, strerror (errno));
-
-	return pidList;
-}
-#else		/* BB_FEATURE_USE_DEVPS_PATCH */
-#if ! defined BB_FEATURE_USE_PROCFS
-#error Sorry, I depend on the /proc filesystem right now.
-#endif
-
-/* findPidByName()
- *  
- *  This finds the pid of the specified process.
- *  Currently, it's implemented by rummaging through 
- *  the proc filesystem.
- *
- *  Returns a list of all matching PIDs
- */
-extern pid_t* findPidByName( char* pidName)
-{
-	DIR *dir;
-	struct dirent *next;
-	pid_t* pidList=NULL;
-	int i=0;
-
-	dir = opendir("/proc");
-	if (!dir)
-		fatalError( "Cannot open /proc: %s\n", strerror (errno));
-	
-	while ((next = readdir(dir)) != NULL) {
-		FILE *status;
-		char filename[256];
-		char buffer[256];
-
-		/* If it isn't a number, we don't want it */
-		if (!isdigit(*next->d_name))
-			continue;
-
-		sprintf(filename, "/proc/%s/cmdline", next->d_name);
-		status = fopen(filename, "r");
-		if (!status) {
-			continue;
-		}
-		fgets(buffer, 256, status);
-		fclose(status);
-
-		if (strstr(get_last_path_component(buffer), pidName) != NULL) {
-			pidList=xrealloc( pidList, sizeof(pid_t) * (i+2));
-			pidList[i++]=strtol(next->d_name, NULL, 0);
-		}
-	}
-
-	if (pidList)
-		pidList[i]=0;
-	return pidList;
-}
-#endif							/* BB_FEATURE_USE_DEVPS_PATCH */
-#endif							/* BB_KILLALL || ( BB_FEATURE_LINUXRC && ( BB_HALT || BB_REBOOT || BB_POWEROFF )) */
-
-#ifndef DMALLOC
-/* this should really be farmed out to libbusybox.a */
-extern void *xmalloc(size_t size)
-{
-	void *ptr = malloc(size);
-
-	if (!ptr)
-		fatalError("memory_exhausted");
-	return ptr;
-}
-
-extern void *xrealloc(void *old, size_t size)
-{
-	void *ptr;
-	if (!size)
-			size = 1;
-	ptr = realloc(old, size);
-	if (!ptr)
-		fatalError("memory_exhausted");
-	return ptr;
-}
-
-extern void *xcalloc(size_t nmemb, size_t size)
-{
-	void *ptr = calloc(nmemb, size);
-	if (!ptr)
-		fatalError("memory_exhausted");
-	return ptr;
-}
-#endif
-
-#if defined BB_FEATURE_NFSMOUNT || defined BB_SH || defined BB_LS
-# ifndef DMALLOC
-extern char * xstrdup (const char *s) {
-	char *t;
-
-	if (s == NULL)
-		return NULL;
-
-	t = strdup (s);
-
-	if (t == NULL)
-		fatalError("memory_exhausted");
-
-	return t;
-}
-# endif
-#endif
-
-#if defined BB_FEATURE_NFSMOUNT
-extern char * xstrndup (const char *s, int n) {
-	char *t;
-
-	if (s == NULL)
-		fatalError("xstrndup bug");
-
-	t = xmalloc(n+1);
-	strncpy(t,s,n);
-	t[n] = 0;
-
-	return t;
-}
-#endif
-
-
-#if (__GLIBC__ < 2) && (defined BB_SYSLOGD || defined BB_INIT)
-extern int vdprintf(int d, const char *format, va_list ap)
-{
-	char buf[BUF_SIZE];
-	int len;
-
-	len = vsprintf(buf, format, ap);
-	return write(d, buf, len);
-}
-#endif							/* BB_SYSLOGD */
-
-
-#if defined BB_FEATURE_MOUNT_LOOP
-#include <fcntl.h>
-#include "loop.h" /* Pull in loop device support */
-
-extern int del_loop(const char *device)
-{
-	int fd;
-
-	if ((fd = open(device, O_RDONLY)) < 0) {
-		perror(device);
-		return (FALSE);
-	}
-	if (ioctl(fd, LOOP_CLR_FD, 0) < 0) {
-		perror("ioctl: LOOP_CLR_FD");
-		return (FALSE);
-	}
-	close(fd);
-	return (TRUE);
-}
-
-extern int set_loop(const char *device, const char *file, int offset,
-					int *loopro)
-{
-	struct loop_info loopinfo;
-	int fd, ffd, mode;
-
-	mode = *loopro ? O_RDONLY : O_RDWR;
-	if ((ffd = open(file, mode)) < 0 && !*loopro
-		&& (errno != EROFS || (ffd = open(file, mode = O_RDONLY)) < 0)) {
-		perror(file);
-		return 1;
-	}
-	if ((fd = open(device, mode)) < 0) {
-		close(ffd);
-		perror(device);
-		return 1;
-	}
-	*loopro = (mode == O_RDONLY);
-
-	memset(&loopinfo, 0, sizeof(loopinfo));
-	strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
-	loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
-
-	loopinfo.lo_offset = offset;
-
-	loopinfo.lo_encrypt_key_size = 0;
-	if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
-		perror("ioctl: LOOP_SET_FD");
-		close(fd);
-		close(ffd);
-		return 1;
-	}
-	if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
-		(void) ioctl(fd, LOOP_CLR_FD, 0);
-		perror("ioctl: LOOP_SET_STATUS");
-		close(fd);
-		close(ffd);
-		return 1;
-	}
-	close(fd);
-	close(ffd);
-	return 0;
-}
-
-extern char *find_unused_loop_device(void)
-{
-	char dev[20];
-	int i, fd;
-	struct stat statbuf;
-	struct loop_info loopinfo;
-
-	for (i = 0; i <= 7; i++) {
-		sprintf(dev, "/dev/loop%d", i);
-		if (stat(dev, &statbuf) == 0 && S_ISBLK(statbuf.st_mode)) {
-			if ((fd = open(dev, O_RDONLY)) >= 0) {
-				if (ioctl(fd, LOOP_GET_STATUS, &loopinfo) == -1) {
-					if (errno == ENXIO) {	/* probably free */
-						close(fd);
-						return strdup(dev);
-					}
-				}
-				close(fd);
-			}
-		}
-	}
-	return NULL;
-}
-#endif							/* BB_FEATURE_MOUNT_LOOP */
-
-#if defined BB_MOUNT || defined BB_DF || ( defined BB_UMOUNT && ! defined BB_MTAB)
-extern int find_real_root_device_name(char* name)
-{
-	DIR *dir;
-	struct dirent *entry;
-	struct stat statBuf, rootStat;
-	char fileName[BUFSIZ];
-
-	if (stat("/", &rootStat) != 0) {
-		errorMsg("could not stat '/'\n");
-		return( FALSE);
-	}
-
-	dir = opendir("/dev");
-	if (!dir) {
-		errorMsg("could not open '/dev'\n");
-		return( FALSE);
-	}
-
-	while((entry = readdir(dir)) != NULL) {
-
-		/* Must skip ".." since that is "/", and so we 
-		 * would get a false positive on ".."  */
-		if (strcmp(entry->d_name, "..") == 0)
-			continue;
-
-		snprintf( fileName, strlen(name)+1, "/dev/%s", entry->d_name);
-
-		if (stat(fileName, &statBuf) != 0)
-			continue;
-		/* Some char devices have the same dev_t as block
-		 * devices, so make sure this is a block device */
-		if (! S_ISBLK(statBuf.st_mode))
-			continue;
-		if (statBuf.st_rdev == rootStat.st_rdev) {
-			strcpy(name, fileName); 
-			return ( TRUE);
-		}
-	}
-
-	return( FALSE);
-}
-#endif
-
-
-/* get_line_from_file() - This function reads an entire line from a text file
- * up to a newline. It returns a malloc'ed char * which must be stored and
- * free'ed  by the caller. */
-extern char *get_line_from_file(FILE *file)
-{
-	static const int GROWBY = 80; /* how large we will grow strings by */
-
-	int ch;
-	int idx = 0;
-	char *linebuf = NULL;
-	int linebufsz = 0;
-
-	while (1) {
-		ch = fgetc(file);
-		if (ch == EOF)
-			break;
-		/* grow the line buffer as necessary */
-		while (idx > linebufsz-2)
-			linebuf = xrealloc(linebuf, linebufsz += GROWBY);
-		linebuf[idx++] = (char)ch;
-		if ((char)ch == '\n')
-			break;
-	}
-
-	if (idx == 0)
-		return NULL;
-
-	linebuf[idx] = 0;
-	return linebuf;
-}
-
-#if defined BB_CAT
-extern void print_file(FILE *file)
-{
-	int c;
-
-	while ((c = getc(file)) != EOF)
-		putc(c, stdout);
-	fclose(file);
-	fflush(stdout);
-}
-
-extern int print_file_by_name(char *filename)
-{
-	FILE *file;
-	file = fopen(filename, "r");
-	if (file == NULL) {
-		return FALSE;
-	}
-	print_file(file);
-	return TRUE;
-}
-#endif /* BB_CAT || BB_LSMOD */
-
-#if defined BB_ECHO || defined BB_TR
-char process_escape_sequence(char **ptr)
-{
-	char c;
-
-	switch (c = *(*ptr)++) {
-	case 'a':
-		c = '\a';
-		break;
-	case 'b':
-		c = '\b';
-		break;
-	case 'f':
-		c = '\f';
-		break;
-	case 'n':
-		c = '\n';
-		break;
-	case 't':
-		c = '\t';
-		break;
-	case 'v':
-		c = '\v';
-		break;
-	case '\\':
-		c = '\\';
-		break;
-	case '0': case '1': case '2': case '3':
-	case '4': case '5': case '6': case '7':
-		c -= '0';
-		if ('0' <= **ptr && **ptr <= '7') {
-			c = c * 8 + (*(*ptr)++ - '0');
-			if ('0' <= **ptr && **ptr <= '7')
-				c = c * 8 + (*(*ptr)++ - '0');
-		}
-		break;
-	default:
-		(*ptr)--;
-		c = '\\';
-		break;
-	}
-	return c;
-}
-#endif
-
-#if defined BB_BASENAME || defined BB_LN || defined BB_SH
-char *get_last_path_component(char *path)
-{
-	char *s=path+strlen(path)-1;
-
-	/* strip trailing slashes */
-	while (s && *s == '/') {
-		*s-- = '\0';
-	}
-
-	/* find last component */
-	s = strrchr(path, '/');
-	if (s==NULL) return path;
-	else return s+1;
-}
-#endif
-
-#if defined BB_GREP || defined BB_SED
-void xregcomp(regex_t *preg, const char *regex, int cflags)
-{
-	int ret;
-	if ((ret = regcomp(preg, regex, cflags)) != 0) {
-		int errmsgsz = regerror(ret, preg, NULL, 0);
-		char *errmsg = xmalloc(errmsgsz);
-		regerror(ret, preg, errmsg, errmsgsz);
-		fatalError("bb_regcomp: %s\n", errmsg);
-	}
-}
-#endif
-
-/* END CODE */
-/*
-Local Variables:
-c-file-style: "linux"
-c-basic-offset: 4
-tab-width: 4
-End:
-*/
diff --git a/mdk-stage1/insmod-modutils/Makefile b/mdk-stage1/insmod-modutils/Makefile
deleted file mode 100644
index 48508ba1f..000000000
--- a/mdk-stage1/insmod-modutils/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
- #******************************************************************************
- #
- #    insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-INCS = -I./include
-
-TAINT_URL = http://www.tux.org/lkml/\#export-tainted
-
-DEFS = -Wno-error -D_GNU_SOURCE \
-       -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH) \
-       -DTAINT_URL='"$(TAINT_URL)"'
-
-
-DIRS = util obj
-
-all: dirs insmod libinsmod.a
-
-dirs:
-	@for n in . $(DIRS); do \
-		[ "$$n" = "." ] || make -C $$n ;\
-	done
-
-clean:
-	@for n in $(DIRS); do \
-		(cd $$n; make clean) \
-	done
-	rm -rf t *.o insmod libinsmod.a
-
-
-insmod: insmod-frontend.o insmod.o ./util/libutil-STANDALONE.a ./obj/libobj.a
-	$(DIET) gcc -o $@ $^
-	$(STRIPCMD) $@
-
-t/.create_stuff: util/libutil.a obj/libobj.a
-	rm -rf t
-	mkdir t
-	cd t &&	for e in $^; do ar -x ../$$e; done
-	touch t/.create_stuff
-
-libinsmod.a: insmod.o t/.create_stuff
-	ar cru $@ insmod.o t/*
-	ranlib $@
-
-insmod-frontend.o: insmod-frontend.c insmod.c
-	$(DIET) gcc $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -c insmod-frontend.c
-
-insmod.o: insmod.c
-	$(DIET) gcc $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -c insmod.c
diff --git a/mdk-stage1/insmod-modutils/include/config.h b/mdk-stage1/insmod-modutils/include/config.h
deleted file mode 100644
index 3a37b00d4..000000000
--- a/mdk-stage1/insmod-modutils/include/config.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Configuration file management
- *
- * Copyright 1994, 1995, 1996, 1997:
- *	Jacques Gelinas <jack@solucorp.qc.ca>
- *	Bj�rn Ekwall <bj0rn@blox.se> February, March 1999
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifndef _CONFIG_H
-#define _CONFIG_H
-
-#include <stdio.h>
-#include <sys/utsname.h>
-
-#define MODUTILS_MACROS        "/lib/modutils/macros"
-#define ETC_MODULES_CONF	"/etc/modules.conf"
-
-#define EXEC_PRE_INSTALL 0
-#define EXEC_POST_INSTALL 1
-#define EXEC_PRE_REMOVE 2
-#define EXEC_POST_REMOVE 3
-#define EXEC_INSTALL 4
-#define EXEC_REMOVE 5
-
-struct PATH_TYPE {
-	char *type;
-	char *path;
-};
-
-struct EXEC_TYPE {
-	int when;
-	char *module;
-	char *cmd;
-};
-
-typedef struct {
-	char *name;
-	GLOB_LIST *opts;
-	int autoclean;
-} OPT_LIST;
-
-/* config.c */
-extern int flag_autoclean;
-extern struct utsname uts_info;
-extern char *aliaslist[];
-extern struct PATH_TYPE *modpath;
-extern int nmodpath;
-extern struct EXEC_TYPE *execs;
-extern int nexecs;
-extern char *insmod_opt;
-extern char *config_file;
-extern char *optlist[];
-extern char *prune[];
-extern OPT_LIST *opt_list;
-extern OPT_LIST *abovelist;
-extern OPT_LIST *belowlist;
-extern OPT_LIST *prunelist;
-extern OPT_LIST *probe_list;
-extern OPT_LIST *probeall_list;
-extern OPT_LIST *aliases;
-extern time_t config_mtime;
-extern int root_check_off;	/* Check modules are owned by root? */
-
-/* Information about generated files */
-struct gen_files {
-	char *base;		/* xxx in /lib/modules/`uname -r`/modules.xxx */
-	char *name;             /* name actually used */
-	time_t mtime;
-};
-
-extern struct gen_files gen_file[];
-extern const int gen_file_count;
-/* The enum order must match the gen_file initialization order in config.c */
-enum gen_file_enum {
-	GEN_GENERIC_STRINGFILE,
-	GEN_PCIMAPFILE,
-	GEN_ISAPNPMAPFILE,
-	GEN_USBMAPFILE,
-	GEN_PARPORTMAPFILE,
-	GEN_IEEE1394MAPFILE,
-	GEN_PNPBIOSMAPFILE,
-	GEN_DEPFILE,
-};
-
-extern char *persistdir;
-
-char *fgets_strip(char *buf, int sizebuf, FILE * fin, int *lineno);
-int config_read(int all, char *force_ver, char *base_dir, char *conf_file);
-GLOB_LIST *config_lstmod(const char *match, const char *type, int first_only);
-char *search_module_path(const char *base);
-
-#endif /* _CONFIG_H */
diff --git a/mdk-stage1/insmod-modutils/include/elf_alpha.h b/mdk-stage1/insmod-modutils/include/elf_alpha.h
deleted file mode 100644
index 4202bcc14..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_alpha.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for the Alpha.  */
-
-#define ELFCLASSM	ELFCLASS64
-#define ELFDATAM	ELFDATA2LSB
-
-#define MATCH_MACHINE(x)  (x == EM_ALPHA)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_arm.h b/mdk-stage1/insmod-modutils/include/elf_arm.h
deleted file mode 100644
index cf04cafe0..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_arm.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for ARM.  */
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2LSB
-
-#define MATCH_MACHINE(x)  (x == EM_ARM)
-
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_hppa.h b/mdk-stage1/insmod-modutils/include/elf_hppa.h
deleted file mode 100644
index 9a1bd34ce..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_hppa.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for HP-PA.  */
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_PARISC)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_hppa64.h b/mdk-stage1/insmod-modutils/include/elf_hppa64.h
deleted file mode 100644
index 05b201aef..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_hppa64.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for HP-PA64.  */
-
-#define ELFCLASSM	ELFCLASS64
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_PARISC)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_i386.h b/mdk-stage1/insmod-modutils/include/elf_i386.h
deleted file mode 100644
index f5c57d384..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_i386.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for i386 et al.  */
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2LSB
-
-#define MATCH_MACHINE(x)  (x == EM_386)
-
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_ia64.h b/mdk-stage1/insmod-modutils/include/elf_ia64.h
deleted file mode 100644
index b4d902956..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_ia64.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for ia64.  */
-
-#define ELFCLASSM	ELFCLASS64
-#define ELFDATAM	ELFDATA2LSB
-
-#define MATCH_MACHINE(x)  (x == EM_IA_64)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_m68k.h b/mdk-stage1/insmod-modutils/include/elf_m68k.h
deleted file mode 100644
index c488ba9d1..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_m68k.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for m68k.  */
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_68K)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_mips.h b/mdk-stage1/insmod-modutils/include/elf_mips.h
deleted file mode 100644
index 4b91ddd01..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_mips.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* Machine-specific elf macros for MIPS.  */
-
-#define ELFCLASSM	ELFCLASS32
-#ifdef __MIPSEB__
-#define ELFDATAM	ELFDATA2MSB
-#endif
-#ifdef __MIPSEL__
-#define ELFDATAM	ELFDATA2LSB
-#endif
-
-/* Account for ELF spec changes.  */
-#ifndef EM_MIPS_RS3_LE
-#ifdef EM_MIPS_RS4_BE
-#define EM_MIPS_RS3_LE	EM_MIPS_RS4_BE
-#else
-#define EM_MIPS_RS3_LE	10
-#endif
-#endif /* !EM_MIPS_RS3_LE */
-
-#define MATCH_MACHINE(x)  (x == EM_MIPS || x == EM_MIPS_RS3_LE)
-
-#define SHT_RELM	SHT_REL
-#define Elf32_RelM	Elf32_Rel
diff --git a/mdk-stage1/insmod-modutils/include/elf_ppc.h b/mdk-stage1/insmod-modutils/include/elf_ppc.h
deleted file mode 100644
index b0060ace1..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_ppc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for the PowerPC.  */
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_PPC)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_s390.h b/mdk-stage1/insmod-modutils/include/elf_s390.h
deleted file mode 100644
index 7a35bde93..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_s390.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* Machine-specific elf macros for i386 et al.  */
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define EM_S390_OLD	0xa390
-
-#define MATCH_MACHINE(x)  (x == EM_S390 || x == EM_S390_OLD)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_sparc.h b/mdk-stage1/insmod-modutils/include/elf_sparc.h
deleted file mode 100644
index 8903b2654..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_sparc.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* Machine-specific elf macros for the Sparc.  */
-
-#define ELFCLASSM	ELFCLASS32
-#define ELFDATAM	ELFDATA2MSB
-
-#define MATCH_MACHINE(x)  (x == EM_SPARC)
-
-#define SHT_RELM	SHT_RELA
-#define Elf32_RelM	Elf32_Rela
diff --git a/mdk-stage1/insmod-modutils/include/elf_sparc64.h b/mdk-stage1/insmod-modutils/include/elf_sparc64.h
deleted file mode 100644
index 891e0c3d9..000000000
--- a/mdk-stage1/insmod-modutils/include/elf_sparc64.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* Machine-specific elf macros for the Sparc.  */
-
-#define ELFCLASSM	ELFCLASS64
-#define ELFDATAM	ELFDATA2MSB
-
-#ifndef EM_SPARCV9
-#define EM_SPARCV9 43
-#endif
-#ifndef EM_SPARC64
-#define EM_SPARC64 11
-#endif
-#define MATCH_MACHINE(x)  ((x) == EM_SPARCV9 || (x) == EM_SPARC64)
-
-#define SHT_RELM	SHT_RELA
-#define Elf64_RelM	Elf64_Rela
-
-#ifndef ELF64_R_SYM
-#define ELF64_R_SYM(x)	((x) >> 32)
-#define ELF64_R_TYPE(x)	((unsigned)(x))
-#endif
-
-#ifndef ELF64_ST_BIND
-#define ELF64_ST_BIND(x)	((x) >> 4)
-#define ELF64_ST_TYPE(x)	((x) & 0xf)
-#endif
-
diff --git a/mdk-stage1/insmod-modutils/include/kallsyms.h b/mdk-stage1/insmod-modutils/include/kallsyms.h
deleted file mode 100644
index 90bb75f22..000000000
--- a/mdk-stage1/insmod-modutils/include/kallsyms.h
+++ /dev/null
@@ -1,129 +0,0 @@
-#ifndef MODUTILS_KALLSYMS_H
-#define MODUTILS_KALLSYMS_H 1
-
-/* kallsyms headers
-   Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.  It is exported to kernel
-   space so debuggers can access the kallsyms data.
-
-   The kallsyms data contains all the non-stack symbols from a kernel
-   or a module.  The kernel symbols are held between __start___kallsyms
-   and __stop___kallsyms.  The symbols for a module are accessed via
-   the struct module chain which is based at module_list.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/* Have to (re)define these ElfW entries here because external kallsyms
- * code does not have access to modutils/include/obj.h.  This code is
- * included from user spaces tools (modutils) and kernel, they need
- * different includes.
- */
-
-#ifndef ELFCLASS32
-#ifdef __KERNEL__
-#include <linux/elf.h>
-#else	/* __KERNEL__ */
-#include <elf.h>
-#endif	/* __KERNEL__ */
-#endif	/* ELFCLASS32 */
-
-#ifndef ELFCLASSM
-#define ELFCLASSM ELF_CLASS
-#endif
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-#  define ElfW(x)  Elf32_ ## x
-#  define ELFW(x)  ELF32_ ## x
-# else
-#  define ElfW(x)  Elf64_ ## x
-#  define ELFW(x)  ELF64_ ## x
-# endif
-#endif
-
-/* Format of data in the kallsyms section.
- * Most of the fields are small numbers but the total size and all
- * offsets can be large so use the 32/64 bit types for these fields.
- *
- * Do not use sizeof() on these structures, modutils may be using extra
- * fields.  Instead use the size fields in the header to access the
- * other bits of data.
- */  
-
-struct kallsyms_header {
-	int		size;		/* Size of this header */
-	ElfW(Word)	total_size;	/* Total size of kallsyms data */
-	int		sections;	/* Number of section entries */
-	ElfW(Off)	section_off;	/* Offset to first section entry */
-	int		section_size;	/* Size of one section entry */
-	int		symbols;	/* Number of symbol entries */
-	ElfW(Off)	symbol_off;	/* Offset to first symbol entry */
-	int		symbol_size;	/* Size of one symbol entry */
-	ElfW(Off)	string_off;	/* Offset to first string */
-	ElfW(Addr)	start;		/* Start address of first section */
-	ElfW(Addr)	end;		/* End address of last section */
-};
-
-struct kallsyms_section {
-	ElfW(Addr)	start;		/* Start address of section */
-	ElfW(Word)	size;		/* Size of this section */
-	ElfW(Off)	name_off;	/* Offset to section name */
-	ElfW(Word)	flags;		/* Flags from section */
-};
-
-struct kallsyms_symbol {
-	ElfW(Off)	section_off;	/* Offset to section that owns this symbol */
-	ElfW(Addr)	symbol_addr;	/* Address of symbol */
-	ElfW(Off)	name_off;	/* Offset to symbol name */
-};
-
-#define KALLSYMS_SEC_NAME "__kallsyms"
-#define KALLSYMS_IDX 2			/* obj_kallsyms creates kallsyms as section 2 */
-
-#define kallsyms_next_sec(h,s) \
-	((s) = (struct kallsyms_section *)((char *)(s) + (h)->section_size))
-#define kallsyms_next_sym(h,s) \
-	((s) = (struct kallsyms_symbol *)((char *)(s) + (h)->symbol_size))
-
-int kallsyms_symbol_to_address(
-	const char       *name,			/* Name to lookup */
-	unsigned long    *token,		/* Which module to start with */
-	const char      **mod_name,		/* Set to module name or "kernel" */
-	unsigned long    *mod_start,		/* Set to start address of module */
-	unsigned long    *mod_end,		/* Set to end address of module */
-	const char      **sec_name,		/* Set to section name */
-	unsigned long    *sec_start,		/* Set to start address of section */
-	unsigned long    *sec_end,		/* Set to end address of section */
-	const char      **sym_name,		/* Set to full symbol name */
-	unsigned long    *sym_start,		/* Set to start address of symbol */
-	unsigned long    *sym_end		/* Set to end address of symbol */
-	);
-
-int kallsyms_address_to_symbol(
-	unsigned long     address,		/* Address to lookup */
-	const char      **mod_name,		/* Set to module name */
-	unsigned long    *mod_start,		/* Set to start address of module */
-	unsigned long    *mod_end,		/* Set to end address of module */
-	const char      **sec_name,		/* Set to section name */
-	unsigned long    *sec_start,		/* Set to start address of section */
-	unsigned long    *sec_end,		/* Set to end address of section */
-	const char      **sym_name,		/* Set to full symbol name */
-	unsigned long    *sym_start,		/* Set to start address of symbol */
-	unsigned long    *sym_end		/* Set to end address of symbol */
-	);
-
-#endif /* kallsyms.h */
diff --git a/mdk-stage1/insmod-modutils/include/kerneld.h b/mdk-stage1/insmod-modutils/include/kerneld.h
deleted file mode 100644
index f32e34b4a..000000000
--- a/mdk-stage1/insmod-modutils/include/kerneld.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* Definitions for the Linux kerneld SYSV IPC interface.
-   This file was part of the Linux kernel, and so is covered by the GPL.  */
-
-#ifndef MODUTILS_KERNELD_H
-#define MODUTILS_KERNELD_H
-
-#define KERNELD_SYSTEM 1
-#define KERNELD_REQUEST_MODULE 2		/* "insmod" */
-#define KERNELD_RELEASE_MODULE 3		/* "rmmod" */
-#define KERNELD_DELAYED_RELEASE_MODULE 4	/* "rmmod" */
-#define KERNELD_CANCEL_RELEASE_MODULE 5		/* "rmmod" */
-#define KERNELD_REQUEST_ROUTE 6			/* net/ipv4/route.c */
-#define KERNELD_BLANKER 7			/* drivers/char/console.c */
-#define KERNELD_PNP 8				/* drivers/pnp/kerneld.c */
-#define KERNELD_ARP 256				/* net/ipv4/arp.c */
-
-#ifdef NEW_KERNELD_PROTOCOL
-# define OLDIPC_KERNELD 00040000	/* old kerneld message channel */
-# define IPC_KERNELD 00140000		/* new kerneld message channel */
-# define KDHDR (sizeof(long) + sizeof(short) + sizeof(short))
-# define NULL_KDHDR 0, 2, 0
-#else /* NEW_KERNELD_PROTOCOL */
-# define IPC_KERNELD 00040000
-# define KDHDR (sizeof(long))
-# define NULL_KDHDR 0
-#endif /* NEW_KERNELD_PROTOCOL */
-
-#define KERNELD_MAXCMD 0x7ffeffff
-#define KERNELD_MINSEQ 0x7fff0000 /* "commands" legal up to 0x7ffeffff */
-#define KERNELD_WAIT 0x80000000
-#define KERNELD_NOWAIT 0
-
-struct kerneld_msg
-  {
-    long mtype;
-    long id;
-#ifdef NEW_KERNELD_PROTOCOL
-    short version;
-    short pid;
-#endif /* NEW_KERNELD_PROTOCOL */
-    char text[1];
-  };
-
-#endif /* kerneld.h */
diff --git a/mdk-stage1/insmod-modutils/include/modstat.h b/mdk-stage1/insmod-modutils/include/modstat.h
deleted file mode 100644
index b8a58eeae..000000000
--- a/mdk-stage1/insmod-modutils/include/modstat.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * For kernel module status and information
- *
- * Add module_name_list and l_module_name_list.
- *   Keith Owens <kaos@ocs.com.au> November 1999.
- * Bj�rn Ekwall <bj0rn@blox.se> February 1999.
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-#ifndef _KERNEL_H
-#define _KERNEL_H
-
-#define K_SYMBOLS 1 /* Want info about symbols */
-#define K_INFO 2 /* Want extended module info */
-#define K_REFS 4 /* Want info about references */
-
-struct module_stat {
-	char *name;
-	unsigned long addr;
-	unsigned long modstruct; /* COMPAT_2_0! *//* depends on architecture? */
-	unsigned long size;
-	unsigned long flags;
-	long usecount;
-	size_t nsyms;
-	struct module_symbol *syms;
-	size_t nrefs;
-	struct module_stat **refs;
-	unsigned long status;
-};
-
-extern struct module_stat *module_stat;
-extern size_t n_module_stat;
-extern char *module_name_list;
-extern size_t l_module_name_list;
-extern struct module_symbol *ksyms;
-extern size_t nksyms;
-extern int k_new_syscalls;
-
-int get_kernel_info(int type);
-
-#endif /* _KERNEL_H */
diff --git a/mdk-stage1/insmod-modutils/include/module.h b/mdk-stage1/insmod-modutils/include/module.h
deleted file mode 100644
index ae8224f8a..000000000
--- a/mdk-stage1/insmod-modutils/include/module.h
+++ /dev/null
@@ -1,217 +0,0 @@
-#ifndef MODUTILS_MODULE_H
-#define MODUTILS_MODULE_H 1
-
-/* Definitions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-/* This file contains the structures used by the 2.0 and 2.1 kernels.
-   We do not use the kernel headers directly because we do not wish
-   to be dependant on a particular kernel version to compile insmod.  */
-
-
-/*======================================================================*/
-/* The structures used by Linux 2.0.  */
-
-/* The symbol format used by get_kernel_syms(2).  */
-struct old_kernel_sym
-{
-  unsigned long value;
-  char name[60];
-};
-
-struct old_module_ref
-{
-  unsigned long module;		/* kernel addresses */
-  unsigned long next;
-};
-
-struct old_module_symbol
-{
-  unsigned long addr;
-  unsigned long name;
-};
-
-struct old_symbol_table
-{
-  int size;			/* total, including string table!!! */
-  int n_symbols;
-  int n_refs;
-  struct old_module_symbol symbol[0]; /* actual size defined by n_symbols */
-  struct old_module_ref ref[0];	/* actual size defined by n_refs */
-};
-
-struct old_mod_routines
-{
-  unsigned long init;
-  unsigned long cleanup;
-};
-
-struct old_module
-{
-  unsigned long next;
-  unsigned long ref;		/* the list of modules that refer to me */
-  unsigned long symtab;
-  unsigned long name;
-  int size;			/* size of module in pages */
-  unsigned long addr;		/* address of module */
-  int state;
-  unsigned long cleanup;	/* cleanup routine */
-};
-
-/* Sent to init_module(2) or'ed into the code size parameter.  */
-#define OLD_MOD_AUTOCLEAN 0x40000000 /* big enough, but no sign problems... */
-
-int get_kernel_syms(struct old_kernel_sym *);
-int old_sys_init_module(const char *name, char *code, unsigned codesize,
-			struct old_mod_routines *, struct old_symbol_table *);
-
-/*======================================================================*/
-/* For sizeof() which are related to the module platform and not to the
-   environment isnmod is running in, use sizeof_xx instead of sizeof(xx).  */
-
-#define tgt_sizeof_char		sizeof(char)
-#define tgt_sizeof_short	sizeof(short)
-#define tgt_sizeof_int		sizeof(int)
-#define tgt_sizeof_long		sizeof(long)
-#define tgt_sizeof_char_p	sizeof(char *)
-#define tgt_sizeof_void_p	sizeof(void *)
-#define tgt_long		long
-#define tgt_long_fmt		"l"
-
-/* This assumes that long long on a 32 bit system is equivalent to long on the
- * equivalent 64 bit system.  Also that void and char pointers are 8 bytes on
- * all 64 bit systems.  Add per system tweaks if it ever becomes necessary.
- */
-#if defined(COMMON_3264) && defined(ONLY_64)
-#undef tgt_long
-#undef tgt_long_fmt
-#undef tgt_sizeof_long
-#undef tgt_sizeof_char_p
-#undef tgt_sizeof_void_p
-#define tgt_long                long long
-#define tgt_long_fmt		"ll"
-#define tgt_sizeof_long         8
-#define tgt_sizeof_char_p       8
-#define tgt_sizeof_void_p       8
-#endif
-
-/*======================================================================*/
-/* The structures used in Linux 2.1 onwards.  */
-
-/* Note: module_symbol does not use tgt_long intentionally */
-struct module_symbol
-{
-  unsigned long value;
-  unsigned long name;
-};
-
-struct module_ref
-{
-  unsigned tgt_long dep;		/* kernel addresses */
-  unsigned tgt_long ref;
-  unsigned tgt_long next_ref;
-};
-
-struct module
-{
-  unsigned tgt_long size_of_struct;	/* == sizeof(module) */
-  unsigned tgt_long next;
-  unsigned tgt_long name;
-  unsigned tgt_long size;
-
-  tgt_long usecount;
-  unsigned tgt_long flags;		/* AUTOCLEAN et al */
-
-  unsigned nsyms;
-  unsigned ndeps;
-
-  unsigned tgt_long syms;
-  unsigned tgt_long deps;
-  unsigned tgt_long refs;
-  unsigned tgt_long init;
-  unsigned tgt_long cleanup;
-  unsigned tgt_long ex_table_start;
-  unsigned tgt_long ex_table_end;
-#ifdef __alpha__
-  unsigned tgt_long gp;
-#endif
-  /* Everything after here is extension.  */
-  unsigned tgt_long read_start;		/* Read data from existing module */
-  unsigned tgt_long read_end;
-  unsigned tgt_long can_unload;
-  unsigned tgt_long runsize;
-  unsigned tgt_long kallsyms_start;
-  unsigned tgt_long kallsyms_end;
-  unsigned tgt_long archdata_start;
-  unsigned tgt_long archdata_end;
-  unsigned tgt_long kernel_data;
-};
-
-struct module_info
-{
-  unsigned long addr;
-  unsigned long size;
-  unsigned long flags;
-	   long usecount;
-};
-
-/* Bits of module.flags.  */
-#define NEW_MOD_RUNNING		1
-#define NEW_MOD_DELETED		2
-#define NEW_MOD_AUTOCLEAN	4
-#define NEW_MOD_VISITED		8
-#define NEW_MOD_USED_ONCE	16
-#define NEW_MOD_INITIALIZING	64
-
-int sys_init_module(const char *name, const struct module *);
-int query_module(const char *name, int which, void *buf, size_t bufsize,
-		 size_t *ret);
-
-/* Values for query_module's which.  */
-
-#define QM_MODULES	1
-#define QM_DEPS		2
-#define QM_REFS		3
-#define QM_SYMBOLS	4
-#define QM_INFO		5
-
-/*======================================================================*/
-/* The system calls unchanged between 2.0 and 2.1.  */
-
-unsigned long create_module(const char *, size_t);
-int delete_module(const char *);
-
-/* In safe mode the last parameter is forced to be a module name and meta
- * expansion is not allowed on that name.
- */
-extern unsigned int safemode;
-
-/*======================================================================*/
-/* Tainted kernel information.  This must match include/linux/kernel.h  */
-/* and kernel/panic.c.                                                  */
-
-#define TAINT_FILENAME			"/proc/sys/kernel/tainted"
-#define TAINT_PROPRIETORY_MODULE	(1<<0)
-#define TAINT_FORCED_MODULE		(1<<1)
-#define TAINT_UNSAFE_SMP		(1<<2)
-
-#endif /* module.h */
diff --git a/mdk-stage1/insmod-modutils/include/obj.h b/mdk-stage1/insmod-modutils/include/obj.h
deleted file mode 100644
index de346b16a..000000000
--- a/mdk-stage1/insmod-modutils/include/obj.h
+++ /dev/null
@@ -1,298 +0,0 @@
-#ifndef MODUTILS_OBJ_H
-#define MODUTILS_OBJ_H 1
-
-/* Elf object file loading and relocation routines.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-   obj_free() added by Bj�rn Ekwall <bj0rn@blox.se> March 1999
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-/* The relocatable object is manipulated using elfin types.  */
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <elf.h>
-#include ELF_MACHINE_H
-#include "module.h"
-
-#ifndef ElfW
-# if ELFCLASSM == ELFCLASS32
-#  define ElfW(x)  Elf32_ ## x
-#  define ELFW(x)  ELF32_ ## x
-# else
-#  define ElfW(x)  Elf64_ ## x
-#  define ELFW(x)  ELF64_ ## x
-# endif
-#endif
-
-#if defined(COMMON_3264) && defined(ONLY_32)
-#  define ObjW(x)  obj32_ ## x
-#else
-#  if defined(COMMON_3264) && defined(ONLY_64)
-#    define ObjW(x)  obj64_ ## x
-#  else
-#    define ObjW(x)    obj_ ## x
-#  endif
-#endif
-
-/* For some reason this is missing from lib5.  */
-#ifndef ELF32_ST_INFO
-# define ELF32_ST_INFO(bind, type)       (((bind) << 4) + ((type) & 0xf))
-#endif
-
-#ifndef ELF64_ST_INFO
-# define ELF64_ST_INFO(bind, type)       (((bind) << 4) + ((type) & 0xf))
-#endif
-
-struct obj_string_patch_struct;
-struct obj_symbol_patch_struct;
-
-struct obj_section
-{
-  ElfW(Shdr) header;
-  const char *name;
-  char *contents;
-  struct obj_section *load_next;
-  int idx;
-};
-
-struct obj_symbol
-{
-  struct obj_symbol *next;	/* hash table link */
-  const char *name;
-  tgt_long value;
-  unsigned long size;
-  int secidx;			/* the defining section index/module */
-  int info;
-  int ksymidx;			/* for export to the kernel symtab */
-  int r_type;			/* relocation type */
-};
-
-/* Hardcode the hash table size.  We shouldn't be needing so many
-   symbols that we begin to degrade performance, and we get a big win
-   by giving the compiler a constant divisor.  */
-
-#define HASH_BUCKETS  521
-
-struct obj_file
-{
-  ElfW(Ehdr) header;
-  ElfW(Addr) baseaddr;
-  struct obj_section **sections;
-  struct obj_section *load_order;
-  struct obj_section **load_order_search_start;
-  struct obj_string_patch_struct *string_patches;
-  struct obj_symbol_patch_struct *symbol_patches;
-  int (*symbol_cmp)(const char *, const char *);
-  unsigned long (*symbol_hash)(const char *);
-  unsigned long local_symtab_size;
-  struct obj_symbol **local_symtab;
-  struct obj_symbol *symtab[HASH_BUCKETS];
-  const char *filename;
-  char *persist;
-};
-
-enum obj_reloc
-{
-  obj_reloc_ok,
-  obj_reloc_overflow,
-  obj_reloc_dangerous,
-  obj_reloc_unhandled,
-  obj_reloc_constant_gp
-};
-
-struct obj_string_patch_struct
-{
-  struct obj_string_patch_struct *next;
-  int reloc_secidx;
-  ElfW(Addr) reloc_offset;
-  ElfW(Addr) string_offset;
-};
-
-struct obj_symbol_patch_struct
-{
-  struct obj_symbol_patch_struct *next;
-  int reloc_secidx;
-  ElfW(Addr) reloc_offset;
-  struct obj_symbol *sym;
-};
-
-
-/* Generic object manipulation routines.  */
-
-#define obj_elf_hash			ObjW(elf_hash)
-#define obj_elf_hash_n			ObjW(elf_hash_n)
-#define obj_add_symbol			ObjW(add_symbol)
-#define obj_find_symbol			ObjW(find_symbol)
-#define obj_symbol_final_value		ObjW(symbol_final_value)
-#define obj_set_symbol_compare		ObjW(set_symbol_compare)
-#define obj_find_section		ObjW(find_section)
-#define obj_insert_section_load_order	ObjW(insert_section_load_order)
-#define obj_create_alloced_section	ObjW(create_alloced_section)
-#define obj_create_alloced_section_first \
-					ObjW(create_alloced_section_first)
-#define obj_extend_section		ObjW(extend_section)
-#define obj_string_patch		ObjW(string_patch)
-#define obj_symbol_patch		ObjW(symbol_patch)
-#define obj_check_undefineds		ObjW(check_undefineds)
-#define obj_clear_undefineds		ObjW(clear_undefineds)
-#define obj_allocate_commons		ObjW(allocate_commons)
-#define obj_load_size			ObjW(load_size)
-#define obj_relocate			ObjW(relocate)
-#define obj_load			ObjW(load)
-#define obj_free			ObjW(free)
-#define obj_create_image		ObjW(create_image)
-#define obj_addr_to_native_ptr		ObjW(addr_to_native_ptr)
-#define obj_native_ptr_to_addr		ObjW(native_ptr_to_addr)
-#define obj_kallsyms			ObjW(kallsyms)
-#define obj_gpl_license			ObjW(gpl_license)
-#define arch_new_file			ObjW(arch_new_file)
-#define arch_new_section		ObjW(arch_new_section)
-#define arch_new_symbol			ObjW(arch_new_symbol)
-#define arch_apply_relocation		ObjW(arch_apply_relocation)
-#define arch_create_got			ObjW(arch_create_got)
-#define arch_init_module		ObjW(arch_init_module)
-#define arch_load_proc_section		ObjW(arch_load_proc_section)
-#define arch_finalize_section_address	ObjW(arch_finalize_section_address)
-#define arch_archdata			ObjW(arch_archdata)
-
-unsigned long obj_elf_hash (const char *);
-
-unsigned long obj_elf_hash_n (const char *, unsigned long len);
-
-struct obj_symbol *obj_add_symbol (struct obj_file *f, const char *name,
-				   unsigned long symidx, int info, int secidx,
-				   ElfW(Addr) value, unsigned long size);
-
-struct obj_symbol *obj_find_symbol (struct obj_file *f,
-					 const char *name);
-
-ElfW(Addr) obj_symbol_final_value (struct obj_file *f,
-				  struct obj_symbol *sym);
-
-void obj_set_symbol_compare (struct obj_file *f,
-			    int (*cmp)(const char *, const char *),
-			    unsigned long (*hash)(const char *));
-
-struct obj_section *obj_find_section (struct obj_file *f,
-					   const char *name);
-
-void obj_insert_section_load_order (struct obj_file *f,
-				    struct obj_section *sec);
-
-struct obj_section *obj_create_alloced_section (struct obj_file *f,
-						const char *name,
-						unsigned long align,
-						unsigned long size,
-						unsigned long flags);
-
-struct obj_section *obj_create_alloced_section_first (struct obj_file *f,
-						      const char *name,
-						      unsigned long align,
-						      unsigned long size);
-
-void *obj_extend_section (struct obj_section *sec, unsigned long more);
-
-int obj_string_patch (struct obj_file *f, int secidx, ElfW(Addr) offset,
-		     const char *string);
-
-int obj_symbol_patch (struct obj_file *f, int secidx, ElfW(Addr) offset,
-		     struct obj_symbol *sym);
-
-int obj_check_undefineds (struct obj_file *f, int quiet);
-
-void obj_clear_undefineds (struct obj_file *f);
-
-void obj_allocate_commons (struct obj_file *f);
-
-unsigned long obj_load_size (struct obj_file *f);
-
-int obj_relocate (struct obj_file *f, ElfW(Addr) base);
-
-struct obj_file *obj_load (int f, Elf32_Half e_type, const char *filename);
-
-void obj_free (struct obj_file *f);
-
-int obj_create_image (struct obj_file *f, char *image);
-
-int obj_kallsyms (struct obj_file *fin, struct obj_file **fout);
-
-/* Architecture specific manipulation routines.  */
-
-struct obj_file *arch_new_file (void);
-
-struct obj_section *arch_new_section (void);
-
-struct obj_symbol *arch_new_symbol (void);
-
-enum obj_reloc arch_apply_relocation (struct obj_file *f,
-				      struct obj_section *targsec,
-				      struct obj_section *symsec,
-				      struct obj_symbol *sym,
-				      ElfW(RelM) *rel, ElfW(Addr) value);
-
-int arch_create_got (struct obj_file *f);
-
-struct module;
-int arch_init_module (struct obj_file *f, struct module *);
-
-int arch_load_proc_section (struct obj_section *sec, int fp);
-
-int arch_finalize_section_address (struct obj_file *f, ElfW(Addr) base);
-
-int arch_archdata (struct obj_file *fin, struct obj_section *sec);
-
-#define ARCHDATA_SEC_NAME "__archdata"
-
-/* Pointers in objects can be 32 or 64 bit */
-union obj_ptr_4 {
-	Elf32_Word addr;
-	void *ptr;
-};
-union obj_ptr_8 {
-	u_int64_t addr;	/* Should be Elf64_Xword but not all users have this yet */
-	void *ptr;
-};
-
-void *obj_addr_to_native_ptr(ElfW(Addr));
-
-ElfW(Addr) obj_native_ptr_to_addr(void *);
-
-/* Standard method of finding relocation symbols, sets isym */
-#define obj_find_relsym(isym, f, find, rel, symtab, strtab) \
-	{ \
-		unsigned long symndx = ELFW(R_SYM)((rel)->r_info); \
-		ElfW(Sym) *extsym = (symtab)+symndx; \
-		if (ELFW(ST_BIND)(extsym->st_info) == STB_LOCAL) { \
-			isym = (typeof(isym)) (f)->local_symtab[symndx]; \
-		} \
-		else { \
-			const char *name; \
-			if (extsym->st_name) \
-				name = (strtab) + extsym->st_name; \
-			else \
-				name = (f)->sections[extsym->st_shndx]->name; \
-			isym = (typeof(isym)) obj_find_symbol((find), name); \
-		} \
-	}
-
-int obj_gpl_license(struct obj_file *, const char **);
-
-#endif /* obj.h */
diff --git a/mdk-stage1/insmod-modutils/include/util.h b/mdk-stage1/insmod-modutils/include/util.h
deleted file mode 100644
index 0a1354bec..000000000
--- a/mdk-stage1/insmod-modutils/include/util.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef MODUTILS_UTIL_H
-#define MODUTILS_UTIL_H 1
-
-/* Miscelaneous utility functions.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-
-#include <stdio.h>
-#include <sys/stat.h>
-
-#define SHELL_META "&();|<>$`\"'\\!{}[]~=+:?*" /* Sum of bj0rn and Debian */
-
-void *xmalloc(size_t);
-void *xrealloc(void *, size_t);
-char *xstrdup(const char *);
-char *xstrcat(char *, const char *, size_t);
-int   xsystem(const char *, char *const[]);
-int   arch64(void);
-
-typedef int (*xftw_func_t)(const char *, const struct stat *);
-extern int xftw(const char *directory, xftw_func_t);
-
-/* Error logging */
-extern int log;
-extern int errors;
-extern const char *error_file;
-
-extern int flag_verbose;
-extern void verbose(const char *ctl,...);
-
-void error(const char *fmt, ...)
-#ifdef __GNUC__
-  __attribute__((format(printf, 1, 2)))
-#endif
-  ;
-
-void lprintf(const char *fmt, ...)
-#ifdef __GNUC__
-  __attribute__((format(printf, 1, 2)))
-#endif
-  ;
-
-void setsyslog(const char *program);
-
-/*
- * Generic globlist <bj0rn@blox.se>
- */
-typedef struct {
-	int pathc;       /* Count of paths matched so far  */
-	char **pathv;    /* List of matched pathnames.  */
-} GLOB_LIST;
-int meta_expand(char *pt, GLOB_LIST *g, char *base_dir, char *version, int type);
-#define ME_BUILTIN_COMMAND	1
-#define ME_SHELL_COMMAND	2
-#define ME_GLOB			4
-#define ME_ALL			(ME_GLOB|ME_SHELL_COMMAND|ME_BUILTIN_COMMAND)
-
-extern void snap_shot(const char *module_name, int number);
-extern void snap_shot_log(const char *fmt,...);
-
-#ifdef CONFIG_USE_ZLIB
-int gzf_open(const char *name, int mode);
-int gzf_read(int fd, void *buf, size_t count);
-off_t gzf_lseek(int fd, off_t offset, int whence);
-void gzf_close(int fd);
-
-#else /* ! CONFIG_USE_ZLIB */
-
-#include <unistd.h>
-
-#define gzf_open	open
-#define gzf_read	read
-#define gzf_lseek	lseek
-#define gzf_close	close
-
-#endif /* CONFIG_USE_ZLIB */
-
-#define SYMPREFIX "__insmod_";
-extern const char symprefix[10];	/* Must be sizeof(SYMPREFIX), including nul */
-
-#endif /* util.h */
diff --git a/mdk-stage1/insmod-modutils/include/version.h b/mdk-stage1/insmod-modutils/include/version.h
deleted file mode 100644
index 9ca0c57a9..000000000
--- a/mdk-stage1/insmod-modutils/include/version.h
+++ /dev/null
@@ -1 +0,0 @@
-#define MODUTILS_VERSION "2.4.19"
diff --git a/mdk-stage1/insmod-modutils/insmod-frontend.c b/mdk-stage1/insmod-modutils/insmod-frontend.c
deleted file mode 100644
index 26fe73c47..000000000
--- a/mdk-stage1/insmod-modutils/insmod-frontend.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-
-
-int insmod_main( int argc, char **argv);
-
-int main( int argc, char **argv)
-{
-	printf("Using insmod provided by modutils.\n");
-	return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-modutils/insmod.c b/mdk-stage1/insmod-modutils/insmod.c
deleted file mode 100644
index b0b7c2a0d..000000000
--- a/mdk-stage1/insmod-modutils/insmod.c
+++ /dev/null
@@ -1,2141 +0,0 @@
-/* Insert a module into a running kernel.
-   Copyright 1996, 1997 Linux International.
-
-   New implementation contributed by Richard Henderson <rth@tamu.edu>
-   Based on original work by Bjorn Ekwall <bj0rn@blox.se>
-   Restructured (and partly rewritten) by:
-	Bj�rn Ekwall <bj0rn@blox.se> February 1999
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-  */
-
-  /*
-     Fixes:
-
-     Adjust module size for mod_use_count in old_init_module:
-     B. James Phillippe <bryan@terran.org>
-
-     Merged modprobe + many fixes: Bj�rn Ekwall <bj0rn@blox.se> February 1999
-     SMP "friendliness" (and -P): Bill Zumach <zumach+@transarc.com>
-
-     Ksymoops support: Keith Owens <kaos@ocs.com.au> August 1999.
-
-     Add -r flag: Keith Owens <kaos@ocs.com.au> October 1999.
-
-     More flexible recognition of the way the utility was called.
-     Suggested by Stepan Kasal, implemented in a different way by Keith
-     Owens <kaos@ocs.com.au> December 1999.
-
-     Rationalize common code for 32/64 bit architectures.
-       Keith Owens <kaos@ocs.com.au> December 1999.
-     Add arch64().
-       Keith Owens <kaos@ocs.com.au> December 1999.
-     kallsyms support
-       Keith Owens <kaos@ocs.com.au> April 2000.
-     archdata support
-       Keith Owens <kaos@ocs.com.au> August 2000.
-     Add insmod -O, move print map before sys_init_module.
-       Keith Owens <kaos@ocs.com.au> October 2000.
-     Add insmod -S.
-       Keith Owens <kaos@ocs.com.au> November 2000.
-     Add persistent data support.
-       Keith Owens <kaos@ocs.com.au> November 2000.
-     Add tainted module support.
-       Keith Owens <kaos@ocs.com.au> September 2001.
-   */
-
-#include "../insmod.h"
-#include <sys/types.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <limits.h>
-#include <ctype.h>
-#include <errno.h>
-#include <stddef.h>
-#include <getopt.h>
-#include <sys/stat.h>
-#include <sys/file.h>
-#include <sys/fcntl.h>
-
-#include "module.h"
-#include "obj.h"
-#include "kallsyms.h"
-#include "util.h"
-#include "version.h"
-
-#include "modstat.h"
-#include "config.h"
-
-#define STRVERSIONLEN	32
-
-/*======================================================================*/
-
-static int flag_force_load = 0;
-static int flag_silent_probe = 0;
-static int flag_export = 1;
-static int flag_load_map = 0;
-static int flag_ksymoops = 1;
-static int flag_numeric_only = 0;
-
-static int n_ext_modules_used;
-static int m_has_modinfo;
-static int gplonly_seen;
-static int warnings;
-
-extern int insmod_main(int argc, char **argv);
-extern int insmod_main_32(int argc, char **argv);
-extern int insmod_main_64(int argc, char **argv);
-extern int modprobe_main(int argc, char **argv);
-extern int rmmod_main(int argc, char **argv);
-extern int ksyms_main(int argc, char **argv);
-extern int lsmod_main(int argc, char **argv);
-extern int kallsyms_main(int argc, char **argv);
-
-/*======================================================================*/
-
-/* Only use the numeric part of the version string? */
-
-static void use_numeric_only(int major, int minor, char *str)
-{
-	if (((major << 8) + minor) >= 0x0205	/* kernel 2.5 */
-	    || flag_numeric_only)
-		*str = '\0';
-}
-
-/* Get the kernel version in the canonical integer form.  */
-
-static int get_kernel_version(char str[STRVERSIONLEN])
-{
-	char *p, *q;
-	int a, b, c;
-
-	strncpy(str, uts_info.release, STRVERSIONLEN-1);
-	str[STRVERSIONLEN-1] = '\0';
-	p = str;
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-	use_numeric_only(a, b, q);
-
-	return a << 16 | b << 8 | c;
-}
-
-/* String comparison for non-co-versioned kernel and module.
- * prefix should be the same as used by genksyms for this kernel.
- */
-static char *ncv_prefix = NULL;	/* Overridden by --prefix option */
-static int ncv_plen = 0;
-
-/* Only set prefix once. If set by the user, use it.  If not set by the
- * user, look for a well known kernel symbol and derive the prefix from
- * there.  Otherwise set the prefix depending on whether uts_info
- * includes SMP or not for backwards compatibility.
- */
-static void set_ncv_prefix(char *prefix)
-{
-	static char derived_prefix[256];
-	static const char *well_known_symbol[] = { "get_module_symbol_R",
-						   "inter_module_get_R",
-						 };
-	struct module_symbol *s;
-	int i, j, l, m, pl;
-	const char *name;
-	char *p;
-
-	if (ncv_prefix)
-		return;
-
-	if (prefix)
-		ncv_prefix = prefix;
-	else {
-		/* Extract the prefix (if any) from well known symbols */
-		for (i = 0, s = ksyms; i < nksyms; ++i, ++s) {
-			name = (char *) s->name;
-			l = strlen(name);
-			for (j = 0; j < sizeof(well_known_symbol)/sizeof(well_known_symbol[0]); ++j) {
-				m = strlen(well_known_symbol[j]);
-				if (m + 8 > l ||
-				    strncmp(name, well_known_symbol[j], m))
-					continue;
-				pl = l - m - 8;
-				if (pl > sizeof(derived_prefix)-1)
-					continue;	/* Prefix is wrong length */
-				/* Must end with 8 hex digits */
-				(void) strtoul(name+l-8, &p, 16);
-				if (*p == 0) {
-					strncpy(derived_prefix, name+m, pl);
-					*(derived_prefix+pl) = '\0';
-					ncv_prefix = derived_prefix;
-					break;
-				}
-			}
-		}
-	}
-	if (!ncv_prefix) {
-		p = strchr(uts_info.version, ' ');
-		if (p && *(++p) && !strncmp(p, "SMP ", 4))
-			ncv_prefix = "smp_";
-		else
-			ncv_prefix = "";
-	}
-	ncv_plen = strlen(ncv_prefix);
-	if (flag_verbose)
-		lprintf("Symbol version prefix '%s'", ncv_prefix);
-}
-
-static int ncv_strcmp(const char *a, const char *b)
-{
-	size_t alen = strlen(a), blen = strlen(b);
-
-	if (blen == alen + 10 + ncv_plen &&
-	    b[alen] == '_' &&
-	    b[alen + 1] == 'R' &&
-	    !(ncv_plen && strncmp(b + alen + 2, ncv_prefix, ncv_plen))) {
-		return strncmp(a, b, alen);
-	} else if (alen == blen + 10 + ncv_plen &&
-		   a[blen] == '_' && a[blen + 1] == 'R' &&
-		   !(ncv_plen && strncmp(a + blen + 2, ncv_prefix, ncv_plen))) {
-		return strncmp(a, b, blen);
-	} else
-		return strcmp(a, b);
-}
-
-/*
- * String hashing for non-co-versioned kernel and module.
- * Here we are simply forced to drop the crc from the hash.
- */
-static unsigned long ncv_symbol_hash(const char *str)
-{
-	size_t len = strlen(str);
-
-	if (len > 10 + ncv_plen &&
-	    str[len - 10 - ncv_plen] == '_' &&
-	    str[len - 9 - ncv_plen] == 'R' &&
-	    !(
-	      ncv_plen &&
-	      strncmp(str + len - (8 + ncv_plen), ncv_prefix, ncv_plen)
-	     ))
-		len -= 10 + ncv_plen;
-	return obj_elf_hash_n(str, len);
-}
-
-/*
- * Conditionally add the symbols from the given symbol set
- * to the new module.
- */
-static int add_symbols_from(struct obj_file *f, int idx,
-			    struct module_symbol *syms, size_t nsyms, int gpl)
-{
-	struct module_symbol *s;
-	size_t i;
-	int used = 0;
-
-	for (i = 0, s = syms; i < nsyms; ++i, ++s) {
-		/*
-		 * Only add symbols that are already marked external.
-		 * If we override locals we may cause problems for
-		 * argument initialization.
-		 * We will also create a false dependency on the module.
-		 */
-		struct obj_symbol *sym;
-
-		/* GPL licensed modules can use symbols exported with
-		 * EXPORT_SYMBOL_GPL, so ignore any GPLONLY_ prefix on the
-		 * exported names.  Non-GPL modules never see any GPLONLY_
-		 * symbols so they cannot fudge it by adding the prefix on
-		 * their references.
-		 */
-		if (strncmp((char *)s->name, "GPLONLY_", 8) == 0) {
-			gplonly_seen = 1;
-			if (gpl)
-				((char *)s->name) += 8;
-			else
-				continue;
-		}
-
-		sym = obj_find_symbol(f, (char *) s->name);
-#ifdef	ARCH_ppc64
-		if (!sym)
-		  {
-		    static size_t buflen = 0;
-		    static char *buf = 0;
-		    int len;
-
-		    /* ppc64 is one of those architectures with
-		       function descriptors.  A function is exported
-		       and accessed across object boundaries via its
-		       function descriptor.  The function code symbol
-		       happens to be the function name, prefixed with
-		       '.', and a function call is a branch to the
-		       code symbol.  The linker recognises when a call
-		       crosses object boundaries, and inserts a stub
-		       to call via the function descriptor.
-		       obj_ppc64.c of course does the same thing, so
-		       here we recognise that an undefined code symbol
-		       can be satisfied by the corresponding function
-		       descriptor symbol.  */
-
-		    len = strlen ((char *) s->name) + 2;
-		    if (buflen < len)
-		      {
-			buflen = len + (len >> 1);
-			if (buf)
-			  free (buf);
-			buf = malloc (buflen);
-		      }
-		    buf[0] = '.';
-		    strcpy (buf + 1, (char *) s->name);
-		    sym = obj_find_symbol(f, buf);
-		  }
-#endif	/* ARCH_ppc64 */
-
-		if (sym && ELFW(ST_BIND) (sym->info) != STB_LOCAL) {
-			sym = obj_add_symbol(f, (char *) s->name, -1,
-				  ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-					     idx, s->value, 0);
-			/*
-			 * Did our symbol just get installed?
-			 * If so, mark the module as "used".
-			 */
-			if (sym->secidx == idx)
-				used = 1;
-		}
-	}
-
-	return used;
-}
-
-static void add_kernel_symbols(struct obj_file *f, int gpl)
-{
-	struct module_stat *m;
-	size_t i, nused = 0;
-
-	/* Add module symbols first.  */
-	for (i = 0, m = module_stat; i < n_module_stat; ++i, ++m)
-		if (m->nsyms &&
-		    add_symbols_from(f, SHN_HIRESERVE + 2 + i, m->syms, m->nsyms, gpl))
-			m->status = 1 /* used */, ++nused;
-	n_ext_modules_used = nused;
-
-	/* And finally the symbols from the kernel proper.  */
-	if (nksyms)
-		add_symbols_from(f, SHN_HIRESERVE + 1, ksyms, nksyms, gpl);
-}
-
-static void hide_special_symbols(struct obj_file *f)
-{
-	struct obj_symbol *sym;
-	const char *const *p;
-	static const char *const specials[] =
-	{
-		"cleanup_module",
-		"init_module",
-		"kernel_version",
-		NULL
-	};
-
-	for (p = specials; *p; ++p)
-		if ((sym = obj_find_symbol(f, *p)) != NULL)
-			sym->info = ELFW(ST_INFO) (STB_LOCAL, ELFW(ST_TYPE) (sym->info));
-}
-
-static void print_load_map(struct obj_file *f)
-{
-	struct obj_symbol *sym;
-	struct obj_symbol **all, **p;
-	struct obj_section *sec;
-	int load_map_cmp(const void *a, const void *b) {
-		struct obj_symbol **as = (struct obj_symbol **) a;
-		struct obj_symbol **bs = (struct obj_symbol **) b;
-		unsigned long aa = obj_symbol_final_value(f, *as);
-		unsigned long ba = obj_symbol_final_value(f, *bs);
-		 return aa < ba ? -1 : aa > ba ? 1 : 0;
-	}
-	int i, nsyms, *loaded;
-
-	/* Report on the section layout.  */
-
-	lprintf("Sections:       Size      %-*s  Align",
-		(int) (2 * sizeof(void *)), "Address");
-
-	for (sec = f->load_order; sec; sec = sec->load_next) {
-		int a;
-		unsigned long tmp;
-
-		for (a = -1, tmp = sec->header.sh_addralign; tmp; ++a)
-			tmp >>= 1;
-		if (a == -1)
-			a = 0;
-
-		lprintf("%-15s %08lx  %0*lx  2**%d",
-			sec->name,
-			(long)sec->header.sh_size,
-			(int) (2 * sizeof(void *)),
-			(long)sec->header.sh_addr,
-			a);
-	}
-
-	/* Quick reference which section indicies are loaded.  */
-
-	loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
-	while (--i >= 0)
-		loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
-	/* Collect the symbols we'll be listing.  */
-
-	for (nsyms = i = 0; i < HASH_BUCKETS; ++i)
-		for (sym = f->symtab[i]; sym; sym = sym->next)
-			if (sym->secidx <= SHN_HIRESERVE
-			    && (sym->secidx >= SHN_LORESERVE || loaded[sym->secidx]))
-				++nsyms;
-
-	all = alloca(nsyms * sizeof(struct obj_symbol *));
-
-	for (i = 0, p = all; i < HASH_BUCKETS; ++i)
-		for (sym = f->symtab[i]; sym; sym = sym->next)
-			if (sym->secidx <= SHN_HIRESERVE
-			    && (sym->secidx >= SHN_LORESERVE || loaded[sym->secidx]))
-				*p++ = sym;
-
-	/* Sort them by final value.  */
-	qsort(all, nsyms, sizeof(struct obj_file *), load_map_cmp);
-
-	/* And list them.  */
-	lprintf("\nSymbols:");
-	for (p = all; p < all + nsyms; ++p) {
-		char type = '?';
-		unsigned long value;
-
-		sym = *p;
-		if (sym->secidx == SHN_ABS) {
-			type = 'A';
-			value = sym->value;
-		} else if (sym->secidx == SHN_UNDEF) {
-			type = 'U';
-			value = 0;
-		} else {
-			struct obj_section *sec = f->sections[sym->secidx];
-
-			if (sec->header.sh_type == SHT_NOBITS)
-				type = 'B';
-			else if (sec->header.sh_flags & SHF_ALLOC) {
-				if (sec->header.sh_flags & SHF_EXECINSTR)
-					type = 'T';
-				else if (sec->header.sh_flags & SHF_WRITE)
-					type = 'D';
-				else
-					type = 'R';
-			}
-			value = sym->value + sec->header.sh_addr;
-		}
-
-		if (ELFW(ST_BIND) (sym->info) == STB_LOCAL)
-			type = tolower(type);
-
-		lprintf("%0*lx %c %s", (int) (2 * sizeof(void *)), value,
-			type, sym->name);
-	}
-}
-
-/************************************************************************/
-/* begin compat */
-
-static char * get_modinfo_value(struct obj_file *f, const char *key)
-{
-	struct obj_section *sec;
-	char *p, *v, *n, *ep;
-	size_t klen = strlen(key);
-
-	sec = obj_find_section(f, ".modinfo");
-	if (sec == NULL)
-		return NULL;
-
-	p = sec->contents;
-	ep = p + sec->header.sh_size;
-	while (p < ep) {
-		v = strchr(p, '=');
-		n = strchr(p, '\0');
-		if (v) {
-			if (v - p == klen && strncmp(p, key, klen) == 0)
-				return v + 1;
-		} else {
-			if (n - p == klen && strcmp(p, key) == 0)
-				return n;
-		}
-		p = n + 1;
-	}
-
-	return NULL;
-}
-
-static int create_this_module(struct obj_file *f, const char *m_name)
-{
-	struct obj_section *sec;
-
-	sec = obj_create_alloced_section_first(f, ".this", tgt_sizeof_long,
-					       sizeof(struct module));
-	memset(sec->contents, 0, sizeof(struct module));
-
-	obj_add_symbol(f, "__this_module", -1, ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT),
-		       sec->idx, 0, sizeof(struct module));
-
-	obj_string_patch(f, sec->idx, offsetof(struct module, name), m_name);
-
-	return 1;
-}
-
-#ifdef COMPAT_2_0
-static int old_create_mod_use_count(struct obj_file *f)
-{
-	struct obj_section *sec;
-	struct obj_symbol  *got;
-
-	sec = obj_create_alloced_section_first(f, ".moduse",
-					       sizeof(long), sizeof(long));
-
-	obj_add_symbol(f, "mod_use_count_",
-		       -1, ELFW(ST_INFO)(STB_LOCAL, STT_OBJECT),
-		       sec->idx, 0, sizeof(long));
-
-	/*
-	 * patb: if there is a _GLOBAL_OFFSET_TABLE_,
-	 * add .got section for PIC type modules;
-	 * we have to do this here, because obj_* calls are not made until
-	 * after obj_check_undefined
-	 * is there a better place for this exception?
-	 */
-	got = obj_find_symbol(f, "_GLOBAL_OFFSET_TABLE_");
-	if (got)
-	{
-		sec = obj_create_alloced_section(f, ".got",
-						 sizeof(long), sizeof(long),
-						 SHF_WRITE);
-		got->secidx = sec->idx; /* mark the symbol as defined */
-	}
-	return 1;
-}
-#endif
-
-/* add an entry to the __ksymtab section, creating it if necessary */
-static void add_ksymtab(struct obj_file *f, struct obj_symbol *sym)
-{
-	struct obj_section *sec;
-	ElfW(Addr) ofs;
-
-	/* ensure __ksymtab is allocated, EXPORT_NOSYMBOLS creates a non-alloc section.
-	 * If __ksymtab is defined but not marked alloc, x out the first character
-	 * (no obj_delete routine) and create a new __ksymtab with the correct
-	 * characteristics.
-	 */
-	sec = obj_find_section(f, "__ksymtab");
-	if (sec && !(sec->header.sh_flags & SHF_ALLOC)) {
-		*((char *)(sec->name)) = 'x';	/* override const */
-		sec = NULL;
-	}
-	if (!sec)
-		sec = obj_create_alloced_section(f, "__ksymtab",
-						 tgt_sizeof_void_p, 0, 0);
-	if (!sec)
-		return;
-	sec->header.sh_flags |= SHF_ALLOC;
-
-	ofs = sec->header.sh_size;
-	obj_symbol_patch(f, sec->idx, ofs, sym);
-	obj_string_patch(f, sec->idx, ofs + tgt_sizeof_void_p, sym->name);
-	obj_extend_section(sec, 2 * tgt_sizeof_char_p);
-}
-
-static int create_module_ksymtab(struct obj_file *f)
-{
-	struct obj_section *sec;
-	int i;
-
-	/* We must always add the module references.  */
-
-	if (n_ext_modules_used) {
-		struct module_ref *dep;
-		struct obj_symbol *tm;
-
-		sec = obj_create_alloced_section(f, ".kmodtab",
-			tgt_sizeof_void_p,
-			sizeof(struct module_ref) * n_ext_modules_used, 0);
-		if (!sec)
-			return 0;
-
-		tm = obj_find_symbol(f, "__this_module");
-		dep = (struct module_ref *) sec->contents;
-		for (i = 0; i < n_module_stat; ++i)
-			if (module_stat[i].status /* used */) {
-				dep->dep = module_stat[i].addr;
-#ifdef ARCH_ppc64
-				dep->dep |= ppc64_module_base (f);
-#endif
-				obj_symbol_patch(f, sec->idx, (char *) &dep->ref - sec->contents, tm);
-				dep->next_ref = 0;
-				++dep;
-			}
-	}
-	if (flag_export && !obj_find_section(f, "__ksymtab")) {
-		int *loaded;
-
-		/* We don't want to export symbols residing in sections that
-		   aren't loaded.  There are a number of these created so that
-		   we make sure certain module options don't appear twice.  */
-
-		loaded = alloca(sizeof(int) * (i = f->header.e_shnum));
-		while (--i >= 0)
-			loaded[i] = (f->sections[i]->header.sh_flags & SHF_ALLOC) != 0;
-
-		for (i = 0; i < HASH_BUCKETS; ++i) {
-			struct obj_symbol *sym;
-			for (sym = f->symtab[i]; sym; sym = sym->next) {
-				if (ELFW(ST_BIND) (sym->info) != STB_LOCAL
-				    && sym->secidx <= SHN_HIRESERVE
-				    && (sym->secidx >= SHN_LORESERVE
-					|| loaded[sym->secidx])) {
-					add_ksymtab(f, sym);
-				}
-			}
-		}
-	}
-	return 1;
-}
-
-/* Get the module's kernel version in the canonical integer form.  */
-static int get_module_version(struct obj_file *f, char str[STRVERSIONLEN])
-{
-	int a, b, c;
-	char *p, *q;
-
-	if ((p = get_modinfo_value(f, "kernel_version")) == NULL) {
-		struct obj_symbol *sym;
-
-		m_has_modinfo = 0;
-		if ((sym = obj_find_symbol(f, "kernel_version")) == NULL)
-			sym = obj_find_symbol(f, "__module_kernel_version");
-		if (sym == NULL)
-			return -1;
-		p = f->sections[sym->secidx]->contents + sym->value;
-	} else
-		m_has_modinfo = 1;
-
-	strncpy(str, p, STRVERSIONLEN-1);
-	str[STRVERSIONLEN-1] = '\0';
-	p = str;
-
-	a = strtoul(p, &p, 10);
-	if (*p != '.')
-		return -1;
-	b = strtoul(p + 1, &p, 10);
-	if (*p != '.')
-		return -1;
-	c = strtoul(p + 1, &q, 10);
-	if (p + 1 == q)
-		return -1;
-	use_numeric_only(a, b, q);
-
-	return a << 16 | b << 8 | c;
-}
-
-/* Return the kernel symbol checksum version, or zero if not used. */
-static int is_kernel_checksummed(void)
-{
-	struct module_symbol *s;
-	size_t i;
-
-	/*
-	 * Using_Versions might not be the first symbol,
-	 * but it should be in there.
-	 */
-	for (i = 0, s = ksyms; i < nksyms; ++i, ++s)
-		if (strcmp((char *) s->name, "Using_Versions") == 0)
-			return s->value;
-
-	return 0;
-}
-
-static int is_module_checksummed(struct obj_file *f)
-{
-	if (m_has_modinfo) {
-		const char *p = get_modinfo_value(f, "using_checksums");
-		if (p)
-			return atoi(p);
-		else
-			return 0;
-	} else
-		return obj_find_symbol(f, "Using_Versions") != NULL;
-}
-
-/* add module source, timestamp, kernel version and a symbol for the
- * start of some sections.  this info is used by ksymoops to do better
- * debugging.
- */
-static void add_ksymoops_symbols(struct obj_file *f, const char *filename,
-				 const char *m_name)
-{
-	struct obj_section *sec;
-	struct obj_symbol *sym;
-	char *name, *absolute_filename;
-	char str[STRVERSIONLEN], real[PATH_MAX];
-	int i, l, lm_name, lfilename, use_ksymtab, version;
-	struct stat statbuf;
-
-	static const char *section_names[] = {
-		".text",
-		".rodata",
-		".data",
-		".bss"
-	};
-
-	if (realpath(filename, real)) {
-		absolute_filename = xstrdup(real);
-	}
-	else {
-		int save_errno = errno;
-		error("cannot get realpath for %s", filename);
-		errno = save_errno;
-		perror("");
-		absolute_filename = xstrdup(filename);
-	}
-
-	lm_name = strlen(m_name);
-	lfilename = strlen(absolute_filename);
-
-	/* add to ksymtab if it already exists or there is no ksymtab and other symbols
-	 * are not to be exported.  otherwise leave ksymtab alone for now, the
-	 * "export all symbols" compatibility code will export these symbols later.
-	 */
-
-	use_ksymtab =  obj_find_section(f, "__ksymtab") || !flag_export;
-
-	if ((sec = obj_find_section(f, ".this"))) {
-		/* tag the module header with the object name, last modified
-		 * timestamp and module version.  worst case for module version
-		 * is 0xffffff, decimal 16777215.  putting all three fields in
-		 * one symbol is less readable but saves kernel space.
-		 */
-		l = sizeof(symprefix)+			/* "__insmod_" */
-		    lm_name+				/* module name */
-		    2+					/* "_O" */
-		    lfilename+				/* object filename */
-		    2+					/* "_M" */
-		    2*sizeof(statbuf.st_mtime)+		/* mtime in hex */
-		    2+					/* "_V" */
-		    8+					/* version in dec */
-		    1;					/* nul */
-		name = xmalloc(l);
-		if (stat(absolute_filename, &statbuf) != 0)
-			statbuf.st_mtime = 0;
-		version = get_module_version(f, str);	/* -1 if not found */
-		snprintf(name, l, "%s%s_O%s_M%0*lX_V%d",
-			 symprefix, m_name, absolute_filename,
-			 (int)(2*sizeof(statbuf.st_mtime)), statbuf.st_mtime,
-			 version);
-		sym = obj_add_symbol(f, name, -1,
-				     ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-				     sec->idx, sec->header.sh_addr, 0);
-		if (use_ksymtab)
-			add_ksymtab(f, sym);
-	}
-	free(absolute_filename);
-
-	/* record where the persistent data is going, same address as previous symbol */
-
-	if (f->persist) {
-		l = sizeof(symprefix)+		/* "__insmod_" */
-			lm_name+		/* module name */
-			2+			/* "_P" */
-			strlen(f->persist)+	/* data store */
-			1;			/* nul */
-		name = xmalloc(l);
-		snprintf(name, l, "%s%s_P%s",
-			 symprefix, m_name, f->persist);
-		sym = obj_add_symbol(f, name, -1, ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-				     sec->idx, sec->header.sh_addr, 0);
-		if (use_ksymtab)
-			add_ksymtab(f, sym);
-	}
-
-	/* tag the desired sections if size is non-zero */
-
-	for (i = 0; i < sizeof(section_names)/sizeof(section_names[0]); ++i) {
-		if ((sec = obj_find_section(f, section_names[i])) &&
-		    sec->header.sh_size) {
-			l = sizeof(symprefix)+		/* "__insmod_" */
-				lm_name+		/* module name */
-				2+			/* "_S" */
-				strlen(sec->name)+	/* section name */
-				2+			/* "_L" */
-				8+			/* length in dec */
-				1;			/* nul */
-			name = xmalloc(l);
-			snprintf(name, l, "%s%s_S%s_L%ld",
-				 symprefix, m_name, sec->name,
-				 (long)sec->header.sh_size);
-			sym = obj_add_symbol(f, name, -1, ELFW(ST_INFO) (STB_GLOBAL, STT_NOTYPE),
-					     sec->idx, sec->header.sh_addr, 0);
-			if (use_ksymtab)
-				add_ksymtab(f, sym);
-		}
-	}
-}
-
-static int process_module_arguments(struct obj_file *f, int argc, char **argv, int required)
-{
-	for (; argc > 0; ++argv, --argc) {
-		struct obj_symbol *sym;
-		int c;
-		int min, max;
-		int n;
-		char *contents;
-		char *input;
-		char *fmt;
-		char *key;
-		char *loc;
-
-		if ((input = strchr(*argv, '=')) == NULL)
-			continue;
-
-		n = input - *argv;
-		input += 1; /* skip '=' */
-
-		key = alloca(n + 6);
-
-		if (m_has_modinfo) {
-			memcpy(key, "parm_", 5);
-			memcpy(key + 5, *argv, n);
-			key[n + 5] = '\0';
-			if ((fmt = get_modinfo_value(f, key)) == NULL) {
-				if (required || flag_verbose) {
-					lprintf("Warning: ignoring %s, no such parameter in this module", *argv);
-					++warnings;
-					continue;
-				}
-			}
-			key += 5;
-
-			if (isdigit(*fmt)) {
-				min = strtoul(fmt, &fmt, 10);
-				if (*fmt == '-')
-					max = strtoul(fmt + 1, &fmt, 10);
-				else
-					max = min;
-			} else
-				min = max = 1;
-		} else { /* not m_has_modinfo */
-			memcpy(key, *argv, n);
-			key[n] = '\0';
-
-			if (isdigit(*input))
-				fmt = "i";
-			else
-				fmt = "s";
-			min = max = 0;
-		}
-
-		sym = obj_find_symbol(f, key);
-
-		/*
-		 * Also check that the parameter was not
-		 * resolved from the kernel.
-		 */
-		if (sym == NULL || sym->secidx > SHN_HIRESERVE) {
-			error("symbol for parameter %s not found", key);
-			return 0;
-		}
-
-		contents = f->sections[sym->secidx]->contents;
-		loc = contents + sym->value;
-		n = 1;
-
-		while (*input) {
-			char *str;
-
-			switch (*fmt) {
-			case 's':
-			case 'c':
-				/*
-				 * Do C quoting if we begin with a ",
-				 * else slurp the lot.
-				 */
-				if (*input == '"') {
-					char *r;
-
-					str = alloca(strlen(input));
-					for (r = str, input++; *input != '"'; ++input, ++r) {
-						if (*input == '\0') {
-							error("improperly terminated string argument for %s", key);
-							return 0;
-						}
-						/* else */
-						if (*input != '\\') {
-							*r = *input;
-							continue;
-						}
-						/* else  handle \ */
-						switch (*++input) {
-						case 'a': *r = '\a'; break;
-						case 'b': *r = '\b'; break;
-						case 'e': *r = '\033'; break;
-						case 'f': *r = '\f'; break;
-						case 'n': *r = '\n'; break;
-						case 'r': *r = '\r'; break;
-						case 't': *r = '\t'; break;
-
-						case '0':
-						case '1':
-						case '2':
-						case '3':
-						case '4':
-						case '5':
-						case '6':
-						case '7':
-							c = *input - '0';
-							if ('0' <= input[1] && input[1] <= '7') {
-								c = (c * 8) + *++input - '0';
-								if ('0' <= input[1] && input[1] <= '7')
-									c = (c * 8) + *++input - '0';
-							}
-							*r = c;
-							break;
-
-						default: *r = *input; break;
-						}
-					}
-					*r = '\0';
-					++input;
-				} else {
-					/*
-					 * The string is not quoted.
-					 * We will break it using the comma
-					 * (like for ints).
-					 * If the user wants to include commas
-					 * in a string, he just has to quote it
-					 */
-					char *r;
-
-					/* Search the next comma */
-					if ((r = strchr(input, ',')) != NULL) {
-						/*
-						 * Found a comma
-						 * Recopy the current field
-						 */
-						str = alloca(r - input + 1);
-						memcpy(str, input, r - input);
-						str[r - input] = '\0';
-						/* Keep next fields */
-						input = r;
-					} else {
-						/* last string */
-						str = input;
-						input = "";
-					}
-				}
-
-				if (*fmt == 's') {
-					/* Normal string */
-					obj_string_patch(f, sym->secidx, loc - contents, str);
-					loc += tgt_sizeof_char_p;
-				} else {
-					/* Array of chars (in fact, matrix !) */
-					long charssize;	/* size of each member */
-
-					/* Get the size of each member */
-					/* Probably we should do that outside the loop ? */
-					if (!isdigit(*(fmt + 1))) {
-						error("parameter type 'c' for %s must be followed by"
-						" the maximum size", key);
-						return 0;
-					}
-					charssize = strtoul(fmt + 1, (char **) NULL, 10);
-
-					/* Check length */
-					if (strlen(str) >= charssize-1) {
-						error("string too long for %s (max %ld)",
-						      key, charssize - 1);
-						return 0;
-					}
-					/* Copy to location */
-					strcpy((char *) loc, str);	/* safe, see check above */
-					loc += charssize;
-				}
-				/*
-				 * End of 's' and 'c'
-				 */
-				break;
-
-			case 'b':
-				*loc++ = strtoul(input, &input, 0);
-				break;
-
-			case 'h':
-				*(short *) loc = strtoul(input, &input, 0);
-				loc += tgt_sizeof_short;
-				break;
-
-			case 'i':
-				*(int *) loc = strtoul(input, &input, 0);
-				loc += tgt_sizeof_int;
-				break;
-
-			case 'l':
-				*(long *) loc = strtoul(input, &input, 0);
-				loc += tgt_sizeof_long;
-				break;
-
-			default:
-				error("unknown parameter type '%c' for %s",
-				      *fmt, key);
-				return 0;
-			}
-			/*
-			 * end of switch (*fmt)
-			 */
-
-			while (*input && isspace(*input))
-				++input;
-			if (*input == '\0')
-				break; /* while (*input) */
-			/* else */
-
-			if (*input == ',') {
-				if (max && (++n > max)) {
-					error("too many values for %s (max %d)", key, max);
-					return 0;
-				}
-				++input;
-				/* continue with while (*input) */
-			} else {
-				error("invalid argument syntax for %s: '%c'",
-				      key, *input);
-				return 0;
-			}
-		} /* end of while (*input) */
-
-		if (min && (n < min)) {
-			error("too few values for %s (min %d)", key, min);
-			return 0;
-		}
-	} /* end of for (;argc > 0;) */
-
-	return 1;
-}
-
-
-/* Add a kallsyms section if the kernel supports all symbols. */
-static int add_kallsyms(struct obj_file *f,
-			struct obj_section **module_kallsyms, int force_kallsyms)
-{
-	struct module_symbol *s;
-	struct obj_file *f_kallsyms;
-	struct obj_section *sec_kallsyms;
-	size_t i;
-	int l;
-	const char *p, *pt_R;
-	unsigned long start = 0, stop = 0;
-
-	for (i = 0, s = ksyms; i < nksyms; ++i, ++s) {
-		p = (char *)s->name;
-		pt_R = strstr(p, "_R");
-		if (pt_R)
-			l = pt_R - p;
-		else
-			l = strlen(p);
-		if (strncmp(p, "__start_" KALLSYMS_SEC_NAME, l) == 0)
-			start = s->value;
-		else if (strncmp(p, "__stop_" KALLSYMS_SEC_NAME, l) == 0)
-			stop = s->value;
-	}
-
-	if (start >= stop && !force_kallsyms)
-		return(0);
-
-	/* The kernel contains all symbols, do the same for this module. */
-
-	/* Add an empty kallsyms section to the module if necessary */
-	for (i = 0; i < f->header.e_shnum; ++i) {
-		if (strcmp(f->sections[i]->name, KALLSYMS_SEC_NAME) == 0) {
-			*module_kallsyms = f->sections[i];
-			break;
-		}
-	    }
-	if (!*module_kallsyms)
-		*module_kallsyms = obj_create_alloced_section(f, KALLSYMS_SEC_NAME, 0, 0, 0);
-
-	/* Size and populate kallsyms */
-	if (obj_kallsyms(f, &f_kallsyms))
-		return(1);
-	sec_kallsyms = f_kallsyms->sections[KALLSYMS_IDX];
-	(*module_kallsyms)->header.sh_addralign = sec_kallsyms->header.sh_addralign;
-	(*module_kallsyms)->header.sh_size = sec_kallsyms->header.sh_size;
-	free((*module_kallsyms)->contents);
-	(*module_kallsyms)->contents = sec_kallsyms->contents;
-	sec_kallsyms->contents = NULL;
-	obj_free(f_kallsyms);
-
-	return 0;
-}
-
-
-/* Add an arch data section if the arch wants it. */
-static int add_archdata(struct obj_file *f,
-			struct obj_section **sec)
-{
-	size_t i;
-
-	*sec = NULL;
-	/* Add an empty archdata section to the module if necessary */
-	for (i = 0; i < f->header.e_shnum; ++i) {
-		if (strcmp(f->sections[i]->name, ARCHDATA_SEC_NAME) == 0) {
-			*sec = f->sections[i];
-			break;
-		}
-	    }
-	if (!*sec)
-		*sec = obj_create_alloced_section(f, ARCHDATA_SEC_NAME, 16, 0, 0);
-
-	/* Size and populate archdata */
-	if (arch_archdata(f, *sec))
-		return(1);
-	return 0;
-}
-
-
-static int init_module(const char *m_name, struct obj_file *f,
-		       unsigned long m_size, const char *blob_name,
-		       unsigned int noload, unsigned int flag_load_map)
-{
-	struct module *module;
-	struct obj_section *sec;
-	void *image;
-	int ret = 0;
-	tgt_long m_addr;
-
-	sec = obj_find_section(f, ".this");
-	module = (struct module *) sec->contents;
-	m_addr = sec->header.sh_addr;
-
-	module->size_of_struct = sizeof(*module);
-	module->size = m_size;
-	module->flags = flag_autoclean ? NEW_MOD_AUTOCLEAN : 0;
-
-	sec = obj_find_section(f, "__ksymtab");
-	if (sec && sec->header.sh_size) {
-		module->syms = sec->header.sh_addr;
-		module->nsyms = sec->header.sh_size / (2 * tgt_sizeof_char_p);
-	}
-	if (n_ext_modules_used) {
-		sec = obj_find_section(f, ".kmodtab");
-		module->deps = sec->header.sh_addr;
-		module->ndeps = n_ext_modules_used;
-	}
-	module->init = obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
-	module->cleanup = obj_symbol_final_value(f,
-		obj_find_symbol(f, "cleanup_module"));
-
-	sec = obj_find_section(f, "__ex_table");
-	if (sec) {
-		module->ex_table_start = sec->header.sh_addr;
-		module->ex_table_end = sec->header.sh_addr + sec->header.sh_size;
-	}
-	sec = obj_find_section(f, ".text.init");
-	if (sec) {
-		module->runsize = sec->header.sh_addr - m_addr;
-	}
-	sec = obj_find_section(f, ".data.init");
-	if (sec) {
-		if (!module->runsize ||
-		    module->runsize > sec->header.sh_addr - m_addr)
-			module->runsize = sec->header.sh_addr - m_addr;
-	}
-	sec = obj_find_section(f, ARCHDATA_SEC_NAME);
-	if (sec && sec->header.sh_size) {
-		module->archdata_start = sec->header.sh_addr;
-		module->archdata_end = module->archdata_start + sec->header.sh_size;
-	}
-	sec = obj_find_section(f, KALLSYMS_SEC_NAME);
-	if (sec && sec->header.sh_size) {
-		module->kallsyms_start = sec->header.sh_addr;
-		module->kallsyms_end = module->kallsyms_start + sec->header.sh_size;
-	}
-	if (!arch_init_module(f, module))
-		return 0;
-
-	/*
-	 * Whew!  All of the initialization is complete.
-	 * Collect the final module image and give it to the kernel.
-	 */
-	image = xmalloc(m_size);
-	obj_create_image(f, image);
-
-	if (flag_load_map)
-		print_load_map(f);
-
-	if (blob_name) {
-		int fd, l;
-		fd = open(blob_name, O_WRONLY|O_CREAT|O_TRUNC, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH);
-		if (fd < 0) {
-			error("open %s failed %m", blob_name);
-			ret = -1;
-		}
-		else {
-			if ((l = write(fd, image, m_size)) != m_size) {
-				error("write %s failed %m", blob_name);
-				ret = -1;
-			}
-			close(fd);
-		}
-	}
-
-	if (ret == 0 && !noload) {
-		fflush(stdout);		/* Flush any debugging output */
-		ret = sys_init_module(m_name, (struct module *) image);
-		if (ret) {
-			error("init_module: %m");
-			lprintf("Hint: insmod errors can be caused by incorrect module parameters, "
-				"including invalid IO or IRQ parameters.\n"
-			        "      You may find more information in syslog or the output from dmesg");
-		}
-	}
-
-	free(image);
-
-	return ret == 0;
-}
-
-#ifdef COMPAT_2_0
-static int old_init_module(const char *m_name, struct obj_file *f,
-			   unsigned long m_size)
-{
-	char *image;
-	struct old_mod_routines routines;
-	struct old_symbol_table *symtab;
-	int ret;
-	int nsyms = 0, strsize = 0, total;
-
-	/* Create the symbol table */
-	/* Size things first... */
-	if (flag_export) {
-		int i;
-		for (i = 0; i < HASH_BUCKETS; ++i) {
-			struct obj_symbol *sym;
-
-			for (sym = f->symtab[i]; sym; sym = sym->next)
-				if (ELFW(ST_BIND) (sym->info) != STB_LOCAL &&
-				    sym->secidx <= SHN_HIRESERVE) {
-					sym->ksymidx = nsyms++;
-					strsize += strlen(sym->name) + 1;
-				}
-		}
-	}
-	total = (sizeof(struct old_symbol_table) +
-		 nsyms * sizeof(struct old_module_symbol) +
-		 n_ext_modules_used * sizeof(struct old_module_ref) +
-		 strsize);
-	symtab = xmalloc(total);
-	symtab->size = total;
-	symtab->n_symbols = nsyms;
-	symtab->n_refs = n_ext_modules_used;
-
-	if (flag_export && nsyms) {
-		struct old_module_symbol *ksym;
-		char *str;
-		int i;
-
-		ksym = symtab->symbol;
-		str = ((char *) ksym +
-		       nsyms * sizeof(struct old_module_symbol) +
-		       n_ext_modules_used * sizeof(struct old_module_ref));
-
-		for (i = 0; i < HASH_BUCKETS; ++i) {
-			struct obj_symbol *sym;
-			for (sym = f->symtab[i]; sym; sym = sym->next)
-				if (sym->ksymidx >= 0) {
-					ksym->addr = obj_symbol_final_value(f, sym);
-					ksym->name = (unsigned long) str - (unsigned long) symtab;
-
-					str = stpcpy(str, sym->name) + 1;
-					ksym++;
-				}
-		}
-	}
-
-	if (n_ext_modules_used) {
-		struct old_module_ref *ref;
-		int i;
-
-		ref = (struct old_module_ref *)
-		    ((char *) symtab->symbol + nsyms * sizeof(struct old_module_symbol));
-
-		for (i = 0; i < n_module_stat; ++i) {
-			if (module_stat[i].status /* used */) {
-				ref++->module = module_stat[i].modstruct;
-			}
-		}
-	}
-
-	/* Fill in routines.  */
-
-	routines.init = obj_symbol_final_value(f, obj_find_symbol(f, "init_module"));
-	routines.cleanup = obj_symbol_final_value(f,
-		obj_find_symbol(f, "cleanup_module"));
-
-	/*
-	 * Whew!  All of the initialization is complete.
-	 * Collect the final module image and give it to the kernel.
-	 */
-	image = xmalloc(m_size);
-	obj_create_image(f, image);
-
-	/*
-	 * image holds the complete relocated module,
-	 * accounting correctly for mod_use_count.
-	 * However the old module kernel support assume that it
-	 * is receiving something which does not contain mod_use_count.
-	 */
-	ret = old_sys_init_module(m_name, image + sizeof(long),
-				  (m_size - sizeof(long)) |
-				  (flag_autoclean ? OLD_MOD_AUTOCLEAN : 0),
-				  &routines,
-				  symtab);
-	if (ret)
-		error("init_module: %m");
-
-	free(image);
-	free(symtab);
-
-	return ret == 0;
-}
-#endif
-/* end compat */
-/************************************************************************/
-
-/* Check that a module parameter has a reasonable definition */
-static int check_module_parameter(struct obj_file *f, char *key, char *value, int *persist_flag)
-{
-	struct obj_symbol *sym;
-	int min, max;
-	char *p = value;
-
-	sym = obj_find_symbol(f, key);
-	if (sym == NULL) {
-		/* FIXME: For 2.2 kernel compatibility, only issue warnings for
-		 *        most error conditions.  Make these all errors in 2.5.
-		 */
-		lprintf("Warning: %s symbol for parameter %s not found", error_file, key);
-		++warnings;
-		return(1);
-	}
-
-	if (isdigit(*p)) {
-		min = strtoul(p, &p, 10);
-		if (*p == '-')
-			max = strtoul(p + 1, &p, 10);
-		else
-			max = min;
-	} else
-		min = max = 1;
-
-	if (max < min) {
-		lprintf("Warning: %s parameter %s has max < min!", error_file, key);
-		++warnings;
-		return(1);
-	}
-
-	switch (*p) {
-	case 'c':
-		if (!isdigit(p[1])) {
-			lprintf("%s parameter %s has no size after 'c'!", error_file, key);
-			++warnings;
-			return(1);
-		}
-		while (isdigit(p[1]))
-			++p;	/* swallow c array size */
-		break;
-	case 'b':	/* drop through */
-	case 'h':	/* drop through */
-	case 'i':	/* drop through */
-	case 'l':	/* drop through */
-	case 's':
-		break;
-	case '\0':
-		lprintf("%s parameter %s has no format character!", error_file, key);
-		++warnings;
-		return(1);
-	default:
-		lprintf("%s parameter %s has unknown format character '%c'", error_file, key, *p);
-		++warnings;
-		return(1);
-	}
-	switch (*++p) {
-	case 'p':
-		if (*(p-1) == 's') {
-			error("parameter %s is invalid persistent string", key);
-			return(1);
-		}
-		*persist_flag = 1;
-		break;
-	case '\0':
-		break;
-	default:
-		lprintf("%s parameter %s has unknown format modifier '%c'", error_file, key, *p);
-		++warnings;
-		return(1);
-	}
-	return(0);
-}
-
-/* Check that all module parameters have reasonable definitions */
-static void check_module_parameters(struct obj_file *f, int *persist_flag)
-{
-	struct obj_section *sec;
-	char *ptr, *value, *n, *endptr;
-	int namelen, err = 0;
-
-	sec = obj_find_section(f, ".modinfo");
-	if (sec == NULL) {
-		/* module does not support typed parameters */
-		return;
-	}
-
-	ptr = sec->contents;
-	endptr = ptr + sec->header.sh_size;
-	while (ptr < endptr && !err) {
-		value = strchr(ptr, '=');
-		n = strchr(ptr, '\0');
-		if (value) {
-			namelen = value - ptr;
-			if (namelen >= 5 && strncmp(ptr, "parm_", 5) == 0
-			    && !(namelen > 10 && strncmp(ptr, "parm_desc_", 10) == 0)) {
-				char *pname = xmalloc(namelen + 1);
-				strncpy(pname, ptr + 5, namelen - 5);
-				pname[namelen - 5] = '\0';
-				err = check_module_parameter(f, pname, value+1, persist_flag);
-				free(pname);
-			}
-		} else {
-			if (n - ptr >= 5 && strncmp(ptr, "parm_", 5) == 0) {
-				error("parameter %s found with no value", ptr);
-				err = 1;
-			}
-		}
-		ptr = n + 1;
-	}
-
-	if (err)
-		*persist_flag = 0;
-	return;
-}
-
-static void set_tainted(struct obj_file *f, int fd, int kernel_has_tainted,
-			int noload, int taint,
-			const char *text1, const char *text2)
-{
-	char buf[80];
-	int oldval;
-	static int first = 1;
-	if (fd < 0 && !kernel_has_tainted)
-		return;		/* New modutils on old kernel */
-	lprintf("Warning: loading %s will taint the kernel: %s%s",
-			f->filename, text1, text2);
-	++warnings;
-	if (first) {
-		lprintf("  See %s for information about tainted modules", TAINT_URL);
-		first = 0;
-	}
-	if (fd >= 0 && !noload) {
-		read(fd, buf, sizeof(buf)-1);
-		buf[sizeof(buf)-1] = '\0';
-		oldval = strtoul(buf, NULL, 10);
-		sprintf(buf, "%d\n", oldval | taint);
-		write(fd, buf, strlen(buf));
-	}
-}
-
-/* Check if loading this module will taint the kernel. */
-static void check_tainted_module(struct obj_file *f, int noload)
-{
-	static const char tainted_file[] = TAINT_FILENAME;
-	int fd, kernel_has_tainted;
-	const char *ptr;
-
-	if ((fd = open(tainted_file, O_RDWR)) < 0) {
-		if (errno == ENOENT)
-			kernel_has_tainted = 0;
-		else if (errno == EACCES)
-			kernel_has_tainted = 1;
-		else {
-			perror(tainted_file);
-			kernel_has_tainted = 0;
-		}
-	}
-	else
-		kernel_has_tainted = 1;
-
-	switch (obj_gpl_license(f, &ptr)) {
-	case 0:
-		break;
-	case 1:
-		set_tainted(f, fd, kernel_has_tainted, noload, TAINT_PROPRIETORY_MODULE, "no license", "");
-		break;
-	case 2:
-		/* The module has a non-GPL license so we pretend that the
-		 * kernel always has a taint flag to get a warning even on
-		 * kernels without the proc flag.
-		 */
-		set_tainted(f, fd, 1, noload, TAINT_PROPRIETORY_MODULE, "non-GPL license - ", ptr);
-		break;
-	default:
-		set_tainted(f, fd, 1, noload, TAINT_PROPRIETORY_MODULE, "Unexpected return from obj_gpl_license", "");
-		break;
-	}
-
-	if (flag_force_load)
-		set_tainted(f, fd, 1, noload, TAINT_FORCED_MODULE, "forced load", "");
-	if (fd >= 0)
-		close(fd);
-}
-
-/* For common 3264 code, only compile the usage message once, in the 64 bit version */
-#if defined(COMMON_3264) && defined(ONLY_32)
-extern void insmod_usage(void);		/* Use the copy in the 64 bit version */
-#else	/* Common 64 bit version or any non common code - compile usage routine */
-void insmod_usage(void)
-{
-	fputs("Usage:\n"
-	      "insmod [-fhkLmnpqrsSvVxXyYN] [-e persist_name] [-o module_name] [-O blob_name] [-P prefix] module [ symbol=value ... ]\n"
-	      "\n"
-	      "  module                Name of a loadable kernel module ('.o' can be omitted)\n"
-	      "  -f, --force           Force loading under wrong kernel version\n"
-	      "  -h, --help            Print this message\n"
-	      "  -k, --autoclean       Make module autoclean-able\n"
-	      "  -L, --lock            Prevent simultaneous loads of the same module\n"
-	      "  -m, --map             Generate load map (so crashes can be traced)\n"
-	      "  -n, --noload          Don't load, just show\n"
-	      "  -p, --probe           Probe mode; check if the module matches the kernel\n"
-	      "  -q, --quiet           Don't print unresolved symbols\n"
-	      "  -r, --root            Allow root to load modules not owned by root\n"
-	      "  -s, --syslog          Report errors via syslog\n"
-	      "  -S, --kallsyms        Force kallsyms on module\n"
-	      "  -v, --verbose         Verbose output\n"
-	      "  -V, --version         Show version\n"
-	      "  -x, --noexport        Do not export externs\n"
-	      "  -X, --export          Do export externs (default)\n"
-	      "  -y, --noksymoops      Do not add ksymoops symbols\n"
-	      "  -Y, --ksymoops        Do add ksymoops symbols (default)\n"
-	      "  -N, --numeric-only    Only check the numeric part of the kernel version\n"
-	      "  -e persist_name\n"
-	      "      --persist=persist_name Filename to hold any persistent data from the module\n"
-	      "  -o NAME, --name=NAME  Set internal module name to NAME\n"
-	      "  -O NAME, --blob=NAME  Save the object as a binary blob in NAME\n"
-	      "  -P PREFIX\n"
-	      "      --prefix=PREFIX   Prefix for kernel or module symbols\n"
-	      ,stderr);
-	exit(1);
-}
-#endif	/* defined(COMMON_3264) && defined(ONLY_32) */
-
-#if defined(COMMON_3264) && defined(ONLY_32)
-#define INSMOD_MAIN insmod_main_32	/* 32 bit version */
-#elif defined(COMMON_3264) && defined(ONLY_64)
-#define INSMOD_MAIN insmod_main_64	/* 64 bit version */
-#else
-#define INSMOD_MAIN insmod_main		/* Not common code */
-#endif
-
-int INSMOD_MAIN(int argc, char **argv)
-{
-	int k_version;
-	int k_crcs;
-	char k_strversion[STRVERSIONLEN];
-	struct option long_opts[] = {
-		{"force", 0, 0, 'f'},
-		{"help", 0, 0, 'h'},
-		{"autoclean", 0, 0, 'k'},
-		{"lock", 0, 0, 'L'},
-		{"map", 0, 0, 'm'},
-		{"noload", 0, 0, 'n'},
-		{"probe", 0, 0, 'p'},
-		{"poll", 0, 0, 'p'},	/* poll is deprecated, remove in 2.5 */
-		{"quiet", 0, 0, 'q'},
-		{"root", 0, 0, 'r'},
-		{"syslog", 0, 0, 's'},
-		{"kallsyms", 0, 0, 'S'},
-		{"verbose", 0, 0, 'v'},
-		{"version", 0, 0, 'V'},
-		{"noexport", 0, 0, 'x'},
-		{"export", 0, 0, 'X'},
-		{"noksymoops", 0, 0, 'y'},
-		{"ksymoops", 0, 0, 'Y'},
-		{"persist", 1, 0, 'e'},
-		{"numeric-only", 1, 0, 'N'},
-		{"name", 1, 0, 'o'},
-		{"blob", 1, 0, 'O'},
-		{"prefix", 1, 0, 'P'},
-		{0, 0, 0, 0}
-	};
-	char *m_name = NULL;
-	char *blob_name = NULL;		/* Save object as binary blob */
-	int m_version;
-	ElfW(Addr) m_addr;
-	unsigned long m_size;
-	int m_crcs;
-	char m_strversion[STRVERSIONLEN];
-	char *filename;
-	char *persist_name = NULL;	/* filename to hold any persistent data */
-	int fp;
-	struct obj_file *f;
-	struct obj_section *kallsyms = NULL, *archdata = NULL;
-	int o;
-	int noload = 0;
-	int dolock = 1; /*Note: was: 0; */
-	int quiet = 0;
-	int exit_status = 1;
-	int force_kallsyms = 0;
-	int persist_parms = 0;	/* does module have persistent parms? */
-	int i;
-	int gpl;
-
-	error_file = "insmod";
-
-	/* To handle repeated calls from combined modprobe */
-	errors = optind = 0;
-
-	/* Process the command line.  */
-	while ((o = getopt_long(argc, argv, "fhkLmnpqrsSvVxXyYNe:o:O:P:R:",
-				&long_opts[0], NULL)) != EOF)
-		switch (o) {
-		case 'f':	/* force loading */
-			flag_force_load = 1;
-			break;
-		case 'h':       /* Print the usage message. */
-			insmod_usage();
-			break;
-		case 'k':	/* module loaded by kerneld, auto-cleanable */
-			flag_autoclean = 1;
-			break;
-		case 'L':	/* protect against recursion.  */
-			dolock = 1;
-			break;
-		case 'm':	/* generate load map */
-			flag_load_map = 1;
-			break;
-		case 'n':	/* don't load, just check */
-			noload = 1;
-			break;
-		case 'p':	/* silent probe mode */
-			flag_silent_probe = 1;
-			break;
-		case 'q':	/* Don't print unresolved symbols */
-			quiet = 1;
-			break;
-		case 'r':	/* allow root to load non-root modules */
-			root_check_off = !root_check_off;
-			break;
-		case 's':	/* start syslog */
-			setsyslog("insmod");
-			break;
-		case 'S':	/* Force kallsyms */
-			force_kallsyms = 1;
-			break;
-		case 'v':	/* verbose output */
-			flag_verbose = 1;
-			break;
-		case 'V':
-			fputs("insmod version " MODUTILS_VERSION "\n", stderr);
-			break;
-		case 'x':	/* do not export externs */
-			flag_export = 0;
-			break;
-		case 'X':	/* do export externs */
-			flag_export = 1;
-			break;
-		case 'y':	/* do not define ksymoops symbols */
-			flag_ksymoops = 0;
-			break;
-		case 'Y':	/* do define ksymoops symbols */
-			flag_ksymoops = 1;
-			break;
-		case 'N':	/* only check numeric part of kernel version */
-			flag_numeric_only = 1;
-			break;
-
-		case 'e':	/* persistent data filename */
-			free(persist_name);
-			persist_name = xstrdup(optarg);
-			break;
-		case 'o':	/* name the output module */
-			m_name = optarg;
-			break;
-		case 'O':	/* save the output module object */
-			blob_name = optarg;
-			break;
-		case 'P':	/* use prefix on crc */
-			set_ncv_prefix(optarg);
-			break;
-
-		default:
-			insmod_usage();
-			break;
-		}
-
-	if (optind >= argc) {
-		insmod_usage();
-	}
-	filename = argv[optind++];
-
-	if (config_read(0, NULL, "", NULL) < 0) {
-		error("Failed handle configuration");
-	}
-
-	if (persist_name && !*persist_name &&
-	    (!persistdir || !*persistdir)) {
-		free(persist_name);
-		persist_name = NULL;
-		if (flag_verbose) {
-			lprintf("insmod: -e \"\" ignored, no persistdir");
-			++warnings;
-	}
-	}
-
-	if (m_name == NULL) {
-		size_t len;
-		char *p;
-
-		if ((p = strrchr(filename, '/')) != NULL)
-			p++;
-		else
-			p = filename;
-		len = strlen(p);
-		if (len > 2 && p[len - 2] == '.' && p[len - 1] == 'o')
-			len -= 2;
-		else if (len > 4 && p[len - 4] == '.' && p[len - 3] == 'm'
-			 && p[len - 2] == 'o' && p[len - 1] == 'd')
-			len -= 4;
-#ifdef CONFIG_USE_ZLIB
-		else if (len > 5 && !strcmp(p + len - 5, ".o.gz"))
-			len -= 5;
-#endif
-
-		m_name = xmalloc(len + 1);
-		memcpy(m_name, p, len);
-		m_name[len] = '\0';
-	}
-
-	/* Locate the file to be loaded.  */
-	if (!strchr(filename, '/') && !strchr(filename, '.')) {
-		char *tmp = search_module_path(filename);
-		if (tmp == NULL) {
-			error("%s: no module by that name found", filename);
-			return 1;
-		}
-		filename = tmp;
-		lprintf("Using %s", filename);
-	} else if (flag_verbose)
-		lprintf("Using %s", filename);
-
-	/* And open it.  */
-	if ((fp = gzf_open(filename, O_RDONLY)) == -1) {
-		error("%s: %m", filename);
-		return 1;
-	}
-	/* Try to prevent multiple simultaneous loads.  */
-	if (dolock)
-		flock(fp, LOCK_EX);
-
-	if (!get_kernel_info(K_SYMBOLS))
-		goto out;
-
-	/*
-	 * Set the genksyms prefix if this is a versioned kernel
-	 * and it's not already set.
-	 */
-	set_ncv_prefix(NULL);
-
-	for (i = 0; !noload && i < n_module_stat; ++i) {
-		if (strcmp(module_stat[i].name, m_name) == 0) {
-			error("a module named %s already exists", m_name);
-			goto out;
-		}
-	}
-
-	error_file = filename;
-	if ((f = obj_load(fp, ET_REL, filename)) == NULL)
-		goto out;
-
-	/* Version correspondence?  */
-	k_version = get_kernel_version(k_strversion);
-	m_version = get_module_version(f, m_strversion);
-	if (m_version == -1) {
-		error("couldn't find the kernel version the module was compiled for");
-		goto out;
-	}
-
-	k_crcs = is_kernel_checksummed();
-	m_crcs = is_module_checksummed(f);
-	if ((m_crcs == 0 || k_crcs == 0) &&
-	    strncmp(k_strversion, m_strversion, STRVERSIONLEN) != 0) {
-		if (flag_force_load) {
-			lprintf("Warning: kernel-module version mismatch\n"
-			      "\t%s was compiled for kernel version %s\n"
-				"\twhile this kernel is version %s",
-				filename, m_strversion, k_strversion);
-			++warnings;
-		} else {
-			if (!quiet)
-				error("kernel-module version mismatch\n"
-				      "\t%s was compiled for kernel version %s\n"
-				      "\twhile this kernel is version %s.",
-				      filename, m_strversion, k_strversion);
-			goto out;
-		}
-	}
-	if (m_crcs != k_crcs)
-		obj_set_symbol_compare(f, ncv_strcmp, ncv_symbol_hash);
-
-	/* Let the module know about the kernel symbols.  */
-	gpl = obj_gpl_license(f, NULL) == 0;
-	add_kernel_symbols(f, gpl);
-
-#ifdef	ARCH_ppc64
-	if (!ppc64_process_syms (f))
-		goto out;
-#endif
-
-	/* Allocate common symbols, symbol tables, and string tables.
-	 *
-	 * The calls marked DEPMOD indicate the bits of code that depmod
-	 * uses to do a pseudo relocation, ignoring undefined symbols.
-	 * Any changes made to the relocation sequence here should be
-	 * checked against depmod.
-	 */
-#ifdef COMPAT_2_0
-	if (k_new_syscalls
-	    ? !create_this_module(f, m_name)
-	    : !old_create_mod_use_count(f))
-		goto out;
-#else
-	if (!create_this_module(f, m_name))
-		goto out;
-#endif
-
-	arch_create_got(f);     /* DEPMOD */
-	if (!obj_check_undefineds(f, quiet)) {	/* DEPMOD, obj_clear_undefineds */
-		if (!gpl && !quiet) {
-			if (gplonly_seen)
-				error("\n"
-				      "Hint: You are trying to load a module without a GPL compatible license\n"
-				      "      and it has unresolved symbols.  The module may be trying to access\n"
-				      "      GPLONLY symbols but the problem is more likely to be a coding or\n"
-				      "      user error.  Contact the module supplier for assistance, only they\n"
-				      "      can help you.\n");
-			else
-				error("\n"
-				      "Hint: You are trying to load a module without a GPL compatible license\n"
-				      "      and it has unresolved symbols.  Contact the module supplier for\n"
-				      "      assistance, only they can help you.\n");
-		}
-		goto out;
-	}
-	obj_allocate_commons(f);	/* DEPMOD */
-
-	check_module_parameters(f, &persist_parms);
-	check_tainted_module(f, noload);
-
-	if (optind < argc) {
-		if (!process_module_arguments(f, argc - optind, argv + optind, 1))
-			goto out;
-	}
-	hide_special_symbols(f);
-
-	if (persist_parms && persist_name && *persist_name) {
-		f->persist = persist_name;
-		persist_name = NULL;
-	}
-
-	if (persist_parms &&
-	    persist_name && !*persist_name) {
-		/* -e "".  This is ugly.  Take the filename, compare it against
-		 * each of the module paths until we find a match on the start
-		 * of the filename, assume the rest is the relative path.  Have
-		 * to do it this way because modprobe uses absolute filenames
-		 * for module names in modules.dep and the format of modules.dep
-		 * does not allow for any backwards compatible changes, so there
-		 * is nowhere to store the relative filename.  The only way this
-		 * should fail to calculate a relative path is "insmod ./xxx", for
-		 * that case the user has to specify -e filename.
-		 */
-		int j, l = strlen(filename);
-		char *relative = NULL;
-		char *p;
-		for (i = 0; i < nmodpath; ++i) {
-			p = modpath[i].path;
-			j = strlen(p);
-			while (j && p[j] == '/')
-				--j;
-			if (j < l && strncmp(filename, p, j) == 0 && filename[j] == '/') {
-				while (filename[j] == '/')
-					++j;
-				relative = xstrdup(filename+j);
-				break;
-			}
-		}
-		if (relative) {
-			i = strlen(relative);
-			if (i > 3 && strcmp(relative+i-3, ".gz") == 0)
-				relative[i -= 3] = '\0';
-			if (i > 2 && strcmp(relative+i-2, ".o") == 0)
-				relative[i -= 2] = '\0';
-			else if (i > 4 && strcmp(relative+i-4, ".mod") == 0)
-				relative[i -= 4] = '\0';
-			f->persist = xmalloc(strlen(persistdir) + 1 + i + 1);
-			strcpy(f->persist, persistdir);	/* safe, xmalloc */
-			strcat(f->persist, "/");	/* safe, xmalloc */
-			strcat(f->persist, relative);	/* safe, xmalloc */
-			free(relative);
-		}
-		else
-			error("Cannot calculate persistent filename");
-	}
-
-	if (f->persist && *(f->persist) != '/') {
-		error("Persistent filenames must be absolute, ignoring '%s'",
-			f->persist);
-		free(f->persist);
-		f->persist = NULL;
-	}
-
-	if (f->persist && !flag_ksymoops) {
-		error("has persistent data but ksymoops symbols are not available");
-		free(f->persist);
-		f->persist = NULL;
-	}
-
-	if (f->persist && !k_new_syscalls) {
-		error("has persistent data but the kernel is too old to support it");
-		free(f->persist);
-		f->persist = NULL;
-	}
-
-	if (persist_parms && flag_verbose) {
-		if (f->persist)
-			lprintf("Persist filename '%s'", f->persist);
-		else
-			lprintf("No persistent filename available");
-	}
-
-	if (f->persist) {
-		FILE *fp = fopen(f->persist, "r");
-		if (!fp) {
-			if (flag_verbose)
-				lprintf("Cannot open persist file '%s' %m", f->persist);
-		}
-		else {
-			int pargc = 0;
-			char *pargv[1000];	/* hard coded but big enough */
-			char line[3000];	/* hard coded but big enough */
-			char *p;
-			while (fgets(line, sizeof(line), fp)) {
-				p = strchr(line, '\n');
-				if (!p) {
-					error("Persistent data line is too long\n%s", line);
-					break;
-				}
-				*p = '\0';
-				p = line;
-				while (isspace(*p))
-					++p;
-				if (!*p || *p == '#')
-					continue;
-				if (pargc == sizeof(pargv)/sizeof(pargv[0])) {
-					error("More than %d persistent parameters", pargc);
-					break;
-				}
-				pargv[pargc++] = xstrdup(p);
-			}
-			fclose(fp);
-			if (!process_module_arguments(f, pargc, pargv, 0))
-				goto out;
-			while (pargc--)
-				free(pargv[pargc]);
-		}
-	}
-
-	if (flag_ksymoops)
-		add_ksymoops_symbols(f, filename, m_name);
-
-	if (k_new_syscalls)
-		create_module_ksymtab(f);
-
-	/* archdata based on relocatable addresses */
-	if (add_archdata(f, &archdata))
-		goto out;
-
-	/* kallsyms based on relocatable addresses */
-	if (add_kallsyms(f, &kallsyms, force_kallsyms))
-		goto out;
-	/**** No symbols or sections to be changed after kallsyms above ***/
-
-	if (errors)
-		goto out;
-
-	/* If we were just checking, we made it.  */
-	if (flag_silent_probe) {
-		exit_status = 0;
-		goto out;
-	}
-	/* Module has now finished growing; find its size and install it.  */
-	m_size = obj_load_size(f);	/* DEPMOD */
-
-	if (noload) {
-		/* Don't bother actually touching the kernel.  */
-		m_addr = 0x12340000;
-	} else {
-		errno = 0;
-		m_addr = create_module(m_name, m_size);
-#ifdef	ARCH_ppc64
-		m_addr |= ppc64_module_base (f);
-#endif
-		switch (errno) {
-		case 0:
-			break;
-		case EEXIST:
-			if (dolock) {
-				/*
-				 * Assume that we were just invoked
-				 * simultaneous with another insmod
-				 * and return success.
-				 */
-				exit_status = 0;
-				goto out;
-			}
-			error("a module named %s already exists", m_name);
-			goto out;
-		case ENOMEM:
-			error("can't allocate kernel memory for module; needed %lu bytes",
-			      m_size);
-			goto out;
-		default:
-			error("create_module: %m");
-			goto out;
-		}
-	}
-
-	/* module is already built, complete with ksymoops symbols for the
-	 * persistent filename.  If the kernel does not support persistent data
-	 * then give an error but continue.  It is too difficult to clean up at
-	 * this stage and this error will only occur on backported modules.
-	 * rmmod will also get an error so warn the user now.
-	 */
-	if (f->persist && !noload) {
-		struct {
-			struct module m;
-			int data;
-		} test_read;
-		memset(&test_read, 0, sizeof(test_read));
-		test_read.m.size_of_struct = -sizeof(test_read.m);      /* -ve size => read, not write */
-		test_read.m.read_start = m_addr + sizeof(struct module);
-		test_read.m.read_end = test_read.m.read_start + sizeof(test_read.data);
-		if (sys_init_module(m_name, (struct module *) &test_read)) {
-			int old_errors = errors;
-			error("has persistent data but the kernel is too old to support it."
-				"  Expect errors during rmmod as well");
-			errors = old_errors;
-		}
-	}
-
-	if (!obj_relocate(f, m_addr)) {	/* DEPMOD */
-		if (!noload)
-			delete_module(m_name);
-		goto out;
-	}
-
-	/* Do archdata again, this time we have the final addresses */
-	if (add_archdata(f, &archdata))
-		goto out;
-
-	/* Do kallsyms again, this time we have the final addresses */
-	if (add_kallsyms(f, &kallsyms, force_kallsyms))
-		goto out;
-
-#ifdef COMPAT_2_0
-	if (k_new_syscalls)
-		init_module(m_name, f, m_size, blob_name, noload, flag_load_map);
-	else if (!noload)
-		old_init_module(m_name, f, m_size);
-#else
-	init_module(m_name, f, m_size, blob_name, noload, flag_load_map);
-#endif
-	if (errors) {
-		if (!noload)
-			delete_module(m_name);
-		goto out;
-	}
-	if (warnings && !noload)
-		lprintf("Module %s loaded, with warnings", m_name);
-	exit_status = 0;
-
-      out:
-	if (dolock)
-		flock(fp, LOCK_UN);
-	close(fp);
-	if (!noload)
-		snap_shot(NULL, 0);
-
-	return exit_status;
-}
-
-/* For common 3264 code, add an overall insmod_main, in the 64 bit version. */
-#if defined(COMMON_3264) && defined(ONLY_64)
-int insmod_main(int argc, char **argv)
-{
-	if (arch64())
-		return insmod_main_64(argc, argv);
-	else
-		return insmod_main_32(argc, argv);
-}
-#endif	/* defined(COMMON_3264) && defined(ONLY_64) */
-
-
-int insmod_call(char * full_filename, char * params)
-{
-	int argc = 2;
-	char *argv[50];
-	char * ptr = params;
-	argv[0] = "stage1";
-	argv[1] = full_filename;
-
-	while (ptr != NULL) {
-		argv[argc] = ptr;
-		argc++;
-		ptr = strchr(ptr, ' ');
-		if (ptr) {
-			ptr[0] = '\0';
-			ptr++;
-		}
-	}
-
-	return insmod_main(argc, argv);
-}
diff --git a/mdk-stage1/insmod-modutils/obj/Makefile b/mdk-stage1/insmod-modutils/obj/Makefile
deleted file mode 100644
index d44b2a6c6..000000000
--- a/mdk-stage1/insmod-modutils/obj/Makefile
+++ /dev/null
@@ -1,38 +0,0 @@
- #******************************************************************************
- #
- #    insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-all: libobj.a
-
-clean:
-	rm -f *.o *.a
-
-
-INCS = -I./../include
-
-DEFS = -D_GNU_SOURCE -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH) -DCONFIG_ROOT_CHECK_OFF=0
-
-ifeq (x86_64, $(ARCH))
-DEFS += -Wno-error
-endif
-
-OBJS = obj_kallsyms.o obj_common.o obj_load.o obj_reloc.o obj_$(ARCH).o \
-       obj_gpl_license.o
-
-libobj.a: $(OBJS)
-	ar cru $@ $^
-	ranlib $@
-
-%.o: %.c
-	$(DIET) gcc $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -c $<
diff --git a/mdk-stage1/insmod-modutils/obj/obj_alpha.c b/mdk-stage1/insmod-modutils/obj/obj_alpha.c
deleted file mode 100644
index 175012716..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_alpha.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/* Alpha specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/* This relocation got renamed, and the change hasn't propagated yet.  */
-#ifndef R_ALPHA_GPREL16
-#define R_ALPHA_GPREL16  R_ALPHA_IMMED_GP_16
-#endif
-
-/*======================================================================*/
-
-struct alpha_got_entry
-{
-  struct alpha_got_entry *next;
-  ElfW(Addr) addend;
-  int offset;
-  int reloc_done;
-};
-
-struct alpha_file
-{
-  struct obj_file root;
-  struct obj_section *got;
-};
-
-struct alpha_symbol
-{
-  struct obj_symbol root;
-  struct alpha_got_entry *got_entries;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct alpha_file *f;
-  f = xmalloc(sizeof(*f));
-  f->got = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct alpha_symbol *sym;
-  sym = xmalloc(sizeof(*sym));
-  sym->got_entries = NULL;
-  return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf64_Rela *rel,
-		       Elf64_Addr v)
-{
-  struct alpha_file *af = (struct alpha_file *)f;
-  struct alpha_symbol *asym = (struct alpha_symbol *)sym;
-
-  unsigned long *lloc = (unsigned long *)(targsec->contents + rel->r_offset);
-  unsigned int *iloc = (unsigned int *)lloc;
-  unsigned short *sloc = (unsigned short *)lloc;
-  Elf64_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  Elf64_Addr gp = af->got->header.sh_addr + 0x8000;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF64_R_TYPE(rel->r_info))
-    {
-    case R_ALPHA_NONE:
-    case R_ALPHA_LITUSE:
-      break;
-
-    case R_ALPHA_REFQUAD:
-      *lloc += v;
-      break;
-
-    case R_ALPHA_GPREL16:
-      v -= gp;
-      if ((Elf64_Sxword)v > 0x7fff
-	  || (Elf64_Sxword)v < -(Elf64_Sxword)0x8000)
-	ret = obj_reloc_overflow;
-      *sloc = v;
-      break;
-
-    case R_ALPHA_GPRELLOW:
-      /* GPRELLOW does not overflow.  Errors are seen in the
-	 corresponding GPRELHIGH.  */
-      v -= gp;
-      *sloc = v;
-      break;
-
-    case R_ALPHA_GPRELHIGH:
-      v -= gp;
-      v = ((Elf64_Sxword)v >> 16) + ((v >> 15) & 1);
-      if ((Elf64_Sxword)v > 0x7fff
-	  || (Elf64_Sxword)v < -(Elf64_Sxword)0x8000)
-	ret = obj_reloc_overflow;
-      *sloc = v;
-      break;
-
-    case R_ALPHA_GPREL32:
-      v -= gp;
-      if ((Elf64_Sxword)v > 0x7fffffff
-	  || (Elf64_Sxword)v < -(Elf64_Sxword)0x80000000)
-	ret = obj_reloc_overflow;
-      *iloc = v;
-      break;
-
-    case R_ALPHA_LITERAL:
-      {
-	struct alpha_got_entry *gotent;
-
-	assert(asym != NULL);
-	gotent = asym->got_entries;
-	while (gotent->addend != rel->r_addend)
-	  gotent = gotent->next;
-
-	if (!gotent->reloc_done)
-	  {
-	    *(unsigned long *)(af->got->contents + gotent->offset) = v;
-	    gotent->reloc_done = 1;
-	  }
-
-	*sloc = gotent->offset - 0x8000;
-      }
-    break;
-
-    case R_ALPHA_GPDISP:
-      {
-	unsigned int *p_ldah, *p_lda;
-	unsigned int i_ldah, i_lda, hi, lo;
-
-	p_ldah = iloc;
-	p_lda = (unsigned int *)((char *)iloc + rel->r_addend);
-	i_ldah = *p_ldah;
-	i_lda = *p_lda;
-
-	/* Make sure the instructions are righteous.  */
-	if ((i_ldah >> 26) != 9 || (i_lda >> 26) != 8)
-	  ret = obj_reloc_dangerous;
-
-	/* Extract the existing addend.  */
-	v = (i_ldah & 0xffff) << 16 | (i_lda & 0xffff);
-	v = (v ^ 0x80008000) - 0x80008000;
-
-	v += gp - dot;
-
-	if ((Elf64_Sxword)v >= 0x7fff8000
-	    || (Elf64_Sxword)v < -(Elf64_Sxword)0x80000000)
-	  ret = obj_reloc_overflow;
-
-	/* Modify the instructions and finish up.  */
-	lo = v & 0xffff;
-	hi = ((v >> 16) + ((v >> 15) & 1)) & 0xffff;
-
-	*p_ldah = (i_ldah & 0xffff0000) | hi;
-	*p_lda = (i_lda & 0xffff0000) | lo;
-      }
-    break;
-
-    case R_ALPHA_BRADDR:
-      v -= dot + 4;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      else if ((Elf64_Sxword)v > 0x3fffff
-	       || (Elf64_Sxword)v < -(Elf64_Sxword)0x400000)
-	ret = obj_reloc_overflow;
-      v /= 4;
-
-      *iloc = (*iloc & ~0x1fffff) | (v & 0x1fffff);
-      break;
-
-    case R_ALPHA_HINT:
-      v -= dot + 4;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      v /= 4;
-
-      *iloc = (*iloc & ~0x3fff) | (v & 0x3fff);
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct alpha_file *af = (struct alpha_file *)f;
-  int i, n, offset = 0;
-
-  n = af->root.header.e_shnum;
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *strsec;
-      Elf64_Rela *rel, *relend;
-      Elf64_Sym *symtab;
-      const char *strtab;
-
-      relsec = af->root.sections[i];
-      if (relsec->header.sh_type != SHT_RELA)
-	continue;
-
-      symsec = af->root.sections[relsec->header.sh_link];
-      strsec = af->root.sections[symsec->header.sh_link];
-
-      rel = (Elf64_Rela *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
-      symtab = (Elf64_Sym *)symsec->contents;
-      strtab = (const char *)strsec->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  struct alpha_got_entry *ent;
-	  struct alpha_symbol *intsym;
-
-	  if (ELF64_R_TYPE(rel->r_info) != R_ALPHA_LITERAL)
-	    continue;
-
-	  obj_find_relsym(intsym, f, &af->root, rel, symtab, strtab);
-
-	  for (ent = intsym->got_entries; ent ; ent = ent->next)
-	    if (ent->addend == rel->r_addend)
-	      goto found;
-
-	  ent = xmalloc(sizeof(*ent));
-	  ent->addend = rel->r_addend;
-	  ent->offset = offset;
-	  ent->reloc_done = 0;
-	  ent->next = intsym->got_entries;
-	  intsym->got_entries = ent;
-	  offset += 8;
-
-	found:;
-	}
-    }
-
-  if (offset > 0x10000)
-    {
-      error(".got section overflow: %#x > 0x10000", offset);
-      return 0;
-    }
-
-  /* We always want a .got section so that we always have a GP for
-     use with GPDISP and GPREL relocs.  Besides, if the section
-     is empty we don't use up space anyway.  */
-  af->got = obj_create_alloced_section(&af->root, ".got", 8, offset,
-				       SHF_WRITE | SHF_ALPHA_GPREL);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  struct alpha_file *af = (struct alpha_file *)f;
-
-  mod->gp = af->got->header.sh_addr + 0x8000;
-
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_arm.c b/mdk-stage1/insmod-modutils/obj/obj_arm.c
deleted file mode 100644
index 78b53700c..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_arm.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/* ARM specific support for Elf loading and relocation.
-   Copyright 1996, 1997, 1998 Linux International.
-
-   Contributed by Phil Blundell <philb@gnu.org>
-   and wms <woody@corelcomputer.com>
-   based on the i386 code by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct arm_plt_entry
-{
-  int offset;
-  int allocated:1;
-  int inited:1;                // has been set up
-};
-
-struct arm_got_entry
-{
-  int offset;
-  int allocated : 1;
-  unsigned reloc_done : 1;
-};
-
-struct arm_file
-{
-  struct obj_file root;
-  struct obj_section *plt;
-  struct obj_section *got;
-};
-
-struct arm_symbol
-{
-  struct obj_symbol root;
-  struct arm_plt_entry pltent;
-  struct arm_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct arm_file *f;
-  f = xmalloc(sizeof(*f));
-  f->got = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct arm_symbol *sym;
-  sym = xmalloc(sizeof(*sym));
-  memset(&sym->gotent, 0, sizeof(sym->gotent));
-  memset(&sym->pltent, 0, sizeof(sym->pltent));
-  return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rel *rel,
-		       Elf32_Addr v)
-{
-  struct arm_file *afile = (struct arm_file *)f;
-  struct arm_symbol *asym  = (struct arm_symbol *)sym;
-
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  Elf32_Addr got = afile->got ? afile->got->header.sh_addr : 0;
-  Elf32_Addr plt = afile->plt ? afile->plt->header.sh_addr : 0;
-
-  struct arm_plt_entry *pe;
-  unsigned long *ip;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_ARM_NONE:
-      break;
-
-    case R_ARM_ABS32:
-      *loc += v;
-      break;
-
-    case R_ARM_GOT32:
-      /* needs an entry in the .got: set it, once */
-      if (! asym->gotent.reloc_done)
-	{
-	  asym->gotent.reloc_done = 1;
-	  *(Elf32_Addr *)(afile->got->contents + asym->gotent.offset) = v;
-	}
-      /* make the reloc with_respect_to_.got */
-      *loc += asym->gotent.offset;
-      break;
-
-      /* relative reloc, always to _GLOBAL_OFFSET_TABLE_ (which is .got)
-	 similar to branch, but is full 32 bits relative */
-    case R_ARM_GOTPC:
-      assert(got);
-      *loc += got - dot;
-      break;
-
-    case R_ARM_PC24:
-    case R_ARM_PLT32:
-      /* find the plt entry and initialize it if necessary */
-      assert(asym != NULL);
-      pe = (struct arm_plt_entry*) &asym->pltent;
-      if (! pe->inited)
-	{
-	  ip = (unsigned long *) (afile->plt->contents + pe->offset);
-	  ip[0] = 0xe51ff004;			/* ldr pc,[pc,#-4] */
-	  ip[1] = v;				/* sym@ */
-	  pe->inited = 1;
-	}
-
-      /* relative distance to target */
-      v -= dot;
-      /* if the target is too far away.... */
-      if ((int)v < -0x02000000 || (int)v >= 0x02000000)
-	{
-	  /* go via the plt */
-	  v = plt + pe->offset - dot;
-	}
-      if (v & 3)
-	ret = obj_reloc_dangerous;
-
-      /* Convert to words. */
-      v >>= 2;
-
-      /* merge the offset into the instruction. */
-      *loc = (*loc & ~0x00ffffff) | ((v + *loc) & 0x00ffffff);
-      break;
-
-      /* address relative to the got */
-    case R_ARM_GOTOFF:
-      assert(got);
-      *loc += v - got;
-      break;
-
-    default:
-      printf("Warning: unhandled reloc %d\n",ELF32_R_TYPE(rel->r_info));
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct arm_file *afile = (struct arm_file *) f;
-  int i;
-  struct obj_section *sec, *syms, *strs;
-  ElfW(Rel) *rel, *relend;
-  ElfW(Sym) *symtab, *extsym;
-  const char *strtab;
-  struct arm_symbol *intsym;
-  struct arm_plt_entry *pe;
-  struct arm_got_entry *ge;
-  int got_offset = 0, plt_offset = 0;
-
-  for (i = 0; i < f->header.e_shnum; ++i)
-    {
-      sec = f->sections[i];
-      if (sec->header.sh_type != SHT_RELM)
-	continue;
-      syms = f->sections[sec->header.sh_link];
-      strs = f->sections[syms->header.sh_link];
-
-      rel = (ElfW(RelM) *) sec->contents;
-      relend = rel + (sec->header.sh_size / sizeof(ElfW(RelM)));
-      symtab = (ElfW(Sym) *) syms->contents;
-      strtab = (const char *) strs->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  extsym = &symtab[ELF32_R_SYM(rel->r_info)];
-
-	  switch(ELF32_R_TYPE(rel->r_info)) {
-	  case R_ARM_PC24:
-	  case R_ARM_PLT32:
-	    obj_find_relsym(intsym, f, f, rel, symtab, strtab);
-
-	    pe = &intsym->pltent;
-
-	    if (! pe->allocated)
-	      {
-		pe->allocated = 1;
-		pe->offset = plt_offset;
-		plt_offset += 8;
-		pe->inited = 0;
-	      }
-	    break;
-
-	    /* these two don_t need got entries, but they need
-	       the .got to exist */
-	  case R_ARM_GOTOFF:
-	  case R_ARM_GOTPC:
-	    if (got_offset==0) got_offset = 4;
-	    break;
-
-	  case R_ARM_GOT32:
-	    obj_find_relsym(intsym, f, f, rel, symtab, strtab);
-
-	    ge = (struct arm_got_entry *) &intsym->gotent;
-	    if (! ge->allocated)
-	      {
-		ge->allocated = 1;
-		ge->offset = got_offset;
-		got_offset += sizeof(void*);
-	      }
-	    break;
-
-	  default:
-	    continue;
-	  }
-	}
-    }
-
-  /* if there was a _GLOBAL_OFFSET_TABLE_, then the .got section
-   exists already; find it and use it */
-  if (got_offset)
-  {
-      struct obj_section* sec = obj_find_section(f, ".got");
-      if (sec)
-	obj_extend_section(sec, got_offset);
-      else
-	{
-	  sec = obj_create_alloced_section(f, ".got", 8, got_offset,
-					   SHF_WRITE);
-	  assert(sec);
-	}
-      afile->got = sec;
-  }
-
-  if (plt_offset)
-    afile->plt = obj_create_alloced_section(f, ".plt", 8, plt_offset,
-					    SHF_WRITE);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_common.c b/mdk-stage1/insmod-modutils/obj/obj_common.c
deleted file mode 100644
index a957ff1be..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_common.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/* Elf file, section, and symbol manipulation routines.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-#include <alloca.h>
-
-#include <obj.h>
-#include <util.h>
-#include <module.h>
-
-/*======================================================================*/
-
-/* Standard ELF hash function.  */
-inline unsigned long
-obj_elf_hash_n(const char *name, unsigned long n)
-{
-  unsigned long h = 0;
-  unsigned long g;
-  unsigned char ch;
-
-  while (n > 0)
-    {
-      ch = *name++;
-      h = (h << 4) + ch;
-      if ((g = (h & 0xf0000000)) != 0)
-	{
-	  h ^= g >> 24;
-	  h &= ~g;
-	}
-      n--;
-    }
-  return h;
-}
-
-unsigned long
-obj_elf_hash (const char *name)
-{
-  return obj_elf_hash_n(name, strlen(name));
-}
-
-void
-obj_set_symbol_compare (struct obj_file *f,
-			int (*cmp)(const char *, const char *),
-			unsigned long (*hash)(const char *))
-{
-  if (cmp)
-    f->symbol_cmp = cmp;
-  if (hash)
-    {
-      struct obj_symbol *tmptab[HASH_BUCKETS], *sym, *next;
-      int i;
-
-      f->symbol_hash = hash;
-
-      memcpy(tmptab, f->symtab, sizeof(tmptab));
-      memset(f->symtab, 0, sizeof(f->symtab));
-
-      for (i = 0; i < HASH_BUCKETS; ++i)
-	for (sym = tmptab[i]; sym ; sym = next)
-	  {
-	    unsigned long h = hash(sym->name) % HASH_BUCKETS;
-	    next = sym->next;
-	    sym->next = f->symtab[h];
-	    f->symtab[h] = sym;
-	  }
-    }
-}
-
-struct obj_symbol *
-obj_add_symbol (struct obj_file *f, const char *name, unsigned long symidx,
-		int info, int secidx, ElfW(Addr) value, unsigned long size)
-{
-  struct obj_symbol *sym;
-  unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-  int n_type = ELFW(ST_TYPE)(info);
-  int n_binding = ELFW(ST_BIND)(info);
-
-  for (sym = f->symtab[hash]; sym; sym = sym->next)
-    if (f->symbol_cmp(sym->name, name) == 0)
-      {
-	int o_secidx = sym->secidx;
-	int o_info = sym->info;
-	int o_type = ELFW(ST_TYPE)(o_info);
-	int o_binding = ELFW(ST_BIND)(o_info);
-
-	/* A redefinition!  Is it legal?  */
-
-	if (secidx == SHN_UNDEF)
-	  return sym;
-	else if (o_secidx == SHN_UNDEF)
-	  goto found;
-	else if (n_binding == STB_GLOBAL && o_binding == STB_LOCAL)
-	  {
-	    /* Cope with local and global symbols of the same name
-	       in the same object file, as might have been created
-	       by ld -r.  The only reason locals are now seen at this
-	       level at all is so that we can do semi-sensible things
-	       with parameters.  */
-
-	    struct obj_symbol *nsym, **p;
-
-	    nsym = arch_new_symbol();
-	    nsym->next = sym->next;
-	    nsym->ksymidx = -1;
-
-	    /* Excise the old (local) symbol from the hash chain.  */
-	    for (p = &f->symtab[hash]; *p != sym; p = &(*p)->next)
-	      continue;
-	    *p = sym = nsym;
-	    goto found;
-	  }
-	else if (n_binding == STB_LOCAL)
-	  {
-	    /* Another symbol of the same name has already been defined.
-	       Just add this to the local table.  */
-	    sym = arch_new_symbol();
-	    sym->next = NULL;
-	    sym->ksymidx = -1;
-	    f->local_symtab[symidx] = sym;
-	    goto found;
-	  }
-	else if (n_binding == STB_WEAK)
-	  return sym;
-	else if (o_binding == STB_WEAK)
-	  goto found;
-	/* Don't unify COMMON symbols with object types the programmer
-	   doesn't expect.  */
-	else if (secidx == SHN_COMMON
-		 && (o_type == STT_NOTYPE || o_type == STT_OBJECT))
-	  return sym;
-	else if (o_secidx == SHN_COMMON
-		 && (n_type == STT_NOTYPE || n_type == STT_OBJECT))
-	  goto found;
-	else
-	  {
-	    /* Don't report an error if the symbol is coming from
-	       the kernel or some external module.  */
-	    if (secidx <= SHN_HIRESERVE)
-	      error("%s multiply defined", name);
-	    return sym;
-	  }
-      }
-
-  /* Completely new symbol.  */
-  sym = arch_new_symbol();
-  sym->next = f->symtab[hash];
-  f->symtab[hash] = sym;
-  sym->ksymidx = -1;
-
-  if (ELFW(ST_BIND)(info) == STB_LOCAL && symidx != -1) {
-    if (symidx >= f->local_symtab_size)
-      error("local symbol %s with index %ld exceeds local_symtab_size %ld",
-        name, (long) symidx, (long) f->local_symtab_size);
-    else
-      f->local_symtab[symidx] = sym;
-  }
-
-found:
-  sym->name = name;
-  sym->value = value;
-  sym->size = size;
-  sym->secidx = secidx;
-  sym->info = info;
-  sym->r_type = 0;	/* should be R_arch_NONE for all arch */
-
-  return sym;
-}
-
-struct obj_symbol *
-obj_find_symbol (struct obj_file *f, const char *name)
-{
-  struct obj_symbol *sym;
-  unsigned long hash = f->symbol_hash(name) % HASH_BUCKETS;
-
-  for (sym = f->symtab[hash]; sym; sym = sym->next)
-    if (f->symbol_cmp(sym->name, name) == 0)
-      return sym;
-
-  return NULL;
-}
-
-ElfW(Addr)
-obj_symbol_final_value (struct obj_file *f, struct obj_symbol *sym)
-{
-  if (sym)
-    {
-      if (sym->secidx >= SHN_LORESERVE)
-	return sym->value;
-
-      return sym->value + f->sections[sym->secidx]->header.sh_addr;
-    }
-  else
-    {
-      /* As a special case, a NULL sym has value zero.  */
-      return 0;
-    }
-}
-
-struct obj_section *
-obj_find_section (struct obj_file *f, const char *name)
-{
-  int i, n = f->header.e_shnum;
-
-  for (i = 0; i < n; ++i)
-    if (strcmp(f->sections[i]->name, name) == 0)
-      return f->sections[i];
-
-  return NULL;
-}
-
-#if defined (ARCH_alpha)
-#define ARCH_SHF_SHORT	SHF_ALPHA_GPREL
-#elif defined (ARCH_ia64)
-#define ARCH_SHF_SHORT	SHF_IA_64_SHORT
-#else
-#define ARCH_SHF_SHORT	0
-#endif
-
-static int
-obj_load_order_prio(struct obj_section *a)
-{
-  unsigned long af, ac;
-
-  af = a->header.sh_flags;
-
-  ac = 0;
-  if (a->name[0] != '.'
-      || strlen(a->name) != 10
-      || strcmp(a->name + 5, ".init"))
-    ac |= 64;
-  if (af & SHF_ALLOC) ac |= 32;
-  if (af & SHF_EXECINSTR) ac |= 16;
-  if (!(af & SHF_WRITE)) ac |= 8;
-  if (a->header.sh_type != SHT_NOBITS) ac |= 4;
-  /* Desired order is
-		P S  AC & 7
-	.data	1 0  4
-	.got	1 1  3
-	.sdata  1 1  1
-	.sbss   0 1  1
-	.bss    0 0  0  */
-  if (strcmp (a->name, ".got") == 0) ac |= 2;
-  if (af & ARCH_SHF_SHORT)
-    ac = (ac & ~4) | 1;
-
-  return ac;
-}
-
-void
-obj_insert_section_load_order (struct obj_file *f, struct obj_section *sec)
-{
-  struct obj_section **p;
-  int prio = obj_load_order_prio(sec);
-  for (p = f->load_order_search_start; *p ; p = &(*p)->load_next)
-    if (obj_load_order_prio(*p) < prio)
-      break;
-  sec->load_next = *p;
-  *p = sec;
-}
-
-struct obj_section *
-obj_create_alloced_section (struct obj_file *f, const char *name,
-			    unsigned long align, unsigned long size,
-			    unsigned long flags)
-{
-  int newidx = f->header.e_shnum++;
-  struct obj_section *sec;
-
-  f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
-  f->sections[newidx] = sec = arch_new_section();
-
-  memset(sec, 0, sizeof(*sec));
-  sec->header.sh_type = SHT_PROGBITS;
-  sec->header.sh_flags = flags | SHF_ALLOC;
-  sec->header.sh_size = size;
-  sec->header.sh_addralign = align;
-  sec->name = name;
-  sec->idx = newidx;
-  if (size)
-    sec->contents = xmalloc(size);
-
-  obj_insert_section_load_order(f, sec);
-
-  return sec;
-}
-
-struct obj_section *
-obj_create_alloced_section_first (struct obj_file *f, const char *name,
-				  unsigned long align, unsigned long size)
-{
-  int newidx = f->header.e_shnum++;
-  struct obj_section *sec;
-
-  f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
-  f->sections[newidx] = sec = arch_new_section();
-
-  memset(sec, 0, sizeof(*sec));
-  sec->header.sh_type = SHT_PROGBITS;
-  sec->header.sh_flags = SHF_WRITE|SHF_ALLOC;
-  sec->header.sh_size = size;
-  sec->header.sh_addralign = align;
-  sec->name = name;
-  sec->idx = newidx;
-  if (size)
-    sec->contents = xmalloc(size);
-
-  sec->load_next = f->load_order;
-  f->load_order = sec;
-  if (f->load_order_search_start == &f->load_order)
-    f->load_order_search_start = &sec->load_next;
-
-  return sec;
-}
-
-void *
-obj_extend_section (struct obj_section *sec, unsigned long more)
-{
-  unsigned long oldsize = sec->header.sh_size;
-  sec->contents = xrealloc(sec->contents, sec->header.sh_size += more);
-  return sec->contents + oldsize;
-}
-
-/* Convert an object pointer (address) to a native pointer and vice versa.
- * It gets interesting when the object has 64 bit pointers but modutils
- * is running 32 bit.  This is nasty code but it stops the compiler giving
- * spurious warning messages.  "I know what I am doing" ...
- */
-
-void *
-obj_addr_to_native_ptr (ElfW(Addr) addr)
-{
-	unsigned int convert = (sizeof(void *) << 8) + sizeof(addr);	/* to, from */
-	union obj_ptr_4 p4;
-	union obj_ptr_8 p8;
-	switch (convert) {
-	case 0x0404:
-		p4.addr = addr;
-		return(p4.ptr);
-		break;
-	case 0x0408:
-		p4.addr = addr;
-		if (p4.addr != addr) {
-			error("obj_addr_to_native_ptr truncation %" tgt_long_fmt "x",
-				(tgt_long) addr);
-			exit(1);
-		}
-		return(p4.ptr);
-		break;
-	case 0x0804:
-		p8.addr = addr;
-		return(p8.ptr);
-		break;
-	case 0x0808:
-		p8.addr = addr;
-		return(p8.ptr);
-		break;
-	default:
-		error("obj_addr_to_native_ptr unknown conversion 0x%04x", convert);
-		exit(1);
-	}
-}
-
-ElfW(Addr)
-obj_native_ptr_to_addr (void *ptr)
-{
-	unsigned int convert = (sizeof(ElfW(Addr)) << 8) + sizeof(ptr);	/* to, from */
-	union obj_ptr_4 p4;
-	union obj_ptr_8 p8;
-	switch (convert) {
-	case 0x0404:
-		p4.ptr = ptr;
-		return(p4.addr);
-		break;
-	case 0x0408:
-		p8.ptr = ptr;
-		p4.addr = p8.addr;
-		if (p4.addr != p8.addr) {
-			error("obj_native_ptr_to_addr truncation %" tgt_long_fmt "x",
-				(tgt_long) p8.addr);
-			exit(1);
-		}
-		return(p4.addr);
-		break;
-	case 0x0804:
-		p4.ptr = ptr;
-		return(p4.addr);	/* compiler expands to 8 */
-		break;
-	case 0x0808:
-		p8.ptr = ptr;
-		return(p8.addr);
-		break;
-	default:
-		error("obj_native_ptr_to_addr unknown conversion 0x%04x", convert);
-		exit(1);
-	}
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_hppa.c b/mdk-stage1/insmod-modutils/obj/obj_hppa.c
deleted file mode 100644
index a6f703c5d..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_hppa.c
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * PA-RISC specific support for Elf loading and relocation.
- * Copyright 2000 David Huggins-Daines <dhd@linuxcare.com>, Linuxcare Inc.
- * Copyright 2000 Richard Hirst <rhirst@linuxcare.com>, Linuxcare Inc.
- *
- * Based on the IA-64 support, which is:
- * Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-#include <modstat.h>	/* For ksyms */
-
-
-typedef struct _hppa_stub_t
-{
-  struct _hppa_stub_t *next;
-  int offset;
-  int reloc_done;
-} hppa_stub_t;
-
-typedef struct _hppa_symbol_t
-{
-  struct obj_symbol root;
-  hppa_stub_t *stub;
-} hppa_symbol_t;
-
-typedef struct _hppa_file_t
-{
-  struct obj_file root;
-  struct obj_section *stub;
-  Elf32_Addr dp;
-} hppa_file_t;
-
-/* The ABI defines various more esoteric types, but these are the only
-   ones we actually need. */
-enum hppa_fsel
-{
-  e_fsel,
-  e_lsel,
-  e_rsel,
-  e_lrsel,
-  e_rrsel
-};
-
-struct obj_file *
-arch_new_file (void)
-{
-  hppa_file_t *f;
-  f = xmalloc(sizeof(*f));
-  f->stub = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  hppa_symbol_t *sym;
-  sym = xmalloc(sizeof(*sym));
-  sym->stub = NULL;
-  return &sym->root;
-}
-
-/* This is called for architecture specific sections we might need to
-   do special things to. */
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-  /* Assume it's just a debugging section that we can safely
-     ignore ...  */
-  sec->contents = NULL;
-
-  return 0;
-}
-
-/* =================================================================
-
-   These functions are from libhppa.h in the GNU BFD library.
-   (c) 1990, 91, 92, 93, 94, 95, 96, 98, 99, 2000
-   Free Software Foundation, Inc.
-
-   ================================================================= */
-
-/* The *sign_extend functions are used to assemble various bitfields
-   taken from an instruction and return the resulting immediate
-   value.  */
-
-static inline int
-sign_extend (x, len)
-     int x, len;
-{
-  int signbit = (1 << (len - 1));
-  int mask = (signbit << 1) - 1;
-  return ((x & mask) ^ signbit) - signbit;
-}
-
-static inline int
-low_sign_extend (x, len)
-     int x, len;
-{
-  return (x >> 1) - ((x & 1) << (len - 1));
-}
-
-
-/* The re_assemble_* functions prepare an immediate value for
-   insertion into an opcode. pa-risc uses all sorts of weird bitfields
-   in the instruction to hold the value.  */
-
-static inline int
-sign_unext (x, len)
-     int x, len;
-{
-  int len_ones;
-
-  len_ones = (1 << len) - 1;
-
-  return x & len_ones;
-}
-
-static inline int
-low_sign_unext (x, len)
-     int x, len;
-{
-  int temp;
-  int sign;
-
-  sign = (x >> (len-1)) & 1;
-
-  temp = sign_unext (x, len-1);
-
-  return (temp << 1) | sign;
-}
-
-static inline int
-re_assemble_3 (as3)
-     int as3;
-{
-  return ((  (as3 & 4) << (13-2))
-	  | ((as3 & 3) << (13+1)));
-}
-
-static inline int
-re_assemble_12 (as12)
-     int as12;
-{
-  return ((  (as12 & 0x800) >> 11)
-	  | ((as12 & 0x400) >> (10 - 2))
-	  | ((as12 & 0x3ff) << (1 + 2)));
-}
-
-static inline int
-re_assemble_14 (as14)
-     int as14;
-{
-  return ((  (as14 & 0x1fff) << 1)
-	  | ((as14 & 0x2000) >> 13));
-}
-
-static inline int
-re_assemble_16 (as16)
-     int as16;
-{
-  int s, t;
-
-  /* Unusual 16-bit encoding, for wide mode only.  */
-  t = (as16 << 1) & 0xffff;
-  s = (as16 & 0x8000);
-  return (t ^ s ^ (s >> 1)) | (s >> 15);
-}
-
-static inline int
-re_assemble_17 (as17)
-     int as17;
-{
-  return ((  (as17 & 0x10000) >> 16)
-	  | ((as17 & 0x0f800) << (16 - 11))
-	  | ((as17 & 0x00400) >> (10 - 2))
-	  | ((as17 & 0x003ff) << (1 + 2)));
-}
-
-static inline int
-re_assemble_21 (as21)
-     int as21;
-{
-  return ((  (as21 & 0x100000) >> 20)
-	  | ((as21 & 0x0ffe00) >> 8)
-	  | ((as21 & 0x000180) << 7)
-	  | ((as21 & 0x00007c) << 14)
-	  | ((as21 & 0x000003) << 12));
-}
-
-static inline int
-re_assemble_22 (as22)
-     int as22;
-{
-  return ((  (as22 & 0x200000) >> 21)
-	  | ((as22 & 0x1f0000) << (21 - 16))
-	  | ((as22 & 0x00f800) << (16 - 11))
-	  | ((as22 & 0x000400) >> (10 - 2))
-	  | ((as22 & 0x0003ff) << (1 + 2)));
-}
-
-
-/* Handle field selectors for PA instructions.
-   The L and R (and LS, RS etc.) selectors are used in pairs to form a
-   full 32 bit address.  eg.
-
-   LDIL	L'start,%r1		; put left part into r1
-   LDW	R'start(%r1),%r2	; add r1 and right part to form address
-
-   This function returns sign extended values in all cases.
-*/
-
-static inline unsigned int
-hppa_field_adjust (value, addend, r_field)
-     unsigned int value;
-     int addend;
-     enum hppa_fsel r_field;
-{
-  unsigned int sym_val;
-
-  sym_val = value - addend;
-  switch (r_field)
-    {
-    case e_fsel:
-      /* F: No change.  */
-      break;
-
-    case e_lsel:
-      /* L:  Select top 21 bits.  */
-      value = value >> 11;
-      break;
-
-    case e_rsel:
-      /* R:  Select bottom 11 bits.  */
-      value = value & 0x7ff;
-      break;
-
-    case e_lrsel:
-      /* LR:  L with rounding of the addend to nearest 8k.  */
-      value = sym_val + ((addend + 0x1000) & -0x2000);
-      value = value >> 11;
-      break;
-
-    case e_rrsel:
-      /* RR:  R with rounding of the addend to nearest 8k.
-	 We need to return a value such that 2048 * LR'x + RR'x == x
-	 ie. RR'x = s+a - (s + (((a + 0x1000) & -0x2000) & -0x800))
-	 .	  = s+a - ((s & -0x800) + ((a + 0x1000) & -0x2000))
-	 .	  = (s & 0x7ff) + a - ((a + 0x1000) & -0x2000)  */
-      value = (sym_val & 0x7ff) + (((addend & 0x1fff) ^ 0x1000) - 0x1000);
-      break;
-
-    default:
-      abort();
-    }
-  return value;
-}
-
-/* Insert VALUE into INSN using R_FORMAT to determine exactly what
-   bits to change.  */
-
-static inline int
-hppa_rebuild_insn (insn, value, r_format)
-     int insn;
-     int value;
-     int r_format;
-{
-  switch (r_format)
-    {
-    case 11:
-      return (insn & ~ 0x7ff) | low_sign_unext (value, 11);
-
-    case 12:
-      return (insn & ~ 0x1ffd) | re_assemble_12 (value);
-
-
-    case 10:
-      return (insn & ~ 0x3ff1) | re_assemble_14 (value & -8);
-
-    case -11:
-      return (insn & ~ 0x3ff9) | re_assemble_14 (value & -4);
-
-    case 14:
-      return (insn & ~ 0x3fff) | re_assemble_14 (value);
-
-
-    case -10:
-      return (insn & ~ 0xfff1) | re_assemble_16 (value & -8);
-
-    case -16:
-      return (insn & ~ 0xfff9) | re_assemble_16 (value & -4);
-
-    case 16:
-      return (insn & ~ 0xffff) | re_assemble_16 (value);
-
-
-    case 17:
-      return (insn & ~ 0x1f1ffd) | re_assemble_17 (value);
-
-    case 21:
-      return (insn & ~ 0x1fffff) | re_assemble_21 (value);
-
-    case 22:
-      return (insn & ~ 0x3ff1ffd) | re_assemble_22 (value);
-
-    case 32:
-      return value;
-
-    default:
-      abort ();
-    }
-  return insn;
-}
-
-/* ====================================================================
-
-   End of functions from GNU BFD. 
-
-   ==================================================================== */
-
-/* This is where we get the opportunity to create any extra dynamic
-   sections we might need.  In our case we do not need a GOT because
-   our code is not PIC, but we do need to create a stub section.
-
-   This is significantly less complex than what we do for shared
-   libraries because, obviously, modules are not shared.  Also we have
-   no issues related to symbol visibility, lazy linking, etc.
-   The kernels dp is fixed (at symbol $global$), and we can fix up any
-   DPREL refs in the module to use that same dp value.
-   All PCREL* refs result in a stub with the following format:
-
-  	ldil L'func_addr,%r1
-        be,n R'func_addr(%sr4,%r1)
-
-  Note, all PCREL* get a stub, regardless of whether they are
-  local or external.  With local ones, and external ones to other
-  modules, there is a good chance we could manage without the stub.
-  I'll leave that for a future optimisation.
- */
-
-#define LDIL_R1		0x20200000	/* ldil  L'XXX,%r1		*/
-#define BE_N_SR4_R1	0xe0202002	/* be,n  R'XXX(%sr4,%r1)	*/
-
-#define STUB_SIZE 8
-
-int
-arch_create_got(struct obj_file *f)
-{
-  hppa_file_t *hfile = (hppa_file_t *)f;
-  int i, n;
-  int stub_offset = 0;
-
-  /* Create stub section.
-   * XXX set flags, see obj_ia64.c
-   */
-  hfile->stub = obj_create_alloced_section(f, ".stub", STUB_SIZE,
-					   0, SHF_WRITE);
-
-  /* Actually this is a lot like check_relocs() in a BFD backend.  We
-     walk all sections and all their relocations and look for ones
-     that need special treatment. */
-  n = hfile->root.header.e_shnum;
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *strsec;
-      Elf32_Rela *rel, *relend;
-      Elf32_Sym *symtab;
-      char const *strtab;
-
-      relsec = hfile->root.sections[i];
-      if (relsec->header.sh_type != SHT_RELA)
-	continue;
-
-      symsec = hfile->root.sections[relsec->header.sh_link];
-      strsec = hfile->root.sections[symsec->header.sh_link];
-
-      rel = (Elf32_Rela *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rela));
-      symtab = (Elf32_Sym *)symsec->contents;
-      strtab = (char const *)strsec->contents;
-
-      for (; rel < relend; rel++)
-	{
-	  int need_stub = 0;
-
-	  switch (ELF32_R_TYPE(rel->r_info))
-	    {
-	    default:
-	      continue;
-
-	    case R_PARISC_PCREL17F:
-	    case R_PARISC_PCREL22F:
-	      need_stub = 1;
-	      break;
-	    }
-
-	  if (need_stub)
-	    {
-	      hppa_symbol_t *hsym;
-	      int local;
-
-	      obj_find_relsym(hsym, f, f, rel, symtab, strtab);
-	      local = hsym->root.secidx <= SHN_HIRESERVE;
-
-	      if (need_stub)
-		{
-		  hppa_stub_t *stub;
-
-		  if (hsym->stub == NULL)
-		    {
-		      stub = (hppa_stub_t *) xmalloc(sizeof(hppa_stub_t));
-		      stub->offset = stub_offset;
-		      stub->reloc_done = 0;
-		      hsym->stub = stub;
-		      stub_offset += STUB_SIZE;
-		      need_stub = 0;
-		    }
-		}
-	    }
-        }
-    }
-  if (stub_offset)
-    {
-      hfile->stub->contents = xmalloc(stub_offset);
-      hfile->stub->header.sh_size = stub_offset;
-    }
-  return 1;
-}
-
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
-		      struct obj_section *targsec,
-		      struct obj_section *symsec,
-		      struct obj_symbol *sym,
-		      Elf32_Rela *rel,
-		      Elf32_Addr v)
-{
-  hppa_file_t *hfile = (hppa_file_t *) f;
-  hppa_symbol_t *hsym  = (hppa_symbol_t *) sym;
-
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
-  Elf32_Addr dp = hfile->dp;
-  Elf32_Word r_info = ELF32_R_TYPE(rel->r_info);
-
-  enum obj_reloc ret = obj_reloc_ok;
-  enum hppa_fsel fsel = e_fsel;	/* Avoid compiler warning */
-  unsigned int r_format;
-
-  /* Fix up the value, and determine whether we can handle this
-     relocation. */
-  switch (r_info)
-  {
-  case R_PARISC_PLABEL32:
-  case R_PARISC_DIR32:
-  case R_PARISC_DIR21L:
-  case R_PARISC_DIR14R:
-    /* Easy. */
-    break;
-
-  case R_PARISC_SEGREL32:
-    v -= f->baseaddr;
-    break;
-
-  case R_PARISC_DPREL21L:
-  case R_PARISC_DPREL14R:
-    v -= dp;
-    break;
-
-  case R_PARISC_PCREL17F:
-  case R_PARISC_PCREL22F:
-    /* Find an import stub. */
-    assert(hsym->stub != NULL);
-    assert(hfile->stub != NULL);
-    /* XXX Optimise.  We may not need a stub for short branches */
-    if (!hsym->stub->reloc_done) {
-      /* Need to create the .stub entry */
-      Elf32_Addr *pstub, stubv;
-
-      pstub = (Elf32_Addr *)(hfile->stub->contents + hsym->stub->offset);
-      pstub[0] = LDIL_R1;
-      pstub[1] = BE_N_SR4_R1;
-      stubv = hppa_field_adjust(v, rel->r_addend, e_lrsel);
-      pstub[0] = hppa_rebuild_insn(pstub[0], stubv, 21);
-      stubv = hppa_field_adjust(v, rel->r_addend, e_rrsel);
-      stubv >>= 2;	/* Branch; divide by 4 */
-      pstub[1] = hppa_rebuild_insn(pstub[1], stubv, 17);
-      hsym->stub->reloc_done = 1;
-    }
-    v = hsym->stub->offset + hfile->stub->header.sh_addr;
-    break;
-
-  default:
-    return obj_reloc_unhandled;
-  }
-
-  /* Find the field selector. */
-  switch (r_info)
-    {
-    case R_PARISC_DIR32:
-    case R_PARISC_PLABEL32:
-    case R_PARISC_PCREL17F:
-    case R_PARISC_SEGREL32:
-    case R_PARISC_PCREL22F:
-      fsel = e_fsel;
-      break;
-	
-    case R_PARISC_DPREL21L:
-    case R_PARISC_DIR21L:
-      fsel = e_lrsel;
-      break;
-
-    case R_PARISC_DPREL14R:
-    case R_PARISC_DIR14R:
-      fsel = e_rrsel;
-      break;
-    }
-
-  v = hppa_field_adjust(v, rel->r_addend, fsel);
-
-  switch (r_info)
-    {
-    case R_PARISC_PCREL17F:
-    case R_PARISC_PCREL17R:
-    case R_PARISC_PCREL22F:
-      v = v - dot - 8;
-    case R_PARISC_DIR17F:
-    case R_PARISC_DIR17R:
-      /* This is a branch.  Divide the offset by four. */
-      v >>= 2;
-      break;
-    default:
-      break;
-    }
-
-  /* Find the format. */
-  switch (r_info)
-    {
-    case R_PARISC_DIR32:
-    case R_PARISC_PLABEL32:
-    case R_PARISC_SEGREL32:
-      r_format = 32;
-      break;
-
-    case R_PARISC_DPREL21L:
-    case R_PARISC_DIR21L:
-      r_format = 21;
-      break;
-
-    case R_PARISC_PCREL17F:
-      r_format = 17;
-      break;
-	
-    case R_PARISC_DPREL14R:
-    case R_PARISC_DIR14R:
-      r_format = 14;
-      break;
-
-    case R_PARISC_PCREL22F:
-      r_format = 22;
-      break;
-
-    default:
-      abort();
-    }
-
-  *loc = hppa_rebuild_insn(*loc, v, r_format);
-
-  return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *sec)
-{
-  struct module_symbol *s;
-  int i;
-  hppa_file_t *hfile = (hppa_file_t *)f;
-
-  /* Initialise dp to the kernels dp (symbol $global$)
-   */
-  for (i = 0, s = ksyms; i < nksyms; i++, s++)
-    if (!strcmp((char *)s->name, "$global$"))
-      break;
-  if (i >= nksyms) {
-    error("Cannot initialise dp, '$global$' not found\n");
-    return 1;
-  }
-  hfile->dp = s->value;
-  
-  return 0;
-}
-
diff --git a/mdk-stage1/insmod-modutils/obj/obj_hppa64.c b/mdk-stage1/insmod-modutils/obj/obj_hppa64.c
deleted file mode 100644
index d9f1ada9d..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_hppa64.c
+++ /dev/null
@@ -1,682 +0,0 @@
-/*
- * hppa parisc64 specific support for Elf loading and relocation.
- * Copyright 2000 Richard Hirst <rhirst@linuxcare.com>, Linuxcare Inc.
- *
- * Based on ia64 specific support which was
- *   Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <string.h>
-#include <assert.h>
-#include <stdlib.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-#ifndef TRUE
-#define TRUE  ~FALSE
-#endif
-
-/*======================================================================*/
-
-typedef struct _hppa64_opd_t
-{
-    int offset;
-    int reloc_done;
-} hppa64_opd_t;
-
-typedef struct _hppa64_stub_t
-{
-    struct _hppa64_stub_t *next;
-    Elf64_Addr addend;
-    int offset;
-    int reloc_done;
-} hppa64_stub_t;
-
-typedef struct _hppa64_got_t
-{
-    struct _hppa64_got_t *next;
-    Elf64_Addr addend;
-    int offset;
-    int reloc_done;
-} hppa64_got_t;
-
-typedef struct _hppa64_symbol_t
-{
-    struct obj_symbol root;
-    hppa64_got_t *gotent;
-    hppa64_opd_t *opdent;
-    hppa64_stub_t *stubent;
-} hppa64_symbol_t;
-
-typedef struct _hppa64_file_t
-{
-    struct obj_file root;
-    struct obj_section *got;
-    struct obj_section *opd;
-    struct obj_section *stub;
-    Elf64_Addr gp;
-    Elf64_Addr text;
-    Elf64_Addr data;
-    Elf64_Addr bss;
-} hppa64_file_t;
-
-/*
- * XXX This stub assumes it can reach the .got entry with a +/- 8K offset
- * from dp.  Perhaps we should use a .plt for these entries to give a
- * greater chance of that being true.
- *
- *     53 7b 00 00     ldd 0(dp),dp
- *     			R_PARISC_LTOFF14R <.got entry offset from dp>
- *     53 61 00 20     ldd 10(dp),r1
- *     e8 20 d0 00     bve (r1)
- *     53 7b 00 30     ldd 18(dp),dp
- *
- * We need a different stub for millicode calls, which doesn't depend on
- * or modify dp:
- *
- *     20 20 00 00     ldil 0,r1
- *			R_PARISC_DIR21L <addr of kernels opd entry>
- *     34 21 00 00     ldo 0(r1),r1
- *			R_PARISC_DIR14R <addr of kernels opd entry>
- *     50 21 00 20     ldd 10(r1),r1
- *     e8 20 d0 02     bve,n (r1)
- */
-
-/* NOTE: to keep the code cleaner we make all stubs the same size.
- */
-
-#define SIZEOF_STUB	16
-
-unsigned char hppa64_stub_extern[] =
-{
-       0x53, 0x7b, 0x00, 0x00,
-       0x53, 0x61, 0x00, 0x20,
-       0xe8, 0x20, 0xd0, 0x00,
-       0x53, 0x7b, 0x00, 0x30,
-};
-
-unsigned char hppa64_stub_millicode[] =
-{
-       0x20, 0x20, 0x00, 0x00,
-       0x34, 0x21, 0x00, 0x00,
-       0x50, 0x21, 0x00, 0x20,
-       0xe8, 0x20, 0xd0, 0x02,
-};
-
-/*======================================================================*/
-
-enum obj_reloc
-patch_14r(Elf64_Xword v64, Elf64_Word *p)
-{
-	Elf64_Word i = *p;
-	Elf64_Word v = (Elf64_Word)v64;
-
-	if (v & 0x80000000)
-		v |= ~0x7ff;
-	else
-		v &= 0x7ff;
-	i &= ~ 0x3fff;
-	i |=    (v & 0x1fff) << 1 |
-		(v & 0x2000) >> 13;
-	*p = i;
-
-    return obj_reloc_ok;
-}
-
-enum obj_reloc
-patch_21l(Elf64_Xword v64, Elf64_Word *p)
-{
-	Elf64_Word i = *p;
-	Elf64_Word v = (Elf64_Word)v64;
-
-	v &= 0xfffff800;
-	if (v & 0x80000000)
-		v += 0x800;
-	i &= ~ 0x1fffff;
-	i |=    (v & 0x80000000) >> 31 |
-		(v & 0x7ff00000) >> 19 |
-		(v & 0x000c0000) >> 4 |
-		(v & 0x0003e000) << 3 |
-		(v & 0x00001800) << 1;
-	*p = i;
-
-    return obj_reloc_ok;
-}
-
-
-/* All 14 bits this time...  This is used to patch the .got offset in
- * a stub for PCREL22F.
- */
-
-enum obj_reloc
-patch_14r2(Elf64_Xword v64, Elf64_Word *p)
-{
-	Elf64_Word i = *p;
-	Elf64_Word v = (Elf64_Word)v64;
-
-	if ((Elf64_Sxword)v64 > 0x1fffL ||
-			(Elf64_Sxword)v64 < -0x2000L)
-		return obj_reloc_overflow;
-	i &= ~ 0x3fff;
-	i |=    (v & 0x2000) >> 13 |
-		(v & 0x1fff) << 1;
-	*p = i;
-
-    return obj_reloc_ok;
-}
-
-
-enum obj_reloc
-patch_22f(Elf64_Xword v64, Elf64_Word *p)
-{
-	Elf64_Word i = *p;
-	Elf64_Word v = (Elf64_Word)v64;
-
-	if ((Elf64_Sxword)v64 > 0x800000-1 ||
-	    (Elf64_Sxword)v64 < -0x800000)
-		return obj_reloc_overflow;
-
-	i &= ~ 0x03ff1ffd;
-	i |=    (v & 0x00800000) >> 23 |
-		(v & 0x007c0000) << 3 |
-		(v & 0x0003e000) << 3 |
-		(v & 0x00001000) >> 10 |
-		(v & 0x00000ffc) << 1;
-	*p = i;
-
-    return obj_reloc_ok;
-}
-
-
-struct obj_section *
-obj_hppa64_create_alloced_section (struct obj_file *f, const char *name,
-    unsigned long align, unsigned long size, unsigned long sh_flags)
-{
-    int newidx = f->header.e_shnum++;
-    struct obj_section *sec;
-
-    f->sections = xrealloc(f->sections, (newidx+1) * sizeof(sec));
-    f->sections[newidx] = sec = arch_new_section();
-
-    memset(sec, 0, sizeof(*sec));
-    sec->header.sh_type = SHT_PROGBITS;
-    sec->header.sh_flags = sh_flags;
-    sec->header.sh_size = size;
-    sec->header.sh_addralign = align;
-    sec->name = name;
-    sec->idx = newidx;
-    if (size)
-	sec->contents = xmalloc(size);
-
-    obj_insert_section_load_order(f, sec);
-
-    return sec;
-}
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-    hppa64_file_t *f;
-    f = xmalloc(sizeof(*f));
-    f->got = NULL;
-    f->opd = NULL;
-    f->stub = NULL;
-    return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-    return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-    hppa64_symbol_t *sym;
-    sym = xmalloc(sizeof(*sym));
-    sym->gotent = NULL;
-    sym->opdent = NULL;
-    sym->stubent = NULL;
-    return &sym->root;
-}
-
-/* This may not be needed, but does no harm (copied from ia64).
- */
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    switch (sec->header.sh_type)
-    {
-    case SHT_PARISC_EXT :
-	sec->contents = NULL;
-	break;
-
-    case SHT_PARISC_UNWIND :
-	if (sec->header.sh_size > 0)
-	{
-	    sec->contents = xmalloc(sec->header.sh_size);
-	    gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
-	    if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
-	    {
-		error("error reading ELF section data: %m");
-		return -1;
-	    }
-	}
-	else
-	    sec->contents = NULL;
-	break;
-    default:
-      error("Unknown section header type: %08x", sec->header.sh_type);
-      return -1;
-    }
-    return 0;
-}
-
-int
-arch_create_got(struct obj_file *f)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *)f;
-    int i;
-    int n;
-    int got_offset = 0;
-    int opd_offset = 64;
-    int stub_offset = 0;
-
-    n = hfile->root.header.e_shnum;
-    for (i = 0; i < n; ++i)
-    {
-	struct obj_section *relsec, *symsec, *strsec;
-	Elf64_Rela *rel, *relend;
-	Elf64_Sym *symtab;
-	const char *strtab;
-
-	relsec = hfile->root.sections[i];
-	if (relsec->header.sh_type != SHT_RELA)
-	    continue;
-
-	symsec = hfile->root.sections[relsec->header.sh_link];
-	strsec = hfile->root.sections[symsec->header.sh_link];
-
-	rel = (Elf64_Rela *)relsec->contents;
-	relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
-	symtab = (Elf64_Sym *)symsec->contents;
-	strtab = (const char *)strsec->contents;
-
-	for (; rel < relend; ++rel)
-	{
-	    int need_got = FALSE;
-	    int need_opd = FALSE;
-	    int need_stub = FALSE;
-
-	    switch (ELF64_R_TYPE(rel->r_info))
-	    {
-	    default:
-		{
-		    unsigned r_info = ELF64_R_TYPE(rel->r_info);
-		    printf("r_info 0x%x not handled\n", r_info);
-		}
-		continue;
-	    case R_PARISC_LTOFF14R:
-	    case R_PARISC_LTOFF21L:
-	        /* These are simple indirect references to symbols through the
-                 * DLT.  We need to create a DLT entry for any symbols which
-                 * appears in a DLTIND relocation.
-		 */
-		need_got = TRUE;
-		break;
-	    case R_PARISC_PCREL22F:
-		/* These are function calls.  Depending on their precise
-		 * target we may need to make a stub for them.  The stub
-		 * uses the dlt, so we need to create dlt entries for
-		 * these symbols too.
-		 */
-		need_got = TRUE;
-		need_stub = TRUE;
-		break;
-	    case R_PARISC_DIR64:
-	    case R_PARISC_SEGREL32:
-		break;
-	    case R_PARISC_FPTR64:
-		/* This is a simple OPD entry (only created for local symbols,
-		 * see below).
-		 */
-		need_opd = TRUE;
-		break;
-	    }
-
-	    if (need_got || need_opd || need_stub)
-	    {
-		hppa64_symbol_t *isym;
-		int            local;
-
-		obj_find_relsym(isym, f, f, rel, symtab, strtab);
-		local = isym->root.secidx <= SHN_HIRESERVE;
-
-		if (need_stub)
-		{
-		    hppa64_stub_t *stub;
-
-		    for (stub = isym->stubent; stub != NULL; stub = stub->next)
-			if (stub->addend == rel->r_addend)
-			    break;
-		    if (stub == NULL)
-		    {
-			stub = (hppa64_stub_t *) xmalloc(sizeof(hppa64_stub_t));
-			stub->next = isym->stubent;
-			stub->addend = rel->r_addend;
-			stub->offset = stub_offset;
-			stub->reloc_done = FALSE;
-			isym->stubent = stub;
-			{
-			    stub_offset += SIZEOF_STUB;
-			}
-			need_stub = FALSE;
-		    }
-		}
-		if (need_got)
-		{
-		    hppa64_got_t *got;
-
-		    for (got = isym->gotent; got != NULL; got = got->next)
-			if (got->addend == rel->r_addend)
-			    break;
-		    if (got == NULL)
-		    {
-			got = (hppa64_got_t *) xmalloc(sizeof(hppa64_got_t));
-			got->next = isym->gotent;
-			got->addend = rel->r_addend;
-			got->offset = got_offset;
-			got->reloc_done = FALSE;
-			isym->gotent = got;
-			got_offset += 8;
-			need_got = FALSE;
-		    }
-		}
-		if (need_opd && local)
-		{
-		    hppa64_opd_t *opd;
-
-		    if (isym->opdent == NULL)
-		    {
-			opd = (hppa64_opd_t *) xmalloc(sizeof(hppa64_opd_t));
-			opd->offset = opd_offset;
-			opd->reloc_done = FALSE;
-			isym->opdent = opd;
-			opd_offset += 32;
-			need_opd = FALSE;
-		    }
-		}
-	    }
-	}
-    }
-
-    hfile->got = obj_hppa64_create_alloced_section(f, ".got", 8, got_offset,
-	(SHF_ALLOC | SHF_WRITE | SHF_PARISC_SHORT));
-    assert(hfile->got != NULL);
-
-    hfile->opd = obj_hppa64_create_alloced_section(f, ".opd", 16, opd_offset,
-	(SHF_ALLOC | SHF_WRITE | SHF_PARISC_SHORT));
-    assert(hfile->opd != NULL);
-
-    if (stub_offset > 0)
-    {
-	hfile->stub = obj_hppa64_create_alloced_section(f, ".stub", 16,
-	    stub_offset, (SHF_ALLOC | SHF_EXECINSTR | SHF_PARISC_SHORT));
-	assert(hfile->stub != NULL);
-    }
-
-    return 1;
-}
-
-
-/* This is a small simple version which seems to work fine.  ia64 has
- * a much more complex algorithm.  We point dp at the end of the .got,
- * which is the start of the .opd.
- */
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *)f;
-    int        n = f->header.e_shnum;
-    int        i;
-
-    f->baseaddr = base;
-    for (i = 0; i < n; ++i)
-	f->sections[i]->header.sh_addr += base;
-
-    /* Pick a sensible value for gp */
-    hfile->gp = hfile->got->header.sh_addr + hfile->got->header.sh_size;
-
-    return 1;
-}
-
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf64_Rela *rel,
-		       Elf64_Addr v)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *) f;
-    hppa64_symbol_t *isym  = (hppa64_symbol_t *) sym;
-
-    Elf64_Word  *loc = (Elf64_Word *)(targsec->contents + rel->r_offset);
-    Elf64_Addr  dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
-
-    Elf64_Addr  got = hfile->got->header.sh_addr;
-    Elf64_Addr  gp = hfile->gp;
-
-    Elf64_Xword r_info = ELF64_R_TYPE(rel->r_info);
-
-    enum obj_reloc ret = obj_reloc_ok;
-
-    switch (r_info)
-    {
-    default:
-	ret = obj_reloc_unhandled;
-	break;
-    case R_PARISC_LTOFF14R:
-    case R_PARISC_LTOFF21L:
-	{
-	    hppa64_got_t *ge;
-
-	    assert(isym != NULL);
-	    for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
-		ge = ge->next;
-	    assert(ge != NULL);
-	    if (!ge->reloc_done)
-	    {
-		ge->reloc_done = TRUE;
-		*(Elf64_Addr *)(hfile->got->contents + ge->offset) = v;
-	    }
-	    v = got + ge->offset - gp;
-	    if (r_info == R_PARISC_LTOFF14R)
-		ret = patch_14r(v, loc);
-	    else
-		ret = patch_21l(v, loc);
-	}
-	break;
-    case R_PARISC_PCREL22F:
-	{
-	    hppa64_got_t *ge;
-
-	    assert(isym != NULL);
-	    for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
-		ge = ge->next;
-	    assert(ge != NULL);
-	    if (!ge->reloc_done)
-	    {
-		ge->reloc_done = TRUE;
-		*(Elf64_Addr *)(hfile->got->contents + ge->offset) = v;
-	    }
-	    if ((isym->root.secidx > SHN_HIRESERVE) ||
-		((Elf64_Sxword) (v - dot - 8) > 0x800000-1) ||
-		((Elf64_Sxword) (v - dot - 8) < -0x800000))
-	    {
-		hppa64_stub_t *se;
-
-		for (se = isym->stubent; se != NULL && se->addend != rel->r_addend; )
-		    se = se->next;
-		assert(se != NULL);
-		if (!se->reloc_done)
-		{
-		    /* This requires that we can get from dp to the entry in +/- 8K,
-		     * or +/- 1000 entries.  patch_14r2() will check that.
-		     * Only need these dlt entries for calls to external/far
-		     * functions, so should probably put them in a seperate section
-		     * before dlt and point dp at the section.  Change to that
-		     * scheme if we hit problems with big modules.
-		     */
-		    unsigned char *stub;
-
-		    if (!strncmp(isym->root.name, "$$", 2)) {
-			stub = hppa64_stub_millicode;
-			memcpy((Elf64_Addr *)(hfile->stub->contents + se->offset),
-					stub, SIZEOF_STUB);
-			v = (Elf64_Addr)isym->root.value;
-			ret = patch_21l(v, (Elf64_Word *)(hfile->stub->contents + se->offset));
-			if (ret == obj_reloc_ok)
-			    ret = patch_14r(v, (Elf64_Word *)(hfile->stub->contents + se->offset + 4));
-		    }
-		    else {
-			stub = hppa64_stub_extern;
-		    memcpy((Elf64_Addr *)(hfile->stub->contents + se->offset),
-	    			stub, SIZEOF_STUB);
-		    v = (Elf64_Addr)(hfile->got->header.sh_addr + ge->offset) - gp;
-		    ret = patch_14r2(v, (Elf64_Word *)(hfile->stub->contents + se->offset));
-		}
-		    se->reloc_done = TRUE;
-		}
-		v = hfile->stub->header.sh_addr + se->offset;
-	    }
-	    v = v - dot - 8;
-	    if (ret == obj_reloc_ok)
-	        ret = patch_22f(v, loc);
-	}
-	break;
-    case R_PARISC_DIR64:
-	{
-	    loc[0] = v >> 32;
-	    loc[1] = v;
-	}
-	break;
-    case R_PARISC_SEGREL32:
-	{
-	    loc[0] = v - f->baseaddr;
-	}
-	break;
-    case R_PARISC_FPTR64:
-	{
-	    assert(isym != NULL);
-	    if (isym->root.secidx <= SHN_HIRESERVE) /* local */
-	    {
-		assert(isym->opdent != NULL);
-		if (!isym->opdent->reloc_done)
-		{
-		    isym->opdent->reloc_done = TRUE;
-		    *(Elf64_Addr *)(hfile->opd->contents + isym->opdent->offset + 16) = v;
-		    *(Elf64_Addr *)(hfile->opd->contents + isym->opdent->offset + 24) = gp;
-		}
-		v = hfile->opd->header.sh_addr + isym->opdent->offset;
-	    }
-	    loc[0] = v >> 32;
-	    loc[1] = v;
-	}
-	break;
-    }
-    return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *)f;
-    Elf64_Addr *opd = (Elf64_Addr *)(hfile->opd->contents);
-
-    opd[0] = 0;
-    opd[1] = 0;
-    if ((opd[2] = mod->init) != 0)
-    {
-	opd[3] = hfile->gp;
-	mod->init = hfile->opd->header.sh_addr;
-    }
-
-    opd[4] = 0;
-    opd[5] = 0;
-    if ((opd[6] = mod->cleanup) != 0)
-    {
-	opd[7] = hfile->gp;
-	mod->cleanup = hfile->opd->header.sh_addr + 32;
-    }
-
-    return 1;
-}
-
-/* XXX Is this relevant to parisc? */
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *archdata_sec)
-{
-    hppa64_file_t *hfile = (hppa64_file_t *)f;
-    struct archdata {
-	unsigned tgt_long unw_table;
-	unsigned tgt_long segment_base;
-	unsigned tgt_long unw_start;
-	unsigned tgt_long unw_end;
-	unsigned tgt_long gp;
-    } *ad;
-    int i;
-    struct obj_section *sec;
-
-    free(archdata_sec->contents);
-    archdata_sec->contents = xmalloc(sizeof(struct archdata));
-    memset(archdata_sec->contents, 0, sizeof(struct archdata));
-    archdata_sec->header.sh_size = sizeof(struct archdata);
-
-    ad = (struct archdata *)(archdata_sec->contents);
-    ad->gp = hfile->gp;
-    ad->unw_start = 0;
-    ad->unw_end = 0;
-    ad->unw_table = 0;
-    ad->segment_base = f->sections[1]->header.sh_addr;
-    for (i = 0; i < f->header.e_shnum; ++i)
-    {
-	sec = f->sections[i];
-	if (sec->header.sh_type == SHT_PARISC_UNWIND)
-	{
-	    ad->unw_start = sec->header.sh_addr;
-	    ad->unw_end = sec->header.sh_addr + sec->header.sh_size;
-	    break;
-	}
-    }
-
-    return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_i386.c b/mdk-stage1/insmod-modutils/obj/obj_i386.c
deleted file mode 100644
index fcbce8e04..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_i386.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* i386 specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct i386_got_entry
-{
-  int offset;
-  unsigned offset_done : 1;
-  unsigned reloc_done : 1;
-};
-
-struct i386_file
-{
-  struct obj_file root;
-  struct obj_section *got;
-};
-
-struct i386_symbol
-{
-  struct obj_symbol root;
-  struct i386_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct i386_file *f;
-  f = xmalloc(sizeof(*f));
-  f->got = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct i386_symbol *sym;
-  sym = xmalloc(sizeof(*sym));
-  memset(&sym->gotent, 0, sizeof(sym->gotent));
-  return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rel *rel,
-		       Elf32_Addr v)
-{
-  struct i386_file *ifile = (struct i386_file *)f;
-  struct i386_symbol *isym  = (struct i386_symbol *)sym;
-
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_386_NONE:
-      break;
-
-    case R_386_32:
-      *loc += v;
-      break;
-
-    case R_386_PLT32:
-    case R_386_PC32:
-      *loc += v - dot;
-      break;
-
-    case R_386_GLOB_DAT:
-    case R_386_JMP_SLOT:
-      *loc = v;
-      break;
-
-    case R_386_RELATIVE:
-      *loc += f->baseaddr;
-      break;
-
-    case R_386_GOTPC:
-      assert(got != 0);
-      *loc += got - dot;
-      break;
-
-    case R_386_GOT32:
-      assert(isym != NULL);
-      if (!isym->gotent.reloc_done)
-	{
-	  isym->gotent.reloc_done = 1;
-	  *(Elf32_Addr *)(ifile->got->contents + isym->gotent.offset) = v;
-	}
-      *loc += isym->gotent.offset;
-      break;
-
-    case R_386_GOTOFF:
-      assert(got != 0);
-      *loc += v - got;
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct i386_file *ifile = (struct i386_file *)f;
-  int i, n, offset = 0, gotneeded = 0;
-
-  n = ifile->root.header.e_shnum;
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *strsec;
-      Elf32_Rel *rel, *relend;
-      Elf32_Sym *symtab;
-      const char *strtab;
-
-      relsec = ifile->root.sections[i];
-      if (relsec->header.sh_type != SHT_REL)
-	continue;
-
-      symsec = ifile->root.sections[relsec->header.sh_link];
-      strsec = ifile->root.sections[symsec->header.sh_link];
-
-      rel = (Elf32_Rel *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rel));
-      symtab = (Elf32_Sym *)symsec->contents;
-      strtab = (const char *)strsec->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  struct i386_symbol *intsym;
-
-	  switch (ELF32_R_TYPE(rel->r_info))
-	    {
-	    case R_386_GOTPC:
-	    case R_386_GOTOFF:
-	      gotneeded = 1;
-	    default:
-	      continue;
-
-	    case R_386_GOT32:
-	      break;
-	    }
-
-	  obj_find_relsym(intsym, f, &ifile->root, rel, symtab, strtab);
-
-	  if (!intsym->gotent.offset_done)
-	    {
-	      intsym->gotent.offset_done = 1;
-	      intsym->gotent.offset = offset;
-	      offset += 4;
-	    }
-	}
-    }
-
-  if (offset > 0 || gotneeded)
-    ifile->got = obj_create_alloced_section(&ifile->root, ".got", 4, offset,
-					    SHF_WRITE);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_ia64.c b/mdk-stage1/insmod-modutils/obj/obj_ia64.c
deleted file mode 100644
index d207a9042..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_ia64.c
+++ /dev/null
@@ -1,1022 +0,0 @@
-/*
- * ia64 specific support for Elf loading and relocation.
- * Copyright 2000 Mike Stephens <mike.stephens@intel.com>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <string.h>
-#include <assert.h>
-#include <stdlib.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-#ifndef TRUE
-#define TRUE  ~FALSE
-#endif
-
-/*======================================================================*/
-
-typedef struct _ia64_opd_t
-{
-    int offset;
-    int reloc_done;
-} ia64_opd_t;
-
-typedef struct _ia64_plt_t
-{
-    struct _ia64_plt_t *next;
-    Elf64_Addr addend;
-    int text_offset;
-    int data_offset;
-    int reloc_done;
-} ia64_plt_t;
-
-typedef struct _ia64_got_t
-{
-    struct _ia64_got_t *next;
-    Elf64_Addr addend;
-    int offset;
-    int reloc_done;
-} ia64_got_t;
-
-typedef struct _ia64_symbol_t
-{
-    struct obj_symbol root;
-    ia64_got_t *gotent;
-    ia64_opd_t *opdent;
-    ia64_plt_t *pltent;
-} ia64_symbol_t;
-
-typedef struct _ia64_file_t
-{
-    struct obj_file root;
-    struct obj_section *got;
-    struct obj_section *opd;
-    struct obj_section *pltt;
-    struct obj_section *pltd;
-    Elf64_Addr gp;
-    Elf64_Addr text;
-    Elf64_Addr data;
-    Elf64_Addr bss;
-} ia64_file_t;
-
-/*
- * aa=gp rel address of the function descriptor in the .IA_64.pltoff section
- */
-unsigned char ia64_plt_local[] =
-{
-    0x0b, 0x78, 0x00, 0x02, 0x00, 0x24, /* [MMI] addl r15=aa,gp;;   */
-    0x00, 0x41, 0x3c, 0x30, 0x28, 0xc0, /*       ld8 r16=[r15],8    */
-    0x01, 0x08, 0x00, 0x84,             /*       mov r14=gp;;       */
-    0x11, 0x08, 0x00, 0x1e, 0x18, 0x10, /* [MIB] ld8 gp=[r15]       */
-    0x60, 0x80, 0x04, 0x80, 0x03, 0x00, /*       mov b6=r16         */
-    0x60, 0x00, 0x80, 0x00              /*       br.few b6;;        */
-};
-
-unsigned char ia64_plt_extern[] =
-{
-    0x0b, 0x80, 0x00, 0x02, 0x00, 0x24, /* [MMI] addl r16=aa,gp;;   */
-    0xf0, 0x00, 0x40, 0x30, 0x20, 0x00, /*       ld8 r15=[r16]      */
-    0x00, 0x00, 0x04, 0x00,             /*       nop.i 0x0;;        */
-    0x0b, 0x80, 0x20, 0x1e, 0x18, 0x14, /* [MMI] ld8 r16=[r15],8;;  */
-    0x10, 0x00, 0x3c, 0x30, 0x20, 0xc0, /*       ld8 gp=[r15]       */
-    0x00, 0x09, 0x00, 0x07,             /*       mov b6=r16;;       */
-    0x11, 0x00, 0x00, 0x00, 0x01, 0x00, /* [MIB] nop.m 0x0          */
-    0x00, 0x00, 0x00, 0x02, 0x00, 0x00, /*       nop.i 0x0          */
-    0x60, 0x00, 0x80, 0x00              /*       br.few b6;;        */
-};
-
-/*======================================================================*/
-
-/*
- * return the instruction at slot in bundle
- */
-Elf64_Xword
-obj_ia64_ins_extract_from_bundle(Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    switch (slot)
-    {
-    case 0 :
-	return (*bundle >> 5) & 0x1ffffffffff;
-
-    case 1 :
-	return (((*bundle >> 46) & 0x3ffff) |
-	    (*(bundle + 1) << 18)) & 0x1ffffffffff;
-
-    case 2 :
-	return (*(bundle + 1) >> 23) & 0x1ffffffffff;
-
-    default:
-    }
-    return (-1);
-}
-
-/*
- * insert a instruction at slot in bundle
- */
-void
-obj_ia64_ins_insert_in_bundle(Elf64_Addr *bundle, Elf64_Xword slot, Elf64_Xword ins)
-{
-    Elf64_Xword i;
-    Elf64_Xword in = ins & 0x1ffffffffff;
-
-    switch (slot)
-    {
-    case 0 :
-	i = *bundle & 0xffffc0000000001f;
-       *bundle = i | (in << 5);
-	break;
-
-    case 1 :
-	i = *bundle & 0x00003fffffffffff;
-	*bundle = i | (in << 46);
-
-	++bundle;
-	i = *bundle & 0xffffffffff800000;
-	*bundle = i | (in >> 18);
-	break;
-
-    case 2 :
-	++bundle;
-	i = *bundle & 0x00000000007fffff;
-	*bundle = i | (in << 23);
-	break;
-    }
-}
-
-/*
- * add a immediate 14 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm14(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffee07f01fff;
-    ins |= ((v & 0x2000) << 23) | ((v & 0x1f80) << 20) | ((v & 0x007f) << 13);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    if (((Elf64_Sxword) v > 8191) || ((Elf64_Sxword) v < -8192))
-	return obj_reloc_overflow;
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 22 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm22(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffe000301fff;
-    ins |= ((v & 0x200000) << 15) | ((v & 0x1f0000) << 6) |
-	   ((v & 0x00ff80) << 20) | ((v & 0x00007f) << 13);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    if (((Elf64_Sxword) v > 2097151) || ((Elf64_Sxword) v < -2097152))
-	return obj_reloc_overflow;
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 1) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21b(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffee00001fff;
-    ins |= ((v & 0x1000000) << 12) | ((v & 0x0fffff0) << 9);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 2) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21m(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffee000fe03f;
-    ins |= ((v & 0x1000000) << 12) | ((v & 0x0fff800) << 9) |
-	   ((v & 0x00007f0) << 2);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 21 value (form 3) to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_pcrel21f(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffeffc00003f;
-    ins |= ((v & 0x1000000) << 12) | ((v & 0x0fffff0) << 2);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    return obj_reloc_ok;
-}
-
-/*
- * add a immediate 64 value to the instruction at slot in bundle
- */
-enum obj_reloc
-obj_ia64_ins_imm64(Elf64_Xword v, Elf64_Addr *bundle, Elf64_Xword slot)
-{
-    Elf64_Xword ins;
-
-    assert(slot == 2);
-
-    ins = obj_ia64_ins_extract_from_bundle(bundle, slot);
-    ins &= 0xffffffe000101fff;
-    ins |= ((v & 0x8000000000000000) >> 27) | ((v & 0x0000000000200000)) |
-	   ((v & 0x00000000001f0000) <<  6) | ((v & 0x000000000000ff80) << 20) |
-	   ((v & 0x000000000000007f) << 13);
-    obj_ia64_ins_insert_in_bundle(bundle, slot, ins);
-    obj_ia64_ins_insert_in_bundle(bundle, --slot, ((v & 0x7fffffffffc00000) >> 22));
-    return obj_reloc_ok;
-}
-
-/*
- * create a plt entry
- */
-enum obj_reloc
-obj_ia64_generate_plt(Elf64_Addr v,
-		       Elf64_Addr gp,
-		       ia64_file_t *ifile,
-		       ia64_symbol_t *isym,
-		       ia64_plt_t *pltent)
-{
-    *(Elf64_Addr *)(ifile->pltd->contents + pltent->data_offset) = v;
-    if (isym->root.secidx <= SHN_HIRESERVE)
-    {
-	/* local entry */
-	*(Elf64_Addr *)(ifile->pltd->contents + pltent->data_offset + 8) = gp;
-	memcpy((Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset),
-	    ia64_plt_local, sizeof(ia64_plt_local));
-    }
-    else
-    {
-	/* external entry */
-	memcpy((Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset),
-	    ia64_plt_extern, sizeof(ia64_plt_extern));
-    }
-    return obj_ia64_ins_imm22(
-	(ifile->pltd->header.sh_addr + pltent->data_offset - gp),
-	(Elf64_Addr *)(ifile->pltt->contents + pltent->text_offset), 0);
-}
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-    ia64_file_t *f;
-    f = xmalloc(sizeof(*f));
-    f->got = NULL;
-    f->opd = NULL;
-    f->pltt = NULL;
-    f->pltd = NULL;
-    return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-    return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-    ia64_symbol_t *sym;
-    sym = xmalloc(sizeof(*sym));
-    sym->gotent = NULL;
-    sym->opdent = NULL;
-    sym->pltent = NULL;
-    return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    switch (sec->header.sh_type)
-    {
-    case SHT_IA_64_EXT :
-	sec->contents = NULL;
-	break;
-
-    case SHT_IA_64_UNWIND :
-	if (sec->header.sh_size > 0)
-	{
-	    sec->contents = xmalloc(sec->header.sh_size);
-	    gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
-	    if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
-	    {
-		error("error reading ELF section data: %m");
-		return -1;
-	    }
-	}
-	else
-	    sec->contents = NULL;
-	break;
-
-    default:
-      error("Unknown section header type: %08x", sec->header.sh_type);
-      return -1;
-    }
-    return 0;
-}
-
-int
-arch_create_got(struct obj_file *f)
-{
-    ia64_file_t *ifile = (ia64_file_t *)f;
-    int i;
-    int n;
-    int got_offset = 0;
-    int opd_offset = 32;
-    int plt_text_offset = 0;
-    int plt_data_offset = 0;
-
-    n = ifile->root.header.e_shnum;
-    for (i = 0; i < n; ++i)
-    {
-	struct obj_section *relsec, *symsec, *strsec;
-	Elf64_Rela *rel, *relend;
-	Elf64_Sym *symtab;
-	const char *strtab;
-
-	relsec = ifile->root.sections[i];
-	if (relsec->header.sh_type != SHT_RELA)
-	    continue;
-
-	symsec = ifile->root.sections[relsec->header.sh_link];
-	strsec = ifile->root.sections[symsec->header.sh_link];
-
-	rel = (Elf64_Rela *)relsec->contents;
-	relend = rel + (relsec->header.sh_size / sizeof(Elf64_Rela));
-	symtab = (Elf64_Sym *)symsec->contents;
-	strtab = (const char *)strsec->contents;
-
-	for (; rel < relend; ++rel)
-	{
-	    int need_got = FALSE;
-	    int need_opd = FALSE;
-	    int need_plt = FALSE;
-
-	    switch (ELF64_R_TYPE(rel->r_info))
-	    {
-	    default:
-		continue;
-
-	    case R_IA64_FPTR64I :       /* @fptr(sym + add), mov imm64 */
-	    case R_IA64_FPTR32LSB :     /* @fptr(sym + add), data4 LSB */
-	    case R_IA64_FPTR64LSB :     /* @fptr(sym + add), data8 LSB */
-		need_opd = TRUE;
-		break;
-
-	    case R_IA64_LTOFF22 :       /* @ltoff(sym + add), add imm22 */
-	    case R_IA64_LTOFF22X :
-	    case R_IA64_LTOFF64I :      /* @ltoff(sym + add), mov imm64 */
-		need_got = TRUE;
-		break;
-
-	    case R_IA64_LTOFF_FPTR22 :  /* @ltoff(@fptr(s+a)), imm22 */
-	    case R_IA64_LTOFF_FPTR64I : /* @ltoff(@fptr(s+a)), imm64 */
-	    case R_IA64_LTOFF_FPTR32LSB :
-	    case R_IA64_LTOFF_FPTR64LSB :
-		need_got = TRUE;
-		need_opd = TRUE;
-		break;
-
-	    case R_IA64_PLTOFF22 :      /* @pltoff(sym + add), add imm22 */
-	    case R_IA64_PLTOFF64I :     /* @pltoff(sym + add), mov imm64 */
-	    case R_IA64_PLTOFF64LSB :   /* @pltoff(sym + add), data8 LSB */
-
-	    case R_IA64_PCREL21B :      /* @pcrel(sym + add), ptb, call */
-	    case R_IA64_PCREL21M :      /* @pcrel(sym + add), chk.s */
-	    case R_IA64_PCREL21F :      /* @pcrel(sym + add), fchkf */
-		need_plt = TRUE;
-		break;
-	    }
-
-	    if (need_got || need_opd || need_plt)
-	    {
-		ia64_symbol_t *isym;
-		int            local;
-
-		obj_find_relsym(isym, f, f, rel, symtab, strtab);
-		local = isym->root.secidx <= SHN_HIRESERVE;
-
-		if (need_plt)
-		{
-		    ia64_plt_t *plt;
-
-		    for (plt = isym->pltent; plt != NULL; plt = plt->next)
-			if (plt->addend == rel->r_addend)
-			    break;
-		    if (plt == NULL)
-		    {
-			plt = (ia64_plt_t *) xmalloc(sizeof(ia64_plt_t));
-			plt->next = isym->pltent;
-			plt->addend = rel->r_addend;
-			plt->text_offset = plt_text_offset;
-			plt->data_offset = plt_data_offset;
-			plt->reloc_done = FALSE;
-			isym->pltent = plt;
-			if (local)
-			{
-			    plt_text_offset += sizeof(ia64_plt_local);
-			    plt_data_offset += 16;
-			}
-			else
-			{
-			    plt_text_offset += sizeof(ia64_plt_extern);
-			    plt_data_offset += 8;
-			}
-			need_plt = FALSE;
-		    }
-		}
-		if (need_got)
-		{
-		    ia64_got_t *got;
-
-		    for (got = isym->gotent; got != NULL; got = got->next)
-			if (got->addend == rel->r_addend)
-			    break;
-		    if (got == NULL)
-		    {
-			got = (ia64_got_t *) xmalloc(sizeof(ia64_got_t));
-			got->next = isym->gotent;
-			got->addend = rel->r_addend;
-			got->offset = got_offset;
-			got->reloc_done = FALSE;
-			isym->gotent = got;
-			got_offset += 8;
-			need_got = FALSE;
-		    }
-		}
-		if (need_opd && local)
-		{
-		    ia64_opd_t *opd;
-
-		    if (isym->opdent == NULL)
-		    {
-			opd = (ia64_opd_t *) xmalloc(sizeof(ia64_opd_t));
-			opd->offset = opd_offset;
-			opd->reloc_done = FALSE;
-			isym->opdent = opd;
-			opd_offset += 16;
-			need_opd = FALSE;
-		    }
-		}
-	    }
-	}
-    }
-
-    ifile->got = obj_create_alloced_section(f, ".got", 8, got_offset,
-					    SHF_WRITE | SHF_IA_64_SHORT);
-    assert(ifile->got != NULL);
-
-    ifile->opd = obj_create_alloced_section(f, ".opd", 16, opd_offset,
-					    SHF_WRITE | SHF_IA_64_SHORT);
-    assert(ifile->opd != NULL);
-
-    if (plt_text_offset > 0)
-    {
-	ifile->pltt = obj_create_alloced_section(f, ".plt", 16,
-						 plt_text_offset,
-						 SHF_WRITE | SHF_IA_64_SHORT);
-	ifile->pltd = obj_create_alloced_section(f, ".IA_64.pltoff", 16,
-						 plt_data_offset,
-						 SHF_WRITE | SHF_IA_64_SHORT);
-	assert(ifile->pltt != NULL);
-	assert(ifile->pltd != NULL);
-    }
-
-    return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
-    ia64_file_t *ifile = (ia64_file_t *)f;
-    Elf64_Addr min_addr = (Elf64_Addr) -1;
-    Elf64_Addr max_addr = 0;
-    Elf64_Addr min_short_addr = (Elf64_Addr) -1;
-    Elf64_Addr max_short_addr = 0;
-    Elf64_Addr gp;
-    Elf64_Addr text = (Elf64_Addr) -1;
-    Elf64_Addr data = (Elf64_Addr) -1;
-    Elf64_Addr bss = (Elf64_Addr) -1;
-    int        n = f->header.e_shnum;
-    int        i;
-
-    /*
-     * Finalize the addresses of the sections, find the min and max
-     * address of all sections marked short, and collect min and max
-     * address of any type, for use in selecting a nice gp.
-     *
-     * The algorithm used for selecting set the GP value was taken from
-     * the ld/bfd code contributed by David Mosberger-Tang <davidm@hpl.hp.com>
-     */
-    f->baseaddr = base;
-    for (i = 0; i < n; ++i)
-    {
-	Elf64_Shdr *header = &f->sections[i]->header;
-	Elf64_Addr lo;
-	Elf64_Addr hi;
-
-	header->sh_addr += base;
-	if (header->sh_flags & SHF_ALLOC)
-	{
-	    lo = header->sh_addr;
-	    hi = header->sh_addr + header->sh_size;
-	    if (hi < lo)
-		hi = (Elf64_Addr) -1;
-
-	    if (min_addr > lo)
-		min_addr = lo;
-	    if (max_addr < hi)
-		max_addr = hi;
-	    if (header->sh_flags & SHF_IA_64_SHORT)
-	    {
-		if (min_short_addr > lo)
-		    min_short_addr = lo;
-		if (max_short_addr < hi)
-		    max_short_addr = hi;
-	    }
-	    if ((header->sh_type & SHT_NOBITS) && (lo < bss))
-		bss = lo;
-	    else if ((header->sh_flags & SHF_EXECINSTR) && (lo < text))
-		text = lo;
-	    else if (lo < data)
-		data = lo;
-	}
-    }
-    /* Pick a sensible value for gp */
-
-    /* Start with just the address of the .got */
-    gp = ifile->got->header.sh_addr;
-
-    /*
-     * If it is possible to address the entire image, but we
-     * don't with the choice above, adjust.
-     */
-    if ((max_addr - min_addr < 0x400000) && (max_addr - gp <= 0x200000) &&
-	(gp - min_addr > 0x200000))
-    {
-	gp = min_addr + 0x200000;
-    }
-    else if (max_short_addr != 0)
-    {
-	/* If we don't cover all the short data, adjust */
-	if (max_short_addr - gp >= 0x200000)
-	    gp = min_short_addr + 0x200000;
-
-	/* If we're addressing stuff past the end, adjust back */
-	if (gp > max_addr)
-	    gp = max_addr - 0x200000 + 8;
-    }
-
-    /*
-     * Validate whether all SHF_IA_64_SHORT sections are within
-     * range of the chosen GP.
-     */
-    if (max_short_addr != 0)
-    {
-	if (max_short_addr - min_short_addr >= 0x400000)
-	{
-	    error("short data segment overflowed (0x%lx >= 0x400000)",
-		(unsigned long)(max_short_addr - min_short_addr));
-	    return 0;
-	}
-	else if (((gp > min_short_addr) && (gp - min_short_addr > 0x200000)) ||
-	    ((gp < max_short_addr) && (max_short_addr - gp >= 0x200000)))
-	{
-	    error("GP does not cover short data segment");
-	    return 0;
-	}
-    }
-    ifile->gp = gp;
-    ifile->text = text;
-    ifile->data = data;
-    ifile->bss = bss;
-    return 1;
-}
-
-/* Targets can be unaligned, use memcpy instead of assignment */
-#define COPY_64LSB(loc, v) \
-    do { \
-    Elf64_Xword reloc = (v); \
-    memcpy((void *)(loc), &reloc, 8); \
-    } while(0)
-#define COPY_32LSB(loc, v) \
-    do { \
-    Elf32_Xword reloc = (v); \
-    memcpy((void *)(loc), &reloc, 4); \
-    if ((v) != reloc) \
-	ret = obj_reloc_overflow; \
-    } while(0)
-
-enum obj_reloc
-arch_apply_relocation(struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf64_Rela *rel,
-		       Elf64_Addr v)
-{
-    ia64_file_t *ifile = (ia64_file_t *) f;
-    ia64_symbol_t *isym  = (ia64_symbol_t *) sym;
-
-    Elf64_Addr  loc = (Elf64_Addr)(targsec->contents + rel->r_offset);
-    Elf64_Addr  dot = (targsec->header.sh_addr + rel->r_offset) & ~0x03;
-
-    Elf64_Addr  got = ifile->got->header.sh_addr;
-    Elf64_Addr  gp = ifile->gp;
-
-    Elf64_Addr *bundle = (Elf64_Addr *)(loc & ~0x03);
-    Elf64_Xword slot = loc & 0x03;
-
-    Elf64_Xword r_info = ELF64_R_TYPE(rel->r_info);
-
-    enum obj_reloc ret = obj_reloc_ok;
-
-    /* We cannot load modules compiled with -mconstant-gp */
-#ifndef EF_IA_64_CONS_GP
-#define EF_IA_64_CONS_GP 0x00000040
-#endif
-#ifndef EF_IA_64_NOFUNCDESC_CONS_GP
-#define EF_IA_64_NOFUNCDESC_CONS_GP 0x00000080
-#endif
-    if (f->header.e_flags & (EF_IA_64_CONS_GP | EF_IA_64_NOFUNCDESC_CONS_GP))
-	return obj_reloc_constant_gp;
-
-    switch (r_info)
-    {
-    case R_IA64_NONE :          /* none */
-    case R_IA64_LDXMOV :        /* Use of LTOFF22X.  */
-	break;
-
-    case R_IA64_IMM14 :         /* symbol + addend, add imm14 */
-	ret = obj_ia64_ins_imm14(v, bundle, slot);
-	break;
-
-    case R_IA64_IMM22 :         /* symbol + addend, add imm22 */
-	ret = obj_ia64_ins_imm22(v, bundle, slot);
-	break;
-
-    case R_IA64_IMM64 :         /* symbol + addend, movl imm64 */
-	ret = obj_ia64_ins_imm64(v, bundle, slot);
-	break;
-
-    case R_IA64_DIR32LSB :      /* symbol + addend, data4 LSB */
-	COPY_32LSB(loc, v);
-	break;
-
-    case R_IA64_DIR64LSB :      /* symbol + addend, data8 LSB */
-	COPY_64LSB(loc, v);
-	break;
-
-    case R_IA64_GPREL22 :       /* @gprel(sym + add), add imm22 */
-	v -= gp;
-	ret = obj_ia64_ins_imm22(v, bundle, slot);
-	break;
-
-    case R_IA64_GPREL64I :      /* @gprel(sym + add), mov imm64 */
-	v -= gp;
-	ret = obj_ia64_ins_imm64(v, bundle, slot);
-	break;
-
-    case R_IA64_GPREL32LSB :    /* @gprel(sym + add), data4 LSB */
-	COPY_32LSB(loc, v-gp);
-	break;
-
-    case R_IA64_GPREL64LSB :    /* @gprel(sym + add), data8 LSB */
-	COPY_64LSB(loc, v-gp);
-	break;
-
-    case R_IA64_LTOFF22 :       /* @ltoff(sym + add), add imm22 */
-    case R_IA64_LTOFF22X :      /* LTOFF22, relaxable.  */
-    case R_IA64_LTOFF64I :      /* @ltoff(sym + add), mov imm64 */
-	{
-	    ia64_got_t *ge;
-
-	    assert(isym != NULL);
-	    for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
-		ge = ge->next;
-	    assert(ge != NULL);
-	    if (!ge->reloc_done)
-	    {
-		ge->reloc_done = TRUE;
-		*(Elf64_Addr *)(ifile->got->contents + ge->offset) = v;
-	    }
-	    v = got + ge->offset - gp;
-	    if (r_info == R_IA64_LTOFF64I)
-		ret = obj_ia64_ins_imm64(v, bundle, slot);
-	    else
-		ret = obj_ia64_ins_imm22(v, bundle, slot);
-	}
-	break;
-
-    case R_IA64_PLTOFF22 :      /* @pltoff(sym + add), add imm22 */
-    case R_IA64_PLTOFF64I :     /* @pltoff(sym + add), mov imm64 */
-    case R_IA64_PLTOFF64LSB :   /* @pltoff(sym + add), data8 LSB */
-	{
-	    ia64_plt_t *pe;
-
-	    assert(isym != NULL);
-	    for (pe = isym->pltent; pe != NULL && pe->addend != rel->r_addend; )
-		pe = pe->next;
-	    assert(pe != NULL);
-	    if (!pe->reloc_done)
-	    {
-		pe->reloc_done = TRUE;
-		ret = obj_ia64_generate_plt(v, gp, ifile, isym, pe);
-	    }
-	    v = ifile->pltt->header.sh_addr + pe->text_offset - gp;
-	    switch (r_info)
-	    {
-	    case R_IA64_PLTOFF22 :
-		ret = obj_ia64_ins_imm22(v, bundle, slot);
-		break;
-
-	    case R_IA64_PLTOFF64I :
-		ret = obj_ia64_ins_imm64(v, bundle, slot);
-		break;
-
-	    case R_IA64_PLTOFF64LSB :
-		COPY_64LSB(loc, v);
-		break;
-	    }
-	}
-	break;
-
-    case R_IA64_FPTR64I :       /* @fptr(sym + add), mov imm64 */
-    case R_IA64_FPTR32LSB :     /* @fptr(sym + add), data4 LSB */
-    case R_IA64_FPTR64LSB :     /* @fptr(sym + add), data8 LSB */
-	assert(isym != NULL);
-	if (isym->root.secidx <= SHN_HIRESERVE)
-	{
-	    assert(isym->opdent != NULL);
-	    if (!isym->opdent->reloc_done)
-	    {
-		isym->opdent->reloc_done = TRUE;
-		*(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset) = v;
-		*(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset + 8) = gp;
-	    }
-	    v = ifile->opd->header.sh_addr + isym->opdent->offset;
-	}
-	switch (r_info)
-	{
-	case R_IA64_FPTR64I :
-	    ret = obj_ia64_ins_imm64(v, bundle, slot);
-	    break;
-
-	case R_IA64_FPTR32LSB :
-	    COPY_32LSB(loc, v);
-	    break;
-
-	case R_IA64_FPTR64LSB :     /* @fptr(sym + add), data8 LSB */
-	    /* Target can be unaligned */
-	    COPY_64LSB(loc, v);
-	    break;
-	}
-	break;
-
-    case R_IA64_PCREL21B :      /* @pcrel(sym + add), ptb, call */
-    case R_IA64_PCREL21M :      /* @pcrel(sym + add), chk.s */
-    case R_IA64_PCREL21F :      /* @pcrel(sym + add), fchkf */
-	assert(isym != NULL);
-	if ((isym->root.secidx > SHN_HIRESERVE) ||
-	   ((Elf64_Sxword) (v - dot) > 16777215) ||
-	   ((Elf64_Sxword) (v - dot) < -16777216))
-	{
-	    ia64_plt_t *pe;
-
-	    for (pe = isym->pltent; pe != NULL && pe->addend != rel->r_addend; )
-		pe = pe->next;
-	    assert(pe != NULL);
-	    if (!pe->reloc_done)
-	    {
-		pe->reloc_done = TRUE;
-		ret = obj_ia64_generate_plt(v, gp, ifile, isym, pe);
-	    }
-	    v = ifile->pltt->header.sh_addr + pe->text_offset;
-	}
-	v -= dot;
-	switch (r_info)
-	{
-	case R_IA64_PCREL21B :
-	    ret = obj_ia64_ins_pcrel21b(v, bundle, slot);
-	    break;
-
-	case R_IA64_PCREL21M :
-	    ret = obj_ia64_ins_pcrel21m(v, bundle, slot);
-	    break;
-
-	case R_IA64_PCREL21F :
-	    ret = obj_ia64_ins_pcrel21f(v, bundle, slot);
-	    break;
-	}
-	break;
-
-    case R_IA64_PCREL32LSB :    /* @pcrel(sym + add), data4 LSB */
-	COPY_32LSB(loc, v-dot);
-	break;
-
-    case R_IA64_PCREL64LSB :    /* @pcrel(sym + add), data8 LSB */
-	COPY_64LSB(loc, v-dot);
-	break;
-
-    case R_IA64_LTOFF_FPTR22 :  /* @ltoff(@fptr(s+a)), imm22 */
-    case R_IA64_LTOFF_FPTR64I : /* @ltoff(@fptr(s+a)), imm64 */
-    case R_IA64_LTOFF_FPTR32LSB : /* @ltoff(@fptr(s+a)), data4 */
-    case R_IA64_LTOFF_FPTR64LSB : /* @ltoff(@fptr(s+a)), data8 */
-	{
-	    ia64_got_t *ge;
-
-	    assert(isym != NULL);
-	    if (isym->root.secidx <= SHN_HIRESERVE)
-	    {
-		assert(isym->opdent != NULL);
-		if (!isym->opdent->reloc_done)
-		{
-		    isym->opdent->reloc_done = TRUE;
-		    *(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset) = v;
-		    *(Elf64_Addr *)(ifile->opd->contents + isym->opdent->offset + 8) = gp;
-		}
-		v = ifile->opd->header.sh_addr + isym->opdent->offset;
-	    }
-	    for (ge = isym->gotent; ge != NULL && ge->addend != rel->r_addend; )
-		ge = ge->next;
-	    assert(ge != NULL);
-	    if (!ge->reloc_done)
-	    {
-		ge->reloc_done = TRUE;
-		*(Elf64_Addr *)(ifile->got->contents + ge->offset) =  v;
-	    }
-	    v = got + ge->offset - gp;
-	    switch (r_info)
-	    {
-	    case R_IA64_LTOFF_FPTR22 :
-		ret = obj_ia64_ins_imm22(v, bundle, slot);
-		break;
-
-	    case R_IA64_LTOFF_FPTR64I :
-		ret = obj_ia64_ins_imm64(v, bundle, slot);
-		break;
-
-	    case R_IA64_LTOFF_FPTR32LSB :
-		COPY_32LSB(loc, v);
-		break;
-
-	    case R_IA64_LTOFF_FPTR64LSB :
-		COPY_64LSB(loc, v);
-		break;
-	    }
-	}
-	break;
-
-    case R_IA64_SEGREL32LSB :   /* @segrel(sym + add), data4 LSB */
-    case R_IA64_SEGREL64LSB :   /* @segrel(sym + add), data8 LSB */
-	/* Only one segment for modules, see segment_base in arch_archdata */
-	v -= f->sections[1]->header.sh_addr;
-	if (r_info == R_IA64_SEGREL32LSB)
-	    COPY_32LSB(loc, v);
-	else
-	    COPY_64LSB(loc, v);
-	break;
-
-    case R_IA64_SECREL32LSB :   /* @secrel(sym + add), data4 LSB */
-	COPY_32LSB(loc, targsec->header.sh_addr - v);
-	break;
-
-    case R_IA64_SECREL64LSB :   /* @secrel(sym + add), data8 LSB */
-	COPY_64LSB(loc, targsec->header.sh_addr - v);
-	break;
-
-    /*
-     * We don't handle the big-endian relocates
-     *
-     * R_IA64_DIR32MSB        symbol + addend, data4 MSB
-     * R_IA64_DIR64MSB        symbol + addend, data8 MSB
-     * R_IA64_GPREL32MSB      @gprel(sym + add), data4 MSB
-     * R_IA64_GPREL64MSB      @gprel(sym + add), data8 MSB
-     * R_IA64_PLTOFF64MSB     @pltoff(sym + add), data8 MSB
-     * R_IA64_FPTR32MSB       @fptr(sym + add), data4 MSB
-     * R_IA64_FPTR64MSB       @fptr(sym + add), data8 MSB
-     * R_IA64_PCREL32MSB      @pcrel(sym + add), data4 MSB
-     * R_IA64_PCREL64MSB      @pcrel(sym + add), data8 MSB
-     * R_IA64_SEGREL32MSB     @segrel(sym + add), data4 MSB
-     * R_IA64_SEGREL64MSB     @segrel(sym + add), data8 MSB
-     * R_IA64_SECREL32MSB     @secrel(sym + add), data4 MSB
-     * R_IA64_SECREL64MSB     @secrel(sym + add), data8 MSB
-     * R_IA64_REL32MSB        data 4 + REL
-     * R_IA64_REL64MSB        data 8 + REL
-     * R_IA64_LTV32MSB        symbol + addend, data4 MSB
-     * R_IA64_LTV64MSB        symbol + addend, data8 MSB
-     * R_IA64_IPLTMSB         dynamic reloc, imported PLT, MSB
-     */
-    default:
-    case R_IA64_REL32LSB :      /* data 4 + REL */
-    case R_IA64_REL64LSB :      /* data 8 + REL */
-    case R_IA64_LTV32LSB :      /* symbol + addend, data4 LSB */
-    case R_IA64_LTV64LSB :      /* symbol + addend, data8 LSB */
-    case R_IA64_IPLTLSB :       /* dynamic reloc, imported PLT, LSB */
-	ret = obj_reloc_unhandled;
-	break;
-    }
-    return ret;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-    ia64_file_t *ifile = (ia64_file_t *)f;
-    Elf64_Addr *opd = (Elf64_Addr *)(ifile->opd->contents);
-
-    if ((opd[0] = mod->init) != 0)
-    {
-	opd[1] = ifile->gp;
-	mod->init = ifile->opd->header.sh_addr;
-    }
-
-    if ((opd[2] = mod->cleanup) != 0)
-    {
-	opd[3] = ifile->gp;
-	mod->cleanup = ifile->opd->header.sh_addr + 16;
-    }
-
-    return 1;
-}
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *archdata_sec)
-{
-    ia64_file_t *ifile = (ia64_file_t *)f;
-    struct archdata {
-	unsigned tgt_long unw_table;
-	unsigned tgt_long segment_base;
-	unsigned tgt_long unw_start;
-	unsigned tgt_long unw_end;
-	unsigned tgt_long gp;
-    } *ad;
-    int i;
-    struct obj_section *sec;
-
-    free(archdata_sec->contents);
-    archdata_sec->contents = xmalloc(sizeof(struct archdata));
-    memset(archdata_sec->contents, 0, sizeof(struct archdata));
-    archdata_sec->header.sh_size = sizeof(struct archdata);
-
-    ad = (struct archdata *)(archdata_sec->contents);
-    ad->gp = ifile->gp;
-    ad->unw_start = 0;
-    ad->unw_end = 0;
-    ad->unw_table = 0;
-    ad->segment_base = f->sections[1]->header.sh_addr;
-    for (i = 0; i < f->header.e_shnum; ++i)
-    {
-	sec = f->sections[i];
-	if (sec->header.sh_type == SHT_IA_64_UNWIND)
-	{
-	    ad->unw_start = sec->header.sh_addr;
-	    ad->unw_end = sec->header.sh_addr + sec->header.sh_size;
-	    break;
-	}
-    }
-
-    return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c b/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c
deleted file mode 100644
index 1836141e9..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_kallsyms.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/* Build a section containing all non-stack symbols.
-   Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <string.h>
-#include <malloc.h>
-
-#include "obj.h"
-#include "kallsyms.h"
-#include "util.h"
-
-/*======================================================================*/
-
-#define EXPAND_BY 4096  /* Arbitrary */
-
-/* Append a string to the big list of strings */
-
-static void
-append_string (const char *s, char **strings,
-	       ElfW(Word) *strings_size, ElfW(Word) *strings_left)
-{
-    size_t l = strlen(s) + 1;
-    while (l > *strings_left) {
-	*strings = xrealloc(*strings, *strings_size += EXPAND_BY);
-	*strings_left += EXPAND_BY;
-    }
-    memcpy((char *)*strings+*strings_size-*strings_left, s, l);
-    *strings_left -= l;
-}
-
-
-/* Append a symbol to the big list of symbols */
-
-static void
-append_symbol (const struct kallsyms_symbol *s,
-	       struct kallsyms_symbol **symbols,
-	       ElfW(Word) *symbols_size, ElfW(Word) *symbols_left)
-{
-    size_t l = sizeof(*s);
-    while (l > *symbols_left) {
-	*symbols = xrealloc(*symbols, *symbols_size += EXPAND_BY);
-	*symbols_left += EXPAND_BY;
-    }
-    memcpy((char *)*symbols+*symbols_size-*symbols_left, s, l);
-    *symbols_left -= l;
-}
-
-/* qsort compare routine to sort symbols */
-
-static const char *sym_strings;
-
-static int
-symbol_compare (const void *a, const void *b)
-{
-    struct kallsyms_symbol *c = (struct kallsyms_symbol *) a;
-    struct kallsyms_symbol *d = (struct kallsyms_symbol *) b;
-
-    if (c->symbol_addr > d->symbol_addr)
-	return(1);
-    if (c->symbol_addr < d->symbol_addr)
-	return(-1);
-    return(strcmp(sym_strings+c->name_off, sym_strings+d->name_off));
-}
-
-
-/* Extract all symbols from the input obj_file, ignore ones that are
- * no use for debugging, build an output obj_file containing only the
- * kallsyms section.
- *
- * The kallsyms section is a bit unusual.  It deliberately has no
- * relocatable data, all "pointers" are represented as byte offsets
- * into the the section.  This means it can be stored anywhere without
- * relocation problems.  In particular it can be stored within a kernel
- * image, it can be stored separately from the kernel image, it can be
- * appended to a module just before loading, it can be stored in a
- * separate area etc.
- *
- * Format of the kallsyms section.
- *
- * Header:
- *   Size of header.
- *   Total size of kallsyms data, including strings.
- *   Number of loaded sections.
- *   Offset to first section entry from start of header.
- *   Size of each section entry, excluding the name string.
- *   Number of symbols.
- *   Offset to first symbol entry from start of header.
- *   Size of each symbol entry, excluding the name string.
- *
- * Section entry - one per loaded section.
- *   Start of section[1].
- *   Size of section.
- *   Offset to name of section, from start of strings.
- *   Section flags.
- *
- * Symbol entry - one per symbol in the input file[2].
- *   Offset of section that owns this symbol, from start of section data.
- *   Address of symbol within the real section[1].
- *   Offset to name of symbol, from start of strings.
- *
- * Notes: [1] This is an exception to the "represent pointers as
- *            offsets" rule, it is a value, not an offset.  The start
- *            address of a section or a symbol is extracted from the
- *            obj_file data which may contain absolute or relocatable
- *            addresses.  If the addresses are relocatable then the
- *            caller must adjust the section and/or symbol entries in
- *            kallsyms after relocation.
- *        [2] Only symbols that fall within loaded sections are stored.
- */
-
-int
-obj_kallsyms (struct obj_file *fin, struct obj_file **fout_result)
-{
-    struct obj_file *fout;
-    int i, loaded = 0, *fin_to_allsym_map;
-    struct obj_section *isec, *osec;
-    struct kallsyms_header *a_hdr;
-    struct kallsyms_section *a_sec;
-    ElfW(Off) sec_off;
-    struct kallsyms_symbol *symbols = NULL, a_sym;
-    ElfW(Word) symbols_size = 0, symbols_left = 0;
-    char *strings = NULL, *p;
-    ElfW(Word) strings_size = 0, strings_left = 0;
-    ElfW(Off) file_offset;
-    static char strtab[] = "\000" KALLSYMS_SEC_NAME;
-
-    /* Create the kallsyms section.  */
-    fout = arch_new_file();
-    memset(fout, 0, sizeof(*fout));
-    fout->symbol_cmp = strcmp;
-    fout->symbol_hash = obj_elf_hash;
-    fout->load_order_search_start = &fout->load_order;
-
-    /* Copy file characteristics from input file and modify to suit */
-    memcpy(&fout->header, &fin->header, sizeof(fout->header));
-    fout->header.e_type = ET_REL;		/* Output is relocatable */
-    fout->header.e_entry = 0;			/* No entry point */
-    fout->header.e_phoff = 0;			/* No program header */
-    file_offset = sizeof(fout->header);		/* Step over Elf header */
-    fout->header.e_shoff = file_offset;		/* Section headers next */
-    fout->header.e_phentsize = 0;		/* No program header */
-    fout->header.e_phnum = 0;			/* No program header */
-    fout->header.e_shnum = KALLSYMS_IDX+1;	/* Initial, strtab, kallsyms */
-    fout->header.e_shstrndx = KALLSYMS_IDX-1;	/* strtab */
-    file_offset += fout->header.e_shentsize * fout->header.e_shnum;
-
-    /* Populate the section data for kallsyms itself */
-    fout->sections = xmalloc(sizeof(*(fout->sections))*fout->header.e_shnum);
-    memset(fout->sections, 0, sizeof(*(fout->sections))*fout->header.e_shnum);
-
-    fout->sections[0] = osec = arch_new_section();
-    memset(osec, 0, sizeof(*osec));
-    osec->header.sh_type = SHT_NULL;
-    osec->header.sh_link = SHN_UNDEF;
-
-    fout->sections[KALLSYMS_IDX-1] = osec = arch_new_section();
-    memset(osec, 0, sizeof(*osec));
-    osec->name = ".strtab";
-    osec->header.sh_type = SHT_STRTAB;
-    osec->header.sh_link = SHN_UNDEF;
-    osec->header.sh_offset = file_offset;
-    osec->header.sh_size = sizeof(strtab);
-    osec->contents = xmalloc(sizeof(strtab));
-    memcpy(osec->contents, strtab, sizeof(strtab));
-    file_offset += osec->header.sh_size;
-
-    fout->sections[KALLSYMS_IDX] = osec = arch_new_section();
-    memset(osec, 0, sizeof(*osec));
-    osec->name = KALLSYMS_SEC_NAME;
-    osec->header.sh_name = 1;			/* Offset in strtab */
-    osec->header.sh_type = SHT_PROGBITS;	/* Load it */
-    osec->header.sh_flags = SHF_ALLOC;		/* Read only data */
-    osec->header.sh_link = SHN_UNDEF;
-    osec->header.sh_addralign = sizeof(ElfW(Word));
-    file_offset = (file_offset + osec->header.sh_addralign - 1)
-	& -(osec->header.sh_addralign);
-    osec->header.sh_offset = file_offset;
-
-    /* How many loaded sections are there? */
-    for (i = 0; i < fin->header.e_shnum; ++i) {
-	if (fin->sections[i]->header.sh_flags & SHF_ALLOC)
-	    ++loaded;
-    }
-
-    /* Initial contents, header + one entry per input section.  No strings. */
-    osec->header.sh_size = sizeof(*a_hdr) + loaded*sizeof(*a_sec);
-    a_hdr = (struct kallsyms_header *) osec->contents =
-    	xmalloc(osec->header.sh_size);
-    memset(osec->contents, 0, osec->header.sh_size);
-    a_hdr->size = sizeof(*a_hdr);
-    a_hdr->sections = loaded;
-    a_hdr->section_off = a_hdr->size;
-    a_hdr->section_size = sizeof(*a_sec);
-    a_hdr->symbol_off = osec->header.sh_size;
-    a_hdr->symbol_size = sizeof(a_sym);
-    a_hdr->start = (ElfW(Addr))(~0);
-
-    /* Map input section numbers to kallsyms section offsets. */
-    sec_off = 0;	/* Offset to first kallsyms section entry */
-    fin_to_allsym_map = xmalloc(sizeof(*fin_to_allsym_map)*fin->header.e_shnum);
-    for (i = 0; i < fin->header.e_shnum; ++i) {
-	isec = fin->sections[i];
-	if (isec->header.sh_flags & SHF_ALLOC) {
-	    fin_to_allsym_map[isec->idx] = sec_off;
-	    sec_off += a_hdr->section_size;
-	}
-	else
-	    fin_to_allsym_map[isec->idx] = -1;	/* Ignore this section */
-    }
-
-    /* Copy the loaded section data. */
-    a_sec = (struct kallsyms_section *) ((char *) a_hdr + a_hdr->section_off);
-    for (i = 0; i < fin->header.e_shnum; ++i) {
-	isec = fin->sections[i];
-	if (!(isec->header.sh_flags & SHF_ALLOC))
-	    continue;
-	a_sec->start = isec->header.sh_addr;
-	a_sec->size = isec->header.sh_size;
-	a_sec->flags = isec->header.sh_flags;
-	a_sec->name_off = strings_size - strings_left;
-	append_string(isec->name, &strings, &strings_size, &strings_left);
-	if (a_sec->start < a_hdr->start)
-	    a_hdr->start = a_sec->start;
-	if (a_sec->start+a_sec->size > a_hdr->end)
-	    a_hdr->end = a_sec->start+a_sec->size;
-	++a_sec;
-    }
-
-    /* Build the kallsyms symbol table from the symbol hashes. */
-    for (i = 0; i < HASH_BUCKETS; ++i) {
-	struct obj_symbol *sym = fin->symtab[i];
-	for (sym = fin->symtab[i]; sym ; sym = sym->next) {
-	    if (!sym || sym->secidx >= fin->header.e_shnum)
-		continue;
-	    if ((a_sym.section_off = fin_to_allsym_map[sym->secidx]) == -1)
-		continue;
-	    if (strcmp(sym->name, "gcc2_compiled.") == 0 ||
-		strncmp(sym->name, "__insmod_", 9) == 0)
-		continue;
-	    a_sym.symbol_addr = sym->value;
-	    if (fin->header.e_type == ET_REL)
-		a_sym.symbol_addr += fin->sections[sym->secidx]->header.sh_addr;
-	    a_sym.name_off = strings_size - strings_left;
-	    append_symbol(&a_sym, &symbols, &symbols_size, &symbols_left);
-	    append_string(sym->name, &strings, &strings_size, &strings_left);
-	    ++a_hdr->symbols;
-	}
-    }
-    free(fin_to_allsym_map);
-
-    /* Sort the symbols into ascending order by address and name */
-    sym_strings = strings;	/* For symbol_compare */
-    qsort((char *) symbols, (unsigned) a_hdr->symbols,
-	sizeof(* symbols), symbol_compare);
-    sym_strings = NULL;
-
-    /* Put the lot together */
-    osec->header.sh_size = a_hdr->total_size =
-	a_hdr->symbol_off +
-	a_hdr->symbols*a_hdr->symbol_size +
-	strings_size - strings_left;
-    a_hdr = (struct kallsyms_header *) osec->contents =
-	xrealloc(a_hdr, a_hdr->total_size);
-    p = (char *)a_hdr + a_hdr->symbol_off;
-    memcpy(p, symbols, a_hdr->symbols*a_hdr->symbol_size);
-    free(symbols);
-    p += a_hdr->symbols*a_hdr->symbol_size;
-    a_hdr->string_off = p - (char *)a_hdr;
-    memcpy(p, strings, strings_size - strings_left);
-    free(strings);
-
-    *fout_result = fout;
-    return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_load.c b/mdk-stage1/insmod-modutils/obj/obj_load.c
deleted file mode 100644
index 62977acb7..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_load.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/* Elf file reader.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-   obj_free() added by Bj�rn Ekwall <bj0rn@blox.se> March 1999
-   Support for kallsyms Keith Owens <kaos@ocs.com.au> April 2000
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <alloca.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-#include "obj.h"
-#include "util.h"
-
-/*======================================================================*/
-
-struct obj_file *
-obj_load (int fp, Elf32_Half e_type, const char *filename)
-{
-  struct obj_file *f;
-  ElfW(Shdr) *section_headers;
-  int shnum, i;
-  char *shstrtab;
-
-  /* Read the file header.  */
-
-  f = arch_new_file();
-  memset(f, 0, sizeof(*f));
-  f->symbol_cmp = strcmp;
-  f->symbol_hash = obj_elf_hash;
-  f->load_order_search_start = &f->load_order;
-
-  gzf_lseek(fp, 0, SEEK_SET);
-  if (gzf_read(fp, &f->header, sizeof(f->header)) != sizeof(f->header))
-    {
-      error("cannot read ELF header from %s", filename);
-      return NULL;
-    }
-
-  if (f->header.e_ident[EI_MAG0] != ELFMAG0
-      || f->header.e_ident[EI_MAG1] != ELFMAG1
-      || f->header.e_ident[EI_MAG2] != ELFMAG2
-      || f->header.e_ident[EI_MAG3] != ELFMAG3)
-    {
-      error("%s is not an ELF file", filename);
-      return NULL;
-    }
-  if (f->header.e_ident[EI_CLASS] != ELFCLASSM
-      || f->header.e_ident[EI_DATA] != ELFDATAM
-      || f->header.e_ident[EI_VERSION] != EV_CURRENT
-      || !MATCH_MACHINE(f->header.e_machine))
-    {
-      error("ELF file %s not for this architecture", filename);
-      return NULL;
-    }
-  if (f->header.e_type != e_type && e_type != ET_NONE)
-    {
-      switch (e_type) {
-      case ET_REL:
-	error("ELF file %s not a relocatable object", filename);
-	break;
-      case ET_EXEC:
-	error("ELF file %s not an executable object", filename);
-	break;
-      default:
-	error("ELF file %s has wrong type, expecting %d got %d",
-		filename, e_type, f->header.e_type);
-	break;
-      }
-      return NULL;
-    }
-
-  /* Read the section headers.  */
-
-  if (f->header.e_shentsize != sizeof(ElfW(Shdr)))
-    {
-      error("section header size mismatch %s: %lu != %lu",
-	    filename,
-	    (unsigned long)f->header.e_shentsize,
-	    (unsigned long)sizeof(ElfW(Shdr)));
-      return NULL;
-    }
-
-  shnum = f->header.e_shnum;
-  f->sections = xmalloc(sizeof(struct obj_section *) * shnum);
-  memset(f->sections, 0, sizeof(struct obj_section *) * shnum);
-
-  section_headers = alloca(sizeof(ElfW(Shdr)) * shnum);
-  gzf_lseek(fp, f->header.e_shoff, SEEK_SET);
-  if (gzf_read(fp, section_headers, sizeof(ElfW(Shdr))*shnum) != sizeof(ElfW(Shdr))*shnum)
-    {
-      error("error reading ELF section headers %s: %m", filename);
-      return NULL;
-    }
-
-  /* Read the section data.  */
-
-  for (i = 0; i < shnum; ++i)
-    {
-      struct obj_section *sec;
-
-      f->sections[i] = sec = arch_new_section();
-      memset(sec, 0, sizeof(*sec));
-
-      sec->header = section_headers[i];
-      sec->idx = i;
-
-      switch (sec->header.sh_type)
-	{
-	case SHT_NULL:
-	case SHT_NOTE:
-	case SHT_NOBITS:
-	  /* ignore */
-	  break;
-
-	case SHT_PROGBITS:
-	case SHT_SYMTAB:
-	case SHT_STRTAB:
-	case SHT_RELM:
-	  if (sec->header.sh_size > 0)
-	    {
-	      sec->contents = xmalloc(sec->header.sh_size);
-	      gzf_lseek(fp, sec->header.sh_offset, SEEK_SET);
-	      if (gzf_read(fp, sec->contents, sec->header.sh_size) != sec->header.sh_size)
-		{
-		  error("error reading ELF section data %s: %m", filename);
-		  return NULL;
-		}
-	    }
-	  else
-	    sec->contents = NULL;
-	  break;
-
-#if SHT_RELM == SHT_REL
-	case SHT_RELA:
-	  if (sec->header.sh_size) {
-	    error("RELA relocations not supported on this architecture %s", filename);
-	    return NULL;
-	  }
-	  break;
-#else
-	case SHT_REL:
-	  if (sec->header.sh_size) {
-	    error("REL relocations not supported on this architecture %s", filename);
-	    return NULL;
-	  }
-	  break;
-#endif
-
-	default:
-	  if (sec->header.sh_type >= SHT_LOPROC)
-	    {
-	      if (arch_load_proc_section(sec, fp) < 0)
-		return NULL;
-	      break;
-	    }
-
-	  error("can't handle sections of type %ld %s",
-		(long)sec->header.sh_type, filename);
-	  return NULL;
-	}
-    }
-
-  /* Do what sort of interpretation as needed by each section.  */
-
-  shstrtab = f->sections[f->header.e_shstrndx]->contents;
-
-  for (i = 0; i < shnum; ++i)
-    {
-      struct obj_section *sec = f->sections[i];
-      sec->name = shstrtab + sec->header.sh_name;
-    }
-
-  for (i = 0; i < shnum; ++i)
-    {
-      struct obj_section *sec = f->sections[i];
-
-      /* .modinfo and .modstring should be contents only but gcc has no
-       *  attribute for that.  The kernel may have marked these sections as
-       *  ALLOC, ignore the allocate bit.
-       */
-      if (strcmp(sec->name, ".modinfo") == 0 ||
-	  strcmp(sec->name, ".modstring") == 0)
-	sec->header.sh_flags &= ~SHF_ALLOC;
-
-      if (sec->header.sh_flags & SHF_ALLOC)
-	obj_insert_section_load_order(f, sec);
-
-      switch (sec->header.sh_type)
-	{
-	case SHT_SYMTAB:
-	  {
-	    unsigned long nsym, j;
-	    char *strtab;
-	    ElfW(Sym) *sym;
-
-	    if (sec->header.sh_entsize != sizeof(ElfW(Sym)))
-	      {
-		error("symbol size mismatch %s: %lu != %lu",
-		      filename,
-		      (unsigned long)sec->header.sh_entsize,
-		      (unsigned long)sizeof(ElfW(Sym)));
-		return NULL;
-	      }
-
-	    nsym = sec->header.sh_size / sizeof(ElfW(Sym));
-	    strtab = f->sections[sec->header.sh_link]->contents;
-	    sym = (ElfW(Sym) *) sec->contents;
-
-	    /* Allocate space for a table of local symbols.  */
-	    j = f->local_symtab_size = sec->header.sh_info;
-	    f->local_symtab = xmalloc(j *= sizeof(struct obj_symbol *));
-	    memset(f->local_symtab, 0, j);
-
-	    /* Insert all symbols into the hash table.  */
-	    for (j = 1, ++sym; j < nsym; ++j, ++sym)
-	      {
-		const char *name;
-		if (sym->st_name)
-		  name = strtab+sym->st_name;
-		else
-		  name = f->sections[sym->st_shndx]->name;
-
-		obj_add_symbol(f, name, j, sym->st_info, sym->st_shndx,
-			       sym->st_value, sym->st_size);
-
-	      }
-	  }
-	break;
-	}
-    }
-
-  /* second pass to add relocation data to symbols */
-  for (i = 0; i < shnum; ++i)
-    {
-      struct obj_section *sec = f->sections[i];
-      switch (sec->header.sh_type)
-	{
-	case SHT_RELM:
-	  {
-	    unsigned long nrel, j, nsyms;
-	    ElfW(RelM) *rel;
-	    struct obj_section *symtab;
-	    char *strtab;
-	    if (sec->header.sh_entsize != sizeof(ElfW(RelM)))
-	      {
-		error("relocation entry size mismatch %s: %lu != %lu",
-		      filename,
-		      (unsigned long)sec->header.sh_entsize,
-		      (unsigned long)sizeof(ElfW(RelM)));
-		return NULL;
-	      }
-
-	    nrel = sec->header.sh_size / sizeof(ElfW(RelM));
-	    rel = (ElfW(RelM) *) sec->contents;
-	    symtab = f->sections[sec->header.sh_link];
-	    nsyms = symtab->header.sh_size / symtab->header.sh_entsize;
-	    strtab = f->sections[symtab->header.sh_link]->contents;
-
-	    /* Save the relocate type in each symbol entry.  */
-	    for (j = 0; j < nrel; ++j, ++rel)
-	      {
-		struct obj_symbol *intsym;
-		unsigned long symndx;
-		symndx = ELFW(R_SYM)(rel->r_info);
-		if (symndx)
-		  {
-		    if (symndx >= nsyms)
-		      {
-			error("%s: Bad symbol index: %08lx >= %08lx",
-			      filename, symndx, nsyms);
-			continue;
-		      }
-
-		    obj_find_relsym(intsym, f, f, rel, (ElfW(Sym) *)(symtab->contents), strtab);
-		    intsym->r_type = ELFW(R_TYPE)(rel->r_info);
-		  }
-	      }
-	  }
-	  break;
-	}
-    }
-
-  f->filename = xstrdup(filename);
-
-  return f;
-}
-
-void obj_free(struct obj_file *f)
-{
-	struct obj_section *sec;
-	struct obj_symbol *sym;
-	struct obj_symbol *next;
-	int i;
-	int n;
-
-	if (f->sections) {
-		n = f->header.e_shnum;
-		for (i = 0; i < n; ++i) {
-			if ((sec = f->sections[i]) != NULL) {
-				if (sec->contents)
-					free(sec->contents);
-				free(sec);
-			}
-		}
-		free(f->sections);
-	}
-
-	for (i = 0; i < HASH_BUCKETS; ++i) {
-		for (sym = f->symtab[i]; sym; sym = next) {
-			next = sym->next;
-			free(sym);
-		}
-	}
-
-	if (f->local_symtab)
-		free(f->local_symtab);
-
-	if (f->filename)
-		free((char *)(f->filename));
-
-	if (f->persist)
-		free((char *)(f->persist));
-
-	free(f);
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_m68k.c b/mdk-stage1/insmod-modutils/obj/obj_m68k.c
deleted file mode 100644
index abc070bca..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_m68k.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* m68k specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rela *rel,
-		       Elf32_Addr v)
-{
-  char *loc = targsec->contents + rel->r_offset;
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_68K_NONE:
-      break;
-
-    case R_68K_8:
-      if (v > 0xff)
-	ret = obj_reloc_overflow;
-      *(char *)loc = v;
-      break;
-    case R_68K_16:
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *(short *)loc = v;
-      break;
-    case R_68K_32:
-      *(int *)loc = v;
-      break;
-
-    case R_68K_PC8:
-      v -= dot;
-      if ((Elf32_Sword)v > 0x7f || (Elf32_Sword)v < -(Elf32_Sword)0x80)
-	ret = obj_reloc_overflow;
-      *(char *)loc = v;
-      break;
-    case R_68K_PC16:
-      v -= dot;
-      if ((Elf32_Sword)v > 0x7fff || (Elf32_Sword)v < -(Elf32_Sword)0x8000)
-	ret = obj_reloc_overflow;
-      *(short *)loc = v;
-      break;
-    case R_68K_PC32:
-      *(int *)loc = v - dot;
-      break;
-
-    case R_68K_RELATIVE:
-      *(int *)loc += ef->baseaddr;
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_mips.c b/mdk-stage1/insmod-modutils/obj/obj_mips.c
deleted file mode 100644
index 2db0791b6..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_mips.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* MIPS specific support for Elf loading and relocation.
-   Copyright 1997, 1998 Linux International.
-   Contributed by Ralf Baechle <ralf@gnu.ai.mit.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <string.h>
-#include <stdlib.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct mips_hi16
-{
-  struct mips_hi16 *next;
-  Elf32_Addr *addr;
-  Elf32_Addr value;
-};
-
-struct mips_file
-{
-  struct obj_file root;
-  struct mips_hi16 *mips_hi16_list;
-};
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct mips_file *mf;
-
-  mf = xmalloc(sizeof(*mf));
-  mf->mips_hi16_list = NULL;
-
-  return (struct obj_file *) mf;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-  switch (sec->header.sh_type)
-    {
-    case SHT_MIPS_DEBUG:
-    case SHT_MIPS_REGINFO:
-      /* Actually these two sections are as useless as something can be ...  */
-      sec->contents = NULL;
-      break;
-
-    case SHT_MIPS_LIBLIST:
-    case SHT_MIPS_CONFLICT:
-    case SHT_MIPS_GPTAB:
-    case SHT_MIPS_UCODE:
-    case SHT_MIPS_OPTIONS:
-    case SHT_MIPS_DWARF:
-    case SHT_MIPS_EVENTS:
-      /* These shouldn't ever be in a module file.  */
-      error("Unhandled section header type: %08x", sec->header.sh_type);
-
-    default:
-      /* We don't even know the type.  This time it might as well be a
-	 supernova.  */
-      error("Unknown section header type: %08x", sec->header.sh_type);
-      return -1;
-    }
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rel *rel,
-		       Elf32_Addr v)
-{
-  struct mips_file *mf = (struct mips_file *)f;
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  enum obj_reloc ret = obj_reloc_ok;
-
-  /* _gp_disp is a magic symbol for PIC which is not supported for
-     the kernel and loadable modules.  */
-  if (strcmp(sym->name, "_gp_disp") == 0)
-	ret = obj_reloc_unhandled;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_MIPS_NONE:
-      break;
-
-    case R_MIPS_32:
-      *loc += v;
-      break;
-
-    case R_MIPS_26:
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      if ((v & 0xf0000000) != ((dot + 4) & 0xf0000000))
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x03ffffff) | ((*loc + (v >> 2)) & 0x03ffffff);
-      break;
-
-    case R_MIPS_HI16:
-      {
-	struct mips_hi16 *n;
-
-	/* We cannot relocate this one now because we don't know the value
-	   of the carry we need to add.  Save the information, and let LO16
-	   do the actual relocation.  */
-	n = (struct mips_hi16 *) xmalloc (sizeof *n);
-	n->addr = loc;
-	n->value = v;
-	n->next = mf->mips_hi16_list;
-	mf->mips_hi16_list = n;
-	break;
-      }
-
-    case R_MIPS_LO16:
-      {
-	unsigned long insnlo = *loc;
-	Elf32_Addr val, vallo;
-
-	/* Sign extend the addend we extract from the lo insn.  */
-	vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
-
-	if (mf->mips_hi16_list != NULL)
-	  {
-	    struct mips_hi16 *l;
-
-	    l = mf->mips_hi16_list;
-	    while (l != NULL)
-	      {
-		struct mips_hi16 *next;
-		unsigned long insn;
-
-		/* The value for the HI16 had best be the same. */
-		assert(v == l->value);
-
-		/* Do the HI16 relocation.  Note that we actually don't
-		   need to know anything about the LO16 itself, except where
-		   to find the low 16 bits of the addend needed by the LO16.  */
-		insn = *l->addr;
-		val = ((insn & 0xffff) << 16) + vallo;
-		val += v;
-
-		/* Account for the sign extension that will happen in the
-		   low bits.  */
-		val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
-
-		insn = (insn &~ 0xffff) | val;
-		*l->addr = insn;
-
-		next = l->next;
-		free(l);
-		l = next;
-	      }
-
-	    mf->mips_hi16_list = NULL;
-	  }
-
-	/* Ok, we're done with the HI16 relocs.  Now deal with the LO16.  */
-	val = v + vallo;
-	insnlo = (insnlo & ~0xffff) | (val & 0xffff);
-	*loc = insnlo;
-	break;
-      }
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *archdata_sec)
-{
-  struct archdata {
-    unsigned tgt_long __start___dbe_table;
-    unsigned tgt_long __stop___dbe_table;
-  } *ad;
-  struct obj_section *sec;
-
-  if (archdata_sec->contents)
-    free(archdata_sec->contents);
-  archdata_sec->header.sh_size = 0;
-  sec = obj_find_section(f, "__dbe_table");
-  if (sec) {
-    ad = (struct archdata *) (archdata_sec->contents) = xmalloc(sizeof(*ad));
-    memset(ad, 0, sizeof(*ad));
-    archdata_sec->header.sh_size = sizeof(*ad);
-    ad->__start___dbe_table = sec->header.sh_addr;
-    ad->__stop___dbe_table = sec->header.sh_addr + sec->header.sh_size;
-  }
-
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_ppc.c b/mdk-stage1/insmod-modutils/obj/obj_ppc.c
deleted file mode 100644
index 4889454f2..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_ppc.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/* PowerPC specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Adapted by Paul Mackerras <paulus@cs.anu.edu.au> from the
-   obj-sparc.c and obj-alpha.c files.
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-#include <assert.h>
-
-
-/*======================================================================*/
-
-/*
- * Unfortunately, the bl (branch-and-link) instruction used for
- * procedure calls on the PowerPC can only reach +/- 32MB from the
- * current instruction.  If the module is loaded far enough away from
- * the main kernel text (or other modules) that this limit is
- * exceeded, we have to redirect procedure calls via a procedure
- * linkage table (PLT).  Each entry in the PLT contains instructions
- * to put the address of the procedure in a register and jump to it.
- */
-
-typedef unsigned int instruction;	/* a powerpc instruction (4 bytes) */
-
-struct ppc_plt_entry
-{
-  struct ppc_plt_entry *next;
-  ElfW(Addr) addend;
-  int offset;
-  int inited;
-};
-
-struct ppc_file
-{
-  struct obj_file file;
-  struct obj_section *plt;
-};
-
-struct ppc_symbol
-{
-  struct obj_symbol sym;
-  struct ppc_plt_entry *plt_entries;
-};
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct ppc_file *f;
-
-  f = xmalloc(sizeof(struct ppc_file));
-  f->plt = NULL;
-  return &f->file;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct ppc_symbol *p;
-
-  p = xmalloc(sizeof(struct ppc_symbol));
-  p->plt_entries = NULL;
-  return &p->sym;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rela *rel,
-		       Elf32_Addr v)
-{
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  struct ppc_file *pf = (struct ppc_file *) ef;
-  struct ppc_symbol *psym = (struct ppc_symbol *) sym;
-  struct ppc_plt_entry *pe;
-  instruction *ip;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_PPC_ADDR16_HA:
-      *(unsigned short *)loc = (v + 0x8000) >> 16;
-      break;
-
-    case R_PPC_ADDR16_HI:
-      *(unsigned short *)loc = v >> 16;
-      break;
-
-    case R_PPC_ADDR16_LO:
-      *(unsigned short *)loc = v;
-      break;
-
-    case R_PPC_REL24:
-      /* find the plt entry and initialize it if necessary */
-      assert(psym != NULL);
-      for (pe = psym->plt_entries; pe != NULL && pe->addend != rel->r_addend; )
-	pe = pe->next;
-      assert(pe != NULL);
-      if (!pe->inited)
-	{
-	  ip = (instruction *) (pf->plt->contents + pe->offset);
-	  ip[0] = 0x3d600000 + ((v + 0x8000) >> 16);  /* lis r11,sym@ha */
-	  ip[1] = 0x396b0000 + (v & 0xffff);	      /* addi r11,r11,sym@l */
-	  ip[2] = 0x7d6903a6;			      /* mtctr r11 */
-	  ip[3] = 0x4e800420;			      /* bctr */
-	  pe->inited = 1;
-	}
-
-      v -= dot;
-      if ((int)v < -0x02000000 || (int)v >= 0x02000000)
-	{
-	  /* go via the plt */
-	  v = pf->plt->header.sh_addr + pe->offset - dot;
-	}
-      if (v & 3)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x03fffffc) | (v & 0x03fffffc);
-      break;
-
-    case R_PPC_REL32:
-      *loc = v - dot;
-      break;
-
-    case R_PPC_ADDR32:
-      *loc = v;
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct ppc_file *pf = (struct ppc_file *) f;
-  int i, offset;
-  struct obj_section *sec, *syms, *strs;
-  ElfW(Rela) *rel, *relend;
-  ElfW(Sym) *symtab;
-  const char *strtab;
-  struct ppc_symbol *intsym;
-  struct ppc_plt_entry *pe;
-
-  offset = 0;
-  for (i = 0; i < f->header.e_shnum; ++i)
-    {
-      sec = f->sections[i];
-      if (sec->header.sh_type != SHT_RELM)
-	continue;
-      syms = f->sections[sec->header.sh_link];
-      strs = f->sections[syms->header.sh_link];
-
-      rel = (ElfW(RelM) *) sec->contents;
-      relend = rel + (sec->header.sh_size / sizeof(ElfW(RelM)));
-      symtab = (ElfW(Sym) *) syms->contents;
-      strtab = (const char *) strs->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  if (ELF32_R_TYPE(rel->r_info) != R_PPC_REL24)
-	    continue;
-	  obj_find_relsym(intsym, f, f, rel, symtab, strtab);
-
-	  for (pe = intsym->plt_entries; pe != NULL; pe = pe->next)
-	    if (pe->addend == rel->r_addend)
-	      break;
-	  if (pe == NULL)
-	    {
-	      pe = xmalloc(sizeof(struct ppc_plt_entry));
-	      pe->next = intsym->plt_entries;
-	      pe->addend = rel->r_addend;
-	      pe->offset = offset;
-	      pe->inited = 0;
-	      intsym->plt_entries = pe;
-	      offset += 16;
-	    }
-	}
-    }
-
-  pf->plt = obj_create_alloced_section(f, ".plt", 16, offset, SHF_WRITE);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *f, struct obj_section *archdata_sec)
-{
-  struct archdata {
-    unsigned tgt_long __start___ftr_fixup;
-    unsigned tgt_long __stop___ftr_fixup;
-  } *ad;
-  struct obj_section *sec;
-
-  if (archdata_sec->contents)
-    free(archdata_sec->contents);
-  archdata_sec->header.sh_size = 0;
-  sec = obj_find_section(f, "__ftr_fixup");
-  if (sec) {
-    ad = (struct archdata *) (archdata_sec->contents) = xmalloc(sizeof(*ad));
-    memset(ad, 0, sizeof(*ad));
-    archdata_sec->header.sh_size = sizeof(*ad);
-    ad->__start___ftr_fixup = sec->header.sh_addr;
-    ad->__stop___ftr_fixup = sec->header.sh_addr + sec->header.sh_size;
-  }
-
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_reloc.c b/mdk-stage1/insmod-modutils/obj/obj_reloc.c
deleted file mode 100644
index 3f2c8aab0..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_reloc.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/* Elf relocation routines.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <string.h>
-#include <assert.h>
-#include <alloca.h>
-
-#include <obj.h>
-#include <util.h>
-
-/*======================================================================*/
-
-int
-obj_string_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-		 const char *string)
-{
-  struct obj_string_patch_struct *p;
-  struct obj_section *strsec;
-  size_t len = strlen(string)+1;
-  char *loc;
-
-  p = xmalloc(sizeof(*p));
-  p->next = f->string_patches;
-  p->reloc_secidx = secidx;
-  p->reloc_offset = offset;
-  f->string_patches = p;
-
-  strsec = obj_find_section(f, ".kstrtab");
-  if (strsec == NULL)
-    {
-      strsec = obj_create_alloced_section(f, ".kstrtab", 1, len, 0);
-      p->string_offset = 0;
-      loc = strsec->contents;
-    }
-  else
-    {
-      p->string_offset = strsec->header.sh_size;
-      loc = obj_extend_section(strsec, len);
-    }
-  memcpy(loc, string, len);
-
-  return 1;
-}
-
-int
-obj_symbol_patch(struct obj_file *f, int secidx, ElfW(Addr) offset,
-		 struct obj_symbol *sym)
-{
-  struct obj_symbol_patch_struct *p;
-
-  p = xmalloc(sizeof(*p));
-  p->next = f->symbol_patches;
-  p->reloc_secidx = secidx;
-  p->reloc_offset = offset;
-  p->sym = sym;
-  f->symbol_patches = p;
-
-  return 1;
-}
-
-int
-obj_check_undefineds(struct obj_file *f, int quiet)
-{
-  unsigned long i;
-  int ret = 1;
-
-  for (i = 0; i < HASH_BUCKETS; ++i)
-    {
-      struct obj_symbol *sym;
-      for (sym = f->symtab[i]; sym ; sym = sym->next)
-	if (sym->secidx == SHN_UNDEF)
-	  {
-	    if (ELFW(ST_BIND)(sym->info) == STB_WEAK)
-	      {
-		sym->secidx = SHN_ABS;
-		sym->value = 0;
-	      }
-	    else if (sym->r_type) /* assumes R_arch_NONE is 0 on all arch */
-	      {
-		if (!quiet)
-			error("unresolved symbol %s", sym->name);
-		ret = 0;
-	      }
-	  }
-    }
-
-  return ret;
-}
-
-void
-obj_clear_undefineds(struct obj_file *f)
-{
-  unsigned long i;
-  struct obj_symbol *sym;
-  for (i = 0; i < HASH_BUCKETS; ++i)
-    {
-      for (sym = f->symtab[i]; sym ; sym = sym->next)
-	if (sym->secidx == SHN_UNDEF)
-	  {
-	    sym->secidx = SHN_ABS;
-	    sym->value = 0;
-	  }
-    }
-}
-
-void
-obj_allocate_commons(struct obj_file *f)
-{
-  struct common_entry
-  {
-    struct common_entry *next;
-    struct obj_symbol *sym;
-  } *common_head = NULL;
-
-  unsigned long i;
-
-  for (i = 0; i < HASH_BUCKETS; ++i)
-    {
-      struct obj_symbol *sym;
-      for (sym = f->symtab[i]; sym ; sym = sym->next)
-	if (sym->secidx == SHN_COMMON)
-	  {
-	    /* Collect all COMMON symbols and sort them by size so as to
-	       minimize space wasted by alignment requirements.  */
-	    {
-	      struct common_entry **p, *n;
-	      for (p = &common_head; *p ; p = &(*p)->next)
-		if (sym->size <= (*p)->sym->size)
-		  break;
-
-	      n = alloca(sizeof(*n));
-	      n->next = *p;
-	      n->sym = sym;
-	      *p = n;
-	    }
-	  }
-    }
-
-  for (i = 1; i < f->local_symtab_size; ++i)
-    {
-      struct obj_symbol *sym = f->local_symtab[i];
-      if (sym && sym->secidx == SHN_COMMON)
-	{
-	  struct common_entry **p, *n;
-	  for (p = &common_head; *p ; p = &(*p)->next)
-	    if (sym == (*p)->sym)
-	      break;
-	    else if (sym->size < (*p)->sym->size)
-	      {
-		n = alloca(sizeof(*n));
-		n->next = *p;
-		n->sym = sym;
-		*p = n;
-		break;
-	      }
-	}
-    }
-
-  if (common_head)
-    {
-      /* Find the bss section.  */
-      for (i = 0; i < f->header.e_shnum; ++i)
-	if (f->sections[i]->header.sh_type == SHT_NOBITS)
-	  break;
-
-      /* If for some reason there hadn't been one, create one.  */
-      if (i == f->header.e_shnum)
-	{
-	  struct obj_section *sec;
-
-	  f->sections = xrealloc(f->sections, (i+1) * sizeof(sec));
-	  f->sections[i] = sec = arch_new_section();
-	  f->header.e_shnum = i+1;
-
-	  memset(sec, 0, sizeof(*sec));
-	  sec->header.sh_type = SHT_PROGBITS;
-	  sec->header.sh_flags = SHF_WRITE|SHF_ALLOC;
-	  sec->name = ".bss";
-	  sec->idx = i;
-	}
-
-      /* Allocate the COMMONS.  */
-      {
-	ElfW(Addr) bss_size = f->sections[i]->header.sh_size;
-	ElfW(Addr) max_align = f->sections[i]->header.sh_addralign;
-	struct common_entry *c;
-
-	for (c = common_head; c ; c = c->next)
-	  {
-	    ElfW(Addr) align = c->sym->value;
-
-	    if (align > max_align)
-	      max_align = align;
-	    if (bss_size & (align - 1))
-	      bss_size = (bss_size | (align - 1)) + 1;
-
-	    c->sym->secidx = i;
-	    c->sym->value = bss_size;
-
-	    bss_size += c->sym->size;
-	  }
-
-	f->sections[i]->header.sh_size = bss_size;
-	f->sections[i]->header.sh_addralign = max_align;
-      }
-    }
-
-  /* For the sake of patch relocation and parameter initialization,
-     allocate zeroed data for NOBITS sections now.  Note that after
-     this we cannot assume NOBITS are really empty.  */
-  for (i = 0; i < f->header.e_shnum; ++i)
-    {
-      struct obj_section *s = f->sections[i];
-      if (s->header.sh_type == SHT_NOBITS)
-	{
-	  if (s->header.sh_size)
-	    s->contents = memset(xmalloc(s->header.sh_size),
-				 0, s->header.sh_size);
-	  else
-	    s->contents = NULL;
-	  s->header.sh_type = SHT_PROGBITS;
-	}
-    }
-}
-
-unsigned long
-obj_load_size (struct obj_file *f)
-{
-  unsigned long dot = 0;
-  struct obj_section *sec;
-
-  /* Finalize the positions of the sections relative to one another.  */
-
-  for (sec = f->load_order; sec ; sec = sec->load_next)
-    {
-      ElfW(Addr) align;
-
-      align = sec->header.sh_addralign;
-      if (align && (dot & (align - 1)))
-	dot = (dot | (align - 1)) + 1;
-
-      sec->header.sh_addr = dot;
-      dot += sec->header.sh_size;
-    }
-
-  return dot;
-}
-
-int
-obj_relocate (struct obj_file *f, ElfW(Addr) base)
-{
-  int i, n = f->header.e_shnum;
-  int ret = 1;
-
-  /* Finalize the addresses of the sections.  */
-
-  arch_finalize_section_address(f, base);
-
-  /* And iterate over all of the relocations.  */
-
-  for (i = 0; i < n; ++i)
-    {
-      struct obj_section *relsec, *symsec, *targsec, *strsec;
-      ElfW(RelM) *rel, *relend;
-      ElfW(Sym) *symtab;
-      const char *strtab;
-      unsigned long nsyms;
-
-      relsec = f->sections[i];
-      if (relsec->header.sh_type != SHT_RELM)
-	continue;
-
-      symsec = f->sections[relsec->header.sh_link];
-      targsec = f->sections[relsec->header.sh_info];
-      strsec = f->sections[symsec->header.sh_link];
-
-      if (!(targsec->header.sh_flags & SHF_ALLOC))
-	continue;
-
-      rel = (ElfW(RelM) *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(ElfW(RelM)));
-      symtab = (ElfW(Sym) *)symsec->contents;
-      nsyms = symsec->header.sh_size / symsec->header.sh_entsize;
-      strtab = (const char *)strsec->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  ElfW(Addr) value = 0;
-	  struct obj_symbol *intsym = NULL;
-	  unsigned long symndx;
-	  const char *errmsg;
-
-	  /* Attempt to find a value to use for this relocation.  */
-
-	  symndx = ELFW(R_SYM)(rel->r_info);
-	  if (symndx)
-	    {
-	      /* Note we've already checked for undefined symbols.  */
-
-	      if (symndx >= nsyms)
-		{
-		  error("Bad symbol index: %08lx >= %08lx",
-			symndx, nsyms);
-		  continue;
-		}
-
-	      obj_find_relsym(intsym, f, f, rel, symtab, strtab);
-	      value = obj_symbol_final_value(f, intsym);
-	    }
-
-#if SHT_RELM == SHT_RELA
-	  value += rel->r_addend;
-#endif
-
-	  /* Do it! */
-	  switch (arch_apply_relocation(f,targsec,symsec,intsym,rel,value))
-	    {
-	    case obj_reloc_ok:
-	      break;
-
-	    case obj_reloc_overflow:
-	      errmsg = "Relocation overflow";
-	      goto bad_reloc;
-	    case obj_reloc_dangerous:
-	      errmsg = "Dangerous relocation";
-	      goto bad_reloc;
-	    case obj_reloc_unhandled:
-	      errmsg = "Unhandled relocation";
-	      goto bad_reloc;
-	    case obj_reloc_constant_gp:
-	      errmsg = "Modules compiled with -mconstant-gp cannot be loaded";
-	      goto bad_reloc;
-	    bad_reloc:
-		  error("%s of type %ld for %s", errmsg,
-		    (long)ELFW(R_TYPE)(rel->r_info), intsym->name);
-	      ret = 0;
-	      break;
-	    }
-	}
-    }
-
-  /* Finally, take care of the patches.  */
-
-  if (f->string_patches)
-    {
-      struct obj_string_patch_struct *p;
-      struct obj_section *strsec;
-      ElfW(Addr) strsec_base;
-      strsec = obj_find_section(f, ".kstrtab");
-      strsec_base = strsec->header.sh_addr;
-
-      for (p = f->string_patches; p ; p = p->next)
-	{
-	  struct obj_section *targsec = f->sections[p->reloc_secidx];
-	  *(ElfW(Addr) *)(targsec->contents + p->reloc_offset)
-	    = strsec_base + p->string_offset;
-	}
-    }
-
-  if (f->symbol_patches)
-    {
-      struct obj_symbol_patch_struct *p;
-
-      for (p = f->symbol_patches; p; p = p->next)
-	{
-	  struct obj_section *targsec = f->sections[p->reloc_secidx];
-	  *(ElfW(Addr) *)(targsec->contents + p->reloc_offset)
-	    = obj_symbol_final_value(f, p->sym);
-	}
-    }
-
-  return ret;
-}
-
-int
-obj_create_image (struct obj_file *f, char *image)
-{
-  struct obj_section *sec;
-  ElfW(Addr) base = f->baseaddr;
-
-  for (sec = f->load_order; sec ; sec = sec->load_next)
-    {
-      char *secimg;
-
-      if (sec->contents == 0)
-	continue;
-
-      secimg = image + (sec->header.sh_addr - base);
-
-      /* Note that we allocated data for NOBITS sections earlier.  */
-      memcpy(secimg, sec->contents, sec->header.sh_size);
-    }
-
-  return 1;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_s390.c b/mdk-stage1/insmod-modutils/obj/obj_s390.c
deleted file mode 100644
index a76e28479..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_s390.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/* IBM S/390 31-bit specific support for Elf loading and relocation.
-   Copyright 2000, 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation.
-
-   Contributed by Martin Schwidefsky <schwidefsky@de.ibm.com>
-
-   Derived from obj/obj_i386.c:
-     Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <string.h>
-#include <assert.h>
-
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct s390_plt_entry
-{
-  long offset;
-  int  allocated:1;
-  int  initialized:1;
-};
-
-struct s390_got_entry
-{
-  long offset;
-  unsigned allocated:1;
-  unsigned reloc_done : 1;
-};
-
-struct s390_file
-{
-  struct obj_file root;
-  struct obj_section *plt;
-  struct obj_section *got;
-};
-
-struct s390_symbol
-{
-  struct obj_symbol root;
-  struct s390_plt_entry pltent;
-  struct s390_got_entry gotent;
-};
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  struct s390_file *f;
-  f = xmalloc(sizeof(*f));
-  f->got = NULL;
-  f->plt = NULL;
-  return &f->root;
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  struct s390_symbol *sym;
-  sym = xmalloc(sizeof(*sym));
-  memset(&sym->gotent, 0, sizeof(sym->gotent));
-  memset(&sym->pltent, 0, sizeof(sym->pltent));
-  return &sym->root;
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *f,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rela *rel,
-		       Elf32_Addr v)
-{
-  struct s390_file *ifile = (struct s390_file *) f;
-  struct s390_symbol *isym  = (struct s390_symbol *) sym;
-  struct s390_plt_entry *pe;
-
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-  Elf32_Addr got = ifile->got ? ifile->got->header.sh_addr : 0;
-  Elf32_Addr plt = ifile->plt ? ifile->plt->header.sh_addr : 0;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_390_NONE:
-      break;
-
-    case R_390_32:
-      *(unsigned int *) loc += v;
-      break;
-    case R_390_16:
-      *(unsigned short *) loc += v;
-      break;
-    case R_390_8:
-      *(unsigned char *) loc += v;
-      break;
-
-    case R_390_PC32:
-      *(unsigned int *) loc += v - dot;
-      break;
-    case R_390_PC16DBL:
-      *(unsigned short *) loc += (v - dot) >> 1;
-      break;
-    case R_390_PC16: 
-      *(unsigned short *) loc += v - dot;
-      break;
-
-    case R_390_PLT32:
-    case R_390_PLT16DBL:
-      /* find the plt entry and initialize it.  */
-      assert(isym != NULL);
-      pe = (struct s390_plt_entry *) &isym->pltent;
-      assert(pe->allocated);
-      if (pe->initialized == 0) {
-        unsigned int *ip = (unsigned int *)(ifile->plt->contents + pe->offset); 
-        ip[0] = 0x0d105810; /* basr 1,0; lg 1,10(1); br 1 */
-        ip[1] = 0x100607f1;
-       if (ELF32_R_TYPE(rel->r_info) == R_390_PLT16DBL)
-         ip[2] = v - 2;
-       else
-         ip[2] = v;
-        pe->initialized = 1;
-      }
-
-      /* Insert relative distance to target.  */
-      v = plt + pe->offset - dot;
-      if (ELF32_R_TYPE(rel->r_info) == R_390_PLT32)
-        *(unsigned int *) loc = (unsigned int) v;
-      else if (ELF32_R_TYPE(rel->r_info) == R_390_PLT16DBL)
-        *(unsigned short *) loc = (unsigned short) ((v + 2) >> 1);
-      break;
-
-    case R_390_GLOB_DAT:
-    case R_390_JMP_SLOT:
-      *loc = v;
-      break;
-
-    case R_390_RELATIVE:
-      *loc += f->baseaddr;
-      break;
-
-    case R_390_GOTPC:
-      assert(got != 0);
-      *(unsigned long *) loc += got - dot;
-      break;
-
-    case R_390_GOT12:
-    case R_390_GOT16:
-    case R_390_GOT32:
-      assert(isym != NULL);
-      assert(got != 0);
-      if (!isym->gotent.reloc_done)
-	{
-	  isym->gotent.reloc_done = 1;
-	  *(Elf32_Addr *)(ifile->got->contents + isym->gotent.offset) = v;
-	}
-      if (ELF32_R_TYPE(rel->r_info) == R_390_GOT12)
-        *(unsigned short *) loc |= (*(unsigned short *) loc + isym->gotent.offset) & 0xfff;
-      else if (ELF32_R_TYPE(rel->r_info) == R_390_GOT16)
-        *(unsigned short *) loc += isym->gotent.offset;
-      else if (ELF32_R_TYPE(rel->r_info) == R_390_GOT32)
-        *(unsigned int *) loc += isym->gotent.offset;
-      break;
-
-    case R_390_GOTOFF:
-      assert(got != 0);
-      *loc += v - got;
-      break;
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *f)
-{
-  struct s390_file *ifile = (struct s390_file *) f;
-  int i, got_offset = 0, plt_offset = 0, gotneeded = 0;
-
-  for (i = 0; i < f->header.e_shnum; ++i)
-    {
-      struct obj_section *relsec, *symsec, *strsec;
-      Elf32_Rela *rel, *relend;
-      Elf32_Sym *symtab;
-      const char *strtab;
-
-      relsec = f->sections[i];
-      if (relsec->header.sh_type != SHT_RELA)
-	continue;
-
-      symsec = f->sections[relsec->header.sh_link];
-      strsec = f->sections[symsec->header.sh_link];
-
-      rel = (Elf32_Rela *)relsec->contents;
-      relend = rel + (relsec->header.sh_size / sizeof(Elf32_Rela));
-      symtab = (Elf32_Sym *)symsec->contents;
-      strtab = (const char *)strsec->contents;
-
-      for (; rel < relend; ++rel)
-	{
-	  struct s390_symbol *intsym;
-          struct s390_plt_entry *pe;
-          struct s390_got_entry *ge;
-
-          switch (ELF32_R_TYPE(rel->r_info)) {
-            /* These four relocations refer to a plt entry.  */
-            case R_390_PLT16DBL:
-            case R_390_PLT32:
-	      obj_find_relsym(intsym, f, f, rel, symtab, strtab);
-              assert(intsym);
-              pe = &intsym->pltent;
-              if (!pe->allocated) {
-                pe->allocated = 1;
-                pe->offset = plt_offset;
-                plt_offset += 12;
-              }
-              break;
-            /* The next three don't need got entries but the address
-               of the got itself.  */
-	    case R_390_GOTPC:
-	    case R_390_GOTOFF:
-	      gotneeded = 1;
-              break;
-
-            case R_390_GOT12:
-            case R_390_GOT16:
-	    case R_390_GOT32:
-	      obj_find_relsym(intsym, f, f, rel, symtab, strtab);
-              assert(intsym);
-              ge = (struct s390_got_entry *) &intsym->gotent;
-              if (!ge->allocated) {
-                ge->allocated = 1;
-                ge->offset = got_offset;
-                got_offset += sizeof(void*);
-	    }
-	      break;
-
-            default:
-              break;
-	    }
-	}
-    }
-
-  if (got_offset > 0 || gotneeded) {
-    struct obj_section *gotsec;
-    struct obj_symbol *gotsym;
-
-    gotsec = obj_find_section(f, ".got");
-    if (gotsec == NULL)
-      gotsec = obj_create_alloced_section(f, ".got", 4, got_offset, SHF_WRITE);
-    else
-      obj_extend_section(gotsec, got_offset);
-    gotsym = obj_add_symbol(f, "_GLOBAL_OFFSET_TABLE_", -1,
-                            ELFW(ST_INFO) (STB_LOCAL, STT_OBJECT),
-                            gotsec->idx, 0, 0);
-    gotsym->secidx = gotsec->idx;  /* mark the symbol as defined */
-    ifile->got = gotsec;
-  }
-
-  if (plt_offset > 0)
-    ifile->plt = obj_create_alloced_section(f, ".plt", 4, plt_offset,
-					    SHF_WRITE);
-
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int         
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{    
-  int  i, n = f->header.e_shnum;
-             
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;  
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
-
diff --git a/mdk-stage1/insmod-modutils/obj/obj_sparc.c b/mdk-stage1/insmod-modutils/obj/obj_sparc.c
deleted file mode 100644
index d1eb3da44..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_sparc.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* Sparc specific support for Elf loading and relocation.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  return xmalloc(sizeof(struct obj_symbol));
-}
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf32_Rela *rel,
-		       Elf32_Addr v)
-{
-  Elf32_Addr *loc = (Elf32_Addr *)(targsec->contents + rel->r_offset);
-  Elf32_Addr dot = targsec->header.sh_addr + rel->r_offset;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF32_R_TYPE(rel->r_info))
-    {
-    case R_SPARC_NONE:
-      break;
-    case R_SPARC_8:
-      if (v > 0xff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xff) | (v & 0xff);
-      break;
-    case R_SPARC_16:
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xffff) | (v & 0xffff);
-      break;
-    case R_SPARC_32:
-      *loc = v;
-      break;
-    case R_SPARC_DISP8:
-      v -= dot;
-      if (v > 0xff)
-        ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xff) | (v & 0xff);
-      break;
-    case R_SPARC_DISP16:
-      v -= dot;
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xffff) | (v & 0xffff);
-      break;
-    case R_SPARC_DISP32:
-      v -= dot;
-      *loc = v;
-      break;
-    case R_SPARC_WDISP30:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x3fffffff) | (v >> 2);
-      break;
-    case R_SPARC_WDISP22:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x3fffff) | ((v >> 2) & 0x3fffff);
-      break;
-    case R_SPARC_HI22:
-      *loc = (*loc & ~0x3fffff) | (v >> 10);
-      break;
-    case R_SPARC_22:
-      if (v > 0x3fffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3fffff) | (v & 0x3fffff);
-      break;
-    case R_SPARC_13:
-      if (v > 0x1fff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x1fff) | (v & 0x1fff);
-      break;
-    case R_SPARC_LO10:
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-
-    case R_SPARC_PC10:
-      v -= dot;
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_PC22:
-      v -= dot;
-      *loc = (*loc & ~0x3fffff) | (v >> 10);
-      break;
-
-    case R_SPARC_UA32:
-      *(((char *)loc) + 0) = (char)(v >> 24);
-      *(((char *)loc) + 1) = (char)(v >> 16);
-      *(((char *)loc) + 2) = (char)(v >> 8);
-      *(((char *)loc) + 3) = (char)v;
-      break;
-
-#ifdef R_SPARC_10
-    case R_SPARC_10:
-      if (v > 0x3ff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_11:
-      if (v > 0x7ff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x7ff) | (v & 0x7ff);
-      break;
-    case R_SPARC_WDISP16:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x303fff) | ((v << 4) & 0x300000) | ((v >> 2) & 0x3fff);
-      break;
-    case R_SPARC_WDISP19:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x7ffff) | ((v >> 2) & 0x7ffff);
-      break;
-    case R_SPARC_7:
-      if (v > 0x7f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x7f) | (v & 0x7f);
-      break;
-    case R_SPARC_5:
-      if (v > 0x1f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x1f) | (v & 0x1f);
-      break;
-    case R_SPARC_6:
-      if (v > 0x3f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3f) | (v & 0x3f);
-      break;
-#endif /* R_SPARC_10 */
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf32_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/obj/obj_sparc64.c b/mdk-stage1/insmod-modutils/obj/obj_sparc64.c
deleted file mode 100644
index f025667f8..000000000
--- a/mdk-stage1/insmod-modutils/obj/obj_sparc64.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/* Sparc64 specific support for Elf loading and relocation.
-   Copyright 1997 Linux International.
-
-   Contributed by Jakub Jelinek <jj@sunsite.mff.cuni.cz>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stddef.h>
-#include <module.h>
-#include <obj.h>
-#include <util.h>
-
-
-/*======================================================================*/
-
-struct obj_file *
-arch_new_file (void)
-{
-  return xmalloc(sizeof(struct obj_file));
-}
-
-struct obj_section *
-arch_new_section (void)
-{
-  return xmalloc(sizeof(struct obj_section));
-}
-
-struct obj_symbol *
-arch_new_symbol (void)
-{
-  return xmalloc(sizeof(struct obj_symbol));
-}
-
-#ifdef BROKEN_SPARC64_RELOCS
-
-#undef R_SPARC_PLT32
-#undef R_SPARC_HIPLT22
-#undef R_SPARC_LOPLT10
-#undef R_SPARC_PCPLT32
-#undef R_SPARC_PCPLT22
-#undef R_SPARC_PCPLT10
-#undef R_SPARC_10
-#undef R_SPARC_11
-#undef R_SPARC_64
-#undef R_SPARC_OLO10
-#undef R_SPARC_HH22
-#undef R_SPARC_HM10
-#undef R_SPARC_LM22
-#undef R_SPARC_PC_HH22
-#undef R_SPARC_PC_HM10
-#undef R_SPARC_PC_LM22
-#undef R_SPARC_WDISP16
-#undef R_SPARC_WDISP19
-#undef R_SPARC_GLOB_JMP
-#undef R_SPARC_7
-#undef R_SPARC_5
-#undef R_SPARC_6
-
-#define R_SPARC_10		24
-#define R_SPARC_11		25
-#define R_SPARC_64		26
-#define R_SPARC_OLO10		27
-#define R_SPARC_HH22		28
-#define R_SPARC_HM10		29
-#define R_SPARC_LM22		30
-#define R_SPARC_PC_HH22		31
-#define R_SPARC_PC_HM10		32
-#define R_SPARC_PC_LM22		33
-#define R_SPARC_WDISP16		34
-#define R_SPARC_WDISP19		35
-#define R_SPARC_GLOB_JMP	36
-#define R_SPARC_7		37
-#define R_SPARC_5		38
-#define R_SPARC_6		39
-
-#else
-
-#ifndef R_SPARC_64
-
-#define R_SPARC_64		32
-#define R_SPARC_OLO10		33
-#define R_SPARC_HH22		34
-#define R_SPARC_HM10		35
-#define R_SPARC_LM22		36
-#define R_SPARC_PC_HH22		37
-#define R_SPARC_PC_HM10		38
-#define R_SPARC_PC_LM22		39
-
-#endif
-
-#endif
-
-int
-arch_load_proc_section(struct obj_section *sec, int fp)
-{
-    /* Assume it's just a debugging section that we can safely
-       ignore ...  */
-    sec->contents = NULL;
-
-    return 0;
-}
-
-#define ELF64_R_TYPE_ID(info)	((info) & 0xff)
-#define ELF64_R_TYPE_DATA(info) ((info) >> 8)
-
-enum obj_reloc
-arch_apply_relocation (struct obj_file *ef,
-		       struct obj_section *targsec,
-		       struct obj_section *symsec,
-		       struct obj_symbol *sym,
-		       Elf64_Rela *rel,
-		       Elf64_Addr v)
-{
-  unsigned int *loc = (unsigned int *)(targsec->contents + rel->r_offset);
-  unsigned int dot = targsec->header.sh_addr + rel->r_offset;
-
-  enum obj_reloc ret = obj_reloc_ok;
-
-  switch (ELF64_R_TYPE_ID(rel->r_info))
-    {
-    case R_SPARC_NONE:
-      break;
-
-    case R_SPARC_64:
-    case R_SPARC_UA64:
-      if (! ((long) loc & 3)) {
-	/* Common in .eh_frame */
-	((unsigned int *) loc) [0] = v >> 32;
-	((unsigned int *) loc) [1] = v;
-	break;
-      }
-      ((unsigned char *) loc) [0] = v >> 56;
-      ((unsigned char *) loc) [1] = v >> 48;
-      ((unsigned char *) loc) [2] = v >> 40;
-      ((unsigned char *) loc) [3] = v >> 32;
-      ((unsigned char *) loc) [4] = v >> 24;
-      ((unsigned char *) loc) [5] = v >> 16;
-      ((unsigned char *) loc) [6] = v >> 8;
-      ((unsigned char *) loc) [7] = v;
-      break;
-    case R_SPARC_32:
-    case R_SPARC_UA32:
-      if (! ((long) loc & 3)) {
-	*loc = v;
-	break;
-      }
-      ((unsigned char *) loc) [0] = v >> 24;
-      ((unsigned char *) loc) [1] = v >> 16;
-      ((unsigned char *) loc) [2] = v >> 8;
-      ((unsigned char *) loc) [3] = v;
-      break;
-    case R_SPARC_16:
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xffff) | (v & 0xffff);
-      break;
-    case R_SPARC_8:
-      if (v > 0xff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xff) | (v & 0xff);
-      break;
-
-    case R_SPARC_DISP32:
-      v -= dot;
-      *loc = v;
-      break;
-    case R_SPARC_DISP16:
-      v -= dot;
-      if (v > 0xffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xffff) | (v & 0xffff);
-      break;
-    case R_SPARC_DISP8:
-      v -= dot;
-      if (v > 0xff)
-        ret = obj_reloc_overflow;
-      *loc = (*loc & ~0xff) | (v & 0xff);
-      break;
-    case R_SPARC_WDISP30:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x3fffffff) | ((v >> 2) & 0x3fffffff);
-      break;
-
-    /* MEDLOW code model relocs */
-    case R_SPARC_LO10:
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_HI22:
-      *loc = (*loc & ~0x3fffff) | (v >> 10);
-      break;
-    case R_SPARC_OLO10:
-      *loc = (*loc & ~0x1fff) | (((v & 0x3ff) + ELF64_R_TYPE_DATA (rel->r_info)) & 0x1fff);
-      break;
-
-    /* MEDMID code model relocs */
-    case R_SPARC_H44:
-      *loc = (*loc & ~0x3fffff) | (v >> 22);
-      break;
-    case R_SPARC_M44:
-      *loc = (*loc & ~0x3ff) | ((v >> 12) & 0x3ff);
-      break;
-    case R_SPARC_L44:
-      *loc = (*loc & ~0xfff) | (v & 0xfff);
-      break;
-
-    /* MEDANY code model relocs */
-    case R_SPARC_HH22:
-      *loc = (*loc & ~0x3fffff) | (v >> 42);
-      break;
-    case R_SPARC_HM10:
-      *loc = (*loc & ~0x3ff) | ((v >> 32) & 0x3ff);
-      break;
-    case R_SPARC_LM22:
-      *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
-      break;
-
-    case R_SPARC_WDISP22:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x3fffff) | ((v >> 2) & 0x3fffff);
-      break;
-    case R_SPARC_22:
-      if (v > 0x3fffff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3fffff) | (v & 0x3fffff);
-      break;
-    case R_SPARC_13:
-      if (v > 0x1fff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x1fff) | (v & 0x1fff);
-      break;
-
-    case R_SPARC_PC10:
-      v -= dot;
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_PC22:
-      v -= dot;
-      *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
-      break;
-
-#ifdef R_SPARC_10
-    case R_SPARC_10:
-      if (v > 0x3ff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3ff) | (v & 0x3ff);
-      break;
-    case R_SPARC_11:
-      if (v > 0x7ff)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x7ff) | (v & 0x7ff);
-      break;
-
-#ifdef R_SPARC_64
-    case R_SPARC_PC_HH22:
-      v -= dot;
-      *loc = (*loc & ~0x3fffff) | (v >> 42);
-      break;
-    case R_SPARC_PC_HM10:
-      v -= dot;
-      *loc = (*loc & ~0x3ff) | ((v >> 32) & 0x3ff);
-      break;
-    case R_SPARC_PC_LM22:
-      v -= dot;
-      *loc = (*loc & ~0x3fffff) | ((v >> 10) & 0x3fffff);
-      break;
-#endif
-
-    case R_SPARC_WDISP16:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x303fff) | ((v << 4) & 0x300000) | ((v >> 2) & 0x3fff);
-      break;
-    case R_SPARC_WDISP19:
-      v -= dot;
-      if (v % 4)
-	ret = obj_reloc_dangerous;
-      *loc = (*loc & ~0x7ffff) | ((v >> 2) & 0x7ffff);
-      break;
-    case R_SPARC_7:
-      if (v > 0x7f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x7f) | (v & 0x7f);
-      break;
-    case R_SPARC_5:
-      if (v > 0x1f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x1f) | (v & 0x1f);
-      break;
-    case R_SPARC_6:
-      if (v > 0x3f)
-	ret = obj_reloc_overflow;
-      *loc = (*loc & ~0x3f) | (v & 0x3f);
-      break;
-#endif /* R_SPARC_10 */
-
-    default:
-      ret = obj_reloc_unhandled;
-      break;
-    }
-
-  return ret;
-}
-
-int
-arch_create_got (struct obj_file *ef)
-{
-  return 1;
-}
-
-int
-arch_init_module (struct obj_file *f, struct module *mod)
-{
-  return 1;
-}
-
-int
-arch_finalize_section_address(struct obj_file *f, Elf64_Addr base)
-{
-  int  i, n = f->header.e_shnum;
-
-  f->baseaddr = base;
-  for (i = 0; i < n; ++i)
-    f->sections[i]->header.sh_addr += base;
-  return 1;
-}
-
-int
-arch_archdata (struct obj_file *fin, struct obj_section *sec)
-{
-  return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/util/Makefile b/mdk-stage1/insmod-modutils/util/Makefile
deleted file mode 100644
index dd8107435..000000000
--- a/mdk-stage1/insmod-modutils/util/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
- #******************************************************************************
- #
- #    insmod from modutils (generic)
- #
- # $Id$
- #
- # Copyright 1996, 1997 Linux International.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-all: libutil.a libutil-STANDALONE.a
-
-clean:
-	rm -f *.o *.a
-
-
-INCS = -I./../include
-
-DEFS = -Wno-error -D_GNU_SOURCE -DELF_MACHINE_H='"elf_$(ARCH).h"' -DARCH_$(ARCH) -DHAVE_WORDEXP=1 -DHAVE_GLOB=1 -DCONFIG_ROOT_CHECK_OFF=0
-
-
-OBJS = xmalloc.o xrealloc.o xstrcat.o xstrdup.o xsystem.o xftw.o \
-        modstat.o meta_expand.o config.o snap_shot.o arch64.o gzfiles.o sys_nim.o sys_oim.o
-
-libutil.a: $(OBJS) logger.o
-	ar cru $@ $^
-	ranlib $@
-
-libutil-STANDALONE.a: $(OBJS) logger-standalone.o
-	ar cru $@ $^
-	ranlib $@
-
-logger-standalone.o: logger.c
-	$(DIET) gcc $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -o $@ -D_STANDALONE_ -c logger.c
-
-%.o: %.c
-	$(DIET) gcc $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -c $<
diff --git a/mdk-stage1/insmod-modutils/util/alias.h b/mdk-stage1/insmod-modutils/util/alias.h
deleted file mode 100644
index 7d0c08938..000000000
--- a/mdk-stage1/insmod-modutils/util/alias.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * This file is split out from config.c for easier editing
- */
-
-/*
- * tbpath and tbtype are used to build the complete set of paths for finding
- * modules, but only when we search for individual directories, they are not
- * used for [boot] and [toplevel] searches.
- */
-static char *tbpath[] =
-{
-	"/lib/modules",
-	NULL			/* marks the end of the list! */
-};
-
-char *tbtype[] =
-{
-	"kernel",		/* as of 2.3.14 this must be first */
-	"fs",
-	"net",
-	"scsi",
-	"block",
-	"cdrom",
-	"ipv4",
-	"ipv6",
-	"sound",
-	"fc4",
-	"video",
-	"misc",
-	"pcmcia",
-	"atm",
-	"usb",
-	"ide",
-	"ieee1394",
-	"mtd",
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined aliases.
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *aliaslist[] =
-{
-	"binfmt-0000 off",
-	"binfmt-204 binfmt_aout",
-	"binfmt-263 binfmt_aout",
-	"binfmt-264 binfmt_aout",
-	"binfmt-267 binfmt_aout",
-	"binfmt-387 binfmt_aout",
-	"binfmt-332 iBCS",
-	"binfmt--310 binfmt_java",
-
-	"block-major-1 rd",
-	"block-major-2 floppy",
-	"block-major-3 ide-probe-mod",
-	"block-major-7 loop",
-	"block-major-8 sd_mod",
-	"block-major-9 md", /* For modular RAID */
-	"block-major-11 sr_mod",
-	"block-major-13 xd",
-	"block-major-15 cdu31a",
-	"block-major-16 gscd",
-	"block-major-17 optcd",
-	"block-major-18 sjcd",
-	"block-major-20 mcdx",
-	"block-major-22 ide-probe-mod",
-	"block-major-23 mcd",
-	"block-major-24 sonycd535",
-	"block-major-25 sbpcd",
-	"block-major-26 sbpcd",
-	"block-major-27 sbpcd",
-	"block-major-29 aztcd",
-	"block-major-32 cm206",
-	"block-major-33 ide-probe-mod",
-	"block-major-34 ide-probe-mod",
-	"block-major-37 ide-tape",
-	"block-major-44 ftl",		/* from David Woodhouse <dwmw2@infradead.org> */
-	"block-major-46 pcd",
-	"block-major-47 pf",
-	"block-major-56 ide-probe-mod",
-	"block-major-57 ide-probe-mod",
-	"block-major-58 lvm-mod",
-	"block-major-88 ide-probe-mod",
-	"block-major-89 ide-probe-mod",
-	"block-major-90 ide-probe-mod",
-	"block-major-91 ide-probe-mod",
-	"block-major-93 nftl",		/* from David Woodhouse <dwmw2@infradead.org> */
-	"block-major-97 pg",
-
-#if !defined(__s390__) && !defined(__s390x__)
-	"char-major-4 serial",
-#else
- 	"char-major-4 off",
-#endif
-	"char-major-5 serial",
-	"char-major-6 lp",
-	"char-major-9 st",
-	"char-major-10 off",		/* was: mouse, was: misc */
-	"char-major-10-0 busmouse",	/* /dev/logibm Logitech bus mouse */
-	"char-major-10-1 off",		/* /dev/psaux PS/2-style mouse port */
-	"char-major-10-2 msbusmouse",	/* /dev/inportbm Microsoft Inport bus mouse */
-	"char-major-10-3 atixlmouse",	/* /dev/atibm ATI XL bus mouse */
-					/* /dev/jbm J-mouse */
-					/* /dev/amigamouse Amiga mouse (68k/Amiga) */
-					/* /dev/atarimouse Atari mouse */
-					/* /dev/sunmouse Sun mouse */
-					/* /dev/beep Fancy beep device */
-					/* /dev/modreq Kernel module load request */
-	"char-major-10-130 wdt",	/* /dev/watchdog Watchdog timer port */
-	"char-major-10-131 wdt",	/* /dev/temperature Machine internal temperature */
-					/* /dev/hwtrap Hardware fault trap */
-					/* /dev/exttrp External device trap */
-	"char-major-10-135 rtc",	/* /dev/rtc Real time clock */
-	"char-major-10-139 openprom",	/* /dev/openprom Linux/Sparc interface */
-	"char-major-10-144 nvram",	/* from Tigran Aivazian <tigran@sco.COM> */
-	"char-major-10-157 applicom",	/* from David Woodhouse <dwmw2@infradead.org> */
-	"char-major-10-175 agpgart",    /* /dev/agpgart GART AGP mapping access */
-	"char-major-10-184 microcode",	/* Tigran Aivazian <tigran@veritas.com> */
-
-	"char-major-13 input",
-	"char-major-13-32 mousedev",
-	"char-major-14 soundcore",
-	"char-major-19 cyclades",
-	"char-major-20 cyclades",
-	"char-major-21 sg",
-	"char-major-22 pcxx", /* ?? */
-	"char-major-23 pcxx", /* ?? */
-	"char-major-27 ftape",
-	"char-major-34 scc",
-	"char-major-35 tclmidi",
-	"char-major-36 netlink",
-	"char-major-37 ide-tape",
-	"char-major-48 riscom8",
-	"char-major-49 riscom8",
-	"char-major-57 esp",
-	"char-major-58 esp",
-	"char-major-63 kdebug",
-	"char-major-90 mtdchar",	/* from David Woodhouse <dwmw2@infradead.org> */
-	"char-major-96 pt",
-	"char-major-99 ppdev",
-	"char-major-107 3dfx", /* from Tigran Aivazian <tigran@sco.COM> */
-	"char-major-108 ppp_generic",
-	"char-major-109 lvm-mod",
-	"char-major-161 ircomm-tty",
-	"char-major-171 raw1394",
-	"char-major-195 NVdriver",
-	"char-major-200 vxspec",
-
-	"dos msdos",
-	"dummy0 dummy",
-	"dummy1 dummy",
-	"eth0 off",
-	"iso9660 isofs",
-	"md-personality-1 linear",
-	"md-personality-2 raid0",
-        "md-personality-3 raid1",
-        "md-personality-4 raid5",
-	"md-personality-7 multipath",
-
-	"net-pf-1 unix",	/* PF_UNIX	1  Unix domain sockets */
-	"net-pf-2 ipv4",	/* PF_INET	2  Internet IP Protocol */
-	"net-pf-3 off",		/* PF_AX25	3  Amateur Radio AX.25 */
-	"net-pf-4 ipx",		/* PF_IPX	4  Novell IPX */
-	"net-pf-5 appletalk",	/* PF_APPLETALK	5  Appletalk DDP */
-	"net-pf-6 off",		/* PF_NETROM	6  Amateur radio NetROM */
-				/* PF_BRIDGE	7  Multiprotocol bridge */
-				/* PF_AAL5	8  Reserved for Werner's ATM */
-				/* PF_X25	9  Reserved for X.25 project */
-	"net-pf-10 off",	/* PF_INET6	10 IP version 6 */
-
-	/* next two from <dairiki@matthews.dairiki.org>  Thanks! */
-	"net-pf-17 af_packet",
-	"net-pf-19 off",	/* acorn econet */
-
-	"netalias-2 ip_alias",
-
-	/* To be able to attach some dongles */
-	"irlan0 irlan",
-	"irda-dongle-0 tekram",
-	"irda-dongle-1 esi",
-	"irda-dongle-2 actisys",
-	"irda-dongle-3 actisys",
-	"irda-dongle-4 girbil",
-	"irda-dongle-5 litelink",
-	"irda-dongle-6 airport",
-	"irda-dongle-7 old_belkin",
-
-	"plip0 plip",
-	"plip1 plip",
-	"tunl0 ipip",
-	"cipcb0 cipcb",
-	"cipcb1 cipcb",
-	"cipcb2 cipcb",
-	"cipcb3 cipcb",
-#if	defined(__s390__) || defined(__s390x__)
-	"ctc0 ctc",
-	"ctc1 ctc",
-	"ctc2 ctc",
-	"iucv0 netiucv",
-	"iucv1 netiucv",
-#endif
-	"ppp0 ppp",
-	"ppp1 ppp",
-	"slip0 slip",
-	"slip1 slip",
-	"tty-ldisc-1 slip",
-	"tty-ldisc-3 ppp_async",
-	"tty-ldisc-11 irtty", /* IrDA over a normal serial port, or a serial port compatible IrDA port */
-	"tty-ldisc-14 ppp_synctty",
-	"ppp-compress-18 ppp_mppe",
-	"ppp-compress-21 bsd_comp",
-	"ppp-compress-24 ppp_deflate",
-	"ppp-compress-26 ppp_deflate",
-	"ppp ppp_async", /* for 2.4 */
-
-#ifndef __sparc__
-	"parport_lowlevel parport_pc",
-#else
-        "parport_lowlevel parport_ax",
-#endif
-
-	"usbdevfs usbcore",
-
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined options.
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *optlist[] =
-{
-	"dummy0 -o dummy0",
-	"dummy1 -o dummy1",
-	"sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330",
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "above"s,
- * used for pull-in of additional modules
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *above[] =
-{
-	"hid keybdev mousedev",
-	"usbmouse hid",
-	"wacom evdev",
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "below"s,
- * used for push-in of additional modules
- * Each entry can be overridden by an entry in /etc/modules.conf
- */
-char *below[] =
-{
-	NULL			/* marks the end of the list! */
-};
-
-/*
- * This is the list of pre-defined "post-install"s,
- * used to execute commands after loading modules.
- * /etc/modules.conf can add entries but not remove them.
- */
-char *post_install[] =
-{
-	"binfmt_misc /bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc  > /dev/null 2>&1 || :",
-	NULL 
-};
-
-/*
- * This is the list of pre-defined "pre-remove"s,
- * used to execute commands before unloading modules.
- * /etc/modules.conf can add entries but not remove them.
- */
-char *pre_remove[] =
-{
-	"binfmt_misc /bin/umount /proc/sys/fs/binfmt_misc > /dev/null 2>&1 || :",
-	NULL
-};
-
-/*
- * This is the list of pre-defined "prune"s,
- * used to exclude paths from scan of /lib/modules.
- * /etc/modules.conf can add entries but not remove them.
- */
-char *prune[] =
-{
-	"modules.dep",
-	"modules.description",
-	"modules.generic_string",
-	"modules.pcimap",
-	"modules.isapnpmap",
-	"modules.usbmap",
-	"modules.parportmap",
-	"modules.ieee1394map",
-	"modules.pnpbiosmap",
-	"System.map",
-	".config",
-	"build",		/* symlink to source tree */
-	"vmlinux",
-	"vmlinuz",
-	"bzImage",
-	"zImage",
-	".rhkmvtag",		/* wish RedHat had told me before they did this */
-	NULL			/* marks the end of the list! */
-};
diff --git a/mdk-stage1/insmod-modutils/util/arch64.c b/mdk-stage1/insmod-modutils/util/arch64.c
deleted file mode 100644
index 90886d16b..000000000
--- a/mdk-stage1/insmod-modutils/util/arch64.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Misc utility functions.
-   Copyright 1996, 1997 Linux International.
-   Written by Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <string.h>
-#include <sys/utsname.h>
-#include "util.h"
-
-/*======================================================================*/
-
-/* Indicate if the current machine uses 64 bit architecture */
-int arch64(void)
-{
-	struct utsname uts;
-	char *uname_m;
-	if (uname(&uts))
-		return(0);
-	if ((uname_m = getenv("UNAME_MACHINE"))) {
-		int l = strlen(uname_m);
-		if (l >= sizeof(uts.machine))
-			l = sizeof(uts.machine)-1;
-		memcpy(uts.machine, uname_m, l);
-		uts.machine[l] = '\0';
-	}
-	return(strstr(uts.machine, "64") != NULL);
-}
diff --git a/mdk-stage1/insmod-modutils/util/config.c b/mdk-stage1/insmod-modutils/util/config.c
deleted file mode 100644
index 7568d955f..000000000
--- a/mdk-stage1/insmod-modutils/util/config.c
+++ /dev/null
@@ -1,1614 +0,0 @@
-/*
- * Handle the configuration, including /etc/modules.conf
- *
- * Copyright 1994, 1995, 1996, 1997:
- *	Jacques Gelinas <jack@solucorp.qc.ca>
- *	Bj�rn Ekwall <bj0rn@blox.se> February 1999
- *	Keith Owens <kaos@ocs.com.au> October 1999
- *
- * "kernelversion" idea from the Debian release via:
- *      Wichert Akkerman <wakkerma@cs.leidenuniv.nl>
- *
- * Bj�rn, inspired by Richard Henderson <rth@twiddle.net>, cleaned up
- * the wildcard handling and started using ftw in March 1999
- * Cleanup of hardcoded arrays: Bj�rn Ekwall <bj0rn@blox.se> March 1999
- * Many additional keywords: Bj�rn Ekwall <bj0rn@blox.se> (C) March 1999
- * Standardize on /etc/modules.conf Keith Owens <kaos@ocs.com.au> October 1999
- *
- * Alpha typecast:Michal Jaegermann <michal@ellpspace.math.ualberta.ca>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * Specification: /etc/modules.conf / format
- *	Modules may be located at different places in the filesystem.
- *
- *	The file /etc/modules.conf contains different definitions to
- *	control the manipulation of modules.
- *
- *	Standard Unix style comments and continuation line are supported.
- *	Comments begin with a # and continue until the end of the line.
- *	A line continues on the next one if the last non-white character
- *	is a \.
- */
-/* #Specification: /etc/modules.conf / format / official name */
-
-#include <stdio.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <limits.h>
-#include <sys/param.h>
-#include <errno.h>
-
-#include "util.h"
-#include "config.h"
-#include "alias.h"
-
-int flag_autoclean; /* set/used by modprobe and insmod */
-
-struct utsname uts_info;
-
-struct PATH_TYPE *modpath;
-int nmodpath = 0;
-static int maxpath = 0;
-
-struct EXEC_TYPE *execs;
-int nexecs = 0;
-static int maxexecs = 0;
-
-OPT_LIST *opt_list;
-static int n_opt_list;
-
-OPT_LIST *abovelist;
-static int n_abovelist;
-
-OPT_LIST *belowlist;
-static int n_belowlist;
-
-OPT_LIST *prunelist;
-static int n_prunelist;
-
-OPT_LIST *probe_list;
-static int n_probe_list;
-
-OPT_LIST *probeall_list;
-static int n_probeall_list;
-
-OPT_LIST *aliases;
-static int n_aliases;
-
-char *persistdir = "/var/lib/modules/persist";
-
-const char symprefix[] = SYMPREFIX;
-
-char *insmod_opt = NULL;
-char *config_file = NULL;	/* Which file was actually used */
-time_t config_mtime;
-int root_check_off = CONFIG_ROOT_CHECK_OFF;	/* Default is modules must be owned by root */
-static char *config_version;	/* Hack for config_add */
-int quick = 0;			/* Option -A */
-
-/* The initialization order must match the gen_file_enum order in config.h */
-struct gen_files gen_file[] = {
-	{"generic_string", NULL, 0},
-	{"pcimap", NULL, 0},
-	{"isapnpmap", NULL, 0},
-	{"usbmap", NULL, 0},
-	{"parportmap", NULL, 0},
-	{"ieee1394map", NULL, 0},
-	{"pnpbiosmap", NULL, 0},
-	{"dep", NULL, 0},
-};
-
-const int gen_file_count = sizeof(gen_file)/sizeof(gen_file[0]);
-
-int flag_verbose;
-
-unsigned long safemode;
-
-void verbose(const char *ctl,...)
-{
-	if (flag_verbose) {
-		va_list list;
-		va_start(list, ctl);
-		vprintf(ctl, list);
-		va_end(list); 
-		fflush(stdout);
-	}
-}
-
-
-/*
- *	Check to see if the existing modules.xxx files need updating,
- *	based on the timestamps of the modules and the config file.
- */
-static int check_update (const char *file, const struct stat *sb)
-{
-	int len = strlen(file);
-	int i;
-
-	if (!S_ISREG(sb->st_mode))
-		return 0;
-	for (i = 0; i < gen_file_count; ++i) {
-		if (sb->st_mtime > gen_file[i].mtime)
-			break;
-	}
-	if (i == gen_file_count)
-		return 0;	/* All generated files are up to date */
-
-	if (len > 2 && !strcmp(file + len - 2, ".o"))
-		return 1;
-	else if (len > 4 && !strcmp(file + len - 4, ".mod"))
-		return 1;
-#ifdef CONFIG_USE_ZLIB
-	else if (len > 5 && !strcmp(file + len - 5, ".o.gz"))
-		return 1;
-#endif
-	return 0;
-}
-
-static int need_update (const char *force_ver, const char *base_dir)
-{
-	struct stat tmp;
-	char dep[PATH_MAX];
-	int i;
-	uname (&uts_info);
-	if (!force_ver)
-		force_ver = uts_info.release;
-
-	if (strlen (force_ver) > 50)
-		/* That's just silly. */
-		return 1;
-
-	for (i = 0; i < gen_file_count; ++i) {
-		if (stat(gen_file[i].name, &tmp))
-			return 1;	/* No dependency file yet, so we need to build it. */
-		gen_file[i].mtime = tmp.st_mtime;
-	}
-
-	if (stat ("/etc/modules.conf", &tmp) &&
-	    stat ("/etc/conf.modules", &tmp))
-		return 1;
-
-	for (i = 0; i < gen_file_count; ++i) {
-		if (tmp.st_mtime > gen_file[i].mtime)
-			return 1;	/* Config file is newer. */
-	}
-
-	snprintf (dep, sizeof(dep), "%s/lib/modules/%s", base_dir, force_ver);
-	return xftw (dep, check_update);
-}
-
-
-/*
- *	Strip white char at the end of a string.
- *	Return the address of the last non white char + 1 (point on the '\0').
- */
-static char *strip_end(char *str)
-{
-	int len = strlen(str);
-
-	for (str += len - 1; len > 0 && (isspace(*str)); --len, --str)
-		*str = '\0';
-	return str + 1;
-}
-
-/*
- *	Read a line of a configuration file and process continuation lines.
- *	Return buf, or NULL if EOF.
- *	Blank at the end of line are always stripped.
- *	Everything on a line following comchar is a comment.
- *
- *	Continuation character is \
- *	Comment character is #
- */
-char *fgets_strip(char *buf, int sizebuf, FILE * fin, int *lineno)
-{
-	int nocomment = 1; /* No comments found ? */
-	int contline = 0;
-	char *start = buf;
-	char *ret = NULL;
-	char comchar = '#';
-	char contchar = '\\';
-
-	*buf = '\0';
-
-	while (fgets(buf, sizebuf, fin) != NULL) {
-		char *end = strip_end(buf);
-		char *pt = strchr(buf, comchar);
-
-		if (pt != NULL) {
-			nocomment = 0;
-			*pt = '\0';
-			end = strip_end(buf);
-		}
-
-		if (lineno != NULL)
-			(*lineno)++;
-		ret = start;
-		if (contline) {
-			char *pt = buf;
-
-			while (isspace(*pt))
-				pt++;
-			if (pt > buf + 1) {
-				strcpy(buf + 1, pt);	/* safe, backward copy */
-				buf[0] = ' ';
-				end -= (int) (pt - buf) - 1;
-			} else if (pt == buf + 1) {
-				buf[0] = ' ';
-			}
-		}
-		if (end > buf && *(end - 1) == contchar) {
-			if (end == buf + 1 || *(end - 2) != contchar) {
-				/* Continuation */
-				contline = 1;
-				end--;
-				*end = '\0';
-				buf = end;
-			} else {
-				*(end - 1) = '\0';
-				break;
-			}
-		} else {
-			break;
-		}
-	}
-
-	return ret;
-}
-
-static char *next_word(char *pt)
-{
-	char *match;
-	char *pt2;
-
-	/* find end of word */
-	for (pt2 = pt; *pt2 && !(isspace(*pt2)); ++pt2) {
-		if ((match = strchr("\"'`", *pt2)) != NULL) {
-			for (++pt2; *pt2 && *pt2 != *match; ++pt2) {
-				if (*pt2 == '\\' && *(pt2 + 1) == *match)
-					++pt2;
-			}
-		}
-	}
-
-	/* skip leading whitespace before next word */
-	if (*pt2) {
-		*pt2++ = '\0'; /* terminate last word */
-		while (*pt2 && isspace(*pt2))
-			++pt2;
-	}
-	return pt2;
-}
-
-static GLOB_LIST *addlist(GLOB_LIST *orig, GLOB_LIST *add)
-{
-	if (!orig)
-		return add;
-	/* else */
-	orig->pathv = (char **)xrealloc(orig->pathv,
-					(orig->pathc + add->pathc + 1) *
-					sizeof(char *));
-	memcpy(orig->pathv + orig->pathc, add->pathv,
-	       add->pathc * sizeof(char *));
-	orig->pathc += add->pathc;
-	orig->pathv[orig->pathc] = NULL;
-	/*
-	free(add->pathv);
-	free(add);
-	*/
-	return orig;
-}
-
-static void decode_list(int *n, OPT_LIST **list, char *arg, int adding,
-			char *version, int opts)
-{
-	GLOB_LIST *pg;
-	GLOB_LIST *prevlist = NULL;
-	int i, autoclean = 1;
-	int where = *n;
-	char *arg2 = next_word(arg);
-
-	if (opts && !strcmp (arg, "-k")) {
-		if (!*arg2)
-			error("Missing module argument after -k\n");
-		arg = arg2;
-		arg2 = next_word(arg);
-		autoclean = 0;
-	}
-
-	for (i = 0; i < *n; ++i) {
-		if (strcmp((*list)[i].name, arg) == 0) {
-			if (adding)
-				prevlist = (*list)[i].opts;
-			else
-				free((*list)[i].opts);
-			(*list)[i].opts = NULL;
-			where = i;
-			break;
-		}
-	}
-	if (where == *n) {
-		(*list) = (OPT_LIST *)xrealloc((*list),
-			  (*n + 2) * sizeof(OPT_LIST));
-		(*list)[*n].name = xstrdup(arg);
-		(*list)[*n].autoclean = autoclean;
-		*n += 1;
-		memset(&(*list)[*n], 0, sizeof(OPT_LIST));
-	} else if (!autoclean)
-		(*list)[where].autoclean = 0;
-	pg = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
-	meta_expand(arg2, pg, NULL, version, ME_ALL);
-	(*list)[where].opts = addlist(prevlist, pg);
-}
-
-static void decode_exec(char *arg, int type)
-{
-	char *arg2;
-
-	execs[nexecs].when = type;
-	arg2 = next_word(arg);
-	execs[nexecs].module = xstrdup(arg);
-	execs[nexecs].cmd = xstrdup(arg2);
-	if (++nexecs >= maxexecs) {
-		maxexecs += 10;
-		execs = (struct EXEC_TYPE *)xrealloc(execs,
-			maxexecs * sizeof(struct EXEC_TYPE));
-	}
-}
-
-static int build_list(char **in, OPT_LIST **out, char *version, int opts)
-{
-	GLOB_LIST *pg;
-	int i;
-
-	for (i = 0; in[i]; ++i) {
-		char *p = xstrdup(in[i]);
-		char *pt = next_word(p);
-		char *pn = p;
-
-		*out = (OPT_LIST *)xrealloc(*out, (i + 2) * sizeof(OPT_LIST));
-		(*out)[i].autoclean = 1;
-		if (opts && !strcmp (p, "-k")) {
-		    pn = pt;
-		    pt = next_word(pn);
-		    (*out)[i].autoclean = 0;
-		}
-		pg = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
-		meta_expand(pt, pg, NULL, version, ME_ALL);
-		(*out)[i].name = xstrdup(pn);
-		(*out)[i].opts = pg;
-		free(p);
-	}
-	memset(&(*out)[i], 0, sizeof(OPT_LIST));
-
-	return i;
-}
-
-/* Environment variables can override defaults, testing only */
-static void gen_file_env(struct gen_files *gf)
-{
-	if (!safemode) {
-		char *e = xmalloc(strlen(gf->base)+5), *p1 = gf->base, *p2 = e;
-		while ((*p2++ = toupper(*p1++))) ;
-		strcpy(p2-1, "PATH");	/* safe, xmalloc */
-		if ((p2 = getenv(e)) != NULL) {
-			free(gf->name);
-			gf->name = xstrdup(p2);
-		}
-		free(e);
-	}
-}
-
-/* Read a config option for a generated filename */
-static int gen_file_conf(struct gen_files *gf, int assgn, const char *parm, const char *arg)
-{
-
-	int l = strlen(gf->base);
-	if (assgn &&
-	    strncmp(parm, gf->base, l) == 0 &&
-	    strcmp(parm+l, "file") == 0 &&
-	    !gf->name) {
-		gf->name = xstrdup(arg);
-		return(0);
-	}
-	return(1);
-}
-
-/* Check we have a name for a generated file */
-static int gen_file_check(struct gen_files *gf, GLOB_LIST *g,
-			  char *base_dir, char *version)
-{
-	char tmp[PATH_MAX];
-	int ret = 0;
-	if (!gf->name) {
-		/*
-		 * Specification: config file / no xxxfile parameter
-		 * The default value for generated filename xxx is:
-		 *
-		 * xxxfile=/lib/modules/`uname -r`/modules.xxx
-		 *
-		 * If the config file exists but lacks an xxxfile
-		 * specification, the default value is used since
-		 * the system can't work without one.
-		 */
-		snprintf(tmp, sizeof(tmp), "%s/lib/modules/%s/modules.%s",
-			base_dir, version, gf->base);
-		gf->name = xstrdup(tmp);
-	} else { /* xxxfile defined in modules.conf */
-		/*
-		 * If we have a xxxfile definition in the configuration file
-		 * we must resolve any shell meta-chars in its value.
-		 */
-		if (meta_expand(gf->name, g, base_dir, version, ME_ALL))
-			ret = -1;
-		else if (!g->pathv || g->pathv[0] == NULL)
-			ret = -1;
-		else {
-			free(gf->name);
-			gf->name = xstrdup(g->pathv[0]);
-		}
-	}
-	return(ret);
-}
-
-/*
- *	Read the configuration file.
- *	If parameter "all" == 0 then ignore everything except path info
- *	Return -1 if any error.
- *	Error messages generated.
- */
-static int do_read(int all, char *force_ver, char *base_dir, char *conf_file, int depth)
-{
-	#define MAX_LEVEL 20
-	FILE *fin;
-	GLOB_LIST g;
-	int i;
-	int assgn;
-	int drop_default_paths = 1;
-	int lineno = 0;
-	int ret = 0;
-	int state[MAX_LEVEL + 1]; /* nested "if" */
-	int level = 0;
-	char buf[3000];
-	char tmpline[PATH_MAX];
-	char **pathp;
-	char *envpath;
-	char *version;
-	char *type;
-	char **glb;
-	char old_name[] = "/etc/conf.modules";
-	int conf_file_specified = 0;
-
-	/*
-	 * The configuration file is optional.
-	 * No error is printed if it is missing.
-	 * If it is missing the following content is assumed.
-	 *
-	 * path[boot]=/lib/modules/boot
-	 *
-	 * path[toplevel]=/lib/modules/`uname -r`
-	 *
-	 * path[toplevel]=/lib/modules/`kernelversion`
-	 *   (where kernelversion gives the major kernel version: "2.0", "2.2"...)
-	 *
-	 * path[toplevel]=/lib/modules/default
-	 *
-	 * path[kernel]=/lib/modules/kernel
-	 * path[fs]=/lib/modules/fs
-	 * path[net]=/lib/modules/net
-	 * path[scsi]=/lib/modules/scsi
-	 * path[block]=/lib/modules/block
-	 * path[cdrom]=/lib/modules/cdrom
-	 * path[ipv4]=/lib/modules/ipv4
-	 * path[ipv6]=/lib/modules/ipv6
-	 * path[sound]=/lib/modules/sound
-	 * path[fc4]=/lib/modules/fc4
-	 * path[video]=/lib/modules/video
-	 * path[misc]=/lib/modules/misc
-	 * path[pcmcia]=/lib/modules/pcmcia
-	 * path[atm]=/lib/modules/atm
-	 * path[usb]=/lib/modules/usb
-	 * path[ide]=/lib/modules/ide
-	 * path[ieee1394]=/lib/modules/ieee1394
-	 * path[mtd]=/lib/modules/mtd
-	 *
-	 * The idea is that modprobe will look first if the
-	 * modules are compiled for the current release of the kernel.
-	 * If not found, it will look for modules that fit for the
-	 * general kernelversion (2.0, 2.2 and so on).
-	 * If still not found, it will look into the default release.
-	 * And if still not found, it will look in the other directories.
-	 *
-	 * The strategy should be like this:
-	 * When you install a new linux kernel, the modules should go
-	 * into a directory related to the release (version) of the kernel.
-	 * Then you can do a symlink "default" to this directory.
-	 *
-	 * Each time you compile a new kernel, the make modules_install
-	 * will create a new directory, but it won't change thee default.
-	 *
-	 * When you get a module unrelated to the kernel distribution
-	 * you can place it in one of the last three directory types.
-	 *
-	 * This is the default strategy. Of course you can overide
-	 * this in /etc/modules.conf.
-	 *
-	 * 2.3.15 added a new file tree walk algorithm which made it possible to
-	 * point at a top level directory and get the same behaviour as earlier
-	 * versions of modutils.  2.3.16 takes this one stage further, it
-	 * removes all the individual directory names from most of the scans,
-	 * only pointing at the top level directory.  The only exception is the
-	 * last ditch scan, scanning all of /lib/modules would be a bad idea(TM)
-	 * so the last ditch scan still runs individual directory names under
-	 * /lib/modules.
-	 *
-	 * Additional syntax:
-	 *
-	 * [add] above module module1 ...
-	 *	Specify additional modules to pull in on top of a module
-	 *
-	 * [add] below module module1 ...
-	 *	Specify additional modules needed to be able to load a module
-	 *
-	 * [add] prune filename ...
-	 *
-	 * [add] probe name module1 ...
-	 *	When "name" is requested, modprobe tries to install each
-	 *	module in the list until it succeeds.
-	 *
-	 * [add] probeall name module1 ...
-	 *	When "name" is requested, modprobe tries to install all
-	 *	modules in the list.
-	 *	If any module is installed, the command has succeeded.
-	 *
-	 * [add] options module option_list
-	 *
-	 * For all of the above, the optional "add" prefix is used to
-	 * add to a list instead of replacing the contents.
-	 *
-	 * include FILE_TO_INCLUDE
-	 *	This does what you expect. No limitation on include levels.
-	 *
-	 * persistdir=persist_directory
-	 *	Name the directory to save persistent data from modules.
-	 *
-	 * In the following WORD is a sequence if non-white characters.
-	 * If ' " or ` is found in the string, all characters up to the
-	 * matching ' " or ` will also be included, even whitespace.
-	 * Every WORD will then be expanded w.r.t. meta-characters.
-	 * If the expanded result gives more than one word, then only
-	 * the first word of the result will be used.
-	 *
-	 *
-	 * define CODE WORD
-	 *		Do a putenv("CODE=WORD")
-	 *
-	 * EXPRESSION below can be:
-	 *	WORD compare_op WORD
-	 *		where compare_op is one of == != < <= >= >
-	 *		The string values of the WORDs are compared
-	 * or
-	 *	-n WORD compare_op WORD
-	 *		where compare_op is one of == != < <= >= >
-	 *		The numeric values of the WORDs are compared
-	 * or
-	 *	WORD
-	 *		if the expansion of WORD fails, or if the
-	 *		expansion is "0" (zero), "false" or "" (empty)
-	 *		then the expansion has the value FALSE.
-	 *		Otherwise the expansion has the value TRUE
-	 * or
-	 *	-f FILENAME
-	 *		Test if the file FILENAME exists
-	 * or
-	 *	-k
-	 *		Test if "autoclean" (i.e. called from the kernel)
-	 * or
-	 *	! EXPRESSION
-	 *		A negated expression is also an expression
-	 *
-	 * if EXPRESSION
-	 *	any config line
-	 *	...
-	 * elseif EXPRESSION
-	 *	any config line
-	 *	...
-	 * else
-	 *	any config line
-	 *	...
-	 * endif
-	 *
-	 * The else and elseif keywords are optional.
-	 * "if"-statements nest up to 20 levels.
-	 */
-
-	state[0] = 1;
-
-	if (force_ver)
-		version = force_ver;
-	else
-		version = uts_info.release;
-
-	config_version = xstrdup(version);
-
-	/* Only read the default entries on the first file */
-	if (depth == 0) {
-		maxpath = 100;
-		modpath = (struct PATH_TYPE *)xmalloc(maxpath * sizeof(struct PATH_TYPE));
-		nmodpath = 0;
-
-		maxexecs = 10;
-		execs = (struct EXEC_TYPE *)xmalloc(maxexecs * sizeof(struct EXEC_TYPE));
-		nexecs = 0;
-
-		/*
-		 * Build predef options
-		 */
-		if (all && optlist[0])
-			n_opt_list = build_list(optlist, &opt_list, version, 1);
-
-		/*
-		 * Build predef above
-		 */
-		if (all && above[0])
-			n_abovelist = build_list(above, &abovelist, version, 0);
-
-		/*
-		 * Build predef below
-		 */
-		if (all && below[0])
-			n_belowlist = build_list(below, &belowlist, version, 0);
-
-		/*
-		 * Build predef prune list
-		 */
-		if (prune[0])
-			n_prunelist = build_list(prune, &prunelist, version, 0);
-
-		/*
-		 * Build predef aliases
-		 */
-		if (all && aliaslist[0])
-			n_aliases = build_list(aliaslist, &aliases, version, 0);
-
-		/*
-		 * Build predef postinstalls
-		 */
-		if (all && post_install[0])
-			for (i=0 ; post_install[i] ; i++ )
-				decode_exec(xstrdup(post_install[i]), EXEC_POST_INSTALL);
-		
-		/*
-		 * Build predef preremoves
-		 */
-		if (all && pre_remove[0])
-			for (i=0 ; pre_remove[i] ; i++ )
-				decode_exec(xstrdup(pre_remove[i]), EXEC_PRE_REMOVE);
-
-		/* Order and priority is now: (MODPATH + modules.conf) || (predefs + modules.conf) */
-		if ((envpath = getenv("MODPATH")) != NULL && !safemode) {
-			size_t len;
-			char *p;
-			char *path;
-
-			/* Make a copy so's we can mung it with strtok.  */
-			len = strlen(envpath) + 1;
-			p = alloca(len);
-			memcpy(p, envpath, len);
-			path = alloca(PATH_MAX);
-
-			for (p = strtok(p, ":"); p != NULL; p = strtok(NULL, ":")) {
-				len = snprintf(path, PATH_MAX, p, version);
-				modpath[nmodpath].path = xstrdup(path);
-				if ((type = strrchr(path, '/')) != NULL)
-					type += 1;
-				else
-					type = "misc";
-				modpath[nmodpath].type = xstrdup(type);
-				if (++nmodpath >= maxpath) {
-					maxpath += 100;
-					modpath = (struct PATH_TYPE *)xrealloc(modpath,
-						maxpath * sizeof(struct PATH_TYPE));
-				}
-
-			}
-		} else {
-			/*
-			 * Build the default "path[type]" configuration
-			 */
-			int n;
-			char *k;
-
-			/* The first entry in the path list */
-			modpath[nmodpath].type = xstrdup("boot");
-			snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/boot", base_dir);
-			modpath[nmodpath].path = xstrdup(tmpline);
-			++nmodpath;
-
-			/* The second entry in the path list, `uname -r` */
-			modpath[nmodpath].type = xstrdup("toplevel");
-			snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/%s", base_dir, version);
-			modpath[nmodpath].path = xstrdup(tmpline);
-			++nmodpath;
-
-			/* The third entry in the path list, `kernelversion` */
-			modpath[nmodpath].type = xstrdup("toplevel");
-			for (n = 0, k = version; *k; ++k) {
-				if (*k == '.' && ++n == 2)
-					break;
-			}
-			snprintf(tmpline, sizeof(tmpline), "%s/lib/modules/%.*s", base_dir,
-				(/* typecast for Alpha */ int)(k - version), version);
-			modpath[nmodpath].path = xstrdup(tmpline);
-			++nmodpath;
-
-			/* The rest of the entries in the path list */
-			for (pathp = tbpath; *pathp; ++pathp) {
-				char **type;
-
-				for (type = tbtype; *type; ++type) {
-					char path[PATH_MAX];
-
-					snprintf(path, sizeof(path), "%s%s/%s", base_dir, *pathp, *type);
-					if (meta_expand(path, &g, NULL, version, ME_ALL))
-						return -1;
-
-					for (glb = g.pathv; glb && *glb; ++glb) {
-						modpath[nmodpath].type = xstrdup(*type);
-						modpath[nmodpath].path = *glb;
-						if (++nmodpath >= maxpath) {
-							maxpath += 100;
-							modpath = (struct PATH_TYPE *)xrealloc(modpath,
-								maxpath * sizeof(struct PATH_TYPE));
-						}
-					}
-				}
-			}
-		}
-
-		/* Environment overrides for testing only, undocumented */
-		for (i = 0; i < gen_file_count; ++i)
-			gen_file_env(gen_file+i);
-
-	}	/* End of depth == 0 */
-
-	if (conf_file ||
-	    ((conf_file = getenv("MODULECONFIG")) != NULL && *conf_file && !safemode)) {
-		if (!(fin = fopen(conf_file, "r"))) {
-			error("Can't open %s", conf_file);
-			return -1;
-		}
-		conf_file_specified = 1;
-	} else {
-		if (!(fin = fopen((conf_file = ETC_MODULES_CONF), "r"))) {
-			/* Fall back to non-standard name */
-			if ((fin = fopen((conf_file = old_name), "r"))) {
-				fprintf(stderr,
-					"Warning: modutils is reading from %s because\n"
-					"         %s does not exist.  The use of %s is\n"
-					"         deprecated, please rename %s to %s\n"
-					"         as soon as possible.  Command\n"
-					"         mv %s %s\n",
-					old_name, ETC_MODULES_CONF,
-					old_name, old_name, ETC_MODULES_CONF,
-					old_name, ETC_MODULES_CONF);
-			}
-			/* So what... use the default configuration */
-		}
-	}
-
-	if (fin) {
-		struct stat statbuf1, statbuf2;
-		if (fstat(fileno(fin), &statbuf1) == 0)
-			config_mtime = statbuf1.st_mtime;
-		config_file = xstrdup(conf_file);	/* Save name actually used */
-		if (!conf_file_specified &&
-		    stat(ETC_MODULES_CONF, &statbuf1) == 0 &&
-		    stat(old_name, &statbuf2) == 0) {
-			/* Both /etc files exist */
-			if (statbuf1.st_dev == statbuf2.st_dev &&
-			    statbuf1.st_ino == statbuf2.st_ino) {
-				if (lstat(ETC_MODULES_CONF, &statbuf1) == 0 &&
-				    S_ISLNK(statbuf1.st_mode))
-					fprintf(stderr,
-						"Warning: You do not need a link from %s to\n"
-						"         %s.  The use of %s is deprecated,\n"
-						"         please remove %s and rename %s\n"
-						"         to %s as soon as possible.  Commands.\n"
-						"           rm %s\n"
-						"           mv %s %s\n",
-						ETC_MODULES_CONF, old_name,
-						old_name, ETC_MODULES_CONF, old_name, ETC_MODULES_CONF,
-						ETC_MODULES_CONF,
-						old_name, ETC_MODULES_CONF);
-				else {
-#ifndef NO_WARN_ON_OLD_LINK
-					fprintf(stderr,
-						"Warning: You do not need a link from %s to\n"
-						"         %s.  The use of %s is deprecated,\n"
-						"         please remove %s as soon as possible.  Command\n"
-						"           rm %s\n",
-						old_name, ETC_MODULES_CONF,
-						old_name, old_name,
-						old_name);
-#endif
-				}
-			}
-			else
-				fprintf(stderr,
-					"Warning: modutils is reading from %s and\n"
-					"         ignoring %s.  The use of %s is deprecated,\n"
-					"         please remove %s as soon as possible.  Command\n"
-					"           rm %s\n",
-					ETC_MODULES_CONF, old_name,
-					old_name, old_name,
-					old_name);
-		}
-	}
-
-	/*
-	 * Finally, decode the file
-	 */
-	while (fin && fgets_strip(buf, sizeof(buf) - 1, fin, &lineno) != NULL) {
-		char *arg2;
-		char *parm = buf;
-		char *arg;
-		int one_err = 0;
-		int adding;
-
-		while (isspace(*parm))
-			parm++;
-
-		if (strncmp(parm, "add", 3) == 0) {
-			adding = 1;
-			parm += 3;
-			while (isspace(*parm))
-				parm++;
-		} else
-			adding = 0;
-
-		arg = parm;
-
-		if (*parm == '\0')
-			continue;
-
-		one_err = 1;
-
-		while (*arg > ' ' && *arg != '=')
-			arg++;
-
-		if (*arg == '=')
-			assgn = 1;
-		else
-			assgn = 0;
-		*arg++ = '\0';
-		while (isspace(*arg))
-			arg++;
-
-		/*
-		 * endif
-		 */
-		if (!assgn && strcmp(parm, "endif") == 0) {
-			if (level > 0)
-				--level;
-			else {
-				error("unmatched endif in line %d", lineno);
-				return -1;
-			}
-			continue;
-		}
-
-		/*
-		 * else
-		 */
-		if (!assgn && strcmp(parm, "else") == 0) {
-			if (level <= 0) {
-				error("else without if in line %d", lineno);
-				return -1;
-			}
-			state[level] = !state[level];
-			continue;
-		}
-
-		/*
-		 * elseif
-		 */
-		if (!assgn && strcmp(parm, "elseif") == 0) {
-			if (level <= 0) {
-				error("elseif without if in line %d", lineno);
-				return -1;
-			}
-			if (state[level] != 0) {
-				/*
-				 * We have already found a TRUE
-				 * if statement in this "chain".
-				 * That's what "2" means.
-				 */
-				state[level] = 2;
-				continue;
-			}
-			/* else: No TRUE if has been found, cheat */
-			/*
-			 * The "if" handling increments level,
-			 * but this is the _same_ level as before.
-			 * So, compensate for it.
-			 */
-			--level;
-			parm = "if";
-			/* Fallthru to "if" */
-		}
-
-		/*
-		 * if
-		 */
-		if (strcmp(parm, "if") == 0) {
-			char *cmp;
-			int not = 0;
-			int numeric = 0;
-
-			if (level >= MAX_LEVEL) {
-				error("Too many nested if's in line %d\n", lineno);
-				return -1;
-			}
-			state[++level] = 0; /* default false */
-
-			if (*arg == '!') {
-				not = 1;
-				arg = next_word(arg);
-			}
-
-			if (strncmp(arg, "-k", 2) == 0) {
-				state[level] = flag_autoclean;
-				continue;
-			}
-
-			if (strncmp(arg, "-f", 2) == 0) {
-				char *file = next_word(arg);
-				meta_expand(file, &g, NULL, version, ME_ALL);
-				if (access(g.pathc ? g.pathv[0] : file, R_OK) == 0)
-					state[level] = !not;
-				else
-					state[level] = not;
-				continue;
-			}
-
-			if (strncmp(arg, "-n", 2) == 0) {
-				numeric = 1;
-				arg = next_word(arg);
-			}
-
-
-			cmp = next_word(arg);
-			if (*cmp) {
-				GLOB_LIST g2;
-				long n1 = 0;
-				long n2 = 0;
-				char *w1 = "";
-				char *w2 = "";
-
-				arg2 = next_word(cmp);
-
-				meta_expand(arg, &g, NULL, version, ME_ALL);
-				if (g.pathc && g.pathv[0])
-					w1 = g.pathv[0];
-
-				meta_expand(arg2, &g2, NULL, version, ME_ALL);
-				if (g2.pathc && g2.pathv[0])
-					w2 = g2.pathv[0];
-
-				if (numeric) {
-					n1 = strtol(w1, NULL, 0);
-					n2 = strtol(w2, NULL, 0);
-				}
-
-				if (strcmp(cmp, "==") == 0 ||
-				    strcmp(cmp, "=") == 0) {
-					if (numeric)
-					    state[level] = (n1 == n2);
-					else
-					    state[level] = strcmp(w1, w2) == 0;
-				} else if (strcmp(cmp, "!=") == 0) {
-					if (numeric)
-					    state[level] = (n1 != n2);
-					else
-					    state[level] = strcmp(w1, w2) != 0;
-				} else if (strcmp(cmp, ">=") == 0) {
-					if (numeric)
-					    state[level] = (n1 >= n2);
-					else
-					    state[level] = strcmp(w1, w2) >= 0;
-				} else if (strcmp(cmp, "<=") == 0) {
-					if (numeric)
-					    state[level] = (n1 <= n2);
-					else
-					    state[level] = strcmp(w1, w2) <= 0;
-				} else if (strcmp(cmp, ">") == 0) {
-					if (numeric)
-					    state[level] = (n1 > n2);
-					else
-					    state[level] = strcmp(w1, w2) > 0;
-				} else if (strcmp(cmp, "<") == 0) {
-					if (numeric)
-					    state[level] = (n1 < n2);
-					else
-					    state[level] = strcmp(w1, w2) < 0;
-				}
-			} else { /* Check defined value, if any */
-				/* undef or defined as
-				 *	"" or "0" or "false" => false
-				 *  defined => true
-				 */
-				if (!meta_expand(arg, &g, NULL, version, ME_ALL) &&
-				    g.pathc > 0 &&
-				    strcmp(g.pathv[0], "0") != 0 &&
-				    strcmp(g.pathv[0], "false") != 0 &&
-				    strlen(g.pathv[0]) != 0)
-					state[level] = 1; /* true */
-			}
-			if (not)
-				state[level] = !state[level];
-
-			continue;
-		}
-
-		/*
-		 * Should we bother?
-		 */
-		if (state[level] != 1)
-			continue;
-
-		/*
-		 * define
-		 */
-		if (!assgn && strcmp(parm, "define") == 0) {
-			char env[PATH_MAX];
-
-			arg2 = next_word(arg);
-			meta_expand(arg2, &g, NULL, version, ME_ALL);
-			snprintf(env, sizeof(env), "%s=%s", arg, (g.pathc ? g.pathv[0] : ""));
-			putenv(xstrdup(env));
-			one_err = 0;
-		}
-
-		/*
-		 * include
-		 */
-		if (!assgn && strcmp(parm, "include") == 0) {
-			meta_expand(arg, &g, NULL, version, ME_ALL);
-
-			if (!do_read(all, version, base_dir, g.pathc ? g.pathv[0] : arg, depth+1))
-				one_err = 0;
-			else
-				error("include %s failed\n", arg);
-		}
-
-		/*
-		 * above
-		 */
-		else if (all && !assgn && strcmp(parm, "above") == 0) {
-			decode_list(&n_abovelist, &abovelist, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * below
-		 */
-		else if (all && !assgn && strcmp(parm, "below") == 0) {
-			decode_list(&n_belowlist, &belowlist, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * prune
-		 */
-		else if (!assgn && strcmp(parm, "prune") == 0) {
-			decode_list(&n_prunelist, &prunelist, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * probe
-		 */
-		else if (all && !assgn && strcmp(parm, "probe") == 0) {
-			decode_list(&n_probe_list, &probe_list, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * probeall
-		 */
-		else if (all && !assgn && strcmp(parm, "probeall") == 0) {
-			decode_list(&n_probeall_list, &probeall_list, arg, adding, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * options
-		 */
-		else if (all && !assgn && strcmp(parm, "options") == 0) {
-			decode_list(&n_opt_list, &opt_list, arg, adding, version, 1);
-			one_err = 0;
-		}
-
-		/*
-		 * alias
-		 */
-		else if (all && !assgn && strcmp(parm, "alias") == 0) {
-			/*
-			 * Replace any previous (default) definitions
-			 * for the same module
-			 */
-			decode_list(&n_aliases, &aliases, arg, 0, version, 0);
-			one_err = 0;
-		}
-
-		/*
-		 * Specification: /etc/modules.conf
-		 * The format of the commands in /etc/modules.conf are:
-		 *
-		 *	pre-install module command
-		 *	install module command
-		 *	post-install module command
-		 *	pre-remove module command
-		 *	remove module command
-		 *	post-remove module command
-		 *
-		 * The different words are separated by tabs or spaces.
-		 */
-		/*
-		 * pre-install
-		 */
-		else if (all && !assgn && (strcmp(parm, "pre-install") == 0)) {
-			decode_exec(arg, EXEC_PRE_INSTALL);
-			one_err = 0;
-		}
-
-		/*
-		 * install
-		 */
-		else if (all && !assgn && (strcmp(parm, "install") == 0)) {
-			decode_exec(arg, EXEC_INSTALL);
-			one_err = 0;
-		}
-
-		/*
-		 * post-install
-		 */
-		else if (all && !assgn && (strcmp(parm, "post-install") == 0)) {
-			decode_exec(arg, EXEC_POST_INSTALL);
-			one_err = 0;
-		}
-
-		/*
-		 * pre-remove
-		 */
-		else if (all && !assgn && (strcmp(parm, "pre-remove") == 0)) {
-			decode_exec(arg, EXEC_PRE_REMOVE);
-			one_err = 0;
-		}
-
-		/*
-		 * remove
-		 */
-		else if (all && !assgn && (strcmp(parm, "remove") == 0)) {
-			decode_exec(arg, EXEC_REMOVE);
-			one_err = 0;
-		}
-
-		/*
-		 * post-remove
-		 */
-		else if (all && !assgn && (strcmp(parm, "post-remove") == 0)) {
-			decode_exec(arg, EXEC_POST_REMOVE);
-			one_err = 0;
-		}
-
-		/*
-		 * insmod_opt=
-		 */
-		else if (assgn && (strcmp(parm, "insmod_opt") == 0)) {
-			insmod_opt = xstrdup(arg);
-			one_err = 0;
-		}
-
-		/*
-		 * keep
-		 */
-		else if (!assgn && (strcmp(parm, "keep") == 0)) {
-			drop_default_paths = 0;
-			one_err = 0;
-		}
-
-		/*
-		 * path...=
-		 */
-		else if (assgn && strncmp(parm, "path", 4) == 0) {
-			/*
-			 * Specification: config file / path parameter
-			 * The path parameter specifies a directory to
-			 * search for modules.
-			 * This parameter may be repeated multiple times.
-			 *
-			 * Note that the actual path may be defined using
-			 * wildcards and other shell meta-chars, such as "*?`".
-			 * For example:
-			 *      path[misc]=/lib/modules/1.1.5?/misc
-			 *
-			 * Optionally the path keyword carries a tag.
-			 * This tells us a little more about the purpose of
-			 * this directory and allows some automated operations.
-			 * A path is marked with a tag by adding the tag,
-			 * enclosed in square brackets, to the path keyword:
-			 * #
-			 * path[boot]=/lib/modules/boot
-			 * #
-			 * This case identifies the path a of directory
-			 * holding modules loadable a boot time.
-			 */
-
-			if (drop_default_paths) {
-				int n;
-
-				/*
-				 * Specification: config file / path / default
-				 *
-				 * Whenever there is a path[] specification
-				 * in the config file, all the default
-				 * path are reset.
-				 *
-				 * If one instead wants to _add_ to the default
-				 * set of paths, one has to have the option
-				 *    keep
-				 * before the first path[]-specification line
-				 * in the configuration file.
-				 */
-				drop_default_paths = 0;
-				for (n = 0; n < nmodpath; n++) {
-					free(modpath[n].path);
-					free(modpath[n].type);
-				}
-				nmodpath = 0;
-			}
-
-			/*
-			 * Get (the optional) tag
-			 * If the tag is missing, the word "misc"
-			 * is assumed.
-			 */
-			type = "misc";
-
-			if (parm[4] == '[') {
-				char *pt_type = parm + 5;
-
-				while (*pt_type != '\0' && *pt_type != ']')
-					pt_type++;
-
-				if (*pt_type == ']' && pt_type[1] == '\0') {
-					*pt_type = '\0';
-					type = parm + 5;
-				} /* else CHECKME */
-			}
-
-			/*
-			 * Handle the actual path description
-			 */
-			if (meta_expand(arg, &g, base_dir, version, ME_ALL))
-				return -1;
-			for (glb = g.pathv; glb && *glb; ++glb) {
-				modpath[nmodpath].type = xstrdup(type);
-				modpath[nmodpath].path = *glb;
-				if (++nmodpath >= maxpath) {
-					maxpath += 100;
-					modpath = (struct PATH_TYPE *)xrealloc(modpath,
-						maxpath * sizeof(struct PATH_TYPE));
-				}
-			}
-			one_err = 0;
-		}
-
-		/*
-		 * persistdir
-		 */
-		else if (assgn && strcmp(parm, "persistdir") == 0) {
-			meta_expand(arg, &g, NULL, version, ME_ALL);
-			persistdir = xstrdup(g.pathc ? g.pathv[0] : arg);
-			one_err = 0;
-		}
-
-		/* Names for generated files in config file */
-		for (i = 0; one_err && i < gen_file_count; ++i)
-			one_err = gen_file_conf(gen_file+i, assgn, parm, arg);
-
-		/*
-		 * any errors so far?
-		 */
-		if (all == 0)
-			one_err = 0;
-		else if (one_err) {
-			error("Invalid line %d in %s\n\t%s",
-				     lineno, conf_file, buf);
-			ret = -1;
-		}
-	}
-	if (fin)
-		fclose(fin);
-
-	if (level) {
-		error("missing endif at %s EOF", conf_file);
-		ret = -1;
-	}
-
-	if (ret)
-		return ret;
-	/* else */
-
-	if (depth == 0) {
-	/* Check we have names for generated files */
-	for (i = 0; !ret && i < gen_file_count; ++i)
-		ret = gen_file_check(gen_file+i, &g, base_dir, version);
-	}
-
-	return ret;
-}
-
-int config_read(int all, char *force_ver, char *base_dir, char *conf_file)
-{
-	int r;
-	if (modpath != NULL)
-		return 0; /* already initialized */
-
-	if (uname(&uts_info) < 0) {
-		error("Failed to find kernel name information");
-		return -1;
-	}
-
-	if (access(MODUTILS_MACROS, R_OK) == 0){
-		r = do_read(all, force_ver, base_dir, MODUTILS_MACROS, 0);
-		r = do_read(all, force_ver, "", conf_file, 1);
-	} else {
-	r = do_read(all, force_ver, base_dir, conf_file, 0);
-	} 
-
-	if (quick && !r && !need_update (force_ver, base_dir))
-		exit (0);
-
-	return r;
-}
-
-/****************************************************************************/
-/*
- *	FIXME: Far too much global state.  KAO.
- */
-static int found;
-static int favail;
-static int one_only;
-static int meta_expand_type;
-char **list;
-static const char *filter_by_file;
-static char *filter_by_dir;
-
-/*
- *	Add a file name if it exist
- */
-static int config_add(const char *file, const struct stat *sb)
-{
-	int i;
-	int npaths = 0;
-	char **paths = NULL;
-
-	if (meta_expand_type) {
-		GLOB_LIST g;
-		char **p;
-		char full[PATH_MAX];
-
-		snprintf(full, sizeof(full), "%s/%s", file, filter_by_file);
-
-		if (filter_by_dir && !strstr(full, filter_by_dir))
-			return 0;
-
-		if (meta_expand(full, &g, NULL, config_version, meta_expand_type))
-			return 1;
-		for (p = g.pathv; p && *p; ++p) {
-			paths = (char **)xrealloc(paths,
-					(npaths + 1) * sizeof(char *));
-			paths[npaths++] = *p;
-		}
-	} else { /* normal path match or match with "*" */
-		if (!S_ISREG(sb->st_mode))
-			return 0;
-
-		if (strcmp(filter_by_file, "*")) {
-			char *p;
-
-			if ((p = strrchr(file, '/')) == NULL)
-				p = (char *)file;
-			else
-				p += 1;
-
-			if (strcmp(p, filter_by_file))
-				return 0;
-		}
-		if (filter_by_dir && !strstr(file, filter_by_dir))
-			return 0;
-		paths = (char **)xmalloc(sizeof(char **));
-		*paths = xstrdup(file);
-		npaths = 1;
-	}
-
-	for (i = 0; i < npaths; ++i) {
-		struct stat sbuf;
-
-		if (S_ISDIR(sb->st_mode)) {
-			if (stat(paths[i], &sbuf) == 0)
-				sb = &sbuf;
-		}
-		if (S_ISREG(sb->st_mode) && sb->st_mode & S_IRUSR) {
-			int j;
-			char **this;
-
-			if (!root_check_off) {
-				if (sb->st_uid != 0) {
-					error("%s is not owned by root", paths[i]);
-					continue;
-				}
-			}
-
-			/* avoid duplicates */
-			for (j = 0, this = list; j < found; ++j, ++this) {
-				if (strcmp(*this, paths[i]) == 0) {
-					free(paths[i]);
-					goto next;
-				}
-			}
-
-			list[found] = paths[i];
-			if (++found >= favail)
-				list = (char **)xrealloc(list,
-				     (favail += 100) * sizeof(char *));
-
-			if (one_only) {
-				for (j = i + 1; j < npaths; ++j)
-					free(paths[j]);
-				free(paths);
-				return 1; /* finish xftw */
-			}
-		}
-	    next:
-	}
-
-	if (npaths > 0)
-		free(paths);
-
-	return 0;
-}
-
-/*
- * Find modules matching the name "match" in directory of type "type"
- * (type == NULL matches all)
- *
- * Return a pointer to the list of modules found (or NULL if error).
- * Update the counter (sent as parameter).
- */
-GLOB_LIST *config_lstmod(const char *match, const char *type, int first_only)
-{
-	/*
-	 * Note:
-	 * There are _no_ wildcards remaining in the path descriptions!
-	 */
-	struct stat sb;
-	int i;
-	int ret = 0;
-	char *path = NULL;
-	char this[PATH_MAX];
-
-	if (!match)
-		match = "*";
-	one_only = first_only;
-	found = 0;
-	filter_by_file = match;
-	filter_by_dir = NULL;
-	if (type) {
-		char tmpdir[PATH_MAX];
-		snprintf(tmpdir, sizeof(tmpdir), "/%s/", type);
-		filter_by_dir = xstrdup(tmpdir);
-	}
-	/* In safe mode, the module name is always handled as is, without meta
-	 * expansion.  It might have come from an end user via kmod and must
-	 * not be trusted.  Even in unsafe mode, only apply globbing to the
-	 * module name, not command expansion.  We trust config file input so
-	 * applying command expansion is safe, we do not trust command line input.
-	 * This assumes that the only time the user can specify -C config file 
-	 * is when they run under their own authority.  In particular all
-	 * mechanisms that call modprobe as root on behalf of the user must
-	 * run in safe mode, without letting the user supply a config filename.
-	 */
-	meta_expand_type = 0;
-	if (strpbrk(match, SHELL_META) && strcmp(match, "*") && !safemode)
-		meta_expand_type = ME_GLOB|ME_BUILTIN_COMMAND;
-
-	list = (char **)xmalloc((favail = 100) * sizeof(char *));
-
-	for (i = 0; i < nmodpath; i++) {
-		path = modpath[i].path;
-		/* Special case: insmod: handle single, non-wildcard match */
-		if (first_only && strpbrk(match, SHELL_META) == NULL) {
-			/* Fix for "2.1.121 syntax */
-			snprintf(this, sizeof(this), "%s/%s/%s", path,
-						  modpath[i].type, match);
-			if (stat(this, &sb) == 0 &&
-			    config_add(this, &sb))
-				break;
-			/* End fix for "2.1.121 syntax */
-
-			snprintf(this, sizeof(this), "%s/%s", path, match);
-			if (stat(this, &sb) == 0 &&
-			    config_add(this, &sb))
-				break;
-		}
-
-		/* Start looking */
-		if ((ret = xftw(path, config_add))) {
-			break;
-		}
-	}
-	if (ret >= 0) {
-		GLOB_LIST *g = (GLOB_LIST *)xmalloc(sizeof(GLOB_LIST));
-		g->pathc = found;
-		g->pathv = list;
-		free(filter_by_dir);
-		return g;
-	}
-	free(list);
-	free(filter_by_dir);
-	return NULL;
-}
-
-/* Given a bare module name, poke through the module path to find the file.  */
-char *search_module_path(const char *base)
-{
-	GLOB_LIST *g;
-
-	if (config_read(0, NULL, "", NULL) < 0)
-		return NULL;
-	/* else */
-	g = config_lstmod(base, NULL, 1);
-	if (g == NULL || g->pathc == 0) {
-		char base_o[PATH_MAX];
-
-		snprintf(base_o, sizeof(base_o), "%s.o", base);
-		g = config_lstmod(base_o, NULL, 1);
-#ifdef CONFIG_USE_ZLIB
-		if (g == NULL || g->pathc == 0) {
-			snprintf(base_o, sizeof(base_o), "%s.o.gz", base);
-			g = config_lstmod(base_o, NULL, 1);
-		}
-#endif
-	}
-	if (g == NULL || g->pathc == 0)
-		return NULL;
-	/* else */
-	return g->pathv[0];
-}
diff --git a/mdk-stage1/insmod-modutils/util/gzfiles.c b/mdk-stage1/insmod-modutils/util/gzfiles.c
deleted file mode 100644
index 8d02253bb..000000000
--- a/mdk-stage1/insmod-modutils/util/gzfiles.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * This simple library intends to make it transparent to read gzipped and/or
- * standard files. This is simple enough to fit modutils' needs, but may be
- * easily adapted to anyone's needs. It's completely free, do what you want
- * with it .  - Willy Tarreau <willy@meta-x.org> - 2000/05/05 -
- */
-
-#ifdef CONFIG_USE_ZLIB
-
-#include <stdio.h>
-#include <zlib.h>
-#include <sys/types.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-/* redefinition of gz_stream which isn't exported by zlib */
-typedef struct gz_stream {
-    z_stream stream;
-    int      z_err;   /* error code for last stream operation */
-    int      z_eof;   /* set if end of input file */
-    FILE     *file;   /* .gz file */
-    Byte     *inbuf;  /* input buffer */
-    Byte     *outbuf; /* output buffer */
-    uLong    crc;     /* crc32 of uncompressed data */
-    char     *msg;    /* error message */
-    char     *path;   /* path name for debugging only */
-    int      transparent; /* 1 if input file is not a .gz file */
-    char     mode;    /* 'w' or 'r' */
-    long     startpos; /* start of compressed data in file (header skipped) */
-} gz_stream;
-
-/* maximum number of simultaneous open files, also greater file descriptor number */
-#define MAXFD	64
-
-/* this static list is assumed to be filled with NULLs at runtime */
-static gzFile gzf_fds[MAXFD];
-
-/* returns the filedesc of the opened file. */
-int gzf_open(const char *name, int mode) {
-    int fd;
-    gzFile g;
-
-    if ((g=gzopen(name, "rb")) != NULL) {
-	fd=fileno(((gz_stream*)g)->file);
-	gzf_fds[fd]=g;
-    }
-    else if ((fd=open(name, mode)) != -1) {
-	gzf_fds[fd]=NULL; /* NULL means not GZ mode */
-    }
-    return fd;
-}
-
-off_t gzf_lseek(int fd, off_t offset, int whence) {
-    if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
-	return lseek(fd, offset, whence);
-    else
-	return gzseek(gzf_fds[fd], offset, whence);
-}
-
-int gzf_read(int fd, void *buf, size_t count) {
-    if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
-	return read(fd, buf, count);
-    else
-	return gzread(gzf_fds[fd], buf, count);
-}
-
-void gzf_close(int fd) {
-    if (fd<0 || fd>=MAXFD || gzf_fds[fd]==NULL)
-	close(fd);
-    else
-	gzclose(gzf_fds[fd]);
-}
-#endif
-
diff --git a/mdk-stage1/insmod-modutils/util/logger.c b/mdk-stage1/insmod-modutils/util/logger.c
deleted file mode 100644
index 4774a0beb..000000000
--- a/mdk-stage1/insmod-modutils/util/logger.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* Error logging facilities.
-   Copyright 1996, 1997 Linux International.
-
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
-  */
-
-#include <limits.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <syslog.h>
-
-#include "util.h"
-
-/*======================================================================*/
-
-int log;
-
-int errors;
-const char *error_file;
-
-#define STOREMSG
-#ifdef STOREMSG
-struct cbuf {
-	struct cbuf *next;
-	int type;
-	char *msg;
-} *head, *tail;
-
-static void dumpmsg(void)
-{
-	for (;head; head = head->next)
-		syslog(head->type, "%s", head->msg);
-}
-#endif /* STOREMSG */
-
-void setsyslog(const char *program)
-{
-	openlog(program, LOG_CONS, LOG_DAEMON);
-#ifdef STOREMSG
-	atexit(dumpmsg);
-#endif
-	log = 1;
-}
-
-#ifdef _STANDALONE_
-static int silent;
-
-const char *program_name;
-
-static void savemsg(int type, char *msg)
-{
-	struct cbuf *me = (struct cbuf *)xmalloc(sizeof(struct cbuf));
-	char *s = xstrdup(msg);
-
-	me->next = NULL;
-	me->type = type;
-	me->msg = s;
-
-	if (tail)
-		tail->next = me;
-	else
-		head = me;
-	tail = me;
-}
-
-void error(const char *fmt,...)
-{
-	va_list args;
-
-	if (silent)
-		;
-	else if (log) {
-		char buf[2*PATH_MAX];
-		int n;
-
-		if (error_file)
-			n = snprintf(buf, sizeof(buf), "%s: ", error_file);
-		else
-			n = 0;
-		va_start(args, fmt);
-		vsnprintf(buf + n, sizeof(buf) - n, fmt, args);
-		va_end(args);
-#ifdef STOREMSG
-		savemsg(LOG_ERR, buf);
-#else
-		syslog(LOG_ERR, "%s", buf);
-#endif
-	} else {
-		if (error_file)
-			fprintf(stderr, "%s: ", error_file);
-		va_start(args, fmt);
-		vfprintf(stderr, fmt, args);
-		va_end(args);
-		putc('\n', stderr);
-	}
-
-	errors++;
-}
-
-void lprintf(const char *fmt,...)
-{
-	va_list args;
-
-	if (silent);
-	else if (log) {
-		char buf[2*PATH_MAX];
-		va_start(args, fmt);
-		vsnprintf(buf, sizeof(buf), fmt, args);
-		va_end(args);
-#ifdef STOREMSG
-		savemsg(LOG_INFO, buf);
-#else
-		syslog(LOG_INFO, "%s", buf);
-#endif
-	} else {
-		va_start(args, fmt);
-		vfprintf(stdout, fmt, args);
-		va_end(args);
-		putchar('\n');
-	}
-}
-#else /* _STANDALONE_ */
-#include "../../log.h"
-void error(const char *s, ...)
-{
-	va_list p;
-
-	va_start(p, s);
-	vlog_message(s, p);
-	va_end(p);
-}
-
-void lprintf(const char *s, ...)
-{
-	va_list p;
-
-	va_start(p, s);
-	vlog_message(s, p);
-	va_end(p);
-}
-#endif
-
diff --git a/mdk-stage1/insmod-modutils/util/meta_expand.c b/mdk-stage1/insmod-modutils/util/meta_expand.c
deleted file mode 100644
index 41fb4024c..000000000
--- a/mdk-stage1/insmod-modutils/util/meta_expand.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * Handle expansion of meta charaters
- *
- * Copyright 1999 Bj�rn Ekwall <bj0rn@blox.se>
- *
- * "kernelversion" idea from the Debian release via:
- *	Wichert Akkerman <wakkerma@cs.leidenuniv.nl>
- *
- * Use wordexp(): idea from Tim Waugh <tim@cyberelk.demon.co.uk>
- *
- * Alpha typecast: Michal Jaegermann <michal@ellpspace.math.ualberta.ca>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#ifdef HAVE_WORDEXP
-#undef HAVE_WORDEXP
-#define HAVE_WORDEXP 0
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <string.h>
-#include <ctype.h>
-#if HAVE_WORDEXP
-#include <wordexp.h>
-#elif HAVE_GLOB
-#include <glob.h>
-#endif
-#include "util.h"
-
-/*
- * Split into words delimited by whitespace,
- * handle remaining quotes though...
- * If strip_quotes != 0 then strip one level of quotes from the line.
- */
-static void split_line(GLOB_LIST *g, char *line, int strip_quotes)
-{
-	int len;
-	char *d;
-	char *e;
-	char *p;
-	char tmpline[PATH_MAX];
-
-	for (p = line; *p; p = e) {
-		/* Skip leading whitespace */
-		while (*p && isspace(*p))
-			++p;
-
-		/* find end of word */
-		d = tmpline;
-		for (e = p; *e && !(isspace(*e)); ++e) {
-			char match;
-
-			/* Quote handling */
-			switch (*e) {
-			case '\\':
-				if (!strip_quotes)
-					*d++ = *e;
-				break;
-
-			case '"':
-			case '\'':
-				match = *e;
-				if (!strip_quotes)
-					*d++ = *e;
-				for (++e; *e && *e != match; ++e) {
-					*d++ = *e;
-					if (*e == '\\' && *(e + 1) == match)
-						*d++ = *++e;
-				}
-				if (!strip_quotes)
-					*d++ = *e;
-				break;
-
-			default:
-				*d++ = *e;
-				break;
-			}
-		}
-
-		if ((len = (int)(d - tmpline)) > 0) {
-			char *str = xmalloc(len + 1);
-			strncpy(str, tmpline, len);
-			str[len] = '\0';
-			g->pathv = (char **)xrealloc(g->pathv,
-				   (g->pathc + 2) * sizeof(char *));
-			g->pathv[g->pathc++] = str;
-		}
-	}
-
-	if (g->pathc)
-		g->pathv[g->pathc] = NULL;
-}
-
-static int glob_it(char *pt, GLOB_LIST *g)
-{
-#if HAVE_WORDEXP
-	wordexp_t w;
-
-	memset(&w, 0, sizeof(w));
-	if (wordexp(pt, &w, WRDE_UNDEF)) {
-		/*
-		error("wordexp %s failed", pt);
-		*/
-		return -1;
-	}
-	/* else */
-	g->pathc = w.we_wordc;
-	g->pathv = w.we_wordv;
-
-	return 0;
-#elif HAVE_GLOB /* but not wordexp */
-	glob_t w;
-
-	memset(&w, 0, sizeof(w));
-	if (glob(pt, GLOB_NOSORT, NULL, &w)) {
-		/*
-		error("glob %s failed", pt);
-		*/
-		return -1;
-	}
-	/* else */
-	if (w.gl_pathc && strpbrk(w.gl_pathv[0], SHELL_META)) {
-		globfree(&w);
-		return -1;
-	}
-	g->pathc = w.gl_pathc;
-	g->pathv = w.gl_pathv;
-
-	return 0;
-#else /* Neither wordexp nor glob */
-	return -1;
-#endif
-}
-
-/*
- * Expand the string (including meta-character) to a list of matches
- *
- * Return 0 if OK else -1
- */
-int meta_expand(char *pt, GLOB_LIST *g, char *base_dir, char *version, int type)
-{
-	FILE *fin;
-	int len = 0;
-	char *line = NULL;
-	char *p, *p1;
-	char tmpline[PATH_MAX + 1];
-	char wrk[sizeof(tmpline)];
-	char tmpcmd[2*sizeof(tmpline)+20];	/* room for /bin/echo "text" */
-
-	g->pathc = 0;
-	g->pathv = NULL;
-
-	/*
-	 * Take care of version dependent expansions
-	 * Needed for forced version handling
-	 */
-	if ((p = strchr(pt, '`')) != NULL && (type & ME_BUILTIN_COMMAND)) {
-		do {
-			char *s;
-
-			for (s = p + 1; isspace(*s); ++s)
-				;
-
-			if (strncmp(s, "uname -r", 8) == 0) {
-				while (*s && (*s != '`'))
-					++s;
-				if (*s == '`') {
-					*p = '\0';
-					snprintf(wrk, sizeof(wrk), "%s%s%s",
-						     pt,
-						     version,
-						     s + 1);
-					*p = '`';
-				}
-				strcpy(tmpline, wrk);	/* safe, same size */
-				pt = tmpline;
-			} else if (strncmp(s, "kernelversion", 13) == 0) {
-				while (*s && (*s != '`'))
-					++s;
-				if (*s == '`') {
-					int n;
-					char *k;
-
-					*p = '\0';
-					for (n = 0, k = version; *k; ++k) {
-						if (*k == '.' && ++n == 2)
-							break;
-					}
-					snprintf(wrk, sizeof(wrk), "%s%.*s%s",
-						     pt,
-						     /* typecast for Alpha */
-						     (int)(k - version),
-						     version,
-						     s + 1);
-					*p = '`';
-					strcpy(tmpline, wrk);	/* safe, same size */
-					pt = tmpline;
-				}
-			} else
-				break;
-		} while ((p = strchr(pt, '`')) != NULL);
-	}
-
-	/*
-	 * Any remaining meta-chars?
-	 */
-	if (strpbrk(pt, SHELL_META) == NULL) {
-		/*
-		 * No meta-chars.
-		 * Split into words, delimited by whitespace.
-		 */
-		snprintf(wrk, sizeof(wrk), "%s%s", (base_dir ? base_dir : ""), pt);
-		strcpy(tmpline, wrk);	/* safe, same size */
-		if ((p = strtok(tmpline, " \t\n")) != NULL) {
-			while (p) {
-				g->pathv = (char **)xrealloc(g->pathv,
-					   (g->pathc + 2) * sizeof(char *));
-				g->pathv[g->pathc++] = xstrdup(p);
-				p = strtok(NULL, " \t\n");
-			}
-		}
-		if (g->pathc)
-			g->pathv[g->pathc] = NULL;
-		return 0;
-	}
-	/* else */
-	/*
-	 * Handle remaining meta-chars
-	 */
-
-	/*
-	 * Just plain quotes?
-	 */
-	if (strpbrk(pt, "&();|<>$`!{}[]~=+:?*") == NULL &&
-	    (p = strpbrk(pt, "\"'\\"))) {
-		split_line(g, pt, 1);
-		return 0;
-	}
-
-	if (strpbrk(pt, "&();|<>$`\"'\\!{}~+:[]~?*") == NULL) {
-		/* Only "=" remaining, should be module options */
-		split_line(g, pt, 0);
-		return 0;
-	}
-
-	/*
-	 * If there are meta-characters and
-	 * if they are only shell glob meta-characters: do globbing
-	 */
-#if HAVE_WORDEXP
-	if (strpbrk(pt, "&();|<>`\"'\\!{}~=+:") == NULL &&
-	    strpbrk(pt, "$[]~?*"))
-#else
-	if (strpbrk(pt, "&();|<>$`\"'\\!{}~=+:") == NULL &&
-	    strpbrk(pt, "[]~?*"))
-#endif
-		if ((type & ME_GLOB) && glob_it(pt, g) == 0)
-			return 0;
-
-	if (strpbrk(pt, "&();|<>$`\"'\\!{}~+:[]~?*") == NULL) {
-		/* Only "=" remaining, should be module options */
-		split_line(g, pt, 0);
-		return 0;
-	}
-
-	/*
-	 * Last resort: Use "echo".
-	 * DANGER: Applying shell expansion to user supplied input is a
-	 *         major security risk.  Modutils code should only do meta
-	 *         expansion via shell commands for trusted data.  Basically
-	 *         this means only for data in the config file.   Even that
-	 *         assumes that the user cannot run modprobe as root with
-	 *         their own config file.  Programs (including the kernel)
-	 *         that invoke modprobe as root with user supplied input must
-	 *         pass exactly one user supplied parameter and must set
-	 *         safe mode.
-	 */
-	if (!(type & ME_SHELL_COMMAND))
-		return 0;
-	snprintf(wrk, sizeof(wrk), "%s%s", (base_dir ? base_dir : ""), pt);
-	strcpy(tmpline, wrk);	/* safe, same size */
-	snprintf(tmpcmd, sizeof(tmpcmd), "/bin/echo \"");
-	for (p = tmpline, p1 = tmpcmd + strlen(tmpcmd); *p; ++p, ++p1) {
-		if (*p == '"' || *p == '\\')
-			*p1++ = '\\';
-		*p1 = *p;
-	}
-	*p1++ = '"';
-	*p1++ = '\0';
-	if (p1 - tmpcmd > sizeof(tmpcmd)) {
-		error("tmpcmd overflow, should never happen");
-		exit(1);
-	}
-	if ((fin = popen(tmpcmd, "r")) == NULL) {
-		error("Can't execute: %s", tmpcmd);
-		return -1;
-	}
-	/* else */
-
-	/*
-	 * Collect the result
-	 */
-	while (fgets(tmpcmd, PATH_MAX, fin) != NULL) {
-		int l = strlen(tmpcmd);
-
-		line = (char *)xrealloc(line, len + l + 1);
-		line[len] = '\0';
-		strcat(line + len, tmpcmd);	/* safe, realloc */
-		len += l;
-	}
-	pclose(fin);
-
-	if (line) {
-		/* shell used to strip one set of quotes.  Paranoia code in
-		 * 2.3.20 stops that strip so we do it ourselves.
-		 */
-		split_line(g, line, 1);
-		free(line);
-	}
-
-	return 0;
-}
diff --git a/mdk-stage1/insmod-modutils/util/modstat.c b/mdk-stage1/insmod-modutils/util/modstat.c
deleted file mode 100644
index ad82306c0..000000000
--- a/mdk-stage1/insmod-modutils/util/modstat.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * Get kernel symbol table(s) and other relevant module info.
- *
- * Add module_name_list and l_module_name_list.
- *   Keith Owens <kaos@ocs.com.au> November 1999.
- * Bj�rn Ekwall <bj0rn@blox.se> in February 1999 (C)
- * Initial work contributed by Richard Henderson <rth@tamu.edu>
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <errno.h>
-#include "util.h"
-#include "module.h"
-#include "obj.h"
-#include "modstat.h"
-
-struct module_stat *module_stat;
-size_t n_module_stat;
-char *module_name_list;
-size_t l_module_name_list;
-struct module_symbol *ksyms;
-size_t nksyms;
-int k_new_syscalls;
-
-static void *old_kernsym;
-
-/************************************************************************/
-static void drop(void)
-{
-	/*
-	 * Clean the slate for multiple runs
-	 */
-	if (module_stat) {
-		struct module_stat *m;
-		int i;
-
-		for (i = 0, m = module_stat; i < n_module_stat; ++i, ++m) {
-			if (m->syms)
-				free(m->syms);
-			if (m->refs)
-				free(m->refs);
-		}
-		free(module_stat);
-		module_stat = NULL;
-		n_module_stat = 0;
-	}
-	if (module_name_list) {
-		free(module_name_list);
-		module_name_list = NULL;
-		l_module_name_list = 0;
-	}
-	if (ksyms) {
-		free(ksyms);
-		ksyms = NULL;
-		nksyms = 0;
-	}
-	if (old_kernsym) {
-		free(old_kernsym);
-		old_kernsym = NULL;
-	}
-}
-
-static int new_get_kernel_info(int type)
-{
-	struct module_stat *modules;
-	struct module_stat *m;
-	struct module_symbol *syms;
-	struct module_symbol *s;
-	size_t ret;
-	size_t bufsize;
-	size_t nmod;
-	size_t nsyms;
-	size_t i;
-	size_t j;
-	char *module_names;
-	char *mn;
-
-	drop();
-
-	/*
-	 * Collect the loaded modules
-	 */
-	module_names = xmalloc(bufsize = 256);
-	while (query_module(NULL, QM_MODULES, module_names, bufsize, &ret)) {
-		if (errno != ENOSPC) {
-			error("QM_MODULES: %m\n");
-			return 0;
-		}
-		module_names = xrealloc(module_names, bufsize = ret);
-	}
-	module_name_list = module_names;
-	l_module_name_list = bufsize;
-	n_module_stat = nmod = ret;
-	module_stat = modules = xmalloc(nmod * sizeof(struct module_stat));
-	memset(modules, 0, nmod * sizeof(struct module_stat));
-
-	/* Collect the info from the modules */
-	for (i = 0, mn = module_names, m = modules;
-	     i < nmod;
-	     ++i, ++m, mn += strlen(mn) + 1) {
-		struct module_info info;
-
-		m->name = mn;
-		if (query_module(mn, QM_INFO, &info, sizeof(info), &ret)) {
-			if (errno == ENOENT) {
-			/* The module was removed out from underneath us. */
-				m->flags = NEW_MOD_DELETED;
-				continue;
-			}
-			/* else oops */
-			error("module %s: QM_INFO: %m", mn);
-			return 0;
-		}
-
-		m->addr = info.addr;
-
-		if (type & K_INFO) {
-			m->size = info.size;
-			m->flags = info.flags;
-			m->usecount = info.usecount;
-			m->modstruct = info.addr;
-		}
-
-		if (type & K_REFS) {
-			int mm;
-			char *mrefs;
-			char *mr;
-
-			mrefs = xmalloc(bufsize = 64);
-			while (query_module(mn, QM_REFS, mrefs, bufsize, &ret)) {
-				if (errno != ENOSPC) {
-					error("QM_REFS: %m");
-					return 1;
-				}
-				mrefs = xrealloc(mrefs, bufsize = ret);
-			}
-			for (j = 0, mr = mrefs;
-			     j < ret;
-			     ++j, mr += strlen(mr) + 1) {
-				for (mm = 0; mm < i; ++mm) {
-					if (strcmp(mr, module_stat[mm].name) == 0) {
-						m->nrefs += 1;
-						m->refs = xrealloc(m->refs, m->nrefs * sizeof(struct module_stat **));
-						m->refs[m->nrefs - 1] = module_stat + mm;
-						break;
-					}
-				}
-			}
-			free(mrefs);
-		}
-
-		if (type & K_SYMBOLS) { /* Want info about symbols */
-			syms = xmalloc(bufsize = 1024);
-			while (query_module(mn, QM_SYMBOLS, syms, bufsize, &ret)) {
-				if (errno == ENOSPC) {
-					syms = xrealloc(syms, bufsize = ret);
-					continue;
-				}
-				if (errno == ENOENT) {
-					/*
-					 * The module was removed out
-					 * from underneath us.
-					 */
-					m->flags = NEW_MOD_DELETED;
-					free(syms);
-					goto next;
-				} else {
-					error("module %s: QM_SYMBOLS: %m", mn);
-					return 0;
-				}
-			}
-			nsyms = ret;
-
-			m->nsyms = nsyms;
-			m->syms = syms;
-
-			/* Convert string offsets to string pointers */
-			for (j = 0, s = syms; j < nsyms; ++j, ++s)
-				s->name += (unsigned long) syms;
-		}
-		next:
-	}
-
-	if (type & K_SYMBOLS) { /* Want info about symbols */
-		/* Collect the kernel's symbols.  */
-		syms = xmalloc(bufsize = 16 * 1024);
-		while (query_module(NULL, QM_SYMBOLS, syms, bufsize, &ret)) {
-			if (errno != ENOSPC) {
-				error("kernel: QM_SYMBOLS: %m");
-				return 0;
-			}
-			syms = xrealloc(syms, bufsize = ret);
-		}
-		nksyms = nsyms = ret;
-		ksyms = syms;
-
-		/* Convert string offsets to string pointers */
-		for (j = 0, s = syms; j < nsyms; ++j, ++s)
-			s->name += (unsigned long) syms;
-	}
-
-	return 1;
-}
-
-#ifdef COMPAT_2_0
-/************************************************************************/
-
-#define mscan(offs,siz,ptr) \
-	if (lseek(kmem_fd, (off_t)(offs), SEEK_SET) == -1 || \
-	    read(kmem_fd, (ptr), (siz)) != (siz)) { \
-		if (kmem_fd != -1) \
-			close(kmem_fd); \
-		error("kmem: %m"); \
-		return 0; \
-	}
-
-#define OLD_MOD_RUNNING 1
-#define OLD_MOD_DELETED 2
-#define OLD_MOD_VISITED   0x20000000
-
-/* Fetch all the symbols and divvy them up as appropriate for the modules.  */
-static int old_get_kernel_info(int type)
-{
-	struct old_kernel_sym *kernsym;
-	struct old_kernel_sym *k;
-	struct module_stat *module;
-	struct module_stat *mod;
-	struct module_symbol *s = NULL;
-	int kmem_fd = -1;
-	int nkernsym;
-	int nmod;
-	int nm;
-	int nms;
-	int i;
-
-	drop();
-	module_name_list = xmalloc(1);
-	*module_name_list = '\0';
-
-	if ((nkernsym = get_kernel_syms(NULL)) < 0) {
-		error("get_kernel_syms: %m");
-		return 0;
-	}
-	kernsym = k = xmalloc(nkernsym * sizeof(struct old_kernel_sym));
-	old_kernsym = kernsym;
-	if (get_kernel_syms(kernsym) != nkernsym) {
-		error("inconsistency with get_kernel_syms -- is someone else "
-		      "playing with modules?");
-		free(kernsym);
-		return 0;
-	}
-
-	/* Number of modules */
-	for (k = kernsym, nmod = 0, i = 0; i < nkernsym; ++i, ++k) {
-		if (k->name[0] == '#') {
-			if (k->name[1]) {
-				++nmod;
-				i = strlen(k->name+1) + 1;
-				module_name_list =
-					xrealloc(module_name_list,
-					l_module_name_list + i);
-				strcpy(module_name_list+l_module_name_list,	/* safe, xrealloc */
-					k->name+1);
-				l_module_name_list += i;	/* NUL separated strings */
-			}
-			else
-				break;
-		}
-	}
-	module_stat = mod = module = xmalloc(nmod * sizeof(struct module_stat));
-	memset(module, 0, nmod * sizeof(struct module_stat));
-	n_module_stat = nmod;
-
-	/*
-	 * Will we need kernel internal info?
-	 */
-	if ((type & K_INFO) || (type & K_REFS)) {
-		if ((kmem_fd = open("/dev/kmem", O_RDONLY)) < 0) {
-			perror("ksyms: open /dev/kmem");
-			return 0;
-		}
-	}
-
-	/*
-	 * Collect the module information.
-	 */
-	for (k = kernsym, nm = 0, i = 0; i < nkernsym; ++i, ++k) {
-		if (k->name[0] == '#') {
-			struct old_kernel_sym *p;
-			struct old_module info;
-
-			if (k->name[1] == '\0')
-				break; /* kernel resident symbols follow */
-			/* else normal module */
-
-			module = mod++;
-			++nm;
-			module->name = k->name + 1;
-			module->modstruct = k->value;
-
-			if ((type & K_INFO) || (type & K_REFS)) {
-				long tmp;
-				/*
-				 * k->value is the address of the
-				 * struct old_module
-				 * in the kernel (for use via /dev/kmem)
-				 */
-				mscan(k->value, sizeof(info), &info);
-				module->addr = info.addr;
-				module->size = info.size * getpagesize();
-
-				mscan(info.addr, sizeof(long), &tmp);
-				module->flags = info.state &
-						(OLD_MOD_RUNNING | OLD_MOD_DELETED);
-				module->flags |= NEW_MOD_USED_ONCE; /* Cheat */
-				if (tmp & OLD_MOD_AUTOCLEAN)
-					module->flags |= NEW_MOD_AUTOCLEAN;
-				if (tmp & OLD_MOD_VISITED)
-					module->flags |= NEW_MOD_VISITED;
-
-				module->usecount = tmp & ~(OLD_MOD_AUTOCLEAN | OLD_MOD_VISITED);
-			}
-
-			if ((type & K_REFS) && info.ref) {
-				struct old_module_ref mr;
-				int j;
-				unsigned long ref = info.ref;
-
-				do {
-					mscan(ref, sizeof(struct old_module_ref), &mr);
-					for (j = 0; j < nm -1; ++j) {
-						if (mr.module == module_stat[j].modstruct) {
-							module->nrefs += 1;
-							module->refs = xrealloc(module->refs, module->nrefs * sizeof(struct module_stat **));
-							module->refs[module->nrefs - 1] = module_stat + j;
-							break;
-						}
-					}
-				} while ((ref = mr.next) != 0);
-			}
-
-			if (!(type & K_SYMBOLS))
-				continue;
-			/*
-			 * Find out how many symbols this module has.
-			 */
-			for (nms = 0, p = k+1; p->name[0] != '#'; ++p)
-				++nms;
-			s = xmalloc(nms * sizeof(struct module_symbol));
-			module->syms = s;
-			module->nsyms = nms;
-		} else if (type & K_SYMBOLS) { /* Want info about symbols */
-			s->name = (unsigned long) k->name;
-			s->value = k->value;
-			++s;
-		}
-	}
-	if ((type & K_INFO) || (type & K_REFS)) {
-		if (kmem_fd != -1)
-			close(kmem_fd);
-	}
-
-	/*
-	 * Kernel resident symbols follows
-	 */
-	if (type & K_SYMBOLS) { /* Want info about symbols */
-		if (k->name[0] == '#')
-			++k;
-		nksyms = nkernsym - (k - kernsym);
-		if (nksyms) {
-			ksyms = s = xmalloc(nksyms * sizeof(struct module_symbol));
-			for (i = 0; i < nksyms; ++i, ++k) {
-				if (k->name[0] != '#') {
-					s->name = (unsigned long) k->name;
-					s->value = k->value;
-					++s;
-				}
-			}
-			nksyms = s - ksyms;
-		} else
-			ksyms = NULL;
-	}
-
-	return 1;
-}
-#endif /* COMPAT_2_0 */
-
-int get_kernel_info(int type)
-{
-	k_new_syscalls = !query_module(NULL, 0, NULL, 0, NULL);
-
-#ifdef COMPAT_2_0
-	if (!k_new_syscalls)
-		return old_get_kernel_info(type);
-#endif /* COMPAT_2_0 */
-
-	return new_get_kernel_info(type);
-}
diff --git a/mdk-stage1/insmod-modutils/util/snap_shot.c b/mdk-stage1/insmod-modutils/util/snap_shot.c
deleted file mode 100644
index adf54d28e..000000000
--- a/mdk-stage1/insmod-modutils/util/snap_shot.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* Take a snap shot of ksyms and modules for Oops debugging
-   Copyright 1999 Linux International.
-
-   Contributed by Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
-  */
-
-#include <errno.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <time.h>
-#include <unistd.h>
-#include <string.h>
-
-#include "module.h"
-#include "obj.h"
-#include "modstat.h"
-#include "util.h"
-
-static char snap_dir[] = "/var/log/ksymoops";
-
-/* If snap_dir exists, take a snap shot of ksyms and modules to snap_dir.
- * Prefix the files with the equivalent of
- * date +%Y%m%d%T%M%S | sed -e 's/://g'
- */
-void snap_shot(const char *module_names, int n_module_names)
-{
-	char file[] = "ccyymmddhhmmss.modules", buffer[4096];
-	static char *infile[] = { "/proc/ksyms", "/proc/modules" };
-	static char *suffix[] = {       "ksyms",       "modules" };
-	struct tm *local;
-	time_t t;
-	int i, l;
-	FILE *in, *out;
-
-	if (module_names) {
-		/* Only snap shot if the list of modules has changed.
-		 * Otherwise auto cleanup takes a snap shot every time
-		 * and ends up with a large snap shot directory.
-		 */
-		char *new_module_names;
-		size_t n_new_module_names;
-		get_kernel_info(0);
-		new_module_names = module_name_list;
-		n_new_module_names = n_module_stat;
-		if (n_module_names && n_new_module_names == n_module_names) {
-			while (n_module_names) {
-				if (strcmp(module_names, new_module_names))
-					break;	/* difference detected */
-				i = strlen(module_names) + 1;
-				module_names += i;
-				new_module_names += i;
-				--n_module_names;
-			}
-		}
-		if (!n_module_names)
-			return;	/* no difference, no need for snap shot */
-	}
-
-	if (chdir(snap_dir))
-		return;
-	t = time(NULL);
-	local = localtime(&t);
-	for (i = 0; i < sizeof(infile)/sizeof(infile[0]); ++i) {
-		snprintf(file, sizeof(file), "%04d%02d%02d%02d%02d%02d.%s",
-			local->tm_year+1900,
-			local->tm_mon + 1,
-			local->tm_mday,
-			local->tm_hour,
-			local->tm_min,
-			local->tm_sec,
-			suffix[i]);
-		out = fopen(file, "w");
-		if (!out) {
-			error("cannot create %s/%s %m", snap_dir, file);
-			return;
-		}
-		in = fopen(infile[i], "r");
-		if (!in) {
-			error("cannot open %s %m", infile[i]);
-			return;
-		}
-		while ((l = fread(buffer, 1, sizeof(buffer), in)) > 0) {
-			if (fwrite(buffer, l, 1, out) != 1) {
-				error("unable to write to %s %m", file);
-				fclose(in);
-				fclose(out);
-				return;
-			}
-		}
-		if (ferror(in))
-			error("unable to read from %s %m", infile[i]);
-		fclose(in);
-		fflush(out);
-		fclose(out);
-	}
-}
-
-/* If snap_dir exists, log a message to snap_dir.  The log file is called the
- * equivalent of date +%Y%m%d | sed -e 's/://g'.  Each line is prefixed with
- * timestamp down to seconds and followed by a newline.
- */
-void snap_shot_log(const char *fmt,...)
-{
-	char date[] = "ccyymmdd", file[] = "ccyymmdd.log", stamp[] = "ccyymmdd hhmmss";
-	struct tm *local;
-	time_t t;
-	FILE *log;
-	va_list args;
-	int save_errno = errno;
-
-	if (chdir(snap_dir))
-		return;
-	t = time(NULL);
-	local = localtime(&t);
-	snprintf(date, sizeof(date), "%04d%02d%02d",
-			local->tm_year+1900,
-			local->tm_mon + 1,
-			local->tm_mday);
-	snprintf(file, sizeof(file), "%s.log", date);
-	log = fopen(file, "a");
-	if (!log) {
-		error("cannot create %s/%s %m", snap_dir, file);
-		return;
-	}
-	snprintf(stamp, sizeof(stamp), "%s %02d%02d%02d",
-		date,
-		local->tm_hour,
-		local->tm_min,
-		local->tm_sec);
-	fprintf(log, "%s ", stamp);
-	va_start(args, fmt);
-	errno = save_errno;	/* fmt may use %m */
-	vfprintf(log, fmt, args);
-	va_end(args);
-	fprintf(log, "\n");
-	fflush(log);
-	fclose(log);
-}
diff --git a/mdk-stage1/insmod-modutils/util/sys_cm.c b/mdk-stage1/insmod-modutils/util/sys_cm.c
deleted file mode 100644
index d19a5ba4b..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_cm.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#if defined(__i386__) || defined(__m68k__) || defined(__arm__)
-
-#define __NR__create_module  __NR_create_module
-static inline _syscall2(long, _create_module, const char *, name, size_t, size)
-
-unsigned long create_module(const char *name, size_t size)
-{
-  /* Why all this fuss?
-
-     In linux 2.1, the address returned by create module point in
-     kernel space which is now mapped at the top of user space (at
-     0xc0000000 on i386). This looks like a negative number for a
-     long. The normal syscall macro of linux 2.0 (and all libc compile
-     with linux 2.0 or below) consider that the return value is a
-     negative number and consider it is an error number (A kernel
-     convention, return value are positive or negative, indicating the
-     error number).
-
-     By checking the value of errno, we know if we have been fooled by
-     the syscall2 macro and we fix it.  */
-
-  long ret = _create_module(name, size);
-  if (ret == -1 && errno > 125)
-    {
-      ret = -errno;
-      errno = 0;
-    }
-  return ret;
-}
-
-#elif defined(__alpha__)
-
-/* Alpha doesn't have the same problem, exactly, but a bug in older
-   kernels fails to clear the error flag.  Clear it here explicitly.  */
-
-#define __NR__create_module  __NR_create_module
-static inline _syscall4(unsigned long, _create_module, const char *, name,
-			size_t, size, size_t, dummy, size_t, err);
-
-unsigned long create_module(const char *name, size_t size)
-{
-  return _create_module(name, size, 0, 0);
-}
-
-#else
-
-/* Sparc, MIPS, (and Alpha, but that's another problem) don't mistake
-   return values for errors due to the nature of the system call.  */
-
-_syscall2(unsigned long, create_module, const char *, name, size_t, size)
-
-#endif
diff --git a/mdk-stage1/insmod-modutils/util/sys_dm.c b/mdk-stage1/insmod-modutils/util/sys_dm.c
deleted file mode 100644
index 611234efa..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_dm.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-_syscall1(int, delete_module, const char *, name)
diff --git a/mdk-stage1/insmod-modutils/util/sys_gks.c b/mdk-stage1/insmod-modutils/util/sys_gks.c
deleted file mode 100644
index b639fc990..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_gks.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-_syscall1(int, get_kernel_syms, struct old_kernel_sym *, ksyms)
diff --git a/mdk-stage1/insmod-modutils/util/sys_nim.c b/mdk-stage1/insmod-modutils/util/sys_nim.c
deleted file mode 100644
index c267ddf10..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_nim.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#ifndef CONFIG_USE_SYSCALL
-
-extern int init_module(const char *name, const struct module *info);
-
-int 
-sys_init_module(const char *name, const struct module *info)
-{
-  return init_module(name, info);
-}
-
-#else
-
-#define __NR_sys_init_module  __NR_init_module
-_syscall2(int, sys_init_module, const char *, name,
-	  const struct module *, info)
-
-#endif
diff --git a/mdk-stage1/insmod-modutils/util/sys_oim.c b/mdk-stage1/insmod-modutils/util/sys_oim.c
deleted file mode 100644
index b915e36a5..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_oim.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-#define __NR_old_sys_init_module  __NR_init_module
-_syscall5(int, old_sys_init_module, const char *, name, char *, code,
-	  unsigned, codesize, struct old_mod_routines *, routines,
-	  struct old_symbol_table *, symtab)
diff --git a/mdk-stage1/insmod-modutils/util/sys_qm.c b/mdk-stage1/insmod-modutils/util/sys_qm.c
deleted file mode 100644
index ba478832b..000000000
--- a/mdk-stage1/insmod-modutils/util/sys_qm.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Functions for the Linux module syscall interface.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <errno.h>
-
-#include "module.h"
-
-/* Kernel headers before 2.1.mumble need this on the Alpha to get
-   _syscall* defined.  */
-#define __LIBRARY__
-
-#include <asm/unistd.h>
-
-
-/*======================================================================*/
-
-/* I am fucking tired of the "this doesn't build on 2.0.x" questions.
-   But if you ask, we still officially require 2.1.x to build.  */
-#if !defined(__NR_query_module)
-# if defined(__i386__)
-#  define __NR_query_module 167
-# elif defined(__alpha__)
-#  define __NR_query_module 347
-# elif defined(__sparc__)
-#  define __NR_query_module 184
-# elif defined(__mc68000__)
-#  define __NR_query_module 167
-# elif defined(__arm__)
-#  define __NR_query_module (__NR_SYSCALL_BASE + 167)
-# elif defined(__mips__)
-#  define __NR_query_module 4187
-# endif
-#endif
-
-_syscall5(int, query_module, const char *, name, int, which,
-	  void *, buf, size_t, bufsize, size_t *, ret);
diff --git a/mdk-stage1/insmod-modutils/util/xftw.c b/mdk-stage1/insmod-modutils/util/xftw.c
deleted file mode 100644
index fe764a63c..000000000
--- a/mdk-stage1/insmod-modutils/util/xftw.c
+++ /dev/null
@@ -1,422 +0,0 @@
-/*
- * modutils specific implementation of ftw().
- *
- * Copyright 2000:
- *  Keith Owens <kaos@ocs.com.au> August 2000
- *
- * This file is part of the Linux modutils.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
-    modutils requires special processing during the file tree walk
-    of /lib/modules/<version> and any paths that the user specifies.
-    The standard ftw() does a blind walk of all paths and can end
-    up following the build symlink down the kernel source tree.
-    Although nftw() has the option to get more control such as not
-    automatically following symbolic links, even that is not enough
-    for modutils.  The requirements are:
-
-    Paths must be directories or symlinks to directories.
-
-    Each directory is read and sorted into alphabetical order
-    before processing.
-
-    A directory is type 1 iff it was specified on a path statement
-    (either explicit or default) and the directory contains a
-    subdirectory with one of the known names and the directory name
-    does not end with "/kernel".  Otherwise it is type 2.
-
-    In a type 1 directory, walk the kernel subdirectory if it exists,
-    then the old known names in their historical order then any
-    remaining directory entries in alphabetical order and finally any
-    non-directory entries in alphabetical order.
-
-    Entries in a type 1 directory are filtered against the "prune"
-    list.  A type 1 directory can contain additional files which
-    are not modules nor symlinks to modules.  The prune list skips
-    known additional files, if a distribution wants to store
-    additional text files in the top level directory they should be
-    added to the prune list.
-
-    A type 2 directory must contain only modules or symlinks to
-    modules.  They are processed in alphabetical order, without
-    pruning.  Symlinks to directories are an error in type 2
-    directories.
-
-    The user function is not called for type 1 directories, nor for
-    pruned entries.  It is called for type 2 directories and their
-    contents.  It is also called for any files left in a type 1
-    directory after pruning and processing type 2 subdirectories.
-    The user function never sees symlinks, they are resolved before
-    calling the function.
-
-    Why have different directory types?  The original file tree
-    walk was not well defined.  Some users specified each directory
-    individually, others just pointed at the top level directory.
-    Either version worked until the "build" symlink was added.  Now
-    users who specify the top level directory end up running the
-    entire kernel source tree looking for modules, not nice.  We
-    cannot just ignore symlinks because pcmcia uses symlinks to
-    modules for backwards compatibility.
-
-    Type 1 is when a user specifies the top level directory which needs
-    special processing, type 2 is individual subdirectories.  But the
-    only way to tell the difference is by looking at the contents.  The
-    "/kernel" directory introduced in 2.3.12 either contains nothing
-    (old make modules_install) or contains all the kernel modules using
-    the same tree structure as the source.  Because "/kernel" can
-    contain old names but is really a type 2 directory, it is detected
-    as a special case.
- */
-
-#include <dirent.h>
-#include <errno.h>
-#include <limits.h>
-#include <malloc.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-
-#include "util.h"
-#include "config.h"
-
-extern char *tbpath[];
-
-extern OPT_LIST *prune_list;
-extern int n_prune_list;
-
-extern char *tbtype[];
-
-struct xftw_dirent {
-    struct stat statbuf;
-    char *name;
-    char *fullname;
-};
-
-#define XFTW_MAXDEPTH 64    /* Maximum directory depth handled */
-
-typedef struct {
-    struct xftw_dirent *contents;
-    int size;
-    int used;
-} xftw_tree_t;
-
-static xftw_tree_t tree[XFTW_MAXDEPTH];
-
-/* Free all data for one tree level */
-static void xftw_free_tree(int depth)
-{
-    int i;
-    xftw_tree_t *t = tree+depth;
-    for (i = 0; i < t->size; ++i) {
-	free(t->contents[i].name);
-	free(t->contents[i].fullname);
-    }
-    free(t->contents);
-    t->contents = NULL;
-    t->size = 0;
-    t->used = 0;
-}
-
-/* Increment dirents used at this depth, resizing if necessary */
-static void xftw_add_dirent(int depth)
-{
-    xftw_tree_t *t = tree+depth;
-    int i, size = t->size;
-    if (++t->used < size)
-	return;
-    size += 10; /* arbitrary increment */
-    t->contents = xrealloc(t->contents, size*sizeof(*(t->contents)));
-    for (i = t->size; i < size; ++i) {
-	memset(&(t->contents[i].statbuf), 0, sizeof(t->contents[i].statbuf));
-	t->contents[i].name = NULL;
-	t->contents[i].fullname = NULL;
-    }
-    t->size = size;
-}
-
-/* Concatenate directory name and entry name into one string.
- * Note: caller must free result or leak.
- */
-static char *xftw_dir_name(const char *directory, const char *entry)
-{
-    int i = strlen(directory);
-    char *name;
-    if (entry)
-	i += strlen(entry);
-    i += 2;
-    name = xmalloc(i);
-    strcpy(name, directory);	/* safe, xmalloc */
-    if (*directory && entry)
-	strcat(name, "/");	/* safe, xmalloc */
-    if (entry)
-	strcat(name, entry);	/* safe, xmalloc */
-    return(name);
-}
-
-/* Call the user function for a directory entry */
-static int xftw_do_name(const char *directory, const char *entry, struct stat *sb, xftw_func_t funcptr)
-{
-    int ret = 0;
-    char *name = xftw_dir_name(directory, entry);
-
-    if (S_ISLNK(sb->st_mode)) {
-	char real[PATH_MAX], *newname;
-	verbose("resolving %s symlink to ", name);
-	if (!(newname = realpath(name, real))) {
-	    if (errno == ENOENT) {
-		verbose("%s: does not exist, dangling symlink ignored\n", real);
-		goto cleanup;
-	    }
-	    perror("... failed");
-	    goto cleanup;
-	}
-	verbose("%s ", newname);
-	if (lstat(newname, sb)) {
-	    error("lstat on %s failed ", newname);
-	    perror("");
-	    goto cleanup;
-	}
-	free(name);
-	name = xstrdup(newname);
-    }
-
-    if (!S_ISREG(sb->st_mode) &&
-	!S_ISDIR(sb->st_mode)) {
-	error("%s is not plain file nor directory\n", name);
-	goto cleanup;
-    }
-	
-    verbose("user function %s\n", name);
-    ret = (*funcptr)(name, sb);
-cleanup:
-    free(name);
-    return(ret);
-}
-
-/* Sort directory entries into alphabetical order */
-static int xftw_sortdir(const void *a, const void *b)
-{
-    return(strcmp(((struct xftw_dirent *)a)->name, ((struct xftw_dirent *)b)->name));
-}
-
-/* Read a directory and sort it, ignoring "." and ".." */
-static int xftw_readdir(const char *directory, int depth)
-{
-    DIR *d;
-    struct dirent *ent;
-    verbose("xftw_readdir %s\n", directory);
-    if (!(d = opendir(directory))) {
-	perror(directory);
-	return(1);
-    }
-    while ((ent = readdir(d))) {
-	char *name;
-	struct xftw_dirent *f;
-	if (strcmp(ent->d_name, ".") == 0 ||
-	    strcmp(ent->d_name, "..") == 0)
-	    continue;
-	name = xftw_dir_name(directory, ent->d_name);
-	xftw_add_dirent(depth); 
-	f = tree[depth].contents+tree[depth].used-1;
-	f->name = xstrdup(ent->d_name);
-	f->fullname = name;     /* do not free name, it is in use */
-	if (lstat(name, &(f->statbuf))) {
-	    perror(name);
-	    return(1);
-	}
-    }
-    closedir(d);
-    qsort(tree[depth].contents, tree[depth].used, sizeof(*(tree[0].contents)), &xftw_sortdir);
-    return(0);
-}
-
-/* Process a type 2 directory */
-int xftw_type2(const char *directory, const char *entry, int depth, xftw_func_t funcptr)
-{
-    int ret, i;
-    xftw_tree_t *t = tree+depth;
-    struct stat statbuf;
-    char *dirname = xftw_dir_name(directory, entry);
-
-    verbose("type 2 %s\n", dirname);
-    if (depth > XFTW_MAXDEPTH) {
-	error("xftw_type2 exceeded maxdepth\n");
-	ret = 1;
-	goto cleanup;
-    }
-    if ((ret = xftw_readdir(dirname, depth)))
-	goto cleanup;
-
-    t = tree+depth;
-    /* user function sees type 2 directories */
-    if ((ret = lstat(dirname, &statbuf)) ||
-	(ret = xftw_do_name("", dirname, &statbuf, funcptr)))
-	goto cleanup;
-
-    /* user sees all contents of type 2 directory, no pruning */
-    for (i = 0; i < t->used; ++i) {
-	struct xftw_dirent *c = t->contents+i;
-	if (S_ISLNK(c->statbuf.st_mode)) {
-	    if (!stat(c->name, &(c->statbuf))) {
-		if (S_ISDIR(c->statbuf.st_mode)) {
-		    error("symlink to directory is not allowed, %s ignored\n", c->name);
-		    *(c->name) = '\0';  /* ignore it */
-		}
-	    }
-	}
-	if (!*(c->name))
-	    continue;
-	if (S_ISDIR(c->statbuf.st_mode)) {
-	    /* recursion is the curse of the programming classes */
-	    ret = xftw_type2(dirname, c->name, depth+1, funcptr);
-	    if (ret)
-		goto cleanup;
-	}
-	else if ((ret = xftw_do_name(dirname, c->name, &(c->statbuf), funcptr)))
-	    goto cleanup;
-	*(c->name) = '\0';  /* processed */
-    }
-
-    ret = 0;
-cleanup:
-    free(dirname);
-    return(ret);
-}
-
-/* Only external visible function.  Decide on the type of directory and
- * process accordingly.
- */
-int xftw(const char *directory, xftw_func_t funcptr)
-{
-    struct stat statbuf;
-    int ret, i, j, type;
-    xftw_tree_t *t;
-    struct xftw_dirent *c;
-
-    verbose("xftw starting at %s ", directory);
-    if (lstat(directory, &statbuf)) {
-	verbose("lstat on %s failed\n", directory);
-	return(0);
-    }
-    if (S_ISLNK(statbuf.st_mode)) {
-	char real[PATH_MAX];
-	verbose("resolving symlink to ");
-	if (!(directory = realpath(directory, real))) {
-	    if (errno == ENOENT) {
-		verbose("%s: does not exist, dangling symlink ignored\n", real);
-		return(0);
-	    }
-	    perror("... failed");
-	    return(-1);
-	}
-	verbose("%s ", directory);
-	if (lstat(directory, &statbuf)) {
-	    error("lstat on %s failed ", directory);
-	    perror("");
-	    return(-1);
-	}
-    }
-    if (!S_ISDIR(statbuf.st_mode)) {
-	error("%s is not a directory\n", directory);
-	return(-1);
-    }
-    verbose("\n");
-
-    /* All returns after this point must be via cleanup */
-
-    if ((ret = xftw_readdir(directory, 0)))
-	goto cleanup;
-
-    t = tree;   /* depth 0 */
-    type = 2;
-    for (i = 0 ; type == 2 && i < t->used; ++i) {
-	c = t->contents+i;
-	for (j = 0; tbtype[j]; ++j) {
-	    if (strcmp(c->name, tbtype[j]) == 0 &&
-		S_ISDIR(c->statbuf.st_mode)) {
-		const char *p = directory + strlen(directory) - 1;
-		if (*p == '/')
-		    --p;
-		if (p - directory >= 6 && strncmp(p-6, "/kernel", 7) == 0)
-		    continue;	/* "/kernel" path is a special case, type 2 */
-		type = 1;   /* known subdirectory */
-		break;
-	    }
-	}
-    }
-
-    if (type == 1) {
-	OPT_LIST *p;
-	/* prune entries in type 1 directories only */
-	for (i = 0 ; i < t->used; ++i) {
-	    for (p = prunelist; p->name; ++p) {
-		c = t->contents+i;
-		if (strcmp(p->name, c->name) == 0) {
-		    verbose("pruned %s\n", c->name);
-		    *(c->name) = '\0';  /* ignore */
-		}
-	    }
-	}
-	/* run known subdirectories first in historical order, "kernel" is now top of list */
-	for (i = 0 ; i < t->used; ++i) {
-	    c = t->contents+i;
-	    for (j = 0; tbtype[j]; ++j) {
-		if (*(c->name) &&
-		    strcmp(c->name, tbtype[j]) == 0 &&
-		    S_ISDIR(c->statbuf.st_mode)) {
-		    if ((ret = xftw_type2(directory, c->name, 1, funcptr)))
-			goto cleanup;
-		    *(c->name) = '\0';  /* processed */
-		}
-	    }
-	}
-	/* any other directories left, in alphabetical order */
-	for (i = 0 ; i < t->used; ++i) {
-	    c = t->contents+i;
-	    if (*(c->name) &&
-	        S_ISDIR(c->statbuf.st_mode)) {
-		if ((ret = xftw_type2(directory, c->name, 1, funcptr)))
-		    goto cleanup;
-		*(c->name) = '\0';  /* processed */
-	    }
-	}
-	/* anything else is passed to the user function */
-	for (i = 0 ; i < t->used; ++i) {
-	    c = t->contents+i;
-	    if (*(c->name)) {
-		verbose("%s found in type 1 directory %s\n", c->name, directory);
-		if ((ret = xftw_do_name(directory, c->name, &(c->statbuf), funcptr)))
-		    goto cleanup;
-		*(c->name) = '\0';  /* processed */
-	    }
-	}
-    }
-    else {
-	/* type 2 */
-	xftw_free_tree(0);
-	if ((ret = xftw_type2(directory, NULL, 0, funcptr)))
-	    goto cleanup;
-    }
-
-    /* amazing, it all worked */
-    ret = 0;
-cleanup:
-    for (i = 0; i < XFTW_MAXDEPTH; ++i)
-	xftw_free_tree(i);
-    return(ret);
-}
diff --git a/mdk-stage1/insmod-modutils/util/xmalloc.c b/mdk-stage1/insmod-modutils/util/xmalloc.c
deleted file mode 100644
index da0be2953..000000000
--- a/mdk-stage1/insmod-modutils/util/xmalloc.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Misc utility functions.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-void *
-xmalloc(size_t size)
-{
-  void *ptr = malloc(size ? size : 1);
-  if (!ptr)
-    {
-      error("Out of memory");
-      exit(1);
-    }
-  return ptr;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xrealloc.c b/mdk-stage1/insmod-modutils/util/xrealloc.c
deleted file mode 100644
index adc0558f1..000000000
--- a/mdk-stage1/insmod-modutils/util/xrealloc.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/* Misc utility functions.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-void *
-xrealloc(void *old, size_t size)
-{
-  void *ptr = realloc(old, size);
-  if (!ptr)
-    {
-      error("Out of memory");
-      exit(1);
-    }
-  return ptr;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xstrcat.c b/mdk-stage1/insmod-modutils/util/xstrcat.c
deleted file mode 100644
index ed4a2bf20..000000000
--- a/mdk-stage1/insmod-modutils/util/xstrcat.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Misc utility functions.
-   Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdlib.h>
-#include <string.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-char *
-xstrcat(char *dest, const char *src, size_t size)
-{
-  int ldest = strlen(dest);
-  int lsrc = strlen(src);
-  if ((size - ldest - 1) < lsrc) {
-    error("xstrcat: destination overflow");
-    exit(1);
-  }
-  memcpy(dest+ldest, src, lsrc+1);
-  return(dest);
-}
diff --git a/mdk-stage1/insmod-modutils/util/xstrdup.c b/mdk-stage1/insmod-modutils/util/xstrdup.c
deleted file mode 100644
index 46889a094..000000000
--- a/mdk-stage1/insmod-modutils/util/xstrdup.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Misc utility functions.
-   Copyright 1996, 1997 Linux International.
-   Contributed by Richard Henderson <rth@tamu.edu>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "util.h"
-
-
-/*======================================================================*/
-
-char *
-xstrdup(const char *s)
-{
-  char *n = strdup(s);
-  if (!n)
-    {
-      error("Out of memory");
-      exit(1);
-    }
-  return n;
-}
diff --git a/mdk-stage1/insmod-modutils/util/xsystem.c b/mdk-stage1/insmod-modutils/util/xsystem.c
deleted file mode 100644
index 8ffa490a9..000000000
--- a/mdk-stage1/insmod-modutils/util/xsystem.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Misc utility functions.
-   Copyright 2000 Keith Owens <kaos@ocs.com.au>
-
-   This file is part of the Linux modutils.
-
-   This program is free software; you can redistribute it and/or modify it
-   under the terms of the GNU General Public License as published by the
-   Free Software Foundation; either version 2 of the License, or (at your
-   option) any later version.
-
-   This program is distributed in the hope that it will be useful, but
-   WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software Foundation,
-   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <errno.h>
-#include <unistd.h>
-
-
-/*======================================================================*/
-
-/* Clone of the system() function From Steven's Advanced Programming in a Unix
- * Environment.  Modified to use *argv[] and execvp to avoid shell expansion
- * problems, modutils runs as root so system() is unsafe.
- */
-
-int
-xsystem(const char *file, char *const argv[])
-{
-  pid_t pid;
-  int status;
-  if ((pid = fork()) < 0)
-    return(-1);
-  if (pid == 0) {
-    execvp(file, argv);
-    _exit(127);
-  }
-  while (waitpid(pid, &status, 0) < 0) {
-    if (errno != EINTR)
-      return(-1);
-  }
-  return(status);
-}
diff --git a/mdk-stage1/insmod.h b/mdk-stage1/insmod.h
deleted file mode 100644
index 67a746858..000000000
--- a/mdk-stage1/insmod.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _INSMOD_INTERFACE_H_
-#define _INSMOD_INTERFACE_H_
-
-int insmod_call(char * full_filename, char * params);
-
-#endif
diff --git a/mdk-stage1/linux-2.2/nfs.h b/mdk-stage1/linux-2.2/nfs.h
deleted file mode 100644
index 7936d5a71..000000000
--- a/mdk-stage1/linux-2.2/nfs.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * NFS protocol definitions
- */
-#ifndef _LINUX_NFS_H
-#define _LINUX_NFS_H
-
-#include <linux/sunrpc/msg_prot.h>
-
-#define NFS_PORT	2049
-#define NFS_MAXDATA	8192
-#define NFS_MAXPATHLEN	1024
-#define NFS_MAXNAMLEN	255
-#define NFS_MAXGROUPS	16
-#define NFS_FHSIZE	32
-#define NFS_COOKIESIZE	4
-#define NFS_FIFO_DEV	(-1)
-#define NFSMODE_FMT	0170000
-#define NFSMODE_DIR	0040000
-#define NFSMODE_CHR	0020000
-#define NFSMODE_BLK	0060000
-#define NFSMODE_REG	0100000
-#define NFSMODE_LNK	0120000
-#define NFSMODE_SOCK	0140000
-#define NFSMODE_FIFO	0010000
-
-	
-enum nfs_stat {
-	NFS_OK = 0,
-	NFSERR_PERM = 1,
-	NFSERR_NOENT = 2,
-	NFSERR_IO = 5,
-	NFSERR_NXIO = 6,
-	NFSERR_EAGAIN = 11,
-	NFSERR_ACCES = 13,
-	NFSERR_EXIST = 17,
-	NFSERR_XDEV = 18,
-	NFSERR_NODEV = 19,
-	NFSERR_NOTDIR = 20,
-	NFSERR_ISDIR = 21,
-	NFSERR_INVAL = 22,	/* that Sun forgot */
-	NFSERR_FBIG = 27,
-	NFSERR_NOSPC = 28,
-	NFSERR_ROFS = 30,
-	NFSERR_OPNOTSUPP = 45,
-	NFSERR_NAMETOOLONG = 63,
-	NFSERR_NOTEMPTY = 66,
-	NFSERR_DQUOT = 69,
-	NFSERR_STALE = 70,
-	NFSERR_WFLUSH = 99
-};
-
-enum nfs_ftype {
-	NFNON = 0,
-	NFREG = 1,
-	NFDIR = 2,
-	NFBLK = 3,
-	NFCHR = 4,
-	NFLNK = 5,
-	NFSOCK = 6,
-	NFBAD = 7,
-	NFFIFO = 8
-};
-
-struct nfs_fh {
-	char			data[NFS_FHSIZE];
-};
-
-#define NFS_PROGRAM		100003
-#define NFS_VERSION		2
-#define NFSPROC_NULL		0
-#define NFSPROC_GETATTR		1
-#define NFSPROC_SETATTR		2
-#define NFSPROC_ROOT		3
-#define NFSPROC_LOOKUP		4
-#define NFSPROC_READLINK	5
-#define NFSPROC_READ		6
-#define NFSPROC_WRITECACHE	7
-#define NFSPROC_WRITE		8
-#define NFSPROC_CREATE		9
-#define NFSPROC_REMOVE		10
-#define NFSPROC_RENAME		11
-#define NFSPROC_LINK		12
-#define NFSPROC_SYMLINK		13
-#define NFSPROC_MKDIR		14
-#define NFSPROC_RMDIR		15
-#define NFSPROC_READDIR		16
-#define NFSPROC_STATFS		17
-
-/* Mount support for NFSroot */
-#ifdef __KERNEL__
-#define NFS_MNT_PROGRAM		100005
-#define NFS_MNT_VERSION		1
-#define NFS_MNT_PORT		627
-#define NFS_MNTPROC_MNT		1
-#define NFS_MNTPROC_UMNT	3
-#endif
-
-#if defined(__KERNEL__) || defined(NFS_NEED_KERNEL_TYPES)
-
-extern struct rpc_program	nfs_program;
-extern struct rpc_stat		nfs_rpcstat;
-
-struct nfs_time {
-	__u32			seconds;
-	__u32			useconds;
-};
-
-struct nfs_fattr {
-	enum nfs_ftype		type;
-	__u32			mode;
-	__u32			nlink;
-	__u32			uid;
-	__u32			gid;
-	__u32			size;
-	__u32			blocksize;
-	__u32			rdev;
-	__u32			blocks;
-	__u32			fsid;
-	__u32			fileid;
-	struct nfs_time		atime;
-	struct nfs_time		mtime;
-	struct nfs_time		ctime;
-};
-
-struct nfs_sattr {
-	__u32			mode;
-	__u32			uid;
-	__u32			gid;
-	__u32			size;
-	struct nfs_time		atime;
-	struct nfs_time		mtime;
-};
-
-struct nfs_fsinfo {
-	__u32			tsize;
-	__u32			bsize;
-	__u32			blocks;
-	__u32			bfree;
-	__u32			bavail;
-};
-
-struct nfs_writeargs {
-	struct nfs_fh *		fh;
-	__u32			offset;
-	__u32			count;
-	const void *		buffer;
-};
-
-#ifdef NFS_NEED_XDR_TYPES
-
-struct nfs_sattrargs {
-	struct nfs_fh *		fh;
-	struct nfs_sattr *	sattr;
-};
-
-struct nfs_diropargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-};
-
-struct nfs_readargs {
-	struct nfs_fh *		fh;
-	__u32			offset;
-	__u32			count;
-	void *			buffer;
-};
-
-struct nfs_createargs {
-	struct nfs_fh *		fh;
-	const char *		name;
-	struct nfs_sattr *	sattr;
-};
-
-struct nfs_renameargs {
-	struct nfs_fh *		fromfh;
-	const char *		fromname;
-	struct nfs_fh *		tofh;
-	const char *		toname;
-};
-
-struct nfs_linkargs {
-	struct nfs_fh *		fromfh;
-	struct nfs_fh *		tofh;
-	const char *		toname;
-};
-
-struct nfs_symlinkargs {
-	struct nfs_fh *		fromfh;
-	const char *		fromname;
-	const char *		topath;
-	struct nfs_sattr *	sattr;
-};
-
-struct nfs_readdirargs {
-	struct nfs_fh *		fh;
-	__u32			cookie;
-	void *			buffer;
-	unsigned int		bufsiz;
-};
-
-struct nfs_diropok {
-	struct nfs_fh *		fh;
-	struct nfs_fattr *	fattr;
-};
-
-struct nfs_readres {
-	struct nfs_fattr *	fattr;
-	unsigned int		count;
-};
-
-struct nfs_readlinkres {
-	char **			string;
-	unsigned int *		lenp;
-	unsigned int		maxlen;
-	void *			buffer;
-};
-
-struct nfs_readdirres {
-	void *			buffer;
-	unsigned int		bufsiz;
-};
-
-#endif /* NFS_NEED_XDR_TYPES */
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/mdk-stage1/linux-2.2/nfs_mount.h b/mdk-stage1/linux-2.2/nfs_mount.h
deleted file mode 100644
index 60493b150..000000000
--- a/mdk-stage1/linux-2.2/nfs_mount.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _LINUX_NFS_MOUNT_H
-#define _LINUX_NFS_MOUNT_H
-
-/*
- *  linux/include/linux/nfs_mount.h
- *
- *  Copyright (C) 1992  Rick Sladkey
- *
- *  structure passed from user-space to kernel-space during an nfs mount
- */
-
-/*
- * WARNING!  Do not delete or change the order of these fields.  If
- * a new field is required then add it to the end.  The version field
- * tracks which fields are present.  This will ensure some measure of
- * mount-to-kernel version compatibility.  Some of these aren't used yet
- * but here they are anyway.
- */
-#define NFS_MOUNT_VERSION	3
-
-struct nfs_mount_data {
-	int		version;		/* 1 */
-	int		fd;			/* 1 */
-	struct nfs_fh	root;			/* 1 */
-	int		flags;			/* 1 */
-	int		rsize;			/* 1 */
-	int		wsize;			/* 1 */
-	int		timeo;			/* 1 */
-	int		retrans;		/* 1 */
-	int		acregmin;		/* 1 */
-	int		acregmax;		/* 1 */
-	int		acdirmin;		/* 1 */
-	int		acdirmax;		/* 1 */
-	struct sockaddr_in addr;		/* 1 */
-	char		hostname[256];		/* 1 */
-	int		namlen;			/* 2 */
-	unsigned int	bsize;			/* 3 */
-};
-
-/* bits in the flags field */
-
-#define NFS_MOUNT_SOFT		0x0001	/* 1 */
-#define NFS_MOUNT_INTR		0x0002	/* 1 */
-#define NFS_MOUNT_SECURE	0x0004	/* 1 */
-#define NFS_MOUNT_POSIX		0x0008	/* 1 */
-#define NFS_MOUNT_NOCTO		0x0010	/* 1 */
-#define NFS_MOUNT_NOAC		0x0020	/* 1 */
-#define NFS_MOUNT_TCP		0x0040	/* 2 */
-#define NFS_MOUNT_VER3		0x0080	/* 3 */
-#define NFS_MOUNT_KERBEROS	0x0100	/* 3 */
-#define NFS_MOUNT_NONLM		0x0200	/* 3 */
- 
-#endif
diff --git a/mdk-stage1/log.c b/mdk-stage1/log.c
deleted file mode 100644
index c108a8f50..000000000
--- a/mdk-stage1/log.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <string.h>
-#include <time.h>
-#include <errno.h>
-#include "stage1.h"
-
-#include "log.h"
-
-static FILE * logtty  = NULL;
-static FILE * logfile = NULL;
-
-
-void vlog_message(const char * s, va_list args)
-{
-	va_list args_copy;
-	va_copy(args_copy, args);
-
-	if (logfile) {
-		fprintf(logfile, "* ");
-		vfprintf(logfile, s, args);
-		fprintf(logfile, "\n");
-		fflush(logfile);
-	}
-	if (logtty) {
-		fprintf(logtty, "* ");
-		vfprintf(logtty, s, args_copy);
-		fprintf(logtty, "\n");
-		fflush(logtty);
-	}
-
-	va_end(args_copy);
-}
-
-
-void log_message(const char * s, ...)
-{
-	va_list args;
-	va_start(args, s);
-	vlog_message(s, args);
-	va_end(args);
-	
-	return;
-}
-
-void log_perror(const char *msg)
-{
-	log_message("%s: %s", msg, strerror(errno));
-}
-
-
-void open_log(void)
-{
-	if (!IS_TESTING) {
-		logtty  = fopen("/dev/tty3", "w");
-		logfile = fopen(SLASH_LOCATION "/tmp/stage1.log", "w");
-	}
-	else
-		logfile = fopen("debug.log", "w");
-}
-
-void close_log(void)
-{
-	if (logfile) {
-		log_message("stage1: disconnecting life support systems");
-		fclose(logfile);
-		if (logtty)
-			fclose(logtty);
-	}
-}
diff --git a/mdk-stage1/log.h b/mdk-stage1/log.h
deleted file mode 100644
index 6a30fea8f..000000000
--- a/mdk-stage1/log.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-#ifndef _LOG_H_
-#define _LOG_H_
-
-#include <stdarg.h>
-
-void log_message(const char * s, ...) __attribute__ ((format (printf, 1, 2)));
-void vlog_message(const char * s, va_list args);
-void log_perror(const char *msg);
-void open_log(void);
-void close_log(void);
-
-#endif
diff --git a/mdk-stage1/lomount.c b/mdk-stage1/lomount.c
deleted file mode 100644
index e1142e4dd..000000000
--- a/mdk-stage1/lomount.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* This code comes from util-linux-2.10n (mount/lomount.c)
- * (this is a simplified version of this code)
- */
-
-#include <sys/types.h>
-#include <sys/mount.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-#include "stage1.h"
-#include "frontend.h"
-#include "log.h"
-#include "mount.h"
-#include "modules.h"
-
-#include "lomount.h"
-
-
-#define LO_NAME_SIZE	64
-#define LO_KEY_SIZE	32
-
-struct loop_info
-{
-	int		lo_number;	/* ioctl r/o */
-	dev_t		lo_device; 	/* ioctl r/o */
-	unsigned long	lo_inode; 	/* ioctl r/o */
-	dev_t		lo_rdevice; 	/* ioctl r/o */
-	int		lo_offset;
-	int		lo_encrypt_type;
-	int		lo_encrypt_key_size; 	/* ioctl w/o */
-	int		lo_flags;	/* ioctl r/o */
-	char		lo_name[LO_NAME_SIZE];
-	unsigned char	lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	unsigned long	lo_init[2];
-	char		reserved[4];
-};
-
-#define LOOP_SET_FD	0x4C00
-#define LOOP_CLR_FD	0x4C01
-#define LOOP_SET_STATUS	0x4C02
-#define LOOP_GET_STATUS	0x4C03
-
-int
-set_loop (const char *device, const char *file, int gz)
-{
-	struct loop_info loopinfo;
-	int fd, ffd, mode;
-
-	mode = O_RDONLY;
-
-	if ((ffd = open (file, mode)) < 0)
-		return 1;
-  
-	if ((fd = open (device, mode)) < 0) {
-		close(ffd);
-		return 1;
-	}
-
-	memset(&loopinfo, 0, sizeof (loopinfo));
-	strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
-	loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
-	loopinfo.lo_offset = 0;
-        if (gz) {
-                my_insmod("cryptoloop", ANY_DRIVER_TYPE, NULL, 1);
-                my_insmod("zlib_inflate", ANY_DRIVER_TYPE, NULL, 1);
-                my_insmod("gzloop", ANY_DRIVER_TYPE, NULL, 1);
-                loopinfo.lo_encrypt_type = 13; /* LO_CRYPT_GZ */
-        }
-
-#ifdef MCL_FUTURE  
-	/*
-	 * Oh-oh, sensitive data coming up. Better lock into memory to prevent
-	 * passwd etc being swapped out and left somewhere on disk.
-	 */
-  
-	  if(mlockall(MCL_CURRENT|MCL_FUTURE)) {
-		  log_message("CRITICAL Couldn't lock into memory! %s (memlock)", strerror(errno));
-		  return 1;
-	  }
-#endif
-
-	if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
-		close(fd);
-		close(ffd);
-		return 1;
-	}
-
-	if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
-		(void) ioctl (fd, LOOP_CLR_FD, 0);
-		close(fd);
-		close(ffd);
-		return 1;
-	}
-
-	close(fd);
-	close(ffd);
-	return 0;
-}
-
-
-char* find_free_loop()
-{
-	struct loop_info loopinfo;
-        int i;
-        for (i=0; i<256; i++) {
-                int fd;
-		char ldev[100];
-		sprintf(ldev, "/dev/loop%d", i);
-                ensure_dev_exists(ldev);
-                fd = open(ldev, O_RDONLY);
-                if (!ioctl(fd, LOOP_GET_STATUS, &loopinfo)) {
-                        close(fd);
-                        continue;
-                }
-                if (errno == ENXIO) {
-                        log_message("%s is available", ldev);
-                        close(fd);
-                        return strdup(ldev);
-                } else {
-                        log_perror("LOOP_GET_STATUS(unexpected error)");
-                        close(fd);
-                        continue;
-                }
-        }
-        return NULL;
-}
-
-void
-del_loop(char * loopdev)
-{
-	int fd;
-
-        if (!loopdev)
-                return;
-
-	if ((fd = open (loopdev, O_RDONLY)) < 0)
-		return;
-
-	if (ioctl (fd, LOOP_CLR_FD, 0) < 0)
-		return;
-  
-	close (fd);
-}
-
-int
-lomount(char *loopfile, char *where, char **dev, int gz)
-{
-  
-	long int flag;
-        char * loopdev;
-
-	flag = MS_MGC_VAL;
-	flag |= MS_RDONLY;
-
-	my_insmod("loop", ANY_DRIVER_TYPE, "max_loop=256", 1);
-
-        if (!(loopdev = find_free_loop())) {
-		log_message("could not find a free loop");
-		return 1;
-        }
-        if (dev)
-                *dev = loopdev;
-
-	if (set_loop(loopdev, loopfile, gz)) {
-		log_message("set_loop failed on %s (%s)", loopdev, strerror(errno));
-		return 1;
-	}
-  
-	if (my_mount(loopdev, where, "iso9660", 0)) {
-		del_loop(loopdev);
-		return 1;
-	}
-
-	log_message("lomount succeeded for %s on %s", loopfile, where);
-	return 0;
-}
-
-
diff --git a/mdk-stage1/lomount.h b/mdk-stage1/lomount.h
deleted file mode 100644
index 05ddd520b..000000000
--- a/mdk-stage1/lomount.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef LOMOUNT_H
-#define LOMOUNT_H
-
-int lomount(char *loopfile, char *where, char **loopdev, int gz);
-void del_loop(char *loopdev);
-
-#endif
diff --git a/mdk-stage1/mar/.cvsignore b/mdk-stage1/mar/.cvsignore
deleted file mode 100644
index bfde37886..000000000
--- a/mdk-stage1/mar/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-mar
diff --git a/mdk-stage1/mar/Makefile b/mdk-stage1/mar/Makefile
deleted file mode 100644
index 4271bb954..000000000
--- a/mdk-stage1/mar/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
- #******************************************************************************
- #
- #    mar - The Mandrake Archiver
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = libmar.a mar
-
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o libmar.a mar
-
-
-mar: mar-frontend.o mar-extract-only-standalone.o
-	gcc -o mar mar-frontend.o mar-extract-only-standalone.o -lbz2
-	$(STRIPCMD) $@
-
-libmar.a: mar-extract-only.o
-	ar -cru $@ $^
-	ranlib $@
-
-mar-extract-only.o: mar-extract-only.c mar-extract-only.h mar.h
-	$(DIET) gcc $(CFLAGS) $(INCLUDES) -c mar-extract-only.c
-
-mar-frontend.o: mar-frontend.c mar.h mar-extract-only.h
-	gcc $(CFLAGS) $(GLIBC_INCLUDES) -c mar-frontend.c
-
-mar-extract-only-standalone.o: mar-extract-only.c mar-extract-only.h mar.h
-	gcc $(CFLAGS) $(GLIBC_INCLUDES) -o $@ -D_STANDALONE_ -c mar-extract-only.c
diff --git a/mdk-stage1/mar/mar-extract-only.c b/mdk-stage1/mar/mar-extract-only.c
deleted file mode 100644
index dbc9c1bbc..000000000
--- a/mdk-stage1/mar/mar-extract-only.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * This code should suffice for stage1 on-the-fly uncompression of kernel modules.
- * (and it DOES perform tests and return values, blaaaah..)
- */
-
-#include "mar-extract-only.h"
-#include "mar.h"
-
-#ifdef _STANDALONE_
-void
-zerr(BZFILE * f) /* decrease code size */
-{
-	fprintf(stderr, BZ2_bzerror(f, &z_errnum));
-}
-
-inline void
-log_perror(char *msg)
-{
-	perror(msg);
-}
-void
-log_message(char *msg)
-{
-	fprintf(stderr, msg);
-}
-#else /* _STANDALONE_ */
-#include "../log.h"
-void
-zerr(BZFILE * f) /* decrease code size */
-{
-	log_message(BZ2_bzerror(f, &z_errnum));
-}
-#endif /* _STANDALONE_ */
-
-
-static int
-mar_open_file(char *filename, struct mar_stream *s)
-{
-	int end_filetable = 0;
-	struct mar_element * previous_element = NULL;
-
-	/* mar_zfile */
-	s->mar_zfile = BZ2_bzopen(filename, "rb");
-	if (!s->mar_zfile)
-	{
-		log_perror(filename);
-		return -1;
-	}
-
-	while (end_filetable == 0)
-	{
-		char buf[512];
-		int ptr = 0;
-		/* read filename */
-		do
-		{
-			if (BZ2_bzread(s->mar_zfile, &(buf[ptr]), sizeof(char)) != sizeof(char))
-			{
-				zerr(s->mar_zfile);
-				return -1;
-			}
-			ptr++;
-		} while ((buf[ptr-1] != 0) && (ptr < 512));
-		/* ptr == 1 when we arrive on the "char 0" of the end of the filetable */
-		if (ptr > 1)
-		{
-			struct mar_element * e = (struct mar_element *) malloc(sizeof(struct mar_element));
-			e->filename = strdup(buf);
-			/* read file_length */
-			if (BZ2_bzread(s->mar_zfile, &(e->file_length), sizeof(int)) != sizeof(int))
-			{
-				zerr(s->mar_zfile);
-				return -1;
-			}
-			/* read data_offset */
-			if (BZ2_bzread(s->mar_zfile, &(e->data_offset), sizeof(int)) != sizeof(int))
-			{
-				zerr(s->mar_zfile);
-				return -1;
-			}
-			/* write down chaining */
-			if (previous_element)
-				previous_element->next_element = e;
-			else
-				s->first_element = e;
-			previous_element = e;
-		}
-		else
-			end_filetable = 1;
-
-	}
-	/* chaining for last element */
-	previous_element->next_element = NULL;
-
-	return 0;
-}
-
-
-char **
-mar_list_contents(char * mar_filename)
-{
-	struct mar_stream s;
-	struct mar_element * elem;
-	char * tmp_contents[500];
-	char ** answ;
-	int i = 0;
-
-	if (mar_open_file(mar_filename, &s))
-		return NULL;
-
-	elem = s.first_element;
-	while (elem)
-	{
-		tmp_contents[i++] = strdup(elem->filename);
-		elem = elem->next_element;
-	}
-	tmp_contents[i++] = NULL;
-	answ = (char **) malloc(sizeof(char *) * i);
-	memcpy(answ, tmp_contents, sizeof(char *) * i);
-	return answ;
-}
-
-
-int
-mar_extract_file(char *mar_filename, char *filename_to_extract, char *dest_dir)
-{
-	struct mar_stream s;
-	struct mar_element * elem;
-
-	if (mar_open_file(mar_filename, &s))
-		return -1;
-
-	elem = s.first_element;
-	while (elem)
-	{
-		if (strcmp(elem->filename, filename_to_extract) == 0)
-		{
-			char garb_buf[4096];
-			char *buf;
-			char *dest_file;
-			int fd;
-			size_t i;
-			dest_file = (char *) alloca(strlen(dest_dir) + strlen(filename_to_extract) + 1);
-			strcpy(dest_file, dest_dir);
-			strcat(dest_file, filename_to_extract);
-			fd = creat(dest_file, 00660);
-			if (fd == -1)
-			{
-				log_perror(dest_file);
-				return -1;
-			}
-			buf = (char *) alloca(elem->file_length);
-			if (!buf)
-			{
-				log_perror(dest_file);
-				return -1;
-			}
-			i = elem->data_offset;
-			while (i > 0) {
-				int to_read = i > sizeof(garb_buf) ? sizeof(garb_buf) : i;
-				if (BZ2_bzread(s.mar_zfile, garb_buf, to_read) != to_read) {
-					log_message("MAR: unexpected EOF in stream");
-                                        close(fd);
-                                        unlink(dest_file);
-					return -1;
-				}
-				i -= to_read;
-			}
-			if (BZ2_bzread(s.mar_zfile, buf, elem->file_length) != elem->file_length)
-			{
-				zerr(s.mar_zfile);
-                                close(fd);
-                                unlink(dest_file);
-				return -1;
-			}
-			if (write(fd, buf, elem->file_length) != elem->file_length)
-			{
-				log_perror(dest_file);
-                                close(fd);
-                                unlink(dest_file);
-				return -1;
-			}
-			close(fd); /* do not check return value for code size */
-			BZ2_bzclose(s.mar_zfile);
-			return 0;
-		}
-		elem = elem->next_element;
-	}
-	BZ2_bzclose(s.mar_zfile);
-	return 1; /* 1 for file_not_found_in_archive */
-}
-
-
diff --git a/mdk-stage1/mar/mar-extract-only.h b/mdk-stage1/mar/mar-extract-only.h
deleted file mode 100644
index 715d75556..000000000
--- a/mdk-stage1/mar/mar-extract-only.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * Header for stage1 on-the-fly needs.
- */
-
-#ifndef MAR_EXTRACT_ONLY_H
-#define MAR_EXTRACT_ONLY_H
-
-int mar_extract_file(char *mar_filename, char *filename_to_extract, char *dest_dir);
-char ** mar_list_contents(char *mar_filename);
-
-#endif
diff --git a/mdk-stage1/mar/mar-frontend.c b/mdk-stage1/mar/mar-frontend.c
deleted file mode 100644
index cfffc34ae..000000000
--- a/mdk-stage1/mar/mar-frontend.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through zlib).
- *
- */
-
-/*
- * This code includes the extracting and creating features.
- *
- */
-
-#include "mar.h"
-#include "mar-extract-only.h"
-
-
-int
-file_size(char *filename)
-{
-	struct stat buf;
-	if (stat(filename, &buf) != 0)
-	{
-		perror(filename);
-		return -1;
-	}
-	return buf.st_size;
-}
-
-
-/* Yes I don't use the datastructure I directly write the final fileformat in memory then write down it.
- * Yes it's bad.
- */
-/* ``files'' is a NULL-terminated array of char* */
-
-char * fnf_tag = "FILE_NOT_FOUND&";
-
-int
-mar_create_file(char *dest_file, char **files)
-{
-	int filenum = 0;
-	int current_offset_filetable = 0;
-	int current_delta_rawdata = 0;
-	int filetable_size;
-	char * temp_marfile_buffer;
-	int total_length = 0;
-
-	filetable_size = sizeof(char); /* ``char 0'' */
-	while (files[filenum])
-	{
-		int fsiz = file_size(files[filenum]);
-		if (fsiz == -1)
-			files[filenum] = fnf_tag;
-		else {
-			filetable_size += 2*sizeof(int) /* file_length, data_offset */ + strlen(files[filenum]) + 1;
-			total_length += fsiz;
-		}
-		filenum++;
-	}
-
-	total_length += filetable_size;
-
-	temp_marfile_buffer = (char *) malloc(total_length); /* create the whole file in-memory (not with alloca! it can be bigger than typical limit for stack of programs (ulimit -s) */
-	DEBUG_MAR(printf("D: mar::create_marfile total-length %d\n", total_length););
-
-	filenum = 0;
-	while (files[filenum])
-	{
-		if (strcmp(files[filenum], fnf_tag)) {
-			FILE * f = fopen(files[filenum], "r");
-			int fsize;
-			if (!f)
-			{
-				perror(files[filenum]);
-				return -1;
-			}
-			
-			/* filename */
-			strcpy(&(temp_marfile_buffer[current_offset_filetable]), files[filenum]);
-			current_offset_filetable += strlen(files[filenum]) + 1;
-			
-			/* file_length */
-			fsize = file_size(files[filenum]);
-			if (fsize == -1) return -1;
-			memcpy(&temp_marfile_buffer[current_offset_filetable], &fsize, sizeof(int));
-			current_offset_filetable += sizeof(int);
-			
-			/* data_offset */
-			memcpy(&temp_marfile_buffer[current_offset_filetable], &current_delta_rawdata, sizeof(int));
-			current_offset_filetable += sizeof(int);
-			
-			/* data_raw_data */
-			if (fread(&temp_marfile_buffer[current_delta_rawdata + filetable_size], 1, fsize, f) != (size_t)fsize)
-			{
-				perror(files[filenum]);
-				return -1;
-			}
-			fclose(f);
-
-			current_delta_rawdata += fsize;
-		}
-
-		filenum++;
-	}
-
-	/* write down ``char 0'' to terminate file table */
-	memset(&temp_marfile_buffer[current_offset_filetable], 0, sizeof(char));
-
-	/* ok, buffer is ready, let's write it on-disk */
-	{
-		BZFILE * f = BZ2_bzopen(dest_file, "w9");
-		if (!f)
-		{
-			perror(dest_file);
-			return -1;
-		}
-		if (BZ2_bzwrite(f, temp_marfile_buffer, total_length) != total_length)
-		{
-			fprintf(stderr, BZ2_bzerror(f, &z_errnum));
-			return -1;
-		}
-		BZ2_bzclose(f);
-	}
-
-	printf("mar: created archive %s (%d files, length %d)\n", dest_file, filenum, total_length);
-	return 0;
-}
-
-
-void
-print_usage(char *progname)
-{
-	printf("Usage: %s [-lxc] [files..]\n", progname);
-	exit(0);
-}
-
-int
-main(int argc, char **argv)
-{
-	if (argc <= 2)
-		print_usage(argv[0]);
-	
-	if (argc >= 3)
-	{
-		if (strcmp(argv[1], "-l") == 0)
-		{
-			char ** contents = mar_list_contents(argv[2]);
-			if (contents)
-				while (contents && *contents) {
-					printf("\t%s\n", *contents);
-					contents++;
-				}
-			exit(0);
-		}
-		if ((strcmp(argv[1], "-x") == 0) && argc == 4)
-		{
-			int res = mar_extract_file(argv[2], argv[3], "./");
-			if (res == 1)
-				fprintf(stderr, "W: file-not-found-in-archive %s\n", argv[3]);
-			if (res == -1)
-				exit(-1);
-			exit(0);
-		}
-		if ((strcmp(argv[1], "-c") == 0) && argc >= 4)
-		{
-			char **files = (char **) alloca(((argc-3)+1) * sizeof(char *));
-			int i = 3;
-			while (i < argc)
-			{
-				files[i-3] = argv[i];
-				i++;
-			}
-			files[argc-3] = NULL;
-			{
-				int results;
-				results = mar_create_file(argv[2], files);
-				if (results != 0)
-					fprintf(stderr, "E: create-marfile-failed\n");
-				exit(results);
-			}
-					
-		}
-	}
-	
-	return 0;
-}
diff --git a/mdk-stage1/mar/mar.h b/mdk-stage1/mar/mar.h
deleted file mode 100644
index 61b50ca90..000000000
--- a/mdk-stage1/mar/mar.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * mar - The Mandrake Archiver
- *
- * An archiver that supports compression (through bzlib).
- *
- * Designed to be small so these bad designs are inside:
- *  . archive and compression are mixed together
- *  . create the mar file in-memory
- *  . does not free memory
- *
- */
-
-#ifndef MAR_H
-#define MAR_H
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <bzlib.h>
-
-/*
- * Format of a mar file:
- *
- * ASCIIZ filename         \           |
- * int file_length         | repeated  | bzipped
- * int pointer_in_archive  /           |
- * char 0                              |
- * raw_files_data                      /
- *
- */
-
-struct mar_element
-{
-	char * filename;             /* filename (ASCIIZ) of the element */
-	int file_length;             /* length (in bytes) of the raw data of the element */
-	int data_offset;             /* seek start of the raw data in the underlying mar stream */
-	struct mar_element * next_element;  /* pointer to the next element in the mar stream; NULL if last */
-};
-
-struct mar_stream
-{
-	struct mar_element * first_element;  /* pointer to the first element inside the mar stream */
-	BZFILE * mar_zfile;            /* associated zfile (opened) */
-};
-
-int z_errnum;
-
-#define DEBUG_MAR(x)
-
-#endif
diff --git a/mdk-stage1/minilibc.c b/mdk-stage1/minilibc.c
deleted file mode 100644
index 7388c527c..000000000
--- a/mdk-stage1/minilibc.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-#define MINILIBC_INTERNAL
-
-#include "minilibc.h"
-
-int atexit (void (*__func) (void) __attribute__ ((unused)))
-{
-	return 0;
-}
-
-void exit()
-{
-	_do_exit(0);
-	for (;;); /* Shut up gcc */
-}
-
-
-char ** _environ = NULL;
-int errno = 0;
-
-void _init (int __status __attribute__ ((unused)))
-{
-}
-
-void __libc_init_first (int __status __attribute__ ((unused)))
-{
-}
-
-void __libc_csu_fini(int __status __attribute__ ((unused)))
-{
-}
-
-void __libc_csu_init(int __status __attribute__ ((unused)))
-{
-}
-
-
-int __libc_start_main (int (*main) (int, char **, char **), int argc,
-		       char **argv, void (*init) (void) __attribute__ ((unused)), void (*fini) (void) __attribute__ ((unused)),
-		       void (*rtld_fini) (void) __attribute__ ((unused)), void *stack_end __attribute__ ((unused)))
-{
-	exit ((*main) (argc, argv, NULL));
-	/* never get here */
-	return 0;
-}
-
-void _fini (int __status __attribute__ ((unused)))
-{
-}
-
-#ifdef __x86_64__
-/* x86-64 implementation of signal() derived from glibc sources */
-
-static inline int sigemptyset(sigset_t *set) {
-  *set = 0;
-  return 0;
-}
-
-static inline int sigaddset(sigset_t *set, int sig) {
-  __asm__("btsq %1,%0" : "=m" (*set) : "Ir" (sig - 1L) : "cc");
-  return 0;
-}
-
-#define __NR___rt_sigaction __NR_rt_sigaction
-static inline _syscall3(int,__rt_sigaction,int,signum,const void *,act,void *,oldact)
-#define __NR___rt_sigreturn __NR_rt_sigreturn
-static _syscall1(int,__rt_sigreturn,unsigned long,unused)
-
-static void restore_rt(void) {
-  __rt_sigreturn(0);
-}
-
-int sigaction(int signum, const struct sigaction *act, struct sigaction *oldact) {
-  struct sigaction *newact = (struct sigaction *)act;
-  if (act) {
-	newact = __builtin_alloca(sizeof(*newact));
-	newact->sa_handler = act->sa_handler;
-	newact->sa_flags = act->sa_flags | SA_RESTORER;
-	newact->sa_restorer = &restore_rt;
-	newact->sa_mask = act->sa_mask;
-  }
-  return __rt_sigaction(signum, newact, oldact);
-}
-
-__sighandler_t signal(int signum, __sighandler_t action) {
-  struct sigaction sa,oa;
-  sa.sa_handler=action;
-  sigemptyset(&sa.sa_mask);
-  sigaddset(&sa.sa_mask,signum);
-  sa.sa_flags=SA_RESTART;
-  if (sigaction(signum,&sa,&oa))
-    return SIG_ERR;
-  return oa.sa_handler;
-}
-
-#endif
-
-#ifdef __NR_socketcall
-
-int socket(int a, int b, int c)
-{
-	unsigned long args[] = { a, b, c };
-	
-	return socketcall(SYS_SOCKET, args);
-}
-
-int bind(int a, void * b, int c)
-{
-	unsigned long args[] = { a, (long) b, c };
-	
-	return socketcall(SYS_BIND, args);
-}
-
-int listen(int a, int b)
-{
-	unsigned long args[] = { a, b, 0 };
-	
-	return socketcall(SYS_LISTEN, args);
-}
-
-int accept(int a, void * addr, void * addr2)
-{
-	unsigned long args[] = { a, (long) addr, (long) addr2 };
-	
-	return socketcall(SYS_ACCEPT, args);
-}
-
-#else
-
-_syscall3(int,socket,int,domain,int,type,int,protocol)
-_syscall3(int,bind,int,sockfd,void *,my_addr,int,addrlen)
-_syscall2(int,listen,int,s,int,backlog)
-_syscall3(int,accept,int,s,void *,addr,void *,addrlen)
-
-#endif
-
-
-void sleep(int secs)
-{
-	struct timeval tv;
-	
-	tv.tv_sec = secs;
-	tv.tv_usec = 0;
-	
-	select(0, NULL, NULL, NULL, &tv);
-}
-
-
-int strlen(const char * string)
-{
-	int i = 0;
-	
-	while (*string++) i++;
-	
-	return i;
-}
-
-char * strncpy(char * dst, const char * src, int len)
-{
-	char * chptr = dst;
-	int i = 0;
-	
-	while (*src && i < len) *dst++ = *src++, i++;
-	if (i < len) *dst = '\0';
-	
-	return chptr;
-}
-
-char * strcpy(char * dst, const char * src)
-{
-	char * chptr = dst;
-	
-	while (*src) *dst++ = *src++;
-	*dst = '\0';
-	
-	return chptr;
-}
-
-void * memcpy(void * dst, const void * src, size_t count)
-{
-	char * a = dst;
-	const char * b = src;
-	
-	while (count--)
-		*a++ = *b++;
-	
-	return dst;
-}
-
-
-int strcmp(const char * a, const char * b)
-{
-	int i, j;  
-	
-	i = strlen(a); j = strlen(b);
-	if (i < j)
-		return -1;
-	else if (j < i)
-	return 1;
-
-	while (*a && (*a == *b)) a++, b++;
-	
-	if (!*a) return 0;
-	
-	if (*a < *b)
-		return -1;
-	else
-		return 1;
-}
-
-int strncmp(const char * a, const char * b, int len)
-{
-	char buf1[1000], buf2[1000];
-	
-	strncpy(buf1, a, len);
-	strncpy(buf2, b, len);
-	buf1[len] = '\0';
-	buf2[len] = '\0';
-	
-	return strcmp(buf1, buf2);
-}
-
-char * strchr(char * str, int ch)
-{
-	char * chptr;
-	
-	chptr = str;
-	while (*chptr)
-	{
-		if (*chptr == ch) return chptr;
-		chptr++;
-	}
-
-	return NULL;
-}
-
-
-char * strstr(char *haystack, char *needle)
-{
-	char * tmp = haystack;
-	while ((tmp = strchr(tmp, needle[0])) != NULL) {
-		int i = 1;
-		while (i < strlen(tmp) && i < strlen(needle) && tmp[i] == needle[i])
-			i++;
-		if (needle[i] == '\0')
-			return tmp;
-		tmp++;
-	}
-	return NULL;
-}
-
-
-/* Minimum printf which handles only characters, %d's and %s's */
-void printf(char * fmt, ...)
-{
-	char buf[2048];
-	char * start = buf;
-	char * chptr = buf;
-	va_list args;
-	char * strarg;
-	int numarg;
-
-	strncpy(buf, fmt, sizeof(buf));
-	va_start(args, fmt);
-
-	while (start)
-	{
-		while (*chptr != '%' && *chptr) chptr++;
-		
-		if (*chptr == '%')
-		{
-			*chptr++ = '\0';
-			print_str_init(1, start);
-			
-			switch (*chptr++)
-			{
-			case 's': 
-				strarg = va_arg(args, char *);
-				print_str_init(1, strarg);
-				break;
-				
-			case 'd':
-				numarg = va_arg(args, int);
-				print_int_init(1, numarg);
-				break;
-			}
-			
-			start = chptr;
-		}
-		else
-		{
-			print_str_init(1, start);
-			start = NULL;
-		}
-	}
-}
diff --git a/mdk-stage1/minilibc.h b/mdk-stage1/minilibc.h
deleted file mode 100644
index e1d3e5b1f..000000000
--- a/mdk-stage1/minilibc.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-#include <stdarg.h>
-
-#define _LOOSE_KERNEL_NAMES 1
-
-#define NULL ((void *) 0)
-
-#define	WIFSTOPPED(status)	(((status) & 0xff) == 0x7f)
-#define	WIFSIGNALED(status)	(!WIFSTOPPED(status) && !WIFEXITED(status))
-#define	WEXITSTATUS(status)	(((status) & 0xff00) >> 8)
-#define	WTERMSIG(status)	((status) & 0x7f)
-#define	WSTOPSIG(status)	WEXITSTATUS(status)
-#define	WIFEXITED(status)	(WTERMSIG(status) == 0)
-
-#define MS_MGC_VAL 0xc0ed0000
-
-#define isspace(a) (a == ' ' || a == '\t')
-
-extern char ** _environ;
-
-extern int errno;
-
-/* Aieee, gcc 2.95+ creates a stub for posix_types.h on i386 which brings
-   glibc headers in and thus makes __FD_SET etc. not defined with 2.3+ kernels. */
-#define _FEATURES_H 1
-#include <linux/posix_types.h>
-#include <linux/socket.h>
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/if.h>
-#include <linux/un.h>
-#include <linux/loop.h>
-#include <linux/net.h>
-#include <asm/termios.h>
-#include <asm/ioctls.h>
-#include <asm/unistd.h>
-#include <asm/fcntl.h>
-#include <asm/signal.h>
-
-#ifndef __NR__newselect
-#define __NR__newselect __NR_select
-#endif
-
-#ifndef MINILIBC_INTERNAL
-static inline _syscall5(int,mount,const char *,spec,const char *,dir,const char *,type,unsigned long,rwflag,const void *,data);
-static inline _syscall5(int,_newselect,int,n,fd_set *,rd,fd_set *,wr,fd_set *,ex,struct timeval *,timeval);
-static inline _syscall4(int,wait4,pid_t,pid,int *,status,int,opts,void *,rusage)
-static inline _syscall3(int,write,int,fd,const char *,buf,unsigned long,count)
-static inline _syscall3(int,reboot,int,magic,int,magic_too,int,flag)
-static inline _syscall3(int,execve,const char *,fn,void *,argv,void *,envp)
-static inline _syscall3(int,read,int,fd,const char *,buf,unsigned long,count)
-static inline _syscall3(int,open,const char *,fn,int,flags,mode_t,mode)
-static inline _syscall3(int,ioctl,int,fd,int,request,void *,argp)
-static inline _syscall2(int,dup2,int,one,int,two)
-static inline _syscall2(int,kill,pid_t,pid,int,sig)
-static inline _syscall2(int,symlink,const char *,a,const char *,b)
-static inline _syscall2(int,chmod,const char * ,path,mode_t,mode)
-static inline _syscall2(int,sethostname,const char *,name,int,len)
-static inline _syscall2(int,setdomainname,const char *,name,int,len)
-static inline _syscall2(int,setpgid,int,name,int,len)
-static inline _syscall2(int,mkdir,const char *,pathname,mode_t,mode)
-#ifdef __x86_64__
-extern __sighandler_t signal(int signum, __sighandler_t handler);
-#else
-static inline _syscall2(int,signal,int,num,void *,len)
-#endif
-#ifdef __NR_umount
-static inline _syscall1(int,umount,const char *,dir)
-#else
-static inline _syscall2(int,umount2,const char *,dir,int,flags)
-static inline int umount(const char * dir) { return umount2(dir, 0); }
-#endif
-static inline _syscall1(int,unlink,const char *,fn)
-static inline _syscall1(int,close,int,fd)
-static inline _syscall1(int,swapoff,const char *,fn)
-static inline _syscall0(int,getpid)
-static inline _syscall0(int,sync)
-#ifdef __sparc__
-/* Nonstandard fork calling convention :( */
-static inline int fork(void) {
-  int __res;
-  __asm__ __volatile__ (
-    "mov %0, %%g1\n\t"
-    "t 0x10\n\t"
-    "bcc 1f\n\t"
-    "dec %%o1\n\t"
-    "sethi %%hi(%2), %%g1\n\t"
-    "st %%o0, [%%g1 + %%lo(%2)]\n\t"
-    "b 2f\n\t"
-    "mov -1, %0\n\t"
-    "1:\n\t"
-    "and %%o0, %%o1, %0\n\t"
-    "2:\n\t"
-    : "=r" (__res)
-    : "0" (__NR_fork), "i" (&errno)
-    : "g1", "o0", "cc");
-  return __res;
-}
-#else
-static inline _syscall0(int,fork)
-#endif
-static inline _syscall0(pid_t,setsid)
-static inline _syscall3(int,syslog,int, type, char *, buf, int, len);
-#else
-static inline _syscall5(int,_newselect,int,n,fd_set *,rd,fd_set *,wr,fd_set *,ex,struct timeval *,timeval);
-static inline _syscall3(int,write,int,fd,const char *,buf,unsigned long,count)
-#ifdef __NR_socketcall
-static inline _syscall2(int,socketcall,int,code,unsigned long *, args)
-#endif
-#define __NR__do_exit __NR_exit
-static inline _syscall1(int,_do_exit,int,exitcode)
-#endif
-
-#define select _newselect
-
-extern int errno;
-
-int socket(int a, int b, int c);
-int bind(int a, void * b, int c);
-int listen(int a, int b);
-int accept(int a, void * addr, void * addr2);
-
-void sleep(int secs);
-
-int strlen(const char * string);
-char * strcpy(char * dst, const char * src);
-void * memcpy(void * dst, const void * src, size_t count);
-int strcmp(const char * a, const char * b);
-int strncmp(const char * a, const char * b, int len);
-char * strchr(char * str, int ch);
-char * strstr(char *haystack, char *needle);
-char * strncpy(char * dst, const char * src, int len);
-
-void print_str_init(int fd, char * string);
-void print_int_init(int fd, int i);
-/* Minimum printf which handles only characters, %d's and %s's */
-void printf(char * fmt, ...) __attribute__ ((format (printf, 1, 2)));
-
diff --git a/mdk-stage1/mkinitrd_helper/Makefile b/mdk-stage1/mkinitrd_helper/Makefile
deleted file mode 100644
index 269fd3ddc..000000000
--- a/mdk-stage1/mkinitrd_helper/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-VERSION = 1.1.1
-
-DEFS = -DVERSION=\"$(VERSION)\"
-
-
-MKINITRD_HELPER_SRC = mkinitrd_helper.c
-MKINITRD_HELPER_LIBS = ../insmod-busybox/libinsmod-DIET.a
-
-MKINITRD_HELPER_OBJS = $(subst .c,.o,$(MKINITRD_HELPER_SRC))
-
-BIN = mkinitrd_helper 
-
-all: $(BIN)
-
-clean:
-	rm -f *.o $(BIN)
-
-FLAGS = -Wall -Werror -Os -fomit-frame-pointer -c
-
-
-$(MKINITRD_HELPER_OBJS): %.o: %.c
-	$(CC) $(DEFS) $(DIETLIBC_INCLUDES) -I.. -c $< -o $@
-
-mkinitrd_helper: $(MKINITRD_HELPER_OBJS) $(MKINITRD_HELPER_LIBS) $(DIETLIBC_LIBC)
-	$(CC) $(DIETLIBC_LDFLAGS_STAGE1) -o $@ $^
-	$(STRIPCMD) $@
diff --git a/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c b/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c
deleted file mode 100644
index 3e47bca2d..000000000
--- a/mdk-stage1/mkinitrd_helper/mkinitrd_helper.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 Mandrakesoft
- *
- * This software is covered by the GPL license.
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * This little program replaces usual sash and insmod.static based script
- * from mkinitrd (that insmod modules, plus possibly mount a partition and
- * losetup a loopback-based / on the partition).
- *
- *
- * On my machine:
- *   gzipped sash + insmod.static         502491 bytes
- *   gzipped <this-program>                14243 bytes
- *
- * There will be room for linux-2.4 and many modules, now. Cool.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/mount.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/ioctl.h>
-#include <signal.h>
-
-#include "insmod.h"
-
-int quiet = 0;
-
-void vlog_message(const char * s, va_list args)
-{
-	vprintf(s, args);
-	printf("\n");
-}
-
-void log_perror(char *msg)
-{
-	perror(msg);
-}
-
-
-static void fatal_error(char *msg)
-{
-	printf("[] E: %s\n[] giving hand to kernel.\n", msg);
-        exit(-1);
-}
-
-static void warning(char *msg)
-{
-	printf("[] W: %s\n", msg);
-}
-
-static void parse_parms(const char * parm, char ** parm1, char ** parm2, char ** parm3)
-{
-	char * ptr;
-	
-	ptr = strchr(parm, '\n');
-	if (!ptr)
-		fatal_error("bad config file: no newline after parms");
-
-	*parm1 = malloc(ptr-parm+1); /* yup, never freed :-) */
-	memcpy(*parm1, parm, ptr-parm);
-	(*parm1)[ptr-parm] = '\0';
-
-	if (!parm2)
-		return;
-
-	*parm2 = strchr(*parm1, ' ');
-	if (!*parm2)
-		return;
-	**parm2 = '\0';
-	(*parm2)++;
-
-	if (!parm3)
-		return;
-
-	*parm3 = strchr(*parm2, ' ');
-	if (!*parm3)
-		return;
-	**parm3 = '\0';
-	(*parm3)++;
-}
-
-
-static void insmod_(const char * parm)
-{
-	char * mod_name, * options;
-
-	parse_parms(parm, &mod_name, &options, NULL);
-
-#ifdef DEBUG
-	printf("insmod %s options %s\n", mod_name, options);
-#endif
-	if (!quiet)
-		printf("[] Loading module %s\n", mod_name);
-
-	if (insmod_call(mod_name, options))
-		perror("insmod failed");
-}
-
-
-static void mount_(const char * parm)
-{
-	char * dev, * location, * fs;
-	unsigned long flags;
-	char * opts = NULL;
-
-	parse_parms(parm, &dev, &location, &fs);
-
-#ifdef DEBUG
-	printf("mounting %s on %s as type %s\n", dev, location, fs);
-#endif
-	if (!quiet)
-		printf("[] Mounting device containing loopback root filesystem\n");
-
-	flags = MS_MGC_VAL;
-
-	if (!strcmp(fs, "vfat"))
-		opts = "check=relaxed";
-
-	if (mount(dev, location, fs, flags, opts))
-		perror("mount failed");
-}
-
-
-#define LO_NAME_SIZE	64
-#define LO_KEY_SIZE	32
-
-struct loop_info
-{
-	int		lo_number;	/* ioctl r/o */
-	dev_t		lo_device; 	/* ioctl r/o */
-	unsigned long	lo_inode; 	/* ioctl r/o */
-	dev_t		lo_rdevice; 	/* ioctl r/o */
-	int		lo_offset;
-	int		lo_encrypt_type;
-	int		lo_encrypt_key_size; 	/* ioctl w/o */
-	int		lo_flags;	/* ioctl r/o */
-	char		lo_name[LO_NAME_SIZE];
-	unsigned char	lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */
-	unsigned long	lo_init[2];
-	char		reserved[4];
-};
-
-#define LOOP_SET_FD	0x4C00
-#define LOOP_CLR_FD	0x4C01
-#define LOOP_SET_STATUS	0x4C02
-
-static void set_loop_(const char * parm)
-{
-	struct loop_info loopinfo;
-	int fd, ffd;
-	char * device, * file;
-
-	parse_parms(parm, &device, &file, NULL);
-
-#ifdef DEBUG
-	printf("set_looping %s with %s\n", device, file);
-#endif
-	if (!quiet)
-		printf("[] Setting up loopback file %s\n", file);
-
-	if ((ffd = open(file, O_RDWR)) < 0) {
-		perror("set_loop, opening file in rw");
-		exit(-1);
-	}
-  
-	if ((fd = open(device, O_RDWR)) < 0) {
-		perror("set_loop, opening loop device in rw");
-		close(ffd);
-		exit(-1);
-	}
-
-	memset(&loopinfo, 0, sizeof (loopinfo));
-	strncpy(loopinfo.lo_name, file, LO_NAME_SIZE);
-	loopinfo.lo_name[LO_NAME_SIZE - 1] = 0;
-	loopinfo.lo_offset = 0;
-
-	if (ioctl(fd, LOOP_SET_FD, ffd) < 0) {
-		close(fd);
-		close(ffd);
-		perror("LOOP_SET_FD");
-		exit(-1);
-	}
-
-	if (ioctl(fd, LOOP_SET_STATUS, &loopinfo) < 0) {
-		(void) ioctl (fd, LOOP_CLR_FD, 0);
-		close(fd);
-		close(ffd);
-		perror("LOOP_SET_STATUS");
-		exit(-1);
-	}
-
-	close(fd);
-	close(ffd);
-}
-
-
-#define MD_MAJOR 9
-#define RAID_AUTORUN           _IO (MD_MAJOR, 0x14)
-#include <linux/raid/md_u.h>
-
-static void raidautorun_(const char * parm)
-{
-	char * device;
-	int fd;
-
-	parse_parms(parm, &device, NULL, NULL);
-
-	if (!quiet)
-		printf("[] Calling raid autorun for %s\n", device);
-	
-	fd = open(device, O_RDWR, 0);
-	if (fd < 0) {
-		printf("raidautorun: failed to open %s: %d\n", device, errno);
-		return;
-	}
-	
-	if (ioctl(fd, RAID_AUTORUN, 0)) {
-		printf("raidautorun: RAID_AUTORUN failed: %d\n", errno);
-	}
-	
-	close(fd);
-}
-
-static int handle_command(char ** ptr, char * cmd_name, void (*cmd_func)(const char * parm))
-{
-	if (!strncmp(*ptr, cmd_name, strlen(cmd_name))) {
-		*ptr = strchr(*ptr, '\n');
-		if (!*ptr)
-			fatal_error("Bad config file: no newline after command");
-		(*ptr)++;
-		cmd_func(*ptr);
-		*ptr = strchr(*ptr, '\n');
-		if (!*ptr)
-			exit(0);
-		(*ptr)++;
-		return 1;
-	}
-	return 0;
-}
-
-
-int main(int argc, char **argv)
-{
-	int fd_conf, i;
-	char buf[5000];
-	char * ptr;
-
-	if (strstr(argv[0], "modprobe"))
-		exit(0);
-
-	if (mount("/proc", "/loopfs", "proc", 0, NULL))
-		printf("[] couldn't mount proc filesystem\n");
-	else {
-		int fd_cmdline = open("/loopfs/cmdline", O_RDONLY);
-		if (fd_cmdline > 0) {
-			i = read(fd_cmdline, buf, sizeof(buf));
-			if (i == -1)
-				warning("could not read cmdline");
-			else {
-				buf[i] = '\0';
-				if (strstr(buf, "quiet"))
-					quiet = 1;
-			}
-			close(fd_cmdline);
-		}
-		umount("/loopfs");
-	}
-
-	if (!quiet)
-		printf("[] initrd_helper v" VERSION "\n");
-
-	if ((fd_conf = open("/mkinitrd_helper.conf", O_RDONLY)) < 0)
-		fatal_error("could not open mkinitrd_helper config file");
-	
-	i = read(fd_conf, buf, sizeof(buf));
-	if (i == -1)
-		fatal_error("could not read mkinitrd_helper config file");
-	buf[i] = '\0';
-	close(fd_conf);
-
-	ptr = buf;
-
-	while (*ptr)
-		if (!(handle_command(&ptr, "insmod", insmod_) +
-		      handle_command(&ptr, "mount", mount_) +
-		      handle_command(&ptr, "raidautorun", raidautorun_) +
-		      handle_command(&ptr, "set_loop", set_loop_)))
-			warning("unkown command (trying to continue)");
-
-	return 0;
-}
diff --git a/mdk-stage1/modules.c b/mdk-stage1/modules.c
deleted file mode 100644
index 11e118030..000000000
--- a/mdk-stage1/modules.c
+++ /dev/null
@@ -1,558 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * (1) calculate dependencies
- * (2) unarchive relevant modules
- * (3) insmod them
- */
-
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <errno.h>
-#include "insmod.h"
-#include "stage1.h"
-#include "log.h"
-#include "mar/mar-extract-only.h"
-#include "frontend.h"
-#include "mount.h"
-#include "modules_descr.h"
-
-#include "modules.h"
-
-static struct module_deps_elem * modules_deps = NULL;
-
-static char archive_name[] = "/modules/modules.mar";
-static char additional_archive_name[] = "/tmp/tmpfs/modules.mar";
-int allow_additional_modules_floppy = 1;
-
-extern long init_module(void *, unsigned long, const char *);
-
-
-static const char *moderror(int err)
-{
-	switch (err) {
-	case ENOEXEC:
-		return "Invalid module format";
-	case ENOENT:
-		return "Unknown symbol in module";
-	case ESRCH:
-		return "Module has wrong symbol version";
-	case EINVAL:
-		return "Invalid parameters";
-	default:
-		return strerror(err);
-	}
-}
-
-static void *grab_file(const char *filename, unsigned long *size)
-{
-	unsigned int max = 16384;
-	int ret, fd;
-	void *buffer = malloc(max);
-
-        fd = open(filename, O_RDONLY, 0);
-	if (fd < 0)
-		return NULL;
-
-	*size = 0;
-	while ((ret = read(fd, buffer + *size, max - *size)) > 0) {
-		*size += ret;
-		if (*size == max)
-			buffer = realloc(buffer, max *= 2);
-	}
-	if (ret < 0) {
-		free(buffer);
-		buffer = NULL;
-	}
-	close(fd);
-	return buffer;
-}
-
-static enum return_type ensure_additional_modules_available(void)
-{
-#ifdef ENABLE_ADDITIONAL_MODULES
-        struct stat statbuf;
-        if (stat(additional_archive_name, &statbuf)) {
-                char floppy_mount_location[] = "/tmp/floppy";
-                char floppy_modules_mar[] = "/tmp/floppy/modules.mar";
-                int ret;
-                int automatic = 0;
-
-                if (stat("/tmp/tmpfs", &statbuf)) {
-                        if (scall(mkdir("/tmp/tmpfs", 0755), "mkdir"))
-                                return RETURN_ERROR;
-                        if (scall(mount("none", "/tmp/tmpfs", "tmpfs", MS_MGC_VAL, NULL), "mount tmpfs"))
-                                return RETURN_ERROR;
-                }
-                
-                if (IS_AUTOMATIC) {
-                        unset_automatic();
-                        automatic = 1;
-                }
-          
-        retry:
-                stg1_info_message("Please insert the Additional Drivers floppy.");;
-
-                while (my_mount(floppy_device(), floppy_mount_location, "ext2", 0) == -1) {
-                        enum return_type results = ask_yes_no(errno == ENXIO ?
-                                                              "There is no detected floppy drive, or no floppy disk in drive.\nRetry?"
-                                                              : errno == EINVAL ?
-                                                              "Floppy is not a Linux ext2 floppy in first floppy drive.\nRetry?"
-                                                              : "Can't find a linux ext2 floppy in first floppy drive.\nRetry?");
-                        if (results != RETURN_OK) {
-                                allow_additional_modules_floppy = 0;
-                                if (automatic)
-                                        set_param(MODE_AUTOMATIC);
-                                return results;
-                        }
-                }
-                                
-                if (stat(floppy_modules_mar, &statbuf)) {
-                        stg1_error_message("This is not an Additional Drivers floppy, as far as I can see.");
-                        umount(floppy_mount_location);
-                        goto retry;
-                }
-
-                init_progression("Copying...", file_size(floppy_modules_mar));
-                ret = copy_file(floppy_modules_mar, additional_archive_name, update_progression);
-                end_progression();
-                umount(floppy_mount_location);
-                if (automatic)
-                        set_param(MODE_AUTOMATIC);
-                return ret;
-        } else
-                return RETURN_OK;
-#else
-	allow_additional_modules_floppy = 0;
-	return RETURN_ERROR;
-#endif
-}
-
-int insmod_local_file(char * path, char * options)
-{
-        if (kernel_version() <= 4) {
-                return insmod_call(path, options);
-        } else {
-                void *file;
-                unsigned long len;
-                int rc;
-                
-                file = grab_file(path, &len);
-                
-                if (!file) {
-                        log_perror(asprintf_("\terror reading %s", path));
-                        return -1;
-                }
-                
-                rc = init_module(file, len, options ? options : "");
-                if (rc)
-                        log_message("\terror: %s", moderror(errno));
-                return rc;
-        }
-}
-
-static char *kernel_module_extension(void)
-{
-  return kernel_version() <= 4 ? ".o" : ".ko";
-}
-
-/* unarchive and insmod given module
- * WARNING: module must not contain the trailing ".o"
- */
-static enum insmod_return insmod_archived_file(const char * mod_name, char * options, int allow_modules_floppy)
-{
-	char module_name[50];
-	char final_name[50] = "/tmp/";
-	int i, rc;
-
-	strncpy(module_name, mod_name, sizeof(module_name));
-	strcat(module_name, kernel_module_extension());
-	i = mar_extract_file(archive_name, module_name, "/tmp/");
-	if (i == 1) {
-                static int recurse = 0;
-                if (allow_additional_modules_floppy && allow_modules_floppy && !recurse) {
-                        recurse = 1;
-                        if (ensure_additional_modules_available() == RETURN_OK)
-                                i = mar_extract_file(additional_archive_name, module_name, "/tmp/");
-                        recurse = 0;
-                }
-        }
-        if (i == 1) {
-                log_message("file-not-found-in-archive %s (maybe you can try another boot floppy such as 'hdcdrom_usb.img')", module_name);
-                return INSMOD_FAILED_FILE_NOT_FOUND;
-        }
-	if (i != 0)
-		return INSMOD_FAILED;
-
-	strcat(final_name, module_name);
-
-        rc = insmod_local_file(final_name, options);
-
-	unlink(final_name); /* sucking no space left on device */
-
-	if (rc) {
-		log_message("\tfailed");
-		return INSMOD_FAILED;
-	}
-	return INSMOD_OK;
-}
-
-
-
-static int load_modules_dependencies(void)
-{
-	char * deps_file = "/modules/modules.dep";
-	char * buf, * ptr, * start, * end;
-	struct stat s;
-	int fd, line, i;
-
-	log_message("loading modules dependencies");
-
-	if (IS_TESTING)
-		return 0;
-
-	fd = open(deps_file, O_RDONLY);
-	if (fd == -1) {
-		log_perror(deps_file);
-		return -1;
-	}
-	
-	fstat(fd, &s);
-	buf = alloca(s.st_size + 1);
-	if (read(fd, buf, s.st_size) != (ssize_t)s.st_size) {
-		log_perror(deps_file);
-		return -1;
-	}
-	buf[s.st_size] = '\0';
-	close(fd);
-
-	ptr = buf;
-	line = 0;
-	while (ptr) {
-		line++;
-		ptr = strchr(ptr + 1, '\n');
-	}
-
-	modules_deps = malloc(sizeof(*modules_deps) * (line+1));
-
-	start = buf;
-	line = 0;
-	while (start < (buf+s.st_size) && *start) {
-		char * tmp_deps[50];
-
-		end = strchr(start, '\n');
-		*end = '\0';
-
-		ptr = strchr(start, ':');
-		if (!ptr) {
-			start = end + 1;
-			continue;
-		}
-		*ptr = '\0';
-		ptr++;
-
-		while (*ptr && (*ptr == ' ')) ptr++;
-		if (!*ptr) {
-			start = end + 1;
-			continue;
-		}
-
-		/* sort of a good line */
-		modules_deps[line].name = strdup(start);
-
-		start = ptr;
-		i = 0;
-		while (start && *start) {
-			ptr = strchr(start, ' ');
-			if (ptr) *ptr = '\0';
-			tmp_deps[i++] = strdup(start);
-			if (ptr)
-				start = ptr + 1;
-			else
-				start = NULL;
-			while (start && *start && *start == ' ')
-				start++;
-		}
-		tmp_deps[i++] = NULL;
-
-		modules_deps[line].deps = memdup(tmp_deps, sizeof(char *) * i);
-
-		line++;
-		start = end + 1;
-	}
-	modules_deps[line].name = NULL;
-
-	return 0;
-}
-
-
-void init_modules_insmoding(void)
-{
-	if (load_modules_dependencies()) {
-		fatal_error("warning, error initing modules stuff, modules loading disabled");
-	}
-}
-
-
-static void add_modules_conf(char * str)
-{
-	static char data[5000] = "";
-	char * target = "/tmp/modules.conf";
-	int fd;
-
-	if (strlen(data) + strlen(str) >= sizeof(data))
-		return;
-
-	strcat(data, str);
-	strcat(data, "\n");
-
-	fd = open(target, O_CREAT|O_WRONLY|O_TRUNC, 00660);
-	
-	if (fd == -1) {
-		log_perror(str);
-		return;
-	}
-
-	if (write(fd, data, strlen(data) + 1) != (ssize_t) (strlen(data) + 1))
-		log_perror(str);
-
-	close(fd);
-}
-
-
-int module_already_present(const char * name)
-{
-	FILE * f;
-	int answ = 0;
-
-	if ((f = fopen("/proc/modules", "rb"))) {
-                while (1) {
-                        char buf[500];
-                        if (!fgets(buf, sizeof(buf), f)) break;
-                        if (!strncmp(name, buf, strlen(name)) && buf[strlen(name)] == ' ')
-                                answ = 1;
-                }
-                fclose(f);
-        }
-	return answ;
-}
-
-
-static enum insmod_return insmod_with_deps(const char * mod_name, char * options, int allow_modules_floppy)
-{
-	struct module_deps_elem * dep;
-
-	dep = modules_deps;
-	while (dep && dep->name && strcmp(dep->name, mod_name)) dep++;
-
-	if (dep && dep->name && dep->deps) {
-		char ** one_dep;
-		one_dep = dep->deps;
-		while (*one_dep) {
-			/* here, we can fail but we don't care, if the error is
-			 * important, the desired module will fail also */
-			insmod_with_deps(*one_dep, NULL, allow_modules_floppy);
-			one_dep++;
-		}
-	}
-
-	if (module_already_present(mod_name))
-		return INSMOD_OK;
-
-	log_message("needs %s", mod_name);
-	{
-		char *file = asprintf_("/modules/%s%s", mod_name, kernel_module_extension());
-		if (access(file, R_OK) == 0)
-			return insmod_local_file(file, options);
-		else
-			return insmod_archived_file(mod_name, options, allow_modules_floppy);
-	}
-}
-
-
-static const char * get_name_kernel_26_transition(const char * name)
-{
-	struct kernel_24_26_mapping {
-		const char * name_24;
-		const char * name_26;
-	};
-	static struct kernel_24_26_mapping mappings[] = {
-                { "usb-ohci", "ohci-hcd" },
-                { "usb-uhci", "uhci-hcd" },
-                { "uhci", "uhci-hcd" },
-//                { "printer", "usblp" },
-                { "bcm4400", "b44" },
-                { "3c559", "3c359" },
-                { "3c90x", "3c59x" },
-                { "dc395x_trm", "dc395x" },
-//                { "audigy", "snd-emu10k1" },
-        };
-	int mappings_nb = sizeof(mappings) / sizeof(struct kernel_24_26_mapping);
-        int i;
-
-        /* pcitable contains 2.4 names. this will need to change if/when it contains 2.6 names! */
-        if (kernel_version() > 4)
-                for (i=0; i<mappings_nb; i++) {
-                        if (streq(name, mappings[i].name_24))
-                                return mappings[i].name_26;
-                }
-        return name;
-}
-
-
-#ifndef DISABLE_NETWORK
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type, char * options, int allow_modules_floppy)
-#else
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type __attribute__ ((unused)), char * options, int allow_modules_floppy)
-#endif
-{
-	int i;
-#ifndef DISABLE_NETWORK
-	char ** net_devices = NULL; /* fucking compiler */
-#endif
-
-        const char * real_mod_name = get_name_kernel_26_transition(mod_name);
-
-	if (module_already_present(real_mod_name))
-		return INSMOD_OK;
-
-	log_message("have to insmod %s", real_mod_name);
-
-#ifndef DISABLE_NETWORK
-	if (type == NETWORK_DEVICES)
-		net_devices = get_net_devices();
-#endif
-
-	if (IS_TESTING)
-		return INSMOD_OK;
-
-#ifdef ENABLE_NETWORK_STANDALONE
-	{
-		char *cmd = options ? asprintf_("/sbin/modprobe %s %s", mod_name, options) : 
-			              asprintf_("/sbin/modprobe %s", mod_name);
-		log_message("running %s", cmd);
-		i = system(cmd);
-	}
-#else
-	i = insmod_with_deps(real_mod_name, options, allow_modules_floppy);
-#endif
-	if (i == 0) {
-		log_message("\tsucceeded %s", real_mod_name);
-#ifndef DISABLE_NETWORK
-		if (type == NETWORK_DEVICES) {
-			char ** new_net_devices = get_net_devices();
-			while (new_net_devices && *new_net_devices) {
-				char alias[500];
-				char ** ptr = net_devices;
-				while (ptr && *ptr) {
-					if (!strcmp(*new_net_devices, *ptr))
-						goto already_present;
-					ptr++;
-				}
-				sprintf(alias, "alias %s %s", *new_net_devices, mod_name);
-				add_modules_conf(alias);
-				log_message("NET: %s", alias);
-				net_discovered_interface(*new_net_devices);
-				
-			already_present:
-				new_net_devices++;
-			}
-		}
-#endif
-	} else
-		log_message("warning, insmod failed (%s %s) (%d)", real_mod_name, options, i);
-	
-	return i;
-
-}
-
-static enum return_type insmod_with_options(char * mod, enum driver_type type)
-{
-	char * questions[] = { "Options", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-	char options[500] = "options ";
-
-	results = ask_from_entries("Please enter the parameters to give to the kernel:", questions, &answers, 24, NULL);
-	if (results != RETURN_OK)
-		return results;
-
-	strcat(options, mod);
-	strcat(options, " ");
-	strcat(options, answers[0]); // because my_insmod will eventually modify the string
-	
-	if (my_insmod(mod, type, answers[0], 1) != INSMOD_OK) {
-		stg1_error_message("Insmod failed.");
-		return RETURN_ERROR;
-	}
-	
-	add_modules_conf(options);
-
-	return RETURN_OK;
-}
-
-enum return_type ask_insmod(enum driver_type type)
-{
-	char * mytype;
-	char msg[200];
-	enum return_type results;
-	char * choice;
-
-	unset_automatic(); /* we are in a fallback mode */
-
-	if (type == SCSI_ADAPTERS)
-		mytype = "SCSI";
-	else if (type == NETWORK_DEVICES)
-		mytype = "NET";
-	else
-		return RETURN_ERROR;
-
-	snprintf(msg, sizeof(msg), "Which driver should I try to gain %s access?", mytype);
-
-	{
-		char ** modules = mar_list_contents(ensure_additional_modules_available() == RETURN_OK ? additional_archive_name
-                                                                                                       : archive_name);
-		char ** descrs = malloc(sizeof(char *) * string_array_length(modules));
-		char ** p_modules = modules;
-		char ** p_descrs = descrs;
-		while (p_modules && *p_modules) {
-			int i;
-			*p_descrs = NULL;
-			for (i = 0 ; i < modules_descriptions_num ; i++) {
-				if (!strncmp(*p_modules, modules_descriptions[i].module, strlen(modules_descriptions[i].module))
-				    && (*p_modules)[strlen(modules_descriptions[i].module)] == '.') /* one contains '.o' not the other */
-					*p_descrs = modules_descriptions[i].descr;
-			}
-			p_modules++;
-			p_descrs++;
-		}
-		if (modules && *modules)
-			results = ask_from_list_comments(msg, modules, descrs, &choice);
-		else
-			results = RETURN_BACK;
-	}
-
-	if (results == RETURN_OK) {
-		choice[strlen(choice)-strlen(kernel_module_extension())] = '\0'; /* remove trailing .ko or .o */
-		return insmod_with_options(choice, type);
-	} else
-		return results;
-}
diff --git a/mdk-stage1/modules.h b/mdk-stage1/modules.h
deleted file mode 100644
index d42d55218..000000000
--- a/mdk-stage1/modules.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _MODULES_H_
-#define _MODULES_H_
-
-#include "stage1.h"
-#include "probing.h"
-
-enum insmod_return { INSMOD_OK, INSMOD_FAILED, INSMOD_FAILED_FILE_NOT_FOUND };
-
-void init_modules_insmoding(void);
-int insmod_local_file(char * path, char * options);
-enum insmod_return my_insmod(const char * mod_name, enum driver_type type, char * options, int allow_modules_floppy);
-enum return_type ask_insmod(enum driver_type);
-int module_already_present(const char * name);
-
-struct module_deps_elem {
-    char * name;
-    char ** deps;
-};
-
-extern int disable_modules;
-extern int allow_additional_modules_floppy;
-
-#endif
diff --git a/mdk-stage1/modules_descr.h b/mdk-stage1/modules_descr.h
deleted file mode 100644
index 8faf726af..000000000
--- a/mdk-stage1/modules_descr.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _MODULES_DESCR_H_
-#define _MODULES_DESCR_H_
-
-struct module_descr {
-	const char * module;
-	char * descr;
-};
-
-struct module_descr modules_descriptions[] = {
-#ifndef DISABLE_NETWORK
-	/* description of network drivers that have not very explicit names */
-	{ "ne",        "NE1000/NE2000/clones" },
-	{ "ne2k-pci",  "PCI NE2000" },
-	{ "depca",     "DEC DEPCA/DE100/DE101/DE200/DE201/DE202/DE210/DE422" },
-	{ "dgrs",      "Digi RightSwitch SE-X" },
-	{ "ewrk3",     "DEC DE203/DE204/DE205" },
-	{ "lance",     "Allied Telesis AT1500, HP J2405A, NE2100/NE2500" },
-	{ "sis900",    "SiS 900/7016/630E, Am79c901, RTL8201" },
-	{ "via-rhine", "VIA VT86c100A Rhine-II, 3043 Rhine-I" },
-	{ "tulip",     "DEC 21040-family based cards" },
-	{ "wd",        "WD8003/WD8013" },
-	{ "bmac",      "Macintosh integrated ethernet (G3)" },
-	{ "gmac",      "Macintosh integrated ethernet (G4/iBook)" },
-	{ "mace",      "Macintosh integrated ethernet (PowerMac)" },
-#endif
-
-#ifndef DISABLE_MEDIAS
-	/* description of scsi drivers that have not very explicit names */
-	{ "53c7,8xx",  "NCR53c810/700" },
-	{ "sim710",    "NCR53c710" },
-	{ "aic7xxx",   "Adaptec 7xxx family (AIC/AHA/etc)" },
-	{ "atp870u",   "ACARD/ARTOP AEC-6710/6712" },
-	{ "ncr53c8xx", "Symbios 53c family" },
-	{ "sym53c8xx", "Symbios 53c family" },
-	{ "sim710",    "NCR53C710 family" },
-	{ "mesh",      "Macintosh integrated SCSI (NewWorld or internal SCSI)" },
-	{ "mac53c94",  "Macintosh integrated SCSI (OldWorld or external SCSI)" },
-#endif
-
-#ifdef ENABLE_USB
-	/* description of usb drivers that have not very explicit names */
-	{ "usbnet",    "Netchip or Prolific USB-USB Bridge" },
-	{ "pegasus",   "ADMtek AN986 (USB Ethernet chipset)" },
-	{ "kaweth",    "KL5KUSB101 (USB Ethernet chipset)" },
-	{ "catc",      "CATC EL1210A NetMate USB Ethernet" },
-#endif
-};
-
-int modules_descriptions_num = sizeof(modules_descriptions) / sizeof(struct module_descr);
-
-
-#endif
diff --git a/mdk-stage1/mount.c b/mdk-stage1/mount.c
deleted file mode 100644
index 40b94a8ec..000000000
--- a/mdk-stage1/mount.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <sys/types.h>
-#include "log.h"
-#include "modules.h"
-
-#include "mount.h"
-
-
-
-/* WARNING: this won't work if the argument is not /dev/ based */
-int ensure_dev_exists(const char * dev)
-{
-	int major, minor;
-	int type = S_IFBLK; /* my default type is block. don't forget to change for chars */
-	const char * name;
-	struct stat buf;
-	char * ptr;
-	
-	name = &dev[5]; /* we really need that dev be passed as /dev/something.. */
-
-	if (!stat(dev, &buf))
-		return 0; /* if the file already exists, we assume it's correct */
-
-	if (ptr_begins_static_str(name, "sd")) {
-		/* SCSI disks */
-		major = 8;
-		minor = (name[2] - 'a') << 4;
-		if (name[3] && name[4])
-			minor += 10 + (name[4] - '0');
-		else if (name[3])
-			minor += (name[3] - '0');
-	} else if (ptr_begins_static_str(name, "hd")) {
-		/* IDE disks/cd's */
-		if (name[2] == 'a')
-			major = 3, minor = 0;
-		else if (name[2] == 'b')
-			major = 3, minor = 64;
-		else if (name[2] == 'c')
-			major = 22, minor = 0;
-		else if (name[2] == 'd')
-			major = 22, minor = 64;
-		else if (name[2] == 'e')
-			major = 33, minor = 0;
-		else if (name[2] == 'f')
-			major = 33, minor = 64;
-		else if (name[2] == 'g')
-			major = 34, minor = 0;
-		else if (name[2] == 'h')
-			major = 34, minor = 64;
-		else if (name[2] == 'i')
-			major = 56, minor = 0;
-		else if (name[2] == 'j')
-			major = 56, minor = 64;
-		else if (name[2] == 'k')
-			major = 57, minor = 0;
-		else if (name[2] == 'l')
-			major = 57, minor = 64;
-		else if (name[2] == 'm')
-			major = 88, minor = 0;
-		else if (name[2] == 'n')
-			major = 88, minor = 64;
-		else if (name[2] == 'o')
-			major = 89, minor = 0;
-		else if (name[2] == 'p')
-			major = 89, minor = 64;
-		else if (name[2] == 'q')
-			major = 90, minor = 0;
-		else if (name[2] == 'r')
-			major = 90, minor = 64;
-		else if (name[2] == 's')
-			major = 91, minor = 0;
-		else if (name[2] == 't')
-			major = 91, minor = 64;
-		else
-			return -1;
-		
-		if (name[3] && name[4])
-			minor += 10 + (name[4] - '0');
-		else if (name[3])
-			minor += (name[3] - '0');
-	} else if (ptr_begins_static_str(name , "sr")) {
-		/* SCSI cd's */
-		major = 11;
-		minor = name[2] - '0';
-	} else if (ptr_begins_static_str(name, "ida/") ||
-		   ptr_begins_static_str(name, "cciss/")) {
-		/* Compaq Smart Array "ida/c0d0{p1}" */
-		ptr = strchr(name, '/');
-		mkdir("/dev/ida", 0755);
-		mkdir("/dev/cciss", 0755);
-		major = ptr_begins_static_str(name, "ida/") ? 72 : 104 + charstar_to_int(ptr+2);
-		ptr = strchr(ptr, 'd');
-		minor = 16 * charstar_to_int(ptr+1);
-		ptr = strchr(ptr, 'p');
-		minor += charstar_to_int(ptr+1);
-	} else if (ptr_begins_static_str(name, "rd/")) {
-		/* DAC960 "rd/cXdXXpX" */
-		mkdir("/dev/rd", 0755);
-		major = 48 + charstar_to_int(name+4);
-		ptr = strchr(name+4, 'd');
-		minor = 8 * charstar_to_int(ptr+1);
-		ptr = strchr(ptr, 'p');
-		minor += charstar_to_int(ptr+1);
-	} else if (ptr_begins_static_str(name, "loop")) {
-		major = 7;
-		minor = name[4] - '0';
-	} else if (ptr_begins_static_str(name, "chloop")) {
-		major = 100;
-		minor = name[6] - '0';
-	} else {
-		log_message("I don't know how to create device %s, please post bugreport to me!", dev);
-		return -1;
-	}
-
-	if (mknod(dev, type | 0600, makedev(major, minor))) {
-		log_perror(dev);
-		return -1;
-	}
-	
-	return 0;
-}
-
-
-/* mounts, creating the device if needed+possible */
-int my_mount(char *dev, char *location, char *fs, int force_rw)
-{
-	unsigned long flags = MS_MGC_VAL | (force_rw ? 0 : MS_RDONLY);
-	char * opts = NULL;
-	struct stat buf;
-	int rc;
-
-	if (strcmp(fs, "nfs")) {
-	    rc = ensure_dev_exists(dev);
-	    if (rc != 0) {
-		    log_message("could not create required device file");
-		    return -1;
-	    }
-	}
-
-	log_message("mounting %s on %s as type %s", dev, location, fs);
-
-	if (stat(location, &buf)) {
-		if (mkdir(location, 0755)) {
-			log_perror("could not create location dir");
-			return -1;
-		}
-	} else if (!S_ISDIR(buf.st_mode)) {
-		log_message("not a dir %s, will unlink and mkdir", location);
-		if (unlink(location)) {
-			log_perror("could not unlink");
-			return -1;
-		}
-		if (mkdir(location, 0755)) {
-			log_perror("could not create location dir");
-			return -1;
-		}
-	}
-
-	if (!strcmp(fs, "supermount")) {
-		my_insmod("supermount", ANY_DRIVER_TYPE, NULL, 1);
-		my_insmod("isofs", ANY_DRIVER_TYPE, NULL, 1);
-		opts = alloca(500);
-                sprintf(opts, "dev=%s,fs=iso9660,tray_lock=always", dev);
-                dev = "none";
-	}
-
-#ifndef DISABLE_MEDIAS
-	if (!strcmp(fs, "vfat")) {
-		my_insmod("vfat", ANY_DRIVER_TYPE, NULL, 1);
-		opts = "check=relaxed";
-	}
-
-	if (!strcmp(fs, "ntfs")) {
-		my_insmod("ntfs", ANY_DRIVER_TYPE, NULL, 1);
-	}
-
-	if (!strcmp(fs, "reiserfs"))
-		my_insmod("reiserfs", ANY_DRIVER_TYPE, NULL, 1);
-
-#endif
-	if (!strcmp(fs, "iso9660"))
-		my_insmod("isofs", ANY_DRIVER_TYPE, NULL, 1);
-
-#ifndef DISABLE_NETWORK
-	if (!strcmp(fs, "nfs")) {
-		my_insmod("nfs", ANY_DRIVER_TYPE, NULL, 1);
-		log_message("preparing nfsmount for %s", dev);
-		rc = nfsmount_prepare(dev, &opts);
-		if (rc != 0)
-			return rc;
-	}
-#endif
-
-	rc = mount(dev, location, fs, flags, opts);
-	if (rc != 0) {
-		log_perror("mount failed");
-		rmdir(location);
-	}
-
-	return rc;
-}
diff --git a/mdk-stage1/mount.h b/mdk-stage1/mount.h
deleted file mode 100644
index 4a4317182..000000000
--- a/mdk-stage1/mount.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _MOUNT_H_
-#define _MOUNT_H_
-
-#ifndef DISABLE_NETWORK
-#include "nfsmount.h"
-#endif
-
-int my_mount(char *dev, char *location, char *fs, int force_rw);
-int ensure_dev_exists(const char * dev);
-
-#endif
diff --git a/mdk-stage1/mount_rpcgen.h b/mdk-stage1/mount_rpcgen.h
deleted file mode 100644
index d70ccaf9d..000000000
--- a/mdk-stage1/mount_rpcgen.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _MOUNT_H_RPCGEN
-#define _MOUNT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-#define MNTPATHLEN 1024
-#define MNTNAMLEN 255
-#define FHSIZE 32
-
-typedef char fhandle[FHSIZE];
-#ifdef __cplusplus 
-extern "C" bool_t xdr_fhandle(XDR *, fhandle);
-#elif __STDC__ 
-extern  bool_t xdr_fhandle(XDR *, fhandle);
-#else /* Old Style C */ 
-bool_t xdr_fhandle();
-#endif /* Old Style C */ 
-
-
-struct fhstatus {
-	u_int fhs_status;
-	union {
-		fhandle fhs_fhandle;
-	} fhstatus_u;
-};
-typedef struct fhstatus fhstatus;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_fhstatus(XDR *, fhstatus*);
-#elif __STDC__ 
-extern  bool_t xdr_fhstatus(XDR *, fhstatus*);
-#else /* Old Style C */ 
-bool_t xdr_fhstatus();
-#endif /* Old Style C */ 
-
-
-typedef char *dirpath;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_dirpath(XDR *, dirpath*);
-#elif __STDC__ 
-extern  bool_t xdr_dirpath(XDR *, dirpath*);
-#else /* Old Style C */ 
-bool_t xdr_dirpath();
-#endif /* Old Style C */ 
-
-
-typedef char *name;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_name(XDR *, name*);
-#elif __STDC__ 
-extern  bool_t xdr_name(XDR *, name*);
-#else /* Old Style C */ 
-bool_t xdr_name();
-#endif /* Old Style C */ 
-
-
-typedef struct mountbody *mountlist;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_mountlist(XDR *, mountlist*);
-#elif __STDC__ 
-extern  bool_t xdr_mountlist(XDR *, mountlist*);
-#else /* Old Style C */ 
-bool_t xdr_mountlist();
-#endif /* Old Style C */ 
-
-
-struct mountbody {
-	name ml_hostname;
-	dirpath ml_directory;
-	mountlist ml_next;
-};
-typedef struct mountbody mountbody;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_mountbody(XDR *, mountbody*);
-#elif __STDC__ 
-extern  bool_t xdr_mountbody(XDR *, mountbody*);
-#else /* Old Style C */ 
-bool_t xdr_mountbody();
-#endif /* Old Style C */ 
-
-
-typedef struct groupnode *groups;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_groups(XDR *, groups*);
-#elif __STDC__ 
-extern  bool_t xdr_groups(XDR *, groups*);
-#else /* Old Style C */ 
-bool_t xdr_groups();
-#endif /* Old Style C */ 
-
-
-struct groupnode {
-	name gr_name;
-	groups gr_next;
-};
-typedef struct groupnode groupnode;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_groupnode(XDR *, groupnode*);
-#elif __STDC__ 
-extern  bool_t xdr_groupnode(XDR *, groupnode*);
-#else /* Old Style C */ 
-bool_t xdr_groupnode();
-#endif /* Old Style C */ 
-
-
-typedef struct exportnode *exports;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_exports(XDR *, exports*);
-#elif __STDC__ 
-extern  bool_t xdr_exports(XDR *, exports*);
-#else /* Old Style C */ 
-bool_t xdr_exports();
-#endif /* Old Style C */ 
-
-
-struct exportnode {
-	dirpath ex_dir;
-	groups ex_groups;
-	exports ex_next;
-};
-typedef struct exportnode exportnode;
-#ifdef __cplusplus 
-extern "C" bool_t xdr_exportnode(XDR *, exportnode*);
-#elif __STDC__ 
-extern  bool_t xdr_exportnode(XDR *, exportnode*);
-#else /* Old Style C */ 
-bool_t xdr_exportnode();
-#endif /* Old Style C */ 
-
-
-#define MOUNTPROG ((u_long)100005)
-#define MOUNTVERS ((u_long)1)
-
-#ifdef __cplusplus
-#define MOUNTPROC_NULL ((u_long)0)
-extern "C" void * mountproc_null_1(void *, CLIENT *);
-extern "C" void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern "C" fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern "C" fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern "C" mountlist * mountproc_dump_1(void *, CLIENT *);
-extern "C" mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern "C" void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern "C" void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern "C" void * mountproc_umntall_1(void *, CLIENT *);
-extern "C" void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern "C" exports * mountproc_export_1(void *, CLIENT *);
-extern "C" exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern "C" exports * mountproc_exportall_1(void *, CLIENT *);
-extern "C" exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#elif __STDC__
-#define MOUNTPROC_NULL ((u_long)0)
-extern  void * mountproc_null_1(void *, CLIENT *);
-extern  void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT ((u_long)1)
-extern  fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern  fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP ((u_long)2)
-extern  mountlist * mountproc_dump_1(void *, CLIENT *);
-extern  mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT ((u_long)3)
-extern  void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern  void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern  void * mountproc_umntall_1(void *, CLIENT *);
-extern  void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern  exports * mountproc_export_1(void *, CLIENT *);
-extern  exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern  exports * mountproc_exportall_1(void *, CLIENT *);
-extern  exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-
-#else /* Old Style C */ 
-#define MOUNTPROC_NULL ((u_long)0)
-extern  void * mountproc_null_1();
-extern  void * mountproc_null_1_svc();
-#define MOUNTPROC_MNT ((u_long)1)
-extern  fhstatus * mountproc_mnt_1();
-extern  fhstatus * mountproc_mnt_1_svc();
-#define MOUNTPROC_DUMP ((u_long)2)
-extern  mountlist * mountproc_dump_1();
-extern  mountlist * mountproc_dump_1_svc();
-#define MOUNTPROC_UMNT ((u_long)3)
-extern  void * mountproc_umnt_1();
-extern  void * mountproc_umnt_1_svc();
-#define MOUNTPROC_UMNTALL ((u_long)4)
-extern  void * mountproc_umntall_1();
-extern  void * mountproc_umntall_1_svc();
-#define MOUNTPROC_EXPORT ((u_long)5)
-extern  exports * mountproc_export_1();
-extern  exports * mountproc_export_1_svc();
-#define MOUNTPROC_EXPORTALL ((u_long)6)
-extern  exports * mountproc_exportall_1();
-extern  exports * mountproc_exportall_1_svc();
-#endif /* Old Style C */ 
-
-#endif /* !_MOUNT_H_RPCGEN */
diff --git a/mdk-stage1/network.c b/mdk-stage1/network.c
deleted file mode 100644
index 1d65acdaf..000000000
--- a/mdk-stage1/network.c
+++ /dev/null
@@ -1,1164 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-/* define _GNU_SOURCE so strndup is available */
-#define _GNU_SOURCE
-#include <string.h>
-#include <unistd.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <arpa/inet.h>
-#include <net/route.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <stdio.h>
-#include <netdb.h>
-#include <resolv.h>
-#include <sys/utsname.h>
-
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-#include "automatic.h"
-#include "dhcp.h"
-#include "adsl.h"
-#include "url.h"
-#include "dns.h"
-
-#include "network.h"
-#include "directory.h"
-#include "wireless.h"
-
-static void error_message_net(void)  /* reduce code size */
-{
-	stg1_error_message("Could not configure network.");
-}
-
-
-int configure_net_device(struct interface_info * intf)
-{
-	struct ifreq req;
-	struct rtentry route;
-	int s;
-	struct sockaddr_in addr;
-	struct in_addr ia;
-	char ip[20], nm[20], nw[20], bc[20];
-	
-	addr.sin_family = AF_INET;
-	addr.sin_port = 0;
-	
-	memcpy(&ia, &intf->ip, sizeof(intf->ip));
-	strcpy(ip, inet_ntoa(ia));
-	
-	memcpy(&ia, &intf->netmask, sizeof(intf->netmask));
-	strcpy(nm, inet_ntoa(ia));
-	
-	memcpy(&ia, &intf->broadcast, sizeof(intf->broadcast));
-	strcpy(bc, inet_ntoa(ia));
-	
-	memcpy(&ia, &intf->network, sizeof(intf->network));
-	strcpy(nw, inet_ntoa(ia));
-
-	log_message("configuring device %s ip: %s nm: %s nw: %s bc: %s", intf->device, ip, nm, nw, bc);
-
-	if (IS_TESTING)
-		return 0;
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-		log_perror("socket");
-		error_message_net();
-		return 1;
-	}
-
-	strcpy(req.ifr_name, intf->device);
-
-	if (intf->is_up == 1) {
-		log_message("interface already up, downing before reconfigure");
-
-		req.ifr_flags = 0;
-		if (ioctl(s, SIOCSIFFLAGS, &req)) {
-			close(s);
-			log_perror("SIOCSIFFLAGS (downing)");
-			error_message_net();
-			return 1;
-		}
-	}
-		
-	/* sets IP address */
-	addr.sin_port = 0;
-	memcpy(&addr.sin_addr, &intf->ip, sizeof(intf->ip));
-	memcpy(&req.ifr_addr, &addr, sizeof(addr));
-	if (ioctl(s, SIOCSIFADDR, &req)) {
-		close(s);
-		log_perror("SIOCSIFADDR");
-		error_message_net();
-		return 1;
-	}
-
-	/* sets broadcast */
-	memcpy(&addr.sin_addr, &intf->broadcast, sizeof(intf->broadcast));
-	memcpy(&req.ifr_broadaddr, &addr, sizeof(addr));
-	if (ioctl(s, SIOCSIFBRDADDR, &req)) {
-		close(s);
-		log_perror("SIOCSIFBRDADDR");
-		error_message_net();
-		return 1;
-	}
-
-	/* sets netmask */
-	memcpy(&addr.sin_addr, &intf->netmask, sizeof(intf->netmask));
-	memcpy(&req.ifr_netmask, &addr, sizeof(addr));
-	if (ioctl(s, SIOCSIFNETMASK, &req)) {
-		close(s);
-		log_perror("SIOCSIFNETMASK");
-		error_message_net();
-		return 1;
-	}
-
-	if (intf->is_ptp)
-		req.ifr_flags = IFF_UP | IFF_RUNNING | IFF_POINTOPOINT | IFF_NOARP;
-	else
-		req.ifr_flags = IFF_UP | IFF_RUNNING | IFF_BROADCAST;
-
-	/* brings up networking! */
-	if (ioctl(s, SIOCSIFFLAGS, &req)) {
-		close(s);
-		log_perror("SIOCSIFFLAGS (upping)");
-		error_message_net();
-		return 1;
-	}
-
-	memset(&route, 0, sizeof(route));
-	route.rt_dev = intf->device;
-	route.rt_flags = RTF_UP;
-	
-	memcpy(&addr.sin_addr, &intf->network, sizeof(intf->network));
-	memcpy(&route.rt_dst, &addr, sizeof(addr));
-	
-	memcpy(&addr.sin_addr, &intf->netmask, sizeof(intf->netmask));
-	memcpy(&route.rt_genmask, &addr, sizeof(addr));
-
-	/* adds route */
-	if (ioctl(s, SIOCADDRT, &route)) {
-		close(s);
-		log_perror("SIOCADDRT");
-		error_message_net();
-		return 1;
-	}
-
-	close(s);
-
-	intf->is_up = 1;
-
-	if (intf->boot_proto != BOOTPROTO_DHCP && !streq(intf->device, "lo")) {
-		/* I need to sleep a bit in order for kernel to finish
-		   init of the network device; if not, first sendto() for
-		   gethostbyaddr will get an EINVAL. */
-		wait_message("Bringing up networking...");
-		sleep(2);
-		remove_wait_message();
-	}
-
-	return 0;
-}
-
-/* host network informations */ 
-char * hostname = NULL;
-char * domain = NULL;
-struct in_addr gateway = { 0 };
-struct in_addr dns_server = { 0 };
-struct in_addr dns_server2 = { 0 };
-
-static int add_default_route(void)
-{
-	int s;
-	struct rtentry route;
-	struct sockaddr_in addr;
-
-	if (IS_TESTING)
-		return 0;
-
-	if (gateway.s_addr == 0) {
-		log_message("no gateway provided, can't add default route");
-		return 0;
-	}
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-		close(s);
-		log_perror("socket");
-		error_message_net();
-		return 1;
-	}
-
-	memset(&route, 0, sizeof(route));
-
-	addr.sin_family = AF_INET;
-	addr.sin_port = 0;
-	addr.sin_addr = gateway;
-	memcpy(&route.rt_gateway, &addr, sizeof(addr));
-
-	addr.sin_addr.s_addr = INADDR_ANY;
-	memcpy(&route.rt_dst, &addr, sizeof(addr));
-	memcpy(&route.rt_genmask, &addr, sizeof(addr));
-
-	route.rt_flags = RTF_UP | RTF_GATEWAY;
-	route.rt_metric = 0;
-
-	if (ioctl(s, SIOCADDRT, &route)) {
-		close(s);
-		log_perror("SIOCADDRT");
-		error_message_net();
-		return 1;
-	}
-
-	close(s);
-	
-	return 0;
-}
-
-
-static int write_resolvconf(void)
-{
-	char * filename = "/etc/resolv.conf";
-	FILE * f;
-	
-	if (dns_server.s_addr == 0) {
-		log_message("resolvconf needs a dns server");
-		return -1;
-	}
-
-	f = fopen(filename, "w");
-	if (!f) {
-		log_perror(filename);
-		return -1;
-	}
-
-	if (domain)
-		fprintf(f, "search %s\n", domain); /* we can live without the domain search (user will have to enter fully-qualified names) */
-	fprintf(f, "nameserver %s\n", inet_ntoa(dns_server));
-	if (dns_server2.s_addr != 0)
-		fprintf(f, "nameserver %s\n", inet_ntoa(dns_server2));
-
-	fclose(f);
-	res_init();		/* reinit the resolver so DNS changes take affect */
-
-	return 0;
-}
-
-
-static int save_netinfo(struct interface_info * intf)
-{
-	char * file_network = "/tmp/network";
-	char file_intf[500];
-	FILE * f;
-	
-	f = fopen(file_network, "w");
-	if (!f) {
-		log_perror(file_network);
-		return -1;
-	}
-
-	fprintf(f, "NETWORKING=yes\n");
-	fprintf(f, "FORWARD_IPV4=false\n");
-
-	if (hostname && !intf->boot_proto == BOOTPROTO_DHCP)
-		fprintf(f, "HOSTNAME=%s\n", hostname);
-	if (domain)
-		fprintf(f, "DOMAINNAME=%s\n", domain);
-	if (dhcp_hostname && !streq(dhcp_hostname, ""))
-		fprintf(f, "DHCP_HOSTNAME=%s\n", dhcp_hostname);
-	
-	if (gateway.s_addr != 0)
-		fprintf(f, "GATEWAY=%s\n", inet_ntoa(gateway));
-
-	fclose(f);
-
-	
-	strcpy(file_intf, "/tmp/ifcfg-");
-	strcat(file_intf, intf->device);
-
-	f = fopen(file_intf, "w");
-	if (!f) {
-		log_perror(file_intf);
-		return -1;
-	}
-
-	fprintf(f, "DEVICE=%s\n", intf->device);
-
-	if (intf->boot_proto == BOOTPROTO_DHCP)
-		fprintf(f, "BOOTPROTO=dhcp\n");
-	else if (intf->boot_proto == BOOTPROTO_STATIC) {
-		fprintf(f, "BOOTPROTO=static\n");
-		fprintf(f, "IPADDR=%s\n", inet_ntoa(intf->ip));
-		fprintf(f, "NETMASK=%s\n", inet_ntoa(intf->netmask));
-		fprintf(f, "NETWORK=%s\n", inet_ntoa(intf->network));
-		fprintf(f, "BROADCAST=%s\n", inet_ntoa(intf->broadcast));
-	} else if (intf->boot_proto == BOOTPROTO_ADSL_PPPOE) {
-		fprintf(f, "BOOTPROTO=adsl_pppoe\n");
-		fprintf(f, "USER=%s\n", intf->user);
-		fprintf(f, "PASS=%s\n", intf->pass);
-		fprintf(f, "ACNAME=%s\n", intf->acname);
-	}
-
-	fclose(f);
-
-	return 0;
-}
-
-
-char * guess_netmask(char * ip_addr)
-{
-	struct in_addr addr;
-	unsigned long int tmp;
-
-	if (streq(ip_addr, "") || !inet_aton(ip_addr, &addr))
-		return "";
-
-	log_message("guessing netmask");
-
-	tmp = ntohl(addr.s_addr);
-	
-	if (((tmp & 0xFF000000) >> 24) <= 127)
-		return "255.0.0.0";
-	else if (((tmp & 0xFF000000) >> 24) <= 191)
-		return "255.255.0.0";
-	else 
-		return "255.255.255.0";
-}
-
-
-char * guess_domain_from_hostname(char *hostname)
-{
-	char *domain = strchr(strdup(hostname), '.');
-	if (!domain || domain[1] == '\0') {
-		log_message("unable to guess domain from hostname: %s", hostname);
-		return NULL;
-	}
-	return domain + 1; /* skip '.' */
-}
-
-
-static void static_ip_callback(char ** strings)
-{
-	struct in_addr addr;
-
-        static int done = 0;
-        if (done)
-                return;
-	if (streq(strings[0], "") || !inet_aton(strings[0], &addr))
-		return;
-        done = 1;
-
-	if (!strcmp(strings[1], "")) {
-		char * ptr;
-		strings[1] = strdup(strings[0]);
-		ptr = strrchr(strings[1], '.');
-		if (ptr)
-			*(ptr+1) = '\0';
-	}
-
-	if (!strcmp(strings[2], ""))
-		strings[2] = strdup(strings[1]);
-
-	if (!strcmp(strings[3], ""))
-		strings[3] = strdup(guess_netmask(strings[0]));
-}
-
-
-static enum return_type setup_network_interface(struct interface_info * intf)
-{
-	enum return_type results;
-	char * bootprotos[] = { "Static", "DHCP", "ADSL", NULL };
-	char * bootprotos_auto[] = { "static", "dhcp", "adsl" };
-	char * choice;
-
-	results = ask_from_list_auto("Please select your network connection type.", bootprotos, &choice, "network", bootprotos_auto);
-	if (results != RETURN_OK)
-		return results;
-
-	if (!strcmp(choice, "Static")) {
-		char * questions[] = { "IP of this machine", "IP of DNS", "IP of default gateway", "Netmask", NULL };
-		char * questions_auto[] = { "ip", "dns", "gateway", "netmask" };
-		static char ** answers = NULL;
-		struct in_addr addr;
-
-		results = ask_from_entries_auto("Please enter the network information. (leave netmask blank for Internet standard)",
-						questions, &answers, 16, questions_auto, static_ip_callback);
-		if (results != RETURN_OK)
-			return setup_network_interface(intf);
-
-		if (streq(answers[0], "") || !inet_aton(answers[0], &addr)) {
-			stg1_error_message("Invalid IP address.");
-			return setup_network_interface(intf);
-		}
-		memcpy(&intf->ip, &addr, sizeof(addr));
-
-		if (!inet_aton(answers[1], &dns_server)) {
-			log_message("invalid DNS");
-			dns_server.s_addr = 0; /* keep an understandable state */
-		}
-
-		if (streq(answers[0], answers[1])) {
-			log_message("IP and DNS are the same, guess you don't want a DNS, disabling it");
-			dns_server.s_addr = 0; /* keep an understandable state */
-		}
-
-		if (!inet_aton(answers[2], &gateway)) {
-			log_message("invalid gateway");
-			gateway.s_addr = 0; /* keep an understandable state */
-		}
-
-		if ((streq(answers[3], "") && inet_aton(guess_netmask(answers[0]), &addr))
-		    || inet_aton(answers[3], &addr))
-			memcpy(&intf->netmask, &addr, sizeof(addr));
-		else {
-			stg1_error_message("Invalid netmask.");
-			return setup_network_interface(intf);
-		}
-
-		*((uint32_t *) &intf->broadcast) = (*((uint32_t *) &intf->ip) &
-						    *((uint32_t *) &intf->netmask)) | ~(*((uint32_t *) &intf->netmask));
-
-		inet_aton("255.255.255.255", &addr);
-		if (!memcmp(&addr, &intf->netmask, sizeof(addr))) {
-			log_message("netmask is 255.255.255.255 -> point to point device");
-			intf->network = gateway;
-			intf->is_ptp = 1;
-		} else {
-			*((uint32_t *) &intf->network) = *((uint32_t *) &intf->ip) & *((uint32_t *) &intf->netmask);
-			intf->is_ptp = 0;
-		}
-		intf->boot_proto = BOOTPROTO_STATIC;
-
-		if (configure_net_device(intf))
-			return RETURN_ERROR;
-
-	} else if (streq(choice, "DHCP")) {
-		results = perform_dhcp(intf);
-
-		if (results == RETURN_BACK)
-			return setup_network_interface(intf);
-		if (results == RETURN_ERROR)
-			return results;
-		intf->boot_proto = BOOTPROTO_DHCP;
-
-		if (configure_net_device(intf))
-			return RETURN_ERROR;
-
-	} else if (streq(choice, "ADSL")) {
-		results = perform_adsl(intf);
-
-		if (results == RETURN_BACK)
-			return setup_network_interface(intf);
-		if (results == RETURN_ERROR)
-			return results;
-	} else
-		return RETURN_ERROR;
-	
-	return add_default_route();
-}
-
-
-static enum return_type configure_network(struct interface_info * intf)
-{
-	char * dnshostname;
-
-	if (hostname && domain)
-		return RETURN_OK;
-
-	dnshostname = mygethostbyaddr(inet_ntoa(intf->ip));
-
-	if (dnshostname) {
-		if (intf->boot_proto == BOOTPROTO_STATIC)
-			hostname = strdup(dnshostname);
-		domain = guess_domain_from_hostname(dnshostname);
-		if (domain) {
-			log_message("got hostname and domain from dns entry, %s and %s", dnshostname, domain);
-			return RETURN_OK;
-		}
-	} else
-		log_message("reverse name lookup on self failed");
-
-	if (domain)
-		return RETURN_OK;
-
-	dnshostname = NULL;
-	if (dns_server.s_addr != 0) {
-		wait_message("Trying to resolve dns...");
-		dnshostname = mygethostbyaddr(inet_ntoa(dns_server));
-		remove_wait_message();
-		if (dnshostname) {
-			log_message("got DNS fullname, %s", dnshostname);
-			domain = guess_domain_from_hostname(dnshostname);
-		} else
-			log_message("reverse name lookup on DNS failed");
-	} else
-		log_message("no DNS, unable to guess domain");
-
-	if (domain) {
-		log_message("got domain from DNS fullname, %s", domain);
-	} else {
-		enum return_type results;
-		char * questions[] = { "Host name", "Domain name", NULL };
-		char * questions_auto[] = { "hostname", "domain" };
-		static char ** answers = NULL;
-		char * boulet;
-
-		if (dhcp_hostname || dhcp_domain) {
-		    answers = (char **) malloc(sizeof(questions));
-		    answers[0] = strdup(dhcp_hostname);
-		    answers[1] = strdup(dhcp_domain);
-		}
-
-		if (!dhcp_hostname || !dhcp_hostname) {
-		    results = ask_from_entries_auto("I could not guess hostname and domain name; please fill in this information. "
-						    "Valid answers are for example: `mybox' for hostname and `mynetwork.com' for "
-						    "domain name, for a machine called `mybox.mynetwork.com' on the Internet.",
-						    questions, &answers, 32, questions_auto, NULL);
-		    if (results != RETURN_OK)
-			return results;
-		}
-		
-		hostname = answers[0];
-		if ((boulet = strchr(hostname, '.')) != NULL)
-			boulet[0] = '\0';
-		domain = answers[1];
-	}
-
-	log_message("using hostname %s", hostname);
-	log_message("using domain %s", domain);
-
-	return RETURN_OK;
-}
-
-
-static enum return_type bringup_networking(struct interface_info * intf)
-{
-	static struct interface_info loopback;
-	enum return_type results;
-	
-	my_insmod("af_packet", ANY_DRIVER_TYPE, NULL, 1);
-
-	do {
-		results = configure_wireless(intf->device);
-	} while (results == RETURN_ERROR);
-
-	if (results == RETURN_BACK)
-		return RETURN_BACK;
-
-	do {
-		results = setup_network_interface(intf);
-		if (results != RETURN_OK)
-			return results;
-		write_resolvconf();
-		results = configure_network(intf);
-	} while (results == RETURN_ERROR);
-
-	if (results == RETURN_BACK)
-		return bringup_networking(intf);
-
-	write_resolvconf(); /* maybe we have now domain to write also */
-
-	if (loopback.is_up == 0) {
-		int rc;
-		strcpy(loopback.device, "lo");
-		loopback.is_ptp = 0;
-		loopback.is_up = 0;
-		loopback.ip.s_addr = htonl(0x7f000001);
-		loopback.netmask.s_addr = htonl(0xff000000);
-		loopback.broadcast.s_addr = htonl(0x7fffffff);
-		loopback.network.s_addr = htonl(0x7f000000);
-		rc = configure_net_device(&loopback);
-		if (rc)
-			return RETURN_ERROR;
-	}
-
-	return RETURN_OK;
-}
-
-
-static char * interface_select(void)
-{
-	char ** interfaces, ** ptr;
-	char * descriptions[50];
-	char * choice;
-	int i, count = 0;
-	enum return_type results;
-
-	interfaces = get_net_devices();
-
-	ptr = interfaces;
-	while (ptr && *ptr) {
-		count++;
-		ptr++;
-	}
-
-	if (count == 0) {
-		stg1_error_message("No NET device found.\n"
-				   "Hint: if you're using a Laptop, note that PCMCIA Network adapters are now supported either with `pcmcia.img' or `network.img', please try both these bootdisks.");
-		i = ask_insmod(NETWORK_DEVICES);
-		if (i == RETURN_BACK)
-			return NULL;
-		return interface_select();
-	}
-
-	if (count == 1)
-		return *interfaces;
-
-	i = 0;
-	while (interfaces[i]) {
-		descriptions[i] = get_net_intf_description(interfaces[i]);
-		i++;
-	}
-
-	results = ask_from_list_comments_auto("Please choose the NET device to use for the installation.",
-					      interfaces, descriptions, &choice, "interface", interfaces);
-
-	if (results != RETURN_OK)
-		return NULL;
-
-	return choice;
-}
-
-#ifndef MANDRAKE_MOVE
-static enum return_type get_http_proxy(char **http_proxy_host, char **http_proxy_port)
-{
-	char *questions[] = { "HTTP proxy host", "HTTP proxy port", NULL };
-	char *questions_auto[] = { "proxy_host", "proxy_port", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-	
-	results = ask_from_entries_auto("Please enter HTTP proxy host and port if you need it, else leave them blank or cancel.",
-					questions, &answers, 40, questions_auto, NULL);
-	if (results == RETURN_OK) {
-		*http_proxy_host = answers[0];
-		*http_proxy_port = answers[1];
-	} else {
-		*http_proxy_host = NULL;
-		*http_proxy_port = NULL;
-	}
-
-	return results;
-}
-
-
-static int mirrorlist_entry_split(const char *entry, char *mirror[4]) /* mirror = { medium, protocol, host, path } */
-{
-	char *medium_sep, *protocol_sep, *host_sep, *path_sep;
-
-	medium_sep = strchr(entry, ':');
-	if (!medium_sep || medium_sep == entry) {
-		log_message("NETWORK: no medium in \"%s\"", entry);
-		return -1;
-	}
-
-	mirror[0] = strndup(entry, medium_sep - entry);
-	entry = medium_sep + 1;
-
-	protocol_sep = strstr(entry, "://");
-	if (!protocol_sep || protocol_sep == entry) {
-		log_message("NETWORK: no protocol in \"%s\"", entry);
-		return -1;
-	}
-
-	mirror[1] = strndup(entry, protocol_sep - entry);
-	entry = protocol_sep + 3;
-
-	host_sep = strchr(entry, '/');
-	if (!host_sep || host_sep == entry) {
-		log_message("NETWORK: no hostname in \"%s\"", entry);
-		return -1;
-	}
-
-	mirror[2] = strndup(entry, host_sep - entry);
-	entry = host_sep;
-
-	path_sep = strstr(entry, "/media/main");
-	if (!path_sep || path_sep == entry) {
-		log_message("NETWORK: this path isn't valid : \"%s\"", entry);
-		return -1;
-	}
-
-	mirror[3] = strndup(entry, path_sep - entry);
-
-	return 0;
-}
-
-
-#define MIRRORLIST_MAX_ITEMS 500
-#define MIRRORLIST_MAX_MEDIA 10
-
-static int choose_mirror_from_host_list(char *mirrorlist[][4], const char *protocol, char *medium, char **selected_host, char **filepath)
-{
-	enum return_type results;
-	char *hostlist[MIRRORLIST_MAX_ITEMS+1] = { "Specify the mirror manually", "-----" };
-	int hostlist_index = 2, mirrorlist_index;
-
-	/* select hosts matching medium and protocol */
-	for (mirrorlist_index = 0; mirrorlist[mirrorlist_index][0]; mirrorlist_index++) {
-		if (!strcmp(mirrorlist[mirrorlist_index][0], medium) &&
-		    !strcmp(mirrorlist[mirrorlist_index][1], protocol)) {
-			hostlist[hostlist_index] = mirrorlist[mirrorlist_index][2];
-			hostlist_index++;
-			if (hostlist_index == MIRRORLIST_MAX_ITEMS)
-				break;
-		}
-	}
-	hostlist[hostlist_index] = NULL;
-
-	do {
-		results = ask_from_list("Please select a mirror from the list below.",
-					hostlist, selected_host);
-
-		if (results == RETURN_BACK) {
-			return RETURN_ERROR;
-		} else if (results == RETURN_OK) {
-			if (!strcmp(*selected_host, hostlist[0])) {
-				/* enter the mirror manually */
-				return RETURN_OK;
-			} else if (!strcmp(*selected_host, hostlist[1])) {
-				/* the separator has been selected */
-				results = RETURN_ERROR;
-				continue;
-			}
-		}
-
-		/* select the path according to medium, protocol and host */
-		for (mirrorlist_index = 0; mirrorlist[mirrorlist_index][0]; mirrorlist_index++) {
-			if (!strcmp(mirrorlist[mirrorlist_index][0], medium) &&
-			    !strcmp(mirrorlist[mirrorlist_index][1], protocol) &&
-			    !strcmp(mirrorlist[mirrorlist_index][2], *selected_host)) {
-				*filepath = mirrorlist[mirrorlist_index][3];
-				return RETURN_OK;
-			}
-		}
-
-		stg1_info_message("Unable to find the path for this mirror, please select another one");
-		results = RETURN_ERROR;
-		
-	} while (results == RETURN_ERROR);
-
-	return RETURN_ERROR;
-}
-
-
-static int choose_mirror_from_list(char *http_proxy_host, char *http_proxy_port, const char *protocol, char **selected_host, char **filepath)
-{
-	enum return_type results;
-	char *mirrorlist[MIRRORLIST_MAX_ITEMS+1][4];
-	int mirrorlist_number = 0;
-	char *medialist[MIRRORLIST_MAX_MEDIA+1] = { "Specify the mirror manually", "-----" };
-	int media_number = 2;
-	char *selected_medium;
-	int fd, size, line_pos = 0;
-	char line[500];
-	int use_http_proxy = http_proxy_host && http_proxy_port && !streq(http_proxy_host, "") && !streq(http_proxy_port, "");
-
-	fd = http_download_file(MIRRORLIST_HOST, MIRRORLIST_PATH, &size, use_http_proxy ? "http" : NULL, http_proxy_host, http_proxy_port);
-	if (fd < 0) {
-		log_message("HTTP: unable to get mirrors list");
-		return RETURN_ERROR;
-	}
-
-	while (read(fd, line + line_pos, 1) > 0) {
-		if (line[line_pos] == '\n') {
-			line[line_pos] = '\0';
-			line_pos = 0;
-
-			/* skip medium if it looks like an updates one */
-			if (strstr(line, "updates"))
-				continue;
-
-			if (mirrorlist_entry_split(line, mirrorlist[mirrorlist_number]) < 0)
-				continue;
-
-			/* add medium in media list if different from previous one */
-			if (media_number == 2 ||
-			    strcmp(mirrorlist[mirrorlist_number][0], medialist[media_number-1])) {
-				medialist[media_number] = mirrorlist[mirrorlist_number][0];
-				media_number++;
-			}
-
-			mirrorlist_number++;
-		} else {
-			line_pos++;
-		}
-
-		if (mirrorlist_number >= MIRRORLIST_MAX_ITEMS || media_number >= MIRRORLIST_MAX_MEDIA)
-			break;
-	}
-	close(fd);
-
-	mirrorlist[mirrorlist_number][0] = NULL;
-	medialist[media_number] = NULL;
-
-	do {
-		results = ask_from_list("Please select a medium from the list below.",
-					medialist, &selected_medium);
-
-		if (results == RETURN_BACK) {
-			return RETURN_BACK;
-		} else if (results == RETURN_OK) {
-			if (!strcmp(selected_medium, medialist[0])) {
-				/* enter the mirror manually */
-				return RETURN_OK;
-			} else if (!strcmp(selected_medium, medialist[1])) {
-				/* the separator has been selected */
-				results = RETURN_ERROR;
-				continue;
-			} else {
-				/* a medium has been selected */
-				results = choose_mirror_from_host_list(mirrorlist, protocol, selected_medium, selected_host, filepath);
-			}
-		}
-	} while (results == RETURN_ERROR);
-
-	return results;
-}
-#endif
-
-
-/* -=-=-- */
-
-
-enum return_type intf_select_and_up()
-{
-	static struct interface_info intf[20];
-	static int num_interfaces = 0;
-	struct interface_info * sel_intf = NULL;
-	int i;
-	enum return_type results;
-	char * iface = interface_select();
-	
-	if (iface == NULL)
-		return RETURN_BACK;
-	
-	for (i = 0; i < num_interfaces ; i++)
-		if (!strcmp(intf[i].device, iface))
-			sel_intf = &(intf[i]);
-	
-	if (sel_intf == NULL) {
-		sel_intf = &(intf[num_interfaces]);
-		strcpy(sel_intf->device, iface);
-		sel_intf->is_up = 0;
-		num_interfaces++;
-	}
-	
-	results = bringup_networking(sel_intf);
-
-	if (results == RETURN_OK)
-		save_netinfo(sel_intf);
-
-	return results;
-}
-
-
-
-enum return_type nfs_prepare(void)
-{
-	char * questions[] = { "NFS server name", DISTRIB_NAME " directory", NULL };
-	char * questions_auto[] = { "server", "directory", NULL };
-	static char ** answers = NULL;
-	char * nfs_own_mount = IMAGE_LOCATION_DIR "nfsimage";
-	char * nfsmount_location;
-	enum return_type results = intf_select_and_up(NULL, NULL);
-
-	if (results != RETURN_OK)
-		return results;
-
-	do {
-		results = ask_from_entries_auto("Please enter the name or IP address of your NFS server, "
-						"and the directory containing the " DISTRIB_NAME " Distribution.",
-						questions, &answers, 40, questions_auto, NULL);
-		if (results != RETURN_OK || streq(answers[0], "")) {
-			unset_automatic(); /* we are in a fallback mode */
-			return nfs_prepare();
-		}
-		
-		nfsmount_location = malloc(strlen(answers[0]) + strlen(answers[1]) + 2);
-		strcpy(nfsmount_location, answers[0]);
-		strcat(nfsmount_location, ":");
-		strcat(nfsmount_location, answers[1]);
-		
-		if (my_mount(nfsmount_location, nfs_own_mount, "nfs", 0) == -1) {
-			stg1_error_message("I can't mount the directory from the NFS server.");
-			results = RETURN_BACK;
-			continue;
-		}
-
-		results = try_with_directory(nfs_own_mount, "nfs", "nfs-iso");
-		if (results != RETURN_OK)
-			umount(nfs_own_mount);
-		if (results == RETURN_ERROR)
-                        return RETURN_ERROR;
-	}
-	while (results == RETURN_BACK);
-
-	return RETURN_OK;
-}
-
-
-#ifndef MANDRAKE_MOVE
-enum return_type ftp_prepare(void)
-{
-	char * questions[] = { "FTP server", DISTRIB_NAME " directory", "Login", "Password", NULL };
-	char * questions_auto[] = { "server", "directory", "user", "pass", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-	struct utsname kernel_uname;
-	char *http_proxy_host, *http_proxy_port;
-	int use_http_proxy;
-
-	if (!ramdisk_possible()) {
-		stg1_error_message("FTP install needs more than %d Mbytes of memory (detected %d Mbytes). You may want to try an NFS install.",
-				   MEM_LIMIT_DRAKX, total_memory());
-		return RETURN_ERROR;
-	}
-
-	results = intf_select_and_up();
-
-	if (results != RETURN_OK)
-		return results;
-
-	get_http_proxy(&http_proxy_host, &http_proxy_port);
-	use_http_proxy = http_proxy_host && http_proxy_port && !streq(http_proxy_host, "") && !streq(http_proxy_port, "");
-
-	uname(&kernel_uname);
-
-	do {
-		char location_full[500];
-		int ftp_serv_response = -1;
-		int fd, size;
-		char ftp_hostname[500];
-
-		if (!IS_AUTOMATIC) {
-			if (answers == NULL)
-				answers = (char **) malloc(sizeof(questions));
-
-			results = choose_mirror_from_list(http_proxy_host, http_proxy_port, "ftp", &answers[0], &answers[1]);
-
-			if (results == RETURN_BACK)
-				return ftp_prepare();
-
-                        if (use_http_proxy) {
-                            results = ask_yes_no("Do you want to use this HTTP proxy for FTP connections too ?");
-
-			    if (results == RETURN_BACK)
-				return ftp_prepare();
-
-                            use_http_proxy = results == RETURN_OK;
-                        }
-		}
-
-		results = ask_from_entries_auto("Please enter the name or IP address of the FTP server, "
-						"the directory containing the " DISTRIB_NAME " Distribution, "
-						"and the login/pass if necessary (leave login blank for anonymous). ",
-						questions, &answers, 40, questions_auto, NULL);
-		if (results != RETURN_OK || streq(answers[0], "")) {
-			unset_automatic(); /* we are in a fallback mode */
-			return ftp_prepare();
-		}
-
-		strcpy(location_full, answers[1][0] == '/' ? "" : "/");
-		strcat(location_full, answers[1]);
-
-		if (use_http_proxy) {
-		        log_message("FTP: don't connect to %s directly, will use proxy", answers[0]);
-		} else {
-			char *kernels_list_file, *kernels_list;
-
-		        log_message("FTP: trying to connect to %s", answers[0]);
-			ftp_serv_response = ftp_open_connection(answers[0], answers[2], answers[3], "");
-                        if (ftp_serv_response < 0) {
-                                log_message("FTP: error connect %d", ftp_serv_response);
-                                if (ftp_serv_response == FTPERR_BAD_HOSTNAME)
-                                        stg1_error_message("Error: bad hostname.");
-                                else if (ftp_serv_response == FTPERR_FAILED_CONNECT)
-                                        stg1_error_message("Error: failed to connect to remote host.");
-                                else
-                                        stg1_error_message("Error: couldn't connect.");
-                                results = RETURN_BACK;
-                                continue;
-                        }
-			kernels_list_file = asprintf_("%s/" CLP_LOCATION_REL "mdkinst.kernels", location_full);
-
-			log_message("FTP: trying to retrieve %s", kernels_list_file);
-		        fd = ftp_start_download(ftp_serv_response, kernels_list_file, &size);
-
-			if (fd < 0) {
-				char *msg = str_ftp_error(fd);
-				log_message("FTP: error get %d for remote file %s", fd, kernels_list_file);
-				stg1_error_message("Error: %s.", msg ? msg : "couldn't retrieve list of kernel versions");
-				results = RETURN_BACK;
-				continue;
-			}
-
-			kernels_list = alloca(size);
-			size = read(fd, kernels_list, size);
-			close(fd);
-			ftp_end_data_command(ftp_serv_response);
-			
-			if (!strstr(kernels_list, asprintf_("%s\n", kernel_uname.release))) {
-				stg1_info_message("The modules for this kernel (%s) can't be found on this mirror, please update your boot disk", kernel_uname.release);
-				results = RETURN_BACK;
-				continue;
-			}
-                }
-
-		strcat(location_full, CLP_FILE_REL("/"));
-
-		log_message("FTP: trying to retrieve %s", location_full);
-
-		if (use_http_proxy) {
-			if (strcmp(answers[2], "")) {
-			        strcpy(ftp_hostname, answers[2]); /* user name */
-				strcat(ftp_hostname, ":");
-				strcat(ftp_hostname, answers[3]); /* password */
-				strcat(ftp_hostname, "@");
-			} else {
-			    strcpy(ftp_hostname, "");
-			}
-			strcat(ftp_hostname, answers[0]);
-			fd = http_download_file(ftp_hostname, location_full, &size, "ftp", http_proxy_host, http_proxy_port);
-		} else {
-		        fd = ftp_start_download(ftp_serv_response, location_full, &size);
-		}
-
-		if (fd < 0) {
-			char *msg = str_ftp_error(fd);
-			log_message("FTP: error get %d for remote file %s", fd, location_full);
-			stg1_error_message("Error: %s.", msg ? msg : "couldn't retrieve Installation program");
-			results = RETURN_BACK;
-			continue;
-		}
-
-		log_message("FTP: size of download %d bytes", size);
-		
-		results = load_clp_fd(fd, size);
-		if (results == RETURN_OK) {
-		        if (!use_http_proxy)
-			        ftp_end_data_command(ftp_serv_response);
-		} else {
-			unset_automatic(); /* we are in a fallback mode */
-			return results;
-		}
-
-		if (use_http_proxy) {
-                        add_to_env("METHOD", "http");
-		        sprintf(location_full, "ftp://%s%s", ftp_hostname, answers[1]);
-		        add_to_env("URLPREFIX", location_full);
-			add_to_env("PROXY", http_proxy_host);
-			add_to_env("PROXYPORT", http_proxy_port);
-		} else {
-                        add_to_env("METHOD", "ftp");
-		        add_to_env("HOST", answers[0]);
-			add_to_env("PREFIX", answers[1]);
-			if (!streq(answers[2], "")) {
-			        add_to_env("LOGIN", answers[2]);
-				add_to_env("PASSWORD", answers[3]);
-			}
-		}
-	}
-	while (results == RETURN_BACK);
-
-	return RETURN_OK;
-}
-
-enum return_type http_prepare(void)
-{
-	char * questions[] = { "HTTP server", DISTRIB_NAME " directory", NULL };
-	char * questions_auto[] = { "server", "directory", NULL };
-	static char ** answers = NULL;
-	enum return_type results;
-	char *http_proxy_host, *http_proxy_port;
-
-	if (!ramdisk_possible()) {
-		stg1_error_message("HTTP install needs more than %d Mbytes of memory (detected %d Mbytes). You may want to try an NFS install.",
-				   MEM_LIMIT_DRAKX, total_memory());
-		return RETURN_ERROR;
-	}
-
-	results = intf_select_and_up();
-
-	if (results != RETURN_OK)
-		return results;
-
-        get_http_proxy(&http_proxy_host, &http_proxy_port);
-
-	do {
-		char location_full[500];
-		int fd, size;
-		int use_http_proxy;
-
-		results = ask_from_entries_auto("Please enter the name or IP address of the HTTP server, "
-						"and the directory containing the " DISTRIB_NAME " Distribution.",
-						questions, &answers, 40, questions_auto, NULL);
-		if (results != RETURN_OK || streq(answers[0], "")) {
-			unset_automatic(); /* we are in a fallback mode */
-			return http_prepare();
-		}
-
-		strcpy(location_full, answers[1][0] == '/' ? "" : "/");
-		strcat(location_full, answers[1]);
-		strcat(location_full, CLP_FILE_REL("/"));
-
-		log_message("HTTP: trying to retrieve %s from %s", location_full, answers[0]);
-		
-		use_http_proxy = http_proxy_host && http_proxy_port && !streq(http_proxy_host, "") && !streq(http_proxy_port, "");
-
-		fd = http_download_file(answers[0], location_full, &size, use_http_proxy ? "http" : NULL, http_proxy_host, http_proxy_port);
-		if (fd < 0) {
-			log_message("HTTP: error %d", fd);
-			if (fd == FTPERR_FAILED_CONNECT)
-				stg1_error_message("Error: couldn't connect to server.");
-			else
-				stg1_error_message("Error: couldn't get file (%s).", location_full);
-			results = RETURN_BACK;
-			continue;
-		}
-
-		log_message("HTTP: size of download %d bytes", size);
-		
-		if (load_clp_fd(fd, size) != RETURN_OK) {
-			unset_automatic(); /* we are in a fallback mode */
-			return RETURN_ERROR;
-                }
-
-                add_to_env("METHOD", "http");
-		sprintf(location_full, "http://%s%s%s", answers[0], answers[1][0] == '/' ? "" : "/", answers[1]);
-		add_to_env("URLPREFIX", location_full);
-                if (!streq(http_proxy_host, ""))
-			add_to_env("PROXY", http_proxy_host);
-                if (!streq(http_proxy_port, ""))
-			add_to_env("PROXYPORT", http_proxy_port);
-	}
-	while (results == RETURN_BACK);
-
-	return RETURN_OK;
-
-}
-#endif
diff --git a/mdk-stage1/network.h b/mdk-stage1/network.h
deleted file mode 100644
index a94f8150b..000000000
--- a/mdk-stage1/network.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _NETWORK_H_
-#define _NETWORK_H_
-
-#include <netinet/in.h>
-#include <netinet/ip.h>
-#include <arpa/inet.h>
-
-enum return_type intf_select_and_up();
-
-enum return_type nfs_prepare(void);
-#ifndef MANDRAKE_MOVE
-enum return_type ftp_prepare(void);
-enum return_type http_prepare(void);
-#endif
-
-
-enum boot_proto_type { BOOTPROTO_STATIC, BOOTPROTO_DHCP, BOOTPROTO_ADSL_PPPOE };
-
-/* all of these in_addr things are in network byte order! */
-struct interface_info {
-	char device[10];
-	int is_ptp, is_up;
-	struct in_addr ip, netmask, broadcast, network;
-	enum boot_proto_type boot_proto;
-	char *user, *pass, *acname; /* for ADSL connection */
-};
-
-
-/* these are to be used only by dhcp.c */
-
-char * guess_netmask(char * ip_addr);
-
-int configure_net_device(struct interface_info * intf);
-
-extern char * hostname;
-extern char * domain;
-extern struct in_addr gateway;
-extern struct in_addr dns_server;
-extern struct in_addr dns_server2;
-
-
-
-#endif
diff --git a/mdk-stage1/newt-frontend.c b/mdk-stage1/newt-frontend.c
deleted file mode 100644
index 4bedda82b..000000000
--- a/mdk-stage1/newt-frontend.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-/*
- * Each different frontend must implement all functions defined in frontend.h
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <sys/time.h>
-#include "newt/newt.h"
-
-#include <probing.h>
-
-#include "frontend.h"
-
-void init_frontend(char * welcome_msg)
-{
-	int i;
-	for (i=0; i<38; i++) printf("\n");
-	newtInit();
-	newtCls();
-	
-	newtDrawRootText(0, 0, welcome_msg);
-
-	if (welcome_msg[0]) 
-		newtPushHelpLine(" <Alt-F1> for here, <Alt-F3> to see the logs, <Alt-F4> for kernel msg");
-
-	newtRefresh();
-}
-
-
-void finish_frontend(void)
-{
-	newtFinished();
-}
-
-
-void verror_message(char *msg, va_list ap)
-{
-	newtWinMessagev("Error", "Ok", msg, ap);
-}
-
-void vinfo_message(char *msg, va_list ap)
-{
-	newtWinMessagev("Notice", "Ok", msg, ap);
-}
-
-
-void vwait_message(char *msg, va_list ap)
-{
-	int width, height;
-	char * title = "Please wait...";
-	newtComponent c, f;
-	newtGrid grid;
-	char * buf = NULL;
-	char * flowed;
-	int size = 0;
-	int i = 0;
-	
-	do {
-		size += 1000;
-		if (buf) free(buf);
-		buf = malloc(size);
-		i = vsnprintf(buf, size, msg, ap);
-	} while (i >= size || i == -1);
-
-	flowed = newtReflowText(buf, 60, 5, 5, &width, &height);
-	
-	c = newtTextbox(-1, -1, width, height, NEWT_TEXTBOX_WRAP);
-	newtTextboxSetText(c, flowed);
-
-	grid = newtCreateGrid(1, 1);
-	newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, c, 0, 0, 0, 0, 0, 0);
-	newtGridWrappedWindow(grid, title);
-
-	free(flowed);
-	free(buf);
-
-	f = newtForm(NULL, NULL, 0);
-	newtFormAddComponent(f, c);
-
-	newtDrawForm(f);
-	newtRefresh();
-	newtFormDestroy(f);
-}
-
-void remove_wait_message(void)
-{
-	newtPopWindow();
-}
-
-
-static newtComponent form = NULL, scale = NULL;
-static int size_progress;
-static int actually_drawn;
-static char * msg_progress;
-
-void init_progression_raw(char *msg, int size)
-{
-	size_progress = size;
-	if (size) {
-		actually_drawn = 0;
-		newtCenteredWindow(70, 5, "Please wait...");
-		form = newtForm(NULL, NULL, 0);
-		newtFormAddComponent(form, newtLabel(1, 1, msg));
-		scale = newtScale(1, 3, 68, size);
-		newtFormAddComponent(form, scale);
-		newtDrawForm(form);
-		newtRefresh();
-	}
-	else {
-		wait_message(msg);
-		msg_progress = msg;
-	}
-}
-
-void update_progression_raw(int current_size)
-{
-	if (size_progress) {
-		if (current_size <= size_progress)
-			newtScaleSet(scale, current_size);
-		newtRefresh();
-	}
-	else {
-		struct timeval t;
-		int time;
-		static int last_time = -1;
-		gettimeofday(&t, NULL);
-		time = t.tv_sec*3 + t.tv_usec/300000;
-		if (time != last_time) {
-			char msg_prog_final[500];
-			sprintf(msg_prog_final, "%s (%d bytes read) ", msg_progress, current_size);
-			remove_wait_message();
-			wait_message(msg_prog_final);
-		}
-		last_time = time;
-	}
-}
-
-void end_progression_raw(void)
-{
-	if (size_progress) {
-		newtPopWindow();
-		newtFormDestroy(form);
-	}
-	else
-		remove_wait_message();
-}
-
-
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice)
-{
-	char * items[500];
-	int answer = 0, rc;
-	char ** sav_elems = elems;
-	int i;
-
-	i = 0;
-	while (elems && *elems) {
-		int j = (*elems_comments) ? strlen(*elems_comments) : 0;
-		items[i] = malloc(sizeof(char) * (strlen(*elems) + j + 4));
-		strcpy(items[i], *elems);
-		if (*elems_comments) {
-			strcat(items[i], " (");
-			strcat(items[i], *elems_comments);
-			strcat(items[i], ")");
-		}
-		elems_comments++;
-		i++;
-		elems++;
-	}
-	items[i] = NULL;
-
-	rc = newtWinMenu("Please choose...", msg, 52, 5, 5, 7, items, &answer, "Ok", "Cancel", NULL);
-
-	if (rc == 2)
-		return RETURN_BACK;
-
-	*choice = strdup(sav_elems[answer]);
-
-	return RETURN_OK;
-}
-
-
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice)
-{
-	int answer = 0, rc;
-
-	rc = newtWinMenu("Please choose...", msg, 52, 5, 5, 7, elems, &answer, "Ok", "Cancel", NULL);
-
-	if (rc == 2)
-		return RETURN_BACK;
-
-	*choice = strdup(elems[answer]);
-
-	return RETURN_OK;
-}
-
-
-enum return_type ask_yes_no(char *msg)
-{
-	int rc;
-
-	rc = newtWinTernary("Please answer...", "Yes", "No", "Back", msg);
-
-	if (rc == 1)
-		return RETURN_OK;
-	else if (rc == 3)
-		return RETURN_BACK;
-	else return RETURN_ERROR;
-}
-
-
-static void (*callback_real_function)(char ** strings) = NULL;
-
-static void default_callback(newtComponent co __attribute__ ((unused)), void * data)
-{
-	newtComponent * entries = data;
-	char * strings[50], ** ptr;
-
-	if (!callback_real_function)
-		return;
-
-	ptr = strings;
-	while (entries && *entries) {
-		*ptr = newtEntryGetValue(*entries);
-		entries++;
-		ptr++;
-	}
-
-	callback_real_function(strings);
-
-	ptr = strings;
-	entries = data;
-	while (entries && *entries) {
-		newtEntrySet(*entries, strdup(*ptr), 1);
-		entries++;
-		ptr++;
-	}
-}
-
-/* only supports up to 50 buttons and entries -- shucks! */
-static int mynewtWinEntries(char * title, char * text, int suggestedWidth, int flexDown, 
-			    int flexUp, int dataWidth, void (*callback_func)(char ** strings),
-			    struct newtWinEntry * items, char * button1, ...) {
-	newtComponent buttons[50], result, form, textw;
-	newtGrid grid, buttonBar, subgrid;
-	int numItems;
-	int rc, i;
-	int numButtons;
-	char * buttonName;
-	newtComponent entries[50];
-
-	va_list args;
-	
-	textw = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
-				    flexUp, 0);
-	
-	for (numItems = 0; items[numItems].text; numItems++); 
-	
-	buttonName = button1, numButtons = 0;
-	va_start(args, button1);
-	while (buttonName) {
-		buttons[numButtons] = newtButton(-1, -1, buttonName);
-		numButtons++;
-		buttonName = va_arg(args, char *);
-	}
-	
-	va_end(args);
-	
-	buttonBar = newtCreateGrid(numButtons, 1);
-	for (i = 0; i < numButtons; i++) {
-		newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT, 
-				 buttons[i],
-				 i ? 1 : 0, 0, 0, 0, 0, 0);
-	}
-
-	if (callback_func) {
-		callback_real_function = callback_func;
-		entries[numItems] = NULL;
-	}
-	else
-		callback_real_function = NULL;
-	
-	subgrid = newtCreateGrid(2, numItems);
-	for (i = 0; i < numItems; i++) {
-		newtComponent entr = newtEntry(-1, -1, items[i].value ? 
-					       *items[i].value : NULL, dataWidth,
-					       items[i].value, items[i].flags);
-
-		newtGridSetField(subgrid, 0, i, NEWT_GRID_COMPONENT,
-				 newtLabel(-1, -1, items[i].text),
-				 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-		newtGridSetField(subgrid, 1, i, NEWT_GRID_COMPONENT,
-				 entr,
-				 1, 0, 0, 0, 0, 0);
-		if (callback_func) {
-			entries[i] = entr;
-			newtComponentAddCallback(entr, default_callback, entries);
-		}
-	}
-	
-	
-	grid = newtCreateGrid(1, 3);
-	form = newtForm(NULL, 0, 0);
-	newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, textw, 
-			 0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-	newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, subgrid, 
-			 0, 1, 0, 0, 0, 0);
-	newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttonBar, 
-			 0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-	newtGridAddComponentsToForm(grid, form, 1);
-	newtGridWrappedWindow(grid, title);
-	newtGridFree(grid, 1);
-	
-	result = newtRunForm(form);
-	
-	for (rc = 0; rc < numItems; rc++)
-		*items[rc].value = strdup(*items[rc].value);
-	
-	for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
-	if (rc == numButtons) 
-		rc = 0; /* F12 */
-	else 
-		rc++;
-	
-	newtFormDestroy(form);
-	newtPopWindow();
-	
-	return rc;
-}
-
-
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size, void (*callback_func)(char ** strings))
-{
-	struct newtWinEntry entries[50];
-	int j, i = 0;
-	int rc;
-	char ** already_answers = NULL;
-
-	while (questions && *questions) {
-		entries[i].text = *questions;
-		entries[i].flags = NEWT_FLAG_SCROLL | (!strcmp(*questions, "Password") ? NEWT_FLAG_PASSWORD : 0);
-		i++;
-		questions++;
-	}
-	entries[i].text = NULL;
-	entries[i].value = NULL;
-
-	if (*answers == NULL)
-		*answers = (char **) malloc(sizeof(char *) * i);
-	else
-		already_answers = *answers;
-
-	for (j = 0 ; j < i ; j++) {
-		entries[j].value = &((*answers)[j]);
-		if (already_answers && *already_answers) {
-			*(entries[j].value) = *already_answers;
-			already_answers++;
-		} else
-			*(entries[j].value) = NULL;
-	}
-
-	rc = mynewtWinEntries("Please fill in entries...", msg, 52, 5, 5, entry_size, callback_func, entries, "Ok", "Cancel", NULL); 
-
-	if (rc == 3)
-		return RETURN_BACK;
-	if (rc != 1)
-		return RETURN_ERROR;
-	
-	return RETURN_OK;
-}
-
-
-void suspend_to_console(void) { newtSuspend(); }
-void resume_from_suspend(void) { newtResume(); }
diff --git a/mdk-stage1/newt/Makefile b/mdk-stage1/newt/Makefile
deleted file mode 100644
index fb6cdd5ff..000000000
--- a/mdk-stage1/newt/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libnewt
-
-OBJS = newt.o button.o form.o checkbox.o entry.o label.o listbox.o scrollbar.o textbox.o scale.o grid.o windows.o buttonbar.o checkboxtree.o
-
-DEFS = -DVERSION=\"0.50.19\"
-
-INCS = -I../slang
-
-
-TARGETS = $(LIBNAME).a
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a
-
-$(LIBNAME).a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-$(OBJS): %.o: %.c
-	$(DIET) gcc $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -c $< -o $@
diff --git a/mdk-stage1/newt/button.c b/mdk-stage1/newt/button.c
deleted file mode 100644
index d7da58175..000000000
--- a/mdk-stage1/newt/button.c
+++ /dev/null
@@ -1,192 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct button {
-    char * text;
-    int compact;
-};
-
-static void buttonDrawIt(newtComponent co, int active, int pushed);
-static void buttonDrawText(newtComponent co, int active, int pushed);
-
-static void buttonDraw(newtComponent c);
-static void buttonDestroy(newtComponent co);
-static struct eventResult buttonEvent(newtComponent c,
-				      struct event ev);
-static void buttonPlace(newtComponent co, int newLeft, int newTop);
-
-static struct componentOps buttonOps = {
-    buttonDraw,
-    buttonEvent,
-    buttonDestroy,
-    buttonPlace,
-    newtDefaultMappedHandler,
-} ;
-
-static newtComponent createButton(int left, int row, const char * text, int compact) {
-    newtComponent co;
-    struct button * bu;
-
-    co = malloc(sizeof(*co));
-    bu = malloc(sizeof(struct button));
-    co->data = bu;
-
-    bu->text = strdup(text);
-    bu->compact = compact;
-    co->ops = &buttonOps;
-
-    if (bu->compact) {
-	co->height = 1;
-	co->width = strlen(text) + 3;
-    } else {
-	co->height = 4;
-	co->width = strlen(text) + 5;
-    }
-
-    co->top = row;
-    co->left = left;
-    co->takesFocus = 1;
-    co->isMapped = 0;
-
-    newtGotorc(co->top, co->left);
-
-    return co;
-}
-
-newtComponent newtCompactButton(int left, int row, const char * text) {
-    return createButton(left, row, text, 1);
-}
-
-newtComponent newtButton(int left, int row, const char * text) {
-    return createButton(left, row, text, 0);
-}
-
-static void buttonDestroy(newtComponent co) {
-    struct button * bu = co->data;
-
-    free(bu->text);
-    free(bu);
-    free(co);
-}
-
-static void buttonPlace(newtComponent co, int newLeft, int newTop) {
-    co->top = newTop;
-    co->left = newLeft;
-
-    newtGotorc(co->top, co->left);
-}
-
-static void buttonDraw(newtComponent co) {
-    buttonDrawIt(co, 0, 0);
-}
-
-static void buttonDrawIt(newtComponent co, int active, int pushed) {
-    struct button * bu = co->data;
-
-    if (!co->isMapped) return;
-
-    SLsmg_set_color(NEWT_COLORSET_BUTTON);
-
-    if (bu->compact) {
-	if (active)
-	    SLsmg_set_color(NEWT_COLORSET_COMPACTBUTTON);
-	else
-	    SLsmg_set_color(NEWT_COLORSET_BUTTON);
-	newtGotorc(co->top+ pushed, co->left + 1 + pushed);
-	SLsmg_write_char('<');
-	SLsmg_write_string(bu->text);
-	SLsmg_write_char('>');
-    } else {
-	if (pushed) {
-	    SLsmg_set_color(NEWT_COLORSET_BUTTON);
-	    newtDrawBox(co->left + 1, co->top + 1, co->width - 1, 3, 0);
-
-	    SLsmg_set_color(NEWT_COLORSET_WINDOW);
-	    newtClearBox(co->left, co->top, co->width, 1);
-	    newtClearBox(co->left, co->top, 1, co->height);
-	} else {
-	    newtDrawBox(co->left, co->top, co->width - 1, 3, 1);
-	}
-
-	buttonDrawText(co, active, pushed);
-    }
-}
-
-static void buttonDrawText(newtComponent co, int active, int pushed) {
-    struct button * bu = co->data;
-
-    if (pushed) pushed = 1;
-
-    if (active)
-	SLsmg_set_color(NEWT_COLORSET_ACTBUTTON);
-    else
-	SLsmg_set_color(NEWT_COLORSET_BUTTON);
-
-    newtGotorc(co->top + 1 + pushed, co->left + 1 + pushed);
-    SLsmg_write_char(' ');
-    SLsmg_write_string(bu->text);
-    SLsmg_write_char(' ');
-}
-
-static struct eventResult buttonEvent(newtComponent co,
-				      struct event ev) {
-    struct eventResult er;
-    struct button * bu = co->data;
-    er.result = ER_IGNORED;
-    er.u.focus = NULL;
-
-    if (ev.when == EV_NORMAL) {
-	switch (ev.event) {
-	  case EV_FOCUS:
-	    buttonDrawIt(co, 1, 0);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case EV_UNFOCUS:
-	    buttonDrawIt(co, 0, 0);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case EV_KEYPRESS:
-	    if (ev.u.key == ' ' || ev.u.key == '\r') {
-		if (!bu->compact) {
-		    /* look pushed */
-		    buttonDrawIt(co, 1, 1);
-		    newtRefresh();
-		    newtDelay(150000);
-		    buttonDrawIt(co, 1, 0);
-		    newtRefresh();
-		    newtDelay(150000);
-		}
-
-		er.result = ER_EXITFORM;
-	    } else
-		er.result = ER_IGNORED;
-	    break;
-	  case EV_MOUSE:
-	      if (ev.u.mouse.type == MOUSE_BUTTON_DOWN &&
-		  co->top <= ev.u.mouse.y &&
-		  co->top + co->height - !bu->compact > ev.u.mouse.y &&
-		  co->left <= ev.u.mouse.x &&
-		  co->left + co->width - !bu->compact > ev.u.mouse.x) {
-		  if (!bu->compact) {
-		      buttonDrawIt(co, 1, 1);
-		      newtRefresh();
-		      newtDelay(150000);
-		      buttonDrawIt(co, 1, 0);
-		      newtRefresh();
-		      newtDelay(150000);
-		  }
-		  er.result = ER_EXITFORM;
-	      }
-	    break;
-	}
-    } else
-	er.result = ER_IGNORED;
-
-    return er;
-}
diff --git a/mdk-stage1/newt/buttonbar.c b/mdk-stage1/newt/buttonbar.c
deleted file mode 100644
index 45473c9d2..000000000
--- a/mdk-stage1/newt/buttonbar.c
+++ /dev/null
@@ -1,46 +0,0 @@
-#include <stdarg.h>
-
-#include "newt.h"
-
-/* if they try and pack more then 50 buttons, screw 'em */
-newtGrid newtButtonBarv(char * button1, newtComponent * b1comp, va_list args) {
-    newtGrid grid;
-    struct buttonInfo {
-	char * name;
-	newtComponent * compPtr;
-    } buttons[50];
-    int num;
-    int i;
-
-    buttons[0].name = button1, buttons[0].compPtr = b1comp, num = 1;
-    while (1) {
-	buttons[num].name = va_arg(args, char *);
-	if (!buttons[num].name) break;
-	buttons[num].compPtr = va_arg(args, newtComponent *);
-	num++;
-    }
-
-    grid = newtCreateGrid(num, 1);
-
-    for (i = 0; i < num; i++) {
-	*buttons[i].compPtr = newtButton(-1, -1, buttons[i].name);
-	newtGridSetField(grid, i, 0, NEWT_GRID_COMPONENT, 
-			 *buttons[i].compPtr,
-			 num ? 1 : 0, 0, 0, 0, 0, 0);
-    }
-
-    return grid;
-}
-
-newtGrid newtButtonBar(char * button1, newtComponent * b1comp, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, b1comp);
-
-    grid = newtButtonBarv(button1, b1comp, args);
-
-    va_end(args);
- 
-    return grid;
-}
diff --git a/mdk-stage1/newt/checkbox.c b/mdk-stage1/newt/checkbox.c
deleted file mode 100644
index 643609d34..000000000
--- a/mdk-stage1/newt/checkbox.c
+++ /dev/null
@@ -1,292 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-enum type { CHECK, RADIO };
-
-struct checkbox {
-    char * text;
-    char * seq;
-    char * result;
-    newtComponent prevButton, lastButton;
-    enum type type;
-    char value;
-    int active, inactive;
-    const void * data;
-    int flags;
-    int hasFocus;
-};
-
-static void makeActive(newtComponent co);
-
-static void cbDraw(newtComponent c);
-static void cbDestroy(newtComponent co);
-struct eventResult cbEvent(newtComponent co, struct event ev);
-
-static struct componentOps cbOps = {
-    cbDraw,
-    cbEvent,
-    cbDestroy,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-newtComponent newtRadiobutton(int left, int top, const char * text, int isDefault,
-			      newtComponent prevButton) {
-    newtComponent co;
-    newtComponent curr;
-    struct checkbox * rb;
-    char initialValue;
-
-    if (isDefault)
-	initialValue = '*';
-    else
-	initialValue = ' ';
-
-    co = newtCheckbox(left, top, text, initialValue, " *", NULL);
-    rb = co->data;
-    rb->type = RADIO;
-
-    rb->prevButton = prevButton;
-
-    for (curr = co; curr; curr = rb->prevButton) {
-	rb = curr->data;
-	rb->lastButton = co;
-    }
-
-    return co;
-}
-
-newtComponent newtRadioGetCurrent(newtComponent setMember) {
-    struct checkbox * rb = setMember->data;
-
-    setMember = rb->lastButton;
-    rb = setMember->data;
-
-    while (rb && rb->value != '*') {
-	setMember = rb->prevButton;
-	if (!setMember)
-	  return NULL;
-	rb = setMember->data;
-    }
-
-    return setMember;
-}
-
-char newtCheckboxGetValue(newtComponent co) {
-    struct checkbox * cb = co->data;
-
-    return cb->value;
-}
-
-void newtCheckboxSetValue(newtComponent co, char value) {
-    struct checkbox * cb = co->data;
-
-    *cb->result = value;
-    cbDraw(co);
-}
-
-newtComponent newtCheckbox(int left, int top, const char * text, char defValue,
-			   const char * seq, char * result) {
-    newtComponent co;
-    struct checkbox * cb;
-
-    if (!seq) seq = " *";
-
-    co = malloc(sizeof(*co));
-    cb = malloc(sizeof(struct checkbox));
-    co->data = cb;
-    cb->flags = 0;
-    if (result)
-	cb->result = result;
-    else
-	cb->result = &cb->value;
-
-    cb->text = strdup(text);
-    cb->seq = strdup(seq);
-    cb->type = CHECK;
-    cb->hasFocus = 0;
-    cb->inactive = COLORSET_CHECKBOX;
-    cb->active = COLORSET_ACTCHECKBOX;
-    defValue ? (*cb->result = defValue) : (*cb->result = cb->seq[0]);
-
-    co->ops = &cbOps;
-
-    co->callback = NULL;
-    co->height = 1;
-    co->width = strlen(text) + 4;
-    co->top = top;
-    co->left = left;
-    co->takesFocus = 1;
-
-    return co;
-}
-
-void newtCheckboxSetFlags(newtComponent co, int flags, enum newtFlagsSense sense) {
-    struct checkbox * cb = co->data;
-    int row, col;
-
-    cb->flags = newtSetFlags(cb->flags, flags, sense);
-
-    if (!(cb->flags & NEWT_FLAG_DISABLED))
-	co->takesFocus = 1;
-    else
-	co->takesFocus = 0;
-
-    newtGetrc(&row, &col);
-    cbDraw(co);
-    newtGotorc(row, col);
-}
-
-static void cbDraw(newtComponent c) {
-    struct checkbox * cb = c->data;
-
-    if (c->top == -1 || !c->isMapped) return;
-
-    if (cb->flags & NEWT_FLAG_DISABLED) {
-	cb->inactive = NEWT_COLORSET_DISENTRY;
-	cb->active = NEWT_COLORSET_DISENTRY;
-    } else {
-	cb->inactive = COLORSET_CHECKBOX;
-	cb->active = COLORSET_ACTCHECKBOX;
-    }
-
-    SLsmg_set_color(cb->inactive);
-
-    newtGotorc(c->top, c->left);
-
-    switch (cb->type) {
-      case RADIO:
-	SLsmg_write_string("( ) ");
-	break;
-
-      case CHECK:
-	SLsmg_write_string("[ ] ");
-	break;
-
-      default:
-	break;
-    }
-
-    SLsmg_write_string(cb->text);
-
-    if (cb->hasFocus)
-	SLsmg_set_color(cb->active);
-
-    newtGotorc(c->top, c->left + 1);
-    SLsmg_write_char(*cb->result);
-}
-
-static void cbDestroy(newtComponent co) {
-    struct checkbox * cb = co->data;
-
-    free(cb->text);
-    free(cb->seq);
-    free(cb);
-    free(co);
-}
-
-struct eventResult cbEvent(newtComponent co, struct event ev) {
-    struct checkbox * cb = co->data;
-    struct eventResult er;
-    const char * cur;
-    er.result = ER_IGNORED;
-    er.u.focus = NULL;
-
-    if (ev.when == EV_NORMAL) {
-	switch (ev.event) {
-	  case EV_FOCUS:
-	    cb->hasFocus = 1;
-	    cbDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case EV_UNFOCUS:
-	    cb->hasFocus = 0;
-	    cbDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case EV_KEYPRESS:
-	    if (ev.u.key == ' ') {
-		if (cb->type == RADIO) {
-		    makeActive(co);
-		} else if (cb->type == CHECK) {
-		    cur = strchr(cb->seq, *cb->result);
-		    if (!cur)
-			*cb->result = *cb->seq;
-		    else {
-			cur++;
-			if (! *cur)
-			    *cb->result = *cb->seq;
-			else
-			    *cb->result = *cur;
-		    }
-		    cbDraw(co);
-		    er.result = ER_SWALLOWED;
-
-		    if (co->callback)
-			co->callback(co, co->callbackData);
-		} else {
-		    er.result = ER_IGNORED;
-		}
-	    } else if(ev.u.key == NEWT_KEY_ENTER) {
-		er.result = ER_IGNORED;
-	    } else {
-		er.result = ER_IGNORED;
-	    }
-	    break;
-   	  case EV_MOUSE:
-	    if (ev.u.mouse.type == MOUSE_BUTTON_DOWN) {
-		if (cb->type == RADIO) {
-		    makeActive(co);
-		} else if (cb->type == CHECK) {
-		    cur = strchr(cb->seq, *cb->result);
-		    if (!cur)
-			*cb->result = *cb->seq;
-		    else {
-			cur++;
-			if (! *cur)
-			    *cb->result = *cb->seq;
-			else
-			    *cb->result = *cur;
-		    }
-		    cbDraw(co);
-		    er.result = ER_SWALLOWED;
-
-		    if (co->callback)
-			co->callback(co, co->callbackData);
-		}
-	    }
-	}
-    } else
-	er.result = ER_IGNORED;
-
-    return er;
-}
-
-static void makeActive(newtComponent co) {
-    struct checkbox * cb = co->data;
-    struct checkbox * rb;
-    newtComponent curr;
-
-    /* find the one that's turned off */
-    curr = cb->lastButton;
-    rb = curr->data;
-    while (curr && rb->value == rb->seq[0]) {
-	curr = rb->prevButton;
-	if (curr) rb = curr->data;
-    }
-    if (curr) {
-	rb->value = rb->seq[0];
-	cbDraw(curr);
-    }
-    cb->value = cb->seq[1];
-    cbDraw(co);
-
-    if (co->callback)
-	co->callback(co, co->callbackData);
-}
diff --git a/mdk-stage1/newt/checkboxtree.c b/mdk-stage1/newt/checkboxtree.c
deleted file mode 100644
index 00113f23e..000000000
--- a/mdk-stage1/newt/checkboxtree.c
+++ /dev/null
@@ -1,714 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct items {
-    char * text;
-    const void *data;
-    unsigned char selected;
-    struct items *next;
-    struct items *prev;
-    struct items *branch;
-    int flags;
-    int depth;
-};
-
-struct CheckboxTree {
-    newtComponent sb;
-    int curWidth;	/* size of text w/o scrollbar or border*/
-    int curHeight;	/* size of text w/o border */
-    struct items * itemlist;
-    struct items ** flatList, ** currItem, ** firstItem;
-    int flatCount;
-    int flags;
-    int pad;
-    char * seq;
-    char * result;
-};
-
-static void ctDraw(newtComponent c);
-static void ctDestroy(newtComponent co);
-static void ctPlace(newtComponent co, int newLeft, int newTop);
-struct eventResult ctEvent(newtComponent co, struct event ev);
-static void ctMapped(newtComponent co, int isMapped);
-static struct items * findItem(struct items * items, const void * data);
-static void buildFlatList(newtComponent co);
-static void doBuildFlatList(struct CheckboxTree * ct, struct items * item);
-enum countWhat { COUNT_EXPOSED=0, COUNT_SELECTED=1 };
-static int countItems(struct items * item, enum countWhat justExposed);
-
-static struct componentOps ctOps = {
-    ctDraw,
-    ctEvent,
-    ctDestroy,
-    ctPlace,
-    ctMapped,
-} ;
-
-static int countItems(struct items * item, enum countWhat what) {
-    int count = 0;
-
-    while (item) {
-        if ((!item->branch && item->selected == what) || (what == COUNT_EXPOSED))
-	    count++;
-	if (item->branch || (what == COUNT_EXPOSED && item->selected))
-	    count += countItems(item->branch, what);
-	item = item->next;
-    }
-
-    return count;
-}
-
-static void doBuildFlatList(struct CheckboxTree * ct, struct items * item) {
-    while (item) {
-    	ct->flatList[ct->flatCount++] = item;
-	if (item->branch && item->selected) doBuildFlatList(ct, item->branch);
-	item = item->next;
-    }
-}
-
-static void buildFlatList(newtComponent co) {
-    struct CheckboxTree * ct = co->data;
-
-    if (ct->flatList) free(ct->flatList);
-    ct->flatCount = countItems(ct->itemlist, COUNT_EXPOSED);
-
-    ct->flatList = malloc(sizeof(*ct->flatList) * (ct->flatCount+1));
-    ct->flatCount = 0;
-    doBuildFlatList(ct, ct->itemlist);
-    ct->flatList[ct->flatCount] = NULL;
-}
-
-int newtCheckboxTreeAddItem(newtComponent co, 
-			    const char * text, const void * data,
-			    int flags, int index, ...) {
-    va_list argList;
-    int numIndexes;
-    int * indexes;
-    int i;
-
-    va_start(argList, index);
-    numIndexes = 0;
-    i = index;
-    while (i != NEWT_ARG_LAST) {
-	numIndexes++;
-	i = va_arg(argList, int);
-    }
-
-    va_end(argList);
-
-    indexes = alloca(sizeof(*indexes) * (numIndexes + 1));
-    va_start(argList, index);
-    numIndexes = 0;
-    i = index;
-    va_start(argList, index);
-    while (i != NEWT_ARG_LAST) {
-	indexes[numIndexes++] = i;
-	i = va_arg(argList, int);
-    }
-    va_end(argList);
-
-    indexes[numIndexes++] = NEWT_ARG_LAST;
-
-    return newtCheckboxTreeAddArray(co, text, data, flags, indexes);
-}
-
-static int doFindItemPath(struct items * items, void * data, int * path, 
-			  int * len) {
-    int where = 0;
-
-    while (items) {
-	if (items->data == data) {
-	    if (path) path[items->depth] = where;
-	    if (len) *len = items->depth + 1;
-	    return 1;
-	}
-
-	if (items->branch && doFindItemPath(items->branch, data, path, len)) {
-	    if (path) path[items->depth] = where;
-	    return 1;
-	}
-
-	items = items->next;
-	where++;
-    }
-
-    return 0;
-}
-
-int * newtCheckboxTreeFindItem(newtComponent co, void * data) {
-    int len;
-    int * path;
-    struct CheckboxTree * ct = co->data;
-
-    if (!doFindItemPath(ct->itemlist, data, NULL, &len)) return NULL;
-
-    path = malloc(sizeof(*path) * (len + 1));
-    doFindItemPath(ct->itemlist, data, path, NULL);
-    path[len] = NEWT_ARG_LAST;
-
-    return path;
-}
-
-int newtCheckboxTreeAddArray(newtComponent co, 
-			    const char * text, const void * data,
-			    int flags, int * indexes) {
-    struct items * curList, * newNode, * item = NULL;
-    struct items ** listPtr = NULL;
-    int i, index, numIndexes;
-    struct CheckboxTree * ct = co->data;
-
-    numIndexes = 0;
-    while (indexes[numIndexes] != NEWT_ARG_LAST) numIndexes++;
-
-    if (!ct->itemlist) {
-	if (numIndexes > 1) return -1;
-
-    	ct->itemlist = malloc(sizeof(*ct->itemlist));
-    	item = ct->itemlist;
-	item->prev = NULL;
-	item->next = NULL;
-    } else {
-	curList = ct->itemlist;
-	listPtr = &ct->itemlist;
-
-	i = 0;
-	index = indexes[i];
-	while (i < numIndexes) {
-	    item = curList;
-
-	    if (index == NEWT_ARG_APPEND) {
-	    	item = NULL;
-	    } else {
-		while (index && item) 
-		    item = item->next, index--;
-	    }
-
-	    i++;
-	    if (i < numIndexes) {
-		curList = item->branch;
-		listPtr = &item->branch;
-		if (!curList && (i + 1 != numIndexes)) return -1;
-
-		index = indexes[i];
-	    }
-	}
-
-	if (!curList) { 			/* create a new branch */
-	    item = malloc(sizeof(*curList->prev));
-	    item->next = item->prev = NULL;
-	    *listPtr = item;
-	} else if (!item) {			/* append to end */
-	    item = curList;
-	    while (item->next) item = item->next;
-	    item->next = malloc(sizeof(*curList->prev));
-	    item->next->prev = item;
-	    item = item->next;
-	    item->next = NULL;
-	} else { 
-	    newNode = malloc(sizeof(*newNode));
-	    newNode->prev = item->prev;
-	    newNode->next = item;
-
-	    if (item->prev) item->prev->next = newNode;
-	    item->prev = newNode;
-	    item = newNode;
-	    if (!item->prev) *listPtr = item;
-	}
-    }
-    	
-    item->text = strdup(text);
-    item->data = data;
-    if (flags & NEWT_FLAG_SELECTED) {
-    	item->selected = 1;
-    } else {
-	item->selected = 0;
-    }
-    item->flags = flags;
-    item->branch = NULL;
-    item->depth = numIndexes - 1;
-
-    i = 4 + (3 * item->depth);
-
-    if ((strlen(text) + i + ct->pad) > (size_t)co->width) {
-	co->width = strlen(text) + i + ct->pad;
-    }
-
-    return 0;
-}
-
-static struct items * findItem(struct items * items, const void * data) {
-    struct items * i;
-
-    while (items) {
-	if (items->data == data) return items;
-    	if (items->branch) {
-	    i = findItem(items->branch, data);
-	    if (i) return i;
-	}
-
-	items = items->next;
-    }
-
-    return NULL;
-}
-
-static void listSelected(struct items * items, int * num, const void ** list, int seqindex) {
-    while (items) {
-	    if ((seqindex ? items->selected==seqindex : items->selected) && !items->branch)
-	    list[(*num)++] = (void *) items->data;
-	if (items->branch)
-	    listSelected(items->branch, num, list, seqindex);
-	items = items->next;
-    }
-}
-
-const void ** newtCheckboxTreeGetSelection(newtComponent co, int *numitems)
-{
-    return newtCheckboxTreeGetMultiSelection(co, numitems, 0);
-}
-
-const void ** newtCheckboxTreeGetMultiSelection(newtComponent co, int *numitems, char seqnum)
-{
-    struct CheckboxTree * ct;
-    const void **retval;
-    int seqindex=0;
-
-    if(!co || !numitems) return NULL;
-
-    ct = co->data;
-	
-    if (seqnum) {
-	    while( ct->seq[seqindex] && ( ct->seq[seqindex] != seqnum )) seqindex++;
-    } else {
-	    seqindex = 0;
-    }
-
-    *numitems = countItems(ct->itemlist, (seqindex ? seqindex : COUNT_SELECTED));
-    if (!*numitems) return NULL;
-    
-    retval = malloc(*numitems * sizeof(void *));
-    *numitems = 0;
-    listSelected(ct->itemlist, numitems, retval, seqindex);
-
-    return retval;
-}
-
-newtComponent newtCheckboxTree(int left, int top, int height, int flags) {
-	return newtCheckboxTreeMulti(left, top, height, NULL, flags);
-}
-
-newtComponent newtCheckboxTreeMulti(int left, int top, int height, char *seq, int flags) {
-    newtComponent co;
-    struct CheckboxTree * ct;
-
-    co = malloc(sizeof(*co));
-    ct = malloc(sizeof(struct CheckboxTree));
-    co->callback = NULL;
-    co->data = ct;
-    co->ops = &ctOps;
-    co->takesFocus = 1;
-    co->height = height;
-    co->width = 0;
-    co->isMapped = 0;
-    ct->itemlist = NULL;
-    ct->firstItem = NULL;
-    ct->currItem = NULL;
-    ct->flatList = NULL;
-	if (seq)
-	  ct->seq = strdup(seq);
-	else
-	  ct->seq = strdup(" *");
-    if (flags & NEWT_FLAG_SCROLL) {
-	ct->sb = newtVerticalScrollbar(left, top, height,
-				       COLORSET_LISTBOX, COLORSET_ACTLISTBOX);
-	ct->pad = 2;
-    } else {
-	ct->sb = NULL;
-	ct->pad = 0;
-    }
-    
-    return co;
-}
-
-static void ctMapped(newtComponent co, int isMapped) {
-    struct CheckboxTree * ct = co->data;
-
-    co->isMapped = isMapped;
-    if (ct->sb)
-	ct->sb->ops->mapped(ct->sb, isMapped);
-}
-
-static void ctPlace(newtComponent co, int newLeft, int newTop) {
-    struct CheckboxTree * ct = co->data;
-
-    co->top = newTop;
-    co->left = newLeft;
-
-    if (ct->sb)
-	ct->sb->ops->place(ct->sb, co->left + co->width - 1, co->top);
-}
-
-int ctSetItem(newtComponent co, struct items *item, enum newtFlagsSense sense)
-{
-    struct CheckboxTree * ct = co->data;
-    struct items * currItem;
-    struct items * firstItem;
-    
-    if (!item)
-	return 1;
-    
-    switch(sense) {
-	case NEWT_FLAGS_RESET:
-	    item->selected = 0;
-	    break;
-	case NEWT_FLAGS_SET:
-	    item->selected = 1;
-	    break;
-	case NEWT_FLAGS_TOGGLE:
-	    if (item->branch)
-	      item->selected = !item->selected;
-	    else {
-		    item->selected++;
-		    if (item->selected==strlen(ct->seq))
-		      item->selected = 0;
-	    }
-	    break;
-    }
-
-    if (item->branch) {
-    	currItem = *ct->currItem;
-	firstItem = *ct->firstItem;
-
-    	buildFlatList(co);
-
-    	ct->currItem = ct->flatList;
-	while (*ct->currItem != currItem) ct->currItem++;
-
-    	ct->firstItem = ct->flatList;
-    	if (ct->flatCount > co->height) {
-		struct items ** last = ct->flatList + ct->flatCount - co->height;
-		while (*ct->firstItem != firstItem && ct->firstItem != last)
-		    ct->firstItem++;
-	}
-    }
-
-    return 0;
-}
-
-static void ctSetItems(struct items *item, int selected)
-{
-    for (; item; item = item->next) {
-	if (!item->branch)
-	    item->selected = selected;
-	else
-	    ctSetItems(item->branch, selected);
-    }
-}
-
-static void ctDraw(newtComponent co) {
-    struct CheckboxTree * ct = co->data;
-    struct items ** item; 
-    int i, j;
-    char * spaces = NULL;
-    int currRow = -1;
-
-    if (!co->isMapped) return ;
-
-    if (!ct->firstItem) {
-	buildFlatList(co);
-	ct->firstItem = ct->currItem = ct->flatList;
-    }
-
-    item = ct->firstItem;
-    
-    i = 0;
-    while (*item && i < co->height) {
-	newtGotorc(co->top + i, co->left);
-	if (*item == *ct->currItem) {
-	    SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
-	    currRow = co->top + i;
-	} else
-	    SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
-	for (j = 0; j < (*item)->depth; j++)
-	    SLsmg_write_string("   ");
-
-	if ((*item)->branch) {
-	    if ((*item)->selected) 
-		SLsmg_write_string("<-> ");
-	    else
-		SLsmg_write_string("<+> ");
-	} else {
-	    char tmp[5];
-	    snprintf(tmp,5,"[%c] ",ct->seq[(*item)->selected]);
-	    SLsmg_write_string(tmp);
-	}
-
-	SLsmg_write_nstring((*item)->text, co->width - 4 - 
-					   (3 * (*item)->depth));
-	item++;
-	i++;
-    }
-
-    /* There could be empty lines left (i.e. if the user closes an expanded
-       list which is the last thing in the tree, and whose elements are
-       displayed at the bottom of the screen */
-    if (i < co->height) {
-	spaces = alloca(co->width);
-	memset(spaces, ' ', co->width);
-	SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-    }
-    while (i < co->height) {
-	newtGotorc(co->top + i, co->left);
-	SLsmg_write_nstring(spaces, co->width);
-	i++;
-    }
-    
-    if(ct->sb) {
-	newtScrollbarSet(ct->sb, ct->currItem - ct->flatList, 
-			 ct->flatCount - 1);
-	ct->sb->ops->draw(ct->sb);
-    }
-
-    newtGotorc(currRow, co->left + 1);
-}
-
-static void ctDestroy(newtComponent co) {
-    struct CheckboxTree * ct = co->data;
-    struct items * item, * nextitem;
-
-    nextitem = item = ct->itemlist;
-
-    while (item != NULL) {
-	nextitem = item->next;
-	free(item->text);
-	free(item);
-	item = nextitem;
-    }
-
-    free(ct->seq);
-    free(ct);
-    free(co);
-}
-
-struct eventResult ctEvent(newtComponent co, struct event ev) {
-    struct CheckboxTree * ct = co->data;
-    struct eventResult er;
-    struct items ** listEnd, ** lastItem;
-    int key, selnum = 1;
-
-    er.result = ER_IGNORED;
-
-    if(ev.when == EV_EARLY || ev.when == EV_LATE) {
-	return er;
-    }
-
-    switch(ev.event) {
-    case EV_KEYPRESS:
-	key = ev.u.key;
-	if (key == (char) key && key != ' ') {
-	    for (selnum = 0; ct->seq[selnum]; selnum++)
-	    if (key == ct->seq[selnum])
-		break;
-	    if (!ct->seq[selnum])
-		switch (key) {
-		case '-': selnum = 0; break;
-		case '+':
-		case '*': selnum = 1; break;
-		}
-	    if (ct->seq[selnum])
-		key = '*';
-	}
-	switch(key) {
-	case ' ':
-	case NEWT_KEY_ENTER:
-	    ctSetItem(co, *ct->currItem, NEWT_FLAGS_TOGGLE);
-	    er.result = ER_SWALLOWED;
-	    if (!(*ct->currItem)->branch || (*ct->currItem)->selected)
-		key = NEWT_KEY_DOWN;
-	    else
-		key = '*';
-	    break;
-	case '*':
-	    if ((*ct->currItem)->branch) {
-		ctSetItems((*ct->currItem)->branch, selnum);
-		if (!(*ct->currItem)->selected)
-		    key = NEWT_KEY_DOWN;
-	    } else {
-		(*ct->currItem)->selected = selnum;
-		key = NEWT_KEY_DOWN;
-	    }
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-	switch (key) {
-	case '*':
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    return er;
-	case NEWT_KEY_HOME:
-	    ct->currItem = ct->flatList;
-	    ct->firstItem = ct->flatList;
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	case NEWT_KEY_END:
-	    ct->currItem = ct->flatList + ct->flatCount - 1;
-	    if (ct->flatCount <= co->height)
-		ct->firstItem = ct->flatList;
-	    else
-		ct->firstItem = ct->flatList + ct->flatCount - co->height;
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	case NEWT_KEY_DOWN:
-	    if (ev.u.key != NEWT_KEY_DOWN) {
-		if(co->callback) co->callback(co, co->callbackData);
-		if (strlen(ct->seq) != 2) {
-		    ctDraw(co);
-		    return er;
-		}
-	    }
-	    if ((ct->currItem - ct->flatList + 1) < ct->flatCount) {
-		ct->currItem++;
-
-		if (ct->currItem - ct->firstItem >= co->height) 
-		    ct->firstItem++;
-
-		ctDraw(co);
-	    } else if (ev.u.key != NEWT_KEY_DOWN)
-	        ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	case NEWT_KEY_UP:
-	    if (ct->currItem != ct->flatList) {
-		ct->currItem--;
-
-		if (ct->currItem < ct->firstItem)
-		    ct->firstItem = ct->currItem;
-		    
-		ctDraw(co);
-	    }
-	    er.result = ER_SWALLOWED;
-	    if(co->callback) co->callback(co, co->callbackData);
-	    return er;
-	case NEWT_KEY_PGUP:
-	    if (ct->firstItem - co->height < ct->flatList) {
-	    	ct->firstItem = ct->currItem = ct->flatList;
-	    } else {
-		ct->currItem -= co->height;
-		ct->firstItem -= co->height;
-	    }
-
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	case NEWT_KEY_PGDN:
-	    listEnd = ct->flatList + ct->flatCount - 1;
-	    lastItem = ct->firstItem + co->height - 1;
-
-	    if (lastItem + co->height > listEnd) {
-	    	ct->firstItem = listEnd - co->height + 1;
-		ct->currItem = listEnd;
-	    } else {
-	    	ct->currItem += co->height;
-		ct->firstItem += co->height;
-	    }
-
-	    ctDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    return er;
-	}
-	break;
-
-    case EV_FOCUS:
-	ctDraw(co);
-	er.result = ER_SWALLOWED;
-	break;
-	
-    case EV_UNFOCUS:
-	ctDraw(co);
-	er.result = ER_SWALLOWED;
-	break;
-    default:
-	break;
-    }
-
-    return er;
-}
-
-const void * newtCheckboxTreeGetCurrent(newtComponent co) {
-    struct CheckboxTree * ct = co->data;
-
-    if (!ct->currItem) return NULL;
-    return (*ct->currItem)->data;
-}
-
-void newtCheckboxTreeSetEntry(newtComponent co, const void * data, const char * text)
-{
-    struct CheckboxTree * ct;
-    struct items * item;
-    int i;
-
-    if (!co) return;
-    ct = co->data;
-    item = findItem(ct->itemlist, data);
-    if (!item) return;
-
-    free(item->text);
-    item->text = strdup(text);
-
-    i = 4 + (3 * item->depth);
-
-    if ((strlen(text) + i + ct->pad) > (size_t)co->width) {
-	co->width = strlen(text) + i + ct->pad;
-    }
-
-    ctDraw(co);
-}
-
-char newtCheckboxTreeGetEntryValue(newtComponent co, const void * data)
-{
-    struct CheckboxTree * ct;
-    struct items * item;
-
-    if (!co) return -1;
-    ct = co->data;
-    item = findItem(ct->itemlist, data);
-    if (!item) return -1;
-    if (item->branch)
-	return item->selected ? NEWT_CHECKBOXTREE_EXPANDED : NEWT_CHECKBOXTREE_COLLAPSED;
-    else
-	return ct->seq[item->selected];
-}
-
-void newtCheckboxTreeSetEntryValue(newtComponent co, const void * data, char value)
-{
-    struct CheckboxTree * ct;
-    struct items * item;
-    int i;
-
-    if (!co) return;
-    ct = co->data;
-    item = findItem(ct->itemlist, data);
-    if (!item || item->branch) return;
-
-    for(i = 0; ct->seq[i]; i++)
-	if (value == ct->seq[i])
-	    break;
-
-    if (!ct->seq[i]) return;
-    item->selected = i;
-
-    ctDraw(co);
-}
-
diff --git a/mdk-stage1/newt/entry.c b/mdk-stage1/newt/entry.c
deleted file mode 100644
index 0ee449cf9..000000000
--- a/mdk-stage1/newt/entry.c
+++ /dev/null
@@ -1,378 +0,0 @@
-#include <ctype.h>
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct entry {
-    int flags;
-    char * buf;
-    char ** resultPtr;
-    int bufAlloced;
-    int bufUsed;		/* amount of the buffer that's been used */
-    int cursorPosition; 	/* cursor *in the string* on on screen */
-    int firstChar;		/* first character position being shown */
-    newtEntryFilter filter;
-    void * filterData;
-};
-
-static void entryDraw(newtComponent co);
-static void entryDestroy(newtComponent co);
-static struct eventResult entryEvent(newtComponent co,
-			             struct event ev);
-
-static struct eventResult entryHandleKey(newtComponent co, int key);
-
-static struct componentOps entryOps = {
-    entryDraw,
-    entryEvent,
-    entryDestroy,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-void newtEntrySet(newtComponent co, const char * value, int cursorAtEnd) {
-    struct entry * en = co->data;
-
-    if ((strlen(value) + 1) > (unsigned int)en->bufAlloced) {
-	free(en->buf);
-	en->bufAlloced = strlen(value) + 1;
-	en->buf = malloc(en->bufAlloced);
-	if (en->resultPtr) *en->resultPtr = en->buf;
-    }
-    memset(en->buf, 0, en->bufAlloced);		/* clear the buffer */
-    strcpy(en->buf, value);
-    en->bufUsed = strlen(value);
-    en->firstChar = 0;
-    if (cursorAtEnd)
-	en->cursorPosition = en->bufUsed;
-    else
-	en->cursorPosition = 0;
-
-    entryDraw(co);
-} ;
-
-newtComponent newtEntry(int left, int top, const char * initialValue, int width,
-			char ** resultPtr, int flags) {
-    newtComponent co;
-    struct entry * en;
-
-    co = malloc(sizeof(*co));
-    en = malloc(sizeof(struct entry));
-    co->data = en;
-
-    co->top = top;
-    co->left = left;
-    co->height = 1;
-    co->width = width;
-    co->isMapped = 0;
-    co->callback = NULL;
-
-    co->ops = &entryOps;
-
-    en->flags = flags;
-    en->cursorPosition = 0;
-    en->firstChar = 0;
-    en->bufUsed = 0;
-    en->bufAlloced = width + 1;
-    en->filter = NULL;
-
-    if (!(en->flags & NEWT_FLAG_DISABLED))
-	co->takesFocus = 1;
-    else
-	co->takesFocus = 0;
-
-    if (initialValue && strlen(initialValue) > (unsigned int)width) {
-	en->bufAlloced = strlen(initialValue) + 1;
-    }
-    en->buf = malloc(en->bufAlloced);
-    en->resultPtr = resultPtr;
-    if (en->resultPtr) *en->resultPtr = en->buf;
-
-    memset(en->buf, 0, en->bufAlloced);
-    if (initialValue) {
-	strcpy(en->buf, initialValue);
-	en->bufUsed = strlen(initialValue);
-	en->cursorPosition = en->bufUsed;
-    } else {
-	*en->buf = '\0';
-	en->bufUsed = 0;
-	en->cursorPosition = 0;
-    }
-
-    return co;
-}
-
-static void entryDraw(newtComponent co) {
-    struct entry * en = co->data;
-    int i;
-    char * chptr;
-    int len;
-
-    if (!co->isMapped) return;
-
-    if (en->flags & NEWT_FLAG_DISABLED)
-	SLsmg_set_color(NEWT_COLORSET_DISENTRY);
-    else
-	SLsmg_set_color(NEWT_COLORSET_ENTRY);
-
-    if (en->flags & NEWT_FLAG_HIDDEN) {
-	newtGotorc(co->top, co->left);
-	for (i = 0; i < co->width; i++)
-	    SLsmg_write_char('_');
-	newtGotorc(co->top, co->left);
-
-	return;
-    }
-
-    newtGotorc(co->top, co->left);
-
-    if (en->cursorPosition < en->firstChar) {
-	/* scroll to the left */
-	en->firstChar = en->cursorPosition;
-    } else if ((en->firstChar + co->width) <= en->cursorPosition) {
-	/* scroll to the right */
-	en->firstChar = en->cursorPosition - co->width + 1;
-    }
-
-    chptr = en->buf + en->firstChar;
-
-    if (en->flags & NEWT_FLAG_PASSWORD) {
-	char *tmpptr, *p;
-
-	tmpptr = alloca(strlen(chptr+2));
-	strcpy(tmpptr, chptr);
-	for (p = tmpptr; *p; p++)
-	    *p = '*';
-	chptr = tmpptr;
-    }			
-
-    len = strlen(chptr);
-
-    if (len <= co->width) {
-	i = len;
-	SLsmg_write_string(chptr);
-	while (i < co->width) {
-	    SLsmg_write_char('_');
-	    i++;
-	}
-    } else {
-	SLsmg_write_nstring(chptr, co->width);
-    }
-
-    if (en->flags & NEWT_FLAG_HIDDEN)
-	newtGotorc(co->top, co->left);
-    else
-	newtGotorc(co->top, co->left + (en->cursorPosition - en->firstChar));
-}
-
-void newtEntrySetFlags(newtComponent co, int flags, enum newtFlagsSense sense) {
-    struct entry * en = co->data;
-    int row, col;
-
-    en->flags = newtSetFlags(en->flags, flags, sense);
-
-    if (!(en->flags & NEWT_FLAG_DISABLED))
-	co->takesFocus = 1;
-    else
-	co->takesFocus = 0;
-
-    newtGetrc(&row, &col);
-    entryDraw(co);
-    newtGotorc(row, col);
-}
-
-static void entryDestroy(newtComponent co) {
-    struct entry * en = co->data;
-
-    free(en->buf);
-    free(en);
-    free(co);
-}
-
-static struct eventResult entryEvent(newtComponent co,
-				     struct event ev) {
-    struct entry * en = co->data;
-    struct eventResult er;
-    int ch;
-    er.result = ER_IGNORED;
-    er.u.focus = NULL;
-
-    if (ev.when == EV_NORMAL) {
-	switch (ev.event) {
-	case EV_FOCUS:
-	    newtCursorOn();
-	    if (en->flags & NEWT_FLAG_HIDDEN)
-		newtGotorc(co->top, co->left);
-	    else
-		newtGotorc(co->top, co->left +
-			   (en->cursorPosition - en->firstChar));
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	case EV_UNFOCUS:
-	    newtCursorOff();
-	    newtGotorc(0, 0);
-	    er.result = ER_SWALLOWED;
-	    if (co->callback)
-		co->callback(co, co->callbackData);
-	    break;
-
-	case EV_KEYPRESS:
-	    ch = ev.u.key;
-	    if (en->filter)
-		ch = en->filter(co, en->filterData, ch, en->cursorPosition);
-	    if (ch) er = entryHandleKey(co, ch);
-	    break;
-
-	case EV_MOUSE:
-	    if ((ev.u.mouse.type == MOUSE_BUTTON_DOWN) &&
-		(en->flags ^ NEWT_FLAG_HIDDEN)) {
-		if (strlen(en->buf) >= (size_t) (ev.u.mouse.x - co->left)) {
-		    en->cursorPosition = ev.u.mouse.x - co->left;
-		    newtGotorc(co->top,
-			       co->left +(en->cursorPosition - en->firstChar));
-		} else {
-		    en->cursorPosition = strlen(en->buf);
-		    newtGotorc(co->top,
-			       co->left +(en->cursorPosition - en->firstChar));
-		}
-	    }
-	    break;
-	}
-    } else
-	er.result = ER_IGNORED;
-
-    return er;
-}
-
-static struct eventResult entryHandleKey(newtComponent co, int key) {
-    struct entry * en = co->data;
-    struct eventResult er;
-    char * chptr, * insPoint;
-
-    er.result = ER_SWALLOWED;
-    switch (key) {
-      case '\r':				/* Return */
-	if (en->flags & NEWT_FLAG_RETURNEXIT) {
-	    er.result = ER_EXITFORM;
-	} else {
-	    er.result = ER_NEXTCOMP;
-	}
-	break;
-
-      case '\001':				/* ^A */
-      case NEWT_KEY_HOME:
-	en->cursorPosition = 0;
-	break;
-
-      case '\005':				/* ^E */
-      case NEWT_KEY_END:
-	en->cursorPosition = en->bufUsed;
-	break;
-
-      case '\013':				/* ^K */
-	en->bufUsed = en->cursorPosition;
-	memset(en->buf + en->bufUsed, 0, en->bufAlloced - en->bufUsed);
-	break;
-
-      case '\002':				/* ^B */
-      case NEWT_KEY_LEFT:
-	if (en->cursorPosition)
-	    en->cursorPosition--;
-	break;
-
-      case '\004':
-      case NEWT_KEY_DELETE:
-	chptr = en->buf + en->cursorPosition;
-	if (*chptr) {
-	    chptr++;
-	    while (*chptr) {
-		*(chptr - 1) = *chptr;
-		chptr++;
-	    }
-	    *(chptr - 1) = '\0';
-	    en->bufUsed--;
-	}
-	break;
-
-      case NEWT_KEY_BKSPC:
-	if (en->cursorPosition) {
-	    /* if this isn't true, there's nothing to erase */
-	    chptr = en->buf + en->cursorPosition;
-	    en->bufUsed--;
-	    en->cursorPosition--;
-	    while (*chptr) {
-		*(chptr - 1) = *chptr;
-		chptr++;
-	    }
-	    *(chptr - 1) = '\0';
-	}
-	break;
-
-      case '\006':				/* ^B */
-      case NEWT_KEY_RIGHT:
-	if (en->cursorPosition < en->bufUsed)
-	    en->cursorPosition++;
-	break;
-
-      default:
-	if ((key >= 0x20 && key <= 0x7e) || (key >= 0xa0 && key <= 0xff)) {
-	    if (!(en->flags & NEWT_FLAG_SCROLL) && en->bufUsed >= co->width) {
-		SLtt_beep();
-		break;
-	    }
-
-	    if ((en->bufUsed + 1) == en->bufAlloced) {
-		en->bufAlloced += 20;
-		en->buf = realloc(en->buf, en->bufAlloced);
-		if (en->resultPtr) *en->resultPtr = en->buf;
-		memset(en->buf + en->bufUsed + 1, 0, 20);
-	    }
-
-	    if (en->cursorPosition == en->bufUsed) {
-		en->bufUsed++;
-	    } else {
-		/* insert the new character */
-
-		/* chptr is the last character in the string */
-		chptr = (en->buf + en->bufUsed) - 1;
-		if ((en->bufUsed + 1) == en->bufAlloced) {
-		    /* this string fills the buffer, so clip it */
-		    chptr--;
-		} else
-		    en->bufUsed++;
-
-		insPoint = en->buf + en->cursorPosition;
-
-		while (chptr >= insPoint) {
-		    *(chptr + 1) = *chptr;
-		    chptr--;
-		}
-
-	    }
-
-	    en->buf[en->cursorPosition++] = key;
-	} else {
-	    er.result = ER_IGNORED;
-	}
-    }
-
-    entryDraw(co);
-
-    return er;
-}
-
-char * newtEntryGetValue(newtComponent co) {
-    struct entry * en = co->data;
-
-    return en->buf;
-}
-
-void newtEntrySetFilter(newtComponent co, newtEntryFilter filter, void * data) {
-    struct entry * en = co->data;
-    en->filter = filter;
-    en->filterData = data;
-}
diff --git a/mdk-stage1/newt/form.c b/mdk-stage1/newt/form.c
deleted file mode 100644
index ad7520e95..000000000
--- a/mdk-stage1/newt/form.c
+++ /dev/null
@@ -1,713 +0,0 @@
-#include <unistd.h>
-#include <slang.h>
-#include <stdarg.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/time.h>
-#include <sys/types.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-
-/****************************************************************************
-    These forms handle vertical scrolling of components with a height of 1
-
-    Horizontal scrolling won't work, and scrolling large widgets will fail
-    miserably. It shouldn't be too hard to fix either of those if anyone
-    cares to. I only use scrolling for listboxes and text boxes though so
-    I didn't bother.
-*****************************************************************************/
-
-struct element {
-    int top, left;		/* Actual, not virtual. These are translated */
-    newtComponent co;		/* into actual through vertOffset */
-};
-
-struct fdInfo {
-    int fd;
-    int flags;
-};
-
-struct form {
-    int numCompsAlloced;
-    struct element * elements;
-    int numComps;
-    int currComp;
-    int fixedHeight;
-    int flags;
-    int vertOffset;
-    newtComponent vertBar, exitComp;
-    const char * help;
-    int numRows;
-    int * hotKeys;
-    int numHotKeys;
-    int background;
-    int beenSet;
-    int numFds;
-    struct fdInfo * fds;
-    int maxFd;
-    int timer;    /* in milliseconds */
-    struct timeval lastTimeout;
-    void * helpTag;
-    newtCallback helpCb;
-};
-
-static void gotoComponent(struct form * form, int newComp);
-static struct eventResult formEvent(newtComponent co, struct event ev);
-static struct eventResult sendEvent(newtComponent comp, struct event ev);
-static void formPlace(newtComponent co, int left, int top);
-
-/* Global, ick */
-static newtCallback helpCallback;
-
-/* this isn't static as grid.c tests against it to find forms */
-struct componentOps formOps = {
-    newtDrawForm,
-    formEvent,
-    newtFormDestroy,
-    formPlace,
-    newtDefaultMappedHandler,
-} ;
-
-static inline int componentFits(newtComponent co, int compNum) {
-    struct form * form = co->data;
-    struct element * el = form->elements + compNum;
-
-    if ((co->top + form->vertOffset) > el->top) return 0;
-    if ((co->top + form->vertOffset + co->height) <
-	    (el->top + el->co->height)) return 0;
-
-    return 1;
-}
-
-newtComponent newtForm(newtComponent vertBar, void * help, int flags) {
-    newtComponent co;
-    struct form * form;
-
-    co = malloc(sizeof(*co));
-    form = malloc(sizeof(*form));
-    co->data = form;
-    co->width = 0;
-    co->height = 0;
-    co->top = -1;
-    co->left = -1;
-    co->isMapped = 0;
-
-    co->takesFocus = 0;			/* we may have 0 components */
-    co->ops = &formOps;
-
-    form->help = help;
-    form->flags = flags;
-    form->numCompsAlloced = 5;
-    form->numComps = 0;
-    form->currComp = -1;
-    form->vertOffset = 0;
-    form->fixedHeight = 0;
-    form->numRows = 0;
-    form->numFds = 0;
-    form->maxFd = 0;
-    form->fds = NULL;
-    form->beenSet = 0;
-    form->elements = malloc(sizeof(*(form->elements)) * form->numCompsAlloced);
-
-    form->background = COLORSET_WINDOW;
-    form->hotKeys = malloc(sizeof(int));
-    form->numHotKeys = 0;
-    form->timer = 0;
-    form->lastTimeout.tv_sec = form->lastTimeout.tv_usec = 0;
-    if (!(form->flags & NEWT_FLAG_NOF12)) {
-	newtFormAddHotKey(co, NEWT_KEY_F12);
-    }
-
-    if (vertBar)
-	form->vertBar = vertBar;
-    else
-	form->vertBar = NULL;
-
-    form->helpTag = help;
-    form->helpCb = helpCallback;
-
-    return co;
-}
-
-newtComponent newtFormGetCurrent(newtComponent co) {
-    struct form * form = co->data;
-
-    return form->elements[form->currComp].co;
-}
-
-void newtFormSetCurrent(newtComponent co, newtComponent subco) {
-    struct form * form = co->data;
-    int i, new;
-
-    for (i = 0; i < form->numComps; i++) {
-	 if (form->elements[i].co == subco) break;
-    }
-
-    if (form->elements[i].co != subco) return;
-    new = i;
-
-    if (co->isMapped && !componentFits(co, new)) {
-	gotoComponent(form, -1);
-	form->vertOffset = form->elements[new].top - co->top - 1;
-	if (form->vertOffset > (form->numRows - co->height))
-	    form->vertOffset = form->numRows - co->height;
-    }
-
-    gotoComponent(form, new);
-}
-
-void newtFormSetTimer(newtComponent co, int millisecs) {
-    struct form * form = co->data;
-
-    form->timer = millisecs;
-    form->lastTimeout.tv_usec = 0;
-    form->lastTimeout.tv_sec = 0;
-}
-
-void newtFormSetHeight(newtComponent co, int height) {
-    struct form * form = co->data;
-
-    form->fixedHeight = 1;
-    co->height = height;
-}
-
-void newtFormSetWidth(newtComponent co, int width) {
-    co->width = width;
-}
-
-void newtFormAddComponent(newtComponent co, newtComponent newco) {
-    struct form * form = co->data;
-
-    co->takesFocus = 1;
-
-    if (form->numCompsAlloced == form->numComps) {
-	form->numCompsAlloced += 5;
-	form->elements = realloc(form->elements,
-			    sizeof(*(form->elements)) * form->numCompsAlloced);
-    }
-
-    /* we grab real values for these a bit later */
-    form->elements[form->numComps].left = -2;
-    form->elements[form->numComps].top = -2;
-    form->elements[form->numComps].co = newco;
-
-    if (newco->takesFocus && form->currComp == -1)
-	form->currComp = form->numComps;
-
-    form->numComps++;
-}
-
-void newtFormAddComponents(newtComponent co, ...) {
-    va_list ap;
-    newtComponent subco;
-
-    va_start(ap, co);
-
-    while ((subco = va_arg(ap, newtComponent)))
-	newtFormAddComponent(co, subco);
-
-    va_end(ap);
-}
-
-static void formPlace(newtComponent co, int left, int top) {
-    struct form * form = co->data;
-    int vertDelta, horizDelta;
-    struct element * el;
-    int i;
-
-    newtFormSetSize(co);
-
-    vertDelta = top - co->top;
-    horizDelta = left - co->left;
-    co->top = top;
-    co->left = left;
-
-    for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
-	el->co->top += vertDelta;
-	el->top += vertDelta;
-	el->co->left += horizDelta;
-	el->left += horizDelta;
-    }
-}
-
-void newtDrawForm(newtComponent co) {
-    struct form * form = co->data;
-    struct element * el;
-    int i;
-
-    newtFormSetSize(co);
-
-    SLsmg_set_color(form->background);
-    newtClearBox(co->left, co->top, co->width, co->height);
-    for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
-	/* the scrollbar *always* fits somewhere */
-	if (el->co == form->vertBar) {
-	    el->co->ops->mapped(el->co, 1);
-	    el->co->ops->draw(el->co);
-	} else {
-	    /* only draw it if it'll fit on the screen vertically */
-	    if (componentFits(co, i)) {
-		el->co->top = el->top - form->vertOffset;
-		el->co->ops->mapped(el->co, 1);
-		el->co->ops->draw(el->co);
-	    } else {
-		el->co->ops->mapped(el->co, 0);
-	    }
-	}
-    }
-
-    if (form->vertBar)
-	newtScrollbarSet(form->vertBar, form->vertOffset,
-			 form->numRows - co->height);
-}
-
-static struct eventResult formEvent(newtComponent co, struct event ev) {
-    struct form * form = co->data;
-    newtComponent subco = form->elements[form->currComp].co;
-    int new, wrap = 0;
-    struct eventResult er;
-    int dir = 0, page = 0;
-    int i, num, found;
-    struct element * el;
-
-    er.result = ER_IGNORED;
-    if (!form->numComps) return er;
-
-    subco = form->elements[form->currComp].co;
-
-    switch (ev.when) {
-      case EV_EARLY:
-	  if (ev.event == EV_KEYPRESS) {
-	    if (ev.u.key == NEWT_KEY_TAB) {
-		er.result = ER_SWALLOWED;
-		dir = 1;
-		wrap = 1;
-	    } else if (ev.u.key == NEWT_KEY_UNTAB) {
-		er.result = ER_SWALLOWED;
-		dir = -1;
-		wrap = 1;
-	    }
-	}
-
-	if (form->numComps) {
-	    i = form->currComp;
-	    num = 0;
-	    while (er.result == ER_IGNORED && num != form->numComps ) {
-		er = form->elements[i].co->ops->event(form->elements[i].co, ev);
-
-		num++;
-		i++;
-		if (i == form->numComps) i = 0;
-	    }
-	}
-
-	break;
-
-      case EV_NORMAL:
-	  if (ev.event == EV_MOUSE) {
-	      found = 0;
-	      for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
-		  if ((el->co->top <= ev.u.mouse.y) &&
-		      (el->co->top + el->co->height > ev.u.mouse.y) &&
-		      (el->co->left <= ev.u.mouse.x) &&
-		      (el->co->left + el->co->width > ev.u.mouse.x)) {
-		      found = 1;
-		      if (el->co->takesFocus) {
-			  gotoComponent(form, i);
-			  subco = form->elements[form->currComp].co;
-		      }
-		  }
-		  /* If we did not find a co to send this event to, we
-		     should just swallow the event here. */
-	      }
-	      if (!found) {
-		  er.result = ER_SWALLOWED;
-
-		  return er;
-	      }
-	  }
-	er = subco->ops->event(subco, ev);
-	switch (er.result) {
-	  case ER_NEXTCOMP:
-	    er.result = ER_SWALLOWED;
-	    dir = 1;
-	    break;
-
-	  case ER_EXITFORM:
-	    form->exitComp = subco;
-	    break;
-
-	  default:
-	    break;
-	}
-	break;
-
-      case EV_LATE:
-	er = subco->ops->event(subco, ev);
-
-	if (er.result == ER_IGNORED) {
-	    switch (ev.u.key) {
-	      case NEWT_KEY_UP:
-	      case NEWT_KEY_LEFT:
-	      case NEWT_KEY_BKSPC:
-		er.result = ER_SWALLOWED;
-		dir = -1;
-		break;
-
-	      case NEWT_KEY_DOWN:
-	      case NEWT_KEY_RIGHT:
-		er.result = ER_SWALLOWED;
-		dir = 1;
-		break;
-
-	     case NEWT_KEY_PGUP:
-		er.result = ER_SWALLOWED;
-		dir = -1;
-		page = 1;
-		break;
-
-	     case NEWT_KEY_PGDN:
-		er.result = ER_SWALLOWED;
-		dir = 1;
-		page = 1;
-		break;
-	    }
-	}
-    }
-
-    if (dir) {
-	new = form->currComp;
-
-	if (page) {
-	    new += dir * co->height;
-	    if (new < 0)
-		new = 0;
-	    else if (new >= form->numComps)
-		new = (form->numComps - 1);
-
-	    while (!form->elements[new].co->takesFocus)
-		new = new - dir;
-	} else {
-	    do {
-		new += dir;
-
-		if (wrap) {
-		    if (new < 0)
-			new = form->numComps - 1;
-		    else if (new >= form->numComps)
-			new = 0;
-		} else if (new < 0 || new >= form->numComps)
-		    return er;
-	    } while (!form->elements[new].co->takesFocus);
-	}
-
-	/* make sure this component is visible */
-	if (!componentFits(co, new)) {
-	    gotoComponent(form, -1);
-
-	    if (dir < 0) {
-		/* make the new component the first one */
-		form->vertOffset = form->elements[new].top - co->top;
-	    } else {
-		/* make the new component the last one */
-		form->vertOffset = (form->elements[new].top +
-					form->elements[new].co->height) -
-				    (co->top + co->height);
-	    }
-
-	    if (form->vertOffset < 0) form->vertOffset = 0;
-	    if (form->vertOffset > (form->numRows - co->height))
-		form->vertOffset = form->numRows - co->height;
-
-	    newtDrawForm(co);
-	}
-
-	gotoComponent(form, new);
-	er.result = ER_SWALLOWED;
-    }
-
-    return er;
-}
-
-/* this also destroys all of the components on the form */
-void newtFormDestroy(newtComponent co) {
-    newtComponent subco;
-    struct form * form = co->data;
-    int i;
-
-    /* first, destroy all of the components */
-    for (i = 0; i < form->numComps; i++) {
-	subco = form->elements[i].co;
-	if (subco->ops->destroy) {
-	    subco->ops->destroy(subco);
-	} else {
-	    if (subco->data) free(subco->data);
-	    free(subco);
-	}
-    }
-
-    if (form->hotKeys) free(form->hotKeys);
-
-    free(form->elements);
-    free(form);
-    free(co);
-}
-
-newtComponent newtRunForm(newtComponent co) {
-    struct newtExitStruct es;
-
-    newtFormRun(co, &es);
-    if (es.reason == NEWT_EXIT_HOTKEY) {
-	if (es.u.key == NEWT_KEY_F12) {
-	    es.reason = NEWT_EXIT_COMPONENT;
-	    es.u.co = co;
-	} else {
-	    return NULL;
-	}
-    }
-
-    return es.u.co;
-}
-
-void newtFormAddHotKey(newtComponent co, int key) {
-    struct form * form = co->data;
-
-    form->numHotKeys++;
-    form->hotKeys = realloc(form->hotKeys, sizeof(int) * form->numHotKeys);
-    form->hotKeys[form->numHotKeys - 1] = key;
-}
-
-void newtFormSetSize(newtComponent co) {
-    struct form * form = co->data;
-    int delta, i;
-    struct element * el;
-
-    if (form->beenSet) return;
-
-    form->beenSet = 1;
-
-    if (!form->numComps) return;
-
-    co->width = 0;
-    if (!form->fixedHeight) co->height = 0;
-
-    co->top = form->elements[0].co->top;
-    co->left = form->elements[0].co->left;
-    for (i = 0, el = form->elements; i < form->numComps; i++, el++) {
-	if (el->co->ops == &formOps)
-	    newtFormSetSize(el->co);
-
- 	el->left = el->co->left;
- 	el->top = el->co->top;
-
-	if (co->left > el->co->left) {
-	    delta = co->left - el->co->left;
-	    co->left -= delta;
-	    co->width += delta;
-	}
-
-	if (co->top > el->co->top) {
-	    delta = co->top - el->co->top;
-	    co->top -= delta;
-	    if (!form->fixedHeight)
-		co->height += delta;
-	}
-
-	if ((co->left + co->width) < (el->co->left + el->co->width))
-	    co->width = (el->co->left + el->co->width) - co->left;
-
-	if (!form->fixedHeight) {
-	    if ((co->top + co->height) < (el->co->top + el->co->height))
-		co->height = (el->co->top + el->co->height) - co->top;
-	}
-
-	if ((el->co->top + el->co->height - co->top) > form->numRows) {
-	    form->numRows = el->co->top + el->co->height - co->top;
-	}
-    }
-}
-
-void newtFormRun(newtComponent co, struct newtExitStruct * es) {
-    struct form * form = co->data;
-    struct event ev;
-    struct eventResult er;
-    int key, i, max;
-    int done = 0;
-    fd_set readSet, writeSet;
-    struct timeval nextTimeout, now, timeout;
-
-    newtFormSetSize(co);
-    /* draw all of the components */
-    newtDrawForm(co);
-
-    if (form->currComp == -1) {
-	gotoComponent(form, 0);
-    } else
-	gotoComponent(form, form->currComp);
-
-    while (!done) {
-	newtRefresh();
-
-	FD_ZERO(&readSet);
-	FD_ZERO(&writeSet);
-	FD_SET(0, &readSet);
-	max = form->maxFd;
-
-	for (i = 0; i < form->numFds; i++) {
-	    if (form->fds[i].flags & NEWT_FD_READ)
-		FD_SET(form->fds[i].fd, &readSet);
-	    if (form->fds[i].flags & NEWT_FD_WRITE)
-		FD_SET(form->fds[i].fd, &writeSet);
-	}
-
-	if (form->timer) {
-	    /* Calculate when we next need to return with a timeout. Do
-	       this inside the loop in case a callback resets the timer. */
-	    if (!form->lastTimeout.tv_sec && !form->lastTimeout.tv_usec)
-		gettimeofday(&form->lastTimeout, NULL);
-
-	    nextTimeout.tv_sec = form->lastTimeout.tv_sec + 
-		    (form->timer / 1000);
-	    nextTimeout.tv_usec = form->lastTimeout.tv_usec + 
-				    (form->timer % 1000) * 1000;
-
-	    gettimeofday(&now, 0);
-
-	    if (now.tv_sec > nextTimeout.tv_sec) {
-		timeout.tv_sec = timeout.tv_usec = 0;
-	    } else if (now.tv_sec == nextTimeout.tv_sec) {
-		timeout.tv_sec = 0;
-		if (now.tv_usec > nextTimeout.tv_usec)
-		    timeout.tv_usec = 0;
-		else
-		    timeout.tv_usec = nextTimeout.tv_usec - now.tv_usec;
-	    } else if (now.tv_sec < nextTimeout.tv_sec) {
-		timeout.tv_sec = nextTimeout.tv_sec - now.tv_sec;
-		if (now.tv_usec > nextTimeout.tv_usec)
-		    timeout.tv_sec--,
-		    timeout.tv_usec = nextTimeout.tv_usec + 1000000 -
-					now.tv_usec;
-		else 
-		    timeout.tv_usec = nextTimeout.tv_usec - now.tv_usec;
-	    }
-	} else {
-	    timeout.tv_sec = timeout.tv_usec = 0;
-	}
-
-	i = select(max + 1, &readSet, &writeSet, NULL, 
-			form->timer ? &timeout : NULL);
-	if (i < 0) continue;	/* ?? What should we do here? */
-
-	if (i == 0) {
-	    done = 1;
-	    es->reason = NEWT_EXIT_TIMER;
-	    gettimeofday(&form->lastTimeout, NULL);
-	} else
-	{
-	    if (FD_ISSET(0, &readSet)) {
-
-		key = newtGetKey();
-
-		if (key == NEWT_KEY_RESIZE) {
-		    /* newtResizeScreen(1); */
-		    continue;
-		}
-
-		for (i = 0; i < form->numHotKeys; i++) {
-		    if (form->hotKeys[i] == key) {
-			es->reason = NEWT_EXIT_HOTKEY;
-			es->u.key = key;
-			done = 1;
-			break;
-		    }
-		}
-
-		if (key == NEWT_KEY_F1 && form->helpTag && form->helpCb)
-		    form->helpCb(co, form->helpTag);
-
-		if (!done) {
-		    ev.event = EV_KEYPRESS;
-		    ev.u.key = key;
-
-		    er = sendEvent(co, ev);
-
-		    if (er.result == ER_EXITFORM) {
-			done = 1;
-			es->reason = NEWT_EXIT_COMPONENT;
-			es->u.co = form->exitComp;
-		    }
-		}
-	    } else {
-		es->reason = NEWT_EXIT_FDREADY;
-		done = 1;
-	    }
-	}
-    }
-    newtRefresh();
-}
-
-static struct eventResult sendEvent(newtComponent co, struct event ev) {
-    struct eventResult er;
-
-    ev.when = EV_EARLY;
-    er = co->ops->event(co, ev);
-
-    if (er.result == ER_IGNORED) {
-	ev.when = EV_NORMAL;
-	er = co->ops->event(co, ev);
-    }
-
-    if (er.result == ER_IGNORED) {
-	ev.when = EV_LATE;
-	er = co->ops->event(co, ev);
-    }
-
-    return er;
-}
-
-static void gotoComponent(struct form * form, int newComp) {
-    struct event ev;
-
-    if (form->currComp != -1) {
-	ev.event = EV_UNFOCUS;
-	sendEvent(form->elements[form->currComp].co, ev);
-    }
-
-    form->currComp = newComp;
-
-    if (form->currComp != -1) {
-	ev.event = EV_FOCUS;
-	ev.when = EV_NORMAL;
-	sendEvent(form->elements[form->currComp].co, ev);
-    }
-}
-
-void newtComponentAddCallback(newtComponent co, newtCallback f, void * data) {
-    co->callback = f;
-    co->callbackData = data;
-}
-
-void newtComponentTakesFocus(newtComponent co, int val) {
-    co->takesFocus = val;
-}
-
-void newtFormSetBackground(newtComponent co, int color) {
-    struct form * form = co->data;
-
-    form->background = color;
-}
-
-void newtFormWatchFd(newtComponent co, int fd, int fdFlags) {
-    struct form * form = co->data;
-
-    form->fds = realloc(form->fds, (form->numFds + 1) * sizeof(*form->fds));
-    form->fds[form->numFds].fd = fd;
-    form->fds[form->numFds++].flags = fdFlags;
-    if (form->maxFd < fd) form->maxFd = fd;
-}
-
-void newtSetHelpCallback(newtCallback cb) {
-    helpCallback = cb;
-}
diff --git a/mdk-stage1/newt/grid.c b/mdk-stage1/newt/grid.c
deleted file mode 100644
index 37d2b2e74..000000000
--- a/mdk-stage1/newt/grid.c
+++ /dev/null
@@ -1,389 +0,0 @@
-#include <alloca.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct gridField {
-    enum newtGridElement type;
-    union {
-	newtGrid grid;
-	newtComponent co;
-    } u;
-    int padLeft, padTop, padRight, padBottom;
-    int anchor;
-    int flags;
-}; 
-
-struct grid_s {
-    int rows, cols;
-    int width, height;		/* totals, -1 means unknown */
-    struct gridField ** fields;
-};
-
-/* this is a bit of a hack */
-extern struct componentOps formOps[];
-
-newtGrid newtCreateGrid(int cols, int rows) {
-    newtGrid grid;
-
-    grid = malloc(sizeof(*grid));
-    grid->rows = rows;
-    grid->cols = cols;
-
-    grid->fields = malloc(sizeof(*grid->fields) * cols);
-    while (cols--) {
-	grid->fields[cols] = malloc(sizeof(**(grid->fields)) * rows);
-	memset(grid->fields[cols], 0, sizeof(**(grid->fields)) * rows);
-    }
-
-    grid->width = grid->height = -1;
-
-    return grid;
-}
-
-void newtGridSetField(newtGrid grid, int col, int row, 
-		      enum newtGridElement type, void * val, int padLeft,
-		      int padTop, int padRight, int padBottom, int anchor,
-		      int flags) {
-    struct gridField * field = &grid->fields[col][row];
-
-    if (field->type == NEWT_GRID_SUBGRID) 
-	newtGridFree(field->u.grid, 1);
-
-    field->type = type;
-    field->u.co = (void *) val;
-
-    field->padLeft = padLeft;
-    field->padRight = padRight;
-    field->padTop = padTop;
-    field->padBottom = padBottom;
-    field->anchor = anchor;
-    field->flags = flags;
-
-    grid->width = grid->height = -1;
-}
-
-static void distSpace(int extra, int items, int * list) {
-    int all, some, i;
-
-    all = extra / items;
-    some = extra % items;
-    for (i = 0; i < items; i++) {
-	list[i] += all;
-	if (some) {
-	    list[i]++;
-	    some--;
-	}
-    }
-}
-
-static void shuffleGrid(newtGrid grid, int left, int top, int set) {
-    struct gridField * field;
-    int row, col;
-    int i, j;
-    int minWidth, minHeight;
-    int * widths, * heights;
-    int thisLeft, thisTop;
-    int x, y, remx, remy;
-
-    widths = alloca(sizeof(*widths) * grid->cols);
-    memset(widths, 0, sizeof(*widths) * grid->cols);
-    heights = alloca(sizeof(*heights) * grid->rows);
-    memset(heights, 0, sizeof(*heights) * grid->rows);
-
-    minWidth = 0;
-    for (row = 0; row < grid->rows; row++) {
-	i = 0;
-	for (col = 0; col < grid->cols; col++) {
-	    field = &grid->fields[col][row];
-	    if (field->type == NEWT_GRID_SUBGRID) {
-		/* we'll have to redo this later */
-		if (field->u.grid->width == -1) 
-		    shuffleGrid(field->u.grid, left, top, 0);
-		j = field->u.grid->width;
-	    } else if (field->type == NEWT_GRID_COMPONENT) {
-		if (field->u.co->ops == formOps)
-		    newtFormSetSize(field->u.co);
-		j = field->u.co->width;
-	    } else 
-		j = 0;
-
-	    j += field->padLeft + field->padRight;
-
-	    if (j > widths[col]) widths[col] = j;
-	    i += widths[col];
-	}
-
-	if (i > minWidth) minWidth = i;
-    }
-
-    minHeight = 0;
-    for (col = 0; col < grid->cols; col++) {
-	i = 0;
-	for (row = 0; row < grid->rows; row++) {
-	    field = &grid->fields[col][row];
-	    if (field->type == NEWT_GRID_SUBGRID) {
-		/* we'll have to redo this later */
-		if (field->u.grid->height == -1) 
-		    shuffleGrid(field->u.grid, 0, 0, 0);
-		j = field->u.grid->height;
-	    } else if (field->type == NEWT_GRID_COMPONENT){
-		j = field->u.co->height;
-	    } else 
-		j = 0;
-
-	    j += field->padTop + field->padBottom;
-
-	    if (j > heights[row]) heights[row] = j;
-	    i += heights[row];
-	}
-
-	if (i > minHeight) minHeight = i;
-    }
-
-    /* this catches the -1 case */
-    if (grid->width < minWidth) grid->width = minWidth;		/* ack! */
-    if (grid->height < minHeight) grid->height = minHeight;	/* ditto! */
-
-    if (!set) return;
-
-    distSpace(grid->width - minWidth, grid->cols, widths);
-    distSpace(grid->height - minHeight, grid->rows, heights);
-
-    thisTop = top;
-    for (row = 0; row < grid->rows; row++) {
-	i = 0;
-	thisLeft = left;
-	for (col = 0; col < grid->cols; col++) {
-	    field = &grid->fields[col][row];
-
-	    if (field->type == NEWT_GRID_EMPTY) continue;
-
-	    x = thisLeft + field->padLeft;
-	    remx = widths[col] - field->padLeft - field->padRight;
-	    y = thisTop + field->padTop;
-	    remy = heights[row] - field->padTop - field->padBottom;
-
-	    if (field->type == NEWT_GRID_SUBGRID) {
-		remx -= field->u.grid->width;
-		remy -= field->u.grid->height;
-	    } else if (field->type == NEWT_GRID_COMPONENT) {
-		remx -= field->u.co->width;
-		remy -= field->u.co->height;
-	    }
-
-	    if (!(field->flags & NEWT_GRID_FLAG_GROWX)) {
-		if (field->anchor & NEWT_ANCHOR_RIGHT)
-		    x += remx;
-		else if (!(field->anchor & NEWT_ANCHOR_LEFT))
-		    x += (remx / 2);
-	    }
-	 
-	    if (!(field->flags & NEWT_GRID_FLAG_GROWY)) {
-		if (field->anchor & NEWT_ANCHOR_BOTTOM)
-		    y += remx;
-		else if (!(field->anchor & NEWT_ANCHOR_TOP))
-		    y += (remy / 2);
-	    }
-
-	    if (field->type == NEWT_GRID_SUBGRID) {
-		if (field->flags & NEWT_GRID_FLAG_GROWX)
-		    field->u.grid->width = widths[col] - field->padLeft 
-						- field->padRight;
-		if (field->flags & NEWT_GRID_FLAG_GROWY)
-		    field->u.grid->height = heights[col] - field->padTop
-						- field->padBottom;
-
-		shuffleGrid(field->u.grid, x, y, 1);
-	    } else if (field->type == NEWT_GRID_COMPONENT) {
-		field->u.co->ops->place(field->u.co, x, y);
-	    }
-
-	    thisLeft += widths[col];
-	}
-
-	thisTop += heights[row];
-    }
-}
-
-void newtGridPlace(newtGrid grid, int left, int top) {
-    shuffleGrid(grid, left, top, 1);
-}
-
-void newtGridFree(newtGrid grid, int recurse) {
-    int row, col;
-
-    for (col = 0; col < grid->cols; col++) {
-	if (recurse) {
-	    for (row = 0; row < grid->rows; row++) {
-		if (grid->fields[col][row].type == NEWT_GRID_SUBGRID)
-		    newtGridFree(grid->fields[col][row].u.grid, 1);
-	    }
-	}
-
-	free(grid->fields[col]);
-    }
-
-    free(grid->fields);
-    free(grid);
-}
-
-void newtGridGetSize(newtGrid grid, int * width, int * height) {
-    if (grid->width == -1 || grid->height == -1) {
-	grid->width = grid->height = -1;
-	shuffleGrid(grid, 0, 0, 1);
-    }
-
-    *width = grid->width;
-    *height = grid->height;
-}
-
-void newtGridWrappedWindow(newtGrid grid, char * title) {
-    int width, height, offset = 0;
-
-    newtGridGetSize(grid, &width, &height);
-    if ((size_t)width < strlen(title) + 2) {
-	offset = ((strlen(title) + 2) - width) / 2; 
-	width = strlen(title) + 2;
-    }
-    newtCenteredWindow(width + 2, height + 2, title);
-    newtGridPlace(grid, 1 + offset, 1);
-}
-
-void newtGridWrappedWindowAt(newtGrid grid, char * title, int left, int top) {
-    int width, height;
-
-    newtGridGetSize(grid, &width, &height);
-    newtOpenWindow(left, top, width + 2, height + 2, title);
-    newtGridPlace(grid, 1, 1);
-}
-
-void newtGridAddComponentsToForm(newtGrid grid, newtComponent form, 
-				 int recurse) {
-    int row, col;
-
-    for (col = 0; col < grid->cols; col++) {
-	for (row = 0; row < grid->rows; row++) {
-	    if (grid->fields[col][row].type == NEWT_GRID_SUBGRID && recurse)
-		newtGridAddComponentsToForm(grid->fields[col][row].u.grid,
-					    form, 1);
-	    else if (grid->fields[col][row].type == NEWT_GRID_COMPONENT)
-		newtFormAddComponent(form, grid->fields[col][row].u.co);
-	}
-    }
-}
-
-/* this handles up to 50 items */
-static newtGrid stackem(int isVert, enum newtGridElement type1, void * what1,
-			va_list args, int close) {
-    struct item {
-	enum newtGridElement type;
-	void * what;
-    } items[50];
-    int i, num;
-    newtGrid grid;
-    
-    items[0].type = type1, items[0].what = what1, num = 1;
-    while (1) {
-	items[num].type = va_arg(args, enum newtGridElement);
-	if (items[num].type == NEWT_GRID_EMPTY) break;
-
-	items[num].what = va_arg(args, void *);
-	num++;
-    }
-
-    grid = newtCreateGrid(isVert ? 1 : num, isVert ? num : 1);
-
-    for (i = 0; i < num; i++) {
-	newtGridSetField(grid, isVert ? 0 : i, isVert ? i : 0, 
-			 items[i].type, items[i].what,
-			 close ? 0 : (i ? (isVert ? 0 : 1) : 0),
-			 close ? 0 : (i ? (isVert ? 1 : 0) : 0), 0, 0, 0, 0);
-    }
-
-    return grid;
-}
-
-newtGrid newtGridHCloseStacked(enum newtGridElement type1, void * what1, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, what1);
-
-    grid = stackem(0, type1, what1, args, 1);
-
-    va_start(args, what1);
-
-    return grid;
-}
-
-newtGrid newtGridVCloseStacked(enum newtGridElement type1, void * what1, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, what1);
-
-    grid = stackem(1, type1, what1, args, 1);
-
-    va_start(args, what1);
-
-    return grid;
-}
-
-newtGrid newtGridVStacked(enum newtGridElement type1, void * what1, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, what1);
-
-    grid = stackem(1, type1, what1, args, 0);
-
-    va_start(args, what1);
-
-    return grid;
-}
-
-newtGrid newtGridHStacked(enum newtGridElement type1, void * what1, ...) {
-    va_list args;
-    newtGrid grid;
-
-    va_start(args, what1);
-
-    grid = stackem(0, type1, what1, args, 0);
-
-    va_start(args, what1);
-
-    return grid;
-}
-
-newtGrid newtGridBasicWindow(newtComponent text, newtGrid middle,
-			     newtGrid buttons) {
-    newtGrid grid;
-
-    grid = newtCreateGrid(1, 3);
-    newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, text,
-		     0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-    newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, middle,
-		     0, 1, 0, 0, 0, 0);
-    newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttons,
-		     0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-
-    return grid;
-}
-
-newtGrid newtGridSimpleWindow(newtComponent text, newtComponent middle,
-			     newtGrid buttons) {
-    newtGrid grid;
-
-    grid = newtCreateGrid(1, 3);
-    newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, text,
-		     0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-    newtGridSetField(grid, 0, 1, NEWT_GRID_COMPONENT, middle,
-		     0, 1, 0, 0, 0, 0);
-    newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttons,
-		     0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-
-    return grid;
-}
diff --git a/mdk-stage1/newt/label.c b/mdk-stage1/newt/label.c
deleted file mode 100644
index f1a9cebbf..000000000
--- a/mdk-stage1/newt/label.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct label {
-    char * text;
-    int length;
-};
-
-static void labelDraw(newtComponent co);
-static void labelDestroy(newtComponent co);
-
-static struct componentOps labelOps = {
-    labelDraw,
-    newtDefaultEventHandler,
-    labelDestroy,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-newtComponent newtLabel(int left, int top, const char * text) {
-    newtComponent co;
-    struct label * la;
-
-    co = malloc(sizeof(*co));
-    la = malloc(sizeof(struct label));
-    co->data = la;
-
-    co->ops = &labelOps;
-
-    co->height = 1;
-    co->width = strlen(text);
-    co->top = top;
-    co->left = left;
-    co->takesFocus = 0;
-
-    la->length = strlen(text);
-    la->text = strdup(text);
-
-    return co;
-}
-
-void newtLabelSetText(newtComponent co, const char * text) {
-    int newLength;
-    struct label * la = co->data;
-
-    newLength = strlen(text);
-    if (newLength <= la->length) {
-	memset(la->text, ' ', la->length);
-	memcpy(la->text, text, newLength);
-    } else {
-	free(la->text);
-	la->text = strdup(text);
-	la->length = newLength;
-	co->width = newLength;
-    }
-
-    labelDraw(co);
-}
-
-static void labelDraw(newtComponent co) {
-    struct label * la = co->data;
-
-    if (co->isMapped == -1) return;
-
-    SLsmg_set_color(COLORSET_LABEL);
-
-    newtGotorc(co->top, co->left);
-    SLsmg_write_string(la->text);
-}
-
-static void labelDestroy(newtComponent co) {
-    struct label * la = co->data;
-
-    free(la->text);
-    free(la);
-    free(co);
-}
diff --git a/mdk-stage1/newt/listbox.c b/mdk-stage1/newt/listbox.c
deleted file mode 100644
index cdbf792ca..000000000
--- a/mdk-stage1/newt/listbox.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/* This goofed-up box whacked into shape by Elliot Lee <sopwith@cuc.edu>
-   (from the original listbox by Erik Troan <ewt@redhat.com>)
-   and contributed to newt for use under the LGPL license.
-   Copyright (C) 1996, 1997 Elliot Lee */
-
-#include <slang.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-
-/* Linked list of items in the listbox */
-struct items {
-    char * text;
-    const void *data;
-    unsigned char isSelected;
-    struct items *next;
-};
-
-/* Holds all the relevant information for this listbox */
-struct listbox {
-    newtComponent sb;   /* Scrollbar on right side of listbox */
-    int curWidth;	/* size of text w/o scrollbar or border*/
-    int curHeight;	/* size of text w/o border */
-    int sbAdjust;
-    int bdxAdjust, bdyAdjust;
-    int numItems, numSelected;
-    int userHasSetWidth;
-    int currItem, startShowItem; /* startShowItem is the first item displayed
-				   on the screen */
-    int isActive; /* If we handle key events all the time, it seems
-		     to do things even when they are supposed to be for
-		     another button/whatever */
-    struct items *boxItems;
-    int grow;
-    int flags; /* flags for this listbox, right now just
-		  NEWT_FLAG_RETURNEXIT */
-};
-
-static void listboxDraw(newtComponent co);
-static void listboxDestroy(newtComponent co);
-static struct eventResult listboxEvent(newtComponent co, struct event ev);
-static void newtListboxRealSetCurrent(newtComponent co);
-static void listboxPlace(newtComponent co, int newLeft, int newTop);
-static inline void updateWidth(newtComponent co, struct listbox * li,
-				int maxField);
-static void listboxMapped(newtComponent co, int isMapped);
-
-static struct componentOps listboxOps = {
-    listboxDraw,
-    listboxEvent,
-    listboxDestroy,
-    listboxPlace,
-    listboxMapped,
-};
-
-static void listboxMapped(newtComponent co, int isMapped) {
-    struct listbox * li = co->data;
-
-    co->isMapped = isMapped;
-    if (li->sb)
-	li->sb->ops->mapped(li->sb, isMapped);
-}
-
-static void listboxPlace(newtComponent co, int newLeft, int newTop) {
-    struct listbox * li = co->data;
-
-    co->top = newTop;
-    co->left = newLeft;
-
-    if (li->sb)
-	li->sb->ops->place(li->sb, co->left + co->width - li->bdxAdjust - 1,
-			   co->top);
-}
-
-newtComponent newtListbox(int left, int top, int height, int flags) {
-    newtComponent co, sb;
-    struct listbox * li;
-
-    if (!(co = malloc(sizeof(*co))))
-	return NULL;
-
-    if (!(li = malloc(sizeof(struct listbox)))) {
-	free(co);
-	return NULL;
-    }
-
-    li->boxItems = NULL;
-    li->numItems = 0;
-    li->currItem = 0;
-    li->numSelected = 0;
-    li->isActive = 0;
-    li->userHasSetWidth = 0;
-    li->startShowItem = 0;
-    li->sbAdjust = 0;
-    li->bdxAdjust = 0;
-    li->bdyAdjust = 0;
-    li->flags = flags & (NEWT_FLAG_RETURNEXIT | NEWT_FLAG_BORDER |
-			 NEWT_FLAG_MULTIPLE);
-
-    if (li->flags & NEWT_FLAG_BORDER) {
-	li->bdxAdjust = 2;
-	li->bdyAdjust = 1;
-    }
-
-    co->height = height;
-    li->curHeight = co->height - (2 * li->bdyAdjust);
-
-    if (height) {
-	li->grow = 0;
-	if (flags & NEWT_FLAG_SCROLL) {
-	    sb = newtVerticalScrollbar(left, top + li->bdyAdjust,
-					li->curHeight,
-					COLORSET_LISTBOX, COLORSET_ACTLISTBOX);
-	    li->sbAdjust = 3;
-	} else {
-	    sb = NULL;
-	}
-    } else {
-	li->grow = 1;
-	sb = NULL;
-    }
-
-    li->sb = sb;
-    co->data = li;
-    co->isMapped = 0;
-    co->left = left;
-    co->top = top;
-    co->ops = &listboxOps;
-    co->takesFocus = 1;
-    co->callback = NULL;
-
-    updateWidth(co, li, 5);
-
-    return co;
-}
-
-static inline void updateWidth(newtComponent co, struct listbox * li,
-				int maxField) {
-    li->curWidth = maxField;
-    co->width = li->curWidth + li->sbAdjust + 2 * li->bdxAdjust;
-
-    if (li->sb)
-	li->sb->left = co->left + co->width - li->bdxAdjust - 1;
-}
-
-void newtListboxSetCurrentByKey(newtComponent co, void * key) {
-    struct listbox * li = co->data;
-    struct items * item;
-    int i;
-
-    item = li->boxItems, i = 0;
-    while (item && item->data != key)
-	item = item->next, i++;
-
-    if (item)
-	newtListboxSetCurrent(co, i);
-}
-
-void newtListboxSetCurrent(newtComponent co, int num)
-{
-    struct listbox * li = co->data;
-
-    if (num >= li->numItems)
-	li->currItem = li->numItems - 1;
-    else if (num < 0)
-	li->currItem = 0;
-    else
-	li->currItem = num;
-
-    if (li->currItem < li->startShowItem)
-	li->startShowItem = li->currItem;
-    else if (li->currItem - li->startShowItem > li->curHeight - 1)
-	li->startShowItem = li->currItem - li->curHeight + 1;
-    if (li->startShowItem + li->curHeight > li->numItems)
-	li->startShowItem = li->numItems - li->curHeight;
-    if(li->startShowItem < 0)
-	li->startShowItem = 0;
-
-    newtListboxRealSetCurrent(co);
-}
-
-static void newtListboxRealSetCurrent(newtComponent co)
-{
-    struct listbox * li = co->data;
-
-    if(li->sb)
-	newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-    listboxDraw(co);
-    if(co->callback) co->callback(co, co->callbackData);
-}
-
-void newtListboxSetWidth(newtComponent co, int width) {
-    struct listbox * li = co->data;
-
-    co->width = width;
-    li->curWidth = co->width - li->sbAdjust - 2 * li->bdxAdjust;
-    li->userHasSetWidth = 1;
-    if (li->sb) li->sb->left = co->width + co->left - 1;
-    listboxDraw(co);
-}
-
-void * newtListboxGetCurrent(newtComponent co) {
-    struct listbox * li = co->data;
-    int i;
-    struct items *item;
-
-    for(i = 0, item = li->boxItems; item != NULL && i < li->currItem;
-	i++, item = item->next);
-
-    if (item)
-	return (void *)item->data;
-    else
-	return NULL;
-}
-
-void newtListboxSelectItem(newtComponent co, const void * key,
-	enum newtFlagsSense sense)
-{
-    struct listbox * li = co->data;
-    int i;
-    struct items * item;
-
-    item = li->boxItems, i = 0;
-    while (item && item->data != key)
-	item = item->next, i++;
-
-    if (!item) return;
-
-    if (item->isSelected)
-	li->numSelected--;
-
-    switch(sense) {
-	case NEWT_FLAGS_RESET:
-		item->isSelected = 0; break;
-	case NEWT_FLAGS_SET:
-		item->isSelected = 1; break;
-	case NEWT_FLAGS_TOGGLE:
-		item->isSelected = !item->isSelected;
-    }
-
-    if (item->isSelected)
-	li->numSelected++;
-
-    listboxDraw(co);
-}
-
-void newtListboxClearSelection(newtComponent co)
-{
-    struct items *item;
-    struct listbox * li = co->data;
-
-    for(item = li->boxItems; item != NULL;
-	item = item->next)
-	item->isSelected = 0;
-    li->numSelected = 0;
-    listboxDraw(co);
-}
-
-/* Free the returned array after use, but NOT the values in the array */
-void ** newtListboxGetSelection(newtComponent co, int *numitems)
-{
-    struct listbox * li;
-    int i;
-    void **retval;
-    struct items *item;
-
-    if(!co || !numitems) return NULL;
-
-    li = co->data;
-    if(!li || !li->numSelected) return NULL;
-
-    retval = malloc(li->numSelected * sizeof(void *));
-    for(i = 0, item = li->boxItems; item != NULL;
-	item = item->next)
-	if(item->isSelected)
-	    retval[i++] = (void *)item->data;
-    *numitems = li->numSelected;
-    return retval;
-}
-
-void newtListboxSetEntry(newtComponent co, int num, const char * text) {
-    struct listbox * li = co->data;
-    int i;
-    struct items *item;
-
-    for(i = 0, item = li->boxItems; item != NULL && i < num;
-	i++, item = item->next);
-
-    if(!item)
-	return;
-    else {
-	free(item->text);
-	item->text = strdup(text);
-    }
-    if (li->userHasSetWidth == 0 && strlen(text) > (size_t)li->curWidth) {
-	updateWidth(co, li, strlen(text));
-    }
-
-    if (num >= li->startShowItem && num <= li->startShowItem + co->height)
-	listboxDraw(co);
-}
-
-void newtListboxSetData(newtComponent co, int num, void * data) {
-    struct listbox * li = co->data;
-    int i;
-    struct items *item;
-
-    for(i = 0, item = li->boxItems; item != NULL && i < num;
-	i++, item = item->next);
-
-    item->data = data;
-}
-
-int newtListboxAppendEntry(newtComponent co, const char * text,
-	                const void * data) {
-    struct listbox * li = co->data;
-    struct items *item;
-
-    if(li->boxItems) {
-	for (item = li->boxItems; item->next != NULL; item = item->next);
-
-	item = item->next = malloc(sizeof(struct items));
-    } else {
-	item = li->boxItems = malloc(sizeof(struct items));
-    }
-
-    if (!li->userHasSetWidth && text && (strlen(text) > (size_t)li->curWidth))
-	updateWidth(co, li, strlen(text));
-
-    item->text = strdup(text); item->data = data; item->next = NULL;
-    item->isSelected = 0;
-
-    if (li->grow)
-	co->height++, li->curHeight++;
-    li->numItems++;
-
-    return 0;
-}
-
-int newtListboxInsertEntry(newtComponent co, const char * text,
-	                   const void * data, void * key) {
-    struct listbox * li = co->data;
-    struct items *item, *t;
-
-    if (li->boxItems) {
-	if (key) {
-	    item = li->boxItems;
-	    while (item && item->data != key) item = item->next;
-
-	    if (!item) return 1;
-
-	    t = item->next;
-	    item = item->next = malloc(sizeof(struct items));
-	    item->next = t;
-	} else {
-	    t = li->boxItems;
-	    item = li->boxItems = malloc(sizeof(struct items));
-	    item->next = t;
-	}
-    } else if (key) {
-	return 1;
-    } else {
-	item = li->boxItems = malloc(sizeof(struct items));
-	item->next = NULL;
-    }
-
-    if (!li->userHasSetWidth && text && (strlen(text) > (size_t)li->curWidth))
-	updateWidth(co, li, strlen(text));
-
-    item->text = strdup(text?text:"(null)"); item->data = data;
-    item->isSelected = 0;
-
-    if (li->sb)
-	li->sb->left = co->left + co->width - li->bdxAdjust - 1;
-    li->numItems++;
-
-    listboxDraw(co);
-
-    return 0;
-}
-
-int newtListboxDeleteEntry(newtComponent co, void * key) {
-    struct listbox * li = co->data;
-    int widest = 0, t;
-    struct items *item, *item2 = NULL;
-    int num;
-
-    if (li->boxItems == NULL || li->numItems <= 0)
-	return 0;
-
-    num = 0;
-
-    item2 = NULL, item = li->boxItems;
-    while (item && item->data != key) {
-	item2 = item;
-	item = item->next;
-	num++;
-    }
-
-    if (!item)
-	return -1;
-
-    if (item2)
-	item2->next = item->next;
-    else
-	li->boxItems = item->next;
-
-    free(item->text);
-    free(item);
-    li->numItems--;
-
-    if (!li->userHasSetWidth) {
-	widest = 0;
-	for (item = li->boxItems; item != NULL; item = item->next)
-	    if ((t = strlen(item->text)) > widest) widest = t;
-    }
-
-    if (li->currItem >= num)
-	li->currItem--;
-
-    if (!li->userHasSetWidth) {
-	updateWidth(co, li, widest);
-    }
-
-    listboxDraw(co);
-
-    return 0;
-}
-
-void newtListboxClear(newtComponent co)
-{
-    struct listbox * li;
-    struct items *anitem, *nextitem;
-    if(co == NULL || (li = co->data) == NULL)
-	return;
-    for(anitem = li->boxItems; anitem != NULL; anitem = nextitem) {
-	nextitem = anitem->next;
-	free(anitem->text);
-	free(anitem);
-    }
-    li->numItems = li->numSelected = li->currItem = li->startShowItem = 0;
-    li->boxItems = NULL;
-    if (!li->userHasSetWidth)
-	updateWidth(co, li, 5);
-}
-
-/* If you don't want to get back the text, pass in NULL for the ptr-ptr. Same
-   goes for the data. */
-void newtListboxGetEntry(newtComponent co, int num, char **text, void **data) {
-    struct listbox * li = co->data;
-    int i;
-    struct items *item;
-
-    if (!li->boxItems || num >= li->numItems) {
-	if(text)
-	    *text = NULL;
-	if(data)
-	    *data = NULL;
-	return;
-    }
-
-    i = 0;
-    item = li->boxItems;
-    while (item && i < num) {
-	i++, item = item->next;
-    }
-
-    if (item) {
-	if (text)
-	    *text = item->text;
-	if (data)
-	    *data = (void *)item->data;
-    }
-}
-
-static void listboxDraw(newtComponent co)
-{
-    struct listbox * li = co->data;
-    struct items *item;
-    int i, j;
-
-    if (!co->isMapped) return ;
-
-    if(li->flags & NEWT_FLAG_BORDER) {
-      if(li->isActive)
-	  SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
-      else
-          SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
-      newtDrawBox(co->left, co->top, co->width, co->height, 0);
-    }
-
-    if(li->sb)
-	li->sb->ops->draw(li->sb);
-
-    SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
-    for(i = 0, item = li->boxItems; item != NULL && i < li->startShowItem;
-	i++, item = item->next);
-
-    j = i;
-
-    for (i = 0; item != NULL && i < li->curHeight; i++, item = item->next) {
-	if (!item->text) continue;
-
-	newtGotorc(co->top + i + li->bdyAdjust, co->left + li->bdxAdjust);
-	if(j + i == li->currItem) {
-	    if(item->isSelected)
-		SLsmg_set_color(NEWT_COLORSET_ACTSELLISTBOX);
-	    else
-		SLsmg_set_color(NEWT_COLORSET_ACTLISTBOX);
-	} else if(item->isSelected)
-	    SLsmg_set_color(NEWT_COLORSET_SELLISTBOX);
-	else
-	    SLsmg_set_color(NEWT_COLORSET_LISTBOX);
-
-	SLsmg_write_nstring(item->text, li->curWidth);
-
-    }
-    newtGotorc(co->top + (li->currItem - li->startShowItem), co->left);
-}
-
-static struct eventResult listboxEvent(newtComponent co, struct event ev) {
-    struct eventResult er;
-    struct listbox * li = co->data;
-    struct items *item;
-    int i;
-    
-    er.result = ER_IGNORED;
-
-    if(ev.when == EV_EARLY || ev.when == EV_LATE) {
-	return er;
-    }
-
-    switch(ev.event) {
-      case EV_KEYPRESS:
-	if (!li->isActive) break;
-
-	switch(ev.u.key) {
-	  case ' ':
-	    if(!(li->flags & NEWT_FLAG_MULTIPLE)) break;
-	    newtListboxSelectItem(co, li->boxItems[li->currItem].data,
-				  NEWT_FLAGS_TOGGLE);
-	    er.result = ER_SWALLOWED;
-	    /* We don't break here, because it is cool to be able to
-	       hold space to select a bunch of items in a list at once */
-
-	  case NEWT_KEY_DOWN:
-	    if(li->numItems <= 0) break;
-	    if(li->currItem < li->numItems - 1) {
-		li->currItem++;
-		if(li->currItem > (li->startShowItem + li->curHeight - 1)) {
-		    li->startShowItem = li->currItem - li->curHeight + 1;
-		    if(li->startShowItem + li->curHeight > li->numItems)
-			li->startShowItem = li->numItems - li->curHeight;
-		}
-		if(li->sb)
-		    newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		listboxDraw(co);
-	    }
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_ENTER:
-	    if(li->numItems <= 0) break;
-	    if(li->flags & NEWT_FLAG_RETURNEXIT)
-		er.result = ER_EXITFORM;
-	    break;
-
-	  case NEWT_KEY_UP:
-	    if(li->numItems <= 0) break;
-	    if(li->currItem > 0) {
-		li->currItem--;
-		if(li->currItem < li->startShowItem)
-		    li->startShowItem = li->currItem;
-		if(li->sb)
-		    newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		listboxDraw(co);
-	    }
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_PGUP:
-	    if(li->numItems <= 0) break;
-	    li->startShowItem -= li->curHeight - 1;
-	    if(li->startShowItem < 0)
-		li->startShowItem = 0;
-	    li->currItem -= li->curHeight - 1;
-	    if(li->currItem < 0)
-		li->currItem = 0;
-	    newtListboxRealSetCurrent(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_PGDN:
-	    if(li->numItems <= 0) break;
-	    li->startShowItem += li->curHeight;
-	    if(li->startShowItem > (li->numItems - li->curHeight)) {
-		li->startShowItem = li->numItems - li->curHeight;
-	    }
-	    li->currItem += li->curHeight;
-	    if(li->currItem >= li->numItems) {
-		li->currItem = li->numItems - 1;
-	    }
-	    newtListboxRealSetCurrent(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_HOME:
-	    if(li->numItems <= 0) break;
-	    newtListboxSetCurrent(co, 0);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_END:
-	    if(li->numItems <= 0) break;
-	    li->startShowItem = li->numItems - li->curHeight;
-	    if(li->startShowItem < 0)
-		li->startShowItem = 0;
-	    li->currItem = li->numItems - 1;
-	    newtListboxRealSetCurrent(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-	  default:
-	      if (li->numItems <= 0) break;
-              if (ev.u.key < NEWT_KEY_EXTRA_BASE && isalpha(ev.u.key)) {
-		  for(i = 0, item = li->boxItems; item != NULL &&
-			  i < li->currItem; i++, item = item->next);
-
-		  if (item && item->text && (toupper(*item->text) == toupper(ev.u.key))) {
-		      item = item->next;
-		      i++;
-		  } else { 
-		      item = li->boxItems;
-		      i = 0;
-		  }
-		  while (item && item->text &&
-			 toupper(*item->text) != toupper(ev.u.key)) {
-		      item = item->next;
-		      i++;
-		  }
-		  if (item) {
-		      li->currItem = i;
-		      if(li->currItem < li->startShowItem ||
-			 li->currItem > li->startShowItem)
-			  li->startShowItem =
-			      li->currItem > li->numItems - li->curHeight ?
-			      li->startShowItem = li->numItems - li->curHeight :
-			      li->currItem;
-		      if(li->sb)
-			  newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		      newtListboxRealSetCurrent(co);
-		      er.result = ER_SWALLOWED;
-		  }
-	      }
-	}
-	break;
-
-      case EV_FOCUS:
-	li->isActive = 1;
-	listboxDraw(co);
-	er.result = ER_SWALLOWED;
-	break;
-
-      case EV_UNFOCUS:
-	li->isActive = 0;
-	listboxDraw(co);
-	er.result = ER_SWALLOWED;
-	break;
-
-      case EV_MOUSE:
-	  /* if this mouse click was within the listbox, make the current
-	     item the item clicked on. */
-	/* Up scroll arrow */
-	if (li->sb &&
-	    ev.u.mouse.x == co->left + co->width - li->bdxAdjust - 1 &&
-	    ev.u.mouse.y == co->top + li->bdyAdjust) {
-	    if(li->numItems <= 0) break;
-	    if(li->currItem > 0) {
-		li->currItem--;
-		if(li->currItem < li->startShowItem)
-		    li->startShowItem = li->currItem;
-		if(li->sb)
-		    newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		listboxDraw(co);
-	    }
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-	/* Down scroll arrow */
-	if (li->sb &&
-	    ev.u.mouse.x == co->left + co->width - li->bdxAdjust - 1 &&
-	    ev.u.mouse.y == co->top + co->height - li->bdyAdjust - 1) {
-	    if(li->numItems <= 0) break;
-	    if(li->currItem < li->numItems - 1) {
-		li->currItem++;
-		if(li->currItem > (li->startShowItem + li->curHeight - 1)) {
-		    li->startShowItem = li->currItem - li->curHeight + 1;
-		    if(li->startShowItem + li->curHeight > li->numItems)
-			li->startShowItem = li->numItems - li->curHeight;
-		}
-		if(li->sb)
-		    newtScrollbarSet(li->sb, li->currItem + 1, li->numItems);
-		listboxDraw(co);
-	    }
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-	if ((ev.u.mouse.y >= co->top + li->bdyAdjust) &&
-	    (ev.u.mouse.y <= co->top + co->height - (li->bdyAdjust * 2)) &&
-	    (ev.u.mouse.x >= co->left + li->bdxAdjust) &&
-	    (ev.u.mouse.x <= co->left + co->width + (li->bdxAdjust * 2))) {
-	    li->currItem = li->startShowItem +
-		(ev.u.mouse.y - li->bdyAdjust - co->top);
-	    newtListboxRealSetCurrent(co);
-	    listboxDraw(co);
-	    if(co->callback) co->callback(co, co->callbackData);
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-    }
-
-    return er;
-}
-
-static void listboxDestroy(newtComponent co) {
-    struct listbox * li = co->data;
-    struct items * item, * nextitem;
-
-    nextitem = item = li->boxItems;
-
-    while (item != NULL) {
-	nextitem = item->next;
-	free(item->text);
-	free(item);
-	item = nextitem;
-    }
-
-    if (li->sb) li->sb->ops->destroy(li->sb);
-
-    free(li);
-    free(co);
-}
diff --git a/mdk-stage1/newt/newt.c b/mdk-stage1/newt/newt.c
deleted file mode 100644
index a41b7900b..000000000
--- a/mdk-stage1/newt/newt.c
+++ /dev/null
@@ -1,672 +0,0 @@
-#include <slang.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/signal.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <termios.h>
-#include <unistd.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct Window {
-    int height, width, top, left;
-    short * buffer;
-    char * title;
-};
-
-struct keymap {
-    char * str;
-    int code;
-    char * tc;
-};
-
-static struct Window windowStack[20];
-static struct Window * currentWindow = NULL;
-
-static char * helplineStack[20];
-static char ** currentHelpline = NULL;
-
-static int cursorRow, cursorCol;
-static int needResize;
-static int cursorOn = 1;
-
-static const char * defaultHelpLine =
-"  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen"
-;
-
-const struct newtColors newtDefaultColorPalette = {
-	  "cyan", "black", 			/* root fg, bg */
-	  "black", "blue",			/* border fg, bg */
-	  "white", "blue",			/* window fg, bg */
-	  "white", "black",			/* shadow fg, bg */
-	  "white", "blue",			/* title fg, bg */
-	  "black", "cyan",			/* button fg, bg */
-	  "yellow", "cyan",			/* active button fg, bg */
-	  "yellow", "blue",			/* checkbox fg, bg */
-	  "blue", "brown",			/* active checkbox fg, bg */
-	  "yellow", "blue",			/* entry box fg, bg */
-	  "white", "blue",			/* label fg, bg */
-	  "black", "cyan",			/* listbox fg, bg */
-	  "yellow", "cyan",			/* active listbox fg, bg */
-	  "white", "blue",			/* textbox fg, bg */
-	  "cyan", "black",			/* active textbox fg, bg */
-	  "white", "blue",			/* help line */
-	  "yellow", "blue",			/* root text */
-	  "blue",					/* scale full */
-	  "red",					/* scale empty */
-	  "blue", "cyan",				/* disabled entry fg, bg */
-	  "white", "blue",			/* compact button fg, bg */
-	  "yellow", "red",			/* active & sel listbox */
-	  "black", "brown"			/* selected listbox */
-};
-
-static const struct keymap keymap[] = {
-	{ "\033OA", 		NEWT_KEY_UP, 		"kh" },
-	{ "\033[A", 		NEWT_KEY_UP, 		"ku" },
-	{ "\033OB", 		NEWT_KEY_DOWN, 		"kd" },
-	{ "\033[B", 		NEWT_KEY_DOWN, 		"kd" },
-	{ "\033[C", 		NEWT_KEY_RIGHT, 	"kr" },
-	{ "\033OC", 		NEWT_KEY_RIGHT, 	"kr" },
-	{ "\033[D", 		NEWT_KEY_LEFT, 		"kl" },
-	{ "\033OD", 		NEWT_KEY_LEFT, 		"kl" },
-	{ "\033[H",		NEWT_KEY_HOME, 		"kh" },
-	{ "\033[1~",		NEWT_KEY_HOME, 		"kh" },
-	{ "\033Ow",		NEWT_KEY_END, 		"kH" },
-	{ "\033[4~",		NEWT_KEY_END, 		"kH" },
-
-	{ "\033[3~",		NEWT_KEY_DELETE,	"kl" },
-	{ "\033[2~", 		NEWT_KEY_INSERT,	NULL },
-
-	{ "\033\t",		NEWT_KEY_UNTAB,		NULL },
-
-	{ "\033[5~",		NEWT_KEY_PGUP,		NULL },
-	{ "\033[6~",		NEWT_KEY_PGDN,		NULL },
-	{ "\033V",		NEWT_KEY_PGUP, 		"kH" },
-	{ "\033v",		NEWT_KEY_PGUP, 		"kH" },
-
-	{ "\033[[A",		NEWT_KEY_F1,		NULL },
-	{ "\033[[B",		NEWT_KEY_F2,		NULL },
-	{ "\033[[C",		NEWT_KEY_F3,		NULL },
-	{ "\033[[D",		NEWT_KEY_F4,		NULL },
-	{ "\033[[E",		NEWT_KEY_F5,		NULL },
-
-	{ "\033OP",		NEWT_KEY_F1,		NULL },
-	{ "\033OQ",		NEWT_KEY_F2,		NULL },
-	{ "\033OR",		NEWT_KEY_F3,		NULL },
-	{ "\033OS",		NEWT_KEY_F4,		NULL },
-
-	{ "\033[11~",		NEWT_KEY_F1,		NULL },
-	{ "\033[12~",		NEWT_KEY_F2,		NULL },
-	{ "\033[13~",		NEWT_KEY_F3,		NULL },
-	{ "\033[14~",		NEWT_KEY_F4,		NULL },
-	{ "\033[15~",		NEWT_KEY_F5,		NULL },
-	{ "\033[17~",		NEWT_KEY_F6,		NULL },
-	{ "\033[18~",		NEWT_KEY_F7,		NULL },
-	{ "\033[19~",		NEWT_KEY_F8,		NULL },
-	{ "\033[20~",		NEWT_KEY_F9,		NULL },
-	{ "\033[21~",		NEWT_KEY_F10,		NULL },
-	{ "\033[23~",		NEWT_KEY_F11,		NULL },
-	{ "\033[24~",		NEWT_KEY_F12,		NULL },
-
-	{ NULL, 	0, 			NULL },	/* LEAVE this one */
-};
-static char keyPrefix = '\033';
-
-static const char * version = "Newt windowing library version " VERSION
-			" - (C) 1996-2000 Red Hat Software. "
-		        "Redistributable under the term of the Library "
-		        "GNU Public License. "
-			"Written by Erik Troan\n";
-
-static newtSuspendCallback suspendCallback = NULL;
-static void * suspendCallbackData = NULL;
-
-void newtSetSuspendCallback(newtSuspendCallback cb, void * data) {
-    suspendCallback = cb;
-    suspendCallbackData = data;
-}
-
-static void handleSigwinch(int signum __attribute__ ((unused))) {
-    needResize = 1;
-}
-
-static int getkeyInterruptHook(void) {
-    return -1;
-}
-
-void newtFlushInput(void) {
-    while (SLang_input_pending(0)) {
-	SLang_getkey();
-    }
-}
-
-void newtRefresh(void) {
-    SLsmg_refresh();
-}
-
-void newtSuspend(void) {
-    SLtt_set_cursor_visibility (1);
-    SLsmg_suspend_smg();
-    SLang_reset_tty();
-    SLtt_set_cursor_visibility (cursorOn);
-}
-
-void newtResume(void) {
-    SLsmg_resume_smg ();
-    SLsmg_refresh();
-    SLang_init_tty(0, 0, 0);
-}
-
-void newtCls(void) {
-    SLsmg_set_color(NEWT_COLORSET_ROOT);
-    SLsmg_gotorc(0, 0);
-    SLsmg_erase_eos();
-
-    newtRefresh();
-}
-
-#if defined(THIS_DOESNT_WORK)
-void newtResizeScreen(int redraw) {
-    newtPushHelpLine("");
-
-    SLtt_get_screen_size();
-    SLang_init_tty(0, 0, 0);
-
-    SLsmg_touch_lines (0, SLtt_Screen_Rows - 1);
-
-    /* I don't know why I need this */
-    SLsmg_refresh();
-
-    newtPopHelpLine();
-
-    if (redraw)
-	SLsmg_refresh();
-}
-#endif
-
-int newtInit(void) {
-    char * MonoValue, * MonoEnv = "NEWT_MONO";
-
-    /* use the version variable just to be sure it gets included */
-    strlen(version);
-
-    SLtt_get_terminfo();
-    SLtt_get_screen_size();
-
-    MonoValue = getenv(MonoEnv);
-    if ( MonoValue == NULL ) {
-	SLtt_Use_Ansi_Colors = 1;
-    } else {
-	SLtt_Use_Ansi_Colors = 0;
-    }
-
-    SLsmg_init_smg();
-    SLang_init_tty(0, 0, 0);
-
-    newtSetColors(newtDefaultColorPalette);
-    newtCursorOff();
-    /*initKeymap();*/
-
-    /*memset(&sa, 0, sizeof(sa));
-    sa.sa_handler = handleSigwinch;
-    sigaction(SIGWINCH, &sa, NULL);*/
-
-    SLsignal_intr(SIGWINCH, handleSigwinch);
-    SLang_getkey_intr_hook = getkeyInterruptHook;
-
-
-
-    return 0;
-}
-
-int newtFinished(void) {
-    SLsmg_gotorc(SLtt_Screen_Rows - 1, 0);
-    newtCursorOn();
-    SLsmg_refresh();
-    SLsmg_reset_smg();
-    SLang_reset_tty();
-
-    return 0;
-}
-
-void newtSetColors(struct newtColors colors) {
-    SLtt_set_color(NEWT_COLORSET_ROOT, "", colors.rootFg, colors.rootBg);
-    SLtt_set_color(NEWT_COLORSET_BORDER, "", colors.borderFg, colors.borderBg);
-    SLtt_set_color(NEWT_COLORSET_WINDOW, "", colors.windowFg, colors.windowBg);
-    SLtt_set_color(NEWT_COLORSET_SHADOW, "", colors.shadowFg, colors.shadowBg);
-    SLtt_set_color(NEWT_COLORSET_TITLE, "", colors.titleFg, colors.titleBg);
-    SLtt_set_color(NEWT_COLORSET_BUTTON, "", colors.buttonFg, colors.buttonBg);
-    SLtt_set_color(NEWT_COLORSET_ACTBUTTON, "", colors.actButtonFg,
-			colors.actButtonBg);
-    SLtt_set_color(NEWT_COLORSET_CHECKBOX, "", colors.checkboxFg,
-			colors.checkboxBg);
-    SLtt_set_color(NEWT_COLORSET_ACTCHECKBOX, "", colors.actCheckboxFg,
-			colors.actCheckboxBg);
-    SLtt_set_color(NEWT_COLORSET_ENTRY, "", colors.entryFg, colors.entryBg);
-    SLtt_set_color(NEWT_COLORSET_LABEL, "", colors.labelFg, colors.labelBg);
-    SLtt_set_color(NEWT_COLORSET_LISTBOX, "", colors.listboxFg,
-			colors.listboxBg);
-    SLtt_set_color(NEWT_COLORSET_ACTLISTBOX, "", colors.actListboxFg,
-			colors.actListboxBg);
-    SLtt_set_color(NEWT_COLORSET_TEXTBOX, "", colors.textboxFg,
-			colors.textboxBg);
-    SLtt_set_color(NEWT_COLORSET_ACTTEXTBOX, "", colors.actTextboxFg,
-			colors.actTextboxBg);
-    SLtt_set_color(NEWT_COLORSET_HELPLINE, "", colors.helpLineFg,
-			colors.helpLineBg);
-    SLtt_set_color(NEWT_COLORSET_ROOTTEXT, "", colors.rootTextFg,
-			colors.rootTextBg);
-
-    SLtt_set_color(NEWT_COLORSET_EMPTYSCALE, "", "black",
-			colors.emptyScale);
-    SLtt_set_color(NEWT_COLORSET_FULLSCALE, "", "black",
-			colors.fullScale);
-    SLtt_set_color(NEWT_COLORSET_DISENTRY, "", colors.disabledEntryFg,
-			colors.disabledEntryBg);
-
-    SLtt_set_color(NEWT_COLORSET_COMPACTBUTTON, "", colors.compactButtonFg,
-			colors.compactButtonBg);
-
-    SLtt_set_color(NEWT_COLORSET_ACTSELLISTBOX, "", colors.actSelListboxFg,
-		   colors.actSelListboxBg);
-    SLtt_set_color(NEWT_COLORSET_SELLISTBOX, "", colors.selListboxFg,
-		   colors.selListboxBg);
-}
-
-int newtGetKey(void) {
-    int key;
-    char buf[10], * chptr = buf;
-    const struct keymap * curr;
-
-    do {
-	key = SLang_getkey();
-	if (key == 0xFFFF) {
-	    if (needResize)
-		return NEWT_KEY_RESIZE;
-
-	    /* ignore other signals */
-	    continue;
-	}
-
-	if (key == NEWT_KEY_SUSPEND && suspendCallback)
-	    suspendCallback(suspendCallbackData);
-    } while (key == NEWT_KEY_SUSPEND);
-
-    switch (key) {
-      case 'v' | 0x80:
-      case 'V' | 0x80:
-	return NEWT_KEY_PGUP;
-
-      case 22:
-	return NEWT_KEY_PGDN;
-
-	return NEWT_KEY_BKSPC;
-      case 0x7f:
-	return NEWT_KEY_BKSPC;
-
-      case 0x08:
-	return NEWT_KEY_BKSPC;
-
-      default:
-	if (key != keyPrefix) return key;
-    }
-
-    memset(buf, 0, sizeof(buf));
-
-    *chptr++ = key;
-    while (SLang_input_pending(5)) {
-	key = SLang_getkey();
-	if (key == keyPrefix) {
-	    /* he hit unknown keys too many times -- start over */
-	    memset(buf, 0, sizeof(buf));
-	    chptr = buf;
-	}
-
-	*chptr++ = key;
-
-	/* this search should use bsearch(), but when we only look through
-	   a list of 20 (or so) keymappings, it's probably faster just to
-	   do a inline linear search */
-
-	for (curr = keymap; curr->code; curr++) {
-	    if (curr->str) {
-		if (!strcmp(curr->str, buf))
-		    return curr->code;
-	    }
-	}
-    }
-
-    for (curr = keymap; curr->code; curr++) {
-	if (curr->str) {
-	    if (!strcmp(curr->str, buf))
-		return curr->code;
-	}
-    }
-
-    /* Looks like we were a bit overzealous in reading characters. Return
-       just the first character, and put everything else back in the buffer
-       for later */
-
-    chptr--;
-    while (chptr > buf)
-	SLang_ungetkey(*chptr--);
-
-    return *chptr;
-}
-
-void newtWaitForKey(void) {
-    newtRefresh();
-
-    SLang_getkey();
-    newtClearKeyBuffer();
-}
-
-void newtClearKeyBuffer(void) {
-    while (SLang_input_pending(1)) {
-	SLang_getkey();
-    }
-}
-
-int newtOpenWindow(int left, int top, int width, int height,
-			  const char * title) {
-    int j, row, col;
-    int n;
-    int i;
-
-    newtFlushInput();
-
-    if (!currentWindow) {
-	currentWindow = windowStack;
-    } else {
-	currentWindow++;
-    }
-
-    currentWindow->left = left;
-    currentWindow->top = top;
-    currentWindow->width = width;
-    currentWindow->height = height;
-    currentWindow->title = title ? strdup(title) : NULL;
-
-    currentWindow->buffer = malloc(sizeof(short) * (width + 3) * (height + 3));
-
-    row = top - 1;
-    col = left - 1;
-    n = 0;
-    for (j = 0; j < height + 3; j++, row++) {
-	SLsmg_gotorc(row, col);
-	SLsmg_read_raw((SLsmg_Char_Type *)currentWindow->buffer + n,
-				currentWindow->width + 3);
-	n += currentWindow->width + 3;
-    }
-
-    SLsmg_set_color(NEWT_COLORSET_BORDER);
-    SLsmg_draw_box(top - 1, left - 1, height + 2, width + 2);
-
-    if (currentWindow->title) {
-	i = strlen(currentWindow->title) + 4;
-	i = ((width - i) / 2) + left;
-	SLsmg_gotorc(top - 1, i);
-	SLsmg_set_char_set(1);
-	SLsmg_write_char(SLSMG_RTEE_CHAR);
-	SLsmg_set_char_set(0);
-	SLsmg_write_char(' ');
-	SLsmg_set_color(NEWT_COLORSET_TITLE);
-	SLsmg_write_string((char *)currentWindow->title);
-	SLsmg_set_color(NEWT_COLORSET_BORDER);
-	SLsmg_write_char(' ');
-	SLsmg_set_char_set(1);
-	SLsmg_write_char(SLSMG_LTEE_CHAR);
-	SLsmg_set_char_set(0);
-    }
-
-    SLsmg_set_color(NEWT_COLORSET_WINDOW);
-    SLsmg_fill_region(top, left, height, width, ' ');
-
-    SLsmg_set_color(NEWT_COLORSET_SHADOW);
-    SLsmg_fill_region(top + height + 1, left, 1, width + 2, ' ');
-    SLsmg_fill_region(top, left + width + 1, height + 1, 1, ' ');
-
-    for (i = top; i < (top + height + 1); i++) {
-	SLsmg_gotorc(i, left + width + 1);
-	SLsmg_write_string(" ");
-    }
-
-    return 0;
-}
-
-int newtCenteredWindow(int width, int height, const char * title) {
-    int top, left;
-
-    top = (SLtt_Screen_Rows - height) / 2;
-
-    /* I don't know why, but this seems to look better */
-    if ((SLtt_Screen_Rows % 2) && (top % 2)) top--;
-
-    left = (SLtt_Screen_Cols - width) / 2;
-
-    newtOpenWindow(left, top, width, height, title);
-
-    return 0;
-}
-
-void newtPopWindow(void) {
-    int j, row, col;
-    int n = 0;
-
-    row = col = 0;
-
-    row = currentWindow->top - 1;
-    col = currentWindow->left - 1;
-    for (j = 0; j < currentWindow->height + 3; j++, row++) {
-	SLsmg_gotorc(row, col);
-	SLsmg_write_raw((SLsmg_Char_Type *)currentWindow->buffer + n,
-				currentWindow->width + 3);
-	n += currentWindow->width + 3;
-    }
-
-    free(currentWindow->buffer);
-    free(currentWindow->title);
-
-    if (currentWindow == windowStack)
-	currentWindow = NULL;
-    else
-	currentWindow--;
-
-    SLsmg_set_char_set(0);
-
-    newtRefresh();
-}
-
-void newtGetWindowPos(int * x, int * y) {
-    if (currentWindow) {
-	*x = currentWindow->left;
-	*y = currentWindow->top;
-    } else
-	*x = *y = 0;
-}
-
-void newtGetrc(int * row, int * col) {
-   *row = cursorRow;
-   *col = cursorCol;
-}
-
-void newtGotorc(int newRow, int newCol) {
-    if (currentWindow) {
-	newRow += currentWindow->top;
-	newCol += currentWindow->left;
-    }
-
-    cursorRow = newRow;
-    cursorCol = newCol;
-    SLsmg_gotorc(cursorRow, cursorCol);
-}
-
-void newtDrawBox(int left, int top, int width, int height, int shadow) {
-    if (currentWindow) {
-	top += currentWindow->top;
-	left += currentWindow->left;
-    }
-
-    SLsmg_draw_box(top, left, height, width);
-
-    if (shadow) {
-	SLsmg_set_color(NEWT_COLORSET_SHADOW);
-	SLsmg_fill_region(top + height, left + 1, 1, width - 1, ' ');
-	SLsmg_fill_region(top + 1, left + width, height, 1, ' ');
-    }
-}
-
-void newtClearBox(int left, int top, int width, int height) {
-    if (currentWindow) {
-	top += currentWindow->top;
-	left += currentWindow->left;
-    }
-
-    SLsmg_fill_region(top, left, height, width, ' ');
-}
-
-#if 0
-/* This doesn't seem to work quite right. I don't know why not, but when
-   I rsh from an rxvt into a box and run this code, the machine returns
-   console key's (\033[B) rather then xterm ones (\033OB). */
-static void initKeymap(void) {
-    struct keymap * curr;
-
-    for (curr = keymap; curr->code; curr++) {
-	if (!curr->str)
-	    curr->str = SLtt_tgetstr(curr->tc);
-    }
-
-    /* Newt's keymap handling is a bit broken. It assumes that any extended
-       keystrokes begin with ESC. If you're using a homebrek terminal you
-       will probably need to fix this, or just yell at me and I'll be so
-       ashamed of myself for doing it this way I'll fix it */
-
-    keyPrefix = 0x1b;		/* ESC */
-}
-#endif
-
-void newtDelay(int usecs) {
-    fd_set set;
-    struct timeval tv;
-
-    FD_ZERO(&set);
-
-    tv.tv_sec = usecs / 1000000;
-    tv.tv_usec = usecs % 1000000;
-
-    select(0, &set, &set, &set, &tv);
-}
-
-struct eventResult newtDefaultEventHandler(newtComponent c __attribute__ ((unused)),
-					   struct event ev __attribute__ ((unused))) {
-    struct eventResult er;
-
-    er.result = ER_IGNORED;
-    return er;
-}
-
-void newtRedrawHelpLine(void) {
-    char * buf;
-
-    SLsmg_set_color(NEWT_COLORSET_HELPLINE);
-
-    buf = alloca(SLtt_Screen_Cols + 1);
-    memset(buf, ' ', SLtt_Screen_Cols);
-    buf[SLtt_Screen_Cols] = '\0';
-
-    if (currentHelpline)
-	memcpy(buf, *currentHelpline, strlen(*currentHelpline));
-
-    SLsmg_gotorc(SLtt_Screen_Rows - 1, 0);
-    SLsmg_write_string(buf);
-}
-
-void newtPushHelpLine(const char * text) {
-    if (!text)
-	text = defaultHelpLine;
-
-    if (currentHelpline)
-	(*(++currentHelpline)) = strdup(text);
-    else {
-	currentHelpline = helplineStack;
-	*currentHelpline = strdup(text);
-    }
-
-    newtRedrawHelpLine();
-}
-
-void newtPopHelpLine(void) {
-    if (!currentHelpline) return;
-
-    free(*currentHelpline);
-    if (currentHelpline == helplineStack)
-	currentHelpline = NULL;
-    else
-	currentHelpline--;
-
-    newtRedrawHelpLine();
-}
-
-void newtDrawRootText(int col, int row, const char * text) {
-    SLsmg_set_color(NEWT_COLORSET_ROOTTEXT);
-
-    if (col < 0) {
-	col = SLtt_Screen_Cols + col;
-    }
-
-    if (row < 0) {
-	row = SLtt_Screen_Rows + row;
-    }
-
-    SLsmg_gotorc(row, col);
-    SLsmg_write_string((char *)text);
-}
-
-int newtSetFlags(int oldFlags, int newFlags, enum newtFlagsSense sense) {
-    switch (sense) {
-      case NEWT_FLAGS_SET:
-	return oldFlags | newFlags;
-
-      case NEWT_FLAGS_RESET:
-	return oldFlags & (~newFlags);
-
-      case NEWT_FLAGS_TOGGLE:
-	return oldFlags ^ newFlags;
-
-      default:
-	return oldFlags;
-    }
-}
-
-void newtBell(void)
-{
-    SLtt_beep();
-}
-
-void newtGetScreenSize(int * cols, int * rows) {
-    if (rows) *rows = SLtt_Screen_Rows;
-    if (cols) *cols = SLtt_Screen_Cols;
-}
-
-void newtDefaultPlaceHandler(newtComponent c, int newLeft, int newTop) {
-    c->left = newLeft;
-    c->top = newTop;
-}
-
-void newtDefaultMappedHandler(newtComponent c, int isMapped) {
-    c->isMapped = isMapped;
-}
-
-void newtCursorOff(void) {
-    cursorOn = 0;
-    SLtt_set_cursor_visibility (cursorOn);
-}
-
-void newtCursorOn(void) {
-    cursorOn = 1;
-    SLtt_set_cursor_visibility (cursorOn);
-}
diff --git a/mdk-stage1/newt/newt.h b/mdk-stage1/newt/newt.h
deleted file mode 100644
index d3fd8bedc..000000000
--- a/mdk-stage1/newt/newt.h
+++ /dev/null
@@ -1,362 +0,0 @@
-#ifndef H_NEWT
-#define H_NEWT
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdarg.h>
-
-#define NEWT_COLORSET_ROOT 		2
-#define NEWT_COLORSET_BORDER 		3
-#define NEWT_COLORSET_WINDOW		4
-#define NEWT_COLORSET_SHADOW		5
-#define NEWT_COLORSET_TITLE		6
-#define NEWT_COLORSET_BUTTON		7
-#define NEWT_COLORSET_ACTBUTTON		8
-#define NEWT_COLORSET_CHECKBOX		9
-#define NEWT_COLORSET_ACTCHECKBOX	10
-#define NEWT_COLORSET_ENTRY		11
-#define NEWT_COLORSET_LABEL		12
-#define NEWT_COLORSET_LISTBOX		13
-#define NEWT_COLORSET_ACTLISTBOX	14
-#define NEWT_COLORSET_TEXTBOX		15
-#define NEWT_COLORSET_ACTTEXTBOX	16
-#define NEWT_COLORSET_HELPLINE		17
-#define NEWT_COLORSET_ROOTTEXT		18
-#define NEWT_COLORSET_EMPTYSCALE	19
-#define NEWT_COLORSET_FULLSCALE		20
-#define NEWT_COLORSET_DISENTRY		21
-#define NEWT_COLORSET_COMPACTBUTTON	22
-#define NEWT_COLORSET_ACTSELLISTBOX	23
-#define NEWT_COLORSET_SELLISTBOX	24
-
-#define NEWT_ARG_LAST			-100000
-#define NEWT_ARG_APPEND			-1
-
-struct newtColors {
-    char * rootFg, * rootBg;
-    char * borderFg, * borderBg;
-    char * windowFg, * windowBg;
-    char * shadowFg, * shadowBg;
-    char * titleFg, * titleBg;
-    char * buttonFg, * buttonBg;
-    char * actButtonFg, * actButtonBg;
-    char * checkboxFg, * checkboxBg;
-    char * actCheckboxFg, * actCheckboxBg;
-    char * entryFg, * entryBg;
-    char * labelFg, * labelBg;
-    char * listboxFg, * listboxBg;
-    char * actListboxFg, * actListboxBg;
-    char * textboxFg, * textboxBg;
-    char * actTextboxFg, * actTextboxBg;
-    char * helpLineFg, * helpLineBg;
-    char * rootTextFg, * rootTextBg;
-    char * emptyScale, * fullScale;
-    char * disabledEntryFg, * disabledEntryBg;
-    char * compactButtonFg, * compactButtonBg;
-    char * actSelListboxFg, * actSelListboxBg;
-    char * selListboxFg, * selListboxBg;
-};
-
-enum newtFlagsSense { NEWT_FLAGS_SET, NEWT_FLAGS_RESET, NEWT_FLAGS_TOGGLE };
-
-#define NEWT_FLAG_RETURNEXIT 	(1 << 0)
-#define NEWT_FLAG_HIDDEN 	(1 << 1)
-#define NEWT_FLAG_SCROLL 	(1 << 2)
-#define NEWT_FLAG_DISABLED 	(1 << 3)
-/* OBSOLETE #define NEWT_FLAG_NOSCROLL 	(1 << 4)	for listboxes */
-#define NEWT_FLAG_BORDER	(1 << 5)
-#define NEWT_FLAG_WRAP		(1 << 6)
-#define NEWT_FLAG_NOF12		(1 << 7)
-#define NEWT_FLAG_MULTIPLE      (1 << 8)
-#define NEWT_FLAG_SELECTED	(1 << 9)
-#define NEWT_FLAG_CHECKBOX	(1 << 10)
-#define NEWT_FLAG_PASSWORD      (1 << 11)  /* draw '*'  of chars in entrybox */
-#define NEWT_FD_READ		(1 << 0)
-#define NEWT_FD_WRITE		(1 << 1)
-
-#define NEWT_CHECKBOXTREE_COLLAPSED	'\0'
-#define NEWT_CHECKBOXTREE_EXPANDED	'\1'
-#define NEWT_CHECKBOXTREE_UNSELECTED	' '
-#define NEWT_CHECKBOXTREE_SELECTED	'*'
-
-/* Backwards compatibility */
-#define NEWT_LISTBOX_RETURNEXIT NEWT_FLAG_RETURNEXIT
-#define NEWT_ENTRY_SCROLL	NEWT_FLAG_SCROLL
-#define NEWT_ENTRY_HIDDEN	NEWT_FLAG_HIDDEN
-#define NEWT_ENTRY_RETURNEXIT	NEWT_FLAG_RETURNEXIT
-#define NEWT_ENTRY_DISABLED	NEWT_FLAG_DISABLED
-
-#define NEWT_TEXTBOX_WRAP	NEWT_FLAG_WRAP
-#define NEWT_TEXTBOX_SCROLL	NEWT_FLAG_SCROLL
-#define NEWT_FORM_NOF12		NEWT_FLAG_NOF12
-
-#define newtListboxAddEntry	newtListboxAppendEntry
-
-
-typedef struct newtComponent_struct * newtComponent;
-
-extern const struct newtColors newtDefaultColorPalette;
-
-typedef void (*newtCallback)(newtComponent, void *);
-typedef void (*newtSuspendCallback)(void * data);
-
-int newtInit(void);
-int newtFinished(void);
-void newtCls(void);
-void newtResizeScreen(int redraw);
-void newtWaitForKey(void);
-void newtClearKeyBuffer(void);
-void newtDelay(int usecs);
-/* top, left are *not* counting the border */
-int newtOpenWindow(int left, int top, int width, int height, 
-			  const char * title);
-int newtCenteredWindow(int width, int height, const char * title);
-void newtPopWindow(void);
-void newtSetColors(struct newtColors colors);
-void newtRefresh(void);
-void newtSuspend(void);
-void newtSetSuspendCallback(newtSuspendCallback cb, void * data);
-void newtSetHelpCallback(newtCallback cb);
-void newtResume(void);
-void newtPushHelpLine(const char * text);
-void newtRedrawHelpLine(void);
-void newtPopHelpLine(void);
-void newtDrawRootText(int col, int row, const char * text);
-void newtBell(void);
-void newtCursorOff(void);
-void newtCursorOn(void);
-
-/* Components */
-
-newtComponent newtCompactButton(int left, int top, const char * text);
-newtComponent newtButton(int left, int top, const char * text);
-newtComponent newtCheckbox(int left, int top, const char * text, char defValue,
-			   const char * seq, char * result);
-char newtCheckboxGetValue(newtComponent co);
-void newtCheckboxSetValue(newtComponent co, char value);
-void newtCheckboxSetFlags(newtComponent co, int flags, enum newtFlagsSense sense);
-
-    
-newtComponent newtRadiobutton(int left, int top, const char * text, int isDefault,
-			      newtComponent prevButton);
-newtComponent newtRadioGetCurrent(newtComponent setMember);
-newtComponent newtListitem(int left, int top, const char * text, int isDefault,
-			      newtComponent prevItem, const void * data, int flags);
-void newtListitemSet(newtComponent co, const char * text);
-void * newtListitemGetData(newtComponent co);
-void newtGetScreenSize(int * cols, int * rows);
-
-newtComponent newtLabel(int left, int top, const char * text);
-void newtLabelSetText(newtComponent co, const char * text);
-newtComponent newtVerticalScrollbar(int left, int top, int height,
-				    int normalColorset, int thumbColorset);
-void newtScrollbarSet(newtComponent co, int where, int total);
-
-newtComponent newtListbox(int left, int top, int height, int flags);
-void * newtListboxGetCurrent(newtComponent co);
-void newtListboxSetCurrent(newtComponent co, int num);
-void newtListboxSetCurrentByKey(newtComponent co, void * key);
-void newtListboxSetEntry(newtComponent co, int num, const char * text);
-void newtListboxSetWidth(newtComponent co, int width);
-void newtListboxSetData(newtComponent co, int num, void * data);
-int newtListboxAppendEntry(newtComponent co, const char * text, 
-			   const void * data);
-/* Send the key to insert after, or NULL to insert at the top */
-int newtListboxInsertEntry(newtComponent co, const char * text, const void * data, void * key);
-int newtListboxDeleteEntry(newtComponent co, void * data);
-void newtListboxClear(newtComponent co); /* removes all entries from listbox */
-void newtListboxGetEntry(newtComponent co, int num, char **text, void **data);
-/* Returns an array of data pointers from items, last element is NULL */
-void **newtListboxGetSelection(newtComponent co, int *numitems);
-void newtListboxClearSelection(newtComponent co);
-void newtListboxSelectItem(newtComponent co, const void * key,
-	enum newtFlagsSense sense);
-
-newtComponent newtCheckboxTree(int left, int top, int height, int flags);
-newtComponent newtCheckboxTreeMulti(int left, int top, int height, char *seq, int flags);
-const void ** newtCheckboxTreeGetSelection(newtComponent co, int *numitems);
-const void * newtCheckboxTreeGetCurrent(newtComponent co);
-const void ** newtCheckboxTreeGetMultiSelection(newtComponent co, int *numitems, char seqnum);
-/* last item is NEWT_ARG_LAST for all of these */
-int newtCheckboxTreeAddItem(newtComponent co, 
-			    const char * text, const void * data,
-			    int flags, int index, ...);
-int newtCheckboxTreeAddArray(newtComponent co, 
-			     const char * text, const void * data,
-			     int flags, int * indexes);
-int * newtCheckboxTreeFindItem(newtComponent co, void * data);
-void newtCheckboxTreeSetEntry(newtComponent co, const void * data,
-			      const char * text);
-char newtCheckboxTreeGetEntryValue(newtComponent co, const void * data);
-void newtCheckboxTreeSetEntryValue(newtComponent co, const void * data,
-				   char value);
-    
-newtComponent newtTextboxReflowed(int left, int top, char * text, int width,
-				  int flexDown, int flexUp, int flags);
-newtComponent newtTextbox(int left, int top, int width, int height, int flags);
-void newtTextboxSetText(newtComponent co, const char * text);
-void newtTextboxSetHeight(newtComponent co, int height);
-int newtTextboxGetNumLines(newtComponent co);
-char * newtReflowText(char * text, int width, int flexDown, int flexUp,
-		      int * actualWidth, int * actualHeight);
-
-struct newtExitStruct {
-    enum { NEWT_EXIT_HOTKEY, NEWT_EXIT_COMPONENT, NEWT_EXIT_FDREADY,
-	   NEWT_EXIT_TIMER } reason;
-    union {
-	int key;
-	newtComponent co;
-    } u;
-} ;
-
-newtComponent newtForm(newtComponent vertBar, void * helpTag, int flags);
-void newtFormSetTimer(newtComponent form, int millisecs);
-void newtFormWatchFd(newtComponent form, int fd, int fdFlags);
-void newtFormSetSize(newtComponent co);
-newtComponent newtFormGetCurrent(newtComponent co);
-void newtFormSetBackground(newtComponent co, int color);
-void newtFormSetCurrent(newtComponent co, newtComponent subco);
-void newtFormAddComponent(newtComponent form, newtComponent co);
-void newtFormAddComponents(newtComponent form, ...);
-void newtFormSetHeight(newtComponent co, int height);
-void newtFormSetWidth(newtComponent co, int width);
-newtComponent newtRunForm(newtComponent form);		/* obsolete */
-void newtFormRun(newtComponent co, struct newtExitStruct * es);
-void newtDrawForm(newtComponent form);
-void newtFormAddHotKey(newtComponent co, int key);
-
-typedef int (*newtEntryFilter)(newtComponent entry, void * data, int ch,
-			       int cursor);
-newtComponent newtEntry(int left, int top, const char * initialValue, int width,
-			char ** resultPtr, int flags);
-void newtEntrySet(newtComponent co, const char * value, int cursorAtEnd);
-void newtEntrySetFilter(newtComponent co, newtEntryFilter filter, void * data);
-char * newtEntryGetValue(newtComponent co);
-void newtEntrySetFlags(newtComponent co, int flags, enum newtFlagsSense sense);
-
-newtComponent newtScale(int left, int top, int width, int fullValue);
-void newtScaleSet(newtComponent co, unsigned int amount);
-
-void newtComponentAddCallback(newtComponent co, newtCallback f, void * data);
-void newtComponentTakesFocus(newtComponent co, int val);
-
-/* this also destroys all of the components (including other forms) on the 
-   form */
-void newtFormDestroy(newtComponent form);	
-
-/* Key codes */
-
-#define NEWT_KEY_TAB			'\t'
-#define NEWT_KEY_ENTER			'\r'
-#define NEWT_KEY_SUSPEND		'\032'			/* ctrl - z*/
-#define NEWT_KEY_RETURN			NEWT_KEY_ENTER
-
-#define NEWT_KEY_EXTRA_BASE		0x8000
-#define NEWT_KEY_UP			NEWT_KEY_EXTRA_BASE + 1
-#define NEWT_KEY_DOWN			NEWT_KEY_EXTRA_BASE + 2
-#define NEWT_KEY_LEFT			NEWT_KEY_EXTRA_BASE + 4
-#define NEWT_KEY_RIGHT			NEWT_KEY_EXTRA_BASE + 5
-#define NEWT_KEY_BKSPC			NEWT_KEY_EXTRA_BASE + 6
-#define NEWT_KEY_DELETE			NEWT_KEY_EXTRA_BASE + 7
-#define NEWT_KEY_HOME			NEWT_KEY_EXTRA_BASE + 8
-#define NEWT_KEY_END			NEWT_KEY_EXTRA_BASE + 9
-#define NEWT_KEY_UNTAB			NEWT_KEY_EXTRA_BASE + 10
-#define NEWT_KEY_PGUP			NEWT_KEY_EXTRA_BASE + 11
-#define NEWT_KEY_PGDN			NEWT_KEY_EXTRA_BASE + 12
-#define NEWT_KEY_INSERT			NEWT_KEY_EXTRA_BASE + 13
-
-#define NEWT_KEY_F1			NEWT_KEY_EXTRA_BASE + 101
-#define NEWT_KEY_F2			NEWT_KEY_EXTRA_BASE + 102
-#define NEWT_KEY_F3			NEWT_KEY_EXTRA_BASE + 103
-#define NEWT_KEY_F4			NEWT_KEY_EXTRA_BASE + 104
-#define NEWT_KEY_F5			NEWT_KEY_EXTRA_BASE + 105
-#define NEWT_KEY_F6			NEWT_KEY_EXTRA_BASE + 106
-#define NEWT_KEY_F7			NEWT_KEY_EXTRA_BASE + 107
-#define NEWT_KEY_F8			NEWT_KEY_EXTRA_BASE + 108
-#define NEWT_KEY_F9			NEWT_KEY_EXTRA_BASE + 109
-#define NEWT_KEY_F10			NEWT_KEY_EXTRA_BASE + 110
-#define NEWT_KEY_F11			NEWT_KEY_EXTRA_BASE + 111
-#define NEWT_KEY_F12			NEWT_KEY_EXTRA_BASE + 112
-
-/* not really a key, but newtGetKey returns it */
-#define NEWT_KEY_RESIZE			NEWT_KEY_EXTRA_BASE + 113
-
-#define NEWT_ANCHOR_LEFT		(1 << 0)
-#define NEWT_ANCHOR_RIGHT		(1 << 1)
-#define NEWT_ANCHOR_TOP			(1 << 2)
-#define NEWT_ANCHOR_BOTTOM		(1 << 3)
-
-#define NEWT_GRID_FLAG_GROWX		(1 << 0)
-#define NEWT_GRID_FLAG_GROWY		(1 << 1)
-
-typedef struct grid_s * newtGrid;
-enum newtGridElement { NEWT_GRID_EMPTY = 0,
-		       NEWT_GRID_COMPONENT, NEWT_GRID_SUBGRID };
-
-newtGrid newtCreateGrid(int cols, int rows);
-/* TYPE, what, TYPE, what, ..., NULL */
-newtGrid newtGridVStacked(enum newtGridElement type, void * what, ...);
-newtGrid newtGridVCloseStacked(enum newtGridElement type, void * what, ...);
-newtGrid newtGridHStacked(enum newtGridElement type1, void * what1, ...);
-newtGrid newtGridHCloseStacked(enum newtGridElement type1, void * what1, ...);
-newtGrid newtGridBasicWindow(newtComponent text, newtGrid middle,
-			     newtGrid buttons);
-newtGrid newtGridSimpleWindow(newtComponent text, newtComponent middle,
-			     newtGrid buttons);
-void newtGridSetField(newtGrid grid, int col, int row, 
-		      enum newtGridElement type, void * val, int padLeft,
-		      int padTop, int padRight, int padBottom, int anchor,
-		      int flags);
-void newtGridPlace(newtGrid grid, int left, int top);
-#define newtGridDestroy newtGridFree
-void newtGridFree(newtGrid grid, int recurse);
-void newtGridGetSize(newtGrid grid, int * width, int * height);
-void newtGridWrappedWindow(newtGrid grid, char * title);
-void newtGridWrappedWindowAt(newtGrid grid, char * title, int left, int top);
-void newtGridAddComponentsToForm(newtGrid grid, newtComponent form, 
-				 int recurse);
-
-/* convienve */
-newtGrid newtButtonBarv(char * button1, newtComponent * b1comp, va_list args);
-newtGrid newtButtonBar(char * button1, newtComponent * b1comp, ...);
-
-/* automatically centered and shrink wrapped */
-void newtWinMessage(char * title, char * buttonText, char * text, ...);
-void newtWinMessagev(char * title, char * buttonText, char * text, 
-		     va_list argv);
-
-/* having separate calls for these two seems silly, but having two separate
-   variable length-arg lists seems like a bad idea as well */
-
-/* Returns 0 if F12 was pressed, 1 for button1, 2 for button2 */
-int newtWinChoice(char * title, char * button1, char * button2, 
-		   char * text, ...);
-/* Returns 0 if F12 was pressed, 1 for button1, 2 for button2, 
-   3 for button3 */
-int newtWinTernary(char * title, char * button1, char * button2, 
-		   char * button3, char * message, ...);
-
-/* Returns the button number pressed, 0 on F12 */
-int newtWinMenu(char * title, char * text, int suggestedWidth, int flexDown, 
-		int flexUp, int maxListHeight, char ** items, int * listItem,
-		char * button1, ...);
-
-struct newtWinEntry {
-    char * text;
-    char ** value;		/* may be initialized to set default */
-    int flags;
-};
-
-/* Returns the button number pressed, 0 on F12. The final values are
-   dynamically allocated, and need to be freed. */
-int newtWinEntries(char * title, char * text, int suggestedWidth, int flexDown, 
-		   int flexUp, int dataWidth, 
-		   struct newtWinEntry * items, char * button1, ...);
-
-#ifdef __cplusplus
-} /* End of extern "C" { */
-#endif
-
-#endif /* H_NEWT */
diff --git a/mdk-stage1/newt/newt_pr.h b/mdk-stage1/newt/newt_pr.h
deleted file mode 100644
index 76f5e2f6f..000000000
--- a/mdk-stage1/newt/newt_pr.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef H_NEWT_PR
-#define H_NEWT_PR
-
-#define COLORSET_ROOT 		NEWT_COLORSET_ROOT
-#define COLORSET_BORDER 	NEWT_COLORSET_BORDER
-#define COLORSET_WINDOW		NEWT_COLORSET_WINDOW
-#define COLORSET_SHADOW		NEWT_COLORSET_SHADOW
-#define COLORSET_TITLE		NEWT_COLORSET_TITLE
-#define COLORSET_BUTTON		NEWT_COLORSET_BUTTON
-#define COLORSET_ACTBUTTON	NEWT_COLORSET_ACTBUTTON
-#define COLORSET_CHECKBOX	NEWT_COLORSET_CHECKBOX
-#define COLORSET_ACTCHECKBOX	NEWT_COLORSET_ACTCHECKBOX
-#define COLORSET_ENTRY		NEWT_COLORSET_ENTRY
-#define COLORSET_LABEL		NEWT_COLORSET_LABEL
-#define COLORSET_LISTBOX	NEWT_COLORSET_LISTBOX
-#define COLORSET_ACTLISTBOX	NEWT_COLORSET_ACTLISTBOX
-#define COLORSET_TEXTBOX	NEWT_COLORSET_TEXTBOX
-#define COLORSET_ACTTEXTBOX	NEWT_COLORSET_ACTTEXTBOX
-
-int newtSetFlags(int oldFlags, int newFlags, enum newtFlagsSense sense);
-
-void newtGotorc(int row, int col);
-void newtGetrc(int * row, int * col);
-void newtGetWindowPos(int * x, int * y);
-void newtDrawBox(int left, int top, int width, int height, int shadow);
-void newtClearBox(int left, int top, int width, int height);
-
-int newtGetKey(void);
-
-struct newtComponent_struct {
-    /* common data */
-    int height, width;
-    int top, left;
-    int takesFocus;
-    int isMapped;
-
-    struct componentOps * ops;
-
-    newtCallback callback;
-    void * callbackData;
-
-    void * data;
-} ;
-
-enum eventResultTypes { ER_IGNORED, ER_SWALLOWED, ER_EXITFORM, ER_SETFOCUS,
-			ER_NEXTCOMP };
-struct eventResult {
-    enum eventResultTypes result;
-    union {
-	newtComponent focus;
-    } u;
-};
-
-enum eventTypes { EV_FOCUS, EV_UNFOCUS, EV_KEYPRESS, EV_MOUSE };
-enum eventSequence { EV_EARLY, EV_NORMAL, EV_LATE };
-
-struct event {
-    enum eventTypes event;
-    enum eventSequence when;
-    union {
-	int key;
-	struct {
-	    enum { MOUSE_MOTION, MOUSE_BUTTON_DOWN, MOUSE_BUTTON_UP } type;
-	    int x, y;
-	} mouse;
-    } u;
-} ;
-
-struct componentOps {
-    void (* draw)(newtComponent c);
-    struct eventResult (* event)(newtComponent c, struct event ev);
-    void (* destroy)(newtComponent c);
-    void (* place)(newtComponent c, int newLeft, int newTop);
-    void (* mapped)(newtComponent c, int isMapped);
-} ;
-
-void newtDefaultPlaceHandler(newtComponent c, int newLeft, int newTop);
-void newtDefaultMappedHandler(newtComponent c, int isMapped);
-struct eventResult newtDefaultEventHandler(newtComponent c,
-					   struct event ev);
-
-#endif /* H_NEWT_PR */
diff --git a/mdk-stage1/newt/scale.c b/mdk-stage1/newt/scale.c
deleted file mode 100644
index 800958580..000000000
--- a/mdk-stage1/newt/scale.c
+++ /dev/null
@@ -1,72 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct scale {
-    int fullValue;
-    int charsSet;
-};
-
-static void scaleDraw(newtComponent co);
-
-static struct componentOps scaleOps = {
-    scaleDraw,
-    newtDefaultEventHandler,
-    NULL,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-newtComponent newtScale(int left, int top, int width, int fullValue) {
-    newtComponent co;
-    struct scale * sc;
-
-    co = malloc(sizeof(*co));
-    sc = malloc(sizeof(struct scale));
-    co->data = sc;
-
-    co->ops = &scaleOps;
-
-    co->height = 1;
-    co->width = width;
-    co->top = top;
-    co->left = left;
-    co->takesFocus = 0;
-
-    sc->fullValue = fullValue;
-    sc->charsSet = 0;
-
-    return co;
-}
-
-void newtScaleSet(newtComponent co, unsigned int amount) {
-    struct scale * sc = co->data;
-    int newCharsSet;
-
-    newCharsSet = (amount * co->width) / sc->fullValue;
-    
-    if (newCharsSet != sc->charsSet) {
-	sc->charsSet = newCharsSet;
-	scaleDraw(co);
-    }
-}
-
-static void scaleDraw(newtComponent co) {
-    struct scale * sc = co->data;
-    int i;
-
-    if (co->top == -1) return;
-
-    newtGotorc(co->top, co->left);
-
-    SLsmg_set_color(NEWT_COLORSET_FULLSCALE);
-    for (i = 0; i < sc->charsSet; i++)
-	SLsmg_write_string(" ");
-
-    SLsmg_set_color(NEWT_COLORSET_EMPTYSCALE);
-    for (i = 0; i < (co->width - sc->charsSet); i++)
-	SLsmg_write_string(" ");
-}
diff --git a/mdk-stage1/newt/scrollbar.c b/mdk-stage1/newt/scrollbar.c
deleted file mode 100644
index cb4bc2757..000000000
--- a/mdk-stage1/newt/scrollbar.c
+++ /dev/null
@@ -1,124 +0,0 @@
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct scrollbar {
-    int curr;
-    int cs, csThumb;
-    int arrows;
-} ;
-
-static void sbDraw(newtComponent co);
-static void sbDestroy(newtComponent co);
-static void sbDrawThumb(newtComponent co, int isOn);
-
-static struct componentOps sbOps = {
-    sbDraw,
-    newtDefaultEventHandler,
-    sbDestroy,
-    newtDefaultPlaceHandler,
-    newtDefaultMappedHandler,
-} ;
-
-void newtScrollbarSet(newtComponent co, int where, int total) {
-    struct scrollbar * sb = co->data;
-    int new;
-
-    if (sb->arrows)
-	new = (where * (co->height - 3)) / (total ? total : 1) + 1;
-    else
-	new = (where * (co->height - 1)) / (total ? total : 1);
-    if (new != sb->curr) {
-	sbDrawThumb(co, 0);
-	sb->curr = new;
-	sbDrawThumb(co, 1);
-    }
-}
-
-newtComponent newtVerticalScrollbar(int left, int top, int height,
-				    int normalColorset, int thumbColorset) {
-    newtComponent co;
-    struct scrollbar * sb;
-
-    co = malloc(sizeof(*co));
-    sb = malloc(sizeof(*sb));
-    co->data = sb;
-
-    if (!strcmp(getenv("TERM"), "linux") && height >= 2) {
-	sb->arrows = 1;
-	sb->curr = 1;
-    } else {
-	sb->arrows = 0;
-	sb->curr = 0;
-    }
-    sb->cs = normalColorset;
-    sb->csThumb = thumbColorset;
-
-    co->ops = &sbOps;
-    co->isMapped = 0;
-    co->left = left;
-    co->top = top;
-    co->height = height;
-    co->width = 1;
-    co->takesFocus = 0;  
-    
-    return co;
-}
-
-static void sbDraw(newtComponent co) {
-    struct scrollbar * sb = co->data;
-    int i;
-
-    if (!co->isMapped) return;
-
-    SLsmg_set_color(sb->cs);
-
-    SLsmg_set_char_set(1);
-    if (sb->arrows) {
-	newtGotorc(co->top, co->left);
- 	SLsmg_write_char('\x2d');
-	for (i = 1; i < co->height - 1; i++) {
-	    newtGotorc(i + co->top, co->left);
-	    SLsmg_write_char('\x61');
-	}
-	newtGotorc(co->top + co->height - 1, co->left);
- 	SLsmg_write_char('\x2e');
-    } else {
-	for (i = 0; i < co->height; i++) {
-	    newtGotorc(i + co->top, co->left);
-	    SLsmg_write_char('\x61');
-	}
-    }
-
-    SLsmg_set_char_set(0);
-
-    sbDrawThumb(co, 1);
-}
-
-static void sbDrawThumb(newtComponent co, int isOn) {
-    struct scrollbar * sb = co->data;
-    char ch = isOn ? '#' : '\x61';
-
-    if (!co->isMapped) return;
-
-    newtGotorc(sb->curr + co->top, co->left);
-    SLsmg_set_char_set(1);
-
-    /*if (isOn)
-	SLsmg_set_color(sb->csThumb);
-    else*/
-	SLsmg_set_color(sb->cs);
-
-    SLsmg_write_char(ch);
-    SLsmg_set_char_set(0);
-}
-
-static void sbDestroy(newtComponent co) {
-    struct scrollbar * sb = co->data;
- 
-    free(sb);
-    free(co);
-}
diff --git a/mdk-stage1/newt/textbox.c b/mdk-stage1/newt/textbox.c
deleted file mode 100644
index 8eb4ae4db..000000000
--- a/mdk-stage1/newt/textbox.c
+++ /dev/null
@@ -1,409 +0,0 @@
-#include <ctype.h>
-#include <slang.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "newt.h"
-#include "newt_pr.h"
-
-struct textbox {
-    char ** lines;
-    int numLines;
-    int linesAlloced;
-    int doWrap;
-    newtComponent sb;
-    int topLine;
-    int textWidth;
-};
-
-static char * expandTabs(const char * text);
-static void textboxDraw(newtComponent co);
-static void addLine(newtComponent co, const char * s, int len);
-static void doReflow(const char * text, char ** resultPtr, int width, 
-		     int * badness, int * heightPtr);
-static struct eventResult textboxEvent(newtComponent c,
-				      struct event ev);
-static void textboxDestroy(newtComponent co);
-static void textboxPlace(newtComponent co, int newLeft, int newTop);
-static void textboxMapped(newtComponent co, int isMapped);
-
-static struct componentOps textboxOps = {
-    textboxDraw,
-    textboxEvent,
-    textboxDestroy,
-    textboxPlace,
-    textboxMapped,
-} ;
-
-static void textboxMapped(newtComponent co, int isMapped) {
-    struct textbox * tb = co->data;
-
-    co->isMapped = isMapped;
-    if (tb->sb)
-	tb->sb->ops->mapped(tb->sb, isMapped);
-}
-
-static void textboxPlace(newtComponent co, int newLeft, int newTop) {
-    struct textbox * tb = co->data;
-
-    co->top = newTop;
-    co->left = newLeft;
-
-    if (tb->sb)
-	tb->sb->ops->place(tb->sb, co->left + co->width - 1, co->top);
-}
-
-void newtTextboxSetHeight(newtComponent co, int height) {
-    co->height = height;
-}
-
-int newtTextboxGetNumLines(newtComponent co) {
-    struct textbox * tb = co->data;
-
-    return (tb->numLines);
-}
-
-newtComponent newtTextboxReflowed(int left, int top, char * text, int width,
-				  int flexDown, int flexUp, int flags __attribute__ ((unused))) {
-    newtComponent co;
-    char * reflowedText;
-    int actWidth, actHeight;
-
-    reflowedText = newtReflowText(text, width, flexDown, flexUp,
-				  &actWidth, &actHeight);
-    
-    co = newtTextbox(left, top, actWidth, actHeight, NEWT_FLAG_WRAP);
-    newtTextboxSetText(co, reflowedText);
-    free(reflowedText);
-
-    return co;
-}
-
-newtComponent newtTextbox(int left, int top, int width, int height, int flags) {
-    newtComponent co;
-    struct textbox * tb;
-
-    co = malloc(sizeof(*co));
-    tb = malloc(sizeof(*tb));
-    co->data = tb;
-
-    co->ops = &textboxOps;
-
-    co->height = height;
-    co->top = top;
-    co->left = left;
-    co->takesFocus = 0;
-    co->width = width;
-
-    tb->doWrap = flags & NEWT_FLAG_WRAP;
-    tb->numLines = 0;
-    tb->linesAlloced = 0;
-    tb->lines = NULL;
-    tb->topLine = 0;
-    tb->textWidth = width;
-
-    if (flags & NEWT_FLAG_SCROLL) {
-	co->width += 2;
-	tb->sb = newtVerticalScrollbar(co->left + co->width - 1, co->top, 
-			   co->height, COLORSET_TEXTBOX, COLORSET_TEXTBOX);
-    } else {
-	tb->sb = NULL;
-    }
-
-    return co;
-}
-
-static char * expandTabs(const char * text) {
-    int bufAlloced = strlen(text) + 40;
-    char * buf, * dest;
-    const char * src;
-    int bufUsed = 0;
-    int linePos = 0;
-    int i;
-
-    buf = malloc(bufAlloced + 1);
-    for (src = text, dest = buf; *src; src++) {
-	if ((bufUsed + 10) > bufAlloced) {
-	    bufAlloced += strlen(text) / 2;
-	    buf = realloc(buf, bufAlloced + 1);
-	    dest = buf + bufUsed;
-	}
-	if (*src == '\t') {
-	    i = 8 - (linePos & 8);
-	    memset(dest, ' ', i);
-	    dest += i, bufUsed += i, linePos += i;
-	} else {
-	    if (*src == '\n')
-		linePos = 0;
-	    else
-		linePos++;
-
-	    *dest++ = *src;
-	    bufUsed++;
-	}
-    }
-
-    *dest = '\0';
-    return buf;
-}
-
-#define iseuckanji(c)   (0xa1 <= (unsigned char)(c&0xff) && (unsigned char)(c&0xff) <= 0xfe)
-
-static void doReflow(const char * text, char ** resultPtr, int width, 
-		     int * badness, int * heightPtr) {
-    char * result = NULL;
-    const char * chptr, * end;
-    int i;
-    int howbad = 0;
-    int height = 0;
-    int kanji = 0;
-
-    if (resultPtr) {
-	/* XXX I think this will work */
-	result = malloc(strlen(text) + (strlen(text) / width) + 50);
-	*result = '\0';
-    }
-
-    while (*text) {
-        kanji = 0;
-	end = strchr(text, '\n');
-	if (!end)
-	    end = text + strlen(text);
-
-	while (*text && text < end) {
-	    if (end - text < width) {
-		if (result) {
-		    strncat(result, text, end - text);
-		    strcat(result, "\n");
-		    height++;
-		}
-
-		if (end - text < (width / 2))
-		    howbad += ((width / 2) - (end - text)) / 2;
-		text = end;
-		if (*text) text++;
-	    } else {
-	        chptr = text;
-	        kanji = 0;
-	        for ( i = 0; i < width - 1; i++ ) {
-		    if ( !iseuckanji(*chptr)) {
-			kanji = 0;
-		    } else if ( kanji == 1 ) {
-		        kanji = 2; 
-		    } else {
-		        kanji = 1;
-		    }
-		    chptr++;
-		}
-	        if (kanji == 0) {
-		    while (chptr > text && !isspace(*chptr)) chptr--;
-		    while (chptr > text && isspace(*chptr)) chptr--;
-		    chptr++;
-		}
-		
-		if (chptr-text == 1 && !isspace(*chptr))
-		  chptr = text + width - 1;
-
-		if (chptr > text)
-		    howbad += width - (chptr - text) + 1;
-		if (result) {
-		  if (kanji == 1) {
-		    strncat(result, text, chptr - text + 1);
-		    chptr++;
-		    kanji = 0;
-		  } else {
-		    strncat(result, text, chptr - text);
-		  }
-		    strcat(result, "\n");
-		    height++;
-		}
-
-	        if (isspace(*chptr))
-		    text = chptr + 1;
-		else
-		  text = chptr;
-		while (isspace(*text)) text++;
-	    }
-	}
-    }
-
-//    if (result) printf("result: %s\n", result);
-
-    if (badness) *badness = howbad;
-    if (resultPtr) *resultPtr = result;
-    if (heightPtr) *heightPtr = height;
-}
-
-char * newtReflowText(char * text, int width, int flexDown, int flexUp,
-		      int * actualWidth, int * actualHeight) {
-    int min, max;
-    int i;
-    char * result;
-    int minbad, minbadwidth, howbad;
-    char * expandedText;
-
-    expandedText = expandTabs(text);
-
-    if (flexDown || flexUp) {
-	min = width - flexDown;
-	max = width + flexUp;
-
-	minbad = -1;
-	minbadwidth = width;
-
-	for (i = min; i <= max; i++) {
-	    doReflow(expandedText, NULL, i, &howbad, NULL);
-
-	    if (minbad == -1 || howbad < minbad) {
-		minbad = howbad;
-		minbadwidth = i;
-	    }
- 	}
-
-	width = minbadwidth;
-    }
-
-    doReflow(expandedText, &result, width, NULL, actualHeight);
-    free(expandedText);
-    if (actualWidth) *actualWidth = width;
-    return result;
-}
-
-void newtTextboxSetText(newtComponent co, const char * text) {
-    const char * start, * end;
-    struct textbox * tb = co->data;
-    char * reflowed, * expanded;
-    int badness, height;
-
-    if (tb->lines) {
-	free(tb->lines);
-	tb->linesAlloced = tb->numLines = 0;
-    }
-
-    expanded = expandTabs(text);
-
-    if (tb->doWrap) {
-	doReflow(expanded, &reflowed, tb->textWidth, &badness, &height);
-	free(expanded);
-	expanded = reflowed;
-    }
-
-    for (start = expanded; *start; start++)
-	if (*start == '\n') tb->linesAlloced++;
-
-    /* This ++ leaves room for an ending line w/o a \n */
-    tb->linesAlloced++;
-    tb->lines = malloc(sizeof(char *) * tb->linesAlloced);
-
-    start = expanded;
-    while ((end = strchr(start, '\n'))) {
-	addLine(co, start, end - start);
-	start = end + 1;
-    }
-
-    if (*start)
-	addLine(co, start, strlen(start));
-
-    free(expanded);
-}
-
-/* This assumes the buffer is allocated properly! */
-static void addLine(newtComponent co, const char * s, int len) {
-    struct textbox * tb = co->data;
-
-    if (len > tb->textWidth) len = tb->textWidth;
-
-    tb->lines[tb->numLines] = malloc(tb->textWidth + 1);
-    memset(tb->lines[tb->numLines], ' ', tb->textWidth); 
-    memcpy(tb->lines[tb->numLines], s, len);
-    tb->lines[tb->numLines++][tb->textWidth] = '\0';
-}
-
-static void textboxDraw(newtComponent c) {
-    int i;
-    struct textbox * tb = c->data;
-    int size;
-
-    if (tb->sb) {
-	size = tb->numLines - c->height;
-	newtScrollbarSet(tb->sb, tb->topLine, size ? size : 0);
-	tb->sb->ops->draw(tb->sb);
-    }
-
-    SLsmg_set_color(NEWT_COLORSET_TEXTBOX);
-   
-    for (i = 0; (i + tb->topLine) < tb->numLines && i < c->height; i++) {
-	newtGotorc(c->top + i, c->left);
-	SLsmg_write_string(tb->lines[i + tb->topLine]);
-    }
-}
-
-static struct eventResult textboxEvent(newtComponent co, 
-				      struct event ev) {
-    struct textbox * tb = co->data;
-    struct eventResult er;
-
-    er.result = ER_IGNORED;
-
-    if (ev.when == EV_EARLY && ev.event == EV_KEYPRESS && tb->sb) {
-	switch (ev.u.key) {
-	  case NEWT_KEY_UP:
-	    if (tb->topLine) tb->topLine--;
-	    textboxDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_DOWN:
-	    if (tb->topLine < (tb->numLines - co->height)) tb->topLine++;
-	    textboxDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_PGDN:
-	    tb->topLine += co->height;
-	    if (tb->topLine > (tb->numLines - co->height)) {
-		tb->topLine = tb->numLines - co->height;
-		if (tb->topLine < 0) tb->topLine = 0;
-	    }
-	    textboxDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-
-	  case NEWT_KEY_PGUP:
-	    tb->topLine -= co->height;
-	    if (tb->topLine < 0) tb->topLine = 0;
-	    textboxDraw(co);
-	    er.result = ER_SWALLOWED;
-	    break;
-	}
-    }
-    if (ev.when == EV_EARLY && ev.event == EV_MOUSE && tb->sb) {
-	/* Top scroll arrow */
-	if (ev.u.mouse.x == co->width && ev.u.mouse.y == co->top) {
-	    if (tb->topLine) tb->topLine--;
-	    textboxDraw(co);
-	    
-	    er.result = ER_SWALLOWED;
-	}
-	/* Bottom scroll arrow */
-	if (ev.u.mouse.x == co->width &&
-	    ev.u.mouse.y == co->top + co->height - 1) {
-	    if (tb->topLine < (tb->numLines - co->height)) tb->topLine++;
-	    textboxDraw(co);
-	    
-	    er.result = ER_SWALLOWED;
-	}
-    }
-    return er;
-}
-
-static void textboxDestroy(newtComponent co) {
-    int i;
-    struct textbox * tb = co->data;
-
-    for (i = 0; i < tb->numLines; i++) 
-	free(tb->lines[i]);
-    free(tb->lines);
-    free(tb);
-    free(co);
-}
diff --git a/mdk-stage1/newt/windows.c b/mdk-stage1/newt/windows.c
deleted file mode 100644
index 30a8d526c..000000000
--- a/mdk-stage1/newt/windows.c
+++ /dev/null
@@ -1,275 +0,0 @@
-#include <errno.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "errno.h"
-#include "newt.h"
-
-static void * newtvwindow(char * title, char * button1, char * button2, 
-		       char * button3, char * message, va_list args) {
-    newtComponent b1, b2 = NULL, b3 = NULL, t, f, answer;
-    char * buf = NULL;
-    int size = 0;
-    int i = 0;
-    int scroll = 0;
-    int width, height;
-    char * flowedText;
-    newtGrid grid, buttonGrid;
-
-    do {
-	size += 1000;
-	if (buf) free(buf);
-	buf = malloc(size);
-	i = vsnprintf(buf, size, message, args);
-    } while (i >= size || i == -1);
-
-    flowedText = newtReflowText(buf, 50, 5, 5, &width, &height);
-    if (height > 6) {
-	free(flowedText);
-	flowedText = newtReflowText(buf, 60, 5, 5, &width, &height);
-    }
-    free(buf);
-
-    if (height > 12) {
-	height = 12;
-	scroll = NEWT_FLAG_SCROLL;
-    }
-    t = newtTextbox(-1, -1, width, height, NEWT_TEXTBOX_WRAP | scroll);
-    newtTextboxSetText(t, flowedText);
-    free(flowedText);
-
-    if (button3) {
-	buttonGrid = newtButtonBar(button1, &b1, button2, &b2, 
-				   button3, &b3, NULL);
-    } else if (button2) {
-	buttonGrid = newtButtonBar(button1, &b1, button2, &b2, NULL);
-    } else {
-	buttonGrid = newtButtonBar(button1, &b1, NULL);
-    }
-
-    newtGridSetField(buttonGrid, 0, 0, NEWT_GRID_COMPONENT, b1, 
-		     0, 0, button2 ? 1 : 0, 0, 0, 0);
-
-    grid = newtCreateGrid(1, 2);
-    newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, t, 0, 0, 0, 0, 0, 0);
-    newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, buttonGrid, 
-		     0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-    newtGridWrappedWindow(grid, title);
-
-    f = newtForm(NULL, NULL, 0);
-    newtFormAddComponents(f, t, b1, NULL);
-
-    if (button2)
-	newtFormAddComponent(f, b2);
-    if (button3)
-	newtFormAddComponent(f, b3);
-
-    answer = newtRunForm(f);
-    newtGridFree(grid, 1);
- 
-    newtFormDestroy(f);
-    newtPopWindow();
-
-    if (answer == f)
-	return NULL;
-    else if (answer == b1)
-	return button1;
-    else if (answer == b2)
-	return button2;
-
-    return button3;
-}
-
-int newtWinChoice(char * title, char * button1, char * button2, 
-		   char * message, ...) {
-    va_list args;
-    void * rc;
-
-    va_start(args, message);
-    rc = newtvwindow(title, button1, button2, NULL, message, args);
-    va_end(args);
-
-    if (rc == button1)
-	return 1;
-    else if (rc == button2)
-	return 2;
-
-    return 0;
-}
-
-void newtWinMessage(char * title, char * buttonText, char * text, ...) {
-    va_list args;
-
-    va_start(args, text);
-    newtvwindow(title, buttonText, NULL, NULL, text, args);
-    va_end(args);
-}
-
-void newtWinMessagev(char * title, char * buttonText, char * text, 
-		     va_list argv) {
-    newtvwindow(title, buttonText, NULL, NULL, text, argv);
-}
-
-int newtWinTernary(char * title, char * button1, char * button2, 
-		   char * button3, char * message, ...) {
-    va_list args;
-    void * rc;
-
-    va_start(args, message);
-    rc = newtvwindow(title, button1, button2, button3, message, args);
-    va_end(args);
-
-    if (rc == button1)
-	return 1;
-    else if (rc == button2)
-	return 2;
-    else if (rc == button3)
-	return 3;
-
-    return 0;
-}
-
-/* only supports up to 50 buttons -- shucks! */
-int newtWinMenu(char * title, char * text, int suggestedWidth, int flexDown, 
-		int flexUp, int maxListHeight, char ** items, int * listItem,
-		char * button1, ...) {
-    newtComponent textbox, listbox, result, form;
-    va_list args;
-    newtComponent buttons[50];
-    newtGrid grid, buttonBar;
-    int numButtons;
-    int i, rc;
-    int needScroll;
-    char * buttonName;
-
-    textbox = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
-			          flexUp, 0);
-
-    for (i = 0; items[i]; i++) ;
-    if (i < maxListHeight) maxListHeight = i;
-    needScroll = i > maxListHeight;
-
-    listbox = newtListbox(-1, -1, maxListHeight, 
-		  (needScroll ? NEWT_FLAG_SCROLL : 0) | NEWT_FLAG_RETURNEXIT);
-    for (i = 0; items[i]; i++) {
-	newtListboxAddEntry(listbox, items[i], (void *) (long)i);
-    }
-
-    newtListboxSetCurrent(listbox, *listItem);
-
-    buttonName = button1, numButtons = 0;
-    va_start(args, button1);
-    while (buttonName) {
-	buttons[numButtons] = newtButton(-1, -1, buttonName);
-	numButtons++;
-	buttonName = va_arg(args, char *);
-    }
-
-    va_end(args);
-
-    buttonBar = newtCreateGrid(numButtons, 1);
-    for (i = 0; i < numButtons; i++) {
-	newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT, 
-			 buttons[i],
-			 i ? 1 : 0, 0, 0, 0, 0, 0);
-    }
-
-    grid = newtGridSimpleWindow(textbox, listbox, buttonBar);
-    newtGridWrappedWindow(grid, title);
-
-    form = newtForm(NULL, 0, 0);
-    newtGridAddComponentsToForm(grid, form, 1);
-    newtGridFree(grid, 1);
-
-    result = newtRunForm(form);
-
-    *listItem = ((long) newtListboxGetCurrent(listbox));
-
-    for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
-    if (rc == numButtons) 
-	rc = 0; /* F12 or return-on-exit (which are the same for us) */
-    else 
-	rc++;
-
-    newtFormDestroy(form);
-    newtPopWindow();
-
-    return rc;
-}
-
-/* only supports up to 50 buttons and entries -- shucks! */
-int newtWinEntries(char * title, char * text, int suggestedWidth, int flexDown, 
-		   int flexUp, int dataWidth, 
-		   struct newtWinEntry * items, char * button1, ...) {
-    newtComponent buttons[50], result, form, textw;
-    newtGrid grid, buttonBar, subgrid;
-    int numItems;
-    int rc, i;
-    int numButtons;
-    char * buttonName;
-    va_list args;
-
-    textw = newtTextboxReflowed(-1, -1, text, suggestedWidth, flexDown,
-			        flexUp, 0);
-
-    for (numItems = 0; items[numItems].text; numItems++); 
-
-    buttonName = button1, numButtons = 0;
-    va_start(args, button1);
-    while (buttonName) {
-	buttons[numButtons] = newtButton(-1, -1, buttonName);
-	numButtons++;
-	buttonName = va_arg(args, char *);
-    }
-
-    va_end(args);
-
-    buttonBar = newtCreateGrid(numButtons, 1);
-    for (i = 0; i < numButtons; i++) {
-	newtGridSetField(buttonBar, i, 0, NEWT_GRID_COMPONENT, 
-			 buttons[i],
-			 i ? 1 : 0, 0, 0, 0, 0, 0);
-    }
-
-    subgrid = newtCreateGrid(2, numItems);
-    for (i = 0; i < numItems; i++) {
-	newtGridSetField(subgrid, 0, i, NEWT_GRID_COMPONENT,
-		         newtLabel(-1, -1, items[i].text),
-		         0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-	newtGridSetField(subgrid, 1, i, NEWT_GRID_COMPONENT,
-		         newtEntry(-1, -1, items[i].value ? 
-				    *items[i].value : NULL, dataWidth,
-				    items[i].value, items[i].flags),
-		         1, 0, 0, 0, 0, 0);
-    }
-
-    grid = newtCreateGrid(1, 3);
-    form = newtForm(NULL, 0, 0);
-    newtGridSetField(grid, 0, 0, NEWT_GRID_COMPONENT, textw, 
-		     0, 0, 0, 0, NEWT_ANCHOR_LEFT, 0);
-    newtGridSetField(grid, 0, 1, NEWT_GRID_SUBGRID, subgrid, 
-		     0, 1, 0, 0, 0, 0);
-    newtGridSetField(grid, 0, 2, NEWT_GRID_SUBGRID, buttonBar, 
-		     0, 1, 0, 0, 0, NEWT_GRID_FLAG_GROWX);
-    newtGridAddComponentsToForm(grid, form, 1);
-    newtGridWrappedWindow(grid, title);
-    newtGridFree(grid, 1);
-
-    result = newtRunForm(form);
-
-    for (rc = 0; rc < numItems; rc++)
-	*items[rc].value = strdup(*items[rc].value);
-
-    for (rc = 0; result != buttons[rc] && rc < numButtons; rc++);
-    if (rc == numButtons) 
-	rc = 0; /* F12 */
-    else 
-	rc++;
-
-    newtFormDestroy(form);
-    newtPopWindow();
-
-    return rc;
-}
diff --git a/mdk-stage1/nfs_mount4.h b/mdk-stage1/nfs_mount4.h
deleted file mode 100644
index 85650773a..000000000
--- a/mdk-stage1/nfs_mount4.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * We want to be able to compile mount on old kernels in such a way
- * that the binary will work well on more recent kernels.
- * Thus, if necessary we teach nfsmount.c the structure of new fields
- * that will come later.
- *
- * Moreover, the new kernel includes conflict with glibc includes
- * so it is easiest to ignore the kernel altogether (at compile time).
- */
-
-#define NFS_MOUNT_VERSION	4
-
-struct nfs2_fh {
-        char                    data[32];
-};
-struct nfs3_fh {
-        unsigned short          size;
-        unsigned char           data[64];
-};
-
-struct nfs_mount_data {
-	int		version;		/* 1 */
-	int		fd;			/* 1 */
-	struct nfs2_fh	old_root;		/* 1 */
-	int		flags;			/* 1 */
-	int		rsize;			/* 1 */
-	int		wsize;			/* 1 */
-	int		timeo;			/* 1 */
-	int		retrans;		/* 1 */
-	int		acregmin;		/* 1 */
-	int		acregmax;		/* 1 */
-	int		acdirmin;		/* 1 */
-	int		acdirmax;		/* 1 */
-	struct sockaddr_in addr;		/* 1 */
-	char		hostname[256];		/* 1 */
-	int		namlen;			/* 2 */
-	unsigned int	bsize;			/* 3 */
-	struct nfs3_fh	root;			/* 4 */
-};
-
-/* bits in the flags field */
-
-#define NFS_MOUNT_SOFT		0x0001	/* 1 */
-#define NFS_MOUNT_INTR		0x0002	/* 1 */
-#define NFS_MOUNT_SECURE	0x0004	/* 1 */
-#define NFS_MOUNT_POSIX		0x0008	/* 1 */
-#define NFS_MOUNT_NOCTO		0x0010	/* 1 */
-#define NFS_MOUNT_NOAC		0x0020	/* 1 */
-#define NFS_MOUNT_TCP		0x0040	/* 2 */
-#define NFS_MOUNT_VER3		0x0080	/* 3 */
-#define NFS_MOUNT_KERBEROS	0x0100	/* 3 */
-#define NFS_MOUNT_NONLM		0x0200	/* 3 */
-#define NFS_MOUNT_BROKEN_SUID	0x0400	/* 4 */
-
diff --git a/mdk-stage1/nfsmount.c b/mdk-stage1/nfsmount.c
deleted file mode 100644
index 55a0b0b1e..000000000
--- a/mdk-stage1/nfsmount.c
+++ /dev/null
@@ -1,740 +0,0 @@
- /*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2003 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * basing on nfsmount.c from util-linux-2.11z:
- * - use our logging facilities
- * - use our host resolving stuff
- * - remove unneeded code
- */
-
-/*
- * nfsmount.c -- Linux NFS mount
- * Copyright (C) 1993 Rick Sladkey <jrs@world.std.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * Wed Feb  8 12:51:48 1995, biro@yggdrasil.com (Ross Biro): allow all port
- * numbers to be specified on the command line.
- *
- * Fri, 8 Mar 1996 18:01:39, Swen Thuemmler <swen@uni-paderborn.de>:
- * Omit the call to connect() for Linux version 1.3.11 or later.
- *
- * Wed Oct  1 23:55:28 1997: Dick Streefland <dick_streefland@tasking.com>
- * Implemented the "bg", "fg" and "retry" mount options for NFS.
- *
- * 1999-02-22 Arkadiusz Mi�kiewicz <misiek@pld.ORG.PL>
- * - added Native Language Support
- * 
- * Modified by Olaf Kirch and Trond Myklebust for new NFS code,
- * plus NFSv3 stuff.
- *
- * 2003-04-14 David Black <david.black@xilinx.com>
- * - added support for multiple hostname NFS mounts
- */
-
-/*
- * nfsmount.c,v 1.1.1.1 1993/11/18 08:40:51 jrs Exp
- */
-
-#define HAVE_rpcsvc_nfs_prot_h
-#define HAVE_inet_aton
-
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <netdb.h>
-#include <time.h>
-#include <rpc/rpc.h>
-#include <rpc/pmap_prot.h>
-#include <rpc/pmap_clnt.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/utsname.h>
-#include <sys/stat.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#include <values.h>
-
-#include "nfsmount.h"
-
-#ifdef HAVE_rpcsvc_nfs_prot_h
-#include <rpcsvc/nfs_prot.h>
-#else
-#include <linux/nfs.h>
-#define nfsstat nfs_stat
-#endif
-
-#include "nfs_mount4.h"
-
-#include "log.h"
-#include "dns.h"
-
-#ifndef NFS_PORT
-#define NFS_PORT 2049
-#endif
-#ifndef NFS_FHSIZE
-#define NFS_FHSIZE 32
-#endif
-
-static char *nfs_strerror(int stat);
-
-#define MAKE_VERSION(p,q,r)	(65536*(p) + 256*(q) + (r))
-
-#define MAX_NFSPROT ((nfs_mount_version >= 4) ? 3 : 2)
-
-bool_t
-xdr_fhandle3 (XDR *xdrs, fhandle3 *objp)
-{
-	 if (!xdr_bytes (xdrs, (char **)&objp->fhandle3_val, (u_int *) &objp->fhandle3_len, FHSIZE3))
-		 return FALSE;
-	return TRUE;
-}
-
-bool_t
-xdr_mountstat3 (XDR *xdrs, mountstat3 *objp)
-{
-	 if (!xdr_enum (xdrs, (enum_t *) objp))
-		 return FALSE;
-	return TRUE;
-}
-
-bool_t
-xdr_mountres3_ok (XDR *xdrs, mountres3_ok *objp)
-{
-	 if (!xdr_fhandle3 (xdrs, &objp->fhandle))
-		 return FALSE;
-	 if (!xdr_array (xdrs, (char **)&objp->auth_flavours.auth_flavours_val, (u_int *) &objp->auth_flavours.auth_flavours_len, ~0,
-		sizeof (int), (xdrproc_t) xdr_int))
-		 return FALSE;
-	return TRUE;
-}
-
-bool_t
-xdr_mountres3 (XDR *xdrs, mountres3 *objp)
-{
-	 if (!xdr_mountstat3 (xdrs, &objp->fhs_status))
-		 return FALSE;
-	switch (objp->fhs_status) {
-	case MNT_OK:
-		 if (!xdr_mountres3_ok (xdrs, &objp->mountres3_u.mountinfo))
-			 return FALSE;
-		break;
-	default:
-		break;
-	}
-	return TRUE;
-}
-
-bool_t
-xdr_dirpath (XDR *xdrs, dirpath *objp)
-{
-	 if (!xdr_string (xdrs, objp, MNTPATHLEN))
-		 return FALSE;
-	return TRUE;
-}
-
-bool_t
-xdr_fhandle (XDR *xdrs, fhandle objp)
-{
-	 if (!xdr_opaque (xdrs, objp, FHSIZE))
-		 return FALSE;
-	return TRUE;
-}
-
-bool_t
-xdr_fhstatus (XDR *xdrs, fhstatus *objp)
-{
-	 if (!xdr_u_int (xdrs, &objp->fhs_status))
-		 return FALSE;
-	switch (objp->fhs_status) {
-	case 0:
-		 if (!xdr_fhandle (xdrs, objp->fhstatus_u.fhs_fhandle))
-			 return FALSE;
-		break;
-	default:
-		break;
-	}
-	return TRUE;
-}
-
-
-static int
-linux_version_code(void) {
-	struct utsname my_utsname;
-	int p, q, r;
-
-	if (uname(&my_utsname) == 0) {
-		p = atoi(strtok(my_utsname.release, "."));
-		q = atoi(strtok(NULL, "."));
-		r = atoi(strtok(NULL, "."));
-		return MAKE_VERSION(p,q,r);
-	}
-	return 0;
-}
-
-/*
- * Unfortunately, the kernel prints annoying console messages
- * in case of an unexpected nfs mount version (instead of
- * just returning some error).  Therefore we'll have to try
- * and figure out what version the kernel expects.
- *
- * Variables:
- *	NFS_MOUNT_VERSION: these nfsmount sources at compile time
- *	nfs_mount_version: version this source and running kernel can handle
- */
-static int
-find_kernel_nfs_mount_version(void) {
-	static int kernel_version = -1;
-	int nfs_mount_version = NFS_MOUNT_VERSION;
-
-	if (kernel_version == -1)
-		kernel_version = linux_version_code();
-
-	if (kernel_version) {
-	     if (kernel_version < MAKE_VERSION(2,1,32))
-		  nfs_mount_version = 1;
-	     else if (kernel_version < MAKE_VERSION(2,2,18))
-		  nfs_mount_version = 3;
-	     else if (kernel_version < MAKE_VERSION(2,3,0))
-		  nfs_mount_version = 4; /* since 2.2.18pre9 */
-	     else if (kernel_version < MAKE_VERSION(2,3,99))
-		  nfs_mount_version = 3;
-	     else
-		  nfs_mount_version = 4; /* since 2.3.99pre4 */
-	}
-	if (nfs_mount_version > NFS_MOUNT_VERSION)
-	     nfs_mount_version = NFS_MOUNT_VERSION;
-        log_message("nfsmount: kernel_nfs_mount_version: %d", nfs_mount_version);
-	return nfs_mount_version;
-}
-
-static struct pmap *
-get_mountport(struct sockaddr_in *server_addr,
-      long unsigned prog,
-      long unsigned version,
-      long unsigned proto,
-      long unsigned port,
-      int nfs_mount_version)
-{
-	struct pmaplist *pmap;
-	static struct pmap p = {0, 0, 0, 0};
-
-	if (version > MAX_NFSPROT)
-		version = MAX_NFSPROT;
-	if (!prog)
-		prog = MOUNTPROG;
-	p.pm_prog = prog;
-	p.pm_vers = version;
-	p.pm_prot = proto;
-	p.pm_port = port;
-
-	server_addr->sin_port = PMAPPORT;
-	pmap = pmap_getmaps(server_addr);
-
-	while (pmap) {
-		if (pmap->pml_map.pm_prog != prog)
-			goto next;
-		if (!version && p.pm_vers > pmap->pml_map.pm_vers)
-			goto next;
-		if (version > 2 && pmap->pml_map.pm_vers != version)
-			goto next;
-		if (version && version <= 2 && pmap->pml_map.pm_vers > 2)
-			goto next;
-		if (pmap->pml_map.pm_vers > MAX_NFSPROT ||
-		    (proto && p.pm_prot && pmap->pml_map.pm_prot != proto) ||
-		    (port && pmap->pml_map.pm_port != port))
-			goto next;
-		memcpy(&p, &pmap->pml_map, sizeof(p));
-	next:
-		pmap = pmap->pml_next;
-	}
-	if (!p.pm_vers)
-		p.pm_vers = MOUNTVERS;
-	if (!p.pm_prot)
-		p.pm_prot = IPPROTO_TCP;
-	return &p;
-}
-
-
-
-int nfsmount_prepare(const char *spec, char **mount_opts)
-{
-	char hostdir[1024];
-	CLIENT *mclient;
-	char *hostname, *dirname, *mounthost = NULL;
-	struct timeval total_timeout;
-	enum clnt_stat clnt_stat;
-	static struct nfs_mount_data data;
-	int nfs_mount_version;
-	int val;
-	struct sockaddr_in server_addr;
-	struct sockaddr_in mount_server_addr;
-	struct pmap *pm_mnt;
-	int msock, fsock;
-	struct timeval retry_timeout;
-	union {
-		struct fhstatus nfsv2;
-		struct mountres3 nfsv3;
-	} status;
-	char *s;
-	int port, mountport, proto, soft, intr;
-	int posix, nocto, noac, broken_suid, nolock;
-	int retry, tcp;
-	int mountprog, mountvers, nfsprog, nfsvers;
-	int retval;
-	time_t t;
-	time_t prevt;
-	time_t timeout;
-
-	nfs_mount_version = find_kernel_nfs_mount_version();
-
-	retval = -1;
-	msock = fsock = -1;
-	mclient = NULL;
-	if (strlen(spec) >= sizeof(hostdir)) {
-		log_message("nfsmount: excessively long host:dir argument");
-		goto fail;
-	}
-	strcpy(hostdir, spec);
-	if ((s = strchr(hostdir, ':'))) {
-		hostname = hostdir;
-		dirname = s + 1;
-		*s = '\0';
-	} else {
-		log_message("nfsmount: directory to mount not in host:dir format");
-		goto fail;
-	}
-
-	server_addr.sin_family = AF_INET;
-#ifdef HAVE_inet_aton
-	if (!inet_aton(hostname, &server_addr.sin_addr))
-#endif
-	{
-		if (mygethostbyname(hostname, &server_addr.sin_addr)) {
-			log_message("nfsmount: can't get address for %s", hostname);
-			goto fail;
-		}
-	}
-
-	memcpy (&mount_server_addr, &server_addr, sizeof (mount_server_addr));
-
-
-
-	/* Set default options.
-	 * rsize/wsize are set to 8192 to enable nfs install on
-	 * old i586 machines
-	 * timeo is filled in after we know whether it'll be TCP or UDP. */
-	memset(&data, 0, sizeof(data));
-	data.rsize	= 8192;
-	data.wsize	= 8192;
-	data.retrans	= 30;
-	data.acregmin	= 3;
-	data.acregmax	= 60;
-	data.acdirmin	= 30;
-	data.acdirmax	= 60;
-#if NFS_MOUNT_VERSION >= 2
-	data.namlen	= NAME_MAX;
-#endif
-
-	soft = 1;
-	intr = 0;
-	posix = 0;
-	nocto = 0;
-	nolock = 1;
-	broken_suid = 0;
-	noac = 0;
-	retry = 10000;		/* 10000 minutes ~ 1 week */
-	tcp = 0;
-
-	mountprog = MOUNTPROG;
-	mountvers = 0;
-	port = 0;
-	mountport = 0;
-	nfsprog = NFS_PROGRAM;
-	nfsvers = 0;
-
-
-
-retry_mount:
-	proto = (tcp) ? IPPROTO_TCP : IPPROTO_UDP;
-
-	data.flags = (soft ? NFS_MOUNT_SOFT : 0)
-		| (intr ? NFS_MOUNT_INTR : 0)
-		| (posix ? NFS_MOUNT_POSIX : 0)
-		| (nocto ? NFS_MOUNT_NOCTO : 0)
-		| (noac ? NFS_MOUNT_NOAC : 0);
-#if NFS_MOUNT_VERSION >= 2
-	if (nfs_mount_version >= 2)
-		data.flags |= (tcp ? NFS_MOUNT_TCP : 0);
-#endif
-#if NFS_MOUNT_VERSION >= 3
-	if (nfs_mount_version >= 3)
-		data.flags |= (nolock ? NFS_MOUNT_NONLM : 0);
-#endif
-#if NFS_MOUNT_VERSION >= 4
-	if (nfs_mount_version >= 4)
-		data.flags |= (broken_suid ? NFS_MOUNT_BROKEN_SUID : 0);
-#endif
-	if (nfsvers > MAX_NFSPROT) {
-		log_message("NFSv%d not supported!", nfsvers);
-		return 0;
-	}
-	if (mountvers > MAX_NFSPROT) {
-		log_message("NFSv%d not supported!", nfsvers);
-		return 0;
-	}
-	if (nfsvers && !mountvers)
-		mountvers = (nfsvers < 3) ? 1 : nfsvers;
-	if (nfsvers && nfsvers < mountvers)
-		mountvers = nfsvers;
-
-	/* Adjust options if none specified */
-	if (!data.timeo)
-		data.timeo = tcp ? 70 : 7;
-
-#ifdef NFS_MOUNT_DEBUG
-	log_message("rsize = %d, wsize = %d, timeo = %d, retrans = %d",
-	       data.rsize, data.wsize, data.timeo, data.retrans);
-	log_message("acreg (min, max) = (%d, %d), acdir (min, max) = (%d, %d)",
-	       data.acregmin, data.acregmax, data.acdirmin, data.acdirmax);
-	log_message("port = %d, retry = %d, flags = %.8x",
-	       port, retry, data.flags);
-	log_message("mountprog = %d, mountvers = %d, nfsprog = %d, nfsvers = %d",
-	       mountprog, mountvers, nfsprog, nfsvers);
-	log_message("soft = %d, intr = %d, posix = %d, nocto = %d, noac = %d",
-	       (data.flags & NFS_MOUNT_SOFT) != 0,
-	       (data.flags & NFS_MOUNT_INTR) != 0,
-	       (data.flags & NFS_MOUNT_POSIX) != 0,
-	       (data.flags & NFS_MOUNT_NOCTO) != 0,
-	       (data.flags & NFS_MOUNT_NOAC) != 0);
-#if NFS_MOUNT_VERSION >= 2
-	log_message("tcp = %d",
-	       (data.flags & NFS_MOUNT_TCP) != 0);
-#endif
-#endif
-
-	data.version = nfs_mount_version;
-	*mount_opts = (char *) &data;
-
-
-	/* create mount deamon client */
-	/* See if the nfs host = mount host. */
-	if (mounthost) {
-		if (mounthost[0] >= '0' && mounthost[0] <= '9') {
-			mount_server_addr.sin_family = AF_INET;
-			mount_server_addr.sin_addr.s_addr = inet_addr(hostname);
-		} else {
-                        if (mygethostbyname(mounthost, &mount_server_addr.sin_addr)) {
-				log_message("nfsmount: can't get address for %s", mounthost);
-				goto fail;
-			}
-		}
-	}
-
-	/*
-	 * The following loop implements the mount retries. On the first
-	 * call, "running_bg" is 0. When the mount times out, and the
-	 * "bg" option is set, the exit status EX_BG will be returned.
-	 * For a backgrounded mount, there will be a second call by the
-	 * child process with "running_bg" set to 1.
-	 *
-	 * The case where the mount point is not present and the "bg"
-	 * option is set, is treated as a timeout. This is done to
-	 * support nested mounts.
-	 *
-	 * The "retry" count specified by the user is the number of
-	 * minutes to retry before giving up.
-	 *
-	 * Only the first error message will be displayed.
-	 */
-	retry_timeout.tv_sec = 3;
-	retry_timeout.tv_usec = 0;
-	total_timeout.tv_sec = 20;
-	total_timeout.tv_usec = 0;
-	timeout = time(NULL) + 60 * retry;
-	prevt = 0;
-	t = 30;
-	val = 1;
-
-
-			/* be careful not to use too many CPU cycles */
-			if (t - prevt < 30)
-				sleep(30);
-
-			pm_mnt = get_mountport(&mount_server_addr,
-					       mountprog,
-					       mountvers,
-					       proto,
-					       mountport,
-					       nfs_mount_version);
-
-			/* contact the mount daemon via TCP */
-			mount_server_addr.sin_port = htons(pm_mnt->pm_port);
-			msock = RPC_ANYSOCK;
-
-			switch (pm_mnt->pm_prot) {
-			case IPPROTO_UDP:
-				mclient = clntudp_create(&mount_server_addr,
-							 pm_mnt->pm_prog,
-							 pm_mnt->pm_vers,
-							 retry_timeout,
-							 &msock);
-				if (mclient)
-					break;
-				mount_server_addr.sin_port =
-					htons(pm_mnt->pm_port);
-				msock = RPC_ANYSOCK;
-			case IPPROTO_TCP:
-				mclient = clnttcp_create(&mount_server_addr,
-							 pm_mnt->pm_prog,
-							 pm_mnt->pm_vers,
-							 &msock, 0, 0);
-				break;
-			default:
-				mclient = 0;
-			}
-
-			if (mclient) {
-				/* try to mount hostname:dirname */
-				mclient->cl_auth = authunix_create_default();
-
-				/* make pointers in xdr_mountres3 NULL so
-				 * that xdr_array allocates memory for us
-				 */
-				memset(&status, 0, sizeof(status));
-
-				log_message("nfsmount: doing client call in nfs version: %ld", pm_mnt->pm_vers);
-				if (pm_mnt->pm_vers == 3)
-					clnt_stat = clnt_call(mclient,
-						     MOUNTPROC3_MNT,
-						     (xdrproc_t) xdr_dirpath,
-						     (caddr_t) &dirname,
-						     (xdrproc_t) xdr_mountres3,
-						     (caddr_t) &status,
-						     total_timeout);
-				else
-					clnt_stat = clnt_call(mclient,
-						     MOUNTPROC_MNT,
-						     (xdrproc_t) xdr_dirpath,
-						     (caddr_t) &dirname,
-						     (xdrproc_t) xdr_fhstatus,
-						     (caddr_t) &status,
-						     total_timeout);
-
-				if (clnt_stat == RPC_SUCCESS)
-                                        goto succeeded;
-
-                                if (prevt == 0)
-                                        log_message("could not call server: probably protocol or version error");
-                                auth_destroy(mclient->cl_auth);
-                                clnt_destroy(mclient);
-                                mclient = 0;
-                                close(msock);
-			} else {
-                                log_message("could not create rpc client: host probably not found or NFS server is down");
-			}
-			prevt = t;
-
-		        goto fail;
-
- succeeded:
-	nfsvers = (pm_mnt->pm_vers < 2) ? 2 : pm_mnt->pm_vers;
-
-	if (nfsvers == 2) {
-		if (status.nfsv2.fhs_status != 0) {
-			log_message("nfsmount: %s:%s failed, reason given by server: %s",
-                                    hostname, dirname, nfs_strerror(status.nfsv2.fhs_status));
-			goto fail;
-		}
-		memcpy(data.root.data,
-		       (char *) status.nfsv2.fhstatus_u.fhs_fhandle,
-		       NFS_FHSIZE);
-#if NFS_MOUNT_VERSION >= 4
-		data.root.size = NFS_FHSIZE;
-		memcpy(data.old_root.data,
-		       (char *) status.nfsv2.fhstatus_u.fhs_fhandle,
-		       NFS_FHSIZE);
-#endif
-	} else {
-#if NFS_MOUNT_VERSION >= 4
-		fhandle3 *fhandle;
-		if (status.nfsv3.fhs_status != 0) {
-			log_message("nfsmount: %s:%s failed, reason given by server: %s",
-                                    hostname, dirname, nfs_strerror(status.nfsv3.fhs_status));
-			goto fail;
-		}
-		fhandle = &status.nfsv3.mountres3_u.mountinfo.fhandle;
-		memset(data.old_root.data, 0, NFS_FHSIZE);
-		memset(&data.root, 0, sizeof(data.root));
-		data.root.size = fhandle->fhandle3_len;
-		memcpy(data.root.data,
-		       (char *) fhandle->fhandle3_val,
-		       fhandle->fhandle3_len);
-
-		data.flags |= NFS_MOUNT_VER3;
-#endif
-	}
-
-	/* create nfs socket for kernel */
-
-	if (tcp) {
-		if (nfs_mount_version < 3) {
-	     		log_message("NFS over TCP is not supported.");
-			goto fail;
-		}
-		fsock = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
-	} else
-		fsock = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
-	if (fsock < 0) {
-		log_perror("nfs socket");
-		goto fail;
-	}
-	if (bindresvport(fsock, 0) < 0) {
-		log_perror("nfs bindresvport");
-		goto fail;
-	}
-	if (port == 0) {
-		server_addr.sin_port = PMAPPORT;
-		port = pmap_getport(&server_addr, nfsprog, nfsvers,
-				    tcp ? IPPROTO_TCP : IPPROTO_UDP);
-#if 1
-		/* Here we check to see if user is mounting with the
-		 * tcp option.  If so, and if the portmap returns a
-		 * '0' for port (service unavailable), we then notify
-		 * the user, and retry with udp.
-		 */
-		if (port == 0 && tcp == 1) {
-			log_message("NFS server reported TCP not available, retrying with UDP...");
-			tcp = 0;
-			goto retry_mount;
-		}
-#endif
-
-		if (port == 0)
-			port = NFS_PORT;
-#ifdef NFS_MOUNT_DEBUG
-		else
-			log_message("used portmapper to find NFS port");
-#endif
-	}
-#ifdef NFS_MOUNT_DEBUG
-	log_message("using port %d for nfs deamon", port);
-#endif
-	server_addr.sin_port = htons(port);
-	/*
-	 * connect() the socket for kernels 1.3.10 and below only,
-	 * to avoid problems with multihomed hosts.
-	 * --Swen
-	 */
-	if (linux_version_code() <= 66314
-	    && connect(fsock, (struct sockaddr *) &server_addr,
-		       sizeof (server_addr)) < 0) {
-		log_perror("nfs connect");
-		goto fail;
-	}
-
-	/* prepare data structure for kernel */
-
-	data.fd = fsock;
-	memcpy((char *) &data.addr, (char *) &server_addr, sizeof(data.addr));
-	strncpy(data.hostname, hostname, sizeof(data.hostname));
-
-	/* clean up */
-
-	auth_destroy(mclient->cl_auth);
-	clnt_destroy(mclient);
-	close(msock);
-	return 0;
-
-	/* abort */
-
- fail:
-	if (msock != -1) {
-		if (mclient) {
-			auth_destroy(mclient->cl_auth);
-			clnt_destroy(mclient);
-		}
-		close(msock);
-	}
-	if (fsock != -1)
-		close(fsock);
-	return retval;
-}	
-
-/*
- * We need to translate between nfs status return values and
- * the local errno values which may not be the same.
- *
- * Andreas Schwab <schwab@LS5.informatik.uni-dortmund.de>: change errno:
- * "after #include <errno.h> the symbol errno is reserved for any use,
- *  it cannot even be used as a struct tag or field name".
- */
-
-#ifndef EDQUOT
-#define EDQUOT	ENOSPC
-#endif
-
-static struct {
-	enum nfsstat stat;
-	int errnum;
-} nfs_errtbl[] = {
-	{ NFS_OK,		0		},
-	{ NFSERR_PERM,		EPERM		},
-	{ NFSERR_NOENT,		ENOENT		},
-	{ NFSERR_IO,		EIO		},
-	{ NFSERR_NXIO,		ENXIO		},
-	{ NFSERR_ACCES,		EACCES		},
-	{ NFSERR_EXIST,		EEXIST		},
-	{ NFSERR_NODEV,		ENODEV		},
-	{ NFSERR_NOTDIR,	ENOTDIR		},
-	{ NFSERR_ISDIR,		EISDIR		},
-#ifdef NFSERR_INVAL
-	{ NFSERR_INVAL,		EINVAL		},	/* that Sun forgot */
-#endif
-	{ NFSERR_FBIG,		EFBIG		},
-	{ NFSERR_NOSPC,		ENOSPC		},
-	{ NFSERR_ROFS,		EROFS		},
-	{ NFSERR_NAMETOOLONG,	ENAMETOOLONG	},
-	{ NFSERR_NOTEMPTY,	ENOTEMPTY	},
-	{ NFSERR_DQUOT,		EDQUOT		},
-	{ NFSERR_STALE,		ESTALE		},
-#ifdef EWFLUSH
-	{ NFSERR_WFLUSH,	EWFLUSH		},
-#endif
-	/* Throw in some NFSv3 values for even more fun (HP returns these) */
-	{ 71,			EREMOTE		},
-
-	{ -1,			EIO		}
-};
-
-static char *nfs_strerror(int stat)
-{
-	int i;
-	static char buf[256];
-
-	for (i = 0; nfs_errtbl[i].stat != (unsigned)-1; i++) {
-		if (nfs_errtbl[i].stat == (unsigned)stat)
-			return strerror(nfs_errtbl[i].errnum);
-	}
-	sprintf(buf, "unknown nfs status return value: %d", stat);
-	return buf;
-}
-
diff --git a/mdk-stage1/nfsmount.h b/mdk-stage1/nfsmount.h
deleted file mode 100644
index a27e8a8d7..000000000
--- a/mdk-stage1/nfsmount.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * Please do not edit this file.
- * It was generated using rpcgen.
- */
-
-#ifndef _NFSMOUNT_H_RPCGEN
-#define _NFSMOUNT_H_RPCGEN
-
-#include <rpc/rpc.h>
-
-int nfsmount_prepare(const char *spec, char **mount_opts);
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user or with the express written consent of
- * Sun Microsystems, Inc.
- *
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- *
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- *
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- *
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- *
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Copyright (c) 1985, 1990 by Sun Microsystems, Inc.
- */
-
-/* from @(#)mount.x	1.3 91/03/11 TIRPC 1.0 */
-#ifndef _rpcsvc_mount_h
-#define _rpcsvc_mount_h
-#include <asm/types.h>
-#define MNTPATHLEN 1024
-#define MNTNAMLEN 255
-#define FHSIZE 32
-#define FHSIZE3 64
-
-typedef char fhandle[FHSIZE];
-
-typedef struct {
-	u_int fhandle3_len;
-	char *fhandle3_val;
-} fhandle3;
-
-enum mountstat3 {
-	MNT_OK = 0,
-	MNT3ERR_PERM = 1,
-	MNT3ERR_NOENT = 2,
-	MNT3ERR_IO = 5,
-	MNT3ERR_ACCES = 13,
-	MNT3ERR_NOTDIR = 20,
-	MNT3ERR_INVAL = 22,
-	MNT3ERR_NAMETOOLONG = 63,
-	MNT3ERR_NOTSUPP = 10004,
-	MNT3ERR_SERVERFAULT = 10006,
-};
-typedef enum mountstat3 mountstat3;
-
-struct fhstatus {
-	u_int fhs_status;
-	union {
-		fhandle fhs_fhandle;
-	} fhstatus_u;
-};
-typedef struct fhstatus fhstatus;
-
-struct mountres3_ok {
-	fhandle3 fhandle;
-	struct {
-		u_int auth_flavours_len;
-		int *auth_flavours_val;
-	} auth_flavours;
-};
-typedef struct mountres3_ok mountres3_ok;
-
-struct mountres3 {
-	mountstat3 fhs_status;
-	union {
-		mountres3_ok mountinfo;
-	} mountres3_u;
-};
-typedef struct mountres3 mountres3;
-
-typedef char *dirpath;
-
-typedef char *name;
-
-typedef struct mountbody *mountlist;
-
-struct mountbody {
-	name ml_hostname;
-	dirpath ml_directory;
-	mountlist ml_next;
-};
-typedef struct mountbody mountbody;
-
-typedef struct groupnode *groups;
-
-struct groupnode {
-	name gr_name;
-	groups gr_next;
-};
-typedef struct groupnode groupnode;
-
-typedef struct exportnode *exports;
-
-struct exportnode {
-	dirpath ex_dir;
-	groups ex_groups;
-	exports ex_next;
-};
-typedef struct exportnode exportnode;
-
-struct ppathcnf {
-	int pc_link_max;
-	short pc_max_canon;
-	short pc_max_input;
-	short pc_name_max;
-	short pc_path_max;
-	short pc_pipe_buf;
-	u_char pc_vdisable;
-	char pc_xxx;
-	short pc_mask[2];
-};
-typedef struct ppathcnf ppathcnf;
-#endif /*!_rpcsvc_mount_h*/
-
-#define MOUNTPROG 100005
-#define MOUNTVERS 1
-
-#if defined(__STDC__) || defined(__cplusplus)
-#define MOUNTPROC_NULL 0
-extern  void * mountproc_null_1(void *, CLIENT *);
-extern  void * mountproc_null_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_MNT 1
-extern  fhstatus * mountproc_mnt_1(dirpath *, CLIENT *);
-extern  fhstatus * mountproc_mnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_DUMP 2
-extern  mountlist * mountproc_dump_1(void *, CLIENT *);
-extern  mountlist * mountproc_dump_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_UMNT 3
-extern  void * mountproc_umnt_1(dirpath *, CLIENT *);
-extern  void * mountproc_umnt_1_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC_UMNTALL 4
-extern  void * mountproc_umntall_1(void *, CLIENT *);
-extern  void * mountproc_umntall_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORT 5
-extern  exports * mountproc_export_1(void *, CLIENT *);
-extern  exports * mountproc_export_1_svc(void *, struct svc_req *);
-#define MOUNTPROC_EXPORTALL 6
-extern  exports * mountproc_exportall_1(void *, CLIENT *);
-extern  exports * mountproc_exportall_1_svc(void *, struct svc_req *);
-extern int mountprog_1_freeresult (SVCXPRT *, xdrproc_t, caddr_t);
-
-#else /* K&R C */
-#define MOUNTPROC_NULL 0
-extern  void * mountproc_null_1();
-extern  void * mountproc_null_1_svc();
-#define MOUNTPROC_MNT 1
-extern  fhstatus * mountproc_mnt_1();
-extern  fhstatus * mountproc_mnt_1_svc();
-#define MOUNTPROC_DUMP 2
-extern  mountlist * mountproc_dump_1();
-extern  mountlist * mountproc_dump_1_svc();
-#define MOUNTPROC_UMNT 3
-extern  void * mountproc_umnt_1();
-extern  void * mountproc_umnt_1_svc();
-#define MOUNTPROC_UMNTALL 4
-extern  void * mountproc_umntall_1();
-extern  void * mountproc_umntall_1_svc();
-#define MOUNTPROC_EXPORT 5
-extern  exports * mountproc_export_1();
-extern  exports * mountproc_export_1_svc();
-#define MOUNTPROC_EXPORTALL 6
-extern  exports * mountproc_exportall_1();
-extern  exports * mountproc_exportall_1_svc();
-extern int mountprog_1_freeresult ();
-#endif /* K&R C */
-#define MOUNTVERS_POSIX 2
-
-#if defined(__STDC__) || defined(__cplusplus)
-extern  void * mountproc_null_2(void *, CLIENT *);
-extern  void * mountproc_null_2_svc(void *, struct svc_req *);
-extern  fhstatus * mountproc_mnt_2(dirpath *, CLIENT *);
-extern  fhstatus * mountproc_mnt_2_svc(dirpath *, struct svc_req *);
-extern  mountlist * mountproc_dump_2(void *, CLIENT *);
-extern  mountlist * mountproc_dump_2_svc(void *, struct svc_req *);
-extern  void * mountproc_umnt_2(dirpath *, CLIENT *);
-extern  void * mountproc_umnt_2_svc(dirpath *, struct svc_req *);
-extern  void * mountproc_umntall_2(void *, CLIENT *);
-extern  void * mountproc_umntall_2_svc(void *, struct svc_req *);
-extern  exports * mountproc_export_2(void *, CLIENT *);
-extern  exports * mountproc_export_2_svc(void *, struct svc_req *);
-extern  exports * mountproc_exportall_2(void *, CLIENT *);
-extern  exports * mountproc_exportall_2_svc(void *, struct svc_req *);
-#define MOUNTPROC_PATHCONF 7
-extern  ppathcnf * mountproc_pathconf_2(dirpath *, CLIENT *);
-extern  ppathcnf * mountproc_pathconf_2_svc(dirpath *, struct svc_req *);
-extern int mountprog_2_freeresult (SVCXPRT *, xdrproc_t, caddr_t);
-
-#else /* K&R C */
-extern  void * mountproc_null_2();
-extern  void * mountproc_null_2_svc();
-extern  fhstatus * mountproc_mnt_2();
-extern  fhstatus * mountproc_mnt_2_svc();
-extern  mountlist * mountproc_dump_2();
-extern  mountlist * mountproc_dump_2_svc();
-extern  void * mountproc_umnt_2();
-extern  void * mountproc_umnt_2_svc();
-extern  void * mountproc_umntall_2();
-extern  void * mountproc_umntall_2_svc();
-extern  exports * mountproc_export_2();
-extern  exports * mountproc_export_2_svc();
-extern  exports * mountproc_exportall_2();
-extern  exports * mountproc_exportall_2_svc();
-#define MOUNTPROC_PATHCONF 7
-extern  ppathcnf * mountproc_pathconf_2();
-extern  ppathcnf * mountproc_pathconf_2_svc();
-extern int mountprog_2_freeresult ();
-#endif /* K&R C */
-#define MOUNT_V3 3
-
-#if defined(__STDC__) || defined(__cplusplus)
-#define MOUNTPROC3_NULL 0
-extern  void * mountproc3_null_3(void *, CLIENT *);
-extern  void * mountproc3_null_3_svc(void *, struct svc_req *);
-#define MOUNTPROC3_MNT 1
-extern  mountres3 * mountproc3_mnt_3(dirpath *, CLIENT *);
-extern  mountres3 * mountproc3_mnt_3_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC3_DUMP 2
-extern  mountlist * mountproc3_dump_3(void *, CLIENT *);
-extern  mountlist * mountproc3_dump_3_svc(void *, struct svc_req *);
-#define MOUNTPROC3_UMNT 3
-extern  void * mountproc3_umnt_3(dirpath *, CLIENT *);
-extern  void * mountproc3_umnt_3_svc(dirpath *, struct svc_req *);
-#define MOUNTPROC3_UMNTALL 4
-extern  void * mountproc3_umntall_3(void *, CLIENT *);
-extern  void * mountproc3_umntall_3_svc(void *, struct svc_req *);
-#define MOUNTPROC3_EXPORT 5
-extern  exports * mountproc3_export_3(void *, CLIENT *);
-extern  exports * mountproc3_export_3_svc(void *, struct svc_req *);
-extern int mountprog_3_freeresult (SVCXPRT *, xdrproc_t, caddr_t);
-
-#else /* K&R C */
-#define MOUNTPROC3_NULL 0
-extern  void * mountproc3_null_3();
-extern  void * mountproc3_null_3_svc();
-#define MOUNTPROC3_MNT 1
-extern  mountres3 * mountproc3_mnt_3();
-extern  mountres3 * mountproc3_mnt_3_svc();
-#define MOUNTPROC3_DUMP 2
-extern  mountlist * mountproc3_dump_3();
-extern  mountlist * mountproc3_dump_3_svc();
-#define MOUNTPROC3_UMNT 3
-extern  void * mountproc3_umnt_3();
-extern  void * mountproc3_umnt_3_svc();
-#define MOUNTPROC3_UMNTALL 4
-extern  void * mountproc3_umntall_3();
-extern  void * mountproc3_umntall_3_svc();
-#define MOUNTPROC3_EXPORT 5
-extern  exports * mountproc3_export_3();
-extern  exports * mountproc3_export_3_svc();
-extern int mountprog_3_freeresult ();
-#endif /* K&R C */
-
-/* the xdr functions */
-
-#if defined(__STDC__) || defined(__cplusplus)
-extern  bool_t xdr_fhandle (XDR *, fhandle);
-extern  bool_t xdr_fhandle3 (XDR *, fhandle3*);
-extern  bool_t xdr_mountstat3 (XDR *, mountstat3*);
-extern  bool_t xdr_fhstatus (XDR *, fhstatus*);
-extern  bool_t xdr_mountres3_ok (XDR *, mountres3_ok*);
-extern  bool_t xdr_mountres3 (XDR *, mountres3*);
-extern  bool_t xdr_dirpath (XDR *, dirpath*);
-extern  bool_t xdr_name (XDR *, name*);
-extern  bool_t xdr_mountlist (XDR *, mountlist*);
-extern  bool_t xdr_mountbody (XDR *, mountbody*);
-extern  bool_t xdr_groups (XDR *, groups*);
-extern  bool_t xdr_groupnode (XDR *, groupnode*);
-extern  bool_t xdr_exports (XDR *, exports*);
-extern  bool_t xdr_exportnode (XDR *, exportnode*);
-extern  bool_t xdr_ppathcnf (XDR *, ppathcnf*);
-
-#else /* K&R C */
-extern bool_t xdr_fhandle ();
-extern bool_t xdr_fhandle3 ();
-extern bool_t xdr_mountstat3 ();
-extern bool_t xdr_fhstatus ();
-extern bool_t xdr_mountres3_ok ();
-extern bool_t xdr_mountres3 ();
-extern bool_t xdr_dirpath ();
-extern bool_t xdr_name ();
-extern bool_t xdr_mountlist ();
-extern bool_t xdr_mountbody ();
-extern bool_t xdr_groups ();
-extern bool_t xdr_groupnode ();
-extern bool_t xdr_exports ();
-extern bool_t xdr_exportnode ();
-extern bool_t xdr_ppathcnf ();
-
-#endif /* K&R C */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* !_NFSMOUNT_H_RPCGEN */
-
diff --git a/mdk-stage1/partition.c b/mdk-stage1/partition.c
deleted file mode 100644
index 8fd581017..000000000
--- a/mdk-stage1/partition.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/mount.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <libgen.h>
-#include "stage1.h"
-#include "frontend.h"
-#include "modules.h"
-#include "probing.h"
-#include "log.h"
-#include "mount.h"
-#include "lomount.h"
-#include "automatic.h"
-
-#include "disk.h"
-#include "partition.h"
-
-struct partition_detection_anchor {
-	off_t offset;
-	const char * anchor;
-};
-
-static int seek_and_compare(int fd, struct partition_detection_anchor anch)
-{
-	char buf[500];
-	size_t count;
-	if (lseek(fd, anch.offset, SEEK_SET) == (off_t)-1) {
-		log_perror("seek failed");
-		return -1;
-	}
-	count = read(fd, buf, strlen(anch.anchor));
-	if (count != strlen(anch.anchor)) {
-		log_perror("read failed");
-		return -1;
-	}
-	buf[count] = '\0';
-	if (strcmp(anch.anchor, buf))
-		return 1;
-	return 0;
-}
-
-static const char * detect_partition_type(char * dev)
-{
-	struct partition_detection_info {
-		const char * name;
-		struct partition_detection_anchor anchor0;
-		struct partition_detection_anchor anchor1;
-		struct partition_detection_anchor anchor2;
-	};
-	struct partition_detection_info partitions_signatures[] = { 
-		{ "Linux Swap", { 4086, "SWAP-SPACE" }, { 0, NULL }, { 0, NULL } },
-		{ "Linux Swap", { 4086, "SWAPSPACE2" }, { 0, NULL }, { 0, NULL } },
-		{ "Ext2", { 0x438, "\x53\xEF" }, { 0, NULL }, { 0, NULL } },
-		{ "ReiserFS", { 0x10034, "ReIsErFs" }, { 0, NULL }, { 0, NULL } },
-		{ "ReiserFS", { 0x10034, "ReIsEr2Fs" }, { 0, NULL }, { 0, NULL } },
-		{ "XFS", { 0, "XFSB" }, { 0x200, "XAGF" }, { 0x400, "XAGI" } },
-		{ "JFS", { 0x8000, "JFS1" }, { 0, NULL }, { 0, NULL } },
-		{ "NTFS", { 0x1FE, "\x55\xAA" }, { 0x3, "NTFS" }, { 0, NULL } },
-		{ "FAT32", { 0x1FE, "\x55\xAA" }, { 0x52, "FAT32" }, { 0, NULL } },
-		{ "FAT", { 0x1FE, "\x55\xAA" }, { 0x36, "FAT" }, { 0, NULL } },
-		{ "Linux LVM", { 0, "HM\1\0" }, { 0, NULL }, { 0, NULL } }
-	};
-	int partitions_signatures_nb = sizeof(partitions_signatures) / sizeof(struct partition_detection_info);
-	int i;
-	int fd;
-        const char *part_type = NULL;
-
-	char device_fullname[50];
-	strcpy(device_fullname, "/dev/");
-	strcat(device_fullname, dev);
-
-	if (ensure_dev_exists(device_fullname))
-		return NULL;
-	log_message("guessing type of %s", device_fullname);
-
-	if ((fd = open(device_fullname, O_RDONLY, 0)) < 0) {
-		log_perror("open");
-		return NULL;
-	}
-	
-	for (i=0; i<partitions_signatures_nb; i++) {
-		int results = seek_and_compare(fd, partitions_signatures[i].anchor0);
-		if (results == -1)
-			goto detect_partition_type_end;
-		if (results == 1)
-			continue;
-		if (!partitions_signatures[i].anchor1.anchor)
-			goto detect_partition_found_it;
-
-		results = seek_and_compare(fd, partitions_signatures[i].anchor1);
-		if (results == -1)
-			goto detect_partition_type_end;
-		if (results == 1)
-			continue;
-		if (!partitions_signatures[i].anchor2.anchor)
-			goto detect_partition_found_it;
-
-		results = seek_and_compare(fd, partitions_signatures[i].anchor2);
-		if (results == -1)
-			goto detect_partition_type_end;
-		if (results == 1)
-			continue;
-
-	detect_partition_found_it:
-		part_type = partitions_signatures[i].name;
-                break;
-	}
-
- detect_partition_type_end:
-	close(fd);
-	return part_type;
-}
-
-int list_partitions(char * dev_name, char ** parts, char ** comments)
-{
-	int major, minor, blocks;
-	char name[100];
-	FILE * f;
-	int i = 0;
-	char buf[512];
-
-	if (!(f = fopen("/proc/partitions", "rb")) || !fgets(buf, sizeof(buf), f) || !fgets(buf, sizeof(buf), f)) {
-		log_perror(dev_name);
-                return 1;
-	}
-
-	while (fgets(buf, sizeof(buf), f)) {
-		memset(name, 0, sizeof(name));
-		sscanf(buf, " %d %d %d %s", &major, &minor, &blocks, name);
-		if ((strstr(name, dev_name) == name) && (blocks > 1) && (name[strlen(dev_name)] != '\0')) {
-			const char * partition_type = detect_partition_type(name);
-			parts[i] = strdup(name);
-			comments[i] = (char *) malloc(sizeof(char) * 100);
-			sprintf(comments[i], "size: %d Mbytes", blocks >> 10);
-			if (partition_type) {
-				strcat(comments[i], ", type: ");
-				strcat(comments[i], partition_type);
-			}
-			i++;
-		}
-	}
-	parts[i] = NULL;
-	fclose(f);
-
-        return 0;
-}
diff --git a/mdk-stage1/partition.h b/mdk-stage1/partition.h
deleted file mode 100644
index e901662df..000000000
--- a/mdk-stage1/partition.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Olivier Blin (oblin@mandrakesoft.com)
- *
- * Copyright 2005 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _PARTITION_H_
-#define _PARTITION_H_
-
-int list_partitions(char * dev_name, char ** parts, char ** comments);
-
-#endif
-
diff --git a/mdk-stage1/pci-resource/.cvsignore b/mdk-stage1/pci-resource/.cvsignore
deleted file mode 100644
index 4c7b0844b..000000000
--- a/mdk-stage1/pci-resource/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pci-ids.h
diff --git a/mdk-stage1/pci-resource/Makefile b/mdk-stage1/pci-resource/Makefile
deleted file mode 100644
index 955c92f5e..000000000
--- a/mdk-stage1/pci-resource/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
- #******************************************************************************
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-all: pci-ids.h
-
-pci-ids.h: /usr/share/ldetect-lst/pcitable update-pci-ids.pl
-	perl update-pci-ids.pl > $@ || { rm -f $@; exit 1; }
-
-clean:
-	rm -f pci-ids.h
diff --git a/mdk-stage1/pci-resource/update-pci-ids.pl b/mdk-stage1/pci-resource/update-pci-ids.pl
deleted file mode 100755
index 01839dcf2..000000000
--- a/mdk-stage1/pci-resource/update-pci-ids.pl
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use MDK::Common;
-
-require '/usr/bin/merge2pcitable.pl';
-my $pci = read_pcitable("/usr/share/ldetect-lst/pcitable");
-
-print '
-#define PCI_REVISION_ID         0x08    /* Revision ID */
-
-struct pci_module_map {
-	unsigned short	vendor;     /* PCI vendor id */
-	unsigned short	device;     /* PCI device id */
-	const char      *name;      /* PCI human readable name */
-	const char      *module;    /* module to load */
-};
-
-struct pci_module_map_full {
-	unsigned short	vendor;     /* PCI vendor id */
-	unsigned short	device;     /* PCI device id */
-	unsigned short	subvendor;  /* PCI subvendor id */
-	unsigned short	subdevice;  /* PCI subdevice id */
-	const char      *name;      /* PCI human readable name */
-	const char      *module;    /* module to load */
-};
-
-';
-
-my %t = ( 
-    network => 'network/main|gigabit|tokenring|wireless',
-    medias  => 'disk/scsi|hardware_raid|sata',
-);
-
-foreach my $type (keys %t) {
-    my @modules = chomp_(`perl ../../kernel/modules.pl pci_modules4stage1 "$t{$type}"`);
-
-    my (@entries, @entries_full);
-
-    foreach my $k (sort keys %$pci) {
-	my $v = $pci->{$k};
-	member($v->[0], @modules) or next;
-	$k =~ /^(....)(....)(....)(....)/;
-	my $values = { vendor => $1, device => $2, subvendor => $3, subdevice => $4, driver => $v->[0], description => $v->[1] };
-	if ($values->{subdevice} eq 'ffff' && $values->{subvendor} eq 'ffff') {
-	    push @entries, $values;
-	} else {
-	    push @entries_full, $values;
-	}
-    }
-
-    print "#ifndef DISABLE_".uc($type)."
-struct pci_module_map ${type}_pci_ids[] = {
-";
-    printf qq|\t{ 0x%s, 0x%s, "%s", "%s" },\n|, $_->{vendor}, $_->{device}, $_->{description}, $_->{driver}
-      foreach @entries;
-    print "};
-unsigned int ${type}_num_ids = sizeof(${type}_pci_ids) / sizeof(struct pci_module_map);
-";
-
-    print "
-struct pci_module_map_full ${type}_pci_ids_full[] = {
-";
-    printf qq|\t{ 0x%s, 0x%s, 0x%s, 0x%s, "%s", "%s" },\n|, $_->{vendor}, $_->{device}, $_->{subvendor}, $_->{subdevice}, $_->{description}, $_->{driver}
-      foreach @entries_full;
-    print "};
-unsigned int ${type}_num_ids_full = sizeof(${type}_pci_ids_full) / sizeof(struct pci_module_map_full);
-
-#endif
-
-";
-}
diff --git a/mdk-stage1/pcmcia_/Makefile b/mdk-stage1/pcmcia_/Makefile
deleted file mode 100644
index 9cecc8784..000000000
--- a/mdk-stage1/pcmcia_/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2001 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-all: libpcmcia.a
-
-clean:
-	rm -f *.o libpcmcia.a
-
-FLAGS = -D__linux__ -Wall -Werror -Wno-deprecated-declarations -Os -fomit-frame-pointer -pipe -c -I.. -D_BSD_SOURCE
-
-
-OBJS = probe.o cardmgr.o lex_config.o yacc_config.o
-
-
-libpcmcia.a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-$(OBJS): %.o: %.c
-	$(DIET) gcc $(FLAGS) $(INCLUDES) -c $< -o $@
diff --git a/mdk-stage1/pcmcia_/bulkmem.h b/mdk-stage1/pcmcia_/bulkmem.h
deleted file mode 100644
index 7748d4432..000000000
--- a/mdk-stage1/pcmcia_/bulkmem.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Definitions for bulk memory services
- *
- * bulkmem.h 1.13 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- * bulkmem.h 1.3 1995/05/27 04:49:49
- */
-
-#ifndef _LINUX_BULKMEM_H
-#define _LINUX_BULKMEM_H
-
-/* For GetFirstRegion and GetNextRegion */
-typedef struct region_info_t {
-    u_int		Attributes;
-    u_int		CardOffset;
-    u_int		RegionSize;
-    u_int		AccessSpeed;
-    u_int		BlockSize;
-    u_int		PartMultiple;
-    u_char		JedecMfr, JedecInfo;
-    memory_handle_t	next;
-} region_info_t;
-
-#define REGION_TYPE		0x0001
-#define REGION_TYPE_CM		0x0000
-#define REGION_TYPE_AM		0x0001
-#define REGION_PREFETCH		0x0008
-#define REGION_CACHEABLE	0x0010
-#define REGION_BAR_MASK		0xe000
-#define REGION_BAR_SHIFT	13
-
-/* For OpenMemory */
-typedef struct open_mem_t {
-    u_int		Attributes;
-    u_int		Offset;
-} open_mem_t;
-
-/* Attributes for OpenMemory */
-#define MEMORY_TYPE		0x0001
-#define MEMORY_TYPE_CM		0x0000
-#define MEMORY_TYPE_AM		0x0001
-#define MEMORY_EXCLUSIVE	0x0002
-#define MEMORY_PREFETCH		0x0008
-#define MEMORY_CACHEABLE	0x0010
-#define MEMORY_BAR_MASK		0xe000
-#define MEMORY_BAR_SHIFT	13
-
-typedef struct eraseq_entry_t {
-    memory_handle_t	Handle;
-    u_char		State;
-    u_int		Size;
-    u_int		Offset;
-    void		*Optional;
-} eraseq_entry_t;
-
-typedef struct eraseq_hdr_t {
-    int			QueueEntryCnt;
-    eraseq_entry_t	*QueueEntryArray;
-} eraseq_hdr_t;
-
-#define ERASE_QUEUED		0x00
-#define ERASE_IN_PROGRESS(n)	(((n) > 0) && ((n) < 0x80))
-#define ERASE_IDLE		0xff
-#define ERASE_PASSED		0xe0
-#define ERASE_FAILED		0xe1
-
-#define ERASE_MISSING		0x80
-#define ERASE_MEDIA_WRPROT	0x84
-#define ERASE_NOT_ERASABLE	0x85
-#define ERASE_BAD_OFFSET	0xc1
-#define ERASE_BAD_TECH		0xc2
-#define ERASE_BAD_SOCKET	0xc3
-#define ERASE_BAD_VCC		0xc4
-#define ERASE_BAD_VPP		0xc5
-#define ERASE_BAD_SIZE		0xc6
-
-/* For CopyMemory */
-typedef struct copy_op_t {
-    u_int		Attributes;
-    u_int		SourceOffset;
-    u_int		DestOffset;
-    u_int		Count;
-} copy_op_t;
-
-/* For ReadMemory and WriteMemory */
-typedef struct mem_op_t {
-    u_int	Attributes;
-    u_int	Offset;
-    u_int	Count;
-} mem_op_t;
-
-#define MEM_OP_BUFFER		0x01
-#define MEM_OP_BUFFER_USER	0x00
-#define MEM_OP_BUFFER_KERNEL	0x01
-#define MEM_OP_DISABLE_ERASE	0x02
-#define MEM_OP_VERIFY		0x04
-
-/* For RegisterMTD */
-typedef struct mtd_reg_t {
-    u_int	Attributes;
-    u_int	Offset;
-    u_long	MediaID;
-} mtd_reg_t;
-
-/*
- *  Definitions for MTD requests
- */
-
-typedef struct mtd_request_t {
-    u_int	SrcCardOffset;
-    u_int	DestCardOffset;
-    u_int	TransferLength;
-    u_int	Function;
-    u_long	MediaID;
-    u_int	Status;
-    u_int	Timeout;
-} mtd_request_t;
-
-/* Fields in MTD Function */
-#define MTD_REQ_ACTION		0x003
-#define MTD_REQ_ERASE		0x000
-#define MTD_REQ_READ		0x001
-#define MTD_REQ_WRITE		0x002
-#define MTD_REQ_COPY		0x003
-#define MTD_REQ_NOERASE		0x004
-#define MTD_REQ_VERIFY		0x008
-#define MTD_REQ_READY		0x010
-#define MTD_REQ_TIMEOUT		0x020
-#define MTD_REQ_LAST		0x040
-#define MTD_REQ_FIRST		0x080
-#define MTD_REQ_KERNEL		0x100
-
-/* Status codes */
-#define MTD_WAITREQ	0x00
-#define MTD_WAITTIMER	0x01
-#define MTD_WAITRDY	0x02
-#define MTD_WAITPOWER	0x03
-
-/*
- *  Definitions for MTD helper functions
- */
-
-/* For MTDModifyWindow */
-typedef struct mtd_mod_win_t {
-    u_int	Attributes;
-    u_int	AccessSpeed;
-    u_int	CardOffset;
-} mtd_mod_win_t;
-
-/* For MTDSetVpp */
-typedef struct mtd_vpp_req_t {
-    u_char	Vpp1, Vpp2;
-} mtd_vpp_req_t;
-
-/* For MTDRDYMask */
-typedef struct mtd_rdy_req_t {
-    u_int	Mask;
-} mtd_rdy_req_t;
-
-enum mtd_helper {
-    MTDRequestWindow, MTDModifyWindow, MTDReleaseWindow,
-    MTDSetVpp, MTDRDYMask
-};
-
-#ifdef IN_CARD_SERVICES
-extern int MTDHelperEntry(int func, void *a1, void *a2);
-#else
-extern int MTDHelperEntry(int func, ...);
-#endif
-
-#endif /* _LINUX_BULKMEM_H */
diff --git a/mdk-stage1/pcmcia_/cardmgr.c b/mdk-stage1/pcmcia_/cardmgr.c
deleted file mode 100644
index f67b02f72..000000000
--- a/mdk-stage1/pcmcia_/cardmgr.c
+++ /dev/null
@@ -1,1652 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Code comes from /anonymous@projects.sourceforge.net:/pub/pcmcia-cs/pcmcia-cs-3.1.29.tar.bz2
- *
- *   Licence of this code follows:
- *
- */
-/*======================================================================
-
-    PCMCIA Card Manager daemon
-
-    cardmgr.c 1.161 2001/08/24 12:19:19
-
-    The contents of this file are subject to the Mozilla Public
-    License Version 1.1 (the "License"); you may not use this file
-    except in compliance with the License. You may obtain a copy of
-    the License at http://www.mozilla.org/MPL/
-
-    Software distributed under the License is distributed on an "AS
-    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-    implied. See the License for the specific language governing
-    rights and limitations under the License.
-
-    The initial developer of the original code is David A. Hinds
-    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
-
-    Alternatively, the contents of this file may be used under the
-    terms of the GNU General Public License version 2 (the "GPL"), in
-    which case the provisions of the GPL are applicable instead of the
-    above.  If you wish to allow the use of your version of this file
-    only under the terms of the GPL and not to allow others to use
-    your version of this file under the MPL, indicate your decision
-    by deleting the provisions above and replace them with the notice
-    and other provisions required by the GPL.  If you do not delete
-    the provisions above, a recipient may use your version of this
-    file under either the MPL or the GPL.
-    
-======================================================================*/
-
-#ifndef __linux__
-#include <pcmcia/u_compat.h>
-#endif
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <errno.h>
-//mdk-stage1// #include <syslog.h>
-//mdk-stage1// #include <getopt.h>
-#include <signal.h>
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/wait.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/file.h>
-
-#include <pcmcia_/version.h>
-//mdk-stage1// #include <pcmcia/config.h>
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-#include <pcmcia_/cistpl.h>
-#include <pcmcia_/ds.h>
-
-#include "cardmgr.h"
-
-#include "../log.h"
-#include "modules.h"
-#include "pcmcia.h"
-
-/*====================================================================*/
-
-typedef struct socket_info_t {
-    int			fd;
-    int			state;
-    card_info_t		*card;
-    bind_info_t		*bind[MAX_BINDINGS];
-    mtd_ident_t		*mtd[2*CISTPL_MAX_DEVICES];
-} socket_info_t;
-
-#define SOCKET_PRESENT	0x01
-#define SOCKET_READY	0x02
-#define SOCKET_HOTPLUG	0x04
-
-/* Linked list of resource adjustments */
-struct adjust_list_t *root_adjust = NULL;
-
-/* Linked list of device definitions */
-struct device_info_t *root_device = NULL;
-
-/* Special pointer to "anonymous" card definition */
-struct card_info_t *blank_card = NULL;
-
-/* Linked list of card definitions */
-struct card_info_t *root_card = NULL;
-
-/* Linked list of function definitions */
-struct card_info_t *root_func = NULL;
-
-/* Linked list of MTD definitions */
-struct mtd_ident_t *root_mtd = NULL;
-
-/* Default MTD */
-struct mtd_ident_t *default_mtd = NULL;
-
-static int sockets;
-static struct socket_info_t socket[MAX_SOCKS];
-
-/* Default path for config file, device scripts */
-#ifdef ETC
-static char *configpath = ETC;
-#else
-static char *configpath = "/etc/pcmcia";
-#endif
-
-/* Default path for pid file */
-//mdk-stage1// static char *pidfile = "/var/run/cardmgr.pid";
-
-#ifdef __linux__
-/* Default path for finding modules */
-//mdk-stage1// static char *modpath = NULL;
-#endif
-
-/* Default path for socket info table */
-static char *stabfile;
-
-/* If set, don't generate beeps when cards are inserted */
-//mdk-stage1// static int be_quiet = 0;
-
-/* If set, use modprobe instead of insmod */
-//mdk-stage1// static int do_modprobe = 0;
-
-/* If set, configure already inserted cards, then exit */
-//mdk-stage1// static int one_pass = 0;
-
-/* Extra message logging? */
-//mdk-stage1// static int verbose = 0;
-
-/*====================================================================*/
-
-#ifdef __linux__
-
-static int major = 0;
-
-static int lookup_dev(char *name)
-{
-    FILE *f;
-    int n;
-    char s[32], t[32];
-    
-    f = fopen("/proc/devices", "r");
-    if (f == NULL)
-	return -errno;
-    while (fgets(s, 32, f) != NULL) {
-	if (sscanf(s, "%d %s", &n, t) == 2)
-	    if (strcmp(name, t) == 0)
-		break;
-    }
-    fclose(f);
-    if (strcmp(name, t) == 0)
-	return n;
-    else
-	return -ENODEV;
-}
-
-int open_dev(dev_t dev, int mode)
-{
-    char * fn = "/tmp/cardmgr_tmp";
-    int fd;
-
-    unlink(fn);
-	if (mknod(fn, mode, dev) != 0)
-		return -1;
-    fd = open(fn, (mode&S_IWRITE)?O_RDWR:O_RDONLY);
-    if (fd < 0)
-	fd = open(fn, O_NONBLOCK|((mode&S_IWRITE)?O_RDWR:O_RDONLY));
-    unlink(fn);
-    return fd;
-}
-
-#endif /* __linux__ */
-
-int open_sock(int sock, int mode)
-{
-#ifdef __linux__
-    dev_t dev = (major<<8)+sock;
-    return open_dev(dev, mode);
-#endif
-#ifdef __BEOS__
-    int fd;
-    char fn[B_OS_NAME_LENGTH];
-    sprintf(fn, "/dev/pcmcia/sock%d", sock);
-    return open(fn, (mode & S_IWRITE) ? O_RDWR: O_RDONLY);
-#endif
-}
-
-/*======================================================================
-
-    xlate_scsi_name() is a sort-of-hack used to deduce the minor
-    device numbers of SCSI devices, from the information available to
-    the low-level driver.
-    
-======================================================================*/
-
-#ifdef __linux__
-
-#include <linux/major.h>
-#include <scsi/scsi.h>
-//mdk-stage1// #define VERSION(v,p,s) (((v)<<16)+(p<<8)+s)
-//mdk-stage1// #if (LINUX_VERSION_CODE < VERSION(2,1,126))
-//mdk-stage1// #define SCSI_DISK0_MAJOR SCSI_DISK_MAJOR
-//mdk-stage1// #endif
-
-static int xlate_scsi_name(bind_info_t *bind)
-{
-    int i, fd, mode, minor;
-    u_int arg[2], id1, id2;
-
-    id1 = strtol(bind->name+3, NULL, 16);
-    if ((bind->major == SCSI_DISK0_MAJOR) ||
-	(bind->major == SCSI_CDROM_MAJOR))
-	mode = S_IREAD|S_IFBLK;
-    else
-	mode = S_IREAD|S_IFCHR;
-    
-    for (i = 0; i < 16; i++) {
-	minor = (bind->major == SCSI_DISK0_MAJOR) ? (i<<4) : i;
-	fd = open_dev((bind->major<<8)+minor, mode);
-	if (fd < 0)
-	    continue;
-	if (ioctl(fd, SCSI_IOCTL_GET_IDLUN, arg) == 0) {
-	    id2 = (arg[0]&0x0f) + ((arg[0]>>4)&0xf0) +
-		((arg[0]>>8)&0xf00) + ((arg[0]>>12)&0xf000);
-	    if (id1 == id2) {
-		close(fd);
-		switch (bind->major) {
-		case SCSI_DISK0_MAJOR:
-		case SCSI_GENERIC_MAJOR:
-		    sprintf(bind->name+2, "%c", 'a'+i); break;
-		case SCSI_CDROM_MAJOR:
-		    sprintf(bind->name, "scd%d", i); break;
-		case SCSI_TAPE_MAJOR:
-		    sprintf(bind->name+2, "%d", i); break;
-		}
-		bind->minor = minor;
-		return 0;
-	    }
-	}
-	close(fd);
-    }
-    return -1;
-}
-#endif
-
-/*====================================================================*/
-
-#define BEEP_TIME 150
-#define BEEP_OK   1000
-#define BEEP_WARN 2000
-#define BEEP_ERR  4000
-
-#ifdef __linux__
-
-//mdk-stage1// #include <sys/kd.h>
-//mdk-stage1// 
-static void beep(unsigned int ms, unsigned int freq)
-{
-//mdk-stage1//     int fd, arg;
-//mdk-stage1// 
-//mdk-stage1//     if (be_quiet)
-//mdk-stage1// 	return;
-//mdk-stage1//     fd = open("/dev/console", O_RDWR);
-//mdk-stage1//     if (fd < 0)
-//mdk-stage1// 	return;
-//mdk-stage1//     arg = (ms << 16) | freq;
-//mdk-stage1//     ioctl(fd, KDMKTONE, arg);
-//mdk-stage1//     close(fd);
-//mdk-stage1//     usleep(ms*1000);
-}
-
-#endif /* __linux__ */
-
-#ifdef __BEOS__
-static void beep(unsigned int ms, unsigned int freq)
-{
-    if (!be_quiet) system("/bin/beep");
-}
-#endif
-
-/*====================================================================*/
-
-//mdk-stage1// static void write_pid(void)
-//mdk-stage1// {
-//mdk-stage1//     FILE *f;
-//mdk-stage1//     f = fopen(pidfile, "w");
-//mdk-stage1//     if (f == NULL)
-//mdk-stage1// 	syslog(LOG_WARNING, "could not open %s: %m", pidfile);
-//mdk-stage1//     else {
-//mdk-stage1// 	fprintf(f, "%d\n", getpid());
-//mdk-stage1// 	fclose(f);
-//mdk-stage1//     }
-//mdk-stage1// }
-
-static void write_stab(void)
-{
-    int i, j, k;
-    FILE *f;
-    socket_info_t *s;
-    bind_info_t *bind;
-
-    f = fopen(stabfile, "w");
-    if (f == NULL) {
-	log_message("CM: fopen(stabfile) failed: %m");
-	return;
-    }
-#ifndef __BEOS__
-    if (flock(fileno(f), LOCK_EX) != 0) {
-	log_message("CM: flock(stabfile) failed: %m");
-	return;
-    }
-#endif
-    for (i = 0; i < sockets; i++) {
-	s = &socket[i];
-	fprintf(f, "Socket %d: ", i);
-	if (!(s->state & SOCKET_PRESENT)) {
-	    fprintf(f, "empty\n");
-//mdk-stage1// 	} else if (s->state & SOCKET_HOTPLUG) {
-//mdk-stage1// 	    fprintf(f, "CardBus hotplug device\n");
-	} else if (!s->card) {
-	    fprintf(f, "unsupported card\n");
-	} else {
-	    fprintf(f, "%s\n", s->card->name);
-	    for (j = 0; j < s->card->bindings; j++)
-		for (k = 0, bind = s->bind[j];
-		     bind != NULL;
-		     k++, bind = bind->next) {
-		    char *class = s->card->device[j]->class;
-		    fprintf(f, "%d\t%s\t%s\t%d\t%s",
-			    i, (class ? class : "none"),
-			    bind->dev_info, k, bind->name);
-		    if (bind->major)
-			fprintf(f, "\t%d\t%d\n",
-				bind->major, bind->minor);
-		    else
-			fputc('\n', f);
-		}
-	}
-    }
-    fflush(f);
-#ifndef __BEOS__
-    flock(fileno(f), LOCK_UN);
-#endif
-    fclose(f);
-}
-
-/*====================================================================*/
-
-static int get_tuple(int ns, cisdata_t code, ds_ioctl_arg_t *arg)
-{
-    socket_info_t *s = &socket[ns];
-    
-    arg->tuple.DesiredTuple = code;
-    arg->tuple.Attributes = 0;
-    if (ioctl(s->fd, DS_GET_FIRST_TUPLE, arg) != 0)
-	return -1;
-    arg->tuple.TupleOffset = 0;
-    if (ioctl(s->fd, DS_GET_TUPLE_DATA, arg) != 0) {
-	log_message("CM: error reading CIS data on socket %d: %m", ns);
-	return -1;
-    }
-    if (ioctl(s->fd, DS_PARSE_TUPLE, arg) != 0) {
-	log_message("CM: error parsing CIS on socket %d: %m", ns);
-	return -1;
-    }
-    return 0;
-}
-
-/*======================================================================
-
-    Code to fetch a 2.4 kernel's hot plug PCI driver list
-
-    This is distasteful but is the best I could come up with.
-
-======================================================================*/
-
-#ifdef __linux__
-
-typedef struct pci_id {
-    u_short vendor, device;
-    struct pci_id *next;
-} pci_id_t;
-
-static int get_pci_id(int ns, pci_id_t *id)
-{
-    socket_info_t *s = &socket[ns];
-    config_info_t config;
-
-    config.Function = config.ConfigBase = 0;
-    if ((ioctl(s->fd, DS_GET_CONFIGURATION_INFO, &config) != 0) ||
-	(config.IntType != INT_CARDBUS) || !config.ConfigBase)
-	return 0;
-    id->vendor = config.ConfigBase & 0xffff;
-    id->device = config.ConfigBase >> 16;
-    return 1;
-}
-
-#endif /* __linux__ */
-
-/*====================================================================*/
-
-//mdk-stage1// static void log_card_info(cistpl_vers_1_t *vers,
-//mdk-stage1// 			  cistpl_manfid_t *manfid,
-//mdk-stage1// 			  cistpl_funcid_t *funcid,
-//mdk-stage1// 			  pci_id_t *pci_id)
-//mdk-stage1// {
-//mdk-stage1//     char v[256] = "";
-//mdk-stage1//     int i;
-//mdk-stage1//     static char *fn[] = {
-//mdk-stage1// 	"multi", "memory", "serial", "parallel", "fixed disk",
-//mdk-stage1// 	"video", "network", "AIMS", "SCSI"
-//mdk-stage1//     };
-//mdk-stage1//     
-//mdk-stage1//     if (vers) {
-//mdk-stage1// 	for (i = 0; i < vers->ns; i++)
-//mdk-stage1// 	    sprintf(v+strlen(v), "%s\"%s\"",
-//mdk-stage1// 		    (i>0) ? ", " : "", vers->str+vers->ofs[i]);
-//mdk-stage1// 	syslog(LOG_INFO, "  product info: %s", v);
-//mdk-stage1//     } else {
-//mdk-stage1// 	syslog(LOG_INFO, "  no product info available");
-//mdk-stage1//     }
-//mdk-stage1//     *v = '\0';
-//mdk-stage1//     if (manfid->manf != 0)
-//mdk-stage1// 	sprintf(v, "  manfid: 0x%04x, 0x%04x",
-//mdk-stage1// 		manfid->manf, manfid->card);
-//mdk-stage1//     if (funcid->func != 0xff)
-//mdk-stage1// 	sprintf(v+strlen(v), "  function: %d (%s)", funcid->func,
-//mdk-stage1// 		fn[funcid->func]);
-//mdk-stage1//     if (strlen(v) > 0) syslog(LOG_INFO, "%s", v);
-//mdk-stage1//     if (pci_id->vendor != 0)
-//mdk-stage1// 	syslog(LOG_INFO, "  PCI id: 0x%04x, 0x%04x",
-//mdk-stage1// 	       pci_id->vendor, pci_id->device);
-//mdk-stage1// }
-
-static card_info_t *lookup_card(int ns)
-{
-    socket_info_t *s = &socket[ns];
-    card_info_t *card = NULL;
-    ds_ioctl_arg_t arg;
-    cistpl_vers_1_t *vers = NULL;
-    cistpl_manfid_t manfid = { 0, 0 };
-    pci_id_t pci_id = { 0, 0 };
-    cistpl_funcid_t funcid = { 0xff, 0xff };
-    cs_status_t status;
-    int i, ret, has_cis = 0;
-
-    /* Do we have a CIS structure? */
-    ret = ioctl(s->fd, DS_VALIDATE_CIS, &arg);
-    has_cis = ((ret == 0) && (arg.cisinfo.Chains > 0));
-    
-    /* Try to read VERS_1, MANFID tuples */
-    if (has_cis) {
-	/* rule of thumb: cards with no FUNCID, but with common memory
-	   device geometry information, are probably memory cards */
-	if (get_tuple(ns, CISTPL_FUNCID, &arg) == 0)
-	    memcpy(&funcid, &arg.tuple_parse.parse.funcid,
-		   sizeof(funcid));
-	else if (get_tuple(ns, CISTPL_DEVICE_GEO, &arg) == 0)
-	    funcid.func = CISTPL_FUNCID_MEMORY;
-	if (get_tuple(ns, CISTPL_MANFID, &arg) == 0)
-	    memcpy(&manfid, &arg.tuple_parse.parse.manfid,
-		   sizeof(manfid));
-	if (get_tuple(ns, CISTPL_VERS_1, &arg) == 0)
-	    vers = &arg.tuple_parse.parse.version_1;
-
-	for (card = root_card; card; card = card->next) {
-
-	    if (card->ident_type &
-		~(VERS_1_IDENT|MANFID_IDENT|TUPLE_IDENT))
-		continue;
-
-	    if (card->ident_type & VERS_1_IDENT) {
-		if (vers == NULL)
-		    continue;
-		for (i = 0; i < card->id.vers.ns; i++) {
-		    if (strcmp(card->id.vers.pi[i], "*") == 0)
-			continue;
-		    if (i >= vers->ns)
-			break;
-		    if (strcmp(card->id.vers.pi[i],
-			       vers->str+vers->ofs[i]) != 0)
-			break;
-		}
-		if (i < card->id.vers.ns)
-		    continue;
-	    }
-	    
-	    if (card->ident_type & MANFID_IDENT) {
-		if ((manfid.manf != card->manfid.manf) ||
-		    (manfid.card != card->manfid.card))
-		    continue;
-	    }
-		
-	    if (card->ident_type & TUPLE_IDENT) {
-		arg.tuple.DesiredTuple = card->id.tuple.code;
-		arg.tuple.Attributes = 0;
-		ret = ioctl(s->fd, DS_GET_FIRST_TUPLE, &arg);
-		if (ret != 0) continue;
-		arg.tuple.TupleOffset = card->id.tuple.ofs;
-		ret = ioctl(s->fd, DS_GET_TUPLE_DATA, &arg);
-		if (ret != 0) continue;
-		if (strncmp((char *)arg.tuple_parse.data,
-			    card->id.tuple.info,
-			    strlen(card->id.tuple.info)) != 0)
-		    continue;
-	    }
-
-	    break; /* we have a match */
-	}
-    }
-
-    /* Check PCI vendor/device info */
-    status.Function = 0;
-    ioctl(s->fd, DS_GET_STATUS, &status);
-    if (status.CardState & CS_EVENT_CB_DETECT) {
-	if (get_pci_id(ns, &pci_id)) {
-	    if (!card) {
-		for (card = root_card; card; card = card->next)
-		    if ((card->ident_type == PCI_IDENT) &&
-			(pci_id.vendor == card->manfid.manf) &&
-			(pci_id.device == card->manfid.card))
-			break;
-	    }
-	} else {
-	    /* this is a 2.4 kernel; hotplug handles these cards */
-//mdk-stage1//	    s->state |= SOCKET_HOTPLUG;
-	    log_message("CM: socket %d: CardBus hotplug device", ns);
-	    //beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1//	    return NULL;
-	}
-    }
-
-    /* Try for a FUNCID match */
-    if (!card && (funcid.func != 0xff)) {
-	for (card = root_func; card; card = card->next)
-	    if (card->id.func.funcid == funcid.func)
-		break;
-    }
-
-    if (card) {
-	log_message("CM: socket %d: %s", ns, card->name);
- 	beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1// 	if (verbose) log_card_info(vers, &manfid, &funcid, &pci_id);
-	return card;
-    }
-
-    if (!blank_card || (status.CardState & CS_EVENT_CB_DETECT) ||
-	manfid.manf || manfid.card || pci_id.vendor || vers) {
-	log_message("CM: unsupported card in socket %d", ns);
-//mdk-stage1// 	if (one_pass) return NULL;
-	beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// 	log_card_info(vers, &manfid, &funcid, &pci_id);
-	return NULL;
-    } else {
-	card = blank_card;
-	log_message("CM: socket %d: %s", ns, card->name);
- 	beep(BEEP_TIME, BEEP_WARN);
-	return card;
-    }
-}
-
-/*====================================================================*/
-
-static int load_config(void)
-{
-    if (chdir(configpath) != 0) {
-	    log_message("CM: chdir to %s failed: %m", configpath);
-	    return -1;
-    }
-    if (parse_configfile("config") != 0) {
-	    log_message("CM: parsing of config file failed: %m");
-	    return -1;
-    }
-    if (root_device == NULL)
-		log_message("CM: no device drivers defined");
-    if ((root_card == NULL) && (root_func == NULL))
-		log_message("CM: no cards defined");
-    return 0;
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void free_card(card_info_t *card)
-//mdk-stage1// {
-//mdk-stage1//     if (card && (--card->refs == 0)) {
-//mdk-stage1// 	int i;
-//mdk-stage1// 	free(card->name);
-//mdk-stage1// 	switch(card->ident_type) {
-//mdk-stage1// 	case VERS_1_IDENT:
-//mdk-stage1// 	    for (i = 0; i < card->id.vers.ns; i++)
-//mdk-stage1// 		free(card->id.vers.pi[i]);
-//mdk-stage1// 	break;
-//mdk-stage1// 	case TUPLE_IDENT:
-//mdk-stage1// 	    free(card->id.tuple.info);
-//mdk-stage1// 	    break;
-//mdk-stage1// 	default:
-//mdk-stage1// 	    break;
-//mdk-stage1// 	}
-//mdk-stage1// 	free(card);
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static void free_device(device_info_t *dev)
-//mdk-stage1// {
-//mdk-stage1//     if (dev && (--dev->refs == 0)) {
-//mdk-stage1// 	int i;
-//mdk-stage1// 	for (i = 0; i < dev->modules; i++) {
-//mdk-stage1// 	    free(dev->module[i]);
-//mdk-stage1// 	    if (dev->opts[i]) free(dev->opts[i]);
-//mdk-stage1// 	}
-//mdk-stage1// 	if (dev->class) free(dev->class);
-//mdk-stage1// 	free(dev);
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static void free_mtd(mtd_ident_t *mtd)
-//mdk-stage1// {
-//mdk-stage1//     if (mtd && (--mtd->refs == 0)) {
-//mdk-stage1// 	free(mtd->name);
-//mdk-stage1// 	free(mtd->module);
-//mdk-stage1// 	free(mtd);
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static void free_config(void)
-//mdk-stage1// {
-//mdk-stage1//     while (root_adjust != NULL) {
-//mdk-stage1// 	adjust_list_t *adj = root_adjust;
-//mdk-stage1// 	root_adjust = root_adjust->next;
-//mdk-stage1// 	free(adj);
-//mdk-stage1//     }
-//mdk-stage1//     
-//mdk-stage1//     while (root_device != NULL) {
-//mdk-stage1// 	device_info_t *dev = root_device;
-//mdk-stage1// 	root_device = root_device->next;
-//mdk-stage1// 	free_device(dev);
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1//     while (root_card != NULL) {
-//mdk-stage1// 	card_info_t *card = root_card;
-//mdk-stage1// 	root_card = root_card->next;
-//mdk-stage1// 	free_card(card);
-//mdk-stage1//     }
-//mdk-stage1//     
-//mdk-stage1//     while (root_func != NULL) {
-//mdk-stage1// 	card_info_t *card = root_func;
-//mdk-stage1// 	root_func = root_func->next;
-//mdk-stage1// 	free_card(card);
-//mdk-stage1//     }
-//mdk-stage1//     blank_card = NULL;
-//mdk-stage1//     
-//mdk-stage1//     while (root_mtd != NULL) {
-//mdk-stage1// 	mtd_ident_t *mtd = root_mtd;
-//mdk-stage1// 	root_mtd = root_mtd->next;
-//mdk-stage1// 	free_mtd(mtd);
-//mdk-stage1//     }
-//mdk-stage1//     default_mtd = NULL;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static int execute(char *msg, char *cmd)
-//mdk-stage1// {
-//mdk-stage1//     int ret;
-//mdk-stage1//     FILE *f;
-//mdk-stage1//     char line[256];
-//mdk-stage1// 
-//mdk-stage1//     syslog(LOG_INFO, "executing: '%s'", cmd);
-//mdk-stage1//     strcat(cmd, " 2>&1");
-//mdk-stage1//     f = popen(cmd, "r");
-//mdk-stage1//     while (fgets(line, 255, f)) {
-//mdk-stage1// 	line[strlen(line)-1] = '\0';
-//mdk-stage1// 	syslog(LOG_INFO, "+ %s", line);
-//mdk-stage1//     }
-//mdk-stage1//     ret = pclose(f);
-//mdk-stage1//     if (WIFEXITED(ret)) {
-//mdk-stage1// 	if (WEXITSTATUS(ret))
-//mdk-stage1// 	    syslog(LOG_INFO, "%s exited with status %d",
-//mdk-stage1// 		   msg, WEXITSTATUS(ret));
-//mdk-stage1// 	return WEXITSTATUS(ret);
-//mdk-stage1//     } else
-//mdk-stage1// 	syslog(LOG_INFO, "%s exited on signal %d",
-//mdk-stage1// 	       msg, WTERMSIG(ret));
-//mdk-stage1//     return -1;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static int execute_on_dev(char *action, char *class, char *dev)
-//mdk-stage1// {
-//mdk-stage1//     /* Fixed length strings are ok here */
-//mdk-stage1//     char msg[128], cmd[128];
-//mdk-stage1// 
-//mdk-stage1//     sprintf(msg, "%s cmd", action);
-//mdk-stage1//     sprintf(cmd, "./%s %s %s", class, action, dev);
-//mdk-stage1//     return execute(msg, cmd);
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static int execute_on_all(char *cmd, char *class, int sn, int fn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     bind_info_t *bind;
-//mdk-stage1//     int ret = 0;
-//mdk-stage1//     for (bind = s->bind[fn]; bind != NULL; bind = bind->next)
-//mdk-stage1// 	if (bind->name[0] && (bind->name[2] != '#'))
-//mdk-stage1// 	    ret |= execute_on_dev(cmd, class, bind->name);
-//mdk-stage1//     return ret;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1// 
-//mdk-stage1// typedef struct module_list_t {
-//mdk-stage1//     char *mod;
-//mdk-stage1//     int usage;
-//mdk-stage1//     struct module_list_t *next;
-//mdk-stage1// } module_list_t;
-//mdk-stage1// 
-//mdk-stage1// static module_list_t *module_list = NULL;
-//mdk-stage1// 
-//mdk-stage1// static int try_insmod(char *mod, char *opts)
-//mdk-stage1// {
-//mdk-stage1//     char *cmd = malloc(strlen(mod) + strlen(modpath) +
-//mdk-stage1// 		       (opts ? strlen(opts) : 0) + 30);
-//mdk-stage1//     int ret;
-//mdk-stage1// 
-//mdk-stage1//     strcpy(cmd, "insmod ");
-//mdk-stage1//     if (strchr(mod, '/') != NULL)
-//mdk-stage1// 	sprintf(cmd+7, "%s/%s.o", modpath, mod);
-//mdk-stage1//     else
-//mdk-stage1// 	sprintf(cmd+7, "%s/pcmcia/%s.o", modpath, mod);
-//mdk-stage1//     if (access(cmd+7, R_OK) != 0) {
-//mdk-stage1// 	syslog(LOG_INFO, "module %s not available", cmd+7);
-//mdk-stage1// 	free(cmd);
-//mdk-stage1// 	return -1;
-//mdk-stage1//     }
-//mdk-stage1//     if (opts) {
-//mdk-stage1// 	strcat(cmd, " ");
-//mdk-stage1// 	strcat(cmd, opts);
-//mdk-stage1//     }
-//mdk-stage1//     ret = execute("insmod", cmd);
-//mdk-stage1//     free(cmd);
-//mdk-stage1//     return ret;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static int try_modprobe(char *mod, char *opts)
-//mdk-stage1// {
-//mdk-stage1//     char *cmd = malloc(strlen(mod) + (opts ? strlen(opts) : 0) + 20);
-//mdk-stage1//     char *s = strrchr(mod, '/');
-//mdk-stage1//     int ret;
-//mdk-stage1// 
-//mdk-stage1//     sprintf(cmd, "modprobe %s", (s) ? s+1 : mod);
-//mdk-stage1//     if (opts) {
-//mdk-stage1// 	strcat(cmd, " ");
-//mdk-stage1// 	strcat(cmd, opts);
-//mdk-stage1//     }
-//mdk-stage1//     ret = execute("modprobe", cmd);
-//mdk-stage1//     free(cmd);
-//mdk-stage1//     return ret;
-//mdk-stage1// }
-
-static void install_module(char *mod, char *opts)
-{
-	my_insmod(mod, ANY_DRIVER_TYPE, opts, 1);
-//mdk-stage1//     module_list_t *ml;
-//mdk-stage1// 
-//mdk-stage1//     for (ml = module_list; ml != NULL; ml = ml->next)
-//mdk-stage1// 	if (strcmp(mod, ml->mod) == 0) break;
-//mdk-stage1//     if (ml == NULL) {
-//mdk-stage1// 	ml = (module_list_t *)malloc(sizeof(struct module_list_t));
-//mdk-stage1// 	ml->mod = mod;
-//mdk-stage1// 	ml->usage = 0;
-//mdk-stage1// 	ml->next = module_list;
-//mdk-stage1// 	module_list = ml;
-//mdk-stage1//     }
-//mdk-stage1//     ml->usage++;
-//mdk-stage1//     if (ml->usage != 1)
-//mdk-stage1// 	return;
-//mdk-stage1// 
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1//     if (access("/proc/bus/pccard/drivers", R_OK) == 0) {
-//mdk-stage1// 	FILE *f = fopen("/proc/bus/pccard/drivers", "r");
-//mdk-stage1// 	if (f) {
-//mdk-stage1// 	    char a[61], s[33];
-//mdk-stage1// 	    while (fgets(a, 60, f)) {
-//mdk-stage1// 		int is_kernel;
-//mdk-stage1// 		sscanf(a, "%s %d", s, &is_kernel);
-//mdk-stage1// 		if (strcmp(s, mod) != 0) continue;
-//mdk-stage1// 		/* If it isn't a module, we won't try to rmmod */
-//mdk-stage1// 		ml->usage += is_kernel;
-//mdk-stage1// 		fclose(f);
-//mdk-stage1// 		return;
-//mdk-stage1// 	    }
-//mdk-stage1// 	    fclose(f);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// #endif
-//mdk-stage1// 
-//mdk-stage1//     if (do_modprobe) {
-//mdk-stage1// 	if (try_modprobe(mod, opts) != 0)
-//mdk-stage1// 	    try_insmod(mod, opts);
-//mdk-stage1//     } else {
-//mdk-stage1// 	if (try_insmod(mod, opts) != 0)
-//mdk-stage1// 	    try_modprobe(mod, opts);
-//mdk-stage1//     }
-}
-
-//mdk-stage1// static void remove_module(char *mod)
-//mdk-stage1// {
-//mdk-stage1//     char *s, cmd[128];
-//mdk-stage1//     module_list_t *ml;
-//mdk-stage1// 
-//mdk-stage1//     for (ml = module_list; ml != NULL; ml = ml->next)
-//mdk-stage1// 	if (strcmp(mod, ml->mod) == 0) break;
-//mdk-stage1//     if (ml != NULL) {
-//mdk-stage1// 	ml->usage--;
-//mdk-stage1// 	if (ml->usage == 0) {
-//mdk-stage1// 	    /* Strip off leading path names */
-//mdk-stage1// 	    s = strrchr(mod, '/');
-//mdk-stage1// 	    s = (s) ? s+1 : mod;
-//mdk-stage1// 	    sprintf(cmd, do_modprobe ? "modprobe -r %s" : "rmmod %s", s);
-//mdk-stage1// 	    execute(do_modprobe ? "modprobe" : "rmmod", cmd);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// #endif /* __linux__ */
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// #ifdef __BEOS__
-//mdk-stage1// 
-//mdk-stage1// #define install_module(a,b)
-//mdk-stage1// #define remove_module(a)
-//mdk-stage1// 
-//mdk-stage1// static void republish_driver(char *mod)
-//mdk-stage1// {
-//mdk-stage1//     int fd = open("/dev", O_RDWR);
-//mdk-stage1//     write(fd, mod, strlen(mod));
-//mdk-stage1//     close(fd);
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// #endif /* __BEOS__ */
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-
-static mtd_ident_t *lookup_mtd(region_info_t *region)
-{
-    mtd_ident_t *mtd;
-    int match = 0;
-    
-    for (mtd = root_mtd; mtd; mtd = mtd->next) {
-	switch (mtd->mtd_type) {
-	case JEDEC_MTD:
-	    if ((mtd->jedec_mfr == region->JedecMfr) &&
-		(mtd->jedec_info == region->JedecInfo)) {
-		match = 1;
-		break;
-	    }
-	case DTYPE_MTD:
-	    break;
-	default:
-	    break;
-	}
-	if (match) break;
-    }
-    if (mtd)
-	return mtd;
-    else
-	return default_mtd;
-}
-
-/*====================================================================*/
-
-static void bind_mtd(int sn)
-{
-    socket_info_t *s = &socket[sn];
-    region_info_t region;
-    bind_info_t bind;
-    mtd_info_t mtd_info;
-    mtd_ident_t *mtd;
-    int i, attr, ret, nr;
-
-    nr = 0;
-    for (attr = 0; attr < 2; attr++) {
-	region.Attributes = attr;
-	ret = ioctl(s->fd, DS_GET_FIRST_REGION, &region);
-	while (ret == 0) {
-	    mtd = lookup_mtd(&region);
-	    if (mtd) {
-		/* Have we seen this MTD before? */
-		for (i = 0; i < nr; i++)
-		    if (s->mtd[i] == mtd) break;
-		if (i == nr) {
-		    install_module(mtd->module, mtd->opts);
-		    s->mtd[nr] = mtd;
-		    mtd->refs++;
-		    nr++;
-		}
-		log_message("CM: %s memory region at 0x%x: %s",
-		       attr ? "Attribute" : "Common", region.CardOffset,
-		       mtd->name);
-		/* Bind MTD to this region */
-		strcpy(mtd_info.dev_info, s->mtd[i]->module);
-		mtd_info.Attributes = region.Attributes;
-		mtd_info.CardOffset = region.CardOffset;
-		if (ioctl(s->fd, DS_BIND_MTD, &mtd_info) != 0) {
-		    log_message("CM: bind MTD '%s' to region at 0x%x failed: %m",
-			   (char *)mtd_info.dev_info, region.CardOffset);
-		}
-	    }
-	    ret = ioctl(s->fd, DS_GET_NEXT_REGION, &region);
-	}
-    }
-    s->mtd[nr] = NULL;
-    
-    /* Now bind each unique MTD as a normal client of this socket */
-    for (i = 0; i < nr; i++) {
-	strcpy(bind.dev_info, s->mtd[i]->module);
-	bind.function = 0;
-	if (ioctl(s->fd, DS_BIND_REQUEST, &bind) != 0)
-	    log_message("CM: bind MTD '%s' to socket %d failed: %m",
-		   (char *)bind.dev_info, sn);
-    }
-}
-
-/*====================================================================*/
-
-static void update_cis(socket_info_t *s)
-{
-    cisdump_t cis;
-    FILE *f = fopen(s->card->cis_file, "r");
-    if (f == NULL)
-	log_message("CM: could not open '%s': %m", s->card->cis_file);
-    else {
-	cis.Length = fread(cis.Data, 1, CISTPL_MAX_CIS_SIZE, f);
-	fclose(f);
-	if (ioctl(s->fd, DS_REPLACE_CIS, &cis) != 0)
-	    log_message("CM: could not replace CIS: %m");
-    }
-}
-
-/*====================================================================*/
-
-static void do_insert(int sn)
-{
-    socket_info_t *s = &socket[sn];
-    card_info_t *card;
-    device_info_t **dev;
-    bind_info_t *bind, **tail;
-    int i, j, ret;
-
-    /* Already identified? */
-    if ((s->card != NULL) && (s->card != blank_card))
-	return;
-
-    log_message("CM: initializing socket %d", sn);
-    card = lookup_card(sn);
-    if (s->state & SOCKET_HOTPLUG) {
-	write_stab();
-	return;
-    }
-    /* Make sure we've learned something new before continuing */
-    if (card == s->card)
-	return;
-    s->card = card;
-    card->refs++;
-    if (card->cis_file) update_cis(s);
-
-    dev = card->device;
-
-    /* Set up MTD's */
-    for (i = 0; i < card->bindings; i++)
-	if (dev[i]->needs_mtd)
-	    break;
-    if (i < card->bindings)
-	bind_mtd(sn);
-
-#ifdef __linux__
-    /* Install kernel modules */
-    for (i = 0; i < card->bindings; i++) {
-	dev[i]->refs++;
-	for (j = 0; j < dev[i]->modules; j++)
-	    install_module(dev[i]->module[j], dev[i]->opts[j]);
-    }
-#endif
-    
-    /* Bind drivers by their dev_info identifiers */
-    for (i = 0; i < card->bindings; i++) {
-	bind = calloc(1, sizeof(bind_info_t));
-	strcpy((char *)bind->dev_info, (char *)dev[i]->dev_info);
-	if (strcmp(bind->dev_info, "cb_enabler") == 0)
-	    bind->function = BIND_FN_ALL;
-	else
-	    bind->function = card->dev_fn[i];
-	if (ioctl(s->fd, DS_BIND_REQUEST, bind) != 0) {
-	    if (errno == EBUSY) {
-		log_message("CM: '%s' already bound to socket %d",
-		       (char *)bind->dev_info, sn);
-	    } else {
-		log_message("CM: bind '%s' to socket %d failed: %m",
-		       (char *)bind->dev_info, sn);
-		beep(BEEP_TIME, BEEP_ERR);
-		write_stab();
-		return;
-	    }
-	}
-
-#ifdef __BEOS__
-	republish_driver(dev[i]->module[0]);
-#endif
-
-	for (ret = j = 0; j < 10; j++) {
-	    ret = ioctl(s->fd, DS_GET_DEVICE_INFO, bind);
-	    if ((ret == 0) || (errno != EAGAIN))
-		break;
-	    usleep(100000);
-	}
-	if (ret != 0) {
-	    log_message("CM: get dev info on socket %d failed: %m",
-		   sn);
-	    ioctl(s->fd, DS_UNBIND_REQUEST, bind);
-	    beep(BEEP_TIME, BEEP_ERR);
-	    write_stab();
-	    return;
-	}
-	tail = &s->bind[i];
-	while (ret == 0) {
-	    bind_info_t *old;
-#ifdef __linux__
-	    if ((strlen(bind->name) > 3) && (bind->name[2] == '#'))
-		xlate_scsi_name(bind);
-#endif
-	    old = *tail = bind; tail = (bind_info_t **)&bind->next;
-	    bind = (bind_info_t *)malloc(sizeof(bind_info_t));
-	    memcpy(bind, old, sizeof(bind_info_t));
-	    ret = ioctl(s->fd, DS_GET_NEXT_DEVICE, bind);
-	}
-	*tail = NULL; free(bind);
-	write_stab();
-    }
-
-//mdk-stage1//     /* Run "start" commands */
-//mdk-stage1//     for (i = ret = 0; i < card->bindings; i++)
-//mdk-stage1// 	if (dev[i]->class)
-//mdk-stage1// 	    ret |= execute_on_all("start", dev[i]->class, sn, i);
-//mdk-stage1//     beep(BEEP_TIME, (ret) ? BEEP_ERR : BEEP_OK);
-    
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static int do_check(int sn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     card_info_t *card;
-//mdk-stage1//     device_info_t **dev;
-//mdk-stage1//     int i, ret;
-//mdk-stage1// 
-//mdk-stage1//     card = s->card;
-//mdk-stage1//     if (card == NULL)
-//mdk-stage1// 	return 0;
-//mdk-stage1//     
-//mdk-stage1//     /* Run "check" commands */
-//mdk-stage1//     dev = card->device;
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (dev[i]->class) {
-//mdk-stage1// 	    ret = execute_on_all("check", dev[i]->class, sn, i);
-//mdk-stage1// 	    if (ret != 0)
-//mdk-stage1// 		return CS_IN_USE;
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     return 0;
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void do_remove(int sn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     card_info_t *card;
-//mdk-stage1//     device_info_t **dev;
-//mdk-stage1//     bind_info_t *bind;
-//mdk-stage1//     int i, j;
-//mdk-stage1// 
-//mdk-stage1//     if (verbose) syslog(LOG_INFO, "shutting down socket %d", sn);
-//mdk-stage1// 
-//mdk-stage1//     card = s->card;
-//mdk-stage1//     if (card == NULL)
-//mdk-stage1// 	goto done;
-//mdk-stage1// 
-//mdk-stage1//     /* Run "stop" commands */
-//mdk-stage1//     dev = card->device;
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (dev[i]->class) {
-//mdk-stage1// 	    execute_on_all("stop", dev[i]->class, sn, i);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1//     /* unbind driver instances */
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (s->bind[i]) {
-//mdk-stage1// 	    if (ioctl(s->fd, DS_UNBIND_REQUEST, s->bind[i]) != 0)
-//mdk-stage1// 		syslog(LOG_INFO, "unbind '%s' from socket %d failed: %m",
-//mdk-stage1// 		       (char *)s->bind[i]->dev_info, sn);
-//mdk-stage1// 	    while (s->bind[i]) {
-//mdk-stage1// 		bind = s->bind[i];
-//mdk-stage1// 		s->bind[i] = bind->next;
-//mdk-stage1// 		free(bind);
-//mdk-stage1// 	    }
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     for (i = 0; (s->mtd[i] != NULL); i++) {
-//mdk-stage1// 	bind_info_t b;
-//mdk-stage1// 	strcpy(b.dev_info, s->mtd[i]->module);
-//mdk-stage1// 	b.function = 0;
-//mdk-stage1// 	if (ioctl(s->fd, DS_UNBIND_REQUEST, &b) != 0)
-//mdk-stage1// 	    syslog(LOG_INFO, "unbind MTD '%s' from socket %d failed: %m",
-//mdk-stage1// 		   s->mtd[i]->module, sn);
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1//     /* remove kernel modules in inverse order */
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	for (j = dev[i]->modules-1; j >= 0; j--)
-//mdk-stage1// 	    remove_module(dev[i]->module[j]);
-//mdk-stage1// 	free_device(dev[i]);
-//mdk-stage1//     }
-//mdk-stage1//     /* Remove any MTD's bound to this socket */
-//mdk-stage1//     for (i = 0; (s->mtd[i] != NULL); i++) {
-//mdk-stage1// 	remove_module(s->mtd[i]->module);
-//mdk-stage1// 	free_mtd(s->mtd[i]);
-//mdk-stage1// 	s->mtd[i] = NULL;
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1// done:
-//mdk-stage1//     beep(BEEP_TIME, BEEP_OK);
-//mdk-stage1//     free_card(card);
-//mdk-stage1//     s->card = NULL;
-//mdk-stage1//     write_stab();
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void do_suspend(int sn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     card_info_t *card;
-//mdk-stage1//     device_info_t **dev;
-//mdk-stage1//     int i, ret;
-//mdk-stage1//     
-//mdk-stage1//     card = s->card;
-//mdk-stage1//     if (card == NULL)
-//mdk-stage1// 	return;
-//mdk-stage1//     dev = card->device;
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (dev[i]->class) {
-//mdk-stage1// 	    ret = execute_on_all("suspend", dev[i]->class, sn, i);
-//mdk-stage1// 	    if (ret != 0)
-//mdk-stage1// 		beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void do_resume(int sn)
-//mdk-stage1// {
-//mdk-stage1//     socket_info_t *s = &socket[sn];
-//mdk-stage1//     card_info_t *card;
-//mdk-stage1//     device_info_t **dev;
-//mdk-stage1//     int i, ret;
-//mdk-stage1//     
-//mdk-stage1//     card = s->card;
-//mdk-stage1//     if (card == NULL)
-//mdk-stage1// 	return;
-//mdk-stage1//     dev = card->device;
-//mdk-stage1//     for (i = 0; i < card->bindings; i++) {
-//mdk-stage1// 	if (dev[i]->class) {
-//mdk-stage1// 	    ret = execute_on_all("resume", dev[i]->class, sn, i);
-//mdk-stage1// 	    if (ret != 0)
-//mdk-stage1// 		beep(BEEP_TIME, BEEP_ERR);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static void wait_for_pending(void)
-{
-    cs_status_t status;
-    int i;
-    status.Function = 0;
-    for (;;) {
-	usleep(100000);
-	for (i = 0; i < sockets; i++)
-	    if ((ioctl(socket[i].fd, DS_GET_STATUS, &status) == 0) &&
-		(status.CardState & CS_EVENT_CARD_INSERTION))
-		break;
-	if (i == sockets) break;
-    }
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static void free_resources(void)
-//mdk-stage1// {
-//mdk-stage1//     adjust_list_t *al;
-//mdk-stage1//     int fd = socket[0].fd;
-//mdk-stage1// 
-//mdk-stage1//     for (al = root_adjust; al; al = al->next) {
-//mdk-stage1// 	if (al->adj.Action == ADD_MANAGED_RESOURCE) {
-//mdk-stage1// 	    al->adj.Action = REMOVE_MANAGED_RESOURCE;
-//mdk-stage1// 	    ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
-//mdk-stage1// 	} else if ((al->adj.Action == REMOVE_MANAGED_RESOURCE) &&
-//mdk-stage1// 		   (al->adj.Resource == RES_IRQ)) {
-//mdk-stage1// 	    al->adj.Action = ADD_MANAGED_RESOURCE;
-//mdk-stage1// 	    ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static void adjust_resources(void)
-{
-    adjust_list_t *al;
-    int ret;
-    char tmp[64];
-    int fd = socket[0].fd;
-    
-    for (al = root_adjust; al; al = al->next) {
-	ret = ioctl(fd, DS_ADJUST_RESOURCE_INFO, &al->adj);
-	if (ret != 0) {
-	    switch (al->adj.Resource) {
-	    case RES_MEMORY_RANGE:
-		sprintf(tmp, "memory %#lx-%#lx",
-			al->adj.resource.memory.Base,
-			al->adj.resource.memory.Base +
-			al->adj.resource.memory.Size - 1);
-		break;
-	    case RES_IO_RANGE:
-		sprintf(tmp, "IO ports %#x-%#x",
-			al->adj.resource.io.BasePort,
-			al->adj.resource.io.BasePort +
-			al->adj.resource.io.NumPorts - 1);
-		break;
-	    case RES_IRQ:
-		sprintf(tmp, "irq %u", al->adj.resource.irq.IRQ);
-		break;
-	    }
-	    log_message("CM: could not adjust resource: %s: %m", tmp);
-	}
-    }
-}
-    
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// static int cleanup_files = 0;
-//mdk-stage1// 
-//mdk-stage1// static void fork_now(void)
-//mdk-stage1// {
-//mdk-stage1//     int ret;
-//mdk-stage1//     if ((ret = fork()) > 0) {
-//mdk-stage1// 	cleanup_files = 0;
-//mdk-stage1// 	exit(0);
-//mdk-stage1//     }
-//mdk-stage1//     if (ret == -1)
-//mdk-stage1// 	syslog(LOG_ERR, "forking: %m");
-//mdk-stage1//     if (setsid() < 0)
-//mdk-stage1// 	syslog(LOG_ERR, "detaching from tty: %m");
-//mdk-stage1// }    
-//mdk-stage1// 
-//mdk-stage1// static void done(void)
-//mdk-stage1// {
-//mdk-stage1//     syslog(LOG_INFO, "exiting");
-//mdk-stage1//     if (cleanup_files) {
-//mdk-stage1// 	unlink(pidfile);
-//mdk-stage1// 	unlink(stabfile);
-//mdk-stage1//     }
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// /* most recent signal */
-//mdk-stage1// static int caught_signal = 0;
-//mdk-stage1// 
-//mdk-stage1// static void catch_signal(int sig)
-//mdk-stage1// {
-//mdk-stage1//     caught_signal = sig;
-//mdk-stage1//     if (signal(sig, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_INFO, "signal(%d): %m", sig);
-//mdk-stage1// }
-//mdk-stage1// 
-//mdk-stage1// static void handle_signal(void)
-//mdk-stage1// {
-//mdk-stage1//     int i;
-//mdk-stage1//     switch (caught_signal) {
-//mdk-stage1//     case SIGTERM:
-//mdk-stage1//     case SIGINT:
-//mdk-stage1// 	for (i = 0; i < sockets; i++)
-//mdk-stage1// 	    if ((socket[i].state & SOCKET_PRESENT) &&
-//mdk-stage1// 		(do_check(i) == 0)) do_remove(i);
-//mdk-stage1// 	free_resources();
-//mdk-stage1// 	exit(0);
-//mdk-stage1// 	break;
-//mdk-stage1//     case SIGHUP:
-//mdk-stage1// 	free_resources();
-//mdk-stage1// 	free_config();
-//mdk-stage1// 	syslog(LOG_INFO, "re-loading config file");
-//mdk-stage1// 	load_config();
-//mdk-stage1// 	adjust_resources();
-//mdk-stage1// 	break;
-//mdk-stage1// #ifdef SIGPWR
-//mdk-stage1//     case SIGPWR:
-//mdk-stage1// 	break;
-//mdk-stage1// #endif
-//mdk-stage1//     }
-//mdk-stage1// }
-
-/*====================================================================*/
-
-static int init_sockets(void)
-{
-    int fd, i;
-    servinfo_t serv;
-
-#ifdef __linux__
-    major = lookup_dev("pcmcia");
-    if (major < 0) {
-	if (major == -ENODEV)
-	    log_message("CM: no pcmcia driver in /proc/devices");
-	else
-	    log_message("CM: could not open /proc/devices: %m");
-	return -1;
-    }
-#endif
-    for (fd = -1, i = 0; i < MAX_SOCKS; i++) {
-	fd = open_sock(i, S_IFCHR|S_IREAD|S_IWRITE);
-	if (fd < 0) break;
-	socket[i].fd = fd;
-	socket[i].state = 0;
-    }
-    if ((fd < 0) && (errno != ENODEV) && (errno != ENOENT))
-	log_message("CM: open_sock(socket %d) failed: %m", i);
-    sockets = i;
-    if (sockets == 0) {
-	log_message("CM: no sockets found!");
-	return -1;
-    } else
-	log_message("CM: watching %d sockets", sockets);
-
-    if (ioctl(socket[0].fd, DS_GET_CARD_SERVICES_INFO, &serv) == 0) {
-	if (serv.Revision != CS_RELEASE_CODE)
-	    log_message("CM: warning, Card Services release does not match kernel (generally harmless)");
-    } else {
-	log_message("CM: could not get CS revision info!");
-	return -1;
-    }
-    adjust_resources();
-    return 0;
-}
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// int main(int argc, char *argv[])
-//mdk-stage1// {
-//mdk-stage1//     int optch, errflg;
-//mdk-stage1//     int i, max_fd, ret, event, pass;
-//mdk-stage1//     int delay_fork = 0;
-//mdk-stage1//     struct timeval tv;
-//mdk-stage1//     fd_set fds;
-//mdk-stage1// 
-//mdk-stage1//     if (access("/var/lib/pcmcia", R_OK) == 0) {
-//mdk-stage1// 	stabfile = "/var/lib/pcmcia/stab";
-//mdk-stage1//     } else {
-//mdk-stage1// 	stabfile = "/var/run/stab";
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1//     errflg = 0;
-//mdk-stage1//     while ((optch = getopt(argc, argv, "Vqdvofc:m:p:s:")) != -1) {
-//mdk-stage1// 	switch (optch) {
-//mdk-stage1// 	case 'V':
-//mdk-stage1// 	    fprintf(stderr, "cardmgr version " CS_RELEASE "\n");
-//mdk-stage1// 	    return 0;
-//mdk-stage1// 	    break;
-//mdk-stage1// 	case 'q':
-//mdk-stage1// 	    be_quiet = 1; break;
-//mdk-stage1// 	case 'v':
-//mdk-stage1// 	    verbose = 1; break;
-//mdk-stage1// 	case 'o':
-//mdk-stage1// 	    one_pass = 1; break;
-//mdk-stage1// 	case 'f':
-//mdk-stage1// 	    delay_fork = 1; break;
-//mdk-stage1// 	case 'c':
-//mdk-stage1// 	    configpath = strdup(optarg); break;
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1// 	case 'd':
-//mdk-stage1// 	    do_modprobe = 1; break;
-//mdk-stage1// 	case 'm':
-//mdk-stage1// 	    modpath = strdup(optarg); break;
-//mdk-stage1// #endif
-//mdk-stage1// 	case 'p':
-//mdk-stage1// 	    pidfile = strdup(optarg); break;
-//mdk-stage1// 	case 's':
-//mdk-stage1// 	    stabfile = strdup(optarg); break;
-//mdk-stage1// 	default:
-//mdk-stage1// 	    errflg = 1; break;
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     if (errflg || (optind < argc)) {
-//mdk-stage1// 	fprintf(stderr, "usage: %s [-V] [-q] [-v] [-d] [-o] [-f] "
-//mdk-stage1// 		"[-c configpath] [-m modpath]\n               "
-//mdk-stage1// 		"[-p pidfile] [-s stabfile]\n", argv[0]);
-//mdk-stage1// 	exit(EXIT_FAILURE);
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1// #ifdef DEBUG
-//mdk-stage1//     openlog("cardmgr", LOG_PID|LOG_PERROR, LOG_DAEMON);
-//mdk-stage1// #else
-//mdk-stage1//     openlog("cardmgr", LOG_PID|LOG_CONS, LOG_DAEMON);
-//mdk-stage1//     close(0); close(1); close(2);
-//mdk-stage1//     if (!delay_fork && !one_pass)
-//mdk-stage1// 	fork_now();
-//mdk-stage1// #endif
-//mdk-stage1//     
-//mdk-stage1//     syslog(LOG_INFO, "starting, version is " CS_RELEASE);
-//mdk-stage1//     atexit(&done);
-//mdk-stage1//     putenv("PATH=/bin:/sbin:/usr/bin:/usr/sbin");
-//mdk-stage1//     if (verbose)
-//mdk-stage1// 	putenv("VERBOSE=1");
-//mdk-stage1// 
-//mdk-stage1// #ifdef __linux__
-//mdk-stage1//     if (modpath == NULL) {
-//mdk-stage1// 	if (access("/lib/modules/preferred", X_OK) == 0)
-//mdk-stage1// 	    modpath = "/lib/modules/preferred";
-//mdk-stage1// 	else {
-//mdk-stage1// 	    struct utsname utsname;
-//mdk-stage1// 	    if (uname(&utsname) != 0) {
-//mdk-stage1// 		syslog(LOG_ERR, "uname(): %m");
-//mdk-stage1// 		exit(EXIT_FAILURE);
-//mdk-stage1// 	    }
-//mdk-stage1// 	    modpath = (char *)malloc(strlen(utsname.release)+14);
-//mdk-stage1// 	    sprintf(modpath, "/lib/modules/%s", utsname.release);
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     if (access(modpath, X_OK) != 0)
-//mdk-stage1// 	syslog(LOG_INFO, "cannot access %s: %m", modpath);
-//mdk-stage1//     /* We default to using modprobe if it is available */
-//mdk-stage1//     do_modprobe |= (access("/sbin/modprobe", X_OK) == 0);
-//mdk-stage1// #endif /* __linux__ */
-//mdk-stage1//     
-//mdk-stage1//     load_config();
-//mdk-stage1//     
-//mdk-stage1//     if (init_sockets() != 0)
-//mdk-stage1// 	exit(EXIT_FAILURE);
-//mdk-stage1// 
-//mdk-stage1//     /* If we've gotten this far, then clean up pid and stab at exit */
-//mdk-stage1//     write_pid();
-//mdk-stage1//     write_stab();
-//mdk-stage1//     cleanup_files = 1;
-//mdk-stage1//     
-//mdk-stage1//     if (signal(SIGHUP, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_ERR, "signal(SIGHUP): %m");
-//mdk-stage1//     if (signal(SIGTERM, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_ERR, "signal(SIGTERM): %m");
-//mdk-stage1//     if (signal(SIGINT, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_ERR, "signal(SIGINT): %m");
-//mdk-stage1// #ifdef SIGPWR
-//mdk-stage1//     if (signal(SIGPWR, catch_signal) == SIG_ERR)
-//mdk-stage1// 	syslog(LOG_ERR, "signal(SIGPWR): %m");
-//mdk-stage1// #endif
-//mdk-stage1//     
-//mdk-stage1//     for (i = max_fd = 0; i < sockets; i++)
-//mdk-stage1// 	max_fd = (socket[i].fd > max_fd) ? socket[i].fd : max_fd;
-//mdk-stage1// 
-//mdk-stage1//     /* First select() call: poll, don't wait */
-//mdk-stage1//     tv.tv_sec = tv.tv_usec = 0;
-//mdk-stage1// 
-//mdk-stage1//     /* Wait for sockets in setup-pending state to settle */
-//mdk-stage1//     if (one_pass || delay_fork)
-//mdk-stage1// 	wait_for_pending();
-//mdk-stage1//     
-//mdk-stage1//     for (pass = 0; ; pass++) {
-//mdk-stage1// 	FD_ZERO(&fds);
-//mdk-stage1// 	for (i = 0; i < sockets; i++)
-//mdk-stage1// 	    FD_SET(socket[i].fd, &fds);
-//mdk-stage1// 
-//mdk-stage1// 	while ((ret = select(max_fd+1, &fds, NULL, NULL,
-//mdk-stage1// 			     ((pass == 0) ? &tv : NULL))) < 0) {
-//mdk-stage1// 	    if (errno == EINTR) {
-//mdk-stage1// 		handle_signal();
-//mdk-stage1// 	    } else {
-//mdk-stage1// 		syslog(LOG_ERR, "select(): %m");
-//mdk-stage1// 		exit(EXIT_FAILURE);
-//mdk-stage1// 	    }
-//mdk-stage1// 	}
-//mdk-stage1// 
-//mdk-stage1// 	for (i = 0; i < sockets; i++) {
-//mdk-stage1// 	    if (!FD_ISSET(socket[i].fd, &fds))
-//mdk-stage1// 		continue;
-//mdk-stage1// 	    ret = read(socket[i].fd, &event, 4);
-//mdk-stage1// 	    if ((ret == -1) && (errno != EAGAIN))
-//mdk-stage1// 		syslog(LOG_INFO, "read(%d): %m\n", i);
-//mdk-stage1// 	    if (ret != 4)
-//mdk-stage1// 		continue;
-//mdk-stage1// 	    
-//mdk-stage1// 	    switch (event) {
-//mdk-stage1// 	    case CS_EVENT_CARD_REMOVAL:
-//mdk-stage1// 		socket[i].state = 0;
-//mdk-stage1// 		do_remove(i);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_EJECTION_REQUEST:
-//mdk-stage1// 		ret = do_check(i);
-//mdk-stage1// 		if (ret == 0) {
-//mdk-stage1// 		    socket[i].state = 0;
-//mdk-stage1// 		    do_remove(i);
-//mdk-stage1// 		}
-//mdk-stage1// 		write(socket[i].fd, &ret, 4);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_CARD_INSERTION:
-//mdk-stage1// 	    case CS_EVENT_INSERTION_REQUEST:
-//mdk-stage1// 		socket[i].state |= SOCKET_PRESENT;
-//mdk-stage1// 	    case CS_EVENT_CARD_RESET:
-//mdk-stage1// 		socket[i].state |= SOCKET_READY;
-//mdk-stage1// 		do_insert(i);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_RESET_PHYSICAL:
-//mdk-stage1// 		socket[i].state &= ~SOCKET_READY;
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_PM_SUSPEND:
-//mdk-stage1// 		do_suspend(i);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    case CS_EVENT_PM_RESUME:
-//mdk-stage1// 		do_resume(i);
-//mdk-stage1// 		break;
-//mdk-stage1// 	    }
-//mdk-stage1// 	    
-//mdk-stage1// 	}
-//mdk-stage1// 
-//mdk-stage1// 	if (one_pass)
-//mdk-stage1// 	    exit(EXIT_SUCCESS);
-//mdk-stage1// 	if (delay_fork) {
-//mdk-stage1// 	    fork_now();
-//mdk-stage1// 	    write_pid();
-//mdk-stage1// 	}
-//mdk-stage1// 	
-//mdk-stage1//     } /* repeat */
-//mdk-stage1//     return 0;
-//mdk-stage1// }
-
-
-
-static void cardmgr_fail(void)
-{
-	log_message("CM: cardmgr: failed");
-}
-
-int cardmgr_call(void)
-{
-	int i, max_fd, ret, event;
-	struct timeval tv;
-	fd_set fds;
-	
-	stabfile = "/var/run/stab";
-	
-	log_message("CM: cardmgr/hacked starting, version is " CS_RELEASE);
-	
-	if (load_config()) {
-		cardmgr_fail();
-		return -1;
-	}
-	
-	if (init_sockets()) {
-		cardmgr_fail();
-		return -1;
-	}
-	
-	/* If we've gotten this far, then clean up pid and stab at exit */
-	write_stab();
-    
-	for (i = max_fd = 0; i < sockets; i++)
-		max_fd = (socket[i].fd > max_fd) ? socket[i].fd : max_fd;
-
-	/* First select() call: poll, don't wait */
-	tv.tv_sec = tv.tv_usec = 0;
-
-	/* Wait for sockets in setup-pending state to settle */
-	wait_for_pending();
-    
-
-	FD_ZERO(&fds);
-	for (i = 0; i < sockets; i++)
-		FD_SET(socket[i].fd, &fds);
-
-	if (select(max_fd+1, &fds, NULL, NULL, &tv) < 0) {
-		log_perror("CM: select fails");
-		return -1;
-	}
-
-	for (i = 0; i < sockets; i++) {
-		if (!FD_ISSET(socket[i].fd, &fds))
-			continue;
-		ret = read(socket[i].fd, &event, 4);
-		if ((ret == -1) && (errno != EAGAIN))
-			log_message("CM: read(%d): %m", i);
-		if (ret != 4)
-			continue;
-	    
-		switch (event) {
-		case CS_EVENT_CARD_INSERTION:
-		case CS_EVENT_INSERTION_REQUEST:
-			socket[i].state |= SOCKET_PRESENT;
-		case CS_EVENT_CARD_RESET:
-			socket[i].state |= SOCKET_READY;
-			do_insert(i);
-			break;
-		case CS_EVENT_RESET_PHYSICAL:
-			socket[i].state &= ~SOCKET_READY;
-			break;
-		}
-	    
-	}
-
-	return 0;
-	
-}
diff --git a/mdk-stage1/pcmcia_/cardmgr.h b/mdk-stage1/pcmcia_/cardmgr.h
deleted file mode 100644
index 1d002e972..000000000
--- a/mdk-stage1/pcmcia_/cardmgr.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * cardmgr.h 1.37 2001/08/24 12:19:20
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#define MAX_SOCKS	8
-#define MAX_BINDINGS	4
-#define MAX_MODULES	4
-
-typedef struct adjust_list_t {
-    adjust_t		adj;
-    struct adjust_list_t *next;
-} adjust_list_t;
-
-typedef struct func_ident_t {
-    u_char		funcid;
-} func_ident_t;
-
-typedef struct manfid_ident_t {
-    u_short		manf;
-    u_short		card;
-} manfid_ident_t;
-
-typedef struct vers_ident_t {
-    int			ns;
-    char		*pi[4];
-} vers_ident_t;
-
-typedef struct tuple_ident_t {
-    cisdata_t		code;
-    long		ofs;
-    char		*info;
-} tuple_ident_t;
-
-typedef struct device_info_t {
-    dev_info_t		dev_info;
-    int			needs_mtd;
-    int			modules;
-    char		*module[MAX_MODULES];
-    char		*opts[MAX_MODULES];
-    char		*class;
-    int			refs;
-    struct device_info_t *next;
-} device_info_t;
-
-#define VERS_1_IDENT	0x0001
-#define MANFID_IDENT	0x0002
-#define TUPLE_IDENT	0x0010
-#define FUNC_IDENT	0x0020
-#define BLANK_IDENT	0x0040
-#define PCI_IDENT	0x0080
-#define EXCL_IDENT	0x00f0
-
-typedef struct card_info_t {
-    char		*name;
-    int			ident_type;
-    union {
-	vers_ident_t	vers;
-	tuple_ident_t	tuple;
-	func_ident_t	func;
-    } id;
-    manfid_ident_t	manfid;
-    int			bindings;
-    device_info_t	*device[MAX_BINDINGS];
-    int			dev_fn[MAX_BINDINGS];
-    char		*cis_file;
-    int			refs;
-    struct card_info_t	*next;
-} card_info_t;
-
-typedef struct mtd_ident_t {
-    char		*name;
-    enum {
-	JEDEC_MTD=1, DTYPE_MTD, DEFAULT_MTD
-    } mtd_type;
-    int			dtype, jedec_mfr, jedec_info;
-    char		*module, *opts;
-    int			refs;
-    struct mtd_ident_t	*next;
-} mtd_ident_t;
-    
-extern adjust_list_t	*root_adjust;
-extern device_info_t	*root_device;
-extern card_info_t	*blank_card;
-extern card_info_t	*root_card, *root_func;
-extern mtd_ident_t	*root_mtd, *default_mtd;
-
-int parse_configfile(char *fn);
diff --git a/mdk-stage1/pcmcia_/cirrus.h b/mdk-stage1/pcmcia_/cirrus.h
deleted file mode 100644
index 78f73b26d..000000000
--- a/mdk-stage1/pcmcia_/cirrus.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * cirrus.h 1.10 2001/08/24 12:15:33
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CIRRUS_H
-#define _LINUX_CIRRUS_H
-
-#ifndef PCI_VENDOR_ID_CIRRUS
-#define PCI_VENDOR_ID_CIRRUS		0x1013
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6729
-#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6832
-#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
-#endif
-
-#define PD67_MISC_CTL_1		0x16	/* Misc control 1 */
-#define PD67_FIFO_CTL		0x17	/* FIFO control */
-#define PD67_MISC_CTL_2		0x1E	/* Misc control 2 */
-#define PD67_CHIP_INFO		0x1f	/* Chip information */
-#define PD67_ATA_CTL		0x026	/* 6730: ATA control */
-#define PD67_EXT_INDEX		0x2e	/* Extension index */
-#define PD67_EXT_DATA		0x2f	/* Extension data */
-
-/* PD6722 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD67_DATA_MASK0		0x01	/* Data mask 0 */
-#define PD67_DATA_MASK1		0x02	/* Data mask 1 */
-#define PD67_DMA_CTL		0x03	/* DMA control */
-
-/* PD6730 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD67_EXT_CTL_1		0x03	/* Extension control 1 */
-#define PD67_MEM_PAGE(n)	((n)+5)	/* PCI window bits 31:24 */
-#define PD67_EXTERN_DATA	0x0a
-#define PD67_MISC_CTL_3		0x25
-#define PD67_SMB_PWR_CTL	0x26
-
-/* I/O window address offset */
-#define PD67_IO_OFF(w)		(0x36+((w)<<1))
-
-/* Timing register sets */
-#define PD67_TIME_SETUP(n)	(0x3a + 3*(n))
-#define PD67_TIME_CMD(n)	(0x3b + 3*(n))
-#define PD67_TIME_RECOV(n)	(0x3c + 3*(n))
-
-/* Flags for PD67_MISC_CTL_1 */
-#define PD67_MC1_5V_DET		0x01	/* 5v detect */
-#define PD67_MC1_MEDIA_ENA	0x01	/* 6730: Multimedia enable */
-#define PD67_MC1_VCC_3V		0x02	/* 3.3v Vcc */
-#define PD67_MC1_PULSE_MGMT	0x04
-#define PD67_MC1_PULSE_IRQ	0x08
-#define PD67_MC1_SPKR_ENA	0x10
-#define PD67_MC1_INPACK_ENA	0x80
-
-/* Flags for PD67_FIFO_CTL */
-#define PD67_FIFO_EMPTY		0x80
-
-/* Flags for PD67_MISC_CTL_2 */
-#define PD67_MC2_FREQ_BYPASS	0x01
-#define PD67_MC2_DYNAMIC_MODE	0x02
-#define PD67_MC2_SUSPEND	0x04
-#define PD67_MC2_5V_CORE	0x08
-#define PD67_MC2_LED_ENA	0x10	/* IRQ 12 is LED enable */
-#define PD67_MC2_FAST_PCI	0x10	/* 6729: PCI bus > 25 MHz */
-#define PD67_MC2_3STATE_BIT7	0x20	/* Floppy change bit */
-#define PD67_MC2_DMA_MODE	0x40
-#define PD67_MC2_IRQ15_RI	0x80	/* IRQ 15 is ring enable */
-
-/* Flags for PD67_CHIP_INFO */
-#define PD67_INFO_SLOTS		0x20	/* 0 = 1 slot, 1 = 2 slots */
-#define PD67_INFO_CHIP_ID	0xc0
-#define PD67_INFO_REV		0x1c
-
-/* Fields in PD67_TIME_* registers */
-#define PD67_TIME_SCALE		0xc0
-#define PD67_TIME_SCALE_1	0x00
-#define PD67_TIME_SCALE_16	0x40
-#define PD67_TIME_SCALE_256	0x80
-#define PD67_TIME_SCALE_4096	0xc0
-#define PD67_TIME_MULT		0x3f
-
-/* Fields in PD67_DMA_CTL */
-#define PD67_DMA_MODE		0xc0
-#define PD67_DMA_OFF		0x00
-#define PD67_DMA_DREQ_INPACK	0x40
-#define PD67_DMA_DREQ_WP	0x80
-#define PD67_DMA_DREQ_BVD2	0xc0
-#define PD67_DMA_PULLUP		0x20	/* Disable socket pullups? */
-
-/* Fields in PD67_EXT_CTL_1 */
-#define PD67_EC1_VCC_PWR_LOCK	0x01
-#define PD67_EC1_AUTO_PWR_CLEAR	0x02
-#define PD67_EC1_LED_ENA	0x04
-#define PD67_EC1_INV_CARD_IRQ	0x08
-#define PD67_EC1_INV_MGMT_IRQ	0x10
-#define PD67_EC1_PULLUP_CTL	0x20
-
-/* Fields in PD67_MISC_CTL_3 */
-#define PD67_MC3_IRQ_MASK	0x03
-#define PD67_MC3_IRQ_PCPCI	0x00
-#define PD67_MC3_IRQ_EXTERN	0x01
-#define PD67_MC3_IRQ_PCIWAY	0x02
-#define PD67_MC3_IRQ_PCI	0x03
-#define PD67_MC3_PWR_MASK	0x0c
-#define PD67_MC3_PWR_SERIAL	0x00
-#define PD67_MC3_PWR_TI2202	0x08
-#define PD67_MC3_PWR_SMB	0x0c
-
-/* Register definitions for Cirrus PD6832 PCI-to-CardBus bridge */
-
-/* PD6832 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD68_EXT_CTL_2			0x0b
-#define PD68_PCI_SPACE			0x22
-#define PD68_PCCARD_SPACE		0x23
-#define PD68_WINDOW_TYPE		0x24
-#define PD68_EXT_CSC			0x2e
-#define PD68_MISC_CTL_4			0x2f
-#define PD68_MISC_CTL_5			0x30
-#define PD68_MISC_CTL_6			0x31
-
-/* Extra flags in PD67_MISC_CTL_3 */
-#define PD68_MC3_HW_SUSP		0x10
-#define PD68_MC3_MM_EXPAND		0x40
-#define PD68_MC3_MM_ARM			0x80
-
-/* Bridge Control Register */
-#define  PD6832_BCR_MGMT_IRQ_ENA	0x0800
-
-/* Socket Number Register */
-#define PD6832_SOCKET_NUMBER		0x004c	/* 8 bit */
-
-#endif /* _LINUX_CIRRUS_H */
diff --git a/mdk-stage1/pcmcia_/cistpl.h b/mdk-stage1/pcmcia_/cistpl.h
deleted file mode 100644
index 1d4cac20e..000000000
--- a/mdk-stage1/pcmcia_/cistpl.h
+++ /dev/null
@@ -1,604 +0,0 @@
-/*
- * cistpl.h 1.35 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CISTPL_H
-#define _LINUX_CISTPL_H
-
-#define CISTPL_NULL		0x00
-#define CISTPL_DEVICE		0x01
-#define CISTPL_LONGLINK_CB	0x02
-#define CISTPL_INDIRECT		0x03
-#define CISTPL_CONFIG_CB	0x04
-#define CISTPL_CFTABLE_ENTRY_CB	0x05
-#define CISTPL_LONGLINK_MFC	0x06
-#define CISTPL_BAR		0x07
-#define CISTPL_PWR_MGMNT	0x08
-#define CISTPL_EXTDEVICE	0x09
-#define CISTPL_CHECKSUM		0x10
-#define CISTPL_LONGLINK_A	0x11
-#define CISTPL_LONGLINK_C	0x12
-#define CISTPL_LINKTARGET	0x13
-#define CISTPL_NO_LINK		0x14
-#define CISTPL_VERS_1		0x15
-#define CISTPL_ALTSTR		0x16
-#define CISTPL_DEVICE_A		0x17
-#define CISTPL_JEDEC_C		0x18
-#define CISTPL_JEDEC_A		0x19
-#define CISTPL_CONFIG		0x1a
-#define CISTPL_CFTABLE_ENTRY	0x1b
-#define CISTPL_DEVICE_OC	0x1c
-#define CISTPL_DEVICE_OA	0x1d
-#define CISTPL_DEVICE_GEO	0x1e
-#define CISTPL_DEVICE_GEO_A	0x1f
-#define CISTPL_MANFID		0x20
-#define CISTPL_FUNCID		0x21
-#define CISTPL_FUNCE		0x22
-#define CISTPL_SWIL		0x23
-#define CISTPL_END		0xff
-/* Layer 2 tuples */
-#define CISTPL_VERS_2		0x40
-#define CISTPL_FORMAT		0x41
-#define CISTPL_GEOMETRY		0x42
-#define CISTPL_BYTEORDER	0x43
-#define CISTPL_DATE		0x44
-#define CISTPL_BATTERY		0x45
-#define CISTPL_FORMAT_A		0x47
-/* Layer 3 tuples */
-#define CISTPL_ORG		0x46
-#define CISTPL_SPCL		0x90
-
-typedef struct cistpl_longlink_t {
-    u_int	addr;
-} cistpl_longlink_t;
-
-typedef struct cistpl_checksum_t {
-    u_short	addr;
-    u_short	len;
-    u_char	sum;
-} cistpl_checksum_t;
-
-#define CISTPL_MAX_FUNCTIONS	8
-#define CISTPL_MFC_ATTR		0x00
-#define CISTPL_MFC_COMMON	0x01
-
-typedef struct cistpl_longlink_mfc_t {
-    u_char	nfn;
-    struct {
-	u_char	space;
-	u_int	addr;
-    } fn[CISTPL_MAX_FUNCTIONS];
-} cistpl_longlink_mfc_t;
-
-#define CISTPL_MAX_ALTSTR_STRINGS	4
-
-typedef struct cistpl_altstr_t {
-    u_char	ns;
-    u_char	ofs[CISTPL_MAX_ALTSTR_STRINGS];
-    char	str[254];
-} cistpl_altstr_t;
-
-#define CISTPL_DTYPE_NULL	0x00
-#define CISTPL_DTYPE_ROM	0x01
-#define CISTPL_DTYPE_OTPROM	0x02
-#define CISTPL_DTYPE_EPROM	0x03
-#define CISTPL_DTYPE_EEPROM	0x04
-#define CISTPL_DTYPE_FLASH	0x05
-#define CISTPL_DTYPE_SRAM	0x06
-#define CISTPL_DTYPE_DRAM	0x07
-#define CISTPL_DTYPE_FUNCSPEC	0x0d
-#define CISTPL_DTYPE_EXTEND	0x0e
-
-#define CISTPL_MAX_DEVICES	4
-
-typedef struct cistpl_device_t {
-    u_char	ndev;
-    struct {
-	u_char 	type;
-	u_char	wp;
-	u_int	speed;
-	u_int	size;
-    } dev[CISTPL_MAX_DEVICES];
-} cistpl_device_t;
-
-#define CISTPL_DEVICE_MWAIT	0x01
-#define CISTPL_DEVICE_3VCC	0x02
-
-typedef struct cistpl_device_o_t {
-    u_char		flags;
-    cistpl_device_t	device;
-} cistpl_device_o_t;
-
-#define CISTPL_VERS_1_MAX_PROD_STRINGS	4
-
-typedef struct cistpl_vers_1_t {
-    u_char	major;
-    u_char	minor;
-    u_char	ns;
-    u_char	ofs[CISTPL_VERS_1_MAX_PROD_STRINGS];
-    char	str[254];
-} cistpl_vers_1_t;
-
-typedef struct cistpl_jedec_t {
-    u_char	nid;
-    struct {
-	u_char	mfr;
-	u_char	info;
-    } id[CISTPL_MAX_DEVICES];
-} cistpl_jedec_t;
-
-typedef struct cistpl_manfid_t {
-    u_short	manf;
-    u_short	card;
-} cistpl_manfid_t;
-
-#define CISTPL_FUNCID_MULTI	0x00
-#define CISTPL_FUNCID_MEMORY	0x01
-#define CISTPL_FUNCID_SERIAL	0x02
-#define CISTPL_FUNCID_PARALLEL	0x03
-#define CISTPL_FUNCID_FIXED	0x04
-#define CISTPL_FUNCID_VIDEO	0x05
-#define CISTPL_FUNCID_NETWORK	0x06
-#define CISTPL_FUNCID_AIMS	0x07
-#define CISTPL_FUNCID_SCSI	0x08
-
-#define CISTPL_SYSINIT_POST	0x01
-#define CISTPL_SYSINIT_ROM	0x02
-
-typedef struct cistpl_funcid_t {
-    u_char	func;
-    u_char	sysinit;
-} cistpl_funcid_t;
-
-typedef struct cistpl_funce_t {
-    u_char	type;
-    u_char	data[0];
-} cistpl_funce_t;
-
-/*======================================================================
-
-    Modem Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_FUNCE_SERIAL_IF		0x00
-#define CISTPL_FUNCE_SERIAL_CAP		0x01
-#define CISTPL_FUNCE_SERIAL_SERV_DATA	0x02
-#define CISTPL_FUNCE_SERIAL_SERV_FAX	0x03
-#define CISTPL_FUNCE_SERIAL_SERV_VOICE	0x04
-#define CISTPL_FUNCE_SERIAL_CAP_DATA	0x05
-#define CISTPL_FUNCE_SERIAL_CAP_FAX	0x06
-#define CISTPL_FUNCE_SERIAL_CAP_VOICE	0x07
-#define CISTPL_FUNCE_SERIAL_IF_DATA	0x08
-#define CISTPL_FUNCE_SERIAL_IF_FAX	0x09
-#define CISTPL_FUNCE_SERIAL_IF_VOICE	0x0a
-
-/* UART identification */
-#define CISTPL_SERIAL_UART_8250		0x00
-#define CISTPL_SERIAL_UART_16450	0x01
-#define CISTPL_SERIAL_UART_16550	0x02
-#define CISTPL_SERIAL_UART_8251		0x03
-#define CISTPL_SERIAL_UART_8530		0x04
-#define CISTPL_SERIAL_UART_85230	0x05
-
-/* UART capabilities */
-#define CISTPL_SERIAL_UART_SPACE	0x01
-#define CISTPL_SERIAL_UART_MARK		0x02
-#define CISTPL_SERIAL_UART_ODD		0x04
-#define CISTPL_SERIAL_UART_EVEN		0x08
-#define CISTPL_SERIAL_UART_5BIT		0x01
-#define CISTPL_SERIAL_UART_6BIT		0x02
-#define CISTPL_SERIAL_UART_7BIT		0x04
-#define CISTPL_SERIAL_UART_8BIT		0x08
-#define CISTPL_SERIAL_UART_1STOP	0x10
-#define CISTPL_SERIAL_UART_MSTOP	0x20
-#define CISTPL_SERIAL_UART_2STOP	0x40
-
-typedef struct cistpl_serial_t {
-    u_char	uart_type;
-    u_char	uart_cap_0;
-    u_char	uart_cap_1;
-} cistpl_serial_t;
-
-typedef struct cistpl_modem_cap_t {
-    u_char	flow;
-    u_char	cmd_buf;
-    u_char	rcv_buf_0, rcv_buf_1, rcv_buf_2;
-    u_char	xmit_buf_0, xmit_buf_1, xmit_buf_2;
-} cistpl_modem_cap_t;
-
-#define CISTPL_SERIAL_MOD_103		0x01
-#define CISTPL_SERIAL_MOD_V21		0x02
-#define CISTPL_SERIAL_MOD_V23		0x04
-#define CISTPL_SERIAL_MOD_V22		0x08
-#define CISTPL_SERIAL_MOD_212A		0x10
-#define CISTPL_SERIAL_MOD_V22BIS	0x20
-#define CISTPL_SERIAL_MOD_V26		0x40
-#define CISTPL_SERIAL_MOD_V26BIS	0x80
-#define CISTPL_SERIAL_MOD_V27BIS	0x01
-#define CISTPL_SERIAL_MOD_V29		0x02
-#define CISTPL_SERIAL_MOD_V32		0x04
-#define CISTPL_SERIAL_MOD_V32BIS	0x08
-#define CISTPL_SERIAL_MOD_V34		0x10
-
-#define CISTPL_SERIAL_ERR_MNP2_4	0x01
-#define CISTPL_SERIAL_ERR_V42_LAPM	0x02
-
-#define CISTPL_SERIAL_CMPR_V42BIS	0x01
-#define CISTPL_SERIAL_CMPR_MNP5		0x02
-
-#define CISTPL_SERIAL_CMD_AT1		0x01
-#define CISTPL_SERIAL_CMD_AT2		0x02
-#define CISTPL_SERIAL_CMD_AT3		0x04
-#define CISTPL_SERIAL_CMD_MNP_AT	0x08
-#define CISTPL_SERIAL_CMD_V25BIS	0x10
-#define CISTPL_SERIAL_CMD_V25A		0x20
-#define CISTPL_SERIAL_CMD_DMCL		0x40
-
-typedef struct cistpl_data_serv_t {
-    u_char	max_data_0;
-    u_char	max_data_1;
-    u_char	modulation_0;
-    u_char	modulation_1;
-    u_char	error_control;
-    u_char	compression;
-    u_char	cmd_protocol;
-    u_char	escape;
-    u_char	encrypt;
-    u_char	misc_features;
-    u_char	ccitt_code[0];
-} cistpl_data_serv_t;
-
-typedef struct cistpl_fax_serv_t {
-    u_char	max_data_0;
-    u_char	max_data_1;
-    u_char	modulation;
-    u_char	encrypt;
-    u_char	features_0;
-    u_char	features_1;
-    u_char	ccitt_code[0];
-} cistpl_fax_serv_t;
-
-typedef struct cistpl_voice_serv_t {
-    u_char	max_data_0;
-    u_char	max_data_1;
-} cistpl_voice_serv_t;
-
-/*======================================================================
-
-    LAN Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_FUNCE_LAN_TECH		0x01
-#define CISTPL_FUNCE_LAN_SPEED		0x02
-#define CISTPL_FUNCE_LAN_MEDIA		0x03
-#define CISTPL_FUNCE_LAN_NODE_ID	0x04
-#define CISTPL_FUNCE_LAN_CONNECTOR	0x05
-
-/* LAN technologies */
-#define CISTPL_LAN_TECH_ARCNET		0x01
-#define CISTPL_LAN_TECH_ETHERNET	0x02
-#define CISTPL_LAN_TECH_TOKENRING	0x03
-#define CISTPL_LAN_TECH_LOCALTALK	0x04
-#define CISTPL_LAN_TECH_FDDI		0x05
-#define CISTPL_LAN_TECH_ATM		0x06
-#define CISTPL_LAN_TECH_WIRELESS	0x07
-
-typedef struct cistpl_lan_tech_t {
-    u_char	tech;
-} cistpl_lan_tech_t;
-
-typedef struct cistpl_lan_speed_t {
-    u_int	speed;
-} cistpl_lan_speed_t;
-
-/* LAN media definitions */
-#define CISTPL_LAN_MEDIA_UTP		0x01
-#define CISTPL_LAN_MEDIA_STP		0x02
-#define CISTPL_LAN_MEDIA_THIN_COAX	0x03
-#define CISTPL_LAN_MEDIA_THICK_COAX	0x04
-#define CISTPL_LAN_MEDIA_FIBER		0x05
-#define CISTPL_LAN_MEDIA_900MHZ		0x06
-#define CISTPL_LAN_MEDIA_2GHZ		0x07
-#define CISTPL_LAN_MEDIA_5GHZ		0x08
-#define CISTPL_LAN_MEDIA_DIFF_IR	0x09
-#define CISTPL_LAN_MEDIA_PTP_IR		0x0a
-
-typedef struct cistpl_lan_media_t {
-    u_char	media;
-} cistpl_lan_media_t;
-
-typedef struct cistpl_lan_node_id_t {
-    u_char	nb;
-    u_char	id[16];
-} cistpl_lan_node_id_t;
-
-typedef struct cistpl_lan_connector_t {
-    u_char	code;
-} cistpl_lan_connector_t;
-
-/*======================================================================
-
-    IDE Function Extension Tuples
-
-======================================================================*/
-
-#define CISTPL_IDE_INTERFACE		0x01
-
-typedef struct cistpl_ide_interface_t {
-    u_char	interface;
-} cistpl_ide_interface_t;
-
-/* First feature byte */
-#define CISTPL_IDE_SILICON		0x04
-#define CISTPL_IDE_UNIQUE		0x08
-#define CISTPL_IDE_DUAL			0x10
-
-/* Second feature byte */
-#define CISTPL_IDE_HAS_SLEEP		0x01
-#define CISTPL_IDE_HAS_STANDBY		0x02
-#define CISTPL_IDE_HAS_IDLE		0x04
-#define CISTPL_IDE_LOW_POWER		0x08
-#define CISTPL_IDE_REG_INHIBIT		0x10
-#define CISTPL_IDE_HAS_INDEX		0x20
-#define CISTPL_IDE_IOIS16		0x40
-
-typedef struct cistpl_ide_feature_t {
-    u_char	feature1;
-    u_char	feature2;
-} cistpl_ide_feature_t;
-
-#define CISTPL_FUNCE_IDE_IFACE		0x01
-#define CISTPL_FUNCE_IDE_MASTER		0x02
-#define CISTPL_FUNCE_IDE_SLAVE		0x03
-
-/*======================================================================
-
-    Configuration Table Entries
-
-======================================================================*/
-
-#define CISTPL_BAR_SPACE	0x07
-#define CISTPL_BAR_SPACE_IO	0x10
-#define CISTPL_BAR_PREFETCH	0x20
-#define CISTPL_BAR_CACHEABLE	0x40
-#define CISTPL_BAR_1MEG_MAP	0x80
-
-typedef struct cistpl_bar_t {
-    u_char	attr;
-    u_int	size;
-} cistpl_bar_t;
-
-typedef struct cistpl_config_t {
-    u_char	last_idx;
-    u_int	base;
-    u_int	rmask[4];
-    u_char	subtuples;
-} cistpl_config_t;
-
-/* These are bits in the 'present' field, and indices in 'param' */
-#define CISTPL_POWER_VNOM	0
-#define CISTPL_POWER_VMIN	1
-#define CISTPL_POWER_VMAX	2
-#define CISTPL_POWER_ISTATIC	3
-#define CISTPL_POWER_IAVG	4
-#define CISTPL_POWER_IPEAK	5
-#define CISTPL_POWER_IDOWN	6
-
-#define CISTPL_POWER_HIGHZ_OK	0x01
-#define CISTPL_POWER_HIGHZ_REQ	0x02
-
-typedef struct cistpl_power_t {
-    u_char	present;
-    u_char	flags;
-    u_int	param[7];
-} cistpl_power_t;
-
-typedef struct cistpl_timing_t {
-    u_int	wait, waitscale;
-    u_int	ready, rdyscale;
-    u_int	reserved, rsvscale;
-} cistpl_timing_t;
-
-#define CISTPL_IO_LINES_MASK	0x1f
-#define CISTPL_IO_8BIT		0x20
-#define CISTPL_IO_16BIT		0x40
-#define CISTPL_IO_RANGE		0x80
-
-#define CISTPL_IO_MAX_WIN	16
-
-typedef struct cistpl_io_t {
-    u_char	flags;
-    u_char	nwin;
-    struct {
-	u_int	base;
-	u_int	len;
-    } win[CISTPL_IO_MAX_WIN];
-} cistpl_io_t;
-
-typedef struct cistpl_irq_t {
-    u_int	IRQInfo1;
-    u_int	IRQInfo2;
-} cistpl_irq_t;
-
-#define CISTPL_MEM_MAX_WIN	8
-
-typedef struct cistpl_mem_t {
-    u_char	flags;
-    u_char	nwin;
-    struct {
-	u_int	len;
-	u_int	card_addr;
-	u_int	host_addr;
-    } win[CISTPL_MEM_MAX_WIN];
-} cistpl_mem_t;
-
-#define CISTPL_CFTABLE_DEFAULT		0x0001
-#define CISTPL_CFTABLE_BVDS		0x0002
-#define CISTPL_CFTABLE_WP		0x0004
-#define CISTPL_CFTABLE_RDYBSY		0x0008
-#define CISTPL_CFTABLE_MWAIT		0x0010
-#define CISTPL_CFTABLE_AUDIO		0x0800
-#define CISTPL_CFTABLE_READONLY		0x1000
-#define CISTPL_CFTABLE_PWRDOWN		0x2000
-
-typedef struct cistpl_cftable_entry_t {
-    u_char		index;
-    u_short		flags;
-    u_char		interface;
-    cistpl_power_t	vcc, vpp1, vpp2;
-    cistpl_timing_t	timing;
-    cistpl_io_t		io;
-    cistpl_irq_t	irq;
-    cistpl_mem_t	mem;
-    u_char		subtuples;
-} cistpl_cftable_entry_t;
-
-#define CISTPL_CFTABLE_MASTER		0x000100
-#define CISTPL_CFTABLE_INVALIDATE	0x000200
-#define CISTPL_CFTABLE_VGA_PALETTE	0x000400
-#define CISTPL_CFTABLE_PARITY		0x000800
-#define CISTPL_CFTABLE_WAIT		0x001000
-#define CISTPL_CFTABLE_SERR		0x002000
-#define CISTPL_CFTABLE_FAST_BACK	0x004000
-#define CISTPL_CFTABLE_BINARY_AUDIO	0x010000
-#define CISTPL_CFTABLE_PWM_AUDIO	0x020000
-
-typedef struct cistpl_cftable_entry_cb_t {
-    u_char		index;
-    u_int		flags;
-    cistpl_power_t	vcc, vpp1, vpp2;
-    u_char		io;
-    cistpl_irq_t	irq;
-    u_char		mem;
-    u_char		subtuples;
-} cistpl_cftable_entry_cb_t;
-
-typedef struct cistpl_device_geo_t {
-    u_char		ngeo;
-    struct {
-	u_char		buswidth;
-	u_int		erase_block;
-	u_int		read_block;
-	u_int		write_block;
-	u_int		partition;
-	u_int		interleave;
-    } geo[CISTPL_MAX_DEVICES];
-} cistpl_device_geo_t;
-
-typedef struct cistpl_vers_2_t {
-    u_char	vers;
-    u_char	comply;
-    u_short	dindex;
-    u_char	vspec8, vspec9;
-    u_char	nhdr;
-    u_char	vendor, info;
-    char	str[244];
-} cistpl_vers_2_t;
-
-typedef struct cistpl_org_t {
-    u_char	data_org;
-    char	desc[30];
-} cistpl_org_t;
-
-#define CISTPL_ORG_FS		0x00
-#define CISTPL_ORG_APPSPEC	0x01
-#define CISTPL_ORG_XIP		0x02
-
-typedef struct cistpl_format_t {
-    u_char	type;
-    u_char	edc;
-    u_int	offset;
-    u_int	length;
-} cistpl_format_t;
-
-#define CISTPL_FORMAT_DISK	0x00
-#define CISTPL_FORMAT_MEM	0x01
-
-#define CISTPL_EDC_NONE		0x00
-#define CISTPL_EDC_CKSUM	0x01
-#define CISTPL_EDC_CRC		0x02
-#define CISTPL_EDC_PCC		0x03
-
-typedef union cisparse_t {
-    cistpl_device_t		device;
-    cistpl_checksum_t		checksum;
-    cistpl_longlink_t		longlink;
-    cistpl_longlink_mfc_t	longlink_mfc;
-    cistpl_vers_1_t		version_1;
-    cistpl_altstr_t		altstr;
-    cistpl_jedec_t		jedec;
-    cistpl_manfid_t		manfid;
-    cistpl_funcid_t		funcid;
-    cistpl_funce_t		funce;
-    cistpl_bar_t		bar;
-    cistpl_config_t		config;
-    cistpl_cftable_entry_t	cftable_entry;
-    cistpl_cftable_entry_cb_t	cftable_entry_cb;
-    cistpl_device_geo_t		device_geo;
-    cistpl_vers_2_t		vers_2;
-    cistpl_org_t		org;
-    cistpl_format_t		format;
-} cisparse_t;
-
-typedef struct tuple_t {
-    u_int	Attributes;
-    cisdata_t 	DesiredTuple;
-    u_int	Flags;		/* internal use */
-    u_int	LinkOffset;	/* internal use */
-    u_int	CISOffset;	/* internal use */
-    cisdata_t	TupleCode;
-    cisdata_t	TupleLink;
-    cisdata_t	TupleOffset;
-    cisdata_t	TupleDataMax;
-    cisdata_t	TupleDataLen;
-    cisdata_t	*TupleData;
-} tuple_t;
-
-/* Special cisdata_t value */
-#define RETURN_FIRST_TUPLE	0xff
-
-/* Attributes for tuple calls */
-#define TUPLE_RETURN_LINK	0x01
-#define TUPLE_RETURN_COMMON	0x02
-
-/* For ValidateCIS */
-typedef struct cisinfo_t {
-    u_int	Chains;
-} cisinfo_t;
-
-#define CISTPL_MAX_CIS_SIZE	0x200
-
-/* For ReplaceCIS */
-typedef struct cisdump_t {
-    u_int	Length;
-    cisdata_t	Data[CISTPL_MAX_CIS_SIZE];
-} cisdump_t;
-
-#endif /* LINUX_CISTPL_H */
diff --git a/mdk-stage1/pcmcia_/cs.h b/mdk-stage1/pcmcia_/cs.h
deleted file mode 100644
index 9abeac216..000000000
--- a/mdk-stage1/pcmcia_/cs.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * cs.h 1.73 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CS_H
-#define _LINUX_CS_H
-
-/* For AccessConfigurationRegister */
-typedef struct conf_reg_t {
-    u_char	Function;
-    u_int	Action;
-    off_t	Offset;
-    u_int	Value;
-} conf_reg_t;
-
-/* Actions */
-#define CS_READ		1
-#define CS_WRITE	2
-
-/* for AdjustResourceInfo */
-typedef struct adjust_t {
-    u_int	Action;
-    u_int	Resource;
-    u_int	Attributes;
-    union {
-	struct memory {
-	    unsigned long	Base;
-	    unsigned long	Size;
-	} memory;
-	struct io {
-	    ioaddr_t	BasePort;
-	    ioaddr_t	NumPorts;
-	    u_int	IOAddrLines;
-	} io;
-	struct irq {
-	    u_int	IRQ;
-	} irq;
-    } resource;
-} adjust_t;
-
-/* Action field */
-#define REMOVE_MANAGED_RESOURCE		1
-#define ADD_MANAGED_RESOURCE		2
-#define GET_FIRST_MANAGED_RESOURCE	3
-#define GET_NEXT_MANAGED_RESOURCE	4
-/* Resource field */
-#define RES_MEMORY_RANGE		1
-#define RES_IO_RANGE			2
-#define RES_IRQ				3
-/* Attribute field */
-#define RES_IRQ_TYPE			0x03
-#define RES_IRQ_TYPE_EXCLUSIVE		0
-#define RES_IRQ_TYPE_TIME		1
-#define RES_IRQ_TYPE_DYNAMIC		2
-#define RES_IRQ_CSC			0x04
-#define RES_SHARED			0x08
-#define RES_RESERVED			0x10
-#define RES_ALLOCATED			0x20
-#define RES_REMOVED			0x40
-
-typedef struct servinfo_t {
-    char	Signature[2];
-    u_int	Count;
-    u_int	Revision;
-    u_int	CSLevel;
-    char	*VendorString;
-} servinfo_t;
-
-typedef struct event_callback_args_t {
-    client_handle_t client_handle;
-    void	*info;
-    void	*mtdrequest;
-    void	*buffer;
-    void	*misc;
-    void	*client_data;
-    struct bus_operations *bus;
-} event_callback_args_t;
-
-/* for GetConfigurationInfo */
-typedef struct config_info_t {
-    u_char	Function;
-    u_int	Attributes;
-    u_int	Vcc, Vpp1, Vpp2;
-    u_int	IntType;
-    u_int	ConfigBase;
-    u_char	Status, Pin, Copy, Option, ExtStatus;
-    u_int	Present;
-    u_int	CardValues;
-    u_int	AssignedIRQ;
-    u_int	IRQAttributes;
-    ioaddr_t	BasePort1;
-    ioaddr_t	NumPorts1;
-    u_int	Attributes1;
-    ioaddr_t	BasePort2;
-    ioaddr_t	NumPorts2;
-    u_int	Attributes2;
-    u_int	IOAddrLines;
-} config_info_t;
-
-/* For CardValues field */
-#define CV_OPTION_VALUE		0x01
-#define CV_STATUS_VALUE		0x02
-#define CV_PIN_REPLACEMENT	0x04
-#define CV_COPY_VALUE		0x08
-#define CV_EXT_STATUS		0x10
-
-/* For GetFirst/NextClient */
-typedef struct client_req_t {
-    socket_t	Socket;
-    u_int	Attributes;
-} client_req_t;
-
-#define CLIENT_THIS_SOCKET	0x01
-
-/* For RegisterClient */
-typedef struct client_reg_t {
-    dev_info_t	*dev_info;
-    u_int	Attributes;
-    u_int	EventMask;
-    int		(*event_handler)(event_t event, int priority,
-				 event_callback_args_t *);
-    event_callback_args_t event_callback_args;
-    u_int	Version;
-} client_reg_t;
-
-/* ModifyConfiguration */
-typedef struct modconf_t {
-    u_int	Attributes;
-    u_int	Vcc, Vpp1, Vpp2;
-} modconf_t;
-
-/* Attributes for ModifyConfiguration */
-#define CONF_IRQ_CHANGE_VALID	0x100
-#define CONF_VCC_CHANGE_VALID	0x200
-#define CONF_VPP1_CHANGE_VALID	0x400
-#define CONF_VPP2_CHANGE_VALID	0x800
-
-/* For RequestConfiguration */
-typedef struct config_req_t {
-    u_int	Attributes;
-    u_int	Vcc, Vpp1, Vpp2;
-    u_int	IntType;
-    u_int	ConfigBase;
-    u_char	Status, Pin, Copy, ExtStatus;
-    u_char	ConfigIndex;
-    u_int	Present;
-} config_req_t;
-
-/* Attributes for RequestConfiguration */
-#define CONF_ENABLE_IRQ		0x01
-#define CONF_ENABLE_DMA		0x02
-#define CONF_ENABLE_SPKR	0x04
-#define CONF_VALID_CLIENT	0x100
-
-/* IntType field */
-#define INT_MEMORY		0x01
-#define INT_MEMORY_AND_IO	0x02
-#define INT_CARDBUS		0x04
-#define INT_ZOOMED_VIDEO	0x08
-
-/* For RequestIO and ReleaseIO */
-typedef struct io_req_t {
-    ioaddr_t	BasePort1;
-    ioaddr_t	NumPorts1;
-    u_int	Attributes1;
-    ioaddr_t	BasePort2;
-    ioaddr_t	NumPorts2;
-    u_int	Attributes2;
-    u_int	IOAddrLines;
-} io_req_t;
-
-/* Attributes for RequestIO and ReleaseIO */
-#define IO_SHARED		0x01
-#define IO_FIRST_SHARED		0x02
-#define IO_FORCE_ALIAS_ACCESS	0x04
-#define IO_DATA_PATH_WIDTH	0x18
-#define IO_DATA_PATH_WIDTH_8	0x00
-#define IO_DATA_PATH_WIDTH_16	0x08
-#define IO_DATA_PATH_WIDTH_AUTO	0x10
-
-/* For RequestIRQ and ReleaseIRQ */
-typedef struct irq_req_t {
-    u_int	Attributes;
-    u_int	AssignedIRQ;
-    u_int	IRQInfo1, IRQInfo2;
-    void	*Handler;
-    void	*Instance;
-} irq_req_t;
-
-/* Attributes for RequestIRQ and ReleaseIRQ */
-#define IRQ_TYPE			0x03
-#define IRQ_TYPE_EXCLUSIVE		0x00
-#define IRQ_TYPE_TIME			0x01
-#define IRQ_TYPE_DYNAMIC_SHARING	0x02
-#define IRQ_FORCED_PULSE		0x04
-#define IRQ_FIRST_SHARED		0x08
-#define IRQ_HANDLE_PRESENT		0x10
-#define IRQ_PULSE_ALLOCATED		0x100
-
-/* Bits in IRQInfo1 field */
-#define IRQ_MASK		0x0f
-#define IRQ_NMI_ID		0x01
-#define IRQ_IOCK_ID		0x02
-#define IRQ_BERR_ID		0x04
-#define IRQ_VEND_ID		0x08
-#define IRQ_INFO2_VALID		0x10
-#define IRQ_LEVEL_ID		0x20
-#define IRQ_PULSE_ID		0x40
-#define IRQ_SHARE_ID		0x80
-
-typedef struct eventmask_t {
-    u_int	Attributes;
-    u_int	EventMask;
-} eventmask_t;
-
-#define CONF_EVENT_MASK_VALID	0x01
-
-/* Configuration registers present */
-#define PRESENT_OPTION		0x001
-#define PRESENT_STATUS		0x002
-#define PRESENT_PIN_REPLACE	0x004
-#define PRESENT_COPY		0x008
-#define PRESENT_EXT_STATUS	0x010
-#define PRESENT_IOBASE_0	0x020
-#define PRESENT_IOBASE_1	0x040
-#define PRESENT_IOBASE_2	0x080
-#define PRESENT_IOBASE_3	0x100
-#define PRESENT_IOSIZE		0x200
-
-/* For GetMemPage, MapMemPage */
-typedef struct memreq_t {
-    u_int	CardOffset;
-    page_t	Page;
-} memreq_t;
-
-/* For ModifyWindow */
-typedef struct modwin_t {
-    u_int	Attributes;
-    u_int	AccessSpeed;
-} modwin_t;
-
-/* For RequestWindow */
-typedef struct win_req_t {
-    u_int	Attributes;
-    unsigned long	Base;
-    u_int	Size;
-    u_int	AccessSpeed;
-} win_req_t;
-
-/* Attributes for RequestWindow */
-#define WIN_ADDR_SPACE		0x0001
-#define WIN_ADDR_SPACE_MEM	0x0000
-#define WIN_ADDR_SPACE_IO	0x0001
-#define WIN_MEMORY_TYPE		0x0002
-#define WIN_MEMORY_TYPE_CM	0x0000
-#define WIN_MEMORY_TYPE_AM	0x0002
-#define WIN_ENABLE		0x0004
-#define WIN_DATA_WIDTH		0x0018
-#define WIN_DATA_WIDTH_8	0x0000
-#define WIN_DATA_WIDTH_16	0x0008
-#define WIN_DATA_WIDTH_32	0x0010
-#define WIN_PAGED		0x0020
-#define WIN_SHARED		0x0040
-#define WIN_FIRST_SHARED	0x0080
-#define WIN_USE_WAIT		0x0100
-#define WIN_STRICT_ALIGN	0x0200
-#define WIN_MAP_BELOW_1MB	0x0400
-#define WIN_PREFETCH		0x0800
-#define WIN_CACHEABLE		0x1000
-#define WIN_BAR_MASK		0xe000
-#define WIN_BAR_SHIFT		13
-
-/* Attributes for RegisterClient */
-#define INFO_MASTER_CLIENT	0x01
-#define INFO_IO_CLIENT		0x02
-#define INFO_MTD_CLIENT		0x04
-#define INFO_MEM_CLIENT		0x08
-#define MAX_NUM_CLIENTS		3
-
-#define INFO_CARD_SHARE		0x10
-#define INFO_CARD_EXCL		0x20
-
-typedef struct cs_status_t {
-    u_char	Function;
-    event_t 	CardState;
-    event_t	SocketState;
-} cs_status_t;
-
-typedef struct error_info_t {
-    int		func;
-    int		retcode;
-} error_info_t;
-
-/* Special stuff for binding drivers to sockets */
-typedef struct bind_req_t {
-    socket_t	Socket;
-    u_char	Function;
-    dev_info_t	*dev_info;
-} bind_req_t;
-
-/* Flag to bind to all functions */
-#define BIND_FN_ALL	0xff
-
-typedef struct mtd_bind_t {
-    socket_t	Socket;
-    u_int	Attributes;
-    u_int	CardOffset;
-    dev_info_t	*dev_info;
-} mtd_bind_t;
-
-/* Events */
-#define CS_EVENT_PRI_LOW		0
-#define CS_EVENT_PRI_HIGH		1
-
-#define CS_EVENT_WRITE_PROTECT		0x000001
-#define CS_EVENT_CARD_LOCK		0x000002
-#define CS_EVENT_CARD_INSERTION		0x000004
-#define CS_EVENT_CARD_REMOVAL		0x000008
-#define CS_EVENT_BATTERY_DEAD		0x000010
-#define CS_EVENT_BATTERY_LOW		0x000020
-#define CS_EVENT_READY_CHANGE		0x000040
-#define CS_EVENT_CARD_DETECT		0x000080
-#define CS_EVENT_RESET_REQUEST		0x000100
-#define CS_EVENT_RESET_PHYSICAL		0x000200
-#define CS_EVENT_CARD_RESET		0x000400
-#define CS_EVENT_REGISTRATION_COMPLETE	0x000800
-#define CS_EVENT_RESET_COMPLETE		0x001000
-#define CS_EVENT_PM_SUSPEND		0x002000
-#define CS_EVENT_PM_RESUME		0x004000
-#define CS_EVENT_INSERTION_REQUEST	0x008000
-#define CS_EVENT_EJECTION_REQUEST	0x010000
-#define CS_EVENT_MTD_REQUEST		0x020000
-#define CS_EVENT_ERASE_COMPLETE		0x040000
-#define CS_EVENT_REQUEST_ATTENTION	0x080000
-#define CS_EVENT_CB_DETECT		0x100000
-#define CS_EVENT_3VCARD			0x200000
-#define CS_EVENT_XVCARD			0x400000
-
-/* Return codes */
-#define CS_SUCCESS		0x00
-#define CS_BAD_ADAPTER		0x01
-#define CS_BAD_ATTRIBUTE	0x02
-#define CS_BAD_BASE		0x03
-#define CS_BAD_EDC		0x04
-#define CS_BAD_IRQ		0x06
-#define CS_BAD_OFFSET		0x07
-#define CS_BAD_PAGE		0x08
-#define CS_READ_FAILURE		0x09
-#define CS_BAD_SIZE		0x0a
-#define CS_BAD_SOCKET		0x0b
-#define CS_BAD_TYPE		0x0d
-#define CS_BAD_VCC		0x0e
-#define CS_BAD_VPP		0x0f
-#define CS_BAD_WINDOW		0x11
-#define CS_WRITE_FAILURE	0x12
-#define CS_NO_CARD		0x14
-#define CS_UNSUPPORTED_FUNCTION	0x15
-#define CS_UNSUPPORTED_MODE	0x16
-#define CS_BAD_SPEED		0x17
-#define CS_BUSY			0x18
-#define CS_GENERAL_FAILURE	0x19
-#define CS_WRITE_PROTECTED	0x1a
-#define CS_BAD_ARG_LENGTH	0x1b
-#define CS_BAD_ARGS		0x1c
-#define CS_CONFIGURATION_LOCKED	0x1d
-#define CS_IN_USE		0x1e
-#define CS_NO_MORE_ITEMS	0x1f
-#define CS_OUT_OF_RESOURCE	0x20
-#define CS_BAD_HANDLE		0x21
-
-#define CS_BAD_TUPLE		0x40
-
-#ifdef __KERNEL__
-
-/*
- *  The main Card Services entry point
- */
-
-enum service {
-    AccessConfigurationRegister, AddSocketServices,
-    AdjustResourceInfo, CheckEraseQueue, CloseMemory, CopyMemory,
-    DeregisterClient, DeregisterEraseQueue, GetCardServicesInfo,
-    GetClientInfo, GetConfigurationInfo, GetEventMask,
-    GetFirstClient, GetFirstPartion, GetFirstRegion, GetFirstTuple,
-    GetNextClient, GetNextPartition, GetNextRegion, GetNextTuple,
-    GetStatus, GetTupleData, MapLogSocket, MapLogWindow, MapMemPage,
-    MapPhySocket, MapPhyWindow, ModifyConfiguration, ModifyWindow,
-    OpenMemory, ParseTuple, ReadMemory, RegisterClient,
-    RegisterEraseQueue, RegisterMTD, RegisterTimer,
-    ReleaseConfiguration, ReleaseExclusive, ReleaseIO, ReleaseIRQ,
-    ReleaseSocketMask, ReleaseWindow, ReplaceSocketServices,
-    RequestConfiguration, RequestExclusive, RequestIO, RequestIRQ,
-    RequestSocketMask, RequestWindow, ResetCard, ReturnSSEntry,
-    SetEventMask, SetRegion, ValidateCIS, VendorSpecific,
-    WriteMemory, BindDevice, BindMTD, ReportError,
-    SuspendCard, ResumeCard, EjectCard, InsertCard, ReplaceCIS,
-    GetFirstWindow, GetNextWindow, GetMemPage
-};
-
-#ifdef IN_CARD_SERVICES
-extern int CardServices(int func, void *a1, void *a2, void *a3);
-#else
-extern int CardServices(int func, ...);
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_CS_H */
diff --git a/mdk-stage1/pcmcia_/cs_types.h b/mdk-stage1/pcmcia_/cs_types.h
deleted file mode 100644
index 4598d7f48..000000000
--- a/mdk-stage1/pcmcia_/cs_types.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * cs_types.h 1.19 2001/08/24 12:16:12
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CS_TYPES_H
-#define _LINUX_CS_TYPES_H
-
-#ifdef __linux__
-#ifdef __KERNEL__
-#include <linux/types.h>
-#else
-#include <sys/types.h>
-#endif
-#endif
-
-#ifdef __arm__
-typedef u_int   ioaddr_t;
-#else
-typedef u_short	ioaddr_t;
-#endif
-
-typedef u_short	socket_t;
-typedef u_int	event_t;
-typedef u_char	cisdata_t;
-typedef u_short	page_t;
-
-struct client_t;
-typedef struct client_t *client_handle_t;
-
-struct window_t;
-typedef struct window_t *window_handle_t;
-
-struct region_t;
-typedef struct region_t *memory_handle_t;
-
-struct eraseq_t;
-typedef struct eraseq_t *eraseq_handle_t;
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN 32
-#endif
-
-typedef char dev_info_t[DEV_NAME_LEN];
-
-#endif /* _LINUX_CS_TYPES_H */
diff --git a/mdk-stage1/pcmcia_/driver_ops.h b/mdk-stage1/pcmcia_/driver_ops.h
deleted file mode 100644
index 2f0a066d3..000000000
--- a/mdk-stage1/pcmcia_/driver_ops.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * driver_ops.h 1.16 2001/08/24 12:16:13
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_DRIVER_OPS_H
-#define _LINUX_DRIVER_OPS_H
-
-#ifndef DEV_NAME_LEN
-#define DEV_NAME_LEN	32
-#endif
-
-#ifdef __KERNEL__
-
-typedef struct dev_node_t {
-    char		dev_name[DEV_NAME_LEN];
-    u_short		major, minor;
-    struct dev_node_t	*next;
-} dev_node_t;
-
-typedef struct dev_locator_t {
-    enum { LOC_ISA, LOC_PCI } bus;
-    union {
-	struct {
-	    u_short	io_base_1, io_base_2;
-	    u_long	mem_base;
-	    u_char	irq, dma;
-	} isa;
-	struct {
-	    u_char	bus;
-	    u_char	devfn;
-	} pci;
-    } b;
-} dev_locator_t;
-
-typedef struct driver_operations {
-    char		*name;
-    dev_node_t		*(*attach) (dev_locator_t *loc);
-    void		(*suspend) (dev_node_t *dev);
-    void		(*resume) (dev_node_t *dev);
-    void		(*detach) (dev_node_t *dev);
-} driver_operations;
-
-int register_driver(struct driver_operations *ops);
-void unregister_driver(struct driver_operations *ops);
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_DRIVER_OPS_H */
diff --git a/mdk-stage1/pcmcia_/ds.h b/mdk-stage1/pcmcia_/ds.h
deleted file mode 100644
index 29db7b415..000000000
--- a/mdk-stage1/pcmcia_/ds.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * ds.h 1.57 2001/08/24 12:16:13
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_DS_H
-#define _LINUX_DS_H
-
-#include <pcmcia_/driver_ops.h>
-#include <pcmcia_/bulkmem.h>
-
-typedef struct tuple_parse_t {
-    tuple_t		tuple;
-    cisdata_t		data[255];
-    cisparse_t		parse;
-} tuple_parse_t;
-
-typedef struct win_info_t {
-    window_handle_t	handle;
-    win_req_t		window;
-    memreq_t		map;
-} win_info_t;
-    
-typedef struct bind_info_t {
-    dev_info_t		dev_info;
-    u_char		function;
-    struct dev_link_t	*instance;
-    char		name[DEV_NAME_LEN];
-    u_short		major, minor;
-    void		*next;
-} bind_info_t;
-
-typedef struct mtd_info_t {
-    dev_info_t		dev_info;
-    u_int		Attributes;
-    u_int		CardOffset;
-} mtd_info_t;
-
-typedef union ds_ioctl_arg_t {
-    servinfo_t		servinfo;
-    adjust_t		adjust;
-    config_info_t	config;
-    tuple_t		tuple;
-    tuple_parse_t	tuple_parse;
-    client_req_t	client_req;
-    cs_status_t		status;
-    conf_reg_t		conf_reg;
-    cisinfo_t		cisinfo;
-    region_info_t	region;
-    bind_info_t		bind_info;
-    mtd_info_t		mtd_info;
-    win_info_t		win_info;
-    cisdump_t		cisdump;
-} ds_ioctl_arg_t;
-
-#define DS_GET_CARD_SERVICES_INFO	_IOR ('d', 1, servinfo_t)
-#define DS_ADJUST_RESOURCE_INFO		_IOWR('d', 2, adjust_t)
-#define DS_GET_CONFIGURATION_INFO	_IOWR('d', 3, config_info_t)
-#define DS_GET_FIRST_TUPLE		_IOWR('d', 4, tuple_t)
-#define DS_GET_NEXT_TUPLE		_IOWR('d', 5, tuple_t)
-#define DS_GET_TUPLE_DATA		_IOWR('d', 6, tuple_parse_t)
-#define DS_PARSE_TUPLE			_IOWR('d', 7, tuple_parse_t)
-#define DS_RESET_CARD			_IO  ('d', 8)
-#define DS_GET_STATUS			_IOWR('d', 9, cs_status_t)
-#define DS_ACCESS_CONFIGURATION_REGISTER _IOWR('d', 10, conf_reg_t)
-#define DS_VALIDATE_CIS			_IOR ('d', 11, cisinfo_t)
-#define DS_SUSPEND_CARD			_IO  ('d', 12)
-#define DS_RESUME_CARD			_IO  ('d', 13)
-#define DS_EJECT_CARD			_IO  ('d', 14)
-#define DS_INSERT_CARD			_IO  ('d', 15)
-#define DS_GET_FIRST_REGION		_IOWR('d', 16, region_info_t)
-#define DS_GET_NEXT_REGION		_IOWR('d', 17, region_info_t)
-#define DS_REPLACE_CIS			_IOWR('d', 18, cisdump_t)
-#define DS_GET_FIRST_WINDOW		_IOR ('d', 19, win_info_t)
-#define DS_GET_NEXT_WINDOW		_IOWR('d', 20, win_info_t)
-#define DS_GET_MEM_PAGE			_IOWR('d', 21, win_info_t)
-
-#define DS_BIND_REQUEST			_IOWR('d', 60, bind_info_t)
-#define DS_GET_DEVICE_INFO		_IOWR('d', 61, bind_info_t) 
-#define DS_GET_NEXT_DEVICE		_IOWR('d', 62, bind_info_t) 
-#define DS_UNBIND_REQUEST		_IOW ('d', 63, bind_info_t)
-#define DS_BIND_MTD			_IOWR('d', 64, mtd_info_t)
-
-#ifdef __KERNEL__
-
-typedef struct dev_link_t {
-    dev_node_t		*dev;
-    u_int		state, open;
-    wait_queue_head_t	pending;
-    struct timer_list	release;
-    client_handle_t	handle;
-    io_req_t		io;
-    irq_req_t		irq;
-    config_req_t	conf;
-    window_handle_t	win;
-    void		*priv;
-    struct dev_link_t	*next;
-} dev_link_t;
-
-/* Flags for device state */
-#define DEV_PRESENT		0x01
-#define DEV_CONFIG		0x02
-#define DEV_STALE_CONFIG	0x04	/* release on close */
-#define DEV_STALE_LINK		0x08	/* detach on release */
-#define DEV_CONFIG_PENDING	0x10
-#define DEV_RELEASE_PENDING	0x20
-#define DEV_SUSPEND		0x40
-#define DEV_BUSY		0x80
-
-#define DEV_OK(l) \
-    ((l) && ((l->state & ~DEV_BUSY) == (DEV_CONFIG|DEV_PRESENT)))
-
-int register_pccard_driver(dev_info_t *dev_info,
-			   dev_link_t *(*attach)(void),
-			   void (*detach)(dev_link_t *));
-
-int unregister_pccard_driver(dev_info_t *dev_info);
-
-#define register_pcmcia_driver register_pccard_driver
-#define unregister_pcmcia_driver unregister_pccard_driver
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_DS_H */
diff --git a/mdk-stage1/pcmcia_/i82365.h b/mdk-stage1/pcmcia_/i82365.h
deleted file mode 100644
index 38ff167fb..000000000
--- a/mdk-stage1/pcmcia_/i82365.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * i82365.h 1.21 2001/08/24 12:15:33
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_I82365_H
-#define _LINUX_I82365_H
-
-/* register definitions for the Intel 82365SL PCMCIA controller */
-
-/* Offsets for PCIC registers */
-#define I365_IDENT	0x00	/* Identification and revision */
-#define I365_STATUS	0x01	/* Interface status */
-#define I365_POWER	0x02	/* Power and RESETDRV control */
-#define I365_INTCTL	0x03	/* Interrupt and general control */
-#define I365_CSC	0x04	/* Card status change */
-#define I365_CSCINT	0x05	/* Card status change interrupt control */
-#define I365_ADDRWIN	0x06	/* Address window enable */
-#define I365_IOCTL	0x07	/* I/O control */
-#define I365_GENCTL	0x16	/* Card detect and general control */
-#define I365_GBLCTL	0x1E	/* Global control register */
-
-/* Offsets for I/O and memory window registers */
-#define I365_IO(map)	(0x08+((map)<<2))
-#define I365_MEM(map)	(0x10+((map)<<3))
-#define I365_W_START	0
-#define I365_W_STOP	2
-#define I365_W_OFF	4
-
-/* Flags for I365_STATUS */
-#define I365_CS_BVD1	0x01
-#define I365_CS_STSCHG	0x01
-#define I365_CS_BVD2	0x02
-#define I365_CS_SPKR	0x02
-#define I365_CS_DETECT	0x0C
-#define I365_CS_WRPROT	0x10
-#define I365_CS_READY	0x20	/* Inverted */
-#define I365_CS_POWERON	0x40
-#define I365_CS_GPI	0x80
-
-/* Flags for I365_POWER */
-#define I365_PWR_OFF	0x00	/* Turn off the socket */
-#define I365_PWR_OUT	0x80	/* Output enable */
-#define I365_PWR_NORESET 0x40	/* Disable RESETDRV on resume */
-#define I365_PWR_AUTO	0x20	/* Auto pwr switch enable */
-#define I365_VCC_MASK	0x18	/* Mask for turning off Vcc */
-/* There are different layouts for B-step and DF-step chips: the B
-   step has independent Vpp1/Vpp2 control, and the DF step has only
-   Vpp1 control, plus 3V control */
-#define I365_VCC_5V	0x10	/* Vcc = 5.0v */
-#define I365_VCC_3V	0x18	/* Vcc = 3.3v */
-#define I365_VPP2_MASK	0x0c	/* Mask for turning off Vpp2 */
-#define I365_VPP2_5V	0x04	/* Vpp2 = 5.0v */
-#define I365_VPP2_12V	0x08	/* Vpp2 = 12.0v */
-#define I365_VPP1_MASK	0x03	/* Mask for turning off Vpp1 */
-#define I365_VPP1_5V	0x01	/* Vpp2 = 5.0v */
-#define I365_VPP1_12V	0x02	/* Vpp2 = 12.0v */
-
-/* Flags for I365_INTCTL */
-#define I365_RING_ENA	0x80
-#define I365_PC_RESET	0x40
-#define I365_PC_IOCARD	0x20
-#define I365_INTR_ENA	0x10
-#define I365_IRQ_MASK	0x0F
-
-/* Flags for I365_CSC and I365_CSCINT*/
-#define I365_CSC_BVD1	0x01
-#define I365_CSC_STSCHG	0x01
-#define I365_CSC_BVD2	0x02
-#define I365_CSC_READY	0x04
-#define I365_CSC_DETECT	0x08
-#define I365_CSC_ANY	0x0F
-#define I365_CSC_GPI	0x10
-
-/* Flags for I365_ADDRWIN */
-#define I365_ENA_IO(map)	(0x40 << (map))
-#define I365_ENA_MEM(map)	(0x01 << (map))
-
-/* Flags for I365_IOCTL */
-#define I365_IOCTL_MASK(map)	(0x0F << (map<<2))
-#define I365_IOCTL_WAIT(map)	(0x08 << (map<<2))
-#define I365_IOCTL_0WS(map)	(0x04 << (map<<2))
-#define I365_IOCTL_IOCS16(map)	(0x02 << (map<<2))
-#define I365_IOCTL_16BIT(map)	(0x01 << (map<<2))
-
-/* Flags for I365_GENCTL */
-#define I365_CTL_16DELAY	0x01
-#define I365_CTL_RESET		0x02
-#define I365_CTL_GPI_ENA	0x04
-#define I365_CTL_GPI_CTL	0x08
-#define I365_CTL_RESUME		0x10
-#define I365_CTL_SW_IRQ		0x20
-
-/* Flags for I365_GBLCTL */
-#define I365_GBL_PWRDOWN	0x01
-#define I365_GBL_CSC_LEV	0x02
-#define I365_GBL_WRBACK		0x04
-#define I365_GBL_IRQ_0_LEV	0x08
-#define I365_GBL_IRQ_1_LEV	0x10
-
-/* Flags for memory window registers */
-#define I365_MEM_16BIT	0x8000	/* In memory start high byte */
-#define I365_MEM_0WS	0x4000
-#define I365_MEM_WS1	0x8000	/* In memory stop high byte */
-#define I365_MEM_WS0	0x4000
-#define I365_MEM_WRPROT	0x8000	/* In offset high byte */
-#define I365_MEM_REG	0x4000
-
-#define I365_REG(slot, reg)	(((slot) << 6) + reg)
-
-#endif /* _LINUX_I82365_H */
diff --git a/mdk-stage1/pcmcia_/lex_config.c b/mdk-stage1/pcmcia_/lex_config.c
deleted file mode 100644
index 2f990618d..000000000
--- a/mdk-stage1/pcmcia_/lex_config.c
+++ /dev/null
@@ -1,2053 +0,0 @@
-/* A lexical scanner generated by flex */
-
-/* Scanner skeleton version:
- * $Header$
- */
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-
-#include <stdio.h>
-
-
-/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
-#ifdef c_plusplus
-#ifndef __cplusplus
-#define __cplusplus
-#endif
-#endif
-
-
-#ifdef __cplusplus
-
-#include <stdlib.h>
-#include <unistd.h>
-
-/* Use prototypes in function declarations. */
-#define YY_USE_PROTOS
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else	/* ! __cplusplus */
-
-#if __STDC__
-
-#define YY_USE_PROTOS
-#define YY_USE_CONST
-
-#endif	/* __STDC__ */
-#endif	/* ! __cplusplus */
-
-#ifdef __TURBOC__
- #pragma warn -rch
- #pragma warn -use
-#include <io.h>
-#include <stdlib.h>
-#define YY_USE_CONST
-#define YY_USE_PROTOS
-#endif
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-
-#ifdef YY_USE_PROTOS
-#define YY_PROTO(proto) proto
-#else
-#define YY_PROTO(proto) ()
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index.  If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition.  This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN yy_start = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state.  The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START ((yy_start - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE yyrestart( yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#define YY_BUF_SIZE 16384
-
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-
-extern int yyleng;
-extern FILE *yyin, *yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
-/* The funky do-while in the following #define is used to turn the definition
- * int a single C statement (which needs a semi-colon terminator).  This
- * avoids problems with code like:
- *
- * 	if ( condition_holds )
- *		yyless( 5 );
- *	else
- *		do_something_else();
- *
- * Prior to using the do-while the compiler would get upset at the
- * "else" because it interpreted the "if" statement as being all
- * done when it reached the ';' after the yyless() call.
- */
-
-/* Return all but the first 'n' matched characters back to the input stream. */
-
-#define yyless(n) \
-	do \
-		{ \
-		/* Undo effects of setting up yytext. */ \
-		*yy_cp = yy_hold_char; \
-		YY_RESTORE_YY_MORE_OFFSET \
-		yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
-		YY_DO_BEFORE_ACTION; /* set up yytext again */ \
-		} \
-	while ( 0 )
-
-//mdk-stage1// #define unput(c) yyunput( c, yytext_ptr )
-
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- */
-typedef unsigned int yy_size_t;
-
-
-struct yy_buffer_state
-	{
-	FILE *yy_input_file;
-
-	char *yy_ch_buf;		/* input buffer */
-	char *yy_buf_pos;		/* current position in input buffer */
-
-	/* Size of input buffer in bytes, not including room for EOB
-	 * characters.
-	 */
-	yy_size_t yy_buf_size;
-
-	/* Number of characters read into yy_ch_buf, not including EOB
-	 * characters.
-	 */
-	int yy_n_chars;
-
-	/* Whether we "own" the buffer - i.e., we know we created it,
-	 * and can realloc() it to grow it, and should free() it to
-	 * delete it.
-	 */
-	int yy_is_our_buffer;
-
-	/* Whether this is an "interactive" input source; if so, and
-	 * if we're using stdio for input, then we want to use getc()
-	 * instead of fread(), to make sure we stop fetching input after
-	 * each newline.
-	 */
-	int yy_is_interactive;
-
-	/* Whether we're considered to be at the beginning of a line.
-	 * If so, '^' rules will be active on the next match, otherwise
-	 * not.
-	 */
-	int yy_at_bol;
-
-	/* Whether to try to fill the input buffer when we reach the
-	 * end of it.
-	 */
-	int yy_fill_buffer;
-
-	int yy_buffer_status;
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
-	/* When an EOF's been seen but there's still some text to process
-	 * then we mark the buffer as YY_EOF_PENDING, to indicate that we
-	 * shouldn't try reading from the input source any more.  We might
-	 * still have a bunch of tokens to match, though, because of
-	 * possible backing-up.
-	 *
-	 * When we actually see the EOF, we change the status to "new"
-	 * (via yyrestart()), so that the user can continue scanning by
-	 * just pointing yyin at a new input file.
-	 */
-#define YY_BUFFER_EOF_PENDING 2
-	};
-
-static YY_BUFFER_STATE yy_current_buffer = 0;
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- */
-#define YY_CURRENT_BUFFER yy_current_buffer
-
-
-/* yy_hold_char holds the character lost when yytext is formed. */
-static char yy_hold_char;
-
-static int yy_n_chars;		/* number of characters read into yy_ch_buf */
-
-
-int yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 1;		/* whether we need to initialize */
-static int yy_start = 0;	/* start state number */
-
-/* Flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin.  A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void yyrestart YY_PROTO(( FILE *input_file ));
-
-void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
-void yy_load_buffer_state YY_PROTO(( void ));
-YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
-void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
-void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
-void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
-#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )
-
-YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
-YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
-YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));
-
-static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
-static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t ));
-static void yy_flex_free YY_PROTO(( void * ));
-
-#define yy_new_buffer yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
-	{ \
-	if ( ! yy_current_buffer ) \
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
-	yy_current_buffer->yy_is_interactive = is_interactive; \
-	}
-
-#define yy_set_bol(at_bol) \
-	{ \
-	if ( ! yy_current_buffer ) \
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
-	yy_current_buffer->yy_at_bol = at_bol; \
-	}
-
-#define YY_AT_BOL() (yy_current_buffer->yy_at_bol)
-
-typedef unsigned char YY_CHAR;
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-typedef int yy_state_type;
-extern char *yytext;
-#define yytext_ptr yytext
-
-static yy_state_type yy_get_previous_state YY_PROTO(( void ));
-static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
-static int yy_get_next_buffer YY_PROTO(( void ));
-static void yy_fatal_error YY_PROTO(( yyconst char msg[] ));
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
-#define YY_DO_BEFORE_ACTION \
-	yytext_ptr = yy_bp; \
-	yyleng = (int) (yy_cp - yy_bp); \
-	yy_hold_char = *yy_cp; \
-	*yy_cp = '\0'; \
-	yy_c_buf_p = yy_cp;
-
-#define YY_NUM_RULES 45
-#define YY_END_OF_BUFFER 46
-static yyconst short int yy_accept[247] =
-    {   0,
-        5,    5,    2,    2,   46,   44,    5,    4,    5,   44,
-        6,   41,   41,   44,   44,   44,   44,   44,   44,   44,
-       44,   44,   44,   44,   44,   44,   44,   44,   44,    3,
-        2,   45,    5,    5,    6,    0,   43,    0,    6,   41,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,   30,    0,
-        0,    0,    3,    2,    0,   43,    0,   42,    0,    0,
-        0,    0,    9,    0,    0,    0,    0,    0,    0,    0,
-        0,   18,    0,    0,    0,    0,   23,    0,    0,    0,
-
-        0,   26,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    8,   10,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,   25,
-        0,   27,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,   11,    0,    0,   14,    0,    0,    0,    0,
-       19,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,   31,    0,    0,    0,    0,    0,   13,    0,
-        0,    0,    0,   20,   21,   22,    0,    0,    0,   28,
-        0,    0,    0,    1,    0,    0,    0,    0,   12,   15,
-        0,    0,   17,    0,    0,    0,    0,   29,    0,    0,
-
-       32,    0,    0,    0,    0,   16,    0,    0,    0,    0,
-        0,    0,    0,   39,    7,    0,    0,   24,    0,    0,
-        0,    0,    0,   36,    0,    0,    0,    0,    0,    0,
-       33,    0,    0,    0,   34,    0,    0,    0,   40,    0,
-        0,   35,   37,    0,   38,    0
-    } ;
-
-static yyconst int yy_ec[256] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    2,    3,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    4,    1,    5,    6,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    7,    8,    8,
-        8,    8,    8,    8,    8,    8,    8,    1,    6,    1,
-        1,    1,    1,    1,    9,    9,    9,    9,    9,    9,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,   10,    1,    1,   11,    1,   12,   13,   14,   15,
-
-       16,   17,   18,    1,   19,   20,   21,   22,   23,   24,
-       25,   26,   27,   28,   29,   30,   31,   32,   33,   34,
-       35,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1
-    } ;
-
-static yyconst int yy_meta[36] =
-    {   0,
-        1,    2,    3,    2,    1,    1,    4,    4,    4,    1,
-        1,    4,    4,    4,    4,    4,    4,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1
-    } ;
-
-static yyconst short int yy_base[253] =
-    {   0,
-        0,    0,   34,   37,  293,  294,   40,  294,   41,   41,
-        0,   41,   45,   31,  273,   42,   40,  257,   38,   34,
-      274,   47,  273,  262,   53,  271,   57,   35,   60,    0,
-       79,  294,   82,   83,    0,   83,  294,   87,    0,   87,
-        0,  263,  260,  260,  255,  253,  269,   74,  245,  265,
-      244,  253,  262,  248,  259,  249,  249,  256,  255,   80,
-      239,  240,  248,  238,   80,  236,  236,  232,  294,  236,
-      233,  245,    0,   97,   95,   97,  108,    0,  230,  234,
-      242,  241,  294,  226,  242,  234,  226,  229,  234,  235,
-      226,  294,  231,  229,  220,  213,  294,  228,  209,  212,
-
-      228,  294,  209,  219,  221,  217,  216,  206,  211,  203,
-      215,  219,  194,  294,  294,  199,  196,  212,  209,  193,
-      208,  192,  190,  206,  200,  190,  195,  187,  190,  294,
-      192,  294,  188,  184,  200,  198,  195,  192,  188,  181,
-      191,  181,  294,  181,  186,  294,  186,  189,  180,  183,
-      294,  182,  161,  179,  183,  165,  170,  167,  158,  177,
-      166,  171,  294,  161,  174,  172,  158,  152,  294,  165,
-      165,  154,  162,  294,  166,  294,  153,  154,  158,  294,
-      157,  157,  160,  294,  146,  157,  140,  136,  294,  294,
-      147,  141,  294,  150,  133,  151,  139,  294,  148,  133,
-
-      294,  143,  142,  127,  126,  294,  142,  138,  140,  140,
-      124,  124,  136,  294,  294,  126,  118,  294,  130,  118,
-      113,  114,  115,  294,  125,  127,  108,  116,   99,   87,
-      294,   90,   87,   86,  294,   96,   78,   74,  294,   75,
-       64,  294,  294,   46,  294,  294,  118,  122,  126,  130,
-      134,   64
-    } ;
-
-static yyconst short int yy_def[253] =
-    {   0,
-      246,    1,  247,  247,  246,  246,  246,  246,  246,  248,
-      249,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  250,
-      246,  246,  246,  246,  249,  248,  246,  251,  249,  246,
-      252,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  250,  246,  248,  248,  251,  252,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,    0,  246,  246,  246,  246,
-      246,  246
-    } ;
-
-static yyconst short int yy_nxt[330] =
-    {   0,
-        6,    7,    8,    9,   10,   11,   12,   13,    6,    6,
-        6,   14,   15,   16,   17,   18,   19,    6,   20,   21,
-        6,    6,   22,   23,   24,   25,    6,   26,   27,   28,
-        6,   29,    6,    6,    6,   31,   32,   31,   31,   32,
-       31,   33,   33,   33,   34,   37,   35,   40,   40,   42,
-       38,   40,   40,   45,   43,   48,   51,   53,   56,   69,
-       46,   54,   57,   47,   62,   70,   63,   78,   52,   49,
-       66,   58,   67,  245,   41,   71,   59,   64,   72,  244,
-       74,   68,   74,   33,   33,   33,   34,   37,   35,   36,
-       85,   76,   38,   40,   40,   98,   77,  104,   74,   37,
-
-       74,   37,  243,  242,   38,   86,   38,  241,  105,   99,
-       36,  240,   76,  239,  238,  237,  236,   77,   30,   30,
-       30,   30,   36,   36,   36,   36,   39,   39,  235,   39,
-       73,  234,  233,   73,   75,   75,   75,   75,  232,  231,
-      230,  229,  228,  227,  226,  225,  224,  223,  222,  221,
-      220,  219,  218,  217,  216,  215,  214,  213,  212,  211,
-      210,  209,  208,  207,  206,  205,  204,  203,  202,  201,
-      200,  199,  198,  197,  196,  195,  194,  193,  192,  191,
-      190,  189,  188,  187,  186,  185,  184,  183,  182,  181,
-      180,  179,  178,  177,  176,  175,  174,  173,  172,  171,
-
-      170,  169,  168,  167,  166,  165,  164,  163,  162,  161,
-      160,  159,  158,  157,  156,  155,  154,  153,  152,  151,
-      150,  149,  148,  147,  146,  145,  144,  143,  142,  141,
-      140,  139,  138,  137,  136,  135,  134,  133,  132,  131,
-      130,  129,  128,  127,  126,  125,  124,  123,  122,  121,
-      120,  119,  118,  117,  116,  115,  114,  113,  112,  111,
-      110,  109,  108,  107,  106,  103,  102,  101,  100,   97,
-       96,   95,   94,   93,   92,   91,   90,   89,   88,   87,
-       84,   83,   82,   81,   80,   79,   65,   61,   60,   55,
-       50,   44,  246,    5,  246,  246,  246,  246,  246,  246,
-
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246
-    } ;
-
-static yyconst short int yy_chk[330] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    3,    3,    3,    4,    4,
-        4,    7,    9,    7,    9,   10,    9,   12,   12,   14,
-       10,   13,   13,   16,   14,   17,   19,   20,   22,   28,
-       16,   20,   22,   16,   25,   28,   25,  252,   19,   17,
-       27,   22,   27,  244,   12,   29,   22,   25,   29,  241,
-       31,   27,   31,   33,   34,   33,   34,   36,   34,   38,
-       48,   38,   36,   40,   40,   60,   38,   65,   74,   75,
-
-       74,   76,  240,  238,   75,   48,   76,  237,   65,   60,
-       77,  236,   77,  234,  233,  232,  230,   77,  247,  247,
-      247,  247,  248,  248,  248,  248,  249,  249,  229,  249,
-      250,  228,  227,  250,  251,  251,  251,  251,  226,  225,
-      223,  222,  221,  220,  219,  217,  216,  213,  212,  211,
-      210,  209,  208,  207,  205,  204,  203,  202,  200,  199,
-      197,  196,  195,  194,  192,  191,  188,  187,  186,  185,
-      183,  182,  181,  179,  178,  177,  175,  173,  172,  171,
-      170,  168,  167,  166,  165,  164,  162,  161,  160,  159,
-      158,  157,  156,  155,  154,  153,  152,  150,  149,  148,
-
-      147,  145,  144,  142,  141,  140,  139,  138,  137,  136,
-      135,  134,  133,  131,  129,  128,  127,  126,  125,  124,
-      123,  122,  121,  120,  119,  118,  117,  116,  113,  112,
-      111,  110,  109,  108,  107,  106,  105,  104,  103,  101,
-      100,   99,   98,   96,   95,   94,   93,   91,   90,   89,
-       88,   87,   86,   85,   84,   82,   81,   80,   79,   72,
-       71,   70,   68,   67,   66,   64,   63,   62,   61,   59,
-       58,   57,   56,   55,   54,   53,   52,   51,   50,   49,
-       47,   46,   45,   44,   43,   42,   26,   24,   23,   21,
-       18,   15,    5,  246,  246,  246,  246,  246,  246,  246,
-
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246,  246,
-      246,  246,  246,  246,  246,  246,  246,  246,  246
-    } ;
-
-static yy_state_type yy_last_accepting_state;
-static char *yy_last_accepting_cpos;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *yytext;
-#line 1 "lex_config.l"
-#define INITIAL 0
-/* Special state for handling include files */
-#define src 1
-
-#line 5 "lex_config.l"
-/*
- * lex_config.l 1.40 2001/08/24 12:21:25
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#undef src
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <syslog.h>
-#include <glob.h>
-#define src 1
-
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-
-#include "yacc_config.h"
-
-/* For assembling nice error messages */
-char *current_file;
-int current_lineno;
-
-static int lex_number(char *s);
-static int lex_string(char *s);
-static void do_source(char *fn);
-static int do_eof(void);
-
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int yywrap YY_PROTO(( void ));
-#else
-extern int yywrap YY_PROTO(( void ));
-#endif
-#endif
-
-#ifndef YY_NO_UNPUT
-//mdk-stage1// static void yyunput YY_PROTO(( int c, char *buf_ptr ));
-#endif
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen YY_PROTO(( yyconst char * ));
-#endif
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
-static int yyinput YY_PROTO(( void ));
-#else
-static int input YY_PROTO(( void ));
-#endif
-#endif
-
-#if YY_STACK_USED
-static int yy_start_stack_ptr = 0;
-static int yy_start_stack_depth = 0;
-static int *yy_start_stack = 0;
-#ifndef YY_NO_PUSH_STATE
-static void yy_push_state YY_PROTO(( int new_state ));
-#endif
-#ifndef YY_NO_POP_STATE
-static void yy_pop_state YY_PROTO(( void ));
-#endif
-#ifndef YY_NO_TOP_STATE
-static int yy_top_state YY_PROTO(( void ));
-#endif
-
-#else
-#define YY_NO_PUSH_STATE 1
-#define YY_NO_POP_STATE 1
-#define YY_NO_TOP_STATE 1
-#endif
-
-#ifdef YY_MALLOC_DECL
-YY_MALLOC_DECL
-#else
-#if __STDC__
-#ifndef __cplusplus
-#include <stdlib.h>
-#endif
-#else
-/* Just try to get by without declaring the routines.  This will fail
- * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
- * or sizeof(void*) != sizeof(int).
- */
-#endif
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO (void) fwrite( yytext, yyleng, 1, yyout )
-#endif
-
-/* Gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
-	if ( yy_current_buffer->yy_is_interactive ) \
-		{ \
-		int c = '*', n; \
-		for ( n = 0; n < max_size && \
-			     (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
-			buf[n] = (char) c; \
-		if ( c == '\n' ) \
-			buf[n++] = (char) c; \
-		if ( c == EOF && ferror( yyin ) ) \
-			YY_FATAL_ERROR( "input in flex scanner failed" ); \
-		result = n; \
-		} \
-	else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
-		  && ferror( yyin ) ) \
-		YY_FATAL_ERROR( "input in flex scanner failed" );
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL int yylex YY_PROTO(( void ))
-#endif
-
-/* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
-	YY_USER_ACTION
-
-YY_DECL
-	{
-	register yy_state_type yy_current_state;
-	register char *yy_cp = NULL, *yy_bp = NULL;
-	register int yy_act;
-
-#line 63 "lex_config.l"
-
-
-
-	if ( yy_init )
-		{
-		yy_init = 0;
-
-#ifdef YY_USER_INIT
-		YY_USER_INIT;
-#endif
-
-		if ( ! yy_start )
-			yy_start = 1;	/* first start state */
-
-		if ( ! yyin )
-			yyin = stdin;
-
-		if ( ! yyout )
-			yyout = stdout;
-
-		if ( ! yy_current_buffer )
-			yy_current_buffer =
-				yy_create_buffer( yyin, YY_BUF_SIZE );
-
-		yy_load_buffer_state();
-		}
-
-	while ( 1 )		/* loops until end-of-file is reached */
-		{
-		yy_cp = yy_c_buf_p;
-
-		/* Support of yytext. */
-		*yy_cp = yy_hold_char;
-
-		/* yy_bp points to the position in yy_ch_buf of the start of
-		 * the current run.
-		 */
-		yy_bp = yy_cp;
-
-		yy_current_state = yy_start;
-yy_match:
-		do
-			{
-			register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
-			if ( yy_accept[yy_current_state] )
-				{
-				yy_last_accepting_state = yy_current_state;
-				yy_last_accepting_cpos = yy_cp;
-				}
-			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-				{
-				yy_current_state = (int) yy_def[yy_current_state];
-				if ( yy_current_state >= 247 )
-					yy_c = yy_meta[(unsigned int) yy_c];
-				}
-			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-			++yy_cp;
-			}
-		while ( yy_base[yy_current_state] != 294 );
-
-yy_find_action:
-		yy_act = yy_accept[yy_current_state];
-		if ( yy_act == 0 )
-			{ /* have to back up */
-			yy_cp = yy_last_accepting_cpos;
-			yy_current_state = yy_last_accepting_state;
-			yy_act = yy_accept[yy_current_state];
-			}
-
-		YY_DO_BEFORE_ACTION;
-
-
-do_action:	/* This label is used only to access EOF actions. */
-
-
-		switch ( yy_act )
-	{ /* beginning of action switch */
-			case 0: /* must back up */
-			/* undo the effects of YY_DO_BEFORE_ACTION */
-			*yy_cp = yy_hold_char;
-			yy_cp = yy_last_accepting_cpos;
-			yy_current_state = yy_last_accepting_state;
-			goto yy_find_action;
-
-case 1:
-YY_RULE_SETUP
-#line 65 "lex_config.l"
-BEGIN(src);
-	YY_BREAK
-case 2:
-YY_RULE_SETUP
-#line 66 "lex_config.l"
-/* skip */ ;
-	YY_BREAK
-case 3:
-YY_RULE_SETUP
-#line 67 "lex_config.l"
-do_source(yytext); BEGIN(INITIAL);
-	YY_BREAK
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(src):
-#line 68 "lex_config.l"
-if (do_eof()) yyterminate();
-	YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 70 "lex_config.l"
-current_lineno++;
-	YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 71 "lex_config.l"
-/* skip */ ;
-	YY_BREAK
-case 6:
-YY_RULE_SETUP
-#line 72 "lex_config.l"
-/* skip */ ;
-	YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 74 "lex_config.l"
-return ANONYMOUS;
-	YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 75 "lex_config.l"
-return BIND;
-	YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 76 "lex_config.l"
-return CIS;
-	YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 77 "lex_config.l"
-return CARD;
-	YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 78 "lex_config.l"
-return CLASS;
-	YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 79 "lex_config.l"
-return DEFAULT;
-	YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 80 "lex_config.l"
-return DEVICE;
-	YY_BREAK
-case 14:
-YY_RULE_SETUP
-#line 81 "lex_config.l"
-return DTYPE;
-	YY_BREAK
-case 15:
-YY_RULE_SETUP
-#line 82 "lex_config.l"
-return EXCLUDE;
-	YY_BREAK
-case 16:
-YY_RULE_SETUP
-#line 83 "lex_config.l"
-return FUNCTION;
-	YY_BREAK
-case 17:
-YY_RULE_SETUP
-#line 84 "lex_config.l"
-return INCLUDE;
-	YY_BREAK
-case 18:
-YY_RULE_SETUP
-#line 85 "lex_config.l"
-return IRQ_NO;
-	YY_BREAK
-case 19:
-YY_RULE_SETUP
-#line 86 "lex_config.l"
-return JEDEC;
-	YY_BREAK
-case 20:
-YY_RULE_SETUP
-#line 87 "lex_config.l"
-return MANFID;
-	YY_BREAK
-case 21:
-YY_RULE_SETUP
-#line 88 "lex_config.l"
-return MEMORY;
-	YY_BREAK
-case 22:
-YY_RULE_SETUP
-#line 89 "lex_config.l"
-return MODULE;
-	YY_BREAK
-case 23:
-YY_RULE_SETUP
-#line 90 "lex_config.l"
-return MTD;
-	YY_BREAK
-case 24:
-YY_RULE_SETUP
-#line 91 "lex_config.l"
-return NEEDS_MTD;
-	YY_BREAK
-case 25:
-YY_RULE_SETUP
-#line 92 "lex_config.l"
-return OPTS;
-	YY_BREAK
-case 26:
-YY_RULE_SETUP
-#line 93 "lex_config.l"
-return PCI;
-	YY_BREAK
-case 27:
-YY_RULE_SETUP
-#line 94 "lex_config.l"
-return PORT;
-	YY_BREAK
-case 28:
-YY_RULE_SETUP
-#line 95 "lex_config.l"
-return REGION;
-	YY_BREAK
-case 29:
-YY_RULE_SETUP
-#line 96 "lex_config.l"
-return RESERVE;
-	YY_BREAK
-case 30:
-YY_RULE_SETUP
-#line 97 "lex_config.l"
-return TO;
-	YY_BREAK
-case 31:
-YY_RULE_SETUP
-#line 98 "lex_config.l"
-return TUPLE;
-	YY_BREAK
-case 32:
-YY_RULE_SETUP
-#line 99 "lex_config.l"
-return VERSION;
-	YY_BREAK
-case 33:
-YY_RULE_SETUP
-#line 101 "lex_config.l"
-return lex_number("1");
-	YY_BREAK
-case 34:
-YY_RULE_SETUP
-#line 102 "lex_config.l"
-return lex_number("2");
-	YY_BREAK
-case 35:
-YY_RULE_SETUP
-#line 103 "lex_config.l"
-return lex_number("3");
-	YY_BREAK
-case 36:
-YY_RULE_SETUP
-#line 104 "lex_config.l"
-return lex_number("4");
-	YY_BREAK
-case 37:
-YY_RULE_SETUP
-#line 105 "lex_config.l"
-return lex_number("5");
-	YY_BREAK
-case 38:
-YY_RULE_SETUP
-#line 106 "lex_config.l"
-return lex_number("6");
-	YY_BREAK
-case 39:
-YY_RULE_SETUP
-#line 107 "lex_config.l"
-return lex_number("7");
-	YY_BREAK
-case 40:
-YY_RULE_SETUP
-#line 108 "lex_config.l"
-return lex_number("8");
-	YY_BREAK
-case 41:
-YY_RULE_SETUP
-#line 110 "lex_config.l"
-return lex_number(yytext);
-	YY_BREAK
-case 42:
-YY_RULE_SETUP
-#line 112 "lex_config.l"
-return lex_number(yytext);
-	YY_BREAK
-case 43:
-YY_RULE_SETUP
-#line 114 "lex_config.l"
-return lex_string(yytext);
-	YY_BREAK
-case 44:
-YY_RULE_SETUP
-#line 116 "lex_config.l"
-return yytext[0];
-	YY_BREAK
-case 45:
-YY_RULE_SETUP
-#line 118 "lex_config.l"
-ECHO;
-	YY_BREAK
-
-	case YY_END_OF_BUFFER:
-		{
-		/* Amount of text matched not including the EOB char. */
-		int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;
-
-		/* Undo the effects of YY_DO_BEFORE_ACTION. */
-		*yy_cp = yy_hold_char;
-		YY_RESTORE_YY_MORE_OFFSET
-
-		if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
-			{
-			/* We're scanning a new file or input source.  It's
-			 * possible that this happened because the user
-			 * just pointed yyin at a new source and called
-			 * yylex().  If so, then we have to assure
-			 * consistency between yy_current_buffer and our
-			 * globals.  Here is the right place to do so, because
-			 * this is the first action (other than possibly a
-			 * back-up) that will match for the new input source.
-			 */
-			yy_n_chars = yy_current_buffer->yy_n_chars;
-			yy_current_buffer->yy_input_file = yyin;
-			yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
-			}
-
-		/* Note that here we test for yy_c_buf_p "<=" to the position
-		 * of the first EOB in the buffer, since yy_c_buf_p will
-		 * already have been incremented past the NUL character
-		 * (since all states make transitions on EOB to the
-		 * end-of-buffer state).  Contrast this with the test
-		 * in input().
-		 */
-		if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-			{ /* This was really a NUL. */
-			yy_state_type yy_next_state;
-
-			yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;
-
-			yy_current_state = yy_get_previous_state();
-
-			/* Okay, we're now positioned to make the NUL
-			 * transition.  We couldn't have
-			 * yy_get_previous_state() go ahead and do it
-			 * for us because it doesn't know how to deal
-			 * with the possibility of jamming (and we don't
-			 * want to build jamming into it because then it
-			 * will run more slowly).
-			 */
-
-			yy_next_state = yy_try_NUL_trans( yy_current_state );
-
-			yy_bp = yytext_ptr + YY_MORE_ADJ;
-
-			if ( yy_next_state )
-				{
-				/* Consume the NUL. */
-				yy_cp = ++yy_c_buf_p;
-				yy_current_state = yy_next_state;
-				goto yy_match;
-				}
-
-			else
-				{
-				yy_cp = yy_c_buf_p;
-				goto yy_find_action;
-				}
-			}
-
-		else switch ( yy_get_next_buffer() )
-			{
-			case EOB_ACT_END_OF_FILE:
-				{
-				yy_did_buffer_switch_on_eof = 0;
-
-				if ( yywrap() )
-					{
-					/* Note: because we've taken care in
-					 * yy_get_next_buffer() to have set up
-					 * yytext, we can now set up
-					 * yy_c_buf_p so that if some total
-					 * hoser (like flex itself) wants to
-					 * call the scanner after we return the
-					 * YY_NULL, it'll still work - another
-					 * YY_NULL will get returned.
-					 */
-					yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;
-
-					yy_act = YY_STATE_EOF(YY_START);
-					goto do_action;
-					}
-
-				else
-					{
-					if ( ! yy_did_buffer_switch_on_eof )
-						YY_NEW_FILE;
-					}
-				break;
-				}
-
-			case EOB_ACT_CONTINUE_SCAN:
-				yy_c_buf_p =
-					yytext_ptr + yy_amount_of_matched_text;
-
-				yy_current_state = yy_get_previous_state();
-
-				yy_cp = yy_c_buf_p;
-				yy_bp = yytext_ptr + YY_MORE_ADJ;
-				goto yy_match;
-
-			case EOB_ACT_LAST_MATCH:
-				yy_c_buf_p =
-				&yy_current_buffer->yy_ch_buf[yy_n_chars];
-
-				yy_current_state = yy_get_previous_state();
-
-				yy_cp = yy_c_buf_p;
-				yy_bp = yytext_ptr + YY_MORE_ADJ;
-				goto yy_find_action;
-			}
-		break;
-		}
-
-	default:
-		YY_FATAL_ERROR(
-			"fatal flex scanner internal error--no action found" );
-	} /* end of action switch */
-		} /* end of scanning one token */
-	} /* end of yylex */
-
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- *	EOB_ACT_LAST_MATCH -
- *	EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- *	EOB_ACT_END_OF_FILE - end of file
- */
-
-static int yy_get_next_buffer()
-	{
-	register char *dest = yy_current_buffer->yy_ch_buf;
-	register char *source = yytext_ptr;
-	register int number_to_move, i;
-	int ret_val;
-
-	if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
-		YY_FATAL_ERROR(
-		"fatal flex scanner internal error--end of buffer missed" );
-
-	if ( yy_current_buffer->yy_fill_buffer == 0 )
-		{ /* Don't try to fill the buffer, so this is an EOF. */
-		if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
-			{
-			/* We matched a single character, the EOB, so
-			 * treat this as a final EOF.
-			 */
-			return EOB_ACT_END_OF_FILE;
-			}
-
-		else
-			{
-			/* We matched some text prior to the EOB, first
-			 * process it.
-			 */
-			return EOB_ACT_LAST_MATCH;
-			}
-		}
-
-	/* Try to read more data. */
-
-	/* First move last chars to start of buffer. */
-	number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;
-
-	for ( i = 0; i < number_to_move; ++i )
-		*(dest++) = *(source++);
-
-	if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
-		/* don't do the read, it's not guaranteed to return an EOF,
-		 * just force an EOF
-		 */
-		yy_current_buffer->yy_n_chars = yy_n_chars = 0;
-
-	else
-		{
-		int num_to_read =
-			yy_current_buffer->yy_buf_size - number_to_move - 1;
-
-		while ( num_to_read <= 0 )
-			{ /* Not enough room in the buffer - grow it. */
-#ifdef YY_USES_REJECT
-			YY_FATAL_ERROR(
-"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
-#else
-
-			/* just a shorter name for the current buffer */
-			YY_BUFFER_STATE b = yy_current_buffer;
-
-			int yy_c_buf_p_offset =
-				(int) (yy_c_buf_p - b->yy_ch_buf);
-
-			if ( b->yy_is_our_buffer )
-				{
-				int new_size = b->yy_buf_size * 2;
-
-				if ( new_size <= 0 )
-					b->yy_buf_size += b->yy_buf_size / 8;
-				else
-					b->yy_buf_size *= 2;
-
-				b->yy_ch_buf = (char *)
-					/* Include room in for 2 EOB chars. */
-					yy_flex_realloc( (void *) b->yy_ch_buf,
-							 b->yy_buf_size + 2 );
-				}
-			else
-				/* Can't grow it, we don't own it. */
-				b->yy_ch_buf = 0;
-
-			if ( ! b->yy_ch_buf )
-				YY_FATAL_ERROR(
-				"fatal error - scanner input buffer overflow" );
-
-			yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
-
-			num_to_read = yy_current_buffer->yy_buf_size -
-						number_to_move - 1;
-#endif
-			}
-
-		if ( num_to_read > YY_READ_BUF_SIZE )
-			num_to_read = YY_READ_BUF_SIZE;
-
-		/* Read in more data. */
-		YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
-			yy_n_chars, num_to_read );
-
-		yy_current_buffer->yy_n_chars = yy_n_chars;
-		}
-
-	if ( yy_n_chars == 0 )
-		{
-		if ( number_to_move == YY_MORE_ADJ )
-			{
-			ret_val = EOB_ACT_END_OF_FILE;
-			yyrestart( yyin );
-			}
-
-		else
-			{
-			ret_val = EOB_ACT_LAST_MATCH;
-			yy_current_buffer->yy_buffer_status =
-				YY_BUFFER_EOF_PENDING;
-			}
-		}
-
-	else
-		ret_val = EOB_ACT_CONTINUE_SCAN;
-
-	yy_n_chars += number_to_move;
-	yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
-	yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
-
-	yytext_ptr = &yy_current_buffer->yy_ch_buf[0];
-
-	return ret_val;
-	}
-
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
-static yy_state_type yy_get_previous_state()
-	{
-	register yy_state_type yy_current_state;
-	register char *yy_cp;
-
-	yy_current_state = yy_start;
-
-	for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
-		{
-		register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
-		if ( yy_accept[yy_current_state] )
-			{
-			yy_last_accepting_state = yy_current_state;
-			yy_last_accepting_cpos = yy_cp;
-			}
-		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-			{
-			yy_current_state = (int) yy_def[yy_current_state];
-			if ( yy_current_state >= 247 )
-				yy_c = yy_meta[(unsigned int) yy_c];
-			}
-		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-		}
-
-	return yy_current_state;
-	}
-
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- *	next_state = yy_try_NUL_trans( current_state );
- */
-
-#ifdef YY_USE_PROTOS
-static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
-#else
-static yy_state_type yy_try_NUL_trans( yy_current_state )
-yy_state_type yy_current_state;
-#endif
-	{
-	register int yy_is_jam;
-	register char *yy_cp = yy_c_buf_p;
-
-	register YY_CHAR yy_c = 1;
-	if ( yy_accept[yy_current_state] )
-		{
-		yy_last_accepting_state = yy_current_state;
-		yy_last_accepting_cpos = yy_cp;
-		}
-	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-		{
-		yy_current_state = (int) yy_def[yy_current_state];
-		if ( yy_current_state >= 247 )
-			yy_c = yy_meta[(unsigned int) yy_c];
-		}
-	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-	yy_is_jam = (yy_current_state == 246);
-
-	return yy_is_jam ? 0 : yy_current_state;
-	}
-
-
-//mdk-stage1// #ifndef YY_NO_UNPUT
-//mdk-stage1// #ifdef YY_USE_PROTOS
-//mdk-stage1// static void yyunput( int c, register char *yy_bp )
-//mdk-stage1// #else
-//mdk-stage1// static void yyunput( c, yy_bp )
-//mdk-stage1// int c;
-//mdk-stage1// register char *yy_bp;
-//mdk-stage1// #endif
-//mdk-stage1// 	{
-//mdk-stage1// 	register char *yy_cp = yy_c_buf_p;
-//mdk-stage1// 
-//mdk-stage1// 	/* undo effects of setting up yytext */
-//mdk-stage1// 	*yy_cp = yy_hold_char;
-//mdk-stage1// 
-//mdk-stage1// 	if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-//mdk-stage1// 		{ /* need to shift things up to make room */
-//mdk-stage1// 		/* +2 for EOB chars. */
-//mdk-stage1// 		register int number_to_move = yy_n_chars + 2;
-//mdk-stage1// 		register char *dest = &yy_current_buffer->yy_ch_buf[
-//mdk-stage1// 					yy_current_buffer->yy_buf_size + 2];
-//mdk-stage1// 		register char *source =
-//mdk-stage1// 				&yy_current_buffer->yy_ch_buf[number_to_move];
-//mdk-stage1// 
-//mdk-stage1// 		while ( source > yy_current_buffer->yy_ch_buf )
-//mdk-stage1// 			*--dest = *--source;
-//mdk-stage1// 
-//mdk-stage1// 		yy_cp += (int) (dest - source);
-//mdk-stage1// 		yy_bp += (int) (dest - source);
-//mdk-stage1// 		yy_current_buffer->yy_n_chars =
-//mdk-stage1// 			yy_n_chars = yy_current_buffer->yy_buf_size;
-//mdk-stage1// 
-//mdk-stage1// 		if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-//mdk-stage1// 			YY_FATAL_ERROR( "flex scanner push-back overflow" );
-//mdk-stage1// 		}
-//mdk-stage1// 
-//mdk-stage1// 	*--yy_cp = (char) c;
-//mdk-stage1// 
-//mdk-stage1// 
-//mdk-stage1// 	yytext_ptr = yy_bp;
-//mdk-stage1// 	yy_hold_char = *yy_cp;
-//mdk-stage1// 	yy_c_buf_p = yy_cp;
-//mdk-stage1// 	}
-//mdk-stage1// #endif	/* ifndef YY_NO_UNPUT */
-
-
-#ifdef __cplusplus
-static int yyinput()
-#else
-static int input()
-#endif
-	{
-	int c;
-
-	*yy_c_buf_p = yy_hold_char;
-
-	if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
-		{
-		/* yy_c_buf_p now points to the character we want to return.
-		 * If this occurs *before* the EOB characters, then it's a
-		 * valid NUL; if not, then we've hit the end of the buffer.
-		 */
-		if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-			/* This was really a NUL. */
-			*yy_c_buf_p = '\0';
-
-		else
-			{ /* need more input */
-			int offset = yy_c_buf_p - yytext_ptr;
-			++yy_c_buf_p;
-
-			switch ( yy_get_next_buffer() )
-				{
-				case EOB_ACT_LAST_MATCH:
-					/* This happens because yy_g_n_b()
-					 * sees that we've accumulated a
-					 * token and flags that we need to
-					 * try matching the token before
-					 * proceeding.  But for input(),
-					 * there's no matching to consider.
-					 * So convert the EOB_ACT_LAST_MATCH
-					 * to EOB_ACT_END_OF_FILE.
-					 */
-
-					/* Reset buffer status. */
-					yyrestart( yyin );
-
-					/* fall through */
-
-				case EOB_ACT_END_OF_FILE:
-					{
-					if ( yywrap() )
-						return EOF;
-
-					if ( ! yy_did_buffer_switch_on_eof )
-						YY_NEW_FILE;
-#ifdef __cplusplus
-					return yyinput();
-#else
-					return input();
-#endif
-					}
-
-				case EOB_ACT_CONTINUE_SCAN:
-					yy_c_buf_p = yytext_ptr + offset;
-					break;
-				}
-			}
-		}
-
-	c = *(unsigned char *) yy_c_buf_p;	/* cast for 8-bit char's */
-	*yy_c_buf_p = '\0';	/* preserve yytext */
-	yy_hold_char = *++yy_c_buf_p;
-
-
-	return c;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yyrestart( FILE *input_file )
-#else
-void yyrestart( input_file )
-FILE *input_file;
-#endif
-	{
-	if ( ! yy_current_buffer )
-		yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );
-
-	yy_init_buffer( yy_current_buffer, input_file );
-	yy_load_buffer_state();
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
-#else
-void yy_switch_to_buffer( new_buffer )
-YY_BUFFER_STATE new_buffer;
-#endif
-	{
-	if ( yy_current_buffer == new_buffer )
-		return;
-
-	if ( yy_current_buffer )
-		{
-		/* Flush out information for old buffer. */
-		*yy_c_buf_p = yy_hold_char;
-		yy_current_buffer->yy_buf_pos = yy_c_buf_p;
-		yy_current_buffer->yy_n_chars = yy_n_chars;
-		}
-
-	yy_current_buffer = new_buffer;
-	yy_load_buffer_state();
-
-	/* We don't actually know whether we did this switch during
-	 * EOF (yywrap()) processing, but the only time this flag
-	 * is looked at is after yywrap() is called, so it's safe
-	 * to go ahead and always set it.
-	 */
-	yy_did_buffer_switch_on_eof = 1;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_load_buffer_state( void )
-#else
-void yy_load_buffer_state()
-#endif
-	{
-	yy_n_chars = yy_current_buffer->yy_n_chars;
-	yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
-	yyin = yy_current_buffer->yy_input_file;
-	yy_hold_char = *yy_c_buf_p;
-	}
-
-
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
-#else
-YY_BUFFER_STATE yy_create_buffer( file, size )
-FILE *file;
-int size;
-#endif
-	{
-	YY_BUFFER_STATE b;
-
-	b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
-	if ( ! b )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
-	b->yy_buf_size = size;
-
-	/* yy_ch_buf has to be 2 characters longer than the size given because
-	 * we need to put in 2 end-of-buffer characters.
-	 */
-	b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
-	if ( ! b->yy_ch_buf )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
-	b->yy_is_our_buffer = 1;
-
-	yy_init_buffer( b, file );
-
-	return b;
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_delete_buffer( YY_BUFFER_STATE b )
-#else
-void yy_delete_buffer( b )
-YY_BUFFER_STATE b;
-#endif
-	{
-	if ( ! b )
-		return;
-
-	if ( b == yy_current_buffer )
-		yy_current_buffer = (YY_BUFFER_STATE) 0;
-
-	if ( b->yy_is_our_buffer )
-		yy_flex_free( (void *) b->yy_ch_buf );
-
-	yy_flex_free( (void *) b );
-	}
-
-
-#ifndef YY_ALWAYS_INTERACTIVE
-#ifndef YY_NEVER_INTERACTIVE
-extern int isatty YY_PROTO(( int ));
-#endif
-#endif
-
-#ifdef YY_USE_PROTOS
-void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
-#else
-void yy_init_buffer( b, file )
-YY_BUFFER_STATE b;
-FILE *file;
-#endif
-
-
-	{
-	yy_flush_buffer( b );
-
-	b->yy_input_file = file;
-	b->yy_fill_buffer = 1;
-
-#if YY_ALWAYS_INTERACTIVE
-	b->yy_is_interactive = 1;
-#else
-#if YY_NEVER_INTERACTIVE
-	b->yy_is_interactive = 0;
-#else
-	b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-#endif
-#endif
-	}
-
-
-#ifdef YY_USE_PROTOS
-void yy_flush_buffer( YY_BUFFER_STATE b )
-#else
-void yy_flush_buffer( b )
-YY_BUFFER_STATE b;
-#endif
-
-	{
-	if ( ! b )
-		return;
-
-	b->yy_n_chars = 0;
-
-	/* We always need two end-of-buffer characters.  The first causes
-	 * a transition to the end-of-buffer state.  The second causes
-	 * a jam in that state.
-	 */
-	b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
-	b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
-	b->yy_buf_pos = &b->yy_ch_buf[0];
-
-	b->yy_at_bol = 1;
-	b->yy_buffer_status = YY_BUFFER_NEW;
-
-	if ( b == yy_current_buffer )
-		yy_load_buffer_state();
-	}
-
-
-#ifndef YY_NO_SCAN_BUFFER
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
-#else
-YY_BUFFER_STATE yy_scan_buffer( base, size )
-char *base;
-yy_size_t size;
-#endif
-	{
-	YY_BUFFER_STATE b;
-
-	if ( size < 2 ||
-	     base[size-2] != YY_END_OF_BUFFER_CHAR ||
-	     base[size-1] != YY_END_OF_BUFFER_CHAR )
-		/* They forgot to leave room for the EOB's. */
-		return 0;
-
-	b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
-	if ( ! b )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
-	b->yy_buf_size = size - 2;	/* "- 2" to take care of EOB's */
-	b->yy_buf_pos = b->yy_ch_buf = base;
-	b->yy_is_our_buffer = 0;
-	b->yy_input_file = 0;
-	b->yy_n_chars = b->yy_buf_size;
-	b->yy_is_interactive = 0;
-	b->yy_at_bol = 1;
-	b->yy_fill_buffer = 0;
-	b->yy_buffer_status = YY_BUFFER_NEW;
-
-	yy_switch_to_buffer( b );
-
-	return b;
-	}
-#endif
-
-
-#ifndef YY_NO_SCAN_STRING
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
-#else
-YY_BUFFER_STATE yy_scan_string( yy_str )
-yyconst char *yy_str;
-#endif
-	{
-	int len;
-	for ( len = 0; yy_str[len]; ++len )
-		;
-
-	return yy_scan_bytes( yy_str, len );
-	}
-#endif
-
-
-#ifndef YY_NO_SCAN_BYTES
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
-#else
-YY_BUFFER_STATE yy_scan_bytes( bytes, len )
-yyconst char *bytes;
-int len;
-#endif
-	{
-	YY_BUFFER_STATE b;
-	char *buf;
-	yy_size_t n;
-	int i;
-
-	/* Get memory for full buffer, including space for trailing EOB's. */
-	n = len + 2;
-	buf = (char *) yy_flex_alloc( n );
-	if ( ! buf )
-		YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
-	for ( i = 0; i < len; ++i )
-		buf[i] = bytes[i];
-
-	buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
-
-	b = yy_scan_buffer( buf, n );
-	if ( ! b )
-		YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
-	/* It's okay to grow etc. this buffer, and we should throw it
-	 * away when we're done.
-	 */
-	b->yy_is_our_buffer = 1;
-
-	return b;
-	}
-#endif
-
-
-#ifndef YY_NO_PUSH_STATE
-#ifdef YY_USE_PROTOS
-static void yy_push_state( int new_state )
-#else
-static void yy_push_state( new_state )
-int new_state;
-#endif
-	{
-	if ( yy_start_stack_ptr >= yy_start_stack_depth )
-		{
-		yy_size_t new_size;
-
-		yy_start_stack_depth += YY_START_STACK_INCR;
-		new_size = yy_start_stack_depth * sizeof( int );
-
-		if ( ! yy_start_stack )
-			yy_start_stack = (int *) yy_flex_alloc( new_size );
-
-		else
-			yy_start_stack = (int *) yy_flex_realloc(
-					(void *) yy_start_stack, new_size );
-
-		if ( ! yy_start_stack )
-			YY_FATAL_ERROR(
-			"out of memory expanding start-condition stack" );
-		}
-
-	yy_start_stack[yy_start_stack_ptr++] = YY_START;
-
-	BEGIN(new_state);
-	}
-#endif
-
-
-#ifndef YY_NO_POP_STATE
-static void yy_pop_state()
-	{
-	if ( --yy_start_stack_ptr < 0 )
-		YY_FATAL_ERROR( "start-condition stack underflow" );
-
-	BEGIN(yy_start_stack[yy_start_stack_ptr]);
-	}
-#endif
-
-
-#ifndef YY_NO_TOP_STATE
-static int yy_top_state()
-	{
-	return yy_start_stack[yy_start_stack_ptr - 1];
-	}
-#endif
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-#ifdef YY_USE_PROTOS
-static void yy_fatal_error( yyconst char msg[] )
-#else
-static void yy_fatal_error( msg )
-char msg[];
-#endif
-	{
-	(void) fprintf( stderr, "%s\n", msg );
-	exit( YY_EXIT_FAILURE );
-	}
-
-
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
-	do \
-		{ \
-		/* Undo effects of setting up yytext. */ \
-		yytext[yyleng] = yy_hold_char; \
-		yy_c_buf_p = yytext + n; \
-		yy_hold_char = *yy_c_buf_p; \
-		*yy_c_buf_p = '\0'; \
-		yyleng = n; \
-		} \
-	while ( 0 )
-
-
-/* Internal utility routines. */
-
-#ifndef yytext_ptr
-#ifdef YY_USE_PROTOS
-static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
-#else
-static void yy_flex_strncpy( s1, s2, n )
-char *s1;
-yyconst char *s2;
-int n;
-#endif
-	{
-	register int i;
-	for ( i = 0; i < n; ++i )
-		s1[i] = s2[i];
-	}
-#endif
-
-#ifdef YY_NEED_STRLEN
-#ifdef YY_USE_PROTOS
-static int yy_flex_strlen( yyconst char *s )
-#else
-static int yy_flex_strlen( s )
-yyconst char *s;
-#endif
-	{
-	register int n;
-	for ( n = 0; s[n]; ++n )
-		;
-
-	return n;
-	}
-#endif
-
-
-#ifdef YY_USE_PROTOS
-static void *yy_flex_alloc( yy_size_t size )
-#else
-static void *yy_flex_alloc( size )
-yy_size_t size;
-#endif
-	{
-	return (void *) malloc( size );
-	}
-
-#ifdef YY_USE_PROTOS
-static void *yy_flex_realloc( void *ptr, yy_size_t size )
-#else
-static void *yy_flex_realloc( ptr, size )
-void *ptr;
-yy_size_t size;
-#endif
-	{
-	/* The cast to (char *) in the following accommodates both
-	 * implementations that use char* generic pointers, and those
-	 * that use void* generic pointers.  It works with the latter
-	 * because both ANSI C and C++ allow castless assignment from
-	 * any pointer type to void*, and deal with argument conversions
-	 * as though doing an assignment.
-	 */
-	return (void *) realloc( (char *) ptr, size );
-	}
-
-#ifdef YY_USE_PROTOS
-static void yy_flex_free( void *ptr )
-#else
-static void yy_flex_free( ptr )
-void *ptr;
-#endif
-	{
-	free( ptr );
-	}
-
-#if YY_MAIN
-int main()
-	{
-	yylex();
-	return 0;
-	}
-#endif
-#line 118 "lex_config.l"
-
-
-#ifndef yywrap
-int yywrap() { return 1; }
-#endif
-
-/*======================================================================
-
-    Stuff to parse basic data types
-
-======================================================================*/
-
-static int lex_number(char *s)
-{
-    yylval.num = strtoul(s, NULL, 0);
-    return NUMBER;
-}
-
-static int lex_string(char *s)
-{
-    int n = strlen(s);
-    yylval.str = malloc(n-1);
-    strncpy(yylval.str, s+1, n-2);
-    yylval.str[n-2] = '\0';
-    return STRING;
-}
-
-/*======================================================================
-
-    Code to support nesting of configuration files
-
-======================================================================*/
-
-#define MAX_SOURCE_DEPTH 4
-struct source_stack {
-    YY_BUFFER_STATE	buffer;
-    char		*filename;
-    int			lineno, fileno;
-    FILE		*file;
-    glob_t		glob;
-} source_stack[MAX_SOURCE_DEPTH];
-static int source_stack_ptr = 0;
-static int parse_env = 0;
-
-static int get_glob(void)
-{
-    struct source_stack *s = &source_stack[source_stack_ptr];
-    while (s->fileno < s->glob.gl_pathc) {
-	char *fn = s->glob.gl_pathv[s->fileno];
-	s->file = fopen(fn, "r");
-	if (s->file == NULL) {
-	    if (strpbrk(fn, "?*[") == NULL)
-		syslog(LOG_INFO, "could not open '%s': %m", fn);
-	    s->fileno++;
-	} else {
-	    current_lineno = 1;
-	    current_file = strdup(fn);
-	    yy_switch_to_buffer(yy_create_buffer(s->file, YY_BUF_SIZE));
-	    source_stack_ptr++;
-	    s->fileno++;
-	    return 0;
-	}
-    }
-    return -1;
-}
-
-static void do_source(char *fn)
-{
-    struct source_stack *s = &source_stack[source_stack_ptr];
-
-    if (source_stack_ptr >= MAX_SOURCE_DEPTH) {
-	syslog(LOG_INFO, "source depth limit exceeded");
-	return;
-    }
-    glob(fn, GLOB_NOCHECK, NULL, &s->glob);
-    s->fileno = 0;
-    s->buffer = YY_CURRENT_BUFFER;
-    s->lineno = current_lineno;
-    s->filename = current_file;
-    get_glob();
-}
-
-static int do_eof(void)
-{
-    struct source_stack *s = &source_stack[--source_stack_ptr];
-    if (source_stack_ptr < 0) {
-	if (parse_env == 0) {
-	    char *t = getenv("PCMCIA_OPTS");
-	    if (t == NULL) return -1;
-	    parse_env = 1;
-	    source_stack_ptr = 0;
-	    current_file = "PCMCIA_OPTS";
-	    current_lineno = 1;
-	    yy_scan_string(t);
-	    return 0;
-	} else
-	    return -1;
-    }
-    fclose(s->file);
-    free(current_file);
-    yy_delete_buffer(YY_CURRENT_BUFFER);
-    if (get_glob() != 0) {
-	yy_switch_to_buffer(s->buffer);
-	current_lineno = s->lineno;
-	current_file = s->filename;
-    }
-    return 0;
-}
-
-/*======================================================================
-
-    The main entry point... returns -1 if the file can't be accessed.
-
-======================================================================*/
-int yyparse(void);
-
-int parse_configfile(char *fn)
-{
-    FILE *f;
-    
-    f = fopen(fn, "r");
-    if (!f) {
-	syslog(LOG_INFO, "could not open '%s': %m", fn);
-	return -1;
-    }
-    current_lineno = 1;
-    current_file = fn;
-    source_stack_ptr = 0;
-    yyrestart(f);
-    yyparse();
-    fclose(f);
-    return 0;
-}
-
diff --git a/mdk-stage1/pcmcia_/merge_from_pcitable b/mdk-stage1/pcmcia_/merge_from_pcitable
deleted file mode 100755
index 3b88a1cd8..000000000
--- a/mdk-stage1/pcmcia_/merge_from_pcitable
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/usr/bin/perl
-
-# This program will show on stdout yenta_socket stuff from pcitable
-# which is not in probe.c
-
-use MDK::Common;
-
-my %probes;
-foreach (cat_('probe.c')) {
-    if (/^pci_id_t pci_id\[\] = {/ ... /^};/) {
-	/^\s*{\s*0x([\da-f]+),\s*0x([\da-f]+),\s*"([^"]*)",\s*"([^"]*)"\s*}/
-	  and $probes{"$1$2"} = { vendor => $1, device => $2, driver => $3, name => $4 };
-    }
-}
-
-require '/usr/bin/merge2pcitable.pl';
-my $drivers = read_pcitable("/usr/share/ldetect-lst/pcitable");
-
-my %pcitable = map_each {
-    $::a =~ /^(....)(....)/ or die;
-    "$1$2" => { vendor => $1, device => $2, driver => $::b->[0], name => $::b->[1] };
-} %$drivers;
-
-my @yenta_socket_ids = grep { $pcitable{$_}{driver} eq 'yenta_socket' } keys %pcitable;
-
-if (my @missing_in_probe_c = difference2(\@yenta_socket_ids, [ keys %probes ])) {
-    print "Missing in `probe.c':\n",
-      map { 
-	  my $p = $pcitable{$_};
-	  qq(    { 0x$p->{vendor}, 0x$p->{device}, "yenta_socket", "$p->{name}" },\n);
-      } sort @missing_in_probe_c;
-}
-
-my @res;
-foreach my $id (keys %probes) {
-    my $p = $probes{$id};
-    my $r = $pcitable{$id};
-    if (!$r || $r->{driver} ne 'yenta_socket') {
-	push @res, qq(0x$p->{vendor}\t0x$p->{device}\t"yenta_socket"\t") . ($r ? $r->{name} : '(COMPLETELY MISSING)') . qq("\n);
-    }
-    if ($r && $r->{driver} ne 'unknown' && $r->{driver} ne $p->{driver}) {
-	warn "WARNING: $id: pcitable:$r->{driver} vs probe.c:$p->{driver}\n";
-    }
-}
-if (@res) {
-    print "\n", "Missing in pcitable:\n", sort @res;
-}
diff --git a/mdk-stage1/pcmcia_/pcmcia.h b/mdk-stage1/pcmcia_/pcmcia.h
deleted file mode 100644
index 3559d5fd6..000000000
--- a/mdk-stage1/pcmcia_/pcmcia.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _PCMCIA_CARDMGR_INTERFACE_H_
-#define _PCMCIA_CARDMGR_INTERFACE_H_
-
-char * pcmcia_probe(void);
-int cardmgr_call(void);
-
-#endif
diff --git a/mdk-stage1/pcmcia_/probe.c b/mdk-stage1/pcmcia_/probe.c
deleted file mode 100644
index 8f8a4bc8e..000000000
--- a/mdk-stage1/pcmcia_/probe.c
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000-2001 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * Code comes from /anonymous@projects.sourceforge.net:/pub/pcmcia-cs/pcmcia-cs-3.1.29.tar.bz2
- */
-
-/*======================================================================
-
-    PCMCIA controller probe
-
-    probe.c 1.55 2001/08/24 12:19:20
-
-    The contents of this file are subject to the Mozilla Public
-    License Version 1.1 (the "License"); you may not use this file
-    except in compliance with the License. You may obtain a copy of
-    the License at http://www.mozilla.org/MPL/
-
-    Software distributed under the License is distributed on an "AS
-    IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
-    implied. See the License for the specific language governing
-    rights and limitations under the License.
-
-    The initial developer of the original code is David A. Hinds
-    <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
-    are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
-
-    Alternatively, the contents of this file may be used under the
-    terms of the GNU General Public License version 2 (the "GPL"), in
-    which case the provisions of the GPL are applicable instead of the
-    above.  If you wish to allow the use of your version of this file
-    only under the terms of the GPL and not to allow others to use
-    your version of this file under the MPL, indicate your decision
-    by deleting the provisions above and replace them with the notice
-    and other provisions required by the GPL.  If you do not delete
-    the provisions above, a recipient may use your version of this
-    file under either the MPL or the GPL.
-    
-======================================================================*/
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-
-//mdk-stage1// #include <pcmcia/config.h>
-#include "log.h"
-#include "pcmcia.h"
-
-/*====================================================================*/
-
-//mdk-stage1// #ifdef CONFIG_PCI
-
-typedef struct {
-    u_short	vendor, device;
-    char	*modname;
-    char	*name;
-} pci_id_t;
-
-pci_id_t pci_id[] = {
-    { 0x1013, 0x1100, "i82365", "Cirrus Logic CL 6729" },
-    { 0x1013, 0x1110, "yenta_socket", "Cirrus Logic PD 6832" },
-    { 0x10b3, 0xb106, "yenta_socket", "SMC 34C90" },
-    { 0x1180, 0x0465, "yenta_socket", "Ricoh RL5C465" },
-    { 0x1180, 0x0466, "yenta_socket", "Ricoh RL5C466" },
-    { 0x1180, 0x0475, "yenta_socket", "Ricoh RL5C475" },
-    { 0x1180, 0x0476, "yenta_socket", "Ricoh RL5C476" },
-    { 0x1180, 0x0477, "yenta_socket", "Ricoh RL5C477" },
-    { 0x1180, 0x0478, "yenta_socket", "Ricoh RL5C478" },
-    { 0x104c, 0xac12, "yenta_socket", "Texas Instruments PCI1130" }, 
-    { 0x104c, 0xac13, "yenta_socket", "Texas Instruments PCI1031" }, 
-    { 0x104c, 0xac15, "yenta_socket", "Texas Instruments PCI1131" }, 
-    { 0x104c, 0xac1a, "yenta_socket", "Texas Instruments PCI1210" }, 
-    { 0x104c, 0xac1e, "yenta_socket", "Texas Instruments PCI1211" }, 
-    { 0x104c, 0xac17, "yenta_socket", "Texas Instruments PCI1220" }, 
-    { 0x104c, 0xac19, "yenta_socket", "Texas Instruments PCI1221" }, 
-    { 0x104c, 0xac1c, "yenta_socket", "Texas Instruments PCI1225" }, 
-    { 0x104c, 0xac16, "yenta_socket", "Texas Instruments PCI1250" }, 
-    { 0x104c, 0xac1d, "yenta_socket", "Texas Instruments PCI1251A" }, 
-    { 0x104c, 0xac1f, "yenta_socket", "Texas Instruments PCI1251B" }, 
-    { 0x104c, 0xac50, "yenta_socket", "Texas Instruments PCI1410" }, 
-    { 0x104c, 0xac51, "yenta_socket", "Texas Instruments PCI1420" }, 
-    { 0x104c, 0xac1b, "yenta_socket", "Texas Instruments PCI1450" }, 
-    { 0x104c, 0xac52, "yenta_socket", "Texas Instruments PCI1451" }, 
-    { 0x104c, 0xac56, "yenta_socket", "Texas Instruments PCI1510" }, 
-    { 0x104c, 0xac55, "yenta_socket", "Texas Instruments PCI1520" }, 
-    { 0x104c, 0xac54, "yenta_socket", "Texas Instruments PCI1620" }, 
-    { 0x104c, 0xac41, "yenta_socket", "Texas Instruments PCI4410" }, 
-    { 0x104c, 0xac40, "yenta_socket", "Texas Instruments PCI4450" }, 
-    { 0x104c, 0xac42, "yenta_socket", "Texas Instruments PCI4451" }, 
-    { 0x104c, 0xac44, "yenta_socket", "Texas Instruments PCI4510" }, 
-    { 0x104c, 0xac46, "yenta_socket", "Texas Instruments PCI4520" }, 
-    { 0x104c, 0xac49, "yenta_socket", "Texas Instruments PCI7410" }, 
-    { 0x104c, 0xac47, "yenta_socket", "Texas Instruments PCI7510" }, 
-    { 0x104c, 0xac48, "yenta_socket", "Texas Instruments PCI7610" }, 
-    { 0x104c, 0xac8e, "yenta_socket", "Texas Instruments PCI7420" },
-    { 0x1217, 0x6729, "i82365", "O2 Micro 6729" }, 
-    { 0x1217, 0x673a, "i82365", "O2 Micro 6730" }, 
-    { 0x1217, 0x6832, "yenta_socket", "O2 Micro 6832/6833" }, 
-    { 0x1217, 0x6836, "yenta_socket", "O2 Micro 6836/6860" }, 
-    { 0x1217, 0x6872, "yenta_socket", "O2 Micro 6812" }, 
-    { 0x1217, 0x6925, "yenta_socket", "O2 Micro 6922" }, 
-    { 0x1217, 0x6933, "yenta_socket", "O2 Micro 6933" }, 
-    { 0x1217, 0x6972, "yenta_socket", "O2 Micro 6912" }, 
-    { 0x1217, 0x7114, "yenta_socket", "O2 Micro 711M1" },
-    { 0x1179, 0x0603, "i82365", "Toshiba ToPIC95-A" }, 
-    { 0x1179, 0x060a, "yenta_socket", "Toshiba ToPIC95-B" }, 
-    { 0x1179, 0x060f, "yenta_socket", "Toshiba ToPIC97" }, 
-    { 0x1179, 0x0617, "yenta_socket", "Toshiba ToPIC100" }, 
-    { 0x119b, 0x1221, "i82365", "Omega Micro 82C092G" }, 
-    { 0x8086, 0x1221, "i82092", "Intel 82092AA_0" }, 
-    { 0x8086, 0x1222, "i82092", "Intel 82092AA_1" }, 
-    { 0x1524, 0x1211, "yenta_socket", "ENE 1211" },
-    { 0x1524, 0x1225, "yenta_socket", "ENE 1225" },
-    { 0x1524, 0x1410, "yenta_socket", "ENE 1410" },
-    { 0x1524, 0x1411, "yenta_socket", "ENE Technology CB1411" },
-    { 0x1524, 0x1420, "yenta_socket", "ENE 1420" },
-};
-#define PCI_COUNT (sizeof(pci_id)/sizeof(pci_id_t))
-
-char * driver = NULL;
-
-static int pci_probe(void)
-{
-    char s[256], *name = NULL;
-    u_int device, vendor, i;
-    FILE *f;
-    
-//mdk-stage1//     if (!module)
-    log_message("PCMCIA: probing PCI bus..");
-
-    if ((f = fopen("/proc/bus/pci/devices", "r")) != NULL) {
-	while (fgets(s, 256, f) != NULL) {
-	    u_int n = strtoul(s+5, NULL, 16);
-	    vendor = (n >> 16); device = (n & 0xffff);
-	    for (i = 0; i < PCI_COUNT; i++)
-		if ((vendor == pci_id[i].vendor) &&
-		    (device == pci_id[i].device)) break;
-	    if (i < PCI_COUNT) {
-		name = pci_id[i].name;
-		driver = pci_id[i].modname;
-	    }
-	}
-    }
-//mdk-stage1// else if ((f = fopen("/proc/pci", "r")) != NULL) {
-//mdk-stage1// 	while (fgets(s, 256, f) != NULL) {
-//mdk-stage1// 	    t = strstr(s, "Device id=");
-//mdk-stage1// 	    if (t) {
-//mdk-stage1// 		device = strtoul(t+10, NULL, 16);
-//mdk-stage1// 		t = strstr(s, "Vendor id=");
-//mdk-stage1// 		vendor = strtoul(t+10, NULL, 16);
-//mdk-stage1// 		for (i = 0; i < PCI_COUNT; i++)
-//mdk-stage1// 		    if ((vendor == pci_id[i].vendor) &&
-//mdk-stage1// 			(device == pci_id[i].device)) break;
-//mdk-stage1// 	    } else
-//mdk-stage1// 		for (i = 0; i < PCI_COUNT; i++)
-//mdk-stage1// 		    if (strstr(s, pci_id[i].tag) != NULL) break;
-//mdk-stage1// 	    if (i != PCI_COUNT) {
-//mdk-stage1// 		name = pci_id[i].name;
-//mdk-stage1// 		break;
-//mdk-stage1// 	    } else {
-//mdk-stage1// 		t = strstr(s, "CardBus bridge");
-//mdk-stage1// 		if (t != NULL) {
-//mdk-stage1// 		    name = t + 16;
-//mdk-stage1// 		    t = strchr(s, '(');
-//mdk-stage1// 		    t[-1] = '\0';
-//mdk-stage1// 		    break;
-//mdk-stage1// 		}
-//mdk-stage1// 	    }
-//mdk-stage1// 	}
-//mdk-stage1//     }
-    fclose(f);
-
-    if (name) {
-//mdk-stage1// 	if (module)
-//mdk-stage1// 	    printf("i82365\n");
-//mdk-stage1// 	else
-	    log_message("\t%s found, 2 sockets (driver %s).", name, driver);
-	return 0;
-    } else {
-//mdk-stage1// 	if (!module)
-	    log_message("\tnot found.");
-	return -ENODEV;
-    }
-}
-//mdk-stage1// #endif
-
-/*====================================================================*/
-
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1// 
-//mdk-stage1// #ifdef __GLIBC__
-#include <sys/io.h>
-//mdk-stage1// #else
-//mdk-stage1// #include <asm/io.h>
-//mdk-stage1// #endif
-typedef u_short ioaddr_t;
-
-#include "i82365.h"
-#include "cirrus.h"
-#include "vg468.h"
-
-static ioaddr_t i365_base = 0x03e0;
-
-static u_char i365_get(u_short sock, u_short reg)
-{
-    u_char val = I365_REG(sock, reg);
-    outb(val, i365_base); val = inb(i365_base+1);
-    return val;
-}
-
-static void i365_set(u_short sock, u_short reg, u_char data)
-{
-    u_char val = I365_REG(sock, reg);
-    outb(val, i365_base); outb(data, i365_base+1);
-}
-
-static void i365_bset(u_short sock, u_short reg, u_char mask)
-{
-    u_char d = i365_get(sock, reg);
-    d |= mask;
-    i365_set(sock, reg, d);
-}
-
-static void i365_bclr(u_short sock, u_short reg, u_char mask)
-{
-    u_char d = i365_get(sock, reg);
-    d &= ~mask;
-    i365_set(sock, reg, d);
-}
-
-int i365_probe(void)
-{
-    int val, sock, done;
-    char *name = "i82365sl";
-
-//mdk-stage1// if (!module)
-    log_message("PCMCIA: probing for Intel PCIC (ISA)..");
-//mdk-stage1//     if (verbose) printf("\n");
-    
-    sock = done = 0;
-    if (ioperm(i365_base, 4, 1)) {
-               log_perror("PCMCIA: ioperm");
-               return -1;
-    }
-    ioperm(0x80, 1, 1);
-    for (; sock < 2; sock++) {
-	val = i365_get(sock, I365_IDENT);
-//mdk-stage1//	if (verbose)
-//mdk-stage1//	    printf("  ident(%d)=%#2.2x", sock, val); 
-	switch (val) {
-	case 0x82:
-	    name = "i82365sl A step";
-	    break;
-	case 0x83:
-	    name = "i82365sl B step";
-	    break;
-	case 0x84:
-	    name = "VLSI 82C146";
-	    break;
-	case 0x88: case 0x89: case 0x8a:
-	    name = "IBM Clone";
-	    break;
-	case 0x8b: case 0x8c:
-	    break;
-	default:
-	    done = 1;
-	}
-	if (done) break;
-    }
-
-//mdk-stage1//    if (verbose) printf("\n  ");
-    if (sock == 0) {
-//mdk-stage1//	if (!module)
-	log_message("\tnot found.");
-	return -ENODEV;
-    }
-
-    if ((sock == 2) && (strcmp(name, "VLSI 82C146") == 0))
-	name = "i82365sl DF";
-
-    /* Check for Vadem chips */
-    outb(0x0e, i365_base);
-    outb(0x37, i365_base);
-    i365_bset(0, VG468_MISC, VG468_MISC_VADEMREV);
-    val = i365_get(0, I365_IDENT);
-    if (val & I365_IDENT_VADEM) {
-	if ((val & 7) < 4)
-	    name = "Vadem VG-468";
-	else
-	    name = "Vadem VG-469";
-	i365_bclr(0, VG468_MISC, VG468_MISC_VADEMREV);
-    }
-    
-    /* Check for Cirrus CL-PD67xx chips */
-    i365_set(0, PD67_CHIP_INFO, 0);
-    val = i365_get(0, PD67_CHIP_INFO);
-    if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
-	val = i365_get(0, PD67_CHIP_INFO);
-	if ((val & PD67_INFO_CHIP_ID) == 0) {
-	    if (val & PD67_INFO_SLOTS)
-		name = "Cirrus CL-PD672x";
-	    else {
-		name = "Cirrus CL-PD6710";
-		sock = 1;
-	    }
-	    i365_set(0, PD67_EXT_INDEX, 0xe5);
-	    if (i365_get(0, PD67_EXT_INDEX) != 0xe5)
-		name = "VIA VT83C469";
-	}
-    }
-
-//mdk-stage1//    if (module)
-//mdk-stage1//	printf("i82365\n");
-//mdk-stage1//    else
-	printf("\t%s found, %d sockets.\n", name, sock);
-    return 0;
-    
-} /* i365_probe */
-
-//mdk-stage1//#endif /* CONFIG_ISA */
-
-/*====================================================================*/
-
-//mdk-stage1//#ifdef CONFIG_ISA
-
-#include "tcic.h"
-
-//mdk-stage1//static ioaddr_t tcic_base = TCIC_BASE;
-
-static u_char tcic_getb(ioaddr_t base, u_char reg)
-{
-    u_char val = inb(base+reg);
-    return val;
-}
-
-static void tcic_setb(ioaddr_t base, u_char reg, u_char data)
-{
-    outb(data, base+reg);
-}
-
-static u_short tcic_getw(ioaddr_t base, u_char reg)
-{
-    u_short val = inw(base+reg);
-    return val;
-}
-
-static void tcic_setw(ioaddr_t base, u_char reg, u_short data)
-{
-    outw(data, base+reg);
-}
-
-static u_short tcic_aux_getw(ioaddr_t base, u_short reg)
-{
-    u_char mode = (tcic_getb(base, TCIC_MODE) & TCIC_MODE_PGMMASK) | reg;
-    tcic_setb(base, TCIC_MODE, mode);
-    return tcic_getw(base, TCIC_AUX);
-}
-
-static void tcic_aux_setw(ioaddr_t base, u_short reg, u_short data)
-{
-    u_char mode = (tcic_getb(base, TCIC_MODE) & TCIC_MODE_PGMMASK) | reg;
-    tcic_setb(base, TCIC_MODE, mode);
-    tcic_setw(base, TCIC_AUX, data);
-}
-
-static int get_tcic_id(ioaddr_t base)
-{
-    u_short id;
-    tcic_aux_setw(base, TCIC_AUX_TEST, TCIC_TEST_DIAG);
-    id = tcic_aux_getw(base, TCIC_AUX_ILOCK);
-    id = (id & TCIC_ILOCKTEST_ID_MASK) >> TCIC_ILOCKTEST_ID_SH;
-    tcic_aux_setw(base, TCIC_AUX_TEST, 0);
-    return id;
-}
-
-int tcic_probe_at(ioaddr_t base)
-{
-    int i;
-    u_short old;
-    
-    /* Anything there?? */
-    for (i = 0; i < 0x10; i += 2)
-	if (tcic_getw(base, i) == 0xffff)
-	    return -1;
-
-//mdk-stage1//    if (!module)
-    log_message("\tat %#3.3x: ", base); fflush(stdout);
-
-    /* Try to reset the chip */
-    tcic_setw(base, TCIC_SCTRL, TCIC_SCTRL_RESET);
-    tcic_setw(base, TCIC_SCTRL, 0);
-    
-    /* Can we set the addr register? */
-    old = tcic_getw(base, TCIC_ADDR);
-    tcic_setw(base, TCIC_ADDR, 0);
-    if (tcic_getw(base, TCIC_ADDR) != 0) {
-	tcic_setw(base, TCIC_ADDR, old);
-	return -2;
-    }
-    
-    tcic_setw(base, TCIC_ADDR, 0xc3a5);
-    if (tcic_getw(base, TCIC_ADDR) != 0xc3a5)
-	return -3;
-
-    return 2;
-}
-
-int tcic_probe(void)
-{
-    int sock, id;
-
-//mdk-stage1//     if (!module)
-    log_message("PCMCIA: probing for Databook TCIC-2 (ISA).."); fflush(stdout);
-    
-    if (ioperm(TCIC_BASE, 16, 1)) {
-	    log_perror("PCMCIA: ioperm");
-	    return -1;
-    }
-    ioperm(0x80, 1, 1);
-    sock = tcic_probe_at(TCIC_BASE);
-    
-    if (sock <= 0) {
-//mdk-stage1//	if (!module)
-	    log_message("\tnot found.");
-	return -ENODEV;
-    }
-
-//mdk-stage1//    if (module)
-//mdk-stage1//	printf("tcic\n");
-//mdk-stage1//    else {
-	id = get_tcic_id(TCIC_BASE);
-	switch (id) {
-	case TCIC_ID_DB86082:
-	    log_message("DB86082"); break;
-	case TCIC_ID_DB86082A:
-	    log_message("DB86082A"); break;
-	case TCIC_ID_DB86084:
-	    log_message("DB86084"); break;
-	case TCIC_ID_DB86084A:
-	    log_message("DB86084A"); break;
-	case TCIC_ID_DB86072:
-	    log_message("DB86072"); break;
-	case TCIC_ID_DB86184:
-	    log_message("DB86184"); break;
-	case TCIC_ID_DB86082B:
-	    log_message("DB86082B"); break;
-	default:
-	    log_message("Unknown TCIC-2 ID 0x%02x", id);
-	}
-	log_message(" found at %#6x, %d sockets.", TCIC_BASE, sock);
-//mdk-stage1//     }
-    return 0;
-    
-} /* tcic_probe */
-
-//mdk-stage1// #endif /* CONFIG_ISA */
-
-//mdk-stage1// /*====================================================================*/
-//mdk-stage1// 
-//mdk-stage1// int main(int argc, char *argv[])
-//mdk-stage1// {
-//mdk-stage1//     int optch, errflg;
-//mdk-stage1//     extern char *optarg;
-//mdk-stage1//     int verbose = 0, module = 0;
-//mdk-stage1//     
-//mdk-stage1//     errflg = 0;
-//mdk-stage1//     while ((optch = getopt(argc, argv, "t:vxm")) != -1) {
-//mdk-stage1// 	switch (optch) {
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1// 	case 't':
-//mdk-stage1// 	    tcic_base = strtoul(optarg, NULL, 0); break;
-//mdk-stage1// #endif
-//mdk-stage1// 	case 'v':
-//mdk-stage1// 	    verbose = 1; break;
-//mdk-stage1// 	case 'm':
-//mdk-stage1// 	    module = 1; break;
-//mdk-stage1// 	default:
-//mdk-stage1// 	    errflg = 1; break;
-//mdk-stage1// 	}
-//mdk-stage1//     }
-//mdk-stage1//     if (errflg || (optind < argc)) {
-//mdk-stage1// 	fprintf(stderr, "usage: %s [-t tcic_base] [-v] [-m]\n", argv[0]);
-//mdk-stage1// 	exit(EXIT_FAILURE);
-//mdk-stage1//     }
-//mdk-stage1// 
-//mdk-stage1// #ifdef CONFIG_PCI
-//mdk-stage1//     if (pci_probe(verbose, module) == 0)
-//mdk-stage1// 	exit(EXIT_SUCCESS);
-//mdk-stage1// #endif
-//mdk-stage1// #ifdef CONFIG_ISA
-//mdk-stage1//     if (i365_probe(verbose, module) == 0)
-//mdk-stage1// 	exit(EXIT_SUCCESS);
-//mdk-stage1//     else if (tcic_probe(verbose, module, tcic_base) == 0)
-//mdk-stage1// 	exit(EXIT_SUCCESS);
-//mdk-stage1// #endif
-//mdk-stage1//     exit(EXIT_FAILURE);
-//mdk-stage1//     return 0;
-//mdk-stage1// }
-
-
-char * pcmcia_probe(void)
-{
-	if (!pci_probe())
-		return driver;
-	else if (!i365_probe())
-		return "i82365";
-	else if (!tcic_probe())
-		return "tcic";
-	else
-		return NULL;
-}
diff --git a/mdk-stage1/pcmcia_/tcic.h b/mdk-stage1/pcmcia_/tcic.h
deleted file mode 100644
index cad193885..000000000
--- a/mdk-stage1/pcmcia_/tcic.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * tcic.h 1.15 2001/08/24 12:15:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_TCIC_H
-#define _LINUX_TCIC_H
-
-#define TCIC_BASE		0x240
-
-/* offsets of registers from TCIC_BASE */
-#define TCIC_DATA		0x00
-#define TCIC_ADDR		0x02
-#define TCIC_SCTRL		0x06
-#define TCIC_SSTAT		0x07
-#define TCIC_MODE		0x08
-#define TCIC_PWR		0x09
-#define TCIC_EDC		0x0A
-#define TCIC_ICSR		0x0C
-#define TCIC_IENA		0x0D
-#define TCIC_AUX		0x0E
-
-#define TCIC_SS_SHFT		12
-#define TCIC_SS_MASK		0x7000
-
-/* Flags for TCIC_ADDR */
-#define TCIC_ADR2_REG		0x8000
-#define TCIC_ADR2_INDREG	0x0800
-
-#define TCIC_ADDR_REG		0x80000000
-#define TCIC_ADDR_SS_SHFT	(TCIC_SS_SHFT+16)
-#define TCIC_ADDR_SS_MASK	(TCIC_SS_MASK<<16)
-#define TCIC_ADDR_INDREG	0x08000000
-#define TCIC_ADDR_IO		0x04000000
-#define TCIC_ADDR_MASK		0x03ffffff
-
-/* Flags for TCIC_SCTRL */
-#define TCIC_SCTRL_ENA		0x01
-#define TCIC_SCTRL_INCMODE	0x18
-#define TCIC_SCTRL_INCMODE_HOLD	0x00
-#define TCIC_SCTRL_INCMODE_WORD	0x08
-#define TCIC_SCTRL_INCMODE_REG	0x10
-#define TCIC_SCTRL_INCMODE_AUTO	0x18
-#define TCIC_SCTRL_EDCSUM	0x20
-#define TCIC_SCTRL_RESET	0x80
-
-/* Flags for TCIC_SSTAT */
-#define TCIC_SSTAT_6US		0x01
-#define TCIC_SSTAT_10US		0x02
-#define TCIC_SSTAT_PROGTIME	0x04
-#define TCIC_SSTAT_LBAT1	0x08
-#define TCIC_SSTAT_LBAT2	0x10
-#define TCIC_SSTAT_RDY		0x20	/* Inverted */
-#define TCIC_SSTAT_WP		0x40
-#define TCIC_SSTAT_CD		0x80	/* Card detect */
-
-/* Flags for TCIC_MODE */
-#define TCIC_MODE_PGMMASK	0x1f
-#define TCIC_MODE_NORMAL	0x00
-#define TCIC_MODE_PGMWR		0x01
-#define TCIC_MODE_PGMRD		0x02
-#define TCIC_MODE_PGMCE		0x04
-#define TCIC_MODE_PGMDBW	0x08
-#define TCIC_MODE_PGMWORD	0x10
-#define TCIC_MODE_AUXSEL_MASK	0xe0
-
-/* Registers accessed through TCIC_AUX, by setting TCIC_MODE */
-#define TCIC_AUX_TCTL		(0<<5)
-#define TCIC_AUX_PCTL		(1<<5)
-#define TCIC_AUX_WCTL		(2<<5)
-#define TCIC_AUX_EXTERN		(3<<5)
-#define TCIC_AUX_PDATA		(4<<5)
-#define TCIC_AUX_SYSCFG		(5<<5)
-#define TCIC_AUX_ILOCK		(6<<5)
-#define TCIC_AUX_TEST		(7<<5)
-
-/* Flags for TCIC_PWR */
-#define TCIC_PWR_VCC(sock)	(0x01<<(sock))
-#define TCIC_PWR_VCC_MASK	0x03
-#define TCIC_PWR_VPP(sock)	(0x08<<(sock))
-#define TCIC_PWR_VPP_MASK	0x18
-#define TCIC_PWR_CLIMENA	0x40
-#define TCIC_PWR_CLIMSTAT	0x80
-
-/* Flags for TCIC_ICSR */
-#define TCIC_ICSR_CLEAR		0x01
-#define TCIC_ICSR_SET		0x02
-#define TCIC_ICSR_JAM		(TCIC_ICSR_CLEAR|TCIC_ICSR_SET)
-#define TCIC_ICSR_STOPCPU	0x04
-#define TCIC_ICSR_ILOCK		0x08
-#define TCIC_ICSR_PROGTIME	0x10
-#define TCIC_ICSR_ERR		0x20
-#define TCIC_ICSR_CDCHG		0x40
-#define TCIC_ICSR_IOCHK		0x80
-
-/* Flags for TCIC_IENA */
-#define TCIC_IENA_CFG_MASK	0x03
-#define TCIC_IENA_CFG_OFF	0x00	/* disabled */
-#define TCIC_IENA_CFG_OD	0x01	/* active low, open drain */
-#define TCIC_IENA_CFG_LOW	0x02	/* active low, totem pole */
-#define TCIC_IENA_CFG_HIGH	0x03	/* active high, totem pole */
-#define TCIC_IENA_ILOCK		0x08
-#define TCIC_IENA_PROGTIME	0x10
-#define TCIC_IENA_ERR		0x20	/* overcurrent or iochk */
-#define TCIC_IENA_CDCHG		0x40
-
-/* Flags for TCIC_AUX_WCTL */
-#define TCIC_WAIT_COUNT_MASK	0x001f
-#define TCIC_WAIT_ASYNC		0x0020
-#define TCIC_WAIT_SENSE		0x0040
-#define TCIC_WAIT_SRC		0x0080
-#define TCIC_WCTL_WR		0x0100
-#define TCIC_WCTL_RD		0x0200
-#define TCIC_WCTL_CE		0x0400
-#define TCIC_WCTL_LLBAT1	0x0800
-#define TCIC_WCTL_LLBAT2	0x1000
-#define TCIC_WCTL_LRDY		0x2000
-#define TCIC_WCTL_LWP		0x4000
-#define TCIC_WCTL_LCD		0x8000
-
-/* Flags for TCIC_AUX_SYSCFG */
-#define TCIC_SYSCFG_IRQ_MASK	0x000f
-#define TCIC_SYSCFG_MCSFULL	0x0010
-#define TCIC_SYSCFG_IO1723	0x0020
-#define TCIC_SYSCFG_MCSXB	0x0040
-#define TCIC_SYSCFG_ICSXB	0x0080
-#define TCIC_SYSCFG_NOPDN	0x0100
-#define TCIC_SYSCFG_MPSEL_SHFT	9
-#define TCIC_SYSCFG_MPSEL_MASK	0x0e00
-#define TCIC_SYSCFG_MPSENSE	0x2000
-#define TCIC_SYSCFG_AUTOBUSY	0x4000
-#define TCIC_SYSCFG_ACC		0x8000
-
-#define TCIC_ILOCK_OUT		0x01
-#define TCIC_ILOCK_SENSE	0x02
-#define TCIC_ILOCK_CRESET	0x04
-#define TCIC_ILOCK_CRESENA	0x08
-#define TCIC_ILOCK_CWAIT	0x10
-#define TCIC_ILOCK_CWAITSNS	0x20
-#define TCIC_ILOCK_HOLD_MASK	0xc0
-#define TCIC_ILOCK_HOLD_CCLK	0xc0
-
-#define TCIC_ILOCKTEST_ID_SH	8
-#define TCIC_ILOCKTEST_ID_MASK	0x7f00
-#define TCIC_ILOCKTEST_MCIC_1	0x8000
-
-#define TCIC_ID_DB86082		0x02
-#define TCIC_ID_DB86082A	0x03
-#define TCIC_ID_DB86084		0x04
-#define TCIC_ID_DB86084A	0x08
-#define TCIC_ID_DB86072		0x15
-#define TCIC_ID_DB86184		0x14
-#define TCIC_ID_DB86082B	0x17
-
-#define TCIC_TEST_DIAG		0x8000
-
-/*
- * Indirectly addressed registers
- */
-
-#define TCIC_SCF1(sock)	((sock)<<3)
-#define TCIC_SCF2(sock) (((sock)<<3)+2)
-
-/* Flags for SCF1 */
-#define TCIC_SCF1_IRQ_MASK	0x000f
-#define TCIC_SCF1_IRQ_OFF	0x0000
-#define TCIC_SCF1_IRQOC		0x0010
-#define TCIC_SCF1_PCVT		0x0020
-#define TCIC_SCF1_IRDY		0x0040
-#define TCIC_SCF1_ATA		0x0080
-#define TCIC_SCF1_DMA_SHIFT	8
-#define TCIC_SCF1_DMA_MASK	0x0700
-#define TCIC_SCF1_DMA_OFF	0
-#define TCIC_SCF1_DREQ2		2
-#define TCIC_SCF1_IOSTS		0x0800
-#define TCIC_SCF1_SPKR		0x1000
-#define TCIC_SCF1_FINPACK	0x2000
-#define TCIC_SCF1_DELWR		0x4000
-#define TCIC_SCF1_HD7IDE	0x8000
-
-/* Flags for SCF2 */
-#define TCIC_SCF2_RI		0x0001
-#define TCIC_SCF2_IDBR		0x0002
-#define TCIC_SCF2_MDBR		0x0004
-#define TCIC_SCF2_MLBAT1	0x0008
-#define TCIC_SCF2_MLBAT2	0x0010
-#define TCIC_SCF2_MRDY		0x0020
-#define TCIC_SCF2_MWP		0x0040
-#define TCIC_SCF2_MCD		0x0080
-#define TCIC_SCF2_MALL		0x00f8
-
-/* Indirect addresses for memory window registers */
-#define TCIC_MWIN(sock,map)	(0x100+(((map)+((sock)<<2))<<3))
-#define TCIC_MBASE_X		2
-#define TCIC_MMAP_X		4
-#define TCIC_MCTL_X		6
-
-#define TCIC_MBASE_4K_BIT	0x4000
-#define TCIC_MBASE_HA_SHFT	12
-#define TCIC_MBASE_HA_MASK	0x0fff
-
-#define TCIC_MMAP_REG		0x8000
-#define TCIC_MMAP_CA_SHFT	12
-#define TCIC_MMAP_CA_MASK	0x3fff
-
-#define TCIC_MCTL_WSCNT_MASK	0x001f
-#define TCIC_MCTL_WCLK		0x0020
-#define TCIC_MCTL_WCLK_CCLK	0x0000
-#define TCIC_MCTL_WCLK_BCLK	0x0020
-#define TCIC_MCTL_QUIET		0x0040
-#define TCIC_MCTL_WP		0x0080
-#define TCIC_MCTL_ACC		0x0100
-#define TCIC_MCTL_KE		0x0200
-#define TCIC_MCTL_EDC		0x0400
-#define TCIC_MCTL_B8		0x0800
-#define TCIC_MCTL_SS_SHFT	TCIC_SS_SHFT
-#define TCIC_MCTL_SS_MASK	TCIC_SS_MASK
-#define TCIC_MCTL_ENA		0x8000
-
-/* Indirect addresses for I/O window registers */
-#define TCIC_IWIN(sock,map)	(0x200+(((map)+((sock)<<1))<<2))
-#define TCIC_IBASE_X		0
-#define TCIC_ICTL_X		2
-
-#define TCIC_ICTL_WSCNT_MASK	TCIC_MCTL_WSCNT_MASK
-#define TCIC_ICTL_QUIET		TCIC_MCTL_QUIET
-#define TCIC_ICTL_1K		0x0080
-#define TCIC_ICTL_PASS16	0x0100
-#define TCIC_ICTL_ACC		TCIC_MCTL_ACC
-#define TCIC_ICTL_TINY		0x0200
-#define TCIC_ICTL_B16		0x0400
-#define TCIC_ICTL_B8		TCIC_MCTL_B8
-#define TCIC_ICTL_BW_MASK	(TCIC_ICTL_B16|TCIC_ICTL_B8)
-#define TCIC_ICTL_BW_DYN	0
-#define TCIC_ICTL_BW_8		TCIC_ICTL_B8
-#define TCIC_ICTL_BW_16		TCIC_ICTL_B16
-#define TCIC_ICTL_BW_ATA	(TCIC_ICTL_B16|TCIC_ICTL_B8)
-#define TCIC_ICTL_SS_SHFT	TCIC_SS_SHFT
-#define TCIC_ICTL_SS_MASK	TCIC_SS_MASK
-#define TCIC_ICTL_ENA		TCIC_MCTL_ENA
-
-#endif /* _LINUX_TCIC_H */
diff --git a/mdk-stage1/pcmcia_/version.h b/mdk-stage1/pcmcia_/version.h
deleted file mode 100644
index 3be8f28bc..000000000
--- a/mdk-stage1/pcmcia_/version.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* version.h 1.101 2001/08/09 12:29:14 (David Hinds) */
-
-#define CS_RELEASE "3.1.29"
-#define CS_RELEASE_CODE 0x311d
diff --git a/mdk-stage1/pcmcia_/vg468.h b/mdk-stage1/pcmcia_/vg468.h
deleted file mode 100644
index 23890cd07..000000000
--- a/mdk-stage1/pcmcia_/vg468.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * vg468.h 1.14 2001/08/24 12:15:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_VG468_H
-#define _LINUX_VG468_H
-
-/* Special bit in I365_IDENT used for Vadem chip detection */
-#define I365_IDENT_VADEM	0x08
-
-/* Special definitions in I365_POWER */
-#define VG468_VPP2_MASK		0x0c
-#define VG468_VPP2_5V		0x04
-#define VG468_VPP2_12V		0x08
-
-/* Unique Vadem registers */
-#define VG469_VSENSE		0x1f	/* Card voltage sense */
-#define VG469_VSELECT		0x2f	/* Card voltage select */
-#define VG468_CTL		0x38	/* Control register */
-#define VG468_TIMER		0x39	/* Timer control */
-#define VG468_MISC		0x3a	/* Miscellaneous */
-#define VG468_GPIO_CFG		0x3b	/* GPIO configuration */
-#define VG469_EXT_MODE		0x3c	/* Extended mode register */
-#define VG468_SELECT		0x3d	/* Programmable chip select */
-#define VG468_SELECT_CFG	0x3e	/* Chip select configuration */
-#define VG468_ATA		0x3f	/* ATA control */
-
-/* Flags for VG469_VSENSE */
-#define VG469_VSENSE_A_VS1	0x01
-#define VG469_VSENSE_A_VS2	0x02
-#define VG469_VSENSE_B_VS1	0x04
-#define VG469_VSENSE_B_VS2	0x08
-
-/* Flags for VG469_VSELECT */
-#define VG469_VSEL_VCC		0x03
-#define VG469_VSEL_5V		0x00
-#define VG469_VSEL_3V		0x03
-#define VG469_VSEL_MAX		0x0c
-#define VG469_VSEL_EXT_STAT	0x10
-#define VG469_VSEL_EXT_BUS	0x20
-#define VG469_VSEL_MIXED	0x40
-#define VG469_VSEL_ISA		0x80
-
-/* Flags for VG468_CTL */
-#define VG468_CTL_SLOW		0x01	/* 600ns memory timing */
-#define VG468_CTL_ASYNC		0x02	/* Asynchronous bus clocking */
-#define VG468_CTL_TSSI		0x08	/* Tri-state some outputs */
-#define VG468_CTL_DELAY		0x10	/* Card detect debounce */
-#define VG468_CTL_INPACK	0x20	/* Obey INPACK signal? */
-#define VG468_CTL_POLARITY	0x40	/* VCCEN polarity */
-#define VG468_CTL_COMPAT	0x80	/* Compatibility stuff */
-
-#define VG469_CTL_WS_COMPAT	0x04	/* Wait state compatibility */
-#define VG469_CTL_STRETCH	0x10	/* LED stretch */
-
-/* Flags for VG468_TIMER */
-#define VG468_TIMER_ZEROPWR	0x10	/* Zero power control */
-#define VG468_TIMER_SIGEN	0x20	/* Power up */
-#define VG468_TIMER_STATUS	0x40	/* Activity timer status */
-#define VG468_TIMER_RES		0x80	/* Timer resolution */
-#define VG468_TIMER_MASK	0x0f	/* Activity timer timeout */
-
-/* Flags for VG468_MISC */
-#define VG468_MISC_GPIO		0x04	/* General-purpose IO */
-#define VG468_MISC_DMAWSB	0x08	/* DMA wait state control */
-#define VG469_MISC_LEDENA	0x10	/* LED enable */
-#define VG468_MISC_VADEMREV	0x40	/* Vadem revision control */
-#define VG468_MISC_UNLOCK	0x80	/* Unique register lock */
-
-/* Flags for VG469_EXT_MODE_A */
-#define VG469_MODE_VPPST	0x03	/* Vpp steering control */
-#define VG469_MODE_INT_SENSE	0x04	/* Internal voltage sense */
-#define VG469_MODE_CABLE	0x08
-#define VG469_MODE_COMPAT	0x10	/* i82365sl B or DF step */
-#define VG469_MODE_TEST		0x20
-#define VG469_MODE_RIO		0x40	/* Steer RIO to INTR? */
-
-/* Flags for VG469_EXT_MODE_B */
-#define VG469_MODE_B_3V		0x01	/* 3.3v for socket B */
-
-#endif /* _LINUX_VG468_H */
diff --git a/mdk-stage1/pcmcia_/yacc_config.c b/mdk-stage1/pcmcia_/yacc_config.c
deleted file mode 100644
index 2262d52f3..000000000
--- a/mdk-stage1/pcmcia_/yacc_config.c
+++ /dev/null
@@ -1,1015 +0,0 @@
-#define YYBYACC 1
-#define YYMAJOR 1
-#define YYMINOR 9
-#define yyclearin (yychar=(-1))
-#define yyerrok (yyerrflag=0)
-#define YYRECOVERING (yyerrflag!=0)
-#define YYPREFIX "yy"
-#line 2 "yacc_config.y"
-/*
- * yacc_config.y 1.53 2001/08/24 12:21:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License. 
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above.  If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL.  If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-    
-#include <stdlib.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <string.h>
-#include <syslog.h>
-#include <sys/types.h>
-
-#include <pcmcia_/cs_types.h>
-#include <pcmcia_/cs.h>
-#include <pcmcia_/cistpl.h>
-#include <pcmcia_/ds.h>
-    
-#include "cardmgr.h"
-
-/* If bison: generate nicer error messages */ 
-#define YYERROR_VERBOSE 1
- 
-/* from lex_config, for nice error messages */
-extern char *current_file;
-extern int current_lineno;
-
-void yyerror(char *msg, ...);
-
-static int add_binding(card_info_t *card, char *name, int fn);
-static int add_module(device_info_t *card, char *name);
-
-#line 65 "yacc_config.y"
-typedef union {
-    char *str;
-    unsigned long num;
-    struct device_info_t *device;
-    struct card_info_t *card;
-    struct mtd_ident_t *mtd;
-    struct adjust_list_t *adjust;
-} YYSTYPE;
-#line 77 "y.tab.c"
-#define DEVICE 257
-#define CARD 258
-#define ANONYMOUS 259
-#define TUPLE 260
-#define MANFID 261
-#define VERSION 262
-#define FUNCTION 263
-#define PCI 264
-#define BIND 265
-#define CIS 266
-#define TO 267
-#define NEEDS_MTD 268
-#define MODULE 269
-#define OPTS 270
-#define CLASS 271
-#define REGION 272
-#define JEDEC 273
-#define DTYPE 274
-#define DEFAULT 275
-#define MTD 276
-#define INCLUDE 277
-#define EXCLUDE 278
-#define RESERVE 279
-#define IRQ_NO 280
-#define PORT 281
-#define MEMORY 282
-#define STRING 283
-#define NUMBER 284
-#define YYERRCODE 256
-short yylhs[] = {                                        -1,
-    0,    0,    0,    0,    0,    0,    0,    0,    1,    1,
-    1,    1,    2,    2,    2,    3,    3,    3,    3,    7,
-    7,    7,    7,    7,    7,    7,    7,    7,    8,    9,
-   10,   11,   12,   12,   13,   15,   14,   14,   14,   14,
-    4,   21,    5,    5,    5,    6,   16,   16,   16,   16,
-   18,   17,   19,   20,   20,   22,
-};
-short yylen[] = {                                         2,
-    0,    2,    2,    2,    2,    2,    2,    2,    2,    2,
-    2,    3,    2,    4,    4,    2,    1,    1,    1,    2,
-    1,    1,    1,    1,    1,    1,    1,    1,    2,    7,
-    5,    5,    3,    3,    3,    3,    3,    5,    3,    5,
-    2,    4,    3,    3,    3,    3,    2,    1,    1,    1,
-    3,    4,    2,    3,    3,    4,
-};
-short yydefred[] = {                                      1,
-    0,    8,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,   17,    0,   19,    0,   21,   22,   23,   24,
-    0,   26,    0,   28,    0,   49,   48,   50,    0,    6,
-    7,   16,   20,    0,   47,    0,    0,    0,    0,    9,
-   10,   11,    0,   41,    0,    0,    0,    0,   29,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-   53,    0,    0,    0,    0,   13,    0,    0,   12,   43,
-   46,   44,   45,    0,    0,   33,   35,    0,    0,   36,
-   34,    0,    0,   51,   54,   55,   42,   56,    0,    0,
-    0,    0,    0,    0,    0,   52,   14,   15,    0,   31,
-   32,   38,   40,    0,   30,
-};
-short yydgoto[] = {                                       1,
-   11,   40,   12,   13,   14,   15,   16,   17,   18,   19,
-   20,   21,   22,   23,   24,   25,   26,   27,   28,   29,
-   30,   31,
-};
-short yysindex[] = {                                      0,
- -250,    0, -279, -278, -274, -265, -259, -242, -242, -242,
-  -10, -248,    0,  -44,    0, -249,    0,    0,    0,    0,
-   -9,    0,   -3,    0, -243,    0,    0,    0, -233,    0,
-    0,    0,    0, -228,    0, -227, -240, -238, -237,    0,
-    0,    0, -242,    0, -235, -232, -231, -230,    0, -234,
- -229, -226, -225, -224, -222, -221, -220, -219, -218, -217,
-    0, -215, -213, -212, -211,    0,    9,   11,    0,    0,
-    0,    0,    0,   14,   21,    0,    0,   30, -192,    0,
-    0, -191, -207,    0,    0,    0,    0,    0, -206, -205,
- -204, -203, -202, -201, -200,    0,    0,    0,   41,    0,
-    0,    0,    0, -197,    0,
-};
-short yyrindex[] = {                                      0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-  107,  149,    0,   90,    0,  124,    0,    0,    0,    0,
-   49,    0,   73,    0,    0,    0,    0,    0,  141,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    1,    0,
-    0,   25,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,
-};
-short yygindex[] = {                                      0,
-    0,   -7,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,
-};
-#define YYTABLESIZE 428
-short yytable[] = {                                      48,
-   37,   41,   42,   32,   33,    2,    3,    4,   34,   49,
-   50,   51,   52,   53,   54,   55,   56,   35,    5,   44,
-   45,    6,   46,   36,   39,    7,    8,    9,   10,   59,
-   60,   61,   62,   43,   57,   69,   63,   37,   38,   39,
-   58,   64,   65,   66,   37,   67,   68,   70,   25,   74,
-   71,   72,   73,   89,   75,   90,   76,   91,   77,   78,
-   79,   80,   81,   82,   92,   83,   84,   85,   39,   86,
-   87,   88,   27,   93,   94,   95,   96,   97,   98,   99,
-  100,  101,  102,  103,  104,  105,    0,    0,    0,   18,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    2,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    5,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    4,    0,    0,    0,    0,    0,    0,    0,    3,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,   47,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,   37,   37,   37,   37,
-   37,   37,   37,   37,   37,   37,   37,    0,    0,   37,
-    0,    0,   37,    0,    0,    0,   37,   37,   37,   37,
-   39,   39,   39,   39,   39,   39,   39,   39,   39,   39,
-   39,    0,    0,   39,    0,    0,   39,    0,    0,    0,
-   39,   39,   39,   39,   25,   25,   25,   25,   25,   25,
-   25,   25,   25,   25,   25,    0,    0,   25,    0,    0,
-   25,    0,    0,    0,   25,   25,   25,   25,   27,   27,
-   27,   27,   27,   27,   27,   27,   27,   27,   27,    0,
-    0,   27,    0,    0,   27,   18,   18,   18,   27,   27,
-   27,   27,    0,    0,    0,    0,    0,   18,   18,    0,
-   18,   18,    2,    2,    2,   18,   18,   18,   18,    0,
-    0,    0,    0,    0,    0,    2,    0,    0,    2,    5,
-    5,    5,    2,    2,    2,    2,    0,    0,    0,    0,
-    0,    0,    5,    0,    0,    5,    4,    4,    4,    5,
-    5,    5,    5,    0,    3,    3,    3,    0,    0,    4,
-    0,    0,    4,    0,    0,    0,    4,    4,    4,    4,
-    3,    0,    0,    0,    3,    3,    3,    3,
-};
-short yycheck[] = {                                      44,
-    0,    9,   10,  283,  283,  256,  257,  258,  283,  259,
-  260,  261,  262,  263,  264,  265,  266,  283,  269,  268,
-  269,  272,  271,  283,    0,  276,  277,  278,  279,  273,
-  274,  275,  276,   44,   44,   43,  270,  280,  281,  282,
-   44,  270,  270,  284,   44,  284,  284,  283,    0,  284,
-  283,  283,  283,   45,  284,   45,  283,   44,  284,  284,
-  283,  283,  283,  283,   44,  284,  284,  283,   44,  283,
-  283,  283,    0,   44,  267,  267,  284,  284,  284,  284,
-  284,  284,  284,  284,   44,  283,   -1,   -1,   -1,    0,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,    0,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,    0,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-    0,   -1,   -1,   -1,   -1,   -1,   -1,   -1,    0,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,  270,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,  256,  257,  258,  259,
-  260,  261,  262,  263,  264,  265,  266,   -1,   -1,  269,
-   -1,   -1,  272,   -1,   -1,   -1,  276,  277,  278,  279,
-  256,  257,  258,  259,  260,  261,  262,  263,  264,  265,
-  266,   -1,   -1,  269,   -1,   -1,  272,   -1,   -1,   -1,
-  276,  277,  278,  279,  256,  257,  258,  259,  260,  261,
-  262,  263,  264,  265,  266,   -1,   -1,  269,   -1,   -1,
-  272,   -1,   -1,   -1,  276,  277,  278,  279,  256,  257,
-  258,  259,  260,  261,  262,  263,  264,  265,  266,   -1,
-   -1,  269,   -1,   -1,  272,  256,  257,  258,  276,  277,
-  278,  279,   -1,   -1,   -1,   -1,   -1,  268,  269,   -1,
-  271,  272,  256,  257,  258,  276,  277,  278,  279,   -1,
-   -1,   -1,   -1,   -1,   -1,  269,   -1,   -1,  272,  256,
-  257,  258,  276,  277,  278,  279,   -1,   -1,   -1,   -1,
-   -1,   -1,  269,   -1,   -1,  272,  256,  257,  258,  276,
-  277,  278,  279,   -1,  256,  257,  258,   -1,   -1,  269,
-   -1,   -1,  272,   -1,   -1,   -1,  276,  277,  278,  279,
-  272,   -1,   -1,   -1,  276,  277,  278,  279,
-};
-#define YYFINAL 1
-#ifndef YYDEBUG
-#define YYDEBUG 0
-#endif
-#define YYMAXTOKEN 284
-#if YYDEBUG
-char *yyname[] = {
-"end-of-file",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,"','","'-'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"DEVICE","CARD",
-"ANONYMOUS","TUPLE","MANFID","VERSION","FUNCTION","PCI","BIND","CIS","TO",
-"NEEDS_MTD","MODULE","OPTS","CLASS","REGION","JEDEC","DTYPE","DEFAULT","MTD",
-"INCLUDE","EXCLUDE","RESERVE","IRQ_NO","PORT","MEMORY","STRING","NUMBER",
-};
-char *yyrule[] = {
-"$accept : list",
-"list :",
-"list : list adjust",
-"list : list device",
-"list : list mtd",
-"list : list card",
-"list : list opts",
-"list : list mtd_opts",
-"list : list error",
-"adjust : INCLUDE resource",
-"adjust : EXCLUDE resource",
-"adjust : RESERVE resource",
-"adjust : adjust ',' resource",
-"resource : IRQ_NO NUMBER",
-"resource : PORT NUMBER '-' NUMBER",
-"resource : MEMORY NUMBER '-' NUMBER",
-"device : DEVICE STRING",
-"device : needs_mtd",
-"device : module",
-"device : class",
-"card : CARD STRING",
-"card : anonymous",
-"card : tuple",
-"card : manfid",
-"card : pci",
-"card : version",
-"card : function",
-"card : bind",
-"card : cis",
-"anonymous : card ANONYMOUS",
-"tuple : card TUPLE NUMBER ',' NUMBER ',' STRING",
-"manfid : card MANFID NUMBER ',' NUMBER",
-"pci : card PCI NUMBER ',' NUMBER",
-"version : card VERSION STRING",
-"version : version ',' STRING",
-"function : card FUNCTION NUMBER",
-"cis : card CIS STRING",
-"bind : card BIND STRING",
-"bind : card BIND STRING TO NUMBER",
-"bind : bind ',' STRING",
-"bind : bind ',' STRING TO NUMBER",
-"needs_mtd : device NEEDS_MTD",
-"opts : MODULE STRING OPTS STRING",
-"module : device MODULE STRING",
-"module : module OPTS STRING",
-"module : module ',' STRING",
-"class : device CLASS STRING",
-"region : REGION STRING",
-"region : dtype",
-"region : jedec",
-"region : default",
-"dtype : region DTYPE NUMBER",
-"jedec : region JEDEC NUMBER NUMBER",
-"default : region DEFAULT",
-"mtd : region MTD STRING",
-"mtd : mtd OPTS STRING",
-"mtd_opts : MTD STRING OPTS STRING",
-};
-#endif
-#ifdef YYSTACKSIZE
-#undef YYMAXDEPTH
-#define YYMAXDEPTH YYSTACKSIZE
-#else
-#ifdef YYMAXDEPTH
-#define YYSTACKSIZE YYMAXDEPTH
-#else
-#define YYSTACKSIZE 500
-#define YYMAXDEPTH 500
-#endif
-#endif
-int yydebug;
-int yynerrs;
-int yyerrflag;
-int yychar;
-short *yyssp;
-YYSTYPE *yyvsp;
-YYSTYPE yyval;
-YYSTYPE yylval;
-short yyss[YYSTACKSIZE];
-YYSTYPE yyvs[YYSTACKSIZE];
-#define yystacksize YYSTACKSIZE
-#line 468 "yacc_config.y"
-void yyerror(char *msg, ...)
-{
-     va_list ap;
-     char str[256];
-
-     va_start(ap, msg);
-     sprintf(str, "config error, file '%s' line %d: ",
-	     current_file, current_lineno);
-     vsprintf(str+strlen(str), msg, ap);
-#if YYDEBUG
-     fprintf(stderr, "%s\n", str);
-#else
-     syslog(LOG_ERR, "%s", str);
-#endif
-     va_end(ap);
-}
-
-static int add_binding(card_info_t *card, char *name, int fn)
-{
-    device_info_t *dev = root_device;
-    if (card->bindings == MAX_BINDINGS) {
-	yyerror("too many bindings\n");
-	return -1;
-    }
-    for (; dev; dev = dev->next)
-	if (strcmp((char *)dev->dev_info, name) == 0) break;
-    if (dev == NULL) {
-	yyerror("unknown device: %s", name);
-	return -1;
-    }
-    card->device[card->bindings] = dev;
-    card->dev_fn[card->bindings] = fn;
-    card->bindings++;
-    free(name);
-    return 0;
-}
-
-static int add_module(device_info_t *dev, char *name)
-{
-    if (dev->modules == MAX_MODULES) {
-	yyerror("too many modules");
-	return -1;
-    }
-    dev->module[dev->modules] = name;
-    dev->opts[dev->modules] = NULL;
-    dev->modules++;
-    return 0;
-}
-
-#if YYDEBUG
-adjust_list_t *root_adjust = NULL;
-device_info_t *root_device = NULL;
-card_info_t *root_card = NULL, *blank_card = NULL, *root_func = NULL;
-mtd_ident_t *root_mtd = NULL, *default_mtd = NULL;
-
-void main(int argc, char *argv[])
-{
-    yydebug = 1;
-    if (argc > 1)
-	parse_configfile(argv[1]);
-}
-#endif
-#line 426 "y.tab.c"
-#define YYABORT goto yyabort
-#define YYREJECT goto yyabort
-#define YYACCEPT goto yyaccept
-#define YYERROR goto yyerrlab
-int yylex(void);
-int
-yyparse()
-{
-    register int yym, yyn, yystate;
-#if YYDEBUG
-    register char *yys;
-    extern char *getenv();
-
-    if (yys = getenv("YYDEBUG"))
-    {
-        yyn = *yys;
-        if (yyn >= '0' && yyn <= '9')
-            yydebug = yyn - '0';
-    }
-#endif
-
-    yynerrs = 0;
-    yyerrflag = 0;
-    yychar = (-1);
-
-    yyssp = yyss;
-    yyvsp = yyvs;
-    *yyssp = yystate = 0;
-
-yyloop:
-    if ((yyn = yydefred[yystate])) goto yyreduce;
-    if (yychar < 0)
-    {
-        if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
-        if (yydebug)
-        {
-            yys = 0;
-            if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-            if (!yys) yys = "illegal-symbol";
-            printf("%sdebug: state %d, reading %d (%s)\n",
-                    YYPREFIX, yystate, yychar, yys);
-        }
-#endif
-    }
-    if ((yyn = yysindex[yystate]) && (yyn += yychar) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
-    {
-#if YYDEBUG
-        if (yydebug)
-            printf("%sdebug: state %d, shifting to state %d\n",
-                    YYPREFIX, yystate, yytable[yyn]);
-#endif
-        if (yyssp >= yyss + yystacksize - 1)
-        {
-            goto yyoverflow;
-        }
-        *++yyssp = yystate = yytable[yyn];
-        *++yyvsp = yylval;
-        yychar = (-1);
-        if (yyerrflag > 0)  --yyerrflag;
-        goto yyloop;
-    }
-    if ((yyn = yyrindex[yystate]) && (yyn += yychar) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
-    {
-        yyn = yytable[yyn];
-        goto yyreduce;
-    }
-    if (yyerrflag) goto yyinrecovery;
-    yyerror("syntax error");
-#ifdef lint
-    goto yyerrlab;
-#endif
-yyerrlab:
-    ++yynerrs;
-yyinrecovery:
-    if (yyerrflag < 3)
-    {
-        yyerrflag = 3;
-        for (;;)
-        {
-            if ((yyn = yysindex[*yyssp]) && (yyn += YYERRCODE) >= 0 &&
-                    yyn <= YYTABLESIZE && yycheck[yyn] == YYERRCODE)
-            {
-#if YYDEBUG
-                if (yydebug)
-                    printf("%sdebug: state %d, error recovery shifting\
- to state %d\n", YYPREFIX, *yyssp, yytable[yyn]);
-#endif
-                if (yyssp >= yyss + yystacksize - 1)
-                {
-                    goto yyoverflow;
-                }
-                *++yyssp = yystate = yytable[yyn];
-                *++yyvsp = yylval;
-                goto yyloop;
-            }
-            else
-            {
-#if YYDEBUG
-                if (yydebug)
-                    printf("%sdebug: error recovery discarding state %d\n",
-                            YYPREFIX, *yyssp);
-#endif
-                if (yyssp <= yyss) goto yyabort;
-                --yyssp;
-                --yyvsp;
-            }
-        }
-    }
-    else
-    {
-        if (yychar == 0) goto yyabort;
-#if YYDEBUG
-        if (yydebug)
-        {
-            yys = 0;
-            if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-            if (!yys) yys = "illegal-symbol";
-            printf("%sdebug: state %d, error recovery discards token %d (%s)\n",
-                    YYPREFIX, yystate, yychar, yys);
-        }
-#endif
-        yychar = (-1);
-        goto yyloop;
-    }
-yyreduce:
-#if YYDEBUG
-    if (yydebug)
-        printf("%sdebug: state %d, reducing by rule %d (%s)\n",
-                YYPREFIX, yystate, yyn, yyrule[yyn]);
-#endif
-    yym = yylen[yyn];
-    yyval = yyvsp[1-yym];
-    switch (yyn)
-    {
-case 2:
-#line 84 "yacc_config.y"
-{
-		    adjust_list_t **tail = &root_adjust;
-		    while (*tail != NULL) tail = &(*tail)->next;
-		    *tail = yyvsp[0].adjust;
-		}
-break;
-case 3:
-#line 90 "yacc_config.y"
-{
-		    yyvsp[0].device->next = root_device;
-		    root_device = yyvsp[0].device;
-		}
-break;
-case 4:
-#line 95 "yacc_config.y"
-{
-		    if (yyvsp[0].mtd->mtd_type == 0) {
-			yyerror("no ID method for this card");
-			YYERROR;
-		    }
-		    if (yyvsp[0].mtd->module == NULL) {
-			yyerror("no MTD module specified");
-			YYERROR;
-		    }
-		    yyvsp[0].mtd->next = root_mtd;
-		    root_mtd = yyvsp[0].mtd;
-		}
-break;
-case 5:
-#line 108 "yacc_config.y"
-{
-		    if (yyvsp[0].card->ident_type == 0) {
-			yyerror("no ID method for this card");
-			YYERROR;
-		    }
-		    if (yyvsp[0].card->bindings == 0) {
-			yyerror("no function bindings");
-			YYERROR;
-		    }
-		    if (yyvsp[0].card->ident_type == FUNC_IDENT) {
-			yyvsp[0].card->next = root_func;
-			root_func = yyvsp[0].card;
-		    } else {
-			yyvsp[0].card->next = root_card;
-			root_card = yyvsp[0].card;
-		    }
-		}
-break;
-case 9:
-#line 131 "yacc_config.y"
-{
-		    yyvsp[0].adjust->adj.Action = ADD_MANAGED_RESOURCE;
-		    yyval.adjust = yyvsp[0].adjust;
-		}
-break;
-case 10:
-#line 136 "yacc_config.y"
-{
-		    yyvsp[0].adjust->adj.Action = REMOVE_MANAGED_RESOURCE;
-		    yyval.adjust = yyvsp[0].adjust;
-		}
-break;
-case 11:
-#line 141 "yacc_config.y"
-{
-		    yyvsp[0].adjust->adj.Action = ADD_MANAGED_RESOURCE;
-		    yyvsp[0].adjust->adj.Attributes |= RES_RESERVED;
-		    yyval.adjust = yyvsp[0].adjust;
-		}
-break;
-case 12:
-#line 147 "yacc_config.y"
-{
-		    yyvsp[0].adjust->adj.Action = yyvsp[-2].adjust->adj.Action;
-		    yyvsp[0].adjust->adj.Attributes = yyvsp[-2].adjust->adj.Attributes;
-		    yyvsp[0].adjust->next = yyvsp[-2].adjust;
-		    yyval.adjust = yyvsp[0].adjust;
-		}
-break;
-case 13:
-#line 156 "yacc_config.y"
-{
-		    yyval.adjust = calloc(sizeof(adjust_list_t), 1);
-		    yyval.adjust->adj.Resource = RES_IRQ;
-		    yyval.adjust->adj.resource.irq.IRQ = yyvsp[0].num;
-		}
-break;
-case 14:
-#line 162 "yacc_config.y"
-{
-		    if ((yyvsp[0].num < yyvsp[-2].num) || (yyvsp[0].num > 0xffff)) {
-			yyerror("invalid port range");
-			YYERROR;
-		    }
-		    yyval.adjust = calloc(sizeof(adjust_list_t), 1);
-		    yyval.adjust->adj.Resource = RES_IO_RANGE;
-		    yyval.adjust->adj.resource.io.BasePort = yyvsp[-2].num;
-		    yyval.adjust->adj.resource.io.NumPorts = yyvsp[0].num - yyvsp[-2].num + 1;
-		}
-break;
-case 15:
-#line 173 "yacc_config.y"
-{
-		    if (yyvsp[0].num < yyvsp[-2].num) {
-			yyerror("invalid address range");
-			YYERROR;
-		    }
-		    yyval.adjust = calloc(sizeof(adjust_list_t), 1);
-		    yyval.adjust->adj.Resource = RES_MEMORY_RANGE;
-		    yyval.adjust->adj.resource.memory.Base = yyvsp[-2].num;
-		    yyval.adjust->adj.resource.memory.Size = yyvsp[0].num - yyvsp[-2].num + 1;
-		}
-break;
-case 16:
-#line 186 "yacc_config.y"
-{
-		    yyval.device = calloc(sizeof(device_info_t), 1);
-		    yyval.device->refs = 1;
-		    strcpy(yyval.device->dev_info, yyvsp[0].str);
-		    free(yyvsp[0].str);
-		}
-break;
-case 20:
-#line 198 "yacc_config.y"
-{
-		    yyval.card = calloc(sizeof(card_info_t), 1);
-		    yyval.card->refs = 1;
-		    yyval.card->name = yyvsp[0].str;
-		}
-break;
-case 29:
-#line 214 "yacc_config.y"
-{
-		    if (yyvsp[-1].card->ident_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    if (blank_card) {
-			yyerror("Anonymous card already defined");
-			YYERROR;
-		    }
-		    yyvsp[-1].card->ident_type = BLANK_IDENT;
-		    blank_card = yyvsp[-1].card;
-		}
-break;
-case 30:
-#line 229 "yacc_config.y"
-{
-		    if (yyvsp[-6].card->ident_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-6].card->ident_type = TUPLE_IDENT;
-		    yyvsp[-6].card->id.tuple.code = yyvsp[-4].num;
-		    yyvsp[-6].card->id.tuple.ofs = yyvsp[-2].num;
-		    yyvsp[-6].card->id.tuple.info = yyvsp[0].str;
-		}
-break;
-case 31:
-#line 242 "yacc_config.y"
-{
-		    if (yyvsp[-4].card->ident_type & EXCL_IDENT) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-4].card->ident_type = MANFID_IDENT;
-		    yyvsp[-4].card->manfid.manf = yyvsp[-2].num;
-		    yyvsp[-4].card->manfid.card = yyvsp[0].num;
-		}
-break;
-case 32:
-#line 253 "yacc_config.y"
-{
-		    if (yyvsp[-4].card->ident_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-4].card->ident_type = PCI_IDENT;
-		    yyvsp[-4].card->manfid.manf = yyvsp[-2].num;
-		    yyvsp[-4].card->manfid.card = yyvsp[0].num;
-		}
-break;
-case 33:
-#line 264 "yacc_config.y"
-{
-		    if (yyvsp[-2].card->ident_type & EXCL_IDENT) {
-			yyerror("ID method already defined\n");
-			YYERROR;
-		    }
-		    yyvsp[-2].card->ident_type = VERS_1_IDENT;
-		    yyvsp[-2].card->id.vers.ns = 1;
-		    yyvsp[-2].card->id.vers.pi[0] = yyvsp[0].str;
-		}
-break;
-case 34:
-#line 274 "yacc_config.y"
-{
-		    if (yyvsp[-2].card->id.vers.ns == 4) {
-			yyerror("too many version strings");
-			YYERROR;
-		    }
-		    yyvsp[-2].card->id.vers.pi[yyvsp[-2].card->id.vers.ns] = yyvsp[0].str;
-		    yyvsp[-2].card->id.vers.ns++;
-		}
-break;
-case 35:
-#line 285 "yacc_config.y"
-{
-		    if (yyvsp[-2].card->ident_type != 0) {
-			yyerror("ID method already defined\n");
-			YYERROR;
-		    }
-		    yyvsp[-2].card->ident_type = FUNC_IDENT;
-		    yyvsp[-2].card->id.func.funcid = yyvsp[0].num;
-		}
-break;
-case 36:
-#line 296 "yacc_config.y"
-{ yyvsp[-2].card->cis_file = strdup(yyvsp[0].str); }
-break;
-case 37:
-#line 300 "yacc_config.y"
-{
-		    if (add_binding(yyvsp[-2].card, yyvsp[0].str, 0) != 0)
-			YYERROR;
-		}
-break;
-case 38:
-#line 305 "yacc_config.y"
-{
-		    if (add_binding(yyvsp[-4].card, yyvsp[-2].str, yyvsp[0].num) != 0)
-			YYERROR;
-		}
-break;
-case 39:
-#line 310 "yacc_config.y"
-{
-		    if (add_binding(yyvsp[-2].card, yyvsp[0].str, 0) != 0)
-			YYERROR;
-		}
-break;
-case 40:
-#line 315 "yacc_config.y"
-{
-		    if (add_binding(yyvsp[-4].card, yyvsp[-2].str, yyvsp[0].num) != 0)
-			YYERROR;
-		}
-break;
-case 41:
-#line 322 "yacc_config.y"
-{
-		    yyvsp[-1].device->needs_mtd = 1;
-		}
-break;
-case 42:
-#line 328 "yacc_config.y"
-{
-		    device_info_t *d;
-		    int i, found = 0;
-		    for (d = root_device; d; d = d->next) {
-			for (i = 0; i < d->modules; i++)
-			    if (strcmp(yyvsp[-2].str, d->module[i]) == 0) break;
-			if (i < d->modules) {
-			    if (d->opts[i])
-				free(d->opts[i]);
-			    d->opts[i] = strdup(yyvsp[0].str);
-			    found = 1;
-			}
-		    }
-		    free(yyvsp[-2].str); free(yyvsp[0].str);
-		    if (!found) {
-			yyerror("module name not found!");
-			YYERROR;
-		    }
-		}
-break;
-case 43:
-#line 350 "yacc_config.y"
-{
-		    if (add_module(yyvsp[-2].device, yyvsp[0].str) != 0)
-			YYERROR;
-		}
-break;
-case 44:
-#line 355 "yacc_config.y"
-{
-		    if (yyvsp[-2].device->opts[yyvsp[-2].device->modules-1] == NULL) {
-			yyvsp[-2].device->opts[yyvsp[-2].device->modules-1] = yyvsp[0].str;
-		    } else {
-			yyerror("too many options");
-			YYERROR;
-		    }
-		}
-break;
-case 45:
-#line 364 "yacc_config.y"
-{
-		    if (add_module(yyvsp[-2].device, yyvsp[0].str) != 0)
-			YYERROR;
-		}
-break;
-case 46:
-#line 371 "yacc_config.y"
-{
-		    if (yyvsp[-2].device->class != NULL) {
-			yyerror("extra class string");
-			YYERROR;
-		    }
-		    yyvsp[-2].device->class = yyvsp[0].str;
-		}
-break;
-case 47:
-#line 381 "yacc_config.y"
-{
-		    yyval.mtd = calloc(sizeof(mtd_ident_t), 1);
-		    yyval.mtd->refs = 1;
-		    yyval.mtd->name = yyvsp[0].str;
-		}
-break;
-case 51:
-#line 392 "yacc_config.y"
-{
-		    if (yyvsp[-2].mtd->mtd_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-2].mtd->mtd_type = DTYPE_MTD;
-		    yyvsp[-2].mtd->dtype = yyvsp[0].num;
-		}
-break;
-case 52:
-#line 403 "yacc_config.y"
-{
-		    if (yyvsp[-3].mtd->mtd_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    yyvsp[-3].mtd->mtd_type = JEDEC_MTD;
-		    yyvsp[-3].mtd->jedec_mfr = yyvsp[-1].num;
-		    yyvsp[-3].mtd->jedec_info = yyvsp[0].num;
-		}
-break;
-case 53:
-#line 415 "yacc_config.y"
-{
-		    if (yyvsp[-1].mtd->mtd_type != 0) {
-			yyerror("ID method already defined");
-			YYERROR;
-		    }
-		    if (default_mtd) {
-			yyerror("Default MTD already defined");
-			YYERROR;
-		    }
-		    yyvsp[-1].mtd->mtd_type = DEFAULT_MTD;
-		    default_mtd = yyvsp[-1].mtd;
-		}
-break;
-case 54:
-#line 430 "yacc_config.y"
-{
-		    if (yyvsp[-2].mtd->module != NULL) {
-			yyerror("extra MTD entry");
-			YYERROR;
-		    }
-		    yyvsp[-2].mtd->module = yyvsp[0].str;
-		}
-break;
-case 55:
-#line 438 "yacc_config.y"
-{
-		    if (yyvsp[-2].mtd->opts == NULL) {
-			yyvsp[-2].mtd->opts = yyvsp[0].str;
-		    } else {
-			yyerror("too many options");
-			YYERROR;
-		    }
-		}
-break;
-case 56:
-#line 449 "yacc_config.y"
-{
-		    mtd_ident_t *m;
-		    int found = 0;
-		    for (m = root_mtd; m; m = m->next)
-			if (strcmp(yyvsp[-2].str, m->module) == 0) break;
-		    if (m) {
-			if (m->opts) free(m->opts);
-			m->opts = strdup(yyvsp[0].str);
-			found = 1;
-		    }
-		    free(yyvsp[-2].str); free(yyvsp[0].str);
-		    if (!found) {
-			yyerror("MTD name not found!");
-			YYERROR;
-		    }
-		}
-break;
-#line 966 "y.tab.c"
-    }
-    yyssp -= yym;
-    yystate = *yyssp;
-    yyvsp -= yym;
-    yym = yylhs[yyn];
-    if (yystate == 0 && yym == 0)
-    {
-#if YYDEBUG
-        if (yydebug)
-            printf("%sdebug: after reduction, shifting from state 0 to\
- state %d\n", YYPREFIX, YYFINAL);
-#endif
-        yystate = YYFINAL;
-        *++yyssp = YYFINAL;
-        *++yyvsp = yyval;
-        if (yychar < 0)
-        {
-            if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
-            if (yydebug)
-            {
-                yys = 0;
-                if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-                if (!yys) yys = "illegal-symbol";
-                printf("%sdebug: state %d, reading %d (%s)\n",
-                        YYPREFIX, YYFINAL, yychar, yys);
-            }
-#endif
-        }
-        if (yychar == 0) goto yyaccept;
-        goto yyloop;
-    }
-    if ((yyn = yygindex[yym]) && (yyn += yystate) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yystate)
-        yystate = yytable[yyn];
-    else
-        yystate = yydgoto[yym];
-#if YYDEBUG
-    if (yydebug)
-        printf("%sdebug: after reduction, shifting from state %d \
-to state %d\n", YYPREFIX, *yyssp, yystate);
-#endif
-    if (yyssp >= yyss + yystacksize - 1)
-    {
-        goto yyoverflow;
-    }
-    *++yyssp = yystate;
-    *++yyvsp = yyval;
-    goto yyloop;
-yyoverflow:
-    yyerror("yacc stack overflow");
-yyabort:
-    return (1);
-yyaccept:
-    return (0);
-}
diff --git a/mdk-stage1/pcmcia_/yacc_config.h b/mdk-stage1/pcmcia_/yacc_config.h
deleted file mode 100644
index f9b881def..000000000
--- a/mdk-stage1/pcmcia_/yacc_config.h
+++ /dev/null
@@ -1,37 +0,0 @@
-#define DEVICE 257
-#define CARD 258
-#define ANONYMOUS 259
-#define TUPLE 260
-#define MANFID 261
-#define VERSION 262
-#define FUNCTION 263
-#define PCI 264
-#define BIND 265
-#define CIS 266
-#define TO 267
-#define NEEDS_MTD 268
-#define MODULE 269
-#define OPTS 270
-#define CLASS 271
-#define REGION 272
-#define JEDEC 273
-#define DTYPE 274
-#define DEFAULT 275
-#define MTD 276
-#define INCLUDE 277
-#define EXCLUDE 278
-#define RESERVE 279
-#define IRQ_NO 280
-#define PORT 281
-#define MEMORY 282
-#define STRING 283
-#define NUMBER 284
-typedef union {
-    char *str;
-    unsigned long num;
-    struct device_info_t *device;
-    struct card_info_t *card;
-    struct mtd_ident_t *mtd;
-    struct adjust_list_t *adjust;
-} YYSTYPE;
-extern YYSTYPE yylval;
diff --git a/mdk-stage1/ppp/.cvsignore b/mdk-stage1/ppp/.cvsignore
deleted file mode 100644
index c258b925d..000000000
--- a/mdk-stage1/ppp/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pppd-bin
diff --git a/mdk-stage1/ppp/Changes-2.3 b/mdk-stage1/ppp/Changes-2.3
deleted file mode 100644
index f5c954b4b..000000000
--- a/mdk-stage1/ppp/Changes-2.3
+++ /dev/null
@@ -1,441 +0,0 @@
-What was new in ppp-2.3.11.
-***************************
-
-* Support for Solaris 8 has been added, including support for
-  replumbing and IPV6.
-
-* The Solaris `snoop' utility should now work on ppp interfaces.
-
-* New hooks have been added - pap_logout_hook, ip_up_hook, and
-  ip_down_hook.
-
-* A new `passprompt' plugin is included, thanks to Alan Curry, which
-  makes it possible for pppd to call an external program to get the
-  PAP password to send to the peer.
-
-* The error messages for the situation where authentication is
-  required because the system has a default route have been improved.
-
-* There is a new connect_delay option which specifies how long pppd
-  should pause after the connect script finishes.  Previously this
-  delay was fixed at 1 second.  (This delay terminates as soon as pppd
-  sees a valid PPP frame from the peer.)
-
-* The `hide-password' option is now the default, and there is a new
-  `show-password' option to enable the printing of password strings in
-  the debug output.
-
-* A fairly complete list of the names of PPP protocols has been added
-  so that when pppd rejects a frame because its protocol is not
-  supported, it can print the name of the unsupported protocol.
-
-* Synchronous serial lines are supported under Linux 2.3.x.
-
-* The bug where pppd would not recognize a modem hangup under Linux
-  2.3.x kernels has been fixed.
-
-
-What was new in ppp-2.3.10.
-***************************
-
-* Pppd now supports `plugins', which are pieces of code (packaged as
-  shared libraries) which can be loaded into pppd at runtime and which
-  can affect its behaviour.  The intention is that plugins provide a
-  way for people to customize the behaviour of pppd for their own
-  needs without needing to change the base pppd source.  I have added
-  some hooks into pppd (places where pppd will call a function
-  pointer, if non-zero, to replace some of pppd's code) and I will be
-  receptive to suggestions about places to add more hooks.  Plugins
-  are supported under Linux and Solaris at present.
-
-* We have a new maintainer for the Solaris port, Adi Masputra of Sun
-  Microsystems, and he has updated the Solaris port so that it should
-  work on 64-bit machines under Solaris 7 and later.
-
-* Pppd now has an `allow-ip' option, which takes an argument which is
-  an IP address (or subnet) which peers are permitted to use without
-  authenticating themselves.  The argument takes the same form as each
-  element of the allowed IP address list in the secrets files.  The
-  allow-ip option is privileged and may be specified multiple times.
-  Using the allow-ip option should be cleaner than putting a line like
-  `"" * "" address' in /etc/ppp/pap-secrets.
-
-* Chat can now substitute environment variables into the script.  This
-  is enabled by the -E flag.  (Thanks to Andreas Arens for the patch.)
-
-* If the PAP username and password from the peer contains unprintable
-  characters, they will be translated to a printable form before
-  looking in the pap-secrets file.  Characters >= 0x80 are translated
-  to a M- form, and characters from 0 to 0x1f (and 0x7f as well) are
-  translated to a ^X form.  If this change causes you grief, let me
-  know what would be a better translation.  It appears that some peers
-  send nulls or other control characters in their usernames and
-  passwords.
-
-* Pppd has new `ktune' and `noktune' options, which enable/disable
-  it to change kernel settings as appropriate.  This is only
-  implemented under Linux, and requires the /proc filesystem to be
-  mounted.  Under Linux, with the ktune option, pppd will enable IP
-  forwarding in the kernel if the proxyarp option is used, and will
-  enable the dynamic IP address kernel option in demand mode if the
-  local IP address changes.
-
-* Pppd no longer requires a remote address to be specified for demand
-  dialling.  If none is specified, it will use a default value of
-  10.112.112.112+unit_number.  (It will not propose this default to
-  the peer.)
-
-* The default holdoff is now 0 if no connect script is given.
-
-* The IPV6 code from Tommi Komulainen, which I unfortunately only
-  partially merged in to ppp-2.3.9, has been fixed and updated.
-
-* The linux compilation glitches should be fixed now.
-
-
-What was new in ppp-2.3.9.
-**************************
-
-* Support for the new generic PPP layer under development for the
-  Linux kernel.
-
-* You can now place extra options to apply to specific users at the
-  end of the line with their password in the pap-secrets or
-  chap-secrets file, separated from the IP address(es) with a "--"
-  separator.  These options are parsed after the peer is authenticated
-  but before network protocol (IPCP, IPXCP) or CCP negotiation
-  commences.
-
-* Pppd will apply the holdoff period if the link was terminated by the
-  peer.  It doesn't apply it if the link was terminated because the
-  local pppd thought it was idle.
-
-* Synchronous support for Solaris has been added, thanks to John
-  Morrison, and for FreeBSD, thanks to Paul Fulghum.
-
-* IPV6 support has been merged in, from Tommi Komulainen.  At the
-  moment it only supports Linux and it is not tested by me.
-
-* The `nodefaultip' option can be used in demand mode to say that pppd
-  should not suggest its local IP address to the peer.
-
-* The `init' option has been added; this causes pppd to run a script
-  to initialize the serial device (e.g. by sending an init string to
-  the modem).  Unlike the connect option, this can be used in a
-  dial-in situation.  (Thanks to Tobias Ringstrom.)
-
-* There is a new `logfile' option to send log messages to a file as
-  well as syslog.
-
-* There is a new, privileged `linkname' option which sets a logical
-  name for the link.  Pppd will create a /var/run/ppp-<linkname>.pid
-  file containing its process ID.
-
-* There is a new `maxfail' option which specifies how many consecutive
-  failed connection attempts are permitted before pppd will exit.  The
-  default value is 10, and 0 means infinity. :-)
-
-* Sundry bugs fixed.
-
-
-What was new in ppp-2.3.8.
-**************************
-
-* The exit status of pppd will now indicate whether the link was
-  successfully established, or if not, what error was encountered.
-
-* Pppd has two new options: fdlog <n> will send log messages to file
-  descriptor <n> instead of standard output, and nofdlog will stop log
-  messages from being sent to any file descriptor (they will still be
-  sent to syslog).  Pppd now will not send log messages to a file
-  descriptor if the serial port is open on that file descriptor.
-
-* Pppd sets an environment variable called PPPLOGNAME for scripts that
-  it runs, indicating the login name of the user who invoked pppd.
-
-* Pppd sets environment variables CONNECT_TIME, BYTES_SENT and
-  BYTES_RCVD for the ip-down and auth-down scripts indicating the
-  statistics for the connection just terminated.  (CONNECT_TIME is in
-  seconds.)
-
-* If the user has the serial device open on standard input and
-  specifies a symbolic link to the serial device on the command line,
-  pppd will detect this and behave correctly (i.e. not detach from its
-  controlling terminal).  Furthermore, if the serial port is open for
-  reading and writing on standard input, pppd will assume that it is
-  locked by its invoker and not lock it itself.
-
-* Chat now has a feature where if a string to be sent begins with an
-  at sign (@), the rest of the string is taken as the name of a file
-  (regular file or named pipe), and the actual string to send is taken
-  from that file.
-
-* Support for FreeBSD-2.2.8 and 3.0 has been added, thanks to Paul
-  Fulghum.
-
-* The Tru64 (aka Digital Unix aka OSF/1) port has been updated.
-
-* The system panics on Solaris SMP systems related to PPP connections
-  being established and terminated should no longer occur.
-
-* Fixed quite a few bugs.
-
-
-What was new in ppp-2.3.7.
-**************************
-
-* Pppd can now automatically allocate itself a pseudo-tty to use as
-  the serial device.  This has made three new options possible:
-
-  - `pty script' will run `script' with its standard input and output
-    connected to the master side of the pty.  For example:
-	pppd pty 'ssh -t server.my.net pppd'
-    is a basic command for setting up a PPP link (tunnel) over ssh.
-    (In practice you may need to specify other options such as IP
-    addresses, etc.)
-
-  - `notty' tells pppd to communicate over its standard input and
-    output, which do not have to be a terminal device.
-
-  - `record filename' tells pppd to record all of the characters sent
-    and received over the serial device to a file called `filename'.
-    The data is recorded in a tagged format with timestamps, which can
-    be printed in a readable form with the pppdump program, which is
-    included in this distribution.
-
-* Pppd now logs the connect time and number of bytes sent and received
-  (at the level of the serial device) when the connection is
-  terminated.
-
-* If you use the updetach or nodetach option, pppd will print its
-  messages to standard output as well as logging them with syslog
-  (provided of course pppd isn't using its standard input or output as
-  its serial device).
-
-* There is a new `privgroup groupname' option (a privileged option).
-  If the user running pppd is in group `groupname', s/he can use
-  privileged options without restriction.
-
-* There is a new `receive-all' option, which causes pppd to accept all
-  control characters, even the ones that the peer should be escaping
-  (i.e. the receive asyncmap is 0).  This is useful with some buggy
-  peers.
-
-* The default asyncmap is now 0.
-
-* There is a new `sync' option, currently only implemented under
-  Linux, which allows pppd to run on synchronous HDLC devices.
-
-* If a value for the device name or for the connect, disconnect,
-  welcome or pty option is given in a privileged option file
-  (i.e. /etc/ppp/options or a file loaded with the `call' option), it
-  cannot be overridden by a non-privileged user.
-
-* Many bugs have been fixed, notably:
-  - signals are not blocked unnecessarily, as they were in 2.3.6.
-  - the usepeerdns option should work now.
-  - the SPEED environment variable for scripts is set correctly.
-  - the /etc/ppp/auth-down script is not run until auth-up completes.
-  - the device is opened as root if it is the device on standard
-    input.
-  - pppd doesn't die with the ioctl(PPPIOCSASYNCMAP) error under linux
-    if a hangup occurs at the wrong time.
-
-* Some error messages have been changed to be clearer (I hope :-)
-
-
-What was new in ppp-2.3.6.
-**************************
-
-* Pppd now opens the tty device as the user (rather than as root) if
-  the device name was given by the user, i.e. on the command line or
-  in the ~/.ppprc file.  If the device name was given in
-  /etc/ppp/options or in a file loaded with the `call' option, the
-  device is opened as root.
-
-* The default behaviour of pppd is now to let a peer which has not
-  authenticated itself (e.g. your ISP) use any IP address to which the
-  system does not already have a route.  (This is currently only
-  supported under Linux, Solaris and Digital Unix; on the other
-  systems, the peer must now authenticate itself unless the noauth
-  option is used.)
-
-* Added new option `usepeerdns', thanks to Nick Walker
-  <nickwalker@email.com>.  If the peer supplies DNS addresses, these
-  will be written to /etc/ppp/resolv.conf.  The ip-up script can then
-  be used to add these addresses to /etc/resolv.conf if desired (see
-  the ip-up.local.add and ip-down.local.add files in the scripts
-  directory).
-
-* The Solaris ppp driver should now work correctly on SMP systems.
-
-* Minor corrections so that the code can compile under Solaris 7,
-  and under Linux with glibc-2.1.
-
-* The Linux kernel driver has been restructured for improved
-  performance.
-
-* Pppd now won't start the ip-down script until the ip-up script has
-  finished.
-
-
-What was new in ppp-2.3.5.
-**************************
-
-* Minor corrections to the Digital UNIX and NetBSD ports.
-
-* A workaround to avoid tickling a bug in the `se' serial port driver
-on Sun PCI Ultra machines running Solaris.
-
-* Fixed a bug in the negotiation of the Microsoft WINS server address
-option.
-
-* Fixed a bug in the Linux port where it would fail for kernel
-versions above 2.1.99.
-
-
-What was new in ppp-2.3.4.
-**************************
-
-* The NeXT port has been updated, thanks to Steve Perkins.
-
-* ppp-2.3.4 compiles and works under Solaris 2.6, using either gcc or
-cc.
-
-* With the Solaris, SVR4 and SunOS ports, you can control the choice
-of C compiler, C compiler options, and installation directories by
-editing the svr4/Makedefs or sunos4/Makedefs file.
-
-* Until now, we have been using the number 24 to identify Deflate
-compression in the CCP negotiations, which was the number in the draft
-RFC describing Deflate.  The number actually assigned to Deflate is
-26.  The code has been changed to use 26, but to allow the use of 24
-for now for backwards compatibility.  (This can be disabled with the
-`nodeflatedraft' option to pppd.)
-
-* Fixed some bugs in the linux driver and deflate compressor which
-were causing compression problems, including corrupting long
-incompressible packets sometimes.
-
-* Fixes to the PAM and shadow password support in pppd, from Al
-Longyear and others.
-
-* Pppd now sets some environment variables for scripts it invokes
-(ip-up/down, auth-ip/down), giving information about the connection.
-The variables it sets are PEERNAME, IPLOCAL, IPREMOTE, UID, DEVICE,
-SPEED, and IFNAME.
-
-* Pppd now has an `updetach' option, which will cause it to detach
-from its controlling terminal once the link has come up (i.e. once it
-is available for IP traffic).
-
-
-What was new in ppp-2.3.3.
-**************************
-
-* Fixed compilation problems under SunOS.
-
-* Fixed a bug introduced into chat in 2.3.2, and compilation problems
-introduced into the MS-CHAP implementation in 2.3.2.
-
-* The linux kernel driver has been updated for recent 2.1-series
-kernel changes, and it now will ask kerneld to load compression
-modules when required, if the kernel is configured to support kerneld.
-
-* Pppd should now compile correctly under linux on systems with glibc.
-
-
-What was new in ppp-2.3.2.
-**************************
-
-* In 2.3.1, I made a change which was intended to make pppd able to
-detect loss of CD during or immediately after the connection script
-runs.  Unfortunately, this had the side-effect that the connection
-script wouldn't work at all on some systems.  This change has been
-reversed.
-
-* Fix compilation problems in the Linux kernel driver.
-
-
-What was new in ppp-2.3.1.
-**************************
-
-* Enhancements to chat, thanks to Francis Demierre.  Chat can now
-accept comments in the chat script file, and has new SAY, HANGUP,
-CLR_ABORT and CLR_REPORT keywords.
-
-* Fixed a bug which causes 2.3.0 to crash Solaris systems.
-
-* Bug-fixes and restructuring of the Linux kernel driver.
-
-* The holdoff behaviour of pppd has been changed slightly: now, if
-the link comes up for IP (or other network protocol) traffic, we
-consider that the link has been successfully established, and don't
-enforce the holdoff period after the link goes down.
-
-* Pppd should now correctly wait for CD (carrier detect) from the
-modem, even when the serial port initially had CLOCAL set, and it
-should also detect loss of CD during or immediately after the
-connection script runs.
-
-* Under linux, pppd will work with older 2.2.0* version kernel
-drivers, although demand-dialling is not supported with them.
-
-* Minor bugfixes for pppd.
-
-
-What was new in ppp-2.3.
-************************
-
-* Demand-dialling.  Pppd now has a mode where it will establish the
-network interface immediately when it starts, but not actually bring
-the link up until it sees some data to be sent.  Look for the demand
-option description in the pppd man page.  Demand-dialling is not
-supported under Ultrix or NeXTStep.
-
-* Idle timeout.  Pppd will optionally terminate the link if no data
-packets are sent or received within a certain time interval.
-
-* Pppd now runs the /etc/ppp/auth-up script, if it exists, when the
-peer successfully authenticates itself, and /etc/ppp/auth-down when
-the connection is subsequently terminated.  This can be useful for
-accounting purposes.
-
-* A new packet compression scheme, Deflate, has been implemented.
-This uses the same compression method as `gzip'.  This method is free
-of patent or copyright restrictions, and it achieves better
-compression than BSD-Compress.  It does consume more CPU cycles for
-compression than BSD-Compress, but this shouldn't be a problem for
-links running at 100kbit/s or less.
-
-* There is no code in this distribution which is covered by Brad
-Clements' restrictive copyright notice.  The STREAMS modules for SunOS
-and OSF/1 have been rewritten, based on the Solaris 2 modules, which
-were written from scratch without any Clements code.
-
-* Pppstats has been reworked to clean up the output format somewhat.
-It also has a new -d option which displays data rate in kbyte/s for
-those columns which would normally display bytes.
-
-* Pppd options beginning with - or + have been renamed, e.g. -ip
-became noip, +chap became require-chap, etc.  The old options are
-still accepted for compatibility but may be removed in future.
-
-* Pppd now has some options (such as the new `noauth' option) which
-can only be specified if it is being run by root, or in an
-"privileged" options file: /etc/ppp/options or an options file in the
-/etc/ppp/peers directory.  There is a new "call" option to read
-options from a file in /etc/ppp/peers, making it possible for non-root
-users to make unauthenticated connections, but only to certain trusted
-peers.  My intention is to make the `auth' option the default in a
-future release.
-
-* Several minor new features have been added to pppd, including the
-maxconnect and welcome options.  Pppd will now terminate the
-connection when there are no network control protocols running.  The
-allowed IP address(es) field in the secrets files can now specify
-subnets (with a notation like 123.45.67.89/24) and addresses which are
-not acceptable (put a ! on the front).
-
-* Numerous bugs have been fixed (no doubt some have been introduced :-)
-Thanks to those who reported bugs in ppp-2.2.
diff --git a/mdk-stage1/ppp/FAQ b/mdk-stage1/ppp/FAQ
deleted file mode 100644
index 96bc5c708..000000000
--- a/mdk-stage1/ppp/FAQ
+++ /dev/null
@@ -1,634 +0,0 @@
-This is a list of Frequently Asked Questions about using ppp-2.x and
-their answers.
-
-
-------------------------------------------------------------------------
-
-Q: Can you give me an example of how I might set up my machine to dial
-out to an ISP?
-
-A: Here's an example for dialling out to an ISP via a modem on
-/dev/tty02.  The modem uses hardware (CTS/RTS) flow control, and the
-serial port is run at 38400 baud.  The ISP assigns our IP address.
-
-To configure pppd for this connection, create a file under
-/etc/ppp/peers called (say) my-isp containing the following:
-
-tty02 crtscts 38400
-connect 'chat -v -f /etc/ppp/chat/my-isp'
-defaultroute
-
-The ppp connection is then initiated using the following command:
-
-pppd call my-isp
-
-Of course, if the directory containing pppd is not in your path, you
-will need to give the full pathname for pppd, for example,
-/usr/sbin/pppd.
-
-When you run this, pppd will use the chat program to dial the ISP and
-invoke its ppp service.  Chat will read the file specified with -f,
-namely /etc/ppp/chat/my-isp, to find a list of strings to expect to
-receive, and strings to send.  This file would contain something like
-this:
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "Username/Password Incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"annex" "\q^Uppp"
-"Switching to PPP-ppp-Switching to PPP"
-
-You will need to change the details here.  The first string on each
-line is a string to expect to receive; the second is the string to
-send.  You can add or delete lines according to the dialog required to
-access your ISP's system.  This example is for a modem with a standard
-AT command set, dialling out to an Annex terminal server.  The \q
-toggles "quiet" mode; when quiet mode is on, the strings to be sent
-are replaced by ?????? in the log.  You may need to go through the
-dialog manually using kermit or tip first to determine what should go
-in the script.
-
-To terminate the link, run the following script, called (say)
-kill-ppp:
-
-#!/bin/sh
-unit=ppp${1-0}
-piddir=/var/run
-if [ -f $piddir/$unit.pid ]; then
-  kill -1 `cat $piddir/$unit.pid`
-fi
-
-On some systems (SunOS, Solaris, Ultrix), you will need to change
-/var/run to /etc/ppp.
-
-
-------------------------------------------------------------------------
-
-Q: Can you give me an example of how I could set up my office machine
-so I can dial in to it from home?
-
-A: Let's assume that the office machine is called "office" and is on a
-local ethernet subnet.  Call the home machine "home" and give it an IP
-address on the same subnet as "office".  We'll require both machines
-to authenticate themselves to each other.
-
-Set up the files on "office" as follows:
-
-/etc/ppp/options contains:
-
-auth		# require the peer to authenticate itself
-lock
-# other options can go here if desired
-
-/etc/ppp/chap-secrets contains:
-
-home	office	"beware the frub-jub"	home
-office	home	"bird, my son!%&*"	-
-
-Set up a modem on a serial port so that users can dial in to the
-modem and get a login prompt.
-
-On "home", set up the files as follows:
-
-/etc/ppp/options contains the same as on "office".
-
-/etc/ppp/chap-secrets contains:
-
-home	office	"beware the frub-jub"	-
-office	home	"bird, my son!%&*"	office
-
-Create a file called /etc/ppp/peers/office containing the following:
-
-tty02 crtscts 38400
-connect 'chat -v -f /etc/ppp/chat/office'
-defaultroute
-
-(You may need to change some of the details here.)
-
-Create the /etc/ppp/chat/office file containing the following:
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "ogin incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"$" "\q^U/usr/sbin/pppd proxyarp"
-"~"
-
-You will need to change the details.  Note that the "$" in the
-second-last line is expecting the shell prompt after a successful
-login - you may need to change it to "%" or something else.
-
-You then initiate the connection (from home) with the command:
-
-pppd call office
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, the modem successfully dials
-the remote system, but then hangs up a few seconds later.  How do I
-find out what's going wrong?
-
-A: There are a number of possible problems here.  The first thing to
-do is to ensure that pppd's messages are visible.  Pppd uses the
-syslog facility to log messages which help to identify specific
-problems.  Messages from pppd have facility "daemon" and levels
-ranging from "debug" to "error".
-
-Usually it is useful to see messages of level "notice" or higher on
-the console.  To see these, find the line in /etc/syslog.conf which
-has /dev/console on the right-hand side, and add "daemon.notice" in
-the list on the left.  The line will end up looking something like
-this:
-
-*.err;kern.debug;auth.notice;mail.crit;daemon.notice	/dev/console
-
-Note that the whitespace is tabs, *not* spaces.
-
-If you are having problems, it may be useful to see messages of level
-"info" as well, in which case you would change "daemon.notice" to
-"daemon.info".
-
-In addition, it is useful to collect pppd's debugging output in a
-file - the debug option to pppd causes it to log the contents of all
-control packets sent and received in human-readable form.  To do this,
-add a line like this to /etc/syslog.conf:
-
-daemon,local2.debug		/etc/ppp/log
-
-and create an empty /etc/ppp/log file.
-
-When you change syslog.conf, you will need to send a HUP signal to
-syslogd to causes it to re-read syslog.conf.  You can do this with a
-command like this (as root):
-
-	kill -HUP `cat /etc/syslogd.pid`
-
-(On some systems, you need to use /var/run/syslog.pid instead of
-/etc/syslogd.pid.)
-
-After setting up syslog like this, you can use the -v flag to chat and
-the `debug' option to pppd to get more information.  Try initiating
-the connection again; when it fails, inspect /etc/ppp/log to see what
-happened and where the connection failed.
-
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, I get an error message saying
-"Serial link is not 8-bit clean".  Why?
-
-A: The most common cause is that your connection script hasn't
-successfully dialled out to the remote system and invoked ppp service
-there.  Instead, pppd is talking to something (a shell or login
-process on the remote machine, or maybe just the modem) which is only
-outputting 7-bit characters.
-
-This can also arise with a modem which uses an AT command set if the
-dial command is issued before pppd is invoked, rather than within a
-connect script started by pppd.  If the serial port is set to 7
-bits/character plus parity when the last AT command is issued, the
-modem serial port will be set to the same setting.
-
-Note that pppd *always* sets the local serial port to 8 bits per
-character, with no parity and 1 stop bit.  So you shouldn't need to
-issue an stty command before invoking pppd.
-
-
-------------------------------------------------------------------------
-
-Q: When I try to establish a connection, I get an error message saying
-"Serial line is looped back".  Why?
-
-A: Probably your connection script hasn't successfully dialled out to
-the remote system and invoked ppp service there.  Instead, pppd is
-talking to something which is just echoing back the characters it
-receives.  The -v option to chat can help you find out what's going
-on.  It can be useful to include "~" as the last expect string to
-chat, so chat won't return until it's seen the start of the first PPP
-frame from the remote system.
-
-Another possibility is that your phone connection has dropped for some
-obscure reason and the modem is echoing the characters it receives
-from your system.
-
-
-------------------------------------------------------------------------
-
-Q: I installed pppd successfully, but when I try to run it, I get a
-message saying something like "peer authentication required but no
-authentication files accessible".
-
-A: When pppd is used on a machine which already has a connection to
-the Internet (or to be more precise, one which has a default route in
-its routing table), it will require all peers to authenticate
-themselves.  The reason for this is that if you don't require
-authentication, you have a security hole, because the peer can
-basically choose any IP address it wants, even the IP address of some
-trusted host (for example, a host mentioned in some .rhosts file).
-
-On machines which don't have a default route, pppd does not require
-the peer to authenticate itself.  The reason is that such machines
-would mostly be using pppd to dial out to an ISP which will refuse to
-authenticate itself.  In that case the peer can use any IP address as
-long as the system does not already have a route to that address.
-For example, if you have a local ethernet network, the peer can't use
-an address on that network.  (In fact it could if it authenticated
-itself and it was permitted to use that address by the pap-secrets or
-chap-secrets file.)
-
-There are 3 ways around the problem:
-
-1. If possible, arrange for the peer to authenticate itself, and
-create the necessary secrets files (/etc/ppp/pap-secrets and/or
-/etc/ppp/chap-secrets).
-
-2. If the peer refuses to authenticate itself, and will always be
-using the same IP address, or one of a small set of IP addresses, you
-can create an entry in the /etc/ppp/pap-secrets file like this:
-
-  ""	  *	  ""	  his-ip.his-domain his-other-ip.other-domain
-
-(that is, using the empty string for the client name and password
-fields).  Of couse, you replace the 4th and following fields in the
-example above with the IP address(es) that the peer may use.  You can
-use either hostnames or numeric IP addresses.
-
-3. You can add the `noauth' option to the /etc/ppp/options file.
-Pppd will then not ask the peer to authenticate itself.  If you do
-this, I *strongly* recommend that you remove the set-uid bit from the
-permissions on the pppd executable, with a command like this:
-
-	chmod u-s /usr/sbin/pppd
-
-Then, an intruder could only use pppd maliciously if they had already
-become root, in which case they couldn't do any more damage using pppd
-than they could anyway.
-
-
-------------------------------------------------------------------------
-
-Q: What do I need to put in the secrets files?
-
-A: Three things:
-   - secrets (i.e. passwords) to use for authenticating this host to
-     other hosts (i.e., for proving our identity to others);
-   - secrets which other hosts can use for authenticating themselves
-     to us (i.e., so that they can prove their identity to us); and
-   - information about which IP addresses other hosts may use, once
-     they have authenticated themselves.
-
-There are two authentication files: /etc/ppp/pap-secrets, which
-contains secrets for use with PAP (the Password Authentication
-Protocol), and /etc/ppp/chap-secrets, which contains secrets for use
-with CHAP (the Challenge Handshake Authentication Protocol).  Both
-files have the same simple format, which is as follows:
-
-- The file contains a series of entries, each of which contains a
-secret for authenticating one machine to another.
-
-- Each entry is contained on a single logical line.  A logical line
-may be continued across several lines by placing a backslash (\) at
-the end of each line except the last.
-
-- Each entry has 3 or more fields, separated by whitespace (spaces
-and/or tabs).  These fields are, in order:
-	* The name of the machine that is authenticating itself
-	  (the "client").
-	* The name of the machine that is authenticating the client
-	  (the "server").
-	* The secret to be used for authenticating that client to that
-	  server.  If this field begins with the at-sign `@', the rest
-	  of the field is taken as the name of a file containing the
-	  actual secret.
-	* The 4th and any following fields list the IP address(es)
-	  that the client may use.
-
-- The file may contain comments, which begin with a `#' and continue
-to the end of the line.
-
-- Double quotes `"' should be used around a field if it contains
-characters with special significance, such as space, tab, `#', etc.
-
-- The backslash `\' may be used before characters with special
-significance (space, tab, `#', `\', etc.) to remove that significance.
-
-Some important points to note:
-
-* A machine can be *both* a "client" and a "server" for the purposes
-of authentication - this happens when both peers require the other to
-authenticate itself.  So A would authenticate itself to B, and B would
-also authenticate itself to A (possibly using a different
-authentication protocol).
-
-* If both the "client" and the "server" are running ppp-2.x, they need
-to have a similar entry in the appropriate secrets file; the first two
-fields are *not* swapped on the client, compared to the server.  So
-the client might have an entry like this:
-
-	ay	bee	"our little secret"	-
-
-and the corresponding entry on the server could look like this:
-
-	ay	bee	"our little secret"	123.45.67.89
-
-
-------------------------------------------------------------------------
-
-Q: Explain about PAP and CHAP?
-
-PAP stands for the Password Authentication Protocol.  With this
-protocol, the "client" (the machine that needs to authenticate itself)
-sends its name and a password, in clear text, to the "server".  The
-server returns a message indicating whether the name and password are
-valid.
-
-CHAP stands for the Challenge Handshake Authentication Protocol.  It
-is designed to address some of the deficiencies and vulnerabilities of
-PAP.  Like PAP, it is based on the client and server having a shared
-secret, but the secret is never passed in clear text over the link.
-Instead, the server sends a "challenge" - an arbitrary string of
-bytes, and the client must prove it knows the shared secret by
-generating a hash value from the challenge combined with the shared
-secret, and sending the hash value back to the server.  The server
-also generates the hash value and compares it with the value received
-from the client.
-
-At a practical level, CHAP can be slightly easier to configure than
-PAP because the server sends its name with the challenge.  Thus, when
-finding the appropriate secret in the secrets file, the client knows
-the server's name.  In contrast, with PAP, the client has to find its
-password (i.e. the shared secret) before it has received anything from
-the server.  Thus, it may be necessary to use the `remotename' option
-to pppd when using PAP authentication so that it can select the
-appropriate secret from /etc/ppp/pap-secrets.
-
-Microsoft also has a variant of CHAP which uses a different hashing
-arrangement from normal CHAP.  There is a client-side implementation
-of Microsoft's CHAP in ppp-2.3; see README.MSCHAP80.
-
-
-------------------------------------------------------------------------
-
-Q: When the modem hangs up, without the remote system having
-terminated the connection properly, pppd does not notice the hangup,
-but just keeps running.  How do I get pppd to notice the hangup and
-exit?
-
-A: Pppd detects modem hangup by looking for an end-of-file indication
-from the serial driver, which should be generated when the CD (carrier
-detect) signal on the serial port is deasserted.  For this to work:
-
-- The modem has to be set to assert CD when the connection is made and
-deassert it when the phone line hangs up.  Usually the AT&C1 modem
-command sets this mode.
-
-- The cable from the modem to the serial port must connect the CD
-signal (on pin 8).
-
-- Some serial drivers have a "software carrier detect" mode, which
-must be *disabled*.  The method of doing this varies between systems.
-Under SunOS, use the ttysoftcar command.  Under NetBSD, edit /etc/ttys
-to remove the "softcar" flag from the line for the serial port, and
-run ttyflags.
-
-
-------------------------------------------------------------------------
-
-Q: Why should I use PPP compression (BSD-Compress or Deflate) when my
-modem already does V.42 compression?  Won't it slow the CPU down a
-lot?
-
-A: Using PPP compression is preferable, especially when using modems
-over phone lines, for the following reasons:
-
-- The V.42 compression in the modem isn't very strong - it's an LZW
-technique (same as BSD-Compress) with a 10, 11 or 12 bit code size.
-With BSD-Compress you can use a code size of up to 15 bits and get
-much better compression, or you can use Deflate and get even better
-compression ratios.
-
-- I have found that enabling V.42 compression in my 14.4k modem
-increases the round-trip time for a character to be sent, echoed and
-returned by around 40ms, from 160ms to 200ms (with error correction
-enabled).  This is enough to make it feel less responsive on rlogin or
-telnet sessions.  Using PPP compression adds less than 5ms (small
-enough that I couldn't measure it reliably).  I admit my modem is a
-cheapie and other modems may well perform better.
-
-- While compression and decompression do require some CPU time, they
-reduce the amount of time spent in the serial driver to transmit a
-given amount of data.  Many machines require an interrupt for each
-character sent or received, and the interrupt handler can take a
-significant amount of CPU time.  So the increase in CPU load isn't as
-great as you might think.  My measurements indicate that a system with
-a 33MHz 486 CPU should be able to do Deflate compression for serial
-link speeds of up to 100kb/s or more.  It depends somewhat on the type
-of data, of course; for example, when compressing a string of nulls
-with Deflate, it's hard to get a high output data rate from the
-compressor, simply because it compresses strings of nulls so well that
-it has to eat a very large amount of input data to get each byte of
-output.
-
-
-------------------------------------------------------------------------
-
-Q: I get messages saying "Unsupported protocol (...) received".  What do
-these mean?
-
-A: If you only get one or two when pppd starts negotiating with the
-peer, they mean that the peer wanted to negotiate some PPP protocol
-that pppd doesn't understand.  This doesn't represent a problem, it
-simply means that there is some functionality that the peer supports
-that pppd doesn't, so that functionality can't be used.
-
-If you get them sporadically while the link is operating, or if the
-protocol numbers (in parentheses) don't correspond to any valid PPP
-protocol that the peer might be using, then the problem is probably
-that characters are getting corrupted on the receive side, or that
-extra characters are being inserted into the receive stream somehow.
-If this is happening, most packets that get corrupted should get
-discarded by the FCS (Frame Check Sequence, a 16-bit CRC) check, but a
-small number may get through.
-
-One possibility may be that you are receiving broadcast messages on
-the remote system which are being sent over your serial link.  Another
-possibility is that your modem is set for XON/XOFF (software) flow
-control and is inserting ^Q and ^S characters into the receive data
-stream.
-
-
-------------------------------------------------------------------------
-
-Q: I get messages saying "Protocol-Reject for unsupported protocol ...".
-What do these mean?
-
-A: This is the other side of the previous question.  If characters are
-getting corrupted on the way to the peer, or if your system is
-inserting extra bogus characters into the transmit data stream, the
-peer may send protocol-reject messages to you, resulting in the above
-message (since your pppd doesn't recognize the protocol number
-either.)
-
-
-------------------------------------------------------------------------
-
-Q: I get a message saying something like "ioctl(TIOCSETD): Operation
-not permitted".  How do I fix this?
-
-A: This is because pppd is not running as root.  If you have not
-installed pppd setuid-root, you will have to be root to run it.  If
-you have installed pppd setuid-root and you still get this message, it
-is probably because your shell is using some other copy of pppd than
-the installed one - for example, if you are in the pppd directory
-where you've just built pppd and your $PATH has . before /usr/sbin (or
-wherever pppd gets installed).
-
-
-------------------------------------------------------------------------
-
-Q: Has your package been ported to HP/UX or IRIX or AIX?
-
-A: No.  I don't have access to systems running HP/UX or AIX.  No-one
-has volunteered to port it to HP/UX.  I had someone who did a port for
-AIX 4.x, but who is no longer able to maintain it.  And apparently AIX
-3.x is quite different, so it would need a separate port.
-
-IRIX includes a good PPP implementation in the standard distribution,
-as far as I know.
-
-
-------------------------------------------------------------------------
-
-Q: Under SunOS 4, when I try to modload the ppp modules, I get the
-message "can't open /dev/vd: No such device".
-
-A: First check in /dev that there is an entry like this:
-
-crw-r--r--  1  root         57,   0 Oct 2  1991 vd
-
-If not, make one (mknod /dev/vd c 57 0).  If the problem still exists,
-probably your kernel has been configured without the vd driver
-included.  The vd driver is needed for loadable module support.
-
-First, identify the config file that was used.  When you boot your
-machine, or if you run /etc/dmesg, you'll see a line that looks
-something like this:
-
-SunOS Release 4.1.3_U1 (CAP_XBOX) #7: Thu Mar 21 15:31:56 EST 1996
-			^^^^^^^^
-			this is the config file name
-
-The config file will be in the /sys/`arch -k`/conf directory (arch -k
-should return sun4m for a SparcStation 10, sun3x for a Sun 3/80,
-etc.).  Look in there for a line saying "options VDDRV".  If that line
-isn't present (or is commented out), add it (or uncomment it).
-
-You then need to rebuild the kernel as described in the SunOS
-manuals.  Basically you need to run config and make like this:
-
-	/usr/etc/config CAP_XBOX
-	cd ../CAP_XBOX
-	make
-
-(replacing the string CAP_XBOX by the name of the config file for your
-kernel, of course).
-
-Then copy the new kernel to /:
-
-	mv /vmunix /vmunix.working
-	cp vmunix /
-
-and reboot.  Modload should then work.
-
-
-------------------------------------------------------------------------
-
-Q: I'm running Linux (or NetBSD or FreeBSD), and my system comes with
-PPP already.  Should I consider installing this package?  Why?
-
-A: The PPP that is already installed in your system is (or is derived
-from) some version of this PPP package.  You can find out what version
-of this package is already installed with the command "pppd --help".
-If this is older than the latest version, you may wish to install the
-latest version so that you can take advantage of the new features or
-bug fixes.
-
-
-------------------------------------------------------------------------
-
-Q: I'm running pppd in demand mode, and I find that pppd often dials
-out unnecessarily when I try to make a connection within my local
-machine or with a machine on my local LAN.  What can I do about this?
-
-A: Very often the cause of this is that a program is trying to contact
-a nameserver to resolve a hostname, and the nameserver (specified in
-/etc/resolv.conf, usually) is on the far side of the ppp link.  You
-can try executing a command such as `ping myhost' (where myhost is the
-name of the local machine, or some other machine on a local LAN), to
-see whether that starts the ppp link.  If it does, check the setup of
-your /etc/hosts file to make sure you have the local machine and any
-hosts on your local LAN listed, and /etc/resolv.conf and/or
-/etc/nsswitch.conf files to make sure you resolve hostnames from
-/etc/hosts if possible before trying to contact a nameserver.
-
-
-------------------------------------------------------------------------
-
-Q: Since I installed ppp-2.3.6, dialin users to my server have been
-getting this message when they run pppd:
-
-peer authentication required but no suitable secret(s) found for 
-authenticating any peer to us (ispserver)
-
-A: In 2.3.6, the default is to let an unauthenticated peer only use IP
-addresses to which the machine doesn't already have a route.  So on a
-machine with a default route, everyone has to authenticate.  If you
-really don't want that, you can put `noauth' in the /etc/ppp/options
-file.  Note that there is then no check on who is using which IP
-address.  IMHO, this is undesirably insecure, but I guess it may be
-tolerable as long as you don't use any .rhosts files or anything like
-that.  I recommend that you require dialin users to authenticate, even
-if just with PAP using their login password (using the `login' option
-to pppd).  If you do use `noauth', you should at least have a pppusers
-group and set the permissions on pppd to allow only user and group to
-execute it.
-
-------------------------------------------------------------------------
-
-Q: When running pppd as a dial-in server, I often get the message
-"LCP: timeout sending Config-Requests" from pppd.  It seems to be
-random, but dial-out always works fine.  What is wrong?
-
-A: Most modern modems auto-detects the speed of the serial line
-between the modem and the computer.  This auto-detection occurs when
-the computer sends characters to the modem, when the modem is in
-command mode.  It does not occur when the modem is in data mode.
-Thus, if you send commands to the modem at 2400 bps, and then change
-the serial port speed to 115200 bps, the modem will not detect this
-change until something is transmitted from the computer to the modem.
-When running pppd in dial-in mode (i.e. without a connect script),
-pppd sets the speed of the serial port, but does not transmit
-anything.  If the modem was already running at the specified speed,
-everything is fine, but if not, you will just receive garbage from the
-modem.  To cure this, use an init script such as the following:
-
-	pppd ttyS0 115200 modem crtscts init "chat '' AT OK"
-
-To reset the modem and enable auto-answer, use:
-
-	pppd ttyS0 115200 modem crtscts init "chat '' ATZ OK ATS0=1 OK"
diff --git a/mdk-stage1/ppp/PLUGINS b/mdk-stage1/ppp/PLUGINS
deleted file mode 100644
index 0eeabe249..000000000
--- a/mdk-stage1/ppp/PLUGINS
+++ /dev/null
@@ -1,131 +0,0 @@
-Starting with version 2.3.10, pppd includes support for `plugins' -
-pieces of code which can be loaded into pppd at runtime and which can
-affect its behaviour in various ways.  The idea of plugins is to
-provide a way for people to customize the behaviour of pppd without
-having to either apply local patches to each version or get their
-patches accepted into the standard distribution.  My aim is that
-plugins will be able to be used with successive versions of pppd
-without needing to recompile the plugins.
-
-A plugin is a standard shared library object, typically with a name
-ending in .so.  They are loaded using the standard dlopen() library
-call, so plugins are only supported on systems which support shared
-libraries and the dlopen call.  At present pppd is compiled with
-plugin support only under Linux and Solaris.
-
-Plugins are loaded into pppd using the `plugin' option, which takes
-one argument, the name of a shared object file.  The plugin option is
-a privileged option.  I suggest that you give the full path name of
-the shared object file; if you don't, it may be possible for
-unscrupulous users to substitute another shared object file for the
-one you mean to load, e.g. by setting the LD_LIBRARY_PATH variable.
-
-Plugins are usually written in C and compiled and linked to a shared
-object file in the appropriate manner for your platform.  Using gcc
-under Linux, a plugin called `xyz' could be compiled and linked with
-the following commands:
-
-	gcc -c -O xyz.c
-	gcc -shared -o xyz.so xyz.o
-
-There are some example plugins in the pppd/plugins directory in the
-ppp distribution.  Currently there is one example, minconn.c, which
-implements a `minconnect' option, which specifies a minimum connect
-time before the idle timeout applies.
-
-Plugins can access global variables within pppd, so it is useful for
-them to #include "pppd.h" from the pppd source directory.
-
-Every plugin must contain a global procedure called `plugin_init'.
-This procedure will get called (with no arguments) immediately after
-the plugin is loaded.
-
-Plugins can affect the behaviour of pppd in at least three ways:
-
-1. They can add extra options which pppd will then recognize.  This is
-   done by calling the add_options() procedure with a pointer to an
-   array of option_t structures.  The last entry in the array must
-   have its name field set to NULL.
-
-2. Pppd contains `hook' variables which are procedure pointers.  If a
-   given hook is not NULL, pppd will call the procedure it points to
-   at the appropriate point in its processing.  The plugin can set any
-   of these hooks to point to its own procedures.  See below for a
-   description of the hooks which are currently implemented.
-
-3. Plugin code can call any global procedures and access any global
-   variables in pppd.
-
-Here is a list of the currently implemented hooks in pppd.
-
-
-int (*idle_time_hook)(struct ppp_idle *idlep);
-
-The idle_time_hook is called when the link first comes up (i.e. when
-the first network protocol comes up) and at intervals thereafter.  On
-the first call, the idlep parameter is NULL, and the return value is
-the number of seconds before pppd should check the link activity, or 0
-if there is to be no idle timeout.
-
-On subsequent calls, idlep points to a structure giving the number of
-seconds since the last packets were sent and received.  If the return
-value is > 0, pppd will wait that many seconds before checking again.
-If it is <= 0, that indicates that the link should be terminated due
-to lack of activity.
-
-
-int (*holdoff_hook)(void);
-
-The holdoff_hook is called when an attempt to bring up the link fails,
-or the link is terminated, and the persist or demand option was used.
-It returns the number of seconds that pppd should wait before trying
-to reestablish the link (0 means immediately).
-
-
-int (*pap_check_hook)(void);
-int (*pap_passwd_hook)(char *user, char *passwd);
-int (*pap_auth_hook)(char *user, int userlen,
-		     char *passwd, int passlen,
-		     char **msgp, int *msglenp,
-		     struct wordlist **paddrs,
-		     struct wordlist **popts);
-
-These hooks are designed to allow a plugin to replace the normal PAP
-password processing in pppd with something different (e.g. contacting
-an external server).
-
-The pap_check_hook is called to check whether there is any possibility
-that the peer could authenticate itself to us.  If it returns 1, pppd
-will ask the peer to authenticate itself.  If it returns 0, pppd will
-not ask the peer to authenticate itself (but if authentication is
-required, pppd may exit, or terminate the link before network protocol
-negotiation).  If it returns -1, pppd will look in the pap-secrets
-file as it would normally.
-
-The pap_passwd_hook is called to determine what username and password
-pppd should use in authenticating itself to the peer with PAP.  The
-user string will already be initialized, by the `user' option, the
-`name' option, or from the hostname, but can be changed if necessary.
-MAXNAMELEN bytes of space are available at *user, and MAXSECRETLEN
-bytes of space at *passwd.  If this hook returns 0, pppd will use the
-values at *user and *passwd; if it returns -1, pppd will look in the
-pap-secrets file, or use the value from the +ua or password option, as
-it would normally.
-
-The pap_auth_hook is called to determine whether the username and
-password supplied by the peer are valid.  user and passwd point to
-null-terminated strings containing the username and password supplied
-by the peer, with non-printable characters converted to a printable
-form.  The pap_auth_hook function should set msg to a string to be
-returned to the peer and return 1 if the username/password was valid
-and 0 if not.  If the hook returns -1, pppd will look in the
-pap-secrets file as usual.
-
-If the username/password was valid, the hook can set *paddrs to point
-to a wordlist containing the IP address(es) which the peer is
-permitted to use, formatted as in the pap-secrets file.  It can also
-set *popts to a wordlist containing any extra options for this user
-which pppd should apply at this point.
-
-
-## $Id$ ##
diff --git a/mdk-stage1/ppp/README b/mdk-stage1/ppp/README
deleted file mode 100644
index aa1e5f9c2..000000000
--- a/mdk-stage1/ppp/README
+++ /dev/null
@@ -1,168 +0,0 @@
-This is the README file for ppp-2.4, a package which implements the
-Point-to-Point Protocol (PPP) to provide Internet connections over
-serial lines.
-
-
-Introduction.
-*************
-
-The Point-to-Point Protocol (PPP) provides a standard way to establish
-a network connection over a serial link.  At present, this package
-supports IP and the protocols layered above IP, such as TCP and UDP.
-The Linux and Solaris ports of this package have optional support for
-IPV6; the Linux port of this package also has support for IPX.
-
-This software consists of two parts:
-
-- Kernel code, which establishes a network interface and passes
-packets between the serial port, the kernel networking code and the
-PPP daemon (pppd).  This code is implemented using STREAMS modules on
-SunOS 4.x and Solaris, and as a line discipline under Linux and FreeBSD.
-
-- The PPP daemon (pppd), which negotiates with the peer to establish
-the link and sets up the ppp network interface.  Pppd includes support
-for authentication, so you can control which other systems may make a
-PPP connection and what IP addresses they may use.
-
-The primary platforms supported by this package are Linux and Solaris.
-Code for SunOS 4.x is included here but is largely untested.  I have
-code for NeXTStep, FreeBSD, SVR4, Tru64 (Digital Unix), AIX and Ultrix
-but no active maintainers for these platforms.  Code for all of these
-except AIX is included in the ppp-2.3.11 release.
-
-
-Installation.
-*************
-
-The file SETUP contains general information about setting up your
-system for using PPP.  There is also a README file for each supported
-system, which contains more specific details for installing PPP on
-that system.  The supported systems, and the corresponding README
-files, are:
-
-	Linux				README.linux
-	Solaris 2			README.sol2
-	SunOS 4.x			README.sunos4
-
-In each case you start by running the ./configure script.  This works
-out which operating system you are using and creates symbolic links to
-the appropriate makefiles.  You then run `make' to compile the
-user-level code, and (as root) `make install' to install the
-user-level programs pppd, chat and pppstats.
-
-N.B. Since 2.3.0, leaving the permitted IP addresses column of the
-pap-secrets or chap-secrets file empty means that no addresses are
-permitted.  You need to put a "*" in that column to allow the peer to
-use any IP address.  (This only applies where the peer is
-authenticating itself to you, of course.)
-
-
-What's new in ppp-2.4.1.
-************************
-
-* Pppd can now print out the set of options that are in effect.  The
-  new `dump' option causes pppd to print out the option values after
-  option parsing is complete.  The `dryrun' option causes pppd to
-  print the options and then exit.
-
-* The option parsing code has been fixed so that options in the
-  per-tty options file are parsed correctly, and don't override values
-  from the command line in most cases.
-
-* The plugin option now looks in /usr/lib/pppd/<pppd-version> (for
-  example, /usr/lib/pppd/2.4.1b1) for shared objects for plugins if
-  there is no slash in the plugin name.
-
-* When loading a plugin, pppd will now check the version of pppd for
-  which the plugin was compiled, and refuse to load it if it is
-  different to pppd's version string.  To enable this, the plugin
-  source needs to #include "pppd.h" and have a line saying:
-	char pppd_version[] = VERSION;
-
-* There is a bug in zlib, discovered by James Carlson, which can cause
-  kernel memory corruption if Deflate is used with the lowest setting,
-  8.  As a workaround pppd will now insist on using at least 9.
-
-* Pppd should compile on Solaris and SunOS again.
-
-* Pppd should now set the MTU correctly on demand-dialled interfaces.
-
-
-What was new in ppp-2.4.0.
-**************************
-
-* Multilink: this package now allows you to combine multiple serial
-  links into one logical link or `bundle', for increased bandwidth and
-  reduced latency.  This is currently only supported under the
-  Linux-2.3.99pre5 or later kernels.
-
-* All the pppd processes running on a system now write information
-  into a common database.  I used the `tdb' code from samba for this.
-
-* New hooks have been added.
-
-For a list of the changes made during the 2.3 series releases of this
-package, see the Changes-2.3 file.
-
-
-Compression methods.
-********************
-
-This package supports two packet compression methods: Deflate and
-BSD-Compress.  Other compression methods which are in common use
-include Predictor, LZS, and MPPC.  These methods are not supported for
-two reasons - they are patent-encumbered, and they cause some packets
-to expand slightly, which pppd doesn't currently allow for.
-BSD-Compress is also patent-encumbered (its inclusion in this package
-can be considered a historical anomaly :-) but it doesn't ever expand
-packets.  Neither does Deflate, which uses the same algorithm as gzip.
-
-
-Patents.
-********
-
-The BSD-Compress algorithm used for packet compression is the same as
-that used in the Unix "compress" command.  It is apparently covered by
-U.S. patents 4,814,746 (owned by IBM) and 4,558,302 (owned by Unisys),
-and corresponding patents in various other countries (but not
-Australia).  If this is of concern, you can build the package without
-including BSD-Compress.  To do this, edit net/ppp-comp.h to change the
-definition of DO_BSD_COMPRESS to 0.  The bsd-comp.c files are then no
-longer needed, so the references to bsd-comp.o may optionally be
-removed from the Makefiles.
-
-
-Contacts.
-*********
-
-The comp.protocols.ppp newsgroup is a useful place to get help if you
-have trouble getting your ppp connections to work.  Please do not send
-me questions of the form "please help me get connected to my ISP" -
-I'm sorry, but I simply do not have the time to answer all the
-questions like this that I get.
-
-If you find bugs in this package, please report them to the maintainer
-for the port for the operating system you are using:
-
-Linux			Paul Mackerras <paulus@linuxcare.com>
-Solaris 2		James Carlson <james.d.carlson@east.sun.com>
-SunOS 4.x		Adi Masputra <adi.masputra@sun.com>
-
-
-Copyrights:
-***********
-
-All of the code can be freely used and redistributed.  The individual
-source files each have their own copyright and permission notice; some
-have a BSD-style notice and some are under the GPL.
-
-
-Distribution:
-*************
-
-The primary site for releases of this software is:
-
-	ftp://linuxcare.com.au/pub/ppp/
-
-
-($Id$)
diff --git a/mdk-stage1/ppp/README.MSCHAP80 b/mdk-stage1/ppp/README.MSCHAP80
deleted file mode 100644
index d3ed291b7..000000000
--- a/mdk-stage1/ppp/README.MSCHAP80
+++ /dev/null
@@ -1,284 +0,0 @@
-PPP Client Support for Microsoft's CHAP-80
-==========================================
-
-Eric Rosenquist          rosenqui@strataware.com
-(updated by Paul Mackerras)
-(updated by Al Longyear)
-(updated by Farrell Woods)
-
-INTRODUCTION
-
-Microsoft has introduced an extension to the Challenge/Handshake
-Authentication Protocol (CHAP) which avoids storing cleartext
-passwords on a server.  (Unfortunately, this is not as secure as it
-sounds, because the encrypted password stored on a server can be used
-by a bogus client to gain access to the server just as easily as if
-the password were stored in cleartext.)  The details of the Microsoft
-extensions can be found in the document:
-
-    <ftp://ftp.microsoft.com/developr/rfc/chapexts.txt>
-
-In short, MS-CHAP is identified as <auth chap 80> since the hex value
-of 80 is used to designate Microsoft's scheme.  Standard PPP CHAP uses
-a value of 5.  If you enable PPP debugging with the "debug" option and
-see something like the following in your logs, the remote server is
-requesting MS-CHAP:
-
-  rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth chap 80> <magic 0x46a3>]
-                                           ^^^^^^^^^^^^
-
-The standard pppd implementation will indicate its lack of support for
-MS-CHAP by NAKing it:
-
-  sent [LCP ConfNak id=0x2 <auth chap 05>]
-
-Windows NT Server systems are often configured to "Accept only
-Microsoft Authentication" (this is intended to enhance security).  Up
-until now, that meant that you couldn't use this version of PPPD to
-connect to such a system.  I've managed to get a client-only
-implementation of MS-CHAP working; it will authenticate itself to
-another system using MS-CHAP, but if you're using PPPD as a dial-in
-server, you won't be able to use MS-CHAP to authenticate the clients.
-This would not be a lot of extra work given that the framework is in
-place, but I didn't need it myself so I didn't implement it.
-
-
-BUILDING THE PPPD
-
-MS-CHAP uses a combination of MD4 hashing and DES encryption for
-authentication.  You may need to get Eric Young's libdes library in
-order to use my MS-CHAP extensions.  A lot of UNIX systems already
-have DES encryption available via the crypt(3), encrypt(3) and
-setkey(3) interfaces.  Some may (such as that on Digital UNIX)
-provide only the encryption mechanism and will not perform
-decryption.  This is okay.  We only need to encrypt to perform
-MS-CHAP authentication.
-
-If you have encrypt/setkey available, then hopefully you need only
-define these two things in your Makefile: -DUSE_CRYPT and -DCHAPMS.
-Skip the paragraphs below about obtaining and building libdes.  Do
-the "make clean" and "make" as described below.  Linux users
-should not need to modify their Makefiles.  Instead,
-just do "make CHAPMS=1 USE_CRYPT=1".
-
-If you don't have encrypt and setkey, you will need Eric Young's
-libdes library.  You can find it in:
-
-ftp://ftp.funet.fi/pub/crypt/mirrors/ftp.psy.uq.oz.au/DES/libdes-3.06.tar.gz
-
-Australian residents can get libdes from Eric Young's site:
-
-ftp://ftp.psy.uq.oz.au/pub/Crypto/DES/libdes-3.06.tar.gz
-
-It is also available on many other sites (ask Archie).
-
-I used libdes-3.06, but hopefully anything newer than that will work
-also.  Get the library, build and test it on your system, and install
-it somewhere (typically /usr/local/lib and /usr/local/include).
-
-
-
-You should now be ready to (re)compile the PPPD.  Go to the pppd
-subdirectory and make sure the Makefile contains "-DCHAPMS" in the
-CFLAGS or COMPILE_FLAGS macro, and that the LIBS macro (or LDADD for
-BSD systems) contains "-ldes".  Depending on your system and where the
-DES library was installed, you may also need to alter the include and
-library paths used by your compiler.
-
-Do a "make clean" and then a "make" to rebuild pppd.  Assuming all
-goes well, install the new pppd and move on to the CONFIGURATION
-section.
-
-
-CONFIGURATION
-
-If you've never used PPPD with CHAP before, read the man page (type
-"man pppd") and read the description in there.  Basically, you need to
-edit the "chap-secrets" file typically named /etc/ppp/chap-secrets.
-This should contain the following two lines for each system with which
-you use CHAP (with no leading blanks):
-
-    RemoteHost  Account     Secret
-    Account     RemoteHost  Secret
-
-Note that you need both lines and that item 1 and 2 are swapped in the
-second line.  I'm not sure why you need it twice, but it works and I didn't
-have time to look into it further.  The "RemoteHost" is a somewhat
-arbitrary name for the remote Windows NT system you're dialing.  It doesn't
-have to match the NT system's name, but it *does* have to match what you
-use with the "remotename" parameter.  The "Account" is the Windows NT
-account name you have been told to use when dialing, and the "Secret" is
-the password for that account.  For example, if your service provider calls
-their machine "DialupNT" and tells you your account and password are
-"customer47" and "foobar", add the following to your chap-secrets file:
-
-    DialupNT    customer47  foobar
-    customer47  DialupNT    foobar
-
-The only other thing you need to do for MS-CHAP (compared to normal CHAP)
-is to always use the "remotename" option, either on the command line or in
-your "options" file (see the pppd man page for details).  In the case of
-the above example, you would need to use the following command line:
-
-    pppd name customer47 remotename DialupNT <other options>
-
-or add:
-
-    name customer47
-    remotename DialupNT
-
-to your PPPD "options" file.
-
-The "remotename" option is required for MS-CHAP since Microsoft PPP servers
-don't send their system name in the CHAP challenge packet.
-
-
-E=691 (AUTHENTICATION_FAILURE) ERRORS WHEN YOU HAVE THE VALID SECRET (PASSWORD)
-
-If your RAS server is not the domain controller and is not a 'stand-alone'
-server then it must make a query to the domain controller for your domain.
-
-You need to specify the domain name with the user name when you attempt to
-use this type of a configuration. The domain name is specified with the
-local name in the chap-secrets file and with the option for the 'name'
-parameter.
-
-For example, the previous example would become:
-
-    DialupNT            domain\\customer47   foobar
-    domain\\customer47  DialupNT             foobar
-
-and
-
-    pppd name 'domain\\customer47' remotename DialupNT <other options>
-
-or add:
-
-    name domain\\customer47
-    remotename DialupNT
-
-when the Windows NT domain name is simply called 'domain'.
-
-
-TROUBLESHOOTING
-
-Assuming that everything else has been configured correctly for PPP and
-CHAP, the MS-CHAP-specific problems you're likely to encounter are mostly
-related to your Windows NT account and its settings.  A Microsoft server
-returns error codes in its CHAP response.  The following are extracted from
-Microsoft's "chapexts.txt" file referenced above:
-
- 646 ERROR_RESTRICTED_LOGON_HOURS
- 647 ERROR_ACCT_DISABLED
- 648 ERROR_PASSWD_EXPIRED
- 649 ERROR_NO_DIALIN_PERMISSION
- 691 ERROR_AUTHENTICATION_FAILURE
- 709 ERROR_CHANGING_PASSWORD
-
-You'll see these in your pppd log as a line similar to:
-
-   Remote message: E=649 R=0
-
-The "E=" is the error number from the table above, and the "R=" flag
-indicates whether the error is transient and the client should retry.  If
-you consistently get error 691, then either you're using the wrong account
-name/password, or the DES library or MD4 hashing (in md4.c) aren't working
-properly.  Verify your account name and password (use a Windows NT or
-Windows 95 system to dial-in if you have one available).  If that checks
-out, test the DES library with the "destest" program included with the DES
-library.  If DES checks out, the md4.c routines are probably failing
-(system byte ordering may be a problem) or my code is screwing up.  I've
-only got access to a Linux system, so you're on your own for anything else.
-
-Another thing that might cause problems is that some RAS servers won't
-respond at all to LCP config requests without seeing the word "CLIENT"
-from the other end.  If you see pppd sending out LCP config requests
-without getting any reply, try putting something in your chat script
-to send the word CLIENT after the modem has connected.
-
-If everything compiles cleanly, but fails at authentication time, then
-it might be a case of the MD4 or DES code screwing up.  The following
-small program can be used to test the MS-CHAP code to see if it
-produces a known response:
-
------------------
-#include <stdio.h>
-
-#include "pppd.h"
-#include "chap.h"
-#include "chap_ms.h"
-
-int main(argc, argv)
-    int     argc;
-    char    *argv[];
-{
-    u_char          challenge[8];
-    int             challengeInt[sizeof(challenge)];
-    chap_state      cstate;
-    int             i;
-
-    if (argc != 3) {
-        fprintf(stderr, "Usage: %s <16-hexchar challenge> <password>\n",
-        argv[0]); exit(1);
-    }
-
-    sscanf(argv[1], "%2x%2x%2x%2x%2x%2x%2x%2x",
-           challengeInt + 0, challengeInt + 1, challengeInt + 2,
-           challengeInt + 3, challengeInt + 4, challengeInt + 5,
-           challengeInt + 6, challengeInt + 7);
-
-    for (i = 0; i < sizeof(challenge); i++)
-        challenge[i] = (u_char)challengeInt[i];
-
-    ChapMS(&cstate, challenge, sizeof(challenge), argv[2], strlen(argv[2]));
-    printf("Response length is %d, response is:", cstate.resp_length);
-
-    for (i = 0; i < cstate.resp_length; i++) {
-        if (i % 8 == 0)
-            putchar('\n');
-        printf("%02X ", (unsigned int)cstate.response[i]);
-    }
-
-    putchar('\n');
-
-    exit(0);
-}
--------------
-
-This needs to link against chap_ms.o, md4.o, and the DES library.  When 
-you run it with the command line:
-
- $ testchap 00000000000000000000000000000000 hello
-
-it should output the following:
-
- Response length is 49, response is:
- 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00
- F4 D9 9D AF 82 64 DC 3C
- 53 F9 BC 92 14 B5 5D 9E
- 78 C4 21 48 9D B7 A8 B4
- 01
-
-if not, then either the DES library is not working, the MD4 code isn't 
-working, or there are some problems with the port of the code in 
-chap_ms.c.
-
-
-STILL TO DO
-
-A site using only MS-CHAP to authenticate has no need to store cleartext
-passwords in the "chap-secrets" file.  A utility that spits out the ASCII
-hex MD4 hash of a given password would be nice, and would allow that hash
-to be used in chap-secrets in place of the password.  The code to do this
-could quite easily be lifted from chap_ms.c (you have to convert the
-password to Unicode before hashing it).  The chap_ms.c file would also have
-to be changed to recognize a password hash (16 binary bytes == 32 ASCII hex
-characters) and skip the hashing stage.
-
-A server implementation would allow MS-CHAP to be used with Windows NT and
-Windows 95 clients for enhanced security.  Some new command-line options
-would be required, as would code to generate the Challenge packet and
-verify the response.  Most of the helper functions are in place, so this
-shouldn't be too hard for someone to add.
diff --git a/mdk-stage1/ppp/README.cbcp b/mdk-stage1/ppp/README.cbcp
deleted file mode 100644
index 6f7b7685e..000000000
--- a/mdk-stage1/ppp/README.cbcp
+++ /dev/null
@@ -1,97 +0,0 @@
-	     Microsoft Call Back Configuration Protocol.
-			by Pedro Roque Marques
-			(updated by Paul Mackerras)
-
-The CBCP is a method by which the Microsoft Windows NT Server may
-implement additional security. It is possible to configure the server
-in such a manner so as to require that the client systems which
-connect with it are required that following a valid authentication to
-leave a method by which the number may be returned call.
-
-It is a requirement of servers so configured that the protocol be
-exchanged.
-
-So, this set of patches may be applied to the pppd process to enable
-the cbcp client *only* portion of the specification. It is primarily
-meant to permit connection with Windows NT Servers.
-
-The ietf-working specification may be obtained from ftp.microsoft.com
-in the developr/rfc directory.
-
-The ietf task group has decided to recommend that the LCP sequence be
-extended to permit the callback operation. For this reason, these
-patches are not 'part' of pppd but are an adjunct to the code.
-
-To enable CBCP support, all that is required is to change the
-appropriate Makefile in the pppd subdirectory to add "-DCBCP_SUPPORT"
-to the CFLAGS definition and add cbcp.o to the list of object files,
-and then recompile pppd.  The patch below does this for Makefile.bsd
-and Makefile.linux.
-
-
---------------------------------cut here-------------------------------
-diff -r -c ppp-2.3.orig/pppd/Makefile.bsd ppp-2.3/pppd/Makefile.bsd
-*** ppp-2.3.orig/pppd/Makefile.bsd	Tue Oct  8 13:33:33 1996
---- ppp-2.3/pppd/Makefile.bsd	Fri Apr 11 23:59:15 1997
-***************
-*** 4,14 ****
-  # -D_BITYPES is for FreeBSD, which doesn't define anything to
-  # tell us that u_int32_t gets defined if <sys/types.h> is included.
-  # Remove for older *BSD systems for which this isn't true.
-! CFLAGS+= -g -I.. -DHAVE_PATHS_H -D_BITYPES
-  
-  PROG=	pppd
-  SRCS=	main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-! 	demand.c auth.c options.c sys-bsd.c
-  MAN=	pppd.cat8
-  MAN8=	pppd.8
-  BINMODE=4555
---- 4,14 ----
-  # -D_BITYPES is for FreeBSD, which doesn't define anything to
-  # tell us that u_int32_t gets defined if <sys/types.h> is included.
-  # Remove for older *BSD systems for which this isn't true.
-! CFLAGS+= -I.. -DHAVE_PATHS_H -D_BITYPES -DCBCP_SUPPORT
-  
-  PROG=	pppd
-  SRCS=	main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-! 	demand.c auth.c options.c sys-bsd.c cbcp.c
-  MAN=	pppd.cat8
-  MAN8=	pppd.8
-  BINMODE=4555
-diff -r -c ppp-2.3.orig/pppd/Makefile.linux ppp-2.3/pppd/Makefile.linux
-*** ppp-2.3.orig/pppd/Makefile.linux	Tue Oct  8 15:42:41 1996
---- ppp-2.3/pppd/Makefile.linux	Sat Apr 12 00:02:28 1997
-***************
-*** 14,20 ****
-  	   ipxcp.h cbcp.h
-  MANPAGES = pppd.8
-  PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-! 	   auth.o options.o demand.o sys-linux.o ipxcp.o
-  
-  all: pppd
-  
---- 14,20 ----
-  	   ipxcp.h cbcp.h
-  MANPAGES = pppd.8
-  PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-! 	   auth.o options.o demand.o sys-linux.o ipxcp.o cbcp.o
-  
-  all: pppd
-  
-***************
-*** 36,42 ****
-  #INCLUDE_DIRS= -I/usr/include -I..
-  INCLUDE_DIRS=
-  
-! COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE
-  
-  CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-  
---- 36,42 ----
-  #INCLUDE_DIRS= -I/usr/include -I..
-  INCLUDE_DIRS=
-  
-! COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DCBCP_SUPPORT
-  
-  CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-  
diff --git a/mdk-stage1/ppp/README.linux b/mdk-stage1/ppp/README.linux
deleted file mode 100644
index 62ed9ca7f..000000000
--- a/mdk-stage1/ppp/README.linux
+++ /dev/null
@@ -1,297 +0,0 @@
-		PPP for Linux
-		-------------
-
-		Paul Mackerras
-		8 March 2001
-
-		for ppp-2.4.1
-
-1. Introduction
----------------
-
-The Linux PPP implementation includes both kernel and user-level
-parts.  This package contains the user-level part, which consists of
-the PPP daemon (pppd) and associated utilities.  In the past this
-package has contained updated kernel drivers.  This is no longer
-necessary, as the current 2.2 and 2.4 kernel sources contain
-up-to-date drivers.
-
-The Linux PPP implementation is capable of being used both for
-initiating PPP connections (as a `client') or for handling incoming
-PPP connections (as a `server').  Note that this is an operational
-distinction, based on how the connection is created, rather than a
-distinction that is made in the PPP protocols themselves.
-
-Mostly this package is used for PPP connections over modems connected
-via asynchronous serial ports, so this guide concentrates on this
-situation.
-
-The PPP protocol consists of two parts.  One is a scheme for framing
-and encoding packets, the other is a series of protocols called LCP,
-IPCP, PAP and CHAP, for negotiating link options and for
-authentication.  This package similarly consists of two parts: a
-kernel module which handles PPP's low-level framing protocol, and a
-user-level program called pppd which implements PPP's negotiation
-protocols.
-
-The kernel module assembles/disassembles PPP frames, handles error
-detection, and forwards packets between the serial port and either the
-kernel network code or the user-level program pppd.  IP packets go
-directly to the kernel network code.  So once pppd has negotiated the
-link, it in practice lies completely dormant until you want to take
-the link down, when it negotiates a graceful disconnect.
-
-
-2. Installation
----------------
-
-2.1 Kernel driver
-
-Assuming you are running a recent 2.2 or 2.4 (or later) series kernel,
-the kernel source code will contain an up-to-date kernel PPP driver.
-If the PPP driver was included in your kernel configuration when your
-kernel was built, then you only need to install the user-level
-programs.  Otherwise you will need to get the source tree for your
-kernel version, configure it with PPP included, and recompile.  Most
-Linux distribution vendors ship kernels with PPP included in the
-configuration.
-
-The PPP driver can be either compiled into the kernel or compiled as a
-kernel module.  If it is compiled into the kernel, the PPP driver is
-included in the kernel image which is loaded at boot time.  If it is
-compiled as a module, the PPP driver is present in one or more files
-under /lib/modules and is loaded into the kernel when needed.
-
-The 2.2 series kernels contain an older version of the kernel PPP
-driver, one which doesn't support multilink.  If you want multilink,
-you need to run the latest 2.4 series kernel.  The kernel PPP driver
-was completely rewritten for the 2.4 series kernels to support
-multilink and to allow it to operate over diverse kinds of
-communication medium (the 2.2 driver only operates over serial ports
-and devices which look like serial ports, such as pseudo-ttys).
-
-Under the 2.2 kernels, if PPP is compiled as a module, the PPP driver
-modules should be present in the /lib/modules/`uname -r`/net directory
-(where `uname -r` represents the kernel version number).  The PPP
-driver module itself is called ppp.o, and there will usually be
-compression modules there, ppp_deflate.o and bsd_comp.o, as well as
-slhc.o, which handles TCP/IP header compression.  If the PPP driver is
-compiled into the kernel, the compression code will still be compiled
-as modules, for kernels before 2.2.17pre12.  For 2.2.17pre12 and later,
-if the PPP driver is compiled in, the compression code will also.
-
-Under the 2.4 kernels, there are two PPP modules, ppp_generic.o and
-ppp_async.o, plus the compression modules (ppp_deflate.o, bsd_comp.o
-and slhc.o).  If the PPP generic driver is compiled into the kernel,
-the other four can then be present either as modules or compiled into
-the kernel.  There is a sixth module, ppp_synctty.o, which is used for
-synchronous tty devices such as high-speed WAN adaptors.
-
-
-2.2 User-level programs
-
-If you obtained this package in .rpm or .deb format, you simply follow
-the usual procedure for installing the package.
-
-If you are using the .tar.gz form of this package, then cd into the
-ppp-2.4.1b1 directory you obtained by unpacking the archive and issue
-the following commands:
-
-$ ./configure
-$ make
-# make install
-
-The `make install' has to be done as root.  This makes and installs
-four programs and their man pages: pppd, chat, pppstats and pppdump.
-If the /etc/ppp configuration directory doesn't exist, the `make
-install' step will create it and install some default configuration
-files.
-
-
-2.3 System setup for 2.4 kernels
-
-Under the 2.4 series kernels, pppd needs to be able to open /dev/ppp,
-character device (108,0).  If you are using devfs (the device
-filesystem), the /dev/ppp node will automagically appear when the
-ppp_generic module is loaded, or at startup if ppp_generic is compiled
-in.
-
-If you have ppp_generic as a module, and you are using devfsd (the
-devfs daemon), you will need to add a line like this to your
-/etc/devfsd.conf:
-
-LOOKUP		ppp		MODLOAD
-
-Otherwise you will need to create a /dev/ppp device node with the
-commands:
-
-# mknod /dev/ppp c 108 0
-# chmod 600 /dev/ppp
-
-If you use module autoloading and have PPP as a module, you will need
-to add the following to your /etc/modules.conf or /etc/conf.modules:
-
-alias /dev/ppp		ppp_generic
-alias char-major-108	ppp_generic
-alias tty-ldisc-3	ppp_async
-alias tty-ldisc-14	ppp_synctty
-alias ppp-compress-21	bsd_comp
-alias ppp-compress-24	ppp_deflate
-alias ppp-compress-26	ppp_deflate
-
-
-2.4 System setup under 2.2 series kernels
-
-Under the 2.2 series kernels, you should add the following to your
-/etc/modules.conf or /etc/conf.modules:
-
-alias tty-ldisc-3	ppp
-alias ppp-compress-21	bsd_comp
-alias ppp-compress-24	ppp_deflate
-alias ppp-compress-26	ppp_deflate
-
-
-3. Getting help with problems
------------------------------
-
-If you have problems with your PPP setup, or you just want to ask some
-questions, or better yet if you can help others with their PPP
-questions, then you should join the linux-ppp mailing list.  Send an
-email to majordomo@vger.kernel.org with a line in the body saying
-
-subscribe linux-ppp
-
-To leave the mailing list, send an email to majordomo@vger.kernel.org
-with a line in the body saying
-
-unsubscribe linux-ppp
-
-To send a message to the list, email it to linux-ppp@vger.kernel.org.
-You don't have to be subscribed to send messages to the list.
-
-You can also email me (paulus@linuxcare.com.au) but I am overloaded
-with email and I can't respond to most messages I get in a timely
-fashion.
-
-There are also several relevant news groups, such as comp.protocols.ppp,
-comp.os.linux.networking, or comp.os.linux.setup.
-
-
-4. Configuring your dial-out PPP connections
---------------------------------------------
-
-Some Linux distribution makers include tools in their distributions
-for setting up PPP connections.  For example, for Red Hat Linux and
-derivatives, you should probably use linuxconf or netcfg to set up
-your PPP connections.
-
-The two main windowing environments for Linux, KDE and Gnome, both
-come with GUI utilities for configuring and controlling PPP dial-out
-connections.  They are convenient and relatively easy to configure.
-
-A third alternative is to use a PPP front-end package such as wvdial
-or ezppp.  These also will handle most of the details of talking to
-the modem and setting up the PPP connection for you.
-
-Assuming that you don't want to use any of these tools, you want to
-set up the configuration manually yourself, then read on.  This
-document gives a brief description and example.  More details can be
-found by reading the pppd and chat man pages and the PPP-HOWTO.
-
-We assume that you have a modem that uses the Hayes-compatible AT
-command set connected to an async serial port (e.g. /dev/ttyS0) and
-that you are dialling out to an ISP.  
-
-The trickiest and most variable part of setting up a dial-out PPP
-connection is the part which involves getting the modem to dial and
-then invoking PPP service at the far end.  Generally, once both ends
-are talking PPP the rest is relatively straightforward.
-
-Now in fact pppd doesn't know anything about how to get modems to dial
-or what you have to say to the system at the far end to get it to talk
-PPP.  That's handled by an external program such as chat, specified
-with the connect option to pppd.  Chat takes a series of strings to
-expect from the modem interleaved with a series of strings to send to
-the modem.  See the chat man page for more information.  Here is a
-simple example for connecting to an ISP, assuming that the ISP's
-system starts talking PPP as soon as it answers the phone:
-
-pppd connect 'chat -v "" AT OK ATDT5551212 ~' \
-	/dev/ttyS0 57600 crtscts debug defaultroute
-
-Going through pppd's options in order:
-    connect 'chat ...'  This gives a command to run to contact the
-    PPP server.  Here the supplied 'chat' program is used to dial a
-    remote computer.  The whole command is enclosed in single quotes
-    because pppd expects a one-word argument for the 'connect' option.
-    The options to 'chat' itself are:
-
-         -v            verbose mode; log what we do to syslog
-         ""            don't wait for any prompt, but instead...
-	 AT	       send the string "AT"
-	 OK	       expect the response "OK", then
-         ATDT5551212   dial the modem, then
-         ~             wait for a ~ character, indicating the start
-		       of a PPP frame from the server
-
-    /dev/ttyS0	       specifies which serial port the modem is connected to
-    57600	       specifies the baud rate to use
-    crtscts	       use hardware flow control using the RTS & CTS signals
-    debug	       log the PPP negotiation with syslog
-    defaultroute       add default network route via the PPP link
-
-Pppd will write error messages and debugging logs to the syslogd
-daemon using the facility name "daemon".  These messages may already
-be logged to the console or to a file like /var/log/messages; consult
-your /etc/syslog.conf file to see.  If you want to make all pppd
-messages go to a file such as /var/log/ppp-debug, add the line
-
-daemon.*					/var/log/ppp-debug
-        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-           This is one or more tabs. Do not use spaces.
-
-to syslog.conf; make sure to put one or more TAB characters (not
-spaces!) between the two fields.  Then you need to create an empty
-/var/log/ppp-debug file with a command such as
-
-	touch /var/log/ppp-debug
-
-and then restart syslogd, usually by sending it a SIGHUP signal with a
-command like this:
-
-	killall -HUP syslogd
-
-
-4.1 Is the link up?
-
-The main way to tell if your PPP link is up and operational is the
-ifconfig ("interface configuration") command.  Type
-
-	/sbin/ifconfig
-
-at a shell prompt.  It should print a list of interfaces including one
-like this example:
-
-ppp0      Link encap Point-to-Point Protocol
-          inet addr 192.76.32.3  P-t-P 129.67.1.165  Mask 255.255.255.0
-          UP POINTOPOINT RUNNING  MTU 1500  Metric 1
-          RX packets 33 errors 0 dropped 0 overrun 0
-          TX packets 42 errors 0 dropped 0 overrun 0
-
-Assuming that ifconfig shows the ppp network interface, you can test
-the link using the ping command like this:
-
-	/sbin/ping -c 3 129.67.1.165
-
-where the address you give is the address shown as the P-t-P address
-in the ifconfig output.  If the link is operating correctly, you
-should see output like this:
-
-  PING 129.67.1.165 (129.67.1.165): 56 data bytes
-  64 bytes from 129.67.1.165: icmp_seq=0 ttl=255 time=268 ms
-  64 bytes from 129.67.1.165: icmp_seq=1 ttl=255 time=247 ms
-  64 bytes from 129.67.1.165: icmp_seq=2 ttl=255 time=266 ms
-  --- 129.67.1.165 ping statistics ---
-  3 packets transmitted, 3 packets received, 0% packet loss
-  round-trip min/avg/max = 247/260/268 ms
-
diff --git a/mdk-stage1/ppp/README.sol2 b/mdk-stage1/ppp/README.sol2
deleted file mode 100644
index 4c862208f..000000000
--- a/mdk-stage1/ppp/README.sol2
+++ /dev/null
@@ -1,220 +0,0 @@
-This file describes the installation process for ppp-2.3 on systems
-running Solaris 2.  The Solaris 2 and SVR4 ports share a lot of code
-but are not identical.  The STREAMS kernel modules and driver for
-Solaris 2 are in the svr4 directory (and use some code from the
-modules directory).
-
-NOTE: Although the kernel driver and modules have been designed to
-operate correctly on SMP systems, they have not been extensively
-tested on SMP machines.  Some users of SMP Solaris x86 systems have
-reported system problems apparently linked to the use of previous
-versions of this software.  I believe these problems have been fixed.
-
-
-Installation.
-*************
-
-1. Run the configure script and make the user-level programs and the
-kernel modules.
-
-	./configure
-	make
-
-If you wish to use gcc (or another compiler) instead of Sun's cc, edit
-the svr4/Makedefs file and uncomment the definition of CC.  You can
-also change the options passed to the C compiler by editing the COPTS
-definition.
-
-2. Install the programs and kernel modules: as root, do
-
-	make install
-
-This installs pppd, chat and pppstats in /usr/local/bin and the kernel
-modules in /kernel/drv and /kernel/strmod, and creates the /etc/ppp
-directory and populates it with default configuration files.  You can
-change the installation directories by editing svr4/Makedefs.
-
-If your system normally has only one network interface, the default
-Solaris 2 system startup scripts will disable IP forwarding in the IP
-kernel module.  This will prevent the remote machine from using the
-local machine as a gateway to access other hosts.  The solution is to
-create an /etc/ppp/ip-up script containing something like this:
-
-	#!/bin/sh
-	/usr/sbin/ndd -set /dev/ip ip_forwarding 1
-
-See the man page for ip(7p) for details.
-
-Dynamic STREAMS Re-Plumbing Support.
-************************************
-
-Solaris 8 includes dynamic re-plumbing support. With this, modules
-below ip can be inserted, or removed, without having the ip stream be
-unplumbed, and re-plumbed again. All states in ip for an interface
-will therefore now be preserved. Users can install (or upgrade)
-modules like firewall, bandwidth manager, cache manager, tunneling,
-etc., without shutting the machine down.
-
-To support this, ppp driver now uses /dev/udp instead of /dev/ip for
-the ip stream. The interface stream (where ip module pushed on top of
-ppp) is then I_PLINK'ed below the ip stream. /dev/udp is used because
-STREAMS will not let a driver be PLINK'ed under itself, and /dev/ip is
-typically the driver at the bottom of the tunneling interfaces
-stream.  The mux ids of the ip streams are then added using
-SIOCSxIFMUXID ioctl.
-
-Users will be able to see the modules on the interface stream by, for
-example:
-
-    pikapon% ifconfig ppp modlist
-    0 ip
-    1 ppp
-
-Or arbitrarily if bandwidth manager and firewall modules are installed:
-
-    pikapon% ifconfig hme0 modlist
-    0 arp
-    1 ip
-    2 ipqos
-    3 firewall
-    4 hme
-
-Snoop Support.
-**************
-
-This version includes support for /usr/sbin/snoop. Tests has been done
-on both Solaris 7 and 8. Only IPv4 and IPv6 packets will be sent up to
-stream(s) marked as promiscuous, e.g, snoop et al.
-
-Users will be able to see the packets on the ppp interface by, for example:
-
-    snoop -d ppp0
-
-See the man page for snoop(1M) for details.
-
-IPv6 Support.
-*************
-
-This is for Solaris 8 and later.
-
-This version has been tested under Solaris 8 running IPv6. As of now,
-interoperability testing has only been done between Solaris machines
-in terms of the IPV6 NCP. An additional command line option for the
-pppd daemon has been added: ipv6cp-use-persistent.
-
-By default, compilation for IPv6 support is not enabled.  Uncomment
-the necessary lines in pppd/Makefile.sol2 to enable it. Once done, the
-quickest way to get IPv6 running is to add the following somewhere in
-the command line option:
-
-	+ipv6 ipv6cp-use-persistent
-
-The persistent id for the link-local address was added to conform to
-RFC 2472; such that if there's an EUI-48 available, use that to make
-up the EUI-64.  As of now, the Solaris implementation extracts the
-EUI-48 id from the Ethernet's MAC address (the ethernet interface
-needs to be up).  Future works might support other ways of obtaining a
-unique yet persistent id, such as EEPROM serial numbers, etc.
-
-There need not be any up/down scripts for ipv6, e.g. /etc/ppp/ipv6-up
-or /etc/ppp/ipv6-down, to trigger IPv6 neighbor discovery for auto
-configuration and routing.  The in.ndpd daemon will perform all of the
-necessary jobs in the background. /etc/inet/ndpd.conf can be further
-customized to enable the machine as an IPv6 router. See the man page
-for in.ndpd(1M) and ndpd.conf(4) for details.
-
-Below is a sample output of "ifconfig -a" with persistent link-local
-address.  Note the UNNUMBERED flag is set because hme0 and ppp0 both
-have identical link-local IPv6 addresses:
-
-lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
-        inet 127.0.0.1 netmask ff000000 
-hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
-        inet 129.146.86.248 netmask ffffff00 broadcast 129.146.86.255
-        ether 8:0:20:8d:38:c1 
-lo0: flags=2000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6> mtu 8252 index 1
-        inet6 ::1/128 
-hme0: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
-        ether 8:0:20:8d:38:c1 
-        inet6 fe80::a00:20ff:fe8d:38c1/10 
-hme0:1: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
-        inet6 fec0::56:a00:20ff:fe8d:38c1/64 
-hme0:2: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
-        inet6 2000::56:a00:20ff:fe8d:38c1/64 
-hme0:3: flags=2080841<UP,RUNNING,MULTICAST,ADDRCONF,IPv6> mtu 1500 index 2
-        inet6 2::56:a00:20ff:fe8d:38c1/64 
-ppp0: flags=10008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4> mtu 1500 index 12
-        inet 172.16.1.1 --> 172.16.1.2 netmask ffffff00 
-ppp0: flags=2202851<UP,POINTOPOINT,RUNNING,MULTICAST,UNNUMBERED,NONUD,IPv6> mtu 1500 index 12
-        inet6 fe80::a00:20ff:fe8d:38c1/10 --> fe80::a00:20ff:fe7a:24fb
-
-Note also that a plumbed ipv6 interface stream will exist throughout
-the entire PPP session in the case where the peer rejects IPV6CP,
-which further causes the interface state to stay down. Unplumbing will
-happen when the daemon exits. This is done by design and is not a bug.
-
-64-bit Support.
-***************
-
-This version has been tested under Solaris 7 (and Solaris 8 ) in both
-32- and 64-bits environments (Ultra class machines).  Installing the
-package by executing "make install" will result in additional files
-residing in /kernel/drv/sparcv9 and /kernel/strmod/sparcv9
-subdirectories.
-
-64-bit modules and driver have been compiled and tested using Sun's cc.
-
-Synchronous Serial Support.
-***************************
-
-This version has working but limited support for the on-board
-synchronous HDLC interfaces. It has been tested with the /dev/se_hdlc
-and /dev/zsh drivers.  Synchronous mode was tested with a Cisco
-router.
-
-There ppp daemon does not directly support controlling the serial
-interface.  It relies on the /usr/sbin/syncinit command to initialize
-HDLC mode and clocking.
-
-Some bugs remain: large sized frames are not sent/received properly,
-and may be related to the IP mtu.  This may be due to bugs in pppd
-itself, bugs in Solaris or the serial drivers.  The /dev/zsh driver
-seems more larger and can send/receive larger frames than the
-/dev/se_hdlc driver. There is a confirmed bug with NRZ/NRZI mode in
-the /dev/se_hdlc driver, and Solaris patch 104596-11 is needed to
-correct it. (However this patch seems to introduce other serial
-problems. If you don't apply the patch, the workaround is to change
-the nrzi mode to yes or no, whichever works)
-
-How to start pppd with synchronous support:
-
-#!/bin/sh
-
-local=1.1.1.1   # your ip address here
-baud=38400	# needed, but ignored by serial driver
-
-# Change to the correct serial driver/port
-#dev=/dev/zsh0
-dev=/dev/se_hdlc0
- 
-# Change the driver, nrzi mode, speed and clocking to match your setup
-# This configuration is for external clocking from the DCE
-connect="syncinit se_hdlc0 nrzi=no speed=64000 txc=rxc rxc=rxc"
- 
-/usr/sbin/pppd $dev sync $baud novj noauth $local: connect "$connect"
-
-
-Sample Cisco router config excerpt:
-
-!
-! Cisco router setup as DCE with RS-232 DCE cable
-! 
-!         
-interface Serial0
- ip address 1.1.1.2 255.255.255.0
- encapsulation ppp
- clockrate 64000
- no nrzi-encoding
- no shutdown
-!         
-
diff --git a/mdk-stage1/ppp/README.sunos4 b/mdk-stage1/ppp/README.sunos4
deleted file mode 100644
index b48aec377..000000000
--- a/mdk-stage1/ppp/README.sunos4
+++ /dev/null
@@ -1,62 +0,0 @@
-This file describes the installation process for ppp-2.3 on systems
-running SunOS 4.1.x (or the equivalent).
-
-The STREAMS modules in the sunos4 directory provide kernel support for
-PPP on SunOS 4.1.x systems.  They have been tested under SunOS 4.1.3
-on a SparcStation 1+.  They should work under earlier SunOS 4.1.x
-systems, but no guarantees are given.
-
-These modules are designed to be loaded into the running kernel using
-the `modload' command.
-
-
-Installation.
-*************
-
-1. Run the configure script and make the user-level programs and the
-kernel modules.
-
-	./configure
-	make
-
-If you wish to compile using gcc instead of cc, edit the
-sunos4/Makedefs file and uncomment the line saying "CC = gcc".  You
-can also change the C compiler options by editing the COPTS
-definition.
-
-2. Install the pppd, pppstats and chat programs and the loadable
-module object files (you need to be root to do this):
-
-	make install
-
-By default, the programs and the loadable module object files go into
-/usr/local/etc.  Doing `make install' also copies a script called
-ppp.INSTALL into /dev, and makes ppp.LOAD, ppp.UNLOAD, ppp.MKDEV and
-ppp.RMDEV links to it.  You can change the installation directories by
-editing sunos4/Makedefs.
-
-3. Load the ppp modules (you need to be root for this too):
-
-	/dev/ppp.LOAD
-
-You will want to do this in your /etc/rc.local file once you have
-everything installed.  I suggest you put something like the following
-in /etc/rc.local (or /etc/loadable, if you have one):
-
-	if [ -f /dev/ppp.AUTOLOAD ]; then
-		/dev/ppp.LOAD
-	fi
-
-and then create a /dev/ppp.AUTOLOAD file with the command
-
-	touch /dev/ppp.AUTOLOAD
-
-It is not advisable to unload the "if_ppp" module, because it creates
-network interface units, and SunOS does not provide any way to destroy
-network interfaces once created.  If you do unload it, the system will
-probably crash at some later stage.
-
-If you have previously had ppp-2.2 installed, you may have statements
-in your /etc/rc.local to load the ppp module.  You will need to remove
-those.  Having done this, you will need to reboot to remove the old
-ppp module and load the new modules.
diff --git a/mdk-stage1/ppp/SETUP b/mdk-stage1/ppp/SETUP
deleted file mode 100644
index fb28a2138..000000000
--- a/mdk-stage1/ppp/SETUP
+++ /dev/null
@@ -1,111 +0,0 @@
-		Configuring a PPP link.
-
-After you have compiled and installed this package, there are some
-configuration files which will generally need to be set up.  The
-pppd(8) man page is the best reference for the full details; this file
-outlines the configuration process for the most common case, where
-this package is being used to enable a machine to dial an ISP and
-connect to the internet.  The FAQ and README.linux files also provide
-useful information about setting up PPP.
-
-Dialling an ISP.
-****************
-
-Usually, an ISP will assign an IP address to your machine, and will
-refuse to authenticate itself to you.  Some ISPs require a username
-and password to be entered before PPP service commences, while others
-use PPP authentication (using either the PAP or CHAP protocols).
-
-The recommended way to set up to dial an ISP is for the system
-administrator to create a file under /etc/ppp/peers, named for the ISP
-that you will be dialling.  For example, suppose the file is called
-/etc/ppp/peers/isp.  This file would contain something like this:
-
-cua0		# modem is connected to /dev/cua0
-38400		# run the serial port at 38400 baud
-crtscts		# use hardware flow control
-noauth		# don't require the ISP to authenticate itself
-defaultroute	# use the ISP as our default route
-connect '/usr/sbin/chat -v -f /etc/ppp/chat-isp'
-
-If there are any other pppd options that should apply when calling
-this ISP, they can also be placed in this file.
-
-The /etc/ppp/chat-isp file named in the last line contains the script
-for chat(8) to use to dial the ISP and go through any username/
-password authentication required before PPP service starts.  Here is
-an example (for dialling an Annex terminal server):
-
-ABORT "NO CARRIER"
-ABORT "NO DIALTONE"
-ABORT "ERROR"
-ABORT "NO ANSWER"
-ABORT "BUSY"
-ABORT "Username/Password Incorrect"
-"" "at"
-OK "at&d2&c1"
-OK "atdt2479381"
-"name:" "^Uusername"
-"word:" "\qpassword"
-"annex" "ppp"
-"Switching to PPP-ppp-Switching to PPP"
-
-See the chat(8) man page for details of the script.  If you are not
-sure how the initial dialog with your ISP will go, you could use
-a terminal emulator such as kermit or minicom to go through the
-process manually.
-
-If your ISP requires PAP or CHAP authentication, you will have to
-create a line in /etc/ppp/pap-secrets or /etc/ppp/chap-secrets like
-this:
-
-myhostname	*	"password"
-
-(Replace myhostname with the hostname of your machine.)
-
-At this point, you can initiate the link with the command:
-
-/usr/sbin/pppd call isp
-
-(N.B.: pppd might be installed in a different directory on some
-systems).
-
-This will return to the shell prompt immediately, as pppd will detach
-itself from its controlling terminal.  (If you don't want it to do
-this, use the "nodetach" option.)
-
-Pppd will log messages describing the progress of the connection and
-any errors using the syslog facility (see the syslogd(8) and
-syslog.conf(5) man pages).  Pppd issues messages using syslog facility
-daemon (or local2 if it has been compiled with debugging enabled);
-chat uses facility local2.  It is often useful to see messages of
-priority notice or higher on the console.  To see these, find the line
-in /etc/syslog.conf which has /dev/console on the right-hand side, and
-add `daemon.notice' on the left.  This line should end up something
-like this:
-
-*.err;kern.debug;daemon,local2,auth.notice;mail.crit	/dev/console
-
-If you want to see more messages from pppd, request messages of
-priority info or higher for facility daemon, like this:
-
-*.err;kern.debug;daemon.info;local2,auth.notice;mail.crit  /dev/console
-
-It is also useful to add a line like this:
-
-daemon,local2.debug		/etc/ppp/ppp-log
-
-If you do this, you will need to create an empty /etc/ppp/ppp-log
-file.
-
-After modifying syslog.conf, you will then need to send a HUP signal
-to syslogd (or reboot).
-
-When you wish terminate the PPP link, you should send a TERM or INTR
-signal to pppd.  Pppd writes its process ID to a file called
-ppp<n>.pid in /var/run (or /etc/ppp on older systems such as SunOS or
-Ultrix).  Here <n> is the PPP interface unit number, which will be 0
-unless you have more than one PPP link running simultaneously.  Thus
-you can terminate the link with a command like
-
-	kill `cat /var/run/ppp0.pid`
diff --git a/mdk-stage1/ppp/chat/Makefile.linux b/mdk-stage1/ppp/chat/Makefile.linux
deleted file mode 100644
index 586cbd876..000000000
--- a/mdk-stage1/ppp/chat/Makefile.linux
+++ /dev/null
@@ -1,27 +0,0 @@
-#	$Id$
-
-CDEF1=	-DTERMIOS			# Use the termios structure
-CDEF2=	-DSIGTYPE=void			# Standard definition
-CDEF3=	-UNO_SLEEP			# Use the usleep function
-CDEF4=	-DFNDELAY=O_NDELAY		# Old name value
-CDEFS=	$(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4)
-
-CFLAGS=	$(RPM_OPT_FLAGS) $(CDEFS)
-
-INSTALL= install
-
-all:	chat
-
-chat:	chat.o
-	$(CC) -o chat chat.o
-
-chat.o:	chat.c
-	$(CC) -c $(CFLAGS) -o chat.o chat.c
-
-install: chat
-	mkdir -p $(BINDIR)
-	$(INSTALL) -s -c chat $(BINDIR)
-	$(INSTALL) -c -m 644 chat.8 $(MANDIR)/man8
-
-clean:
-	rm -f chat.o chat *~
diff --git a/mdk-stage1/ppp/chat/Makefile.linux.makeopt b/mdk-stage1/ppp/chat/Makefile.linux.makeopt
deleted file mode 100644
index 974680a93..000000000
--- a/mdk-stage1/ppp/chat/Makefile.linux.makeopt
+++ /dev/null
@@ -1,27 +0,0 @@
-#	$Id$
-
-CDEF1=	-DTERMIOS			# Use the termios structure
-CDEF2=	-DSIGTYPE=void			# Standard definition
-CDEF3=	-UNO_SLEEP			# Use the usleep function
-CDEF4=	-DFNDELAY=O_NDELAY		# Old name value
-CDEFS=	$(CDEF1) $(CDEF2) $(CDEF3) $(CDEF4)
-
-CFLAGS=	-O2 -g -pipe $(CDEFS)
-
-INSTALL= install
-
-all:	chat
-
-chat:	chat.o
-	$(CC) -o chat chat.o
-
-chat.o:	chat.c
-	$(CC) -c $(CFLAGS) -o chat.o chat.c
-
-install: chat
-	mkdir -p $(BINDIR)
-	$(INSTALL) -s -c chat $(BINDIR)
-	$(INSTALL) -c -m 644 chat.8 $(MANDIR)/man8
-
-clean:
-	rm -f chat.o chat *~
diff --git a/mdk-stage1/ppp/chat/Makefile.sol2 b/mdk-stage1/ppp/chat/Makefile.sol2
deleted file mode 100644
index f566cc68b..000000000
--- a/mdk-stage1/ppp/chat/Makefile.sol2
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for chat on Solaris 2
-#
-
-include ../solaris/Makedefs
-
-CFLAGS = $(COPTS) -DNO_USLEEP -DSOL2
-
-all:	chat
-
-chat: chat.o
-	$(CC) -o chat chat.o
-
-install: chat
-	$(INSTALL) -f $(BINDIR) chat
-	$(INSTALL) -m 444 -f $(MANDIR)/man8 chat.8
-
-clean:
-	rm -f *~ *.o chat
diff --git a/mdk-stage1/ppp/chat/Makefile.sunos4 b/mdk-stage1/ppp/chat/Makefile.sunos4
deleted file mode 100644
index b3507360e..000000000
--- a/mdk-stage1/ppp/chat/Makefile.sunos4
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Makefile for chat on suns
-#
-
-include ../sunos4/Makedefs
-
-CFLAGS = -DSUNOS $(COPTS)
-
-all:	chat
-
-chat: chat.o
-	$(CC) -o chat chat.o
-
-install: chat
-	$(INSTALL) -c chat $(BINDIR)/chat
-	$(INSTALL) -c -m 444 chat.8 $(MANDIR)/man8/chat.8
-
-clean:
-	rm -f *~ *.o chat
diff --git a/mdk-stage1/ppp/chat/chat.8 b/mdk-stage1/ppp/chat/chat.8
deleted file mode 100644
index 8d2029609..000000000
--- a/mdk-stage1/ppp/chat/chat.8
+++ /dev/null
@@ -1,515 +0,0 @@
-.\" -*- nroff -*-
-.\" manual page [] for chat 1.8
-.\" $Id$
-.\" SH section heading
-.\" SS subsection heading
-.\" LP paragraph
-.\" IP indented paragraph
-.\" TP hanging label
-.TH CHAT 8 "22 May 1999" "Chat Version 1.22"
-.SH NAME
-chat \- Automated conversational script with a modem
-.SH SYNOPSIS
-.B chat
-[
-.I options
-]
-.I script
-.SH DESCRIPTION
-.LP
-The \fIchat\fR program defines a conversational exchange between the
-computer and the modem. Its primary purpose is to establish the
-connection between the Point-to-Point Protocol Daemon (\fIpppd\fR) and
-the remote's \fIpppd\fR process.
-.SH OPTIONS
-.TP
-.B -f \fI<chat file>
-Read the chat script from the chat \fIfile\fR. The use of this option
-is mutually exclusive with the chat script parameters. The user must
-have read access to the file. Multiple lines are permitted in the
-file. Space or horizontal tab characters should be used to separate
-the strings.
-.TP
-.B -t \fI<timeout>
-Set the timeout for the expected string to be received. If the string
-is not received within the time limit then the reply string is not
-sent. An alternate reply may be sent or the script will fail if there
-is no alternate reply string. A failed script will cause the
-\fIchat\fR program to terminate with a non-zero error code.
-.TP
-.B -r \fI<report file>
-Set the file for output of the report strings. If you use the keyword
-\fIREPORT\fR, the resulting strings are written to this file. If this
-option is not used and you still use \fIREPORT\fR keywords, the
-\fIstderr\fR file is used for the report strings.
-.TP
-.B -e
-Start with the echo option turned on. Echoing may also be turned on
-or off at specific points in the chat script by using the \fIECHO\fR
-keyword. When echoing is enabled, all output from the modem is echoed
-to \fIstderr\fR.
-.TP
-.B -E
-Enables environment variable substituion within chat scripts using the
-standard \fI$xxx\fR syntax.
-.TP
-.B -v
-Request that the \fIchat\fR script be executed in a verbose mode. The
-\fIchat\fR program will then log the execution state of the chat
-script as well as all text received from the modem and the output
-strings sent to the modem.  The default is to log through the SYSLOG;
-the logging method may be altered with the -S and -s flags.
-.TP
-.B -V
-Request that the \fIchat\fR script be executed in a stderr verbose
-mode. The \fIchat\fR program will then log all text received from the
-modem and the output strings sent to the modem to the stderr device. This
-device is usually the local console at the station running the chat or
-pppd program.
-.TP
-.B -s
-Use stderr.  All log messages from '-v' and all error messages will be
-sent to stderr.
-.TP
-.B -S
-Do not use the SYSLOG.  By default, error messages are sent to the
-SYSLOG.  The use of -S will prevent both log messages from '-v' and
-error messages from being sent to the SYSLOG.
-.TP
-.B -T \fI<phone number>
-Pass in an arbitary string, usually a phone number, that will be
-substituted for the \\T substitution metacharacter in a send string.
-.TP
-.B -U \fI<phone number 2>
-Pass in a second string, usually a phone number, that will be
-substituted for the \\U substitution metacharacter in a send string.
-This is useful when dialing an ISDN terminal adapter that requires two 
-numbers.
-.TP
-.B script
-If the script is not specified in a file with the \fI-f\fR option then
-the script is included as parameters to the \fIchat\fR program.
-.SH CHAT SCRIPT
-.LP
-The \fIchat\fR script defines the communications.
-.LP
-A script consists of one or more "expect-send" pairs of strings,
-separated by spaces, with an optional "subexpect-subsend" string pair,
-separated by a dash as in the following example:
-.IP
-ogin:-BREAK-ogin: ppp ssword: hello2u2
-.LP
-This line indicates that the \fIchat\fR program should expect the string
-"ogin:". If it fails to receive a login prompt within the time interval
-allotted, it is to send a break sequence to the remote and then expect the
-string "ogin:". If the first "ogin:" is received then the break sequence is
-not generated.
-.LP
-Once it received the login prompt the \fIchat\fR program will send the
-string ppp and then expect the prompt "ssword:". When it receives the
-prompt for the password, it will send the password hello2u2.
-.LP
-A carriage return is normally sent following the reply string. It is not
-expected in the "expect" string unless it is specifically requested by using
-the \\r character sequence.
-.LP
-The expect sequence should contain only what is needed to identify the
-string. Since it is normally stored on a disk file, it should not contain
-variable information. It is generally not acceptable to look for time
-strings, network identification strings, or other variable pieces of data as
-an expect string.
-.LP
-To help correct for characters which may be corrupted during the initial
-sequence, look for the string "ogin:" rather than "login:". It is possible
-that the leading "l" character may be received in error and you may never
-find the string even though it was sent by the system. For this reason,
-scripts look for "ogin:" rather than "login:" and "ssword:" rather than
-"password:".
-.LP
-A very simple script might look like this:
-.IP
-ogin: ppp ssword: hello2u2
-.LP
-In other words, expect ....ogin:, send ppp, expect ...ssword:, send hello2u2.
-.LP
-In actual practice, simple scripts are rare. At the vary least, you
-should include sub-expect sequences should the original string not be
-received. For example, consider the following script:
-.IP
-ogin:--ogin: ppp ssword: hello2u2
-.LP
-This would be a better script than the simple one used earlier. This would look
-for the same login: prompt, however, if one was not received, a single
-return sequence is sent and then it will look for login: again. Should line
-noise obscure the first login prompt then sending the empty line will
-usually generate a login prompt again.
-.SH COMMENTS
-Comments can be embedded in the chat script. A comment is a line which
-starts with the \fB#\fR (hash) character in column 1. Such comment
-lines are just ignored by the chat program. If a '#' character is to
-be expected as the first character of the expect sequence, you should
-quote the expect string.
-If you want to wait for a prompt that starts with a # (hash)
-character, you would have to write something like this:
-.IP
-# Now wait for the prompt and send logout string
-.br
-\'# ' logout
-.LP
-
-.SH SENDING DATA FROM A FILE
-If the string to send starts with an at sign (@), the rest of the
-string is taken to be the name of a file to read to get the string to
-send.  If the last character of the data read is a newline, it is
-removed.  The file can be a named pipe (or fifo) instead of a regular
-file.  This provides a way for \fBchat\fR to communicate with another
-program, for example, a program to prompt the user and receive a
-password typed in.
-.LP
-
-.SH ABORT STRINGS
-Many modems will report the status of the call as a string. These
-strings may be \fBCONNECTED\fR or \fBNO CARRIER\fR or \fBBUSY\fR. It
-is often desirable to terminate the script should the modem fail to
-connect to the remote. The difficulty is that a script would not know
-exactly which modem string it may receive. On one attempt, it may
-receive \fBBUSY\fR while the next time it may receive \fBNO CARRIER\fR.
-.LP
-These "abort" strings may be specified in the script using the \fIABORT\fR
-sequence. It is written in the script as in the following example:
-.IP
-ABORT BUSY ABORT 'NO CARRIER' '' ATZ OK ATDT5551212 CONNECT
-.LP
-This sequence will expect nothing; and then send the string ATZ. The
-expected response to this is the string \fIOK\fR. When it receives \fIOK\fR,
-the string ATDT5551212 to dial the telephone. The expected string is
-\fICONNECT\fR. If the string \fICONNECT\fR is received the remainder of the
-script is executed. However, should the modem find a busy telephone, it will
-send the string \fIBUSY\fR. This will cause the string to match the abort
-character sequence. The script will then fail because it found a match to
-the abort string. If it received the string \fINO CARRIER\fR, it will abort
-for the same reason. Either string may be received. Either string will
-terminate the \fIchat\fR script.
-.SH CLR_ABORT STRINGS
-This sequence allows for clearing previously set \fBABORT\fR strings.
-\fBABORT\fR strings are kept in an array of a pre-determined size (at
-compilation time); \fBCLR_ABORT\fR will reclaim the space for cleared
-entries so that new strings can use that space.
-.SH SAY STRINGS
-The \fBSAY\fR directive allows the script to send strings to the user
-at the terminal via standard error.  If \fBchat\fR is being run by
-pppd, and pppd is running as a daemon (detached from its controlling
-terminal), standard error will normally be redirected to the file
-/etc/ppp/connect-errors.
-.LP
-\fBSAY\fR strings must be enclosed in single or double quotes. If
-carriage return and line feed are needed in the string to be output,
-you must explicitely add them to your string.
-.LP
-The SAY strings could be used to give progress messages in sections of
-the script where you want to have 'ECHO OFF' but still let the user
-know what is happening.  An example is:
-.IP
-ABORT BUSY 
-.br
-ECHO OFF 
-.br
-SAY "Dialling your ISP...\\n" 
-.br
-\'' ATDT5551212 
-.br
-TIMEOUT 120
-.br
-SAY "Waiting up to 2 minutes for connection ... "
-.br
-CONNECT '' 
-.br
-SAY "Connected, now logging in ...\n"
-.br
-ogin: account
-.br
-ssword: pass
-.br
-$ \c
-SAY "Logged in OK ...\n"
-\fIetc ...\fR
-.LP
-This sequence will only present the SAY strings to the user and all
-the details of the script will remain hidden. For example, if the
-above script works, the user will see:
-.IP
-Dialling your ISP...
-.br
-Waiting up to 2 minutes for connection ... Connected, now logging in ...
-.br
-Logged in OK ...
-.LP
-
-.SH REPORT STRINGS
-A \fBreport\fR string is similar to the ABORT string. The difference
-is that the strings, and all characters to the next control character
-such as a carriage return, are written to the report file.
-.LP
-The report strings may be used to isolate the transmission rate of the
-modem's connect string and return the value to the chat user. The
-analysis of the report string logic occurs in conjunction with the
-other string processing such as looking for the expect string. The use
-of the same string for a report and abort sequence is probably not
-very useful, however, it is possible.
-.LP
-The report strings to no change the completion code of the program.
-.LP
-These "report" strings may be specified in the script using the \fIREPORT\fR
-sequence. It is written in the script as in the following example:
-.IP
-REPORT CONNECT ABORT BUSY '' ATDT5551212 CONNECT '' ogin: account
-.LP
-This sequence will expect nothing; and then send the string
-ATDT5551212 to dial the telephone. The expected string is
-\fICONNECT\fR. If the string \fICONNECT\fR is received the remainder
-of the script is executed. In addition the program will write to the
-expect-file the string "CONNECT" plus any characters which follow it
-such as the connection rate.
-.SH CLR_REPORT STRINGS
-This sequence allows for clearing previously set \fBREPORT\fR strings.
-\fBREPORT\fR strings are kept in an array of a pre-determined size (at
-compilation time); \fBCLR_REPORT\fR will reclaim the space for cleared
-entries so that new strings can use that space.
-.SH ECHO
-The echo options controls whether the output from the modem is echoed
-to \fIstderr\fR. This option may be set with the \fI-e\fR option, but
-it can also be controlled by the \fIECHO\fR keyword. The "expect-send"
-pair \fIECHO\fR \fION\fR enables echoing, and \fIECHO\fR \fIOFF\fR
-disables it. With this keyword you can select which parts of the
-conversation should be visible. For instance, with the following
-script:
-.IP
-ABORT   'BUSY'
-.br
-ABORT   'NO CARRIER'
-.br
-''      ATZ
-.br
-OK\\r\\n  ATD1234567
-.br
-\\r\\n    \\c
-.br
-ECHO    ON
-.br
-CONNECT \\c
-.br
-ogin:   account
-.LP
-all output resulting from modem configuration and dialing is not visible,
-but starting with the \fICONNECT\fR (or \fIBUSY\fR) message, everything
-will be echoed.
-.SH HANGUP
-The HANGUP options control whether a modem hangup should be considered
-as an error or not.  This option is useful in scripts for dialling
-systems which will hang up and call your system back.  The HANGUP
-options can be \fBON\fR or \fBOFF\fR.
-.br
-When HANGUP is set OFF and the modem hangs up (e.g., after the first
-stage of logging in to a callback system), \fBchat\fR will continue
-running the script (e.g., waiting for the incoming call and second
-stage login prompt). As soon as the incoming call is connected, you
-should use the \fBHANGUP ON\fR directive to reinstall normal hang up
-signal behavior.  Here is an (simple) example script:
-.IP
-ABORT   'BUSY'
-.br
-''      ATZ
-.br
-OK\\r\\n  ATD1234567
-.br
-\\r\\n    \\c
-.br
-CONNECT \\c
-.br
-\'Callback login:' call_back_ID
-.br
-HANGUP OFF
-.br
-ABORT "Bad Login"
-.br
-\'Callback Password:' Call_back_password
-.br
-TIMEOUT 120
-.br
-CONNECT \\c
-.br
-HANGUP ON
-.br
-ABORT "NO CARRIER"
-.br
-ogin:--BREAK--ogin: real_account
-.br
-\fIetc ...\fR
-.LP
-.SH TIMEOUT
-The initial timeout value is 45 seconds. This may be changed using the \fB-t\fR
-parameter.
-.LP
-To change the timeout value for the next expect string, the following
-example may be used:
-.IP
-ATZ OK ATDT5551212 CONNECT TIMEOUT 10 ogin:--ogin: TIMEOUT 5 assword: hello2u2
-.LP
-This will change the timeout to 10 seconds when it expects the login:
-prompt. The timeout is then changed to 5 seconds when it looks for the
-password prompt.
-.LP
-The timeout, once changed, remains in effect until it is changed again.
-.SH SENDING EOT
-The special reply string of \fIEOT\fR indicates that the chat program
-should send an EOT character to the remote. This is normally the
-End-of-file character sequence. A return character is not sent
-following the EOT.
-.PR
-The EOT sequence may be embedded into the send string using the
-sequence \fI^D\fR.
-.SH GENERATING BREAK
-The special reply string of \fIBREAK\fR will cause a break condition
-to be sent. The break is a special signal on the transmitter. The
-normal processing on the receiver is to change the transmission rate.
-It may be used to cycle through the available transmission rates on
-the remote until you are able to receive a valid login prompt.
-.PR
-The break sequence may be embedded into the send string using the
-\fI\\K\fR sequence.
-.SH ESCAPE SEQUENCES
-The expect and reply strings may contain escape sequences. All of the
-sequences are legal in the reply string. Many are legal in the expect.
-Those which are not valid in the expect sequence are so indicated.
-.TP
-.B ''
-Expects or sends a null string. If you send a null string then it will still
-send the return character. This sequence may either be a pair of apostrophe
-or quote characters.
-.TP
-.B \\\\b
-represents a backspace character.
-.TP
-.B \\\\c
-Suppresses the newline at the end of the reply string. This is the only
-method to send a string without a trailing return character. It must
-be at the end of the send string. For example,
-the sequence hello\\c will simply send the characters h, e, l, l, o.
-.I (not valid in expect.)
-.TP
-.B \\\\d
-Delay for one second. The program uses sleep(1) which will delay to a
-maximum of one second.
-.I (not valid in expect.)
-.TP
-.B \\\\K
-Insert a BREAK
-.I (not valid in expect.)
-.TP
-.B \\\\n
-Send a newline or linefeed character.
-.TP
-.B \\\\N
-Send a null character. The same sequence may be represented by \\0.
-.I (not valid in expect.)
-.TP
-.B \\\\p
-Pause for a fraction of a second. The delay is 1/10th of a second.
-.I (not valid in expect.)
-.TP
-.B \\\\q
-Suppress writing the string to the SYSLOG file. The string ?????? is
-written to the log in its place.
-.I (not valid in expect.)
-.TP
-.B \\\\r
-Send or expect a carriage return.
-.TP
-.B \\\\s
-Represents a space character in the string. This may be used when it
-is not desirable to quote the strings which contains spaces. The
-sequence 'HI TIM' and HI\\sTIM are the same.
-.TP
-.B \\\\t
-Send or expect a tab character.
-.TP
-.B \\\\T
-Send the phone number string as specified with the \fI-T\fR option
-.I (not valid in expect.)
-.TP
-.B \\\\U
-Send the phone number 2 string as specified with the \fI-U\fR option
-.I (not valid in expect.)
-.TP
-.B \\\\\\\\
-Send or expect a backslash character.
-.TP
-.B \\\\ddd
-Collapse the octal digits (ddd) into a single ASCII character and send that
-character.
-.I (some characters are not valid in expect.)
-.TP
-.B \^^C
-Substitute the sequence with the control character represented by C.
-For example, the character DC1 (17) is shown as \^^Q.
-.I (some characters are not valid in expect.)
-.SH ENVIRONMENT VARIABLES
-Environment variables are available within chat scripts, if  the \fI-E\fR
-option was specified in the command line. The metacharacter \fI$\fR is used
-to introduce the name of the environment variable to substitute. If the
-substition fails, because the requested environment variable is not set,
-\fInothing\fR is replaced for the variable.
-.SH TERMINATION CODES
-The \fIchat\fR program will terminate with the following completion
-codes.
-.TP
-.B 0
-The normal termination of the program. This indicates that the script
-was executed without error to the normal conclusion.
-.TP
-.B 1
-One or more of the parameters are invalid or an expect string was too
-large for the internal buffers. This indicates that the program as not
-properly executed.
-.TP
-.B 2
-An error occurred during the execution of the program. This may be due
-to a read or write operation failing for some reason or chat receiving
-a signal such as SIGINT.
-.TP
-.B 3
-A timeout event occurred when there was an \fIexpect\fR string without
-having a "-subsend" string. This may mean that you did not program the
-script correctly for the condition or that some unexpected event has
-occurred and the expected string could not be found.
-.TP
-.B 4
-The first string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 5
-The second string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 6
-The third string marked as an \fIABORT\fR condition occurred.
-.TP
-.B 7
-The fourth string marked as an \fIABORT\fR condition occurred.
-.TP
-.B ...
-The other termination codes are also strings marked as an \fIABORT\fR
-condition.
-.LP
-Using the termination code, it is possible to determine which event
-terminated the script. It is possible to decide if the string "BUSY"
-was received from the modem as opposed to "NO DIAL TONE". While the
-first event may be retried, the second will probably have little
-chance of succeeding during a retry.
-.SH SEE ALSO
-Additional information about \fIchat\fR scripts may be found with UUCP
-documentation. The \fIchat\fR script was taken from the ideas proposed
-by the scripts used by the \fIuucico\fR program.
-.LP
-uucico(1), uucp(1)
-.SH COPYRIGHT
-The \fIchat\fR program is in public domain. This is not the GNU public
-license. If it breaks then you get to keep both pieces.
diff --git a/mdk-stage1/ppp/chat/chat.c b/mdk-stage1/ppp/chat/chat.c
deleted file mode 100644
index 1b22907a8..000000000
--- a/mdk-stage1/ppp/chat/chat.c
+++ /dev/null
@@ -1,1756 +0,0 @@
-/*
- *	Chat -- a program for automatic session establishment (i.e. dial
- *		the phone and log in).
- *
- * Standard termination codes:
- *  0 - successful completion of the script
- *  1 - invalid argument, expect string too large, etc.
- *  2 - error on an I/O operation or fatal error condition.
- *  3 - timeout waiting for a simple string.
- *  4 - the first string declared as "ABORT"
- *  5 - the second string declared as "ABORT"
- *  6 - ... and so on for successive ABORT strings.
- *
- *	This software is in the public domain.
- *
- * -----------------
- *	22-May-99 added environment substitutuion, enabled with -E switch.
- *	Andreas Arens <andras@cityweb.de>.
- *
- *	12-May-99 added a feature to read data to be sent from a file,
- *	if the send string starts with @.  Idea from gpk <gpk@onramp.net>.
- *
- *	added -T and -U option and \T and \U substitution to pass a phone
- *	number into chat script. Two are needed for some ISDN TA applications.
- *	Keith Dart <kdart@cisco.com>
- *	
- *
- *	Added SAY keyword to send output to stderr.
- *      This allows to turn ECHO OFF and to output specific, user selected,
- *      text to give progress messages. This best works when stderr
- *      exists (i.e.: pppd in nodetach mode).
- *
- * 	Added HANGUP directives to allow for us to be called
- *      back. When HANGUP is set to NO, chat will not hangup at HUP signal.
- *      We rely on timeouts in that case.
- *
- *      Added CLR_ABORT to clear previously set ABORT string. This has been
- *      dictated by the HANGUP above as "NO CARRIER" (for example) must be
- *      an ABORT condition until we know the other host is going to close
- *      the connection for call back. As soon as we have completed the
- *      first stage of the call back sequence, "NO CARRIER" is a valid, non
- *      fatal string. As soon as we got called back (probably get "CONNECT"),
- *      we should re-arm the ABORT "NO CARRIER". Hence the CLR_ABORT command.
- *      Note that CLR_ABORT packs the abort_strings[] array so that we do not
- *      have unused entries not being reclaimed.
- *
- *      In the same vein as above, added CLR_REPORT keyword.
- *
- *      Allow for comments. Line starting with '#' are comments and are
- *      ignored. If a '#' is to be expected as the first character, the 
- *      expect string must be quoted.
- *
- *
- *		Francis Demierre <Francis@SwissMail.Com>
- * 		Thu May 15 17:15:40 MET DST 1997
- *
- *
- *      Added -r "report file" switch & REPORT keyword.
- *              Robert Geer <bgeer@xmission.com>
- *
- *      Added -s "use stderr" and -S "don't use syslog" switches.
- *              June 18, 1997
- *              Karl O. Pinc <kop@meme.com>
- *
- *
- *	Added -e "echo" switch & ECHO keyword
- *		Dick Streefland <dicks@tasking.nl>
- *
- *
- *	Considerable updates and modifications by
- *		Al Longyear <longyear@pobox.com>
- *		Paul Mackerras <paulus@cs.anu.edu.au>
- *
- *
- *	The original author is:
- *
- *		Karl Fox <karl@MorningStar.Com>
- *		Morning Star Technologies, Inc.
- *		1760 Zollinger Road
- *		Columbus, OH  43221
- *		(614)451-1883
- *
- */
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifndef lint
-static const char rcsid[] = "$Id$";
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-#include <time.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <syslog.h>
-
-#ifndef TERMIO
-#undef	TERMIOS
-#define TERMIOS
-#endif
-
-#ifdef TERMIO
-#include <termio.h>
-#endif
-#ifdef TERMIOS
-#include <termios.h>
-#endif
-
-#define	STR_LEN	1024
-
-#ifndef SIGTYPE
-#define SIGTYPE void
-#endif
-
-#undef __P
-#undef __V
-
-#ifdef __STDC__
-#include <stdarg.h>
-#define __V(x)	x
-#define __P(x)	x
-#else
-#include <varargs.h>
-#define __V(x)	(va_alist) va_dcl
-#define __P(x)	()
-#define const
-#endif
-
-#ifndef O_NONBLOCK
-#define O_NONBLOCK	O_NDELAY
-#endif
-
-#ifdef SUNOS
-extern int sys_nerr;
-extern char *sys_errlist[];
-#define memmove(to, from, n)	bcopy(from, to, n)
-#define strerror(n)		((unsigned)(n) < sys_nerr? sys_errlist[(n)] :\
-				 "unknown error")
-#endif
-
-/*************** Micro getopt() *********************************************/
-#define	OPTION(c,v)	(_O&2&&**v?*(*v)++:!c||_O&4?0:(!(_O&1)&& \
-				(--c,++v),_O=4,c&&**v=='-'&&v[0][1]?*++*v=='-'\
-				&&!v[0][1]?(--c,++v,0):(_O=2,*(*v)++):0))
-#define	OPTARG(c,v)	(_O&2?**v||(++v,--c)?(_O=1,--c,*v++): \
-				(_O=4,(char*)0):(char*)0)
-#define	OPTONLYARG(c,v)	(_O&2&&**v?(_O=1,--c,*v++):(char*)0)
-#define	ARG(c,v)	(c?(--c,*v++):(char*)0)
-
-static int _O = 0;		/* Internal state */
-/*************** Micro getopt() *********************************************/
-
-char *program_name;
-
-#define	MAX_ABORTS		50
-#define	MAX_REPORTS		50
-#define	DEFAULT_CHAT_TIMEOUT	45
-
-int echo          = 0;
-int verbose       = 0;
-int to_log        = 1;
-int to_stderr     = 0;
-int Verbose       = 0;
-int quiet         = 0;
-int report        = 0;
-int use_env       = 0;
-int exit_code     = 0;
-FILE* report_fp   = (FILE *) 0;
-char *report_file = (char *) 0;
-char *chat_file   = (char *) 0;
-char *phone_num   = (char *) 0;
-char *phone_num2  = (char *) 0;
-int timeout       = DEFAULT_CHAT_TIMEOUT;
-
-int have_tty_parameters = 0;
-
-#ifdef TERMIO
-#define term_parms struct termio
-#define get_term_param(param) ioctl(0, TCGETA, param)
-#define set_term_param(param) ioctl(0, TCSETA, param)
-struct termio saved_tty_parameters;
-#endif
-
-#ifdef TERMIOS
-#define term_parms struct termios
-#define get_term_param(param) tcgetattr(0, param)
-#define set_term_param(param) tcsetattr(0, TCSANOW, param)
-struct termios saved_tty_parameters;
-#endif
-
-char *abort_string[MAX_ABORTS], *fail_reason = (char *)0,
-	fail_buffer[50];
-int n_aborts = 0, abort_next = 0, timeout_next = 0, echo_next = 0;
-int clear_abort_next = 0;
-
-char *report_string[MAX_REPORTS] ;
-char  report_buffer[50] ;
-int n_reports = 0, report_next = 0, report_gathering = 0 ; 
-int clear_report_next = 0;
-
-int say_next = 0, hup_next = 0;
-
-void *dup_mem __P((void *b, size_t c));
-void *copy_of __P((char *s));
-void usage __P((void));
-void logf __P((const char *fmt, ...));
-void fatal __P((int code, const char *fmt, ...));
-SIGTYPE sigalrm __P((int signo));
-SIGTYPE sigint __P((int signo));
-SIGTYPE sigterm __P((int signo));
-SIGTYPE sighup __P((int signo));
-void unalarm __P((void));
-void init __P((void));
-void set_tty_parameters __P((void));
-void echo_stderr __P((int));
-void break_sequence __P((void));
-void terminate __P((int status));
-void do_file __P((char *chat_file));
-int  get_string __P((register char *string));
-int  put_string __P((register char *s));
-int  write_char __P((int c));
-int  put_char __P((int c));
-int  get_char __P((void));
-void chat_send __P((register char *s));
-char *character __P((int c));
-void chat_expect __P((register char *s));
-char *clean __P((register char *s, int sending));
-void break_sequence __P((void));
-void terminate __P((int status));
-void pack_array __P((char **array, int end));
-char *expect_strtok __P((char *, char *));
-int vfmtmsg __P((char *, int, const char *, va_list));	/* vsprintf++ */
-
-int main __P((int, char *[]));
-
-void *dup_mem(b, c)
-void *b;
-size_t c;
-{
-    void *ans = malloc (c);
-    if (!ans)
-	fatal(2, "memory error!");
-
-    memcpy (ans, b, c);
-    return ans;
-}
-
-void *copy_of (s)
-char *s;
-{
-    return dup_mem (s, strlen (s) + 1);
-}
-
-/*
- * chat [ -v ] [ -E ] [ -T number ] [ -U number ] [ -t timeout ] [ -f chat-file ] \
- * [ -r report-file ] \
- *		[...[[expect[-say[-expect...]] say expect[-say[-expect]] ...]]]
- *
- *	Perform a UUCP-dialer-like chat script on stdin and stdout.
- */
-int
-main(argc, argv)
-     int argc;
-     char **argv;
-{
-    int option;
-    char *arg;
-
-    program_name = *argv;
-    tzset();
-
-    while ((option = OPTION(argc, argv)) != 0) {
-	switch (option) {
-	case 'e':
-	    ++echo;
-	    break;
-
-	case 'E':
-	    ++use_env;
-	    break;
-
-	case 'v':
-	    ++verbose;
-	    break;
-
-	case 'V':
-	    ++Verbose;
-	    break;
-
-	case 's':
-	    ++to_stderr;
-	    break;
-
-	case 'S':
-	    to_log = 0;
-	    break;
-
-	case 'f':
-	    if ((arg = OPTARG(argc, argv)) != NULL)
-		    chat_file = copy_of(arg);
-	    else
-		usage();
-	    break;
-
-	case 't':
-	    if ((arg = OPTARG(argc, argv)) != NULL)
-		timeout = atoi(arg);
-	    else
-		usage();
-	    break;
-
-	case 'r':
-	    arg = OPTARG (argc, argv);
-	    if (arg) {
-		if (report_fp != NULL)
-		    fclose (report_fp);
-		report_file = copy_of (arg);
-		report_fp   = fopen (report_file, "a");
-		if (report_fp != NULL) {
-		    if (verbose)
-			fprintf (report_fp, "Opening \"%s\"...\n",
-				 report_file);
-		    report = 1;
-		}
-	    }
-	    break;
-
-	case 'T':
-	    if ((arg = OPTARG(argc, argv)) != NULL)
-		phone_num = copy_of(arg);
-	    else
-		usage();
-	    break;
-
-	case 'U':
-	    if ((arg = OPTARG(argc, argv)) != NULL)
-		phone_num2 = copy_of(arg);
-	    else
-		usage();
-	    break;
-
-	default:
-	    usage();
-	    break;
-	}
-    }
-/*
- * Default the report file to the stderr location
- */
-    if (report_fp == NULL)
-	report_fp = stderr;
-
-    if (to_log) {
-#ifdef ultrix
-	openlog("chat", LOG_PID);
-#else
-	openlog("chat", LOG_PID | LOG_NDELAY, LOG_LOCAL2);
-
-	if (verbose)
-	    setlogmask(LOG_UPTO(LOG_INFO));
-	else
-	    setlogmask(LOG_UPTO(LOG_WARNING));
-#endif
-    }
-
-    init();
-    
-    if (chat_file != NULL) {
-	arg = ARG(argc, argv);
-	if (arg != NULL)
-	    usage();
-	else
-	    do_file (chat_file);
-    } else {
-	while ((arg = ARG(argc, argv)) != NULL) {
-	    chat_expect(arg);
-
-	    if ((arg = ARG(argc, argv)) != NULL)
-		chat_send(arg);
-	}
-    }
-
-    terminate(0);
-    return 0;
-}
-
-/*
- *  Process a chat script when read from a file.
- */
-
-void do_file (chat_file)
-char *chat_file;
-{
-    int linect, sendflg;
-    char *sp, *arg, quote;
-    char buf [STR_LEN];
-    FILE *cfp;
-
-    cfp = fopen (chat_file, "r");
-    if (cfp == NULL)
-	fatal(1, "%s -- open failed: %m", chat_file);
-
-    linect = 0;
-    sendflg = 0;
-
-    while (fgets(buf, STR_LEN, cfp) != NULL) {
-	sp = strchr (buf, '\n');
-	if (sp)
-	    *sp = '\0';
-
-	linect++;
-	sp = buf;
-
-        /* lines starting with '#' are comments. If a real '#'
-           is to be expected, it should be quoted .... */
-        if ( *sp == '#' )
-	    continue;
-
-	while (*sp != '\0') {
-	    if (*sp == ' ' || *sp == '\t') {
-		++sp;
-		continue;
-	    }
-
-	    if (*sp == '"' || *sp == '\'') {
-		quote = *sp++;
-		arg = sp;
-		while (*sp != quote) {
-		    if (*sp == '\0')
-			fatal(1, "unterminated quote (line %d)", linect);
-
-		    if (*sp++ == '\\') {
-			if (*sp != '\0')
-			    ++sp;
-		    }
-		}
-	    }
-	    else {
-		arg = sp;
-		while (*sp != '\0' && *sp != ' ' && *sp != '\t')
-		    ++sp;
-	    }
-
-	    if (*sp != '\0')
-		*sp++ = '\0';
-
-	    if (sendflg)
-		chat_send (arg);
-	    else
-		chat_expect (arg);
-	    sendflg = !sendflg;
-	}
-    }
-    fclose (cfp);
-}
-
-/*
- *	We got an error parsing the command line.
- */
-void usage()
-{
-    fprintf(stderr, "\
-Usage: %s [-e] [-E] [-v] [-V] [-t timeout] [-r report-file]\n\
-     [-T phone-number] [-U phone-number2] {-f chat-file | chat-script}\n", program_name);
-    exit(1);
-}
-
-char line[1024];
-
-/*
- * Send a message to syslog and/or stderr.
- */
-void logf __V((const char *fmt, ...))
-{
-    va_list args;
-
-#ifdef __STDC__
-    va_start(args, fmt);
-#else
-    char *fmt;
-    va_start(args);
-    fmt = va_arg(args, char *);
-#endif
-
-    vfmtmsg(line, sizeof(line), fmt, args);
-    if (to_log)
-	syslog(LOG_INFO, "%s", line);
-    if (to_stderr)
-	fprintf(stderr, "%s\n", line);
-}
-
-/*
- *	Print an error message and terminate.
- */
-
-void fatal __V((int code, const char *fmt, ...))
-{
-    va_list args;
-
-#ifdef __STDC__
-    va_start(args, fmt);
-#else
-    int code;
-    char *fmt;
-    va_start(args);
-    code = va_arg(args, int);
-    fmt = va_arg(args, char *);
-#endif
-
-    vfmtmsg(line, sizeof(line), fmt, args);
-    if (to_log)
-	syslog(LOG_ERR, "%s", line);
-    if (to_stderr)
-	fprintf(stderr, "%s\n", line);
-    terminate(code);
-}
-
-int alarmed = 0;
-
-SIGTYPE sigalrm(signo)
-int signo;
-{
-    int flags;
-
-    alarm(1);
-    alarmed = 1;		/* Reset alarm to avoid race window */
-    signal(SIGALRM, sigalrm);	/* that can cause hanging in read() */
-
-    if ((flags = fcntl(0, F_GETFL, 0)) == -1)
-	fatal(2, "Can't get file mode flags on stdin: %m");
-
-    if (fcntl(0, F_SETFL, flags | O_NONBLOCK) == -1)
-	fatal(2, "Can't set file mode flags on stdin: %m");
-
-    if (verbose)
-	logf("alarm");
-}
-
-void unalarm()
-{
-    int flags;
-
-    if ((flags = fcntl(0, F_GETFL, 0)) == -1)
-	fatal(2, "Can't get file mode flags on stdin: %m");
-
-    if (fcntl(0, F_SETFL, flags & ~O_NONBLOCK) == -1)
-	fatal(2, "Can't set file mode flags on stdin: %m");
-}
-
-SIGTYPE sigint(signo)
-int signo;
-{
-    fatal(2, "SIGINT");
-}
-
-SIGTYPE sigterm(signo)
-int signo;
-{
-    fatal(2, "SIGTERM");
-}
-
-SIGTYPE sighup(signo)
-int signo;
-{
-    fatal(2, "SIGHUP");
-}
-
-void init()
-{
-    signal(SIGINT, sigint);
-    signal(SIGTERM, sigterm);
-    signal(SIGHUP, sighup);
-
-    set_tty_parameters();
-    signal(SIGALRM, sigalrm);
-    alarm(0);
-    alarmed = 0;
-}
-
-void set_tty_parameters()
-{
-#if defined(get_term_param)
-    term_parms t;
-
-    if (get_term_param (&t) < 0)
-	fatal(2, "Can't get terminal parameters: %m");
-
-    saved_tty_parameters = t;
-    have_tty_parameters  = 1;
-
-    t.c_iflag     |= IGNBRK | ISTRIP | IGNPAR;
-    t.c_oflag      = 0;
-    t.c_lflag      = 0;
-    t.c_cc[VERASE] =
-    t.c_cc[VKILL]  = 0;
-    t.c_cc[VMIN]   = 1;
-    t.c_cc[VTIME]  = 0;
-
-    if (set_term_param (&t) < 0)
-	fatal(2, "Can't set terminal parameters: %m");
-#endif
-}
-
-void break_sequence()
-{
-#ifdef TERMIOS
-    tcsendbreak (0, 0);
-#endif
-}
-
-void terminate(status)
-int status;
-{
-    static int terminating = 0;
-
-    if (terminating)
-	exit(status);
-    terminating = 1;
-    echo_stderr(-1);
-/*
- * Allow the last of the report string to be gathered before we terminate.
- */
-    if (report_gathering) {
-	int c, rep_len;
-
-	rep_len = strlen(report_buffer);
-	while (rep_len + 1 <= sizeof(report_buffer)) {
-	    alarm(1);
-	    c = get_char();
-	    alarm(0);
-	    if (c < 0 || iscntrl(c))
-		break;
-	    report_buffer[rep_len] = c;
-	    ++rep_len;
-	}
-	report_buffer[rep_len] = 0;
-	fprintf (report_fp, "chat:  %s\n", report_buffer);
-    }
-    if (report_file != (char *) 0 && report_fp != (FILE *) NULL) {
-	if (verbose)
-	    fprintf (report_fp, "Closing \"%s\".\n", report_file);
-	fclose (report_fp);
-	report_fp = (FILE *) NULL;
-    }
-
-#if defined(get_term_param)
-    if (have_tty_parameters) {
-	if (set_term_param (&saved_tty_parameters) < 0)
-	    fatal(2, "Can't restore terminal parameters: %m");
-    }
-#endif
-
-    exit(status);
-}
-
-/*
- *	'Clean up' this string.
- */
-char *clean(s, sending)
-register char *s;
-int sending;  /* set to 1 when sending (putting) this string. */
-{
-    char temp[STR_LEN], env_str[STR_LEN], cur_chr;
-    register char *s1, *phchar;
-    int add_return = sending;
-#define isoctal(chr)	(((chr) >= '0') && ((chr) <= '7'))
-#define isalnumx(chr)	((((chr) >= '0') && ((chr) <= '9')) \
-			 || (((chr) >= 'a') && ((chr) <= 'z')) \
-			 || (((chr) >= 'A') && ((chr) <= 'Z')) \
-			 || (chr) == '_')
-
-    s1 = temp;
-    while (*s) {
-	cur_chr = *s++;
-	if (cur_chr == '^') {
-	    cur_chr = *s++;
-	    if (cur_chr == '\0') {
-		*s1++ = '^';
-		break;
-	    }
-	    cur_chr &= 0x1F;
-	    if (cur_chr != 0) {
-		*s1++ = cur_chr;
-	    }
-	    continue;
-	}
-	
-	if (use_env && cur_chr == '$') {		/* ARI */
-	    phchar = env_str;
-	    while (isalnumx(*s))
-		*phchar++ = *s++;
-	    *phchar = '\0';
-	    phchar = getenv(env_str);
-	    if (phchar)
-		while (*phchar)
-		    *s1++ = *phchar++;
-	    continue;
-	}
-
-	if (cur_chr != '\\') {
-	    *s1++ = cur_chr;
-	    continue;
-	}
-
-	cur_chr = *s++;
-	if (cur_chr == '\0') {
-	    if (sending) {
-		*s1++ = '\\';
-		*s1++ = '\\';
-	    }
-	    break;
-	}
-
-	switch (cur_chr) {
-	case 'b':
-	    *s1++ = '\b';
-	    break;
-
-	case 'c':
-	    if (sending && *s == '\0')
-		add_return = 0;
-	    else
-		*s1++ = cur_chr;
-	    break;
-
-	case '\\':
-	case 'K':
-	case 'p':
-	case 'd':
-	    if (sending)
-		*s1++ = '\\';
-	    *s1++ = cur_chr;
-	    break;
-
-	case 'T':
-	    if (sending && phone_num) {
-		for (phchar = phone_num; *phchar != '\0'; phchar++) 
-		    *s1++ = *phchar;
-	    }
-	    else {
-		*s1++ = '\\';
-		*s1++ = 'T';
-	    }
-	    break;
-
-	case 'U':
-	    if (sending && phone_num2) {
-		for (phchar = phone_num2; *phchar != '\0'; phchar++) 
-		    *s1++ = *phchar;
-	    }
-	    else {
-		*s1++ = '\\';
-		*s1++ = 'U';
-	    }
-	    break;
-
-	case 'q':
-	    quiet = 1;
-	    break;
-
-	case 'r':
-	    *s1++ = '\r';
-	    break;
-
-	case 'n':
-	    *s1++ = '\n';
-	    break;
-
-	case 's':
-	    *s1++ = ' ';
-	    break;
-
-	case 't':
-	    *s1++ = '\t';
-	    break;
-
-	case 'N':
-	    if (sending) {
-		*s1++ = '\\';
-		*s1++ = '\0';
-	    }
-	    else
-		*s1++ = 'N';
-	    break;
-	    
-	case '$':			/* ARI */
-	    if (use_env) {
-		*s1++ = cur_chr;
-		break;
-	    }
-	    /* FALL THROUGH */
-
-	default:
-	    if (isoctal (cur_chr)) {
-		cur_chr &= 0x07;
-		if (isoctal (*s)) {
-		    cur_chr <<= 3;
-		    cur_chr |= *s++ - '0';
-		    if (isoctal (*s)) {
-			cur_chr <<= 3;
-			cur_chr |= *s++ - '0';
-		    }
-		}
-
-		if (cur_chr != 0 || sending) {
-		    if (sending && (cur_chr == '\\' || cur_chr == 0))
-			*s1++ = '\\';
-		    *s1++ = cur_chr;
-		}
-		break;
-	    }
-
-	    if (sending)
-		*s1++ = '\\';
-	    *s1++ = cur_chr;
-	    break;
-	}
-    }
-
-    if (add_return)
-	*s1++ = '\r';
-
-    *s1++ = '\0'; /* guarantee closure */
-    *s1++ = '\0'; /* terminate the string */
-    return dup_mem (temp, (size_t) (s1 - temp)); /* may have embedded nuls */
-}
-
-/*
- * A modified version of 'strtok'. This version skips \ sequences.
- */
-
-char *expect_strtok (s, term)
-     char *s, *term;
-{
-    static  char *str   = "";
-    int	    escape_flag = 0;
-    char   *result;
-
-/*
- * If a string was specified then do initial processing.
- */
-    if (s)
-	str = s;
-
-/*
- * If this is the escape flag then reset it and ignore the character.
- */
-    if (*str)
-	result = str;
-    else
-	result = (char *) 0;
-
-    while (*str) {
-	if (escape_flag) {
-	    escape_flag = 0;
-	    ++str;
-	    continue;
-	}
-
-	if (*str == '\\') {
-	    ++str;
-	    escape_flag = 1;
-	    continue;
-	}
-
-/*
- * If this is not in the termination string, continue.
- */
-	if (strchr (term, *str) == (char *) 0) {
-	    ++str;
-	    continue;
-	}
-
-/*
- * This is the terminator. Mark the end of the string and stop.
- */
-	*str++ = '\0';
-	break;
-    }
-    return (result);
-}
-
-/*
- * Process the expect string
- */
-
-void chat_expect (s)
-char *s;
-{
-    char *expect;
-    char *reply;
-
-    if (strcmp(s, "HANGUP") == 0) {
-	++hup_next;
-        return;
-    }
- 
-    if (strcmp(s, "ABORT") == 0) {
-	++abort_next;
-	return;
-    }
-
-    if (strcmp(s, "CLR_ABORT") == 0) {
-	++clear_abort_next;
-	return;
-    }
-
-    if (strcmp(s, "REPORT") == 0) {
-	++report_next;
-	return;
-    }
-
-    if (strcmp(s, "CLR_REPORT") == 0) {
-	++clear_report_next;
-	return;
-    }
-
-    if (strcmp(s, "TIMEOUT") == 0) {
-	++timeout_next;
-	return;
-    }
-
-    if (strcmp(s, "ECHO") == 0) {
-	++echo_next;
-	return;
-    }
-
-    if (strcmp(s, "SAY") == 0) {
-	++say_next;
-	return;
-    }
-
-/*
- * Fetch the expect and reply string.
- */
-    for (;;) {
-	expect = expect_strtok (s, "-");
-	s      = (char *) 0;
-
-	if (expect == (char *) 0)
-	    return;
-
-	reply = expect_strtok (s, "-");
-
-/*
- * Handle the expect string. If successful then exit.
- */
-	if (get_string (expect))
-	    return;
-
-/*
- * If there is a sub-reply string then send it. Otherwise any condition
- * is terminal.
- */
-	if (reply == (char *) 0 || exit_code != 3)
-	    break;
-
-	chat_send (reply);
-    }
-
-/*
- * The expectation did not occur. This is terminal.
- */
-    if (fail_reason)
-	logf("Failed (%s)", fail_reason);
-    else
-	logf("Failed");
-    terminate(exit_code);
-}
-
-/*
- * Translate the input character to the appropriate string for printing
- * the data.
- */
-
-char *character(c)
-int c;
-{
-    static char string[10];
-    char *meta;
-
-    meta = (c & 0x80) ? "M-" : "";
-    c &= 0x7F;
-
-    if (c < 32)
-	sprintf(string, "%s^%c", meta, (int)c + '@');
-    else if (c == 127)
-	sprintf(string, "%s^?", meta);
-    else
-	sprintf(string, "%s%c", meta, c);
-
-    return (string);
-}
-
-/*
- *  process the reply string
- */
-void chat_send (s)
-register char *s;
-{
-    char file_data[STR_LEN];
-
-    if (say_next) {
-	say_next = 0;
-	s = clean(s, 1);
-	write(2, s, strlen(s));
-        free(s);
-	return;
-    }
-
-    if (hup_next) {
-        hup_next = 0;
-	if (strcmp(s, "OFF") == 0)
-           signal(SIGHUP, SIG_IGN);
-        else
-           signal(SIGHUP, sighup);
-        return;
-    }
-
-    if (echo_next) {
-	echo_next = 0;
-	echo = (strcmp(s, "ON") == 0);
-	return;
-    }
-
-    if (abort_next) {
-	char *s1;
-	
-	abort_next = 0;
-	
-	if (n_aborts >= MAX_ABORTS)
-	    fatal(2, "Too many ABORT strings");
-	
-	s1 = clean(s, 0);
-	
-	if (strlen(s1) > strlen(s)
-	    || strlen(s1) + 1 > sizeof(fail_buffer))
-	    fatal(1, "Illegal or too-long ABORT string ('%v')", s);
-
-	abort_string[n_aborts++] = s1;
-
-	if (verbose)
-	    logf("abort on (%v)", s);
-	return;
-    }
-
-    if (clear_abort_next) {
-	char *s1;
-	int   i;
-        int   old_max;
-	int   pack = 0;
-	
-	clear_abort_next = 0;
-	
-	s1 = clean(s, 0);
-	
-	if (strlen(s1) > strlen(s)
-	    || strlen(s1) + 1 > sizeof(fail_buffer))
-	    fatal(1, "Illegal or too-long CLR_ABORT string ('%v')", s);
-
-        old_max = n_aborts;
-	for (i=0; i < n_aborts; i++) {
-	    if ( strcmp(s1,abort_string[i]) == 0 ) {
-		free(abort_string[i]);
-		abort_string[i] = NULL;
-		pack++;
-		n_aborts--;
-		if (verbose)
-		    logf("clear abort on (%v)", s);
-	    }
-	}
-        free(s1);
-	if (pack)
-	    pack_array(abort_string,old_max);
-	return;
-    }
-
-    if (report_next) {
-	char *s1;
-	
-	report_next = 0;
-	if (n_reports >= MAX_REPORTS)
-	    fatal(2, "Too many REPORT strings");
-	
-	s1 = clean(s, 0);
-	
-	if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1)
-	    fatal(1, "Illegal or too-long REPORT string ('%v')", s);
-	
-	report_string[n_reports++] = s1;
-	
-	if (verbose)
-	    logf("report (%v)", s);
-	return;
-    }
-
-    if (clear_report_next) {
-	char *s1;
-	int   i;
-	int   old_max;
-	int   pack = 0;
-	
-	clear_report_next = 0;
-	
-	s1 = clean(s, 0);
-	
-	if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1)
-	    fatal(1, "Illegal or too-long REPORT string ('%v')", s);
-
-	old_max = n_reports;
-	for (i=0; i < n_reports; i++) {
-	    if ( strcmp(s1,report_string[i]) == 0 ) {
-		free(report_string[i]);
-		report_string[i] = NULL;
-		pack++;
-		n_reports--;
-		if (verbose)
-		    logf("clear report (%v)", s);
-	    }
-	}
-        free(s1);
-        if (pack)
-	    pack_array(report_string,old_max);
-	
-	return;
-    }
-
-    if (timeout_next) {
-	timeout_next = 0;
-	timeout = atoi(s);
-	
-	if (timeout <= 0)
-	    timeout = DEFAULT_CHAT_TIMEOUT;
-
-	if (verbose)
-	    logf("timeout set to %d seconds", timeout);
-
-	return;
-    }
-
-    /*
-     * The syntax @filename means read the string to send from the
-     * file `filename'.
-     */
-    if (s[0] == '@') {
-	/* skip the @ and any following white-space */
-	char *fn = s;
-	while (*++fn == ' ' || *fn == '\t')
-	    ;
-
-	if (*fn != 0) {
-	    FILE *f;
-	    int n = 0;
-
-	    /* open the file and read until STR_LEN-1 bytes or end-of-file */
-	    f = fopen(fn, "r");
-	    if (f == NULL)
-		fatal(1, "%s -- open failed: %m", fn);
-	    while (n < STR_LEN - 1) {
-		int nr = fread(&file_data[n], 1, STR_LEN - 1 - n, f);
-		if (nr < 0)
-		    fatal(1, "%s -- read error", fn);
-		if (nr == 0)
-		    break;
-		n += nr;
-	    }
-	    fclose(f);
-
-	    /* use the string we got as the string to send,
-	       but trim off the final newline if any. */
-	    if (n > 0 && file_data[n-1] == '\n')
-		--n;
-	    file_data[n] = 0;
-	    s = file_data;
-	}
-    }
-
-    if (strcmp(s, "EOT") == 0)
-	s = "^D\\c";
-    else if (strcmp(s, "BREAK") == 0)
-	s = "\\K\\c";
-
-    if (!put_string(s))
-	fatal(1, "Failed");
-}
-
-int get_char()
-{
-    int status;
-    char c;
-
-    status = read(0, &c, 1);
-
-    switch (status) {
-    case 1:
-	return ((int)c & 0x7F);
-
-    default:
-	logf("warning: read() on stdin returned %d", status);
-
-    case -1:
-	if ((status = fcntl(0, F_GETFL, 0)) == -1)
-	    fatal(2, "Can't get file mode flags on stdin: %m");
-
-	if (fcntl(0, F_SETFL, status & ~O_NONBLOCK) == -1)
-	    fatal(2, "Can't set file mode flags on stdin: %m");
-	
-	return (-1);
-    }
-}
-
-int put_char(c)
-int c;
-{
-    int status;
-    char ch = c;
-
-    usleep(10000);		/* inter-character typing delay (?) */
-
-    status = write(1, &ch, 1);
-
-    switch (status) {
-    case 1:
-	return (0);
-	
-    default:
-	logf("warning: write() on stdout returned %d", status);
-	
-    case -1:
-	if ((status = fcntl(0, F_GETFL, 0)) == -1)
-	    fatal(2, "Can't get file mode flags on stdin, %m");
-
-	if (fcntl(0, F_SETFL, status & ~O_NONBLOCK) == -1)
-	    fatal(2, "Can't set file mode flags on stdin: %m");
-	
-	return (-1);
-    }
-}
-
-int write_char (c)
-int c;
-{
-    if (alarmed || put_char(c) < 0) {
-	alarm(0);
-	alarmed = 0;
-
-	if (verbose) {
-	    if (errno == EINTR || errno == EWOULDBLOCK)
-		logf(" -- write timed out");
-	    else
-		logf(" -- write failed: %m");
-	}
-	return (0);
-    }
-    return (1);
-}
-
-int put_string (s)
-register char *s;
-{
-    quiet = 0;
-    s = clean(s, 1);
-
-    if (verbose) {
-	if (quiet)
-	    logf("send (??????)");
-	else
-	    logf("send (%v)", s);
-    }
-
-    alarm(timeout); alarmed = 0;
-
-    while (*s) {
-	register char c = *s++;
-
-	if (c != '\\') {
-	    if (!write_char (c))
-		return 0;
-	    continue;
-	}
-
-	c = *s++;
-	switch (c) {
-	case 'd':
-	    sleep(1);
-	    break;
-
-	case 'K':
-	    break_sequence();
-	    break;
-
-	case 'p':
-	    usleep(10000); 	/* 1/100th of a second (arg is microseconds) */
-	    break;
-
-	default:
-	    if (!write_char (c))
-		return 0;
-	    break;
-	}
-    }
-
-    alarm(0);
-    alarmed = 0;
-    return (1);
-}
-
-/*
- *	Echo a character to stderr.
- *	When called with -1, a '\n' character is generated when
- *	the cursor is not at the beginning of a line.
- */
-void echo_stderr(n)
-int n;
-{
-    static int need_lf;
-    char *s;
-
-    switch (n) {
-    case '\r':		/* ignore '\r' */
-	break;
-    case -1:
-	if (need_lf == 0)
-	    break;
-	/* fall through */
-    case '\n':
-	write(2, "\n", 1);
-	need_lf = 0;
-	break;
-    default:
-	s = character(n);
-	write(2, s, strlen(s));
-	need_lf = 1;
-	break;
-    }
-}
-
-/*
- *	'Wait for' this string to appear on this file descriptor.
- */
-int get_string(string)
-register char *string;
-{
-    char temp[STR_LEN];
-    int c, printed = 0, len, minlen;
-    register char *s = temp, *end = s + STR_LEN;
-    char *logged = temp;
-
-    fail_reason = (char *)0;
-    string = clean(string, 0);
-    len = strlen(string);
-    minlen = (len > sizeof(fail_buffer)? len: sizeof(fail_buffer)) - 1;
-
-    if (verbose)
-	logf("expect (%v)", string);
-
-    if (len > STR_LEN) {
-	logf("expect string is too long");
-	exit_code = 1;
-	return 0;
-    }
-
-    if (len == 0) {
-	if (verbose)
-	    logf("got it");
-	return (1);
-    }
-
-    alarm(timeout);
-    alarmed = 0;
-
-    while ( ! alarmed && (c = get_char()) >= 0) {
-	int n, abort_len, report_len;
-
-	if (echo)
-	    echo_stderr(c);
-	if (verbose && c == '\n') {
-	    if (s == logged)
-		logf("");	/* blank line */
-	    else
-		logf("%0.*v", s - logged, logged);
-	    logged = s + 1;
-	}
-
-	*s++ = c;
-
-	if (verbose && s >= logged + 80) {
-	    logf("%0.*v", s - logged, logged);
-	    logged = s;
-	}
-
-	if (Verbose) {
-	   if (c == '\n')
-	       fputc( '\n', stderr );
-	   else if (c != '\r')
-	       fprintf( stderr, "%s", character(c) );
-	}
-
-	if (!report_gathering) {
-	    for (n = 0; n < n_reports; ++n) {
-		if ((report_string[n] != (char*) NULL) &&
-		    s - temp >= (report_len = strlen(report_string[n])) &&
-		    strncmp(s - report_len, report_string[n], report_len) == 0) {
-		    time_t time_now   = time ((time_t*) NULL);
-		    struct tm* tm_now = localtime (&time_now);
-
-		    strftime (report_buffer, 20, "%b %d %H:%M:%S ", tm_now);
-		    strcat (report_buffer, report_string[n]);
-
-		    report_string[n] = (char *) NULL;
-		    report_gathering = 1;
-		    break;
-		}
-	    }
-	}
-	else {
-	    if (!iscntrl (c)) {
-		int rep_len = strlen (report_buffer);
-		report_buffer[rep_len]     = c;
-		report_buffer[rep_len + 1] = '\0';
-	    }
-	    else {
-		report_gathering = 0;
-		fprintf (report_fp, "chat:  %s\n", report_buffer);
-	    }
-	}
-
-	if (s - temp >= len &&
-	    c == string[len - 1] &&
-	    strncmp(s - len, string, len) == 0) {
-	    if (verbose) {
-		if (s > logged)
-		    logf("%0.*v", s - logged, logged);
-		logf(" -- got it\n");
-	    }
-
-	    alarm(0);
-	    alarmed = 0;
-	    return (1);
-	}
-
-	for (n = 0; n < n_aborts; ++n) {
-	    if (s - temp >= (abort_len = strlen(abort_string[n])) &&
-		strncmp(s - abort_len, abort_string[n], abort_len) == 0) {
-		if (verbose) {
-		    if (s > logged)
-			logf("%0.*v", s - logged, logged);
-		    logf(" -- failed");
-		}
-
-		alarm(0);
-		alarmed = 0;
-		exit_code = n + 4;
-		strcpy(fail_reason = fail_buffer, abort_string[n]);
-		return (0);
-	    }
-	}
-
-	if (s >= end) {
-	    if (logged < s - minlen) {
-		if (verbose)
-		    logf("%0.*v", s - logged, logged);
-		logged = s;
-	    }
-	    s -= minlen;
-	    memmove(temp, s, minlen);
-	    logged = temp + (logged - s);
-	    s = temp + minlen;
-	}
-
-	if (alarmed && verbose)
-	    logf("warning: alarm synchronization problem");
-    }
-
-    alarm(0);
-    
-    if (verbose && printed) {
-	if (alarmed)
-	    logf(" -- read timed out");
-	else
-	    logf(" -- read failed: %m");
-    }
-
-    exit_code = 3;
-    alarmed   = 0;
-    return (0);
-}
-
-/*
- * Gross kludge to handle Solaris versions >= 2.6 having usleep.
- */
-#ifdef SOL2
-#include <sys/param.h>
-#if MAXUID > 65536		/* then this is Solaris 2.6 or later */
-#undef NO_USLEEP
-#endif
-#endif /* SOL2 */
-
-#ifdef NO_USLEEP
-#include <sys/types.h>
-#include <sys/time.h>
-
-/*
-  usleep -- support routine for 4.2BSD system call emulations
-  last edit:  29-Oct-1984     D A Gwyn
-  */
-
-extern int	  select();
-
-int
-usleep( usec )				  /* returns 0 if ok, else -1 */
-    long		usec;		/* delay in microseconds */
-{
-    static struct {		/* `timeval' */
-	long	tv_sec;		/* seconds */
-	long	tv_usec;	/* microsecs */
-    } delay;	    		/* _select() timeout */
-
-    delay.tv_sec  = usec / 1000000L;
-    delay.tv_usec = usec % 1000000L;
-
-    return select(0, (long *)0, (long *)0, (long *)0, &delay);
-}
-#endif
-
-void
-pack_array (array, end)
-    char **array; /* The address of the array of string pointers */
-    int    end;   /* The index of the next free entry before CLR_ */
-{
-    int i, j;
-
-    for (i = 0; i < end; i++) {
-	if (array[i] == NULL) {
-	    for (j = i+1; j < end; ++j)
-		if (array[j] != NULL)
-		    array[i++] = array[j];
-	    for (; i < end; ++i)
-		array[i] = NULL;
-	    break;
-	}
-    }
-}
-
-/*
- * vfmtmsg - format a message into a buffer.  Like vsprintf except we
- * also specify the length of the output buffer, and we handle the
- * %m (error message) format.
- * Doesn't do floating-point formats.
- * Returns the number of chars put into buf.
- */
-#define OUTCHAR(c)	(buflen > 0? (--buflen, *buf++ = (c)): 0)
-
-int
-vfmtmsg(buf, buflen, fmt, args)
-    char *buf;
-    int buflen;
-    const char *fmt;
-    va_list args;
-{
-    int c, i, n;
-    int width, prec, fillch;
-    int base, len, neg, quoted;
-    unsigned long val = 0;
-    char *str, *buf0;
-    const char *f;
-    unsigned char *p;
-    char num[32];
-    static char hexchars[] = "0123456789abcdef";
-
-    buf0 = buf;
-    --buflen;
-    while (buflen > 0) {
-	for (f = fmt; *f != '%' && *f != 0; ++f)
-	    ;
-	if (f > fmt) {
-	    len = f - fmt;
-	    if (len > buflen)
-		len = buflen;
-	    memcpy(buf, fmt, len);
-	    buf += len;
-	    buflen -= len;
-	    fmt = f;
-	}
-	if (*fmt == 0)
-	    break;
-	c = *++fmt;
-	width = prec = 0;
-	fillch = ' ';
-	if (c == '0') {
-	    fillch = '0';
-	    c = *++fmt;
-	}
-	if (c == '*') {
-	    width = va_arg(args, int);
-	    c = *++fmt;
-	} else {
-	    while (isdigit(c)) {
-		width = width * 10 + c - '0';
-		c = *++fmt;
-	    }
-	}
-	if (c == '.') {
-	    c = *++fmt;
-	    if (c == '*') {
-		prec = va_arg(args, int);
-		c = *++fmt;
-	    } else {
-		while (isdigit(c)) {
-		    prec = prec * 10 + c - '0';
-		    c = *++fmt;
-		}
-	    }
-	}
-	str = 0;
-	base = 0;
-	neg = 0;
-	++fmt;
-	switch (c) {
-	case 'd':
-	    i = va_arg(args, int);
-	    if (i < 0) {
-		neg = 1;
-		val = -i;
-	    } else
-		val = i;
-	    base = 10;
-	    break;
-	case 'o':
-	    val = va_arg(args, unsigned int);
-	    base = 8;
-	    break;
-	case 'x':
-	    val = va_arg(args, unsigned int);
-	    base = 16;
-	    break;
-	case 'p':
-	    val = (unsigned long) va_arg(args, void *);
-	    base = 16;
-	    neg = 2;
-	    break;
-	case 's':
-	    str = va_arg(args, char *);
-	    break;
-	case 'c':
-	    num[0] = va_arg(args, int);
-	    num[1] = 0;
-	    str = num;
-	    break;
-	case 'm':
-	    str = strerror(errno);
-	    break;
-	case 'v':		/* "visible" string */
-	case 'q':		/* quoted string */
-	    quoted = c == 'q';
-	    p = va_arg(args, unsigned char *);
-	    if (fillch == '0' && prec > 0) {
-		n = prec;
-	    } else {
-		n = strlen((char *)p);
-		if (prec > 0 && prec < n)
-		    n = prec;
-	    }
-	    while (n > 0 && buflen > 0) {
-		c = *p++;
-		--n;
-		if (!quoted && c >= 0x80) {
-		    OUTCHAR('M');
-		    OUTCHAR('-');
-		    c -= 0x80;
-		}
-		if (quoted && (c == '"' || c == '\\'))
-		    OUTCHAR('\\');
-		if (c < 0x20 || (0x7f <= c && c < 0xa0)) {
-		    if (quoted) {
-			OUTCHAR('\\');
-			switch (c) {
-			case '\t':	OUTCHAR('t');	break;
-			case '\n':	OUTCHAR('n');	break;
-			case '\b':	OUTCHAR('b');	break;
-			case '\f':	OUTCHAR('f');	break;
-			default:
-			    OUTCHAR('x');
-			    OUTCHAR(hexchars[c >> 4]);
-			    OUTCHAR(hexchars[c & 0xf]);
-			}
-		    } else {
-			if (c == '\t')
-			    OUTCHAR(c);
-			else {
-			    OUTCHAR('^');
-			    OUTCHAR(c ^ 0x40);
-			}
-		    }
-		} else
-		    OUTCHAR(c);
-	    }
-	    continue;
-	default:
-	    *buf++ = '%';
-	    if (c != '%')
-		--fmt;		/* so %z outputs %z etc. */
-	    --buflen;
-	    continue;
-	}
-	if (base != 0) {
-	    str = num + sizeof(num);
-	    *--str = 0;
-	    while (str > num + neg) {
-		*--str = hexchars[val % base];
-		val = val / base;
-		if (--prec <= 0 && val == 0)
-		    break;
-	    }
-	    switch (neg) {
-	    case 1:
-		*--str = '-';
-		break;
-	    case 2:
-		*--str = 'x';
-		*--str = '0';
-		break;
-	    }
-	    len = num + sizeof(num) - 1 - str;
-	} else {
-	    len = strlen(str);
-	    if (prec > 0 && len > prec)
-		len = prec;
-	}
-	if (width > 0) {
-	    if (width > buflen)
-		width = buflen;
-	    if ((n = width - len) > 0) {
-		buflen -= n;
-		for (; n > 0; --n)
-		    *buf++ = fillch;
-	    }
-	}
-	if (len > buflen)
-	    len = buflen;
-	memcpy(buf, str, len);
-	buf += len;
-	buflen -= len;
-    }
-    *buf = 0;
-    return buf - buf0;
-}
diff --git a/mdk-stage1/ppp/common/zlib.c b/mdk-stage1/ppp/common/zlib.c
deleted file mode 100644
index 503076886..000000000
--- a/mdk-stage1/ppp/common/zlib.c
+++ /dev/null
@@ -1,5376 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.  See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp and deflateOutputPending
- * - allow strm->next_out to be NULL, meaning discard the output
- *
- * $Id$
- */
-
-/* 
- *  ==FILEVERSION 971210==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-#define NO_DUMMY_DECL
-#define NO_ZCFUNCS
-#define MY_ZCALLOC
-
-#if defined(__FreeBSD__) && (defined(KERNEL) || defined(_KERNEL))
-#define inflate	inflate_ppp	/* FreeBSD already has an inflate :-( */
-#endif
-
-
-/* +++ zutil.h */
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.16 1996/07/24 13:41:13 me Exp $ */
-
-#ifndef _Z_UTIL_H
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#if defined(KERNEL) || defined(_KERNEL)
-/* Assume this is a *BSD or SVR4 kernel */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/systm.h>
-#undef u
-#  define HAVE_MEMCPY
-#  define memcpy(d, s, n)	bcopy((s), (d), (n))
-#  define memset(d, v, n)	bzero((d), (n))
-#  define memcmp		bcmp
-
-#else
-#if defined(__KERNEL__)
-/* Assume this is a Linux kernel */
-#include <linux/string.h>
-#define HAVE_MEMCPY
-
-#else /* not kernel */
-
-#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS)
-#   include <stddef.h>
-#   include <errno.h>
-#else
-    extern int errno;
-#endif
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-#endif /* __KERNEL__ */
-#endif /* _KERNEL || KERNEL */
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
-/* (size given to avoid silly warnings with Visual C++) */
-
-#define ERR_MSG(err) z_errmsg[Z_NEED_DICT-(err)]
-
-#define ERR_RETURN(strm,err) \
-  return (strm->msg = (char*)ERR_MSG(err), (err))
-/* To be used only when the state is known to be valid */
-
-        /* common constants */
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-#define PRESET_DICT 0x20 /* preset dictionary flag in zlib header */
-
-        /* target dependencies */
-
-#ifdef MSDOS
-#  define OS_CODE  0x00
-#  ifdef __TURBOC__
-#    include <alloc.h>
-#  else /* MSC or DJGPP */
-#    include <malloc.h>
-#  endif
-#endif
-
-#ifdef OS2
-#  define OS_CODE  0x06
-#endif
-
-#ifdef WIN32 /* Window 95 & Windows NT */
-#  define OS_CODE  0x0b
-#endif
-
-#if defined(VAXC) || defined(VMS)
-#  define OS_CODE  0x02
-#  define FOPEN(name, mode) \
-     fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
-#endif
-
-#ifdef AMIGA
-#  define OS_CODE  0x01
-#endif
-
-#if defined(ATARI) || defined(atarist)
-#  define OS_CODE  0x05
-#endif
-
-#ifdef MACOS
-#  define OS_CODE  0x07
-#endif
-
-#ifdef __50SERIES /* Prime/PRIMOS */
-#  define OS_CODE  0x0F
-#endif
-
-#ifdef TOPS20
-#  define OS_CODE  0x0a
-#endif
-
-#if defined(_BEOS_) || defined(RISCOS)
-#  define fdopen(fd,mode) NULL /* No fdopen() */
-#endif
-
-        /* Common defaults */
-
-#ifndef OS_CODE
-#  define OS_CODE  0x03  /* assume Unix */
-#endif
-
-#ifndef FOPEN
-#  define FOPEN(name, mode) fopen((name), (mode))
-#endif
-
-         /* functions */
-
-#ifdef HAVE_STRERROR
-   extern char *strerror OF((int));
-#  define zstrerror(errnum) strerror(errnum)
-#else
-#  define zstrerror(errnum) ""
-#endif
-
-#if defined(pyr)
-#  define NO_MEMCPY
-#endif
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER)
- /* Use our own functions for small and medium model with MSC <= 5.0.
-  * You may have to use the same strategy for Borland C (untested).
-  */
-#  define NO_MEMCPY
-#endif
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-#  define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-#  ifdef SMALL_MEDIUM /* MSDOS small or medium model */
-#    define zmemcpy _fmemcpy
-#    define zmemcmp _fmemcmp
-#    define zmemzero(dest, len) _fmemset(dest, 0, len)
-#  else
-#    define zmemcpy memcpy
-#    define zmemcmp memcmp
-#    define zmemzero(dest, len) memset(dest, 0, len)
-#  endif
-#else
-   extern void zmemcpy  OF((Bytef* dest, Bytef* source, uInt len));
-   extern int  zmemcmp  OF((Bytef* s1,   Bytef* s2, uInt len));
-   extern void zmemzero OF((Bytef* dest, uInt len));
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-#  include <stdio.h>
-#  ifndef verbose
-#    define verbose 0
-#  endif
-   extern void z_error    OF((char *m));
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len));
-
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void   zcfree  OF((voidpf opaque, voidpf ptr));
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
-#define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
-
-#endif /* _Z_UTIL_H */
-/* --- zutil.h */
-
-/* +++ deflate.h */
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* From: deflate.h,v 1.10 1996/07/02 12:41:00 me Exp $ */
-
-#ifndef _DEFLATE_H
-#define _DEFLATE_H
-
-/* #include "zutil.h" */
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE    42
-#define BUSY_STATE   113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct deflate_state {
-    z_streamp strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    ulg   pending_buf_size; /* size of pending_buf */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    int   pending;       /* nb of bytes in the pending buffer */
-    int   noheader;      /* suppress zlib header and adler32 */
-    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
-    Byte  method;        /* STORED (for zip only) or DEFLATED */
-    int   last_flush;    /* value of flush param for previous deflate call */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-    int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    ulg compressed_len; /* total bit length of compressed file */
-    uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
-
-#ifdef DEBUG_ZLIB
-    ulg bits_sent;      /* bit length of the compressed data */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-        /* in trees.c */
-void _tr_init         OF((deflate_state *s));
-int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
-ulg  _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
-			  int eof));
-void _tr_align        OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int eof));
-void _tr_stored_type_only OF((deflate_state *));
-
-#endif
-/* --- deflate.h */
-
-/* +++ deflate.c */
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in ftp://ds.internic.net/rfc/rfc1951.txt
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* From: deflate.c,v 1.15 1996/07/24 13:40:58 me Exp $ */
-
-/* #include "deflate.h" */
-
-char deflate_copyright[] = " deflate 1.0.4 Copyright 1995-1996 Jean-loup Gailly ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-/* ===========================================================================
- *  Function prototypes.
- */
-typedef enum {
-    need_more,      /* block not completed, need more input or more output */
-    block_done,     /* block flush performed */
-    finish_started, /* finish started, need only more output at next deflate */
-    finish_done     /* finish done, accept no more input or output */
-} block_state;
-
-typedef block_state (*compress_func) OF((deflate_state *s, int flush));
-/* Compression function. Returns the block state after the call. */
-
-local void fill_window    OF((deflate_state *s));
-local block_state deflate_stored OF((deflate_state *s, int flush));
-local block_state deflate_fast   OF((deflate_state *s, int flush));
-local block_state deflate_slow   OF((deflate_state *s, int flush));
-local void lm_init        OF((deflate_state *s));
-local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, charf *buf, unsigned size));
-#ifdef ASMV
-      void match_init OF((void)); /* asm code initialization */
-      uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#else
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
-#endif
-
-#ifdef DEBUG_ZLIB
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-/* ===========================================================================
- * Local data
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-   compress_func func;
-} config;
-
-local config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
-/* 1 */ {4,    4,  8,    4, deflate_fast}, /* maximum speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8, deflate_fast},
-/* 3 */ {4,    6, 32,   32, deflate_fast},
-
-/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32, deflate_slow},
-/* 6 */ {8,   16, 128, 128, deflate_slow},
-/* 7 */ {8,   32, 128, 256, deflate_slow},
-/* 8 */ {32, 128, 258, 1024, deflate_slow},
-/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-#ifndef NO_DUMMY_DECL
-struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
-#endif
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (Pos)(str))
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int deflateInit_(strm, level, version, stream_size)
-    z_streamp strm;
-    int level;
-    const char *version;
-    int stream_size;
-{
-    return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-			 Z_DEFAULT_STRATEGY, version, stream_size);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
-		  version, stream_size)
-    z_streamp strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    const char *version;
-    int stream_size;
-{
-    deflate_state *s;
-    int noheader = 0;
-    static char* my_version = ZLIB_VERSION;
-
-    ushf *overlay;
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 24 bits.
-     */
-
-    if (version == Z_NULL || version[0] != my_version[0] ||
-        stream_size != sizeof(z_stream)) {
-	return Z_VERSION_ERROR;
-    }
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-#ifndef NO_ZCFUNCS
-    if (strm->zalloc == Z_NULL) {
-	strm->zalloc = zcalloc;
-	strm->opaque = (voidpf)0;
-    }
-    if (strm->zfree == Z_NULL) strm->zfree = zcfree;
-#endif
-
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-
-    if (windowBits < 0) { /* undocumented feature: suppress zlib header */
-        noheader = 1;
-        windowBits = -windowBits;
-    }
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-	strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
-        return Z_STREAM_ERROR;
-    }
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-
-    s->noheader = noheader;
-    s->w_bits = windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
-    s->pending_buf = (uchf *) overlay;
-    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
-    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-
-    return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int deflateSetDictionary (strm, dictionary, dictLength)
-    z_streamp strm;
-    const Bytef *dictionary;
-    uInt  dictLength;
-{
-    deflate_state *s;
-    uInt length = dictLength;
-    uInt n;
-    IPos hash_head = 0;
-
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
-	return Z_STREAM_ERROR;
-
-    s = (deflate_state *) strm->state;
-    if (s->status != INIT_STATE) return Z_STREAM_ERROR;
-
-    strm->adler = adler32(strm->adler, dictionary, dictLength);
-
-    if (length < MIN_MATCH) return Z_OK;
-    if (length > MAX_DIST(s)) {
-	length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
-	dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
-    }
-    zmemcpy((charf *)s->window, dictionary, length);
-    s->strstart = length;
-    s->block_start = (long)length;
-
-    /* Insert all strings in the hash table (except for the last two bytes).
-     * s->lookahead stays null, so s->ins_h will be recomputed at the next
-     * call of fill_window.
-     */
-    s->ins_h = s->window[0];
-    UPDATE_HASH(s, s->ins_h, s->window[1]);
-    for (n = 0; n <= length - MIN_MATCH; n++) {
-	INSERT_STRING(s, n, hash_head);
-    }
-    if (hash_head) hash_head = 0;  /* to make compiler happy */
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateReset (strm)
-    z_streamp strm;
-{
-    deflate_state *s;
-    
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->noheader < 0) {
-        s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
-    }
-    s->status = s->noheader ? BUSY_STATE : INIT_STATE;
-    strm->adler = 1;
-    s->last_flush = Z_NO_FLUSH;
-
-    _tr_init(s);
-    lm_init(s);
-
-    return Z_OK;
-}
-
-/* ========================================================================= */
-int deflateParams(strm, level, strategy)
-    z_streamp strm;
-    int level;
-    int strategy;
-{
-    deflate_state *s;
-    compress_func func;
-    int err = Z_OK;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = (deflate_state *) strm->state;
-
-    if (level == Z_DEFAULT_COMPRESSION) {
-	level = 6;
-    }
-    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
-	return Z_STREAM_ERROR;
-    }
-    func = configuration_table[s->level].func;
-
-    if (func != configuration_table[level].func && strm->total_in != 0) {
-	/* Flush the last buffer: */
-	err = deflate(strm, Z_PARTIAL_FLUSH);
-    }
-    if (s->level != level) {
-	s->level = level;
-	s->max_lazy_match   = configuration_table[level].max_lazy;
-	s->good_match       = configuration_table[level].good_length;
-	s->nice_match       = configuration_table[level].nice_length;
-	s->max_chain_length = configuration_table[level].max_chain;
-    }
-    s->strategy = strategy;
-    return err;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}   
-
-/* =========================================================================
- * Flush as much pending output as possible. All deflate() output goes
- * through this function so some applications may wish to modify it
- * to avoid allocating a large strm->next_out buffer and copying into it.
- * (See also read_buf()).
- */
-local void flush_pending(strm)
-    z_streamp strm;
-{
-    deflate_state *s = (deflate_state *) strm->state;
-    unsigned len = s->pending;
-
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    if (strm->next_out != Z_NULL) {
-	zmemcpy(strm->next_out, s->pending_out, len);
-	strm->next_out += len;
-    }
-    s->pending_out += len;
-    strm->total_out += len;
-    strm->avail_out  -= len;
-    s->pending -= len;
-    if (s->pending == 0) {
-        s->pending_out = s->pending_buf;
-    }
-}
-
-/* ========================================================================= */
-int deflate (strm, flush)
-    z_streamp strm;
-    int flush;
-{
-    int old_flush; /* value of flush param for previous deflate call */
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-	flush > Z_FINISH || flush < 0) {
-        return Z_STREAM_ERROR;
-    }
-    s = (deflate_state *) strm->state;
-
-    if ((strm->next_in == Z_NULL && strm->avail_in != 0) ||
-	(s->status == FINISH_STATE && flush != Z_FINISH)) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    s->strm = strm; /* just in case */
-    old_flush = s->last_flush;
-    s->last_flush = flush;
-
-    /* Write the zlib header */
-    if (s->status == INIT_STATE) {
-
-        uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
-        uInt level_flags = (s->level-1) >> 1;
-
-        if (level_flags > 3) level_flags = 3;
-        header |= (level_flags << 6);
-	if (s->strstart != 0) header |= PRESET_DICT;
-        header += 31 - (header % 31);
-
-        s->status = BUSY_STATE;
-        putShortMSB(s, header);
-
-	/* Save the adler32 of the preset dictionary: */
-	if (s->strstart != 0) {
-	    putShortMSB(s, (uInt)(strm->adler >> 16));
-	    putShortMSB(s, (uInt)(strm->adler & 0xffff));
-	}
-	strm->adler = 1L;
-    }
-
-    /* Flush as much pending output as possible */
-    if (s->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) {
-	    /* Since avail_out is 0, deflate will be called again with
-	     * more output space, but possibly with both pending and
-	     * avail_in equal to zero. There won't be anything to do,
-	     * but this is not an error situation so make sure we
-	     * return OK instead of BUF_ERROR at next call of deflate:
-             */
-	    s->last_flush = -1;
-	    return Z_OK;
-	}
-
-    /* Make sure there is something to do and avoid duplicate consecutive
-     * flushes. For repeated and useless calls with Z_FINISH, we keep
-     * returning Z_STREAM_END instead of Z_BUFF_ERROR.
-     */
-    } else if (strm->avail_in == 0 && flush <= old_flush &&
-	       flush != Z_FINISH) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (s->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || s->lookahead != 0 ||
-        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
-        block_state bstate;
-
-	bstate = (*(configuration_table[s->level].func))(s, flush);
-
-        if (bstate == finish_started || bstate == finish_done) {
-            s->status = FINISH_STATE;
-        }
-        if (bstate == need_more || bstate == finish_started) {
-	    if (strm->avail_out == 0) {
-	        s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
-	    }
-	    return Z_OK;
-	    /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-	     * of deflate should use the same flush parameter to make sure
-	     * that the flush is complete. So we don't have to output an
-	     * empty block here, this will be done at next call. This also
-	     * ensures that for a very small output buffer, we emit at most
-	     * one empty block.
-	     */
-	}
-        if (bstate == block_done) {
-            if (flush == Z_PARTIAL_FLUSH) {
-                _tr_align(s);
-	    } else if (flush == Z_PACKET_FLUSH) {
-		/* Output just the 3-bit `stored' block type value,
-		   but not a zero length. */
-		_tr_stored_type_only(s);
-            } else { /* FULL_FLUSH or SYNC_FLUSH */
-                _tr_stored_block(s, (char*)0, 0L, 0);
-                /* For a full flush, this empty block will be recognized
-                 * as a special marker by inflate_sync().
-                 */
-                if (flush == Z_FULL_FLUSH) {
-                    CLEAR_HASH(s);             /* forget history */
-                }
-            }
-            flush_pending(strm);
-	    if (strm->avail_out == 0) {
-	      s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
-	      return Z_OK;
-	    }
-        }
-    }
-    Assert(strm->avail_out > 0, "bug2");
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (s->noheader) return Z_STREAM_END;
-
-    /* Write the zlib trailer (adler32) */
-    putShortMSB(s, (uInt)(strm->adler >> 16));
-    putShortMSB(s, (uInt)(strm->adler & 0xffff));
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    s->noheader = -1; /* write the trailer only once! */
-    return s->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int deflateEnd (strm)
-    z_streamp strm;
-{
-    int status;
-    deflate_state *s;
-
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    s = (deflate_state *) strm->state;
-
-    status = s->status;
-    if (status != INIT_STATE && status != BUSY_STATE &&
-	status != FINISH_STATE) {
-      return Z_STREAM_ERROR;
-    }
-
-    /* Deallocate in reverse order of allocations: */
-    TRY_FREE(strm, s->pending_buf);
-    TRY_FREE(strm, s->head);
-    TRY_FREE(strm, s->prev);
-    TRY_FREE(strm, s->window);
-
-    ZFREE(strm, s);
-    strm->state = Z_NULL;
-
-    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
-}
-
-/* =========================================================================
- * Copy the source state to the destination state.
- */
-int deflateCopy (dest, source)
-    z_streamp dest;
-    z_streamp source;
-{
-    deflate_state *ds;
-    deflate_state *ss;
-    ushf *overlay;
-
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL)
-        return Z_STREAM_ERROR;
-    ss = (deflate_state *) source->state;
-
-    zmemcpy(dest, source, sizeof(*dest));
-
-    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
-    if (ds == Z_NULL) return Z_MEM_ERROR;
-    dest->state = (struct internal_state FAR *) ds;
-    zmemcpy(ds, ss, sizeof(*ds));
-    ds->strm = dest;
-
-    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
-    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
-    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
-    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
-    ds->pending_buf = (uchf *) overlay;
-
-    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
-        ds->pending_buf == Z_NULL) {
-        deflateEnd (dest);
-        return Z_MEM_ERROR;
-    }
-    /* ??? following zmemcpy doesn't work for 16-bit MSDOS */
-    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
-    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
-    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
-    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
-
-    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
-    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
-    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
-
-    ds->l_desc.dyn_tree = ds->dyn_ltree;
-    ds->d_desc.dyn_tree = ds->dyn_dtree;
-    ds->bl_desc.dyn_tree = ds->bl_tree;
-
-    return Z_OK;
-}
-
-/* ===========================================================================
- * Return the number of bytes of output which are immediately available
- * for output from the decompressor.
- */
-int deflateOutputPending (strm)
-    z_streamp strm;
-{
-    if (strm == Z_NULL || strm->state == Z_NULL) return 0;
-    
-    return ((deflate_state *)(strm->state))->pending;
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.  All deflate() input goes through
- * this function so some applications may wish to modify it to avoid
- * allocating a large strm->next_in buffer and copying from it.
- * (See also flush_pending()).
- */
-local int read_buf(strm, buf, size)
-    z_streamp strm;
-    charf *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    if (!((deflate_state *)(strm->state))->noheader) {
-        strm->adler = adler32(strm->adler, strm->next_in, len);
-    }
-    zmemcpy(buf, strm->next_in, len);
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->match_length = s->prev_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- * OUT assertion: the match length is not greater than s->lookahead.
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local uInt longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return best_len;
-    return s->lookahead;
-}
-#endif /* ASMV */
-
-#ifdef DEBUG_ZLIB
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (zmemcmp((charf *)s->window + match,
-                (charf *)s->window + start, length) != EQUAL) {
-        fprintf(stderr, " start %u, match %u, length %d\n",
-		start, match, length);
-        do {
-	    fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
-	} while (--length != 0);
-        z_error("invalid match");
-    }
-    if (z_verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    register unsigned n, m;
-    register Posf *p;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-            more = wsize;
-
-        } else if (more == (unsigned)(-1)) {
-            /* Very unlikely, but possible on 16 bit machine if strstart == 0
-             * and lookahead == 1 (input done one byte at time)
-             */
-            more--;
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            zmemcpy((charf *)s->window, (charf *)s->window+wsize,
-                   (unsigned)wsize);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-            s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage). We slide even when level == 0
-               to keep the hash table consistent if we switch back to level > 0
-               later. (Using level 0 permanently is not an optimal usage of
-               zlib, so we don't care about this pathological case.)
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) return;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
-                     more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead >= MIN_MATCH) {
-            s->ins_h = s->window[s->strstart];
-            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, eof) { \
-   _tr_flush_block(s, (s->block_start >= 0L ? \
-                   (charf *)&s->window[(unsigned)s->block_start] : \
-                   (charf *)Z_NULL), \
-		(ulg)((long)s->strstart - s->block_start), \
-		(eof)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, eof) { \
-   FLUSH_BLOCK_ONLY(s, eof); \
-   if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
-}
-
-/* ===========================================================================
- * Copy without compression as much as possible from the input stream, return
- * the current block state.
- * This function does not insert new strings in the dictionary since
- * uncompressible data is probably not useful. This function is used
- * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying from
- * window to pending_buf.
- */
-local block_state deflate_stored(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
-     * to pending_buf_size, and each stored block has a 5 byte header:
-     */
-    ulg max_block_size = 0xffff;
-    ulg max_start;
-
-    if (max_block_size > s->pending_buf_size - 5) {
-        max_block_size = s->pending_buf_size - 5;
-    }
-
-    /* Copy as much as possible from input to output: */
-    for (;;) {
-        /* Fill the window as much as possible: */
-        if (s->lookahead <= 1) {
-
-            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
-		   s->block_start >= (long)s->w_size, "slide too late");
-
-            fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-	Assert(s->block_start >= 0L, "block gone");
-
-	s->strstart += s->lookahead;
-	s->lookahead = 0;
-
-	/* Emit a stored block if pending_buf will be full: */
- 	max_start = s->block_start + max_block_size;
-        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
-	    /* strstart == 0 is possible when wraparound on 16-bit machine */
-	    s->lookahead = (uInt)(s->strstart - max_start);
-	    s->strstart = (uInt)max_start;
-            FLUSH_BLOCK(s, 0);
-	}
-	/* Flush if we may have to slide, otherwise block_start may become
-         * negative and the data will be gone:
-         */
-        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
-            FLUSH_BLOCK(s, 0);
-	}
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return the current
- * block state.
- * This function does not perform lazy evaluation of matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local block_state deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL; /* head of the hash chain */
-    int bflush;           /* set if current block must be flushed */
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-	        return need_more;
-	    }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            bflush = _tr_tally(s, s->strstart - s->match_start,
-                               s->match_length - MIN_MATCH);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in hash table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++; 
-            } else {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            bflush = _tr_tally (s, 0, s->window[s->strstart]);
-            s->lookahead--;
-            s->strstart++; 
-        }
-        if (bflush) FLUSH_BLOCK(s, 0);
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local block_state deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL;    /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
-	        return need_more;
-	    }
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
-                 (s->match_length == MIN_MATCH &&
-                  s->strstart - s->match_start > TOO_FAR))) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            bflush = _tr_tally(s, s->strstart -1 - s->prev_match,
-                               s->prev_length - MIN_MATCH);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, 0);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            if (_tr_tally (s, 0, s->window[s->strstart-1])) {
-                FLUSH_BLOCK_ONLY(s, 0);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return need_more;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally (s, 0, s->window[s->strstart-1]);
-        s->match_available = 0;
-    }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
-    return flush == Z_FINISH ? finish_done : block_done;
-}
-/* --- deflate.c */
-
-/* +++ trees.c */
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-1996 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process uses several Huffman trees. The more
- *      common source values are represented by shorter bit sequences.
- *
- *      Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values).  The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      Storer, James A.
- *          Data Compression:  Methods and Theory, pp. 49-50.
- *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
- *
- *      Sedgewick, R.
- *          Algorithms, p290.
- *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* From: trees.c,v 1.11 1996/07/24 13:41:06 me Exp $ */
-
-/* #include "deflate.h" */
-
-#ifdef DEBUG_ZLIB
-#  include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6      16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10    17
-/* repeat a zero length 3-10 times  (3 bits of repeat count) */
-
-#define REPZ_11_138  18
-/* repeat a zero length 11-138 times  (7 bits of repeat count) */
-
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
-   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
-   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
-   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local uch bl_order[BL_CODES]
-   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
-    intf    *extra_bits;         /* extra bits for each code or NULL */
-    int     extra_base;          /* base index for extra_bits */
-    int     elems;               /* max number of elements in the tree */
-    int     max_length;          /* max bit length for the codes */
-};
-
-local static_tree_desc  static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc  static_d_desc =
-{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
-
-local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void tr_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
-                              ct_data *dtree));
-local void set_data_type  OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
-
-#ifndef DEBUG_ZLIB
-#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
-   /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG_ZLIB */
-#  define send_code(s, c, tree) \
-     { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
-       send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
-    Tracevv((stderr," l %2d v %4x ", length, value));
-    Assert(length > 0 && length <= 15, "invalid length");
-    s->bits_sent += (ulg)length;
-
-    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
-     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
-     * unused bits in value.
-     */
-    if (s->bi_valid > (int)Buf_size - length) {
-        s->bi_buf |= (value << s->bi_valid);
-        put_short(s, s->bi_buf);
-        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
-        s->bi_valid += length - Buf_size;
-    } else {
-        s->bi_buf |= value << s->bi_valid;
-        s->bi_valid += length;
-    }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
-  if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
-    s->bi_buf |= (val << s->bi_valid);\
-    put_short(s, s->bi_buf);\
-    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
-    s->bi_valid += len - Buf_size;\
-  } else {\
-    s->bi_buf |= (value) << s->bi_valid;\
-    s->bi_valid += len;\
-  }\
-}
-#endif /* DEBUG_ZLIB */
-
-
-#define MAX(a,b) (a >= b ? a : b)
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
- */
-local void tr_static_init()
-{
-    static int static_init_done = 0;
-    int n;        /* iterates over tree elements */
-    int bits;     /* bit counter */
-    int length;   /* length value */
-    int code;     /* code value */
-    int dist;     /* distance index */
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    if (static_init_done) return;
-
-    /* Initialize the mapping length (0..255) -> length code (0..28) */
-    length = 0;
-    for (code = 0; code < LENGTH_CODES-1; code++) {
-        base_length[code] = length;
-        for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
-        }
-    }
-    Assert (length == 256, "tr_static_init: length != 256");
-    /* Note that the length 255 (match length 258) can be represented
-     * in two different ways: code 284 + 5 bits or code 285, so we
-     * overwrite length_code[255] to use the best encoding:
-     */
-    length_code[length-1] = (uch)code;
-
-    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
-    dist = 0;
-    for (code = 0 ; code < 16; code++) {
-        base_dist[code] = dist;
-        for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: dist != 256");
-    dist >>= 7; /* from now on, all distances are divided by 128 */
-    for ( ; code < D_CODES; code++) {
-        base_dist[code] = dist << 7;
-        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "tr_static_init: 256+dist != 512");
-
-    /* Construct the codes of the static literal tree */
-    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
-    n = 0;
-    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
-    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
-    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
-    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
-    /* Codes 286 and 287 do not exist, but we must include them in the
-     * tree construction to get a canonical Huffman tree (longest code
-     * all ones)
-     */
-    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
-    /* The static distance tree is trivial: */
-    for (n = 0; n < D_CODES; n++) {
-        static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
-    }
-    static_init_done = 1;
-}
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-void _tr_init(s)
-    deflate_state *s;
-{
-    tr_static_init();
-
-    s->compressed_len = 0L;
-
-    s->l_desc.dyn_tree = s->dyn_ltree;
-    s->l_desc.stat_desc = &static_l_desc;
-
-    s->d_desc.dyn_tree = s->dyn_dtree;
-    s->d_desc.stat_desc = &static_d_desc;
-
-    s->bl_desc.dyn_tree = s->bl_tree;
-    s->bl_desc.stat_desc = &static_bl_desc;
-
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG_ZLIB
-    s->bits_sent = 0L;
-#endif
-
-    /* Initialize the first block of the first file: */
-    init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
-    top = s->heap[SMALLEST]; \
-    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
-    pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
-   (tree[n].Freq < tree[m].Freq || \
-   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
-    int v = s->heap[k];
-    int j = k << 1;  /* left son of k */
-    while (j <= s->heap_len) {
-        /* Set j to the smallest of the two sons: */
-        if (j < s->heap_len &&
-            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
-            j++;
-        }
-        /* Exit if v is smaller than both sons */
-        if (smaller(tree, v, s->heap[j], s->depth)) break;
-
-        /* Exchange v with the smallest son */
-        s->heap[k] = s->heap[j];  k = j;
-
-        /* And continue down the tree, setting j to the left son of k */
-        j <<= 1;
-    }
-    s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- *    above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- *     array bl_count contains the frequencies for each bit length.
- *     The length opt_len is updated; static_len is also updated if stree is
- *     not null.
- */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
-    ct_data *tree  = desc->dyn_tree;
-    int max_code   = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
-    intf *extra    = desc->stat_desc->extra_bits;
-    int base       = desc->stat_desc->extra_base;
-    int max_length = desc->stat_desc->max_length;
-    int h;              /* heap index */
-    int n, m;           /* iterate over the tree elements */
-    int bits;           /* bit length */
-    int xbits;          /* extra bits */
-    ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
-
-    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
-    /* In a first pass, compute the optimal bit lengths (which may
-     * overflow in the case of the bit length tree).
-     */
-    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
-    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
-        n = s->heap[h];
-        bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
-        tree[n].Len = (ush)bits;
-        /* We overwrite tree[n].Dad which is no longer needed */
-
-        if (n > max_code) continue; /* not a leaf node */
-
-        s->bl_count[bits]++;
-        xbits = 0;
-        if (n >= base) xbits = extra[n-base];
-        f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
-    }
-    if (overflow == 0) return;
-
-    Trace((stderr,"\nbit length overflow\n"));
-    /* This happens for example on obj2 and pic of the Calgary corpus */
-
-    /* Find the first bit length which could increase: */
-    do {
-        bits = max_length-1;
-        while (s->bl_count[bits] == 0) bits--;
-        s->bl_count[bits]--;      /* move one leaf down the tree */
-        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
-        s->bl_count[max_length]--;
-        /* The brother of the overflow item also moves one step up,
-         * but this does not affect bl_count[max_length]
-         */
-        overflow -= 2;
-    } while (overflow > 0);
-
-    /* Now recompute all bit lengths, scanning in increasing frequency.
-     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
-     * lengths instead of fixing only the wrong ones. This idea is taken
-     * from 'ar' written by Haruhiko Okumura.)
-     */
-    for (bits = max_length; bits != 0; bits--) {
-        n = s->bl_count[bits];
-        while (n != 0) {
-            m = s->heap[--h];
-            if (m > max_code) continue;
-            if (tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
-                tree[m].Len = (ush)bits;
-            }
-            n--;
-        }
-    }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = bi_reverse(next_code[len]++, len);
-
-        Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
-    }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- *     and corresponding code. The length opt_len is updated; static_len is
- *     also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
-    ct_data *tree   = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
-    int elems       = desc->stat_desc->elems;
-    int n, m;          /* iterate over heap elements */
-    int max_code = -1; /* largest code with non zero frequency */
-    int node;          /* new node being created */
-
-    /* Construct the initial heap, with least frequent element in
-     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-     * heap[0] is not used.
-     */
-    s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
-    for (n = 0; n < elems; n++) {
-        if (tree[n].Freq != 0) {
-            s->heap[++(s->heap_len)] = max_code = n;
-            s->depth[n] = 0;
-        } else {
-            tree[n].Len = 0;
-        }
-    }
-
-    /* The pkzip format requires that at least one distance code exists,
-     * and that at least one bit should be sent even if there is only one
-     * possible code. So to avoid special checks later on we force at least
-     * two codes of non zero frequency.
-     */
-    while (s->heap_len < 2) {
-        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
-        tree[node].Freq = 1;
-        s->depth[node] = 0;
-        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
-        /* node is 0 or 1 so it does not have extra bits */
-    }
-    desc->max_code = max_code;
-
-    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-     * establish sub-heaps of increasing lengths:
-     */
-    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
-    /* Construct the Huffman tree by repeatedly combining the least two
-     * frequent nodes.
-     */
-    node = elems;              /* next internal node of the tree */
-    do {
-        pqremove(s, tree, n);  /* n = node of least frequency */
-        m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
-        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
-        s->heap[--(s->heap_max)] = m;
-
-        /* Create a new node father of n and m */
-        tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
-        tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
-        if (tree == s->bl_tree) {
-            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
-                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
-        }
-#endif
-        /* and insert the new node in the heap */
-        s->heap[SMALLEST] = node++;
-        pqdownheap(s, tree, SMALLEST);
-
-    } while (s->heap_len >= 2);
-
-    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
-    /* At this point, the fields freq and dad are set. We can now
-     * generate the bit lengths.
-     */
-    gen_bitlen(s, (tree_desc *)desc);
-
-    /* The field len is now set, we can generate the bit codes */
-    gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    if (nextlen == 0) max_count = 138, min_count = 3;
-    tree[max_code+1].Len = (ush)0xffff; /* guard */
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += count;
-        } else if (curlen != 0) {
-            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
-            s->bl_tree[REP_3_6].Freq++;
-        } else if (count <= 10) {
-            s->bl_tree[REPZ_3_10].Freq++;
-        } else {
-            s->bl_tree[REPZ_11_138].Freq++;
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    /* tree[max_code+1].Len = -1; */  /* guard already set */
-    if (nextlen == 0) max_count = 138, min_count = 3;
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
-        } else if (curlen != 0) {
-            if (curlen != prevlen) {
-                send_code(s, curlen, s->bl_tree); count--;
-            }
-            Assert(count >= 3 && count <= 6, " 3_6?");
-            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
-        } else if (count <= 10) {
-            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
-        } else {
-            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
-    int max_blindex;  /* index of last bit length code of non zero freq */
-
-    /* Determine the bit length frequencies for literal and distance trees */
-    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
-    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
-    /* Build the bit length tree: */
-    build_tree(s, (tree_desc *)(&(s->bl_desc)));
-    /* opt_len now includes the length of the tree representations, except
-     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
-     */
-
-    /* Determine the number of bit length codes to send. The pkzip format
-     * requires that at least 4 bit length codes be sent. (appnote.txt says
-     * 3 but the actual value used is 4.)
-     */
-    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
-        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
-    }
-    /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
-    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
-            s->opt_len, s->static_len));
-
-    return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
-    int rank;                    /* index in bl_order */
-
-    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
-    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
-            "too many codes");
-    Tracev((stderr, "\nbl counts: "));
-    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
-    send_bits(s, dcodes-1,   5);
-    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
-    for (rank = 0; rank < blcodes; rank++) {
-        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
-        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
-    }
-    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
-    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
-    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-void _tr_stored_block(s, buf, stored_len, eof)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int eof;          /* true if this is the last block for a file */
-{
-    send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
-    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
-    s->compressed_len += (stored_len + 4) << 3;
-
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* Send just the `stored block' type code without any length bytes or data.
- */
-void _tr_stored_type_only(s)
-    deflate_state *s;
-{
-    send_bits(s, (STORED_BLOCK << 1), 3);
-    bi_windup(s);
-    s->compressed_len = (s->compressed_len + 3) & ~7L;
-}
-
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
- */
-void _tr_align(s)
-    deflate_state *s;
-{
-    send_bits(s, STATIC_TREES<<1, 3);
-    send_code(s, END_BLOCK, static_ltree);
-    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-    bi_flush(s);
-    /* Of the 10 bits for the empty block, we have already sent
-     * (10 - bi_valid) bits. The lookahead for the last real code (before
-     * the EOB of the previous block) was thus at least one plus the length
-     * of the EOB plus what we have just sent of the empty static block.
-     */
-    if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
-        send_bits(s, STATIC_TREES<<1, 3);
-        send_code(s, END_BLOCK, static_ltree);
-        s->compressed_len += 10L;
-        bi_flush(s);
-    }
-    s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
- */
-ulg _tr_flush_block(s, buf, stored_len, eof)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int eof;          /* true if this is the last block for a file */
-{
-    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex = 0;  /* index of last bit length code of non zero freq */
-
-    /* Build the Huffman trees unless a stored block is forced */
-    if (s->level > 0) {
-
-	 /* Check if the file is ascii or binary */
-	if (s->data_type == Z_UNKNOWN) set_data_type(s);
-
-	/* Construct the literal and distance trees */
-	build_tree(s, (tree_desc *)(&(s->l_desc)));
-	Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-		s->static_len));
-
-	build_tree(s, (tree_desc *)(&(s->d_desc)));
-	Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-		s->static_len));
-	/* At this point, opt_len and static_len are the total bit lengths of
-	 * the compressed block data, excluding the tree representations.
-	 */
-
-	/* Build the bit length tree for the above two trees, and get the index
-	 * in bl_order of the last bit length code to send.
-	 */
-	max_blindex = build_bl_tree(s);
-
-	/* Determine the best encoding. Compute first the block length in bytes*/
-	opt_lenb = (s->opt_len+3+7)>>3;
-	static_lenb = (s->static_len+3+7)>>3;
-
-	Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-		opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-		s->last_lit));
-
-	if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
-    } else {
-        Assert(buf != (char*)0, "lost buf");
-	opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
-    }
-
-    /* If compression failed and this is the first and last block,
-     * and if the .zip file can be seeked (to rewrite the local header),
-     * the whole file is transformed into a stored file:
-     */
-#ifdef STORED_FILE_OK
-#  ifdef FORCE_STORED_FILE
-    if (eof && s->compressed_len == 0L) { /* force stored file */
-#  else
-    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
-#  endif
-        /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
-        if (buf == (charf*)0) error ("block vanished");
-
-        copy_block(s, buf, (unsigned)stored_len, 0); /* without header */
-        s->compressed_len = stored_len << 3;
-        s->method = STORED;
-    } else
-#endif /* STORED_FILE_OK */
-
-#ifdef FORCE_STORED
-    if (buf != (char*)0) { /* force stored block */
-#else
-    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
-                       /* 4: two words for the lengths */
-#endif
-        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-         * Otherwise we can't have processed more than WSIZE input bytes since
-         * the last block flush, because compression would have been
-         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-         * transform a block into a stored block.
-         */
-        _tr_stored_block(s, buf, stored_len, eof);
-
-#ifdef FORCE_STATIC
-    } else if (static_lenb >= 0) { /* force static trees */
-#else
-    } else if (static_lenb == opt_lenb) {
-#endif
-        send_bits(s, (STATIC_TREES<<1)+eof, 3);
-        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-        s->compressed_len += 3 + s->static_len;
-    } else {
-        send_bits(s, (DYN_TREES<<1)+eof, 3);
-        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
-                       max_blindex+1);
-        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-        s->compressed_len += 3 + s->opt_len;
-    }
-    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
-    init_block(s);
-
-    if (eof) {
-        bi_windup(s);
-        s->compressed_len += 7;  /* align on byte boundary */
-    }
-    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
-           s->compressed_len-7*eof));
-
-    return s->compressed_len >> 3;
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-int _tr_tally (s, dist, lc)
-    deflate_state *s;
-    unsigned dist;  /* distance of matched string */
-    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
-    s->d_buf[s->last_lit] = (ush)dist;
-    s->l_buf[s->last_lit++] = (uch)lc;
-    if (dist == 0) {
-        /* lc is the unmatched char */
-        s->dyn_ltree[lc].Freq++;
-    } else {
-        s->matches++;
-        /* Here, lc is the match length - MIN_MATCH */
-        dist--;             /* dist = match distance - 1 */
-        Assert((ush)dist < (ush)MAX_DIST(s) &&
-               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
-
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
-        s->dyn_dtree[d_code(dist)].Freq++;
-    }
-
-    /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
-        /* Compute an upper bound for the compressed length */
-        ulg out_length = (ulg)s->last_lit*8L;
-        ulg in_length = (ulg)((long)s->strstart - s->block_start);
-        int dcode;
-        for (dcode = 0; dcode < D_CODES; dcode++) {
-            out_length += (ulg)s->dyn_dtree[dcode].Freq *
-                (5L+extra_dbits[dcode]);
-        }
-        out_length >>= 3;
-        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
-               s->last_lit, in_length, out_length,
-               100L - out_length*100L/in_length));
-        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
-    }
-    return (s->last_lit == s->lit_bufsize-1);
-    /* We avoid equality with lit_bufsize because of wraparound at 64K
-     * on 16 bit machines and because stored blocks are restricted to
-     * 64K-1 bytes.
-     */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    ct_data *ltree; /* literal tree */
-    ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned lx = 0;    /* running index in l_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->last_lit != 0) do {
-        dist = s->d_buf[lx];
-        lc = s->l_buf[lx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
-            send_code(s, code+LITERALS+1, ltree); /* send the length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
-    } while (lx < s->last_lit);
-
-    send_code(s, END_BLOCK, ltree);
-    s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
-    deflate_state *s;
-{
-    int n = 0;
-    unsigned ascii_freq = 0;
-    unsigned bin_freq = 0;
-    while (n < 7)        bin_freq += s->dyn_ltree[n++].Freq;
-    while (n < 128)    ascii_freq += s->dyn_ltree[n++].Freq;
-    while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
-    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
-    unsigned code; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= code & 1;
-        code >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef DEBUG_ZLIB
-    s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-
-    if (header) {
-        put_short(s, (ush)len);   
-        put_short(s, (ush)~len);
-#ifdef DEBUG_ZLIB
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG_ZLIB
-    s->bits_sent += (ulg)len<<3;
-#endif
-    /* bundle up the put_byte(s, *buf++) calls */
-    zmemcpy(&s->pending_buf[s->pending], buf, len);
-    s->pending += len;
-}
-/* --- trees.c */
-
-/* +++ inflate.c */
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-
-/* +++ infblock.h */
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-extern inflate_blocks_statef * inflate_blocks_new OF((
-    z_streamp z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-extern int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));                      /* initial return code */
-
-extern void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    uLongf *));                  /* check value on output */
-
-extern int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    uLongf *));                  /* check value on output */
-
-extern void inflate_set_dictionary OF((
-    inflate_blocks_statef *s,
-    const Bytef *d,  /* dictionary */
-    uInt  n));       /* dictionary length */
-
-extern int inflate_addhistory OF((
-    inflate_blocks_statef *,
-    z_streamp));
-
-extern int inflate_packet_flush OF((
-    inflate_blocks_statef *));
-/* --- infblock.h */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* inflate private state */
-struct internal_state {
-
-  /* mode */
-  enum {
-      METHOD,   /* waiting for method byte */
-      FLAG,     /* waiting for flag byte */
-      DICT4,    /* four dictionary check bytes to go */
-      DICT3,    /* three dictionary check bytes to go */
-      DICT2,    /* two dictionary check bytes to go */
-      DICT1,    /* one dictionary check byte to go */
-      DICT0,    /* waiting for inflateSetDictionary */
-      BLOCKS,   /* decompressing blocks */
-      CHECK4,   /* four check bytes to go */
-      CHECK3,   /* three check bytes to go */
-      CHECK2,   /* two check bytes to go */
-      CHECK1,   /* one check byte to go */
-      DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
-
-  /* mode dependent information */
-  union {
-    uInt method;        /* if FLAGS, method byte */
-    struct {
-      uLong was;                /* computed check value */
-      uLong need;               /* stream check value */
-    } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
-  } sub;        /* submode */
-
-  /* mode independent information */
-  int  nowrap;          /* flag for no wrapper */
-  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
-  inflate_blocks_statef 
-    *blocks;            /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_streamp z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
-  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
-  Trace((stderr, "inflate: reset\n"));
-  return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_streamp z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
-  ZFREE(z, z->state);
-  z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
-  return Z_OK;
-}
-
-
-int inflateInit2_(z, w, version, stream_size)
-z_streamp z;
-int w;
-const char *version;
-int stream_size;
-{
-  if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
-      stream_size != sizeof(z_stream))
-      return Z_VERSION_ERROR;
-
-  /* initialize state */
-  if (z == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->msg = Z_NULL;
-#ifndef NO_ZCFUNCS
-  if (z->zalloc == Z_NULL)
-  {
-    z->zalloc = zcalloc;
-    z->opaque = (voidpf)0;
-  }
-  if (z->zfree == Z_NULL) z->zfree = zcfree;
-#endif
-  if ((z->state = (struct internal_state FAR *)
-       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
-    return Z_MEM_ERROR;
-  z->state->blocks = Z_NULL;
-
-  /* handle undocumented nowrap option (no zlib header or check) */
-  z->state->nowrap = 0;
-  if (w < 0)
-  {
-    w = - w;
-    z->state->nowrap = 1;
-  }
-
-  /* set window size */
-  if (w < 8 || w > 15)
-  {
-    inflateEnd(z);
-    return Z_STREAM_ERROR;
-  }
-  z->state->wbits = (uInt)w;
-
-  /* create inflate_blocks state */
-  if ((z->state->blocks =
-      inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
-      == Z_NULL)
-  {
-    inflateEnd(z);
-    return Z_MEM_ERROR;
-  }
-  Trace((stderr, "inflate: allocated\n"));
-
-  /* reset state */
-  inflateReset(z);
-  return Z_OK;
-}
-
-
-int inflateInit_(z, version, stream_size)
-z_streamp z;
-const char *version;
-int stream_size;
-{
-  return inflateInit2_(z, DEF_WBITS, version, stream_size);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_streamp z;
-int f;
-{
-  int r;
-  uInt b;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0)
-    return Z_STREAM_ERROR;
-  r = Z_BUF_ERROR;
-  while (1) switch (z->state->mode)
-  {
-    case METHOD:
-      NEEDBYTE
-      if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"unknown compression method";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"invalid window size";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      z->state->mode = FLAG;
-    case FLAG:
-      NEEDBYTE
-      b = NEXTBYTE;
-      if (((z->state->sub.method << 8) + b) % 31)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"incorrect header check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib header ok\n"));
-      if (!(b & PRESET_DICT))
-      {
-        z->state->mode = BLOCKS;
-	break;
-      }
-      z->state->mode = DICT4;
-    case DICT4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = DICT3;
-    case DICT3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = DICT2;
-    case DICT2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = DICT1;
-    case DICT1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-      z->adler = z->state->sub.check.need;
-      z->state->mode = DICT0;
-      return Z_NEED_DICT;
-    case DICT0:
-      z->state->mode = BAD;
-      z->msg = (char*)"need dictionary";
-      z->state->sub.marker = 0;       /* can try inflateSync */
-      return Z_STREAM_ERROR;
-    case BLOCKS:
-      r = inflate_blocks(z->state->blocks, z, r);
-      if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
-	  r = inflate_packet_flush(z->state->blocks);
-      if (r == Z_DATA_ERROR)
-      {
-        z->state->mode = BAD;
-        z->state->sub.marker = 0;       /* can try inflateSync */
-        break;
-      }
-      if (r != Z_STREAM_END)
-        return r;
-      r = Z_OK;
-      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
-      if (z->state->nowrap)
-      {
-        z->state->mode = DONE;
-        break;
-      }
-      z->state->mode = CHECK4;
-    case CHECK4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = CHECK3;
-    case CHECK3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = CHECK2;
-    case CHECK2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = CHECK1;
-    case CHECK1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-
-      if (z->state->sub.check.was != z->state->sub.check.need)
-      {
-        z->state->mode = BAD;
-        z->msg = (char*)"incorrect data check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib check ok\n"));
-      z->state->mode = DONE;
-    case DONE:
-      return Z_STREAM_END;
-    case BAD:
-      return Z_DATA_ERROR;
-    default:
-      return Z_STREAM_ERROR;
-  }
-
- empty:
-  if (f != Z_PACKET_FLUSH)
-    return r;
-  z->state->mode = BAD;
-  z->msg = (char *)"need more for packet flush";
-  z->state->sub.marker = 0;       /* can try inflateSync */
-  return Z_DATA_ERROR;
-}
-
-
-int inflateSetDictionary(z, dictionary, dictLength)
-z_streamp z;
-const Bytef *dictionary;
-uInt  dictLength;
-{
-  uInt length = dictLength;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
-    return Z_STREAM_ERROR;
-
-  if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
-  z->adler = 1L;
-
-  if (length >= ((uInt)1<<z->state->wbits))
-  {
-    length = (1<<z->state->wbits)-1;
-    dictionary += dictLength - length;
-  }
-  inflate_set_dictionary(z->state->blocks, dictionary, length);
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(z)
-z_stream *z;
-{
-    if (z->state->mode != BLOCKS)
-	return Z_DATA_ERROR;
-    return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(z)
-z_streamp z;
-{
-  uInt n;       /* number of bytes to look at */
-  Bytef *p;     /* pointer to bytes */
-  uInt m;       /* number of marker bytes found in a row */
-  uLong r, w;   /* temporaries to save total_in and total_out */
-
-  /* set up */
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->mode != BAD)
-  {
-    z->state->mode = BAD;
-    z->state->sub.marker = 0;
-  }
-  if ((n = z->avail_in) == 0)
-    return Z_BUF_ERROR;
-  p = z->next_in;
-  m = z->state->sub.marker;
-
-  /* search */
-  while (n && m < 4)
-  {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
-      m++;
-    else if (*p)
-      m = 0;
-    else
-      m = 4 - m;
-    p++, n--;
-  }
-
-  /* restore */
-  z->total_in += p - z->next_in;
-  z->next_in = p;
-  z->avail_in = n;
-  z->state->sub.marker = m;
-
-  /* return no joy or set up to restart on a new block */
-  if (m != 4)
-    return Z_DATA_ERROR;
-  r = z->total_in;  w = z->total_out;
-  inflateReset(z);
-  z->total_in = r;  z->total_out = w;
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-/* --- inflate.c */
-
-/* +++ infblock.c */
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "infblock.h" */
-
-/* +++ inftrees.h */
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
-  union {
-    uInt Base;          /* literal, length base, or distance base */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
-};
-
-#ifdef DEBUG_ZLIB
-  extern uInt inflate_hufts;
-#endif
-
-extern int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    z_streamp ));               /* for zalloc, zfree functions */
-
-extern int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    z_streamp ));               /* for zalloc, zfree functions */
-
-extern int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
-
-extern int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_streamp ));               /* for zfree function */
-
-/* --- inftrees.h */
-
-/* +++ infcodes.h */
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-extern inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_streamp ));
-
-extern int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-extern void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_streamp ));
-
-/* --- infcodes.h */
-
-/* +++ infutil.h */
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-#ifndef _INFUTIL_H
-#define _INFUTIL_H
-
-typedef enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONEB,    /* finished last block, done */
-      BADB}     /* got a data error--stuck here */
-inflate_block_mode;
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  inflate_block_mode  mode;     /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_huft *tl;
-      inflate_huft *td;         /* trees to free */
-      inflate_codes_statef 
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WWRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WWRAP if(m==0){FLUSH WWRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt inflate_mask[17];
-
-/* copy as much as possible from the sliding window to the output area */
-extern int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_streamp ,
-    int));
-
-#ifndef NO_DUMMY_DECL
-struct internal_state      {int dummy;}; /* for buggy compilers */
-#endif
-
-#endif
-/* --- infutil.h */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local const uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
-  if (s->checkfn != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens);
-  if (s->mode == CODES)
-  {
-    inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
-}
-
-
-inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_streamp z;
-check_func c;
-uInt w;
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s);
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
-  return s;
-}
-
-
-#ifdef DEBUG_ZLIB
-  extern uInt inflate_hufts;
-#endif
-int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = BADB;
-          z->msg = (char*)"invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
-      {
-        s->mode = BADB;
-        z->msg = (char*)"invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = BADB;
-        z->msg = (char*)"too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
-      if (t != Z_OK)
-      {
-        ZFREE(z, s->sub.trees.blens);
-        r = t;
-        if (r == Z_DATA_ERROR)
-          s->mode = BADB;
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
-        c = h->more.Base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            inflate_trees_free(s->sub.trees.tb, z);
-            ZFREE(z, s->sub.trees.blens);
-            s->mode = BADB;
-            z->msg = (char*)"invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      inflate_trees_free(s->sub.trees.tb, z);
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-#ifdef DEBUG_ZLIB
-      inflate_hufts = 0;
-#endif
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
-        ZFREE(z, s->sub.trees.blens);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-            s->mode = BADB;
-          r = t;
-          LEAVE
-        }
-        Tracev((stderr, "inflate:       trees ok, %d * %d bytes used\n",
-              inflate_hufts, sizeof(inflate_huft)));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
-      }
-      s->mode = CODES;
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
-      s->mode = DRY;
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONEB;
-    case DONEB:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADB:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_streamp z;
-uLongf *c;
-{
-  inflate_blocks_reset(s, z, c);
-  ZFREE(z, s->window);
-  ZFREE(z, s);
-  Trace((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-
-void inflate_set_dictionary(s, d, n)
-inflate_blocks_statef *s;
-const Bytef *d;
-uInt  n;
-{
-  zmemcpy((charf *)s->window, d, n);
-  s->read = s->write = s->window + n;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-int inflate_addhistory(s, z)
-inflate_blocks_statef *s;
-z_stream *z;
-{
-    uLong b;              /* bit buffer */  /* NOT USED HERE */
-    uInt k;               /* bits in bit buffer */ /* NOT USED HERE */
-    uInt t;               /* temporary storage */
-    Bytef *p;             /* input data pointer */
-    uInt n;               /* bytes available there */
-    Bytef *q;             /* output window write pointer */
-    uInt m;               /* bytes to end of window or read pointer */
-
-    if (s->read != s->write)
-	return Z_STREAM_ERROR;
-    if (s->mode != TYPE)
-	return Z_DATA_ERROR;
-
-    /* we're ready to rock */
-    LOAD
-    /* while there is input ready, copy to output buffer, moving
-     * pointers as needed.
-     */
-    while (n) {
-	t = n;  /* how many to do */
-	/* is there room until end of buffer? */
-	if (t > m) t = m;
-	/* update check information */
-	if (s->checkfn != Z_NULL)
-	    s->check = (*s->checkfn)(s->check, q, t);
-	zmemcpy(q, p, t);
-	q += t;
-	p += t;
-	n -= t;
-	z->total_out += t;
-	s->read = q;    /* drag read pointer forward */
-/*      WWRAP  */ 	/* expand WWRAP macro by hand to handle s->read */
-	if (q == s->end) {
-	    s->read = q = s->window;
-	    m = WAVAIL;
-	}
-    }
-    UPDATE
-    return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-int inflate_packet_flush(s)
-    inflate_blocks_statef *s;
-{
-    if (s->mode != LENS)
-	return Z_DATA_ERROR;
-    s->mode = TYPE;
-    return Z_OK;
-}
-/* --- infblock.c */
-
-/* +++ inftrees.c */
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-
-char inflate_copyright[] = " inflate 1.0.4 Copyright 1995-1996 Mark Adler ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-#ifndef NO_DUMMY_DECL
-struct internal_state  {int dummy;}; /* for buggy compilers */
-#endif
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    const uIntf *,      /* list of base values for non-simple codes */
-    const uIntf *,      /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    z_streamp ));       /* for zalloc function */
-
-local voidpf falloc OF((
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* see note #13 above about 258 */
-local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local const uInt cpdext[30] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= N_MAX) */
-uInt s;                 /* number of simple-valued codes (0..s-1) */
-const uIntf *d;         /* list of base values for non-simple codes */
-const uIntf *e;         /* list of extra bits for non-simple codes */
-inflate_huft * FAR *t;  /* result: starting table */
-uIntf *m;               /* maximum lookup bits, returns actual */
-z_streamp zs;           /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of
-   lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register uInt i;              /* counter, current code */
-  register uInt j;              /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  register uIntf *p;            /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
-  register int w;               /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
-
-
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_OK;
-  }
-
-
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
-
-
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
-
-
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
-
-
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-  n = x[g];                   /* set n to length of v */
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = g - w;
-        z = z > (uInt)l ? l : z;        /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
-        }
-        z = 1 << j;             /* table entries for j-bit table */
-
-        /* allocate and link in new table */
-        if ((q = (inflate_huft *)ZALLOC
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
-          return Z_MEM_ERROR;   /* not enough memory */
-        }
-#ifdef DEBUG_ZLIB
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
-
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
-          u[h-1][j] = r;        /* connect to last table */
-        }
-      }
-
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
-
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
-
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
-
-      /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-      }
-    }
-  }
-
-
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-int inflate_trees_bits(c, bb, tb, z)
-uIntf *c;               /* 19 code lengths */
-uIntf *bb;              /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_streamp z;            /* for zfree function */
-{
-  int r;
-
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
-  if (r == Z_DATA_ERROR)
-    z->msg = (char*)"oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR || *bb == 0)
-  {
-    inflate_trees_free(*tb, z);
-    z->msg = (char*)"incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  return r;
-}
-
-
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl;                /* number of literal/length codes */
-uInt nd;                /* number of distance codes */
-uIntf *c;               /* that many (total) code lengths */
-uIntf *bl;              /* literal desired/actual bit depth */
-uIntf *bd;              /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_streamp z;            /* for zfree function */
-{
-  int r;
-
-  /* build literal/length tree */
-  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z);
-  if (r != Z_OK || *bl == 0)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed literal/length tree";
-    else if (r != Z_MEM_ERROR)
-    {
-      inflate_trees_free(*tl, z);
-      z->msg = (char*)"incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    return r;
-  }
-
-  /* build distance tree */
-  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z);
-  if (r != Z_OK || (*bd == 0 && nl > 257))
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed distance tree";
-    else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
-    }
-#else
-      inflate_trees_free(*td, z);
-      z->msg = (char*)"incomplete distance tree";
-      r = Z_DATA_ERROR;
-    }
-    else if (r != Z_MEM_ERROR)
-    {
-      z->msg = (char*)"empty distance tree with lengths";
-      r = Z_DATA_ERROR;
-    }
-    inflate_trees_free(*tl, z);
-    return r;
-#endif
-  }
-
-  /* done */
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q;       /* opaque pointer */
-uInt n;         /* number of items */
-uInt s;         /* size of item */
-{
-  Assert(s == sizeof(inflate_huft) && n <= *(intf *)q,
-         "inflate_trees falloc overflow");
-  *(intf *)q -= n+s-s; /* s-s to avoid warning */
-  return (voidpf)(fixed_mem + *(intf *)q);
-}
-
-
-int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl;               /* literal desired/actual bit depth */
-uIntf *bd;               /* distance desired/actual bit depth */
-inflate_huft * FAR *tl;  /* literal/length tree result */
-inflate_huft * FAR *td;  /* distance tree result */
-{
-  /* build fixed tables if not already (multiple overlapped executions ok) */
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
-    z_stream z;         /* for falloc function */
-    int f = FIXEDH;     /* number of hufts left in fixed_mem */
-
-    /* set up fake z_stream for memory routines */
-    z.zalloc = falloc;
-    z.zfree = Z_NULL;
-    z.opaque = (voidpf)&f;
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
-    /* done */
-    Assert(f == 0, "invalid build of fixed tables");
-    fixed_built = 1;
-  }
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
-}
-
-
-int inflate_trees_free(t, z)
-inflate_huft *t;        /* table to free */
-z_streamp z;            /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q, *r;
-
-  /* Reverse linked list */
-  p = Z_NULL;
-  q = t;
-  while (q != Z_NULL)
-  {
-    r = (q - 1)->next;
-    (q - 1)->next = p;
-    p = q;
-    q = r;
-  }
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z,p);
-    p = q;
-  } 
-  return Z_OK;
-}
-/* --- inftrees.c */
-
-/* +++ infcodes.c */
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-/* #include "infblock.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-
-/* +++ inffast.h */
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-extern int inflate_fast OF((
-    uInt,
-    uInt,
-    inflate_huft *,
-    inflate_huft *,
-    inflate_blocks_statef *,
-    z_streamp ));
-/* --- inffast.h */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-z_streamp z;
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = (char*)"invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-    case COPY:          /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
-      f = (uInt)(q - s->window) < c->sub.copy.dist ?
-          s->end - (c->sub.copy.dist - (q - s->window)) :
-          q - c->sub.copy.dist;
-#else
-      f = q - c->sub.copy.dist;
-      if ((uInt)(q - s->window) < c->sub.copy.dist)
-        f = s->end - (c->sub.copy.dist - (uInt)(q - s->window));
-#endif
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_streamp z;
-{
-  ZFREE(z, c);
-  Tracev((stderr, "inflate:       codes free\n"));
-}
-/* --- infcodes.c */
-
-/* +++ infutil.c */
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "infblock.h" */
-/* #include "inftrees.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* And'ing with mask[n] masks the lower n bits */
-uInt inflate_mask[17] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-
-/* copy as much as possible from the sliding window to the output area */
-int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_streamp z;
-int r;
-{
-  uInt n;
-  Bytef *p;
-  Bytef *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  if (p != Z_NULL) {
-    zmemcpy(p, q, n);
-    p += n;
-  }
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      z->adler = s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    if (p != Z_NULL) {
-      zmemcpy(p, q, n);
-      p += n;
-    }
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}
-/* --- infutil.c */
-
-/* +++ inffast.c */
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* #include "zutil.h" */
-/* #include "inftrees.h" */
-/* #include "infblock.h" */
-/* #include "infcodes.h" */
-/* #include "infutil.h" */
-/* #include "inffast.h" */
-
-#ifndef NO_DUMMY_DECL
-struct inflate_codes_state {int dummy;}; /* for buggy compilers */
-#endif
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
-   (the maximum string length) and number of input bytes available
-   at least ten.  The ten bytes are six bytes for the longest length/
-   distance pair plus four bytes for overloading the bit buffer. */
-
-int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl;
-inflate_huft *td; /* need separate declaration for Borland C++ */
-inflate_blocks_statef *s;
-z_streamp z;
-{
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  uInt ml;              /* mask for literal/length tree */
-  uInt md;              /* mask for distance tree */
-  uInt c;               /* bytes to copy */
-  uInt d;               /* distance back to copy from */
-  Bytef *r;             /* copy source pointer */
-
-  /* load input, output, bit values */
-  LOAD
-
-  /* initialize masks */
-  ml = inflate_mask[bl];
-  md = inflate_mask[bd];
-
-  /* do until not enough input or output space for fast loop */
-  do {                          /* assume called with m >= 258 && n >= 10 */
-    /* get literal/length code */
-    GRABBITS(20)                /* max bits for literal/length code */
-    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
-    {
-      DUMPBITS(t->bits)
-      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                "inflate:         * literal '%c'\n" :
-                "inflate:         * literal 0x%02x\n", t->base));
-      *q++ = (Byte)t->base;
-      m--;
-      continue;
-    }
-    do {
-      DUMPBITS(t->bits)
-      if (e & 16)
-      {
-        /* get extra bits for length */
-        e &= 15;
-        c = t->base + ((uInt)b & inflate_mask[e]);
-        DUMPBITS(e)
-        Tracevv((stderr, "inflate:         * length %u\n", c));
-
-        /* decode distance base of block to copy */
-        GRABBITS(15);           /* max bits for distance code */
-        e = (t = td + ((uInt)b & md))->exop;
-        do {
-          DUMPBITS(t->bits)
-          if (e & 16)
-          {
-            /* get extra bits to add to distance base */
-            e &= 15;
-            GRABBITS(e)         /* get extra bits (up to 13) */
-            d = t->base + ((uInt)b & inflate_mask[e]);
-            DUMPBITS(e)
-            Tracevv((stderr, "inflate:         * distance %u\n", d));
-
-            /* do the copy */
-            m -= c;
-            if ((uInt)(q - s->window) >= d)     /* offset before dest */
-            {                                   /*  just copy */
-              r = q - d;
-              *q++ = *r++;  c--;        /* minimum count is three, */
-              *q++ = *r++;  c--;        /*  so unroll loop a little */
-            }
-            else                        /* else offset after destination */
-            {
-              e = d - (uInt)(q - s->window); /* bytes from offset to end */
-              r = s->end - e;           /* pointer to offset */
-              if (c > e)                /* if source crosses, */
-              {
-                c -= e;                 /* copy to end of window */
-                do {
-                  *q++ = *r++;
-                } while (--e);
-                r = s->window;          /* copy rest from start of window */
-              }
-            }
-            do {                        /* copy all or what's left */
-              *q++ = *r++;
-            } while (--c);
-            break;
-          }
-          else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
-          else
-          {
-            z->msg = (char*)"invalid distance code";
-            UNGRAB
-            UPDATE
-            return Z_DATA_ERROR;
-          }
-        } while (1);
-        break;
-      }
-      if ((e & 64) == 0)
-      {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
-        {
-          DUMPBITS(t->bits)
-          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                    "inflate:         * literal '%c'\n" :
-                    "inflate:         * literal 0x%02x\n", t->base));
-          *q++ = (Byte)t->base;
-          m--;
-          break;
-        }
-      }
-      else if (e & 32)
-      {
-        Tracevv((stderr, "inflate:         * end of block\n"));
-        UNGRAB
-        UPDATE
-        return Z_STREAM_END;
-      }
-      else
-      {
-        z->msg = (char*)"invalid literal/length code";
-        UNGRAB
-        UPDATE
-        return Z_DATA_ERROR;
-      }
-    } while (1);
-  } while (m >= 258 && n >= 10);
-
-  /* not enough input or output--restore pointers and return */
-  UNGRAB
-  UPDATE
-  return Z_OK;
-}
-/* --- inffast.c */
-
-/* +++ zutil.c */
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zutil.c,v 1.17 1996/07/24 13:41:12 me Exp $ */
-
-#ifdef DEBUG_ZLIB
-#include <stdio.h>
-#endif
-
-/* #include "zutil.h" */
-
-#ifndef NO_DUMMY_DECL
-struct internal_state      {int dummy;}; /* for buggy compilers */
-#endif
-
-#ifndef STDC
-extern void exit OF((int));
-#endif
-
-const char *z_errmsg[10] = {
-"need dictionary",     /* Z_NEED_DICT       2  */
-"stream end",          /* Z_STREAM_END      1  */
-"",                    /* Z_OK              0  */
-"file error",          /* Z_ERRNO         (-1) */
-"stream error",        /* Z_STREAM_ERROR  (-2) */
-"data error",          /* Z_DATA_ERROR    (-3) */
-"insufficient memory", /* Z_MEM_ERROR     (-4) */
-"buffer error",        /* Z_BUF_ERROR     (-5) */
-"incompatible version",/* Z_VERSION_ERROR (-6) */
-""};
-
-
-const char *zlibVersion()
-{
-    return ZLIB_VERSION;
-}
-
-#ifdef DEBUG_ZLIB
-void z_error (m)
-    char *m;
-{
-    fprintf(stderr, "%s\n", m);
-    exit(1);
-}
-#endif
-
-#ifndef HAVE_MEMCPY
-
-void zmemcpy(dest, source, len)
-    Bytef* dest;
-    Bytef* source;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = *source++; /* ??? to be unrolled */
-    } while (--len != 0);
-}
-
-int zmemcmp(s1, s2, len)
-    Bytef* s1;
-    Bytef* s2;
-    uInt  len;
-{
-    uInt j;
-
-    for (j = 0; j < len; j++) {
-        if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1;
-    }
-    return 0;
-}
-
-void zmemzero(dest, len)
-    Bytef* dest;
-    uInt  len;
-{
-    if (len == 0) return;
-    do {
-        *dest++ = 0;  /* ??? to be unrolled */
-    } while (--len != 0);
-}
-#endif
-
-#ifdef __TURBOC__
-#if (defined( __BORLANDC__) || !defined(SMALL_MEDIUM)) && !defined(__32BIT__)
-/* Small and medium model in Turbo C are for now limited to near allocation
- * with reduced MAX_WBITS and MAX_MEM_LEVEL
- */
-#  define MY_ZCALLOC
-
-/* Turbo C malloc() does not allow dynamic allocation of 64K bytes
- * and farmalloc(64K) returns a pointer with an offset of 8, so we
- * must fix the pointer. Warning: the pointer must be put back to its
- * original form in order to free it, use zcfree().
- */
-
-#define MAX_PTR 10
-/* 10*64K = 640K */
-
-local int next_ptr = 0;
-
-typedef struct ptr_table_s {
-    voidpf org_ptr;
-    voidpf new_ptr;
-} ptr_table;
-
-local ptr_table table[MAX_PTR];
-/* This table is used to remember the original form of pointers
- * to large buffers (64K). Such pointers are normalized with a zero offset.
- * Since MSDOS is not a preemptive multitasking OS, this table is not
- * protected from concurrent access. This hack doesn't work anyway on
- * a protected system like OS/2. Use Microsoft C instead.
- */
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
-    voidpf buf = opaque; /* just to make some compilers happy */
-    ulg bsize = (ulg)items*size;
-
-    /* If we allocate less than 65520 bytes, we assume that farmalloc
-     * will return a usable pointer which doesn't have to be normalized.
-     */
-    if (bsize < 65520L) {
-        buf = farmalloc(bsize);
-        if (*(ush*)&buf != 0) return buf;
-    } else {
-        buf = farmalloc(bsize + 16L);
-    }
-    if (buf == NULL || next_ptr >= MAX_PTR) return NULL;
-    table[next_ptr].org_ptr = buf;
-
-    /* Normalize the pointer to seg:0 */
-    *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4;
-    *(ush*)&buf = 0;
-    table[next_ptr++].new_ptr = buf;
-    return buf;
-}
-
-void  zcfree (voidpf opaque, voidpf ptr)
-{
-    int n;
-    if (*(ush*)&ptr != 0) { /* object < 64K */
-        farfree(ptr);
-        return;
-    }
-    /* Find the original pointer */
-    for (n = 0; n < next_ptr; n++) {
-        if (ptr != table[n].new_ptr) continue;
-
-        farfree(table[n].org_ptr);
-        while (++n < next_ptr) {
-            table[n-1] = table[n];
-        }
-        next_ptr--;
-        return;
-    }
-    ptr = opaque; /* just to make some compilers happy */
-    Assert(0, "zcfree: ptr not found");
-}
-#endif
-#endif /* __TURBOC__ */
-
-
-#if defined(M_I86) && !defined(__32BIT__)
-/* Microsoft C in 16-bit mode */
-
-#  define MY_ZCALLOC
-
-#if (!defined(_MSC_VER) || (_MSC_VER < 600))
-#  define _halloc  halloc
-#  define _hfree   hfree
-#endif
-
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
-{
-    if (opaque) opaque = 0; /* to make compiler happy */
-    return _halloc((long)items, size);
-}
-
-void  zcfree (voidpf opaque, voidpf ptr)
-{
-    if (opaque) opaque = 0; /* to make compiler happy */
-    _hfree(ptr);
-}
-
-#endif /* MSC */
-
-
-#ifndef MY_ZCALLOC /* Any system without a special alloc function */
-
-#ifndef STDC
-extern voidp  calloc OF((uInt items, uInt size));
-extern void   free   OF((voidpf ptr));
-#endif
-
-voidpf zcalloc (opaque, items, size)
-    voidpf opaque;
-    unsigned items;
-    unsigned size;
-{
-    if (opaque) items += size - size; /* make compiler happy */
-    return (voidpf)calloc(items, size);
-}
-
-void  zcfree (opaque, ptr)
-    voidpf opaque;
-    voidpf ptr;
-{
-    free(ptr);
-    if (opaque) return; /* make compiler happy */
-}
-
-#endif /* MY_ZCALLOC */
-/* --- zutil.c */
-
-/* +++ adler32.c */
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-1996 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: adler32.c,v 1.10 1996/05/22 11:52:18 me Exp $ */
-
-/* #include "zlib.h" */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
-#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf)   DO8(buf,0); DO8(buf,8);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
-{
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
-
-    if (buf == Z_NULL) return 1L;
-
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-	    buf += 16;
-            k -= 16;
-        }
-        if (k != 0) do {
-            s1 += *buf++;
-	    s2 += s1;
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
-    }
-    return (s2 << 16) | s1;
-}
-/* --- adler32.c */
diff --git a/mdk-stage1/ppp/common/zlib.h b/mdk-stage1/ppp/common/zlib.h
deleted file mode 100644
index 188ddaff9..000000000
--- a/mdk-stage1/ppp/common/zlib.h
+++ /dev/null
@@ -1,1010 +0,0 @@
-/*	$Id$	*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-1.0.4
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/*
- *  ==FILEVERSION 971127==
- *
- * This marker is used by the Linux installation script to determine
- * whether an up-to-date version of this file is already installed.
- */
-
-
-/* +++ zlib.h */
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.0.4, Jul 24th, 1996.
-
-  Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
-
-
-  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
-*/
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* +++ zconf.h */
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.20 1996/07/02 15:09:28 me Exp $ */
-
-#ifndef _ZCONF_H
-#define _ZCONF_H
-
-/*
- * If you *really* need a unique prefix for all types and library functions,
- * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
- */
-#ifdef Z_PREFIX
-#  define deflateInit_	z_deflateInit_
-#  define deflate	z_deflate
-#  define deflateEnd	z_deflateEnd
-#  define inflateInit_ 	z_inflateInit_
-#  define inflate	z_inflate
-#  define inflateEnd	z_inflateEnd
-#  define deflateInit2_	z_deflateInit2_
-#  define deflateSetDictionary z_deflateSetDictionary
-#  define deflateCopy	z_deflateCopy
-#  define deflateReset	z_deflateReset
-#  define deflateParams	z_deflateParams
-#  define inflateInit2_	z_inflateInit2_
-#  define inflateSetDictionary z_inflateSetDictionary
-#  define inflateSync	z_inflateSync
-#  define inflateReset	z_inflateReset
-#  define compress	z_compress
-#  define uncompress	z_uncompress
-#  define adler32	z_adler32
-#  define crc32		z_crc32
-#  define get_crc_table z_get_crc_table
-
-#  define Byte		z_Byte
-#  define uInt		z_uInt
-#  define uLong		z_uLong
-#  define Bytef	        z_Bytef
-#  define charf		z_charf
-#  define intf		z_intf
-#  define uIntf		z_uIntf
-#  define uLongf	z_uLongf
-#  define voidpf	z_voidpf
-#  define voidp		z_voidp
-#endif
-
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-#  define WIN32
-#endif
-#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-#  ifndef __32BIT__
-#    define __32BIT__
-#  endif
-#endif
-#if defined(__MSDOS__) && !defined(MSDOS)
-#  define MSDOS
-#endif
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- */
-#if defined(MSDOS) && !defined(__32BIT__)
-#  define MAXSEG_64K
-#endif
-#ifdef MSDOS
-#  define UNALIGNED_OK
-#endif
-
-#if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
-#  define STDC
-#endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
-#  define STDC
-#endif
-
-#ifndef STDC
-#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-#    define const
-#  endif
-#endif
-
-/* Some Mac compilers merge all .h files incorrectly: */
-#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
-#  define NO_DUMMY_DECL
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-/* The following definitions for FAR are needed only for MSDOS mixed
- * model programming (small or medium model with some far allocations).
- * This was tested only with MSC; for other MSDOS compilers you may have
- * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
- * just define FAR to be empty.
- */
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
-   /* MSC small or medium model */
-#  define SMALL_MEDIUM
-#  ifdef _MSC_VER
-#    define FAR __far
-#  else
-#    define FAR far
-#  endif
-#endif
-#if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-#  ifndef __32BIT__
-#    define SMALL_MEDIUM
-#    define FAR __far
-#  endif
-#endif
-#ifndef FAR
-#   define FAR
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-#if defined(__BORLANDC__) && defined(SMALL_MEDIUM)
-   /* Borland C/C++ ignores FAR inside typedef */
-#  define Bytef Byte FAR
-#else
-   typedef Byte  FAR Bytef;
-#endif
-typedef char  FAR charf;
-typedef int   FAR intf;
-typedef uInt  FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-
-/* Compile with -DZLIB_DLL for Windows DLL support */
-#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
-#  include <windows.h>
-#  define EXPORT  WINAPI
-#else
-#  define EXPORT
-#endif
-
-#endif /* _ZCONF_H */
-/* --- zconf.h */
-
-#define ZLIB_VERSION "1.0.4P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidpf     opaque;  /* private data object passed to zalloc and zfree */
-
-    int     data_type;  /* best guess about the data type: ascii or binary */
-    uLong   adler;      /* adler32 value of the uncompressed data */
-    uLong   reserved;   /* reserved for future use */
-} z_stream;
-
-typedef z_stream FAR *z_streamp;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_PACKET_FLUSH	2
-#define Z_SYNC_FLUSH    3
-#define Z_FULL_FLUSH    4
-#define Z_FINISH        5
-/* Allowed flush values; see deflate() below for details */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_NEED_DICT     2
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define Z_NO_COMPRESSION         0
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-/* compression strategy; see deflateInit2() below for details */
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Possible values of the data_type field */
-
-#define Z_DEFLATED   8
-/* The deflate compression method (the only one supported in this version) */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-#define zlib_version zlibVersion()
-/* for compatibility with versions < 1.0.2 */
-
-                        /* basic functions */
-
-extern const char * EXPORT zlibVersion OF((void));
-/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
-   This check is automatically made by deflateInit and inflateInit.
- */
-
-/* 
-extern int EXPORT deflateInit OF((z_streamp strm, int level));
-
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at
-   all (the input data is simply copied a block at a time).
-   Z_DEFAULT_COMPRESSION requests a default compromise between speed and
-   compression (currently equivalent to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level,
-   Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
-*/
-
-
-extern int EXPORT deflate OF((z_streamp strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
-  and with zero avail_out, it must be called again after making room in the
-  output buffer because there might be more output pending.
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
-  block is terminated and flushed to the output buffer so that the
-  decompressor can get all input data available so far. For method 9, a future
-  variant on method 8, the current block will be flushed but not terminated.
-  Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
-  output is byte aligned (the compressor can clear its internal bit buffer)
-  and the current block is always terminated; this can be useful if the
-  compressor has to be restarted from scratch after an interruption (in which
-  case the internal state of the compressor may be lost).
-    If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
-  special marker is output and the compression dictionary is discarded; this
-  is useful to allow the decompressor to synchronize if one compressed block
-  has been damaged (see inflateSync below).  Flushing degrades compression and
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
-  seriously degrade the compression. If deflate returns with avail_out == 0,
-  this function must be called again with the same value of the flush
-  parameter and more output space (updated avail_out), until the flush is
-  complete (deflate returns with non-zero avail_out).
-
-    If the parameter flush is set to Z_PACKET_FLUSH, the compression
-  block is terminated, and a zero-length stored block is output,
-  omitting the length bytes (the effect of this is that the 3-bit type
-  code 000 for a stored block is output, and the output is then
-  byte-aligned).  This is designed for use at the end of a PPP packet.
-
-    If the parameter flush is set to Z_FINISH, pending input is processed,
-  pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
-  
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int EXPORT deflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent, Z_DATA_ERROR if the stream was freed
-   prematurely (some input or output was discarded). In the error case,
-   msg may be set but then points to a static string (which must not be
-   deallocated).
-*/
-
-
-/* 
-extern int EXPORT inflateInit OF((z_streamp strm));
-
-     Initializes the internal stream state for decompression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.  If
-   zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
-   allocation functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
-   with the version assumed by the caller.  msg is set to null if there is no
-   error message. inflateInit does not perform any decompression: this will be
-   done by inflate().
-*/
-
-
-extern int EXPORT inflate OF((z_streamp strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() provides as much output as possible, until there
-    is no more input data or no more space in the output buffer (see below
-    about the flush parameter).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
-  must be called again after making room in the output buffer because there
-  might be more output pending.
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
-  inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
-  Z_STREAM_ERROR if the stream structure was inconsistent (for example if
-  next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in
-  the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
-  application may then call inflateSync to look for a good compression block.
-  In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
-  dictionary chosen by the compressor.
-*/
-
-
-extern int EXPORT inflateEnd OF((z_streamp strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* Advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-/*   
-extern int EXPORT deflateInit2 OF((z_streamp strm,
-                                   int  level,
-                                   int  method,
-                                   int  windowBits,
-                                   int  memLevel,
-                                   int  strategy));
-
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The method parameter is the compression method. It must be Z_DEFLATED in
-   this version of the library. (Method 9 will allow a 64K history buffer and
-   partial block flushes.)
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
-   values of this parameter result in better compression at the expense of
-   memory usage. The default value is 15 if deflateInit is used instead.
-
-     The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm. Use the
-   value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
-   filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman encoding only (no
-   string match).  Filtered data consists mostly of small values with a
-   somewhat random distribution. In this case, the compression algorithm is
-   tuned to compress them better. The effect of Z_FILTERED is to force more
-   Huffman coding and less string matching; it is somewhat intermediate
-   between Z_DEFAULT and Z_HUFFMAN_ONLY. The strategy parameter only affects
-   the compression ratio but not the correctness of the compressed output even
-   if it is not set appropriately.
-
-     If next_in is not null, the library will use this buffer to hold also
-   some history information; the buffer must either hold the entire input
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
-   is null, the library will allocate its own history buffer (and leave next_in
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate(). 
-*/
-                            
-extern int EXPORT deflateSetDictionary OF((z_streamp strm,
-                                           const Bytef *dictionary,
-				           uInt  dictLength));
-/*
-     Initializes the compression dictionary (history buffer) from the given
-   byte sequence without producing any compressed output. This function must
-   be called immediately after deflateInit or deflateInit2, before any call
-   of deflate. The compressor and decompressor must use exactly the same
-   dictionary (see inflateSetDictionary).
-     The dictionary should consist of strings (byte sequences) that are likely
-   to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary. Using a
-   dictionary is most useful when the data to be compressed is short and
-   can be predicted with good accuracy; the data can then be compressed better
-   than with the default empty dictionary. In this version of the library,
-   only the last 32K bytes of the dictionary are used.
-     Upon return of this function, strm->adler is set to the Adler32 value
-   of the dictionary; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The Adler32 value
-   applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.)
-
-     deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state
-   is inconsistent (for example if deflate has already been called for this
-   stream). deflateSetDictionary does not perform any compression: this will
-   be done by deflate(). 
-*/
-
-extern int EXPORT deflateCopy OF((z_streamp dest,
-                                  z_streamp source));
-/*
-     Sets the destination stream as a complete copy of the source stream.  If
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
-
-     This function can be useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
-
-     deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
-   destination.
-*/
-
-extern int EXPORT deflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
-
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
-/*
-     Dynamically update the compression level and compression strategy.
-   This can be used to switch between compression and straight copy of
-   the input data, or to switch to a different kind of input data requiring
-   a different strategy. If the compression level is changed, the input
-   available so far is compressed with the old level (and may be flushed);
-   the new level will take effect only at the next call of deflate().
-
-     Before the call of deflateParams, the stream state must be set as for
-   a call of deflate(), since the currently available input may have to
-   be compressed and flushed. In particular, strm->avail_out must be non-zero.
-
-     deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
-   if strm->avail_out was zero.
-*/
-
-extern int EXPORT deflateOutputPending OF((z_streamp strm));
-/*
-     Returns the number of bytes of output which are immediately
-   available from the compressor (i.e. without any further input
-   or flush).
-*/
-
-/*   
-extern int EXPORT inflateInit2 OF((z_streamp strm,
-                                   int  windowBits));
-
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc, zfree and opaque must be initialized before by
-   the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int EXPORT inflateSetDictionary OF((z_streamp strm,
-				           const Bytef *dictionary,
-					   uInt  dictLength));
-/*
-     Initializes the decompression dictionary (history buffer) from the given
-   uncompressed byte sequence. This function must be called immediately after
-   a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
-   by the compressor can be determined from the Adler32 value returned by this
-   call of inflate. The compressor and decompressor must use exactly the same
-   dictionary (see deflateSetDictionary).
-
-     inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state is
-   inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
-   expected one (incorrect Adler32 value). inflateSetDictionary does not
-   perform any decompression: this will be done by subsequent calls of
-   inflate().
-*/
-
-extern int EXPORT inflateSync OF((z_streamp strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int EXPORT inflateReset OF((z_streamp strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* utility functions */
-
-/*
-     The following utility functions are implemented on top of the
-   basic stream-oriented functions. To simplify the interface, some
-   default options are assumed (compression level, window size,
-   standard memory allocation functions). The source code of these
-   utility functions can easily be modified if you need special options.
-*/
-
-extern int EXPORT compress OF((Bytef *dest,   uLongf *destLen,
-			       const Bytef *source, uLong sourceLen));
-/*
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
-   compressed buffer.
-     This function can be used to compress a whole file at once if the
-   input file is mmap'ed.
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer.
-*/
-
-extern int EXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
-				 const Bytef *source, uLong sourceLen));
-/*
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to decompress a whole file at once if the
-   input file is mmap'ed.
-
-     uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted.
-*/
-
-
-typedef voidp gzFile;
-
-extern gzFile EXPORT gzopen  OF((const char *path, const char *mode));
-/*
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9").  gzopen can be used to read a file which is not in gzip format;
-   in this case gzread will directly read from the file without decompression.
-     gzopen returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
-*/
-
-extern gzFile EXPORT gzdopen  OF((int fd, const char *mode));
-/*
-     gzdopen() associates a gzFile with the file descriptor fd.  File
-   descriptors are obtained from calls like open, dup, creat, pipe or
-   fileno (in the file has been previously opened with fopen).
-   The mode parameter is as in gzopen.
-     The next call of gzclose on the returned gzFile will also close the
-   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
-   descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
-     gzdopen returns NULL if there was insufficient memory to allocate
-   the (de)compression state.
-*/
-
-extern int EXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
-/*
-     Reads the given number of uncompressed bytes from the compressed file.
-   If the input file was not in gzip format, gzread copies the given number
-   of bytes into the buffer.
-     gzread returns the number of uncompressed bytes actually read (0 for
-   end of file, -1 for error). */
-
-extern int EXPORT    gzwrite OF((gzFile file, const voidp buf, unsigned len));
-/*
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of uncompressed bytes actually written
-   (0 in case of error).
-*/
-
-extern int EXPORT    gzflush OF((gzFile file, int flush));
-/*
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function. The return value is the zlib
-   error number (see function gzerror below). gzflush returns Z_OK if
-   the flush parameter is Z_FINISH and all output could be flushed.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
-*/
-
-extern int EXPORT    gzclose OF((gzFile file));
-/*
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state. The return value is the zlib
-   error number (see function gzerror below).
-*/
-
-extern const char * EXPORT gzerror OF((gzFile file, int *errnum));
-/*
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
-*/
-
-                        /* checksum functions */
-
-/*
-     These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the
-   compression library.
-*/
-
-extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-extern uLong EXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
-/*
-     Update a running crc with the bytes buf[0..len-1] and return the updated
-   crc. If buf is NULL, this function returns the required initial value
-   for the crc. Pre- and post-conditioning (one's complement) is performed
-   within this function so it shouldn't be done by the application.
-   Usage example:
-
-     uLong crc = crc32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       crc = crc32(crc, buffer, length);
-     }
-     if (crc != original_crc) error();
-*/
-
-
-                        /* various hacks, don't look :) */
-
-/* deflateInit and inflateInit are macros to allow checking the zlib version
- * and the compiler's view of z_stream:
- */
-extern int EXPORT deflateInit_ OF((z_streamp strm, int level,
-			           const char *version, int stream_size));
-extern int EXPORT inflateInit_ OF((z_streamp strm,
-				   const char *version, int stream_size));
-extern int EXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-				    int windowBits, int memLevel, int strategy,
-				    const char *version, int stream_size));
-extern int EXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
-				    const char *version, int stream_size));
-#define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
-#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
-        deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-		      (strategy),           ZLIB_VERSION, sizeof(z_stream))
-#define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
-
-#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* _ZLIB_H */
-/* --- zlib.h */
diff --git a/mdk-stage1/ppp/configure b/mdk-stage1/ppp/configure
deleted file mode 100755
index 544fb0d71..000000000
--- a/mdk-stage1/ppp/configure
+++ /dev/null
@@ -1,141 +0,0 @@
-#!/bin/sh
-# $Id$
-
-#  if [ -d /NextApps ]; then
-#    system="NeXTStep"
-#  else
-  system=`uname -s`
-  release=`uname -r`
-  machine=`uname -p`
-  arch=`uname -m`
-#  fi
-state="unknown"
-
-case $system in
-  Linux)
-    makext="linux";
-    ksrc="linux";
-    state="known";;
-  SunOS)
-    case $release in
-#      [0-3]*)	state="ancient";;
-#      4*)	state="known"; ksrc="sunos4"; makext="sunos4";;
-      5.[1-6]*)	state="known"; ksrc="solaris"; makext="sol2";;
-      5.[7-9]*)	state="known"; ksrc="solaris"; makext="sol2";
-              case $arch in
-		sun4u)	lp64='y';;
-		*)	;;
-	      esac;;
-    esac;;
-    NetBSD|FreeBSD|ULTRIX|OSF1|NeXTStep|SINIX-?|UNIX_SV|UNIX_System_V)
-      state="notincluded";;
-#    NetBSD)
-#      makext="bsd";
-#      case $release in
-#        0.*)	state="ancient";;
-#        1.0*)	state="ancient";;
-#        1.1*)	state="known"; ksrc="netbsd-1.1";;
-#        1.2*)	state="known"; ksrc="netbsd-1.2"; makext="netbsd-1.2";;
-#        1.[3-9]*|[2-9]*)
-#  		state="late"; ksrc="netbsd-1.2";;
-#      esac;;
-#    ULTRIX)
-#      makext="ultrix";
-#      case $release in
-#        [0-3]*)	state="ancient";;
-#        4.[01]*)	state="early"; ksrc="ultrix";;
-#        4.[234])	state="known"; ksrc="ultrix";;
-#      esac;;
-#    OSF1)
-#      makext="osf";
-#      case $release in
-#        V1.*)   state="neolithic"; ksrc="osf1";;
-#        V[23].*)	state="neolithic"; ksrc="osf1";;
-#        V4.*)	state="known"; ksrc="osf1";;
-#        V[5-9]*) state="late"; ksrc="osf1";;
-#      esac;;
-#    FreeBSD)
-#      makext="bsd";
-#      case $release in
-#        1.*)	state="known"; ksrc="freebsd-old";;
-#        2.[01]*)	state="known"; ksrc="freebsd-2.0";;
-#        2.2.[2-7]*) state="late"; ksrc="freebsd-2.0";;
-#        2.2.8*)   state="known"; ksrc="freebsd-2.2.8";;
-#        3.[0-1]*)	state="known"; ksrc="freebsd-3.0";;
-#      esac;;
-#    NeXTStep)
-#      makext="NeXT";
-#      ksrc="NeXT";
-#      state="known";;
-#    SINIX-?)
-#      case $release in
-#        5.4[01]) state=known; ksrc=svr4; makext=svr4;;
-#        5.4[2-9]) state=late; ksrc=svr4; makext=svr4;;
-#      esac;;
-#    # Intel SVR4 systems come with a bug in the uname program.  Unless
-#    # your provider fixed the bug, or you get a fix for it, uname -S will
-#    # overwrite the system name with the node name!
-#    UNIX_SV|UNIX_System_V|`uname -n`)
-#      case $release in
-#        4.0) state=known; ksrc=svr4; makext=svr4;;
-#        4.2) state=late; ksrc=svr4; makext=svr4;;
-#      esac;;
-esac
-
-if [ -d "$ksrc" ]; then :; else
-  state="notincluded"
-  unset ksrc
-fi
-
-case $state in
-  neolithic) 
-    echo "This is a newer release on an outdated OS ($system)."
-    echo " This software may or may not work on this OS."
-    echo " You may want to download an older version of PPP for this OS.";;
-  ancient)
-    echo "This is an old release of a supported OS ($system)."
-    echo "This software cannot be used as-is on this system,"
-    echo "but you may be able to port it.  Good luck!"
-    exit;;
-  early)
-    echo "This is an old release of a supported OS ($system)."
-    echo "This software should install and run on this system,"
-    echo "but it hasn't been tested.";;
-  late)
-    echo "This is a newer release of $system than is supported by"
-    echo "this software.  It may or may not work.";;
-  unknown)
-    echo "This software has not been ported to this system.  Sorry.";;
-  notincluded)
-    echo "Support for this system has not been included"
-    echo "in this distribution.  Sorry.";;
-esac
-
-orig_makext=$makext
-
-if [ -d "$ksrc" ]; then
-  echo "Creating links to Makefiles."
-  rm -f Makefile
-  ln -s $ksrc/Makefile.top Makefile
-  echo "  Makefile -> $ksrc/Makefile.top"
-  if [ "$ksrc" = solaris ]; then
-    # Point to 64-bit Makefile extension
-    if [ "$lp64" = y ]; then 
-      makext=$makext-64 
-    fi
-    rm -f $ksrc/Makefile
-    ln -s Makefile.$makext $ksrc/Makefile
-    echo "  $ksrc/Makefile -> Makefile.$makext"
-    # Restore extension
-    if [ "$lp64" = y ]; then 
-      makext=$orig_makext 
-    fi
-  fi
-  for dir in pppd pppstats chat pppdump; do
-    rm -f $dir/Makefile
-    if [ -f $dir/Makefile.$makext ]; then
-      ln -s Makefile.$makext $dir/Makefile
-      echo "  $dir/Makefile -> Makefile.$makext"
-    fi
-  done
-fi
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux b/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux
deleted file mode 100644
index 7eb217dac..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux
+++ /dev/null
@@ -1,16 +0,0 @@
-all: pppgetpass.vt pppgetpass.gtk
-
-pppgetpass.vt: pppgetpass.vt.o
-
-pppgetpass.gtk: pppgetpass.gtk.o
-	$(CC) $(LDFLAGS) pppgetpass.gtk.o `gtk-config --libs` -o pppgetpass.gtk
-pppgetpass.gtk.o: pppgetpass.gtk.c
-	$(CC) $(CFLAGS) -c pppgetpass.gtk.c `gtk-config --cflags`
-
-install: all
-	install -m 755 pppgetpass.sh /usr/bin/pppgetpass
-	install -m 4755 -o root -g root pppgetpass.vt /usr/bin/
-	install -m 755 -o root -g root pppgetpass.gtk /usr/X11/bin/
-
-clean:
-	rm -f *.o pppgetpass.gtk pppgetpass.vt core
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8 b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8
deleted file mode 100644
index ade576970..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8
+++ /dev/null
@@ -1,18 +0,0 @@
-.TH PPPGETPASS 8 "26 Sep 1999"
-.SH NAME
-pppgetpass \- prompt for PAP password
-.SH SYNOPSIS
-.B pppgetpass
-.I client server fd
-.SH DESCRIPTION
-.B pppgetpass
-the outer half of a plugin for PAP password prompting in pppd.
-If the peer requires PAP, and the
-.B passprompt.so
-plugin is loaded into pppd, it will run
-.B /usr/sbin/pppgetpass
-(or another program specified by the
-.B promptprog
-option) to prompt the user for the password.
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c
deleted file mode 100644
index 48ca04202..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c
+++ /dev/null
@@ -1,92 +0,0 @@
-#include <glib.h>
-#include <gdk/gdk.h>
-#include <gtk/gtkwindow.h>
-#include <gtk/gtkmain.h>
-#include <gtk/gtkbutton.h>
-#include <gtk/gtkvbox.h>
-#include <gtk/gtklabel.h>
-#include <gtk/gtkentry.h>
-#include <gtk/gtksignal.h>
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <syslog.h>
-
-int outfd;
-int err;
-
-static void okpressed(void *widget, void *clientdata)
-{
-  GtkWidget *answer=clientdata;
-  gchar *pass;
-  int passlen;
-  ssize_t wrote;
-  (void)widget;
-
-  pass=gtk_entry_get_text(GTK_ENTRY(answer));
-
-  passlen=strlen(pass);
-  if(!passlen)
-    return;
-
-  if((wrote=write(outfd, pass, passlen))!=passlen) {
-    if(wrote<0)
-      syslog(LOG_ERR, "write error on outpipe: %m");
-    else
-      syslog(LOG_ERR, "short write on outpipe");
-    err=1;
-  }
-  gtk_main_quit();
-}
-
-int main(int argc, char **argv)
-{
-  GtkWidget *mainwindow, *vbox, *question, *answer, *ok;
-  char buf[1024];
-  gtk_init(&argc, &argv);
-
-  openlog(argv[0], LOG_PID, LOG_DAEMON);
-  if(argc!=4) {
-    syslog(LOG_WARNING, "Usage error");
-    return 1;
-  }
-  outfd=atoi(argv[3]);
-  mainwindow=gtk_window_new(GTK_WINDOW_TOPLEVEL);
-  gtk_window_set_title(GTK_WINDOW(mainwindow), "pppgetpass");
-  gtk_signal_connect(GTK_OBJECT(mainwindow), "destroy",
-                     GTK_SIGNAL_FUNC(gtk_main_quit), 0);
-
-  vbox=gtk_vbox_new(FALSE, 5);
-  gtk_container_add(GTK_CONTAINER(mainwindow), vbox);
-  gtk_widget_show(vbox);
-
-  if(argv[1][0] && argv[2][0])
-    snprintf(buf, sizeof buf, "Password for PPP client %s on server %s: ", argv[1], argv[2]);
-  else if(argv[1][0] && !argv[2][0])
-    snprintf(buf, sizeof buf, "Password for PPP client %s: ", argv[1]);
-  else if(!argv[1][0] && argv[2][0])
-    snprintf(buf, sizeof buf, "Password for PPP on server %s: ", argv[2]);
-  else
-    snprintf(buf, sizeof buf, "Enter PPP password: ");
-  question=gtk_label_new(buf);
-  gtk_box_pack_start(GTK_BOX(vbox), question, FALSE, TRUE, 0);
-  gtk_widget_show(question);
-
-  answer=gtk_entry_new();
-  gtk_entry_set_visibility(GTK_ENTRY(answer), 0);
-  gtk_box_pack_start(GTK_BOX(vbox), answer, FALSE, TRUE, 0);
-  gtk_widget_show(answer);
-
-  ok=gtk_button_new_with_label("OK");
-  gtk_box_pack_start(GTK_BOX(vbox), ok, FALSE, TRUE, 0);
-  gtk_signal_connect(GTK_OBJECT(ok), "clicked",
-                     GTK_SIGNAL_FUNC(okpressed), answer);
-  gtk_widget_show(ok);
-
-  gtk_widget_show(mainwindow);
-  gtk_main();
-
-  return err;
-}
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh
deleted file mode 100644
index 09c480519..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-if [ -z "$DISPLAY" ]; then
-  exec pppgetpass.vt "$@"
-else
-  exec pppgetpass.gtk "$@"
-fi
diff --git a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c b/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c
deleted file mode 100644
index a1520883c..000000000
--- a/mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c
+++ /dev/null
@@ -1,218 +0,0 @@
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-#include <syslog.h>
-#include <termios.h>
-#include <sys/vt.h>
-
-static int console_owner(uid_t, int);
-
-int main(int argc, char **argv)
-{
-  int console;
-  uid_t uid;
-  struct vt_stat origstate;
-  int openvtnum;
-  char openvtname[256];
-  int openvt;
-  gid_t gid;
-  int chowned;
-  FILE *fp;
-  struct termios t;
-  char pass[256], *nl;
-  int outfd, passlen;
-  ssize_t wrote;
-  console=open("/dev/console", O_RDWR);
-
-  uid=getuid();
-  gid=getgid();
-  seteuid(uid);
-
-  openlog(argv[0], LOG_PID, LOG_DAEMON);
-
-  if(argc!=4) {
-    syslog(LOG_WARNING, "Usage error");
-    return 1;
-  }
-
-  if(console<0) {
-    syslog(LOG_ERR, "open(/dev/console): %m");
-    return 1;
-  }
-
-  if(ioctl(console, VT_GETSTATE, &origstate)<0) {
-    syslog(LOG_ERR, "VT_GETSTATE: %m");
-    return 1;
-  }
-
-  if(uid) {
-    if(!console_owner(uid, origstate.v_active)) {
-      int i;
-      for(i=0;i<64;++i) {
-        if(i!=origstate.v_active && console_owner(uid, i))
-          break;
-      }
-      if(i==64) {
-        syslog(LOG_WARNING, "run by uid %lu not at console", (unsigned long)uid);
-        return 1;
-      }
-    }
-  }
-
-  if(ioctl(console, VT_OPENQRY, &openvtnum)<0) {
-    syslog(LOG_ERR, "VT_OPENQRY: %m");
-    return 1;
-  }
-  if(openvtnum==-1) {
-    syslog(LOG_ERR, "No free VTs");
-    return 1;
-  }
-
-  snprintf(openvtname, sizeof openvtname, "/dev/tty%d", openvtnum);
-  seteuid(0);
-  openvt=open(openvtname, O_RDWR);
-  if(openvt<0) {
-    seteuid(uid);
-    syslog(LOG_ERR, "open(%s): %m", openvtname);
-    return 1;
-  }
-
-  chowned=fchown(openvt, uid, gid);
-  if(chowned<0) {
-    seteuid(uid);
-    syslog(LOG_ERR, "fchown(%s): %m", openvtname);
-    return 1;
-  }
-
-  close(console);
-
-  if(ioctl(openvt, VT_ACTIVATE, openvtnum)<0) {
-    seteuid(uid);
-    syslog(LOG_ERR, "VT_ACTIVATE(%d): %m", openvtnum);
-    return 1;
-  }
-
-  while(ioctl(openvt, VT_WAITACTIVE, openvtnum)<0) {
-    if(errno!=EINTR) {
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      syslog(LOG_ERR, "VT_WAITACTIVE(%d): %m", openvtnum);
-      return 1;
-    }
-  }
-
-  seteuid(uid);
-  fp=fdopen(openvt, "r+");
-  if(!fp) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    syslog(LOG_ERR, "fdopen(%s): %m", openvtname);
-    return 1;
-  }
-
-  if(tcgetattr(openvt, &t)<0) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    syslog(LOG_ERR, "tcgetattr(%s): %m", openvtname);
-    return 1;
-  }
-  t.c_lflag &= ~ECHO;
-  if(tcsetattr(openvt, TCSANOW, &t)<0) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    syslog(LOG_ERR, "tcsetattr(%s): %m", openvtname);
-    return 1;
-  }
-
-  if(fprintf(fp, "\033[2J\033[H")<0) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    syslog(LOG_ERR, "write error on %s: %m", openvtname);
-    return 1;
-  }
-  if(argv[1][0] && argv[2][0]) {
-    if(fprintf(fp, "Password for PPP client %s on server %s: ", argv[1], argv[2])<0) {
-      seteuid(0);
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      syslog(LOG_ERR, "write error on %s: %m", openvtname);
-      return 1;
-    }
-  } else if(argv[1][0] && !argv[2][0]) {
-    if(fprintf(fp, "Password for PPP client %s: ", argv[1])<0) {
-      syslog(LOG_ERR, "write error on %s: %m", openvtname);
-      seteuid(0);
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      return 1;
-    }
-  } else if(!argv[1][0] && argv[2][0]) {
-    if(fprintf(fp, "Password for PPP on server %s: ", argv[2])<0) {
-      seteuid(0);
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      syslog(LOG_ERR, "write error on %s: %m", openvtname);
-      return 1;
-    }
-  } else {
-    if(fprintf(fp, "Enter PPP password: ")<0) {
-      seteuid(0);
-      ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-      seteuid(uid);
-      syslog(LOG_ERR, "write error on %s: %m", openvtname);
-      return 1;
-    }
-  }
-
-  if(!fgets(pass, sizeof pass, fp)) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    if(ferror(fp)) {
-      syslog(LOG_ERR, "read error on %s: %m", openvtname);
-    }
-    return 1;
-  }
-  if((nl=strchr(pass, '\n'))) 
-    *nl=0;
-  passlen=strlen(pass);
-  
-  outfd=atoi(argv[3]);
-  if((wrote=write(outfd, pass, passlen))!=passlen) {
-    seteuid(0);
-    ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-    seteuid(uid);
-    if(wrote<0)
-      syslog(LOG_ERR, "write error on outpipe: %m");
-    else
-      syslog(LOG_ERR, "short write on outpipe");
-    return 1;
-  }
-
-  seteuid(0);
-  ioctl(openvt, VT_ACTIVATE, origstate.v_active);
-  seteuid(uid);
-  return 0;
-}
-
-static int console_owner(uid_t uid, int cons)
-{
-  char name[256];
-  struct stat st;
-  snprintf(name, sizeof name, "/dev/tty%d", cons);
-  if(stat(name, &st)<0) {
-    if(errno!=ENOENT)
-      syslog(LOG_ERR, "stat(%s): %m", name);
-    return 0;
-  }
-  return uid==st.st_uid;
-}
diff --git a/mdk-stage1/ppp/etc.ppp/chap-secrets b/mdk-stage1/ppp/etc.ppp/chap-secrets
deleted file mode 100644
index 7d1c3cd7c..000000000
--- a/mdk-stage1/ppp/etc.ppp/chap-secrets
+++ /dev/null
@@ -1,2 +0,0 @@
-# Secrets for authentication using CHAP
-# client	server	secret			IP addresses
diff --git a/mdk-stage1/ppp/etc.ppp/options b/mdk-stage1/ppp/etc.ppp/options
deleted file mode 100644
index 0f77a9aa0..000000000
--- a/mdk-stage1/ppp/etc.ppp/options
+++ /dev/null
@@ -1,5 +0,0 @@
-lock
-noauth
-noipdefault
-usepeerdns
-
diff --git a/mdk-stage1/ppp/etc.ppp/options.options b/mdk-stage1/ppp/etc.ppp/options.options
deleted file mode 100644
index 4b67b6a0d..000000000
--- a/mdk-stage1/ppp/etc.ppp/options.options
+++ /dev/null
@@ -1 +0,0 @@
-lock
diff --git a/mdk-stage1/ppp/etc.ppp/pap-secrets b/mdk-stage1/ppp/etc.ppp/pap-secrets
deleted file mode 100644
index f8b7dce3c..000000000
--- a/mdk-stage1/ppp/etc.ppp/pap-secrets
+++ /dev/null
@@ -1,2 +0,0 @@
-# Secrets for authentication using PAP
-# client	server	secret			IP addresses
diff --git a/mdk-stage1/ppp/include/linux/if_ppp.h b/mdk-stage1/ppp/include/linux/if_ppp.h
deleted file mode 100644
index 1febf0931..000000000
--- a/mdk-stage1/ppp/include/linux/if_ppp.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*	$Id$	*/
-
-/*
- * if_ppp.h - Point-to-Point Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-
-/*
- *  ==FILEVERSION 20000724==
- *
- *  NOTE TO MAINTAINERS:
- *     If you modify this file at all, please set the above date.
- *     if_ppp.h is shipped with a PPP distribution as well as with the kernel;
- *     if everyone increases the FILEVERSION number above, then scripts
- *     can do the right thing when deciding whether to install a new if_ppp.h
- *     file.  Don't change the format of that line otherwise, so the
- *     installation script can recognize it.
- */
-
-#ifndef _IF_PPP_H_
-#define _IF_PPP_H_
-
-/*
- * Packet sizes
- */
-
-#define	PPP_MTU		1500	/* Default MTU (size of Info field) */
-#define PPP_MAXMRU	65000	/* Largest MRU we allow */
-#define PROTO_IPX	0x002b	/* protocol numbers */
-#define PROTO_DNA_RT    0x0027  /* DNA Routing */
-
-
-/*
- * Bit definitions for flags.
- */
-
-#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
-#define SC_COMP_AC	0x00000002	/* header compression (output) */
-#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
-#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
-#define SC_ENABLE_IP	0x00000100	/* IP packets may be exchanged */
-#define SC_LOOP_TRAFFIC	0x00000200	/* send traffic to pppd */
-#define SC_MULTILINK	0x00000400	/* do multilink encapsulation */
-#define SC_MP_SHORTSEQ	0x00000800	/* use short MP sequence numbers */
-#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
-#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
-#define SC_MP_XSHORTSEQ	0x00004000	/* transmit short MP seq numbers */
-#define SC_DEBUG	0x00010000	/* enable debug messages */
-#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
-#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
-#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
-#define	SC_SYNC		0x00200000	/* synchronous serial mode */
-#define	SC_MASK		0x0f200fff	/* bits that user can change */
-
-/* state bits */
-#define SC_XMIT_BUSY	0x10000000	/* (used by isdn_ppp?) */
-#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
-#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
-#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
-#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
-#define SC_DC_FERROR	0x00800000	/* fatal decomp error detected */
-#define SC_DC_ERROR	0x00400000	/* non-fatal decomp error detected */
-
-/*
- * Ioctl definitions.
- */
-
-struct npioctl {
-	int		protocol;	/* PPP protocol, e.g. PPP_IP */
-	enum NPmode	mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
-	__u8	*ptr;
-	__u32	length;
-	int	transmit;
-};
-
-struct ifpppstatsreq {
-	struct ifreq	 b;
-	struct ppp_stats stats;			/* statistic information */
-};
-
-struct ifpppcstatsreq {
-	struct ifreq	      b;
-	struct ppp_comp_stats stats;
-};
-
-#define ifr__name       b.ifr_ifrn.ifrn_name
-#define stats_ptr       b.ifr_ifru.ifru_data
-
-/*
- * Ioctl definitions.
- */
-
-#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
-#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
-#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
-#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
-#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
-#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
-#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
-#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
-#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
-#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
-#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
-#define PPPIOCSPASS	_IOW('t', 71, struct sock_fprog) /* set pass filter */
-#define PPPIOCSACTIVE	_IOW('t', 70, struct sock_fprog) /* set active filt */
-#define PPPIOCGDEBUG	_IOR('t', 65, int)	/* Read debug level */
-#define PPPIOCSDEBUG	_IOW('t', 64, int)	/* Set debug level */
-#define PPPIOCGIDLE	_IOR('t', 63, struct ppp_idle) /* get idle time */
-#define PPPIOCNEWUNIT	_IOWR('t', 62, int)	/* create new ppp unit */
-#define PPPIOCATTACH	_IOW('t', 61, int)	/* attach to ppp unit */
-#define PPPIOCDETACH	_IOW('t', 60, int)	/* detach from ppp unit/chan */
-#define PPPIOCSMRRU	_IOW('t', 59, int)	/* set multilink MRU */
-#define PPPIOCCONNECT	_IOW('t', 58, int)	/* connect channel to unit */
-#define PPPIOCDISCONN	_IO('t', 57)		/* disconnect channel */
-#define PPPIOCATTCHAN	_IOW('t', 56, int)	/* attach to ppp channel */
-#define PPPIOCGCHAN	_IOR('t', 55, int)	/* get ppp channel number */
-
-#define SIOCGPPPSTATS   (SIOCDEVPRIVATE + 0)
-#define SIOCGPPPVER     (SIOCDEVPRIVATE + 1)	/* NEVER change this!! */
-#define SIOCGPPPCSTATS  (SIOCDEVPRIVATE + 2)
-
-#if !defined(ifr_mtu)
-#define ifr_mtu	ifr_ifru.ifru_metric
-#endif
-
-#endif /* _IF_PPP_H_ */
diff --git a/mdk-stage1/ppp/include/linux/if_pppvar.h b/mdk-stage1/ppp/include/linux/if_pppvar.h
deleted file mode 100644
index b2485cd9d..000000000
--- a/mdk-stage1/ppp/include/linux/if_pppvar.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*	From: if_pppvar.h,v 1.2 1995/06/12 11:36:51 paulus Exp */
-/*
- * if_pppvar.h - private structures and declarations for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
- *  ==FILEVERSION 990911==
- *
- *  NOTE TO MAINTAINERS:
- *   If you modify this file at all, please set the above date.
- *   if_pppvar.h is shipped with a PPP distribution as well as with the kernel;
- *   if everyone increases the FILEVERSION number above, then scripts
- *   can do the right thing when deciding whether to install a new if_pppvar.h
- *   file.  Don't change the format of that line otherwise, so the
- *   installation script can recognize it.
- */
-
-/*
- * Supported network protocols.  These values are used for
- * indexing sc_npmode.
- */
-
-#define NP_IP	0		/* Internet Protocol */
-#define NP_IPX	1		/* IPX protocol */
-#define NP_AT	2		/* Appletalk protocol */
-#define NP_IPV6	3		/* Internet Protocol */
-#define NUM_NP	4		/* Number of NPs. */
-
-#define OBUFSIZE	256	/* # chars of output buffering */
-
-/*
- * Structure describing each ppp unit.
- */
-
-struct ppp {
-	int		magic;		/* magic value for structure	*/
-	struct ppp	*next;		/* unit with next index		*/
-	unsigned long	inuse;		/* are we allocated?		*/
-	int		line;		/* network interface unit #	*/
-	__u32		flags;		/* miscellaneous control flags	*/
-	int		mtu;		/* maximum xmit frame size	*/
-	int		mru;		/* maximum receive frame size	*/
-	struct slcompress *slcomp;	/* for TCP header compression	*/
-	struct sk_buff_head xmt_q;	/* frames to send from pppd	*/
-	struct sk_buff_head rcv_q;	/* frames for pppd to read	*/
-	unsigned long	xmit_busy;	/* bit 0 set when xmitter busy  */
-
-	/* Information specific to using ppp on async serial lines. */
-	struct tty_struct *tty;		/* ptr to TTY structure	*/
-	struct tty_struct *backup_tty;	/* TTY to use if tty gets closed */
-	__u8		escape;		/* 0x20 if prev char was PPP_ESC */
-	__u8		toss;		/* toss this frame		*/
-	volatile __u8	tty_pushing;	/* internal state flag		*/
-	volatile __u8	woke_up;	/* internal state flag		*/
-	__u32		xmit_async_map[8]; /* 1 bit means that given control 
-					   character is quoted on output*/
-	__u32		recv_async_map; /* 1 bit means that given control 
-					   character is ignored on input*/
-	__u32		bytes_sent;	/* Bytes sent on frame	*/
-	__u32		bytes_rcvd;	/* Bytes recvd on frame	*/
-
-	/* Async transmission information */
-	struct sk_buff	*tpkt;		/* frame currently being sent	*/
-	int		tpkt_pos;	/* how much of it we've done	*/
-	__u16		tfcs;		/* FCS so far for it		*/
-	unsigned char	*optr;		/* where we're up to in sending */
-	unsigned char	*olim;		/* points past last valid char	*/
-
-	/* Async reception information */
-	struct sk_buff	*rpkt;		/* frame currently being rcvd	*/
-	__u16		rfcs;		/* FCS so far of rpkt		*/
-
-	/* Queues for select() functionality */
-	struct wait_queue *read_wait;	/* queue for reading processes	*/
-
-	/* info for detecting idle channels */
-	unsigned long	last_xmit;	/* time of last transmission	*/
-	unsigned long	last_recv;	/* time last packet received    */
-
-	/* Statistic information */
-	struct pppstat	stats;		/* statistic information	*/
-
-	/* PPP compression protocol information */
-	struct	compressor *sc_xcomp;	/* transmit compressor */
-	void	*sc_xc_state;		/* transmit compressor state */
-	struct	compressor *sc_rcomp;	/* receive decompressor */
-	void	*sc_rc_state;		/* receive decompressor state */
-
-	enum	NPmode sc_npmode[NUM_NP]; /* what to do with each NP */
-	int	 sc_xfer;		/* PID of reserved PPP table */
-	char	name[8];		/* space for unit name */
-	struct device	dev;		/* net device structure */
-	struct enet_statistics estats;	/* more detailed stats */
-
-	/* tty output buffer */
-	unsigned char	obuf[OBUFSIZE];	/* buffer for characters to send */
-};
-
-#define PPP_MAGIC	0x5002
-#define PPP_VERSION	"2.3.11"
diff --git a/mdk-stage1/ppp/include/linux/ppp-comp.h b/mdk-stage1/ppp/include/linux/ppp-comp.h
deleted file mode 100644
index 3184d0731..000000000
--- a/mdk-stage1/ppp/include/linux/ppp-comp.h
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- *  ==FILEVERSION 980319==
- *
- *  NOTE TO MAINTAINERS:
- *     If you modify this file at all, please set the above date.
- *     ppp-comp.h is shipped with a PPP distribution as well as with the kernel;
- *     if everyone increases the FILEVERSION number above, then scripts
- *     can do the right thing when deciding whether to install a new ppp-comp.h
- *     file.  Don't change the format of that line otherwise, so the
- *     installation script can recognize it.
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE	1	/* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1	0
-#define DO_PREDICTOR_2	0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-
-struct compressor {
-	int	compress_proto;	/* CCP compression protocol number */
-
-	/* Allocate space for a compressor (transmit side) */
-	void	*(*comp_alloc) (unsigned char *options, int opt_len);
-
-	/* Free space used by a compressor */
-	void	(*comp_free) (void *state);
-
-	/* Initialize a compressor */
-	int	(*comp_init) (void *state, unsigned char *options,
-			      int opt_len, int unit, int opthdr, int debug);
-
-	/* Reset a compressor */
-	void	(*comp_reset) (void *state);
-
-	/* Compress a packet */
-	int     (*compress) (void *state, unsigned char *rptr,
-			      unsigned char *obuf, int isize, int osize);
-
-	/* Return compression statistics */
-	void	(*comp_stat) (void *state, struct compstat *stats);
-
-	/* Allocate space for a decompressor (receive side) */
-	void	*(*decomp_alloc) (unsigned char *options, int opt_len);
-
-	/* Free space used by a decompressor */
-	void	(*decomp_free) (void *state);
-
-	/* Initialize a decompressor */
-	int	(*decomp_init) (void *state, unsigned char *options,
-				int opt_len, int unit, int opthdr, int mru,
-				int debug);
-
-	/* Reset a decompressor */
-	void	(*decomp_reset) (void *state);
-
-	/* Decompress a packet. */
-	int	(*decompress) (void *state, unsigned char *ibuf, int isize,
-				unsigned char *obuf, int osize);
-
-	/* Update state for an incompressible packet received */
-	void	(*incomp) (void *state, unsigned char *ibuf, int icnt);
-
-	/* Return decompression statistics */
-	void	(*decomp_stat) (void *state, struct compstat *stats);
-};
-
-/*
- * The return value from decompress routine is the length of the
- * decompressed packet if successful, otherwise DECOMP_ERROR
- * or DECOMP_FATALERROR if an error occurred.
- * 
- * We need to make this distinction so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression.  This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-
-#define DECOMP_ERROR		-1	/* error detected before decomp. */
-#define DECOMP_FATALERROR	-2	/* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	8
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - DEFLATE_MIN_SIZE) << 4) \
-				 + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#ifdef __KERNEL__
-extern int ppp_register_compressor(struct compressor *);
-extern void ppp_unregister_compressor(struct compressor *);
-#endif /* __KERNEL__ */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/include/linux/ppp_defs.h b/mdk-stage1/ppp/include/linux/ppp_defs.h
deleted file mode 100644
index 46946fbdc..000000000
--- a/mdk-stage1/ppp/include/linux/ppp_defs.h
+++ /dev/null
@@ -1,185 +0,0 @@
-/*	$Id$	*/
-
-/*
- * ppp_defs.h - PPP definitions.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-/*
- *  ==FILEVERSION 20000114==
- *
- *  NOTE TO MAINTAINERS:
- *     If you modify this file at all, please set the above date.
- *     ppp_defs.h is shipped with a PPP distribution as well as with the kernel;
- *     if everyone increases the FILEVERSION number above, then scripts
- *     can do the right thing when deciding whether to install a new ppp_defs.h
- *     file.  Don't change the format of that line otherwise, so the
- *     installation script can recognize it.
- */
-
-#ifndef _PPP_DEFS_H_
-#define _PPP_DEFS_H_
-
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-
-#define PPP_ADDRESS(p)	(((__u8 *)(p))[0])
-#define PPP_CONTROL(p)	(((__u8 *)(p))[1])
-#define PPP_PROTOCOL(p)	((((__u8 *)(p))[2] << 8) + ((__u8 *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX protocol */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_MP		0x3d	/* Multilink protocol */
-#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
-#define PPP_COMPFRAG	0xfb	/* fragment compressed below bundle */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-#define PPP_CCPFRAG	0x80fb	/* CCP at link level (below MP bundle) */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-#define PPP_FCS(fcs, c)	(((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-
-typedef __u32		ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics for LQRP and pppstats
- */
-struct pppstat	{
-    __u32	ppp_discards;	/* # frames discarded */
-
-    __u32	ppp_ibytes;	/* bytes received */
-    __u32	ppp_ioctects;	/* bytes received not in error */
-    __u32	ppp_ipackets;	/* packets received */
-    __u32	ppp_ierrors;	/* receive errors */
-    __u32	ppp_ilqrs;	/* # LQR frames received */
-
-    __u32	ppp_obytes;	/* raw bytes sent */
-    __u32	ppp_ooctects;	/* frame bytes sent */
-    __u32	ppp_opackets;	/* packets sent */
-    __u32	ppp_oerrors;	/* transmit errors */ 
-    __u32	ppp_olqrs;	/* # LQR frames sent */
-};
-
-struct vjstat {
-    __u32	vjs_packets;	/* outbound packets */
-    __u32	vjs_compressed;	/* outbound compressed packets */
-    __u32	vjs_searches;	/* searches for connection state */
-    __u32	vjs_misses;	/* times couldn't find conn. state */
-    __u32	vjs_uncompressedin; /* inbound uncompressed packets */
-    __u32	vjs_compressedin;   /* inbound compressed packets */
-    __u32	vjs_errorin;	/* inbound unknown type packets */
-    __u32	vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct compstat {
-    __u32	unc_bytes;	/* total uncompressed bytes */
-    __u32	unc_packets;	/* total uncompressed packets */
-    __u32	comp_bytes;	/* compressed bytes */
-    __u32	comp_packets;	/* compressed packets */
-    __u32	inc_bytes;	/* incompressible bytes */
-    __u32	inc_packets;	/* incompressible packets */
-
-    /* the compression ratio is defined as in_count / bytes_out */
-    __u32       in_count;	/* Bytes received */
-    __u32       bytes_out;	/* Bytes transmitted */
-
-    double	ratio;		/* not computed in kernel. */
-};
-
-struct ppp_stats {
-    struct pppstat	p;	/* basic PPP statistics */
-    struct vjstat	vj;	/* VJ header compression statistics */
-};
-
-struct ppp_comp_stats {
-    struct compstat	c;	/* packet compression statistics */
-    struct compstat	d;	/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    time_t xmit_idle;		/* time since last NP packet sent */
-    time_t recv_idle;		/* time since last NP packet received */
-};
-
-#ifndef __P
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-#endif
-
-#endif /* _PPP_DEFS_H_ */
diff --git a/mdk-stage1/ppp/include/net/if_ppp.h b/mdk-stage1/ppp/include/net/if_ppp.h
deleted file mode 100644
index 1527ecf3f..000000000
--- a/mdk-stage1/ppp/include/net/if_ppp.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*	$Id$	*/
-
-/*
- * if_ppp.h - Point-to-Point Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _IF_PPP_H_
-#define _IF_PPP_H_
-
-/*
- * Bit definitions for flags.
- */
-#define SC_COMP_PROT	0x00000001	/* protocol compression (output) */
-#define SC_COMP_AC	0x00000002	/* header compression (output) */
-#define	SC_COMP_TCP	0x00000004	/* TCP (VJ) compression (output) */
-#define SC_NO_TCP_CCID	0x00000008	/* disable VJ connection-id comp. */
-#define SC_REJ_COMP_AC	0x00000010	/* reject adrs/ctrl comp. on input */
-#define SC_REJ_COMP_TCP	0x00000020	/* reject TCP (VJ) comp. on input */
-#define SC_CCP_OPEN	0x00000040	/* Look at CCP packets */
-#define SC_CCP_UP	0x00000080	/* May send/recv compressed packets */
-#define SC_DEBUG	0x00010000	/* enable debug messages */
-#define SC_LOG_INPKT	0x00020000	/* log contents of good pkts recvd */
-#define SC_LOG_OUTPKT	0x00040000	/* log contents of pkts sent */
-#define SC_LOG_RAWIN	0x00080000	/* log all chars received */
-#define SC_LOG_FLUSH	0x00100000	/* log all chars flushed */
-#define SC_RCV_B7_0	0x01000000	/* have rcvd char with bit 7 = 0 */
-#define SC_RCV_B7_1	0x02000000	/* have rcvd char with bit 7 = 1 */
-#define SC_RCV_EVNP	0x04000000	/* have rcvd char with even parity */
-#define SC_RCV_ODDP	0x08000000	/* have rcvd char with odd parity */
-#define SC_SYNC		0x00200000	/* use synchronous HDLC framing */
-#define	SC_MASK		0x0fff00ff	/* bits that user can change */
-
-/*
- * State bits in sc_flags, not changeable by user.
- */
-#define SC_TIMEOUT	0x00000400	/* timeout is currently pending */
-#define SC_VJ_RESET	0x00000800	/* need to reset VJ decomp */
-#define SC_COMP_RUN	0x00001000	/* compressor has been inited */
-#define SC_DECOMP_RUN	0x00002000	/* decompressor has been inited */
-#define SC_DC_ERROR	0x00004000	/* non-fatal decomp error detected */
-#define SC_DC_FERROR	0x00008000	/* fatal decomp error detected */
-#define SC_TBUSY	0x10000000	/* xmitter doesn't need a packet yet */
-#define SC_PKTLOST	0x20000000	/* have lost or dropped a packet */
-#define	SC_FLUSH	0x40000000	/* flush input until next PPP_FLAG */
-#define	SC_ESCAPED	0x80000000	/* saw a PPP_ESCAPE */
-
-/*
- * Ioctl definitions.
- */
-
-struct npioctl {
-    int		protocol;	/* PPP procotol, e.g. PPP_IP */
-    enum NPmode	mode;
-};
-
-/* Structure describing a CCP configuration option, for PPPIOCSCOMPRESS */
-struct ppp_option_data {
-	u_char	*ptr;
-	u_int	length;
-	int	transmit;
-};
-
-struct ifpppstatsreq {
-    char ifr_name[IFNAMSIZ];
-    struct ppp_stats stats;
-};
-
-struct ifpppcstatsreq {
-    char ifr_name[IFNAMSIZ];
-    struct ppp_comp_stats stats;
-};
-
-/*
- * Ioctl definitions.
- */
-
-#define	PPPIOCGFLAGS	_IOR('t', 90, int)	/* get configuration flags */
-#define	PPPIOCSFLAGS	_IOW('t', 89, int)	/* set configuration flags */
-#define	PPPIOCGASYNCMAP	_IOR('t', 88, int)	/* get async map */
-#define	PPPIOCSASYNCMAP	_IOW('t', 87, int)	/* set async map */
-#define	PPPIOCGUNIT	_IOR('t', 86, int)	/* get ppp unit number */
-#define	PPPIOCGRASYNCMAP _IOR('t', 85, int)	/* get receive async map */
-#define	PPPIOCSRASYNCMAP _IOW('t', 84, int)	/* set receive async map */
-#define	PPPIOCGMRU	_IOR('t', 83, int)	/* get max receive unit */
-#define	PPPIOCSMRU	_IOW('t', 82, int)	/* set max receive unit */
-#define	PPPIOCSMAXCID	_IOW('t', 81, int)	/* set VJ max slot ID */
-#define PPPIOCGXASYNCMAP _IOR('t', 80, ext_accm) /* get extended ACCM */
-#define PPPIOCSXASYNCMAP _IOW('t', 79, ext_accm) /* set extended ACCM */
-#define PPPIOCXFERUNIT	_IO('t', 78)		/* transfer PPP unit */
-#define PPPIOCSCOMPRESS	_IOW('t', 77, struct ppp_option_data)
-#define PPPIOCGNPMODE	_IOWR('t', 76, struct npioctl) /* get NP mode */
-#define PPPIOCSNPMODE	_IOW('t', 75, struct npioctl)  /* set NP mode */
-#define PPPIOCGIDLE	_IOR('t', 74, struct ppp_idle) /* get idle time */
-#ifdef PPP_FILTER
-#define PPPIOCSPASS	_IOW('t', 71, struct bpf_program) /* set pass filter */
-#define PPPIOCSACTIVE	_IOW('t', 70, struct bpf_program) /* set active filt */
-#endif /* PPP_FILTER */
-
-/* PPPIOC[GS]MTU are alternatives to SIOC[GS]IFMTU, used under Ultrix */
-#define PPPIOCGMTU	_IOR('t', 73, int)	/* get interface MTU */
-#define PPPIOCSMTU	_IOW('t', 72, int)	/* set interface MTU */
-
-/*
- * These two are interface ioctls so that pppstats can do them on
- * a socket without having to open the serial device.
- */
-#define SIOCGPPPSTATS	_IOWR('i', 123, struct ifpppstatsreq)
-#define SIOCGPPPCSTATS	_IOWR('i', 122, struct ifpppcstatsreq)
-
-#if !defined(ifr_mtu)
-#define ifr_mtu	ifr_ifru.ifru_metric
-#endif
-
-#if (defined(_KERNEL) || defined(KERNEL)) && !defined(NeXT)
-void pppattach __P((void));
-void pppintr __P((void));
-#endif
-#endif /* _IF_PPP_H_ */
diff --git a/mdk-stage1/ppp/include/net/ppp-comp.h b/mdk-stage1/ppp/include/net/ppp-comp.h
deleted file mode 100644
index 0e6a9c672..000000000
--- a/mdk-stage1/ppp/include/net/ppp-comp.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE	1	/* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1	0
-#define DO_PREDICTOR_2	0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-#ifdef PACKETPTR
-struct compressor {
-	int	compress_proto;	/* CCP compression protocol number */
-
-	/* Allocate space for a compressor (transmit side) */
-	void	*(*comp_alloc) __P((u_char *options, int opt_len));
-	/* Free space used by a compressor */
-	void	(*comp_free) __P((void *state));
-	/* Initialize a compressor */
-	int	(*comp_init) __P((void *state, u_char *options, int opt_len,
-				  int unit, int hdrlen, int debug));
-	/* Reset a compressor */
-	void	(*comp_reset) __P((void *state));
-	/* Compress a packet */
-	int	(*compress) __P((void *state, PACKETPTR *mret,
-				 PACKETPTR mp, int orig_len, int max_len));
-	/* Return compression statistics */
-	void	(*comp_stat) __P((void *state, struct compstat *stats));
-
-	/* Allocate space for a decompressor (receive side) */
-	void	*(*decomp_alloc) __P((u_char *options, int opt_len));
-	/* Free space used by a decompressor */
-	void	(*decomp_free) __P((void *state));
-	/* Initialize a decompressor */
-	int	(*decomp_init) __P((void *state, u_char *options, int opt_len,
-				    int unit, int hdrlen, int mru, int debug));
-	/* Reset a decompressor */
-	void	(*decomp_reset) __P((void *state));
-	/* Decompress a packet. */
-	int	(*decompress) __P((void *state, PACKETPTR mp,
-				   PACKETPTR *dmpp));
-	/* Update state for an incompressible packet received */
-	void	(*incomp) __P((void *state, PACKETPTR mp));
-	/* Return decompression statistics */
-	void	(*decomp_stat) __P((void *state, struct compstat *stats));
-};
-#endif /* PACKETPTR */
-
-/*
- * Return values for decompress routine.
- * We need to make these distinctions so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression.  This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-#define DECOMP_OK		0	/* everything went OK */
-#define DECOMP_ERROR		1	/* error detected before decomp. */
-#define DECOMP_FATALERROR	2	/* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	8
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - DEFLATE_MIN_SIZE) << 4) \
-				 + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/include/net/ppp_defs.h b/mdk-stage1/ppp/include/net/ppp_defs.h
deleted file mode 100644
index 46bef52bb..000000000
--- a/mdk-stage1/ppp/include/net/ppp_defs.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*	$Id$	*/
-
-/*
- * ppp_defs.h - PPP definitions.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#ifndef _PPP_DEFS_H_
-#define _PPP_DEFS_H_
-
-/*
- * The basic PPP frame.
- */
-#define PPP_HDRLEN	4	/* octets for standard ppp header */
-#define PPP_FCSLEN	2	/* octets for FCS */
-
-/*
- * Packet sizes
- *
- * Note - lcp shouldn't be allowed to negotiate stuff outside these
- *	  limits.  See lcp.h in the pppd directory.
- * (XXX - these constants should simply be shared by lcp.c instead
- *	  of living in lcp.h)
- */
-#define	PPP_MTU		1500	/* Default MTU (size of Info field) */
-#define PPP_MAXMTU	65535 - (PPP_HDRLEN + PPP_FCSLEN)
-#define PPP_MINMTU	64
-#define PPP_MRU		1500	/* default MRU = max length of info field */
-#define PPP_MAXMRU	65000	/* Largest MRU we allow */
-#define PPP_MINMRU	128
-
-#define PPP_ADDRESS(p)	(((u_char *)(p))[0])
-#define PPP_CONTROL(p)	(((u_char *)(p))[1])
-#define PPP_PROTOCOL(p)	((((u_char *)(p))[2] << 8) + ((u_char *)(p))[3])
-
-/*
- * Significant octet values.
- */
-#define	PPP_ALLSTATIONS	0xff	/* All-Stations broadcast address */
-#define	PPP_UI		0x03	/* Unnumbered Information */
-#define	PPP_FLAG	0x7e	/* Flag Sequence */
-#define	PPP_ESCAPE	0x7d	/* Asynchronous Control Escape */
-#define	PPP_TRANS	0x20	/* Asynchronous transparency modifier */
-
-/*
- * Protocol field values.
- */
-#define PPP_IP		0x21	/* Internet Protocol */
-#define PPP_AT		0x29	/* AppleTalk Protocol */
-#define PPP_IPX		0x2b	/* IPX protocol */
-#define	PPP_VJC_COMP	0x2d	/* VJ compressed TCP */
-#define	PPP_VJC_UNCOMP	0x2f	/* VJ uncompressed TCP */
-#define PPP_IPV6	0x57	/* Internet Protocol Version 6 */
-#define PPP_COMP	0xfd	/* compressed packet */
-#define PPP_IPCP	0x8021	/* IP Control Protocol */
-#define PPP_ATCP	0x8029	/* AppleTalk Control Protocol */
-#define PPP_IPXCP	0x802b	/* IPX Control Protocol */
-#define PPP_IPV6CP	0x8057	/* IPv6 Control Protocol */
-#define PPP_CCP		0x80fd	/* Compression Control Protocol */
-#define PPP_LCP		0xc021	/* Link Control Protocol */
-#define PPP_PAP		0xc023	/* Password Authentication Protocol */
-#define PPP_LQR		0xc025	/* Link Quality Report protocol */
-#define PPP_CHAP	0xc223	/* Cryptographic Handshake Auth. Protocol */
-#define PPP_CBCP	0xc029	/* Callback Control Protocol */
-
-/*
- * Values for FCS calculations.
- */
-#define PPP_INITFCS	0xffff	/* Initial FCS value */
-#define PPP_GOODFCS	0xf0b8	/* Good final FCS value */
-#define PPP_FCS(fcs, c)	(((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-/*
- * A 32-bit unsigned integral type.
- */
-
-#if !defined(__BIT_TYPES_DEFINED__) && !defined(_BITYPES) \
- && !defined(__FreeBSD__) && (NS_TARGET < 40) && !defined(__dietlibc__)
-#ifdef	UINT32_T
-typedef UINT32_T	u_int32_t;
-#else
-typedef unsigned int	u_int32_t;
-typedef unsigned short  u_int16_t;
-#endif
-#endif
-
-/*
- * Extended asyncmap - allows any character to be escaped.
- */
-typedef u_int32_t	ext_accm[8];
-
-/*
- * What to do with network protocol (NP) packets.
- */
-enum NPmode {
-    NPMODE_PASS,		/* pass the packet through */
-    NPMODE_DROP,		/* silently drop the packet */
-    NPMODE_ERROR,		/* return an error */
-    NPMODE_QUEUE		/* save it up for later. */
-};
-
-/*
- * Statistics.
- */
-struct pppstat	{
-    unsigned int ppp_ibytes;	/* bytes received */
-    unsigned int ppp_ipackets;	/* packets received */
-    unsigned int ppp_ierrors;	/* receive errors */
-    unsigned int ppp_obytes;	/* bytes sent */
-    unsigned int ppp_opackets;	/* packets sent */
-    unsigned int ppp_oerrors;	/* transmit errors */
-};
-
-struct vjstat {
-    unsigned int vjs_packets;	/* outbound packets */
-    unsigned int vjs_compressed; /* outbound compressed packets */
-    unsigned int vjs_searches;	/* searches for connection state */
-    unsigned int vjs_misses;	/* times couldn't find conn. state */
-    unsigned int vjs_uncompressedin; /* inbound uncompressed packets */
-    unsigned int vjs_compressedin; /* inbound compressed packets */
-    unsigned int vjs_errorin;	/* inbound unknown type packets */
-    unsigned int vjs_tossed;	/* inbound packets tossed because of error */
-};
-
-struct ppp_stats {
-    struct pppstat p;		/* basic PPP statistics */
-    struct vjstat vj;		/* VJ header compression statistics */
-};
-
-struct compstat {
-    unsigned int unc_bytes;	/* total uncompressed bytes */
-    unsigned int unc_packets;	/* total uncompressed packets */
-    unsigned int comp_bytes;	/* compressed bytes */
-    unsigned int comp_packets;	/* compressed packets */
-    unsigned int inc_bytes;	/* incompressible bytes */
-    unsigned int inc_packets;	/* incompressible packets */
-    unsigned int ratio;		/* recent compression ratio << 8 */
-};
-
-struct ppp_comp_stats {
-    struct compstat c;		/* packet compression statistics */
-    struct compstat d;		/* packet decompression statistics */
-};
-
-/*
- * The following structure records the time in seconds since
- * the last NP packet was sent or received.
- */
-struct ppp_idle {
-    time_t xmit_idle;		/* time since last NP packet sent */
-    time_t recv_idle;		/* time since last NP packet received */
-};
-
-#ifndef __P
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-#endif
-
-#endif /* _PPP_DEFS_H_ */
diff --git a/mdk-stage1/ppp/include/net/pppio.h b/mdk-stage1/ppp/include/net/pppio.h
deleted file mode 100644
index 9db1ca9ab..000000000
--- a/mdk-stage1/ppp/include/net/pppio.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * pppio.h - ioctl and other misc. definitions for STREAMS modules.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#define _PPPIO(n)	(('p' << 8) + (n))
-
-#define PPPIO_NEWPPA	_PPPIO(130)	/* allocate a new PPP unit */
-#define PPPIO_GETSTAT	_PPPIO(131)	/* get PPP statistics */
-#define PPPIO_GETCSTAT	_PPPIO(132)	/* get PPP compression stats */
-#define PPPIO_MTU	_PPPIO(133)	/* set max transmission unit */
-#define PPPIO_MRU	_PPPIO(134)	/* set max receive unit */
-#define PPPIO_CFLAGS	_PPPIO(135)	/* set/clear/get compression flags */
-#define PPPIO_XCOMP	_PPPIO(136)	/* alloc transmit compressor */
-#define PPPIO_RCOMP	_PPPIO(137)	/* alloc receive decompressor */
-#define PPPIO_XACCM	_PPPIO(138)	/* set transmit asyncmap */
-#define PPPIO_RACCM	_PPPIO(139)	/* set receive asyncmap */
-#define PPPIO_VJINIT	_PPPIO(140)	/* initialize VJ comp/decomp */
-#define PPPIO_ATTACH	_PPPIO(141)	/* attach to a ppa (without putmsg) */
-#define PPPIO_LASTMOD	_PPPIO(142)	/* mark last ppp module */
-#define PPPIO_GCLEAN	_PPPIO(143)	/* get 8-bit-clean flags */
-#define PPPIO_DEBUG	_PPPIO(144)	/* request debug information */
-#define PPPIO_BIND	_PPPIO(145)	/* bind to SAP */
-#define PPPIO_NPMODE	_PPPIO(146)	/* set mode for handling data pkts */
-#define PPPIO_GIDLE	_PPPIO(147)	/* get time since last data pkt */
-#define PPPIO_PASSFILT	_PPPIO(148)	/* set filter for packets to pass */
-#define PPPIO_ACTIVEFILT _PPPIO(149)	/* set filter for "link active" pkts */
-
-/*
- * Values for PPPIO_CFLAGS
- */
-#define COMP_AC		0x1		/* compress address/control */
-#define DECOMP_AC	0x2		/* decompress address/control */
-#define COMP_PROT	0x4		/* compress PPP protocol */
-#define DECOMP_PROT	0x8		/* decompress PPP protocol */
-
-#define COMP_VJC	0x10		/* compress TCP/IP headers */
-#define COMP_VJCCID	0x20		/* compress connection ID as well */
-#define DECOMP_VJC	0x40		/* decompress TCP/IP headers */
-#define DECOMP_VJCCID	0x80		/* accept compressed connection ID */
-
-#define CCP_ISOPEN	0x100		/* look at CCP packets */
-#define CCP_ISUP	0x200		/* do packet comp/decomp */
-#define CCP_ERROR	0x400		/* (status) error in packet decomp */
-#define CCP_FATALERROR	0x800		/* (status) fatal error ditto */
-#define CCP_COMP_RUN	0x1000		/* (status) seen CCP ack sent */
-#define CCP_DECOMP_RUN	0x2000		/* (status) seen CCP ack rcvd */
-
-/*
- * Values for 8-bit-clean flags.
- */
-#define RCV_B7_0	1		/* have rcvd char with bit 7 = 0 */
-#define RCV_B7_1	2		/* have rcvd char with bit 7 = 1 */
-#define RCV_EVNP	4		/* have rcvd char with even parity */
-#define RCV_ODDP	8		/* have rcvd char with odd parity */
-
-/*
- * Values for the first byte of M_CTL messages passed between
- * PPP modules.
- */
-#define PPPCTL_OERROR	0xe0		/* output error [up] */
-#define PPPCTL_IERROR	0xe1		/* input error (e.g. FCS) [up] */
-#define PPPCTL_MTU	0xe2		/* set MTU [down] */
-#define PPPCTL_MRU	0xe3		/* set MRU [down] */
-#define PPPCTL_UNIT	0xe4		/* note PPP unit number [down] */
-
-/*
- * Values for the integer argument to PPPIO_DEBUG.
- */
-#define PPPDBG_DUMP	0x10000		/* print out debug info now */
-#define PPPDBG_LOG	0x100		/* log various things */
-#define PPPDBG_DRIVER	0		/* identifies ppp driver as target */
-#define PPPDBG_IF	1		/* identifies ppp network i/f target */
-#define PPPDBG_COMP	2		/* identifies ppp compression target */
-#define PPPDBG_AHDLC	3		/* identifies ppp async hdlc target */
diff --git a/mdk-stage1/ppp/include/net/slcompress.h b/mdk-stage1/ppp/include/net/slcompress.h
deleted file mode 100644
index 9e19bc0ed..000000000
--- a/mdk-stage1/ppp/include/net/slcompress.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Definitions for tcp compression routines.
- *
- * $Id$
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- *	- Initial distribution.
- */
-
-#ifndef _SLCOMPRESS_H_
-#define _SLCOMPRESS_H_
-
-#define MAX_STATES 16		/* must be > 2 and < 256 */
-#define MAX_HDR MLEN		/* XXX 4bsd-ism: should really be 128 */
-
-/*
- * Compressed packet format:
- *
- * The first octet contains the packet type (top 3 bits), TCP
- * 'push' bit, and flags that indicate which of the 4 TCP sequence
- * numbers have changed (bottom 5 bits).  The next octet is a
- * conversation number that associates a saved IP/TCP header with
- * the compressed packet.  The next two octets are the TCP checksum
- * from the original datagram.  The next 0 to 15 octets are
- * sequence number changes, one change per bit set in the header
- * (there may be no changes and there are two special cases where
- * the receiver implicitly knows what changed -- see below).
- * 
- * There are 5 numbers which can change (they are always inserted
- * in the following order): TCP urgent pointer, window,
- * acknowlegement, sequence number and IP ID.  (The urgent pointer
- * is different from the others in that its value is sent, not the
- * change in value.)  Since typical use of SLIP links is biased
- * toward small packets (see comments on MTU/MSS below), changes
- * use a variable length coding with one octet for numbers in the
- * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
- * range 256 - 65535 or 0.  (If the change in sequence number or
- * ack is more than 65535, an uncompressed packet is sent.)
- */
-
-/*
- * Packet types (must not conflict with IP protocol version)
- *
- * The top nibble of the first octet is the packet type.  There are
- * three possible types: IP (not proto TCP or tcp with one of the
- * control flags set); uncompressed TCP (a normal IP/TCP packet but
- * with the 8-bit protocol field replaced by an 8-bit connection id --
- * this type of packet syncs the sender & receiver); and compressed
- * TCP (described above).
- *
- * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
- * is logically part of the 4-bit "changes" field that follows.  Top
- * three bits are actual packet type.  For backward compatibility
- * and in the interest of conserving bits, numbers are chosen so the
- * IP protocol version number (4) which normally appears in this nibble
- * means "IP packet".
- */
-
-/* packet types */
-#define TYPE_IP 0x40
-#define TYPE_UNCOMPRESSED_TCP 0x70
-#define TYPE_COMPRESSED_TCP 0x80
-#define TYPE_ERROR 0x00
-
-/* Bits in first octet of compressed packet */
-#define NEW_C	0x40	/* flag bits for what changed in a packet */
-#define NEW_I	0x20
-#define NEW_S	0x08
-#define NEW_A	0x04
-#define NEW_W	0x02
-#define NEW_U	0x01
-
-/* reserved, special-case values of above */
-#define SPECIAL_I (NEW_S|NEW_W|NEW_U)		/* echoed interactive traffic */
-#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U)	/* unidirectional data */
-#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
-
-#define TCP_PUSH_BIT 0x10
-
-
-/*
- * "state" data for each active tcp conversation on the wire.  This is
- * basically a copy of the entire IP/TCP header from the last packet
- * we saw from the conversation together with a small identifier
- * the transmit & receive ends of the line use to locate saved header.
- */
-struct cstate {
-	struct cstate *cs_next;	/* next most recently used cstate (xmit only) */
-	u_short cs_hlen;	/* size of hdr (receive only) */
-	u_char cs_id;		/* connection # associated with this state */
-	u_char cs_filler;
-	union {
-		char csu_hdr[MAX_HDR];
-		struct ip csu_ip;	/* ip/tcp hdr from most recent packet */
-	} slcs_u;
-};
-#define cs_ip slcs_u.csu_ip
-#define cs_hdr slcs_u.csu_hdr
-
-/*
- * all the state data for one serial line (we need one of these
- * per line).
- */
-struct slcompress {
-	struct cstate *last_cs;	/* most recently used tstate */
-	u_char last_recv;	/* last rcvd conn. id */
-	u_char last_xmit;	/* last sent conn. id */
-	u_short flags;
-#ifndef SL_NO_STATS
-	int sls_packets;	/* outbound packets */
-	int sls_compressed;	/* outbound compressed packets */
-	int sls_searches;	/* searches for connection state */
-	int sls_misses;		/* times couldn't find conn. state */
-	int sls_uncompressedin;	/* inbound uncompressed packets */
-	int sls_compressedin;	/* inbound compressed packets */
-	int sls_errorin;	/* inbound unknown type packets */
-	int sls_tossed;		/* inbound packets tossed because of error */
-#endif
-	struct cstate tstate[MAX_STATES];	/* xmit connection states */
-	struct cstate rstate[MAX_STATES];	/* receive connection states */
-};
-/* flag values */
-#define SLF_TOSS 1		/* tossing rcvd frames because of input err */
-
-void	sl_compress_init __P((struct slcompress *));
-void	sl_compress_setup __P((struct slcompress *, int));
-u_int	sl_compress_tcp __P((struct mbuf *,
-	    struct ip *, struct slcompress *, int));
-int	sl_uncompress_tcp __P((u_char **, int, u_int, struct slcompress *));
-int	sl_uncompress_tcp_core __P((u_char *, int, int, u_int,
-	    struct slcompress *, u_char **, u_int *));
-
-#endif /* _SLCOMPRESS_H_ */
diff --git a/mdk-stage1/ppp/include/net/vjcompress.h b/mdk-stage1/ppp/include/net/vjcompress.h
deleted file mode 100644
index c64596926..000000000
--- a/mdk-stage1/ppp/include/net/vjcompress.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Definitions for tcp compression routines.
- *
- * $Id$
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- *	- Initial distribution.
- */
-
-#ifndef _VJCOMPRESS_H_
-#define _VJCOMPRESS_H_
-
-#define MAX_STATES 16		/* must be > 2 and < 256 */
-#define MAX_HDR	   128
-
-/*
- * Compressed packet format:
- *
- * The first octet contains the packet type (top 3 bits), TCP
- * 'push' bit, and flags that indicate which of the 4 TCP sequence
- * numbers have changed (bottom 5 bits).  The next octet is a
- * conversation number that associates a saved IP/TCP header with
- * the compressed packet.  The next two octets are the TCP checksum
- * from the original datagram.  The next 0 to 15 octets are
- * sequence number changes, one change per bit set in the header
- * (there may be no changes and there are two special cases where
- * the receiver implicitly knows what changed -- see below).
- * 
- * There are 5 numbers which can change (they are always inserted
- * in the following order): TCP urgent pointer, window,
- * acknowlegement, sequence number and IP ID.  (The urgent pointer
- * is different from the others in that its value is sent, not the
- * change in value.)  Since typical use of SLIP links is biased
- * toward small packets (see comments on MTU/MSS below), changes
- * use a variable length coding with one octet for numbers in the
- * range 1 - 255 and 3 octets (0, MSB, LSB) for numbers in the
- * range 256 - 65535 or 0.  (If the change in sequence number or
- * ack is more than 65535, an uncompressed packet is sent.)
- */
-
-/*
- * Packet types (must not conflict with IP protocol version)
- *
- * The top nibble of the first octet is the packet type.  There are
- * three possible types: IP (not proto TCP or tcp with one of the
- * control flags set); uncompressed TCP (a normal IP/TCP packet but
- * with the 8-bit protocol field replaced by an 8-bit connection id --
- * this type of packet syncs the sender & receiver); and compressed
- * TCP (described above).
- *
- * LSB of 4-bit field is TCP "PUSH" bit (a worthless anachronism) and
- * is logically part of the 4-bit "changes" field that follows.  Top
- * three bits are actual packet type.  For backward compatibility
- * and in the interest of conserving bits, numbers are chosen so the
- * IP protocol version number (4) which normally appears in this nibble
- * means "IP packet".
- */
-
-/* packet types */
-#define TYPE_IP 0x40
-#define TYPE_UNCOMPRESSED_TCP 0x70
-#define TYPE_COMPRESSED_TCP 0x80
-#define TYPE_ERROR 0x00
-
-/* Bits in first octet of compressed packet */
-#define NEW_C	0x40	/* flag bits for what changed in a packet */
-#define NEW_I	0x20
-#define NEW_S	0x08
-#define NEW_A	0x04
-#define NEW_W	0x02
-#define NEW_U	0x01
-
-/* reserved, special-case values of above */
-#define SPECIAL_I (NEW_S|NEW_W|NEW_U)		/* echoed interactive traffic */
-#define SPECIAL_D (NEW_S|NEW_A|NEW_W|NEW_U)	/* unidirectional data */
-#define SPECIALS_MASK (NEW_S|NEW_A|NEW_W|NEW_U)
-
-#define TCP_PUSH_BIT 0x10
-
-
-/*
- * "state" data for each active tcp conversation on the wire.  This is
- * basically a copy of the entire IP/TCP header from the last packet
- * we saw from the conversation together with a small identifier
- * the transmit & receive ends of the line use to locate saved header.
- */
-struct cstate {
-    struct cstate *cs_next;	/* next most recently used state (xmit only) */
-    u_short cs_hlen;		/* size of hdr (receive only) */
-    u_char cs_id;		/* connection # associated with this state */
-    u_char cs_filler;
-    union {
-	char csu_hdr[MAX_HDR];
-	struct ip csu_ip;	/* ip/tcp hdr from most recent packet */
-    } vjcs_u;
-};
-#define cs_ip vjcs_u.csu_ip
-#define cs_hdr vjcs_u.csu_hdr
-
-/*
- * all the state data for one serial line (we need one of these per line).
- */
-struct vjcompress {
-    struct cstate *last_cs;	/* most recently used tstate */
-    u_char last_recv;		/* last rcvd conn. id */
-    u_char last_xmit;		/* last sent conn. id */
-    u_short flags;
-#ifndef VJ_NO_STATS
-    struct vjstat stats;
-#endif
-    struct cstate tstate[MAX_STATES];	/* xmit connection states */
-    struct cstate rstate[MAX_STATES];	/* receive connection states */
-};
-
-/* flag values */
-#define VJF_TOSS 1		/* tossing rcvd frames because of input err */
-
-extern void  vj_compress_init __P((struct vjcompress *comp, int max_state));
-extern u_int vj_compress_tcp __P((struct ip *ip, u_int mlen,
-				struct vjcompress *comp, int compress_cid_flag,
-				u_char **vjhdrp));
-extern void  vj_uncompress_err __P((struct vjcompress *comp));
-extern int   vj_uncompress_uncomp __P((u_char *buf, int buflen,
-				struct vjcompress *comp));
-extern int   vj_uncompress_tcp __P((u_char *buf, int buflen, int total_len,
-				struct vjcompress *comp, u_char **hdrp,
-				u_int *hlenp));
-
-#endif /* _VJCOMPRESS_H_ */
diff --git a/mdk-stage1/ppp/include/pcap-int.h b/mdk-stage1/ppp/include/pcap-int.h
deleted file mode 100644
index 323994929..000000000
--- a/mdk-stage1/ppp/include/pcap-int.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (c) 1994, 1995, 1996
- *	The Regents of the University of California.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the Computer Systems
- *	Engineering Group at Lawrence Berkeley Laboratory.
- * 4. Neither the name of the University nor of the Laboratory may be used
- *    to endorse or promote products derived from this software without
- *    specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @(#) $Header$ (LBL)
- */
-
-#ifndef pcap_int_h
-#define pcap_int_h
-
-#include <pcap.h>
-
-/*
- * Savefile
- */
-struct pcap_sf {
-	FILE *rfile;
-	int swapped;
-	int version_major;
-	int version_minor;
-	u_char *base;
-};
-
-struct pcap_md {
-	struct pcap_stat stat;
-	/*XXX*/
-	int use_bpf;
-	u_long	TotPkts;	/* can't oflow for 79 hrs on ether */
-	u_long	TotAccepted;	/* count accepted by filter */
-	u_long	TotDrops;	/* count of dropped packets */
-	long	TotMissed;	/* missed by i/f during this run */
-	long	OrigMissed;	/* missed by i/f before this run */
-#ifdef linux
-	int pad;
-	int skip;
-	char *device;
-#endif
-};
-
-struct pcap {
-	int fd;
-	int snapshot;
-	int linktype;
-	int tzoff;		/* timezone offset */
-	int offset;		/* offset for proper alignment */
-
-	struct pcap_sf sf;
-	struct pcap_md md;
-
-	/*
-	 * Read buffer.
-	 */
-	int bufsize;
-	u_char *buffer;
-	u_char *bp;
-	int cc;
-
-	/*
-	 * Place holder for pcap_next().
-	 */
-	u_char *pkt;
-
-	
-	/*
-	 * Placeholder for filter code if bpf not in kernel.
-	 */
-	struct bpf_program fcode;
-
-	char errbuf[PCAP_ERRBUF_SIZE];
-};
-
-int	yylex(void);
-
-#ifndef min
-#define min(a, b) ((a) > (b) ? (b) : (a))
-#endif
-
-/* XXX should these be in pcap.h? */
-int	pcap_offline_read(pcap_t *, int, pcap_handler, u_char *);
-int	pcap_read(pcap_t *, int cnt, pcap_handler, u_char *);
-
-/* Ultrix pads to make everything line up on a nice boundary */
-#if defined(ultrix) || defined(__alpha)
-#define       PCAP_FDDIPAD 3
-#endif
-
-/* XXX */
-extern	int pcap_fddipad;
-#endif
diff --git a/mdk-stage1/ppp/linux/Makefile.top b/mdk-stage1/ppp/linux/Makefile.top
deleted file mode 100644
index fa34ce59f..000000000
--- a/mdk-stage1/ppp/linux/Makefile.top
+++ /dev/null
@@ -1,55 +0,0 @@
-# PPP top-level Makefile for Linux.
-
-
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-ETCDIR = $(DESTDIR)/etc/ppp
-
-# uid 0 = root
-INSTALL= install
-
-all:
-	cd chat; $(MAKE) $(MFLAGS) all
-	cd pppd; $(MAKE) $(MFLAGS) all
-	cd pppstats; $(MAKE) $(MFLAGS) all
-	cd pppdump; $(MAKE) $(MFLAGS) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
-	cd chat; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-	cd pppd; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-	cd pppstats; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-	cd pppdump; $(MAKE) BINDIR=$(BINDIR) MANDIR=$(MANDIR) $(MFLAGS) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-	$(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
-	$(INSTALL) -c -m 644 etc.ppp/options $@
-$(ETCDIR)/pap-secrets:
-	$(INSTALL) -c -m 600 etc.ppp/pap-secrets $@
-$(ETCDIR)/chap-secrets:
-	$(INSTALL) -c -m 600 etc.ppp/chap-secrets $@
-
-$(BINDIR):
-	$(INSTALL) -d -m 755 $@
-$(MANDIR)/man8:
-	$(INSTALL) -d -m 755 $@
-$(ETCDIR):
-	$(INSTALL) -d -m 755 $@
-
-clean:
-	rm -f `find . -name '*.[oas]' -print`
-	rm -f `find . -name 'core' -print`
-	rm -f `find . -name '*~' -print`
-	cd chat; $(MAKE) clean
-	cd pppd; $(MAKE) clean
-	cd pppstats; $(MAKE) clean
-	cd pppdump; $(MAKE) clean
-
-dist-clean:	clean
-	rm -f Makefile `find . -name Makefile -print`
-
-#kernel:
-#	cd linux; ./kinstall.sh
diff --git a/mdk-stage1/ppp/modules/bsd-comp.c b/mdk-stage1/ppp/modules/bsd-comp.c
deleted file mode 100644
index b1b9325c7..000000000
--- a/mdk-stage1/ppp/modules/bsd-comp.c
+++ /dev/null
@@ -1,1116 +0,0 @@
-/* Because this code is derived from the 4.3BSD compress source:
- *
- *
- * Copyright (c) 1985, 1986 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * James A. Woods, derived from original work by Spencer Thomas
- * and Joseph Orost.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * This version is for use with STREAMS under SunOS 4.x,
- * Digital UNIX, AIX 4.x, and SVR4 systems including Solaris 2.
- *
- * $Id$
- */
-
-#ifdef AIX4
-#include <net/net_globals.h>
-#endif
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/stream.h>
-#include <net/ppp_defs.h>
-#include "ppp_mod.h"
-
-#ifdef SVR4
-#include <sys/byteorder.h>
-#ifndef _BIG_ENDIAN
-#define BSD_LITTLE_ENDIAN
-#endif
-#endif
-
-#ifdef __osf__
-#undef FIRST
-#undef LAST
-#define BSD_LITTLE_ENDIAN
-#endif
-
-#define PACKETPTR	mblk_t *
-#include <net/ppp-comp.h>
-
-#if DO_BSD_COMPRESS
-
-/*
- * PPP "BSD compress" compression
- *  The differences between this compression and the classic BSD LZW
- *  source are obvious from the requirement that the classic code worked
- *  with files while this handles arbitrarily long streams that
- *  are broken into packets.  They are:
- *
- *	When the code size expands, a block of junk is not emitted by
- *	    the compressor and not expected by the decompressor.
- *
- *	New codes are not necessarily assigned every time an old
- *	    code is output by the compressor.  This is because a packet
- *	    end forces a code to be emitted, but does not imply that a
- *	    new sequence has been seen.
- *
- *	The compression ratio is checked at the first end of a packet
- *	    after the appropriate gap.	Besides simplifying and speeding
- *	    things up, this makes it more likely that the transmitter
- *	    and receiver will agree when the dictionary is cleared when
- *	    compression is not going well.
- */
-
-/*
- * A dictionary for doing BSD compress.
- */
-struct bsd_db {
-    int	    totlen;			/* length of this structure */
-    u_int   hsize;			/* size of the hash table */
-    u_char  hshift;			/* used in hash function */
-    u_char  n_bits;			/* current bits/code */
-    u_char  maxbits;
-    u_char  debug;
-    u_char  unit;
-    u_short seqno;			/* sequence number of next packet */
-    u_int   hdrlen;			/* header length to preallocate */
-    u_int   mru;
-    u_int   maxmaxcode;			/* largest valid code */
-    u_int   max_ent;			/* largest code in use */
-    u_int   in_count;			/* uncompressed bytes, aged */
-    u_int   bytes_out;			/* compressed bytes, aged */
-    u_int   ratio;			/* recent compression ratio */
-    u_int   checkpoint;			/* when to next check the ratio */
-    u_int   clear_count;		/* times dictionary cleared */
-    u_int   incomp_count;		/* incompressible packets */
-    u_int   incomp_bytes;		/* incompressible bytes */
-    u_int   uncomp_count;		/* uncompressed packets */
-    u_int   uncomp_bytes;		/* uncompressed bytes */
-    u_int   comp_count;			/* compressed packets */
-    u_int   comp_bytes;			/* compressed bytes */
-    u_short *lens;			/* array of lengths of codes */
-    struct bsd_dict {
-	union {				/* hash value */
-	    u_int32_t	fcode;
-	    struct {
-#ifdef BSD_LITTLE_ENDIAN
-		u_short prefix;		/* preceding code */
-		u_char	suffix;		/* last character of new code */
-		u_char	pad;
-#else
-		u_char	pad;
-		u_char	suffix;		/* last character of new code */
-		u_short prefix;		/* preceding code */
-#endif
-	    } hs;
-	} f;
-	u_short codem1;			/* output of hash table -1 */
-	u_short cptr;			/* map code to hash table entry */
-    } dict[1];
-};
-
-#define BSD_OVHD	2		/* BSD compress overhead/packet */
-#define BSD_INIT_BITS	BSD_MIN_BITS
-
-static void	*bsd_comp_alloc __P((u_char *options, int opt_len));
-static void	*bsd_decomp_alloc __P((u_char *options, int opt_len));
-static void	bsd_free __P((void *state));
-static int	bsd_comp_init __P((void *state, u_char *options, int opt_len,
-				   int unit, int hdrlen, int debug));
-static int	bsd_decomp_init __P((void *state, u_char *options, int opt_len,
-				     int unit, int hdrlen, int mru, int debug));
-static int	bsd_compress __P((void *state, mblk_t **mret,
-				  mblk_t *mp, int slen, int maxolen));
-static void	bsd_incomp __P((void *state, mblk_t *dmsg));
-static int	bsd_decompress __P((void *state, mblk_t *cmp, mblk_t **dmpp));
-static void	bsd_reset __P((void *state));
-static void	bsd_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to ppp_comp.c.
- */
-struct compressor ppp_bsd_compress = {
-    CI_BSD_COMPRESS,		/* compress_proto */
-    bsd_comp_alloc,		/* comp_alloc */
-    bsd_free,			/* comp_free */
-    bsd_comp_init,		/* comp_init */
-    bsd_reset,			/* comp_reset */
-    bsd_compress,		/* compress */
-    bsd_comp_stats,		/* comp_stat */
-    bsd_decomp_alloc,		/* decomp_alloc */
-    bsd_free,			/* decomp_free */
-    bsd_decomp_init,		/* decomp_init */
-    bsd_reset,			/* decomp_reset */
-    bsd_decompress,		/* decompress */
-    bsd_incomp,			/* incomp */
-    bsd_comp_stats,		/* decomp_stat */
-};
-
-/*
- * the next two codes should not be changed lightly, as they must not
- * lie within the contiguous general code space.
- */
-#define CLEAR	256			/* table clear output code */
-#define FIRST	257			/* first free entry */
-#define LAST	255
-
-#define MAXCODE(b)	((1 << (b)) - 1)
-#define BADCODEM1	MAXCODE(BSD_MAX_BITS)
-
-#define BSD_HASH(prefix,suffix,hshift)	((((u_int32_t)(suffix)) << (hshift)) \
-					 ^ (u_int32_t)(prefix))
-#define BSD_KEY(prefix,suffix)		((((u_int32_t)(suffix)) << 16) \
-					 + (u_int32_t)(prefix))
-
-#define CHECK_GAP	10000		/* Ratio check interval */
-
-#define RATIO_SCALE_LOG	8
-#define RATIO_SCALE	(1<<RATIO_SCALE_LOG)
-#define RATIO_MAX	(0x7fffffff>>RATIO_SCALE_LOG)
-
-#define DECOMP_CHUNK	256
-
-/*
- * clear the dictionary
- */
-static void
-bsd_clear(db)
-    struct bsd_db *db;
-{
-    db->clear_count++;
-    db->max_ent = FIRST-1;
-    db->n_bits = BSD_INIT_BITS;
-    db->ratio = 0;
-    db->bytes_out = 0;
-    db->in_count = 0;
-    db->checkpoint = CHECK_GAP;
-}
-
-/*
- * If the dictionary is full, then see if it is time to reset it.
- *
- * Compute the compression ratio using fixed-point arithmetic
- * with 8 fractional bits.
- *
- * Since we have an infinite stream instead of a single file,
- * watch only the local compression ratio.
- *
- * Since both peers must reset the dictionary at the same time even in
- * the absence of CLEAR codes (while packets are incompressible), they
- * must compute the same ratio.
- */
-static int				/* 1=output CLEAR */
-bsd_check(db)
-    struct bsd_db *db;
-{
-    u_int new_ratio;
-
-    if (db->in_count >= db->checkpoint) {
-	/* age the ratio by limiting the size of the counts */
-	if (db->in_count >= RATIO_MAX
-	    || db->bytes_out >= RATIO_MAX) {
-	    db->in_count -= db->in_count/4;
-	    db->bytes_out -= db->bytes_out/4;
-	}
-
-	db->checkpoint = db->in_count + CHECK_GAP;
-
-	if (db->max_ent >= db->maxmaxcode) {
-	    /* Reset the dictionary only if the ratio is worse,
-	     * or if it looks as if it has been poisoned
-	     * by incompressible data.
-	     *
-	     * This does not overflow, because
-	     *	db->in_count <= RATIO_MAX.
-	     */
-	    new_ratio = db->in_count << RATIO_SCALE_LOG;
-	    if (db->bytes_out != 0)
-		new_ratio /= db->bytes_out;
-
-	    if (new_ratio < db->ratio || new_ratio < 1 * RATIO_SCALE) {
-		bsd_clear(db);
-		return 1;
-	    }
-	    db->ratio = new_ratio;
-	}
-    }
-    return 0;
-}
-
-/*
- * Return statistics.
- */
-static void
-bsd_comp_stats(state, stats)
-    void *state;
-    struct compstat *stats;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int out;
-
-    stats->unc_bytes = db->uncomp_bytes;
-    stats->unc_packets = db->uncomp_count;
-    stats->comp_bytes = db->comp_bytes;
-    stats->comp_packets = db->comp_count;
-    stats->inc_bytes = db->incomp_bytes;
-    stats->inc_packets = db->incomp_count;
-    stats->ratio = db->in_count;
-    out = db->bytes_out;
-    if (stats->ratio <= 0x7fffff)
-	stats->ratio <<= 8;
-    else
-	out >>= 8;
-    if (out != 0)
-	stats->ratio /= out;
-}
-
-/*
- * Reset state, as on a CCP ResetReq.
- */
-static void
-bsd_reset(state)
-    void *state;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-
-    db->seqno = 0;
-    bsd_clear(db);
-    db->clear_count = 0;
-}
-
-/*
- * Allocate space for a (de) compressor.
- */
-static void *
-bsd_alloc(options, opt_len, decomp)
-    u_char *options;
-    int opt_len, decomp;
-{
-    int bits;
-    u_int newlen, hsize, hshift, maxmaxcode;
-    struct bsd_db *db;
-
-    if (opt_len != 3 || options[0] != CI_BSD_COMPRESS || options[1] != 3
-	|| BSD_VERSION(options[2]) != BSD_CURRENT_VERSION)
-	return NULL;
-
-    bits = BSD_NBITS(options[2]);
-    switch (bits) {
-    case 9:			/* needs 82152 for both directions */
-    case 10:			/* needs 84144 */
-    case 11:			/* needs 88240 */
-    case 12:			/* needs 96432 */
-	hsize = 5003;
-	hshift = 4;
-	break;
-    case 13:			/* needs 176784 */
-	hsize = 9001;
-	hshift = 5;
-	break;
-    case 14:			/* needs 353744 */
-	hsize = 18013;
-	hshift = 6;
-	break;
-    case 15:			/* needs 691440 */
-	hsize = 35023;
-	hshift = 7;
-	break;
-    case 16:			/* needs 1366160--far too much, */
-	/* hsize = 69001; */	/* and 69001 is too big for cptr */
-	/* hshift = 8; */	/* in struct bsd_db */
-	/* break; */
-    default:
-	return NULL;
-    }
-
-    maxmaxcode = MAXCODE(bits);
-    newlen = sizeof(*db) + (hsize-1) * (sizeof(db->dict[0]));
-#ifdef __osf__
-    db = (struct bsd_db *) ALLOC_SLEEP(newlen);
-#else
-    db = (struct bsd_db *) ALLOC_NOSLEEP(newlen);
-#endif
-    if (!db)
-	return NULL;
-    bzero(db, sizeof(*db) - sizeof(db->dict));
-
-    if (!decomp) {
-	db->lens = NULL;
-    } else {
-#ifdef __osf__
-	db->lens = (u_short *) ALLOC_SLEEP((maxmaxcode+1) * sizeof(db->lens[0]));
-#else
-	db->lens = (u_short *) ALLOC_NOSLEEP((maxmaxcode+1) * sizeof(db->lens[0]));
-#endif
-	if (!db->lens) {
-	    FREE(db, newlen);
-	    return NULL;
-	}
-    }
-
-    db->totlen = newlen;
-    db->hsize = hsize;
-    db->hshift = hshift;
-    db->maxmaxcode = maxmaxcode;
-    db->maxbits = bits;
-
-    return (void *) db;
-}
-
-static void
-bsd_free(state)
-    void *state;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-
-    if (db->lens)
-	FREE(db->lens, (db->maxmaxcode+1) * sizeof(db->lens[0]));
-    FREE(db, db->totlen);
-}
-
-static void *
-bsd_comp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    return bsd_alloc(options, opt_len, 0);
-}
-
-static void *
-bsd_decomp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    return bsd_alloc(options, opt_len, 1);
-}
-
-/*
- * Initialize the database.
- */
-static int
-bsd_init(db, options, opt_len, unit, hdrlen, mru, debug, decomp)
-    struct bsd_db *db;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug, decomp;
-{
-    int i;
-
-    if (opt_len < CILEN_BSD_COMPRESS
-	|| options[0] != CI_BSD_COMPRESS || options[1] != CILEN_BSD_COMPRESS
-	|| BSD_VERSION(options[2]) != BSD_CURRENT_VERSION
-	|| BSD_NBITS(options[2]) != db->maxbits
-	|| decomp && db->lens == NULL)
-	return 0;
-
-    if (decomp) {
-	i = LAST+1;
-	while (i != 0)
-	    db->lens[--i] = 1;
-    }
-    i = db->hsize;
-    while (i != 0) {
-	db->dict[--i].codem1 = BADCODEM1;
-	db->dict[i].cptr = 0;
-    }
-
-    db->unit = unit;
-    db->hdrlen = hdrlen;
-    db->mru = mru;
-    if (debug)
-	db->debug = 1;
-
-    bsd_reset(db);
-
-    return 1;
-}
-
-static int
-bsd_comp_init(state, options, opt_len, unit, hdrlen, debug)
-    void *state;
-    u_char *options;
-    int opt_len, unit, hdrlen, debug;
-{
-    return bsd_init((struct bsd_db *) state, options, opt_len,
-		    unit, hdrlen, 0, debug, 0);
-}
-
-static int
-bsd_decomp_init(state, options, opt_len, unit, hdrlen, mru, debug)
-    void *state;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug;
-{
-    return bsd_init((struct bsd_db *) state, options, opt_len,
-		    unit, hdrlen, mru, debug, 1);
-}
-
-
-/*
- * compress a packet
- *	One change from the BSD compress command is that when the
- *	code size expands, we do not output a bunch of padding.
- *
- * N.B. at present, we ignore the hdrlen specified in the comp_init call.
- */
-static int			/* new slen */
-bsd_compress(state, mretp, mp, slen, maxolen)
-    void *state;
-    mblk_t **mretp;		/* return compressed mbuf chain here */
-    mblk_t *mp;			/* from here */
-    int slen;			/* uncompressed length */
-    int maxolen;		/* max compressed length */
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    int hshift = db->hshift;
-    u_int max_ent = db->max_ent;
-    u_int n_bits = db->n_bits;
-    u_int bitno = 32;
-    u_int32_t accm = 0, fcode;
-    struct bsd_dict *dictp;
-    u_char c;
-    int hval, disp, ent, ilen;
-    mblk_t *np, *mret;
-    u_char *rptr, *wptr;
-    u_char *cp_end;
-    int olen;
-    mblk_t *m, **mnp;
-
-#define PUTBYTE(v) {					\
-    if (wptr) {						\
-	*wptr++ = (v);					\
-	if (wptr >= cp_end) {				\
-	    m->b_wptr = wptr;				\
-	    m = m->b_cont;				\
-	    if (m) {					\
-		wptr = m->b_wptr;			\
-		cp_end = m->b_datap->db_lim;		\
-	    } else					\
-		wptr = NULL;				\
-	}						\
-    }							\
-    ++olen;						\
-}
-
-#define OUTPUT(ent) {					\
-    bitno -= n_bits;					\
-    accm |= ((ent) << bitno);				\
-    do {						\
-	PUTBYTE(accm >> 24);				\
-	accm <<= 8;					\
-	bitno += 8;					\
-    } while (bitno <= 24);				\
-}
-
-    /*
-     * First get the protocol and check that we're
-     * interested in this packet.
-     */
-    *mretp = NULL;
-    rptr = mp->b_rptr;
-    if (rptr + PPP_HDRLEN > mp->b_wptr) {
-	if (!pullupmsg(mp, PPP_HDRLEN))
-	    return 0;
-	rptr = mp->b_rptr;
-    }
-    ent = PPP_PROTOCOL(rptr);		/* get the protocol */
-    if (ent < 0x21 || ent > 0xf9)
-	return 0;
-
-    /* Don't generate compressed packets which are larger than
-       the uncompressed packet. */
-    if (maxolen > slen)
-	maxolen = slen;
-
-    /* Allocate enough message blocks to give maxolen total space. */
-    mnp = &mret;
-    for (olen = maxolen; olen > 0; ) {
-	m = allocb((olen < 4096? olen: 4096), BPRI_MED);
-	*mnp = m;
-	if (m == NULL) {
-	    if (mret != NULL) {
-		freemsg(mret);
-		mnp = &mret;
-	    }
-	    break;
-	}
-	mnp = &m->b_cont;
-	olen -= m->b_datap->db_lim - m->b_wptr;
-    }
-    *mnp = NULL;
-
-    if ((m = mret) != NULL) {
-	wptr = m->b_wptr;
-	cp_end = m->b_datap->db_lim;
-    } else
-	wptr = cp_end = NULL;
-    olen = 0;
-
-    /*
-     * Copy the PPP header over, changing the protocol,
-     * and install the 2-byte sequence number.
-     */
-    if (wptr) {
-	wptr[0] = PPP_ADDRESS(rptr);
-	wptr[1] = PPP_CONTROL(rptr);
-	wptr[2] = 0;		/* change the protocol */
-	wptr[3] = PPP_COMP;
-	wptr[4] = db->seqno >> 8;
-	wptr[5] = db->seqno;
-	wptr += PPP_HDRLEN + BSD_OVHD;
-    }
-    ++db->seqno;
-    rptr += PPP_HDRLEN;
-
-    slen = mp->b_wptr - rptr;
-    ilen = slen + 1;
-    np = mp->b_cont;
-    for (;;) {
-	if (slen <= 0) {
-	    if (!np)
-		break;
-	    rptr = np->b_rptr;
-	    slen = np->b_wptr - rptr;
-	    np = np->b_cont;
-	    if (!slen)
-		continue;   /* handle 0-length buffers */
-	    ilen += slen;
-	}
-
-	slen--;
-	c = *rptr++;
-	fcode = BSD_KEY(ent, c);
-	hval = BSD_HASH(ent, c, hshift);
-	dictp = &db->dict[hval];
-
-	/* Validate and then check the entry. */
-	if (dictp->codem1 >= max_ent)
-	    goto nomatch;
-	if (dictp->f.fcode == fcode) {
-	    ent = dictp->codem1+1;
-	    continue;	/* found (prefix,suffix) */
-	}
-
-	/* continue probing until a match or invalid entry */
-	disp = (hval == 0) ? 1 : hval;
-	do {
-	    hval += disp;
-	    if (hval >= db->hsize)
-		hval -= db->hsize;
-	    dictp = &db->dict[hval];
-	    if (dictp->codem1 >= max_ent)
-		goto nomatch;
-	} while (dictp->f.fcode != fcode);
-	ent = dictp->codem1 + 1;	/* finally found (prefix,suffix) */
-	continue;
-
-    nomatch:
-	OUTPUT(ent);		/* output the prefix */
-
-	/* code -> hashtable */
-	if (max_ent < db->maxmaxcode) {
-	    struct bsd_dict *dictp2;
-	    /* expand code size if needed */
-	    if (max_ent >= MAXCODE(n_bits))
-		db->n_bits = ++n_bits;
-
-	    /* Invalidate old hash table entry using
-	     * this code, and then take it over.
-	     */
-	    dictp2 = &db->dict[max_ent+1];
-	    if (db->dict[dictp2->cptr].codem1 == max_ent)
-		db->dict[dictp2->cptr].codem1 = BADCODEM1;
-	    dictp2->cptr = hval;
-	    dictp->codem1 = max_ent;
-	    dictp->f.fcode = fcode;
-
-	    db->max_ent = ++max_ent;
-	}
-	ent = c;
-    }
-
-    OUTPUT(ent);		/* output the last code */
-    db->bytes_out += olen;
-    db->in_count += ilen;
-    if (bitno < 32)
-	++db->bytes_out;	/* count complete bytes */
-
-    if (bsd_check(db))
-	OUTPUT(CLEAR);		/* do not count the CLEAR */
-
-    /*
-     * Pad dribble bits of last code with ones.
-     * Do not emit a completely useless byte of ones.
-     */
-    if (bitno != 32)
-	PUTBYTE((accm | (0xff << (bitno-8))) >> 24);
-
-    /*
-     * Increase code size if we would have without the packet
-     * boundary and as the decompressor will.
-     */
-    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
-	db->n_bits++;
-
-    db->uncomp_bytes += ilen;
-    ++db->uncomp_count;
-    if (olen + PPP_HDRLEN + BSD_OVHD > maxolen && mret != NULL) {
-	/* throw away the compressed stuff if it is longer than uncompressed */
-	freemsg(mret);
-	mret = NULL;
-	++db->incomp_count;
-	db->incomp_bytes += ilen;
-    } else if (wptr != NULL) {
-	m->b_wptr = wptr;
-	if (m->b_cont) {
-	    freemsg(m->b_cont);
-	    m->b_cont = NULL;
-	}
-	++db->comp_count;
-	db->comp_bytes += olen + BSD_OVHD;
-    }
-
-    *mretp = mret;
-    return olen + PPP_HDRLEN + BSD_OVHD;
-#undef OUTPUT
-#undef PUTBYTE
-}
-
-
-/*
- * Update the "BSD Compress" dictionary on the receiver for
- * incompressible data by pretending to compress the incoming data.
- */
-static void
-bsd_incomp(state, dmsg)
-    void *state;
-    mblk_t *dmsg;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int hshift = db->hshift;
-    u_int max_ent = db->max_ent;
-    u_int n_bits = db->n_bits;
-    struct bsd_dict *dictp;
-    u_int32_t fcode;
-    u_char c;
-    long hval, disp;
-    int slen, ilen;
-    u_int bitno = 7;
-    u_char *rptr;
-    u_int ent;
-
-    rptr = dmsg->b_rptr;
-    if (rptr + PPP_HDRLEN > dmsg->b_wptr) {
-	if (!pullupmsg(dmsg, PPP_HDRLEN))
-	    return;
-	rptr = dmsg->b_rptr;
-    }
-    ent = PPP_PROTOCOL(rptr);		/* get the protocol */
-    if (ent < 0x21 || ent > 0xf9)
-	return;
-
-    db->seqno++;
-    ilen = 1;		/* count the protocol as 1 byte */
-    rptr += PPP_HDRLEN;
-    for (;;) {
-	slen = dmsg->b_wptr - rptr;
-	if (slen <= 0) {
-	    dmsg = dmsg->b_cont;
-	    if (!dmsg)
-		break;
-	    rptr = dmsg->b_rptr;
-	    continue;		/* skip zero-length buffers */
-	}
-	ilen += slen;
-
-	do {
-	    c = *rptr++;
-	    fcode = BSD_KEY(ent, c);
-	    hval = BSD_HASH(ent, c, hshift);
-	    dictp = &db->dict[hval];
-
-	    /* validate and then check the entry */
-	    if (dictp->codem1 >= max_ent)
-		goto nomatch;
-	    if (dictp->f.fcode == fcode) {
-		ent = dictp->codem1+1;
-		continue;   /* found (prefix,suffix) */
-	    }
-
-	    /* continue probing until a match or invalid entry */
-	    disp = (hval == 0) ? 1 : hval;
-	    do {
-		hval += disp;
-		if (hval >= db->hsize)
-		    hval -= db->hsize;
-		dictp = &db->dict[hval];
-		if (dictp->codem1 >= max_ent)
-		    goto nomatch;
-	    } while (dictp->f.fcode != fcode);
-	    ent = dictp->codem1+1;
-	    continue;	/* finally found (prefix,suffix) */
-
-	nomatch:		/* output (count) the prefix */
-	    bitno += n_bits;
-
-	    /* code -> hashtable */
-	    if (max_ent < db->maxmaxcode) {
-		struct bsd_dict *dictp2;
-		/* expand code size if needed */
-		if (max_ent >= MAXCODE(n_bits))
-		    db->n_bits = ++n_bits;
-
-		/* Invalidate previous hash table entry
-		 * assigned this code, and then take it over.
-		 */
-		dictp2 = &db->dict[max_ent+1];
-		if (db->dict[dictp2->cptr].codem1 == max_ent)
-		    db->dict[dictp2->cptr].codem1 = BADCODEM1;
-		dictp2->cptr = hval;
-		dictp->codem1 = max_ent;
-		dictp->f.fcode = fcode;
-
-		db->max_ent = ++max_ent;
-		db->lens[max_ent] = db->lens[ent]+1;
-	    }
-	    ent = c;
-	} while (--slen != 0);
-    }
-    bitno += n_bits;		/* output (count) the last code */
-    db->bytes_out += bitno/8;
-    db->in_count += ilen;
-    (void)bsd_check(db);
-
-    ++db->incomp_count;
-    db->incomp_bytes += ilen;
-    ++db->uncomp_count;
-    db->uncomp_bytes += ilen;
-
-    /* Increase code size if we would have without the packet
-     * boundary and as the decompressor will.
-     */
-    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
-	db->n_bits++;
-}
-
-
-/*
- * Decompress "BSD Compress"
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression.  For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-bsd_decompress(state, cmsg, dmpp)
-    void *state;
-    mblk_t *cmsg, **dmpp;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int max_ent = db->max_ent;
-    u_int32_t accm = 0;
-    u_int bitno = 32;		/* 1st valid bit in accm */
-    u_int n_bits = db->n_bits;
-    u_int tgtbitno = 32-n_bits;	/* bitno when we have a code */
-    struct bsd_dict *dictp;
-    int explen, i, seq, len;
-    u_int incode, oldcode, finchar;
-    u_char *p, *rptr, *wptr;
-    mblk_t *dmsg, *mret;
-    int adrs, ctrl, ilen;
-    int dlen, space, codelen, extra;
-
-    /*
-     * Get at least the BSD Compress header in the first buffer
-     */
-    rptr = cmsg->b_rptr;
-    if (rptr + PPP_HDRLEN + BSD_OVHD >= cmsg->b_wptr) {
-	if (!pullupmsg(cmsg, PPP_HDRLEN + BSD_OVHD + 1)) {
-	    if (db->debug)
-		printf("bsd_decomp%d: failed to pullup\n", db->unit);
-	    return DECOMP_ERROR;
-	}
-	rptr = cmsg->b_rptr;
-    }
-
-    /*
-     * Save the address/control from the PPP header
-     * and then get the sequence number.
-     */
-    adrs = PPP_ADDRESS(rptr);
-    ctrl = PPP_CONTROL(rptr);
-    rptr += PPP_HDRLEN;
-    seq = (rptr[0] << 8) + rptr[1];
-    rptr += BSD_OVHD;
-    ilen = len = cmsg->b_wptr - rptr;
-
-    /*
-     * Check the sequence number and give up if it is not what we expect.
-     */
-    if (seq != db->seqno++) {
-	if (db->debug)
-	    printf("bsd_decomp%d: bad sequence # %d, expected %d\n",
-		   db->unit, seq, db->seqno - 1);
-	return DECOMP_ERROR;
-    }
-
-    /*
-     * Allocate one message block to start with.
-     */
-    if ((dmsg = allocb(DECOMP_CHUNK + db->hdrlen, BPRI_MED)) == NULL)
-	return DECOMP_ERROR;
-    mret = dmsg;
-    dmsg->b_wptr += db->hdrlen;
-    dmsg->b_rptr = wptr = dmsg->b_wptr;
-
-    /* Fill in the ppp header, but not the last byte of the protocol
-       (that comes from the decompressed data). */
-    wptr[0] = adrs;
-    wptr[1] = ctrl;
-    wptr[2] = 0;
-    wptr += PPP_HDRLEN - 1;
-    space = dmsg->b_datap->db_lim - wptr;
-
-    oldcode = CLEAR;
-    explen = 0;
-    for (;;) {
-	if (len == 0) {
-	    cmsg = cmsg->b_cont;
-	    if (!cmsg)		/* quit at end of message */
-		break;
-	    rptr = cmsg->b_rptr;
-	    len = cmsg->b_wptr - rptr;
-	    ilen += len;
-	    continue;		/* handle 0-length buffers */
-	}
-
-	/*
-	 * Accumulate bytes until we have a complete code.
-	 * Then get the next code, relying on the 32-bit,
-	 * unsigned accm to mask the result.
-	 */
-	bitno -= 8;
-	accm |= *rptr++ << bitno;
-	--len;
-	if (tgtbitno < bitno)
-	    continue;
-	incode = accm >> tgtbitno;
-	accm <<= n_bits;
-	bitno += n_bits;
-
-	if (incode == CLEAR) {
-	    /*
-	     * The dictionary must only be cleared at
-	     * the end of a packet.  But there could be an
-	     * empty message block at the end.
-	     */
-	    if (len > 0 || cmsg->b_cont != 0) {
-		if (cmsg->b_cont)
-		    len += msgdsize(cmsg->b_cont);
-		if (len > 0) {
-		    freemsg(dmsg);
-		    if (db->debug)
-			printf("bsd_decomp%d: bad CLEAR\n", db->unit);
-		    return DECOMP_FATALERROR;
-		}
-	    }
-	    bsd_clear(db);
-	    explen = ilen = 0;
-	    break;
-	}
-
-	if (incode > max_ent + 2 || incode > db->maxmaxcode
-	    || incode > max_ent && oldcode == CLEAR) {
-	    freemsg(dmsg);
-	    if (db->debug) {
-		printf("bsd_decomp%d: bad code 0x%x oldcode=0x%x ",
-		       db->unit, incode, oldcode);
-		printf("max_ent=0x%x dlen=%d seqno=%d\n",
-		       max_ent, dlen, db->seqno);
-	    }
-	    return DECOMP_FATALERROR;	/* probably a bug */
-	}
-
-	/* Special case for KwKwK string. */
-	if (incode > max_ent) {
-	    finchar = oldcode;
-	    extra = 1;
-	} else {
-	    finchar = incode;
-	    extra = 0;
-	}
-
-	codelen = db->lens[finchar];
-	explen += codelen + extra;
-	if (explen > db->mru + 1) {
-	    freemsg(dmsg);
-	    if (db->debug)
-		printf("bsd_decomp%d: ran out of mru\n", db->unit);
-	    return DECOMP_FATALERROR;
-	}
-
-	/*
-	 * Decode this code and install it in the decompressed buffer.
-	 */
-	space -= codelen + extra;
-	if (space < 0) {
-	    /* Allocate another message block. */
-	    dmsg->b_wptr = wptr;
-	    dlen = codelen + extra;
-	    if (dlen < DECOMP_CHUNK)
-		dlen = DECOMP_CHUNK;
-	    if ((dmsg->b_cont = allocb(dlen, BPRI_MED)) == NULL) {
-		freemsg(dmsg);
-		return DECOMP_ERROR;
-	    }
-	    dmsg = dmsg->b_cont;
-	    wptr = dmsg->b_wptr;
-	    space = dmsg->b_datap->db_lim - wptr - codelen - extra;
-	}
-	p = (wptr += codelen);
-	while (finchar > LAST) {
-	    dictp = &db->dict[db->dict[finchar].cptr];
-#ifdef DEBUG
-	    --codelen;
-	    if (codelen <= 0) {
-		freemsg(dmsg);
-		printf("bsd_decomp%d: fell off end of chain ", db->unit);
-		printf("0x%x at 0x%x by 0x%x, max_ent=0x%x\n",
-		       incode, finchar, db->dict[finchar].cptr, max_ent);
-		return DECOMP_FATALERROR;
-	    }
-	    if (dictp->codem1 != finchar-1) {
-		freemsg(dmsg);
-		printf("bsd_decomp%d: bad code chain 0x%x finchar=0x%x ",
-		       db->unit, incode, finchar);
-		printf("oldcode=0x%x cptr=0x%x codem1=0x%x\n", oldcode,
-		       db->dict[finchar].cptr, dictp->codem1);
-		return DECOMP_FATALERROR;
-	    }
-#endif
-	    *--p = dictp->f.hs.suffix;
-	    finchar = dictp->f.hs.prefix;
-	}
-	*--p = finchar;
-
-#ifdef DEBUG
-	if (--codelen != 0)
-	    printf("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n",
-		   db->unit, codelen, incode, max_ent);
-#endif
-
-	if (extra)		/* the KwKwK case again */
-	    *wptr++ = finchar;
-
-	/*
-	 * If not first code in a packet, and
-	 * if not out of code space, then allocate a new code.
-	 *
-	 * Keep the hash table correct so it can be used
-	 * with uncompressed packets.
-	 */
-	if (oldcode != CLEAR && max_ent < db->maxmaxcode) {
-	    struct bsd_dict *dictp2;
-	    u_int32_t fcode;
-	    int hval, disp;
-
-	    fcode = BSD_KEY(oldcode,finchar);
-	    hval = BSD_HASH(oldcode,finchar,db->hshift);
-	    dictp = &db->dict[hval];
-
-	    /* look for a free hash table entry */
-	    if (dictp->codem1 < max_ent) {
-		disp = (hval == 0) ? 1 : hval;
-		do {
-		    hval += disp;
-		    if (hval >= db->hsize)
-			hval -= db->hsize;
-		    dictp = &db->dict[hval];
-		} while (dictp->codem1 < max_ent);
-	    }
-
-	    /*
-	     * Invalidate previous hash table entry
-	     * assigned this code, and then take it over
-	     */
-	    dictp2 = &db->dict[max_ent+1];
-	    if (db->dict[dictp2->cptr].codem1 == max_ent) {
-		db->dict[dictp2->cptr].codem1 = BADCODEM1;
-	    }
-	    dictp2->cptr = hval;
-	    dictp->codem1 = max_ent;
-	    dictp->f.fcode = fcode;
-
-	    db->max_ent = ++max_ent;
-	    db->lens[max_ent] = db->lens[oldcode]+1;
-
-	    /* Expand code size if needed. */
-	    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode) {
-		db->n_bits = ++n_bits;
-		tgtbitno = 32-n_bits;
-	    }
-	}
-	oldcode = incode;
-    }
-    dmsg->b_wptr = wptr;
-
-    /*
-     * Keep the checkpoint right so that incompressible packets
-     * clear the dictionary at the right times.
-     */
-    db->bytes_out += ilen;
-    db->in_count += explen;
-    if (bsd_check(db) && db->debug) {
-	printf("bsd_decomp%d: peer should have cleared dictionary\n",
-	       db->unit);
-    }
-
-    ++db->comp_count;
-    db->comp_bytes += ilen + BSD_OVHD;
-    ++db->uncomp_count;
-    db->uncomp_bytes += explen;
-
-    *dmpp = mret;
-    return DECOMP_OK;
-}
-#endif /* DO_BSD_COMPRESS */
diff --git a/mdk-stage1/ppp/modules/deflate.c b/mdk-stage1/ppp/modules/deflate.c
deleted file mode 100644
index 1b9054412..000000000
--- a/mdk-stage1/ppp/modules/deflate.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/*
- * ppp_deflate.c - interface the zlib procedures for Deflate compression
- * and decompression (as used by gzip) to the PPP code.
- * This version is for use with STREAMS under SunOS 4.x, Solaris 2,
- * SVR4, OSF/1 and AIX 4.x.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifdef AIX4
-#include <net/net_globals.h>
-#endif
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/stream.h>
-#include <net/ppp_defs.h>
-#include "ppp_mod.h"
-
-#define PACKETPTR	mblk_t *
-#include <net/ppp-comp.h>
-
-#ifdef __osf__
-#include "zlib.h"
-#else
-#include "../common/zlib.h"
-#endif
-
-#if DO_DEFLATE
-
-#define DEFLATE_DEBUG	1
-
-/*
- * State for a Deflate (de)compressor.
- */
-struct deflate_state {
-    int		seqno;
-    int		w_size;
-    int		unit;
-    int		hdrlen;
-    int		mru;
-    int		debug;
-    z_stream	strm;
-    struct compstat stats;
-};
-
-#define DEFLATE_OVHD	2		/* Deflate overhead/packet */
-
-static void	*z_alloc __P((void *, u_int items, u_int size));
-static void	*z_alloc_init __P((void *, u_int items, u_int size));
-static void	z_free __P((void *, void *ptr));
-static void	*z_comp_alloc __P((u_char *options, int opt_len));
-static void	*z_decomp_alloc __P((u_char *options, int opt_len));
-static void	z_comp_free __P((void *state));
-static void	z_decomp_free __P((void *state));
-static int	z_comp_init __P((void *state, u_char *options, int opt_len,
-				 int unit, int hdrlen, int debug));
-static int	z_decomp_init __P((void *state, u_char *options, int opt_len,
-				     int unit, int hdrlen, int mru, int debug));
-static int	z_compress __P((void *state, mblk_t **mret,
-				  mblk_t *mp, int slen, int maxolen));
-static void	z_incomp __P((void *state, mblk_t *dmsg));
-static int	z_decompress __P((void *state, mblk_t *cmp,
-				    mblk_t **dmpp));
-static void	z_comp_reset __P((void *state));
-static void	z_decomp_reset __P((void *state));
-static void	z_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to ppp_comp.c.
- */
-struct compressor ppp_deflate = {
-    CI_DEFLATE,			/* compress_proto */
-    z_comp_alloc,		/* comp_alloc */
-    z_comp_free,		/* comp_free */
-    z_comp_init,		/* comp_init */
-    z_comp_reset,		/* comp_reset */
-    z_compress,			/* compress */
-    z_comp_stats,		/* comp_stat */
-    z_decomp_alloc,		/* decomp_alloc */
-    z_decomp_free,		/* decomp_free */
-    z_decomp_init,		/* decomp_init */
-    z_decomp_reset,		/* decomp_reset */
-    z_decompress,		/* decompress */
-    z_incomp,			/* incomp */
-    z_comp_stats,		/* decomp_stat */
-};
-
-struct compressor ppp_deflate_draft = {
-    CI_DEFLATE_DRAFT,		/* compress_proto */
-    z_comp_alloc,		/* comp_alloc */
-    z_comp_free,		/* comp_free */
-    z_comp_init,		/* comp_init */
-    z_comp_reset,		/* comp_reset */
-    z_compress,			/* compress */
-    z_comp_stats,		/* comp_stat */
-    z_decomp_alloc,		/* decomp_alloc */
-    z_decomp_free,		/* decomp_free */
-    z_decomp_init,		/* decomp_init */
-    z_decomp_reset,		/* decomp_reset */
-    z_decompress,		/* decompress */
-    z_incomp,			/* incomp */
-    z_comp_stats,		/* decomp_stat */
-};
-
-#define DECOMP_CHUNK	512
-
-/*
- * Space allocation and freeing routines for use by zlib routines.
- */
-struct zchunk {
-    u_int	size;
-    u_int	guard;
-};
-
-#define GUARD_MAGIC	0x77a6011a
-
-static void *
-z_alloc_init(notused, items, size)
-    void *notused;
-    u_int items, size;
-{
-    struct zchunk *z;
-
-    size = items * size + sizeof(struct zchunk);
-#ifdef __osf__
-    z = (struct zchunk *) ALLOC_SLEEP(size);
-#else
-    z = (struct zchunk *) ALLOC_NOSLEEP(size);
-#endif
-    z->size = size;
-    z->guard = GUARD_MAGIC;
-    return (void *) (z + 1);
-}
-
-static void *
-z_alloc(notused, items, size)
-    void *notused;
-    u_int items, size;
-{
-    struct zchunk *z;
-
-    size = items * size + sizeof(struct zchunk);
-    z = (struct zchunk *) ALLOC_NOSLEEP(size);
-    z->size = size;
-    z->guard = GUARD_MAGIC;
-    return (void *) (z + 1);
-}
-
-static void
-z_free(notused, ptr)
-    void *notused;
-    void *ptr;
-{
-    struct zchunk *z = ((struct zchunk *) ptr) - 1;
-
-    if (z->guard != GUARD_MAGIC) {
-	printf("ppp: z_free of corrupted chunk at %x (%x, %x)\n",
-	       z, z->size, z->guard);
-	return;
-    }
-    FREE(z, z->size);
-}
-
-/*
- * Allocate space for a compressor.
- */
-static void *
-z_comp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    struct deflate_state *state;
-    int w_size;
-
-    if (opt_len != CILEN_DEFLATE
-	|| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return NULL;
-    w_size = DEFLATE_SIZE(options[2]);
-    /*
-     * N.B. the 9 below should be DEFLATE_MIN_SIZE (8), but using
-     * 8 will cause kernel crashes because of a bug in zlib.
-     */
-    if (w_size < 9 || w_size > DEFLATE_MAX_SIZE)
-	return NULL;
-
-
-#ifdef __osf__
-    state = (struct deflate_state *) ALLOC_SLEEP(sizeof(*state));
-#else
-    state = (struct deflate_state *) ALLOC_NOSLEEP(sizeof(*state));
-#endif
-
-    if (state == NULL)
-	return NULL;
-
-    state->strm.next_in = NULL;
-    state->strm.zalloc = (alloc_func) z_alloc_init;
-    state->strm.zfree = (free_func) z_free;
-    if (deflateInit2(&state->strm, Z_DEFAULT_COMPRESSION, DEFLATE_METHOD_VAL,
-		     -w_size, 8, Z_DEFAULT_STRATEGY) != Z_OK) {
-	FREE(state, sizeof(*state));
-	return NULL;
-    }
-
-    state->strm.zalloc = (alloc_func) z_alloc;
-    state->w_size = w_size;
-    bzero(&state->stats, sizeof(state->stats));
-    return (void *) state;
-}
-
-static void
-z_comp_free(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    deflateEnd(&state->strm);
-    FREE(state, sizeof(*state));
-}
-
-static int
-z_comp_init(arg, options, opt_len, unit, hdrlen, debug)
-    void *arg;
-    u_char *options;
-    int opt_len, unit, hdrlen, debug;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    if (opt_len < CILEN_DEFLATE
-	|| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| DEFLATE_SIZE(options[2]) != state->w_size
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return 0;
-
-    state->seqno = 0;
-    state->unit = unit;
-    state->hdrlen = hdrlen;
-    state->debug = debug;
-
-    deflateReset(&state->strm);
-
-    return 1;
-}
-
-static void
-z_comp_reset(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    state->seqno = 0;
-    deflateReset(&state->strm);
-}
-
-static int
-z_compress(arg, mret, mp, orig_len, maxolen)
-    void *arg;
-    mblk_t **mret;		/* compressed packet (out) */
-    mblk_t *mp;		/* uncompressed packet (in) */
-    int orig_len, maxolen;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_char *rptr, *wptr;
-    int proto, olen, wspace, r, flush;
-    mblk_t *m;
-
-    /*
-     * Check that the protocol is in the range we handle.
-     */
-    *mret = NULL;
-    rptr = mp->b_rptr;
-    if (rptr + PPP_HDRLEN > mp->b_wptr) {
-	if (!pullupmsg(mp, PPP_HDRLEN))
-	    return 0;
-	rptr = mp->b_rptr;
-    }
-    proto = PPP_PROTOCOL(rptr);
-    if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
-	return orig_len;
-
-    /* Allocate one mblk initially. */
-    if (maxolen > orig_len)
-	maxolen = orig_len;
-    if (maxolen <= PPP_HDRLEN + 2) {
-	wspace = 0;
-	m = NULL;
-    } else {
-	wspace = maxolen + state->hdrlen;
-	if (wspace > 4096)
-	    wspace = 4096;
-	m = allocb(wspace, BPRI_MED);
-    }
-    if (m != NULL) {
-	*mret = m;
-	if (state->hdrlen + PPP_HDRLEN + 2 < wspace) {
-	    m->b_rptr += state->hdrlen;
-	    m->b_wptr = m->b_rptr;
-	    wspace -= state->hdrlen;
-	}
-	wptr = m->b_wptr;
-
-	/*
-	 * Copy over the PPP header and store the 2-byte sequence number.
-	 */
-	wptr[0] = PPP_ADDRESS(rptr);
-	wptr[1] = PPP_CONTROL(rptr);
-	wptr[2] = PPP_COMP >> 8;
-	wptr[3] = PPP_COMP;
-	wptr += PPP_HDRLEN;
-	wptr[0] = state->seqno >> 8;
-	wptr[1] = state->seqno;
-	wptr += 2;
-	state->strm.next_out = wptr;
-	state->strm.avail_out = wspace - (PPP_HDRLEN + 2);
-    } else {
-	state->strm.next_out = NULL;
-	state->strm.avail_out = 1000000;
-    }
-    ++state->seqno;
-
-    rptr += (proto > 0xff)? 2: 3;	/* skip 1st proto byte if 0 */
-    state->strm.next_in = rptr;
-    state->strm.avail_in = mp->b_wptr - rptr;
-    mp = mp->b_cont;
-    flush = (mp == NULL)? Z_PACKET_FLUSH: Z_NO_FLUSH;
-    olen = 0;
-    for (;;) {
-	r = deflate(&state->strm, flush);
-	if (r != Z_OK) {
-	    printf("z_compress: deflate returned %d (%s)\n",
-		   r, (state->strm.msg? state->strm.msg: ""));
-	    break;
-	}
-	if (flush != Z_NO_FLUSH && state->strm.avail_out != 0)
-	    break;		/* all done */
-	if (state->strm.avail_in == 0 && mp != NULL) {
-	    state->strm.next_in = mp->b_rptr;
-	    state->strm.avail_in = mp->b_wptr - mp->b_rptr;
-	    mp = mp->b_cont;
-	    if (mp == NULL)
-		flush = Z_PACKET_FLUSH;
-	}
-	if (state->strm.avail_out == 0) {
-	    if (m != NULL) {
-		m->b_wptr += wspace;
-		olen += wspace;
-		wspace = maxolen - olen;
-		if (wspace <= 0) {
-		    wspace = 0;
-		    m->b_cont = NULL;
-		} else {
-		    if (wspace < 32)
-			wspace = 32;
-		    else if (wspace > 4096)
-			wspace = 4096;
-		    m->b_cont = allocb(wspace, BPRI_MED);
-		}
-		m = m->b_cont;
-		if (m != NULL) {
-		    state->strm.next_out = m->b_wptr;
-		    state->strm.avail_out = wspace;
-		}
-	    }
-	    if (m == NULL) {
-		state->strm.next_out = NULL;
-		state->strm.avail_out = 1000000;
-	    }
-	}
-    }
-    if (m != NULL) {
-	m->b_wptr += wspace - state->strm.avail_out;
-	olen += wspace - state->strm.avail_out;
-    }
-
-    /*
-     * See if we managed to reduce the size of the packet.
-     */
-    if (olen < orig_len && m != NULL) {
-	state->stats.comp_bytes += olen;
-	state->stats.comp_packets++;
-    } else {
-	if (*mret != NULL) {
-	    freemsg(*mret);
-	    *mret = NULL;
-	}
-	state->stats.inc_bytes += orig_len;
-	state->stats.inc_packets++;
-	olen = orig_len;
-    }
-    state->stats.unc_bytes += orig_len;
-    state->stats.unc_packets++;
-
-    return olen;
-}
-
-static void
-z_comp_stats(arg, stats)
-    void *arg;
-    struct compstat *stats;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_int out;
-
-    *stats = state->stats;
-    stats->ratio = stats->unc_bytes;
-    out = stats->comp_bytes + stats->unc_bytes;
-    if (stats->ratio <= 0x7ffffff)
-	stats->ratio <<= 8;
-    else
-	out >>= 8;
-    if (out != 0)
-	stats->ratio /= out;
-}
-
-/*
- * Allocate space for a decompressor.
- */
-static void *
-z_decomp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    struct deflate_state *state;
-    int w_size;
-
-    if (opt_len != CILEN_DEFLATE
-	|| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return NULL;
-    w_size = DEFLATE_SIZE(options[2]);
-    /*
-     * N.B. the 9 below should be DEFLATE_MIN_SIZE (8), but using
-     * 8 will cause kernel crashes because of a bug in zlib.
-     */
-    if (w_size < 9 || w_size > DEFLATE_MAX_SIZE)
-	return NULL;
-
-#ifdef __osf__
-    state = (struct deflate_state *) ALLOC_SLEEP(sizeof(*state));
-#else
-    state = (struct deflate_state *) ALLOC_NOSLEEP(sizeof(*state));
-#endif
-    if (state == NULL)
-	return NULL;
-
-    state->strm.next_out = NULL;
-    state->strm.zalloc = (alloc_func) z_alloc_init;
-    state->strm.zfree = (free_func) z_free;
-    if (inflateInit2(&state->strm, -w_size) != Z_OK) {
-	FREE(state, sizeof(*state));
-	return NULL;
-    }
-
-    state->strm.zalloc = (alloc_func) z_alloc;
-    state->w_size = w_size;
-    bzero(&state->stats, sizeof(state->stats));
-    return (void *) state;
-}
-
-static void
-z_decomp_free(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    inflateEnd(&state->strm);
-    FREE(state, sizeof(*state));
-}
-
-static int
-z_decomp_init(arg, options, opt_len, unit, hdrlen, mru, debug)
-    void *arg;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    if (opt_len < CILEN_DEFLATE
-	|| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| DEFLATE_SIZE(options[2]) != state->w_size
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return 0;
-
-    state->seqno = 0;
-    state->unit = unit;
-    state->hdrlen = hdrlen;
-    state->debug = debug;
-    state->mru = mru;
-
-    inflateReset(&state->strm);
-
-    return 1;
-}
-
-static void
-z_decomp_reset(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    state->seqno = 0;
-    inflateReset(&state->strm);
-}
-
-/*
- * Decompress a Deflate-compressed packet.
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression.  For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-z_decompress(arg, mi, mop)
-    void *arg;
-    mblk_t *mi, **mop;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    mblk_t *mo, *mo_head;
-    u_char *rptr, *wptr;
-    int rlen, olen, ospace;
-    int seq, i, flush, r, decode_proto;
-    u_char hdr[PPP_HDRLEN + DEFLATE_OVHD];
-
-    *mop = NULL;
-    rptr = mi->b_rptr;
-    for (i = 0; i < PPP_HDRLEN + DEFLATE_OVHD; ++i) {
-	while (rptr >= mi->b_wptr) {
-	    mi = mi->b_cont;
-	    if (mi == NULL)
-		return DECOMP_ERROR;
-	    rptr = mi->b_rptr;
-	}
-	hdr[i] = *rptr++;
-    }
-
-    /* Check the sequence number. */
-    seq = (hdr[PPP_HDRLEN] << 8) + hdr[PPP_HDRLEN+1];
-    if (seq != state->seqno) {
-#if !DEFLATE_DEBUG
-	if (state->debug)
-#endif
-	    printf("z_decompress%d: bad seq # %d, expected %d\n",
-		   state->unit, seq, state->seqno);
-	return DECOMP_ERROR;
-    }
-    ++state->seqno;
-
-    /* Allocate an output message block. */
-    mo = allocb(DECOMP_CHUNK + state->hdrlen, BPRI_MED);
-    if (mo == NULL)
-	return DECOMP_ERROR;
-    mo_head = mo;
-    mo->b_cont = NULL;
-    mo->b_rptr += state->hdrlen;
-    mo->b_wptr = wptr = mo->b_rptr;
-    ospace = DECOMP_CHUNK;
-    olen = 0;
-
-    /*
-     * Fill in the first part of the PPP header.  The protocol field
-     * comes from the decompressed data.
-     */
-    wptr[0] = PPP_ADDRESS(hdr);
-    wptr[1] = PPP_CONTROL(hdr);
-    wptr[2] = 0;
-
-    /*
-     * Set up to call inflate.  We set avail_out to 1 initially so we can
-     * look at the first byte of the output and decide whether we have
-     * a 1-byte or 2-byte protocol field.
-     */
-    state->strm.next_in = rptr;
-    state->strm.avail_in = mi->b_wptr - rptr;
-    mi = mi->b_cont;
-    flush = (mi == NULL)? Z_PACKET_FLUSH: Z_NO_FLUSH;
-    rlen = state->strm.avail_in + PPP_HDRLEN + DEFLATE_OVHD;
-    state->strm.next_out = wptr + 3;
-    state->strm.avail_out = 1;
-    decode_proto = 1;
-
-    /*
-     * Call inflate, supplying more input or output as needed.
-     */
-    for (;;) {
-	r = inflate(&state->strm, flush);
-	if (r != Z_OK) {
-#if !DEFLATE_DEBUG
-	    if (state->debug)
-#endif
-		printf("z_decompress%d: inflate returned %d (%s)\n",
-		       state->unit, r, (state->strm.msg? state->strm.msg: ""));
-	    freemsg(mo_head);
-	    return DECOMP_FATALERROR;
-	}
-	if (flush != Z_NO_FLUSH && state->strm.avail_out != 0)
-	    break;		/* all done */
-	if (state->strm.avail_in == 0 && mi != NULL) {
-	    state->strm.next_in = mi->b_rptr;
-	    state->strm.avail_in = mi->b_wptr - mi->b_rptr;
-	    rlen += state->strm.avail_in;
-	    mi = mi->b_cont;
-	    if (mi == NULL)
-		flush = Z_PACKET_FLUSH;
-	}
-	if (state->strm.avail_out == 0) {
-	    if (decode_proto) {
-		state->strm.avail_out = ospace - PPP_HDRLEN;
-		if ((wptr[3] & 1) == 0) {
-		    /* 2-byte protocol field */
-		    wptr[2] = wptr[3];
-		    --state->strm.next_out;
-		    ++state->strm.avail_out;
-		}
-		decode_proto = 0;
-	    } else {
-		mo->b_wptr += ospace;
-		olen += ospace;
-		mo->b_cont = allocb(DECOMP_CHUNK, BPRI_MED);
-		mo = mo->b_cont;
-		if (mo == NULL) {
-		    freemsg(mo_head);
-		    return DECOMP_ERROR;
-		}
-		state->strm.next_out = mo->b_rptr;
-		state->strm.avail_out = ospace = DECOMP_CHUNK;
-	    }
-	}
-    }
-    if (decode_proto) {
-	freemsg(mo_head);
-	return DECOMP_ERROR;
-    }
-    mo->b_wptr += ospace - state->strm.avail_out;
-    olen += ospace - state->strm.avail_out;
-
-#if DEFLATE_DEBUG
-    if (olen > state->mru + PPP_HDRLEN)
-	printf("ppp_deflate%d: exceeded mru (%d > %d)\n",
-	       state->unit, olen, state->mru + PPP_HDRLEN);
-#endif
-
-    state->stats.unc_bytes += olen;
-    state->stats.unc_packets++;
-    state->stats.comp_bytes += rlen;
-    state->stats.comp_packets++;
-
-    *mop = mo_head;
-    return DECOMP_OK;
-}
-
-/*
- * Incompressible data has arrived - add it to the history.
- */
-static void
-z_incomp(arg, mi)
-    void *arg;
-    mblk_t *mi;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_char *rptr;
-    int rlen, proto, r;
-
-    /*
-     * Check that the protocol is one we handle.
-     */
-    rptr = mi->b_rptr;
-    if (rptr + PPP_HDRLEN > mi->b_wptr) {
-	if (!pullupmsg(mi, PPP_HDRLEN))
-	    return;
-	rptr = mi->b_rptr;
-    }
-    proto = PPP_PROTOCOL(rptr);
-    if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
-	return;
-
-    ++state->seqno;
-
-    /*
-     * Iterate through the message blocks, adding the characters in them
-     * to the decompressor's history.  For the first block, we start
-     * at the either the 1st or 2nd byte of the protocol field,
-     * depending on whether the protocol value is compressible.
-     */
-    rlen = mi->b_wptr - mi->b_rptr;
-    state->strm.next_in = rptr + 3;
-    state->strm.avail_in = rlen - 3;
-    if (proto > 0xff) {
-	--state->strm.next_in;
-	++state->strm.avail_in;
-    }
-    for (;;) {
-	r = inflateIncomp(&state->strm);
-	if (r != Z_OK) {
-	    /* gak! */
-#if !DEFLATE_DEBUG
-	    if (state->debug)
-#endif
-		printf("z_incomp%d: inflateIncomp returned %d (%s)\n",
-		       state->unit, r, (state->strm.msg? state->strm.msg: ""));
-	    return;
-	}
-	mi = mi->b_cont;
-	if (mi == NULL)
-	    break;
-	state->strm.next_in = mi->b_rptr;
-	state->strm.avail_in = mi->b_wptr - mi->b_rptr;
-	rlen += state->strm.avail_in;
-    }
-
-    /*
-     * Update stats.
-     */
-    state->stats.inc_bytes += rlen;
-    state->stats.inc_packets++;
-    state->stats.unc_bytes += rlen;
-    state->stats.unc_packets++;
-}
-
-#endif /* DO_DEFLATE */
diff --git a/mdk-stage1/ppp/modules/if_ppp.c b/mdk-stage1/ppp/modules/if_ppp.c
deleted file mode 100644
index 14e89eb4a..000000000
--- a/mdk-stage1/ppp/modules/if_ppp.c
+++ /dev/null
@@ -1,865 +0,0 @@
-/*
- * if_ppp.c - a network interface connected to a STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SunOS 4 and Digital UNIX.
- *
- * This file provides the glue between PPP and IP.
- */
-
-#define INET	1
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/mbuf.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <net/netisr.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-#include <netinet/in_var.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <net/if_types.h>
-#else
-#include <sys/sockio.h>
-#endif
-#include "ppp_mod.h"
-
-#include <sys/stream.h>
-
-#ifdef SNIT_SUPPORT
-#include <sys/time.h>
-#include <net/nit_if.h>
-#include <netinet/if_ether.h>
-#endif
-
-#ifdef __osf__
-#define SIOCSIFMTU SIOCSIPMTU
-#define SIOCGIFMTU SIOCRIPMTU
-#define IFA_ADDR(ifa)   (*(ifa)->ifa_addr)
-#else
-#define IFA_ADDR(ifa)   ((ifa)->ifa_addr)
-#endif
-
-#define ifr_mtu		ifr_metric
-
-static int if_ppp_open __P((queue_t *, int, int, int));
-static int if_ppp_close __P((queue_t *, int));
-static int if_ppp_wput __P((queue_t *, mblk_t *));
-static int if_ppp_rput __P((queue_t *, mblk_t *));
-
-#define PPP_IF_ID 0x8021
-static struct module_info minfo = {
-    PPP_IF_ID, "if_ppp", 0, INFPSZ, 4096, 128
-};
-
-static struct qinit rinit = {
-    if_ppp_rput, NULL, if_ppp_open, if_ppp_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
-    if_ppp_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-struct streamtab if_pppinfo = {
-    &rinit, &winit, NULL, NULL
-};
-
-typedef struct if_ppp_state {
-    int unit;
-    queue_t *q;
-    int flags;
-} if_ppp_t;
-
-/* Values for flags */
-#define DBGLOG		1
-
-static int if_ppp_count;	/* Number of currently-active streams */
-
-static int ppp_nalloc;		/* Number of elements of ifs and states */
-static struct ifnet **ifs;	/* Array of pointers to interface structs */
-static if_ppp_t **states;	/* Array of pointers to state structs */
-
-static int if_ppp_output __P((struct ifnet *, struct mbuf *,
-			      struct sockaddr *));
-static int if_ppp_ioctl __P((struct ifnet *, u_int, caddr_t));
-static struct mbuf *make_mbufs __P((mblk_t *, int));
-static mblk_t *make_message __P((struct mbuf *, int));
-
-#ifdef SNIT_SUPPORT
-/* Fake ether header for SNIT */
-static struct ether_header snit_ehdr = {{0}, {0}, ETHERTYPE_IP};
-#endif
-
-#ifndef __osf__
-static void ppp_if_detach __P((struct ifnet *));
-
-/*
- * Detach all the interfaces before unloading.
- * Not sure this works.
- */
-int
-if_ppp_unload()
-{
-    int i;
-
-    if (if_ppp_count > 0)
-	return EBUSY;
-    for (i = 0; i < ppp_nalloc; ++i)
-	if (ifs[i] != 0)
-	    ppp_if_detach(ifs[i]);
-    if (ifs) {
-	FREE(ifs, ppp_nalloc * sizeof (struct ifnet *));
-	FREE(states, ppp_nalloc * sizeof (struct if_ppp_t *));
-    }
-    ppp_nalloc = 0;
-    return 0;
-}
-#endif /* __osf__ */
-
-/*
- * STREAMS module entry points.
- */
-static int
-if_ppp_open(q, dev, flag, sflag)
-    queue_t *q;
-    int dev;
-    int flag, sflag;
-{
-    if_ppp_t *sp;
-
-    if (q->q_ptr == 0) {
-	sp = (if_ppp_t *) ALLOC_SLEEP(sizeof (if_ppp_t));
-	if (sp == 0)
-	    return OPENFAIL;
-	bzero(sp, sizeof (if_ppp_t));
-	q->q_ptr = (caddr_t) sp;
-	WR(q)->q_ptr = (caddr_t) sp;
-	sp->unit = -1;		/* no interface unit attached at present */
-	sp->q = WR(q);
-	sp->flags = 0;
-	++if_ppp_count;
-    }
-    return 0;
-}
-
-static int
-if_ppp_close(q, flag)
-    queue_t *q;
-    int flag;
-{
-    if_ppp_t *sp;
-    struct ifnet *ifp;
-
-    sp = (if_ppp_t *) q->q_ptr;
-    if (sp != 0) {
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp closed, q=%x sp=%x\n", q, sp);
-	if (sp->unit >= 0) {
-	    if (sp->unit < ppp_nalloc) {
-		states[sp->unit] = 0;
-		ifp = ifs[sp->unit];
-		if (ifp != 0)
-		    ifp->if_flags &= ~(IFF_UP | IFF_RUNNING);
-#ifdef DEBUG
-	    } else {
-		printf("if_ppp: unit %d nonexistent!\n", sp->unit);
-#endif
-	    }
-	}
-	FREE(sp, sizeof (if_ppp_t));
-	--if_ppp_count;
-    }
-    return 0;
-}
-
-static int
-if_ppp_wput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    if_ppp_t *sp;
-    struct iocblk *iop;
-    int error, unit;
-    struct ifnet *ifp;
-
-    sp = (if_ppp_t *) q->q_ptr;
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	/*
-	 * Now why would we be getting data coming in here??
-	 */
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp: got M_DATA len=%d\n", msgdsize(mp));
-	freemsg(mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp: got ioctl cmd=%x count=%d\n",
-		   iop->ioc_cmd, iop->ioc_count);
-
-	switch (iop->ioc_cmd) {
-	case PPPIO_NEWPPA:		/* well almost */
-	    if (iop->ioc_count != sizeof(int) || sp->unit >= 0)
-		break;
-	    if ((error = NOTSUSER()) != 0)
-		break;
-	    unit = *(int *)mp->b_cont->b_rptr;
-
-	    /* Check that this unit isn't already in use */
-	    if (unit < ppp_nalloc && states[unit] != 0) {
-		error = EADDRINUSE;
-		break;
-	    }
-
-	    /* Extend ifs and states arrays if necessary. */
-	    error = ENOSR;
-	    if (unit >= ppp_nalloc) {
-		int newn;
-		struct ifnet **newifs;
-		if_ppp_t **newstates;
-
-		newn = unit + 4;
-		if (sp->flags & DBGLOG)
-		    printf("if_ppp: extending ifs to %d\n", newn);
-		newifs = (struct ifnet **)
-		    ALLOC_NOSLEEP(newn * sizeof (struct ifnet *));
-		if (newifs == 0)
-		    break;
-		bzero(newifs, newn * sizeof (struct ifnet *));
-		newstates = (if_ppp_t **)
-		    ALLOC_NOSLEEP(newn * sizeof (struct if_ppp_t *));
-		if (newstates == 0) {
-		    FREE(newifs, newn * sizeof (struct ifnet *));
-		    break;
-		}
-		bzero(newstates, newn * sizeof (struct if_ppp_t *));
-		bcopy(ifs, newifs, ppp_nalloc * sizeof(struct ifnet *));
-		bcopy(states, newstates, ppp_nalloc * sizeof(if_ppp_t *));
-		if (ifs) {
-		    FREE(ifs, ppp_nalloc * sizeof(struct ifnet *));
-		    FREE(states, ppp_nalloc * sizeof(if_ppp_t *));
-		}
-		ifs = newifs;
-		states = newstates;
-		ppp_nalloc = newn;
-	    }
-
-	    /* Allocate a new ifnet struct if necessary. */
-	    ifp = ifs[unit];
-	    if (ifp == 0) {
-		ifp = (struct ifnet *) ALLOC_NOSLEEP(sizeof (struct ifnet));
-		if (ifp == 0)
-		    break;
-		bzero(ifp, sizeof (struct ifnet));
-		ifs[unit] = ifp;
-		ifp->if_name = "ppp";
-		ifp->if_unit = unit;
-		ifp->if_mtu = PPP_MTU;
-		ifp->if_flags = IFF_POINTOPOINT | IFF_RUNNING;
-#ifndef __osf__
-#ifdef IFF_MULTICAST
-		ifp->if_flags |= IFF_MULTICAST;
-#endif
-#endif /* __osf__ */
-		ifp->if_output = if_ppp_output;
-#ifdef __osf__
-		ifp->if_version = "Point-to-Point Protocol, version 2.3.11";
-		ifp->if_mediamtu = PPP_MTU;
-		ifp->if_type = IFT_PPP;
-		ifp->if_hdrlen = PPP_HDRLEN;
-		ifp->if_addrlen = 0;
-		ifp->if_flags |= IFF_NOARP | IFF_SIMPLEX | IFF_NOTRAILERS;
-#ifdef IFF_VAR_MTU
-		ifp->if_flags |= IFF_VAR_MTU;
-#endif
-#ifdef NETMASTERCPU
-		ifp->if_affinity = NETMASTERCPU;
-#endif
-#endif
-		ifp->if_ioctl = if_ppp_ioctl;
-		ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
-		if_attach(ifp);
-		if (sp->flags & DBGLOG)
-		    printf("if_ppp: created unit %d\n", unit);
-	    } else {
-		ifp->if_mtu = PPP_MTU;
-		ifp->if_flags |= IFF_RUNNING;
-	    }
-
-	    states[unit] = sp;
-	    sp->unit = unit;
-
-	    error = 0;
-	    iop->ioc_count = 0;
-	    if (sp->flags & DBGLOG)
-		printf("if_ppp: attached unit %d, sp=%x q=%x\n", unit,
-		       sp, sp->q);
-	    break;
-
-	case PPPIO_DEBUG:
-	    error = -1;
-	    if (iop->ioc_count == sizeof(int)) {
-		if (*(int *)mp->b_cont->b_rptr == PPPDBG_LOG + PPPDBG_IF) {
-		    printf("if_ppp: debug log enabled, q=%x sp=%x\n", q, sp);
-		    sp->flags |= DBGLOG;
-		    error = 0;
-		    iop->ioc_count = 0;
-		}
-	    }
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp: ioctl result %d\n", error);
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_count = 0;
-	    iop->ioc_error = error;
-	    qreply(q, mp);
-	}
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-    return 0;
-}
-
-static int
-if_ppp_rput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    if_ppp_t *sp;
-    int proto, s;
-    struct mbuf *mb;
-    struct ifqueue *inq;
-    struct ifnet *ifp;
-    int len;
-
-    sp = (if_ppp_t *) q->q_ptr;
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	/*
-	 * Convert the message into an mbuf chain
-	 * and inject it into the network code.
-	 */
-	if (sp->flags & DBGLOG)
-	    printf("if_ppp: rput pkt len %d data %x %x %x %x %x %x %x %x\n",
-		   msgdsize(mp), mp->b_rptr[0], mp->b_rptr[1], mp->b_rptr[2],
-		   mp->b_rptr[3], mp->b_rptr[4], mp->b_rptr[5], mp->b_rptr[6],
-		   mp->b_rptr[7]);
-
-	if (sp->unit < 0) {
-	    freemsg(mp);
-	    break;
-	}
-	if (sp->unit >= ppp_nalloc || (ifp = ifs[sp->unit]) == 0) {
-#ifdef DEBUG
-	    printf("if_ppp: no unit %d!\n", sp->unit);
-#endif
-	    freemsg(mp);
-	    break;
-	}
-
-	if ((ifp->if_flags & IFF_UP) == 0) {
-	    freemsg(mp);
-	    break;
-	}
-	++ifp->if_ipackets;
-
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	adjmsg(mp, PPP_HDRLEN);
-	len = msgdsize(mp);
-	mb = make_mbufs(mp, sizeof(struct ifnet *));
-	freemsg(mp);
-	if (mb == NULL) {
-	    if (sp->flags & DBGLOG)
-		printf("if_ppp%d: make_mbufs failed\n", ifp->if_unit);
-	    ++ifp->if_ierrors;
-	    break;
-	}
-
-#ifdef SNIT_SUPPORT
-	if (proto == PPP_IP && (ifp->if_flags & IFF_PROMISC)) {
-	    struct nit_if nif;
-
-	    nif.nif_header = (caddr_t) &snit_ehdr;
-	    nif.nif_hdrlen = sizeof(snit_ehdr);
-	    nif.nif_bodylen = len;
-	    nif.nif_promisc = 0;
-	    snit_intr(ifp, mb, &nif);
-	}
-#endif
-
-/*
- * For Digital UNIX, there's space set aside in the header mbuf
- * for the interface info.
- *
- * For Sun it's smuggled around via a pointer at the front of the mbuf.
- */
-#ifdef __osf__
-        mb->m_pkthdr.rcvif = ifp;
-        mb->m_pkthdr.len = len;
-#else
-	mb->m_off -= sizeof(struct ifnet *);
-	mb->m_len += sizeof(struct ifnet *);
-	*mtod(mb, struct ifnet **) = ifp;
-#endif
-
-	inq = 0;
-	switch (proto) {
-	case PPP_IP:
-	    inq = &ipintrq;
-	    schednetisr(NETISR_IP);
-	}
-
-	if (inq != 0) {
-	    s = splhigh();
-	    if (IF_QFULL(inq)) {
-		IF_DROP(inq);
-		++ifp->if_ierrors;
-		if (sp->flags & DBGLOG)
-		    printf("if_ppp: inq full, proto=%x\n", proto);
-		m_freem(mb);
-	    } else {
-		IF_ENQUEUE(inq, mb);
-	    }
-	    splx(s);
-	} else {
-	    if (sp->flags & DBGLOG)
-		printf("if_ppp%d: proto=%x?\n", ifp->if_unit, proto);
-	    ++ifp->if_ierrors;
-	    m_freem(mb);
-	}
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-    return 0;
-}
-
-/*
- * Network code wants to output a packet.
- * Turn it into a STREAMS message and send it down.
- */
-static int
-if_ppp_output(ifp, m0, dst)
-    struct ifnet *ifp;
-    struct mbuf *m0;
-    struct sockaddr *dst;
-{
-    mblk_t *mp;
-    int proto, s;
-    if_ppp_t *sp;
-    u_char *p;
-
-    if ((ifp->if_flags & IFF_UP) == 0) {
-	m_freem(m0);
-	return ENETDOWN;
-    }
-
-    if ((unsigned)ifp->if_unit >= ppp_nalloc) {
-#ifdef DEBUG
-	printf("if_ppp_output: unit %d?\n", ifp->if_unit);
-#endif
-	m_freem(m0);
-	return EINVAL;
-    }
-    sp = states[ifp->if_unit];
-    if (sp == 0) {
-#ifdef DEBUG
-	printf("if_ppp_output: no queue?\n");
-#endif
-	m_freem(m0);
-	return ENETDOWN;
-    }
-
-    if (sp->flags & DBGLOG) {
-	p = mtod(m0, u_char *);
-	printf("if_ppp_output%d: af=%d data=%x %x %x %x %x %x %x %x q=%x\n",
-	       ifp->if_unit, dst->sa_family, p[0], p[1], p[2], p[3], p[4],
-	       p[5], p[6], p[7], sp->q);
-    }
-
-    switch (dst->sa_family) {
-    case AF_INET:
-	proto = PPP_IP;
-#ifdef SNIT_SUPPORT
-	if (ifp->if_flags & IFF_PROMISC) {
-	    struct nit_if nif;
-	    struct mbuf *m;
-	    int len;
-
-	    for (len = 0, m = m0; m != NULL; m = m->m_next)
-		len += m->m_len;
-	    nif.nif_header = (caddr_t) &snit_ehdr;
-	    nif.nif_hdrlen = sizeof(snit_ehdr);
-	    nif.nif_bodylen = len;
-	    nif.nif_promisc = 0;
-	    snit_intr(ifp, m0, &nif);
-	}
-#endif
-	break;
-
-    default:
-	m_freem(m0);
-	return EAFNOSUPPORT;
-    }
-
-    ++ifp->if_opackets;
-    mp = make_message(m0, PPP_HDRLEN);
-    m_freem(m0);
-    if (mp == 0) {
-	++ifp->if_oerrors;
-	return ENOBUFS;
-    }
-    mp->b_rptr -= PPP_HDRLEN;
-    mp->b_rptr[0] = PPP_ALLSTATIONS;
-    mp->b_rptr[1] = PPP_UI;
-    mp->b_rptr[2] = proto >> 8;
-    mp->b_rptr[3] = proto;
-
-    s = splstr();
-    if (sp->flags & DBGLOG)
-	printf("if_ppp: putnext(%x, %x), r=%x w=%x p=%x\n",
-	       sp->q, mp, mp->b_rptr, mp->b_wptr, proto);
-    putnext(sp->q, mp);
-    splx(s);
-
-    return 0;
-}
-
-/*
- * Socket ioctl routine for ppp interfaces.
- */
-static int
-if_ppp_ioctl(ifp, cmd, data)
-    struct ifnet *ifp;
-    u_int cmd;
-    caddr_t data;
-{
-    int s, error;
-    struct ifreq *ifr = (struct ifreq *) data;
-    struct ifaddr *ifa = (struct ifaddr *) data;
-    u_short mtu;
-
-    error = 0;
-    s = splimp();
-    switch (cmd) {
-    case SIOCSIFFLAGS:
-	if ((ifp->if_flags & IFF_RUNNING) == 0)
-	    ifp->if_flags &= ~IFF_UP;
-	break;
-
-    case SIOCSIFADDR:
-	if (IFA_ADDR(ifa).sa_family != AF_INET)
-	    error = EAFNOSUPPORT;
-	break;
-
-    case SIOCSIFDSTADDR:
-	if (IFA_ADDR(ifa).sa_family != AF_INET)
-	    error = EAFNOSUPPORT;
-	break;
-
-    case SIOCSIFMTU:
-	if ((error = NOTSUSER()) != 0)
-	    break;
-#ifdef __osf__
-	/* this hack is necessary because ifioctl checks ifr_data
-	 * in 4.0 and 5.0, but ifr_data and ifr_metric overlay each 
-	 * other in the definition of struct ifreq so pppd can't set both.
-	 */
-        bcopy(ifr->ifr_data, &mtu, sizeof (u_short));
-        ifr->ifr_mtu = mtu;
-#endif
-
-	if (ifr->ifr_mtu < PPP_MINMTU || ifr->ifr_mtu > PPP_MAXMTU) {
-	    error = EINVAL;
-	    break;
-	}
-	ifp->if_mtu = ifr->ifr_mtu;
-	break;
-
-    case SIOCGIFMTU:
-	ifr->ifr_mtu = ifp->if_mtu;
-	break;
-
-    case SIOCADDMULTI:
-    case SIOCDELMULTI:
-	switch(ifr->ifr_addr.sa_family) {
-	case AF_INET:
-	    break;
-	default:
-	    error = EAFNOSUPPORT;
-	    break;
-	}
-	break;
-
-    default:
-	error = EINVAL;
-    }
-    splx(s);
-    return (error);
-}
-
-/*
- * Turn a STREAMS message into an mbuf chain.
- */
-static struct mbuf *
-make_mbufs(mp, off)
-    mblk_t *mp;
-    int off;
-{
-    struct mbuf *head, **prevp, *m;
-    int len, space, n;
-    unsigned char *cp, *dp;
-
-    len = msgdsize(mp);
-    if (len == 0)
-	return 0;
-    prevp = &head;
-    space = 0;
-    cp = mp->b_rptr;
-#ifdef __osf__
-    MGETHDR(m, M_DONTWAIT, MT_DATA);
-    m->m_len = 0;
-    space = MHLEN;
-    *prevp = m;
-    prevp = &m->m_next;
-    dp = mtod(m, unsigned char *);
-    len -= space;
-    off = 0;
-#endif
-    for (;;) {
-	while (cp >= mp->b_wptr) {
-	    mp = mp->b_cont;
-	    if (mp == 0) {
-		*prevp = 0;
-		return head;
-	    }
-	    cp = mp->b_rptr;
-	}
-	n = mp->b_wptr - cp;
-	if (space == 0) {
-	    MGET(m, M_DONTWAIT, MT_DATA);
-	    *prevp = m;
-	    if (m == 0) {
-		if (head != 0)
-		    m_freem(head);
-		return 0;
-	    }
-	    if (len + off > 2 * MLEN) {
-#ifdef __osf__
-		MCLGET(m, M_DONTWAIT);
-#else
-		MCLGET(m);
-#endif
-	    }
-#ifdef __osf__
-	    space = ((m->m_flags & M_EXT) ? MCLBYTES : MLEN);
-#else
-	    space = (m->m_off > MMAXOFF? MCLBYTES: MLEN) - off;
-	    m->m_off += off;
-#endif
-	    m->m_len = 0;
-	    len -= space;
-	    dp = mtod(m, unsigned char *);
-	    off = 0;
-	    prevp = &m->m_next;
-	}
-	if (n > space)
-	    n = space;
-	bcopy(cp, dp, n);
-	cp += n;
-	dp += n;
-	space -= n;
-	m->m_len += n;
-    }
-}
-
-/*
- * Turn an mbuf chain into a STREAMS message.
- */
-#define ALLOCB_MAX	4096
-
-static mblk_t *
-make_message(m, off)
-    struct mbuf *m;
-    int off;
-{
-    mblk_t *head, **prevp, *mp;
-    int len, space, n, nb;
-    unsigned char *cp, *dp;
-    struct mbuf *nm;
-
-    len = 0;
-    for (nm = m; nm != 0; nm = nm->m_next)
-	len += nm->m_len;
-    prevp = &head;
-    space = 0;
-    cp = mtod(m, unsigned char *);
-    nb = m->m_len;
-    for (;;) {
-	while (nb <= 0) {
-	    m = m->m_next;
-	    if (m == 0) {
-		*prevp = 0;
-		return head;
-	    }
-	    cp = mtod(m, unsigned char *);
-	    nb = m->m_len;
-	}
-	if (space == 0) {
-	    space = len + off;
-	    if (space > ALLOCB_MAX)
-		space = ALLOCB_MAX;
-	    mp = allocb(space, BPRI_LO);
-	    *prevp = mp;
-	    if (mp == 0) {
-		if (head != 0)
-		    freemsg(head);
-		return 0;
-	    }
-	    dp = mp->b_rptr += off;
-	    space -= off;
-	    len -= space;
-	    off = 0;
-	    prevp = &mp->b_cont;
-	}
-	n = nb < space? nb: space;
-	bcopy(cp, dp, n);
-	cp += n;
-	dp += n;
-	nb -= n;
-	space -= n;
-	mp->b_wptr = dp;
-    }
-}
-
-/*
- * Digital UNIX doesn't allow for removing ifnet structures
- * from the list.  But then we're not using this as a loadable
- * module anyway, so that's OK.
- *
- * Under SunOS, this should allow the module to be unloaded.
- * Unfortunately, it doesn't seem to detach all the references,
- * so your system may well crash after you unload this module :-(
- */
-#ifndef __osf__
-
-/*
- * Remove an interface from the system.
- * This routine contains magic.
- */
-#include <net/route.h>
-#include <netinet/in_pcb.h>
-#include <netinet/ip_var.h>
-#include <netinet/tcp.h>
-#include <netinet/tcp_timer.h>
-#include <netinet/tcp_var.h>
-#include <netinet/udp.h>
-#include <netinet/udp_var.h>
-
-static void
-ppp_if_detach(ifp)
-    struct ifnet *ifp;
-{
-    int s;
-    struct inpcb *pcb;
-    struct ifaddr *ifa;
-    struct in_ifaddr **inap;
-    struct ifnet **ifpp;
-
-    s = splhigh();
-
-    /*
-     * Clear the interface from any routes currently cached in
-     * TCP or UDP protocol control blocks.
-     */
-    for (pcb = tcb.inp_next; pcb != &tcb; pcb = pcb->inp_next)
-	if (pcb->inp_route.ro_rt && pcb->inp_route.ro_rt->rt_ifp == ifp)
-	    in_losing(pcb);
-    for (pcb = udb.inp_next; pcb != &udb; pcb = pcb->inp_next)
-	if (pcb->inp_route.ro_rt && pcb->inp_route.ro_rt->rt_ifp == ifp)
-	    in_losing(pcb);
-
-    /*
-     * Delete routes through all addresses of the interface.
-     */
-    for (ifa = ifp->if_addrlist; ifa != 0; ifa = ifa->ifa_next) {
-	rtinit(ifa, ifa, SIOCDELRT, RTF_HOST);
-	rtinit(ifa, ifa, SIOCDELRT, 0);
-    }
-
-    /*
-     * Unlink the interface's address(es) from the in_ifaddr list.
-     */
-    for (inap = &in_ifaddr; *inap != 0; ) {
-	if ((*inap)->ia_ifa.ifa_ifp == ifp)
-	    *inap = (*inap)->ia_next;
-	else
-	    inap = &(*inap)->ia_next;
-    }
-
-    /*
-     * Delete the interface from the ifnet list.
-     */
-    for (ifpp = &ifnet; (*ifpp) != 0; ) {
-	if (*ifpp == ifp)
-	    break;
-	ifpp = &(*ifpp)->if_next;
-    }
-    if (*ifpp == 0)
-	printf("couldn't find interface ppp%d in ifnet list\n", ifp->if_unit);
-    else
-	*ifpp = ifp->if_next;
-
-    splx(s);
-}
-
-#endif /* __osf__ */
diff --git a/mdk-stage1/ppp/modules/ppp.c b/mdk-stage1/ppp/modules/ppp.c
deleted file mode 100644
index 44bf08dff..000000000
--- a/mdk-stage1/ppp/modules/ppp.c
+++ /dev/null
@@ -1,2486 +0,0 @@
-/*
- * ppp.c - STREAMS multiplexing pseudo-device driver for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/errno.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <sys/cmn_err.h>
-#define queclass(mp)	((mp)->b_band & QPCTL)
-#else
-#include <sys/ioccom.h>
-#endif
-#include <sys/time.h>
-#ifdef SVR4
-#include <sys/cmn_err.h>
-#include <sys/conf.h>
-#include <sys/dlpi.h>
-#include <sys/ddi.h>
-#ifdef SOL2
-#include <sys/ksynch.h>
-#include <sys/kstat.h>
-#include <sys/sunddi.h>
-#include <sys/ethernet.h>
-#else
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <net/if.h>
-#include <netinet/in.h>
-#endif /* SOL2 */
-#else /* not SVR4 */
-#include <sys/user.h>
-#endif /* SVR4 */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Modifications marked with #ifdef PRIOQ are for priority queueing of
- * interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>.
- */
-#ifdef PRIOQ
-#endif	/* PRIOQ */
-
-#include <netinet/in.h>	/* leave this outside of PRIOQ for htons */
-
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-
-/*
- * The IP module may use this SAP value for IP packets.
- */
-#ifndef ETHERTYPE_IP
-#define ETHERTYPE_IP	0x800
-#endif
-
-#if !defined(ETHERTYPE_IPV6) 
-#define ETHERTYPE_IPV6	0x86dd
-#endif /* !defined(ETHERTYPE_IPV6) */
-
-#if !defined(ETHERTYPE_ALLSAP) && defined(SOL2)
-#define ETHERTYPE_ALLSAP   0
-#endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */
-
-#if !defined(PPP_ALLSAP) && defined(SOL2)
-#define PPP_ALLSAP  PPP_ALLSTATIONS
-#endif /* !defined(PPP_ALLSAP) && defined(SOL2) */
-
-extern time_t time;
-
-#ifdef SOL2
-/*
- * We use this reader-writer lock to ensure that the lower streams
- * stay connected to the upper streams while the lower-side put and
- * service procedures are running.  Essentially it is an existence
- * lock for the upper stream associated with each lower stream.
- */
-krwlock_t ppp_lower_lock;
-#define LOCK_LOWER_W	rw_enter(&ppp_lower_lock, RW_WRITER)
-#define LOCK_LOWER_R	rw_enter(&ppp_lower_lock, RW_READER)
-#define TRYLOCK_LOWER_R	rw_tryenter(&ppp_lower_lock, RW_READER)
-#define UNLOCK_LOWER	rw_exit(&ppp_lower_lock)
-
-#define MT_ENTER(x)	mutex_enter(x)
-#define MT_EXIT(x)	mutex_exit(x)
-
-/*
- * Notes on multithreaded implementation for Solaris 2:
- *
- * We use an inner perimeter around each queue pair and an outer
- * perimeter around the whole driver.  The inner perimeter is
- * entered exclusively for all entry points (open, close, put,
- * service).  The outer perimeter is entered exclusively for open
- * and close and shared for put and service.  This is all done for
- * us by the streams framework.
- *
- * I used to think that the perimeters were entered for the lower
- * streams' put and service routines as well as for the upper streams'.
- * Because of problems experienced by people, and after reading the
- * documentation more closely, I now don't think that is true.  So we
- * now use ppp_lower_lock to give us an existence guarantee on the
- * upper stream controlling each lower stream.
- *
- * Shared entry to the outer perimeter protects the existence of all
- * the upper streams and their upperstr_t structures, and guarantees
- * that the following fields of any upperstr_t won't change:
- * nextmn, next, nextppa.  It guarantees that the lowerq field of an
- * upperstr_t won't go from non-zero to zero, that the global `ppas'
- * won't change and that the no lower stream will get unlinked.
- *
- * Shared (reader) access to ppa_lower_lock guarantees that no lower
- * stream will be unlinked and that the lowerq field of all upperstr_t
- * structures won't change.
- */
-
-#else /* SOL2 */
-#define LOCK_LOWER_W	0
-#define LOCK_LOWER_R	0
-#define TRYLOCK_LOWER_R	1
-#define UNLOCK_LOWER	0
-#define MT_ENTER(x)	0
-#define MT_EXIT(x)	0
-
-#endif /* SOL2 */
-
-/*
- * Private information; one per upper stream.
- */
-typedef struct upperstr {
-    minor_t mn;			/* minor device number */
-    struct upperstr *nextmn;	/* next minor device */
-    queue_t *q;			/* read q associated with this upper stream */
-    int flags;			/* flag bits, see below */
-    int state;			/* current DLPI state */
-    int sap;			/* service access point */
-    int req_sap;		/* which SAP the DLPI client requested */
-    struct upperstr *ppa;	/* control stream for our ppa */
-    struct upperstr *next;	/* next stream for this ppa */
-    uint ioc_id;		/* last ioctl ID for this stream */
-    enum NPmode npmode;		/* what to do with packets on this SAP */
-    unsigned char rblocked;	/* flow control has blocked upper read strm */
-	/* N.B. rblocked is only changed by control stream's put/srv procs */
-    /*
-     * There is exactly one control stream for each PPA.
-     * The following fields are only used for control streams.
-     */
-    int ppa_id;
-    queue_t *lowerq;		/* write queue attached below this PPA */
-    struct upperstr *nextppa;	/* next control stream */
-    int mru;
-    int mtu;
-    struct pppstat stats;	/* statistics */
-    time_t last_sent;		/* time last NP packet sent */
-    time_t last_recv;		/* time last NP packet rcvd */
-#ifdef SOL2
-    kmutex_t stats_lock;	/* lock for stats updates */
-    kstat_t *kstats;		/* stats for netstat */
-#endif /* SOL2 */
-#ifdef LACHTCP
-    int ifflags;
-    char ifname[IFNAMSIZ];
-    struct ifstats ifstats;
-#endif /* LACHTCP */
-} upperstr_t;
-
-/* Values for flags */
-#define US_PRIV		1	/* stream was opened by superuser */
-#define US_CONTROL	2	/* stream is a control stream */
-#define US_BLOCKED	4	/* flow ctrl has blocked lower write stream */
-#define US_LASTMOD	8	/* no PPP modules below us */
-#define US_DBGLOG	0x10	/* log various occurrences */
-#define US_RBLOCKED	0x20	/* flow ctrl has blocked upper read stream */
-
-#if defined(SOL2)
-#if DL_CURRENT_VERSION >= 2
-#define US_PROMISC	0x40	/* stream is promiscuous */
-#endif /* DL_CURRENT_VERSION >= 2 */
-#define US_RAWDATA	0x80	/* raw M_DATA, no DLPI header */
-#endif /* defined(SOL2) */
-
-#ifdef PRIOQ
-static u_char max_band=0;
-static u_char def_band=0;
-
-#define IPPORT_DEFAULT		65535
-
-/*
- * Port priority table
- * Highest priority ports are listed first, lowest are listed last.
- * ICMP & packets using unlisted ports will be treated as "default".
- * If IPPORT_DEFAULT is not listed here, "default" packets will be 
- * assigned lowest priority.
- * Each line should be terminated with "0".
- * Line containing only "0" marks the end of the list.
- */
-
-static u_short prioq_table[]= {
-    113, 53, 0,
-    22, 23, 513, 517, 518, 0,
-    514, 21, 79, 111, 0,
-    25, 109, 110, 0,
-    IPPORT_DEFAULT, 0,
-    20, 70, 80, 8001, 8008, 8080, 0, /* 8001,8008,8080 - common proxy ports */
-0 };
-
-#endif	/* PRIOQ */
-
-
-static upperstr_t *minor_devs = NULL;
-static upperstr_t *ppas = NULL;
-
-#ifdef SVR4
-static int pppopen __P((queue_t *, dev_t *, int, int, cred_t *));
-static int pppclose __P((queue_t *, int, cred_t *));
-#else
-static int pppopen __P((queue_t *, int, int, int));
-static int pppclose __P((queue_t *, int));
-#endif /* SVR4 */
-static int pppurput __P((queue_t *, mblk_t *));
-static int pppuwput __P((queue_t *, mblk_t *));
-static int pppursrv __P((queue_t *));
-static int pppuwsrv __P((queue_t *));
-static int ppplrput __P((queue_t *, mblk_t *));
-static int ppplwput __P((queue_t *, mblk_t *));
-static int ppplrsrv __P((queue_t *));
-static int ppplwsrv __P((queue_t *));
-#ifndef NO_DLPI
-static void dlpi_request __P((queue_t *, mblk_t *, upperstr_t *));
-static void dlpi_error __P((queue_t *, upperstr_t *, int, int, int));
-static void dlpi_ok __P((queue_t *, int));
-#endif
-static int send_data __P((mblk_t *, upperstr_t *));
-static void new_ppa __P((queue_t *, mblk_t *));
-static void attach_ppa __P((queue_t *, mblk_t *));
-static void detach_ppa __P((queue_t *, mblk_t *));
-static void detach_lower __P((queue_t *, mblk_t *));
-static void debug_dump __P((queue_t *, mblk_t *));
-static upperstr_t *find_dest __P((upperstr_t *, int));
-#if defined(SOL2)
-static upperstr_t *find_promisc __P((upperstr_t *, int));
-static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int));
-static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int));
-static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int));
-#endif /* defined(SOL2) */
-static int putctl2 __P((queue_t *, int, int, int));
-static int putctl4 __P((queue_t *, int, int, int));
-static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#ifdef FILTER_PACKETS
-static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#endif /* FILTER_PACKETS */
-
-#define PPP_ID 0xb1a6
-static struct module_info ppp_info = {
-#ifdef PRIOQ
-    PPP_ID, "ppp", 0, 512, 512, 384
-#else
-    PPP_ID, "ppp", 0, 512, 512, 128
-#endif	/* PRIOQ */
-};
-
-static struct qinit pppurint = {
-    pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
-};
-
-static struct qinit pppuwint = {
-    pppuwput, pppuwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplrint = {
-    ppplrput, ppplrsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplwint = {
-    ppplwput, ppplwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-#ifdef LACHTCP
-extern struct ifstats *ifstats;
-int pppdevflag = 0;
-#endif
-
-struct streamtab pppinfo = {
-    &pppurint, &pppuwint,
-    &ppplrint, &ppplwint
-};
-
-int ppp_count;
-
-/*
- * How we maintain statistics.
- */
-#ifdef SOL2
-#define INCR_IPACKETS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[0].value.ul++;	\
-	}
-#define INCR_IERRORS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[1].value.ul++;	\
-	}
-#define INCR_OPACKETS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[2].value.ul++;	\
-	}
-#define INCR_OERRORS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[3].value.ul++;	\
-	}
-#endif
-
-#ifdef LACHTCP
-#define INCR_IPACKETS(ppa)	ppa->ifstats.ifs_ipackets++;
-#define INCR_IERRORS(ppa)	ppa->ifstats.ifs_ierrors++;
-#define INCR_OPACKETS(ppa)	ppa->ifstats.ifs_opackets++;
-#define INCR_OERRORS(ppa)	ppa->ifstats.ifs_oerrors++;
-#endif
-
-/*
- * STREAMS driver entry points.
- */
-static int
-#ifdef SVR4
-pppopen(q, devp, oflag, sflag, credp)
-    queue_t *q;
-    dev_t *devp;
-    int oflag, sflag;
-    cred_t *credp;
-#else
-pppopen(q, dev, oflag, sflag)
-    queue_t *q;
-    int dev;			/* really dev_t */
-    int oflag, sflag;
-#endif
-{
-    upperstr_t *up;
-    upperstr_t **prevp;
-    minor_t mn;
-#ifdef PRIOQ
-    u_short *ptr;
-    u_char new_band;
-#endif	/* PRIOQ */
-
-    if (q->q_ptr)
-	DRV_OPEN_OK(dev);	/* device is already open */
-
-#ifdef PRIOQ
-    /* Calculate max_bband & def_band from definitions in prioq.h
-       This colud be done at some more approtiate time (less often)
-       but this way it works well so I'll just leave it here */
-
-    max_band = 1;
-    def_band = 0;
-    ptr = prioq_table;
-    while (*ptr) {
-        new_band = 1;
-        while (*ptr)
-	    if (*ptr++ == IPPORT_DEFAULT) {
-		new_band = 0;
-		def_band = max_band;
-	    }
-        max_band += new_band;
-        ptr++;
-    }
-    if (def_band)
-        def_band = max_band - def_band;
-    --max_band;
-#endif	/* PRIOQ */
-
-    if (sflag == CLONEOPEN) {
-	mn = 0;
-	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
-	    if (up->mn != mn)
-		break;
-	    ++mn;
-	}
-    } else {
-#ifdef SVR4
-	mn = getminor(*devp);
-#else
-	mn = minor(dev);
-#endif
-	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
-	    if (up->mn >= mn)
-		break;
-	}
-	if (up->mn == mn) {
-	    /* this can't happen */
-	    q->q_ptr = WR(q)->q_ptr = (caddr_t) up;
-	    DRV_OPEN_OK(dev);
-	}
-    }
-
-    /*
-     * Construct a new minor node.
-     */
-    up = (upperstr_t *) ALLOC_SLEEP(sizeof(upperstr_t));
-    bzero((caddr_t) up, sizeof(upperstr_t));
-    if (up == 0) {
-	DPRINT("pppopen: out of kernel memory\n");
-	OPEN_ERROR(ENXIO);
-    }
-    up->nextmn = *prevp;
-    *prevp = up;
-    up->mn = mn;
-#ifdef SVR4
-    *devp = makedevice(getmajor(*devp), mn);
-#endif
-    up->q = q;
-    if (NOTSUSER() == 0)
-	up->flags |= US_PRIV;
-#ifndef NO_DLPI
-    up->state = DL_UNATTACHED;
-#endif
-#ifdef LACHTCP
-    up->ifflags = IFF_UP | IFF_POINTOPOINT;
-#endif
-    up->sap = -1;
-    up->last_sent = up->last_recv = time;
-    up->npmode = NPMODE_DROP;
-    q->q_ptr = (caddr_t) up;
-    WR(q)->q_ptr = (caddr_t) up;
-    noenable(WR(q));
-#ifdef SOL2
-    mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL);
-#endif
-    ++ppp_count;
-
-    qprocson(q);
-    DRV_OPEN_OK(makedev(major(dev), mn));
-}
-
-static int
-#ifdef SVR4
-pppclose(q, flag, credp)
-    queue_t *q;
-    int flag;
-    cred_t *credp;
-#else
-pppclose(q, flag)
-    queue_t *q;
-    int flag;
-#endif
-{
-    upperstr_t *up, **upp;
-    upperstr_t *as, *asnext;
-    upperstr_t **prevp;
-
-    qprocsoff(q);
-
-    up = (upperstr_t *) q->q_ptr;
-    if (up == 0) {
-	DPRINT("pppclose: q_ptr = 0\n");
-	return 0;
-    }
-    if (up->flags & US_DBGLOG)
-	DPRINT2("ppp/%d: close, flags=%x\n", up->mn, up->flags);
-    if (up->flags & US_CONTROL) {
-#ifdef LACHTCP
-	struct ifstats *ifp, *pifp;
-#endif
-	if (up->lowerq != 0) {
-	    /* Gack! the lower stream should have be unlinked earlier! */
-	    DPRINT1("ppp%d: lower stream still connected on close?\n",
-		    up->mn);
-	    LOCK_LOWER_W;
-	    up->lowerq->q_ptr = 0;
-	    RD(up->lowerq)->q_ptr = 0;
-	    up->lowerq = 0;
-	    UNLOCK_LOWER;
-	}
-
-	/*
-	 * This stream represents a PPA:
-	 * For all streams attached to the PPA, clear their
-	 * references to this PPA.
-	 * Then remove this PPA from the list of PPAs.
-	 */
-	for (as = up->next; as != 0; as = asnext) {
-	    asnext = as->next;
-	    as->next = 0;
-	    as->ppa = 0;
-	    if (as->flags & US_BLOCKED) {
-		as->flags &= ~US_BLOCKED;
-		flushq(WR(as->q), FLUSHDATA);
-	    }
-	}
-	for (upp = &ppas; *upp != 0; upp = &(*upp)->nextppa)
-	    if (*upp == up) {
-		*upp = up->nextppa;
-		break;
-	    }
-#ifdef LACHTCP
-	/* Remove the statistics from the active list.  */
-	for (ifp = ifstats, pifp = 0; ifp; ifp = ifp->ifs_next) {
-	    if (ifp == &up->ifstats) {
-		if (pifp)
-		    pifp->ifs_next = ifp->ifs_next;
-		else
-		    ifstats = ifp->ifs_next;
-		break;
-	    }
-	    pifp = ifp;
-	}
-#endif
-    } else {
-	/*
-	 * If this stream is attached to a PPA,
-	 * remove it from the PPA's list.
-	 */
-	if ((as = up->ppa) != 0) {
-	    for (; as->next != 0; as = as->next)
-		if (as->next == up) {
-		    as->next = up->next;
-		    break;
-		}
-	}
-    }
-
-#ifdef SOL2
-    if (up->kstats)
-	kstat_delete(up->kstats);
-    mutex_destroy(&up->stats_lock);
-#endif
-
-    q->q_ptr = NULL;
-    WR(q)->q_ptr = NULL;
-
-    for (prevp = &minor_devs; *prevp != 0; prevp = &(*prevp)->nextmn) {
-	if (*prevp == up) {
-	    *prevp = up->nextmn;
-	    break;
-	}
-    }
-    FREE(up, sizeof(upperstr_t));
-    --ppp_count;
-
-    return 0;
-}
-
-/*
- * A message from on high.  We do one of three things:
- *	- qreply()
- *	- put the message on the lower write stream
- *	- queue it for our service routine
- */
-static int
-pppuwput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *ppa, *nps;
-    struct iocblk *iop;
-    struct linkblk *lb;
-#ifdef LACHTCP
-    struct ifreq *ifr;
-    int i;
-#endif
-    queue_t *lq;
-    int error, n, sap;
-    mblk_t *mq;
-    struct ppp_idle *pip;
-#ifdef PRIOQ
-    queue_t *tlq;
-#endif	/* PRIOQ */
-#ifdef NO_DLPI
-    upperstr_t *os;
-#endif
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppuwput: q_ptr = 0!\n");
-	return 0;
-    }
-    if (mp == 0) {
-	DPRINT1("pppuwput/%d: mp = 0!\n", us->mn);
-	return 0;
-    }
-    if (mp->b_datap == 0) {
-	DPRINT1("pppuwput/%d: mp->b_datap = 0!\n", us->mn);
-	return 0;
-    }
-    switch (mp->b_datap->db_type) {
-#ifndef NO_DLPI
-    case M_PCPROTO:
-    case M_PROTO:
-	dlpi_request(q, mp, us);
-	break;
-#endif /* NO_DLPI */
-
-    case M_DATA:
-	if (us->flags & US_DBGLOG)
-	    DPRINT3("ppp/%d: uwput M_DATA len=%d flags=%x\n",
-		    us->mn, msgdsize(mp), us->flags);
-	if (us->ppa == 0 || msgdsize(mp) > us->ppa->mtu + PPP_HDRLEN
-#ifndef NO_DLPI
-	    || (us->flags & US_CONTROL) == 0
-#endif /* NO_DLPI */
-	    ) {
-	    DPRINT1("pppuwput: junk data len=%d\n", msgdsize(mp));
-	    freemsg(mp);
-	    break;
-	}
-#ifdef NO_DLPI
-	if ((us->flags & US_CONTROL) == 0 && !pass_packet(us, mp, 1))
-	    break;
-#endif
-	if (!send_data(mp, us))
-	    putq(q, mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	if (us->flags & US_DBGLOG)
-	    DPRINT3("ppp/%d: ioctl %x count=%d\n",
-		    us->mn, iop->ioc_cmd, iop->ioc_count);
-	switch (iop->ioc_cmd) {
-#if defined(SOL2)
-	case DLIOCRAW:	    /* raw M_DATA mode */
-	    us->flags |= US_RAWDATA;
-	    error = 0;
-	    break;
-#endif /* defined(SOL2) */
-	case I_LINK:
-	    if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_LINK b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    lb = (struct linkblk *) mp->b_cont->b_rptr;
-	    lq = lb->l_qbot;
-	    if (lq == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn);
-		break;
-	    }
-	    LOCK_LOWER_W;
-	    us->lowerq = lq;
-	    lq->q_ptr = (caddr_t) q;
-	    RD(lq)->q_ptr = (caddr_t) us->q;
-	    UNLOCK_LOWER;
-	    iop->ioc_count = 0;
-	    error = 0;
-	    us->flags &= ~US_LASTMOD;
-	    /* Unblock upper streams which now feed this lower stream. */
-	    qenable(q);
-	    /* Send useful information down to the modules which
-	       are now linked below us. */
-	    putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id);
-	    putctl4(lq, M_CTL, PPPCTL_MRU, us->mru);
-	    putctl4(lq, M_CTL, PPPCTL_MTU, us->mtu);
-#ifdef PRIOQ
-            /* Lower tty driver's queue hiwat/lowat from default 4096/128
-               to 256/128 since we don't want queueing of data on
-               output to physical device */
-
-            freezestr(lq);
-            for (tlq = lq; tlq->q_next != NULL; tlq = tlq->q_next)
-		;
-            strqset(tlq, QHIWAT, 0, 256);
-            strqset(tlq, QLOWAT, 0, 128);
-            unfreezestr(lq);
-#endif	/* PRIOQ */
-	    break;
-
-	case I_UNLINK:
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_UNLINK b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    lb = (struct linkblk *) mp->b_cont->b_rptr;
-#if DEBUG
-	    if (us->lowerq != lb->l_qbot) {
-		DPRINT2("ppp unlink: lowerq=%x qbot=%x\n",
-			us->lowerq, lb->l_qbot);
-		break;
-	    }
-#endif
-	    iop->ioc_count = 0;
-	    qwriter(q, mp, detach_lower, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-	case PPPIO_NEWPPA:
-	    if (us->flags & US_CONTROL)
-		break;
-	    if ((us->flags & US_PRIV) == 0) {
-		error = EPERM;
-		break;
-	    }
-	    /* Arrange to return an int */
-	    if ((mq = mp->b_cont) == 0
-		|| mq->b_datap->db_lim - mq->b_rptr < sizeof(int)) {
-		mq = allocb(sizeof(int), BPRI_HI);
-		if (mq == 0) {
-		    error = ENOSR;
-		    break;
-		}
-		if (mp->b_cont != 0)
-		    freemsg(mp->b_cont);
-		mp->b_cont = mq;
-		mq->b_cont = 0;
-	    }
-	    iop->ioc_count = sizeof(int);
-	    mq->b_wptr = mq->b_rptr + sizeof(int);
-	    qwriter(q, mp, new_ppa, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-	case PPPIO_ATTACH:
-	    /* like dlpi_attach, for programs which can't write to
-	       the stream (like pppstats) */
-	    if (iop->ioc_count != sizeof(int) || us->ppa != 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_ATTACH b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
-		if (ppa->ppa_id == n)
-		    break;
-	    if (ppa == 0)
-		break;
-	    us->ppa = ppa;
-	    iop->ioc_count = 0;
-	    qwriter(q, mp, attach_ppa, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-#ifdef NO_DLPI
-	case PPPIO_BIND:
-	    /* Attach to a given SAP. */
-	    if (iop->ioc_count != sizeof(int) || us->ppa == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_BIND b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    /* n must be a valid PPP network protocol number. */
-	    if (n < 0x21 || n > 0x3fff || (n & 0x101) != 1)
-		break;
-	    /* check that no other stream is bound to this sap already. */
-	    for (os = us->ppa; os != 0; os = os->next)
-		if (os->sap == n)
-		    break;
-	    if (os != 0)
-		break;
-	    us->sap = n;
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-#endif /* NO_DLPI */
-
-	case PPPIO_MRU:
-	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_MRU b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n <= 0 || n > PPP_MAXMRU)
-		break;
-	    if (n < PPP_MRU)
-		n = PPP_MRU;
-	    us->mru = n;
-	    if (us->lowerq)
-		putctl4(us->lowerq, M_CTL, PPPCTL_MRU, n);
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_MTU:
-	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_MTU b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n <= 0 || n > PPP_MAXMTU)
-		break;
-	    us->mtu = n;
-#ifdef LACHTCP
-	    /* The MTU reported in netstat, not used as IP max packet size! */
-	    us->ifstats.ifs_mtu = n;
-#endif
-	    if (us->lowerq)
-		putctl4(us->lowerq, M_CTL, PPPCTL_MTU, n);
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_LASTMOD:
-	    us->flags |= US_LASTMOD;
-	    error = 0;
-	    break;
-
-	case PPPIO_DEBUG:
-	    if (iop->ioc_count != sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_DEBUG b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n == PPPDBG_DUMP + PPPDBG_DRIVER) {
-		qwriter(q, NULL, debug_dump, PERIM_OUTER);
-		iop->ioc_count = 0;
-		error = -1;
-	    } else if (n == PPPDBG_LOG + PPPDBG_DRIVER) {
-		DPRINT1("ppp/%d: debug log enabled\n", us->mn);
-		us->flags |= US_DBGLOG;
-		iop->ioc_count = 0;
-		error = 0;
-	    } else {
-		if (us->ppa == 0 || us->ppa->lowerq == 0)
-		    break;
-		putnext(us->ppa->lowerq, mp);
-		error = -1;
-	    }
-	    break;
-
-	case PPPIO_NPMODE:
-	    if (iop->ioc_count != 2 * sizeof(int))
-		break;
-	    if ((us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_NPMODE b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    sap = ((int *)mp->b_cont->b_rptr)[0];
-	    for (nps = us->next; nps != 0; nps = nps->next) {
-		if (us->flags & US_DBGLOG)
-		    DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap);
-		if (nps->sap == sap)
-		    break;
-	    }
-	    if (nps == 0) {
-		if (us->flags & US_DBGLOG)
-		    DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap);
-		break;
-	    }
-	    /* XXX possibly should use qwriter here */
-	    nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1];
-	    if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0)
-		qenable(WR(nps->q));
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_GIDLE:
-	    if ((ppa = us->ppa) == 0)
-		break;
-	    mq = allocb(sizeof(struct ppp_idle), BPRI_HI);
-	    if (mq == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = mq;
-	    mq->b_cont = 0;
-	    pip = (struct ppp_idle *) mq->b_wptr;
-	    pip->xmit_idle = time - ppa->last_sent;
-	    pip->recv_idle = time - ppa->last_recv;
-	    mq->b_wptr += sizeof(struct ppp_idle);
-	    iop->ioc_count = sizeof(struct ppp_idle);
-	    error = 0;
-	    break;
-
-#ifdef LACHTCP
-	case SIOCSIFNAME:
-	    /* Sent from IP down to us.  Attach the ifstats structure.  */
-	    if (iop->ioc_count != sizeof(struct ifreq) || us->ppa == 0)
-	        break;
-	    ifr = (struct ifreq *)mp->b_cont->b_rptr;
-	    /* Find the unit number in the interface name.  */
-	    for (i = 0; i < IFNAMSIZ; i++) {
-		if (ifr->ifr_name[i] == 0 ||
-		    (ifr->ifr_name[i] >= '0' &&
-		     ifr->ifr_name[i] <= '9'))
-		    break;
-		else
-		    us->ifname[i] = ifr->ifr_name[i];
-	    }
-	    us->ifname[i] = 0;
-
-	    /* Convert the unit number to binary.  */
-	    for (n = 0; i < IFNAMSIZ; i++) {
-		if (ifr->ifr_name[i] == 0) {
-		    break;
-		}
-	        else {
-		    n = n * 10 + ifr->ifr_name[i] - '0';
-		}
-	    }
-
-	    /* Verify the ppa.  */
-	    if (us->ppa->ppa_id != n)
-		break;
-	    ppa = us->ppa;
-
-	    /* Set up the netstat block.  */
-	    strncpy (ppa->ifname, us->ifname, IFNAMSIZ);
-
-	    ppa->ifstats.ifs_name = ppa->ifname;
-	    ppa->ifstats.ifs_unit = n;
-	    ppa->ifstats.ifs_active = us->state != DL_UNBOUND;
-	    ppa->ifstats.ifs_mtu = ppa->mtu;
-
-	    /* Link in statistics used by netstat.  */
-	    ppa->ifstats.ifs_next = ifstats;
-	    ifstats = &ppa->ifstats;
-
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case SIOCGIFFLAGS:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-	        else
-		    break;
-	    }
-	    ((struct iocblk_in *)iop)->ioc_ifflags = us->ifflags;
-	    error = 0;
-	    break;
-
-	case SIOCSIFFLAGS:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-		else
-		    break;
-	    }
-	    us->ifflags = ((struct iocblk_in *)iop)->ioc_ifflags;
-	    error = 0;
-	    break;
-
-	case SIOCSIFADDR:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-		else
-		    break;
-	    }
-	    us->ifflags |= IFF_RUNNING;
-	    ((struct iocblk_in *)iop)->ioc_ifflags |= IFF_RUNNING;
-	    error = 0;
-	    break;
-
-	case SIOCSIFMTU:
-	    /*
-	     * Vanilla SVR4 systems don't handle SIOCSIFMTU, rather
-	     * they take the MTU from the DL_INFO_ACK we sent in response
-	     * to their DL_INFO_REQ.  Fortunately, they will update the
-	     * MTU if we send an unsolicited DL_INFO_ACK up.
-	     */
-	    if ((mq = allocb(sizeof(dl_info_req_t), BPRI_HI)) == 0)
-		break;		/* should do bufcall */
-	    ((union DL_primitives *)mq->b_rptr)->dl_primitive = DL_INFO_REQ;
-	    mq->b_wptr = mq->b_rptr + sizeof(dl_info_req_t);
-	    dlpi_request(q, mq, us);
-	    error = 0;
-	    break;
-
-	case SIOCGIFNETMASK:
-	case SIOCSIFNETMASK:
-	case SIOCGIFADDR:
-	case SIOCGIFDSTADDR:
-	case SIOCSIFDSTADDR:
-	case SIOCGIFMETRIC:
-	    error = 0;
-	    break;
-#endif /* LACHTCP */
-
-	default:
-	    if (us->ppa == 0 || us->ppa->lowerq == 0)
-		break;
-	    us->ioc_id = iop->ioc_id;
-	    error = -1;
-	    switch (iop->ioc_cmd) {
-	    case PPPIO_GETSTAT:
-	    case PPPIO_GETCSTAT:
-		if (us->flags & US_LASTMOD) {
-		    error = EINVAL;
-		    break;
-		}
-		putnext(us->ppa->lowerq, mp);
-		break;
-	    default:
-		if (us->flags & US_PRIV)
-		    putnext(us->ppa->lowerq, mp);
-		else {
-		    DPRINT1("ppp ioctl %x rejected\n", iop->ioc_cmd);
-		    error = EPERM;
-		}
-		break;
-	    }
-	    break;
-	}
-
-	if (error > 0) {
-	    iop->ioc_error = error;
-	    mp->b_datap->db_type = M_IOCNAK;
-	    qreply(q, mp);
-	} else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_FLUSH:
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("ppp/%d: flush %x\n", us->mn, *mp->b_rptr);
-	if (*mp->b_rptr & FLUSHW)
-	    flushq(q, FLUSHDATA);
-	if (*mp->b_rptr & FLUSHR) {
-	    *mp->b_rptr &= ~FLUSHW;
-	    qreply(q, mp);
-	} else
-	    freemsg(mp);
-	break;
-
-    default:
-	freemsg(mp);
-	break;
-    }
-    return 0;
-}
-
-#ifndef NO_DLPI
-static void
-dlpi_request(q, mp, us)
-    queue_t *q;
-    mblk_t *mp;
-    upperstr_t *us;
-{
-    union DL_primitives *d = (union DL_primitives *) mp->b_rptr;
-    int size = mp->b_wptr - mp->b_rptr;
-    mblk_t *reply, *np;
-    upperstr_t *ppa, *os;
-    int sap, len;
-    dl_info_ack_t *info;
-    dl_bind_ack_t *ackp;
-#if DL_CURRENT_VERSION >= 2
-    dl_phys_addr_ack_t	*paddrack;
-    static struct ether_addr eaddr = {0};
-#endif
-
-    if (us->flags & US_DBGLOG)
-	DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn,
-		d->dl_primitive, size);
-    switch (d->dl_primitive) {
-    case DL_INFO_REQ:
-	if (size < sizeof(dl_info_req_t))
-	    goto badprim;
-	if ((reply = allocb(sizeof(dl_info_ack_t), BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	reply->b_datap->db_type = M_PCPROTO;
-	info = (dl_info_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_info_ack_t);
-	bzero((caddr_t) info, sizeof(dl_info_ack_t));
-	info->dl_primitive = DL_INFO_ACK;
-	info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU;
-	info->dl_min_sdu = 1;
-	info->dl_addr_length = sizeof(uint);
-	info->dl_mac_type = DL_ETHER;	/* a bigger lie */
-	info->dl_current_state = us->state;
-	info->dl_service_mode = DL_CLDLS;
-	info->dl_provider_style = DL_STYLE2;
-#if DL_CURRENT_VERSION >= 2
-	info->dl_sap_length = sizeof(uint);
-	info->dl_version = DL_CURRENT_VERSION;
-#endif
-	qreply(q, reply);
-	break;
-
-    case DL_ATTACH_REQ:
-	if (size < sizeof(dl_attach_req_t))
-	    goto badprim;
-	if (us->state != DL_UNATTACHED || us->ppa != 0) {
-	    dlpi_error(q, us, DL_ATTACH_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
-	    if (ppa->ppa_id == d->attach_req.dl_ppa)
-		break;
-	if (ppa == 0) {
-	    dlpi_error(q, us, DL_ATTACH_REQ, DL_BADPPA, 0);
-	    break;
-	}
-	us->ppa = ppa;
-	qwriter(q, mp, attach_ppa, PERIM_OUTER);
-	return;
-
-    case DL_DETACH_REQ:
-	if (size < sizeof(dl_detach_req_t))
-	    goto badprim;
-	if (us->state != DL_UNBOUND || us->ppa == 0) {
-	    dlpi_error(q, us, DL_DETACH_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	qwriter(q, mp, detach_ppa, PERIM_OUTER);
-	return;
-
-    case DL_BIND_REQ:
-	if (size < sizeof(dl_bind_req_t))
-	    goto badprim;
-	if (us->state != DL_UNBOUND || us->ppa == 0) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-#if 0
-	/* apparently this test fails (unnecessarily?) on some systems */
-	if (d->bind_req.dl_service_mode != DL_CLDLS) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_UNSUPPORTED, 0);
-	    break;
-	}
-#endif
-
-	/* saps must be valid PPP network protocol numbers,
-	   except that we accept ETHERTYPE_IP in place of PPP_IP. */
-	sap = d->bind_req.dl_sap;
-	us->req_sap = sap;
-
-#if defined(SOL2)
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us);
-
-	if (sap == ETHERTYPE_IP)	    /* normal IFF_IPV4 */
-	    sap = PPP_IP;
-	else if (sap == ETHERTYPE_IPV6)	    /* when IFF_IPV6 is set */
-	    sap = PPP_IPV6;
-	else if (sap == ETHERTYPE_ALLSAP)   /* snoop gives sap of 0 */
-	    sap = PPP_ALLSAP;
-	else {
-	    DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us);
-	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
-	    break;
-	}
-#else
-	if (sap == ETHERTYPE_IP)
-	    sap = PPP_IP;
-	if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
-	    break;
-	}
-#endif /* defined(SOL2) */
-
-	/* check that no other stream is bound to this sap already. */
-	for (os = us->ppa; os != 0; os = os->next)
-	    if (os->sap == sap)
-		break;
-	if (os != 0) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_NOADDR, 0);
-	    break;
-	}
-
-	us->sap = sap;
-	us->state = DL_IDLE;
-
-	if ((reply = allocb(sizeof(dl_bind_ack_t) + sizeof(uint),
-			    BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	ackp = (dl_bind_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_bind_ack_t) + sizeof(uint);
-	reply->b_datap->db_type = M_PCPROTO;
-	bzero((caddr_t) ackp, sizeof(dl_bind_ack_t));
-	ackp->dl_primitive = DL_BIND_ACK;
-	ackp->dl_sap = sap;
-	ackp->dl_addr_length = sizeof(uint);
-	ackp->dl_addr_offset = sizeof(dl_bind_ack_t);
-	*(uint *)(ackp+1) = sap;
-	qreply(q, reply);
-	break;
-
-    case DL_UNBIND_REQ:
-	if (size < sizeof(dl_unbind_req_t))
-	    goto badprim;
-	if (us->state != DL_IDLE) {
-	    dlpi_error(q, us, DL_UNBIND_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	us->sap = -1;
-	us->state = DL_UNBOUND;
-#ifdef LACHTCP
-	us->ppa->ifstats.ifs_active = 0;
-#endif
-	dlpi_ok(q, DL_UNBIND_REQ);
-	break;
-
-    case DL_UNITDATA_REQ:
-	if (size < sizeof(dl_unitdata_req_t))
-	    goto badprim;
-	if (us->state != DL_IDLE) {
-	    dlpi_error(q, us, DL_UNITDATA_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	if ((ppa = us->ppa) == 0) {
-	    cmn_err(CE_CONT, "ppp: in state dl_idle but ppa == 0?\n");
-	    break;
-	}
-	len = mp->b_cont == 0? 0: msgdsize(mp->b_cont);
-	if (len > ppa->mtu) {
-	    DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu);
-	    break;
-	}
-
-#if defined(SOL2)
-	/*
-	 * Should there be any promiscuous stream(s), send the data
-	 * up for each promiscuous stream that we recognize.
-	 */
-	if (mp->b_cont)
-	    promisc_sendup(ppa, mp->b_cont, us->sap, 0);
-#endif /* defined(SOL2) */
-
-	mp->b_band = 0;
-#ifdef PRIOQ
-        /* Extract s_port & d_port from IP-packet, the code is a bit
-           dirty here, but so am I, too... */
-        if (mp->b_datap->db_type == M_PROTO && us->sap == PPP_IP
-	    && mp->b_cont != 0) {
-	    u_char *bb, *tlh;
-	    int iphlen, len;
-	    u_short *ptr;
-	    u_char band_unset, cur_band, syn;
-	    u_short s_port, d_port;
-
-            bb = mp->b_cont->b_rptr; /* bb points to IP-header*/
-	    len = mp->b_cont->b_wptr - mp->b_cont->b_rptr;
-            syn = 0;
-	    s_port = IPPORT_DEFAULT;
-	    d_port = IPPORT_DEFAULT;
-	    if (len >= 20) {	/* 20 = minimum length of IP header */
-		iphlen = (bb[0] & 0x0f) * 4;
-		tlh = bb + iphlen;
-		len -= iphlen;
-		switch (bb[9]) {
-		case IPPROTO_TCP:
-		    if (len >= 20) {	      /* min length of TCP header */
-			s_port = (tlh[0] << 8) + tlh[1];
-			d_port = (tlh[2] << 8) + tlh[3];
-			syn = tlh[13] & 0x02;
-		    }
-		    break;
-		case IPPROTO_UDP:
-		    if (len >= 8) {	      /* min length of UDP header */
-			s_port = (tlh[0] << 8) + tlh[1];
-			d_port = (tlh[2] << 8) + tlh[3];
-		    }
-		    break;
-		}
-	    }
-
-            /*
-	     * Now calculate b_band for this packet from the
-	     * port-priority table.
-	     */
-            ptr = prioq_table;
-            cur_band = max_band;
-            band_unset = 1;
-            while (*ptr) {
-                while (*ptr && band_unset)
-                    if (s_port == *ptr || d_port == *ptr++) {
-                        mp->b_band = cur_band;
-                        band_unset = 0;
-                        break;
-		    }
-                ptr++;
-                cur_band--;
-	    }
-            if (band_unset)
-		mp->b_band = def_band;
-            /* It may be usable to urge SYN packets a bit */
-            if (syn)
-		mp->b_band++;
-	}
-#endif	/* PRIOQ */
-	/* this assumes PPP_HDRLEN <= sizeof(dl_unitdata_req_t) */
-	if (mp->b_datap->db_ref > 1) {
-	    np = allocb(PPP_HDRLEN, BPRI_HI);
-	    if (np == 0)
-		break;		/* gak! */
-	    np->b_cont = mp->b_cont;
-	    mp->b_cont = 0;
-	    freeb(mp);
-	    mp = np;
-	} else
-	    mp->b_datap->db_type = M_DATA;
-	/* XXX should use dl_dest_addr_offset/length here,
-	   but we would have to translate ETHERTYPE_IP -> PPP_IP */
-	mp->b_wptr = mp->b_rptr + PPP_HDRLEN;
-	mp->b_rptr[0] = PPP_ALLSTATIONS;
-	mp->b_rptr[1] = PPP_UI;
-	mp->b_rptr[2] = us->sap >> 8;
-	mp->b_rptr[3] = us->sap;
-	if (pass_packet(us, mp, 1)) {
-	    if (!send_data(mp, us))
-		putq(q, mp);
-	}
-	return;
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_PHYS_ADDR_REQ:
-	if (size < sizeof(dl_phys_addr_req_t))
-	    goto badprim;
-
-	/*
-	 * Don't check state because ifconfig sends this one down too
-	 */
-
-	if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL, 
-			BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	reply->b_datap->db_type = M_PCPROTO;
-	paddrack = (dl_phys_addr_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_phys_addr_ack_t);
-	bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL);
-	paddrack->dl_primitive = DL_PHYS_ADDR_ACK;
-	paddrack->dl_addr_length = ETHERADDRL;
-	paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t);
-	bcopy(&eaddr, reply->b_wptr, ETHERADDRL);
-	reply->b_wptr += ETHERADDRL;
-	qreply(q, reply);
-	break;
-
-#if defined(SOL2)
-    case DL_PROMISCON_REQ:
-	if (size < sizeof(dl_promiscon_req_t))
-	    goto badprim;
-	us->flags |= US_PROMISC;
-	dlpi_ok(q, DL_PROMISCON_REQ);
-	break;
-
-    case DL_PROMISCOFF_REQ:
-	if (size < sizeof(dl_promiscoff_req_t))
-	    goto badprim;
-	us->flags &= ~US_PROMISC;
-	dlpi_ok(q, DL_PROMISCOFF_REQ);
-	break;
-#else
-    case DL_PROMISCON_REQ:	    /* fall thru */
-    case DL_PROMISCOFF_REQ:	    /* fall thru */
-#endif /* defined(SOL2) */
-#endif /* DL_CURRENT_VERSION >= 2 */
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_SET_PHYS_ADDR_REQ:
-    case DL_SUBS_BIND_REQ:
-    case DL_SUBS_UNBIND_REQ:
-    case DL_ENABMULTI_REQ:
-    case DL_DISABMULTI_REQ:
-    case DL_XID_REQ:
-    case DL_TEST_REQ:
-    case DL_REPLY_UPDATE_REQ:
-    case DL_REPLY_REQ:
-    case DL_DATA_ACK_REQ:
-#endif
-    case DL_CONNECT_REQ:
-    case DL_TOKEN_REQ:
-	dlpi_error(q, us, d->dl_primitive, DL_NOTSUPPORTED, 0);
-	break;
-
-    case DL_CONNECT_RES:
-    case DL_DISCONNECT_REQ:
-    case DL_RESET_REQ:
-    case DL_RESET_RES:
-	dlpi_error(q, us, d->dl_primitive, DL_OUTSTATE, 0);
-	break;
-
-    case DL_UDQOS_REQ:
-	dlpi_error(q, us, d->dl_primitive, DL_BADQOSTYPE, 0);
-	break;
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_TEST_RES:
-    case DL_XID_RES:
-	break;
-#endif
-
-    default:
-	cmn_err(CE_CONT, "ppp: unknown dlpi prim 0x%x\n", d->dl_primitive);
-	/* fall through */
-    badprim:
-	dlpi_error(q, us, d->dl_primitive, DL_BADPRIM, 0);
-	break;
-    }
-    freemsg(mp);
-}
-
-static void
-dlpi_error(q, us, prim, err, uerr)
-    queue_t *q;
-    upperstr_t *us;
-    int prim, err, uerr;
-{
-    mblk_t *reply;
-    dl_error_ack_t *errp;
-
-    if (us->flags & US_DBGLOG)
-        DPRINT3("ppp/%d: dlpi error, prim=%x, err=%x\n", us->mn, prim, err);
-    reply = allocb(sizeof(dl_error_ack_t), BPRI_HI);
-    if (reply == 0)
-	return;			/* XXX should do bufcall */
-    reply->b_datap->db_type = M_PCPROTO;
-    errp = (dl_error_ack_t *) reply->b_wptr;
-    reply->b_wptr += sizeof(dl_error_ack_t);
-    errp->dl_primitive = DL_ERROR_ACK;
-    errp->dl_error_primitive = prim;
-    errp->dl_errno = err;
-    errp->dl_unix_errno = uerr;
-    qreply(q, reply);
-}
-
-static void
-dlpi_ok(q, prim)
-    queue_t *q;
-    int prim;
-{
-    mblk_t *reply;
-    dl_ok_ack_t *okp;
-
-    reply = allocb(sizeof(dl_ok_ack_t), BPRI_HI);
-    if (reply == 0)
-	return;			/* XXX should do bufcall */
-    reply->b_datap->db_type = M_PCPROTO;
-    okp = (dl_ok_ack_t *) reply->b_wptr;
-    reply->b_wptr += sizeof(dl_ok_ack_t);
-    okp->dl_primitive = DL_OK_ACK;
-    okp->dl_correct_primitive = prim;
-    qreply(q, reply);
-}
-#endif /* NO_DLPI */
-
-static int
-pass_packet(us, mp, outbound)
-    upperstr_t *us;
-    mblk_t *mp;
-    int outbound;
-{
-    int pass;
-    upperstr_t *ppa;
-
-    if ((ppa = us->ppa) == 0) {
-	freemsg(mp);
-	return 0;
-    }
-
-#ifdef FILTER_PACKETS
-    pass = ip_hard_filter(us, mp, outbound);
-#else
-    /*
-     * Here is where we might, in future, decide whether to pass
-     * or drop the packet, and whether it counts as link activity.
-     */
-    pass = 1;
-#endif /* FILTER_PACKETS */
-
-    if (pass < 0) {
-	/* pass only if link already up, and don't update time */
-	if (ppa->lowerq == 0) {
-	    freemsg(mp);
-	    return 0;
-	}
-	pass = 1;
-    } else if (pass) {
-	if (outbound)
-	    ppa->last_sent = time;
-	else
-	    ppa->last_recv = time;
-    }
-
-    return pass;
-}
-
-/*
- * We have some data to send down to the lower stream (or up the
- * control stream, if we don't have a lower stream attached).
- * Returns 1 if the message was dealt with, 0 if it wasn't able
- * to be sent on and should therefore be queued up.
- */
-static int
-send_data(mp, us)
-    mblk_t *mp;
-    upperstr_t *us;
-{
-    upperstr_t *ppa;
-
-    if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE)
-	return 0;
-    ppa = us->ppa;
-    if (ppa == 0 || us->npmode == NPMODE_DROP || us->npmode == NPMODE_ERROR) {
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("ppp/%d: dropping pkt (npmode=%d)\n", us->mn, us->npmode);
-	freemsg(mp);
-	return 1;
-    }
-    if (ppa->lowerq == 0) {
-	/* try to send it up the control stream */
-        if (bcanputnext(ppa->q, mp->b_band)) {
-	    /*
-	     * The message seems to get corrupted for some reason if
-	     * we just send the message up as it is, so we send a copy.
-	     */
-	    mblk_t *np = copymsg(mp);
-	    freemsg(mp);
-	    if (np != 0)
-		putnext(ppa->q, np);
-	    return 1;
-	}
-    } else {
-        if (bcanputnext(ppa->lowerq, mp->b_band)) {
-	    MT_ENTER(&ppa->stats_lock);
-	    ppa->stats.ppp_opackets++;
-	    ppa->stats.ppp_obytes += msgdsize(mp);
-#ifdef INCR_OPACKETS
-	    INCR_OPACKETS(ppa);
-#endif
-	    MT_EXIT(&ppa->stats_lock);
-	    /*
-	     * The lower queue is only ever detached while holding an
-	     * exclusive lock on the whole driver.  So we can be confident
-	     * that the lower queue is still there.
-	     */
-	    putnext(ppa->lowerq, mp);
-	    return 1;
-	}
-    }
-    us->flags |= US_BLOCKED;
-    return 0;
-}
-
-/*
- * Allocate a new PPA id and link this stream into the list of PPAs.
- * This procedure is called with an exclusive lock on all queues in
- * this driver.
- */
-static void
-new_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *up, **usp;
-    int ppa_id;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("new_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-    usp = &ppas;
-    ppa_id = 0;
-    while ((up = *usp) != 0 && ppa_id == up->ppa_id) {
-	++ppa_id;
-	usp = &up->nextppa;
-    }
-    us->ppa_id = ppa_id;
-    us->ppa = us;
-    us->next = 0;
-    us->nextppa = *usp;
-    *usp = us;
-    us->flags |= US_CONTROL;
-    us->npmode = NPMODE_PASS;
-
-    us->mtu = PPP_MTU;
-    us->mru = PPP_MRU;
-
-#ifdef SOL2
-    /*
-     * Create a kstats record for our statistics, so netstat -i works.
-     */
-    if (us->kstats == 0) {
-	char unit[32];
-
-	sprintf(unit, "ppp%d", us->ppa->ppa_id);
-	us->kstats = kstat_create("ppp", us->ppa->ppa_id, unit,
-				  "net", KSTAT_TYPE_NAMED, 4, 0);
-	if (us->kstats != 0) {
-	    kstat_named_t *kn = KSTAT_NAMED_PTR(us->kstats);
-
-	    strcpy(kn[0].name, "ipackets");
-	    kn[0].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[1].name, "ierrors");
-	    kn[1].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[2].name, "opackets");
-	    kn[2].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[3].name, "oerrors");
-	    kn[3].data_type = KSTAT_DATA_ULONG;
-	    kstat_install(us->kstats);
-	}
-    }
-#endif /* SOL2 */
-
-    *(int *)mp->b_cont->b_rptr = ppa_id;
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-static void
-attach_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *t;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("attach_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-#ifndef NO_DLPI
-    us->state = DL_UNBOUND;
-#endif
-    for (t = us->ppa; t->next != 0; t = t->next)
-	;
-    t->next = us;
-    us->next = 0;
-    if (mp->b_datap->db_type == M_IOCTL) {
-	mp->b_datap->db_type = M_IOCACK;
-	qreply(q, mp);
-    } else {
-#ifndef NO_DLPI
-	dlpi_ok(q, DL_ATTACH_REQ);
-#endif
-    }
-}
-
-static void
-detach_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *t;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("detach_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-    for (t = us->ppa; t->next != 0; t = t->next)
-	if (t->next == us) {
-	    t->next = us->next;
-	    break;
-	}
-    us->next = 0;
-    us->ppa = 0;
-#ifndef NO_DLPI
-    us->state = DL_UNATTACHED;
-    dlpi_ok(q, DL_DETACH_REQ);
-#endif
-}
-
-/*
- * We call this with qwriter in order to give the upper queue procedures
- * the guarantee that the lower queue is not going to go away while
- * they are executing.
- */
-static void
-detach_lower(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("detach_lower: q_ptr = 0!\n");
-	return;
-    }
-
-    LOCK_LOWER_W;
-    us->lowerq->q_ptr = 0;
-    RD(us->lowerq)->q_ptr = 0;
-    us->lowerq = 0;
-    UNLOCK_LOWER;
-
-    /* Unblock streams which now feed back up the control stream. */
-    qenable(us->q);
-
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-static int
-pppuwsrv(q)
-    queue_t *q;
-{
-    upperstr_t *us, *as;
-    mblk_t *mp;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppuwsrv: q_ptr = 0!\n");
-	return 0;
-    }
-
-    /*
-     * If this is a control stream, then this service procedure
-     * probably got enabled because of flow control in the lower
-     * stream being enabled (or because of the lower stream going
-     * away).  Therefore we enable the service procedure of all
-     * attached upper streams.
-     */
-    if (us->flags & US_CONTROL) {
-	for (as = us->next; as != 0; as = as->next)
-	    qenable(WR(as->q));
-    }
-
-    /* Try to send on any data queued here. */
-    us->flags &= ~US_BLOCKED;
-    while ((mp = getq(q)) != 0) {
-	if (!send_data(mp, us)) {
-	    putbq(q, mp);
-	    break;
-	}
-    }
-
-    return 0;
-}
-
-/* should never get called... */
-static int
-ppplwput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    putnext(q, mp);
-    return 0;
-}
-
-static int
-ppplwsrv(q)
-    queue_t *q;
-{
-    queue_t *uq;
-
-    /*
-     * Flow control has back-enabled this stream:
-     * enable the upper write service procedure for
-     * the upper control stream for this lower stream.
-     */
-    LOCK_LOWER_R;
-    uq = (queue_t *) q->q_ptr;
-    if (uq != 0)
-	qenable(uq);
-    UNLOCK_LOWER;
-    return 0;
-}
-
-/*
- * This should only get called for control streams.
- */
-static int
-pppurput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *ppa, *us;
-    int proto, len;
-    struct iocblk *iop;
-
-    ppa = (upperstr_t *) q->q_ptr;
-    if (ppa == 0) {
-	DPRINT("pppurput: q_ptr = 0!\n");
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_CTL:
-	MT_ENTER(&ppa->stats_lock);
-	switch (*mp->b_rptr) {
-	case PPPCTL_IERROR:
-#ifdef INCR_IERRORS
-	    INCR_IERRORS(ppa);
-#endif
-	    ppa->stats.ppp_ierrors++;
-	    break;
-	case PPPCTL_OERROR:
-#ifdef INCR_OERRORS
-	    INCR_OERRORS(ppa);
-#endif
-	    ppa->stats.ppp_oerrors++;
-	    break;
-	}
-	MT_EXIT(&ppa->stats_lock);
-	freemsg(mp);
-	break;
-
-    case M_IOCACK:
-    case M_IOCNAK:
-	/*
-	 * Attempt to match up the response with the stream
-	 * that the request came from.
-	 */
-	iop = (struct iocblk *) mp->b_rptr;
-	for (us = ppa; us != 0; us = us->next)
-	    if (us->ioc_id == iop->ioc_id)
-		break;
-	if (us == 0)
-	    freemsg(mp);
-	else
-	    putnext(us->q, mp);
-	break;
-
-    case M_HANGUP:
-	/*
-	 * The serial device has hung up.  We don't want to send
-	 * the M_HANGUP message up to pppd because that will stop
-	 * us from using the control stream any more.  Instead we
-	 * send a zero-length message as an end-of-file indication.
-	 */
-	freemsg(mp);
-	mp = allocb(1, BPRI_HI);
-	if (mp == 0) {
-	    DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
-	    break;
-	}
-	putnext(ppa->q, mp);
-	break;
-
-    default:
-	if (mp->b_datap->db_type == M_DATA) {
-	    len = msgdsize(mp);
-	    if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
-		PULLUP(mp, PPP_HDRLEN);
-		if (mp == 0) {
-		    DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len);
-		    break;
-		}
-	    }
-	    MT_ENTER(&ppa->stats_lock);
-	    ppa->stats.ppp_ipackets++;
-	    ppa->stats.ppp_ibytes += len;
-#ifdef INCR_IPACKETS
-	    INCR_IPACKETS(ppa);
-#endif
-	    MT_EXIT(&ppa->stats_lock);
-
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-
-#if defined(SOL2)
-	    /*
-	     * Should there be any promiscuous stream(s), send the data
-	     * up for each promiscuous stream that we recognize.
-	     */
-	    promisc_sendup(ppa, mp, proto, 1);
-#endif /* defined(SOL2) */
-
-	    if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
-		/*
-		 * A data packet for some network protocol.
-		 * Queue it on the upper stream for that protocol.
-		 * XXX could we just putnext it?  (would require thought)
-		 * The rblocked flag is there to ensure that we keep
-		 * messages in order for each network protocol.
-		 */
-		if (!pass_packet(us, mp, 0))
-		    break;
-		if (!us->rblocked && !canput(us->q))
-		    us->rblocked = 1;
-		if (!us->rblocked)
-		    putq(us->q, mp);
-		else
-		    putq(q, mp);
-		break;
-	    }
-	}
-	/*
-	 * A control frame, a frame for an unknown protocol,
-	 * or some other message type.
-	 * Send it up to pppd via the control stream.
-	 */
-	if (queclass(mp) == QPCTL || canputnext(ppa->q))
-	    putnext(ppa->q, mp);
-	else
-	    putq(q, mp);
-	break;
-    }
-
-    return 0;
-}
-
-static int
-pppursrv(q)
-    queue_t *q;
-{
-    upperstr_t *us, *as;
-    mblk_t *mp, *hdr;
-#ifndef NO_DLPI
-    dl_unitdata_ind_t *ud;
-#endif
-    int proto;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppursrv: q_ptr = 0!\n");
-	return 0;
-    }
-
-    if (us->flags & US_CONTROL) {
-	/*
-	 * A control stream.
-	 * If there is no lower queue attached, run the write service
-	 * routines of other upper streams attached to this PPA.
-	 */
-	if (us->lowerq == 0) {
-	    as = us;
-	    do {
-		if (as->flags & US_BLOCKED)
-		    qenable(WR(as->q));
-		as = as->next;
-	    } while (as != 0);
-	}
-
-	/*
-	 * Messages get queued on this stream's read queue if they
-	 * can't be queued on the read queue of the attached stream
-	 * that they are destined for.  This is for flow control -
-	 * when this queue fills up, the lower read put procedure will
-	 * queue messages there and the flow control will propagate
-	 * down from there.
-	 */
-	while ((mp = getq(q)) != 0) {
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-	    if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) {
-		if (!canput(as->q))
-		    break;
-		putq(as->q, mp);
-	    } else {
-		if (!canputnext(q))
-		    break;
-		putnext(q, mp);
-	    }
-	}
-	if (mp) {
-	    putbq(q, mp);
-	} else {
-	    /* can now put stuff directly on network protocol streams again */
-	    for (as = us->next; as != 0; as = as->next)
-		as->rblocked = 0;
-	}
-
-	/*
-	 * If this stream has a lower stream attached,
-	 * enable the read queue's service routine.
-	 * XXX we should really only do this if the queue length
-	 * has dropped below the low-water mark.
-	 */
-	if (us->lowerq != 0)
-	    qenable(RD(us->lowerq));
-		
-    } else {
-	/*
-	 * A network protocol stream.  Put a DLPI header on each
-	 * packet and send it on.
-	 * (Actually, it seems that the IP module will happily
-	 * accept M_DATA messages without the DL_UNITDATA_IND header.)
-	 */
-	while ((mp = getq(q)) != 0) {
-	    if (!canputnext(q)) {
-		putbq(q, mp);
-		break;
-	    }
-#ifndef NO_DLPI
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-	    mp->b_rptr += PPP_HDRLEN;
-	    hdr = allocb(sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint),
-			 BPRI_MED);
-	    if (hdr == 0) {
-		/* XXX should put it back and use bufcall */
-		freemsg(mp);
-		continue;
-	    }
-	    hdr->b_datap->db_type = M_PROTO;
-	    ud = (dl_unitdata_ind_t *) hdr->b_wptr;
-	    hdr->b_wptr += sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint);
-	    hdr->b_cont = mp;
-	    ud->dl_primitive = DL_UNITDATA_IND;
-	    ud->dl_dest_addr_length = sizeof(uint);
-	    ud->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
-	    ud->dl_src_addr_length = sizeof(uint);
-	    ud->dl_src_addr_offset = ud->dl_dest_addr_offset + sizeof(uint);
-#if DL_CURRENT_VERSION >= 2
-	    ud->dl_group_address = 0;
-#endif
-	    /* Send the DLPI client the data with the SAP they requested,
-	       (e.g. ETHERTYPE_IP) rather than the PPP protocol number
-	       (e.g. PPP_IP) */
-	    ((uint *)(ud + 1))[0] = us->req_sap;	/* dest SAP */
-	    ((uint *)(ud + 1))[1] = us->req_sap;	/* src SAP */
-	    putnext(q, hdr);
-#else /* NO_DLPI */
-	    putnext(q, mp);
-#endif /* NO_DLPI */
-	}
-	/*
-	 * Now that we have consumed some packets from this queue,
-	 * enable the control stream's read service routine so that we
-	 * can process any packets for us that might have got queued
-	 * there for flow control reasons.
-	 */
-	if (us->ppa)
-	    qenable(us->ppa->q);
-    }
-
-    return 0;
-}
-
-static upperstr_t *
-find_dest(ppa, proto)
-    upperstr_t *ppa;
-    int proto;
-{
-    upperstr_t *us;
-
-    for (us = ppa->next; us != 0; us = us->next)
-	if (proto == us->sap)
-	    break;
-    return us;
-}
-
-#if defined (SOL2)
-/*
- * Test upstream promiscuous conditions. As of now, only pass IPv4 and
- * Ipv6 packets upstream (let PPP packets be decoded elsewhere).
- */
-static upperstr_t *
-find_promisc(us, proto)
-    upperstr_t *us;
-    int proto;
-{
-
-    if ((proto != PPP_IP) && (proto != PPP_IPV6))
-	return (upperstr_t *)0;
-
-    for ( ; us; us = us->next) {
-	if ((us->flags & US_PROMISC) && (us->state == DL_IDLE))
-	    return us;
-    }
-
-    return (upperstr_t *)0;
-}
-
-/*
- * Prepend an empty Ethernet header to msg for snoop, et al.
- */
-static mblk_t *
-prepend_ether(us, mp, proto)
-    upperstr_t *us;
-    mblk_t *mp;
-    int proto;
-{
-    mblk_t *eh;
-    int type;
-
-    if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) {
-	freemsg(mp);
-	return (mblk_t *)0;
-    }
-
-    if (proto == PPP_IP)
-	type = ETHERTYPE_IP;
-    else if (proto == PPP_IPV6)
-	type = ETHERTYPE_IPV6;
-    else 
-	type = proto;	    /* What else? Let decoder decide */
-
-    eh->b_wptr += sizeof(struct ether_header);
-    bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header));
-    ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type);
-    eh->b_cont = mp;
-    return (eh);
-}
-
-/*
- * Prepend DL_UNITDATA_IND mblk to msg
- */
-static mblk_t *
-prepend_udind(us, mp, proto)
-    upperstr_t *us;
-    mblk_t *mp;
-    int proto;
-{
-    dl_unitdata_ind_t *dlu;
-    mblk_t *dh;
-    size_t size;
-
-    size = sizeof(dl_unitdata_ind_t);
-    if ((dh = allocb(size, BPRI_MED)) == 0) {
-	freemsg(mp);
-	return (mblk_t *)0;
-    }
-
-    dh->b_datap->db_type = M_PROTO;
-    dh->b_wptr = dh->b_datap->db_lim;
-    dh->b_rptr = dh->b_wptr - size;
-
-    dlu = (dl_unitdata_ind_t *)dh->b_rptr;
-    dlu->dl_primitive = DL_UNITDATA_IND;
-    dlu->dl_dest_addr_length = 0;
-    dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
-    dlu->dl_src_addr_length = 0;
-    dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t);
-    dlu->dl_group_address = 0;
-
-    dh->b_cont = mp;
-    return (dh);
-}
-
-/*
- * For any recognized promiscuous streams, send data upstream
- */
-static void
-promisc_sendup(ppa, mp, proto, skip)
-    upperstr_t *ppa;
-    mblk_t *mp;
-    int proto, skip;
-{
-    mblk_t *dup_mp, *dup_dup_mp;
-    upperstr_t *prus, *nprus;
-
-    if ((prus = find_promisc(ppa, proto)) != 0) {
-	if (dup_mp = dupmsg(mp)) {
-
-	    if (skip)
-		dup_mp->b_rptr += PPP_HDRLEN;
-
-	    for ( ; nprus = find_promisc(prus->next, proto); 
-		    prus = nprus) {
-
-		if (dup_dup_mp = dupmsg(dup_mp)) {
-		    if (canputnext(prus->q)) {
-			if (prus->flags & US_RAWDATA) {
-			    dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto);
-			    putnext(prus->q, dup_dup_mp);
-			} else {
-			    dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto);
-			    putnext(prus->q, dup_dup_mp);
-			}
-		    } else {
-			DPRINT("ppp_urput: data to promisc q dropped\n");
-			freemsg(dup_dup_mp);
-		    }
-		}
-	    }
-
-	    if (canputnext(prus->q)) {
-		if (prus->flags & US_RAWDATA) {
-		    dup_mp = prepend_ether(prus, dup_mp, proto);
-		    putnext(prus->q, dup_mp);
-		} else {
-		    dup_mp = prepend_udind(prus, dup_mp, proto);
-		    putnext(prus->q, dup_mp);
-		}
-	    } else {
-		DPRINT("ppp_urput: data to promisc q dropped\n");
-		freemsg(dup_mp);
-	    }
-	}
-    }
-}
-#endif /* defined(SOL2) */
-
-/*
- * We simply put the message on to the associated upper control stream
- * (either here or in ppplrsrv).  That way we enter the perimeters
- * before looking through the list of attached streams to decide which
- * stream it should go up.
- */
-static int
-ppplrput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    queue_t *uq;
-    struct iocblk *iop;
-
-    switch (mp->b_datap->db_type) {
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	iop->ioc_error = EINVAL;
-	mp->b_datap->db_type = M_IOCNAK;
-	qreply(q, mp);
-	return 0;
-    case M_FLUSH:
-	if (*mp->b_rptr & FLUSHR)
-	    flushq(q, FLUSHDATA);
-	if (*mp->b_rptr & FLUSHW) {
-	    *mp->b_rptr &= ~FLUSHR;
-	    qreply(q, mp);
-	} else
-	    freemsg(mp);
-	return 0;
-    }
-
-    /*
-     * If we can't get the lower lock straight away, queue this one
-     * rather than blocking, to avoid the possibility of deadlock.
-     */
-    if (!TRYLOCK_LOWER_R) {
-	putq(q, mp);
-	return 0;
-    }
-
-    /*
-     * Check that we're still connected to the driver.
-     */
-    uq = (queue_t *) q->q_ptr;
-    if (uq == 0) {
-	UNLOCK_LOWER;
-	DPRINT1("ppplrput: q = %x, uq = 0??\n", q);
-	freemsg(mp);
-	return 0;
-    }
-
-    /*
-     * Try to forward the message to the put routine for the upper
-     * control stream for this lower stream.
-     * If there are already messages queued here, queue this one so
-     * they don't get out of order.
-     */
-    if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq)))
-	put(uq, mp);
-    else
-	putq(q, mp);
-
-    UNLOCK_LOWER;
-    return 0;
-}
-
-static int
-ppplrsrv(q)
-    queue_t *q;
-{
-    mblk_t *mp;
-    queue_t *uq;
-
-    /*
-     * Packets get queued here for flow control reasons
-     * or if the lrput routine couldn't get the lower lock
-     * without blocking.
-     */
-    LOCK_LOWER_R;
-    uq = (queue_t *) q->q_ptr;
-    if (uq == 0) {
-	UNLOCK_LOWER;
-	flushq(q, FLUSHALL);
-	DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q);
-	return 0;
-    }
-    while ((mp = getq(q)) != 0) {
-	if (queclass(mp) == QPCTL || canput(uq))
-	    put(uq, mp);
-	else {
-	    putbq(q, mp);
-	    break;
-	}
-    }
-    UNLOCK_LOWER;
-    return 0;
-}
-
-static int
-putctl2(q, type, code, val)
-    queue_t *q;
-    int type, code, val;
-{
-    mblk_t *mp;
-
-    mp = allocb(2, BPRI_HI);
-    if (mp == 0)
-	return 0;
-    mp->b_datap->db_type = type;
-    mp->b_wptr[0] = code;
-    mp->b_wptr[1] = val;
-    mp->b_wptr += 2;
-    putnext(q, mp);
-    return 1;
-}
-
-static int
-putctl4(q, type, code, val)
-    queue_t *q;
-    int type, code, val;
-{
-    mblk_t *mp;
-
-    mp = allocb(4, BPRI_HI);
-    if (mp == 0)
-	return 0;
-    mp->b_datap->db_type = type;
-    mp->b_wptr[0] = code;
-    ((short *)mp->b_wptr)[1] = val;
-    mp->b_wptr += 4;
-    putnext(q, mp);
-    return 1;
-}
-
-static void
-debug_dump(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us;
-    queue_t *uq, *lq;
-
-    DPRINT("ppp upper streams:\n");
-    for (us = minor_devs; us != 0; us = us->nextmn) {
-	uq = us->q;
-	DPRINT3(" %d: q=%x rlev=%d",
-		us->mn, uq, (uq? qsize(uq): 0));
-	DPRINT3(" wlev=%d flags=0x%b", (uq? qsize(WR(uq)): 0),
-		us->flags, "\020\1priv\2control\3blocked\4last");
-	DPRINT3(" state=%x sap=%x req_sap=%x", us->state, us->sap,
-		us->req_sap);
-	if (us->ppa == 0)
-	    DPRINT(" ppa=?\n");
-	else
-	    DPRINT1(" ppa=%d\n", us->ppa->ppa_id);
-	if (us->flags & US_CONTROL) {
-	    lq = us->lowerq;
-	    DPRINT3("    control for %d lq=%x rlev=%d",
-		    us->ppa_id, lq, (lq? qsize(RD(lq)): 0));
-	    DPRINT3(" wlev=%d mru=%d mtu=%d\n",
-		    (lq? qsize(lq): 0), us->mru, us->mtu);
-	}
-    }
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-#ifdef FILTER_PACKETS
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <netinet/tcp.h>
-
-#define MAX_IPHDR    128     /* max TCP/IP header size */
-
-
-/* The following table contains a hard-coded list of protocol/port pairs.
- * Any matching packets are either discarded unconditionally, or, 
- * if ok_if_link_up is non-zero when a connection does not currently exist
- * (i.e., they go through if the connection is present, but never initiate
- * a dial-out).
- * This idea came from a post by dm@garage.uun.org (David Mazieres)
- */
-static struct pktfilt_tab { 
-	int proto; 
-	u_short port; 
-	u_short ok_if_link_up; 
-} pktfilt_tab[] = {
-	{ IPPROTO_UDP,	520,	1 },	/* RIP, ok to pass if link is up */
-	{ IPPROTO_UDP,	123,	1 },	/* NTP, don't keep up the link for it */
-	{ -1, 		0,	0 }	/* terminator entry has port == -1 */
-};
-
-
-static int
-ip_hard_filter(us, mp, outbound)
-    upperstr_t *us;
-    mblk_t *mp;
-    int outbound;
-{
-    struct ip *ip;
-    struct pktfilt_tab *pft;
-    mblk_t *temp_mp;
-    int proto;
-    int len, hlen;
-
-
-    /* Note, the PPP header has already been pulled up in all cases */
-    proto = PPP_PROTOCOL(mp->b_rptr);
-    if (us->flags & US_DBGLOG)
-        DPRINT3("ppp/%d: filter, proto=0x%x, out=%d\n", us->mn, proto, outbound);
-
-    switch (proto)
-    {
-    case PPP_IP:
-	if ((mp->b_wptr - mp->b_rptr) == PPP_HDRLEN && mp->b_cont != 0) {
-	    temp_mp = mp->b_cont;
-    	    len = msgdsize(temp_mp);
-	    hlen = (len < MAX_IPHDR) ? len : MAX_IPHDR;
-	    PULLUP(temp_mp, hlen);
-	    if (temp_mp == 0) {
-		DPRINT2("ppp/%d: filter, pullup next failed, len=%d\n", 
-			us->mn, hlen);
-		mp->b_cont = 0;		/* PULLUP() freed the rest */
-	        freemsg(mp);
-	        return 0;
-	    }
-	    ip = (struct ip *)mp->b_cont->b_rptr;
-	}
-	else {
-	    len = msgdsize(mp);
-	    hlen = (len < (PPP_HDRLEN+MAX_IPHDR)) ? len : (PPP_HDRLEN+MAX_IPHDR);
-	    PULLUP(mp, hlen);
-	    if (mp == 0) {
-		DPRINT2("ppp/%d: filter, pullup failed, len=%d\n", 
-			us->mn, hlen);
-	        return 0;
-	    }
-	    ip = (struct ip *)(mp->b_rptr + PPP_HDRLEN);
-	}
-
-	/* For IP traffic, certain packets (e.g., RIP) may be either
-	 *   1.  ignored - dropped completely
-	 *   2.  will not initiate a connection, but
-	 *       will be passed if a connection is currently up.
-	 */
-	for (pft=pktfilt_tab; pft->proto != -1; pft++) {
-	    if (ip->ip_p == pft->proto) {
-		switch(pft->proto) {
-		case IPPROTO_UDP:
-		    if (((struct udphdr *) &((int *)ip)[ip->ip_hl])->uh_dport
-				== htons(pft->port)) goto endfor;
-		    break;
-		case IPPROTO_TCP:
-		    if (((struct tcphdr *) &((int *)ip)[ip->ip_hl])->th_dport
-				== htons(pft->port)) goto endfor;
-		    break;
-		}	
-	    }
-	}
-	endfor:
-	if (pft->proto != -1) {
-	    if (us->flags & US_DBGLOG)
-		DPRINT3("ppp/%d: found IP pkt, proto=0x%x (%d)\n", 
-				us->mn, pft->proto, pft->port);
-	    /* Discard if not connected, or if not pass_with_link_up */
-	    /* else, if link is up let go by, but don't update time */
-	    return pft->ok_if_link_up? -1: 0;
-	}
-        break;
-    } /* end switch (proto) */
-
-    return 1;
-}
-#endif /* FILTER_PACKETS */
-
diff --git a/mdk-stage1/ppp/modules/ppp_ahdlc.c b/mdk-stage1/ppp/modules/ppp_ahdlc.c
deleted file mode 100644
index d0b961258..000000000
--- a/mdk-stage1/ppp/modules/ppp_ahdlc.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * ppp_ahdlc.c - STREAMS module for doing PPP asynchronous HDLC.
- *
- * Re-written by Adi Masputra <adi.masputra@sun.com>, based on 
- * the original ppp_ahdlc.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT.  SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stream.h>
-#include <sys/errno.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/kmem.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Right now, mutex is only enabled for Solaris 2.x
- */
-#if defined(SOL2)
-#define USE_MUTEX
-#endif /* SOL2 */
-
-/*
- * intpointer_t and uintpointer_t are signed and unsigned integer types 
- * large enough to hold any data pointer; that is, data pointers can be 
- * assigned into or from these integer types without losing precision.
- * On recent Solaris releases, these types are defined in sys/int_types.h,
- * but not on SunOS 4.x or the earlier Solaris versions.
- */
-#if defined(_LP64) || defined(_I32LPx)
-typedef long                    intpointer_t;
-typedef unsigned long           uintpointer_t;
-#else
-typedef int                     intpointer_t;
-typedef unsigned int            uintpointer_t;
-#endif
-
-MOD_OPEN_DECL(ahdlc_open);
-MOD_CLOSE_DECL(ahdlc_close);
-static int ahdlc_wput __P((queue_t *, mblk_t *));
-static int ahdlc_rput __P((queue_t *, mblk_t *));
-static void ahdlc_encode __P((queue_t *, mblk_t *));
-static void ahdlc_decode __P((queue_t *, mblk_t *));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-#if defined(SOL2)
-/*
- * Don't send HDLC start flag is last transmit is within 1.5 seconds -
- * FLAG_TIME is defined is microseconds
- */
-#define FLAG_TIME   1500
-#define ABS(x)	    (x >= 0 ? x : (-x))
-#endif /* SOL2 */
-
-/*
- * Extract byte i of message mp 
- */
-#define MSG_BYTE(mp, i)	((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
-			 msg_byte((mp), (i)))
-
-/* 
- * Is this LCP packet one we have to transmit using LCP defaults? 
- */
-#define LCP_USE_DFLT(mp)	(1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-/*
- * Standard STREAMS declarations
- */
-static struct module_info minfo = {
-    0x7d23, "ppp_ahdl", 0, INFPSZ, 32768, 512
-};
-
-static struct qinit rinit = {
-    ahdlc_rput, NULL, ahdlc_open, ahdlc_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
-    ahdlc_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int phdldevflag = 0;
-#define ppp_ahdlcinfo phdlinfo
-#endif /* defined(SVR4) && !defined(SOL2) */
-
-struct streamtab ppp_ahdlcinfo = {
-    &rinit,			    /* ptr to st_rdinit */
-    &winit,			    /* ptr to st_wrinit */
-    NULL,			    /* ptr to st_muxrinit */
-    NULL,			    /* ptr to st_muxwinit */
-#if defined(SUNOS4)
-    NULL			    /* ptr to ptr to st_modlist */
-#endif /* SUNOS4 */
-};
-
-#if defined(SUNOS4)
-int ppp_ahdlc_count = 0;	    /* open counter */
-#endif /* SUNOS4 */
-
-/*
- * Per-stream state structure
- */
-typedef struct ahdlc_state {
-#if defined(USE_MUTEX)
-    kmutex_t	    lock;		    /* lock for this structure */
-#endif /* USE_MUTEX */
-    int		    flags;		    /* link flags */
-    mblk_t	    *rx_buf;		    /* ptr to receive buffer */
-    int		    rx_buf_size;	    /* receive buffer size */
-    ushort_t	    infcs;		    /* calculated rx HDLC FCS */
-    u_int32_t	    xaccm[8];		    /* 256-bit xmit ACCM */
-    u_int32_t	    raccm;		    /* 32-bit rcv ACCM */
-    int		    mtu;		    /* interface MTU */
-    int		    mru;		    /* link MRU */
-    int		    unit;		    /* current PPP unit number */
-    struct pppstat  stats;		    /* statistic structure */
-#if defined(SOL2)
-    clock_t	    flag_time;		    /* time in usec between flags */
-    clock_t	    lbolt;		    /* last updated lbolt */
-#endif /* SOL2 */
-} ahdlc_state_t;
-
-/*
- * Values for flags 
- */
-#define ESCAPED		0x100	/* last saw escape char on input */
-#define IFLUSH		0x200	/* flushing input due to error */
-
-/* 
- * RCV_B7_1, etc., defined in net/pppio.h, are stored in flags also. 
- */
-#define RCV_FLAGS	(RCV_B7_1|RCV_B7_0|RCV_ODDP|RCV_EVNP)
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
-	0x0000,	0x1189,	0x2312,	0x329b,	0x4624,	0x57ad,	0x6536,	0x74bf,
-	0x8c48,	0x9dc1,	0xaf5a,	0xbed3,	0xca6c,	0xdbe5,	0xe97e,	0xf8f7,
-	0x1081,	0x0108,	0x3393,	0x221a,	0x56a5,	0x472c,	0x75b7,	0x643e,
-	0x9cc9,	0x8d40,	0xbfdb,	0xae52,	0xdaed,	0xcb64,	0xf9ff,	0xe876,
-	0x2102,	0x308b,	0x0210,	0x1399,	0x6726,	0x76af,	0x4434,	0x55bd,
-	0xad4a,	0xbcc3,	0x8e58,	0x9fd1,	0xeb6e,	0xfae7,	0xc87c,	0xd9f5,
-	0x3183,	0x200a,	0x1291,	0x0318,	0x77a7,	0x662e,	0x54b5,	0x453c,
-	0xbdcb,	0xac42,	0x9ed9,	0x8f50,	0xfbef,	0xea66,	0xd8fd,	0xc974,
-	0x4204,	0x538d,	0x6116,	0x709f,	0x0420,	0x15a9,	0x2732,	0x36bb,
-	0xce4c,	0xdfc5,	0xed5e,	0xfcd7,	0x8868,	0x99e1,	0xab7a,	0xbaf3,
-	0x5285,	0x430c,	0x7197,	0x601e,	0x14a1,	0x0528,	0x37b3,	0x263a,
-	0xdecd,	0xcf44,	0xfddf,	0xec56,	0x98e9,	0x8960,	0xbbfb,	0xaa72,
-	0x6306,	0x728f,	0x4014,	0x519d,	0x2522,	0x34ab,	0x0630,	0x17b9,
-	0xef4e,	0xfec7,	0xcc5c,	0xddd5,	0xa96a,	0xb8e3,	0x8a78,	0x9bf1,
-	0x7387,	0x620e,	0x5095,	0x411c,	0x35a3,	0x242a,	0x16b1,	0x0738,
-	0xffcf,	0xee46,	0xdcdd,	0xcd54,	0xb9eb,	0xa862,	0x9af9,	0x8b70,
-	0x8408,	0x9581,	0xa71a,	0xb693,	0xc22c,	0xd3a5,	0xe13e,	0xf0b7,
-	0x0840,	0x19c9,	0x2b52,	0x3adb,	0x4e64,	0x5fed,	0x6d76,	0x7cff,
-	0x9489,	0x8500,	0xb79b,	0xa612,	0xd2ad,	0xc324,	0xf1bf,	0xe036,
-	0x18c1,	0x0948,	0x3bd3,	0x2a5a,	0x5ee5,	0x4f6c,	0x7df7,	0x6c7e,
-	0xa50a,	0xb483,	0x8618,	0x9791,	0xe32e,	0xf2a7,	0xc03c,	0xd1b5,
-	0x2942,	0x38cb,	0x0a50,	0x1bd9,	0x6f66,	0x7eef,	0x4c74,	0x5dfd,
-	0xb58b,	0xa402,	0x9699,	0x8710,	0xf3af,	0xe226,	0xd0bd,	0xc134,
-	0x39c3,	0x284a,	0x1ad1,	0x0b58,	0x7fe7,	0x6e6e,	0x5cf5,	0x4d7c,
-	0xc60c,	0xd785,	0xe51e,	0xf497,	0x8028,	0x91a1,	0xa33a,	0xb2b3,
-	0x4a44,	0x5bcd,	0x6956,	0x78df,	0x0c60,	0x1de9,	0x2f72,	0x3efb,
-	0xd68d,	0xc704,	0xf59f,	0xe416,	0x90a9,	0x8120,	0xb3bb,	0xa232,
-	0x5ac5,	0x4b4c,	0x79d7,	0x685e,	0x1ce1,	0x0d68,	0x3ff3,	0x2e7a,
-	0xe70e,	0xf687,	0xc41c,	0xd595,	0xa12a,	0xb0a3,	0x8238,	0x93b1,
-	0x6b46,	0x7acf,	0x4854,	0x59dd,	0x2d62,	0x3ceb,	0x0e70,	0x1ff9,
-	0xf78f,	0xe606,	0xd49d,	0xc514,	0xb1ab,	0xa022,	0x92b9,	0x8330,
-	0x7bc7,	0x6a4e,	0x58d5,	0x495c,	0x3de3,	0x2c6a,	0x1ef1,	0x0f78
-};
-
-static u_int32_t paritytab[8] =
-{
-	0x96696996, 0x69969669, 0x69969669, 0x96696996,
-	0x69969669, 0x96696996, 0x96696996, 0x69969669
-};
-
-/*
- * STREAMS module open (entry) point
- */
-MOD_OPEN(ahdlc_open)
-{
-    ahdlc_state_t   *state;
-
-    /*
-     * Return if it's already opened
-     */
-    if (q->q_ptr) {
-	return 0;
-    }
-
-    /*
-     * This can only be opened as a module
-     */
-    if (sflag != MODOPEN) {
-	return 0;
-    }
-
-    state = (ahdlc_state_t *) ALLOC_NOSLEEP(sizeof(ahdlc_state_t));
-    if (state == 0)
-	OPEN_ERROR(ENOSR);
-    bzero((caddr_t) state, sizeof(ahdlc_state_t));
-
-    q->q_ptr	 = (caddr_t) state;
-    WR(q)->q_ptr = (caddr_t) state;
-
-#if defined(USE_MUTEX)
-    mutex_init(&state->lock, NULL, MUTEX_DEFAULT, NULL);
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    state->xaccm[0] = ~0;	    /* escape 0x00 through 0x1f */
-    state->xaccm[3] = 0x60000000;   /* escape 0x7d and 0x7e */
-    state->mru	    = PPP_MRU;	    /* default of 1500 bytes */
-#if defined(SOL2)
-    state->flag_time = drv_usectohz(FLAG_TIME);
-#endif /* SOL2 */
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */	
-
-#if defined(SUNOS4)
-    ppp_ahdlc_count++;
-#endif /* SUNOS4 */
-
-    qprocson(q);
-    
-    return 0;
-}
-
-/*
- * STREAMS module close (exit) point
- */
-MOD_CLOSE(ahdlc_close)
-{
-    ahdlc_state_t   *state;
-
-    qprocsoff(q);
-
-    state = (ahdlc_state_t *) q->q_ptr;
-
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_close\n");
-	return 0;
-    }
-
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    if (state->rx_buf != 0) {
-	freemsg(state->rx_buf);
-	state->rx_buf = 0;
-    }
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-    mutex_destroy(&state->lock);
-#endif /* USE_MUTEX */
-
-    FREE(q->q_ptr, sizeof(ahdlc_state_t));
-    q->q_ptr	     = NULL;
-    OTHERQ(q)->q_ptr = NULL;
-
-#if defined(SUNOS4)
-    if (ppp_ahdlc_count)
-	ppp_ahdlc_count--;
-#endif /* SUNOS4 */
-    
-    return 0;
-}
-
-/*
- * Write side put routine
- */
-static int
-ahdlc_wput(q, mp)
-    queue_t	*q;
-    mblk_t	*mp;
-{
-    ahdlc_state_t  	*state;
-    struct iocblk  	*iop;
-    int		   	error;
-    mblk_t	   	*np;
-    struct ppp_stats	*psp;
-
-    state = (ahdlc_state_t *) q->q_ptr;
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_wput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	/*
-	 * A data packet - do character-stuffing and FCS, and
-	 * send it onwards.
-	 */
-	ahdlc_encode(q, mp);
-	freemsg(mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	switch (iop->ioc_cmd) {
-	case PPPIO_XACCM:
-	    if ((iop->ioc_count < sizeof(u_int32_t)) || 
-		(iop->ioc_count > sizeof(ext_accm))) {
-		break;
-	    }
-	    if (mp->b_cont == 0) {
-		DPRINT1("ahdlc_wput/%d: PPPIO_XACCM b_cont = 0!\n", state->unit);
-		break;
-	    }
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)state->xaccm,
-		  iop->ioc_count);
-	    state->xaccm[2] &= ~0x40000000;	/* don't escape 0x5e */
-	    state->xaccm[3] |= 0x60000000;	/* do escape 0x7d, 0x7e */
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_RACCM:
-	    if (iop->ioc_count != sizeof(u_int32_t))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ahdlc_wput/%d: PPPIO_RACCM b_cont = 0!\n", state->unit);
-		break;
-	    }
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)&state->raccm,
-		  sizeof(u_int32_t));
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_GCLEAN:
-	    np = allocb(sizeof(int), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    *(int *)np->b_wptr = state->flags & RCV_FLAGS;
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    np->b_wptr += sizeof(int);
-	    iop->ioc_count = sizeof(int);
-	    error = 0;
-	    break;
-
-	case PPPIO_GETSTAT:
-	    np = allocb(sizeof(struct ppp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    psp = (struct ppp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_stats);
-	    bzero((caddr_t)psp, sizeof(struct ppp_stats));
-	    psp->p = state->stats;
-	    iop->ioc_count = sizeof(struct ppp_stats);
-	    error = 0;
-	    break;
-
-	case PPPIO_LASTMOD:
-	    /* we knew this anyway */
-	    error = 0;
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_count = 0;
-	    iop->ioc_error = error;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_CTL:
-	switch (*mp->b_rptr) {
-	case PPPCTL_MTU:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->mtu = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    freemsg(mp);
-	    break;
-	case PPPCTL_MRU:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->mru = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    freemsg(mp);
-	    break;
-	case PPPCTL_UNIT:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->unit = mp->b_rptr[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    break;
-	default:
-	    putnext(q, mp);
-	}
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-/*
- * Read side put routine
- */
-static int
-ahdlc_rput(q, mp)
-    queue_t *q;
-    mblk_t  *mp;
-{
-    ahdlc_state_t *state;
-
-    state = (ahdlc_state_t *) q->q_ptr;
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_rput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	ahdlc_decode(q, mp);
-	freemsg(mp);
-	break;
-
-    case M_HANGUP:
-#if defined(USE_MUTEX)
-	mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	if (state->rx_buf != 0) {
-	    /* XXX would like to send this up for debugging */
-	    freemsg(state->rx_buf);
-	    state->rx_buf = 0;
-	}
-	state->flags = IFLUSH;
-#if defined(USE_MUTEX)
-	mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-    return 0;
-}
-
-/*
- * Extract bit c from map m, to determine if c needs to be escaped
- */
-#define IN_TX_MAP(c, m)	((m)[(c) >> 5] & (1 << ((c) & 0x1f)))
-
-static void
-ahdlc_encode(q, mp)
-    queue_t	*q;
-    mblk_t	*mp;
-{
-    ahdlc_state_t	*state;
-    u_int32_t		*xaccm, loc_xaccm[8];
-    ushort_t		fcs;
-    size_t		outmp_len;
-    mblk_t		*outmp, *tmp;
-    uchar_t		*dp, fcs_val;
-    int			is_lcp, code;
-#if defined(SOL2)
-    clock_t		lbolt;
-#endif /* SOL2 */
-
-    if (msgdsize(mp) < 4) {
-	return;
-    }
-
-    state = (ahdlc_state_t *)q->q_ptr;
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    /*
-     * Allocate an output buffer large enough to handle a case where all
-     * characters need to be escaped
-     */
-    outmp_len = (msgdsize(mp)	 << 1) +		/* input block x 2 */
-		(sizeof(fcs)	 << 2) +		/* HDLC FCS x 4 */
-		(sizeof(uchar_t) << 1);			/* HDLC flags x 2 */
-
-    outmp = allocb(outmp_len, BPRI_MED);
-    if (outmp == NULL) {
-	state->stats.ppp_oerrors++;
-#if defined(USE_MUTEX)
-	mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-	return;
-    }
-
-#if defined(SOL2)
-    /*
-     * Check if our last transmit happenned within flag_time, using
-     * the system's LBOLT value in clock ticks
-     */
-    if (drv_getparm(LBOLT, &lbolt) != -1) {
-	if (ABS((clock_t)lbolt - state->lbolt) > state->flag_time) {
-	    *outmp->b_wptr++ = PPP_FLAG;
-	} 
-	state->lbolt = lbolt;
-    } else {
-	*outmp->b_wptr++ = PPP_FLAG;
-    }
-#else
-    /*
-     * If the driver below still has a message to process, skip the
-     * HDLC flag, otherwise, put one in the beginning
-     */
-    if (qsize(q->q_next) == 0) {
-	*outmp->b_wptr++ = PPP_FLAG;
-    }
-#endif
-
-    /*
-     * All control characters must be escaped for LCP packets with code
-     * values between 1 (Conf-Req) and 7 (Code-Rej).
-     */
-    is_lcp = ((MSG_BYTE(mp, 0) == PPP_ALLSTATIONS) && 
-	      (MSG_BYTE(mp, 1) == PPP_UI) && 
-	      (MSG_BYTE(mp, 2) == (PPP_LCP >> 8)) &&
-	      (MSG_BYTE(mp, 3) == (PPP_LCP & 0xff)) &&
-	      LCP_USE_DFLT(mp));
-
-    xaccm = state->xaccm;
-    if (is_lcp) {
-	bcopy((caddr_t)state->xaccm, (caddr_t)loc_xaccm, sizeof(loc_xaccm));
-	loc_xaccm[0] = ~0;	/* force escape on 0x00 through 0x1f */
-	xaccm = loc_xaccm;
-    }
-
-    fcs = PPP_INITFCS;		/* Initial FCS is 0xffff */
-
-    /*
-     * Process this block and the rest (if any) attached to the this one
-     */
-    for (tmp = mp; tmp; tmp = tmp->b_cont) {
-	if (tmp->b_datap->db_type == M_DATA) {
-	    for (dp = tmp->b_rptr; dp < tmp->b_wptr; dp++) {
-		fcs = PPP_FCS(fcs, *dp);
-		if (IN_TX_MAP(*dp, xaccm)) {
-		    *outmp->b_wptr++ = PPP_ESCAPE;
-		    *outmp->b_wptr++ = *dp ^ PPP_TRANS;
-		} else {
-		    *outmp->b_wptr++ = *dp;
-		}
-	    }
-	} else {
-	    continue;	/* skip if db_type is something other than M_DATA */
-	}
-    }
-
-    /*
-     * Append the HDLC FCS, making sure that escaping is done on any
-     * necessary bytes
-     */
-    fcs_val = (fcs ^ 0xffff) & 0xff;
-    if (IN_TX_MAP(fcs_val, xaccm)) {
-	*outmp->b_wptr++ = PPP_ESCAPE;
-	*outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
-    } else {
-	*outmp->b_wptr++ = fcs_val;
-    }
-
-    fcs_val = ((fcs ^ 0xffff) >> 8) & 0xff;
-    if (IN_TX_MAP(fcs_val, xaccm)) {
-	*outmp->b_wptr++ = PPP_ESCAPE;
-	*outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
-    } else {
-	*outmp->b_wptr++ = fcs_val;
-    }
-
-    /*
-     * And finally, append the HDLC flag, and send it away
-     */
-    *outmp->b_wptr++ = PPP_FLAG;
-
-    state->stats.ppp_obytes += msgdsize(outmp);
-    state->stats.ppp_opackets++;
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-
-    putnext(q, outmp);
-    return;
-}
-
-/*
- * Checks the 32-bit receive ACCM to see if the byte needs un-escaping
- */
-#define IN_RX_MAP(c, m)	((((unsigned int) (uchar_t) (c)) < 0x20) && \
-			(m) & (1 << (c)))
-
-
-/*
- * Process received characters.
- */
-static void
-ahdlc_decode(q, mp)
-    queue_t *q;
-    mblk_t  *mp;
-{
-    ahdlc_state_t   *state;
-    mblk_t	    *om;
-    uchar_t	    *dp;
-    ushort_t	    fcs;
-#if defined(SOL2)
-    mblk_t	    *zmp;
-#endif /* SOL2 */
-
-#if defined(SOL2)
-    /*
-     * In case the driver (or something below) doesn't send
-     * data upstream in one message block, concatenate everything
-     */
-    if (!((mp->b_wptr - mp->b_rptr == msgdsize(mp)) && 
-         ((intpointer_t)mp->b_rptr % sizeof(intpointer_t) == 0))) {
-
-	zmp = msgpullup(mp, -1);
-	freemsg(mp);
-	mp = zmp;
-	if (mp == 0)
-	    return; 
-    }
-#endif /* SOL2 */
-
-    state = (ahdlc_state_t *) q->q_ptr;
-
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    state->stats.ppp_ibytes += msgdsize(mp);
-
-    for (dp = mp->b_rptr; dp < mp->b_wptr; dp++) {
-
-	/*
-	 * This should detect the lack of 8-bit communication channel
-	 * which is necessary for PPP to work. In addition, it also
-	 * checks on the parity.
-	 */
-	if (*dp & 0x80)
-	    state->flags |= RCV_B7_1;
-	else
-	    state->flags |= RCV_B7_0;
-
-	if (paritytab[*dp >> 5] & (1 << (*dp & 0x1f)))
-	    state->flags |= RCV_ODDP;
-	else
-	    state->flags |= RCV_EVNP;
-
-	/*
-	 * So we have a HDLC flag ...
-	 */
-	if (*dp == PPP_FLAG) {
-
-	    /*
-	     * If we think that it marks the beginning of the frame,
-	     * then continue to process the next octects
-	     */
-	    if ((state->flags & IFLUSH) ||
-		(state->rx_buf == 0) ||
-		(msgdsize(state->rx_buf) == 0)) {
-
-		state->flags &= ~IFLUSH;
-		continue;
-	    }
-
-	    /*
-	     * We get here because the above condition isn't true,
-	     * in which case the HDLC flag was there to mark the end
-	     * of the frame (or so we think)
-	     */
-	    om = state->rx_buf;
-
-	    if (state->infcs == PPP_GOODFCS) {
-		state->stats.ppp_ipackets++;
-		adjmsg(om, -PPP_FCSLEN);
-		putnext(q, om);
-	    } else {
-		DPRINT2("ppp%d: bad fcs (len=%d)\n",
-                    state->unit, msgdsize(state->rx_buf));
-		freemsg(state->rx_buf);
-		state->flags &= ~(IFLUSH | ESCAPED);
-		state->stats.ppp_ierrors++;
-		putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-	    }
-
-	    state->rx_buf = 0;
-	    continue;
-	}
-
-	if (state->flags & IFLUSH) {
-	    continue;
-	}
-
-	/*
-	 * Allocate a receive buffer, large enough to store a frame (after
-	 * un-escaping) of at least 1500 octets. If MRU is negotiated to
-	 * be more than the default, then allocate that much. In addition,
-	 * we add an extra 32-bytes for a fudge factor
-	 */ 
-	if (state->rx_buf == 0) {
-	    state->rx_buf_size  = (state->mru < PPP_MRU ? PPP_MRU : state->mru);
-	    state->rx_buf_size += (sizeof(u_int32_t) << 3);
-	    state->rx_buf = allocb(state->rx_buf_size, BPRI_MED);
-
-	    /*
-	     * If allocation fails, try again on the next frame
-	     */
-	    if (state->rx_buf == 0) {
-		state->flags |= IFLUSH;
-		continue;
-	    }
-	    state->flags &= ~(IFLUSH | ESCAPED);
-	    state->infcs  = PPP_INITFCS;
-	}
-
-	if (*dp == PPP_ESCAPE) {
-	    state->flags |= ESCAPED;
-	    continue;
-	}
-
-	/*
-	 * Make sure we un-escape the necessary characters, as well as the
-	 * ones in our receive async control character map
-	 */
-	if (state->flags & ESCAPED) {
-	    *dp ^= PPP_TRANS;
-	    state->flags &= ~ESCAPED;
-	} else if (IN_RX_MAP(*dp, state->raccm)) 
-	    continue;
-
-	/*
-	 * Unless the peer lied to us about the negotiated MRU, we should
-	 * never get a frame which is too long. If it happens, toss it away
-	 * and grab the next incoming one
-	 */
-	if (msgdsize(state->rx_buf) < state->rx_buf_size) {
-	    state->infcs = PPP_FCS(state->infcs, *dp);
-	    *state->rx_buf->b_wptr++ = *dp;
-	} else {
-	    DPRINT2("ppp%d: frame too long (%d)\n",
-		state->unit, msgdsize(state->rx_buf));
-	    freemsg(state->rx_buf);
-	    state->rx_buf     = 0;
-	    state->flags     |= IFLUSH;
-	}
-    }
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-}
-
-static int
-msg_byte(mp, i)
-    mblk_t *mp;
-    unsigned int i;
-{
-    while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
-	mp = mp->b_cont;
-    if (mp == 0)
-	return -1;
-    return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/modules/ppp_comp.c b/mdk-stage1/ppp/modules/ppp_comp.c
deleted file mode 100644
index f6eef5ab1..000000000
--- a/mdk-stage1/ppp/modules/ppp_comp.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * ppp_comp.c - STREAMS module for kernel-level compression and CCP support.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SVR4, Solaris 2, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/stream.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-#ifdef __osf__
-#include <sys/mbuf.h>
-#include <sys/protosw.h>
-#endif
-
-#include <netinet/in.h>
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <net/vjcompress.h>
-
-#define PACKETPTR	mblk_t *
-#include <net/ppp-comp.h>
-
-MOD_OPEN_DECL(ppp_comp_open);
-MOD_CLOSE_DECL(ppp_comp_close);
-static int ppp_comp_rput __P((queue_t *, mblk_t *));
-static int ppp_comp_rsrv __P((queue_t *));
-static int ppp_comp_wput __P((queue_t *, mblk_t *));
-static int ppp_comp_wsrv __P((queue_t *));
-static void ppp_comp_ccp __P((queue_t *, mblk_t *, int));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-/* Extract byte i of message mp. */
-#define MSG_BYTE(mp, i)	((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
-			 msg_byte((mp), (i)))
-
-/* Is this LCP packet one we have to transmit using LCP defaults? */
-#define LCP_USE_DFLT(mp)	(1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-#define PPP_COMP_ID 0xbadf
-static struct module_info minfo = {
-#ifdef PRIOQ
-    PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16512, 16384,
-#else
-    PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16384, 4096,
-#endif
-};
-
-static struct qinit r_init = {
-    ppp_comp_rput, ppp_comp_rsrv, ppp_comp_open, ppp_comp_close,
-    NULL, &minfo, NULL
-};
-
-static struct qinit w_init = {
-    ppp_comp_wput, ppp_comp_wsrv, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int pcmpdevflag = 0;
-#define ppp_compinfo pcmpinfo
-#endif
-struct streamtab ppp_compinfo = {
-    &r_init, &w_init, NULL, NULL
-};
-
-int ppp_comp_count;		/* number of module instances in use */
-
-#ifdef __osf__
-
-static void ppp_comp_alloc __P((comp_state_t *));
-typedef struct memreq {
-    unsigned char comp_opts[20];
-    int cmd;
-    int thread_status;
-    char *returned_mem;
-} memreq_t;
-
-#endif
-
-typedef struct comp_state {
-    int		flags;
-    int		mru;
-    int		mtu;
-    int		unit;
-    struct compressor *xcomp;
-    void	*xstate;
-    struct compressor *rcomp;
-    void	*rstate;
-    struct vjcompress vj_comp;
-    int		vj_last_ierrors;
-    struct pppstat stats;
-#ifdef __osf__
-    memreq_t	memreq;
-    thread_t	thread;
-#endif
-} comp_state_t;
-
-
-#ifdef __osf__
-extern task_t first_task;
-#endif
-
-/* Bits in flags are as defined in pppio.h. */
-#define CCP_ERR		(CCP_ERROR | CCP_FATALERROR)
-#define LAST_MOD	0x1000000	/* no ppp modules below us */
-#define DBGLOG		0x2000000	/* log debugging stuff */
-
-#define MAX_IPHDR	128	/* max TCP/IP header size */
-#define MAX_VJHDR	20	/* max VJ compressed header size (?) */
-
-#undef MIN		/* just in case */
-#define MIN(a, b)	((a) < (b)? (a): (b))
-
-/*
- * List of compressors we know about.
- */
-
-#if DO_BSD_COMPRESS
-extern struct compressor ppp_bsd_compress;
-#endif
-#if DO_DEFLATE
-extern struct compressor ppp_deflate, ppp_deflate_draft;
-#endif
-
-struct compressor *ppp_compressors[] = {
-#if DO_BSD_COMPRESS
-    &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
-    &ppp_deflate,
-    &ppp_deflate_draft,
-#endif
-    NULL
-};
-
-/*
- * STREAMS module entry points.
- */
-MOD_OPEN(ppp_comp_open)
-{
-    comp_state_t *cp;
-#ifdef __osf__
-    thread_t thread;
-#endif
-
-    if (q->q_ptr == NULL) {
-	cp = (comp_state_t *) ALLOC_SLEEP(sizeof(comp_state_t));
-	if (cp == NULL)
-	    OPEN_ERROR(ENOSR);
-	bzero((caddr_t)cp, sizeof(comp_state_t));
-	WR(q)->q_ptr = q->q_ptr = (caddr_t) cp;
-	cp->mru = PPP_MRU;
-	cp->mtu = PPP_MTU;
-	cp->xstate = NULL;
-	cp->rstate = NULL;
-	vj_compress_init(&cp->vj_comp, -1);
-#ifdef __osf__
-	if (!(thread = kernel_thread_w_arg(first_task, ppp_comp_alloc, (void *)cp)))
-		OPEN_ERROR(ENOSR);
-	cp->thread = thread;
-#endif
-	++ppp_comp_count;
-	qprocson(q);
-    }
-    return 0;
-}
-
-MOD_CLOSE(ppp_comp_close)
-{
-    comp_state_t *cp;
-
-    qprocsoff(q);
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp != NULL) {
-	if (cp->xstate != NULL)
-	    (*cp->xcomp->comp_free)(cp->xstate);
-	if (cp->rstate != NULL)
-	    (*cp->rcomp->decomp_free)(cp->rstate);
-#ifdef __osf__
-	if (!cp->thread)
-	    printf("ppp_comp_close: NULL thread!\n");
-	else
-	    thread_terminate(cp->thread);
-#endif
-	FREE(cp, sizeof(comp_state_t));
-	q->q_ptr = NULL;
-	OTHERQ(q)->q_ptr = NULL;
-	--ppp_comp_count;
-    }
-    return 0;
-}
-
-#ifdef __osf__
-
-/* thread for calling back to a compressor's memory allocator
- * Needed for Digital UNIX since it's VM can't handle requests
- * for large amounts of memory without blocking.  The thread
- * provides a context in which we can call a memory allocator
- * that may block.
- */
-static void
-ppp_comp_alloc(comp_state_t *cp)
-{
-    int len, cmd;
-    unsigned char *compressor_options;
-    thread_t thread;
-    void *(*comp_allocator)();
-
-
-#if defined(MAJOR_VERSION) && (MAJOR_VERSION <= 2)
-
-    /* In 2.x and earlier the argument gets passed
-     * in the thread structure itself.  Yuck.
-     */
-    thread = current_thread();
-    cp = thread->reply_port;
-    thread->reply_port = PORT_NULL;
-
-#endif
-
-    for (;;) {
-	assert_wait((vm_offset_t)&cp->memreq.thread_status, TRUE);
-	thread_block();
-
-	if (thread_should_halt(current_thread()))
-	    thread_halt_self();
-	cmd = cp->memreq.cmd;
-	compressor_options = &cp->memreq.comp_opts[0];
-	len = compressor_options[1];
-	if (cmd == PPPIO_XCOMP) {
-	    cp->memreq.returned_mem = cp->xcomp->comp_alloc(compressor_options, len);
-	    if (!cp->memreq.returned_mem) {
-		cp->memreq.thread_status = ENOSR;
-	    } else {
-		cp->memreq.thread_status = 0;
-	    }
-	} else {
-	    cp->memreq.returned_mem = cp->rcomp->decomp_alloc(compressor_options, len);
-	    if (!cp->memreq.returned_mem) {
-	        cp->memreq.thread_status = ENOSR;
-	    } else {
-		cp->memreq.thread_status = 0;
-	    }
-	}
-    }
-}
-
-#endif /* __osf__ */
-
-/* here's the deal with memory allocation under Digital UNIX.
- * Some other may also benefit from this...
- * We can't ask for huge chunks of memory in a context where
- * the caller can't be put to sleep (like, here.)  The alloc
- * is likely to fail.  Instead we do this: the first time we
- * get called, kick off a thread to do the allocation.  Return
- * immediately to the caller with EAGAIN, as an indication that
- * they should send down the ioctl again.  By the time the
- * second call comes in it's likely that the memory allocation
- * thread will have returned with the requested memory.  We will
- * continue to return EAGAIN however until the thread has completed.
- * When it has, we return zero (and the memory) if the allocator
- * was successful and ENOSR otherwise.
- *
- * Callers of the RCOMP and XCOMP ioctls are encouraged (but not
- * required) to loop for some number of iterations with a small
- * delay in the loop body (for instance a 1/10-th second "sleep"
- * via select.)
- */
-static int
-ppp_comp_wput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    struct iocblk *iop;
-    comp_state_t *cp;
-    int error, len, n;
-    int flags, mask;
-    mblk_t *np;
-    struct compressor **comp;
-    struct ppp_stats *psp;
-    struct ppp_comp_stats *csp;
-    unsigned char *opt_data;
-    int nxslots, nrslots;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_wput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-
-    case M_DATA:
-	putq(q, mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	switch (iop->ioc_cmd) {
-
-	case PPPIO_CFLAGS:
-	    /* set/get CCP state */
-	    if (iop->ioc_count != 2 * sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_CFLAGS b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    flags = ((int *) mp->b_cont->b_rptr)[0];
-	    mask = ((int *) mp->b_cont->b_rptr)[1];
-	    cp->flags = (cp->flags & ~mask) | (flags & mask);
-	    if ((mask & CCP_ISOPEN) && (flags & CCP_ISOPEN) == 0) {
-		if (cp->xstate != NULL) {
-		    (*cp->xcomp->comp_free)(cp->xstate);
-		    cp->xstate = NULL;
-		}
-		if (cp->rstate != NULL) {
-		    (*cp->rcomp->decomp_free)(cp->rstate);
-		    cp->rstate = NULL;
-		}
-		cp->flags &= ~CCP_ISUP;
-	    }
-	    error = 0;
-	    iop->ioc_count = sizeof(int);
-	    ((int *) mp->b_cont->b_rptr)[0] = cp->flags;
-	    mp->b_cont->b_wptr = mp->b_cont->b_rptr + sizeof(int);
-	    break;
-
-	case PPPIO_VJINIT:
-	    /*
-	     * Initialize VJ compressor/decompressor
-	     */
-	    if (iop->ioc_count != 2)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_VJINIT b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    nxslots = mp->b_cont->b_rptr[0] + 1;
-	    nrslots = mp->b_cont->b_rptr[1] + 1;
-	    if (nxslots > MAX_STATES || nrslots > MAX_STATES)
-		break;
-	    vj_compress_init(&cp->vj_comp, nxslots);
-	    cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_XCOMP:
-	case PPPIO_RCOMP:
-	    if (iop->ioc_count <= 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_[XR]COMP b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    opt_data = mp->b_cont->b_rptr;
-	    len = mp->b_cont->b_wptr - opt_data;
-	    if (len > iop->ioc_count)
-		len = iop->ioc_count;
-	    if (opt_data[1] < 2 || opt_data[1] > len)
-		break;
-	    for (comp = ppp_compressors; *comp != NULL; ++comp)
-		if ((*comp)->compress_proto == opt_data[0]) {
-		    /* here's the handler! */
-		    error = 0;
-#ifndef __osf__
-		    if (iop->ioc_cmd == PPPIO_XCOMP) {
-			/* A previous call may have fetched memory for a compressor
-			 * that's now being retired or reset.  Free it using it's
-			 * mechanism for freeing stuff.
-			 */
-			if (cp->xstate != NULL) {
-			    (*cp->xcomp->comp_free)(cp->xstate);
-			    cp->xstate = NULL;
-			}
-			cp->xcomp = *comp;
-			cp->xstate = (*comp)->comp_alloc(opt_data, len);
-			if (cp->xstate == NULL)
-			    error = ENOSR;
-		    } else {
-			if (cp->rstate != NULL) {
-			    (*cp->rcomp->decomp_free)(cp->rstate);
-			    cp->rstate = NULL;
-			}
-			cp->rcomp = *comp;
-			cp->rstate = (*comp)->decomp_alloc(opt_data, len);
-			if (cp->rstate == NULL)
-			    error = ENOSR;
-		    }
-#else
-		    if ((error = cp->memreq.thread_status) != EAGAIN)
-		    if (iop->ioc_cmd == PPPIO_XCOMP) {
-			if (cp->xstate) {
-			    (*cp->xcomp->comp_free)(cp->xstate);
-			    cp->xstate = 0;
-			}
-			/* sanity check for compressor options
-			 */
-			if (sizeof (cp->memreq.comp_opts) < len) {
-			    printf("can't handle options for compressor %d (%d)\n", opt_data[0],
-				opt_data[1]);
-			    cp->memreq.thread_status = ENOSR;
-			    cp->memreq.returned_mem = 0;
-			}
-			/* fill in request for the thread and kick it off
-			 */
-			if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
-			    bcopy(opt_data, cp->memreq.comp_opts, len);
-			    cp->memreq.cmd = PPPIO_XCOMP;
-			    cp->xcomp = *comp;
-			    error = cp->memreq.thread_status = EAGAIN;
-			    thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
-			} else {
-			    cp->xstate = cp->memreq.returned_mem;
-			    cp->memreq.returned_mem = 0;
-			    cp->memreq.thread_status = 0;
-			}
-		    } else {
-			if (cp->rstate) {
-			    (*cp->rcomp->decomp_free)(cp->rstate);
-			    cp->rstate = NULL;
-			}
-			if (sizeof (cp->memreq.comp_opts) < len) {
-			    printf("can't handle options for compressor %d (%d)\n", opt_data[0],
-				opt_data[1]);
-			    cp->memreq.thread_status = ENOSR;
-			    cp->memreq.returned_mem = 0;
-			}
-			if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
-			    bcopy(opt_data, cp->memreq.comp_opts, len);
-			    cp->memreq.cmd = PPPIO_RCOMP;
-			    cp->rcomp = *comp;
-			    error = cp->memreq.thread_status = EAGAIN;
-			    thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
-			} else {
-			    cp->rstate = cp->memreq.returned_mem;
-			    cp->memreq.returned_mem = 0;
-			    cp->memreq.thread_status = 0;
-			}
-		    }
-#endif
-		    break;
-		}
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_GETSTAT:
-	    if ((cp->flags & LAST_MOD) == 0) {
-		error = -1;	/* let the ppp_ahdl module handle it */
-		break;
-	    }
-	    np = allocb(sizeof(struct ppp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    psp = (struct ppp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_stats);
-	    iop->ioc_count = sizeof(struct ppp_stats);
-	    psp->p = cp->stats;
-	    psp->vj = cp->vj_comp.stats;
-	    error = 0;
-	    break;
-
-	case PPPIO_GETCSTAT:
-	    np = allocb(sizeof(struct ppp_comp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    csp = (struct ppp_comp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_comp_stats);
-	    iop->ioc_count = sizeof(struct ppp_comp_stats);
-	    bzero((caddr_t)csp, sizeof(struct ppp_comp_stats));
-	    if (cp->xstate != 0)
-		(*cp->xcomp->comp_stat)(cp->xstate, &csp->c);
-	    if (cp->rstate != 0)
-		(*cp->rcomp->decomp_stat)(cp->rstate, &csp->d);
-	    error = 0;
-	    break;
-
-	case PPPIO_DEBUG:
-	    if (iop->ioc_count != sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_DEBUG b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n == PPPDBG_LOG + PPPDBG_COMP) {
-		DPRINT1("ppp_comp%d: debug log enabled\n", cp->unit);
-		cp->flags |= DBGLOG;
-		error = 0;
-		iop->ioc_count = 0;
-	    } else {
-		error = -1;
-	    }
-	    break;
-
-	case PPPIO_LASTMOD:
-	    cp->flags |= LAST_MOD;
-	    error = 0;
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_error = error;
-	    iop->ioc_count = 0;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_CTL:
-	switch (*mp->b_rptr) {
-	case PPPCTL_MTU:
-	    cp->mtu = ((unsigned short *)mp->b_rptr)[1];
-	    break;
-	case PPPCTL_MRU:
-	    cp->mru = ((unsigned short *)mp->b_rptr)[1];
-	    break;
-	case PPPCTL_UNIT:
-	    cp->unit = mp->b_rptr[1];
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_wsrv(q)
-    queue_t *q;
-{
-    mblk_t *mp, *cmp = NULL;
-    comp_state_t *cp;
-    int len, proto, type, hlen, code;
-    struct ip *ip;
-    unsigned char *vjhdr, *dp;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_wsrv\n");
-	return 0;
-    }
-
-    while ((mp = getq(q)) != 0) {
-	/* assert(mp->b_datap->db_type == M_DATA) */
-#ifdef PRIOQ
-        if (!bcanputnext(q,mp->b_band))
-#else
-        if (!canputnext(q))
-#endif PRIOQ
-	{
-	    putbq(q, mp);
-	    break;
-	}
-
-	/*
-	 * First check the packet length and work out what the protocol is.
-	 */
-	len = msgdsize(mp);
-	if (len < PPP_HDRLEN) {
-	    DPRINT1("ppp_comp_wsrv: bogus short packet (%d)\n", len);
-	    freemsg(mp);
-	    cp->stats.ppp_oerrors++;
-	    putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-	    continue;
-	}
-	proto = (MSG_BYTE(mp, 2) << 8) + MSG_BYTE(mp, 3);
-
-	/*
-	 * Make sure we've got enough data in the first mblk
-	 * and that we are its only user.
-	 */
-	if (proto == PPP_CCP)
-	    hlen = len;
-	else if (proto == PPP_IP)
-	    hlen = PPP_HDRLEN + MAX_IPHDR;
-	else
-	    hlen = PPP_HDRLEN;
-	if (hlen > len)
-	    hlen = len;
-	if (mp->b_wptr < mp->b_rptr + hlen || mp->b_datap->db_ref > 1) {
-	    PULLUP(mp, hlen);
-	    if (mp == 0) {
-		DPRINT1("ppp_comp_wsrv: pullup failed (%d)\n", hlen);
-		cp->stats.ppp_oerrors++;
-		putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-		continue;
-	    }
-	}
-
-	/*
-	 * Do VJ compression if requested.
-	 */
-	if (proto == PPP_IP && (cp->flags & COMP_VJC)) {
-	    ip = (struct ip *) (mp->b_rptr + PPP_HDRLEN);
-	    if (ip->ip_p == IPPROTO_TCP) {
-		type = vj_compress_tcp(ip, len - PPP_HDRLEN, &cp->vj_comp,
-				       (cp->flags & COMP_VJCCID), &vjhdr);
-		switch (type) {
-		case TYPE_UNCOMPRESSED_TCP:
-		    mp->b_rptr[3] = proto = PPP_VJC_UNCOMP;
-		    break;
-		case TYPE_COMPRESSED_TCP:
-		    dp = vjhdr - PPP_HDRLEN;
-		    dp[1] = mp->b_rptr[1]; /* copy control field */
-		    dp[0] = mp->b_rptr[0]; /* copy address field */
-		    dp[2] = 0;		   /* set protocol field */
-		    dp[3] = proto = PPP_VJC_COMP;
-		    mp->b_rptr = dp;
-		    break;
-		}
-	    }
-	}
-
-	/*
-	 * Do packet compression if enabled.
-	 */
-	if (proto == PPP_CCP)
-	    ppp_comp_ccp(q, mp, 0);
-	else if (proto != PPP_LCP && (cp->flags & CCP_COMP_RUN)
-		 && cp->xstate != NULL) {
-	    len = msgdsize(mp);
-	    (*cp->xcomp->compress)(cp->xstate, &cmp, mp, len,
-			(cp->flags & CCP_ISUP? cp->mtu + PPP_HDRLEN: 0));
-	    if (cmp != NULL) {
-#ifdef PRIOQ
-		cmp->b_band=mp->b_band;
-#endif PRIOQ
-		freemsg(mp);
-		mp = cmp;
-	    }
-	}
-
-	/*
-	 * Do address/control and protocol compression if enabled.
-	 */
-	if ((cp->flags & COMP_AC)
-	    && !(proto == PPP_LCP && LCP_USE_DFLT(mp))) {
-	    mp->b_rptr += 2;	/* drop the address & ctrl fields */
-	    if (proto < 0x100 && (cp->flags & COMP_PROT))
-		++mp->b_rptr;	/* drop the high protocol byte */
-	} else if (proto < 0x100 && (cp->flags & COMP_PROT)) {
-	    /* shuffle up the address & ctrl fields */
-	    mp->b_rptr[2] = mp->b_rptr[1];
-	    mp->b_rptr[1] = mp->b_rptr[0];
-	    ++mp->b_rptr;
-	}
-
-	cp->stats.ppp_opackets++;
-	cp->stats.ppp_obytes += msgdsize(mp);
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_rput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    comp_state_t *cp;
-    struct iocblk *iop;
-    struct ppp_stats *psp;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_rput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-
-    case M_DATA:
-	putq(q, mp);
-	break;
-
-    case M_IOCACK:
-	iop = (struct iocblk *) mp->b_rptr;
-	switch (iop->ioc_cmd) {
-	case PPPIO_GETSTAT:
-	    /*
-	     * Catch this on the way back from the ppp_ahdl module
-	     * so we can fill in the VJ stats.
-	     */
-	    if (mp->b_cont == 0 || iop->ioc_count != sizeof(struct ppp_stats))
-		break;
-	    psp = (struct ppp_stats *) mp->b_cont->b_rptr;
-	    psp->vj = cp->vj_comp.stats;
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    case M_CTL:
-	switch (mp->b_rptr[0]) {
-	case PPPCTL_IERROR:
-	    ++cp->stats.ppp_ierrors;
-	    break;
-	case PPPCTL_OERROR:
-	    ++cp->stats.ppp_oerrors;
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_rsrv(q)
-    queue_t *q;
-{
-    int proto, rv, i;
-    mblk_t *mp, *dmp = NULL, *np;
-    uchar_t *dp, *iphdr;
-    comp_state_t *cp;
-    int len, hlen, vjlen;
-    u_int iphlen;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_rsrv\n");
-	return 0;
-    }
-
-    while ((mp = getq(q)) != 0) {
-	/* assert(mp->b_datap->db_type == M_DATA) */
-	if (!canputnext(q)) {
-	    putbq(q, mp);
-	    break;
-	}
-
-	len = msgdsize(mp);
-	cp->stats.ppp_ibytes += len;
-	cp->stats.ppp_ipackets++;
-
-	/*
-	 * First work out the protocol and where the PPP header ends.
-	 */
-	i = 0;
-	proto = MSG_BYTE(mp, 0);
-	if (proto == PPP_ALLSTATIONS) {
-	    i = 2;
-	    proto = MSG_BYTE(mp, 2);
-	}
-	if ((proto & 1) == 0) {
-	    ++i;
-	    proto = (proto << 8) + MSG_BYTE(mp, i);
-	}
-	hlen = i + 1;
-
-	/*
-	 * Now reconstruct a complete, contiguous PPP header at the
-	 * start of the packet.
-	 */
-	if (hlen < ((cp->flags & DECOMP_AC)? 0: 2)
-	           + ((cp->flags & DECOMP_PROT)? 1: 2)) {
-	    /* count these? */
-	    goto bad;
-	}
-	if (mp->b_rptr + hlen > mp->b_wptr) {
-	    adjmsg(mp, hlen);	/* XXX check this call */
-	    hlen = 0;
-	}
-	if (hlen != PPP_HDRLEN) {
-	    /*
-	     * We need to put some bytes on the front of the packet
-	     * to make a full-length PPP header.
-	     * If we can put them in *mp, we do, otherwise we
-	     * tack another mblk on the front.
-	     * XXX we really shouldn't need to carry around
-	     * the address and control at this stage.
-	     */
-	    dp = mp->b_rptr + hlen - PPP_HDRLEN;
-	    if (dp < mp->b_datap->db_base || mp->b_datap->db_ref > 1) {
-		np = allocb(PPP_HDRLEN, BPRI_MED);
-		if (np == 0)
-		    goto bad;
-		np->b_cont = mp;
-		mp->b_rptr += hlen;
-		mp = np;
-		dp = mp->b_wptr;
-		mp->b_wptr += PPP_HDRLEN;
-	    } else
-		mp->b_rptr = dp;
-
-	    dp[0] = PPP_ALLSTATIONS;
-	    dp[1] = PPP_UI;
-	    dp[2] = proto >> 8;
-	    dp[3] = proto;
-	}
-
-	/*
-	 * Now see if we have a compressed packet to decompress,
-	 * or a CCP packet to take notice of.
-	 */
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	if (proto == PPP_CCP) {
-	    len = msgdsize(mp);
-	    if (mp->b_wptr < mp->b_rptr + len) {
-		PULLUP(mp, len);
-		if (mp == 0)
-		    goto bad;
-	    }
-	    ppp_comp_ccp(q, mp, 1);
-	} else if (proto == PPP_COMP) {
-	    if ((cp->flags & CCP_ISUP)
-		&& (cp->flags & CCP_DECOMP_RUN) && cp->rstate
-		&& (cp->flags & CCP_ERR) == 0) {
-		rv = (*cp->rcomp->decompress)(cp->rstate, mp, &dmp);
-		switch (rv) {
-		case DECOMP_OK:
-		    freemsg(mp);
-		    mp = dmp;
-		    if (mp == NULL) {
-			/* no error, but no packet returned either. */
-			continue;
-		    }
-		    break;
-		case DECOMP_ERROR:
-		    cp->flags |= CCP_ERROR;
-		    ++cp->stats.ppp_ierrors;
-		    putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-		    break;
-		case DECOMP_FATALERROR:
-		    cp->flags |= CCP_FATALERROR;
-		    ++cp->stats.ppp_ierrors;
-		    putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-		    break;
-		}
-	    }
-	} else if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
-	    (*cp->rcomp->incomp)(cp->rstate, mp);
-	}
-
-	/*
-	 * Now do VJ decompression.
-	 */
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	if (proto == PPP_VJC_COMP || proto == PPP_VJC_UNCOMP) {
-	    len = msgdsize(mp) - PPP_HDRLEN;
-	    if ((cp->flags & DECOMP_VJC) == 0 || len <= 0)
-		goto bad;
-
-	    /*
-	     * Advance past the ppp header.
-	     * Here we assume that the whole PPP header is in the first mblk.
-	     */
-	    np = mp;
-	    dp = np->b_rptr + PPP_HDRLEN;
-	    if (dp >= mp->b_wptr) {
-		np = np->b_cont;
-		dp = np->b_rptr;
-	    }
-
-	    /*
-	     * Make sure we have sufficient contiguous data at this point.
-	     */
-	    hlen = (proto == PPP_VJC_COMP)? MAX_VJHDR: MAX_IPHDR;
-	    if (hlen > len)
-		hlen = len;
-	    if (np->b_wptr < dp + hlen || np->b_datap->db_ref > 1) {
-		PULLUP(mp, hlen + PPP_HDRLEN);
-		if (mp == 0)
-		    goto bad;
-		np = mp;
-		dp = np->b_rptr + PPP_HDRLEN;
-	    }
-
-	    if (proto == PPP_VJC_COMP) {
-		/*
-		 * Decompress VJ-compressed packet.
-		 * First reset compressor if an input error has occurred.
-		 */
-		if (cp->stats.ppp_ierrors != cp->vj_last_ierrors) {
-		    if (cp->flags & DBGLOG)
-			DPRINT1("ppp%d: resetting VJ\n", cp->unit);
-		    vj_uncompress_err(&cp->vj_comp);
-		    cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-		}
-
-		vjlen = vj_uncompress_tcp(dp, np->b_wptr - dp, len,
-					  &cp->vj_comp, &iphdr, &iphlen);
-		if (vjlen < 0) {
-		    if (cp->flags & DBGLOG)
-			DPRINT2("ppp%d: vj_uncomp_tcp failed, pkt len %d\n",
-				cp->unit, len);
-		    ++cp->vj_last_ierrors;  /* so we don't reset next time */
-		    goto bad;
-		}
-
-		/* drop ppp and vj headers off */
-		if (mp != np) {
-		    freeb(mp);
-		    mp = np;
-		}
-		mp->b_rptr = dp + vjlen;
-
-		/* allocate a new mblk for the ppp and ip headers */
-		if ((np = allocb(iphlen + PPP_HDRLEN + 4, BPRI_MED)) == 0)
-		    goto bad;
-		dp = np->b_rptr;	/* prepend mblk with TCP/IP hdr */
-		dp[0] = PPP_ALLSTATIONS; /* reconstruct PPP header */
-		dp[1] = PPP_UI;
-		dp[2] = PPP_IP >> 8;
-		dp[3] = PPP_IP;
-		bcopy((caddr_t)iphdr, (caddr_t)dp + PPP_HDRLEN, iphlen);
-		np->b_wptr = dp + iphlen + PPP_HDRLEN;
-		np->b_cont = mp;
-
-		/* XXX there seems to be a bug which causes panics in strread
-		   if we make an mbuf with only the IP header in it :-( */
-		if (mp->b_wptr - mp->b_rptr > 4) {
-		    bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr, 4);
-		    mp->b_rptr += 4;
-		    np->b_wptr += 4;
-		} else {
-		    bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr,
-			  mp->b_wptr - mp->b_rptr);
-		    np->b_wptr += mp->b_wptr - mp->b_rptr;
-		    np->b_cont = mp->b_cont;
-		    freeb(mp);
-		}
-
-		mp = np;
-
-	    } else {
-		/*
-		 * "Decompress" a VJ-uncompressed packet.
-		 */
-		cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-		if (!vj_uncompress_uncomp(dp, hlen, &cp->vj_comp)) {
-		    if (cp->flags & DBGLOG)
-			DPRINT2("ppp%d: vj_uncomp_uncomp failed, pkt len %d\n",
-				cp->unit, len);
-		    ++cp->vj_last_ierrors;  /* don't need to reset next time */
-		    goto bad;
-		}
-		mp->b_rptr[3] = PPP_IP;	/* fix up the PPP protocol field */
-	    }
-	}
-
-	putnext(q, mp);
-	continue;
-
-    bad:
-	if (mp != 0)
-	    freemsg(mp);
-	cp->stats.ppp_ierrors++;
-	putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-    }
-
-    return 0;
-}
-
-/*
- * Handle a CCP packet being sent or received.
- * Here all the data in the packet is in a single mbuf.
- */
-static void
-ppp_comp_ccp(q, mp, rcvd)
-    queue_t *q;
-    mblk_t *mp;
-    int rcvd;
-{
-    int len, clen;
-    comp_state_t *cp;
-    unsigned char *dp;
-
-    len = msgdsize(mp);
-    if (len < PPP_HDRLEN + CCP_HDRLEN)
-	return;
-
-    cp = (comp_state_t *) q->q_ptr;
-    dp = mp->b_rptr + PPP_HDRLEN;
-    len -= PPP_HDRLEN;
-    clen = CCP_LENGTH(dp);
-    if (clen > len)
-	return;
-
-    switch (CCP_CODE(dp)) {
-    case CCP_CONFREQ:
-    case CCP_TERMREQ:
-    case CCP_TERMACK:
-	cp->flags &= ~CCP_ISUP;
-	break;
-
-    case CCP_CONFACK:
-	if ((cp->flags & (CCP_ISOPEN | CCP_ISUP)) == CCP_ISOPEN
-	    && clen >= CCP_HDRLEN + CCP_OPT_MINLEN
-	    && clen >= CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN)) {
-	    if (!rcvd) {
-		if (cp->xstate != NULL
-		    && (*cp->xcomp->comp_init)
-		        (cp->xstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
-			 cp->unit, 0, ((cp->flags & DBGLOG) != 0)))
-		    cp->flags |= CCP_COMP_RUN;
-	    } else {
-		if (cp->rstate != NULL
-		    && (*cp->rcomp->decomp_init)
-		        (cp->rstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
-			 cp->unit, 0, cp->mru, ((cp->flags & DBGLOG) != 0)))
-		    cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
-	    }
-	}
-	break;
-
-    case CCP_RESETACK:
-	if (cp->flags & CCP_ISUP) {
-	    if (!rcvd) {
-		if (cp->xstate && (cp->flags & CCP_COMP_RUN))
-		    (*cp->xcomp->comp_reset)(cp->xstate);
-	    } else {
-		if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
-		    (*cp->rcomp->decomp_reset)(cp->rstate);
-		    cp->flags &= ~CCP_ERROR;
-		}
-	    }
-	}
-	break;
-    }
-}
-
-#if 0
-dump_msg(mp)
-    mblk_t *mp;
-{
-    dblk_t *db;
-
-    while (mp != 0) {
-	db = mp->b_datap;
-	DPRINT2("mp=%x cont=%x ", mp, mp->b_cont);
-	DPRINT3("rptr=%x wptr=%x datap=%x\n", mp->b_rptr, mp->b_wptr, db);
-	DPRINT2("  base=%x lim=%x", db->db_base, db->db_lim);
-	DPRINT2(" ref=%d type=%d\n", db->db_ref, db->db_type);
-	mp = mp->b_cont;
-    }
-}
-#endif
-
-static int
-msg_byte(mp, i)
-    mblk_t *mp;
-    unsigned int i;
-{
-    while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
-	mp = mp->b_cont;
-    if (mp == 0)
-	return -1;
-    return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/modules/ppp_mod.h b/mdk-stage1/ppp/modules/ppp_mod.h
deleted file mode 100644
index f0af00886..000000000
--- a/mdk-stage1/ppp/modules/ppp_mod.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Miscellaneous definitions for PPP STREAMS modules.
- */
-
-/*
- * Macros for allocating and freeing kernel memory.
- */
-#ifdef SVR4			/* SVR4, including Solaris 2 */
-#include <sys/kmem.h>
-#define ALLOC_SLEEP(n)		kmem_alloc((n), KM_SLEEP)
-#define ALLOC_NOSLEEP(n)	kmem_alloc((n), KM_NOSLEEP)
-#define FREE(p, n)		kmem_free((p), (n))
-#endif
-
-#ifdef SUNOS4
-#include <sys/kmem_alloc.h>	/* SunOS 4.x */
-#define ALLOC_SLEEP(n)		kmem_alloc((n), KMEM_SLEEP)
-#define ALLOC_NOSLEEP(n)	kmem_alloc((n), KMEM_NOSLEEP)
-#define FREE(p, n)		kmem_free((p), (n))
-#define NOTSUSER()		(suser()? 0: EPERM)
-#define bcanputnext(q, band)	canputnext((q))
-#endif /* SunOS 4 */
-
-#ifdef __osf__
-#include <sys/malloc.h>
-
-/* caution: this mirrors macros in sys/malloc.h, and uses interfaces
- * which are subject to change.
- * The problems are that:
- *     - the official MALLOC macro wants the lhs of the assignment as an argument,
- *	 and it takes care of the assignment itself (yuck.)
- *     - PPP insists on using "FREE" which conflicts with a macro of the same name.
- *
- */
-#ifdef BUCKETINDX /* V2.0 */
-#define ALLOC_SLEEP(n)		(void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n)	(void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_NOWAIT)
-#else
-#define ALLOC_SLEEP(n)		(void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n)	(void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_NOWAIT)
-#endif
-
-#define bcanputnext(q, band)	canputnext((q))
-
-#ifdef FREE
-#undef FREE
-#endif
-#define FREE(p, n)		free((void *)(p), M_DEVBUF)
-
-#define NO_DLPI 1
-
-#ifndef IFT_PPP
-#define IFT_PPP 0x17
-#endif
-
-#include <sys/proc.h>
-#define NOTSUSER()		(suser(u.u_procp->p_rcred, &u.u_acflag) ? EPERM : 0)
-
-/* #include "ppp_osf.h" */
-
-#endif /* __osf__ */
-
-#ifdef AIX4
-#define ALLOC_SLEEP(n)		xmalloc((n), 0, pinned_heap)	/* AIX V4.x */
-#define ALLOC_NOSLEEP(n)	xmalloc((n), 0, pinned_heap)	/* AIX V4.x */
-#define FREE(p, n)		xmfree((p), pinned_heap)
-#define NOTSUSER()		(suser()? 0: EPERM)
-#endif /* AIX */
-
-/*
- * Macros for printing debugging stuff.
- */
-#ifdef DEBUG
-#if defined(SVR4) || defined(__osf__)
-#if defined(SNI)
-#include <sys/strlog.h>
-#define STRLOG_ID		4712
-#define DPRINT(f)		strlog(STRLOG_ID, 0, 0, SL_TRACE, f)
-#define DPRINT1(f, a1)		strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1)
-#define DPRINT2(f, a1, a2)	strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2, a3)
-#else
-#define DPRINT(f)		cmn_err(CE_CONT, f)
-#define DPRINT1(f, a1)		cmn_err(CE_CONT, f, a1)
-#define DPRINT2(f, a1, a2)	cmn_err(CE_CONT, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	cmn_err(CE_CONT, f, a1, a2, a3)
-#endif /* SNI */
-#else
-#define DPRINT(f)		printf(f)
-#define DPRINT1(f, a1)		printf(f, a1)
-#define DPRINT2(f, a1, a2)	printf(f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	printf(f, a1, a2, a3)
-#endif /* SVR4 or OSF */
-
-#else
-#define DPRINT(f)		0
-#define DPRINT1(f, a1)		0
-#define DPRINT2(f, a1, a2)	0
-#define DPRINT3(f, a1, a2, a3)	0
-#endif /* DEBUG */
-
-#ifndef SVR4
-typedef unsigned char uchar_t;
-typedef unsigned short ushort_t;
-#ifndef __osf__
-typedef int minor_t;
-#endif
-#endif
-
-/*
- * If we don't have multithreading support, define substitutes.
- */
-#ifndef D_MP
-# define qprocson(q)
-# define qprocsoff(q)
-# define put(q, mp)	((*(q)->q_qinfo->qi_putp)((q), (mp)))
-# define canputnext(q)	canput((q)->q_next)
-# define qwriter(q, mp, func, scope)	(func)((q), (mp))
-#endif
-
-#ifdef D_MP
-/* Use msgpullup if we have other multithreading support. */
-#define PULLUP(mp, len)				\
-    do {					\
-	mblk_t *np = msgpullup((mp), (len));	\
-	freemsg((mp));				\
-	mp = np;				\
-    } while (0)
-
-#else
-/* Use pullupmsg if we don't have any multithreading support. */
-#define PULLUP(mp, len)			\
-    do {				\
-	if (!pullupmsg((mp), (len))) {	\
-	    freemsg((mp));		\
-	    mp = 0;			\
-	}				\
-    } while (0)
-#endif
-
-/*
- * How to declare the open and close procedures for a module.
- */
-#ifdef SVR4
-#define MOD_OPEN_DECL(name)	\
-static int name __P((queue_t *, dev_t *, int, int, cred_t *))
-
-#define MOD_CLOSE_DECL(name)	\
-static int name __P((queue_t *, int, cred_t *))
-
-#define MOD_OPEN(name)				\
-static int name(q, devp, flag, sflag, credp)	\
-    queue_t *q;					\
-    dev_t *devp;				\
-    int flag, sflag;				\
-    cred_t *credp;
-
-#define MOD_CLOSE(name)		\
-static int name(q, flag, credp)	\
-    queue_t *q;			\
-    int flag;			\
-    cred_t *credp;
-
-#define OPEN_ERROR(x)		return (x)
-#define DRV_OPEN_OK(dev)	return 0
-
-#define NOTSUSER()		(drv_priv(credp))
-
-#else	/* not SVR4 */
-#define MOD_OPEN_DECL(name)	\
-static int name __P((queue_t *, int, int, int))
-
-#define MOD_CLOSE_DECL(name)	\
-static int name __P((queue_t *, int))
-
-#define MOD_OPEN(name)		\
-static int name(q, dev, flag, sflag)	\
-    queue_t *q;				\
-    int dev;				\
-    int flag, sflag;
-
-#define MOD_CLOSE(name)		\
-static int name(q, flag)	\
-    queue_t *q;			\
-    int flag;
-
-#define OPEN_ERROR(x)		{ u.u_error = (x); return OPENFAIL; }
-#define DRV_OPEN_OK(dev)	return (dev)
-
-#endif	/* SVR4 */
diff --git a/mdk-stage1/ppp/modules/vjcompress.c b/mdk-stage1/ppp/modules/vjcompress.c
deleted file mode 100644
index 809b87231..000000000
--- a/mdk-stage1/ppp/modules/vjcompress.c
+++ /dev/null
@@ -1,587 +0,0 @@
-/*
- * Routines to compress and uncompess tcp packets (for transmission
- * over low speed serial lines.
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- *	Van Jacobson (van@helios.ee.lbl.gov), Dec 31, 1989:
- *	- Initial distribution.
- *
- * Modified June 1993 by Paul Mackerras, paulus@cs.anu.edu.au,
- * so that the entire packet being decompressed doesn't have
- * to be in contiguous memory (just the compressed header).
- */
-
-/*
- * This version is used under SunOS 4.x, Digital UNIX, AIX 4.x,
- * and SVR4 systems including Solaris 2.
- *
- * $Id$
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-
-#ifdef SVR4
-#ifndef __GNUC__
-#include <sys/byteorder.h>	/* for ntohl, etc. */
-#else
-/* make sure we don't get the gnu "fixed" one! */
-#include "/usr/include/sys/byteorder.h"
-#endif
-#endif
-
-#ifdef __osf__
-#include <net/net_globals.h>
-#endif
-#include <netinet/in.h>
-
-#ifdef AIX4
-#define _NETINET_IN_SYSTM_H_
-typedef u_long  n_long;
-#else
-#include <netinet/in_systm.h>
-#endif
-
-#include <netinet/ip.h>
-#include <netinet/tcp.h>
-
-#include <net/ppp_defs.h>
-#include <net/vjcompress.h>
-
-#ifndef VJ_NO_STATS
-#define INCR(counter) ++comp->stats.counter
-#else
-#define INCR(counter)
-#endif
-
-#define BCMP(p1, p2, n) bcmp((char *)(p1), (char *)(p2), (int)(n))
-#undef  BCOPY
-#define BCOPY(p1, p2, n) bcopy((char *)(p1), (char *)(p2), (int)(n))
-#ifndef KERNEL
-#define ovbcopy bcopy
-#endif
-
-#ifdef __osf__
-#define getip_hl(base)	(((base).ip_vhl)&0xf)
-#define getth_off(base)	((((base).th_xoff)&0xf0)>>4)
-
-#else
-#define getip_hl(base)	((base).ip_hl)
-#define getth_off(base)	((base).th_off)
-#endif
-
-void
-vj_compress_init(comp, max_state)
-    struct vjcompress *comp;
-    int max_state;
-{
-    register u_int i;
-    register struct cstate *tstate = comp->tstate;
-
-    if (max_state == -1)
-	max_state = MAX_STATES - 1;
-    bzero((char *)comp, sizeof(*comp));
-    for (i = max_state; i > 0; --i) {
-	tstate[i].cs_id = i;
-	tstate[i].cs_next = &tstate[i - 1];
-    }
-    tstate[0].cs_next = &tstate[max_state];
-    tstate[0].cs_id = 0;
-    comp->last_cs = &tstate[0];
-    comp->last_recv = 255;
-    comp->last_xmit = 255;
-    comp->flags = VJF_TOSS;
-}
-
-
-/* ENCODE encodes a number that is known to be non-zero.  ENCODEZ
- * checks for zero (since zero has to be encoded in the long, 3 byte
- * form).
- */
-#define ENCODE(n) { \
-	if ((u_short)(n) >= 256) { \
-		*cp++ = 0; \
-		cp[1] = (n); \
-		cp[0] = (n) >> 8; \
-		cp += 2; \
-	} else { \
-		*cp++ = (n); \
-	} \
-}
-#define ENCODEZ(n) { \
-	if ((u_short)(n) >= 256 || (u_short)(n) == 0) { \
-		*cp++ = 0; \
-		cp[1] = (n); \
-		cp[0] = (n) >> 8; \
-		cp += 2; \
-	} else { \
-		*cp++ = (n); \
-	} \
-}
-
-#define DECODEL(f) { \
-	if (*cp == 0) {\
-		u_int32_t tmp = ntohl(f) + ((cp[1] << 8) | cp[2]); \
-		(f) = htonl(tmp); \
-		cp += 3; \
-	} else { \
-		u_int32_t tmp = ntohl(f) + (u_int32_t)*cp++; \
-		(f) = htonl(tmp); \
-	} \
-}
-
-#define DECODES(f) { \
-	if (*cp == 0) {\
-		u_short tmp = ntohs(f) + ((cp[1] << 8) | cp[2]); \
-		(f) = htons(tmp); \
-		cp += 3; \
-	} else { \
-		u_short tmp = ntohs(f) + (u_int32_t)*cp++; \
-		(f) = htons(tmp); \
-	} \
-}
-
-#define DECODEU(f) { \
-	if (*cp == 0) {\
-		(f) = htons((cp[1] << 8) | cp[2]); \
-		cp += 3; \
-	} else { \
-		(f) = htons((u_int32_t)*cp++); \
-	} \
-}
-
-u_int
-vj_compress_tcp(ip, mlen, comp, compress_cid, vjhdrp)
-    register struct ip *ip;
-    u_int mlen;
-    struct vjcompress *comp;
-    int compress_cid;
-    u_char **vjhdrp;
-{
-    register struct cstate *cs = comp->last_cs->cs_next;
-    register u_int hlen = getip_hl(*ip);
-    register struct tcphdr *oth;
-    register struct tcphdr *th;
-    register u_int deltaS, deltaA;
-    register u_int changes = 0;
-    u_char new_seq[16];
-    register u_char *cp = new_seq;
-
-    /*
-     * Bail if this is an IP fragment or if the TCP packet isn't
-     * `compressible' (i.e., ACK isn't set or some other control bit is
-     * set).  (We assume that the caller has already made sure the
-     * packet is IP proto TCP).
-     */
-    if ((ip->ip_off & htons(0x3fff)) || mlen < 40)
-	return (TYPE_IP);
-
-    th = (struct tcphdr *)&((int *)ip)[hlen];
-    if ((th->th_flags & (TH_SYN|TH_FIN|TH_RST|TH_ACK)) != TH_ACK)
-	return (TYPE_IP);
-    /*
-     * Packet is compressible -- we're going to send either a
-     * COMPRESSED_TCP or UNCOMPRESSED_TCP packet.  Either way we need
-     * to locate (or create) the connection state.  Special case the
-     * most recently used connection since it's most likely to be used
-     * again & we don't have to do any reordering if it's used.
-     */
-    INCR(vjs_packets);
-    if (ip->ip_src.s_addr != cs->cs_ip.ip_src.s_addr ||
-	ip->ip_dst.s_addr != cs->cs_ip.ip_dst.s_addr ||
-	*(int *)th != ((int *)&cs->cs_ip)[getip_hl(cs->cs_ip)]) {
-	/*
-	 * Wasn't the first -- search for it.
-	 *
-	 * States are kept in a circularly linked list with
-	 * last_cs pointing to the end of the list.  The
-	 * list is kept in lru order by moving a state to the
-	 * head of the list whenever it is referenced.  Since
-	 * the list is short and, empirically, the connection
-	 * we want is almost always near the front, we locate
-	 * states via linear search.  If we don't find a state
-	 * for the datagram, the oldest state is (re-)used.
-	 */
-	register struct cstate *lcs;
-	register struct cstate *lastcs = comp->last_cs;
-
-	do {
-	    lcs = cs; cs = cs->cs_next;
-	    INCR(vjs_searches);
-	    if (ip->ip_src.s_addr == cs->cs_ip.ip_src.s_addr
-		&& ip->ip_dst.s_addr == cs->cs_ip.ip_dst.s_addr
-		&& *(int *)th == ((int *)&cs->cs_ip)[getip_hl(cs->cs_ip)])
-		goto found;
-	} while (cs != lastcs);
-
-	/*
-	 * Didn't find it -- re-use oldest cstate.  Send an
-	 * uncompressed packet that tells the other side what
-	 * connection number we're using for this conversation.
-	 * Note that since the state list is circular, the oldest
-	 * state points to the newest and we only need to set
-	 * last_cs to update the lru linkage.
-	 */
-	INCR(vjs_misses);
-	comp->last_cs = lcs;
-	hlen += getth_off(*th);
-	hlen <<= 2;
-	if (hlen > mlen)
-	    return (TYPE_IP);
-	goto uncompressed;
-
-    found:
-	/*
-	 * Found it -- move to the front on the connection list.
-	 */
-	if (cs == lastcs)
-	    comp->last_cs = lcs;
-	else {
-	    lcs->cs_next = cs->cs_next;
-	    cs->cs_next = lastcs->cs_next;
-	    lastcs->cs_next = cs;
-	}
-    }
-
-    /*
-     * Make sure that only what we expect to change changed. The first
-     * line of the `if' checks the IP protocol version, header length &
-     * type of service.  The 2nd line checks the "Don't fragment" bit.
-     * The 3rd line checks the time-to-live and protocol (the protocol
-     * check is unnecessary but costless).  The 4th line checks the TCP
-     * header length.  The 5th line checks IP options, if any.  The 6th
-     * line checks TCP options, if any.  If any of these things are
-     * different between the previous & current datagram, we send the
-     * current datagram `uncompressed'.
-     */
-    oth = (struct tcphdr *)&((int *)&cs->cs_ip)[hlen];
-    deltaS = hlen;
-    hlen += getth_off(*th);
-    hlen <<= 2;
-    if (hlen > mlen)
-	return (TYPE_IP);
-
-    if (((u_short *)ip)[0] != ((u_short *)&cs->cs_ip)[0] ||
-	((u_short *)ip)[3] != ((u_short *)&cs->cs_ip)[3] ||
-	((u_short *)ip)[4] != ((u_short *)&cs->cs_ip)[4] ||
-	getth_off(*th) != getth_off(*oth) ||
-	(deltaS > 5 && BCMP(ip + 1, &cs->cs_ip + 1, (deltaS - 5) << 2)) ||
-	(getth_off(*th) > 5 && BCMP(th + 1, oth + 1, (getth_off(*th) - 5) << 2)))
-	goto uncompressed;
-
-    /*
-     * Figure out which of the changing fields changed.  The
-     * receiver expects changes in the order: urgent, window,
-     * ack, seq (the order minimizes the number of temporaries
-     * needed in this section of code).
-     */
-    if (th->th_flags & TH_URG) {
-	deltaS = ntohs(th->th_urp);
-	ENCODEZ(deltaS);
-	changes |= NEW_U;
-    } else if (th->th_urp != oth->th_urp)
-	/* argh! URG not set but urp changed -- a sensible
-	 * implementation should never do this but RFC793
-	 * doesn't prohibit the change so we have to deal
-	 * with it. */
-	goto uncompressed;
-
-    if ((deltaS = (u_short)(ntohs(th->th_win) - ntohs(oth->th_win))) > 0) {
-	ENCODE(deltaS);
-	changes |= NEW_W;
-    }
-
-    if ((deltaA = ntohl(th->th_ack) - ntohl(oth->th_ack)) > 0) {
-	if (deltaA > 0xffff)
-	    goto uncompressed;
-	ENCODE(deltaA);
-	changes |= NEW_A;
-    }
-
-    if ((deltaS = ntohl(th->th_seq) - ntohl(oth->th_seq)) > 0) {
-	if (deltaS > 0xffff)
-	    goto uncompressed;
-	ENCODE(deltaS);
-	changes |= NEW_S;
-    }
-
-    switch(changes) {
-
-    case 0:
-	/*
-	 * Nothing changed. If this packet contains data and the
-	 * last one didn't, this is probably a data packet following
-	 * an ack (normal on an interactive connection) and we send
-	 * it compressed.  Otherwise it's probably a retransmit,
-	 * retransmitted ack or window probe.  Send it uncompressed
-	 * in case the other side missed the compressed version.
-	 */
-	if (ip->ip_len != cs->cs_ip.ip_len &&
-	    ntohs(cs->cs_ip.ip_len) == hlen)
-	    break;
-
-	/* (fall through) */
-
-    case SPECIAL_I:
-    case SPECIAL_D:
-	/*
-	 * actual changes match one of our special case encodings --
-	 * send packet uncompressed.
-	 */
-	goto uncompressed;
-
-    case NEW_S|NEW_A:
-	if (deltaS == deltaA && deltaS == ntohs(cs->cs_ip.ip_len) - hlen) {
-	    /* special case for echoed terminal traffic */
-	    changes = SPECIAL_I;
-	    cp = new_seq;
-	}
-	break;
-
-    case NEW_S:
-	if (deltaS == ntohs(cs->cs_ip.ip_len) - hlen) {
-	    /* special case for data xfer */
-	    changes = SPECIAL_D;
-	    cp = new_seq;
-	}
-	break;
-    }
-
-    deltaS = ntohs(ip->ip_id) - ntohs(cs->cs_ip.ip_id);
-    if (deltaS != 1) {
-	ENCODEZ(deltaS);
-	changes |= NEW_I;
-    }
-    if (th->th_flags & TH_PUSH)
-	changes |= TCP_PUSH_BIT;
-    /*
-     * Grab the cksum before we overwrite it below.  Then update our
-     * state with this packet's header.
-     */
-    deltaA = ntohs(th->th_sum);
-    BCOPY(ip, &cs->cs_ip, hlen);
-
-    /*
-     * We want to use the original packet as our compressed packet.
-     * (cp - new_seq) is the number of bytes we need for compressed
-     * sequence numbers.  In addition we need one byte for the change
-     * mask, one for the connection id and two for the tcp checksum.
-     * So, (cp - new_seq) + 4 bytes of header are needed.  hlen is how
-     * many bytes of the original packet to toss so subtract the two to
-     * get the new packet size.
-     */
-    deltaS = cp - new_seq;
-    cp = (u_char *)ip;
-    if (compress_cid == 0 || comp->last_xmit != cs->cs_id) {
-	comp->last_xmit = cs->cs_id;
-	hlen -= deltaS + 4;
-	*vjhdrp = (cp += hlen);
-	*cp++ = changes | NEW_C;
-	*cp++ = cs->cs_id;
-    } else {
-	hlen -= deltaS + 3;
-	*vjhdrp = (cp += hlen);
-	*cp++ = changes;
-    }
-    *cp++ = deltaA >> 8;
-    *cp++ = deltaA;
-    BCOPY(new_seq, cp, deltaS);
-    INCR(vjs_compressed);
-    return (TYPE_COMPRESSED_TCP);
-
-    /*
-     * Update connection state cs & send uncompressed packet (that is,
-     * a regular ip/tcp packet but with the 'conversation id' we hope
-     * to use on future compressed packets in the protocol field).
-     */
- uncompressed:
-    BCOPY(ip, &cs->cs_ip, hlen);
-    ip->ip_p = cs->cs_id;
-    comp->last_xmit = cs->cs_id;
-    return (TYPE_UNCOMPRESSED_TCP);
-}
-
-/*
- * Called when we may have missed a packet.
- */
-void
-vj_uncompress_err(comp)
-    struct vjcompress *comp;
-{
-    comp->flags |= VJF_TOSS;
-    INCR(vjs_errorin);
-}
-
-/*
- * "Uncompress" a packet of type TYPE_UNCOMPRESSED_TCP.
- */
-int
-vj_uncompress_uncomp(buf, buflen, comp)
-    u_char *buf;
-    int buflen;
-    struct vjcompress *comp;
-{
-    register u_int hlen;
-    register struct cstate *cs;
-    register struct ip *ip;
-
-    ip = (struct ip *) buf;
-    hlen = getip_hl(*ip) << 2;
-    if (ip->ip_p >= MAX_STATES
-	|| hlen + sizeof(struct tcphdr) > buflen
-	|| (hlen += getth_off(*((struct tcphdr *)&((char *)ip)[hlen])) << 2)
-	    > buflen
-	|| hlen > MAX_HDR) {
-	comp->flags |= VJF_TOSS;
-	INCR(vjs_errorin);
-	return (0);
-    }
-    cs = &comp->rstate[comp->last_recv = ip->ip_p];
-    comp->flags &=~ VJF_TOSS;
-    ip->ip_p = IPPROTO_TCP;
-    BCOPY(ip, &cs->cs_ip, hlen);
-    cs->cs_hlen = hlen;
-    INCR(vjs_uncompressedin);
-    return (1);
-}
-
-/*
- * Uncompress a packet of type TYPE_COMPRESSED_TCP.
- * The packet starts at buf and is of total length total_len.
- * The first buflen bytes are at buf; this must include the entire
- * compressed TCP/IP header.  This procedure returns the length
- * of the VJ header, with a pointer to the uncompressed IP header
- * in *hdrp and its length in *hlenp.
- */
-int
-vj_uncompress_tcp(buf, buflen, total_len, comp, hdrp, hlenp)
-    u_char *buf;
-    int buflen, total_len;
-    struct vjcompress *comp;
-    u_char **hdrp;
-    u_int *hlenp;
-{
-    register u_char *cp;
-    register u_int hlen, changes;
-    register struct tcphdr *th;
-    register struct cstate *cs;
-    register u_short *bp;
-    register u_int vjlen;
-    register u_int32_t tmp;
-
-    INCR(vjs_compressedin);
-    cp = buf;
-    changes = *cp++;
-    if (changes & NEW_C) {
-	/* Make sure the state index is in range, then grab the state.
-	 * If we have a good state index, clear the 'discard' flag. */
-	if (*cp >= MAX_STATES)
-	    goto bad;
-
-	comp->flags &=~ VJF_TOSS;
-	comp->last_recv = *cp++;
-    } else {
-	/* this packet has an implicit state index.  If we've
-	 * had a line error since the last time we got an
-	 * explicit state index, we have to toss the packet. */
-	if (comp->flags & VJF_TOSS) {
-	    INCR(vjs_tossed);
-	    return (-1);
-	}
-    }
-    cs = &comp->rstate[comp->last_recv];
-    hlen = getip_hl(cs->cs_ip) << 2;
-    th = (struct tcphdr *)&((u_char *)&cs->cs_ip)[hlen];
-    th->th_sum = htons((*cp << 8) | cp[1]);
-    cp += 2;
-    if (changes & TCP_PUSH_BIT)
-	th->th_flags |= TH_PUSH;
-    else
-	th->th_flags &=~ TH_PUSH;
-
-    switch (changes & SPECIALS_MASK) {
-    case SPECIAL_I:
-	{
-	    register u_int32_t i = ntohs(cs->cs_ip.ip_len) - cs->cs_hlen;
-	    /* some compilers can't nest inline assembler.. */
-	    tmp = ntohl(th->th_ack) + i;
-	    th->th_ack = htonl(tmp);
-	    tmp = ntohl(th->th_seq) + i;
-	    th->th_seq = htonl(tmp);
-	}
-	break;
-
-    case SPECIAL_D:
-	/* some compilers can't nest inline assembler.. */
-	tmp = ntohl(th->th_seq) + ntohs(cs->cs_ip.ip_len) - cs->cs_hlen;
-	th->th_seq = htonl(tmp);
-	break;
-
-    default:
-	if (changes & NEW_U) {
-	    th->th_flags |= TH_URG;
-	    DECODEU(th->th_urp);
-	} else
-	    th->th_flags &=~ TH_URG;
-	if (changes & NEW_W)
-	    DECODES(th->th_win);
-	if (changes & NEW_A)
-	    DECODEL(th->th_ack);
-	if (changes & NEW_S)
-	    DECODEL(th->th_seq);
-	break;
-    }
-    if (changes & NEW_I) {
-	DECODES(cs->cs_ip.ip_id);
-    } else {
-	cs->cs_ip.ip_id = ntohs(cs->cs_ip.ip_id) + 1;
-	cs->cs_ip.ip_id = htons(cs->cs_ip.ip_id);
-    }
-
-    /*
-     * At this point, cp points to the first byte of data in the
-     * packet.  Fill in the IP total length and update the IP
-     * header checksum.
-     */
-    vjlen = cp - buf;
-    buflen -= vjlen;
-    if (buflen < 0)
-	/* we must have dropped some characters (crc should detect
-	 * this but the old slip framing won't) */
-	goto bad;
-
-    total_len += cs->cs_hlen - vjlen;
-    cs->cs_ip.ip_len = htons(total_len);
-
-    /* recompute the ip header checksum */
-    bp = (u_short *) &cs->cs_ip;
-    cs->cs_ip.ip_sum = 0;
-    for (changes = 0; hlen > 0; hlen -= 2)
-	changes += *bp++;
-    changes = (changes & 0xffff) + (changes >> 16);
-    changes = (changes & 0xffff) + (changes >> 16);
-    cs->cs_ip.ip_sum = ~ changes;
-
-    *hdrp = (u_char *) &cs->cs_ip;
-    *hlenp = cs->cs_hlen;
-    return vjlen;
-
- bad:
-    comp->flags |= VJF_TOSS;
-    INCR(vjs_errorin);
-    return (-1);
-}
diff --git a/mdk-stage1/ppp/pppd/.cvsignore b/mdk-stage1/ppp/pppd/.cvsignore
deleted file mode 100644
index 476ef2253..000000000
--- a/mdk-stage1/ppp/pppd/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-pppd
-pppd-DIET
diff --git a/mdk-stage1/ppp/pppd/Makefile b/mdk-stage1/ppp/pppd/Makefile
deleted file mode 100644
index 3544dd19d..000000000
--- a/mdk-stage1/ppp/pppd/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = pppd
-
-BINTARGET = ../pppd-bin
-
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a $(BINTARGET) pppd
-
-FLAGS = -Wall -Wno-deprecated-declarations -Werror -Os -fomit-frame-pointer -DDO_BSD_COMPRESS=0 -D_linux_=1 -DHAVE_MMAP -DNO_DRAND48 -D_BSD_SOURCE -D_GNU_SOURCE
-
-INCS = -I../include -I.
-
-ifeq (GLIBC, $(L))
-LIBS = -static -lcrypt
-endif
-
-
-OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o tdb.o tty.o
-
-
-pppd: $(OBJS)
-	$(DIET) gcc -o $@ $^ $(LIBS)
-	$(STRIPCMD) $@
-	cp -f $@ $(BINTARGET)
-
-$(OBJS): %.o: %.c
-	$(DIET) gcc $(FLAGS) $(INCS) $(INCLUDES) -c $< -o $@
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux b/mdk-stage1/ppp/pppd/Makefile.linux
deleted file mode 100644
index 47d6ba01e..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux
+++ /dev/null
@@ -1,129 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-	   ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
-	   demand.c utils.c multilink.c tdb.c tty.c
-HEADERS =  callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
-	   ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-	   auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
-	   tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-CC = gcc
-#
-COPTS = -Wall $(RPM_OPT_FLAGS)
-LIBS = -lutil
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS   += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS     := -ldes $(LIBS)
-else
-CFLAGS   += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS   += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS   += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS   += -DHAS_SHADOW
-#LIBS     := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS   += -DUSE_PAM
-LIBS     := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS     := -llock $(LIBS)
-CFLAGS   += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS	+= -DPLUGIN
-LDFLAGS	+= -Wl,-E
-LIBS	+= -ldl
-endif
-
-ifdef FILTER
-LIBS    += -lpcap
-CFLAGS  += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
-     PPPDSRCS += ipv6cp.c eui64.c
-     HEADERS  += ipv6cp.h eui64.h
-     PPPDOBJS += ipv6cp.o eui64.o
-     CFLAGS   += -DINET6=1
-endif
-
-
-INSTALL= install
-
-install: pppd
-	mkdir -p $(BINDIR) $(MANDIR)
-	$(INSTALL)  -m 555 pppd $(BINDIR)/pppd
-	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
-	rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
-	$(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux.make b/mdk-stage1/ppp/pppd/Makefile.linux.make
deleted file mode 100644
index d98a32562..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux.make
+++ /dev/null
@@ -1,131 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = /usr/sbin
-MANDIR = /usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-	   ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
-	   demand.c utils.c multilink.c tdb.c tty.c
-HEADERS =  callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
-	   ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-	   auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
-	   tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-# CC = gcc
-#
-COPTS = -O2 -pipe -Wall -g
-LIBS =
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-#USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS   += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS     := -ldes $(LIBS)
-else
-CFLAGS   += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS   += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS   += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS   += -DHAS_SHADOW
-#LIBS     := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS   += -DUSE_PAM
-LIBS     := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS     := -llock $(LIBS)
-CFLAGS   += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS	+= -DPLUGIN
-LDFLAGS	+= -Wl,-E
-LIBS	+= -ldl
-endif
-
-ifdef FILTER
-LIBS    += -lpcap
-CFLAGS  += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
-     PPPDSRCS += ipv6cp.c eui64.c
-     HEADERS  += ipv6cp.h eui64.h
-     PPPDOBJS += ipv6cp.o eui64.o
-     CFLAGS   += -DINET6=1
-endif
-
-
-INSTALL= install -o root
-
-install: pppd
-	mkdir -p $(BINDIR) $(MANDIR)
-	$(INSTALL) -s -c -m 555 pppd $(BINDIR)/pppd
-	if chgrp pppusers $(BINDIR)/pppd 2>/dev/null; then \
-	  chmod o-rx,u+s $(BINDIR)/pppd; fi
-	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
-	rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
-	$(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.linux.makeopt b/mdk-stage1/ppp/pppd/Makefile.linux.makeopt
deleted file mode 100644
index 3094c941c..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.linux.makeopt
+++ /dev/null
@@ -1,129 +0,0 @@
-#
-# pppd makefile for Linux
-# $Id$
-#
-
-# Default installation locations
-BINDIR = $(DESTDIR)/usr/sbin
-MANDIR = $(DESTDIR)/usr/man
-
-PPPDSRCS = main.c magic.c fsm.c lcp.c ipcp.c upap.c chap.c md5.c ccp.c \
-	   ipxcp.c auth.c options.c sys-linux.c md4.c chap_ms.c cbcp.c \
-	   demand.c utils.c multilink.c tdb.c tty.c
-HEADERS =  callout.h pathnames.h patchlevel.h chap.h md5.h chap_ms.h md4.h \
-	   ipxcp.h cbcp.h tdb.h
-MANPAGES = pppd.8
-PPPDOBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-	   auth.o options.o demand.o utils.o sys-linux.o ipxcp.o multilink.o \
-	   tdb.o tty.o
-
-all: pppd
-
-#
-# include dependancies if present and backup if as a header file
-ifeq (.depend,$(wildcard .depend))
-include .depend
-endif
-
-CC = gcc
-#
-COPTS = -O2 -pipe -Wall -g
-LIBS = -lutil
-
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-LIBS += -lcrypt
-endif
-
-# Uncomment the next 2 lines to include support for Microsoft's
-# MS-CHAP authentication protocol.
-CHAPMS=y
-USE_CRYPT=y
-ifneq ($(wildcard /usr/lib/libcrypt.*),)
-HAVE_CRYPT_H=y
-endif
-
-# Uncomment the next line to include support for PPP packet filtering.
-# This requires that the libpcap library and headers be installed
-# and that the kernel driver support PPP packet filtering, which it
-# doesn't yet.
-#FILTER=y
-
-HAS_SHADOW=y
-USE_PAM=y
-#HAVE_INET6=y
-
-PLUGIN=y
-
-INCLUDE_DIRS= -I../include
-
-COMPILE_FLAGS= -D_linux_=1 -DHAVE_PATHS_H -DIPX_CHANGE -DHAVE_MULTILINK -DHAVE_MMAP
-
-CFLAGS= $(COPTS) $(COMPILE_FLAGS) $(INCLUDE_DIRS)
-
-ifdef CHAPMS
-CFLAGS   += -DCHAPMS=1
-ifndef USE_CRYPT
-LIBS     := -ldes $(LIBS)
-else
-CFLAGS   += -DUSE_CRYPT=1
-ifneq ($(wildcard /usr/include/crypt.h),)
-CFLAGS   += -DHAVE_CRYPT_H=1
-endif
-endif
-PPPDOBJS += md4.o chap_ms.o
-ifdef MSLANMAN
-CFLAGS   += -DMSLANMAN=1
-endif
-endif
-
-ifdef HAS_SHADOW
-CFLAGS   += -DHAS_SHADOW
-#LIBS     := -lshadow $(LIBS)
-endif
-
-# For "Pluggable Authentication Modules", see ftp.redhat.com:/pub/pam/.
-ifdef USE_PAM
-CFLAGS   += -DUSE_PAM
-LIBS     := -lpam -ldl $(LIBS)
-endif
-
-# Lock library binary for Linux is included in 'linux' subdirectory.
-ifdef LOCKLIB
-LIBS     := -llock $(LIBS)
-CFLAGS   += -DLOCKLIB=1
-endif
-
-ifdef PLUGIN
-CFLAGS	+= -DPLUGIN
-LDFLAGS	+= -Wl,-E
-LIBS	+= -ldl
-endif
-
-ifdef FILTER
-LIBS    += -lpcap
-CFLAGS  += -DPPP_FILTER -I/usr/include/pcap
-endif
-
-ifdef HAVE_INET6
-     PPPDSRCS += ipv6cp.c eui64.c
-     HEADERS  += ipv6cp.h eui64.h
-     PPPDOBJS += ipv6cp.o eui64.o
-     CFLAGS   += -DINET6=1
-endif
-
-
-INSTALL= install
-
-install: pppd
-	mkdir -p $(BINDIR) $(MANDIR)
-	$(INSTALL)  -m 555 pppd $(BINDIR)/pppd
-	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8
-
-pppd: $(PPPDOBJS)
-	$(CC) $(CFLAGS) $(LDFLAGS) -o pppd $(PPPDOBJS) $(LIBS)
-
-clean:
-	rm -f $(PPPDOBJS) pppd *~ #* core
-
-depend:
-	$(CPP) -M $(CFLAGS) $(PPPDSRCS) >.depend
diff --git a/mdk-stage1/ppp/pppd/Makefile.sol2 b/mdk-stage1/ppp/pppd/Makefile.sol2
deleted file mode 100644
index dfdcddd97..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.sol2
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# Makefile for pppd under Solaris 2.
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-COPTS	+= -xO2 -xspace -W0,-Lt
-CFLAGS	=  -I../include -DSVR4 -DSOL2 $(COPTS)
-LIBS	= -lsocket -lnsl
-
-OBJS	=  main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o tty.o \
-	ccp.o auth.o options.o demand.o utils.o	sys-solaris.o tdb.o
-
-#
-# uncomment the following to enable plugins
-#
-CFLAGS	+= -DPLUGIN
-LIBS	+= -ldl
-
-#
-# Solaris 8 and above accomodates /var/run, so uncomment the
-# following to place pppd process IDs on that location
-#
-#CFLAGS += -D_PATH_VARRUN='"/var/run/"'
-
-#
-# uncomment the following to enable IPv6
-#
-# Solaris 8 and on includes support for IPv6
-#
-#CFLAGS	+= -DINET6
-#OBJS	+= ipv6cp.o eui64.o
-
-#
-# Make targets
-#
-all: pppd
-
-pppd:	$(OBJS)
-	$(CC) -o pppd $(OBJS) $(LIBS)
-
-install:
-	$(INSTALL) -f $(BINDIR) -m 4755 -u root pppd
-	$(INSTALL) -f $(MANDIR)/man8 -m 444 pppd.8
-
-clean:
-	rm -f $(OBJS) pppd *~ core y.tab.c y.tab.h
diff --git a/mdk-stage1/ppp/pppd/Makefile.sunos4 b/mdk-stage1/ppp/pppd/Makefile.sunos4
deleted file mode 100644
index 694ac341f..000000000
--- a/mdk-stage1/ppp/pppd/Makefile.sunos4
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for pppd under SunOS 4.
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-LIBS =
-
-CFLAGS = $(COPTS) -I../include -DSUNOS4 -DGIDSET_TYPE=int \
-	-DLOCK_DIR=\"/usr/spool/locks\"
-
-all: pppd
-
-OBJS = main.o magic.o fsm.o lcp.o ipcp.o upap.o chap.o md5.o ccp.o \
-	auth.o options.o demand.o utils.o sys-sunos4.o tty.o
-
-pppd:	$(OBJS)
-	$(CC) -o pppd $(OBJS) $(LIBS)
-
-install:
-	$(INSTALL) -c -m 4555 pppd $(BINDIR)/pppd
-	$(INSTALL) -c -m 444 pppd.8 $(MANDIR)/man8/pppd.8
-
-clean:
-	rm -f $(OBJS) pppd *~ core
diff --git a/mdk-stage1/ppp/pppd/auth.c b/mdk-stage1/ppp/pppd/auth.c
deleted file mode 100644
index 5f95a2982..000000000
--- a/mdk-stage1/ppp/pppd/auth.c
+++ /dev/null
@@ -1,1939 +0,0 @@
-/*
- * auth.c - PPP authentication and phase control.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <pwd.h>
-#include <grp.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <utmp.h>
-#include <fcntl.h>
-#if defined(_PATH_LASTLOG) && defined(_linux_)
-#include <lastlog.h>
-#endif
-
-#include <netdb.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#ifdef USE_PAM
-#include <security/pam_appl.h>
-#endif
-
-#ifdef HAS_SHADOW
-#include <shadow.h>
-#ifndef PW_PPP
-#define PW_PPP PW_LOGIN
-#endif
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#include "upap.h"
-#include "chap.h"
-#ifdef CBCP_SUPPORT
-#include "cbcp.h"
-#endif
-#include "pathnames.h"
-
-#include <time.h>
-
-static const char rcsid[] = RCSID;
-
-/* Bits in scan_authfile return value */
-#define NONWILD_SERVER	1
-#define NONWILD_CLIENT	2
-
-#define ISWILD(word)	(word[0] == '*' && word[1] == 0)
-
-/* The name by which the peer authenticated itself to us. */
-char peer_authname[MAXNAMELEN];
-
-/* Records which authentication operations haven't completed yet. */
-static int auth_pending[NUM_PPP];
-
-/* Set if we have successfully called plogin() */
-static int logged_in;
-
-/* List of addresses which the peer may use. */
-static struct permitted_ip *addresses[NUM_PPP];
-
-/* Wordlist giving addresses which the peer may use
-   without authenticating itself. */
-static struct wordlist *noauth_addrs;
-
-/* Extra options to apply, from the secrets file entry for the peer. */
-static struct wordlist *extra_options;
-
-/* Number of network protocols which we have opened. */
-static int num_np_open;
-
-/* Number of network protocols which have come up. */
-static int num_np_up;
-
-/* Set if we got the contents of passwd[] from the pap-secrets file. */
-static int passwd_from_file;
-
-/* Set if we require authentication only because we have a default route. */
-static bool default_auth;
-
-/* Hook to enable a plugin to control the idle time limit */
-int (*idle_time_hook) __P((struct ppp_idle *)) = NULL;
-
-/* Hook for a plugin to say whether we can possibly authenticate any peer */
-int (*pap_check_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to check the PAP user and password */
-int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
-			  struct wordlist **paddrs,
-			  struct wordlist **popts)) = NULL;
-
-/* Hook for a plugin to know about the PAP user logout */
-void (*pap_logout_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to get the PAP password for authenticating us */
-int (*pap_passwd_hook) __P((char *user, char *passwd)) = NULL;
-
-/*
- * This is used to ensure that we don't start an auth-up/down
- * script while one is already running.
- */
-enum script_state {
-    s_down,
-    s_up
-};
-
-static enum script_state auth_state = s_down;
-static enum script_state auth_script_state = s_down;
-static pid_t auth_script_pid = 0;
-
-static int used_login;		/* peer authenticated against login database */
-
-/*
- * Option variables.
- */
-bool uselogin = 0;		/* Use /etc/passwd for checking PAP */
-bool cryptpap = 0;		/* Passwords in pap-secrets are encrypted */
-bool refuse_pap = 0;		/* Don't wanna auth. ourselves with PAP */
-bool refuse_chap = 0;		/* Don't wanna auth. ourselves with CHAP */
-bool usehostname = 0;		/* Use hostname for our_name */
-bool auth_required = 0;		/* Always require authentication from peer */
-bool allow_any_ip = 0;		/* Allow peer to use any IP address */
-bool explicit_remote = 0;	/* User specified explicit remote name */
-char remote_name[MAXNAMELEN];	/* Peer's name for authentication */
-
-static char *uafname;		/* name of most recent +ua file */
-
-/* Bits in auth_pending[] */
-#define PAP_WITHPEER	1
-#define PAP_PEER	2
-#define CHAP_WITHPEER	4
-#define CHAP_PEER	8
-
-extern char *crypt __P((const char *, const char *));
-
-/* Prototypes for procedures local to this file. */
-
-static void network_phase __P((int));
-static void check_idle __P((void *));
-static void connect_time_expired __P((void *));
-static int  plogin __P((char *, char *, char **));
-static void plogout __P((void));
-static int  null_login __P((int));
-static int  get_pap_passwd __P((char *));
-static int  have_pap_secret __P((int *));
-static int  have_chap_secret __P((char *, char *, int, int *));
-static int  ip_addr_check __P((u_int32_t, struct permitted_ip *));
-static int  scan_authfile __P((FILE *, char *, char *, char *,
-			       struct wordlist **, struct wordlist **,
-			       char *));
-static void free_wordlist __P((struct wordlist *));
-static void auth_script __P((char *));
-static void auth_script_done __P((void *));
-static void set_allowed_addrs __P((int, struct wordlist *, struct wordlist *));
-static int  some_ip_ok __P((struct wordlist *));
-static int  setupapfile __P((char **));
-static int  privgroup __P((char **));
-static int  set_noauth_addr __P((char **));
-static void check_access __P((FILE *, char *));
-static int  wordlist_count __P((struct wordlist *));
-
-/*
- * Authentication-related options.
- */
-option_t auth_options[] = {
-    { "auth", o_bool, &auth_required,
-      "Require authentication from peer", OPT_PRIO | 1 },
-    { "noauth", o_bool, &auth_required,
-      "Don't require peer to authenticate", OPT_PRIOSUB | OPT_PRIV,
-      &allow_any_ip },
-    { "require-pap", o_bool, &lcp_wantoptions[0].neg_upap,
-      "Require PAP authentication from peer",
-      OPT_PRIOSUB | 1, &auth_required },
-    { "+pap", o_bool, &lcp_wantoptions[0].neg_upap,
-      "Require PAP authentication from peer",
-      OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required },
-    { "require-chap", o_bool, &lcp_wantoptions[0].neg_chap,
-      "Require CHAP authentication from peer",
-      OPT_PRIOSUB | 1, &auth_required },
-    { "+chap", o_bool, &lcp_wantoptions[0].neg_chap,
-      "Require CHAP authentication from peer",
-      OPT_ALIAS | OPT_PRIOSUB | 1, &auth_required },
-
-    { "refuse-pap", o_bool, &refuse_pap,
-      "Don't agree to auth to peer with PAP", 1 },
-    { "-pap", o_bool, &refuse_pap,
-      "Don't allow PAP authentication with peer", OPT_ALIAS | 1 },
-
-    { "refuse-chap", o_bool, &refuse_chap,
-      "Don't agree to auth to peer with CHAP", 1 },
-    { "-chap", o_bool, &refuse_chap,
-      "Don't allow CHAP authentication with peer", OPT_ALIAS | 1 },
-
-    { "name", o_string, our_name,
-      "Set local name for authentication",
-      OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXNAMELEN },
-
-    { "+ua", o_special, (void *)setupapfile,
-      "Get PAP user and password from file",
-      OPT_PRIO | OPT_A2STRVAL, &uafname },
-
-    { "user", o_string, user,
-      "Set name for auth with peer", OPT_PRIO | OPT_STATIC, NULL, MAXNAMELEN },
-
-    { "password", o_string, passwd,
-      "Password for authenticating us to the peer",
-      OPT_PRIO | OPT_STATIC | OPT_HIDE, NULL, MAXSECRETLEN },
-
-    { "usehostname", o_bool, &usehostname,
-      "Must use hostname for authentication", 1 },
-
-    { "remotename", o_string, remote_name,
-      "Set remote name for authentication", OPT_PRIO | OPT_STATIC,
-      &explicit_remote, MAXNAMELEN },
-
-    { "login", o_bool, &uselogin,
-      "Use system password database for PAP", 1 },
-
-    { "papcrypt", o_bool, &cryptpap,
-      "PAP passwords are encrypted", 1 },
-
-    { "privgroup", o_special, (void *)privgroup,
-      "Allow group members to use privileged options", OPT_PRIV | OPT_A2LIST },
-
-    { "allow-ip", o_special, (void *)set_noauth_addr,
-      "Set IP address(es) which can be used without authentication",
-      OPT_PRIV | OPT_A2LIST },
-
-    { NULL }
-};
-
-/*
- * setupapfile - specifies UPAP info for authenticating with peer.
- */
-static int
-setupapfile(argv)
-    char **argv;
-{
-    FILE *ufile;
-    int l;
-    char u[MAXNAMELEN], p[MAXSECRETLEN];
-    char *fname;
-
-    lcp_allowoptions[0].neg_upap = 1;
-
-    /* open user info file */
-    fname = strdup(*argv);
-    if (fname == NULL)
-	novm("+ua file name");
-    seteuid(getuid());
-    ufile = fopen(fname, "r");
-    seteuid(0);
-    if (ufile == NULL) {
-	option_error("unable to open user login data file %s", fname);
-	return 0;
-    }
-    check_access(ufile, fname);
-    uafname = fname;
-
-    /* get username */
-    if (fgets(u, MAXNAMELEN - 1, ufile) == NULL
-	|| fgets(p, MAXSECRETLEN - 1, ufile) == NULL){
-	option_error("unable to read user login data file %s", fname);
-	return 0;
-    }
-    fclose(ufile);
-
-    /* get rid of newlines */
-    l = strlen(u);
-    if (l > 0 && u[l-1] == '\n')
-	u[l-1] = 0;
-    l = strlen(p);
-    if (l > 0 && p[l-1] == '\n')
-	p[l-1] = 0;
-
-    if (override_value("user", option_priority, fname))
-	strlcpy(user, u, sizeof(user));
-    if (override_value("passwd", option_priority, fname))
-	strlcpy(passwd, p, sizeof(passwd));
-
-    return (1);
-}
-
-
-/*
- * privgroup - allow members of the group to have privileged access.
- */
-static int
-privgroup(argv)
-    char **argv;
-{
-    struct group *g;
-    int i;
-
-    g = getgrnam(*argv);
-    if (g == 0) {
-	option_error("group %s is unknown", *argv);
-	return 0;
-    }
-    for (i = 0; i < ngroups; ++i) {
-	if (groups[i] == g->gr_gid) {
-	    privileged = 1;
-	    break;
-	}
-    }
-    return 1;
-}
-
-
-/*
- * set_noauth_addr - set address(es) that can be used without authentication.
- * Equivalent to specifying an entry like `"" * "" addr' in pap-secrets.
- */
-static int
-set_noauth_addr(argv)
-    char **argv;
-{
-    char *addr = *argv;
-    int l = strlen(addr) + 1;
-    struct wordlist *wp;
-
-    wp = (struct wordlist *) malloc(sizeof(struct wordlist) + l);
-    if (wp == NULL)
-	novm("allow-ip argument");
-    wp->word = (char *) (wp + 1);
-    wp->next = noauth_addrs;
-    BCOPY(addr, wp->word, l);
-    noauth_addrs = wp;
-    return 1;
-}
-
-
-/*
- * An Open on LCP has requested a change from Dead to Establish phase.
- * Do what's necessary to bring the physical layer up.
- */
-void
-link_required(unit)
-    int unit;
-{
-}
-
-/*
- * LCP has terminated the link; go to the Dead phase and take the
- * physical layer down.
- */
-void
-link_terminated(unit)
-    int unit;
-{
-    if (phase == PHASE_DEAD)
-	return;
-    if (pap_logout_hook) {
-	pap_logout_hook();
-    } else {
-	if (logged_in)
-	    plogout();
-    }
-    new_phase(PHASE_DEAD);
-    notice("Connection terminated.");
-}
-
-/*
- * LCP has gone down; it will either die or try to re-establish.
- */
-void
-link_down(unit)
-    int unit;
-{
-    int i;
-    struct protent *protp;
-
-    auth_state = s_down;
-    if (auth_script_state == s_up && auth_script_pid == 0) {
-	update_link_stats(unit);
-	auth_script_state = s_down;
-	auth_script(_PATH_AUTHDOWN);
-    }
-    for (i = 0; (protp = protocols[i]) != NULL; ++i) {
-	if (!protp->enabled_flag)
-	    continue;
-        if (protp->protocol != PPP_LCP && protp->lowerdown != NULL)
-	    (*protp->lowerdown)(unit);
-        if (protp->protocol < 0xC000 && protp->close != NULL)
-	    (*protp->close)(unit, "LCP down");
-    }
-    num_np_open = 0;
-    num_np_up = 0;
-    if (phase != PHASE_DEAD)
-	new_phase(PHASE_TERMINATE);
-}
-
-/*
- * The link is established.
- * Proceed to the Dead, Authenticate or Network phase as appropriate.
- */
-void
-link_established(unit)
-    int unit;
-{
-    int auth;
-    lcp_options *wo = &lcp_wantoptions[unit];
-    lcp_options *go = &lcp_gotoptions[unit];
-    lcp_options *ho = &lcp_hisoptions[unit];
-    int i;
-    struct protent *protp;
-
-    /*
-     * Tell higher-level protocols that LCP is up.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-        if (protp->protocol != PPP_LCP && protp->enabled_flag
-	    && protp->lowerup != NULL)
-	    (*protp->lowerup)(unit);
-
-    if (auth_required && !(go->neg_chap || go->neg_upap)) {
-	/*
-	 * We wanted the peer to authenticate itself, and it refused:
-	 * if we have some address(es) it can use without auth, fine,
-	 * otherwise treat it as though it authenticated with PAP using
-	 * a username * of "" and a password of "".  If that's not OK,
-	 * boot it out.
-	 */
-	if (noauth_addrs != NULL) {
-	    set_allowed_addrs(unit, NULL, NULL);
-	} else if (!wo->neg_upap || uselogin || !null_login(unit)) {
-	    warn("peer refused to authenticate: terminating link");
-	    lcp_close(unit, "peer refused to authenticate");
-	    status = EXIT_PEER_AUTH_FAILED;
-	    return;
-	}
-    }
-
-    new_phase(PHASE_AUTHENTICATE);
-    used_login = 0;
-    auth = 0;
-    if (go->neg_chap) {
-	ChapAuthPeer(unit, our_name, go->chap_mdtype);
-	auth |= CHAP_PEER;
-    } else if (go->neg_upap) {
-	upap_authpeer(unit);
-	auth |= PAP_PEER;
-    }
-    if (ho->neg_chap) {
-	ChapAuthWithPeer(unit, user, ho->chap_mdtype);
-	auth |= CHAP_WITHPEER;
-    } else if (ho->neg_upap) {
-	if (passwd[0] == 0) {
-	    passwd_from_file = 1;
-	    if (!get_pap_passwd(passwd))
-		error("No secret found for PAP login");
-	}
-	upap_authwithpeer(unit, user, passwd);
-	auth |= PAP_WITHPEER;
-    }
-    auth_pending[unit] = auth;
-
-    if (!auth)
-	network_phase(unit);
-}
-
-/*
- * Proceed to the network phase.
- */
-static void
-network_phase(unit)
-    int unit;
-{
-    lcp_options *go = &lcp_gotoptions[unit];
-
-    /*
-     * If the peer had to authenticate, run the auth-up script now.
-     */
-    if (go->neg_chap || go->neg_upap) {
-	auth_state = s_up;
-	if (auth_script_state == s_down && auth_script_pid == 0) {
-	    auth_script_state = s_up;
-	    auth_script(_PATH_AUTHUP);
-	}
-    }
-
-#ifdef CBCP_SUPPORT
-    /*
-     * If we negotiated callback, do it now.
-     */
-    if (go->neg_cbcp) {
-	new_phase(PHASE_CALLBACK);
-	(*cbcp_protent.open)(unit);
-	return;
-    }
-#endif
-
-    /*
-     * Process extra options from the secrets file
-     */
-    if (extra_options) {
-	options_from_list(extra_options, 1);
-	free_wordlist(extra_options);
-	extra_options = 0;
-    }
-    start_networks();
-}
-
-void
-start_networks()
-{
-    int i;
-    struct protent *protp;
-
-    new_phase(PHASE_NETWORK);
-
-#ifdef HAVE_MULTILINK
-    if (multilink) {
-	if (mp_join_bundle()) {
-	    if (updetach && !nodetach)
-		detach();
-	    return;
-	}
-    }
-#endif /* HAVE_MULTILINK */
-
-#ifdef PPP_FILTER
-    if (!demand)
-	set_filters(&pass_filter, &active_filter);
-#endif
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-        if (protp->protocol < 0xC000 && protp->enabled_flag
-	    && protp->open != NULL) {
-	    (*protp->open)(0);
-	    if (protp->protocol != PPP_CCP)
-		++num_np_open;
-	}
-
-    if (num_np_open == 0)
-	/* nothing to do */
-	lcp_close(0, "No network protocols running");
-}
-
-/*
- * The peer has failed to authenticate himself using `protocol'.
- */
-void
-auth_peer_fail(unit, protocol)
-    int unit, protocol;
-{
-    /*
-     * Authentication failure: take the link down
-     */
-    lcp_close(unit, "Authentication failed");
-    status = EXIT_PEER_AUTH_FAILED;
-}
-
-/*
- * The peer has been successfully authenticated using `protocol'.
- */
-void
-auth_peer_success(unit, protocol, name, namelen)
-    int unit, protocol;
-    char *name;
-    int namelen;
-{
-    int bit;
-
-    switch (protocol) {
-    case PPP_CHAP:
-	bit = CHAP_PEER;
-	break;
-    case PPP_PAP:
-	bit = PAP_PEER;
-	break;
-    default:
-	warn("auth_peer_success: unknown protocol %x", protocol);
-	return;
-    }
-
-    /*
-     * Save the authenticated name of the peer for later.
-     */
-    if (namelen > sizeof(peer_authname) - 1)
-	namelen = sizeof(peer_authname) - 1;
-    BCOPY(name, peer_authname, namelen);
-    peer_authname[namelen] = 0;
-    script_setenv("PEERNAME", peer_authname, 0);
-
-    /*
-     * If there is no more authentication still to be done,
-     * proceed to the network (or callback) phase.
-     */
-    if ((auth_pending[unit] &= ~bit) == 0)
-        network_phase(unit);
-}
-
-/*
- * We have failed to authenticate ourselves to the peer using `protocol'.
- */
-void
-auth_withpeer_fail(unit, protocol)
-    int unit, protocol;
-{
-    if (passwd_from_file)
-	BZERO(passwd, MAXSECRETLEN);
-    /*
-     * We've failed to authenticate ourselves to our peer.
-     * Some servers keep sending CHAP challenges, but there
-     * is no point in persisting without any way to get updated
-     * authentication secrets.
-     */
-    lcp_close(unit, "Failed to authenticate ourselves to peer");
-    status = EXIT_AUTH_TOPEER_FAILED;
-}
-
-/*
- * We have successfully authenticated ourselves with the peer using `protocol'.
- */
-void
-auth_withpeer_success(unit, protocol)
-    int unit, protocol;
-{
-    int bit;
-
-    switch (protocol) {
-    case PPP_CHAP:
-	bit = CHAP_WITHPEER;
-	break;
-    case PPP_PAP:
-	if (passwd_from_file)
-	    BZERO(passwd, MAXSECRETLEN);
-	bit = PAP_WITHPEER;
-	break;
-    default:
-	warn("auth_withpeer_success: unknown protocol %x", protocol);
-	bit = 0;
-    }
-
-    /*
-     * If there is no more authentication still being done,
-     * proceed to the network (or callback) phase.
-     */
-    if ((auth_pending[unit] &= ~bit) == 0)
-	network_phase(unit);
-}
-
-
-/*
- * np_up - a network protocol has come up.
- */
-void
-np_up(unit, proto)
-    int unit, proto;
-{
-    int tlim;
-
-    if (num_np_up == 0) {
-	/*
-	 * At this point we consider that the link has come up successfully.
-	 */
-	status = EXIT_OK;
-	unsuccess = 0;
-	new_phase(PHASE_RUNNING);
-
-	if (idle_time_hook != 0)
-	    tlim = (*idle_time_hook)(NULL);
-	else
-	    tlim = idle_time_limit;
-	if (tlim > 0)
-	    TIMEOUT(check_idle, NULL, tlim);
-
-	/*
-	 * Set a timeout to close the connection once the maximum
-	 * connect time has expired.
-	 */
-	if (maxconnect > 0)
-	    TIMEOUT(connect_time_expired, 0, maxconnect);
-
-	/*
-	 * Detach now, if the updetach option was given.
-	 */
-	if (updetach && !nodetach)
-	    detach();
-    }
-    ++num_np_up;
-}
-
-/*
- * np_down - a network protocol has gone down.
- */
-void
-np_down(unit, proto)
-    int unit, proto;
-{
-    if (--num_np_up == 0) {
-	UNTIMEOUT(check_idle, NULL);
-	new_phase(PHASE_NETWORK);
-    }
-}
-
-/*
- * np_finished - a network protocol has finished using the link.
- */
-void
-np_finished(unit, proto)
-    int unit, proto;
-{
-    if (--num_np_open <= 0) {
-	/* no further use for the link: shut up shop. */
-	lcp_close(0, "No network protocols running");
-    }
-}
-
-/*
- * check_idle - check whether the link has been idle for long
- * enough that we can shut it down.
- */
-static void
-check_idle(arg)
-    void *arg;
-{
-    struct ppp_idle idle;
-    time_t itime;
-    int tlim;
-
-    if (!get_idle_time(0, &idle))
-	return;
-    if (idle_time_hook != 0) {
-	tlim = idle_time_hook(&idle);
-    } else {
-	itime = MIN(idle.xmit_idle, idle.recv_idle);
-	tlim = idle_time_limit - itime;
-    }
-    if (tlim <= 0) {
-	/* link is idle: shut it down. */
-	notice("Terminating connection due to lack of activity.");
-	lcp_close(0, "Link inactive");
-	need_holdoff = 0;
-	status = EXIT_IDLE_TIMEOUT;
-    } else {
-	TIMEOUT(check_idle, NULL, tlim);
-    }
-}
-
-/*
- * connect_time_expired - log a message and close the connection.
- */
-static void
-connect_time_expired(arg)
-    void *arg;
-{
-    info("Connect time expired");
-    lcp_close(0, "Connect time expired");	/* Close connection */
-    status = EXIT_CONNECT_TIME;
-}
-
-/*
- * auth_check_options - called to check authentication options.
- */
-void
-auth_check_options()
-{
-    lcp_options *wo = &lcp_wantoptions[0];
-    int can_auth;
-    int lacks_ip;
-
-    /* Default our_name to hostname, and user to our_name */
-    if (our_name[0] == 0 || usehostname)
-	strlcpy(our_name, hostname, sizeof(our_name));
-    if (user[0] == 0)
-	strlcpy(user, our_name, sizeof(user));
-
-    /*
-     * If we have a default route, require the peer to authenticate
-     * unless the noauth option was given or the real user is root.
-     */
-    if (!auth_required && !allow_any_ip && have_route_to(0) && !privileged) {
-	auth_required = 1;
-	default_auth = 1;
-    }
-
-    /* If authentication is required, ask peer for CHAP or PAP. */
-    if (auth_required) {
-	allow_any_ip = 0;
-	if (!wo->neg_chap && !wo->neg_upap) {
-	    wo->neg_chap = 1;
-	    wo->neg_upap = 1;
-	}
-    } else {
-	wo->neg_chap = 0;
-	wo->neg_upap = 0;
-    }
-
-    /*
-     * Check whether we have appropriate secrets to use
-     * to authenticate the peer.
-     */
-    lacks_ip = 0;
-    can_auth = wo->neg_upap && (uselogin || have_pap_secret(&lacks_ip));
-    if (!can_auth && wo->neg_chap) {
-	can_auth = have_chap_secret((explicit_remote? remote_name: NULL),
-				    our_name, 1, &lacks_ip);
-    }
-
-    if (auth_required && !can_auth && noauth_addrs == NULL) {
-	if (default_auth) {
-	    option_error(
-"By default the remote system is required to authenticate itself");
-	    option_error(
-"(because this system has a default route to the internet)");
-	} else if (explicit_remote)
-	    option_error(
-"The remote system (%s) is required to authenticate itself",
-			 remote_name);
-	else
-	    option_error(
-"The remote system is required to authenticate itself");
-	option_error(
-"but I couldn't find any suitable secret (password) for it to use to do so.");
-	if (lacks_ip)
-	    option_error(
-"(None of the available passwords would let it use an IP address.)");
-
-	exit(1);
-    }
-}
-
-/*
- * auth_reset - called when LCP is starting negotiations to recheck
- * authentication options, i.e. whether we have appropriate secrets
- * to use for authenticating ourselves and/or the peer.
- */
-void
-auth_reset(unit)
-    int unit;
-{
-    lcp_options *go = &lcp_gotoptions[unit];
-    lcp_options *ao = &lcp_allowoptions[0];
-
-    ao->neg_upap = !refuse_pap && (passwd[0] != 0 || get_pap_passwd(NULL));
-    ao->neg_chap = !refuse_chap
-	&& (passwd[0] != 0
-	    || have_chap_secret(user, (explicit_remote? remote_name: NULL),
-				0, NULL));
-
-    if (go->neg_upap && !uselogin && !have_pap_secret(NULL))
-	go->neg_upap = 0;
-    if (go->neg_chap) {
-	if (!have_chap_secret((explicit_remote? remote_name: NULL),
-			      our_name, 1, NULL))
-	    go->neg_chap = 0;
-    }
-}
-
-
-/*
- * check_passwd - Check the user name and passwd against the PAP secrets
- * file.  If requested, also check against the system password database,
- * and login the user if OK.
- *
- * returns:
- *	UPAP_AUTHNAK: Authentication failed.
- *	UPAP_AUTHACK: Authentication succeeded.
- * In either case, msg points to an appropriate message.
- */
-int
-check_passwd(unit, auser, userlen, apasswd, passwdlen, msg)
-    int unit;
-    char *auser;
-    int userlen;
-    char *apasswd;
-    int passwdlen;
-    char **msg;
-{
-    int ret;
-    char *filename;
-    FILE *f;
-    struct wordlist *addrs = NULL, *opts = NULL;
-    char passwd[256], user[256];
-    char secret[MAXWORDLEN];
-    static int attempts = 0;
-
-    /*
-     * Make copies of apasswd and auser, then null-terminate them.
-     * If there are unprintable characters in the password, make
-     * them visible.
-     */
-    slprintf(passwd, sizeof(passwd), "%.*v", passwdlen, apasswd);
-    slprintf(user, sizeof(user), "%.*v", userlen, auser);
-    *msg = "";
-
-    /*
-     * Check if a plugin wants to handle this.
-     */
-    if (pap_auth_hook) {
-	ret = (*pap_auth_hook)(user, passwd, msg, &addrs, &opts);
-	if (ret >= 0) {
-	    if (ret)
-		set_allowed_addrs(unit, addrs, opts);
-	    BZERO(passwd, sizeof(passwd));
-	    if (addrs != 0)
-		free_wordlist(addrs);
-	    return ret? UPAP_AUTHACK: UPAP_AUTHNAK;
-	}
-    }
-
-    /*
-     * Open the file of pap secrets and scan for a suitable secret
-     * for authenticating this user.
-     */
-    filename = _PATH_UPAPFILE;
-    addrs = opts = NULL;
-    ret = UPAP_AUTHNAK;
-    f = fopen(filename, "r");
-    if (f == NULL) {
-	error("Can't open PAP password file %s: %m", filename);
-
-    } else {
-	check_access(f, filename);
-	if (scan_authfile(f, user, our_name, secret, &addrs, &opts, filename) < 0) {
-	    warn("no PAP secret found for %s", user);
-	} else {
-	    /*
-	     * If the secret is "@login", it means to check
-	     * the password against the login database.
-	     */
-	    int login_secret = strcmp(secret, "@login") == 0;
-	    ret = UPAP_AUTHACK;
-	    if (uselogin || login_secret) {
-		/* login option or secret is @login */
-		ret = plogin(user, passwd, msg);
-		if (ret == UPAP_AUTHNAK)
-		    warn("PAP login failure for %s", user);
-		else
-		    used_login = 1;
-	    }
-	    if (secret[0] != 0 && !login_secret) {
-		/* password given in pap-secrets - must match */
-		if ((cryptpap || strcmp(passwd, secret) != 0)
-		    && strcmp(crypt(passwd, secret), secret) != 0) {
-		    ret = UPAP_AUTHNAK;
-		    warn("PAP authentication failure for %s", user);
-		}
-	    }
-	}
-	fclose(f);
-    }
-
-    if (ret == UPAP_AUTHNAK) {
-        if (**msg == 0)
-	    *msg = "Login incorrect";
-	/*
-	 * XXX can we ever get here more than once??
-	 * Frustrate passwd stealer programs.
-	 * Allow 10 tries, but start backing off after 3 (stolen from login).
-	 * On 10'th, drop the connection.
-	 */
-	if (attempts++ >= 10) {
-	    warn("%d LOGIN FAILURES ON %s, %s", attempts, devnam, user);
-	    lcp_close(unit, "login failed");
-	}
-	if (attempts > 3)
-	    sleep((u_int) (attempts - 3) * 5);
-	if (opts != NULL)
-	    free_wordlist(opts);
-
-    } else {
-	attempts = 0;			/* Reset count */
-	if (**msg == 0)
-	    *msg = "Login ok";
-	set_allowed_addrs(unit, addrs, opts);
-    }
-
-    if (addrs != NULL)
-	free_wordlist(addrs);
-    BZERO(passwd, sizeof(passwd));
-    BZERO(secret, sizeof(secret));
-
-    return ret;
-}
-
-/*
- * This function is needed for PAM.
- */
-
-#ifdef USE_PAM
-/* Static variables used to communicate between the conversation function
- * and the server_login function 
- */
-static char *PAM_username;
-static char *PAM_password;
-static int PAM_error = 0;
-static pam_handle_t *pamh = NULL;
-
-/* PAM conversation function
- * Here we assume (for now, at least) that echo on means login name, and
- * echo off means password.
- */
-
-static int PAM_conv (int num_msg, const struct pam_message **msg,
-                    struct pam_response **resp, void *appdata_ptr)
-{
-    int replies = 0;
-    struct pam_response *reply = NULL;
-
-#define COPY_STRING(s) (s) ? strdup(s) : NULL
-
-    reply = malloc(sizeof(struct pam_response) * num_msg);
-    if (!reply) return PAM_CONV_ERR;
-
-    for (replies = 0; replies < num_msg; replies++) {
-        switch (msg[replies]->msg_style) {
-            case PAM_PROMPT_ECHO_ON:
-                reply[replies].resp_retcode = PAM_SUCCESS;
-                reply[replies].resp = COPY_STRING(PAM_username);
-                /* PAM frees resp */
-                break;
-            case PAM_PROMPT_ECHO_OFF:
-                reply[replies].resp_retcode = PAM_SUCCESS;
-                reply[replies].resp = COPY_STRING(PAM_password);
-                /* PAM frees resp */
-                break;
-            case PAM_TEXT_INFO:
-                /* fall through */
-            case PAM_ERROR_MSG:
-                /* ignore it, but pam still wants a NULL response... */
-                reply[replies].resp_retcode = PAM_SUCCESS;
-                reply[replies].resp = NULL;
-                break;
-            default:       
-                /* Must be an error of some sort... */
-                free (reply);
-                PAM_error = 1;
-                return PAM_CONV_ERR;
-        }
-    }
-    *resp = reply;     
-    return PAM_SUCCESS;
-}
-
-static struct pam_conv PAM_conversation = {
-    &PAM_conv,
-    NULL
-};
-#endif  /* USE_PAM */
-
-/*
- * plogin - Check the user name and password against the system
- * password database, and login the user if OK.
- *
- * returns:
- *	UPAP_AUTHNAK: Login failed.
- *	UPAP_AUTHACK: Login succeeded.
- * In either case, msg points to an appropriate message.
- */
-
-static int
-plogin(user, passwd, msg)
-    char *user;
-    char *passwd;
-    char **msg;
-{
-    char *tty;
-
-#ifdef USE_PAM
-    int pam_error;
-
-    pam_error = pam_start ("ppp", user, &PAM_conversation, &pamh);
-    if (pam_error != PAM_SUCCESS) {
-        *msg = (char *) pam_strerror (pamh, pam_error);
-	reopen_log();
-	return UPAP_AUTHNAK;
-    }
-    /*
-     * Define the fields for the credential validation
-     */
-     
-    PAM_username = user;
-    PAM_password = passwd;
-    PAM_error = 0;
-    pam_set_item (pamh, PAM_TTY, devnam); /* this might be useful to some modules */
-
-    /*
-     * Validate the user
-     */
-    pam_error = pam_authenticate (pamh, PAM_SILENT);
-    if (pam_error == PAM_SUCCESS && !PAM_error) {    
-        pam_error = pam_acct_mgmt (pamh, PAM_SILENT);
-        if (pam_error == PAM_SUCCESS)
-	    pam_error = pam_open_session (pamh, PAM_SILENT);
-    }
-
-    *msg = (char *) pam_strerror (pamh, pam_error);
-
-    /*
-     * Clean up the mess
-     */
-    reopen_log();	/* apparently the PAM stuff does closelog() */
-    PAM_username = NULL;
-    PAM_password = NULL;
-    if (pam_error != PAM_SUCCESS)
-        return UPAP_AUTHNAK;
-#else /* #ifdef USE_PAM */
-
-/*
- * Use the non-PAM methods directly
- */
-
-#ifdef HAS_SHADOW
-    struct spwd *spwd;
-    struct spwd *getspnam();
-#endif
-    struct passwd *pw = getpwnam(user);
-
-    endpwent();
-    if (pw == NULL)
-	return (UPAP_AUTHNAK);
-
-#ifdef HAS_SHADOW
-    spwd = getspnam(user);
-    endspent();
-    if (spwd) {
-	/* check the age of the password entry */
-	long now = time(NULL) / 86400L;
-
-	if ((spwd->sp_expire > 0 && now >= spwd->sp_expire)
-	    || ((spwd->sp_max >= 0 && spwd->sp_max < 10000)
-		&& spwd->sp_lstchg >= 0
-		&& now >= spwd->sp_lstchg + spwd->sp_max)) {
-	    warn("Password for %s has expired", user);
-	    return (UPAP_AUTHNAK);
-	}
-	pw->pw_passwd = spwd->sp_pwdp;
-    }
-#endif
-
-    /*
-     * If no passwd, don't let them login.
-     */
-    if (pw->pw_passwd == NULL || strlen(pw->pw_passwd) < 2
-	|| strcmp(crypt(passwd, pw->pw_passwd), pw->pw_passwd) != 0)
-	return (UPAP_AUTHNAK);
-
-#endif /* #ifdef USE_PAM */
-
-    /*
-     * Write a wtmp entry for this user.
-     */
-
-    tty = devnam;
-    if (strncmp(tty, "/dev/", 5) == 0)
-	tty += 5;
-//    logwtmp(tty, user, remote_name);		/* Add wtmp login entry */
-
-#if defined(_PATH_LASTLOG) && !defined(USE_PAM)
-    if (pw != (struct passwd *)NULL) {
-	    struct lastlog ll;
-	    int fd;
-
-	    if ((fd = open(_PATH_LASTLOG, O_RDWR, 0)) >= 0) {
-		(void)lseek(fd, (off_t)(pw->pw_uid * sizeof(ll)), SEEK_SET);
-		memset((void *)&ll, 0, sizeof(ll));
-		(void)time(&ll.ll_time);
-		(void)strncpy(ll.ll_line, tty, sizeof(ll.ll_line));
-		(void)write(fd, (char *)&ll, sizeof(ll));
-		(void)close(fd);
-	    }
-    }
-#endif /* _PATH_LASTLOG and not USE_PAM */
-
-    info("user %s logged in", user);
-    logged_in = 1;
-
-    return (UPAP_AUTHACK);
-}
-
-/*
- * plogout - Logout the user.
- */
-static void
-plogout()
-{
-#ifdef USE_PAM
-    int pam_error;
-
-    if (pamh != NULL) {
-	pam_error = pam_close_session (pamh, PAM_SILENT);
-	pam_end (pamh, pam_error);
-	pamh = NULL;
-    }
-    /* Apparently the pam stuff does closelog(). */
-    reopen_log();
-#else /* ! USE_PAM */   
-    char *tty;
-
-    tty = devnam;
-    if (strncmp(tty, "/dev/", 5) == 0)
-	tty += 5;
-//    logwtmp(tty, "", "");		/* Wipe out utmp logout entry */
-#endif /* ! USE_PAM */
-    logged_in = 0;
-}
-
-
-/*
- * null_login - Check if a username of "" and a password of "" are
- * acceptable, and iff so, set the list of acceptable IP addresses
- * and return 1.
- */
-static int
-null_login(unit)
-    int unit;
-{
-    char *filename;
-    FILE *f;
-    int i, ret;
-    struct wordlist *addrs, *opts;
-    char secret[MAXWORDLEN];
-
-    /*
-     * Open the file of pap secrets and scan for a suitable secret.
-     */
-    filename = _PATH_UPAPFILE;
-    addrs = NULL;
-    f = fopen(filename, "r");
-    if (f == NULL)
-	return 0;
-    check_access(f, filename);
-
-    i = scan_authfile(f, "", our_name, secret, &addrs, &opts, filename);
-    ret = i >= 0 && secret[0] == 0;
-    BZERO(secret, sizeof(secret));
-
-    if (ret)
-	set_allowed_addrs(unit, addrs, opts);
-    else if (opts != 0)
-	free_wordlist(opts);
-    if (addrs != 0)
-	free_wordlist(addrs);
-
-    fclose(f);
-    return ret;
-}
-
-
-/*
- * get_pap_passwd - get a password for authenticating ourselves with
- * our peer using PAP.  Returns 1 on success, 0 if no suitable password
- * could be found.
- * Assumes passwd points to MAXSECRETLEN bytes of space (if non-null).
- */
-static int
-get_pap_passwd(passwd)
-    char *passwd;
-{
-    char *filename;
-    FILE *f;
-    int ret;
-    char secret[MAXWORDLEN];
-
-    /*
-     * Check whether a plugin wants to supply this.
-     */
-    if (pap_passwd_hook) {
-	ret = (*pap_passwd_hook)(user, passwd);
-	if (ret >= 0)
-	    return ret;
-    }
-
-    filename = _PATH_UPAPFILE;
-    f = fopen(filename, "r");
-    if (f == NULL)
-	return 0;
-    check_access(f, filename);
-    ret = scan_authfile(f, user,
-			(remote_name[0]? remote_name: NULL),
-			secret, NULL, NULL, filename);
-    fclose(f);
-    if (ret < 0)
-	return 0;
-    if (passwd != NULL)
-	strlcpy(passwd, secret, MAXSECRETLEN);
-    BZERO(secret, sizeof(secret));
-    return 1;
-}
-
-
-/*
- * have_pap_secret - check whether we have a PAP file with any
- * secrets that we could possibly use for authenticating the peer.
- */
-static int
-have_pap_secret(lacks_ipp)
-    int *lacks_ipp;
-{
-    FILE *f;
-    int ret;
-    char *filename;
-    struct wordlist *addrs;
-
-    /* let the plugin decide, if there is one */
-    if (pap_check_hook) {
-	ret = (*pap_check_hook)();
-	if (ret >= 0)
-	    return ret;
-    }
-
-    filename = _PATH_UPAPFILE;
-    f = fopen(filename, "r");
-    if (f == NULL)
-	return 0;
-
-    ret = scan_authfile(f, (explicit_remote? remote_name: NULL), our_name,
-			NULL, &addrs, NULL, filename);
-    fclose(f);
-    if (ret >= 0 && !some_ip_ok(addrs)) {
-	if (lacks_ipp != 0)
-	    *lacks_ipp = 1;
-	ret = -1;
-    }
-    if (addrs != 0)
-	free_wordlist(addrs);
-
-    return ret >= 0;
-}
-
-
-/*
- * have_chap_secret - check whether we have a CHAP file with a
- * secret that we could possibly use for authenticating `client'
- * on `server'.  Either can be the null string, meaning we don't
- * know the identity yet.
- */
-static int
-have_chap_secret(client, server, need_ip, lacks_ipp)
-    char *client;
-    char *server;
-    int need_ip;
-    int *lacks_ipp;
-{
-    FILE *f;
-    int ret;
-    char *filename;
-    struct wordlist *addrs;
-
-    filename = _PATH_CHAPFILE;
-    f = fopen(filename, "r");
-    if (f == NULL)
-	return 0;
-
-    if (client != NULL && client[0] == 0)
-	client = NULL;
-    else if (server != NULL && server[0] == 0)
-	server = NULL;
-
-    ret = scan_authfile(f, client, server, NULL, &addrs, NULL, filename);
-    fclose(f);
-    if (ret >= 0 && need_ip && !some_ip_ok(addrs)) {
-	if (lacks_ipp != 0)
-	    *lacks_ipp = 1;
-	ret = -1;
-    }
-    if (addrs != 0)
-	free_wordlist(addrs);
-
-    return ret >= 0;
-}
-
-
-/*
- * get_secret - open the CHAP secret file and return the secret
- * for authenticating the given client on the given server.
- * (We could be either client or server).
- */
-int
-get_secret(unit, client, server, secret, secret_len, am_server)
-    int unit;
-    char *client;
-    char *server;
-    char *secret;
-    int *secret_len;
-    int am_server;
-{
-    FILE *f;
-    int ret, len;
-    char *filename;
-    struct wordlist *addrs, *opts;
-    char secbuf[MAXWORDLEN];
-
-    if (!am_server && passwd[0] != 0) {
-	strlcpy(secbuf, passwd, sizeof(secbuf));
-    } else {
-	filename = _PATH_CHAPFILE;
-	addrs = NULL;
-	secbuf[0] = 0;
-
-	f = fopen(filename, "r");
-	if (f == NULL) {
-	    error("Can't open chap secret file %s: %m", filename);
-	    return 0;
-	}
-	check_access(f, filename);
-
-	ret = scan_authfile(f, client, server, secbuf, &addrs, &opts, filename);
-	fclose(f);
-	if (ret < 0)
-	    return 0;
-
-	if (am_server)
-	    set_allowed_addrs(unit, addrs, opts);
-	else if (opts != 0)
-	    free_wordlist(opts);
-	if (addrs != 0)
-	    free_wordlist(addrs);
-    }
-
-    len = strlen(secbuf);
-    if (len > MAXSECRETLEN) {
-	error("Secret for %s on %s is too long", client, server);
-	len = MAXSECRETLEN;
-    }
-    BCOPY(secbuf, secret, len);
-    BZERO(secbuf, sizeof(secbuf));
-    *secret_len = len;
-
-    return 1;
-}
-
-/*
- * set_allowed_addrs() - set the list of allowed addresses.
- * Also looks for `--' indicating options to apply for this peer
- * and leaves the following words in extra_options.
- */
-static void
-set_allowed_addrs(unit, addrs, opts)
-    int unit;
-    struct wordlist *addrs;
-    struct wordlist *opts;
-{
-    int n;
-    struct wordlist *ap, **plink;
-    struct permitted_ip *ip;
-    char *ptr_word, *ptr_mask;
-    struct hostent *hp;
-    u_int32_t a, mask, offset;
-    struct ipcp_options *wo = &ipcp_wantoptions[unit];
-    u_int32_t suggested_ip = 0;
-
-    if (addresses[unit] != NULL)
-	free(addresses[unit]);
-    addresses[unit] = NULL;
-    if (extra_options != NULL)
-	free_wordlist(extra_options);
-    extra_options = opts;
-
-    /*
-     * Count the number of IP addresses given.
-     */
-    n = wordlist_count(addrs) + wordlist_count(noauth_addrs);
-    if (n == 0)
-	return;
-    ip = (struct permitted_ip *) malloc((n + 1) * sizeof(struct permitted_ip));
-    if (ip == 0)
-	return;
-
-    /* temporarily append the noauth_addrs list to addrs */
-    for (plink = &addrs; *plink != NULL; plink = &(*plink)->next)
-	;
-    *plink = noauth_addrs;
-
-    n = 0;
-    for (ap = addrs; ap != NULL; ap = ap->next) {
-	/* "-" means no addresses authorized, "*" means any address allowed */
-	ptr_word = ap->word;
-	if (strcmp(ptr_word, "-") == 0)
-	    break;
-	if (strcmp(ptr_word, "*") == 0) {
-	    ip[n].permit = 1;
-	    ip[n].base = ip[n].mask = 0;
-	    ++n;
-	    break;
-	}
-
-	ip[n].permit = 1;
-	if (*ptr_word == '!') {
-	    ip[n].permit = 0;
-	    ++ptr_word;
-	}
-
-	mask = ~ (u_int32_t) 0;
-	offset = 0;
-	ptr_mask = strchr (ptr_word, '/');
-	if (ptr_mask != NULL) {
-	    int bit_count;
-	    char *endp;
-
-	    bit_count = (int) strtol (ptr_mask+1, &endp, 10);
-	    if (bit_count <= 0 || bit_count > 32) {
-		warn("invalid address length %v in auth. address list",
-		     ptr_mask+1);
-		continue;
-	    }
-	    bit_count = 32 - bit_count;	/* # bits in host part */
-	    if (*endp == '+') {
-		offset = ifunit + 1;
-		++endp;
-	    }
-	    if (*endp != 0) {
-		warn("invalid address length syntax: %v", ptr_mask+1);
-		continue;
-	    }
-	    *ptr_mask = '\0';
-	    mask <<= bit_count;
-	}
-
-	hp = gethostbyname(ptr_word);
-	if (hp != NULL && hp->h_addrtype == AF_INET) {
-	    a = *(u_int32_t *)hp->h_addr;
-	} else {
-		printf("*** getnetbyname is unsupported, please report bug! ***\n");
-		return;
-	}
-
-	if (ptr_mask != NULL)
-	    *ptr_mask = '/';
-
-	if (a == (u_int32_t)-1L) {
-	    warn("unknown host %s in auth. address list", ap->word);
-	    continue;
-	}
-	if (offset != 0) {
-	    if (offset >= ~mask) {
-		warn("interface unit %d too large for subnet %v",
-		     ifunit, ptr_word);
-		continue;
-	    }
-	    a = htonl((ntohl(a) & mask) + offset);
-	    mask = ~(u_int32_t)0;
-	}
-	ip[n].mask = htonl(mask);
-	ip[n].base = a & ip[n].mask;
-	++n;
-	if (~mask == 0 && suggested_ip == 0)
-	    suggested_ip = a;
-    }
-    *plink = NULL;
-
-    ip[n].permit = 0;		/* make the last entry forbid all addresses */
-    ip[n].base = 0;		/* to terminate the list */
-    ip[n].mask = 0;
-
-    addresses[unit] = ip;
-
-    /*
-     * If the address given for the peer isn't authorized, or if
-     * the user hasn't given one, AND there is an authorized address
-     * which is a single host, then use that if we find one.
-     */
-    if (suggested_ip != 0
-	&& (wo->hisaddr == 0 || !auth_ip_addr(unit, wo->hisaddr))) {
-	wo->hisaddr = suggested_ip;
-	/*
-	 * Do we insist on this address?  No, if there are other
-	 * addresses authorized than the suggested one.
-	 */
-	if (n > 1)
-	    wo->accept_remote = 1;
-    }
-}
-
-/*
- * auth_ip_addr - check whether the peer is authorized to use
- * a given IP address.  Returns 1 if authorized, 0 otherwise.
- */
-int
-auth_ip_addr(unit, addr)
-    int unit;
-    u_int32_t addr;
-{
-    int ok;
-
-    /* don't allow loopback or multicast address */
-    if (bad_ip_adrs(addr))
-	return 0;
-
-    if (addresses[unit] != NULL) {
-	ok = ip_addr_check(addr, addresses[unit]);
-	if (ok >= 0)
-	    return ok;
-    }
-    if (auth_required)
-	return 0;		/* no addresses authorized */
-    return allow_any_ip || privileged || !have_route_to(addr);
-}
-
-static int
-ip_addr_check(addr, addrs)
-    u_int32_t addr;
-    struct permitted_ip *addrs;
-{
-    for (; ; ++addrs)
-	if ((addr & addrs->mask) == addrs->base)
-	    return addrs->permit;
-}
-
-/*
- * bad_ip_adrs - return 1 if the IP address is one we don't want
- * to use, such as an address in the loopback net or a multicast address.
- * addr is in network byte order.
- */
-int
-bad_ip_adrs(addr)
-    u_int32_t addr;
-{
-    addr = ntohl(addr);
-    return (addr >> IN_CLASSA_NSHIFT) == IN_LOOPBACKNET
-	|| IN_MULTICAST(addr) || IN_BADCLASS(addr);
-}
-
-/*
- * some_ip_ok - check a wordlist to see if it authorizes any
- * IP address(es).
- */
-static int
-some_ip_ok(addrs)
-    struct wordlist *addrs;
-{
-    for (; addrs != 0; addrs = addrs->next) {
-	if (addrs->word[0] == '-')
-	    break;
-	if (addrs->word[0] != '!')
-	    return 1;		/* some IP address is allowed */
-    }
-    return 0;
-}
-
-/*
- * check_access - complain if a secret file has too-liberal permissions.
- */
-static void
-check_access(f, filename)
-    FILE *f;
-    char *filename;
-{
-    struct stat sbuf;
-
-    if (fstat(fileno(f), &sbuf) < 0) {
-	warn("cannot stat secret file %s: %m", filename);
-    } else if ((sbuf.st_mode & (S_IRWXG | S_IRWXO)) != 0) {
-	warn("Warning - secret file %s has world and/or group access",
-	     filename);
-    }
-}
-
-
-/*
- * scan_authfile - Scan an authorization file for a secret suitable
- * for authenticating `client' on `server'.  The return value is -1
- * if no secret is found, otherwise >= 0.  The return value has
- * NONWILD_CLIENT set if the secret didn't have "*" for the client, and
- * NONWILD_SERVER set if the secret didn't have "*" for the server.
- * Any following words on the line up to a "--" (i.e. address authorization
- * info) are placed in a wordlist and returned in *addrs.  Any
- * following words (extra options) are placed in a wordlist and
- * returned in *opts.
- * We assume secret is NULL or points to MAXWORDLEN bytes of space.
- */
-static int
-scan_authfile(f, client, server, secret, addrs, opts, filename)
-    FILE *f;
-    char *client;
-    char *server;
-    char *secret;
-    struct wordlist **addrs;
-    struct wordlist **opts;
-    char *filename;
-{
-    int newline, xxx;
-    int got_flag, best_flag;
-    FILE *sf;
-    struct wordlist *ap, *addr_list, *alist, **app;
-    char word[MAXWORDLEN];
-    char atfile[MAXWORDLEN];
-    char lsecret[MAXWORDLEN];
-
-    if (addrs != NULL)
-	*addrs = NULL;
-    if (opts != NULL)
-	*opts = NULL;
-    addr_list = NULL;
-    if (!getword(f, word, &newline, filename))
-	return -1;		/* file is empty??? */
-    newline = 1;
-    best_flag = -1;
-    for (;;) {
-	/*
-	 * Skip until we find a word at the start of a line.
-	 */
-	while (!newline && getword(f, word, &newline, filename))
-	    ;
-	if (!newline)
-	    break;		/* got to end of file */
-
-	/*
-	 * Got a client - check if it's a match or a wildcard.
-	 */
-	got_flag = 0;
-	if (client != NULL && strcmp(word, client) != 0 && !ISWILD(word)) {
-	    newline = 0;
-	    continue;
-	}
-	if (!ISWILD(word))
-	    got_flag = NONWILD_CLIENT;
-
-	/*
-	 * Now get a server and check if it matches.
-	 */
-	if (!getword(f, word, &newline, filename))
-	    break;
-	if (newline)
-	    continue;
-	if (!ISWILD(word)) {
-	    if (server != NULL && strcmp(word, server) != 0)
-		continue;
-	    got_flag |= NONWILD_SERVER;
-	}
-
-	/*
-	 * Got some sort of a match - see if it's better than what
-	 * we have already.
-	 */
-	if (got_flag <= best_flag)
-	    continue;
-
-	/*
-	 * Get the secret.
-	 */
-	if (!getword(f, word, &newline, filename))
-	    break;
-	if (newline)
-	    continue;
-
-	if (secret != NULL) {
-	    /*
-	     * Special syntax: @/pathname means read secret from file.
-	     */
-	    if (word[0] == '@' && word[1] == '/') {
-		strlcpy(atfile, word+1, sizeof(atfile));
-		if ((sf = fopen(atfile, "r")) == NULL) {
-		    warn("can't open indirect secret file %s", atfile);
-		    continue;
-		}
-		check_access(sf, atfile);
-		if (!getword(sf, word, &xxx, atfile)) {
-		    warn("no secret in indirect secret file %s", atfile);
-		    fclose(sf);
-		    continue;
-		}
-		fclose(sf);
-	    }
-	    strlcpy(lsecret, word, sizeof(lsecret));
-	}
-
-	/*
-	 * Now read address authorization info and make a wordlist.
-	 */
-	app = &alist;
-	for (;;) {
-	    if (!getword(f, word, &newline, filename) || newline)
-		break;
-	    ap = (struct wordlist *)
-		    malloc(sizeof(struct wordlist) + strlen(word) + 1);
-	    if (ap == NULL)
-		novm("authorized addresses");
-	    ap->word = (char *) (ap + 1);
-	    strcpy(ap->word, word);
-	    *app = ap;
-	    app = &ap->next;
-	}
-	*app = NULL;
-
-	/*
-	 * This is the best so far; remember it.
-	 */
-	best_flag = got_flag;
-	if (addr_list)
-	    free_wordlist(addr_list);
-	addr_list = alist;
-	if (secret != NULL)
-	    strlcpy(secret, lsecret, MAXWORDLEN);
-
-	if (!newline)
-	    break;
-    }
-
-    /* scan for a -- word indicating the start of options */
-    for (app = &addr_list; (ap = *app) != NULL; app = &ap->next)
-	if (strcmp(ap->word, "--") == 0)
-	    break;
-    /* ap = start of options */
-    if (ap != NULL) {
-	ap = ap->next;		/* first option */
-	free(*app);			/* free the "--" word */
-	*app = NULL;		/* terminate addr list */
-    }
-    if (opts != NULL)
-	*opts = ap;
-    else if (ap != NULL)
-	free_wordlist(ap);
-    if (addrs != NULL)
-	*addrs = addr_list;
-    else if (addr_list != NULL)
-	free_wordlist(addr_list);
-
-    return best_flag;
-}
-
-/*
- * wordlist_count - return the number of items in a wordlist
- */
-static int
-wordlist_count(wp)
-    struct wordlist *wp;
-{
-    int n;
-
-    for (n = 0; wp != NULL; wp = wp->next)
-	++n;
-    return n;
-}
-
-/*
- * free_wordlist - release memory allocated for a wordlist.
- */
-static void
-free_wordlist(wp)
-    struct wordlist *wp;
-{
-    struct wordlist *next;
-
-    while (wp != NULL) {
-	next = wp->next;
-	free(wp);
-	wp = next;
-    }
-}
-
-/*
- * auth_script_done - called when the auth-up or auth-down script
- * has finished.
- */
-static void
-auth_script_done(arg)
-    void *arg;
-{
-    auth_script_pid = 0;
-    switch (auth_script_state) {
-    case s_up:
-	if (auth_state == s_down) {
-	    auth_script_state = s_down;
-	    auth_script(_PATH_AUTHDOWN);
-	}
-	break;
-    case s_down:
-	if (auth_state == s_up) {
-	    auth_script_state = s_up;
-	    auth_script(_PATH_AUTHUP);
-	}
-	break;
-    }
-}
-
-/*
- * auth_script - execute a script with arguments
- * interface-name peer-name real-user tty speed
- */
-static void
-auth_script(script)
-    char *script;
-{
-    char strspeed[32];
-    struct passwd *pw;
-    char struid[32];
-    char *user_name;
-    char *argv[8];
-
-    if ((pw = getpwuid(getuid())) != NULL && pw->pw_name != NULL)
-	user_name = pw->pw_name;
-    else {
-	slprintf(struid, sizeof(struid), "%d", getuid());
-	user_name = struid;
-    }
-    slprintf(strspeed, sizeof(strspeed), "%d", baud_rate);
-
-    argv[0] = script;
-    argv[1] = ifname;
-    argv[2] = peer_authname;
-    argv[3] = user_name;
-    argv[4] = devnam;
-    argv[5] = strspeed;
-    argv[6] = NULL;
-
-    auth_script_pid = run_program(script, argv, 0, auth_script_done, NULL);
-}
diff --git a/mdk-stage1/ppp/pppd/cbcp.c b/mdk-stage1/ppp/pppd/cbcp.c
deleted file mode 100644
index 8c57b3cde..000000000
--- a/mdk-stage1/ppp/pppd/cbcp.c
+++ /dev/null
@@ -1,456 +0,0 @@
-/*
- * cbcp - Call Back Configuration Protocol.
- *
- * Copyright (c) 1995 Pedro Roque Marques
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Pedro Roque Marques.  The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "cbcp.h"
-#include "fsm.h"
-#include "lcp.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * Options.
- */
-static int setcbcp __P((char **));
-
-static option_t cbcp_option_list[] = {
-    { "callback", o_special, setcbcp,
-      "Ask for callback", OPT_PRIO | OPT_A2STRVAL, &cbcp[0].us_number },
-    { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void cbcp_init      __P((int unit));
-static void cbcp_open      __P((int unit));
-static void cbcp_lowerup   __P((int unit));
-static void cbcp_input     __P((int unit, u_char *pkt, int len));
-static void cbcp_protrej   __P((int unit));
-static int  cbcp_printpkt  __P((u_char *pkt, int len,
-				void (*printer) __P((void *, char *, ...)),
-				void *arg));
-
-struct protent cbcp_protent = {
-    PPP_CBCP,
-    cbcp_init,
-    cbcp_input,
-    cbcp_protrej,
-    cbcp_lowerup,
-    NULL,
-    cbcp_open,
-    NULL,
-    cbcp_printpkt,
-    NULL,
-    0,
-    "CBCP",
-    NULL,
-    cbcp_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-cbcp_state cbcp[NUM_PPP];	
-
-/* internal prototypes */
-
-static void cbcp_recvreq __P((cbcp_state *us, char *pckt, int len));
-static void cbcp_resp __P((cbcp_state *us));
-static void cbcp_up __P((cbcp_state *us));
-static void cbcp_recvack __P((cbcp_state *us, char *pckt, int len));
-static void cbcp_send __P((cbcp_state *us, u_char code, u_char *buf, int len));
-
-/* option processing */
-static int
-setcbcp(argv)
-    char **argv;
-{
-    lcp_wantoptions[0].neg_cbcp = 1;
-    cbcp_protent.enabled_flag = 1;
-    cbcp[0].us_number = strdup(*argv);
-    if (cbcp[0].us_number == 0)
-	novm("callback number");
-    cbcp[0].us_type |= (1 << CB_CONF_USER);
-    cbcp[0].us_type |= (1 << CB_CONF_ADMIN);
-    return (1);
-}
-
-/* init state */
-static void
-cbcp_init(iface)
-    int iface;
-{
-    cbcp_state *us;
-
-    us = &cbcp[iface];
-    memset(us, 0, sizeof(cbcp_state));
-    us->us_unit = iface;
-    us->us_type |= (1 << CB_CONF_NO);
-}
-
-/* lower layer is up */
-static void
-cbcp_lowerup(iface)
-    int iface;
-{
-    cbcp_state *us = &cbcp[iface];
-
-    dbglog("cbcp_lowerup");
-    dbglog("want: %d", us->us_type);
-
-    if (us->us_type == CB_CONF_USER)
-        dbglog("phone no: %s", us->us_number);
-}
-
-static void
-cbcp_open(unit)
-    int unit;
-{
-    dbglog("cbcp_open");
-}
-
-/* process an incomming packet */
-static void
-cbcp_input(unit, inpacket, pktlen)
-    int unit;
-    u_char *inpacket;
-    int pktlen;
-{
-    u_char *inp;
-    u_char code, id;
-    u_short len;
-
-    cbcp_state *us = &cbcp[unit];
-
-    inp = inpacket;
-
-    if (pktlen < CBCP_MINLEN) {
-        error("CBCP packet is too small");
-	return;
-    }
-
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    GETSHORT(len, inp);
-
-#if 0
-    if (len > pktlen) {
-        error("CBCP packet: invalid length");
-        return;
-    }
-#endif
-
-    len -= CBCP_MINLEN;
- 
-    switch(code) {
-    case CBCP_REQ:
-        us->us_id = id;
-	cbcp_recvreq(us, inp, len);
-	break;
-
-    case CBCP_RESP:
-	dbglog("CBCP_RESP received");
-	break;
-
-    case CBCP_ACK:
-	if (id != us->us_id)
-	    dbglog("id doesn't match: expected %d recv %d",
-		   us->us_id, id);
-
-	cbcp_recvack(us, inp, len);
-	break;
-
-    default:
-	break;
-    }
-}
-
-/* protocol was rejected by foe */
-void cbcp_protrej(int iface)
-{
-}
-
-char *cbcp_codenames[] = {
-    "Request", "Response", "Ack"
-};
-
-char *cbcp_optionnames[] = {
-    "NoCallback",
-    "UserDefined",
-    "AdminDefined",
-    "List"
-};
-
-/* pretty print a packet */
-static int
-cbcp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, opt, id, len, olen, delay;
-    u_char *pstart;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(cbcp_codenames) / sizeof(char *))
-	printer(arg, " %s", cbcp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code); 
-
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-
-    switch (code) {
-    case CBCP_REQ:
-    case CBCP_RESP:
-    case CBCP_ACK:
-        while(len >= 2) {
-	    GETCHAR(opt, p);
-	    GETCHAR(olen, p);
-
-	    if (olen < 2 || olen > len) {
-	        break;
-	    }
-
-	    printer(arg, " <");
-	    len -= olen;
-
-	    if (opt >= 1 && opt <= sizeof(cbcp_optionnames) / sizeof(char *))
-	    	printer(arg, " %s", cbcp_optionnames[opt-1]);
-	    else
-	        printer(arg, " option=0x%x", opt); 
-
-	    if (olen > 2) {
-	        GETCHAR(delay, p);
-		printer(arg, " delay = %d", delay);
-	    }
-
-	    if (olen > 3) {
-	        int addrt;
-		char str[256];
-
-		GETCHAR(addrt, p);
-		memcpy(str, p, olen - 4);
-		str[olen - 4] = 0;
-		printer(arg, " number = %s", str);
-	    }
-	    printer(arg, ">");
-	    break;
-	}
-
-    default:
-	break;
-    }
-
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-
-    return p - pstart;
-}
-
-/* received CBCP request */
-static void
-cbcp_recvreq(us, pckt, pcktlen)
-    cbcp_state *us;
-    char *pckt;
-    int pcktlen;
-{
-    u_char type, opt_len, delay, addr_type;
-    char address[256];
-    int len = pcktlen;
-
-    address[0] = 0;
-
-    while (len) {
-        dbglog("length: %d", len);
-
-	GETCHAR(type, pckt);
-	GETCHAR(opt_len, pckt);
-
-	if (opt_len > 2)
-	    GETCHAR(delay, pckt);
-
-	us->us_allowed |= (1 << type);
-
-	switch(type) {
-	case CB_CONF_NO:
-	    dbglog("no callback allowed");
-	    break;
-
-	case CB_CONF_USER:
-	    dbglog("user callback allowed");
-	    if (opt_len > 4) {
-	        GETCHAR(addr_type, pckt);
-		memcpy(address, pckt, opt_len - 4);
-		address[opt_len - 4] = 0;
-		if (address[0])
-		    dbglog("address: %s", address);
-	    }
-	    break;
-
-	case CB_CONF_ADMIN:
-	    dbglog("user admin defined allowed");
-	    break;
-
-	case CB_CONF_LIST:
-	    break;
-	}
-	len -= opt_len;
-    }
-
-    cbcp_resp(us);
-}
-
-static void
-cbcp_resp(us)
-    cbcp_state *us;
-{
-    u_char cb_type;
-    u_char buf[256];
-    u_char *bufp = buf;
-    int len = 0;
-
-    cb_type = us->us_allowed & us->us_type;
-    dbglog("cbcp_resp cb_type=%d", cb_type);
-
-#if 0
-    if (!cb_type)
-        lcp_down(us->us_unit);
-#endif
-
-    if (cb_type & ( 1 << CB_CONF_USER ) ) {
-	dbglog("cbcp_resp CONF_USER");
-	PUTCHAR(CB_CONF_USER, bufp);
-	len = 3 + 1 + strlen(us->us_number) + 1;
-	PUTCHAR(len , bufp);
-	PUTCHAR(5, bufp); /* delay */
-	PUTCHAR(1, bufp);
-	BCOPY(us->us_number, bufp, strlen(us->us_number) + 1);
-	cbcp_send(us, CBCP_RESP, buf, len);
-	return;
-    }
-
-    if (cb_type & ( 1 << CB_CONF_ADMIN ) ) {
-	dbglog("cbcp_resp CONF_ADMIN");
-        PUTCHAR(CB_CONF_ADMIN, bufp);
-	len = 3;
-	PUTCHAR(len, bufp);
-	PUTCHAR(5, bufp); /* delay */
-	cbcp_send(us, CBCP_RESP, buf, len);
-	return;
-    }
-
-    if (cb_type & ( 1 << CB_CONF_NO ) ) {
-        dbglog("cbcp_resp CONF_NO");
-	PUTCHAR(CB_CONF_NO, bufp);
-	len = 3;
-	PUTCHAR(len , bufp);
-	PUTCHAR(0, bufp);
-	cbcp_send(us, CBCP_RESP, buf, len);
-	start_networks();
-	return;
-    }
-}
-
-static void
-cbcp_send(us, code, buf, len)
-    cbcp_state *us;
-    u_char code;
-    u_char *buf;
-    int len;
-{
-    u_char *outp;
-    int outlen;
-
-    outp = outpacket_buf;
-
-    outlen = 4 + len;
-    
-    MAKEHEADER(outp, PPP_CBCP);
-
-    PUTCHAR(code, outp);
-    PUTCHAR(us->us_id, outp);
-    PUTSHORT(outlen, outp);
-    
-    if (len)
-        BCOPY(buf, outp, len);
-
-    output(us->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-static void
-cbcp_recvack(us, pckt, len)
-    cbcp_state *us;
-    char *pckt;
-    int len;
-{
-    u_char type, delay, addr_type;
-    int opt_len;
-    char address[256];
-
-    if (len) {
-        GETCHAR(type, pckt);
-	GETCHAR(opt_len, pckt);
-     
-	if (opt_len > 2)
-	    GETCHAR(delay, pckt);
-
-	if (opt_len > 4) {
-	    GETCHAR(addr_type, pckt);
-	    memcpy(address, pckt, opt_len - 4);
-	    address[opt_len - 4] = 0;
-	    if (address[0])
-	        dbglog("peer will call: %s", address);
-	}
-	if (type == CB_CONF_NO)
-	    return;
-    }
-
-    cbcp_up(us);
-}
-
-/* ok peer will do callback */
-static void
-cbcp_up(us)
-    cbcp_state *us;
-{
-    persist = 0;
-    lcp_close(0, "Call me back, please");
-    status = EXIT_CALLBACK;
-}
diff --git a/mdk-stage1/ppp/pppd/cbcp.h b/mdk-stage1/ppp/pppd/cbcp.h
deleted file mode 100644
index c2ab3f689..000000000
--- a/mdk-stage1/ppp/pppd/cbcp.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef CBCP_H
-#define CBCP_H
-
-typedef struct cbcp_state {
-    int    us_unit;	/* Interface unit number */
-    u_char us_id;		/* Current id */
-    u_char us_allowed;
-    int    us_type;
-    char   *us_number;    /* Telefone Number */
-} cbcp_state;
-
-extern cbcp_state cbcp[];
-
-extern struct protent cbcp_protent;
-
-#define CBCP_MINLEN 4
-
-#define CBCP_REQ    1
-#define CBCP_RESP   2
-#define CBCP_ACK    3
-
-#define CB_CONF_NO     1
-#define CB_CONF_USER   2
-#define CB_CONF_ADMIN  3
-#define CB_CONF_LIST   4
-#endif
diff --git a/mdk-stage1/ppp/pppd/ccp.c b/mdk-stage1/ppp/pppd/ccp.c
deleted file mode 100644
index 7e36e384e..000000000
--- a/mdk-stage1/ppp/pppd/ccp.c
+++ /dev/null
@@ -1,1257 +0,0 @@
-/*
- * ccp.c - PPP Compression Control Protocol.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ccp.h"
-#include <net/ppp-comp.h>
-
-static const char rcsid[] = RCSID;
-
-/*
- * Unfortunately there is a bug in zlib which means that using a
- * size of 8 (window size = 256) for Deflate compression will cause
- * buffer overruns and kernel crashes in the deflate module.
- * Until this is fixed we only accept sizes in the range 9 .. 15.
- * Thanks to James Carlson for pointing this out.
- */
-#define DEFLATE_MIN_WORKS	9
-
-/*
- * Command-line options.
- */
-static int setbsdcomp __P((char **));
-static int setdeflate __P((char **));
-static char bsd_value[8];
-static char deflate_value[8];
-
-static option_t ccp_option_list[] = {
-    { "noccp", o_bool, &ccp_protent.enabled_flag,
-      "Disable CCP negotiation" },
-    { "-ccp", o_bool, &ccp_protent.enabled_flag,
-      "Disable CCP negotiation", OPT_ALIAS },
-
-    { "bsdcomp", o_special, (void *)setbsdcomp,
-      "Request BSD-Compress packet compression",
-      OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, bsd_value },
-    { "nobsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
-      "don't allow BSD-Compress", OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].bsd_compress },
-    { "-bsdcomp", o_bool, &ccp_wantoptions[0].bsd_compress,
-      "don't allow BSD-Compress", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].bsd_compress },
-
-    { "deflate", o_special, (void *)setdeflate,
-      "request Deflate compression",
-      OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, deflate_value },
-    { "nodeflate", o_bool, &ccp_wantoptions[0].deflate,
-      "don't allow Deflate compression", OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].deflate },
-    { "-deflate", o_bool, &ccp_wantoptions[0].deflate,
-      "don't allow Deflate compression", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].deflate },
-
-    { "nodeflatedraft", o_bool, &ccp_wantoptions[0].deflate_draft,
-      "don't use draft deflate #", OPT_A2COPY,
-      &ccp_allowoptions[0].deflate_draft },
-
-    { "predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
-      "request Predictor-1", 1, &ccp_allowoptions[0].predictor_1, OPT_PRIO },
-    { "nopredictor1", o_bool, &ccp_wantoptions[0].predictor_1,
-      "don't allow Predictor-1", OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].predictor_1 },
-    { "-predictor1", o_bool, &ccp_wantoptions[0].predictor_1,
-      "don't allow Predictor-1", OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR,
-      &ccp_allowoptions[0].predictor_1 },
-
-    { NULL }
-};
-
-/*
- * Protocol entry points from main code.
- */
-static void ccp_init __P((int unit));
-static void ccp_open __P((int unit));
-static void ccp_close __P((int unit, char *));
-static void ccp_lowerup __P((int unit));
-static void ccp_lowerdown __P((int));
-static void ccp_input __P((int unit, u_char *pkt, int len));
-static void ccp_protrej __P((int unit));
-static int  ccp_printpkt __P((u_char *pkt, int len,
-			      void (*printer) __P((void *, char *, ...)),
-			      void *arg));
-static void ccp_datainput __P((int unit, u_char *pkt, int len));
-
-struct protent ccp_protent = {
-    PPP_CCP,
-    ccp_init,
-    ccp_input,
-    ccp_protrej,
-    ccp_lowerup,
-    ccp_lowerdown,
-    ccp_open,
-    ccp_close,
-    ccp_printpkt,
-    ccp_datainput,
-    1,
-    "CCP",
-    "Compressed",
-    ccp_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-fsm ccp_fsm[NUM_PPP];
-ccp_options ccp_wantoptions[NUM_PPP];	/* what to request the peer to use */
-ccp_options ccp_gotoptions[NUM_PPP];	/* what the peer agreed to do */
-ccp_options ccp_allowoptions[NUM_PPP];	/* what we'll agree to do */
-ccp_options ccp_hisoptions[NUM_PPP];	/* what we agreed to do */
-
-/*
- * Callbacks for fsm code.
- */
-static void ccp_resetci __P((fsm *));
-static int  ccp_cilen __P((fsm *));
-static void ccp_addci __P((fsm *, u_char *, int *));
-static int  ccp_ackci __P((fsm *, u_char *, int));
-static int  ccp_nakci __P((fsm *, u_char *, int));
-static int  ccp_rejci __P((fsm *, u_char *, int));
-static int  ccp_reqci __P((fsm *, u_char *, int *, int));
-static void ccp_up __P((fsm *));
-static void ccp_down __P((fsm *));
-static int  ccp_extcode __P((fsm *, int, int, u_char *, int));
-static void ccp_rack_timeout __P((void *));
-static char *method_name __P((ccp_options *, ccp_options *));
-
-static fsm_callbacks ccp_callbacks = {
-    ccp_resetci,
-    ccp_cilen,
-    ccp_addci,
-    ccp_ackci,
-    ccp_nakci,
-    ccp_rejci,
-    ccp_reqci,
-    ccp_up,
-    ccp_down,
-    NULL,
-    NULL,
-    NULL,
-    NULL,
-    ccp_extcode,
-    "CCP"
-};
-
-/*
- * Do we want / did we get any compression?
- */
-#define ANY_COMPRESS(opt)	((opt).deflate || (opt).bsd_compress \
-				 || (opt).predictor_1 || (opt).predictor_2)
-
-/*
- * Local state (mainly for handling reset-reqs and reset-acks).
- */
-static int ccp_localstate[NUM_PPP];
-#define RACK_PENDING	1	/* waiting for reset-ack */
-#define RREQ_REPEAT	2	/* send another reset-req if no reset-ack */
-
-#define RACKTIMEOUT	1	/* second */
-
-static int all_rejected[NUM_PPP];	/* we rejected all peer's options */
-
-/*
- * Option parsing.
- */
-static int
-setbsdcomp(argv)
-    char **argv;
-{
-    int rbits, abits;
-    char *str, *endp;
-
-    str = *argv;
-    abits = rbits = strtol(str, &endp, 0);
-    if (endp != str && *endp == ',') {
-	str = endp + 1;
-	abits = strtol(str, &endp, 0);
-    }
-    if (*endp != 0 || endp == str) {
-	option_error("invalid parameter '%s' for bsdcomp option", *argv);
-	return 0;
-    }
-    if ((rbits != 0 && (rbits < BSD_MIN_BITS || rbits > BSD_MAX_BITS))
-	|| (abits != 0 && (abits < BSD_MIN_BITS || abits > BSD_MAX_BITS))) {
-	option_error("bsdcomp option values must be 0 or %d .. %d",
-		     BSD_MIN_BITS, BSD_MAX_BITS);
-	return 0;
-    }
-    if (rbits > 0) {
-	ccp_wantoptions[0].bsd_compress = 1;
-	ccp_wantoptions[0].bsd_bits = rbits;
-    } else
-	ccp_wantoptions[0].bsd_compress = 0;
-    if (abits > 0) {
-	ccp_allowoptions[0].bsd_compress = 1;
-	ccp_allowoptions[0].bsd_bits = abits;
-    } else
-	ccp_allowoptions[0].bsd_compress = 0;
-    slprintf(bsd_value, sizeof(bsd_value),
-	     rbits == abits? "%d": "%d,%d", rbits, abits);
-
-    return 1;
-}
-
-static int
-setdeflate(argv)
-    char **argv;
-{
-    int rbits, abits;
-    char *str, *endp;
-
-    str = *argv;
-    abits = rbits = strtol(str, &endp, 0);
-    if (endp != str && *endp == ',') {
-	str = endp + 1;
-	abits = strtol(str, &endp, 0);
-    }
-    if (*endp != 0 || endp == str) {
-	option_error("invalid parameter '%s' for deflate option", *argv);
-	return 0;
-    }
-    if ((rbits != 0 && (rbits < DEFLATE_MIN_SIZE || rbits > DEFLATE_MAX_SIZE))
-	|| (abits != 0 && (abits < DEFLATE_MIN_SIZE
-			  || abits > DEFLATE_MAX_SIZE))) {
-	option_error("deflate option values must be 0 or %d .. %d",
-		     DEFLATE_MIN_SIZE, DEFLATE_MAX_SIZE);
-	return 0;
-    }
-    if (rbits == DEFLATE_MIN_SIZE || abits == DEFLATE_MIN_SIZE) {
-	if (rbits == DEFLATE_MIN_SIZE)
-	    rbits = DEFLATE_MIN_WORKS;
-	if (abits == DEFLATE_MIN_SIZE)
-	    abits = DEFLATE_MIN_WORKS;
-	warn("deflate option value of %d changed to %d to avoid zlib bug",
-	     DEFLATE_MIN_SIZE, DEFLATE_MIN_WORKS);
-    }
-    if (rbits > 0) {
-	ccp_wantoptions[0].deflate = 1;
-	ccp_wantoptions[0].deflate_size = rbits;
-    } else
-	ccp_wantoptions[0].deflate = 0;
-    if (abits > 0) {
-	ccp_allowoptions[0].deflate = 1;
-	ccp_allowoptions[0].deflate_size = abits;
-    } else
-	ccp_allowoptions[0].deflate = 0;
-    slprintf(deflate_value, sizeof(deflate_value),
-	     rbits == abits? "%d": "%d,%d", rbits, abits);
-
-    return 1;
-}
-
-/*
- * ccp_init - initialize CCP.
- */
-static void
-ccp_init(unit)
-    int unit;
-{
-    fsm *f = &ccp_fsm[unit];
-
-    f->unit = unit;
-    f->protocol = PPP_CCP;
-    f->callbacks = &ccp_callbacks;
-    fsm_init(f);
-
-    memset(&ccp_wantoptions[unit],  0, sizeof(ccp_options));
-    memset(&ccp_gotoptions[unit],   0, sizeof(ccp_options));
-    memset(&ccp_allowoptions[unit], 0, sizeof(ccp_options));
-    memset(&ccp_hisoptions[unit],   0, sizeof(ccp_options));
-
-    ccp_wantoptions[0].deflate = 1;
-    ccp_wantoptions[0].deflate_size = DEFLATE_MAX_SIZE;
-    ccp_wantoptions[0].deflate_correct = 1;
-    ccp_wantoptions[0].deflate_draft = 1;
-    ccp_allowoptions[0].deflate = 1;
-    ccp_allowoptions[0].deflate_size = DEFLATE_MAX_SIZE;
-    ccp_allowoptions[0].deflate_correct = 1;
-    ccp_allowoptions[0].deflate_draft = 1;
-
-    ccp_wantoptions[0].bsd_compress = 1;
-    ccp_wantoptions[0].bsd_bits = BSD_MAX_BITS;
-    ccp_allowoptions[0].bsd_compress = 1;
-    ccp_allowoptions[0].bsd_bits = BSD_MAX_BITS;
-
-    ccp_allowoptions[0].predictor_1 = 1;
-}
-
-/*
- * ccp_open - CCP is allowed to come up.
- */
-static void
-ccp_open(unit)
-    int unit;
-{
-    fsm *f = &ccp_fsm[unit];
-
-    if (f->state != OPENED)
-	ccp_flags_set(unit, 1, 0);
-
-    /*
-     * Find out which compressors the kernel supports before
-     * deciding whether to open in silent mode.
-     */
-    ccp_resetci(f);
-    if (!ANY_COMPRESS(ccp_gotoptions[unit]))
-	f->flags |= OPT_SILENT;
-
-    fsm_open(f);
-}
-
-/*
- * ccp_close - Terminate CCP.
- */
-static void
-ccp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    ccp_flags_set(unit, 0, 0);
-    fsm_close(&ccp_fsm[unit], reason);
-}
-
-/*
- * ccp_lowerup - we may now transmit CCP packets.
- */
-static void
-ccp_lowerup(unit)
-    int unit;
-{
-    fsm_lowerup(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_lowerdown - we may not transmit CCP packets.
- */
-static void
-ccp_lowerdown(unit)
-    int unit;
-{
-    fsm_lowerdown(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_input - process a received CCP packet.
- */
-static void
-ccp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm *f = &ccp_fsm[unit];
-    int oldstate;
-
-    /*
-     * Check for a terminate-request so we can print a message.
-     */
-    oldstate = f->state;
-    fsm_input(f, p, len);
-    if (oldstate == OPENED && p[0] == TERMREQ && f->state != OPENED)
-	notice("Compression disabled by peer.");
-
-    /*
-     * If we get a terminate-ack and we're not asking for compression,
-     * close CCP.
-     */
-    if (oldstate == REQSENT && p[0] == TERMACK
-	&& !ANY_COMPRESS(ccp_gotoptions[unit]))
-	ccp_close(unit, "No compression negotiated");
-}
-
-/*
- * Handle a CCP-specific code.
- */
-static int
-ccp_extcode(f, code, id, p, len)
-    fsm *f;
-    int code, id;
-    u_char *p;
-    int len;
-{
-    switch (code) {
-    case CCP_RESETREQ:
-	if (f->state != OPENED)
-	    break;
-	/* send a reset-ack, which the transmitter will see and
-	   reset its compression state. */
-	fsm_sdata(f, CCP_RESETACK, id, NULL, 0);
-	break;
-
-    case CCP_RESETACK:
-	if (ccp_localstate[f->unit] & RACK_PENDING && id == f->reqid) {
-	    ccp_localstate[f->unit] &= ~(RACK_PENDING | RREQ_REPEAT);
-	    UNTIMEOUT(ccp_rack_timeout, f);
-	}
-	break;
-
-    default:
-	return 0;
-    }
-
-    return 1;
-}
-
-/*
- * ccp_protrej - peer doesn't talk CCP.
- */
-static void
-ccp_protrej(unit)
-    int unit;
-{
-    ccp_flags_set(unit, 0, 0);
-    fsm_lowerdown(&ccp_fsm[unit]);
-}
-
-/*
- * ccp_resetci - initialize at start of negotiation.
- */
-static void
-ccp_resetci(f)
-    fsm *f;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    u_char opt_buf[16];
-
-    *go = ccp_wantoptions[f->unit];
-    all_rejected[f->unit] = 0;
-
-    /*
-     * Check whether the kernel knows about the various
-     * compression methods we might request.
-     */
-    if (go->bsd_compress) {
-	opt_buf[0] = CI_BSD_COMPRESS;
-	opt_buf[1] = CILEN_BSD_COMPRESS;
-	opt_buf[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, BSD_MIN_BITS);
-	if (ccp_test(f->unit, opt_buf, CILEN_BSD_COMPRESS, 0) <= 0)
-	    go->bsd_compress = 0;
-    }
-    if (go->deflate) {
-	if (go->deflate_correct) {
-	    opt_buf[0] = CI_DEFLATE;
-	    opt_buf[1] = CILEN_DEFLATE;
-	    opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
-	    opt_buf[3] = DEFLATE_CHK_SEQUENCE;
-	    if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
-		go->deflate_correct = 0;
-	}
-	if (go->deflate_draft) {
-	    opt_buf[0] = CI_DEFLATE_DRAFT;
-	    opt_buf[1] = CILEN_DEFLATE;
-	    opt_buf[2] = DEFLATE_MAKE_OPT(DEFLATE_MIN_WORKS);
-	    opt_buf[3] = DEFLATE_CHK_SEQUENCE;
-	    if (ccp_test(f->unit, opt_buf, CILEN_DEFLATE, 0) <= 0)
-		go->deflate_draft = 0;
-	}
-	if (!go->deflate_correct && !go->deflate_draft)
-	    go->deflate = 0;
-    }
-    if (go->predictor_1) {
-	opt_buf[0] = CI_PREDICTOR_1;
-	opt_buf[1] = CILEN_PREDICTOR_1;
-	if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_1, 0) <= 0)
-	    go->predictor_1 = 0;
-    }
-    if (go->predictor_2) {
-	opt_buf[0] = CI_PREDICTOR_2;
-	opt_buf[1] = CILEN_PREDICTOR_2;
-	if (ccp_test(f->unit, opt_buf, CILEN_PREDICTOR_2, 0) <= 0)
-	    go->predictor_2 = 0;
-    }
-}
-
-/*
- * ccp_cilen - Return total length of our configuration info.
- */
-static int
-ccp_cilen(f)
-    fsm *f;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-
-    return (go->bsd_compress? CILEN_BSD_COMPRESS: 0)
-	+ (go->deflate? CILEN_DEFLATE: 0)
-	+ (go->predictor_1? CILEN_PREDICTOR_1: 0)
-	+ (go->predictor_2? CILEN_PREDICTOR_2: 0);
-}
-
-/*
- * ccp_addci - put our requests in a packet.
- */
-static void
-ccp_addci(f, p, lenp)
-    fsm *f;
-    u_char *p;
-    int *lenp;
-{
-    int res;
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    u_char *p0 = p;
-
-    /*
-     * Add the compression types that we can receive, in decreasing
-     * preference order.  Get the kernel to allocate the first one
-     * in case it gets Acked.
-     */
-    if (go->deflate) {
-	p[0] = go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT;
-	p[1] = CILEN_DEFLATE;
-	p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
-	p[3] = DEFLATE_CHK_SEQUENCE;
-	for (;;) {
-	    res = ccp_test(f->unit, p, CILEN_DEFLATE, 0);
-	    if (res > 0) {
-		p += CILEN_DEFLATE;
-		break;
-	    }
-	    if (res < 0 || go->deflate_size <= DEFLATE_MIN_WORKS) {
-		go->deflate = 0;
-		break;
-	    }
-	    --go->deflate_size;
-	    p[2] = DEFLATE_MAKE_OPT(go->deflate_size);
-	}
-	if (p != p0 && go->deflate_correct && go->deflate_draft) {
-	    p[0] = CI_DEFLATE_DRAFT;
-	    p[1] = CILEN_DEFLATE;
-	    p[2] = p[2 - CILEN_DEFLATE];
-	    p[3] = DEFLATE_CHK_SEQUENCE;
-	    p += CILEN_DEFLATE;
-	}
-    }
-    if (go->bsd_compress) {
-	p[0] = CI_BSD_COMPRESS;
-	p[1] = CILEN_BSD_COMPRESS;
-	p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
-	if (p != p0) {
-	    p += CILEN_BSD_COMPRESS;	/* not the first option */
-	} else {
-	    for (;;) {
-		res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 0);
-		if (res > 0) {
-		    p += CILEN_BSD_COMPRESS;
-		    break;
-		}
-		if (res < 0 || go->bsd_bits <= BSD_MIN_BITS) {
-		    go->bsd_compress = 0;
-		    break;
-		}
-		--go->bsd_bits;
-		p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits);
-	    }
-	}
-    }
-    /* XXX Should Predictor 2 be preferable to Predictor 1? */
-    if (go->predictor_1) {
-	p[0] = CI_PREDICTOR_1;
-	p[1] = CILEN_PREDICTOR_1;
-	if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 0) <= 0) {
-	    go->predictor_1 = 0;
-	} else {
-	    p += CILEN_PREDICTOR_1;
-	}
-    }
-    if (go->predictor_2) {
-	p[0] = CI_PREDICTOR_2;
-	p[1] = CILEN_PREDICTOR_2;
-	if (p == p0 && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 0) <= 0) {
-	    go->predictor_2 = 0;
-	} else {
-	    p += CILEN_PREDICTOR_2;
-	}
-    }
-
-    go->method = (p > p0)? p0[0]: -1;
-
-    *lenp = p - p0;
-}
-
-/*
- * ccp_ackci - process a received configure-ack, and return
- * 1 iff the packet was OK.
- */
-static int
-ccp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    u_char *p0 = p;
-
-    if (go->deflate) {
-	if (len < CILEN_DEFLATE
-	    || p[0] != (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
-	    || p[1] != CILEN_DEFLATE
-	    || p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-	    || p[3] != DEFLATE_CHK_SEQUENCE)
-	    return 0;
-	p += CILEN_DEFLATE;
-	len -= CILEN_DEFLATE;
-	/* XXX Cope with first/fast ack */
-	if (len == 0)
-	    return 1;
-	if (go->deflate_correct && go->deflate_draft) {
-	    if (len < CILEN_DEFLATE
-		|| p[0] != CI_DEFLATE_DRAFT
-		|| p[1] != CILEN_DEFLATE
-		|| p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-		|| p[3] != DEFLATE_CHK_SEQUENCE)
-		return 0;
-	    p += CILEN_DEFLATE;
-	    len -= CILEN_DEFLATE;
-	}
-    }
-    if (go->bsd_compress) {
-	if (len < CILEN_BSD_COMPRESS
-	    || p[0] != CI_BSD_COMPRESS || p[1] != CILEN_BSD_COMPRESS
-	    || p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
-	    return 0;
-	p += CILEN_BSD_COMPRESS;
-	len -= CILEN_BSD_COMPRESS;
-	/* XXX Cope with first/fast ack */
-	if (p == p0 && len == 0)
-	    return 1;
-    }
-    if (go->predictor_1) {
-	if (len < CILEN_PREDICTOR_1
-	    || p[0] != CI_PREDICTOR_1 || p[1] != CILEN_PREDICTOR_1)
-	    return 0;
-	p += CILEN_PREDICTOR_1;
-	len -= CILEN_PREDICTOR_1;
-	/* XXX Cope with first/fast ack */
-	if (p == p0 && len == 0)
-	    return 1;
-    }
-    if (go->predictor_2) {
-	if (len < CILEN_PREDICTOR_2
-	    || p[0] != CI_PREDICTOR_2 || p[1] != CILEN_PREDICTOR_2)
-	    return 0;
-	p += CILEN_PREDICTOR_2;
-	len -= CILEN_PREDICTOR_2;
-	/* XXX Cope with first/fast ack */
-	if (p == p0 && len == 0)
-	    return 1;
-    }
-
-    if (len != 0)
-	return 0;
-    return 1;
-}
-
-/*
- * ccp_nakci - process received configure-nak.
- * Returns 1 iff the nak was OK.
- */
-static int
-ccp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    ccp_options no;		/* options we've seen already */
-    ccp_options try;		/* options to ask for next time */
-
-    memset(&no, 0, sizeof(no));
-    try = *go;
-
-    if (go->deflate && len >= CILEN_DEFLATE
-	&& p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
-	&& p[1] == CILEN_DEFLATE) {
-	no.deflate = 1;
-	/*
-	 * Peer wants us to use a different code size or something.
-	 * Stop asking for Deflate if we don't understand his suggestion.
-	 */
-	if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
-	    || DEFLATE_SIZE(p[2]) < DEFLATE_MIN_WORKS
-	    || p[3] != DEFLATE_CHK_SEQUENCE)
-	    try.deflate = 0;
-	else if (DEFLATE_SIZE(p[2]) < go->deflate_size)
-	    try.deflate_size = DEFLATE_SIZE(p[2]);
-	p += CILEN_DEFLATE;
-	len -= CILEN_DEFLATE;
-	if (go->deflate_correct && go->deflate_draft
-	    && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
-	    && p[1] == CILEN_DEFLATE) {
-	    p += CILEN_DEFLATE;
-	    len -= CILEN_DEFLATE;
-	}
-    }
-
-    if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
-	&& p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
-	no.bsd_compress = 1;
-	/*
-	 * Peer wants us to use a different number of bits
-	 * or a different version.
-	 */
-	if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION)
-	    try.bsd_compress = 0;
-	else if (BSD_NBITS(p[2]) < go->bsd_bits)
-	    try.bsd_bits = BSD_NBITS(p[2]);
-	p += CILEN_BSD_COMPRESS;
-	len -= CILEN_BSD_COMPRESS;
-    }
-
-    /*
-     * Predictor-1 and 2 have no options, so they can't be Naked.
-     *
-     * There may be remaining options but we ignore them.
-     */
-
-    if (f->state != OPENED)
-	*go = try;
-    return 1;
-}
-
-/*
- * ccp_rejci - reject some of our suggested compression methods.
- */
-static int
-ccp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    ccp_options try;		/* options to request next time */
-
-    try = *go;
-
-    /*
-     * Cope with empty configure-rejects by ceasing to send
-     * configure-requests.
-     */
-    if (len == 0 && all_rejected[f->unit])
-	return -1;
-
-    if (go->deflate && len >= CILEN_DEFLATE
-	&& p[0] == (go->deflate_correct? CI_DEFLATE: CI_DEFLATE_DRAFT)
-	&& p[1] == CILEN_DEFLATE) {
-	if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-	    || p[3] != DEFLATE_CHK_SEQUENCE)
-	    return 0;		/* Rej is bad */
-	if (go->deflate_correct)
-	    try.deflate_correct = 0;
-	else
-	    try.deflate_draft = 0;
-	p += CILEN_DEFLATE;
-	len -= CILEN_DEFLATE;
-	if (go->deflate_correct && go->deflate_draft
-	    && len >= CILEN_DEFLATE && p[0] == CI_DEFLATE_DRAFT
-	    && p[1] == CILEN_DEFLATE) {
-	    if (p[2] != DEFLATE_MAKE_OPT(go->deflate_size)
-		|| p[3] != DEFLATE_CHK_SEQUENCE)
-		return 0;		/* Rej is bad */
-	    try.deflate_draft = 0;
-	    p += CILEN_DEFLATE;
-	    len -= CILEN_DEFLATE;
-	}
-	if (!try.deflate_correct && !try.deflate_draft)
-	    try.deflate = 0;
-    }
-    if (go->bsd_compress && len >= CILEN_BSD_COMPRESS
-	&& p[0] == CI_BSD_COMPRESS && p[1] == CILEN_BSD_COMPRESS) {
-	if (p[2] != BSD_MAKE_OPT(BSD_CURRENT_VERSION, go->bsd_bits))
-	    return 0;
-	try.bsd_compress = 0;
-	p += CILEN_BSD_COMPRESS;
-	len -= CILEN_BSD_COMPRESS;
-    }
-    if (go->predictor_1 && len >= CILEN_PREDICTOR_1
-	&& p[0] == CI_PREDICTOR_1 && p[1] == CILEN_PREDICTOR_1) {
-	try.predictor_1 = 0;
-	p += CILEN_PREDICTOR_1;
-	len -= CILEN_PREDICTOR_1;
-    }
-    if (go->predictor_2 && len >= CILEN_PREDICTOR_2
-	&& p[0] == CI_PREDICTOR_2 && p[1] == CILEN_PREDICTOR_2) {
-	try.predictor_2 = 0;
-	p += CILEN_PREDICTOR_2;
-	len -= CILEN_PREDICTOR_2;
-    }
-
-    if (len != 0)
-	return 0;
-
-    if (f->state != OPENED)
-	*go = try;
-
-    return 1;
-}
-
-/*
- * ccp_reqci - processed a received configure-request.
- * Returns CONFACK, CONFNAK or CONFREJ and the packet modified
- * appropriately.
- */
-static int
-ccp_reqci(f, p, lenp, dont_nak)
-    fsm *f;
-    u_char *p;
-    int *lenp;
-    int dont_nak;
-{
-    int ret, newret, res;
-    u_char *p0, *retp;
-    int len, clen, type, nb;
-    ccp_options *ho = &ccp_hisoptions[f->unit];
-    ccp_options *ao = &ccp_allowoptions[f->unit];
-
-    ret = CONFACK;
-    retp = p0 = p;
-    len = *lenp;
-
-    memset(ho, 0, sizeof(ccp_options));
-    ho->method = (len > 0)? p[0]: -1;
-
-    while (len > 0) {
-	newret = CONFACK;
-	if (len < 2 || p[1] < 2 || p[1] > len) {
-	    /* length is bad */
-	    clen = len;
-	    newret = CONFREJ;
-
-	} else {
-	    type = p[0];
-	    clen = p[1];
-
-	    switch (type) {
-	    case CI_DEFLATE:
-	    case CI_DEFLATE_DRAFT:
-		if (!ao->deflate || clen != CILEN_DEFLATE
-		    || (!ao->deflate_correct && type == CI_DEFLATE)
-		    || (!ao->deflate_draft && type == CI_DEFLATE_DRAFT)) {
-		    newret = CONFREJ;
-		    break;
-		}
-
-		ho->deflate = 1;
-		ho->deflate_size = nb = DEFLATE_SIZE(p[2]);
-		if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL
-		    || p[3] != DEFLATE_CHK_SEQUENCE
-		    || nb > ao->deflate_size || nb < DEFLATE_MIN_WORKS) {
-		    newret = CONFNAK;
-		    if (!dont_nak) {
-			p[2] = DEFLATE_MAKE_OPT(ao->deflate_size);
-			p[3] = DEFLATE_CHK_SEQUENCE;
-			/* fall through to test this #bits below */
-		    } else
-			break;
-		}
-
-		/*
-		 * Check whether we can do Deflate with the window
-		 * size they want.  If the window is too big, reduce
-		 * it until the kernel can cope and nak with that.
-		 * We only check this for the first option.
-		 */
-		if (p == p0) {
-		    for (;;) {
-			res = ccp_test(f->unit, p, CILEN_DEFLATE, 1);
-			if (res > 0)
-			    break;		/* it's OK now */
-			if (res < 0 || nb == DEFLATE_MIN_WORKS || dont_nak) {
-			    newret = CONFREJ;
-			    p[2] = DEFLATE_MAKE_OPT(ho->deflate_size);
-			    break;
-			}
-			newret = CONFNAK;
-			--nb;
-			p[2] = DEFLATE_MAKE_OPT(nb);
-		    }
-		}
-		break;
-
-	    case CI_BSD_COMPRESS:
-		if (!ao->bsd_compress || clen != CILEN_BSD_COMPRESS) {
-		    newret = CONFREJ;
-		    break;
-		}
-
-		ho->bsd_compress = 1;
-		ho->bsd_bits = nb = BSD_NBITS(p[2]);
-		if (BSD_VERSION(p[2]) != BSD_CURRENT_VERSION
-		    || nb > ao->bsd_bits || nb < BSD_MIN_BITS) {
-		    newret = CONFNAK;
-		    if (!dont_nak) {
-			p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, ao->bsd_bits);
-			/* fall through to test this #bits below */
-		    } else
-			break;
-		}
-
-		/*
-		 * Check whether we can do BSD-Compress with the code
-		 * size they want.  If the code size is too big, reduce
-		 * it until the kernel can cope and nak with that.
-		 * We only check this for the first option.
-		 */
-		if (p == p0) {
-		    for (;;) {
-			res = ccp_test(f->unit, p, CILEN_BSD_COMPRESS, 1);
-			if (res > 0)
-			    break;
-			if (res < 0 || nb == BSD_MIN_BITS || dont_nak) {
-			    newret = CONFREJ;
-			    p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION,
-						ho->bsd_bits);
-			    break;
-			}
-			newret = CONFNAK;
-			--nb;
-			p[2] = BSD_MAKE_OPT(BSD_CURRENT_VERSION, nb);
-		    }
-		}
-		break;
-
-	    case CI_PREDICTOR_1:
-		if (!ao->predictor_1 || clen != CILEN_PREDICTOR_1) {
-		    newret = CONFREJ;
-		    break;
-		}
-
-		ho->predictor_1 = 1;
-		if (p == p0
-		    && ccp_test(f->unit, p, CILEN_PREDICTOR_1, 1) <= 0) {
-		    newret = CONFREJ;
-		}
-		break;
-
-	    case CI_PREDICTOR_2:
-		if (!ao->predictor_2 || clen != CILEN_PREDICTOR_2) {
-		    newret = CONFREJ;
-		    break;
-		}
-
-		ho->predictor_2 = 1;
-		if (p == p0
-		    && ccp_test(f->unit, p, CILEN_PREDICTOR_2, 1) <= 0) {
-		    newret = CONFREJ;
-		}
-		break;
-
-	    default:
-		newret = CONFREJ;
-	    }
-	}
-
-	if (newret == CONFNAK && dont_nak)
-	    newret = CONFREJ;
-	if (!(newret == CONFACK || (newret == CONFNAK && ret == CONFREJ))) {
-	    /* we're returning this option */
-	    if (newret == CONFREJ && ret == CONFNAK)
-		retp = p0;
-	    ret = newret;
-	    if (p != retp)
-		BCOPY(p, retp, clen);
-	    retp += clen;
-	}
-
-	p += clen;
-	len -= clen;
-    }
-
-    if (ret != CONFACK) {
-	if (ret == CONFREJ && *lenp == retp - p0)
-	    all_rejected[f->unit] = 1;
-	else
-	    *lenp = retp - p0;
-    }
-    return ret;
-}
-
-/*
- * Make a string name for a compression method (or 2).
- */
-static char *
-method_name(opt, opt2)
-    ccp_options *opt, *opt2;
-{
-    static char result[64];
-
-    if (!ANY_COMPRESS(*opt))
-	return "(none)";
-    switch (opt->method) {
-    case CI_DEFLATE:
-    case CI_DEFLATE_DRAFT:
-	if (opt2 != NULL && opt2->deflate_size != opt->deflate_size)
-	    slprintf(result, sizeof(result), "Deflate%s (%d/%d)",
-		     (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
-		     opt->deflate_size, opt2->deflate_size);
-	else
-	    slprintf(result, sizeof(result), "Deflate%s (%d)",
-		     (opt->method == CI_DEFLATE_DRAFT? "(old#)": ""),
-		     opt->deflate_size);
-	break;
-    case CI_BSD_COMPRESS:
-	if (opt2 != NULL && opt2->bsd_bits != opt->bsd_bits)
-	    slprintf(result, sizeof(result), "BSD-Compress (%d/%d)",
-		     opt->bsd_bits, opt2->bsd_bits);
-	else
-	    slprintf(result, sizeof(result), "BSD-Compress (%d)",
-		     opt->bsd_bits);
-	break;
-    case CI_PREDICTOR_1:
-	return "Predictor 1";
-    case CI_PREDICTOR_2:
-	return "Predictor 2";
-    default:
-	slprintf(result, sizeof(result), "Method %d", opt->method);
-    }
-    return result;
-}
-
-/*
- * CCP has come up - inform the kernel driver and log a message.
- */
-static void
-ccp_up(f)
-    fsm *f;
-{
-    ccp_options *go = &ccp_gotoptions[f->unit];
-    ccp_options *ho = &ccp_hisoptions[f->unit];
-    char method1[64];
-
-    ccp_flags_set(f->unit, 1, 1);
-    if (ANY_COMPRESS(*go)) {
-	if (ANY_COMPRESS(*ho)) {
-	    if (go->method == ho->method) {
-		notice("%s compression enabled", method_name(go, ho));
-	    } else {
-		strlcpy(method1, method_name(go, NULL), sizeof(method1));
-		notice("%s / %s compression enabled",
-		       method1, method_name(ho, NULL));
-	    }
-	} else
-	    notice("%s receive compression enabled", method_name(go, NULL));
-    } else if (ANY_COMPRESS(*ho))
-	notice("%s transmit compression enabled", method_name(ho, NULL));
-}
-
-/*
- * CCP has gone down - inform the kernel driver.
- */
-static void
-ccp_down(f)
-    fsm *f;
-{
-    if (ccp_localstate[f->unit] & RACK_PENDING)
-	UNTIMEOUT(ccp_rack_timeout, f);
-    ccp_localstate[f->unit] = 0;
-    ccp_flags_set(f->unit, 1, 0);
-}
-
-/*
- * Print the contents of a CCP packet.
- */
-static char *ccp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej",
-    NULL, NULL, NULL, NULL, NULL, NULL,
-    "ResetReq", "ResetAck",
-};
-
-static int
-ccp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    u_char *p0, *optend;
-    int code, id, len;
-    int optlen;
-
-    p0 = p;
-    if (plen < HEADERLEN)
-	return 0;
-    code = p[0];
-    id = p[1];
-    len = (p[2] << 8) + p[3];
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ccp_codenames) / sizeof(char *)
-	&& ccp_codenames[code-1] != NULL)
-	printer(arg, " %s", ccp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    p += HEADERLEN;
-
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print list of possible compression methods */
-	while (len >= 2) {
-	    code = p[0];
-	    optlen = p[1];
-	    if (optlen < 2 || optlen > len)
-		break;
-	    printer(arg, " <");
-	    len -= optlen;
-	    optend = p + optlen;
-	    switch (code) {
-	    case CI_DEFLATE:
-	    case CI_DEFLATE_DRAFT:
-		if (optlen >= CILEN_DEFLATE) {
-		    printer(arg, "deflate%s %d",
-			    (code == CI_DEFLATE_DRAFT? "(old#)": ""),
-			    DEFLATE_SIZE(p[2]));
-		    if (DEFLATE_METHOD(p[2]) != DEFLATE_METHOD_VAL)
-			printer(arg, " method %d", DEFLATE_METHOD(p[2]));
-		    if (p[3] != DEFLATE_CHK_SEQUENCE)
-			printer(arg, " check %d", p[3]);
-		    p += CILEN_DEFLATE;
-		}
-		break;
-	    case CI_BSD_COMPRESS:
-		if (optlen >= CILEN_BSD_COMPRESS) {
-		    printer(arg, "bsd v%d %d", BSD_VERSION(p[2]),
-			    BSD_NBITS(p[2]));
-		    p += CILEN_BSD_COMPRESS;
-		}
-		break;
-	    case CI_PREDICTOR_1:
-		if (optlen >= CILEN_PREDICTOR_1) {
-		    printer(arg, "predictor 1");
-		    p += CILEN_PREDICTOR_1;
-		}
-		break;
-	    case CI_PREDICTOR_2:
-		if (optlen >= CILEN_PREDICTOR_2) {
-		    printer(arg, "predictor 2");
-		    p += CILEN_PREDICTOR_2;
-		}
-		break;
-	    }
-	    while (p < optend)
-		printer(arg, " %.2x", *p++);
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    print_string((char *)p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-    }
-
-    /* dump out the rest of the packet in hex */
-    while (--len >= 0)
-	printer(arg, " %.2x", *p++);
-
-    return p - p0;
-}
-
-/*
- * We have received a packet that the decompressor failed to
- * decompress.  Here we would expect to issue a reset-request, but
- * Motorola has a patent on resetting the compressor as a result of
- * detecting an error in the decompressed data after decompression.
- * (See US patent 5,130,993; international patent publication number
- * WO 91/10289; Australian patent 73296/91.)
- *
- * So we ask the kernel whether the error was detected after
- * decompression; if it was, we take CCP down, thus disabling
- * compression :-(, otherwise we issue the reset-request.
- */
-static void
-ccp_datainput(unit, pkt, len)
-    int unit;
-    u_char *pkt;
-    int len;
-{
-    fsm *f;
-
-    f = &ccp_fsm[unit];
-    if (f->state == OPENED) {
-	if (ccp_fatal_error(unit)) {
-	    /*
-	     * Disable compression by taking CCP down.
-	     */
-	    error("Lost compression sync: disabling compression");
-	    ccp_close(unit, "Lost compression sync");
-	} else {
-	    /*
-	     * Send a reset-request to reset the peer's compressor.
-	     * We don't do that if we are still waiting for an
-	     * acknowledgement to a previous reset-request.
-	     */
-	    if (!(ccp_localstate[f->unit] & RACK_PENDING)) {
-		fsm_sdata(f, CCP_RESETREQ, f->reqid = ++f->id, NULL, 0);
-		TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
-		ccp_localstate[f->unit] |= RACK_PENDING;
-	    } else
-		ccp_localstate[f->unit] |= RREQ_REPEAT;
-	}
-    }
-}
-
-/*
- * Timeout waiting for reset-ack.
- */
-static void
-ccp_rack_timeout(arg)
-    void *arg;
-{
-    fsm *f = arg;
-
-    if (f->state == OPENED && ccp_localstate[f->unit] & RREQ_REPEAT) {
-	fsm_sdata(f, CCP_RESETREQ, f->reqid, NULL, 0);
-	TIMEOUT(ccp_rack_timeout, f, RACKTIMEOUT);
-	ccp_localstate[f->unit] &= ~RREQ_REPEAT;
-    } else
-	ccp_localstate[f->unit] &= ~RACK_PENDING;
-}
-
diff --git a/mdk-stage1/ppp/pppd/ccp.h b/mdk-stage1/ppp/pppd/ccp.h
deleted file mode 100644
index 609d858c5..000000000
--- a/mdk-stage1/ppp/pppd/ccp.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * ccp.h - Definitions for PPP Compression Control Protocol.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-typedef struct ccp_options {
-    bool bsd_compress;		/* do BSD Compress? */
-    bool deflate;		/* do Deflate? */
-    bool predictor_1;		/* do Predictor-1? */
-    bool predictor_2;		/* do Predictor-2? */
-    bool deflate_correct;	/* use correct code for deflate? */
-    bool deflate_draft;		/* use draft RFC code for deflate? */
-    u_short bsd_bits;		/* # bits/code for BSD Compress */
-    u_short deflate_size;	/* lg(window size) for Deflate */
-    short method;		/* code for chosen compression method */
-} ccp_options;
-
-extern fsm ccp_fsm[];
-extern ccp_options ccp_wantoptions[];
-extern ccp_options ccp_gotoptions[];
-extern ccp_options ccp_allowoptions[];
-extern ccp_options ccp_hisoptions[];
-
-extern struct protent ccp_protent;
diff --git a/mdk-stage1/ppp/pppd/chap.c b/mdk-stage1/ppp/pppd/chap.c
deleted file mode 100644
index 54c0e0095..000000000
--- a/mdk-stage1/ppp/pppd/chap.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * chap.c - Challenge Handshake Authentication Protocol.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1991 Gregory M. Christy.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Gregory M. Christy.  The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "chap.h"
-#include "md5.h"
-#ifdef CHAPMS
-#include "chap_ms.h"
-#endif
-
-static const char rcsid[] = RCSID;
-
-/*
- * Command-line options.
- */
-static option_t chap_option_list[] = {
-    { "chap-restart", o_int, &chap[0].timeouttime,
-      "Set timeout for CHAP", OPT_PRIO },
-    { "chap-max-challenge", o_int, &chap[0].max_transmits,
-      "Set max #xmits for challenge", OPT_PRIO },
-    { "chap-interval", o_int, &chap[0].chal_interval,
-      "Set interval for rechallenge", OPT_PRIO },
-#ifdef MSLANMAN
-    { "ms-lanman", o_bool, &ms_lanman,
-      "Use LanMan passwd when using MS-CHAP", 1 },
-#endif
-    { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void ChapInit __P((int));
-static void ChapLowerUp __P((int));
-static void ChapLowerDown __P((int));
-static void ChapInput __P((int, u_char *, int));
-static void ChapProtocolReject __P((int));
-static int  ChapPrintPkt __P((u_char *, int,
-			      void (*) __P((void *, char *, ...)), void *));
-
-struct protent chap_protent = {
-    PPP_CHAP,
-    ChapInit,
-    ChapInput,
-    ChapProtocolReject,
-    ChapLowerUp,
-    ChapLowerDown,
-    NULL,
-    NULL,
-    ChapPrintPkt,
-    NULL,
-    1,
-    "CHAP",
-    NULL,
-    chap_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-chap_state chap[NUM_PPP];		/* CHAP state; one for each unit */
-
-static void ChapChallengeTimeout __P((void *));
-static void ChapResponseTimeout __P((void *));
-static void ChapReceiveChallenge __P((chap_state *, u_char *, int, int));
-static void ChapRechallenge __P((void *));
-static void ChapReceiveResponse __P((chap_state *, u_char *, int, int));
-static void ChapReceiveSuccess __P((chap_state *, u_char *, int, int));
-static void ChapReceiveFailure __P((chap_state *, u_char *, int, int));
-static void ChapSendStatus __P((chap_state *, int));
-static void ChapSendChallenge __P((chap_state *));
-static void ChapSendResponse __P((chap_state *));
-static void ChapGenChallenge __P((chap_state *));
-
-extern double drand48 __P((void));
-extern void srand48 __P((long));
-
-/*
- * ChapInit - Initialize a CHAP unit.
- */
-static void
-ChapInit(unit)
-    int unit;
-{
-    chap_state *cstate = &chap[unit];
-
-    BZERO(cstate, sizeof(*cstate));
-    cstate->unit = unit;
-    cstate->clientstate = CHAPCS_INITIAL;
-    cstate->serverstate = CHAPSS_INITIAL;
-    cstate->timeouttime = CHAP_DEFTIMEOUT;
-    cstate->max_transmits = CHAP_DEFTRANSMITS;
-    /* random number generator is initialized in magic_init */
-}
-
-
-/*
- * ChapAuthWithPeer - Authenticate us with our peer (start client).
- *
- */
-void
-ChapAuthWithPeer(unit, our_name, digest)
-    int unit;
-    char *our_name;
-    int digest;
-{
-    chap_state *cstate = &chap[unit];
-
-    cstate->resp_name = our_name;
-    cstate->resp_type = digest;
-
-    if (cstate->clientstate == CHAPCS_INITIAL ||
-	cstate->clientstate == CHAPCS_PENDING) {
-	/* lower layer isn't up - wait until later */
-	cstate->clientstate = CHAPCS_PENDING;
-	return;
-    }
-
-    /*
-     * We get here as a result of LCP coming up.
-     * So even if CHAP was open before, we will 
-     * have to re-authenticate ourselves.
-     */
-    cstate->clientstate = CHAPCS_LISTEN;
-}
-
-
-/*
- * ChapAuthPeer - Authenticate our peer (start server).
- */
-void
-ChapAuthPeer(unit, our_name, digest)
-    int unit;
-    char *our_name;
-    int digest;
-{
-    chap_state *cstate = &chap[unit];
-  
-    cstate->chal_name = our_name;
-    cstate->chal_type = digest;
-
-    if (cstate->serverstate == CHAPSS_INITIAL ||
-	cstate->serverstate == CHAPSS_PENDING) {
-	/* lower layer isn't up - wait until later */
-	cstate->serverstate = CHAPSS_PENDING;
-	return;
-    }
-
-    ChapGenChallenge(cstate);
-    ChapSendChallenge(cstate);		/* crank it up dude! */
-    cstate->serverstate = CHAPSS_INITIAL_CHAL;
-}
-
-
-/*
- * ChapChallengeTimeout - Timeout expired on sending challenge.
- */
-static void
-ChapChallengeTimeout(arg)
-    void *arg;
-{
-    chap_state *cstate = (chap_state *) arg;
-  
-    /* if we aren't sending challenges, don't worry.  then again we */
-    /* probably shouldn't be here either */
-    if (cstate->serverstate != CHAPSS_INITIAL_CHAL &&
-	cstate->serverstate != CHAPSS_RECHALLENGE)
-	return;
-
-    if (cstate->chal_transmits >= cstate->max_transmits) {
-	/* give up on peer */
-	error("Peer failed to respond to CHAP challenge");
-	cstate->serverstate = CHAPSS_BADAUTH;
-	auth_peer_fail(cstate->unit, PPP_CHAP);
-	return;
-    }
-
-    ChapSendChallenge(cstate);		/* Re-send challenge */
-}
-
-
-/*
- * ChapResponseTimeout - Timeout expired on sending response.
- */
-static void
-ChapResponseTimeout(arg)
-    void *arg;
-{
-    chap_state *cstate = (chap_state *) arg;
-
-    /* if we aren't sending a response, don't worry. */
-    if (cstate->clientstate != CHAPCS_RESPONSE)
-	return;
-
-    ChapSendResponse(cstate);		/* re-send response */
-}
-
-
-/*
- * ChapRechallenge - Time to challenge the peer again.
- */
-static void
-ChapRechallenge(arg)
-    void *arg;
-{
-    chap_state *cstate = (chap_state *) arg;
-
-    /* if we aren't sending a response, don't worry. */
-    if (cstate->serverstate != CHAPSS_OPEN)
-	return;
-
-    ChapGenChallenge(cstate);
-    ChapSendChallenge(cstate);
-    cstate->serverstate = CHAPSS_RECHALLENGE;
-}
-
-
-/*
- * ChapLowerUp - The lower layer is up.
- *
- * Start up if we have pending requests.
- */
-static void
-ChapLowerUp(unit)
-    int unit;
-{
-    chap_state *cstate = &chap[unit];
-  
-    if (cstate->clientstate == CHAPCS_INITIAL)
-	cstate->clientstate = CHAPCS_CLOSED;
-    else if (cstate->clientstate == CHAPCS_PENDING)
-	cstate->clientstate = CHAPCS_LISTEN;
-
-    if (cstate->serverstate == CHAPSS_INITIAL)
-	cstate->serverstate = CHAPSS_CLOSED;
-    else if (cstate->serverstate == CHAPSS_PENDING) {
-	ChapGenChallenge(cstate);
-	ChapSendChallenge(cstate);
-	cstate->serverstate = CHAPSS_INITIAL_CHAL;
-    }
-}
-
-
-/*
- * ChapLowerDown - The lower layer is down.
- *
- * Cancel all timeouts.
- */
-static void
-ChapLowerDown(unit)
-    int unit;
-{
-    chap_state *cstate = &chap[unit];
-  
-    /* Timeout(s) pending?  Cancel if so. */
-    if (cstate->serverstate == CHAPSS_INITIAL_CHAL ||
-	cstate->serverstate == CHAPSS_RECHALLENGE)
-	UNTIMEOUT(ChapChallengeTimeout, cstate);
-    else if (cstate->serverstate == CHAPSS_OPEN
-	     && cstate->chal_interval != 0)
-	UNTIMEOUT(ChapRechallenge, cstate);
-    if (cstate->clientstate == CHAPCS_RESPONSE)
-	UNTIMEOUT(ChapResponseTimeout, cstate);
-
-    cstate->clientstate = CHAPCS_INITIAL;
-    cstate->serverstate = CHAPSS_INITIAL;
-}
-
-
-/*
- * ChapProtocolReject - Peer doesn't grok CHAP.
- */
-static void
-ChapProtocolReject(unit)
-    int unit;
-{
-    chap_state *cstate = &chap[unit];
-
-    if (cstate->serverstate != CHAPSS_INITIAL &&
-	cstate->serverstate != CHAPSS_CLOSED)
-	auth_peer_fail(unit, PPP_CHAP);
-    if (cstate->clientstate != CHAPCS_INITIAL &&
-	cstate->clientstate != CHAPCS_CLOSED)
-	auth_withpeer_fail(unit, PPP_CHAP);
-    ChapLowerDown(unit);		/* shutdown chap */
-}
-
-
-/*
- * ChapInput - Input CHAP packet.
- */
-static void
-ChapInput(unit, inpacket, packet_len)
-    int unit;
-    u_char *inpacket;
-    int packet_len;
-{
-    chap_state *cstate = &chap[unit];
-    u_char *inp;
-    u_char code, id;
-    int len;
-  
-    /*
-     * Parse header (code, id and length).
-     * If packet too short, drop it.
-     */
-    inp = inpacket;
-    if (packet_len < CHAP_HEADERLEN) {
-	CHAPDEBUG(("ChapInput: rcvd short header."));
-	return;
-    }
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    GETSHORT(len, inp);
-    if (len < CHAP_HEADERLEN) {
-	CHAPDEBUG(("ChapInput: rcvd illegal length."));
-	return;
-    }
-    if (len > packet_len) {
-	CHAPDEBUG(("ChapInput: rcvd short packet."));
-	return;
-    }
-    len -= CHAP_HEADERLEN;
-  
-    /*
-     * Action depends on code (as in fact it usually does :-).
-     */
-    switch (code) {
-    case CHAP_CHALLENGE:
-	ChapReceiveChallenge(cstate, inp, id, len);
-	break;
-    
-    case CHAP_RESPONSE:
-	ChapReceiveResponse(cstate, inp, id, len);
-	break;
-    
-    case CHAP_FAILURE:
-	ChapReceiveFailure(cstate, inp, id, len);
-	break;
-
-    case CHAP_SUCCESS:
-	ChapReceiveSuccess(cstate, inp, id, len);
-	break;
-
-    default:				/* Need code reject? */
-	warn("Unknown CHAP code (%d) received.", code);
-	break;
-    }
-}
-
-
-/*
- * ChapReceiveChallenge - Receive Challenge and send Response.
- */
-static void
-ChapReceiveChallenge(cstate, inp, id, len)
-    chap_state *cstate;
-    u_char *inp;
-    int id;
-    int len;
-{
-    int rchallenge_len;
-    u_char *rchallenge;
-    int secret_len;
-    char secret[MAXSECRETLEN];
-    char rhostname[256];
-    MD5_CTX mdContext;
-    u_char hash[MD5_SIGNATURE_SIZE];
- 
-    if (cstate->clientstate == CHAPCS_CLOSED ||
-	cstate->clientstate == CHAPCS_PENDING) {
-	CHAPDEBUG(("ChapReceiveChallenge: in state %d", cstate->clientstate));
-	return;
-    }
-
-    if (len < 2) {
-	CHAPDEBUG(("ChapReceiveChallenge: rcvd short packet."));
-	return;
-    }
-
-    GETCHAR(rchallenge_len, inp);
-    len -= sizeof (u_char) + rchallenge_len;	/* now name field length */
-    if (len < 0) {
-	CHAPDEBUG(("ChapReceiveChallenge: rcvd short packet."));
-	return;
-    }
-    rchallenge = inp;
-    INCPTR(rchallenge_len, inp);
-
-    if (len >= sizeof(rhostname))
-	len = sizeof(rhostname) - 1;
-    BCOPY(inp, rhostname, len);
-    rhostname[len] = '\000';
-
-    /* Microsoft doesn't send their name back in the PPP packet */
-    if (explicit_remote || (remote_name[0] != 0 && rhostname[0] == 0)) {
-	strlcpy(rhostname, remote_name, sizeof(rhostname));
-	CHAPDEBUG(("ChapReceiveChallenge: using '%q' as remote name",
-		   rhostname));
-    }
-
-    /* get secret for authenticating ourselves with the specified host */
-    if (!get_secret(cstate->unit, cstate->resp_name, rhostname,
-		    secret, &secret_len, 0)) {
-	secret_len = 0;		/* assume null secret if can't find one */
-	warn("No CHAP secret found for authenticating us to %q", rhostname);
-    }
-
-    /* cancel response send timeout if necessary */
-    if (cstate->clientstate == CHAPCS_RESPONSE)
-	UNTIMEOUT(ChapResponseTimeout, cstate);
-
-    cstate->resp_id = id;
-    cstate->resp_transmits = 0;
-
-    /*  generate MD based on negotiated type */
-    switch (cstate->resp_type) { 
-
-    case CHAP_DIGEST_MD5:
-	MD5Init(&mdContext);
-	MD5Update(&mdContext, &cstate->resp_id, 1);
-	MD5Update(&mdContext, secret, secret_len);
-	MD5Update(&mdContext, rchallenge, rchallenge_len);
-	MD5Final(hash, &mdContext);
-	BCOPY(hash, cstate->response, MD5_SIGNATURE_SIZE);
-	cstate->resp_length = MD5_SIGNATURE_SIZE;
-	break;
-
-#ifdef CHAPMS
-    case CHAP_MICROSOFT:
-	ChapMS(cstate, rchallenge, rchallenge_len, secret, secret_len);
-	break;
-#endif
-
-    default:
-	CHAPDEBUG(("unknown digest type %d", cstate->resp_type));
-	return;
-    }
-
-    BZERO(secret, sizeof(secret));
-    ChapSendResponse(cstate);
-}
-
-
-/*
- * ChapReceiveResponse - Receive and process response.
- */
-static void
-ChapReceiveResponse(cstate, inp, id, len)
-    chap_state *cstate;
-    u_char *inp;
-    int id;
-    int len;
-{
-    u_char *remmd, remmd_len;
-    int secret_len, old_state;
-    int code;
-    char rhostname[256];
-    MD5_CTX mdContext;
-    char secret[MAXSECRETLEN];
-    u_char hash[MD5_SIGNATURE_SIZE];
-
-    if (cstate->serverstate == CHAPSS_CLOSED ||
-	cstate->serverstate == CHAPSS_PENDING) {
-	CHAPDEBUG(("ChapReceiveResponse: in state %d", cstate->serverstate));
-	return;
-    }
-
-    if (id != cstate->chal_id)
-	return;			/* doesn't match ID of last challenge */
-
-    /*
-     * If we have received a duplicate or bogus Response,
-     * we have to send the same answer (Success/Failure)
-     * as we did for the first Response we saw.
-     */
-    if (cstate->serverstate == CHAPSS_OPEN) {
-	ChapSendStatus(cstate, CHAP_SUCCESS);
-	return;
-    }
-    if (cstate->serverstate == CHAPSS_BADAUTH) {
-	ChapSendStatus(cstate, CHAP_FAILURE);
-	return;
-    }
-
-    if (len < 2) {
-	CHAPDEBUG(("ChapReceiveResponse: rcvd short packet."));
-	return;
-    }
-    GETCHAR(remmd_len, inp);		/* get length of MD */
-    remmd = inp;			/* get pointer to MD */
-    INCPTR(remmd_len, inp);
-
-    len -= sizeof (u_char) + remmd_len;
-    if (len < 0) {
-	CHAPDEBUG(("ChapReceiveResponse: rcvd short packet."));
-	return;
-    }
-
-    UNTIMEOUT(ChapChallengeTimeout, cstate);
-
-    if (len >= sizeof(rhostname))
-	len = sizeof(rhostname) - 1;
-    BCOPY(inp, rhostname, len);
-    rhostname[len] = '\000';
-
-    /*
-     * Get secret for authenticating them with us,
-     * do the hash ourselves, and compare the result.
-     */
-    code = CHAP_FAILURE;
-    if (!get_secret(cstate->unit, (explicit_remote? remote_name: rhostname),
-		    cstate->chal_name, secret, &secret_len, 1)) {
-	warn("No CHAP secret found for authenticating %q", rhostname);
-    } else {
-
-	/*  generate MD based on negotiated type */
-	switch (cstate->chal_type) { 
-
-	case CHAP_DIGEST_MD5:		/* only MD5 is defined for now */
-	    if (remmd_len != MD5_SIGNATURE_SIZE)
-		break;			/* it's not even the right length */
-	    MD5Init(&mdContext);
-	    MD5Update(&mdContext, &cstate->chal_id, 1);
-	    MD5Update(&mdContext, secret, secret_len);
-	    MD5Update(&mdContext, cstate->challenge, cstate->chal_len);
-	    MD5Final(hash, &mdContext); 
-
-	    /* compare local and remote MDs and send the appropriate status */
-	    if (memcmp (hash, remmd, MD5_SIGNATURE_SIZE) == 0)
-		code = CHAP_SUCCESS;	/* they are the same! */
-	    break;
-
-	default:
-	    CHAPDEBUG(("unknown digest type %d", cstate->chal_type));
-	}
-    }
-
-    BZERO(secret, sizeof(secret));
-    ChapSendStatus(cstate, code);
-
-    if (code == CHAP_SUCCESS) {
-	old_state = cstate->serverstate;
-	cstate->serverstate = CHAPSS_OPEN;
-	if (old_state == CHAPSS_INITIAL_CHAL) {
-	    auth_peer_success(cstate->unit, PPP_CHAP, rhostname, len);
-	}
-	if (cstate->chal_interval != 0)
-	    TIMEOUT(ChapRechallenge, cstate, cstate->chal_interval);
-	notice("CHAP peer authentication succeeded for %q", rhostname);
-
-    } else {
-	error("CHAP peer authentication failed for remote host %q", rhostname);
-	cstate->serverstate = CHAPSS_BADAUTH;
-	auth_peer_fail(cstate->unit, PPP_CHAP);
-    }
-}
-
-/*
- * ChapReceiveSuccess - Receive Success
- */
-static void
-ChapReceiveSuccess(cstate, inp, id, len)
-    chap_state *cstate;
-    u_char *inp;
-    u_char id;
-    int len;
-{
-
-    if (cstate->clientstate == CHAPCS_OPEN)
-	/* presumably an answer to a duplicate response */
-	return;
-
-    if (cstate->clientstate != CHAPCS_RESPONSE) {
-	/* don't know what this is */
-	CHAPDEBUG(("ChapReceiveSuccess: in state %d\n", cstate->clientstate));
-	return;
-    }
-
-    UNTIMEOUT(ChapResponseTimeout, cstate);
-
-    /*
-     * Print message.
-     */
-    if (len > 0)
-	PRINTMSG(inp, len);
-
-    cstate->clientstate = CHAPCS_OPEN;
-
-    auth_withpeer_success(cstate->unit, PPP_CHAP);
-}
-
-
-/*
- * ChapReceiveFailure - Receive failure.
- */
-static void
-ChapReceiveFailure(cstate, inp, id, len)
-    chap_state *cstate;
-    u_char *inp;
-    u_char id;
-    int len;
-{
-    if (cstate->clientstate != CHAPCS_RESPONSE) {
-	/* don't know what this is */
-	CHAPDEBUG(("ChapReceiveFailure: in state %d\n", cstate->clientstate));
-	return;
-    }
-
-    UNTIMEOUT(ChapResponseTimeout, cstate);
-
-    /*
-     * Print message.
-     */
-    if (len > 0)
-	PRINTMSG(inp, len);
-
-    error("CHAP authentication failed");
-    auth_withpeer_fail(cstate->unit, PPP_CHAP);
-}
-
-
-/*
- * ChapSendChallenge - Send an Authenticate challenge.
- */
-static void
-ChapSendChallenge(cstate)
-    chap_state *cstate;
-{
-    u_char *outp;
-    int chal_len, name_len;
-    int outlen;
-
-    chal_len = cstate->chal_len;
-    name_len = strlen(cstate->chal_name);
-    outlen = CHAP_HEADERLEN + sizeof (u_char) + chal_len + name_len;
-    outp = outpacket_buf;
-
-    MAKEHEADER(outp, PPP_CHAP);		/* paste in a CHAP header */
-
-    PUTCHAR(CHAP_CHALLENGE, outp);
-    PUTCHAR(cstate->chal_id, outp);
-    PUTSHORT(outlen, outp);
-
-    PUTCHAR(chal_len, outp);		/* put length of challenge */
-    BCOPY(cstate->challenge, outp, chal_len);
-    INCPTR(chal_len, outp);
-
-    BCOPY(cstate->chal_name, outp, name_len);	/* append hostname */
-
-    output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-  
-    TIMEOUT(ChapChallengeTimeout, cstate, cstate->timeouttime);
-    ++cstate->chal_transmits;
-}
-
-
-/*
- * ChapSendStatus - Send a status response (ack or nak).
- */
-static void
-ChapSendStatus(cstate, code)
-    chap_state *cstate;
-    int code;
-{
-    u_char *outp;
-    int outlen, msglen;
-    char msg[256];
-
-    if (code == CHAP_SUCCESS)
-	slprintf(msg, sizeof(msg), "Welcome to %s.", hostname);
-    else
-	slprintf(msg, sizeof(msg), "I don't like you.  Go 'way.");
-    msglen = strlen(msg);
-
-    outlen = CHAP_HEADERLEN + msglen;
-    outp = outpacket_buf;
-
-    MAKEHEADER(outp, PPP_CHAP);	/* paste in a header */
-  
-    PUTCHAR(code, outp);
-    PUTCHAR(cstate->chal_id, outp);
-    PUTSHORT(outlen, outp);
-    BCOPY(msg, outp, msglen);
-    output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-/*
- * ChapGenChallenge is used to generate a pseudo-random challenge string of
- * a pseudo-random length between min_len and max_len.  The challenge
- * string and its length are stored in *cstate, and various other fields of
- * *cstate are initialized.
- */
-
-static void
-ChapGenChallenge(cstate)
-    chap_state *cstate;
-{
-    int chal_len;
-    u_char *ptr = cstate->challenge;
-    int i;
-
-    /* pick a random challenge length between MIN_CHALLENGE_LENGTH and 
-       MAX_CHALLENGE_LENGTH */  
-    chal_len =  (unsigned) ((drand48() *
-			     (MAX_CHALLENGE_LENGTH - MIN_CHALLENGE_LENGTH)) +
-			    MIN_CHALLENGE_LENGTH);
-    cstate->chal_len = chal_len;
-    cstate->chal_id = ++cstate->id;
-    cstate->chal_transmits = 0;
-
-    /* generate a random string */
-    for (i = 0; i < chal_len; i++)
-	*ptr++ = (char) (drand48() * 0xff);
-}
-
-/*
- * ChapSendResponse - send a response packet with values as specified
- * in *cstate.
- */
-/* ARGSUSED */
-static void
-ChapSendResponse(cstate)
-    chap_state *cstate;
-{
-    u_char *outp;
-    int outlen, md_len, name_len;
-
-    md_len = cstate->resp_length;
-    name_len = strlen(cstate->resp_name);
-    outlen = CHAP_HEADERLEN + sizeof (u_char) + md_len + name_len;
-    outp = outpacket_buf;
-
-    MAKEHEADER(outp, PPP_CHAP);
-
-    PUTCHAR(CHAP_RESPONSE, outp);	/* we are a response */
-    PUTCHAR(cstate->resp_id, outp);	/* copy id from challenge packet */
-    PUTSHORT(outlen, outp);		/* packet length */
-
-    PUTCHAR(md_len, outp);		/* length of MD */
-    BCOPY(cstate->response, outp, md_len);	/* copy MD to buffer */
-    INCPTR(md_len, outp);
-
-    BCOPY(cstate->resp_name, outp, name_len); /* append our name */
-
-    /* send the packet */
-    output(cstate->unit, outpacket_buf, outlen + PPP_HDRLEN);
-
-    cstate->clientstate = CHAPCS_RESPONSE;
-    TIMEOUT(ChapResponseTimeout, cstate, cstate->timeouttime);
-    ++cstate->resp_transmits;
-}
-
-/*
- * ChapPrintPkt - print the contents of a CHAP packet.
- */
-static char *ChapCodenames[] = {
-    "Challenge", "Response", "Success", "Failure"
-};
-
-static int
-ChapPrintPkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len;
-    int clen, nlen;
-    u_char x;
-
-    if (plen < CHAP_HEADERLEN)
-	return 0;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < CHAP_HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ChapCodenames) / sizeof(char *))
-	printer(arg, " %s", ChapCodenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= CHAP_HEADERLEN;
-    switch (code) {
-    case CHAP_CHALLENGE:
-    case CHAP_RESPONSE:
-	if (len < 1)
-	    break;
-	clen = p[0];
-	if (len < clen + 1)
-	    break;
-	++p;
-	nlen = len - clen - 1;
-	printer(arg, " <");
-	for (; clen > 0; --clen) {
-	    GETCHAR(x, p);
-	    printer(arg, "%.2x", x);
-	}
-	printer(arg, ">, name = ");
-	print_string((char *)p, nlen, printer, arg);
-	break;
-    case CHAP_FAILURE:
-    case CHAP_SUCCESS:
-	printer(arg, " ");
-	print_string((char *)p, len, printer, arg);
-	break;
-    default:
-	for (clen = len; clen > 0; --clen) {
-	    GETCHAR(x, p);
-	    printer(arg, " %.2x", x);
-	}
-    }
-
-    return len + CHAP_HEADERLEN;
-}
diff --git a/mdk-stage1/ppp/pppd/chap.h b/mdk-stage1/ppp/pppd/chap.h
deleted file mode 100644
index 945d051d0..000000000
--- a/mdk-stage1/ppp/pppd/chap.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * chap.h - Challenge Handshake Authentication Protocol definitions.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Copyright (c) 1991 Gregory M. Christy
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the author.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-#ifndef __CHAP_INCLUDE__
-
-/* Code + ID + length */
-#define CHAP_HEADERLEN		4
-
-/*
- * CHAP codes.
- */
-
-#define CHAP_DIGEST_MD5		5	/* use MD5 algorithm */
-#define MD5_SIGNATURE_SIZE	16	/* 16 bytes in a MD5 message digest */
-#define CHAP_MICROSOFT		0x80	/* use Microsoft-compatible alg. */
-#define MS_CHAP_RESPONSE_LEN	49	/* Response length for MS-CHAP */
-
-#define CHAP_CHALLENGE		1
-#define CHAP_RESPONSE		2
-#define CHAP_SUCCESS		3
-#define CHAP_FAILURE    	4
-
-/*
- *  Challenge lengths (for challenges we send) and other limits.
- */
-#define MIN_CHALLENGE_LENGTH	16
-#define MAX_CHALLENGE_LENGTH	24
-#define MAX_RESPONSE_LENGTH	64	/* sufficient for MD5 or MS-CHAP */
-
-/*
- * Each interface is described by a chap structure.
- */
-
-typedef struct chap_state {
-    int unit;			/* Interface unit number */
-    int clientstate;		/* Client state */
-    int serverstate;		/* Server state */
-    u_char challenge[MAX_CHALLENGE_LENGTH]; /* last challenge string sent */
-    u_char chal_len;		/* challenge length */
-    u_char chal_id;		/* ID of last challenge */
-    u_char chal_type;		/* hash algorithm for challenges */
-    u_char id;			/* Current id */
-    char *chal_name;		/* Our name to use with challenge */
-    int chal_interval;		/* Time until we challenge peer again */
-    int timeouttime;		/* Timeout time in seconds */
-    int max_transmits;		/* Maximum # of challenge transmissions */
-    int chal_transmits;		/* Number of transmissions of challenge */
-    int resp_transmits;		/* Number of transmissions of response */
-    u_char response[MAX_RESPONSE_LENGTH];	/* Response to send */
-    u_char resp_length;		/* length of response */
-    u_char resp_id;		/* ID for response messages */
-    u_char resp_type;		/* hash algorithm for responses */
-    char *resp_name;		/* Our name to send with response */
-} chap_state;
-
-
-/*
- * Client (peer) states.
- */
-#define CHAPCS_INITIAL		0	/* Lower layer down, not opened */
-#define CHAPCS_CLOSED		1	/* Lower layer up, not opened */
-#define CHAPCS_PENDING		2	/* Auth us to peer when lower up */
-#define CHAPCS_LISTEN		3	/* Listening for a challenge */
-#define CHAPCS_RESPONSE		4	/* Sent response, waiting for status */
-#define CHAPCS_OPEN		5	/* We've received Success */
-
-/*
- * Server (authenticator) states.
- */
-#define CHAPSS_INITIAL		0	/* Lower layer down, not opened */
-#define CHAPSS_CLOSED		1	/* Lower layer up, not opened */
-#define CHAPSS_PENDING		2	/* Auth peer when lower up */
-#define CHAPSS_INITIAL_CHAL	3	/* We've sent the first challenge */
-#define CHAPSS_OPEN		4	/* We've sent a Success msg */
-#define CHAPSS_RECHALLENGE	5	/* We've sent another challenge */
-#define CHAPSS_BADAUTH		6	/* We've sent a Failure msg */
-
-/*
- * Timeouts.
- */
-#define CHAP_DEFTIMEOUT		3	/* Timeout time in seconds */
-#define CHAP_DEFTRANSMITS	10	/* max # times to send challenge */
-
-extern chap_state chap[];
-
-void ChapAuthWithPeer __P((int, char *, int));
-void ChapAuthPeer __P((int, char *, int));
-
-extern struct protent chap_protent;
-
-#define __CHAP_INCLUDE__
-#endif /* __CHAP_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/chap_ms.c b/mdk-stage1/ppp/pppd/chap_ms.c
deleted file mode 100644
index 81a57bb5a..000000000
--- a/mdk-stage1/ppp/pppd/chap_ms.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * chap_ms.c - Microsoft MS-CHAP compatible implementation.
- *
- * Copyright (c) 1995 Eric Rosenquist, Strata Software Limited.
- * http://www.strataware.com/
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Eric Rosenquist.  The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/*
- * Modifications by Lauri Pesonen / lpesonen@clinet.fi, april 1997
- *
- *   Implemented LANManager type password response to MS-CHAP challenges.
- *   Now pppd provides both NT style and LANMan style blocks, and the
- *   prefered is set by option "ms-lanman". Default is to use NT.
- *   The hash text (StdText) was taken from Win95 RASAPI32.DLL.
- *
- *   You should also use DOMAIN\\USERNAME as described in README.MSCHAP80
- */
-
-#define RCSID	"$Id$"
-
-#ifdef CHAPMS
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <unistd.h>
-#ifdef HAVE_CRYPT_H
-#include <crypt.h>
-#endif
-
-#include "pppd.h"
-#include "chap.h"
-#include "chap_ms.h"
-#include "md4.h"
-
-#ifndef USE_CRYPT
-#include <des.h>
-#endif
-
-static const char rcsid[] = RCSID;
-
-typedef struct {
-    u_char LANManResp[24];
-    u_char NTResp[24];
-    u_char UseNT;		/* If 1, ignore the LANMan response field */
-} MS_ChapResponse;
-/* We use MS_CHAP_RESPONSE_LEN, rather than sizeof(MS_ChapResponse),
-   in case this struct gets padded. */
-
-
-static void	ChallengeResponse __P((u_char *, u_char *, u_char *));
-static void	DesEncrypt __P((u_char *, u_char *, u_char *));
-static void	MakeKey __P((u_char *, u_char *));
-static u_char	Get7Bits __P((u_char *, int));
-static void	ChapMS_NT __P((char *, int, char *, int, MS_ChapResponse *));
-#ifdef MSLANMAN
-static void	ChapMS_LANMan __P((char *, int, char *, int, MS_ChapResponse *));
-#endif
-
-#ifdef USE_CRYPT
-static void	Expand __P((u_char *, u_char *));
-static void	Collapse __P((u_char *, u_char *));
-#endif
-
-#ifdef MSLANMAN
-bool	ms_lanman = 0;    	/* Use LanMan password instead of NT */
-			  	/* Has meaning only with MS-CHAP challenges */
-#endif
-
-static void
-ChallengeResponse(challenge, pwHash, response)
-    u_char *challenge;	/* IN   8 octets */
-    u_char *pwHash;	/* IN  16 octets */
-    u_char *response;	/* OUT 24 octets */
-{
-    char    ZPasswordHash[21];
-
-    BZERO(ZPasswordHash, sizeof(ZPasswordHash));
-    BCOPY(pwHash, ZPasswordHash, MD4_SIGNATURE_SIZE);
-
-#if 0
-    dbglog("ChallengeResponse - ZPasswordHash %.*B",
-	   sizeof(ZPasswordHash), ZPasswordHash);
-#endif
-
-    DesEncrypt(challenge, ZPasswordHash +  0, response + 0);
-    DesEncrypt(challenge, ZPasswordHash +  7, response + 8);
-    DesEncrypt(challenge, ZPasswordHash + 14, response + 16);
-
-#if 0
-    dbglog("ChallengeResponse - response %.24B", response);
-#endif
-}
-
-
-#ifdef USE_CRYPT
-static void
-DesEncrypt(clear, key, cipher)
-    u_char *clear;	/* IN  8 octets */
-    u_char *key;	/* IN  7 octets */
-    u_char *cipher;	/* OUT 8 octets */
-{
-    u_char des_key[8];
-    u_char crypt_key[66];
-    u_char des_input[66];
-
-    MakeKey(key, des_key);
-
-    Expand(des_key, crypt_key);
-    setkey(crypt_key);
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet input : %.8B", clear));
-#endif
-
-    Expand(clear, des_input);
-    encrypt(des_input, 0);
-    Collapse(des_input, cipher);
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet output: %.8B", cipher));
-#endif
-}
-
-#else /* USE_CRYPT */
-
-static void
-DesEncrypt(clear, key, cipher)
-    u_char *clear;	/* IN  8 octets */
-    u_char *key;	/* IN  7 octets */
-    u_char *cipher;	/* OUT 8 octets */
-{
-    des_cblock		des_key;
-    des_key_schedule	key_schedule;
-
-    MakeKey(key, des_key);
-
-    des_set_key(&des_key, key_schedule);
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet input : %.8B", clear));
-#endif
-
-    des_ecb_encrypt((des_cblock *)clear, (des_cblock *)cipher, key_schedule, 1);
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "DesEncrypt: 8 octet output: %.8B", cipher));
-#endif
-}
-
-#endif /* USE_CRYPT */
-
-
-static u_char Get7Bits(input, startBit)
-    u_char *input;
-    int startBit;
-{
-    register unsigned int	word;
-
-    word  = (unsigned)input[startBit / 8] << 8;
-    word |= (unsigned)input[startBit / 8 + 1];
-
-    word >>= 15 - (startBit % 8 + 7);
-
-    return word & 0xFE;
-}
-
-#ifdef USE_CRYPT
-
-/* in == 8-byte string (expanded version of the 56-bit key)
- * out == 64-byte string where each byte is either 1 or 0
- * Note that the low-order "bit" is always ignored by by setkey()
- */
-static void Expand(in, out)
-    u_char *in;
-    u_char *out;
-{
-        int j, c;
-        int i;
-
-        for(i = 0; i < 64; in++){
-		c = *in;
-                for(j = 7; j >= 0; j--)
-                        *out++ = (c >> j) & 01;
-                i += 8;
-        }
-}
-
-/* The inverse of Expand
- */
-static void Collapse(in, out)
-    u_char *in;
-    u_char *out;
-{
-        int j;
-        int i;
-	unsigned int c;
-
-	for (i = 0; i < 64; i += 8, out++) {
-	    c = 0;
-	    for (j = 7; j >= 0; j--, in++)
-		c |= *in << j;
-	    *out = c & 0xff;
-	}
-}
-#endif
-
-static void MakeKey(key, des_key)
-    u_char *key;	/* IN  56 bit DES key missing parity bits */
-    u_char *des_key;	/* OUT 64 bit DES key with parity bits added */
-{
-    des_key[0] = Get7Bits(key,  0);
-    des_key[1] = Get7Bits(key,  7);
-    des_key[2] = Get7Bits(key, 14);
-    des_key[3] = Get7Bits(key, 21);
-    des_key[4] = Get7Bits(key, 28);
-    des_key[5] = Get7Bits(key, 35);
-    des_key[6] = Get7Bits(key, 42);
-    des_key[7] = Get7Bits(key, 49);
-
-#ifndef USE_CRYPT
-    des_set_odd_parity((des_cblock *)des_key);
-#endif
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "MakeKey: 56-bit input : %.7B", key));
-    CHAPDEBUG((LOG_INFO, "MakeKey: 64-bit output: %.8B", des_key));
-#endif
-}
-
-static void
-ChapMS_NT(rchallenge, rchallenge_len, secret, secret_len, response)
-    char *rchallenge;
-    int rchallenge_len;
-    char *secret;
-    int secret_len;
-    MS_ChapResponse    *response;
-{
-    int			i;
-#ifdef __NetBSD__
-    /* NetBSD uses the libc md4 routines which take bytes instead of bits */
-    int			mdlen = secret_len * 2;
-#else
-    int			mdlen = secret_len * 2 * 8;
-#endif
-    MD4_CTX		md4Context;
-    u_char		hash[MD4_SIGNATURE_SIZE];
-    u_char		unicodePassword[MAX_NT_PASSWORD * 2];
-
-    /* Initialize the Unicode version of the secret (== password). */
-    /* This implicitly supports 8-bit ISO8859/1 characters. */
-    BZERO(unicodePassword, sizeof(unicodePassword));
-    for (i = 0; i < secret_len; i++)
-	unicodePassword[i * 2] = (u_char)secret[i];
-
-    MD4Init(&md4Context);
-    MD4Update(&md4Context, unicodePassword, mdlen);
-
-    MD4Final(hash, &md4Context); 	/* Tell MD4 we're done */
-
-    ChallengeResponse(rchallenge, hash, response->NTResp);
-}
-
-#ifdef MSLANMAN
-static u_char *StdText = (u_char *)"KGS!@#$%"; /* key from rasapi32.dll */
-
-static void
-ChapMS_LANMan(rchallenge, rchallenge_len, secret, secret_len, response)
-    char *rchallenge;
-    int rchallenge_len;
-    char *secret;
-    int secret_len;
-    MS_ChapResponse	*response;
-{
-    int			i;
-    u_char		UcasePassword[MAX_NT_PASSWORD]; /* max is actually 14 */
-    u_char		PasswordHash[MD4_SIGNATURE_SIZE];
-
-    /* LANMan password is case insensitive */
-    BZERO(UcasePassword, sizeof(UcasePassword));
-    for (i = 0; i < secret_len; i++)
-       UcasePassword[i] = (u_char)toupper(secret[i]);
-    DesEncrypt( StdText, UcasePassword + 0, PasswordHash + 0 );
-    DesEncrypt( StdText, UcasePassword + 7, PasswordHash + 8 );
-    ChallengeResponse(rchallenge, PasswordHash, response->LANManResp);
-}
-#endif
-
-void
-ChapMS(cstate, rchallenge, rchallenge_len, secret, secret_len)
-    chap_state *cstate;
-    char *rchallenge;
-    int rchallenge_len;
-    char *secret;
-    int secret_len;
-{
-    MS_ChapResponse	response;
-
-#if 0
-    CHAPDEBUG((LOG_INFO, "ChapMS: secret is '%.*s'", secret_len, secret));
-#endif
-    BZERO(&response, sizeof(response));
-
-    /* Calculate both always */
-    ChapMS_NT(rchallenge, rchallenge_len, secret, secret_len, &response);
-
-#ifdef MSLANMAN
-    ChapMS_LANMan(rchallenge, rchallenge_len, secret, secret_len, &response);
-
-    /* prefered method is set by option  */
-    response.UseNT = !ms_lanman;
-#else
-    response.UseNT = 1;
-#endif
-
-    BCOPY(&response, cstate->response, MS_CHAP_RESPONSE_LEN);
-    cstate->resp_length = MS_CHAP_RESPONSE_LEN;
-}
-
-#endif /* CHAPMS */
diff --git a/mdk-stage1/ppp/pppd/chap_ms.h b/mdk-stage1/ppp/pppd/chap_ms.h
deleted file mode 100644
index fad2755c8..000000000
--- a/mdk-stage1/ppp/pppd/chap_ms.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * chap.h - Challenge Handshake Authentication Protocol definitions.
- *
- * Copyright (c) 1995 Eric Rosenquist, Strata Software Limited.
- * http://www.strataware.com/
- *
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Eric Rosenquist.  The name of the author may not be used to
- * endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-#ifndef __CHAPMS_INCLUDE__
-
-#define MD4_SIGNATURE_SIZE	16	/* 16 bytes in a MD4 message digest */
-#define MAX_NT_PASSWORD	256	/* Maximum number of (Unicode) chars in an NT password */
-
-void ChapMS __P((chap_state *, char *, int, char *, int));
-
-#define __CHAPMS_INCLUDE__
-#endif /* __CHAPMS_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/demand.c b/mdk-stage1/ppp/pppd/demand.c
deleted file mode 100644
index 9a740be8d..000000000
--- a/mdk-stage1/ppp/pppd/demand.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * demand.c - Support routines for demand-dialling.
- *
- * Copyright (c) 1993 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#ifdef PPP_FILTER
-#include <net/if.h>
-#include <net/bpf.h>
-#include <pcap.h>
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "lcp.h"
-
-static const char rcsid[] = RCSID;
-
-char *frame;
-int framelen;
-int framemax;
-int escape_flag;
-int flush_flag;
-int fcs;
-
-struct packet {
-    int length;
-    struct packet *next;
-    unsigned char data[1];
-};
-
-struct packet *pend_q;
-struct packet *pend_qtail;
-
-static int active_packet __P((unsigned char *, int));
-
-/*
- * demand_conf - configure the interface for doing dial-on-demand.
- */
-void
-demand_conf()
-{
-    int i;
-    struct protent *protp;
-
-/*    framemax = lcp_allowoptions[0].mru;
-    if (framemax < PPP_MRU) */
-	framemax = PPP_MRU;
-    framemax += PPP_HDRLEN + PPP_FCSLEN;
-    frame = malloc(framemax);
-    if (frame == NULL)
-	novm("demand frame");
-    framelen = 0;
-    pend_q = NULL;
-    escape_flag = 0;
-    flush_flag = 0;
-    fcs = PPP_INITFCS;
-
-    netif_set_mtu(0, MIN(lcp_allowoptions[0].mru, PPP_MRU));
-    ppp_send_config(0, PPP_MRU, (u_int32_t) 0, 0, 0);
-    ppp_recv_config(0, PPP_MRU, (u_int32_t) 0, 0, 0);
-
-#ifdef PPP_FILTER
-    set_filters(&pass_filter, &active_filter);
-#endif
-
-    /*
-     * Call the demand_conf procedure for each protocol that's got one.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->enabled_flag && protp->demand_conf != NULL)
-	    if (!((*protp->demand_conf)(0)))
-		die(1);
-}
-
-
-/*
- * demand_block - set each network protocol to block further packets.
- */
-void
-demand_block()
-{
-    int i;
-    struct protent *protp;
-
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->enabled_flag && protp->demand_conf != NULL)
-	    sifnpmode(0, protp->protocol & ~0x8000, NPMODE_QUEUE);
-    get_loop_output();
-}
-
-/*
- * demand_discard - set each network protocol to discard packets
- * with an error.
- */
-void
-demand_discard()
-{
-    struct packet *pkt, *nextpkt;
-    int i;
-    struct protent *protp;
-
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->enabled_flag && protp->demand_conf != NULL)
-	    sifnpmode(0, protp->protocol & ~0x8000, NPMODE_ERROR);
-    get_loop_output();
-
-    /* discard all saved packets */
-    for (pkt = pend_q; pkt != NULL; pkt = nextpkt) {
-	nextpkt = pkt->next;
-	free(pkt);
-    }
-    pend_q = NULL;
-    framelen = 0;
-    flush_flag = 0;
-    escape_flag = 0;
-    fcs = PPP_INITFCS;
-}
-
-/*
- * demand_unblock - set each enabled network protocol to pass packets.
- */
-void
-demand_unblock()
-{
-    int i;
-    struct protent *protp;
-
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->enabled_flag && protp->demand_conf != NULL)
-	    sifnpmode(0, protp->protocol & ~0x8000, NPMODE_PASS);
-}
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
-	0x0000,	0x1189,	0x2312,	0x329b,	0x4624,	0x57ad,	0x6536,	0x74bf,
-	0x8c48,	0x9dc1,	0xaf5a,	0xbed3,	0xca6c,	0xdbe5,	0xe97e,	0xf8f7,
-	0x1081,	0x0108,	0x3393,	0x221a,	0x56a5,	0x472c,	0x75b7,	0x643e,
-	0x9cc9,	0x8d40,	0xbfdb,	0xae52,	0xdaed,	0xcb64,	0xf9ff,	0xe876,
-	0x2102,	0x308b,	0x0210,	0x1399,	0x6726,	0x76af,	0x4434,	0x55bd,
-	0xad4a,	0xbcc3,	0x8e58,	0x9fd1,	0xeb6e,	0xfae7,	0xc87c,	0xd9f5,
-	0x3183,	0x200a,	0x1291,	0x0318,	0x77a7,	0x662e,	0x54b5,	0x453c,
-	0xbdcb,	0xac42,	0x9ed9,	0x8f50,	0xfbef,	0xea66,	0xd8fd,	0xc974,
-	0x4204,	0x538d,	0x6116,	0x709f,	0x0420,	0x15a9,	0x2732,	0x36bb,
-	0xce4c,	0xdfc5,	0xed5e,	0xfcd7,	0x8868,	0x99e1,	0xab7a,	0xbaf3,
-	0x5285,	0x430c,	0x7197,	0x601e,	0x14a1,	0x0528,	0x37b3,	0x263a,
-	0xdecd,	0xcf44,	0xfddf,	0xec56,	0x98e9,	0x8960,	0xbbfb,	0xaa72,
-	0x6306,	0x728f,	0x4014,	0x519d,	0x2522,	0x34ab,	0x0630,	0x17b9,
-	0xef4e,	0xfec7,	0xcc5c,	0xddd5,	0xa96a,	0xb8e3,	0x8a78,	0x9bf1,
-	0x7387,	0x620e,	0x5095,	0x411c,	0x35a3,	0x242a,	0x16b1,	0x0738,
-	0xffcf,	0xee46,	0xdcdd,	0xcd54,	0xb9eb,	0xa862,	0x9af9,	0x8b70,
-	0x8408,	0x9581,	0xa71a,	0xb693,	0xc22c,	0xd3a5,	0xe13e,	0xf0b7,
-	0x0840,	0x19c9,	0x2b52,	0x3adb,	0x4e64,	0x5fed,	0x6d76,	0x7cff,
-	0x9489,	0x8500,	0xb79b,	0xa612,	0xd2ad,	0xc324,	0xf1bf,	0xe036,
-	0x18c1,	0x0948,	0x3bd3,	0x2a5a,	0x5ee5,	0x4f6c,	0x7df7,	0x6c7e,
-	0xa50a,	0xb483,	0x8618,	0x9791,	0xe32e,	0xf2a7,	0xc03c,	0xd1b5,
-	0x2942,	0x38cb,	0x0a50,	0x1bd9,	0x6f66,	0x7eef,	0x4c74,	0x5dfd,
-	0xb58b,	0xa402,	0x9699,	0x8710,	0xf3af,	0xe226,	0xd0bd,	0xc134,
-	0x39c3,	0x284a,	0x1ad1,	0x0b58,	0x7fe7,	0x6e6e,	0x5cf5,	0x4d7c,
-	0xc60c,	0xd785,	0xe51e,	0xf497,	0x8028,	0x91a1,	0xa33a,	0xb2b3,
-	0x4a44,	0x5bcd,	0x6956,	0x78df,	0x0c60,	0x1de9,	0x2f72,	0x3efb,
-	0xd68d,	0xc704,	0xf59f,	0xe416,	0x90a9,	0x8120,	0xb3bb,	0xa232,
-	0x5ac5,	0x4b4c,	0x79d7,	0x685e,	0x1ce1,	0x0d68,	0x3ff3,	0x2e7a,
-	0xe70e,	0xf687,	0xc41c,	0xd595,	0xa12a,	0xb0a3,	0x8238,	0x93b1,
-	0x6b46,	0x7acf,	0x4854,	0x59dd,	0x2d62,	0x3ceb,	0x0e70,	0x1ff9,
-	0xf78f,	0xe606,	0xd49d,	0xc514,	0xb1ab,	0xa022,	0x92b9,	0x8330,
-	0x7bc7,	0x6a4e,	0x58d5,	0x495c,	0x3de3,	0x2c6a,	0x1ef1,	0x0f78
-};
-
-/*
- * loop_chars - process characters received from the loopback.
- * Calls loop_frame when a complete frame has been accumulated.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-loop_chars(p, n)
-    unsigned char *p;
-    int n;
-{
-    int c, rv;
-
-    rv = 0;
-    for (; n > 0; --n) {
-	c = *p++;
-	if (c == PPP_FLAG) {
-	    if (!escape_flag && !flush_flag
-		&& framelen > 2 && fcs == PPP_GOODFCS) {
-		framelen -= 2;
-		if (loop_frame((unsigned char *)frame, framelen))
-		    rv = 1;
-	    }
-	    framelen = 0;
-	    flush_flag = 0;
-	    escape_flag = 0;
-	    fcs = PPP_INITFCS;
-	    continue;
-	}
-	if (flush_flag)
-	    continue;
-	if (escape_flag) {
-	    c ^= PPP_TRANS;
-	    escape_flag = 0;
-	} else if (c == PPP_ESCAPE) {
-	    escape_flag = 1;
-	    continue;
-	}
-	if (framelen >= framemax) {
-	    flush_flag = 1;
-	    continue;
-	}
-	frame[framelen++] = c;
-	fcs = PPP_FCS(fcs, c);
-    }
-    return rv;
-}
-
-/*
- * loop_frame - given a frame obtained from the loopback,
- * decide whether to bring up the link or not, and, if we want
- * to transmit this frame later, put it on the pending queue.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- * We assume that the kernel driver has already applied the
- * pass_filter, so we won't get packets it rejected.
- * We apply the active_filter to see if we want this packet to
- * bring up the link.
- */
-int
-loop_frame(frame, len)
-    unsigned char *frame;
-    int len;
-{
-    struct packet *pkt;
-
-    /* dbglog("from loop: %P", frame, len); */
-    if (len < PPP_HDRLEN)
-	return 0;
-    if ((PPP_PROTOCOL(frame) & 0x8000) != 0)
-	return 0;		/* shouldn't get any of these anyway */
-    if (!active_packet(frame, len))
-	return 0;
-
-    pkt = (struct packet *) malloc(sizeof(struct packet) + len);
-    if (pkt != NULL) {
-	pkt->length = len;
-	pkt->next = NULL;
-	memcpy(pkt->data, frame, len);
-	if (pend_q == NULL)
-	    pend_q = pkt;
-	else
-	    pend_qtail->next = pkt;
-	pend_qtail = pkt;
-    }
-    return 1;
-}
-
-/*
- * demand_rexmit - Resend all those frames which we got via the
- * loopback, now that the real serial link is up.
- */
-void
-demand_rexmit(proto)
-    int proto;
-{
-    struct packet *pkt, *prev, *nextpkt;
-
-    prev = NULL;
-    pkt = pend_q;
-    pend_q = NULL;
-    for (; pkt != NULL; pkt = nextpkt) {
-	nextpkt = pkt->next;
-	if (PPP_PROTOCOL(pkt->data) == proto) {
-	    output(0, pkt->data, pkt->length);
-	    free(pkt);
-	} else {
-	    if (prev == NULL)
-		pend_q = pkt;
-	    else
-		prev->next = pkt;
-	    prev = pkt;
-	}
-    }
-    pend_qtail = prev;
-    if (prev != NULL)
-	prev->next = NULL;
-}
-
-/*
- * Scan a packet to decide whether it is an "active" packet,
- * that is, whether it is worth bringing up the link for.
- */
-static int
-active_packet(p, len)
-    unsigned char *p;
-    int len;
-{
-    int proto, i;
-    struct protent *protp;
-
-    if (len < PPP_HDRLEN)
-	return 0;
-    proto = PPP_PROTOCOL(p);
-#ifdef PPP_FILTER
-    if (pass_filter.bf_len != 0
-	&& bpf_filter(pass_filter.bf_insns, p, len, len) == 0)
-	return 0;
-    if (active_filter.bf_len != 0
-	&& bpf_filter(active_filter.bf_insns, p, len, len) == 0)
-	return 0;
-#endif
-    for (i = 0; (protp = protocols[i]) != NULL; ++i) {
-	if (protp->protocol < 0xC000 && (protp->protocol & ~0x8000) == proto) {
-	    if (!protp->enabled_flag)
-		return 0;
-	    if (protp->active_pkt == NULL)
-		return 1;
-	    return (*protp->active_pkt)(p, len);
-	}
-    }
-    return 0;			/* not a supported protocol !!?? */
-}
diff --git a/mdk-stage1/ppp/pppd/eui64.c b/mdk-stage1/ppp/pppd/eui64.c
deleted file mode 100644
index 7f3176035..000000000
--- a/mdk-stage1/ppp/pppd/eui64.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-    eui64.c - EUI64 routines for IPv6CP.
-    Copyright (C) 1999  Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms and that any documentation,
-    advertising materials, and other materials related to such
-    distribution and use acknowledge that the software was developed
-    by Tommi Komulainen.  The name of the author may not be used
-    to endorse or promote products derived from this software without
-    specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-
-    $Id$
-*/
-
-#define RCSID	"$Id$"
-
-#include "pppd.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * eui64_ntoa - Make an ascii representation of an interface identifier
- */
-char *
-eui64_ntoa(e)
-    eui64_t e;
-{
-    static char buf[32];
-
-    snprintf(buf, 32, "%02x%02x:%02x%02x:%02x%02x:%02x%02x",
-	     e.e8[0], e.e8[1], e.e8[2], e.e8[3], 
-	     e.e8[4], e.e8[5], e.e8[6], e.e8[7]);
-    return buf;
-}
diff --git a/mdk-stage1/ppp/pppd/eui64.h b/mdk-stage1/ppp/pppd/eui64.h
deleted file mode 100644
index ca4445345..000000000
--- a/mdk-stage1/ppp/pppd/eui64.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
-    eui64.h - EUI64 routines for IPv6CP.
-    Copyright (C) 1999  Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms and that any documentation,
-    advertising materials, and other materials related to such
-    distribution and use acknowledge that the software was developed
-    by Tommi Komulainen.  The name of the author may not be used
-    to endorse or promote products derived from this software without
-    specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-    
-    $Id$
-*/
-
-#ifndef __EUI64_H__
-#define __EUI64_H__
-
-#if !defined(INET6)
-#error	"this file should only be included when INET6 is defined"
-#endif /* not defined(INET6) */
-
-#if defined(SOL2)
-#include <netinet/in.h>
-
-typedef union {
-    uint8_t	e8[8];		/* lower 64-bit IPv6 address */
-    uint32_t	e32[2];		/* lower 64-bit IPv6 address */
-} eui64_t;
-
-/*
- * Declare the two below, since in.h only defines them when _KERNEL
- * is declared - which shouldn't be true when dealing with user-land programs
- */
-#define	s6_addr8	_S6_un._S6_u8
-#define	s6_addr32	_S6_un._S6_u32
-
-#else /* else if not defined(SOL2) */
-
-/*
- * TODO:
- *
- * Maybe this should be done by processing struct in6_addr directly...
- */
-typedef union
-{
-    u_int8_t e8[8];
-    u_int16_t e16[4];
-    u_int32_t e32[2];
-} eui64_t;
-
-#endif /* defined(SOL2) */
-
-#define eui64_iszero(e)		(((e).e32[0] | (e).e32[1]) == 0)
-#define eui64_equals(e, o)	(((e).e32[0] == (o).e32[0]) && \
-				((e).e32[1] == (o).e32[1]))
-#define eui64_zero(e)		(e).e32[0] = (e).e32[1] = 0;
-
-#define eui64_copy(s, d)	memcpy(&(d), &(s), sizeof(eui64_t))
-
-#define eui64_magic(e)		do {			\
-				(e).e32[0] = magic();	\
-				(e).e32[1] = magic();	\
-				(e).e8[0] &= ~2;	\
-				} while (0)
-#define eui64_magic_nz(x)	do {				\
-				eui64_magic(x);			\
-				} while (eui64_iszero(x))
-#define eui64_magic_ne(x, y)	do {				\
-				eui64_magic(x);			\
-				} while (eui64_equals(x, y))
-
-#define eui64_get(ll, cp)	do {				\
-				eui64_copy((*cp), (ll));	\
-				(cp) += sizeof(eui64_t);	\
-				} while (0)
-
-#define eui64_put(ll, cp)	do {				\
-				eui64_copy((ll), (*cp));	\
-				(cp) += sizeof(eui64_t);	\
-				} while (0)
-
-#define eui64_set32(e, l)	do {			\
-				(e).e32[0] = 0;		\
-				(e).e32[1] = htonl(l);	\
-				} while (0)
-#define eui64_setlo32(e, l)	eui64_set32(e, l)
-
-char *eui64_ntoa __P((eui64_t));	/* Returns ascii representation of id */
-
-#endif /* __EUI64_H__ */
-
diff --git a/mdk-stage1/ppp/pppd/fsm.c b/mdk-stage1/ppp/pppd/fsm.c
deleted file mode 100644
index 07a8c11f1..000000000
--- a/mdk-stage1/ppp/pppd/fsm.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
- * fsm.c - {Link, IP} Control Protocol Finite State Machine.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- * Randomize fsm id on link/init.
- * Deal with variable outgoing MTU.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-
-#include "pppd.h"
-#include "fsm.h"
-
-static const char rcsid[] = RCSID;
-
-static void fsm_timeout __P((void *));
-static void fsm_rconfreq __P((fsm *, int, u_char *, int));
-static void fsm_rconfack __P((fsm *, int, u_char *, int));
-static void fsm_rconfnakrej __P((fsm *, int, int, u_char *, int));
-static void fsm_rtermreq __P((fsm *, int, u_char *, int));
-static void fsm_rtermack __P((fsm *));
-static void fsm_rcoderej __P((fsm *, u_char *, int));
-static void fsm_sconfreq __P((fsm *, int));
-
-#define PROTO_NAME(f)	((f)->callbacks->proto_name)
-
-int peer_mru[NUM_PPP];
-
-
-/*
- * fsm_init - Initialize fsm.
- *
- * Initialize fsm state.
- */
-void
-fsm_init(f)
-    fsm *f;
-{
-    f->state = INITIAL;
-    f->flags = 0;
-    f->id = 0;				/* XXX Start with random id? */
-    f->timeouttime = DEFTIMEOUT;
-    f->maxconfreqtransmits = DEFMAXCONFREQS;
-    f->maxtermtransmits = DEFMAXTERMREQS;
-    f->maxnakloops = DEFMAXNAKLOOPS;
-    f->term_reason_len = 0;
-}
-
-
-/*
- * fsm_lowerup - The lower layer is up.
- */
-void
-fsm_lowerup(f)
-    fsm *f;
-{
-    switch( f->state ){
-    case INITIAL:
-	f->state = CLOSED;
-	break;
-
-    case STARTING:
-	if( f->flags & OPT_SILENT )
-	    f->state = STOPPED;
-	else {
-	    /* Send an initial configure-request */
-	    fsm_sconfreq(f, 0);
-	    f->state = REQSENT;
-	}
-	break;
-
-    default:
-	FSMDEBUG(("%s: Up event in state %d!", PROTO_NAME(f), f->state));
-    }
-}
-
-
-/*
- * fsm_lowerdown - The lower layer is down.
- *
- * Cancel all timeouts and inform upper layers.
- */
-void
-fsm_lowerdown(f)
-    fsm *f;
-{
-    switch( f->state ){
-    case CLOSED:
-	f->state = INITIAL;
-	break;
-
-    case STOPPED:
-	f->state = STARTING;
-	if( f->callbacks->starting )
-	    (*f->callbacks->starting)(f);
-	break;
-
-    case CLOSING:
-	f->state = INITIAL;
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	break;
-
-    case STOPPING:
-    case REQSENT:
-    case ACKRCVD:
-    case ACKSENT:
-	f->state = STARTING;
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	break;
-
-    case OPENED:
-	if( f->callbacks->down )
-	    (*f->callbacks->down)(f);
-	f->state = STARTING;
-	break;
-
-    default:
-	FSMDEBUG(("%s: Down event in state %d!", PROTO_NAME(f), f->state));
-    }
-}
-
-
-/*
- * fsm_open - Link is allowed to come up.
- */
-void
-fsm_open(f)
-    fsm *f;
-{
-    switch( f->state ){
-    case INITIAL:
-	f->state = STARTING;
-	if( f->callbacks->starting )
-	    (*f->callbacks->starting)(f);
-	break;
-
-    case CLOSED:
-	if( f->flags & OPT_SILENT )
-	    f->state = STOPPED;
-	else {
-	    /* Send an initial configure-request */
-	    fsm_sconfreq(f, 0);
-	    f->state = REQSENT;
-	}
-	break;
-
-    case CLOSING:
-	f->state = STOPPING;
-	/* fall through */
-    case STOPPED:
-    case OPENED:
-	if( f->flags & OPT_RESTART ){
-	    fsm_lowerdown(f);
-	    fsm_lowerup(f);
-	}
-	break;
-    }
-}
-
-
-/*
- * fsm_close - Start closing connection.
- *
- * Cancel timeouts and either initiate close or possibly go directly to
- * the CLOSED state.
- */
-void
-fsm_close(f, reason)
-    fsm *f;
-    char *reason;
-{
-    f->term_reason = reason;
-    f->term_reason_len = (reason == NULL? 0: strlen(reason));
-    switch( f->state ){
-    case STARTING:
-	f->state = INITIAL;
-	break;
-    case STOPPED:
-	f->state = CLOSED;
-	break;
-    case STOPPING:
-	f->state = CLOSING;
-	break;
-
-    case REQSENT:
-    case ACKRCVD:
-    case ACKSENT:
-    case OPENED:
-	if( f->state != OPENED )
-	    UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	else if( f->callbacks->down )
-	    (*f->callbacks->down)(f);	/* Inform upper layers we're down */
-
-	/* Init restart counter, send Terminate-Request */
-	f->retransmits = f->maxtermtransmits;
-	fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-		  (u_char *) f->term_reason, f->term_reason_len);
-	TIMEOUT(fsm_timeout, f, f->timeouttime);
-	--f->retransmits;
-
-	f->state = CLOSING;
-	break;
-    }
-}
-
-
-/*
- * fsm_timeout - Timeout expired.
- */
-static void
-fsm_timeout(arg)
-    void *arg;
-{
-    fsm *f = (fsm *) arg;
-
-    switch (f->state) {
-    case CLOSING:
-    case STOPPING:
-	if( f->retransmits <= 0 ){
-	    /*
-	     * We've waited for an ack long enough.  Peer probably heard us.
-	     */
-	    f->state = (f->state == CLOSING)? CLOSED: STOPPED;
-	    if( f->callbacks->finished )
-		(*f->callbacks->finished)(f);
-	} else {
-	    /* Send Terminate-Request */
-	    fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-		      (u_char *) f->term_reason, f->term_reason_len);
-	    TIMEOUT(fsm_timeout, f, f->timeouttime);
-	    --f->retransmits;
-	}
-	break;
-
-    case REQSENT:
-    case ACKRCVD:
-    case ACKSENT:
-	if (f->retransmits <= 0) {
-	    warn("%s: timeout sending Config-Requests\n", PROTO_NAME(f));
-	    f->state = STOPPED;
-	    if( (f->flags & OPT_PASSIVE) == 0 && f->callbacks->finished )
-		(*f->callbacks->finished)(f);
-
-	} else {
-	    /* Retransmit the configure-request */
-	    if (f->callbacks->retransmit)
-		(*f->callbacks->retransmit)(f);
-	    fsm_sconfreq(f, 1);		/* Re-send Configure-Request */
-	    if( f->state == ACKRCVD )
-		f->state = REQSENT;
-	}
-	break;
-
-    default:
-	FSMDEBUG(("%s: Timeout event in state %d!", PROTO_NAME(f), f->state));
-    }
-}
-
-
-/*
- * fsm_input - Input packet.
- */
-void
-fsm_input(f, inpacket, l)
-    fsm *f;
-    u_char *inpacket;
-    int l;
-{
-    u_char *inp;
-    u_char code, id;
-    int len;
-
-    /*
-     * Parse header (code, id and length).
-     * If packet too short, drop it.
-     */
-    inp = inpacket;
-    if (l < HEADERLEN) {
-	FSMDEBUG(("fsm_input(%x): Rcvd short header.", f->protocol));
-	return;
-    }
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    GETSHORT(len, inp);
-    if (len < HEADERLEN) {
-	FSMDEBUG(("fsm_input(%x): Rcvd illegal length.", f->protocol));
-	return;
-    }
-    if (len > l) {
-	FSMDEBUG(("fsm_input(%x): Rcvd short packet.", f->protocol));
-	return;
-    }
-    len -= HEADERLEN;		/* subtract header length */
-
-    if( f->state == INITIAL || f->state == STARTING ){
-	FSMDEBUG(("fsm_input(%x): Rcvd packet in state %d.",
-		  f->protocol, f->state));
-	return;
-    }
-
-    /*
-     * Action depends on code.
-     */
-    switch (code) {
-    case CONFREQ:
-	fsm_rconfreq(f, id, inp, len);
-	break;
-    
-    case CONFACK:
-	fsm_rconfack(f, id, inp, len);
-	break;
-    
-    case CONFNAK:
-    case CONFREJ:
-	fsm_rconfnakrej(f, code, id, inp, len);
-	break;
-    
-    case TERMREQ:
-	fsm_rtermreq(f, id, inp, len);
-	break;
-    
-    case TERMACK:
-	fsm_rtermack(f);
-	break;
-    
-    case CODEREJ:
-	fsm_rcoderej(f, inp, len);
-	break;
-    
-    default:
-	if( !f->callbacks->extcode
-	   || !(*f->callbacks->extcode)(f, code, id, inp, len) )
-	    fsm_sdata(f, CODEREJ, ++f->id, inpacket, len + HEADERLEN);
-	break;
-    }
-}
-
-
-/*
- * fsm_rconfreq - Receive Configure-Request.
- */
-static void
-fsm_rconfreq(f, id, inp, len)
-    fsm *f;
-    u_char id;
-    u_char *inp;
-    int len;
-{
-    int code, reject_if_disagree;
-
-    switch( f->state ){
-    case CLOSED:
-	/* Go away, we're closed */
-	fsm_sdata(f, TERMACK, id, NULL, 0);
-	return;
-    case CLOSING:
-    case STOPPING:
-	return;
-
-    case OPENED:
-	/* Go down and restart negotiation */
-	if( f->callbacks->down )
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
-	break;
-
-    case STOPPED:
-	/* Negotiation started by our peer */
-	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
-	f->state = REQSENT;
-	break;
-    }
-
-    /*
-     * Pass the requested configuration options
-     * to protocol-specific code for checking.
-     */
-    if (f->callbacks->reqci){		/* Check CI */
-	reject_if_disagree = (f->nakloops >= f->maxnakloops);
-	code = (*f->callbacks->reqci)(f, inp, &len, reject_if_disagree);
-    } else if (len)
-	code = CONFREJ;			/* Reject all CI */
-    else
-	code = CONFACK;
-
-    /* send the Ack, Nak or Rej to the peer */
-    fsm_sdata(f, code, id, inp, len);
-
-    if (code == CONFACK) {
-	if (f->state == ACKRCVD) {
-	    UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	    f->state = OPENED;
-	    if (f->callbacks->up)
-		(*f->callbacks->up)(f);	/* Inform upper layers */
-	} else
-	    f->state = ACKSENT;
-	f->nakloops = 0;
-
-    } else {
-	/* we sent CONFACK or CONFREJ */
-	if (f->state != ACKRCVD)
-	    f->state = REQSENT;
-	if( code == CONFNAK )
-	    ++f->nakloops;
-    }
-}
-
-
-/*
- * fsm_rconfack - Receive Configure-Ack.
- */
-static void
-fsm_rconfack(f, id, inp, len)
-    fsm *f;
-    int id;
-    u_char *inp;
-    int len;
-{
-    if (id != f->reqid || f->seen_ack)		/* Expected id? */
-	return;					/* Nope, toss... */
-    if( !(f->callbacks->ackci? (*f->callbacks->ackci)(f, inp, len):
-	  (len == 0)) ){
-	/* Ack is bad - ignore it */
-	error("Received bad configure-ack: %P", inp, len);
-	return;
-    }
-    f->seen_ack = 1;
-
-    switch (f->state) {
-    case CLOSED:
-    case STOPPED:
-	fsm_sdata(f, TERMACK, id, NULL, 0);
-	break;
-
-    case REQSENT:
-	f->state = ACKRCVD;
-	f->retransmits = f->maxconfreqtransmits;
-	break;
-
-    case ACKRCVD:
-	/* Huh? an extra valid Ack? oh well... */
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	fsm_sconfreq(f, 0);
-	f->state = REQSENT;
-	break;
-
-    case ACKSENT:
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	f->state = OPENED;
-	f->retransmits = f->maxconfreqtransmits;
-	if (f->callbacks->up)
-	    (*f->callbacks->up)(f);	/* Inform upper layers */
-	break;
-
-    case OPENED:
-	/* Go down and restart negotiation */
-	if (f->callbacks->down)
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
-	f->state = REQSENT;
-	break;
-    }
-}
-
-
-/*
- * fsm_rconfnakrej - Receive Configure-Nak or Configure-Reject.
- */
-static void
-fsm_rconfnakrej(f, code, id, inp, len)
-    fsm *f;
-    int code, id;
-    u_char *inp;
-    int len;
-{
-    int (*proc) __P((fsm *, u_char *, int));
-    int ret;
-
-    if (id != f->reqid || f->seen_ack)	/* Expected id? */
-	return;				/* Nope, toss... */
-    proc = (code == CONFNAK)? f->callbacks->nakci: f->callbacks->rejci;
-    if (!proc || !(ret = proc(f, inp, len))) {
-	/* Nak/reject is bad - ignore it */
-	error("Received bad configure-nak/rej: %P", inp, len);
-	return;
-    }
-    f->seen_ack = 1;
-
-    switch (f->state) {
-    case CLOSED:
-    case STOPPED:
-	fsm_sdata(f, TERMACK, id, NULL, 0);
-	break;
-
-    case REQSENT:
-    case ACKSENT:
-	/* They didn't agree to what we wanted - try another request */
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	if (ret < 0)
-	    f->state = STOPPED;		/* kludge for stopping CCP */
-	else
-	    fsm_sconfreq(f, 0);		/* Send Configure-Request */
-	break;
-
-    case ACKRCVD:
-	/* Got a Nak/reject when we had already had an Ack?? oh well... */
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	fsm_sconfreq(f, 0);
-	f->state = REQSENT;
-	break;
-
-    case OPENED:
-	/* Go down and restart negotiation */
-	if (f->callbacks->down)
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	fsm_sconfreq(f, 0);		/* Send initial Configure-Request */
-	f->state = REQSENT;
-	break;
-    }
-}
-
-
-/*
- * fsm_rtermreq - Receive Terminate-Req.
- */
-static void
-fsm_rtermreq(f, id, p, len)
-    fsm *f;
-    int id;
-    u_char *p;
-    int len;
-{
-    switch (f->state) {
-    case ACKRCVD:
-    case ACKSENT:
-	f->state = REQSENT;		/* Start over but keep trying */
-	break;
-
-    case OPENED:
-	if (len > 0) {
-	    info("%s terminated by peer (%0.*v)", PROTO_NAME(f), len, p);
-	} else
-	    info("%s terminated by peer", PROTO_NAME(f));
-	if (f->callbacks->down)
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	f->retransmits = 0;
-	f->state = STOPPING;
-	TIMEOUT(fsm_timeout, f, f->timeouttime);
-	break;
-    }
-
-    fsm_sdata(f, TERMACK, id, NULL, 0);
-}
-
-
-/*
- * fsm_rtermack - Receive Terminate-Ack.
- */
-static void
-fsm_rtermack(f)
-    fsm *f;
-{
-    switch (f->state) {
-    case CLOSING:
-	UNTIMEOUT(fsm_timeout, f);
-	f->state = CLOSED;
-	if( f->callbacks->finished )
-	    (*f->callbacks->finished)(f);
-	break;
-    case STOPPING:
-	UNTIMEOUT(fsm_timeout, f);
-	f->state = STOPPED;
-	if( f->callbacks->finished )
-	    (*f->callbacks->finished)(f);
-	break;
-
-    case ACKRCVD:
-	f->state = REQSENT;
-	break;
-
-    case OPENED:
-	if (f->callbacks->down)
-	    (*f->callbacks->down)(f);	/* Inform upper layers */
-	fsm_sconfreq(f, 0);
-	break;
-    }
-}
-
-
-/*
- * fsm_rcoderej - Receive an Code-Reject.
- */
-static void
-fsm_rcoderej(f, inp, len)
-    fsm *f;
-    u_char *inp;
-    int len;
-{
-    u_char code, id;
-
-    if (len < HEADERLEN) {
-	FSMDEBUG(("fsm_rcoderej: Rcvd short Code-Reject packet!"));
-	return;
-    }
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    warn("%s: Rcvd Code-Reject for code %d, id %d", PROTO_NAME(f), code, id);
-
-    if( f->state == ACKRCVD )
-	f->state = REQSENT;
-}
-
-
-/*
- * fsm_protreject - Peer doesn't speak this protocol.
- *
- * Treat this as a catastrophic error (RXJ-).
- */
-void
-fsm_protreject(f)
-    fsm *f;
-{
-    switch( f->state ){
-    case CLOSING:
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	/* fall through */
-    case CLOSED:
-	f->state = CLOSED;
-	if( f->callbacks->finished )
-	    (*f->callbacks->finished)(f);
-	break;
-
-    case STOPPING:
-    case REQSENT:
-    case ACKRCVD:
-    case ACKSENT:
-	UNTIMEOUT(fsm_timeout, f);	/* Cancel timeout */
-	/* fall through */
-    case STOPPED:
-	f->state = STOPPED;
-	if( f->callbacks->finished )
-	    (*f->callbacks->finished)(f);
-	break;
-
-    case OPENED:
-	if( f->callbacks->down )
-	    (*f->callbacks->down)(f);
-
-	/* Init restart counter, send Terminate-Request */
-	f->retransmits = f->maxtermtransmits;
-	fsm_sdata(f, TERMREQ, f->reqid = ++f->id,
-		  (u_char *) f->term_reason, f->term_reason_len);
-	TIMEOUT(fsm_timeout, f, f->timeouttime);
-	--f->retransmits;
-
-	f->state = STOPPING;
-	break;
-
-    default:
-	FSMDEBUG(("%s: Protocol-reject event in state %d!",
-		  PROTO_NAME(f), f->state));
-    }
-}
-
-
-/*
- * fsm_sconfreq - Send a Configure-Request.
- */
-static void
-fsm_sconfreq(f, retransmit)
-    fsm *f;
-    int retransmit;
-{
-    u_char *outp;
-    int cilen;
-
-    if( f->state != REQSENT && f->state != ACKRCVD && f->state != ACKSENT ){
-	/* Not currently negotiating - reset options */
-	if( f->callbacks->resetci )
-	    (*f->callbacks->resetci)(f);
-	f->nakloops = 0;
-    }
-
-    if( !retransmit ){
-	/* New request - reset retransmission counter, use new ID */
-	f->retransmits = f->maxconfreqtransmits;
-	f->reqid = ++f->id;
-    }
-
-    f->seen_ack = 0;
-
-    /*
-     * Make up the request packet
-     */
-    outp = outpacket_buf + PPP_HDRLEN + HEADERLEN;
-    if( f->callbacks->cilen && f->callbacks->addci ){
-	cilen = (*f->callbacks->cilen)(f);
-	if( cilen > peer_mru[f->unit] - HEADERLEN )
-	    cilen = peer_mru[f->unit] - HEADERLEN;
-	if (f->callbacks->addci)
-	    (*f->callbacks->addci)(f, outp, &cilen);
-    } else
-	cilen = 0;
-
-    /* send the request to our peer */
-    fsm_sdata(f, CONFREQ, f->reqid, outp, cilen);
-
-    /* start the retransmit timer */
-    --f->retransmits;
-    TIMEOUT(fsm_timeout, f, f->timeouttime);
-}
-
-
-/*
- * fsm_sdata - Send some data.
- *
- * Used for all packets sent to our peer by this module.
- */
-void
-fsm_sdata(f, code, id, data, datalen)
-    fsm *f;
-    u_char code, id;
-    u_char *data;
-    int datalen;
-{
-    u_char *outp;
-    int outlen;
-
-    /* Adjust length to be smaller than MTU */
-    outp = outpacket_buf;
-    if (datalen > peer_mru[f->unit] - HEADERLEN)
-	datalen = peer_mru[f->unit] - HEADERLEN;
-    if (datalen && data != outp + PPP_HDRLEN + HEADERLEN)
-	BCOPY(data, outp + PPP_HDRLEN + HEADERLEN, datalen);
-    outlen = datalen + HEADERLEN;
-    MAKEHEADER(outp, f->protocol);
-    PUTCHAR(code, outp);
-    PUTCHAR(id, outp);
-    PUTSHORT(outlen, outp);
-    output(f->unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
diff --git a/mdk-stage1/ppp/pppd/fsm.h b/mdk-stage1/ppp/pppd/fsm.h
deleted file mode 100644
index c94a68e6c..000000000
--- a/mdk-stage1/ppp/pppd/fsm.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * fsm.h - {Link, IP} Control Protocol Finite State Machine definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Packet header = Code, id, length.
- */
-#define HEADERLEN	4
-
-
-/*
- *  CP (LCP, IPCP, etc.) codes.
- */
-#define CONFREQ		1	/* Configuration Request */
-#define CONFACK		2	/* Configuration Ack */
-#define CONFNAK		3	/* Configuration Nak */
-#define CONFREJ		4	/* Configuration Reject */
-#define TERMREQ		5	/* Termination Request */
-#define TERMACK		6	/* Termination Ack */
-#define CODEREJ		7	/* Code Reject */
-
-
-/*
- * Each FSM is described by an fsm structure and fsm callbacks.
- */
-typedef struct fsm {
-    int unit;			/* Interface unit number */
-    int protocol;		/* Data Link Layer Protocol field value */
-    int state;			/* State */
-    int flags;			/* Contains option bits */
-    u_char id;			/* Current id */
-    u_char reqid;		/* Current request id */
-    u_char seen_ack;		/* Have received valid Ack/Nak/Rej to Req */
-    int timeouttime;		/* Timeout time in milliseconds */
-    int maxconfreqtransmits;	/* Maximum Configure-Request transmissions */
-    int retransmits;		/* Number of retransmissions left */
-    int maxtermtransmits;	/* Maximum Terminate-Request transmissions */
-    int nakloops;		/* Number of nak loops since last ack */
-    int maxnakloops;		/* Maximum number of nak loops tolerated */
-    struct fsm_callbacks *callbacks;	/* Callback routines */
-    char *term_reason;		/* Reason for closing protocol */
-    int term_reason_len;	/* Length of term_reason */
-} fsm;
-
-
-typedef struct fsm_callbacks {
-    void (*resetci)		/* Reset our Configuration Information */
-		__P((fsm *));
-    int  (*cilen)		/* Length of our Configuration Information */
-		__P((fsm *));
-    void (*addci) 		/* Add our Configuration Information */
-		__P((fsm *, u_char *, int *));
-    int  (*ackci)		/* ACK our Configuration Information */
-		__P((fsm *, u_char *, int));
-    int  (*nakci)		/* NAK our Configuration Information */
-		__P((fsm *, u_char *, int));
-    int  (*rejci)		/* Reject our Configuration Information */
-		__P((fsm *, u_char *, int));
-    int  (*reqci)		/* Request peer's Configuration Information */
-		__P((fsm *, u_char *, int *, int));
-    void (*up)			/* Called when fsm reaches OPENED state */
-		__P((fsm *));
-    void (*down)		/* Called when fsm leaves OPENED state */
-		__P((fsm *));
-    void (*starting)		/* Called when we want the lower layer */
-		__P((fsm *));
-    void (*finished)		/* Called when we don't want the lower layer */
-		__P((fsm *));
-    void (*protreject)		/* Called when Protocol-Reject received */
-		__P((int));
-    void (*retransmit)		/* Retransmission is necessary */
-		__P((fsm *));
-    int  (*extcode)		/* Called when unknown code received */
-		__P((fsm *, int, int, u_char *, int));
-    char *proto_name;		/* String name for protocol (for messages) */
-} fsm_callbacks;
-
-
-/*
- * Link states.
- */
-#define INITIAL		0	/* Down, hasn't been opened */
-#define STARTING	1	/* Down, been opened */
-#define CLOSED		2	/* Up, hasn't been opened */
-#define STOPPED		3	/* Open, waiting for down event */
-#define CLOSING		4	/* Terminating the connection, not open */
-#define STOPPING	5	/* Terminating, but open */
-#define REQSENT		6	/* We've sent a Config Request */
-#define ACKRCVD		7	/* We've received a Config Ack */
-#define ACKSENT		8	/* We've sent a Config Ack */
-#define OPENED		9	/* Connection available */
-
-
-/*
- * Flags - indicate options controlling FSM operation
- */
-#define OPT_PASSIVE	1	/* Don't die if we don't get a response */
-#define OPT_RESTART	2	/* Treat 2nd OPEN as DOWN, UP */
-#define OPT_SILENT	4	/* Wait for peer to speak first */
-
-
-/*
- * Timeouts.
- */
-#define DEFTIMEOUT	3	/* Timeout time in seconds */
-#define DEFMAXTERMREQS	2	/* Maximum Terminate-Request transmissions */
-#define DEFMAXCONFREQS	10	/* Maximum Configure-Request transmissions */
-#define DEFMAXNAKLOOPS	5	/* Maximum number of nak loops */
-
-
-/*
- * Prototypes
- */
-void fsm_init __P((fsm *));
-void fsm_lowerup __P((fsm *));
-void fsm_lowerdown __P((fsm *));
-void fsm_open __P((fsm *));
-void fsm_close __P((fsm *, char *));
-void fsm_input __P((fsm *, u_char *, int));
-void fsm_protreject __P((fsm *));
-void fsm_sdata __P((fsm *, int, int, u_char *, int));
-
-
-/*
- * Variables
- */
-extern int peer_mru[];		/* currently negotiated peer MRU (per unit) */
diff --git a/mdk-stage1/ppp/pppd/ipcp.c b/mdk-stage1/ppp/pppd/ipcp.c
deleted file mode 100644
index 3f64357ed..000000000
--- a/mdk-stage1/ppp/pppd/ipcp.c
+++ /dev/null
@@ -1,2054 +0,0 @@
-/*
- * ipcp.c - PPP IP Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "pathnames.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipcp_options ipcp_wantoptions[NUM_PPP];	/* Options that we want to request */
-ipcp_options ipcp_gotoptions[NUM_PPP];	/* Options that peer ack'd */
-ipcp_options ipcp_allowoptions[NUM_PPP]; /* Options we allow peer to request */
-ipcp_options ipcp_hisoptions[NUM_PPP];	/* Options that we ack'd */
-
-u_int32_t netmask = 0;		/* IP netmask to set on interface */
-
-bool	disable_defaultip = 0;	/* Don't use hostname for default IP adrs */
-
-/* Hook for a plugin to know when IP protocol has come up */
-void (*ip_up_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to know when IP protocol has come down */
-void (*ip_down_hook) __P((void)) = NULL;
-
-/* Hook for a plugin to choose the remote IP address */
-void (*ip_choose_hook) __P((u_int32_t *)) = NULL;
-
-/* local vars */
-static int default_route_set[NUM_PPP];	/* Have set up a default route */
-static int proxy_arp_set[NUM_PPP];	/* Have created proxy arp entry */
-static bool usepeerdns;			/* Ask peer for DNS addrs */
-static int ipcp_is_up;			/* have called np_up() */
-static bool ask_for_local;		/* request our address from peer */
-static char vj_value[8];		/* string form of vj option value */
-static char netmask_str[20];		/* string form of netmask value */
-
-/*
- * Callbacks for fsm code.  (CI = Configuration Information)
- */
-static void ipcp_resetci __P((fsm *));	/* Reset our CI */
-static int  ipcp_cilen __P((fsm *));	        /* Return length of our CI */
-static void ipcp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int  ipcp_ackci __P((fsm *, u_char *, int));	/* Peer ack'd our CI */
-static int  ipcp_nakci __P((fsm *, u_char *, int));	/* Peer nak'd our CI */
-static int  ipcp_rejci __P((fsm *, u_char *, int));	/* Peer rej'd our CI */
-static int  ipcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipcp_up __P((fsm *));		/* We're UP */
-static void ipcp_down __P((fsm *));		/* We're DOWN */
-static void ipcp_finished __P((fsm *));	/* Don't need lower layer */
-
-fsm ipcp_fsm[NUM_PPP];		/* IPCP fsm structure */
-
-static fsm_callbacks ipcp_callbacks = { /* IPCP callback routines */
-    ipcp_resetci,		/* Reset our Configuration Information */
-    ipcp_cilen,			/* Length of our Configuration Information */
-    ipcp_addci,			/* Add our Configuration Information */
-    ipcp_ackci,			/* ACK our Configuration Information */
-    ipcp_nakci,			/* NAK our Configuration Information */
-    ipcp_rejci,			/* Reject our Configuration Information */
-    ipcp_reqci,			/* Request peer's Configuration Information */
-    ipcp_up,			/* Called when fsm reaches OPENED state */
-    ipcp_down,			/* Called when fsm leaves OPENED state */
-    NULL,			/* Called when we want the lower layer up */
-    ipcp_finished,		/* Called when we want the lower layer down */
-    NULL,			/* Called when Protocol-Reject received */
-    NULL,			/* Retransmission is necessary */
-    NULL,			/* Called to handle protocol-specific codes */
-    "IPCP"			/* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setvjslots __P((char **));
-static int setdnsaddr __P((char **));
-static int setwinsaddr __P((char **));
-static int setnetmask __P((char **));
-static int setipaddr __P((char *, char **, int));
-static void printipaddr __P((option_t *, void (*)(void *, char *,...),void *));
-
-static option_t ipcp_option_list[] = {
-    { "noip", o_bool, &ipcp_protent.enabled_flag,
-      "Disable IP and IPCP" },
-    { "-ip", o_bool, &ipcp_protent.enabled_flag,
-      "Disable IP and IPCP", OPT_ALIAS },
-
-    { "novj", o_bool, &ipcp_wantoptions[0].neg_vj,
-      "Disable VJ compression", OPT_A2CLR, &ipcp_allowoptions[0].neg_vj },
-    { "-vj", o_bool, &ipcp_wantoptions[0].neg_vj,
-      "Disable VJ compression", OPT_ALIAS | OPT_A2CLR,
-      &ipcp_allowoptions[0].neg_vj },
-
-    { "novjccomp", o_bool, &ipcp_wantoptions[0].cflag,
-      "Disable VJ connection-ID compression", OPT_A2CLR,
-      &ipcp_allowoptions[0].cflag },
-    { "-vjccomp", o_bool, &ipcp_wantoptions[0].cflag,
-      "Disable VJ connection-ID compression", OPT_ALIAS | OPT_A2CLR,
-      &ipcp_allowoptions[0].cflag },
-
-    { "vj-max-slots", o_special, (void *)setvjslots,
-      "Set maximum VJ header slots",
-      OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, vj_value },
-
-    { "ipcp-accept-local", o_bool, &ipcp_wantoptions[0].accept_local,
-      "Accept peer's address for us", 1 },
-    { "ipcp-accept-remote", o_bool, &ipcp_wantoptions[0].accept_remote,
-      "Accept peer's address for it", 1 },
-
-    { "ipparam", o_string, &ipparam,
-      "Set ip script parameter", OPT_PRIO },
-
-    { "noipdefault", o_bool, &disable_defaultip,
-      "Don't use name for default IP adrs", 1 },
-
-    { "ms-dns", 1, (void *)setdnsaddr,
-      "DNS address for the peer's use" },
-    { "ms-wins", 1, (void *)setwinsaddr,
-      "Nameserver for SMB over TCP/IP for peer" },
-
-    { "ipcp-restart", o_int, &ipcp_fsm[0].timeouttime,
-      "Set timeout for IPCP", OPT_PRIO },
-    { "ipcp-max-terminate", o_int, &ipcp_fsm[0].maxtermtransmits,
-      "Set max #xmits for term-reqs", OPT_PRIO },
-    { "ipcp-max-configure", o_int, &ipcp_fsm[0].maxconfreqtransmits,
-      "Set max #xmits for conf-reqs", OPT_PRIO },
-    { "ipcp-max-failure", o_int, &ipcp_fsm[0].maxnakloops,
-      "Set max #conf-naks for IPCP", OPT_PRIO },
-
-    { "defaultroute", o_bool, &ipcp_wantoptions[0].default_route,
-      "Add default route", OPT_ENABLE|1, &ipcp_allowoptions[0].default_route },
-    { "nodefaultroute", o_bool, &ipcp_allowoptions[0].default_route,
-      "disable defaultroute option", OPT_A2CLR,
-      &ipcp_wantoptions[0].default_route },
-    { "-defaultroute", o_bool, &ipcp_allowoptions[0].default_route,
-      "disable defaultroute option", OPT_ALIAS | OPT_A2CLR,
-      &ipcp_wantoptions[0].default_route },
-
-    { "proxyarp", o_bool, &ipcp_wantoptions[0].proxy_arp,
-      "Add proxy ARP entry", OPT_ENABLE|1, &ipcp_allowoptions[0].proxy_arp },
-    { "noproxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
-      "disable proxyarp option", OPT_A2CLR,
-      &ipcp_wantoptions[0].proxy_arp },
-    { "-proxyarp", o_bool, &ipcp_allowoptions[0].proxy_arp,
-      "disable proxyarp option", OPT_ALIAS | OPT_A2CLR,
-      &ipcp_wantoptions[0].proxy_arp },
-
-    { "usepeerdns", o_bool, &usepeerdns,
-      "Ask peer for DNS address(es)", 1 },
-
-    { "netmask", o_special, (void *)setnetmask,
-      "set netmask", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, netmask_str },
-
-    { "IP addresses", o_wild, (void *) &setipaddr,
-      "set local and remote IP addresses",
-      OPT_NOARG | OPT_A2PRINTER, (void *) &printipaddr },
-
-    { NULL }
-};
-
-/*
- * Protocol entry points from main code.
- */
-static void ipcp_init __P((int));
-static void ipcp_open __P((int));
-static void ipcp_close __P((int, char *));
-static void ipcp_lowerup __P((int));
-static void ipcp_lowerdown __P((int));
-static void ipcp_input __P((int, u_char *, int));
-static void ipcp_protrej __P((int));
-static int  ipcp_printpkt __P((u_char *, int,
-			       void (*) __P((void *, char *, ...)), void *));
-static void ip_check_options __P((void));
-static int  ip_demand_conf __P((int));
-static int  ip_active_pkt __P((u_char *, int));
-static void create_resolv __P((u_int32_t, u_int32_t));
-
-struct protent ipcp_protent = {
-    PPP_IPCP,
-    ipcp_init,
-    ipcp_input,
-    ipcp_protrej,
-    ipcp_lowerup,
-    ipcp_lowerdown,
-    ipcp_open,
-    ipcp_close,
-    ipcp_printpkt,
-    NULL,
-    1,
-    "IPCP",
-    "IP",
-    ipcp_option_list,
-    ip_check_options,
-    ip_demand_conf,
-    ip_active_pkt
-};
-
-static void ipcp_clear_addrs __P((int, u_int32_t, u_int32_t));
-static void ipcp_script __P((char *));		/* Run an up/down script */
-static void ipcp_script_done __P((void *));
-
-/*
- * Lengths of configuration options.
- */
-#define CILEN_VOID	2
-#define CILEN_COMPRESS	4	/* min length for compression protocol opt. */
-#define CILEN_VJ	6	/* length for RFC1332 Van-Jacobson opt. */
-#define CILEN_ADDR	6	/* new-style single address option */
-#define CILEN_ADDRS	10	/* old-style dual address option */
-
-
-#define CODENAME(x)	((x) == CONFACK ? "ACK" : \
-			 (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * This state variable is used to ensure that we don't
- * run an ipcp-up/down script while one is already running.
- */
-static enum script_state {
-    s_down,
-    s_up,
-} ipcp_script_state;
-static pid_t ipcp_script_pid;
-
-/*
- * Make a string representation of a network IP address.
- */
-char *
-ip_ntoa(ipaddr)
-u_int32_t ipaddr;
-{
-    static char b[64];
-
-    slprintf(b, sizeof(b), "%I", ipaddr);
-    return b;
-}
-
-/*
- * Option parsing.
- */
-
-/*
- * setvjslots - set maximum number of connection slots for VJ compression
- */
-static int
-setvjslots(argv)
-    char **argv;
-{
-    int value;
-
-    if (!int_option(*argv, &value))
-	return 0;
-    if (value < 2 || value > 16) {
-	option_error("vj-max-slots value must be between 2 and 16");
-	return 0;
-    }
-    ipcp_wantoptions [0].maxslotindex =
-        ipcp_allowoptions[0].maxslotindex = value - 1;
-    slprintf(vj_value, sizeof(vj_value), "%d", value);
-    return 1;
-}
-
-/*
- * setdnsaddr - set the dns address(es)
- */
-static int
-setdnsaddr(argv)
-    char **argv;
-{
-    u_int32_t dns;
-    struct hostent *hp;
-
-    dns = inet_addr(*argv);
-    if (dns == (u_int32_t) -1) {
-	if ((hp = gethostbyname(*argv)) == NULL) {
-	    option_error("invalid address parameter '%s' for ms-dns option",
-			 *argv);
-	    return 0;
-	}
-	dns = *(u_int32_t *)hp->h_addr;
-    }
-
-    /* We take the last 2 values given, the 2nd-last as the primary
-       and the last as the secondary.  If only one is given it
-       becomes both primary and secondary. */
-    if (ipcp_allowoptions[0].dnsaddr[1] == 0)
-	ipcp_allowoptions[0].dnsaddr[0] = dns;
-    else
-	ipcp_allowoptions[0].dnsaddr[0] = ipcp_allowoptions[0].dnsaddr[1];
-
-    /* always set the secondary address value. */
-    ipcp_allowoptions[0].dnsaddr[1] = dns;
-
-    return (1);
-}
-
-/*
- * setwinsaddr - set the wins address(es)
- * This is primrarly used with the Samba package under UNIX or for pointing
- * the caller to the existing WINS server on a Windows NT platform.
- */
-static int
-setwinsaddr(argv)
-    char **argv;
-{
-    u_int32_t wins;
-    struct hostent *hp;
-
-    wins = inet_addr(*argv);
-    if (wins == (u_int32_t) -1) {
-	if ((hp = gethostbyname(*argv)) == NULL) {
-	    option_error("invalid address parameter '%s' for ms-wins option",
-			 *argv);
-	    return 0;
-	}
-	wins = *(u_int32_t *)hp->h_addr;
-    }
-
-    /* We take the last 2 values given, the 2nd-last as the primary
-       and the last as the secondary.  If only one is given it
-       becomes both primary and secondary. */
-    if (ipcp_allowoptions[0].winsaddr[1] == 0)
-	ipcp_allowoptions[0].winsaddr[0] = wins;
-    else
-	ipcp_allowoptions[0].winsaddr[0] = ipcp_allowoptions[0].winsaddr[1];
-
-    /* always set the secondary address value. */
-    ipcp_allowoptions[0].winsaddr[1] = wins;
-
-    return (1);
-}
-
-/*
- * setipaddr - Set the IP address
- * If doit is 0, the call is to check whether this option is
- * potentially an IP address specification.
- */
-static int
-setipaddr(arg, argv, doit)
-    char *arg;
-    char **argv;
-    int doit;
-{
-    struct hostent *hp;
-    char *colon;
-    u_int32_t local, remote;
-    ipcp_options *wo = &ipcp_wantoptions[0];
-    static int prio_local = 0, prio_remote = 0;
-
-    /*
-     * IP address pair separated by ":".
-     */
-    if ((colon = strchr(arg, ':')) == NULL)
-	return 0;
-    if (!doit)
-	return 1;
-  
-    /*
-     * If colon first character, then no local addr.
-     */
-    if (colon != arg && option_priority >= prio_local) {
-	*colon = '\0';
-	if ((local = inet_addr(arg)) == (u_int32_t) -1) {
-	    if ((hp = gethostbyname(arg)) == NULL) {
-		option_error("unknown host: %s", arg);
-		return 0;
-	    }
-	    local = *(u_int32_t *)hp->h_addr;
-	}
-	if (bad_ip_adrs(local)) {
-	    option_error("bad local IP address %s", ip_ntoa(local));
-	    return 0;
-	}
-	if (local != 0)
-	    wo->ouraddr = local;
-	*colon = ':';
-	prio_local = option_priority;
-    }
-  
-    /*
-     * If colon last character, then no remote addr.
-     */
-    if (*++colon != '\0' && option_priority >= prio_remote) {
-	if ((remote = inet_addr(colon)) == (u_int32_t) -1) {
-	    if ((hp = gethostbyname(colon)) == NULL) {
-		option_error("unknown host: %s", colon);
-		return 0;
-	    }
-	    remote = *(u_int32_t *)hp->h_addr;
-	    if (remote_name[0] == 0)
-		strlcpy(remote_name, colon, sizeof(remote_name));
-	}
-	if (bad_ip_adrs(remote)) {
-	    option_error("bad remote IP address %s", ip_ntoa(remote));
-	    return 0;
-	}
-	if (remote != 0)
-	    wo->hisaddr = remote;
-	prio_remote = option_priority;
-    }
-
-    return 1;
-}
-
-static void
-printipaddr(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	ipcp_options *wo = &ipcp_wantoptions[0];
-
-	if (wo->ouraddr != 0)
-		printer(arg, "%I", wo->ouraddr);
-	printer(arg, ":");
-	if (wo->hisaddr != 0)
-		printer(arg, "%I", wo->hisaddr);
-}
-
-/*
- * setnetmask - set the netmask to be used on the interface.
- */
-static int
-setnetmask(argv)
-    char **argv;
-{
-    u_int32_t mask;
-    int n;
-    char *p;
-
-    /*
-     * Unfortunately, if we use inet_addr, we can't tell whether
-     * a result of all 1s is an error or a valid 255.255.255.255.
-     */
-    p = *argv;
-    n = parse_dotted_ip(p, &mask);
-
-    mask = htonl(mask);
-
-    if (n == 0 || p[n] != 0 || (netmask & ~mask) != 0) {
-	option_error("invalid netmask value '%s'", *argv);
-	return 0;
-    }
-
-    netmask = mask;
-    slprintf(netmask_str, sizeof(netmask_str), "%I", mask);
-
-    return (1);
-}
-
-int
-parse_dotted_ip(p, vp)
-    char *p;
-    u_int32_t *vp;
-{
-    int n;
-    u_int32_t v, b;
-    char *endp, *p0 = p;
-
-    v = 0;
-    for (n = 3;; --n) {
-	b = strtoul(p, &endp, 0);
-	if (endp == p)
-	    return 0;
-	if (b > 255) {
-	    if (n < 3)
-		return 0;
-	    /* accept e.g. 0xffffff00 */
-	    *vp = b;
-	    return endp - p0;
-	}
-	v |= b << (n * 8);
-	p = endp;
-	if (n == 0)
-	    break;
-	if (*p != '.')
-	    return 0;
-	++p;
-    }
-    *vp = v;
-    return p - p0;
-}
-
-
-/*
- * ipcp_init - Initialize IPCP.
- */
-static void
-ipcp_init(unit)
-    int unit;
-{
-    fsm *f = &ipcp_fsm[unit];
-    ipcp_options *wo = &ipcp_wantoptions[unit];
-    ipcp_options *ao = &ipcp_allowoptions[unit];
-
-    f->unit = unit;
-    f->protocol = PPP_IPCP;
-    f->callbacks = &ipcp_callbacks;
-    fsm_init(&ipcp_fsm[unit]);
-
-    memset(wo, 0, sizeof(*wo));
-    memset(ao, 0, sizeof(*ao));
-
-    wo->neg_addr = 1;
-    wo->neg_vj = 1;
-    wo->vj_protocol = IPCP_VJ_COMP;
-    wo->maxslotindex = MAX_STATES - 1; /* really max index */
-    wo->cflag = 1;
-
-
-    /* max slots and slot-id compression are currently hardwired in */
-    /* ppp_if.c to 16 and 1, this needs to be changed (among other */
-    /* things) gmc */
-
-    ao->neg_addr = 1;
-    ao->neg_vj = 1;
-    ao->maxslotindex = MAX_STATES - 1;
-    ao->cflag = 1;
-
-    /*
-     * XXX These control whether the user may use the proxyarp
-     * and defaultroute options.
-     */
-    ao->proxy_arp = 1;
-    ao->default_route = 1;
-}
-
-
-/*
- * ipcp_open - IPCP is allowed to come up.
- */
-static void
-ipcp_open(unit)
-    int unit;
-{
-    fsm_open(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_close - Take IPCP down.
- */
-static void
-ipcp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    fsm_close(&ipcp_fsm[unit], reason);
-}
-
-
-/*
- * ipcp_lowerup - The lower layer is up.
- */
-static void
-ipcp_lowerup(unit)
-    int unit;
-{
-    fsm_lowerup(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_lowerdown - The lower layer is down.
- */
-static void
-ipcp_lowerdown(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_input - Input IPCP packet.
- */
-static void
-ipcp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm_input(&ipcp_fsm[unit], p, len);
-}
-
-
-/*
- * ipcp_protrej - A Protocol-Reject was received for IPCP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipcp_protrej(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipcp_fsm[unit]);
-}
-
-
-/*
- * ipcp_resetci - Reset our CI.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static void
-ipcp_resetci(f)
-    fsm *f;
-{
-    ipcp_options *wo = &ipcp_wantoptions[f->unit];
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-
-    wo->req_addr = wo->neg_addr && ipcp_allowoptions[f->unit].neg_addr;
-    if (wo->ouraddr == 0)
-	wo->accept_local = 1;
-    if (wo->hisaddr == 0)
-	wo->accept_remote = 1;
-    wo->req_dns1 = usepeerdns;	/* Request DNS addresses from the peer */
-    wo->req_dns2 = usepeerdns;
-    *go = *wo;
-    if (!ask_for_local)
-	go->ouraddr = 0;
-    if (ip_choose_hook)
-	ip_choose_hook(&wo->hisaddr);
-}
-
-
-/*
- * ipcp_cilen - Return length of our CI.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static int
-ipcp_cilen(f)
-    fsm *f;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    ipcp_options *wo = &ipcp_wantoptions[f->unit];
-    ipcp_options *ho = &ipcp_hisoptions[f->unit];
-
-#define LENCIVJ(neg, old)	(neg ? (old? CILEN_COMPRESS : CILEN_VJ) : 0)
-#define LENCIADDR(neg, old)	(neg ? (old? CILEN_ADDRS : CILEN_ADDR) : 0)
-#define LENCIDNS(neg)		(neg ? (CILEN_ADDR) : 0)
-
-    /*
-     * First see if we want to change our options to the old
-     * forms because we have received old forms from the peer.
-     */
-    if (wo->neg_addr && !go->neg_addr && !go->old_addrs) {
-	/* use the old style of address negotiation */
-	go->neg_addr = 1;
-	go->old_addrs = 1;
-    }
-    if (wo->neg_vj && !go->neg_vj && !go->old_vj) {
-	/* try an older style of VJ negotiation */
-	/* use the old style only if the peer did */
-	if (ho->neg_vj && ho->old_vj) {
-	    go->neg_vj = 1;
-	    go->old_vj = 1;
-	    go->vj_protocol = ho->vj_protocol;
-	}
-    }
-
-    return (LENCIADDR(go->neg_addr, go->old_addrs) +
-	    LENCIVJ(go->neg_vj, go->old_vj) +
-	    LENCIDNS(go->req_dns1) +
-	    LENCIDNS(go->req_dns2)) ;
-}
-
-
-/*
- * ipcp_addci - Add our desired CIs to a packet.
- * Called by fsm_sconfreq, Send Configure Request.
- */
-static void
-ipcp_addci(f, ucp, lenp)
-    fsm *f;
-    u_char *ucp;
-    int *lenp;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    int len = *lenp;
-
-#define ADDCIVJ(opt, neg, val, old, maxslotindex, cflag) \
-    if (neg) { \
-	int vjlen = old? CILEN_COMPRESS : CILEN_VJ; \
-	if (len >= vjlen) { \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(vjlen, ucp); \
-	    PUTSHORT(val, ucp); \
-	    if (!old) { \
-		PUTCHAR(maxslotindex, ucp); \
-		PUTCHAR(cflag, ucp); \
-	    } \
-	    len -= vjlen; \
-	} else \
-	    neg = 0; \
-    }
-
-#define ADDCIADDR(opt, neg, old, val1, val2) \
-    if (neg) { \
-	int addrlen = (old? CILEN_ADDRS: CILEN_ADDR); \
-	if (len >= addrlen) { \
-	    u_int32_t l; \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(addrlen, ucp); \
-	    l = ntohl(val1); \
-	    PUTLONG(l, ucp); \
-	    if (old) { \
-		l = ntohl(val2); \
-		PUTLONG(l, ucp); \
-	    } \
-	    len -= addrlen; \
-	} else \
-	    neg = 0; \
-    }
-
-#define ADDCIDNS(opt, neg, addr) \
-    if (neg) { \
-	if (len >= CILEN_ADDR) { \
-	    u_int32_t l; \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(CILEN_ADDR, ucp); \
-	    l = ntohl(addr); \
-	    PUTLONG(l, ucp); \
-	    len -= CILEN_ADDR; \
-	} else \
-	    neg = 0; \
-    }
-
-    ADDCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), go->neg_addr,
-	      go->old_addrs, go->ouraddr, go->hisaddr);
-
-    ADDCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol, go->old_vj,
-	    go->maxslotindex, go->cflag);
-
-    ADDCIDNS(CI_MS_DNS1, go->req_dns1, go->dnsaddr[0]);
-
-    ADDCIDNS(CI_MS_DNS2, go->req_dns2, go->dnsaddr[1]);
-
-    *lenp -= len;
-}
-
-
-/*
- * ipcp_ackci - Ack our CIs.
- * Called by fsm_rconfack, Receive Configure ACK.
- *
- * Returns:
- *	0 - Ack was bad.
- *	1 - Ack was good.
- */
-static int
-ipcp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    u_short cilen, citype, cishort;
-    u_int32_t cilong;
-    u_char cimaxslotindex, cicflag;
-
-    /*
-     * CIs must be in exactly the same order that we sent...
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-
-#define ACKCIVJ(opt, neg, val, old, maxslotindex, cflag) \
-    if (neg) { \
-	int vjlen = old? CILEN_COMPRESS : CILEN_VJ; \
-	if ((len -= vjlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != vjlen || \
-	    citype != opt)  \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != val) \
-	    goto bad; \
-	if (!old) { \
-	    GETCHAR(cimaxslotindex, p); \
-	    if (cimaxslotindex != maxslotindex) \
-		goto bad; \
-	    GETCHAR(cicflag, p); \
-	    if (cicflag != cflag) \
-		goto bad; \
-	} \
-    }
-
-#define ACKCIADDR(opt, neg, old, val1, val2) \
-    if (neg) { \
-	int addrlen = (old? CILEN_ADDRS: CILEN_ADDR); \
-	u_int32_t l; \
-	if ((len -= addrlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != addrlen || \
-	    citype != opt) \
-	    goto bad; \
-	GETLONG(l, p); \
-	cilong = htonl(l); \
-	if (val1 != cilong) \
-	    goto bad; \
-	if (old) { \
-	    GETLONG(l, p); \
-	    cilong = htonl(l); \
-	    if (val2 != cilong) \
-		goto bad; \
-	} \
-    }
-
-#define ACKCIDNS(opt, neg, addr) \
-    if (neg) { \
-	u_int32_t l; \
-	if ((len -= CILEN_ADDR) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_ADDR || citype != opt) \
-	    goto bad; \
-	GETLONG(l, p); \
-	cilong = htonl(l); \
-	if (addr != cilong) \
-	    goto bad; \
-    }
-
-    ACKCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), go->neg_addr,
-	      go->old_addrs, go->ouraddr, go->hisaddr);
-
-    ACKCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol, go->old_vj,
-	    go->maxslotindex, go->cflag);
-
-    ACKCIDNS(CI_MS_DNS1, go->req_dns1, go->dnsaddr[0]);
-
-    ACKCIDNS(CI_MS_DNS2, go->req_dns2, go->dnsaddr[1]);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    return (1);
-
-bad:
-    IPCPDEBUG(("ipcp_ackci: received bad Ack!"));
-    return (0);
-}
-
-/*
- * ipcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPCP is in the OPENED state.
- * Calback from fsm_rconfnakrej - Receive Configure-Nak or Configure-Reject.
- *
- * Returns:
- *	0 - Nak was bad.
- *	1 - Nak was good.
- */
-static int
-ipcp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    u_char cimaxslotindex, cicflag;
-    u_char citype, cilen, *next;
-    u_short cishort;
-    u_int32_t ciaddr1, ciaddr2, l, cidnsaddr;
-    ipcp_options no;		/* options we've seen Naks for */
-    ipcp_options try;		/* options to request next time */
-
-    BZERO(&no, sizeof(no));
-    try = *go;
-
-    /*
-     * Any Nak'd CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define NAKCIADDR(opt, neg, old, code) \
-    if (go->neg && \
-	len >= (cilen = (old? CILEN_ADDRS: CILEN_ADDR)) && \
-	p[1] == cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETLONG(l, p); \
-	ciaddr1 = htonl(l); \
-	if (old) { \
-	    GETLONG(l, p); \
-	    ciaddr2 = htonl(l); \
-	    no.old_addrs = 1; \
-	} else \
-	    ciaddr2 = 0; \
-	no.neg = 1; \
-	code \
-    }
-
-#define NAKCIVJ(opt, neg, code) \
-    if (go->neg && \
-	((cilen = p[1]) == CILEN_COMPRESS || cilen == CILEN_VJ) && \
-	len >= cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	no.neg = 1; \
-        code \
-    }
-
-#define NAKCIDNS(opt, neg, code) \
-    if (go->neg && \
-	((cilen = p[1]) == CILEN_ADDR) && \
-	len >= cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETLONG(l, p); \
-	cidnsaddr = htonl(l); \
-	no.neg = 1; \
-	code \
-    }
-
-    /*
-     * Accept the peer's idea of {our,his} address, if different
-     * from our idea, only if the accept_{local,remote} flag is set.
-     */
-    NAKCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), neg_addr, go->old_addrs,
-	      if (go->accept_local && ciaddr1) { /* Do we know our address? */
-		  try.ouraddr = ciaddr1;
-	      }
-	      if (go->accept_remote && ciaddr2) { /* Does he know his? */
-		  try.hisaddr = ciaddr2;
-	      }
-	      );
-
-    /*
-     * Accept the peer's value of maxslotindex provided that it
-     * is less than what we asked for.  Turn off slot-ID compression
-     * if the peer wants.  Send old-style compress-type option if
-     * the peer wants.
-     */
-    NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
-	    if (cilen == CILEN_VJ) {
-		GETCHAR(cimaxslotindex, p);
-		GETCHAR(cicflag, p);
-		if (cishort == IPCP_VJ_COMP) {
-		    try.old_vj = 0;
-		    if (cimaxslotindex < go->maxslotindex)
-			try.maxslotindex = cimaxslotindex;
-		    if (!cicflag)
-			try.cflag = 0;
-		} else {
-		    try.neg_vj = 0;
-		}
-	    } else {
-		if (cishort == IPCP_VJ_COMP || cishort == IPCP_VJ_COMP_OLD) {
-		    try.old_vj = 1;
-		    try.vj_protocol = cishort;
-		} else {
-		    try.neg_vj = 0;
-		}
-	    }
-	    );
-
-    NAKCIDNS(CI_MS_DNS1, req_dns1,
-	    try.dnsaddr[0] = cidnsaddr;
-	    );
-
-    NAKCIDNS(CI_MS_DNS2, req_dns2,
-	    try.dnsaddr[1] = cidnsaddr;
-	    );
-
-    /*
-     * There may be remaining CIs, if the peer is requesting negotiation
-     * on an option that we didn't include in our request packet.
-     * If they want to negotiate about IP addresses, we comply.
-     * If they want us to ask for compression, we refuse.
-     */
-    while (len > CILEN_VOID) {
-	GETCHAR(citype, p);
-	GETCHAR(cilen, p);
-	if( (len -= cilen) < 0 )
-	    goto bad;
-	next = p + cilen - 2;
-
-	switch (citype) {
-	case CI_COMPRESSTYPE:
-	    if (go->neg_vj || no.neg_vj ||
-		(cilen != CILEN_VJ && cilen != CILEN_COMPRESS))
-		goto bad;
-	    no.neg_vj = 1;
-	    break;
-	case CI_ADDRS:
-	    if ((go->neg_addr && go->old_addrs) || no.old_addrs
-		|| cilen != CILEN_ADDRS)
-		goto bad;
-	    try.neg_addr = 1;
-	    try.old_addrs = 1;
-	    GETLONG(l, p);
-	    ciaddr1 = htonl(l);
-	    if (ciaddr1 && go->accept_local)
-		try.ouraddr = ciaddr1;
-	    GETLONG(l, p);
-	    ciaddr2 = htonl(l);
-	    if (ciaddr2 && go->accept_remote)
-		try.hisaddr = ciaddr2;
-	    no.old_addrs = 1;
-	    break;
-	case CI_ADDR:
-	    if (go->neg_addr || no.neg_addr || cilen != CILEN_ADDR)
-		goto bad;
-	    try.old_addrs = 0;
-	    GETLONG(l, p);
-	    ciaddr1 = htonl(l);
-	    if (ciaddr1 && go->accept_local)
-		try.ouraddr = ciaddr1;
-	    if (try.ouraddr != 0)
-		try.neg_addr = 1;
-	    no.neg_addr = 1;
-	    break;
-	}
-	p = next;
-    }
-
-    /*
-     * OK, the Nak is good.  Now we can update state.
-     * If there are any remaining options, we ignore them.
-     */
-    if (f->state != OPENED)
-	*go = try;
-
-    return 1;
-
-bad:
-    IPCPDEBUG(("ipcp_nakci: received bad Nak!"));
-    return 0;
-}
-
-
-/*
- * ipcp_rejci - Reject some of our CIs.
- * Callback from fsm_rconfnakrej.
- */
-static int
-ipcp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    u_char cimaxslotindex, ciflag, cilen;
-    u_short cishort;
-    u_int32_t cilong;
-    ipcp_options try;		/* options to request next time */
-
-    try = *go;
-    /*
-     * Any Rejected CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define REJCIADDR(opt, neg, old, val1, val2) \
-    if (go->neg && \
-	len >= (cilen = old? CILEN_ADDRS: CILEN_ADDR) && \
-	p[1] == cilen && \
-	p[0] == opt) { \
-	u_int32_t l; \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETLONG(l, p); \
-	cilong = htonl(l); \
-	/* Check rejected value. */ \
-	if (cilong != val1) \
-	    goto bad; \
-	if (old) { \
-	    GETLONG(l, p); \
-	    cilong = htonl(l); \
-	    /* Check rejected value. */ \
-	    if (cilong != val2) \
-		goto bad; \
-	} \
-	try.neg = 0; \
-    }
-
-#define REJCIVJ(opt, neg, val, old, maxslot, cflag) \
-    if (go->neg && \
-	p[1] == (old? CILEN_COMPRESS : CILEN_VJ) && \
-	len >= p[1] && \
-	p[0] == opt) { \
-	len -= p[1]; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	/* Check rejected value. */  \
-	if (cishort != val) \
-	    goto bad; \
-	if (!old) { \
-	   GETCHAR(cimaxslotindex, p); \
-	   if (cimaxslotindex != maxslot) \
-	     goto bad; \
-	   GETCHAR(ciflag, p); \
-	   if (ciflag != cflag) \
-	     goto bad; \
-        } \
-	try.neg = 0; \
-     }
-
-#define REJCIDNS(opt, neg, dnsaddr) \
-    if (go->neg && \
-	((cilen = p[1]) == CILEN_ADDR) && \
-	len >= cilen && \
-	p[0] == opt) { \
-	u_int32_t l; \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETLONG(l, p); \
-	cilong = htonl(l); \
-	/* Check rejected value. */ \
-	if (cilong != dnsaddr) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-
-
-    REJCIADDR((go->old_addrs? CI_ADDRS: CI_ADDR), neg_addr,
-	      go->old_addrs, go->ouraddr, go->hisaddr);
-
-    REJCIVJ(CI_COMPRESSTYPE, neg_vj, go->vj_protocol, go->old_vj,
-	    go->maxslotindex, go->cflag);
-
-    REJCIDNS(CI_MS_DNS1, req_dns1, go->dnsaddr[0]);
-
-    REJCIDNS(CI_MS_DNS2, req_dns2, go->dnsaddr[1]);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    /*
-     * Now we can update state.
-     */
-    if (f->state != OPENED)
-	*go = try;
-    return 1;
-
-bad:
-    IPCPDEBUG(("ipcp_rejci: received bad Reject!"));
-    return 0;
-}
-
-
-/*
- * ipcp_reqci - Check the peer's requested CIs and send appropriate response.
- * Callback from fsm_rconfreq, Receive Configure Request
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately.  If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipcp_reqci(f, inp, len, reject_if_disagree)
-    fsm *f;
-    u_char *inp;		/* Requested CIs */
-    int *len;			/* Length of requested CIs */
-    int reject_if_disagree;
-{
-    ipcp_options *wo = &ipcp_wantoptions[f->unit];
-    ipcp_options *ho = &ipcp_hisoptions[f->unit];
-    ipcp_options *ao = &ipcp_allowoptions[f->unit];
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    u_char *cip, *next;		/* Pointer to current and next CIs */
-    u_short cilen, citype;	/* Parsed len, type */
-    u_short cishort;		/* Parsed short value */
-    u_int32_t tl, ciaddr1, ciaddr2;/* Parsed address values */
-    int rc = CONFACK;		/* Final packet return code */
-    int orc;			/* Individual option return code */
-    u_char *p;			/* Pointer to next char to parse */
-    u_char *ucp = inp;		/* Pointer to current output char */
-    int l = *len;		/* Length left */
-    u_char maxslotindex, cflag;
-    int d;
-
-    /*
-     * Reset all his options.
-     */
-    BZERO(ho, sizeof(*ho));
-    
-    /*
-     * Process all his options.
-     */
-    next = inp;
-    while (l) {
-	orc = CONFACK;			/* Assume success */
-	cip = p = next;			/* Remember begining of CI */
-	if (l < 2 ||			/* Not enough data for CI header or */
-	    p[1] < 2 ||			/*  CI length too small or */
-	    p[1] > l) {			/*  CI length too big? */
-	    IPCPDEBUG(("ipcp_reqci: bad CI length!"));
-	    orc = CONFREJ;		/* Reject bad CI */
-	    cilen = l;			/* Reject till end of packet */
-	    l = 0;			/* Don't loop again */
-	    goto endswitch;
-	}
-	GETCHAR(citype, p);		/* Parse CI type */
-	GETCHAR(cilen, p);		/* Parse CI length */
-	l -= cilen;			/* Adjust remaining length */
-	next += cilen;			/* Step to next CI */
-
-	switch (citype) {		/* Check CI type */
-	case CI_ADDRS:
-	    if (!ao->neg_addr ||
-		cilen != CILEN_ADDRS) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-
-	    /*
-	     * If he has no address, or if we both have his address but
-	     * disagree about it, then NAK it with our idea.
-	     * In particular, if we don't know his address, but he does,
-	     * then accept it.
-	     */
-	    GETLONG(tl, p);		/* Parse source address (his) */
-	    ciaddr1 = htonl(tl);
-	    if (ciaddr1 != wo->hisaddr
-		&& (ciaddr1 == 0 || !wo->accept_remote)) {
-		orc = CONFNAK;
-		if (!reject_if_disagree) {
-		    DECPTR(sizeof(u_int32_t), p);
-		    tl = ntohl(wo->hisaddr);
-		    PUTLONG(tl, p);
-		}
-	    } else if (ciaddr1 == 0 && wo->hisaddr == 0) {
-		/*
-		 * If neither we nor he knows his address, reject the option.
-		 */
-		orc = CONFREJ;
-		wo->req_addr = 0;	/* don't NAK with 0.0.0.0 later */
-		break;
-	    }
-
-	    /*
-	     * If he doesn't know our address, or if we both have our address
-	     * but disagree about it, then NAK it with our idea.
-	     */
-	    GETLONG(tl, p);		/* Parse desination address (ours) */
-	    ciaddr2 = htonl(tl);
-	    if (ciaddr2 != wo->ouraddr) {
-		if (ciaddr2 == 0 || !wo->accept_local) {
-		    orc = CONFNAK;
-		    if (!reject_if_disagree) {
-			DECPTR(sizeof(u_int32_t), p);
-			tl = ntohl(wo->ouraddr);
-			PUTLONG(tl, p);
-		    }
-		} else {
-		    go->ouraddr = ciaddr2;	/* accept peer's idea */
-		}
-	    }
-
-	    ho->neg_addr = 1;
-	    ho->old_addrs = 1;
-	    ho->hisaddr = ciaddr1;
-	    ho->ouraddr = ciaddr2;
-	    break;
-
-	case CI_ADDR:
-	    if (!ao->neg_addr ||
-		cilen != CILEN_ADDR) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-
-	    /*
-	     * If he has no address, or if we both have his address but
-	     * disagree about it, then NAK it with our idea.
-	     * In particular, if we don't know his address, but he does,
-	     * then accept it.
-	     */
-	    GETLONG(tl, p);	/* Parse source address (his) */
-	    ciaddr1 = htonl(tl);
-	    if (ciaddr1 != wo->hisaddr
-		&& (ciaddr1 == 0 || !wo->accept_remote)) {
-		orc = CONFNAK;
-		if (!reject_if_disagree) {
-		    DECPTR(sizeof(u_int32_t), p);
-		    tl = ntohl(wo->hisaddr);
-		    PUTLONG(tl, p);
-		}
-	    } else if (ciaddr1 == 0 && wo->hisaddr == 0) {
-		/*
-		 * Don't ACK an address of 0.0.0.0 - reject it instead.
-		 */
-		orc = CONFREJ;
-		wo->req_addr = 0;	/* don't NAK with 0.0.0.0 later */
-		break;
-	    }
-	
-	    ho->neg_addr = 1;
-	    ho->hisaddr = ciaddr1;
-	    break;
-
-	case CI_MS_DNS1:
-	case CI_MS_DNS2:
-	    /* Microsoft primary or secondary DNS request */
-	    d = citype == CI_MS_DNS2;
-
-	    /* If we do not have a DNS address then we cannot send it */
-	    if (ao->dnsaddr[d] == 0 ||
-		cilen != CILEN_ADDR) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-	    GETLONG(tl, p);
-	    if (htonl(tl) != ao->dnsaddr[d]) {
-                DECPTR(sizeof(u_int32_t), p);
-		tl = ntohl(ao->dnsaddr[d]);
-		PUTLONG(tl, p);
-		orc = CONFNAK;
-            }
-            break;
-
-	case CI_MS_WINS1:
-	case CI_MS_WINS2:
-	    /* Microsoft primary or secondary WINS request */
-	    d = citype == CI_MS_WINS2;
-
-	    /* If we do not have a DNS address then we cannot send it */
-	    if (ao->winsaddr[d] == 0 ||
-		cilen != CILEN_ADDR) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-	    GETLONG(tl, p);
-	    if (htonl(tl) != ao->winsaddr[d]) {
-                DECPTR(sizeof(u_int32_t), p);
-		tl = ntohl(ao->winsaddr[d]);
-		PUTLONG(tl, p);
-		orc = CONFNAK;
-            }
-            break;
-	
-	case CI_COMPRESSTYPE:
-	    if (!ao->neg_vj ||
-		(cilen != CILEN_VJ && cilen != CILEN_COMPRESS)) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETSHORT(cishort, p);
-
-	    if (!(cishort == IPCP_VJ_COMP ||
-		  (cishort == IPCP_VJ_COMP_OLD && cilen == CILEN_COMPRESS))) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    ho->neg_vj = 1;
-	    ho->vj_protocol = cishort;
-	    if (cilen == CILEN_VJ) {
-		GETCHAR(maxslotindex, p);
-		if (maxslotindex > ao->maxslotindex) { 
-		    orc = CONFNAK;
-		    if (!reject_if_disagree){
-			DECPTR(1, p);
-			PUTCHAR(ao->maxslotindex, p);
-		    }
-		}
-		GETCHAR(cflag, p);
-		if (cflag && !ao->cflag) {
-		    orc = CONFNAK;
-		    if (!reject_if_disagree){
-			DECPTR(1, p);
-			PUTCHAR(wo->cflag, p);
-		    }
-		}
-		ho->maxslotindex = maxslotindex;
-		ho->cflag = cflag;
-	    } else {
-		ho->old_vj = 1;
-		ho->maxslotindex = MAX_STATES - 1;
-		ho->cflag = 1;
-	    }
-	    break;
-
-	default:
-	    orc = CONFREJ;
-	    break;
-	}
-endswitch:
-	if (orc == CONFACK &&		/* Good CI */
-	    rc != CONFACK)		/*  but prior CI wasnt? */
-	    continue;			/* Don't send this one */
-
-	if (orc == CONFNAK) {		/* Nak this CI? */
-	    if (reject_if_disagree)	/* Getting fed up with sending NAKs? */
-		orc = CONFREJ;		/* Get tough if so */
-	    else {
-		if (rc == CONFREJ)	/* Rejecting prior CI? */
-		    continue;		/* Don't send this one */
-		if (rc == CONFACK) {	/* Ack'd all prior CIs? */
-		    rc = CONFNAK;	/* Not anymore... */
-		    ucp = inp;		/* Backup */
-		}
-	    }
-	}
-
-	if (orc == CONFREJ &&		/* Reject this CI */
-	    rc != CONFREJ) {		/*  but no prior ones? */
-	    rc = CONFREJ;
-	    ucp = inp;			/* Backup */
-	}
-
-	/* Need to move CI? */
-	if (ucp != cip)
-	    BCOPY(cip, ucp, cilen);	/* Move it */
-
-	/* Update output pointer */
-	INCPTR(cilen, ucp);
-    }
-
-    /*
-     * If we aren't rejecting this packet, and we want to negotiate
-     * their address, and they didn't send their address, then we
-     * send a NAK with a CI_ADDR option appended.  We assume the
-     * input buffer is long enough that we can append the extra
-     * option safely.
-     */
-    if (rc != CONFREJ && !ho->neg_addr &&
-	wo->req_addr && !reject_if_disagree) {
-	if (rc == CONFACK) {
-	    rc = CONFNAK;
-	    ucp = inp;			/* reset pointer */
-	    wo->req_addr = 0;		/* don't ask again */
-	}
-	PUTCHAR(CI_ADDR, ucp);
-	PUTCHAR(CILEN_ADDR, ucp);
-	tl = ntohl(wo->hisaddr);
-	PUTLONG(tl, ucp);
-    }
-
-    *len = ucp - inp;			/* Compute output length */
-    IPCPDEBUG(("ipcp: returning Configure-%s", CODENAME(rc)));
-    return (rc);			/* Return final code */
-}
-
-
-/*
- * ip_check_options - check that any IP-related options are OK,
- * and assign appropriate defaults.
- */
-static void
-ip_check_options()
-{
-    struct hostent *hp;
-    u_int32_t local;
-    ipcp_options *wo = &ipcp_wantoptions[0];
-
-    /*
-     * Default our local IP address based on our hostname.
-     * If local IP address already given, don't bother.
-     */
-    if (wo->ouraddr == 0 && !disable_defaultip) {
-	/*
-	 * Look up our hostname (possibly with domain name appended)
-	 * and take the first IP address as our local IP address.
-	 * If there isn't an IP address for our hostname, too bad.
-	 */
-	wo->accept_local = 1;	/* don't insist on this default value */
-	if ((hp = gethostbyname(hostname)) != NULL) {
-	    local = *(u_int32_t *)hp->h_addr;
-	    if (local != 0 && !bad_ip_adrs(local))
-		wo->ouraddr = local;
-	}
-    }
-    ask_for_local = wo->ouraddr != 0 || !disable_defaultip;
-}
-
-
-/*
- * ip_demand_conf - configure the interface as though
- * IPCP were up, for use with dial-on-demand.
- */
-static int
-ip_demand_conf(u)
-    int u;
-{
-    ipcp_options *wo = &ipcp_wantoptions[u];
-
-    if (wo->hisaddr == 0) {
-	/* make up an arbitrary address for the peer */
-	wo->hisaddr = htonl(0x0a707070 + ifunit);
-	wo->accept_remote = 1;
-    }
-    if (wo->ouraddr == 0) {
-	/* make up an arbitrary address for us */
-	wo->ouraddr = htonl(0x0a404040 + ifunit);
-	wo->accept_local = 1;
-	ask_for_local = 0;	/* don't tell the peer this address */
-    }
-    if (!sifaddr(u, wo->ouraddr, wo->hisaddr, GetMask(wo->ouraddr)))
-	return 0;
-    if (!sifup(u))
-	return 0;
-    if (!sifnpmode(u, PPP_IP, NPMODE_QUEUE))
-	return 0;
-    if (wo->default_route)
-	if (sifdefaultroute(u, wo->ouraddr, wo->hisaddr))
-	    default_route_set[u] = 1;
-    if (wo->proxy_arp)
-	if (sifproxyarp(u, wo->hisaddr))
-	    proxy_arp_set[u] = 1;
-
-    notice("local  IP address %I", wo->ouraddr);
-    notice("remote IP address %I", wo->hisaddr);
-
-    return 1;
-}
-
-
-/*
- * ipcp_up - IPCP has come UP.
- *
- * Configure the IP network interface appropriately and bring it up.
- */
-static void
-ipcp_up(f)
-    fsm *f;
-{
-    u_int32_t mask;
-    ipcp_options *ho = &ipcp_hisoptions[f->unit];
-    ipcp_options *go = &ipcp_gotoptions[f->unit];
-    ipcp_options *wo = &ipcp_wantoptions[f->unit];
-
-    IPCPDEBUG(("ipcp: up"));
-
-    /*
-     * We must have a non-zero IP address for both ends of the link.
-     */
-    if (!ho->neg_addr)
-	ho->hisaddr = wo->hisaddr;
-
-    if (go->ouraddr == 0) {
-	error("Could not determine local IP address");
-	ipcp_close(f->unit, "Could not determine local IP address");
-	return;
-    }
-    if (ho->hisaddr == 0) {
-	ho->hisaddr = htonl(0x0a404040 + ifunit);
-	warn("Could not determine remote IP address: defaulting to %I",
-	     ho->hisaddr);
-    }
-    script_setenv("IPLOCAL", ip_ntoa(go->ouraddr), 0);
-    script_setenv("IPREMOTE", ip_ntoa(ho->hisaddr), 1);
-
-    if (usepeerdns && (go->dnsaddr[0] || go->dnsaddr[1])) {
-	script_setenv("USEPEERDNS", "1", 0);
-	if (go->dnsaddr[0])
-	    script_setenv("DNS1", ip_ntoa(go->dnsaddr[0]), 0);
-	if (go->dnsaddr[1])
-	    script_setenv("DNS2", ip_ntoa(go->dnsaddr[1]), 0);
-	create_resolv(go->dnsaddr[0], go->dnsaddr[1]);
-    }
-
-    /*
-     * Check that the peer is allowed to use the IP address it wants.
-     */
-    if (!auth_ip_addr(f->unit, ho->hisaddr)) {
-	error("Peer is not authorized to use remote address %I", ho->hisaddr);
-	ipcp_close(f->unit, "Unauthorized remote IP address");
-	return;
-    }
-
-    /* set tcp compression */
-    sifvjcomp(f->unit, ho->neg_vj, ho->cflag, ho->maxslotindex);
-
-    /*
-     * If we are doing dial-on-demand, the interface is already
-     * configured, so we put out any saved-up packets, then set the
-     * interface to pass IP packets.
-     */
-    if (demand) {
-	if (go->ouraddr != wo->ouraddr || ho->hisaddr != wo->hisaddr) {
-	    ipcp_clear_addrs(f->unit, wo->ouraddr, wo->hisaddr);
-	    if (go->ouraddr != wo->ouraddr) {
-		warn("Local IP address changed to %I", go->ouraddr);
-		script_setenv("OLDIPLOCAL", ip_ntoa(wo->ouraddr), 0);
-		wo->ouraddr = go->ouraddr;
-	    } else
-		script_unsetenv("OLDIPLOCAL");
-	    if (ho->hisaddr != wo->hisaddr) {
-		warn("Remote IP address changed to %I", ho->hisaddr);
-		script_setenv("OLDIPREMOTE", ip_ntoa(wo->hisaddr), 0);
-		wo->hisaddr = ho->hisaddr;
-	    } else
-		script_unsetenv("OLDIPREMOTE");
-
-	    /* Set the interface to the new addresses */
-	    mask = GetMask(go->ouraddr);
-	    if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
-		if (debug)
-		    warn("Interface configuration failed");
-		ipcp_close(f->unit, "Interface configuration failed");
-		return;
-	    }
-
-	    /* assign a default route through the interface if required */
-	    if (ipcp_wantoptions[f->unit].default_route) 
-		if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
-		    default_route_set[f->unit] = 1;
-
-	    /* Make a proxy ARP entry if requested. */
-	    if (ipcp_wantoptions[f->unit].proxy_arp)
-		if (sifproxyarp(f->unit, ho->hisaddr))
-		    proxy_arp_set[f->unit] = 1;
-
-	}
-	demand_rexmit(PPP_IP);
-	sifnpmode(f->unit, PPP_IP, NPMODE_PASS);
-
-    } else {
-	/*
-	 * Set IP addresses and (if specified) netmask.
-	 */
-	mask = GetMask(go->ouraddr);
-
-#if !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-	if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
-	    if (debug)
-		warn("Interface configuration failed");
-	    ipcp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif
-
-	/* bring the interface up for IP */
-	if (!sifup(f->unit)) {
-	    if (debug)
-		warn("Interface failed to come up");
-	    ipcp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-
-#if (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-	if (!sifaddr(f->unit, go->ouraddr, ho->hisaddr, mask)) {
-	    if (debug)
-		warn("Interface configuration failed");
-	    ipcp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif
-	sifnpmode(f->unit, PPP_IP, NPMODE_PASS);
-
-	/* assign a default route through the interface if required */
-	if (ipcp_wantoptions[f->unit].default_route) 
-	    if (sifdefaultroute(f->unit, go->ouraddr, ho->hisaddr))
-		default_route_set[f->unit] = 1;
-
-	/* Make a proxy ARP entry if requested. */
-	if (ipcp_wantoptions[f->unit].proxy_arp)
-	    if (sifproxyarp(f->unit, ho->hisaddr))
-		proxy_arp_set[f->unit] = 1;
-
-	ipcp_wantoptions[0].ouraddr = go->ouraddr;
-
-	notice("local  IP address %I", go->ouraddr);
-	notice("remote IP address %I", ho->hisaddr);
-	if (go->dnsaddr[0])
-	    notice("primary   DNS address %I", go->dnsaddr[0]);
-	if (go->dnsaddr[1])
-	    notice("secondary DNS address %I", go->dnsaddr[1]);
-    }
-
-    np_up(f->unit, PPP_IP);
-    ipcp_is_up = 1;
-
-    if (ip_up_hook)
-	ip_up_hook();
-
-    /*
-     * Execute the ip-up script, like this:
-     *	/etc/ppp/ip-up interface tty speed local-IP remote-IP
-     */
-    if (ipcp_script_state == s_down && ipcp_script_pid == 0) {
-	ipcp_script_state = s_up;
-	ipcp_script(_PATH_IPUP);
-    }
-}
-
-
-/*
- * ipcp_down - IPCP has gone DOWN.
- *
- * Take the IP network interface down, clear its addresses
- * and delete routes through it.
- */
-static void
-ipcp_down(f)
-    fsm *f;
-{
-    IPCPDEBUG(("ipcp: down"));
-    /* XXX a bit IPv4-centric here, we only need to get the stats
-     * before the interface is marked down. */
-    update_link_stats(f->unit);
-    if (ip_down_hook)
-	ip_down_hook();
-    if (ipcp_is_up) {
-	ipcp_is_up = 0;
-	np_down(f->unit, PPP_IP);
-    }
-    sifvjcomp(f->unit, 0, 0, 0);
-
-    /*
-     * If we are doing dial-on-demand, set the interface
-     * to queue up outgoing packets (for now).
-     */
-    if (demand) {
-	sifnpmode(f->unit, PPP_IP, NPMODE_QUEUE);
-    } else {
-	sifnpmode(f->unit, PPP_IP, NPMODE_DROP);
-	sifdown(f->unit);
-	ipcp_clear_addrs(f->unit, ipcp_gotoptions[f->unit].ouraddr,
-			 ipcp_hisoptions[f->unit].hisaddr);
-    }
-
-    /* Execute the ip-down script */
-    if (ipcp_script_state == s_up && ipcp_script_pid == 0) {
-	ipcp_script_state = s_down;
-	ipcp_script(_PATH_IPDOWN);
-    }
-}
-
-
-/*
- * ipcp_clear_addrs() - clear the interface addresses, routes,
- * proxy arp entries, etc.
- */
-static void
-ipcp_clear_addrs(unit, ouraddr, hisaddr)
-    int unit;
-    u_int32_t ouraddr;  /* local address */
-    u_int32_t hisaddr;  /* remote address */
-{
-    if (proxy_arp_set[unit]) {
-	cifproxyarp(unit, hisaddr);
-	proxy_arp_set[unit] = 0;
-    }
-    if (default_route_set[unit]) {
-	cifdefaultroute(unit, ouraddr, hisaddr);
-	default_route_set[unit] = 0;
-    }
-    cifaddr(unit, ouraddr, hisaddr);
-}
-
-
-/*
- * ipcp_finished - possibly shut down the lower layers.
- */
-static void
-ipcp_finished(f)
-    fsm *f;
-{
-    np_finished(f->unit, PPP_IP);
-}
-
-
-/*
- * ipcp_script_done - called when the ip-up or ip-down script
- * has finished.
- */
-static void
-ipcp_script_done(arg)
-    void *arg;
-{
-    ipcp_script_pid = 0;
-    switch (ipcp_script_state) {
-    case s_up:
-	if (ipcp_fsm[0].state != OPENED) {
-	    ipcp_script_state = s_down;
-	    ipcp_script(_PATH_IPDOWN);
-	}
-	break;
-    case s_down:
-	if (ipcp_fsm[0].state == OPENED) {
-	    ipcp_script_state = s_up;
-	    ipcp_script(_PATH_IPUP);
-	}
-	break;
-    }
-}
-
-
-/*
- * ipcp_script - Execute a script with arguments
- * interface-name tty-name speed local-IP remote-IP.
- */
-static void
-ipcp_script(script)
-    char *script;
-{
-    char strspeed[32], strlocal[32], strremote[32];
-    char *argv[8];
-
-    slprintf(strspeed, sizeof(strspeed), "%d", baud_rate);
-    slprintf(strlocal, sizeof(strlocal), "%I", ipcp_gotoptions[0].ouraddr);
-    slprintf(strremote, sizeof(strremote), "%I", ipcp_hisoptions[0].hisaddr);
-
-    argv[0] = script;
-    argv[1] = ifname;
-    argv[2] = devnam;
-    argv[3] = strspeed;
-    argv[4] = strlocal;
-    argv[5] = strremote;
-    argv[6] = ipparam;
-    argv[7] = NULL;
-    ipcp_script_pid = run_program(script, argv, 0, ipcp_script_done, NULL);
-}
-
-/*
- * create_resolv - create the replacement resolv.conf file
- */
-static void
-create_resolv(peerdns1, peerdns2)
-    u_int32_t peerdns1, peerdns2;
-{
-    FILE *f;
-
-    f = fopen(_PATH_RESOLV, "w");
-    if (f == NULL) {
-	error("Failed to create %s: %m", _PATH_RESOLV);
-	return;
-    }
-
-    if (peerdns1)
-	fprintf(f, "nameserver %s\n", ip_ntoa(peerdns1));
-
-    if (peerdns2)
-	fprintf(f, "nameserver %s\n", ip_ntoa(peerdns2));
-
-    if (ferror(f))
-	error("Write failed to %s: %m", _PATH_RESOLV);
-
-    fclose(f);
-}
-
-/*
- * ipcp_printpkt - print the contents of an IPCP packet.
- */
-static char *ipcp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipcp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len, olen;
-    u_char *pstart, *optend;
-    u_short cishort;
-    u_int32_t cilong;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ipcp_codenames) / sizeof(char *))
-	printer(arg, " %s", ipcp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print option list */
-	while (len >= 2) {
-	    GETCHAR(code, p);
-	    GETCHAR(olen, p);
-	    p -= 2;
-	    if (olen < 2 || olen > len) {
-		break;
-	    }
-	    printer(arg, " <");
-	    len -= olen;
-	    optend = p + olen;
-	    switch (code) {
-	    case CI_ADDRS:
-		if (olen == CILEN_ADDRS) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer(arg, "addrs %I", htonl(cilong));
-		    GETLONG(cilong, p);
-		    printer(arg, " %I", htonl(cilong));
-		}
-		break;
-	    case CI_COMPRESSTYPE:
-		if (olen >= CILEN_COMPRESS) {
-		    p += 2;
-		    GETSHORT(cishort, p);
-		    printer(arg, "compress ");
-		    switch (cishort) {
-		    case IPCP_VJ_COMP:
-			printer(arg, "VJ");
-			break;
-		    case IPCP_VJ_COMP_OLD:
-			printer(arg, "old-VJ");
-			break;
-		    default:
-			printer(arg, "0x%x", cishort);
-		    }
-		}
-		break;
-	    case CI_ADDR:
-		if (olen == CILEN_ADDR) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer(arg, "addr %I", htonl(cilong));
-		}
-		break;
-	    case CI_MS_DNS1:
-	    case CI_MS_DNS2:
-	        p += 2;
-		GETLONG(cilong, p);
-		printer(arg, "ms-dns%d %I", code - CI_MS_DNS1 + 1,
-			htonl(cilong));
-		break;
-	    case CI_MS_WINS1:
-	    case CI_MS_WINS2:
-	        p += 2;
-		GETLONG(cilong, p);
-		printer(arg, "ms-wins %I", htonl(cilong));
-		break;
-	    }
-	    while (p < optend) {
-		GETCHAR(code, p);
-		printer(arg, " %.2x", code);
-	    }
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    printer(arg, " ");
-	    print_string((char *)p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-
-    return p - pstart;
-}
-
-/*
- * ip_active_pkt - see if this IP packet is worth bringing the link up for.
- * We don't bring the link up for IP fragments or for TCP FIN packets
- * with no data.
- */
-#define IP_HDRLEN	20	/* bytes */
-#define IP_OFFMASK	0x1fff
-// #define IPPROTO_TCP	6
-#define TCP_HDRLEN	20
-#define TH_FIN		0x01
-
-/*
- * We use these macros because the IP header may be at an odd address,
- * and some compilers might use word loads to get th_off or ip_hl.
- */
-
-#define net_short(x)	(((x)[0] << 8) + (x)[1])
-#define get_iphl(x)	(((unsigned char *)(x))[0] & 0xF)
-#define get_ipoff(x)	net_short((unsigned char *)(x) + 6)
-#define get_ipproto(x)	(((unsigned char *)(x))[9])
-#define get_tcpoff(x)	(((unsigned char *)(x))[12] >> 4)
-#define get_tcpflags(x)	(((unsigned char *)(x))[13])
-
-static int
-ip_active_pkt(pkt, len)
-    u_char *pkt;
-    int len;
-{
-    u_char *tcp;
-    int hlen;
-
-    len -= PPP_HDRLEN;
-    pkt += PPP_HDRLEN;
-    if (len < IP_HDRLEN)
-	return 0;
-    if ((get_ipoff(pkt) & IP_OFFMASK) != 0)
-	return 0;
-    if (get_ipproto(pkt) != IPPROTO_TCP)
-	return 1;
-    hlen = get_iphl(pkt) * 4;
-    if (len < hlen + TCP_HDRLEN)
-	return 0;
-    tcp = pkt + hlen;
-    if ((get_tcpflags(tcp) & TH_FIN) != 0 && len == hlen + get_tcpoff(tcp) * 4)
-	return 0;
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/ipcp.h b/mdk-stage1/ppp/pppd/ipcp.h
deleted file mode 100644
index 8c5aca861..000000000
--- a/mdk-stage1/ppp/pppd/ipcp.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * ipcp.h - IP Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_ADDRS	1	/* IP Addresses */
-#define CI_COMPRESSTYPE	2	/* Compression Type */
-#define	CI_ADDR		3
-
-#define CI_MS_DNS1	129	/* Primary DNS value */
-#define CI_MS_WINS1	130	/* Primary WINS value */
-#define CI_MS_DNS2	131	/* Secondary DNS value */
-#define CI_MS_WINS2	132	/* Secondary WINS value */
-
-#define MAX_STATES 16		/* from slcompress.h */
-
-#define IPCP_VJMODE_OLD 1	/* "old" mode (option # = 0x0037) */
-#define IPCP_VJMODE_RFC1172 2	/* "old-rfc"mode (option # = 0x002d) */
-#define IPCP_VJMODE_RFC1332 3	/* "new-rfc"mode (option # = 0x002d, */
-                                /*  maxslot and slot number compression) */
-
-#define IPCP_VJ_COMP 0x002d	/* current value for VJ compression option*/
-#define IPCP_VJ_COMP_OLD 0x0037	/* "old" (i.e, broken) value for VJ */
-				/* compression option*/ 
-
-typedef struct ipcp_options {
-    bool neg_addr;		/* Negotiate IP Address? */
-    bool old_addrs;		/* Use old (IP-Addresses) option? */
-    bool req_addr;		/* Ask peer to send IP address? */
-    bool default_route;		/* Assign default route through interface? */
-    bool proxy_arp;		/* Make proxy ARP entry for peer? */
-    bool neg_vj;		/* Van Jacobson Compression? */
-    bool old_vj;		/* use old (short) form of VJ option? */
-    bool accept_local;		/* accept peer's value for ouraddr */
-    bool accept_remote;		/* accept peer's value for hisaddr */
-    bool req_dns1;		/* Ask peer to send primary DNS address? */
-    bool req_dns2;		/* Ask peer to send secondary DNS address? */
-    int  vj_protocol;		/* protocol value to use in VJ option */
-    int  maxslotindex;		/* values for RFC1332 VJ compression neg. */
-    bool cflag;
-    u_int32_t ouraddr, hisaddr;	/* Addresses in NETWORK BYTE ORDER */
-    u_int32_t dnsaddr[2];	/* Primary and secondary MS DNS entries */
-    u_int32_t winsaddr[2];	/* Primary and secondary MS WINS entries */
-} ipcp_options;
-
-extern fsm ipcp_fsm[];
-extern ipcp_options ipcp_wantoptions[];
-extern ipcp_options ipcp_gotoptions[];
-extern ipcp_options ipcp_allowoptions[];
-extern ipcp_options ipcp_hisoptions[];
-
-char *ip_ntoa __P((u_int32_t));
-
-extern struct protent ipcp_protent;
diff --git a/mdk-stage1/ppp/pppd/ipv6cp.c b/mdk-stage1/ppp/pppd/ipv6cp.c
deleted file mode 100644
index 54ff7d7d8..000000000
--- a/mdk-stage1/ppp/pppd/ipv6cp.c
+++ /dev/null
@@ -1,1512 +0,0 @@
-/*
-    ipv6cp.c - PPP IPV6 Control Protocol.
-    Copyright (C) 1999  Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms.  The name of the author may not be
-    used to endorse or promote products derived from this software
-    without specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-*/
-
-/*  Original version, based on RFC2023 :
-
-    Copyright (c) 1995, 1996, 1997 Francis.Dupont@inria.fr, INRIA Rocquencourt,
-    Alain.Durand@imag.fr, IMAG,
-    Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
-    Copyright (c) 1998, 1999 Francis.Dupont@inria.fr, GIE DYADE,
-    Alain.Durand@imag.fr, IMAG,
-    Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
-    Ce travail a �t� fait au sein du GIE DYADE (Groupement d'Int�r�t
-    �conomique ayant pour membres BULL S.A. et l'INRIA).
-
-    Ce logiciel informatique est disponible aux conditions
-    usuelles dans la recherche, c'est-�-dire qu'il peut
-    �tre utilis�, copi�, modifi�, distribu� � l'unique
-    condition que ce texte soit conserv� afin que
-    l'origine de ce logiciel soit reconnue.
-
-    Le nom de l'Institut National de Recherche en Informatique
-    et en Automatique (INRIA), de l'IMAG, ou d'une personne morale
-    ou physique ayant particip� � l'�laboration de ce logiciel ne peut
-    �tre utilis� sans son accord pr�alable explicite.
-
-    Ce logiciel est fourni tel quel sans aucune garantie,
-    support ou responsabilit� d'aucune sorte.
-    Ce logiciel est d�riv� de sources d'origine
-    "University of California at Berkeley" et
-    "Digital Equipment Corporation" couvertes par des copyrights.
-
-    L'Institut d'Informatique et de Math�matiques Appliqu�es de Grenoble (IMAG)
-    est une f�d�ration d'unit�s mixtes de recherche du CNRS, de l'Institut National
-    Polytechnique de Grenoble et de l'Universit� Joseph Fourier regroupant
-    sept laboratoires dont le laboratoire Logiciels, Syst�mes, R�seaux (LSR).
-
-    This work has been done in the context of GIE DYADE (joint R & D venture
-    between BULL S.A. and INRIA).
-
-    This software is available with usual "research" terms
-    with the aim of retain credits of the software. 
-    Permission to use, copy, modify and distribute this software for any
-    purpose and without fee is hereby granted, provided that the above
-    copyright notice and this permission notice appear in all copies,
-    and the name of INRIA, IMAG, or any contributor not be used in advertising
-    or publicity pertaining to this material without the prior explicit
-    permission. The software is provided "as is" without any
-    warranties, support or liabilities of any kind.
-    This software is derived from source code from
-    "University of California at Berkeley" and
-    "Digital Equipment Corporation" protected by copyrights.
-
-    Grenoble's Institute of Computer Science and Applied Mathematics (IMAG)
-    is a federation of seven research units funded by the CNRS, National
-    Polytechnic Institute of Grenoble and University Joseph Fourier.
-    The research unit in Software, Systems, Networks (LSR) is member of IMAG.
-*/
-
-/*
- * Derived from :
- *
- *
- * ipcp.c - PPP IP Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$ 
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO: 
- *
- * Proxy Neighbour Discovery.
- *
- * Better defines for selecting the ordering of
- *   interface up / set address. (currently checks for __linux__,
- *   since SVR4 && (SNI || __USLC__) didn't work properly)
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <netdb.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-#include "ipv6cp.h"
-#include "magic.h"
-#include "pathnames.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipv6cp_options ipv6cp_wantoptions[NUM_PPP];     /* Options that we want to request */
-ipv6cp_options ipv6cp_gotoptions[NUM_PPP];	/* Options that peer ack'd */
-ipv6cp_options ipv6cp_allowoptions[NUM_PPP];	/* Options we allow peer to request */
-ipv6cp_options ipv6cp_hisoptions[NUM_PPP];	/* Options that we ack'd */
-int no_ifaceid_neg = 0;
-
-/* local vars */
-static int ipv6cp_is_up;
-
-/*
- * Callbacks for fsm code.  (CI = Configuration Information)
- */
-static void ipv6cp_resetci __P((fsm *));	/* Reset our CI */
-static int  ipv6cp_cilen __P((fsm *));	        /* Return length of our CI */
-static void ipv6cp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int  ipv6cp_ackci __P((fsm *, u_char *, int));	/* Peer ack'd our CI */
-static int  ipv6cp_nakci __P((fsm *, u_char *, int));	/* Peer nak'd our CI */
-static int  ipv6cp_rejci __P((fsm *, u_char *, int));	/* Peer rej'd our CI */
-static int  ipv6cp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipv6cp_up __P((fsm *));		/* We're UP */
-static void ipv6cp_down __P((fsm *));		/* We're DOWN */
-static void ipv6cp_finished __P((fsm *));	/* Don't need lower layer */
-
-fsm ipv6cp_fsm[NUM_PPP];		/* IPV6CP fsm structure */
-
-static fsm_callbacks ipv6cp_callbacks = { /* IPV6CP callback routines */
-    ipv6cp_resetci,		/* Reset our Configuration Information */
-    ipv6cp_cilen,		/* Length of our Configuration Information */
-    ipv6cp_addci,		/* Add our Configuration Information */
-    ipv6cp_ackci,		/* ACK our Configuration Information */
-    ipv6cp_nakci,		/* NAK our Configuration Information */
-    ipv6cp_rejci,		/* Reject our Configuration Information */
-    ipv6cp_reqci,		/* Request peer's Configuration Information */
-    ipv6cp_up,			/* Called when fsm reaches OPENED state */
-    ipv6cp_down,		/* Called when fsm leaves OPENED state */
-    NULL,			/* Called when we want the lower layer up */
-    ipv6cp_finished,		/* Called when we want the lower layer down */
-    NULL,			/* Called when Protocol-Reject received */
-    NULL,			/* Retransmission is necessary */
-    NULL,			/* Called to handle protocol-specific codes */
-    "IPV6CP"			/* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setifaceid __P((char **arg));
-static void printifaceid __P((option_t *,
-			      void (*)(void *, char *, ...), void *));
-
-static option_t ipv6cp_option_list[] = {
-    { "ipv6", o_special, (void *)setifaceid,
-      "Set interface identifiers for IPV6",
-      OPT_A2PRINTER, (void *)printifaceid },
-
-    { "+ipv6", o_bool, &ipv6cp_protent.enabled_flag,
-      "Enable IPv6 and IPv6CP", OPT_PRIO | 1 },
-    { "noipv6", o_bool, &ipv6cp_protent.enabled_flag,
-      "Disable IPv6 and IPv6CP", OPT_PRIOSUB },
-    { "-ipv6", o_bool, &ipv6cp_protent.enabled_flag,
-      "Disable IPv6 and IPv6CP", OPT_PRIOSUB | OPT_ALIAS },
-
-    { "ipv6cp-accept-local", o_bool, &ipv6cp_allowoptions[0].accept_local,
-      "Accept peer's interface identifier for us", 1 },
-
-    { "ipv6cp-use-ipaddr", o_bool, &ipv6cp_allowoptions[0].use_ip,
-      "Use (default) IPv4 address as interface identifier", 1 },
-
-#if defined(SOL2)
-    { "ipv6cp-use-persistent", o_bool, &ipv6cp_wantoptions[0].use_persistent,
-      "Use uniquely-available persistent value for link local address", 1 },
-#endif /* defined(SOL2) */
-
-    { "ipv6cp-restart", o_int, &ipv6cp_fsm[0].timeouttime,
-      "Set timeout for IPv6CP", OPT_PRIO },
-    { "ipv6cp-max-terminate", o_int, &ipv6cp_fsm[0].maxtermtransmits,
-      "Set max #xmits for term-reqs", OPT_PRIO },
-    { "ipv6cp-max-configure", o_int, &ipv6cp_fsm[0].maxconfreqtransmits,
-      "Set max #xmits for conf-reqs", OPT_PRIO },
-    { "ipv6cp-max-failure", o_int, &ipv6cp_fsm[0].maxnakloops,
-      "Set max #conf-naks for IPv6CP", OPT_PRIO },
-
-   { NULL }
-};
-
-
-/*
- * Protocol entry points from main code.
- */
-static void ipv6cp_init __P((int));
-static void ipv6cp_open __P((int));
-static void ipv6cp_close __P((int, char *));
-static void ipv6cp_lowerup __P((int));
-static void ipv6cp_lowerdown __P((int));
-static void ipv6cp_input __P((int, u_char *, int));
-static void ipv6cp_protrej __P((int));
-static int  ipv6cp_printpkt __P((u_char *, int,
-			       void (*) __P((void *, char *, ...)), void *));
-static void ipv6_check_options __P((void));
-static int  ipv6_demand_conf __P((int));
-static int  ipv6_active_pkt __P((u_char *, int));
-
-struct protent ipv6cp_protent = {
-    PPP_IPV6CP,
-    ipv6cp_init,
-    ipv6cp_input,
-    ipv6cp_protrej,
-    ipv6cp_lowerup,
-    ipv6cp_lowerdown,
-    ipv6cp_open,
-    ipv6cp_close,
-    ipv6cp_printpkt,
-    NULL,
-    0,
-    "IPV6CP",
-    "IPV6",
-    ipv6cp_option_list,
-    ipv6_check_options,
-    ipv6_demand_conf,
-    ipv6_active_pkt
-};
-
-static void ipv6cp_clear_addrs __P((int, eui64_t, eui64_t));
-static void ipv6cp_script __P((char *));
-static void ipv6cp_script_done __P((void *));
-
-/*
- * Lengths of configuration options.
- */
-#define CILEN_VOID	2
-#define CILEN_COMPRESS	4	/* length for RFC2023 compress opt. */
-#define CILEN_IFACEID   10	/* RFC2472, interface identifier    */
-
-#define CODENAME(x)	((x) == CONFACK ? "ACK" : \
-			 (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * This state variable is used to ensure that we don't
- * run an ipcp-up/down script while one is already running.
- */
-static enum script_state {
-    s_down,
-    s_up,
-} ipv6cp_script_state;
-static pid_t ipv6cp_script_pid;
-
-/*
- * setifaceid - set the interface identifiers manually
- */
-static int
-setifaceid(argv)
-    char **argv;
-{
-    char *comma, *arg, c;
-    ipv6cp_options *wo = &ipv6cp_wantoptions[0];
-    struct in6_addr addr;
-    static int prio_local, prio_remote;
-
-#define VALIDID(a) ( (((a).s6_addr32[0] == 0) && ((a).s6_addr32[1] == 0)) && \
-			(((a).s6_addr32[2] != 0) || ((a).s6_addr32[3] != 0)) )
-    
-    arg = *argv;
-    if ((comma = strchr(arg, ',')) == NULL)
-	comma = arg + strlen(arg);
-    
-    /* 
-     * If comma first character, then no local identifier
-     */
-    if (comma != arg) {
-	c = *comma;
-	*comma = '\0';
-
-	if (inet_pton(AF_INET6, arg, &addr) == 0 || !VALIDID(addr)) {
-	    option_error("Illegal interface identifier (local): %s", arg);
-	    return 0;
-	}
-
-	if (option_priority >= prio_local) {
-	    eui64_copy(addr.s6_addr32[2], wo->ourid);
-	    wo->opt_local = 1;
-	    prio_local = option_priority;
-	}
-	*comma = c;
-    }
-    
-    /*
-     * If comma last character, the no remote identifier
-     */
-    if (*comma != 0 && *++comma != '\0') {
-	if (inet_pton(AF_INET6, comma, &addr) == 0 || !VALIDID(addr)) {
-	    option_error("Illegal interface identifier (remote): %s", comma);
-	    return 0;
-	}
-	if (option_priority >= prio_remote) {
-	    eui64_copy(addr.s6_addr32[2], wo->hisid);
-	    wo->opt_remote = 1;
-	    prio_remote = option_priority;
-	}
-    }
-
-    if (override_value("+ipv6", option_priority, option_source))
-	ipv6cp_protent.enabled_flag = 1;
-    return 1;
-}
-
-static void
-printifaceid(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	ipv6cp_options *wo = &ipv6cp_wantoptions[0];
-
-	if (wo->opt_local)
-		printer(arg, "%s", llv6_ntoa(wo->ourid));
-	printer(arg, ",");
-	if (wo->opt_remote)
-		printer(arg, "%s", llv6_ntoa(wo->hisid));
-}
-
-/*
- * Make a string representation of a network address.
- */
-char *
-llv6_ntoa(ifaceid)
-    eui64_t ifaceid;
-{
-    static char b[64];
-
-    sprintf(b, "fe80::%s", eui64_ntoa(ifaceid));
-    return b;
-}
-
-
-/*
- * ipv6cp_init - Initialize IPV6CP.
- */
-static void
-ipv6cp_init(unit)
-    int unit;
-{
-    fsm *f = &ipv6cp_fsm[unit];
-    ipv6cp_options *wo = &ipv6cp_wantoptions[unit];
-    ipv6cp_options *ao = &ipv6cp_allowoptions[unit];
-
-    f->unit = unit;
-    f->protocol = PPP_IPV6CP;
-    f->callbacks = &ipv6cp_callbacks;
-    fsm_init(&ipv6cp_fsm[unit]);
-
-    memset(wo, 0, sizeof(*wo));
-    memset(ao, 0, sizeof(*ao));
-
-    wo->accept_local = 1;
-    wo->neg_ifaceid = 1;
-    ao->neg_ifaceid = 1;
-
-#ifdef IPV6CP_COMP
-    wo->neg_vj = 1;
-    ao->neg_vj = 1;
-    wo->vj_protocol = IPV6CP_COMP;
-#endif
-
-}
-
-
-/*
- * ipv6cp_open - IPV6CP is allowed to come up.
- */
-static void
-ipv6cp_open(unit)
-    int unit;
-{
-    fsm_open(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_close - Take IPV6CP down.
- */
-static void
-ipv6cp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    fsm_close(&ipv6cp_fsm[unit], reason);
-}
-
-
-/*
- * ipv6cp_lowerup - The lower layer is up.
- */
-static void
-ipv6cp_lowerup(unit)
-    int unit;
-{
-    fsm_lowerup(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_lowerdown - The lower layer is down.
- */
-static void
-ipv6cp_lowerdown(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_input - Input IPV6CP packet.
- */
-static void
-ipv6cp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm_input(&ipv6cp_fsm[unit], p, len);
-}
-
-
-/*
- * ipv6cp_protrej - A Protocol-Reject was received for IPV6CP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipv6cp_protrej(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipv6cp_fsm[unit]);
-}
-
-
-/*
- * ipv6cp_resetci - Reset our CI.
- */
-static void
-ipv6cp_resetci(f)
-    fsm *f;
-{
-    ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-
-    wo->req_ifaceid = wo->neg_ifaceid && ipv6cp_allowoptions[f->unit].neg_ifaceid;
-    
-    if (!wo->opt_local) {
-	eui64_magic_nz(wo->ourid);
-    }
-    
-    *go = *wo;
-    eui64_zero(go->hisid);	/* last proposed interface identifier */
-}
-
-
-/*
- * ipv6cp_cilen - Return length of our CI.
- */
-static int
-ipv6cp_cilen(f)
-    fsm *f;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-
-#define LENCIVJ(neg)		(neg ? CILEN_COMPRESS : 0)
-#define LENCIIFACEID(neg)	(neg ? CILEN_IFACEID : 0)
-
-    return (LENCIIFACEID(go->neg_ifaceid) +
-	    LENCIVJ(go->neg_vj));
-}
-
-
-/*
- * ipv6cp_addci - Add our desired CIs to a packet.
- */
-static void
-ipv6cp_addci(f, ucp, lenp)
-    fsm *f;
-    u_char *ucp;
-    int *lenp;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    int len = *lenp;
-
-#define ADDCIVJ(opt, neg, val) \
-    if (neg) { \
-	int vjlen = CILEN_COMPRESS; \
-	if (len >= vjlen) { \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(vjlen, ucp); \
-	    PUTSHORT(val, ucp); \
-	    len -= vjlen; \
-	} else \
-	    neg = 0; \
-    }
-
-#define ADDCIIFACEID(opt, neg, val1) \
-    if (neg) { \
-	int idlen = CILEN_IFACEID; \
-	if (len >= idlen) { \
-	    PUTCHAR(opt, ucp); \
-	    PUTCHAR(idlen, ucp); \
-	    eui64_put(val1, ucp); \
-	    len -= idlen; \
-	} else \
-	    neg = 0; \
-    }
-
-    ADDCIIFACEID(CI_IFACEID, go->neg_ifaceid, go->ourid);
-
-    ADDCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol);
-
-    *lenp -= len;
-}
-
-
-/*
- * ipv6cp_ackci - Ack our CIs.
- *
- * Returns:
- *	0 - Ack was bad.
- *	1 - Ack was good.
- */
-static int
-ipv6cp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    u_short cilen, citype, cishort;
-    eui64_t ifaceid;
-
-    /*
-     * CIs must be in exactly the same order that we sent...
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-
-#define ACKCIVJ(opt, neg, val) \
-    if (neg) { \
-	int vjlen = CILEN_COMPRESS; \
-	if ((len -= vjlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != vjlen || \
-	    citype != opt)  \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != val) \
-	    goto bad; \
-    }
-
-#define ACKCIIFACEID(opt, neg, val1) \
-    if (neg) { \
-	int idlen = CILEN_IFACEID; \
-	if ((len -= idlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != idlen || \
-	    citype != opt) \
-	    goto bad; \
-	eui64_get(ifaceid, p); \
-	if (! eui64_equals(val1, ifaceid)) \
-	    goto bad; \
-    }
-
-    ACKCIIFACEID(CI_IFACEID, go->neg_ifaceid, go->ourid);
-
-    ACKCIVJ(CI_COMPRESSTYPE, go->neg_vj, go->vj_protocol);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    return (1);
-
-bad:
-    IPV6CPDEBUG(("ipv6cp_ackci: received bad Ack!"));
-    return (0);
-}
-
-/*
- * ipv6cp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPV6CP is in the OPENED state.
- *
- * Returns:
- *	0 - Nak was bad.
- *	1 - Nak was good.
- */
-static int
-ipv6cp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    u_char citype, cilen, *next;
-    u_short cishort;
-    eui64_t ifaceid;
-    ipv6cp_options no;		/* options we've seen Naks for */
-    ipv6cp_options try;		/* options to request next time */
-
-    BZERO(&no, sizeof(no));
-    try = *go;
-
-    /*
-     * Any Nak'd CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define NAKCIIFACEID(opt, neg, code) \
-    if (go->neg && \
-	len >= (cilen = CILEN_IFACEID) && \
-	p[1] == cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	eui64_get(ifaceid, p); \
-	no.neg = 1; \
-	code \
-    }
-
-#define NAKCIVJ(opt, neg, code) \
-    if (go->neg && \
-	((cilen = p[1]) == CILEN_COMPRESS) && \
-	len >= cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	no.neg = 1; \
-        code \
-    }
-
-    /*
-     * Accept the peer's idea of {our,his} interface identifier, if different
-     * from our idea, only if the accept_{local,remote} flag is set.
-     */
-    NAKCIIFACEID(CI_IFACEID, neg_ifaceid,
-	      if (go->accept_local) {
-		  while (eui64_iszero(ifaceid) || 
-			 eui64_equals(ifaceid, go->hisid)) /* bad luck */
-		      eui64_magic(ifaceid);
-		  try.ourid = ifaceid;
-		  IPV6CPDEBUG(("local LL address %s", llv6_ntoa(ifaceid)));
-	      }
-	      );
-
-#ifdef IPV6CP_COMP
-    NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
-	    {
-		if (cishort == IPV6CP_COMP) {
-		    try.vj_protocol = cishort;
-		} else {
-		    try.neg_vj = 0;
-		}
-	    }
-	    );
-#else
-    NAKCIVJ(CI_COMPRESSTYPE, neg_vj,
-	    {
-		try.neg_vj = 0;
-	    }
-	    );
-#endif
-
-    /*
-     * There may be remaining CIs, if the peer is requesting negotiation
-     * on an option that we didn't include in our request packet.
-     * If they want to negotiate about interface identifier, we comply.
-     * If they want us to ask for compression, we refuse.
-     */
-    while (len > CILEN_VOID) {
-	GETCHAR(citype, p);
-	GETCHAR(cilen, p);
-	if( (len -= cilen) < 0 )
-	    goto bad;
-	next = p + cilen - 2;
-
-	switch (citype) {
-	case CI_COMPRESSTYPE:
-	    if (go->neg_vj || no.neg_vj ||
-		(cilen != CILEN_COMPRESS))
-		goto bad;
-	    no.neg_vj = 1;
-	    break;
-	case CI_IFACEID:
-	    if (go->neg_ifaceid || no.neg_ifaceid || cilen != CILEN_IFACEID)
-		goto bad;
-	    try.neg_ifaceid = 1;
-	    eui64_get(ifaceid, p);
-	    if (go->accept_local) {
-		while (eui64_iszero(ifaceid) || 
-		       eui64_equals(ifaceid, go->hisid)) /* bad luck */
-		    eui64_magic(ifaceid);
-		try.ourid = ifaceid;
-	    }
-	    no.neg_ifaceid = 1;
-	    break;
-	}
-	p = next;
-    }
-
-    /* If there is still anything left, this packet is bad. */
-    if (len != 0)
-	goto bad;
-
-    /*
-     * OK, the Nak is good.  Now we can update state.
-     */
-    if (f->state != OPENED)
-	*go = try;
-
-    return 1;
-
-bad:
-    IPV6CPDEBUG(("ipv6cp_nakci: received bad Nak!"));
-    return 0;
-}
-
-
-/*
- * ipv6cp_rejci - Reject some of our CIs.
- */
-static int
-ipv6cp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    u_char cilen;
-    u_short cishort;
-    eui64_t ifaceid;
-    ipv6cp_options try;		/* options to request next time */
-
-    try = *go;
-    /*
-     * Any Rejected CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define REJCIIFACEID(opt, neg, val1) \
-    if (go->neg && \
-	len >= (cilen = CILEN_IFACEID) && \
-	p[1] == cilen && \
-	p[0] == opt) { \
-	len -= cilen; \
-	INCPTR(2, p); \
-	eui64_get(ifaceid, p); \
-	/* Check rejected value. */ \
-	if (! eui64_equals(ifaceid, val1)) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-
-#define REJCIVJ(opt, neg, val) \
-    if (go->neg && \
-	p[1] == CILEN_COMPRESS && \
-	len >= p[1] && \
-	p[0] == opt) { \
-	len -= p[1]; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	/* Check rejected value. */  \
-	if (cishort != val) \
-	    goto bad; \
-	try.neg = 0; \
-     }
-
-    REJCIIFACEID(CI_IFACEID, neg_ifaceid, go->ourid);
-
-    REJCIVJ(CI_COMPRESSTYPE, neg_vj, go->vj_protocol);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    /*
-     * Now we can update state.
-     */
-    if (f->state != OPENED)
-	*go = try;
-    return 1;
-
-bad:
-    IPV6CPDEBUG(("ipv6cp_rejci: received bad Reject!"));
-    return 0;
-}
-
-
-/*
- * ipv6cp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately.  If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipv6cp_reqci(f, inp, len, reject_if_disagree)
-    fsm *f;
-    u_char *inp;		/* Requested CIs */
-    int *len;			/* Length of requested CIs */
-    int reject_if_disagree;
-{
-    ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
-    ipv6cp_options *ho = &ipv6cp_hisoptions[f->unit];
-    ipv6cp_options *ao = &ipv6cp_allowoptions[f->unit];
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    u_char *cip, *next;		/* Pointer to current and next CIs */
-    u_short cilen, citype;	/* Parsed len, type */
-    u_short cishort;		/* Parsed short value */
-    eui64_t ifaceid;		/* Parsed interface identifier */
-    int rc = CONFACK;		/* Final packet return code */
-    int orc;			/* Individual option return code */
-    u_char *p;			/* Pointer to next char to parse */
-    u_char *ucp = inp;		/* Pointer to current output char */
-    int l = *len;		/* Length left */
-
-    /*
-     * Reset all his options.
-     */
-    BZERO(ho, sizeof(*ho));
-    
-    /*
-     * Process all his options.
-     */
-    next = inp;
-    while (l) {
-	orc = CONFACK;			/* Assume success */
-	cip = p = next;			/* Remember begining of CI */
-	if (l < 2 ||			/* Not enough data for CI header or */
-	    p[1] < 2 ||			/*  CI length too small or */
-	    p[1] > l) {			/*  CI length too big? */
-	    IPV6CPDEBUG(("ipv6cp_reqci: bad CI length!"));
-	    orc = CONFREJ;		/* Reject bad CI */
-	    cilen = l;			/* Reject till end of packet */
-	    l = 0;			/* Don't loop again */
-	    goto endswitch;
-	}
-	GETCHAR(citype, p);		/* Parse CI type */
-	GETCHAR(cilen, p);		/* Parse CI length */
-	l -= cilen;			/* Adjust remaining length */
-	next += cilen;			/* Step to next CI */
-
-	switch (citype) {		/* Check CI type */
-	case CI_IFACEID:
-	    IPV6CPDEBUG(("ipv6cp: received interface identifier "));
-
-	    if (!ao->neg_ifaceid ||
-		cilen != CILEN_IFACEID) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-
-	    /*
-	     * If he has no interface identifier, or if we both have same 
-	     * identifier then NAK it with new idea.
-	     * In particular, if we don't know his identifier, but he does,
-	     * then accept it.
-	     */
-	    eui64_get(ifaceid, p);
-	    IPV6CPDEBUG(("(%s)", llv6_ntoa(ifaceid)));
-	    if (eui64_iszero(ifaceid) && eui64_iszero(go->ourid)) {
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-	    if (!eui64_iszero(wo->hisid) && 
-		!eui64_equals(ifaceid, wo->hisid) && 
-		eui64_iszero(go->hisid)) {
-		    
-		orc = CONFNAK;
-		ifaceid = wo->hisid;
-		go->hisid = ifaceid;
-		DECPTR(sizeof(ifaceid), p);
-		eui64_put(ifaceid, p);
-	    } else
-	    if (eui64_iszero(ifaceid) || eui64_equals(ifaceid, go->ourid)) {
-		orc = CONFNAK;
-		if (eui64_iszero(go->hisid))	/* first time, try option */
-		    ifaceid = wo->hisid;
-		while (eui64_iszero(ifaceid) || 
-		       eui64_equals(ifaceid, go->ourid)) /* bad luck */
-		    eui64_magic(ifaceid);
-		go->hisid = ifaceid;
-		DECPTR(sizeof(ifaceid), p);
-		eui64_put(ifaceid, p);
-	    }
-
-	    ho->neg_ifaceid = 1;
-	    ho->hisid = ifaceid;
-	    break;
-
-	case CI_COMPRESSTYPE:
-	    IPV6CPDEBUG(("ipv6cp: received COMPRESSTYPE "));
-	    if (!ao->neg_vj ||
-		(cilen != CILEN_COMPRESS)) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETSHORT(cishort, p);
-	    IPV6CPDEBUG(("(%d)", cishort));
-
-#ifdef IPV6CP_COMP
-	    if (!(cishort == IPV6CP_COMP)) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    ho->neg_vj = 1;
-	    ho->vj_protocol = cishort;
-	    break;
-#else
-	    orc = CONFREJ;
-	    break;
-#endif
-
-	default:
-	    orc = CONFREJ;
-	    break;
-	}
-
-endswitch:
-	IPV6CPDEBUG((" (%s)\n", CODENAME(orc)));
-
-	if (orc == CONFACK &&		/* Good CI */
-	    rc != CONFACK)		/*  but prior CI wasnt? */
-	    continue;			/* Don't send this one */
-
-	if (orc == CONFNAK) {		/* Nak this CI? */
-	    if (reject_if_disagree)	/* Getting fed up with sending NAKs? */
-		orc = CONFREJ;		/* Get tough if so */
-	    else {
-		if (rc == CONFREJ)	/* Rejecting prior CI? */
-		    continue;		/* Don't send this one */
-		if (rc == CONFACK) {	/* Ack'd all prior CIs? */
-		    rc = CONFNAK;	/* Not anymore... */
-		    ucp = inp;		/* Backup */
-		}
-	    }
-	}
-
-	if (orc == CONFREJ &&		/* Reject this CI */
-	    rc != CONFREJ) {		/*  but no prior ones? */
-	    rc = CONFREJ;
-	    ucp = inp;			/* Backup */
-	}
-
-	/* Need to move CI? */
-	if (ucp != cip)
-	    BCOPY(cip, ucp, cilen);	/* Move it */
-
-	/* Update output pointer */
-	INCPTR(cilen, ucp);
-    }
-
-    /*
-     * If we aren't rejecting this packet, and we want to negotiate
-     * their identifier and they didn't send their identifier, then we
-     * send a NAK with a CI_IFACEID option appended.  We assume the
-     * input buffer is long enough that we can append the extra
-     * option safely.
-     */
-    if (rc != CONFREJ && !ho->neg_ifaceid &&
-	wo->req_ifaceid && !reject_if_disagree) {
-	if (rc == CONFACK) {
-	    rc = CONFNAK;
-	    ucp = inp;				/* reset pointer */
-	    wo->req_ifaceid = 0;		/* don't ask again */
-	}
-	PUTCHAR(CI_IFACEID, ucp);
-	PUTCHAR(CILEN_IFACEID, ucp);
-	eui64_put(wo->hisid, ucp);
-    }
-
-    *len = ucp - inp;			/* Compute output length */
-    IPV6CPDEBUG(("ipv6cp: returning Configure-%s", CODENAME(rc)));
-    return (rc);			/* Return final code */
-}
-
-
-/*
- * ipv6_check_options - check that any IP-related options are OK,
- * and assign appropriate defaults.
- */
-static void
-ipv6_check_options()
-{
-    ipv6cp_options *wo = &ipv6cp_wantoptions[0];
-
-    if (!ipv6cp_protent.enabled_flag)
-	return;
-
-#if defined(SOL2)
-    /*
-     * Persistent link-local id is only used when user has not explicitly
-     * configure/hard-code the id
-     */
-    if ((wo->use_persistent) && (!wo->opt_local) && (!wo->opt_remote)) {
-
-	/* 
-	 * On systems where there are no Ethernet interfaces used, there
-	 * may be other ways to obtain a persistent id. Right now, it
-	 * will fall back to using magic [see eui64_magic] below when
-	 * an EUI-48 from MAC address can't be obtained. Other possibilities
-	 * include obtaining EEPROM serial numbers, or some other unique
-	 * yet persistent number. On Sparc platforms, this is possible,
-	 * but too bad there's no standards yet for x86 machines.
-	 */
-	if (ether_to_eui64(&wo->ourid)) {
-	    wo->opt_local = 1;
-	}
-    }
-#endif
-
-    if (!wo->opt_local) {	/* init interface identifier */
-	if (wo->use_ip && eui64_iszero(wo->ourid)) {
-	    eui64_setlo32(wo->ourid, ntohl(ipcp_wantoptions[0].ouraddr));
-	    if (!eui64_iszero(wo->ourid))
-		wo->opt_local = 1;
-	}
-	
-	while (eui64_iszero(wo->ourid))
-	    eui64_magic(wo->ourid);
-    }
-
-    if (!wo->opt_remote) {
-	if (wo->use_ip && eui64_iszero(wo->hisid)) {
-	    eui64_setlo32(wo->hisid, ntohl(ipcp_wantoptions[0].hisaddr));
-	    if (!eui64_iszero(wo->hisid))
-		wo->opt_remote = 1;
-	}
-    }
-
-    if (demand && (eui64_iszero(wo->ourid) || eui64_iszero(wo->hisid))) {
-	option_error("local/remote LL address required for demand-dialling\n");
-	exit(1);
-    }
-}
-
-
-/*
- * ipv6_demand_conf - configure the interface as though
- * IPV6CP were up, for use with dial-on-demand.
- */
-static int
-ipv6_demand_conf(u)
-    int u;
-{
-    ipv6cp_options *wo = &ipv6cp_wantoptions[u];
-
-#if defined(__linux__) || defined(SOL2) || (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-#if defined(SOL2)
-    if (!sif6up(u))
-	return 0;
-#else
-    if (!sifup(u))
-	return 0;
-#endif /* defined(SOL2) */
-#endif    
-    if (!sif6addr(u, wo->ourid, wo->hisid))
-	return 0;
-#if !defined(__linux__) && !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-    if (!sifup(u))
-	return 0;
-#endif
-    if (!sifnpmode(u, PPP_IPV6, NPMODE_QUEUE))
-	return 0;
-
-    notice("ipv6_demand_conf");
-    notice("local  LL address %s", llv6_ntoa(wo->ourid));
-    notice("remote LL address %s", llv6_ntoa(wo->hisid));
-
-    return 1;
-}
-
-
-/*
- * ipv6cp_up - IPV6CP has come UP.
- *
- * Configure the IPv6 network interface appropriately and bring it up.
- */
-static void
-ipv6cp_up(f)
-    fsm *f;
-{
-    ipv6cp_options *ho = &ipv6cp_hisoptions[f->unit];
-    ipv6cp_options *go = &ipv6cp_gotoptions[f->unit];
-    ipv6cp_options *wo = &ipv6cp_wantoptions[f->unit];
-
-    IPV6CPDEBUG(("ipv6cp: up"));
-
-    /*
-     * We must have a non-zero LL address for both ends of the link.
-     */
-    if (!ho->neg_ifaceid)
-	ho->hisid = wo->hisid;
-
-    if(!no_ifaceid_neg) {
-	if (eui64_iszero(ho->hisid)) {
-	    error("Could not determine remote LL address");
-	    ipv6cp_close(f->unit, "Could not determine remote LL address");
-	    return;
-	}
-	if (eui64_iszero(go->ourid)) {
-	    error("Could not determine local LL address");
-	    ipv6cp_close(f->unit, "Could not determine local LL address");
-	    return;
-	}
-	if (eui64_equals(go->ourid, ho->hisid)) {
-	    error("local and remote LL addresses are equal");
-	    ipv6cp_close(f->unit, "local and remote LL addresses are equal");
-	    return;
-	}
-    }
-    script_setenv("LLLOCAL", llv6_ntoa(go->ourid), 0);
-    script_setenv("LLREMOTE", llv6_ntoa(ho->hisid), 0);
-
-#ifdef IPV6CP_COMP
-    /* set tcp compression */
-    sif6comp(f->unit, ho->neg_vj);
-#endif
-
-    /*
-     * If we are doing dial-on-demand, the interface is already
-     * configured, so we put out any saved-up packets, then set the
-     * interface to pass IPv6 packets.
-     */
-    if (demand) {
-	if (! eui64_equals(go->ourid, wo->ourid) || 
-	    ! eui64_equals(ho->hisid, wo->hisid)) {
-	    if (! eui64_equals(go->ourid, wo->ourid))
-		warn("Local LL address changed to %s", 
-		     llv6_ntoa(go->ourid));
-	    if (! eui64_equals(ho->hisid, wo->hisid))
-		warn("Remote LL address changed to %s", 
-		     llv6_ntoa(ho->hisid));
-	    ipv6cp_clear_addrs(f->unit, go->ourid, ho->hisid);
-
-	    /* Set the interface to the new addresses */
-	    if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
-		if (debug)
-		    warn("sif6addr failed");
-		ipv6cp_close(f->unit, "Interface configuration failed");
-		return;
-	    }
-
-	}
-	demand_rexmit(PPP_IPV6);
-	sifnpmode(f->unit, PPP_IPV6, NPMODE_PASS);
-
-    } else {
-	/*
-	 * Set LL addresses
-	 */
-#if !defined(__linux__) && !defined(SOL2) && !(defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-	if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
-	    if (debug)
-		warn("sif6addr failed");
-	    ipv6cp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif
-
-	/* bring the interface up for IPv6 */
-#if defined(SOL2)
-	if (!sif6up(f->unit)) {
-	    if (debug)
-		warn("sifup failed (IPV6)");
-	    ipv6cp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#else
-	if (!sifup(f->unit)) {
-	    if (debug)
-		warn("sifup failed (IPV6)");
-	    ipv6cp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif /* defined(SOL2) */
-
-#if defined(__linux__) || defined(SOL2) || (defined(SVR4) && (defined(SNI) || defined(__USLC__)))
-	if (!sif6addr(f->unit, go->ourid, ho->hisid)) {
-	    if (debug)
-		warn("sif6addr failed");
-	    ipv6cp_close(f->unit, "Interface configuration failed");
-	    return;
-	}
-#endif
-	sifnpmode(f->unit, PPP_IPV6, NPMODE_PASS);
-
-	notice("local  LL address %s", llv6_ntoa(go->ourid));
-	notice("remote LL address %s", llv6_ntoa(ho->hisid));
-    }
-
-    np_up(f->unit, PPP_IPV6);
-    ipv6cp_is_up = 1;
-
-    /*
-     * Execute the ipv6-up script, like this:
-     *	/etc/ppp/ipv6-up interface tty speed local-LL remote-LL
-     */
-    if (ipv6cp_script_state == s_down && ipv6cp_script_pid == 0) {
-	ipv6cp_script_state = s_up;
-	ipv6cp_script(_PATH_IPV6UP);
-    }
-}
-
-
-/*
- * ipv6cp_down - IPV6CP has gone DOWN.
- *
- * Take the IPv6 network interface down, clear its addresses
- * and delete routes through it.
- */
-static void
-ipv6cp_down(f)
-    fsm *f;
-{
-    IPV6CPDEBUG(("ipv6cp: down"));
-    update_link_stats(f->unit);
-    if (ipv6cp_is_up) {
-	ipv6cp_is_up = 0;
-	np_down(f->unit, PPP_IPV6);
-    }
-#ifdef IPV6CP_COMP
-    sif6comp(f->unit, 0);
-#endif
-
-    /*
-     * If we are doing dial-on-demand, set the interface
-     * to queue up outgoing packets (for now).
-     */
-    if (demand) {
-	sifnpmode(f->unit, PPP_IPV6, NPMODE_QUEUE);
-    } else {
-	sifnpmode(f->unit, PPP_IPV6, NPMODE_DROP);
-#if !defined(__linux__) && !(defined(SVR4) && (defined(SNI) || defined(__USLC)))
-#if defined(SOL2)
-	sif6down(f->unit);
-#else
-	sifdown(f->unit);
-#endif /* defined(SOL2) */
-#endif
-	ipv6cp_clear_addrs(f->unit, 
-			   ipv6cp_gotoptions[f->unit].ourid,
-			   ipv6cp_hisoptions[f->unit].hisid);
-#if defined(__linux__) || (defined(SVR4) && (defined(SNI) || defined(__USLC)))
-	sifdown(f->unit);
-#endif
-    }
-
-    /* Execute the ipv6-down script */
-    if (ipv6cp_script_state == s_up && ipv6cp_script_pid == 0) {
-	ipv6cp_script_state = s_down;
-	ipv6cp_script(_PATH_IPV6DOWN);
-    }
-}
-
-
-/*
- * ipv6cp_clear_addrs() - clear the interface addresses, routes,
- * proxy neighbour discovery entries, etc.
- */
-static void
-ipv6cp_clear_addrs(unit, ourid, hisid)
-    int unit;
-    eui64_t ourid;
-    eui64_t hisid;
-{
-    cif6addr(unit, ourid, hisid);
-}
-
-
-/*
- * ipv6cp_finished - possibly shut down the lower layers.
- */
-static void
-ipv6cp_finished(f)
-    fsm *f;
-{
-    np_finished(f->unit, PPP_IPV6);
-}
-
-
-/*
- * ipv6cp_script_done - called when the ipv6-up or ipv6-down script
- * has finished.
- */
-static void
-ipv6cp_script_done(arg)
-    void *arg;
-{
-    ipv6cp_script_pid = 0;
-    switch (ipv6cp_script_state) {
-    case s_up:
-	if (ipv6cp_fsm[0].state != OPENED) {
-	    ipv6cp_script_state = s_down;
-	    ipv6cp_script(_PATH_IPV6DOWN);
-	}
-	break;
-    case s_down:
-	if (ipv6cp_fsm[0].state == OPENED) {
-	    ipv6cp_script_state = s_up;
-	    ipv6cp_script(_PATH_IPV6UP);
-	}
-	break;
-    }
-}
-
-
-/*
- * ipv6cp_script - Execute a script with arguments
- * interface-name tty-name speed local-LL remote-LL.
- */
-static void
-ipv6cp_script(script)
-    char *script;
-{
-    char strspeed[32], strlocal[32], strremote[32];
-    char *argv[8];
-
-    sprintf(strspeed, "%d", baud_rate);
-    strcpy(strlocal, llv6_ntoa(ipv6cp_gotoptions[0].ourid));
-    strcpy(strremote, llv6_ntoa(ipv6cp_hisoptions[0].hisid));
-
-    argv[0] = script;
-    argv[1] = ifname;
-    argv[2] = devnam;
-    argv[3] = strspeed;
-    argv[4] = strlocal;
-    argv[5] = strremote;
-    argv[6] = ipparam;
-    argv[7] = NULL;
-
-    ipv6cp_script_pid = run_program(script, argv, 0, ipv6cp_script_done, NULL);
-}
-
-/*
- * ipv6cp_printpkt - print the contents of an IPV6CP packet.
- */
-static char *ipv6cp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipv6cp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len, olen;
-    u_char *pstart, *optend;
-    u_short cishort;
-    eui64_t ifaceid;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ipv6cp_codenames) / sizeof(char *))
-	printer(arg, " %s", ipv6cp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print option list */
-	while (len >= 2) {
-	    GETCHAR(code, p);
-	    GETCHAR(olen, p);
-	    p -= 2;
-	    if (olen < 2 || olen > len) {
-		break;
-	    }
-	    printer(arg, " <");
-	    len -= olen;
-	    optend = p + olen;
-	    switch (code) {
-	    case CI_COMPRESSTYPE:
-		if (olen >= CILEN_COMPRESS) {
-		    p += 2;
-		    GETSHORT(cishort, p);
-		    printer(arg, "compress ");
-		    printer(arg, "0x%x", cishort);
-		}
-		break;
-	    case CI_IFACEID:
-		if (olen == CILEN_IFACEID) {
-		    p += 2;
-		    eui64_get(ifaceid, p);
-		    printer(arg, "addr %s", llv6_ntoa(ifaceid));
-		}
-		break;
-	    }
-	    while (p < optend) {
-		GETCHAR(code, p);
-		printer(arg, " %.2x", code);
-	    }
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    printer(arg, " ");
-	    print_string((char *)p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-
-    return p - pstart;
-}
-
-/*
- * ipv6_active_pkt - see if this IP packet is worth bringing the link up for.
- * We don't bring the link up for IP fragments or for TCP FIN packets
- * with no data.
- */
-#define IP6_HDRLEN	40	/* bytes */
-#define IP6_NHDR_FRAG	44	/* fragment IPv6 header */
-#define IPPROTO_TCP	6
-#define TCP_HDRLEN	20
-#define TH_FIN		0x01
-
-/*
- * We use these macros because the IP header may be at an odd address,
- * and some compilers might use word loads to get th_off or ip_hl.
- */
-
-#define get_ip6nh(x)	(((unsigned char *)(x))[6])
-#define get_tcpoff(x)	(((unsigned char *)(x))[12] >> 4)
-#define get_tcpflags(x)	(((unsigned char *)(x))[13])
-
-static int
-ipv6_active_pkt(pkt, len)
-    u_char *pkt;
-    int len;
-{
-    u_char *tcp;
-
-    len -= PPP_HDRLEN;
-    pkt += PPP_HDRLEN;
-    if (len < IP6_HDRLEN)
-	return 0;
-    if (get_ip6nh(pkt) == IP6_NHDR_FRAG)
-	return 0;
-    if (get_ip6nh(pkt) != IPPROTO_TCP)
-	return 1;
-    if (len < IP6_HDRLEN + TCP_HDRLEN)
-	return 0;
-    tcp = pkt + IP6_HDRLEN;
-    if ((get_tcpflags(tcp) & TH_FIN) != 0 && len == IP6_HDRLEN + get_tcpoff(tcp) * 4)
-	return 0;
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/ipv6cp.h b/mdk-stage1/ppp/pppd/ipv6cp.h
deleted file mode 100644
index 60d366eb3..000000000
--- a/mdk-stage1/ppp/pppd/ipv6cp.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
-    ipv6cp.h - PPP IPV6 Control Protocol.
-    Copyright (C) 1999  Tommi Komulainen <Tommi.Komulainen@iki.fi>
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms.  The name of the author may not be
-    used to endorse or promote products derived from this software
-    without specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-*/
-
-/*  Original version, based on RFC2023 :
-
-    Copyright (c) 1995, 1996, 1997 Francis.Dupont@inria.fr, INRIA Rocquencourt,
-    Alain.Durand@imag.fr, IMAG,
-    Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
-    Copyright (c) 1998, 1999 Francis.Dupont@inria.fr, GIE DYADE,
-    Alain.Durand@imag.fr, IMAG,
-    Jean-Luc.Richier@imag.fr, IMAG-LSR.
-
-    Ce travail a �t� fait au sein du GIE DYADE (Groupement d'Int�r�t
-    �conomique ayant pour membres BULL S.A. et l'INRIA).
-
-    Ce logiciel informatique est disponible aux conditions
-    usuelles dans la recherche, c'est-�-dire qu'il peut
-    �tre utilis�, copi�, modifi�, distribu� � l'unique
-    condition que ce texte soit conserv� afin que
-    l'origine de ce logiciel soit reconnue.
-
-    Le nom de l'Institut National de Recherche en Informatique
-    et en Automatique (INRIA), de l'IMAG, ou d'une personne morale
-    ou physique ayant particip� � l'�laboration de ce logiciel ne peut
-    �tre utilis� sans son accord pr�alable explicite.
-
-    Ce logiciel est fourni tel quel sans aucune garantie,
-    support ou responsabilit� d'aucune sorte.
-    Ce logiciel est d�riv� de sources d'origine
-    "University of California at Berkeley" et
-    "Digital Equipment Corporation" couvertes par des copyrights.
-
-    L'Institut d'Informatique et de Math�matiques Appliqu�es de Grenoble (IMAG)
-    est une f�d�ration d'unit�s mixtes de recherche du CNRS, de l'Institut National
-    Polytechnique de Grenoble et de l'Universit� Joseph Fourier regroupant
-    sept laboratoires dont le laboratoire Logiciels, Syst�mes, R�seaux (LSR).
-
-    This work has been done in the context of GIE DYADE (joint R & D venture
-    between BULL S.A. and INRIA).
-
-    This software is available with usual "research" terms
-    with the aim of retain credits of the software. 
-    Permission to use, copy, modify and distribute this software for any
-    purpose and without fee is hereby granted, provided that the above
-    copyright notice and this permission notice appear in all copies,
-    and the name of INRIA, IMAG, or any contributor not be used in advertising
-    or publicity pertaining to this material without the prior explicit
-    permission. The software is provided "as is" without any
-    warranties, support or liabilities of any kind.
-    This software is derived from source code from
-    "University of California at Berkeley" and
-    "Digital Equipment Corporation" protected by copyrights.
-
-    Grenoble's Institute of Computer Science and Applied Mathematics (IMAG)
-    is a federation of seven research units funded by the CNRS, National
-    Polytechnic Institute of Grenoble and University Joseph Fourier.
-    The research unit in Software, Systems, Networks (LSR) is member of IMAG.
-*/
-
-/*
- * Derived from :
- *
- *
- * ipcp.h - IP Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_IFACEID	1	/* Interface Identifier */
-#define CI_COMPRESSTYPE	2	/* Compression Type     */
-
-/* No compression types yet defined.
- *#define IPV6CP_COMP	0x004f
- */
-typedef struct ipv6cp_options {
-    int neg_ifaceid;		/* Negotiate interface identifier? */
-    int req_ifaceid;		/* Ask peer to send interface identifier? */
-    int accept_local;		/* accept peer's value for iface id? */
-    int opt_local;		/* ourtoken set by option */
-    int opt_remote;		/* histoken set by option */
-    int use_ip;			/* use IP as interface identifier */
-#if defined(SOL2)
-    int use_persistent;		/* use uniquely persistent value for address */
-#endif /* defined(SOL2) */
-    int neg_vj;			/* Van Jacobson Compression? */
-    u_short vj_protocol;	/* protocol value to use in VJ option */
-    eui64_t ourid, hisid;	/* Interface identifiers */
-} ipv6cp_options;
-
-extern fsm ipv6cp_fsm[];
-extern ipv6cp_options ipv6cp_wantoptions[];
-extern ipv6cp_options ipv6cp_gotoptions[];
-extern ipv6cp_options ipv6cp_allowoptions[];
-extern ipv6cp_options ipv6cp_hisoptions[];
-
-extern struct protent ipv6cp_protent;
diff --git a/mdk-stage1/ppp/pppd/ipxcp.c b/mdk-stage1/ppp/pppd/ipxcp.c
deleted file mode 100644
index f9a12b934..000000000
--- a/mdk-stage1/ppp/pppd/ipxcp.c
+++ /dev/null
@@ -1,1570 +0,0 @@
-/*
- * ipxcp.c - PPP IPX Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifdef IPX_CHANGE
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipxcp.h"
-#include "pathnames.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-/* global vars */
-ipxcp_options ipxcp_wantoptions[NUM_PPP];	/* Options that we want to request */
-ipxcp_options ipxcp_gotoptions[NUM_PPP];	/* Options that peer ack'd */
-ipxcp_options ipxcp_allowoptions[NUM_PPP];	/* Options we allow peer to request */
-ipxcp_options ipxcp_hisoptions[NUM_PPP];	/* Options that we ack'd */
-
-#define wo (&ipxcp_wantoptions[0])
-#define ao (&ipxcp_allowoptions[0])
-#define go (&ipxcp_gotoptions[0])
-#define ho (&ipxcp_hisoptions[0])
-
-/*
- * Callbacks for fsm code.  (CI = Configuration Information)
- */
-static void ipxcp_resetci __P((fsm *));	/* Reset our CI */
-static int  ipxcp_cilen __P((fsm *));		/* Return length of our CI */
-static void ipxcp_addci __P((fsm *, u_char *, int *)); /* Add our CI */
-static int  ipxcp_ackci __P((fsm *, u_char *, int));	/* Peer ack'd our CI */
-static int  ipxcp_nakci __P((fsm *, u_char *, int));	/* Peer nak'd our CI */
-static int  ipxcp_rejci __P((fsm *, u_char *, int));	/* Peer rej'd our CI */
-static int  ipxcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv CI */
-static void ipxcp_up __P((fsm *));		/* We're UP */
-static void ipxcp_down __P((fsm *));		/* We're DOWN */
-static void ipxcp_finished __P((fsm *));	/* Don't need lower layer */
-static void ipxcp_script __P((fsm *, char *)); /* Run an up/down script */
-
-fsm ipxcp_fsm[NUM_PPP];		/* IPXCP fsm structure */
-
-static fsm_callbacks ipxcp_callbacks = { /* IPXCP callback routines */
-    ipxcp_resetci,		/* Reset our Configuration Information */
-    ipxcp_cilen,		/* Length of our Configuration Information */
-    ipxcp_addci,		/* Add our Configuration Information */
-    ipxcp_ackci,		/* ACK our Configuration Information */
-    ipxcp_nakci,		/* NAK our Configuration Information */
-    ipxcp_rejci,		/* Reject our Configuration Information */
-    ipxcp_reqci,		/* Request peer's Configuration Information */
-    ipxcp_up,			/* Called when fsm reaches OPENED state */
-    ipxcp_down,			/* Called when fsm leaves OPENED state */
-    NULL,			/* Called when we want the lower layer up */
-    ipxcp_finished,		/* Called when we want the lower layer down */
-    NULL,			/* Called when Protocol-Reject received */
-    NULL,			/* Retransmission is necessary */
-    NULL,			/* Called to handle protocol-specific codes */
-    "IPXCP"			/* String name of protocol */
-};
-
-/*
- * Command-line options.
- */
-static int setipxnode __P((char **));
-static void printipxnode __P((option_t *,
-			      void (*)(void *, char *, ...), void *));
-static int setipxname __P((char **));
-
-static option_t ipxcp_option_list[] = {
-    { "ipx", o_bool, &ipxcp_protent.enabled_flag,
-      "Enable IPXCP (and IPX)", OPT_PRIO | 1 },
-    { "+ipx", o_bool, &ipxcp_protent.enabled_flag,
-      "Enable IPXCP (and IPX)", OPT_PRIOSUB | OPT_ALIAS | 1 },
-    { "noipx", o_bool, &ipxcp_protent.enabled_flag,
-      "Disable IPXCP (and IPX)", OPT_PRIOSUB },
-    { "-ipx", o_bool, &ipxcp_protent.enabled_flag,
-      "Disable IPXCP (and IPX)", OPT_PRIOSUB | OPT_ALIAS },
-
-    { "ipx-network", o_uint32, &ipxcp_wantoptions[0].our_network,
-      "Set our IPX network number", OPT_PRIO, &ipxcp_wantoptions[0].neg_nn },
-
-    { "ipxcp-accept-network", o_bool, &ipxcp_wantoptions[0].accept_network,
-      "Accept peer IPX network number", 1,
-      &ipxcp_allowoptions[0].accept_network },
-
-    { "ipx-node", o_special, (void *)setipxnode,
-      "Set IPX node number", OPT_A2PRINTER, (void *)printipxnode },
-
-    { "ipxcp-accept-local", o_bool, &ipxcp_wantoptions[0].accept_local,
-      "Accept our IPX address", 1,
-      &ipxcp_allowoptions[0].accept_local },
-
-    { "ipxcp-accept-remote", o_bool, &ipxcp_wantoptions[0].accept_remote,
-      "Accept peer's IPX address", 1,
-      &ipxcp_allowoptions[0].accept_remote },
-
-    { "ipx-routing", o_int, &ipxcp_wantoptions[0].router,
-      "Set IPX routing proto number", OPT_PRIO,
-      &ipxcp_wantoptions[0].neg_router },
-
-    { "ipx-router-name", o_special, setipxname,
-      "Set IPX router name", OPT_PRIO | OPT_A2STRVAL | OPT_STATIC,
-       &ipxcp_wantoptions[0].name },
-
-    { "ipxcp-restart", o_int, &ipxcp_fsm[0].timeouttime,
-      "Set timeout for IPXCP", OPT_PRIO },
-    { "ipxcp-max-terminate", o_int, &ipxcp_fsm[0].maxtermtransmits,
-      "Set max #xmits for IPXCP term-reqs", OPT_PRIO },
-    { "ipxcp-max-configure", o_int, &ipxcp_fsm[0].maxconfreqtransmits,
-      "Set max #xmits for IPXCP conf-reqs", OPT_PRIO },
-    { "ipxcp-max-failure", o_int, &ipxcp_fsm[0].maxnakloops,
-      "Set max #conf-naks for IPXCP", OPT_PRIO },
-
-    { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-
-static void ipxcp_init __P((int));
-static void ipxcp_open __P((int));
-static void ipxcp_close __P((int, char *));
-static void ipxcp_lowerup __P((int));
-static void ipxcp_lowerdown __P((int));
-static void ipxcp_input __P((int, u_char *, int));
-static void ipxcp_protrej __P((int));
-static int  ipxcp_printpkt __P((u_char *, int,
-				void (*) __P((void *, char *, ...)), void *));
-
-struct protent ipxcp_protent = {
-    PPP_IPXCP,
-    ipxcp_init,
-    ipxcp_input,
-    ipxcp_protrej,
-    ipxcp_lowerup,
-    ipxcp_lowerdown,
-    ipxcp_open,
-    ipxcp_close,
-    ipxcp_printpkt,
-    NULL,
-    0,
-    "IPXCP",
-    "IPX",
-    ipxcp_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-/*
- * Lengths of configuration options.
- */
-
-#define CILEN_VOID	2
-#define CILEN_COMPLETE	2	/* length of complete option */
-#define CILEN_NETN	6	/* network number length option */
-#define CILEN_NODEN	8	/* node number length option */
-#define CILEN_PROTOCOL	4	/* Minimum length of routing protocol */
-#define CILEN_NAME	3	/* Minimum length of router name */
-#define CILEN_COMPRESS	4	/* Minimum length of compression protocol */
-
-#define CODENAME(x)	((x) == CONFACK ? "ACK" : \
-			 (x) == CONFNAK ? "NAK" : "REJ")
-
-static int ipxcp_is_up;
-
-static char *ipx_ntoa __P((u_int32_t));
-
-/* Used in printing the node number */
-#define NODE(base) base[0], base[1], base[2], base[3], base[4], base[5]
-
-/* Used to generate the proper bit mask */
-#define BIT(num)   (1 << (num))
-
-/*
- * Convert from internal to external notation
- */
-
-static short int
-to_external(internal)
-short int internal;
-{
-    short int  external;
-
-    if (internal & BIT(IPX_NONE) )
-        external = IPX_NONE;
-    else
-        external = RIP_SAP;
-
-    return external;
-}
-
-/*
- * Make a string representation of a network IP address.
- */
-
-static char *
-ipx_ntoa(ipxaddr)
-u_int32_t ipxaddr;
-{
-    static char b[64];
-    slprintf(b, sizeof(b), "%x", ipxaddr);
-    return b;
-}
-
-
-static u_char *
-setipxnodevalue(src,dst)
-u_char *src, *dst;
-{
-    int indx;
-    int item;
-
-    for (;;) {
-        if (!isxdigit (*src))
-	    break;
-	
-	for (indx = 0; indx < 5; ++indx) {
-	    dst[indx] <<= 4;
-	    dst[indx] |= (dst[indx + 1] >> 4) & 0x0F;
-	}
-
-	item = toupper (*src) - '0';
-	if (item > 9)
-	    item -= 7;
-
-	dst[5] = (dst[5] << 4) | item;
-	++src;
-    }
-    return src;
-}
-
-static int ipx_prio_our, ipx_prio_his;
-
-static int
-setipxnode(argv)
-    char **argv;
-{
-    char *end;
-    int have_his = 0;
-    u_char our_node[6];
-    u_char his_node[6];
-
-    memset (our_node, 0, 6);
-    memset (his_node, 0, 6);
-
-    end = setipxnodevalue (*argv, our_node);
-    if (*end == ':') {
-	have_his = 1;
-	end = setipxnodevalue (++end, his_node);
-    }
-
-    if (*end == '\0') {
-        ipxcp_wantoptions[0].neg_node = 1;
-	if (option_priority >= ipx_prio_our) {
-	    memcpy(&ipxcp_wantoptions[0].our_node[0], our_node, 6);
-	    ipx_prio_our = option_priority;
-	}
-	if (have_his && option_priority >= ipx_prio_his) {
-	    memcpy(&ipxcp_wantoptions[0].his_node[0], his_node, 6);
-	    ipx_prio_his = option_priority;
-	}
-        return 1;
-    }
-
-    option_error("invalid parameter '%s' for ipx-node option", *argv);
-    return 0;
-}
-
-static void
-printipxnode(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	unsigned char *p;
-
-	p = ipxcp_wantoptions[0].our_node;
-	if (ipx_prio_our)
-		printer(arg, "%.2x%.2x%.2x%.2x%.2x%.2x",
-			p[0], p[1], p[2], p[3], p[4], p[5]);
-	printer(arg, ":");
-	p = ipxcp_wantoptions[0].his_node;
-	if (ipx_prio_his)
-		printer(arg, "%.2x%.2x%.2x%.2x%.2x%.2x",
-			p[0], p[1], p[2], p[3], p[4], p[5]);
-}
-
-static int
-setipxname (argv)
-    char **argv;
-{
-    char *dest = ipxcp_wantoptions[0].name;
-    char *src  = *argv;
-    int  count;
-    char ch;
-
-    ipxcp_wantoptions[0].neg_name  = 1;
-    ipxcp_allowoptions[0].neg_name = 1;
-    memset (dest, '\0', sizeof (ipxcp_wantoptions[0].name));
-
-    count = 0;
-    while (*src) {
-        ch = *src++;
-	if (! isalnum (ch) && ch != '_') {
-	    option_error("IPX router name must be alphanumeric or _");
-	    return 0;
-	}
-
-	if (count >= sizeof (ipxcp_wantoptions[0].name) - 1) {
-	    option_error("IPX router name is limited to %d characters",
-			 sizeof (ipxcp_wantoptions[0].name) - 1);
-	    return 0;
-	}
-
-	dest[count++] = toupper (ch);
-    }
-    dest[count] = 0;
-
-    return 1;
-}
-
-/*
- * ipxcp_init - Initialize IPXCP.
- */
-static void
-ipxcp_init(unit)
-    int unit;
-{
-    fsm *f = &ipxcp_fsm[unit];
-
-    f->unit	 = unit;
-    f->protocol	 = PPP_IPXCP;
-    f->callbacks = &ipxcp_callbacks;
-    fsm_init(&ipxcp_fsm[unit]);
-
-    memset (wo->name,	  0, sizeof (wo->name));
-    memset (wo->our_node, 0, sizeof (wo->our_node));
-    memset (wo->his_node, 0, sizeof (wo->his_node));
-
-    wo->neg_nn	       = 1;
-    wo->neg_complete   = 1;
-    wo->network	       = 0;
-
-    ao->neg_node       = 1;
-    ao->neg_nn	       = 1;
-    ao->neg_name       = 1;
-    ao->neg_complete   = 1;
-    ao->neg_router     = 1;
-
-    ao->accept_local   = 0;
-    ao->accept_remote  = 0;
-    ao->accept_network = 0;
-
-    wo->tried_rip      = 0;
-    wo->tried_nlsp     = 0;
-}
-
-/*
- * Copy the node number
- */
-
-static void
-copy_node (src, dst)
-u_char *src, *dst;
-{
-    memcpy (dst, src, sizeof (ipxcp_wantoptions[0].our_node));
-}
-
-/*
- * Compare node numbers
- */
-
-static int
-compare_node (src, dst)
-u_char *src, *dst;
-{
-    return memcmp (dst, src, sizeof (ipxcp_wantoptions[0].our_node)) == 0;
-}
-
-/*
- * Is the node number zero?
- */
-
-static int
-zero_node (node)
-u_char *node;
-{
-    int indx;
-    for (indx = 0; indx < sizeof (ipxcp_wantoptions[0].our_node); ++indx)
-	if (node [indx] != 0)
-	    return 0;
-    return 1;
-}
-
-/*
- * Increment the node number
- */
-
-static void
-inc_node (node)
-u_char *node;
-{
-    u_char   *outp;
-    u_int32_t magic_num;
-
-    outp      = node;
-    magic_num = magic();
-    *outp++   = '\0';
-    *outp++   = '\0';
-    PUTLONG (magic_num, outp);
-}
-
-/*
- * ipxcp_open - IPXCP is allowed to come up.
- */
-static void
-ipxcp_open(unit)
-    int unit;
-{
-    fsm_open(&ipxcp_fsm[unit]);
-}
-
-/*
- * ipxcp_close - Take IPXCP down.
- */
-static void
-ipxcp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    fsm_close(&ipxcp_fsm[unit], reason);
-}
-
-
-/*
- * ipxcp_lowerup - The lower layer is up.
- */
-static void
-ipxcp_lowerup(unit)
-    int unit;
-{
-    fsm_lowerup(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_lowerdown - The lower layer is down.
- */
-static void
-ipxcp_lowerdown(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_input - Input IPXCP packet.
- */
-static void
-ipxcp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm_input(&ipxcp_fsm[unit], p, len);
-}
-
-
-/*
- * ipxcp_protrej - A Protocol-Reject was received for IPXCP.
- *
- * Pretend the lower layer went down, so we shut up.
- */
-static void
-ipxcp_protrej(unit)
-    int unit;
-{
-    fsm_lowerdown(&ipxcp_fsm[unit]);
-}
-
-
-/*
- * ipxcp_resetci - Reset our CI.
- */
-static void
-ipxcp_resetci(f)
-    fsm *f;
-{
-    wo->req_node = wo->neg_node && ao->neg_node;
-    wo->req_nn	 = wo->neg_nn	&& ao->neg_nn;
-
-    if (wo->our_network == 0) {
-	wo->neg_node	   = 1;
-	ao->accept_network = 1;
-    }
-/*
- * If our node number is zero then change it.
- */
-    if (zero_node (wo->our_node)) {
-	inc_node (wo->our_node);
-	ao->accept_local = 1;
-	wo->neg_node	 = 1;
-    }
-/*
- * If his node number is zero then change it.
- */
-    if (zero_node (wo->his_node)) {
-	inc_node (wo->his_node);
-	ao->accept_remote = 1;
-    }
-/*
- * If no routing agent was specified then we do RIP/SAP according to the
- * RFC documents. If you have specified something then OK. Otherwise, we
- * do RIP/SAP.
- */
-    if (ao->router == 0) {
-	ao->router |= BIT(RIP_SAP);
-	wo->router |= BIT(RIP_SAP);
-    }
-
-    /* Always specify a routing protocol unless it was REJected. */
-    wo->neg_router = 1;
-/*
- * Start with these default values
- */
-    *go = *wo;
-}
-
-/*
- * ipxcp_cilen - Return length of our CI.
- */
-
-static int
-ipxcp_cilen(f)
-    fsm *f;
-{
-    int len;
-
-    len	 = go->neg_nn	    ? CILEN_NETN     : 0;
-    len += go->neg_node	    ? CILEN_NODEN    : 0;
-    len += go->neg_name	    ? CILEN_NAME + strlen (go->name) - 1 : 0;
-
-    /* RFC says that defaults should not be included. */
-    if (go->neg_router && to_external(go->router) != RIP_SAP)
-        len += CILEN_PROTOCOL;
-
-    return (len);
-}
-
-
-/*
- * ipxcp_addci - Add our desired CIs to a packet.
- */
-static void
-ipxcp_addci(f, ucp, lenp)
-    fsm *f;
-    u_char *ucp;
-    int *lenp;
-{
-/*
- * Add the options to the record.
- */
-    if (go->neg_nn) {
-	PUTCHAR (IPX_NETWORK_NUMBER, ucp);
-	PUTCHAR (CILEN_NETN, ucp);
-	PUTLONG (go->our_network, ucp);
-    }
-
-    if (go->neg_node) {
-	int indx;
-	PUTCHAR (IPX_NODE_NUMBER, ucp);
-	PUTCHAR (CILEN_NODEN, ucp);
-	for (indx = 0; indx < sizeof (go->our_node); ++indx)
-	    PUTCHAR (go->our_node[indx], ucp);
-    }
-
-    if (go->neg_name) {
-	int cilen = strlen (go->name);
-	int indx;
-	PUTCHAR (IPX_ROUTER_NAME, ucp);
-	PUTCHAR (CILEN_NAME + cilen - 1, ucp);
-	for (indx = 0; indx < cilen; ++indx)
-	    PUTCHAR (go->name [indx], ucp);
-    }
-
-    if (go->neg_router) {
-        short external = to_external (go->router);
-	if (external != RIP_SAP) {
-	    PUTCHAR  (IPX_ROUTER_PROTOCOL, ucp);
-	    PUTCHAR  (CILEN_PROTOCOL,      ucp);
-	    PUTSHORT (external,            ucp);
-	}
-    }
-}
-
-/*
- * ipxcp_ackci - Ack our CIs.
- *
- * Returns:
- *	0 - Ack was bad.
- *	1 - Ack was good.
- */
-static int
-ipxcp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    u_short cilen, citype, cishort;
-    u_char cichar;
-    u_int32_t cilong;
-
-#define ACKCIVOID(opt, neg) \
-    if (neg) { \
-	if ((len -= CILEN_VOID) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_VOID || \
-	    citype != opt) \
-	    break; \
-    }
-
-#define ACKCICOMPLETE(opt,neg)	ACKCIVOID(opt, neg)
-
-#define ACKCICHARS(opt, neg, val, cnt) \
-    if (neg) { \
-	int indx, count = cnt; \
-	len -= (count + 2); \
-	if (len < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != (count + 2) || \
-	    citype != opt) \
-	    break; \
-	for (indx = 0; indx < count; ++indx) {\
-	    GETCHAR(cichar, p); \
-	    if (cichar != ((u_char *) &val)[indx]) \
-	       break; \
-	}\
-	if (indx != count) \
-	    break; \
-    }
-
-#define ACKCINODE(opt,neg,val) ACKCICHARS(opt,neg,val,sizeof(val))
-#define ACKCINAME(opt,neg,val) ACKCICHARS(opt,neg,val,strlen(val))
-
-#define ACKCINETWORK(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_NETN) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_NETN || \
-	    citype != opt) \
-	    break; \
-	GETLONG(cilong, p); \
-	if (cilong != val) \
-	    break; \
-    }
-
-#define ACKCIPROTO(opt, neg, val) \
-    if (neg) { \
-	if (len < 2) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_PROTOCOL || citype != opt) \
-	    break; \
-	len -= cilen; \
-	if (len < 0) \
-	    break; \
-	GETSHORT(cishort, p); \
-	if (cishort != to_external (val) || cishort == RIP_SAP) \
-	    break; \
-      }
-/*
- * Process the ACK frame in the order in which the frame was assembled
- */
-    do {
-	ACKCINETWORK  (IPX_NETWORK_NUMBER,  go->neg_nn,	    go->our_network);
-	ACKCINODE     (IPX_NODE_NUMBER,	    go->neg_node,   go->our_node);
-	ACKCINAME     (IPX_ROUTER_NAME,	    go->neg_name,   go->name);
-	if (len > 0)
-		ACKCIPROTO    (IPX_ROUTER_PROTOCOL, go->neg_router, go->router);
-/*
- * This is the end of the record.
- */
-	if (len == 0)
-	    return (1);
-    } while (0);
-/*
- * The frame is invalid
- */
-    IPXCPDEBUG(("ipxcp_ackci: received bad Ack!"));
-    return (0);
-}
-
-/*
- * ipxcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if IPXCP is in the OPENED state.
- *
- * Returns:
- *	0 - Nak was bad.
- *	1 - Nak was good.
- */
-
-static int
-ipxcp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    u_char citype, cilen, *next;
-    u_short s;
-    u_int32_t l;
-    ipxcp_options no;		/* options we've seen Naks for */
-    ipxcp_options try;		/* options to request next time */
-
-    BZERO(&no, sizeof(no));
-    try = *go;
-
-    while (len > CILEN_VOID) {
-	GETCHAR (citype, p);
-	GETCHAR (cilen,	 p);
-	len -= cilen;
-	if (len < 0)
-	    goto bad;
-	next = &p [cilen - CILEN_VOID];
-
-	switch (citype) {
-	case IPX_NETWORK_NUMBER:
-	    if (!go->neg_nn || no.neg_nn || (cilen != CILEN_NETN))
-		goto bad;
-	    no.neg_nn = 1;
-
-	    GETLONG(l, p);
-	    if (l && ao->accept_network)
-		try.our_network = l;
-	    break;
-
-	case IPX_NODE_NUMBER:
-	    if (!go->neg_node || no.neg_node || (cilen != CILEN_NODEN))
-		goto bad;
-	    no.neg_node = 1;
-
-	    if (!zero_node (p) && ao->accept_local &&
-		! compare_node (p, ho->his_node))
-		copy_node (p, try.our_node);
-	    break;
-
-	    /* This has never been sent. Ignore the NAK frame */
-	case IPX_COMPRESSION_PROTOCOL:
-	    goto bad;
-
-	case IPX_ROUTER_PROTOCOL:
-	    if (!go->neg_router || (cilen < CILEN_PROTOCOL))
-		goto bad;
-
-	    GETSHORT (s, p);
-	    if (s > 15)         /* This is just bad, but ignore for now. */
-	        break;
-
-	    s = BIT(s);
-	    if (no.router & s)  /* duplicate NAKs are always bad */
-		goto bad;
-
-	    if (no.router == 0) /* Reset on first NAK only */
-		try.router = 0;
-
-	    no.router      |= s;
-	    try.router     |= s;
-	    try.neg_router  = 1;
-	    break;
-
-	    /* These, according to the RFC, must never be NAKed. */
-	case IPX_ROUTER_NAME:
-	case IPX_COMPLETE:
-	    goto bad;
-
-	    /* These are for options which we have not seen. */
-	default:
-	    break;
-	}
-	p = next;
-    }
-
-    /*
-     * Do not permit the peer to force a router protocol which we do not
-     * support. However, default to the condition that will accept "NONE".
-     */
-    try.router &= (ao->router | BIT(IPX_NONE));
-    if (try.router == 0 && ao->router != 0)
-	try.router = BIT(IPX_NONE);
-
-    if (try.router != 0)
-        try.neg_router = 1;
-    
-    /*
-     * OK, the Nak is good.  Now we can update state.
-     * If there are any options left, we ignore them.
-     */
-    if (f->state != OPENED)
-	*go = try;
-
-    return 1;
-
-bad:
-    IPXCPDEBUG(("ipxcp_nakci: received bad Nak!"));
-    return 0;
-}
-
-/*
- * ipxcp_rejci - Reject some of our CIs.
- */
-static int
-ipxcp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    u_short cilen, citype, cishort;
-    u_char cichar;
-    u_int32_t cilong;
-    ipxcp_options try;		/* options to request next time */
-
-#define REJCINETWORK(opt, neg, val) \
-    if (neg && p[0] == opt) { \
-	if ((len -= CILEN_NETN) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_NETN || \
-	    citype != opt) \
-	    break; \
-	GETLONG(cilong, p); \
-	if (cilong != val) \
-	    break; \
-	neg = 0; \
-    }
-
-#define REJCICHARS(opt, neg, val, cnt) \
-    if (neg && p[0] == opt) { \
-	int indx, count = cnt; \
-	len -= (count + 2); \
-	if (len < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != (count + 2) || \
-	    citype != opt) \
-	    break; \
-	for (indx = 0; indx < count; ++indx) {\
-	    GETCHAR(cichar, p); \
-	    if (cichar != ((u_char *) &val)[indx]) \
-	       break; \
-	}\
-	if (indx != count) \
-	    break; \
-	neg = 0; \
-    }
-
-#define REJCINODE(opt,neg,val) REJCICHARS(opt,neg,val,sizeof(val))
-#define REJCINAME(opt,neg,val) REJCICHARS(opt,neg,val,strlen(val))
-
-#define REJCIVOID(opt, neg) \
-    if (neg && p[0] == opt) { \
-	if ((len -= CILEN_VOID) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_VOID || citype != opt) \
-	    break; \
-	neg = 0; \
-    }
-
-/* a reject for RIP/SAP is invalid since we don't send it and you can't
-   reject something which is not sent. (You can NAK, but you can't REJ.) */
-#define REJCIPROTO(opt, neg, val, bit) \
-    if (neg && p[0] == opt) { \
-	if ((len -= CILEN_PROTOCOL) < 0) \
-	    break; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_PROTOCOL) \
-	    break; \
-	GETSHORT(cishort, p); \
-	if (cishort != to_external (val) || cishort == RIP_SAP) \
-	    break; \
-	neg = 0; \
-    }
-/*
- * Any Rejected CIs must be in exactly the same order that we sent.
- * Check packet length and CI length at each step.
- * If we find any deviations, then this packet is bad.
- */
-    try = *go;
-
-    do {
-	REJCINETWORK (IPX_NETWORK_NUMBER,  try.neg_nn,	   try.our_network);
-	REJCINODE    (IPX_NODE_NUMBER,	   try.neg_node,   try.our_node);
-	REJCINAME    (IPX_ROUTER_NAME,	   try.neg_name,   try.name);
-	REJCIPROTO   (IPX_ROUTER_PROTOCOL, try.neg_router, try.router, 0);
-/*
- * This is the end of the record.
- */
-	if (len == 0) {
-	    if (f->state != OPENED)
-		*go = try;
-	    return (1);
-	}
-    } while (0);
-/*
- * The frame is invalid at this point.
- */
-    IPXCPDEBUG(("ipxcp_rejci: received bad Reject!"));
-    return 0;
-}
-
-/*
- * ipxcp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately.  If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-ipxcp_reqci(f, inp, len, reject_if_disagree)
-    fsm *f;
-    u_char *inp;		/* Requested CIs */
-    int *len;			/* Length of requested CIs */
-    int reject_if_disagree;
-{
-    u_char *cip, *next;		/* Pointer to current and next CIs */
-    u_short cilen, citype;	/* Parsed len, type */
-    u_short cishort;		/* Parsed short value */
-    u_int32_t cinetwork;	/* Parsed address values */
-    int rc = CONFACK;		/* Final packet return code */
-    int orc;			/* Individual option return code */
-    u_char *p;			/* Pointer to next char to parse */
-    u_char *ucp = inp;		/* Pointer to current output char */
-    int l = *len;		/* Length left */
-
-    /*
-     * Reset all his options.
-     */
-    BZERO(ho, sizeof(*ho));
-    
-    /*
-     * Process all his options.
-     */
-    next = inp;
-    while (l) {
-	orc = CONFACK;			/* Assume success */
-	cip = p = next;			/* Remember begining of CI */
-	if (l < 2 ||			/* Not enough data for CI header or */
-	    p[1] < 2 ||			/*  CI length too small or */
-	    p[1] > l) {			/*  CI length too big? */
-	    IPXCPDEBUG(("ipxcp_reqci: bad CI length!"));
-	    orc = CONFREJ;		/* Reject bad CI */
-	    cilen = l;			/* Reject till end of packet */
-	    l = 0;			/* Don't loop again */
-	    goto endswitch;
-	}
-	GETCHAR(citype, p);		/* Parse CI type */
-	GETCHAR(cilen, p);		/* Parse CI length */
-	l -= cilen;			/* Adjust remaining length */
-	next += cilen;			/* Step to next CI */
-
-	switch (citype) {		/* Check CI type */
-/*
- * The network number must match. Choose the larger of the two.
- */
-	case IPX_NETWORK_NUMBER:
-	    /* if we wont negotiate the network number or the length is wrong
-	       then reject the option */
-	    if ( !ao->neg_nn || cilen != CILEN_NETN ) {
-		orc = CONFREJ;
-		break;		
-	    }
-	    GETLONG(cinetwork, p);
-
-	    /* If the network numbers match then acknowledge them. */
-	    if (cinetwork != 0) {
-		ho->his_network = cinetwork;
-		ho->neg_nn	= 1;
-		if (wo->our_network == cinetwork)
-		    break;
-/*
- * If the network number is not given or we don't accept their change or
- * the network number is too small then NAK it.
- */
-		if (! ao->accept_network || cinetwork < wo->our_network) {
-		    DECPTR (sizeof (u_int32_t), p);
-		    PUTLONG (wo->our_network, p);
-		    orc = CONFNAK;
-		}
-		break;
-	    }
-/*
- * The peer sent '0' for the network. Give it ours if we have one.
- */
-	    if (go->our_network != 0) {
-		DECPTR (sizeof (u_int32_t), p);
-		PUTLONG (wo->our_network, p);
-		orc = CONFNAK;
-/*
- * We don't have one. Reject the value.
- */
-	    } else
-		orc = CONFREJ;
-
-	    break;
-/*
- * The node number is required
- */
-	case IPX_NODE_NUMBER:
-	    /* if we wont negotiate the node number or the length is wrong
-	       then reject the option */
-	    if ( cilen != CILEN_NODEN ) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    copy_node (p, ho->his_node);
-	    ho->neg_node = 1;
-/*
- * If the remote does not have a number and we do then NAK it with the value
- * which we have for it. (We never have a default value of zero.)
- */
-	    if (zero_node (ho->his_node)) {
-		orc = CONFNAK;
-		copy_node (wo->his_node, p);
-		INCPTR (sizeof (wo->his_node), p);
-		break;
-	    }
-/*
- * If you have given me the expected network node number then I'll accept
- * it now.
- */
-	    if (compare_node (wo->his_node, ho->his_node)) {
-		orc = CONFACK;
-		ho->neg_node = 1;
-		INCPTR (sizeof (wo->his_node), p);
-		break;
-	    }
-/*
- * If his node number is the same as ours then ask him to try the next
- * value.
- */
-	    if (compare_node (ho->his_node, go->our_node)) {
-		inc_node (ho->his_node);
-		orc = CONFNAK;
-		copy_node (ho->his_node, p);
-		INCPTR (sizeof (wo->his_node), p);
-		break;
-	    }
-/*
- * If we don't accept a new value then NAK it.
- */
-	    if (! ao->accept_remote) {
-		copy_node (wo->his_node, p);
-		INCPTR (sizeof (wo->his_node), p);
-		orc = CONFNAK;
-		break;
-	    }
-	    orc = CONFACK;
-	    ho->neg_node = 1;
-	    INCPTR (sizeof (wo->his_node), p);
-	    break;
-/*
- * Compression is not desired at this time. It is always rejected.
- */
-	case IPX_COMPRESSION_PROTOCOL:
-	    orc = CONFREJ;
-	    break;
-/*
- * The routing protocol is a bitmask of various types. Any combination
- * of the values RIP_SAP and NLSP are permissible. 'IPX_NONE' for no
- * routing protocol must be specified only once.
- */
-	case IPX_ROUTER_PROTOCOL:
-	    if ( !ao->neg_router || cilen < CILEN_PROTOCOL ) {
-		orc = CONFREJ;
-		break;		
-	    }
-
-	    GETSHORT (cishort, p);
-
-	    if (wo->neg_router == 0) {
-	        wo->neg_router = 1;
-		wo->router     = BIT(IPX_NONE);
-	    }
-
-	    if ((cishort == IPX_NONE && ho->router != 0) ||
-		(ho->router & BIT(IPX_NONE))) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    cishort = BIT(cishort);
-	    if (ho->router & cishort) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    ho->router	  |= cishort;
-	    ho->neg_router = 1;
-
-	    /* Finally do not allow a router protocol which we do not
-	       support. */
-
-	    if ((cishort & (ao->router | BIT(IPX_NONE))) == 0) {
-	        int protocol;
-
-		if (cishort == BIT(NLSP) &&
-		    (ao->router & BIT(RIP_SAP)) &&
-		    !wo->tried_rip) {
-		    protocol      = RIP_SAP;
-		    wo->tried_rip = 1;
-		} else
-		    protocol = IPX_NONE;
-
-		DECPTR (sizeof (u_int16_t), p);
-		PUTSHORT (protocol, p);
-		orc = CONFNAK;
-	    }
-	    break;
-/*
- * The router name is advisorary. Just accept it if it is not too large.
- */
-	case IPX_ROUTER_NAME:
-	    if (cilen >= CILEN_NAME) {
-		int name_size = cilen - CILEN_NAME;
-		if (name_size > sizeof (ho->name))
-		    name_size = sizeof (ho->name) - 1;
-		memset (ho->name, 0, sizeof (ho->name));
-		memcpy (ho->name, p, name_size);
-		ho->name [name_size] = '\0';
-		ho->neg_name = 1;
-		orc = CONFACK;
-		break;
-	    }
-	    orc = CONFREJ;
-	    break;
-/*
- * This is advisorary.
- */
-	case IPX_COMPLETE:
-	    if (cilen != CILEN_COMPLETE)
-		orc = CONFREJ;
-	    else {
-		ho->neg_complete = 1;
-		orc = CONFACK;
-	    }
-	    break;
-/*
- * All other entries are not known at this time.
- */
-	default:
-	    orc = CONFREJ;
-	    break;
-	}
-endswitch:
-	if (orc == CONFACK &&		/* Good CI */
-	    rc != CONFACK)		/*  but prior CI wasnt? */
-	    continue;			/* Don't send this one */
-
-	if (orc == CONFNAK) {		/* Nak this CI? */
-	    if (reject_if_disagree)	/* Getting fed up with sending NAKs? */
-		orc = CONFREJ;		/* Get tough if so */
-	    if (rc == CONFREJ)		/* Rejecting prior CI? */
-		continue;		/* Don't send this one */
-	    if (rc == CONFACK) {	/* Ack'd all prior CIs? */
-		rc  = CONFNAK;		/* Not anymore... */
-		ucp = inp;		/* Backup */
-	    }
-	}
-
-	if (orc == CONFREJ &&		/* Reject this CI */
-	    rc != CONFREJ) {		/*  but no prior ones? */
-	    rc = CONFREJ;
-	    ucp = inp;			/* Backup */
-	}
-
-	/* Need to move CI? */
-	if (ucp != cip)
-	    BCOPY(cip, ucp, cilen);	/* Move it */
-
-	/* Update output pointer */
-	INCPTR(cilen, ucp);
-    }
-
-    /*
-     * If we aren't rejecting this packet, and we want to negotiate
-     * their address, and they didn't send their address, then we
-     * send a NAK with a IPX_NODE_NUMBER option appended. We assume the
-     * input buffer is long enough that we can append the extra
-     * option safely.
-     */
-
-    if (rc != CONFREJ && !ho->neg_node &&
-	wo->req_nn && !reject_if_disagree) {
-	if (rc == CONFACK) {
-	    rc = CONFNAK;
-	    wo->req_nn = 0;		/* don't ask again */
-	    ucp = inp;			/* reset pointer */
-	}
-
-	if (zero_node (wo->his_node))
-	    inc_node (wo->his_node);
-
-	PUTCHAR (IPX_NODE_NUMBER, ucp);
-	PUTCHAR (CILEN_NODEN, ucp);
-	copy_node (wo->his_node, ucp);
-	INCPTR (sizeof (wo->his_node), ucp);
-    }
-
-    *len = ucp - inp;			/* Compute output length */
-    IPXCPDEBUG(("ipxcp: returning Configure-%s", CODENAME(rc)));
-    return (rc);			/* Return final code */
-}
-
-/*
- * ipxcp_up - IPXCP has come UP.
- *
- * Configure the IP network interface appropriately and bring it up.
- */
-
-static void
-ipxcp_up(f)
-    fsm *f;
-{
-    int unit = f->unit;
-
-    IPXCPDEBUG(("ipxcp: up"));
-
-    /* The default router protocol is RIP/SAP. */
-    if (ho->router == 0)
-        ho->router = BIT(RIP_SAP);
-
-    if (go->router == 0)
-        go->router = BIT(RIP_SAP);
-
-    /* Fetch the network number */
-    if (!ho->neg_nn)
-	ho->his_network = wo->his_network;
-
-    if (!ho->neg_node)
-	copy_node (wo->his_node, ho->his_node);
-
-    if (!wo->neg_node && !go->neg_node)
-	copy_node (wo->our_node, go->our_node);
-
-    if (zero_node (go->our_node)) {
-        static char errmsg[] = "Could not determine local IPX node address";
-	if (debug)
-	    error(errmsg);
-	ipxcp_close(f->unit, errmsg);
-	return;
-    }
-
-    go->network = go->our_network;
-    if (ho->his_network != 0 && ho->his_network > go->network)
-	go->network = ho->his_network;
-
-    if (go->network == 0) {
-        static char errmsg[] = "Can not determine network number";
-	if (debug)
-	    error(errmsg);
-	ipxcp_close (unit, errmsg);
-	return;
-    }
-
-    /* bring the interface up */
-    if (!sifup(unit)) {
-	if (debug)
-	    warn("sifup failed (IPX)");
-	ipxcp_close(unit, "Interface configuration failed");
-	return;
-    }
-    ipxcp_is_up = 1;
-
-    /* set the network number for IPX */
-    if (!sipxfaddr(unit, go->network, go->our_node)) {
-	if (debug)
-	    warn("sipxfaddr failed");
-	ipxcp_close(unit, "Interface configuration failed");
-	return;
-    }
-
-    np_up(f->unit, PPP_IPX);
-
-    /*
-     * Execute the ipx-up script, like this:
-     *	/etc/ppp/ipx-up interface tty speed local-IPX remote-IPX
-     */
-
-    ipxcp_script (f, _PATH_IPXUP);
-}
-
-/*
- * ipxcp_down - IPXCP has gone DOWN.
- *
- * Take the IP network interface down, clear its addresses
- * and delete routes through it.
- */
-
-static void
-ipxcp_down(f)
-    fsm *f;
-{
-    IPXCPDEBUG(("ipxcp: down"));
-
-    if (!ipxcp_is_up)
-	return;
-    ipxcp_is_up = 0;
-    np_down(f->unit, PPP_IPX);
-    cipxfaddr(f->unit);
-    sifnpmode(f->unit, PPP_IPX, NPMODE_DROP);
-    sifdown(f->unit);
-    ipxcp_script (f, _PATH_IPXDOWN);
-}
-
-
-/*
- * ipxcp_finished - possibly shut down the lower layers.
- */
-static void
-ipxcp_finished(f)
-    fsm *f;
-{
-    np_finished(f->unit, PPP_IPX);
-}
-
-
-/*
- * ipxcp_script - Execute a script with arguments
- * interface-name tty-name speed local-IPX remote-IPX networks.
- */
-static void
-ipxcp_script(f, script)
-    fsm *f;
-    char *script;
-{
-    char strspeed[32],	 strlocal[32],	   strremote[32];
-    char strnetwork[32], strpid[32];
-    char *argv[14],	 strproto_lcl[32], strproto_rmt[32];
-
-    slprintf(strpid, sizeof(strpid), "%d", getpid());
-    slprintf(strspeed, sizeof(strspeed),"%d", baud_rate);
-
-    strproto_lcl[0] = '\0';
-    if (go->neg_router && ((go->router & BIT(IPX_NONE)) == 0)) {
-	if (go->router & BIT(RIP_SAP))
-	    strlcpy (strproto_lcl, "RIP ", sizeof(strproto_lcl));
-	if (go->router & BIT(NLSP))
-	    strlcat (strproto_lcl, "NLSP ", sizeof(strproto_lcl));
-    }
-
-    if (strproto_lcl[0] == '\0')
-	strlcpy (strproto_lcl, "NONE ", sizeof(strproto_lcl));
-
-    strproto_lcl[strlen (strproto_lcl)-1] = '\0';
-
-    strproto_rmt[0] = '\0';
-    if (ho->neg_router && ((ho->router & BIT(IPX_NONE)) == 0)) {
-	if (ho->router & BIT(RIP_SAP))
-	    strlcpy (strproto_rmt, "RIP ", sizeof(strproto_rmt));
-	if (ho->router & BIT(NLSP))
-	    strlcat (strproto_rmt, "NLSP ", sizeof(strproto_rmt));
-    }
-
-    if (strproto_rmt[0] == '\0')
-	strlcpy (strproto_rmt, "NONE ", sizeof(strproto_rmt));
-
-    strproto_rmt[strlen (strproto_rmt)-1] = '\0';
-
-    strlcpy (strnetwork, ipx_ntoa (go->network), sizeof(strnetwork));
-
-    slprintf (strlocal, sizeof(strlocal), "%0.6B", go->our_node);
-
-    slprintf (strremote, sizeof(strremote), "%0.6B", ho->his_node);
-
-    argv[0]  = script;
-    argv[1]  = ifname;
-    argv[2]  = devnam;
-    argv[3]  = strspeed;
-    argv[4]  = strnetwork;
-    argv[5]  = strlocal;
-    argv[6]  = strremote;
-    argv[7]  = strproto_lcl;
-    argv[8]  = strproto_rmt;
-    argv[9]  = go->name;
-    argv[10] = ho->name;
-    argv[11] = ipparam;
-    argv[12] = strpid;
-    argv[13] = NULL;
-    run_program(script, argv, 0, NULL, NULL);
-}
-
-/*
- * ipxcp_printpkt - print the contents of an IPXCP packet.
- */
-static char *ipxcp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej"
-};
-
-static int
-ipxcp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len, olen;
-    u_char *pstart, *optend;
-    u_short cishort;
-    u_int32_t cilong;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(ipxcp_codenames) / sizeof(char *))
-	printer(arg, " %s", ipxcp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print option list */
-	while (len >= 2) {
-	    GETCHAR(code, p);
-	    GETCHAR(olen, p);
-	    p -= 2;
-	    if (olen < CILEN_VOID || olen > len) {
-		break;
-	    }
-	    printer(arg, " <");
-	    len -= olen;
-	    optend = p + olen;
-	    switch (code) {
-	    case IPX_NETWORK_NUMBER:
-		if (olen == CILEN_NETN) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer (arg, "network %s", ipx_ntoa (cilong));
-		}
-		break;
-	    case IPX_NODE_NUMBER:
-		if (olen == CILEN_NODEN) {
-		    p += 2;
-		    printer (arg, "node ");
-		    while (p < optend) {
-			GETCHAR(code, p);
-			printer(arg, "%.2x", (int) (unsigned int) (unsigned char) code);
-		    }
-		}
-		break;
-	    case IPX_COMPRESSION_PROTOCOL:
-		if (olen == CILEN_COMPRESS) {
-		    p += 2;
-		    GETSHORT (cishort, p);
-		    printer (arg, "compression %d", (int) cishort);
-		}
-		break;
-	    case IPX_ROUTER_PROTOCOL:
-		if (olen == CILEN_PROTOCOL) {
-		    p += 2;
-		    GETSHORT (cishort, p);
-		    printer (arg, "router proto %d", (int) cishort);
-		}
-		break;
-	    case IPX_ROUTER_NAME:
-		if (olen >= CILEN_NAME) {
-		    p += 2;
-		    printer (arg, "router name \"");
-		    while (p < optend) {
-			GETCHAR(code, p);
-			if (code >= 0x20 && code <= 0x7E)
-			    printer (arg, "%c", (int) (unsigned int) (unsigned char) code);
-			else
-			    printer (arg, " \\%.2x", (int) (unsigned int) (unsigned char) code);
-		    }
-		    printer (arg, "\"");
-		}
-		break;
-	    case IPX_COMPLETE:
-		if (olen == CILEN_COMPLETE) {
-		    p += 2;
-		    printer (arg, "complete");
-		}
-		break;
-	    default:
-		break;
-	    }
-
-	    while (p < optend) {
-		GETCHAR(code, p);
-		printer(arg, " %.2x", (int) (unsigned int) (unsigned char) code);
-	    }
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    printer(arg, " ");
-	    print_string(p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", (int) (unsigned int) (unsigned char) code);
-    }
-
-    return p - pstart;
-}
-#endif /* ifdef IPX_CHANGE */
diff --git a/mdk-stage1/ppp/pppd/ipxcp.h b/mdk-stage1/ppp/pppd/ipxcp.h
deleted file mode 100644
index 47f680d70..000000000
--- a/mdk-stage1/ppp/pppd/ipxcp.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * ipxcp.h - IPX Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define IPX_NETWORK_NUMBER        1   /* IPX Network Number */
-#define IPX_NODE_NUMBER           2
-#define IPX_COMPRESSION_PROTOCOL  3
-#define IPX_ROUTER_PROTOCOL       4
-#define IPX_ROUTER_NAME           5
-#define IPX_COMPLETE              6
-
-/* Values for the router protocol */
-#define IPX_NONE		  0
-#define RIP_SAP			  2
-#define NLSP			  4
-
-typedef struct ipxcp_options {
-    bool neg_node;		/* Negotiate IPX node number? */
-    bool req_node;		/* Ask peer to send IPX node number? */
-
-    bool neg_nn;		/* Negotiate IPX network number? */
-    bool req_nn;		/* Ask peer to send IPX network number */
-
-    bool neg_name;		/* Negotiate IPX router name */
-    bool neg_complete;		/* Negotiate completion */
-    bool neg_router;		/* Negotiate IPX router number */
-
-    bool accept_local;		/* accept peer's value for ournode */
-    bool accept_remote;		/* accept peer's value for hisnode */
-    bool accept_network;	/* accept network number */
-
-    bool tried_nlsp;		/* I have suggested NLSP already */
-    bool tried_rip;		/* I have suggested RIP/SAP already */
-
-    u_int32_t his_network;	/* base network number */
-    u_int32_t our_network;	/* our value for network number */
-    u_int32_t network;		/* the final network number */
-
-    u_char his_node[6];		/* peer's node number */
-    u_char our_node[6];		/* our node number */
-    u_char name [48];		/* name of the router */
-    int    router;		/* routing protocol */
-} ipxcp_options;
-
-extern fsm ipxcp_fsm[];
-extern ipxcp_options ipxcp_wantoptions[];
-extern ipxcp_options ipxcp_gotoptions[];
-extern ipxcp_options ipxcp_allowoptions[];
-extern ipxcp_options ipxcp_hisoptions[];
-
-extern struct protent ipxcp_protent;
diff --git a/mdk-stage1/ppp/pppd/lcp.c b/mdk-stage1/ppp/pppd/lcp.c
deleted file mode 100644
index 41c58cad5..000000000
--- a/mdk-stage1/ppp/pppd/lcp.c
+++ /dev/null
@@ -1,2224 +0,0 @@
-/*
- * lcp.c - PPP Link Control Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "chap.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-/*
- * When the link comes up we want to be able to wait for a short while,
- * or until seeing some input from the peer, before starting to send
- * configure-requests.  We do this by delaying the fsm_lowerup call.
- */
-/* steal a bit in fsm flags word */
-#define DELAYED_UP	0x100
-
-static void lcp_delayed_up __P((void *));
-
-/*
- * LCP-related command-line options.
- */
-int	lcp_echo_interval = 0; 	/* Interval between LCP echo-requests */
-int	lcp_echo_fails = 0;	/* Tolerance to unanswered echo-requests */
-bool	lax_recv = 0;		/* accept control chars in asyncmap */
-bool	noendpoint = 0;		/* don't send/accept endpoint discriminator */
-
-static int noopt __P((char **));
-
-#ifdef HAVE_MULTILINK
-static int setendpoint __P((char **));
-static void printendpoint __P((option_t *, void (*)(void *, char *, ...),
-			       void *));
-#endif /* HAVE_MULTILINK */
-
-static option_t lcp_option_list[] = {
-    /* LCP options */
-    { "-all", o_special_noarg, (void *)noopt,
-      "Don't request/allow any LCP options" },
-
-    { "noaccomp", o_bool, &lcp_wantoptions[0].neg_accompression,
-      "Disable address/control compression",
-      OPT_A2CLR, &lcp_allowoptions[0].neg_accompression },
-    { "-ac", o_bool, &lcp_wantoptions[0].neg_accompression,
-      "Disable address/control compression",
-      OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_accompression },
-
-    { "asyncmap", o_uint32, &lcp_wantoptions[0].asyncmap,
-      "Set asyncmap (for received packets)",
-      OPT_OR, &lcp_wantoptions[0].neg_asyncmap },
-    { "-as", o_uint32, &lcp_wantoptions[0].asyncmap,
-      "Set asyncmap (for received packets)",
-      OPT_ALIAS | OPT_OR, &lcp_wantoptions[0].neg_asyncmap },
-    { "default-asyncmap", o_uint32, &lcp_wantoptions[0].asyncmap,
-      "Disable asyncmap negotiation",
-      OPT_OR | OPT_NOARG | OPT_VAL(~0U) | OPT_A2CLR,
-      &lcp_allowoptions[0].neg_asyncmap },
-    { "-am", o_uint32, &lcp_wantoptions[0].asyncmap,
-      "Disable asyncmap negotiation",
-      OPT_ALIAS | OPT_OR | OPT_NOARG | OPT_VAL(~0U) | OPT_A2CLR,
-      &lcp_allowoptions[0].neg_asyncmap },
-
-    { "nomagic", o_bool, &lcp_wantoptions[0].neg_magicnumber,
-      "Disable magic number negotiation (looped-back line detection)",
-      OPT_A2CLR, &lcp_allowoptions[0].neg_magicnumber },
-    { "-mn", o_bool, &lcp_wantoptions[0].neg_magicnumber,
-      "Disable magic number negotiation (looped-back line detection)",
-      OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_magicnumber },
-
-    { "mru", o_int, &lcp_wantoptions[0].mru,
-      "Set MRU (maximum received packet size) for negotiation",
-      OPT_PRIO, &lcp_wantoptions[0].neg_mru },
-    { "default-mru", o_bool, &lcp_wantoptions[0].neg_mru,
-      "Disable MRU negotiation (use default 1500)",
-      OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_mru },
-    { "-mru", o_bool, &lcp_wantoptions[0].neg_mru,
-      "Disable MRU negotiation (use default 1500)",
-      OPT_ALIAS | OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_mru },
-
-    { "mtu", o_int, &lcp_allowoptions[0].mru,
-      "Set our MTU", OPT_LIMITS, NULL, MAXMRU, MINMRU },
-
-    { "nopcomp", o_bool, &lcp_wantoptions[0].neg_pcompression,
-      "Disable protocol field compression",
-      OPT_A2CLR, &lcp_allowoptions[0].neg_pcompression },
-    { "-pc", o_bool, &lcp_wantoptions[0].neg_pcompression,
-      "Disable protocol field compression",
-      OPT_ALIAS | OPT_A2CLR, &lcp_allowoptions[0].neg_pcompression },
-
-    { "passive", o_bool, &lcp_wantoptions[0].passive,
-      "Set passive mode", 1 },
-    { "-p", o_bool, &lcp_wantoptions[0].passive,
-      "Set passive mode", OPT_ALIAS | 1 },
-
-    { "silent", o_bool, &lcp_wantoptions[0].silent,
-      "Set silent mode", 1 },
-
-    { "lcp-echo-failure", o_int, &lcp_echo_fails,
-      "Set number of consecutive echo failures to indicate link failure",
-      OPT_PRIO },
-    { "lcp-echo-interval", o_int, &lcp_echo_interval,
-      "Set time in seconds between LCP echo requests", OPT_PRIO },
-    { "lcp-restart", o_int, &lcp_fsm[0].timeouttime,
-      "Set time in seconds between LCP retransmissions", OPT_PRIO },
-    { "lcp-max-terminate", o_int, &lcp_fsm[0].maxtermtransmits,
-      "Set maximum number of LCP terminate-request transmissions", OPT_PRIO },
-    { "lcp-max-configure", o_int, &lcp_fsm[0].maxconfreqtransmits,
-      "Set maximum number of LCP configure-request transmissions", OPT_PRIO },
-    { "lcp-max-failure", o_int, &lcp_fsm[0].maxnakloops,
-      "Set limit on number of LCP configure-naks", OPT_PRIO },
-
-    { "receive-all", o_bool, &lax_recv,
-      "Accept all received control characters", 1 },
-
-#ifdef HAVE_MULTILINK
-    { "mrru", o_int, &lcp_wantoptions[0].mrru,
-      "Maximum received packet size for multilink bundle",
-      OPT_PRIO, &lcp_wantoptions[0].neg_mrru },
-
-    { "mpshortseq", o_bool, &lcp_wantoptions[0].neg_ssnhf,
-      "Use short sequence numbers in multilink headers",
-      OPT_PRIO | 1, &lcp_allowoptions[0].neg_ssnhf },
-    { "nompshortseq", o_bool, &lcp_wantoptions[0].neg_ssnhf,
-      "Don't use short sequence numbers in multilink headers",
-      OPT_PRIOSUB | OPT_A2CLR, &lcp_allowoptions[0].neg_ssnhf },
-
-    { "endpoint", o_special, (void *) setendpoint,
-      "Endpoint discriminator for multilink",
-      OPT_PRIO | OPT_A2PRINTER, (void *) printendpoint },
-#endif /* HAVE_MULTILINK */
-
-    { "noendpoint", o_bool, &noendpoint,
-      "Don't send or accept multilink endpoint discriminator", 1 },
-
-    {NULL}
-};
-
-/* global vars */
-fsm lcp_fsm[NUM_PPP];			/* LCP fsm structure (global)*/
-lcp_options lcp_wantoptions[NUM_PPP];	/* Options that we want to request */
-lcp_options lcp_gotoptions[NUM_PPP];	/* Options that peer ack'd */
-lcp_options lcp_allowoptions[NUM_PPP];	/* Options we allow peer to request */
-lcp_options lcp_hisoptions[NUM_PPP];	/* Options that we ack'd */
-
-static int lcp_echos_pending = 0;	/* Number of outstanding echo msgs */
-static int lcp_echo_number   = 0;	/* ID number of next echo frame */
-static int lcp_echo_timer_running = 0;  /* set if a timer is running */
-
-static u_char nak_buffer[PPP_MRU];	/* where we construct a nak packet */
-
-/*
- * Callbacks for fsm code.  (CI = Configuration Information)
- */
-static void lcp_resetci __P((fsm *));	/* Reset our CI */
-static int  lcp_cilen __P((fsm *));		/* Return length of our CI */
-static void lcp_addci __P((fsm *, u_char *, int *)); /* Add our CI to pkt */
-static int  lcp_ackci __P((fsm *, u_char *, int)); /* Peer ack'd our CI */
-static int  lcp_nakci __P((fsm *, u_char *, int)); /* Peer nak'd our CI */
-static int  lcp_rejci __P((fsm *, u_char *, int)); /* Peer rej'd our CI */
-static int  lcp_reqci __P((fsm *, u_char *, int *, int)); /* Rcv peer CI */
-static void lcp_up __P((fsm *));		/* We're UP */
-static void lcp_down __P((fsm *));		/* We're DOWN */
-static void lcp_starting __P((fsm *));	/* We need lower layer up */
-static void lcp_finished __P((fsm *));	/* We need lower layer down */
-static int  lcp_extcode __P((fsm *, int, int, u_char *, int));
-static void lcp_rprotrej __P((fsm *, u_char *, int));
-
-/*
- * routines to send LCP echos to peer
- */
-
-static void lcp_echo_lowerup __P((int));
-static void lcp_echo_lowerdown __P((int));
-static void LcpEchoTimeout __P((void *));
-static void lcp_received_echo_reply __P((fsm *, int, u_char *, int));
-static void LcpSendEchoRequest __P((fsm *));
-static void LcpLinkFailure __P((fsm *));
-static void LcpEchoCheck __P((fsm *));
-
-static fsm_callbacks lcp_callbacks = {	/* LCP callback routines */
-    lcp_resetci,		/* Reset our Configuration Information */
-    lcp_cilen,			/* Length of our Configuration Information */
-    lcp_addci,			/* Add our Configuration Information */
-    lcp_ackci,			/* ACK our Configuration Information */
-    lcp_nakci,			/* NAK our Configuration Information */
-    lcp_rejci,			/* Reject our Configuration Information */
-    lcp_reqci,			/* Request peer's Configuration Information */
-    lcp_up,			/* Called when fsm reaches OPENED state */
-    lcp_down,			/* Called when fsm leaves OPENED state */
-    lcp_starting,		/* Called when we want the lower layer up */
-    lcp_finished,		/* Called when we want the lower layer down */
-    NULL,			/* Called when Protocol-Reject received */
-    NULL,			/* Retransmission is necessary */
-    lcp_extcode,		/* Called to handle LCP-specific codes */
-    "LCP"			/* String name of protocol */
-};
-
-/*
- * Protocol entry points.
- * Some of these are called directly.
- */
-
-static void lcp_init __P((int));
-static void lcp_input __P((int, u_char *, int));
-static void lcp_protrej __P((int));
-static int  lcp_printpkt __P((u_char *, int,
-			      void (*) __P((void *, char *, ...)), void *));
-
-struct protent lcp_protent = {
-    PPP_LCP,
-    lcp_init,
-    lcp_input,
-    lcp_protrej,
-    lcp_lowerup,
-    lcp_lowerdown,
-    lcp_open,
-    lcp_close,
-    lcp_printpkt,
-    NULL,
-    1,
-    "LCP",
-    NULL,
-    lcp_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-int lcp_loopbackfail = DEFLOOPBACKFAIL;
-
-/*
- * Length of each type of configuration option (in octets)
- */
-#define CILEN_VOID	2
-#define CILEN_CHAR	3
-#define CILEN_SHORT	4	/* CILEN_VOID + 2 */
-#define CILEN_CHAP	5	/* CILEN_VOID + 2 + 1 */
-#define CILEN_LONG	6	/* CILEN_VOID + 4 */
-#define CILEN_LQR	8	/* CILEN_VOID + 2 + 4 */
-#define CILEN_CBCP	3
-
-#define CODENAME(x)	((x) == CONFACK ? "ACK" : \
-			 (x) == CONFNAK ? "NAK" : "REJ")
-
-/*
- * noopt - Disable all options (why?).
- */
-static int
-noopt(argv)
-    char **argv;
-{
-    BZERO((char *) &lcp_wantoptions[0], sizeof (struct lcp_options));
-    BZERO((char *) &lcp_allowoptions[0], sizeof (struct lcp_options));
-
-    return (1);
-}
-
-#ifdef HAVE_MULTILINK
-static int
-setendpoint(argv)
-    char **argv;
-{
-    if (str_to_epdisc(&lcp_wantoptions[0].endpoint, *argv)) {
-	lcp_wantoptions[0].neg_endpoint = 1;
-	return 1;
-    }
-    option_error("Can't parse '%s' as an endpoint discriminator", *argv);
-    return 0;
-}
-
-static void
-printendpoint(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	printer(arg, "%s", epdisc_to_str(&lcp_wantoptions[0].endpoint));
-}
-#endif /* HAVE_MULTILINK */
-
-/*
- * lcp_init - Initialize LCP.
- */
-static void
-lcp_init(unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-    lcp_options *wo = &lcp_wantoptions[unit];
-    lcp_options *ao = &lcp_allowoptions[unit];
-
-    f->unit = unit;
-    f->protocol = PPP_LCP;
-    f->callbacks = &lcp_callbacks;
-
-    fsm_init(f);
-
-    BZERO(wo, sizeof(*wo));
-    wo->neg_mru = 1;
-    wo->mru = DEFMRU;
-    wo->neg_asyncmap = 1;
-    wo->chap_mdtype = CHAP_DIGEST_MD5;
-    wo->neg_magicnumber = 1;
-    wo->neg_pcompression = 1;
-    wo->neg_accompression = 1;
-
-    BZERO(ao, sizeof(*ao));
-    ao->neg_mru = 1;
-    ao->mru = MAXMRU;
-    ao->neg_asyncmap = 1;
-    ao->neg_chap = 1;
-    ao->chap_mdtype = CHAP_DIGEST_MD5;
-    ao->neg_upap = 1;
-    ao->neg_magicnumber = 1;
-    ao->neg_pcompression = 1;
-    ao->neg_accompression = 1;
-#ifdef CBCP_SUPPORT
-    ao->neg_cbcp = 1;
-#endif
-    ao->neg_endpoint = 1;
-}
-
-
-/*
- * lcp_open - LCP is allowed to come up.
- */
-void
-lcp_open(unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-    lcp_options *wo = &lcp_wantoptions[unit];
-
-    f->flags &= ~(OPT_PASSIVE | OPT_SILENT);
-    if (wo->passive)
-	f->flags |= OPT_PASSIVE;
-    if (wo->silent)
-	f->flags |= OPT_SILENT;
-    fsm_open(f);
-}
-
-
-/*
- * lcp_close - Take LCP down.
- */
-void
-lcp_close(unit, reason)
-    int unit;
-    char *reason;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    if (phase != PHASE_DEAD)
-	new_phase(PHASE_TERMINATE);
-    if (f->state == STOPPED && f->flags & (OPT_PASSIVE|OPT_SILENT)) {
-	/*
-	 * This action is not strictly according to the FSM in RFC1548,
-	 * but it does mean that the program terminates if you do a
-	 * lcp_close() in passive/silent mode when a connection hasn't
-	 * been established.
-	 */
-	f->state = CLOSED;
-	lcp_finished(f);
-
-    } else
-	fsm_close(&lcp_fsm[unit], reason);
-}
-
-
-/*
- * lcp_lowerup - The lower layer is up.
- */
-void
-lcp_lowerup(unit)
-    int unit;
-{
-    lcp_options *wo = &lcp_wantoptions[unit];
-    fsm *f = &lcp_fsm[unit];
-
-    /*
-     * Don't use A/C or protocol compression on transmission,
-     * but accept A/C and protocol compressed packets
-     * if we are going to ask for A/C and protocol compression.
-     */
-    ppp_send_config(unit, PPP_MRU, 0xffffffff, 0, 0);
-    ppp_recv_config(unit, PPP_MRU, (lax_recv? 0: 0xffffffff),
-		    wo->neg_pcompression, wo->neg_accompression);
-    peer_mru[unit] = PPP_MRU;
-
-    if (listen_time != 0) {
-	f->flags |= DELAYED_UP;
-	timeout(lcp_delayed_up, f, 0, listen_time * 1000);
-    } else
-	fsm_lowerup(f);
-}
-
-
-/*
- * lcp_lowerdown - The lower layer is down.
- */
-void
-lcp_lowerdown(unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    if (f->flags & DELAYED_UP)
-	f->flags &= ~DELAYED_UP;
-    else
-	fsm_lowerdown(&lcp_fsm[unit]);
-}
-
-
-/*
- * lcp_delayed_up - Bring the lower layer up now.
- */
-static void
-lcp_delayed_up(arg)
-    void *arg;
-{
-    fsm *f = arg;
-
-    if (f->flags & DELAYED_UP) {
-	f->flags &= ~DELAYED_UP;
-	fsm_lowerup(f);
-    }
-}
-
-
-/*
- * lcp_input - Input LCP packet.
- */
-static void
-lcp_input(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    if (f->flags & DELAYED_UP) {
-	f->flags &= ~DELAYED_UP;
-	fsm_lowerup(f);
-    }
-    fsm_input(f, p, len);
-}
-
-
-/*
- * lcp_extcode - Handle a LCP-specific code.
- */
-static int
-lcp_extcode(f, code, id, inp, len)
-    fsm *f;
-    int code, id;
-    u_char *inp;
-    int len;
-{
-    u_char *magp;
-
-    switch( code ){
-    case PROTREJ:
-	lcp_rprotrej(f, inp, len);
-	break;
-    
-    case ECHOREQ:
-	if (f->state != OPENED)
-	    break;
-	magp = inp;
-	PUTLONG(lcp_gotoptions[f->unit].magicnumber, magp);
-	fsm_sdata(f, ECHOREP, id, inp, len);
-	break;
-    
-    case ECHOREP:
-	lcp_received_echo_reply(f, id, inp, len);
-	break;
-
-    case DISCREQ:
-	break;
-
-    default:
-	return 0;
-    }
-    return 1;
-}
-
-    
-/*
- * lcp_rprotrej - Receive an Protocol-Reject.
- *
- * Figure out which protocol is rejected and inform it.
- */
-static void
-lcp_rprotrej(f, inp, len)
-    fsm *f;
-    u_char *inp;
-    int len;
-{
-    int i;
-    struct protent *protp;
-    u_short prot;
-
-    if (len < 2) {
-	LCPDEBUG(("lcp_rprotrej: Rcvd short Protocol-Reject packet!"));
-	return;
-    }
-
-    GETSHORT(prot, inp);
-
-    /*
-     * Protocol-Reject packets received in any state other than the LCP
-     * OPENED state SHOULD be silently discarded.
-     */
-    if( f->state != OPENED ){
-	LCPDEBUG(("Protocol-Reject discarded: LCP in state %d", f->state));
-	return;
-    }
-
-    /*
-     * Upcall the proper Protocol-Reject routine.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->protocol == prot && protp->enabled_flag) {
-	    (*protp->protrej)(f->unit);
-	    return;
-	}
-
-    warn("Protocol-Reject for unsupported protocol 0x%x", prot);
-}
-
-
-/*
- * lcp_protrej - A Protocol-Reject was received.
- */
-/*ARGSUSED*/
-static void
-lcp_protrej(unit)
-    int unit;
-{
-    /*
-     * Can't reject LCP!
-     */
-    error("Received Protocol-Reject for LCP!");
-    fsm_protreject(&lcp_fsm[unit]);
-}
-
-
-/*
- * lcp_sprotrej - Send a Protocol-Reject for some protocol.
- */
-void
-lcp_sprotrej(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    /*
-     * Send back the protocol and the information field of the
-     * rejected packet.  We only get here if LCP is in the OPENED state.
-     */
-    p += 2;
-    len -= 2;
-
-    fsm_sdata(&lcp_fsm[unit], PROTREJ, ++lcp_fsm[unit].id,
-	      p, len);
-}
-
-
-/*
- * lcp_resetci - Reset our CI.
- */
-static void
-lcp_resetci(f)
-    fsm *f;
-{
-    lcp_options *wo = &lcp_wantoptions[f->unit];
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    lcp_options *ao = &lcp_allowoptions[f->unit];
-
-    wo->magicnumber = magic();
-    wo->numloops = 0;
-    *go = *wo;
-    if (!multilink) {
-	go->neg_mrru = 0;
-	go->neg_ssnhf = 0;
-	go->neg_endpoint = 0;
-    }
-    if (noendpoint)
-	ao->neg_endpoint = 0;
-    peer_mru[f->unit] = PPP_MRU;
-    auth_reset(f->unit);
-}
-
-
-/*
- * lcp_cilen - Return length of our CI.
- */
-static int
-lcp_cilen(f)
-    fsm *f;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-
-#define LENCIVOID(neg)	((neg) ? CILEN_VOID : 0)
-#define LENCICHAP(neg)	((neg) ? CILEN_CHAP : 0)
-#define LENCISHORT(neg)	((neg) ? CILEN_SHORT : 0)
-#define LENCILONG(neg)	((neg) ? CILEN_LONG : 0)
-#define LENCILQR(neg)	((neg) ? CILEN_LQR: 0)
-#define LENCICBCP(neg)	((neg) ? CILEN_CBCP: 0)
-    /*
-     * NB: we only ask for one of CHAP and UPAP, even if we will
-     * accept either.
-     */
-    return (LENCISHORT(go->neg_mru && go->mru != DEFMRU) +
-	    LENCILONG(go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF) +
-	    LENCICHAP(go->neg_chap) +
-	    LENCISHORT(!go->neg_chap && go->neg_upap) +
-	    LENCILQR(go->neg_lqr) +
-	    LENCICBCP(go->neg_cbcp) +
-	    LENCILONG(go->neg_magicnumber) +
-	    LENCIVOID(go->neg_pcompression) +
-	    LENCIVOID(go->neg_accompression) +
-	    LENCISHORT(go->neg_mrru) +
-	    LENCIVOID(go->neg_ssnhf) +
-	    (go->neg_endpoint? CILEN_CHAR + go->endpoint.length: 0));
-}
-
-
-/*
- * lcp_addci - Add our desired CIs to a packet.
- */
-static void
-lcp_addci(f, ucp, lenp)
-    fsm *f;
-    u_char *ucp;
-    int *lenp;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    u_char *start_ucp = ucp;
-
-#define ADDCIVOID(opt, neg) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_VOID, ucp); \
-    }
-#define ADDCISHORT(opt, neg, val) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_SHORT, ucp); \
-	PUTSHORT(val, ucp); \
-    }
-#define ADDCICHAP(opt, neg, val, digest) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_CHAP, ucp); \
-	PUTSHORT(val, ucp); \
-	PUTCHAR(digest, ucp); \
-    }
-#define ADDCILONG(opt, neg, val) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_LONG, ucp); \
-	PUTLONG(val, ucp); \
-    }
-#define ADDCILQR(opt, neg, val) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_LQR, ucp); \
-	PUTSHORT(PPP_LQR, ucp); \
-	PUTLONG(val, ucp); \
-    }
-#define ADDCICHAR(opt, neg, val) \
-    if (neg) { \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_CHAR, ucp); \
-	PUTCHAR(val, ucp); \
-    }
-#define ADDCIENDP(opt, neg, class, val, len) \
-    if (neg) { \
-	int i; \
-	PUTCHAR(opt, ucp); \
-	PUTCHAR(CILEN_CHAR + len, ucp); \
-	PUTCHAR(class, ucp); \
-	for (i = 0; i < len; ++i) \
-	    PUTCHAR(val[i], ucp); \
-    }
-
-    ADDCISHORT(CI_MRU, go->neg_mru && go->mru != DEFMRU, go->mru);
-    ADDCILONG(CI_ASYNCMAP, go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF,
-	      go->asyncmap);
-    ADDCICHAP(CI_AUTHTYPE, go->neg_chap, PPP_CHAP, go->chap_mdtype);
-    ADDCISHORT(CI_AUTHTYPE, !go->neg_chap && go->neg_upap, PPP_PAP);
-    ADDCILQR(CI_QUALITY, go->neg_lqr, go->lqr_period);
-    ADDCICHAR(CI_CALLBACK, go->neg_cbcp, CBCP_OPT);
-    ADDCILONG(CI_MAGICNUMBER, go->neg_magicnumber, go->magicnumber);
-    ADDCIVOID(CI_PCOMPRESSION, go->neg_pcompression);
-    ADDCIVOID(CI_ACCOMPRESSION, go->neg_accompression);
-    ADDCISHORT(CI_MRRU, go->neg_mrru, go->mrru);
-    ADDCIVOID(CI_SSNHF, go->neg_ssnhf);
-    ADDCIENDP(CI_EPDISC, go->neg_endpoint, go->endpoint.class,
-	      go->endpoint.value, go->endpoint.length);
-
-    if (ucp - start_ucp != *lenp) {
-	/* this should never happen, because peer_mtu should be 1500 */
-	error("Bug in lcp_addci: wrong length");
-    }
-}
-
-
-/*
- * lcp_ackci - Ack our CIs.
- * This should not modify any state if the Ack is bad.
- *
- * Returns:
- *	0 - Ack was bad.
- *	1 - Ack was good.
- */
-static int
-lcp_ackci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    u_char cilen, citype, cichar;
-    u_short cishort;
-    u_int32_t cilong;
-
-    /*
-     * CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define ACKCIVOID(opt, neg) \
-    if (neg) { \
-	if ((len -= CILEN_VOID) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_VOID || \
-	    citype != opt) \
-	    goto bad; \
-    }
-#define ACKCISHORT(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_SHORT) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_SHORT || \
-	    citype != opt) \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != val) \
-	    goto bad; \
-    }
-#define ACKCICHAR(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_CHAR) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_CHAR || \
-	    citype != opt) \
-	    goto bad; \
-	GETCHAR(cichar, p); \
-	if (cichar != val) \
-	    goto bad; \
-    }
-#define ACKCICHAP(opt, neg, val, digest) \
-    if (neg) { \
-	if ((len -= CILEN_CHAP) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_CHAP || \
-	    citype != opt) \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != val) \
-	    goto bad; \
-	GETCHAR(cichar, p); \
-	if (cichar != digest) \
-	  goto bad; \
-    }
-#define ACKCILONG(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_LONG) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_LONG || \
-	    citype != opt) \
-	    goto bad; \
-	GETLONG(cilong, p); \
-	if (cilong != val) \
-	    goto bad; \
-    }
-#define ACKCILQR(opt, neg, val) \
-    if (neg) { \
-	if ((len -= CILEN_LQR) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_LQR || \
-	    citype != opt) \
-	    goto bad; \
-	GETSHORT(cishort, p); \
-	if (cishort != PPP_LQR) \
-	    goto bad; \
-	GETLONG(cilong, p); \
-	if (cilong != val) \
-	  goto bad; \
-    }
-#define ACKCIENDP(opt, neg, class, val, vlen) \
-    if (neg) { \
-	int i; \
-	if ((len -= CILEN_CHAR + vlen) < 0) \
-	    goto bad; \
-	GETCHAR(citype, p); \
-	GETCHAR(cilen, p); \
-	if (cilen != CILEN_CHAR + vlen || \
-	    citype != opt) \
-	    goto bad; \
-	GETCHAR(cichar, p); \
-	if (cichar != class) \
-	    goto bad; \
-	for (i = 0; i < vlen; ++i) { \
-	    GETCHAR(cichar, p); \
-	    if (cichar != val[i]) \
-		goto bad; \
-	} \
-    }
-
-    ACKCISHORT(CI_MRU, go->neg_mru && go->mru != DEFMRU, go->mru);
-    ACKCILONG(CI_ASYNCMAP, go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF,
-	      go->asyncmap);
-    ACKCICHAP(CI_AUTHTYPE, go->neg_chap, PPP_CHAP, go->chap_mdtype);
-    ACKCISHORT(CI_AUTHTYPE, !go->neg_chap && go->neg_upap, PPP_PAP);
-    ACKCILQR(CI_QUALITY, go->neg_lqr, go->lqr_period);
-    ACKCICHAR(CI_CALLBACK, go->neg_cbcp, CBCP_OPT);
-    ACKCILONG(CI_MAGICNUMBER, go->neg_magicnumber, go->magicnumber);
-    ACKCIVOID(CI_PCOMPRESSION, go->neg_pcompression);
-    ACKCIVOID(CI_ACCOMPRESSION, go->neg_accompression);
-    ACKCISHORT(CI_MRRU, go->neg_mrru, go->mrru);
-    ACKCIVOID(CI_SSNHF, go->neg_ssnhf);
-    ACKCIENDP(CI_EPDISC, go->neg_endpoint, go->endpoint.class,
-	      go->endpoint.value, go->endpoint.length);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    return (1);
-bad:
-    LCPDEBUG(("lcp_acki: received bad Ack!"));
-    return (0);
-}
-
-
-/*
- * lcp_nakci - Peer has sent a NAK for some of our CIs.
- * This should not modify any state if the Nak is bad
- * or if LCP is in the OPENED state.
- *
- * Returns:
- *	0 - Nak was bad.
- *	1 - Nak was good.
- */
-static int
-lcp_nakci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    lcp_options *wo = &lcp_wantoptions[f->unit];
-    u_char citype, cichar, *next;
-    u_short cishort;
-    u_int32_t cilong;
-    lcp_options no;		/* options we've seen Naks for */
-    lcp_options try;		/* options to request next time */
-    int looped_back = 0;
-    int cilen;
-
-    BZERO(&no, sizeof(no));
-    try = *go;
-
-    /*
-     * Any Nak'd CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define NAKCIVOID(opt, neg) \
-    if (go->neg && \
-	len >= CILEN_VOID && \
-	p[1] == CILEN_VOID && \
-	p[0] == opt) { \
-	len -= CILEN_VOID; \
-	INCPTR(CILEN_VOID, p); \
-	no.neg = 1; \
-	try.neg = 0; \
-    }
-#define NAKCICHAP(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_CHAP && \
-	p[1] == CILEN_CHAP && \
-	p[0] == opt) { \
-	len -= CILEN_CHAP; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	GETCHAR(cichar, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCICHAR(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_CHAR && \
-	p[1] == CILEN_CHAR && \
-	p[0] == opt) { \
-	len -= CILEN_CHAR; \
-	INCPTR(2, p); \
-	GETCHAR(cichar, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCISHORT(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_SHORT && \
-	p[1] == CILEN_SHORT && \
-	p[0] == opt) { \
-	len -= CILEN_SHORT; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCILONG(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_LONG && \
-	p[1] == CILEN_LONG && \
-	p[0] == opt) { \
-	len -= CILEN_LONG; \
-	INCPTR(2, p); \
-	GETLONG(cilong, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCILQR(opt, neg, code) \
-    if (go->neg && \
-	len >= CILEN_LQR && \
-	p[1] == CILEN_LQR && \
-	p[0] == opt) { \
-	len -= CILEN_LQR; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	GETLONG(cilong, p); \
-	no.neg = 1; \
-	code \
-    }
-#define NAKCIENDP(opt, neg) \
-    if (go->neg && \
-	len >= CILEN_CHAR && \
-	p[0] == opt && \
-	p[1] >= CILEN_CHAR && \
-	p[1] <= len) { \
-	len -= p[1]; \
-	INCPTR(p[1], p); \
-	no.neg = 1; \
-	try.neg = 0; \
-    }
-
-    /*
-     * We don't care if they want to send us smaller packets than
-     * we want.  Therefore, accept any MRU less than what we asked for,
-     * but then ignore the new value when setting the MRU in the kernel.
-     * If they send us a bigger MRU than what we asked, accept it, up to
-     * the limit of the default MRU we'd get if we didn't negotiate.
-     */
-    if (go->neg_mru && go->mru != DEFMRU) {
-	NAKCISHORT(CI_MRU, neg_mru,
-		   if (cishort <= wo->mru || cishort <= DEFMRU)
-		       try.mru = cishort;
-		   );
-    }
-
-    /*
-     * Add any characters they want to our (receive-side) asyncmap.
-     */
-    if (go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF) {
-	NAKCILONG(CI_ASYNCMAP, neg_asyncmap,
-		  try.asyncmap = go->asyncmap | cilong;
-		  );
-    }
-
-    /*
-     * If they've nak'd our authentication-protocol, check whether
-     * they are proposing a different protocol, or a different
-     * hash algorithm for CHAP.
-     */
-    if ((go->neg_chap || go->neg_upap)
-	&& len >= CILEN_SHORT
-	&& p[0] == CI_AUTHTYPE && p[1] >= CILEN_SHORT && p[1] <= len) {
-	cilen = p[1];
-	len -= cilen;
-	no.neg_chap = go->neg_chap;
-	no.neg_upap = go->neg_upap;
-	INCPTR(2, p);
-        GETSHORT(cishort, p);
-	if (cishort == PPP_PAP && cilen == CILEN_SHORT) {
-	    /*
-	     * If we were asking for CHAP, they obviously don't want to do it.
-	     * If we weren't asking for CHAP, then we were asking for PAP,
-	     * in which case this Nak is bad.
-	     */
-	    if (!go->neg_chap)
-		goto bad;
-	    try.neg_chap = 0;
-
-	} else if (cishort == PPP_CHAP && cilen == CILEN_CHAP) {
-	    GETCHAR(cichar, p);
-	    if (go->neg_chap) {
-		/*
-		 * We were asking for CHAP/MD5; they must want a different
-		 * algorithm.  If they can't do MD5, we can ask for M$-CHAP
-		 * if we support it, otherwise we'll have to stop
-		 * asking for CHAP.
-		 */
-		if (cichar != go->chap_mdtype) {
-#ifdef CHAPMS
-		    if (cichar == CHAP_MICROSOFT)
-			go->chap_mdtype = CHAP_MICROSOFT;
-		    else
-#endif /* CHAPMS */
-			try.neg_chap = 0;
-		}
-	    } else {
-		/*
-		 * Stop asking for PAP if we were asking for it.
-		 */
-		try.neg_upap = 0;
-	    }
-
-	} else {
-	    /*
-	     * We don't recognize what they're suggesting.
-	     * Stop asking for what we were asking for.
-	     */
-	    if (go->neg_chap)
-		try.neg_chap = 0;
-	    else
-		try.neg_upap = 0;
-	    p += cilen - CILEN_SHORT;
-	}
-    }
-
-    /*
-     * If they can't cope with our link quality protocol, we'll have
-     * to stop asking for LQR.  We haven't got any other protocol.
-     * If they Nak the reporting period, take their value XXX ?
-     */
-    NAKCILQR(CI_QUALITY, neg_lqr,
-	     if (cishort != PPP_LQR)
-		 try.neg_lqr = 0;
-	     else
-		 try.lqr_period = cilong;
-	     );
-
-    /*
-     * Only implementing CBCP...not the rest of the callback options
-     */
-    NAKCICHAR(CI_CALLBACK, neg_cbcp,
-              try.neg_cbcp = 0;
-              );
-
-    /*
-     * Check for a looped-back line.
-     */
-    NAKCILONG(CI_MAGICNUMBER, neg_magicnumber,
-	      try.magicnumber = magic();
-	      looped_back = 1;
-	      );
-
-    /*
-     * Peer shouldn't send Nak for protocol compression or
-     * address/control compression requests; they should send
-     * a Reject instead.  If they send a Nak, treat it as a Reject.
-     */
-    NAKCIVOID(CI_PCOMPRESSION, neg_pcompression);
-    NAKCIVOID(CI_ACCOMPRESSION, neg_accompression);
-
-    /*
-     * Nak for MRRU option - accept their value if it is smaller
-     * than the one we want.
-     */
-    if (go->neg_mrru) {
-	NAKCISHORT(CI_MRRU, neg_mrru,
-		   if (cishort <= wo->mrru)
-		       try.mrru = cishort;
-		   );
-    }
-
-    /*
-     * Nak for short sequence numbers shouldn't be sent, treat it
-     * like a reject.
-     */
-    NAKCIVOID(CI_SSNHF, neg_ssnhf);
-
-    /*
-     * Nak of the endpoint discriminator option is not permitted,
-     * treat it like a reject.
-     */
-    NAKCIENDP(CI_EPDISC, neg_endpoint);
-
-    /*
-     * There may be remaining CIs, if the peer is requesting negotiation
-     * on an option that we didn't include in our request packet.
-     * If we see an option that we requested, or one we've already seen
-     * in this packet, then this packet is bad.
-     * If we wanted to respond by starting to negotiate on the requested
-     * option(s), we could, but we don't, because except for the
-     * authentication type and quality protocol, if we are not negotiating
-     * an option, it is because we were told not to.
-     * For the authentication type, the Nak from the peer means
-     * `let me authenticate myself with you' which is a bit pointless.
-     * For the quality protocol, the Nak means `ask me to send you quality
-     * reports', but if we didn't ask for them, we don't want them.
-     * An option we don't recognize represents the peer asking to
-     * negotiate some option we don't support, so ignore it.
-     */
-    while (len > CILEN_VOID) {
-	GETCHAR(citype, p);
-	GETCHAR(cilen, p);
-	if (cilen < CILEN_VOID || (len -= cilen) < 0)
-	    goto bad;
-	next = p + cilen - 2;
-
-	switch (citype) {
-	case CI_MRU:
-	    if ((go->neg_mru && go->mru != DEFMRU)
-		|| no.neg_mru || cilen != CILEN_SHORT)
-		goto bad;
-	    GETSHORT(cishort, p);
-	    if (cishort < DEFMRU) {
-		try.neg_mru = 1;
-		try.mru = cishort;
-	    }
-	    break;
-	case CI_ASYNCMAP:
-	    if ((go->neg_asyncmap && go->asyncmap != 0xFFFFFFFF)
-		|| no.neg_asyncmap || cilen != CILEN_LONG)
-		goto bad;
-	    break;
-	case CI_AUTHTYPE:
-	    if (go->neg_chap || no.neg_chap || go->neg_upap || no.neg_upap)
-		goto bad;
-	    break;
-	case CI_MAGICNUMBER:
-	    if (go->neg_magicnumber || no.neg_magicnumber ||
-		cilen != CILEN_LONG)
-		goto bad;
-	    break;
-	case CI_PCOMPRESSION:
-	    if (go->neg_pcompression || no.neg_pcompression
-		|| cilen != CILEN_VOID)
-		goto bad;
-	    break;
-	case CI_ACCOMPRESSION:
-	    if (go->neg_accompression || no.neg_accompression
-		|| cilen != CILEN_VOID)
-		goto bad;
-	    break;
-	case CI_QUALITY:
-	    if (go->neg_lqr || no.neg_lqr || cilen != CILEN_LQR)
-		goto bad;
-	    break;
-	case CI_MRRU:
-	    if (go->neg_mrru || no.neg_mrru || cilen != CILEN_SHORT)
-		goto bad;
-	    break;
-	case CI_SSNHF:
-	    if (go->neg_ssnhf || no.neg_ssnhf || cilen != CILEN_VOID)
-		goto bad;
-	    try.neg_ssnhf = 1;
-	    break;
-	case CI_EPDISC:
-	    if (go->neg_endpoint || no.neg_endpoint || cilen < CILEN_CHAR)
-		goto bad;
-	    break;
-	}
-	p = next;
-    }
-
-    /*
-     * OK, the Nak is good.  Now we can update state.
-     * If there are any options left we ignore them.
-     */
-    if (f->state != OPENED) {
-	if (looped_back) {
-	    if (++try.numloops >= lcp_loopbackfail) {
-		notice("Serial line is looped back.");
-		lcp_close(f->unit, "Loopback detected");
-		status = EXIT_LOOPBACK;
-	    }
-	} else
-	    try.numloops = 0;
-	*go = try;
-    }
-
-    return 1;
-
-bad:
-    LCPDEBUG(("lcp_nakci: received bad Nak!"));
-    return 0;
-}
-
-
-/*
- * lcp_rejci - Peer has Rejected some of our CIs.
- * This should not modify any state if the Reject is bad
- * or if LCP is in the OPENED state.
- *
- * Returns:
- *	0 - Reject was bad.
- *	1 - Reject was good.
- */
-static int
-lcp_rejci(f, p, len)
-    fsm *f;
-    u_char *p;
-    int len;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    u_char cichar;
-    u_short cishort;
-    u_int32_t cilong;
-    lcp_options try;		/* options to request next time */
-
-    try = *go;
-
-    /*
-     * Any Rejected CIs must be in exactly the same order that we sent.
-     * Check packet length and CI length at each step.
-     * If we find any deviations, then this packet is bad.
-     */
-#define REJCIVOID(opt, neg) \
-    if (go->neg && \
-	len >= CILEN_VOID && \
-	p[1] == CILEN_VOID && \
-	p[0] == opt) { \
-	len -= CILEN_VOID; \
-	INCPTR(CILEN_VOID, p); \
-	try.neg = 0; \
-    }
-#define REJCISHORT(opt, neg, val) \
-    if (go->neg && \
-	len >= CILEN_SHORT && \
-	p[1] == CILEN_SHORT && \
-	p[0] == opt) { \
-	len -= CILEN_SHORT; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	/* Check rejected value. */ \
-	if (cishort != val) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-#define REJCICHAP(opt, neg, val, digest) \
-    if (go->neg && \
-	len >= CILEN_CHAP && \
-	p[1] == CILEN_CHAP && \
-	p[0] == opt) { \
-	len -= CILEN_CHAP; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	GETCHAR(cichar, p); \
-	/* Check rejected value. */ \
-	if (cishort != val || cichar != digest) \
-	    goto bad; \
-	try.neg = 0; \
-	try.neg_upap = 0; \
-    }
-#define REJCILONG(opt, neg, val) \
-    if (go->neg && \
-	len >= CILEN_LONG && \
-	p[1] == CILEN_LONG && \
-	p[0] == opt) { \
-	len -= CILEN_LONG; \
-	INCPTR(2, p); \
-	GETLONG(cilong, p); \
-	/* Check rejected value. */ \
-	if (cilong != val) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-#define REJCILQR(opt, neg, val) \
-    if (go->neg && \
-	len >= CILEN_LQR && \
-	p[1] == CILEN_LQR && \
-	p[0] == opt) { \
-	len -= CILEN_LQR; \
-	INCPTR(2, p); \
-	GETSHORT(cishort, p); \
-	GETLONG(cilong, p); \
-	/* Check rejected value. */ \
-	if (cishort != PPP_LQR || cilong != val) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-#define REJCICBCP(opt, neg, val) \
-    if (go->neg && \
-	len >= CILEN_CBCP && \
-	p[1] == CILEN_CBCP && \
-	p[0] == opt) { \
-	len -= CILEN_CBCP; \
-	INCPTR(2, p); \
-	GETCHAR(cichar, p); \
-	/* Check rejected value. */ \
-	if (cichar != val) \
-	    goto bad; \
-	try.neg = 0; \
-    }
-#define REJCIENDP(opt, neg, class, val, vlen) \
-    if (go->neg && \
-	len >= CILEN_CHAR + vlen && \
-	p[0] == opt && \
-	p[1] == CILEN_CHAR + vlen) { \
-	int i; \
-	len -= CILEN_CHAR + vlen; \
-	INCPTR(2, p); \
-	GETCHAR(cichar, p); \
-	if (cichar != class) \
-	    goto bad; \
-	for (i = 0; i < vlen; ++i) { \
-	    GETCHAR(cichar, p); \
-	    if (cichar != val[i]) \
-		goto bad; \
-	} \
-	try.neg = 0; \
-    }
-
-    REJCISHORT(CI_MRU, neg_mru, go->mru);
-    REJCILONG(CI_ASYNCMAP, neg_asyncmap, go->asyncmap);
-    REJCICHAP(CI_AUTHTYPE, neg_chap, PPP_CHAP, go->chap_mdtype);
-    if (!go->neg_chap) {
-	REJCISHORT(CI_AUTHTYPE, neg_upap, PPP_PAP);
-    }
-    REJCILQR(CI_QUALITY, neg_lqr, go->lqr_period);
-    REJCICBCP(CI_CALLBACK, neg_cbcp, CBCP_OPT);
-    REJCILONG(CI_MAGICNUMBER, neg_magicnumber, go->magicnumber);
-    REJCIVOID(CI_PCOMPRESSION, neg_pcompression);
-    REJCIVOID(CI_ACCOMPRESSION, neg_accompression);
-    REJCISHORT(CI_MRRU, neg_mrru, go->mrru);
-    REJCIVOID(CI_SSNHF, neg_ssnhf);
-    REJCIENDP(CI_EPDISC, neg_endpoint, go->endpoint.class,
-	      go->endpoint.value, go->endpoint.length);
-
-    /*
-     * If there are any remaining CIs, then this packet is bad.
-     */
-    if (len != 0)
-	goto bad;
-    /*
-     * Now we can update state.
-     */
-    if (f->state != OPENED)
-	*go = try;
-    return 1;
-
-bad:
-    LCPDEBUG(("lcp_rejci: received bad Reject!"));
-    return 0;
-}
-
-
-/*
- * lcp_reqci - Check the peer's requested CIs and send appropriate response.
- *
- * Returns: CONFACK, CONFNAK or CONFREJ and input packet modified
- * appropriately.  If reject_if_disagree is non-zero, doesn't return
- * CONFNAK; returns CONFREJ if it can't return CONFACK.
- */
-static int
-lcp_reqci(f, inp, lenp, reject_if_disagree)
-    fsm *f;
-    u_char *inp;		/* Requested CIs */
-    int *lenp;			/* Length of requested CIs */
-    int reject_if_disagree;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    lcp_options *ho = &lcp_hisoptions[f->unit];
-    lcp_options *ao = &lcp_allowoptions[f->unit];
-    u_char *cip, *next;		/* Pointer to current and next CIs */
-    int cilen, citype, cichar;	/* Parsed len, type, char value */
-    u_short cishort;		/* Parsed short value */
-    u_int32_t cilong;		/* Parse long value */
-    int rc = CONFACK;		/* Final packet return code */
-    int orc;			/* Individual option return code */
-    u_char *p;			/* Pointer to next char to parse */
-    u_char *rejp;		/* Pointer to next char in reject frame */
-    u_char *nakp;		/* Pointer to next char in Nak frame */
-    int l = *lenp;		/* Length left */
-
-    /*
-     * Reset all his options.
-     */
-    BZERO(ho, sizeof(*ho));
-
-    /*
-     * Process all his options.
-     */
-    next = inp;
-    nakp = nak_buffer;
-    rejp = inp;
-    while (l) {
-	orc = CONFACK;			/* Assume success */
-	cip = p = next;			/* Remember begining of CI */
-	if (l < 2 ||			/* Not enough data for CI header or */
-	    p[1] < 2 ||			/*  CI length too small or */
-	    p[1] > l) {			/*  CI length too big? */
-	    LCPDEBUG(("lcp_reqci: bad CI length!"));
-	    orc = CONFREJ;		/* Reject bad CI */
-	    cilen = l;			/* Reject till end of packet */
-	    l = 0;			/* Don't loop again */
-	    citype = 0;
-	    goto endswitch;
-	}
-	GETCHAR(citype, p);		/* Parse CI type */
-	GETCHAR(cilen, p);		/* Parse CI length */
-	l -= cilen;			/* Adjust remaining length */
-	next += cilen;			/* Step to next CI */
-
-	switch (citype) {		/* Check CI type */
-	case CI_MRU:
-	    if (!ao->neg_mru ||		/* Allow option? */
-		cilen != CILEN_SHORT) {	/* Check CI length */
-		orc = CONFREJ;		/* Reject CI */
-		break;
-	    }
-	    GETSHORT(cishort, p);	/* Parse MRU */
-
-	    /*
-	     * He must be able to receive at least our minimum.
-	     * No need to check a maximum.  If he sends a large number,
-	     * we'll just ignore it.
-	     */
-	    if (cishort < MINMRU) {
-		orc = CONFNAK;		/* Nak CI */
-		PUTCHAR(CI_MRU, nakp);
-		PUTCHAR(CILEN_SHORT, nakp);
-		PUTSHORT(MINMRU, nakp);	/* Give him a hint */
-		break;
-	    }
-	    ho->neg_mru = 1;		/* Remember he sent MRU */
-	    ho->mru = cishort;		/* And remember value */
-	    break;
-
-	case CI_ASYNCMAP:
-	    if (!ao->neg_asyncmap ||
-		cilen != CILEN_LONG) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETLONG(cilong, p);
-
-	    /*
-	     * Asyncmap must have set at least the bits
-	     * which are set in lcp_allowoptions[unit].asyncmap.
-	     */
-	    if ((ao->asyncmap & ~cilong) != 0) {
-		orc = CONFNAK;
-		PUTCHAR(CI_ASYNCMAP, nakp);
-		PUTCHAR(CILEN_LONG, nakp);
-		PUTLONG(ao->asyncmap | cilong, nakp);
-		break;
-	    }
-	    ho->neg_asyncmap = 1;
-	    ho->asyncmap = cilong;
-	    break;
-
-	case CI_AUTHTYPE:
-	    if (cilen < CILEN_SHORT ||
-		!(ao->neg_upap || ao->neg_chap)) {
-		/*
-		 * Reject the option if we're not willing to authenticate.
-		 */
-		orc = CONFREJ;
-		break;
-	    }
-	    GETSHORT(cishort, p);
-
-	    /*
-	     * Authtype must be PAP or CHAP.
-	     *
-	     * Note: if both ao->neg_upap and ao->neg_chap are set,
-	     * and the peer sends a Configure-Request with two
-	     * authenticate-protocol requests, one for CHAP and one
-	     * for UPAP, then we will reject the second request.
-	     * Whether we end up doing CHAP or UPAP depends then on
-	     * the ordering of the CIs in the peer's Configure-Request.
-	     */
-
-	    if (cishort == PPP_PAP) {
-		if (ho->neg_chap ||	/* we've already accepted CHAP */
-		    cilen != CILEN_SHORT) {
-		    LCPDEBUG(("lcp_reqci: rcvd AUTHTYPE PAP, rejecting..."));
-		    orc = CONFREJ;
-		    break;
-		}
-		if (!ao->neg_upap) {	/* we don't want to do PAP */
-		    orc = CONFNAK;	/* NAK it and suggest CHAP */
-		    PUTCHAR(CI_AUTHTYPE, nakp);
-		    PUTCHAR(CILEN_CHAP, nakp);
-		    PUTSHORT(PPP_CHAP, nakp);
-		    PUTCHAR(ao->chap_mdtype, nakp);
-		    /* XXX if we can do CHAP_MICROSOFT as well, we should
-		       probably put in another option saying so */
-		    break;
-		}
-		ho->neg_upap = 1;
-		break;
-	    }
-	    if (cishort == PPP_CHAP) {
-		if (ho->neg_upap ||	/* we've already accepted PAP */
-		    cilen != CILEN_CHAP) {
-		    LCPDEBUG(("lcp_reqci: rcvd AUTHTYPE CHAP, rejecting..."));
-		    orc = CONFREJ;
-		    break;
-		}
-		if (!ao->neg_chap) {	/* we don't want to do CHAP */
-		    orc = CONFNAK;	/* NAK it and suggest PAP */
-		    PUTCHAR(CI_AUTHTYPE, nakp);
-		    PUTCHAR(CILEN_SHORT, nakp);
-		    PUTSHORT(PPP_PAP, nakp);
-		    break;
-		}
-		GETCHAR(cichar, p);	/* get digest type*/
-		if (cichar != CHAP_DIGEST_MD5
-#ifdef CHAPMS
-		    && cichar != CHAP_MICROSOFT
-#endif
-		    ) {
-		    orc = CONFNAK;
-		    PUTCHAR(CI_AUTHTYPE, nakp);
-		    PUTCHAR(CILEN_CHAP, nakp);
-		    PUTSHORT(PPP_CHAP, nakp);
-		    PUTCHAR(ao->chap_mdtype, nakp);
-		    break;
-		}
-		ho->chap_mdtype = cichar; /* save md type */
-		ho->neg_chap = 1;
-		break;
-	    }
-
-	    /*
-	     * We don't recognize the protocol they're asking for.
-	     * Nak it with something we're willing to do.
-	     * (At this point we know ao->neg_upap || ao->neg_chap.)
-	     */
-	    orc = CONFNAK;
-	    PUTCHAR(CI_AUTHTYPE, nakp);
-	    if (ao->neg_chap) {
-		PUTCHAR(CILEN_CHAP, nakp);
-		PUTSHORT(PPP_CHAP, nakp);
-		PUTCHAR(ao->chap_mdtype, nakp);
-	    } else {
-		PUTCHAR(CILEN_SHORT, nakp);
-		PUTSHORT(PPP_PAP, nakp);
-	    }
-	    break;
-
-	case CI_QUALITY:
-	    if (!ao->neg_lqr ||
-		cilen != CILEN_LQR) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    GETSHORT(cishort, p);
-	    GETLONG(cilong, p);
-
-	    /*
-	     * Check the protocol and the reporting period.
-	     * XXX When should we Nak this, and what with?
-	     */
-	    if (cishort != PPP_LQR) {
-		orc = CONFNAK;
-		PUTCHAR(CI_QUALITY, nakp);
-		PUTCHAR(CILEN_LQR, nakp);
-		PUTSHORT(PPP_LQR, nakp);
-		PUTLONG(ao->lqr_period, nakp);
-		break;
-	    }
-	    break;
-
-	case CI_MAGICNUMBER:
-	    if (!(ao->neg_magicnumber || go->neg_magicnumber) ||
-		cilen != CILEN_LONG) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETLONG(cilong, p);
-
-	    /*
-	     * He must have a different magic number.
-	     */
-	    if (go->neg_magicnumber &&
-		cilong == go->magicnumber) {
-		cilong = magic();	/* Don't put magic() inside macro! */
-		orc = CONFNAK;
-		PUTCHAR(CI_MAGICNUMBER, nakp);
-		PUTCHAR(CILEN_LONG, nakp);
-		PUTLONG(cilong, nakp);
-		break;
-	    }
-	    ho->neg_magicnumber = 1;
-	    ho->magicnumber = cilong;
-	    break;
-
-
-	case CI_PCOMPRESSION:
-	    if (!ao->neg_pcompression ||
-		cilen != CILEN_VOID) {
-		orc = CONFREJ;
-		break;
-	    }
-	    ho->neg_pcompression = 1;
-	    break;
-
-	case CI_ACCOMPRESSION:
-	    if (!ao->neg_accompression ||
-		cilen != CILEN_VOID) {
-		orc = CONFREJ;
-		break;
-	    }
-	    ho->neg_accompression = 1;
-	    break;
-
-	case CI_MRRU:
-	    if (!ao->neg_mrru || !multilink ||
-		cilen != CILEN_SHORT) {
-		orc = CONFREJ;
-		break;
-	    }
-
-	    GETSHORT(cishort, p);
-	    /* possibly should insist on a minimum/maximum MRRU here */
-	    ho->neg_mrru = 1;
-	    ho->mrru = cishort;
-	    break;
-
-	case CI_SSNHF:
-	    if (!ao->neg_ssnhf || !multilink ||
-		cilen != CILEN_VOID) {
-		orc = CONFREJ;
-		break;
-	    }
-	    ho->neg_ssnhf = 1;
-	    break;
-
-	case CI_EPDISC:
-	    if (!ao->neg_endpoint ||
-		cilen < CILEN_CHAR ||
-		cilen > CILEN_CHAR + MAX_ENDP_LEN) {
-		orc = CONFREJ;
-		break;
-	    }
-	    GETCHAR(cichar, p);
-	    cilen -= CILEN_CHAR;
-	    ho->neg_endpoint = 1;
-	    ho->endpoint.class = cichar;
-	    ho->endpoint.length = cilen;
-	    BCOPY(p, ho->endpoint.value, cilen);
-	    INCPTR(cilen, p);
-	    break;
-
-	default:
-	    LCPDEBUG(("lcp_reqci: rcvd unknown option %d", citype));
-	    orc = CONFREJ;
-	    break;
-	}
-
-endswitch:
-	if (orc == CONFACK &&		/* Good CI */
-	    rc != CONFACK)		/*  but prior CI wasnt? */
-	    continue;			/* Don't send this one */
-
-	if (orc == CONFNAK) {		/* Nak this CI? */
-	    if (reject_if_disagree	/* Getting fed up with sending NAKs? */
-		&& citype != CI_MAGICNUMBER) {
-		orc = CONFREJ;		/* Get tough if so */
-	    } else {
-		if (rc == CONFREJ)	/* Rejecting prior CI? */
-		    continue;		/* Don't send this one */
-		rc = CONFNAK;
-	    }
-	}
-	if (orc == CONFREJ) {		/* Reject this CI */
-	    rc = CONFREJ;
-	    if (cip != rejp)		/* Need to move rejected CI? */
-		BCOPY(cip, rejp, cilen); /* Move it */
-	    INCPTR(cilen, rejp);	/* Update output pointer */
-	}
-    }
-
-    /*
-     * If we wanted to send additional NAKs (for unsent CIs), the
-     * code would go here.  The extra NAKs would go at *nakp.
-     * At present there are no cases where we want to ask the
-     * peer to negotiate an option.
-     */
-
-    switch (rc) {
-    case CONFACK:
-	*lenp = next - inp;
-	break;
-    case CONFNAK:
-	/*
-	 * Copy the Nak'd options from the nak_buffer to the caller's buffer.
-	 */
-	*lenp = nakp - nak_buffer;
-	BCOPY(nak_buffer, inp, *lenp);
-	break;
-    case CONFREJ:
-	*lenp = rejp - inp;
-	break;
-    }
-
-    LCPDEBUG(("lcp_reqci: returning CONF%s.", CODENAME(rc)));
-    return (rc);			/* Return final code */
-}
-
-
-/*
- * lcp_up - LCP has come UP.
- */
-static void
-lcp_up(f)
-    fsm *f;
-{
-    lcp_options *wo = &lcp_wantoptions[f->unit];
-    lcp_options *ho = &lcp_hisoptions[f->unit];
-    lcp_options *go = &lcp_gotoptions[f->unit];
-    lcp_options *ao = &lcp_allowoptions[f->unit];
-    int mtu;
-
-    if (!go->neg_magicnumber)
-	go->magicnumber = 0;
-    if (!ho->neg_magicnumber)
-	ho->magicnumber = 0;
-
-    /*
-     * Set our MTU to the smaller of the MTU we wanted and
-     * the MRU our peer wanted.  If we negotiated an MRU,
-     * set our MRU to the larger of value we wanted and
-     * the value we got in the negotiation.
-     * Note on the MTU: the link MTU can be the MRU the peer wanted,
-     * the interface MTU is set to the lower of that and the
-     * MTU we want to use.
-     */
-    mtu = ho->neg_mru? ho->mru: PPP_MRU;
-#ifdef HAVE_MULTILINK
-    if (!(multilink && go->neg_mrru && ho->neg_mrru))
-#endif /* HAVE_MULTILINK */
-	netif_set_mtu(f->unit, MIN(mtu, ao->mru));
-    ppp_send_config(f->unit, mtu,
-		    (ho->neg_asyncmap? ho->asyncmap: 0xffffffff),
-		    ho->neg_pcompression, ho->neg_accompression);
-    ppp_recv_config(f->unit, (go->neg_mru? MAX(wo->mru, go->mru): PPP_MRU),
-		    (lax_recv? 0: go->neg_asyncmap? go->asyncmap: 0xffffffff),
-		    go->neg_pcompression, go->neg_accompression);
-
-    if (ho->neg_mru)
-	peer_mru[f->unit] = ho->mru;
-
-    lcp_echo_lowerup(f->unit);  /* Enable echo messages */
-
-    link_established(f->unit);
-}
-
-
-/*
- * lcp_down - LCP has gone DOWN.
- *
- * Alert other protocols.
- */
-static void
-lcp_down(f)
-    fsm *f;
-{
-    lcp_options *go = &lcp_gotoptions[f->unit];
-
-    lcp_echo_lowerdown(f->unit);
-
-    link_down(f->unit);
-
-    ppp_send_config(f->unit, PPP_MRU, 0xffffffff, 0, 0);
-    ppp_recv_config(f->unit, PPP_MRU,
-		    (go->neg_asyncmap? go->asyncmap: 0xffffffff),
-		    go->neg_pcompression, go->neg_accompression);
-    peer_mru[f->unit] = PPP_MRU;
-}
-
-
-/*
- * lcp_starting - LCP needs the lower layer up.
- */
-static void
-lcp_starting(f)
-    fsm *f;
-{
-    link_required(f->unit);
-}
-
-
-/*
- * lcp_finished - LCP has finished with the lower layer.
- */
-static void
-lcp_finished(f)
-    fsm *f;
-{
-    link_terminated(f->unit);
-}
-
-
-/*
- * lcp_printpkt - print the contents of an LCP packet.
- */
-static char *lcp_codenames[] = {
-    "ConfReq", "ConfAck", "ConfNak", "ConfRej",
-    "TermReq", "TermAck", "CodeRej", "ProtRej",
-    "EchoReq", "EchoRep", "DiscReq"
-};
-
-static int
-lcp_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len, olen, i;
-    u_char *pstart, *optend;
-    u_short cishort;
-    u_int32_t cilong;
-
-    if (plen < HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(lcp_codenames) / sizeof(char *))
-	printer(arg, " %s", lcp_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= HEADERLEN;
-    switch (code) {
-    case CONFREQ:
-    case CONFACK:
-    case CONFNAK:
-    case CONFREJ:
-	/* print option list */
-	while (len >= 2) {
-	    GETCHAR(code, p);
-	    GETCHAR(olen, p);
-	    p -= 2;
-	    if (olen < 2 || olen > len) {
-		break;
-	    }
-	    printer(arg, " <");
-	    len -= olen;
-	    optend = p + olen;
-	    switch (code) {
-	    case CI_MRU:
-		if (olen == CILEN_SHORT) {
-		    p += 2;
-		    GETSHORT(cishort, p);
-		    printer(arg, "mru %d", cishort);
-		}
-		break;
-	    case CI_ASYNCMAP:
-		if (olen == CILEN_LONG) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer(arg, "asyncmap 0x%x", cilong);
-		}
-		break;
-	    case CI_AUTHTYPE:
-		if (olen >= CILEN_SHORT) {
-		    p += 2;
-		    printer(arg, "auth ");
-		    GETSHORT(cishort, p);
-		    switch (cishort) {
-		    case PPP_PAP:
-			printer(arg, "pap");
-			break;
-		    case PPP_CHAP:
-			printer(arg, "chap");
-			if (p < optend) {
-			    switch (*p) {
-			    case CHAP_DIGEST_MD5:
-				printer(arg, " MD5");
-				++p;
-				break;
-#ifdef CHAPMS
-			    case CHAP_MICROSOFT:
-				printer(arg, " m$oft");
-				++p;
-				break;
-#endif
-			    }
-			}
-			break;
-		    default:
-			printer(arg, "0x%x", cishort);
-		    }
-		}
-		break;
-	    case CI_QUALITY:
-		if (olen >= CILEN_SHORT) {
-		    p += 2;
-		    printer(arg, "quality ");
-		    GETSHORT(cishort, p);
-		    switch (cishort) {
-		    case PPP_LQR:
-			printer(arg, "lqr");
-			break;
-		    default:
-			printer(arg, "0x%x", cishort);
-		    }
-		}
-		break;
-	    case CI_CALLBACK:
-		if (olen >= CILEN_CHAR) {
-		    p += 2;
-		    printer(arg, "callback ");
-		    GETCHAR(cishort, p);
-		    switch (cishort) {
-		    case CBCP_OPT:
-			printer(arg, "CBCP");
-			break;
-		    default:
-			printer(arg, "0x%x", cishort);
-		    }
-		}
-		break;
-	    case CI_MAGICNUMBER:
-		if (olen == CILEN_LONG) {
-		    p += 2;
-		    GETLONG(cilong, p);
-		    printer(arg, "magic 0x%x", cilong);
-		}
-		break;
-	    case CI_PCOMPRESSION:
-		if (olen == CILEN_VOID) {
-		    p += 2;
-		    printer(arg, "pcomp");
-		}
-		break;
-	    case CI_ACCOMPRESSION:
-		if (olen == CILEN_VOID) {
-		    p += 2;
-		    printer(arg, "accomp");
-		}
-		break;
-	    case CI_MRRU:
-		if (olen == CILEN_SHORT) {
-		    p += 2;
-		    GETSHORT(cishort, p);
-		    printer(arg, "mrru %d", cishort);
-		}
-		break;
-	    case CI_SSNHF:
-		if (olen == CILEN_VOID) {
-		    p += 2;
-		    printer(arg, "ssnhf");
-		}
-		break;
-	    case CI_EPDISC:
-#ifdef HAVE_MULTILINK
-		if (olen >= CILEN_CHAR) {
-		    struct epdisc epd;
-		    p += 2;
-		    GETCHAR(epd.class, p);
-		    epd.length = olen - CILEN_CHAR;
-		    if (epd.length > MAX_ENDP_LEN)
-			epd.length = MAX_ENDP_LEN;
-		    if (epd.length > 0) {
-			BCOPY(p, epd.value, epd.length);
-			p += epd.length;
-		    }
-		    printer(arg, "endpoint [%s]", epdisc_to_str(&epd));
-		}
-#else
-		printer(arg, "endpoint");
-#endif
-		break;
-	    }
-	    while (p < optend) {
-		GETCHAR(code, p);
-		printer(arg, " %.2x", code);
-	    }
-	    printer(arg, ">");
-	}
-	break;
-
-    case TERMACK:
-    case TERMREQ:
-	if (len > 0 && *p >= ' ' && *p < 0x7f) {
-	    printer(arg, " ");
-	    print_string((char *)p, len, printer, arg);
-	    p += len;
-	    len = 0;
-	}
-	break;
-
-    case ECHOREQ:
-    case ECHOREP:
-    case DISCREQ:
-	if (len >= 4) {
-	    GETLONG(cilong, p);
-	    printer(arg, " magic=0x%x", cilong);
-	    p += 4;
-	    len -= 4;
-	}
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (i = 0; i < len && i < 32; ++i) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-    if (i < len) {
-	printer(arg, " ...");
-	p += len - i;
-    }
-
-    return p - pstart;
-}
-
-/*
- * Time to shut down the link because there is nothing out there.
- */
-
-static
-void LcpLinkFailure (f)
-    fsm *f;
-{
-    if (f->state == OPENED) {
-	info("No response to %d echo-requests", lcp_echos_pending);
-        notice("Serial link appears to be disconnected.");
-        lcp_close(f->unit, "Peer not responding");
-	status = EXIT_PEER_DEAD;
-    }
-}
-
-/*
- * Timer expired for the LCP echo requests from this process.
- */
-
-static void
-LcpEchoCheck (f)
-    fsm *f;
-{
-    LcpSendEchoRequest (f);
-    if (f->state != OPENED)
-	return;
-
-    /*
-     * Start the timer for the next interval.
-     */
-    if (lcp_echo_timer_running)
-	warn("assertion lcp_echo_timer_running==0 failed");
-    TIMEOUT (LcpEchoTimeout, f, lcp_echo_interval);
-    lcp_echo_timer_running = 1;
-}
-
-/*
- * LcpEchoTimeout - Timer expired on the LCP echo
- */
-
-static void
-LcpEchoTimeout (arg)
-    void *arg;
-{
-    if (lcp_echo_timer_running != 0) {
-        lcp_echo_timer_running = 0;
-        LcpEchoCheck ((fsm *) arg);
-    }
-}
-
-/*
- * LcpEchoReply - LCP has received a reply to the echo
- */
-
-static void
-lcp_received_echo_reply (f, id, inp, len)
-    fsm *f;
-    int id;
-    u_char *inp;
-    int len;
-{
-    u_int32_t magic;
-
-    /* Check the magic number - don't count replies from ourselves. */
-    if (len < 4) {
-	dbglog("lcp: received short Echo-Reply, length %d", len);
-	return;
-    }
-    GETLONG(magic, inp);
-    if (lcp_gotoptions[f->unit].neg_magicnumber
-	&& magic == lcp_gotoptions[f->unit].magicnumber) {
-	warn("appear to have received our own echo-reply!");
-	return;
-    }
-
-    /* Reset the number of outstanding echo frames */
-    lcp_echos_pending = 0;
-}
-
-/*
- * LcpSendEchoRequest - Send an echo request frame to the peer
- */
-
-static void
-LcpSendEchoRequest (f)
-    fsm *f;
-{
-    u_int32_t lcp_magic;
-    u_char pkt[4], *pktp;
-
-    /*
-     * Detect the failure of the peer at this point.
-     */
-    if (lcp_echo_fails != 0) {
-        if (lcp_echos_pending >= lcp_echo_fails) {
-            LcpLinkFailure(f);
-	    lcp_echos_pending = 0;
-	}
-    }
-
-    /*
-     * Make and send the echo request frame.
-     */
-    if (f->state == OPENED) {
-        lcp_magic = lcp_gotoptions[f->unit].magicnumber;
-	pktp = pkt;
-	PUTLONG(lcp_magic, pktp);
-        fsm_sdata(f, ECHOREQ, lcp_echo_number++ & 0xFF, pkt, pktp - pkt);
-	++lcp_echos_pending;
-    }
-}
-
-/*
- * lcp_echo_lowerup - Start the timer for the LCP frame
- */
-
-static void
-lcp_echo_lowerup (unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    /* Clear the parameters for generating echo frames */
-    lcp_echos_pending      = 0;
-    lcp_echo_number        = 0;
-    lcp_echo_timer_running = 0;
-  
-    /* If a timeout interval is specified then start the timer */
-    if (lcp_echo_interval != 0)
-        LcpEchoCheck (f);
-}
-
-/*
- * lcp_echo_lowerdown - Stop the timer for the LCP frame
- */
-
-static void
-lcp_echo_lowerdown (unit)
-    int unit;
-{
-    fsm *f = &lcp_fsm[unit];
-
-    if (lcp_echo_timer_running != 0) {
-        UNTIMEOUT (LcpEchoTimeout, f);
-        lcp_echo_timer_running = 0;
-    }
-}
diff --git a/mdk-stage1/ppp/pppd/lcp.h b/mdk-stage1/ppp/pppd/lcp.h
deleted file mode 100644
index b87a9295e..000000000
--- a/mdk-stage1/ppp/pppd/lcp.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * lcp.h - Link Control Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Options.
- */
-#define CI_MRU		1	/* Maximum Receive Unit */
-#define CI_ASYNCMAP	2	/* Async Control Character Map */
-#define CI_AUTHTYPE	3	/* Authentication Type */
-#define CI_QUALITY	4	/* Quality Protocol */
-#define CI_MAGICNUMBER	5	/* Magic Number */
-#define CI_PCOMPRESSION	7	/* Protocol Field Compression */
-#define CI_ACCOMPRESSION 8	/* Address/Control Field Compression */
-#define CI_CALLBACK	13	/* callback */
-#define CI_MRRU		17	/* max reconstructed receive unit; multilink */
-#define CI_SSNHF	18	/* short sequence numbers for multilink */
-#define CI_EPDISC	19	/* endpoint discriminator */
-
-/*
- * LCP-specific packet types.
- */
-#define PROTREJ		8	/* Protocol Reject */
-#define ECHOREQ		9	/* Echo Request */
-#define ECHOREP		10	/* Echo Reply */
-#define DISCREQ		11	/* Discard Request */
-#define CBCP_OPT	6	/* Use callback control protocol */
-
-/*
- * The state of options is described by an lcp_options structure.
- */
-typedef struct lcp_options {
-    bool passive;		/* Don't die if we don't get a response */
-    bool silent;		/* Wait for the other end to start first */
-    bool restart;		/* Restart vs. exit after close */
-    bool neg_mru;		/* Negotiate the MRU? */
-    bool neg_asyncmap;		/* Negotiate the async map? */
-    bool neg_upap;		/* Ask for UPAP authentication? */
-    bool neg_chap;		/* Ask for CHAP authentication? */
-    bool neg_magicnumber;	/* Ask for magic number? */
-    bool neg_pcompression;	/* HDLC Protocol Field Compression? */
-    bool neg_accompression;	/* HDLC Address/Control Field Compression? */
-    bool neg_lqr;		/* Negotiate use of Link Quality Reports */
-    bool neg_cbcp;		/* Negotiate use of CBCP */
-    bool neg_mrru;		/* negotiate multilink MRRU */
-    bool neg_ssnhf;		/* negotiate short sequence numbers */
-    bool neg_endpoint;		/* negotiate endpoint discriminator */
-    int  mru;			/* Value of MRU */
-    int	 mrru;			/* Value of MRRU, and multilink enable */
-    u_char chap_mdtype;		/* which MD type (hashing algorithm) */
-    u_int32_t asyncmap;		/* Value of async map */
-    u_int32_t magicnumber;
-    int  numloops;		/* Number of loops during magic number neg. */
-    u_int32_t lqr_period;	/* Reporting period for LQR 1/100ths second */
-    struct epdisc endpoint;	/* endpoint discriminator */
-} lcp_options;
-
-extern fsm lcp_fsm[];
-extern lcp_options lcp_wantoptions[];
-extern lcp_options lcp_gotoptions[];
-extern lcp_options lcp_allowoptions[];
-extern lcp_options lcp_hisoptions[];
-
-#define DEFMRU	1500		/* Try for this */
-#define MINMRU	128		/* No MRUs below this */
-#define MAXMRU	16384		/* Normally limit MRU to this */
-
-void lcp_open __P((int));
-void lcp_close __P((int, char *));
-void lcp_lowerup __P((int));
-void lcp_lowerdown __P((int));
-void lcp_sprotrej __P((int, u_char *, int));	/* send protocol reject */
-
-extern struct protent lcp_protent;
-
-/* Default number of times we receive our magic number from the peer
-   before deciding the link is looped-back. */
-#define DEFLOOPBACKFAIL	10
diff --git a/mdk-stage1/ppp/pppd/magic.c b/mdk-stage1/ppp/pppd/magic.c
deleted file mode 100644
index 1682dee03..000000000
--- a/mdk-stage1/ppp/pppd/magic.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * magic.c - PPP Magic Number routines.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/time.h>
-
-#include "pppd.h"
-#include "magic.h"
-
-static const char rcsid[] = RCSID;
-
-extern long mrand48 __P((void));
-extern void srand48 __P((long));
-
-/*
- * magic_init - Initialize the magic number generator.
- *
- * Attempts to compute a random number seed which will not repeat.
- * The current method uses the current hostid, current process ID
- * and current time, currently.
- */
-void
-magic_init()
-{
-    long seed;
-    struct timeval t;
-
-    gettimeofday(&t, NULL);
-    seed = get_host_seed() ^ t.tv_sec ^ t.tv_usec ^ getpid();
-    srand48(seed);
-}
-
-/*
- * magic - Returns the next magic number.
- */
-u_int32_t
-magic()
-{
-    return (u_int32_t) mrand48();
-}
-
-#ifdef NO_DRAND48
-/*
- * Substitute procedures for those systems which don't have
- * drand48 et al.
- */
-
-double
-drand48()
-{
-    return (double)random() / (double)0x7fffffffL; /* 2**31-1 */
-}
-
-long
-mrand48()
-{
-    return random();
-}
-
-void
-srand48(seedval)
-long seedval;
-{
-    srandom((int)seedval);
-}
-
-#endif
diff --git a/mdk-stage1/ppp/pppd/magic.h b/mdk-stage1/ppp/pppd/magic.h
deleted file mode 100644
index 1344626a3..000000000
--- a/mdk-stage1/ppp/pppd/magic.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * magic.h - PPP Magic Number definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-void magic_init __P((void));	/* Initialize the magic number generator */
-u_int32_t magic __P((void));	/* Returns the next magic number */
diff --git a/mdk-stage1/ppp/pppd/main.c b/mdk-stage1/ppp/pppd/main.c
deleted file mode 100644
index c074938cd..000000000
--- a/mdk-stage1/ppp/pppd/main.c
+++ /dev/null
@@ -1,1846 +0,0 @@
-/*
- * main.c - Point-to-Point Protocol main module
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <setjmp.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "magic.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#ifdef INET6
-#include "ipv6cp.h"
-#endif
-#include "upap.h"
-#include "chap.h"
-#include "ccp.h"
-#include "pathnames.h"
-#include "tdb.h"
-
-#ifdef CBCP_SUPPORT
-#include "cbcp.h"
-#endif
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#endif /* IPX_CHANGE */
-#ifdef AT_CHANGE
-#include "atcp.h"
-#endif
-
-static const char rcsid[] = RCSID;
-
-/* interface vars */
-char ifname[32];		/* Interface name */
-int ifunit;			/* Interface unit number */
-
-struct channel *the_channel;
-
-char *progname;			/* Name of this program */
-char hostname[MAXNAMELEN];	/* Our hostname */
-static char pidfilename[MAXPATHLEN];	/* name of pid file */
-static char linkpidfile[MAXPATHLEN];	/* name of linkname pid file */
-char ppp_devnam[MAXPATHLEN];	/* name of PPP tty (maybe ttypx) */
-uid_t uid;			/* Our real user-id */
-struct notifier *pidchange = NULL;
-struct notifier *phasechange = NULL;
-struct notifier *exitnotify = NULL;
-struct notifier *sigreceived = NULL;
-
-int hungup;			/* terminal has been hung up */
-int privileged;			/* we're running as real uid root */
-int need_holdoff;		/* need holdoff period before restarting */
-int detached;			/* have detached from terminal */
-volatile int status;		/* exit status for pppd */
-int unsuccess;			/* # unsuccessful connection attempts */
-int do_callback;		/* != 0 if we should do callback next */
-int doing_callback;		/* != 0 if we are doing callback */
-TDB_CONTEXT *pppdb;		/* database for storing status etc. */
-char db_key[32];
-
-int (*holdoff_hook) __P((void)) = NULL;
-int (*new_phase_hook) __P((int)) = NULL;
-
-static int conn_running;	/* we have a [dis]connector running */
-static int devfd;		/* fd of underlying device */
-static int fd_ppp = -1;		/* fd for talking PPP */
-static int fd_loop;		/* fd for getting demand-dial packets */
-
-int phase;			/* where the link is at */
-int kill_link;
-int open_ccp_flag;
-int listen_time;
-int got_sigusr2;
-int got_sigterm;
-int got_sighup;
-
-static int waiting;
-static sigjmp_buf sigjmp;
-
-char **script_env;		/* Env. variable values for scripts */
-int s_env_nalloc;		/* # words avail at script_env */
-
-u_char outpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for outgoing packet */
-u_char inpacket_buf[PPP_MRU+PPP_HDRLEN]; /* buffer for incoming packet */
-
-static int n_children;		/* # child processes still running */
-static int got_sigchld;		/* set if we have received a SIGCHLD */
-
-int privopen;			/* don't lock, open device as root */
-
-char *no_ppp_msg = "Sorry - this system lacks PPP kernel support\n";
-
-GIDSET_TYPE groups[NGROUPS_MAX];/* groups the user is in */
-int ngroups;			/* How many groups valid in groups */
-
-static struct timeval start_time;	/* Time when link was started. */
-
-struct pppd_stats link_stats;
-int link_connect_time;
-int link_stats_valid;
-
-/*
- * We maintain a list of child process pids and
- * functions to call when they exit.
- */
-struct subprocess {
-    pid_t	pid;
-    char	*prog;
-    void	(*done) __P((void *));
-    void	*arg;
-    struct subprocess *next;
-};
-
-static struct subprocess *children;
-
-/* Prototypes for procedures local to this file. */
-
-static void setup_signals __P((void));
-static void create_pidfile __P((void));
-static void create_linkpidfile __P((void));
-static void cleanup __P((void));
-static void get_input __P((void));
-static void calltimeout __P((void));
-static struct timeval *timeleft __P((struct timeval *));
-static void kill_my_pg __P((int));
-static void hup __P((int));
-static void term __P((int));
-static void chld __P((int));
-static void toggle_debug __P((int));
-static void open_ccp __P((int));
-static void bad_signal __P((int));
-static void holdoff_end __P((void *));
-static int reap_kids __P((int waitfor));
-static void update_db_entry __P((void));
-static void add_db_key __P((const char *));
-static void delete_db_key __P((const char *));
-static void cleanup_db __P((void));
-static void handle_events __P((void));
-
-extern	char	*ttyname __P((int));
-extern	char	*getlogin __P((void));
-int main __P((int, char *[]));
-
-#ifdef ultrix
-#undef	O_NONBLOCK
-#define	O_NONBLOCK	O_NDELAY
-#endif
-
-#ifdef ULTRIX
-#define setlogmask(x)
-#endif
-
-/*
- * PPP Data Link Layer "protocol" table.
- * One entry per supported protocol.
- * The last entry must be NULL.
- */
-struct protent *protocols[] = {
-    &lcp_protent,
-    &pap_protent,
-    &chap_protent,
-#ifdef CBCP_SUPPORT
-    &cbcp_protent,
-#endif
-    &ipcp_protent,
-#ifdef INET6
-    &ipv6cp_protent,
-#endif
-    &ccp_protent,
-#ifdef IPX_CHANGE
-    &ipxcp_protent,
-#endif
-#ifdef AT_CHANGE
-    &atcp_protent,
-#endif
-    NULL
-};
-
-/*
- * If PPP_DRV_NAME is not defined, use the default "ppp" as the device name.
- */
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME	"ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-int
-main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    int i, t;
-    char *p;
-    struct passwd *pw;
-    struct protent *protp;
-    char numbuf[16];
-
-    new_phase(PHASE_INITIALIZE);
-
-    /*
-     * Ensure that fds 0, 1, 2 are open, to /dev/null if nowhere else.
-     * This way we can close 0, 1, 2 in detach() without clobbering
-     * a fd that we are using.
-     */
-    if ((i = open("/dev/null", O_RDWR)) >= 0) {
-	while (0 <= i && i <= 2)
-	    i = dup(i);
-	if (i >= 0)
-	    close(i);
-    }
-
-    script_env = NULL;
-
-    /* Initialize syslog facilities */
-    reopen_log();
-
-    if (gethostname(hostname, MAXNAMELEN) < 0 ) {
-	option_error("Couldn't get hostname: %m");
-	exit(1);
-    }
-    hostname[MAXNAMELEN-1] = 0;
-
-    /* make sure we don't create world or group writable files. */
-    umask(umask(0777) | 022);
-
-    uid = getuid();
-    privileged = uid == 0;
-    slprintf(numbuf, sizeof(numbuf), "%d", uid);
-    script_setenv("ORIG_UID", numbuf, 0);
-
-    ngroups = getgroups(NGROUPS_MAX, groups);
-
-    /*
-     * Initialize magic number generator now so that protocols may
-     * use magic numbers in initialization.
-     */
-    magic_init();
-
-    /*
-     * Initialize each protocol.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-        (*protp->init)(0);
-
-    /*
-     * Initialize the default channel.
-     */
-    tty_init();
-
-    progname = *argv;
-
-    /*
-     * Parse, in order, the system options file, the user's options file,
-     * and the command line arguments.
-     */
-    if (!options_from_file(_PATH_SYSOPTIONS, !privileged, 0, 1)
-	|| !options_from_user()
-	|| !parse_args(argc-1, argv+1))
-	exit(EXIT_OPTION_ERROR);
-    devnam_fixed = 1;		/* can no longer change device name */
-
-    /*
-     * Work out the device name, if it hasn't already been specified,
-     * and parse the tty's options file.
-     */
-    if (the_channel->process_extra_options)
-	(*the_channel->process_extra_options)();
-
-    if (debug)
-	setlogmask(LOG_UPTO(LOG_DEBUG));
-
-    /*
-     * Check that we are running as root.
-     */
-    if (geteuid() != 0) {
-	option_error("must be root to run %s, since it is not setuid-root",
-		     argv[0]);
-	exit(EXIT_NOT_ROOT);
-    }
-
-    if (!ppp_available()) {
-	option_error("%s", no_ppp_msg);
-	exit(EXIT_NO_KERNEL_SUPPORT);
-    }
-
-    /*
-     * Check that the options given are valid and consistent.
-     */
-    check_options();
-    if (!sys_check_options())
-	exit(EXIT_OPTION_ERROR);
-    auth_check_options();
-#ifdef HAVE_MULTILINK
-    mp_check_options();
-#endif
-    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	if (protp->check_options != NULL)
-	    (*protp->check_options)();
-    if (the_channel->check_options)
-	(*the_channel->check_options)();
-
-
-    if (dump_options || dryrun) {
-	init_pr_log(NULL, LOG_INFO);
-	print_options(pr_log, NULL);
-	end_pr_log();
-	if (dryrun)
-	    die(0);
-    }
-
-    /*
-     * Initialize system-dependent stuff.
-     */
-    sys_init();
-
-    pppdb = tdb_open(_PATH_PPPDB, 0, 0, O_RDWR|O_CREAT, 0644);
-    if (pppdb != NULL) {
-	slprintf(db_key, sizeof(db_key), "pppd%d", getpid());
-	update_db_entry();
-    } else {
-	warn("Warning: couldn't open ppp database %s", _PATH_PPPDB);
-	if (multilink) {
-	    warn("Warning: disabling multilink");
-	    multilink = 0;
-	}
-    }
-
-    /*
-     * Detach ourselves from the terminal, if required,
-     * and identify who is running us.
-     */
-    if (!nodetach && !updetach)
-	detach();
-    p = getlogin();
-    if (p == NULL) {
-	pw = getpwuid(uid);
-	if (pw != NULL && pw->pw_name != NULL)
-	    p = pw->pw_name;
-	else
-	    p = "(unknown)";
-    }
-    syslog(LOG_NOTICE, "pppd %s started by %s, uid %d", VERSION, p, uid);
-    script_setenv("PPPLOGNAME", p, 0);
-
-    if (devnam[0])
-	script_setenv("DEVICE", devnam, 1);
-    slprintf(numbuf, sizeof(numbuf), "%d", getpid());
-    script_setenv("PPPD_PID", numbuf, 1);
-
-    setup_signals();
-
-    waiting = 0;
-
-    create_linkpidfile();
-
-    /*
-     * If we're doing dial-on-demand, set up the interface now.
-     */
-    if (demand) {
-	/*
-	 * Open the loopback channel and set it up to be the ppp interface.
-	 */
-	tdb_writelock(pppdb);
-	fd_loop = open_ppp_loopback();
-	set_ifunit(1);
-	tdb_writeunlock(pppdb);
-
-	/*
-	 * Configure the interface and mark it up, etc.
-	 */
-	demand_conf();
-    }
-
-    do_callback = 0;
-    for (;;) {
-
-	listen_time = 0;
-	need_holdoff = 1;
-	devfd = -1;
-	status = EXIT_OK;
-	++unsuccess;
-	doing_callback = do_callback;
-	do_callback = 0;
-
-	if (demand && !doing_callback) {
-	    /*
-	     * Don't do anything until we see some activity.
-	     */
-	    new_phase(PHASE_DORMANT);
-	    demand_unblock();
-	    add_fd(fd_loop);
-	    for (;;) {
-		handle_events();
-		if (kill_link && !persist)
-		    break;
-		if (get_loop_output())
-		    break;
-	    }
-	    remove_fd(fd_loop);
-	    if (kill_link && !persist)
-		break;
-
-	    /*
-	     * Now we want to bring up the link.
-	     */
-	    demand_block();
-	    info("Starting link");
-	}
-
-	new_phase(PHASE_SERIALCONN);
-
-	devfd = the_channel->connect();
-	if (devfd < 0)
-	    goto fail;
-
-	/* set up the serial device as a ppp interface */
-	tdb_writelock(pppdb);
-	fd_ppp = the_channel->establish_ppp(devfd);
-	if (fd_ppp < 0) {
-	    tdb_writeunlock(pppdb);
-	    status = EXIT_FATAL_ERROR;
-	    goto disconnect;
-	}
-
-	if (!demand && ifunit >= 0)
-	    set_ifunit(1);
-	tdb_writeunlock(pppdb);
-
-	/*
-	 * Start opening the connection and wait for
-	 * incoming events (reply, timeout, etc.).
-	 */
-	notice("Connect: %s <--> %s", ifname, ppp_devnam);
-	gettimeofday(&start_time, NULL);
-	link_stats_valid = 0;
-	script_unsetenv("CONNECT_TIME");
-	script_unsetenv("BYTES_SENT");
-	script_unsetenv("BYTES_RCVD");
-	lcp_lowerup(0);
-
-	add_fd(fd_ppp);
-	lcp_open(0);		/* Start protocol */
-	status = EXIT_NEGOTIATION_FAILED;
-	new_phase(PHASE_ESTABLISH);
-	while (phase != PHASE_DEAD) {
-	    handle_events();
-	    get_input();
-	    if (kill_link)
-		lcp_close(0, "User request");
-	    if (open_ccp_flag) {
-		if (phase == PHASE_NETWORK || phase == PHASE_RUNNING) {
-		    ccp_fsm[0].flags = OPT_RESTART; /* clears OPT_SILENT */
-		    (*ccp_protent.open)(0);
-		}
-	    }
-	}
-
-	/*
-	 * Print connect time and statistics.
-	 */
-	if (link_stats_valid) {
-	    int t = (link_connect_time + 5) / 6;    /* 1/10ths of minutes */
-	    info("Connect time %d.%d minutes.", t/10, t%10);
-	    info("Sent %u bytes, received %u bytes.",
-		 link_stats.bytes_out, link_stats.bytes_in);
-	}
-
-	/*
-	 * Delete pid file before disestablishing ppp.  Otherwise it
-	 * can happen that another pppd gets the same unit and then
-	 * we delete its pid file.
-	 */
-	if (!demand) {
-	    if (pidfilename[0] != 0
-		&& unlink(pidfilename) < 0 && errno != ENOENT) 
-		warn("unable to delete pid file %s: %m", pidfilename);
-	    pidfilename[0] = 0;
-	}
-
-	/*
-	 * If we may want to bring the link up again, transfer
-	 * the ppp unit back to the loopback.  Set the
-	 * real serial device back to its normal mode of operation.
-	 */
-	remove_fd(fd_ppp);
-	clean_check();
-	the_channel->disestablish_ppp(devfd);
-	fd_ppp = -1;
-	if (!hungup)
-	    lcp_lowerdown(0);
-	if (!demand)
-	    script_unsetenv("IFNAME");
-
-	/*
-	 * Run disconnector script, if requested.
-	 * XXX we may not be able to do this if the line has hung up!
-	 */
-    disconnect:
-	new_phase(PHASE_DISCONNECT);
-	the_channel->disconnect();
-
-    fail:
-	if (the_channel->cleanup)
-	    (*the_channel->cleanup)();
-
-	if (!demand) {
-	    if (pidfilename[0] != 0
-		&& unlink(pidfilename) < 0 && errno != ENOENT) 
-		warn("unable to delete pid file %s: %m", pidfilename);
-	    pidfilename[0] = 0;
-	}
-
-	if (!persist || (maxfail > 0 && unsuccess >= maxfail))
-	    break;
-
-	if (demand)
-	    demand_discard();
-	t = need_holdoff? holdoff: 0;
-	if (holdoff_hook)
-	    t = (*holdoff_hook)();
-	if (t > 0) {
-	    new_phase(PHASE_HOLDOFF);
-	    TIMEOUT(holdoff_end, NULL, t);
-	    do {
-		handle_events();
-		if (kill_link)
-		    new_phase(PHASE_DORMANT); /* allow signal to end holdoff */
-	    } while (phase == PHASE_HOLDOFF);
-	    if (!persist)
-		break;
-	}
-    }
-
-    /* Wait for scripts to finish */
-    /* XXX should have a timeout here */
-    while (n_children > 0) {
-	if (debug) {
-	    struct subprocess *chp;
-	    dbglog("Waiting for %d child processes...", n_children);
-	    for (chp = children; chp != NULL; chp = chp->next)
-		dbglog("  script %s, pid %d", chp->prog, chp->pid);
-	}
-	if (reap_kids(1) < 0)
-	    break;
-    }
-
-    die(status);
-    return 0;
-}
-
-/*
- * handle_events - wait for something to happen and respond to it.
- */
-static void
-handle_events()
-{
-    struct timeval timo;
-    sigset_t mask;
-
-    kill_link = open_ccp_flag = 0;
-    if (sigsetjmp(sigjmp, 1) == 0) {
-	sigprocmask(SIG_BLOCK, &mask, NULL);
-	if (got_sighup || got_sigterm || got_sigusr2 || got_sigchld) {
-	    sigprocmask(SIG_UNBLOCK, &mask, NULL);
-	} else {
-	    waiting = 1;
-	    sigprocmask(SIG_UNBLOCK, &mask, NULL);
-	    wait_input(timeleft(&timo));
-	}
-    }
-    waiting = 0;
-    calltimeout();
-    if (got_sighup) {
-	kill_link = 1;
-	got_sighup = 0;
-	if (status != EXIT_HANGUP)
-	    status = EXIT_USER_REQUEST;
-    }
-    if (got_sigterm) {
-	kill_link = 1;
-	persist = 0;
-	status = EXIT_USER_REQUEST;
-	got_sigterm = 0;
-    }
-    if (got_sigchld) {
-	reap_kids(0);	/* Don't leave dead kids lying around */
-	got_sigchld = 0;
-    }
-    if (got_sigusr2) {
-	open_ccp_flag = 1;
-	got_sigusr2 = 0;
-    }
-}
-
-/*
- * setup_signals - initialize signal handling.
- */
-static void
-setup_signals()
-{
-    struct sigaction sa;
-    sigset_t mask;
-
-    /*
-     * Compute mask of all interesting signals and install signal handlers
-     * for each.  Only one signal handler may be active at a time.  Therefore,
-     * all other signals should be masked when any handler is executing.
-     */
-    sigemptyset(&mask);
-    sigaddset(&mask, SIGHUP);
-    sigaddset(&mask, SIGINT);
-    sigaddset(&mask, SIGTERM);
-    sigaddset(&mask, SIGCHLD);
-    sigaddset(&mask, SIGUSR2);
-
-#define SIGNAL(s, handler)	do { \
-	sa.sa_handler = handler; \
-	if (sigaction(s, &sa, NULL) < 0) \
-	    fatal("Couldn't establish signal handler (%d): %m", s); \
-    } while (0)
-
-    sa.sa_mask = mask;
-    sa.sa_flags = 0;
-    SIGNAL(SIGHUP, hup);		/* Hangup */
-    SIGNAL(SIGINT, term);		/* Interrupt */
-    SIGNAL(SIGTERM, term);		/* Terminate */
-    SIGNAL(SIGCHLD, chld);
-
-    SIGNAL(SIGUSR1, toggle_debug);	/* Toggle debug flag */
-    SIGNAL(SIGUSR2, open_ccp);		/* Reopen CCP */
-
-    /*
-     * Install a handler for other signals which would otherwise
-     * cause pppd to exit without cleaning up.
-     */
-    SIGNAL(SIGABRT, bad_signal);
-    SIGNAL(SIGALRM, bad_signal);
-    SIGNAL(SIGFPE, bad_signal);
-    SIGNAL(SIGILL, bad_signal);
-    SIGNAL(SIGPIPE, bad_signal);
-    SIGNAL(SIGQUIT, bad_signal);
-    SIGNAL(SIGSEGV, bad_signal);
-#ifdef SIGBUS
-    SIGNAL(SIGBUS, bad_signal);
-#endif
-#ifdef SIGEMT
-    SIGNAL(SIGEMT, bad_signal);
-#endif
-#ifdef SIGPOLL
-    SIGNAL(SIGPOLL, bad_signal);
-#endif
-#ifdef SIGPROF
-    SIGNAL(SIGPROF, bad_signal);
-#endif
-#ifdef SIGSYS
-    SIGNAL(SIGSYS, bad_signal);
-#endif
-#ifdef SIGTRAP
-    SIGNAL(SIGTRAP, bad_signal);
-#endif
-#ifdef SIGVTALRM
-    SIGNAL(SIGVTALRM, bad_signal);
-#endif
-#ifdef SIGXCPU
-    SIGNAL(SIGXCPU, bad_signal);
-#endif
-#ifdef SIGXFSZ
-    SIGNAL(SIGXFSZ, bad_signal);
-#endif
-
-    /*
-     * Apparently we can get a SIGPIPE when we call syslog, if
-     * syslogd has died and been restarted.  Ignoring it seems
-     * be sufficient.
-     */
-    signal(SIGPIPE, SIG_IGN);
-}
-
-/*
- * set_ifunit - do things we need to do once we know which ppp
- * unit we are using.
- */
-void
-set_ifunit(iskey)
-    int iskey;
-{
-    info("Using interface %s%d", PPP_DRV_NAME, ifunit);
-    slprintf(ifname, sizeof(ifname), "%s%d", PPP_DRV_NAME, ifunit);
-    script_setenv("IFNAME", ifname, iskey);
-    if (iskey) {
-	create_pidfile();	/* write pid to file */
-	create_linkpidfile();
-    }
-}
-
-/*
- * detach - detach us from the controlling terminal.
- */
-void
-detach()
-{
-    int pid;
-    char numbuf[16];
-
-    if (detached)
-	return;
-    if ((pid = fork()) < 0) {
-	error("Couldn't detach (fork failed: %m)");
-	die(1);			/* or just return? */
-    }
-    if (pid != 0) {
-	/* parent */
-	notify(pidchange, pid);
-	exit(0);		/* parent dies */
-    }
-    setsid();
-    chdir("/");
-    close(0);
-    close(1);
-    close(2);
-    detached = 1;
-    if (log_default)
-	log_to_fd = -1;
-    /* update pid files if they have been written already */
-    if (pidfilename[0])
-	create_pidfile();
-    if (linkpidfile[0])
-	create_linkpidfile();
-    slprintf(numbuf, sizeof(numbuf), "%d", getpid());
-    script_setenv("PPPD_PID", numbuf, 1);
-}
-
-/*
- * reopen_log - (re)open our connection to syslog.
- */
-void
-reopen_log()
-{
-#ifdef ULTRIX
-    openlog("pppd", LOG_PID);
-#else
-    openlog("pppd", LOG_PID | LOG_NDELAY, LOG_PPP);
-    setlogmask(LOG_UPTO(LOG_INFO));
-#endif
-}
-
-/*
- * Create a file containing our process ID.
- */
-static void
-create_pidfile()
-{
-    FILE *pidfile;
-
-    slprintf(pidfilename, sizeof(pidfilename), "%s%s.pid",
-	     _PATH_VARRUN, ifname);
-    if ((pidfile = fopen(pidfilename, "w")) != NULL) {
-	fprintf(pidfile, "%d\n", getpid());
-	(void) fclose(pidfile);
-    } else {
-	error("Failed to create pid file %s: %m", pidfilename);
-	pidfilename[0] = 0;
-    }
-}
-
-static void
-create_linkpidfile()
-{
-    FILE *pidfile;
-
-    if (linkname[0] == 0)
-	return;
-    script_setenv("LINKNAME", linkname, 1);
-    slprintf(linkpidfile, sizeof(linkpidfile), "%sppp-%s.pid",
-	     _PATH_VARRUN, linkname);
-    if ((pidfile = fopen(linkpidfile, "w")) != NULL) {
-	fprintf(pidfile, "%d\n", getpid());
-	if (ifname[0])
-	    fprintf(pidfile, "%s\n", ifname);
-	(void) fclose(pidfile);
-    } else {
-	error("Failed to create pid file %s: %m", linkpidfile);
-	linkpidfile[0] = 0;
-    }
-}
-
-/*
- * holdoff_end - called via a timeout when the holdoff period ends.
- */
-static void
-holdoff_end(arg)
-    void *arg;
-{
-    new_phase(PHASE_DORMANT);
-}
-
-/* List of protocol names, to make our messages a little more informative. */
-struct protocol_list {
-    u_short	proto;
-    const char	*name;
-} protocol_list[] = {
-    { 0x21,	"IP" },
-    { 0x23,	"OSI Network Layer" },
-    { 0x25,	"Xerox NS IDP" },
-    { 0x27,	"DECnet Phase IV" },
-    { 0x29,	"Appletalk" },
-    { 0x2b,	"Novell IPX" },
-    { 0x2d,	"VJ compressed TCP/IP" },
-    { 0x2f,	"VJ uncompressed TCP/IP" },
-    { 0x31,	"Bridging PDU" },
-    { 0x33,	"Stream Protocol ST-II" },
-    { 0x35,	"Banyan Vines" },
-    { 0x39,	"AppleTalk EDDP" },
-    { 0x3b,	"AppleTalk SmartBuffered" },
-    { 0x3d,	"Multi-Link" },
-    { 0x3f,	"NETBIOS Framing" },
-    { 0x41,	"Cisco Systems" },
-    { 0x43,	"Ascom Timeplex" },
-    { 0x45,	"Fujitsu Link Backup and Load Balancing (LBLB)" },
-    { 0x47,	"DCA Remote Lan" },
-    { 0x49,	"Serial Data Transport Protocol (PPP-SDTP)" },
-    { 0x4b,	"SNA over 802.2" },
-    { 0x4d,	"SNA" },
-    { 0x4f,	"IP6 Header Compression" },
-    { 0x6f,	"Stampede Bridging" },
-    { 0xfb,	"single-link compression" },
-    { 0xfd,	"1st choice compression" },
-    { 0x0201,	"802.1d Hello Packets" },
-    { 0x0203,	"IBM Source Routing BPDU" },
-    { 0x0205,	"DEC LANBridge100 Spanning Tree" },
-    { 0x0231,	"Luxcom" },
-    { 0x0233,	"Sigma Network Systems" },
-    { 0x8021,	"Internet Protocol Control Protocol" },
-    { 0x8023,	"OSI Network Layer Control Protocol" },
-    { 0x8025,	"Xerox NS IDP Control Protocol" },
-    { 0x8027,	"DECnet Phase IV Control Protocol" },
-    { 0x8029,	"Appletalk Control Protocol" },
-    { 0x802b,	"Novell IPX Control Protocol" },
-    { 0x8031,	"Bridging NCP" },
-    { 0x8033,	"Stream Protocol Control Protocol" },
-    { 0x8035,	"Banyan Vines Control Protocol" },
-    { 0x803d,	"Multi-Link Control Protocol" },
-    { 0x803f,	"NETBIOS Framing Control Protocol" },
-    { 0x8041,	"Cisco Systems Control Protocol" },
-    { 0x8043,	"Ascom Timeplex" },
-    { 0x8045,	"Fujitsu LBLB Control Protocol" },
-    { 0x8047,	"DCA Remote Lan Network Control Protocol (RLNCP)" },
-    { 0x8049,	"Serial Data Control Protocol (PPP-SDCP)" },
-    { 0x804b,	"SNA over 802.2 Control Protocol" },
-    { 0x804d,	"SNA Control Protocol" },
-    { 0x804f,	"IP6 Header Compression Control Protocol" },
-    { 0x006f,	"Stampede Bridging Control Protocol" },
-    { 0x80fb,	"Single Link Compression Control Protocol" },
-    { 0x80fd,	"Compression Control Protocol" },
-    { 0xc021,	"Link Control Protocol" },
-    { 0xc023,	"Password Authentication Protocol" },
-    { 0xc025,	"Link Quality Report" },
-    { 0xc027,	"Shiva Password Authentication Protocol" },
-    { 0xc029,	"CallBack Control Protocol (CBCP)" },
-    { 0xc081,	"Container Control Protocol" },
-    { 0xc223,	"Challenge Handshake Authentication Protocol" },
-    { 0xc281,	"Proprietary Authentication Protocol" },
-    { 0,	NULL },
-};
-
-/*
- * protocol_name - find a name for a PPP protocol.
- */
-const char *
-protocol_name(proto)
-    int proto;
-{
-    struct protocol_list *lp;
-
-    for (lp = protocol_list; lp->proto != 0; ++lp)
-	if (proto == lp->proto)
-	    return lp->name;
-    return NULL;
-}
-
-/*
- * get_input - called when incoming data is available.
- */
-static void
-get_input()
-{
-    int len, i;
-    u_char *p;
-    u_short protocol;
-    struct protent *protp;
-
-    p = inpacket_buf;	/* point to beginning of packet buffer */
-
-    len = read_packet(inpacket_buf);
-    if (len < 0)
-	return;
-
-    if (len == 0) {
-	notice("Modem hangup");
-	hungup = 1;
-	status = EXIT_HANGUP;
-	lcp_lowerdown(0);	/* serial link is no longer available */
-	link_terminated(0);
-	return;
-    }
-
-    if (debug /*&& (debugflags & DBG_INPACKET)*/)
-	dbglog("rcvd %P", p, len);
-
-    if (len < PPP_HDRLEN) {
-	MAINDEBUG(("io(): Received short packet."));
-	return;
-    }
-
-    p += 2;				/* Skip address and control */
-    GETSHORT(protocol, p);
-    len -= PPP_HDRLEN;
-
-    /*
-     * Toss all non-LCP packets unless LCP is OPEN.
-     */
-    if (protocol != PPP_LCP && lcp_fsm[0].state != OPENED) {
-	MAINDEBUG(("get_input: Received non-LCP packet when LCP not open."));
-	return;
-    }
-
-    /*
-     * Until we get past the authentication phase, toss all packets
-     * except LCP, LQR and authentication packets.
-     */
-    if (phase <= PHASE_AUTHENTICATE
-	&& !(protocol == PPP_LCP || protocol == PPP_LQR
-	     || protocol == PPP_PAP || protocol == PPP_CHAP)) {
-	MAINDEBUG(("get_input: discarding proto 0x%x in phase %d",
-		   protocol, phase));
-	return;
-    }
-
-    /*
-     * Upcall the proper protocol input routine.
-     */
-    for (i = 0; (protp = protocols[i]) != NULL; ++i) {
-	if (protp->protocol == protocol && protp->enabled_flag) {
-	    (*protp->input)(0, p, len);
-	    return;
-	}
-        if (protocol == (protp->protocol & ~0x8000) && protp->enabled_flag
-	    && protp->datainput != NULL) {
-	    (*protp->datainput)(0, p, len);
-	    return;
-	}
-    }
-
-    if (debug) {
-	const char *pname = protocol_name(protocol);
-	if (pname != NULL)
-	    warn("Unsupported protocol '%s' (0x%x) received", pname, protocol);
-	else
-	    warn("Unsupported protocol 0x%x received", protocol);
-    }
-    lcp_sprotrej(0, p - PPP_HDRLEN, len + PPP_HDRLEN);
-}
-
-/*
- * new_phase - signal the start of a new phase of pppd's operation.
- */
-void
-new_phase(p)
-    int p;
-{
-    phase = p;
-    if (new_phase_hook)
-	(*new_phase_hook)(p);
-    notify(phasechange, p);
-}
-
-/*
- * die - clean up state and exit with the specified status.
- */
-void
-die(status)
-    int status;
-{
-    cleanup();
-    notify(exitnotify, status);
-    syslog(LOG_INFO, "Exit.");
-    exit(status);
-}
-
-/*
- * cleanup - restore anything which needs to be restored before we exit
- */
-/* ARGSUSED */
-static void
-cleanup()
-{
-    sys_cleanup();
-
-    if (fd_ppp >= 0)
-	the_channel->disestablish_ppp(devfd);
-    if (the_channel->cleanup)
-	(*the_channel->cleanup)();
-
-    if (pidfilename[0] != 0 && unlink(pidfilename) < 0 && errno != ENOENT) 
-	warn("unable to delete pid file %s: %m", pidfilename);
-    pidfilename[0] = 0;
-    if (linkpidfile[0] != 0 && unlink(linkpidfile) < 0 && errno != ENOENT) 
-	warn("unable to delete pid file %s: %m", linkpidfile);
-    linkpidfile[0] = 0;
-
-    if (pppdb != NULL)
-	cleanup_db();
-}
-
-/*
- * update_link_stats - get stats at link termination.
- */
-void
-update_link_stats(u)
-    int u;
-{
-    struct timeval now;
-    char numbuf[32];
-
-    if (!get_ppp_stats(u, &link_stats)
-	|| gettimeofday(&now, NULL) < 0)
-	return;
-    link_connect_time = now.tv_sec - start_time.tv_sec;
-    link_stats_valid = 1;
-
-    slprintf(numbuf, sizeof(numbuf), "%d", link_connect_time);
-    script_setenv("CONNECT_TIME", numbuf, 0);
-    slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_out);
-    script_setenv("BYTES_SENT", numbuf, 0);
-    slprintf(numbuf, sizeof(numbuf), "%d", link_stats.bytes_in);
-    script_setenv("BYTES_RCVD", numbuf, 0);
-}
-
-
-struct	callout {
-    struct timeval	c_time;		/* time at which to call routine */
-    void		*c_arg;		/* argument to routine */
-    void		(*c_func) __P((void *)); /* routine */
-    struct		callout *c_next;
-};
-
-static struct callout *callout = NULL;	/* Callout list */
-static struct timeval timenow;		/* Current time */
-
-/*
- * timeout - Schedule a timeout.
- *
- * Note that this timeout takes the number of milliseconds, NOT hz (as in
- * the kernel).
- */
-void
-timeout(func, arg, secs, usecs)
-    void (*func) __P((void *));
-    void *arg;
-    int secs, usecs;
-{
-    struct callout *newp, *p, **pp;
-  
-    MAINDEBUG(("Timeout %p:%p in %d.%03d seconds.", func, arg,
-	       time / 1000, time % 1000));
-  
-    /*
-     * Allocate timeout.
-     */
-    if ((newp = (struct callout *) malloc(sizeof(struct callout))) == NULL)
-	fatal("Out of memory in timeout()!");
-    newp->c_arg = arg;
-    newp->c_func = func;
-    gettimeofday(&timenow, NULL);
-    newp->c_time.tv_sec = timenow.tv_sec + secs;
-    newp->c_time.tv_usec = timenow.tv_usec + usecs;
-    if (newp->c_time.tv_usec >= 1000000) {
-	newp->c_time.tv_sec += newp->c_time.tv_usec / 1000000;
-	newp->c_time.tv_usec %= 1000000;
-    }
-
-    /*
-     * Find correct place and link it in.
-     */
-    for (pp = &callout; (p = *pp); pp = &p->c_next)
-	if (newp->c_time.tv_sec < p->c_time.tv_sec
-	    || (newp->c_time.tv_sec == p->c_time.tv_sec
-		&& newp->c_time.tv_usec < p->c_time.tv_usec))
-	    break;
-    newp->c_next = p;
-    *pp = newp;
-}
-
-
-/*
- * untimeout - Unschedule a timeout.
- */
-void
-untimeout(func, arg)
-    void (*func) __P((void *));
-    void *arg;
-{
-    struct callout **copp, *freep;
-  
-    MAINDEBUG(("Untimeout %p:%p.", func, arg));
-  
-    /*
-     * Find first matching timeout and remove it from the list.
-     */
-    for (copp = &callout; (freep = *copp); copp = &freep->c_next)
-	if (freep->c_func == func && freep->c_arg == arg) {
-	    *copp = freep->c_next;
-	    free((char *) freep);
-	    break;
-	}
-}
-
-
-/*
- * calltimeout - Call any timeout routines which are now due.
- */
-static void
-calltimeout()
-{
-    struct callout *p;
-
-    while (callout != NULL) {
-	p = callout;
-
-	if (gettimeofday(&timenow, NULL) < 0)
-	    fatal("Failed to get time of day: %m");
-	if (!(p->c_time.tv_sec < timenow.tv_sec
-	      || (p->c_time.tv_sec == timenow.tv_sec
-		  && p->c_time.tv_usec <= timenow.tv_usec)))
-	    break;		/* no, it's not time yet */
-
-	callout = p->c_next;
-	(*p->c_func)(p->c_arg);
-
-	free((char *) p);
-    }
-}
-
-
-/*
- * timeleft - return the length of time until the next timeout is due.
- */
-static struct timeval *
-timeleft(tvp)
-    struct timeval *tvp;
-{
-    if (callout == NULL)
-	return NULL;
-
-    gettimeofday(&timenow, NULL);
-    tvp->tv_sec = callout->c_time.tv_sec - timenow.tv_sec;
-    tvp->tv_usec = callout->c_time.tv_usec - timenow.tv_usec;
-    if (tvp->tv_usec < 0) {
-	tvp->tv_usec += 1000000;
-	tvp->tv_sec -= 1;
-    }
-    if (tvp->tv_sec < 0)
-	tvp->tv_sec = tvp->tv_usec = 0;
-
-    return tvp;
-}
-
-
-/*
- * kill_my_pg - send a signal to our process group, and ignore it ourselves.
- */
-static void
-kill_my_pg(sig)
-    int sig;
-{
-    struct sigaction act, oldact;
-
-    act.sa_handler = SIG_IGN;
-    act.sa_flags = 0;
-    kill(0, sig);
-    sigaction(sig, &act, &oldact);
-    sigaction(sig, &oldact, NULL);
-}
-
-
-/*
- * hup - Catch SIGHUP signal.
- *
- * Indicates that the physical layer has been disconnected.
- * We don't rely on this indication; if the user has sent this
- * signal, we just take the link down.
- */
-static void
-hup(sig)
-    int sig;
-{
-    info("Hangup (SIGHUP)");
-    got_sighup = 1;
-    if (conn_running)
-	/* Send the signal to the [dis]connector process(es) also */
-	kill_my_pg(sig);
-    notify(sigreceived, sig);
-    if (waiting)
-	siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * term - Catch SIGTERM signal and SIGINT signal (^C/del).
- *
- * Indicates that we should initiate a graceful disconnect and exit.
- */
-/*ARGSUSED*/
-static void
-term(sig)
-    int sig;
-{
-    info("Terminating on signal %d.", sig);
-    got_sigterm = 1;
-    if (conn_running)
-	/* Send the signal to the [dis]connector process(es) also */
-	kill_my_pg(sig);
-    notify(sigreceived, sig);
-    if (waiting)
-	siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * chld - Catch SIGCHLD signal.
- * Sets a flag so we will call reap_kids in the mainline.
- */
-static void
-chld(sig)
-    int sig;
-{
-    got_sigchld = 1;
-    if (waiting)
-	siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * toggle_debug - Catch SIGUSR1 signal.
- *
- * Toggle debug flag.
- */
-/*ARGSUSED*/
-static void
-toggle_debug(sig)
-    int sig;
-{
-    debug = !debug;
-    if (debug) {
-	setlogmask(LOG_UPTO(LOG_DEBUG));
-    } else {
-	setlogmask(LOG_UPTO(LOG_WARNING));
-    }
-}
-
-
-/*
- * open_ccp - Catch SIGUSR2 signal.
- *
- * Try to (re)negotiate compression.
- */
-/*ARGSUSED*/
-static void
-open_ccp(sig)
-    int sig;
-{
-    got_sigusr2 = 1;
-    if (waiting)
-	siglongjmp(sigjmp, 1);
-}
-
-
-/*
- * bad_signal - We've caught a fatal signal.  Clean up state and exit.
- */
-static void
-bad_signal(sig)
-    int sig;
-{
-    static int crashed = 0;
-
-    if (crashed)
-	_exit(127);
-    crashed = 1;
-    error("Fatal signal %d", sig);
-    if (conn_running)
-	kill_my_pg(SIGTERM);
-    notify(sigreceived, sig);
-    die(127);
-}
-
-
-/*
- * device_script - run a program to talk to the specified fds
- * (e.g. to run the connector or disconnector script).
- * stderr gets connected to the log fd or to the _PATH_CONNERRS file.
- */
-int
-device_script(program, in, out, dont_wait)
-    char *program;
-    int in, out;
-    int dont_wait;
-{
-    int pid, fd;
-    int status = -1;
-    int errfd;
-
-    ++conn_running;
-    pid = fork();
-
-    if (pid < 0) {
-	--conn_running;
-	error("Failed to create child process: %m");
-	return -1;
-    }
-
-    if (pid != 0) {
-	if (dont_wait) {
-	    record_child(pid, program, NULL, NULL);
-	    status = 0;
-	} else {
-	    while (waitpid(pid, &status, 0) < 0) {
-		if (errno == EINTR)
-		    continue;
-		fatal("error waiting for (dis)connection process: %m");
-	    }
-	    --conn_running;
-	}
-	return (status == 0 ? 0 : -1);
-    }
-
-    /* here we are executing in the child */
-    /* make sure fds 0, 1, 2 are occupied */
-    while ((fd = dup(in)) >= 0) {
-	if (fd > 2) {
-	    close(fd);
-	    break;
-	}
-    }
-
-    /* dup in and out to fds > 2 */
-    in = dup(in);
-    out = dup(out);
-    if (log_to_fd >= 0) {
-	errfd = dup(log_to_fd);
-    } else {
-	errfd = open(_PATH_CONNERRS, O_WRONLY | O_APPEND | O_CREAT, 0600);
-    }
-
-    /* close fds 0 - 2 and any others we can think of */
-    close(0);
-    close(1);
-    close(2);
-    sys_close();
-    if (the_channel->close)
-	(*the_channel->close)();
-    closelog();
-
-    /* dup the in, out, err fds to 0, 1, 2 */
-    dup2(in, 0);
-    close(in);
-    dup2(out, 1);
-    close(out);
-    if (errfd >= 0) {
-	dup2(errfd, 2);
-	close(errfd);
-    }
-
-    setuid(uid);
-    if (getuid() != uid) {
-	error("setuid failed");
-	exit(1);
-    }
-    setgid(getgid());
-    {
-	    int argc = 0;
-	    char * argv[500];
-	    char * ptr = program;
-	    while (ptr != NULL) {
-		    argv[argc] = ptr;
-		    argc++;
-		    ptr = strchr(ptr, ' ');
-		    if (ptr) {
-			    ptr[0] = '\0';
-			    ptr++;
-		    }
-	    }
-	    argv[argc] = NULL;
-	    execv(argv[0], argv);
-	    error("could not exec %s: %m", program);
-	    exit(99);
-    }
-    /* NOTREACHED */
-}
-
-
-/*
- * run-program - execute a program with given arguments,
- * but don't wait for it.
- * If the program can't be executed, logs an error unless
- * must_exist is 0 and the program file doesn't exist.
- * Returns -1 if it couldn't fork, 0 if the file doesn't exist
- * or isn't an executable plain file, or the process ID of the child.
- * If done != NULL, (*done)(arg) will be called later (within
- * reap_kids) iff the return value is > 0.
- */
-pid_t
-run_program(prog, args, must_exist, done, arg)
-    char *prog;
-    char **args;
-    int must_exist;
-    void (*done) __P((void *));
-    void *arg;
-{
-    int pid;
-    struct stat sbuf;
-
-    /*
-     * First check if the file exists and is executable.
-     * We don't use access() because that would use the
-     * real user-id, which might not be root, and the script
-     * might be accessible only to root.
-     */
-    errno = EINVAL;
-    if (stat(prog, &sbuf) < 0 || !S_ISREG(sbuf.st_mode)
-	|| (sbuf.st_mode & (S_IXUSR|S_IXGRP|S_IXOTH)) == 0) {
-	if (must_exist || errno != ENOENT)
-	    warn("Can't execute %s: %m", prog);
-	return 0;
-    }
-
-    pid = fork();
-    if (pid == -1) {
-	error("Failed to create child process for %s: %m", prog);
-	return -1;
-    }
-    if (pid == 0) {
-	int new_fd;
-
-	/* Leave the current location */
-	(void) setsid();	/* No controlling tty. */
-	(void) umask (S_IRWXG|S_IRWXO);
-	(void) chdir ("/");	/* no current directory. */
-	setuid(0);		/* set real UID = root */
-	setgid(getegid());
-
-	/* Ensure that nothing of our device environment is inherited. */
-	sys_close();
-	closelog();
-	close (0);
-	close (1);
-	close (2);
-	if (the_channel->close)
-	    (*the_channel->close)();
-
-        /* Don't pass handles to the PPP device, even by accident. */
-	new_fd = open (_PATH_DEVNULL, O_RDWR);
-	if (new_fd >= 0) {
-	    if (new_fd != 0) {
-	        dup2  (new_fd, 0); /* stdin <- /dev/null */
-		close (new_fd);
-	    }
-	    dup2 (0, 1); /* stdout -> /dev/null */
-	    dup2 (0, 2); /* stderr -> /dev/null */
-	}
-
-#ifdef BSD
-	/* Force the priority back to zero if pppd is running higher. */
-	if (setpriority (PRIO_PROCESS, 0, 0) < 0)
-	    warn("can't reset priority to 0: %m"); 
-#endif
-
-	/* SysV recommends a second fork at this point. */
-
-	/* run the program */
-	execve(prog, args, script_env);
-	if (must_exist || errno != ENOENT) {
-	    /* have to reopen the log, there's nowhere else
-	       for the message to go. */
-	    reopen_log();
-	    syslog(LOG_ERR, "Can't execute %s: %m", prog);
-	    closelog();
-	}
-	_exit(-1);
-    }
-
-    if (debug)
-	dbglog("Script %s started (pid %d)", prog, pid);
-    record_child(pid, prog, done, arg);
-
-    return pid;
-}
-
-
-/*
- * record_child - add a child process to the list for reap_kids
- * to use.
- */
-void
-record_child(pid, prog, done, arg)
-    int pid;
-    char *prog;
-    void (*done) __P((void *));
-    void *arg;
-{
-    struct subprocess *chp;
-
-    ++n_children;
-
-    chp = (struct subprocess *) malloc(sizeof(struct subprocess));
-    if (chp == NULL) {
-	warn("losing track of %s process", prog);
-    } else {
-	chp->pid = pid;
-	chp->prog = prog;
-	chp->done = done;
-	chp->arg = arg;
-	chp->next = children;
-	children = chp;
-    }
-}
-
-
-/*
- * reap_kids - get status from any dead child processes,
- * and log a message for abnormal terminations.
- */
-static int
-reap_kids(waitfor)
-    int waitfor;
-{
-    int pid, status;
-    struct subprocess *chp, **prevp;
-
-    if (n_children == 0)
-	return 0;
-    while ((pid = waitpid(-1, &status, (waitfor? 0: WNOHANG))) != -1
-	   && pid != 0) {
-	for (prevp = &children; (chp = *prevp) != NULL; prevp = &chp->next) {
-	    if (chp->pid == pid) {
-		--n_children;
-		*prevp = chp->next;
-		break;
-	    }
-	}
-	if (WIFSIGNALED(status)) {
-	    warn("Child process %s (pid %d) terminated with signal %d",
-		 (chp? chp->prog: "??"), pid, WTERMSIG(status));
-	} else if (debug)
-	    dbglog("Script %s finished (pid %d), status = 0x%x",
-		   (chp? chp->prog: "??"), pid, status);
-	if (chp && chp->done)
-	    (*chp->done)(chp->arg);
-	if (chp)
-	    free(chp);
-    }
-    if (pid == -1) {
-	if (errno == ECHILD)
-	    return -1;
-	if (errno != EINTR)
-	    error("Error waiting for child process: %m");
-    }
-    return 0;
-}
-
-/*
- * add_notifier - add a new function to be called when something happens.
- */
-void
-add_notifier(notif, func, arg)
-    struct notifier **notif;
-    notify_func func;
-    void *arg;
-{
-    struct notifier *np;
-
-    np = malloc(sizeof(struct notifier));
-    if (np == 0)
-	novm("notifier struct");
-    np->next = *notif;
-    np->func = func;
-    np->arg = arg;
-    *notif = np;
-}
-
-/*
- * remove_notifier - remove a function from the list of things to
- * be called when something happens.
- */
-void
-remove_notifier(notif, func, arg)
-    struct notifier **notif;
-    notify_func func;
-    void *arg;
-{
-    struct notifier *np;
-
-    for (; (np = *notif) != 0; notif = &np->next) {
-	if (np->func == func && np->arg == arg) {
-	    *notif = np->next;
-	    free(np);
-	    break;
-	}
-    }
-}
-
-/*
- * notify - call a set of functions registered with add_notify.
- */
-void
-notify(notif, val)
-    struct notifier *notif;
-    int val;
-{
-    struct notifier *np;
-
-    while ((np = notif) != 0) {
-	notif = np->next;
-	(*np->func)(np->arg, val);
-    }
-}
-
-/*
- * novm - log an error message saying we ran out of memory, and die.
- */
-void
-novm(msg)
-    char *msg;
-{
-    fatal("Virtual memory exhausted allocating %s\n", msg);
-}
-
-/*
- * script_setenv - set an environment variable value to be used
- * for scripts that we run (e.g. ip-up, auth-up, etc.)
- */
-void
-script_setenv(var, value, iskey)
-    char *var, *value;
-    int iskey;
-{
-    size_t varl = strlen(var);
-    size_t vl = varl + strlen(value) + 2;
-    int i;
-    char *p, *newstring;
-
-    newstring = (char *) malloc(vl+1);
-    if (newstring == 0)
-	return;
-    *newstring++ = iskey;
-    slprintf(newstring, vl, "%s=%s", var, value);
-
-    /* check if this variable is already set */
-    if (script_env != 0) {
-	for (i = 0; (p = script_env[i]) != 0; ++i) {
-	    if (strncmp(p, var, varl) == 0 && p[varl] == '=') {
-		if (p[-1] && pppdb != NULL)
-		    delete_db_key(p);
-		free(p-1);
-		script_env[i] = newstring;
-		if (iskey && pppdb != NULL)
-		    add_db_key(newstring);
-		update_db_entry();
-		return;
-	    }
-	}
-    } else {
-	/* no space allocated for script env. ptrs. yet */
-	i = 0;
-	script_env = (char **) malloc(16 * sizeof(char *));
-	if (script_env == 0)
-	    return;
-	s_env_nalloc = 16;
-    }
-
-    /* reallocate script_env with more space if needed */
-    if (i + 1 >= s_env_nalloc) {
-	int new_n = i + 17;
-	char **newenv = (char **) realloc((void *)script_env,
-					  new_n * sizeof(char *));
-	if (newenv == 0)
-	    return;
-	script_env = newenv;
-	s_env_nalloc = new_n;
-    }
-
-    script_env[i] = newstring;
-    script_env[i+1] = 0;
-
-    if (pppdb != NULL) {
-	if (iskey)
-	    add_db_key(newstring);
-	update_db_entry();
-    }
-}
-
-/*
- * script_unsetenv - remove a variable from the environment
- * for scripts.
- */
-void
-script_unsetenv(var)
-    char *var;
-{
-    int vl = strlen(var);
-    int i;
-    char *p;
-
-    if (script_env == 0)
-	return;
-    for (i = 0; (p = script_env[i]) != 0; ++i) {
-	if (strncmp(p, var, vl) == 0 && p[vl] == '=') {
-	    if (p[-1] && pppdb != NULL)
-		delete_db_key(p);
-	    free(p-1);
-	    while ((script_env[i] = script_env[i+1]) != 0)
-		++i;
-	    break;
-	}
-    }
-    if (pppdb != NULL)
-	update_db_entry();
-}
-
-/*
- * update_db_entry - update our entry in the database.
- */
-static void
-update_db_entry()
-{
-    TDB_DATA key, dbuf;
-    int vlen, i;
-    char *p, *q, *vbuf;
-
-    if (script_env == NULL)
-	return;
-    vlen = 0;
-    for (i = 0; (p = script_env[i]) != 0; ++i)
-	vlen += strlen(p) + 1;
-    vbuf = malloc(vlen);
-    if (vbuf == 0)
-	novm("database entry");
-    q = vbuf;
-    for (i = 0; (p = script_env[i]) != 0; ++i)
-	q += slprintf(q, vbuf + vlen - q, "%s;", p);
-
-    key.dptr = db_key;
-    key.dsize = strlen(db_key);
-    dbuf.dptr = vbuf;
-    dbuf.dsize = vlen;
-    if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
-	error("tdb_store failed: %s", tdb_error(pppdb));
-
-}
-
-/*
- * add_db_key - add a key that we can use to look up our database entry.
- */
-static void
-add_db_key(str)
-    const char *str;
-{
-    TDB_DATA key, dbuf;
-
-    key.dptr = (char *) str;
-    key.dsize = strlen(str);
-    dbuf.dptr = db_key;
-    dbuf.dsize = strlen(db_key);
-    if (tdb_store(pppdb, key, dbuf, TDB_REPLACE))
-	error("tdb_store key failed: %s", tdb_error(pppdb));
-}
-
-/*
- * delete_db_key - delete a key for looking up our database entry.
- */
-static void
-delete_db_key(str)
-    const char *str;
-{
-    TDB_DATA key;
-
-    key.dptr = (char *) str;
-    key.dsize = strlen(str);
-    tdb_delete(pppdb, key);
-}
-
-/*
- * cleanup_db - delete all the entries we put in the database.
- */
-static void
-cleanup_db()
-{
-    TDB_DATA key;
-    int i;
-    char *p;
-
-    key.dptr = db_key;
-    key.dsize = strlen(db_key);
-    tdb_delete(pppdb, key);
-    for (i = 0; (p = script_env[i]) != 0; ++i)
-	if (p[-1])
-	    delete_db_key(p);
-}
diff --git a/mdk-stage1/ppp/pppd/md4.c b/mdk-stage1/ppp/pppd/md4.c
deleted file mode 100644
index cda9f943d..000000000
--- a/mdk-stage1/ppp/pppd/md4.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
-** ********************************************************************
-** md4.c -- Implementation of MD4 Message Digest Algorithm           **
-** Updated: 2/16/90 by Ronald L. Rivest                              **
-** (C) 1990 RSA Data Security, Inc.                                  **
-** ********************************************************************
-*/
-
-/*
-** To use MD4:
-**   -- Include md4.h in your program
-**   -- Declare an MDstruct MD to hold the state of the digest
-**          computation.
-**   -- Initialize MD using MDbegin(&MD)
-**   -- For each full block (64 bytes) X you wish to process, call
-**          MD4Update(&MD,X,512)
-**      (512 is the number of bits in a full block.)
-**   -- For the last block (less than 64 bytes) you wish to process,
-**          MD4Update(&MD,X,n)
-**      where n is the number of bits in the partial block. A partial
-**      block terminates the computation, so every MD computation
-**      should terminate by processing a partial block, even if it
-**      has n = 0.
-**   -- The message digest is available in MD.buffer[0] ...
-**      MD.buffer[3].  (Least-significant byte of each word
-**      should be output first.)
-**   -- You can print out the digest using MDprint(&MD)
-*/
-
-/* Implementation notes:
-** This implementation assumes that ints are 32-bit quantities.
-*/
-
-#define TRUE  1
-#define FALSE 0
-
-/* Compile-time includes
-*/
-#include <stdio.h>
-#include "md4.h"
-#include "pppd.h"
-
-/* Compile-time declarations of MD4 "magic constants".
-*/
-#define I0  0x67452301       /* Initial values for MD buffer */
-#define I1  0xefcdab89
-#define I2  0x98badcfe
-#define I3  0x10325476
-#define C2  013240474631     /* round 2 constant = sqrt(2) in octal */
-#define C3  015666365641     /* round 3 constant = sqrt(3) in octal */
-/* C2 and C3 are from Knuth, The Art of Programming, Volume 2
-** (Seminumerical Algorithms), Second Edition (1981), Addison-Wesley.
-** Table 2, page 660.
-*/
-
-#define fs1  3               /* round 1 shift amounts */
-#define fs2  7
-#define fs3 11
-#define fs4 19
-#define gs1  3               /* round 2 shift amounts */
-#define gs2  5
-#define gs3  9
-#define gs4 13
-#define hs1  3               /* round 3 shift amounts */
-#define hs2  9
-#define hs3 11
-#define hs4 15
-
-/* Compile-time macro declarations for MD4.
-** Note: The "rot" operator uses the variable "tmp".
-** It assumes tmp is declared as unsigned int, so that the >>
-** operator will shift in zeros rather than extending the sign bit.
-*/
-#define f(X,Y,Z)             ((X&Y) | ((~X)&Z))
-#define g(X,Y,Z)             ((X&Y) | (X&Z) | (Y&Z))
-#define h(X,Y,Z)             (X^Y^Z)
-#define rot(X,S)             (tmp=X,(tmp<<S) | (tmp>>(32-S)))
-#define ff(A,B,C,D,i,s)      A = rot((A + f(B,C,D) + X[i]),s)
-#define gg(A,B,C,D,i,s)      A = rot((A + g(B,C,D) + X[i] + C2),s)
-#define hh(A,B,C,D,i,s)      A = rot((A + h(B,C,D) + X[i] + C3),s)
-
-/* MD4print(MDp)
-** Print message digest buffer MDp as 32 hexadecimal digits.
-** Order is from low-order byte of buffer[0] to high-order byte of
-** buffer[3].
-** Each byte is printed with high-order hexadecimal digit first.
-** This is a user-callable routine.
-*/
-void
-MD4Print(MDp)
-MD4_CTX *MDp;
-{
-  int i,j;
-  for (i=0;i<4;i++)
-    for (j=0;j<32;j=j+8)
-      printf("%02x",(MDp->buffer[i]>>j) & 0xFF);
-}
-
-/* MD4Init(MDp)
-** Initialize message digest buffer MDp.
-** This is a user-callable routine.
-*/
-void
-MD4Init(MDp)
-MD4_CTX *MDp;
-{
-  int i;
-  MDp->buffer[0] = I0;
-  MDp->buffer[1] = I1;
-  MDp->buffer[2] = I2;
-  MDp->buffer[3] = I3;
-  for (i=0;i<8;i++) MDp->count[i] = 0;
-  MDp->done = 0;
-}
-
-/* MDblock(MDp,X)
-** Update message digest buffer MDp->buffer using 16-word data block X.
-** Assumes all 16 words of X are full of data.
-** Does not update MDp->count.
-** This routine is not user-callable.
-*/
-static void
-MDblock(MDp,Xb)
-MD4_CTX *MDp;
-unsigned char *Xb;
-{
-  register unsigned int tmp, A, B, C, D;
-  unsigned int X[16];
-  int i;
-
-  for (i = 0; i < 16; ++i) {
-    X[i] = Xb[0] + (Xb[1] << 8) + (Xb[2] << 16) + (Xb[3] << 24);
-    Xb += 4;
-  }
-
-  A = MDp->buffer[0];
-  B = MDp->buffer[1];
-  C = MDp->buffer[2];
-  D = MDp->buffer[3];
-  /* Update the message digest buffer */
-  ff(A , B , C , D ,  0 , fs1); /* Round 1 */
-  ff(D , A , B , C ,  1 , fs2);
-  ff(C , D , A , B ,  2 , fs3);
-  ff(B , C , D , A ,  3 , fs4);
-  ff(A , B , C , D ,  4 , fs1);
-  ff(D , A , B , C ,  5 , fs2);
-  ff(C , D , A , B ,  6 , fs3);
-  ff(B , C , D , A ,  7 , fs4);
-  ff(A , B , C , D ,  8 , fs1);
-  ff(D , A , B , C ,  9 , fs2);
-  ff(C , D , A , B , 10 , fs3);
-  ff(B , C , D , A , 11 , fs4);
-  ff(A , B , C , D , 12 , fs1);
-  ff(D , A , B , C , 13 , fs2);
-  ff(C , D , A , B , 14 , fs3);
-  ff(B , C , D , A , 15 , fs4);
-  gg(A , B , C , D ,  0 , gs1); /* Round 2 */
-  gg(D , A , B , C ,  4 , gs2);
-  gg(C , D , A , B ,  8 , gs3);
-  gg(B , C , D , A , 12 , gs4);
-  gg(A , B , C , D ,  1 , gs1);
-  gg(D , A , B , C ,  5 , gs2);
-  gg(C , D , A , B ,  9 , gs3);
-  gg(B , C , D , A , 13 , gs4);
-  gg(A , B , C , D ,  2 , gs1);
-  gg(D , A , B , C ,  6 , gs2);
-  gg(C , D , A , B , 10 , gs3);
-  gg(B , C , D , A , 14 , gs4);
-  gg(A , B , C , D ,  3 , gs1);
-  gg(D , A , B , C ,  7 , gs2);
-  gg(C , D , A , B , 11 , gs3);
-  gg(B , C , D , A , 15 , gs4);
-  hh(A , B , C , D ,  0 , hs1); /* Round 3 */
-  hh(D , A , B , C ,  8 , hs2);
-  hh(C , D , A , B ,  4 , hs3);
-  hh(B , C , D , A , 12 , hs4);
-  hh(A , B , C , D ,  2 , hs1);
-  hh(D , A , B , C , 10 , hs2);
-  hh(C , D , A , B ,  6 , hs3);
-  hh(B , C , D , A , 14 , hs4);
-  hh(A , B , C , D ,  1 , hs1);
-  hh(D , A , B , C ,  9 , hs2);
-  hh(C , D , A , B ,  5 , hs3);
-  hh(B , C , D , A , 13 , hs4);
-  hh(A , B , C , D ,  3 , hs1);
-  hh(D , A , B , C , 11 , hs2);
-  hh(C , D , A , B ,  7 , hs3);
-  hh(B , C , D , A , 15 , hs4);
-  MDp->buffer[0] += A;
-  MDp->buffer[1] += B;
-  MDp->buffer[2] += C;
-  MDp->buffer[3] += D;
-}
-
-/* MD4Update(MDp,X,count)
-** Input: X -- a pointer to an array of unsigned characters.
-**        count -- the number of bits of X to use.
-**          (if not a multiple of 8, uses high bits of last byte.)
-** Update MDp using the number of bits of X given by count.
-** This is the basic input routine for an MD4 user.
-** The routine completes the MD computation when count < 512, so
-** every MD computation should end with one call to MD4Update with a
-** count less than 512.  A call with count 0 will be ignored if the
-** MD has already been terminated (done != 0), so an extra call with
-** count 0 can be given as a "courtesy close" to force termination
-** if desired.
-*/
-void
-MD4Update(MDp,X,count)
-MD4_CTX *MDp;
-unsigned char *X;
-unsigned int count;
-{
-  unsigned int i, tmp, bit, byte, mask;
-  unsigned char XX[64];
-  unsigned char *p;
-
-  /* return with no error if this is a courtesy close with count
-  ** zero and MDp->done is true.
-  */
-  if (count == 0 && MDp->done) return;
-  /* check to see if MD is already done and report error */
-  if (MDp->done)
-  { printf("\nError: MD4Update MD already done."); return; }
-
-  /* Add count to MDp->count */
-  tmp = count;
-  p = MDp->count;
-  while (tmp)
-  { tmp += *p;
-  *p++ = tmp;
-  tmp = tmp >> 8;
-  }
-
-  /* Process data */
-  if (count == 512)
-  { /* Full block of data to handle */
-    MDblock(MDp,X);
-  }
-  else if (count > 512) /* Check for count too large */
-  {
-    printf("\nError: MD4Update called with illegal count value %d.",
-	   count);
-    return;
-  }
-  else /* partial block -- must be last block so finish up */
-  {
-    /* Find out how many bytes and residual bits there are */
-    byte = count >> 3;
-    bit =  count & 7;
-    /* Copy X into XX since we need to modify it */
-    for (i=0;i<=byte;i++)   XX[i] = X[i];
-    for (i=byte+1;i<64;i++) XX[i] = 0;
-    /* Add padding '1' bit and low-order zeros in last byte */
-    mask = 1 << (7 - bit);
-    XX[byte] = (XX[byte] | mask) & ~( mask - 1);
-    /* If room for bit count, finish up with this block */
-    if (byte <= 55)
-    {
-      for (i=0;i<8;i++) XX[56+i] = MDp->count[i];
-      MDblock(MDp,XX);
-    }
-    else /* need to do two blocks to finish up */
-    {
-      MDblock(MDp,XX);
-      for (i=0;i<56;i++) XX[i] = 0;
-      for (i=0;i<8;i++)  XX[56+i] = MDp->count[i];
-      MDblock(MDp,XX);
-    }
-    /* Set flag saying we're done with MD computation */
-    MDp->done = 1;
-  }
-}
-
-/*
-** Finish up MD4 computation and return message digest.
-*/
-void
-MD4Final(buf, MD)
-unsigned char *buf;
-MD4_CTX *MD;
-{
-  int i, j;
-  unsigned int w;
-
-  MD4Update(MD, NULL, 0);
-  for (i = 0; i < 4; ++i) {
-    w = MD->buffer[i];
-    for (j = 0; j < 4; ++j) {
-      *buf++ = w;
-      w >>= 8;
-    }
-  }
-}
-
-/*
-** End of md4.c
-****************************(cut)***********************************/
diff --git a/mdk-stage1/ppp/pppd/md4.h b/mdk-stage1/ppp/pppd/md4.h
deleted file mode 100644
index 80e8f9a2a..000000000
--- a/mdk-stage1/ppp/pppd/md4.h
+++ /dev/null
@@ -1,64 +0,0 @@
-
-/*
-** ********************************************************************
-** md4.h -- Header file for implementation of                        **
-** MD4 Message Digest Algorithm                                      **
-** Updated: 2/13/90 by Ronald L. Rivest                              **
-** (C) 1990 RSA Data Security, Inc.                                  **
-** ********************************************************************
-*/
-
-#ifndef __P
-# if defined(__STDC__) || defined(__GNUC__)
-#  define __P(x) x
-# else
-#  define __P(x) ()
-# endif
-#endif
-
-
-/* MDstruct is the data structure for a message digest computation.
-*/
-typedef struct {
-	unsigned int buffer[4]; /* Holds 4-word result of MD computation */
-	unsigned char count[8]; /* Number of bits processed so far */
-	unsigned int done;      /* Nonzero means MD computation finished */
-} MD4_CTX;
-
-/* MD4Init(MD4_CTX *)
-** Initialize the MD4_CTX prepatory to doing a message digest
-** computation.
-*/
-extern void MD4Init __P((MD4_CTX *MD));
-
-/* MD4Update(MD,X,count)
-** Input: X -- a pointer to an array of unsigned characters.
-**        count -- the number of bits of X to use (an unsigned int).
-** Updates MD using the first "count" bits of X.
-** The array pointed to by X is not modified.
-** If count is not a multiple of 8, MD4Update uses high bits of
-** last byte.
-** This is the basic input routine for a user.
-** The routine terminates the MD computation when count < 512, so
-** every MD computation should end with one call to MD4Update with a
-** count less than 512.  Zero is OK for a count.
-*/
-extern void MD4Update __P((MD4_CTX *MD, unsigned char *X, unsigned int count));
-
-/* MD4Print(MD)
-** Prints message digest buffer MD as 32 hexadecimal digits.
-** Order is from low-order byte of buffer[0] to high-order byte
-** of buffer[3].
-** Each byte is printed with high-order hexadecimal digit first.
-*/
-extern void MD4Print __P((MD4_CTX *));
-
-/* MD4Final(buf, MD)
-** Returns message digest from MD and terminates the message
-** digest computation.
-*/
-extern void MD4Final __P((unsigned char *, MD4_CTX *));
-
-/*
-** End of md4.h
-****************************(cut)***********************************/
diff --git a/mdk-stage1/ppp/pppd/md5.c b/mdk-stage1/ppp/pppd/md5.c
deleted file mode 100644
index 0b8de3aae..000000000
--- a/mdk-stage1/ppp/pppd/md5.c
+++ /dev/null
@@ -1,309 +0,0 @@
-
-
-/*
- ***********************************************************************
- ** md5.c -- the source code for MD5 routines                         **
- ** RSA Data Security, Inc. MD5 Message-Digest Algorithm              **
- ** Created: 2/17/90 RLR                                              **
- ** Revised: 1/91 SRD,AJ,BSK,JT Reference C ver., 7/10 constant corr. **
- ***********************************************************************
- */
-
-/*
- ***********************************************************************
- ** Copyright (C) 1990, RSA Data Security, Inc. All rights reserved.  **
- **                                                                   **
- ** License to copy and use this software is granted provided that    **
- ** it is identified as the "RSA Data Security, Inc. MD5 Message-     **
- ** Digest Algorithm" in all material mentioning or referencing this  **
- ** software or this function.                                        **
- **                                                                   **
- ** License is also granted to make and use derivative works          **
- ** provided that such works are identified as "derived from the RSA  **
- ** Data Security, Inc. MD5 Message-Digest Algorithm" in all          **
- ** material mentioning or referencing the derived work.              **
- **                                                                   **
- ** RSA Data Security, Inc. makes no representations concerning       **
- ** either the merchantability of this software or the suitability    **
- ** of this software for any particular purpose.  It is provided "as  **
- ** is" without express or implied warranty of any kind.              **
- **                                                                   **
- ** These notices must be retained in any copies of any part of this  **
- ** documentation and/or software.                                    **
- ***********************************************************************
- */
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "md5.h"
-
-/*
- ***********************************************************************
- **  Message-digest routines:                                         **
- **  To form the message digest for a message M                       **
- **    (1) Initialize a context buffer mdContext using MD5Init        **
- **    (2) Call MD5Update on mdContext and M                          **
- **    (3) Call MD5Final on mdContext                                 **
- **  The message digest is now in mdContext->digest[0...15]           **
- ***********************************************************************
- */
-
-/* forward declaration */
-static void Transform ();
-
-static unsigned char PADDING[64] = {
-  0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-/* F, G, H and I are basic MD5 functions */
-#define F(x, y, z) (((x) & (y)) | ((~x) & (z)))
-#define G(x, y, z) (((x) & (z)) | ((y) & (~z)))
-#define H(x, y, z) ((x) ^ (y) ^ (z))
-#define I(x, y, z) ((y) ^ ((x) | (~z)))
-
-/* ROTATE_LEFT rotates x left n bits */
-#define ROTATE_LEFT(x, n) (((x) << (n)) | ((x) >> (32-(n))))
-
-/* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4 */
-/* Rotation is separate from addition to prevent recomputation */
-#define FF(a, b, c, d, x, s, ac) \
-  {(a) += F ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define GG(a, b, c, d, x, s, ac) \
-  {(a) += G ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define HH(a, b, c, d, x, s, ac) \
-  {(a) += H ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-#define II(a, b, c, d, x, s, ac) \
-  {(a) += I ((b), (c), (d)) + (x) + (UINT4)(ac); \
-   (a) = ROTATE_LEFT ((a), (s)); \
-   (a) += (b); \
-  }
-
-#ifdef __STDC__
-#define UL(x)	x##U
-#else
-#define UL(x)	x
-#endif
-
-/* The routine MD5Init initializes the message-digest context
-   mdContext. All fields are set to zero.
- */
-void MD5Init (mdContext)
-MD5_CTX *mdContext;
-{
-  mdContext->i[0] = mdContext->i[1] = (UINT4)0;
-
-  /* Load magic initialization constants.
-   */
-  mdContext->buf[0] = (UINT4)0x67452301;
-  mdContext->buf[1] = (UINT4)0xefcdab89;
-  mdContext->buf[2] = (UINT4)0x98badcfe;
-  mdContext->buf[3] = (UINT4)0x10325476;
-}
-
-/* The routine MD5Update updates the message-digest context to
-   account for the presence of each of the characters inBuf[0..inLen-1]
-   in the message whose digest is being computed.
- */
-void MD5Update (mdContext, inBuf, inLen)
-MD5_CTX *mdContext;
-unsigned char *inBuf;
-unsigned int inLen;
-{
-  UINT4 in[16];
-  int mdi;
-  unsigned int i, ii;
-
-  /* compute number of bytes mod 64 */
-  mdi = (int)((mdContext->i[0] >> 3) & 0x3F);
-
-  /* update number of bits */
-  if ((mdContext->i[0] + ((UINT4)inLen << 3)) < mdContext->i[0])
-    mdContext->i[1]++;
-  mdContext->i[0] += ((UINT4)inLen << 3);
-  mdContext->i[1] += ((UINT4)inLen >> 29);
-
-  while (inLen--) {
-    /* add new character to buffer, increment mdi */
-    mdContext->in[mdi++] = *inBuf++;
-
-    /* transform if necessary */
-    if (mdi == 0x40) {
-      for (i = 0, ii = 0; i < 16; i++, ii += 4)
-        in[i] = (((UINT4)mdContext->in[ii+3]) << 24) |
-                (((UINT4)mdContext->in[ii+2]) << 16) |
-                (((UINT4)mdContext->in[ii+1]) << 8) |
-                ((UINT4)mdContext->in[ii]);
-      Transform (mdContext->buf, in);
-      mdi = 0;
-    }
-  }
-}
-
-/* The routine MD5Final terminates the message-digest computation and
-   ends with the desired message digest in mdContext->digest[0...15].
- */
-void MD5Final (hash, mdContext)
-unsigned char hash[];
-MD5_CTX *mdContext;
-{
-  UINT4 in[16];
-  int mdi;
-  unsigned int i, ii;
-  unsigned int padLen;
-
-  /* save number of bits */
-  in[14] = mdContext->i[0];
-  in[15] = mdContext->i[1];
-
-  /* compute number of bytes mod 64 */
-  mdi = (int)((mdContext->i[0] >> 3) & 0x3F);
-
-  /* pad out to 56 mod 64 */
-  padLen = (mdi < 56) ? (56 - mdi) : (120 - mdi);
-  MD5Update (mdContext, PADDING, padLen);
-
-  /* append length in bits and transform */
-  for (i = 0, ii = 0; i < 14; i++, ii += 4)
-    in[i] = (((UINT4)mdContext->in[ii+3]) << 24) |
-            (((UINT4)mdContext->in[ii+2]) << 16) |
-            (((UINT4)mdContext->in[ii+1]) << 8) |
-            ((UINT4)mdContext->in[ii]);
-  Transform (mdContext->buf, in);
-
-  /* store buffer in digest */
-  for (i = 0, ii = 0; i < 4; i++, ii += 4) {
-    mdContext->digest[ii] = (unsigned char)(mdContext->buf[i] & 0xFF);
-    mdContext->digest[ii+1] =
-      (unsigned char)((mdContext->buf[i] >> 8) & 0xFF);
-    mdContext->digest[ii+2] =
-      (unsigned char)((mdContext->buf[i] >> 16) & 0xFF);
-    mdContext->digest[ii+3] =
-      (unsigned char)((mdContext->buf[i] >> 24) & 0xFF);
-  }
-  memcpy(hash, mdContext->digest, 16);
-}
-
-/* Basic MD5 step. Transforms buf based on in.
- */
-static void Transform (buf, in)
-UINT4 *buf;
-UINT4 *in;
-{
-  UINT4 a = buf[0], b = buf[1], c = buf[2], d = buf[3];
-
-  /* Round 1 */
-#define S11 7
-#define S12 12
-#define S13 17
-#define S14 22
-  FF ( a, b, c, d, in[ 0], S11, UL(3614090360)); /* 1 */
-  FF ( d, a, b, c, in[ 1], S12, UL(3905402710)); /* 2 */
-  FF ( c, d, a, b, in[ 2], S13, UL( 606105819)); /* 3 */
-  FF ( b, c, d, a, in[ 3], S14, UL(3250441966)); /* 4 */
-  FF ( a, b, c, d, in[ 4], S11, UL(4118548399)); /* 5 */
-  FF ( d, a, b, c, in[ 5], S12, UL(1200080426)); /* 6 */
-  FF ( c, d, a, b, in[ 6], S13, UL(2821735955)); /* 7 */
-  FF ( b, c, d, a, in[ 7], S14, UL(4249261313)); /* 8 */
-  FF ( a, b, c, d, in[ 8], S11, UL(1770035416)); /* 9 */
-  FF ( d, a, b, c, in[ 9], S12, UL(2336552879)); /* 10 */
-  FF ( c, d, a, b, in[10], S13, UL(4294925233)); /* 11 */
-  FF ( b, c, d, a, in[11], S14, UL(2304563134)); /* 12 */
-  FF ( a, b, c, d, in[12], S11, UL(1804603682)); /* 13 */
-  FF ( d, a, b, c, in[13], S12, UL(4254626195)); /* 14 */
-  FF ( c, d, a, b, in[14], S13, UL(2792965006)); /* 15 */
-  FF ( b, c, d, a, in[15], S14, UL(1236535329)); /* 16 */
-
-  /* Round 2 */
-#define S21 5
-#define S22 9
-#define S23 14
-#define S24 20
-  GG ( a, b, c, d, in[ 1], S21, UL(4129170786)); /* 17 */
-  GG ( d, a, b, c, in[ 6], S22, UL(3225465664)); /* 18 */
-  GG ( c, d, a, b, in[11], S23, UL( 643717713)); /* 19 */
-  GG ( b, c, d, a, in[ 0], S24, UL(3921069994)); /* 20 */
-  GG ( a, b, c, d, in[ 5], S21, UL(3593408605)); /* 21 */
-  GG ( d, a, b, c, in[10], S22, UL(  38016083)); /* 22 */
-  GG ( c, d, a, b, in[15], S23, UL(3634488961)); /* 23 */
-  GG ( b, c, d, a, in[ 4], S24, UL(3889429448)); /* 24 */
-  GG ( a, b, c, d, in[ 9], S21, UL( 568446438)); /* 25 */
-  GG ( d, a, b, c, in[14], S22, UL(3275163606)); /* 26 */
-  GG ( c, d, a, b, in[ 3], S23, UL(4107603335)); /* 27 */
-  GG ( b, c, d, a, in[ 8], S24, UL(1163531501)); /* 28 */
-  GG ( a, b, c, d, in[13], S21, UL(2850285829)); /* 29 */
-  GG ( d, a, b, c, in[ 2], S22, UL(4243563512)); /* 30 */
-  GG ( c, d, a, b, in[ 7], S23, UL(1735328473)); /* 31 */
-  GG ( b, c, d, a, in[12], S24, UL(2368359562)); /* 32 */
-
-  /* Round 3 */
-#define S31 4
-#define S32 11
-#define S33 16
-#define S34 23
-  HH ( a, b, c, d, in[ 5], S31, UL(4294588738)); /* 33 */
-  HH ( d, a, b, c, in[ 8], S32, UL(2272392833)); /* 34 */
-  HH ( c, d, a, b, in[11], S33, UL(1839030562)); /* 35 */
-  HH ( b, c, d, a, in[14], S34, UL(4259657740)); /* 36 */
-  HH ( a, b, c, d, in[ 1], S31, UL(2763975236)); /* 37 */
-  HH ( d, a, b, c, in[ 4], S32, UL(1272893353)); /* 38 */
-  HH ( c, d, a, b, in[ 7], S33, UL(4139469664)); /* 39 */
-  HH ( b, c, d, a, in[10], S34, UL(3200236656)); /* 40 */
-  HH ( a, b, c, d, in[13], S31, UL( 681279174)); /* 41 */
-  HH ( d, a, b, c, in[ 0], S32, UL(3936430074)); /* 42 */
-  HH ( c, d, a, b, in[ 3], S33, UL(3572445317)); /* 43 */
-  HH ( b, c, d, a, in[ 6], S34, UL(  76029189)); /* 44 */
-  HH ( a, b, c, d, in[ 9], S31, UL(3654602809)); /* 45 */
-  HH ( d, a, b, c, in[12], S32, UL(3873151461)); /* 46 */
-  HH ( c, d, a, b, in[15], S33, UL( 530742520)); /* 47 */
-  HH ( b, c, d, a, in[ 2], S34, UL(3299628645)); /* 48 */
-
-  /* Round 4 */
-#define S41 6
-#define S42 10
-#define S43 15
-#define S44 21
-  II ( a, b, c, d, in[ 0], S41, UL(4096336452)); /* 49 */
-  II ( d, a, b, c, in[ 7], S42, UL(1126891415)); /* 50 */
-  II ( c, d, a, b, in[14], S43, UL(2878612391)); /* 51 */
-  II ( b, c, d, a, in[ 5], S44, UL(4237533241)); /* 52 */
-  II ( a, b, c, d, in[12], S41, UL(1700485571)); /* 53 */
-  II ( d, a, b, c, in[ 3], S42, UL(2399980690)); /* 54 */
-  II ( c, d, a, b, in[10], S43, UL(4293915773)); /* 55 */
-  II ( b, c, d, a, in[ 1], S44, UL(2240044497)); /* 56 */
-  II ( a, b, c, d, in[ 8], S41, UL(1873313359)); /* 57 */
-  II ( d, a, b, c, in[15], S42, UL(4264355552)); /* 58 */
-  II ( c, d, a, b, in[ 6], S43, UL(2734768916)); /* 59 */
-  II ( b, c, d, a, in[13], S44, UL(1309151649)); /* 60 */
-  II ( a, b, c, d, in[ 4], S41, UL(4149444226)); /* 61 */
-  II ( d, a, b, c, in[11], S42, UL(3174756917)); /* 62 */
-  II ( c, d, a, b, in[ 2], S43, UL( 718787259)); /* 63 */
-  II ( b, c, d, a, in[ 9], S44, UL(3951481745)); /* 64 */
-
-  buf[0] += a;
-  buf[1] += b;
-  buf[2] += c;
-  buf[3] += d;
-}
-
-/*
- ***********************************************************************
- ** End of md5.c                                                      **
- ******************************** (cut) ********************************
- */
diff --git a/mdk-stage1/ppp/pppd/md5.h b/mdk-stage1/ppp/pppd/md5.h
deleted file mode 100644
index 7492b2228..000000000
--- a/mdk-stage1/ppp/pppd/md5.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- ***********************************************************************
- ** md5.h -- header file for implementation of MD5                    **
- ** RSA Data Security, Inc. MD5 Message-Digest Algorithm              **
- ** Created: 2/17/90 RLR                                              **
- ** Revised: 12/27/90 SRD,AJ,BSK,JT Reference C version               **
- ** Revised (for MD5): RLR 4/27/91                                    **
- **   -- G modified to have y&~z instead of y&z                       **
- **   -- FF, GG, HH modified to add in last register done             **
- **   -- Access pattern: round 2 works mod 5, round 3 works mod 3     **
- **   -- distinct additive constant for each step                     **
- **   -- round 4 added, working mod 7                                 **
- ***********************************************************************
- */
-
-/*
- ***********************************************************************
- ** Copyright (C) 1990, RSA Data Security, Inc. All rights reserved.  **
- **                                                                   **
- ** License to copy and use this software is granted provided that    **
- ** it is identified as the "RSA Data Security, Inc. MD5 Message-     **
- ** Digest Algorithm" in all material mentioning or referencing this  **
- ** software or this function.                                        **
- **                                                                   **
- ** License is also granted to make and use derivative works          **
- ** provided that such works are identified as "derived from the RSA  **
- ** Data Security, Inc. MD5 Message-Digest Algorithm" in all          **
- ** material mentioning or referencing the derived work.              **
- **                                                                   **
- ** RSA Data Security, Inc. makes no representations concerning       **
- ** either the merchantability of this software or the suitability    **
- ** of this software for any particular purpose.  It is provided "as  **
- ** is" without express or implied warranty of any kind.              **
- **                                                                   **
- ** These notices must be retained in any copies of any part of this  **
- ** documentation and/or software.                                    **
- ***********************************************************************
- */
-
-#ifndef __MD5_INCLUDE__
-
-/* typedef a 32-bit type */
-typedef unsigned int UINT4;
-
-/* Data structure for MD5 (Message-Digest) computation */
-typedef struct {
-  UINT4 i[2];                   /* number of _bits_ handled mod 2^64 */
-  UINT4 buf[4];                                    /* scratch buffer */
-  unsigned char in[64];                              /* input buffer */
-  unsigned char digest[16];     /* actual digest after MD5Final call */
-} MD5_CTX;
-
-void MD5Init ();
-void MD5Update ();
-void MD5Final ();
-
-#define __MD5_INCLUDE__
-#endif /* __MD5_INCLUDE__ */
diff --git a/mdk-stage1/ppp/pppd/multilink.c b/mdk-stage1/ppp/pppd/multilink.c
deleted file mode 100644
index c30b07e0a..000000000
--- a/mdk-stage1/ppp/pppd/multilink.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * multilink.c - support routines for multilink.
- *
- * Copyright (c) 2000 Paul Mackerras.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms.  The name of the author may not be
- * used to endorse or promote products derived from this software
- * without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <ctype.h>
-#include <netdb.h>
-#include <errno.h>
-#include <signal.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "tdb.h"
-
-bool endpoint_specified;	/* user gave explicit endpoint discriminator */
-char *bundle_id;		/* identifier for our bundle */
-
-extern TDB_CONTEXT *pppdb;
-extern char db_key[];
-
-static int get_default_epdisc __P((struct epdisc *));
-static int parse_num __P((char *str, const char *key, int *valp));
-static int owns_unit __P((TDB_DATA pid, int unit));
-
-#define set_ip_epdisc(ep, addr) do {	\
-	ep->length = 4;			\
-	ep->value[0] = addr >> 24;	\
-	ep->value[1] = addr >> 16;	\
-	ep->value[2] = addr >> 8;	\
-	ep->value[3] = addr;		\
-} while (0)
-
-#define LOCAL_IP_ADDR(addr)						  \
-	(((addr) & 0xff000000) == 0x0a000000		/* 10.x.x.x */	  \
-	 || ((addr) & 0xfff00000) == 0xac100000		/* 172.16.x.x */  \
-	 || ((addr) & 0xffff0000) == 0xc0a80000)	/* 192.168.x.x */
-
-#define process_exists(n)	(kill((n), 0) == 0 || errno != ESRCH)
-
-void
-mp_check_options()
-{
-	lcp_options *wo = &lcp_wantoptions[0];
-	lcp_options *ao = &lcp_allowoptions[0];
-
-	if (!multilink)
-		return;
-	/* if we're doing multilink, we have to negotiate MRRU */
-	if (!wo->neg_mrru) {
-		/* mrru not specified, default to mru */
-		wo->mrru = wo->mru;
-		wo->neg_mrru = 1;
-	}
-	ao->mrru = ao->mru;
-	ao->neg_mrru = 1;
-
-	if (!wo->neg_endpoint && !noendpoint) {
-		/* get a default endpoint value */
-		wo->neg_endpoint = get_default_epdisc(&wo->endpoint);
-	}
-}
-
-/*
- * Make a new bundle or join us to an existing bundle
- * if we are doing multilink.
- */
-int
-mp_join_bundle()
-{
-	lcp_options *go = &lcp_gotoptions[0];
-	lcp_options *ho = &lcp_hisoptions[0];
-	lcp_options *ao = &lcp_allowoptions[0];
-	int unit, pppd_pid;
-	int l, mtu;
-	char *p;
-	TDB_DATA key, pid, rec;
-
-	if (!go->neg_mrru || !ho->neg_mrru) {
-		/* not doing multilink */
-		if (go->neg_mrru)
-			notice("oops, multilink negotiated only for receive");
-		mtu = ho->neg_mru? ho->mru: PPP_MRU;
-		if (mtu > ao->mru)
-			mtu = ao->mru;
-		if (demand) {
-			/* already have a bundle */
-			cfg_bundle(0, 0, 0, 0);
-			netif_set_mtu(0, mtu);
-			return 0;
-		}
-		make_new_bundle(0, 0, 0, 0);
-		set_ifunit(1);
-		netif_set_mtu(0, mtu);
-		return 0;
-	}
-
-	/*
-	 * Find the appropriate bundle or join a new one.
-	 * First we make up a name for the bundle.
-	 * The length estimate is worst-case assuming every
-	 * character has to be quoted.
-	 */
-	l = 4 * strlen(peer_authname) + 10;
-	if (ho->neg_endpoint)
-		l += 3 * ho->endpoint.length + 8;
-	if (bundle_name)
-		l += 3 * strlen(bundle_name) + 2;
-	bundle_id = malloc(l);
-	if (bundle_id == 0)
-		novm("bundle identifier");
-
-	p = bundle_id;
-	p += slprintf(p, l-1, "BUNDLE=\"%q\"", peer_authname);
-	if (ho->neg_endpoint || bundle_name)
-		*p++ = '/';
-	if (ho->neg_endpoint)
-		p += slprintf(p, bundle_id+l-p, "%s",
-			      epdisc_to_str(&ho->endpoint));
-	if (bundle_name)
-		p += slprintf(p, bundle_id+l-p, "/%v", bundle_name);
-
-	/*
-	 * For demand mode, we only need to configure the bundle
-	 * and attach the link.
-	 */
-	mtu = MIN(ho->mrru, ao->mru);
-	if (demand) {
-		cfg_bundle(go->mrru, ho->mrru, go->neg_ssnhf, ho->neg_ssnhf);
-		netif_set_mtu(0, mtu);
-		script_setenv("BUNDLE", bundle_id + 7, 1);
-		return 0;
-	}
-
-	/*
-	 * Check if the bundle ID is already in the database.
-	 */
-	unit = -1;
-	tdb_writelock(pppdb);
-	key.dptr = bundle_id;
-	key.dsize = p - bundle_id;
-	pid = tdb_fetch(pppdb, key);
-	if (pid.dptr != NULL) {
-		/* bundle ID exists, see if the pppd record exists */
-		rec = tdb_fetch(pppdb, pid);
-		if (rec.dptr != NULL) {
-			/* it is, parse the interface number */
-			parse_num(rec.dptr, "IFNAME=ppp", &unit);
-			/* check the pid value */
-			if (!parse_num(rec.dptr, "PPPD_PID=", &pppd_pid)
-			    || !process_exists(pppd_pid)
-			    || !owns_unit(pid, unit))
-				unit = -1;
-			free(rec.dptr);
-		}
-		free(pid.dptr);
-	}
-
-	if (unit >= 0) {
-		/* attach to existing unit */
-		if (bundle_attach(unit)) {
-			set_ifunit(0);
-			script_setenv("BUNDLE", bundle_id + 7, 0);
-			tdb_writeunlock(pppdb);
-			info("Link attached to %s", ifname);
-			return 1;
-		}
-		/* attach failed because bundle doesn't exist */
-	}
-
-	/* we have to make a new bundle */
-	make_new_bundle(go->mrru, ho->mrru, go->neg_ssnhf, ho->neg_ssnhf);
-	set_ifunit(1);
-	netif_set_mtu(0, mtu);
-	script_setenv("BUNDLE", bundle_id + 7, 1);
-	tdb_writeunlock(pppdb);
-	info("New bundle %s created", ifname);
-	return 0;
-}
-
-static int
-parse_num(str, key, valp)
-     char *str;
-     const char *key;
-     int *valp;
-{
-	char *p, *endp;
-	int i;
-
-	p = strstr(str, key);
-	if (p != 0) {
-		p += strlen(key);
-		i = strtol(p, &endp, 10);
-		if (endp != p && (*endp == 0 || *endp == ';')) {
-			*valp = i;
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * Check whether the pppd identified by `key' still owns ppp unit `unit'.
- */
-static int
-owns_unit(key, unit)
-     TDB_DATA key;
-     int unit;
-{
-	char ifkey[32];
-	TDB_DATA kd, vd;
-	int ret = 0;
-
-	slprintf(ifkey, sizeof(ifkey), "IFNAME=ppp%d", unit);
-	kd.dptr = ifkey;
-	kd.dsize = strlen(ifkey);
-	vd = tdb_fetch(pppdb, kd);
-	if (vd.dptr != NULL) {
-		ret = vd.dsize == key.dsize
-			&& memcmp(vd.dptr, key.dptr, vd.dsize) == 0;
-		free(vd.dptr);
-	}
-	return ret;
-}
-
-static int
-get_default_epdisc(ep)
-     struct epdisc *ep;
-{
-	char *p;
-	struct hostent *hp;
-	u_int32_t addr;
-
-	/* First try for an ethernet MAC address */
-	p = get_first_ethernet();
-	if (p != 0 && get_if_hwaddr(ep->value, p) >= 0) {
-		ep->class = EPD_MAC;
-		ep->length = 6;
-		return 1;
-	}
-
-	/* see if our hostname corresponds to a reasonable IP address */
-	hp = gethostbyname(hostname);
-	if (hp != NULL) {
-		addr = *(u_int32_t *)hp->h_addr;
-		if (!bad_ip_adrs(addr)) {
-			addr = ntohl(addr);
-			if (!LOCAL_IP_ADDR(addr)) {
-				ep->class = EPD_IP;
-				set_ip_epdisc(ep, addr);
-				return 1;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/*
- * epdisc_to_str - make a printable string from an endpoint discriminator.
- */
-
-static char *endp_class_names[] = {
-    "null", "local", "IP", "MAC", "magic", "phone"
-};
-
-char *
-epdisc_to_str(ep)
-     struct epdisc *ep;
-{
-	static char str[MAX_ENDP_LEN*3+8];
-	u_char *p = ep->value;
-	int i, mask = 0;
-	char *q, c, c2;
-
-	if (ep->class == EPD_NULL && ep->length == 0)
-		return "null";
-	if (ep->class == EPD_IP && ep->length == 4) {
-		u_int32_t addr;
-
-		GETLONG(addr, p);
-		slprintf(str, sizeof(str), "IP:%I", htonl(addr));
-		return str;
-	}
-
-	c = ':';
-	c2 = '.';
-	if (ep->class == EPD_MAC && ep->length == 6)
-		c2 = ':';
-	else if (ep->class == EPD_MAGIC && (ep->length % 4) == 0)
-		mask = 3;
-	q = str;
-	if (ep->class <= EPD_PHONENUM)
-		q += slprintf(q, sizeof(str)-1, "%s",
-			      endp_class_names[ep->class]);
-	else
-		q += slprintf(q, sizeof(str)-1, "%d", ep->class);
-	c = ':';
-	for (i = 0; i < ep->length && i < MAX_ENDP_LEN; ++i) {
-		if ((i & mask) == 0) {
-			*q++ = c;
-			c = c2;
-		}
-		q += slprintf(q, str + sizeof(str) - q, "%.2x", ep->value[i]);
-	}
-	return str;
-}
-
-static int hexc_val(int c)
-{
-	if (c >= 'a')
-		return c - 'a' + 10;
-	if (c >= 'A')
-		return c - 'A' + 10;
-	return c - '0';
-}
-
-int
-str_to_epdisc(ep, str)
-     struct epdisc *ep;
-     char *str;
-{
-	int i, l;
-	char *p, *endp;
-
-	for (i = EPD_NULL; i <= EPD_PHONENUM; ++i) {
-		int sl = strlen(endp_class_names[i]);
-		if (strncasecmp(str, endp_class_names[i], sl) == 0) {
-			str += sl;
-			break;
-		}
-	}
-	if (i > EPD_PHONENUM) {
-		/* not a class name, try a decimal class number */
-		i = strtol(str, &endp, 10);
-		if (endp == str)
-			return 0;	/* can't parse class number */
-		str = endp;
-	}
-	ep->class = i;
-	if (*str == 0) {
-		ep->length = 0;
-		return 1;
-	}
-	if (*str != ':' && *str != '.')
-		return 0;
-	++str;
-
-	if (i == EPD_IP) {
-		u_int32_t addr;
-		i = parse_dotted_ip(str, &addr);
-		if (i == 0 || str[i] != 0)
-			return 0;
-		set_ip_epdisc(ep, addr);
-		return 1;
-	}
-	if (i == EPD_MAC && get_if_hwaddr(ep->value, str) >= 0) {
-		ep->length = 6;
-		return 1;
-	}
-
-	p = str;
-	for (l = 0; l < MAX_ENDP_LEN; ++l) {
-		if (*str == 0)
-			break;
-		if (p <= str)
-			for (p = str; isxdigit(*p); ++p)
-				;
-		i = p - str;
-		if (i == 0)
-			return 0;
-		ep->value[l] = hexc_val(*str++);
-		if ((i & 1) == 0)
-			ep->value[l] = (ep->value[l] << 4) + hexc_val(*str++);
-		if (*str == ':' || *str == '.')
-			++str;
-	}
-	if (*str != 0 || (ep->class == EPD_MAC && l != 6))
-		return 0;
-	ep->length = l;
-	return 1;
-}
-
diff --git a/mdk-stage1/ppp/pppd/options.c b/mdk-stage1/ppp/pppd/options.c
deleted file mode 100644
index 1921d9ec5..000000000
--- a/mdk-stage1/ppp/pppd/options.c
+++ /dev/null
@@ -1,1513 +0,0 @@
-/*
- * options.c - handles option processing for PPP.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <ctype.h>
-#include <stdio.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <pwd.h>
-#ifdef PLUGIN
-#include <dlfcn.h>
-#endif
-#ifdef PPP_FILTER
-#include <pcap.h>
-#include <pcap-int.h>	/* XXX: To get struct pcap */
-#endif
-
-#include "pppd.h"
-#include "pathnames.h"
-
-#if defined(ultrix) || defined(NeXT)
-char *strdup __P((char *));
-#endif
-
-static const char rcsid[] = RCSID;
-
-struct option_value {
-    struct option_value *next;
-    const char *source;
-    char value[1];
-};
-
-/*
- * Option variables and default values.
- */
-#ifdef PPP_FILTER
-int	dflag = 0;		/* Tell libpcap we want debugging */
-#endif
-int	debug = 0;		/* Debug flag */
-int	kdebugflag = 0;		/* Tell kernel to print debug messages */
-int	default_device = 1;	/* Using /dev/tty or equivalent */
-char	devnam[MAXPATHLEN];	/* Device name */
-bool	nodetach = 0;		/* Don't detach from controlling tty */
-bool	updetach = 0;		/* Detach once link is up */
-int	maxconnect = 0;		/* Maximum connect time */
-char	user[MAXNAMELEN];	/* Username for PAP */
-char	passwd[MAXSECRETLEN];	/* Password for PAP */
-bool	persist = 0;		/* Reopen link after it goes down */
-char	our_name[MAXNAMELEN];	/* Our name for authentication purposes */
-bool	demand = 0;		/* do dial-on-demand */
-char	*ipparam = NULL;	/* Extra parameter for ip up/down scripts */
-int	idle_time_limit = 0;	/* Disconnect if idle for this many seconds */
-int	holdoff = 30;		/* # seconds to pause before reconnecting */
-bool	holdoff_specified;	/* true if a holdoff value has been given */
-int	log_to_fd = 1;		/* send log messages to this fd too */
-bool	log_default = 1;	/* log_to_fd is default (stdout) */
-int	maxfail = 10;		/* max # of unsuccessful connection attempts */
-char	linkname[MAXPATHLEN];	/* logical name for link */
-bool	tune_kernel;		/* may alter kernel settings */
-int	connect_delay = 1000;	/* wait this many ms after connect script */
-int	req_unit = -1;		/* requested interface unit */
-bool	multilink = 0;		/* Enable multilink operation */
-char	*bundle_name = NULL;	/* bundle name for multilink */
-bool	dump_options;		/* print out option values */
-bool	dryrun;			/* print out option values and exit */
-char	*domain;		/* domain name set by domain option */
-
-extern option_t auth_options[];
-extern struct stat devstat;
-
-#ifdef PPP_FILTER
-struct	bpf_program pass_filter;/* Filter program for packets to pass */
-struct	bpf_program active_filter; /* Filter program for link-active pkts */
-pcap_t  pc;			/* Fake struct pcap so we can compile expr */
-#endif
-
-char *current_option;		/* the name of the option being parsed */
-int  privileged_option;		/* set iff the current option came from root */
-char *option_source;		/* string saying where the option came from */
-int  option_priority = OPRIO_CFGFILE; /* priority of the current options */
-bool devnam_fixed;		/* can no longer change device name */
-
-static int logfile_fd = -1;	/* fd opened for log file */
-static char logfile_name[MAXPATHLEN];	/* name of log file */
-
-/*
- * Prototypes
- */
-static int setdomain __P((char **));
-static int readfile __P((char **));
-static int callfile __P((char **));
-static int showversion __P((char **));
-static int showhelp __P((char **));
-static void usage __P((void));
-static int setlogfile __P((char **));
-#ifdef PLUGIN
-static int loadplugin __P((char **));
-#endif
-
-#ifdef PPP_FILTER
-static int setpassfilter __P((char **));
-static int setactivefilter __P((char **));
-#endif
-
-static option_t *find_option __P((const char *name));
-static int process_option __P((option_t *, char *, char **));
-static int n_arguments __P((option_t *));
-static int number_option __P((char *, u_int32_t *, int));
-
-/*
- * Structure to store extra lists of options.
- */
-struct option_list {
-    option_t *options;
-    struct option_list *next;
-};
-
-static struct option_list *extra_options = NULL;
-
-/*
- * Valid arguments.
- */
-option_t general_options[] = {
-    { "debug", o_int, &debug,
-      "Increase debugging level", OPT_INC | OPT_NOARG | 1 },
-    { "-d", o_int, &debug,
-      "Increase debugging level",
-      OPT_ALIAS | OPT_INC | OPT_NOARG | 1 },
-
-    { "kdebug", o_int, &kdebugflag,
-      "Set kernel driver debug level", OPT_PRIO },
-
-    { "nodetach", o_bool, &nodetach,
-      "Don't detach from controlling tty", OPT_PRIO | 1 },
-    { "-detach", o_bool, &nodetach,
-      "Don't detach from controlling tty", OPT_ALIAS | OPT_PRIOSUB | 1 },
-    { "updetach", o_bool, &updetach,
-      "Detach from controlling tty once link is up",
-      OPT_PRIOSUB | OPT_A2CLR | 1, &nodetach },
-
-    { "holdoff", o_int, &holdoff,
-      "Set time in seconds before retrying connection", OPT_PRIO },
-
-    { "idle", o_int, &idle_time_limit,
-      "Set time in seconds before disconnecting idle link", OPT_PRIO },
-
-    { "maxconnect", o_int, &maxconnect,
-      "Set connection time limit",
-      OPT_PRIO | OPT_LLIMIT | OPT_NOINCR | OPT_ZEROINF },
-
-    { "domain", o_special, (void *)setdomain,
-      "Add given domain name to hostname",
-      OPT_PRIO | OPT_PRIV | OPT_A2STRVAL, &domain },
-
-    { "file", o_special, (void *)readfile,
-      "Take options from a file", OPT_NOPRINT },
-    { "call", o_special, (void *)callfile,
-      "Take options from a privileged file", OPT_NOPRINT },
-
-    { "persist", o_bool, &persist,
-      "Keep on reopening connection after close", OPT_PRIO | 1 },
-    { "nopersist", o_bool, &persist,
-      "Turn off persist option", OPT_PRIOSUB },
-
-    { "demand", o_bool, &demand,
-      "Dial on demand", OPT_INITONLY | 1, &persist },
-
-    { "--version", o_special_noarg, (void *)showversion,
-      "Show version number" },
-    { "--help", o_special_noarg, (void *)showhelp,
-      "Show brief listing of options" },
-    { "-h", o_special_noarg, (void *)showhelp,
-      "Show brief listing of options", OPT_ALIAS },
-
-    { "logfile", o_special, (void *)setlogfile,
-      "Append log messages to this file",
-      OPT_PRIO | OPT_A2STRVAL | OPT_STATIC, &logfile_name },
-    { "logfd", o_int, &log_to_fd,
-      "Send log messages to this file descriptor",
-      OPT_PRIOSUB | OPT_A2CLR, &log_default },
-    { "nolog", o_int, &log_to_fd,
-      "Don't send log messages to any file",
-      OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
-    { "nologfd", o_int, &log_to_fd,
-      "Don't send log messages to any file descriptor",
-      OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
-
-    { "linkname", o_string, linkname,
-      "Set logical name for link",
-      OPT_PRIO | OPT_PRIV | OPT_STATIC, NULL, MAXPATHLEN },
-
-    { "maxfail", o_int, &maxfail,
-      "Maximum number of unsuccessful connection attempts to allow",
-      OPT_PRIO },
-
-    { "ktune", o_bool, &tune_kernel,
-      "Alter kernel settings as necessary", OPT_PRIO | 1 },
-    { "noktune", o_bool, &tune_kernel,
-      "Don't alter kernel settings", OPT_PRIOSUB },
-
-    { "connect-delay", o_int, &connect_delay,
-      "Maximum time (in ms) to wait after connect script finishes",
-      OPT_PRIO },
-
-    { "unit", o_int, &req_unit,
-      "PPP interface unit number to use if possible",
-      OPT_PRIO | OPT_LLIMIT, 0, 0 },
-
-    { "dump", o_bool, &dump_options,
-      "Print out option values after parsing all options", 1 },
-    { "dryrun", o_bool, &dryrun,
-      "Stop after parsing, printing, and checking options", 1 },
-
-#ifdef HAVE_MULTILINK
-    { "multilink", o_bool, &multilink,
-      "Enable multilink operation", OPT_PRIO | 1 },
-    { "mp", o_bool, &multilink,
-      "Enable multilink operation", OPT_PRIOSUB | OPT_ALIAS | 1 },
-    { "nomultilink", o_bool, &multilink,
-      "Disable multilink operation", OPT_PRIOSUB | 0 },
-    { "nomp", o_bool, &multilink,
-      "Disable multilink operation", OPT_PRIOSUB | OPT_ALIAS | 0 },
-
-    { "bundle", o_string, &bundle_name,
-      "Bundle name for multilink", OPT_PRIO },
-#endif /* HAVE_MULTILINK */
-
-#ifdef PLUGIN
-    { "plugin", o_special, (void *)loadplugin,
-      "Load a plug-in module into pppd", OPT_PRIV | OPT_A2LIST },
-#endif
-
-#ifdef PPP_FILTER
-    { "pdebug", o_int, &dflag,
-      "libpcap debugging", OPT_PRIO },
-
-    { "pass-filter", 1, setpassfilter,
-      "set filter for packets to pass", OPT_PRIO },
-
-    { "active-filter", 1, setactivefilter,
-      "set filter for active pkts", OPT_PRIO },
-#endif
-
-    { NULL }
-};
-
-#ifndef IMPLEMENTATION
-#define IMPLEMENTATION ""
-#endif
-
-static char *usage_string = "\
-pppd version %s\n\
-Usage: %s [ options ], where options are:\n\
-	<device>	Communicate over the named device\n\
-	<speed>		Set the baud rate to <speed>\n\
-	<loc>:<rem>	Set the local and/or remote interface IP\n\
-			addresses.  Either one may be omitted.\n\
-	asyncmap <n>	Set the desired async map to hex <n>\n\
-	auth		Require authentication from peer\n\
-        connect <p>     Invoke shell command <p> to set up the serial line\n\
-	crtscts		Use hardware RTS/CTS flow control\n\
-	defaultroute	Add default route through interface\n\
-	file <f>	Take options from file <f>\n\
-	modem		Use modem control lines\n\
-	mru <n>		Set MRU value to <n> for negotiation\n\
-See pppd(8) for more options.\n\
-";
-
-/*
- * parse_args - parse a string of arguments from the command line.
- */
-int
-parse_args(argc, argv)
-    int argc;
-    char **argv;
-{
-    char *arg;
-    option_t *opt;
-    int n;
-
-    privileged_option = privileged;
-    option_source = "command line";
-    option_priority = OPRIO_CMDLINE;
-    while (argc > 0) {
-	arg = *argv++;
-	--argc;
-	opt = find_option(arg);
-	if (opt == NULL) {
-	    option_error("unrecognized option '%s'", arg);
-	    usage();
-	    return 0;
-	}
-	n = n_arguments(opt);
-	if (argc < n) {
-	    option_error("too few parameters for option %s", arg);
-	    return 0;
-	}
-	if (!process_option(opt, arg, argv))
-	    return 0;
-	argc -= n;
-	argv += n;
-    }
-    return 1;
-}
-
-/*
- * options_from_file - Read a string of options from a file,
- * and interpret them.
- */
-int
-options_from_file(filename, must_exist, check_prot, priv)
-    char *filename;
-    int must_exist;
-    int check_prot;
-    int priv;
-{
-    FILE *f;
-    int i, newline, ret, err;
-    option_t *opt;
-    int oldpriv, n;
-    char *oldsource;
-    char *argv[MAXARGS];
-    char args[MAXARGS][MAXWORDLEN];
-    char cmd[MAXWORDLEN];
-
-    if (check_prot)
-	seteuid(getuid());
-    f = fopen(filename, "r");
-    err = errno;
-    if (check_prot)
-	seteuid(0);
-    if (f == NULL) {
-	errno = err;
-	if (!must_exist) {
-	    if (err != ENOENT && err != ENOTDIR)
-		warn("Warning: can't open options file %s: %m", filename);
-	    return 1;
-	}
-	option_error("Can't open options file %s: %m", filename);
-	return 0;
-    }
-
-    oldpriv = privileged_option;
-    privileged_option = priv;
-    oldsource = option_source;
-    option_source = strdup(filename);
-    if (option_source == NULL)
-	option_source = "file";
-    ret = 0;
-    while (getword(f, cmd, &newline, filename)) {
-	opt = find_option(cmd);
-	if (opt == NULL) {
-	    option_error("In file %s: unrecognized option '%s'",
-			 filename, cmd);
-	    goto err;
-	}
-	n = n_arguments(opt);
-	for (i = 0; i < n; ++i) {
-	    if (!getword(f, args[i], &newline, filename)) {
-		option_error(
-			"In file %s: too few parameters for option '%s'",
-			filename, cmd);
-		goto err;
-	    }
-	    argv[i] = args[i];
-	}
-	if (!process_option(opt, cmd, argv))
-	    goto err;
-    }
-    ret = 1;
-
-err:
-    fclose(f);
-    privileged_option = oldpriv;
-    option_source = oldsource;
-    return ret;
-}
-
-/*
- * options_from_user - See if the use has a ~/.ppprc file,
- * and if so, interpret options from it.
- */
-int
-options_from_user()
-{
-    char *user, *path, *file;
-    int ret;
-    struct passwd *pw;
-    size_t pl;
-
-    pw = getpwuid(getuid());
-    if (pw == NULL || (user = pw->pw_dir) == NULL || user[0] == 0)
-	return 1;
-    file = _PATH_USEROPT;
-    pl = strlen(user) + strlen(file) + 2;
-    path = malloc(pl);
-    if (path == NULL)
-	novm("init file name");
-    slprintf(path, pl, "%s/%s", user, file);
-    option_priority = OPRIO_CFGFILE;
-    ret = options_from_file(path, 0, 1, privileged);
-    free(path);
-    return ret;
-}
-
-/*
- * options_for_tty - See if an options file exists for the serial
- * device, and if so, interpret options from it.
- * We only allow the per-tty options file to override anything from
- * the command line if it is something that the user can't override
- * once it has been set by root; this is done by giving configuration
- * files a lower priority than the command line.
- */
-int
-options_for_tty()
-{
-    char *dev, *path, *p;
-    int ret;
-    size_t pl;
-
-    dev = devnam;
-    if (strncmp(dev, "/dev/", 5) == 0)
-	dev += 5;
-    if (dev[0] == 0 || strcmp(dev, "tty") == 0)
-	return 1;		/* don't look for /etc/ppp/options.tty */
-    pl = strlen(_PATH_TTYOPT) + strlen(dev) + 1;
-    path = malloc(pl);
-    if (path == NULL)
-	novm("tty init file name");
-    slprintf(path, pl, "%s%s", _PATH_TTYOPT, dev);
-    /* Turn slashes into dots, for Solaris case (e.g. /dev/term/a) */
-    for (p = path + strlen(_PATH_TTYOPT); *p != 0; ++p)
-	if (*p == '/')
-	    *p = '.';
-    option_priority = OPRIO_CFGFILE;
-    ret = options_from_file(path, 0, 0, 1);
-    free(path);
-    return ret;
-}
-
-/*
- * options_from_list - process a string of options in a wordlist.
- */
-int
-options_from_list(w, priv)
-    struct wordlist *w;
-    int priv;
-{
-    char *argv[MAXARGS];
-    option_t *opt;
-    int i, n, ret = 0;
-    struct wordlist *w0;
-
-    privileged_option = priv;
-    option_source = "secrets file";
-    option_priority = OPRIO_SECFILE;
-
-    while (w != NULL) {
-	opt = find_option(w->word);
-	if (opt == NULL) {
-	    option_error("In secrets file: unrecognized option '%s'",
-			 w->word);
-	    goto err;
-	}
-	n = n_arguments(opt);
-	w0 = w;
-	for (i = 0; i < n; ++i) {
-	    w = w->next;
-	    if (w == NULL) {
-		option_error(
-			"In secrets file: too few parameters for option '%s'",
-			w0->word);
-		goto err;
-	    }
-	    argv[i] = w->word;
-	}
-	if (!process_option(opt, w0->word, argv))
-	    goto err;
-	w = w->next;
-    }
-    ret = 1;
-
-err:
-    return ret;
-}
-
-/*
- * match_option - see if this option matches an option_t structure.
- */
-static int
-match_option(name, opt, dowild)
-    char *name;
-    option_t *opt;
-    int dowild;
-{
-	int (*match) __P((char *, char **, int));
-
-	if (dowild != (opt->type == o_wild))
-		return 0;
-	if (!dowild)
-		return strcmp(name, opt->name) == 0;
-	match = (int (*) __P((char *, char **, int))) opt->addr;
-	return (*match)(name, NULL, 0);
-}
-
-/*
- * find_option - scan the option lists for the various protocols
- * looking for an entry with the given name.
- * This could be optimized by using a hash table.
- */
-static option_t *
-find_option(name)
-    const char *name;
-{
-	option_t *opt;
-	struct option_list *list;
-	int i, dowild;
-
-	for (dowild = 0; dowild <= 1; ++dowild) {
-		for (opt = general_options; opt->name != NULL; ++opt)
-			if (match_option(name, opt, dowild))
-				return opt;
-		for (opt = auth_options; opt->name != NULL; ++opt)
-			if (match_option(name, opt, dowild))
-				return opt;
-		for (list = extra_options; list != NULL; list = list->next)
-			for (opt = list->options; opt->name != NULL; ++opt)
-				if (match_option(name, opt, dowild))
-					return opt;
-		for (opt = the_channel->options; opt->name != NULL; ++opt)
-			if (match_option(name, opt, dowild))
-				return opt;
-		for (i = 0; protocols[i] != NULL; ++i)
-			if ((opt = protocols[i]->options) != NULL)
-				for (; opt->name != NULL; ++opt)
-					if (match_option(name, opt, dowild))
-						return opt;
-	}
-	return NULL;
-}
-
-/*
- * process_option - process one new-style option.
- */
-static int
-process_option(opt, cmd, argv)
-    option_t *opt;
-    char *cmd;
-    char **argv;
-{
-    u_int32_t v;
-    int iv, a;
-    char *sv;
-    int (*parser) __P((char **));
-    int (*wildp) __P((char *, char **, int));
-    char *optopt = (opt->type == o_wild)? "": " option";
-    int prio = option_priority;
-    option_t *mainopt = opt;
-
-    if ((opt->flags & OPT_PRIVFIX) && privileged_option)
-	prio += OPRIO_ROOT;
-    while (mainopt->flags & OPT_PRIOSUB)
-	--mainopt;
-    if (mainopt->flags & OPT_PRIO) {
-	if (prio < mainopt->priority) {
-	    /* new value doesn't override old */
-	    if (prio == OPRIO_CMDLINE && mainopt->priority > OPRIO_ROOT) {
-		option_error("%s%s set in %s cannot be overridden\n",
-			     opt->name, optopt, mainopt->source);
-		return 0;
-	    }
-	    return 1;
-	}
-	if (prio > OPRIO_ROOT && mainopt->priority == OPRIO_CMDLINE)
-	    warn("%s%s from %s overrides command line",
-		 opt->name, optopt, option_source);
-    }
-
-    if ((opt->flags & OPT_INITONLY) && phase != PHASE_INITIALIZE) {
-	option_error("%s%s cannot be changed after initialization",
-		     opt->name, optopt);
-	return 0;
-    }
-    if ((opt->flags & OPT_PRIV) && !privileged_option) {
-	option_error("using the %s%s requires root privilege",
-		     opt->name, optopt);
-	return 0;
-    }
-    if ((opt->flags & OPT_ENABLE) && *(bool *)(opt->addr2) == 0) {
-	option_error("%s%s is disabled", opt->name, optopt);
-	return 0;
-    }
-    if ((opt->flags & OPT_DEVEQUIV) && devnam_fixed) {
-	option_error("the %s%s may not be changed in %s",
-		     opt->name, optopt, option_source);
-	return 0;
-    }
-
-    switch (opt->type) {
-    case o_bool:
-	v = opt->flags & OPT_VALUE;
-	*(bool *)(opt->addr) = v;
-	if (opt->addr2 && (opt->flags & OPT_A2COPY))
-	    *(bool *)(opt->addr2) = v;
-	break;
-
-    case o_int:
-	iv = 0;
-	if ((opt->flags & OPT_NOARG) == 0) {
-	    if (!int_option(*argv, &iv))
-		return 0;
-	    if ((((opt->flags & OPT_LLIMIT) && iv < opt->lower_limit)
-		 || ((opt->flags & OPT_ULIMIT) && iv > opt->upper_limit))
-		&& !((opt->flags & OPT_ZEROOK && iv == 0))) {
-		char *zok = (opt->flags & OPT_ZEROOK)? " zero or": "";
-		switch (opt->flags & OPT_LIMITS) {
-		case OPT_LLIMIT:
-		    option_error("%s value must be%s >= %d",
-				 opt->name, zok, opt->lower_limit);
-		    break;
-		case OPT_ULIMIT:
-		    option_error("%s value must be%s <= %d",
-				 opt->name, zok, opt->upper_limit);
-		    break;
-		case OPT_LIMITS:
-		    option_error("%s value must be%s between %d and %d",
-				opt->name, opt->lower_limit, opt->upper_limit);
-		    break;
-		}
-		return 0;
-	    }
-	}
-	a = opt->flags & OPT_VALUE;
-	if (a >= 128)
-	    a -= 256;		/* sign extend */
-	iv += a;
-	if (opt->flags & OPT_INC)
-	    iv += *(int *)(opt->addr);
-	if ((opt->flags & OPT_NOINCR) && !privileged_option) {
-	    int oldv = *(int *)(opt->addr);
-	    if ((opt->flags & OPT_ZEROINF) ?
-		(oldv != 0 && (iv == 0 || iv > oldv)) : (iv > oldv)) {
-		option_error("%s value cannot be increased", opt->name);
-		return 0;
-	    }
-	}
-	*(int *)(opt->addr) = iv;
-	if (opt->addr2 && (opt->flags & OPT_A2COPY))
-	    *(int *)(opt->addr2) = iv;
-	break;
-
-    case o_uint32:
-	if (opt->flags & OPT_NOARG) {
-	    v = opt->flags & OPT_VALUE;
-	    if (v & 0x80)
-		    v |= 0xffffff00U;
-	} else if (!number_option(*argv, &v, 16))
-	    return 0;
-	if (opt->flags & OPT_OR)
-	    v |= *(u_int32_t *)(opt->addr);
-	*(u_int32_t *)(opt->addr) = v;
-	if (opt->addr2 && (opt->flags & OPT_A2COPY))
-	    *(u_int32_t *)(opt->addr2) = v;
-	break;
-
-    case o_string:
-	if (opt->flags & OPT_STATIC) {
-	    strlcpy((char *)(opt->addr), *argv, opt->upper_limit);
-	} else {
-	    sv = strdup(*argv);
-	    if (sv == NULL)
-		novm("option argument");
-	    *(char **)(opt->addr) = sv;
-	}
-	break;
-
-    case o_special_noarg:
-    case o_special:
-	parser = (int (*) __P((char **))) opt->addr;
-	if (!(*parser)(argv))
-	    return 0;
-	if (opt->flags & OPT_A2LIST) {
-	    struct option_value *ovp, **pp;
-
-	    ovp = malloc(sizeof(*ovp) + strlen(*argv));
-	    if (ovp != 0) {
-		strcpy(ovp->value, *argv);
-		ovp->source = option_source;
-		ovp->next = NULL;
-		pp = (struct option_value **) &opt->addr2;
-		while (*pp != 0)
-		    pp = &(*pp)->next;
-		*pp = ovp;
-	    }
-	}
-	break;
-
-    case o_wild:
-	wildp = (int (*) __P((char *, char **, int))) opt->addr;
-	if (!(*wildp)(cmd, argv, 1))
-	    return 0;
-	break;
-    }
-
-    if (opt->addr2 && (opt->flags & (OPT_A2COPY|OPT_ENABLE
-		|OPT_A2PRINTER|OPT_A2STRVAL|OPT_A2LIST)) == 0)
-	*(bool *)(opt->addr2) = !(opt->flags & OPT_A2CLR);
-
-    mainopt->source = option_source;
-    mainopt->priority = prio;
-    mainopt->winner = opt - mainopt;
-
-    return 1;
-}
-
-/*
- * override_value - if the option priorities would permit us to
- * override the value of option, return 1 and update the priority
- * and source of the option value.  Otherwise returns 0.
- */
-int
-override_value(option, priority, source)
-    const char *option;
-    int priority;
-    const char *source;
-{
-	option_t *opt;
-
-	opt = find_option(option);
-	if (opt == NULL)
-		return 0;
-	while (opt->flags & OPT_PRIOSUB)
-		--opt;
-	if ((opt->flags & OPT_PRIO) && priority < opt->priority)
-		return 0;
-	opt->priority = priority;
-	opt->source = source;
-	opt->winner = -1;
-	return 1;
-}
-
-/*
- * n_arguments - tell how many arguments an option takes
- */
-static int
-n_arguments(opt)
-    option_t *opt;
-{
-	return (opt->type == o_bool || opt->type == o_special_noarg
-		|| (opt->flags & OPT_NOARG))? 0: 1;
-}
-
-/*
- * add_options - add a list of options to the set we grok.
- */
-void
-add_options(opt)
-    option_t *opt;
-{
-    struct option_list *list;
-
-    list = malloc(sizeof(*list));
-    if (list == 0)
-	novm("option list entry");
-    list->options = opt;
-    list->next = extra_options;
-    extra_options = list;
-}
-
-/*
- * check_options - check that options are valid and consistent.
- */
-void
-check_options()
-{
-	if (logfile_fd >= 0 && logfile_fd != log_to_fd)
-		close(logfile_fd);
-}
-
-/*
- * print_option - print out an option and its value
- */
-static void
-print_option(opt, mainopt, printer, arg)
-    option_t *opt, *mainopt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	int i, v;
-	char *p;
-
-	if (opt->flags & OPT_NOPRINT)
-		return;
-	switch (opt->type) {
-	case o_bool:
-		v = opt->flags & OPT_VALUE;
-		if (*(bool *)opt->addr != v)
-			/* this can happen legitimately, e.g. lock
-			   option turned off for default device */
-			break;
-		printer(arg, "%s", opt->name);
-		break;
-	case o_int:
-		v = opt->flags & OPT_VALUE;
-		if (v >= 128)
-			v -= 256;
-		i = *(int *)opt->addr;
-		if (opt->flags & OPT_NOARG) {
-			printer(arg, "%s", opt->name);
-			if (i != v) {
-				if (opt->flags & OPT_INC) {
-					for (; i > v; i -= v)
-						printer(arg, " %s", opt->name);
-				} else
-					printer(arg, " # oops: %d not %d\n",
-						i, v);
-			}
-		} else {
-			printer(arg, "%s %d", opt->name, i);
-		}
-		break;
-	case o_uint32:
-		printer(arg, "%s", opt->name);
-		if ((opt->flags & OPT_NOARG) == 0)
-			printer(arg, " %x", *(u_int32_t *)opt->addr);
-		break;
-
-	case o_string:
-		if (opt->flags & OPT_HIDE) {
-			p = "??????";
-		} else {
-			p = (char *) opt->addr;
-			if ((opt->flags & OPT_STATIC) == 0)
-				p = *(char **)p;
-		}
-		printer(arg, "%s %q", opt->name, p);
-		break;
-
-	case o_special:
-	case o_special_noarg:
-	case o_wild:
-		if (opt->type != o_wild) {
-			printer(arg, "%s", opt->name);
-			if (n_arguments(opt) == 0)
-				break;
-			printer(arg, " ");
-		}
-		if (opt->flags & OPT_A2PRINTER) {
-			void (*oprt) __P((option_t *,
-					  void ((*)__P((void *, char *, ...))),
-					  void *));
-			oprt = opt->addr2;
-			(*oprt)(opt, printer, arg);
-		} else if (opt->flags & OPT_A2STRVAL) {
-			p = (char *) opt->addr2;
-			if ((opt->flags & OPT_STATIC) == 0)
-				p = *(char **)p;
-			printer("%q", p);
-		} else if (opt->flags & OPT_A2LIST) {
-			struct option_value *ovp;
-
-			ovp = (struct option_value *) opt->addr2;
-			for (;;) {
-				printer(arg, "%q", ovp->value);
-				if ((ovp = ovp->next) == NULL)
-					break;
-				printer(arg, "\t\t# (from %s)\n%s ",
-					ovp->source, opt->name);
-			}
-		} else {
-			printer(arg, "xxx # [don't know how to print value]");
-		}
-		break;
-
-	default:
-		printer(arg, "# %s value (type %d)", opt->name, opt->type);
-		break;
-	}
-	printer(arg, "\t\t# (from %s)\n", mainopt->source);
-}
-
-/*
- * print_option_list - print out options in effect from an
- * array of options.
- */
-static void
-print_option_list(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	while (opt->name != NULL) {
-		if (opt->priority != OPRIO_DEFAULT
-		    && opt->winner != (short int) -1)
-			print_option(opt + opt->winner, opt, printer, arg);
-		do {
-			++opt;
-		} while (opt->flags & OPT_PRIOSUB);
-	}
-}
-
-/*
- * print_options - print out what options are in effect.
- */
-void
-print_options(printer, arg)
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	struct option_list *list;
-	int i;
-
-	printer(arg, "pppd options in effect:\n");
-	print_option_list(general_options, printer, arg);
-	print_option_list(auth_options, printer, arg);
-	for (list = extra_options; list != NULL; list = list->next)
-		print_option_list(list->options, printer, arg);
-	print_option_list(the_channel->options, printer, arg);
-	for (i = 0; protocols[i] != NULL; ++i)
-		print_option_list(protocols[i]->options, printer, arg);
-}
-
-/*
- * usage - print out a message telling how to use the program.
- */
-static void
-usage()
-{
-    if (phase == PHASE_INITIALIZE)
-	fprintf(stderr, usage_string, VERSION, progname);
-}
-
-/*
- * showhelp - print out usage message and exit.
- */
-static int
-showhelp(argv)
-    char **argv;
-{
-    if (phase == PHASE_INITIALIZE) {
-	usage();
-	exit(0);
-    }
-    return 0;
-}
-
-/*
- * showversion - print out the version number and exit.
- */
-static int
-showversion(argv)
-    char **argv;
-{
-    if (phase == PHASE_INITIALIZE) {
-	fprintf(stderr, "pppd version %s\n", VERSION);
-	exit(0);
-    }
-    return 0;
-}
-
-/*
- * option_error - print a message about an error in an option.
- * The message is logged, and also sent to
- * stderr if phase == PHASE_INITIALIZE.
- */
-void
-option_error __V((char *fmt, ...))
-{
-    va_list args;
-    char buf[1024];
-
-#if defined(__STDC__)
-    va_start(args, fmt);
-#else
-    char *fmt;
-    va_start(args);
-    fmt = va_arg(args, char *);
-#endif
-    vslprintf(buf, sizeof(buf), fmt, args);
-    va_end(args);
-    if (phase == PHASE_INITIALIZE)
-	fprintf(stderr, "%s: %s\n", progname, buf);
-    syslog(LOG_ERR, "%s", buf);
-}
-
-#if 0
-/*
- * readable - check if a file is readable by the real user.
- */
-int
-readable(fd)
-    int fd;
-{
-    uid_t uid;
-    int i;
-    struct stat sbuf;
-
-    uid = getuid();
-    if (uid == 0)
-	return 1;
-    if (fstat(fd, &sbuf) != 0)
-	return 0;
-    if (sbuf.st_uid == uid)
-	return sbuf.st_mode & S_IRUSR;
-    if (sbuf.st_gid == getgid())
-	return sbuf.st_mode & S_IRGRP;
-    for (i = 0; i < ngroups; ++i)
-	if (sbuf.st_gid == groups[i])
-	    return sbuf.st_mode & S_IRGRP;
-    return sbuf.st_mode & S_IROTH;
-}
-#endif
-
-/*
- * Read a word from a file.
- * Words are delimited by white-space or by quotes (" or ').
- * Quotes, white-space and \ may be escaped with \.
- * \<newline> is ignored.
- */
-int
-getword(f, word, newlinep, filename)
-    FILE *f;
-    char *word;
-    int *newlinep;
-    char *filename;
-{
-    int c, len, escape;
-    int quoted, comment;
-    int value, digit, got, n;
-
-#define isoctal(c) ((c) >= '0' && (c) < '8')
-
-    *newlinep = 0;
-    len = 0;
-    escape = 0;
-    comment = 0;
-
-    /*
-     * First skip white-space and comments.
-     */
-    for (;;) {
-	c = getc(f);
-	if (c == EOF)
-	    break;
-
-	/*
-	 * A newline means the end of a comment; backslash-newline
-	 * is ignored.  Note that we cannot have escape && comment.
-	 */
-	if (c == '\n') {
-	    if (!escape) {
-		*newlinep = 1;
-		comment = 0;
-	    } else
-		escape = 0;
-	    continue;
-	}
-
-	/*
-	 * Ignore characters other than newline in a comment.
-	 */
-	if (comment)
-	    continue;
-
-	/*
-	 * If this character is escaped, we have a word start.
-	 */
-	if (escape)
-	    break;
-
-	/*
-	 * If this is the escape character, look at the next character.
-	 */
-	if (c == '\\') {
-	    escape = 1;
-	    continue;
-	}
-
-	/*
-	 * If this is the start of a comment, ignore the rest of the line.
-	 */
-	if (c == '#') {
-	    comment = 1;
-	    continue;
-	}
-
-	/*
-	 * A non-whitespace character is the start of a word.
-	 */
-	if (!isspace(c))
-	    break;
-    }
-
-    /*
-     * Save the delimiter for quoted strings.
-     */
-    if (!escape && (c == '"' || c == '\'')) {
-        quoted = c;
-	c = getc(f);
-    } else
-        quoted = 0;
-
-    /*
-     * Process characters until the end of the word.
-     */
-    while (c != EOF) {
-	if (escape) {
-	    /*
-	     * This character is escaped: backslash-newline is ignored,
-	     * various other characters indicate particular values
-	     * as for C backslash-escapes.
-	     */
-	    escape = 0;
-	    if (c == '\n') {
-	        c = getc(f);
-		continue;
-	    }
-
-	    got = 0;
-	    switch (c) {
-	    case 'a':
-		value = '\a';
-		break;
-	    case 'b':
-		value = '\b';
-		break;
-	    case 'f':
-		value = '\f';
-		break;
-	    case 'n':
-		value = '\n';
-		break;
-	    case 'r':
-		value = '\r';
-		break;
-	    case 's':
-		value = ' ';
-		break;
-	    case 't':
-		value = '\t';
-		break;
-
-	    default:
-		if (isoctal(c)) {
-		    /*
-		     * \ddd octal sequence
-		     */
-		    value = 0;
-		    for (n = 0; n < 3 && isoctal(c); ++n) {
-			value = (value << 3) + (c & 07);
-			c = getc(f);
-		    }
-		    got = 1;
-		    break;
-		}
-
-		if (c == 'x') {
-		    /*
-		     * \x<hex_string> sequence
-		     */
-		    value = 0;
-		    c = getc(f);
-		    for (n = 0; n < 2 && isxdigit(c); ++n) {
-			digit = toupper(c) - '0';
-			if (digit > 10)
-			    digit += '0' + 10 - 'A';
-			value = (value << 4) + digit;
-			c = getc (f);
-		    }
-		    got = 1;
-		    break;
-		}
-
-		/*
-		 * Otherwise the character stands for itself.
-		 */
-		value = c;
-		break;
-	    }
-
-	    /*
-	     * Store the resulting character for the escape sequence.
-	     */
-	    if (len < MAXWORDLEN-1)
-		word[len] = value;
-	    ++len;
-
-	    if (!got)
-		c = getc(f);
-	    continue;
-
-	}
-
-	/*
-	 * Not escaped: see if we've reached the end of the word.
-	 */
-	if (quoted) {
-	    if (c == quoted)
-		break;
-	} else {
-	    if (isspace(c) || c == '#') {
-		ungetc (c, f);
-		break;
-	    }
-	}
-
-	/*
-	 * Backslash starts an escape sequence.
-	 */
-	if (c == '\\') {
-	    escape = 1;
-	    c = getc(f);
-	    continue;
-	}
-
-	/*
-	 * An ordinary character: store it in the word and get another.
-	 */
-	if (len < MAXWORDLEN-1)
-	    word[len] = c;
-	++len;
-
-	c = getc(f);
-    }
-
-    /*
-     * End of the word: check for errors.
-     */
-    if (c == EOF) {
-	if (ferror(f)) {
-	    if (errno == 0)
-		errno = EIO;
-	    option_error("Error reading %s: %m", filename);
-	    die(1);
-	}
-	/*
-	 * If len is zero, then we didn't find a word before the
-	 * end of the file.
-	 */
-	if (len == 0)
-	    return 0;
-    }
-
-    /*
-     * Warn if the word was too long, and append a terminating null.
-     */
-    if (len >= MAXWORDLEN) {
-	option_error("warning: word in file %s too long (%.20s...)",
-		     filename, word);
-	len = MAXWORDLEN - 1;
-    }
-    word[len] = 0;
-
-    return 1;
-
-#undef isoctal
-
-}
-
-/*
- * number_option - parse an unsigned numeric parameter for an option.
- */
-static int
-number_option(str, valp, base)
-    char *str;
-    u_int32_t *valp;
-    int base;
-{
-    char *ptr;
-
-    *valp = strtoul(str, &ptr, base);
-    if (ptr == str) {
-	option_error("invalid numeric parameter '%s' for %s option",
-		     str, current_option);
-	return 0;
-    }
-    return 1;
-}
-
-
-/*
- * int_option - like number_option, but valp is int *,
- * the base is assumed to be 0, and *valp is not changed
- * if there is an error.
- */
-int
-int_option(str, valp)
-    char *str;
-    int *valp;
-{
-    u_int32_t v;
-
-    if (!number_option(str, &v, 0))
-	return 0;
-    *valp = (int) v;
-    return 1;
-}
-
-
-/*
- * The following procedures parse options.
- */
-
-/*
- * readfile - take commands from a file.
- */
-static int
-readfile(argv)
-    char **argv;
-{
-    return options_from_file(*argv, 1, 1, privileged_option);
-}
-
-/*
- * callfile - take commands from /etc/ppp/peers/<name>.
- * Name may not contain /../, start with / or ../, or end in /..
- */
-static int
-callfile(argv)
-    char **argv;
-{
-    char *fname, *arg, *p;
-    int l, ok;
-
-    arg = *argv;
-    ok = 1;
-    if (arg[0] == '/' || arg[0] == 0)
-	ok = 0;
-    else {
-	for (p = arg; *p != 0; ) {
-	    if (p[0] == '.' && p[1] == '.' && (p[2] == '/' || p[2] == 0)) {
-		ok = 0;
-		break;
-	    }
-	    while (*p != '/' && *p != 0)
-		++p;
-	    if (*p == '/')
-		++p;
-	}
-    }
-    if (!ok) {
-	option_error("call option value may not contain .. or start with /");
-	return 0;
-    }
-
-    l = strlen(arg) + strlen(_PATH_PEERFILES) + 1;
-    if ((fname = (char *) malloc(l)) == NULL)
-	novm("call file name");
-    slprintf(fname, l, "%s%s", _PATH_PEERFILES, arg);
-
-    ok = options_from_file(fname, 1, 1, 1);
-
-    free(fname);
-    return ok;
-}
-
-#ifdef PPP_FILTER
-/*
- * setpassfilter - Set the pass filter for packets
- */
-static int
-setpassfilter(argv)
-    char **argv;
-{
-    pc.linktype = DLT_PPP;
-    pc.snapshot = PPP_HDRLEN;
- 
-    if (pcap_compile(&pc, &pass_filter, *argv, 1, netmask) == 0)
-	return 1;
-    option_error("error in pass-filter expression: %s\n", pcap_geterr(&pc));
-    return 0;
-}
-
-/*
- * setactivefilter - Set the active filter for packets
- */
-static int
-setactivefilter(argv)
-    char **argv;
-{
-    pc.linktype = DLT_PPP;
-    pc.snapshot = PPP_HDRLEN;
- 
-    if (pcap_compile(&pc, &active_filter, *argv, 1, netmask) == 0)
-	return 1;
-    option_error("error in active-filter expression: %s\n", pcap_geterr(&pc));
-    return 0;
-}
-#endif
-
-/*
- * setdomain - Set domain name to append to hostname 
- */
-static int
-setdomain(argv)
-    char **argv;
-{
-    gethostname(hostname, MAXNAMELEN);
-    if (**argv != 0) {
-	if (**argv != '.')
-	    strncat(hostname, ".", MAXNAMELEN - strlen(hostname));
-	domain = hostname + strlen(hostname);
-	strncat(hostname, *argv, MAXNAMELEN - strlen(hostname));
-    }
-    hostname[MAXNAMELEN-1] = 0;
-    return (1);
-}
-
-
-static int
-setlogfile(argv)
-    char **argv;
-{
-    int fd, err;
-
-    if (!privileged_option)
-	seteuid(getuid());
-    fd = open(*argv, O_WRONLY | O_APPEND | O_CREAT | O_EXCL, 0644);
-    if (fd < 0 && errno == EEXIST)
-	fd = open(*argv, O_WRONLY | O_APPEND);
-    err = errno;
-    if (!privileged_option)
-	seteuid(0);
-    if (fd < 0) {
-	errno = err;
-	option_error("Can't open log file %s: %m", *argv);
-	return 0;
-    }
-    strlcpy(logfile_name, *argv, sizeof(logfile_name));
-    if (logfile_fd >= 0)
-	close(logfile_fd);
-    logfile_fd = fd;
-    log_to_fd = fd;
-    log_default = 0;
-    return 1;
-}
-
-#ifdef PLUGIN
-static int
-loadplugin(argv)
-    char **argv;
-{
-    char *arg = *argv;
-    void *handle;
-    const char *err;
-    void (*init) __P((void));
-    char *path = arg;
-    const char *vers;
-
-    if (strchr(arg, '/') == 0) {
-	const char *base = _PATH_PLUGIN;
-	int l = strlen(base) + strlen(arg) + 2;
-	path = malloc(l);
-	if (path == 0)
-	    novm("plugin file path");
-	strlcpy(path, base, l);
-	strlcat(path, "/", l);
-	strlcat(path, arg, l);
-    }
-    handle = dlopen(path, RTLD_GLOBAL | RTLD_NOW);
-    if (handle == 0) {
-	err = dlerror();
-	if (err != 0)
-	    option_error("%s", err);
-	option_error("Couldn't load plugin %s", arg);
-	goto err;
-    }
-    init = (void (*)(void))dlsym(handle, "plugin_init");
-    if (init == 0) {
-	option_error("%s has no initialization entry point", arg);
-	goto errclose;
-    }
-    vers = (const char *) dlsym(handle, "pppd_version");
-    if (vers == 0) {
-	warn("Warning: plugin %s has no version information", arg);
-    } else if (strcmp(vers, VERSION) != 0) {
-	option_error("Plugin %s is for pppd version %s, this is %s",
-		     vers, VERSION);
-	goto errclose;
-    }
-    info("Plugin %s loaded.", arg);
-    (*init)();
-    return 1;
-
- errclose:
-    dlclose(handle);
- err:
-    if (path != arg)
-	free(path);
-    return 0;
-}
-#endif /* PLUGIN */
diff --git a/mdk-stage1/ppp/pppd/patchlevel.h b/mdk-stage1/ppp/pppd/patchlevel.h
deleted file mode 100644
index 2a2d816f1..000000000
--- a/mdk-stage1/ppp/pppd/patchlevel.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $Id$ */
-
-#define VERSION		"2.4.1"
-#define DATE		"25 March 2001"
diff --git a/mdk-stage1/ppp/pppd/pathnames.h b/mdk-stage1/ppp/pppd/pathnames.h
deleted file mode 100644
index e80784567..000000000
--- a/mdk-stage1/ppp/pppd/pathnames.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * define path names
- *
- * $Id$
- */
-
-#define _PATH_VARRUN 	"/var/run/"
-#define _PATH_DEVNULL	"/dev/null"
-#define _ROOT_PATH
-
-#define _PATH_UPAPFILE 	 _ROOT_PATH "/etc/ppp/pap-secrets"
-#define _PATH_CHAPFILE 	 _ROOT_PATH "/etc/ppp/chap-secrets"
-#define _PATH_SYSOPTIONS _ROOT_PATH "/etc/ppp/options"
-#define _PATH_IPUP	 _ROOT_PATH "/etc/ppp/ip-up"
-#define _PATH_IPDOWN	 _ROOT_PATH "/etc/ppp/ip-down"
-#define _PATH_AUTHUP	 _ROOT_PATH "/etc/ppp/auth-up"
-#define _PATH_AUTHDOWN	 _ROOT_PATH "/etc/ppp/auth-down"
-#define _PATH_TTYOPT	 _ROOT_PATH "/etc/ppp/options."
-#define _PATH_CONNERRS	 _ROOT_PATH "/etc/ppp/connect-errors"
-#define _PATH_PEERFILES	 _ROOT_PATH "/etc/ppp/peers/"
-#define _PATH_RESOLV	 _ROOT_PATH "/etc/resolv.conf"
-
-#define _PATH_USEROPT	 ".ppprc"
-
-#define _PATH_PPPDB	_ROOT_PATH _PATH_VARRUN "pppd.tdb"
diff --git a/mdk-stage1/ppp/pppd/plugins/Makefile.linux b/mdk-stage1/ppp/pppd/plugins/Makefile.linux
deleted file mode 100644
index a64256461..000000000
--- a/mdk-stage1/ppp/pppd/plugins/Makefile.linux
+++ /dev/null
@@ -1,19 +0,0 @@
-CC	= gcc
-CFLAGS	= -g -O2 -I.. -I../../include -fPIC
-LDFLAGS	= -shared
-INSTALL	= install
-
-all:	minconn.so passprompt.so
-
-minconn.so: minconn.c
-	$(CC) -o $@ $(LDFLAGS) $(CFLAGS) minconn.c
-
-passprompt.so: passprompt.c
-	$(CC) -o $@ $(LDFLAGS) $(CFLAGS) passprompt.c
-
-LIBDIR	= /usr/lib/pppd
-
-install: minconn.so passprompt.so
-	version=`awk -F '"' '/VERSION/ { print $$2; }' ../patchlevel.h`; \
-	$(INSTALL) -d $(LIBDIR)/$$version; \
-	$(INSTALL) $? $(LIBDIR)/$$version
\ No newline at end of file
diff --git a/mdk-stage1/ppp/pppd/plugins/Makefile.sol2 b/mdk-stage1/ppp/pppd/plugins/Makefile.sol2
deleted file mode 100644
index 8f4398258..000000000
--- a/mdk-stage1/ppp/pppd/plugins/Makefile.sol2
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Makefile for plugins on Solaris 2
-#
-# $Id$
-#
-
-include ../../svr4/Makedefs
-
-CFLAGS	= -c -O -I.. -I../../include $(COPTS)
-LDFLAGS	= -G 
-
-all:	minconn.so
-
-minconn.so: minconn.o
-	ld -o $@ $(LDFLAGS) -h $@ minconn.o
-
-minconn.o: minconn.c
-	$(CC) $(CFLAGS) -c $? 
-
-passprompt.so: passprompt.o
-	ld -o $@ $(LDFLAGS) -h $@ passprompt.o
-
-passprompt.o: passprompt.c
-	$(CC) $(CFLAGS) -c $?
-
-clean:
-	rm -f *.o *.so
diff --git a/mdk-stage1/ppp/pppd/plugins/minconn.c b/mdk-stage1/ppp/pppd/plugins/minconn.c
deleted file mode 100644
index 02ea34bf6..000000000
--- a/mdk-stage1/ppp/pppd/plugins/minconn.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * minconn.c - pppd plugin to implement a `minconnect' option.
- *
- * Copyright 1999 Paul Mackerras.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms.  The name of the author
- * may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stddef.h>
-#include <time.h>
-#include "pppd.h"
-
-char pppd_version[] = VERSION;
-
-static int minconnect = 0;
-
-static option_t my_options[] = {
-	{ "minconnect", o_int, &minconnect,
-	  "Set minimum connect time before idle timeout applies" },
-	{ NULL }
-};
-
-static int my_get_idle(struct ppp_idle *idle)
-{
-	time_t t;
-
-	if (idle == NULL)
-		return minconnect? minconnect: idle_time_limit;
-	t = idle->xmit_idle;
-	if (idle->recv_idle < t)
-		t = idle->recv_idle;
-	return idle_time_limit - t;
-}
-
-void plugin_init(void)
-{
-	info("plugin_init");
-	add_options(my_options);
-	idle_time_hook = my_get_idle;
-}
diff --git a/mdk-stage1/ppp/pppd/plugins/passprompt.c b/mdk-stage1/ppp/pppd/plugins/passprompt.c
deleted file mode 100644
index 5e6a7f90b..000000000
--- a/mdk-stage1/ppp/pppd/plugins/passprompt.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * passprompt.c - pppd plugin to invoke an external PAP password prompter
- *
- * Copyright 1999 Paul Mackerras, Alan Curry.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-#include <errno.h>
-#include <unistd.h>
-#include <sys/wait.h>
-#include <syslog.h>
-#include "pppd.h"
-
-char pppd_version[] = VERSION;
-
-static char promptprog[PATH_MAX+1];
-
-static option_t options[] = {
-    { "promptprog", o_string, promptprog,
-      "External PAP password prompting program",
-      OPT_STATIC, NULL, PATH_MAX },
-    { NULL }
-};
-
-static int promptpass(char *user, char *passwd)
-{
-    int p[2];
-    pid_t kid;
-    int readgood, wstat;
-    size_t red;
-
-    if (promptprog[0] == 0 || access(promptprog, X_OK) < 0)
-	return -1;	/* sorry, can't help */
-
-    if (!passwd)
-	return 1;
-
-    if (pipe(p)) {
-	warn("Can't make a pipe for %s", promptprog);
-	return 0;
-    }
-    if ((kid = fork()) == (pid_t) -1) {
-	warn("Can't fork to run %s", promptprog);
-	close(p[0]);
-	close(p[1]);
-	return 0;
-    }
-    if (!kid) {
-	/* we are the child, exec the program */
-	char *argv[4], fdstr[32];
-	sys_close();
-	closelog();
-	close(p[0]);
-	seteuid(getuid());
-	setegid(getgid());
-	argv[0] = promptprog;
-	argv[1] = user;
-	argv[2] = remote_name;
-	sprintf(fdstr, "%d", p[1]);
-	argv[3] = fdstr;
-	argv[4] = 0;
-	execv(*argv, argv);
-	_exit(127);
-    }
-
-    /* we are the parent, read the password from the pipe */
-    close(p[1]);
-    readgood = 0;
-    do {
-	red = read(p[0], passwd + readgood, MAXSECRETLEN-1 - readgood);
-	if (red == 0)
-	    break;
-	if (red < 0) {
-	    error("Can't read secret from %s: %m", promptprog);
-	    readgood = -1;
-	    break;
-	}
-	readgood += red;
-    } while (readgood < MAXSECRETLEN - 1);
-    passwd[readgood] = 0;
-    close(p[0]);
-
-    /* now wait for child to exit */
-    while (waitpid(kid, &wstat, 0) < 0) {
-	if (errno != EINTR) {
-	    warn("error waiting for %s: %m", promptprog);
-	    break;
-	}
-    }
-
-    if (readgood < 0)
-	return 0;
-    if (!WIFEXITED(wstat))
-	warn("%s terminated abnormally", promptprog);
-    if (WEXITSTATUS(wstat))
-	warn("%s exited with code %d", promptprog, WEXITSTATUS(status));
-
-    return 1;
-}
-
-void plugin_init(void)
-{
-    add_options(options);
-    pap_passwd_hook = promptpass;
-}
diff --git a/mdk-stage1/ppp/pppd/ppp.pam b/mdk-stage1/ppp/pppd/ppp.pam
deleted file mode 100644
index 475a4bc88..000000000
--- a/mdk-stage1/ppp/pppd/ppp.pam
+++ /dev/null
@@ -1,6 +0,0 @@
-#%PAM-1.0
-# Information for the PPPD process with the 'login' option.
-auth	required	pam_nologin.so
-auth	required	pam_unix.so
-account	required	pam_unix.so
-session	required	pam_unix.so
\ No newline at end of file
diff --git a/mdk-stage1/ppp/pppd/pppd.8 b/mdk-stage1/ppp/pppd/pppd.8
deleted file mode 100644
index ab091cd83..000000000
--- a/mdk-stage1/ppp/pppd/pppd.8
+++ /dev/null
@@ -1,1591 +0,0 @@
-.\" manual page [] for pppd 2.4
-.\" $Id$
-.\" SH section heading
-.\" SS subsection heading
-.\" LP paragraph
-.\" IP indented paragraph
-.\" TP hanging label
-.TH PPPD 8
-.SH NAME
-pppd \- Point to Point Protocol daemon
-.SH SYNOPSIS
-.B pppd
-[
-.I tty_name
-] [
-.I speed
-] [
-.I options
-]
-.SH DESCRIPTION
-.LP
-The Point-to-Point Protocol (PPP) provides a method for transmitting
-datagrams over serial point-to-point links.  PPP
-is composed of three parts: a method for encapsulating datagrams over
-serial links, an extensible Link Control Protocol (LCP), and
-a family of Network Control Protocols (NCP) for establishing
-and configuring different network-layer protocols.
-.LP
-The encapsulation scheme is provided by driver code in the kernel.
-Pppd provides the basic LCP, authentication support, and an NCP for
-establishing and configuring the Internet Protocol (IP) (called the IP
-Control Protocol, IPCP).
-.SH FREQUENTLY USED OPTIONS
-.TP
-.I <tty_name>
-Communicate over the named device.  The string "/dev/" is prepended if
-necessary.  If no device name is given, or if the name of the terminal
-connected to the standard input is given, pppd will use that terminal,
-and will not fork to put itself in the background.  A value for this
-option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.I <speed>
-Set the baud rate to <speed> (a decimal number).  On systems such as
-4.4BSD and NetBSD, any speed can be specified.  Other systems
-(e.g. SunOS) allow only a limited set of speeds.
-.TP
-.B asyncmap \fI<map>
-Set the async character map to <map>.  This map describes which
-control characters cannot be successfully received over the serial
-line.  Pppd will ask the peer to send these characters as a 2-byte
-escape sequence.  The argument is a 32 bit hex number with each bit
-representing a character to escape.  Bit 0 (00000001) represents the
-character 0x00; bit 31 (80000000) represents the character 0x1f or ^_.
-If multiple \fIasyncmap\fR options are given, the values are ORed
-together.  If no \fIasyncmap\fR option is given, no async character
-map will be negotiated for the receive direction; the peer should then
-escape \fIall\fR control characters.  To escape transmitted
-characters, use the \fIescape\fR option.
-.TP
-.B auth
-Require the peer to authenticate itself before allowing network
-packets to be sent or received.  This option is the default if the
-system has a default route.  If neither this option nor the
-\fInoauth\fR option is specified, pppd will only allow the peer to use
-IP addresses to which the system does not already have a route.
-.TP
-.B call \fIname
-Read options from the file /etc/ppp/peers/\fIname\fR.  This file may
-contain privileged options, such as \fInoauth\fR, even if pppd
-is not being run by root.  The \fIname\fR string may not begin with /
-or include .. as a pathname component.  The format of the options file
-is described below.
-.TP
-.B connect \fIscript
-Use the executable or shell command specified by \fIscript\fR to set
-up the serial line.  This script would typically use the chat(8)
-program to dial the modem and start the remote ppp session.  A value
-for this option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.B crtscts
-Use hardware flow control (i.e. RTS/CTS) to control the flow of
-data on the serial port.  If neither the \fIcrtscts\fR, the
-\fInocrtscts\fR, the \fIcdtrcts\fR nor the \fInocdtrcts\fR option
-is given, the hardware flow control setting for the serial port is
-left unchanged.
-Some serial ports (such as Macintosh serial ports) lack a true
-RTS output. Such serial ports use this mode to implement
-unidirectional flow control. The serial port will
-suspend transmission when requested by the modem (via CTS)
-but will be unable to request the modem stop sending to the
-computer. This mode retains the ability to use DTR as
-a modem control line.
-.TP
-.B defaultroute
-Add a default route to the system routing tables, using the peer as
-the gateway, when IPCP negotiation is successfully completed.
-This entry is removed when the PPP connection is broken.  This option
-is privileged if the \fInodefaultroute\fR option has been specified.
-.TP
-.B disconnect \fIscript
-Run the executable or shell command specified by \fIscript\fR after
-pppd has terminated the link.  This script could, for example, issue
-commands to the modem to cause it to hang up if hardware modem control
-signals were not available.  The disconnect script is not run if the
-modem has already hung up.  A value for this option from a privileged
-source cannot be overridden by a non-privileged user.
-.TP
-.B escape \fIxx,yy,...
-Specifies that certain characters should be escaped on transmission
-(regardless of whether the peer requests them to be escaped with its
-async control character map).  The characters to be escaped are
-specified as a list of hex numbers separated by commas.  Note that
-almost any character can be specified for the \fIescape\fR option,
-unlike the \fIasyncmap\fR option which only allows control characters
-to be specified.  The characters which may not be escaped are those
-with hex values 0x20 - 0x3f or 0x5e.
-.TP
-.B file \fIname
-Read options from file \fIname\fR (the format is described below).
-The file must be readable by the user who has invoked pppd.
-.TP
-.B init \fIscript
-Run the executable or shell command specified by \fIscript\fR to
-initialize the serial line.  This script would typically use the
-chat(8) program to configure the modem to enable auto answer.  A value
-for this option from a privileged source cannot be overridden by a
-non-privileged user.
-.TP
-.B lock
-Specifies that pppd should create a UUCP-style lock file for the
-serial device to ensure exclusive access to the device.
-.TP
-.B mru \fIn
-Set the MRU [Maximum Receive Unit] value to \fIn\fR. Pppd
-will ask the peer to send packets of no more than \fIn\fR bytes.  The
-minimum MRU value is 128.  The default MRU value is 1500.  A value of
-296 is recommended for slow links (40 bytes for TCP/IP header + 256
-bytes of data).  (Note that for IPv6 MRU must be at least 1280)
-.TP
-.B mtu \fIn
-Set the MTU [Maximum Transmit Unit] value to \fIn\fR.  Unless the
-peer requests a smaller value via MRU negotiation, pppd will
-request that the kernel networking code send data packets of no more
-than \fIn\fR bytes through the PPP network interface.  (Note that for 
-IPv6 MTU must be at least 1280)
-.TP
-.B passive
-Enables the "passive" option in the LCP.  With this option, pppd will
-attempt to initiate a connection; if no reply is received from the
-peer, pppd will then just wait passively for a valid LCP packet from
-the peer, instead of exiting, as it would without this option.
-.SH OPTIONS
-.TP
-.I <local_IP_address>\fB:\fI<remote_IP_address>
-Set the local and/or remote interface IP addresses.  Either one may be
-omitted.  The IP addresses can be specified with a host name or in
-decimal dot notation (e.g. 150.234.56.78).  The default local
-address is the (first) IP address of the system (unless the
-\fInoipdefault\fR
-option is given).  The remote address will be obtained from the peer
-if not specified in any option.  Thus, in simple cases, this option is
-not required.  If a local and/or remote IP address is specified with
-this option, pppd
-will not accept a different value from the peer in the IPCP
-negotiation, unless the \fIipcp-accept-local\fR and/or
-\fIipcp-accept-remote\fR options are given, respectively.
-.TP
-.B ipv6 \fI<local_interface_identifier>\fR,\fI<remote_interface_identifier>
-Set the local and/or remote 64-bit interface identifier. Either one may be
-omitted. The identifier must be specified in standard ascii notation of
-IPv6 addresses (e.g. ::dead:beef). If the
-\fIipv6cp-use-ipaddr\fR
-option is given, the local identifier is the local IPv4 address (see above).
-On systems which supports a unique persistent id, such as EUI-48 derived
-from the Ethernet MAC address, \fIipv6cp-use-persistent\fR option can be
-used to replace the \fIipv6 <local>,<remote>\fR option. Otherwise the 
-identifier is randomized.
-.TP
-.B active-filter \fIfilter-expression
-Specifies a packet filter to be applied to data packets to determine
-which packets are to be regarded as link activity, and therefore reset
-the idle timer, or cause the link to be brought up in demand-dialling
-mode.  This option is useful in conjunction with the
-\fBidle\fR option if there are packets being sent or received
-regularly over the link (for example, routing information packets)
-which would otherwise prevent the link from ever appearing to be idle.
-The \fIfilter-expression\fR syntax is as described for tcpdump(1),
-except that qualifiers which are inappropriate for a PPP link, such as
-\fBether\fR and \fBarp\fR, are not permitted.  Generally the filter
-expression should be enclosed in single-quotes to prevent whitespace
-in the expression from being interpreted by the shell. This option
-is currently only available under NetBSD, and then only
-if both the kernel and pppd were compiled with PPP_FILTER defined.
-.TP
-.B allow-ip \fIaddress(es)
-Allow peers to use the given IP address or subnet without
-authenticating themselves.  The parameter is parsed as for each
-element of the list of allowed IP addresses in the secrets files (see
-the AUTHENTICATION section below).
-.TP
-.B bsdcomp \fInr,nt
-Request that the peer compress packets that it sends, using the
-BSD-Compress scheme, with a maximum code size of \fInr\fR bits, and
-agree to compress packets sent to the peer with a maximum code size of
-\fInt\fR bits.  If \fInt\fR is not specified, it defaults to the value
-given for \fInr\fR.  Values in the range 9 to 15 may be used for
-\fInr\fR and \fInt\fR; larger values give better compression but
-consume more kernel memory for compression dictionaries.
-Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
-compression in the corresponding direction.  Use \fInobsdcomp\fR or
-\fIbsdcomp 0\fR to disable BSD-Compress compression entirely.
-.TP
-.B cdtrcts
-Use a non-standard hardware flow control (i.e. DTR/CTS) to control
-the flow of data on the serial port.  If neither the \fIcrtscts\fR,
-the \fInocrtscts\fR, the \fIcdtrcts\fR nor the \fInocdtrcts\fR
-option is given, the hardware flow control setting for the serial
-port is left unchanged.
-Some serial ports (such as Macintosh serial ports) lack a true
-RTS output. Such serial ports use this mode to implement true
-bi-directional flow control. The sacrifice is that this flow
-control mode does not permit using DTR as a modem control line.
-.TP
-.B chap-interval \fIn
-If this option is given, pppd will rechallenge the peer every \fIn\fR
-seconds.
-.TP
-.B chap-max-challenge \fIn
-Set the maximum number of CHAP challenge transmissions to \fIn\fR
-(default 10).
-.TP
-.B chap-restart \fIn
-Set the CHAP restart interval (retransmission timeout for challenges)
-to \fIn\fR seconds (default 3).
-.TP
-.B connect-delay \fIn
-Wait for up \fIn\fR milliseconds after the connect script finishes for
-a valid PPP packet from the peer.  At the end of this time, or when a
-valid PPP packet is received from the peer, pppd will commence
-negotiation by sending its first LCP packet.  The default value is
-1000 (1 second).  This wait period only applies if the \fBconnect\fR
-or \fBpty\fR option is used.
-.TP
-.B debug
-Enables connection debugging facilities.
-If this option is given, pppd will log the contents of all
-control packets sent or received in a readable form.  The packets are
-logged through syslog with facility \fIdaemon\fR and level
-\fIdebug\fR.  This information can be directed to a file by setting up
-/etc/syslog.conf appropriately (see syslog.conf(5)).
-.TP
-.B default-asyncmap
-Disable asyncmap negotiation, forcing all control characters to be
-escaped for both the transmit and the receive direction.
-.TP
-.B default-mru
-Disable MRU [Maximum Receive Unit] negotiation.  With this option,
-pppd will use the default MRU value of 1500 bytes for both the
-transmit and receive direction.
-.TP
-.B deflate \fInr,nt
-Request that the peer compress packets that it sends, using the
-Deflate scheme, with a maximum window size of \fI2**nr\fR bytes, and
-agree to compress packets sent to the peer with a maximum window size
-of \fI2**nt\fR bytes.  If \fInt\fR is not specified, it defaults to
-the value given for \fInr\fR.  Values in the range 9 to 15 may be used
-for \fInr\fR and \fInt\fR; larger values give better compression but
-consume more kernel memory for compression dictionaries.
-Alternatively, a value of 0 for \fInr\fR or \fInt\fR disables
-compression in the corresponding direction.  Use \fInodeflate\fR or
-\fIdeflate 0\fR to disable Deflate compression entirely.  (Note: pppd
-requests Deflate compression in preference to BSD-Compress if the peer
-can do either.)
-.TP
-.B demand
-Initiate the link only on demand, i.e. when data traffic is present.
-With this option, the remote IP address must be specified by the user
-on the command line or in an options file.  Pppd will initially
-configure the interface and enable it for IP traffic without
-connecting to the peer.  When traffic is available, pppd will
-connect to the peer and perform negotiation, authentication, etc.
-When this is completed, pppd will commence passing data packets
-(i.e., IP packets) across the link.
-
-The \fIdemand\fR option implies the \fIpersist\fR option.  If this
-behaviour is not desired, use the \fInopersist\fR option after the
-\fIdemand\fR option.  The \fIidle\fR and \fIholdoff\fR
-options are also useful in conjuction with the \fIdemand\fR option.
-.TP
-.B domain \fId
-Append the domain name \fId\fR to the local host name for authentication
-purposes.  For example, if gethostname() returns the name porsche, but
-the fully qualified domain name is porsche.Quotron.COM, you could
-specify \fIdomain Quotron.COM\fR.  Pppd would then use the name
-\fIporsche.Quotron.COM\fR for looking up secrets in the secrets file,
-and as the default name to send to the peer when authenticating itself
-to the peer.  This option is privileged.
-.TP
-.B dryrun
-With the \fBdryrun\fR option, pppd will print out all the option
-values which have been set and then exit, after parsing the command
-line and options files and checking the option values, but before
-initiating the link.  The option values are logged at level info, and
-also printed to standard output unless the device on standard output
-is the device that pppd would be using to communicate with the peer.
-.TP
-.B dump
-With the \fBdump\fR option, pppd will print out all the option values
-which have been set.  This option is like the \fBdryrun\fR option
-except that pppd proceeds as normal rather than exiting.
-.TP
-.B endpoint \fI<epdisc>
-Sets the endpoint discriminator sent by the local machine to the peer
-during multilink negotiation to \fI<epdisc>\fR.  The default is to use
-the MAC address of the first ethernet interface on the system, if any,
-otherwise the IPv4 address corresponding to the hostname, if any,
-provided it is not in the multicast or locally-assigned IP address
-ranges, or the localhost address.  The endpoint discriminator can be
-the string \fBnull\fR or of the form \fItype\fR:\fIvalue\fR, where
-type is a decimal number or one of the strings \fBlocal\fR, \fBIP\fR,
-\fBMAC\fR, \fBmagic\fR, or \fBphone\fR.  The value is an IP address in
-dotted-decimal notation for the \fBIP\fR type, or a string of bytes in
-hexadecimal, separated by periods or colons for the other types.  For
-the MAC type, the value may also be the name of an ethernet or similar
-network interface.  This option is currently only available under
-Linux.
-.TP
-.B hide-password
-When logging the contents of PAP packets, this option causes pppd to
-exclude the password string from the log.  This is the default.
-.TP
-.B holdoff \fIn
-Specifies how many seconds to wait before re-initiating the link after
-it terminates.  This option only has any effect if the \fIpersist\fR
-or \fIdemand\fR option is used.  The holdoff period is not applied if
-the link was terminated because it was idle.
-.TP
-.B idle \fIn
-Specifies that pppd should disconnect if the link is idle for \fIn\fR
-seconds.  The link is idle when no data packets (i.e. IP packets) are
-being sent or received.  Note: it is not advisable to use this option
-with the \fIpersist\fR option without the \fIdemand\fR option.
-If the \fBactive-filter\fR
-option is given, data packets which are rejected by the specified
-activity filter also count as the link being idle.
-.TP
-.B ipcp-accept-local
-With this option, pppd will accept the peer's idea of our local IP
-address, even if the local IP address was specified in an option.
-.TP
-.B ipcp-accept-remote
-With this option, pppd will accept the peer's idea of its (remote) IP
-address, even if the remote IP address was specified in an option.
-.TP
-.B ipcp-max-configure \fIn
-Set the maximum number of IPCP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B ipcp-max-failure \fIn
-Set the maximum number of IPCP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B ipcp-max-terminate \fIn
-Set the maximum number of IPCP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B ipcp-restart \fIn
-Set the IPCP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B ipparam \fIstring
-Provides an extra parameter to the ip-up and ip-down scripts.  If this
-option is given, the \fIstring\fR supplied is given as the 6th
-parameter to those scripts.
-.TP
-.B ipv6cp-max-configure \fIn
-Set the maximum number of IPv6CP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B ipv6cp-max-failure \fIn
-Set the maximum number of IPv6CP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B ipv6cp-max-terminate \fIn
-Set the maximum number of IPv6CP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B ipv6cp-restart \fIn
-Set the IPv6CP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B ipx
-Enable the IPXCP and IPX protocols.  This option is presently only
-supported under Linux, and only if your kernel has been configured to
-include IPX support.
-.TP
-.B ipx-network \fIn
-Set the IPX network number in the IPXCP configure request frame to
-\fIn\fR, a hexadecimal number (without a leading 0x).  There is no
-valid default.  If this option is not specified, the network number is
-obtained from the peer.  If the peer does not have the network number,
-the IPX protocol will not be started.
-.TP
-.B ipx-node \fIn\fB:\fIm
-Set the IPX node numbers. The two node numbers are separated from each
-other with a colon character. The first number \fIn\fR is the local
-node number. The second number \fIm\fR is the peer's node number. Each
-node number is a hexadecimal number, at most 10 digits long. The node
-numbers on the ipx-network must be unique. There is no valid
-default. If this option is not specified then the node numbers are
-obtained from the peer.
-.TP
-.B ipx-router-name \fI<string>
-Set the name of the router. This is a string and is sent to the peer
-as information data.
-.TP
-.B ipx-routing \fIn
-Set the routing protocol to be received by this option. More than one
-instance of \fIipx-routing\fR may be specified. The '\fInone\fR'
-option (0) may be specified as the only instance of ipx-routing. The
-values may be \fI0\fR for \fINONE\fR, \fI2\fR for \fIRIP/SAP\fR, and
-\fI4\fR for \fINLSP\fR.
-.TP
-.B ipxcp-accept-local
-Accept the peer's NAK for the node number specified in the ipx-node
-option. If a node number was specified, and non-zero, the default is
-to insist that the value be used. If you include this option then you
-will permit the peer to override the entry of the node number.
-.TP
-.B ipxcp-accept-network
-Accept the peer's NAK for the network number specified in the
-ipx-network option. If a network number was specified, and non-zero, the
-default is to insist that the value be used. If you include this
-option then you will permit the peer to override the entry of the node
-number.
-.TP
-.B ipxcp-accept-remote
-Use the peer's network number specified in the configure request
-frame. If a node number was specified for the peer and this option was
-not specified, the peer will be forced to use the value which you have
-specified.
-.TP
-.B ipxcp-max-configure \fIn
-Set the maximum number of IPXCP configure request frames which the
-system will send to \fIn\fR. The default is 10.
-.TP
-.B ipxcp-max-failure \fIn
-Set the maximum number of IPXCP NAK frames which the local system will
-send before it rejects the options. The default value is 3.
-.TP
-.B ipxcp-max-terminate \fIn
-Set the maximum nuber of IPXCP terminate request frames before the
-local system considers that the peer is not listening to them. The
-default value is 3.
-.TP
-.B kdebug \fIn
-Enable debugging code in the kernel-level PPP driver.  The argument
-values depend on the specific kernel driver, but in general a value of
-1 will enable general kernel debug messages.  (Note that these
-messages are usually only useful for debugging the kernel driver
-itself.)  For the Linux 2.2.x kernel driver, the value is a sum of
-bits: 1 to
-enable general debug messages, 2 to request that the contents of
-received packets be printed, and 4 to request that the contents of
-transmitted packets be printed.  On most systems, messages printed by
-the kernel are logged by syslog(1) to a file as directed in the
-/etc/syslog.conf configuration file.
-.TP
-.B ktune
-Enables pppd to alter kernel settings as appropriate.  Under Linux,
-pppd will enable IP forwarding (i.e. set /proc/sys/net/ipv4/ip_forward
-to 1) if the \fIproxyarp\fR option is used, and will enable the
-dynamic IP address option (i.e. set /proc/sys/net/ipv4/ip_dynaddr to
-1) in demand mode if the local address changes.
-.TP
-.B lcp-echo-failure \fIn
-If this option is given, pppd will presume the peer to be dead
-if \fIn\fR LCP echo-requests are sent without receiving a valid LCP
-echo-reply.  If this happens, pppd will terminate the
-connection.  Use of this option requires a non-zero value for the
-\fIlcp-echo-interval\fR parameter.  This option can be used to enable
-pppd to terminate after the physical connection has been broken
-(e.g., the modem has hung up) in situations where no hardware modem
-control lines are available.
-.TP
-.B lcp-echo-interval \fIn
-If this option is given, pppd will send an LCP echo-request frame to
-the peer every \fIn\fR seconds.  Normally the peer should respond to
-the echo-request by sending an echo-reply.  This option can be used
-with the \fIlcp-echo-failure\fR option to detect that the peer is no
-longer connected.
-.TP
-.B lcp-max-configure \fIn
-Set the maximum number of LCP configure-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B lcp-max-failure \fIn
-Set the maximum number of LCP configure-NAKs returned before starting
-to send configure-Rejects instead to \fIn\fR (default 10).
-.TP
-.B lcp-max-terminate \fIn
-Set the maximum number of LCP terminate-request transmissions to
-\fIn\fR (default 3).
-.TP
-.B lcp-restart \fIn
-Set the LCP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B linkname \fIname\fR
-Sets the logical name of the link to \fIname\fR.  Pppd will create a
-file named \fBppp-\fIname\fB.pid\fR in /var/run (or /etc/ppp on some
-systems) containing its process ID.  This can be useful in determining
-which instance of pppd is responsible for the link to a given peer
-system.  This is a privileged option.
-.TP
-.B local
-Don't use the modem control lines.  With this option, pppd will ignore
-the state of the CD (Carrier Detect) signal from the modem and will
-not change the state of the DTR (Data Terminal Ready) signal.
-.TP
-.B logfd \fIn
-Send log messages to file descriptor \fIn\fR.  Pppd will send log
-messages to at most one file or file descriptor (as well as sending
-the log messages to syslog), so this option and the \fBlogfile\fR
-option are mutually exclusive.  The default is for pppd to send log
-messages to stdout (file descriptor 1), unless the serial port is
-already open on stdout.
-.TP
-.B logfile \fIfilename
-Append log messages to the file \fIfilename\fR (as well as sending the
-log messages to syslog).  The file is opened with the privileges of
-the user who invoked pppd, in append mode.
-.TP
-.B login
-Use the system password database for authenticating the peer using
-PAP, and record the user in the system wtmp file.  Note that the peer
-must have an entry in the /etc/ppp/pap-secrets file as well as the
-system password database to be allowed access.
-.TP
-.B maxconnect \fIn
-Terminate the connection when it has been available for network
-traffic for \fIn\fR seconds (i.e. \fIn\fR seconds after the first
-network control protocol comes up).
-.TP
-.B maxfail \fIn
-Terminate after \fIn\fR consecutive failed connection attempts.  A
-value of 0 means no limit.  The default value is 10.
-.TP
-.B modem
-Use the modem control lines.  This option is the default.  With this
-option, pppd will wait for the CD (Carrier Detect) signal from the
-modem to be asserted when opening the serial device (unless a connect
-script is specified), and it will drop the DTR (Data Terminal Ready)
-signal briefly when the connection is terminated and before executing
-the connect script.  On Ultrix, this option implies hardware flow
-control, as for the \fIcrtscts\fR option.
-.TP
-.B mp
-Enables the use of PPP multilink; this is an alias for the `multilink'
-option.  This option is currently only available under Linux.
-.TP
-.B mpshortseq
-Enables the use of short (12-bit) sequence numbers in multilink
-headers, as opposed to 24-bit sequence numbers.  This option is only
-available under Linux, and only has any effect if multilink is
-enabled (see the multilink option).
-.TP
-.B mrru \fIn
-Sets the Maximum Reconstructed Receive Unit to \fIn\fR.  The MRRU is
-the maximum size for a received packet on a multilink bundle, and is
-analogous to the MRU for the individual links.  This option is
-currently only available under Linux, and only has any effect if
-multilink is enabled (see the multilink option).
-.TP
-.B ms-dns \fI<addr>
-If pppd is acting as a server for Microsoft Windows clients, this
-option allows pppd to supply one or two DNS (Domain Name Server)
-addresses to the clients.  The first instance of this option specifies
-the primary DNS address; the second instance (if given) specifies the
-secondary DNS address.  (This option was present in some older
-versions of pppd under the name \fBdns-addr\fR.)
-.TP
-.B ms-wins \fI<addr>
-If pppd is acting as a server for Microsoft Windows or "Samba"
-clients, this option allows pppd to supply one or two WINS (Windows
-Internet Name Services) server addresses to the clients.  The first
-instance of this option specifies the primary WINS address; the second
-instance (if given) specifies the secondary WINS address.
-.TP
-.B multilink
-Enables the use of the PPP multilink protocol.  If the peer also
-supports multilink, then this link can become part of a bundle between
-the local system and the peer.  If there is an existing bundle to the
-peer, pppd will join this link to that bundle, otherwise pppd will
-create a new bundle.  See the MULTILINK section below.  This option is
-currently only available under Linux.
-.TP
-.B name \fIname
-Set the name of the local system for authentication purposes to
-\fIname\fR.  This is a privileged option.  With this option, pppd will
-use lines in the secrets files which have \fIname\fR as the second
-field when looking for a secret to use in authenticating the peer.  In
-addition, unless overridden with the \fIuser\fR option, \fIname\fR
-will be used as the name to send to the peer when authenticating the
-local system to the peer.  (Note that pppd does not append the domain
-name to \fIname\fR.)
-.TP
-.B netmask \fIn
-Set the interface netmask to \fIn\fR, a 32 bit netmask in "decimal dot"
-notation (e.g. 255.255.255.0).  If this option is given, the value
-specified is ORed with the default netmask.  The default netmask is
-chosen based on the negotiated remote IP address; it is the
-appropriate network mask for the class of the remote IP address, ORed
-with the netmasks for any non point-to-point network interfaces in the
-system which are on the same network.  (Note: on some platforms, pppd
-will always use 255.255.255.255 for the netmask, if that is the only
-appropriate value for a point-to-point interface.)
-.TP
-.B noaccomp
-Disable Address/Control compression in both directions (send and
-receive).
-.TP
-.B noauth
-Do not require the peer to authenticate itself.  This option is
-privileged.
-.TP
-.B nobsdcomp
-Disables BSD-Compress compression; \fBpppd\fR will not request or
-agree to compress packets using the BSD-Compress scheme.
-.TP
-.B noccp
-Disable CCP (Compression Control Protocol) negotiation.  This option
-should only be required if the peer is buggy and gets confused by
-requests from pppd for CCP negotiation.
-.TP
-.B nocrtscts
-Disable hardware flow control (i.e. RTS/CTS) on the serial port.
-If neither the \fIcrtscts\fR nor the \fInocrtscts\fR nor the
-\fIcdtrcts\fR nor the \fInocdtrcts\fR option is given, the hardware
-flow control setting for the serial port is left unchanged.
-.TP
-.B nocdtrcts
-This option is a synonym for \fInocrtscts\fR. Either of these options will
-disable both forms of hardware flow control.
-.TP
-.B nodefaultroute
-Disable the \fIdefaultroute\fR option.  The system administrator who
-wishes to prevent users from creating default routes with pppd
-can do so by placing this option in the /etc/ppp/options file.
-.TP
-.B nodeflate
-Disables Deflate compression; pppd will not request or agree to
-compress packets using the Deflate scheme.
-.TP
-.B nodetach
-Don't detach from the controlling terminal.  Without this option, if a
-serial device other than the terminal on the standard input is
-specified, pppd will fork to become a background process.
-.TP
-.B noendpoint
-Disables pppd from sending an endpoint discriminator to the peer or
-accepting one from the peer (see the MULTILINK section below).  This
-option should only be required if the peer is buggy.
-.TP
-.B noip
-Disable IPCP negotiation and IP communication.  This option should
-only be required if the peer is buggy and gets confused by requests
-from pppd for IPCP negotiation.
-.TP
-.B noipv6
-Disable IPv6CP negotiation and IPv6 communication. This option should
-only be required if the peer is buggy and gets confused by requests
-from pppd for IPv6CP negotiation.
-.TP
-.B noipdefault
-Disables the default behaviour when no local IP address is specified,
-which is to determine (if possible) the local IP address from the
-hostname.  With this option, the peer will have to supply the local IP
-address during IPCP negotiation (unless it specified explicitly on the
-command line or in an options file).
-.TP
-.B noipx
-Disable the IPXCP and IPX protocols.  This option should only be
-required if the peer is buggy and gets confused by requests from pppd
-for IPXCP negotiation.
-.TP
-.B noktune
-Opposite of the \fIktune\fR option; disables pppd from changing system
-settings.
-.TP
-.B nolog
-Do not send log messages to a file or file descriptor.  This option
-cancels the \fBlogfd\fR and \fBlogfile\fR options.
-.TP
-.B nomagic
-Disable magic number negotiation.  With this option, pppd cannot
-detect a looped-back line.  This option should only be needed if the
-peer is buggy.
-.TP
-.B nomp
-Disables the use of PPP multilink.  This option is currently only
-available under Linux.
-.TP
-.B nompshortseq
-Disables the use of short (12-bit) sequence numbers in the PPP
-multilink protocol, forcing the use of 24-bit sequence numbers.  This
-option is currently only available under Linux, and only has any
-effect if multilink is enabled.
-.TP
-.B nomultilink
-Disables the use of PPP multilink.  This option is currently only
-available under Linux.
-.TP
-.B nopcomp
-Disable protocol field compression negotiation in both the receive and
-the transmit direction.
-.TP
-.B nopersist
-Exit once a connection has been made and terminated.  This is the
-default unless the \fIpersist\fR or \fIdemand\fR option has been
-specified.
-.TP
-.B nopredictor1
-Do not accept or agree to Predictor-1 compression.
-.TP
-.B noproxyarp
-Disable the \fIproxyarp\fR option.  The system administrator who
-wishes to prevent users from creating proxy ARP entries with pppd can
-do so by placing this option in the /etc/ppp/options file.
-.TP
-.B notty
-Normally, pppd requires a terminal device.  With this option, pppd
-will allocate itself a pseudo-tty master/slave pair and use the slave
-as its terminal device.  Pppd will create a child process to act as a
-`character shunt' to transfer characters between the pseudo-tty master
-and its standard input and output.  Thus pppd will transmit characters
-on its standard output and receive characters on its standard input
-even if they are not terminal devices.  This option increases the
-latency and CPU overhead of transferring data over the ppp interface
-as all of the characters sent and received must flow through the
-character shunt process.  An explicit device name may not be given if
-this option is used.
-.TP
-.B novj
-Disable Van Jacobson style TCP/IP header compression in both the
-transmit and the receive direction.
-.TP
-.B novjccomp
-Disable the connection-ID compression option in Van Jacobson style
-TCP/IP header compression.  With this option, pppd will not omit the
-connection-ID byte from Van Jacobson compressed TCP/IP headers, nor
-ask the peer to do so.
-.TP
-.B papcrypt
-Indicates that all secrets in the /etc/ppp/pap-secrets file which are
-used for checking the identity of the peer are encrypted, and thus
-pppd should not accept a password which, before encryption, is
-identical to the secret from the /etc/ppp/pap-secrets file.
-.TP
-.B pap-max-authreq \fIn
-Set the maximum number of PAP authenticate-request transmissions to
-\fIn\fR (default 10).
-.TP
-.B pap-restart \fIn
-Set the PAP restart interval (retransmission timeout) to \fIn\fR
-seconds (default 3).
-.TP
-.B pap-timeout \fIn
-Set the maximum time that pppd will wait for the peer to authenticate
-itself with PAP to \fIn\fR seconds (0 means no limit).
-.TP
-.B pass-filter \fIfilter-expression
-Specifies a packet filter to applied to data packets being sent or
-received to determine which packets should be allowed to pass.
-Packets which are rejected by the filter are silently discarded.  This
-option can be used to prevent specific network daemons (such as
-routed) using up link bandwidth, or to provide a basic firewall
-capability.
-The \fIfilter-expression\fR syntax is as described for tcpdump(1),
-except that qualifiers which are inappropriate for a PPP link, such as
-\fBether\fR and \fBarp\fR, are not permitted.  Generally the filter
-expression should be enclosed in single-quotes to prevent whitespace
-in the expression from being interpreted by the shell.  Note that it
-is possible to apply different constraints to incoming and outgoing
-packets using the \fBinbound\fR and \fBoutbound\fR qualifiers. This
-option is currently only available under NetBSD, and then only if both
-the kernel and pppd were compiled with PPP_FILTER defined.
-.TP
-.B persist
-Do not exit after a connection is terminated; instead try to reopen
-the connection.
-.TP
-.B plugin \fIfilename
-Load the shared library object file \fIfilename\fR as a plugin.  This
-is a privileged option.
-.TP
-.B predictor1
-Request that the peer compress frames that it sends using Predictor-1
-compression, and agree to compress transmitted frames with Predictor-1
-if requested.  This option has no effect unless the kernel driver
-supports Predictor-1 compression.
-.TP
-.B privgroup \fIgroup-name
-Allows members of group \fIgroup-name\fR to use privileged options.
-This is a privileged option.  Use of this option requires care as
-there is no guarantee that members of \fIgroup-name\fR cannot use pppd
-to become root themselves.  Consider it equivalent to putting the
-members of \fIgroup-name\fR in the kmem or disk group.
-.TP
-.B proxyarp
-Add an entry to this system's ARP [Address Resolution Protocol] table
-with the IP address of the peer and the Ethernet address of this
-system.  This will have the effect of making the peer appear to other
-systems to be on the local ethernet.
-.TP
-.B pty \fIscript
-Specifies that the command \fIscript\fR is to be used to communicate
-rather than a specific terminal device.  Pppd will allocate itself a
-pseudo-tty master/slave pair and use the slave as its terminal
-device.  The \fIscript\fR will be run in a child process with the
-pseudo-tty master as its standard input and output.  An explicit
-device name may not be given if this option is used.  (Note: if the
-\fIrecord\fR option is used in conjuction with the \fIpty\fR option,
-the child process will have pipes on its standard input and output.)
-.TP
-.B receive-all
-With this option, pppd will accept all control characters from the
-peer, including those marked in the receive asyncmap.  Without this
-option, pppd will discard those characters as specified in RFC1662.
-This option should only be needed if the peer is buggy.
-.TP
-.B record \fIfilename
-Specifies that pppd should record all characters sent and received to
-a file named \fIfilename\fR.  This file is opened in append mode,
-using the user's user-ID and permissions.  This option is implemented
-using a pseudo-tty and a process to transfer characters between the
-pseudo-tty and the real serial device, so it will increase the latency
-and CPU overhead of transferring data over the ppp interface.  The
-characters are stored in a tagged format with timestamps, which can be
-displayed in readable form using the pppdump(8) program.
-.TP
-.B remotename \fIname
-Set the assumed name of the remote system for authentication purposes
-to \fIname\fR.
-.TP
-.B refuse-chap
-With this option, pppd will not agree to authenticate itself to the
-peer using CHAP.
-.TP
-.B refuse-pap
-With this option, pppd will not agree to authenticate itself to the
-peer using PAP.
-.TP
-.B require-chap
-Require the peer to authenticate itself using CHAP [Challenge
-Handshake Authentication Protocol] authentication.
-.TP
-.B require-pap
-Require the peer to authenticate itself using PAP [Password
-Authentication Protocol] authentication.
-.TP
-.B show-password
-When logging the contents of PAP packets, this option causes pppd to
-show the password string in the log message.
-.TP
-.B silent
-With this option, pppd will not transmit LCP packets to initiate a
-connection until a valid LCP packet is received from the peer (as for
-the `passive' option with ancient versions of pppd).
-.TP
-.B sync
-Use synchronous HDLC serial encoding instead of asynchronous.
-The device used by pppd with this option must have sync support.
-Currently supports Microgate SyncLink adapters
-under Linux and FreeBSD 2.2.8 and later.
-.TP
-.B updetach
-With this option, pppd will detach from its controlling terminal once
-it has successfully established the ppp connection (to the point where
-the first network control protocol, usually the IP control protocol,
-has come up).
-.TP
-.B usehostname
-Enforce the use of the hostname (with domain name appended, if given)
-as the name of the local system for authentication purposes (overrides
-the \fIname\fR option).  This option is not normally needed since the
-\fIname\fR option is privileged.
-.TP
-.B usepeerdns
-Ask the peer for up to 2 DNS server addresses.  The addresses supplied
-by the peer (if any) are passed to the /etc/ppp/ip-up script in the
-environment variables DNS1 and DNS2.  In addition, pppd will create an
-/etc/ppp/resolv.conf file containing one or two nameserver lines with
-the address(es) supplied by the peer.
-.TP
-.B user \fIname
-Sets the name used for authenticating the local system to the peer to
-\fIname\fR.
-.TP
-.B vj-max-slots \fIn
-Sets the number of connection slots to be used by the Van Jacobson
-TCP/IP header compression and decompression code to \fIn\fR, which
-must be between 2 and 16 (inclusive).
-.TP
-.B welcome \fIscript
-Run the executable or shell command specified by \fIscript\fR before
-initiating PPP negotiation, after the connect script (if any) has
-completed.  A value for this option from a privileged source cannot be
-overridden by a non-privileged user.
-.TP
-.B xonxoff
-Use software flow control (i.e. XON/XOFF) to control the flow of data on
-the serial port.
-.SH OPTIONS FILES
-Options can be taken from files as well as the command line.  Pppd
-reads options from the files /etc/ppp/options, ~/.ppprc and
-/etc/ppp/options.\fIttyname\fR (in that order) before processing the
-options on the command line.  (In fact, the command-line options are
-scanned to find the terminal name before the options.\fIttyname\fR
-file is read.)  In forming the name of the options.\fIttyname\fR file,
-the initial /dev/ is removed from the terminal name, and any remaining
-/ characters are replaced with dots.
-.PP
-An options file is parsed into a series of words, delimited by
-whitespace.  Whitespace can be included in a word by enclosing the
-word in double-quotes (").  A backslash (\\) quotes the following character.
-A hash (#) starts a comment, which continues until the end of the
-line.  There is no restriction on using the \fIfile\fR or \fIcall\fR
-options within an options file.
-.SH SECURITY
-.I pppd
-provides system administrators with sufficient access control that PPP
-access to a server machine can be provided to legitimate users without
-fear of compromising the security of the server or the network it's
-on.  This control is provided through restrictions on which IP
-addresses the peer may use, based on its authenticated identity (if
-any), and through restrictions on which options a non-privileged user
-may use.  Several of pppd's options are privileged, in particular
-those which permit potentially insecure configurations; these options
-are only accepted in files which are under the control of the system
-administrator, or if pppd is being run by root.
-.PP
-The default behaviour of pppd is to allow an unauthenticated peer to
-use a given IP address only if the system does not already have a
-route to that IP address.  For example, a system with a
-permanent connection to the wider internet will normally have a
-default route, and thus all peers will have to authenticate themselves
-in order to set up a connection.  On such a system, the \fIauth\fR
-option is the default.  On the other hand, a system where the
-PPP link is the only connection to the internet will not normally have
-a default route, so the peer will be able to use almost any IP address
-without authenticating itself.
-.PP
-As indicated above, some security-sensitive options are privileged,
-which means that they may not be used by an ordinary non-privileged
-user running a setuid-root pppd, either on the command line, in the
-user's ~/.ppprc file, or in an options file read using the \fIfile\fR
-option.  Privileged options may be used in /etc/ppp/options file or in
-an options file read using the \fIcall\fR option.  If pppd is being
-run by the root user, privileged options can be used without
-restriction.
-.PP
-When opening the device, pppd uses either the invoking user's user ID
-or the root UID (that is, 0), depending on whether the device name was
-specified by the user or the system administrator.  If the device name
-comes from a privileged source, that is, /etc/ppp/options or an
-options file read using the \fIcall\fR option, pppd uses full root
-privileges when opening the device.  Thus, by creating an appropriate
-file under /etc/ppp/peers, the system administrator can allow users to
-establish a ppp connection via a device which they would not normally
-have permission to access.  Otherwise pppd uses the invoking user's
-real UID when opening the device.
-.SH AUTHENTICATION
-Authentication is the process whereby one peer convinces the other of
-its identity.  This involves the first peer sending its name to the
-other, together with some kind of secret information which could only
-come from the genuine authorized user of that name.  In such an
-exchange, we will call the first peer the "client" and the other the
-"server".  The client has a name by which it identifies itself to the
-server, and the server also has a name by which it identifies itself
-to the client.  Generally the genuine client shares some secret (or
-password) with the server, and authenticates itself by proving that it
-knows that secret.  Very often, the names used for authentication
-correspond to the internet hostnames of the peers, but this is not
-essential.
-.LP
-At present, pppd supports two authentication protocols: the Password
-Authentication Protocol (PAP) and the Challenge Handshake
-Authentication Protocol (CHAP).  PAP involves the client sending its
-name and a cleartext password to the server to authenticate itself.
-In contrast, the server initiates the CHAP authentication exchange by
-sending a challenge to the client (the challenge packet includes the
-server's name).  The client must respond with a response which
-includes its name plus a hash value derived from the shared secret and
-the challenge, in order to prove that it knows the secret.
-.LP
-The PPP protocol, being symmetrical, allows both peers to require the
-other to authenticate itself.  In that case, two separate and
-independent authentication exchanges will occur.  The two exchanges
-could use different authentication protocols, and in principle,
-different names could be used in the two exchanges.
-.LP
-The default behaviour of pppd is to agree to authenticate if
-requested, and to not require authentication from the peer.  However,
-pppd will not agree to authenticate itself with a particular protocol
-if it has no secrets which could be used to do so.
-.LP
-Pppd stores secrets for use in authentication in secrets
-files (/etc/ppp/pap-secrets for PAP, /etc/ppp/chap-secrets for CHAP).
-Both secrets files have the same format.  The secrets files can
-contain secrets for pppd to use in authenticating itself to other
-systems, as well as secrets for pppd to use when authenticating other
-systems to itself.
-.LP
-Each line in a secrets file contains one secret.  A given secret is
-specific to a particular combination of client and server - it can
-only be used by that client to authenticate itself to that server.
-Thus each line in a secrets file has at least 3 fields: the name of
-the client, the name of the server, and the secret.  These fields may
-be followed by a list of the IP addresses that the specified client
-may use when connecting to the specified server.
-.LP
-A secrets file is parsed into words as for a options file, so the
-client name, server name and secrets fields must each be one word,
-with any embedded spaces or other special characters quoted or
-escaped.  Note that case is significant in the client and server names
-and in the secret.
-.LP
-If the secret starts with an `@', what follows is assumed to be the
-name of a file from which to read the secret.  A "*" as the client or
-server name matches any name.  When selecting a secret, pppd takes the
-best match, i.e.  the match with the fewest wildcards.
-.LP
-Any following words on the same line are taken to be a list of
-acceptable IP addresses for that client.  If there are only 3 words on
-the line, or if the first word is "-", then all IP addresses are
-disallowed.  To allow any address, use "*".  A word starting with "!"
-indicates that the specified address is \fInot\fR acceptable.  An
-address may be followed by "/" and a number \fIn\fR, to indicate a
-whole subnet, i.e. all addresses which have the same value in the most
-significant \fIn\fR bits.  In this form, the address may be followed
-by a plus sign ("+") to indicate that one address from the subnet is
-authorized, based on the ppp network interface unit number in use.
-In this case, the host part of the address will be set to the unit
-number plus one.
-.LP
-Thus a secrets file contains both secrets for use in authenticating
-other hosts, plus secrets which we use for authenticating ourselves to
-others.  When pppd is authenticating the peer (checking the peer's
-identity), it chooses a secret with the peer's name in the first
-field and the name of the local system in the second field.  The
-name of the local system defaults to the hostname, with the domain
-name appended if the \fIdomain\fR option is used.  This default can be
-overridden with the \fIname\fR option, except when the
-\fIusehostname\fR option is used.
-.LP
-When pppd is choosing a secret to use in authenticating itself to the
-peer, it first determines what name it is going to use to identify
-itself to the peer.  This name can be specified by the user with the
-\fIuser\fR option.  If this option is not used, the name defaults to
-the name of the local system, determined as described in the previous
-paragraph.  Then pppd looks for a secret with this name in the first
-field and the peer's name in the second field.  Pppd will know the
-name of the peer if CHAP authentication is being used, because the
-peer will have sent it in the challenge packet.  However, if PAP is being
-used, pppd will have to determine the peer's name from the options
-specified by the user.  The user can specify the peer's name directly
-with the \fIremotename\fR option.  Otherwise, if the remote IP address
-was specified by a name (rather than in numeric form), that name will
-be used as the peer's name.  Failing that, pppd will use the null
-string as the peer's name.
-.LP
-When authenticating the peer with PAP, the supplied password is first
-compared with the secret from the secrets file.  If the password
-doesn't match the secret, the password is encrypted using crypt() and
-checked against the secret again.  Thus secrets for authenticating the
-peer can be stored in encrypted form if desired.  If the
-\fIpapcrypt\fR option is given, the first (unencrypted) comparison is
-omitted, for better security.
-.LP
-Furthermore, if the \fIlogin\fR option was specified, the username and
-password are also checked against the system password database.  Thus,
-the system administrator can set up the pap-secrets file to allow PPP
-access only to certain users, and to restrict the set of IP addresses
-that each user can use.  Typically, when using the \fIlogin\fR option,
-the secret in /etc/ppp/pap-secrets would be "", which will match any
-password supplied by the peer.  This avoids the need to have the same
-secret in two places.
-.LP
-Authentication must be satisfactorily completed before IPCP (or any
-other Network Control Protocol) can be started.  If the peer is
-required to authenticate itself, and fails to do so, pppd will
-terminated the link (by closing LCP).  If IPCP negotiates an
-unacceptable IP address for the remote host, IPCP will be closed.  IP
-packets can only be sent or received when IPCP is open.
-.LP
-In some cases it is desirable to allow some hosts which can't
-authenticate themselves to connect and use one of a restricted set of
-IP addresses, even when the local host generally requires
-authentication.  If the peer refuses to authenticate itself when
-requested, pppd takes that as equivalent to authenticating with PAP
-using the empty string for the username and password.  Thus, by adding
-a line to the pap-secrets file which specifies the empty string for
-the client and password, it is possible to allow restricted access to
-hosts which refuse to authenticate themselves.
-.SH ROUTING
-.LP
-When IPCP negotiation is completed successfully, pppd will inform the
-kernel of the local and remote IP addresses for the ppp interface.
-This is sufficient to create a host route to the remote end of the
-link, which will enable the peers to exchange IP packets.
-Communication with other machines generally requires further
-modification to routing tables and/or ARP (Address Resolution
-Protocol) tables.  In most cases the \fIdefaultroute\fR and/or
-\fIproxyarp\fR options are sufficient for this, but in some cases
-further intervention is required.  The /etc/ppp/ip-up script can be
-used for this.
-.LP
-Sometimes it is desirable to add a default route through the remote
-host, as in the case of a machine whose only connection to the
-Internet is through the ppp interface.  The \fIdefaultroute\fR option
-causes pppd to create such a default route when IPCP comes up, and
-delete it when the link is terminated.
-.LP
-In some cases it is desirable to use proxy ARP, for example on a
-server machine connected to a LAN, in order to allow other hosts to
-communicate with the remote host.  The \fIproxyarp\fR option causes
-pppd to look for a network interface on the same subnet as the remote
-host (an interface supporting broadcast and ARP, which is up and not a
-point-to-point or loopback interface).  If found, pppd creates a
-permanent, published ARP entry with the IP address of the remote host
-and the hardware address of the network interface found.
-.LP
-When the \fIdemand\fR option is used, the interface IP addresses have
-already been set at the point when IPCP comes up.  If pppd has not
-been able to negotiate the same addresses that it used to configure
-the interface (for example when the peer is an ISP that uses dynamic
-IP address assignment), pppd has to change the interface IP addresses
-to the negotiated addresses.  This may disrupt existing connections,
-and the use of demand dialling with peers that do dynamic IP address
-assignment is not recommended.
-.SH MULTILINK
-Multilink PPP provides the capability to combine two or more PPP links
-between a pair of machines into a single `bundle', which appears as a
-single virtual PPP link which has the combined bandwidth of the
-individual links.  Currently, multilink PPP is only supported under
-Linux.
-.LP
-Pppd detects that the link it is controlling is connected to the same
-peer as another link using the peer's endpoint discriminator and the
-authenticated identity of the peer (if it authenticates itself).  The
-endpoint discriminator is a block of data which is hopefully unique
-for each peer.  Several types of data can be used, including
-locally-assigned strings of bytes, IP addresses, MAC addresses,
-randomly strings of bytes, or E-164 phone numbers.  The endpoint
-discriminator sent to the peer by pppd can be set using the endpoint
-option.
-.LP
-In circumstances the peer may send no endpoint discriminator or a
-non-unique value.  The optional bundle option adds an extra string
-which is added to the peer's endpoint discriminator and authenticated
-identity when matching up links to be joined together in a bundle.
-The bundle option can also be used to allow the establishment of
-multiple bundles between the local system and the peer.  Pppd uses a
-TDB database in /var/run/pppd.tdb to match up links.
-.LP
-Assuming that multilink is enabled and the peer is willing to
-negotiate multilink, then when pppd is invoked to bring up the first
-link to the peer, it will detect that no other link is connected to
-the peer and create a new bundle, that is, another ppp network
-interface unit.  When another pppd is invoked to bring up another link
-to the peer, it will detect the existing bundle and join its link to
-it.  Currently, if the first pppd terminates (for example, because of
-a hangup or a received signal) the bundle is destroyed.
-.SH EXAMPLES
-.LP
-The following examples assume that the /etc/ppp/options file contains
-the \fIauth\fR option (as in the default /etc/ppp/options file in the
-ppp distribution).
-.LP
-Probably the most common use of pppd is to dial out to an ISP.  This
-can be done with a command such as
-.IP
-pppd call isp
-.LP
-where the /etc/ppp/peers/isp file is set up by the system
-administrator to contain something like this:
-.IP
-ttyS0 19200 crtscts
-.br
-connect '/usr/sbin/chat -v -f /etc/ppp/chat-isp'
-.br
-noauth
-.LP
-In this example, we are using chat to dial the ISP's modem and go
-through any logon sequence required.  The /etc/ppp/chat-isp file
-contains the script used by chat; it could for example contain
-something like this:
-.IP
-ABORT "NO CARRIER"
-.br
-ABORT "NO DIALTONE"
-.br
-ABORT "ERROR"
-.br
-ABORT "NO ANSWER"
-.br
-ABORT "BUSY"
-.br
-ABORT "Username/Password Incorrect"
-.br
-"" "at"
-.br
-OK "at&d0&c1"
-.br
-OK "atdt2468135"
-.br
-"name:" "^Umyuserid"
-.br
-"word:" "\\qmypassword"
-.br
-"ispts" "\\q^Uppp"
-.br
-"~-^Uppp-~"
-.LP
-See the chat(8) man page for details of chat scripts.
-.LP
-Pppd can also be used to provide a dial-in ppp service for users.  If
-the users already have login accounts, the simplest way to set up the
-ppp service is to let the users log in to their accounts and run pppd
-(installed setuid-root) with a command such as
-.IP
-pppd proxyarp
-.LP
-To allow a user to use the PPP facilities, you need to allocate an IP
-address for that user's machine and create an entry in
-/etc/ppp/pap-secrets or /etc/ppp/chap-secrets (depending on which
-authentication method the PPP implementation on the user's machine
-supports), so that the user's
-machine can authenticate itself.  For example, if Joe has a machine
-called "joespc" which is to be allowed to dial in to the machine
-called "server" and use the IP address joespc.my.net, you would add an
-entry like this to /etc/ppp/pap-secrets or /etc/ppp/chap-secrets:
-.IP
-joespc	server	"joe's secret"	joespc.my.net
-.LP
-Alternatively, you can create a username called (for example) "ppp",
-whose login shell is pppd and whose home directory is /etc/ppp.
-Options to be used when pppd is run this way can be put in
-/etc/ppp/.ppprc.
-.LP
-If your serial connection is any more complicated than a piece of
-wire, you may need to arrange for some control characters to be
-escaped.  In particular, it is often useful to escape XON (^Q) and
-XOFF (^S), using \fIasyncmap a0000\fR.  If the path includes a telnet,
-you probably should escape ^] as well (\fIasyncmap 200a0000\fR).  If
-the path includes an rlogin, you will need to use the \fIescape ff\fR
-option on the end which is running the rlogin client, since many
-rlogin implementations are not transparent; they will remove the
-sequence [0xff, 0xff, 0x73, 0x73, followed by any 8 bytes] from the
-stream.
-.SH DIAGNOSTICS
-.LP
-Messages are sent to the syslog daemon using facility LOG_DAEMON.
-(This can be overriden by recompiling pppd with the macro
-LOG_PPP defined as the desired facility.)  In order to see the error
-and debug messages, you will need to edit your /etc/syslog.conf file
-to direct the messages to the desired output device or file.
-.LP
-The \fIdebug\fR option causes the contents of all control packets sent
-or received to be logged, that is, all LCP, PAP, CHAP or IPCP packets.
-This can be useful if the PPP negotiation does not succeed or if
-authentication fails.
-If debugging is enabled at compile time, the \fIdebug\fR option also
-causes other debugging messages to be logged.
-.LP
-Debugging can also be enabled or disabled by sending a SIGUSR1 signal
-to the pppd process.  This signal acts as a toggle.
-.SH EXIT STATUS
-The exit status of pppd is set to indicate whether any error was
-detected, or the reason for the link being terminated.  The values
-used are:
-.TP
-.B 0
-Pppd has detached, or otherwise the connection was successfully
-established and terminated at the peer's request.
-.TP
-.B 1
-An immediately fatal error of some kind occurred, such as an essential
-system call failing, or running out of virtual memory.
-.TP
-.B 2
-An error was detected in processing the options given, such as two
-mutually exclusive options being used.
-.TP
-.B 3
-Pppd is not setuid-root and the invoking user is not root.
-.TP
-.B 4
-The kernel does not support PPP, for example, the PPP kernel driver is
-not included or cannot be loaded.
-.TP
-.B 5
-Pppd terminated because it was sent a SIGINT, SIGTERM or SIGHUP
-signal.
-.TP
-.B 6
-The serial port could not be locked.
-.TP
-.B 7
-The serial port could not be opened.
-.TP
-.B 8
-The connect script failed (returned a non-zero exit status).
-.TP
-.B 9
-The command specified as the argument to the \fIpty\fR option could
-not be run.
-.TP
-.B 10
-The PPP negotiation failed, that is, it didn't reach the point where
-at least one network protocol (e.g. IP) was running.
-.TP
-.B 11
-The peer system failed (or refused) to authenticate itself.
-.TP
-.B 12
-The link was established successfully and terminated because it was
-idle.
-.TP
-.B 13
-The link was established successfully and terminated because the
-connect time limit was reached.
-.TP
-.B 14
-Callback was negotiated and an incoming call should arrive shortly.
-.TP
-.B 15
-The link was terminated because the peer is not responding to echo
-requests.
-.TP
-.B 16
-The link was terminated by the modem hanging up.
-.TP
-.B 17
-The PPP negotiation failed because serial loopback was detected.
-.TP
-.B 18
-The init script failed (returned a non-zero exit status).
-.TP
-.B 19
-We failed to authenticate ourselves to the peer.
-.SH SCRIPTS
-Pppd invokes scripts at various stages in its processing which can be
-used to perform site-specific ancillary processing.  These scripts are
-usually shell scripts, but could be executable code files instead.
-Pppd does not wait for the scripts to finish.  The scripts are
-executed as root (with the real and effective user-id set to 0), so
-that they can do things such as update routing tables or run
-privileged daemons.  Be careful that the contents of these scripts do
-not compromise your system's security.  Pppd runs the scripts with
-standard input, output and error redirected to /dev/null, and with an
-environment that is empty except for some environment variables that
-give information about the link.  The environment variables that pppd
-sets are:
-.TP
-.B DEVICE
-The name of the serial tty device being used.
-.TP
-.B IFNAME
-The name of the network interface being used.
-.TP
-.B IPLOCAL
-The IP address for the local end of the link.  This is only set when
-IPCP has come up.
-.TP
-.B IPREMOTE
-The IP address for the remote end of the link.  This is only set when
-IPCP has come up.
-.TP
-.B PEERNAME
-The authenticated name of the peer.  This is only set if the peer
-authenticates itself.
-.TP
-.B SPEED
-The baud rate of the tty device.
-.TP
-.B ORIG_UID
-The real user-id of the user who invoked pppd.
-.TP
-.B PPPLOGNAME
-The username of the real user-id that invoked pppd. This is always set.
-.P
-For the ip-down and auth-down scripts, pppd also sets the following
-variables giving statistics for the connection:
-.TP
-.B CONNECT_TIME
-The number of seconds from when the PPP negotiation started until the
-connection was terminated.
-.TP
-.B BYTES_SENT
-The number of bytes sent (at the level of the serial port) during the
-connection.
-.TP
-.B BYTES_RCVD
-The number of bytes received (at the level of the serial port) during
-the connection.
-.TP
-.B LINKNAME
-The logical name of the link, set with the \fIlinkname\fR option.
-.P
-Pppd invokes the following scripts, if they exist.  It is not an error
-if they don't exist.
-.TP
-.B /etc/ppp/auth-up
-A program or script which is executed after the remote system
-successfully authenticates itself.  It is executed with the parameters
-.IP
-\fIinterface-name peer-name user-name tty-device speed\fR
-.IP
-Note that this script is not executed if the peer doesn't authenticate
-itself, for example when the \fInoauth\fR option is used.
-.TP
-.B /etc/ppp/auth-down
-A program or script which is executed when the link goes down, if
-/etc/ppp/auth-up was previously executed.  It is executed in the same
-manner with the same parameters as /etc/ppp/auth-up.
-.TP
-.B /etc/ppp/ip-up
-A program or script which is executed when the link is available for
-sending and receiving IP packets (that is, IPCP has come up).  It is
-executed with the parameters
-.IP
-\fIinterface-name tty-device speed local-IP-address
-remote-IP-address ipparam\fR
-.TP
-.B /etc/ppp/ip-down
-A program or script which is executed when the link is no longer
-available for sending and receiving IP packets.  This script can be
-used for undoing the effects of the /etc/ppp/ip-up script.  It is
-invoked in the same manner and with the same parameters as the ip-up
-script.
-.TP
-.B /etc/ppp/ipv6-up
-Like /etc/ppp/ip-up, except that it is executed when the link is available 
-for sending and receiving IPv6 packets. It is executed with the parameters
-.IP
-\fIinterface-name tty-device speed local-link-local-address
-remote-link-local-address ipparam\fR
-.TP
-.B /etc/ppp/ipv6-down
-Similar to /etc/ppp/ip-down, but it is executed when IPv6 packets can no
-longer be transmitted on the link. It is executed with the same parameters 
-as the ipv6-up script.
-.TP
-.B /etc/ppp/ipx-up
-A program or script which is executed when the link is available for
-sending and receiving IPX packets (that is, IPXCP has come up).  It is
-executed with the parameters
-.IP
-\fIinterface-name tty-device speed network-number local-IPX-node-address
-remote-IPX-node-address local-IPX-routing-protocol remote-IPX-routing-protocol
-local-IPX-router-name remote-IPX-router-name ipparam pppd-pid\fR 
-.IP
-The local-IPX-routing-protocol and remote-IPX-routing-protocol field
-may be one of the following:
-.IP
-NONE      to indicate that there is no routing protocol
-.br
-RIP       to indicate that RIP/SAP should be used
-.br
-NLSP      to indicate that Novell NLSP should be used
-.br
-RIP NLSP  to indicate that both RIP/SAP and NLSP should be used
-.TP
-.B /etc/ppp/ipx-down
-A program or script which is executed when the link is no longer
-available for sending and receiving IPX packets.  This script can be
-used for undoing the effects of the /etc/ppp/ipx-up script.  It is
-invoked in the same manner and with the same parameters as the ipx-up
-script.
-.SH FILES
-.TP
-.B /var/run/ppp\fIn\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp\fIn\fB.pid \fR(others)
-Process-ID for pppd process on ppp interface unit \fIn\fR.
-.TP
-.B /var/run/ppp-\fIname\fB.pid \fR(BSD or Linux), \fB/etc/ppp/ppp-\fIname\fB.pid \fR(others)
-Process-ID for pppd process for logical link \fIname\fR (see the
-\fIlinkname\fR option).
-.TP
-.B /etc/ppp/pap-secrets
-Usernames, passwords and IP addresses for PAP authentication.  This
-file should be owned by root and not readable or writable by any other
-user.  Pppd will log a warning if this is not the case.
-.TP
-.B /etc/ppp/chap-secrets
-Names, secrets and IP addresses for CHAP authentication.  As for
-/etc/ppp/pap-secrets, this file should be owned by root and not
-readable or writable by any other user.  Pppd will log a warning if
-this is not the case.
-.TP
-.B /etc/ppp/options
-System default options for pppd, read before user default options or
-command-line options.
-.TP
-.B ~/.ppprc
-User default options, read before /etc/ppp/options.\fIttyname\fR.
-.TP
-.B /etc/ppp/options.\fIttyname
-System default options for the serial port being used, read after
-~/.ppprc.  In forming the \fIttyname\fR part of this
-filename, an initial /dev/ is stripped from the port name (if
-present), and any slashes in the remaining part are converted to
-dots.
-.TP
-.B /etc/ppp/peers
-A directory containing options files which may contain privileged
-options, even if pppd was invoked by a user other than root.  The
-system administrator can create options files in this directory to
-permit non-privileged users to dial out without requiring the peer to
-authenticate, but only to certain trusted peers.
-.SH SEE ALSO
-.TP
-.B RFC1144
-Jacobson, V.
-\fICompressing TCP/IP headers for low-speed serial links.\fR
-February 1990.
-.TP
-.B RFC1321
-Rivest, R.
-.I The MD5 Message-Digest Algorithm.
-April 1992.
-.TP
-.B RFC1332
-McGregor, G.
-.I PPP Internet Protocol Control Protocol (IPCP).
-May 1992.
-.TP
-.B RFC1334
-Lloyd, B.; Simpson, W.A.
-.I PPP authentication protocols.
-October 1992.
-.TP
-.B RFC1661
-Simpson, W.A.
-.I The Point\-to\-Point Protocol (PPP).
-July 1994.
-.TP
-.B RFC1662
-Simpson, W.A.
-.I PPP in HDLC-like Framing.
-July 1994.
-.TP
-.B RFC2472
-Haskin, D.
-.I IP Version 6 over PPP
-December 1998.
-.SH NOTES
-The following signals have the specified effect when sent to pppd.
-.TP
-.B SIGINT, SIGTERM
-These signals cause pppd to terminate the link (by closing LCP),
-restore the serial device settings, and exit.
-.TP
-.B SIGHUP
-This signal causes pppd to terminate the link, restore the serial
-device settings, and close the serial device.  If the \fIpersist\fR or
-\fIdemand\fR option has been specified, pppd will try to reopen the
-serial device and start another connection (after the holdoff period).
-Otherwise pppd will exit.  If this signal is received during the
-holdoff period, it causes pppd to end the holdoff period immediately.
-.TP
-.B SIGUSR1
-This signal toggles the state of the \fIdebug\fR option.
-.TP
-.B SIGUSR2
-This signal causes pppd to renegotiate compression.  This can be
-useful to re-enable compression after it has been disabled as a result
-of a fatal decompression error.  (Fatal decompression errors generally
-indicate a bug in one or other implementation.)
-
-.SH AUTHORS
-Paul Mackerras (Paul.Mackerras@cs.anu.edu.au), based on earlier work by
-Drew Perkins,
-Brad Clements,
-Karl Fox,
-Greg Christy,
-and
-Brad Parker.
diff --git a/mdk-stage1/ppp/pppd/pppd.h b/mdk-stage1/ppp/pppd/pppd.h
deleted file mode 100644
index 02f6dfcef..000000000
--- a/mdk-stage1/ppp/pppd/pppd.h
+++ /dev/null
@@ -1,787 +0,0 @@
-/*
- * pppd.h - PPP daemon global declarations.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * TODO:
- */
-
-#ifndef __PPPD_H__
-#define __PPPD_H__
-
-#include <stdio.h>		/* for FILE */
-#include <limits.h>		/* for NGROUPS_MAX */
-#include <sys/param.h>		/* for MAXPATHLEN and BSD4_4, if defined */
-#include <sys/types.h>		/* for u_int32_t, if defined */
-#include <sys/time.h>		/* for struct timeval */
-#include <net/ppp_defs.h>
-#include "patchlevel.h"
-
-#if defined(__STDC__)
-#include <stdarg.h>
-#define __V(x)	x
-#else
-#include <varargs.h>
-#define __V(x)	(va_alist) va_dcl
-#define const
-#define volatile
-#endif
-
-#ifdef INET6
-#include "eui64.h"
-#endif
-
-/*
- * Limits.
- */
-
-#define NUM_PPP		1	/* One PPP interface supported (per process) */
-#define MAXWORDLEN	1024	/* max length of word in file (incl null) */
-#define MAXARGS		1	/* max # args to a command */
-#define MAXNAMELEN	256	/* max length of hostname or name for auth */
-#define MAXSECRETLEN	256	/* max length of password or secret */
-
-/*
- * Option descriptor structure.
- */
-
-typedef unsigned char	bool;
-
-enum opt_type {
-	o_special_noarg = 0,
-	o_special = 1,
-	o_bool,
-	o_int,
-	o_uint32,
-	o_string,
-	o_wild,
-};
-
-typedef struct {
-	char	*name;		/* name of the option */
-	enum opt_type type;
-	void	*addr;
-	char	*description;
-	int	flags;
-	void	*addr2;
-	int	upper_limit;
-	int	lower_limit;
-	const char *source;
-	short int priority;
-	short int winner;
-} option_t;
-
-/* Values for flags */
-#define OPT_VALUE	0xff	/* mask for presupplied value */
-#define OPT_HEX		0x100	/* int option is in hex */
-#define OPT_NOARG	0x200	/* option doesn't take argument */
-#define OPT_OR		0x400	/* OR in argument to value */
-#define OPT_INC		0x800	/* increment value */
-#define OPT_PRIV	0x1000	/* privileged option */
-#define OPT_STATIC	0x2000	/* string option goes into static array */
-#define OPT_LLIMIT	0x4000	/* check value against lower limit */
-#define OPT_ULIMIT	0x8000	/* check value against upper limit */
-#define OPT_LIMITS	(OPT_LLIMIT|OPT_ULIMIT)
-#define OPT_ZEROOK	0x10000	/* 0 value is OK even if not within limits */
-#define OPT_HIDE	0x10000	/* for o_string, print value as ?????? */
-#define OPT_A2LIST	0x10000 /* for o_special, keep list of values */
-#define OPT_NOINCR	0x20000	/* value mustn't be increased */
-#define OPT_ZEROINF	0x40000	/* with OPT_NOINCR, 0 == infinity */
-#define OPT_PRIO	0x80000	/* process option priorities for this option */
-#define OPT_PRIOSUB	0x100000 /* subsidiary member of priority group */
-#define OPT_ALIAS	0x200000 /* option is alias for previous option */
-#define OPT_A2COPY	0x400000 /* addr2 -> second location to rcv value */
-#define OPT_ENABLE	0x800000 /* use *addr2 as enable for option */
-#define OPT_A2CLR	0x1000000 /* clear *(bool *)addr2 */
-#define OPT_PRIVFIX	0x2000000 /* user can't override if set by root */
-#define OPT_INITONLY	0x4000000 /* option can only be set in init phase */
-#define OPT_DEVEQUIV	0x8000000 /* equiv to device name */
-#define OPT_DEVNAM	(OPT_INITONLY | OPT_DEVEQUIV)
-#define OPT_A2PRINTER	0x10000000 /* *addr2 is a fn for printing option */
-#define OPT_A2STRVAL	0x20000000 /* *addr2 points to current string value */
-#define OPT_NOPRINT	0x40000000 /* don't print this option at all */
-
-#define OPT_VAL(x)	((x) & OPT_VALUE)
-
-/* Values for priority */
-#define OPRIO_DEFAULT	0	/* a default value */
-#define OPRIO_CFGFILE	1	/* value from a configuration file */
-#define OPRIO_CMDLINE	2	/* value from the command line */
-#define OPRIO_SECFILE	3	/* value from options in a secrets file */
-#define OPRIO_ROOT	100	/* added to priority if OPT_PRIVFIX && root */
-
-#ifndef GIDSET_TYPE
-#define GIDSET_TYPE	gid_t
-#endif
-
-/* Structure representing a list of permitted IP addresses. */
-struct permitted_ip {
-    int		permit;		/* 1 = permit, 0 = forbid */
-    u_int32_t	base;		/* match if (addr & mask) == base */
-    u_int32_t	mask;		/* base and mask are in network byte order */
-};
-
-/*
- * Unfortunately, the linux kernel driver uses a different structure
- * for statistics from the rest of the ports.
- * This structure serves as a common representation for the bits
- * pppd needs.
- */
-struct pppd_stats {
-    unsigned int	bytes_in;
-    unsigned int	bytes_out;
-};
-
-/* Used for storing a sequence of words.  Usually malloced. */
-struct wordlist {
-    struct wordlist	*next;
-    char		*word;
-};
-
-/* An endpoint discriminator, used with multilink. */
-#define MAX_ENDP_LEN	20	/* maximum length of discriminator value */
-struct epdisc {
-    unsigned char	class;
-    unsigned char	length;
-    unsigned char	value[MAX_ENDP_LEN];
-};
-
-/* values for epdisc.class */
-#define EPD_NULL	0	/* null discriminator, no data */
-#define EPD_LOCAL	1
-#define EPD_IP		2
-#define EPD_MAC		3
-#define EPD_MAGIC	4
-#define EPD_PHONENUM	5
-
-typedef void (*notify_func) __P((void *, int));
-
-struct notifier {
-    struct notifier *next;
-    notify_func	    func;
-    void	    *arg;
-};
-
-/*
- * Global variables.
- */
-
-extern int	hungup;		/* Physical layer has disconnected */
-extern int	ifunit;		/* Interface unit number */
-extern char	ifname[];	/* Interface name */
-extern char	hostname[];	/* Our hostname */
-extern u_char	outpacket_buf[]; /* Buffer for outgoing packets */
-extern int	phase;		/* Current state of link - see values below */
-extern int	baud_rate;	/* Current link speed in bits/sec */
-extern char	*progname;	/* Name of this program */
-extern int	redirect_stderr;/* Connector's stderr should go to file */
-extern char	peer_authname[];/* Authenticated name of peer */
-extern int	privileged;	/* We were run by real-uid root */
-extern int	need_holdoff;	/* Need holdoff period after link terminates */
-extern char	**script_env;	/* Environment variables for scripts */
-extern int	detached;	/* Have detached from controlling tty */
-extern GIDSET_TYPE groups[NGROUPS_MAX];	/* groups the user is in */
-extern int	ngroups;	/* How many groups valid in groups */
-extern struct pppd_stats link_stats; /* byte/packet counts etc. for link */
-extern int	link_stats_valid; /* set if link_stats is valid */
-extern int	link_connect_time; /* time the link was up for */
-extern int	using_pty;	/* using pty as device (notty or pty opt.) */
-extern int	log_to_fd;	/* logging to this fd as well as syslog */
-extern bool	log_default;	/* log_to_fd is default (stdout) */
-extern char	*no_ppp_msg;	/* message to print if ppp not in kernel */
-extern volatile int status;	/* exit status for pppd */
-extern bool	devnam_fixed;	/* can no longer change devnam */
-extern int	unsuccess;	/* # unsuccessful connection attempts */
-extern int	do_callback;	/* set if we want to do callback next */
-extern int	doing_callback;	/* set if this is a callback */
-extern char	ppp_devnam[MAXPATHLEN];
-extern struct notifier *pidchange;   /* for notifications of pid changing */
-extern struct notifier *phasechange; /* for notifications of phase changes */
-extern struct notifier *exitnotify;  /* for notification that we're exiting */
-extern struct notifier *sigreceived; /* notification of received signal */
-extern int	listen_time;	/* time to listen first (ms) */
-
-/* Values for do_callback and doing_callback */
-#define CALLBACK_DIALIN		1	/* we are expecting the call back */
-#define CALLBACK_DIALOUT	2	/* we are dialling out to call back */
-
-/*
- * Variables set by command-line options.
- */
-
-extern int	debug;		/* Debug flag */
-extern int	kdebugflag;	/* Tell kernel to print debug messages */
-extern int	default_device;	/* Using /dev/tty or equivalent */
-extern char	devnam[MAXPATHLEN];	/* Device name */
-extern int	crtscts;	/* Use hardware flow control */
-extern bool	modem;		/* Use modem control lines */
-extern int	inspeed;	/* Input/Output speed requested */
-extern u_int32_t netmask;	/* IP netmask to set on interface */
-extern bool	lockflag;	/* Create lock file to lock the serial dev */
-extern bool	nodetach;	/* Don't detach from controlling tty */
-extern bool	updetach;	/* Detach from controlling tty when link up */
-extern char	*initializer;	/* Script to initialize physical link */
-extern char	*connect_script; /* Script to establish physical link */
-extern char	*disconnect_script; /* Script to disestablish physical link */
-extern char	*welcomer;	/* Script to welcome client after connection */
-extern char	*ptycommand;	/* Command to run on other side of pty */
-extern int	maxconnect;	/* Maximum connect time (seconds) */
-extern char	user[MAXNAMELEN];/* Our name for authenticating ourselves */
-extern char	passwd[MAXSECRETLEN];	/* Password for PAP or CHAP */
-extern bool	auth_required;	/* Peer is required to authenticate */
-extern bool	persist;	/* Reopen link after it goes down */
-extern bool	uselogin;	/* Use /etc/passwd for checking PAP */
-extern char	our_name[MAXNAMELEN];/* Our name for authentication purposes */
-extern char	remote_name[MAXNAMELEN]; /* Peer's name for authentication */
-extern bool	explicit_remote;/* remote_name specified with remotename opt */
-extern bool	demand;		/* Do dial-on-demand */
-extern char	*ipparam;	/* Extra parameter for ip up/down scripts */
-extern bool	cryptpap;	/* Others' PAP passwords are encrypted */
-extern int	idle_time_limit;/* Shut down link if idle for this long */
-extern int	holdoff;	/* Dead time before restarting */
-extern bool	holdoff_specified; /* true if user gave a holdoff value */
-extern bool	notty;		/* Stdin/out is not a tty */
-extern char	*pty_socket;	/* Socket to connect to pty */
-extern char	*record_file;	/* File to record chars sent/received */
-extern bool	sync_serial;	/* Device is synchronous serial device */
-extern int	maxfail;	/* Max # of unsuccessful connection attempts */
-extern char	linkname[MAXPATHLEN]; /* logical name for link */
-extern bool	tune_kernel;	/* May alter kernel settings as necessary */
-extern int	connect_delay;	/* Time to delay after connect script */
-extern int	max_data_rate;	/* max bytes/sec through charshunt */
-extern int	req_unit;	/* interface unit number to use */
-extern bool	multilink;	/* enable multilink operation */
-extern bool	noendpoint;	/* don't send or accept endpt. discrim. */
-extern char	*bundle_name;	/* bundle name for multilink */
-extern bool	dump_options;	/* print out option values */
-extern bool	dryrun;		/* check everything, print options, exit */
-
-#ifdef PPP_FILTER
-extern struct	bpf_program pass_filter;   /* Filter for pkts to pass */
-extern struct	bpf_program active_filter; /* Filter for link-active pkts */
-#endif
-
-#ifdef MSLANMAN
-extern bool	ms_lanman;	/* Use LanMan password instead of NT */
-				/* Has meaning only with MS-CHAP challenges */
-#endif
-
-extern char *current_option;	/* the name of the option being parsed */
-extern int  privileged_option;	/* set iff the current option came from root */
-extern char *option_source;	/* string saying where the option came from */
-extern int  option_priority;	/* priority of current options */
-
-/*
- * Values for phase.
- */
-#define PHASE_DEAD		0
-#define PHASE_INITIALIZE	1
-#define PHASE_SERIALCONN	2
-#define PHASE_DORMANT		3
-#define PHASE_ESTABLISH		4
-#define PHASE_AUTHENTICATE	5
-#define PHASE_CALLBACK		6
-#define PHASE_NETWORK		7
-#define PHASE_RUNNING		8
-#define PHASE_TERMINATE		9
-#define PHASE_DISCONNECT	10
-#define PHASE_HOLDOFF		11
-
-/*
- * The following struct gives the addresses of procedures to call
- * for a particular protocol.
- */
-struct protent {
-    u_short protocol;		/* PPP protocol number */
-    /* Initialization procedure */
-    void (*init) __P((int unit));
-    /* Process a received packet */
-    void (*input) __P((int unit, u_char *pkt, int len));
-    /* Process a received protocol-reject */
-    void (*protrej) __P((int unit));
-    /* Lower layer has come up */
-    void (*lowerup) __P((int unit));
-    /* Lower layer has gone down */
-    void (*lowerdown) __P((int unit));
-    /* Open the protocol */
-    void (*open) __P((int unit));
-    /* Close the protocol */
-    void (*close) __P((int unit, char *reason));
-    /* Print a packet in readable form */
-    int  (*printpkt) __P((u_char *pkt, int len,
-			  void (*printer) __P((void *, char *, ...)),
-			  void *arg));
-    /* Process a received data packet */
-    void (*datainput) __P((int unit, u_char *pkt, int len));
-    bool enabled_flag;		/* 0 iff protocol is disabled */
-    char *name;			/* Text name of protocol */
-    char *data_name;		/* Text name of corresponding data protocol */
-    option_t *options;		/* List of command-line options */
-    /* Check requested options, assign defaults */
-    void (*check_options) __P((void));
-    /* Configure interface for demand-dial */
-    int  (*demand_conf) __P((int unit));
-    /* Say whether to bring up link for this pkt */
-    int  (*active_pkt) __P((u_char *pkt, int len));
-};
-
-/* Table of pointers to supported protocols */
-extern struct protent *protocols[];
-
-/*
- * This struct contains pointers to a set of procedures for
- * doing operations on a "channel".  A channel provides a way
- * to send and receive PPP packets - the canonical example is
- * a serial port device in PPP line discipline (or equivalently
- * with PPP STREAMS modules pushed onto it).
- */
-struct channel {
-	/* set of options for this channel */
-	option_t *options;
-	/* find and process a per-channel options file */
-	void (*process_extra_options) __P((void));
-	/* check all the options that have been given */
-	void (*check_options) __P((void));
-	/* get the channel ready to do PPP, return a file descriptor */
-	int  (*connect) __P((void));
-	/* we're finished with the channel */
-	void (*disconnect) __P((void));
-	/* put the channel into PPP `mode' */
-	int  (*establish_ppp) __P((int));
-	/* take the channel out of PPP `mode', restore loopback if demand */
-	void (*disestablish_ppp) __P((int));
-	/* set the transmit-side PPP parameters of the channel */
-	void (*send_config) __P((int, u_int32_t, int, int));
-	/* set the receive-side PPP parameters of the channel */
-	void (*recv_config) __P((int, u_int32_t, int, int));
-	/* cleanup on error or normal exit */
-	void (*cleanup) __P((void));
-	/* close the device, called in children after fork */
-	void (*close) __P((void));
-};
-
-extern struct channel *the_channel;
-
-#define ppp_send_config(unit, mtu, accm, pc, acc)			 \
-do {									 \
-	if (the_channel->send_config)					 \
-		(*the_channel->send_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-#define ppp_recv_config(unit, mtu, accm, pc, acc)			 \
-do {									 \
-	if (the_channel->send_config)					 \
-		(*the_channel->recv_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-/*
- * Prototypes.
- */
-
-/* Procedures exported from main.c. */
-void set_ifunit __P((int));	/* set stuff that depends on ifunit */
-void detach __P((void));	/* Detach from controlling tty */
-void die __P((int));		/* Cleanup and exit */
-void quit __P((void));		/* like die(1) */
-void novm __P((char *));	/* Say we ran out of memory, and die */
-void timeout __P((void (*func)(void *), void *arg, int s, int us));
-				/* Call func(arg) after s.us seconds */
-void untimeout __P((void (*func)(void *), void *arg));
-				/* Cancel call to func(arg) */
-void record_child __P((int, char *, void (*) (void *), void *));
-int  device_script __P((char *cmd, int in, int out, int dont_wait));
-				/* Run `cmd' with given stdin and stdout */
-pid_t run_program __P((char *prog, char **args, int must_exist,
-		       void (*done)(void *), void *arg));
-				/* Run program prog with args in child */
-void reopen_log __P((void));	/* (re)open the connection to syslog */
-void update_link_stats __P((int)); /* Get stats at link termination */
-void script_setenv __P((char *, char *, int));	/* set script env var */
-void script_unsetenv __P((char *));		/* unset script env var */
-void new_phase __P((int));	/* signal start of new phase */
-void add_notifier __P((struct notifier **, notify_func, void *));
-void remove_notifier __P((struct notifier **, notify_func, void *));
-void notify __P((struct notifier *, int));
-
-/* Procedures exported from tty.c. */
-void tty_init __P((void));
-
-/* Procedures exported from utils.c. */
-void log_packet __P((u_char *, int, char *, int));
-				/* Format a packet and log it with syslog */
-void print_string __P((char *, int,  void (*) (void *, char *, ...),
-		void *));	/* Format a string for output */
-int slprintf __P((char *, int, char *, ...));		/* sprintf++ */
-int vslprintf __P((char *, int, char *, va_list));	/* vsprintf++ */
-size_t strlcpy __P((char *, const char *, size_t));	/* safe strcpy */
-size_t strlcat __P((char *, const char *, size_t));	/* safe strncpy */
-void dbglog __P((char *, ...));	/* log a debug message */
-void info __P((char *, ...));	/* log an informational message */
-void notice __P((char *, ...));	/* log a notice-level message */
-void warn __P((char *, ...));	/* log a warning message */
-void error __P((char *, ...));	/* log an error message */
-void fatal __P((char *, ...));	/* log an error message and die(1) */
-void init_pr_log __P((char *, int));	/* initialize for using pr_log */
-void pr_log __P((void *, char *, ...));	/* printer fn, output to syslog */
-void end_pr_log __P((void));	/* finish up after using pr_log */
-
-/* Procedures exported from auth.c */
-void link_required __P((int));	  /* we are starting to use the link */
-void link_terminated __P((int));  /* we are finished with the link */
-void link_down __P((int));	  /* the LCP layer has left the Opened state */
-void link_established __P((int)); /* the link is up; authenticate now */
-void start_networks __P((void));  /* start all the network control protos */
-void np_up __P((int, int));	  /* a network protocol has come up */
-void np_down __P((int, int));	  /* a network protocol has gone down */
-void np_finished __P((int, int)); /* a network protocol no longer needs link */
-void auth_peer_fail __P((int, int));
-				/* peer failed to authenticate itself */
-void auth_peer_success __P((int, int, char *, int));
-				/* peer successfully authenticated itself */
-void auth_withpeer_fail __P((int, int));
-				/* we failed to authenticate ourselves */
-void auth_withpeer_success __P((int, int));
-				/* we successfully authenticated ourselves */
-void auth_check_options __P((void));
-				/* check authentication options supplied */
-void auth_reset __P((int));	/* check what secrets we have */
-int  check_passwd __P((int, char *, int, char *, int, char **));
-				/* Check peer-supplied username/password */
-int  get_secret __P((int, char *, char *, char *, int *, int));
-				/* get "secret" for chap */
-int  auth_ip_addr __P((int, u_int32_t));
-				/* check if IP address is authorized */
-int  bad_ip_adrs __P((u_int32_t));
-				/* check if IP address is unreasonable */
-
-/* Procedures exported from demand.c */
-void demand_conf __P((void));	/* config interface(s) for demand-dial */
-void demand_block __P((void));	/* set all NPs to queue up packets */
-void demand_unblock __P((void)); /* set all NPs to pass packets */
-void demand_discard __P((void)); /* set all NPs to discard packets */
-void demand_rexmit __P((int));	/* retransmit saved frames for an NP */
-int  loop_chars __P((unsigned char *, int)); /* process chars from loopback */
-int  loop_frame __P((unsigned char *, int)); /* should we bring link up? */
-
-/* Procedures exported from multilink.c */
-void mp_check_options __P((void)); /* Check multilink-related options */
-int  mp_join_bundle __P((void));  /* join our link to an appropriate bundle */
-char *epdisc_to_str __P((struct epdisc *)); /* string from endpoint discrim. */
-int  str_to_epdisc __P((struct epdisc *, char *)); /* endpt disc. from str */
-
-/* Procedures exported from sys-*.c */
-void sys_init __P((void));	/* Do system-dependent initialization */
-void sys_cleanup __P((void));	/* Restore system state before exiting */
-int  sys_check_options __P((void)); /* Check options specified */
-void sys_close __P((void));	/* Clean up in a child before execing */
-int  ppp_available __P((void));	/* Test whether ppp kernel support exists */
-int  get_pty __P((int *, int *, char *, int));	/* Get pty master/slave */
-int  open_ppp_loopback __P((void)); /* Open loopback for demand-dialling */
-int  tty_establish_ppp __P((int));  /* Turn serial port into a ppp interface */
-void tty_disestablish_ppp __P((int)); /* Restore port to normal operation */
-void make_new_bundle __P((int, int, int, int)); /* Create new bundle */
-int  bundle_attach __P((int));	/* Attach link to existing bundle */
-void cfg_bundle __P((int, int, int, int)); /* Configure existing bundle */
-void clean_check __P((void));	/* Check if line was 8-bit clean */
-void set_up_tty __P((int, int)); /* Set up port's speed, parameters, etc. */
-void restore_tty __P((int));	/* Restore port's original parameters */
-void setdtr __P((int, int));	/* Raise or lower port's DTR line */
-void output __P((int, u_char *, int)); /* Output a PPP packet */
-void wait_input __P((struct timeval *));
-				/* Wait for input, with timeout */
-void add_fd __P((int));		/* Add fd to set to wait for */
-void remove_fd __P((int));	/* Remove fd from set to wait for */
-int  read_packet __P((u_char *)); /* Read PPP packet */
-int  get_loop_output __P((void)); /* Read pkts from loopback */
-void tty_send_config __P((int, u_int32_t, int, int));
-				/* Configure i/f transmit parameters */
-void tty_set_xaccm __P((ext_accm));
-				/* Set extended transmit ACCM */
-void tty_recv_config __P((int, u_int32_t, int, int));
-				/* Configure i/f receive parameters */
-int  ccp_test __P((int, u_char *, int, int));
-				/* Test support for compression scheme */
-void ccp_flags_set __P((int, int, int));
-				/* Set kernel CCP state */
-int  ccp_fatal_error __P((int)); /* Test for fatal decomp error in kernel */
-int  get_idle_time __P((int, struct ppp_idle *));
-				/* Find out how long link has been idle */
-int  get_ppp_stats __P((int, struct pppd_stats *));
-				/* Return link statistics */
-void netif_set_mtu __P((int, int)); /* Set PPP interface MTU */
-int  sifvjcomp __P((int, int, int, int));
-				/* Configure VJ TCP header compression */
-int  sifup __P((int));		/* Configure i/f up for one protocol */
-int  sifnpmode __P((int u, int proto, enum NPmode mode));
-				/* Set mode for handling packets for proto */
-int  sifdown __P((int));	/* Configure i/f down for one protocol */
-int  sifaddr __P((int, u_int32_t, u_int32_t, u_int32_t));
-				/* Configure IPv4 addresses for i/f */
-int  cifaddr __P((int, u_int32_t, u_int32_t));
-				/* Reset i/f IP addresses */
-#ifdef INET6
-int  sif6addr __P((int, eui64_t, eui64_t));
-				/* Configure IPv6 addresses for i/f */
-int  cif6addr __P((int, eui64_t, eui64_t));
-				/* Remove an IPv6 address from i/f */
-#endif
-int  sifdefaultroute __P((int, u_int32_t, u_int32_t));
-				/* Create default route through i/f */
-int  cifdefaultroute __P((int, u_int32_t, u_int32_t));
-				/* Delete default route through i/f */
-int  sifproxyarp __P((int, u_int32_t));
-				/* Add proxy ARP entry for peer */
-int  cifproxyarp __P((int, u_int32_t));
-				/* Delete proxy ARP entry for peer */
-u_int32_t GetMask __P((u_int32_t)); /* Get appropriate netmask for address */
-int  lock __P((char *));	/* Create lock file for device */
-int  relock __P((int));		/* Rewrite lock file with new pid */
-void unlock __P((void));	/* Delete previously-created lock file */
-int  get_host_seed __P((void));	/* Get host-dependent random number seed */
-int  have_route_to __P((u_int32_t)); /* Check if route to addr exists */
-#ifdef PPP_FILTER
-int  set_filters __P((struct bpf_program *pass, struct bpf_program *active));
-				/* Set filter programs in kernel */
-#endif
-#ifdef IPX_CHANGE
-int  sipxfaddr __P((int, unsigned long, unsigned char *));
-int  cipxfaddr __P((int));
-#endif
-int  get_if_hwaddr __P((u_char *addr, char *name));
-char *get_first_ethernet __P((void));
-
-/* Procedures exported from options.c */
-int  parse_args __P((int argc, char **argv));
-				/* Parse options from arguments given */
-int  options_from_file __P((char *filename, int must_exist, int check_prot,
-			    int privileged));
-				/* Parse options from an options file */
-int  options_from_user __P((void)); /* Parse options from user's .ppprc */
-int  options_for_tty __P((void)); /* Parse options from /etc/ppp/options.tty */
-int  options_from_list __P((struct wordlist *, int privileged));
-				/* Parse options from a wordlist */
-int  getword __P((FILE *f, char *word, int *newlinep, char *filename));
-				/* Read a word from a file */
-void option_error __P((char *fmt, ...));
-				/* Print an error message about an option */
-int int_option __P((char *, int *));
-				/* Simplified number_option for decimal ints */
-void add_options __P((option_t *)); /* Add extra options */
-void check_options __P((void));	/* check values after all options parsed */
-int  override_value __P((const char *, int, const char *));
-				/* override value if permitted by priority */
-void print_options __P((void (*) __P((void *, char *, ...)), void *));
-				/* print out values of all options */
-
-int parse_dotted_ip __P((char *, u_int32_t *));
-
-/*
- * Hooks to enable plugins to change various things.
- */
-extern int (*new_phase_hook) __P((int));
-extern int (*idle_time_hook) __P((struct ppp_idle *));
-extern int (*holdoff_hook) __P((void));
-extern int (*pap_check_hook) __P((void));
-extern int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
-				 struct wordlist **paddrs,
-				 struct wordlist **popts));
-extern void (*pap_logout_hook) __P((void));
-extern int (*pap_passwd_hook) __P((char *user, char *passwd));
-extern void (*ip_up_hook) __P((void));
-extern void (*ip_down_hook) __P((void));
-extern void (*ip_choose_hook) __P((u_int32_t *));
-
-/*
- * Inline versions of get/put char/short/long.
- * Pointer is advanced; we assume that both arguments
- * are lvalues and will already be in registers.
- * cp MUST be u_char *.
- */
-#define GETCHAR(c, cp) { \
-	(c) = *(cp)++; \
-}
-#define PUTCHAR(c, cp) { \
-	*(cp)++ = (u_char) (c); \
-}
-
-
-#define GETSHORT(s, cp) { \
-	(s) = *(cp)++ << 8; \
-	(s) |= *(cp)++; \
-}
-#define PUTSHORT(s, cp) { \
-	*(cp)++ = (u_char) ((s) >> 8); \
-	*(cp)++ = (u_char) (s); \
-}
-
-#define GETLONG(l, cp) { \
-	(l) = *(cp)++ << 8; \
-	(l) |= *(cp)++; (l) <<= 8; \
-	(l) |= *(cp)++; (l) <<= 8; \
-	(l) |= *(cp)++; \
-}
-#define PUTLONG(l, cp) { \
-	*(cp)++ = (u_char) ((l) >> 24); \
-	*(cp)++ = (u_char) ((l) >> 16); \
-	*(cp)++ = (u_char) ((l) >> 8); \
-	*(cp)++ = (u_char) (l); \
-}
-
-#define INCPTR(n, cp)	((cp) += (n))
-#define DECPTR(n, cp)	((cp) -= (n))
-
-/*
- * System dependent definitions for user-level 4.3BSD UNIX implementation.
- */
-
-#define TIMEOUT(r, f, t)	timeout((r), (f), (t), 0)
-#define UNTIMEOUT(r, f)		untimeout((r), (f))
-
-#define BCOPY(s, d, l)		memcpy(d, s, l)
-#define BZERO(s, n)		memset(s, 0, n)
-
-#define PRINTMSG(m, l)		{ info("Remote message: %0.*v", l, m); }
-
-/*
- * MAKEHEADER - Add Header fields to a packet.
- */
-#define MAKEHEADER(p, t) { \
-    PUTCHAR(PPP_ALLSTATIONS, p); \
-    PUTCHAR(PPP_UI, p); \
-    PUTSHORT(t, p); }
-
-/*
- * Exit status values.
- */
-#define EXIT_OK			0
-#define EXIT_FATAL_ERROR	1
-#define EXIT_OPTION_ERROR	2
-#define EXIT_NOT_ROOT		3
-#define EXIT_NO_KERNEL_SUPPORT	4
-#define EXIT_USER_REQUEST	5
-#define EXIT_LOCK_FAILED	6
-#define EXIT_OPEN_FAILED	7
-#define EXIT_CONNECT_FAILED	8
-#define EXIT_PTYCMD_FAILED	9
-#define EXIT_NEGOTIATION_FAILED	10
-#define EXIT_PEER_AUTH_FAILED	11
-#define EXIT_IDLE_TIMEOUT	12
-#define EXIT_CONNECT_TIME	13
-#define EXIT_CALLBACK		14
-#define EXIT_PEER_DEAD		15
-#define EXIT_HANGUP		16
-#define EXIT_LOOPBACK		17
-#define EXIT_INIT_FAILED	18
-#define EXIT_AUTH_TOPEER_FAILED	19
-
-/*
- * Debug macros.  Slightly useful for finding bugs in pppd, not particularly
- * useful for finding out why your connection isn't being established.
- */
-#ifdef DEBUGALL
-#define DEBUGMAIN	1
-#define DEBUGFSM	1
-#define DEBUGLCP	1
-#define DEBUGIPCP	1
-#define DEBUGIPV6CP	1
-#define DEBUGUPAP	1
-#define DEBUGCHAP	1
-#endif
-
-#ifndef LOG_PPP			/* we use LOG_LOCAL2 for syslog by default */
-#if defined(DEBUGMAIN) || defined(DEBUGFSM) || defined(DEBUGSYS) \
-  || defined(DEBUGLCP) || defined(DEBUGIPCP) || defined(DEBUGUPAP) \
-  || defined(DEBUGCHAP) || defined(DEBUG) || defined(DEBUGIPV6CP)
-#define LOG_PPP LOG_LOCAL2
-#else
-#define LOG_PPP LOG_DAEMON
-#endif
-#endif /* LOG_PPP */
-
-#ifdef DEBUGMAIN
-#define MAINDEBUG(x)	if (debug) dbglog x
-#else
-#define MAINDEBUG(x)
-#endif
-
-#ifdef DEBUGSYS
-#define SYSDEBUG(x)	if (debug) dbglog x
-#else
-#define SYSDEBUG(x)
-#endif
-
-#ifdef DEBUGFSM
-#define FSMDEBUG(x)	if (debug) dbglog x
-#else
-#define FSMDEBUG(x)
-#endif
-
-#ifdef DEBUGLCP
-#define LCPDEBUG(x)	if (debug) dbglog x
-#else
-#define LCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPCP
-#define IPCPDEBUG(x)	if (debug) dbglog x
-#else
-#define IPCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPV6CP
-#define IPV6CPDEBUG(x)  if (debug) dbglog x
-#else
-#define IPV6CPDEBUG(x)
-#endif
-
-#ifdef DEBUGUPAP
-#define UPAPDEBUG(x)	if (debug) dbglog x
-#else
-#define UPAPDEBUG(x)
-#endif
-
-#ifdef DEBUGCHAP
-#define CHAPDEBUG(x)	if (debug) dbglog x
-#else
-#define CHAPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPXCP
-#define IPXCPDEBUG(x)	if (debug) dbglog x
-#else
-#define IPXCPDEBUG(x)
-#endif
-
-#ifndef SIGTYPE
-#if defined(sun) || defined(SYSV) || defined(POSIX_SOURCE)
-#define SIGTYPE void
-#else
-#define SIGTYPE int
-#endif /* defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) */
-#endif /* SIGTYPE */
-
-#ifndef MIN
-#define MIN(a, b)	((a) < (b)? (a): (b))
-#endif
-#ifndef MAX
-#define MAX(a, b)	((a) > (b)? (a): (b))
-#endif
-
-#endif /* __PPP_H__ */
diff --git a/mdk-stage1/ppp/pppd/pppd.h.wtmp b/mdk-stage1/ppp/pppd/pppd.h.wtmp
deleted file mode 100644
index 4d440be06..000000000
--- a/mdk-stage1/ppp/pppd/pppd.h.wtmp
+++ /dev/null
@@ -1,789 +0,0 @@
-/*
- * pppd.h - PPP daemon global declarations.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * TODO:
- */
-
-#ifndef __PPPD_H__
-#define __PPPD_H__
-
-#include <stdio.h>		/* for FILE */
-#include <limits.h>		/* for NGROUPS_MAX */
-#include <sys/param.h>		/* for MAXPATHLEN and BSD4_4, if defined */
-#include <sys/types.h>		/* for u_int32_t, if defined */
-#include <sys/time.h>		/* for struct timeval */
-#include <net/ppp_defs.h>
-#include "patchlevel.h"
-
-#if defined(__STDC__)
-#include <stdarg.h>
-#define __V(x)	x
-#else
-#include <varargs.h>
-#define __V(x)	(va_alist) va_dcl
-#define const
-#define volatile
-#endif
-
-#ifdef INET6
-#include "eui64.h"
-#endif
-
-/*
- * Limits.
- */
-
-#define NUM_PPP		1	/* One PPP interface supported (per process) */
-#define MAXWORDLEN	1024	/* max length of word in file (incl null) */
-#define MAXARGS		1	/* max # args to a command */
-#define MAXNAMELEN	256	/* max length of hostname or name for auth */
-#define MAXSECRETLEN	256	/* max length of password or secret */
-
-/*
- * Option descriptor structure.
- */
-
-typedef unsigned char	bool;
-
-enum opt_type {
-	o_special_noarg = 0,
-	o_special = 1,
-	o_bool,
-	o_int,
-	o_uint32,
-	o_string,
-	o_wild,
-};
-
-typedef struct {
-	char	*name;		/* name of the option */
-	enum opt_type type;
-	void	*addr;
-	char	*description;
-	int	flags;
-	void	*addr2;
-	int	upper_limit;
-	int	lower_limit;
-	const char *source;
-	short int priority;
-	short int winner;
-} option_t;
-
-/* Values for flags */
-#define OPT_VALUE	0xff	/* mask for presupplied value */
-#define OPT_HEX		0x100	/* int option is in hex */
-#define OPT_NOARG	0x200	/* option doesn't take argument */
-#define OPT_OR		0x400	/* OR in argument to value */
-#define OPT_INC		0x800	/* increment value */
-#define OPT_PRIV	0x1000	/* privileged option */
-#define OPT_STATIC	0x2000	/* string option goes into static array */
-#define OPT_LLIMIT	0x4000	/* check value against lower limit */
-#define OPT_ULIMIT	0x8000	/* check value against upper limit */
-#define OPT_LIMITS	(OPT_LLIMIT|OPT_ULIMIT)
-#define OPT_ZEROOK	0x10000	/* 0 value is OK even if not within limits */
-#define OPT_HIDE	0x10000	/* for o_string, print value as ?????? */
-#define OPT_A2LIST	0x10000 /* for o_special, keep list of values */
-#define OPT_NOINCR	0x20000	/* value mustn't be increased */
-#define OPT_ZEROINF	0x40000	/* with OPT_NOINCR, 0 == infinity */
-#define OPT_PRIO	0x80000	/* process option priorities for this option */
-#define OPT_PRIOSUB	0x100000 /* subsidiary member of priority group */
-#define OPT_ALIAS	0x200000 /* option is alias for previous option */
-#define OPT_A2COPY	0x400000 /* addr2 -> second location to rcv value */
-#define OPT_ENABLE	0x800000 /* use *addr2 as enable for option */
-#define OPT_A2CLR	0x1000000 /* clear *(bool *)addr2 */
-#define OPT_PRIVFIX	0x2000000 /* user can't override if set by root */
-#define OPT_INITONLY	0x4000000 /* option can only be set in init phase */
-#define OPT_DEVEQUIV	0x8000000 /* equiv to device name */
-#define OPT_DEVNAM	(OPT_INITONLY | OPT_DEVEQUIV)
-#define OPT_A2PRINTER	0x10000000 /* *addr2 is a fn for printing option */
-#define OPT_A2STRVAL	0x20000000 /* *addr2 points to current string value */
-#define OPT_NOPRINT	0x40000000 /* don't print this option at all */
-
-#define OPT_VAL(x)	((x) & OPT_VALUE)
-
-/* Values for priority */
-#define OPRIO_DEFAULT	0	/* a default value */
-#define OPRIO_CFGFILE	1	/* value from a configuration file */
-#define OPRIO_CMDLINE	2	/* value from the command line */
-#define OPRIO_SECFILE	3	/* value from options in a secrets file */
-#define OPRIO_ROOT	100	/* added to priority if OPT_PRIVFIX && root */
-
-#ifndef GIDSET_TYPE
-#define GIDSET_TYPE	gid_t
-#endif
-
-/* Structure representing a list of permitted IP addresses. */
-struct permitted_ip {
-    int		permit;		/* 1 = permit, 0 = forbid */
-    u_int32_t	base;		/* match if (addr & mask) == base */
-    u_int32_t	mask;		/* base and mask are in network byte order */
-};
-
-/*
- * Unfortunately, the linux kernel driver uses a different structure
- * for statistics from the rest of the ports.
- * This structure serves as a common representation for the bits
- * pppd needs.
- */
-struct pppd_stats {
-    unsigned int	bytes_in;
-    unsigned int	bytes_out;
-};
-
-/* Used for storing a sequence of words.  Usually malloced. */
-struct wordlist {
-    struct wordlist	*next;
-    char		*word;
-};
-
-/* An endpoint discriminator, used with multilink. */
-#define MAX_ENDP_LEN	20	/* maximum length of discriminator value */
-struct epdisc {
-    unsigned char	class;
-    unsigned char	length;
-    unsigned char	value[MAX_ENDP_LEN];
-};
-
-/* values for epdisc.class */
-#define EPD_NULL	0	/* null discriminator, no data */
-#define EPD_LOCAL	1
-#define EPD_IP		2
-#define EPD_MAC		3
-#define EPD_MAGIC	4
-#define EPD_PHONENUM	5
-
-typedef void (*notify_func) __P((void *, int));
-
-struct notifier {
-    struct notifier *next;
-    notify_func	    func;
-    void	    *arg;
-};
-
-/*
- * Global variables.
- */
-
-extern int	hungup;		/* Physical layer has disconnected */
-extern int	ifunit;		/* Interface unit number */
-extern char	ifname[];	/* Interface name */
-extern char	hostname[];	/* Our hostname */
-extern u_char	outpacket_buf[]; /* Buffer for outgoing packets */
-extern int	phase;		/* Current state of link - see values below */
-extern int	baud_rate;	/* Current link speed in bits/sec */
-extern char	*progname;	/* Name of this program */
-extern int	redirect_stderr;/* Connector's stderr should go to file */
-extern char	peer_authname[];/* Authenticated name of peer */
-extern int	privileged;	/* We were run by real-uid root */
-extern int	need_holdoff;	/* Need holdoff period after link terminates */
-extern char	**script_env;	/* Environment variables for scripts */
-extern int	detached;	/* Have detached from controlling tty */
-extern GIDSET_TYPE groups[NGROUPS_MAX];	/* groups the user is in */
-extern int	ngroups;	/* How many groups valid in groups */
-extern struct pppd_stats link_stats; /* byte/packet counts etc. for link */
-extern int	link_stats_valid; /* set if link_stats is valid */
-extern int	link_connect_time; /* time the link was up for */
-extern int	using_pty;	/* using pty as device (notty or pty opt.) */
-extern int	log_to_fd;	/* logging to this fd as well as syslog */
-extern bool	log_default;	/* log_to_fd is default (stdout) */
-extern char	*no_ppp_msg;	/* message to print if ppp not in kernel */
-extern volatile int status;	/* exit status for pppd */
-extern bool	devnam_fixed;	/* can no longer change devnam */
-extern int	unsuccess;	/* # unsuccessful connection attempts */
-extern int	do_callback;	/* set if we want to do callback next */
-extern int	doing_callback;	/* set if this is a callback */
-extern char	ppp_devnam[MAXPATHLEN];
-extern struct notifier *pidchange;   /* for notifications of pid changing */
-extern struct notifier *phasechange; /* for notifications of phase changes */
-extern struct notifier *exitnotify;  /* for notification that we're exiting */
-extern struct notifier *sigreceived; /* notification of received signal */
-extern int	listen_time;	/* time to listen first (ms) */
-
-/* Values for do_callback and doing_callback */
-#define CALLBACK_DIALIN		1	/* we are expecting the call back */
-#define CALLBACK_DIALOUT	2	/* we are dialling out to call back */
-
-/*
- * Variables set by command-line options.
- */
-
-extern int	debug;		/* Debug flag */
-extern int	kdebugflag;	/* Tell kernel to print debug messages */
-extern int	default_device;	/* Using /dev/tty or equivalent */
-extern char	devnam[MAXPATHLEN];	/* Device name */
-extern int	crtscts;	/* Use hardware flow control */
-extern bool	modem;		/* Use modem control lines */
-extern int	inspeed;	/* Input/Output speed requested */
-extern u_int32_t netmask;	/* IP netmask to set on interface */
-extern bool	lockflag;	/* Create lock file to lock the serial dev */
-extern bool	nodetach;	/* Don't detach from controlling tty */
-extern bool	updetach;	/* Detach from controlling tty when link up */
-extern char	*initializer;	/* Script to initialize physical link */
-extern char	*connect_script; /* Script to establish physical link */
-extern char	*disconnect_script; /* Script to disestablish physical link */
-extern char	*welcomer;	/* Script to welcome client after connection */
-extern char	*ptycommand;	/* Command to run on other side of pty */
-extern int	maxconnect;	/* Maximum connect time (seconds) */
-extern char	user[MAXNAMELEN];/* Our name for authenticating ourselves */
-extern char	passwd[MAXSECRETLEN];	/* Password for PAP or CHAP */
-extern bool	auth_required;	/* Peer is required to authenticate */
-extern bool	persist;	/* Reopen link after it goes down */
-extern bool	uselogin;	/* Use /etc/passwd for checking PAP */
-extern char	our_name[MAXNAMELEN];/* Our name for authentication purposes */
-extern char	remote_name[MAXNAMELEN]; /* Peer's name for authentication */
-extern bool	explicit_remote;/* remote_name specified with remotename opt */
-extern bool	demand;		/* Do dial-on-demand */
-extern char	*ipparam;	/* Extra parameter for ip up/down scripts */
-extern bool	cryptpap;	/* Others' PAP passwords are encrypted */
-extern int	idle_time_limit;/* Shut down link if idle for this long */
-extern int	holdoff;	/* Dead time before restarting */
-extern bool	holdoff_specified; /* true if user gave a holdoff value */
-extern bool	notty;		/* Stdin/out is not a tty */
-extern char	*pty_socket;	/* Socket to connect to pty */
-extern char	*record_file;	/* File to record chars sent/received */
-extern bool	sync_serial;	/* Device is synchronous serial device */
-extern int	maxfail;	/* Max # of unsuccessful connection attempts */
-extern char	linkname[MAXPATHLEN]; /* logical name for link */
-extern bool	tune_kernel;	/* May alter kernel settings as necessary */
-extern int	connect_delay;	/* Time to delay after connect script */
-extern int	max_data_rate;	/* max bytes/sec through charshunt */
-extern int	req_unit;	/* interface unit number to use */
-extern bool	multilink;	/* enable multilink operation */
-extern bool	noendpoint;	/* don't send or accept endpt. discrim. */
-extern char	*bundle_name;	/* bundle name for multilink */
-extern bool	dump_options;	/* print out option values */
-extern bool	dryrun;		/* check everything, print options, exit */
-
-#ifdef PPP_FILTER
-extern struct	bpf_program pass_filter;   /* Filter for pkts to pass */
-extern struct	bpf_program active_filter; /* Filter for link-active pkts */
-#endif
-
-#ifdef MSLANMAN
-extern bool	ms_lanman;	/* Use LanMan password instead of NT */
-				/* Has meaning only with MS-CHAP challenges */
-#endif
-
-extern char *current_option;	/* the name of the option being parsed */
-extern int  privileged_option;	/* set iff the current option came from root */
-extern char *option_source;	/* string saying where the option came from */
-extern int  option_priority;	/* priority of current options */
-
-/*
- * Values for phase.
- */
-#define PHASE_DEAD		0
-#define PHASE_INITIALIZE	1
-#define PHASE_SERIALCONN	2
-#define PHASE_DORMANT		3
-#define PHASE_ESTABLISH		4
-#define PHASE_AUTHENTICATE	5
-#define PHASE_CALLBACK		6
-#define PHASE_NETWORK		7
-#define PHASE_RUNNING		8
-#define PHASE_TERMINATE		9
-#define PHASE_DISCONNECT	10
-#define PHASE_HOLDOFF		11
-
-/*
- * The following struct gives the addresses of procedures to call
- * for a particular protocol.
- */
-struct protent {
-    u_short protocol;		/* PPP protocol number */
-    /* Initialization procedure */
-    void (*init) __P((int unit));
-    /* Process a received packet */
-    void (*input) __P((int unit, u_char *pkt, int len));
-    /* Process a received protocol-reject */
-    void (*protrej) __P((int unit));
-    /* Lower layer has come up */
-    void (*lowerup) __P((int unit));
-    /* Lower layer has gone down */
-    void (*lowerdown) __P((int unit));
-    /* Open the protocol */
-    void (*open) __P((int unit));
-    /* Close the protocol */
-    void (*close) __P((int unit, char *reason));
-    /* Print a packet in readable form */
-    int  (*printpkt) __P((u_char *pkt, int len,
-			  void (*printer) __P((void *, char *, ...)),
-			  void *arg));
-    /* Process a received data packet */
-    void (*datainput) __P((int unit, u_char *pkt, int len));
-    bool enabled_flag;		/* 0 iff protocol is disabled */
-    char *name;			/* Text name of protocol */
-    char *data_name;		/* Text name of corresponding data protocol */
-    option_t *options;		/* List of command-line options */
-    /* Check requested options, assign defaults */
-    void (*check_options) __P((void));
-    /* Configure interface for demand-dial */
-    int  (*demand_conf) __P((int unit));
-    /* Say whether to bring up link for this pkt */
-    int  (*active_pkt) __P((u_char *pkt, int len));
-};
-
-/* Table of pointers to supported protocols */
-extern struct protent *protocols[];
-
-/*
- * This struct contains pointers to a set of procedures for
- * doing operations on a "channel".  A channel provides a way
- * to send and receive PPP packets - the canonical example is
- * a serial port device in PPP line discipline (or equivalently
- * with PPP STREAMS modules pushed onto it).
- */
-struct channel {
-	/* set of options for this channel */
-	option_t *options;
-	/* find and process a per-channel options file */
-	void (*process_extra_options) __P((void));
-	/* check all the options that have been given */
-	void (*check_options) __P((void));
-	/* get the channel ready to do PPP, return a file descriptor */
-	int  (*connect) __P((void));
-	/* we're finished with the channel */
-	void (*disconnect) __P((void));
-	/* put the channel into PPP `mode' */
-	int  (*establish_ppp) __P((int));
-	/* take the channel out of PPP `mode', restore loopback if demand */
-	void (*disestablish_ppp) __P((int));
-	/* set the transmit-side PPP parameters of the channel */
-	void (*send_config) __P((int, u_int32_t, int, int));
-	/* set the receive-side PPP parameters of the channel */
-	void (*recv_config) __P((int, u_int32_t, int, int));
-	/* cleanup on error or normal exit */
-	void (*cleanup) __P((void));
-	/* close the device, called in children after fork */
-	void (*close) __P((void));
-};
-
-extern struct channel *the_channel;
-
-#define ppp_send_config(unit, mtu, accm, pc, acc)			 \
-do {									 \
-	if (the_channel->send_config)					 \
-		(*the_channel->send_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-#define ppp_recv_config(unit, mtu, accm, pc, acc)			 \
-do {									 \
-	if (the_channel->send_config)					 \
-		(*the_channel->recv_config)((mtu), (accm), (pc), (acc)); \
-} while (0)
-
-/*
- * Prototypes.
- */
-
-/* Procedures exported from main.c. */
-void set_ifunit __P((int));	/* set stuff that depends on ifunit */
-void detach __P((void));	/* Detach from controlling tty */
-void die __P((int));		/* Cleanup and exit */
-void quit __P((void));		/* like die(1) */
-void novm __P((char *));	/* Say we ran out of memory, and die */
-void timeout __P((void (*func)(void *), void *arg, int s, int us));
-				/* Call func(arg) after s.us seconds */
-void untimeout __P((void (*func)(void *), void *arg));
-				/* Cancel call to func(arg) */
-void record_child __P((int, char *, void (*) (void *), void *));
-int  device_script __P((char *cmd, int in, int out, int dont_wait));
-				/* Run `cmd' with given stdin and stdout */
-pid_t run_program __P((char *prog, char **args, int must_exist,
-		       void (*done)(void *), void *arg));
-				/* Run program prog with args in child */
-void reopen_log __P((void));	/* (re)open the connection to syslog */
-void update_link_stats __P((int)); /* Get stats at link termination */
-void script_setenv __P((char *, char *, int));	/* set script env var */
-void script_unsetenv __P((char *));		/* unset script env var */
-void new_phase __P((int));	/* signal start of new phase */
-void add_notifier __P((struct notifier **, notify_func, void *));
-void remove_notifier __P((struct notifier **, notify_func, void *));
-void notify __P((struct notifier *, int));
-
-/* Procedures exported from tty.c. */
-void tty_init __P((void));
-
-/* Procedures exported from utils.c. */
-void log_packet __P((u_char *, int, char *, int));
-				/* Format a packet and log it with syslog */
-void print_string __P((char *, int,  void (*) (void *, char *, ...),
-		void *));	/* Format a string for output */
-int slprintf __P((char *, int, char *, ...));		/* sprintf++ */
-int vslprintf __P((char *, int, char *, va_list));	/* vsprintf++ */
-size_t strlcpy __P((char *, const char *, size_t));	/* safe strcpy */
-size_t strlcat __P((char *, const char *, size_t));	/* safe strncpy */
-void dbglog __P((char *, ...));	/* log a debug message */
-void info __P((char *, ...));	/* log an informational message */
-void notice __P((char *, ...));	/* log a notice-level message */
-void warn __P((char *, ...));	/* log a warning message */
-void error __P((char *, ...));	/* log an error message */
-void fatal __P((char *, ...));	/* log an error message and die(1) */
-void init_pr_log __P((char *, int));	/* initialize for using pr_log */
-void pr_log __P((void *, char *, ...));	/* printer fn, output to syslog */
-void end_pr_log __P((void));	/* finish up after using pr_log */
-
-/* Procedures exported from auth.c */
-void link_required __P((int));	  /* we are starting to use the link */
-void link_terminated __P((int));  /* we are finished with the link */
-void link_down __P((int));	  /* the LCP layer has left the Opened state */
-void link_established __P((int)); /* the link is up; authenticate now */
-void start_networks __P((void));  /* start all the network control protos */
-void np_up __P((int, int));	  /* a network protocol has come up */
-void np_down __P((int, int));	  /* a network protocol has gone down */
-void np_finished __P((int, int)); /* a network protocol no longer needs link */
-void auth_peer_fail __P((int, int));
-				/* peer failed to authenticate itself */
-void auth_peer_success __P((int, int, char *, int));
-				/* peer successfully authenticated itself */
-void auth_withpeer_fail __P((int, int));
-				/* we failed to authenticate ourselves */
-void auth_withpeer_success __P((int, int));
-				/* we successfully authenticated ourselves */
-void auth_check_options __P((void));
-				/* check authentication options supplied */
-void auth_reset __P((int));	/* check what secrets we have */
-int  check_passwd __P((int, char *, int, char *, int, char **));
-				/* Check peer-supplied username/password */
-int  get_secret __P((int, char *, char *, char *, int *, int));
-				/* get "secret" for chap */
-int  auth_ip_addr __P((int, u_int32_t));
-				/* check if IP address is authorized */
-int  bad_ip_adrs __P((u_int32_t));
-				/* check if IP address is unreasonable */
-
-/* Procedures exported from demand.c */
-void demand_conf __P((void));	/* config interface(s) for demand-dial */
-void demand_block __P((void));	/* set all NPs to queue up packets */
-void demand_unblock __P((void)); /* set all NPs to pass packets */
-void demand_discard __P((void)); /* set all NPs to discard packets */
-void demand_rexmit __P((int));	/* retransmit saved frames for an NP */
-int  loop_chars __P((unsigned char *, int)); /* process chars from loopback */
-int  loop_frame __P((unsigned char *, int)); /* should we bring link up? */
-
-/* Procedures exported from multilink.c */
-void mp_check_options __P((void)); /* Check multilink-related options */
-int  mp_join_bundle __P((void));  /* join our link to an appropriate bundle */
-char *epdisc_to_str __P((struct epdisc *)); /* string from endpoint discrim. */
-int  str_to_epdisc __P((struct epdisc *, char *)); /* endpt disc. from str */
-
-/* Procedures exported from sys-*.c */
-void sys_init __P((void));	/* Do system-dependent initialization */
-void sys_cleanup __P((void));	/* Restore system state before exiting */
-int  sys_check_options __P((void)); /* Check options specified */
-void sys_close __P((void));	/* Clean up in a child before execing */
-int  ppp_available __P((void));	/* Test whether ppp kernel support exists */
-int  get_pty __P((int *, int *, char *, int));	/* Get pty master/slave */
-int  open_ppp_loopback __P((void)); /* Open loopback for demand-dialling */
-int  tty_establish_ppp __P((int));  /* Turn serial port into a ppp interface */
-void tty_disestablish_ppp __P((int)); /* Restore port to normal operation */
-void make_new_bundle __P((int, int, int, int)); /* Create new bundle */
-int  bundle_attach __P((int));	/* Attach link to existing bundle */
-void cfg_bundle __P((int, int, int, int)); /* Configure existing bundle */
-void clean_check __P((void));	/* Check if line was 8-bit clean */
-void set_up_tty __P((int, int)); /* Set up port's speed, parameters, etc. */
-void restore_tty __P((int));	/* Restore port's original parameters */
-void setdtr __P((int, int));	/* Raise or lower port's DTR line */
-void output __P((int, u_char *, int)); /* Output a PPP packet */
-void wait_input __P((struct timeval *));
-				/* Wait for input, with timeout */
-void add_fd __P((int));		/* Add fd to set to wait for */
-void remove_fd __P((int));	/* Remove fd from set to wait for */
-int  read_packet __P((u_char *)); /* Read PPP packet */
-int  get_loop_output __P((void)); /* Read pkts from loopback */
-void tty_send_config __P((int, u_int32_t, int, int));
-				/* Configure i/f transmit parameters */
-void tty_set_xaccm __P((ext_accm));
-				/* Set extended transmit ACCM */
-void tty_recv_config __P((int, u_int32_t, int, int));
-				/* Configure i/f receive parameters */
-int  ccp_test __P((int, u_char *, int, int));
-				/* Test support for compression scheme */
-void ccp_flags_set __P((int, int, int));
-				/* Set kernel CCP state */
-int  ccp_fatal_error __P((int)); /* Test for fatal decomp error in kernel */
-int  get_idle_time __P((int, struct ppp_idle *));
-				/* Find out how long link has been idle */
-int  get_ppp_stats __P((int, struct pppd_stats *));
-				/* Return link statistics */
-void netif_set_mtu __P((int, int)); /* Set PPP interface MTU */
-int  sifvjcomp __P((int, int, int, int));
-				/* Configure VJ TCP header compression */
-int  sifup __P((int));		/* Configure i/f up for one protocol */
-int  sifnpmode __P((int u, int proto, enum NPmode mode));
-				/* Set mode for handling packets for proto */
-int  sifdown __P((int));	/* Configure i/f down for one protocol */
-int  sifaddr __P((int, u_int32_t, u_int32_t, u_int32_t));
-				/* Configure IPv4 addresses for i/f */
-int  cifaddr __P((int, u_int32_t, u_int32_t));
-				/* Reset i/f IP addresses */
-#ifdef INET6
-int  sif6addr __P((int, eui64_t, eui64_t));
-				/* Configure IPv6 addresses for i/f */
-int  cif6addr __P((int, eui64_t, eui64_t));
-				/* Remove an IPv6 address from i/f */
-#endif
-int  sifdefaultroute __P((int, u_int32_t, u_int32_t));
-				/* Create default route through i/f */
-int  cifdefaultroute __P((int, u_int32_t, u_int32_t));
-				/* Delete default route through i/f */
-int  sifproxyarp __P((int, u_int32_t));
-				/* Add proxy ARP entry for peer */
-int  cifproxyarp __P((int, u_int32_t));
-				/* Delete proxy ARP entry for peer */
-u_int32_t GetMask __P((u_int32_t)); /* Get appropriate netmask for address */
-int  lock __P((char *));	/* Create lock file for device */
-int  relock __P((int));		/* Rewrite lock file with new pid */
-void unlock __P((void));	/* Delete previously-created lock file */
-void logwtmp __P((const char *, const char *, const char *));
-				/* Write entry to wtmp file */
-int  get_host_seed __P((void));	/* Get host-dependent random number seed */
-int  have_route_to __P((u_int32_t)); /* Check if route to addr exists */
-#ifdef PPP_FILTER
-int  set_filters __P((struct bpf_program *pass, struct bpf_program *active));
-				/* Set filter programs in kernel */
-#endif
-#ifdef IPX_CHANGE
-int  sipxfaddr __P((int, unsigned long, unsigned char *));
-int  cipxfaddr __P((int));
-#endif
-int  get_if_hwaddr __P((u_char *addr, char *name));
-char *get_first_ethernet __P((void));
-
-/* Procedures exported from options.c */
-int  parse_args __P((int argc, char **argv));
-				/* Parse options from arguments given */
-int  options_from_file __P((char *filename, int must_exist, int check_prot,
-			    int privileged));
-				/* Parse options from an options file */
-int  options_from_user __P((void)); /* Parse options from user's .ppprc */
-int  options_for_tty __P((void)); /* Parse options from /etc/ppp/options.tty */
-int  options_from_list __P((struct wordlist *, int privileged));
-				/* Parse options from a wordlist */
-int  getword __P((FILE *f, char *word, int *newlinep, char *filename));
-				/* Read a word from a file */
-void option_error __P((char *fmt, ...));
-				/* Print an error message about an option */
-int int_option __P((char *, int *));
-				/* Simplified number_option for decimal ints */
-void add_options __P((option_t *)); /* Add extra options */
-void check_options __P((void));	/* check values after all options parsed */
-int  override_value __P((const char *, int, const char *));
-				/* override value if permitted by priority */
-void print_options __P((void (*) __P((void *, char *, ...)), void *));
-				/* print out values of all options */
-
-int parse_dotted_ip __P((char *, u_int32_t *));
-
-/*
- * Hooks to enable plugins to change various things.
- */
-extern int (*new_phase_hook) __P((int));
-extern int (*idle_time_hook) __P((struct ppp_idle *));
-extern int (*holdoff_hook) __P((void));
-extern int (*pap_check_hook) __P((void));
-extern int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp,
-				 struct wordlist **paddrs,
-				 struct wordlist **popts));
-extern void (*pap_logout_hook) __P((void));
-extern int (*pap_passwd_hook) __P((char *user, char *passwd));
-extern void (*ip_up_hook) __P((void));
-extern void (*ip_down_hook) __P((void));
-extern void (*ip_choose_hook) __P((u_int32_t *));
-
-/*
- * Inline versions of get/put char/short/long.
- * Pointer is advanced; we assume that both arguments
- * are lvalues and will already be in registers.
- * cp MUST be u_char *.
- */
-#define GETCHAR(c, cp) { \
-	(c) = *(cp)++; \
-}
-#define PUTCHAR(c, cp) { \
-	*(cp)++ = (u_char) (c); \
-}
-
-
-#define GETSHORT(s, cp) { \
-	(s) = *(cp)++ << 8; \
-	(s) |= *(cp)++; \
-}
-#define PUTSHORT(s, cp) { \
-	*(cp)++ = (u_char) ((s) >> 8); \
-	*(cp)++ = (u_char) (s); \
-}
-
-#define GETLONG(l, cp) { \
-	(l) = *(cp)++ << 8; \
-	(l) |= *(cp)++; (l) <<= 8; \
-	(l) |= *(cp)++; (l) <<= 8; \
-	(l) |= *(cp)++; \
-}
-#define PUTLONG(l, cp) { \
-	*(cp)++ = (u_char) ((l) >> 24); \
-	*(cp)++ = (u_char) ((l) >> 16); \
-	*(cp)++ = (u_char) ((l) >> 8); \
-	*(cp)++ = (u_char) (l); \
-}
-
-#define INCPTR(n, cp)	((cp) += (n))
-#define DECPTR(n, cp)	((cp) -= (n))
-
-/*
- * System dependent definitions for user-level 4.3BSD UNIX implementation.
- */
-
-#define TIMEOUT(r, f, t)	timeout((r), (f), (t), 0)
-#define UNTIMEOUT(r, f)		untimeout((r), (f))
-
-#define BCOPY(s, d, l)		memcpy(d, s, l)
-#define BZERO(s, n)		memset(s, 0, n)
-
-#define PRINTMSG(m, l)		{ info("Remote message: %0.*v", l, m); }
-
-/*
- * MAKEHEADER - Add Header fields to a packet.
- */
-#define MAKEHEADER(p, t) { \
-    PUTCHAR(PPP_ALLSTATIONS, p); \
-    PUTCHAR(PPP_UI, p); \
-    PUTSHORT(t, p); }
-
-/*
- * Exit status values.
- */
-#define EXIT_OK			0
-#define EXIT_FATAL_ERROR	1
-#define EXIT_OPTION_ERROR	2
-#define EXIT_NOT_ROOT		3
-#define EXIT_NO_KERNEL_SUPPORT	4
-#define EXIT_USER_REQUEST	5
-#define EXIT_LOCK_FAILED	6
-#define EXIT_OPEN_FAILED	7
-#define EXIT_CONNECT_FAILED	8
-#define EXIT_PTYCMD_FAILED	9
-#define EXIT_NEGOTIATION_FAILED	10
-#define EXIT_PEER_AUTH_FAILED	11
-#define EXIT_IDLE_TIMEOUT	12
-#define EXIT_CONNECT_TIME	13
-#define EXIT_CALLBACK		14
-#define EXIT_PEER_DEAD		15
-#define EXIT_HANGUP		16
-#define EXIT_LOOPBACK		17
-#define EXIT_INIT_FAILED	18
-#define EXIT_AUTH_TOPEER_FAILED	19
-
-/*
- * Debug macros.  Slightly useful for finding bugs in pppd, not particularly
- * useful for finding out why your connection isn't being established.
- */
-#ifdef DEBUGALL
-#define DEBUGMAIN	1
-#define DEBUGFSM	1
-#define DEBUGLCP	1
-#define DEBUGIPCP	1
-#define DEBUGIPV6CP	1
-#define DEBUGUPAP	1
-#define DEBUGCHAP	1
-#endif
-
-#ifndef LOG_PPP			/* we use LOG_LOCAL2 for syslog by default */
-#if defined(DEBUGMAIN) || defined(DEBUGFSM) || defined(DEBUGSYS) \
-  || defined(DEBUGLCP) || defined(DEBUGIPCP) || defined(DEBUGUPAP) \
-  || defined(DEBUGCHAP) || defined(DEBUG) || defined(DEBUGIPV6CP)
-#define LOG_PPP LOG_LOCAL2
-#else
-#define LOG_PPP LOG_DAEMON
-#endif
-#endif /* LOG_PPP */
-
-#ifdef DEBUGMAIN
-#define MAINDEBUG(x)	if (debug) dbglog x
-#else
-#define MAINDEBUG(x)
-#endif
-
-#ifdef DEBUGSYS
-#define SYSDEBUG(x)	if (debug) dbglog x
-#else
-#define SYSDEBUG(x)
-#endif
-
-#ifdef DEBUGFSM
-#define FSMDEBUG(x)	if (debug) dbglog x
-#else
-#define FSMDEBUG(x)
-#endif
-
-#ifdef DEBUGLCP
-#define LCPDEBUG(x)	if (debug) dbglog x
-#else
-#define LCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPCP
-#define IPCPDEBUG(x)	if (debug) dbglog x
-#else
-#define IPCPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPV6CP
-#define IPV6CPDEBUG(x)  if (debug) dbglog x
-#else
-#define IPV6CPDEBUG(x)
-#endif
-
-#ifdef DEBUGUPAP
-#define UPAPDEBUG(x)	if (debug) dbglog x
-#else
-#define UPAPDEBUG(x)
-#endif
-
-#ifdef DEBUGCHAP
-#define CHAPDEBUG(x)	if (debug) dbglog x
-#else
-#define CHAPDEBUG(x)
-#endif
-
-#ifdef DEBUGIPXCP
-#define IPXCPDEBUG(x)	if (debug) dbglog x
-#else
-#define IPXCPDEBUG(x)
-#endif
-
-#ifndef SIGTYPE
-#if defined(sun) || defined(SYSV) || defined(POSIX_SOURCE)
-#define SIGTYPE void
-#else
-#define SIGTYPE int
-#endif /* defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) */
-#endif /* SIGTYPE */
-
-#ifndef MIN
-#define MIN(a, b)	((a) < (b)? (a): (b))
-#endif
-#ifndef MAX
-#define MAX(a, b)	((a) > (b)? (a): (b))
-#endif
-
-#endif /* __PPP_H__ */
diff --git a/mdk-stage1/ppp/pppd/sys-linux.c b/mdk-stage1/ppp/pppd/sys-linux.c
deleted file mode 100644
index 3ab92dfba..000000000
--- a/mdk-stage1/ppp/pppd/sys-linux.c
+++ /dev/null
@@ -1,2672 +0,0 @@
-/*
- * sys-linux.c - System-dependent procedures for setting up
- * PPP interfaces on Linux systems
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/errno.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/sysmacros.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <time.h>
-#include <memory.h>
-#include <utmp.h>
-#include <mntent.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <termios.h>
-#include <unistd.h>
-
-/* This is in netdevice.h. However, this compile will fail miserably if
-   you attempt to include netdevice.h because it has so many references
-   to __memcpy functions which it should not attempt to do. So, since I
-   really don't use it, but it must be defined, define it now. */
-
-#ifndef MAX_ADDR_LEN
-#define MAX_ADDR_LEN 7
-#endif
-
-#if (defined(__GLIBC__) && __GLIBC__ >= 2) || defined(__dietlibc__)
-#include <asm/types.h>		/* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <netinet/if_ether.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/route.h>
-#include <linux/if_ether.h>
-#endif
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#if __GLIBC__ >= 2 && \
-    !(defined(__powerpc__) && __GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-#include <netipx/ipx.h>
-#else
-#include <linux/ipx.h>
-#endif
-#endif /* IPX_CHANGE */
-
-#ifdef PPP_FILTER
-#include <net/bpf.h>
-#include <linux/filter.h>
-#endif /* PPP_FILTER */
-
-#ifdef LOCKLIB
-#include <sys/locks.h>
-#endif
-
-#ifdef INET6
-#ifndef _LINUX_IN6_H
-/*
- *    This is in linux/include/net/ipv6.h.
- */
-
-struct in6_ifreq {
-    struct in6_addr ifr6_addr;
-    __u32 ifr6_prefixlen;
-    unsigned int ifr6_ifindex;
-};
-#endif
-
-#define IN6_LLADDR_FROM_EUI64(sin6, eui64) do {			\
-	memset(&sin6.s6_addr, 0, sizeof(struct in6_addr));	\
-	sin6.s6_addr16[0] = htons(0xfe80); 			\
-	eui64_copy(eui64, sin6.s6_addr32[2]);			\
-	} while (0)
-
-#endif /* INET6 */
-
-/* We can get an EIO error on an ioctl if the modem has hung up */
-#define ok_error(num) ((num)==EIO)
-
-static int tty_disc = N_TTY;	/* The TTY discipline */
-static int ppp_disc = N_PPP;	/* The PPP discpline */
-static int initfdflags = -1;	/* Initial file descriptor flags for fd */
-static int ppp_fd = -1;		/* fd which is set to PPP discipline */
-static int sock_fd = -1;	/* socket for doing interface ioctls */
-static int slave_fd = -1;
-static int master_fd = -1;
-#ifdef INET6
-static int sock6_fd = -1;
-#endif /* INET6 */
-static int ppp_dev_fd = -1;	/* fd for /dev/ppp (new style driver) */
-static int chindex;		/* channel index (new style driver) */
-
-static fd_set in_fds;		/* set of fds that wait_input waits for */
-static int max_in_fd;		/* highest fd set in in_fds */
-
-static int has_proxy_arp       = 0;
-static int driver_version      = 0;
-static int driver_modification = 0;
-static int driver_patch        = 0;
-static int driver_is_old       = 0;
-static int restore_term        = 0;	/* 1 => we've munged the terminal */
-static struct termios inittermios;	/* Initial TTY termios */
-
-static int new_style_driver = 0;
-
-static char loop_name[20];
-static unsigned char inbuf[512]; /* buffer for chars read from loopback */
-
-static int	if_is_up;	/* Interface has been marked up */
-static u_int32_t default_route_gateway;	/* Gateway for default route added */
-static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
-static char proxy_arp_dev[16];		/* Device for proxy arp entry */
-static u_int32_t our_old_addr;		/* for detecting address changes */
-static int	dynaddr_set;		/* 1 if ip_dynaddr set */
-static int	looped;			/* 1 if using loop */
-static int	link_mtu;		/* mtu for the link (not bundle) */
-
-static struct utsname utsname;	/* for the kernel version */
-static int kernel_version;
-#define KVERSION(j,n,p)	((j)*1000000 + (n)*1000 + (p))
-
-#define MAX_IFS		100
-
-#define FLAGS_GOOD (IFF_UP          | IFF_BROADCAST)
-#define FLAGS_MASK (IFF_UP          | IFF_BROADCAST | \
-		    IFF_POINTOPOINT | IFF_LOOPBACK  | IFF_NOARP)
-
-#define SIN_ADDR(x)	(((struct sockaddr_in *) (&(x)))->sin_addr.s_addr)
-
-/* Prototypes for procedures local to this file. */
-static int get_flags (int fd);
-static void set_flags (int fd, int flags);
-static int translate_speed (int bps);
-static int baud_rate_of (int speed);
-static void close_route_table (void);
-static int open_route_table (void);
-static int read_route_table (struct rtentry *rt);
-static int defaultroute_exists (struct rtentry *rt);
-static int get_ether_addr (u_int32_t ipaddr, struct sockaddr *hwaddr,
-			   char *name, int namelen);
-static void decode_version (char *buf, int *version, int *mod, int *patch);
-static int set_kdebugflag(int level);
-static int ppp_registered(void);
-static int make_ppp_unit(void);
-static void restore_loop(void);	/* Transfer ppp unit back to loopback */
-
-extern u_char	inpacket_buf[];	/* borrowed from main.c */
-
-/*
- * SET_SA_FAMILY - set the sa_family field of a struct sockaddr,
- * if it exists.
- */
-
-#define SET_SA_FAMILY(addr, family)			\
-    memset ((char *) &(addr), '\0', sizeof(addr));	\
-    addr.sa_family = (family);
-
-/*
- * Determine if the PPP connection should still be present.
- */
-
-extern int hungup;
-
-/* new_fd is the fd of a tty */
-static void set_ppp_fd (int new_fd)
-{
-	SYSDEBUG ((LOG_DEBUG, "setting ppp_fd to %d\n", new_fd));
-	ppp_fd = new_fd;
-	if (!new_style_driver)
-		ppp_dev_fd = new_fd;
-}
-
-static int still_ppp(void)
-{
-	if (new_style_driver)
-		return !hungup && ppp_fd >= 0;
-	if (!hungup || ppp_fd == slave_fd)
-		return 1;
-	if (slave_fd >= 0) {
-		set_ppp_fd(slave_fd);
-		return 1;
-	}
-	return 0;
-}
-
-/********************************************************************
- *
- * Functions to read and set the flags value in the device driver
- */
-
-static int get_flags (int fd)
-{    
-    int flags;
-
-    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &flags) < 0) {
-	if ( ok_error (errno) )
-	    flags = 0;
-	else
-	    fatal("ioctl(PPPIOCGFLAGS): %m");
-    }
-
-    SYSDEBUG ((LOG_DEBUG, "get flags = %x\n", flags));
-    return flags;
-}
-
-/********************************************************************/
-
-static void set_flags (int fd, int flags)
-{    
-    SYSDEBUG ((LOG_DEBUG, "set flags = %x\n", flags));
-
-    if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &flags) < 0) {
-	if (! ok_error (errno) )
-	    fatal("ioctl(PPPIOCSFLAGS, %x): %m", flags, errno);
-    }
-}
-
-/********************************************************************
- *
- * sys_init - System-dependent initialization.
- */
-
-void sys_init(void)
-{
-    int flags;
-
-    if (new_style_driver) {
-	ppp_dev_fd = open("/dev/ppp", O_RDWR);
-	if (ppp_dev_fd < 0)
-	    fatal("Couldn't open /dev/ppp: %m");
-	flags = fcntl(ppp_dev_fd, F_GETFL);
-	if (flags == -1
-	    || fcntl(ppp_dev_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("Couldn't set /dev/ppp to nonblock: %m");
-    }
-
-    /* Get an internet socket for doing socket ioctls. */
-    sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (sock_fd < 0)
-	fatal("Couldn't create IP socket: %m(%d)", errno);
-
-#ifdef INET6
-    sock6_fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (sock6_fd < 0)
-	sock6_fd = -errno;	/* save errno for later */
-#endif
-
-    FD_ZERO(&in_fds);
-    max_in_fd = 0;
-}
-
-/********************************************************************
- *
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-
-void sys_cleanup(void)
-{
-/*
- * Take down the device
- */
-    if (if_is_up) {
-	if_is_up = 0;
-	sifdown(0);
-    }
-/*
- * Delete any routes through the device.
- */
-    if (default_route_gateway != 0)
-	cifdefaultroute(0, 0, default_route_gateway);
-
-    if (has_proxy_arp)
-	cifproxyarp(0, proxy_arp_addr);
-}
-
-/********************************************************************
- *
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close(void)
-{
-    if (new_style_driver)
-	close(ppp_dev_fd);
-    if (sock_fd >= 0)
-	close(sock_fd);
-    if (slave_fd >= 0)
-	close(slave_fd);
-    if (master_fd >= 0)
-	close(master_fd);
-    closelog();
-}
-
-/********************************************************************
- *
- * set_kdebugflag - Define the debugging level for the kernel
- */
-
-static int set_kdebugflag (int requested_level)
-{
-    if (new_style_driver && ifunit < 0)
-	return 1;
-    if (ioctl(ppp_dev_fd, PPPIOCSDEBUG, &requested_level) < 0) {
-	if ( ! ok_error (errno) )
-	    error("ioctl(PPPIOCSDEBUG): %m");
-	return (0);
-    }
-    SYSDEBUG ((LOG_INFO, "set kernel debugging level to %d",
-		requested_level));
-    return (1);
-}
-
-/********************************************************************
- *
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-
-int tty_establish_ppp (int tty_fd)
-{
-    int x;
-    int fd = -1;
-
-/*
- * Ensure that the tty device is in exclusive mode.
- */
-    if (ioctl(tty_fd, TIOCEXCL, 0) < 0) {
-	if ( ! ok_error ( errno ))
-	    warn("Couldn't make tty exclusive: %m");
-    }
-/*
- * Demand mode - prime the old ppp device to relinquish the unit.
- */
-    if (!new_style_driver && looped
-	&& ioctl(slave_fd, PPPIOCXFERUNIT, 0) < 0) {
-	error("ioctl(transfer ppp unit): %m");
-	return -1;
-    }
-/*
- * Set the current tty to the PPP discpline
- */
-
-#ifndef N_SYNC_PPP
-#define N_SYNC_PPP 14
-#endif
-    ppp_disc = (new_style_driver && sync_serial)? N_SYNC_PPP: N_PPP;
-    if (ioctl(tty_fd, TIOCSETD, &ppp_disc) < 0) {
-	if ( ! ok_error (errno) ) {
-	    error("Couldn't set tty to PPP discipline: %m");
-	    return -1;
-	}
-    }
-
-    if (new_style_driver) {
-	/* Open another instance of /dev/ppp and connect the channel to it */
-	int flags;
-
-	if (ioctl(tty_fd, PPPIOCGCHAN, &chindex) == -1) {
-	    error("Couldn't get channel number: %m");
-	    goto err;
-	}
-	dbglog("using channel %d", chindex);
-	fd = open("/dev/ppp", O_RDWR);
-	if (fd < 0) {
-	    error("Couldn't reopen /dev/ppp: %m");
-	    goto err;
-	}
-	if (ioctl(fd, PPPIOCATTCHAN, &chindex) < 0) {
-	    error("Couldn't attach to channel %d: %m", chindex);
-	    goto err_close;
-	}
-	flags = fcntl(fd, F_GETFL);
-	if (flags == -1 || fcntl(fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("Couldn't set /dev/ppp (channel) to nonblock: %m");
-	set_ppp_fd(fd);
-
-	if (!looped)
-	    ifunit = -1;
-	if (!looped && !multilink) {
-	    /*
-	     * Create a new PPP unit.
-	     */
-	    if (make_ppp_unit() < 0)
-		goto err_close;
-	}
-
-	if (looped)
-	    set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) & ~SC_LOOP_TRAFFIC);
-
-	if (!multilink) {
-	    add_fd(ppp_dev_fd);
-	    if (ioctl(fd, PPPIOCCONNECT, &ifunit) < 0) {
-		error("Couldn't attach to PPP unit %d: %m", ifunit);
-		goto err_close;
-	    }
-	}
-
-    } else {
-	/*
-	 * Old-style driver: find out which interface we were given.
-	 */
-	set_ppp_fd (tty_fd);
-	if (ioctl(tty_fd, PPPIOCGUNIT, &x) < 0) {	
-	    if (ok_error (errno))
-		goto err;
-	    fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-	}
-	/* Check that we got the same unit again. */
-	if (looped && x != ifunit)
-	    fatal("transfer_ppp failed: wanted unit %d, got %d", ifunit, x);
-	ifunit = x;
-
-	/*
-	 * Fetch the initial file flags and reset blocking mode on the file.
-	 */
-	initfdflags = fcntl(tty_fd, F_GETFL);
-	if (initfdflags == -1 ||
-	    fcntl(tty_fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) {
-	    if ( ! ok_error (errno))
-		warn("Couldn't set device to non-blocking mode: %m");
-	}
-    }
-
-    looped = 0;
-
-    /*
-     * Enable debug in the driver if requested.
-     */
-    if (!looped)
-	set_kdebugflag (kdebugflag);
-
-#define SC_RCVB	(SC_RCV_B7_0 | SC_RCV_B7_1 | SC_RCV_EVNP | SC_RCV_ODDP)
-#define SC_LOGB	(SC_DEBUG | SC_LOG_INPKT | SC_LOG_OUTPKT | SC_LOG_RAWIN \
-		 | SC_LOG_FLUSH)
-
-    set_flags(ppp_fd, ((get_flags(ppp_fd) & ~(SC_RCVB | SC_LOGB))
-		       | ((kdebugflag * SC_DEBUG) & SC_LOGB)));
-
-    SYSDEBUG ((LOG_NOTICE, "Using version %d.%d.%d of PPP driver",
-	    driver_version, driver_modification, driver_patch));
-
-    return ppp_fd;
-
- err_close:
-    close(fd);
- err:
-    if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0 && !ok_error(errno))
-	warn("Couldn't reset tty to normal line discipline: %m");
-    return -1;
-}
-
-/********************************************************************
- *
- * tty_disestablish_ppp - Restore the serial port to normal operation,
- * and reconnect the ppp unit to the loopback if in demand mode.
- * This shouldn't call die() because it's called from die().
- */
-
-void tty_disestablish_ppp(int tty_fd)
-{
-    if (demand)
-	restore_loop();
-    if (!hungup) {
-/*
- * Flush the tty output buffer so that the TIOCSETD doesn't hang.
- */
-	if (tcflush(tty_fd, TCIOFLUSH) < 0)
-	    warn("tcflush failed: %m");
-/*
- * Restore the previous line discipline
- */
-	if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0) {
-	    if ( ! ok_error (errno))
-		error("ioctl(TIOCSETD, N_TTY): %m");
-	}
-	
-	if (ioctl(tty_fd, TIOCNXCL, 0) < 0) {
-	    if ( ! ok_error (errno))
-		warn("ioctl(TIOCNXCL): %m(%d)", errno);
-	}
-
-	/* Reset non-blocking mode on fd. */
-	if (initfdflags != -1 && fcntl(tty_fd, F_SETFL, initfdflags) < 0) {
-	    if ( ! ok_error (errno))
-		warn("Couldn't restore device fd flags: %m");
-	}
-    }
-    initfdflags = -1;
-
-    if (new_style_driver) {
-	close(ppp_fd);
-	ppp_fd = -1;
-	if (!looped && ifunit >= 0 && ioctl(ppp_dev_fd, PPPIOCDETACH) < 0)
-	    error("Couldn't release PPP unit: %m");
-	if (!multilink)
-	    remove_fd(ppp_dev_fd);
-    }
-}
-
-/*
- * make_ppp_unit - make a new ppp unit for ppp_dev_fd.
- * Assumes new_style_driver.
- */
-static int make_ppp_unit()
-{
-	int x;
-
-	ifunit = req_unit;
-	x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
-	if (x < 0 && req_unit >= 0 && errno == EEXIST) {
-		warn("Couldn't allocate PPP unit %d as it is already in use");
-		ifunit = -1;
-		x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
-	}
-	if (x < 0)
-		error("Couldn't create new ppp unit: %m");
-	return x;
-}
-
-/*
- * cfg_bundle - configure the existing bundle.
- * Used in demand mode.
- */
-void cfg_bundle(int mrru, int mtru, int rssn, int tssn)
-{
-	int flags;
-
-	if (!new_style_driver)
-		return;
-
-	/* set the mrru, mtu and flags */
-	if (ioctl(ppp_dev_fd, PPPIOCSMRRU, &mrru) < 0)
-		error("Couldn't set MRRU: %m");
-	flags = get_flags(ppp_dev_fd);
-	flags &= ~(SC_MP_SHORTSEQ | SC_MP_XSHORTSEQ);
-	flags |= (rssn? SC_MP_SHORTSEQ: 0) | (tssn? SC_MP_XSHORTSEQ: 0)
-		| (mrru? SC_MULTILINK: 0);
-
-	set_flags(ppp_dev_fd, flags);
-
-	/* connect up the channel */
-	if (ioctl(ppp_fd, PPPIOCCONNECT, &ifunit) < 0)
-		fatal("Couldn't attach to PPP unit %d: %m", ifunit);
-	add_fd(ppp_dev_fd);
-}
-
-/*
- * make_new_bundle - create a new PPP unit (i.e. a bundle)
- * and connect our channel to it.  This should only get called
- * if `multilink' was set at the time establish_ppp was called.
- * In demand mode this uses our existing bundle instead of making
- * a new one.
- */
-void make_new_bundle(int mrru, int mtru, int rssn, int tssn)
-{
-	if (!new_style_driver)
-		return;
-
-	/* make us a ppp unit */
-	if (make_ppp_unit() < 0)
-		die(1);
-
-	/* set the mrru and flags */
-	cfg_bundle(mrru, mtru, rssn, tssn);
-}
-
-/*
- * bundle_attach - attach our link to a given PPP unit.
- * We assume the unit is controlled by another pppd.
- */
-int bundle_attach(int ifnum)
-{
-	if (!new_style_driver)
-		return -1;
-
-	if (ioctl(ppp_dev_fd, PPPIOCATTACH, &ifnum) < 0) {
-		if (errno == ENXIO)
-			return 0;	/* doesn't still exist */
-		fatal("Couldn't attach to interface unit %d: %m\n", ifnum);
-	}
-	if (ioctl(ppp_fd, PPPIOCCONNECT, &ifnum) < 0)
-		fatal("Couldn't connect to interface unit %d: %m", ifnum);
-	set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_MULTILINK);
-
-	ifunit = ifnum;
-	return 1;
-}
-
-/********************************************************************
- *
- * clean_check - Fetch the flags for the device and generate
- * appropriate error messages.
- */
-void clean_check(void)
-{
-    int x;
-    char *s;
-
-    if (still_ppp()) {
-	if (ioctl(ppp_fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
-	    s = NULL;
-	    switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
-	    case SC_RCV_B7_0:
-		s = "all had bit 7 set to 1";
-		break;
-		
-	    case SC_RCV_B7_1:
-		s = "all had bit 7 set to 0";
-		break;
-		
-	    case SC_RCV_EVNP:
-		s = "all had odd parity";
-		break;
-		
-	    case SC_RCV_ODDP:
-		s = "all had even parity";
-		break;
-	    }
-	    
-	    if (s != NULL) {
-		warn("Receive serial link is not 8-bit clean:");
-		warn("Problem: %s", s);
-	    }
-	}
-    }
-}
-	
-
-/*
- * List of valid speeds.
- */
-
-struct speed {
-    int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
-    { 50, B50 },
-#endif
-#ifdef B75
-    { 75, B75 },
-#endif
-#ifdef B110
-    { 110, B110 },
-#endif
-#ifdef B134
-    { 134, B134 },
-#endif
-#ifdef B150
-    { 150, B150 },
-#endif
-#ifdef B200
-    { 200, B200 },
-#endif
-#ifdef B300
-    { 300, B300 },
-#endif
-#ifdef B600
-    { 600, B600 },
-#endif
-#ifdef B1200
-    { 1200, B1200 },
-#endif
-#ifdef B1800
-    { 1800, B1800 },
-#endif
-#ifdef B2000
-    { 2000, B2000 },
-#endif
-#ifdef B2400
-    { 2400, B2400 },
-#endif
-#ifdef B3600
-    { 3600, B3600 },
-#endif
-#ifdef B4800
-    { 4800, B4800 },
-#endif
-#ifdef B7200
-    { 7200, B7200 },
-#endif
-#ifdef B9600
-    { 9600, B9600 },
-#endif
-#ifdef B19200
-    { 19200, B19200 },
-#endif
-#ifdef B38400
-    { 38400, B38400 },
-#endif
-#ifdef B57600
-    { 57600, B57600 },
-#endif
-#ifdef B76800
-    { 76800, B76800 },
-#endif
-#ifdef B115200
-    { 115200, B115200 },
-#endif
-#ifdef EXTA
-    { 19200, EXTA },
-#endif
-#ifdef EXTB
-    { 38400, EXTB },
-#endif
-#ifdef B230400
-    { 230400, B230400 },
-#endif
-#ifdef B460800
-    { 460800, B460800 },
-#endif
-#ifdef B921600
-    { 921600, B921600 },
-#endif
-    { 0, 0 }
-};
-
-/********************************************************************
- *
- * Translate from bits/second to a speed_t.
- */
-
-static int translate_speed (int bps)
-{
-    struct speed *speedp;
-
-    if (bps != 0) {
-	for (speedp = speeds; speedp->speed_int; speedp++) {
-	    if (bps == speedp->speed_int)
-		return speedp->speed_val;
-	}
-	warn("speed %d not supported", bps);
-    }
-    return 0;
-}
-
-/********************************************************************
- *
- * Translate from a speed_t to bits/second.
- */
-
-static int baud_rate_of (int speed)
-{
-    struct speed *speedp;
-    
-    if (speed != 0) {
-	for (speedp = speeds; speedp->speed_int; speedp++) {
-	    if (speed == speedp->speed_val)
-		return speedp->speed_int;
-	}
-    }
-    return 0;
-}
-
-/********************************************************************
- *
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.  If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-
-void set_up_tty(int tty_fd, int local)
-{
-    int speed;
-    struct termios tios;
-
-    setdtr(tty_fd, 1);
-    if (tcgetattr(tty_fd, &tios) < 0) {
-	if (!ok_error(errno))
-	    fatal("tcgetattr: %m(%d)", errno);
-	return;
-    }
-    
-    if (!restore_term)
-	inittermios = tios;
-    
-    tios.c_cflag     &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-    tios.c_cflag     |= CS8 | CREAD | HUPCL;
-
-    tios.c_iflag      = IGNBRK | IGNPAR;
-    tios.c_oflag      = 0;
-    tios.c_lflag      = 0;
-    tios.c_cc[VMIN]   = 1;
-    tios.c_cc[VTIME]  = 0;
-    
-    if (local || !modem)
-	tios.c_cflag ^= (CLOCAL | HUPCL);
-
-    switch (crtscts) {
-    case 1:
-	tios.c_cflag |= CRTSCTS;
-	break;
-
-    case -2:
-	tios.c_iflag     |= IXON | IXOFF;
-	tios.c_cc[VSTOP]  = 0x13;	/* DC3 = XOFF = ^S */
-	tios.c_cc[VSTART] = 0x11;	/* DC1 = XON  = ^Q */
-	break;
-
-    case -1:
-	tios.c_cflag &= ~CRTSCTS;
-	break;
-
-    default:
-	break;
-    }
-    
-    speed = translate_speed(inspeed);
-    if (speed) {
-	cfsetospeed (&tios, speed);
-	cfsetispeed (&tios, speed);
-    }
-/*
- * We can't proceed if the serial port speed is B0,
- * since that implies that the serial port is disabled.
- */
-    else {
-	speed = cfgetospeed(&tios);
-	if (speed == B0)
-	    fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
-    }
-
-    if (tcsetattr(tty_fd, TCSAFLUSH, &tios) < 0)
-	if (!ok_error(errno))
-	    fatal("tcsetattr: %m");
-    
-    baud_rate    = baud_rate_of(speed);
-    restore_term = 1;
-}
-
-/********************************************************************
- *
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-
-void setdtr (int tty_fd, int on)
-{
-    int modembits = TIOCM_DTR;
-
-    ioctl(tty_fd, (on ? TIOCMBIS : TIOCMBIC), &modembits);
-}
-
-/********************************************************************
- *
- * restore_tty - restore the terminal to the saved settings.
- */
-
-void restore_tty (int tty_fd)
-{
-    if (restore_term) {
-	restore_term = 0;
-/*
- * Turn off echoing, because otherwise we can get into
- * a loop with the tty and the modem echoing to each other.
- * We presume we are the sole user of this tty device, so
- * when we close it, it will revert to its defaults anyway.
- */
-	if (!default_device)
-	    inittermios.c_lflag &= ~(ECHO | ECHONL);
-	
-	if (tcsetattr(tty_fd, TCSAFLUSH, &inittermios) < 0) {
-	    if (! ok_error (errno))
-		warn("tcsetattr: %m");
-	}
-    }
-}
-
-/********************************************************************
- *
- * output - Output PPP packet.
- */
-
-void output (int unit, unsigned char *p, int len)
-{
-    int fd = ppp_fd;
-    int proto;
-
-    if (debug)
-	dbglog("sent %P", p, len);
-
-    if (len < PPP_HDRLEN)
-	return;
-    if (new_style_driver) {
-	p += 2;
-	len -= 2;
-	proto = (p[0] << 8) + p[1];
-	if (ifunit >= 0 && !(proto >= 0xc000 || proto == PPP_CCPFRAG))
-	    fd = ppp_dev_fd;
-    }
-    if (write(fd, p, len) < 0) {
-	if (errno == EWOULDBLOCK || errno == ENOBUFS
-	    || errno == ENXIO || errno == EIO || errno == EINTR)
-	    warn("write: warning: %m (%d)", errno);
-	else
-	    error("write: %m (%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-
-void wait_input(struct timeval *timo)
-{
-    fd_set ready, exc;
-    int n;
-
-    ready = in_fds;
-    exc = in_fds;
-    n = select(max_in_fd + 1, &ready, NULL, &exc, timo);
-    if (n < 0 && errno != EINTR)
-	fatal("select: %m(%d)", errno);
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(int fd)
-{
-    FD_SET(fd, &in_fds);
-    if (fd > max_in_fd)
-	max_in_fd = fd;
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(int fd)
-{
-    FD_CLR(fd, &in_fds);
-}
-
-
-/********************************************************************
- *
- * read_packet - get a PPP packet from the serial device.
- */
-
-int read_packet (unsigned char *buf)
-{
-    int len, nr;
-
-    len = PPP_MRU + PPP_HDRLEN;
-    if (new_style_driver) {
-	*buf++ = PPP_ALLSTATIONS;
-	*buf++ = PPP_UI;
-	len -= 2;
-    }
-    nr = -1;
-    if (ppp_fd >= 0) {
-	nr = read(ppp_fd, buf, len);
-	if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
-	    error("read: %m");
-	if (nr < 0 && errno == ENXIO)
-	    return 0;
-    }
-    if (nr < 0 && new_style_driver && ifunit >= 0) {
-	/* N.B. we read ppp_fd first since LCP packets come in there. */
-	nr = read(ppp_dev_fd, buf, len);
-	if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
-	    error("read /dev/ppp: %m");
-	if (nr < 0 && errno == ENXIO)
-	    return 0;
-    }
-    return (new_style_driver && nr > 0)? nr+2: nr;
-}
-
-/********************************************************************
- *
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output(void)
-{
-    int rv = 0;
-    int n;
-
-    if (new_style_driver) {
-	while ((n = read_packet(inpacket_buf)) > 0)
-	    if (loop_frame(inpacket_buf, n))
-		rv = 1;
-	return rv;
-    }
-
-    while ((n = read(master_fd, inbuf, sizeof(inbuf))) > 0)
-	if (loop_chars(inbuf, n))
-	    rv = 1;
-
-    if (n == 0)
-	fatal("eof on loopback");
-
-    if (errno != EWOULDBLOCK)
-	fatal("read from loopback: %m(%d)", errno);
-
-    return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(int unit, int mtu)
-{
-    struct ifreq ifr;
-
-    SYSDEBUG ((LOG_DEBUG, "netif_set_mtu: mtu = %d\n", mtu));
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    ifr.ifr_mtu = mtu;
-	
-    if (ifunit >= 0 && ioctl(sock_fd, SIOCSIFMTU, (caddr_t) &ifr) < 0)
-	fatal("ioctl(SIOCSIFMTU): %m");
-}
-
-/********************************************************************
- *
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-
-void tty_send_config (int mtu,u_int32_t asyncmap,int pcomp,int accomp)
-{
-    u_int x;
-
-/*
- * Set the asyncmap and other parameters for the ppp device
- */
-    if (!still_ppp())
-	return;
-    link_mtu = mtu;
-    SYSDEBUG ((LOG_DEBUG, "send_config: asyncmap = %lx\n", asyncmap));
-    if (ioctl(ppp_fd, PPPIOCSASYNCMAP, (caddr_t) &asyncmap) < 0) {
-	if (!ok_error(errno))
-	    fatal("ioctl(PPPIOCSASYNCMAP): %m(%d)", errno);
-	return;
-    }
-    
-    x = get_flags(ppp_fd);
-    x = pcomp  ? x | SC_COMP_PROT : x & ~SC_COMP_PROT;
-    x = accomp ? x | SC_COMP_AC   : x & ~SC_COMP_AC;
-    x = sync_serial ? x | SC_SYNC : x & ~SC_SYNC;
-    set_flags(ppp_fd, x);
-}
-
-/********************************************************************
- *
- * tty_set_xaccm - set the extended transmit ACCM for the interface.
- */
-
-void tty_set_xaccm (ext_accm accm)
-{
-    SYSDEBUG ((LOG_DEBUG, "set_xaccm: %08lx %08lx %08lx %08lx\n",
-		accm[0], accm[1], accm[2], accm[3]));
-
-    if (!still_ppp())
-	return;
-    if (ioctl(ppp_fd, PPPIOCSXASYNCMAP, accm) < 0 && errno != ENOTTY) {
-	if ( ! ok_error (errno))
-	    warn("ioctl(set extended ACCM): %m(%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * tty_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-
-void tty_recv_config (int mru,u_int32_t asyncmap,int pcomp,int accomp)
-{
-    SYSDEBUG ((LOG_DEBUG, "recv_config: mru = %d\n", mru));
-/*
- * If we were called because the link has gone down then there is nothing
- * which may be done. Just return without incident.
- */
-    if (!still_ppp())
-	return;
-/*
- * Set the receiver parameters
- */
-    if (ioctl(ppp_fd, PPPIOCSMRU, (caddr_t) &mru) < 0) {
-	if ( ! ok_error (errno))
-	    error("ioctl(PPPIOCSMRU): %m(%d)", errno);
-    }
-    if (new_style_driver && ifunit >= 0
-	&& ioctl(ppp_dev_fd, PPPIOCSMRU, (caddr_t) &mru) < 0)
-	error("Couldn't set MRU in generic PPP layer: %m");
-
-    SYSDEBUG ((LOG_DEBUG, "recv_config: asyncmap = %lx\n", asyncmap));
-    if (ioctl(ppp_fd, PPPIOCSRASYNCMAP, (caddr_t) &asyncmap) < 0) {
-	if (!ok_error(errno))
-	    error("ioctl(PPPIOCSRASYNCMAP): %m(%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-
-int ccp_test (int unit, u_char *opt_ptr, int opt_len, int for_transmit)
-{
-    struct ppp_option_data data;
-
-    memset (&data, '\0', sizeof (data));
-    data.ptr      = opt_ptr;
-    data.length   = opt_len;
-    data.transmit = for_transmit;
-
-    if (ioctl(ppp_dev_fd, PPPIOCSCOMPRESS, (caddr_t) &data) >= 0)
-	return 1;
-
-    return (errno == ENOBUFS)? 0: -1;
-}
-
-/********************************************************************
- *
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-
-void ccp_flags_set (int unit, int isopen, int isup)
-{
-    if (still_ppp()) {
-	int x = get_flags(ppp_dev_fd);
-	x = isopen? x | SC_CCP_OPEN : x &~ SC_CCP_OPEN;
-	x = isup?   x | SC_CCP_UP   : x &~ SC_CCP_UP;
-	set_flags (ppp_dev_fd, x);
-    }
-}
-
-#ifdef PPP_FILTER
-/*
- * set_filters - set the active and pass filters in the kernel driver.
- */
-int set_filters(struct bpf_program *pass, struct bpf_program *active)
-{
-	struct sock_fprog fp;
-
-	fp.len = pass->bf_len;
-	fp.filter = (struct sock_filter *) pass->bf_insns;
-	if (ioctl(ppp_dev_fd, PPPIOCSPASS, &fp) < 0) {
-		if (errno == ENOTTY)
-			warn("kernel does not support PPP filtering");
-		else
-			error("Couldn't set pass-filter in kernel: %m");
-		return 0;
-	}
-	fp.len = active->bf_len;
-	fp.filter = (struct sock_filter *) active->bf_insns;
-	if (ioctl(ppp_dev_fd, PPPIOCSACTIVE, &fp) < 0) {
-		error("Couldn't set active-filter in kernel: %m");
-		return 0;
-	}
-	return 1;
-}
-#endif /* PPP_FILTER */
-
-/********************************************************************
- *
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
-    int u;
-    struct ppp_idle *ip;
-{
-    return ioctl(ppp_dev_fd, PPPIOCGIDLE, ip) >= 0;
-} 
-
-/********************************************************************
- *
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
-    int u;
-    struct pppd_stats *stats;
-{
-    struct ifpppstatsreq req;
-
-    memset (&req, 0, sizeof (req));
-
-    req.stats_ptr = (caddr_t) &req.stats;
-    strlcpy(req.ifr__name, ifname, sizeof(req.ifr__name));
-    if (ioctl(sock_fd, SIOCGPPPSTATS, &req) < 0) {
-	error("Couldn't get PPP statistics: %m");
-	return 0;
-    }
-    stats->bytes_in = req.stats.p.ppp_ibytes;
-    stats->bytes_out = req.stats.p.ppp_obytes;
-    return 1;
-}
-
-/********************************************************************
- *
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise.  This is necessary because of patent nonsense.
- */
-
-int ccp_fatal_error (int unit)
-{
-    int x = get_flags(ppp_dev_fd);
-
-    return x & SC_DC_FERROR;
-}
-
-/********************************************************************
- *
- * path_to_procfs - find the path to the proc file system mount point
- */
-static char proc_path[MAXPATHLEN];
-static int proc_path_len;
-
-static char *path_to_procfs(const char *tail)
-{
-    struct mntent *mntent;
-    FILE *fp;
-
-    if (proc_path_len == 0) {
-	/* Default the mount location of /proc */
-	strlcpy (proc_path, "/proc", sizeof(proc_path));
-	proc_path_len = 5;
-	fp = fopen(MOUNTED, "r");
-	if (fp != NULL) {
-	    while ((mntent = getmntent(fp)) != NULL) {
-		if (strcmp(mntent->mnt_type, MNTTYPE_IGNORE) == 0)
-		    continue;
-		if (strcmp(mntent->mnt_type, "proc") == 0) {
-		    strlcpy(proc_path, mntent->mnt_dir, sizeof(proc_path));
-		    proc_path_len = strlen(proc_path);
-		    break;
-		}
-	    }
-	    fclose (fp);
-	}
-    }
-
-    strlcpy(proc_path + proc_path_len, tail,
-	    sizeof(proc_path) - proc_path_len);
-    return proc_path;
-}
-
-/*
- * /proc/net/route parsing stuff.
- */
-#define ROUTE_MAX_COLS	12
-FILE *route_fd = (FILE *) 0;
-static char route_buffer[512];
-static int route_dev_col, route_dest_col, route_gw_col;
-static int route_flags_col, route_mask_col;
-static int route_num_cols;
-
-static int open_route_table (void);
-static void close_route_table (void);
-static int read_route_table (struct rtentry *rt);
-
-/********************************************************************
- *
- * close_route_table - close the interface to the route table
- */
-
-static void close_route_table (void)
-{
-    if (route_fd != (FILE *) 0) {
-        fclose (route_fd);
-        route_fd = (FILE *) 0;
-    }
-}
-
-/********************************************************************
- *
- * open_route_table - open the interface to the route table
- */
-static char route_delims[] = " \t\n";
-
-static int open_route_table (void)
-{
-    char *path;
-
-    close_route_table();
-
-    path = path_to_procfs("/net/route");
-    route_fd = fopen (path, "r");
-    if (route_fd == NULL) {
-        error("can't open routing table %s: %m", path);
-        return 0;
-    }
-
-    route_dev_col = 0;		/* default to usual columns */
-    route_dest_col = 1;
-    route_gw_col = 2;
-    route_flags_col = 3;
-    route_mask_col = 7;
-    route_num_cols = 8;
-
-    /* parse header line */
-    if (fgets(route_buffer, sizeof(route_buffer), route_fd) != 0) {
-	char *p = route_buffer, *q;
-	int col;
-	for (col = 0; col < ROUTE_MAX_COLS; ++col) {
-	    int used = 1;
-	    if ((q = strtok(p, route_delims)) == 0)
-		break;
-	    if (strcasecmp(q, "iface") == 0)
-		route_dev_col = col;
-	    else if (strcasecmp(q, "destination") == 0)
-		route_dest_col = col;
-	    else if (strcasecmp(q, "gateway") == 0)
-		route_gw_col = col;
-	    else if (strcasecmp(q, "flags") == 0)
-		route_flags_col = col;
-	    else if (strcasecmp(q, "mask") == 0)
-		route_mask_col = col;
-	    else
-		used = 0;
-	    if (used && col >= route_num_cols)
-		route_num_cols = col + 1;
-	    p = NULL;
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * read_route_table - read the next entry from the route table
- */
-
-static int read_route_table(struct rtentry *rt)
-{
-    char *cols[ROUTE_MAX_COLS], *p;
-    int col;
-	
-    memset (rt, '\0', sizeof (struct rtentry));
-
-    if (fgets (route_buffer, sizeof (route_buffer), route_fd) == (char *) 0)
-	return 0;
-
-    p = route_buffer;
-    for (col = 0; col < route_num_cols; ++col) {
-	cols[col] = strtok(p, route_delims);
-	if (cols[col] == NULL)
-	    return 0;		/* didn't get enough columns */
-	p = NULL;
-    }
-
-    SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
-    SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
-    SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
-
-    rt->rt_flags = (short) strtoul(cols[route_flags_col], NULL, 16);
-    rt->rt_dev   = cols[route_dev_col];
-
-    return 1;
-}
-
-/********************************************************************
- *
- * defaultroute_exists - determine if there is a default route
- */
-
-static int defaultroute_exists (struct rtentry *rt)
-{
-    int result = 0;
-
-    if (!open_route_table())
-        return 0;
-
-    while (read_route_table(rt) != 0) {
-        if ((rt->rt_flags & RTF_UP) == 0)
-	    continue;
-
-	if (kernel_version > KVERSION(2,1,0) && SIN_ADDR(rt->rt_genmask) != 0)
-	    continue;
-        if (SIN_ADDR(rt->rt_dst) == 0L) {
-	    result = 1;
-	    break;
-	}
-    }
-
-    close_route_table();
-    return result;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address.  `addr' is in network byte order.
- * Return value is 1 if yes, 0 if no, -1 if don't know.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(u_int32_t addr)
-{
-    struct rtentry rt;
-    int result = 0;
-
-    if (!open_route_table())
-	return -1;		/* don't know */
-
-    while (read_route_table(&rt)) {
-	if ((rt.rt_flags & RTF_UP) == 0 || strcmp(rt.rt_dev, ifname) == 0)
-	    continue;
-	if ((addr & SIN_ADDR(rt.rt_genmask)) == SIN_ADDR(rt.rt_dst)) {
-	    result = 1;
-	    break;
-	}
-    }
-
-    close_route_table();
-    return result;
-}
-
-/********************************************************************
- *
- * sifdefaultroute - assign a default route through the address given.
- */
-
-int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
-    struct rtentry rt;
-
-    if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) {
-	u_int32_t old_gateway = SIN_ADDR(rt.rt_gateway);
-
-	if (old_gateway != gateway)
-	    error("not replacing existing default route to %s [%I]",
-		  rt.rt_dev, old_gateway);
-	return 0;
-    }
-
-    memset (&rt, '\0', sizeof (rt));
-    SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-    SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
-    if (kernel_version > KVERSION(2,1,0)) {
-	SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	SIN_ADDR(rt.rt_genmask) = 0L;
-    }
-
-    SIN_ADDR(rt.rt_gateway) = gateway;
-    
-    rt.rt_flags = RTF_UP | RTF_GATEWAY;
-    if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
-	if ( ! ok_error ( errno ))
-	    error("default route ioctl(SIOCADDRT): %m(%d)", errno);
-	return 0;
-    }
-
-    default_route_gateway = gateway;
-    return 1;
-}
-
-/********************************************************************
- *
- * cifdefaultroute - delete a default route through the address given.
- */
-
-int cifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
-    struct rtentry rt;
-
-    default_route_gateway = 0;
-
-    memset (&rt, '\0', sizeof (rt));
-    SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-    SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
-    if (kernel_version > KVERSION(2,1,0)) {
-	SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	SIN_ADDR(rt.rt_genmask) = 0L;
-    }
-
-    SIN_ADDR(rt.rt_gateway) = gateway;
-    
-    rt.rt_flags = RTF_UP | RTF_GATEWAY;
-    if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
-	if (still_ppp()) {
-	    if ( ! ok_error ( errno ))
-		error("default route ioctl(SIOCDELRT): %m (%d)", errno);
-	    return 0;
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-
-int sifproxyarp (int unit, u_int32_t his_adr)
-{
-    struct arpreq arpreq;
-    char *forw_path;
-
-    if (has_proxy_arp == 0) {
-	memset (&arpreq, '\0', sizeof(arpreq));
-    
-	SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
-	SIN_ADDR(arpreq.arp_pa) = his_adr;
-	arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-/*
- * Get the hardware address of an interface on the same subnet
- * as our local address.
- */
-	if (!get_ether_addr(his_adr, &arpreq.arp_ha, proxy_arp_dev,
-			    sizeof(proxy_arp_dev))) {
-	    error("Cannot determine ethernet address for proxy ARP");
-	    return 0;
-	}
-	strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
-	if (ioctl(sock_fd, SIOCSARP, (caddr_t)&arpreq) < 0) {
-	    if ( ! ok_error ( errno ))
-		error("ioctl(SIOCSARP): %m(%d)", errno);
-	    return 0;
-	}
-	proxy_arp_addr = his_adr;
-	has_proxy_arp = 1;
-
-	if (tune_kernel) {
-	    forw_path = path_to_procfs("/sys/net/ipv4/ip_forward");
-	    if (forw_path != 0) {
-		int fd = open(forw_path, O_WRONLY);
-		if (fd >= 0) {
-		    if (write(fd, "1", 1) != 1)
-			error("Couldn't enable IP forwarding: %m");
-		    close(fd);
-		}
-	    }
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-
-int cifproxyarp (int unit, u_int32_t his_adr)
-{
-    struct arpreq arpreq;
-
-    if (has_proxy_arp) {
-	has_proxy_arp = 0;
-	memset (&arpreq, '\0', sizeof(arpreq));
-	SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
-	SIN_ADDR(arpreq.arp_pa) = his_adr;
-	arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-	strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
-	if (ioctl(sock_fd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-	    if ( ! ok_error ( errno ))
-		warn("ioctl(SIOCDARP): %m(%d)", errno);
-	    return 0;
-	}
-    }
-    return 1;
-}
-     
-/********************************************************************
- *
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-
-static int get_ether_addr (u_int32_t ipaddr,
-			   struct sockaddr *hwaddr,
-			   char *name, int namelen)
-{
-    struct ifreq *ifr, *ifend;
-    u_int32_t ina, mask;
-    char *aliasp;
-    struct ifreq ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-    
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
-	if ( ! ok_error ( errno ))
-	    error("ioctl(SIOCGIFCONF): %m(%d)", errno);
-	return 0;
-    }
-
-    SYSDEBUG ((LOG_DEBUG, "proxy arp: scanning %d interfaces for IP %s",
-		ifc.ifc_len / sizeof(struct ifreq), ip_ntoa(ipaddr)));
-/*
- * Scan through looking for an interface with an Internet
- * address on the same subnet as `ipaddr'.
- */
-    ifend = ifs + (ifc.ifc_len / sizeof(struct ifreq));
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-	if (ifr->ifr_addr.sa_family == AF_INET) {
-	    ina = SIN_ADDR(ifr->ifr_addr);
-	    strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-            SYSDEBUG ((LOG_DEBUG, "proxy arp: examining interface %s",
-			ifreq.ifr_name));
-/*
- * Check that the interface is up, and not point-to-point
- * nor loopback.
- */
-	    if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
-		continue;
-
-	    if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
-		continue;
-/*
- * Get its netmask and check that it's on the right subnet.
- */
-	    if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
-	        continue;
-
-	    mask = SIN_ADDR(ifreq.ifr_addr);
-	    SYSDEBUG ((LOG_DEBUG, "proxy arp: interface addr %s mask %lx",
-			ip_ntoa(ina), ntohl(mask)));
-
-	    if (((ipaddr ^ ina) & mask) != 0)
-	        continue;
-	    break;
-	}
-    }
-    
-    if (ifr >= ifend)
-        return 0;
-
-    strlcpy(name, ifreq.ifr_name, namelen);
-
-    /* trim off the :1 in eth0:1 */
-    aliasp = strchr(name, ':');
-    if (aliasp != 0)
-	*aliasp = 0;
-
-    info("found interface %s for proxy arp", name);
-/*
- * Now get the hardware address.
- */
-    memset (&ifreq.ifr_hwaddr, 0, sizeof (struct sockaddr));
-    if (ioctl (sock_fd, SIOCGIFHWADDR, &ifreq) < 0) {
-        error("SIOCGIFHWADDR(%s): %m(%d)", ifreq.ifr_name, errno);
-        return 0;
-    }
-
-    memcpy (hwaddr,
-	    &ifreq.ifr_hwaddr,
-	    sizeof (struct sockaddr));
-
-    SYSDEBUG ((LOG_DEBUG,
-	   "proxy arp: found hwaddr %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
-		(int) ((unsigned char *) &hwaddr->sa_data)[0],
-		(int) ((unsigned char *) &hwaddr->sa_data)[1],
-		(int) ((unsigned char *) &hwaddr->sa_data)[2],
-		(int) ((unsigned char *) &hwaddr->sa_data)[3],
-		(int) ((unsigned char *) &hwaddr->sa_data)[4],
-		(int) ((unsigned char *) &hwaddr->sa_data)[5],
-		(int) ((unsigned char *) &hwaddr->sa_data)[6],
-		(int) ((unsigned char *) &hwaddr->sa_data)[7]));
-    return 1;
-}
-
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *name)
-{
-	struct ifreq ifreq;
-	int ret, sock_fd;
-
-	sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
-	if (sock_fd < 0)
-		return 0;
-	memset(&ifreq.ifr_hwaddr, 0, sizeof(struct sockaddr));
-	strlcpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name));
-	ret = ioctl(sock_fd, SIOCGIFHWADDR, &ifreq);
-	close(sock_fd);
-	if (ret >= 0)
-		memcpy(addr, ifreq.ifr_hwaddr.sa_data, 6);
-	return ret;
-}
-
-/*
- * get_first_ethernet - return the name of the first ethernet-style
- * interface on this system.
- */
-char *
-get_first_ethernet()
-{
-	return "eth0";
-}
-
-/********************************************************************
- *
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'.  If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-
-u_int32_t GetMask (u_int32_t addr)
-{
-    u_int32_t mask, nmask, ina;
-    struct ifreq *ifr, *ifend, ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-
-    addr = ntohl(addr);
-    
-    if (IN_CLASSA(addr))	/* determine network mask for address class */
-	nmask = IN_CLASSA_NET;
-    else if (IN_CLASSB(addr))
-	    nmask = IN_CLASSB_NET;
-    else
-	    nmask = IN_CLASSC_NET;
-    
-    /* class D nets are disallowed by bad_ip_adrs */
-    mask = netmask | htonl(nmask);
-/*
- * Scan through the system's network interfaces.
- */
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
-	if ( ! ok_error ( errno ))
-	    warn("ioctl(SIOCGIFCONF): %m(%d)", errno);
-	return mask;
-    }
-    
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-/*
- * Check the interface's internet address.
- */
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	ina = SIN_ADDR(ifr->ifr_addr);
-	if (((ntohl(ina) ^ addr) & nmask) != 0)
-	    continue;
-/*
- * Check that the interface is up, and not point-to-point nor loopback.
- */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	
-	if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
-	    continue;
-/*
- * Get its netmask and OR it into our mask.
- */
-	if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	mask |= SIN_ADDR(ifreq.ifr_addr);
-	break;
-    }
-    return mask;
-}
-
-/********************************************************************
- *
- * Internal routine to decode the version.modification.patch level
- */
-
-static void decode_version (char *buf, int *version,
-			    int *modification, int *patch)
-{
-    char *endp;
-
-    *version      = (int) strtoul (buf, &endp, 10);
-    *modification = 0;
-    *patch        = 0;
-    
-    if (endp != buf && *endp == '.') {
-	buf = endp + 1;
-	*modification = (int) strtoul (buf, &endp, 10);
-	if (endp != buf && *endp == '.') {
-	    buf = endp + 1;
-	    *patch = (int) strtoul (buf, &buf, 10);
-	}
-    }
-}
-
-/********************************************************************
- *
- * Procedure to determine if the PPP line discipline is registered.
- */
-
-static int
-ppp_registered(void)
-{
-    int local_fd;
-    int mfd = -1;
-    int ret = 0;
-    char slave[16];
-
-    /*
-     * We used to open the serial device and set it to the ppp line
-     * discipline here, in order to create a ppp unit.  But that is
-     * not a good idea - the user might have specified a device that
-     * they can't open (permission, or maybe it doesn't really exist).
-     * So we grab a pty master/slave pair and use that.
-     */
-    if (!get_pty(&mfd, &local_fd, slave, 0)) {
-	no_ppp_msg = "Couldn't determine if PPP is supported (no free ptys)";
-	return 0;
-    }
-
-    /*
-     * Try to put the device into the PPP discipline.
-     */
-    if (ioctl(local_fd, TIOCSETD, &ppp_disc) < 0) {
-	error("ioctl(TIOCSETD(PPP)): %m(%d)", errno);
-    } else
-	ret = 1;
-    
-    close(local_fd);
-    close(mfd);
-    return ret;
-}
-
-/********************************************************************
- *
- * ppp_available - check whether the system has any ppp interfaces
- * (in fact we check whether we can do an ioctl on ppp0).
- */
-
-int ppp_available(void)
-{
-    int s, ok, fd;
-    struct ifreq ifr;
-    int    size;
-    int    my_version, my_modification, my_patch;
-    int osmaj, osmin, ospatch;
-
-    no_ppp_msg = 
-	"This system lacks kernel support for PPP.  This could be because\n"
-	"the PPP kernel module could not be loaded, or because PPP was not\n"
-	"included in the kernel configuration.  If PPP was included as a\n"
-	"module, try `/sbin/modprobe -v ppp'.  If that fails, check that\n"
-	"ppp.o exists in /lib/modules/`uname -r`/net.\n"
-	"See README.linux file in the ppp distribution for more details.\n";
-
-    /* get the kernel version now, since we are called before sys_init */
-    uname(&utsname);
-    osmaj = osmin = ospatch = 0;
-    sscanf(utsname.release, "%d.%d.%d", &osmaj, &osmin, &ospatch);
-    kernel_version = KVERSION(osmaj, osmin, ospatch);
-
-    fd = open("/dev/ppp", O_RDWR);
-#if 0
-    if (fd < 0 && errno == ENOENT) {
-	/* try making it and see if that helps. */
-	if (mknod("/dev/ppp", S_IFCHR | S_IRUSR | S_IWUSR,
-		  makedev(108, 0)) >= 0) {
-	    fd = open("/dev/ppp", O_RDWR);
-	    if (fd >= 0)
-		info("Created /dev/ppp device node");
-	    else
-		unlink("/dev/ppp");	/* didn't work, undo the mknod */
-	} else if (errno == EEXIST) {
-	    fd = open("/dev/ppp", O_RDWR);
-	}
-    }
-#endif /* 0 */
-    if (fd >= 0) {
-	new_style_driver = 1;
-
-	/* XXX should get from driver */
-	driver_version = 2;
-	driver_modification = 4;
-	driver_patch = 0;
-	close(fd);
-	return 1;
-    }
-    if (kernel_version >= KVERSION(2,3,13)) {
-	if (errno == ENOENT)
-	    no_ppp_msg =
-		"pppd is unable to open the /dev/ppp device.\n"
-		"You need to create the /dev/ppp device node by\n"
-		"executing the following command as root:\n"
-		"	mknod /dev/ppp c 108 0\n";
-	return 0;
-    }
-
-/*
- * Open a socket for doing the ioctl operations.
- */    
-    s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s < 0)
-	return 0;
-    
-    strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
-    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-/*
- * If the device did not exist then attempt to create one by putting the
- * current tty into the PPP discipline. If this works then obtain the
- * flags for the device again.
- */
-    if (!ok) {
-	if (ppp_registered()) {
-	    strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
-	    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-	}
-    }
-/*
- * Ensure that the hardware address is for PPP and not something else
- */
-    if (ok)
-        ok = ioctl (s, SIOCGIFHWADDR, (caddr_t) &ifr) >= 0;
-
-    if (ok && ((ifr.ifr_hwaddr.sa_family & ~0xFF) != ARPHRD_PPP))
-        ok = 0;
-
-/*
- *  This is the PPP device. Validate the version of the driver at this
- *  point to ensure that this program will work with the driver.
- */
-    if (ok) {
-	char   abBuffer [1024];
-
-	ifr.ifr_data = abBuffer;
-	size = ioctl (s, SIOCGPPPVER, (caddr_t) &ifr);
-	if (size < 0) {
-	    error("Couldn't read driver version: %m");
-	    ok = 0;
-	    no_ppp_msg = "Sorry, couldn't verify kernel driver version\n";
-
-	} else {
-	    decode_version(abBuffer,
-			   &driver_version,
-			   &driver_modification,
-			   &driver_patch);
-/*
- * Validate the version of the driver against the version that we used.
- */
-	    decode_version(VERSION,
-			   &my_version,
-			   &my_modification,
-			   &my_patch);
-
-	    /* The version numbers must match */
-	    if (driver_version != my_version)
-		ok = 0;
-      
-	    /* The modification levels must be legal */
-	    if (driver_modification < 3) {
-		if (driver_modification >= 2) {
-		    /* we can cope with 2.2.0 and above */
-		    driver_is_old = 1;
-		} else {
-		    ok = 0;
-		}
-	    }
-
-	    close (s);
-	    if (!ok) {
-		slprintf(route_buffer, sizeof(route_buffer),
-			 "Sorry - PPP driver version %d.%d.%d is out of date\n",
-			 driver_version, driver_modification, driver_patch);
-
-		no_ppp_msg = route_buffer;
-	    }
-	}
-    }
-    return ok;
-}
-
-/********************************************************************
- *
- * sifvjcomp - config tcp header compression
- */
-
-int sifvjcomp (int u, int vjcomp, int cidcomp, int maxcid)
-{
-    u_int x = get_flags(ppp_dev_fd);
-
-    if (vjcomp) {
-        if (ioctl (ppp_dev_fd, PPPIOCSMAXCID, (caddr_t) &maxcid) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(PPPIOCSMAXCID): %m(%d)", errno);
-	    vjcomp = 0;
-	}
-    }
-
-    x = vjcomp  ? x | SC_COMP_TCP     : x &~ SC_COMP_TCP;
-    x = cidcomp ? x & ~SC_NO_TCP_CCID : x | SC_NO_TCP_CCID;
-    set_flags (ppp_dev_fd, x);
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifup - Config the interface up and enable IP packets to pass.
- */
-
-int sifup(int u)
-{
-    struct ifreq ifr;
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-
-    ifr.ifr_flags |= (IFF_UP | IFF_POINTOPOINT);
-    if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-    if_is_up++;
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifdown - Disable the indicated protocol and config the interface
- *	     down if there are no remaining protocols.
- */
-
-int sifdown (int u)
-{
-    struct ifreq ifr;
-
-    if (if_is_up && --if_is_up > 0)
-	return 1;
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-
-    ifr.ifr_flags &= ~IFF_UP;
-    ifr.ifr_flags |= IFF_POINTOPOINT;
-    if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-    return 1;
-}
-
-/********************************************************************
- *
- * sifaddr - Config the interface IP addresses and netmask.
- */
-
-int sifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr,
-	     u_int32_t net_mask)
-{
-    struct ifreq   ifr; 
-    struct rtentry rt;
-    
-    memset (&ifr, '\0', sizeof (ifr));
-    memset (&rt,  '\0', sizeof (rt));
-    
-    SET_SA_FAMILY (ifr.ifr_addr,    AF_INET); 
-    SET_SA_FAMILY (ifr.ifr_dstaddr, AF_INET); 
-    SET_SA_FAMILY (ifr.ifr_netmask, AF_INET); 
-
-    strlcpy (ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-/*
- *  Set our IP address
- */
-    SIN_ADDR(ifr.ifr_addr) = our_adr;
-    if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	if (errno != EEXIST) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCSIFADDR): %m(%d)", errno);
-	}
-        else {
-	    warn("ioctl(SIOCSIFADDR): Address already exists");
-	}
-        return (0);
-    }
-/*
- *  Set the gateway address
- */
-    SIN_ADDR(ifr.ifr_dstaddr) = his_adr;
-    if (ioctl(sock_fd, SIOCSIFDSTADDR, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFDSTADDR): %m(%d)", errno); 
-	return (0);
-    } 
-/*
- *  Set the netmask.
- *  For recent kernels, force the netmask to 255.255.255.255.
- */
-    if (kernel_version >= KVERSION(2,1,16))
-	net_mask = ~0L;
-    if (net_mask != 0) {
-	SIN_ADDR(ifr.ifr_netmask) = net_mask;
-	if (ioctl(sock_fd, SIOCSIFNETMASK, (caddr_t) &ifr) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCSIFNETMASK): %m(%d)", errno); 
-	    return (0);
-	} 
-    }
-/*
- *  Add the device route
- */
-    if (kernel_version < KVERSION(2,1,16)) {
-	SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-	SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-	rt.rt_dev = ifname;
-
-	SIN_ADDR(rt.rt_gateway) = 0L;
-	SIN_ADDR(rt.rt_dst)     = his_adr;
-	rt.rt_flags = RTF_UP | RTF_HOST;
-
-	if (kernel_version > KVERSION(2,1,0)) {
-	    SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	    SIN_ADDR(rt.rt_genmask) = -1L;
-	}
-
-	if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCADDRT) device route: %m(%d)", errno);
-	    return (0);
-	}
-    }
-
-    /* set ip_dynaddr in demand mode if address changes */
-    if (demand && tune_kernel && !dynaddr_set
-	&& our_old_addr && our_old_addr != our_adr) {
-	/* set ip_dynaddr if possible */
-	char *path;
-	int fd;
-
-	path = path_to_procfs("/sys/net/ipv4/ip_dynaddr");
-	if (path != 0 && (fd = open(path, O_WRONLY)) >= 0) {
-	    if (write(fd, "1", 1) != 1)
-		error("Couldn't enable dynamic IP addressing: %m");
-	    close(fd);
-	}
-	dynaddr_set = 1;	/* only 1 attempt */
-    }
-    our_old_addr = 0;
-
-    return 1;
-}
-
-/********************************************************************
- *
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-
-int cifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr)
-{
-    struct ifreq ifr;
-
-    if (kernel_version < KVERSION(2,1,16)) {
-/*
- *  Delete the route through the device
- */
-	struct rtentry rt;
-	memset (&rt, '\0', sizeof (rt));
-
-	SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-	SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-	rt.rt_dev = ifname;
-
-	SIN_ADDR(rt.rt_gateway) = 0;
-	SIN_ADDR(rt.rt_dst)     = his_adr;
-	rt.rt_flags = RTF_UP | RTF_HOST;
-
-	if (kernel_version > KVERSION(2,1,0)) {
-	    SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	    SIN_ADDR(rt.rt_genmask) = -1L;
-	}
-
-	if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
-	    if (still_ppp() && ! ok_error (errno))
-		error("ioctl(SIOCDELRT) device route: %m(%d)", errno);
-	    return (0);
-	}
-    }
-
-    /* This way it is possible to have an IPX-only or IPv6-only interface */
-    memset(&ifr, 0, sizeof(ifr));
-    SET_SA_FAMILY(ifr.ifr_addr, AF_INET);
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    
-    if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno)) {
-	    error("ioctl(SIOCSIFADDR): %m(%d)", errno);
-	    return 0;
-	}
-    }
-
-    our_old_addr = our_adr;
-
-    return 1;
-}
-
-#ifdef INET6
-/********************************************************************
- * 
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int sif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
-    struct in6_ifreq ifr6;
-    struct ifreq ifr;
-    struct in6_rtmsg rt6;
-
-    if (sock6_fd < 0) {
-	errno = -sock6_fd;
-	error("IPv6 socket creation failed: %m");
-	return 0;
-    }
-    memset(&ifr, 0, sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
-	error("sif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
-	return 0;
-    }
-    
-    /* Local interface */
-    memset(&ifr6, 0, sizeof(ifr6));
-    IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
-    ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-    ifr6.ifr6_prefixlen = 10;
-
-    if (ioctl(sock6_fd, SIOCSIFADDR, &ifr6) < 0) {
-	error("sif6addr: ioctl(SIOCSIFADDR): %m (%d)", errno);
-	return 0;
-    }
-    
-    /* Route to remote host */
-    memset(&rt6, 0, sizeof(rt6));
-    IN6_LLADDR_FROM_EUI64(rt6.rtmsg_dst, his_eui64);
-    rt6.rtmsg_flags = RTF_UP;
-    rt6.rtmsg_dst_len = 10;
-    rt6.rtmsg_ifindex = ifr.ifr_ifindex;
-    rt6.rtmsg_metric = 1;
-    
-    if (ioctl(sock6_fd, SIOCADDRT, &rt6) < 0) {
-	error("sif6addr: ioctl(SIOCADDRT): %m (%d)", errno);
-	return 0;
-    }
-
-    return 1;
-}
-
-
-/********************************************************************
- *
- * cif6addr - Remove IPv6 address from interface
- */
-int cif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
-    struct ifreq ifr;
-    struct in6_ifreq ifr6;
-
-    if (sock6_fd < 0) {
-	errno = -sock6_fd;
-	error("IPv6 socket creation failed: %m");
-	return 0;
-    }
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
-	error("cif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
-	return 0;
-    }
-    
-    memset(&ifr6, 0, sizeof(ifr6));
-    IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
-    ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-    ifr6.ifr6_prefixlen = 10;
-
-    if (ioctl(sock6_fd, SIOCDIFADDR, &ifr6) < 0) {
-	if (errno != EADDRNOTAVAIL) {
-	    if (! ok_error (errno))
-		error("cif6addr: ioctl(SIOCDIFADDR): %m (%d)", errno);
-	}
-        else {
-	    warn("cif6addr: ioctl(SIOCDIFADDR): No such address");
-	}
-        return (0);
-    }
-    return 1;
-}
-#endif /* INET6 */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given.  Assumes slave_name points to >= 16 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
-    int *master_fdp;
-    int *slave_fdp;
-    char *slave_name;
-    int uid;
-{
-    int i, mfd, sfd = -1;
-    char pty_name[16];
-    struct termios tios;
-
-#ifdef TIOCGPTN
-    /*
-     * Try the unix98 way first.
-     */
-    mfd = open("/dev/ptmx", O_RDWR);
-    if (mfd >= 0) {
-	int ptn;
-	if (ioctl(mfd, TIOCGPTN, &ptn) >= 0) {
-	    slprintf(pty_name, sizeof(pty_name), "/dev/pts/%d", ptn);
-	    chmod(pty_name, S_IRUSR | S_IWUSR);
-#ifdef TIOCSPTLCK
-	    ptn = 0;
-	    if (ioctl(mfd, TIOCSPTLCK, &ptn) < 0)
-		warn("Couldn't unlock pty slave %s: %m", pty_name);
-#endif
-	    if ((sfd = open(pty_name, O_RDWR | O_NOCTTY)) < 0)
-		warn("Couldn't open pty slave %s: %m", pty_name);
-	}
-    }
-#endif /* TIOCGPTN */
-
-    if (sfd < 0) {
-	/* the old way - scan through the pty name space */
-	for (i = 0; i < 64; ++i) {
-	    slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
-		     'p' + i / 16, i % 16);
-	    mfd = open(pty_name, O_RDWR, 0);
-	    if (mfd >= 0) {
-		pty_name[5] = 't';
-		sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
-		if (sfd >= 0) {
-		    fchown(sfd, uid, -1);
-		    fchmod(sfd, S_IRUSR | S_IWUSR);
-		    break;
-		}
-		close(mfd);
-	    }
-	}
-    }
-
-    if (sfd < 0)
-	return 0;
-
-    strlcpy(slave_name, pty_name, 16);
-    *master_fdp = mfd;
-    *slave_fdp = sfd;
-    if (tcgetattr(sfd, &tios) == 0) {
-	tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
-	tios.c_cflag |= CS8 | CREAD | CLOCAL;
-	tios.c_iflag  = IGNPAR;
-	tios.c_oflag  = 0;
-	tios.c_lflag  = 0;
-	if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
-	    warn("couldn't set attributes on pty: %m");
-    } else
-	warn("couldn't get attributes on pty: %m");
-
-    return 1;
-}
-
-/********************************************************************
- *
- * open_loopback - open the device we use for getting packets
- * in demand mode.  Under Linux, we use a pty master/slave pair.
- */
-int
-open_ppp_loopback(void)
-{
-    int flags;
-
-    looped = 1;
-    if (new_style_driver) {
-	/* allocate ourselves a ppp unit */
-	if (make_ppp_unit() < 0)
-	    die(1);
-	set_flags(ppp_dev_fd, SC_LOOP_TRAFFIC);
-	set_kdebugflag(kdebugflag);
-	ppp_fd = -1;
-	return ppp_dev_fd;
-    }
-
-    if (!get_pty(&master_fd, &slave_fd, loop_name, 0))
-	fatal("No free pty for loopback");
-    SYSDEBUG(("using %s for loopback", loop_name));
-
-    set_ppp_fd(slave_fd);
-
-    flags = fcntl(master_fd, F_GETFL);
-    if (flags == -1 ||
-	fcntl(master_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set master loopback to nonblock: %m(%d)", errno);
-
-    flags = fcntl(ppp_fd, F_GETFL);
-    if (flags == -1 ||
-	fcntl(ppp_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set slave loopback to nonblock: %m(%d)", errno);
-
-    if (ioctl(ppp_fd, TIOCSETD, &ppp_disc) < 0)
-	fatal("ioctl(TIOCSETD): %m(%d)", errno);
-/*
- * Find out which interface we were given.
- */
-    if (ioctl(ppp_fd, PPPIOCGUNIT, &ifunit) < 0)
-	fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-/*
- * Enable debug in the driver if requested.
- */
-    set_kdebugflag (kdebugflag);
-
-    return master_fd;
-}
-
-/********************************************************************
- *
- * restore_loop - reattach the ppp unit to the loopback.
- *
- * The kernel ppp driver automatically reattaches the ppp unit to
- * the loopback if the serial port is set to a line discipline other
- * than ppp, or if it detects a modem hangup.  The former will happen
- * in disestablish_ppp if the latter hasn't already happened, so we
- * shouldn't need to do anything.
- *
- * Just to be sure, set the real serial port to the normal discipline.
- */
-
-static void
-restore_loop(void)
-{
-    looped = 1;
-    if (new_style_driver) {
-	set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_LOOP_TRAFFIC);
-	return;
-    }
-    if (ppp_fd != slave_fd) {
-	(void) ioctl(ppp_fd, TIOCSETD, &tty_disc);
-	set_ppp_fd(slave_fd);
-    }
-}
-
-/********************************************************************
- *
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-
-int
-sifnpmode(u, proto, mode)
-    int u;
-    int proto;
-    enum NPmode mode;
-{
-    struct npioctl npi;
-
-    npi.protocol = proto;
-    npi.mode     = mode;
-    if (ioctl(ppp_dev_fd, PPPIOCSNPMODE, (caddr_t) &npi) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(PPPIOCSNPMODE, %d, %d): %m (%d)",
-		   proto, mode, errno);
-	return 0;
-    }
-    return 1;
-}
-
-
-/********************************************************************
- *
- * sipxfaddr - Config the interface IPX networknumber
- */
-
-int sipxfaddr (int unit, unsigned long int network, unsigned char * node )
-{
-    int    result = 1;
-
-#ifdef IPX_CHANGE
-    int    skfd; 
-    struct ifreq         ifr;
-    struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
-    skfd = socket (AF_IPX, SOCK_DGRAM, 0);
-    if (skfd < 0) { 
-	if (! ok_error (errno))
-	    dbglog("socket(AF_IPX): %m (%d)", errno);
-	result = 0;
-    }
-    else {
-	memset (&ifr, '\0', sizeof (ifr));
-	strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
-	memcpy (sipx->sipx_node, node, IPX_NODE_LEN);
-	sipx->sipx_family  = AF_IPX;
-	sipx->sipx_port    = 0;
-	sipx->sipx_network = htonl (network);
-	sipx->sipx_type    = IPX_FRAME_ETHERII;
-	sipx->sipx_action  = IPX_CRTITF;
-/*
- *  Set the IPX device
- */
-	if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	    result = 0;
-	    if (errno != EEXIST) {
-		if (! ok_error (errno))
-		    dbglog("ioctl(SIOCSIFADDR, CRTITF): %m (%d)", errno);
-	    }
-	    else {
-		warn("ioctl(SIOCSIFADDR, CRTITF): Address already exists");
-	    }
-	}
-	close (skfd);
-    }
-#endif
-    return result;
-}
-
-/********************************************************************
- *
- * cipxfaddr - Clear the information for the IPX network. The IPX routes
- *	       are removed and the device is no longer able to pass IPX
- *	       frames.
- */
-
-int cipxfaddr (int unit)
-{
-    int    result = 1;
-
-#ifdef IPX_CHANGE
-    int    skfd; 
-    struct ifreq         ifr;
-    struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
-    skfd = socket (AF_IPX, SOCK_DGRAM, 0);
-    if (skfd < 0) { 
-	if (! ok_error (errno))
-	    dbglog("socket(AF_IPX): %m (%d)", errno);
-	result = 0;
-    }
-    else {
-	memset (&ifr, '\0', sizeof (ifr));
-	strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
-	sipx->sipx_type    = IPX_FRAME_ETHERII;
-	sipx->sipx_action  = IPX_DLTITF;
-	sipx->sipx_family  = AF_IPX;
-/*
- *  Set the IPX device
- */
-	if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	    if (! ok_error (errno))
-		info("ioctl(SIOCSIFADDR, IPX_DLTITF): %m (%d)", errno);
-	    result = 0;
-	}
-	close (skfd);
-    }
-#endif
-    return result;
-}
-
-/*
- * Use the hostname as part of the random number seed.
- */
-int
-get_host_seed()
-{
-    int h;
-    char *p = hostname;
-
-    h = 407;
-    for (p = hostname; *p != 0; ++p)
-	h = h * 37 + *p;
-    return h;
-}
-
-/********************************************************************
- *
- * sys_check_options - check the options that the user specified
- */
-
-int
-sys_check_options(void)
-{
-#ifdef IPX_CHANGE
-/*
- * Disable the IPX protocol if the support is not present in the kernel.
- */
-    char *path;
-
-    if (ipxcp_protent.enabled_flag) {
-	struct stat stat_buf;
-        if ((path = path_to_procfs("/net/ipx_interface")) == 0
-	    || lstat(path, &stat_buf) < 0) {
-	    error("IPX support is not present in the kernel\n");
-	    ipxcp_protent.enabled_flag = 0;
-	}
-    }
-#endif
-    if (demand && driver_is_old) {
-	option_error("demand dialling is not supported by kernel driver "
-		     "version %d.%d.%d", driver_version, driver_modification,
-		     driver_patch);
-	return 0;
-    }
-    if (multilink && !new_style_driver) {
-	warn("Warning: multilink is not supported by the kernel driver");
-	multilink = 0;
-    }
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-linux.c.wtmp b/mdk-stage1/ppp/pppd/sys-linux.c.wtmp
deleted file mode 100644
index f1b48423e..000000000
--- a/mdk-stage1/ppp/pppd/sys-linux.c.wtmp
+++ /dev/null
@@ -1,2750 +0,0 @@
-/*
- * sys-linux.c - System-dependent procedures for setting up
- * PPP interfaces on Linux systems
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/errno.h>
-#include <sys/file.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/sysmacros.h>
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <syslog.h>
-#include <string.h>
-#include <time.h>
-#include <memory.h>
-#include <utmp.h>
-#include <mntent.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <ctype.h>
-#include <termios.h>
-#include <unistd.h>
-
-/* This is in netdevice.h. However, this compile will fail miserably if
-   you attempt to include netdevice.h because it has so many references
-   to __memcpy functions which it should not attempt to do. So, since I
-   really don't use it, but it must be defined, define it now. */
-
-#ifndef MAX_ADDR_LEN
-#define MAX_ADDR_LEN 7
-#endif
-
-#if __GLIBC__ >= 2
-#include <asm/types.h>		/* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <netinet/if_ether.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#include <linux/if_arp.h>
-#include <linux/route.h>
-#include <linux/if_ether.h>
-#endif
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "ipcp.h"
-
-#ifdef IPX_CHANGE
-#include "ipxcp.h"
-#if __GLIBC__ >= 2 && \
-    !(defined(__powerpc__) && __GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-#include <netipx/ipx.h>
-#else
-#include <linux/ipx.h>
-#endif
-#endif /* IPX_CHANGE */
-
-#ifdef PPP_FILTER
-#include <net/bpf.h>
-#include <linux/filter.h>
-#endif /* PPP_FILTER */
-
-#ifdef LOCKLIB
-#include <sys/locks.h>
-#endif
-
-#ifdef INET6
-#ifndef _LINUX_IN6_H
-/*
- *    This is in linux/include/net/ipv6.h.
- */
-
-struct in6_ifreq {
-    struct in6_addr ifr6_addr;
-    __u32 ifr6_prefixlen;
-    unsigned int ifr6_ifindex;
-};
-#endif
-
-#define IN6_LLADDR_FROM_EUI64(sin6, eui64) do {			\
-	memset(&sin6.s6_addr, 0, sizeof(struct in6_addr));	\
-	sin6.s6_addr16[0] = htons(0xfe80); 			\
-	eui64_copy(eui64, sin6.s6_addr32[2]);			\
-	} while (0)
-
-#endif /* INET6 */
-
-/* We can get an EIO error on an ioctl if the modem has hung up */
-#define ok_error(num) ((num)==EIO)
-
-static int tty_disc = N_TTY;	/* The TTY discipline */
-static int ppp_disc = N_PPP;	/* The PPP discpline */
-static int initfdflags = -1;	/* Initial file descriptor flags for fd */
-static int ppp_fd = -1;		/* fd which is set to PPP discipline */
-static int sock_fd = -1;	/* socket for doing interface ioctls */
-static int slave_fd = -1;
-static int master_fd = -1;
-#ifdef INET6
-static int sock6_fd = -1;
-#endif /* INET6 */
-static int ppp_dev_fd = -1;	/* fd for /dev/ppp (new style driver) */
-static int chindex;		/* channel index (new style driver) */
-
-static fd_set in_fds;		/* set of fds that wait_input waits for */
-static int max_in_fd;		/* highest fd set in in_fds */
-
-static int has_proxy_arp       = 0;
-static int driver_version      = 0;
-static int driver_modification = 0;
-static int driver_patch        = 0;
-static int driver_is_old       = 0;
-static int restore_term        = 0;	/* 1 => we've munged the terminal */
-static struct termios inittermios;	/* Initial TTY termios */
-
-static int new_style_driver = 0;
-
-static char loop_name[20];
-static unsigned char inbuf[512]; /* buffer for chars read from loopback */
-
-static int	if_is_up;	/* Interface has been marked up */
-static u_int32_t default_route_gateway;	/* Gateway for default route added */
-static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
-static char proxy_arp_dev[16];		/* Device for proxy arp entry */
-static u_int32_t our_old_addr;		/* for detecting address changes */
-static int	dynaddr_set;		/* 1 if ip_dynaddr set */
-static int	looped;			/* 1 if using loop */
-static int	link_mtu;		/* mtu for the link (not bundle) */
-
-static struct utsname utsname;	/* for the kernel version */
-static int kernel_version;
-#define KVERSION(j,n,p)	((j)*1000000 + (n)*1000 + (p))
-
-#define MAX_IFS		100
-
-#define FLAGS_GOOD (IFF_UP          | IFF_BROADCAST)
-#define FLAGS_MASK (IFF_UP          | IFF_BROADCAST | \
-		    IFF_POINTOPOINT | IFF_LOOPBACK  | IFF_NOARP)
-
-#define SIN_ADDR(x)	(((struct sockaddr_in *) (&(x)))->sin_addr.s_addr)
-
-/* Prototypes for procedures local to this file. */
-static int get_flags (int fd);
-static void set_flags (int fd, int flags);
-static int translate_speed (int bps);
-static int baud_rate_of (int speed);
-static void close_route_table (void);
-static int open_route_table (void);
-static int read_route_table (struct rtentry *rt);
-static int defaultroute_exists (struct rtentry *rt);
-static int get_ether_addr (u_int32_t ipaddr, struct sockaddr *hwaddr,
-			   char *name, int namelen);
-static void decode_version (char *buf, int *version, int *mod, int *patch);
-static int set_kdebugflag(int level);
-static int ppp_registered(void);
-static int make_ppp_unit(void);
-static void restore_loop(void);	/* Transfer ppp unit back to loopback */
-
-extern u_char	inpacket_buf[];	/* borrowed from main.c */
-
-/*
- * SET_SA_FAMILY - set the sa_family field of a struct sockaddr,
- * if it exists.
- */
-
-#define SET_SA_FAMILY(addr, family)			\
-    memset ((char *) &(addr), '\0', sizeof(addr));	\
-    addr.sa_family = (family);
-
-/*
- * Determine if the PPP connection should still be present.
- */
-
-extern int hungup;
-
-/* new_fd is the fd of a tty */
-static void set_ppp_fd (int new_fd)
-{
-	SYSDEBUG ((LOG_DEBUG, "setting ppp_fd to %d\n", new_fd));
-	ppp_fd = new_fd;
-	if (!new_style_driver)
-		ppp_dev_fd = new_fd;
-}
-
-static int still_ppp(void)
-{
-	if (new_style_driver)
-		return !hungup && ppp_fd >= 0;
-	if (!hungup || ppp_fd == slave_fd)
-		return 1;
-	if (slave_fd >= 0) {
-		set_ppp_fd(slave_fd);
-		return 1;
-	}
-	return 0;
-}
-
-/********************************************************************
- *
- * Functions to read and set the flags value in the device driver
- */
-
-static int get_flags (int fd)
-{    
-    int flags;
-
-    if (ioctl(fd, PPPIOCGFLAGS, (caddr_t) &flags) < 0) {
-	if ( ok_error (errno) )
-	    flags = 0;
-	else
-	    fatal("ioctl(PPPIOCGFLAGS): %m");
-    }
-
-    SYSDEBUG ((LOG_DEBUG, "get flags = %x\n", flags));
-    return flags;
-}
-
-/********************************************************************/
-
-static void set_flags (int fd, int flags)
-{    
-    SYSDEBUG ((LOG_DEBUG, "set flags = %x\n", flags));
-
-    if (ioctl(fd, PPPIOCSFLAGS, (caddr_t) &flags) < 0) {
-	if (! ok_error (errno) )
-	    fatal("ioctl(PPPIOCSFLAGS, %x): %m", flags, errno);
-    }
-}
-
-/********************************************************************
- *
- * sys_init - System-dependent initialization.
- */
-
-void sys_init(void)
-{
-    int flags;
-
-    if (new_style_driver) {
-	ppp_dev_fd = open("/dev/ppp", O_RDWR);
-	if (ppp_dev_fd < 0)
-	    fatal("Couldn't open /dev/ppp: %m");
-	flags = fcntl(ppp_dev_fd, F_GETFL);
-	if (flags == -1
-	    || fcntl(ppp_dev_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("Couldn't set /dev/ppp to nonblock: %m");
-    }
-
-    /* Get an internet socket for doing socket ioctls. */
-    sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (sock_fd < 0)
-	fatal("Couldn't create IP socket: %m(%d)", errno);
-
-#ifdef INET6
-    sock6_fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (sock6_fd < 0)
-	sock6_fd = -errno;	/* save errno for later */
-#endif
-
-    FD_ZERO(&in_fds);
-    max_in_fd = 0;
-}
-
-/********************************************************************
- *
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-
-void sys_cleanup(void)
-{
-/*
- * Take down the device
- */
-    if (if_is_up) {
-	if_is_up = 0;
-	sifdown(0);
-    }
-/*
- * Delete any routes through the device.
- */
-    if (default_route_gateway != 0)
-	cifdefaultroute(0, 0, default_route_gateway);
-
-    if (has_proxy_arp)
-	cifproxyarp(0, proxy_arp_addr);
-}
-
-/********************************************************************
- *
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close(void)
-{
-    if (new_style_driver)
-	close(ppp_dev_fd);
-    if (sock_fd >= 0)
-	close(sock_fd);
-    if (slave_fd >= 0)
-	close(slave_fd);
-    if (master_fd >= 0)
-	close(master_fd);
-    closelog();
-}
-
-/********************************************************************
- *
- * set_kdebugflag - Define the debugging level for the kernel
- */
-
-static int set_kdebugflag (int requested_level)
-{
-    if (new_style_driver && ifunit < 0)
-	return 1;
-    if (ioctl(ppp_dev_fd, PPPIOCSDEBUG, &requested_level) < 0) {
-	if ( ! ok_error (errno) )
-	    error("ioctl(PPPIOCSDEBUG): %m");
-	return (0);
-    }
-    SYSDEBUG ((LOG_INFO, "set kernel debugging level to %d",
-		requested_level));
-    return (1);
-}
-
-/********************************************************************
- *
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-
-int tty_establish_ppp (int tty_fd)
-{
-    int x;
-    int fd = -1;
-
-/*
- * Ensure that the tty device is in exclusive mode.
- */
-    if (ioctl(tty_fd, TIOCEXCL, 0) < 0) {
-	if ( ! ok_error ( errno ))
-	    warn("Couldn't make tty exclusive: %m");
-    }
-/*
- * Demand mode - prime the old ppp device to relinquish the unit.
- */
-    if (!new_style_driver && looped
-	&& ioctl(slave_fd, PPPIOCXFERUNIT, 0) < 0) {
-	error("ioctl(transfer ppp unit): %m");
-	return -1;
-    }
-/*
- * Set the current tty to the PPP discpline
- */
-
-#ifndef N_SYNC_PPP
-#define N_SYNC_PPP 14
-#endif
-    ppp_disc = (new_style_driver && sync_serial)? N_SYNC_PPP: N_PPP;
-    if (ioctl(tty_fd, TIOCSETD, &ppp_disc) < 0) {
-	if ( ! ok_error (errno) ) {
-	    error("Couldn't set tty to PPP discipline: %m");
-	    return -1;
-	}
-    }
-
-    if (new_style_driver) {
-	/* Open another instance of /dev/ppp and connect the channel to it */
-	int flags;
-
-	if (ioctl(tty_fd, PPPIOCGCHAN, &chindex) == -1) {
-	    error("Couldn't get channel number: %m");
-	    goto err;
-	}
-	dbglog("using channel %d", chindex);
-	fd = open("/dev/ppp", O_RDWR);
-	if (fd < 0) {
-	    error("Couldn't reopen /dev/ppp: %m");
-	    goto err;
-	}
-	if (ioctl(fd, PPPIOCATTCHAN, &chindex) < 0) {
-	    error("Couldn't attach to channel %d: %m", chindex);
-	    goto err_close;
-	}
-	flags = fcntl(fd, F_GETFL);
-	if (flags == -1 || fcntl(fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("Couldn't set /dev/ppp (channel) to nonblock: %m");
-	set_ppp_fd(fd);
-
-	if (!looped)
-	    ifunit = -1;
-	if (!looped && !multilink) {
-	    /*
-	     * Create a new PPP unit.
-	     */
-	    if (make_ppp_unit() < 0)
-		goto err_close;
-	}
-
-	if (looped)
-	    set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) & ~SC_LOOP_TRAFFIC);
-
-	if (!multilink) {
-	    add_fd(ppp_dev_fd);
-	    if (ioctl(fd, PPPIOCCONNECT, &ifunit) < 0) {
-		error("Couldn't attach to PPP unit %d: %m", ifunit);
-		goto err_close;
-	    }
-	}
-
-    } else {
-	/*
-	 * Old-style driver: find out which interface we were given.
-	 */
-	set_ppp_fd (tty_fd);
-	if (ioctl(tty_fd, PPPIOCGUNIT, &x) < 0) {	
-	    if (ok_error (errno))
-		goto err;
-	    fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-	}
-	/* Check that we got the same unit again. */
-	if (looped && x != ifunit)
-	    fatal("transfer_ppp failed: wanted unit %d, got %d", ifunit, x);
-	ifunit = x;
-
-	/*
-	 * Fetch the initial file flags and reset blocking mode on the file.
-	 */
-	initfdflags = fcntl(tty_fd, F_GETFL);
-	if (initfdflags == -1 ||
-	    fcntl(tty_fd, F_SETFL, initfdflags | O_NONBLOCK) == -1) {
-	    if ( ! ok_error (errno))
-		warn("Couldn't set device to non-blocking mode: %m");
-	}
-    }
-
-    looped = 0;
-
-    /*
-     * Enable debug in the driver if requested.
-     */
-    if (!looped)
-	set_kdebugflag (kdebugflag);
-
-#define SC_RCVB	(SC_RCV_B7_0 | SC_RCV_B7_1 | SC_RCV_EVNP | SC_RCV_ODDP)
-#define SC_LOGB	(SC_DEBUG | SC_LOG_INPKT | SC_LOG_OUTPKT | SC_LOG_RAWIN \
-		 | SC_LOG_FLUSH)
-
-    set_flags(ppp_fd, ((get_flags(ppp_fd) & ~(SC_RCVB | SC_LOGB))
-		       | ((kdebugflag * SC_DEBUG) & SC_LOGB)));
-
-    SYSDEBUG ((LOG_NOTICE, "Using version %d.%d.%d of PPP driver",
-	    driver_version, driver_modification, driver_patch));
-
-    return ppp_fd;
-
- err_close:
-    close(fd);
- err:
-    if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0 && !ok_error(errno))
-	warn("Couldn't reset tty to normal line discipline: %m");
-    return -1;
-}
-
-/********************************************************************
- *
- * tty_disestablish_ppp - Restore the serial port to normal operation,
- * and reconnect the ppp unit to the loopback if in demand mode.
- * This shouldn't call die() because it's called from die().
- */
-
-void tty_disestablish_ppp(int tty_fd)
-{
-    if (demand)
-	restore_loop();
-    if (!hungup) {
-/*
- * Flush the tty output buffer so that the TIOCSETD doesn't hang.
- */
-	if (tcflush(tty_fd, TCIOFLUSH) < 0)
-	    warn("tcflush failed: %m");
-/*
- * Restore the previous line discipline
- */
-	if (ioctl(tty_fd, TIOCSETD, &tty_disc) < 0) {
-	    if ( ! ok_error (errno))
-		error("ioctl(TIOCSETD, N_TTY): %m");
-	}
-	
-	if (ioctl(tty_fd, TIOCNXCL, 0) < 0) {
-	    if ( ! ok_error (errno))
-		warn("ioctl(TIOCNXCL): %m(%d)", errno);
-	}
-
-	/* Reset non-blocking mode on fd. */
-	if (initfdflags != -1 && fcntl(tty_fd, F_SETFL, initfdflags) < 0) {
-	    if ( ! ok_error (errno))
-		warn("Couldn't restore device fd flags: %m");
-	}
-    }
-    initfdflags = -1;
-
-    if (new_style_driver) {
-	close(ppp_fd);
-	ppp_fd = -1;
-	if (!looped && ifunit >= 0 && ioctl(ppp_dev_fd, PPPIOCDETACH) < 0)
-	    error("Couldn't release PPP unit: %m");
-	if (!multilink)
-	    remove_fd(ppp_dev_fd);
-    }
-}
-
-/*
- * make_ppp_unit - make a new ppp unit for ppp_dev_fd.
- * Assumes new_style_driver.
- */
-static int make_ppp_unit()
-{
-	int x;
-
-	ifunit = req_unit;
-	x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
-	if (x < 0 && req_unit >= 0 && errno == EEXIST) {
-		warn("Couldn't allocate PPP unit %d as it is already in use");
-		ifunit = -1;
-		x = ioctl(ppp_dev_fd, PPPIOCNEWUNIT, &ifunit);
-	}
-	if (x < 0)
-		error("Couldn't create new ppp unit: %m");
-	return x;
-}
-
-/*
- * cfg_bundle - configure the existing bundle.
- * Used in demand mode.
- */
-void cfg_bundle(int mrru, int mtru, int rssn, int tssn)
-{
-	int flags;
-
-	if (!new_style_driver)
-		return;
-
-	/* set the mrru, mtu and flags */
-	if (ioctl(ppp_dev_fd, PPPIOCSMRRU, &mrru) < 0)
-		error("Couldn't set MRRU: %m");
-	flags = get_flags(ppp_dev_fd);
-	flags &= ~(SC_MP_SHORTSEQ | SC_MP_XSHORTSEQ);
-	flags |= (rssn? SC_MP_SHORTSEQ: 0) | (tssn? SC_MP_XSHORTSEQ: 0)
-		| (mrru? SC_MULTILINK: 0);
-
-	set_flags(ppp_dev_fd, flags);
-
-	/* connect up the channel */
-	if (ioctl(ppp_fd, PPPIOCCONNECT, &ifunit) < 0)
-		fatal("Couldn't attach to PPP unit %d: %m", ifunit);
-	add_fd(ppp_dev_fd);
-}
-
-/*
- * make_new_bundle - create a new PPP unit (i.e. a bundle)
- * and connect our channel to it.  This should only get called
- * if `multilink' was set at the time establish_ppp was called.
- * In demand mode this uses our existing bundle instead of making
- * a new one.
- */
-void make_new_bundle(int mrru, int mtru, int rssn, int tssn)
-{
-	if (!new_style_driver)
-		return;
-
-	/* make us a ppp unit */
-	if (make_ppp_unit() < 0)
-		die(1);
-
-	/* set the mrru and flags */
-	cfg_bundle(mrru, mtru, rssn, tssn);
-}
-
-/*
- * bundle_attach - attach our link to a given PPP unit.
- * We assume the unit is controlled by another pppd.
- */
-int bundle_attach(int ifnum)
-{
-	if (!new_style_driver)
-		return -1;
-
-	if (ioctl(ppp_dev_fd, PPPIOCATTACH, &ifnum) < 0) {
-		if (errno == ENXIO)
-			return 0;	/* doesn't still exist */
-		fatal("Couldn't attach to interface unit %d: %m\n", ifnum);
-	}
-	if (ioctl(ppp_fd, PPPIOCCONNECT, &ifnum) < 0)
-		fatal("Couldn't connect to interface unit %d: %m", ifnum);
-	set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_MULTILINK);
-
-	ifunit = ifnum;
-	return 1;
-}
-
-/********************************************************************
- *
- * clean_check - Fetch the flags for the device and generate
- * appropriate error messages.
- */
-void clean_check(void)
-{
-    int x;
-    char *s;
-
-    if (still_ppp()) {
-	if (ioctl(ppp_fd, PPPIOCGFLAGS, (caddr_t) &x) == 0) {
-	    s = NULL;
-	    switch (~x & (SC_RCV_B7_0|SC_RCV_B7_1|SC_RCV_EVNP|SC_RCV_ODDP)) {
-	    case SC_RCV_B7_0:
-		s = "all had bit 7 set to 1";
-		break;
-		
-	    case SC_RCV_B7_1:
-		s = "all had bit 7 set to 0";
-		break;
-		
-	    case SC_RCV_EVNP:
-		s = "all had odd parity";
-		break;
-		
-	    case SC_RCV_ODDP:
-		s = "all had even parity";
-		break;
-	    }
-	    
-	    if (s != NULL) {
-		warn("Receive serial link is not 8-bit clean:");
-		warn("Problem: %s", s);
-	    }
-	}
-    }
-}
-	
-
-/*
- * List of valid speeds.
- */
-
-struct speed {
-    int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
-    { 50, B50 },
-#endif
-#ifdef B75
-    { 75, B75 },
-#endif
-#ifdef B110
-    { 110, B110 },
-#endif
-#ifdef B134
-    { 134, B134 },
-#endif
-#ifdef B150
-    { 150, B150 },
-#endif
-#ifdef B200
-    { 200, B200 },
-#endif
-#ifdef B300
-    { 300, B300 },
-#endif
-#ifdef B600
-    { 600, B600 },
-#endif
-#ifdef B1200
-    { 1200, B1200 },
-#endif
-#ifdef B1800
-    { 1800, B1800 },
-#endif
-#ifdef B2000
-    { 2000, B2000 },
-#endif
-#ifdef B2400
-    { 2400, B2400 },
-#endif
-#ifdef B3600
-    { 3600, B3600 },
-#endif
-#ifdef B4800
-    { 4800, B4800 },
-#endif
-#ifdef B7200
-    { 7200, B7200 },
-#endif
-#ifdef B9600
-    { 9600, B9600 },
-#endif
-#ifdef B19200
-    { 19200, B19200 },
-#endif
-#ifdef B38400
-    { 38400, B38400 },
-#endif
-#ifdef B57600
-    { 57600, B57600 },
-#endif
-#ifdef B76800
-    { 76800, B76800 },
-#endif
-#ifdef B115200
-    { 115200, B115200 },
-#endif
-#ifdef EXTA
-    { 19200, EXTA },
-#endif
-#ifdef EXTB
-    { 38400, EXTB },
-#endif
-#ifdef B230400
-    { 230400, B230400 },
-#endif
-#ifdef B460800
-    { 460800, B460800 },
-#endif
-#ifdef B921600
-    { 921600, B921600 },
-#endif
-    { 0, 0 }
-};
-
-/********************************************************************
- *
- * Translate from bits/second to a speed_t.
- */
-
-static int translate_speed (int bps)
-{
-    struct speed *speedp;
-
-    if (bps != 0) {
-	for (speedp = speeds; speedp->speed_int; speedp++) {
-	    if (bps == speedp->speed_int)
-		return speedp->speed_val;
-	}
-	warn("speed %d not supported", bps);
-    }
-    return 0;
-}
-
-/********************************************************************
- *
- * Translate from a speed_t to bits/second.
- */
-
-static int baud_rate_of (int speed)
-{
-    struct speed *speedp;
-    
-    if (speed != 0) {
-	for (speedp = speeds; speedp->speed_int; speedp++) {
-	    if (speed == speedp->speed_val)
-		return speedp->speed_int;
-	}
-    }
-    return 0;
-}
-
-/********************************************************************
- *
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.  If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-
-void set_up_tty(int tty_fd, int local)
-{
-    int speed;
-    struct termios tios;
-
-    setdtr(tty_fd, 1);
-    if (tcgetattr(tty_fd, &tios) < 0) {
-	if (!ok_error(errno))
-	    fatal("tcgetattr: %m(%d)", errno);
-	return;
-    }
-    
-    if (!restore_term)
-	inittermios = tios;
-    
-    tios.c_cflag     &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-    tios.c_cflag     |= CS8 | CREAD | HUPCL;
-
-    tios.c_iflag      = IGNBRK | IGNPAR;
-    tios.c_oflag      = 0;
-    tios.c_lflag      = 0;
-    tios.c_cc[VMIN]   = 1;
-    tios.c_cc[VTIME]  = 0;
-    
-    if (local || !modem)
-	tios.c_cflag ^= (CLOCAL | HUPCL);
-
-    switch (crtscts) {
-    case 1:
-	tios.c_cflag |= CRTSCTS;
-	break;
-
-    case -2:
-	tios.c_iflag     |= IXON | IXOFF;
-	tios.c_cc[VSTOP]  = 0x13;	/* DC3 = XOFF = ^S */
-	tios.c_cc[VSTART] = 0x11;	/* DC1 = XON  = ^Q */
-	break;
-
-    case -1:
-	tios.c_cflag &= ~CRTSCTS;
-	break;
-
-    default:
-	break;
-    }
-    
-    speed = translate_speed(inspeed);
-    if (speed) {
-	cfsetospeed (&tios, speed);
-	cfsetispeed (&tios, speed);
-    }
-/*
- * We can't proceed if the serial port speed is B0,
- * since that implies that the serial port is disabled.
- */
-    else {
-	speed = cfgetospeed(&tios);
-	if (speed == B0)
-	    fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
-    }
-
-    if (tcsetattr(tty_fd, TCSAFLUSH, &tios) < 0)
-	if (!ok_error(errno))
-	    fatal("tcsetattr: %m");
-    
-    baud_rate    = baud_rate_of(speed);
-    restore_term = 1;
-}
-
-/********************************************************************
- *
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-
-void setdtr (int tty_fd, int on)
-{
-    int modembits = TIOCM_DTR;
-
-    ioctl(tty_fd, (on ? TIOCMBIS : TIOCMBIC), &modembits);
-}
-
-/********************************************************************
- *
- * restore_tty - restore the terminal to the saved settings.
- */
-
-void restore_tty (int tty_fd)
-{
-    if (restore_term) {
-	restore_term = 0;
-/*
- * Turn off echoing, because otherwise we can get into
- * a loop with the tty and the modem echoing to each other.
- * We presume we are the sole user of this tty device, so
- * when we close it, it will revert to its defaults anyway.
- */
-	if (!default_device)
-	    inittermios.c_lflag &= ~(ECHO | ECHONL);
-	
-	if (tcsetattr(tty_fd, TCSAFLUSH, &inittermios) < 0) {
-	    if (! ok_error (errno))
-		warn("tcsetattr: %m");
-	}
-    }
-}
-
-/********************************************************************
- *
- * output - Output PPP packet.
- */
-
-void output (int unit, unsigned char *p, int len)
-{
-    int fd = ppp_fd;
-    int proto;
-
-    if (debug)
-	dbglog("sent %P", p, len);
-
-    if (len < PPP_HDRLEN)
-	return;
-    if (new_style_driver) {
-	p += 2;
-	len -= 2;
-	proto = (p[0] << 8) + p[1];
-	if (ifunit >= 0 && !(proto >= 0xc000 || proto == PPP_CCPFRAG))
-	    fd = ppp_dev_fd;
-    }
-    if (write(fd, p, len) < 0) {
-	if (errno == EWOULDBLOCK || errno == ENOBUFS
-	    || errno == ENXIO || errno == EIO || errno == EINTR)
-	    warn("write: warning: %m (%d)", errno);
-	else
-	    error("write: %m (%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-
-void wait_input(struct timeval *timo)
-{
-    fd_set ready, exc;
-    int n;
-
-    ready = in_fds;
-    exc = in_fds;
-    n = select(max_in_fd + 1, &ready, NULL, &exc, timo);
-    if (n < 0 && errno != EINTR)
-	fatal("select: %m(%d)", errno);
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(int fd)
-{
-    FD_SET(fd, &in_fds);
-    if (fd > max_in_fd)
-	max_in_fd = fd;
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(int fd)
-{
-    FD_CLR(fd, &in_fds);
-}
-
-
-/********************************************************************
- *
- * read_packet - get a PPP packet from the serial device.
- */
-
-int read_packet (unsigned char *buf)
-{
-    int len, nr;
-
-    len = PPP_MRU + PPP_HDRLEN;
-    if (new_style_driver) {
-	*buf++ = PPP_ALLSTATIONS;
-	*buf++ = PPP_UI;
-	len -= 2;
-    }
-    nr = -1;
-    if (ppp_fd >= 0) {
-	nr = read(ppp_fd, buf, len);
-	if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
-	    error("read: %m");
-	if (nr < 0 && errno == ENXIO)
-	    return 0;
-    }
-    if (nr < 0 && new_style_driver && ifunit >= 0) {
-	/* N.B. we read ppp_fd first since LCP packets come in there. */
-	nr = read(ppp_dev_fd, buf, len);
-	if (nr < 0 && errno != EWOULDBLOCK && errno != EIO && errno != EINTR)
-	    error("read /dev/ppp: %m");
-	if (nr < 0 && errno == ENXIO)
-	    return 0;
-    }
-    return (new_style_driver && nr > 0)? nr+2: nr;
-}
-
-/********************************************************************
- *
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output(void)
-{
-    int rv = 0;
-    int n;
-
-    if (new_style_driver) {
-	while ((n = read_packet(inpacket_buf)) > 0)
-	    if (loop_frame(inpacket_buf, n))
-		rv = 1;
-	return rv;
-    }
-
-    while ((n = read(master_fd, inbuf, sizeof(inbuf))) > 0)
-	if (loop_chars(inbuf, n))
-	    rv = 1;
-
-    if (n == 0)
-	fatal("eof on loopback");
-
-    if (errno != EWOULDBLOCK)
-	fatal("read from loopback: %m(%d)", errno);
-
-    return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(int unit, int mtu)
-{
-    struct ifreq ifr;
-
-    SYSDEBUG ((LOG_DEBUG, "netif_set_mtu: mtu = %d\n", mtu));
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    ifr.ifr_mtu = mtu;
-	
-    if (ifunit >= 0 && ioctl(sock_fd, SIOCSIFMTU, (caddr_t) &ifr) < 0)
-	fatal("ioctl(SIOCSIFMTU): %m");
-}
-
-/********************************************************************
- *
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-
-void tty_send_config (int mtu,u_int32_t asyncmap,int pcomp,int accomp)
-{
-    u_int x;
-
-/*
- * Set the asyncmap and other parameters for the ppp device
- */
-    if (!still_ppp())
-	return;
-    link_mtu = mtu;
-    SYSDEBUG ((LOG_DEBUG, "send_config: asyncmap = %lx\n", asyncmap));
-    if (ioctl(ppp_fd, PPPIOCSASYNCMAP, (caddr_t) &asyncmap) < 0) {
-	if (!ok_error(errno))
-	    fatal("ioctl(PPPIOCSASYNCMAP): %m(%d)", errno);
-	return;
-    }
-    
-    x = get_flags(ppp_fd);
-    x = pcomp  ? x | SC_COMP_PROT : x & ~SC_COMP_PROT;
-    x = accomp ? x | SC_COMP_AC   : x & ~SC_COMP_AC;
-    x = sync_serial ? x | SC_SYNC : x & ~SC_SYNC;
-    set_flags(ppp_fd, x);
-}
-
-/********************************************************************
- *
- * tty_set_xaccm - set the extended transmit ACCM for the interface.
- */
-
-void tty_set_xaccm (ext_accm accm)
-{
-    SYSDEBUG ((LOG_DEBUG, "set_xaccm: %08lx %08lx %08lx %08lx\n",
-		accm[0], accm[1], accm[2], accm[3]));
-
-    if (!still_ppp())
-	return;
-    if (ioctl(ppp_fd, PPPIOCSXASYNCMAP, accm) < 0 && errno != ENOTTY) {
-	if ( ! ok_error (errno))
-	    warn("ioctl(set extended ACCM): %m(%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * tty_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-
-void tty_recv_config (int mru,u_int32_t asyncmap,int pcomp,int accomp)
-{
-    SYSDEBUG ((LOG_DEBUG, "recv_config: mru = %d\n", mru));
-/*
- * If we were called because the link has gone down then there is nothing
- * which may be done. Just return without incident.
- */
-    if (!still_ppp())
-	return;
-/*
- * Set the receiver parameters
- */
-    if (ioctl(ppp_fd, PPPIOCSMRU, (caddr_t) &mru) < 0) {
-	if ( ! ok_error (errno))
-	    error("ioctl(PPPIOCSMRU): %m(%d)", errno);
-    }
-    if (new_style_driver && ifunit >= 0
-	&& ioctl(ppp_dev_fd, PPPIOCSMRU, (caddr_t) &mru) < 0)
-	error("Couldn't set MRU in generic PPP layer: %m");
-
-    SYSDEBUG ((LOG_DEBUG, "recv_config: asyncmap = %lx\n", asyncmap));
-    if (ioctl(ppp_fd, PPPIOCSRASYNCMAP, (caddr_t) &asyncmap) < 0) {
-	if (!ok_error(errno))
-	    error("ioctl(PPPIOCSRASYNCMAP): %m(%d)", errno);
-    }
-}
-
-/********************************************************************
- *
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-
-int ccp_test (int unit, u_char *opt_ptr, int opt_len, int for_transmit)
-{
-    struct ppp_option_data data;
-
-    memset (&data, '\0', sizeof (data));
-    data.ptr      = opt_ptr;
-    data.length   = opt_len;
-    data.transmit = for_transmit;
-
-    if (ioctl(ppp_dev_fd, PPPIOCSCOMPRESS, (caddr_t) &data) >= 0)
-	return 1;
-
-    return (errno == ENOBUFS)? 0: -1;
-}
-
-/********************************************************************
- *
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-
-void ccp_flags_set (int unit, int isopen, int isup)
-{
-    if (still_ppp()) {
-	int x = get_flags(ppp_dev_fd);
-	x = isopen? x | SC_CCP_OPEN : x &~ SC_CCP_OPEN;
-	x = isup?   x | SC_CCP_UP   : x &~ SC_CCP_UP;
-	set_flags (ppp_dev_fd, x);
-    }
-}
-
-#ifdef PPP_FILTER
-/*
- * set_filters - set the active and pass filters in the kernel driver.
- */
-int set_filters(struct bpf_program *pass, struct bpf_program *active)
-{
-	struct sock_fprog fp;
-
-	fp.len = pass->bf_len;
-	fp.filter = (struct sock_filter *) pass->bf_insns;
-	if (ioctl(ppp_dev_fd, PPPIOCSPASS, &fp) < 0) {
-		if (errno == ENOTTY)
-			warn("kernel does not support PPP filtering");
-		else
-			error("Couldn't set pass-filter in kernel: %m");
-		return 0;
-	}
-	fp.len = active->bf_len;
-	fp.filter = (struct sock_filter *) active->bf_insns;
-	if (ioctl(ppp_dev_fd, PPPIOCSACTIVE, &fp) < 0) {
-		error("Couldn't set active-filter in kernel: %m");
-		return 0;
-	}
-	return 1;
-}
-#endif /* PPP_FILTER */
-
-/********************************************************************
- *
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
-    int u;
-    struct ppp_idle *ip;
-{
-    return ioctl(ppp_dev_fd, PPPIOCGIDLE, ip) >= 0;
-} 
-
-/********************************************************************
- *
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
-    int u;
-    struct pppd_stats *stats;
-{
-    struct ifpppstatsreq req;
-
-    memset (&req, 0, sizeof (req));
-
-    req.stats_ptr = (caddr_t) &req.stats;
-    strlcpy(req.ifr__name, ifname, sizeof(req.ifr__name));
-    if (ioctl(sock_fd, SIOCGPPPSTATS, &req) < 0) {
-	error("Couldn't get PPP statistics: %m");
-	return 0;
-    }
-    stats->bytes_in = req.stats.p.ppp_ibytes;
-    stats->bytes_out = req.stats.p.ppp_obytes;
-    return 1;
-}
-
-/********************************************************************
- *
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise.  This is necessary because of patent nonsense.
- */
-
-int ccp_fatal_error (int unit)
-{
-    int x = get_flags(ppp_dev_fd);
-
-    return x & SC_DC_FERROR;
-}
-
-/********************************************************************
- *
- * path_to_procfs - find the path to the proc file system mount point
- */
-static char proc_path[MAXPATHLEN];
-static int proc_path_len;
-
-static char *path_to_procfs(const char *tail)
-{
-    struct mntent *mntent;
-    FILE *fp;
-
-    if (proc_path_len == 0) {
-	/* Default the mount location of /proc */
-	strlcpy (proc_path, "/proc", sizeof(proc_path));
-	proc_path_len = 5;
-	fp = fopen(MOUNTED, "r");
-	if (fp != NULL) {
-	    while ((mntent = getmntent(fp)) != NULL) {
-		if (strcmp(mntent->mnt_type, MNTTYPE_IGNORE) == 0)
-		    continue;
-		if (strcmp(mntent->mnt_type, "proc") == 0) {
-		    strlcpy(proc_path, mntent->mnt_dir, sizeof(proc_path));
-		    proc_path_len = strlen(proc_path);
-		    break;
-		}
-	    }
-	    fclose (fp);
-	}
-    }
-
-    strlcpy(proc_path + proc_path_len, tail,
-	    sizeof(proc_path) - proc_path_len);
-    return proc_path;
-}
-
-/*
- * /proc/net/route parsing stuff.
- */
-#define ROUTE_MAX_COLS	12
-FILE *route_fd = (FILE *) 0;
-static char route_buffer[512];
-static int route_dev_col, route_dest_col, route_gw_col;
-static int route_flags_col, route_mask_col;
-static int route_num_cols;
-
-static int open_route_table (void);
-static void close_route_table (void);
-static int read_route_table (struct rtentry *rt);
-
-/********************************************************************
- *
- * close_route_table - close the interface to the route table
- */
-
-static void close_route_table (void)
-{
-    if (route_fd != (FILE *) 0) {
-        fclose (route_fd);
-        route_fd = (FILE *) 0;
-    }
-}
-
-/********************************************************************
- *
- * open_route_table - open the interface to the route table
- */
-static char route_delims[] = " \t\n";
-
-static int open_route_table (void)
-{
-    char *path;
-
-    close_route_table();
-
-    path = path_to_procfs("/net/route");
-    route_fd = fopen (path, "r");
-    if (route_fd == NULL) {
-        error("can't open routing table %s: %m", path);
-        return 0;
-    }
-
-    route_dev_col = 0;		/* default to usual columns */
-    route_dest_col = 1;
-    route_gw_col = 2;
-    route_flags_col = 3;
-    route_mask_col = 7;
-    route_num_cols = 8;
-
-    /* parse header line */
-    if (fgets(route_buffer, sizeof(route_buffer), route_fd) != 0) {
-	char *p = route_buffer, *q;
-	int col;
-	for (col = 0; col < ROUTE_MAX_COLS; ++col) {
-	    int used = 1;
-	    if ((q = strtok(p, route_delims)) == 0)
-		break;
-	    if (strcasecmp(q, "iface") == 0)
-		route_dev_col = col;
-	    else if (strcasecmp(q, "destination") == 0)
-		route_dest_col = col;
-	    else if (strcasecmp(q, "gateway") == 0)
-		route_gw_col = col;
-	    else if (strcasecmp(q, "flags") == 0)
-		route_flags_col = col;
-	    else if (strcasecmp(q, "mask") == 0)
-		route_mask_col = col;
-	    else
-		used = 0;
-	    if (used && col >= route_num_cols)
-		route_num_cols = col + 1;
-	    p = NULL;
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * read_route_table - read the next entry from the route table
- */
-
-static int read_route_table(struct rtentry *rt)
-{
-    char *cols[ROUTE_MAX_COLS], *p;
-    int col;
-	
-    memset (rt, '\0', sizeof (struct rtentry));
-
-    if (fgets (route_buffer, sizeof (route_buffer), route_fd) == (char *) 0)
-	return 0;
-
-    p = route_buffer;
-    for (col = 0; col < route_num_cols; ++col) {
-	cols[col] = strtok(p, route_delims);
-	if (cols[col] == NULL)
-	    return 0;		/* didn't get enough columns */
-	p = NULL;
-    }
-
-    SIN_ADDR(rt->rt_dst) = strtoul(cols[route_dest_col], NULL, 16);
-    SIN_ADDR(rt->rt_gateway) = strtoul(cols[route_gw_col], NULL, 16);
-    SIN_ADDR(rt->rt_genmask) = strtoul(cols[route_mask_col], NULL, 16);
-
-    rt->rt_flags = (short) strtoul(cols[route_flags_col], NULL, 16);
-    rt->rt_dev   = cols[route_dev_col];
-
-    return 1;
-}
-
-/********************************************************************
- *
- * defaultroute_exists - determine if there is a default route
- */
-
-static int defaultroute_exists (struct rtentry *rt)
-{
-    int result = 0;
-
-    if (!open_route_table())
-        return 0;
-
-    while (read_route_table(rt) != 0) {
-        if ((rt->rt_flags & RTF_UP) == 0)
-	    continue;
-
-	if (kernel_version > KVERSION(2,1,0) && SIN_ADDR(rt->rt_genmask) != 0)
-	    continue;
-        if (SIN_ADDR(rt->rt_dst) == 0L) {
-	    result = 1;
-	    break;
-	}
-    }
-
-    close_route_table();
-    return result;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address.  `addr' is in network byte order.
- * Return value is 1 if yes, 0 if no, -1 if don't know.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(u_int32_t addr)
-{
-    struct rtentry rt;
-    int result = 0;
-
-    if (!open_route_table())
-	return -1;		/* don't know */
-
-    while (read_route_table(&rt)) {
-	if ((rt.rt_flags & RTF_UP) == 0 || strcmp(rt.rt_dev, ifname) == 0)
-	    continue;
-	if ((addr & SIN_ADDR(rt.rt_genmask)) == SIN_ADDR(rt.rt_dst)) {
-	    result = 1;
-	    break;
-	}
-    }
-
-    close_route_table();
-    return result;
-}
-
-/********************************************************************
- *
- * sifdefaultroute - assign a default route through the address given.
- */
-
-int sifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
-    struct rtentry rt;
-
-    if (defaultroute_exists(&rt) && strcmp(rt.rt_dev, ifname) != 0) {
-	u_int32_t old_gateway = SIN_ADDR(rt.rt_gateway);
-
-	if (old_gateway != gateway)
-	    error("not replacing existing default route to %s [%I]",
-		  rt.rt_dev, old_gateway);
-	return 0;
-    }
-
-    memset (&rt, '\0', sizeof (rt));
-    SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-    SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
-    if (kernel_version > KVERSION(2,1,0)) {
-	SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	SIN_ADDR(rt.rt_genmask) = 0L;
-    }
-
-    SIN_ADDR(rt.rt_gateway) = gateway;
-    
-    rt.rt_flags = RTF_UP | RTF_GATEWAY;
-    if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
-	if ( ! ok_error ( errno ))
-	    error("default route ioctl(SIOCADDRT): %m(%d)", errno);
-	return 0;
-    }
-
-    default_route_gateway = gateway;
-    return 1;
-}
-
-/********************************************************************
- *
- * cifdefaultroute - delete a default route through the address given.
- */
-
-int cifdefaultroute (int unit, u_int32_t ouraddr, u_int32_t gateway)
-{
-    struct rtentry rt;
-
-    default_route_gateway = 0;
-
-    memset (&rt, '\0', sizeof (rt));
-    SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-    SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-
-    if (kernel_version > KVERSION(2,1,0)) {
-	SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	SIN_ADDR(rt.rt_genmask) = 0L;
-    }
-
-    SIN_ADDR(rt.rt_gateway) = gateway;
-    
-    rt.rt_flags = RTF_UP | RTF_GATEWAY;
-    if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
-	if (still_ppp()) {
-	    if ( ! ok_error ( errno ))
-		error("default route ioctl(SIOCDELRT): %m (%d)", errno);
-	    return 0;
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-
-int sifproxyarp (int unit, u_int32_t his_adr)
-{
-    struct arpreq arpreq;
-    char *forw_path;
-
-    if (has_proxy_arp == 0) {
-	memset (&arpreq, '\0', sizeof(arpreq));
-    
-	SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
-	SIN_ADDR(arpreq.arp_pa) = his_adr;
-	arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-/*
- * Get the hardware address of an interface on the same subnet
- * as our local address.
- */
-	if (!get_ether_addr(his_adr, &arpreq.arp_ha, proxy_arp_dev,
-			    sizeof(proxy_arp_dev))) {
-	    error("Cannot determine ethernet address for proxy ARP");
-	    return 0;
-	}
-	strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
-	if (ioctl(sock_fd, SIOCSARP, (caddr_t)&arpreq) < 0) {
-	    if ( ! ok_error ( errno ))
-		error("ioctl(SIOCSARP): %m(%d)", errno);
-	    return 0;
-	}
-	proxy_arp_addr = his_adr;
-	has_proxy_arp = 1;
-
-	if (tune_kernel) {
-	    forw_path = path_to_procfs("/sys/net/ipv4/ip_forward");
-	    if (forw_path != 0) {
-		int fd = open(forw_path, O_WRONLY);
-		if (fd >= 0) {
-		    if (write(fd, "1", 1) != 1)
-			error("Couldn't enable IP forwarding: %m");
-		    close(fd);
-		}
-	    }
-	}
-    }
-
-    return 1;
-}
-
-/********************************************************************
- *
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-
-int cifproxyarp (int unit, u_int32_t his_adr)
-{
-    struct arpreq arpreq;
-
-    if (has_proxy_arp) {
-	has_proxy_arp = 0;
-	memset (&arpreq, '\0', sizeof(arpreq));
-	SET_SA_FAMILY(arpreq.arp_pa, AF_INET);
-	SIN_ADDR(arpreq.arp_pa) = his_adr;
-	arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-	strlcpy(arpreq.arp_dev, proxy_arp_dev, sizeof(arpreq.arp_dev));
-
-	if (ioctl(sock_fd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-	    if ( ! ok_error ( errno ))
-		warn("ioctl(SIOCDARP): %m(%d)", errno);
-	    return 0;
-	}
-    }
-    return 1;
-}
-     
-/********************************************************************
- *
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-
-static int get_ether_addr (u_int32_t ipaddr,
-			   struct sockaddr *hwaddr,
-			   char *name, int namelen)
-{
-    struct ifreq *ifr, *ifend;
-    u_int32_t ina, mask;
-    char *aliasp;
-    struct ifreq ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-    
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
-	if ( ! ok_error ( errno ))
-	    error("ioctl(SIOCGIFCONF): %m(%d)", errno);
-	return 0;
-    }
-
-    SYSDEBUG ((LOG_DEBUG, "proxy arp: scanning %d interfaces for IP %s",
-		ifc.ifc_len / sizeof(struct ifreq), ip_ntoa(ipaddr)));
-/*
- * Scan through looking for an interface with an Internet
- * address on the same subnet as `ipaddr'.
- */
-    ifend = ifs + (ifc.ifc_len / sizeof(struct ifreq));
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-	if (ifr->ifr_addr.sa_family == AF_INET) {
-	    ina = SIN_ADDR(ifr->ifr_addr);
-	    strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-            SYSDEBUG ((LOG_DEBUG, "proxy arp: examining interface %s",
-			ifreq.ifr_name));
-/*
- * Check that the interface is up, and not point-to-point
- * nor loopback.
- */
-	    if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
-		continue;
-
-	    if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
-		continue;
-/*
- * Get its netmask and check that it's on the right subnet.
- */
-	    if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
-	        continue;
-
-	    mask = SIN_ADDR(ifreq.ifr_addr);
-	    SYSDEBUG ((LOG_DEBUG, "proxy arp: interface addr %s mask %lx",
-			ip_ntoa(ina), ntohl(mask)));
-
-	    if (((ipaddr ^ ina) & mask) != 0)
-	        continue;
-	    break;
-	}
-    }
-    
-    if (ifr >= ifend)
-        return 0;
-
-    strlcpy(name, ifreq.ifr_name, namelen);
-
-    /* trim off the :1 in eth0:1 */
-    aliasp = strchr(name, ':');
-    if (aliasp != 0)
-	*aliasp = 0;
-
-    info("found interface %s for proxy arp", name);
-/*
- * Now get the hardware address.
- */
-    memset (&ifreq.ifr_hwaddr, 0, sizeof (struct sockaddr));
-    if (ioctl (sock_fd, SIOCGIFHWADDR, &ifreq) < 0) {
-        error("SIOCGIFHWADDR(%s): %m(%d)", ifreq.ifr_name, errno);
-        return 0;
-    }
-
-    memcpy (hwaddr,
-	    &ifreq.ifr_hwaddr,
-	    sizeof (struct sockaddr));
-
-    SYSDEBUG ((LOG_DEBUG,
-	   "proxy arp: found hwaddr %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
-		(int) ((unsigned char *) &hwaddr->sa_data)[0],
-		(int) ((unsigned char *) &hwaddr->sa_data)[1],
-		(int) ((unsigned char *) &hwaddr->sa_data)[2],
-		(int) ((unsigned char *) &hwaddr->sa_data)[3],
-		(int) ((unsigned char *) &hwaddr->sa_data)[4],
-		(int) ((unsigned char *) &hwaddr->sa_data)[5],
-		(int) ((unsigned char *) &hwaddr->sa_data)[6],
-		(int) ((unsigned char *) &hwaddr->sa_data)[7]));
-    return 1;
-}
-
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *name)
-{
-	struct ifreq ifreq;
-	int ret, sock_fd;
-
-	sock_fd = socket(AF_INET, SOCK_DGRAM, 0);
-	if (sock_fd < 0)
-		return 0;
-	memset(&ifreq.ifr_hwaddr, 0, sizeof(struct sockaddr));
-	strlcpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name));
-	ret = ioctl(sock_fd, SIOCGIFHWADDR, &ifreq);
-	close(sock_fd);
-	if (ret >= 0)
-		memcpy(addr, ifreq.ifr_hwaddr.sa_data, 6);
-	return ret;
-}
-
-/*
- * get_first_ethernet - return the name of the first ethernet-style
- * interface on this system.
- */
-char *
-get_first_ethernet()
-{
-	return "eth0";
-}
-
-/********************************************************************
- *
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'.  If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-
-u_int32_t GetMask (u_int32_t addr)
-{
-    u_int32_t mask, nmask, ina;
-    struct ifreq *ifr, *ifend, ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-
-    addr = ntohl(addr);
-    
-    if (IN_CLASSA(addr))	/* determine network mask for address class */
-	nmask = IN_CLASSA_NET;
-    else if (IN_CLASSB(addr))
-	    nmask = IN_CLASSB_NET;
-    else
-	    nmask = IN_CLASSC_NET;
-    
-    /* class D nets are disallowed by bad_ip_adrs */
-    mask = netmask | htonl(nmask);
-/*
- * Scan through the system's network interfaces.
- */
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sock_fd, SIOCGIFCONF, &ifc) < 0) {
-	if ( ! ok_error ( errno ))
-	    warn("ioctl(SIOCGIFCONF): %m(%d)", errno);
-	return mask;
-    }
-    
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr++) {
-/*
- * Check the interface's internet address.
- */
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	ina = SIN_ADDR(ifr->ifr_addr);
-	if (((ntohl(ina) ^ addr) & nmask) != 0)
-	    continue;
-/*
- * Check that the interface is up, and not point-to-point nor loopback.
- */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(sock_fd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	
-	if (((ifreq.ifr_flags ^ FLAGS_GOOD) & FLAGS_MASK) != 0)
-	    continue;
-/*
- * Get its netmask and OR it into our mask.
- */
-	if (ioctl(sock_fd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	mask |= SIN_ADDR(ifreq.ifr_addr);
-	break;
-    }
-    return mask;
-}
-
-/********************************************************************
- *
- * Internal routine to decode the version.modification.patch level
- */
-
-static void decode_version (char *buf, int *version,
-			    int *modification, int *patch)
-{
-    char *endp;
-
-    *version      = (int) strtoul (buf, &endp, 10);
-    *modification = 0;
-    *patch        = 0;
-    
-    if (endp != buf && *endp == '.') {
-	buf = endp + 1;
-	*modification = (int) strtoul (buf, &endp, 10);
-	if (endp != buf && *endp == '.') {
-	    buf = endp + 1;
-	    *patch = (int) strtoul (buf, &buf, 10);
-	}
-    }
-}
-
-/********************************************************************
- *
- * Procedure to determine if the PPP line discipline is registered.
- */
-
-static int
-ppp_registered(void)
-{
-    int local_fd;
-    int mfd = -1;
-    int ret = 0;
-    char slave[16];
-
-    /*
-     * We used to open the serial device and set it to the ppp line
-     * discipline here, in order to create a ppp unit.  But that is
-     * not a good idea - the user might have specified a device that
-     * they can't open (permission, or maybe it doesn't really exist).
-     * So we grab a pty master/slave pair and use that.
-     */
-    if (!get_pty(&mfd, &local_fd, slave, 0)) {
-	no_ppp_msg = "Couldn't determine if PPP is supported (no free ptys)";
-	return 0;
-    }
-
-    /*
-     * Try to put the device into the PPP discipline.
-     */
-    if (ioctl(local_fd, TIOCSETD, &ppp_disc) < 0) {
-	error("ioctl(TIOCSETD(PPP)): %m(%d)", errno);
-    } else
-	ret = 1;
-    
-    close(local_fd);
-    close(mfd);
-    return ret;
-}
-
-/********************************************************************
- *
- * ppp_available - check whether the system has any ppp interfaces
- * (in fact we check whether we can do an ioctl on ppp0).
- */
-
-int ppp_available(void)
-{
-    int s, ok, fd;
-    struct ifreq ifr;
-    int    size;
-    int    my_version, my_modification, my_patch;
-    int osmaj, osmin, ospatch;
-
-    no_ppp_msg = 
-	"This system lacks kernel support for PPP.  This could be because\n"
-	"the PPP kernel module could not be loaded, or because PPP was not\n"
-	"included in the kernel configuration.  If PPP was included as a\n"
-	"module, try `/sbin/modprobe -v ppp'.  If that fails, check that\n"
-	"ppp.o exists in /lib/modules/`uname -r`/net.\n"
-	"See README.linux file in the ppp distribution for more details.\n";
-
-    /* get the kernel version now, since we are called before sys_init */
-    uname(&utsname);
-    osmaj = osmin = ospatch = 0;
-    sscanf(utsname.release, "%d.%d.%d", &osmaj, &osmin, &ospatch);
-    kernel_version = KVERSION(osmaj, osmin, ospatch);
-
-    fd = open("/dev/ppp", O_RDWR);
-#if 0
-    if (fd < 0 && errno == ENOENT) {
-	/* try making it and see if that helps. */
-	if (mknod("/dev/ppp", S_IFCHR | S_IRUSR | S_IWUSR,
-		  makedev(108, 0)) >= 0) {
-	    fd = open("/dev/ppp", O_RDWR);
-	    if (fd >= 0)
-		info("Created /dev/ppp device node");
-	    else
-		unlink("/dev/ppp");	/* didn't work, undo the mknod */
-	} else if (errno == EEXIST) {
-	    fd = open("/dev/ppp", O_RDWR);
-	}
-    }
-#endif /* 0 */
-    if (fd >= 0) {
-	new_style_driver = 1;
-
-	/* XXX should get from driver */
-	driver_version = 2;
-	driver_modification = 4;
-	driver_patch = 0;
-	close(fd);
-	return 1;
-    }
-    if (kernel_version >= KVERSION(2,3,13)) {
-	if (errno == ENOENT)
-	    no_ppp_msg =
-		"pppd is unable to open the /dev/ppp device.\n"
-		"You need to create the /dev/ppp device node by\n"
-		"executing the following command as root:\n"
-		"	mknod /dev/ppp c 108 0\n";
-	return 0;
-    }
-
-/*
- * Open a socket for doing the ioctl operations.
- */    
-    s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s < 0)
-	return 0;
-    
-    strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
-    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-/*
- * If the device did not exist then attempt to create one by putting the
- * current tty into the PPP discipline. If this works then obtain the
- * flags for the device again.
- */
-    if (!ok) {
-	if (ppp_registered()) {
-	    strlcpy (ifr.ifr_name, "ppp0", sizeof (ifr.ifr_name));
-	    ok = ioctl(s, SIOCGIFFLAGS, (caddr_t) &ifr) >= 0;
-	}
-    }
-/*
- * Ensure that the hardware address is for PPP and not something else
- */
-    if (ok)
-        ok = ioctl (s, SIOCGIFHWADDR, (caddr_t) &ifr) >= 0;
-
-    if (ok && ((ifr.ifr_hwaddr.sa_family & ~0xFF) != ARPHRD_PPP))
-        ok = 0;
-
-/*
- *  This is the PPP device. Validate the version of the driver at this
- *  point to ensure that this program will work with the driver.
- */
-    if (ok) {
-	char   abBuffer [1024];
-
-	ifr.ifr_data = abBuffer;
-	size = ioctl (s, SIOCGPPPVER, (caddr_t) &ifr);
-	if (size < 0) {
-	    error("Couldn't read driver version: %m");
-	    ok = 0;
-	    no_ppp_msg = "Sorry, couldn't verify kernel driver version\n";
-
-	} else {
-	    decode_version(abBuffer,
-			   &driver_version,
-			   &driver_modification,
-			   &driver_patch);
-/*
- * Validate the version of the driver against the version that we used.
- */
-	    decode_version(VERSION,
-			   &my_version,
-			   &my_modification,
-			   &my_patch);
-
-	    /* The version numbers must match */
-	    if (driver_version != my_version)
-		ok = 0;
-      
-	    /* The modification levels must be legal */
-	    if (driver_modification < 3) {
-		if (driver_modification >= 2) {
-		    /* we can cope with 2.2.0 and above */
-		    driver_is_old = 1;
-		} else {
-		    ok = 0;
-		}
-	    }
-
-	    close (s);
-	    if (!ok) {
-		slprintf(route_buffer, sizeof(route_buffer),
-			 "Sorry - PPP driver version %d.%d.%d is out of date\n",
-			 driver_version, driver_modification, driver_patch);
-
-		no_ppp_msg = route_buffer;
-	    }
-	}
-    }
-    return ok;
-}
-
-/********************************************************************
- *
- * Update the wtmp file with the appropriate user name and tty device.
- */
-
-void logwtmp (const char *line, const char *name, const char *host)
-{
-    struct utmp ut, *utp;
-    pid_t  mypid = getpid();
-#if __GLIBC__ < 2
-    int    wtmp;
-#endif
-
-/*
- * Update the signon database for users.
- * Christoph Lameter: Copied from poeigl-1.36 Jan 3, 1996
- */
-    utmpname(_PATH_UTMP);
-    setutent();
-    while ((utp = getutent()) && (utp->ut_pid != mypid))
-        /* nothing */;
-
-    /* Is this call really necessary? There is another one after the 'put' */
-    endutent();
-    
-    if (utp)
-	memcpy(&ut, utp, sizeof(ut));
-    else
-	/* some gettys/telnetds don't initialize utmp... */
-	memset(&ut, 0, sizeof(ut));
-
-    if (ut.ut_id[0] == 0)
-	strncpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
-	
-    strncpy(ut.ut_user, name, sizeof(ut.ut_user));
-    strncpy(ut.ut_line, line, sizeof(ut.ut_line));
-
-    time(&ut.ut_time);
-
-    ut.ut_type = USER_PROCESS;
-    ut.ut_pid  = mypid;
-
-    /* Insert the host name if one is supplied */
-    if (*host)
-	strncpy (ut.ut_host, host, sizeof(ut.ut_host));
-
-    /* Insert the IP address of the remote system if IP is enabled */
-    if (ipcp_protent.enabled_flag && ipcp_hisoptions[0].neg_addr)
-	memcpy(&ut.ut_addr, (char *) &ipcp_hisoptions[0].hisaddr,
-		 sizeof(ut.ut_addr));
-	
-    /* CL: Makes sure that the logout works */
-    if (*host == 0 && *name==0)
-	ut.ut_host[0]=0;
-
-    pututline(&ut);
-    endutent();
-/*
- * Update the wtmp file.
- */
-#if __GLIBC__ >= 2
-    updwtmp(_PATH_WTMP, &ut);
-#else
-    wtmp = open(_PATH_WTMP, O_APPEND|O_WRONLY);
-    if (wtmp >= 0) {
-	flock(wtmp, LOCK_EX);
-
-	if (write (wtmp, (char *)&ut, sizeof(ut)) != sizeof(ut))
-	    warn("error writing %s: %m", _PATH_WTMP);
-
-	flock(wtmp, LOCK_UN);
-
-	close (wtmp);
-    }
-#endif
-}
-
-
-/********************************************************************
- *
- * sifvjcomp - config tcp header compression
- */
-
-int sifvjcomp (int u, int vjcomp, int cidcomp, int maxcid)
-{
-    u_int x = get_flags(ppp_dev_fd);
-
-    if (vjcomp) {
-        if (ioctl (ppp_dev_fd, PPPIOCSMAXCID, (caddr_t) &maxcid) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(PPPIOCSMAXCID): %m(%d)", errno);
-	    vjcomp = 0;
-	}
-    }
-
-    x = vjcomp  ? x | SC_COMP_TCP     : x &~ SC_COMP_TCP;
-    x = cidcomp ? x & ~SC_NO_TCP_CCID : x | SC_NO_TCP_CCID;
-    set_flags (ppp_dev_fd, x);
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifup - Config the interface up and enable IP packets to pass.
- */
-
-int sifup(int u)
-{
-    struct ifreq ifr;
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-
-    ifr.ifr_flags |= (IFF_UP | IFF_POINTOPOINT);
-    if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-    if_is_up++;
-
-    return 1;
-}
-
-/********************************************************************
- *
- * sifdown - Disable the indicated protocol and config the interface
- *	     down if there are no remaining protocols.
- */
-
-int sifdown (int u)
-{
-    struct ifreq ifr;
-
-    if (if_is_up && --if_is_up > 0)
-	return 1;
-
-    memset (&ifr, '\0', sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-    if (ioctl(sock_fd, SIOCGIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl (SIOCGIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-
-    ifr.ifr_flags &= ~IFF_UP;
-    ifr.ifr_flags |= IFF_POINTOPOINT;
-    if (ioctl(sock_fd, SIOCSIFFLAGS, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFFLAGS): %m(%d)", errno);
-	return 0;
-    }
-    return 1;
-}
-
-/********************************************************************
- *
- * sifaddr - Config the interface IP addresses and netmask.
- */
-
-int sifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr,
-	     u_int32_t net_mask)
-{
-    struct ifreq   ifr; 
-    struct rtentry rt;
-    
-    memset (&ifr, '\0', sizeof (ifr));
-    memset (&rt,  '\0', sizeof (rt));
-    
-    SET_SA_FAMILY (ifr.ifr_addr,    AF_INET); 
-    SET_SA_FAMILY (ifr.ifr_dstaddr, AF_INET); 
-    SET_SA_FAMILY (ifr.ifr_netmask, AF_INET); 
-
-    strlcpy (ifr.ifr_name, ifname, sizeof (ifr.ifr_name));
-/*
- *  Set our IP address
- */
-    SIN_ADDR(ifr.ifr_addr) = our_adr;
-    if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	if (errno != EEXIST) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCSIFADDR): %m(%d)", errno);
-	}
-        else {
-	    warn("ioctl(SIOCSIFADDR): Address already exists");
-	}
-        return (0);
-    }
-/*
- *  Set the gateway address
- */
-    SIN_ADDR(ifr.ifr_dstaddr) = his_adr;
-    if (ioctl(sock_fd, SIOCSIFDSTADDR, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(SIOCSIFDSTADDR): %m(%d)", errno); 
-	return (0);
-    } 
-/*
- *  Set the netmask.
- *  For recent kernels, force the netmask to 255.255.255.255.
- */
-    if (kernel_version >= KVERSION(2,1,16))
-	net_mask = ~0L;
-    if (net_mask != 0) {
-	SIN_ADDR(ifr.ifr_netmask) = net_mask;
-	if (ioctl(sock_fd, SIOCSIFNETMASK, (caddr_t) &ifr) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCSIFNETMASK): %m(%d)", errno); 
-	    return (0);
-	} 
-    }
-/*
- *  Add the device route
- */
-    if (kernel_version < KVERSION(2,1,16)) {
-	SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-	SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-	rt.rt_dev = ifname;
-
-	SIN_ADDR(rt.rt_gateway) = 0L;
-	SIN_ADDR(rt.rt_dst)     = his_adr;
-	rt.rt_flags = RTF_UP | RTF_HOST;
-
-	if (kernel_version > KVERSION(2,1,0)) {
-	    SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	    SIN_ADDR(rt.rt_genmask) = -1L;
-	}
-
-	if (ioctl(sock_fd, SIOCADDRT, &rt) < 0) {
-	    if (! ok_error (errno))
-		error("ioctl(SIOCADDRT) device route: %m(%d)", errno);
-	    return (0);
-	}
-    }
-
-    /* set ip_dynaddr in demand mode if address changes */
-    if (demand && tune_kernel && !dynaddr_set
-	&& our_old_addr && our_old_addr != our_adr) {
-	/* set ip_dynaddr if possible */
-	char *path;
-	int fd;
-
-	path = path_to_procfs("/sys/net/ipv4/ip_dynaddr");
-	if (path != 0 && (fd = open(path, O_WRONLY)) >= 0) {
-	    if (write(fd, "1", 1) != 1)
-		error("Couldn't enable dynamic IP addressing: %m");
-	    close(fd);
-	}
-	dynaddr_set = 1;	/* only 1 attempt */
-    }
-    our_old_addr = 0;
-
-    return 1;
-}
-
-/********************************************************************
- *
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-
-int cifaddr (int unit, u_int32_t our_adr, u_int32_t his_adr)
-{
-    struct ifreq ifr;
-
-    if (kernel_version < KVERSION(2,1,16)) {
-/*
- *  Delete the route through the device
- */
-	struct rtentry rt;
-	memset (&rt, '\0', sizeof (rt));
-
-	SET_SA_FAMILY (rt.rt_dst,     AF_INET);
-	SET_SA_FAMILY (rt.rt_gateway, AF_INET);
-	rt.rt_dev = ifname;
-
-	SIN_ADDR(rt.rt_gateway) = 0;
-	SIN_ADDR(rt.rt_dst)     = his_adr;
-	rt.rt_flags = RTF_UP | RTF_HOST;
-
-	if (kernel_version > KVERSION(2,1,0)) {
-	    SET_SA_FAMILY (rt.rt_genmask, AF_INET);
-	    SIN_ADDR(rt.rt_genmask) = -1L;
-	}
-
-	if (ioctl(sock_fd, SIOCDELRT, &rt) < 0 && errno != ESRCH) {
-	    if (still_ppp() && ! ok_error (errno))
-		error("ioctl(SIOCDELRT) device route: %m(%d)", errno);
-	    return (0);
-	}
-    }
-
-    /* This way it is possible to have an IPX-only or IPv6-only interface */
-    memset(&ifr, 0, sizeof(ifr));
-    SET_SA_FAMILY(ifr.ifr_addr, AF_INET);
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    
-    if (ioctl(sock_fd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	if (! ok_error (errno)) {
-	    error("ioctl(SIOCSIFADDR): %m(%d)", errno);
-	    return 0;
-	}
-    }
-
-    our_old_addr = our_adr;
-
-    return 1;
-}
-
-#ifdef INET6
-/********************************************************************
- * 
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int sif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
-    struct in6_ifreq ifr6;
-    struct ifreq ifr;
-    struct in6_rtmsg rt6;
-
-    if (sock6_fd < 0) {
-	errno = -sock6_fd;
-	error("IPv6 socket creation failed: %m");
-	return 0;
-    }
-    memset(&ifr, 0, sizeof (ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
-	error("sif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
-	return 0;
-    }
-    
-    /* Local interface */
-    memset(&ifr6, 0, sizeof(ifr6));
-    IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
-    ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-    ifr6.ifr6_prefixlen = 10;
-
-    if (ioctl(sock6_fd, SIOCSIFADDR, &ifr6) < 0) {
-	error("sif6addr: ioctl(SIOCSIFADDR): %m (%d)", errno);
-	return 0;
-    }
-    
-    /* Route to remote host */
-    memset(&rt6, 0, sizeof(rt6));
-    IN6_LLADDR_FROM_EUI64(rt6.rtmsg_dst, his_eui64);
-    rt6.rtmsg_flags = RTF_UP;
-    rt6.rtmsg_dst_len = 10;
-    rt6.rtmsg_ifindex = ifr.ifr_ifindex;
-    rt6.rtmsg_metric = 1;
-    
-    if (ioctl(sock6_fd, SIOCADDRT, &rt6) < 0) {
-	error("sif6addr: ioctl(SIOCADDRT): %m (%d)", errno);
-	return 0;
-    }
-
-    return 1;
-}
-
-
-/********************************************************************
- *
- * cif6addr - Remove IPv6 address from interface
- */
-int cif6addr (int unit, eui64_t our_eui64, eui64_t his_eui64)
-{
-    struct ifreq ifr;
-    struct in6_ifreq ifr6;
-
-    if (sock6_fd < 0) {
-	errno = -sock6_fd;
-	error("IPv6 socket creation failed: %m");
-	return 0;
-    }
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock6_fd, SIOCGIFINDEX, (caddr_t) &ifr) < 0) {
-	error("cif6addr: ioctl(SIOCGIFINDEX): %m (%d)", errno);
-	return 0;
-    }
-    
-    memset(&ifr6, 0, sizeof(ifr6));
-    IN6_LLADDR_FROM_EUI64(ifr6.ifr6_addr, our_eui64);
-    ifr6.ifr6_ifindex = ifr.ifr_ifindex;
-    ifr6.ifr6_prefixlen = 10;
-
-    if (ioctl(sock6_fd, SIOCDIFADDR, &ifr6) < 0) {
-	if (errno != EADDRNOTAVAIL) {
-	    if (! ok_error (errno))
-		error("cif6addr: ioctl(SIOCDIFADDR): %m (%d)", errno);
-	}
-        else {
-	    warn("cif6addr: ioctl(SIOCDIFADDR): No such address");
-	}
-        return (0);
-    }
-    return 1;
-}
-#endif /* INET6 */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given.  Assumes slave_name points to >= 16 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
-    int *master_fdp;
-    int *slave_fdp;
-    char *slave_name;
-    int uid;
-{
-    int i, mfd, sfd = -1;
-    char pty_name[16];
-    struct termios tios;
-
-#ifdef TIOCGPTN
-    /*
-     * Try the unix98 way first.
-     */
-    mfd = open("/dev/ptmx", O_RDWR);
-    if (mfd >= 0) {
-	int ptn;
-	if (ioctl(mfd, TIOCGPTN, &ptn) >= 0) {
-	    slprintf(pty_name, sizeof(pty_name), "/dev/pts/%d", ptn);
-	    chmod(pty_name, S_IRUSR | S_IWUSR);
-#ifdef TIOCSPTLCK
-	    ptn = 0;
-	    if (ioctl(mfd, TIOCSPTLCK, &ptn) < 0)
-		warn("Couldn't unlock pty slave %s: %m", pty_name);
-#endif
-	    if ((sfd = open(pty_name, O_RDWR | O_NOCTTY)) < 0)
-		warn("Couldn't open pty slave %s: %m", pty_name);
-	}
-    }
-#endif /* TIOCGPTN */
-
-    if (sfd < 0) {
-	/* the old way - scan through the pty name space */
-	for (i = 0; i < 64; ++i) {
-	    slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
-		     'p' + i / 16, i % 16);
-	    mfd = open(pty_name, O_RDWR, 0);
-	    if (mfd >= 0) {
-		pty_name[5] = 't';
-		sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
-		if (sfd >= 0) {
-		    fchown(sfd, uid, -1);
-		    fchmod(sfd, S_IRUSR | S_IWUSR);
-		    break;
-		}
-		close(mfd);
-	    }
-	}
-    }
-
-    if (sfd < 0)
-	return 0;
-
-    strlcpy(slave_name, pty_name, 16);
-    *master_fdp = mfd;
-    *slave_fdp = sfd;
-    if (tcgetattr(sfd, &tios) == 0) {
-	tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
-	tios.c_cflag |= CS8 | CREAD | CLOCAL;
-	tios.c_iflag  = IGNPAR;
-	tios.c_oflag  = 0;
-	tios.c_lflag  = 0;
-	if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
-	    warn("couldn't set attributes on pty: %m");
-    } else
-	warn("couldn't get attributes on pty: %m");
-
-    return 1;
-}
-
-/********************************************************************
- *
- * open_loopback - open the device we use for getting packets
- * in demand mode.  Under Linux, we use a pty master/slave pair.
- */
-int
-open_ppp_loopback(void)
-{
-    int flags;
-
-    looped = 1;
-    if (new_style_driver) {
-	/* allocate ourselves a ppp unit */
-	if (make_ppp_unit() < 0)
-	    die(1);
-	set_flags(ppp_dev_fd, SC_LOOP_TRAFFIC);
-	set_kdebugflag(kdebugflag);
-	ppp_fd = -1;
-	return ppp_dev_fd;
-    }
-
-    if (!get_pty(&master_fd, &slave_fd, loop_name, 0))
-	fatal("No free pty for loopback");
-    SYSDEBUG(("using %s for loopback", loop_name));
-
-    set_ppp_fd(slave_fd);
-
-    flags = fcntl(master_fd, F_GETFL);
-    if (flags == -1 ||
-	fcntl(master_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set master loopback to nonblock: %m(%d)", errno);
-
-    flags = fcntl(ppp_fd, F_GETFL);
-    if (flags == -1 ||
-	fcntl(ppp_fd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set slave loopback to nonblock: %m(%d)", errno);
-
-    if (ioctl(ppp_fd, TIOCSETD, &ppp_disc) < 0)
-	fatal("ioctl(TIOCSETD): %m(%d)", errno);
-/*
- * Find out which interface we were given.
- */
-    if (ioctl(ppp_fd, PPPIOCGUNIT, &ifunit) < 0)
-	fatal("ioctl(PPPIOCGUNIT): %m(%d)", errno);
-/*
- * Enable debug in the driver if requested.
- */
-    set_kdebugflag (kdebugflag);
-
-    return master_fd;
-}
-
-/********************************************************************
- *
- * restore_loop - reattach the ppp unit to the loopback.
- *
- * The kernel ppp driver automatically reattaches the ppp unit to
- * the loopback if the serial port is set to a line discipline other
- * than ppp, or if it detects a modem hangup.  The former will happen
- * in disestablish_ppp if the latter hasn't already happened, so we
- * shouldn't need to do anything.
- *
- * Just to be sure, set the real serial port to the normal discipline.
- */
-
-static void
-restore_loop(void)
-{
-    looped = 1;
-    if (new_style_driver) {
-	set_flags(ppp_dev_fd, get_flags(ppp_dev_fd) | SC_LOOP_TRAFFIC);
-	return;
-    }
-    if (ppp_fd != slave_fd) {
-	(void) ioctl(ppp_fd, TIOCSETD, &tty_disc);
-	set_ppp_fd(slave_fd);
-    }
-}
-
-/********************************************************************
- *
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-
-int
-sifnpmode(u, proto, mode)
-    int u;
-    int proto;
-    enum NPmode mode;
-{
-    struct npioctl npi;
-
-    npi.protocol = proto;
-    npi.mode     = mode;
-    if (ioctl(ppp_dev_fd, PPPIOCSNPMODE, (caddr_t) &npi) < 0) {
-	if (! ok_error (errno))
-	    error("ioctl(PPPIOCSNPMODE, %d, %d): %m (%d)",
-		   proto, mode, errno);
-	return 0;
-    }
-    return 1;
-}
-
-
-/********************************************************************
- *
- * sipxfaddr - Config the interface IPX networknumber
- */
-
-int sipxfaddr (int unit, unsigned long int network, unsigned char * node )
-{
-    int    result = 1;
-
-#ifdef IPX_CHANGE
-    int    skfd; 
-    struct ifreq         ifr;
-    struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
-    skfd = socket (AF_IPX, SOCK_DGRAM, 0);
-    if (skfd < 0) { 
-	if (! ok_error (errno))
-	    dbglog("socket(AF_IPX): %m (%d)", errno);
-	result = 0;
-    }
-    else {
-	memset (&ifr, '\0', sizeof (ifr));
-	strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
-	memcpy (sipx->sipx_node, node, IPX_NODE_LEN);
-	sipx->sipx_family  = AF_IPX;
-	sipx->sipx_port    = 0;
-	sipx->sipx_network = htonl (network);
-	sipx->sipx_type    = IPX_FRAME_ETHERII;
-	sipx->sipx_action  = IPX_CRTITF;
-/*
- *  Set the IPX device
- */
-	if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	    result = 0;
-	    if (errno != EEXIST) {
-		if (! ok_error (errno))
-		    dbglog("ioctl(SIOCSIFADDR, CRTITF): %m (%d)", errno);
-	    }
-	    else {
-		warn("ioctl(SIOCSIFADDR, CRTITF): Address already exists");
-	    }
-	}
-	close (skfd);
-    }
-#endif
-    return result;
-}
-
-/********************************************************************
- *
- * cipxfaddr - Clear the information for the IPX network. The IPX routes
- *	       are removed and the device is no longer able to pass IPX
- *	       frames.
- */
-
-int cipxfaddr (int unit)
-{
-    int    result = 1;
-
-#ifdef IPX_CHANGE
-    int    skfd; 
-    struct ifreq         ifr;
-    struct sockaddr_ipx *sipx = (struct sockaddr_ipx *) &ifr.ifr_addr;
-
-    skfd = socket (AF_IPX, SOCK_DGRAM, 0);
-    if (skfd < 0) { 
-	if (! ok_error (errno))
-	    dbglog("socket(AF_IPX): %m (%d)", errno);
-	result = 0;
-    }
-    else {
-	memset (&ifr, '\0', sizeof (ifr));
-	strlcpy (ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-
-	sipx->sipx_type    = IPX_FRAME_ETHERII;
-	sipx->sipx_action  = IPX_DLTITF;
-	sipx->sipx_family  = AF_IPX;
-/*
- *  Set the IPX device
- */
-	if (ioctl(skfd, SIOCSIFADDR, (caddr_t) &ifr) < 0) {
-	    if (! ok_error (errno))
-		info("ioctl(SIOCSIFADDR, IPX_DLTITF): %m (%d)", errno);
-	    result = 0;
-	}
-	close (skfd);
-    }
-#endif
-    return result;
-}
-
-/*
- * Use the hostname as part of the random number seed.
- */
-int
-get_host_seed()
-{
-    int h;
-    char *p = hostname;
-
-    h = 407;
-    for (p = hostname; *p != 0; ++p)
-	h = h * 37 + *p;
-    return h;
-}
-
-/********************************************************************
- *
- * sys_check_options - check the options that the user specified
- */
-
-int
-sys_check_options(void)
-{
-#ifdef IPX_CHANGE
-/*
- * Disable the IPX protocol if the support is not present in the kernel.
- */
-    char *path;
-
-    if (ipxcp_protent.enabled_flag) {
-	struct stat stat_buf;
-        if ((path = path_to_procfs("/net/ipx_interface")) == 0
-	    || lstat(path, &stat_buf) < 0) {
-	    error("IPX support is not present in the kernel\n");
-	    ipxcp_protent.enabled_flag = 0;
-	}
-    }
-#endif
-    if (demand && driver_is_old) {
-	option_error("demand dialling is not supported by kernel driver "
-		     "version %d.%d.%d", driver_version, driver_modification,
-		     driver_patch);
-	return 0;
-    }
-    if (multilink && !new_style_driver) {
-	warn("Warning: multilink is not supported by the kernel driver");
-	multilink = 0;
-    }
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-solaris.c b/mdk-stage1/ppp/pppd/sys-solaris.c
deleted file mode 100644
index da5f9c45a..000000000
--- a/mdk-stage1/ppp/pppd/sys-solaris.c
+++ /dev/null
@@ -1,2737 +0,0 @@
-/*
- * System-dependent procedures for pppd under Solaris 2.
- *
- * Parts re-written by Adi Masputra <adi.masputra@sun.com>, based on 
- * the original sys-svr4.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT.  SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID	"$Id$"
-
-#include <limits.h>
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <termios.h>
-#ifndef CRTSCTS
-#include <sys/termiox.h>
-#endif
-#include <signal.h>
-#include <utmpx.h>
-#include <sys/types.h>
-#include <sys/ioccom.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <sys/sysmacros.h>
-#include <sys/systeminfo.h>
-#include <sys/dlpi.h>
-#include <sys/stat.h>
-#include <sys/mkdev.h>
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/route.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-#ifdef SOL2
-#include <sys/tihdr.h>
-#include <sys/tiuser.h>
-#include <inet/common.h>
-#include <inet/mib2.h>
-#include <sys/ethernet.h>
-#endif
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-#include "ipcp.h"
-#include "ccp.h"
-
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME	"ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-#if !defined(PPP_DEV_NAME)
-#define PPP_DEV_NAME	"/dev/" PPP_DRV_NAME
-#endif /* !defined(PPP_DEV_NAME) */
-
-#if !defined(AHDLC_MOD_NAME)
-#define AHDLC_MOD_NAME	"ppp_ahdl"
-#endif /* !defined(AHDLC_MOD_NAME) */
-
-#if !defined(COMP_MOD_NAME)
-#define COMP_MOD_NAME	"ppp_comp"
-#endif /* !defined(COMP_MOD_NAME) */
-
-#if !defined(IP_DEV_NAME)
-#define	IP_DEV_NAME	"/dev/ip"
-#endif /* !defined(IP_DEV_NAME) */
-
-#if !defined(IP_MOD_NAME)
-#define	IP_MOD_NAME	"ip"
-#endif /* !defined(IP_MOD_NAME) */
-
-#if !defined(UDP_DEV_NAME) && defined(SOL2)
-#define	UDP_DEV_NAME	"/dev/udp"
-#endif /* !defined(UDP_DEV_NAME) && defined(SOL2) */
-
-#if !defined(UDP6_DEV_NAME) && defined(SOL2)
-#define	UDP6_DEV_NAME	"/dev/udp6"
-#endif /* !defined(UDP6_DEV_NAME) && defined(SOL2) */
-
-static const char rcsid[] = RCSID;
-
-#if defined(SOL2)
-/*
- * "/dev/udp" is used as a multiplexor to PLINK the interface stream
- * under. It is used in place of "/dev/ip" since STREAMS will not let
- * a driver be PLINK'ed under itself, and "/dev/ip" is typically the
- * driver at the bottom of the tunneling interfaces stream.
- */
-static char *mux_dev_name = UDP_DEV_NAME;
-#else
-static char *mux_dev_name = IP_DEV_NAME;
-#endif
-static int	pppfd;
-static int	fdmuxid = -1;
-static int	ipfd;
-static int	ipmuxid = -1;
-
-#if defined(INET6) && defined(SOL2)
-static int	ip6fd;		/* IP file descriptor */
-static int	ip6muxid = -1;	/* Multiplexer file descriptor */
-static int	if6_is_up = 0;	/* IPv6 interface has been marked up */
-
-#define _IN6_LLX_FROM_EUI64(l, s, eui64, as) do {	\
-	s->sin6_addr.s6_addr32[0] = htonl(as); 	\
-	eui64_copy(eui64, s->sin6_addr.s6_addr32[2]);	\
-	s->sin6_family = AF_INET6;		\
-	l.lifr_addr.ss_family = AF_INET6;	\
-	l.lifr_addrlen = 10;			\
-	l.lifr_addr = laddr;			\
-	} while (0)
-
-#define IN6_LLADDR_FROM_EUI64(l, s, eui64)  \
-    _IN6_LLX_FROM_EUI64(l, s, eui64, 0xfe800000)
-
-#define IN6_LLTOKEN_FROM_EUI64(l, s, eui64) \
-    _IN6_LLX_FROM_EUI64(l, s, eui64, 0)
-
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if defined(INET6) && defined(SOL2)
-static char	first_ether_name[LIFNAMSIZ];	/* Solaris 8 and above */
-#else
-static char	first_ether_name[IFNAMSIZ];	/* Before Solaris 8 */
-#define MAXIFS		256			/* Max # of interfaces */
-#endif /* defined(INET6) && defined(SOL2) */
-
-static int	restore_term;
-static struct termios inittermios;
-#ifndef CRTSCTS
-static struct termiox inittermiox;
-static int	termiox_ok;
-#endif
-static struct winsize wsinfo;	/* Initial window size info */
-static pid_t	tty_sid;	/* original session ID for terminal */
-
-extern u_char	inpacket_buf[];	/* borrowed from main.c */
-
-#define MAX_POLLFDS	32
-static struct pollfd pollfds[MAX_POLLFDS];
-static int n_pollfds;
-
-static int	link_mtu, link_mru;
-
-#define NMODULES	32
-static int	tty_nmodules;
-static char	tty_modules[NMODULES][FMNAMESZ+1];
-static int	tty_npushed;
-
-static int	if_is_up;	/* Interface has been marked up */
-static u_int32_t remote_addr;		/* IP address of peer */
-static u_int32_t default_route_gateway;	/* Gateway for default route added */
-static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
-
-/* Prototypes for procedures local to this file. */
-static int translate_speed __P((int));
-static int baud_rate_of __P((int));
-static int get_ether_addr __P((u_int32_t, struct sockaddr *));
-static int get_hw_addr __P((char *, u_int32_t, struct sockaddr *));
-static int get_hw_addr_dlpi __P((char *, struct sockaddr *));
-static int dlpi_attach __P((int, int));
-static int dlpi_info_req __P((int));
-static int dlpi_get_reply __P((int, union DL_primitives *, int, int));
-static int strioctl __P((int, int, void *, int, int));
-
-#ifdef SOL2
-/*
- * sifppa - Sets interface ppa
- *
- * without setting the ppa, ip module will return EINVAL upon setting the
- * interface UP (SIOCSxIFFLAGS). This is because ip module in 2.8 expects
- * two DLPI_INFO_REQ to be sent down to the driver (below ip) before
- * IFF_UP can be set. Plumbing the device causes one DLPI_INFO_REQ to
- * be sent down, and the second DLPI_INFO_REQ is sent upon receiving
- * IF_UNITSEL (old) or SIOCSLIFNAME (new) ioctls. Such setting of the ppa
- * is required because the ppp DLPI provider advertises itself as
- * a DLPI style 2 type, which requires a point of attachment to be
- * specified. The only way the user can specify a point of attachment
- * is via SIOCSLIFNAME or IF_UNITSEL.
- *
- * Such changes in the behavior of ip module was made to meet new or
- * evolving standards requirements.
- *
- */
-static int
-sifppa(fd, ppa)
-    int fd;
-    int ppa;
-{
-    return (int)ioctl(fd, IF_UNITSEL, (char *)&ppa);
-}
-#endif /* SOL2 */
-
-#if defined(SOL2) && defined(INET6)
-/*
- * get_first_ethernet - returns the first Ethernet interface name found in 
- * the system, or NULL if none is found
- *
- * NOTE: This is the lifreq version (Solaris 8 and above)
- */
-char *
-get_first_ethernet()
-{
-    struct lifnum lifn;
-    struct lifconf lifc;
-    struct lifreq *plifreq;
-    struct lifreq lifr;
-    int	fd, num_ifs, i, found;
-    uint_t fl, req_size;
-    char *req;
-
-    fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (fd < 0) {
-	return 0;
-    }
-
-    /*
-     * Find out how many interfaces are running
-     */
-    lifn.lifn_family = AF_UNSPEC;
-    lifn.lifn_flags = LIFC_NOXMIT;
-    if (ioctl(fd, SIOCGLIFNUM, &lifn) < 0) {
-	close(fd);
-	error("could not determine number of interfaces: %m");
-	return 0;
-    }
-
-    num_ifs = lifn.lifn_count;
-    req_size = num_ifs * sizeof(struct lifreq);
-    req = malloc(req_size);
-    if (req == NULL) {
-	close(fd);
-	error("out of memory");
-	return 0;
-    }
-
-    /*
-     * Get interface configuration info for all interfaces
-     */
-    lifc.lifc_family = AF_UNSPEC;
-    lifc.lifc_flags = LIFC_NOXMIT;
-    lifc.lifc_len = req_size;
-    lifc.lifc_buf = req;
-    if (ioctl(fd, SIOCGLIFCONF, &lifc) < 0) {
-	close(fd);
-	free(req);
-	error("SIOCGLIFCONF: %m");
-	return 0;
-    }
-
-    /*
-     * And traverse each interface to look specifically for the first
-     * occurence of an Ethernet interface which has been marked up
-     */
-    plifreq = lifc.lifc_req;
-    found = 0;
-    for (i = lifc.lifc_len / sizeof(struct lifreq); i > 0; i--, plifreq++) {
-
-	if (strchr(plifreq->lifr_name, ':') != NULL)
-	    continue;
-
-	memset(&lifr, 0, sizeof(lifr));
-	strncpy(lifr.lifr_name, plifreq->lifr_name, sizeof(lifr.lifr_name));
-	if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	    close(fd);
-	    free(req);
-	    error("SIOCGLIFFLAGS: %m");
-	    return 0;
-	}
-	fl = lifr.lifr_flags;
-
-	if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
-		!= (IFF_UP | IFF_BROADCAST))
-	    continue;
-
-	found = 1;
-	break;
-    }
-    free(req);
-    close(fd);
-
-    if (found) {
-	strncpy(first_ether_name, lifr.lifr_name, sizeof(first_ether_name));
-	return (char *)first_ether_name;
-    } else
-	return NULL;
-}
-#else
-/*
- * get_first_ethernet - returns the first Ethernet interface name found in 
- * the system, or NULL if none is found
- *
- * NOTE: This is the ifreq version (before Solaris 8). 
- */
-char *
-get_first_ethernet()
-{
-    struct ifconf ifc;
-    struct ifreq *pifreq;
-    struct ifreq ifr;
-    int	fd, num_ifs, i, found;
-    uint_t fl, req_size;
-    char *req;
-
-    fd = socket(AF_INET, SOCK_DGRAM, 0);
-    if (fd < 0) {
-	return 0;
-    }
-
-    /*
-     * Find out how many interfaces are running
-     */
-    if (ioctl(fd, SIOCGIFNUM, (char *)&num_ifs) < 0) {
-	num_ifs = MAXIFS;
-    }
-
-    req_size = num_ifs * sizeof(struct ifreq);
-    req = malloc(req_size);
-    if (req == NULL) {
-	close(fd);
-	error("out of memory");
-	return 0;
-    }
-
-    /*
-     * Get interface configuration info for all interfaces
-     */
-    ifc.ifc_len = req_size;
-    ifc.ifc_buf = req;
-    if (ioctl(fd, SIOCGIFCONF, &ifc) < 0) {
-	close(fd);
-	free(req);
-	error("SIOCGIFCONF: %m");
-	return 0;
-    }
-
-    /*
-     * And traverse each interface to look specifically for the first
-     * occurence of an Ethernet interface which has been marked up
-     */
-    pifreq = ifc.ifc_req;
-    found = 0;
-    for (i = ifc.ifc_len / sizeof(struct ifreq); i > 0; i--, pifreq++) {
-
-	if (strchr(pifreq->ifr_name, ':') != NULL)
-	    continue;
-
-	memset(&ifr, 0, sizeof(ifr));
-	strncpy(ifr.ifr_name, pifreq->ifr_name, sizeof(ifr.ifr_name));
-	if (ioctl(fd, SIOCGIFFLAGS, &ifr) < 0) {
-	    close(fd);
-	    free(req);
-	    error("SIOCGIFFLAGS: %m");
-	    return 0;
-	}
-	fl = ifr.ifr_flags;
-
-	if ((fl & (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
-		!= (IFF_UP | IFF_BROADCAST))
-	    continue;
-
-	found = 1;
-	break;
-    }
-    free(req);
-    close(fd);
-
-    if (found) {
-	strncpy(first_ether_name, ifr.ifr_name, sizeof(first_ether_name));
-	return (char *)first_ether_name;
-    } else
-	return NULL;
-}
-#endif /* defined(SOL2) && defined(INET6) */
-
-#if defined(SOL2)
-/*
- * get_if_hwaddr - get the hardware address for the specified
- * network interface device.
- */
-int
-get_if_hwaddr(u_char *addr, char *if_name)
-{
-    struct sockaddr s_eth_addr;
-    struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data;
-
-    if (if_name == NULL)
-	return -1;
-
-    /*
-     * Send DL_INFO_REQ to the driver to solicit its MAC address
-     */
-    if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) {
-	error("could not obtain hardware address for %s", if_name);
-	return -1;
-    }
-
-    memcpy(addr, eth_addr->ether_addr_octet, 6);
-    return 1;
-}
-#endif /* SOL2 */
-
-#if defined(SOL2) && defined(INET6)
-/*
- * slifname - Sets interface ppa and flags
- *
- * in addition to the comments stated in sifppa(), IFF_IPV6 bit must
- * be set in order to declare this as an IPv6 interface
- */
-static int
-slifname(fd, ppa)
-    int fd;
-    int ppa;
-{
-    struct  lifreq lifr;
-    int	    ret;
-
-    memset(&lifr, 0, sizeof(lifr));
-    ret = ioctl(fd, SIOCGLIFFLAGS, &lifr);
-    if (ret < 0)
-	goto slifname_done;
-
-    lifr.lifr_flags |= IFF_IPV6;
-    lifr.lifr_flags &= ~(IFF_BROADCAST | IFF_IPV4);
-    lifr.lifr_ppa = ppa;
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-
-    ret = ioctl(fd, SIOCSLIFNAME, &lifr);
-
-slifname_done:
-    return ret;
-
-
-}
-
-
-/*
- * ether_to_eui64 - Convert 48-bit Ethernet address into 64-bit EUI
- *
- * walks the list of valid ethernet interfaces, and convert the first
- * found 48-bit MAC address into EUI 64. caller also assumes that
- * the system has a properly configured Ethernet interface for this
- * function to return non-zero.
- */
-int
-ether_to_eui64(eui64_t *p_eui64)
-{
-    struct sockaddr s_eth_addr;
-    struct ether_addr *eth_addr = (struct ether_addr *)&s_eth_addr.sa_data;
-    char *if_name;
-
-    if ((if_name = get_first_ethernet()) == NULL) {
-	error("no persistent id can be found");
-	return 0;
-    }
- 
-    /*
-     * Send DL_INFO_REQ to the driver to solicit its MAC address
-     */
-    if (!get_hw_addr_dlpi(if_name, &s_eth_addr)) {
-	error("could not obtain hardware address for %s", if_name);
-	return 0;
-    }
-
-    /*
-     * And convert the EUI-48 into EUI-64, per RFC 2472 [sec 4.1]
-     */
-    p_eui64->e8[0] = (eth_addr->ether_addr_octet[0] & 0xFF) | 0x02;
-    p_eui64->e8[1] = (eth_addr->ether_addr_octet[1] & 0xFF);
-    p_eui64->e8[2] = (eth_addr->ether_addr_octet[2] & 0xFF);
-    p_eui64->e8[3] = 0xFF;
-    p_eui64->e8[4] = 0xFE;
-    p_eui64->e8[5] = (eth_addr->ether_addr_octet[3] & 0xFF);
-    p_eui64->e8[6] = (eth_addr->ether_addr_octet[4] & 0xFF);
-    p_eui64->e8[7] = (eth_addr->ether_addr_octet[5] & 0xFF);
-
-    return 1;
-}
-#endif /* defined(SOL2) && defined(INET6) */
-
-/*
- * sys_init - System-dependent initialization.
- */
-void
-sys_init()
-{
-    int ifd, x;
-    struct ifreq ifr;
-#if defined(INET6) && defined(SOL2)
-    int i6fd;
-    struct lifreq lifr;
-#endif /* defined(INET6) && defined(SOL2) */
-#if !defined(SOL2)
-    struct {
-	union DL_primitives prim;
-	char space[64];
-    } reply;
-#endif /* !defined(SOL2) */
-
-    ipfd = open(mux_dev_name, O_RDWR, 0);
-    if (ipfd < 0)
-	fatal("Couldn't open IP device: %m");
-
-#if defined(INET6) && defined(SOL2)
-    ip6fd = open(UDP6_DEV_NAME, O_RDWR, 0);
-    if (ip6fd < 0)
-	fatal("Couldn't open IP device (2): %m");
-#endif /* defined(INET6) && defined(SOL2) */
-
-    if (default_device && !notty)
-	tty_sid = getsid((pid_t)0);
-
-    pppfd = open(PPP_DEV_NAME, O_RDWR | O_NONBLOCK, 0);
-    if (pppfd < 0)
-	fatal("Can't open %s: %m", PPP_DEV_NAME);
-    if (kdebugflag & 1) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-
-    /* Assign a new PPA and get its unit number. */
-    if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0)
-	fatal("Can't create new PPP interface: %m");
-
-#if defined(SOL2)
-    /*
-     * Since sys_init() is called prior to ifname being set in main(),
-     * we need to get the ifname now, otherwise slifname(), and others,
-     * will fail, or maybe, I should move them to a later point ?
-     * <adi.masputra@sun.com>
-     */
-    sprintf(ifname, PPP_DRV_NAME "%d", ifunit);
-#endif /* defined(SOL2) */
-    /*
-     * Open the ppp device again and link it under the ip multiplexor.
-     * IP will assign a unit number which hopefully is the same as ifunit.
-     * I don't know any way to be certain they will be the same. :-(
-     */
-    ifd = open(PPP_DEV_NAME, O_RDWR, 0);
-    if (ifd < 0)
-	fatal("Can't open %s (2): %m", PPP_DEV_NAME);
-    if (kdebugflag & 1) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(ifd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-
-#if defined(INET6) && defined(SOL2)
-    i6fd = open(PPP_DEV_NAME, O_RDWR, 0);
-    if (i6fd < 0) {
-	close(ifd);
-	fatal("Can't open %s (3): %m", PPP_DEV_NAME);
-    }
-    if (kdebugflag & 1) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(i6fd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if defined(SOL2)
-    if (ioctl(ifd, I_PUSH, IP_MOD_NAME) < 0) {
-	close(ifd);
-#if defined(INET6)
-	close(i6fd);
-#endif /* defined(INET6) */
-	fatal("Can't push IP module: %m");
-    }
-
-    /*
-     * Assign ppa according to the unit number returned by ppp device
-     * after plumbing is completed above.
-     */
-    if (sifppa(ifd, ifunit) < 0) {
-        close (ifd);
-#if defined(INET6)
-	close(i6fd);
-#endif /* defined(INET6) */
-        fatal("Can't set ppa for unit %d: %m", ifunit);
-    }
-
-#if defined(INET6)
-    /*
-     * An IPv6 interface is created anyway, even when the user does not 
-     * explicitly enable it. Note that the interface will be marked
-     * IPv6 during slifname().
-     */
-    if (ioctl(i6fd, I_PUSH, IP_MOD_NAME) < 0) {
-	close(ifd);
-	close(i6fd);
-	fatal("Can't push IP module (2): %m");
-    }
-
-    /*
-     * Assign ppa according to the unit number returned by ppp device
-     * after plumbing is completed above. In addition, mark the interface
-     * as an IPv6 interface.
-     */
-    if (slifname(i6fd, ifunit) < 0) {
-	close(ifd);
-	close(i6fd);
-	fatal("Can't set ifname for unit %d: %m", ifunit);
-    }
-#endif /* defined(INET6) */
-
-    ipmuxid = ioctl(ipfd, I_PLINK, ifd);
-    close(ifd);
-    if (ipmuxid < 0) {
-#if defined(INET6)
-	close(i6fd);
-#endif /* defined(INET6) */
-	fatal("Can't I_PLINK PPP device to IP: %m");
-    }
-
-    memset(&ifr, 0, sizeof(ifr));
-    sprintf(ifr.ifr_name, "%s", ifname);
-    ifr.ifr_ip_muxid = ipmuxid;
-
-    /*
-     * In Sol 8 and later, STREAMS dynamic module plumbing feature exists.
-     * This is so that an arbitrary module can be inserted, or deleted, 
-     * between ip module and the device driver without tearing down the 
-     * existing stream. Such feature requires the mux ids, which is set 
-     * by SIOCSIFMUXID (or SIOCLSIFMUXID).
-     */
-    if (ioctl(ipfd, SIOCSIFMUXID, &ifr) < 0) {
-	ioctl(ipfd, I_PUNLINK, ipmuxid);
-#if defined(INET6)
-	close(i6fd);
-#endif /* defined(INET6) */
-	fatal("SIOCSIFMUXID: %m");
-    }
-
-#else /* else if !defined(SOL2) */
-
-    if (dlpi_attach(ifd, ifunit) < 0 ||
-	dlpi_get_reply(ifd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0) {
-	close(ifd);
-	fatal("Can't attach to ppp%d: %m", ifunit);
-    }
-
-    ipmuxid = ioctl(ipfd, I_LINK, ifd);
-    close(ifd);
-    if (ipmuxid < 0)
-	fatal("Can't link PPP device to IP: %m");
-#endif /* defined(SOL2) */
-
-#if defined(INET6) && defined(SOL2)
-    ip6muxid = ioctl(ip6fd, I_PLINK, i6fd);
-    close(i6fd);
-    if (ip6muxid < 0) {
-	ioctl(ipfd, I_PUNLINK, ipmuxid);
-	fatal("Can't I_PLINK PPP device to IP (2): %m");
-    }
-
-    memset(&lifr, 0, sizeof(lifr));
-    sprintf(lifr.lifr_name, "%s", ifname);
-    lifr.lifr_ip_muxid = ip6muxid;
-
-    /*
-     * Let IP know of the mux id [see comment for SIOCSIFMUXID above]
-     */
-    if (ioctl(ip6fd, SIOCSLIFMUXID, &lifr) < 0) {
-	ioctl(ipfd, I_PUNLINK, ipmuxid);
-	ioctl(ip6fd, I_PUNLINK, ip6muxid);
-	fatal("Can't link PPP device to IP (2): %m");
-    }
-#endif /* defined(INET6) && defined(SOL2) */
-
-#if !defined(SOL2)
-    /* Set the interface name for the link. */
-    slprintf(ifr.ifr_name, sizeof(ifr.ifr_name), PPP_DRV_NAME "%d", ifunit);
-    ifr.ifr_metric = ipmuxid;
-    if (strioctl(ipfd, SIOCSIFNAME, (char *)&ifr, sizeof ifr, 0) < 0)
-	fatal("Can't set interface name %s: %m", ifr.ifr_name);
-#endif /* !defined(SOL2) */
-
-    n_pollfds = 0;
-}
-
-/*
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This should call die() because it's called from die().
- */
-void
-sys_cleanup()
-{
-#if defined(SOL2)
-    struct ifreq ifr;
-#if defined(INET6)
-    struct lifreq lifr;
-#endif /* defined(INET6) */
-#endif /* defined(SOL2) */
-
-#if defined(SOL2) && defined(INET6)
-    if (if6_is_up)
-	sif6down(0);
-#endif /* defined(SOL2) && defined(INET6) */
-    if (if_is_up)
-	sifdown(0);
-    if (default_route_gateway)
-	cifdefaultroute(0, default_route_gateway, default_route_gateway);
-    if (proxy_arp_addr)
-	cifproxyarp(0, proxy_arp_addr);
-#if defined(SOL2)
-    /*
-     * Make sure we ask ip what the muxid, because 'ifconfig modlist' will
-     * unlink and re-link the modules, causing the muxid to change.
-     */
-    memset(&ifr, 0, sizeof(ifr));
-    sprintf(ifr.ifr_name, "%s", ifname);
-    if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("SIOCGIFFLAGS: %m");
-	return;
-    }
-
-    if (ioctl(ipfd, SIOCGIFMUXID, &ifr) < 0) {
-	error("SIOCGIFMUXID: %m");
-	return;
-    }
-
-    ipmuxid = ifr.ifr_ip_muxid;
-     
-    if (ioctl(ipfd, I_PUNLINK, ipmuxid) < 0) {
-	error("Can't I_PUNLINK PPP from IP: %m");
-	return;
-    }
-#if defined(INET6)
-    /*
-     * Make sure we ask ip what the muxid, because 'ifconfig modlist' will
-     * unlink and re-link the modules, causing the muxid to change.
-     */
-    memset(&lifr, 0, sizeof(lifr));
-    sprintf(lifr.lifr_name, "%s", ifname);
-    if (ioctl(ip6fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	error("SIOCGLIFFLAGS: %m");
-	return;
-    }
-
-    if (ioctl(ip6fd, SIOCGLIFMUXID, &lifr) < 0) {
-	error("SIOCGLIFMUXID: %m");
-	return;
-    }
-
-    ip6muxid = lifr.lifr_ip_muxid;
-
-    if (ioctl(ip6fd, I_PUNLINK, ip6muxid) < 0) {
-	error("Can't I_PUNLINK PPP from IP (2): %m");
-    }
-#endif /* defined(INET6) */
-#endif /* defined(SOL2) */
-}
-
-/*
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close()
-{
-    close(ipfd);
-#if defined(INET6) && defined(SOL2)
-    close(ip6fd);
-#endif /* defined(INET6) && defined(SOL2) */
-    if (pppfd >= 0)
-	close(pppfd);
-}
-
-/*
- * sys_check_options - check the options that the user specified
- */
-int
-sys_check_options()
-{
-    return 1;
-}
-
-#if 0
-/*
- * daemon - Detach us from controlling terminal session.
- */
-int
-daemon(nochdir, noclose)
-    int nochdir, noclose;
-{
-    int pid;
-
-    if ((pid = fork()) < 0)
-	return -1;
-    if (pid != 0)
-	exit(0);		/* parent dies */
-    setsid();
-    if (!nochdir)
-	chdir("/");
-    if (!noclose) {
-	fclose(stdin);		/* don't need stdin, stdout, stderr */
-	fclose(stdout);
-	fclose(stderr);
-    }
-    return 0;
-}
-#endif
-
-/*
- * ppp_available - check whether the system has any ppp interfaces
- */
-int
-ppp_available()
-{
-    struct stat buf;
-
-    return stat(PPP_DEV_NAME, &buf) >= 0;
-}
-
-/*
- * any_compressions - see if compression is enabled or not
- *
- * In the STREAMS implementation of kernel-portion pppd,
- * the comp STREAMS module performs the ACFC, PFC, as well
- * CCP and VJ compressions. However, if the user has explicitly
- * declare to not enable them from the command line, there is
- * no point of having the comp module be pushed on the stream.
- */
-static int
-any_compressions()
-{
-    if ((!lcp_wantoptions[0].neg_accompression) &&
-	(!lcp_wantoptions[0].neg_pcompression) &&
-	(!ccp_protent.enabled_flag) &&
-	(!ipcp_wantoptions[0].neg_vj)) {
-	    return 0;
-    }
-    return 1;
-}
-
-/*
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-int
-tty_establish_ppp(fd)
-    int fd;
-{
-    int i;
-
-    /* Pop any existing modules off the tty stream. */
-    for (i = 0;; ++i)
-	if (ioctl(fd, I_LOOK, tty_modules[i]) < 0
-	    || strcmp(tty_modules[i], "ptem") == 0
-	    || ioctl(fd, I_POP, 0) < 0)
-	    break;
-    tty_nmodules = i;
-
-    /* Push the async hdlc module and the compressor module. */
-    tty_npushed = 0;
-
-    if(!sync_serial) {
-        if (ioctl(fd, I_PUSH, AHDLC_MOD_NAME) < 0) {
-            error("Couldn't push PPP Async HDLC module: %m");
-	    return -1;
-        }
-        ++tty_npushed;
-    }
-    if (kdebugflag & 4) {
-	i = PPPDBG_LOG + PPPDBG_AHDLC;
-	strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0);
-    }
-    /*
-     * There's no need to push comp module if we don't intend
-     * to compress anything
-     */
-    if (any_compressions()) { 
-        if (ioctl(fd, I_PUSH, COMP_MOD_NAME) < 0)
-	    error("Couldn't push PPP compression module: %m");
-	else
-	    ++tty_npushed;
-    }
-
-    if (kdebugflag & 2) {
-	i = PPPDBG_LOG; 
-	if (any_compressions())
-	    i += PPPDBG_COMP;
-	strioctl(pppfd, PPPIO_DEBUG, &i, sizeof(int), 0);
-    }
-
-    /* Link the serial port under the PPP multiplexor. */
-    if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0) {
-	error("Can't link tty to PPP mux: %m");
-	return -1;
-    }
-
-    return pppfd;
-}
-
-/*
- * tty_disestablish_ppp - Restore the serial port to normal operation.
- * It attempts to reconstruct the stream with the previously popped
- * modules.  This shouldn't call die() because it's called from die().
- */
-void
-tty_disestablish_ppp(fd)
-    int fd;
-{
-    int i;
-
-    if (fdmuxid >= 0) {
-	if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) {
-	    if (!hungup)
-		error("Can't unlink tty from PPP mux: %m");
-	}
-	fdmuxid = -1;
-
-	if (!hungup) {
-	    while (tty_npushed > 0 && ioctl(fd, I_POP, 0) >= 0)
-		--tty_npushed;
-	    for (i = tty_nmodules - 1; i >= 0; --i)
-		if (ioctl(fd, I_PUSH, tty_modules[i]) < 0)
-		    error("Couldn't restore tty module %s: %m",
-			   tty_modules[i]);
-	}
-	if (hungup && default_device && tty_sid > 0) {
-	    /*
-	     * If we have received a hangup, we need to send a SIGHUP
-	     * to the terminal's controlling process.  The reason is
-	     * that the original stream head for the terminal hasn't
-	     * seen the M_HANGUP message (it went up through the ppp
-	     * driver to the stream head for our fd to /dev/ppp).
-	     */
-	    kill(tty_sid, SIGHUP);
-	}
-    }
-}
-
-/*
- * Check whether the link seems not to be 8-bit clean.
- */
-void
-clean_check()
-{
-    int x;
-    char *s;
-
-    if (strioctl(pppfd, PPPIO_GCLEAN, &x, 0, sizeof(x)) < 0)
-	return;
-    s = NULL;
-    switch (~x) {
-    case RCV_B7_0:
-	s = "bit 7 set to 1";
-	break;
-    case RCV_B7_1:
-	s = "bit 7 set to 0";
-	break;
-    case RCV_EVNP:
-	s = "odd parity";
-	break;
-    case RCV_ODDP:
-	s = "even parity";
-	break;
-    }
-    if (s != NULL) {
-	warn("Serial link is not 8-bit clean:");
-	warn("All received characters had %s", s);
-    }
-}
-
-/*
- * List of valid speeds.
- */
-struct speed {
-    int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
-    { 50, B50 },
-#endif
-#ifdef B75
-    { 75, B75 },
-#endif
-#ifdef B110
-    { 110, B110 },
-#endif
-#ifdef B134
-    { 134, B134 },
-#endif
-#ifdef B150
-    { 150, B150 },
-#endif
-#ifdef B200
-    { 200, B200 },
-#endif
-#ifdef B300
-    { 300, B300 },
-#endif
-#ifdef B600
-    { 600, B600 },
-#endif
-#ifdef B1200
-    { 1200, B1200 },
-#endif
-#ifdef B1800
-    { 1800, B1800 },
-#endif
-#ifdef B2000
-    { 2000, B2000 },
-#endif
-#ifdef B2400
-    { 2400, B2400 },
-#endif
-#ifdef B3600
-    { 3600, B3600 },
-#endif
-#ifdef B4800
-    { 4800, B4800 },
-#endif
-#ifdef B7200
-    { 7200, B7200 },
-#endif
-#ifdef B9600
-    { 9600, B9600 },
-#endif
-#ifdef B19200
-    { 19200, B19200 },
-#endif
-#ifdef B38400
-    { 38400, B38400 },
-#endif
-#ifdef EXTA
-    { 19200, EXTA },
-#endif
-#ifdef EXTB
-    { 38400, EXTB },
-#endif
-#ifdef B57600
-    { 57600, B57600 },
-#endif
-#ifdef B76800
-    { 76800, B76800 },
-#endif
-#ifdef B115200
-    { 115200, B115200 },
-#endif
-#ifdef B153600
-    { 153600, B153600 },
-#endif
-#ifdef B230400
-    { 230400, B230400 },
-#endif
-#ifdef B307200
-    { 307200, B307200 },
-#endif
-#ifdef B460800
-    { 460800, B460800 },
-#endif
-    { 0, 0 }
-};
-
-/*
- * Translate from bits/second to a speed_t.
- */
-static int
-translate_speed(bps)
-    int bps;
-{
-    struct speed *speedp;
-
-    if (bps == 0)
-	return 0;
-    for (speedp = speeds; speedp->speed_int; speedp++)
-	if (bps == speedp->speed_int)
-	    return speedp->speed_val;
-    warn("speed %d not supported", bps);
-    return 0;
-}
-
-/*
- * Translate from a speed_t to bits/second.
- */
-static int
-baud_rate_of(speed)
-    int speed;
-{
-    struct speed *speedp;
-
-    if (speed == 0)
-	return 0;
-    for (speedp = speeds; speedp->speed_int; speedp++)
-	if (speed == speedp->speed_val)
-	    return speedp->speed_int;
-    return 0;
-}
-
-/*
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.  If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-void
-set_up_tty(fd, local)
-    int fd, local;
-{
-    int speed;
-    struct termios tios;
-#if !defined (CRTSCTS)
-    struct termiox tiox;
-#endif
-
-    if (!sync_serial && tcgetattr(fd, &tios) < 0)
-	fatal("tcgetattr: %m");
-
-#ifndef CRTSCTS
-    termiox_ok = 1;
-    if (!sync_serial && ioctl (fd, TCGETX, &tiox) < 0) {
-	termiox_ok = 0;
-	if (errno != ENOTTY)
-	    error("TCGETX: %m");
-    }
-#endif
-
-    if (!restore_term) {
-	inittermios = tios;
-#ifndef CRTSCTS
-	inittermiox = tiox;
-#endif
-	if (!sync_serial)
-	    ioctl(fd, TIOCGWINSZ, &wsinfo);
-    }
-
-    tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-#ifdef CRTSCTS
-    if (crtscts > 0)
-	tios.c_cflag |= CRTSCTS;
-    else if (crtscts < 0)
-	tios.c_cflag &= ~CRTSCTS;
-#else
-    if (crtscts != 0 && !termiox_ok) {
-	error("Can't set RTS/CTS flow control");
-    } else if (crtscts > 0) {
-	tiox.x_hflag |= RTSXOFF|CTSXON;
-    } else if (crtscts < 0) {
-	tiox.x_hflag &= ~(RTSXOFF|CTSXON);
-    }
-#endif
-
-    tios.c_cflag |= CS8 | CREAD | HUPCL;
-    if (local || !modem)
-	tios.c_cflag |= CLOCAL;
-    tios.c_iflag = IGNBRK | IGNPAR;
-    tios.c_oflag = 0;
-    tios.c_lflag = 0;
-    tios.c_cc[VMIN] = 1;
-    tios.c_cc[VTIME] = 0;
-
-    if (crtscts == -2) {
-	tios.c_iflag |= IXON | IXOFF;
-	tios.c_cc[VSTOP] = 0x13;	/* DC3 = XOFF = ^S */
-	tios.c_cc[VSTART] = 0x11;	/* DC1 = XON  = ^Q */
-    }
-
-    speed = translate_speed(inspeed);
-    if (speed) {
-	cfsetospeed(&tios, speed);
-	cfsetispeed(&tios, speed);
-    } else {
-	speed = cfgetospeed(&tios);
-	/*
-	 * We can't proceed if the serial port speed is 0,
-	 * since that implies that the serial port is disabled.
-	 */
-	if ((speed == B0) && !sync_serial)
-	    fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
-    }
-
-    if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &tios) < 0)
-	fatal("tcsetattr: %m");
-
-#ifndef CRTSCTS
-    if (!sync_serial && termiox_ok && ioctl (fd, TCSETXF, &tiox) < 0){
-	error("TCSETXF: %m");
-    }
-#endif
-
-    baud_rate = inspeed = baud_rate_of(speed);
-    if (!sync_serial)
-	restore_term = 1;
-}
-
-/*
- * restore_tty - restore the terminal to the saved settings.
- */
-void
-restore_tty(fd)
-    int fd;
-{
-    if (restore_term) {
-	if (!default_device) {
-	    /*
-	     * Turn off echoing, because otherwise we can get into
-	     * a loop with the tty and the modem echoing to each other.
-	     * We presume we are the sole user of this tty device, so
-	     * when we close it, it will revert to its defaults anyway.
-	     */
-	    inittermios.c_lflag &= ~(ECHO | ECHONL);
-	}
-	if (!sync_serial && tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
-	    if (!hungup && errno != ENXIO)
-		warn("tcsetattr: %m");
-#ifndef CRTSCTS
-	if (!sync_serial && ioctl (fd, TCSETXF, &inittermiox) < 0){
-	    if (!hungup && errno != ENXIO)
-		error("TCSETXF: %m");
-	}
-#endif
-	if (!sync_serial)
-	    ioctl(fd, TIOCSWINSZ, &wsinfo);
-	restore_term = 0;
-    }
-}
-
-/*
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-void
-setdtr(fd, on)
-int fd, on;
-{
-    int modembits = TIOCM_DTR;
-
-    ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);
-}
-
-/*
- * open_loopback - open the device we use for getting packets
- * in demand mode.  Under Solaris 2, we use our existing fd
- * to the ppp driver.
- */
-int
-open_ppp_loopback()
-{
-    return pppfd;
-}
-
-/*
- * output - Output PPP packet.
- */
-void
-output(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    struct strbuf data;
-    int retries;
-    struct pollfd pfd;
-
-    if (debug)
-	dbglog("sent %P", p, len);
-
-    data.len = len;
-    data.buf = (caddr_t) p;
-    retries = 4;
-    while (putmsg(pppfd, NULL, &data, 0) < 0) {
-	if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) {
-	    if (errno != ENXIO)
-		error("Couldn't send packet: %m");
-	    break;
-	}
-	pfd.fd = pppfd;
-	pfd.events = POLLOUT;
-	poll(&pfd, 1, 250);	/* wait for up to 0.25 seconds */
-    }
-}
-
-
-/*
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_input(timo)
-    struct timeval *timo;
-{
-    int t;
-
-    t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000;
-    if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR)
-	fatal("poll: %m");
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(fd)
-    int fd;
-{
-    int n;
-
-    for (n = 0; n < n_pollfds; ++n)
-	if (pollfds[n].fd == fd)
-	    return;
-    if (n_pollfds < MAX_POLLFDS) {
-	pollfds[n_pollfds].fd = fd;
-	pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP;
-	++n_pollfds;
-    } else
-	error("Too many inputs!");
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(fd)
-    int fd;
-{
-    int n;
-
-    for (n = 0; n < n_pollfds; ++n) {
-	if (pollfds[n].fd == fd) {
-	    while (++n < n_pollfds)
-		pollfds[n-1] = pollfds[n];
-	    --n_pollfds;
-	    break;
-	}
-    }
-}
-
-#if 0
-/*
- * wait_loop_output - wait until there is data available on the
- * loopback, for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_loop_output(timo)
-    struct timeval *timo;
-{
-    wait_input(timo);
-}
-
-/*
- * wait_time - wait for a given length of time or until a
- * signal is received.
- */
-void
-wait_time(timo)
-    struct timeval *timo;
-{
-    int n;
-
-    n = select(0, NULL, NULL, NULL, timo);
-    if (n < 0 && errno != EINTR)
-	fatal("select: %m");
-}
-#endif
-
-
-/*
- * read_packet - get a PPP packet from the serial device.
- */
-int
-read_packet(buf)
-    u_char *buf;
-{
-    struct strbuf ctrl, data;
-    int flags, len;
-    unsigned char ctrlbuf[sizeof(union DL_primitives) + 64];
-
-    for (;;) {
-	data.maxlen = PPP_MRU + PPP_HDRLEN;
-	data.buf = (caddr_t) buf;
-	ctrl.maxlen = sizeof(ctrlbuf);
-	ctrl.buf = (caddr_t) ctrlbuf;
-	flags = 0;
-	len = getmsg(pppfd, &ctrl, &data, &flags);
-	if (len < 0) {
-	    if (errno == EAGAIN || errno == EINTR)
-		return -1;
-	    fatal("Error reading packet: %m");
-	}
-
-	if (ctrl.len <= 0)
-	    return data.len;
-
-	/*
-	 * Got a M_PROTO or M_PCPROTO message.  Interpret it
-	 * as a DLPI primitive??
-	 */
-	if (debug)
-	    dbglog("got dlpi prim 0x%x, len=%d",
-		   ((union DL_primitives *)ctrlbuf)->dl_primitive, ctrl.len);
-
-    }
-}
-
-/*
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output()
-{
-    int len;
-    int rv = 0;
-
-    while ((len = read_packet(inpacket_buf)) > 0) {
-	if (loop_frame(inpacket_buf, len))
-	    rv = 1;
-    }
-    return rv;
-}
-
-/*
- * netif_set_mtu - set the MTU on the PPP network interface.
- */
-void
-netif_set_mtu(unit, mtu)
-    int unit, mtu;
-{
-    struct ifreq ifr;
-#if defined(INET6) && defined(SOL2)
-    struct lifreq lifr;
-    int	fd;
-#endif /* defined(INET6) && defined(SOL2) */
-
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_metric = link_mtu;
-    if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) {
-	error("Couldn't set IP MTU (%s): %m", ifr.ifr_name);
-    }
-
-#if defined(INET6) && defined(SOL2) 
-    fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (fd < 0)
-	error("Couldn't open IPv6 socket: %m");
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    lifr.lifr_mtu = link_mtu;
-    if (ioctl(fd, SIOCSLIFMTU, &lifr) < 0) {
-	close(fd);
-	error("Couldn't set IPv6 MTU (%s): %m", ifr.ifr_name);
-    }
-    close(fd);
-#endif /* defined(INET6) && defined(SOL2) */
-}
-
-/*
- * tty_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-void
-tty_send_config(mtu, asyncmap, pcomp, accomp)
-    int mtu;
-    u_int32_t asyncmap;
-    int pcomp, accomp;
-{
-    int cf[2];
-
-    link_mtu = mtu;
-    if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) {
-	if (hungup && errno == ENXIO)
-	    return;
-	error("Couldn't set MTU: %m");
-    }
-    if (fdmuxid >= 0) {
-	if (!sync_serial) {
-	    if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-		error("Couldn't set transmit ACCM: %m");
-	    }
-	}
-	cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0);
-	cf[1] = COMP_PROT | COMP_AC;
-	if (any_compressions() &&
-	    strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	    error("Couldn't set prot/AC compression: %m");
-	}
-    }
-}
-
-/*
- * ppp_set_xaccm - set the extended transmit ACCM for the interface.
- */
-void
-tty_set_xaccm(accm)
-    ext_accm accm;
-{
-    if (sync_serial)
-	return;
-
-    if (fdmuxid >= 0
-	&& strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) {
-	if (!hungup || errno != ENXIO)
-	    warn("Couldn't set extended ACCM: %m");
-    }
-}
-
-/*
- * ppp_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-void
-tty_recv_config(mru, asyncmap, pcomp, accomp)
-    int mru;
-    u_int32_t asyncmap;
-    int pcomp, accomp;
-{
-    int cf[2];
-
-    link_mru = mru;
-    if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) {
-	if (hungup && errno == ENXIO)
-	    return;
-	error("Couldn't set MRU: %m");
-    }
-    if (fdmuxid >= 0) {
-	if (!sync_serial) {
-	    if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-		error("Couldn't set receive ACCM: %m");
-	    }
-	}
-	cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0);
-	cf[1] = DECOMP_PROT | DECOMP_AC;
-	if (any_compressions() &&
-	    strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	    error("Couldn't set prot/AC decompression: %m");
-	}
-    }
-}
-
-/*
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-int
-ccp_test(unit, opt_ptr, opt_len, for_transmit)
-    int unit, opt_len, for_transmit;
-    u_char *opt_ptr;
-{
-    if (strioctl(pppfd, (for_transmit? PPPIO_XCOMP: PPPIO_RCOMP),
-		 opt_ptr, opt_len, 0) >= 0)
-	return 1;
-    return (errno == ENOSR)? 0: -1;
-}
-
-/*
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-void
-ccp_flags_set(unit, isopen, isup)
-    int unit, isopen, isup;
-{
-    int cf[2];
-
-    cf[0] = (isopen? CCP_ISOPEN: 0) + (isup? CCP_ISUP: 0);
-    cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (!hungup || errno != ENXIO)
-	    error("Couldn't set kernel CCP state: %m");
-    }
-}
-
-/*
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
-    int u;
-    struct ppp_idle *ip;
-{
-    return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0;
-}
-
-/*
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
-    int u;
-    struct pppd_stats *stats;
-{
-    struct ppp_stats s;
-
-    if (!sync_serial && 
-	strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) {
-	error("Couldn't get link statistics: %m");
-	return 0;
-    }
-    stats->bytes_in = s.p.ppp_ibytes;
-    stats->bytes_out = s.p.ppp_obytes;
-    return 1;
-}
-
-#if 0
-/*
- * set_filters - transfer the pass and active filters to the kernel.
- */
-int
-set_filters(pass, active)
-    struct bpf_program *pass, *active;
-{
-    int ret = 1;
-
-    if (pass->bf_len > 0) {
-	if (strioctl(pppfd, PPPIO_PASSFILT, pass,
-		     sizeof(struct bpf_program), 0) < 0) {
-	    error("Couldn't set pass-filter in kernel: %m");
-	    ret = 0;
-	}
-    }
-    if (active->bf_len > 0) {
-	if (strioctl(pppfd, PPPIO_ACTIVEFILT, active,
-		     sizeof(struct bpf_program), 0) < 0) {
-	    error("Couldn't set active-filter in kernel: %m");
-	    ret = 0;
-	}
-    }
-    return ret;
-}
-#endif
-
-/*
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise.  This is necessary because of patent nonsense.
- */
-int
-ccp_fatal_error(unit)
-    int unit;
-{
-    int cf[2];
-
-    cf[0] = cf[1] = 0;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (errno != ENXIO && errno != EINVAL)
-	    error("Couldn't get compression flags: %m");
-	return 0;
-    }
-    return cf[0] & CCP_FATALERROR;
-}
-
-/*
- * sifvjcomp - config tcp header compression
- */
-int
-sifvjcomp(u, vjcomp, xcidcomp, xmaxcid)
-    int u, vjcomp, xcidcomp, xmaxcid;
-{
-    int cf[2];
-    char maxcid[2];
-
-    if (vjcomp) {
-	maxcid[0] = xcidcomp;
-	maxcid[1] = 15;		/* XXX should be rmaxcid */
-	if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) {
-	    error("Couldn't initialize VJ compression: %m");
-	}
-    }
-
-    cf[0] = (vjcomp? COMP_VJC + DECOMP_VJC: 0)	/* XXX this is wrong */
-	+ (xcidcomp? COMP_VJCCID + DECOMP_VJCCID: 0);
-    cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (vjcomp)
-	    error("Couldn't enable VJ compression: %m");
-    }
-
-    return 1;
-}
-
-/*
- * sifup - Config the interface up and enable IP packets to pass.
- */
-int
-sifup(u)
-    int u;
-{
-    struct ifreq ifr;
-
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface up (get): %m");
-	return 0;
-    }
-    ifr.ifr_flags |= IFF_UP;
-    if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface up (set): %m");
-	return 0;
-    }
-    if_is_up = 1;
-    return 1;
-}
-
-/*
- * sifdown - Config the interface down and disable IP.
- */
-int
-sifdown(u)
-    int u;
-{
-    struct ifreq ifr;
-
-    if (ipmuxid < 0)
-	return 1;
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface down (get): %m");
-	return 0;
-    }
-    ifr.ifr_flags &= ~IFF_UP;
-    if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface down (set): %m");
-	return 0;
-    }
-    if_is_up = 0;
-    return 1;
-}
-
-/*
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-int
-sifnpmode(u, proto, mode)
-    int u;
-    int proto;
-    enum NPmode mode;
-{
-    int npi[2];
-
-    npi[0] = proto;
-    npi[1] = (int) mode;
-    if (strioctl(pppfd, PPPIO_NPMODE, &npi, 2 * sizeof(int), 0) < 0) {
-	error("ioctl(set NP %d mode to %d): %m", proto, mode);
-	return 0;
-    }
-    return 1;
-}
-
-#if defined(SOL2) && defined(INET6)
-/*
- * sif6up - Config the IPv6 interface up and enable IPv6 packets to pass.
- */
-int
-sif6up(u)
-    int u;
-{
-    struct lifreq lifr;
-    int fd;
-
-    fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (fd < 0) {
-	return 0;
-    }
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    lifr.lifr_flags |= IFF_UP;
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    if (ioctl(fd, SIOCSLIFFLAGS, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    if6_is_up = 1;
-    close(fd);
-    return 1;
-}
-
-/*
- * sifdown - Config the IPv6 interface down and disable IPv6.
- */
-int
-sif6down(u)
-    int u;
-{
-    struct lifreq lifr;
-    int fd;
-
-    fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (fd < 0)
-	return 0;
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    lifr.lifr_flags &= ~IFF_UP;
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    if (ioctl(fd, SIOCGLIFFLAGS, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    if6_is_up = 0;
-    close(fd);
-    return 1;
-}
-
-/*
- * sif6addr - Config the interface with an IPv6 link-local address
- */
-int
-sif6addr(u, o, h)
-    int u;
-    eui64_t o, h;
-{
-    struct lifreq lifr;
-    struct sockaddr_storage laddr;
-    struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&laddr;
-    int fd;
-
-    fd = socket(AF_INET6, SOCK_DGRAM, 0);
-    if (fd < 0)
-	return 0;
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-
-    /*
-     * Do this because /dev/ppp responds to DL_PHYS_ADDR_REQ with
-     * zero values, hence the interface token came to be zero too,
-     * and without this, in.ndpd will complain
-     */
-    IN6_LLTOKEN_FROM_EUI64(lifr, sin6, o);
-    if (ioctl(fd, SIOCSLIFTOKEN, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    /*
-     * Set the interface address and destination address
-     */
-    IN6_LLADDR_FROM_EUI64(lifr, sin6, o);
-    if (ioctl(fd, SIOCSLIFADDR, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    memset(&lifr, 0, sizeof(lifr));
-    strlcpy(lifr.lifr_name, ifname, sizeof(lifr.lifr_name));
-    IN6_LLADDR_FROM_EUI64(lifr, sin6, h);
-    if (ioctl(fd, SIOCSLIFDSTADDR, &lifr) < 0) {
-	close(fd);
-	return 0;
-    }
-
-    return 1;
-}
-
-/*
- * cif6addr - Remove the IPv6 address from interface
- */
-int
-cif6addr(u, o, h)
-    int u;
-    eui64_t o, h;
-{
-    return 1;
-}
-
-#endif /* defined(SOL2) && defined(INET6) */
-
-
-#define INET_ADDR(x)	(((struct sockaddr_in *) &(x))->sin_addr.s_addr)
-
-/*
- * sifaddr - Config the interface IP addresses and netmask.
- */
-int
-sifaddr(u, o, h, m)
-    int u;
-    u_int32_t o, h, m;
-{
-    struct ifreq ifr;
-    int ret = 1;
-
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_addr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_addr) = m;
-    if (ioctl(ipfd, SIOCSIFNETMASK, &ifr) < 0) {
-	error("Couldn't set IP netmask: %m");
-	ret = 0;
-    }
-    ifr.ifr_addr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_addr) = o;
-    if (ioctl(ipfd, SIOCSIFADDR, &ifr) < 0) {
-	error("Couldn't set local IP address: %m");
-	ret = 0;
-    }
-
-    /*
-     * On some systems, we have to explicitly set the point-to-point
-     * flag bit before we can set a destination address.
-     */
-    if (ioctl(ipfd, SIOCGIFFLAGS, &ifr) >= 0
-	&& (ifr.ifr_flags & IFF_POINTOPOINT) == 0) {
-	ifr.ifr_flags |= IFF_POINTOPOINT;
-	if (ioctl(ipfd, SIOCSIFFLAGS, &ifr) < 0) {
-	    error("Couldn't mark interface pt-to-pt: %m");
-	    ret = 0;
-	}
-    }
-    ifr.ifr_dstaddr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_dstaddr) = h;
-    if (ioctl(ipfd, SIOCSIFDSTADDR, &ifr) < 0) {
-	error("Couldn't set remote IP address: %m");
-	ret = 0;
-    }
-#if 0	/* now done in ppp_send_config */
-    ifr.ifr_metric = link_mtu;
-    if (ioctl(ipfd, SIOCSIFMTU, &ifr) < 0) {
-	error("Couldn't set IP MTU: %m");
-    }
-#endif
-
-    remote_addr = h;
-    return ret;
-}
-
-/*
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-int
-cifaddr(u, o, h)
-    int u;
-    u_int32_t o, h;
-{
-#if defined(__USLC__)		/* was: #if 0 */
-    cifroute(unit, ouraddr, hisaddr);
-    if (ipmuxid >= 0) {
-	notice("Removing ppp interface unit");
-	if (ioctl(ipfd, I_UNLINK, ipmuxid) < 0) {
-	    error("Can't remove ppp interface unit: %m");
-	    return 0;
-	}
-	ipmuxid = -1;
-    }
-#endif
-    remote_addr = 0;
-    return 1;
-}
-
-/*
- * sifdefaultroute - assign a default route through the address given.
- */
-int
-sifdefaultroute(u, l, g)
-    int u;
-    u_int32_t l, g;
-{
-    struct rtentry rt;
-
-#if defined(__USLC__)
-    g = l;			/* use the local address as gateway */
-#endif
-    memset(&rt, 0, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = 0;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = g;
-    rt.rt_flags = RTF_GATEWAY;
-
-    if (ioctl(ipfd, SIOCADDRT, &rt) < 0) {
-	error("Can't add default route: %m");
-	return 0;
-    }
-
-    default_route_gateway = g;
-    return 1;
-}
-
-/*
- * cifdefaultroute - delete a default route through the address given.
- */
-int
-cifdefaultroute(u, l, g)
-    int u;
-    u_int32_t l, g;
-{
-    struct rtentry rt;
-
-#if defined(__USLC__)
-    g = l;			/* use the local address as gateway */
-#endif
-    memset(&rt, 0, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = 0;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = g;
-    rt.rt_flags = RTF_GATEWAY;
-
-    if (ioctl(ipfd, SIOCDELRT, &rt) < 0) {
-	error("Can't delete default route: %m");
-	return 0;
-    }
-
-    default_route_gateway = 0;
-    return 1;
-}
-
-/*
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-int
-sifproxyarp(unit, hisaddr)
-    int unit;
-    u_int32_t hisaddr;
-{
-    struct arpreq arpreq;
-
-    memset(&arpreq, 0, sizeof(arpreq));
-    if (!get_ether_addr(hisaddr, &arpreq.arp_ha))
-	return 0;
-
-    arpreq.arp_pa.sa_family = AF_INET;
-    INET_ADDR(arpreq.arp_pa) = hisaddr;
-    arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-    if (ioctl(ipfd, SIOCSARP, (caddr_t) &arpreq) < 0) {
-	error("Couldn't set proxy ARP entry: %m");
-	return 0;
-    }
-
-    proxy_arp_addr = hisaddr;
-    return 1;
-}
-
-/*
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-int
-cifproxyarp(unit, hisaddr)
-    int unit;
-    u_int32_t hisaddr;
-{
-    struct arpreq arpreq;
-
-    memset(&arpreq, 0, sizeof(arpreq));
-    arpreq.arp_pa.sa_family = AF_INET;
-    INET_ADDR(arpreq.arp_pa) = hisaddr;
-    if (ioctl(ipfd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-	error("Couldn't delete proxy ARP entry: %m");
-	return 0;
-    }
-
-    proxy_arp_addr = 0;
-    return 1;
-}
-
-/*
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-#define MAX_IFS		32
-
-static int
-get_ether_addr(ipaddr, hwaddr)
-    u_int32_t ipaddr;
-    struct sockaddr *hwaddr;
-{
-    struct ifreq *ifr, *ifend, ifreq;
-    int nif;
-    struct ifconf ifc;
-    u_int32_t ina, mask;
-
-    /*
-     * Scan through the system's network interfaces.
-     */
-#ifdef SIOCGIFNUM
-    if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0)
-#endif
-	nif = MAX_IFS;
-    ifc.ifc_len = nif * sizeof(struct ifreq);
-    ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len);
-    if (ifc.ifc_buf == 0)
-	return 0;
-    if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) {
-	warn("Couldn't get system interface list: %m");
-	free(ifc.ifc_buf);
-	return 0;
-    }
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	/*
-	 * Check that the interface is up, and not point-to-point or loopback.
-	 */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	if ((ifreq.ifr_flags &
-	     (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
-	    != (IFF_UP|IFF_BROADCAST))
-	    continue;
-	/*
-	 * Get its netmask and check that it's on the right subnet.
-	 */
-	if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	ina = INET_ADDR(ifr->ifr_addr);
-	mask = INET_ADDR(ifreq.ifr_addr);
-	if ((ipaddr & mask) == (ina & mask))
-	    break;
-    }
-
-    if (ifr >= ifend) {
-	warn("No suitable interface found for proxy ARP");
-	free(ifc.ifc_buf);
-	return 0;
-    }
-
-    info("found interface %s for proxy ARP", ifr->ifr_name);
-    if (!get_hw_addr(ifr->ifr_name, ina, hwaddr)) {
-	error("Couldn't get hardware address for %s", ifr->ifr_name);
-	free(ifc.ifc_buf);
-	return 0;
-    }
-
-    free(ifc.ifc_buf);
-    return 1;
-}
-
-/*
- * get_hw_addr_dlpi - obtain the hardware address using DLPI
- */
-static int
-get_hw_addr_dlpi(name, hwaddr)
-    char *name;
-    struct sockaddr *hwaddr;
-{
-    char *p, *q;
-    int unit, iffd, adrlen;
-    unsigned char *adrp;
-    char ifdev[24];
-    struct {
-	union DL_primitives prim;
-	char space[64];
-    } reply;
-
-    /*
-     * We have to open the device and ask it for its hardware address.
-     * First split apart the device name and unit.
-     */
-    slprintf(ifdev, sizeof(ifdev), "/dev/%s", name);
-    for (q = ifdev + strlen(ifdev); --q >= ifdev; )
-	if (!isdigit(*q))
-	    break;
-    unit = atoi(q+1);
-    q[1] = 0;
-
-    /*
-     * Open the device and do a DLPI attach and phys_addr_req.
-     */
-    iffd = open(ifdev, O_RDWR);
-    if (iffd < 0) {
-	error("Can't open %s: %m", ifdev);
-	return 0;
-    }
-    if (dlpi_attach(iffd, unit) < 0
-	|| dlpi_get_reply(iffd, &reply.prim, DL_OK_ACK, sizeof(reply)) < 0
-	|| dlpi_info_req(iffd) < 0
-	|| dlpi_get_reply(iffd, &reply.prim, DL_INFO_ACK, sizeof(reply)) < 0) {
-	close(iffd);
-	return 0;
-    }
-
-    adrlen = reply.prim.info_ack.dl_addr_length;
-    adrp = (unsigned char *)&reply + reply.prim.info_ack.dl_addr_offset;
-
-#if DL_CURRENT_VERSION >= 2
-    if (reply.prim.info_ack.dl_sap_length < 0)
-	adrlen += reply.prim.info_ack.dl_sap_length;
-    else
-	adrp += reply.prim.info_ack.dl_sap_length;
-#endif
-
-    hwaddr->sa_family = AF_UNSPEC;
-    memcpy(hwaddr->sa_data, adrp, adrlen);
-
-    return 1;
-}
-/*
- * get_hw_addr - obtain the hardware address for a named interface.
- */
-static int
-get_hw_addr(name, ina, hwaddr)
-    char *name;
-    u_int32_t ina;
-    struct sockaddr *hwaddr;
-{
-    /* New way - get the address by doing an arp request. */
-    int s;
-    struct arpreq req;
-
-    s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s < 0)
-	return 0;
-    memset(&req, 0, sizeof(req));
-    req.arp_pa.sa_family = AF_INET;
-    INET_ADDR(req.arp_pa) = ina;
-    if (ioctl(s, SIOCGARP, &req) < 0) {
-	error("Couldn't get ARP entry for %s: %m", ip_ntoa(ina));
-	return 0;
-    }
-    *hwaddr = req.arp_ha;
-    hwaddr->sa_family = AF_UNSPEC;
-
-    return 1;
-}
-
-static int
-dlpi_attach(fd, ppa)
-    int fd, ppa;
-{
-    dl_attach_req_t req;
-    struct strbuf buf;
-
-    req.dl_primitive = DL_ATTACH_REQ;
-    req.dl_ppa = ppa;
-    buf.len = sizeof(req);
-    buf.buf = (void *) &req;
-    return putmsg(fd, &buf, NULL, RS_HIPRI);
-}
-
-static int
-dlpi_info_req(fd)
-    int fd;
-{
-    dl_info_req_t req;
-    struct strbuf buf;
-
-    req.dl_primitive = DL_INFO_REQ;
-    buf.len = sizeof(req);
-    buf.buf = (void *) &req;
-    return putmsg(fd, &buf, NULL, RS_HIPRI);
-}
-
-static int
-dlpi_get_reply(fd, reply, expected_prim, maxlen)
-    union DL_primitives *reply;
-    int fd, expected_prim, maxlen;
-{
-    struct strbuf buf;
-    int flags, n;
-    struct pollfd pfd;
-
-    /*
-     * Use poll to wait for a message with a timeout.
-     */
-    pfd.fd = fd;
-    pfd.events = POLLIN | POLLPRI;
-    do {
-	n = poll(&pfd, 1, 1000);
-    } while (n == -1 && errno == EINTR);
-    if (n <= 0)
-	return -1;
-
-    /*
-     * Get the reply.
-     */
-    buf.maxlen = maxlen;
-    buf.buf = (void *) reply;
-    flags = 0;
-    if (getmsg(fd, &buf, NULL, &flags) < 0)
-	return -1;
-
-    if (buf.len < sizeof(ulong)) {
-	if (debug)
-	    dbglog("dlpi response short (len=%d)\n", buf.len);
-	return -1;
-    }
-
-    if (reply->dl_primitive == expected_prim)
-	return 0;
-
-    if (debug) {
-	if (reply->dl_primitive == DL_ERROR_ACK) {
-	    dbglog("dlpi error %d (unix errno %d) for prim %x\n",
-		   reply->error_ack.dl_errno, reply->error_ack.dl_unix_errno,
-		   reply->error_ack.dl_error_primitive);
-	} else {
-	    dbglog("dlpi unexpected response prim %x\n",
-		   reply->dl_primitive);
-	}
-    }
-
-    return -1;
-}
-
-/*
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'.  If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-u_int32_t
-GetMask(addr)
-    u_int32_t addr;
-{
-    u_int32_t mask, nmask, ina;
-    struct ifreq *ifr, *ifend, ifreq;
-    int nif;
-    struct ifconf ifc;
-
-    addr = ntohl(addr);
-    if (IN_CLASSA(addr))	/* determine network mask for address class */
-	nmask = IN_CLASSA_NET;
-    else if (IN_CLASSB(addr))
-	nmask = IN_CLASSB_NET;
-    else
-	nmask = IN_CLASSC_NET;
-    /* class D nets are disallowed by bad_ip_adrs */
-    mask = netmask | htonl(nmask);
-
-    /*
-     * Scan through the system's network interfaces.
-     */
-#ifdef SIOCGIFNUM
-    if (ioctl(ipfd, SIOCGIFNUM, &nif) < 0)
-#endif
-	nif = MAX_IFS;
-    ifc.ifc_len = nif * sizeof(struct ifreq);
-    ifc.ifc_buf = (caddr_t) malloc(ifc.ifc_len);
-    if (ifc.ifc_buf == 0)
-	return mask;
-    if (ioctl(ipfd, SIOCGIFCONF, &ifc) < 0) {
-	warn("Couldn't get system interface list: %m");
-	free(ifc.ifc_buf);
-	return mask;
-    }
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
-	/*
-	 * Check the interface's internet address.
-	 */
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	ina = INET_ADDR(ifr->ifr_addr);
-	if ((ntohl(ina) & nmask) != (addr & nmask))
-	    continue;
-	/*
-	 * Check that the interface is up, and not point-to-point or loopback.
-	 */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(ipfd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK))
-	    != IFF_UP)
-	    continue;
-	/*
-	 * Get its netmask and OR it into our mask.
-	 */
-	if (ioctl(ipfd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	mask |= INET_ADDR(ifreq.ifr_addr);
-    }
-
-    free(ifc.ifc_buf);
-    return mask;
-}
-
-/*
- * logwtmp - write an accounting record to the /var/adm/wtmp file.
- */
-void
-logwtmp(line, name, host)
-    const char *line, *name, *host;
-{
-    static struct utmpx utmpx;
-
-    if (name[0] != 0) {
-	/* logging in */
-	strncpy(utmpx.ut_user, name, sizeof(utmpx.ut_user));
-	strncpy(utmpx.ut_id, ifname, sizeof(utmpx.ut_id));
-	strncpy(utmpx.ut_line, line, sizeof(utmpx.ut_line));
-	utmpx.ut_pid = getpid();
-	utmpx.ut_type = USER_PROCESS;
-    } else {
-	utmpx.ut_type = DEAD_PROCESS;
-    }
-    gettimeofday(&utmpx.ut_tv, NULL);
-    updwtmpx("/var/adm/wtmpx", &utmpx);
-}
-
-/*
- * get_host_seed - return the serial number of this machine.
- */
-int
-get_host_seed()
-{
-    char buf[32];
-
-    if (sysinfo(SI_HW_SERIAL, buf, sizeof(buf)) < 0) {
-	error("sysinfo: %m");
-	return 0;
-    }
-    return (int) strtoul(buf, NULL, 16);
-}
-
-static int
-strioctl(fd, cmd, ptr, ilen, olen)
-    int fd, cmd, ilen, olen;
-    void *ptr;
-{
-    struct strioctl str;
-
-    str.ic_cmd = cmd;
-    str.ic_timout = 0;
-    str.ic_len = ilen;
-    str.ic_dp = ptr;
-    if (ioctl(fd, I_STR, &str) == -1)
-	return -1;
-    if (str.ic_len != olen)
-	dbglog("strioctl: expected %d bytes, got %d for cmd %x\n",
-	       olen, str.ic_len, cmd);
-    return 0;
-}
-
-#if 0
-/*
- * lock - create a lock file for the named lock device
- */
-
-#define LOCK_PREFIX	"/var/spool/locks/LK."
-static char lock_file[40];	/* name of lock file created */
-
-int
-lock(dev)
-    char *dev;
-{
-    int n, fd, pid;
-    struct stat sbuf;
-    char ascii_pid[12];
-
-    if (stat(dev, &sbuf) < 0) {
-	error("Can't get device number for %s: %m", dev);
-	return -1;
-    }
-    if ((sbuf.st_mode & S_IFMT) != S_IFCHR) {
-	error("Can't lock %s: not a character device", dev);
-	return -1;
-    }
-    slprintf(lock_file, sizeof(lock_file), "%s%03d.%03d.%03d",
-	     LOCK_PREFIX, major(sbuf.st_dev),
-	     major(sbuf.st_rdev), minor(sbuf.st_rdev));
-
-    while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
-	if (errno == EEXIST
-	    && (fd = open(lock_file, O_RDONLY, 0)) >= 0) {
-	    /* Read the lock file to find out who has the device locked */
-	    n = read(fd, ascii_pid, 11);
-	    if (n <= 0) {
-		error("Can't read pid from lock file %s", lock_file);
-		close(fd);
-	    } else {
-		ascii_pid[n] = 0;
-		pid = atoi(ascii_pid);
-		if (pid > 0 && kill(pid, 0) == -1 && errno == ESRCH) {
-		    /* pid no longer exists - remove the lock file */
-		    if (unlink(lock_file) == 0) {
-			close(fd);
-			notice("Removed stale lock on %s (pid %d)",
-			       dev, pid);
-			continue;
-		    } else
-			warn("Couldn't remove stale lock on %s",
-			       dev);
-		} else
-		    notice("Device %s is locked by pid %d",
-			   dev, pid);
-	    }
-	    close(fd);
-	} else
-	    error("Can't create lock file %s: %m", lock_file);
-	lock_file[0] = 0;
-	return -1;
-    }
-
-    slprintf(ascii_pid, sizeof(ascii_pid), "%10d\n", getpid());
-    write(fd, ascii_pid, 11);
-
-    close(fd);
-    return 1;
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
-    if (lock_file[0]) {
-	unlink(lock_file);
-	lock_file[0] = 0;
-    }
-}
-#endif
-
-/*
- * cifroute - delete a route through the addresses given.
- */
-int
-cifroute(u, our, his)
-    int u;
-    u_int32_t our, his;
-{
-    struct rtentry rt;
-
-    memset(&rt, 0, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = his;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = our;
-    rt.rt_flags = RTF_HOST;
-
-    if (ioctl(ipfd, SIOCDELRT, &rt) < 0) {
-	error("Can't delete route: %m");
-	return 0;
-    }
-
-    return 1;
-}
-
-/*
- * have_route_to - determine if the system has a route to the specified
- * IP address.  Returns 0 if not, 1 if so, -1 if we can't tell.
- * `addr' is in network byte order.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-#ifndef T_CURRENT		/* needed for Solaris 2.5 */
-#define T_CURRENT	MI_T_CURRENT
-#endif
-
-int
-have_route_to(addr)
-    u_int32_t addr;
-{
-#ifdef SOL2
-    int fd, r, flags, i;
-    struct {
-	struct T_optmgmt_req req;
-	struct opthdr hdr;
-    } req;
-    union {
-	struct T_optmgmt_ack ack;
-	unsigned char space[64];
-    } ack;
-    struct opthdr *rh;
-    struct strbuf cbuf, dbuf;
-    int nroutes;
-    mib2_ipRouteEntry_t routes[8];
-    mib2_ipRouteEntry_t *rp;
-
-    fd = open(mux_dev_name, O_RDWR);
-    if (fd < 0) {
-	warn("have_route_to: couldn't open %s: %m", mux_dev_name);
-	return -1;
-    }
-
-    req.req.PRIM_type = T_OPTMGMT_REQ;
-    req.req.OPT_offset = (char *) &req.hdr - (char *) &req;
-    req.req.OPT_length = sizeof(req.hdr);
-    req.req.MGMT_flags = T_CURRENT;
-
-    req.hdr.level = MIB2_IP;
-    req.hdr.name = 0;
-    req.hdr.len = 0;
-
-    cbuf.buf = (char *) &req;
-    cbuf.len = sizeof(req);
-
-    if (putmsg(fd, &cbuf, NULL, 0) == -1) {
-	warn("have_route_to: putmsg: %m");
-	close(fd);
-	return -1;
-    }
-
-    for (;;) {
-	cbuf.buf = (char *) &ack;
-	cbuf.maxlen = sizeof(ack);
-	dbuf.buf = (char *) routes;
-	dbuf.maxlen = sizeof(routes);
-	flags = 0;
-	r = getmsg(fd, &cbuf, &dbuf, &flags);
-	if (r == -1) {
-	    warn("have_route_to: getmsg: %m");
-	    close(fd);
-	    return -1;
-	}
-
-	if (cbuf.len < sizeof(struct T_optmgmt_ack)
-	    || ack.ack.PRIM_type != T_OPTMGMT_ACK
-	    || ack.ack.MGMT_flags != T_SUCCESS
-	    || ack.ack.OPT_length < sizeof(struct opthdr)) {
-	    dbglog("have_route_to: bad message len=%d prim=%d",
-		   cbuf.len, ack.ack.PRIM_type);
-	    close(fd);
-	    return -1;
-	}
-
-	rh = (struct opthdr *) ((char *)&ack + ack.ack.OPT_offset);
-	if (rh->level == 0 && rh->name == 0)
-	    break;
-	if (rh->level != MIB2_IP || rh->name != MIB2_IP_21) {
-	    while (r == MOREDATA)
-		r = getmsg(fd, NULL, &dbuf, &flags);
-	    continue;
-	}
-
-	for (;;) {
-	    nroutes = dbuf.len / sizeof(mib2_ipRouteEntry_t);
-	    for (rp = routes, i = 0; i < nroutes; ++i, ++rp) {
-		if (rp->ipRouteMask != ~0) {
-		    dbglog("have_route_to: dest=%x gw=%x mask=%x\n",
-			   rp->ipRouteDest, rp->ipRouteNextHop,
-			   rp->ipRouteMask);
-		    if (((addr ^ rp->ipRouteDest) & rp->ipRouteMask) == 0
-			&& rp->ipRouteNextHop != remote_addr)
-			return 1;
-		}
-	    }
-	    if (r == 0)
-		break;
-	    r = getmsg(fd, NULL, &dbuf, &flags);
-	}
-    }
-    close(fd);
-    return 0;
-#else
-    return -1;
-#endif /* SOL2 */
-}
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side to
- * the uid given.  Assumes slave_name points to MAXPATHLEN bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
-    int *master_fdp;
-    int *slave_fdp;
-    char *slave_name;
-    int uid;
-{
-    int mfd, sfd;
-    char *pty_name;
-    struct termios tios;
-
-    mfd = open("/dev/ptmx", O_RDWR);
-    if (mfd < 0) {
-	error("Couldn't open pty master: %m");
-	return 0;
-    }
-
-    pty_name = ptsname(mfd);
-    if (pty_name == NULL) {
-	error("Couldn't get name of pty slave");
-	close(mfd);
-	return 0;
-    }
-    if (chown(pty_name, uid, -1) < 0)
-	warn("Couldn't change owner of pty slave: %m");
-    if (chmod(pty_name, S_IRUSR | S_IWUSR) < 0)
-	warn("Couldn't change permissions on pty slave: %m");
-    if (unlockpt(mfd) < 0)
-	warn("Couldn't unlock pty slave: %m");
-
-    sfd = open(pty_name, O_RDWR);
-    if (sfd < 0) {
-	error("Couldn't open pty slave %s: %m", pty_name);
-	close(mfd);
-	return 0;
-    }
-    if (ioctl(sfd, I_PUSH, "ptem") < 0)
-	warn("Couldn't push ptem module on pty slave: %m");
-
-    dbglog("Using %s", pty_name);
-    strlcpy(slave_name, pty_name, MAXPATHLEN);
-    *master_fdp = mfd;
-    *slave_fdp = sfd;
-
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/sys-sunos4.c b/mdk-stage1/ppp/pppd/sys-sunos4.c
deleted file mode 100644
index 3344948e9..000000000
--- a/mdk-stage1/ppp/pppd/sys-sunos4.c
+++ /dev/null
@@ -1,1559 +0,0 @@
-/*
- * System-dependent procedures for pppd under SunOS 4.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <termios.h>
-#include <signal.h>
-#include <malloc.h>
-#include <utmp.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/stat.h>
-#include <sys/time.h>
-#include <sys/poll.h>
-#include <net/if.h>
-#include <net/if_arp.h>
-#include <net/nit_if.h>
-#include <net/route.h>
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include <netinet/in.h>
-
-#include "pppd.h"
-
-#if defined(sun) && defined(sparc)
-#include <alloca.h>
-#ifndef __GNUC__
-extern void *alloca();
-#endif
-#endif /*sparc*/
-
-static const char rcsid[] = RCSID;
-
-static int	pppfd;
-static int	fdmuxid = -1;
-static int	iffd;
-static int	sockfd;
-
-static int	restore_term;
-static struct termios inittermios;
-static struct winsize wsinfo;	/* Initial window size info */
-static pid_t	parent_pid;	/* PID of our parent */
-
-extern u_char	inpacket_buf[];	/* borrowed from main.c */
-
-#define MAX_POLLFDS	32
-static struct pollfd pollfds[MAX_POLLFDS];
-static int n_pollfds;
-
-static int	link_mtu, link_mru;
-
-#define NMODULES	32
-static int	tty_nmodules;
-static char	tty_modules[NMODULES][FMNAMESZ+1];
-
-static int	if_is_up;	/* Interface has been marked up */
-static u_int32_t ifaddrs[2];	/* local and remote addresses */
-static u_int32_t default_route_gateway;	/* Gateway for default route added */
-static u_int32_t proxy_arp_addr;	/* Addr for proxy arp entry added */
-
-/* Prototypes for procedures local to this file. */
-static int translate_speed __P((int));
-static int baud_rate_of __P((int));
-static int get_ether_addr __P((u_int32_t, struct sockaddr *));
-static int strioctl __P((int, int, void *, int, int));
-
-
-/*
- * sys_init - System-dependent initialization.
- */
-void
-sys_init()
-{
-    int x;
-
-    /* Get an internet socket for doing socket ioctl's on. */
-    if ((sockfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
-	fatal("Couldn't create IP socket: %m");
-
-    /*
-     * We may want to send a SIGHUP to the session leader associated
-     * with our controlling terminal later.  Because SunOS doesn't
-     * have getsid(), we make do with sending the signal to our
-     * parent process.
-     */
-    parent_pid = getppid();
-
-    /*
-     * Open the ppp device.
-     */
-    pppfd = open("/dev/ppp", O_RDWR | O_NONBLOCK, 0);
-    if (pppfd < 0)
-	fatal("Can't open /dev/ppp: %m");
-    if (kdebugflag) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(pppfd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-
-    /* Assign a new PPA and get its unit number. */
-    if (strioctl(pppfd, PPPIO_NEWPPA, &ifunit, 0, sizeof(int)) < 0)
-	fatal("Can't create new PPP interface: %m");
-
-    /*
-     * Open the ppp device again and push the if_ppp module on it.
-     */
-    iffd = open("/dev/ppp", O_RDWR, 0);
-    if (iffd < 0)
-	fatal("Can't open /dev/ppp (2): %m");
-    if (kdebugflag) {
-	x = PPPDBG_LOG + PPPDBG_DRIVER;
-	strioctl(iffd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-    if (strioctl(iffd, PPPIO_ATTACH, &ifunit, sizeof(int), 0) < 0)
-	fatal("Couldn't attach ppp interface to device: %m");
-    if (ioctl(iffd, I_PUSH, "if_ppp") < 0)
-	fatal("Can't push ppp interface module: %m");
-    if (kdebugflag) {
-	x = PPPDBG_LOG + PPPDBG_IF;
-	strioctl(iffd, PPPIO_DEBUG, &x, sizeof(int), 0);
-    }
-    if (strioctl(iffd, PPPIO_NEWPPA, &ifunit, sizeof(int), 0) < 0)
-	fatal("Couldn't create ppp interface unit: %m");
-    x = PPP_IP;
-    if (strioctl(iffd, PPPIO_BIND, &x, sizeof(int), 0) < 0)
-	fatal("Couldn't bind ppp interface to IP SAP: %m");
-
-    n_pollfds = 0;
-}
-
-/*
- * sys_cleanup - restore any system state we modified before exiting:
- * mark the interface down, delete default route and/or proxy arp entry.
- * This shouldn't call die() because it's called from die().
- */
-void
-sys_cleanup()
-{
-    if (if_is_up)
-	sifdown(0);
-    if (ifaddrs[0])
-	cifaddr(0, ifaddrs[0], ifaddrs[1]);
-    if (default_route_gateway)
-	cifdefaultroute(0, 0, default_route_gateway);
-    if (proxy_arp_addr)
-	cifproxyarp(0, proxy_arp_addr);
-}
-
-/*
- * sys_close - Clean up in a child process before execing.
- */
-void
-sys_close()
-{
-    close(iffd);
-    close(pppfd);
-    close(sockfd);
-}
-
-/*
- * sys_check_options - check the options that the user specified
- */
-int
-sys_check_options()
-{
-    return 1;
-}
-
-#if 0
-/*
- * daemon - Detach us from controlling terminal session.
- */
-int
-daemon(nochdir, noclose)
-    int nochdir, noclose;
-{
-    int pid;
-
-    if ((pid = fork()) < 0)
-	return -1;
-    if (pid != 0)
-	exit(0);		/* parent dies */
-    setsid();
-    if (!nochdir)
-	chdir("/");
-    if (!noclose) {
-	fclose(stdin);		/* don't need stdin, stdout, stderr */
-	fclose(stdout);
-	fclose(stderr);
-    }
-    return 0;
-}
-#endif
-
-/*
- * ppp_available - check whether the system has any ppp interfaces
- */
-int
-ppp_available()
-{
-    struct stat buf;
-
-    return stat("/dev/ppp", &buf) >= 0;
-}
-
-/*
- * tty_establish_ppp - Turn the serial port into a ppp interface.
- */
-int
-tty_establish_ppp(fd)
-    int fd;
-{
-    int i;
-
-    /* Pop any existing modules off the tty stream. */
-    for (i = 0;; ++i)
-	if (ioctl(fd, I_LOOK, tty_modules[i]) < 0
-	    || ioctl(fd, I_POP, 0) < 0)
-	    break;
-    tty_nmodules = i;
-
-    /* Push the async hdlc module and the compressor module. */
-    if (ioctl(fd, I_PUSH, "ppp_ahdl") < 0)
-	fatal("Couldn't push PPP Async HDLC module: %m");
-    if (ioctl(fd, I_PUSH, "ppp_comp") < 0)
-	error("Couldn't push PPP compression module: %m");
-
-    /* Link the serial port under the PPP multiplexor. */
-    if ((fdmuxid = ioctl(pppfd, I_LINK, fd)) < 0)
-	fatal("Can't link tty to PPP mux: %m");
-
-    return pppfd;
-}
-
-/*
- * disestablish_ppp - Restore the serial port to normal operation.
- * It attempts to reconstruct the stream with the previously popped
- * modules.  This shouldn't call die() because it's called from die().
- */
-void
-tty_disestablish_ppp(fd)
-    int fd;
-{
-    int i;
-
-    if (fdmuxid >= 0) {
-	if (ioctl(pppfd, I_UNLINK, fdmuxid) < 0) {
-	    if (!hungup)
-		error("Can't unlink tty from PPP mux: %m");
-	}
-	fdmuxid = -1;
-
-	if (!hungup) {
-	    while (ioctl(fd, I_POP, 0) >= 0)
-		;
-	    for (i = tty_nmodules - 1; i >= 0; --i)
-		if (ioctl(fd, I_PUSH, tty_modules[i]) < 0)
-		    error("Couldn't restore tty module %s: %m",
-			   tty_modules[i]);
-	}
-	if (hungup && default_device && parent_pid > 0) {
-	    /*
-	     * If we have received a hangup, we need to send a SIGHUP
-	     * to the terminal's controlling process.  The reason is
-	     * that the original stream head for the terminal hasn't
-	     * seen the M_HANGUP message (it went up through the ppp
-	     * driver to the stream head for our fd to /dev/ppp).
-	     * Actually we send the signal to the process that invoked
-	     * pppd, since SunOS doesn't have getsid().
-	     */
-	    kill(parent_pid, SIGHUP);
-	}
-    }
-}
-
-/*
- * Check whether the link seems not to be 8-bit clean.
- */
-void
-clean_check()
-{
-    int x;
-    char *s;
-
-    if (strioctl(pppfd, PPPIO_GCLEAN, &x, 0, sizeof(x)) < 0)
-	return;
-    s = NULL;
-    switch (~x) {
-    case RCV_B7_0:
-	s = "bit 7 set to 1";
-	break;
-    case RCV_B7_1:
-	s = "bit 7 set to 0";
-	break;
-    case RCV_EVNP:
-	s = "odd parity";
-	break;
-    case RCV_ODDP:
-	s = "even parity";
-	break;
-    }
-    if (s != NULL) {
-	warn("Serial link is not 8-bit clean:");
-	warn("All received characters had %s", s);
-    }
-}
-
-/*
- * List of valid speeds.
- */
-struct speed {
-    int speed_int, speed_val;
-} speeds[] = {
-#ifdef B50
-    { 50, B50 },
-#endif
-#ifdef B75
-    { 75, B75 },
-#endif
-#ifdef B110
-    { 110, B110 },
-#endif
-#ifdef B134
-    { 134, B134 },
-#endif
-#ifdef B150
-    { 150, B150 },
-#endif
-#ifdef B200
-    { 200, B200 },
-#endif
-#ifdef B300
-    { 300, B300 },
-#endif
-#ifdef B600
-    { 600, B600 },
-#endif
-#ifdef B1200
-    { 1200, B1200 },
-#endif
-#ifdef B1800
-    { 1800, B1800 },
-#endif
-#ifdef B2000
-    { 2000, B2000 },
-#endif
-#ifdef B2400
-    { 2400, B2400 },
-#endif
-#ifdef B3600
-    { 3600, B3600 },
-#endif
-#ifdef B4800
-    { 4800, B4800 },
-#endif
-#ifdef B7200
-    { 7200, B7200 },
-#endif
-#ifdef B9600
-    { 9600, B9600 },
-#endif
-#ifdef B19200
-    { 19200, B19200 },
-#endif
-#ifdef B38400
-    { 38400, B38400 },
-#endif
-#ifdef EXTA
-    { 19200, EXTA },
-#endif
-#ifdef EXTB
-    { 38400, EXTB },
-#endif
-#ifdef B57600
-    { 57600, B57600 },
-#endif
-#ifdef B115200
-    { 115200, B115200 },
-#endif
-    { 0, 0 }
-};
-
-/*
- * Translate from bits/second to a speed_t.
- */
-static int
-translate_speed(bps)
-    int bps;
-{
-    struct speed *speedp;
-
-    if (bps == 0)
-	return 0;
-    for (speedp = speeds; speedp->speed_int; speedp++)
-	if (bps == speedp->speed_int)
-	    return speedp->speed_val;
-    warn("speed %d not supported", bps);
-    return 0;
-}
-
-/*
- * Translate from a speed_t to bits/second.
- */
-static int
-baud_rate_of(speed)
-    int speed;
-{
-    struct speed *speedp;
-
-    if (speed == 0)
-	return 0;
-    for (speedp = speeds; speedp->speed_int; speedp++)
-	if (speed == speedp->speed_val)
-	    return speedp->speed_int;
-    return 0;
-}
-
-/*
- * set_up_tty: Set up the serial port on `fd' for 8 bits, no parity,
- * at the requested speed, etc.  If `local' is true, set CLOCAL
- * regardless of whether the modem option was specified.
- */
-void
-set_up_tty(fd, local)
-    int fd, local;
-{
-    int speed;
-    struct termios tios;
-
-    if (tcgetattr(fd, &tios) < 0)
-	fatal("tcgetattr: %m");
-
-    if (!restore_term) {
-	inittermios = tios;
-	ioctl(fd, TIOCGWINSZ, &wsinfo);
-    }
-
-    tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CLOCAL);
-    if (crtscts > 0)
-	tios.c_cflag |= CRTSCTS;
-    else if (crtscts < 0)
-	tios.c_cflag &= ~CRTSCTS;
-
-    tios.c_cflag |= CS8 | CREAD | HUPCL;
-    if (local || !modem)
-	tios.c_cflag |= CLOCAL;
-    tios.c_iflag = IGNBRK | IGNPAR;
-    tios.c_oflag = 0;
-    tios.c_lflag = 0;
-    tios.c_cc[VMIN] = 1;
-    tios.c_cc[VTIME] = 0;
-
-    if (crtscts == -2) {
-	tios.c_iflag |= IXON | IXOFF;
-	tios.c_cc[VSTOP] = 0x13;	/* DC3 = XOFF = ^S */
-	tios.c_cc[VSTART] = 0x11;	/* DC1 = XON  = ^Q */
-    }
-
-    speed = translate_speed(inspeed);
-    if (speed) {
-	cfsetospeed(&tios, speed);
-	cfsetispeed(&tios, speed);
-    } else {
-	speed = cfgetospeed(&tios);
-	/*
-	 * We can't proceed if the serial port speed is 0,
-	 * since that implies that the serial port is disabled.
-	 */
-	if (speed == B0)
-	    fatal("Baud rate for %s is 0; need explicit baud rate", devnam);
-    }
-
-    if (tcsetattr(fd, TCSAFLUSH, &tios) < 0)
-	fatal("tcsetattr: %m");
-
-    baud_rate = inspeed = baud_rate_of(speed);
-    restore_term = 1;
-}
-
-/*
- * restore_tty - restore the terminal to the saved settings.
- */
-void
-restore_tty(fd)
-    int fd;
-{
-    if (restore_term) {
-	if (!default_device) {
-	    /*
-	     * Turn off echoing, because otherwise we can get into
-	     * a loop with the tty and the modem echoing to each other.
-	     * We presume we are the sole user of this tty device, so
-	     * when we close it, it will revert to its defaults anyway.
-	     */
-	    inittermios.c_lflag &= ~(ECHO | ECHONL);
-	}
-	if (tcsetattr(fd, TCSAFLUSH, &inittermios) < 0)
-	    if (!hungup && errno != ENXIO)
-		warn("tcsetattr: %m");
-	ioctl(fd, TIOCSWINSZ, &wsinfo);
-	restore_term = 0;
-    }
-}
-
-/*
- * setdtr - control the DTR line on the serial port.
- * This is called from die(), so it shouldn't call die().
- */
-void
-setdtr(fd, on)
-int fd, on;
-{
-    int modembits = TIOCM_DTR;
-
-    ioctl(fd, (on? TIOCMBIS: TIOCMBIC), &modembits);
-}
-
-/*
- * open_loopback - open the device we use for getting packets
- * in demand mode.  Under SunOS, we use our existing fd
- * to the ppp driver.
- */
-int
-open_ppp_loopback()
-{
-    return pppfd;
-}
-
-/*
- * output - Output PPP packet.
- */
-void
-output(unit, p, len)
-    int unit;
-    u_char *p;
-    int len;
-{
-    struct strbuf data;
-    int retries;
-    struct pollfd pfd;
-
-    if (debug)
-	dbglog("sent %P", p, len);
-
-    data.len = len;
-    data.buf = (caddr_t) p;
-    retries = 4;
-    while (putmsg(pppfd, NULL, &data, 0) < 0) {
-	if (--retries < 0 || (errno != EWOULDBLOCK && errno != EAGAIN)) {
-	    if (errno != ENXIO)
-		error("Couldn't send packet: %m");
-	    break;
-	}
-	pfd.fd = pppfd;
-	pfd.events = POLLOUT;
-	poll(&pfd, 1, 250);	/* wait for up to 0.25 seconds */
-    }
-}
-
-
-/*
- * wait_input - wait until there is data available,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_input(timo)
-    struct timeval *timo;
-{
-    int t;
-
-    t = timo == NULL? -1: timo->tv_sec * 1000 + timo->tv_usec / 1000;
-    if (poll(pollfds, n_pollfds, t) < 0 && errno != EINTR) {
-	if (errno != EAGAIN)
-	    fatal("poll: %m");
-	/* we can get EAGAIN on a heavily loaded system,
-	 * just wait a short time and try again. */
-	usleep(50000);
-    }
-}
-
-/*
- * add_fd - add an fd to the set that wait_input waits for.
- */
-void add_fd(fd)
-    int fd;
-{
-    int n;
-
-    for (n = 0; n < n_pollfds; ++n)
-	if (pollfds[n].fd == fd)
-	    return;
-    if (n_pollfds < MAX_POLLFDS) {
-	pollfds[n_pollfds].fd = fd;
-	pollfds[n_pollfds].events = POLLIN | POLLPRI | POLLHUP;
-	++n_pollfds;
-    } else
-	error("Too many inputs!");
-}
-
-/*
- * remove_fd - remove an fd from the set that wait_input waits for.
- */
-void remove_fd(fd)
-    int fd;
-{
-    int n;
-
-    for (n = 0; n < n_pollfds; ++n) {
-	if (pollfds[n].fd == fd) {
-	    while (++n < n_pollfds)
-		pollfds[n-1] = pollfds[n];
-	    --n_pollfds;
-	    break;
-	}
-    }
-}
-
-#if 0
-/*
- * wait_loop_output - wait until there is data available on the
- * loopback, for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-void
-wait_loop_output(timo)
-    struct timeval *timo;
-{
-    wait_input(timo);
-}
-
-/*
- * wait_time - wait for a given length of time or until a
- * signal is received.
- */
-void
-wait_time(timo)
-    struct timeval *timo;
-{
-    int n;
-
-    n = select(0, NULL, NULL, NULL, timo);
-    if (n < 0 && errno != EINTR)
-	fatal("select: %m");
-}
-#endif
-
-/*
- * read_packet - get a PPP packet from the serial device.
- */
-int
-read_packet(buf)
-    u_char *buf;
-{
-    struct strbuf ctrl, data;
-    int flags, len;
-    unsigned char ctrlbuf[64];
-
-    for (;;) {
-	data.maxlen = PPP_MRU + PPP_HDRLEN;
-	data.buf = (caddr_t) buf;
-	ctrl.maxlen = sizeof(ctrlbuf);
-	ctrl.buf = (caddr_t) ctrlbuf;
-	flags = 0;
-	len = getmsg(pppfd, &ctrl, &data, &flags);
-	if (len < 0) {
-	    if (errno == EAGAIN || errno == EINTR)
-		return -1;
-	    fatal("Error reading packet: %m");
-	}
-
-	if (ctrl.len <= 0)
-	    return data.len;
-
-	/*
-	 * Got a M_PROTO or M_PCPROTO message.  Huh?
-	 */
-	if (debug)
-	    dbglog("got ctrl msg len=%d", ctrl.len);
-
-    }
-}
-
-/*
- * get_loop_output - get outgoing packets from the ppp device,
- * and detect when we want to bring the real link up.
- * Return value is 1 if we need to bring up the link, 0 otherwise.
- */
-int
-get_loop_output()
-{
-    int len;
-    int rv = 0;
-
-    while ((len = read_packet(inpacket_buf)) > 0) {
-	if (loop_frame(inpacket_buf, len))
-	    rv = 1;
-    }
-    return rv;
-}
-
-/*
- * ppp_send_config - configure the transmit characteristics of
- * the ppp interface.
- */
-void
-ppp_send_config(unit, mtu, asyncmap, pcomp, accomp)
-    int unit, mtu;
-    u_int32_t asyncmap;
-    int pcomp, accomp;
-{
-    int cf[2];
-    struct ifreq ifr;
-
-    link_mtu = mtu;
-    if (strioctl(pppfd, PPPIO_MTU, &mtu, sizeof(mtu), 0) < 0) {
-	if (hungup && errno == ENXIO)
-	    return;
-	error("Couldn't set MTU: %m");
-    }
-    if (strioctl(pppfd, PPPIO_XACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-	error("Couldn't set transmit ACCM: %m");
-    }
-    cf[0] = (pcomp? COMP_PROT: 0) + (accomp? COMP_AC: 0);
-    cf[1] = COMP_PROT | COMP_AC;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	error("Couldn't set prot/AC compression: %m");
-    }
-
-    /* set mtu for ip as well */
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_metric = link_mtu;
-    if (ioctl(sockfd, SIOCSIFMTU, &ifr) < 0) {
-	error("Couldn't set IP MTU: %m");
-    }
-}
-
-/*
- * ppp_set_xaccm - set the extended transmit ACCM for the interface.
- */
-void
-ppp_set_xaccm(unit, accm)
-    int unit;
-    ext_accm accm;
-{
-    if (strioctl(pppfd, PPPIO_XACCM, accm, sizeof(ext_accm), 0) < 0) {
-	if (!hungup || errno != ENXIO)
-	    warn("Couldn't set extended ACCM: %m");
-    }
-}
-
-/*
- * ppp_recv_config - configure the receive-side characteristics of
- * the ppp interface.
- */
-void
-ppp_recv_config(unit, mru, asyncmap, pcomp, accomp)
-    int unit, mru;
-    u_int32_t asyncmap;
-    int pcomp, accomp;
-{
-    int cf[2];
-
-    link_mru = mru;
-    if (strioctl(pppfd, PPPIO_MRU, &mru, sizeof(mru), 0) < 0) {
-	if (hungup && errno == ENXIO)
-	    return;
-	error("Couldn't set MRU: %m");
-    }
-    if (strioctl(pppfd, PPPIO_RACCM, &asyncmap, sizeof(asyncmap), 0) < 0) {
-	error("Couldn't set receive ACCM: %m");
-    }
-    cf[0] = (pcomp? DECOMP_PROT: 0) + (accomp? DECOMP_AC: 0);
-    cf[1] = DECOMP_PROT | DECOMP_AC;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	error("Couldn't set prot/AC decompression: %m");
-    }
-}
-
-/*
- * ccp_test - ask kernel whether a given compression method
- * is acceptable for use.
- */
-int
-ccp_test(unit, opt_ptr, opt_len, for_transmit)
-    int unit, opt_len, for_transmit;
-    u_char *opt_ptr;
-{
-    if (strioctl(pppfd, (for_transmit? PPPIO_XCOMP: PPPIO_RCOMP),
-		 opt_ptr, opt_len, 0) >= 0)
-	return 1;
-    return (errno == ENOSR)? 0: -1;
-}
-
-/*
- * ccp_flags_set - inform kernel about the current state of CCP.
- */
-void
-ccp_flags_set(unit, isopen, isup)
-    int unit, isopen, isup;
-{
-    int cf[2];
-
-    cf[0] = (isopen? CCP_ISOPEN: 0) + (isup? CCP_ISUP: 0);
-    cf[1] = CCP_ISOPEN | CCP_ISUP | CCP_ERROR | CCP_FATALERROR;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (!hungup || errno != ENXIO)
-	    error("Couldn't set kernel CCP state: %m");
-    }
-}
-
-/*
- * get_idle_time - return how long the link has been idle.
- */
-int
-get_idle_time(u, ip)
-    int u;
-    struct ppp_idle *ip;
-{
-    return strioctl(pppfd, PPPIO_GIDLE, ip, 0, sizeof(struct ppp_idle)) >= 0;
-}
-
-/*
- * get_ppp_stats - return statistics for the link.
- */
-int
-get_ppp_stats(u, stats)
-    int u;
-    struct pppd_stats *stats;
-{
-    struct ppp_stats s;
-
-    if (strioctl(pppfd, PPPIO_GETSTAT, &s, 0, sizeof(s)) < 0) {
-	error("Couldn't get link statistics: %m");
-	return 0;
-    }
-    stats->bytes_in = s.p.ppp_ibytes;
-    stats->bytes_out = s.p.ppp_obytes;
-    return 1;
-}
-
-
-/*
- * ccp_fatal_error - returns 1 if decompression was disabled as a
- * result of an error detected after decompression of a packet,
- * 0 otherwise.  This is necessary because of patent nonsense.
- */
-int
-ccp_fatal_error(unit)
-    int unit;
-{
-    int cf[2];
-
-    cf[0] = cf[1] = 0;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (errno != ENXIO && errno != EINVAL)
-	    error("Couldn't get compression flags: %m");
-	return 0;
-    }
-    return cf[0] & CCP_FATALERROR;
-}
-
-/*
- * sifvjcomp - config tcp header compression
- */
-int
-sifvjcomp(u, vjcomp, xcidcomp, xmaxcid)
-    int u, vjcomp, xcidcomp, xmaxcid;
-{
-    int cf[2];
-    char maxcid[2];
-
-    if (vjcomp) {
-	maxcid[0] = xcidcomp;
-	maxcid[1] = 15;		/* XXX should be rmaxcid */
-	if (strioctl(pppfd, PPPIO_VJINIT, maxcid, sizeof(maxcid), 0) < 0) {
-	    error("Couldn't initialize VJ compression: %m");
-	}
-    }
-
-    cf[0] = (vjcomp? COMP_VJC + DECOMP_VJC: 0)	/* XXX this is wrong */
-	+ (xcidcomp? COMP_VJCCID + DECOMP_VJCCID: 0);
-    cf[1] = COMP_VJC + DECOMP_VJC + COMP_VJCCID + DECOMP_VJCCID;
-    if (strioctl(pppfd, PPPIO_CFLAGS, cf, sizeof(cf), sizeof(int)) < 0) {
-	if (vjcomp)
-	    error("Couldn't enable VJ compression: %m");
-    }
-
-    return 1;
-}
-
-/*
- * sifup - Config the interface up and enable IP packets to pass.
- */
-int
-sifup(u)
-    int u;
-{
-    struct ifreq ifr;
-
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sockfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface up (get): %m");
-	return 0;
-    }
-    ifr.ifr_flags |= IFF_UP;
-    if (ioctl(sockfd, SIOCSIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface up (set): %m");
-	return 0;
-    }
-    if_is_up = 1;
-    return 1;
-}
-
-/*
- * sifdown - Config the interface down and disable IP.
- */
-int
-sifdown(u)
-    int u;
-{
-    struct ifreq ifr;
-
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sockfd, SIOCGIFFLAGS, &ifr) < 0) {
-	error("Couldn't mark interface down (get): %m");
-	return 0;
-    }
-    if ((ifr.ifr_flags & IFF_UP) != 0) {
-	ifr.ifr_flags &= ~IFF_UP;
-	if (ioctl(sockfd, SIOCSIFFLAGS, &ifr) < 0) {
-	    error("Couldn't mark interface down (set): %m");
-	    return 0;
-	}
-    }
-    if_is_up = 0;
-    return 1;
-}
-
-/*
- * sifnpmode - Set the mode for handling packets for a given NP.
- */
-int
-sifnpmode(u, proto, mode)
-    int u;
-    int proto;
-    enum NPmode mode;
-{
-    int npi[2];
-
-    npi[0] = proto;
-    npi[1] = (int) mode;
-    if (strioctl(pppfd, PPPIO_NPMODE, npi, 2 * sizeof(int), 0) < 0) {
-	error("ioctl(set NP %d mode to %d): %m", proto, mode);
-	return 0;
-    }
-    return 1;
-}
-
-#define INET_ADDR(x)	(((struct sockaddr_in *) &(x))->sin_addr.s_addr)
-
-/*
- * sifaddr - Config the interface IP addresses and netmask.
- */
-int
-sifaddr(u, o, h, m)
-    int u;
-    u_int32_t o, h, m;
-{
-    struct ifreq ifr;
-
-    memset(&ifr, 0, sizeof(ifr));
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_addr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_addr) = m;
-    if (ioctl(sockfd, SIOCSIFNETMASK, &ifr) < 0) {
-	error("Couldn't set IP netmask: %m");
-    }
-    ifr.ifr_addr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_addr) = o;
-    if (ioctl(sockfd, SIOCSIFADDR, &ifr) < 0) {
-	error("Couldn't set local IP address: %m");
-    }
-    ifr.ifr_dstaddr.sa_family = AF_INET;
-    INET_ADDR(ifr.ifr_dstaddr) = h;
-    if (ioctl(sockfd, SIOCSIFDSTADDR, &ifr) < 0) {
-	error("Couldn't set remote IP address: %m");
-    }
-#if 0	/* now done in ppp_send_config */
-    ifr.ifr_metric = link_mtu;
-    if (ioctl(sockfd, SIOCSIFMTU, &ifr) < 0) {
-	error("Couldn't set IP MTU: %m");
-    }
-#endif
-    ifaddrs[0] = o;
-    ifaddrs[1] = h;
-
-    return 1;
-}
-
-/*
- * cifaddr - Clear the interface IP addresses, and delete routes
- * through the interface if possible.
- */
-int
-cifaddr(u, o, h)
-    int u;
-    u_int32_t o, h;
-{
-    struct rtentry rt;
-
-    bzero(&rt, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = h;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = o;
-    rt.rt_flags = RTF_HOST;
-    if (ioctl(sockfd, SIOCDELRT, &rt) < 0)
-	error("Couldn't delete route through interface: %m");
-    ifaddrs[0] = 0;
-    return 1;
-}
-
-/*
- * sifdefaultroute - assign a default route through the address given.
- */
-int
-sifdefaultroute(u, l, g)
-    int u;
-    u_int32_t l, g;
-{
-    struct rtentry rt;
-
-    bzero(&rt, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = 0;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = g;
-    rt.rt_flags = RTF_GATEWAY;
-
-    if (ioctl(sockfd, SIOCADDRT, &rt) < 0) {
-	error("Can't add default route: %m");
-	return 0;
-    }
-
-    default_route_gateway = g;
-    return 1;
-}
-
-/*
- * cifdefaultroute - delete a default route through the address given.
- */
-int
-cifdefaultroute(u, l, g)
-    int u;
-    u_int32_t l, g;
-{
-    struct rtentry rt;
-
-    bzero(&rt, sizeof(rt));
-    rt.rt_dst.sa_family = AF_INET;
-    INET_ADDR(rt.rt_dst) = 0;
-    rt.rt_gateway.sa_family = AF_INET;
-    INET_ADDR(rt.rt_gateway) = g;
-    rt.rt_flags = RTF_GATEWAY;
-
-    if (ioctl(sockfd, SIOCDELRT, &rt) < 0) {
-	error("Can't delete default route: %m");
-	return 0;
-    }
-
-    default_route_gateway = 0;
-    return 1;
-}
-
-/*
- * sifproxyarp - Make a proxy ARP entry for the peer.
- */
-int
-sifproxyarp(unit, hisaddr)
-    int unit;
-    u_int32_t hisaddr;
-{
-    struct arpreq arpreq;
-
-    bzero(&arpreq, sizeof(arpreq));
-    if (!get_ether_addr(hisaddr, &arpreq.arp_ha))
-	return 0;
-
-    arpreq.arp_pa.sa_family = AF_INET;
-    INET_ADDR(arpreq.arp_pa) = hisaddr;
-    arpreq.arp_flags = ATF_PERM | ATF_PUBL;
-    if (ioctl(sockfd, SIOCSARP, (caddr_t) &arpreq) < 0) {
-	error("Couldn't set proxy ARP entry: %m");
-	return 0;
-    }
-
-    proxy_arp_addr = hisaddr;
-    return 1;
-}
-
-/*
- * cifproxyarp - Delete the proxy ARP entry for the peer.
- */
-int
-cifproxyarp(unit, hisaddr)
-    int unit;
-    u_int32_t hisaddr;
-{
-    struct arpreq arpreq;
-
-    bzero(&arpreq, sizeof(arpreq));
-    arpreq.arp_pa.sa_family = AF_INET;
-    INET_ADDR(arpreq.arp_pa) = hisaddr;
-    if (ioctl(sockfd, SIOCDARP, (caddr_t)&arpreq) < 0) {
-	error("Couldn't delete proxy ARP entry: %m");
-	return 0;
-    }
-
-    proxy_arp_addr = 0;
-    return 1;
-}
-
-/*
- * get_ether_addr - get the hardware address of an interface on the
- * the same subnet as ipaddr.
- */
-#define MAX_IFS		32
-
-static int
-get_ether_addr(ipaddr, hwaddr)
-    u_int32_t ipaddr;
-    struct sockaddr *hwaddr;
-{
-    struct ifreq *ifr, *ifend;
-    u_int32_t ina, mask;
-    struct ifreq ifreq;
-    struct ifconf ifc;
-    struct ifreq ifs[MAX_IFS];
-    int nit_fd;
-
-    ifc.ifc_len = sizeof(ifs);
-    ifc.ifc_req = ifs;
-    if (ioctl(sockfd, SIOCGIFCONF, &ifc) < 0) {
-	error("ioctl(SIOCGIFCONF): %m");
-	return 0;
-    }
-
-    /*
-     * Scan through looking for an interface with an Internet
-     * address on the same subnet as `ipaddr'.
-     */
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ifr = (struct ifreq *)
-	    ((char *)&ifr->ifr_addr + sizeof(struct sockaddr))) {
-        if (ifr->ifr_addr.sa_family == AF_INET) {
-
-            /*
-             * Check that the interface is up, and not point-to-point
-             * or loopback.
-             */
-            strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-            if (ioctl(sockfd, SIOCGIFFLAGS, &ifreq) < 0)
-                continue;
-            if ((ifreq.ifr_flags &
-                 (IFF_UP|IFF_BROADCAST|IFF_POINTOPOINT|IFF_LOOPBACK|IFF_NOARP))
-                 != (IFF_UP|IFF_BROADCAST))
-                continue;
-
-            /*
-             * Get its netmask and check that it's on the right subnet.
-             */
-            if (ioctl(sockfd, SIOCGIFNETMASK, &ifreq) < 0)
-                continue;
-            ina = ((struct sockaddr_in *) &ifr->ifr_addr)->sin_addr.s_addr;
-            mask = ((struct sockaddr_in *) &ifreq.ifr_addr)->sin_addr.s_addr;
-            if ((ipaddr & mask) != (ina & mask))
-                continue;
-
-            break;
-        }
-    }
-
-    if (ifr >= ifend)
-	return 0;
-    info("found interface %s for proxy arp", ifr->ifr_name);
-
-    /*
-     * Grab the physical address for this interface.
-     */
-    if ((nit_fd = open("/dev/nit", O_RDONLY)) < 0) {
-	error("Couldn't open /dev/nit: %m");
-	return 0;
-    }
-    strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-    if (ioctl(nit_fd, NIOCBIND, &ifreq) < 0
-	|| ioctl(nit_fd, SIOCGIFADDR, &ifreq) < 0) {
-	error("Couldn't get hardware address for %s: %m",
-	       ifreq.ifr_name);
-	close(nit_fd);
-	return 0;
-    }
-
-    hwaddr->sa_family = AF_UNSPEC;
-    memcpy(hwaddr->sa_data, ifreq.ifr_addr.sa_data, 6);
-    close(nit_fd);
-    return 1;
-}
-
-/*
- * have_route_to - determine if the system has any route to
- * a given IP address.
- * For demand mode to work properly, we have to ignore routes
- * through our own interface.
- */
-int have_route_to(addr)
-    u_int32_t addr;
-{
-    return -1;
-}
-
-#define	WTMPFILE	"/usr/adm/wtmp"
-
-void
-logwtmp(line, name, host)
-    const char *line, *name, *host;
-{
-    int fd;
-    struct stat buf;
-    struct utmp ut;
-
-    if ((fd = open(WTMPFILE, O_WRONLY|O_APPEND, 0)) < 0)
-	return;
-    if (!fstat(fd, &buf)) {
-	strncpy(ut.ut_line, line, sizeof(ut.ut_line));
-	strncpy(ut.ut_name, name, sizeof(ut.ut_name));
-	strncpy(ut.ut_host, host, sizeof(ut.ut_host));
-	(void)time(&ut.ut_time);
-	if (write(fd, (char *)&ut, sizeof(struct utmp)) != sizeof(struct utmp))
-	    (void)ftruncate(fd, buf.st_size);
-    }
-    close(fd);
-}
-
-/*
- * Return user specified netmask, modified by any mask we might determine
- * for address `addr' (in network byte order).
- * Here we scan through the system's list of interfaces, looking for
- * any non-point-to-point interfaces which might appear to be on the same
- * network as `addr'.  If we find any, we OR in their netmask to the
- * user-specified netmask.
- */
-u_int32_t
-GetMask(addr)
-    u_int32_t addr;
-{
-    u_int32_t mask, nmask, ina;
-    struct ifreq *ifr, *ifend, ifreq;
-    struct ifconf ifc;
-
-    addr = ntohl(addr);
-    if (IN_CLASSA(addr))	/* determine network mask for address class */
-	nmask = IN_CLASSA_NET;
-    else if (IN_CLASSB(addr))
-	nmask = IN_CLASSB_NET;
-    else
-	nmask = IN_CLASSC_NET;
-    /* class D nets are disallowed by bad_ip_adrs */
-    mask = netmask | htonl(nmask);
-
-    /*
-     * Scan through the system's network interfaces.
-     */
-    ifc.ifc_len = MAX_IFS * sizeof(struct ifreq);
-    ifc.ifc_req = alloca(ifc.ifc_len);
-    if (ifc.ifc_req == 0)
-	return mask;
-    if (ioctl(sockfd, SIOCGIFCONF, &ifc) < 0) {
-	warn("Couldn't get system interface list: %m");
-	return mask;
-    }
-    ifend = (struct ifreq *) (ifc.ifc_buf + ifc.ifc_len);
-    for (ifr = ifc.ifc_req; ifr < ifend; ++ifr) {
-	/*
-	 * Check the interface's internet address.
-	 */
-	if (ifr->ifr_addr.sa_family != AF_INET)
-	    continue;
-	ina = INET_ADDR(ifr->ifr_addr);
-	if ((ntohl(ina) & nmask) != (addr & nmask))
-	    continue;
-	/*
-	 * Check that the interface is up, and not point-to-point or loopback.
-	 */
-	strlcpy(ifreq.ifr_name, ifr->ifr_name, sizeof(ifreq.ifr_name));
-	if (ioctl(sockfd, SIOCGIFFLAGS, &ifreq) < 0)
-	    continue;
-	if ((ifreq.ifr_flags & (IFF_UP|IFF_POINTOPOINT|IFF_LOOPBACK))
-	    != IFF_UP)
-	    continue;
-	/*
-	 * Get its netmask and OR it into our mask.
-	 */
-	if (ioctl(sockfd, SIOCGIFNETMASK, &ifreq) < 0)
-	    continue;
-	mask |= INET_ADDR(ifreq.ifr_addr);
-    }
-
-    return mask;
-}
-
-static int
-strioctl(fd, cmd, ptr, ilen, olen)
-    int fd, cmd, ilen, olen;
-    void *ptr;
-{
-    struct strioctl str;
-
-    str.ic_cmd = cmd;
-    str.ic_timout = 0;
-    str.ic_len = ilen;
-    str.ic_dp = ptr;
-    if (ioctl(fd, I_STR, &str) == -1)
-	return -1;
-    if (str.ic_len != olen)
-	dbglog("strioctl: expected %d bytes, got %d for cmd %x\n",
-	       olen, str.ic_len, cmd);
-    return 0;
-}
-
-/*
- * Use the hostid as part of the random number seed.
- */
-int
-get_host_seed()
-{
-    return gethostid();
-}
-
-#if 0
-/*
- * Code for locking/unlocking the serial device.
- * This code is derived from chat.c.
- */
-
-#if !defined(HDB) && !defined(SUNOS3)
-#define	HDB	1		/* ascii lock files are the default */
-#endif
-
-#ifndef LOCK_DIR
-# if HDB
-#  define	PIDSTRING
-#  define	LOCK_PREFIX	"/usr/spool/locks/LCK.."
-# else /* HDB */
-#  define	LOCK_PREFIX	"/usr/spool/uucp/LCK.."
-# endif /* HDB */
-#endif /* LOCK_DIR */
-
-static char *lock_file;		/* name of lock file created */
-
-/*
- * lock - create a lock file for the named device.
- */
-int
-lock(dev)
-    char *dev;
-{
-    char hdb_lock_buffer[12];
-    int fd, pid, n;
-    char *p;
-    size_t l;
-
-    if ((p = strrchr(dev, '/')) != NULL)
-	dev = p + 1;
-    l = strlen(LOCK_PREFIX) + strlen(dev) + 1;
-    lock_file = malloc(l);
-    if (lock_file == NULL)
-	novm("lock file name");
-    slprintf(lock_file, l, "%s%s", LOCK_PREFIX, dev);
-
-    while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
-	if (errno == EEXIST
-	    && (fd = open(lock_file, O_RDONLY, 0)) >= 0) {
-	    /* Read the lock file to find out who has the device locked */
-#ifdef PIDSTRING
-	    n = read(fd, hdb_lock_buffer, 11);
-	    if (n > 0) {
-		hdb_lock_buffer[n] = 0;
-		pid = atoi(hdb_lock_buffer);
-	    }
-#else
-	    n = read(fd, &pid, sizeof(pid));
-#endif
-	    if (n <= 0) {
-		error("Can't read pid from lock file %s", lock_file);
-		close(fd);
-	    } else {
-		if (kill(pid, 0) == -1 && errno == ESRCH) {
-		    /* pid no longer exists - remove the lock file */
-		    if (unlink(lock_file) == 0) {
-			close(fd);
-			notice("Removed stale lock on %s (pid %d)",
-			       dev, pid);
-			continue;
-		    } else
-			warn("Couldn't remove stale lock on %s",
-			       dev);
-		} else
-		    notice("Device %s is locked by pid %d",
-			   dev, pid);
-	    }
-	    close(fd);
-	} else
-	    error("Can't create lock file %s: %m", lock_file);
-	free(lock_file);
-	lock_file = NULL;
-	return -1;
-    }
-
-#ifdef PIDSTRING
-    slprintf(hdb_lock_buffer, sizeof(hdb_lock_buffer), "%10d\n", getpid());
-    write(fd, hdb_lock_buffer, 11);
-#else
-    pid = getpid();
-    write(fd, &pid, sizeof pid);
-#endif
-
-    close(fd);
-    return 0;
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
-    if (lock_file) {
-	unlink(lock_file);
-	free(lock_file);
-	lock_file = NULL;
-    }
-}
-#endif /* lock stuff removed */
-
-/*
- * get_pty - get a pty master/slave pair and chown the slave side
- * to the uid given.  Assumes slave_name points to >= 12 bytes of space.
- */
-int
-get_pty(master_fdp, slave_fdp, slave_name, uid)
-    int *master_fdp;
-    int *slave_fdp;
-    char *slave_name;
-    int uid;
-{
-    int i, mfd, sfd;
-    char pty_name[12];
-    struct termios tios;
-
-    sfd = -1;
-    for (i = 0; i < 64; ++i) {
-	slprintf(pty_name, sizeof(pty_name), "/dev/pty%c%x",
-		 'p' + i / 16, i % 16);
-	mfd = open(pty_name, O_RDWR, 0);
-	if (mfd >= 0) {
-	    pty_name[5] = 't';
-	    sfd = open(pty_name, O_RDWR | O_NOCTTY, 0);
-	    if (sfd >= 0)
-		break;
-	    close(mfd);
-	}
-    }
-    if (sfd < 0)
-	return 0;
-
-    strlcpy(slave_name, pty_name, 12);
-    *master_fdp = mfd;
-    *slave_fdp = sfd;
-    fchown(sfd, uid, -1);
-    fchmod(sfd, S_IRUSR | S_IWUSR);
-    if (tcgetattr(sfd, &tios) == 0) {
-	tios.c_cflag &= ~(CSIZE | CSTOPB | PARENB);
-	tios.c_cflag |= CS8 | CREAD;
-	tios.c_iflag  = IGNPAR | CLOCAL;
-	tios.c_oflag  = 0;
-	tios.c_lflag  = 0;
-	if (tcsetattr(sfd, TCSAFLUSH, &tios) < 0)
-	    warn("couldn't set attributes on pty: %m");
-    } else
-	warn("couldn't get attributes on pty: %m");
-
-    return 1;
-}
-
-/*
- * SunOS doesn't have strtoul :-(
- */
-unsigned long
-strtoul(str, ptr, base)
-    char *str, **ptr;
-    int base;
-{
-    return (unsigned long) strtol(str, ptr, base);
-}
-
-/*
- * Or strerror :-(
- */
-extern char *sys_errlist[];
-extern int sys_nerr;
-
-char *
-strerror(n)
-    int n;
-{
-    static char unknown[32];
-
-    if (n > 0 && n < sys_nerr)
-	return sys_errlist[n];
-    slprintf(unknown, sizeof(unknown), "Error %d", n);
-    return unknown;
-}
diff --git a/mdk-stage1/ppp/pppd/tdb.c b/mdk-stage1/ppp/pppd/tdb.c
deleted file mode 100644
index 7fd58291e..000000000
--- a/mdk-stage1/ppp/pppd/tdb.c
+++ /dev/null
@@ -1,1282 +0,0 @@
-/* 
- * Database functions
- * Copyright (C) Andrew Tridgell 1999
- * 
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms AND provided that this software or
- * any derived work is only used as part of the PPP daemon (pppd)
- * and related utilities.
- * The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Note: this software is also available under the Gnu Public License
- * version 2 or later.
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include "tdb.h"
-
-#define TDB_VERSION (0x26011967 + 1)
-#define TDB_MAGIC (0x26011999U)
-#define TDB_FREE_MAGIC (~TDB_MAGIC)
-#define TDB_ALIGN 4
-#define MIN_REC_SIZE (2*sizeof(struct list_struct) + TDB_ALIGN)
-#define DEFAULT_HASH_SIZE 128
-#define TDB_PAGE_SIZE 0x2000
-#define TDB_LEN_MULTIPLIER 10
-#define FREELIST_TOP (sizeof(struct tdb_header))
-
-#define LOCK_SET 1
-#define LOCK_CLEAR 0
-
-/* lock offsets */
-#define GLOBAL_LOCK 0
-#define ACTIVE_LOCK 4
-#define LIST_LOCK_BASE 1024
-
-#define BUCKET(hash) ((hash) % tdb->header.hash_size)
-
-#ifndef MAP_FILE
-#define MAP_FILE 0
-#endif
-
-/* the body of the database is made of one list_struct for the free space
-   plus a separate data list for each hash value */
-struct list_struct {
-	tdb_len rec_len; /* total byte length of record */
-	tdb_off next; /* offset of the next record in the list */
-	tdb_len key_len; /* byte length of key */
-	tdb_len data_len; /* byte length of data */
-	unsigned full_hash; /* the full 32 bit hash of the key */
-	unsigned magic;   /* try to catch errors */
-	/*
-	   the following union is implied 
-	   union {
-              char record[rec_len];
-	      struct {
-	        char key[key_len];
-		char data[data_len];
-	      }
-           }
-	*/
-};
-
-/* a null data record - useful for error returns */
-static TDB_DATA null_data;
-
-/* a byte range locking function - return 0 on success
-   this functions locks/unlocks 1 byte at the specified offset */
-static int tdb_brlock(TDB_CONTEXT *tdb, tdb_off offset, 
-		      int set, int rw_type, int lck_type)
-{
-#if NOLOCK
-	return 0;
-#else
-	struct flock fl;
-
-        if (tdb->fd == -1) return 0;   /* for in memory tdb */
-
-	if (tdb->read_only) return -1;
-
-	fl.l_type = set==LOCK_SET?rw_type:F_UNLCK;
-	fl.l_whence = SEEK_SET;
-	fl.l_start = offset;
-	fl.l_len = 1;
-	fl.l_pid = 0;
-
-	if (fcntl(tdb->fd, lck_type, &fl) != 0) {
-#if TDB_DEBUG
-		if (lck_type == F_SETLKW) {
-			printf("lock %d failed at %d (%s)\n", 
-			       set, offset, strerror(errno));
-		}
-#endif
-		tdb->ecode = TDB_ERR_LOCK;
-		return -1;
-	}
-	return 0;
-#endif
-}
-
-/* lock a list in the database. list -1 is the alloc list */
-static int tdb_lock(TDB_CONTEXT *tdb, int list)
-{
-	if (list < -1 || list >= (int)tdb->header.hash_size) {
-#if TDB_DEBUG
-		printf("bad list %d\n", list);
-#endif
-		return -1;
-	}
-	if (tdb->locked[list+1] == 0) {
-		if (tdb_brlock(tdb, LIST_LOCK_BASE + 4*list, LOCK_SET, 
-			       F_WRLCK, F_SETLKW) != 0) {
-			return -1;
-		}
-	}
-	tdb->locked[list+1]++;
-	return 0;
-}
-
-/* unlock the database. */
-static int tdb_unlock(TDB_CONTEXT *tdb, int list)
-{
-	if (list < -1 || list >= (int)tdb->header.hash_size) {
-#if TDB_DEBUG
-		printf("bad unlock list %d\n", list);
-#endif
-		return -1;
-	}
-
-	if (tdb->locked[list+1] == 0) {
-#if TDB_DEBUG
-		printf("not locked %d\n", list);
-#endif
-		tdb->ecode = TDB_ERR_LOCK;
-		return -1;
-	}
-	if (tdb->locked[list+1] == 1) {
-		if (tdb_brlock(tdb, LIST_LOCK_BASE + 4*list, LOCK_CLEAR, 
-			       F_WRLCK, F_SETLKW) != 0) {
-			return -1;
-		}
-	}
-	tdb->locked[list+1]--;
-	return 0;
-}
-
-/* the hash algorithm - turn a key into an integer
-   This is based on the hash agorithm from gdbm */
-static unsigned tdb_hash(TDB_DATA *key)
-{
-	unsigned value;	/* Used to compute the hash value.  */
-	unsigned   i;	/* Used to cycle through random values. */
-
-	/* Set the initial value from the key size. */
-	value = 0x238F13AF * key->dsize;
-	for (i=0; i < key->dsize; i++) {
-		value = (value + (key->dptr[i] << (i*5 % 24)));
-	}
-
-	value = (1103515243 * value + 12345);  
-
-	return value;
-}
-
-/* find the top of the hash chain for an open database */
-static tdb_off tdb_hash_top(TDB_CONTEXT *tdb, unsigned hash)
-{
-	tdb_off ret;
-	hash = BUCKET(hash);
-	ret = FREELIST_TOP + (hash+1)*sizeof(tdb_off);
-	return ret;
-}
-
-
-/* check for an out of bounds access - if it is out of bounds then
-   see if the database has been expanded by someone else and expand
-   if necessary */
-static int tdb_oob(TDB_CONTEXT *tdb, tdb_off offset)
-{
-	struct stat st;
-	if ((offset <= tdb->map_size) || (tdb->fd == -1)) return 0;
-
-	fstat(tdb->fd, &st);
-	if (st.st_size <= (ssize_t)offset) {
-		tdb->ecode = TDB_ERR_IO;
-		return -1;
-	}
-
-#if HAVE_MMAP
-	if (tdb->map_ptr) {
-		munmap(tdb->map_ptr, tdb->map_size);
-		tdb->map_ptr = NULL;
-	}
-#endif
-
-	tdb->map_size = st.st_size;
-#if HAVE_MMAP
-	tdb->map_ptr = (void *)mmap(NULL, tdb->map_size, 
-				    tdb->read_only?PROT_READ:PROT_READ|PROT_WRITE,
-				    MAP_SHARED | MAP_FILE, tdb->fd, 0);
-#endif	
-	return 0;
-}
-
-
-/* write a lump of data at a specified offset */
-static int tdb_write(TDB_CONTEXT *tdb, tdb_off offset, const char *buf, tdb_len len)
-{
-	if (tdb_oob(tdb, offset + len) != 0) {
-		/* oops - trying to write beyond the end of the database! */
-		return -1;
-	}
-
-	if (tdb->map_ptr) {
-		memcpy(offset + (char *)tdb->map_ptr, buf, len);
-	} else {
-		if (lseek(tdb->fd, offset, SEEK_SET) != offset ||
-		    write(tdb->fd, buf, len) != (ssize_t)len) {
-			tdb->ecode = TDB_ERR_IO;
-			return -1;
-		}
-	}
-	return 0;
-}
-
-/* read a lump of data at a specified offset */
-static int tdb_read(TDB_CONTEXT *tdb, tdb_off offset, char *buf, tdb_len len)
-{
-	if (tdb_oob(tdb, offset + len) != 0) {
-		/* oops - trying to read beyond the end of the database! */
-		return -1;
-	}
-
-	if (tdb->map_ptr) {
-		memcpy(buf, offset + (char *)tdb->map_ptr, len);
-	} else {
-		if (lseek(tdb->fd, offset, SEEK_SET) != offset ||
-		    read(tdb->fd, buf, len) != (ssize_t)len) {
-			tdb->ecode = TDB_ERR_IO;
-			return -1;
-		}
-	}
-	return 0;
-}
-
-
-/* read a lump of data, allocating the space for it */
-static char *tdb_alloc_read(TDB_CONTEXT *tdb, tdb_off offset, tdb_len len)
-{
-	char *buf;
-
-	buf = (char *)malloc(len);
-
-	if (!buf) {
-		tdb->ecode = TDB_ERR_OOM;
-		return NULL;
-	}
-
-	if (tdb_read(tdb, offset, buf, len) == -1) {
-		free(buf);
-		return NULL;
-	}
-	
-	return buf;
-}
-
-/* convenience routine for writing a record */
-static int rec_write(TDB_CONTEXT *tdb, tdb_off offset, struct list_struct *rec)
-{
-	return tdb_write(tdb, offset, (char *)rec, sizeof(*rec));
-}
-
-/* convenience routine for writing a tdb_off */
-static int ofs_write(TDB_CONTEXT *tdb, tdb_off offset, tdb_off *d)
-{
-	return tdb_write(tdb, offset, (char *)d, sizeof(*d));
-}
-
-/* read a tdb_off from the store */
-static int ofs_read(TDB_CONTEXT *tdb, tdb_off offset, tdb_off *d)
-{
-	return tdb_read(tdb, offset, (char *)d, sizeof(*d));
-}
-
-/* read a record and check for simple errors */
-static int rec_read(TDB_CONTEXT *tdb, tdb_off offset, struct list_struct *rec)
-{
-	if (tdb_read(tdb, offset, (char *)rec, sizeof(*rec)) == -1) return -1;
-	if (rec->magic != TDB_MAGIC) {
-#if TDB_DEBUG
-		printf("bad magic 0x%08x at offset %d\n",
-		       rec->magic, offset);
-#endif
-		tdb->ecode = TDB_ERR_CORRUPT;
-		return -1;
-	}
-	if (tdb_oob(tdb, rec->next) != 0) {
-		return -1;
-	}
-	return 0;
-}
-
-/* expand the database at least length bytes by expanding the
-   underlying file and doing the mmap again if necessary */
-static int tdb_expand(TDB_CONTEXT *tdb, tdb_off length)
-{
-	struct list_struct rec;
-	tdb_off offset, ptr;
-	char b = 0;
-
-	tdb_lock(tdb,-1);
-
-	/* make sure we know about any previous expansions by another
-           process */
-	tdb_oob(tdb,tdb->map_size + 1);
-
-	/* always make room for at least 10 more records */
-	length *= TDB_LEN_MULTIPLIER;
-
-	/* and round the database up to a multiple of TDB_PAGE_SIZE */
-	length = ((tdb->map_size + length + TDB_PAGE_SIZE) & ~(TDB_PAGE_SIZE - 1)) - tdb->map_size;
-
-	/* expand the file itself */
-        if (tdb->fd != -1) {
-            lseek(tdb->fd, tdb->map_size + length - 1, SEEK_SET);
-            if (write(tdb->fd, &b, 1) != 1) goto fail;
-        }
-
-	/* form a new freelist record */
-	offset = FREELIST_TOP;
-	rec.rec_len = length - sizeof(rec);
-	rec.magic = TDB_FREE_MAGIC;
-	if (ofs_read(tdb, offset, &rec.next) == -1) {
-		goto fail;
-	}
-
-#if HAVE_MMAP
-	if (tdb->fd != -1 && tdb->map_ptr) {
-		munmap(tdb->map_ptr, tdb->map_size);
-		tdb->map_ptr = NULL;
-	}
-#endif
-
-	tdb->map_size += length;
-
-        if (tdb->fd == -1) {
-            tdb->map_ptr = realloc(tdb->map_ptr, tdb->map_size);
-        }
-
-	/* write it out */
-	if (rec_write(tdb, tdb->map_size - length, &rec) == -1) {
-		goto fail;
-	}
-
-	/* link it into the free list */
-	ptr = tdb->map_size - length;
-	if (ofs_write(tdb, offset, &ptr) == -1) goto fail;
-
-#if HAVE_MMAP
-        if (tdb->fd != -1) {
-            tdb->map_ptr = (void *)mmap(NULL, tdb->map_size, 
-                                        PROT_READ|PROT_WRITE,
-                                        MAP_SHARED | MAP_FILE, tdb->fd, 0);
-        }
-#endif
-
-	tdb_unlock(tdb, -1);
-	return 0;
-
- fail:
-	tdb_unlock(tdb,-1);
-	return -1;
-}
-
-/* allocate some space from the free list. The offset returned points
-   to a unconnected list_struct within the database with room for at
-   least length bytes of total data
-
-   0 is returned if the space could not be allocated
- */
-static tdb_off tdb_allocate(TDB_CONTEXT *tdb, tdb_len length)
-{
-	tdb_off offset, rec_ptr, last_ptr;
-	struct list_struct rec, lastrec, newrec;
-
-	tdb_lock(tdb, -1);
-
- again:
-	last_ptr = 0;
-	offset = FREELIST_TOP;
-
-	/* read in the freelist top */
-	if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-		goto fail;
-	}
-
-	/* keep looking until we find a freelist record that is big
-           enough */
-	while (rec_ptr) {
-		if (tdb_read(tdb, rec_ptr, (char *)&rec, sizeof(rec)) == -1) {
-			goto fail;
-		}
-
-		if (rec.magic != TDB_FREE_MAGIC) {
-#if TDB_DEBUG
-			printf("bad magic 0x%08x in free list\n", rec.magic);
-#endif
-			goto fail;
-		}
-
-		if (rec.rec_len >= length) {
-			/* found it - now possibly split it up  */
-			if (rec.rec_len > length + MIN_REC_SIZE) {
-				length = (length + TDB_ALIGN) & ~(TDB_ALIGN-1);
-
-				newrec.rec_len = rec.rec_len - (sizeof(rec) + length);
-				newrec.next = rec.next;
-				newrec.magic = TDB_FREE_MAGIC;
-
-				rec.rec_len = length;
-				rec.next = rec_ptr + sizeof(rec) + rec.rec_len;
-				
-				if (rec_write(tdb, rec.next, &newrec) == -1) {
-					goto fail;
-				}
-
-				if (rec_write(tdb, rec_ptr, &rec) == -1) {
-					goto fail;
-				}
-			}
-
-			/* remove it from the list */
-			if (last_ptr == 0) {
-				offset = FREELIST_TOP;
-
-				if (ofs_write(tdb, offset, &rec.next) == -1) {
-					goto fail;
-				}				
-			} else {
-				lastrec.next = rec.next;
-				if (rec_write(tdb, last_ptr, &lastrec) == -1) {
-					goto fail;
-				}
-			}
-
-			/* all done - return the new record offset */
-			tdb_unlock(tdb, -1);
-			return rec_ptr;
-		}
-
-		/* move to the next record */
-		lastrec = rec;
-		last_ptr = rec_ptr;
-		rec_ptr = rec.next;
-	}
-
-	/* we didn't find enough space. See if we can expand the
-	   database and if we can then try again */
-	if (tdb_expand(tdb, length + sizeof(rec)) == 0) goto again;
-
- fail:
-#if TDB_DEBUG
-	printf("tdb_allocate failed for size %u\n", length);
-#endif
-	tdb_unlock(tdb, -1);
-	return 0;
-}
-
-/* initialise a new database with a specified hash size */
-static int tdb_new_database(TDB_CONTEXT *tdb, int hash_size)
-{
-	struct tdb_header header;
-	tdb_off offset;
-	int i, size = 0;
-	tdb_off buf[16];
-
-        /* create the header */
-        memset(&header, 0, sizeof(header));
-        memcpy(header.magic_food, TDB_MAGIC_FOOD, strlen(TDB_MAGIC_FOOD)+1);
-        header.version = TDB_VERSION;
-        header.hash_size = hash_size;
-        lseek(tdb->fd, 0, SEEK_SET);
-        ftruncate(tdb->fd, 0);
-        
-        if (tdb->fd != -1 && write(tdb->fd, &header, sizeof(header)) != 
-            sizeof(header)) {
-            tdb->ecode = TDB_ERR_IO;
-            return -1;
-        } else size += sizeof(header);
-	
-        /* the freelist and hash pointers */
-        offset = 0;
-        memset(buf, 0, sizeof(buf));
-
-        for (i=0;(hash_size+1)-i >= 16; i += 16) {
-            if (tdb->fd != -1 && write(tdb->fd, buf, sizeof(buf)) != 
-                sizeof(buf)) {
-                tdb->ecode = TDB_ERR_IO;
-                return -1;
-            } else size += sizeof(buf);
-        }
-
-        for (;i<hash_size+1; i++) {
-            if (tdb->fd != -1 && write(tdb->fd, buf, sizeof(tdb_off)) != 
-                sizeof(tdb_off)) {
-                tdb->ecode = TDB_ERR_IO;
-                return -1;
-            } else size += sizeof(tdb_off);
-        }
-
-        if (tdb->fd == -1) {
-            tdb->map_ptr = calloc(size, 1);
-            tdb->map_size = size;
-            if (tdb->map_ptr == NULL) {
-                tdb->ecode = TDB_ERR_IO;
-                return -1;
-            }
-            memcpy(&tdb->header, &header, sizeof(header));
-        }
-
-#if TDB_DEBUG
-	printf("initialised database of hash_size %u\n", 
-	       hash_size);
-#endif
-	return 0;
-}
-
-/* Returns 0 on fail.  On success, return offset of record, and fills
-   in rec */
-static tdb_off tdb_find(TDB_CONTEXT *tdb, TDB_DATA key, unsigned int hash,
-			struct list_struct *rec)
-{
-	tdb_off offset, rec_ptr;
-	
-	/* find the top of the hash chain */
-	offset = tdb_hash_top(tdb, hash);
-
-	/* read in the hash top */
-	if (ofs_read(tdb, offset, &rec_ptr) == -1)
-		return 0;
-
-	/* keep looking until we find the right record */
-	while (rec_ptr) {
-		if (rec_read(tdb, rec_ptr, rec) == -1)
-			return 0;
-
-		if (hash == rec->full_hash && key.dsize == rec->key_len) {
-			char *k;
-			/* a very likely hit - read the key */
-			k = tdb_alloc_read(tdb, rec_ptr + sizeof(*rec), 
-					   rec->key_len);
-
-			if (!k)
-				return 0;
-
-			if (memcmp(key.dptr, k, key.dsize) == 0) {
-				free(k);
-				return rec_ptr;
-			}
-			free(k);
-		}
-
-		/* move to the next record */
-		rec_ptr = rec->next;
-	}
-	return 0;
-}
-
-/* 
-   return an error string for the last tdb error
-*/
-char *tdb_error(TDB_CONTEXT *tdb)
-{
-	int i;
-	static struct {
-		enum TDB_ERROR ecode;
-		char *estring;
-	} emap[] = {
-		{TDB_SUCCESS, "Success"},
-		{TDB_ERR_CORRUPT, "Corrupt database"},
-		{TDB_ERR_IO, "IO Error"},
-		{TDB_ERR_LOCK, "Locking error"},
-		{TDB_ERR_OOM, "Out of memory"},
-		{TDB_ERR_EXISTS, "Record exists"},
-		{-1, NULL}};
-        if (tdb != NULL) {
-            for (i=0;emap[i].estring;i++) {
-		if (tdb->ecode == emap[i].ecode) return emap[i].estring;
-            }
-        } else {
-            return "Invalid tdb context";
-        }
-	return "Invalid error code";
-}
-
-
-/* update an entry in place - this only works if the new data size
-   is <= the old data size and the key exists.
-   on failure return -1
-*/
-int tdb_update(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf)
-{
-	unsigned hash;
-	struct list_struct rec;
-	tdb_off rec_ptr;
-	int ret = -1;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_update() called with null context\n");
-#endif
-            return -1;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	tdb_lock(tdb, BUCKET(hash));
-	rec_ptr = tdb_find(tdb, key, hash, &rec);
-
-	if (!rec_ptr)
-		goto out;
-
-	/* must be long enough */
-	if (rec.rec_len < key.dsize + dbuf.dsize)
-		goto out;
-
-	if (tdb_write(tdb, rec_ptr + sizeof(rec) + rec.key_len,
-		      dbuf.dptr, dbuf.dsize) == -1)
-		goto out;
-
-	if (dbuf.dsize != rec.data_len) {
-		/* update size */
-		rec.data_len = dbuf.dsize;
-		ret = rec_write(tdb, rec_ptr, &rec);
-	} else
-		ret = 0;
-
- out:
-	tdb_unlock(tdb, BUCKET(hash));
-	return ret;
-}
-
-/* find an entry in the database given a key */
-TDB_DATA tdb_fetch(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-	unsigned hash;
-	tdb_off rec_ptr;
-	struct list_struct rec;
-	TDB_DATA ret = null_data;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_fetch() called with null context\n");
-#endif
-            return null_data;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	tdb_lock(tdb, BUCKET(hash));
-	rec_ptr = tdb_find(tdb, key, hash, &rec);
-
-	if (rec_ptr) {
-		ret.dptr = tdb_alloc_read(tdb,
-					  rec_ptr + sizeof(rec) + rec.key_len,
-					  rec.data_len);
-		ret.dsize = rec.data_len;
-	}
-	
-	tdb_unlock(tdb, BUCKET(hash));
-	return ret;
-}
-
-/* check if an entry in the database exists 
-
-   note that 1 is returned if the key is found and 0 is returned if not found
-   this doesn't match the conventions in the rest of this module, but is
-   compatible with gdbm
-*/
-int tdb_exists(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-	unsigned hash;
-	tdb_off rec_ptr;
-	struct list_struct rec;
-	
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_exists() called with null context\n");
-#endif
-            return 0;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	tdb_lock(tdb, BUCKET(hash));
-	rec_ptr = tdb_find(tdb, key, hash, &rec);
-	tdb_unlock(tdb, BUCKET(hash));
-
-	return rec_ptr != 0;
-}
-
-/* traverse the entire database - calling fn(tdb, key, data) on each element.
-   return -1 on error or the record count traversed
-   if fn is NULL then it is not called
-   a non-zero return value from fn() indicates that the traversal should stop
-  */
-int tdb_traverse(TDB_CONTEXT *tdb, int (*fn)(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, void* state), void* state)
-{
-	int count = 0;
-	unsigned h;
-	tdb_off offset, rec_ptr;
-	struct list_struct rec;
-	char *data;
-	TDB_DATA key, dbuf;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_traverse() called with null context\n");
-#endif
-            return -1;
-        }
-
-	/* loop over all hash chains */
-	for (h = 0; h < tdb->header.hash_size; h++) {
-		tdb_lock(tdb, BUCKET(h));
-
-		/* read in the hash top */
-		offset = tdb_hash_top(tdb, h);
-		if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-			goto fail;
-		}
-
-		/* traverse all records for this hash */
-		while (rec_ptr) {
-			if (rec_read(tdb, rec_ptr, &rec) == -1) {
-				goto fail;
-			}
-
-			/* now read the full record */
-			data = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), 
-					     rec.key_len + rec.data_len);
-			if (!data) {
-				goto fail;
-			}
-
-			key.dptr = data;
-			key.dsize = rec.key_len;
-			dbuf.dptr = data + rec.key_len;
-			dbuf.dsize = rec.data_len;
-			count++;
-
-			if (fn && fn(tdb, key, dbuf, state) != 0) {
-				/* they want us to stop traversing */
-				free(data);
-				tdb_unlock(tdb, BUCKET(h));
-				return count;
-			}
-
-			/* a miss - drat */
-			free(data);
-
-			/* move to the next record */
-			rec_ptr = rec.next;
-		}
-		tdb_unlock(tdb, BUCKET(h));
-	}
-
-	/* return the number traversed */
-	return count;
-
- fail:
-	tdb_unlock(tdb, BUCKET(h));
-	return -1;
-}
-
-
-/* find the first entry in the database and return its key */
-TDB_DATA tdb_firstkey(TDB_CONTEXT *tdb)
-{
-	tdb_off offset, rec_ptr;
-	struct list_struct rec;
-	unsigned hash;
-	TDB_DATA ret;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_firstkey() called with null context\n");
-#endif
-            return null_data;
-        }
-
-	/* look for a non-empty hash chain */
-	for (hash = 0, rec_ptr = 0; 
-	     hash < tdb->header.hash_size;
-	     hash++) {
-		/* find the top of the hash chain */
-		offset = tdb_hash_top(tdb, hash);
-
-		tdb_lock(tdb, BUCKET(hash));
-
-		/* read in the hash top */
-		if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-			goto fail;
-		}
-
-		if (rec_ptr) break;
-
-		tdb_unlock(tdb, BUCKET(hash));
-	}
-
-	if (rec_ptr == 0) return null_data;
-
-	/* we've found a non-empty chain, now read the record */
-	if (rec_read(tdb, rec_ptr, &rec) == -1) {
-		goto fail;
-	}
-
-	/* allocate and read the key space */
-	ret.dptr = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), rec.key_len);
-	ret.dsize = rec.key_len;
-	tdb_unlock(tdb, BUCKET(hash));
-	return ret;
-
- fail:
-	tdb_unlock(tdb, BUCKET(hash));
-	return null_data;
-}
-
-/* find the next entry in the database, returning its key */
-TDB_DATA tdb_nextkey(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-	unsigned hash, hbucket;
-	tdb_off rec_ptr, offset;
-	struct list_struct rec;
-	TDB_DATA ret;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_nextkey() called with null context\n");
-#endif
-            return null_data;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-	hbucket = BUCKET(hash);
-	
-	tdb_lock(tdb, hbucket);
-	rec_ptr = tdb_find(tdb, key, hash, &rec);
-	if (rec_ptr) {
-		/* we want the next record after this one */
-		rec_ptr = rec.next;
-	}
-
-	/* not found or last in hash: look for next non-empty hash chain */
-	while (rec_ptr == 0) {
-		tdb_unlock(tdb, hbucket);
-
-		if (++hbucket >= tdb->header.hash_size - 1)
-			return null_data;
-
-		offset = tdb_hash_top(tdb, hbucket);
-		tdb_lock(tdb, hbucket);
-		/* read in the hash top */
-		if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-			tdb_unlock(tdb, hbucket);
-			return null_data;
-		}
-	}
-
-	/* Read the record. */
-	if (rec_read(tdb, rec_ptr, &rec) == -1) {
-		tdb_unlock(tdb, hbucket);
-		return null_data;
-	}
-	/* allocate and read the key */
-	ret.dptr = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), rec.key_len);
-	ret.dsize = rec.key_len;
-	tdb_unlock(tdb, hbucket);
-
-	return ret;
-}
-
-/* delete an entry in the database given a key */
-int tdb_delete(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-	unsigned hash;
-	tdb_off offset, rec_ptr, last_ptr;
-	struct list_struct rec, lastrec;
-	char *data = NULL;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_delete() called with null context\n");
-#endif
-            return -1;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	tdb_lock(tdb, BUCKET(hash));
-
-	/* find the top of the hash chain */
-	offset = tdb_hash_top(tdb, hash);
-
-	/* read in the hash top */
-	if (ofs_read(tdb, offset, &rec_ptr) == -1) {
-		goto fail;
-	}
-
-	last_ptr = 0;
-
-	/* keep looking until we find the right record */
-	while (rec_ptr) {
-		if (rec_read(tdb, rec_ptr, &rec) == -1) {
-			goto fail;
-		}
-
-		if (hash == rec.full_hash && key.dsize == rec.key_len) {
-			/* a very likely hit - read the record and full key */
-			data = tdb_alloc_read(tdb, rec_ptr + sizeof(rec), 
-					     rec.key_len);
-			if (!data) {
-				goto fail;
-			}
-
-			if (memcmp(key.dptr, data, key.dsize) == 0) {
-				/* a definite match - delete it */
-				if (last_ptr == 0) {
-					offset = tdb_hash_top(tdb, hash);
-					if (ofs_write(tdb, offset, &rec.next) == -1) {
-						goto fail;
-					}
-				} else {
-					lastrec.next = rec.next;
-					if (rec_write(tdb, last_ptr, &lastrec) == -1) {
-						goto fail;
-					}					
-				}
-				tdb_unlock(tdb, BUCKET(hash));
-				tdb_lock(tdb, -1);
-				/* and recover the space */
-				offset = FREELIST_TOP;
-				if (ofs_read(tdb, offset, &rec.next) == -1) {
-					goto fail2;
-				}
-				rec.magic = TDB_FREE_MAGIC;
-				if (rec_write(tdb, rec_ptr, &rec) == -1) {
-					goto fail2;
-				}
-				if (ofs_write(tdb, offset, &rec_ptr) == -1) {
-					goto fail2;
-				}
-
-				/* yipee - all done */
-				free(data);
-				tdb_unlock(tdb, -1);
-				return 0;
-			}
-
-			/* a miss - drat */
-			free(data);
-			data = NULL;
-		}
-
-		/* move to the next record */
-		last_ptr = rec_ptr;
-		lastrec = rec;
-		rec_ptr = rec.next;
-	}
-
- fail:
-	if (data) free(data);
-	tdb_unlock(tdb, BUCKET(hash));
-	return -1;
-
- fail2:
-	if (data) free(data);
-	tdb_unlock(tdb, -1);
-	return -1;
-}
-
-
-/* store an element in the database, replacing any existing element
-   with the same key 
-
-   return 0 on success, -1 on failure
-*/
-int tdb_store(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, int flag)
-{
-	struct list_struct rec;
-	unsigned hash;
-	tdb_off rec_ptr, offset;
-	char *p = NULL;
-
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_store() called with null context\n");
-#endif
-            return -1;
-        }
-
-	/* find which hash bucket it is in */
-	hash = tdb_hash(&key);
-
-	/* check for it existing */
-	if (flag == TDB_INSERT && tdb_exists(tdb, key)) {
-		tdb->ecode = TDB_ERR_EXISTS;
-		return -1;
-	}
-
-	/* first try in-place update */
-	if (flag != TDB_INSERT && tdb_update(tdb, key, dbuf) == 0) {
-		return 0;
-	}
-
-	rec_ptr = tdb_allocate(tdb, key.dsize + dbuf.dsize);
-	if (rec_ptr == 0) {
-		return -1;
-	}
-
-	tdb_lock(tdb, BUCKET(hash));
-
-	/* delete any existing record - if it doesn't exist we don't care */
-	if (flag != TDB_INSERT) {
-		tdb_delete(tdb, key);
-	}
-
-	/* read the newly created record */
-	if (tdb_read(tdb, rec_ptr, (char *)&rec, sizeof(rec)) == -1) {
-		goto fail;
-	}
-
-	if (rec.magic != TDB_FREE_MAGIC) goto fail;
-
-	/* find the top of the hash chain */
-	offset = tdb_hash_top(tdb, hash);
-
-	/* read in the hash top diretcly into our next pointer */
-	if (ofs_read(tdb, offset, &rec.next) == -1) {
-		goto fail;
-	}
-
-	rec.key_len = key.dsize;
-	rec.data_len = dbuf.dsize;
-	rec.full_hash = hash;
-	rec.magic = TDB_MAGIC;
-
-	p = (char *)malloc(sizeof(rec) + key.dsize + dbuf.dsize);
-	if (!p) {
-		tdb->ecode = TDB_ERR_OOM;
-		goto fail;
-	}
-
-	memcpy(p, &rec, sizeof(rec));
-	memcpy(p+sizeof(rec), key.dptr, key.dsize);
-	memcpy(p+sizeof(rec)+key.dsize, dbuf.dptr, dbuf.dsize);
-
-	if (tdb_write(tdb, rec_ptr, p, sizeof(rec)+key.dsize+dbuf.dsize) == -1)
-		goto fail;
-
-	free(p); 
-	p = NULL;
-
-	/* and point the top of the hash chain at it */
-	if (ofs_write(tdb, offset, &rec_ptr) == -1) goto fail;
-
-	tdb_unlock(tdb, BUCKET(hash));
-	return 0;
-
- fail:
-#if TDB_DEBUG
-	printf("store failed for hash 0x%08x in bucket %u\n", hash, BUCKET(hash));
-#endif
-	if (p) free(p);
-	tdb_unlock(tdb, BUCKET(hash));
-	return -1;
-}
-
-
-/* open the database, creating it if necessary 
-
-   The open_flags and mode are passed straight to the open call on the database
-   file. A flags value of O_WRONLY is invalid
-
-   The hash size is advisory, use zero for a default value. 
-
-   return is NULL on error
-*/
-TDB_CONTEXT *tdb_open(char *name, int hash_size, int tdb_flags,
-		      int open_flags, mode_t mode)
-{
-	TDB_CONTEXT tdb, *ret;
-	struct stat st;
-
-	memset(&tdb, 0, sizeof(tdb));
-
-	tdb.fd = -1;
-	tdb.name = NULL;
-	tdb.map_ptr = NULL;
-
-	if ((open_flags & O_ACCMODE) == O_WRONLY) {
-		goto fail;
-	}
-
-	if (hash_size == 0) hash_size = DEFAULT_HASH_SIZE;
-
-	tdb.read_only = ((open_flags & O_ACCMODE) == O_RDONLY);
-
-        if (name != NULL) {
-            tdb.fd = open(name, open_flags, mode);
-            if (tdb.fd == -1) {
-		goto fail;
-            }
-        }
-
-	/* ensure there is only one process initialising at once */
-	tdb_brlock(&tdb, GLOBAL_LOCK, LOCK_SET, F_WRLCK, F_SETLKW);
-	
-	if (tdb_flags & TDB_CLEAR_IF_FIRST) {
-		/* we need to zero the database if we are the only
-		   one with it open */
-		if (tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_SET, F_WRLCK, F_SETLK) == 0) {
-			ftruncate(tdb.fd, 0);
-			tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_CLEAR, F_WRLCK, F_SETLK);
-		}
-	}
-
-	/* leave this lock in place */
-	tdb_brlock(&tdb, ACTIVE_LOCK, LOCK_SET, F_RDLCK, F_SETLKW);
-
-	if (read(tdb.fd, &tdb.header, sizeof(tdb.header)) != sizeof(tdb.header) ||
-	    strcmp(tdb.header.magic_food, TDB_MAGIC_FOOD) != 0 ||
-	    tdb.header.version != TDB_VERSION) {
-		/* its not a valid database - possibly initialise it */
-		if (!(open_flags & O_CREAT)) {
-			goto fail;
-		}
-		if (tdb_new_database(&tdb, hash_size) == -1) goto fail;
-
-		lseek(tdb.fd, 0, SEEK_SET);
-		if (tdb.fd != -1 && read(tdb.fd, &tdb.header, 
-                                         sizeof(tdb.header)) != 
-                                         sizeof(tdb.header)) 
-                    goto fail;
-	}
-
-        if (tdb.fd != -1) {
-            fstat(tdb.fd, &st);
-
-            /* map the database and fill in the return structure */
-            tdb.name = (char *)strdup(name);
-            tdb.map_size = st.st_size;
-        }
-
-        tdb.locked = (int *)calloc(tdb.header.hash_size+1, 
-                                   sizeof(tdb.locked[0]));
-        if (!tdb.locked) {
-            goto fail;
-        }
-
-#if HAVE_MMAP
-        if (tdb.fd != -1) {
-            tdb.map_ptr = (void *)mmap(NULL, st.st_size, 
-                                       tdb.read_only? PROT_READ : PROT_READ|PROT_WRITE,
-                                       MAP_SHARED | MAP_FILE, tdb.fd, 0);
-        }
-#endif
-
-	ret = (TDB_CONTEXT *)malloc(sizeof(tdb));
-	if (!ret) goto fail;
-
-	*ret = tdb;
-
-#if TDB_DEBUG
-	printf("mapped database of hash_size %u map_size=%u\n", 
-	       hash_size, tdb.map_size);
-#endif
-
-	tdb_brlock(&tdb, GLOBAL_LOCK, LOCK_CLEAR, F_WRLCK, F_SETLKW);
-	return ret;
-
- fail:
-        if (tdb.name) free(tdb.name);
-	if (tdb.fd != -1) close(tdb.fd);
-	if (tdb.map_ptr) munmap(tdb.map_ptr, tdb.map_size);
-
-	return NULL;
-}
-
-/* close a database */
-int tdb_close(TDB_CONTEXT *tdb)
-{
-	if (!tdb) return -1;
-
-	if (tdb->name) free(tdb->name);
-	if (tdb->fd != -1) close(tdb->fd);
-	if (tdb->locked) free(tdb->locked);
-
-	if (tdb->map_ptr) {
-            if (tdb->fd != -1) {
-                munmap(tdb->map_ptr, tdb->map_size);
-            } else {
-                free(tdb->map_ptr);
-            }
-        }
-
-	memset(tdb, 0, sizeof(*tdb));
-	free(tdb);
-
-	return 0;
-}
-
-/* lock the database. If we already have it locked then don't do anything */
-int tdb_writelock(TDB_CONTEXT *tdb)
-{
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_writelock() called with null context\n");
-#endif
-            return -1;
-        }
-
-	return tdb_lock(tdb, -1);
-}
-
-/* unlock the database. */
-int tdb_writeunlock(TDB_CONTEXT *tdb)
-{
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_writeunlock() called with null context\n");
-#endif
-            return -1;
-        }
-
-	return tdb_unlock(tdb, -1);
-}
-
-/* lock one hash chain. This is meant to be used to reduce locking
-   contention - it cannot guarantee how many records will be locked */
-int tdb_lockchain(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_lockchain() called with null context\n");
-#endif
-            return -1;
-        }
-
-	return tdb_lock(tdb, BUCKET(tdb_hash(&key)));
-}
-
-
-/* unlock one hash chain */
-int tdb_unlockchain(TDB_CONTEXT *tdb, TDB_DATA key)
-{
-        if (tdb == NULL) {
-#ifdef TDB_DEBUG
-            printf("tdb_unlockchain() called with null context\n");
-#endif
-            return -1;
-        }
-
-	return tdb_unlock(tdb, BUCKET(tdb_hash(&key)));
-}
diff --git a/mdk-stage1/ppp/pppd/tdb.h b/mdk-stage1/ppp/pppd/tdb.h
deleted file mode 100644
index 56ae0ac2a..000000000
--- a/mdk-stage1/ppp/pppd/tdb.h
+++ /dev/null
@@ -1,77 +0,0 @@
-#define STANDALONE	1
-/* 
- * Database functions
- * Copyright (C) Andrew Tridgell 1999
- * 
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms AND provided that this software or
- * any derived work is only used as part of the PPP daemon (pppd)
- * and related utilities.
- * The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Note: this software is also available under the Gnu Public License
- * version 2 or later.
- */
-
-typedef unsigned tdb_len;
-typedef unsigned tdb_off;
-
-#define TDB_MAGIC_FOOD "TDB file\n"
-
-/* this is stored at the front of every database */
-struct tdb_header {
-	char magic_food[32]; /* for /etc/magic */
-	unsigned version; /* version of the code */
-	unsigned hash_size; /* number of hash entries */
-};
-
-typedef struct {
-	char *dptr;
-	size_t dsize;
-} TDB_DATA;
-
-/* this is the context structure that is returned from a db open */
-typedef struct {
-	char *name; /* the name of the database */
-	void *map_ptr; /* where it is currently mapped */
-	int fd; /* open file descriptor for the database */
-	tdb_len map_size; /* how much space has been mapped */
-	int read_only; /* opened read-only */
-	int *locked; /* set if we have a chain locked */
-	int ecode; /* error code for last tdb error */
-	struct tdb_header header; /* a cached copy of the header */
-} TDB_CONTEXT;
-
-/* flags to tdb_store() */
-#define TDB_REPLACE 1
-#define TDB_INSERT 2
-
-/* flags for tdb_open() */
-#define TDB_CLEAR_IF_FIRST 1
-
-/* error codes */
-enum TDB_ERROR {TDB_SUCCESS=0, TDB_ERR_CORRUPT, TDB_ERR_IO, TDB_ERR_LOCK, 
-		TDB_ERR_OOM, TDB_ERR_EXISTS};
-
-#if STANDALONE
-TDB_CONTEXT *tdb_open(char *name, int hash_size, int tdb_flags,
-		      int open_flags, mode_t mode);
-char *tdb_error(TDB_CONTEXT *tdb);
-int tdb_writelock(TDB_CONTEXT *tdb);
-int tdb_writeunlock(TDB_CONTEXT *tdb);
-TDB_DATA tdb_fetch(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_delete(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_store(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, int flag);
-int tdb_close(TDB_CONTEXT *tdb);
-TDB_DATA tdb_firstkey(TDB_CONTEXT *tdb);
-TDB_DATA tdb_nextkey(TDB_CONTEXT *tdb, TDB_DATA key);
-int tdb_traverse(TDB_CONTEXT *tdb, 
-	int (*fn)(TDB_CONTEXT *tdb, TDB_DATA key, TDB_DATA dbuf, void *state),
-	void *state);
-int tdb_exists(TDB_CONTEXT *tdb, TDB_DATA key);
-#endif
diff --git a/mdk-stage1/ppp/pppd/tty.c b/mdk-stage1/ppp/pppd/tty.c
deleted file mode 100644
index 4db707968..000000000
--- a/mdk-stage1/ppp/pppd/tty.c
+++ /dev/null
@@ -1,1164 +0,0 @@
-/*
- * tty.c - code for handling serial ports in pppd.
- *
- * Copyright (C) 2000 Paul Mackerras.
- * All rights reserved.
- *
- * Portions Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <setjmp.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#include <arpa/inet.h>
-
-#include "pppd.h"
-#include "fsm.h"
-#include "lcp.h"
-
-void tty_process_extra_options __P((void));
-void tty_check_options __P((void));
-int  connect_tty __P((void));
-void disconnect_tty __P((void));
-void tty_close_fds __P((void));
-void cleanup_tty __P((void));
-void tty_do_send_config __P((int, u_int32_t, int, int));
-
-static int setdevname __P((char *, char **, int));
-static int setspeed __P((char *, char **, int));
-static int setxonxoff __P((char **));
-static int setescape __P((char **));
-static void printescape __P((option_t *, void (*)(void *, char *,...),void *));
-static void finish_tty __P((void));
-static int start_charshunt __P((int, int));
-static void stop_charshunt __P((void *, int));
-static void charshunt_done __P((void *));
-static void charshunt __P((int, int, char *));
-static int record_write __P((FILE *, int code, u_char *buf, int nb,
-			     struct timeval *));
-static int open_socket __P((char *));
-static void maybe_relock __P((void *, int));
-
-static int pty_master;		/* fd for master side of pty */
-static int pty_slave;		/* fd for slave side of pty */
-static int real_ttyfd;		/* fd for actual serial port (not pty) */
-static int ttyfd;		/* Serial port file descriptor */
-static char speed_str[16];	/* Serial port speed as string */
-
-mode_t tty_mode = (mode_t)-1;	/* Original access permissions to tty */
-int baud_rate;			/* Actual bits/second for serial device */
-char *callback_script;		/* script for doing callback */
-int charshunt_pid;		/* Process ID for charshunt */
-int locked;			/* lock() has succeeded */
-struct stat devstat;		/* result of stat() on devnam */
-
-/* option variables */
-int	crtscts = 0;		/* Use hardware flow control */
-bool	modem = 1;		/* Use modem control lines */
-int	inspeed = 0;		/* Input/Output speed requested */
-bool	lockflag = 0;		/* Create lock file to lock the serial dev */
-char	*initializer = NULL;	/* Script to initialize physical link */
-char	*connect_script = NULL;	/* Script to establish physical link */
-char	*disconnect_script = NULL; /* Script to disestablish physical link */
-char	*welcomer = NULL;	/* Script to run after phys link estab. */
-char	*ptycommand = NULL;	/* Command to run on other side of pty */
-bool	notty = 0;		/* Stdin/out is not a tty */
-char	*record_file = NULL;	/* File to record chars sent/received */
-int	max_data_rate;		/* max bytes/sec through charshunt */
-bool	sync_serial = 0;	/* Device is synchronous serial device */
-char	*pty_socket = NULL;	/* Socket to connect to pty */
-int	using_pty = 0;		/* we're allocating a pty as the device */
-
-extern uid_t uid;
-extern int kill_link;
-
-/* XXX */
-extern int privopen;		/* don't lock, open device as root */
-
-u_int32_t xmit_accm[8];		/* extended transmit ACCM */
-
-/* option descriptors */
-option_t tty_options[] = {
-    /* device name must be first, or change connect_tty() below! */
-    { "device name", o_wild, (void *) &setdevname,
-      "Serial port device name",
-      OPT_DEVNAM | OPT_PRIVFIX | OPT_NOARG  | OPT_A2STRVAL | OPT_STATIC,
-      devnam},
-
-    { "tty speed", o_wild, (void *) &setspeed,
-      "Baud rate for serial port",
-      OPT_PRIO | OPT_NOARG | OPT_A2STRVAL | OPT_STATIC, speed_str },
-
-    { "lock", o_bool, &lockflag,
-      "Lock serial device with UUCP-style lock file", OPT_PRIO | 1 },
-    { "nolock", o_bool, &lockflag,
-      "Don't lock serial device", OPT_PRIOSUB | OPT_PRIV },
-
-    { "init", o_string, &initializer,
-      "A program to initialize the device", OPT_PRIO | OPT_PRIVFIX },
-
-    { "connect", o_string, &connect_script,
-      "A program to set up a connection", OPT_PRIO | OPT_PRIVFIX },
-
-    { "disconnect", o_string, &disconnect_script,
-      "Program to disconnect serial device", OPT_PRIO | OPT_PRIVFIX },
-
-    { "welcome", o_string, &welcomer,
-      "Script to welcome client", OPT_PRIO | OPT_PRIVFIX },
-
-    { "pty", o_string, &ptycommand,
-      "Script to run on pseudo-tty master side",
-      OPT_PRIO | OPT_PRIVFIX | OPT_DEVNAM },
-
-    { "notty", o_bool, &notty,
-      "Input/output is not a tty", OPT_DEVNAM | 1 },
-
-    { "socket", o_string, &pty_socket,
-      "Send and receive over socket, arg is host:port",
-      OPT_PRIO | OPT_DEVNAM },
-
-    { "record", o_string, &record_file,
-      "Record characters sent/received to file", OPT_PRIO },
-
-    { "crtscts", o_int, &crtscts,
-      "Set hardware (RTS/CTS) flow control",
-      OPT_PRIO | OPT_NOARG | OPT_VAL(1) },
-    { "cdtrcts", o_int, &crtscts,
-      "Set alternate hardware (DTR/CTS) flow control",
-      OPT_PRIOSUB | OPT_NOARG | OPT_VAL(2) },
-    { "nocrtscts", o_int, &crtscts,
-      "Disable hardware flow control",
-      OPT_PRIOSUB | OPT_NOARG | OPT_VAL(-1) },
-    { "-crtscts", o_int, &crtscts,
-      "Disable hardware flow control",
-      OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
-    { "nocdtrcts", o_int, &crtscts,
-      "Disable hardware flow control",
-      OPT_PRIOSUB | OPT_ALIAS | OPT_NOARG | OPT_VAL(-1) },
-    { "xonxoff", o_special_noarg, (void *)setxonxoff,
-      "Set software (XON/XOFF) flow control", OPT_PRIOSUB },
-
-    { "modem", o_bool, &modem,
-      "Use modem control lines", OPT_PRIO | 1 },
-    { "local", o_bool, &modem,
-      "Don't use modem control lines", OPT_PRIOSUB | 0 },
-
-    { "sync", o_bool, &sync_serial,
-      "Use synchronous HDLC serial encoding", 1 },
-
-    { "datarate", o_int, &max_data_rate,
-      "Maximum data rate in bytes/sec (with pty, notty or record option)",
-      OPT_PRIO },
-
-    { "escape", o_special, (void *)setescape,
-      "List of character codes to escape on transmission",
-      OPT_A2PRINTER, (void *)printescape },
-
-    { NULL }
-};
-
-
-struct channel tty_channel = {
-	tty_options,
-	&tty_process_extra_options,
-	&tty_check_options,
-	&connect_tty,
-	&disconnect_tty,
-	&tty_establish_ppp,
-	&tty_disestablish_ppp,
-	&tty_do_send_config,
-	&tty_recv_config,
-	&cleanup_tty,
-	&tty_close_fds
-};
-
-/*
- * setspeed - Set the serial port baud rate.
- * If doit is 0, the call is to check whether this option is
- * potentially a speed value.
- */
-static int
-setspeed(arg, argv, doit)
-    char *arg;
-    char **argv;
-    int doit;
-{
-	char *ptr;
-	int spd;
-
-	spd = strtol(arg, &ptr, 0);
-	if (ptr == arg || *ptr != 0 || spd == 0)
-		return 0;
-	if (doit) {
-		inspeed = spd;
-		slprintf(speed_str, sizeof(speed_str), "%d", spd);
-	}
-	return 1;
-}
-
-
-/*
- * setdevname - Set the device name.
- * If doit is 0, the call is to check whether this option is
- * potentially a device name.
- */
-static int
-setdevname(cp, argv, doit)
-    char *cp;
-    char **argv;
-    int doit;
-{
-	struct stat statbuf;
-	char dev[MAXPATHLEN];
-
-	if (*cp == 0)
-		return 0;
-
-	if (strncmp("/dev/", cp, 5) != 0) {
-		strlcpy(dev, "/dev/", sizeof(dev));
-		strlcat(dev, cp, sizeof(dev));
-		cp = dev;
-	}
-
-	/*
-	 * Check if there is a character device by this name.
-	 */
-	if (stat(cp, &statbuf) < 0) {
-		if (!doit)
-			return errno != ENOENT;
-		option_error("Couldn't stat %s: %m", cp);
-		return 0;
-	}
-	if (!S_ISCHR(statbuf.st_mode)) {
-		if (doit)
-			option_error("%s is not a character device", cp);
-		return 0;
-	}
-
-	if (doit) {
-		strlcpy(devnam, cp, sizeof(devnam));
-		devstat = statbuf;
-		default_device = 0;
-	}
-  
-	return 1;
-}
-
-static int
-setxonxoff(argv)
-    char **argv;
-{
-	lcp_wantoptions[0].asyncmap |= 0x000A0000;	/* escape ^S and ^Q */
-	lcp_wantoptions[0].neg_asyncmap = 1;
-
-	crtscts = -2;
-	return 1;
-}
-
-/*
- * setescape - add chars to the set we escape on transmission.
- */
-static int
-setescape(argv)
-    char **argv;
-{
-    int n, ret;
-    char *p, *endp;
-
-    p = *argv;
-    ret = 1;
-    while (*p) {
-	n = strtol(p, &endp, 16);
-	if (p == endp) {
-	    option_error("escape parameter contains invalid hex number '%s'",
-			 p);
-	    return 0;
-	}
-	p = endp;
-	if (n < 0 || n == 0x5E || n > 0xFF) {
-	    option_error("can't escape character 0x%x", n);
-	    ret = 0;
-	} else
-	    xmit_accm[n >> 5] |= 1 << (n & 0x1F);
-	while (*p == ',' || *p == ' ')
-	    ++p;
-    }
-    lcp_allowoptions[0].asyncmap = xmit_accm[0];
-    return ret;
-}
-
-static void
-printescape(opt, printer, arg)
-    option_t *opt;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-	int n;
-	int first = 1;
-
-	for (n = 0; n < 256; ++n) {
-		if (n == 0x7d)
-			n += 2;		/* skip 7d, 7e */
-		if (xmit_accm[n >> 5] & (1 << (n & 0x1f))) {
-			if (!first)
-				printer(arg, ",");
-			else
-				first = 0;
-			printer(arg, "%x", n);
-		}
-	}
-	if (first)
-		printer(arg, "oops # nothing escaped");
-}
-
-/*
- * tty_init - do various tty-related initializations.
- */
-void tty_init()
-{
-    add_notifier(&pidchange, maybe_relock, 0);
-    the_channel = &tty_channel;
-    xmit_accm[3] = 0x60000000;
-}
-
-/*
- * tty_process_extra_options - work out which tty device we are using
- * and read its options file.
- */
-void tty_process_extra_options()
-{
-	using_pty = notty || ptycommand != NULL || pty_socket != NULL;
-	if (using_pty)
-		return;
-	if (default_device) {
-		char *p;
-		if (!isatty(0) || (p = ttyname(0)) == NULL) {
-			option_error("no device specified and stdin is not a tty");
-			exit(EXIT_OPTION_ERROR);
-		}
-		strlcpy(devnam, p, sizeof(devnam));
-		if (stat(devnam, &devstat) < 0)
-			fatal("Couldn't stat default device %s: %m", devnam);
-	}
-
-
-	/*
-	 * Parse the tty options file.
-	 * The per-tty options file should not change
-	 * ptycommand, pty_socket, notty or devnam.
-	 * options_for_tty doesn't override options set on the command line,
-	 * except for some privileged options.
-	 */
-	if (!options_for_tty())
-		exit(EXIT_OPTION_ERROR);
-}
-
-/*
- * tty_check_options - do consistency checks on the options we were given.
- */
-void
-tty_check_options()
-{
-	struct stat statbuf;
-	int fdflags;
-
-	if (demand && connect_script == 0) {
-		option_error("connect script is required for demand-dialling\n");
-		exit(EXIT_OPTION_ERROR);
-	}
-	/* default holdoff to 0 if no connect script has been given */
-	if (connect_script == 0 && !holdoff_specified)
-		holdoff = 0;
-
-	if (using_pty) {
-		if (!default_device) {
-			option_error("%s option precludes specifying device name",
-				     notty? "notty": "pty");
-			exit(EXIT_OPTION_ERROR);
-		}
-		if (ptycommand != NULL && notty) {
-			option_error("pty option is incompatible with notty option");
-			exit(EXIT_OPTION_ERROR);
-		}
-		if (pty_socket != NULL && (ptycommand != NULL || notty)) {
-			option_error("socket option is incompatible with pty and notty");
-			exit(EXIT_OPTION_ERROR);
-		}
-		default_device = notty;
-		lockflag = 0;
-		modem = 0;
-		if (notty && log_to_fd <= 1)
-			log_to_fd = -1;
-	} else {
-		/*
-		 * If the user has specified a device which is the same as
-		 * the one on stdin, pretend they didn't specify any.
-		 * If the device is already open read/write on stdin,
-		 * we assume we don't need to lock it, and we can open it
-		 * as root.
-		 */
-		if (fstat(0, &statbuf) >= 0 && S_ISCHR(statbuf.st_mode)
-		    && statbuf.st_rdev == devstat.st_rdev) {
-			default_device = 1;
-			fdflags = fcntl(0, F_GETFL);
-			if (fdflags != -1 && (fdflags & O_ACCMODE) == O_RDWR)
-				privopen = 1;
-		}
-	}
-	if (default_device)
-		nodetach = 1;
-
-	/*
-	 * Don't send log messages to the serial port, it tends to
-	 * confuse the peer. :-)
-	 */
-	if (log_to_fd >= 0 && fstat(log_to_fd, &statbuf) >= 0
-	    && S_ISCHR(statbuf.st_mode) && statbuf.st_rdev == devstat.st_rdev)
-		log_to_fd = -1;
-}
-
-/*
- * connect_tty - get the serial port ready to start doing PPP.
- * That is, open the serial port, set its speed and mode, and run
- * the connector and/or welcomer.
- */
-int connect_tty()
-{
-	char *connector;
-	int fdflags;
-	struct stat statbuf;
-	char numbuf[16];
-
-	/*
-	 * Get a pty master/slave pair if the pty, notty, socket,
-	 * or record options were specified.
-	 */
-	strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
-	pty_master = -1;
-	pty_slave = -1;
-	real_ttyfd = -1;
-	if (using_pty || record_file != NULL) {
-		if (!get_pty(&pty_master, &pty_slave, ppp_devnam, uid)) {
-			error("Couldn't allocate pseudo-tty");
-			status = EXIT_FATAL_ERROR;
-			return -1;
-		}
-		set_up_tty(pty_slave, 1);
-	}
-
-	/*
-	 * Lock the device if we've been asked to.
-	 */
-	status = EXIT_LOCK_FAILED;
-	if (lockflag && !privopen) {
-		if (lock(devnam) < 0)
-			return -1;
-		locked = 1;
-	}
-
-	/*
-	 * Open the serial device and set it up to be the ppp interface.
-	 * First we open it in non-blocking mode so we can set the
-	 * various termios flags appropriately.  If we aren't dialling
-	 * out and we want to use the modem lines, we reopen it later
-	 * in order to wait for the carrier detect signal from the modem.
-	 */
-	hungup = 0;
-	kill_link = 0;
-	connector = doing_callback? callback_script: connect_script;
-	if (devnam[0] != 0) {
-		for (;;) {
-			/* If the user specified the device name, become the
-			   user before opening it. */
-			int err, prio;
-
-			prio = privopen? OPRIO_ROOT: tty_options[0].priority;
-			if (prio < OPRIO_ROOT)
-				seteuid(uid);
-			ttyfd = open(devnam, O_NONBLOCK | O_RDWR, 0);
-			err = errno;
-			if (prio < OPRIO_ROOT)
-				seteuid(0);
-			if (ttyfd >= 0)
-				break;
-			errno = err;
-			if (err != EINTR) {
-				error("Failed to open %s: %m", devnam);
-				status = EXIT_OPEN_FAILED;
-			}
-			if (!persist || err != EINTR)
-				return -1;
-		}
-		real_ttyfd = ttyfd;
-		if ((fdflags = fcntl(ttyfd, F_GETFL)) == -1
-		    || fcntl(ttyfd, F_SETFL, fdflags & ~O_NONBLOCK) < 0)
-			warn("Couldn't reset non-blocking mode on device: %m");
-
-		/*
-		 * Do the equivalent of `mesg n' to stop broadcast messages.
-		 */
-		if (fstat(ttyfd, &statbuf) < 0
-		    || fchmod(ttyfd, statbuf.st_mode & ~(S_IWGRP | S_IWOTH)) < 0) {
-			warn("Couldn't restrict write permissions to %s: %m", devnam);
-		} else
-			tty_mode = statbuf.st_mode;
-
-		/*
-		 * Set line speed, flow control, etc.
-		 * If we have a non-null connection or initializer script,
-		 * on most systems we set CLOCAL for now so that we can talk
-		 * to the modem before carrier comes up.  But this has the
-		 * side effect that we might miss it if CD drops before we
-		 * get to clear CLOCAL below.  On systems where we can talk
-		 * successfully to the modem with CLOCAL clear and CD down,
-		 * we could clear CLOCAL at this point.
-		 */
-		set_up_tty(ttyfd, ((connector != NULL && connector[0] != 0)
-				   || initializer != NULL));
-	}
-
-	/*
-	 * If the pty, socket, notty and/or record option was specified,
-	 * start up the character shunt now.
-	 */
-	status = EXIT_PTYCMD_FAILED;
-	if (ptycommand != NULL) {
-		if (record_file != NULL) {
-			int ipipe[2], opipe[2], ok;
-
-			if (pipe(ipipe) < 0 || pipe(opipe) < 0)
-				fatal("Couldn't create pipes for record option: %m");
-			ok = device_script(ptycommand, opipe[0], ipipe[1], 1) == 0
-				&& start_charshunt(ipipe[0], opipe[1]);
-			close(ipipe[0]);
-			close(ipipe[1]);
-			close(opipe[0]);
-			close(opipe[1]);
-			if (!ok)
-				return -1;
-		} else {
-			if (device_script(ptycommand, pty_master, pty_master, 1) < 0)
-				return -1;
-			ttyfd = pty_slave;
-			close(pty_master);
-			pty_master = -1;
-		}
-	} else if (pty_socket != NULL) {
-		int fd = open_socket(pty_socket);
-		if (fd < 0)
-			return -1;
-		if (!start_charshunt(fd, fd))
-			return -1;
-	} else if (notty) {
-		if (!start_charshunt(0, 1))
-			return -1;
-	} else if (record_file != NULL) {
-		if (!start_charshunt(ttyfd, ttyfd))
-			return -1;
-	}
-
-	/* run connection script */
-	if ((connector && connector[0]) || initializer) {
-		if (real_ttyfd != -1) {
-			/* XXX do this if doing_callback == CALLBACK_DIALIN? */
-			if (!default_device && modem) {
-				setdtr(real_ttyfd, 0);	/* in case modem is off hook */
-				sleep(1);
-				setdtr(real_ttyfd, 1);
-			}
-		}
-
-		if (initializer && initializer[0]) {
-			if (device_script(initializer, ttyfd, ttyfd, 0) < 0) {
-				error("Initializer script failed");
-				status = EXIT_INIT_FAILED;
-				return -1;
-			}
-			if (kill_link) {
-				disconnect_tty();
-				return -1;
-			}
-			info("Serial port initialized.");
-		}
-
-		if (connector && connector[0]) {
-			if (device_script(connector, ttyfd, ttyfd, 0) < 0) {
-				error("Connect script failed");
-				status = EXIT_CONNECT_FAILED;
-				return -1;
-			}
-			if (kill_link) {
-				disconnect_tty();
-				return -1;
-			}
-			info("Serial connection established.");
-		}
-
-		/* set line speed, flow control, etc.;
-		   clear CLOCAL if modem option */
-		if (real_ttyfd != -1)
-			set_up_tty(real_ttyfd, 0);
-
-		if (doing_callback == CALLBACK_DIALIN)
-			connector = NULL;
-	}
-
-	/* reopen tty if necessary to wait for carrier */
-	if (connector == NULL && modem && devnam[0] != 0) {
-		int i;
-		for (;;) {
-			if ((i = open(devnam, O_RDWR)) >= 0)
-				break;
-			if (errno != EINTR) {
-				error("Failed to reopen %s: %m", devnam);
-				status = EXIT_OPEN_FAILED;
-			}
-			if (!persist || errno != EINTR || hungup || kill_link)
-				return -1;
-		}
-		close(i);
-	}
-
-	slprintf(numbuf, sizeof(numbuf), "%d", baud_rate);
-	script_setenv("SPEED", numbuf, 0);
-
-	/* run welcome script, if any */
-	if (welcomer && welcomer[0]) {
-		if (device_script(welcomer, ttyfd, ttyfd, 0) < 0)
-			warn("Welcome script failed");
-	}
-
-	/*
-	 * If we are initiating this connection, wait for a short
-	 * time for something from the peer.  This can avoid bouncing
-	 * our packets off his tty before he has it set up.
-	 */
-	if (connector != NULL || ptycommand != NULL)
-		listen_time = connect_delay;
-
-	return ttyfd;
-}
-
-
-void disconnect_tty()
-{
-	if (disconnect_script == NULL || hungup)
-		return;
-	if (real_ttyfd >= 0)
-		set_up_tty(real_ttyfd, 1);
-	if (device_script(disconnect_script, ttyfd, ttyfd, 0) < 0) {
-		warn("disconnect script failed");
-	} else {
-		info("Serial link disconnected.");
-	}
-}
-
-void tty_close_fds()
-{
-	if (pty_master >= 0)
-		close(pty_master);
-	if (pty_slave >= 0)
-		close(pty_slave);
-	if (real_ttyfd >= 0) {
-		close(real_ttyfd);
-		real_ttyfd = -1;
-	}
-	/* N.B. ttyfd will == either pty_slave or real_ttyfd */
-}
-
-void cleanup_tty()
-{
-	if (real_ttyfd >= 0)
-		finish_tty();
-	tty_close_fds();
-	if (locked) {
-		unlock();
-		locked = 0;
-	}
-}
-
-/*
- * tty_do_send_config - set transmit-side PPP configuration.
- * We set the extended transmit ACCM here as well.
- */
-void
-tty_do_send_config(mtu, accm, pcomp, accomp)
-    int mtu;
-    u_int32_t accm;
-    int pcomp, accomp;
-{
-	tty_set_xaccm(xmit_accm);
-	tty_send_config(mtu, accm, pcomp, accomp);
-}
-
-/*
- * finish_tty - restore the terminal device to its original settings
- */
-static void
-finish_tty()
-{
-	/* drop dtr to hang up */
-	if (!default_device && modem) {
-		setdtr(real_ttyfd, 0);
-		/*
-		 * This sleep is in case the serial port has CLOCAL set by default,
-		 * and consequently will reassert DTR when we close the device.
-		 */
-		sleep(1);
-	}
-
-	restore_tty(real_ttyfd);
-
-	if (tty_mode != (mode_t) -1) {
-		if (fchmod(real_ttyfd, tty_mode) != 0) {
-			/* XXX if devnam is a symlink, this will change the link */
-			chmod(devnam, tty_mode);
-		}
-	}
-
-	close(real_ttyfd);
-	real_ttyfd = -1;
-}
-
-/*
- * maybe_relock - our PID has changed, maybe update the lock file.
- */
-static void
-maybe_relock(arg, pid)
-    void *arg;
-    int pid;
-{
-    if (locked)
-	relock(pid);
-}
-
-/*
- * open_socket - establish a stream socket connection to the nominated
- * host and port.
- */
-static int
-open_socket(dest)
-    char *dest;
-{
-    char *sep, *endp = NULL;
-    int sock, port = -1;
-    u_int32_t host;
-    struct hostent *hent;
-    struct sockaddr_in sad;
-
-    /* parse host:port and resolve host to an IP address */
-    sep = strchr(dest, ':');
-    if (sep != NULL)
-	port = strtol(sep+1, &endp, 10);
-    if (port < 0 || endp == sep+1 || sep == dest) {
-	error("Can't parse host:port for socket destination");
-	return -1;
-    }
-    *sep = 0;
-    host = inet_addr(dest);
-    if (host == (u_int32_t) -1) {
-	hent = gethostbyname(dest);
-	if (hent == NULL) {
-	    error("%s: unknown host in socket option", dest);
-	    *sep = ':';
-	    return -1;
-	}
-	host = *(u_int32_t *)(hent->h_addr_list[0]);
-    }
-    *sep = ':';
-
-    /* get a socket and connect it to the other end */
-    sock = socket(PF_INET, SOCK_STREAM, 0);
-    if (sock < 0) {
-	error("Can't create socket: %m");
-	return -1;
-    }
-    memset(&sad, 0, sizeof(sad));
-    sad.sin_family = AF_INET;
-    sad.sin_port = htons(port);
-    sad.sin_addr.s_addr = host;
-    if (connect(sock, (struct sockaddr *)&sad, sizeof(sad)) < 0) {
-	error("Can't connect to %s: %m", dest);
-	close(sock);
-	return -1;
-    }
-
-    return sock;
-}
-
-
-/*
- * start_charshunt - create a child process to run the character shunt.
- */
-static int
-start_charshunt(ifd, ofd)
-    int ifd, ofd;
-{
-    int cpid;
-
-    cpid = fork();
-    if (cpid == -1) {
-	error("Can't fork process for character shunt: %m");
-	return 0;
-    }
-    if (cpid == 0) {
-	/* child */
-	close(pty_slave);
-	setuid(uid);
-	if (getuid() != uid)
-	    fatal("setuid failed");
-	setgid(getgid());
-	if (!nodetach)
-	    log_to_fd = -1;
-	charshunt(ifd, ofd, record_file);
-	exit(0);
-    }
-    charshunt_pid = cpid;
-    add_notifier(&sigreceived, stop_charshunt, 0);
-    close(pty_master);
-    pty_master = -1;
-    ttyfd = pty_slave;
-    record_child(cpid, "pppd (charshunt)", charshunt_done, NULL);
-    return 1;
-}
-
-static void
-charshunt_done(arg)
-    void *arg;
-{
-	charshunt_pid = 0;
-}
-
-static void
-stop_charshunt(arg, sig)
-    void *arg;
-    int sig;
-{
-	if (charshunt_pid)
-		kill(charshunt_pid, (sig == SIGINT? sig: SIGTERM));
-}
-
-/*
- * charshunt - the character shunt, which passes characters between
- * the pty master side and the serial port (or stdin/stdout).
- * This runs as the user (not as root).
- * (We assume ofd >= ifd which is true the way this gets called. :-).
- */
-static void
-charshunt(ifd, ofd, record_file)
-    int ifd, ofd;
-    char *record_file;
-{
-    int n, nfds;
-    fd_set ready, writey;
-    u_char *ibufp, *obufp;
-    int nibuf, nobuf;
-    int flags;
-    int pty_readable, stdin_readable;
-    struct timeval lasttime;
-    FILE *recordf = NULL;
-    int ilevel, olevel, max_level;
-    struct timeval levelt, tout, *top;
-    extern u_char inpacket_buf[];
-
-    /*
-     * Reset signal handlers.
-     */
-    signal(SIGHUP, SIG_IGN);		/* Hangup */
-    signal(SIGINT, SIG_DFL);		/* Interrupt */
-    signal(SIGTERM, SIG_DFL);		/* Terminate */
-    signal(SIGCHLD, SIG_DFL);
-    signal(SIGUSR1, SIG_DFL);
-    signal(SIGUSR2, SIG_DFL);
-    signal(SIGABRT, SIG_DFL);
-    signal(SIGALRM, SIG_DFL);
-    signal(SIGFPE, SIG_DFL);
-    signal(SIGILL, SIG_DFL);
-    signal(SIGPIPE, SIG_DFL);
-    signal(SIGQUIT, SIG_DFL);
-    signal(SIGSEGV, SIG_DFL);
-#ifdef SIGBUS
-    signal(SIGBUS, SIG_DFL);
-#endif
-#ifdef SIGEMT
-    signal(SIGEMT, SIG_DFL);
-#endif
-#ifdef SIGPOLL
-    signal(SIGPOLL, SIG_DFL);
-#endif
-#ifdef SIGPROF
-    signal(SIGPROF, SIG_DFL);
-#endif
-#ifdef SIGSYS
-    signal(SIGSYS, SIG_DFL);
-#endif
-#ifdef SIGTRAP
-    signal(SIGTRAP, SIG_DFL);
-#endif
-#ifdef SIGVTALRM
-    signal(SIGVTALRM, SIG_DFL);
-#endif
-#ifdef SIGXCPU
-    signal(SIGXCPU, SIG_DFL);
-#endif
-#ifdef SIGXFSZ
-    signal(SIGXFSZ, SIG_DFL);
-#endif
-
-    /*
-     * Open the record file if required.
-     */
-    if (record_file != NULL) {
-	recordf = fopen(record_file, "a");
-	if (recordf == NULL)
-	    error("Couldn't create record file %s: %m", record_file);
-    }
-
-    /* set all the fds to non-blocking mode */
-    flags = fcntl(pty_master, F_GETFL);
-    if (flags == -1
-	|| fcntl(pty_master, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set pty master to nonblock: %m");
-    flags = fcntl(ifd, F_GETFL);
-    if (flags == -1
-	|| fcntl(ifd, F_SETFL, flags | O_NONBLOCK) == -1)
-	warn("couldn't set %s to nonblock: %m", (ifd==0? "stdin": "tty"));
-    if (ofd != ifd) {
-	flags = fcntl(ofd, F_GETFL);
-	if (flags == -1
-	    || fcntl(ofd, F_SETFL, flags | O_NONBLOCK) == -1)
-	    warn("couldn't set stdout to nonblock: %m");
-    }
-
-    nibuf = nobuf = 0;
-    ibufp = obufp = NULL;
-    pty_readable = stdin_readable = 1;
-
-    ilevel = olevel = 0;
-    gettimeofday(&levelt, NULL);
-    if (max_data_rate) {
-	max_level = max_data_rate / 10;
-	if (max_level < 100)
-	    max_level = 100;
-    } else
-	max_level = PPP_MRU + PPP_HDRLEN + 1;
-
-    nfds = (ofd > pty_master? ofd: pty_master) + 1;
-    if (recordf != NULL) {
-	gettimeofday(&lasttime, NULL);
-	putc(7, recordf);	/* put start marker */
-	putc(lasttime.tv_sec >> 24, recordf);
-	putc(lasttime.tv_sec >> 16, recordf);
-	putc(lasttime.tv_sec >> 8, recordf);
-	putc(lasttime.tv_sec, recordf);
-	lasttime.tv_usec = 0;
-    }
-
-    while (nibuf != 0 || nobuf != 0 || pty_readable || stdin_readable) {
-	top = 0;
-	tout.tv_sec = 0;
-	tout.tv_usec = 10000;
-	FD_ZERO(&ready);
-	FD_ZERO(&writey);
-	if (nibuf != 0) {
-	    if (ilevel >= max_level)
-		top = &tout;
-	    else
-		FD_SET(pty_master, &writey);
-	} else if (stdin_readable)
-	    FD_SET(ifd, &ready);
-	if (nobuf != 0) {
-	    if (olevel >= max_level)
-		top = &tout;
-	    else
-		FD_SET(ofd, &writey);
-	} else if (pty_readable)
-	    FD_SET(pty_master, &ready);
-	if (select(nfds, &ready, &writey, NULL, top) < 0) {
-	    if (errno != EINTR)
-		fatal("select");
-	    continue;
-	}
-	if (max_data_rate) {
-	    double dt;
-	    int nbt;
-	    struct timeval now;
-
-	    gettimeofday(&now, NULL);
-	    dt = (now.tv_sec - levelt.tv_sec
-		  + (now.tv_usec - levelt.tv_usec) / 1e6);
-	    nbt = (int)(dt * max_data_rate);
-	    ilevel = (nbt < 0 || nbt > ilevel)? 0: ilevel - nbt;
-	    olevel = (nbt < 0 || nbt > olevel)? 0: olevel - nbt;
-	    levelt = now;
-	} else
-	    ilevel = olevel = 0;
-	if (FD_ISSET(ifd, &ready)) {
-	    ibufp = inpacket_buf;
-	    nibuf = read(ifd, ibufp, PPP_MRU + PPP_HDRLEN);
-	    if (nibuf < 0 && errno == EIO)
-		nibuf = 0;
-	    if (nibuf < 0) {
-		if (!(errno == EINTR || errno == EAGAIN)) {
-		    error("Error reading standard input: %m");
-		    break;
-		}
-		nibuf = 0;
-	    } else if (nibuf == 0) {
-		/* end of file from stdin */
-		stdin_readable = 0;
-		/* do a 0-length write, hopefully this will generate
-		   an EOF (hangup) on the slave side. */
-		write(pty_master, inpacket_buf, 0);
-		if (recordf)
-		    if (!record_write(recordf, 4, NULL, 0, &lasttime))
-			recordf = NULL;
-	    } else {
-		FD_SET(pty_master, &writey);
-		if (recordf)
-		    if (!record_write(recordf, 2, ibufp, nibuf, &lasttime))
-			recordf = NULL;
-	    }
-	}
-	if (FD_ISSET(pty_master, &ready)) {
-	    obufp = outpacket_buf;
-	    nobuf = read(pty_master, obufp, PPP_MRU + PPP_HDRLEN);
-	    if (nobuf < 0 && errno == EIO)
-		nobuf = 0;
-	    if (nobuf < 0) {
-		if (!(errno == EINTR || errno == EAGAIN)) {
-		    error("Error reading pseudo-tty master: %m");
-		    break;
-		}
-		nobuf = 0;
-	    } else if (nobuf == 0) {
-		/* end of file from the pty - slave side has closed */
-		pty_readable = 0;
-		stdin_readable = 0;	/* pty is not writable now */
-		nibuf = 0;
-		close(ofd);
-		if (recordf)
-		    if (!record_write(recordf, 3, NULL, 0, &lasttime))
-			recordf = NULL;
-	    } else {
-		FD_SET(ofd, &writey);
-		if (recordf)
-		    if (!record_write(recordf, 1, obufp, nobuf, &lasttime))
-			recordf = NULL;
-	    }
-	}
-	if (FD_ISSET(ofd, &writey)) {
-	    n = nobuf;
-	    if (olevel + n > max_level)
-		n = max_level - olevel;
-	    n = write(ofd, obufp, n);
-	    if (n < 0) {
-		if (errno == EIO) {
-		    pty_readable = 0;
-		    nobuf = 0;
-		} else if (errno != EAGAIN && errno != EINTR) {
-		    error("Error writing standard output: %m");
-		    break;
-		}
-	    } else {
-		obufp += n;
-		nobuf -= n;
-		olevel += n;
-	    }
-	}
-	if (FD_ISSET(pty_master, &writey)) {
-	    n = nibuf;
-	    if (ilevel + n > max_level)
-		n = max_level - ilevel;
-	    n = write(pty_master, ibufp, n);
-	    if (n < 0) {
-		if (errno == EIO) {
-		    stdin_readable = 0;
-		    nibuf = 0;
-		} else if (errno != EAGAIN && errno != EINTR) {
-		    error("Error writing pseudo-tty master: %m");
-		    break;
-		}
-	    } else {
-		ibufp += n;
-		nibuf -= n;
-		ilevel += n;
-	    }
-	}
-    }
-    exit(0);
-}
-
-static int
-record_write(f, code, buf, nb, tp)
-    FILE *f;
-    int code;
-    u_char *buf;
-    int nb;
-    struct timeval *tp;
-{
-    struct timeval now;
-    int diff;
-
-    gettimeofday(&now, NULL);
-    now.tv_usec /= 100000;	/* actually 1/10 s, not usec now */
-    diff = (now.tv_sec - tp->tv_sec) * 10 + (now.tv_usec - tp->tv_usec);
-    if (diff > 0) {
-	if (diff > 255) {
-	    putc(5, f);
-	    putc(diff >> 24, f);
-	    putc(diff >> 16, f);
-	    putc(diff >> 8, f);
-	    putc(diff, f);
-	} else {
-	    putc(6, f);
-	    putc(diff, f);
-	}
-	*tp = now;
-    }
-    putc(code, f);
-    if (buf != NULL) {
-	putc(nb >> 8, f);
-	putc(nb, f);
-	fwrite(buf, nb, 1, f);
-    }
-    fflush(f);
-    if (ferror(f)) {
-	error("Error writing record file: %m");
-	return 0;
-    }
-    return 1;
-}
diff --git a/mdk-stage1/ppp/pppd/upap.c b/mdk-stage1/ppp/pppd/upap.c
deleted file mode 100644
index bd569fb74..000000000
--- a/mdk-stage1/ppp/pppd/upap.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * upap.c - User/Password Authentication Protocol.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-/*
- * TODO:
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#include "pppd.h"
-#include "upap.h"
-
-static const char rcsid[] = RCSID;
-
-static bool hide_password = 1;
-
-/*
- * Command-line options.
- */
-static option_t pap_option_list[] = {
-    { "hide-password", o_bool, &hide_password,
-      "Don't output passwords to log", OPT_PRIO | 1 },
-    { "show-password", o_bool, &hide_password,
-      "Show password string in debug log messages", OPT_PRIOSUB | 0 },
-
-    { "pap-restart", o_int, &upap[0].us_timeouttime,
-      "Set retransmit timeout for PAP", OPT_PRIO },
-    { "pap-max-authreq", o_int, &upap[0].us_maxtransmits,
-      "Set max number of transmissions for auth-reqs", OPT_PRIO },
-    { "pap-timeout", o_int, &upap[0].us_reqtimeout,
-      "Set time limit for peer PAP authentication", OPT_PRIO },
-
-    { NULL }
-};
-
-/*
- * Protocol entry points.
- */
-static void upap_init __P((int));
-static void upap_lowerup __P((int));
-static void upap_lowerdown __P((int));
-static void upap_input __P((int, u_char *, int));
-static void upap_protrej __P((int));
-static int  upap_printpkt __P((u_char *, int,
-			       void (*) __P((void *, char *, ...)), void *));
-
-struct protent pap_protent = {
-    PPP_PAP,
-    upap_init,
-    upap_input,
-    upap_protrej,
-    upap_lowerup,
-    upap_lowerdown,
-    NULL,
-    NULL,
-    upap_printpkt,
-    NULL,
-    1,
-    "PAP",
-    NULL,
-    pap_option_list,
-    NULL,
-    NULL,
-    NULL
-};
-
-upap_state upap[NUM_PPP];		/* UPAP state; one for each unit */
-
-static void upap_timeout __P((void *));
-static void upap_reqtimeout __P((void *));
-static void upap_rauthreq __P((upap_state *, u_char *, int, int));
-static void upap_rauthack __P((upap_state *, u_char *, int, int));
-static void upap_rauthnak __P((upap_state *, u_char *, int, int));
-static void upap_sauthreq __P((upap_state *));
-static void upap_sresp __P((upap_state *, int, int, char *, int));
-
-
-/*
- * upap_init - Initialize a UPAP unit.
- */
-static void
-upap_init(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    u->us_unit = unit;
-    u->us_user = NULL;
-    u->us_userlen = 0;
-    u->us_passwd = NULL;
-    u->us_passwdlen = 0;
-    u->us_clientstate = UPAPCS_INITIAL;
-    u->us_serverstate = UPAPSS_INITIAL;
-    u->us_id = 0;
-    u->us_timeouttime = UPAP_DEFTIMEOUT;
-    u->us_maxtransmits = 10;
-    u->us_reqtimeout = UPAP_DEFREQTIME;
-}
-
-
-/*
- * upap_authwithpeer - Authenticate us with our peer (start client).
- *
- * Set new state and send authenticate's.
- */
-void
-upap_authwithpeer(unit, user, password)
-    int unit;
-    char *user, *password;
-{
-    upap_state *u = &upap[unit];
-
-    /* Save the username and password we're given */
-    u->us_user = user;
-    u->us_userlen = strlen(user);
-    u->us_passwd = password;
-    u->us_passwdlen = strlen(password);
-    u->us_transmits = 0;
-
-    /* Lower layer up yet? */
-    if (u->us_clientstate == UPAPCS_INITIAL ||
-	u->us_clientstate == UPAPCS_PENDING) {
-	u->us_clientstate = UPAPCS_PENDING;
-	return;
-    }
-
-    upap_sauthreq(u);			/* Start protocol */
-}
-
-
-/*
- * upap_authpeer - Authenticate our peer (start server).
- *
- * Set new state.
- */
-void
-upap_authpeer(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    /* Lower layer up yet? */
-    if (u->us_serverstate == UPAPSS_INITIAL ||
-	u->us_serverstate == UPAPSS_PENDING) {
-	u->us_serverstate = UPAPSS_PENDING;
-	return;
-    }
-
-    u->us_serverstate = UPAPSS_LISTEN;
-    if (u->us_reqtimeout > 0)
-	TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);
-}
-
-
-/*
- * upap_timeout - Retransmission timer for sending auth-reqs expired.
- */
-static void
-upap_timeout(arg)
-    void *arg;
-{
-    upap_state *u = (upap_state *) arg;
-
-    if (u->us_clientstate != UPAPCS_AUTHREQ)
-	return;
-
-    if (u->us_transmits >= u->us_maxtransmits) {
-	/* give up in disgust */
-	error("No response to PAP authenticate-requests");
-	u->us_clientstate = UPAPCS_BADAUTH;
-	auth_withpeer_fail(u->us_unit, PPP_PAP);
-	return;
-    }
-
-    upap_sauthreq(u);		/* Send Authenticate-Request */
-}
-
-
-/*
- * upap_reqtimeout - Give up waiting for the peer to send an auth-req.
- */
-static void
-upap_reqtimeout(arg)
-    void *arg;
-{
-    upap_state *u = (upap_state *) arg;
-
-    if (u->us_serverstate != UPAPSS_LISTEN)
-	return;			/* huh?? */
-
-    auth_peer_fail(u->us_unit, PPP_PAP);
-    u->us_serverstate = UPAPSS_BADAUTH;
-}
-
-
-/*
- * upap_lowerup - The lower layer is up.
- *
- * Start authenticating if pending.
- */
-static void
-upap_lowerup(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    if (u->us_clientstate == UPAPCS_INITIAL)
-	u->us_clientstate = UPAPCS_CLOSED;
-    else if (u->us_clientstate == UPAPCS_PENDING) {
-	upap_sauthreq(u);	/* send an auth-request */
-    }
-
-    if (u->us_serverstate == UPAPSS_INITIAL)
-	u->us_serverstate = UPAPSS_CLOSED;
-    else if (u->us_serverstate == UPAPSS_PENDING) {
-	u->us_serverstate = UPAPSS_LISTEN;
-	if (u->us_reqtimeout > 0)
-	    TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);
-    }
-}
-
-
-/*
- * upap_lowerdown - The lower layer is down.
- *
- * Cancel all timeouts.
- */
-static void
-upap_lowerdown(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    if (u->us_clientstate == UPAPCS_AUTHREQ)	/* Timeout pending? */
-	UNTIMEOUT(upap_timeout, u);		/* Cancel timeout */
-    if (u->us_serverstate == UPAPSS_LISTEN && u->us_reqtimeout > 0)
-	UNTIMEOUT(upap_reqtimeout, u);
-
-    u->us_clientstate = UPAPCS_INITIAL;
-    u->us_serverstate = UPAPSS_INITIAL;
-}
-
-
-/*
- * upap_protrej - Peer doesn't speak this protocol.
- *
- * This shouldn't happen.  In any case, pretend lower layer went down.
- */
-static void
-upap_protrej(unit)
-    int unit;
-{
-    upap_state *u = &upap[unit];
-
-    if (u->us_clientstate == UPAPCS_AUTHREQ) {
-	error("PAP authentication failed due to protocol-reject");
-	auth_withpeer_fail(unit, PPP_PAP);
-    }
-    if (u->us_serverstate == UPAPSS_LISTEN) {
-	error("PAP authentication of peer failed (protocol-reject)");
-	auth_peer_fail(unit, PPP_PAP);
-    }
-    upap_lowerdown(unit);
-}
-
-
-/*
- * upap_input - Input UPAP packet.
- */
-static void
-upap_input(unit, inpacket, l)
-    int unit;
-    u_char *inpacket;
-    int l;
-{
-    upap_state *u = &upap[unit];
-    u_char *inp;
-    u_char code, id;
-    int len;
-
-    /*
-     * Parse header (code, id and length).
-     * If packet too short, drop it.
-     */
-    inp = inpacket;
-    if (l < UPAP_HEADERLEN) {
-	UPAPDEBUG(("pap_input: rcvd short header."));
-	return;
-    }
-    GETCHAR(code, inp);
-    GETCHAR(id, inp);
-    GETSHORT(len, inp);
-    if (len < UPAP_HEADERLEN) {
-	UPAPDEBUG(("pap_input: rcvd illegal length."));
-	return;
-    }
-    if (len > l) {
-	UPAPDEBUG(("pap_input: rcvd short packet."));
-	return;
-    }
-    len -= UPAP_HEADERLEN;
-
-    /*
-     * Action depends on code.
-     */
-    switch (code) {
-    case UPAP_AUTHREQ:
-	upap_rauthreq(u, inp, id, len);
-	break;
-
-    case UPAP_AUTHACK:
-	upap_rauthack(u, inp, id, len);
-	break;
-
-    case UPAP_AUTHNAK:
-	upap_rauthnak(u, inp, id, len);
-	break;
-
-    default:				/* XXX Need code reject */
-	break;
-    }
-}
-
-
-/*
- * upap_rauth - Receive Authenticate.
- */
-static void
-upap_rauthreq(u, inp, id, len)
-    upap_state *u;
-    u_char *inp;
-    int id;
-    int len;
-{
-    u_char ruserlen, rpasswdlen;
-    char *ruser, *rpasswd;
-    int retcode;
-    char *msg;
-    int msglen;
-
-    if (u->us_serverstate < UPAPSS_LISTEN)
-	return;
-
-    /*
-     * If we receive a duplicate authenticate-request, we are
-     * supposed to return the same status as for the first request.
-     */
-    if (u->us_serverstate == UPAPSS_OPEN) {
-	upap_sresp(u, UPAP_AUTHACK, id, "", 0);	/* return auth-ack */
-	return;
-    }
-    if (u->us_serverstate == UPAPSS_BADAUTH) {
-	upap_sresp(u, UPAP_AUTHNAK, id, "", 0);	/* return auth-nak */
-	return;
-    }
-
-    /*
-     * Parse user/passwd.
-     */
-    if (len < 1) {
-	UPAPDEBUG(("pap_rauth: rcvd short packet."));
-	return;
-    }
-    GETCHAR(ruserlen, inp);
-    len -= sizeof (u_char) + ruserlen + sizeof (u_char);
-    if (len < 0) {
-	UPAPDEBUG(("pap_rauth: rcvd short packet."));
-	return;
-    }
-    ruser = (char *) inp;
-    INCPTR(ruserlen, inp);
-    GETCHAR(rpasswdlen, inp);
-    if (len < rpasswdlen) {
-	UPAPDEBUG(("pap_rauth: rcvd short packet."));
-	return;
-    }
-    rpasswd = (char *) inp;
-
-    /*
-     * Check the username and password given.
-     */
-    retcode = check_passwd(u->us_unit, ruser, ruserlen, rpasswd,
-			   rpasswdlen, &msg);
-    BZERO(rpasswd, rpasswdlen);
-    msglen = strlen(msg);
-    if (msglen > 255)
-	msglen = 255;
-
-    upap_sresp(u, retcode, id, msg, msglen);
-
-    if (retcode == UPAP_AUTHACK) {
-	u->us_serverstate = UPAPSS_OPEN;
-	auth_peer_success(u->us_unit, PPP_PAP, ruser, ruserlen);
-    } else {
-	u->us_serverstate = UPAPSS_BADAUTH;
-	auth_peer_fail(u->us_unit, PPP_PAP);
-    }
-
-    if (u->us_reqtimeout > 0)
-	UNTIMEOUT(upap_reqtimeout, u);
-}
-
-
-/*
- * upap_rauthack - Receive Authenticate-Ack.
- */
-static void
-upap_rauthack(u, inp, id, len)
-    upap_state *u;
-    u_char *inp;
-    int id;
-    int len;
-{
-    u_char msglen;
-    char *msg;
-
-    if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */
-	return;
-
-    /*
-     * Parse message.
-     */
-    if (len < 1) {
-	UPAPDEBUG(("pap_rauthack: ignoring missing msg-length."));
-    } else {
-	GETCHAR(msglen, inp);
-	if (msglen > 0) {
-	    len -= sizeof (u_char);
-	    if (len < msglen) {
-		UPAPDEBUG(("pap_rauthack: rcvd short packet."));
-		return;
-	    }
-	    msg = (char *) inp;
-	    PRINTMSG(msg, msglen);
-	}
-    }
-
-    u->us_clientstate = UPAPCS_OPEN;
-
-    auth_withpeer_success(u->us_unit, PPP_PAP);
-}
-
-
-/*
- * upap_rauthnak - Receive Authenticate-Nakk.
- */
-static void
-upap_rauthnak(u, inp, id, len)
-    upap_state *u;
-    u_char *inp;
-    int id;
-    int len;
-{
-    u_char msglen;
-    char *msg;
-
-    if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */
-	return;
-
-    /*
-     * Parse message.
-     */
-    if (len < 1) {
-	UPAPDEBUG(("pap_rauthnak: ignoring missing msg-length."));
-    } else {
-	GETCHAR(msglen, inp);
-	if (msglen > 0) {
-	    len -= sizeof (u_char);
-	    if (len < msglen) {
-		UPAPDEBUG(("pap_rauthnak: rcvd short packet."));
-		return;
-	    }
-	    msg = (char *) inp;
-	    PRINTMSG(msg, msglen);
-	}
-    }
-
-    u->us_clientstate = UPAPCS_BADAUTH;
-
-    error("PAP authentication failed");
-    auth_withpeer_fail(u->us_unit, PPP_PAP);
-}
-
-
-/*
- * upap_sauthreq - Send an Authenticate-Request.
- */
-static void
-upap_sauthreq(u)
-    upap_state *u;
-{
-    u_char *outp;
-    int outlen;
-
-    outlen = UPAP_HEADERLEN + 2 * sizeof (u_char) +
-	u->us_userlen + u->us_passwdlen;
-    outp = outpacket_buf;
-    
-    MAKEHEADER(outp, PPP_PAP);
-
-    PUTCHAR(UPAP_AUTHREQ, outp);
-    PUTCHAR(++u->us_id, outp);
-    PUTSHORT(outlen, outp);
-    PUTCHAR(u->us_userlen, outp);
-    BCOPY(u->us_user, outp, u->us_userlen);
-    INCPTR(u->us_userlen, outp);
-    PUTCHAR(u->us_passwdlen, outp);
-    BCOPY(u->us_passwd, outp, u->us_passwdlen);
-
-    output(u->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-
-    TIMEOUT(upap_timeout, u, u->us_timeouttime);
-    ++u->us_transmits;
-    u->us_clientstate = UPAPCS_AUTHREQ;
-}
-
-
-/*
- * upap_sresp - Send a response (ack or nak).
- */
-static void
-upap_sresp(u, code, id, msg, msglen)
-    upap_state *u;
-    u_char code, id;
-    char *msg;
-    int msglen;
-{
-    u_char *outp;
-    int outlen;
-
-    outlen = UPAP_HEADERLEN + sizeof (u_char) + msglen;
-    outp = outpacket_buf;
-    MAKEHEADER(outp, PPP_PAP);
-
-    PUTCHAR(code, outp);
-    PUTCHAR(id, outp);
-    PUTSHORT(outlen, outp);
-    PUTCHAR(msglen, outp);
-    BCOPY(msg, outp, msglen);
-    output(u->us_unit, outpacket_buf, outlen + PPP_HDRLEN);
-}
-
-/*
- * upap_printpkt - print the contents of a PAP packet.
- */
-static char *upap_codenames[] = {
-    "AuthReq", "AuthAck", "AuthNak"
-};
-
-static int
-upap_printpkt(p, plen, printer, arg)
-    u_char *p;
-    int plen;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int code, id, len;
-    int mlen, ulen, wlen;
-    char *user, *pwd, *msg;
-    u_char *pstart;
-
-    if (plen < UPAP_HEADERLEN)
-	return 0;
-    pstart = p;
-    GETCHAR(code, p);
-    GETCHAR(id, p);
-    GETSHORT(len, p);
-    if (len < UPAP_HEADERLEN || len > plen)
-	return 0;
-
-    if (code >= 1 && code <= sizeof(upap_codenames) / sizeof(char *))
-	printer(arg, " %s", upap_codenames[code-1]);
-    else
-	printer(arg, " code=0x%x", code);
-    printer(arg, " id=0x%x", id);
-    len -= UPAP_HEADERLEN;
-    switch (code) {
-    case UPAP_AUTHREQ:
-	if (len < 1)
-	    break;
-	ulen = p[0];
-	if (len < ulen + 2)
-	    break;
-	wlen = p[ulen + 1];
-	if (len < ulen + wlen + 2)
-	    break;
-	user = (char *) (p + 1);
-	pwd = (char *) (p + ulen + 2);
-	p += ulen + wlen + 2;
-	len -= ulen + wlen + 2;
-	printer(arg, " user=");
-	print_string(user, ulen, printer, arg);
-	printer(arg, " password=");
-	if (!hide_password)
-	    print_string(pwd, wlen, printer, arg);
-	else
-	    printer(arg, "<hidden>");
-	break;
-    case UPAP_AUTHACK:
-    case UPAP_AUTHNAK:
-	if (len < 1)
-	    break;
-	mlen = p[0];
-	if (len < mlen + 1)
-	    break;
-	msg = (char *) (p + 1);
-	p += mlen + 1;
-	len -= mlen + 1;
-	printer(arg, " ");
-	print_string(msg, mlen, printer, arg);
-	break;
-    }
-
-    /* print the rest of the bytes in the packet */
-    for (; len > 0; --len) {
-	GETCHAR(code, p);
-	printer(arg, " %.2x", code);
-    }
-
-    return p - pstart;
-}
diff --git a/mdk-stage1/ppp/pppd/upap.h b/mdk-stage1/ppp/pppd/upap.h
deleted file mode 100644
index 42d6f4f0f..000000000
--- a/mdk-stage1/ppp/pppd/upap.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * upap.h - User/Password Authentication Protocol definitions.
- *
- * Copyright (c) 1989 Carnegie Mellon University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by Carnegie Mellon University.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- * $Id$
- */
-
-/*
- * Packet header = Code, id, length.
- */
-#define UPAP_HEADERLEN	4
-
-
-/*
- * UPAP codes.
- */
-#define UPAP_AUTHREQ	1	/* Authenticate-Request */
-#define UPAP_AUTHACK	2	/* Authenticate-Ack */
-#define UPAP_AUTHNAK	3	/* Authenticate-Nak */
-
-
-/*
- * Each interface is described by upap structure.
- */
-typedef struct upap_state {
-    int us_unit;		/* Interface unit number */
-    char *us_user;		/* User */
-    int us_userlen;		/* User length */
-    char *us_passwd;		/* Password */
-    int us_passwdlen;		/* Password length */
-    int us_clientstate;		/* Client state */
-    int us_serverstate;		/* Server state */
-    u_char us_id;		/* Current id */
-    int us_timeouttime;		/* Timeout (seconds) for auth-req retrans. */
-    int us_transmits;		/* Number of auth-reqs sent */
-    int us_maxtransmits;	/* Maximum number of auth-reqs to send */
-    int us_reqtimeout;		/* Time to wait for auth-req from peer */
-} upap_state;
-
-
-/*
- * Client states.
- */
-#define UPAPCS_INITIAL	0	/* Connection down */
-#define UPAPCS_CLOSED	1	/* Connection up, haven't requested auth */
-#define UPAPCS_PENDING	2	/* Connection down, have requested auth */
-#define UPAPCS_AUTHREQ	3	/* We've sent an Authenticate-Request */
-#define UPAPCS_OPEN	4	/* We've received an Ack */
-#define UPAPCS_BADAUTH	5	/* We've received a Nak */
-
-/*
- * Server states.
- */
-#define UPAPSS_INITIAL	0	/* Connection down */
-#define UPAPSS_CLOSED	1	/* Connection up, haven't requested auth */
-#define UPAPSS_PENDING	2	/* Connection down, have requested auth */
-#define UPAPSS_LISTEN	3	/* Listening for an Authenticate */
-#define UPAPSS_OPEN	4	/* We've sent an Ack */
-#define UPAPSS_BADAUTH	5	/* We've sent a Nak */
-
-
-/*
- * Timeouts.
- */
-#define UPAP_DEFTIMEOUT	3	/* Timeout (seconds) for retransmitting req */
-#define UPAP_DEFREQTIME	30	/* Time to wait for auth-req from peer */
-
-extern upap_state upap[];
-
-void upap_authwithpeer __P((int, char *, char *));
-void upap_authpeer __P((int));
-
-extern struct protent pap_protent;
diff --git a/mdk-stage1/ppp/pppd/utils.c b/mdk-stage1/ppp/pppd/utils.c
deleted file mode 100644
index 5861d8980..000000000
--- a/mdk-stage1/ppp/pppd/utils.c
+++ /dev/null
@@ -1,949 +0,0 @@
-/*
- * utils.c - various utility functions used in pppd.
- *
- * Copyright (c) 1999 The Australian National University.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the Australian National University.  The name of the University
- * may not be used to endorse or promote products derived from this
- * software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#define RCSID	"$Id$"
-
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <syslog.h>
-#include <netdb.h>
-#include <utmp.h>
-#include <pwd.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/socket.h>
-#include <netinet/in.h>
-#ifdef SVR4
-#include <sys/mkdev.h>
-#endif
-
-#include "pppd.h"
-#include <time.h>
-
-static const char rcsid[] = RCSID;
-
-#if defined(SUNOS4)
-extern char *strerror();
-#endif
-
-static void logit __P((int, char *, va_list));
-static void log_write __P((int, char *));
-static void vslp_printer __P((void *, char *, ...));
-static void format_packet __P((u_char *, int, void (*) (void *, char *, ...),
-			       void *));
-
-struct buffer_info {
-    char *ptr;
-    int len;
-};
-
-/*
- * strlcpy - like strcpy/strncpy, doesn't overflow destination buffer,
- * always leaves destination null-terminated (for len > 0).
- */
-size_t
-strlcpy(dest, src, len)
-    char *dest;
-    const char *src;
-    size_t len;
-{
-    size_t ret = strlen(src);
-
-    if (len != 0) {
-	if (ret < len)
-	    strcpy(dest, src);
-	else {
-	    strncpy(dest, src, len - 1);
-	    dest[len-1] = 0;
-	}
-    }
-    return ret;
-}
-
-/*
- * strlcat - like strcat/strncat, doesn't overflow destination buffer,
- * always leaves destination null-terminated (for len > 0).
- */
-size_t
-strlcat(dest, src, len)
-    char *dest;
-    const char *src;
-    size_t len;
-{
-    size_t dlen = strlen(dest);
-
-    return dlen + strlcpy(dest + dlen, src, (len > dlen? len - dlen: 0));
-}
-
-
-/*
- * slprintf - format a message into a buffer.  Like sprintf except we
- * also specify the length of the output buffer, and we handle
- * %r (recursive format), %m (error message), %v (visible string),
- * %q (quoted string), %t (current time) and %I (IP address) formats.
- * Doesn't do floating-point formats.
- * Returns the number of chars put into buf.
- */
-int
-slprintf __V((char *buf, int buflen, char *fmt, ...))
-{
-    va_list args;
-    int n;
-
-#if defined(__STDC__)
-    va_start(args, fmt);
-#else
-    char *buf;
-    int buflen;
-    char *fmt;
-    va_start(args);
-    buf = va_arg(args, char *);
-    buflen = va_arg(args, int);
-    fmt = va_arg(args, char *);
-#endif
-    n = vslprintf(buf, buflen, fmt, args);
-    va_end(args);
-    return n;
-}
-
-/*
- * vslprintf - like slprintf, takes a va_list instead of a list of args.
- */
-#define OUTCHAR(c)	(buflen > 0? (--buflen, *buf++ = (c)): 0)
-
-int
-vslprintf(buf, buflen, fmt, args)
-    char *buf;
-    int buflen;
-    char *fmt;
-    va_list args;
-{
-    int c, i, n;
-    int width, prec, fillch;
-    int base, len, neg, quoted;
-    unsigned long val = 0;
-    char *str, *f, *buf0;
-    unsigned char *p;
-    char num[32];
-    time_t t;
-    u_int32_t ip;
-    static char hexchars[] = "0123456789abcdef";
-    struct buffer_info bufinfo;
-
-    buf0 = buf;
-    --buflen;
-    while (buflen > 0) {
-	for (f = fmt; *f != '%' && *f != 0; ++f)
-	    ;
-	if (f > fmt) {
-	    len = f - fmt;
-	    if (len > buflen)
-		len = buflen;
-	    memcpy(buf, fmt, len);
-	    buf += len;
-	    buflen -= len;
-	    fmt = f;
-	}
-	if (*fmt == 0)
-	    break;
-	c = *++fmt;
-	width = 0;
-	prec = -1;
-	fillch = ' ';
-	if (c == '0') {
-	    fillch = '0';
-	    c = *++fmt;
-	}
-	if (c == '*') {
-	    width = va_arg(args, int);
-	    c = *++fmt;
-	} else {
-	    while (isdigit(c)) {
-		width = width * 10 + c - '0';
-		c = *++fmt;
-	    }
-	}
-	if (c == '.') {
-	    c = *++fmt;
-	    if (c == '*') {
-		prec = va_arg(args, int);
-		c = *++fmt;
-	    } else {
-		prec = 0;
-		while (isdigit(c)) {
-		    prec = prec * 10 + c - '0';
-		    c = *++fmt;
-		}
-	    }
-	}
-	str = 0;
-	base = 0;
-	neg = 0;
-	++fmt;
-	switch (c) {
-	case 'd':
-	    i = va_arg(args, int);
-	    if (i < 0) {
-		neg = 1;
-		val = -i;
-	    } else
-		val = i;
-	    base = 10;
-	    break;
-	case 'u':
-	    val = va_arg(args, unsigned int);
-	    base = 10;
-	    break;
-	case 'o':
-	    val = va_arg(args, unsigned int);
-	    base = 8;
-	    break;
-	case 'x':
-	case 'X':
-	    val = va_arg(args, unsigned int);
-	    base = 16;
-	    break;
-	case 'p':
-	    val = (unsigned long) va_arg(args, void *);
-	    base = 16;
-	    neg = 2;
-	    break;
-	case 's':
-	    str = va_arg(args, char *);
-	    break;
-	case 'c':
-	    num[0] = va_arg(args, int);
-	    num[1] = 0;
-	    str = num;
-	    break;
-	case 'm':
-	    str = strerror(errno);
-	    break;
-	case 'I':
-	    ip = va_arg(args, u_int32_t);
-	    ip = ntohl(ip);
-	    slprintf(num, sizeof(num), "%d.%d.%d.%d", (ip >> 24) & 0xff,
-		     (ip >> 16) & 0xff, (ip >> 8) & 0xff, ip & 0xff);
-	    str = num;
-	    break;
-	case 'r':
-	    f = va_arg(args, char *);
-#if !defined(__powerpc__) && !defined(__x86_64__)
-	    n = vslprintf(buf, buflen + 1, f, va_arg(args, va_list));
-#else
-	    /* On the powerpc, a va_list is an array of 1 structure */
-	    n = vslprintf(buf, buflen + 1, f, va_arg(args, void *));
-#endif
-	    buf += n;
-	    buflen -= n;
-	    continue;
-	case 't':
-	    time(&t);
-	    str = ctime(&t);
-	    str += 4;		/* chop off the day name */
-	    str[15] = 0;	/* chop off year and newline */
-	    break;
-	case 'v':		/* "visible" string */
-	case 'q':		/* quoted string */
-	    quoted = c == 'q';
-	    p = va_arg(args, unsigned char *);
-	    if (fillch == '0' && prec >= 0) {
-		n = prec;
-	    } else {
-		n = strlen((char *)p);
-		if (prec >= 0 && n > prec)
-		    n = prec;
-	    }
-	    while (n > 0 && buflen > 0) {
-		c = *p++;
-		--n;
-		if (!quoted && c >= 0x80) {
-		    OUTCHAR('M');
-		    OUTCHAR('-');
-		    c -= 0x80;
-		}
-		if (quoted && (c == '"' || c == '\\'))
-		    OUTCHAR('\\');
-		if (c < 0x20 || (0x7f <= c && c < 0xa0)) {
-		    if (quoted) {
-			OUTCHAR('\\');
-			switch (c) {
-			case '\t':	OUTCHAR('t');	break;
-			case '\n':	OUTCHAR('n');	break;
-			case '\b':	OUTCHAR('b');	break;
-			case '\f':	OUTCHAR('f');	break;
-			default:
-			    OUTCHAR('x');
-			    OUTCHAR(hexchars[c >> 4]);
-			    OUTCHAR(hexchars[c & 0xf]);
-			}
-		    } else {
-			if (c == '\t')
-			    OUTCHAR(c);
-			else {
-			    OUTCHAR('^');
-			    OUTCHAR(c ^ 0x40);
-			}
-		    }
-		} else
-		    OUTCHAR(c);
-	    }
-	    continue;
-	case 'P':		/* print PPP packet */
-	    bufinfo.ptr = buf;
-	    bufinfo.len = buflen + 1;
-	    p = va_arg(args, unsigned char *);
-	    n = va_arg(args, int);
-	    format_packet(p, n, vslp_printer, &bufinfo);
-	    buf = bufinfo.ptr;
-	    buflen = bufinfo.len - 1;
-	    continue;
-	case 'B':
-	    p = va_arg(args, unsigned char *);
-	    for (n = prec; n > 0; --n) {
-		c = *p++;
-		if (fillch == ' ')
-		    OUTCHAR(' ');
-		OUTCHAR(hexchars[(c >> 4) & 0xf]);
-		OUTCHAR(hexchars[c & 0xf]);
-	    }
-	    continue;
-	default:
-	    *buf++ = '%';
-	    if (c != '%')
-		--fmt;		/* so %z outputs %z etc. */
-	    --buflen;
-	    continue;
-	}
-	if (base != 0) {
-	    str = num + sizeof(num);
-	    *--str = 0;
-	    while (str > num + neg) {
-		*--str = hexchars[val % base];
-		val = val / base;
-		if (--prec <= 0 && val == 0)
-		    break;
-	    }
-	    switch (neg) {
-	    case 1:
-		*--str = '-';
-		break;
-	    case 2:
-		*--str = 'x';
-		*--str = '0';
-		break;
-	    }
-	    len = num + sizeof(num) - 1 - str;
-	} else {
-	    len = strlen(str);
-	    if (prec >= 0 && len > prec)
-		len = prec;
-	}
-	if (width > 0) {
-	    if (width > buflen)
-		width = buflen;
-	    if ((n = width - len) > 0) {
-		buflen -= n;
-		for (; n > 0; --n)
-		    *buf++ = fillch;
-	    }
-	}
-	if (len > buflen)
-	    len = buflen;
-	memcpy(buf, str, len);
-	buf += len;
-	buflen -= len;
-    }
-    *buf = 0;
-    return buf - buf0;
-}
-
-/*
- * vslp_printer - used in processing a %P format
- */
-static void
-vslp_printer __V((void *arg, char *fmt, ...))
-{
-    int n;
-    va_list pvar;
-    struct buffer_info *bi;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    void *arg;
-    char *fmt;
-    va_start(pvar);
-    arg = va_arg(pvar, void *);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    bi = (struct buffer_info *) arg;
-    n = vslprintf(bi->ptr, bi->len, fmt, pvar);
-    va_end(pvar);
-
-    bi->ptr += n;
-    bi->len -= n;
-}
-
-#ifdef unused
-/*
- * log_packet - format a packet and log it.
- */
-
-void
-log_packet(p, len, prefix, level)
-    u_char *p;
-    int len;
-    char *prefix;
-    int level;
-{
-	init_pr_log(prefix, level);
-	format_packet(p, len, pr_log, &level);
-	end_pr_log();
-}
-#endif /* unused */
-
-/*
- * format_packet - make a readable representation of a packet,
- * calling `printer(arg, format, ...)' to output it.
- */
-static void
-format_packet(p, len, printer, arg)
-    u_char *p;
-    int len;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int i, n;
-    u_short proto;
-    struct protent *protp;
-
-    if (len >= PPP_HDRLEN && p[0] == PPP_ALLSTATIONS && p[1] == PPP_UI) {
-	p += 2;
-	GETSHORT(proto, p);
-	len -= PPP_HDRLEN;
-	for (i = 0; (protp = protocols[i]) != NULL; ++i)
-	    if (proto == protp->protocol)
-		break;
-	if (protp != NULL) {
-	    printer(arg, "[%s", protp->name);
-	    n = (*protp->printpkt)(p, len, printer, arg);
-	    printer(arg, "]");
-	    p += n;
-	    len -= n;
-	} else {
-	    for (i = 0; (protp = protocols[i]) != NULL; ++i)
-		if (proto == (protp->protocol & ~0x8000))
-		    break;
-	    if (protp != 0 && protp->data_name != 0) {
-		printer(arg, "[%s data]", protp->data_name);
-		if (len > 8)
-		    printer(arg, "%.8B ...", p);
-		else
-		    printer(arg, "%.*B", len, p);
-		len = 0;
-	    } else
-		printer(arg, "[proto=0x%x]", proto);
-	}
-    }
-
-    if (len > 32)
-	printer(arg, "%.32B ...", p);
-    else
-	printer(arg, "%.*B", len, p);
-}
-
-/*
- * init_pr_log, end_pr_log - initialize and finish use of pr_log.
- */
-
-static char line[256];		/* line to be logged accumulated here */
-static char *linep;		/* current pointer within line */
-static int llevel;		/* level for logging */
-
-void
-init_pr_log(prefix, level)
-     char *prefix;
-     int level;
-{
-	linep = line;
-	if (prefix != NULL) {
-		strlcpy(line, prefix, sizeof(line));
-		linep = line + strlen(line);
-	}
-	llevel = level;
-}
-
-void
-end_pr_log()
-{
-	if (linep != line) {
-		*linep = 0;
-		log_write(llevel, line);
-	}
-}
-
-/*
- * pr_log - printer routine for outputting to syslog
- */
-void
-pr_log __V((void *arg, char *fmt, ...))
-{
-	int l, n;
-	va_list pvar;
-	char *p, *eol;
-	char buf[256];
-
-#if defined(__STDC__)
-	va_start(pvar, fmt);
-#else
-	void *arg;
-	char *fmt;
-	va_start(pvar);
-	arg = va_arg(pvar, void *);
-	fmt = va_arg(pvar, char *);
-#endif
-
-	n = vslprintf(buf, sizeof(buf), fmt, pvar);
-	va_end(pvar);
-
-	p = buf;
-	eol = strchr(buf, '\n');
-	if (linep != line) {
-		l = (eol == NULL)? n: eol - buf;
-		if (linep + l < line + sizeof(line)) {
-			if (l > 0) {
-				memcpy(linep, buf, l);
-				linep += l;
-			}
-			if (eol == NULL)
-				return;
-			p = eol + 1;
-			eol = strchr(p, '\n');
-		}
-		*linep = 0;
-		log_write(llevel, line);
-		linep = line;
-	}
-
-	while (eol != NULL) {
-		*eol = 0;
-		log_write(llevel, p);
-		p = eol + 1;
-		eol = strchr(p, '\n');
-	}
-
-	/* assumes sizeof(buf) <= sizeof(line) */
-	l = buf + n - p;
-	if (l > 0) {
-		memcpy(line, p, n);
-		linep = line + l;
-	}
-}
-
-/*
- * print_string - print a readable representation of a string using
- * printer.
- */
-void
-print_string(p, len, printer, arg)
-    char *p;
-    int len;
-    void (*printer) __P((void *, char *, ...));
-    void *arg;
-{
-    int c;
-
-    printer(arg, "\"");
-    for (; len > 0; --len) {
-	c = *p++;
-	if (' ' <= c && c <= '~') {
-	    if (c == '\\' || c == '"')
-		printer(arg, "\\");
-	    printer(arg, "%c", c);
-	} else {
-	    switch (c) {
-	    case '\n':
-		printer(arg, "\\n");
-		break;
-	    case '\r':
-		printer(arg, "\\r");
-		break;
-	    case '\t':
-		printer(arg, "\\t");
-		break;
-	    default:
-		printer(arg, "\\%.3o", c);
-	    }
-	}
-    }
-    printer(arg, "\"");
-}
-
-/*
- * logit - does the hard work for fatal et al.
- */
-static void
-logit(level, fmt, args)
-    int level;
-    char *fmt;
-    va_list args;
-{
-    int n;
-    char buf[1024];
-
-    n = vslprintf(buf, sizeof(buf), fmt, args);
-    log_write(level, buf);
-}
-
-static void
-log_write(level, buf)
-    int level;
-    char *buf;
-{
-    syslog(level, "%s", buf);
-    if (log_to_fd >= 0 && (level != LOG_DEBUG || debug)) {
-	int n = strlen(buf);
-
-	if (n > 0 && buf[n-1] == '\n')
-	    --n;
-	if (write(log_to_fd, buf, n) != n
-	    || write(log_to_fd, "\n", 1) != 1)
-	    log_to_fd = -1;
-    }
-}
-
-/*
- * fatal - log an error message and die horribly.
- */
-void
-fatal __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_ERR, fmt, pvar);
-    va_end(pvar);
-
-    die(1);			/* as promised */
-}
-
-/*
- * error - log an error message.
- */
-void
-error __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_ERR, fmt, pvar);
-    va_end(pvar);
-}
-
-/*
- * warn - log a warning message.
- */
-void
-warn __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_WARNING, fmt, pvar);
-    va_end(pvar);
-}
-
-/*
- * notice - log a notice-level message.
- */
-void
-notice __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_NOTICE, fmt, pvar);
-    va_end(pvar);
-}
-
-/*
- * info - log an informational message.
- */
-void
-info __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_INFO, fmt, pvar);
-    va_end(pvar);
-}
-
-/*
- * dbglog - log a debug message.
- */
-void
-dbglog __V((char *fmt, ...))
-{
-    va_list pvar;
-
-#if defined(__STDC__)
-    va_start(pvar, fmt);
-#else
-    char *fmt;
-    va_start(pvar);
-    fmt = va_arg(pvar, char *);
-#endif
-
-    logit(LOG_DEBUG, fmt, pvar);
-    va_end(pvar);
-}
-
-/* Procedures for locking the serial device using a lock file. */
-#ifndef LOCK_DIR
-#ifdef _linux_
-#define LOCK_DIR	"/var/lock"
-#else
-#ifdef SVR4
-#define LOCK_DIR	"/var/spool/locks"
-#else
-#define LOCK_DIR	"/var/spool/lock"
-#endif
-#endif
-#endif /* LOCK_DIR */
-
-static char lock_file[MAXPATHLEN];
-
-/*
- * lock - create a lock file for the named device
- */
-int
-lock(dev)
-    char *dev;
-{
-#ifdef LOCKLIB
-    int result;
-
-    result = mklock (dev, (void *) 0);
-    if (result == 0) {
-	strlcpy(lock_file, sizeof(lock_file), dev);
-	return 0;
-    }
-
-    if (result > 0)
-        notice("Device %s is locked by pid %d", dev, result);
-    else
-	error("Can't create lock file %s", lock_file);
-    return -1;
-
-#else /* LOCKLIB */
-
-    char lock_buffer[12];
-    int fd, pid, n;
-
-#ifdef SVR4
-    struct stat sbuf;
-
-    if (stat(dev, &sbuf) < 0) {
-	error("Can't get device number for %s: %m", dev);
-	return -1;
-    }
-    if ((sbuf.st_mode & S_IFMT) != S_IFCHR) {
-	error("Can't lock %s: not a character device", dev);
-	return -1;
-    }
-    slprintf(lock_file, sizeof(lock_file), "%s/LK.%03d.%03d.%03d",
-	     LOCK_DIR, major(sbuf.st_dev),
-	     major(sbuf.st_rdev), minor(sbuf.st_rdev));
-#else
-    char *p;
-
-    if ((p = strrchr(dev, '/')) != NULL)
-	dev = p + 1;
-    slprintf(lock_file, sizeof(lock_file), "%s/LCK..%s", LOCK_DIR, dev);
-#endif
-
-    while ((fd = open(lock_file, O_EXCL | O_CREAT | O_RDWR, 0644)) < 0) {
-	if (errno != EEXIST) {
-	    error("Can't create lock file %s: %m", lock_file);
-	    break;
-	}
-
-	/* Read the lock file to find out who has the device locked. */
-	fd = open(lock_file, O_RDONLY, 0);
-	if (fd < 0) {
-	    if (errno == ENOENT) /* This is just a timing problem. */
-		continue;
-	    error("Can't open existing lock file %s: %m", lock_file);
-	    break;
-	}
-#ifndef LOCK_BINARY
-	n = read(fd, lock_buffer, 11);
-#else
-	n = read(fd, &pid, sizeof(pid));
-#endif /* LOCK_BINARY */
-	close(fd);
-	fd = -1;
-	if (n <= 0) {
-	    error("Can't read pid from lock file %s", lock_file);
-	    break;
-	}
-
-	/* See if the process still exists. */
-#ifndef LOCK_BINARY
-	lock_buffer[n] = 0;
-	pid = atoi(lock_buffer);
-#endif /* LOCK_BINARY */
-	if (pid == getpid())
-	    return 1;		/* somebody else locked it for us */
-	if (pid == 0
-	    || (kill(pid, 0) == -1 && errno == ESRCH)) {
-	    if (unlink (lock_file) == 0) {
-		notice("Removed stale lock on %s (pid %d)", dev, pid);
-		continue;
-	    }
-	    warn("Couldn't remove stale lock on %s", dev);
-	} else
-	    notice("Device %s is locked by pid %d", dev, pid);
-	break;
-    }
-
-    if (fd < 0) {
-	lock_file[0] = 0;
-	return -1;
-    }
-
-    pid = getpid();
-#ifndef LOCK_BINARY
-    slprintf(lock_buffer, sizeof(lock_buffer), "%10d\n", pid);
-    write (fd, lock_buffer, 11);
-#else
-    write(fd, &pid, sizeof (pid));
-#endif
-    close(fd);
-    return 0;
-
-#endif
-}
-
-/*
- * relock - called to update our lockfile when we are about to detach,
- * thus changing our pid (we fork, the child carries on, and the parent dies).
- * Note that this is called by the parent, with pid equal to the pid
- * of the child.  This avoids a potential race which would exist if
- * we had the child rewrite the lockfile (the parent might die first,
- * and another process could think the lock was stale if it checked
- * between when the parent died and the child rewrote the lockfile).
- */
-int
-relock(pid)
-    int pid;
-{
-#ifdef LOCKLIB
-    /* XXX is there a way to do this? */
-    return -1;
-#else /* LOCKLIB */
-
-    int fd;
-    char lock_buffer[12];
-
-    if (lock_file[0] == 0)
-	return -1;
-    fd = open(lock_file, O_WRONLY, 0);
-    if (fd < 0) {
-	error("Couldn't reopen lock file %s: %m", lock_file);
-	lock_file[0] = 0;
-	return -1;
-    }
-
-#ifndef LOCK_BINARY
-    slprintf(lock_buffer, sizeof(lock_buffer), "%10d\n", pid);
-    write (fd, lock_buffer, 11);
-#else
-    write(fd, &pid, sizeof(pid));
-#endif /* LOCK_BINARY */
-    close(fd);
-    return 0;
-
-#endif /* LOCKLIB */
-}
-
-/*
- * unlock - remove our lockfile
- */
-void
-unlock()
-{
-    if (lock_file[0]) {
-#ifdef LOCKLIB
-	(void) rmlock(lock_file, (void *) 0);
-#else
-	unlink(lock_file);
-#endif
-	lock_file[0] = 0;
-    }
-}
-
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux b/mdk-stage1/ppp/pppdump/Makefile.linux
deleted file mode 100644
index 1d8d78ff7..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS=  -I../include/net $(RPM_OPT_FLAGS)
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) $(RPM_OPT_FLAGS) -o pppdump $(OBJS)
-
-clean:
-	rm -f pppdump $(OBJS) *~
-
-install:
-	mkdir -p $(BINDIR) $(MANDIR)/man8
-	$(INSTALL) -s -c pppdump $(BINDIR)
-	$(INSTALL) -c pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt b/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt
deleted file mode 100644
index d02fecde8..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux.makeopt
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS= -O -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) -o pppdump $(OBJS)
-
-clean:
-	rm -f pppdump $(OBJS) *~
-
-install:
-	mkdir -p $(BINDIR) $(MANDIR)/man8
-	$(INSTALL) -s -c pppdump $(BINDIR)
-	$(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile b/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile
deleted file mode 100644
index 4c98b6c6d..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-CFLAGS= -O -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-INSTALL= install
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) $(RPM_OPT_FLAGS) -o pppdump $(OBJS)
-
-clean:
-	rm -f pppdump $(OBJS) *~
-
-install:
-	mkdir -p $(BINDIR) $(MANDIR)/man8
-	$(INSTALL) -s -c pppdump $(BINDIR)
-	$(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.sol2 b/mdk-stage1/ppp/pppdump/Makefile.sol2
deleted file mode 100644
index d7e6b413e..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.sol2
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# pppdump Makefile for SVR4 systems
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CFLAGS= $(COPTS) -I../include/net
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) -o pppdump $(OBJS)
-
-clean:
-	rm -f $(OBJS) pppdump *~
-
-install:
-	$(INSTALL) -f $(BINDIR) pppdump
-	$(INSTALL) -m 444 -f $(MANDIR)/man8 pppdump.8
diff --git a/mdk-stage1/ppp/pppdump/Makefile.sunos4 b/mdk-stage1/ppp/pppdump/Makefile.sunos4
deleted file mode 100644
index 915c8267d..000000000
--- a/mdk-stage1/ppp/pppdump/Makefile.sunos4
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-OBJS = pppdump.o bsd-comp.o deflate.o zlib.o
-CFLAGS = $(COPTS) -I../include/net
-
-all:	pppdump
-
-pppdump: $(OBJS)
-	$(CC) -o pppdump $(OBJS)
-
-clean:
-	rm -f pppdump $(OBJS) *~
-
-install: pppdump
-	$(INSTALL) -c pppdump $(BINDIR)/pppdump
-	$(INSTALL) -c -m 444 pppdump.8 $(MANDIR)/man8/pppdump.8
diff --git a/mdk-stage1/ppp/pppdump/bsd-comp.c b/mdk-stage1/ppp/pppdump/bsd-comp.c
deleted file mode 100644
index 1e14e98bb..000000000
--- a/mdk-stage1/ppp/pppdump/bsd-comp.c
+++ /dev/null
@@ -1,750 +0,0 @@
-/* Because this code is derived from the 4.3BSD compress source:
- *
- *
- * Copyright (c) 1985, 1986 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * James A. Woods, derived from original work by Spencer Thomas
- * and Joseph Orost.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed by the University of
- *	California, Berkeley and its contributors.
- * 4. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * $Id$
- */
-
-#include <sys/types.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-
-#if DO_BSD_COMPRESS
-
-/*
- * PPP "BSD compress" compression
- *  The differences between this compression and the classic BSD LZW
- *  source are obvious from the requirement that the classic code worked
- *  with files while this handles arbitrarily long streams that
- *  are broken into packets.  They are:
- *
- *	When the code size expands, a block of junk is not emitted by
- *	    the compressor and not expected by the decompressor.
- *
- *	New codes are not necessarily assigned every time an old
- *	    code is output by the compressor.  This is because a packet
- *	    end forces a code to be emitted, but does not imply that a
- *	    new sequence has been seen.
- *
- *	The compression ratio is checked at the first end of a packet
- *	    after the appropriate gap.	Besides simplifying and speeding
- *	    things up, this makes it more likely that the transmitter
- *	    and receiver will agree when the dictionary is cleared when
- *	    compression is not going well.
- */
-
-/*
- * A dictionary for doing BSD compress.
- */
-struct bsd_db {
-    int	    totlen;			/* length of this structure */
-    u_int   hsize;			/* size of the hash table */
-    u_char  hshift;			/* used in hash function */
-    u_char  n_bits;			/* current bits/code */
-    u_char  maxbits;
-    u_char  debug;
-    u_char  unit;
-    u_short seqno;			/* sequence number of next packet */
-    u_int   hdrlen;			/* header length to preallocate */
-    u_int   mru;
-    u_int   maxmaxcode;			/* largest valid code */
-    u_int   max_ent;			/* largest code in use */
-    u_int   in_count;			/* uncompressed bytes, aged */
-    u_int   bytes_out;			/* compressed bytes, aged */
-    u_int   ratio;			/* recent compression ratio */
-    u_int   checkpoint;			/* when to next check the ratio */
-    u_int   clear_count;		/* times dictionary cleared */
-    u_int   incomp_count;		/* incompressible packets */
-    u_int   incomp_bytes;		/* incompressible bytes */
-    u_int   uncomp_count;		/* uncompressed packets */
-    u_int   uncomp_bytes;		/* uncompressed bytes */
-    u_int   comp_count;			/* compressed packets */
-    u_int   comp_bytes;			/* compressed bytes */
-    u_short *lens;			/* array of lengths of codes */
-    struct bsd_dict {
-	union {				/* hash value */
-	    u_int32_t	fcode;
-	    struct {
-#ifdef BSD_LITTLE_ENDIAN
-		u_short prefix;		/* preceding code */
-		u_char	suffix;		/* last character of new code */
-		u_char	pad;
-#else
-		u_char	pad;
-		u_char	suffix;		/* last character of new code */
-		u_short prefix;		/* preceding code */
-#endif
-	    } hs;
-	} f;
-	u_short codem1;			/* output of hash table -1 */
-	u_short cptr;			/* map code to hash table entry */
-    } dict[1];
-};
-
-#define BSD_OVHD	2		/* BSD compress overhead/packet */
-#define BSD_INIT_BITS	BSD_MIN_BITS
-
-static void	*bsd_decomp_alloc __P((u_char *options, int opt_len));
-static void	bsd_free __P((void *state));
-static int	bsd_decomp_init __P((void *state, u_char *options, int opt_len,
-				     int unit, int hdrlen, int mru, int debug));
-static void	bsd_incomp __P((void *state, u_char *dmsg, int len));
-static int	bsd_decompress __P((void *state, u_char *cmp, int inlen,
-				    u_char *dmp, int *outlen));
-static void	bsd_reset __P((void *state));
-static void	bsd_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Exported procedures.
- */
-struct compressor ppp_bsd_compress = {
-    CI_BSD_COMPRESS,		/* compress_proto */
-    bsd_decomp_alloc,		/* decomp_alloc */
-    bsd_free,			/* decomp_free */
-    bsd_decomp_init,		/* decomp_init */
-    bsd_reset,			/* decomp_reset */
-    bsd_decompress,		/* decompress */
-    bsd_incomp,			/* incomp */
-    bsd_comp_stats,		/* decomp_stat */
-};
-
-/*
- * the next two codes should not be changed lightly, as they must not
- * lie within the contiguous general code space.
- */
-#define CLEAR	256			/* table clear output code */
-#define FIRST	257			/* first free entry */
-#define LAST	255
-
-#define MAXCODE(b)	((1 << (b)) - 1)
-#define BADCODEM1	MAXCODE(BSD_MAX_BITS)
-
-#define BSD_HASH(prefix,suffix,hshift)	((((u_int32_t)(suffix)) << (hshift)) \
-					 ^ (u_int32_t)(prefix))
-#define BSD_KEY(prefix,suffix)		((((u_int32_t)(suffix)) << 16) \
-					 + (u_int32_t)(prefix))
-
-#define CHECK_GAP	10000		/* Ratio check interval */
-
-#define RATIO_SCALE_LOG	8
-#define RATIO_SCALE	(1<<RATIO_SCALE_LOG)
-#define RATIO_MAX	(0x7fffffff>>RATIO_SCALE_LOG)
-
-/*
- * clear the dictionary
- */
-static void
-bsd_clear(db)
-    struct bsd_db *db;
-{
-    db->clear_count++;
-    db->max_ent = FIRST-1;
-    db->n_bits = BSD_INIT_BITS;
-    db->ratio = 0;
-    db->bytes_out = 0;
-    db->in_count = 0;
-    db->checkpoint = CHECK_GAP;
-}
-
-/*
- * If the dictionary is full, then see if it is time to reset it.
- *
- * Compute the compression ratio using fixed-point arithmetic
- * with 8 fractional bits.
- *
- * Since we have an infinite stream instead of a single file,
- * watch only the local compression ratio.
- *
- * Since both peers must reset the dictionary at the same time even in
- * the absence of CLEAR codes (while packets are incompressible), they
- * must compute the same ratio.
- */
-static int				/* 1=output CLEAR */
-bsd_check(db)
-    struct bsd_db *db;
-{
-    u_int new_ratio;
-
-    if (db->in_count >= db->checkpoint) {
-	/* age the ratio by limiting the size of the counts */
-	if (db->in_count >= RATIO_MAX
-	    || db->bytes_out >= RATIO_MAX) {
-	    db->in_count -= db->in_count/4;
-	    db->bytes_out -= db->bytes_out/4;
-	}
-
-	db->checkpoint = db->in_count + CHECK_GAP;
-
-	if (db->max_ent >= db->maxmaxcode) {
-	    /* Reset the dictionary only if the ratio is worse,
-	     * or if it looks as if it has been poisoned
-	     * by incompressible data.
-	     *
-	     * This does not overflow, because
-	     *	db->in_count <= RATIO_MAX.
-	     */
-	    new_ratio = db->in_count << RATIO_SCALE_LOG;
-	    if (db->bytes_out != 0)
-		new_ratio /= db->bytes_out;
-
-	    if (new_ratio < db->ratio || new_ratio < 1 * RATIO_SCALE) {
-		bsd_clear(db);
-		return 1;
-	    }
-	    db->ratio = new_ratio;
-	}
-    }
-    return 0;
-}
-
-/*
- * Return statistics.
- */
-static void
-bsd_comp_stats(state, stats)
-    void *state;
-    struct compstat *stats;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int out;
-
-    stats->unc_bytes = db->uncomp_bytes;
-    stats->unc_packets = db->uncomp_count;
-    stats->comp_bytes = db->comp_bytes;
-    stats->comp_packets = db->comp_count;
-    stats->inc_bytes = db->incomp_bytes;
-    stats->inc_packets = db->incomp_count;
-    stats->ratio = db->in_count;
-    out = db->bytes_out;
-    if (stats->ratio <= 0x7fffff)
-	stats->ratio <<= 8;
-    else
-	out >>= 8;
-    if (out != 0)
-	stats->ratio /= out;
-}
-
-/*
- * Reset state, as on a CCP ResetReq.
- */
-static void
-bsd_reset(state)
-    void *state;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-
-    db->seqno = 0;
-    bsd_clear(db);
-    db->clear_count = 0;
-}
-
-/*
- * Allocate space for a (de) compressor.
- */
-static void *
-bsd_alloc(options, opt_len, decomp)
-    u_char *options;
-    int opt_len, decomp;
-{
-    int bits;
-    u_int newlen, hsize, hshift, maxmaxcode;
-    struct bsd_db *db;
-
-    if (opt_len != 3 || options[0] != CI_BSD_COMPRESS || options[1] != 3
-	|| BSD_VERSION(options[2]) != BSD_CURRENT_VERSION)
-	return NULL;
-
-    bits = BSD_NBITS(options[2]);
-    switch (bits) {
-    case 9:			/* needs 82152 for both directions */
-    case 10:			/* needs 84144 */
-    case 11:			/* needs 88240 */
-    case 12:			/* needs 96432 */
-	hsize = 5003;
-	hshift = 4;
-	break;
-    case 13:			/* needs 176784 */
-	hsize = 9001;
-	hshift = 5;
-	break;
-    case 14:			/* needs 353744 */
-	hsize = 18013;
-	hshift = 6;
-	break;
-    case 15:			/* needs 691440 */
-	hsize = 35023;
-	hshift = 7;
-	break;
-    case 16:			/* needs 1366160--far too much, */
-	/* hsize = 69001; */	/* and 69001 is too big for cptr */
-	/* hshift = 8; */	/* in struct bsd_db */
-	/* break; */
-    default:
-	return NULL;
-    }
-
-    maxmaxcode = MAXCODE(bits);
-    newlen = sizeof(*db) + (hsize-1) * (sizeof(db->dict[0]));
-    db = (struct bsd_db *) malloc(newlen);
-    if (!db)
-	return NULL;
-    memset(db, 0, sizeof(*db) - sizeof(db->dict));
-
-    if (!decomp) {
-	db->lens = NULL;
-    } else {
-	db->lens = (u_short *) malloc((maxmaxcode+1) * sizeof(db->lens[0]));
-	if (!db->lens) {
-	    free(db);
-	    return NULL;
-	}
-    }
-
-    db->totlen = newlen;
-    db->hsize = hsize;
-    db->hshift = hshift;
-    db->maxmaxcode = maxmaxcode;
-    db->maxbits = bits;
-
-    return (void *) db;
-}
-
-static void
-bsd_free(state)
-    void *state;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-
-    if (db->lens)
-	free(db->lens);
-    free(db);
-}
-
-static void *
-bsd_decomp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    return bsd_alloc(options, opt_len, 1);
-}
-
-/*
- * Initialize the database.
- */
-static int
-bsd_init(db, options, opt_len, unit, hdrlen, mru, debug, decomp)
-    struct bsd_db *db;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug, decomp;
-{
-    int i;
-
-    if (opt_len < CILEN_BSD_COMPRESS
-	|| options[0] != CI_BSD_COMPRESS || options[1] != CILEN_BSD_COMPRESS
-	|| BSD_VERSION(options[2]) != BSD_CURRENT_VERSION
-	|| BSD_NBITS(options[2]) != db->maxbits
-	|| decomp && db->lens == NULL)
-	return 0;
-
-    if (decomp) {
-	i = LAST+1;
-	while (i != 0)
-	    db->lens[--i] = 1;
-    }
-    i = db->hsize;
-    while (i != 0) {
-	db->dict[--i].codem1 = BADCODEM1;
-	db->dict[i].cptr = 0;
-    }
-
-    db->unit = unit;
-    db->hdrlen = hdrlen;
-    db->mru = mru;
-    if (debug)
-	db->debug = 1;
-
-    bsd_reset(db);
-
-    return 1;
-}
-
-static int
-bsd_decomp_init(state, options, opt_len, unit, hdrlen, mru, debug)
-    void *state;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug;
-{
-    return bsd_init((struct bsd_db *) state, options, opt_len,
-		    unit, hdrlen, mru, debug, 1);
-}
-
-
-/*
- * Update the "BSD Compress" dictionary on the receiver for
- * incompressible data by pretending to compress the incoming data.
- */
-static void
-bsd_incomp(state, dmsg, mlen)
-    void *state;
-    u_char *dmsg;
-    int mlen;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int hshift = db->hshift;
-    u_int max_ent = db->max_ent;
-    u_int n_bits = db->n_bits;
-    struct bsd_dict *dictp;
-    u_int32_t fcode;
-    u_char c;
-    long hval, disp;
-    int slen, ilen;
-    u_int bitno = 7;
-    u_char *rptr;
-    u_int ent;
-
-    rptr = dmsg;
-    ent = rptr[0];		/* get the protocol */
-    if (ent == 0) {
-	++rptr;
-	--mlen;
-	ent = rptr[0];
-    }
-    if ((ent & 1) == 0 || ent < 0x21 || ent > 0xf9)
-	return;
-
-    db->seqno++;
-    ilen = 1;		/* count the protocol as 1 byte */
-    ++rptr;
-    slen = dmsg + mlen - rptr;
-    ilen += slen;
-    for (; slen > 0; --slen) {
-	c = *rptr++;
-	fcode = BSD_KEY(ent, c);
-	hval = BSD_HASH(ent, c, hshift);
-	dictp = &db->dict[hval];
-
-	/* validate and then check the entry */
-	if (dictp->codem1 >= max_ent)
-	    goto nomatch;
-	if (dictp->f.fcode == fcode) {
-	    ent = dictp->codem1+1;
-	    continue;   /* found (prefix,suffix) */
-	}
-
-	/* continue probing until a match or invalid entry */
-	disp = (hval == 0) ? 1 : hval;
-	do {
-	    hval += disp;
-	    if (hval >= db->hsize)
-		hval -= db->hsize;
-	    dictp = &db->dict[hval];
-	    if (dictp->codem1 >= max_ent)
-		goto nomatch;
-	} while (dictp->f.fcode != fcode);
-	ent = dictp->codem1+1;
-	continue;	/* finally found (prefix,suffix) */
-
-    nomatch:		/* output (count) the prefix */
-	bitno += n_bits;
-
-	/* code -> hashtable */
-	if (max_ent < db->maxmaxcode) {
-	    struct bsd_dict *dictp2;
-	    /* expand code size if needed */
-	    if (max_ent >= MAXCODE(n_bits))
-		db->n_bits = ++n_bits;
-
-	    /* Invalidate previous hash table entry
-	     * assigned this code, and then take it over.
-	     */
-	    dictp2 = &db->dict[max_ent+1];
-	    if (db->dict[dictp2->cptr].codem1 == max_ent)
-		db->dict[dictp2->cptr].codem1 = BADCODEM1;
-	    dictp2->cptr = hval;
-	    dictp->codem1 = max_ent;
-	    dictp->f.fcode = fcode;
-
-	    db->max_ent = ++max_ent;
-	    db->lens[max_ent] = db->lens[ent]+1;
-	}
-	ent = c;
-    }
-    bitno += n_bits;		/* output (count) the last code */
-    db->bytes_out += bitno/8;
-    db->in_count += ilen;
-    (void)bsd_check(db);
-
-    ++db->incomp_count;
-    db->incomp_bytes += ilen;
-    ++db->uncomp_count;
-    db->uncomp_bytes += ilen;
-
-    /* Increase code size if we would have without the packet
-     * boundary and as the decompressor will.
-     */
-    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode)
-	db->n_bits++;
-}
-
-
-/*
- * Decompress "BSD Compress"
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression.  For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-bsd_decompress(state, cmsg, inlen, dmp, outlenp)
-    void *state;
-    u_char *cmsg, *dmp;
-    int inlen, *outlenp;
-{
-    struct bsd_db *db = (struct bsd_db *) state;
-    u_int max_ent = db->max_ent;
-    u_int32_t accm = 0;
-    u_int bitno = 32;		/* 1st valid bit in accm */
-    u_int n_bits = db->n_bits;
-    u_int tgtbitno = 32-n_bits;	/* bitno when we have a code */
-    struct bsd_dict *dictp;
-    int explen, i, seq, len;
-    u_int incode, oldcode, finchar;
-    u_char *p, *rptr, *wptr;
-    int ilen;
-    int dlen, space, codelen, extra;
-
-    rptr = cmsg;
-    if (*rptr == 0)
-	++rptr;
-    ++rptr;			/* skip protocol (assumed 0xfd) */
-    seq = (rptr[0] << 8) + rptr[1];
-    rptr += BSD_OVHD;
-    ilen = len = cmsg + inlen - rptr;
-
-    /*
-     * Check the sequence number and give up if it is not what we expect.
-     */
-    if (seq != db->seqno++) {
-	if (db->debug)
-	    printf("bsd_decomp%d: bad sequence # %d, expected %d\n",
-		   db->unit, seq, db->seqno - 1);
-	return DECOMP_ERROR;
-    }
-
-    wptr = dmp + db->hdrlen;
-
-    oldcode = CLEAR;
-    explen = 0;
-    while (len > 0) {
-	/*
-	 * Accumulate bytes until we have a complete code.
-	 * Then get the next code, relying on the 32-bit,
-	 * unsigned accm to mask the result.
-	 */
-	bitno -= 8;
-	accm |= *rptr++ << bitno;
-	--len;
-	if (tgtbitno < bitno)
-	    continue;
-	incode = accm >> tgtbitno;
-	accm <<= n_bits;
-	bitno += n_bits;
-
-	if (incode == CLEAR) {
-	    /*
-	     * The dictionary must only be cleared at
-	     * the end of a packet.  But there could be an
-	     * empty message block at the end.
-	     */
-	    if (len > 0) {
-		if (db->debug)
-		    printf("bsd_decomp%d: bad CLEAR\n", db->unit);
-		return DECOMP_FATALERROR;
-	    }
-	    bsd_clear(db);
-	    explen = ilen = 0;
-	    break;
-	}
-
-	if (incode > max_ent + 2 || incode > db->maxmaxcode
-	    || incode > max_ent && oldcode == CLEAR) {
-	    if (db->debug) {
-		printf("bsd_decomp%d: bad code 0x%x oldcode=0x%x ",
-		       db->unit, incode, oldcode);
-		printf("max_ent=0x%x dlen=%d seqno=%d\n",
-		       max_ent, dlen, db->seqno);
-	    }
-	    return DECOMP_FATALERROR;	/* probably a bug */
-	}
-
-	/* Special case for KwKwK string. */
-	if (incode > max_ent) {
-	    finchar = oldcode;
-	    extra = 1;
-	} else {
-	    finchar = incode;
-	    extra = 0;
-	}
-
-	codelen = db->lens[finchar];
-	explen += codelen + extra;
-	if (explen > db->mru + 1) {
-	    if (db->debug)
-		printf("bsd_decomp%d: ran out of mru\n", db->unit);
-	    return DECOMP_FATALERROR;
-	}
-
-	/*
-	 * Decode this code and install it in the decompressed buffer.
-	 */
-	p = (wptr += codelen);
-	while (finchar > LAST) {
-	    dictp = &db->dict[db->dict[finchar].cptr];
-#ifdef DEBUG
-	    --codelen;
-	    if (codelen <= 0) {
-		printf("bsd_decomp%d: fell off end of chain ", db->unit);
-		printf("0x%x at 0x%x by 0x%x, max_ent=0x%x\n",
-		       incode, finchar, db->dict[finchar].cptr, max_ent);
-		return DECOMP_FATALERROR;
-	    }
-	    if (dictp->codem1 != finchar-1) {
-		printf("bsd_decomp%d: bad code chain 0x%x finchar=0x%x ",
-		       db->unit, incode, finchar);
-		printf("oldcode=0x%x cptr=0x%x codem1=0x%x\n", oldcode,
-		       db->dict[finchar].cptr, dictp->codem1);
-		return DECOMP_FATALERROR;
-	    }
-#endif
-	    *--p = dictp->f.hs.suffix;
-	    finchar = dictp->f.hs.prefix;
-	}
-	*--p = finchar;
-
-#ifdef DEBUG
-	if (--codelen != 0)
-	    printf("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n",
-		   db->unit, codelen, incode, max_ent);
-#endif
-
-	if (extra)		/* the KwKwK case again */
-	    *wptr++ = finchar;
-
-	/*
-	 * If not first code in a packet, and
-	 * if not out of code space, then allocate a new code.
-	 *
-	 * Keep the hash table correct so it can be used
-	 * with uncompressed packets.
-	 */
-	if (oldcode != CLEAR && max_ent < db->maxmaxcode) {
-	    struct bsd_dict *dictp2;
-	    u_int32_t fcode;
-	    int hval, disp;
-
-	    fcode = BSD_KEY(oldcode,finchar);
-	    hval = BSD_HASH(oldcode,finchar,db->hshift);
-	    dictp = &db->dict[hval];
-
-	    /* look for a free hash table entry */
-	    if (dictp->codem1 < max_ent) {
-		disp = (hval == 0) ? 1 : hval;
-		do {
-		    hval += disp;
-		    if (hval >= db->hsize)
-			hval -= db->hsize;
-		    dictp = &db->dict[hval];
-		} while (dictp->codem1 < max_ent);
-	    }
-
-	    /*
-	     * Invalidate previous hash table entry
-	     * assigned this code, and then take it over
-	     */
-	    dictp2 = &db->dict[max_ent+1];
-	    if (db->dict[dictp2->cptr].codem1 == max_ent) {
-		db->dict[dictp2->cptr].codem1 = BADCODEM1;
-	    }
-	    dictp2->cptr = hval;
-	    dictp->codem1 = max_ent;
-	    dictp->f.fcode = fcode;
-
-	    db->max_ent = ++max_ent;
-	    db->lens[max_ent] = db->lens[oldcode]+1;
-
-	    /* Expand code size if needed. */
-	    if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode) {
-		db->n_bits = ++n_bits;
-		tgtbitno = 32-n_bits;
-	    }
-	}
-	oldcode = incode;
-    }
-    *outlenp = wptr - (dmp + db->hdrlen);
-
-    /*
-     * Keep the checkpoint right so that incompressible packets
-     * clear the dictionary at the right times.
-     */
-    db->bytes_out += ilen;
-    db->in_count += explen;
-    if (bsd_check(db) && db->debug) {
-	printf("bsd_decomp%d: peer should have cleared dictionary\n",
-	       db->unit);
-    }
-
-    ++db->comp_count;
-    db->comp_bytes += ilen + BSD_OVHD;
-    ++db->uncomp_count;
-    db->uncomp_bytes += explen;
-
-    return DECOMP_OK;
-}
-#endif /* DO_BSD_COMPRESS */
diff --git a/mdk-stage1/ppp/pppdump/deflate.c b/mdk-stage1/ppp/pppdump/deflate.c
deleted file mode 100644
index 08e8abc0d..000000000
--- a/mdk-stage1/ppp/pppdump/deflate.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * ppp_deflate.c - interface the zlib procedures for Deflate compression
- * and decompression (as used by gzip) to the PPP code.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#include <sys/types.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-#include "zlib.h"
-
-#if DO_DEFLATE
-
-#define DEFLATE_DEBUG	1
-
-/*
- * State for a Deflate (de)compressor.
- */
-struct deflate_state {
-    int		seqno;
-    int		w_size;
-    int		unit;
-    int		hdrlen;
-    int		mru;
-    int		debug;
-    z_stream	strm;
-    struct compstat stats;
-};
-
-#define DEFLATE_OVHD	2		/* Deflate overhead/packet */
-
-static void	*z_alloc __P((void *, u_int items, u_int size));
-static void	z_free __P((void *, void *ptr, u_int nb));
-static void	*z_decomp_alloc __P((u_char *options, int opt_len));
-static void	z_decomp_free __P((void *state));
-static int	z_decomp_init __P((void *state, u_char *options, int opt_len,
-				     int unit, int hdrlen, int mru, int debug));
-static void	z_incomp __P((void *state, u_char *dmsg, int len));
-static int	z_decompress __P((void *state, u_char *cmp, int inlen,
-				    u_char *dmp, int *outlenp));
-static void	z_decomp_reset __P((void *state));
-static void	z_comp_stats __P((void *state, struct compstat *stats));
-
-/*
- * Procedures exported to if_ppp.c.
- */
-struct compressor ppp_deflate = {
-    CI_DEFLATE,			/* compress_proto */
-    z_decomp_alloc,		/* decomp_alloc */
-    z_decomp_free,		/* decomp_free */
-    z_decomp_init,		/* decomp_init */
-    z_decomp_reset,		/* decomp_reset */
-    z_decompress,		/* decompress */
-    z_incomp,			/* incomp */
-    z_comp_stats,		/* decomp_stat */
-};
-
-/*
- * Space allocation and freeing routines for use by zlib routines.
- */
-static void *
-z_alloc(notused, items, size)
-    void *notused;
-    u_int items, size;
-{
-    return malloc(items * size);
-}
-
-static void
-z_free(notused, ptr, nbytes)
-    void *notused;
-    void *ptr;
-    u_int nbytes;
-{
-    free(ptr);
-}
-
-static void
-z_comp_stats(arg, stats)
-    void *arg;
-    struct compstat *stats;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_int out;
-
-    *stats = state->stats;
-    stats->ratio = stats->unc_bytes;
-    out = stats->comp_bytes + stats->unc_bytes;
-    if (stats->ratio <= 0x7ffffff)
-	stats->ratio <<= 8;
-    else
-	out >>= 8;
-    if (out != 0)
-	stats->ratio /= out;
-}
-
-/*
- * Allocate space for a decompressor.
- */
-static void *
-z_decomp_alloc(options, opt_len)
-    u_char *options;
-    int opt_len;
-{
-    struct deflate_state *state;
-    int w_size;
-
-    if (opt_len != CILEN_DEFLATE || options[0] != CI_DEFLATE
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return NULL;
-    w_size = DEFLATE_SIZE(options[2]);
-    if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE)
-	return NULL;
-
-    state = (struct deflate_state *) malloc(sizeof(*state));
-    if (state == NULL)
-	return NULL;
-
-    state->strm.next_out = NULL;
-    state->strm.zalloc = (alloc_func) z_alloc;
-    state->strm.zfree = (free_func) z_free;
-    if (inflateInit2(&state->strm, -w_size) != Z_OK) {
-	free(state);
-	return NULL;
-    }
-
-    state->w_size = w_size;
-    memset(&state->stats, 0, sizeof(state->stats));
-    return (void *) state;
-}
-
-static void
-z_decomp_free(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    inflateEnd(&state->strm);
-    free(state);
-}
-
-static int
-z_decomp_init(arg, options, opt_len, unit, hdrlen, mru, debug)
-    void *arg;
-    u_char *options;
-    int opt_len, unit, hdrlen, mru, debug;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    if (opt_len < CILEN_DEFLATE || options[0] != CI_DEFLATE
-	|| options[1] != CILEN_DEFLATE
-	|| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	|| DEFLATE_SIZE(options[2]) != state->w_size
-	|| options[3] != DEFLATE_CHK_SEQUENCE)
-	return 0;
-
-    state->seqno = 0;
-    state->unit = unit;
-    state->hdrlen = hdrlen;
-    state->debug = debug;
-    state->mru = mru;
-
-    inflateReset(&state->strm);
-
-    return 1;
-}
-
-static void
-z_decomp_reset(arg)
-    void *arg;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-
-    state->seqno = 0;
-    inflateReset(&state->strm);
-}
-
-/*
- * Decompress a Deflate-compressed packet.
- *
- * Because of patent problems, we return DECOMP_ERROR for errors
- * found by inspecting the input data and for system problems, but
- * DECOMP_FATALERROR for any errors which could possibly be said to
- * be being detected "after" decompression.  For DECOMP_ERROR,
- * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be
- * infringing a patent of Motorola's if we do, so we take CCP down
- * instead.
- *
- * Given that the frame has the correct sequence number and a good FCS,
- * errors such as invalid codes in the input most likely indicate a
- * bug, so we return DECOMP_FATALERROR for them in order to turn off
- * compression, even though they are detected by inspecting the input.
- */
-static int
-z_decompress(arg, mi, inlen, mo, outlenp)
-    void *arg;
-    u_char *mi, *mo;
-    int inlen, *outlenp;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_char *rptr, *wptr;
-    int rlen, olen, ospace;
-    int seq, i, flush, r, decode_proto;
-
-    rptr = mi;
-    if (*rptr == 0)
-	++rptr;
-    ++rptr;
-
-    /* Check the sequence number. */
-    seq = (rptr[0] << 8) + rptr[1];
-    rptr += 2;
-    if (seq != state->seqno) {
-#if !DEFLATE_DEBUG
-	if (state->debug)
-#endif
-	    printf("z_decompress%d: bad seq # %d, expected %d\n",
-		   state->unit, seq, state->seqno);
-	return DECOMP_ERROR;
-    }
-    ++state->seqno;
-
-    /*
-     * Set up to call inflate.
-     */
-    wptr = mo;
-    state->strm.next_in = rptr;
-    state->strm.avail_in = mi + inlen - rptr;
-    rlen = state->strm.avail_in + PPP_HDRLEN + DEFLATE_OVHD;
-    state->strm.next_out = wptr;
-    state->strm.avail_out = state->mru + 2;
-
-    r = inflate(&state->strm, Z_PACKET_FLUSH);
-    if (r != Z_OK) {
-#if !DEFLATE_DEBUG
-	if (state->debug)
-#endif
-	    printf("z_decompress%d: inflate returned %d (%s)\n",
-		   state->unit, r, (state->strm.msg? state->strm.msg: ""));
-	return DECOMP_FATALERROR;
-    }
-    olen = state->mru + 2 - state->strm.avail_out;
-    *outlenp = olen;
-
-    if ((wptr[0] & 1) != 0)
-	++olen;			/* for suppressed protocol high byte */
-    olen += 2;			/* for address, control */
-
-#if DEFLATE_DEBUG
-    if (olen > state->mru + PPP_HDRLEN)
-	printf("ppp_deflate%d: exceeded mru (%d > %d)\n",
-	       state->unit, olen, state->mru + PPP_HDRLEN);
-#endif
-
-    state->stats.unc_bytes += olen;
-    state->stats.unc_packets++;
-    state->stats.comp_bytes += rlen;
-    state->stats.comp_packets++;
-
-    return DECOMP_OK;
-}
-
-/*
- * Incompressible data has arrived - add it to the history.
- */
-static void
-z_incomp(arg, mi, mlen)
-    void *arg;
-    u_char *mi;
-    int mlen;
-{
-    struct deflate_state *state = (struct deflate_state *) arg;
-    u_char *rptr;
-    int rlen, proto, r;
-
-    /*
-     * Check that the protocol is one we handle.
-     */
-    rptr = mi;
-    proto = rptr[0];
-    if ((proto & 1) == 0)
-	proto = (proto << 8) + rptr[1];
-    if (proto > 0x3fff || proto == 0xfd || proto == 0xfb)
-	return;
-
-    ++state->seqno;
-
-    if (rptr[0] == 0)
-	++rptr;
-    rlen = mi + mlen - rptr;
-    state->strm.next_in = rptr;
-    state->strm.avail_in = rlen;
-    r = inflateIncomp(&state->strm);
-    if (r != Z_OK) {
-	/* gak! */
-#if !DEFLATE_DEBUG
-	if (state->debug)
-#endif
-	    printf("z_incomp%d: inflateIncomp returned %d (%s)\n",
-		   state->unit, r, (state->strm.msg? state->strm.msg: ""));
-	return;
-    }
-
-    /*
-     * Update stats.
-     */
-    if (proto <= 0xff)
-	++rlen;
-    rlen += 2;
-    state->stats.inc_bytes += rlen;
-    state->stats.inc_packets++;
-    state->stats.unc_bytes += rlen;
-    state->stats.unc_packets++;
-}
-
-#endif /* DO_DEFLATE */
diff --git a/mdk-stage1/ppp/pppdump/ppp-comp.h b/mdk-stage1/ppp/pppdump/ppp-comp.h
deleted file mode 100644
index 9221c0db4..000000000
--- a/mdk-stage1/ppp/pppdump/ppp-comp.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * ppp-comp.h - Definitions for doing PPP packet compression.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-#ifndef _NET_PPP_COMP_H
-#define _NET_PPP_COMP_H
-
-/*
- * The following symbols control whether we include code for
- * various compression methods.
- */
-#ifndef DO_BSD_COMPRESS
-#define DO_BSD_COMPRESS	1	/* by default, include BSD-Compress */
-#endif
-#ifndef DO_DEFLATE
-#define DO_DEFLATE	1	/* by default, include Deflate */
-#endif
-#define DO_PREDICTOR_1	0
-#define DO_PREDICTOR_2	0
-
-/*
- * Structure giving methods for compression/decompression.
- */
-struct compressor {
-	int	compress_proto;	/* CCP compression protocol number */
-
-	/* Allocate space for a decompressor (receive side) */
-	void	*(*decomp_alloc) __P((u_char *options, int opt_len));
-	/* Free space used by a decompressor */
-	void	(*decomp_free) __P((void *state));
-	/* Initialize a decompressor */
-	int	(*decomp_init) __P((void *state, u_char *options, int opt_len,
-				    int unit, int hdrlen, int mru, int debug));
-	/* Reset a decompressor */
-	void	(*decomp_reset) __P((void *state));
-	/* Decompress a packet. */
-	int	(*decompress) __P((void *state, u_char *mp, int inlen,
-				   u_char *dmp, int *outlen));
-	/* Update state for an incompressible packet received */
-	void	(*incomp) __P((void *state, u_char *mp, int len));
-	/* Return decompression statistics */
-	void	(*decomp_stat) __P((void *state, struct compstat *stats));
-};
-
-/*
- * Return values for decompress routine.
- * We need to make these distinctions so that we can disable certain
- * useful functionality, namely sending a CCP reset-request as a result
- * of an error detected after decompression.  This is to avoid infringing
- * a patent held by Motorola.
- * Don't you just lurve software patents.
- */
-#define DECOMP_OK		0	/* everything went OK */
-#define DECOMP_ERROR		1	/* error detected before decomp. */
-#define DECOMP_FATALERROR	2	/* error detected after decomp. */
-
-/*
- * CCP codes.
- */
-#define CCP_CONFREQ	1
-#define CCP_CONFACK	2
-#define CCP_CONFNAK	3
-#define CCP_CONFREJ	4
-#define CCP_TERMREQ	5
-#define CCP_TERMACK	6
-#define CCP_RESETREQ	14
-#define CCP_RESETACK	15
-
-/*
- * Max # bytes for a CCP option
- */
-#define CCP_MAX_OPTION_LENGTH	32
-
-/*
- * Parts of a CCP packet.
- */
-#define CCP_CODE(dp)		((dp)[0])
-#define CCP_ID(dp)		((dp)[1])
-#define CCP_LENGTH(dp)		(((dp)[2] << 8) + (dp)[3])
-#define CCP_HDRLEN		4
-
-#define CCP_OPT_CODE(dp)	((dp)[0])
-#define CCP_OPT_LENGTH(dp)	((dp)[1])
-#define CCP_OPT_MINLEN		2
-
-/*
- * Definitions for BSD-Compress.
- */
-#define CI_BSD_COMPRESS		21	/* config. option for BSD-Compress */
-#define CILEN_BSD_COMPRESS	3	/* length of config. option */
-
-/* Macros for handling the 3rd byte of the BSD-Compress config option. */
-#define BSD_NBITS(x)		((x) & 0x1F)	/* number of bits requested */
-#define BSD_VERSION(x)		((x) >> 5)	/* version of option format */
-#define BSD_CURRENT_VERSION	1		/* current version number */
-#define BSD_MAKE_OPT(v, n)	(((v) << 5) | (n))
-
-#define BSD_MIN_BITS		9	/* smallest code size supported */
-#define BSD_MAX_BITS		15	/* largest code size supported */
-
-/*
- * Definitions for Deflate.
- */
-#define CI_DEFLATE		26	/* config option for Deflate */
-#define CI_DEFLATE_DRAFT	24	/* value used in original draft RFC */
-#define CILEN_DEFLATE		4	/* length of its config option */
-
-#define DEFLATE_MIN_SIZE	8
-#define DEFLATE_MAX_SIZE	15
-#define DEFLATE_METHOD_VAL	8
-#define DEFLATE_SIZE(x)		(((x) >> 4) + DEFLATE_MIN_SIZE)
-#define DEFLATE_METHOD(x)	((x) & 0x0F)
-#define DEFLATE_MAKE_OPT(w)	((((w) - DEFLATE_MIN_SIZE) << 4) \
-				 + DEFLATE_METHOD_VAL)
-#define DEFLATE_CHK_SEQUENCE	0
-
-/*
- * Definitions for other, as yet unsupported, compression methods.
- */
-#define CI_PREDICTOR_1		1	/* config option for Predictor-1 */
-#define CILEN_PREDICTOR_1	2	/* length of its config option */
-#define CI_PREDICTOR_2		2	/* config option for Predictor-2 */
-#define CILEN_PREDICTOR_2	2	/* length of its config option */
-
-#endif /* _NET_PPP_COMP_H */
diff --git a/mdk-stage1/ppp/pppdump/pppdump.8 b/mdk-stage1/ppp/pppdump/pppdump.8
deleted file mode 100644
index c0172f519..000000000
--- a/mdk-stage1/ppp/pppdump/pppdump.8
+++ /dev/null
@@ -1,62 +0,0 @@
-.\"	@(#) $Id$
-.TH PPPDUMP 8 "1 April 1999"
-.SH NAME
-pppdump \- convert PPP record file to readable format
-.SH SYNOPSIS
-.B pppdump
-[
-.B -h
-|
-.B -p
-[
-.B -d
-]] [
-.B -r
-] [
-.B -m \fImru
-] [
-.I file \fR...
-]
-.ti 12
-.SH DESCRIPTION
-The
-.B pppdump
-utility converts the files written using the \fIrecord\fR option of
-.B pppd
-into a human-readable format.  If one or more filenames are specified,
-.B pppdump
-will read each in turn; otherwise it will read its standard input.  In
-each case the result is written to standard output.
-.PP
-The options are as follows:
-.TP
-.B -h
-Prints the bytes sent and received in hexadecimal.  If neither this
-option nor the \fB-p\fR option is specified, the bytes are printed as
-the characters themselves, with non-printing and non-ASCII characters
-printed as escape sequences.
-.TP
-.B -p
-Collects the bytes sent and received into PPP packets, interpreting
-the async HDLC framing and escape characters and checking the FCS
-(frame check sequence) of each packet.  The packets are printed as hex
-values and as characters (non-printable characters are printed as
-`.').
-.TP
-.B -d
-With the \fB-p\fR option, this option causes
-.B pppdump
-to decompress packets which have been compressed with the BSD-Compress
-or Deflate methods.
-.TP
-.B -r
-Reverses the direction indicators, so that `sent' is printed for
-bytes or packets received, and `rcvd' is printed for bytes or packets
-sent.
-.TP
-.B -m \fImru
-Use \fImru\fR as the MRU (maximum receive unit) for both directions of
-the link when checking for over-length PPP packets (with the \fB-p\fR
-option).
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/pppdump/pppdump.c b/mdk-stage1/ppp/pppdump/pppdump.c
deleted file mode 100644
index a8e69d4bf..000000000
--- a/mdk-stage1/ppp/pppdump/pppdump.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * pppdump - print out the contents of a record file generated by
- * pppd in readable form.
- *
- * Copyright (C) 1999  Paul Mackerras.  All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms.  The name of the author
- * may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#include <stdio.h>
-#include <unistd.h>
-#include <time.h>
-#include <sys/types.h>
-#include "ppp_defs.h"
-#include "ppp-comp.h"
-
-int hexmode;
-int pppmode;
-int reverse;
-int decompress;
-int mru = 1500;
-int abs_times;
-time_t start_time;
-int start_time_tenths;
-int tot_sent, tot_rcvd;
-
-extern int optind;
-extern char *optarg;
-
-main(ac, av)
-    int ac;
-    char **av;
-{
-    int i;
-    char *p;
-    FILE *f;
-
-    while ((i = getopt(ac, av, "hprdm:a")) != -1) {
-	switch (i) {
-	case 'h':
-	    hexmode = 1;
-	    break;
-	case 'p':
-	    pppmode = 1;
-	    break;
-	case 'r':
-	    reverse = 1;
-	    break;
-	case 'd':
-	    decompress = 1;
-	    break;
-	case 'm':
-	    mru = atoi(optarg);
-	    break;
-	case 'a':
-	    abs_times = 1;
-	    break;
-	default:
-	    fprintf(stderr, "Usage: %s [-h | -p[d]] [-r] [-m mru] [-a] [file ...]\n", av[0]);
-	    exit(1);
-	}
-    }
-    if (optind >= ac)
-	dumplog(stdin);
-    else {
-	for (i = optind; i < ac; ++i) {
-	    p = av[i];
-	    if ((f = fopen(p, "r")) == NULL) {
-		perror(p);
-		exit(1);
-	    }
-	    if (pppmode)
-		dumpppp(f);
-	    else
-		dumplog(f);
-	    fclose(f);
-	}
-    }
-    exit(0);
-}
-
-dumplog(f)
-    FILE *f;
-{
-    int c, n, k, col;
-    int nb, c2;
-    unsigned char buf[16];
-
-    while ((c = getc(f)) != EOF) {
-	switch (c) {
-	case 1:
-	case 2:
-	    if (reverse)
-		c = 3 - c;
-	    printf("%s %c", c==1? "sent": "rcvd", hexmode? ' ': '"');
-	    col = 6;
-	    n = getc(f);
-	    n = (n << 8) + getc(f);
-	    *(c==1? &tot_sent: &tot_rcvd) += n;
-	    nb = 0;
-	    for (; n > 0; --n) {
-		c = getc(f);
-		if (c == EOF) {
-		    printf("\nEOF\n");
-		    exit(0);
-		}
-		if (hexmode) {
-		    if (nb >= 16) {
-			printf("  ");
-			for (k = 0; k < nb; ++k) {
-			    c2 = buf[k];
-			    putchar((' ' <= c2 && c2 <= '~')? c2: '.');
-			}
-			printf("\n      ");
-			nb = 0;
-		    }
-		    buf[nb++] = c;
-		    printf(" %.2x", c);
-		} else {
-		    k = (' ' <= c && c <= '~')? (c != '\\' && c != '"')? 1: 2: 3;
-		    if ((col += k) >= 78) {
-			printf("\n      ");
-			col = 6 + k;
-		    }
-		    switch (k) {
-		    case 1:
-			putchar(c);
-			break;
-		    case 2:
-			printf("\\%c", c);
-			break;
-		    case 3:
-			printf("\\%.2x", c);
-			break;
-		    }
-		}
-	    }
-	    if (hexmode) {
-		for (k = nb; k < 16; ++k)
-		    printf("   ");
-		printf("  ");
-		for (k = 0; k < nb; ++k) {
-		    c2 = buf[k];
-		    putchar((' ' <= c2 && c2 <= '~')? c2: '.');
-		}
-	    } else
-		putchar('"');
-	    printf("\n");
-	    break;
-	case 3:
-	case 4:
-	    printf("end %s\n", c==3? "send": "recv");
-	    break;
-	case 5:
-	case 6:
-	case 7:
-	    show_time(f, c);
-	    break;
-	default:
-	    printf("?%.2x\n");
-	}
-    }
-}
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
-	0x0000,	0x1189,	0x2312,	0x329b,	0x4624,	0x57ad,	0x6536,	0x74bf,
-	0x8c48,	0x9dc1,	0xaf5a,	0xbed3,	0xca6c,	0xdbe5,	0xe97e,	0xf8f7,
-	0x1081,	0x0108,	0x3393,	0x221a,	0x56a5,	0x472c,	0x75b7,	0x643e,
-	0x9cc9,	0x8d40,	0xbfdb,	0xae52,	0xdaed,	0xcb64,	0xf9ff,	0xe876,
-	0x2102,	0x308b,	0x0210,	0x1399,	0x6726,	0x76af,	0x4434,	0x55bd,
-	0xad4a,	0xbcc3,	0x8e58,	0x9fd1,	0xeb6e,	0xfae7,	0xc87c,	0xd9f5,
-	0x3183,	0x200a,	0x1291,	0x0318,	0x77a7,	0x662e,	0x54b5,	0x453c,
-	0xbdcb,	0xac42,	0x9ed9,	0x8f50,	0xfbef,	0xea66,	0xd8fd,	0xc974,
-	0x4204,	0x538d,	0x6116,	0x709f,	0x0420,	0x15a9,	0x2732,	0x36bb,
-	0xce4c,	0xdfc5,	0xed5e,	0xfcd7,	0x8868,	0x99e1,	0xab7a,	0xbaf3,
-	0x5285,	0x430c,	0x7197,	0x601e,	0x14a1,	0x0528,	0x37b3,	0x263a,
-	0xdecd,	0xcf44,	0xfddf,	0xec56,	0x98e9,	0x8960,	0xbbfb,	0xaa72,
-	0x6306,	0x728f,	0x4014,	0x519d,	0x2522,	0x34ab,	0x0630,	0x17b9,
-	0xef4e,	0xfec7,	0xcc5c,	0xddd5,	0xa96a,	0xb8e3,	0x8a78,	0x9bf1,
-	0x7387,	0x620e,	0x5095,	0x411c,	0x35a3,	0x242a,	0x16b1,	0x0738,
-	0xffcf,	0xee46,	0xdcdd,	0xcd54,	0xb9eb,	0xa862,	0x9af9,	0x8b70,
-	0x8408,	0x9581,	0xa71a,	0xb693,	0xc22c,	0xd3a5,	0xe13e,	0xf0b7,
-	0x0840,	0x19c9,	0x2b52,	0x3adb,	0x4e64,	0x5fed,	0x6d76,	0x7cff,
-	0x9489,	0x8500,	0xb79b,	0xa612,	0xd2ad,	0xc324,	0xf1bf,	0xe036,
-	0x18c1,	0x0948,	0x3bd3,	0x2a5a,	0x5ee5,	0x4f6c,	0x7df7,	0x6c7e,
-	0xa50a,	0xb483,	0x8618,	0x9791,	0xe32e,	0xf2a7,	0xc03c,	0xd1b5,
-	0x2942,	0x38cb,	0x0a50,	0x1bd9,	0x6f66,	0x7eef,	0x4c74,	0x5dfd,
-	0xb58b,	0xa402,	0x9699,	0x8710,	0xf3af,	0xe226,	0xd0bd,	0xc134,
-	0x39c3,	0x284a,	0x1ad1,	0x0b58,	0x7fe7,	0x6e6e,	0x5cf5,	0x4d7c,
-	0xc60c,	0xd785,	0xe51e,	0xf497,	0x8028,	0x91a1,	0xa33a,	0xb2b3,
-	0x4a44,	0x5bcd,	0x6956,	0x78df,	0x0c60,	0x1de9,	0x2f72,	0x3efb,
-	0xd68d,	0xc704,	0xf59f,	0xe416,	0x90a9,	0x8120,	0xb3bb,	0xa232,
-	0x5ac5,	0x4b4c,	0x79d7,	0x685e,	0x1ce1,	0x0d68,	0x3ff3,	0x2e7a,
-	0xe70e,	0xf687,	0xc41c,	0xd595,	0xa12a,	0xb0a3,	0x8238,	0x93b1,
-	0x6b46,	0x7acf,	0x4854,	0x59dd,	0x2d62,	0x3ceb,	0x0e70,	0x1ff9,
-	0xf78f,	0xe606,	0xd49d,	0xc514,	0xb1ab,	0xa022,	0x92b9,	0x8330,
-	0x7bc7,	0x6a4e,	0x58d5,	0x495c,	0x3de3,	0x2c6a,	0x1ef1,	0x0f78
-};
-
-struct pkt {
-    int	cnt;
-    int	esc;
-    int	flags;
-    struct compressor *comp;
-    void *state;
-    unsigned char buf[8192];
-} spkt, rpkt;
-
-/* Values for flags */
-#define CCP_ISUP	1
-#define CCP_ERROR	2
-#define CCP_FATALERROR	4
-#define CCP_ERR		(CCP_ERROR | CCP_FATALERROR)
-#define CCP_DECOMP_RUN	8
-
-unsigned char dbuf[8192];
-
-dumpppp(f)
-    FILE *f;
-{
-    int c, n, k;
-    int nb, nl, dn, proto, rv;
-    char *dir, *q;
-    unsigned char *p, *r, *endp;
-    unsigned char *d;
-    unsigned short fcs;
-    struct pkt *pkt;
-
-    spkt.cnt = rpkt.cnt = 0;
-    spkt.esc = rpkt.esc = 0;
-    while ((c = getc(f)) != EOF) {
-	switch (c) {
-	case 1:
-	case 2:
-	    if (reverse)
-		c = 3 - c;
-	    dir = c==1? "sent": "rcvd";
-	    pkt = c==1? &spkt: &rpkt;
-	    n = getc(f);
-	    n = (n << 8) + getc(f);
-	    *(c==1? &tot_sent: &tot_rcvd) += n;
-	    for (; n > 0; --n) {
-		c = getc(f);
-		switch (c) {
-		case EOF:
-		    printf("\nEOF\n");
-		    if (spkt.cnt > 0)
-			printf("[%d bytes in incomplete send packet]\n",
-			       spkt.cnt);
-		    if (rpkt.cnt > 0)
-			printf("[%d bytes in incomplete recv packet]\n",
-			       rpkt.cnt);
-		    exit(0);
-		case '~':
-		    if (pkt->cnt > 0) {
-			q = dir;
-			if (pkt->esc) {
-			    printf("%s aborted packet:\n     ", dir);
-			    q = "    ";
-			}
-			nb = pkt->cnt;
-			p = pkt->buf;
-			pkt->cnt = 0;
-			pkt->esc = 0;
-			if (nb <= 2) {
-			    printf("%s short packet [%d bytes]:", q, nb);
-			    for (k = 0; k < nb; ++k)
-				printf(" %.2x", p[k]);
-			    printf("\n");
-			    break;
-			}
-			fcs = PPP_INITFCS;
-			for (k = 0; k < nb; ++k)
-			    fcs = PPP_FCS(fcs, p[k]);
-			fcs &= 0xFFFF;
-			nb -= 2;
-			endp = p + nb;
-			r = p;
-			if (r[0] == 0xff && r[1] == 3)
-			    r += 2;
-			if ((r[0] & 1) == 0)
-			    ++r;
-			++r;
-			if (endp - r > mru)
-			    printf("     ERROR: length (%d) > MRU (%d)\n",
-				   endp - r, mru);
-			if (decompress && fcs == PPP_GOODFCS) {
-			    /* See if this is a CCP or compressed packet */
-			    d = dbuf;
-			    r = p;
-			    if (r[0] == 0xff && r[1] == 3) {
-				*d++ = *r++;
-				*d++ = *r++;
-			    }
-			    proto = r[0];
-			    if ((proto & 1) == 0)
-				proto = (proto << 8) + r[1];
-			    if (proto == PPP_CCP) {
-				handle_ccp(pkt, r + 2, endp - r - 2);
-			    } else if (proto == PPP_COMP) {
-				if ((pkt->flags & CCP_ISUP)
-				    && (pkt->flags & CCP_DECOMP_RUN)
-				    && pkt->state
-				    && (pkt->flags & CCP_ERR) == 0) {
-				    rv = pkt->comp->decompress(pkt->state, r,
-							endp - r, d, &dn);
-				    switch (rv) {
-				    case DECOMP_OK:
-					p = dbuf;
-					nb = d + dn - p;
-					if ((d[0] & 1) == 0)
-					    --dn;
-					--dn;
-					if (dn > mru)
-					    printf("     ERROR: decompressed length (%d) > MRU (%d)\n", dn, mru);
-					break;
-				    case DECOMP_ERROR:
-					printf("     DECOMPRESSION ERROR\n");
-					pkt->flags |= CCP_ERROR;
-					break;
-				    case DECOMP_FATALERROR:
-					printf("     FATAL DECOMPRESSION ERROR\n");
-					pkt->flags |= CCP_FATALERROR;
-					break;
-				    }
-				}
-			    } else if (pkt->state
-				       && (pkt->flags & CCP_DECOMP_RUN)) {
-				pkt->comp->incomp(pkt->state, r, endp - r);
-			    }
-			}
-			do {
-			    nl = nb < 16? nb: 16;
-			    printf("%s ", q);
-			    for (k = 0; k < nl; ++k)
-				printf(" %.2x", p[k]);
-			    for (; k < 16; ++k)
-				printf("   ");
-			    printf("  ");
-			    for (k = 0; k < nl; ++k) {
-				c = p[k];
-				putchar((' ' <= c && c <= '~')? c: '.');
-			    }
-			    printf("\n");
-			    q = "    ";
-			    p += nl;
-			    nb -= nl;
-			} while (nb > 0);
-			if (fcs != PPP_GOODFCS)
-			    printf("     BAD FCS: (residue = %x)\n", fcs);
-		    }
-		    break;
-		case '}':
-		    if (!pkt->esc) {
-			pkt->esc = 1;
-			break;
-		    }
-		    /* else fall through */
-		default:
-		    if (pkt->esc) {
-			c ^= 0x20;
-			pkt->esc = 0;
-		    }
-		    pkt->buf[pkt->cnt++] = c;
-		    break;
-		}
-	    }
-	    break;
-	case 3:
-	case 4:
-	    if (reverse)
-		c = 7 - c;
-	    dir = c==3? "send": "recv";
-	    pkt = c==3? &spkt: &rpkt;
-	    printf("end %s", dir);
-	    if (pkt->cnt > 0)
-		printf("  [%d bytes in incomplete packet]", pkt->cnt);
-	    printf("\n");
-	    break;
-	case 5:
-	case 6:
-	case 7:
-	    show_time(f, c);
-	    break;
-	default:
-	    printf("?%.2x\n");
-	}
-    }
-}
-
-extern struct compressor ppp_bsd_compress, ppp_deflate;
-
-struct compressor *compressors[] = {
-#if DO_BSD_COMPRESS
-    &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
-    &ppp_deflate,
-#endif
-    NULL
-};
-
-handle_ccp(cp, dp, len)
-    struct pkt *cp;
-    u_char *dp;
-    int len;
-{
-    int clen;
-    struct compressor **comp;
-
-    if (len < CCP_HDRLEN)
-	return;
-    clen = CCP_LENGTH(dp);
-    if (clen > len)
-	return;
-
-    switch (CCP_CODE(dp)) {
-    case CCP_CONFACK:
-	cp->flags &= ~(CCP_DECOMP_RUN | CCP_ISUP);
-	if (clen < CCP_HDRLEN + CCP_OPT_MINLEN
-	    || clen < CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN))
-	    break;
-	dp += CCP_HDRLEN;
-	clen -= CCP_HDRLEN;
-	for (comp = compressors; *comp != NULL; ++comp) {
-	    if ((*comp)->compress_proto == dp[0]) {
-		if (cp->state != NULL) {
-		    (*cp->comp->decomp_free)(cp->state);
-		    cp->state = NULL;
-		}
-		cp->comp = *comp;
-		cp->state = (*comp)->decomp_alloc(dp, CCP_OPT_LENGTH(dp));
-		cp->flags |= CCP_ISUP;
-		if (cp->state != NULL
-		    && (*cp->comp->decomp_init)
-		        (cp->state, dp, clen, 0, 0, 8192, 1))
-		    cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
-		break;
-	    }
-	}
-	break;
-
-    case CCP_CONFNAK:
-    case CCP_CONFREJ:
-	cp->flags &= ~(CCP_DECOMP_RUN | CCP_ISUP);
-	break;
-
-    case CCP_RESETACK:
-	if (cp->flags & CCP_ISUP) {
-	    if (cp->state && (cp->flags & CCP_DECOMP_RUN)) {
-		(*cp->comp->decomp_reset)(cp->state);
-		cp->flags &= ~CCP_ERROR;
-	    }
-	}
-	break;
-    }
-}
-
-show_time(f, c)
-    FILE *f;
-    int c;
-{
-    time_t t;
-    int n;
-    struct tm *tm;
-
-    if (c == 7) {
-	t = getc(f);
-	t = (t << 8) + getc(f);
-	t = (t << 8) + getc(f);
-	t = (t << 8) + getc(f);
-	printf("start %s", ctime(&t));
-	start_time = t;
-	start_time_tenths = 0;
-	tot_sent = tot_rcvd = 0;
-    } else {
-	n = getc(f);
-	if (c == 5) {
-	    for (c = 3; c > 0; --c)
-		n = (n << 8) + getc(f);
-	}
-	if (abs_times) {
-	    n += start_time_tenths;
-	    start_time += n / 10;
-	    start_time_tenths = n % 10;
-	    tm = localtime(&start_time);
-	    printf("time  %.2d:%.2d:%.2d.%d", tm->tm_hour, tm->tm_min,
-		   tm->tm_sec, start_time_tenths);
-	    printf("  (sent %d, rcvd %d)\n", tot_sent, tot_rcvd);
-	} else
-	    printf("time  %.1fs\n", (double) n / 10);
-    }
-}
diff --git a/mdk-stage1/ppp/pppdump/zlib.c b/mdk-stage1/ppp/pppdump/zlib.c
deleted file mode 100644
index 5b8372719..000000000
--- a/mdk-stage1/ppp/pppdump/zlib.c
+++ /dev/null
@@ -1,4614 +0,0 @@
-/*
- * This file is derived from various .h and .c files from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.  See zlib.h for conditions of
- * distribution and use.
- *
- * Changes that have been made include:
- * - changed functions not used outside this file to "local"
- * - added minCompression parameter to deflateInit2
- * - added Z_PACKET_FLUSH (see zlib.h for details)
- * - added inflateIncomp
- *
- * $Id$
- */
-
-
-/*+++++*/
-/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* From: zutil.h,v 1.9 1995/05/03 17:27:12 jloup Exp */
-
-#define _Z_UTIL_H
-
-#include "zlib.h"
-
-#ifdef STDC
-#  include <string.h>
-#endif
-
-#ifndef local
-#  define local static
-#endif
-/* compile with -Dlocal if your debugger can't find static symbols */
-
-#define FAR
-
-typedef unsigned char  uch;
-typedef uch FAR uchf;
-typedef unsigned short ush;
-typedef ush FAR ushf;
-typedef unsigned long  ulg;
-
-extern char *z_errmsg[]; /* indexed by 1-zlib_error */
-
-#define ERR_RETURN(strm,err) return (strm->msg=z_errmsg[1-err], err)
-/* To be used only when the state is known to be valid */
-
-#ifndef NULL
-#define NULL	((void *) 0)
-#endif
-
-        /* common constants */
-
-#define DEFLATED   8
-
-#ifndef DEF_WBITS
-#  define DEF_WBITS MAX_WBITS
-#endif
-/* default windowBits for decompression. MAX_WBITS is for compression only */
-
-#if MAX_MEM_LEVEL >= 8
-#  define DEF_MEM_LEVEL 8
-#else
-#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
-#endif
-/* default memLevel */
-
-#define STORED_BLOCK 0
-#define STATIC_TREES 1
-#define DYN_TREES    2
-/* The three kinds of block type */
-
-#define MIN_MATCH  3
-#define MAX_MATCH  258
-/* The minimum and maximum match lengths */
-
-         /* functions */
-
-#if defined(STDC) && !defined(HAVE_MEMCPY) && !defined(NO_MEMCPY)
-#  define HAVE_MEMCPY
-#endif
-#ifdef HAVE_MEMCPY
-#  define zmemcpy memcpy
-#  define zmemzero(dest, len) memset(dest, 0, len)
-#else
-#  define zmemcpy(d, s, n)	bcopy((s), (d), (n))
-#  define zmemzero		bzero
-#endif
-
-/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
-#  include <stdio.h>
-#  ifndef verbose
-#    define verbose 0
-#  endif
-#  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-#  define Assert(cond,msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
-#endif
-
-
-typedef uLong (*check_func) OF((uLong check, Bytef *buf, uInt len));
-
-/* voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size)); */
-/* void   zcfree  OF((voidpf opaque, voidpf ptr)); */
-
-#define ZALLOC(strm, items, size) \
-           (*((strm)->zalloc))((strm)->opaque, (items), (size))
-#define ZFREE(strm, addr, size)	\
-	   (*((strm)->zfree))((strm)->opaque, (voidpf)(addr), (size))
-#define TRY_FREE(s, p, n) {if (p) ZFREE(s, p, n);}
-
-/* deflate.h -- internal compression state
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-
-/*+++++*/
-/* From: deflate.h,v 1.5 1995/05/03 17:27:09 jloup Exp */
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-/* Data type */
-#define BINARY  0
-#define ASCII   1
-#define UNKNOWN 2
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE    42
-#define BUSY_STATE   113
-#define FLUSH_STATE  124
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct deflate_state {
-    z_stream *strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    int   pending;       /* nb of bytes in the pending buffer */
-    uLong adler;         /* adler32 of uncompressed data */
-    int   noheader;      /* suppress zlib header and adler32 */
-    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
-    Byte  method;        /* STORED (for zip only) or DEFLATED */
-    int	  minCompr;	 /* min size decrease for Z_FLUSH_NOSTORE */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-     int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    ulg compressed_len; /* total bit length of compressed file */
-    uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
-
-#ifdef DEBUG_ZLIB
-    ulg bits_sent;      /* bit length of the compressed data */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-    uInt blocks_in_packet;
-    /* Number of blocks produced since the last time Z_PACKET_FLUSH
-     * was used.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-        /* in trees.c */
-local void ct_init       OF((deflate_state *s));
-local int  ct_tally      OF((deflate_state *s, int dist, int lc));
-local ulg ct_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
-			     int flush));
-local void ct_align      OF((deflate_state *s));
-local void ct_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int eof));
-local void ct_stored_type_only OF((deflate_state *s));
-
-
-/*+++++*/
-/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process depends on being able to identify portions
- *      of the input text which are identical to earlier input (within a
- *      sliding window trailing behind the input currently being processed).
- *
- *      The most straightforward technique turns out to be the fastest for
- *      most input files: try all possible matches and select the longest.
- *      The key feature of this algorithm is that insertions into the string
- *      dictionary are very simple and thus fast, and deletions are avoided
- *      completely. Insertions are performed at each input character, whereas
- *      string matches are performed only when the previous match ends. So it
- *      is preferable to spend more time in matches to allow very fast string
- *      insertions and avoid deletions. The matching algorithm for small
- *      strings is inspired from that of Rabin & Karp. A brute force approach
- *      is used to find longer strings when a small match has been found.
- *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
- *      (by Leonid Broukhis).
- *         A previous version of this file used a more sophisticated algorithm
- *      (by Fiala and Greene) which is guaranteed to run in linear amortized
- *      time, but has a larger average cost, uses more memory and is patented.
- *      However the F&G algorithm may be faster for some highly redundant
- *      files if the parameter max_chain_length (described below) is too large.
- *
- *  ACKNOWLEDGEMENTS
- *
- *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
- *      I found it in 'freeze' written by Leonid Broukhis.
- *      Thanks to many people for bug reports and testing.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      A description of the Rabin and Karp algorithm is given in the book
- *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
- *
- *      Fiala,E.R., and Greene,D.H.
- *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
- *
- */
-
-/* From: deflate.c,v 1.8 1995/05/03 17:27:08 jloup Exp */
-
-local char zlib_copyright[] = " deflate Copyright 1995 Jean-loup Gailly ";
-/*
-  If you use the zlib library in a product, an acknowledgment is welcome
-  in the documentation of your product. If for some reason you cannot
-  include such an acknowledgment, I would appreciate that you keep this
-  copyright string in the executable of your product.
- */
-
-#define NIL 0
-/* Tail of hash chains */
-
-#ifndef TOO_FAR
-#  define TOO_FAR 4096
-#endif
-/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-/* Values for max_lazy_match, good_match and max_chain_length, depending on
- * the desired pack level (0..9). The values given below have been tuned to
- * exclude worst case performance for pathological files. Better values may be
- * found for specific files.
- */
-
-typedef struct config_s {
-   ush good_length; /* reduce lazy search above this match length */
-   ush max_lazy;    /* do not perform lazy search above this match length */
-   ush nice_length; /* quit search above this match length */
-   ush max_chain;
-} config;
-
-local config configuration_table[10] = {
-/*      good lazy nice chain */
-/* 0 */ {0,    0,  0,    0},  /* store only */
-/* 1 */ {4,    4,  8,    4},  /* maximum speed, no lazy matches */
-/* 2 */ {4,    5, 16,    8},
-/* 3 */ {4,    6, 32,   32},
-
-/* 4 */ {4,    4, 16,   16},  /* lazy matches */
-/* 5 */ {8,   16, 32,   32},
-/* 6 */ {8,   16, 128, 128},
-/* 7 */ {8,   32, 128, 256},
-/* 8 */ {32, 128, 258, 1024},
-/* 9 */ {32, 258, 258, 4096}}; /* maximum compression */
-
-/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
- * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
- * meaning.
- */
-
-#define EQUAL 0
-/* result of memcmp for equal strings */
-
-/* ===========================================================================
- *  Prototypes for local functions.
- */
-
-local void fill_window   OF((deflate_state *s));
-local int  deflate_fast  OF((deflate_state *s, int flush));
-local int  deflate_slow  OF((deflate_state *s, int flush));
-local void lm_init       OF((deflate_state *s));
-local int longest_match  OF((deflate_state *s, IPos cur_match));
-local void putShortMSB   OF((deflate_state *s, uInt b));
-local void flush_pending OF((z_stream *strm));
-local int read_buf       OF((z_stream *strm, charf *buf, unsigned size));
-#ifdef ASMV
-      void match_init OF((void)); /* asm code initialization */
-#endif
-
-#ifdef DEBUG_ZLIB
-local  void check_match OF((deflate_state *s, IPos start, IPos match,
-                            int length));
-#endif
-
-
-/* ===========================================================================
- * Update a hash value with the given input byte
- * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
- *    input characters, so that a running hash key can be computed from the
- *    previous key instead of complete recalculation each time.
- */
-#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
-
-
-/* ===========================================================================
- * Insert string str in the dictionary and set match_head to the previous head
- * of the hash chain (the most recent string with same hash key). Return
- * the previous length of the hash chain.
- * IN  assertion: all calls to to INSERT_STRING are made with consecutive
- *    input characters and the first MIN_MATCH bytes of str are valid
- *    (except for the last MIN_MATCH-1 bytes of the input file).
- */
-#define INSERT_STRING(s, str, match_head) \
-   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
-    s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (str))
-
-/* ===========================================================================
- * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
- * prev[] will be initialized on the fly.
- */
-#define CLEAR_HASH(s) \
-    s->head[s->hash_size-1] = NIL; \
-    zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
-
-/* ========================================================================= */
-int deflateInit (strm, level)
-    z_stream *strm;
-    int level;
-{
-    return deflateInit2 (strm, level, DEFLATED, MAX_WBITS, DEF_MEM_LEVEL,
-			 0, 0);
-    /* To do: ignore strm->next_in if we use it as window */
-}
-
-/* ========================================================================= */
-int deflateInit2 (strm, level, method, windowBits, memLevel,
-		  strategy, minCompression)
-    z_stream *strm;
-    int  level;
-    int  method;
-    int  windowBits;
-    int  memLevel;
-    int  strategy;
-    int  minCompression;
-{
-    deflate_state *s;
-    int noheader = 0;
-
-    if (strm == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->msg = Z_NULL;
-/*    if (strm->zalloc == Z_NULL) strm->zalloc = zcalloc; */
-/*    if (strm->zfree == Z_NULL) strm->zfree = zcfree; */
-
-    if (level == Z_DEFAULT_COMPRESSION) level = 6;
-
-    if (windowBits < 0) { /* undocumented feature: suppress zlib header */
-        noheader = 1;
-        windowBits = -windowBits;
-    }
-    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 1 || level > 9) {
-        return Z_STREAM_ERROR;
-    }
-    s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state));
-    if (s == Z_NULL) return Z_MEM_ERROR;
-    strm->state = (struct internal_state FAR *)s;
-    s->strm = strm;
-
-    s->noheader = noheader;
-    s->w_bits = windowBits;
-    s->w_size = 1 << s->w_bits;
-    s->w_mask = s->w_size - 1;
-
-    s->hash_bits = memLevel + 7;
-    s->hash_size = 1 << s->hash_bits;
-    s->hash_mask = s->hash_size - 1;
-    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
-
-    s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte));
-    s->prev   = (Posf *)  ZALLOC(strm, s->w_size, sizeof(Pos));
-    s->head   = (Posf *)  ZALLOC(strm, s->hash_size, sizeof(Pos));
-
-    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
-
-    s->pending_buf = (uchf *) ZALLOC(strm, s->lit_bufsize, 2*sizeof(ush));
-
-    if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
-        s->pending_buf == Z_NULL) {
-        strm->msg = z_errmsg[1-Z_MEM_ERROR];
-        deflateEnd (strm);
-        return Z_MEM_ERROR;
-    }
-    s->d_buf = (ushf *) &(s->pending_buf[s->lit_bufsize]);
-    s->l_buf = (uchf *) &(s->pending_buf[3*s->lit_bufsize]);
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 32 bits (worst case
-     * is 15+15+13=33).
-     */
-
-    s->level = level;
-    s->strategy = strategy;
-    s->method = (Byte)method;
-    s->minCompr = minCompression;
-    s->blocks_in_packet = 0;
-
-    return deflateReset(strm);
-}
-
-/* ========================================================================= */
-int deflateReset (strm)
-    z_stream *strm;
-{
-    deflate_state *s;
-    
-    if (strm == Z_NULL || strm->state == Z_NULL ||
-        strm->zalloc == Z_NULL || strm->zfree == Z_NULL) return Z_STREAM_ERROR;
-
-    strm->total_in = strm->total_out = 0;
-    strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */
-    strm->data_type = Z_UNKNOWN;
-
-    s = (deflate_state *)strm->state;
-    s->pending = 0;
-    s->pending_out = s->pending_buf;
-
-    if (s->noheader < 0) {
-        s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
-    }
-    s->status = s->noheader ? BUSY_STATE : INIT_STATE;
-    s->adler = 1;
-
-    ct_init(s);
-    lm_init(s);
-
-    return Z_OK;
-}
-
-/* =========================================================================
- * Put a short in the pending buffer. The 16-bit value is put in MSB order.
- * IN assertion: the stream state is correct and there is enough room in
- * pending_buf.
- */
-local void putShortMSB (s, b)
-    deflate_state *s;
-    uInt b;
-{
-    put_byte(s, (Byte)(b >> 8));
-    put_byte(s, (Byte)(b & 0xff));
-}   
-
-/* =========================================================================
- * Flush as much pending output as possible.
- */
-local void flush_pending(strm)
-    z_stream *strm;
-{
-    deflate_state *state = (deflate_state *) strm->state;
-    unsigned len = state->pending;
-
-    if (len > strm->avail_out) len = strm->avail_out;
-    if (len == 0) return;
-
-    if (strm->next_out != NULL) {
-	zmemcpy(strm->next_out, state->pending_out, len);
-	strm->next_out += len;
-    }
-    state->pending_out += len;
-    strm->total_out += len;
-    strm->avail_out -= len;
-    state->pending -= len;
-    if (state->pending == 0) {
-        state->pending_out = state->pending_buf;
-    }
-}
-
-/* ========================================================================= */
-int deflate (strm, flush)
-    z_stream *strm;
-    int flush;
-{
-    deflate_state *state = (deflate_state *) strm->state;
-
-    if (strm == Z_NULL || state == Z_NULL) return Z_STREAM_ERROR;
-    
-    if (strm->next_in == Z_NULL && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_STREAM_ERROR);
-    }
-    if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR);
-
-    state->strm = strm; /* just in case */
-
-    /* Write the zlib header */
-    if (state->status == INIT_STATE) {
-
-        uInt header = (DEFLATED + ((state->w_bits-8)<<4)) << 8;
-        uInt level_flags = (state->level-1) >> 1;
-
-        if (level_flags > 3) level_flags = 3;
-        header |= (level_flags << 6);
-        header += 31 - (header % 31);
-
-        state->status = BUSY_STATE;
-        putShortMSB(state, header);
-    }
-
-    /* Flush as much pending output as possible */
-    if (state->pending != 0) {
-        flush_pending(strm);
-        if (strm->avail_out == 0) return Z_OK;
-    }
-
-    /* If we came back in here to get the last output from
-     * a previous flush, we're done for now.
-     */
-    if (state->status == FLUSH_STATE) {
-	state->status = BUSY_STATE;
-	if (flush != Z_NO_FLUSH && flush != Z_FINISH)
-	    return Z_OK;
-    }
-
-    /* User must not provide more input after the first FINISH: */
-    if (state->status == FINISH_STATE && strm->avail_in != 0) {
-        ERR_RETURN(strm, Z_BUF_ERROR);
-    }
-
-    /* Start a new block or continue the current one.
-     */
-    if (strm->avail_in != 0 || state->lookahead != 0 ||
-        (flush == Z_FINISH && state->status != FINISH_STATE)) {
-        int quit;
-
-        if (flush == Z_FINISH) {
-            state->status = FINISH_STATE;
-        }
-        if (state->level <= 3) {
-            quit = deflate_fast(state, flush);
-        } else {
-            quit = deflate_slow(state, flush);
-        }
-        if (quit || strm->avail_out == 0)
-	    return Z_OK;
-        /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-         * of deflate should use the same flush parameter to make sure
-         * that the flush is complete. So we don't have to output an
-         * empty block here, this will be done at next call. This also
-         * ensures that for a very small output buffer, we emit at most
-         * one empty block.
-         */
-    }
-
-    /* If a flush was requested, we have a little more to output now. */
-    if (flush != Z_NO_FLUSH && flush != Z_FINISH
-	&& state->status != FINISH_STATE) {
-	switch (flush) {
-	case Z_PARTIAL_FLUSH:
-	    ct_align(state);
-	    break;
-	case Z_PACKET_FLUSH:
-	    /* Output just the 3-bit `stored' block type value,
-	       but not a zero length. */
-	    ct_stored_type_only(state);
-	    break;
-	default:
-	    ct_stored_block(state, (char*)0, 0L, 0);
-	    /* For a full flush, this empty block will be recognized
-	     * as a special marker by inflate_sync().
-	     */
-	    if (flush == Z_FULL_FLUSH) {
-		CLEAR_HASH(state);             /* forget history */
-	    }
-	}
-	flush_pending(strm);
-	if (strm->avail_out == 0) {
-	    /* We'll have to come back to get the rest of the output;
-	     * this ensures we don't output a second zero-length stored
-	     * block (or whatever).
-	     */
-	    state->status = FLUSH_STATE;
-	    return Z_OK;
-	}
-    }
-
-    Assert(strm->avail_out > 0, "bug2");
-
-    if (flush != Z_FINISH) return Z_OK;
-    if (state->noheader) return Z_STREAM_END;
-
-    /* Write the zlib trailer (adler32) */
-    putShortMSB(state, (uInt)(state->adler >> 16));
-    putShortMSB(state, (uInt)(state->adler & 0xffff));
-    flush_pending(strm);
-    /* If avail_out is zero, the application will call deflate again
-     * to flush the rest.
-     */
-    state->noheader = -1; /* write the trailer only once! */
-    return state->pending != 0 ? Z_OK : Z_STREAM_END;
-}
-
-/* ========================================================================= */
-int deflateEnd (strm)
-    z_stream *strm;
-{
-    deflate_state *state = (deflate_state *) strm->state;
-
-    if (strm == Z_NULL || state == Z_NULL) return Z_STREAM_ERROR;
-
-    TRY_FREE(strm, state->window, state->w_size * 2 * sizeof(Byte));
-    TRY_FREE(strm, state->prev, state->w_size * sizeof(Pos));
-    TRY_FREE(strm, state->head, state->hash_size * sizeof(Pos));
-    TRY_FREE(strm, state->pending_buf, state->lit_bufsize * 2 * sizeof(ush));
-
-    ZFREE(strm, state, sizeof(deflate_state));
-    strm->state = Z_NULL;
-
-    return Z_OK;
-}
-
-/* ===========================================================================
- * Read a new buffer from the current input stream, update the adler32
- * and total number of bytes read.
- */
-local int read_buf(strm, buf, size)
-    z_stream *strm;
-    charf *buf;
-    unsigned size;
-{
-    unsigned len = strm->avail_in;
-    deflate_state *state = (deflate_state *) strm->state;
-
-    if (len > size) len = size;
-    if (len == 0) return 0;
-
-    strm->avail_in  -= len;
-
-    if (!state->noheader) {
-        state->adler = adler32(state->adler, strm->next_in, len);
-    }
-    zmemcpy(buf, strm->next_in, len);
-    strm->next_in  += len;
-    strm->total_in += len;
-
-    return (int)len;
-}
-
-/* ===========================================================================
- * Initialize the "longest match" routines for a new zlib stream
- */
-local void lm_init (s)
-    deflate_state *s;
-{
-    s->window_size = (ulg)2L*s->w_size;
-
-    CLEAR_HASH(s);
-
-    /* Set the default configuration parameters:
-     */
-    s->max_lazy_match   = configuration_table[s->level].max_lazy;
-    s->good_match       = configuration_table[s->level].good_length;
-    s->nice_match       = configuration_table[s->level].nice_length;
-    s->max_chain_length = configuration_table[s->level].max_chain;
-
-    s->strstart = 0;
-    s->block_start = 0L;
-    s->lookahead = 0;
-    s->match_length = MIN_MATCH-1;
-    s->match_available = 0;
-    s->ins_h = 0;
-#ifdef ASMV
-    match_init(); /* initialize the asm code */
-#endif
-}
-
-/* ===========================================================================
- * Set match_start to the longest match starting at the given string and
- * return its length. Matches shorter or equal to prev_length are discarded,
- * in which case the result is equal to prev_length and match_start is
- * garbage.
- * IN assertions: cur_match is the head of the hash chain for the current
- *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
- */
-#ifndef ASMV
-/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
- * match.S. The code will be functionally equivalent.
- */
-local int longest_match(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= s->nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    return best_len;
-}
-#endif /* ASMV */
-
-#ifdef DEBUG_ZLIB
-/* ===========================================================================
- * Check that the match at match_start is indeed a match.
- */
-local void check_match(s, start, match, length)
-    deflate_state *s;
-    IPos start, match;
-    int length;
-{
-    /* check that the match is indeed a match */
-    if (memcmp((charf *)s->window + match,
-                (charf *)s->window + start, length) != EQUAL) {
-        fprintf(stderr,
-            " start %u, match %u, length %d\n",
-            start, match, length);
-        do { fprintf(stderr, "%c%c", s->window[match++],
-                     s->window[start++]); } while (--length != 0);
-        z_error("invalid match");
-    }
-    if (verbose > 1) {
-        fprintf(stderr,"\\[%d,%d]", start-match, length);
-        do { putc(s->window[start++], stderr); } while (--length != 0);
-    }
-}
-#else
-#  define check_match(s, start, match, length)
-#endif
-
-/* ===========================================================================
- * Fill the window when the lookahead becomes insufficient.
- * Updates strstart and lookahead.
- *
- * IN assertion: lookahead < MIN_LOOKAHEAD
- * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
- *    At least one byte has been read, or avail_in == 0; reads are
- *    performed for at least two bytes (required for the zip translate_eol
- *    option -- not supported here).
- */
-local void fill_window(s)
-    deflate_state *s;
-{
-    register unsigned n, m;
-    register Posf *p;
-    unsigned more;    /* Amount of free space at the end of the window. */
-    uInt wsize = s->w_size;
-
-    do {
-        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
-
-        /* Deal with !@#$% 64K limit: */
-        if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
-            more = wsize;
-        } else if (more == (unsigned)(-1)) {
-            /* Very unlikely, but possible on 16 bit machine if strstart == 0
-             * and lookahead == 1 (input done one byte at time)
-             */
-            more--;
-
-        /* If the window is almost full and there is insufficient lookahead,
-         * move the upper half to the lower one to make room in the upper half.
-         */
-        } else if (s->strstart >= wsize+MAX_DIST(s)) {
-
-            /* By the IN assertion, the window is not empty so we can't confuse
-             * more == 0 with more == 64K on a 16 bit machine.
-             */
-            zmemcpy((charf *)s->window, (charf *)s->window+wsize,
-                   (unsigned)wsize);
-            s->match_start -= wsize;
-            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-
-            s->block_start -= (long) wsize;
-
-            /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage):
-             */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
-
-            more += wsize;
-        }
-        if (s->strm->avail_in == 0) return;
-
-        /* If there was no sliding:
-         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
-         *    more == window_size - lookahead - strstart
-         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
-         * => more >= window_size - 2*WSIZE + 2
-         * In the BIG_MEM or MMAP case (not yet supported),
-         *   window_size == input_size + MIN_LOOKAHEAD  &&
-         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
-         * Otherwise, window_size == 2*WSIZE so more >= 2.
-         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
-         */
-        Assert(more >= 2, "more < 2");
-
-        n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
-                     more);
-        s->lookahead += n;
-
-        /* Initialize the hash value now that we have some input: */
-        if (s->lookahead >= MIN_MATCH) {
-            s->ins_h = s->window[s->strstart];
-            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-            Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-        }
-        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
-         * but this is not important since only literal bytes will be emitted.
-         */
-
-    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
-}
-
-/* ===========================================================================
- * Flush the current block, with given end-of-file flag.
- * IN assertion: strstart is set to the end of the current match.
- */
-#define FLUSH_BLOCK_ONLY(s, flush) { \
-   ct_flush_block(s, (s->block_start >= 0L ? \
-           (charf *)&s->window[(unsigned)s->block_start] : \
-           (charf *)Z_NULL), (long)s->strstart - s->block_start, (flush)); \
-   s->block_start = s->strstart; \
-   flush_pending(s->strm); \
-   Tracev((stderr,"[FLUSH]")); \
-}
-
-/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, flush) { \
-   FLUSH_BLOCK_ONLY(s, flush); \
-   if (s->strm->avail_out == 0) return 1; \
-}
-
-/* ===========================================================================
- * Compress as much as possible from the input stream, return true if
- * processing was terminated prematurely (no more input or output space).
- * This function does not perform lazy evaluationof matches and inserts
- * new strings in the dictionary only for unmatched strings or for short
- * matches. It is used only for the fast compression options.
- */
-local int deflate_fast(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL; /* head of the hash chain */
-    int bflush;     /* set if current block must be flushed */
-
-    s->prev_length = MIN_MATCH-1;
-
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) return 1;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         * At this point we have always match_length < MIN_MATCH
-         */
-        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-
-            if (s->match_length > s->lookahead) s->match_length = s->lookahead;
-        }
-        if (s->match_length >= MIN_MATCH) {
-            check_match(s, s->strstart, s->match_start, s->match_length);
-
-            bflush = ct_tally(s, s->strstart - s->match_start,
-                              s->match_length - MIN_MATCH);
-
-            s->lookahead -= s->match_length;
-
-            /* Insert new strings in the hash table only if the match length
-             * is not too large. This saves time but degrades compression.
-             */
-            if (s->match_length <= s->max_insert_length &&
-                s->lookahead >= MIN_MATCH) {
-                s->match_length--; /* string at strstart already in hash table */
-                do {
-                    s->strstart++;
-                    INSERT_STRING(s, s->strstart, hash_head);
-                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
-                     * always MIN_MATCH bytes ahead.
-                     */
-                } while (--s->match_length != 0);
-                s->strstart++; 
-            } else {
-                s->strstart += s->match_length;
-                s->match_length = 0;
-                s->ins_h = s->window[s->strstart];
-                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
-#if MIN_MATCH != 3
-                Call UPDATE_HASH() MIN_MATCH-3 more times
-#endif
-                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
-                 * matter since it will be recomputed at next deflate call.
-                 */
-            }
-        } else {
-            /* No match, output a literal byte */
-            Tracevv((stderr,"%c", s->window[s->strstart]));
-            bflush = ct_tally (s, 0, s->window[s->strstart]);
-            s->lookahead--;
-            s->strstart++; 
-        }
-        if (bflush) FLUSH_BLOCK(s, Z_NO_FLUSH);
-    }
-    FLUSH_BLOCK(s, flush);
-    return 0; /* normal exit */
-}
-
-/* ===========================================================================
- * Same as above, but achieves better compression. We use a lazy
- * evaluation for matches: a match is finally adopted only if there is
- * no better match at the next window position.
- */
-local int deflate_slow(s, flush)
-    deflate_state *s;
-    int flush;
-{
-    IPos hash_head = NIL;    /* head of hash chain */
-    int bflush;              /* set if current block must be flushed */
-
-    /* Process the input block. */
-    for (;;) {
-        /* Make sure that we always have enough lookahead, except
-         * at the end of the input file. We need MAX_MATCH bytes
-         * for the next match, plus MIN_MATCH bytes to insert the
-         * string following the next match.
-         */
-        if (s->lookahead < MIN_LOOKAHEAD) {
-            fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) return 1;
-
-            if (s->lookahead == 0) break; /* flush the current block */
-        }
-
-        /* Insert the string window[strstart .. strstart+2] in the
-         * dictionary, and set hash_head to the head of the hash chain:
-         */
-        if (s->lookahead >= MIN_MATCH) {
-            INSERT_STRING(s, s->strstart, hash_head);
-        }
-
-        /* Find the longest match, discarding those <= prev_length.
-         */
-        s->prev_length = s->match_length, s->prev_match = s->match_start;
-        s->match_length = MIN_MATCH-1;
-
-        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
-            s->strstart - hash_head <= MAX_DIST(s)) {
-            /* To simplify the code, we prevent matches with the string
-             * of window index 0 (in particular we have to avoid a match
-             * of the string with itself at the start of the input file).
-             */
-            if (s->strategy != Z_HUFFMAN_ONLY) {
-                s->match_length = longest_match (s, hash_head);
-            }
-            /* longest_match() sets match_start */
-            if (s->match_length > s->lookahead) s->match_length = s->lookahead;
-
-            if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
-                 (s->match_length == MIN_MATCH &&
-                  s->strstart - s->match_start > TOO_FAR))) {
-
-                /* If prev_match is also MIN_MATCH, match_start is garbage
-                 * but we will ignore the current match anyway.
-                 */
-                s->match_length = MIN_MATCH-1;
-            }
-        }
-        /* If there was a match at the previous step and the current
-         * match is not better, output the previous match:
-         */
-        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
-            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
-            /* Do not insert strings in hash table beyond this. */
-
-            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
-
-            bflush = ct_tally(s, s->strstart -1 - s->prev_match,
-                              s->prev_length - MIN_MATCH);
-
-            /* Insert in hash table all strings up to the end of the match.
-             * strstart-1 and strstart are already inserted. If there is not
-             * enough lookahead, the last two strings are not inserted in
-             * the hash table.
-             */
-            s->lookahead -= s->prev_length-1;
-            s->prev_length -= 2;
-            do {
-                if (++s->strstart <= max_insert) {
-                    INSERT_STRING(s, s->strstart, hash_head);
-                }
-            } while (--s->prev_length != 0);
-            s->match_available = 0;
-            s->match_length = MIN_MATCH-1;
-            s->strstart++;
-
-            if (bflush) FLUSH_BLOCK(s, Z_NO_FLUSH);
-
-        } else if (s->match_available) {
-            /* If there was no match at the previous position, output a
-             * single literal. If there was a match but the current match
-             * is longer, truncate the previous match to a single literal.
-             */
-            Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            if (ct_tally (s, 0, s->window[s->strstart-1])) {
-                FLUSH_BLOCK_ONLY(s, Z_NO_FLUSH);
-            }
-            s->strstart++;
-            s->lookahead--;
-            if (s->strm->avail_out == 0) return 1;
-        } else {
-            /* There is no previous match to compare with, wait for
-             * the next step to decide.
-             */
-            s->match_available = 1;
-            s->strstart++;
-            s->lookahead--;
-        }
-    }
-    Assert (flush != Z_NO_FLUSH, "no flush?");
-    if (s->match_available) {
-        Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        ct_tally (s, 0, s->window[s->strstart-1]);
-        s->match_available = 0;
-    }
-    FLUSH_BLOCK(s, flush);
-    return 0;
-}
-
-
-/*+++++*/
-/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/*
- *  ALGORITHM
- *
- *      The "deflation" process uses several Huffman trees. The more
- *      common source values are represented by shorter bit sequences.
- *
- *      Each code tree is stored in a compressed form which is itself
- * a Huffman encoding of the lengths of all the code strings (in
- * ascending order by source values).  The actual code strings are
- * reconstructed from the lengths in the inflate process, as described
- * in the deflate specification.
- *
- *  REFERENCES
- *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
- *
- *      Storer, James A.
- *          Data Compression:  Methods and Theory, pp. 49-50.
- *          Computer Science Press, 1988.  ISBN 0-7167-8156-5.
- *
- *      Sedgewick, R.
- *          Algorithms, p290.
- *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
- */
-
-/* From: trees.c,v 1.5 1995/05/03 17:27:12 jloup Exp */
-
-#ifdef DEBUG_ZLIB
-#  include <ctype.h>
-#endif
-
-/* ===========================================================================
- * Constants
- */
-
-#define MAX_BL_BITS 7
-/* Bit length codes must not exceed MAX_BL_BITS bits */
-
-#define END_BLOCK 256
-/* end of block literal code */
-
-#define REP_3_6      16
-/* repeat previous bit length 3-6 times (2 bits of repeat count) */
-
-#define REPZ_3_10    17
-/* repeat a zero length 3-10 times  (3 bits of repeat count) */
-
-#define REPZ_11_138  18
-/* repeat a zero length 11-138 times  (7 bits of repeat count) */
-
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
-   = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
-
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
-   = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
-
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
-   = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
-
-local uch bl_order[BL_CODES]
-   = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
-/* The lengths of the bit length codes are sent in order of decreasing
- * probability, to avoid transmitting the lengths for unused bit length codes.
- */
-
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
-/* ===========================================================================
- * Local data. These are initialized only once.
- * To do: initialize at compile time to be completely reentrant. ???
- */
-
-local ct_data static_ltree[L_CODES+2];
-/* The static literal tree. Since the bit lengths are imposed, there is no
- * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see ct_init
- * below).
- */
-
-local ct_data static_dtree[D_CODES];
-/* The static distance tree. (Actually a trivial tree since all codes use
- * 5 bits.)
- */
-
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
- * 3 .. 258, the last 256 values correspond to the top 8 bits of
- * the 15 bit distances.
- */
-
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
-/* length code for each normalized match length (0 == MIN_MATCH) */
-
-local int base_length[LENGTH_CODES];
-/* First normalized length for each code (0 = MIN_MATCH) */
-
-local int base_dist[D_CODES];
-/* First normalized distance for each code (0 = distance of 1) */
-
-struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
-    intf    *extra_bits;         /* extra bits for each code or NULL */
-    int     extra_base;          /* base index for extra_bits */
-    int     elems;               /* max number of elements in the tree */
-    int     max_length;          /* max bit length for the codes */
-};
-
-local static_tree_desc  static_l_desc =
-{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS};
-
-local static_tree_desc  static_d_desc =
-{static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
-
-local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
-
-/* ===========================================================================
- * Local (static) routines in this file.
- */
-
-local void ct_static_init OF((void));
-local void init_block     OF((deflate_state *s));
-local void pqdownheap     OF((deflate_state *s, ct_data *tree, int k));
-local void gen_bitlen     OF((deflate_state *s, tree_desc *desc));
-local void gen_codes      OF((ct_data *tree, int max_code, ushf *bl_count));
-local void build_tree     OF((deflate_state *s, tree_desc *desc));
-local void scan_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local void send_tree      OF((deflate_state *s, ct_data *tree, int max_code));
-local int  build_bl_tree  OF((deflate_state *s));
-local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
-                              int blcodes));
-local void compress_block OF((deflate_state *s, ct_data *ltree,
-                              ct_data *dtree));
-local void set_data_type  OF((deflate_state *s));
-local unsigned bi_reverse OF((unsigned value, int length));
-local void bi_windup      OF((deflate_state *s));
-local void bi_flush       OF((deflate_state *s));
-local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
-                              int header));
-
-#ifndef DEBUG_ZLIB
-#  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
-   /* Send a code of the given tree. c and tree must not have side effects */
-
-#else /* DEBUG_ZLIB */
-#  define send_code(s, c, tree) \
-     { if (verbose>1) fprintf(stderr,"\ncd %3d ",(c)); \
-       send_bits(s, tree[c].Code, tree[c].Len); }
-#endif
-
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
-/* ===========================================================================
- * Output a short LSB first on the stream.
- * IN assertion: there is enough room in pendingBuf.
- */
-#define put_short(s, w) { \
-    put_byte(s, (uch)((w) & 0xff)); \
-    put_byte(s, (uch)((ush)(w) >> 8)); \
-}
-
-/* ===========================================================================
- * Send a value on a given number of bits.
- * IN assertion: length <= 16 and value fits in length bits.
- */
-#ifdef DEBUG_ZLIB
-local void send_bits      OF((deflate_state *s, int value, int length));
-
-local void send_bits(s, value, length)
-    deflate_state *s;
-    int value;  /* value to send */
-    int length; /* number of bits */
-{
-    Tracev((stderr," l %2d v %4x ", length, value));
-    Assert(length > 0 && length <= 15, "invalid length");
-    s->bits_sent += (ulg)length;
-
-    /* If not enough room in bi_buf, use (valid) bits from bi_buf and
-     * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid))
-     * unused bits in value.
-     */
-    if (s->bi_valid > (int)Buf_size - length) {
-        s->bi_buf |= (value << s->bi_valid);
-        put_short(s, s->bi_buf);
-        s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
-        s->bi_valid += length - Buf_size;
-    } else {
-        s->bi_buf |= value << s->bi_valid;
-        s->bi_valid += length;
-    }
-}
-#else /* !DEBUG_ZLIB */
-
-#define send_bits(s, value, length) \
-{ int len = length;\
-  if (s->bi_valid > (int)Buf_size - len) {\
-    int val = value;\
-    s->bi_buf |= (val << s->bi_valid);\
-    put_short(s, s->bi_buf);\
-    s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
-    s->bi_valid += len - Buf_size;\
-  } else {\
-    s->bi_buf |= (value) << s->bi_valid;\
-    s->bi_valid += len;\
-  }\
-}
-#endif /* DEBUG_ZLIB */
-
-
-#define MAX(a,b) (a >= b ? a : b)
-/* the arguments must not have side effects */
-
-/* ===========================================================================
- * Initialize the various 'constant' tables.
- * To do: do this at compile time.
- */
-local void ct_static_init()
-{
-    int n;        /* iterates over tree elements */
-    int bits;     /* bit counter */
-    int length;   /* length value */
-    int code;     /* code value */
-    int dist;     /* distance index */
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    /* Initialize the mapping length (0..255) -> length code (0..28) */
-    length = 0;
-    for (code = 0; code < LENGTH_CODES-1; code++) {
-        base_length[code] = length;
-        for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
-        }
-    }
-    Assert (length == 256, "ct_static_init: length != 256");
-    /* Note that the length 255 (match length 258) can be represented
-     * in two different ways: code 284 + 5 bits or code 285, so we
-     * overwrite length_code[255] to use the best encoding:
-     */
-    length_code[length-1] = (uch)code;
-
-    /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
-    dist = 0;
-    for (code = 0 ; code < 16; code++) {
-        base_dist[code] = dist;
-        for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "ct_static_init: dist != 256");
-    dist >>= 7; /* from now on, all distances are divided by 128 */
-    for ( ; code < D_CODES; code++) {
-        base_dist[code] = dist << 7;
-        for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
-        }
-    }
-    Assert (dist == 256, "ct_static_init: 256+dist != 512");
-
-    /* Construct the codes of the static literal tree */
-    for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0;
-    n = 0;
-    while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++;
-    while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++;
-    while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++;
-    while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++;
-    /* Codes 286 and 287 do not exist, but we must include them in the
-     * tree construction to get a canonical Huffman tree (longest code
-     * all ones)
-     */
-    gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count);
-
-    /* The static distance tree is trivial: */
-    for (n = 0; n < D_CODES; n++) {
-        static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse(n, 5);
-    }
-}
-
-/* ===========================================================================
- * Initialize the tree data structures for a new zlib stream.
- */
-local void ct_init(s)
-    deflate_state *s;
-{
-    if (static_dtree[0].Len == 0) {
-        ct_static_init();              /* To do: at compile time */
-    }
-
-    s->compressed_len = 0L;
-
-    s->l_desc.dyn_tree = s->dyn_ltree;
-    s->l_desc.stat_desc = &static_l_desc;
-
-    s->d_desc.dyn_tree = s->dyn_dtree;
-    s->d_desc.stat_desc = &static_d_desc;
-
-    s->bl_desc.dyn_tree = s->bl_tree;
-    s->bl_desc.stat_desc = &static_bl_desc;
-
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG_ZLIB
-    s->bits_sent = 0L;
-#endif
-    s->blocks_in_packet = 0;
-
-    /* Initialize the first block of the first file: */
-    init_block(s);
-}
-
-/* ===========================================================================
- * Initialize a new block.
- */
-local void init_block(s)
-    deflate_state *s;
-{
-    int n; /* iterates over tree elements */
-
-    /* Initialize the trees. */
-    for (n = 0; n < L_CODES;  n++) s->dyn_ltree[n].Freq = 0;
-    for (n = 0; n < D_CODES;  n++) s->dyn_dtree[n].Freq = 0;
-    for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0;
-
-    s->dyn_ltree[END_BLOCK].Freq = 1;
-    s->opt_len = s->static_len = 0L;
-    s->last_lit = s->matches = 0;
-}
-
-#define SMALLEST 1
-/* Index within the heap array of least frequent node in the Huffman tree */
-
-
-/* ===========================================================================
- * Remove the smallest element from the heap and recreate the heap with
- * one less element. Updates heap and heap_len.
- */
-#define pqremove(s, tree, top) \
-{\
-    top = s->heap[SMALLEST]; \
-    s->heap[SMALLEST] = s->heap[s->heap_len--]; \
-    pqdownheap(s, tree, SMALLEST); \
-}
-
-/* ===========================================================================
- * Compares to subtrees, using the tree depth as tie breaker when
- * the subtrees have equal frequency. This minimizes the worst case length.
- */
-#define smaller(tree, n, m, depth) \
-   (tree[n].Freq < tree[m].Freq || \
-   (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m]))
-
-/* ===========================================================================
- * Restore the heap property by moving down the tree starting at node k,
- * exchanging a node with the smallest of its two sons if necessary, stopping
- * when the heap property is re-established (each father smaller than its
- * two sons).
- */
-local void pqdownheap(s, tree, k)
-    deflate_state *s;
-    ct_data *tree;  /* the tree to restore */
-    int k;               /* node to move down */
-{
-    int v = s->heap[k];
-    int j = k << 1;  /* left son of k */
-    while (j <= s->heap_len) {
-        /* Set j to the smallest of the two sons: */
-        if (j < s->heap_len &&
-            smaller(tree, s->heap[j+1], s->heap[j], s->depth)) {
-            j++;
-        }
-        /* Exit if v is smaller than both sons */
-        if (smaller(tree, v, s->heap[j], s->depth)) break;
-
-        /* Exchange v with the smallest son */
-        s->heap[k] = s->heap[j];  k = j;
-
-        /* And continue down the tree, setting j to the left son of k */
-        j <<= 1;
-    }
-    s->heap[k] = v;
-}
-
-/* ===========================================================================
- * Compute the optimal bit lengths for a tree and update the total bit length
- * for the current block.
- * IN assertion: the fields freq and dad are set, heap[heap_max] and
- *    above are the tree nodes sorted by increasing frequency.
- * OUT assertions: the field len is set to the optimal bit length, the
- *     array bl_count contains the frequencies for each bit length.
- *     The length opt_len is updated; static_len is also updated if stree is
- *     not null.
- */
-local void gen_bitlen(s, desc)
-    deflate_state *s;
-    tree_desc *desc;    /* the tree descriptor */
-{
-    ct_data *tree  = desc->dyn_tree;
-    int max_code   = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
-    intf *extra    = desc->stat_desc->extra_bits;
-    int base       = desc->stat_desc->extra_base;
-    int max_length = desc->stat_desc->max_length;
-    int h;              /* heap index */
-    int n, m;           /* iterate over the tree elements */
-    int bits;           /* bit length */
-    int xbits;          /* extra bits */
-    ush f;              /* frequency */
-    int overflow = 0;   /* number of elements with bit length too large */
-
-    for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0;
-
-    /* In a first pass, compute the optimal bit lengths (which may
-     * overflow in the case of the bit length tree).
-     */
-    tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */
-
-    for (h = s->heap_max+1; h < HEAP_SIZE; h++) {
-        n = s->heap[h];
-        bits = tree[tree[n].Dad].Len + 1;
-        if (bits > max_length) bits = max_length, overflow++;
-        tree[n].Len = (ush)bits;
-        /* We overwrite tree[n].Dad which is no longer needed */
-
-        if (n > max_code) continue; /* not a leaf node */
-
-        s->bl_count[bits]++;
-        xbits = 0;
-        if (n >= base) xbits = extra[n-base];
-        f = tree[n].Freq;
-        s->opt_len += (ulg)f * (bits + xbits);
-        if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits);
-    }
-    if (overflow == 0) return;
-
-    Trace((stderr,"\nbit length overflow\n"));
-    /* This happens for example on obj2 and pic of the Calgary corpus */
-
-    /* Find the first bit length which could increase: */
-    do {
-        bits = max_length-1;
-        while (s->bl_count[bits] == 0) bits--;
-        s->bl_count[bits]--;      /* move one leaf down the tree */
-        s->bl_count[bits+1] += 2; /* move one overflow item as its brother */
-        s->bl_count[max_length]--;
-        /* The brother of the overflow item also moves one step up,
-         * but this does not affect bl_count[max_length]
-         */
-        overflow -= 2;
-    } while (overflow > 0);
-
-    /* Now recompute all bit lengths, scanning in increasing frequency.
-     * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all
-     * lengths instead of fixing only the wrong ones. This idea is taken
-     * from 'ar' written by Haruhiko Okumura.)
-     */
-    for (bits = max_length; bits != 0; bits--) {
-        n = s->bl_count[bits];
-        while (n != 0) {
-            m = s->heap[--h];
-            if (m > max_code) continue;
-            if (tree[m].Len != (unsigned) bits) {
-                Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
-                s->opt_len += ((long)bits - (long)tree[m].Len)
-                              *(long)tree[m].Freq;
-                tree[m].Len = (ush)bits;
-            }
-            n--;
-        }
-    }
-}
-
-/* ===========================================================================
- * Generate the codes for a given tree and bit counts (which need not be
- * optimal).
- * IN assertion: the array bl_count contains the bit length statistics for
- * the given tree and the field len is set for all tree elements.
- * OUT assertion: the field code is set for all tree elements of non
- *     zero code length.
- */
-local void gen_codes (tree, max_code, bl_count)
-    ct_data *tree;             /* the tree to decorate */
-    int max_code;              /* largest code with non zero frequency */
-    ushf *bl_count;            /* number of codes at each bit length */
-{
-    ush next_code[MAX_BITS+1]; /* next code value for each bit length */
-    ush code = 0;              /* running code value */
-    int bits;                  /* bit index */
-    int n;                     /* code index */
-
-    /* The distribution counts are first used to generate the code values
-     * without bit reversal.
-     */
-    for (bits = 1; bits <= MAX_BITS; bits++) {
-        next_code[bits] = code = (code + bl_count[bits-1]) << 1;
-    }
-    /* Check that the bit counts in bl_count are consistent. The last code
-     * must be all ones.
-     */
-    Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1,
-            "inconsistent bit counts");
-    Tracev((stderr,"\ngen_codes: max_code %d ", max_code));
-
-    for (n = 0;  n <= max_code; n++) {
-        int len = tree[n].Len;
-        if (len == 0) continue;
-        /* Now reverse the bits */
-        tree[n].Code = bi_reverse(next_code[len]++, len);
-
-        Tracec(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ",
-             n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1));
-    }
-}
-
-/* ===========================================================================
- * Construct one Huffman tree and assigns the code bit strings and lengths.
- * Update the total bit length for the current block.
- * IN assertion: the field freq is set for all tree elements.
- * OUT assertions: the fields len and code are set to the optimal bit length
- *     and corresponding code. The length opt_len is updated; static_len is
- *     also updated if stree is not null. The field max_code is set.
- */
-local void build_tree(s, desc)
-    deflate_state *s;
-    tree_desc *desc; /* the tree descriptor */
-{
-    ct_data *tree   = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
-    int elems       = desc->stat_desc->elems;
-    int n, m;          /* iterate over heap elements */
-    int max_code = -1; /* largest code with non zero frequency */
-    int node;          /* new node being created */
-
-    /* Construct the initial heap, with least frequent element in
-     * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1].
-     * heap[0] is not used.
-     */
-    s->heap_len = 0, s->heap_max = HEAP_SIZE;
-
-    for (n = 0; n < elems; n++) {
-        if (tree[n].Freq != 0) {
-            s->heap[++(s->heap_len)] = max_code = n;
-            s->depth[n] = 0;
-        } else {
-            tree[n].Len = 0;
-        }
-    }
-
-    /* The pkzip format requires that at least one distance code exists,
-     * and that at least one bit should be sent even if there is only one
-     * possible code. So to avoid special checks later on we force at least
-     * two codes of non zero frequency.
-     */
-    while (s->heap_len < 2) {
-        node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0);
-        tree[node].Freq = 1;
-        s->depth[node] = 0;
-        s->opt_len--; if (stree) s->static_len -= stree[node].Len;
-        /* node is 0 or 1 so it does not have extra bits */
-    }
-    desc->max_code = max_code;
-
-    /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree,
-     * establish sub-heaps of increasing lengths:
-     */
-    for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n);
-
-    /* Construct the Huffman tree by repeatedly combining the least two
-     * frequent nodes.
-     */
-    node = elems;              /* next internal node of the tree */
-    do {
-        pqremove(s, tree, n);  /* n = node of least frequency */
-        m = s->heap[SMALLEST]; /* m = node of next least frequency */
-
-        s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */
-        s->heap[--(s->heap_max)] = m;
-
-        /* Create a new node father of n and m */
-        tree[node].Freq = tree[n].Freq + tree[m].Freq;
-        s->depth[node] = (uch) (MAX(s->depth[n], s->depth[m]) + 1);
-        tree[n].Dad = tree[m].Dad = (ush)node;
-#ifdef DUMP_BL_TREE
-        if (tree == s->bl_tree) {
-            fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)",
-                    node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq);
-        }
-#endif
-        /* and insert the new node in the heap */
-        s->heap[SMALLEST] = node++;
-        pqdownheap(s, tree, SMALLEST);
-
-    } while (s->heap_len >= 2);
-
-    s->heap[--(s->heap_max)] = s->heap[SMALLEST];
-
-    /* At this point, the fields freq and dad are set. We can now
-     * generate the bit lengths.
-     */
-    gen_bitlen(s, (tree_desc *)desc);
-
-    /* The field len is now set, we can generate the bit codes */
-    gen_codes ((ct_data *)tree, max_code, s->bl_count);
-}
-
-/* ===========================================================================
- * Scan a literal or distance tree to determine the frequencies of the codes
- * in the bit length tree.
- */
-local void scan_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree;   /* the tree to be scanned */
-    int max_code;    /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    if (nextlen == 0) max_count = 138, min_count = 3;
-    tree[max_code+1].Len = (ush)0xffff; /* guard */
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            s->bl_tree[curlen].Freq += count;
-        } else if (curlen != 0) {
-            if (curlen != prevlen) s->bl_tree[curlen].Freq++;
-            s->bl_tree[REP_3_6].Freq++;
-        } else if (count <= 10) {
-            s->bl_tree[REPZ_3_10].Freq++;
-        } else {
-            s->bl_tree[REPZ_11_138].Freq++;
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Send a literal or distance tree in compressed form, using the codes in
- * bl_tree.
- */
-local void send_tree (s, tree, max_code)
-    deflate_state *s;
-    ct_data *tree; /* the tree to be scanned */
-    int max_code;       /* and its largest code of non zero frequency */
-{
-    int n;                     /* iterates over all tree elements */
-    int prevlen = -1;          /* last emitted length */
-    int curlen;                /* length of current code */
-    int nextlen = tree[0].Len; /* length of next code */
-    int count = 0;             /* repeat count of the current code */
-    int max_count = 7;         /* max repeat count */
-    int min_count = 4;         /* min repeat count */
-
-    /* tree[max_code+1].Len = -1; */  /* guard already set */
-    if (nextlen == 0) max_count = 138, min_count = 3;
-
-    for (n = 0; n <= max_code; n++) {
-        curlen = nextlen; nextlen = tree[n+1].Len;
-        if (++count < max_count && curlen == nextlen) {
-            continue;
-        } else if (count < min_count) {
-            do { send_code(s, curlen, s->bl_tree); } while (--count != 0);
-
-        } else if (curlen != 0) {
-            if (curlen != prevlen) {
-                send_code(s, curlen, s->bl_tree); count--;
-            }
-            Assert(count >= 3 && count <= 6, " 3_6?");
-            send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2);
-
-        } else if (count <= 10) {
-            send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3);
-
-        } else {
-            send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7);
-        }
-        count = 0; prevlen = curlen;
-        if (nextlen == 0) {
-            max_count = 138, min_count = 3;
-        } else if (curlen == nextlen) {
-            max_count = 6, min_count = 3;
-        } else {
-            max_count = 7, min_count = 4;
-        }
-    }
-}
-
-/* ===========================================================================
- * Construct the Huffman tree for the bit lengths and return the index in
- * bl_order of the last bit length code to send.
- */
-local int build_bl_tree(s)
-    deflate_state *s;
-{
-    int max_blindex;  /* index of last bit length code of non zero freq */
-
-    /* Determine the bit length frequencies for literal and distance trees */
-    scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code);
-    scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code);
-
-    /* Build the bit length tree: */
-    build_tree(s, (tree_desc *)(&(s->bl_desc)));
-    /* opt_len now includes the length of the tree representations, except
-     * the lengths of the bit lengths codes and the 5+5+4 bits for the counts.
-     */
-
-    /* Determine the number of bit length codes to send. The pkzip format
-     * requires that at least 4 bit length codes be sent. (appnote.txt says
-     * 3 but the actual value used is 4.)
-     */
-    for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) {
-        if (s->bl_tree[bl_order[max_blindex]].Len != 0) break;
-    }
-    /* Update opt_len to include the bit length tree and counts */
-    s->opt_len += 3*(max_blindex+1) + 5+5+4;
-    Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld",
-            s->opt_len, s->static_len));
-
-    return max_blindex;
-}
-
-/* ===========================================================================
- * Send the header for a block using dynamic Huffman trees: the counts, the
- * lengths of the bit length codes, the literal tree and the distance tree.
- * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4.
- */
-local void send_all_trees(s, lcodes, dcodes, blcodes)
-    deflate_state *s;
-    int lcodes, dcodes, blcodes; /* number of codes for each tree */
-{
-    int rank;                    /* index in bl_order */
-
-    Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes");
-    Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES,
-            "too many codes");
-    Tracev((stderr, "\nbl counts: "));
-    send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */
-    send_bits(s, dcodes-1,   5);
-    send_bits(s, blcodes-4,  4); /* not -3 as stated in appnote.txt */
-    for (rank = 0; rank < blcodes; rank++) {
-        Tracev((stderr, "\nbl code %2d ", bl_order[rank]));
-        send_bits(s, s->bl_tree[bl_order[rank]].Len, 3);
-    }
-    Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */
-    Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent));
-
-    send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */
-    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
-}
-
-/* ===========================================================================
- * Send a stored block
- */
-local void ct_stored_block(s, buf, stored_len, eof)
-    deflate_state *s;
-    charf *buf;       /* input block */
-    ulg stored_len;   /* length of input block */
-    int eof;          /* true if this is the last block for a file */
-{
-    send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
-    s->compressed_len = (s->compressed_len + 3 + 7) & ~7L;
-    s->compressed_len += (stored_len + 4) << 3;
-
-    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-}
-
-/* Send just the `stored block' type code without any length bytes or data.
- */
-local void ct_stored_type_only(s)
-    deflate_state *s;
-{
-    send_bits(s, (STORED_BLOCK << 1), 3);
-    bi_windup(s);
-    s->compressed_len = (s->compressed_len + 3) & ~7L;
-}
-
-
-/* ===========================================================================
- * Send one empty static block to give enough lookahead for inflate.
- * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the EOB
- * code for the previous block was coded on 5 bits or less, inflate
- * may have only 5+3 bits of lookahead to decode this EOB.
- * (There are no problems if the previous block is stored or fixed.)
- */
-local void ct_align(s)
-    deflate_state *s;
-{
-    send_bits(s, STATIC_TREES<<1, 3);
-    send_code(s, END_BLOCK, static_ltree);
-    s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
-    bi_flush(s);
-    /* Of the 10 bits for the empty block, we have already sent
-     * (10 - bi_valid) bits. The lookahead for the EOB of the previous
-     * block was thus its length plus what we have just sent.
-     */
-    if (s->last_eob_len + 10 - s->bi_valid < 9) {
-        send_bits(s, STATIC_TREES<<1, 3);
-        send_code(s, END_BLOCK, static_ltree);
-        s->compressed_len += 10L;
-        bi_flush(s);
-    }
-    s->last_eob_len = 7;
-}
-
-/* ===========================================================================
- * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
- */
-local ulg ct_flush_block(s, buf, stored_len, flush)
-    deflate_state *s;
-    charf *buf;       /* input block, or NULL if too old */
-    ulg stored_len;   /* length of input block */
-    int flush;        /* Z_FINISH if this is the last block for a file */
-{
-    ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex;  /* index of last bit length code of non zero freq */
-    int eof = flush == Z_FINISH;
-
-    ++s->blocks_in_packet;
-
-    /* Check if the file is ascii or binary */
-    if (s->data_type == UNKNOWN) set_data_type(s);
-
-    /* Construct the literal and distance trees */
-    build_tree(s, (tree_desc *)(&(s->l_desc)));
-    Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len,
-            s->static_len));
-
-    build_tree(s, (tree_desc *)(&(s->d_desc)));
-    Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len,
-            s->static_len));
-    /* At this point, opt_len and static_len are the total bit lengths of
-     * the compressed block data, excluding the tree representations.
-     */
-
-    /* Build the bit length tree for the above two trees, and get the index
-     * in bl_order of the last bit length code to send.
-     */
-    max_blindex = build_bl_tree(s);
-
-    /* Determine the best encoding. Compute first the block length in bytes */
-    opt_lenb = (s->opt_len+3+7)>>3;
-    static_lenb = (s->static_len+3+7)>>3;
-
-    Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ",
-            opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len,
-            s->last_lit));
-
-    if (static_lenb <= opt_lenb) opt_lenb = static_lenb;
-
-    /* If compression failed and this is the first and last block,
-     * and if the .zip file can be seeked (to rewrite the local header),
-     * the whole file is transformed into a stored file:
-     */
-#ifdef STORED_FILE_OK
-#  ifdef FORCE_STORED_FILE
-    if (eof && compressed_len == 0L) /* force stored file */
-#  else
-    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable())
-#  endif
-    {
-        /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
-        if (buf == (charf*)0) error ("block vanished");
-
-        copy_block(buf, (unsigned)stored_len, 0); /* without header */
-        s->compressed_len = stored_len << 3;
-        s->method = STORED;
-    } else
-#endif /* STORED_FILE_OK */
-
-    /* For Z_PACKET_FLUSH, if we don't achieve the required minimum
-     * compression, and this block contains all the data since the last
-     * time we used Z_PACKET_FLUSH, then just omit this block completely
-     * from the output.
-     */
-    if (flush == Z_PACKET_FLUSH && s->blocks_in_packet == 1
-	&& opt_lenb > stored_len - s->minCompr) {
-	s->blocks_in_packet = 0;
-	/* output nothing */
-    } else
-
-#ifdef FORCE_STORED
-    if (buf != (char*)0) /* force stored block */
-#else
-    if (stored_len+4 <= opt_lenb && buf != (char*)0)
-                       /* 4: two words for the lengths */
-#endif
-    {
-        /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE.
-         * Otherwise we can't have processed more than WSIZE input bytes since
-         * the last block flush, because compression would have been
-         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
-         * transform a block into a stored block.
-         */
-        ct_stored_block(s, buf, stored_len, eof);
-    } else
-
-#ifdef FORCE_STATIC
-    if (static_lenb >= 0) /* force static trees */
-#else
-    if (static_lenb == opt_lenb)
-#endif
-    {
-        send_bits(s, (STATIC_TREES<<1)+eof, 3);
-        compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-        s->compressed_len += 3 + s->static_len;
-    } else {
-        send_bits(s, (DYN_TREES<<1)+eof, 3);
-        send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
-                       max_blindex+1);
-        compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-        s->compressed_len += 3 + s->opt_len;
-    }
-    Assert (s->compressed_len == s->bits_sent, "bad compressed size");
-    init_block(s);
-
-    if (eof) {
-        bi_windup(s);
-        s->compressed_len += 7;  /* align on byte boundary */
-    }
-    Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
-           s->compressed_len-7*eof));
-
-    return s->compressed_len >> 3;
-}
-
-/* ===========================================================================
- * Save the match info and tally the frequency counts. Return true if
- * the current block must be flushed.
- */
-local int ct_tally (s, dist, lc)
-    deflate_state *s;
-    int dist;  /* distance of matched string */
-    int lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
-{
-    s->d_buf[s->last_lit] = (ush)dist;
-    s->l_buf[s->last_lit++] = (uch)lc;
-    if (dist == 0) {
-        /* lc is the unmatched char */
-        s->dyn_ltree[lc].Freq++;
-    } else {
-        s->matches++;
-        /* Here, lc is the match length - MIN_MATCH */
-        dist--;             /* dist = match distance - 1 */
-        Assert((ush)dist < (ush)MAX_DIST(s) &&
-               (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "ct_tally: bad match");
-
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
-        s->dyn_dtree[d_code(dist)].Freq++;
-    }
-
-    /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
-        /* Compute an upper bound for the compressed length */
-        ulg out_length = (ulg)s->last_lit*8L;
-        ulg in_length = (ulg)s->strstart - s->block_start;
-        int dcode;
-        for (dcode = 0; dcode < D_CODES; dcode++) {
-            out_length += (ulg)s->dyn_dtree[dcode].Freq *
-                (5L+extra_dbits[dcode]);
-        }
-        out_length >>= 3;
-        Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ",
-               s->last_lit, in_length, out_length,
-               100L - out_length*100L/in_length));
-        if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
-    }
-    return (s->last_lit == s->lit_bufsize-1);
-    /* We avoid equality with lit_bufsize because of wraparound at 64K
-     * on 16 bit machines and because stored blocks are restricted to
-     * 64K-1 bytes.
-     */
-}
-
-/* ===========================================================================
- * Send the block data compressed using the given Huffman trees
- */
-local void compress_block(s, ltree, dtree)
-    deflate_state *s;
-    ct_data *ltree; /* literal tree */
-    ct_data *dtree; /* distance tree */
-{
-    unsigned dist;      /* distance of matched string */
-    int lc;             /* match length or unmatched char (if dist == 0) */
-    unsigned lx = 0;    /* running index in l_buf */
-    unsigned code;      /* the code to send */
-    int extra;          /* number of extra bits to send */
-
-    if (s->last_lit != 0) do {
-        dist = s->d_buf[lx];
-        lc = s->l_buf[lx++];
-        if (dist == 0) {
-            send_code(s, lc, ltree); /* send a literal byte */
-            Tracecv(isgraph(lc), (stderr," '%c' ", lc));
-        } else {
-            /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
-            send_code(s, code+LITERALS+1, ltree); /* send the length code */
-            extra = extra_lbits[code];
-            if (extra != 0) {
-                lc -= base_length[code];
-                send_bits(s, lc, extra);       /* send the extra length bits */
-            }
-            dist--; /* dist is now the match distance - 1 */
-            code = d_code(dist);
-            Assert (code < D_CODES, "bad d_code");
-
-            send_code(s, code, dtree);       /* send the distance code */
-            extra = extra_dbits[code];
-            if (extra != 0) {
-                dist -= base_dist[code];
-                send_bits(s, dist, extra);   /* send the extra distance bits */
-            }
-        } /* literal or match pair ? */
-
-        /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */
-        Assert(s->pending < s->lit_bufsize + 2*lx, "pendingBuf overflow");
-
-    } while (lx < s->last_lit);
-
-    send_code(s, END_BLOCK, ltree);
-    s->last_eob_len = ltree[END_BLOCK].Len;
-}
-
-/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
- */
-local void set_data_type(s)
-    deflate_state *s;
-{
-    int n = 0;
-    unsigned ascii_freq = 0;
-    unsigned bin_freq = 0;
-    while (n < 7)        bin_freq += s->dyn_ltree[n++].Freq;
-    while (n < 128)    ascii_freq += s->dyn_ltree[n++].Freq;
-    while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
-    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? BINARY : ASCII);
-}
-
-/* ===========================================================================
- * Reverse the first len bits of a code, using straightforward code (a faster
- * method would use a table)
- * IN assertion: 1 <= len <= 15
- */
-local unsigned bi_reverse(code, len)
-    unsigned code; /* the value to invert */
-    int len;       /* its bit length */
-{
-    register unsigned res = 0;
-    do {
-        res |= code & 1;
-        code >>= 1, res <<= 1;
-    } while (--len > 0);
-    return res >> 1;
-}
-
-/* ===========================================================================
- * Flush the bit buffer, keeping at most 7 bits in it.
- */
-local void bi_flush(s)
-    deflate_state *s;
-{
-    if (s->bi_valid == 16) {
-        put_short(s, s->bi_buf);
-        s->bi_buf = 0;
-        s->bi_valid = 0;
-    } else if (s->bi_valid >= 8) {
-        put_byte(s, (Byte)s->bi_buf);
-        s->bi_buf >>= 8;
-        s->bi_valid -= 8;
-    }
-}
-
-/* ===========================================================================
- * Flush the bit buffer and align the output on a byte boundary
- */
-local void bi_windup(s)
-    deflate_state *s;
-{
-    if (s->bi_valid > 8) {
-        put_short(s, s->bi_buf);
-    } else if (s->bi_valid > 0) {
-        put_byte(s, (Byte)s->bi_buf);
-    }
-    s->bi_buf = 0;
-    s->bi_valid = 0;
-#ifdef DEBUG_ZLIB
-    s->bits_sent = (s->bits_sent+7) & ~7;
-#endif
-}
-
-/* ===========================================================================
- * Copy a stored block, storing first the length and its
- * one's complement if requested.
- */
-local void copy_block(s, buf, len, header)
-    deflate_state *s;
-    charf    *buf;    /* the input data */
-    unsigned len;     /* its length */
-    int      header;  /* true if block header must be written */
-{
-    bi_windup(s);        /* align on byte boundary */
-    s->last_eob_len = 8; /* enough lookahead for inflate */
-
-    if (header) {
-        put_short(s, (ush)len);   
-        put_short(s, (ush)~len);
-#ifdef DEBUG_ZLIB
-        s->bits_sent += 2*16;
-#endif
-    }
-#ifdef DEBUG_ZLIB
-    s->bits_sent += (ulg)len<<3;
-#endif
-    while (len--) {
-        put_byte(s, *buf++);
-    }
-}
-
-
-/*+++++*/
-/* infblock.h -- header to use infblock.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_blocks_state;
-typedef struct inflate_blocks_state FAR inflate_blocks_statef;
-
-local inflate_blocks_statef * inflate_blocks_new OF((
-    z_stream *z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
-
-local int inflate_blocks OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));                      /* initial return code */
-
-local void inflate_blocks_reset OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
-
-local int inflate_blocks_free OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
-
-local int inflate_addhistory OF((
-    inflate_blocks_statef *,
-    z_stream *));
-
-local int inflate_packet_flush OF((
-    inflate_blocks_statef *));
-
-/*+++++*/
-/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* Huffman code lookup table entry--this entry is four bytes for machines
-   that have 16-bit pointers (e.g. PC's in the small or medium model). */
-
-typedef struct inflate_huft_s FAR inflate_huft;
-
-struct inflate_huft_s {
-  union {
-    struct {
-      Byte Exop;        /* number of extra bits or operation */
-      Byte Bits;        /* number of bits in this code or subcode */
-    } what;
-    uInt Nalloc;	/* number of these allocated here */
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
-  union {
-    uInt Base;          /* literal, length base, or distance base */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
-};
-
-#ifdef DEBUG_ZLIB
-  local uInt inflate_hufts;
-#endif
-
-local int inflate_trees_bits OF((
-    uIntf *,                    /* 19 code lengths */
-    uIntf *,                    /* bits tree desired/actual depth */
-    inflate_huft * FAR *,       /* bits tree result */
-    z_stream *));               /* for zalloc, zfree functions */
-
-local int inflate_trees_dynamic OF((
-    uInt,                       /* number of literal/length codes */
-    uInt,                       /* number of distance codes */
-    uIntf *,                    /* that many (total) code lengths */
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *,       /* distance tree result */
-    z_stream *));               /* for zalloc, zfree functions */
-
-local int inflate_trees_fixed OF((
-    uIntf *,                    /* literal desired/actual bit depth */
-    uIntf *,                    /* distance desired/actual bit depth */
-    inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
-
-local int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_stream *));               /* for zfree function */
-
-
-/*+++++*/
-/* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-struct inflate_codes_state;
-typedef struct inflate_codes_state FAR inflate_codes_statef;
-
-local inflate_codes_statef *inflate_codes_new OF((
-    uInt, uInt,
-    inflate_huft *, inflate_huft *,
-    z_stream *));
-
-local int inflate_codes OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));
-
-local void inflate_codes_free OF((
-    inflate_codes_statef *,
-    z_stream *));
-
-
-/*+++++*/
-/* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* inflate private state */
-struct internal_state {
-
-  /* mode */
-  enum {
-      METHOD,   /* waiting for method byte */
-      FLAG,     /* waiting for flag byte */
-      BLOCKS,   /* decompressing blocks */
-      CHECK4,   /* four check bytes to go */
-      CHECK3,   /* three check bytes to go */
-      CHECK2,   /* two check bytes to go */
-      CHECK1,   /* one check byte to go */
-      DONE,     /* finished check, done */
-      BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
-
-  /* mode dependent information */
-  union {
-    uInt method;        /* if FLAGS, method byte */
-    struct {
-      uLong was;                /* computed check value */
-      uLong need;               /* stream check value */
-    } check;            /* if CHECK, check values to compare */
-    uInt marker;        /* if BAD, inflateSync's marker bytes count */
-  } sub;        /* submode */
-
-  /* mode independent information */
-  int  nowrap;          /* flag for no wrapper */
-  uInt wbits;           /* log2(window size)  (8..15, defaults to 15) */
-  inflate_blocks_statef 
-    *blocks;            /* current inflate_blocks state */
-
-};
-
-
-int inflateReset(z)
-z_stream *z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
-  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
-  Trace((stderr, "inflate: reset\n"));
-  return Z_OK;
-}
-
-
-int inflateEnd(z)
-z_stream *z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
-  ZFREE(z, z->state, sizeof(struct internal_state));
-  z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
-  return Z_OK;
-}
-
-
-int inflateInit2(z, w)
-z_stream *z;
-int w;
-{
-  /* initialize state */
-  if (z == Z_NULL)
-    return Z_STREAM_ERROR;
-/*  if (z->zalloc == Z_NULL) z->zalloc = zcalloc; */
-/*  if (z->zfree == Z_NULL) z->zfree = zcfree; */
-  if ((z->state = (struct internal_state FAR *)
-       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
-    return Z_MEM_ERROR;
-  z->state->blocks = Z_NULL;
-
-  /* handle undocumented nowrap option (no zlib header or check) */
-  z->state->nowrap = 0;
-  if (w < 0)
-  {
-    w = - w;
-    z->state->nowrap = 1;
-  }
-
-  /* set window size */
-  if (w < 8 || w > 15)
-  {
-    inflateEnd(z);
-    return Z_STREAM_ERROR;
-  }
-  z->state->wbits = (uInt)w;
-
-  /* create inflate_blocks state */
-  if ((z->state->blocks =
-       inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
-      == Z_NULL)
-  {
-    inflateEnd(z);
-    return Z_MEM_ERROR;
-  }
-  Trace((stderr, "inflate: allocated\n"));
-
-  /* reset state */
-  inflateReset(z);
-  return Z_OK;
-}
-
-
-int inflateInit(z)
-z_stream *z;
-{
-  return inflateInit2(z, DEF_WBITS);
-}
-
-
-#define NEEDBYTE {if(z->avail_in==0)goto empty;r=Z_OK;}
-#define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
-
-int inflate(z, f)
-z_stream *z;
-int f;
-{
-  int r;
-  uInt b;
-
-  if (z == Z_NULL || z->next_in == Z_NULL)
-    return Z_STREAM_ERROR;
-  r = Z_BUF_ERROR;
-  while (1) switch (z->state->mode)
-  {
-    case METHOD:
-      NEEDBYTE
-      if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
-      {
-        z->state->mode = BAD;
-        z->msg = "unknown compression method";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid window size";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      z->state->mode = FLAG;
-    case FLAG:
-      NEEDBYTE
-      if ((b = NEXTBYTE) & 0x20)
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid reserved bit";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      if (((z->state->sub.method << 8) + b) % 31)
-      {
-        z->state->mode = BAD;
-        z->msg = "incorrect header check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib header ok\n"));
-      z->state->mode = BLOCKS;
-    case BLOCKS:
-      r = inflate_blocks(z->state->blocks, z, r);
-      if (f == Z_PACKET_FLUSH && z->avail_in == 0 && z->avail_out != 0)
-	  r = inflate_packet_flush(z->state->blocks);
-      if (r == Z_DATA_ERROR)
-      {
-        z->state->mode = BAD;
-        z->state->sub.marker = 0;       /* can try inflateSync */
-        break;
-      }
-      if (r != Z_STREAM_END)
-        return r;
-      r = Z_OK;
-      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
-      if (z->state->nowrap)
-      {
-        z->state->mode = DONE;
-        break;
-      }
-      z->state->mode = CHECK4;
-    case CHECK4:
-      NEEDBYTE
-      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
-      z->state->mode = CHECK3;
-    case CHECK3:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
-      z->state->mode = CHECK2;
-    case CHECK2:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
-      z->state->mode = CHECK1;
-    case CHECK1:
-      NEEDBYTE
-      z->state->sub.check.need += (uLong)NEXTBYTE;
-
-      if (z->state->sub.check.was != z->state->sub.check.need)
-      {
-        z->state->mode = BAD;
-        z->msg = "incorrect data check";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
-      Trace((stderr, "inflate: zlib check ok\n"));
-      z->state->mode = DONE;
-    case DONE:
-      return Z_STREAM_END;
-    case BAD:
-      return Z_DATA_ERROR;
-    default:
-      return Z_STREAM_ERROR;
-  }
-
- empty:
-  if (f != Z_PACKET_FLUSH)
-    return r;
-  z->state->mode = BAD;
-  z->state->sub.marker = 0;       /* can try inflateSync */
-  return Z_DATA_ERROR;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-
-int inflateIncomp(z)
-z_stream *z;
-{
-    if (z->state->mode != BLOCKS)
-	return Z_DATA_ERROR;
-    return inflate_addhistory(z->state->blocks, z);
-}
-
-
-int inflateSync(z)
-z_stream *z;
-{
-  uInt n;       /* number of bytes to look at */
-  Bytef *p;     /* pointer to bytes */
-  uInt m;       /* number of marker bytes found in a row */
-  uLong r, w;   /* temporaries to save total_in and total_out */
-
-  /* set up */
-  if (z == Z_NULL || z->state == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->mode != BAD)
-  {
-    z->state->mode = BAD;
-    z->state->sub.marker = 0;
-  }
-  if ((n = z->avail_in) == 0)
-    return Z_BUF_ERROR;
-  p = z->next_in;
-  m = z->state->sub.marker;
-
-  /* search */
-  while (n && m < 4)
-  {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
-      m++;
-    else if (*p)
-      m = 0;
-    else
-      m = 4 - m;
-    p++, n--;
-  }
-
-  /* restore */
-  z->total_in += p - z->next_in;
-  z->next_in = p;
-  z->avail_in = n;
-  z->state->sub.marker = m;
-
-  /* return no joy or set up to restart on a new block */
-  if (m != 4)
-    return Z_DATA_ERROR;
-  r = z->total_in;  w = z->total_out;
-  inflateReset(z);
-  z->total_in = r;  z->total_out = w;
-  z->state->mode = BLOCKS;
-  return Z_OK;
-}
-
-#undef NEEDBYTE
-#undef NEXTBYTE
-
-/*+++++*/
-/* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* inflate blocks semi-private state */
-struct inflate_blocks_state {
-
-  /* mode */
-  enum {
-      TYPE,     /* get type bits (3, including end bit) */
-      LENS,     /* get lengths for stored */
-      STORED,   /* processing stored block */
-      TABLE,    /* get table lengths */
-      BTREE,    /* get bit lengths tree for a dynamic block */
-      DTREE,    /* get length, distance trees for a dynamic block */
-      CODES,    /* processing fixed or dynamic block */
-      DRY,      /* output remaining window bytes */
-      DONEB,     /* finished last block, done */
-      BADB}      /* got a data error--stuck here */
-    mode;               /* current inflate_block mode */
-
-  /* mode dependent information */
-  union {
-    uInt left;          /* if STORED, bytes left to copy */
-    struct {
-      uInt table;               /* table lengths (14 bits) */
-      uInt index;               /* index into blens (or border) */
-      uIntf *blens;             /* bit lengths of codes */
-      uInt bb;                  /* bit length tree depth */
-      inflate_huft *tb;         /* bit length decoding tree */
-      int nblens;		/* # elements allocated at blens */
-    } trees;            /* if DTREE, decoding info for trees */
-    struct {
-      inflate_huft *tl, *td;    /* trees to free */
-      inflate_codes_statef 
-         *codes;
-    } decode;           /* if CODES, current state */
-  } sub;                /* submode */
-  uInt last;            /* true if this block is the last block */
-
-  /* mode independent information */
-  uInt bitk;            /* bits in bit buffer */
-  uLong bitb;           /* bit buffer */
-  Bytef *window;        /* sliding window */
-  Bytef *end;           /* one byte after sliding window */
-  Bytef *read;          /* window read pointer */
-  Bytef *write;         /* window write pointer */
-  check_func checkfn;   /* check function */
-  uLong check;          /* check on output */
-
-};
-
-
-/* defines for inflate input/output */
-/*   update pointers and return */
-#define UPDBITS {s->bitb=b;s->bitk=k;}
-#define UPDIN {z->avail_in=n;z->total_in+=p-z->next_in;z->next_in=p;}
-#define UPDOUT {s->write=q;}
-#define UPDATE {UPDBITS UPDIN UPDOUT}
-#define LEAVE {UPDATE return inflate_flush(s,z,r);}
-/*   get bytes and bits */
-#define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
-#define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
-#define NEXTBYTE (n--,*p++)
-#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define DUMPBITS(j) {b>>=(j);k-=(j);}
-/*   output bytes */
-#define WAVAIL (q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
-#define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
-#define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
-#define OUTBYTE(a) {*q++=(Byte)(a);m--;}
-/*   load local pointers */
-#define LOAD {LOADIN LOADOUT}
-
-/* And'ing with mask[n] masks the lower n bits */
-local uInt inflate_mask[] = {
-    0x0000,
-    0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
-    0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
-};
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush OF((
-    inflate_blocks_statef *,
-    z_stream *,
-    int));
-
-/*+++++*/
-/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-local int inflate_fast OF((
-    uInt,
-    uInt,
-    inflate_huft *,
-    inflate_huft *,
-    inflate_blocks_statef *,
-    z_stream *));
-
-
-/*+++++*/
-/* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
-        16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
-
-/*
-   Notes beyond the 1.93a appnote.txt:
-
-   1. Distance pointers never point before the beginning of the output
-      stream.
-   2. Distance pointers can point back across blocks, up to 32k away.
-   3. There is an implied maximum of 7 bits for the bit length table and
-      15 bits for the actual data.
-   4. If only one code exists, then it is encoded using one bit.  (Zero
-      would be more efficient, but perhaps a little confusing.)  If two
-      codes exist, they are coded using one bit each (0 and 1).
-   5. There is no way of sending zero distance codes--a dummy must be
-      sent if there are none.  (History: a pre 2.0 version of PKZIP would
-      store blocks with no distance codes, but this was discovered to be
-      too harsh a criterion.)  Valid only for 1.93a.  2.04c does allow
-      zero distance codes, which is sent as one code of zero bits in
-      length.
-   6. There are up to 286 literal/length codes.  Code 256 represents the
-      end-of-block.  Note however that the static length tree defines
-      288 codes just to fill out the Huffman codes.  Codes 286 and 287
-      cannot be used though, since there is no length base or extra bits
-      defined for them.  Similarily, there are up to 30 distance codes.
-      However, static trees define 32 codes (all 5 bits) to fill out the
-      Huffman codes, but the last two had better not show up in the data.
-   7. Unzip can check dynamic Huffman blocks for complete code sets.
-      The exception is that a single code would not be complete (see #4).
-   8. The five bits following the block type is really the number of
-      literal codes sent minus 257.
-   9. Length codes 8,16,16 are interpreted as 13 length codes of 8 bits
-      (1+6+6).  Therefore, to output three times the length, you output
-      three codes (1+1+1), whereas to output four times the same length,
-      you only need two codes (1+3).  Hmm.
-  10. In the tree reconstruction algorithm, Code = Code + Increment
-      only if BitLength(i) is not zero.  (Pretty obvious.)
-  11. Correction: 4 Bits: # of Bit Length codes - 4     (4 - 19)
-  12. Note: length code 284 can represent 227-258, but length code 285
-      really is 258.  The last length deserves its own, short code
-      since it gets used a lot in very redundant files.  The length
-      258 is special since 258 - 3 (the min match length) is 255.
-  13. The literal/length and distance code bit lengths are read as a
-      single stream of lengths.  It is possible (and advantageous) for
-      a repeat code (16, 17, or 18) to go across the boundary between
-      the two sets of lengths.
- */
-
-
-local void inflate_blocks_reset(s, z, c)
-inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
-{
-  if (s->checkfn != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
-  if (s->mode == CODES)
-  {
-    inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->bitb = 0;
-  s->read = s->write = s->window;
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(0L, Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
-}
-
-
-local inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_stream *z;
-check_func c;
-uInt w;
-{
-  inflate_blocks_statef *s;
-
-  if ((s = (inflate_blocks_statef *)ZALLOC
-       (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
-    return s;
-  if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
-  {
-    ZFREE(z, s, sizeof(struct inflate_blocks_state));
-    return Z_NULL;
-  }
-  s->end = s->window + w;
-  s->checkfn = c;
-  s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
-  return s;
-}
-
-
-local int inflate_blocks(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
-  uInt t;               /* temporary storage */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input based on current state */
-  while (1) switch (s->mode)
-  {
-    case TYPE:
-      NEEDBITS(3)
-      t = (uInt)b & 7;
-      s->last = t & 1;
-      switch (t >> 1)
-      {
-        case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          t = k & 7;                    /* go to byte boundary */
-          DUMPBITS(t)
-          s->mode = LENS;               /* get length of stored block */
-          break;
-        case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
-                 s->last ? " (last)" : ""));
-          {
-            uInt bl, bd;
-            inflate_huft *tl, *td;
-
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
-            s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
-            if (s->sub.decode.codes == Z_NULL)
-            {
-              r = Z_MEM_ERROR;
-              LEAVE
-            }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
-          }
-          DUMPBITS(3)
-          s->mode = CODES;
-          break;
-        case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
-                 s->last ? " (last)" : ""));
-          DUMPBITS(3)
-          s->mode = TABLE;
-          break;
-        case 3:                         /* illegal */
-          DUMPBITS(3)
-          s->mode = BADB;
-          z->msg = "invalid block type";
-          r = Z_DATA_ERROR;
-          LEAVE
-      }
-      break;
-    case LENS:
-      NEEDBITS(32)
-      if (((~b) >> 16) != (b & 0xffff))
-      {
-        s->mode = BADB;
-        z->msg = "invalid stored block lengths";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-      s->sub.left = (uInt)b & 0xffff;
-      b = k = 0;                      /* dump bits */
-      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : TYPE;
-      break;
-    case STORED:
-      if (n == 0)
-        LEAVE
-      NEEDOUT
-      t = s->sub.left;
-      if (t > n) t = n;
-      if (t > m) t = m;
-      zmemcpy(q, p, t);
-      p += t;  n -= t;
-      q += t;  m -= t;
-      if ((s->sub.left -= t) != 0)
-        break;
-      Tracev((stderr, "inflate:       stored end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      s->mode = s->last ? DRY : TYPE;
-      break;
-    case TABLE:
-      NEEDBITS(14)
-      s->sub.trees.table = t = (uInt)b & 0x3fff;
-#ifndef PKZIP_BUG_WORKAROUND
-      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
-      {
-        s->mode = BADB;
-        z->msg = "too many length or distance symbols";
-        r = Z_DATA_ERROR;
-        LEAVE
-      }
-#endif
-      t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
-      if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
-      {
-        r = Z_MEM_ERROR;
-        LEAVE
-      }
-      s->sub.trees.nblens = t;
-      DUMPBITS(14)
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       table sizes ok\n"));
-      s->mode = BTREE;
-    case BTREE:
-      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
-      {
-        NEEDBITS(3)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = (uInt)b & 7;
-        DUMPBITS(3)
-      }
-      while (s->sub.trees.index < 19)
-        s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
-      s->sub.trees.bb = 7;
-      t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
-      if (t != Z_OK)
-      {
-        r = t;
-        if (r == Z_DATA_ERROR)
-          s->mode = BADB;
-        LEAVE
-      }
-      s->sub.trees.index = 0;
-      Tracev((stderr, "inflate:       bits tree ok\n"));
-      s->mode = DTREE;
-    case DTREE:
-      while (t = s->sub.trees.table,
-             s->sub.trees.index < 258 + (t & 0x1f) + ((t >> 5) & 0x1f))
-      {
-        inflate_huft *h;
-        uInt i, j, c;
-
-        t = s->sub.trees.bb;
-        NEEDBITS(t)
-        h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
-        c = h->more.Base;
-        if (c < 16)
-        {
-          DUMPBITS(t)
-          s->sub.trees.blens[s->sub.trees.index++] = c;
-        }
-        else /* c == 16..18 */
-        {
-          i = c == 18 ? 7 : c - 14;
-          j = c == 18 ? 11 : 3;
-          NEEDBITS(t + i)
-          DUMPBITS(t)
-          j += (uInt)b & inflate_mask[i];
-          DUMPBITS(i)
-          i = s->sub.trees.index;
-          t = s->sub.trees.table;
-          if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
-              (c == 16 && i < 1))
-          {
-            s->mode = BADB;
-            z->msg = "invalid bit length repeat";
-            r = Z_DATA_ERROR;
-            LEAVE
-          }
-          c = c == 16 ? s->sub.trees.blens[i - 1] : 0;
-          do {
-            s->sub.trees.blens[i++] = c;
-          } while (--j);
-          s->sub.trees.index = i;
-        }
-      }
-      inflate_trees_free(s->sub.trees.tb, z);
-      s->sub.trees.tb = Z_NULL;
-      {
-        uInt bl, bd;
-        inflate_huft *tl, *td;
-        inflate_codes_statef *c;
-
-        bl = 9;         /* must be <= 9 for lookahead assumptions */
-        bd = 6;         /* must be <= 9 for lookahead assumptions */
-        t = s->sub.trees.table;
-        t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
-        if (t != Z_OK)
-        {
-          if (t == (uInt)Z_DATA_ERROR)
-            s->mode = BADB;
-          r = t;
-          LEAVE
-        }
-        Tracev((stderr, "inflate:       trees ok\n"));
-        if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
-        {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
-          r = Z_MEM_ERROR;
-          LEAVE
-        }
-        ZFREE(z, s->sub.trees.blens, s->sub.trees.nblens * sizeof(uInt));
-        s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
-      }
-      s->mode = CODES;
-    case CODES:
-      UPDATE
-      if ((r = inflate_codes(s, z, r)) != Z_STREAM_END)
-        return inflate_flush(s, z, r);
-      r = Z_OK;
-      inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
-      LOAD
-      Tracev((stderr, "inflate:       codes end, %lu total out\n",
-              z->total_out + (q >= s->read ? q - s->read :
-              (s->end - s->read) + (q - s->window))));
-      if (!s->last)
-      {
-        s->mode = TYPE;
-        break;
-      }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
-      s->mode = DRY;
-    case DRY:
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      s->mode = DONEB;
-    case DONEB:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADB:
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-local int inflate_blocks_free(s, z, c)
-inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
-{
-  inflate_blocks_reset(s, z, c);
-  ZFREE(z, s->window, s->end - s->window);
-  ZFREE(z, s, sizeof(struct inflate_blocks_state));
-  Trace((stderr, "inflate:   blocks freed\n"));
-  return Z_OK;
-}
-
-/*
- * This subroutine adds the data at next_in/avail_in to the output history
- * without performing any output.  The output buffer must be "caught up";
- * i.e. no pending output (hence s->read equals s->write), and the state must
- * be BLOCKS (i.e. we should be willing to see the start of a series of
- * BLOCKS).  On exit, the output will also be caught up, and the checksum
- * will have been updated if need be.
- */
-local int inflate_addhistory(s, z)
-inflate_blocks_statef *s;
-z_stream *z;
-{
-    uLong b;              /* bit buffer */  /* NOT USED HERE */
-    uInt k;               /* bits in bit buffer */ /* NOT USED HERE */
-    uInt t;               /* temporary storage */
-    Bytef *p;             /* input data pointer */
-    uInt n;               /* bytes available there */
-    Bytef *q;             /* output window write pointer */
-    uInt m;               /* bytes to end of window or read pointer */
-
-    if (s->read != s->write)
-	return Z_STREAM_ERROR;
-    if (s->mode != TYPE)
-	return Z_DATA_ERROR;
-
-    /* we're ready to rock */
-    LOAD
-    /* while there is input ready, copy to output buffer, moving
-     * pointers as needed.
-     */
-    while (n) {
-	t = n;  /* how many to do */
-	/* is there room until end of buffer? */
-	if (t > m) t = m;
-	/* update check information */
-	if (s->checkfn != Z_NULL)
-	    s->check = (*s->checkfn)(s->check, q, t);
-	zmemcpy(q, p, t);
-	q += t;
-	p += t;
-	n -= t;
-	z->total_out += t;
-	s->read = q;    /* drag read pointer forward */
-/*      WRAP  */ 	/* expand WRAP macro by hand to handle s->read */
-	if (q == s->end) {
-	    s->read = q = s->window;
-	    m = WAVAIL;
-	}
-    }
-    UPDATE
-    return Z_OK;
-}
-
-
-/*
- * At the end of a Deflate-compressed PPP packet, we expect to have seen
- * a `stored' block type value but not the (zero) length bytes.
- */
-local int inflate_packet_flush(s)
-    inflate_blocks_statef *s;
-{
-    if (s->mode != LENS)
-	return Z_DATA_ERROR;
-    s->mode = TYPE;
-    return Z_OK;
-}
-
-
-/*+++++*/
-/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-
-local int huft_build OF((
-    uIntf *,            /* code lengths in bits */
-    uInt,               /* number of codes */
-    uInt,               /* number of "simple" codes */
-    uIntf *,            /* list of base values for non-simple codes */
-    uIntf *,            /* list of extra bits for non-simple codes */
-    inflate_huft * FAR*,/* result: starting table */
-    uIntf *,            /* maximum lookup bits (returns actual) */
-    z_stream *));       /* for zalloc function */
-
-local voidpf falloc OF((
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
-
-local void ffree OF((
-    voidpf q,           /* opaque pointer (not used) */
-    voidpf p,           /* what to free (not used) */
-    uInt n));		/* number of bytes (not used) */
-
-/* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
-        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
-        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* actually lengths - 2; also see note #13 above about 258 */
-local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
-local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
-        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
-        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
-        8193, 12289, 16385, 24577};
-local uInt cpdext[] = { /* Extra bits for distance codes */
-        0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
-        7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
-        12, 12, 13, 13};
-
-/*
-   Huffman code decoding is performed using a multi-level table lookup.
-   The fastest way to decode is to simply build a lookup table whose
-   size is determined by the longest code.  However, the time it takes
-   to build this table can also be a factor if the data being decoded
-   is not very long.  The most common codes are necessarily the
-   shortest codes, so those codes dominate the decoding time, and hence
-   the speed.  The idea is you can have a shorter table that decodes the
-   shorter, more probable codes, and then point to subsidiary tables for
-   the longer codes.  The time it costs to decode the longer codes is
-   then traded against the time it takes to make longer tables.
-
-   This results of this trade are in the variables lbits and dbits
-   below.  lbits is the number of bits the first level table for literal/
-   length codes can decode in one step, and dbits is the same thing for
-   the distance codes.  Subsequent tables are also less than or equal to
-   those sizes.  These values may be adjusted either when all of the
-   codes are shorter than that, in which case the longest code length in
-   bits is used, or when the shortest code is *longer* than the requested
-   table size, in which case the length of the shortest code in bits is
-   used.
-
-   There are two different values for the two tables, since they code a
-   different number of possibilities each.  The literal/length table
-   codes 286 possible values, or in a flat code, a little over eight
-   bits.  The distance table codes 30 possible values, or a little less
-   than five bits, flat.  The optimum values for speed end up being
-   about one bit more than those, so lbits is 8+1 and dbits is 5+1.
-   The optimum values may differ though from machine to machine, and
-   possibly even between compilers.  Your mileage may vary.
- */
-
-
-/* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
-#define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
-
-#ifdef DEBUG_ZLIB
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
-uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= N_MAX) */
-uInt s;                 /* number of simple-valued codes (0..s-1) */
-uIntf *d;               /* list of base values for non-simple codes */
-uIntf *e;               /* list of extra bits for non-simple codes */  
-inflate_huft * FAR *t;  /* result: starting table */
-uIntf *m;               /* maximum lookup bits, returns actual */
-z_stream *zs;           /* for zalloc function */
-/* Given a list of code lengths and a maximum table size, make a set of
-   tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
-   if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
-   over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
-{
-
-  uInt a;                       /* counter for codes of length k */
-  uInt c[BMAX+1];               /* bit length count table */
-  uInt f;                       /* i repeats in table every f entries */
-  int g;                        /* maximum code length */
-  int h;                        /* table level */
-  register uInt i;              /* counter, current code */
-  register uInt j;              /* counter */
-  register int k;               /* number of bits in current code */
-  int l;                        /* bits per table (returned in m) */
-  register uIntf *p;            /* pointer into c[], b[], or v[] */
-  inflate_huft *q;              /* points to current table */
-  struct inflate_huft_s r;      /* table entry for structure assignment */
-  inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
-  register int w;               /* bits before this table == (l * h) */
-  uInt x[BMAX+1];               /* bit offsets, then code stack */
-  uIntf *xp;                    /* pointer into x */
-  int y;                        /* number of dummy codes added */
-  uInt z;                       /* number of entries in current table */
-
-
-  /* Generate counts for each bit length */
-  p = c;
-#define C0 *p++ = 0;
-#define C2 C0 C0 C0 C0
-#define C4 C2 C2 C2 C2
-  C4                            /* clear c[]--assume BMAX+1 is 16 */
-  p = b;  i = n;
-  do {
-    c[*p++]++;                  /* assume all entries <= BMAX */
-  } while (--i);
-  if (c[0] == n)                /* null input--all zero length codes */
-  {
-    *t = (inflate_huft *)Z_NULL;
-    *m = 0;
-    return Z_OK;
-  }
-
-
-  /* Find minimum and maximum length, bound *m by those */
-  l = *m;
-  for (j = 1; j <= BMAX; j++)
-    if (c[j])
-      break;
-  k = j;                        /* minimum code length */
-  if ((uInt)l < j)
-    l = j;
-  for (i = BMAX; i; i--)
-    if (c[i])
-      break;
-  g = i;                        /* maximum code length */
-  if ((uInt)l > i)
-    l = i;
-  *m = l;
-
-
-  /* Adjust last length count to fill out codes, if needed */
-  for (y = 1 << j; j < i; j++, y <<= 1)
-    if ((y -= c[j]) < 0)
-      return Z_DATA_ERROR;
-  if ((y -= c[i]) < 0)
-    return Z_DATA_ERROR;
-  c[i] += y;
-
-
-  /* Generate starting offsets into the value table for each length */
-  x[1] = j = 0;
-  p = c + 1;  xp = x + 2;
-  while (--i) {                 /* note that i == g from above */
-    *xp++ = (j += *p++);
-  }
-
-
-  /* Make a table of values in order of bit lengths */
-  p = b;  i = 0;
-  do {
-    if ((j = *p++) != 0)
-      v[x[j]++] = i;
-  } while (++i < n);
-
-
-  /* Generate the Huffman codes and for each, make the table entries */
-  x[0] = i = 0;                 /* first Huffman code is zero */
-  p = v;                        /* grab values in bit order */
-  h = -1;                       /* no tables yet--level -1 */
-  w = -l;                       /* bits decoded == (l * h) */
-  u[0] = (inflate_huft *)Z_NULL;        /* just to keep compilers happy */
-  q = (inflate_huft *)Z_NULL;   /* ditto */
-  z = 0;                        /* ditto */
-
-  /* go through the bit lengths (k already is bits in shortest code) */
-  for (; k <= g; k++)
-  {
-    a = c[k];
-    while (a--)
-    {
-      /* here i is the Huffman code of length k bits for value *p */
-      /* make tables up to required level */
-      while (k > w + l)
-      {
-        h++;
-        w += l;                 /* previous table always l bits */
-
-        /* compute minimum size table less than or equal to l bits */
-        z = (z = g - w) > (uInt)l ? l : z;      /* table size upper limit */
-        if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
-        {                       /* too few codes for k-w bit table */
-          f -= a + 1;           /* deduct codes from patterns left */
-          xp = c + k;
-          if (j < z)
-            while (++j < z)     /* try smaller tables up to z bits */
-            {
-              if ((f <<= 1) <= *++xp)
-                break;          /* enough codes to use up j bits */
-              f -= *xp;         /* else deduct codes from patterns */
-            }
-        }
-        z = 1 << j;             /* table entries for j-bit table */
-
-        /* allocate and link in new table */
-        if ((q = (inflate_huft *)ZALLOC
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
-          return Z_MEM_ERROR;   /* not enough memory */
-        }
-	q->word.Nalloc = z + 1;
-#ifdef DEBUG_ZLIB
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
-
-        /* connect to last table, if there is one */
-        if (h)
-        {
-          x[h] = i;             /* save pattern for backing up */
-          r.bits = (Byte)l;     /* bits to dump before this table */
-          r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
-          u[h-1][j] = r;        /* connect to last table */
-        }
-      }
-
-      /* set up table entry in r */
-      r.bits = (Byte)(k - w);
-      if (p >= v + n)
-        r.exop = 128 + 64;      /* out of values--invalid code */
-      else if (*p < s)
-      {
-        r.exop = (Byte)(*p < 256 ? 0 : 32 + 64);     /* 256 is end-of-block */
-        r.base = *p++;          /* simple code is just the value */
-      }
-      else
-      {
-        r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
-        r.base = d[*p++ - s];
-      }
-
-      /* fill code-like entries with r */
-      f = 1 << (k - w);
-      for (j = i >> w; j < z; j += f)
-        q[j] = r;
-
-      /* backwards increment the k-bit code i */
-      for (j = 1 << (k - 1); i & j; j >>= 1)
-        i ^= j;
-      i ^= j;
-
-      /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
-      {
-        h--;                    /* don't need to update q */
-        w -= l;
-      }
-    }
-  }
-
-
-  /* Return Z_BUF_ERROR if we were given an incomplete table */
-  return y != 0 && g != 1 ? Z_BUF_ERROR : Z_OK;
-}
-
-
-local int inflate_trees_bits(c, bb, tb, z)
-uIntf *c;               /* 19 code lengths */
-uIntf *bb;              /* bits tree desired/actual depth */
-inflate_huft * FAR *tb; /* bits tree result */
-z_stream *z;            /* for zfree function */
-{
-  int r;
-
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
-  if (r == Z_DATA_ERROR)
-    z->msg = "oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR)
-  {
-    inflate_trees_free(*tb, z);
-    z->msg = "incomplete dynamic bit lengths tree";
-    r = Z_DATA_ERROR;
-  }
-  return r;
-}
-
-
-local int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
-uInt nl;                /* number of literal/length codes */
-uInt nd;                /* number of distance codes */
-uIntf *c;               /* that many (total) code lengths */
-uIntf *bl;              /* literal desired/actual bit depth */
-uIntf *bd;              /* distance desired/actual bit depth */
-inflate_huft * FAR *tl; /* literal/length tree result */
-inflate_huft * FAR *td; /* distance tree result */
-z_stream *z;            /* for zfree function */
-{
-  int r;
-
-  /* build literal/length tree */
-  if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR)
-    {
-      inflate_trees_free(*tl, z);
-      z->msg = "incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    return r;
-  }
-
-  /* build distance tree */
-  if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
-  {
-    if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR) {
-#ifdef PKZIP_BUG_WORKAROUND
-      r = Z_OK;
-    }
-#else
-      inflate_trees_free(*td, z);
-      z->msg = "incomplete literal/length tree";
-      r = Z_DATA_ERROR;
-    }
-    inflate_trees_free(*tl, z);
-    return r;
-#endif
-  }
-
-  /* done */
-  return Z_OK;
-}
-
-
-/* build fixed tables only once--keep them here */
-local int fixed_lock = 0;
-local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
-local uInt fixed_left = FIXEDH;
-local inflate_huft fixed_mem[FIXEDH];
-local uInt fixed_bl;
-local uInt fixed_bd;
-local inflate_huft *fixed_tl;
-local inflate_huft *fixed_td;
-
-
-local voidpf falloc(q, n, s)
-voidpf q;        /* opaque pointer (not used) */
-uInt n;         /* number of items */
-uInt s;         /* size of item */
-{
-  Assert(s == sizeof(inflate_huft) && n <= fixed_left,
-         "inflate_trees falloc overflow");
-  if (q) s++; /* to make some compilers happy */
-  fixed_left -= n;
-  return (voidpf)(fixed_mem + fixed_left);
-}
-
-
-local void ffree(q, p, n)
-voidpf q;
-voidpf p;
-uInt n;
-{
-  Assert(0, "inflate_trees ffree called!");
-  if (q) q = p; /* to make some compilers happy */
-}
-
-
-local int inflate_trees_fixed(bl, bd, tl, td)
-uIntf *bl;               /* literal desired/actual bit depth */
-uIntf *bd;               /* distance desired/actual bit depth */
-inflate_huft * FAR *tl;  /* literal/length tree result */
-inflate_huft * FAR *td;  /* distance tree result */
-{
-  /* build fixed tables if not built already--lock out other instances */
-  while (++fixed_lock > 1)
-    fixed_lock--;
-  if (!fixed_built)
-  {
-    int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
-    z_stream z;         /* for falloc function */
-
-    /* set up fake z_stream for memory routines */
-    z.zalloc = falloc;
-    z.zfree = ffree;
-    z.opaque = Z_NULL;
-
-    /* literal table */
-    for (k = 0; k < 144; k++)
-      c[k] = 8;
-    for (; k < 256; k++)
-      c[k] = 9;
-    for (; k < 280; k++)
-      c[k] = 7;
-    for (; k < 288; k++)
-      c[k] = 8;
-    fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
-
-    /* distance table */
-    for (k = 0; k < 30; k++)
-      c[k] = 5;
-    fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
-
-    /* done */
-    fixed_built = 1;
-  }
-  fixed_lock--;
-  *bl = fixed_bl;
-  *bd = fixed_bd;
-  *tl = fixed_tl;
-  *td = fixed_td;
-  return Z_OK;
-}
-
-
-local int inflate_trees_free(t, z)
-inflate_huft *t;        /* table to free */
-z_stream *z;            /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q;
-
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  p = t;
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z, p, p->word.Nalloc * sizeof(inflate_huft));
-    p = q;
-  } 
-  return Z_OK;
-}
-
-/*+++++*/
-/* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-      START,    /* x: set up for LEN */
-      LEN,      /* i: get length/literal/eob next */
-      LENEXT,   /* i: getting length extra (have base) */
-      DIST,     /* i: get distance next */
-      DISTEXT,  /* i: getting distance extra */
-      COPY,     /* o: copying bytes in window, waiting for space */
-      LIT,      /* o: got literal, waiting for output space */
-      WASH,     /* o: got eob, possibly still output waiting */
-      END,      /* x: got eob and all data flushed */
-      BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
-
-  /* mode dependent information */
-  uInt len;
-  union {
-    struct {
-      inflate_huft *tree;       /* pointer into tree */
-      uInt need;                /* bits needed */
-    } code;             /* if LEN or DIST, where in tree */
-    uInt lit;           /* if LIT, literal */
-    struct {
-      uInt get;                 /* bits to get for extra */
-      uInt dist;                /* distance back to copy from */
-    } copy;             /* if EXT or COPY, where and how much */
-  } sub;                /* submode */
-
-  /* mode independent information */
-  Byte lbits;           /* ltree bits decoded per branch */
-  Byte dbits;           /* dtree bits decoder per branch */
-  inflate_huft *ltree;          /* literal/length/eob tree */
-  inflate_huft *dtree;          /* distance tree */
-
-};
-
-
-local inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
-uInt bl, bd;
-inflate_huft *tl, *td;
-z_stream *z;
-{
-  inflate_codes_statef *c;
-
-  if ((c = (inflate_codes_statef *)
-       ZALLOC(z,1,sizeof(struct inflate_codes_state))) != Z_NULL)
-  {
-    c->mode = START;
-    c->lbits = (Byte)bl;
-    c->dbits = (Byte)bd;
-    c->ltree = tl;
-    c->dtree = td;
-    Tracev((stderr, "inflate:       codes new\n"));
-  }
-  return c;
-}
-
-
-local int inflate_codes(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
-  uInt j;               /* temporary storage */
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  Bytef *f;             /* pointer to copy strings from */
-  inflate_codes_statef *c = s->sub.decode.codes;  /* codes state */
-
-  /* copy input/output information to locals (UPDATE macro restores) */
-  LOAD
-
-  /* process input and output based on current state */
-  while (1) switch (c->mode)
-  {             /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-    case START:         /* x: set up for LEN */
-#ifndef SLOW
-      if (m >= 258 && n >= 10)
-      {
-        UPDATE
-        r = inflate_fast(c->lbits, c->dbits, c->ltree, c->dtree, s, z);
-        LOAD
-        if (r != Z_OK)
-        {
-          c->mode = r == Z_STREAM_END ? WASH : BADCODE;
-          break;
-        }
-      }
-#endif /* !SLOW */
-      c->sub.code.need = c->lbits;
-      c->sub.code.tree = c->ltree;
-      c->mode = LEN;
-    case LEN:           /* i: get length/literal/eob next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e == 0)               /* literal */
-      {
-        c->sub.lit = t->base;
-        Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                 "inflate:         literal '%c'\n" :
-                 "inflate:         literal 0x%02x\n", t->base));
-        c->mode = LIT;
-        break;
-      }
-      if (e & 16)               /* length */
-      {
-        c->sub.copy.get = e & 15;
-        c->len = t->base;
-        c->mode = LENEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      if (e & 32)               /* end of block */
-      {
-        Tracevv((stderr, "inflate:         end of block\n"));
-        c->mode = WASH;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid literal/length code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case LENEXT:        /* i: getting length extra (have base) */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->len += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      c->sub.code.need = c->dbits;
-      c->sub.code.tree = c->dtree;
-      Tracevv((stderr, "inflate:         length %u\n", c->len));
-      c->mode = DIST;
-    case DIST:          /* i: get distance next */
-      j = c->sub.code.need;
-      NEEDBITS(j)
-      t = c->sub.code.tree + ((uInt)b & inflate_mask[j]);
-      DUMPBITS(t->bits)
-      e = (uInt)(t->exop);
-      if (e & 16)               /* distance */
-      {
-        c->sub.copy.get = e & 15;
-        c->sub.copy.dist = t->base;
-        c->mode = DISTEXT;
-        break;
-      }
-      if ((e & 64) == 0)        /* next table */
-      {
-        c->sub.code.need = e;
-        c->sub.code.tree = t->next;
-        break;
-      }
-      c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid distance code";
-      r = Z_DATA_ERROR;
-      LEAVE
-    case DISTEXT:       /* i: getting distance extra */
-      j = c->sub.copy.get;
-      NEEDBITS(j)
-      c->sub.copy.dist += (uInt)b & inflate_mask[j];
-      DUMPBITS(j)
-      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
-      c->mode = COPY;
-    case COPY:          /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
-      f = (uInt)(q - s->window) < c->sub.copy.dist ?
-          s->end - (c->sub.copy.dist - (q - s->window)) :
-          q - c->sub.copy.dist;
-#else
-      f = q - c->sub.copy.dist;
-      if ((uInt)(q - s->window) < c->sub.copy.dist)
-        f = s->end - (c->sub.copy.dist - (q - s->window));
-#endif
-      while (c->len)
-      {
-        NEEDOUT
-        OUTBYTE(*f++)
-        if (f == s->end)
-          f = s->window;
-        c->len--;
-      }
-      c->mode = START;
-      break;
-    case LIT:           /* o: got literal, waiting for output space */
-      NEEDOUT
-      OUTBYTE(c->sub.lit)
-      c->mode = START;
-      break;
-    case WASH:          /* o: got eob, possibly more output */
-      FLUSH
-      if (s->read != s->write)
-        LEAVE
-      c->mode = END;
-    case END:
-      r = Z_STREAM_END;
-      LEAVE
-    case BADCODE:       /* x: got error */
-      r = Z_DATA_ERROR;
-      LEAVE
-    default:
-      r = Z_STREAM_ERROR;
-      LEAVE
-  }
-}
-
-
-local void inflate_codes_free(c, z)
-inflate_codes_statef *c;
-z_stream *z;
-{
-  ZFREE(z, c, sizeof(struct inflate_codes_state));
-  Tracev((stderr, "inflate:       codes free\n"));
-}
-
-/*+++++*/
-/* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* copy as much as possible from the sliding window to the output area */
-local int inflate_flush(s, z, r)
-inflate_blocks_statef *s;
-z_stream *z;
-int r;
-{
-  uInt n;
-  Bytef *p, *q;
-
-  /* local copies of source and destination pointers */
-  p = z->next_out;
-  q = s->read;
-
-  /* compute number of bytes to copy as far as end of window */
-  n = (uInt)((q <= s->write ? s->write : s->end) - q);
-  if (n > z->avail_out) n = z->avail_out;
-  if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-  /* update counters */
-  z->avail_out -= n;
-  z->total_out += n;
-
-  /* update check information */
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(s->check, q, n);
-
-  /* copy as far as end of window */
-  if (p != NULL) {
-    zmemcpy(p, q, n);
-    p += n;
-  }
-  q += n;
-
-  /* see if more to copy at beginning of window */
-  if (q == s->end)
-  {
-    /* wrap pointers */
-    q = s->window;
-    if (s->write == s->end)
-      s->write = s->window;
-
-    /* compute bytes to copy */
-    n = (uInt)(s->write - q);
-    if (n > z->avail_out) n = z->avail_out;
-    if (n && r == Z_BUF_ERROR) r = Z_OK;
-
-    /* update counters */
-    z->avail_out -= n;
-    z->total_out += n;
-
-    /* update check information */
-    if (s->checkfn != Z_NULL)
-      s->check = (*s->checkfn)(s->check, q, n);
-
-    /* copy */
-    if (p != NULL) {
-      zmemcpy(p, q, n);
-      p += n;
-    }
-    q += n;
-  }
-
-  /* update pointers */
-  z->next_out = p;
-  s->read = q;
-
-  /* done */
-  return r;
-}
-
-
-/*+++++*/
-/* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* macros for bit input with no checking and for returning unused bytes */
-#define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
-
-/* Called with number of bytes left to write in window at least 258
-   (the maximum string length) and number of input bytes available
-   at least ten.  The ten bytes are six bytes for the longest length/
-   distance pair plus four bytes for overloading the bit buffer. */
-
-local int inflate_fast(bl, bd, tl, td, s, z)
-uInt bl, bd;
-inflate_huft *tl, *td;
-inflate_blocks_statef *s;
-z_stream *z;
-{
-  inflate_huft *t;      /* temporary pointer */
-  uInt e;               /* extra bits or operation */
-  uLong b;              /* bit buffer */
-  uInt k;               /* bits in bit buffer */
-  Bytef *p;             /* input data pointer */
-  uInt n;               /* bytes available there */
-  Bytef *q;             /* output window write pointer */
-  uInt m;               /* bytes to end of window or read pointer */
-  uInt ml;              /* mask for literal/length tree */
-  uInt md;              /* mask for distance tree */
-  uInt c;               /* bytes to copy */
-  uInt d;               /* distance back to copy from */
-  Bytef *r;             /* copy source pointer */
-
-  /* load input, output, bit values */
-  LOAD
-
-  /* initialize masks */
-  ml = inflate_mask[bl];
-  md = inflate_mask[bd];
-
-  /* do until not enough input or output space for fast loop */
-  do {                          /* assume called with m >= 258 && n >= 10 */
-    /* get literal/length code */
-    GRABBITS(20)                /* max bits for literal/length code */
-    if ((e = (t = tl + ((uInt)b & ml))->exop) == 0)
-    {
-      DUMPBITS(t->bits)
-      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                "inflate:         * literal '%c'\n" :
-                "inflate:         * literal 0x%02x\n", t->base));
-      *q++ = (Byte)t->base;
-      m--;
-      continue;
-    }
-    do {
-      DUMPBITS(t->bits)
-      if (e & 16)
-      {
-        /* get extra bits for length */
-        e &= 15;
-        c = t->base + ((uInt)b & inflate_mask[e]);
-        DUMPBITS(e)
-        Tracevv((stderr, "inflate:         * length %u\n", c));
-
-        /* decode distance base of block to copy */
-        GRABBITS(15);           /* max bits for distance code */
-        e = (t = td + ((uInt)b & md))->exop;
-        do {
-          DUMPBITS(t->bits)
-          if (e & 16)
-          {
-            /* get extra bits to add to distance base */
-            e &= 15;
-            GRABBITS(e)         /* get extra bits (up to 13) */
-            d = t->base + ((uInt)b & inflate_mask[e]);
-            DUMPBITS(e)
-            Tracevv((stderr, "inflate:         * distance %u\n", d));
-
-            /* do the copy */
-            m -= c;
-            if ((uInt)(q - s->window) >= d)     /* offset before dest */
-            {                                   /*  just copy */
-              r = q - d;
-              *q++ = *r++;  c--;        /* minimum count is three, */
-              *q++ = *r++;  c--;        /*  so unroll loop a little */
-            }
-            else                        /* else offset after destination */
-            {
-              e = d - (q - s->window);  /* bytes from offset to end */
-              r = s->end - e;           /* pointer to offset */
-              if (c > e)                /* if source crosses, */
-              {
-                c -= e;                 /* copy to end of window */
-                do {
-                  *q++ = *r++;
-                } while (--e);
-                r = s->window;          /* copy rest from start of window */
-              }
-            }
-            do {                        /* copy all or what's left */
-              *q++ = *r++;
-            } while (--c);
-            break;
-          }
-          else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
-          else
-          {
-            z->msg = "invalid distance code";
-            UNGRAB
-            UPDATE
-            return Z_DATA_ERROR;
-          }
-        } while (1);
-        break;
-      }
-      if ((e & 64) == 0)
-      {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
-        {
-          DUMPBITS(t->bits)
-          Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
-                    "inflate:         * literal '%c'\n" :
-                    "inflate:         * literal 0x%02x\n", t->base));
-          *q++ = (Byte)t->base;
-          m--;
-          break;
-        }
-      }
-      else if (e & 32)
-      {
-        Tracevv((stderr, "inflate:         * end of block\n"));
-        UNGRAB
-        UPDATE
-        return Z_STREAM_END;
-      }
-      else
-      {
-        z->msg = "invalid literal/length code";
-        UNGRAB
-        UPDATE
-        return Z_DATA_ERROR;
-      }
-    } while (1);
-  } while (m >= 258 && n >= 10);
-
-  /* not enough input or output--restore pointers and return */
-  UNGRAB
-  UPDATE
-  return Z_OK;
-}
-
-
-/*+++++*/
-/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zutil.c,v 1.8 1995/05/03 17:27:12 jloup Exp */
-
-char *zlib_version = ZLIB_VERSION;
-
-char *z_errmsg[] = {
-"stream end",          /* Z_STREAM_END    1 */
-"",                    /* Z_OK            0 */
-"file error",          /* Z_ERRNO        (-1) */
-"stream error",        /* Z_STREAM_ERROR (-2) */
-"data error",          /* Z_DATA_ERROR   (-3) */
-"insufficient memory", /* Z_MEM_ERROR    (-4) */
-"buffer error",        /* Z_BUF_ERROR    (-5) */
-""};
-
-
-/*+++++*/
-/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp */
-
-#define BASE 65521L /* largest prime smaller than 65536 */
-#define NMAX 5552
-/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-
-#define DO1(buf)  {s1 += *buf++; s2 += s1;}
-#define DO2(buf)  DO1(buf); DO1(buf);
-#define DO4(buf)  DO2(buf); DO2(buf);
-#define DO8(buf)  DO4(buf); DO4(buf);
-#define DO16(buf) DO8(buf); DO8(buf);
-
-/* ========================================================================= */
-uLong adler32(adler, buf, len)
-    uLong adler;
-    Bytef *buf;
-    uInt len;
-{
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
-
-    if (buf == Z_NULL) return 1L;
-
-    while (len > 0) {
-        k = len < NMAX ? len : NMAX;
-        len -= k;
-        while (k >= 16) {
-            DO16(buf);
-            k -= 16;
-        }
-        if (k != 0) do {
-            DO1(buf);
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
-    }
-    return (s2 << 16) | s1;
-}
diff --git a/mdk-stage1/ppp/pppdump/zlib.h b/mdk-stage1/ppp/pppdump/zlib.h
deleted file mode 100644
index 9c7ac734d..000000000
--- a/mdk-stage1/ppp/pppdump/zlib.h
+++ /dev/null
@@ -1,631 +0,0 @@
-/*	$Id$	*/
-
-/*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
- * distribution by Jean-loup Gailly and Mark Adler, with some additions
- * by Paul Mackerras to aid in implementing Deflate compression and
- * decompression for PPP packets.
- */
-
-/* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 0.95, Aug 16th, 1995.
-
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-
-  Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
- */
-
-#ifndef _ZLIB_H
-#define _ZLIB_H
-
-/* #include "zconf.h" */	/* included directly here */
-
-/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
- */
-
-/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
-
-/*
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
- */
-
-/*
- * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
- * than 64k bytes at a time (needed on systems with 16-bit int).
- * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
- * at addresses which are not a multiple of their size.
- * Under DOS, -DFAR=far or -DFAR=__far may be needed.
- */
-
-#ifndef STDC
-#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
-#    define STDC
-#  endif
-#endif
-
-#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-#  include <unix.h>
-#endif
-
-/* Maximum value for memLevel in deflateInit2 */
-#ifndef MAX_MEM_LEVEL
-#  ifdef MAXSEG_64K
-#    define MAX_MEM_LEVEL 8
-#  else
-#    define MAX_MEM_LEVEL 9
-#  endif
-#endif
-
-#ifndef FAR
-#  define FAR
-#endif
-
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
-#ifndef MAX_WBITS
-#  define MAX_WBITS   15 /* 32K LZ77 window */
-#endif
-
-/* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
- that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
- plus a few kilobytes for small objects. For example, if you want to reduce
- the default memory requirements from 256K to 128K, compile with
-     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
- Of course this will generally degrade compression (there's no free lunch).
-
-   The memory requirements for inflate are (in bytes) 1 << windowBits
- that is, 32K for windowBits=15 (default value) plus a few kilobytes
- for small objects.
-*/
-
-                        /* Type declarations */
-
-#ifndef OF /* function prototypes */
-#  ifdef STDC
-#    define OF(args)  args
-#  else
-#    define OF(args)  ()
-#  endif
-#endif
-
-typedef unsigned char  Byte;  /* 8 bits */
-typedef unsigned int   uInt;  /* 16 bits or more */
-typedef unsigned long  uLong; /* 32 bits or more */
-
-typedef Byte FAR Bytef;
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
-typedef uLong FAR uLongf;
-
-#ifdef STDC
-   typedef void FAR *voidpf;
-   typedef void     *voidp;
-#else
-   typedef Byte FAR *voidpf;
-   typedef Byte     *voidp;
-#endif
-
-/* end of original zconf.h */
-
-#define ZLIB_VERSION "0.95P"
-
-/* 
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
-  stream interface.
-
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-*/
-
-typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
-typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
-
-struct internal_state;
-
-typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
-    uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
-
-    Bytef    *next_out; /* next output byte should be put there */
-    uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
-
-    char     *msg;      /* last error message, NULL if no error */
-    struct internal_state FAR *state; /* not visible by applications */
-
-    alloc_func zalloc;  /* used to allocate the internal state */
-    free_func  zfree;   /* used to free the internal state */
-    voidp      opaque;  /* private data object passed to zalloc and zfree */
-
-    Byte     data_type; /* best guess about the data type: ascii or binary */
-
-} z_stream;
-
-/*
-   The application must update next_in and avail_in when avail_in has
-   dropped to zero. It must update next_out and avail_out when avail_out
-   has dropped to zero. The application must initialize zalloc, zfree and
-   opaque before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application.
-
-   The opaque value provided by the application will be passed as the first
-   parameter for calls of zalloc and zfree. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   opaque value.
-
-   zalloc must return Z_NULL if there is not enough memory for the object.
-   On 16-bit systems, the functions zalloc and zfree must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by zalloc for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
-   The fields total_in and total_out can be used for statistics or
-   progress reports. After compression, total_in holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step).
-*/
-
-                        /* constants */
-
-#define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
-#define Z_FULL_FLUSH    2
-#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
-#define Z_FINISH        4
-#define Z_PACKET_FLUSH	5
-/* See deflate() below for the usage of these constants */
-
-#define Z_OK            0
-#define Z_STREAM_END    1
-#define Z_ERRNO        (-1)
-#define Z_STREAM_ERROR (-2)
-#define Z_DATA_ERROR   (-3)
-#define Z_MEM_ERROR    (-4)
-#define Z_BUF_ERROR    (-5)
-/* error codes for the compression/decompression functions */
-
-#define Z_BEST_SPEED             1
-#define Z_BEST_COMPRESSION       9
-#define Z_DEFAULT_COMPRESSION  (-1)
-/* compression levels */
-
-#define Z_FILTERED            1
-#define Z_HUFFMAN_ONLY        2
-#define Z_DEFAULT_STRATEGY    0
-
-#define Z_BINARY   0
-#define Z_ASCII    1
-#define Z_UNKNOWN  2
-/* Used to set the data_type field */
-
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
-
-extern char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
- */
-
-                        /* basic functions */
-
-extern int deflateInit OF((z_stream *strm, int level));
-/* 
-     Initializes the internal stream state for compression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.
-   If zalloc and zfree are set to Z_NULL, deflateInit updates them to
-   use default allocation functions.
-
-     The compression level must be Z_DEFAULT_COMPRESSION, or between 1 and 9:
-   1 gives best speed, 9 gives best compression. Z_DEFAULT_COMPRESSION requests
-   a default compromise between speed and compression (currently equivalent
-   to level 6).
-
-     deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if level is not a valid compression level.
-   msg is set to null if there is no error message.  deflateInit does not
-   perform any compression: this will be done by deflate().
-*/
-
-
-extern int deflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Compress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in and avail_in are updated and
-    processing will resume at this point for the next call of deflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-
-  Before the call of deflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating avail_in or avail_out accordingly; avail_out
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
-  block is terminated and flushed to the output buffer so that the
-  decompressor can get all input data available so far. For method 9, a future
-  variant on method 8, the current block will be flushed but not terminated.
-  If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
-  special marker is output and the compression dictionary is discarded; this
-  is useful to allow the decompressor to synchronize if one compressed block
-  has been damaged (see inflateSync below).  Flushing degrades compression and
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
-  seriously degrade the compression. If deflate returns with avail_out == 0,
-  this function must be called again with the same value of the flush
-  parameter and more output space (updated avail_out), until the flush is
-  complete (deflate returns with non-zero avail_out).
-
-    If the parameter flush is set to Z_PACKET_FLUSH, the compression
-  block is terminated, and a zero-length stored block is output,
-  omitting the length bytes (the effect of this is that the 3-bit type
-  code 000 for a stored block is output, and the output is then
-  byte-aligned).  This is designed for use at the end of a PPP packet.
-  In addition, if the current compression block contains all the data
-  since the last Z_PACKET_FLUSH, it is never output as a stored block.
-  If the current compression block output as a static or dynamic block
-  would not be at least `minCompression' bytes smaller than the
-  original data, then nothing is output for that block.  (The type
-  code for the zero-length stored block is still output, resulting in
-  a single zero byte being output for the whole packet.)
-  `MinCompression' is a parameter to deflateInit2, or 0 if deflateInit
-  is used.
-
-    If the parameter flush is set to Z_FINISH, all pending input is processed,
-  all pending output is flushed and deflate returns with Z_STREAM_END if there
-  was enough output space; if deflate returns with Z_OK, this function must be
-  called again with Z_FINISH and more output space (updated avail_out) but no
-  more input data, until it returns with Z_STREAM_END or an error. After
-  deflate has returned Z_STREAM_END, the only possible operations on the
-  stream are deflateReset or deflateEnd.
-  
-    Z_FINISH can be used immediately after deflateInit if all the compression
-  is to be done in a single step. In this case, avail_out must be at least
-  0.1% larger than avail_in plus 12 bytes.  If deflate does not return
-  Z_STREAM_END, then it must be called again as described above.
-
-    deflate() may update data_type if it can make a good guess about
-  the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-
-    deflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if all input has been
-  consumed and all output has been produced (only when flush is set to
-  Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
-*/
-
-
-extern int deflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
-   stream state was inconsistent. In the error case, msg may be set
-   but then points to a static string (which must not be deallocated).
-*/
-
-
-extern int inflateInit OF((z_stream *strm));
-/* 
-     Initializes the internal stream state for decompression. The fields
-   zalloc and zfree must be initialized before by the caller.  If zalloc and
-   zfree are set to Z_NULL, inflateInit updates them to use default allocation
-   functions.
-
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory.  msg is set to null if there is no error message.
-   inflateInit does not perform any decompression: this will be done by
-   inflate().
-*/
-
-
-extern int inflate OF((z_stream *strm, int flush));
-/*
-  Performs one or both of the following actions:
-
-  - Decompress more input starting at next_in and update next_in and avail_in
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), next_in is updated and processing
-    will resume at this point for the next call of inflate().
-
-  - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() always provides as much output as possible
-    (until there is no more input data or no more space in the output buffer).
-
-  Before the call of inflate(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (avail_out == 0), or after each
-  call of inflate().
-
-    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
-  inflate flushes as much output as possible to the output buffer. The
-  flushing behavior of inflate is not specified for values of the flush
-  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
-  current implementation actually flushes as much output as possible
-  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
-  has been consumed, it is expecting to see the length field of a stored
-  block; if not, it returns Z_DATA_ERROR.
-
-    inflate() should normally be called until it returns Z_STREAM_END or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of inflate), the parameter flush should be set to
-  Z_FINISH. In this case all pending input is processed and all pending
-  output is flushed; avail_out must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
-  is never required, but can be used to inform inflate that a faster routine
-  may be used for the single inflate() call.
-
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
-  the stream structure was inconsistent (for example if next_in or next_out
-  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
-  progress is possible or if there was not enough room in the output buffer
-  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
-  call inflateSync to look for a good compression block.  */
-
-
-extern int inflateEnd OF((z_stream *strm));
-/*
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-
-     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
-   was inconsistent. In the error case, msg may be set but then points to a
-   static string (which must not be deallocated).
-*/
-
-                        /* advanced functions */
-
-/*
-    The following functions are needed only in some special applications.
-*/
-
-extern int deflateInit2 OF((z_stream *strm,
-                            int  level,
-                            int  method,
-                            int  windowBits,
-                            int  memLevel,
-                            int  strategy,
-			    int  minCompression));
-/*   
-     This is another version of deflateInit with more compression options. The
-   fields next_in, zalloc and zfree must be initialized before by the caller.
-
-     The method parameter is the compression method. It must be 8 in this
-   version of the library. (Method 9 will allow a 64K history buffer and
-   partial block flushes.)
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
-   values of this parameter result in better compression at the expense of
-   memory usage. The default value is 15 if deflateInit is used instead.
-
-    The memLevel parameter specifies how much memory should be allocated
-   for the internal compression state. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.
-
-     The strategy parameter is used to tune the compression algorithm. Use
-   the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data
-   produced by a filter (or predictor), or Z_HUFFMAN_ONLY to force Huffman
-   encoding only (no string match).  Filtered data consists mostly of small
-   values with a somewhat random distribution. In this case, the
-   compression algorithm is tuned to compress them better. The strategy
-   parameter only affects the compression ratio but not the correctness of
-   the compressed output even if it is not set appropriately.
-
-     The minCompression parameter specifies the minimum reduction in size
-   required for a compressed block to be output when Z_PACKET_FLUSH is
-   used (see the description of deflate above).
-
-     If next_in is not null, the library will use this buffer to hold also
-   some history information; the buffer must either hold the entire input
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
-   is null, the library will allocate its own history buffer (and leave next_in
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate().
-*/
-                            
-extern int deflateCopy OF((z_stream *dest,
-                           z_stream *source));
-/*
-     Sets the destination stream as a complete copy of the source stream.  If
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
-
-     This function is useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling deflateEnd.  Note that deflateCopy duplicates the internal
-   compression state which can be quite large, so this strategy is slow and
-   can consume lots of memory.
-
-      deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
-   (such as zalloc being NULL). msg is left unchanged in both source and
-   destination.
-*/
-
-extern int deflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to deflateEnd followed by deflateInit,
-   but does not free and reallocate all the internal compression state.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by deflateInit2.
-
-      deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateInit2 OF((z_stream *strm,
-                            int  windowBits));
-/*   
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc and zfree must be initialized before by the caller.
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
-
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
-*/
-
-extern int inflateSync OF((z_stream *strm));
-/* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
-
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
-  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of total_in which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call inflateSync, providing more input each time,
-  until success or end of the input data.
-*/
-
-extern int inflateReset OF((z_stream *strm));
-/*
-     This function is equivalent to inflateEnd followed by inflateInit,
-   but does not free and reallocate all the internal decompression state.
-   The stream will keep attributes that may have been set by inflateInit2.
-
-      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
-   stream state was inconsistent (such as zalloc or state being NULL).
-*/
-
-extern int inflateIncomp OF((z_stream *strm));
-/*
-     This function adds the data at next_in (avail_in bytes) to the output
-   history without performing any output.  There must be no pending output,
-   and the decompressor must be expecting to see the start of a block.
-   Calling this function is equivalent to decompressing a stored block
-   containing the data at next_in (except that the data is not output).
-*/
-
-                        /* checksum functions */
-
-/*
-     This function is not related to compression but is exported
-   anyway because it might be useful in applications using the
-   compression library.
-*/
-
-extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
-
-/*
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-
-     uLong adler = adler32(0L, Z_NULL, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       adler = adler32(adler, buffer, length);
-     }
-     if (adler != original_adler) error();
-*/
-
-#ifndef _Z_UTIL_H
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
-#endif
-
-#endif /* _ZLIB_H */
diff --git a/mdk-stage1/ppp/pppstats/Makefile.linux b/mdk-stage1/ppp/pppstats/Makefile.linux
deleted file mode 100644
index ef0764c5d..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.linux
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-PPPSTATSRCS = pppstats.c
-PPPSTATOBJS = pppstats.o
-
-#CC = gcc
-COPTS = -O
-COMPILE_FLAGS = -D_linux_ -I../include
-LIBS =
-
-INSTALL= install -o root -g daemon
-
-CFLAGS = $(COPTS) $(COMPILE_FLAGS)
-
-all: pppstats
-
-install: pppstats
-	$(INSTALL) -s -c pppstats $(BINDIR)/pppstats
-	$(INSTALL) -c -m 444 pppstats.8 $(MANDIR)/man8/pppstats.8
-
-pppstats: $(PPPSTATSRCS)
-	$(CC) $(CFLAGS) -o pppstats pppstats.c $(LIBS)
-
-clean:
-	rm -f pppstats *~ #* core
-
-depend:
-	cpp -M $(CFLAGS) $(PPPSTATSRCS) >.depend
-#	makedepend $(CFLAGS) $(PPPSTATSRCS)
diff --git a/mdk-stage1/ppp/pppstats/Makefile.sol2 b/mdk-stage1/ppp/pppstats/Makefile.sol2
deleted file mode 100644
index a6544e61b..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.sol2
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# pppstats Makefile for SVR4 systems
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CFLAGS = -DSTREAMS -I../include $(COPTS)
-
-all: pppstats
-
-pppstats: pppstats.c
-	$(CC) $(CFLAGS) -o pppstats pppstats.c
-
-install: pppstats
-	$(INSTALL) -f $(BINDIR) pppstats
-	$(INSTALL) -m 444 -f $(MANDIR)/man8 pppstats.8
-
-clean:
-	rm -f pppstats *~ core
diff --git a/mdk-stage1/ppp/pppstats/Makefile.sunos4 b/mdk-stage1/ppp/pppstats/Makefile.sunos4
deleted file mode 100644
index 2a036f28f..000000000
--- a/mdk-stage1/ppp/pppstats/Makefile.sunos4
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# pppstats makefile
-# $Id$
-#
-
-include ../sunos4/Makedefs
-
-PPPSTATSRCS = pppstats.c
-PPPSTATOBJS = pppstats.o
-
-COMPILE_FLAGS = -DSTREAMS -DSUNOS4
-LIBS =
-
-CFLAGS = -I../include $(COPTS) $(COMPILE_FLAGS)
-
-all: pppstats
-
-install: pppstats
-	$(INSTALL) -c pppstats $(BINDIR)/pppstats
-	$(INSTALL) -c -m 444 pppstats.8 $(MANDIR)/man8/pppstats.8
-
-pppstats: $(PPPSTATSRCS)
-	$(CC) $(CFLAGS) -o pppstats pppstats.c $(LIBS)
-
-clean:
-	rm -f pppstats *~ #* core
-
-depend:
-	cpp -M $(CFLAGS) $(PPPSTATSRCS) >.depend
-#	makedepend $(CFLAGS) $(PPPSTATSRCS)
diff --git a/mdk-stage1/ppp/pppstats/pppstats.8 b/mdk-stage1/ppp/pppstats/pppstats.8
deleted file mode 100644
index 1ba8d5779..000000000
--- a/mdk-stage1/ppp/pppstats/pppstats.8
+++ /dev/null
@@ -1,217 +0,0 @@
-.\"	@(#) $Id$
-.TH PPPSTATS 8 "26 June 1995"
-.SH NAME
-pppstats \- print PPP statistics
-.SH SYNOPSIS
-.B pppstats
-[
-.B -a
-] [
-.B -v
-] [
-.B -r
-] [
-.B -z
-] [
-.B -c
-.I <count>
-] [
-.B -w
-.I <secs>
-] [
-.I interface
-]
-.ti 12
-.SH DESCRIPTION
-The
-.B pppstats
-utility reports PPP-related statistics at regular intervals for the
-specified PPP interface.  If the interface is unspecified, it will
-default to ppp0.
-The display is split horizontally
-into input and output sections containing columns of statistics
-describing the properties and volume of packets received and
-transmitted by the interface.
-.PP
-The options are as follows:
-.TP
-.B -a
-Display absolute values rather than deltas.  With this option, all
-reports show statistics for the time since the link was initiated.
-Without this option, the second and subsequent reports show statistics
-for the time since the last report.
-.TP
-.B -c \fIcount
-Repeat the display
-.I count
-times.  If this option is not specified, the default repeat count is 1
-if the
-.B -w
-option is not specified, otherwise infinity.
-.TP
-.B -r
-Display additional statistics summarizing the compression ratio
-achieved by the packet compression algorithm in use.
-.TP
-.B -v
-Display additional statistics relating to the performance of the Van
-Jacobson TCP header compression algorithm.
-.TP
-.B -w \fIwait
-Pause
-.I wait
-seconds between each display.  If this option is not specified, the
-default interval is 5 seconds.
-.TP
-.B -z
-Instead of the standard display, show statistics indicating the
-performance of the packet compression algorithm in use.
-.PP
-The following fields are printed on the input side when the
-.B -z
-option is not used:
-.TP
-.B IN
-The total number of bytes received by this interface.
-.TP
-.B PACK
-The total number of packets received by this interface.
-.TP
-.B VJCOMP
-The number of header-compressed TCP packets received by this interface.
-.TP
-.B VJUNC
-The number of header-uncompressed TCP packets received by this
-interface.  Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJERR
-The number of corrupted or bogus header-compressed TCP packets
-received by this interface.  Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJTOSS
-The number of VJ header-compressed TCP packets dropped on reception by
-this interface because of preceding errors.  Only reported when the
-.B -v
-option is specified.
-.TP
-.B NON-VJ
-The total number of non-TCP packets received by this interface. Only
-reported when the
-.B -v
-option is specified.
-.TP
-.B RATIO
-The compression ratio achieved for received packets by the
-packet compression scheme in use, defined as the uncompressed size
-divided by the compressed size.
-Only reported when the
-.B -r
-option is specified.
-.TP
-.B UBYTE
-The total number of bytes received, after decompression of compressed
-packets.  Only reported when the
-.B -r
-option is specified.
-.PP
-The following fields are printed on the output side:
-.TP
-.B OUT
-The total number of bytes transmitted from this interface.
-.TP
-.B PACK
-The total number of packets transmitted from this interface.
-.TP
-.B VJCOMP
-The number of TCP packets transmitted from this interface with
-VJ-compressed TCP headers.
-.TP
-.B VJUNC
-The number of TCP packets transmitted from this interface with
-VJ-uncompressed TCP headers.
-Not reported when the
-.B -r
-option is specified.
-.TP
-.B NON-VJ
-The total number of non-TCP packets transmitted from this interface.
-Not reported when the
-.B -r
-option is specified.
-.TP
-.B VJSRCH
-The number of searches for the cached header entry for a VJ header
-compressed TCP packet.  Only reported when the
-.B -v
-option is specified.
-.TP
-.B VJMISS
-The number of failed searches for the cached header entry for a
-VJ header compressed TCP packet.  Only reported when the
-.B -v
-option is specified.
-.TP
-.B RATIO
-The compression ratio achieved for transmitted packets by the
-packet compression scheme in use, defined as the size
-before compression divided by the compressed size.
-Only reported when the
-.B -r
-option is specified.
-.TP
-.B UBYTE
-The total number of bytes to be transmitted, before packet compression
-is applied.  Only reported when the
-.B -r
-option is specified.
-.PP
-When the
-.B -z
-option is specified,
-.Nm pppstats
-instead displays the following fields, relating to the packet
-compression algorithm currently in use.  If packet compression is not
-in use, these fields will all display zeroes.  The fields displayed on
-the input side are:
-.TP
-.B COMPRESSED BYTE
-The number of bytes of compressed packets received.
-.TP
-.B COMPRESSED PACK
-The number of compressed packets received.
-.TP
-.B INCOMPRESSIBLE BYTE
-The number of bytes of incompressible packets (that is, those which
-were transmitted in uncompressed form) received.
-.TP
-.B INCOMPRESSIBLE PACK
-The number of incompressible packets received.
-.TP
-.B COMP RATIO
-The recent compression ratio for incoming packets, defined as the
-uncompressed size divided by the compressed size (including both
-compressible and incompressible packets).
-.PP
-The fields displayed on the output side are:
-.TP
-.B COMPRESSED BYTE
-The number of bytes of compressed packets transmitted.
-.TP
-.B COMPRESSED PACK
-The number of compressed packets transmitted.
-.TP
-.B INCOMPRESSIBLE BYTE
-The number of bytes of incompressible packets transmitted (that is,
-those which were transmitted in uncompressed form).
-.TP
-.B INCOMPRESSIBLE PACK
-The number of incompressible packets transmitted.
-.TP
-.B COMP RATIO
-The recent compression ratio for outgoing packets.
-.SH SEE ALSO
-pppd(8)
diff --git a/mdk-stage1/ppp/pppstats/pppstats.c b/mdk-stage1/ppp/pppstats/pppstats.c
deleted file mode 100644
index 77b803723..000000000
--- a/mdk-stage1/ppp/pppstats/pppstats.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * print PPP statistics:
- * 	pppstats [-a|-d] [-v|-r|-z] [-c count] [-w wait] [interface]
- *
- *   -a Show absolute values rather than deltas
- *   -d Show data rate (kB/s) rather than bytes
- *   -v Show more stats for VJ TCP header compression
- *   -r Show compression ratio
- *   -z Show compression statistics instead of default display
- *
- * History:
- *      perkins@cps.msu.edu: Added compression statistics and alternate 
- *                display. 11/94
- *	Brad Parker (brad@cayman.com) 6/92
- *
- * from the original "slstats" by Van Jacobson
- *
- * Copyright (c) 1989 Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms are permitted
- * provided that the above copyright notice and this paragraph are
- * duplicated in all such forms and that any documentation,
- * advertising materials, and other materials related to such
- * distribution and use acknowledge that the software was developed
- * by the University of California, Berkeley.  The name of the
- * University may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __STDC__
-#define const
-#endif
-
-#ifndef lint
-static const char rcsid[] = "$Id$";
-#endif
-
-#include <stdio.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/param.h>
-#include <sys/types.h>
-#include <sys/ioctl.h>
-
-#ifndef STREAMS
-#if defined(_linux_) && defined(__powerpc__) \
-    && (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-/* kludge alert! */
-#undef __GLIBC__
-#endif
-#include <sys/socket.h>		/* *BSD, Linux, NeXT, Ultrix etc. */
-#ifndef _linux_
-#include <net/if.h>
-#include <net/ppp_defs.h>
-#include <net/if_ppp.h>
-#else
-/* Linux */
-#if __GLIBC__ >= 2
-#include <asm/types.h>		/* glibc 2 conflicts with linux/types.h */
-#include <net/if.h>
-#else
-#include <linux/types.h>
-#include <linux/if.h>
-#endif
-#include <linux/ppp_defs.h>
-#include <linux/if_ppp.h>
-#endif /* _linux_ */
-
-#else	/* STREAMS */
-#include <sys/stropts.h>	/* SVR4, Solaris 2, SunOS 4, OSF/1, etc. */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-
-#endif	/* STREAMS */
-
-int	vflag, rflag, zflag;	/* select type of display */
-int	aflag;			/* print absolute values, not deltas */
-int	dflag;			/* print data rates, not bytes */
-int	interval, count;
-int	infinite;
-int	unit;
-int	s;			/* socket or /dev/ppp file descriptor */
-int	signalled;		/* set if alarm goes off "early" */
-char	*progname;
-char	*interface;
-
-#if defined(SUNOS4) || defined(ULTRIX) || defined(NeXT)
-extern int optind;
-extern char *optarg;
-#endif
-
-/*
- * If PPP_DRV_NAME is not defined, use the legacy "ppp" as the
- * device name.
- */
-#if !defined(PPP_DRV_NAME)
-#define PPP_DRV_NAME    "ppp"
-#endif /* !defined(PPP_DRV_NAME) */
-
-static void usage __P((void));
-static void catchalarm __P((int));
-static void get_ppp_stats __P((struct ppp_stats *));
-static void get_ppp_cstats __P((struct ppp_comp_stats *));
-static void intpr __P((void));
-
-int main __P((int, char *argv[]));
-
-static void
-usage()
-{
-    fprintf(stderr, "Usage: %s [-a|-d] [-v|-r|-z] [-c count] [-w wait] [interface]\n",
-	    progname);
-    exit(1);
-}
-
-/*
- * Called if an interval expires before intpr has completed a loop.
- * Sets a flag to not wait for the alarm.
- */
-static void
-catchalarm(arg)
-    int arg;
-{
-    signalled = 1;
-}
-
-
-#ifndef STREAMS
-static void
-get_ppp_stats(curp)
-    struct ppp_stats *curp;
-{
-    struct ifpppstatsreq req;
-
-    memset (&req, 0, sizeof (req));
-
-#ifdef _linux_
-    req.stats_ptr = (caddr_t) &req.stats;
-#undef ifr_name
-#define ifr_name ifr__name
-#endif
-
-    strncpy(req.ifr_name, interface, sizeof(req.ifr_name));
-    if (ioctl(s, SIOCGPPPSTATS, &req) < 0) {
-	fprintf(stderr, "%s: ", progname);
-	if (errno == ENOTTY)
-	    fprintf(stderr, "kernel support missing\n");
-	else
-	    perror("couldn't get PPP statistics");
-	exit(1);
-    }
-    *curp = req.stats;
-}
-
-static void
-get_ppp_cstats(csp)
-    struct ppp_comp_stats *csp;
-{
-    struct ifpppcstatsreq creq;
-
-    memset (&creq, 0, sizeof (creq));
-
-#ifdef _linux_
-    creq.stats_ptr = (caddr_t) &creq.stats;
-#undef  ifr_name
-#define ifr_name ifr__name
-#endif
-
-    strncpy(creq.ifr_name, interface, sizeof(creq.ifr_name));
-    if (ioctl(s, SIOCGPPPCSTATS, &creq) < 0) {
-	fprintf(stderr, "%s: ", progname);
-	if (errno == ENOTTY) {
-	    fprintf(stderr, "no kernel compression support\n");
-	    if (zflag)
-		exit(1);
-	    rflag = 0;
-	} else {
-	    perror("couldn't get PPP compression stats");
-	    exit(1);
-	}
-    }
-
-#ifdef _linux_
-    if (creq.stats.c.bytes_out == 0) {
-	creq.stats.c.bytes_out = creq.stats.c.comp_bytes + creq.stats.c.inc_bytes;
-	creq.stats.c.in_count = creq.stats.c.unc_bytes;
-    }
-    if (creq.stats.c.bytes_out == 0)
-	creq.stats.c.ratio = 0.0;
-    else
-	creq.stats.c.ratio = 256.0 * creq.stats.c.in_count /
-			     creq.stats.c.bytes_out;
-
-    if (creq.stats.d.bytes_out == 0) {
-	creq.stats.d.bytes_out = creq.stats.d.comp_bytes + creq.stats.d.inc_bytes;
-	creq.stats.d.in_count = creq.stats.d.unc_bytes;
-    }
-    if (creq.stats.d.bytes_out == 0)
-	creq.stats.d.ratio = 0.0;
-    else
-	creq.stats.d.ratio = 256.0 * creq.stats.d.in_count /
-			     creq.stats.d.bytes_out;
-#endif
-
-    *csp = creq.stats;
-}
-
-#else	/* STREAMS */
-
-int
-strioctl(fd, cmd, ptr, ilen, olen)
-    int fd, cmd, ilen, olen;
-    char *ptr;
-{
-    struct strioctl str;
-
-    str.ic_cmd = cmd;
-    str.ic_timout = 0;
-    str.ic_len = ilen;
-    str.ic_dp = ptr;
-    if (ioctl(fd, I_STR, &str) == -1)
-	return -1;
-    if (str.ic_len != olen)
-	fprintf(stderr, "strioctl: expected %d bytes, got %d for cmd %x\n",
-	       olen, str.ic_len, cmd);
-    return 0;
-}
-
-static void
-get_ppp_stats(curp)
-    struct ppp_stats *curp;
-{
-    if (strioctl(s, PPPIO_GETSTAT, curp, 0, sizeof(*curp)) < 0) {
-	fprintf(stderr, "%s: ", progname);
-	if (errno == EINVAL)
-	    fprintf(stderr, "kernel support missing\n");
-	else
-	    perror("couldn't get PPP statistics");
-	exit(1);
-    }
-}
-
-static void
-get_ppp_cstats(csp)
-    struct ppp_comp_stats *csp;
-{
-    if (strioctl(s, PPPIO_GETCSTAT, csp, 0, sizeof(*csp)) < 0) {
-	fprintf(stderr, "%s: ", progname);
-	if (errno == ENOTTY) {
-	    fprintf(stderr, "no kernel compression support\n");
-	    if (zflag)
-		exit(1);
-	    rflag = 0;
-	} else {
-	    perror("couldn't get PPP compression statistics");
-	    exit(1);
-	}
-    }
-}
-
-#endif /* STREAMS */
-
-#define MAX0(a)		((int)(a) > 0? (a): 0)
-#define V(offset)	MAX0(cur.offset - old.offset)
-#define W(offset)	MAX0(ccs.offset - ocs.offset)
-
-#define RATIO(c, i, u)	((c) == 0? 1.0: (u) / ((double)(c) + (i)))
-#define CRATE(x)	RATIO(W(x.comp_bytes), W(x.inc_bytes), W(x.unc_bytes))
-
-#define KBPS(n)		((n) / (interval * 1000.0))
-
-/*
- * Print a running summary of interface statistics.
- * Repeat display every interval seconds, showing statistics
- * collected over that interval.  Assumes that interval is non-zero.
- * First line printed is cumulative.
- */
-static void
-intpr()
-{
-    register int line = 0;
-    sigset_t oldmask, mask;
-    char *bunit;
-    int ratef = 0;
-    struct ppp_stats cur, old;
-    struct ppp_comp_stats ccs, ocs;
-
-    memset(&old, 0, sizeof(old));
-    memset(&ocs, 0, sizeof(ocs));
-
-    while (1) {
-	get_ppp_stats(&cur);
-	if (zflag || rflag)
-	    get_ppp_cstats(&ccs);
-
-	(void)signal(SIGALRM, catchalarm);
-	signalled = 0;
-	(void)alarm(interval);
-
-	if ((line % 20) == 0) {
-	    if (zflag) {
-		printf("IN:  COMPRESSED  INCOMPRESSIBLE   COMP | ");
-		printf("OUT: COMPRESSED  INCOMPRESSIBLE   COMP\n");
-		bunit = dflag? "KB/S": "BYTE";
-		printf("    %s   PACK     %s   PACK  RATIO | ", bunit, bunit);
-		printf("    %s   PACK     %s   PACK  RATIO", bunit, bunit);
-	    } else {
-		printf("%8.8s %6.6s %6.6s",
-		       "IN", "PACK", "VJCOMP");
-
-		if (!rflag)
-		    printf(" %6.6s %6.6s", "VJUNC", "VJERR");
-		if (vflag)
-		    printf(" %6.6s %6.6s", "VJTOSS", "NON-VJ");
-		if (rflag)
-		    printf(" %6.6s %6.6s", "RATIO", "UBYTE");
-		printf("  | %8.8s %6.6s %6.6s",
-		       "OUT", "PACK", "VJCOMP");
-
-		if (!rflag)
-		    printf(" %6.6s %6.6s", "VJUNC", "NON-VJ");
-		if (vflag)
-		    printf(" %6.6s %6.6s", "VJSRCH", "VJMISS");
-		if (rflag)
-		    printf(" %6.6s %6.6s", "RATIO", "UBYTE");
-	    }
-	    putchar('\n');
-	}
-
-	if (zflag) {
-	    if (ratef) {
-		printf("%8.3f %6u %8.3f %6u %6.2f",
-		       KBPS(W(d.comp_bytes)),
-		       W(d.comp_packets),
-		       KBPS(W(d.inc_bytes)),
-		       W(d.inc_packets),
-		       ccs.d.ratio / 256.0);
-		printf(" | %8.3f %6u %8.3f %6u %6.2f",
-		       KBPS(W(c.comp_bytes)),
-		       W(c.comp_packets),
-		       KBPS(W(c.inc_bytes)),
-		       W(c.inc_packets),
-		       ccs.c.ratio / 256.0);
-	    } else {
-		printf("%8u %6u %8u %6u %6.2f",
-		       W(d.comp_bytes),
-		       W(d.comp_packets),
-		       W(d.inc_bytes),
-		       W(d.inc_packets),
-		       ccs.d.ratio / 256.0);
-		printf(" | %8u %6u %8u %6u %6.2f",
-		       W(c.comp_bytes),
-		       W(c.comp_packets),
-		       W(c.inc_bytes),
-		       W(c.inc_packets),
-		       ccs.c.ratio / 256.0);
-	    }
-	
-	} else {
-	    if (ratef)
-		printf("%8.3f", KBPS(V(p.ppp_ibytes)));
-	    else
-		printf("%8u", V(p.ppp_ibytes));
-	    printf(" %6u %6u",
-		   V(p.ppp_ipackets),
-		   V(vj.vjs_compressedin));
-	    if (!rflag)
-		printf(" %6u %6u",
-		       V(vj.vjs_uncompressedin),
-		       V(vj.vjs_errorin));
-	    if (vflag)
-		printf(" %6u %6u",
-		       V(vj.vjs_tossed),
-		       V(p.ppp_ipackets) - V(vj.vjs_compressedin)
-		       - V(vj.vjs_uncompressedin) - V(vj.vjs_errorin));
-	    if (rflag) {
-		printf(" %6.2f ", CRATE(d));
-		if (ratef)
-		    printf("%6.2f", KBPS(W(d.unc_bytes)));
-		else
-		    printf("%6u", W(d.unc_bytes));
-	    }
-	    if (ratef)
-		printf("  | %8.3f", KBPS(V(p.ppp_obytes)));
-	    else
-		printf("  | %8u", V(p.ppp_obytes));
-	    printf(" %6u %6u",
-		   V(p.ppp_opackets),
-		   V(vj.vjs_compressed));
-	    if (!rflag)
-		printf(" %6u %6u",
-		       V(vj.vjs_packets) - V(vj.vjs_compressed),
-		       V(p.ppp_opackets) - V(vj.vjs_packets));
-	    if (vflag)
-		printf(" %6u %6u",
-		       V(vj.vjs_searches),
-		       V(vj.vjs_misses));
-	    if (rflag) {
-		printf(" %6.2f ", CRATE(c));
-		if (ratef)
-		    printf("%6.2f", KBPS(W(c.unc_bytes)));
-		else
-		    printf("%6u", W(c.unc_bytes));
-	    }
-
-	}
-
-	putchar('\n');
-	fflush(stdout);
-	line++;
-
-	count--;
-	if (!infinite && !count)
-	    break;
-
-	sigemptyset(&mask);
-	sigaddset(&mask, SIGALRM);
-	sigprocmask(SIG_BLOCK, &mask, &oldmask);
-	if (!signalled) {
-	    sigemptyset(&mask);
-	    sigsuspend(&mask);
-	}
-	sigprocmask(SIG_SETMASK, &oldmask, NULL);
-	signalled = 0;
-	(void)alarm(interval);
-
-	if (!aflag) {
-	    old = cur;
-	    ocs = ccs;
-	    ratef = dflag;
-	}
-    }
-}
-
-int
-main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    int c;
-#ifdef STREAMS
-    char *dev;
-#endif
-
-    interface = PPP_DRV_NAME "0";
-    if ((progname = strrchr(argv[0], '/')) == NULL)
-	progname = argv[0];
-    else
-	++progname;
-
-    while ((c = getopt(argc, argv, "advrzc:w:")) != -1) {
-	switch (c) {
-	case 'a':
-	    ++aflag;
-	    break;
-	case 'd':
-	    ++dflag;
-	    break;
-	case 'v':
-	    ++vflag;
-	    break;
-	case 'r':
-	    ++rflag;
-	    break;
-	case 'z':
-	    ++zflag;
-	    break;
-	case 'c':
-	    count = atoi(optarg);
-	    if (count <= 0)
-		usage();
-	    break;
-	case 'w':
-	    interval = atoi(optarg);
-	    if (interval <= 0)
-		usage();
-	    break;
-	default:
-	    usage();
-	}
-    }
-    argc -= optind;
-    argv += optind;
-
-    if (!interval && count)
-	interval = 5;
-    if (interval && !count)
-	infinite = 1;
-    if (!interval && !count)
-	count = 1;
-    if (aflag)
-	dflag = 0;
-
-    if (argc > 1)
-	usage();
-    if (argc > 0)
-	interface = argv[0];
-
-    if (sscanf(interface, PPP_DRV_NAME "%d", &unit) != 1) {
-	fprintf(stderr, "%s: invalid interface '%s' specified\n",
-		progname, interface);
-    }
-
-#ifndef STREAMS
-    {
-	struct ifreq ifr;
-
-	s = socket(AF_INET, SOCK_DGRAM, 0);
-	if (s < 0) {
-	    fprintf(stderr, "%s: ", progname);
-	    perror("couldn't create IP socket");
-	    exit(1);
-	}
-
-#ifdef _linux_
-#undef  ifr_name
-#define ifr_name ifr_ifrn.ifrn_name
-#endif
-	strncpy(ifr.ifr_name, interface, sizeof(ifr.ifr_name));
-	if (ioctl(s, SIOCGIFFLAGS, (caddr_t)&ifr) < 0) {
-	    fprintf(stderr, "%s: nonexistent interface '%s' specified\n",
-		    progname, interface);
-	    exit(1);
-	}
-    }
-
-#else	/* STREAMS */
-#ifdef __osf__
-    dev = "/dev/streams/ppp";
-#else
-    dev = "/dev/" PPP_DRV_NAME;
-#endif
-    if ((s = open(dev, O_RDONLY)) < 0) {
-	fprintf(stderr, "%s: couldn't open ", progname);
-	perror(dev);
-	exit(1);
-    }
-    if (strioctl(s, PPPIO_ATTACH, &unit, sizeof(int), 0) < 0) {
-	fprintf(stderr, "%s: ppp%d is not available\n", progname, unit);
-	exit(1);
-    }
-
-#endif	/* STREAMS */
-
-    intpr();
-    exit(0);
-}
diff --git a/mdk-stage1/ppp/sample/auth-down b/mdk-stage1/ppp/sample/auth-down
deleted file mode 100644
index edde65db1..000000000
--- a/mdk-stage1/ppp/sample/auth-down
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# A program or script which is executed after the remote system
-# successfully authenticates itself. It is executed with the parameters
-# <interface-name> <peer-name> <user-name> <tty-device> <speed>
-#
-
-#
-# The environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-echo auth-down `date +'%y/%m/%d %T'` $* >> /var/log/pppstats
-
-# last line
diff --git a/mdk-stage1/ppp/sample/auth-up b/mdk-stage1/ppp/sample/auth-up
deleted file mode 100644
index 54722a3c0..000000000
--- a/mdk-stage1/ppp/sample/auth-up
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# A program or script which is executed after the remote system
-# successfully authenticates itself. It is executed with the parameters
-# <interface-name> <peer-name> <user-name> <tty-device> <speed>
-#
-
-#
-# The environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-echo auth-up `date +'%y/%m/%d %T'` $* >> /var/log/pppstats
-
-# last line
diff --git a/mdk-stage1/ppp/sample/ip-down b/mdk-stage1/ppp/sample/ip-down
deleted file mode 100644
index b771fb644..000000000
--- a/mdk-stage1/ppp/sample/ip-down
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-#
-# This script is run by the pppd _after_ the link is brought down.
-# It should be used to delete routes, unset IP addresses etc.
-#
-# This script is called with the following arguments:
-#    Arg  Name               Example
-#    $1   Interface name     ppp0
-#    $2   The tty            ttyS1
-#    $3   The link speed     38400
-#    $4   Local IP number    12.34.56.78
-#    $5   Peer  IP number    12.34.56.99
-#
-
-#
-# The  environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-# last line
diff --git a/mdk-stage1/ppp/sample/ip-up b/mdk-stage1/ppp/sample/ip-up
deleted file mode 100644
index 02bb71c44..000000000
--- a/mdk-stage1/ppp/sample/ip-up
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# This script is run by the pppd after the link is established.
-# It should be used to add routes, set IP address, run the mailq 
-# etc.
-#
-# This script is called with the following arguments:
-#    Arg  Name               Example
-#    $1   Interface name     ppp0
-#    $2   The tty            ttyS1
-#    $3   The link speed     38400
-#    $4   Local IP number    12.34.56.78
-#    $5   Peer  IP number    12.34.56.99
-#
-
-#
-# The  environment is cleared before executing this script
-# so the path must be reset
-#
-PATH=/usr/sbin:/sbin:/usr/bin:/bin
-export PATH
-
-# last line
diff --git a/mdk-stage1/ppp/sample/options b/mdk-stage1/ppp/sample/options
deleted file mode 100644
index 8d0a3f963..000000000
--- a/mdk-stage1/ppp/sample/options
+++ /dev/null
@@ -1,153 +0,0 @@
-# /etc/ppp/options
-
-# The name of this server. Often, the FQDN is used here.
-#name <host>
-
-# Enforce the use of the hostname as the name of the local system for
-# authentication purposes (overrides the name option).
-usehostname
-
-# If no local IP address is given, pppd will use the first IP address
-# that belongs to the local hostname. If "noipdefault" is given, this
-# is disabled and the peer will have to supply an IP address.
-noipdefault
-
-# With this option, pppd will accept the peer's idea of our local IP
-# address, even if the local IP address was specified in an option.
-#ipcp-accept-local
-
-# With this option, pppd will accept the peer's idea of its (remote) IP
-# address, even if the remote IP address was specified in an option.
-#ipcp-accept-remote
-
-# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
-# Two Servers can be remotely configured
-#ms-dns 192.168.1.1
-#ms-dns 192.168.1.2
-
-# Specify which WINS Servers the incoming connection Win95 or WinNT should use
-#wins-addr 192.168.1.50
-#wins-addr 192.168.1.51
-
-# enable this on a server that already has a permanent default route
-#nodefaultroute
-
-# Run the executable or shell command specified after pppd has terminated
-# the link.  This script could, for example, issue commands to the modem
-# to cause it to hang up if hardware modem control signals were not
-# available.
-# If mgetty is running, it will reset the modem anyway. So there is no need
-# to do it here.
-#disconnect "chat -- \d+++\d\c OK ath0 OK"
-
-# Increase debugging level (same as -d). The debug output is written
-# to syslog LOG_LOCAL2.
-debug
-
-# Enable debugging code in the kernel-level PPP driver.  The argument n
-# is a number which is the sum of the following values: 1 to enable
-# general debug messages, 2 to request that the contents of received
-# packets be printed, and 4 to request that the contents of transmitted
-# packets be printed.
-#kdebug n
-
-# Require the peer to authenticate itself before allowing network
-# packets to be sent or received.
-# Please do not disable this setting. It is expected to be standard in
-# future releases of pppd. Use the call option (see manpage) to disable
-# authentication for specific peers.
-#auth
-
-# authentication can either be pap or chap. As most people only want to
-# use pap, you can also disable chap:
-#require-pap
-#refuse-chap
-
-# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
-# on the serial port.
-crtscts
-
-# Specifies that pppd should use a UUCP-style lock on the serial device
-# to ensure exclusive access to the device.
-lock
-
-# Use the modem control lines.
-modem
-
-# async character map -- 32-bit hex; each bit is a character
-# that needs to be escaped for pppd to receive it.  0x00000001
-# represents '\x01', and 0x80000000 represents '\x1f'.
-# To allow pppd to work over a rlogin/telnet connection, ou should escape
-# XON (^Q), XOFF  (^S) and ^]: (The peer should use "escape ff".)
-#asyncmap  200a0000
-asyncmap 0
-
-# Specifies that certain characters should be escaped on transmission
-# (regardless of whether the peer requests them to be escaped with its
-# async control character map).  The characters to be escaped are
-# specified as a list of hex numbers separated by commas.  Note that
-# almost any character can be specified for the escape option, unlike
-# the asyncmap option which only allows control characters to be
-# specified.  The characters which may not be escaped are those with hex
-# values 0x20 - 0x3f or 0x5e.
-#escape 11,13,ff
-
-# Set the MRU [Maximum Receive Unit] value to <n> for negotiation.  pppd
-# will ask the peer to send packets of no more than <n> bytes. The
-# minimum MRU value is 128.  The default MRU value is 1500.  A value of
-# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
-# bytes of data).
-#mru 542
-
-# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
-# requests a smaller value via MRU negotiation, pppd will request that
-# the kernel networking code send data packets of no more than n bytes
-# through the PPP network interface.
-#mtu <n>
-
-# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
-# notation (e.g. 255.255.255.0).
-#netmask 255.255.255.0
-
-# Don't fork to become a background process (otherwise pppd will do so
-# if a serial device is specified).
-nodetach
-
-# Set the assumed name of the remote system for authentication purposes
-# to <n>.
-#remotename <n>
-
-# Add an entry to this system's ARP [Address Resolution Protocol]
-# table with the IP address of the peer and the Ethernet address of this
-# system. {proxyarp,noproxyarp}
-proxyarp
-
-# Use the system password database for authenticating the peer using
-# PAP. Note: mgetty already provides this option. If this is specified
-# then dialin from users using a script under Linux to fire up ppp wont work.
-#login
-
-# If this option is given, pppd will send an LCP echo-request frame to
-# the peer every n seconds. Under Linux, the echo-request is sent when
-# no packets have been received from the peer for n seconds. Normally
-# the peer should respond to the echo-request by sending an echo-reply.
-# This option can be used with the lcp-echo-failure option to detect
-# that the peer is no longer connected.
-lcp-echo-interval 30
-
-# If this option is given, pppd will presume the peer to be dead if n
-# LCP echo-requests are sent without receiving a valid LCP echo-reply.
-# If this happens, pppd will terminate the connection.  Use of this
-# option requires a non-zero value for the lcp-echo-interval parameter.
-# This option can be used to enable pppd to terminate after the physical
-# connection has been broken (e.g., the modem has hung up) in
-# situations where no hardware modem control lines are available.
-lcp-echo-failure 4
-
-# Specifies that pppd should disconnect if the link is idle for n seconds.
-idle 600
-
-# Disable the IPXCP and IPX protocols.
-noipx
-
-# ---<End of File>---
diff --git a/mdk-stage1/ppp/sample/options.ttyXX b/mdk-stage1/ppp/sample/options.ttyXX
deleted file mode 100644
index d4202f534..000000000
--- a/mdk-stage1/ppp/sample/options.ttyXX
+++ /dev/null
@@ -1,14 +0,0 @@
-# If you need to set up multiple serial lines then copy this file to
-# options.<ttyname> for each tty with a modem on it.
-#
-# The options.tty file will assign an IP address to each PPP connection
-# as it comes up. They must all be distinct!
-#
-# Example:
-# options.ttyS1		for com2 under DOS.
-#
-# Edit the following line so that the first IP address
-# mentioned is the ip address of the serial port while the second
-# is the IP address of your host
-#
-hostname-s1:hostname
diff --git a/mdk-stage1/ppp/sample/pap-secrets b/mdk-stage1/ppp/sample/pap-secrets
deleted file mode 100644
index 098971b9f..000000000
--- a/mdk-stage1/ppp/sample/pap-secrets
+++ /dev/null
@@ -1,28 +0,0 @@
-# Secrets for authentication using PAP
-# client	server	secret			IP addresses
-
-# OUTBOUND CONNECTIONS
-# Here you should add your userid password to connect to your providers via
-# pap. The * means that the password is to be used for ANY host you connect
-# to. Thus you do not have to worry about the foreign machine name. Just
-# replace password with your password.
-# If you have different providers with different passwords then you better
-# remove the following line.
-#hostname	*	password
-
-# INBOUND CONNECTIONS
-#client		hostname	<password>	192.168.1.1
-
-# If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config,
-# all users in /etc/passwd can use their password for pap-authentication.
-#
-# Every regular user can use PPP and has to use passwords from /etc/passwd
-#*	hostname	""
-# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any
-# other accounts that should not be able to use pppd! Replace hostname
-# with your local hostname.
-#guest		hostname	"*"	-
-#master		hostname	"*"	-
-#root		hostname	"*"	-
-#support	hostname	"*"	-
-#stats		hostname	"*"	-
diff --git a/mdk-stage1/ppp/scripts/README b/mdk-stage1/ppp/scripts/README
deleted file mode 100644
index 00e032ca6..000000000
--- a/mdk-stage1/ppp/scripts/README
+++ /dev/null
@@ -1,143 +0,0 @@
-This directory contains a set of scripts which have been used on Linux
-as well as Solaris 2.x systems to initiate or maintain a connection 
-with PPP.  The files in this directory were contributed by Al Longyear 
-(longyear@netcom.com) and Adi Masputra (adi.masputra@sun.com)
-
-------------------------------------------------------------------------
-
-1. README
-
-This file. You are reading it. It is just documentation.
-
-------------------------------------------------------------------------
-
-2. ppp-on
-
-This script will initiate a connection to the PPP system. It will run
-the chat program with the connection script as a parameter. This is a
-possible security hole. However, it is simple. It is meant to replace
-the previous version of ppp-on which was not very functional.
-
-The ppp-on script has entries for the account name, password, IP
-addresses, and telephone numbers. The parameters are passed to the
-pppd process and, then in turn, to the second part of the connect
-script, as a set of environment variables.
-
-Please make sure that you put the full path name to the ppp-on-dialer
-script in the reference to it in ppp-on.
-
-------------------------------------------------------------------------
-
-3. ppp-on-dialer
-
-This is the second part to the simple calling script, ppp-on.  It
-executes the chat program to connect the user with a standard UNIX
-style getty/login connection sequence.
-
-------------------------------------------------------------------------
-
-4. callback
-
-This script may be used in lieu of the ppp-on-dialer to permit the
-common modem callback sequence. You may need to make changes to the
-expected prompt string for the modem.
-
-The script works by disabling the system's detection of the DCD
-condition and working on the modem status message "NO CARRIER" which
-is generated when the modem disconnects.
-
-It is crude. It does work for my modem connection. Use as you see fit.
-
-------------------------------------------------------------------------
-
-5. redialer
-
-The redialer script is a replacement for the ppp-on-dialer script.  It
-will do 'attack dialing' or 'demon dialing' of one or more telephone
-numbers. The first number which responds will be used for a
-connection.
-
-There is a limit of ten attempts and a 15 second delay between dialing
-attempts. Both values are set in the script.
-
-------------------------------------------------------------------------
-
-6. ppp-off
-
-This is a script which will terminate the active ppp connection. Use
-as either "ppp-off" to terminate ppp0, or "ppp-off <device>" to
-terminate the connection on <device>. For example, "ppp-off ppp2" will
-terminate the ppp2 connection.
-
-------------------------------------------------------------------------
-
-7. secure-card
-
-This script was written by Jim Isaacson <jcisaac@crl.com>. It is a script
-for the 'expect' programming language used with Tcl. You need to have
-expect and Tcl installed before this script may be used.
-
-This script will operate with a device marketed under the name "SecureCARD".
-This little device is mated with its controller. On the credit card size
-device, there is a sequence number which changes on a random basis. In order
-for you to connect you need to enter a fixed portion of your account name
-and the number which is displayed on this card device. The number must match
-the value at the controller in order for the account name to be used.
-
-The problem is that chat uses fixed response strings. In addition, the
-timing for running the script may prevent the use of a script that reads the
-value before it starts the dial sequence. What was needed was a script which
-asked the user at the user's console at the time that it is needed.
-
-This led to the use of expect.
-
-------------------------------------------------------------------------
-
-8. ppp-on-rsh
-
-This script will initiate a PPP connection to a remote machine using rsh.
-This is implemented by creating a master/slave pseudo-tty with the slave 
-pointing to rsh, specifically with the 'pty' and 'notty' options of pppd. 
-It is assumed that the remote machine contains some sort of trust 
-mechanisms (such as ~/.rhosts, et al) to allow the local machine to 
-connect via rsh as root.
-
-------------------------------------------------------------------------
-
-9. ppp-on-ssh
-
-This script will initiate a PPP connection to a remote machine using the 
-secure shell, or ssh. I've only tested this on ssh 1.x, so those of you 
-who are running ssh 2.x mahy need to modify the ssh options slightly.
-This is implemented by creating a master/slave pseudo-ttyt with the slave 
-pointing to ssh, specifically with the 'pty' and 'notty' options of pppd. 
-It is assumed that the remote machine can accept the ssh connection from 
-the local host, in the sense that all ssh authentication mechanisms have 
-been properly configured, so that a remote root user can open a ssh 
-connection.
-
-------------------------------------------------------------------------
-
-10. options-rsh-loc & options-rsh-rem
-
-These options files accompany the ppp-on-rsh script mentioned above. In 
-theory, you'd want to copy the options-rsh-rem to the remote machine where 
-in.rshd is running. The only extra option required on the remote machine 
-options file is the 'notty' option. In addition, all ASCII control characters 
-[0x00 to 0x1f], plus 0xff, are escaped. This may need to be modified 
-depending on the rsh (or pseudo-tty) implementation which may differ across 
-platforms, for further optimizations.
-
-------------------------------------------------------------------------
-
-11. options-ssh-loc & options-ssh-rem
-
-These options files accompany the ppp-on-ssh script mentioned above. I've
-only tested this on ssh 1.x, so those of you who are running ssh 2.x need
-to modify the ssh options slightly. In theory, you'd want to copy the 
-options-ssh-rem to the remote machine where sshd daemon is running. The only 
-extra options required on the remote machine options file is the 'notty' 
-option. In addition, all ASCII control characters [0x00 to 0x1f], plus 0xff, 
-are escaped. This may need to be modified depending on the ssh (or 
-pseudo-tty) implementation which may differ across platforms, for further 
-optimizations.
diff --git a/mdk-stage1/ppp/scripts/callback b/mdk-stage1/ppp/scripts/callback
deleted file mode 100755
index 3e74e10b2..000000000
--- a/mdk-stage1/ppp/scripts/callback
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/sh
-###################################################################
-#
-# Script to dial the remote system, negotiate the connection, and send
-# it the id. Then wait for the modem to disconnect. Reset the modem
-# to answer mode and wait for the system to call back.
-#
-# The telephone number and modempass are used when establishing the
-# connection to the modem.
-#
-PHONE=555-1212
-MODEMPASS=modem_identifier
-#
-# Once the modem calls back, the account name and password are used for
-# a UNIX style login operation.
-#
-ACCOUNT=my_account_name
-PASSWORD=my_password
-
-###################################################################
-#
-# Step 1. Dial the modem and negotiate the initial dialog.
-#         note: the modem is configured to ignore loss of DCD at this point.
-#         it is important that this be performed because the loss of DCD
-#         will normally prevent system from working since 'modem' is used
-#         for pppd.
-#
-#         The script is terminated normally when the carrier is lost.
-#
-chat -v							\
-	TIMEOUT		3				\
-	ABORT		'\nBUSY\r'			\
-	ABORT		'\nNO ANSWER\r'			\
-	ABORT		'\nRINGING\r\n\r\nRINGING\r'	\
-	''		AT				\
-	'OK-+++\c-OK'	'AT&C0&D2S0=0H0			\
-	TIMEOUT		30				\
-	OK		ATDT$TELEPHONE			\
-	CONNECT		''				\
-	assword:	$MODEMPASS			\
-	"\nNO CARRIER\r"
-
-if [ "$?" = "0" ]; then
-
-###################################################################
-#
-# Step 2. Wait for the call back from the remote. This will wait for at most
-#         30 seconds for the call back should the first attempt fail or
-#         something happen with the callback logic at the remote.
-#
-#         note: when the callback occurs, the DCD setting is re-enabled.
-#
-# If some voice call should happen during this period, the system will
-# answer the telephone and then hang up on them. I realize that this is
-# rude, but there is little that this script can do.
-#
-  chat -v						\
-	TIMEOUT		30				\
-	ABORT		'\nVOICE\r'			\
-	'\nRING\r'	'AT&C1A'			\
-	CONNECT		''				\
-	TIMEOUT		10				\
-	ogin:--ogin:	$ACCOUNT			\
-	TIMEOUT		45				\
-	assword:	$PASSWORD
-
-  if [ "$?" = "0" ]; then
-    exit 0
-  fi
-fi
-
-###################################################################
-#
-# The script has failed. Terminate the connection mode.
-#
-chat -v TIMEOUT 3 "" AT 'OK-+++\c-OK' 'AT&C1&D2S0=0H0' OK
-exit 1
diff --git a/mdk-stage1/ppp/scripts/chat-callback b/mdk-stage1/ppp/scripts/chat-callback
deleted file mode 100644
index d014d6af3..000000000
--- a/mdk-stage1/ppp/scripts/chat-callback
+++ /dev/null
@@ -1,98 +0,0 @@
-# =====================================================================================
-# Chat script to dial our Company PPP account.
-# They uses a call-back system to identify us and to reverse
-# charge the call cost.
-# =====================================================================================
-#
-ECHO OFF
-# All the usual abort strings
-ABORT "NO CARRIER"
-ABORT "VOICE"
-ABORT "BUSY"
-ABORT "NO DIALTONE"
-ABORT "NO ANSWER"
-#
-# If calling outside allowed time we get this:
-#
-ABORT "Access denied"
-#
-# Modem initialisation stuff
-#
-TIMEOUT 5
-SAY "Initialising modem ...\n"
-'' ATE1
-'OK\r\n' ATS0=1S11=60X4&K4S42.1=1
-#
-# Now dial our ISP and wait for connection
-#
-SAY "Dialling our ISP ...\n"
-'OK\r\n' ATDT09834657
-TIMEOUT 60
-CONNECT \c
-SAY "Connected ...\n"
-#
-# This is the first stage login, we identify ourself so that the remote
-# system will agree to call us back.
-#
-TIMEOUT 30
-SAY "Sending Callback login ID ...\n"
-name:-BREAK-name: callme
-#
-# From now on, we must assume no carrier is normal as well
-# as receiving a HANGUP signal because it will be the
-# case if our ISP clears the call to call us back.
-#
-CLR_ABORT "NO CARRIER"
-HANGUP OFF
-#
-ABORT "Invalid"
-#
-# Now send password and wait to see what happens
-#
-SAY "Sending Callback password ...\n"
-word:--word:  xvsgsgs
-"You will be" \c
-#
-# What can happen now is:
-#   either: we get "You will be called back..." which is the successful case
-#   or:     we get "Invalid login" and we abort (bad login ID or password)
-#   or:     we get "NO CARRIER" because of an error, this will not abort
-#           and we will time out after 30 seconds
-#   or:     we get nothing and we will time out after 30 seconds
-#
-#
-# We reach here if we got "You will be called back..."
-#
-CLR_ABORT "Invalid"
-SAY "Now waiting for Call back ...\n"
-#
-# The remote system will now hangup and we will get both "NO CARRIER"
-# and a hangup signal which are ignored. We now wait for a connection
-# for up to 120 seconds. What happens here if somebody else calls before
-# the remote system is a bit dangerous:
-#
-#   If a malicious user connects and says 'name:', he will see 'PPPuser'
-#   If he then says 'word:' he will see the passowrd 'blipblop'. I may not
-#   know to which systems these belong to, though. It is up to you to consider 
-#   that case and decide wether the risk is too big or not ....
-#
-TIMEOUT 120
-"CONNECT" \c
-#
-# We have been called, re-arm ABORT on NO CARRIER and normal hangup signal
-# behaviour
-#
-HANGUP ON
-ABORT "NO CARRIER"
-#
-# Second stage login in order to start PPP
-#
-SAY "Remote system called back, logging in ...\n"
-SAY "Sending login ID ...\n"
-name:-BREAK-name: PPPuser
-SAY "Sending password ...\n"
-word:--word:  blipblop
-SAY "Asking to start PPP ...\n"
-'CnetSrv' "ppp default"
-"Entering PPP mode" \c
-SAY "ISP PPP started ...\n"
diff --git a/mdk-stage1/ppp/scripts/chatchat/README b/mdk-stage1/ppp/scripts/chatchat/README
deleted file mode 100644
index 88a4c6939..000000000
--- a/mdk-stage1/ppp/scripts/chatchat/README
+++ /dev/null
@@ -1,134 +0,0 @@
-v 0.1 gpk@onramp.net 3/27/99
-
-I Intro
-
-   This document covers the use of the modified "chat" program and its 
-adjunct "chatchat" to login using the Security Dynamics SecurID card
-on a linux system.
-
-   This set of files comprises a modified version of the chat program
-(the one distributed with ppp-2.3.5) and a new program called chatchat
-that allows you to supply data from the keyboard to the chat program.
-
-   The SecurID card generates passwords that have a lifetime of one
-minute and are used as a first layer in dial up security. The only
-software I know of for this card is for windows, so I wrote my own. 
-This software allows you to type in the time-sensitive password right
-when your chat script is asked to supply the passcode by the remote
-system. 
-
-
-II How It Works
-
-   This version of chat his an additional command that can be put into
-its options that says "Don't reply with this string. Open this pipe,
-read the contents, and reply with that instead." Chatchat creates a
-pipe and lets you type your passcode into it, then chat picks that up
-and sends it out just as though the passcode was hardcoded into the
-options. 
-
-
-III Installation 
-
-  I've provided intel binaries and source code the the modified chat 
-program and the chatchat program. I'll recommend that you copy the 
-chat.c program into your ppp-2.3.5/chat directory (save your original 
-chat.c program first!) and re-make it using the Makefile that comes 
-with chat. Copy the new chat somewhere into your path. (On my system
-chat lives in /usr/sbin/chat, so I've copied the modified one into 
-/usr/sbin/chat.new and changed my dial in script to call chat.new
-instead of chat.
-
-  Second, compile chatchat.c and install it somewhere in your path:
-
- gcc -g -o chatchat chatchat.c
- cp chatchat /usr/sbin
-
- Third, modify your chat script to use the chatchat program. Mine
-looks something like this:
-
-
-                       --------------------
-
-#!/bin/sh
-#
-# This is part 2 of the ppp-on script. It will perform the connection
-# protocol for the desired connection.
-# use atm0 to turn down the speaker volume on my sportster x2 voice modem
-# gpk 11/2/97
-
-exec /usr/sbin/chat.new  -V -v                       \
-         ABORT           "BUSY"                     \
-     ABORT              "NO DIAL TONE"      \
-         ABORT           "NO ANSWER"                \
-         TIMEOUT         50                             \
-         ""             "atm0"                  \
-         OK              ATDT$TELEPHONE                  \
-        CONNECT         ''       \
-    name:           \\da0xxxxxx  \
-    word:           @/var/tmp/p \
-        compress.       ''
-
-
-                     -----------------------
-
- This is a standard chat script:
-
-* abort if the modem is busy, you don't get a dial tone, no one
-  answers, or 50 seconds elapses.
-
-* use atm0 to mute the modem
-
-* dial the modem, when it connects, wait to be asked for account name
-
-* when we see "name:" prompt, delay briefly then respond with your 
-  account name (fill in your account name)
-
-Now we get to the new stuff:
-
-* when we see "word:" in the password prompt, instead of responding
-  with "@/var/tmp/p", the modified chat program will open the pipe 
-  /var/tmp/p, read the passcode out of there, and send it
-
-* when we see "compress." (the last word before ppp starts), reply
-  with nothing. The script ends and we start ppp.
-
-Note:
-
-* Make sure there is some whitespace between the filename and the \.
-
-
-IV Usage
-
-   To use this install the modified chat and chatchat programs, and
-modify your chat script similar to the above. Before you dial in,
-start that chatchat program giving it the same pipe as in your config
-file. In the above case:
-
-chatchat /var/tmp/p
-
-   Wait until you have one or two tick marks left on your card's
-current number, then start your dial up process that eventually calls
-chat. When chat goes to open and read the pipe, chatchat will prompt:
-
-
-type PIN into SecurID card and 
- enter resulting passcode:
-
-   At that point, type your PIN number into your Securid card, press
-the diamond, and type the resulting numbers in as your passcode. If
-you've left the -V -v options on your chat command you'll see
-everything so out, otherwise it works silently.
-
-   If you type the number wrong or run out of time, the server will 
-respond with an authentication failure. In that case you will have to 
-hang up and start again. I don't know how to build a conditional script 
-that says either expect "compress" next, but if you see "name:" again, 
-do this instead. 
-
-
-V Additional Information
-
-  You can obtain additional information about chat and ppp from the
-man pages for chat and pppd, as well as the PPP-HOWTO.
-
diff --git a/mdk-stage1/ppp/scripts/chatchat/chatchat.c b/mdk-stage1/ppp/scripts/chatchat/chatchat.c
deleted file mode 100644
index 4534fb9e3..000000000
--- a/mdk-stage1/ppp/scripts/chatchat/chatchat.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/* ************************************************************************* 
-* NAME: chatchat.c
-*
-* DESCRIPTION:
-*
-* This program creates a pipe for the chat process to read. The user
-* can supply information (like a password) that will be picked up
-* by chat and sent just like the regular contents of a chat script.
-*
-* Usage is:
-*
-* chatchat <filename>
-*
-*   where <filename> matches the option given in the chat script.
-*
-* for instance the chat script fragment:
-*
-*       ...
-*        name:           \\dmyname  \
-*        word:           @/var/tmp/p \
-*       ...
-*                                   ^
-*                    (note: leave some whitespace after the filename)
-*
-* expect "name:", reply with a delay followed by "myname"
-* expect "word:", reply with the data read from the pipe /var/tmp/p 
-*
-* the matching usage of chatchat would be:
-*
-* chatchat /var/tmp/p
-*
-* eg:
-*
-* $chatchat /var/tmp/p
-* ...
-*                           some other process eventually starts:
-*                           chat ...
-*                           chat parses the "@/var/tmp/p" option and opens
-*                              /var/tmp/p
-*  (chatchat prompts:)
-*
-* type PIN into SecurID card
-*   enter resulting passcode: [user inputs something]
-*
-*                           chat reads /var/tmp/p & gets what the
-*                              user typed at chatchat's "enter string" prompt
-*                           chat removes the pipe file
-*                           chat sends the user's input as a response in
-*                              place of "@/var/tmp/p"
-*                             
-* PROCESS:
-*
-* gcc -g -o chatchat chatchat.c
-*
-* 
-* GLOBALS: none
-*
-* REFERENCES:
-*
-* see the man pages and documentation that come with the 'chat' program
-* (part of the ppp package). you will need to use the modified chat
-* program that accepts the '@' operator.
-*
-* LIMITATIONS:
-*
-* REVISION HISTORY:
-*
-*   STR                Description                          Author
-*
-*   23-Mar-99          initial coding                        gpk
-*   12-May-99	       unlink the pipe after closing	     paulus
-*
-* TARGET: ANSI C
-* This program is in the public domain.
-* 
-*
-* ************************************************************************* */
-
-
-
-
-#include <sys/time.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <string.h>
-
-/* MAXINPUT - the data typed into chatchat must be fewer   */
-/* characters than this.                                 */
-
-#define MAXINPUT 80
-
-
-
-
-
-
-/* ************************************************************************* 
-
-
-   NAME:  main
-
-
-   USAGE: 
-
-   int argc;
-   char * argv[];
-
-   main(argc, argv[]);
-
-   returns: int
-
-   DESCRIPTION:
-                 if the pipe file name is given on the command line,
-		    create the pipe, prompt the user and put whatever
-		    is typed into the pipe.
-
-		 returns -1 on error
-		     else # characters entered
-   REFERENCES:
-
-   LIMITATIONS:
-
-   GLOBAL VARIABLES:
-
-      accessed: none
-
-      modified: none
-
-   FUNCTIONS CALLED:
-
-   REVISION HISTORY:
-
-        STR                  Description of Revision                 Author
-
-     25-Mar-99               initial coding                           gpk
-
- ************************************************************************* */
-
-int main(int argc, char * argv[])
-{
-  int retval;
-  
-  int create_and_write_pipe(char * pipename);
-
-  if (argc != 2)
-    {
-      fprintf(stderr, "usage: %s pipename\n", argv[0]);
-      retval = -1;
-    }
-  else
-    {
-     retval =  create_and_write_pipe(argv[1]);
-    }
-  return (retval);
-}
-
-
-
-
-/* ************************************************************************* 
-
-
-   NAME:  create_and_write_pipe
-
-
-   USAGE: 
-
-   int some_int;
-   char * pipename;
-
-   some_int =  create_and_write_pipe(pipename);
-
-   returns: int
-
-   DESCRIPTION:
-                 given the pipename, create the pipe, open it,
-		 prompt the user for a string to put into the
-		 pipe, write the string, and close the pipe
-
-		 on error, print out an error message and return -1
-		 
-		 returns -1 on error
-		   else #bytes written into the pipe
-   REFERENCES:
-
-   LIMITATIONS:
-
-   GLOBAL VARIABLES: 
-
-      accessed: none
-
-      modified: none
-
-   FUNCTIONS CALLED:
-
-   REVISION HISTORY:
-
-        STR                  Description of Revision                 Author
-
-     25-Mar-99               initial coding                           gpk
-     12-May-99		     remove pipe after closing		     paulus
-
- ************************************************************************* */
-
-int create_and_write_pipe(char * pipename)
-{
-  int retval, created, pipefd, nread, nwritten;
-  char input[MAXINPUT];
-  char errstring[180];
-  
-  int create_pipe(char * pipename);
-  int write_to_pipe(int pipefd, char * input, int nchar);
-
-  created = create_pipe(pipename);
-
-  if (-1 == created)
-    {
-      sprintf(errstring, "unable to create pipe '%s'", pipename);
-      perror(errstring);
-      retval = -1;
-    }
-  else
-    {
-
-      /* note: this open won't succeed until chat has the pipe  */
-      /* open and ready to read. this makes for nice timing.    */
-      
-      pipefd = open(pipename, O_WRONLY);
-
-      if (-1 == pipefd)
-	{
-	  sprintf(errstring, "unable to open pipe '%s'", pipename);
-	  perror(errstring);
-	  retval =  -1;
-	}
-      else
-	{
-	  fprintf(stderr, "%s \n %s",
-		  "type PIN into SecurID card and",
-		  "enter resulting passcode:");
-	  nread = read(STDIN_FILENO, (void *)input, MAXINPUT);
-
-	  
-	  if (0 >= nread)
-	    {
-	      perror("unable to read from stdin");
-	      retval = -1;
-	    }
-	  else
-	    {
-	      /* munch off the newline character, chat supplies  */
-	      /* a return when it sends the string out.          */
-	      input[nread -1] = 0;
-	      nread--;
-	      nwritten = write_to_pipe(pipefd, input, nread);
-	      /* printf("wrote [%d]: '%s'\n", nwritten, input); */
-	      retval = nwritten;
-	    }
-	  close(pipefd);
-
-	  /* Now make the pipe go away.  It won't actually go away
-	     completely until chat closes it. */
-	  if (unlink(pipename) < 0)
-	      perror("Warning: couldn't remove pipe");
-	}
-    }
-  return(retval);
-}
-
-
-
-
-
-
-
-/* ************************************************************************* 
-
-
-   NAME:  create_pipe
-
-
-   USAGE: 
-
-   int some_int;
-   char * pipename;
-   
-   some_int =  create_pipe(pipename);
-   
-   returns: int
-   
-   DESCRIPTION:
-                 create a pipe of the given name
-
-		 if there is an error (like the pipe already exists)
-		    print an error message and return
-		    
-		 return -1 on failure else success
-
-   REFERENCES:
-
-   LIMITATIONS:
-
-   GLOBAL VARIABLES:
-
-      accessed: none
-
-      modified: none
-
-   FUNCTIONS CALLED:
-
-   REVISION HISTORY:
-
-        STR                  Description of Revision                 Author
-
-     25-Mar-99               initial coding                           gpk
-
- ************************************************************************* */
-
-int create_pipe(char * pipename)
-{
-  mode_t old_umask;
-  int created;
-
-  /* hijack the umask temporarily to get the mode I want  */
-  /* on the pipe.                                         */
-  
-  old_umask = umask(000);
-
-  created = mknod(pipename, S_IFIFO | S_IRWXU | S_IWGRP | S_IWOTH,
-		  (dev_t)NULL);
-
-  /* now restore umask.  */
-  
-  (void)umask(old_umask);
-  
-  if (-1 == created)
-    {
-      perror("unable to create pipe");
-    }
-
-  return(created);
-}
-
-
-
-
-
-
-/* ************************************************************************* 
-
-
-   NAME:  write_to_pipe
-
-
-   USAGE: 
-
-   int some_int;
-   int pipefd;
-   char * input;
-   int nchar;
-
-   some_int =  write_to_pipe(pipefd, input, nchar);
-
-   returns: int
-
-   DESCRIPTION:
-                 write nchars of data from input to pipefd
-
-		 on error print a message to stderr
-
-		 return -1 on error, else # bytes written
-   REFERENCES:
-
-   LIMITATIONS:
-
-   GLOBAL VARIABLES:
-
-      accessed: none
-
-      modified: none
-
-   FUNCTIONS CALLED:
-
-   REVISION HISTORY:
-
-        STR                  Description of Revision                 Author
-
-     25-Mar-99               initial coding                           gpk
-     12-May-99		     don't write count word first	      paulus
-
- ************************************************************************* */
-
-int write_to_pipe(int pipefd, char * input, int nchar)
-{
-  int nwritten;
-
-  /* nwritten = write(pipefd, (void *)&nchar, sizeof(nchar)); */
-  nwritten = write(pipefd, (void *)input, nchar);
-
-  if (-1 == nwritten)
-    {
-      perror("unable to write to pipe");
-    }
-
-  return(nwritten);
-}
diff --git a/mdk-stage1/ppp/scripts/ip-down.local.add b/mdk-stage1/ppp/scripts/ip-down.local.add
deleted file mode 100644
index b93590e49..000000000
--- a/mdk-stage1/ppp/scripts/ip-down.local.add
+++ /dev/null
@@ -1,20 +0,0 @@
-
-#
-# This sample code shows you one way to modify your setup to allow automatic
-# configuration of your resolv.conf for peer supplied DNS addresses when using
-# the `usepeerdns' option.
-#
-# In my case I just added this to my /etc/ppp/ip-down.local script. You may need to 
-# create an executable script if one does not exist.
-#
-# Nick Walker (nickwalker@email.com)
-#
-
-if [ -n "$USEPEERDNS" -a -f /etc/ppp/resolv.conf ]; then
-	if [ -f /etc/ppp/resolv.prev ]; then
-		cp -f /etc/ppp/resolv.prev /etc/resolv.conf
-	else
-		rm -f /etc/resolv.conf
-	fi
-fi
-
diff --git a/mdk-stage1/ppp/scripts/ip-up.local.add b/mdk-stage1/ppp/scripts/ip-up.local.add
deleted file mode 100644
index 80172093a..000000000
--- a/mdk-stage1/ppp/scripts/ip-up.local.add
+++ /dev/null
@@ -1,24 +0,0 @@
-
-#
-# This sample code shows you one way to modify your setup to allow automatic
-# configuration of your resolv.conf for peer supplied DNS addresses when using
-# the `usepeerdns' option.
-#
-# In my case I just added this to my /etc/ppp/ip-up.local script. You may need to 
-# create an executable script if one does not exist.
-#
-# Nick Walker (nickwalker@email.com)
-#
-
-if [ -n "$USEPEERDNS" -a -f /etc/ppp/resolv.conf ]; then
-	rm -f /etc/ppp/resolv.prev
-	if [ -f /etc/resolv.conf ]; then
-		cp /etc/resolv.conf /etc/ppp/resolv.prev
-		grep domain /etc/ppp/resolv.prev > /etc/resolv.conf
-		grep search /etc/ppp/resolv.prev >> /etc/resolv.conf
-		cat /etc/ppp/resolv.conf >> /etc/resolv.conf
-	else
-		cp /etc/ppp/resolv.conf /etc
-	fi
-fi
-
diff --git a/mdk-stage1/ppp/scripts/options-rsh-loc b/mdk-stage1/ppp/scripts/options-rsh-loc
deleted file mode 100644
index b015b87fe..000000000
--- a/mdk-stage1/ppp/scripts/options-rsh-loc
+++ /dev/null
@@ -1 +0,0 @@
-debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1460
diff --git a/mdk-stage1/ppp/scripts/options-rsh-rem b/mdk-stage1/ppp/scripts/options-rsh-rem
deleted file mode 100644
index 4b10bb9e9..000000000
--- a/mdk-stage1/ppp/scripts/options-rsh-rem
+++ /dev/null
@@ -1 +0,0 @@
-notty debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1460
diff --git a/mdk-stage1/ppp/scripts/options-ssh-loc b/mdk-stage1/ppp/scripts/options-ssh-loc
deleted file mode 100644
index add03d659..000000000
--- a/mdk-stage1/ppp/scripts/options-ssh-loc
+++ /dev/null
@@ -1 +0,0 @@
-debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1400
diff --git a/mdk-stage1/ppp/scripts/options-ssh-rem b/mdk-stage1/ppp/scripts/options-ssh-rem
deleted file mode 100644
index d690722c6..000000000
--- a/mdk-stage1/ppp/scripts/options-ssh-rem
+++ /dev/null
@@ -1 +0,0 @@
-notty debug asyncmap FFFFFFFF escape FF kdebug 0 noipdefault nodefaultroute noauth mtu 1400
diff --git a/mdk-stage1/ppp/scripts/ppp-off b/mdk-stage1/ppp/scripts/ppp-off
deleted file mode 100755
index a22b5ea3d..000000000
--- a/mdk-stage1/ppp/scripts/ppp-off
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-######################################################################
-#
-# Determine the device to be terminated.
-#
-if [ "$1" = "" ]; then
-	DEVICE=ppp0
-else
-	DEVICE=$1
-fi
-
-######################################################################
-#
-# If the ppp0 pid file is present then the program is running. Stop it.
-if [ -r /var/run/$DEVICE.pid ]; then
-        kill -INT `cat /var/run/$DEVICE.pid`
-#
-# If the kill did not work then there is no process running for this
-# pid. It may also mean that the lock file will be left. You may wish
-# to delete the lock file at the same time.
-        if [ ! "$?" = "0" ]; then
-                rm -f /var/run/$DEVICE.pid
-                echo "ERROR: Removed stale pid file"
-                exit 1
-        fi
-#
-# Success. Let pppd clean up its own junk.
-        echo "PPP link to $DEVICE terminated."
-        exit 0
-fi
-#
-# The ppp process is not running for ppp0
-echo "ERROR: PPP link is not active on $DEVICE"
-exit 1
diff --git a/mdk-stage1/ppp/scripts/ppp-on b/mdk-stage1/ppp/scripts/ppp-on
deleted file mode 100755
index ab79db471..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-#
-# Script to initiate a ppp connection. This is the first part of the
-# pair of scripts. This is not a secure pair of scripts as the codes
-# are visible with the 'ps' command.  However, it is simple.
-#
-# These are the parameters. Change as needed.
-TELEPHONE=555-1212	# The telephone number for the connection
-ACCOUNT=george		# The account name for logon (as in 'George Burns')
-PASSWORD=gracie		# The password for this account (and 'Gracie Allen')
-LOCAL_IP=0.0.0.0	# Local IP address if known. Dynamic = 0.0.0.0
-REMOTE_IP=0.0.0.0	# Remote IP address if desired. Normally 0.0.0.0
-NETMASK=255.255.255.0	# The proper netmask if needed
-#
-# Export them so that they will be available at 'ppp-on-dialer' time.
-export TELEPHONE ACCOUNT PASSWORD
-# 
-# This is the location of the script which dials the phone and logs
-# in.  Please use the absolute file name as the $PATH variable is not
-# used on the connect option.  (To do so on a 'root' account would be
-# a security hole so don't ask.)
-#
-DIALER_SCRIPT=/etc/ppp/ppp-on-dialer
-#
-# Initiate the connection
-# 
-# I put most of the common options on this command. Please, don't
-# forget the 'lock' option or some programs such as mgetty will not
-# work. The asyncmap and escape will permit the PPP link to work with
-# a telnet or rlogin connection. You are welcome to make any changes
-# as desired. Don't use the 'defaultroute' option if you currently
-# have a default route to an ethernet gateway.
-#
-exec /usr/sbin/pppd debug lock modem crtscts /dev/ttyS0 38400 \
-	asyncmap 20A0000 escape FF kdebug 0 $LOCAL_IP:$REMOTE_IP \
-	noipdefault netmask $NETMASK defaultroute connect $DIALER_SCRIPT
diff --git a/mdk-stage1/ppp/scripts/ppp-on-dialer b/mdk-stage1/ppp/scripts/ppp-on-dialer
deleted file mode 100755
index 7d66765f1..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-dialer
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# This is part 2 of the ppp-on script. It will perform the connection
-# protocol for the desired connection.
-#
-exec chat -v						\
-	TIMEOUT		3				\
-	ABORT		'\nBUSY\r'			\
-	ABORT		'\nNO ANSWER\r'			\
-	ABORT		'\nRINGING\r\n\r\nRINGING\r'	\
-	''		\rAT				\
-	'OK-+++\c-OK'	ATH0				\
-	TIMEOUT		30				\
-	OK		ATDT$TELEPHONE			\
-	CONNECT		''				\
-	ogin:--ogin:	$ACCOUNT			\
-	assword:	$PASSWORD
diff --git a/mdk-stage1/ppp/scripts/ppp-on-rsh b/mdk-stage1/ppp/scripts/ppp-on-rsh
deleted file mode 100755
index 30a50dba6..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-rsh
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/sh
-#
-# A sample script to establish PPP session(s) via rsh
-#
-# Adi Masputra <adi.masputra@sun.com>
-# Jan 24, 2000
-#
-
-#
-# You'd definitely want to change the following addresses to suit
-# your network configuration
-#
-LOC_IP=10.0.0.1
-REM_IP=10.0.0.2
-NETMASK=255.255.0.0
-
-export LOC_IP REM_IP
-
-#
-# This is the remote peer where in.rshd is running, either
-# its hostname or IP address
-#
-PPPD_RHOST=myremotehost
-
-#
-# For this example, we assume that pppd on both local and remote
-# machines reside in the same place, /usr/local/bin/pppd
-#
-PPPD_LOC=/usr/local/bin/pppd
-
-#
-# The location of local options file (where rsh client is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example. In
-# reality, you'd probably want to remove such option.
-#
-PPPD_LOC_OPT=/etc/ppp/options-rsh-loc
-
-#
-# The location of remote options file (where in.rshd daemon is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example. In
-# reality, you'd probably want to remove such option. Also note that
-# the remote options file need to include the 'notty' option for this
-# to work
-#
-PPPD_REM_OPT=/etc/ppp/options-rsh-rem
-
-#
-# The location of rsh client on the local machine
-#
-RSH_LOC=/bin/rsh
-
-export PPPD_LOC PPPD_LOC_OPT PPPD_REM_OPT PPPD_RHOST RSH_LOC
-
-#
-# Uncomment the following to enable IPv6, note that the IPv6 support 
-# needs to be enabled during compilation
-#
-# PPPD_IPV6='+ipv6 ipv6cp-use-ipaddr'
-export PPPD_IPV6
-
-#
-# And execute pppd with the pty option, specifying rsh client as the
-# slave side of the pseduo-tty master/slave pair.
-#
-exec $PPPD_LOC \
-        pty '$RSH_LOC $PPPD_RHOST $PPPD_LOC $REM_IP:$LOC_IP $PPPD_IPV6 file $PPPD_REM_OPT' \
-        $LOC_IP:$REM_IP netmask $NETMASK $PPPD_IPV6 file $PPPD_LOC_OPT
-
diff --git a/mdk-stage1/ppp/scripts/ppp-on-ssh b/mdk-stage1/ppp/scripts/ppp-on-ssh
deleted file mode 100755
index 0e41acac6..000000000
--- a/mdk-stage1/ppp/scripts/ppp-on-ssh
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/bin/sh
-#
-# A sample script to establish PPP session(s) via SSH 1.x
-#
-# Adi Masputra <adi.masputra@sun.com>
-# Jan 24, 2000
-#
-
-#
-# You'd definitely want to change the following addresses to suit
-# your network configuration
-#
-LOC_IP=10.0.0.1
-REM_IP=10.0.0.2
-NETMASK=255.255.0.0
-
-export LOC_IP REM_IP
-
-#
-# This is the remote peer where sshd is running, either
-# its hostname or IP address
-#
-PPPD_RHOST=myremotehost
-
-#
-# For this example, we assume that pppd on both local and remote
-# machines reside in the same place, /usr/local/bin/pppd
-#
-PPPD_LOC=/usr/local/bin/pppd
-
-#
-# The location of local options file (where ssh client is running).
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example, although
-# some may choose to have it there and rely on ssh authentication
-# instead.
-#
-PPPD_LOC_OPT=/etc/ppp/options-ssh-loc
-
-#
-# The location of remote options file (where sshd daemon is running)
-# Note that the sample options file included in the distribution
-# may need further customizations, depending on your needs. The 'noauth'
-# option specified in the file is there to simplify the example, although
-# some may choose to have it there and rely on ssh authentication
-# instead. Also note that the remote options file need to include the 'notty'
-# options for this to work.
-#
-PPPD_REM_OPT=/etc/ppp/options-ssh-rem
-
-#
-# The location of ssh client on the local machine
-#
-SSH_LOC=/usr/local/bin/ssh
-
-export PPPD_LOC PPPD_LOC_OPT PPPD_REM_OPT PPPD_RHOST SSH_LOC
-
-#
-# Uncomment the following to enable IPv6, note that the IPv6 support 
-# needs to be enabled during compilation
-#
-# PPPD_IPV6='+ipv6 ipv6cp-use-ipaddr'
-export PPPD_IPV6
-
-#
-# And execute pppd with the pty option, specifying ssh client as the
-# slave side of the pseudo-tty master/slave pair. Note that on this example,
-# ssh has been compiled to allow NULL encryption (thus the '-c none' option),
-# but in reality, you'd probably want to specify the encryption algorithm.
-# See the man page of ssh(1) for details.
-#
-exec $PPPD_LOC \
-        pty '$SSH_LOC -c none $PPPD_RHOST $PPPD_LOC $REM_IP:$LOC_IP $PPPD_IPV6 file $PPPD_REM_OPT' \
-        $LOC_IP:$REM_IP netmask $NETMASK $PPPD_IPV6 file $PPPD_LOC_OPT
-
diff --git a/mdk-stage1/ppp/scripts/redialer b/mdk-stage1/ppp/scripts/redialer
deleted file mode 100755
index 5bbde4e9d..000000000
--- a/mdk-stage1/ppp/scripts/redialer
+++ /dev/null
@@ -1,96 +0,0 @@
-#!/bin/sh
-###################################################################
-#
-# These parameters control the attack dialing sequence.
-#
-# Maximum number of attempts to reach the telephone number(s)
-MAX_ATTEMPTS=10
-
-# Delay between each of the attempts. This is a parameter to sleep
-# so use "15s" for 15 seconds, "1m" for 1 minute, etc.
-SLEEP_DELAY=15s
-
-###################################################################
-#
-# This is a list of telephone numbers. Add new numbers if you wish
-# and see the function 'callall' below for the dial process.
-PHONE1=555-1212
-PHONE2=411
-
-###################################################################
-#
-# If you use the ppp-on script, then these are passed to this routine
-# automatically. There is no need to define them here. If not, then
-# you will need to set the values.
-#
-ACCOUNT=my_account_name
-PASSWORD=my_password
-
-###################################################################
-#
-# Function to initialize the modem and ensure that it is in command
-# state. This may not be needed, but it doesn't hurt.
-#
-function initialize
-{
-    chat -v TIMEOUT 3 '' AT 'OK-+++\c-OK'
-    return
-}
-
-###################################################################
-#
-# Script to dial a telephone
-#
-function callnumber
-{
-chat -v							\
-	ABORT		'\nBUSY\r'			\
-	ABORT		'\nNO ANSWER\r'			\
-	ABORT		'\nRINGING\r\n\r\nRINGING\r'	\
-	''		ATDT$1				\
-	CONNECT		''				\
-	ogin:--ogin:	$ACCOUNT			\
-	assword:	$PASSWORD
-#
-# If the connection was successful then end the whole script with a
-# success.
-#
-    if [ "$?" = "0" ]; then
-       exit 0
-    fi
-
-    return
-}
-
-###################################################################
-#
-# Script to dial any telephone number
-#
-function callall
-{
-#   echo "dialing attempt number: $1" >/dev/console
-    callnumber $PHONE1
-#    callnumber $PHONE2
-}
-
-###################################################################
-#
-# Initialize the modem to ensure that it is in the command state
-#
-initialize
-if [ ! "$?" = "0" ]; then
-   exit 1
-fi
-
-#
-# Dial telephone numbers until one answers
-#
-attempt=0
-while : ; do
-    attempt=`expr $attempt + 1`
-    callall $attempt
-    if [ "$attempt" = "$MAX_ATTEMPTS" ]; then
-	exit 1
-    fi	
-    sleep "$SLEEP_DELAY"
-done
diff --git a/mdk-stage1/ppp/scripts/secure-card b/mdk-stage1/ppp/scripts/secure-card
deleted file mode 100644
index a32138b7d..000000000
--- a/mdk-stage1/ppp/scripts/secure-card
+++ /dev/null
@@ -1,111 +0,0 @@
-#!/usr/local/bin/expect -f
-#
-# This  script was  written  by  Jim Isaacson  <jcisaac@crl.com>.  It is
-# designed to work  as a script to use the  SecureCARD(tm) device.  This
-# little device is mated with a central controller. The number displayed
-# on this card changes every so often and  you need to enter  the number
-# along with your user account name in order to gain access.  Since chat
-# is based upon fixed strings this procedure will not work with chat.
-#
-# It is included by permission. An excellent reference for the expect
-# program used by this script is in the book:
-#
-# "Exploring Expect"
-# by Don Libes
-# Published by O'Rielly and Associates
-#
-
-send_user "hello, starting ppp\n"
-
-system "stty 19200 -echoe -echo raw < /dev/cua3 > /dev/cua3"
-
-#
-# These are the parameters for the program.
-#
-set user      Pxxxxxx
-set password  xxxxxxx 
-set modem     /dev/cua3
-set dialup    <put phone number here>
-set timeout   60
-
-spawn -noecho -open [open $modem "r+"]
-
-send "AT&F\r"
-expect "OK"
-
-send "ATe0v1x4&c1q0&d2&c1s2=128s0=0DT $dialup\r"
-set timeout 15
-set counter 0
-
-set still_connecting 1
-
-expect {
-	-re ".*CONNECT.*\n" {
-		set timeout 5
-		set still_connecting 0
-		continue -expect
-	}
-	-re ".*CONNECT.*\r" {
-		set timeout 5
-		set still_connecting 0
-		continue -expect
-	}
-        -re ".*NO.*CARRIER" {
-		send_user "Failed to Connect, exiting...\n"
-		exit
-        }
-        -re ".*NO.*DIAL.*TONE" {
-		send_user "Failed to Connect, exiting...\n"
-		exit
-        }
-        -re ".*VOICE" {
-		send_user "Failed to Connect, exiting...\n"
-		exit
-        }
-	-re ".*sscode:.*\n" {
-		continue -expect
-	}
-	-re ".*sscode:" {
-                set timeout -1
-		expect_user -re "(.*)\n"
-		send "$expect_out(1,string)\r"
-		set timeout 30
-		continue -expect
-	}
-	-re ".*Next.*:" {
-                set timeout -1
-		expect_user -re "(.*)\n"
-		send "$expect_out(1,string)\r"
-		set timeout 30
-		continue -expect
-	}
-	-re "Your.*" {
-		send "\r"
-		continue -expect
-	}
-	-re ".*in:" {
-		send "$user\r"
-		continue -expect
-	}
-	-re ".*word:" {
-		send "$password\r"
-	}
-
-	timeout {
-		if { $still_connecting > 0 } {
-			continue -expect 
-			}
-		set timeout 15
-		send "\r"
-		incr counter
-		if { $counter > 8 } {
-			send_user "Cannot Connect\n"
-			exit
-		} else {
-			continue -expect
-		}
-	}
-}
-
-overlay -0 $spawn_id -1 $spawn_id pppd /dev/cua3 19200 192.111.187.215: \
-	crtscts modem defaultroute debug 
diff --git a/mdk-stage1/ppp/solaris/Makedefs b/mdk-stage1/ppp/solaris/Makedefs
deleted file mode 100644
index 81db8ab2e..000000000
--- a/mdk-stage1/ppp/solaris/Makedefs
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= /usr/sbin/install
-
-BINDIR = /usr/local/bin
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-COPTS = -O -Xa
-
-# For compiling with gcc, comment out the COPTS definition above and
-# uncomment the next 2 definitions.
-#CC = gcc
-#COPTS = -O2
diff --git a/mdk-stage1/ppp/solaris/Makedefs.sol2 b/mdk-stage1/ppp/solaris/Makedefs.sol2
deleted file mode 100644
index 1282c6e74..000000000
--- a/mdk-stage1/ppp/solaris/Makedefs.sol2
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# Generic make definitions for Solaris 2
-#
-# $Id$
-#
-
-include ../solaris/Makedefs
-
-CPPFLAGS	= -D_KERNEL -DSVR4 -DSOL2 -DPRIOQ -DDEBUG -I../include
-CFLAGS		= $(CPPFLAGS) $(COPTS)
-
-# lint-specific variables
-LINT            = lint
-LINT_OPT_32     =
-LINT_OPT_64     = -Xarch=v9 -errchk=longptr64
-
-LINT_32     	=
-LINT_32     	+= -erroff=E_BAD_PTR_CAST_ALIGN
-LINT_32     	+= -erroff=E_SUPPRESSION_DIRECTIVE_UNUSED
-LINT_32     	+= -erroff=E_SUSPICIOUS_COMPARISON
-LINT_32     	+= -erroff=E_CAST_UINT_TO_SIGNED_INT
-LINT_32     	+= -erroff=E_PASS_UINT_TO_SIGNED_INT
-LINT_32     	+= -erroff=E_INVALID_ANNOTATION_NAME
-LINT_32     	+= -erroff=E_FUNC_ARG_UNUSED
-# This might be needed, but zlib.c and vjcompress.c will squawk 
-# when not ignored
-LINT_32		+= -erroff=E_CASE_FALLTHRU
-LINT_32		+= -erroff=E_RET_INT_IMPLICITLY
-LINT_32		+= -erroff=E_FUNC_NO_RET_VAL
-# Some STREAMS macros will be noisy too when this isn't ignored
-LINT_32		+= -erroff=E_CONSTANT_CONDITION
-LINT_32		+= -erroff=E_CONST_EXPR
-
-# Extra noise suppressant for 64-bit
-EXTRA_OFF 	=
-EXTRA_OFF 	+= -erroff=E_CAST_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_CAST_INT_CONST_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_CAST_TO_PTR_FROM_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_INT_FROM_BIG_CONST
-EXTRA_OFF 	+= -erroff=E_CONST_PROMOTED_UNSIGNED_LL
-EXTRA_OFF 	+= -erroff=E_CONST_PROMOTED_LONG_LONG
-EXTRA_OFF 	+= -erroff=E_CONST_TRUNCATED_BY_ASSIGN
-EXTRA_OFF 	+= -erroff=E_PASS_INT_FROM_BIG_CONST
-EXTRA_OFF 	+= -erroff=E_COMP_INT_WITH_LARGE_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_UINT_TO_SIGNED_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_NARROW_CONV
-EXTRA_OFF 	+= -erroff=E_PASS_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_PTR_CONV_LOSES_BITS
-
-LINT_64     	= $(LINT_32)
-LINT_64     	+= $(EXTRA_OFF)
-
-LINTFLAGS64     = -Xa -nsxmuF -errtags=yes $(LINT_OPT_64) $(LINT_64)
-LINT64          = $(LINT) -c $(LINTFLAGS64) $(CPPFLAGS)
-
-LINTFLAGS32     = -Xa -nsxmuF -errtags=yes $(LINT_OPT_32) $(LINT_32)
-LINT32          = $(LINT) -c $(LINTFLAGS32) $(CPPFLAGS)
-
diff --git a/mdk-stage1/ppp/solaris/Makefile.sol2 b/mdk-stage1/ppp/solaris/Makefile.sol2
deleted file mode 100644
index 78628847b..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.sol2
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Makefile for STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-COPTS += -xO2 -xspace -W0,-Lt
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
-	ppp_comp_mod.o
-
-all:	ppp ppp_ahdl ppp_comp
-
-ppp:	ppp.o ppp_mod.o
-	ld -r -o $@ ppp.o ppp_mod.o
-	chmod +x $@
-
-ppp_ahdl: ppp_ahdlc.o ppp_ahdlc_mod.o
-	ld -r -o $@ ppp_ahdlc.o ppp_ahdlc_mod.o
-	chmod +x $@
-
-ppp_comp: $(COMP_OBJS)
-	ld -r -o $@ $(COMP_OBJS)
-	chmod +x $@
-
-bsd-comp.o:	../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $?
-deflate.o:	../modules/deflate.c
-	$(CC) $(CFLAGS) -c $?
-ppp.o:	ppp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_mod.o:	ppp_mod.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp.o: ppp_comp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp_mod.o:	ppp_comp_mod.c
-	$(CC) $(CFLAGS) -c $?
-vjcompress.o:	../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $?
-zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $?
-
-install:
-	cp ppp ppp.conf /kernel/drv
-	cp ppp_comp ppp_ahdl /kernel/strmod
-	if grep clone:ppp /etc/minor_perm; then :; else \
-	  echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-	/usr/sbin/rem_drv ppp 2>/dev/null || true
-	/usr/sbin/add_drv ppp
-
-SRCS	= ppp.c ppp_mod.c ppp_ahdlc.c ppp_ahdlc_mod.c \
-	ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-	../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
-	$(LINT32) $(SRCS)
-
-clean:
-	rm -f ppp ppp_comp ppp_ahdl *.o *~ core
-	rm -f *.ln
diff --git a/mdk-stage1/ppp/solaris/Makefile.sol2-64 b/mdk-stage1/ppp/solaris/Makefile.sol2-64
deleted file mode 100644
index 63e75fc54..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.sol2-64
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile for 64-bit STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-# Sun's cc flag for LP64 compilation / linkage
-COPTS 		+= -xchip=ultra -xarch=v9 -Wc,-xcode=abs32 -Wc,-Qiselect-regsym=0 -xO3 -xspace -W0,-Lt
-
-# subdirectory where 64-bit objects / binaries will be placed
-LP64DIR		= sparcv9
-
-# Name of legacy Makefile (for 32-bit binaries)
-STD_MAKE	= Makefile.sol2
-
-COMP_OBJS	= $(LP64DIR)/ppp_comp.o $(LP64DIR)/bsd-comp.o \
-		$(LP64DIR)/deflate.o $(LP64DIR)/zlib.o $(LP64DIR)/vjcompress.o \
-		$(LP64DIR)/ppp_comp_mod.o
-
-all:	std_objs $(LP64DIR) ppp ppp_ahdl ppp_comp
-
-std_objs:
-	$(MAKE) -f $(STD_MAKE) all
-
-ppp:	$(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-	ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-	chmod +x $(LP64DIR)/$@
-
-ppp_ahdl: $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-	ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-	chmod +x $(LP64DIR)/$@
-
-ppp_comp: $(COMP_OBJS)
-	ld -r -o $(LP64DIR)/$@ $(COMP_OBJS)
-	chmod +x $(LP64DIR)/$@
-
-$(LP64DIR)/bsd-comp.o: ../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/deflate.o: ../modules/deflate.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp.o:	ppp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_mod.o:	ppp_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc.o: ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp.o: ppp_comp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp_mod.o: ppp_comp_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/vjcompress.o: ../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $? -o $@
-
-$(LP64DIR):
-	mkdir -m 755 -p $@
-
-install:
-	cp ppp ppp.conf /kernel/drv
-	cp ppp_comp ppp_ahdl /kernel/strmod
-	cp $(LP64DIR)/ppp /kernel/drv/$(LP64DIR)
-	cp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl /kernel/strmod/$(LP64DIR)
-	if grep clone:ppp /etc/minor_perm; then :; else \
-	  echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-	/usr/sbin/rem_drv ppp 2>/dev/null || true
-	/usr/sbin/add_drv ppp
-
-SRCS	= ppp.c ppp_mod.c ppp_ahdlc.c ppp_ahdlc_mod.c \
-	ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-	../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
-	$(LINT64) $(SRCS)
-
-lint-32:
-	$(LINT32) $(SRCS)
-
-clean:
-	$(MAKE) -f $(STD_MAKE) clean
-	rm -f $(LP64DIR)/ppp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl $(LP64DIR)/*.o $(LP64DIR)/*~ $(LP64DIR)/core
diff --git a/mdk-stage1/ppp/solaris/Makefile.top b/mdk-stage1/ppp/solaris/Makefile.top
deleted file mode 100644
index f1200b852..000000000
--- a/mdk-stage1/ppp/solaris/Makefile.top
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# ppp top level makefile for SVR4 and Solaris 2
-#
-# $Id$
-#
-
-include solaris/Makedefs
-
-all:
-	cd chat; $(MAKE) all
-	cd pppd; $(MAKE) all
-	cd pppstats; $(MAKE) all
-	cd pppdump; $(MAKE) all
-	cd solaris; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
-	cd chat; $(MAKE) install
-	cd pppd; $(MAKE) install
-	cd pppstats; $(MAKE) install
-	cd pppdump; $(MAKE) install
-	cd solaris; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-	$(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
-	cp etc.ppp/options $@
-	chmod go-w $@
-$(ETCDIR)/pap-secrets:
-	$(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/pap-secrets
-$(ETCDIR)/chap-secrets:
-	$(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/chap-secrets
-
-$(BINDIR):
-	mkdir -m 755 -p $@
-$(MANDIR)/man8:
-	mkdir -m 755 -p $@
-$(ETCDIR):
-	mkdir -m 755 -p $@
-
-clean:
-	rm -f *~
-	cd chat; $(MAKE) clean
-	cd pppd; $(MAKE) clean
-	cd pppstats; $(MAKE) clean
-	cd pppdump; $(MAKE) clean
-	cd solaris; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/solaris/ppp.c b/mdk-stage1/ppp/solaris/ppp.c
deleted file mode 100644
index 44bf08dff..000000000
--- a/mdk-stage1/ppp/solaris/ppp.c
+++ /dev/null
@@ -1,2486 +0,0 @@
-/*
- * ppp.c - STREAMS multiplexing pseudo-device driver for PPP.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/errno.h>
-#ifdef __osf__
-#include <sys/ioctl.h>
-#include <sys/cmn_err.h>
-#define queclass(mp)	((mp)->b_band & QPCTL)
-#else
-#include <sys/ioccom.h>
-#endif
-#include <sys/time.h>
-#ifdef SVR4
-#include <sys/cmn_err.h>
-#include <sys/conf.h>
-#include <sys/dlpi.h>
-#include <sys/ddi.h>
-#ifdef SOL2
-#include <sys/ksynch.h>
-#include <sys/kstat.h>
-#include <sys/sunddi.h>
-#include <sys/ethernet.h>
-#else
-#include <sys/socket.h>
-#include <sys/sockio.h>
-#include <net/if.h>
-#include <netinet/in.h>
-#endif /* SOL2 */
-#else /* not SVR4 */
-#include <sys/user.h>
-#endif /* SVR4 */
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Modifications marked with #ifdef PRIOQ are for priority queueing of
- * interactive traffic, and are due to Marko Zec <zec@japa.tel.fer.hr>.
- */
-#ifdef PRIOQ
-#endif	/* PRIOQ */
-
-#include <netinet/in.h>	/* leave this outside of PRIOQ for htons */
-
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-
-/*
- * The IP module may use this SAP value for IP packets.
- */
-#ifndef ETHERTYPE_IP
-#define ETHERTYPE_IP	0x800
-#endif
-
-#if !defined(ETHERTYPE_IPV6) 
-#define ETHERTYPE_IPV6	0x86dd
-#endif /* !defined(ETHERTYPE_IPV6) */
-
-#if !defined(ETHERTYPE_ALLSAP) && defined(SOL2)
-#define ETHERTYPE_ALLSAP   0
-#endif /* !defined(ETHERTYPE_ALLSAP) && defined(SOL2) */
-
-#if !defined(PPP_ALLSAP) && defined(SOL2)
-#define PPP_ALLSAP  PPP_ALLSTATIONS
-#endif /* !defined(PPP_ALLSAP) && defined(SOL2) */
-
-extern time_t time;
-
-#ifdef SOL2
-/*
- * We use this reader-writer lock to ensure that the lower streams
- * stay connected to the upper streams while the lower-side put and
- * service procedures are running.  Essentially it is an existence
- * lock for the upper stream associated with each lower stream.
- */
-krwlock_t ppp_lower_lock;
-#define LOCK_LOWER_W	rw_enter(&ppp_lower_lock, RW_WRITER)
-#define LOCK_LOWER_R	rw_enter(&ppp_lower_lock, RW_READER)
-#define TRYLOCK_LOWER_R	rw_tryenter(&ppp_lower_lock, RW_READER)
-#define UNLOCK_LOWER	rw_exit(&ppp_lower_lock)
-
-#define MT_ENTER(x)	mutex_enter(x)
-#define MT_EXIT(x)	mutex_exit(x)
-
-/*
- * Notes on multithreaded implementation for Solaris 2:
- *
- * We use an inner perimeter around each queue pair and an outer
- * perimeter around the whole driver.  The inner perimeter is
- * entered exclusively for all entry points (open, close, put,
- * service).  The outer perimeter is entered exclusively for open
- * and close and shared for put and service.  This is all done for
- * us by the streams framework.
- *
- * I used to think that the perimeters were entered for the lower
- * streams' put and service routines as well as for the upper streams'.
- * Because of problems experienced by people, and after reading the
- * documentation more closely, I now don't think that is true.  So we
- * now use ppp_lower_lock to give us an existence guarantee on the
- * upper stream controlling each lower stream.
- *
- * Shared entry to the outer perimeter protects the existence of all
- * the upper streams and their upperstr_t structures, and guarantees
- * that the following fields of any upperstr_t won't change:
- * nextmn, next, nextppa.  It guarantees that the lowerq field of an
- * upperstr_t won't go from non-zero to zero, that the global `ppas'
- * won't change and that the no lower stream will get unlinked.
- *
- * Shared (reader) access to ppa_lower_lock guarantees that no lower
- * stream will be unlinked and that the lowerq field of all upperstr_t
- * structures won't change.
- */
-
-#else /* SOL2 */
-#define LOCK_LOWER_W	0
-#define LOCK_LOWER_R	0
-#define TRYLOCK_LOWER_R	1
-#define UNLOCK_LOWER	0
-#define MT_ENTER(x)	0
-#define MT_EXIT(x)	0
-
-#endif /* SOL2 */
-
-/*
- * Private information; one per upper stream.
- */
-typedef struct upperstr {
-    minor_t mn;			/* minor device number */
-    struct upperstr *nextmn;	/* next minor device */
-    queue_t *q;			/* read q associated with this upper stream */
-    int flags;			/* flag bits, see below */
-    int state;			/* current DLPI state */
-    int sap;			/* service access point */
-    int req_sap;		/* which SAP the DLPI client requested */
-    struct upperstr *ppa;	/* control stream for our ppa */
-    struct upperstr *next;	/* next stream for this ppa */
-    uint ioc_id;		/* last ioctl ID for this stream */
-    enum NPmode npmode;		/* what to do with packets on this SAP */
-    unsigned char rblocked;	/* flow control has blocked upper read strm */
-	/* N.B. rblocked is only changed by control stream's put/srv procs */
-    /*
-     * There is exactly one control stream for each PPA.
-     * The following fields are only used for control streams.
-     */
-    int ppa_id;
-    queue_t *lowerq;		/* write queue attached below this PPA */
-    struct upperstr *nextppa;	/* next control stream */
-    int mru;
-    int mtu;
-    struct pppstat stats;	/* statistics */
-    time_t last_sent;		/* time last NP packet sent */
-    time_t last_recv;		/* time last NP packet rcvd */
-#ifdef SOL2
-    kmutex_t stats_lock;	/* lock for stats updates */
-    kstat_t *kstats;		/* stats for netstat */
-#endif /* SOL2 */
-#ifdef LACHTCP
-    int ifflags;
-    char ifname[IFNAMSIZ];
-    struct ifstats ifstats;
-#endif /* LACHTCP */
-} upperstr_t;
-
-/* Values for flags */
-#define US_PRIV		1	/* stream was opened by superuser */
-#define US_CONTROL	2	/* stream is a control stream */
-#define US_BLOCKED	4	/* flow ctrl has blocked lower write stream */
-#define US_LASTMOD	8	/* no PPP modules below us */
-#define US_DBGLOG	0x10	/* log various occurrences */
-#define US_RBLOCKED	0x20	/* flow ctrl has blocked upper read stream */
-
-#if defined(SOL2)
-#if DL_CURRENT_VERSION >= 2
-#define US_PROMISC	0x40	/* stream is promiscuous */
-#endif /* DL_CURRENT_VERSION >= 2 */
-#define US_RAWDATA	0x80	/* raw M_DATA, no DLPI header */
-#endif /* defined(SOL2) */
-
-#ifdef PRIOQ
-static u_char max_band=0;
-static u_char def_band=0;
-
-#define IPPORT_DEFAULT		65535
-
-/*
- * Port priority table
- * Highest priority ports are listed first, lowest are listed last.
- * ICMP & packets using unlisted ports will be treated as "default".
- * If IPPORT_DEFAULT is not listed here, "default" packets will be 
- * assigned lowest priority.
- * Each line should be terminated with "0".
- * Line containing only "0" marks the end of the list.
- */
-
-static u_short prioq_table[]= {
-    113, 53, 0,
-    22, 23, 513, 517, 518, 0,
-    514, 21, 79, 111, 0,
-    25, 109, 110, 0,
-    IPPORT_DEFAULT, 0,
-    20, 70, 80, 8001, 8008, 8080, 0, /* 8001,8008,8080 - common proxy ports */
-0 };
-
-#endif	/* PRIOQ */
-
-
-static upperstr_t *minor_devs = NULL;
-static upperstr_t *ppas = NULL;
-
-#ifdef SVR4
-static int pppopen __P((queue_t *, dev_t *, int, int, cred_t *));
-static int pppclose __P((queue_t *, int, cred_t *));
-#else
-static int pppopen __P((queue_t *, int, int, int));
-static int pppclose __P((queue_t *, int));
-#endif /* SVR4 */
-static int pppurput __P((queue_t *, mblk_t *));
-static int pppuwput __P((queue_t *, mblk_t *));
-static int pppursrv __P((queue_t *));
-static int pppuwsrv __P((queue_t *));
-static int ppplrput __P((queue_t *, mblk_t *));
-static int ppplwput __P((queue_t *, mblk_t *));
-static int ppplrsrv __P((queue_t *));
-static int ppplwsrv __P((queue_t *));
-#ifndef NO_DLPI
-static void dlpi_request __P((queue_t *, mblk_t *, upperstr_t *));
-static void dlpi_error __P((queue_t *, upperstr_t *, int, int, int));
-static void dlpi_ok __P((queue_t *, int));
-#endif
-static int send_data __P((mblk_t *, upperstr_t *));
-static void new_ppa __P((queue_t *, mblk_t *));
-static void attach_ppa __P((queue_t *, mblk_t *));
-static void detach_ppa __P((queue_t *, mblk_t *));
-static void detach_lower __P((queue_t *, mblk_t *));
-static void debug_dump __P((queue_t *, mblk_t *));
-static upperstr_t *find_dest __P((upperstr_t *, int));
-#if defined(SOL2)
-static upperstr_t *find_promisc __P((upperstr_t *, int));
-static mblk_t *prepend_ether __P((upperstr_t *, mblk_t *, int));
-static mblk_t *prepend_udind __P((upperstr_t *, mblk_t *, int));
-static void promisc_sendup __P((upperstr_t *, mblk_t *, int, int));
-#endif /* defined(SOL2) */
-static int putctl2 __P((queue_t *, int, int, int));
-static int putctl4 __P((queue_t *, int, int, int));
-static int pass_packet __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#ifdef FILTER_PACKETS
-static int ip_hard_filter __P((upperstr_t *ppa, mblk_t *mp, int outbound));
-#endif /* FILTER_PACKETS */
-
-#define PPP_ID 0xb1a6
-static struct module_info ppp_info = {
-#ifdef PRIOQ
-    PPP_ID, "ppp", 0, 512, 512, 384
-#else
-    PPP_ID, "ppp", 0, 512, 512, 128
-#endif	/* PRIOQ */
-};
-
-static struct qinit pppurint = {
-    pppurput, pppursrv, pppopen, pppclose, NULL, &ppp_info, NULL
-};
-
-static struct qinit pppuwint = {
-    pppuwput, pppuwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplrint = {
-    ppplrput, ppplrsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-static struct qinit ppplwint = {
-    ppplwput, ppplwsrv, NULL, NULL, NULL, &ppp_info, NULL
-};
-
-#ifdef LACHTCP
-extern struct ifstats *ifstats;
-int pppdevflag = 0;
-#endif
-
-struct streamtab pppinfo = {
-    &pppurint, &pppuwint,
-    &ppplrint, &ppplwint
-};
-
-int ppp_count;
-
-/*
- * How we maintain statistics.
- */
-#ifdef SOL2
-#define INCR_IPACKETS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[0].value.ul++;	\
-	}
-#define INCR_IERRORS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[1].value.ul++;	\
-	}
-#define INCR_OPACKETS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[2].value.ul++;	\
-	}
-#define INCR_OERRORS(ppa)				\
-	if (ppa->kstats != 0) {				\
-	    KSTAT_NAMED_PTR(ppa->kstats)[3].value.ul++;	\
-	}
-#endif
-
-#ifdef LACHTCP
-#define INCR_IPACKETS(ppa)	ppa->ifstats.ifs_ipackets++;
-#define INCR_IERRORS(ppa)	ppa->ifstats.ifs_ierrors++;
-#define INCR_OPACKETS(ppa)	ppa->ifstats.ifs_opackets++;
-#define INCR_OERRORS(ppa)	ppa->ifstats.ifs_oerrors++;
-#endif
-
-/*
- * STREAMS driver entry points.
- */
-static int
-#ifdef SVR4
-pppopen(q, devp, oflag, sflag, credp)
-    queue_t *q;
-    dev_t *devp;
-    int oflag, sflag;
-    cred_t *credp;
-#else
-pppopen(q, dev, oflag, sflag)
-    queue_t *q;
-    int dev;			/* really dev_t */
-    int oflag, sflag;
-#endif
-{
-    upperstr_t *up;
-    upperstr_t **prevp;
-    minor_t mn;
-#ifdef PRIOQ
-    u_short *ptr;
-    u_char new_band;
-#endif	/* PRIOQ */
-
-    if (q->q_ptr)
-	DRV_OPEN_OK(dev);	/* device is already open */
-
-#ifdef PRIOQ
-    /* Calculate max_bband & def_band from definitions in prioq.h
-       This colud be done at some more approtiate time (less often)
-       but this way it works well so I'll just leave it here */
-
-    max_band = 1;
-    def_band = 0;
-    ptr = prioq_table;
-    while (*ptr) {
-        new_band = 1;
-        while (*ptr)
-	    if (*ptr++ == IPPORT_DEFAULT) {
-		new_band = 0;
-		def_band = max_band;
-	    }
-        max_band += new_band;
-        ptr++;
-    }
-    if (def_band)
-        def_band = max_band - def_band;
-    --max_band;
-#endif	/* PRIOQ */
-
-    if (sflag == CLONEOPEN) {
-	mn = 0;
-	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
-	    if (up->mn != mn)
-		break;
-	    ++mn;
-	}
-    } else {
-#ifdef SVR4
-	mn = getminor(*devp);
-#else
-	mn = minor(dev);
-#endif
-	for (prevp = &minor_devs; (up = *prevp) != 0; prevp = &up->nextmn) {
-	    if (up->mn >= mn)
-		break;
-	}
-	if (up->mn == mn) {
-	    /* this can't happen */
-	    q->q_ptr = WR(q)->q_ptr = (caddr_t) up;
-	    DRV_OPEN_OK(dev);
-	}
-    }
-
-    /*
-     * Construct a new minor node.
-     */
-    up = (upperstr_t *) ALLOC_SLEEP(sizeof(upperstr_t));
-    bzero((caddr_t) up, sizeof(upperstr_t));
-    if (up == 0) {
-	DPRINT("pppopen: out of kernel memory\n");
-	OPEN_ERROR(ENXIO);
-    }
-    up->nextmn = *prevp;
-    *prevp = up;
-    up->mn = mn;
-#ifdef SVR4
-    *devp = makedevice(getmajor(*devp), mn);
-#endif
-    up->q = q;
-    if (NOTSUSER() == 0)
-	up->flags |= US_PRIV;
-#ifndef NO_DLPI
-    up->state = DL_UNATTACHED;
-#endif
-#ifdef LACHTCP
-    up->ifflags = IFF_UP | IFF_POINTOPOINT;
-#endif
-    up->sap = -1;
-    up->last_sent = up->last_recv = time;
-    up->npmode = NPMODE_DROP;
-    q->q_ptr = (caddr_t) up;
-    WR(q)->q_ptr = (caddr_t) up;
-    noenable(WR(q));
-#ifdef SOL2
-    mutex_init(&up->stats_lock, NULL, MUTEX_DRIVER, NULL);
-#endif
-    ++ppp_count;
-
-    qprocson(q);
-    DRV_OPEN_OK(makedev(major(dev), mn));
-}
-
-static int
-#ifdef SVR4
-pppclose(q, flag, credp)
-    queue_t *q;
-    int flag;
-    cred_t *credp;
-#else
-pppclose(q, flag)
-    queue_t *q;
-    int flag;
-#endif
-{
-    upperstr_t *up, **upp;
-    upperstr_t *as, *asnext;
-    upperstr_t **prevp;
-
-    qprocsoff(q);
-
-    up = (upperstr_t *) q->q_ptr;
-    if (up == 0) {
-	DPRINT("pppclose: q_ptr = 0\n");
-	return 0;
-    }
-    if (up->flags & US_DBGLOG)
-	DPRINT2("ppp/%d: close, flags=%x\n", up->mn, up->flags);
-    if (up->flags & US_CONTROL) {
-#ifdef LACHTCP
-	struct ifstats *ifp, *pifp;
-#endif
-	if (up->lowerq != 0) {
-	    /* Gack! the lower stream should have be unlinked earlier! */
-	    DPRINT1("ppp%d: lower stream still connected on close?\n",
-		    up->mn);
-	    LOCK_LOWER_W;
-	    up->lowerq->q_ptr = 0;
-	    RD(up->lowerq)->q_ptr = 0;
-	    up->lowerq = 0;
-	    UNLOCK_LOWER;
-	}
-
-	/*
-	 * This stream represents a PPA:
-	 * For all streams attached to the PPA, clear their
-	 * references to this PPA.
-	 * Then remove this PPA from the list of PPAs.
-	 */
-	for (as = up->next; as != 0; as = asnext) {
-	    asnext = as->next;
-	    as->next = 0;
-	    as->ppa = 0;
-	    if (as->flags & US_BLOCKED) {
-		as->flags &= ~US_BLOCKED;
-		flushq(WR(as->q), FLUSHDATA);
-	    }
-	}
-	for (upp = &ppas; *upp != 0; upp = &(*upp)->nextppa)
-	    if (*upp == up) {
-		*upp = up->nextppa;
-		break;
-	    }
-#ifdef LACHTCP
-	/* Remove the statistics from the active list.  */
-	for (ifp = ifstats, pifp = 0; ifp; ifp = ifp->ifs_next) {
-	    if (ifp == &up->ifstats) {
-		if (pifp)
-		    pifp->ifs_next = ifp->ifs_next;
-		else
-		    ifstats = ifp->ifs_next;
-		break;
-	    }
-	    pifp = ifp;
-	}
-#endif
-    } else {
-	/*
-	 * If this stream is attached to a PPA,
-	 * remove it from the PPA's list.
-	 */
-	if ((as = up->ppa) != 0) {
-	    for (; as->next != 0; as = as->next)
-		if (as->next == up) {
-		    as->next = up->next;
-		    break;
-		}
-	}
-    }
-
-#ifdef SOL2
-    if (up->kstats)
-	kstat_delete(up->kstats);
-    mutex_destroy(&up->stats_lock);
-#endif
-
-    q->q_ptr = NULL;
-    WR(q)->q_ptr = NULL;
-
-    for (prevp = &minor_devs; *prevp != 0; prevp = &(*prevp)->nextmn) {
-	if (*prevp == up) {
-	    *prevp = up->nextmn;
-	    break;
-	}
-    }
-    FREE(up, sizeof(upperstr_t));
-    --ppp_count;
-
-    return 0;
-}
-
-/*
- * A message from on high.  We do one of three things:
- *	- qreply()
- *	- put the message on the lower write stream
- *	- queue it for our service routine
- */
-static int
-pppuwput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *ppa, *nps;
-    struct iocblk *iop;
-    struct linkblk *lb;
-#ifdef LACHTCP
-    struct ifreq *ifr;
-    int i;
-#endif
-    queue_t *lq;
-    int error, n, sap;
-    mblk_t *mq;
-    struct ppp_idle *pip;
-#ifdef PRIOQ
-    queue_t *tlq;
-#endif	/* PRIOQ */
-#ifdef NO_DLPI
-    upperstr_t *os;
-#endif
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppuwput: q_ptr = 0!\n");
-	return 0;
-    }
-    if (mp == 0) {
-	DPRINT1("pppuwput/%d: mp = 0!\n", us->mn);
-	return 0;
-    }
-    if (mp->b_datap == 0) {
-	DPRINT1("pppuwput/%d: mp->b_datap = 0!\n", us->mn);
-	return 0;
-    }
-    switch (mp->b_datap->db_type) {
-#ifndef NO_DLPI
-    case M_PCPROTO:
-    case M_PROTO:
-	dlpi_request(q, mp, us);
-	break;
-#endif /* NO_DLPI */
-
-    case M_DATA:
-	if (us->flags & US_DBGLOG)
-	    DPRINT3("ppp/%d: uwput M_DATA len=%d flags=%x\n",
-		    us->mn, msgdsize(mp), us->flags);
-	if (us->ppa == 0 || msgdsize(mp) > us->ppa->mtu + PPP_HDRLEN
-#ifndef NO_DLPI
-	    || (us->flags & US_CONTROL) == 0
-#endif /* NO_DLPI */
-	    ) {
-	    DPRINT1("pppuwput: junk data len=%d\n", msgdsize(mp));
-	    freemsg(mp);
-	    break;
-	}
-#ifdef NO_DLPI
-	if ((us->flags & US_CONTROL) == 0 && !pass_packet(us, mp, 1))
-	    break;
-#endif
-	if (!send_data(mp, us))
-	    putq(q, mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	if (us->flags & US_DBGLOG)
-	    DPRINT3("ppp/%d: ioctl %x count=%d\n",
-		    us->mn, iop->ioc_cmd, iop->ioc_count);
-	switch (iop->ioc_cmd) {
-#if defined(SOL2)
-	case DLIOCRAW:	    /* raw M_DATA mode */
-	    us->flags |= US_RAWDATA;
-	    error = 0;
-	    break;
-#endif /* defined(SOL2) */
-	case I_LINK:
-	    if ((us->flags & US_CONTROL) == 0 || us->lowerq != 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_LINK b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    lb = (struct linkblk *) mp->b_cont->b_rptr;
-	    lq = lb->l_qbot;
-	    if (lq == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_LINK l_qbot = 0!\n", us->mn);
-		break;
-	    }
-	    LOCK_LOWER_W;
-	    us->lowerq = lq;
-	    lq->q_ptr = (caddr_t) q;
-	    RD(lq)->q_ptr = (caddr_t) us->q;
-	    UNLOCK_LOWER;
-	    iop->ioc_count = 0;
-	    error = 0;
-	    us->flags &= ~US_LASTMOD;
-	    /* Unblock upper streams which now feed this lower stream. */
-	    qenable(q);
-	    /* Send useful information down to the modules which
-	       are now linked below us. */
-	    putctl2(lq, M_CTL, PPPCTL_UNIT, us->ppa_id);
-	    putctl4(lq, M_CTL, PPPCTL_MRU, us->mru);
-	    putctl4(lq, M_CTL, PPPCTL_MTU, us->mtu);
-#ifdef PRIOQ
-            /* Lower tty driver's queue hiwat/lowat from default 4096/128
-               to 256/128 since we don't want queueing of data on
-               output to physical device */
-
-            freezestr(lq);
-            for (tlq = lq; tlq->q_next != NULL; tlq = tlq->q_next)
-		;
-            strqset(tlq, QHIWAT, 0, 256);
-            strqset(tlq, QLOWAT, 0, 128);
-            unfreezestr(lq);
-#endif	/* PRIOQ */
-	    break;
-
-	case I_UNLINK:
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl I_UNLINK b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    lb = (struct linkblk *) mp->b_cont->b_rptr;
-#if DEBUG
-	    if (us->lowerq != lb->l_qbot) {
-		DPRINT2("ppp unlink: lowerq=%x qbot=%x\n",
-			us->lowerq, lb->l_qbot);
-		break;
-	    }
-#endif
-	    iop->ioc_count = 0;
-	    qwriter(q, mp, detach_lower, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-	case PPPIO_NEWPPA:
-	    if (us->flags & US_CONTROL)
-		break;
-	    if ((us->flags & US_PRIV) == 0) {
-		error = EPERM;
-		break;
-	    }
-	    /* Arrange to return an int */
-	    if ((mq = mp->b_cont) == 0
-		|| mq->b_datap->db_lim - mq->b_rptr < sizeof(int)) {
-		mq = allocb(sizeof(int), BPRI_HI);
-		if (mq == 0) {
-		    error = ENOSR;
-		    break;
-		}
-		if (mp->b_cont != 0)
-		    freemsg(mp->b_cont);
-		mp->b_cont = mq;
-		mq->b_cont = 0;
-	    }
-	    iop->ioc_count = sizeof(int);
-	    mq->b_wptr = mq->b_rptr + sizeof(int);
-	    qwriter(q, mp, new_ppa, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-	case PPPIO_ATTACH:
-	    /* like dlpi_attach, for programs which can't write to
-	       the stream (like pppstats) */
-	    if (iop->ioc_count != sizeof(int) || us->ppa != 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_ATTACH b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
-		if (ppa->ppa_id == n)
-		    break;
-	    if (ppa == 0)
-		break;
-	    us->ppa = ppa;
-	    iop->ioc_count = 0;
-	    qwriter(q, mp, attach_ppa, PERIM_OUTER);
-	    error = -1;
-	    break;
-
-#ifdef NO_DLPI
-	case PPPIO_BIND:
-	    /* Attach to a given SAP. */
-	    if (iop->ioc_count != sizeof(int) || us->ppa == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_BIND b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    /* n must be a valid PPP network protocol number. */
-	    if (n < 0x21 || n > 0x3fff || (n & 0x101) != 1)
-		break;
-	    /* check that no other stream is bound to this sap already. */
-	    for (os = us->ppa; os != 0; os = os->next)
-		if (os->sap == n)
-		    break;
-	    if (os != 0)
-		break;
-	    us->sap = n;
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-#endif /* NO_DLPI */
-
-	case PPPIO_MRU:
-	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_MRU b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n <= 0 || n > PPP_MAXMRU)
-		break;
-	    if (n < PPP_MRU)
-		n = PPP_MRU;
-	    us->mru = n;
-	    if (us->lowerq)
-		putctl4(us->lowerq, M_CTL, PPPCTL_MRU, n);
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_MTU:
-	    if (iop->ioc_count != sizeof(int) || (us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_MTU b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n <= 0 || n > PPP_MAXMTU)
-		break;
-	    us->mtu = n;
-#ifdef LACHTCP
-	    /* The MTU reported in netstat, not used as IP max packet size! */
-	    us->ifstats.ifs_mtu = n;
-#endif
-	    if (us->lowerq)
-		putctl4(us->lowerq, M_CTL, PPPCTL_MTU, n);
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_LASTMOD:
-	    us->flags |= US_LASTMOD;
-	    error = 0;
-	    break;
-
-	case PPPIO_DEBUG:
-	    if (iop->ioc_count != sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_DEBUG b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n == PPPDBG_DUMP + PPPDBG_DRIVER) {
-		qwriter(q, NULL, debug_dump, PERIM_OUTER);
-		iop->ioc_count = 0;
-		error = -1;
-	    } else if (n == PPPDBG_LOG + PPPDBG_DRIVER) {
-		DPRINT1("ppp/%d: debug log enabled\n", us->mn);
-		us->flags |= US_DBGLOG;
-		iop->ioc_count = 0;
-		error = 0;
-	    } else {
-		if (us->ppa == 0 || us->ppa->lowerq == 0)
-		    break;
-		putnext(us->ppa->lowerq, mp);
-		error = -1;
-	    }
-	    break;
-
-	case PPPIO_NPMODE:
-	    if (iop->ioc_count != 2 * sizeof(int))
-		break;
-	    if ((us->flags & US_CONTROL) == 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("pppuwput/%d: ioctl PPPIO_NPMODE b_cont = 0!\n", us->mn);
-		break;
-	    }
-	    sap = ((int *)mp->b_cont->b_rptr)[0];
-	    for (nps = us->next; nps != 0; nps = nps->next) {
-		if (us->flags & US_DBGLOG)
-		    DPRINT2("us = 0x%x, us->next->sap = 0x%x\n", nps, nps->sap);
-		if (nps->sap == sap)
-		    break;
-	    }
-	    if (nps == 0) {
-		if (us->flags & US_DBGLOG)
-		    DPRINT2("ppp/%d: no stream for sap %x\n", us->mn, sap);
-		break;
-	    }
-	    /* XXX possibly should use qwriter here */
-	    nps->npmode = (enum NPmode) ((int *)mp->b_cont->b_rptr)[1];
-	    if (nps->npmode != NPMODE_QUEUE && (nps->flags & US_BLOCKED) != 0)
-		qenable(WR(nps->q));
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_GIDLE:
-	    if ((ppa = us->ppa) == 0)
-		break;
-	    mq = allocb(sizeof(struct ppp_idle), BPRI_HI);
-	    if (mq == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = mq;
-	    mq->b_cont = 0;
-	    pip = (struct ppp_idle *) mq->b_wptr;
-	    pip->xmit_idle = time - ppa->last_sent;
-	    pip->recv_idle = time - ppa->last_recv;
-	    mq->b_wptr += sizeof(struct ppp_idle);
-	    iop->ioc_count = sizeof(struct ppp_idle);
-	    error = 0;
-	    break;
-
-#ifdef LACHTCP
-	case SIOCSIFNAME:
-	    /* Sent from IP down to us.  Attach the ifstats structure.  */
-	    if (iop->ioc_count != sizeof(struct ifreq) || us->ppa == 0)
-	        break;
-	    ifr = (struct ifreq *)mp->b_cont->b_rptr;
-	    /* Find the unit number in the interface name.  */
-	    for (i = 0; i < IFNAMSIZ; i++) {
-		if (ifr->ifr_name[i] == 0 ||
-		    (ifr->ifr_name[i] >= '0' &&
-		     ifr->ifr_name[i] <= '9'))
-		    break;
-		else
-		    us->ifname[i] = ifr->ifr_name[i];
-	    }
-	    us->ifname[i] = 0;
-
-	    /* Convert the unit number to binary.  */
-	    for (n = 0; i < IFNAMSIZ; i++) {
-		if (ifr->ifr_name[i] == 0) {
-		    break;
-		}
-	        else {
-		    n = n * 10 + ifr->ifr_name[i] - '0';
-		}
-	    }
-
-	    /* Verify the ppa.  */
-	    if (us->ppa->ppa_id != n)
-		break;
-	    ppa = us->ppa;
-
-	    /* Set up the netstat block.  */
-	    strncpy (ppa->ifname, us->ifname, IFNAMSIZ);
-
-	    ppa->ifstats.ifs_name = ppa->ifname;
-	    ppa->ifstats.ifs_unit = n;
-	    ppa->ifstats.ifs_active = us->state != DL_UNBOUND;
-	    ppa->ifstats.ifs_mtu = ppa->mtu;
-
-	    /* Link in statistics used by netstat.  */
-	    ppa->ifstats.ifs_next = ifstats;
-	    ifstats = &ppa->ifstats;
-
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case SIOCGIFFLAGS:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-	        else
-		    break;
-	    }
-	    ((struct iocblk_in *)iop)->ioc_ifflags = us->ifflags;
-	    error = 0;
-	    break;
-
-	case SIOCSIFFLAGS:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-		else
-		    break;
-	    }
-	    us->ifflags = ((struct iocblk_in *)iop)->ioc_ifflags;
-	    error = 0;
-	    break;
-
-	case SIOCSIFADDR:
-	    if (!(us->flags & US_CONTROL)) {
-		if (us->ppa)
-		    us = us->ppa;
-		else
-		    break;
-	    }
-	    us->ifflags |= IFF_RUNNING;
-	    ((struct iocblk_in *)iop)->ioc_ifflags |= IFF_RUNNING;
-	    error = 0;
-	    break;
-
-	case SIOCSIFMTU:
-	    /*
-	     * Vanilla SVR4 systems don't handle SIOCSIFMTU, rather
-	     * they take the MTU from the DL_INFO_ACK we sent in response
-	     * to their DL_INFO_REQ.  Fortunately, they will update the
-	     * MTU if we send an unsolicited DL_INFO_ACK up.
-	     */
-	    if ((mq = allocb(sizeof(dl_info_req_t), BPRI_HI)) == 0)
-		break;		/* should do bufcall */
-	    ((union DL_primitives *)mq->b_rptr)->dl_primitive = DL_INFO_REQ;
-	    mq->b_wptr = mq->b_rptr + sizeof(dl_info_req_t);
-	    dlpi_request(q, mq, us);
-	    error = 0;
-	    break;
-
-	case SIOCGIFNETMASK:
-	case SIOCSIFNETMASK:
-	case SIOCGIFADDR:
-	case SIOCGIFDSTADDR:
-	case SIOCSIFDSTADDR:
-	case SIOCGIFMETRIC:
-	    error = 0;
-	    break;
-#endif /* LACHTCP */
-
-	default:
-	    if (us->ppa == 0 || us->ppa->lowerq == 0)
-		break;
-	    us->ioc_id = iop->ioc_id;
-	    error = -1;
-	    switch (iop->ioc_cmd) {
-	    case PPPIO_GETSTAT:
-	    case PPPIO_GETCSTAT:
-		if (us->flags & US_LASTMOD) {
-		    error = EINVAL;
-		    break;
-		}
-		putnext(us->ppa->lowerq, mp);
-		break;
-	    default:
-		if (us->flags & US_PRIV)
-		    putnext(us->ppa->lowerq, mp);
-		else {
-		    DPRINT1("ppp ioctl %x rejected\n", iop->ioc_cmd);
-		    error = EPERM;
-		}
-		break;
-	    }
-	    break;
-	}
-
-	if (error > 0) {
-	    iop->ioc_error = error;
-	    mp->b_datap->db_type = M_IOCNAK;
-	    qreply(q, mp);
-	} else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_FLUSH:
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("ppp/%d: flush %x\n", us->mn, *mp->b_rptr);
-	if (*mp->b_rptr & FLUSHW)
-	    flushq(q, FLUSHDATA);
-	if (*mp->b_rptr & FLUSHR) {
-	    *mp->b_rptr &= ~FLUSHW;
-	    qreply(q, mp);
-	} else
-	    freemsg(mp);
-	break;
-
-    default:
-	freemsg(mp);
-	break;
-    }
-    return 0;
-}
-
-#ifndef NO_DLPI
-static void
-dlpi_request(q, mp, us)
-    queue_t *q;
-    mblk_t *mp;
-    upperstr_t *us;
-{
-    union DL_primitives *d = (union DL_primitives *) mp->b_rptr;
-    int size = mp->b_wptr - mp->b_rptr;
-    mblk_t *reply, *np;
-    upperstr_t *ppa, *os;
-    int sap, len;
-    dl_info_ack_t *info;
-    dl_bind_ack_t *ackp;
-#if DL_CURRENT_VERSION >= 2
-    dl_phys_addr_ack_t	*paddrack;
-    static struct ether_addr eaddr = {0};
-#endif
-
-    if (us->flags & US_DBGLOG)
-	DPRINT3("ppp/%d: dlpi prim %x len=%d\n", us->mn,
-		d->dl_primitive, size);
-    switch (d->dl_primitive) {
-    case DL_INFO_REQ:
-	if (size < sizeof(dl_info_req_t))
-	    goto badprim;
-	if ((reply = allocb(sizeof(dl_info_ack_t), BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	reply->b_datap->db_type = M_PCPROTO;
-	info = (dl_info_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_info_ack_t);
-	bzero((caddr_t) info, sizeof(dl_info_ack_t));
-	info->dl_primitive = DL_INFO_ACK;
-	info->dl_max_sdu = us->ppa? us->ppa->mtu: PPP_MAXMTU;
-	info->dl_min_sdu = 1;
-	info->dl_addr_length = sizeof(uint);
-	info->dl_mac_type = DL_ETHER;	/* a bigger lie */
-	info->dl_current_state = us->state;
-	info->dl_service_mode = DL_CLDLS;
-	info->dl_provider_style = DL_STYLE2;
-#if DL_CURRENT_VERSION >= 2
-	info->dl_sap_length = sizeof(uint);
-	info->dl_version = DL_CURRENT_VERSION;
-#endif
-	qreply(q, reply);
-	break;
-
-    case DL_ATTACH_REQ:
-	if (size < sizeof(dl_attach_req_t))
-	    goto badprim;
-	if (us->state != DL_UNATTACHED || us->ppa != 0) {
-	    dlpi_error(q, us, DL_ATTACH_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	for (ppa = ppas; ppa != 0; ppa = ppa->nextppa)
-	    if (ppa->ppa_id == d->attach_req.dl_ppa)
-		break;
-	if (ppa == 0) {
-	    dlpi_error(q, us, DL_ATTACH_REQ, DL_BADPPA, 0);
-	    break;
-	}
-	us->ppa = ppa;
-	qwriter(q, mp, attach_ppa, PERIM_OUTER);
-	return;
-
-    case DL_DETACH_REQ:
-	if (size < sizeof(dl_detach_req_t))
-	    goto badprim;
-	if (us->state != DL_UNBOUND || us->ppa == 0) {
-	    dlpi_error(q, us, DL_DETACH_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	qwriter(q, mp, detach_ppa, PERIM_OUTER);
-	return;
-
-    case DL_BIND_REQ:
-	if (size < sizeof(dl_bind_req_t))
-	    goto badprim;
-	if (us->state != DL_UNBOUND || us->ppa == 0) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-#if 0
-	/* apparently this test fails (unnecessarily?) on some systems */
-	if (d->bind_req.dl_service_mode != DL_CLDLS) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_UNSUPPORTED, 0);
-	    break;
-	}
-#endif
-
-	/* saps must be valid PPP network protocol numbers,
-	   except that we accept ETHERTYPE_IP in place of PPP_IP. */
-	sap = d->bind_req.dl_sap;
-	us->req_sap = sap;
-
-#if defined(SOL2)
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("DL_BIND_REQ: ip gives sap = 0x%x, us = 0x%x", sap, us);
-
-	if (sap == ETHERTYPE_IP)	    /* normal IFF_IPV4 */
-	    sap = PPP_IP;
-	else if (sap == ETHERTYPE_IPV6)	    /* when IFF_IPV6 is set */
-	    sap = PPP_IPV6;
-	else if (sap == ETHERTYPE_ALLSAP)   /* snoop gives sap of 0 */
-	    sap = PPP_ALLSAP;
-	else {
-	    DPRINT2("DL_BIND_REQ: unrecognized sap = 0x%x, us = 0x%x", sap, us);
-	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
-	    break;
-	}
-#else
-	if (sap == ETHERTYPE_IP)
-	    sap = PPP_IP;
-	if (sap < 0x21 || sap > 0x3fff || (sap & 0x101) != 1) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_BADADDR, 0);
-	    break;
-	}
-#endif /* defined(SOL2) */
-
-	/* check that no other stream is bound to this sap already. */
-	for (os = us->ppa; os != 0; os = os->next)
-	    if (os->sap == sap)
-		break;
-	if (os != 0) {
-	    dlpi_error(q, us, DL_BIND_REQ, DL_NOADDR, 0);
-	    break;
-	}
-
-	us->sap = sap;
-	us->state = DL_IDLE;
-
-	if ((reply = allocb(sizeof(dl_bind_ack_t) + sizeof(uint),
-			    BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	ackp = (dl_bind_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_bind_ack_t) + sizeof(uint);
-	reply->b_datap->db_type = M_PCPROTO;
-	bzero((caddr_t) ackp, sizeof(dl_bind_ack_t));
-	ackp->dl_primitive = DL_BIND_ACK;
-	ackp->dl_sap = sap;
-	ackp->dl_addr_length = sizeof(uint);
-	ackp->dl_addr_offset = sizeof(dl_bind_ack_t);
-	*(uint *)(ackp+1) = sap;
-	qreply(q, reply);
-	break;
-
-    case DL_UNBIND_REQ:
-	if (size < sizeof(dl_unbind_req_t))
-	    goto badprim;
-	if (us->state != DL_IDLE) {
-	    dlpi_error(q, us, DL_UNBIND_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	us->sap = -1;
-	us->state = DL_UNBOUND;
-#ifdef LACHTCP
-	us->ppa->ifstats.ifs_active = 0;
-#endif
-	dlpi_ok(q, DL_UNBIND_REQ);
-	break;
-
-    case DL_UNITDATA_REQ:
-	if (size < sizeof(dl_unitdata_req_t))
-	    goto badprim;
-	if (us->state != DL_IDLE) {
-	    dlpi_error(q, us, DL_UNITDATA_REQ, DL_OUTSTATE, 0);
-	    break;
-	}
-	if ((ppa = us->ppa) == 0) {
-	    cmn_err(CE_CONT, "ppp: in state dl_idle but ppa == 0?\n");
-	    break;
-	}
-	len = mp->b_cont == 0? 0: msgdsize(mp->b_cont);
-	if (len > ppa->mtu) {
-	    DPRINT2("dlpi data too large (%d > %d)\n", len, ppa->mtu);
-	    break;
-	}
-
-#if defined(SOL2)
-	/*
-	 * Should there be any promiscuous stream(s), send the data
-	 * up for each promiscuous stream that we recognize.
-	 */
-	if (mp->b_cont)
-	    promisc_sendup(ppa, mp->b_cont, us->sap, 0);
-#endif /* defined(SOL2) */
-
-	mp->b_band = 0;
-#ifdef PRIOQ
-        /* Extract s_port & d_port from IP-packet, the code is a bit
-           dirty here, but so am I, too... */
-        if (mp->b_datap->db_type == M_PROTO && us->sap == PPP_IP
-	    && mp->b_cont != 0) {
-	    u_char *bb, *tlh;
-	    int iphlen, len;
-	    u_short *ptr;
-	    u_char band_unset, cur_band, syn;
-	    u_short s_port, d_port;
-
-            bb = mp->b_cont->b_rptr; /* bb points to IP-header*/
-	    len = mp->b_cont->b_wptr - mp->b_cont->b_rptr;
-            syn = 0;
-	    s_port = IPPORT_DEFAULT;
-	    d_port = IPPORT_DEFAULT;
-	    if (len >= 20) {	/* 20 = minimum length of IP header */
-		iphlen = (bb[0] & 0x0f) * 4;
-		tlh = bb + iphlen;
-		len -= iphlen;
-		switch (bb[9]) {
-		case IPPROTO_TCP:
-		    if (len >= 20) {	      /* min length of TCP header */
-			s_port = (tlh[0] << 8) + tlh[1];
-			d_port = (tlh[2] << 8) + tlh[3];
-			syn = tlh[13] & 0x02;
-		    }
-		    break;
-		case IPPROTO_UDP:
-		    if (len >= 8) {	      /* min length of UDP header */
-			s_port = (tlh[0] << 8) + tlh[1];
-			d_port = (tlh[2] << 8) + tlh[3];
-		    }
-		    break;
-		}
-	    }
-
-            /*
-	     * Now calculate b_band for this packet from the
-	     * port-priority table.
-	     */
-            ptr = prioq_table;
-            cur_band = max_band;
-            band_unset = 1;
-            while (*ptr) {
-                while (*ptr && band_unset)
-                    if (s_port == *ptr || d_port == *ptr++) {
-                        mp->b_band = cur_band;
-                        band_unset = 0;
-                        break;
-		    }
-                ptr++;
-                cur_band--;
-	    }
-            if (band_unset)
-		mp->b_band = def_band;
-            /* It may be usable to urge SYN packets a bit */
-            if (syn)
-		mp->b_band++;
-	}
-#endif	/* PRIOQ */
-	/* this assumes PPP_HDRLEN <= sizeof(dl_unitdata_req_t) */
-	if (mp->b_datap->db_ref > 1) {
-	    np = allocb(PPP_HDRLEN, BPRI_HI);
-	    if (np == 0)
-		break;		/* gak! */
-	    np->b_cont = mp->b_cont;
-	    mp->b_cont = 0;
-	    freeb(mp);
-	    mp = np;
-	} else
-	    mp->b_datap->db_type = M_DATA;
-	/* XXX should use dl_dest_addr_offset/length here,
-	   but we would have to translate ETHERTYPE_IP -> PPP_IP */
-	mp->b_wptr = mp->b_rptr + PPP_HDRLEN;
-	mp->b_rptr[0] = PPP_ALLSTATIONS;
-	mp->b_rptr[1] = PPP_UI;
-	mp->b_rptr[2] = us->sap >> 8;
-	mp->b_rptr[3] = us->sap;
-	if (pass_packet(us, mp, 1)) {
-	    if (!send_data(mp, us))
-		putq(q, mp);
-	}
-	return;
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_PHYS_ADDR_REQ:
-	if (size < sizeof(dl_phys_addr_req_t))
-	    goto badprim;
-
-	/*
-	 * Don't check state because ifconfig sends this one down too
-	 */
-
-	if ((reply = allocb(sizeof(dl_phys_addr_ack_t)+ETHERADDRL, 
-			BPRI_HI)) == 0)
-	    break;		/* should do bufcall */
-	reply->b_datap->db_type = M_PCPROTO;
-	paddrack = (dl_phys_addr_ack_t *) reply->b_wptr;
-	reply->b_wptr += sizeof(dl_phys_addr_ack_t);
-	bzero((caddr_t) paddrack, sizeof(dl_phys_addr_ack_t)+ETHERADDRL);
-	paddrack->dl_primitive = DL_PHYS_ADDR_ACK;
-	paddrack->dl_addr_length = ETHERADDRL;
-	paddrack->dl_addr_offset = sizeof(dl_phys_addr_ack_t);
-	bcopy(&eaddr, reply->b_wptr, ETHERADDRL);
-	reply->b_wptr += ETHERADDRL;
-	qreply(q, reply);
-	break;
-
-#if defined(SOL2)
-    case DL_PROMISCON_REQ:
-	if (size < sizeof(dl_promiscon_req_t))
-	    goto badprim;
-	us->flags |= US_PROMISC;
-	dlpi_ok(q, DL_PROMISCON_REQ);
-	break;
-
-    case DL_PROMISCOFF_REQ:
-	if (size < sizeof(dl_promiscoff_req_t))
-	    goto badprim;
-	us->flags &= ~US_PROMISC;
-	dlpi_ok(q, DL_PROMISCOFF_REQ);
-	break;
-#else
-    case DL_PROMISCON_REQ:	    /* fall thru */
-    case DL_PROMISCOFF_REQ:	    /* fall thru */
-#endif /* defined(SOL2) */
-#endif /* DL_CURRENT_VERSION >= 2 */
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_SET_PHYS_ADDR_REQ:
-    case DL_SUBS_BIND_REQ:
-    case DL_SUBS_UNBIND_REQ:
-    case DL_ENABMULTI_REQ:
-    case DL_DISABMULTI_REQ:
-    case DL_XID_REQ:
-    case DL_TEST_REQ:
-    case DL_REPLY_UPDATE_REQ:
-    case DL_REPLY_REQ:
-    case DL_DATA_ACK_REQ:
-#endif
-    case DL_CONNECT_REQ:
-    case DL_TOKEN_REQ:
-	dlpi_error(q, us, d->dl_primitive, DL_NOTSUPPORTED, 0);
-	break;
-
-    case DL_CONNECT_RES:
-    case DL_DISCONNECT_REQ:
-    case DL_RESET_REQ:
-    case DL_RESET_RES:
-	dlpi_error(q, us, d->dl_primitive, DL_OUTSTATE, 0);
-	break;
-
-    case DL_UDQOS_REQ:
-	dlpi_error(q, us, d->dl_primitive, DL_BADQOSTYPE, 0);
-	break;
-
-#if DL_CURRENT_VERSION >= 2
-    case DL_TEST_RES:
-    case DL_XID_RES:
-	break;
-#endif
-
-    default:
-	cmn_err(CE_CONT, "ppp: unknown dlpi prim 0x%x\n", d->dl_primitive);
-	/* fall through */
-    badprim:
-	dlpi_error(q, us, d->dl_primitive, DL_BADPRIM, 0);
-	break;
-    }
-    freemsg(mp);
-}
-
-static void
-dlpi_error(q, us, prim, err, uerr)
-    queue_t *q;
-    upperstr_t *us;
-    int prim, err, uerr;
-{
-    mblk_t *reply;
-    dl_error_ack_t *errp;
-
-    if (us->flags & US_DBGLOG)
-        DPRINT3("ppp/%d: dlpi error, prim=%x, err=%x\n", us->mn, prim, err);
-    reply = allocb(sizeof(dl_error_ack_t), BPRI_HI);
-    if (reply == 0)
-	return;			/* XXX should do bufcall */
-    reply->b_datap->db_type = M_PCPROTO;
-    errp = (dl_error_ack_t *) reply->b_wptr;
-    reply->b_wptr += sizeof(dl_error_ack_t);
-    errp->dl_primitive = DL_ERROR_ACK;
-    errp->dl_error_primitive = prim;
-    errp->dl_errno = err;
-    errp->dl_unix_errno = uerr;
-    qreply(q, reply);
-}
-
-static void
-dlpi_ok(q, prim)
-    queue_t *q;
-    int prim;
-{
-    mblk_t *reply;
-    dl_ok_ack_t *okp;
-
-    reply = allocb(sizeof(dl_ok_ack_t), BPRI_HI);
-    if (reply == 0)
-	return;			/* XXX should do bufcall */
-    reply->b_datap->db_type = M_PCPROTO;
-    okp = (dl_ok_ack_t *) reply->b_wptr;
-    reply->b_wptr += sizeof(dl_ok_ack_t);
-    okp->dl_primitive = DL_OK_ACK;
-    okp->dl_correct_primitive = prim;
-    qreply(q, reply);
-}
-#endif /* NO_DLPI */
-
-static int
-pass_packet(us, mp, outbound)
-    upperstr_t *us;
-    mblk_t *mp;
-    int outbound;
-{
-    int pass;
-    upperstr_t *ppa;
-
-    if ((ppa = us->ppa) == 0) {
-	freemsg(mp);
-	return 0;
-    }
-
-#ifdef FILTER_PACKETS
-    pass = ip_hard_filter(us, mp, outbound);
-#else
-    /*
-     * Here is where we might, in future, decide whether to pass
-     * or drop the packet, and whether it counts as link activity.
-     */
-    pass = 1;
-#endif /* FILTER_PACKETS */
-
-    if (pass < 0) {
-	/* pass only if link already up, and don't update time */
-	if (ppa->lowerq == 0) {
-	    freemsg(mp);
-	    return 0;
-	}
-	pass = 1;
-    } else if (pass) {
-	if (outbound)
-	    ppa->last_sent = time;
-	else
-	    ppa->last_recv = time;
-    }
-
-    return pass;
-}
-
-/*
- * We have some data to send down to the lower stream (or up the
- * control stream, if we don't have a lower stream attached).
- * Returns 1 if the message was dealt with, 0 if it wasn't able
- * to be sent on and should therefore be queued up.
- */
-static int
-send_data(mp, us)
-    mblk_t *mp;
-    upperstr_t *us;
-{
-    upperstr_t *ppa;
-
-    if ((us->flags & US_BLOCKED) || us->npmode == NPMODE_QUEUE)
-	return 0;
-    ppa = us->ppa;
-    if (ppa == 0 || us->npmode == NPMODE_DROP || us->npmode == NPMODE_ERROR) {
-	if (us->flags & US_DBGLOG)
-	    DPRINT2("ppp/%d: dropping pkt (npmode=%d)\n", us->mn, us->npmode);
-	freemsg(mp);
-	return 1;
-    }
-    if (ppa->lowerq == 0) {
-	/* try to send it up the control stream */
-        if (bcanputnext(ppa->q, mp->b_band)) {
-	    /*
-	     * The message seems to get corrupted for some reason if
-	     * we just send the message up as it is, so we send a copy.
-	     */
-	    mblk_t *np = copymsg(mp);
-	    freemsg(mp);
-	    if (np != 0)
-		putnext(ppa->q, np);
-	    return 1;
-	}
-    } else {
-        if (bcanputnext(ppa->lowerq, mp->b_band)) {
-	    MT_ENTER(&ppa->stats_lock);
-	    ppa->stats.ppp_opackets++;
-	    ppa->stats.ppp_obytes += msgdsize(mp);
-#ifdef INCR_OPACKETS
-	    INCR_OPACKETS(ppa);
-#endif
-	    MT_EXIT(&ppa->stats_lock);
-	    /*
-	     * The lower queue is only ever detached while holding an
-	     * exclusive lock on the whole driver.  So we can be confident
-	     * that the lower queue is still there.
-	     */
-	    putnext(ppa->lowerq, mp);
-	    return 1;
-	}
-    }
-    us->flags |= US_BLOCKED;
-    return 0;
-}
-
-/*
- * Allocate a new PPA id and link this stream into the list of PPAs.
- * This procedure is called with an exclusive lock on all queues in
- * this driver.
- */
-static void
-new_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *up, **usp;
-    int ppa_id;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("new_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-    usp = &ppas;
-    ppa_id = 0;
-    while ((up = *usp) != 0 && ppa_id == up->ppa_id) {
-	++ppa_id;
-	usp = &up->nextppa;
-    }
-    us->ppa_id = ppa_id;
-    us->ppa = us;
-    us->next = 0;
-    us->nextppa = *usp;
-    *usp = us;
-    us->flags |= US_CONTROL;
-    us->npmode = NPMODE_PASS;
-
-    us->mtu = PPP_MTU;
-    us->mru = PPP_MRU;
-
-#ifdef SOL2
-    /*
-     * Create a kstats record for our statistics, so netstat -i works.
-     */
-    if (us->kstats == 0) {
-	char unit[32];
-
-	sprintf(unit, "ppp%d", us->ppa->ppa_id);
-	us->kstats = kstat_create("ppp", us->ppa->ppa_id, unit,
-				  "net", KSTAT_TYPE_NAMED, 4, 0);
-	if (us->kstats != 0) {
-	    kstat_named_t *kn = KSTAT_NAMED_PTR(us->kstats);
-
-	    strcpy(kn[0].name, "ipackets");
-	    kn[0].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[1].name, "ierrors");
-	    kn[1].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[2].name, "opackets");
-	    kn[2].data_type = KSTAT_DATA_ULONG;
-	    strcpy(kn[3].name, "oerrors");
-	    kn[3].data_type = KSTAT_DATA_ULONG;
-	    kstat_install(us->kstats);
-	}
-    }
-#endif /* SOL2 */
-
-    *(int *)mp->b_cont->b_rptr = ppa_id;
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-static void
-attach_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *t;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("attach_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-#ifndef NO_DLPI
-    us->state = DL_UNBOUND;
-#endif
-    for (t = us->ppa; t->next != 0; t = t->next)
-	;
-    t->next = us;
-    us->next = 0;
-    if (mp->b_datap->db_type == M_IOCTL) {
-	mp->b_datap->db_type = M_IOCACK;
-	qreply(q, mp);
-    } else {
-#ifndef NO_DLPI
-	dlpi_ok(q, DL_ATTACH_REQ);
-#endif
-    }
-}
-
-static void
-detach_ppa(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us, *t;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("detach_ppa: q_ptr = 0!\n");
-	return;
-    }
-
-    for (t = us->ppa; t->next != 0; t = t->next)
-	if (t->next == us) {
-	    t->next = us->next;
-	    break;
-	}
-    us->next = 0;
-    us->ppa = 0;
-#ifndef NO_DLPI
-    us->state = DL_UNATTACHED;
-    dlpi_ok(q, DL_DETACH_REQ);
-#endif
-}
-
-/*
- * We call this with qwriter in order to give the upper queue procedures
- * the guarantee that the lower queue is not going to go away while
- * they are executing.
- */
-static void
-detach_lower(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("detach_lower: q_ptr = 0!\n");
-	return;
-    }
-
-    LOCK_LOWER_W;
-    us->lowerq->q_ptr = 0;
-    RD(us->lowerq)->q_ptr = 0;
-    us->lowerq = 0;
-    UNLOCK_LOWER;
-
-    /* Unblock streams which now feed back up the control stream. */
-    qenable(us->q);
-
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-static int
-pppuwsrv(q)
-    queue_t *q;
-{
-    upperstr_t *us, *as;
-    mblk_t *mp;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppuwsrv: q_ptr = 0!\n");
-	return 0;
-    }
-
-    /*
-     * If this is a control stream, then this service procedure
-     * probably got enabled because of flow control in the lower
-     * stream being enabled (or because of the lower stream going
-     * away).  Therefore we enable the service procedure of all
-     * attached upper streams.
-     */
-    if (us->flags & US_CONTROL) {
-	for (as = us->next; as != 0; as = as->next)
-	    qenable(WR(as->q));
-    }
-
-    /* Try to send on any data queued here. */
-    us->flags &= ~US_BLOCKED;
-    while ((mp = getq(q)) != 0) {
-	if (!send_data(mp, us)) {
-	    putbq(q, mp);
-	    break;
-	}
-    }
-
-    return 0;
-}
-
-/* should never get called... */
-static int
-ppplwput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    putnext(q, mp);
-    return 0;
-}
-
-static int
-ppplwsrv(q)
-    queue_t *q;
-{
-    queue_t *uq;
-
-    /*
-     * Flow control has back-enabled this stream:
-     * enable the upper write service procedure for
-     * the upper control stream for this lower stream.
-     */
-    LOCK_LOWER_R;
-    uq = (queue_t *) q->q_ptr;
-    if (uq != 0)
-	qenable(uq);
-    UNLOCK_LOWER;
-    return 0;
-}
-
-/*
- * This should only get called for control streams.
- */
-static int
-pppurput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *ppa, *us;
-    int proto, len;
-    struct iocblk *iop;
-
-    ppa = (upperstr_t *) q->q_ptr;
-    if (ppa == 0) {
-	DPRINT("pppurput: q_ptr = 0!\n");
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_CTL:
-	MT_ENTER(&ppa->stats_lock);
-	switch (*mp->b_rptr) {
-	case PPPCTL_IERROR:
-#ifdef INCR_IERRORS
-	    INCR_IERRORS(ppa);
-#endif
-	    ppa->stats.ppp_ierrors++;
-	    break;
-	case PPPCTL_OERROR:
-#ifdef INCR_OERRORS
-	    INCR_OERRORS(ppa);
-#endif
-	    ppa->stats.ppp_oerrors++;
-	    break;
-	}
-	MT_EXIT(&ppa->stats_lock);
-	freemsg(mp);
-	break;
-
-    case M_IOCACK:
-    case M_IOCNAK:
-	/*
-	 * Attempt to match up the response with the stream
-	 * that the request came from.
-	 */
-	iop = (struct iocblk *) mp->b_rptr;
-	for (us = ppa; us != 0; us = us->next)
-	    if (us->ioc_id == iop->ioc_id)
-		break;
-	if (us == 0)
-	    freemsg(mp);
-	else
-	    putnext(us->q, mp);
-	break;
-
-    case M_HANGUP:
-	/*
-	 * The serial device has hung up.  We don't want to send
-	 * the M_HANGUP message up to pppd because that will stop
-	 * us from using the control stream any more.  Instead we
-	 * send a zero-length message as an end-of-file indication.
-	 */
-	freemsg(mp);
-	mp = allocb(1, BPRI_HI);
-	if (mp == 0) {
-	    DPRINT1("ppp/%d: couldn't allocate eof message!\n", ppa->mn);
-	    break;
-	}
-	putnext(ppa->q, mp);
-	break;
-
-    default:
-	if (mp->b_datap->db_type == M_DATA) {
-	    len = msgdsize(mp);
-	    if (mp->b_wptr - mp->b_rptr < PPP_HDRLEN) {
-		PULLUP(mp, PPP_HDRLEN);
-		if (mp == 0) {
-		    DPRINT1("ppp_urput: msgpullup failed (len=%d)\n", len);
-		    break;
-		}
-	    }
-	    MT_ENTER(&ppa->stats_lock);
-	    ppa->stats.ppp_ipackets++;
-	    ppa->stats.ppp_ibytes += len;
-#ifdef INCR_IPACKETS
-	    INCR_IPACKETS(ppa);
-#endif
-	    MT_EXIT(&ppa->stats_lock);
-
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-
-#if defined(SOL2)
-	    /*
-	     * Should there be any promiscuous stream(s), send the data
-	     * up for each promiscuous stream that we recognize.
-	     */
-	    promisc_sendup(ppa, mp, proto, 1);
-#endif /* defined(SOL2) */
-
-	    if (proto < 0x8000 && (us = find_dest(ppa, proto)) != 0) {
-		/*
-		 * A data packet for some network protocol.
-		 * Queue it on the upper stream for that protocol.
-		 * XXX could we just putnext it?  (would require thought)
-		 * The rblocked flag is there to ensure that we keep
-		 * messages in order for each network protocol.
-		 */
-		if (!pass_packet(us, mp, 0))
-		    break;
-		if (!us->rblocked && !canput(us->q))
-		    us->rblocked = 1;
-		if (!us->rblocked)
-		    putq(us->q, mp);
-		else
-		    putq(q, mp);
-		break;
-	    }
-	}
-	/*
-	 * A control frame, a frame for an unknown protocol,
-	 * or some other message type.
-	 * Send it up to pppd via the control stream.
-	 */
-	if (queclass(mp) == QPCTL || canputnext(ppa->q))
-	    putnext(ppa->q, mp);
-	else
-	    putq(q, mp);
-	break;
-    }
-
-    return 0;
-}
-
-static int
-pppursrv(q)
-    queue_t *q;
-{
-    upperstr_t *us, *as;
-    mblk_t *mp, *hdr;
-#ifndef NO_DLPI
-    dl_unitdata_ind_t *ud;
-#endif
-    int proto;
-
-    us = (upperstr_t *) q->q_ptr;
-    if (us == 0) {
-	DPRINT("pppursrv: q_ptr = 0!\n");
-	return 0;
-    }
-
-    if (us->flags & US_CONTROL) {
-	/*
-	 * A control stream.
-	 * If there is no lower queue attached, run the write service
-	 * routines of other upper streams attached to this PPA.
-	 */
-	if (us->lowerq == 0) {
-	    as = us;
-	    do {
-		if (as->flags & US_BLOCKED)
-		    qenable(WR(as->q));
-		as = as->next;
-	    } while (as != 0);
-	}
-
-	/*
-	 * Messages get queued on this stream's read queue if they
-	 * can't be queued on the read queue of the attached stream
-	 * that they are destined for.  This is for flow control -
-	 * when this queue fills up, the lower read put procedure will
-	 * queue messages there and the flow control will propagate
-	 * down from there.
-	 */
-	while ((mp = getq(q)) != 0) {
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-	    if (proto < 0x8000 && (as = find_dest(us, proto)) != 0) {
-		if (!canput(as->q))
-		    break;
-		putq(as->q, mp);
-	    } else {
-		if (!canputnext(q))
-		    break;
-		putnext(q, mp);
-	    }
-	}
-	if (mp) {
-	    putbq(q, mp);
-	} else {
-	    /* can now put stuff directly on network protocol streams again */
-	    for (as = us->next; as != 0; as = as->next)
-		as->rblocked = 0;
-	}
-
-	/*
-	 * If this stream has a lower stream attached,
-	 * enable the read queue's service routine.
-	 * XXX we should really only do this if the queue length
-	 * has dropped below the low-water mark.
-	 */
-	if (us->lowerq != 0)
-	    qenable(RD(us->lowerq));
-		
-    } else {
-	/*
-	 * A network protocol stream.  Put a DLPI header on each
-	 * packet and send it on.
-	 * (Actually, it seems that the IP module will happily
-	 * accept M_DATA messages without the DL_UNITDATA_IND header.)
-	 */
-	while ((mp = getq(q)) != 0) {
-	    if (!canputnext(q)) {
-		putbq(q, mp);
-		break;
-	    }
-#ifndef NO_DLPI
-	    proto = PPP_PROTOCOL(mp->b_rptr);
-	    mp->b_rptr += PPP_HDRLEN;
-	    hdr = allocb(sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint),
-			 BPRI_MED);
-	    if (hdr == 0) {
-		/* XXX should put it back and use bufcall */
-		freemsg(mp);
-		continue;
-	    }
-	    hdr->b_datap->db_type = M_PROTO;
-	    ud = (dl_unitdata_ind_t *) hdr->b_wptr;
-	    hdr->b_wptr += sizeof(dl_unitdata_ind_t) + 2 * sizeof(uint);
-	    hdr->b_cont = mp;
-	    ud->dl_primitive = DL_UNITDATA_IND;
-	    ud->dl_dest_addr_length = sizeof(uint);
-	    ud->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
-	    ud->dl_src_addr_length = sizeof(uint);
-	    ud->dl_src_addr_offset = ud->dl_dest_addr_offset + sizeof(uint);
-#if DL_CURRENT_VERSION >= 2
-	    ud->dl_group_address = 0;
-#endif
-	    /* Send the DLPI client the data with the SAP they requested,
-	       (e.g. ETHERTYPE_IP) rather than the PPP protocol number
-	       (e.g. PPP_IP) */
-	    ((uint *)(ud + 1))[0] = us->req_sap;	/* dest SAP */
-	    ((uint *)(ud + 1))[1] = us->req_sap;	/* src SAP */
-	    putnext(q, hdr);
-#else /* NO_DLPI */
-	    putnext(q, mp);
-#endif /* NO_DLPI */
-	}
-	/*
-	 * Now that we have consumed some packets from this queue,
-	 * enable the control stream's read service routine so that we
-	 * can process any packets for us that might have got queued
-	 * there for flow control reasons.
-	 */
-	if (us->ppa)
-	    qenable(us->ppa->q);
-    }
-
-    return 0;
-}
-
-static upperstr_t *
-find_dest(ppa, proto)
-    upperstr_t *ppa;
-    int proto;
-{
-    upperstr_t *us;
-
-    for (us = ppa->next; us != 0; us = us->next)
-	if (proto == us->sap)
-	    break;
-    return us;
-}
-
-#if defined (SOL2)
-/*
- * Test upstream promiscuous conditions. As of now, only pass IPv4 and
- * Ipv6 packets upstream (let PPP packets be decoded elsewhere).
- */
-static upperstr_t *
-find_promisc(us, proto)
-    upperstr_t *us;
-    int proto;
-{
-
-    if ((proto != PPP_IP) && (proto != PPP_IPV6))
-	return (upperstr_t *)0;
-
-    for ( ; us; us = us->next) {
-	if ((us->flags & US_PROMISC) && (us->state == DL_IDLE))
-	    return us;
-    }
-
-    return (upperstr_t *)0;
-}
-
-/*
- * Prepend an empty Ethernet header to msg for snoop, et al.
- */
-static mblk_t *
-prepend_ether(us, mp, proto)
-    upperstr_t *us;
-    mblk_t *mp;
-    int proto;
-{
-    mblk_t *eh;
-    int type;
-
-    if ((eh = allocb(sizeof(struct ether_header), BPRI_HI)) == 0) {
-	freemsg(mp);
-	return (mblk_t *)0;
-    }
-
-    if (proto == PPP_IP)
-	type = ETHERTYPE_IP;
-    else if (proto == PPP_IPV6)
-	type = ETHERTYPE_IPV6;
-    else 
-	type = proto;	    /* What else? Let decoder decide */
-
-    eh->b_wptr += sizeof(struct ether_header);
-    bzero((caddr_t)eh->b_rptr, sizeof(struct ether_header));
-    ((struct ether_header *)eh->b_rptr)->ether_type = htons((short)type);
-    eh->b_cont = mp;
-    return (eh);
-}
-
-/*
- * Prepend DL_UNITDATA_IND mblk to msg
- */
-static mblk_t *
-prepend_udind(us, mp, proto)
-    upperstr_t *us;
-    mblk_t *mp;
-    int proto;
-{
-    dl_unitdata_ind_t *dlu;
-    mblk_t *dh;
-    size_t size;
-
-    size = sizeof(dl_unitdata_ind_t);
-    if ((dh = allocb(size, BPRI_MED)) == 0) {
-	freemsg(mp);
-	return (mblk_t *)0;
-    }
-
-    dh->b_datap->db_type = M_PROTO;
-    dh->b_wptr = dh->b_datap->db_lim;
-    dh->b_rptr = dh->b_wptr - size;
-
-    dlu = (dl_unitdata_ind_t *)dh->b_rptr;
-    dlu->dl_primitive = DL_UNITDATA_IND;
-    dlu->dl_dest_addr_length = 0;
-    dlu->dl_dest_addr_offset = sizeof(dl_unitdata_ind_t);
-    dlu->dl_src_addr_length = 0;
-    dlu->dl_src_addr_offset = sizeof(dl_unitdata_ind_t);
-    dlu->dl_group_address = 0;
-
-    dh->b_cont = mp;
-    return (dh);
-}
-
-/*
- * For any recognized promiscuous streams, send data upstream
- */
-static void
-promisc_sendup(ppa, mp, proto, skip)
-    upperstr_t *ppa;
-    mblk_t *mp;
-    int proto, skip;
-{
-    mblk_t *dup_mp, *dup_dup_mp;
-    upperstr_t *prus, *nprus;
-
-    if ((prus = find_promisc(ppa, proto)) != 0) {
-	if (dup_mp = dupmsg(mp)) {
-
-	    if (skip)
-		dup_mp->b_rptr += PPP_HDRLEN;
-
-	    for ( ; nprus = find_promisc(prus->next, proto); 
-		    prus = nprus) {
-
-		if (dup_dup_mp = dupmsg(dup_mp)) {
-		    if (canputnext(prus->q)) {
-			if (prus->flags & US_RAWDATA) {
-			    dup_dup_mp = prepend_ether(prus, dup_dup_mp, proto);
-			    putnext(prus->q, dup_dup_mp);
-			} else {
-			    dup_dup_mp = prepend_udind(prus, dup_dup_mp, proto);
-			    putnext(prus->q, dup_dup_mp);
-			}
-		    } else {
-			DPRINT("ppp_urput: data to promisc q dropped\n");
-			freemsg(dup_dup_mp);
-		    }
-		}
-	    }
-
-	    if (canputnext(prus->q)) {
-		if (prus->flags & US_RAWDATA) {
-		    dup_mp = prepend_ether(prus, dup_mp, proto);
-		    putnext(prus->q, dup_mp);
-		} else {
-		    dup_mp = prepend_udind(prus, dup_mp, proto);
-		    putnext(prus->q, dup_mp);
-		}
-	    } else {
-		DPRINT("ppp_urput: data to promisc q dropped\n");
-		freemsg(dup_mp);
-	    }
-	}
-    }
-}
-#endif /* defined(SOL2) */
-
-/*
- * We simply put the message on to the associated upper control stream
- * (either here or in ppplrsrv).  That way we enter the perimeters
- * before looking through the list of attached streams to decide which
- * stream it should go up.
- */
-static int
-ppplrput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    queue_t *uq;
-    struct iocblk *iop;
-
-    switch (mp->b_datap->db_type) {
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	iop->ioc_error = EINVAL;
-	mp->b_datap->db_type = M_IOCNAK;
-	qreply(q, mp);
-	return 0;
-    case M_FLUSH:
-	if (*mp->b_rptr & FLUSHR)
-	    flushq(q, FLUSHDATA);
-	if (*mp->b_rptr & FLUSHW) {
-	    *mp->b_rptr &= ~FLUSHR;
-	    qreply(q, mp);
-	} else
-	    freemsg(mp);
-	return 0;
-    }
-
-    /*
-     * If we can't get the lower lock straight away, queue this one
-     * rather than blocking, to avoid the possibility of deadlock.
-     */
-    if (!TRYLOCK_LOWER_R) {
-	putq(q, mp);
-	return 0;
-    }
-
-    /*
-     * Check that we're still connected to the driver.
-     */
-    uq = (queue_t *) q->q_ptr;
-    if (uq == 0) {
-	UNLOCK_LOWER;
-	DPRINT1("ppplrput: q = %x, uq = 0??\n", q);
-	freemsg(mp);
-	return 0;
-    }
-
-    /*
-     * Try to forward the message to the put routine for the upper
-     * control stream for this lower stream.
-     * If there are already messages queued here, queue this one so
-     * they don't get out of order.
-     */
-    if (queclass(mp) == QPCTL || (qsize(q) == 0 && canput(uq)))
-	put(uq, mp);
-    else
-	putq(q, mp);
-
-    UNLOCK_LOWER;
-    return 0;
-}
-
-static int
-ppplrsrv(q)
-    queue_t *q;
-{
-    mblk_t *mp;
-    queue_t *uq;
-
-    /*
-     * Packets get queued here for flow control reasons
-     * or if the lrput routine couldn't get the lower lock
-     * without blocking.
-     */
-    LOCK_LOWER_R;
-    uq = (queue_t *) q->q_ptr;
-    if (uq == 0) {
-	UNLOCK_LOWER;
-	flushq(q, FLUSHALL);
-	DPRINT1("ppplrsrv: q = %x, uq = 0??\n", q);
-	return 0;
-    }
-    while ((mp = getq(q)) != 0) {
-	if (queclass(mp) == QPCTL || canput(uq))
-	    put(uq, mp);
-	else {
-	    putbq(q, mp);
-	    break;
-	}
-    }
-    UNLOCK_LOWER;
-    return 0;
-}
-
-static int
-putctl2(q, type, code, val)
-    queue_t *q;
-    int type, code, val;
-{
-    mblk_t *mp;
-
-    mp = allocb(2, BPRI_HI);
-    if (mp == 0)
-	return 0;
-    mp->b_datap->db_type = type;
-    mp->b_wptr[0] = code;
-    mp->b_wptr[1] = val;
-    mp->b_wptr += 2;
-    putnext(q, mp);
-    return 1;
-}
-
-static int
-putctl4(q, type, code, val)
-    queue_t *q;
-    int type, code, val;
-{
-    mblk_t *mp;
-
-    mp = allocb(4, BPRI_HI);
-    if (mp == 0)
-	return 0;
-    mp->b_datap->db_type = type;
-    mp->b_wptr[0] = code;
-    ((short *)mp->b_wptr)[1] = val;
-    mp->b_wptr += 4;
-    putnext(q, mp);
-    return 1;
-}
-
-static void
-debug_dump(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    upperstr_t *us;
-    queue_t *uq, *lq;
-
-    DPRINT("ppp upper streams:\n");
-    for (us = minor_devs; us != 0; us = us->nextmn) {
-	uq = us->q;
-	DPRINT3(" %d: q=%x rlev=%d",
-		us->mn, uq, (uq? qsize(uq): 0));
-	DPRINT3(" wlev=%d flags=0x%b", (uq? qsize(WR(uq)): 0),
-		us->flags, "\020\1priv\2control\3blocked\4last");
-	DPRINT3(" state=%x sap=%x req_sap=%x", us->state, us->sap,
-		us->req_sap);
-	if (us->ppa == 0)
-	    DPRINT(" ppa=?\n");
-	else
-	    DPRINT1(" ppa=%d\n", us->ppa->ppa_id);
-	if (us->flags & US_CONTROL) {
-	    lq = us->lowerq;
-	    DPRINT3("    control for %d lq=%x rlev=%d",
-		    us->ppa_id, lq, (lq? qsize(RD(lq)): 0));
-	    DPRINT3(" wlev=%d mru=%d mtu=%d\n",
-		    (lq? qsize(lq): 0), us->mru, us->mtu);
-	}
-    }
-    mp->b_datap->db_type = M_IOCACK;
-    qreply(q, mp);
-}
-
-#ifdef FILTER_PACKETS
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <netinet/udp.h>
-#include <netinet/tcp.h>
-
-#define MAX_IPHDR    128     /* max TCP/IP header size */
-
-
-/* The following table contains a hard-coded list of protocol/port pairs.
- * Any matching packets are either discarded unconditionally, or, 
- * if ok_if_link_up is non-zero when a connection does not currently exist
- * (i.e., they go through if the connection is present, but never initiate
- * a dial-out).
- * This idea came from a post by dm@garage.uun.org (David Mazieres)
- */
-static struct pktfilt_tab { 
-	int proto; 
-	u_short port; 
-	u_short ok_if_link_up; 
-} pktfilt_tab[] = {
-	{ IPPROTO_UDP,	520,	1 },	/* RIP, ok to pass if link is up */
-	{ IPPROTO_UDP,	123,	1 },	/* NTP, don't keep up the link for it */
-	{ -1, 		0,	0 }	/* terminator entry has port == -1 */
-};
-
-
-static int
-ip_hard_filter(us, mp, outbound)
-    upperstr_t *us;
-    mblk_t *mp;
-    int outbound;
-{
-    struct ip *ip;
-    struct pktfilt_tab *pft;
-    mblk_t *temp_mp;
-    int proto;
-    int len, hlen;
-
-
-    /* Note, the PPP header has already been pulled up in all cases */
-    proto = PPP_PROTOCOL(mp->b_rptr);
-    if (us->flags & US_DBGLOG)
-        DPRINT3("ppp/%d: filter, proto=0x%x, out=%d\n", us->mn, proto, outbound);
-
-    switch (proto)
-    {
-    case PPP_IP:
-	if ((mp->b_wptr - mp->b_rptr) == PPP_HDRLEN && mp->b_cont != 0) {
-	    temp_mp = mp->b_cont;
-    	    len = msgdsize(temp_mp);
-	    hlen = (len < MAX_IPHDR) ? len : MAX_IPHDR;
-	    PULLUP(temp_mp, hlen);
-	    if (temp_mp == 0) {
-		DPRINT2("ppp/%d: filter, pullup next failed, len=%d\n", 
-			us->mn, hlen);
-		mp->b_cont = 0;		/* PULLUP() freed the rest */
-	        freemsg(mp);
-	        return 0;
-	    }
-	    ip = (struct ip *)mp->b_cont->b_rptr;
-	}
-	else {
-	    len = msgdsize(mp);
-	    hlen = (len < (PPP_HDRLEN+MAX_IPHDR)) ? len : (PPP_HDRLEN+MAX_IPHDR);
-	    PULLUP(mp, hlen);
-	    if (mp == 0) {
-		DPRINT2("ppp/%d: filter, pullup failed, len=%d\n", 
-			us->mn, hlen);
-	        return 0;
-	    }
-	    ip = (struct ip *)(mp->b_rptr + PPP_HDRLEN);
-	}
-
-	/* For IP traffic, certain packets (e.g., RIP) may be either
-	 *   1.  ignored - dropped completely
-	 *   2.  will not initiate a connection, but
-	 *       will be passed if a connection is currently up.
-	 */
-	for (pft=pktfilt_tab; pft->proto != -1; pft++) {
-	    if (ip->ip_p == pft->proto) {
-		switch(pft->proto) {
-		case IPPROTO_UDP:
-		    if (((struct udphdr *) &((int *)ip)[ip->ip_hl])->uh_dport
-				== htons(pft->port)) goto endfor;
-		    break;
-		case IPPROTO_TCP:
-		    if (((struct tcphdr *) &((int *)ip)[ip->ip_hl])->th_dport
-				== htons(pft->port)) goto endfor;
-		    break;
-		}	
-	    }
-	}
-	endfor:
-	if (pft->proto != -1) {
-	    if (us->flags & US_DBGLOG)
-		DPRINT3("ppp/%d: found IP pkt, proto=0x%x (%d)\n", 
-				us->mn, pft->proto, pft->port);
-	    /* Discard if not connected, or if not pass_with_link_up */
-	    /* else, if link is up let go by, but don't update time */
-	    return pft->ok_if_link_up? -1: 0;
-	}
-        break;
-    } /* end switch (proto) */
-
-    return 1;
-}
-#endif /* FILTER_PACKETS */
-
diff --git a/mdk-stage1/ppp/solaris/ppp.conf b/mdk-stage1/ppp/solaris/ppp.conf
deleted file mode 100644
index e443a7aac..000000000
--- a/mdk-stage1/ppp/solaris/ppp.conf
+++ /dev/null
@@ -1 +0,0 @@
-name="ppp" parent="pseudo" instance=0;
diff --git a/mdk-stage1/ppp/solaris/ppp_ahdlc.c b/mdk-stage1/ppp/solaris/ppp_ahdlc.c
deleted file mode 100644
index d0b961258..000000000
--- a/mdk-stage1/ppp/solaris/ppp_ahdlc.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * ppp_ahdlc.c - STREAMS module for doing PPP asynchronous HDLC.
- *
- * Re-written by Adi Masputra <adi.masputra@sun.com>, based on 
- * the original ppp_ahdlc.c
- *
- * Copyright (c) 2000 by Sun Microsystems, Inc.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  
- *
- * SUN MAKES NO REPRESENTATION OR WARRANTIES ABOUT THE SUITABILITY OF
- * THE SOFTWARE, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
- * TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
- * PARTICULAR PURPOSE, OR NON-INFRINGEMENT.  SUN SHALL NOT BE LIABLE FOR
- * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
- * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2, SVR4, SunOS 4, and Digital UNIX.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stream.h>
-#include <sys/errno.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/kmem.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-/*
- * Right now, mutex is only enabled for Solaris 2.x
- */
-#if defined(SOL2)
-#define USE_MUTEX
-#endif /* SOL2 */
-
-/*
- * intpointer_t and uintpointer_t are signed and unsigned integer types 
- * large enough to hold any data pointer; that is, data pointers can be 
- * assigned into or from these integer types without losing precision.
- * On recent Solaris releases, these types are defined in sys/int_types.h,
- * but not on SunOS 4.x or the earlier Solaris versions.
- */
-#if defined(_LP64) || defined(_I32LPx)
-typedef long                    intpointer_t;
-typedef unsigned long           uintpointer_t;
-#else
-typedef int                     intpointer_t;
-typedef unsigned int            uintpointer_t;
-#endif
-
-MOD_OPEN_DECL(ahdlc_open);
-MOD_CLOSE_DECL(ahdlc_close);
-static int ahdlc_wput __P((queue_t *, mblk_t *));
-static int ahdlc_rput __P((queue_t *, mblk_t *));
-static void ahdlc_encode __P((queue_t *, mblk_t *));
-static void ahdlc_decode __P((queue_t *, mblk_t *));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-#if defined(SOL2)
-/*
- * Don't send HDLC start flag is last transmit is within 1.5 seconds -
- * FLAG_TIME is defined is microseconds
- */
-#define FLAG_TIME   1500
-#define ABS(x)	    (x >= 0 ? x : (-x))
-#endif /* SOL2 */
-
-/*
- * Extract byte i of message mp 
- */
-#define MSG_BYTE(mp, i)	((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
-			 msg_byte((mp), (i)))
-
-/* 
- * Is this LCP packet one we have to transmit using LCP defaults? 
- */
-#define LCP_USE_DFLT(mp)	(1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-/*
- * Standard STREAMS declarations
- */
-static struct module_info minfo = {
-    0x7d23, "ppp_ahdl", 0, INFPSZ, 32768, 512
-};
-
-static struct qinit rinit = {
-    ahdlc_rput, NULL, ahdlc_open, ahdlc_close, NULL, &minfo, NULL
-};
-
-static struct qinit winit = {
-    ahdlc_wput, NULL, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int phdldevflag = 0;
-#define ppp_ahdlcinfo phdlinfo
-#endif /* defined(SVR4) && !defined(SOL2) */
-
-struct streamtab ppp_ahdlcinfo = {
-    &rinit,			    /* ptr to st_rdinit */
-    &winit,			    /* ptr to st_wrinit */
-    NULL,			    /* ptr to st_muxrinit */
-    NULL,			    /* ptr to st_muxwinit */
-#if defined(SUNOS4)
-    NULL			    /* ptr to ptr to st_modlist */
-#endif /* SUNOS4 */
-};
-
-#if defined(SUNOS4)
-int ppp_ahdlc_count = 0;	    /* open counter */
-#endif /* SUNOS4 */
-
-/*
- * Per-stream state structure
- */
-typedef struct ahdlc_state {
-#if defined(USE_MUTEX)
-    kmutex_t	    lock;		    /* lock for this structure */
-#endif /* USE_MUTEX */
-    int		    flags;		    /* link flags */
-    mblk_t	    *rx_buf;		    /* ptr to receive buffer */
-    int		    rx_buf_size;	    /* receive buffer size */
-    ushort_t	    infcs;		    /* calculated rx HDLC FCS */
-    u_int32_t	    xaccm[8];		    /* 256-bit xmit ACCM */
-    u_int32_t	    raccm;		    /* 32-bit rcv ACCM */
-    int		    mtu;		    /* interface MTU */
-    int		    mru;		    /* link MRU */
-    int		    unit;		    /* current PPP unit number */
-    struct pppstat  stats;		    /* statistic structure */
-#if defined(SOL2)
-    clock_t	    flag_time;		    /* time in usec between flags */
-    clock_t	    lbolt;		    /* last updated lbolt */
-#endif /* SOL2 */
-} ahdlc_state_t;
-
-/*
- * Values for flags 
- */
-#define ESCAPED		0x100	/* last saw escape char on input */
-#define IFLUSH		0x200	/* flushing input due to error */
-
-/* 
- * RCV_B7_1, etc., defined in net/pppio.h, are stored in flags also. 
- */
-#define RCV_FLAGS	(RCV_B7_1|RCV_B7_0|RCV_ODDP|RCV_EVNP)
-
-/*
- * FCS lookup table as calculated by genfcstab.
- */
-static u_short fcstab[256] = {
-	0x0000,	0x1189,	0x2312,	0x329b,	0x4624,	0x57ad,	0x6536,	0x74bf,
-	0x8c48,	0x9dc1,	0xaf5a,	0xbed3,	0xca6c,	0xdbe5,	0xe97e,	0xf8f7,
-	0x1081,	0x0108,	0x3393,	0x221a,	0x56a5,	0x472c,	0x75b7,	0x643e,
-	0x9cc9,	0x8d40,	0xbfdb,	0xae52,	0xdaed,	0xcb64,	0xf9ff,	0xe876,
-	0x2102,	0x308b,	0x0210,	0x1399,	0x6726,	0x76af,	0x4434,	0x55bd,
-	0xad4a,	0xbcc3,	0x8e58,	0x9fd1,	0xeb6e,	0xfae7,	0xc87c,	0xd9f5,
-	0x3183,	0x200a,	0x1291,	0x0318,	0x77a7,	0x662e,	0x54b5,	0x453c,
-	0xbdcb,	0xac42,	0x9ed9,	0x8f50,	0xfbef,	0xea66,	0xd8fd,	0xc974,
-	0x4204,	0x538d,	0x6116,	0x709f,	0x0420,	0x15a9,	0x2732,	0x36bb,
-	0xce4c,	0xdfc5,	0xed5e,	0xfcd7,	0x8868,	0x99e1,	0xab7a,	0xbaf3,
-	0x5285,	0x430c,	0x7197,	0x601e,	0x14a1,	0x0528,	0x37b3,	0x263a,
-	0xdecd,	0xcf44,	0xfddf,	0xec56,	0x98e9,	0x8960,	0xbbfb,	0xaa72,
-	0x6306,	0x728f,	0x4014,	0x519d,	0x2522,	0x34ab,	0x0630,	0x17b9,
-	0xef4e,	0xfec7,	0xcc5c,	0xddd5,	0xa96a,	0xb8e3,	0x8a78,	0x9bf1,
-	0x7387,	0x620e,	0x5095,	0x411c,	0x35a3,	0x242a,	0x16b1,	0x0738,
-	0xffcf,	0xee46,	0xdcdd,	0xcd54,	0xb9eb,	0xa862,	0x9af9,	0x8b70,
-	0x8408,	0x9581,	0xa71a,	0xb693,	0xc22c,	0xd3a5,	0xe13e,	0xf0b7,
-	0x0840,	0x19c9,	0x2b52,	0x3adb,	0x4e64,	0x5fed,	0x6d76,	0x7cff,
-	0x9489,	0x8500,	0xb79b,	0xa612,	0xd2ad,	0xc324,	0xf1bf,	0xe036,
-	0x18c1,	0x0948,	0x3bd3,	0x2a5a,	0x5ee5,	0x4f6c,	0x7df7,	0x6c7e,
-	0xa50a,	0xb483,	0x8618,	0x9791,	0xe32e,	0xf2a7,	0xc03c,	0xd1b5,
-	0x2942,	0x38cb,	0x0a50,	0x1bd9,	0x6f66,	0x7eef,	0x4c74,	0x5dfd,
-	0xb58b,	0xa402,	0x9699,	0x8710,	0xf3af,	0xe226,	0xd0bd,	0xc134,
-	0x39c3,	0x284a,	0x1ad1,	0x0b58,	0x7fe7,	0x6e6e,	0x5cf5,	0x4d7c,
-	0xc60c,	0xd785,	0xe51e,	0xf497,	0x8028,	0x91a1,	0xa33a,	0xb2b3,
-	0x4a44,	0x5bcd,	0x6956,	0x78df,	0x0c60,	0x1de9,	0x2f72,	0x3efb,
-	0xd68d,	0xc704,	0xf59f,	0xe416,	0x90a9,	0x8120,	0xb3bb,	0xa232,
-	0x5ac5,	0x4b4c,	0x79d7,	0x685e,	0x1ce1,	0x0d68,	0x3ff3,	0x2e7a,
-	0xe70e,	0xf687,	0xc41c,	0xd595,	0xa12a,	0xb0a3,	0x8238,	0x93b1,
-	0x6b46,	0x7acf,	0x4854,	0x59dd,	0x2d62,	0x3ceb,	0x0e70,	0x1ff9,
-	0xf78f,	0xe606,	0xd49d,	0xc514,	0xb1ab,	0xa022,	0x92b9,	0x8330,
-	0x7bc7,	0x6a4e,	0x58d5,	0x495c,	0x3de3,	0x2c6a,	0x1ef1,	0x0f78
-};
-
-static u_int32_t paritytab[8] =
-{
-	0x96696996, 0x69969669, 0x69969669, 0x96696996,
-	0x69969669, 0x96696996, 0x96696996, 0x69969669
-};
-
-/*
- * STREAMS module open (entry) point
- */
-MOD_OPEN(ahdlc_open)
-{
-    ahdlc_state_t   *state;
-
-    /*
-     * Return if it's already opened
-     */
-    if (q->q_ptr) {
-	return 0;
-    }
-
-    /*
-     * This can only be opened as a module
-     */
-    if (sflag != MODOPEN) {
-	return 0;
-    }
-
-    state = (ahdlc_state_t *) ALLOC_NOSLEEP(sizeof(ahdlc_state_t));
-    if (state == 0)
-	OPEN_ERROR(ENOSR);
-    bzero((caddr_t) state, sizeof(ahdlc_state_t));
-
-    q->q_ptr	 = (caddr_t) state;
-    WR(q)->q_ptr = (caddr_t) state;
-
-#if defined(USE_MUTEX)
-    mutex_init(&state->lock, NULL, MUTEX_DEFAULT, NULL);
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    state->xaccm[0] = ~0;	    /* escape 0x00 through 0x1f */
-    state->xaccm[3] = 0x60000000;   /* escape 0x7d and 0x7e */
-    state->mru	    = PPP_MRU;	    /* default of 1500 bytes */
-#if defined(SOL2)
-    state->flag_time = drv_usectohz(FLAG_TIME);
-#endif /* SOL2 */
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */	
-
-#if defined(SUNOS4)
-    ppp_ahdlc_count++;
-#endif /* SUNOS4 */
-
-    qprocson(q);
-    
-    return 0;
-}
-
-/*
- * STREAMS module close (exit) point
- */
-MOD_CLOSE(ahdlc_close)
-{
-    ahdlc_state_t   *state;
-
-    qprocsoff(q);
-
-    state = (ahdlc_state_t *) q->q_ptr;
-
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_close\n");
-	return 0;
-    }
-
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    if (state->rx_buf != 0) {
-	freemsg(state->rx_buf);
-	state->rx_buf = 0;
-    }
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-    mutex_destroy(&state->lock);
-#endif /* USE_MUTEX */
-
-    FREE(q->q_ptr, sizeof(ahdlc_state_t));
-    q->q_ptr	     = NULL;
-    OTHERQ(q)->q_ptr = NULL;
-
-#if defined(SUNOS4)
-    if (ppp_ahdlc_count)
-	ppp_ahdlc_count--;
-#endif /* SUNOS4 */
-    
-    return 0;
-}
-
-/*
- * Write side put routine
- */
-static int
-ahdlc_wput(q, mp)
-    queue_t	*q;
-    mblk_t	*mp;
-{
-    ahdlc_state_t  	*state;
-    struct iocblk  	*iop;
-    int		   	error;
-    mblk_t	   	*np;
-    struct ppp_stats	*psp;
-
-    state = (ahdlc_state_t *) q->q_ptr;
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_wput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	/*
-	 * A data packet - do character-stuffing and FCS, and
-	 * send it onwards.
-	 */
-	ahdlc_encode(q, mp);
-	freemsg(mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	switch (iop->ioc_cmd) {
-	case PPPIO_XACCM:
-	    if ((iop->ioc_count < sizeof(u_int32_t)) || 
-		(iop->ioc_count > sizeof(ext_accm))) {
-		break;
-	    }
-	    if (mp->b_cont == 0) {
-		DPRINT1("ahdlc_wput/%d: PPPIO_XACCM b_cont = 0!\n", state->unit);
-		break;
-	    }
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)state->xaccm,
-		  iop->ioc_count);
-	    state->xaccm[2] &= ~0x40000000;	/* don't escape 0x5e */
-	    state->xaccm[3] |= 0x60000000;	/* do escape 0x7d, 0x7e */
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_RACCM:
-	    if (iop->ioc_count != sizeof(u_int32_t))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ahdlc_wput/%d: PPPIO_RACCM b_cont = 0!\n", state->unit);
-		break;
-	    }
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    bcopy((caddr_t)mp->b_cont->b_rptr, (caddr_t)&state->raccm,
-		  sizeof(u_int32_t));
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    iop->ioc_count = 0;
-	    error = 0;
-	    break;
-
-	case PPPIO_GCLEAN:
-	    np = allocb(sizeof(int), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    *(int *)np->b_wptr = state->flags & RCV_FLAGS;
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    np->b_wptr += sizeof(int);
-	    iop->ioc_count = sizeof(int);
-	    error = 0;
-	    break;
-
-	case PPPIO_GETSTAT:
-	    np = allocb(sizeof(struct ppp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    psp = (struct ppp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_stats);
-	    bzero((caddr_t)psp, sizeof(struct ppp_stats));
-	    psp->p = state->stats;
-	    iop->ioc_count = sizeof(struct ppp_stats);
-	    error = 0;
-	    break;
-
-	case PPPIO_LASTMOD:
-	    /* we knew this anyway */
-	    error = 0;
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_count = 0;
-	    iop->ioc_error = error;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_CTL:
-	switch (*mp->b_rptr) {
-	case PPPCTL_MTU:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->mtu = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    freemsg(mp);
-	    break;
-	case PPPCTL_MRU:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->mru = ((unsigned short *)mp->b_rptr)[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    freemsg(mp);
-	    break;
-	case PPPCTL_UNIT:
-#if defined(USE_MUTEX)
-	    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	    state->unit = mp->b_rptr[1];
-#if defined(USE_MUTEX)
-	    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	    break;
-	default:
-	    putnext(q, mp);
-	}
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-/*
- * Read side put routine
- */
-static int
-ahdlc_rput(q, mp)
-    queue_t *q;
-    mblk_t  *mp;
-{
-    ahdlc_state_t *state;
-
-    state = (ahdlc_state_t *) q->q_ptr;
-    if (state == 0) {
-	DPRINT("state == 0 in ahdlc_rput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-    case M_DATA:
-	ahdlc_decode(q, mp);
-	freemsg(mp);
-	break;
-
-    case M_HANGUP:
-#if defined(USE_MUTEX)
-	mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-	if (state->rx_buf != 0) {
-	    /* XXX would like to send this up for debugging */
-	    freemsg(state->rx_buf);
-	    state->rx_buf = 0;
-	}
-	state->flags = IFLUSH;
-#if defined(USE_MUTEX)
-	mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-    return 0;
-}
-
-/*
- * Extract bit c from map m, to determine if c needs to be escaped
- */
-#define IN_TX_MAP(c, m)	((m)[(c) >> 5] & (1 << ((c) & 0x1f)))
-
-static void
-ahdlc_encode(q, mp)
-    queue_t	*q;
-    mblk_t	*mp;
-{
-    ahdlc_state_t	*state;
-    u_int32_t		*xaccm, loc_xaccm[8];
-    ushort_t		fcs;
-    size_t		outmp_len;
-    mblk_t		*outmp, *tmp;
-    uchar_t		*dp, fcs_val;
-    int			is_lcp, code;
-#if defined(SOL2)
-    clock_t		lbolt;
-#endif /* SOL2 */
-
-    if (msgdsize(mp) < 4) {
-	return;
-    }
-
-    state = (ahdlc_state_t *)q->q_ptr;
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    /*
-     * Allocate an output buffer large enough to handle a case where all
-     * characters need to be escaped
-     */
-    outmp_len = (msgdsize(mp)	 << 1) +		/* input block x 2 */
-		(sizeof(fcs)	 << 2) +		/* HDLC FCS x 4 */
-		(sizeof(uchar_t) << 1);			/* HDLC flags x 2 */
-
-    outmp = allocb(outmp_len, BPRI_MED);
-    if (outmp == NULL) {
-	state->stats.ppp_oerrors++;
-#if defined(USE_MUTEX)
-	mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-	putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-	return;
-    }
-
-#if defined(SOL2)
-    /*
-     * Check if our last transmit happenned within flag_time, using
-     * the system's LBOLT value in clock ticks
-     */
-    if (drv_getparm(LBOLT, &lbolt) != -1) {
-	if (ABS((clock_t)lbolt - state->lbolt) > state->flag_time) {
-	    *outmp->b_wptr++ = PPP_FLAG;
-	} 
-	state->lbolt = lbolt;
-    } else {
-	*outmp->b_wptr++ = PPP_FLAG;
-    }
-#else
-    /*
-     * If the driver below still has a message to process, skip the
-     * HDLC flag, otherwise, put one in the beginning
-     */
-    if (qsize(q->q_next) == 0) {
-	*outmp->b_wptr++ = PPP_FLAG;
-    }
-#endif
-
-    /*
-     * All control characters must be escaped for LCP packets with code
-     * values between 1 (Conf-Req) and 7 (Code-Rej).
-     */
-    is_lcp = ((MSG_BYTE(mp, 0) == PPP_ALLSTATIONS) && 
-	      (MSG_BYTE(mp, 1) == PPP_UI) && 
-	      (MSG_BYTE(mp, 2) == (PPP_LCP >> 8)) &&
-	      (MSG_BYTE(mp, 3) == (PPP_LCP & 0xff)) &&
-	      LCP_USE_DFLT(mp));
-
-    xaccm = state->xaccm;
-    if (is_lcp) {
-	bcopy((caddr_t)state->xaccm, (caddr_t)loc_xaccm, sizeof(loc_xaccm));
-	loc_xaccm[0] = ~0;	/* force escape on 0x00 through 0x1f */
-	xaccm = loc_xaccm;
-    }
-
-    fcs = PPP_INITFCS;		/* Initial FCS is 0xffff */
-
-    /*
-     * Process this block and the rest (if any) attached to the this one
-     */
-    for (tmp = mp; tmp; tmp = tmp->b_cont) {
-	if (tmp->b_datap->db_type == M_DATA) {
-	    for (dp = tmp->b_rptr; dp < tmp->b_wptr; dp++) {
-		fcs = PPP_FCS(fcs, *dp);
-		if (IN_TX_MAP(*dp, xaccm)) {
-		    *outmp->b_wptr++ = PPP_ESCAPE;
-		    *outmp->b_wptr++ = *dp ^ PPP_TRANS;
-		} else {
-		    *outmp->b_wptr++ = *dp;
-		}
-	    }
-	} else {
-	    continue;	/* skip if db_type is something other than M_DATA */
-	}
-    }
-
-    /*
-     * Append the HDLC FCS, making sure that escaping is done on any
-     * necessary bytes
-     */
-    fcs_val = (fcs ^ 0xffff) & 0xff;
-    if (IN_TX_MAP(fcs_val, xaccm)) {
-	*outmp->b_wptr++ = PPP_ESCAPE;
-	*outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
-    } else {
-	*outmp->b_wptr++ = fcs_val;
-    }
-
-    fcs_val = ((fcs ^ 0xffff) >> 8) & 0xff;
-    if (IN_TX_MAP(fcs_val, xaccm)) {
-	*outmp->b_wptr++ = PPP_ESCAPE;
-	*outmp->b_wptr++ = fcs_val ^ PPP_TRANS;
-    } else {
-	*outmp->b_wptr++ = fcs_val;
-    }
-
-    /*
-     * And finally, append the HDLC flag, and send it away
-     */
-    *outmp->b_wptr++ = PPP_FLAG;
-
-    state->stats.ppp_obytes += msgdsize(outmp);
-    state->stats.ppp_opackets++;
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-
-    putnext(q, outmp);
-    return;
-}
-
-/*
- * Checks the 32-bit receive ACCM to see if the byte needs un-escaping
- */
-#define IN_RX_MAP(c, m)	((((unsigned int) (uchar_t) (c)) < 0x20) && \
-			(m) & (1 << (c)))
-
-
-/*
- * Process received characters.
- */
-static void
-ahdlc_decode(q, mp)
-    queue_t *q;
-    mblk_t  *mp;
-{
-    ahdlc_state_t   *state;
-    mblk_t	    *om;
-    uchar_t	    *dp;
-    ushort_t	    fcs;
-#if defined(SOL2)
-    mblk_t	    *zmp;
-#endif /* SOL2 */
-
-#if defined(SOL2)
-    /*
-     * In case the driver (or something below) doesn't send
-     * data upstream in one message block, concatenate everything
-     */
-    if (!((mp->b_wptr - mp->b_rptr == msgdsize(mp)) && 
-         ((intpointer_t)mp->b_rptr % sizeof(intpointer_t) == 0))) {
-
-	zmp = msgpullup(mp, -1);
-	freemsg(mp);
-	mp = zmp;
-	if (mp == 0)
-	    return; 
-    }
-#endif /* SOL2 */
-
-    state = (ahdlc_state_t *) q->q_ptr;
-
-#if defined(USE_MUTEX)
-    mutex_enter(&state->lock);
-#endif /* USE_MUTEX */
-
-    state->stats.ppp_ibytes += msgdsize(mp);
-
-    for (dp = mp->b_rptr; dp < mp->b_wptr; dp++) {
-
-	/*
-	 * This should detect the lack of 8-bit communication channel
-	 * which is necessary for PPP to work. In addition, it also
-	 * checks on the parity.
-	 */
-	if (*dp & 0x80)
-	    state->flags |= RCV_B7_1;
-	else
-	    state->flags |= RCV_B7_0;
-
-	if (paritytab[*dp >> 5] & (1 << (*dp & 0x1f)))
-	    state->flags |= RCV_ODDP;
-	else
-	    state->flags |= RCV_EVNP;
-
-	/*
-	 * So we have a HDLC flag ...
-	 */
-	if (*dp == PPP_FLAG) {
-
-	    /*
-	     * If we think that it marks the beginning of the frame,
-	     * then continue to process the next octects
-	     */
-	    if ((state->flags & IFLUSH) ||
-		(state->rx_buf == 0) ||
-		(msgdsize(state->rx_buf) == 0)) {
-
-		state->flags &= ~IFLUSH;
-		continue;
-	    }
-
-	    /*
-	     * We get here because the above condition isn't true,
-	     * in which case the HDLC flag was there to mark the end
-	     * of the frame (or so we think)
-	     */
-	    om = state->rx_buf;
-
-	    if (state->infcs == PPP_GOODFCS) {
-		state->stats.ppp_ipackets++;
-		adjmsg(om, -PPP_FCSLEN);
-		putnext(q, om);
-	    } else {
-		DPRINT2("ppp%d: bad fcs (len=%d)\n",
-                    state->unit, msgdsize(state->rx_buf));
-		freemsg(state->rx_buf);
-		state->flags &= ~(IFLUSH | ESCAPED);
-		state->stats.ppp_ierrors++;
-		putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-	    }
-
-	    state->rx_buf = 0;
-	    continue;
-	}
-
-	if (state->flags & IFLUSH) {
-	    continue;
-	}
-
-	/*
-	 * Allocate a receive buffer, large enough to store a frame (after
-	 * un-escaping) of at least 1500 octets. If MRU is negotiated to
-	 * be more than the default, then allocate that much. In addition,
-	 * we add an extra 32-bytes for a fudge factor
-	 */ 
-	if (state->rx_buf == 0) {
-	    state->rx_buf_size  = (state->mru < PPP_MRU ? PPP_MRU : state->mru);
-	    state->rx_buf_size += (sizeof(u_int32_t) << 3);
-	    state->rx_buf = allocb(state->rx_buf_size, BPRI_MED);
-
-	    /*
-	     * If allocation fails, try again on the next frame
-	     */
-	    if (state->rx_buf == 0) {
-		state->flags |= IFLUSH;
-		continue;
-	    }
-	    state->flags &= ~(IFLUSH | ESCAPED);
-	    state->infcs  = PPP_INITFCS;
-	}
-
-	if (*dp == PPP_ESCAPE) {
-	    state->flags |= ESCAPED;
-	    continue;
-	}
-
-	/*
-	 * Make sure we un-escape the necessary characters, as well as the
-	 * ones in our receive async control character map
-	 */
-	if (state->flags & ESCAPED) {
-	    *dp ^= PPP_TRANS;
-	    state->flags &= ~ESCAPED;
-	} else if (IN_RX_MAP(*dp, state->raccm)) 
-	    continue;
-
-	/*
-	 * Unless the peer lied to us about the negotiated MRU, we should
-	 * never get a frame which is too long. If it happens, toss it away
-	 * and grab the next incoming one
-	 */
-	if (msgdsize(state->rx_buf) < state->rx_buf_size) {
-	    state->infcs = PPP_FCS(state->infcs, *dp);
-	    *state->rx_buf->b_wptr++ = *dp;
-	} else {
-	    DPRINT2("ppp%d: frame too long (%d)\n",
-		state->unit, msgdsize(state->rx_buf));
-	    freemsg(state->rx_buf);
-	    state->rx_buf     = 0;
-	    state->flags     |= IFLUSH;
-	}
-    }
-
-#if defined(USE_MUTEX)
-    mutex_exit(&state->lock);
-#endif /* USE_MUTEX */
-}
-
-static int
-msg_byte(mp, i)
-    mblk_t *mp;
-    unsigned int i;
-{
-    while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
-	mp = mp->b_cont;
-    if (mp == 0)
-	return -1;
-    return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c b/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c
deleted file mode 100644
index f81be8abb..000000000
--- a/mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-
-static struct fmodsw fsw = {
-    "ppp_ahdl",
-    &ppp_ahdlcinfo,
-    D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
-    &mod_strmodops,
-    "PPP async HDLC module",
-    &fsw
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modlstrmod,
-    NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_comp.c b/mdk-stage1/ppp/solaris/ppp_comp.c
deleted file mode 100644
index f6eef5ab1..000000000
--- a/mdk-stage1/ppp/solaris/ppp_comp.c
+++ /dev/null
@@ -1,1126 +0,0 @@
-/*
- * ppp_comp.c - STREAMS module for kernel-level compression and CCP support.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under SVR4, Solaris 2, SunOS 4, and Digital UNIX.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/errno.h>
-#include <sys/stream.h>
-
-#ifdef SVR4
-#include <sys/conf.h>
-#include <sys/cmn_err.h>
-#include <sys/ddi.h>
-#else
-#include <sys/user.h>
-#ifdef __osf__
-#include <sys/cmn_err.h>
-#endif
-#endif /* SVR4 */
-
-#include <net/ppp_defs.h>
-#include <net/pppio.h>
-#include "ppp_mod.h"
-
-#ifdef __osf__
-#include <sys/mbuf.h>
-#include <sys/protosw.h>
-#endif
-
-#include <netinet/in.h>
-#include <netinet/in_systm.h>
-#include <netinet/ip.h>
-#include <net/vjcompress.h>
-
-#define PACKETPTR	mblk_t *
-#include <net/ppp-comp.h>
-
-MOD_OPEN_DECL(ppp_comp_open);
-MOD_CLOSE_DECL(ppp_comp_close);
-static int ppp_comp_rput __P((queue_t *, mblk_t *));
-static int ppp_comp_rsrv __P((queue_t *));
-static int ppp_comp_wput __P((queue_t *, mblk_t *));
-static int ppp_comp_wsrv __P((queue_t *));
-static void ppp_comp_ccp __P((queue_t *, mblk_t *, int));
-static int msg_byte __P((mblk_t *, unsigned int));
-
-/* Extract byte i of message mp. */
-#define MSG_BYTE(mp, i)	((i) < (mp)->b_wptr - (mp)->b_rptr? (mp)->b_rptr[i]: \
-			 msg_byte((mp), (i)))
-
-/* Is this LCP packet one we have to transmit using LCP defaults? */
-#define LCP_USE_DFLT(mp)	(1 <= (code = MSG_BYTE((mp), 4)) && code <= 7)
-
-#define PPP_COMP_ID 0xbadf
-static struct module_info minfo = {
-#ifdef PRIOQ
-    PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16512, 16384,
-#else
-    PPP_COMP_ID, "ppp_comp", 0, INFPSZ, 16384, 4096,
-#endif
-};
-
-static struct qinit r_init = {
-    ppp_comp_rput, ppp_comp_rsrv, ppp_comp_open, ppp_comp_close,
-    NULL, &minfo, NULL
-};
-
-static struct qinit w_init = {
-    ppp_comp_wput, ppp_comp_wsrv, NULL, NULL, NULL, &minfo, NULL
-};
-
-#if defined(SVR4) && !defined(SOL2)
-int pcmpdevflag = 0;
-#define ppp_compinfo pcmpinfo
-#endif
-struct streamtab ppp_compinfo = {
-    &r_init, &w_init, NULL, NULL
-};
-
-int ppp_comp_count;		/* number of module instances in use */
-
-#ifdef __osf__
-
-static void ppp_comp_alloc __P((comp_state_t *));
-typedef struct memreq {
-    unsigned char comp_opts[20];
-    int cmd;
-    int thread_status;
-    char *returned_mem;
-} memreq_t;
-
-#endif
-
-typedef struct comp_state {
-    int		flags;
-    int		mru;
-    int		mtu;
-    int		unit;
-    struct compressor *xcomp;
-    void	*xstate;
-    struct compressor *rcomp;
-    void	*rstate;
-    struct vjcompress vj_comp;
-    int		vj_last_ierrors;
-    struct pppstat stats;
-#ifdef __osf__
-    memreq_t	memreq;
-    thread_t	thread;
-#endif
-} comp_state_t;
-
-
-#ifdef __osf__
-extern task_t first_task;
-#endif
-
-/* Bits in flags are as defined in pppio.h. */
-#define CCP_ERR		(CCP_ERROR | CCP_FATALERROR)
-#define LAST_MOD	0x1000000	/* no ppp modules below us */
-#define DBGLOG		0x2000000	/* log debugging stuff */
-
-#define MAX_IPHDR	128	/* max TCP/IP header size */
-#define MAX_VJHDR	20	/* max VJ compressed header size (?) */
-
-#undef MIN		/* just in case */
-#define MIN(a, b)	((a) < (b)? (a): (b))
-
-/*
- * List of compressors we know about.
- */
-
-#if DO_BSD_COMPRESS
-extern struct compressor ppp_bsd_compress;
-#endif
-#if DO_DEFLATE
-extern struct compressor ppp_deflate, ppp_deflate_draft;
-#endif
-
-struct compressor *ppp_compressors[] = {
-#if DO_BSD_COMPRESS
-    &ppp_bsd_compress,
-#endif
-#if DO_DEFLATE
-    &ppp_deflate,
-    &ppp_deflate_draft,
-#endif
-    NULL
-};
-
-/*
- * STREAMS module entry points.
- */
-MOD_OPEN(ppp_comp_open)
-{
-    comp_state_t *cp;
-#ifdef __osf__
-    thread_t thread;
-#endif
-
-    if (q->q_ptr == NULL) {
-	cp = (comp_state_t *) ALLOC_SLEEP(sizeof(comp_state_t));
-	if (cp == NULL)
-	    OPEN_ERROR(ENOSR);
-	bzero((caddr_t)cp, sizeof(comp_state_t));
-	WR(q)->q_ptr = q->q_ptr = (caddr_t) cp;
-	cp->mru = PPP_MRU;
-	cp->mtu = PPP_MTU;
-	cp->xstate = NULL;
-	cp->rstate = NULL;
-	vj_compress_init(&cp->vj_comp, -1);
-#ifdef __osf__
-	if (!(thread = kernel_thread_w_arg(first_task, ppp_comp_alloc, (void *)cp)))
-		OPEN_ERROR(ENOSR);
-	cp->thread = thread;
-#endif
-	++ppp_comp_count;
-	qprocson(q);
-    }
-    return 0;
-}
-
-MOD_CLOSE(ppp_comp_close)
-{
-    comp_state_t *cp;
-
-    qprocsoff(q);
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp != NULL) {
-	if (cp->xstate != NULL)
-	    (*cp->xcomp->comp_free)(cp->xstate);
-	if (cp->rstate != NULL)
-	    (*cp->rcomp->decomp_free)(cp->rstate);
-#ifdef __osf__
-	if (!cp->thread)
-	    printf("ppp_comp_close: NULL thread!\n");
-	else
-	    thread_terminate(cp->thread);
-#endif
-	FREE(cp, sizeof(comp_state_t));
-	q->q_ptr = NULL;
-	OTHERQ(q)->q_ptr = NULL;
-	--ppp_comp_count;
-    }
-    return 0;
-}
-
-#ifdef __osf__
-
-/* thread for calling back to a compressor's memory allocator
- * Needed for Digital UNIX since it's VM can't handle requests
- * for large amounts of memory without blocking.  The thread
- * provides a context in which we can call a memory allocator
- * that may block.
- */
-static void
-ppp_comp_alloc(comp_state_t *cp)
-{
-    int len, cmd;
-    unsigned char *compressor_options;
-    thread_t thread;
-    void *(*comp_allocator)();
-
-
-#if defined(MAJOR_VERSION) && (MAJOR_VERSION <= 2)
-
-    /* In 2.x and earlier the argument gets passed
-     * in the thread structure itself.  Yuck.
-     */
-    thread = current_thread();
-    cp = thread->reply_port;
-    thread->reply_port = PORT_NULL;
-
-#endif
-
-    for (;;) {
-	assert_wait((vm_offset_t)&cp->memreq.thread_status, TRUE);
-	thread_block();
-
-	if (thread_should_halt(current_thread()))
-	    thread_halt_self();
-	cmd = cp->memreq.cmd;
-	compressor_options = &cp->memreq.comp_opts[0];
-	len = compressor_options[1];
-	if (cmd == PPPIO_XCOMP) {
-	    cp->memreq.returned_mem = cp->xcomp->comp_alloc(compressor_options, len);
-	    if (!cp->memreq.returned_mem) {
-		cp->memreq.thread_status = ENOSR;
-	    } else {
-		cp->memreq.thread_status = 0;
-	    }
-	} else {
-	    cp->memreq.returned_mem = cp->rcomp->decomp_alloc(compressor_options, len);
-	    if (!cp->memreq.returned_mem) {
-	        cp->memreq.thread_status = ENOSR;
-	    } else {
-		cp->memreq.thread_status = 0;
-	    }
-	}
-    }
-}
-
-#endif /* __osf__ */
-
-/* here's the deal with memory allocation under Digital UNIX.
- * Some other may also benefit from this...
- * We can't ask for huge chunks of memory in a context where
- * the caller can't be put to sleep (like, here.)  The alloc
- * is likely to fail.  Instead we do this: the first time we
- * get called, kick off a thread to do the allocation.  Return
- * immediately to the caller with EAGAIN, as an indication that
- * they should send down the ioctl again.  By the time the
- * second call comes in it's likely that the memory allocation
- * thread will have returned with the requested memory.  We will
- * continue to return EAGAIN however until the thread has completed.
- * When it has, we return zero (and the memory) if the allocator
- * was successful and ENOSR otherwise.
- *
- * Callers of the RCOMP and XCOMP ioctls are encouraged (but not
- * required) to loop for some number of iterations with a small
- * delay in the loop body (for instance a 1/10-th second "sleep"
- * via select.)
- */
-static int
-ppp_comp_wput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    struct iocblk *iop;
-    comp_state_t *cp;
-    int error, len, n;
-    int flags, mask;
-    mblk_t *np;
-    struct compressor **comp;
-    struct ppp_stats *psp;
-    struct ppp_comp_stats *csp;
-    unsigned char *opt_data;
-    int nxslots, nrslots;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_wput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-
-    case M_DATA:
-	putq(q, mp);
-	break;
-
-    case M_IOCTL:
-	iop = (struct iocblk *) mp->b_rptr;
-	error = EINVAL;
-	switch (iop->ioc_cmd) {
-
-	case PPPIO_CFLAGS:
-	    /* set/get CCP state */
-	    if (iop->ioc_count != 2 * sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_CFLAGS b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    flags = ((int *) mp->b_cont->b_rptr)[0];
-	    mask = ((int *) mp->b_cont->b_rptr)[1];
-	    cp->flags = (cp->flags & ~mask) | (flags & mask);
-	    if ((mask & CCP_ISOPEN) && (flags & CCP_ISOPEN) == 0) {
-		if (cp->xstate != NULL) {
-		    (*cp->xcomp->comp_free)(cp->xstate);
-		    cp->xstate = NULL;
-		}
-		if (cp->rstate != NULL) {
-		    (*cp->rcomp->decomp_free)(cp->rstate);
-		    cp->rstate = NULL;
-		}
-		cp->flags &= ~CCP_ISUP;
-	    }
-	    error = 0;
-	    iop->ioc_count = sizeof(int);
-	    ((int *) mp->b_cont->b_rptr)[0] = cp->flags;
-	    mp->b_cont->b_wptr = mp->b_cont->b_rptr + sizeof(int);
-	    break;
-
-	case PPPIO_VJINIT:
-	    /*
-	     * Initialize VJ compressor/decompressor
-	     */
-	    if (iop->ioc_count != 2)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_VJINIT b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    nxslots = mp->b_cont->b_rptr[0] + 1;
-	    nrslots = mp->b_cont->b_rptr[1] + 1;
-	    if (nxslots > MAX_STATES || nrslots > MAX_STATES)
-		break;
-	    vj_compress_init(&cp->vj_comp, nxslots);
-	    cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-	    error = 0;
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_XCOMP:
-	case PPPIO_RCOMP:
-	    if (iop->ioc_count <= 0)
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_[XR]COMP b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    opt_data = mp->b_cont->b_rptr;
-	    len = mp->b_cont->b_wptr - opt_data;
-	    if (len > iop->ioc_count)
-		len = iop->ioc_count;
-	    if (opt_data[1] < 2 || opt_data[1] > len)
-		break;
-	    for (comp = ppp_compressors; *comp != NULL; ++comp)
-		if ((*comp)->compress_proto == opt_data[0]) {
-		    /* here's the handler! */
-		    error = 0;
-#ifndef __osf__
-		    if (iop->ioc_cmd == PPPIO_XCOMP) {
-			/* A previous call may have fetched memory for a compressor
-			 * that's now being retired or reset.  Free it using it's
-			 * mechanism for freeing stuff.
-			 */
-			if (cp->xstate != NULL) {
-			    (*cp->xcomp->comp_free)(cp->xstate);
-			    cp->xstate = NULL;
-			}
-			cp->xcomp = *comp;
-			cp->xstate = (*comp)->comp_alloc(opt_data, len);
-			if (cp->xstate == NULL)
-			    error = ENOSR;
-		    } else {
-			if (cp->rstate != NULL) {
-			    (*cp->rcomp->decomp_free)(cp->rstate);
-			    cp->rstate = NULL;
-			}
-			cp->rcomp = *comp;
-			cp->rstate = (*comp)->decomp_alloc(opt_data, len);
-			if (cp->rstate == NULL)
-			    error = ENOSR;
-		    }
-#else
-		    if ((error = cp->memreq.thread_status) != EAGAIN)
-		    if (iop->ioc_cmd == PPPIO_XCOMP) {
-			if (cp->xstate) {
-			    (*cp->xcomp->comp_free)(cp->xstate);
-			    cp->xstate = 0;
-			}
-			/* sanity check for compressor options
-			 */
-			if (sizeof (cp->memreq.comp_opts) < len) {
-			    printf("can't handle options for compressor %d (%d)\n", opt_data[0],
-				opt_data[1]);
-			    cp->memreq.thread_status = ENOSR;
-			    cp->memreq.returned_mem = 0;
-			}
-			/* fill in request for the thread and kick it off
-			 */
-			if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
-			    bcopy(opt_data, cp->memreq.comp_opts, len);
-			    cp->memreq.cmd = PPPIO_XCOMP;
-			    cp->xcomp = *comp;
-			    error = cp->memreq.thread_status = EAGAIN;
-			    thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
-			} else {
-			    cp->xstate = cp->memreq.returned_mem;
-			    cp->memreq.returned_mem = 0;
-			    cp->memreq.thread_status = 0;
-			}
-		    } else {
-			if (cp->rstate) {
-			    (*cp->rcomp->decomp_free)(cp->rstate);
-			    cp->rstate = NULL;
-			}
-			if (sizeof (cp->memreq.comp_opts) < len) {
-			    printf("can't handle options for compressor %d (%d)\n", opt_data[0],
-				opt_data[1]);
-			    cp->memreq.thread_status = ENOSR;
-			    cp->memreq.returned_mem = 0;
-			}
-			if (cp->memreq.thread_status == 0 && !cp->memreq.returned_mem) {
-			    bcopy(opt_data, cp->memreq.comp_opts, len);
-			    cp->memreq.cmd = PPPIO_RCOMP;
-			    cp->rcomp = *comp;
-			    error = cp->memreq.thread_status = EAGAIN;
-			    thread_wakeup((vm_offset_t)&cp->memreq.thread_status);
-			} else {
-			    cp->rstate = cp->memreq.returned_mem;
-			    cp->memreq.returned_mem = 0;
-			    cp->memreq.thread_status = 0;
-			}
-		    }
-#endif
-		    break;
-		}
-	    iop->ioc_count = 0;
-	    break;
-
-	case PPPIO_GETSTAT:
-	    if ((cp->flags & LAST_MOD) == 0) {
-		error = -1;	/* let the ppp_ahdl module handle it */
-		break;
-	    }
-	    np = allocb(sizeof(struct ppp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    psp = (struct ppp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_stats);
-	    iop->ioc_count = sizeof(struct ppp_stats);
-	    psp->p = cp->stats;
-	    psp->vj = cp->vj_comp.stats;
-	    error = 0;
-	    break;
-
-	case PPPIO_GETCSTAT:
-	    np = allocb(sizeof(struct ppp_comp_stats), BPRI_HI);
-	    if (np == 0) {
-		error = ENOSR;
-		break;
-	    }
-	    if (mp->b_cont != 0)
-		freemsg(mp->b_cont);
-	    mp->b_cont = np;
-	    csp = (struct ppp_comp_stats *) np->b_wptr;
-	    np->b_wptr += sizeof(struct ppp_comp_stats);
-	    iop->ioc_count = sizeof(struct ppp_comp_stats);
-	    bzero((caddr_t)csp, sizeof(struct ppp_comp_stats));
-	    if (cp->xstate != 0)
-		(*cp->xcomp->comp_stat)(cp->xstate, &csp->c);
-	    if (cp->rstate != 0)
-		(*cp->rcomp->decomp_stat)(cp->rstate, &csp->d);
-	    error = 0;
-	    break;
-
-	case PPPIO_DEBUG:
-	    if (iop->ioc_count != sizeof(int))
-		break;
-	    if (mp->b_cont == 0) {
-		DPRINT1("ppp_comp_wput/%d: PPPIO_DEBUG b_cont = 0!\n", cp->unit);
-		break;
-	    }
-	    n = *(int *)mp->b_cont->b_rptr;
-	    if (n == PPPDBG_LOG + PPPDBG_COMP) {
-		DPRINT1("ppp_comp%d: debug log enabled\n", cp->unit);
-		cp->flags |= DBGLOG;
-		error = 0;
-		iop->ioc_count = 0;
-	    } else {
-		error = -1;
-	    }
-	    break;
-
-	case PPPIO_LASTMOD:
-	    cp->flags |= LAST_MOD;
-	    error = 0;
-	    break;
-
-	default:
-	    error = -1;
-	    break;
-	}
-
-	if (error < 0)
-	    putnext(q, mp);
-	else if (error == 0) {
-	    mp->b_datap->db_type = M_IOCACK;
-	    qreply(q, mp);
-	} else {
-	    mp->b_datap->db_type = M_IOCNAK;
-	    iop->ioc_error = error;
-	    iop->ioc_count = 0;
-	    qreply(q, mp);
-	}
-	break;
-
-    case M_CTL:
-	switch (*mp->b_rptr) {
-	case PPPCTL_MTU:
-	    cp->mtu = ((unsigned short *)mp->b_rptr)[1];
-	    break;
-	case PPPCTL_MRU:
-	    cp->mru = ((unsigned short *)mp->b_rptr)[1];
-	    break;
-	case PPPCTL_UNIT:
-	    cp->unit = mp->b_rptr[1];
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_wsrv(q)
-    queue_t *q;
-{
-    mblk_t *mp, *cmp = NULL;
-    comp_state_t *cp;
-    int len, proto, type, hlen, code;
-    struct ip *ip;
-    unsigned char *vjhdr, *dp;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_wsrv\n");
-	return 0;
-    }
-
-    while ((mp = getq(q)) != 0) {
-	/* assert(mp->b_datap->db_type == M_DATA) */
-#ifdef PRIOQ
-        if (!bcanputnext(q,mp->b_band))
-#else
-        if (!canputnext(q))
-#endif PRIOQ
-	{
-	    putbq(q, mp);
-	    break;
-	}
-
-	/*
-	 * First check the packet length and work out what the protocol is.
-	 */
-	len = msgdsize(mp);
-	if (len < PPP_HDRLEN) {
-	    DPRINT1("ppp_comp_wsrv: bogus short packet (%d)\n", len);
-	    freemsg(mp);
-	    cp->stats.ppp_oerrors++;
-	    putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-	    continue;
-	}
-	proto = (MSG_BYTE(mp, 2) << 8) + MSG_BYTE(mp, 3);
-
-	/*
-	 * Make sure we've got enough data in the first mblk
-	 * and that we are its only user.
-	 */
-	if (proto == PPP_CCP)
-	    hlen = len;
-	else if (proto == PPP_IP)
-	    hlen = PPP_HDRLEN + MAX_IPHDR;
-	else
-	    hlen = PPP_HDRLEN;
-	if (hlen > len)
-	    hlen = len;
-	if (mp->b_wptr < mp->b_rptr + hlen || mp->b_datap->db_ref > 1) {
-	    PULLUP(mp, hlen);
-	    if (mp == 0) {
-		DPRINT1("ppp_comp_wsrv: pullup failed (%d)\n", hlen);
-		cp->stats.ppp_oerrors++;
-		putctl1(RD(q)->q_next, M_CTL, PPPCTL_OERROR);
-		continue;
-	    }
-	}
-
-	/*
-	 * Do VJ compression if requested.
-	 */
-	if (proto == PPP_IP && (cp->flags & COMP_VJC)) {
-	    ip = (struct ip *) (mp->b_rptr + PPP_HDRLEN);
-	    if (ip->ip_p == IPPROTO_TCP) {
-		type = vj_compress_tcp(ip, len - PPP_HDRLEN, &cp->vj_comp,
-				       (cp->flags & COMP_VJCCID), &vjhdr);
-		switch (type) {
-		case TYPE_UNCOMPRESSED_TCP:
-		    mp->b_rptr[3] = proto = PPP_VJC_UNCOMP;
-		    break;
-		case TYPE_COMPRESSED_TCP:
-		    dp = vjhdr - PPP_HDRLEN;
-		    dp[1] = mp->b_rptr[1]; /* copy control field */
-		    dp[0] = mp->b_rptr[0]; /* copy address field */
-		    dp[2] = 0;		   /* set protocol field */
-		    dp[3] = proto = PPP_VJC_COMP;
-		    mp->b_rptr = dp;
-		    break;
-		}
-	    }
-	}
-
-	/*
-	 * Do packet compression if enabled.
-	 */
-	if (proto == PPP_CCP)
-	    ppp_comp_ccp(q, mp, 0);
-	else if (proto != PPP_LCP && (cp->flags & CCP_COMP_RUN)
-		 && cp->xstate != NULL) {
-	    len = msgdsize(mp);
-	    (*cp->xcomp->compress)(cp->xstate, &cmp, mp, len,
-			(cp->flags & CCP_ISUP? cp->mtu + PPP_HDRLEN: 0));
-	    if (cmp != NULL) {
-#ifdef PRIOQ
-		cmp->b_band=mp->b_band;
-#endif PRIOQ
-		freemsg(mp);
-		mp = cmp;
-	    }
-	}
-
-	/*
-	 * Do address/control and protocol compression if enabled.
-	 */
-	if ((cp->flags & COMP_AC)
-	    && !(proto == PPP_LCP && LCP_USE_DFLT(mp))) {
-	    mp->b_rptr += 2;	/* drop the address & ctrl fields */
-	    if (proto < 0x100 && (cp->flags & COMP_PROT))
-		++mp->b_rptr;	/* drop the high protocol byte */
-	} else if (proto < 0x100 && (cp->flags & COMP_PROT)) {
-	    /* shuffle up the address & ctrl fields */
-	    mp->b_rptr[2] = mp->b_rptr[1];
-	    mp->b_rptr[1] = mp->b_rptr[0];
-	    ++mp->b_rptr;
-	}
-
-	cp->stats.ppp_opackets++;
-	cp->stats.ppp_obytes += msgdsize(mp);
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_rput(q, mp)
-    queue_t *q;
-    mblk_t *mp;
-{
-    comp_state_t *cp;
-    struct iocblk *iop;
-    struct ppp_stats *psp;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_rput\n");
-	freemsg(mp);
-	return 0;
-    }
-
-    switch (mp->b_datap->db_type) {
-
-    case M_DATA:
-	putq(q, mp);
-	break;
-
-    case M_IOCACK:
-	iop = (struct iocblk *) mp->b_rptr;
-	switch (iop->ioc_cmd) {
-	case PPPIO_GETSTAT:
-	    /*
-	     * Catch this on the way back from the ppp_ahdl module
-	     * so we can fill in the VJ stats.
-	     */
-	    if (mp->b_cont == 0 || iop->ioc_count != sizeof(struct ppp_stats))
-		break;
-	    psp = (struct ppp_stats *) mp->b_cont->b_rptr;
-	    psp->vj = cp->vj_comp.stats;
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    case M_CTL:
-	switch (mp->b_rptr[0]) {
-	case PPPCTL_IERROR:
-	    ++cp->stats.ppp_ierrors;
-	    break;
-	case PPPCTL_OERROR:
-	    ++cp->stats.ppp_oerrors;
-	    break;
-	}
-	putnext(q, mp);
-	break;
-
-    default:
-	putnext(q, mp);
-    }
-
-    return 0;
-}
-
-static int
-ppp_comp_rsrv(q)
-    queue_t *q;
-{
-    int proto, rv, i;
-    mblk_t *mp, *dmp = NULL, *np;
-    uchar_t *dp, *iphdr;
-    comp_state_t *cp;
-    int len, hlen, vjlen;
-    u_int iphlen;
-
-    cp = (comp_state_t *) q->q_ptr;
-    if (cp == 0) {
-	DPRINT("cp == 0 in ppp_comp_rsrv\n");
-	return 0;
-    }
-
-    while ((mp = getq(q)) != 0) {
-	/* assert(mp->b_datap->db_type == M_DATA) */
-	if (!canputnext(q)) {
-	    putbq(q, mp);
-	    break;
-	}
-
-	len = msgdsize(mp);
-	cp->stats.ppp_ibytes += len;
-	cp->stats.ppp_ipackets++;
-
-	/*
-	 * First work out the protocol and where the PPP header ends.
-	 */
-	i = 0;
-	proto = MSG_BYTE(mp, 0);
-	if (proto == PPP_ALLSTATIONS) {
-	    i = 2;
-	    proto = MSG_BYTE(mp, 2);
-	}
-	if ((proto & 1) == 0) {
-	    ++i;
-	    proto = (proto << 8) + MSG_BYTE(mp, i);
-	}
-	hlen = i + 1;
-
-	/*
-	 * Now reconstruct a complete, contiguous PPP header at the
-	 * start of the packet.
-	 */
-	if (hlen < ((cp->flags & DECOMP_AC)? 0: 2)
-	           + ((cp->flags & DECOMP_PROT)? 1: 2)) {
-	    /* count these? */
-	    goto bad;
-	}
-	if (mp->b_rptr + hlen > mp->b_wptr) {
-	    adjmsg(mp, hlen);	/* XXX check this call */
-	    hlen = 0;
-	}
-	if (hlen != PPP_HDRLEN) {
-	    /*
-	     * We need to put some bytes on the front of the packet
-	     * to make a full-length PPP header.
-	     * If we can put them in *mp, we do, otherwise we
-	     * tack another mblk on the front.
-	     * XXX we really shouldn't need to carry around
-	     * the address and control at this stage.
-	     */
-	    dp = mp->b_rptr + hlen - PPP_HDRLEN;
-	    if (dp < mp->b_datap->db_base || mp->b_datap->db_ref > 1) {
-		np = allocb(PPP_HDRLEN, BPRI_MED);
-		if (np == 0)
-		    goto bad;
-		np->b_cont = mp;
-		mp->b_rptr += hlen;
-		mp = np;
-		dp = mp->b_wptr;
-		mp->b_wptr += PPP_HDRLEN;
-	    } else
-		mp->b_rptr = dp;
-
-	    dp[0] = PPP_ALLSTATIONS;
-	    dp[1] = PPP_UI;
-	    dp[2] = proto >> 8;
-	    dp[3] = proto;
-	}
-
-	/*
-	 * Now see if we have a compressed packet to decompress,
-	 * or a CCP packet to take notice of.
-	 */
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	if (proto == PPP_CCP) {
-	    len = msgdsize(mp);
-	    if (mp->b_wptr < mp->b_rptr + len) {
-		PULLUP(mp, len);
-		if (mp == 0)
-		    goto bad;
-	    }
-	    ppp_comp_ccp(q, mp, 1);
-	} else if (proto == PPP_COMP) {
-	    if ((cp->flags & CCP_ISUP)
-		&& (cp->flags & CCP_DECOMP_RUN) && cp->rstate
-		&& (cp->flags & CCP_ERR) == 0) {
-		rv = (*cp->rcomp->decompress)(cp->rstate, mp, &dmp);
-		switch (rv) {
-		case DECOMP_OK:
-		    freemsg(mp);
-		    mp = dmp;
-		    if (mp == NULL) {
-			/* no error, but no packet returned either. */
-			continue;
-		    }
-		    break;
-		case DECOMP_ERROR:
-		    cp->flags |= CCP_ERROR;
-		    ++cp->stats.ppp_ierrors;
-		    putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-		    break;
-		case DECOMP_FATALERROR:
-		    cp->flags |= CCP_FATALERROR;
-		    ++cp->stats.ppp_ierrors;
-		    putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-		    break;
-		}
-	    }
-	} else if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
-	    (*cp->rcomp->incomp)(cp->rstate, mp);
-	}
-
-	/*
-	 * Now do VJ decompression.
-	 */
-	proto = PPP_PROTOCOL(mp->b_rptr);
-	if (proto == PPP_VJC_COMP || proto == PPP_VJC_UNCOMP) {
-	    len = msgdsize(mp) - PPP_HDRLEN;
-	    if ((cp->flags & DECOMP_VJC) == 0 || len <= 0)
-		goto bad;
-
-	    /*
-	     * Advance past the ppp header.
-	     * Here we assume that the whole PPP header is in the first mblk.
-	     */
-	    np = mp;
-	    dp = np->b_rptr + PPP_HDRLEN;
-	    if (dp >= mp->b_wptr) {
-		np = np->b_cont;
-		dp = np->b_rptr;
-	    }
-
-	    /*
-	     * Make sure we have sufficient contiguous data at this point.
-	     */
-	    hlen = (proto == PPP_VJC_COMP)? MAX_VJHDR: MAX_IPHDR;
-	    if (hlen > len)
-		hlen = len;
-	    if (np->b_wptr < dp + hlen || np->b_datap->db_ref > 1) {
-		PULLUP(mp, hlen + PPP_HDRLEN);
-		if (mp == 0)
-		    goto bad;
-		np = mp;
-		dp = np->b_rptr + PPP_HDRLEN;
-	    }
-
-	    if (proto == PPP_VJC_COMP) {
-		/*
-		 * Decompress VJ-compressed packet.
-		 * First reset compressor if an input error has occurred.
-		 */
-		if (cp->stats.ppp_ierrors != cp->vj_last_ierrors) {
-		    if (cp->flags & DBGLOG)
-			DPRINT1("ppp%d: resetting VJ\n", cp->unit);
-		    vj_uncompress_err(&cp->vj_comp);
-		    cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-		}
-
-		vjlen = vj_uncompress_tcp(dp, np->b_wptr - dp, len,
-					  &cp->vj_comp, &iphdr, &iphlen);
-		if (vjlen < 0) {
-		    if (cp->flags & DBGLOG)
-			DPRINT2("ppp%d: vj_uncomp_tcp failed, pkt len %d\n",
-				cp->unit, len);
-		    ++cp->vj_last_ierrors;  /* so we don't reset next time */
-		    goto bad;
-		}
-
-		/* drop ppp and vj headers off */
-		if (mp != np) {
-		    freeb(mp);
-		    mp = np;
-		}
-		mp->b_rptr = dp + vjlen;
-
-		/* allocate a new mblk for the ppp and ip headers */
-		if ((np = allocb(iphlen + PPP_HDRLEN + 4, BPRI_MED)) == 0)
-		    goto bad;
-		dp = np->b_rptr;	/* prepend mblk with TCP/IP hdr */
-		dp[0] = PPP_ALLSTATIONS; /* reconstruct PPP header */
-		dp[1] = PPP_UI;
-		dp[2] = PPP_IP >> 8;
-		dp[3] = PPP_IP;
-		bcopy((caddr_t)iphdr, (caddr_t)dp + PPP_HDRLEN, iphlen);
-		np->b_wptr = dp + iphlen + PPP_HDRLEN;
-		np->b_cont = mp;
-
-		/* XXX there seems to be a bug which causes panics in strread
-		   if we make an mbuf with only the IP header in it :-( */
-		if (mp->b_wptr - mp->b_rptr > 4) {
-		    bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr, 4);
-		    mp->b_rptr += 4;
-		    np->b_wptr += 4;
-		} else {
-		    bcopy((caddr_t)mp->b_rptr, (caddr_t)np->b_wptr,
-			  mp->b_wptr - mp->b_rptr);
-		    np->b_wptr += mp->b_wptr - mp->b_rptr;
-		    np->b_cont = mp->b_cont;
-		    freeb(mp);
-		}
-
-		mp = np;
-
-	    } else {
-		/*
-		 * "Decompress" a VJ-uncompressed packet.
-		 */
-		cp->vj_last_ierrors = cp->stats.ppp_ierrors;
-		if (!vj_uncompress_uncomp(dp, hlen, &cp->vj_comp)) {
-		    if (cp->flags & DBGLOG)
-			DPRINT2("ppp%d: vj_uncomp_uncomp failed, pkt len %d\n",
-				cp->unit, len);
-		    ++cp->vj_last_ierrors;  /* don't need to reset next time */
-		    goto bad;
-		}
-		mp->b_rptr[3] = PPP_IP;	/* fix up the PPP protocol field */
-	    }
-	}
-
-	putnext(q, mp);
-	continue;
-
-    bad:
-	if (mp != 0)
-	    freemsg(mp);
-	cp->stats.ppp_ierrors++;
-	putctl1(q->q_next, M_CTL, PPPCTL_IERROR);
-    }
-
-    return 0;
-}
-
-/*
- * Handle a CCP packet being sent or received.
- * Here all the data in the packet is in a single mbuf.
- */
-static void
-ppp_comp_ccp(q, mp, rcvd)
-    queue_t *q;
-    mblk_t *mp;
-    int rcvd;
-{
-    int len, clen;
-    comp_state_t *cp;
-    unsigned char *dp;
-
-    len = msgdsize(mp);
-    if (len < PPP_HDRLEN + CCP_HDRLEN)
-	return;
-
-    cp = (comp_state_t *) q->q_ptr;
-    dp = mp->b_rptr + PPP_HDRLEN;
-    len -= PPP_HDRLEN;
-    clen = CCP_LENGTH(dp);
-    if (clen > len)
-	return;
-
-    switch (CCP_CODE(dp)) {
-    case CCP_CONFREQ:
-    case CCP_TERMREQ:
-    case CCP_TERMACK:
-	cp->flags &= ~CCP_ISUP;
-	break;
-
-    case CCP_CONFACK:
-	if ((cp->flags & (CCP_ISOPEN | CCP_ISUP)) == CCP_ISOPEN
-	    && clen >= CCP_HDRLEN + CCP_OPT_MINLEN
-	    && clen >= CCP_HDRLEN + CCP_OPT_LENGTH(dp + CCP_HDRLEN)) {
-	    if (!rcvd) {
-		if (cp->xstate != NULL
-		    && (*cp->xcomp->comp_init)
-		        (cp->xstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
-			 cp->unit, 0, ((cp->flags & DBGLOG) != 0)))
-		    cp->flags |= CCP_COMP_RUN;
-	    } else {
-		if (cp->rstate != NULL
-		    && (*cp->rcomp->decomp_init)
-		        (cp->rstate, dp + CCP_HDRLEN, clen - CCP_HDRLEN,
-			 cp->unit, 0, cp->mru, ((cp->flags & DBGLOG) != 0)))
-		    cp->flags = (cp->flags & ~CCP_ERR) | CCP_DECOMP_RUN;
-	    }
-	}
-	break;
-
-    case CCP_RESETACK:
-	if (cp->flags & CCP_ISUP) {
-	    if (!rcvd) {
-		if (cp->xstate && (cp->flags & CCP_COMP_RUN))
-		    (*cp->xcomp->comp_reset)(cp->xstate);
-	    } else {
-		if (cp->rstate && (cp->flags & CCP_DECOMP_RUN)) {
-		    (*cp->rcomp->decomp_reset)(cp->rstate);
-		    cp->flags &= ~CCP_ERROR;
-		}
-	    }
-	}
-	break;
-    }
-}
-
-#if 0
-dump_msg(mp)
-    mblk_t *mp;
-{
-    dblk_t *db;
-
-    while (mp != 0) {
-	db = mp->b_datap;
-	DPRINT2("mp=%x cont=%x ", mp, mp->b_cont);
-	DPRINT3("rptr=%x wptr=%x datap=%x\n", mp->b_rptr, mp->b_wptr, db);
-	DPRINT2("  base=%x lim=%x", db->db_base, db->db_lim);
-	DPRINT2(" ref=%d type=%d\n", db->db_ref, db->db_type);
-	mp = mp->b_cont;
-    }
-}
-#endif
-
-static int
-msg_byte(mp, i)
-    mblk_t *mp;
-    unsigned int i;
-{
-    while (mp != 0 && i >= mp->b_wptr - mp->b_rptr)
-	mp = mp->b_cont;
-    if (mp == 0)
-	return -1;
-    return mp->b_rptr[i];
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_comp_mod.c b/mdk-stage1/ppp/solaris/ppp_comp_mod.c
deleted file mode 100644
index 83ff8e252..000000000
--- a/mdk-stage1/ppp/solaris/ppp_comp_mod.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * ppp_comp_mod.c - modload support for PPP compression STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_compinfo;
-
-static struct fmodsw fsw = {
-    "ppp_comp",
-    &ppp_compinfo,
-    D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
-    &mod_strmodops,
-    "PPP compression module",
-    &fsw
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modlstrmod,
-    NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_mod.c b/mdk-stage1/ppp/solaris/ppp_mod.c
deleted file mode 100644
index a4b1538a5..000000000
--- a/mdk-stage1/ppp/solaris/ppp_mod.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * ppp_mod.c - modload support for PPP pseudo-device driver.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-#include <sys/ksynch.h>
-
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-
-static int ppp_identify __P((dev_info_t *));
-static int ppp_attach __P((dev_info_t *, ddi_attach_cmd_t));
-static int ppp_detach __P((dev_info_t *, ddi_detach_cmd_t));
-static int ppp_devinfo __P((dev_info_t *, ddi_info_cmd_t, void *, void **));
-
-extern struct streamtab pppinfo;
-extern krwlock_t ppp_lower_lock;
-
-static dev_info_t *ppp_dip;
-
-static struct cb_ops cb_ppp_ops = {
-    nulldev, nulldev, nodev, nodev,	/* cb_open, ... */
-    nodev, nodev, nodev, nodev,		/* cb_dump, ... */
-    nodev, nodev, nodev, nochpoll,	/* cb_devmap, ... */
-    ddi_prop_op,			/* cb_prop_op */
-    &pppinfo,				/* cb_stream */
-    D_NEW|D_MP|D_MTQPAIR|D_MTOUTPERIM|D_MTOCEXCL	/* cb_flag */
-};
-
-static struct dev_ops ppp_ops = {
-    DEVO_REV,				/* devo_rev */
-    0,					/* devo_refcnt */
-    ppp_devinfo,			/* devo_getinfo */
-    ppp_identify,			/* devo_identify */
-    nulldev,				/* devo_probe */
-    ppp_attach,				/* devo_attach */
-    ppp_detach,				/* devo_detach */
-    nodev,				/* devo_reset */
-    &cb_ppp_ops,			/* devo_cb_ops */
-    NULL				/* devo_bus_ops */
-};
-
-/*
- * Module linkage information
- */
-
-static struct modldrv modldrv = {
-    &mod_driverops,			/* says this is a pseudo driver */
-    "PPP-2.3 multiplexing driver",
-    &ppp_ops				/* driver ops */
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modldrv,
-    NULL
-};
-
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
-
-static int
-ppp_identify(dip)
-    dev_info_t *dip;
-{
-    return strcmp(ddi_get_name(dip), "ppp") == 0? DDI_IDENTIFIED:
-	DDI_NOT_IDENTIFIED;
-}
-
-static int
-ppp_attach(dip, cmd)
-    dev_info_t *dip;
-    ddi_attach_cmd_t cmd;
-{
-
-    if (cmd != DDI_ATTACH)
-	return DDI_FAILURE;
-    if (ddi_create_minor_node(dip, "ppp", S_IFCHR, 0, DDI_PSEUDO, CLONE_DEV)
-	== DDI_FAILURE) {
-	ddi_remove_minor_node(dip, NULL);
-	return DDI_FAILURE;
-    }
-    rw_init(&ppp_lower_lock, NULL, RW_DRIVER, NULL);
-    return DDI_SUCCESS;
-}
-
-static int
-ppp_detach(dip, cmd)
-    dev_info_t *dip;
-    ddi_detach_cmd_t cmd;
-{
-    rw_destroy(&ppp_lower_lock);
-    ddi_remove_minor_node(dip, NULL);
-    return DDI_SUCCESS;
-}
-
-static int
-ppp_devinfo(dip, cmd, arg, result)
-    dev_info_t *dip;
-    ddi_info_cmd_t cmd;
-    void *arg;
-    void **result;
-{
-    int error;
-
-    error = DDI_SUCCESS;
-    switch (cmd) {
-    case DDI_INFO_DEVT2DEVINFO:
-	if (ppp_dip == NULL)
-	    error = DDI_FAILURE;
-	else
-	    *result = (void *) ppp_dip;
-	break;
-    case DDI_INFO_DEVT2INSTANCE:
-	*result = NULL;
-	break;
-    default:
-	error = DDI_FAILURE;
-    }
-    return error;
-}
diff --git a/mdk-stage1/ppp/solaris/ppp_mod.h b/mdk-stage1/ppp/solaris/ppp_mod.h
deleted file mode 100644
index f0af00886..000000000
--- a/mdk-stage1/ppp/solaris/ppp_mod.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Miscellaneous definitions for PPP STREAMS modules.
- */
-
-/*
- * Macros for allocating and freeing kernel memory.
- */
-#ifdef SVR4			/* SVR4, including Solaris 2 */
-#include <sys/kmem.h>
-#define ALLOC_SLEEP(n)		kmem_alloc((n), KM_SLEEP)
-#define ALLOC_NOSLEEP(n)	kmem_alloc((n), KM_NOSLEEP)
-#define FREE(p, n)		kmem_free((p), (n))
-#endif
-
-#ifdef SUNOS4
-#include <sys/kmem_alloc.h>	/* SunOS 4.x */
-#define ALLOC_SLEEP(n)		kmem_alloc((n), KMEM_SLEEP)
-#define ALLOC_NOSLEEP(n)	kmem_alloc((n), KMEM_NOSLEEP)
-#define FREE(p, n)		kmem_free((p), (n))
-#define NOTSUSER()		(suser()? 0: EPERM)
-#define bcanputnext(q, band)	canputnext((q))
-#endif /* SunOS 4 */
-
-#ifdef __osf__
-#include <sys/malloc.h>
-
-/* caution: this mirrors macros in sys/malloc.h, and uses interfaces
- * which are subject to change.
- * The problems are that:
- *     - the official MALLOC macro wants the lhs of the assignment as an argument,
- *	 and it takes care of the assignment itself (yuck.)
- *     - PPP insists on using "FREE" which conflicts with a macro of the same name.
- *
- */
-#ifdef BUCKETINDX /* V2.0 */
-#define ALLOC_SLEEP(n)		(void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n)	(void *)malloc((u_long)(n), BUCKETP(n), M_DEVBUF, M_NOWAIT)
-#else
-#define ALLOC_SLEEP(n)		(void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_WAITOK)
-#define ALLOC_NOSLEEP(n)	(void *)malloc((u_long)(n), BUCKETINDEX(n), M_DEVBUF, M_NOWAIT)
-#endif
-
-#define bcanputnext(q, band)	canputnext((q))
-
-#ifdef FREE
-#undef FREE
-#endif
-#define FREE(p, n)		free((void *)(p), M_DEVBUF)
-
-#define NO_DLPI 1
-
-#ifndef IFT_PPP
-#define IFT_PPP 0x17
-#endif
-
-#include <sys/proc.h>
-#define NOTSUSER()		(suser(u.u_procp->p_rcred, &u.u_acflag) ? EPERM : 0)
-
-/* #include "ppp_osf.h" */
-
-#endif /* __osf__ */
-
-#ifdef AIX4
-#define ALLOC_SLEEP(n)		xmalloc((n), 0, pinned_heap)	/* AIX V4.x */
-#define ALLOC_NOSLEEP(n)	xmalloc((n), 0, pinned_heap)	/* AIX V4.x */
-#define FREE(p, n)		xmfree((p), pinned_heap)
-#define NOTSUSER()		(suser()? 0: EPERM)
-#endif /* AIX */
-
-/*
- * Macros for printing debugging stuff.
- */
-#ifdef DEBUG
-#if defined(SVR4) || defined(__osf__)
-#if defined(SNI)
-#include <sys/strlog.h>
-#define STRLOG_ID		4712
-#define DPRINT(f)		strlog(STRLOG_ID, 0, 0, SL_TRACE, f)
-#define DPRINT1(f, a1)		strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1)
-#define DPRINT2(f, a1, a2)	strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	strlog(STRLOG_ID, 0, 0, SL_TRACE, f, a1, a2, a3)
-#else
-#define DPRINT(f)		cmn_err(CE_CONT, f)
-#define DPRINT1(f, a1)		cmn_err(CE_CONT, f, a1)
-#define DPRINT2(f, a1, a2)	cmn_err(CE_CONT, f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	cmn_err(CE_CONT, f, a1, a2, a3)
-#endif /* SNI */
-#else
-#define DPRINT(f)		printf(f)
-#define DPRINT1(f, a1)		printf(f, a1)
-#define DPRINT2(f, a1, a2)	printf(f, a1, a2)
-#define DPRINT3(f, a1, a2, a3)	printf(f, a1, a2, a3)
-#endif /* SVR4 or OSF */
-
-#else
-#define DPRINT(f)		0
-#define DPRINT1(f, a1)		0
-#define DPRINT2(f, a1, a2)	0
-#define DPRINT3(f, a1, a2, a3)	0
-#endif /* DEBUG */
-
-#ifndef SVR4
-typedef unsigned char uchar_t;
-typedef unsigned short ushort_t;
-#ifndef __osf__
-typedef int minor_t;
-#endif
-#endif
-
-/*
- * If we don't have multithreading support, define substitutes.
- */
-#ifndef D_MP
-# define qprocson(q)
-# define qprocsoff(q)
-# define put(q, mp)	((*(q)->q_qinfo->qi_putp)((q), (mp)))
-# define canputnext(q)	canput((q)->q_next)
-# define qwriter(q, mp, func, scope)	(func)((q), (mp))
-#endif
-
-#ifdef D_MP
-/* Use msgpullup if we have other multithreading support. */
-#define PULLUP(mp, len)				\
-    do {					\
-	mblk_t *np = msgpullup((mp), (len));	\
-	freemsg((mp));				\
-	mp = np;				\
-    } while (0)
-
-#else
-/* Use pullupmsg if we don't have any multithreading support. */
-#define PULLUP(mp, len)			\
-    do {				\
-	if (!pullupmsg((mp), (len))) {	\
-	    freemsg((mp));		\
-	    mp = 0;			\
-	}				\
-    } while (0)
-#endif
-
-/*
- * How to declare the open and close procedures for a module.
- */
-#ifdef SVR4
-#define MOD_OPEN_DECL(name)	\
-static int name __P((queue_t *, dev_t *, int, int, cred_t *))
-
-#define MOD_CLOSE_DECL(name)	\
-static int name __P((queue_t *, int, cred_t *))
-
-#define MOD_OPEN(name)				\
-static int name(q, devp, flag, sflag, credp)	\
-    queue_t *q;					\
-    dev_t *devp;				\
-    int flag, sflag;				\
-    cred_t *credp;
-
-#define MOD_CLOSE(name)		\
-static int name(q, flag, credp)	\
-    queue_t *q;			\
-    int flag;			\
-    cred_t *credp;
-
-#define OPEN_ERROR(x)		return (x)
-#define DRV_OPEN_OK(dev)	return 0
-
-#define NOTSUSER()		(drv_priv(credp))
-
-#else	/* not SVR4 */
-#define MOD_OPEN_DECL(name)	\
-static int name __P((queue_t *, int, int, int))
-
-#define MOD_CLOSE_DECL(name)	\
-static int name __P((queue_t *, int))
-
-#define MOD_OPEN(name)		\
-static int name(q, dev, flag, sflag)	\
-    queue_t *q;				\
-    int dev;				\
-    int flag, sflag;
-
-#define MOD_CLOSE(name)		\
-static int name(q, flag)	\
-    queue_t *q;			\
-    int flag;
-
-#define OPEN_ERROR(x)		{ u.u_error = (x); return OPENFAIL; }
-#define DRV_OPEN_OK(dev)	return (dev)
-
-#endif	/* SVR4 */
diff --git a/mdk-stage1/ppp/sunos4/Makedefs b/mdk-stage1/ppp/sunos4/Makedefs
deleted file mode 100644
index 8b56a2b67..000000000
--- a/mdk-stage1/ppp/sunos4/Makedefs
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= install -o root -g daemon
-
-BINDIR = /usr/local/etc
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-# To use gcc, uncomment the next line.
-#CC = gcc
-COPTS = -O
diff --git a/mdk-stage1/ppp/sunos4/Makefile b/mdk-stage1/ppp/sunos4/Makefile
deleted file mode 100644
index 701e24e14..000000000
--- a/mdk-stage1/ppp/sunos4/Makefile
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-# Makefile for STREAMS modules for SunOS 4.
-#
-# $Id$
-#
-
-include Makedefs
-
-LD = /usr/bin/ld		# make sure we don't get gnu ld
-
-# Defining __$(ARCH)__ is for gcc's broken version of sun/vddrv.h.
-ARCH = `/bin/arch -k`
-DEFINES= -DKERNEL -D_KERNEL -DSUNOS4 -D$(ARCH) -D__$(ARCH)__ \
-	 -DDEBUG -DNO_DLPI -DSNIT_SUPPORT
-CFLAGS= $(DEFINES) -I../include $(COPTS)
-
-MODULES= ppp_mod.o ppp_ahdl_mod.o ppp_comp_mod.o if_ppp_mod.o
-
-all:	$(MODULES)
-
-ppp_mod.o:	ppp.o ppp_vdcmd.o
-	$(LD) -r -o ppp_mod.o ppp.o ppp_vdcmd.o
-
-ppp_ahdl_mod.o: ppp_ahdlc.o ppp_ahdlc_vdcmd.o
-	$(LD) -r -o ppp_ahdl_mod.o ppp_ahdlc.o ppp_ahdlc_vdcmd.o
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
-	ppp_comp_vdcmd.o
-ppp_comp_mod.o: $(COMP_OBJS)
-	$(LD) -r -o $@ $(COMP_OBJS)
-
-if_ppp.o: ../modules/if_ppp.c
-	$(CC) $(CFLAGS) -c $?
-bsd-comp.o: ../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $?
-deflate.o: ../modules/deflate.c
-	$(CC) $(CFLAGS) -c $?
-ppp.o:	../modules/ppp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
-	$(CC) $(CFLAGS) -c $?
-vjcompress.o: ../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $?
-zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $?
-
-if_ppp_mod.o:	if_ppp.o if_ppp_vdcmd.o
-	$(LD) -r -o if_ppp_mod.o if_ppp.o if_ppp_vdcmd.o
-
-install: all
-	$(INSTALL) $(MODULES) $(BINDIR)
-	./ppp.INSTALL
-
-clean:
-	rm -f ppp ppp_comp ppp_ahdl *.o *~ core
diff --git a/mdk-stage1/ppp/sunos4/Makefile.top b/mdk-stage1/ppp/sunos4/Makefile.top
deleted file mode 100644
index c86e0884d..000000000
--- a/mdk-stage1/ppp/sunos4/Makefile.top
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# ppp top level makefile
-#
-
-include sunos4/Makedefs
-
-all:
-	cd chat; $(MAKE) all
-	cd pppd; $(MAKE) all
-	cd pppstats; $(MAKE) all
-	cd sunos4; $(MAKE) all
-	cd pppdump; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
-	cd chat; $(MAKE) install
-	cd pppd; $(MAKE) install
-	cd pppstats; $(MAKE) install
-	cd pppdump; $(MAKE) install
-	cd sunos4; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-	$(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
-	$(INSTALL) -c -m 644 etc.ppp/options $@
-$(ETCDIR)/pap-secrets:
-	$(INSTALL) -c -m 600 etc.ppp/pap-secrets $@
-$(ETCDIR)/chap-secrets:
-	$(INSTALL) -c -m 600 etc.ppp/chap-secrets $@
-
-$(BINDIR):
-	$(INSTALL) -d -m 755 $@
-$(MANDIR)/man8:
-	$(INSTALL) -d -m 755 $@
-$(ETCDIR):
-	$(INSTALL) -d -m 755 $@
-
-clean:
-	rm -f *~
-	cd chat; $(MAKE) clean
-	cd pppd; $(MAKE) clean
-	cd pppstats; $(MAKE) clean
-	cd sunos4; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c b/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c
deleted file mode 100644
index 2bf9710f4..000000000
--- a/mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab if_pppinfo;
-
-static struct vdldrv vd = {
-    VDMAGIC_USER,
-    "if_ppp"
-};
-
-static int fmodsw_index = -1;
-
-int
-if_ppp_vdcmd(fun, vdp, vdi, vds)
-    unsigned int fun;
-    struct vddrv *vdp;
-    addr_t vdi;
-    struct vdstat *vds;
-{
-    int n, error;
-
-    switch (fun) {
-    case VDLOAD:
-	vdp->vdd_vdtab = (struct vdlinkage *) &vd;
-	if (fmodsw_index >= 0)
-	    return EBUSY;
-	for (n = 0; n < fmodcnt; ++n)
-	    if (fmodsw[n].f_str == 0)
-		break;
-	if (n >= fmodcnt)
-	    return ENODEV;
-	strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
-	fmodsw[n].f_str = &if_pppinfo;
-	fmodsw_index = n;
-	break;
-
-    case VDUNLOAD:
-	if (fmodsw_index <= 0)
-	    return EINVAL;
-	error = if_ppp_unload();
-	if (error != 0)
-	    return error;
-	fmodsw[fmodsw_index].f_name[0] = 0;
-	fmodsw[fmodsw_index].f_str = 0;
-	fmodsw_index = -1;
-	break;
-
-    case VDSTAT:
-	break;
-
-    default:
-	return EIO;
-    }
-    return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp.INSTALL b/mdk-stage1/ppp/sunos4/ppp.INSTALL
deleted file mode 100755
index 0018bf8d0..000000000
--- a/mdk-stage1/ppp/sunos4/ppp.INSTALL
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/sh
-
-# Script for loading, unloading, etc. ppp modules.
-
-moddir=/usr/local/etc
-etcppp=/etc/ppp
-
-PATH=/usr/etc:/usr/bin
-
-# Check that we're superuser
-touch /tmp/su$$
-if chown root /tmp/su$$ >/dev/null; then :
-else
-    echo "$0: must be root."
-    rm -f /tmp/su$$
-    exit 1
-fi
-rm -f /tmp/su$$
-
-case "$0" in
-*ppp.INSTALL)
-    if [ ! -f ppp.INSTALL ]; then
-	echo "ppp.INSTALL: not found"
-	exit 1
-    fi
-    for n in INSTALL LOAD UNLOAD MKDEV RMDEV; do
-	if [ -h /dev/ppp.$n -o -f /dev/ppp.$n ]; then
-	    rm /dev/ppp.$n
-	fi
-    done
-    cp ppp.INSTALL /dev
-    for n in LOAD UNLOAD MKDEV RMDEV; do
-	ln -s ppp.INSTALL /dev/ppp.$n
-    done
-    ;;
-
-*ppp.LOAD)
-    if modstat | grep -w ppp >/dev/null; then
-	echo "ppp driver is already loaded."
-	exit 1
-    fi
-    if modstat | grep -w if_ppp >/dev/null; then
-	echo "if_ppp module already loaded: not reloading."
-    else
-	echo -n "if_ppp: "
-	modload $moddir/if_ppp_mod.o -sym -entry _if_ppp_vdcmd \
-	    -o $etcppp/if_ppp_mod
-    fi
-    echo -n "ppp: "
-    modload $moddir/ppp_mod.o -sym -entry _ppp_vdcmd -exec /dev/ppp.MKDEV \
-	-o $etcppp/ppp_mod
-    echo -n "ppp_comp: "
-    modload $moddir/ppp_comp_mod.o -sym -entry _ppp_comp_vdcmd \
-	-o $etcppp/ppp_comp
-    echo -n "ppp_ahdl: "
-    modload $moddir/ppp_ahdl_mod.o -sym -entry _ppp_ahdlc_vdcmd \
-	-o $etcppp/ppp_ahdl
-    exit 0
-    ;;
-
-*ppp.MKDEV)
-    # args: module number, type, b-major, c-major
-    if [ $# -ne 4 ]; then
-	echo "Usage: $0 module-id module-type b-major c-major"
-	exit 1
-    fi
-    if [ "$2" -ne "12345607" -a "$2" -ne "12345600" ]; then
-	echo "$0: $2: bad module type"
-	exit 1
-    fi
-    rm -f /dev/ppp
-    # we "just know" that 37 is the major number of the clone driver
-    mknod /dev/ppp c 37 $4
-    chmod 644 /dev/ppp
-    exit 0
-    ;;
-
-*ppp.UNLOAD)
-    stat=0
-    if modstat | grep -w if_ppp >/dev/null; then
-	echo "$0: not unloading if_ppp module."
-    fi
-    for mod in ppp ppp_comp ppp_ahdl; do
-	id=`modstat | grep -w $mod | awk '{print $1}'`
-	if [ x$id = x ]; then
-	    echo "$mod is not loaded."
-	    stat=1
-	else
-	    modunload -id $id
-	fi
-    done
-    exit $stat
-    ;;
-
-*ppp.RMDEV)
-    rm -f /dev/ppp
-    exit 0
-    ;;
-
-*)
-    echo "Invocation names: ppp.INSTALL ppp.LOAD ppp.UNLOAD ppp.MKDEV ppp.RMDEV"
-    exit 1
-    ;;
-esac
diff --git a/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c
deleted file mode 100644
index 2dbe8262b..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-extern int ppp_ahdlc_count;
-
-static struct vdldrv vd = {
-    VDMAGIC_USER,
-    "ppp_ahdl"
-};
-
-static int fmodsw_index = -1;
-
-int
-ppp_ahdlc_vdcmd(fun, vdp, vdi, vds)
-    unsigned int fun;
-    struct vddrv *vdp;
-    addr_t vdi;
-    struct vdstat *vds;
-{
-    int n;
-
-    switch (fun) {
-    case VDLOAD:
-	vdp->vdd_vdtab = (struct vdlinkage *) &vd;
-	if (fmodsw_index >= 0)
-	    return EBUSY;
-	for (n = 0; n < fmodcnt; ++n)
-	    if (fmodsw[n].f_str == 0)
-		break;
-	if (n >= fmodcnt)
-	    return ENODEV;
-	strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
-	fmodsw[n].f_str = &ppp_ahdlcinfo;
-	fmodsw_index = n;
-	break;
-
-    case VDUNLOAD:
-	if (ppp_ahdlc_count > 0)
-	    return EBUSY;
-	if (fmodsw_index <= 0)
-	    return EINVAL;
-	fmodsw[fmodsw_index].f_name[0] = 0;
-	fmodsw[fmodsw_index].f_str = 0;
-	fmodsw_index = -1;
-	break;
-
-    case VDSTAT:
-	break;
-
-    default:
-	return EIO;
-    }
-    return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c
deleted file mode 100644
index b81bc47e8..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c
+++ /dev/null
@@ -1,57 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab ppp_compinfo;
-extern int ppp_comp_count;
-
-static struct vdldrv vd = {
-    VDMAGIC_USER,
-    "ppp_comp"
-};
-
-static int fmodsw_index = -1;
-
-int
-ppp_comp_vdcmd(fun, vdp, vdi, vds)
-    unsigned int fun;
-    struct vddrv *vdp;
-    addr_t vdi;
-    struct vdstat *vds;
-{
-    int n;
-
-    switch (fun) {
-    case VDLOAD:
-	vdp->vdd_vdtab = (struct vdlinkage *) &vd;
-	if (fmodsw_index >= 0)
-	    return EBUSY;
-	for (n = 0; n < fmodcnt; ++n)
-	    if (fmodsw[n].f_str == 0)
-		break;
-	if (n >= fmodcnt)
-	    return ENODEV;
-	strncpy(fmodsw[n].f_name, vd.Drv_name, FMNAMESZ+1);
-	fmodsw[n].f_str = &ppp_compinfo;
-	fmodsw_index = n;
-	break;
-
-    case VDUNLOAD:
-	if (ppp_comp_count > 0)
-	    return EBUSY;
-	if (fmodsw_index <= 0)
-	    return EINVAL;
-	fmodsw[fmodsw_index].f_name[0] = 0;
-	fmodsw[fmodsw_index].f_str = 0;
-	fmodsw_index = -1;
-	break;
-
-    case VDSTAT:
-	break;
-
-    default:
-	return EIO;
-    }
-    return 0;
-}
diff --git a/mdk-stage1/ppp/sunos4/ppp_vdcmd.c b/mdk-stage1/ppp/sunos4/ppp_vdcmd.c
deleted file mode 100644
index 68095c92e..000000000
--- a/mdk-stage1/ppp/sunos4/ppp_vdcmd.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <sys/types.h>
-#include <sys/errno.h>
-#include <sys/conf.h>
-#include <sun/vddrv.h>
-
-extern struct streamtab pppinfo;
-extern int ppp_count;
-extern int nchrdev;
-
-static struct vdldrv vd = {
-    VDMAGIC_PSEUDO,
-    "ppp"
-};
-
-extern int nodev();
-
-static struct cdevsw ppp_cdevsw = {
-    nodev, nodev, nodev, nodev, nodev, nodev, nodev, 0,
-    &pppinfo
-};
-
-static struct cdevsw old_entry;
-
-int
-ppp_vdcmd(fun, vdp, vdi, vds)
-    unsigned int fun;
-    struct vddrv *vdp;
-    addr_t vdi;
-    struct vdstat *vds;
-{
-    static int majnum = -1;
-    int n, maj;
-
-    switch (fun) {
-    case VDLOAD:
-	/*
-	 * It seems like modload doesn't install the cdevsw entry
-	 * for us.  Oh well...
-	 */
-	for (maj = 1; maj < nchrdev; ++maj)
-	    if (cdevsw[maj].d_open == vd_unuseddev)
-		break;
-	if (maj >= nchrdev)
-	    return ENODEV;
-	vd.Drv_charmajor = maj;
-	old_entry = cdevsw[maj];
-	cdevsw[maj] = ppp_cdevsw;
-	vd.Drv_cdevsw = &ppp_cdevsw;
-	vdp->vdd_vdtab = (struct vdlinkage *) &vd;
-	majnum = maj;
-	break;
-
-    case VDUNLOAD:
-	if (ppp_count > 0)
-	    return EBUSY;
-	if (vd.Drv_charmajor > 0)
-	    cdevsw[vd.Drv_charmajor] = old_entry;
-	break;
-
-    case VDSTAT:
-	/*
-	 * We have to fool the modstat command into thinking
-	 * that this module is actually a driver! This is
-	 * so that installation commands that use the -exec
-	 * option of modload to run a shell script find out
-	 * the block and/or char major numbers of the driver
-	 * loaded (so that the shell script can go off to
-	 * /dev and *MAKE* the bloody device nodes- remember
-	 * they might change from one load to another if
-	 * you don't hardwire the number!).
-	 */
-	vds->vds_magic = VDMAGIC_DRV;
-	vds->vds_modinfo[0] = (char) 0;
-	vds->vds_modinfo[1] = (char) majnum;
-	break;
-
-    default:
-	return EIO;
-    }
-    return 0;
-}
diff --git a/mdk-stage1/ppp/svr4/Makedefs b/mdk-stage1/ppp/svr4/Makedefs
deleted file mode 100644
index 81db8ab2e..000000000
--- a/mdk-stage1/ppp/svr4/Makedefs
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# defines common to several Makefiles
-#
-
-INSTALL= /usr/sbin/install
-
-BINDIR = /usr/local/bin
-MANDIR = /usr/local/man
-ETCDIR = /etc/ppp
-
-COPTS = -O -Xa
-
-# For compiling with gcc, comment out the COPTS definition above and
-# uncomment the next 2 definitions.
-#CC = gcc
-#COPTS = -O2
diff --git a/mdk-stage1/ppp/svr4/Makedefs.sol2 b/mdk-stage1/ppp/svr4/Makedefs.sol2
deleted file mode 100644
index e8b8d282e..000000000
--- a/mdk-stage1/ppp/svr4/Makedefs.sol2
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# Generic make definitions for Solaris 2
-#
-# $Id$
-#
-
-include ../svr4/Makedefs
-
-CPPFLAGS	= -D_KERNEL -DSVR4 -DSOL2 -DPRIOQ -DDEBUG -I../include
-CFLAGS		= $(CPPFLAGS) $(COPTS)
-
-# lint-specific variables
-LINT            = lint
-LINT_OPT_32     =
-LINT_OPT_64     = -Xarch=v9 -errchk=longptr64
-
-LINT_32     	=
-LINT_32     	+= -erroff=E_BAD_PTR_CAST_ALIGN
-LINT_32     	+= -erroff=E_SUPPRESSION_DIRECTIVE_UNUSED
-LINT_32     	+= -erroff=E_SUSPICIOUS_COMPARISON
-LINT_32     	+= -erroff=E_CAST_UINT_TO_SIGNED_INT
-LINT_32     	+= -erroff=E_PASS_UINT_TO_SIGNED_INT
-LINT_32     	+= -erroff=E_INVALID_ANNOTATION_NAME
-LINT_32     	+= -erroff=E_FUNC_ARG_UNUSED
-# This might be needed, but zlib.c and vjcompress.c will squawk 
-# when not ignored
-LINT_32		+= -erroff=E_CASE_FALLTHRU
-LINT_32		+= -erroff=E_RET_INT_IMPLICITLY
-LINT_32		+= -erroff=E_FUNC_NO_RET_VAL
-# Some STREAMS macros will be noisy too when this isn't ignored
-LINT_32		+= -erroff=E_CONSTANT_CONDITION
-LINT_32		+= -erroff=E_CONST_EXPR
-
-# Extra noise suppressant for 64-bit
-EXTRA_OFF 	=
-EXTRA_OFF 	+= -erroff=E_CAST_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_CAST_INT_CONST_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_CAST_TO_PTR_FROM_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_INT_FROM_BIG_CONST
-EXTRA_OFF 	+= -erroff=E_CONST_PROMOTED_UNSIGNED_LL
-EXTRA_OFF 	+= -erroff=E_CONST_PROMOTED_LONG_LONG
-EXTRA_OFF 	+= -erroff=E_CONST_TRUNCATED_BY_ASSIGN
-EXTRA_OFF 	+= -erroff=E_PASS_INT_FROM_BIG_CONST
-EXTRA_OFF 	+= -erroff=E_COMP_INT_WITH_LARGE_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_UINT_TO_SIGNED_INT
-EXTRA_OFF 	+= -erroff=E_ASSIGN_NARROW_CONV
-EXTRA_OFF 	+= -erroff=E_PASS_INT_TO_SMALL_INT
-EXTRA_OFF 	+= -erroff=E_PTR_CONV_LOSES_BITS
-
-LINT_64     	= $(LINT_32)
-LINT_64     	+= $(EXTRA_OFF)
-
-LINTFLAGS64     = -Xa -nsxmuF -errtags=yes $(LINT_OPT_64) $(LINT_64)
-LINT64          = $(LINT) -c $(LINTFLAGS64) $(CPPFLAGS)
-
-LINTFLAGS32     = -Xa -nsxmuF -errtags=yes $(LINT_OPT_32) $(LINT_32)
-LINT32          = $(LINT) -c $(LINTFLAGS32) $(CPPFLAGS)
-
diff --git a/mdk-stage1/ppp/svr4/Makefile.sol2 b/mdk-stage1/ppp/svr4/Makefile.sol2
deleted file mode 100644
index 5b2ca8635..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.sol2
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Makefile for STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-COPTS += -xO2 -xspace -W0,-Lt
-
-COMP_OBJS = ppp_comp.o bsd-comp.o deflate.o zlib.o vjcompress.o \
-	ppp_comp_mod.o
-
-all:	ppp ppp_ahdl ppp_comp
-
-ppp:	ppp.o ppp_mod.o
-	ld -r -o $@ ppp.o ppp_mod.o
-	chmod +x $@
-
-ppp_ahdl: ppp_ahdlc.o ppp_ahdlc_mod.o
-	ld -r -o $@ ppp_ahdlc.o ppp_ahdlc_mod.o
-	chmod +x $@
-
-ppp_comp: $(COMP_OBJS)
-	ld -r -o $@ $(COMP_OBJS)
-	chmod +x $@
-
-bsd-comp.o:	../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $?
-deflate.o:	../modules/deflate.c
-	$(CC) $(CFLAGS) -c $?
-ppp.o:	../modules/ppp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_mod.o:	ppp_mod.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp_mod.o:	ppp_comp_mod.c
-	$(CC) $(CFLAGS) -c $?
-vjcompress.o:	../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $?
-zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $?
-
-install:
-	cp ppp ppp.conf /kernel/drv
-	cp ppp_comp ppp_ahdl /kernel/strmod
-	if grep clone:ppp /etc/minor_perm; then :; else \
-	  echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-	/usr/sbin/rem_drv ppp 2>/dev/null || true
-	/usr/sbin/add_drv ppp
-
-SRCS	= ../modules/ppp.c ppp_mod.c ../modules/ppp_ahdlc.c ppp_ahdlc_mod.c \
-	../modules/ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-	../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
-	$(LINT32) $(SRCS)
-
-clean:
-	rm -f ppp ppp_comp ppp_ahdl *.o *~ core
-	rm -f *.ln
diff --git a/mdk-stage1/ppp/svr4/Makefile.sol2-64 b/mdk-stage1/ppp/svr4/Makefile.sol2-64
deleted file mode 100644
index 80c6b185e..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.sol2-64
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# Makefile for 64-bit STREAMS modules for Solaris 2.
-#
-# $Id$
-#
-
-include Makedefs.sol2
-
-# Sun's cc flag for LP64 compilation / linkage
-COPTS 		+= -xchip=ultra -xarch=v9 -Wc,-xcode=abs32 -Wc,-Qiselect-regsym=0 -xO3 -xspace -W0,-Lt
-
-# subdirectory where 64-bit objects / binaries will be placed
-LP64DIR		= sparcv9
-
-# Name of legacy Makefile (for 32-bit binaries)
-STD_MAKE	= Makefile.sol2
-
-COMP_OBJS	= $(LP64DIR)/ppp_comp.o $(LP64DIR)/bsd-comp.o \
-		$(LP64DIR)/deflate.o $(LP64DIR)/zlib.o $(LP64DIR)/vjcompress.o \
-		$(LP64DIR)/ppp_comp_mod.o
-
-all:	std_objs $(LP64DIR) ppp ppp_ahdl ppp_comp
-
-std_objs:
-	$(MAKE) -f $(STD_MAKE) all
-
-ppp:	$(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-	ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp.o $(LP64DIR)/ppp_mod.o
-	chmod +x $(LP64DIR)/$@
-
-ppp_ahdl: $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-	ld -r -o $(LP64DIR)/$@ $(LP64DIR)/ppp_ahdlc.o $(LP64DIR)/ppp_ahdlc_mod.o
-	chmod +x $(LP64DIR)/$@
-
-ppp_comp: $(COMP_OBJS)
-	ld -r -o $(LP64DIR)/$@ $(COMP_OBJS)
-	chmod +x $(LP64DIR)/$@
-
-$(LP64DIR)/bsd-comp.o: ../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/deflate.o: ../modules/deflate.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp.o:	../modules/ppp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_mod.o:	ppp_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc_mod.o: ppp_ahdlc_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp.o: ../modules/ppp_comp.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/ppp_comp_mod.o: ppp_comp_mod.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/vjcompress.o: ../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $? -o $@
-$(LP64DIR)/zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $? -o $@
-
-$(LP64DIR):
-	mkdir -m 755 -p $@
-
-install:
-	cp ppp ppp.conf /kernel/drv
-	cp ppp_comp ppp_ahdl /kernel/strmod
-	cp $(LP64DIR)/ppp /kernel/drv/$(LP64DIR)
-	cp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl /kernel/strmod/$(LP64DIR)
-	if grep clone:ppp /etc/minor_perm; then :; else \
-	  echo clone:ppp 0644 root sys >>/etc/minor_perm; fi
-	/usr/sbin/rem_drv ppp 2>/dev/null || true
-	/usr/sbin/add_drv ppp
-
-SRCS	= ../modules/ppp.c ppp_mod.c ../modules/ppp_ahdlc.c ppp_ahdlc_mod.c \
-	../modules/ppp_comp.c ../modules/bsd-comp.c ../modules/deflate.c \
-	../common/zlib.c ../modules/vjcompress.c ppp_comp_mod.c
-
-lint:
-	$(LINT64) $(SRCS)
-
-lint-32:
-	$(LINT32) $(SRCS)
-
-clean:
-	$(MAKE) -f $(STD_MAKE) clean
-	rm -f $(LP64DIR)/ppp $(LP64DIR)/ppp_comp $(LP64DIR)/ppp_ahdl $(LP64DIR)/*.o $(LP64DIR)/*~ $(LP64DIR)/core
diff --git a/mdk-stage1/ppp/svr4/Makefile.svr4 b/mdk-stage1/ppp/svr4/Makefile.svr4
deleted file mode 100644
index 252c52428..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.svr4
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Makefile for STREAMS modules for SVR4.
-#
-# $Id$
-#
-
-COPTS = -O
-
-CFLAGS= -D_KERNEL -DSVR4 -DLACHTCP -I../include $(COPTS)
-
-all:	ppp ppp_ahdl ppp_comp
-
-ppp:	ppp.o
-	ld -r -o $@ ppp.o
-
-ppp_ahdl: ppp_ahdlc.o
-	ld -r -o $@ ppp_ahdlc.o
-
-ppp_comp: ppp_comp.o bsd-comp.o vjcompress.o deflate.o zlib.o
-	ld -r -o $@ ppp_comp.o bsd-comp.o vjcompress.o deflate.o zlib.o
-
-bsd-comp.o: ../modules/bsd-comp.c
-	$(CC) $(CFLAGS) -c $?
-deflate.o: ../modules/deflate.c
-	$(CC) $(CFLAGS) -c $?
-ppp.o:	../modules/ppp.c
-	$(CC) $(CFLAGS) -c $?
-ppp_ahdlc.o: ../modules/ppp_ahdlc.c
-	$(CC) $(CFLAGS) -c $?
-ppp_comp.o: ../modules/ppp_comp.c
-	$(CC) $(CFLAGS) -c $?
-vjcompress.o: ../modules/vjcompress.c
-	$(CC) $(CFLAGS) -c $?
-zlib.o:	../common/zlib.c
-	$(CC) $(CFLAGS) -c $?
-
-install: all
-	cp ppp Driver.o
-	cp ppp.Master Master
-	cp ppp.System System
-	cp ppp.Node Node
-	/etc/conf/bin/idinstall -d ppp
-	/etc/conf/bin/idinstall -a ppp
-	cp ppp_comp Driver.o
-	cp ppp_comp.Master Master
-	cp ppp_comp.System System
-	/etc/conf/bin/idinstall -d ppp_comp
-	/etc/conf/bin/idinstall -a ppp_comp
-	cp ppp_ahdl Driver.o
-	cp ppp_ahdl.Master Master
-	cp ppp_ahdl.System System
-	/etc/conf/bin/idinstall -d ppp_ahdl
-	/etc/conf/bin/idinstall -a ppp_ahdl
-	@echo 
-	@echo 'NOTE: You must rebuild your kernel to incorporate the driver.'
-	@echo '(use /etc/conf/bin/idbuild)'
-	@echo
-
-clean:
-	rm -f ppp ppp_comp ppp_ahdl *.o *~ core
diff --git a/mdk-stage1/ppp/svr4/Makefile.top b/mdk-stage1/ppp/svr4/Makefile.top
deleted file mode 100644
index 253e48acb..000000000
--- a/mdk-stage1/ppp/svr4/Makefile.top
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# ppp top level makefile for SVR4 and Solaris 2
-#
-# $Id$
-#
-
-include svr4/Makedefs
-
-all:
-	cd chat; $(MAKE) all
-	cd pppd; $(MAKE) all
-	cd pppstats; $(MAKE) all
-	cd pppdump; $(MAKE) all
-	cd svr4; $(MAKE) all
-
-install: $(BINDIR) $(MANDIR)/man8 install-progs install-etcppp
-
-install-progs:
-	cd chat; $(MAKE) install
-	cd pppd; $(MAKE) install
-	cd pppstats; $(MAKE) install
-	cd pppdump; $(MAKE) install
-	cd svr4; $(MAKE) install
-
-install-etcppp: $(ETCDIR) $(ETCDIR)/options $(ETCDIR)/pap-secrets \
-	$(ETCDIR)/chap-secrets
-
-$(ETCDIR)/options:
-	cp etc.ppp/options $@
-	chmod go-w $@
-$(ETCDIR)/pap-secrets:
-	$(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/pap-secrets
-$(ETCDIR)/chap-secrets:
-	$(INSTALL) -f $(ETCDIR) -m 600 etc.ppp/chap-secrets
-
-$(BINDIR):
-	mkdir -m 755 -p $@
-$(MANDIR)/man8:
-	mkdir -m 755 -p $@
-$(ETCDIR):
-	mkdir -m 755 -p $@
-
-clean:
-	rm -f *~
-	cd chat; $(MAKE) clean
-	cd pppd; $(MAKE) clean
-	cd pppstats; $(MAKE) clean
-	cd pppdump; $(MAKE) clean
-	cd svr4; $(MAKE) clean
-
diff --git a/mdk-stage1/ppp/svr4/ppp.Master b/mdk-stage1/ppp/svr4/ppp.Master
deleted file mode 100644
index 346db035b..000000000
--- a/mdk-stage1/ppp/svr4/ppp.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp	-	Sciof	ppp	0	0	1	128	-1
diff --git a/mdk-stage1/ppp/svr4/ppp.Node b/mdk-stage1/ppp/svr4/ppp.Node
deleted file mode 100644
index 7767ade71..000000000
--- a/mdk-stage1/ppp/svr4/ppp.Node
+++ /dev/null
@@ -1 +0,0 @@
-clone	ppp	c	ppp
diff --git a/mdk-stage1/ppp/svr4/ppp.System b/mdk-stage1/ppp/svr4/ppp.System
deleted file mode 100644
index e60c0eec3..000000000
--- a/mdk-stage1/ppp/svr4/ppp.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp	Y	1	0	0	0	0	0	0	0
diff --git a/mdk-stage1/ppp/svr4/ppp.conf b/mdk-stage1/ppp/svr4/ppp.conf
deleted file mode 100644
index e443a7aac..000000000
--- a/mdk-stage1/ppp/svr4/ppp.conf
+++ /dev/null
@@ -1 +0,0 @@
-name="ppp" parent="pseudo" instance=0;
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdl.Master b/mdk-stage1/ppp/svr4/ppp_ahdl.Master
deleted file mode 100644
index 4fde52596..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdl.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp_ahdl	-	iSf	phdl	0	0	1	1	-1
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdl.System b/mdk-stage1/ppp/svr4/ppp_ahdl.System
deleted file mode 100644
index f41a500f4..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdl.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp_ahdl	Y	1	0	0	0	0	0	0	0
diff --git a/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c b/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c
deleted file mode 100644
index f81be8abb..000000000
--- a/mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c
+++ /dev/null
@@ -1,49 +0,0 @@
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_ahdlcinfo;
-
-static struct fmodsw fsw = {
-    "ppp_ahdl",
-    &ppp_ahdlcinfo,
-    D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
-    &mod_strmodops,
-    "PPP async HDLC module",
-    &fsw
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modlstrmod,
-    NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/svr4/ppp_comp.Master b/mdk-stage1/ppp/svr4/ppp_comp.Master
deleted file mode 100644
index 78019064e..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp.Master
+++ /dev/null
@@ -1 +0,0 @@
-ppp_comp	-	iSf	pcmp	0	0	1	1	-1
diff --git a/mdk-stage1/ppp/svr4/ppp_comp.System b/mdk-stage1/ppp/svr4/ppp_comp.System
deleted file mode 100644
index e69d4a1a3..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp.System
+++ /dev/null
@@ -1 +0,0 @@
-ppp_comp	Y	1	0	0	0	0	0	0	0
diff --git a/mdk-stage1/ppp/svr4/ppp_comp_mod.c b/mdk-stage1/ppp/svr4/ppp_comp_mod.c
deleted file mode 100644
index 83ff8e252..000000000
--- a/mdk-stage1/ppp/svr4/ppp_comp_mod.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * ppp_comp_mod.c - modload support for PPP compression STREAMS module.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-
-extern struct streamtab ppp_compinfo;
-
-static struct fmodsw fsw = {
-    "ppp_comp",
-    &ppp_compinfo,
-    D_NEW | D_MP | D_MTQPAIR
-};
-
-extern struct mod_ops mod_strmodops;
-
-static struct modlstrmod modlstrmod = {
-    &mod_strmodops,
-    "PPP compression module",
-    &fsw
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modlstrmod,
-    NULL
-};
-
-/*
- * Entry points for modloading.
- */
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
diff --git a/mdk-stage1/ppp/svr4/ppp_mod.c b/mdk-stage1/ppp/svr4/ppp_mod.c
deleted file mode 100644
index a4b1538a5..000000000
--- a/mdk-stage1/ppp/svr4/ppp_mod.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * ppp_mod.c - modload support for PPP pseudo-device driver.
- *
- * Copyright (c) 1994 The Australian National University.
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation is hereby granted, provided that the above copyright
- * notice appears in all copies.  This software is provided without any
- * warranty, express or implied. The Australian National University
- * makes no representations about the suitability of this software for
- * any purpose.
- *
- * IN NO EVENT SHALL THE AUSTRALIAN NATIONAL UNIVERSITY BE LIABLE TO ANY
- * PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
- * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF
- * THE AUSTRALIAN NATIONAL UNIVERSITY HAVE BEEN ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * THE AUSTRALIAN NATIONAL UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE AUSTRALIAN NATIONAL UNIVERSITY HAS NO
- * OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS,
- * OR MODIFICATIONS.
- *
- * $Id$
- */
-
-/*
- * This file is used under Solaris 2.
- */
-
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <sys/conf.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-#include <sys/ksynch.h>
-
-#ifdef __STDC__
-#define __P(x)	x
-#else
-#define __P(x)	()
-#endif
-
-static int ppp_identify __P((dev_info_t *));
-static int ppp_attach __P((dev_info_t *, ddi_attach_cmd_t));
-static int ppp_detach __P((dev_info_t *, ddi_detach_cmd_t));
-static int ppp_devinfo __P((dev_info_t *, ddi_info_cmd_t, void *, void **));
-
-extern struct streamtab pppinfo;
-extern krwlock_t ppp_lower_lock;
-
-static dev_info_t *ppp_dip;
-
-static struct cb_ops cb_ppp_ops = {
-    nulldev, nulldev, nodev, nodev,	/* cb_open, ... */
-    nodev, nodev, nodev, nodev,		/* cb_dump, ... */
-    nodev, nodev, nodev, nochpoll,	/* cb_devmap, ... */
-    ddi_prop_op,			/* cb_prop_op */
-    &pppinfo,				/* cb_stream */
-    D_NEW|D_MP|D_MTQPAIR|D_MTOUTPERIM|D_MTOCEXCL	/* cb_flag */
-};
-
-static struct dev_ops ppp_ops = {
-    DEVO_REV,				/* devo_rev */
-    0,					/* devo_refcnt */
-    ppp_devinfo,			/* devo_getinfo */
-    ppp_identify,			/* devo_identify */
-    nulldev,				/* devo_probe */
-    ppp_attach,				/* devo_attach */
-    ppp_detach,				/* devo_detach */
-    nodev,				/* devo_reset */
-    &cb_ppp_ops,			/* devo_cb_ops */
-    NULL				/* devo_bus_ops */
-};
-
-/*
- * Module linkage information
- */
-
-static struct modldrv modldrv = {
-    &mod_driverops,			/* says this is a pseudo driver */
-    "PPP-2.3 multiplexing driver",
-    &ppp_ops				/* driver ops */
-};
-
-static struct modlinkage modlinkage = {
-    MODREV_1,
-    (void *) &modldrv,
-    NULL
-};
-
-int
-_init(void)
-{
-    return mod_install(&modlinkage);
-}
-
-int
-_fini(void)
-{
-    return mod_remove(&modlinkage);
-}
-
-int
-_info(mip)
-    struct modinfo *mip;
-{
-    return mod_info(&modlinkage, mip);
-}
-
-static int
-ppp_identify(dip)
-    dev_info_t *dip;
-{
-    return strcmp(ddi_get_name(dip), "ppp") == 0? DDI_IDENTIFIED:
-	DDI_NOT_IDENTIFIED;
-}
-
-static int
-ppp_attach(dip, cmd)
-    dev_info_t *dip;
-    ddi_attach_cmd_t cmd;
-{
-
-    if (cmd != DDI_ATTACH)
-	return DDI_FAILURE;
-    if (ddi_create_minor_node(dip, "ppp", S_IFCHR, 0, DDI_PSEUDO, CLONE_DEV)
-	== DDI_FAILURE) {
-	ddi_remove_minor_node(dip, NULL);
-	return DDI_FAILURE;
-    }
-    rw_init(&ppp_lower_lock, NULL, RW_DRIVER, NULL);
-    return DDI_SUCCESS;
-}
-
-static int
-ppp_detach(dip, cmd)
-    dev_info_t *dip;
-    ddi_detach_cmd_t cmd;
-{
-    rw_destroy(&ppp_lower_lock);
-    ddi_remove_minor_node(dip, NULL);
-    return DDI_SUCCESS;
-}
-
-static int
-ppp_devinfo(dip, cmd, arg, result)
-    dev_info_t *dip;
-    ddi_info_cmd_t cmd;
-    void *arg;
-    void **result;
-{
-    int error;
-
-    error = DDI_SUCCESS;
-    switch (cmd) {
-    case DDI_INFO_DEVT2DEVINFO:
-	if (ppp_dip == NULL)
-	    error = DDI_FAILURE;
-	else
-	    *result = (void *) ppp_dip;
-	break;
-    case DDI_INFO_DEVT2INSTANCE:
-	*result = NULL;
-	break;
-    default:
-	error = DDI_FAILURE;
-    }
-    return error;
-}
diff --git a/mdk-stage1/probing.c b/mdk-stage1/probing.c
deleted file mode 100644
index 88c634cbc..000000000
--- a/mdk-stage1/probing.c
+++ /dev/null
@@ -1,899 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-
-/*
- * This contains stuff related to probing:
- * (1) any (actually only SCSI, NET, CPQ, USB Controllers) devices (autoprobe for PCI and USB)
- * (2) IDE media
- * (3) SCSI media
- * (4) ETH devices
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <sys/socket.h>
-#include <net/if.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <pci/pci.h>
-#include "stage1.h"
-
-#include "log.h"
-#include "frontend.h"
-#include "modules.h"
-#include "pci-resource/pci-ids.h"
-#ifdef ENABLE_USB
-#include "usb-resource/usb-ids.h"
-#endif
-
-#include "probing.h"
-
-
-struct media_info {
-	char * name;
-	char * model;
-	enum media_type type;
-};
-
-
-static void warning_insmod_failed(enum insmod_return r)
-{
-	if (IS_AUTOMATIC && r == INSMOD_FAILED_FILE_NOT_FOUND)
-		return;
-	if (r != INSMOD_OK) {
-		if (r == INSMOD_FAILED_FILE_NOT_FOUND)
-			stg1_error_message("This floppy doesn't contain the driver.");
-		else
-			stg1_error_message("Warning, installation of driver failed. (please include msg from <Alt-F3> for bugreports)");
-	}
-}
-
-#ifndef DISABLE_NETWORK
-struct net_description_elem
-{
-	char * intf_name;
-	char * intf_description;
-};
-static struct net_description_elem net_descriptions[50];
-static int net_descr_number = 0;
-static char * intf_descr_for_discover = NULL;
-static char * net_intf_too_early_name[50]; /* for modules providing more than one net intf */
-static int net_intf_too_early_number = 0;
-static int net_intf_too_early_ptr = 0;
-
-void prepare_intf_descr(const char * intf_descr)
-{
-	intf_descr_for_discover = strdup(intf_descr);
-}
-
-void net_discovered_interface(char * intf_name)
-{
-	if (!intf_descr_for_discover) {
-		net_intf_too_early_name[net_intf_too_early_number++] = strdup(intf_name);
-		return;
-	}
-	if (!intf_name) {
-		if (net_intf_too_early_ptr >= net_intf_too_early_number) {
-			log_message("NET: was expecting another network interface (broken net module?)");
-			return;
-		}
-		net_descriptions[net_descr_number].intf_name = net_intf_too_early_name[net_intf_too_early_ptr++];
-	}
-	else
-		net_descriptions[net_descr_number].intf_name = strdup(intf_name);
-	net_descriptions[net_descr_number].intf_description = strdup(intf_descr_for_discover);
-	intf_descr_for_discover = NULL;
-	net_descr_number++;
-}
-
-char * get_net_intf_description(char * intf_name)
-{
-	int i;
-	for (i = 0; i < net_descr_number ; i++)
-		if (!strcmp(net_descriptions[i].intf_name, intf_name))
-			return net_descriptions[i].intf_description;
-	return strdup("unknown");
-}
-#endif
-
-struct pcitable_entry detected_devices[50];
-int detected_devices_len = 0;
-
-/* FIXME: factorize with probe_that_type() */
-
-static void add_detected_device(unsigned short vendor, unsigned short device, const char *name, const char *module)
-{
-	struct pcitable_entry *dev = &detected_devices[detected_devices_len++];
-	dev->vendor = vendor;
-	dev->device = device;
-	strncpy(dev->module, module, 19);
-	dev->module[19] = '\0';
-	strncpy(dev->description, name, 99);
-	dev->description[99] = '\0';
-	log_message("detected device (%x, %x, %s, %s)", vendor, device, name, module);
-}
-
-static int check_device_full(struct pci_module_map_full * pcidb_full, unsigned int len_full,
-			     unsigned short vendor, unsigned short device,
-			     unsigned short subvendor, unsigned short subdevice)
-{
-	int i;
-	for (i = 0; i < len_full; i++)
-		if (pcidb_full[i].vendor == vendor && pcidb_full[i].device == device) {
-			if (pcidb_full[i].subvendor == subvendor && pcidb_full[i].subdevice == subdevice) {
-				add_detected_device(pcidb_full[i].vendor, pcidb_full[i].device,
-						    pcidb_full[i].name, pcidb_full[i].module);
-				return 1;
-			}
-		}
-	return 0;
-}
-
-static int check_device(struct pci_module_map * pcidb, unsigned int len,
-			unsigned short vendor, unsigned short device) {
-	int i;
-	for (i = 0; i < len; i++)
-		if (pcidb[i].vendor == vendor && pcidb[i].device == device) {
-			add_detected_device(pcidb[i].vendor, pcidb[i].device,
-					    pcidb[i].name, pcidb[i].module);
-			return 1;
-		}
-	return 0;
-}
-
-void probing_detect_devices()
-{
-	FILE * f = NULL;
-	char buf[200];
-        static int already_detected_devices = 0;
-
-	if (already_detected_devices)
-		return;
-
-	if (!(f = fopen("/proc/bus/pci/devices", "rb"))) {
-		log_message("PCI: could not open proc file");
-		return;
-	}
-
-	while (1) {
-		unsigned int i;
-		unsigned short vendor, device, subvendor, subdevice, devbusfn;
-		if (!fgets(buf, sizeof(buf), f)) break;
-		sscanf(buf, "%hx %x", &devbusfn, &i);
-		device = i;
-		vendor = i >> 16;
-		{
-			int bus = devbusfn >> 8;
-			int device_p = (devbusfn & 0xff) >> 3;
-			int function = (devbusfn & 0xff) & 0x07;
-			char file[100];
-			int sf;
-			sprintf(file, "/proc/bus/pci/%02x/%02x.%d", bus, device_p, function);
-			if ((sf = open(file, O_RDONLY)) == -1) {
-				log_message("PCI: could not open file for full probe (%s)", file);
-				continue;
-			}
-			if (read(sf, buf, 48) == -1) {
-				log_message("PCI: could not read 48 bytes from %s", file);
-				close(sf);
-				continue;
-			}
-			close(sf);
-			memcpy(&subvendor, buf+44, 2);
-			memcpy(&subdevice, buf+46, 2);
-		}
-
-
-#ifndef DISABLE_PCIADAPTERS
-#ifndef DISABLE_MEDIAS
-		if (check_device_full(medias_pci_ids_full, medias_num_ids_full, vendor, device, subvendor, subdevice))
-			continue;
-		if (check_device(medias_pci_ids, medias_num_ids, vendor, device))
-			continue;
-#endif
-
-#ifndef DISABLE_NETWORK
-		if (check_device_full(network_pci_ids_full, network_num_ids_full, vendor, device, subvendor, subdevice))
-			continue;
-		if (check_device(network_pci_ids, network_num_ids, vendor, device))
-			continue;
-#endif
-#endif
-
-#ifdef ENABLE_USB
-		if (check_device(usb_pci_ids, usb_num_ids, vendor, device))
-			continue;
-#endif
-
-		/* device can't be found in built-in pcitables, but keep it */
-		add_detected_device(vendor, device, "", "");
-	}
-
-	fclose(f);
-	already_detected_devices = 1;
-}
-
-void discovered_device(enum driver_type type,
-		       unsigned short vendor, unsigned short device, unsigned short subvendor, unsigned short subdevice,
-		       const char * description, const char * driver)
-{
-	enum insmod_return failed = INSMOD_FAILED;
-	log_message("PCI: device %04x %04x %04x %04x is \"%s\", driver is %s", vendor, device, subvendor, subdevice, description, driver);
-#ifndef DISABLE_MEDIAS
-	if (type == SCSI_ADAPTERS) {
-		wait_message("Loading driver for SCSI adapter:\n \n%s", description);
-		failed = my_insmod(driver, SCSI_ADAPTERS, NULL, 1);
-		remove_wait_message();
-		warning_insmod_failed(failed);
-	}
-#endif
-#ifndef DISABLE_NETWORK
-	if (type == NETWORK_DEVICES) {
-		wait_message("Loading driver for network device:\n \n%s", description);
-		prepare_intf_descr(description);
-		failed = my_insmod(driver, NETWORK_DEVICES, NULL, 1);
-		warning_insmod_failed(failed);
-		remove_wait_message();
-		if (intf_descr_for_discover) /* for modules providing more than one net intf */
-			net_discovered_interface(NULL);
-	}
-#endif
-#ifdef ENABLE_USB
-	if (type == USB_CONTROLLERS)
-                /* we can't allow additional modules floppy since we need usbkbd for keystrokes of usb keyboards */
-		failed = my_insmod(driver, USB_CONTROLLERS, NULL, 0);
-#endif
-}
-
-#ifdef ENABLE_USB
-void probe_that_type(enum driver_type type, enum media_bus bus)
-#else
-void probe_that_type(enum driver_type type, enum media_bus bus __attribute__ ((unused)))
-#endif
-{
-        static int already_probed_usb_controllers = 0;
-        static int already_loaded_usb_scsi = 0;
-
-	/* ---- PCI probe ---------------------------------------------- */
-	{
-		FILE * f = NULL;
-		unsigned int len = 0;
-		unsigned int len_full = 0;
-		char buf[200];
-		struct pci_module_map * pcidb = NULL;
-		struct pci_module_map_full * pcidb_full = NULL;
-
-		switch (type) {
-#ifndef DISABLE_PCIADAPTERS
-#ifndef DISABLE_MEDIAS
-			static int already_probed_scsi_adapters = 0;
-		case SCSI_ADAPTERS:
-			if (already_probed_scsi_adapters)
-				goto end_pci_probe;
-			already_probed_scsi_adapters = 1;
-			pcidb = medias_pci_ids;
-			len   = medias_num_ids;
-			pcidb_full = medias_pci_ids_full;
-			len_full   = medias_num_ids_full;
-			break;
-#endif
-#ifndef DISABLE_NETWORK
-		case NETWORK_DEVICES:
-			pcidb = network_pci_ids;
-			len   = network_num_ids;
-			pcidb_full = network_pci_ids_full;
-			len_full   = network_num_ids_full;
-			break;
-#endif
-#endif
-#ifdef ENABLE_USB
-		case USB_CONTROLLERS:
-			if (already_probed_usb_controllers || IS_NOAUTO)
-				goto end_pci_probe;
-			already_probed_usb_controllers = 1;
-			pcidb = usb_pci_ids;
-			len   = usb_num_ids;
-			break;
-#endif
-		default:
-			goto end_pci_probe;
-		}
-
-		if (!(f = fopen("/proc/bus/pci/devices", "rb"))) {
-			log_message("PCI: could not open proc file");
-			goto end_pci_probe;
-		}
-
-		while (1) {
-			unsigned int i;
-			unsigned short vendor, device, subvendor, subdevice, class_, class_prog, devbusfn;
-			const char *name, *module;
-			enum driver_type type_ = type;
-
-			if (!fgets(buf, sizeof(buf), f)) break;
-	
-			sscanf(buf, "%hx %x", &devbusfn, &i);
-			device = i;
-			vendor = i >> 16;
-
-			{
-				int bus = devbusfn >> 8;
-				int device_p = (devbusfn & 0xff) >> 3;
-				int function = (devbusfn & 0xff) & 0x07;
-				char file[100];
-				int sf;
-				sprintf(file, "/proc/bus/pci/%02x/%02x.%d", bus, device_p, function);
-				if ((sf = open(file, O_RDONLY)) == -1) {
-					log_message("PCI: could not open file for full probe (%s)", file);
-					continue;
-				}
-				if (read(sf, buf, 48) == -1) {
-					log_message("PCI: could not read 48 bytes from %s", file);
-					close(sf);
-					continue;
-				}
-				close(sf);
-				memcpy(&class_prog, buf+9, 1);
-				memcpy(&class_, buf+10, 2);
-				memcpy(&subvendor, buf+44, 2);
-				memcpy(&subdevice, buf+46, 2);
-			}
-
-			/* special rules below must be in sync with ldetect/pci.c */
-
-			if (class_ == PCI_CLASS_SERIAL_USB) {
-				/* taken from kudzu's pci.c */
-				module = 
-					class_prog == 0 ? "usb-uhci" : 
-					class_prog == 0x10 ? "usb-ohci" :
-					class_prog == 0x20 ? "ehci-hcd" : NULL;
-				if (module) {
-					name = "USB Controller";
-					type_ = USB_CONTROLLERS;
-					goto found_pci_device;
-				}
-			}
-			if (class_ == PCI_CLASS_SERIAL_FIREWIRE) {
-				/* taken from kudzu's pci.c */
-				if (class_prog == 0x10) {
-					module = strdup("ohci1394");
-					name = "Firewire Controller";
-					goto found_pci_device;
-				}
-			}
-
-			for (i = 0; i < len_full; i++)
-				if (pcidb_full[i].vendor == vendor && pcidb_full[i].device == device) {
-					if (pcidb_full[i].subvendor == subvendor && pcidb_full[i].subdevice == subdevice) {
-						name = pcidb_full[i].name;
-						module = pcidb_full[i].module;
-						goto found_pci_device;
-					}
-				}
-			
-			for (i = 0; i < len; i++)
-				if (pcidb[i].vendor == vendor && pcidb[i].device == device) {
-					name = pcidb[i].name;
-					module = pcidb[i].module;
-					goto found_pci_device;
-				}
-
-			continue;
-
-		found_pci_device:
-			discovered_device(type_, vendor, device, subvendor, subdevice, name, module);
-		}
-	end_pci_probe:;
-		if (f)
-                        fclose(f);
-	}
-
-
-#ifdef ENABLE_USB
-	/* ---- USB probe ---------------------------------------------- */
-	if ((bus == BUS_USB || bus == BUS_ANY) && !(IS_NOAUTO)) {
-		static int already_mounted_usbdev = 0;
-
-		FILE * f = NULL;
-		int len = 0;
-		char buf[200];
-		struct usb_module_map * usbdb = NULL;
-
-		if (!already_probed_usb_controllers) {
-			already_probed_usb_controllers = 1;
-			probe_that_type(USB_CONTROLLERS, BUS_ANY);
-		}
-
-		if (!already_mounted_usbdev) {
-			already_mounted_usbdev = 1;
-			if (mount("none", "/proc/bus/usb", "usbfs", 0, NULL) &&
-			    mount("none", "/proc/bus/usb", "usbdevfs", 0, NULL)) {
-				log_message("USB: couldn't mount /proc/bus/usb");
-				goto end_usb_probe;
-			}
-			wait_message("Detecting USB devices.");
-			sleep(4); /* sucking background work */
-			my_insmod("usbkbd", ANY_DRIVER_TYPE, NULL, 0);
-			my_insmod("keybdev", ANY_DRIVER_TYPE, NULL, 0);
-			remove_wait_message();
-		}
-
-		if (!(f = fopen("/proc/bus/usb/devices", "rb"))) {
-			log_message("USB: could not open proc file");
-			goto end_usb_probe;
-		}
-
-		switch (type) {
-		case NETWORK_DEVICES:
-			usbdb = usb_usb_ids;
-			len   = usb_usb_num_ids;
-			break;
-		default:
-			goto end_usb_probe;
-		}
-
-		while (1) {
-			int i, vendor, id;
-
-			if (!fgets(buf, sizeof(buf), f)) break;
-
-			if (sscanf(buf, "P:  Vendor=%x ProdID=%x", &vendor, &id) != 2)
-				continue;
-
-			for (i = 0; i < len; i++) {
-				if (usbdb[i].vendor == vendor && usbdb[i].id == id) {
-					log_message("USB: device %04x %04x is \"%s\" (%s)", vendor, id, usbdb[i].name, usbdb[i].module);
-#ifndef DISABLE_NETWORK
-					if (type == NETWORK_DEVICES) {
-						stg1_info_message("About to load driver for usb network device:\n \n%s", usbdb[i].name);
-						prepare_intf_descr(usbdb[i].name);
-						warning_insmod_failed(my_insmod(usbdb[i].module, NETWORK_DEVICES, NULL, 1));
-						if (intf_descr_for_discover) /* for modules providing more than one net intf */
-							net_discovered_interface(NULL);
-					}
-#endif
-
-				}
-			}
-		}
-	end_usb_probe:;
-		if (f)
-                        fclose(f);
-	}
-#endif
-
-        /* be sure to load usb-storage after SCSI adapters, so that they are in
-           same order than reboot, so that naming is the same */
-        if (type == SCSI_ADAPTERS && already_probed_usb_controllers && !already_loaded_usb_scsi) {
-                already_loaded_usb_scsi = 1;
-                /* we can't allow additional modules floppy since we need usbkbd for keystrokes of usb keyboards */
-                my_insmod("usb-storage", SCSI_ADAPTERS, NULL, 0); 
-                if (module_already_present("ieee1394"))
-                        my_insmod("sbp2", SCSI_ADAPTERS, NULL, 0);
-                wait_message("Detecting USB mass-storage devices.");
-                sleep(10); /* sucking background work */
-                remove_wait_message();
-        }
-}
-
-
-static struct media_info * medias = NULL;
-
-static void find_media(enum media_bus bus)
-{
-    	char b[50];
-	char buf[5000];
-	struct media_info tmp[50];
-	int count = 0;
-        int fd;
-
-	if (medias)
-		free(medias); /* that does not free the strings, by the way */
-
-	if (bus == BUS_SCSI || bus == BUS_USB || bus == BUS_ANY) {
-                log_message("looking for SCSI adapters");
-                probe_that_type(SCSI_ADAPTERS, bus);
-        }
-	/* ----------------------------------------------- */
-	if (bus != BUS_IDE && bus != BUS_ANY)
-		goto find_media_after_ide;
-	log_message("looking for ide media");
-
-    	strcpy(b, "/proc/ide/hd");
-    	for (b[12] = 'a'; b[12] <= 't'; b[12]++) {
-		int i;
-		char ide_disk[] = "disk";
-		char ide_cdrom[] = "cdrom";
-		char ide_tape[] = "tape";
-		char ide_floppy[] = "floppy";
-		
-		/* first, test if file exists (will tell if attached medium exists) */
-		b[13] = '\0';
-		if (access(b, R_OK))
-			continue;
-
-		tmp[count].name = strdup("hda");
-		tmp[count].name[2] = b[12];
-
-		/* media type */
-		strcpy(b + 13, "/media");
-		fd = open(b, O_RDONLY);
-		if (fd == -1) {
-			log_message("failed to open %s for reading", b);
-			continue;
-		}
-
-		i = read(fd, buf, sizeof(buf));
-		if (i == -1) {
-			log_message("failed to read %s", b);
-			continue;
-		}
-		buf[i] = '\0';
-		close(fd);
-
-		if (ptr_begins_static_str(buf, ide_disk))
-			tmp[count].type = DISK;
-		else if (ptr_begins_static_str(buf, ide_cdrom))
-			tmp[count].type = CDROM;
-		else if (ptr_begins_static_str(buf, ide_tape))
-			tmp[count].type = TAPE;
-		else if (ptr_begins_static_str(buf, ide_floppy))
-			tmp[count].type = FLOPPY;
-		else
-			tmp[count].type = UNKNOWN_MEDIA;
-
-		/* media model */
-		strcpy(b + 13, "/model");
-		fd = open(b, O_RDONLY);
-		if (fd == -1) {
-			log_message("failed to open %s for reading", b);
-			continue;
-		}
-
-		i = read(fd, buf, sizeof(buf));
-		if (i <= 0) {
-			log_message("failed to read %s", b);
-			tmp[count].model = strdup("(none)");
-		}
-		else {
-			buf[i-1] = '\0'; /* eat the \n */
-			tmp[count].model = strdup(buf);
-		}
-		close(fd);
-
-		log_message("IDE/%d: %s is a %s", tmp[count].type, tmp[count].name, tmp[count].model);
-		count++;
-    	}
-
- find_media_after_ide:
-	/* ----------------------------------------------- */
-	if (bus != BUS_SCSI && bus != BUS_USB && bus != BUS_ANY)
-		goto find_media_after_scsi;
-	log_message("looking for scsi media");
-
-	fd = open("/proc/scsi/scsi", O_RDONLY);
-	if (fd != -1) {
-                FILE * f;
-
-		enum { SCSI_TOP, SCSI_HOST, SCSI_VENDOR, SCSI_TYPE } state = SCSI_TOP;
-		char * start, * chptr, * next, * end;
-		char scsi_disk_count = 'a';
-		char scsi_cdrom_count = '0';
-		char scsi_tape_count = '0';
-
-		char scsi_no_devices[] = "Attached devices: none";
-		char scsi_some_devices[] = "Attached devices:";
-		char scsi_host[] = "Host: ";
-		char scsi_vendor[] = "  Vendor: ";
-
-		int i = read(fd, &buf, sizeof(buf)-1);
-		if (i < 1) {
-			close(fd);
-			goto end_scsi;
-		}
-		close(fd);
-		buf[i] = '\0';
-
-		if (ptr_begins_static_str(buf, scsi_no_devices))
-			goto end_scsi;
-		
-		start = buf;
-		while (*start) {
-			char tmp_model[50];
-			char tmp_name[10];
-
-			chptr = start;
-			while (*chptr != '\n') chptr++;
-			*chptr = '\0';
-			next = chptr + 1;
-			
-			switch (state) {
-			case SCSI_TOP:
-				if (!ptr_begins_static_str(start, scsi_some_devices))
-					goto end_scsi;
-				state = SCSI_HOST;
-				break;
-
-			case SCSI_HOST:
-				if (!ptr_begins_static_str(start, scsi_host))
-					goto end_scsi;
-				state = SCSI_VENDOR;
-				break;
-
-			case SCSI_VENDOR:
-				if (!ptr_begins_static_str(start, scsi_vendor))
-					goto end_scsi;
-
-				/* (1) Grab Vendor info */
-				start += 10;
-				end = chptr = strstr(start, "Model:");
-				if (!chptr)
-					goto end_scsi;
-
-				chptr--;
-				while (*chptr == ' ')
-					chptr--;
-				if (*chptr == ':') {
-					chptr++;
-					*(chptr + 1) = '\0';
-					strcpy(tmp_model,"(unknown)");
-				} else {
-					*(chptr + 1) = '\0';
-					strcpy(tmp_model, start);
-				}
-
-				/* (2) Grab Model info */
-				start = end;
-				start += 7;
-				
-				chptr = strstr(start, "Rev:");
-				if (!chptr)
-					goto end_scsi;
-				
-				chptr--;
-				while (*chptr == ' ') chptr--;
-				*(chptr + 1) = '\0';
-				
-				strcat(tmp_model, " ");
-				strcat(tmp_model, start);
-
-				tmp[count].model = strdup(tmp_model);
-				
-				state = SCSI_TYPE;
-
-				break;
-
-			case SCSI_TYPE:
-				if (strncmp("  Type:", start, 7))
-					goto end_scsi;
-				*tmp_name = '\0';
-
-				if (strstr(start, "Direct-Access")) {
-					sprintf(tmp_name, "sd%c", scsi_disk_count++);
-					tmp[count].type = DISK;
-				} else if (strstr(start, "Sequential-Access")) {
-					sprintf(tmp_name, "st%c", scsi_tape_count++);
-					tmp[count].type = TAPE;
-				} else if (strstr(start, "CD-ROM")) {
-					sprintf(tmp_name, "sr%c", scsi_cdrom_count++);
-					tmp[count].type = CDROM;
-				}
-
-                                if (!(f = fopen("/proc/partitions", "rb")) || !fgets(buf, sizeof(buf), f) || !fgets(buf, sizeof(buf), f)) {
-                                        log_message("Couldn't open /proc/partitions");
-                                } else {
-                                        while (fgets(buf, sizeof(buf), f)) {
-                                                char name[100];
-                                                int major, minor, blocks;
-                                                memset(name, 0, sizeof(name));
-                                                sscanf(buf, " %d %d %d %s", &major, &minor, &blocks, name);
-                                                if (streq(name, tmp_name) && tmp[count].type == DISK && ((blocks == 1048575) || (blocks == 1440)))
-                                                        tmp[count].type = FLOPPY;
-                                        }
-                                        fclose(f);
-                                }
-
-				if (*tmp_name) {
-					tmp[count].name = strdup(tmp_name);
-					log_message("SCSI/%d: %s is a %s", tmp[count].type, tmp[count].name, tmp[count].model);
-					count++;
-				}
-				
-				state = SCSI_HOST;
-			}
-			
-			start = next;
-		}
-		
-	end_scsi:;
-	}
-
-	/* ----------------------------------------------- */
-	log_message("looking for Compaq Smart Array media");
-	{
-		char * procfiles[] = { "/proc/driver/cpqarray/ida0", "/proc/driver/cciss/cciss0", // 2.4 style
-				       "/proc/array/ida", "/proc/cciss/cciss",                 // 2.2 style
-				       NULL };
-		static char cpq_descr[] = "Compaq RAID logical disk";
-		char ** procfile = procfiles;
-		FILE * f;
-		while (procfile && *procfile && (f = fopen(*procfile, "rb"))) {
-			while (fgets(buf, sizeof(buf), f)) {
-				if (ptr_begins_static_str(buf, "ida/") || ptr_begins_static_str(buf, "cciss/")) {
-					char * end = strchr(buf, ':');
-					if (!end)
-						log_message("Inconsistency in %s, line:\n%s", *procfile, buf);
-					else {
-						*end = '\0';
-						tmp[count].name = strdup(buf);
-						tmp[count].type = DISK;
-						tmp[count].model = cpq_descr;
-						log_message("CPQ: found %s", tmp[count].name);
-						count++;
-					}
-				}
-			}
-			fclose(f);
-			procfile++;
-		}
-	}
-
-	/* ----------------------------------------------- */
-	log_message("looking for DAC960");
-	{
-		FILE * f;
-		if ((f = fopen("/tmp/syslog", "rb"))) {
-			while (fgets(buf, sizeof(buf), f)) {
-				char * start;
-				if ((start = strstr(buf, "/dev/rd/"))) {
-					char * end = strchr(start, ':');
-					if (!end)
-						log_message("Inconsistency in syslog, line:\n%s", buf);
-					else {
-						*end = '\0';
-						tmp[count].name = strdup(start+5);
-						tmp[count].type = DISK;
-						start = end + 2;
-						end = strchr(start, ',');
-						if (end) {
-							*end = '\0';
-							tmp[count].model = strdup(start);
-						} else
-							tmp[count].model = "(unknown)";
-						log_message("DAC960: found %s (%s)", tmp[count].name, tmp[count].model);
-						count++;
-					}
-				}
-			}
-			fclose(f);
-		}
-	}
- find_media_after_scsi:
-
-	/* ----------------------------------------------- */
-	tmp[count].name = NULL;
-	count++;
-
-	medias = memdup(tmp, sizeof(struct media_info) * count);
-}
-
-
-/* Finds by media */
-void get_medias(enum media_type media, char *** names, char *** models, enum media_bus bus)
-{
-	struct media_info * m;
-	char * tmp_names[50];
-	char * tmp_models[50];
-	int count;
-
-	find_media(bus);
-
-	m = medias;
-
-	count = 0;
-	while (m && m->name) {
-		if (m->type == media) {
-			tmp_names[count] = strdup(m->name);
-			tmp_models[count++] = strdup(m->model);
-		}
-		m++;
-	}
-	tmp_names[count] = NULL;
-	tmp_models[count++] = NULL;
-
-	*names = memdup(tmp_names, sizeof(char *) * count);
-	*models = memdup(tmp_models, sizeof(char *) * count);
-}
-
-
-#ifndef DISABLE_NETWORK
-static int is_net_interface_blacklisted(char *intf)
-{
-	/* see detect_devicess::is_lan_interface() */
-	char * blacklist[] = { "lo", "ippp", "isdn", "plip", "ppp", "wifi", "sit", NULL };
-	char ** ptr = blacklist;
-
-	while (ptr && *ptr) {
-		if (!strncmp(intf, *ptr, strlen(*ptr)))
-			return 1;
-		ptr++;
-	}
-
-	return 0;
-}
-
-char ** get_net_devices(void)
-{
-	char * tmp[50];
-	static int already_probed = 0;
-	FILE * f;
-	int i = 0;
-
-	if (!already_probed) {
-		already_probed = 1; /* cut off loop brought by: probe_that_type => my_insmod => get_net_devices */
-		probe_that_type(NETWORK_DEVICES, BUS_ANY);
-	}
-
-	/* use /proc/net/dev since SIOCGIFCONF doesn't work with some drivers (rt2500) */
-	f = fopen("/proc/net/dev", "rb");
-	if (f) {
-		char line[128];
-
-		/* skip the two first lines */
-		fgets(line, sizeof(line), f);
-		fgets(line, sizeof(line), f);
-
-		while (1) {
-			char *start, *end;
-			if (!fgets(line, sizeof(line), f))
-				break;
-			start = line;
-			while (*start == ' ')
-				start++;
-			end = strchr(start, ':');
-			if (end)
-				end[0] = '\0';
-			if (!is_net_interface_blacklisted(start)) {
-				log_message("found net interface %s", start);
-				tmp[i++] = strdup(start);
-			} else {
-				log_message("found net interface %s, but blacklisted", start);
-			}
-		}
-
-		fclose(f);
-	} else {
-		log_message("net: could not open devices file");
-	}
-
-	tmp[i++] = NULL;
-
-	return memdup(tmp, sizeof(char *) * i);
-
-}
-#endif /* DISABLE_NETWORK */
diff --git a/mdk-stage1/probing.h b/mdk-stage1/probing.h
deleted file mode 100644
index 6efa7b464..000000000
--- a/mdk-stage1/probing.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _PROBING_H_
-#define _PROBING_H_
-
-enum media_type { CDROM, DISK, FLOPPY, TAPE, UNKNOWN_MEDIA };
-
-enum driver_type { SCSI_ADAPTERS, NETWORK_DEVICES, USB_CONTROLLERS, ANY_DRIVER_TYPE };
-
-enum media_bus { BUS_IDE, BUS_SCSI, BUS_USB, BUS_ANY };
-
-void get_medias(enum media_type media, char *** names, char *** models, enum media_bus bus);
-char ** get_net_devices(void);
-void net_discovered_interface(char * intf_name);
-char * get_net_intf_description(char * intf_name);
-void prepare_intf_descr(const char * intf_descr);
-void probe_that_type(enum driver_type type, enum media_bus bus);
-
-struct pcitable_entry {
-	/* some bits stolen from pci-resource/pci-ids.h
-	 * FIXME: split pci-ids.h into pci-ids.c and pci-ids.h so that the header can be re-used
-	 */
-	unsigned short	vendor;       /* PCI vendor id */
-	unsigned short	device;       /* PCI device id */
-	char      module[20];      /* module to load */
-	char      description[100]; /* PCI human readable description */
-};
-extern struct pcitable_entry detected_devices[50];
-extern int detected_devices_len;
-void probing_detect_devices();
-
-#endif
diff --git a/mdk-stage1/rescue-gui.c b/mdk-stage1/rescue-gui.c
deleted file mode 100644
index be63229e8..000000000
--- a/mdk-stage1/rescue-gui.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2001 Mandrakesoft
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#define _USE_BSD
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/wait.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <sys/mount.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <linux/unistd.h>
-#include <sys/select.h>
-
-#include "config-stage1.h"
-#include "frontend.h"
-#include "tools.h"
-
-#if defined(__i386__) || defined(__x86_64__)
-#define ENABLE_RESCUE_MS_BOOT 1
-#endif
-
-char * env[] = {
-	"PATH=/usr/bin:/bin:/sbin:/usr/sbin:/mnt/sbin:/mnt/usr/sbin:/mnt/bin:/mnt/usr/bin",
-	"LD_LIBRARY_PATH=/lib:/usr/lib:/mnt/lib:/mnt/usr/lib:/usr/X11R6/lib:/mnt/usr/X11R6/lib"
-#if defined(__x86_64__) || defined(__ppc64__)
-	":/lib64:/usr/lib64:/usr/X11R6/lib64:/mnt/lib64:/mnt/usr/lib64:/mnt/usr/X11R6/lib64"
-#endif
-	,
-	"HOME=/",
-	"TERM=linux",
-	"TERMINFO=/etc/terminfo",
-	NULL
-};
-
-/* pause() already exists and causes the invoking process to sleep
-   until a signal is received */
-static void PAUSE(void) {
-  unsigned char t;
-  fflush(stdout);
-  read(0, &t, 1);
-}
-
-
-/* ------ UUURGH this is duplicated from `init.c', don't edit here........ */
-static inline _syscall3(int, reboot, int, magic, int, magic2, int, flag);
-#define LOOP_CLR_FD	0x4C01
-void del_loop(char *device) 
-{
-	int fd;
-	if ((fd = open(device, O_RDONLY, 0)) < 0) {
-		printf("del_loop open failed\n");
-		return;
-	}
-
-	if (ioctl(fd, LOOP_CLR_FD, 0) < 0) {
-		printf("del_loop ioctl failed");
-		return;
-	}
-
-	close(fd);
-}
-struct filesystem { char * dev; char * name; char * fs; int mounted; };
-void unmount_filesystems(void)
-{
-	int fd, size;
-	char buf[65535];			/* this should be big enough */
-	char *p;
-	struct filesystem fs[500];
-	int numfs = 0;
-	int i, nb;
-	
-	printf("unmounting filesystems...\n"); 
-	
-	fd = open("/proc/mounts", O_RDONLY, 0);
-	if (fd < 1) {
-		printf("ERROR: failed to open /proc/mounts");
-		sleep(2);
-		return;
-	}
-
-	size = read(fd, buf, sizeof(buf) - 1);
-	buf[size] = '\0';
-
-	close(fd);
-
-	p = buf;
-	while (*p) {
-		fs[numfs].mounted = 1;
-		fs[numfs].dev = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		fs[numfs].name = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		fs[numfs].fs = p;
-		while (*p != ' ') p++;
-		*p++ = '\0';
-		while (*p != '\n') p++;
-		p++;
-		if (strcmp(fs[numfs].name, "/") != 0) numfs++; /* skip if root, no need to take initrd root in account */
-	}
-
-	/* Pixel's ultra-optimized sorting algorithm:
-	   multiple passes trying to umount everything until nothing moves
-	   anymore (a.k.a holy shotgun method) */
-	do {
-		nb = 0;
-		for (i = 0; i < numfs; i++) {
-			/*printf("trying with %s\n", fs[i].name);*/
-			if (fs[i].mounted && umount(fs[i].name) == 0) { 
-				if (strncmp(fs[i].dev + sizeof("/dev/") - 1, "loop",
-					    sizeof("loop") - 1) == 0)
-					del_loop(fs[i].dev);
-				
-				printf("\t%s\n", fs[i].name);
-				fs[i].mounted = 0;
-				nb++;
-			}
-		}
-	} while (nb);
-	
-	for (i = nb = 0; i < numfs; i++)
-		if (fs[i].mounted) {
-			printf("\t%s umount failed\n", fs[i].name);
-			if (strcmp(fs[i].fs, "ext2") == 0) nb++; /* don't count not-ext2 umount failed */
-		}
-	
-	if (nb) {
-		printf("failed to umount some filesystems\n");
-		while (1);
-	}
-}
-/* ------ UUURGH -- end */
-
-
-/* ------ UUURGH -- this is dirrrrrttttyyyyyy */
-void probe_that_type(void) {}
-
-
-int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)))
-{
-	enum return_type results;
-
-	char install_bootloader[] = "Re-install Boot Loader";
-#if ENABLE_RESCUE_MS_BOOT
-	char restore_ms_boot[] = "Restore Windows Boot Loader";
-#endif
-	char mount_parts[] = "Mount your partitions under /mnt";
-	char go_to_console[] = "Go to console";
-	char reboot_[] = "Reboot";
-	char doc[] = "Doc: what's addressed by this Rescue?";
-
-	char * actions[] = { install_bootloader,
-#if ENABLE_RESCUE_MS_BOOT
-			     restore_ms_boot,
-#endif
-			     mount_parts, go_to_console, reboot_, doc, NULL };
-	char * choice;
-
-	init_frontend("Welcome to " DISTRIB_NAME " Rescue (" DISTRIB_VERSION ") " __DATE__ " " __TIME__);
-
-	do {
-		int pid;
-		char * binary = NULL;
-
-		choice = "";
-		results = ask_from_list("Please choose the desired action.", actions, &choice);
-
-		if (ptr_begins_static_str(choice, install_bootloader)) {
-			binary = "/usr/bin/install_bootloader";
-		}
-#if ENABLE_RESCUE_MS_BOOT
-		if (ptr_begins_static_str(choice, restore_ms_boot)) {
-			binary = "/usr/bin/restore_ms_boot";
-		}
-#endif
-		if (ptr_begins_static_str(choice, mount_parts)) {
-			binary = "/usr/bin/guessmounts";
-		}
-		if (ptr_begins_static_str(choice, reboot_)) {
-			finish_frontend();
-                        sync(); sync();
-                        sleep(2);
-			unmount_filesystems();
-                        sync(); sync();
-			printf("rebooting system\n");
-			sleep(2);
-			reboot(0xfee1dead, 672274793, 0x01234567);
-		}
-		if (ptr_begins_static_str(choice, doc)) {
-			binary = "/usr/bin/rescue-doc";
-		}
-
-		if (binary) {
-			int wait_status;
-			suspend_to_console();
-			if (!(pid = fork())) {
-
-				char * child_argv[2];
-				child_argv[0] = binary;
-				child_argv[1] = NULL;
-
-				execve(child_argv[0], child_argv, env);
-				printf("Can't execute binary (%s)\n<press Enter>\n", binary);
-				PAUSE();
-
-				return 33;
-			}
-			while (wait4(-1, &wait_status, 0, NULL) != pid) {};
-			printf("<press Enter to return to Rescue GUI>");
-			PAUSE();
-			resume_from_suspend();
-			if (!WIFEXITED(wait_status) || WEXITSTATUS(wait_status) != 0) {
-				error_message("Program exited abnormally (return code %d).", WEXITSTATUS(wait_status));
-				if (WIFSIGNALED(wait_status))
-					error_message("(received signal %d)", WTERMSIG(wait_status));
-			}
-		}
-
-	} while (results == RETURN_OK && !ptr_begins_static_str(choice, go_to_console));
-
-	finish_frontend();
-	printf("Bye.\n");
-	
-	return 0;
-}
diff --git a/mdk-stage1/rp-pppoe/.cvsignore b/mdk-stage1/rp-pppoe/.cvsignore
deleted file mode 100644
index 1f345b56b..000000000
--- a/mdk-stage1/rp-pppoe/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-pppoe-bin
diff --git a/mdk-stage1/rp-pppoe/README b/mdk-stage1/rp-pppoe/README
deleted file mode 100644
index 269fc16be..000000000
--- a/mdk-stage1/rp-pppoe/README
+++ /dev/null
@@ -1,87 +0,0 @@
-pppoe: a PPP-over-Ethernet redirector for pppd
-Copyright (C) 2001 Roaring Penguin Software Inc.
-
-Much inspiration from an earlier client by Luke Stras.
-
-The MSS clamping was inspired by mssclampfw by Marc Boucher <marc@mbsi.ca>
-with acknowledgements to Rebel.com (http://www.rebel.com).  However, the
-actual MSS clamping code is original and is licensed under the GPL, unlike
-the original mssclampfw.
-
-Introduction
-============
-
-pppoe is a user-space redirector which permits the use of PPPoE
-(Point-to-Point Over Ethernet) with Linux.  PPPoE is used by many
-ADSL service providers.
-
-Installation
-============
-
-Requirements
-------------
-
-1) Linux 2.2.9 or later on Intel, Sparc or PowerPC.  It may work on
-   Alpha, too -- anyone care to let me know?
-
-	   OR
-
-   Linux 2.0.36 or later.
-
-	   OR
-
-   FreeBSD, NetBSD or OpenBSD with BPF support.  I have access only
-   to FreeBSD.  In general, I can't answer questions about the *BSD's
-   as well as I can about Linux.
-
-
-2) pppd 2.3.10 or later.  Versions 2.3.7 and later work unless you use
-   demand-dialling.  For demand dialling, you *must* use 2.3.10 or later.
-
-QUICKSTART
-----------
-
-If you're lucky, the "quickstart" method will work.  After unpacking
-the archive, become root and type:
-
-	./go
-
-This should configure, compile and install the software and set up your
-ADSL connection.  You'll have to answer a few questions along the way.
-
-If you want the GUI wrapper, type:
-
-	./go-gui
-
-If ./go and ./go-gui didn't work, read the rest of this README.
-
-Compiling
----------
-
-Compile and install pppd if you don't already have it.  Then:
-
-1) Unpack:
-
-	$ tar xzvf rp-pppoe-xxx.tar.gz
-
-2) Change to source directory:
-
-	$ cd src
-
-3) Configure:
-
-	$ ./configure
-
-4) Compile:
-
-	$ make
-
-4) Install (this step must be done as root)
-
-	# make install
-
-5) Now read doc/HOW-TO-CONNECT
-
---
-David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc.
-http://www.roaringpenguin.com           | Linux and UNIX Specialists
\ No newline at end of file
diff --git a/mdk-stage1/rp-pppoe/configs/firewall-masq b/mdk-stage1/rp-pppoe/configs/firewall-masq
deleted file mode 100644
index cb16fbecf..000000000
--- a/mdk-stage1/rp-pppoe/configs/firewall-masq
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/sh
-#
-# firewall-masq		This script sets up firewall rules for a machine
-#                       acting as a masquerading gateway
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Interface to Internet
-EXTIF=ppp+
-
-ANY=0.0.0.0/0
-
-ipchains -P input ACCEPT
-ipchains -P output ACCEPT
-ipchains -P forward DENY
-
-ipchains -F forward
-ipchains -F input
-ipchains -F output
-
-# Deny TCP and UDP packets to privileged ports
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p udp -j DENY
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p tcp -j DENY
-
-# Deny TCP connection attempts
-ipchains -A input -l -i $EXTIF -p tcp -y -j DENY
-
-# Deny ICMP echo-requests
-ipchains -A input -l -i $EXTIF -s $ANY echo-request -p icmp -j DENY
-
-# Do masquerading
-ipchains -A forward -j MASQ
-echo 1 > /proc/sys/net/ipv4/ip_forward
diff --git a/mdk-stage1/rp-pppoe/configs/firewall-standalone b/mdk-stage1/rp-pppoe/configs/firewall-standalone
deleted file mode 100644
index bcb1e92b1..000000000
--- a/mdk-stage1/rp-pppoe/configs/firewall-standalone
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-#
-# firewall-standalone	This script sets up firewall rules for a standalone
-#                       machine
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Interface to Internet
-EXTIF=ppp+
-
-ANY=0.0.0.0/0
-
-ipchains -P input ACCEPT
-ipchains -P output ACCEPT
-ipchains -P forward DENY
-
-ipchains -F forward
-ipchains -F input
-ipchains -F output
-
-# Deny TCP and UDP packets to privileged ports
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p udp -j DENY
-ipchains -A input -l -i $EXTIF -d $ANY 0:1023 -p tcp -j DENY
-
-# Deny TCP connection attempts
-ipchains -A input -l -i $EXTIF -p tcp -y -j DENY
-
-# Deny ICMP echo-requests
-ipchains -A input -l -i $EXTIF -s $ANY echo-request -p icmp -j DENY
-
diff --git a/mdk-stage1/rp-pppoe/configs/pap-secrets b/mdk-stage1/rp-pppoe/configs/pap-secrets
deleted file mode 100644
index f4483a723..000000000
--- a/mdk-stage1/rp-pppoe/configs/pap-secrets
+++ /dev/null
@@ -1,9 +0,0 @@
-# Edit this file and place it in /etc/ppp/pap-secrets
-
-#User			#Server		#Password	#IP
-bxxxxx@sympatico.ca	*		my_password	*
-
-# Replace bxxxxx@sympatico.ca with your Sympatico user-ID
-# Replace my_password with your Sympatico password
-
-# For Magma, use xxyyzz@magma.ca
diff --git a/mdk-stage1/rp-pppoe/configs/pppoe-server-options b/mdk-stage1/rp-pppoe/configs/pppoe-server-options
deleted file mode 100644
index 8319870ac..000000000
--- a/mdk-stage1/rp-pppoe/configs/pppoe-server-options
+++ /dev/null
@@ -1,5 +0,0 @@
-# PPP options for the PPPoE server
-require-pap
-login
-lcp-echo-interval 10
-lcp-echo-failure 2
diff --git a/mdk-stage1/rp-pppoe/configs/pppoe.conf b/mdk-stage1/rp-pppoe/configs/pppoe.conf
deleted file mode 100644
index 9f77b913c..000000000
--- a/mdk-stage1/rp-pppoe/configs/pppoe.conf
+++ /dev/null
@@ -1,126 +0,0 @@
-#***********************************************************************
-#
-# pppoe.conf
-#
-# Configuration file for rp-pppoe.  Edit as appropriate and install in
-# /etc/ppp/pppoe.conf
-#
-# NOTE: This file is used by the adsl-start, adsl-stop, adsl-connect and
-#       adsl-status shell scripts.  It is *not* used in any way by the
-#       "pppoe" executable.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# $Id$
-#***********************************************************************
-
-# When you configure a variable, DO NOT leave spaces around the "=" sign.
-
-# Ethernet card connected to ADSL modem
-ETH=eth1
-
-# ADSL user name.  You may have to supply "@provider.com"  Sympatico
-# users in Canada do need to include "@sympatico.ca"
-# Sympatico uses PAP authentication.  Make sure /etc/ppp/pap-secrets
-# contains the right username/password combination.
-# For Magma, use xxyyzz@magma.ca
-USER=bxxxnxnx@sympatico.ca
-
-# Bring link up on demand?  Default is to leave link up all the time.
-# If you want the link to come up on demand, set DEMAND to a number indicating
-# the idle time after which the link is brought down.
-DEMAND=no
-#DEMAND=300
-
-# DNS type: SERVER=obtain from server; SPECIFY=use DNS1 and DNS2;
-# NOCHANGE=do not adjust.
-DNSTYPE=SERVER
-
-# Obtain DNS server addresses from the peer (recent versions of pppd only)
-USEPEERDNS=yes
-
-DNS1=
-DNS2=
-
-### ONLY TOUCH THE FOLLOWING SETTINGS IF YOU'RE AN EXPERT
-
-# How long adsl-start waits for a new PPP interface to appear before
-# concluding something went wrong.  If you use 0, then adsl-start
-# exits immediately with a successful status and does not wait for the
-# link to come up.  Time is in seconds.
-#
-# WARNING WARNING WARNING:
-#
-# If you are using rp-pppoe on a physically-inaccessible host, set
-# CONNECT_TIMEOUT to 0.  This makes SURE that the machine keeps trying
-# to connect forever after adsl-start is called.  Otherwise, it will
-# give out after CONNECT_TIMEOUT seconds and will not attempt to
-# connect again, making it impossible to reach.
-CONNECT_TIMEOUT=30
-
-# How often in seconds adsl-start polls to check if link is up
-CONNECT_POLL=2
-
-# Specific desired AC Name
-ACNAME=
-
-# Specific desired service name
-SERVICENAME=
-
-# Character to echo at each poll.  Use PING="" if you don't want
-# anything echoed
-PING="."
-
-# File where the adsl-connect script writes its process-ID.
-# Three files are actually used:
-#   $PIDFILE       contains PID of adsl-connect script
-#   $PIDFILE.pppoe contains PID of pppoe process
-#   $PIDFILE.pppd  contains PID of pppd process
-CF_BASE=`basename $CONFIG`
-PIDFILE="/var/run/$CF_BASE-adsl.pid"
-
-# Do you want to use synchronous PPP?  "yes" or "no".  "yes" is much
-# easier on CPU usage, but may not work for you.  It is safer to use
-# "no", but you may want to experiment with "yes".  "yes" is generally
-# safe on Linux machines with the n_hdlc line discipline; unsafe on others.
-SYNCHRONOUS=no
-
-# Do you want to clamp the MSS?  Here's how to decide:
-# - If you have only a SINGLE computer connected to the ADSL modem, choose
-#   "no".
-# - If you have a computer acting as a gateway for a LAN, choose "1412".
-#   The setting of 1412 is safe for either setup, but uses slightly more
-#   CPU power.
-CLAMPMSS=1412
-#CLAMPMSS=no
-
-# LCP echo interval and failure count.
-LCP_INTERVAL=20
-LCP_FAILURE=3
-
-# PPPOE_TIMEOUT should be about 4*LCP_INTERVAL
-PPPOE_TIMEOUT=80
-
-# Firewalling: One of NONE, STANDALONE or MASQUERADE
-FIREWALL=NONE
-
-# Linux kernel-mode plugin for pppd.  If you want to try the kernel-mode
-# plugin, use LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
-LINUX_PLUGIN=
-
-# Any extra arguments to pass to pppoe.  Normally, use a blank string
-# like this:
-PPPOE_EXTRA=""
-
-# Rumour has it that "Citizen's Communications" with a 3Com
-# HomeConnect ADSL Modem DualLink requires these extra options:
-# PPPOE_EXTRA="-f 3c12:3c13 -S ISP"
-
-# Any extra arguments to pass to pppd.  Normally, use a blank string
-# like this:
-PPPD_EXTRA=""
-
-
diff --git a/mdk-stage1/rp-pppoe/doc/CHANGES b/mdk-stage1/rp-pppoe/doc/CHANGES
deleted file mode 100644
index 9afce027d..000000000
--- a/mdk-stage1/rp-pppoe/doc/CHANGES
+++ /dev/null
@@ -1,177 +0,0 @@
-Changes from Version 2.8 to 3.0:
-
-- Many small improvements to server.  Server now only makes one
-  discovery socket, systemwide, with addition of "-n" option to pppoe.
-
-- Fixes for compilation problems on BSD, Solaris and some Linux platforms.
-
-- Added "-p" option to pppoe-server to allow you to specify a pool of
-  IP addresses to assign to clients.
-
-- Added GUI system (tkpppoe).  This work was funded by Iospan
-  Wireless, Inc.  The GUI includes a Set-UID wrapper (pppoe-wrapper)
-  which allows ordinary users to control a link (if so authorized.)
-  I believe the wrapper script is secure, but please audit the
-  source code (gui/wrapper.c) if you have any concerns.
-
-- Changes to scripts and pppoe.conf.  DNS setup is now dynamic (happens
-  each time adsl-connect runs.)
-
-- Made relay.c check packet lengths rigorously; made it throw out Ethernet
-  frame padding on session packets as well as discovery packets.
-
-Changes from Version 2.7 to 2.8:
-
-- Added init scripts for TurboLinux, courtesy of Yasuhiro Sumi.
-
-- Made relay.c check packet lengths rigorously; made it throw out Ethernet
-  frame padding on discovery packets.
-
-*** NOTE: 2.7 was not released publicly
-
-Changes from Version 2.6 to 2.7:
-
-- Completely restructured source file tree.
-
-- Much internal restructuring to eliminate a bunch of global variables.
-
-- adsl-connect now executes /etc/ppp/adsl-lost whenever connection is dropped
-  or cannot be established.
-
-- Split pppoe.c into pppoe.c and discovery.c.
-
-- Added relay agent (pppoe-relay).
-
-- Made adsl-connect script use the "-U" (host-unique) option to better support
-  multiple PPPoE links.
-
-- Added support for kernel-mode PPPoE (EXPERIMENTAL, UNSUPPORTED!)
-
-- Added "-o" option to PPPoE server; encoded server PID in pppoe-server
-  cookie.
-
-Changes from Version 2.5 to 2.6:
-
-- Code should now compile cleanly on Caldera and Slackware Linux
-
-- Fixed rp-pppoe.spec file to work on Mandrake and Red Hat.
-
-- Deleted some obsolete files
-
-- Fixed bug in Solaris/x86 port (thanks to Philippe Levan)
-
-- Made shell scripts nicer under Solaris (again, Philippe Levan)
-
-- Made adsl-status look under /var/run and /etc/ppp for PID files.  Should
-  fix problems with NetBSD.
-
-- Added PPPD_EXTRA to pppoe.conf; made the PID file depend on the config
-  file name.  This makes it easier to run multiple PPPoE sessions.
-
-Changes from Version 2.4 to 2.5:
-
-- Tested for zero-length TCP option-length field, and for reverse-packing
-  of type/code bitfields.  Thanks to Robert Schlabbach for pointing out
-  these problems.
-
-- Set umask to 077 in adsl-setup.in to protect created files like
-  /etc/ppp/pap-secrets.
-
-Changes from Version 2.3 to 2.4:
-
-- Fixed spec file to automatically add .gz extension to man files as required
-
-- Tightened firewall rules.
-
-- Better check for /var/run in adsl-status; minor shell script fixes and
-  cleanups for NetBSD and Solaris.
-
-- Added FAQ to HOW-TO-CONNECT regarding running a script each time a
-  connection is made.
-
-Changes from Version 2.2 to 2.3:
-
-- Fixed the init script to create/remove /var/lock/subsys/adsl (patch
-  courtesy of Charley Carter.)
-
-- Added support (under Linux) for N_HDLC line discipline which should
-  greatly reduce CPU usage.  My tests show it cuts CPU usage in half.
-  My 486 DX2/66 gets 800 kb/s at 22% CPU usage.
-
-- adsl-connect uses "setsid" (if available) so that adsl-stop doesn't kill
-  its caller.  There is (IMO) a bug in pppd which kills all processes in
-  its process group if the "pty" option is used.  The setsid program gets
-  around this bug, on Linux at least.
-
-- Port to Solaris, courtesy of David Holland.
-
-- Renamed spec file from "spec" to "rp-pppoe.spec" and made some cleanups.
-  NOTE: Red Hat, in their infinite wisdom, decided to make the new RPM
-  compress man pages automatically.  You may have problems building RPM's
-  from source unless you get the latest rpm package and make sure it
-  compresses man pages.
-
-Changes from Version 2.1 to 2.2:
-
-- Added "-f" option to pppoe to allow use of any Ethernet frame type
-  for PPPoE.  USE WITH CAUTION -- this is a workaround for broken DSL
-  providers, not something you should monkey with freely!
-
-- Added pppoe-sniff program to help expose non-standard PPPoE implementations.
-
-Changes from Version 2.0 to 2.1:
-
-- Fixed minor bugs in bounds-checking
-
-- Modified adsl-status to use output of "netstat -r -n" to determine whether
-  or not link is up.  This should make it independent of locale, I hope!
-
-- Added "-k" and "-d" options to pppoe.
-
-Changes from Version 1.9 to 2.0:
-
-- Addition of pppoe-server
-
-- Massive internal code restructuring
-
-- Zealous bounds-checking everywhere.
-
-- adsl-setup now quotes user name and password in /etc/ppp/pap-secrets.
-
-- Ported to OpenBSD, FreeBSD and NetBSD, courtesy of Geoff Mottram
-  and Yannis Sismanis.
-
-- Rearranged adsl-* shell scripts, courtesy of Heiko Schlittermann.
-
-- Fixed bug in which Host-Uniq did not work if access concentrator sent
-  a cookie.
-
-- Addition of SuSE-specific "init" script, courtesy of Gary Cameron.
-
-Changes from Version 1.8 to 1.9:
-
-- Added some more documentation to HOW-TO-CONNECT
-
-- Demand-dialling option now works correctly
-
-- SIGHUP terminates pppoe after sending a PADT to the access concentrator
-
-- Minor cleanups to connection shell scripts
-
-Changes from Version 1.7 to 1.8:
-
-- Added demand-dialling option
-
-- Clarified HOW-TO-CONNECT
-
-- Added adsl-status script
-
-- Added "restart" and "status" options to Red Hat /etc/rc.d/init.d/adsl script
-
-- Made adsl-setup check for existence of pppd
-
-- Wildcarded external interface in firewall rules
-
-- Made pppoe send a PADT frame if connection is terminated
-
-$Id$
diff --git a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT b/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT
deleted file mode 100644
index 3e888af69..000000000
--- a/mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT
+++ /dev/null
@@ -1,295 +0,0 @@
-$Id$
-
-This package lets you connect a Linux machine to Sympatico HSE or Magma's
-high-speed service using a Nortel 1-meg modem.
-
-Follow these steps and you should have your high-speed service up and running.
-
-0. Install the rp-pppoe-software
---------------------------------
-
-You should have already done this by the time you're reading this.  If not,
-go back and read README.
-
-1. Set up your Ethernet hardware
---------------------------------
-
-First, make sure the Ethernet card you intend to use with the modem is
-visible to the Linux kernel.  Just how to do this is beyond the scope
-of this document.  However, if the card is the only Ethernet card in
-the system, executing:
-
-	ifconfig eth0
-
-should display something like this:
-
-	eth0      Link encap:Ethernet  HWaddr 00:60:67:62:31:D4  
-
-plust some more lines.  Your HWaddr will be different.  As long as you see
-the HWaddr line, your card should be working.
-
-DO NOT assign an IP address to the Ethernet card.  DO NOT configure the
-card to come up at boot time.
-
-2. Configure various files
---------------------------
-
-Several files need editing.  The easiest way to do this is to run
-the following command as root:
-
-	adsl-setup
-
-Answer the questions and you should be all set.  If you want to know what
-goes on behind the scenes, continue reading this document.  If you don't
-care and your connection works, stop reading. :-)
-
-3. Edit pap-secrets
--------------------
-
-Edit the "pap-secrets" file, inserting your proper user-ID and password.
-Install the file (or copy the relevant lines) to /etc/ppp/pap-secrets.
-Your ISP may use CHAP authentication.  In this case, add the line to
-/etc/ppp/chap-secrets.
-
-4. Edit /etc/ppp/pppoe.conf
------------------------------
-
-The file /etc/ppp/pppoe.conf contains configuration information for the
-ADSL connection.  You need to edit the following items:
-
-- Change ETH=eth1 to the correct Ethernet device for your modem.
-- Change USER=bxxxnxnx@sympatico.ca to your proper ADSL user-ID.
-
-Don't edit any of the other settings unless you're an expert.
-
-5. Set up DNS
--------------
-
-If you are using DNS servers supplied by your ISP, edit the file
-/etc/resolv.conf to contain these lines:
-
-	nameserver ip_addr_of_first_dns_server
-	nameserver ip_addr_of_second_dns_server
-
-For example:
-
-	nameserver 204.101.251.1
-	nameserver 204.101.251.2
-
-
-6. Firewall your machine
-------------------------
-
-MAKE SURE YOU FIREWALL YOUR MACHINE.  A sample firewall script is given
-in the shell script "firewall"  To install the script:
-
-a) Copy it to /etc/rc.d/init.d/firewall
-b) Type: chkconfig firewall on
-c) Start the firewall: sh /etc/rc.d/init.d/firewall start
-
-(The above procedure works ONLY on Red Hat-like systems.)
-
-You may want to tweak the script somewhat.
-
-7. Bring up the connection at boot time
----------------------------------------
-
-On a Red Hat system, the installation procedure should have installed
-a script called /etc/rc.d/init.d/adsl.  To bring up the connection
-at boot time, just type this command as root:
-
-	chkconfig --add adsl
-
-On non-Red-Hat systems, add this line to the end
-of /etc/rc.d/rc.local:
-
-	/usr/sbin/adsl-start
-
-8. Configure LAN Hosts
-----------------------
-
-If you have a LAN behind the firewall, you have to lower the TCP
-maximum segment size from the normal 1460 to 1452 (or better, 1412.)
-You have two options: Either set the MTU of all the interfaces on
-other hosts on the LAN to 1452, or use the "-m 1412" option to pppoe.
-The "-m" option for pppoe is far simpler and makes it easier to add
-hosts to the LAN, but consumes some extra CPU time.
-
-If you want to manually configure the LAN hosts, here's how:
-
-In Linux, use: "ifconfig eth0 mtu 1452".  For best results, put this
-in an /etc/rc.d/rc.local script.
-
-For Windows, machines, see http://lan.cns.ksu.edu/OS/WIN95/slip95.htm.
-Set the MaxMTU to 1452.
-
-9. Commands to control the ADSL link
-------------------------------------
-
-As root, bring up the link by typing:   adsl-start
-As root, bring down the link by typing: adsl-stop
-
-That's it!
-
---
-David F. Skoll <dfs@roaringpenguin.com> | Roaring Penguin Software Inc.
-http://www.roaringpenguin.com           | Linux and UNIX Specialists
-
-PROBLEMS!  DAVE, IT DOESN'T WORK!
----------------------------------
-
-Here are some problems PPPoE users have encountered.
-
------------------------------------------------------------------------------
-A) Can't see the Ethernet interface
-
-Well, I can't really help you here.  To use these instructions, you must
-have Linux working to the point where it recognizes your Ethernet card.
-If you type "ifconfig ethx" and you get back a HWAddr value, your Ethernet
-card is probably OK.  But I really can't help with hardware configuration
-issues.
-
------------------------------------------------------------------------------
-B) Connection seems to come up, but I can't browse the web or ping anything
-
-You probably don't have DNS set up.  See step 6.
-
------------------------------------------------------------------------------
-C) Can't compile PPPoE
-
-I have only tested compilation on 2.2-kernel machines.  Make sure you have
-"make", the C compiler and all development header files installed.
-
------------------------------------------------------------------------------
-D) pppd complains about (i) "unknown option pty" or (ii) "pty option precludes
-   specifying device name"
-
-(i) Your pppd is too old.  You need at least 2.3.7.
-(ii) Your /etc/ppp/options file is not empty.  Empty it!
-
------------------------------------------------------------------------------
-E) pppoe dies with the log message "Message too long"
-
-You set the MTU of the Ethernet interface connected to the ADSL modem
-to less than 1500.  Don't do that.
-
------------------------------------------------------------------------------
-F) Internal hosts can't see the Internet
-
-Do you have masquerading set up?  I can't help you in great detail, but
-see the IPCHAINS-HOWTO and the IP-Masquerade mini-HOWTO.
-
------------------------------------------------------------------------------
-G) Authentication fails
-
-Make sure you have the right secret in /etc/ppp/pap-secrets.  Your ISP
-may be using CHAP; it won't hurt to copy the line to /etc/ppp/chap-secrets.
-
-Also, MAKE SURE that /etc/ppp/options is EMPTY.  The "adsl-connect" script
-supplies all required options on the command line; additional options
-in /etc/ppp/options may mess things up.
-
------------------------------------------------------------------------------
-H) VPN software does not work
-
-If you are using VPN software on a Windows or Linux machine with another
-Linux machine running PPPoE as the gateway, you MUST NOT use the "-m" option
-to pppoe.  This alters IP packets, which will break any VPN which uses IPSec.
-In /etc/ppp/pppoe.conf, set CLAMPMSS to "no".  You'll also have to reduce
-the MTU on the hosts behind the gateway to 1452.
-
------------------------------------------------------------------------------
-I) I can browse some web sites just fine, but others stall forever.
-
-There is probably a buggy router or firewall between you and the Web server.
-One possible workaround:  In /etc/ppp/pppoe.conf, find the line which reads:
-
-	CLAMPMSS=1412
-
-Try lowering the 1412 until it works (go down in steps of 100 or so.)  Each
-time you lower the value, you have to restart your connection like this:
-
-	adsl-stop; adsl-start
-
-This should work around buggy routers which do not support Path MTU discovery.
-
------------------------------------------------------------------------------
-J) Whenever I connect using ADSL, my internal LAN no longer sees the gateway
-
-You are more than likely running a 2.0.X Linux kernel.  To solve this
-problem, give the Ethernet card connected to the DSL modem a fake IP
-address.  For example, if eth0 is your internal LAN card and eth1 goes to
-the DSL modem, do something like this:
-
-	ifconfig eth1 10.0.0.1 netmask 255.255.255.0
-
-(You may have to choose a different IP address; experiment.)
------------------------------------------------------------------------------
-K) How can I run a script every time I connect and get a new IP address?
-
-Put the script in /etc/ppp/ip-up.  See the pppd(8) man page.
------------------------------------------------------------------------------
-L) Nothing works!
-
-You may need to put your Ethernet card in half-duplex, 10Mb/s mode to
-work with the DSL modem.  You may have to run a DOS program to do this,
-or pass special parameters to the Linux driver.
-
-Some providers object to attempts to set the MRU or MTU.  Try removing
-"mtu 1492 mru 1492" from PPP_STD_OPTIONS in the adsl-connect script.
-This problem has been seen with an ISP in Hong Kong.
-
-Your DSL provider may be using non-standard PPPoE frames or require
-something special in the Service-Name field.  If you have two computers,
-you can try sniffing out these values with the "pppoe-sniff" program.
-Type "man pppoe-sniff" for details.  If you don't have two computers,
-you'll have to ask your DSL provider if it uses non-standard PPPoE frames
-or special Service-Name fields.  Good luck getting an answer...
-
-If pppoe-sniff indicates that nothing is amiss, make sure the Ethernet
-card associated with the ADSL modem does NOT have a valid IP address.
-(NOTE: For 2.0 kernels, you may have to give it a fake IP address
-which is not on your internal subnet.  Something like 192.168.42.42
-might work if you are not using 192.168.42.*)
-
-If you are using synchronous PPP on a slow machine, try switching to
-asynchronous PPP.
-
-Make sure no entries in the routing table go through the Ethernet card
-connected to the ADSL modem.  You might want to add these lines in
-adsl-connect:
-
-	ifconfig ethx down
-	ifconfig ethx up mtu 1500
-
-which should reset things to sane values.
-
-#######################################################################
-#                        WHEN ALL ELSE FAILS:                         #
-#######################################################################
-
-If you are completely unable to connect, run the adsl-start script in
-debugging mode.  If you are using bash as your shell (if you don't
-know what your shell is, it's probably bash), type this:
-
-	DEBUG=1 adsl-start
-
-In tcsh or csh, use:
-
-	setenv DEBUG 1; adsl-start
-
-Then follow the instructions to mail the debugging file to me.  PLEASE
-DON'T DO THIS until you have exhausted all other avenues; rp-pppoe is
-free software and it costs me time and money to help people with
-problems.  While I don't mind doing this, I do mind it if you don't
-make an effort to fix the problem yourself first.
-
-WARNING: If you run adsl-start in debugging mode and you manage to
-connect, your connection will be extremely slow and huge amounts of
-data will quickly fill your /tmp directory.  Do not use debugging mode
-unless you really cannot get your connection to work.
-
-Be aware that debugging mode produces hex dumps which potentially reveal
-your user name and password.  If the debugging output includes packets
-labeled "PPPOE Session", you may wish to remove these packets from the
-dump before mailing it to me.
diff --git a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE b/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE
deleted file mode 100644
index 454c4b870..000000000
--- a/mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE
+++ /dev/null
@@ -1,39 +0,0 @@
-RP-PPPoE now supports kernel-mode PPPoE on Linux kernels 2.4.x.  However,
-the default "./go" build procedure does not make kernel-mode support.
-
-Here's what you need to do:
-
-1) Download Michal Ostrowski's patched version of pppd which supports
-a PPPoE plugin.  The latest version as of this writing is
-at http://www.math.uwaterloo.ca/~mostrows/ in
-http://www.math.uwaterloo.ca/~mostrows/ppp-2.4.0-pppoe4.tgz.  It is
-also mirrored at http://www.roaringpenguin.com/pppoe/
-
-2) Unpack that version of pppd and build and install it.
-
-3) In the rp-pppoe directory, change to src/ and type:
-
-	./configure --enable-plugin=/path/to/ppp-tree
-
-Here, /path/to/ppp-tree is where you unpacked the pppd software.  It
-should be the directory named ppp-2.4.0.pppoe
-
-4) Type make; make install
-
-5) Edit /etc/ppp/pppoe.conf to include this line:
-
-	LINUX_PLUGIN=/etc/ppp/plugins/rp-pppoe.so
-
-6) Make sure your kernel was built with support for PPP, PPPOX and that
-all modules are locatable by modprobe.  Make sure you have a /dev/ppp
-device:
-
-	mknod /dev/ppp c 108 0
-
-After that, adsl-start should use kernel-mode PPPoE.
-
-This code is experimental and unsupported.  Use at your own risk.
-
---
-David F. Skoll <dfs@roaringpenguin.com>
-
diff --git a/mdk-stage1/rp-pppoe/doc/LICENSE b/mdk-stage1/rp-pppoe/doc/LICENSE
deleted file mode 100644
index 9ed341535..000000000
--- a/mdk-stage1/rp-pppoe/doc/LICENSE
+++ /dev/null
@@ -1,339 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                          675 Mass Ave, Cambridge, MA 02139, USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-        Appendix: How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
-    Gnomovision version 69, Copyright (C) 19yy name of author
-    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
-  `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
-  <signature of Ty Coon>, 1 April 1989
-  Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs.  If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library.  If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/mdk-stage1/rp-pppoe/doc/PROBLEMS b/mdk-stage1/rp-pppoe/doc/PROBLEMS
deleted file mode 100644
index f0b7d7d59..000000000
--- a/mdk-stage1/rp-pppoe/doc/PROBLEMS
+++ /dev/null
@@ -1,3 +0,0 @@
-Problems?
-
-See the last section of HOW-TO-CONNECT.
diff --git a/mdk-stage1/rp-pppoe/go b/mdk-stage1/rp-pppoe/go
deleted file mode 100755
index 305ac9ee4..000000000
--- a/mdk-stage1/rp-pppoe/go
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# go
-#
-# Quick-start shell script to set up ADSL
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# Figure out directory of script
-MYDIR=`dirname $0`
-cd $MYDIR/src
-
-echo "Running ./configure..."
-./configure
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like ./configure failed."
-    exit 1
-fi
-
-echo "Running make..."
-make
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make failed."
-    exit 1
-fi
-
-echo "Running make install..."
-make install
-
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make install failed."
-    exit 1
-fi
-
-for i in a a a a a a a a a a a a a a a a a a a a a a a a a a a a ; do
-    echo ""
-done
-
-sh ../scripts/adsl-setup
diff --git a/mdk-stage1/rp-pppoe/go-gui b/mdk-stage1/rp-pppoe/go-gui
deleted file mode 100755
index ddce984fd..000000000
--- a/mdk-stage1/rp-pppoe/go-gui
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# go-gui
-#
-# Quick-start shell script to set up ADSL and GUI wrapper
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# GUI only works on Linux
-if test "`uname`" != "Linux" ; then
-    echo "Sorry, the GUI only works on Linux."
-    exit 1
-fi
-
-# Figure out directory of script
-MYDIR=`dirname $0`
-cd $MYDIR/src
-
-echo "Running ./configure..."
-./configure
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like ./configure failed."
-    exit 1
-fi
-
-echo "Running make..."
-make
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make failed."
-    exit 1
-fi
-
-echo "Running make install..."
-make install
-
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make install failed."
-    exit 1
-fi
-
-echo "Building GUI wrapper..."
-cd ../gui
-make
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make failed."
-    exit 1
-fi
-
-echo "Installing GUI..."
-make install
-
-if [ "$?" != 0 ] ; then
-    echo "Oops!  It looks like make install failed."
-    exit 1
-fi
-
-# Install entry in KDE menu
-if test -n "$KDEDIR" ; then
-    echo "Installing KDE menu entry Internet : TkPPPoE..."
-    mkdir -p "$KDEDIR/share/applnk/Internet"
-    cat <<EOF > "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-# KDE Config File
-[KDE Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-# Install entry in GNOME menus
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
-    echo "Installing GNOME menu entry Internet : TkPPPoE..."
-    mkdir -p "$GNOMEDIR/gnome/apps/Internet"
-cat <<EOF > "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-[Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-echo "Running GUI configuration tool..."
-tkpppoe &
-exit 0
diff --git a/mdk-stage1/rp-pppoe/gui/Makefile.in b/mdk-stage1/rp-pppoe/gui/Makefile.in
deleted file mode 100644
index a9b0844c0..000000000
--- a/mdk-stage1/rp-pppoe/gui/Makefile.in
+++ /dev/null
@@ -1,64 +0,0 @@
-# @configure_input@
-#***********************************************************************
-#
-# Makefile
-#
-# Makefile for GUI for Roaring Penguin's Linux user-space PPPoE client.
-#
-# Copyright (C) 2001 Roaring Penguin Software Inc.
-#
-# This program may be distributed according to the terms of the GNU
-# General Public License, version 2 or (at your option) any later version.
-#
-# $Id$
-#***********************************************************************
-DEFINES=
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-mandir=@mandir@
-install=@INSTALL@
-install_dir=@INSTALL@ -d
-sbindir=@sbindir@
-bindir=@bindir@
-
-ADSL_START_PATH=@sbindir@/adsl-start
-ADSL_STOP_PATH=@sbindir@/adsl-stop
-ADSL_STATUS_PATH=@sbindir@/adsl-status
-
-PATHS='-DADSL_START_PATH="$(ADSL_START_PATH)"' '-DADSL_STOP_PATH="$(ADSL_STOP_PATH)"' '-DADSL_STATUS_PATH="$(ADSL_STATUS_PATH)"'
-
-CFLAGS= @CFLAGS@ $(DEFINES) $(PATHS)
-
-all: pppoe-wrapper
-	@echo ""
-	@echo "Type 'make install' as root to install the software."
-
-pppoe-wrapper: wrapper.o
-	@CC@ -o pppoe-wrapper wrapper.o
-
-wrapper.o: wrapper.c
-	@CC@ $(CFLAGS) -c -o wrapper.o wrapper.c
-
-install: all
-	-mkdir -p $(RPM_INSTALL_ROOT)$(sbindir)
-	-mkdir -p $(RPM_INSTALL_ROOT)$(bindir)
-	-mkdir -p $(RPM_INSTALL_ROOT)/etc/ppp/rp-pppoe-gui
-	$(install) -m 4755 -s pppoe-wrapper $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 tkpppoe $(RPM_INSTALL_ROOT)$(bindir)
-	-mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man1
-	$(install) -m 644 pppoe-wrapper.1 $(RPM_INSTALL_ROOT)$(mandir)/man1
-	$(install) -m 644 tkpppoe.1 $(RPM_INSTALL_ROOT)$(mandir)/man1
-	-mkdir -p $(RPM_INSTALL_ROOT)/usr/share/rp-pppoe-gui
-	for i in tkpppoe.html mainwin-busy.png mainwin-nonroot.png mainwin.png props-advanced.png props-basic.png props-nic.png props-options.png ; do \
-		$(install) -m 644 html/$$i $(RPM_INSTALL_ROOT)/usr/share/rp-pppoe-gui; \
-	done
-
-clean:
-	rm -f *.o *~ pppoe-wrapper
-
-distclean: clean
-	rm -f Makefile tkpppoe
-
-.PHONY: clean
-
-.PHONY: distclean
diff --git a/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html b/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html
deleted file mode 100644
index 51aadb895..000000000
--- a/mdk-stage1/rp-pppoe/gui/html/tkpppoe.html
+++ /dev/null
@@ -1,181 +0,0 @@
-<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
-<html>
-<head>
-   <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
-   <meta name="GENERATOR" content="Mozilla/4.76 [en] (X11; U; Linux 2.2.14-5.0 i686) [Netscape]">
-   <title>TkPPPoE Manual</title>
-</head>
-<body text="#000000" bgcolor="#FFFFFF" link="#0000EF" vlink="#59188E" alink="#FF0000">
-
-<center>
-<h1>tkpppoe - A GUI for managing PPPoE Connections</h1>
-</center>
-
-<h1>Introduction</h1>
-
-TkPPPoE is a graphical user interface for managing PPPoE connections.  It
-performs two different functions:
-<ul>
-<li>TkPPPoE lets you <em>define</em> connection properties.  This step must
-be done as root.
-<li>TkPPPoE lets you <em>start and stop</em> PPPoE connections.  This step
-may be done as a normal user, depending on how you configured the connection.
-</ul>
-
-<h1>Defining Connections</h1>
-
-To define connections, start TkPPPoE as root.  You can do this from
-a terminal by typing <code>tkpppoe</code>, or from the KDE or GNOME menus
-by selecting <b>Internet : TkPPPoE</b>.  The following window pops up:
-
-<p>
-<center><img src="mainwin.png" width="361" height="73" alt="Main Window">
-</center>
-
-<p>
-Because you have not yet defined any connections, the connection property
-window also pops up:
-
-<p>
-<center><img src="props-basic.png" width="440" height="259" alt="Connection Properties - Basic">
-</center>
-
-You can pop up the connection property window at any time by clicking
-<b>New Connection...</b>  You can edit the properties of an existing
-connection by selecting the connection's name and clicking
-<b>Properties...</b>
-<h4>Basic Information</h4>
-
-Let's fill in the basic information:
-<ul>
-<li>For <b>Connection Name</b>, enter a unique name for this connection.  It
-can be anything you like, but must contain only letters, numbers, underscores
-or dashes.  In particular, it can't contain spaces.  If you have only one
-PPPoE connection, a good name is <b>Default</b>.
-<li>For <b>User Name</b>, enter the user name supplied by your ISP.  Enter
-only the user name; do not enter an "@isp.com" part.
-<li>For <b>Network</b>, you may have to enter your ISP's domain name.
-(For example, <b>isp.com</b>.)  Some DSL providers add this to your user
-name; others do not.  You may have to experiment a bit.  The two most likely
-choices are your ISP's domain name, or blank.  Try both.
-<li>For <b>Password</b>, enter the password your ISP provided you with.
-</ul>
-
-<h4>NIC and DNS</h4>
-Click on the <b>NIC and DNS</b> tab:
-
-<p>
-<center><img src="props-nic.png" width="440" height="259" alt="Connection Properties - NIC and DNS"></center>
-<p>
-<ul>
-<li>For <b>Ethernet Interface</b>, enter the Ethernet interface connected
-to the DSL modem.  It is something like <b>eth0</b> or <b>eth1</b>.  Click
-on <b>...</b> to browse a list of detected Ethernet interfaces.
-<li>For <b>DNS Setup</b>, you have three options:
-<ol>
-<li><b>From Server</b> means that the system will obtain DNS information from
-the PPPoE server.  This is the correct choice for most ISPs.
-<li><b>Specify</b> means that you will enter the IP addresses of your DNS
-servers manually.  In this case, enter the addresses in the <b>Primary DNS</b>
-and <b>Secondary DNS</b> entries.
-<li><b>Do not Adjust</b> means that you want RP-PPPoE to leave your
-DNS setup alone.  Use this if you are running your own caching DNS server
-or know that you don't want the DNS setup touched.
-</ol>
-</ul>
-
-<h4>Options</h4>
-Click on the <b>Options</b> tab:
-
-<p>
-<center><img src="props-options.png" width="440" height="259" alt="Connection Properties - Options"></center>
-<p>
-<ul>
-<li>If you want ordinary users to be able to start and stop this connection,
-enable <b>Allow use by non-root users</b>.  If you do not enable this,
-non-root users will be able to monitor the connection, but not control it.
-<li>If you want to use synchronous PPP, enable <b>Use synchronous PPP</b>.
-This is recommended as it conserves CPU usage, but may not work on some
-(misconfigured) Linux kernels.
-<li>For <b>Firewalling</b>, you have three options:
-<ol>
-<li><b>Stand-Alone</b> installs a simple firewall ruleset for stand-alone
-machines.  Use this if you have only a single computer connected to the DSL
-modem.
-<li><b>Masquerading</b> installs a simple firewall ruleset for using
-your Linux computer as an Internet sharing device.  If you have two Ethernet
-cards, you can connect one card to the DSL modem and the other to an
-internal LAN.  The masquerading firewall ruleset lets internal machines
-share the DSL connection.
-<li><b>None</b>.  If you already have your own firewall rules, or you wish
-to run servers on your machine, select None.  This is <em>not recommended</em>
-unless you take steps to secure your machine, and know what you are doing.
-</ol>
-</ul>
-
-<h4>Advanced</h4>
-Click on the <b>Advanced</b> tab:
-
-<p>
-<center><img src="props-advanced.png" width="440" height="259" alt="Connection Properties - Advanced"></center>
-<p>
-
-In most cases, you can leave <b>AC-Name</b> and <b>Service-Name</b> blank.
-In some cases, your ISP may require you to enter information in these fields;
-contact your ISP for more information.
-
-<h1>Controlling Connections</h1>
-For these examples, run <code>tkpppoe</code> as a normal user (not root).
-The main window appears like this:
-
-<p>
-<center><img src="mainwin-nonroot.png" width="206" height="73" alt="Main Window - Non-root">
-</center>
-<p>
-<ul>
-<li>To start a connection, press <b>Start</b>.  The two LEDs flash red
-and grey.  If the connection is established, they turn green.
-<li>To stop a connection, press <b>Stop</b>.
-</ul>
-
-<p>The two rectangles to the right of the connection name are the
-<em>status LEDs</em>.  The top LED corresponds to transmitted data and
-the bottom to received.  The LEDs are colored as follows:
-<ul>
-<li>Grey -- connection is not established.
-<li>Flashing red/grey -- connection is being started.
-<li>Green -- connection is up, but idle.
-<li>Yellow -- connection is up and data is being sent or received.
-<li>Red -- connection has been lost, but the system is trying to reestablish it.
-</ul>
-
-<p>
-When a connection is established, two graphs appear:
-
-<p>
-<center><img src="mainwin-busy.png" width="206" height="73" alt="Main Window - Established Connection">
-</center>
-<p>
-
-The left (red) graph shows transmitted packets and the average
-transmission speed (in bits per second) over the sample time.  The
-right (green) graph shows received packets.
-
-<h1>Miscellaneous Information</h1>
-<ul>
-<li>The connection menu has an entry called <b>User's Manual</b> which
-will pop up this user manual (if you have Netscape installed.)
-<li>You can define multiple PPPoE connections, but you should not use
-more than one simultaneuously unless you feel comfortable editing scripts
-and setting up routing tables.  By default, TkPPPoE tries to add a default
-route for connections.  This does not work well with multiple simultaneous
-connections.
-<li>If you exit from TkPPPoE, connections which are up remain up.  You
-have to explicitly stop connections if you want them terminated.
-</ul>
-<hr>
-<a href="http://www.roaringpenguin.com/pppoe/">TkPPPoE</a> is Copyright 2001 by <a href="http://www.roaringpenguin.com">Roaring Penguin Software Inc</a> and
-is licensed under the GNU General Public License.
-<p>Screenshots show TkPPPoE running under the <a href="http://www.xfce.org">XFCE</a> desktop, a lightweight UNIX and Linux desktop.
-</body>
-</html>
diff --git a/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1 b/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1
deleted file mode 100644
index 4fbf2bce2..000000000
--- a/mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1
+++ /dev/null
@@ -1,45 +0,0 @@
-.\" $Id$ 
-.TH PPPOE-WRAPPER 1 "26 February 2001"
-.UC 4
-.SH NAME
-pppoe-wrapper \- SUID wrapper for starting and stopping PPPoE connections.
-.SH SYNOPSIS
-.B pppoe-wrapper start linkname
-.P
-.B pppoe-wrapper stop linkname
-.P
-.B pppoe-wrapper status linkname
-
-.SH DESCRIPTION
-\fBpppoe-wrapper\fR is a small SUID program which allows non-root users
-to start and stop PPPoE links.  It operates as follows:
-
-.TP
-.B o
-First, \fIlinkname\fR is sanity-checked.  Too-long names and names containing
-illegal characters are rejected.
-
-.TP
-.B o
-Second, \fBpppoe-wrapper\fR opens the file \fB/etc/ppp/rp-pppoe-gui/\fR\fIlinkname\fR for reading.  If that file does not contain the line:
-.nf
-
-		NONROOT=OK
-
-.fi
-then \fBpppoe-wrapper\fR fails.
-
-.TP
-.B o
-Otherwise, \fBpppoe-wrapper\fR runs \fBadsl-start\fR, \fBadsl-stop\fR or
-\fBadsl-status\fR with the above filename as its single argument.
-
-.SH AUTHOR
-\fBpppoe-wrapper\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-status(8), tkpppoe(1)
-
-
diff --git a/mdk-stage1/rp-pppoe/gui/tkpppoe.1 b/mdk-stage1/rp-pppoe/gui/tkpppoe.1
deleted file mode 100644
index 183476568..000000000
--- a/mdk-stage1/rp-pppoe/gui/tkpppoe.1
+++ /dev/null
@@ -1,36 +0,0 @@
-.\" $Id$ 
-.TH TKPPPOE 1 "26 February 2001"
-.UC 4
-.SH NAME
-tkpppoe \- Graphical interface for controlling rp-pppoe
-.SH SYNOPSIS
-.B tkpppoe
-
-.SH DESCRIPTION
-\fBtkpppoe\fR is a graphical program for controlling PPPoE links.
-It works with the RP-PPPoE package and has its own HTML manual.
-
-.SH FILES
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/connection-info
-Contains connection information.  This file is not human-editable.
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/passwd
-Contains passwords for each connection.  This file is not human-editable.
-
-.TP
-.B /etc/ppp/rp-pppoe-gui/conf.*
-These configuration files are used by \fBadsl-start\fR.  They are
-generated anew by \fBtkpppoe\fR each time a change is made to a
-connection's properties.
-
-.SH AUTHOR
-\fBtkpppoe\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), pppoe-wrapper(8).
-
diff --git a/mdk-stage1/rp-pppoe/gui/tkpppoe.in b/mdk-stage1/rp-pppoe/gui/tkpppoe.in
deleted file mode 100755
index 37dbf8cc1..000000000
--- a/mdk-stage1/rp-pppoe/gui/tkpppoe.in
+++ /dev/null
@@ -1,2891 +0,0 @@
-#!/bin/sh
-# -*-Mode: TCL;-*-
-
-#--------------------------------------------------------------
-#   tkpppoe
-#
-#   A graphical front-end for configuring and using rp-pppoe.
-#
-#   Copyright (C) 2001 by Roaring Penguin Software Inc.
-#   This file may be distributed under the terms of the GNU General Public
-#   License, Version 2, or (at your option) any later version.
-#
-#   The "Roaring Penguin" logo is a trademark of Roaring Penguin Software Inc.
-#
-#   http://www.roaringpenguin.com
-#
-#--------------------------------------------------------------
-
-# $Id$
-
-# the next line restarts using wish \
-umask 022; \
-exec wish "$0" "$@" || clear; echo "*****"; echo "Cannot find 'wish' -- you need Tcl/Tk installed to run this program"; exit 1
-
-# Set app name
-tk appname TkPPPoE
-
-# Set this to one if you want to allow multiple instances of TkPPPoE
-set AllowMultipleInstances 0
-
-# Check for other instances
-if {"[tk appname]" != "TkPPPoE"} {
-    # Must be another instance running...
-    if {!$AllowMultipleInstances} {
-	send TkPPPoE AnotherInstance
-	exit 0
-    }
-}
-
-# Location of config directory
-set ConfigDir /etc/ppp/rp-pppoe-gui
-
-# Are we running as root?
-set Admin 0
-
-# Location of connection info file
-set ConnectionInfoFile [file join $ConfigDir connection-info]
-
-# Location of password file
-set PasswordFile [file join $ConfigDir passwd]
-
-# Location of "already run" file
-set AlreadyRunFile [file join $ConfigDir gui-already-run]
-
-# Connection information
-set ConnectionInfo {}
-
-# Connection options
-set OPTS(nonroot) 0
-set OPTS(sync) 1
-
-# Location of wrapper
-set Wrapper "@WRAPPER@"
-
-# Timer token for UpdateConnectionState
-set UpdateToken {}
-
-# Update interval in milliseconds
-set UpdateInterval 500
-
-# Packet counters for signalling activity
-set Packets(in) 0
-set Packets(out) 0
-set Bytes(in) 0
-set Bytes(out) 0
-set MeasureTime 0
-
-# Set up some options to make it look better
-option add *Button.borderWidth 1
-option add *Button.Pad 1
-option add *Menubutton.borderWidth 1
-option add *Menubutton.Pad 1
-option add *Entry.Background white
-
-# Array holding help strings for windows
-array set HelpData {}
-
-bind HelpWin <Enter> "HelpWindowEntered %W"
-bind HelpWin <Leave> "HelpWindowLeft %W"
-
-proc AnotherInstance {} {
-    wm deiconify .
-    raise .
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpWindowEntered
-# %ARGUMENTS:
-#  w -- window
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Looks for procedure in HelpData; evals it if found.
-#***********************************************************************
-proc HelpWindowEntered { w } {
-    global HelpData
-    if {[info exists HelpData($w)]} {
-	set cmd "$HelpData($w) Enter"
-	uplevel #0 $cmd
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpWindowLeft
-# %ARGUMENTS:
-#  w -- window
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Looks for procedure in HelpData; evals it if found.
-#***********************************************************************
-proc HelpWindowLeft { w } {
-    global HelpData
-    if {[info exists HelpData($w)]} {
-	set cmd "$HelpData($w) Leave"
-	uplevel #0 $cmd
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: RegisterHelpWindow
-# %ARGUMENTS:
-#  w -- window we need help about
-#  helptext -- the help text
-#  win -- window in which to put help messages
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Sets things up so help text appears in "$win" when mouse enters "$w"
-#***********************************************************************
-proc RegisterHelpWindow {w helptext win} {
-    global HelpData
-    set tags [bindtags $w]
-    if {[lsearch -exact $tags HelpWin] < 0} {
-	lappend tags HelpWin
-	bindtags $w $tags
-    }
-    set HelpData($w) [list HelpInTextWin $helptext $win]
-}
-
-#***********************************************************************
-# %PROCEDURE: HelpInTextWin
-# %ARGUMENTS:
-#  text -- help text
-#  tw -- window in which to write text
-#  what -- one of "Enter" or "Leave"
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Clears out $tw; if $what is "Enter", puts $text in $tw.
-#***********************************************************************
-proc HelpInTextWin {text tw what} {
-    $tw configure -state normal
-    $tw delete 1.0 end
-    if {"$what" == "Enter"} {
-	$tw insert end $text
-    }
-    $tw configure -state disabled
-}
-
-
-#***********************************************************************
-# %PROCEDURE: drawLogo
-# %ARGUMENTS:
-#  c -- canvas to draw logo in
-#  bg -- background color of canvas
-#  pencolor -- color of the word "Penguin"
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Draws Roaring Penguin logo in a Tcl canvas
-#***********************************************************************
-proc drawLogo { c bg {pengcolor #6699cc} } {
-    $c create polygon 372.249 5.182 361.23 5.519 \
-	    346.164 8.892 316.482 20.023 305.463 17.774 296.468 \
-	    19.573 288.935 24.97 282.864 33.177 267.348 55.102 \
-	    254.531 77.814 236.204 125.26 225.635 174.844 \
-	    221.026 226.113 213.605 228.025 208.658 232.634 \
-	    225.523 240.28 250.708 243.316 282.752 242.416 \
-	    320.079 238.818 330.985 193.17 338.181 146.735 \
-	    338.743 99.963 335.483 76.577 329.524 53.191 345.602 \
-	    48.131 353.135 45.995 359.768 41.048 342.679 43.184 \
-	    324.689 40.036 334.583 28.905 348.3 18.674 372.249 \
-	    5.182 -fill #000000 -outline {} -width 1 -tags logo
-
-    $c create line 372.249 5.182 361.23 5.519 \
-	    346.164 8.892 316.482 20.023 305.463 17.774 296.468 \
-	    19.573 288.935 24.97 282.864 33.177 267.348 55.102 \
-	    254.531 77.814 236.204 125.26 225.635 174.844 \
-	    221.026 226.113 213.605 228.025 208.658 232.634 \
-	    225.523 240.28 250.708 243.316 282.752 242.416 \
-	    320.079 238.818 330.985 193.17 338.181 146.735 \
-	    338.743 99.963 335.483 76.577 329.524 53.191 345.602 \
-	    48.131 353.135 45.995 359.768 41.048 342.679 43.184 \
-	    324.689 40.036 334.583 28.905 348.3 18.674 372.249 \
-	    5.182  -tags logo
-
-    $c create polygon 298.605 109.632 290.734 \
-	    159.328 282.752 182.939 271.958 205.65 262.851 \
-	    171.133 263.75 138.752 264.537 164.5 271.958 192.833 \
-	    286.687 157.192 298.605 109.632 -fill #ffffff \
-	    -outline {} -width 1  -tags logo
-
-    $c create line 298.605 109.632 290.734 159.328 \
-	    282.752 182.939 271.958 205.65 262.851 171.133 \
-	    263.75 138.752 264.537 164.5 271.958 192.833 286.687 \
-	    157.192 298.605 109.632  -tags logo
-
-    $c create polygon 312.546 30.592 315.132 35.876 \
-	    310.747 39.586 308.161 34.414 312.546 30.592 -fill \
-	    #ffffff -outline {} -width 1  -tags logo
-
-    $c create line 312.546 30.592 315.132 35.876 \
-	    310.747 39.586 308.161 34.414 312.546 30.592  -tags logo
-
-    $c create polygon 328.624 54.427 322.665 58.7 \
-	    314.458 61.286 289.16 59.15 284.55 74.665 285.338 \
-	    90.181 303.214 98.951 308.499 106.259 310.523 \
-	    116.378 305.913 130.208 312.771 141.563 308.049 \
-	    167.76 299.729 192.158 279.041 238.593 313.558 \
-	    233.871 327.388 185.75 335.033 139.989 335.82 96.253 \
-	    328.624 54.427 -fill #ffffff -outline {} -width 1  -tags logo
-
-    $c create line 328.624 54.427 322.665 58.7 \
-	    314.458 61.286 289.16 59.15 284.55 74.665 285.338 \
-	    90.181 303.214 98.951 308.499 106.259 310.523 \
-	    116.378 305.913 130.208 312.771 141.563 308.049 \
-	    167.76 299.729 192.158 279.041 238.593 313.558 \
-	    233.871 327.388 185.75 335.033 139.989 335.82 96.253 \
-	    328.624 54.427  -tags logo
-
-    $c create polygon 53.837 185.412 54.399 185.862 \
-	    53.837 188.223 54.399 188.673 53.837 188.673 53.837 \
-	    189.572 53.837 190.472 53.387 191.034 52.938 192.833 \
-	    50.577 195.644 49.677 196.656 49.677 197.105 48.215 \
-	    198.455 47.316 198.904 46.866 198.904 44.505 200.816 \
-	    43.606 200.366 42.594 201.265 42.144 201.715 41.245 \
-	    202.277 40.795 202.727 40.345 202.277 39.783 202.277 \
-	    36.972 203.177 36.522 203.177 36.073 203.177 35.623 \
-	    203.627 34.723 203.627 34.161 203.627 34.161 204.076 \
-	    30.901 204.526 28.54 205.538 26.291 205.088 25.729 \
-	    205.088 24.829 205.088 24.38 204.526 23.93 204.526 \
-	    23.48 204.526 22.918 205.088 22.918 206.437 22.918 \
-	    206.887 22.918 207.337 22.468 207.337 22.468 208.798 \
-	    22.018 209.248 22.018 211.16 22.018 211.609 21.569 \
-	    213.521 21.119 215.769 21.569 216.781 20.669 218.13 \
-	    20.669 219.592 20.669 220.042 20.107 220.941 20.107 \
-	    221.953 20.107 223.752 19.657 225.664 19.208 226.113 \
-	    19.657 227.013 18.308 230.835 17.858 240.167 17.296 \
-	    248.15 17.296 249.05 16.846 250.062 15.947 250.062 \
-	    15.048 250.062 15.048 250.511 12.686 251.86 12.237 \
-	    251.86 11.675 251.411 11.675 250.511 11.675 246.689 \
-	    11.225 245.339 11.225 243.878 10.775 240.617 11.225 \
-	    239.268 11.225 238.818 10.775 238.256 10.325 237.357 \
-	    10.325 236.007 9.876 232.634 9.876 231.735 9.876 \
-	    231.285 9.876 230.835 9.876 230.386 9.876 229.824 \
-	    9.426 229.374 9.426 226.113 9.876 226.113 9.876 \
-	    225.664 9.426 224.202 9.426 223.752 9.426 223.302 \
-	    10.325 221.953 9.426 220.941 9.426 219.592 9.426 \
-	    219.142 9.426 218.58 9.426 217.681 9.426 217.231 \
-	    9.426 216.781 8.864 216.332 8.864 214.42 8.864 \
-	    213.97 8.414 213.521 8.414 210.148 8.414 209.248 \
-	    7.964 207.899 8.414 205.988 8.414 204.526 7.065 \
-	    201.265 7.515 200.816 9.426 201.715 10.325 201.265 \
-	    10.775 200.816 10.775 198.904 11.225 198.005 11.225 \
-	    197.555 10.775 197.555 9.876 196.094 9.426 194.744 \
-	    7.515 194.295 6.615 193.845 6.053 193.845 5.153 \
-	    193.283 3.804 191.484 3.804 190.022 3.804 189.572 \
-	    3.804 189.123 3.242 188.673 3.242 186.762 3.804 \
-	    185.412 4.254 184.85 4.704 184.4 7.964 180.24 10.325 \
-	    178.779 11.225 178.779 12.237 177.879 14.036 176.98 \
-	    15.497 175.968 21.569 173.607 22.918 173.157 23.48 \
-	    173.157 24.38 172.707 24.829 172.707 29.102 171.808 \
-	    29.551 171.808 30.001 171.358 31.35 170.796 31.913 \
-	    171.358 32.362 170.796 39.783 171.358 40.345 170.796 \
-	    42.144 171.358 47.766 174.619 48.778 176.418 49.227 \
-	    176.418 49.677 176.98 50.127 176.98 51.588 178.329 \
-	    52.038 179.228 52.488 180.69 52.038 181.14 52.038 \
-	    181.59 52.488 182.039 52.938 182.039 53.387 182.601 \
-	    53.837 183.051 53.837 183.501 53.837 185.412 -fill \
-	    $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 42.594 222.853 43.156 221.953 \
-	    41.694 222.403 39.783 224.202 39.783 224.764 39.783 \
-	    225.214 40.345 225.214 41.245 224.202 41.694 223.752 \
-	    42.594 222.853 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 58.559 234.096 59.009 234.096 \
-	    59.009 234.546 58.559 234.995 58.559 235.445 57.21 \
-	    236.907 56.648 237.806 52.938 241.067 52.038 241.629 \
-	    52.038 242.079 51.026 242.529 50.577 242.978 50.127 \
-	    242.978 49.227 244.44 45.405 246.239 44.055 246.689 \
-	    43.606 246.689 43.606 247.251 42.144 247.251 41.694 \
-	    247.7 40.795 247.7 38.434 248.15 36.522 248.15 \
-	    35.173 247.7 34.161 246.689 33.711 246.239 32.812 \
-	    244.44 32.362 241.629 32.812 239.718 32.812 239.268 \
-	    33.711 234.995 36.522 229.824 35.623 228.474 35.623 \
-	    227.013 36.522 225.664 37.534 224.202 38.883 222.853 \
-	    41.694 220.492 42.594 219.592 43.156 219.592 43.606 \
-	    219.142 45.405 217.681 45.967 217.681 46.416 217.231 \
-	    48.778 215.769 52.038 214.87 53.387 214.42 54.849 \
-	    214.87 55.299 214.87 56.198 215.769 56.198 217.681 \
-	    56.198 218.58 54.399 221.953 53.837 222.853 53.837 \
-	    223.302 53.387 223.752 50.577 226.113 49.677 226.563 \
-	    47.316 228.474 43.156 230.386 41.245 230.835 40.795 \
-	    230.835 40.345 230.835 39.333 230.835 38.883 230.835 \
-	    38.883 229.824 39.783 229.374 40.795 228.474 41.694 \
-	    228.025 42.594 227.575 45.967 227.013 46.866 226.563 \
-	    50.127 224.764 51.588 223.302 52.488 221.953 52.488 \
-	    220.492 52.488 219.142 51.026 218.13 49.677 218.13 \
-	    48.778 218.13 47.766 219.142 47.316 219.142 47.316 \
-	    219.592 46.866 219.592 45.967 220.941 44.505 221.953 \
-	    44.055 222.403 43.606 222.853 42.594 223.752 41.694 \
-	    225.664 41.245 225.664 41.245 226.113 40.345 226.563 \
-	    39.333 227.575 39.333 228.474 38.434 229.374 36.522 \
-	    233.197 35.623 236.457 35.623 237.357 35.623 238.256 \
-	    35.173 241.067 35.623 242.079 36.522 243.428 37.534 \
-	    243.878 37.984 244.44 38.434 244.89 38.883 244.89 \
-	    39.783 245.339 43.156 245.339 45.967 244.44 49.227 \
-	    242.529 50.127 241.629 50.577 241.067 54.399 238.818 \
-	    54.399 238.256 54.399 237.806 56.198 236.907 58.559 \
-	    234.096 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 92.289 248.6 92.739 249.05 \
-	    92.289 249.05 91.84 249.05 90.94 248.6 90.378 248.6 \
-	    89.478 247.7 89.029 247.251 88.129 246.689 87.117 \
-	    245.789 85.768 244.89 85.318 244.44 85.768 244.44 \
-	    85.318 242.529 84.756 242.079 84.756 240.617 84.756 \
-	    240.167 84.756 239.718 84.756 239.268 83.857 236.457 \
-	    83.407 234.096 83.407 233.197 83.407 231.735 83.407 \
-	    223.302 83.407 221.391 82.957 220.941 82.508 221.953 \
-	    80.596 226.113 80.146 226.563 80.146 227.013 79.697 \
-	    228.025 79.135 228.474 79.697 228.474 76.324 234.096 \
-	    75.874 234.995 75.424 236.457 74.975 236.457 74.975 \
-	    236.907 74.975 237.357 74.075 239.268 73.513 239.718 \
-	    73.063 240.167 72.613 241.067 72.164 242.529 71.714 \
-	    242.529 71.714 243.878 70.252 245.789 69.803 246.689 \
-	    68.903 246.689 68.903 247.251 67.891 247.7 66.542 \
-	    247.7 66.092 247.7 65.643 247.7 65.08 247.251 65.08 \
-	    246.689 65.08 245.789 64.631 242.079 65.08 242.079 \
-	    64.631 241.629 65.08 241.067 65.08 238.818 64.631 \
-	    237.806 64.631 236.457 64.631 234.546 64.631 233.197 \
-	    64.631 232.634 64.631 232.185 64.631 231.735 64.631 \
-	    228.924 64.631 227.575 64.631 225.664 64.631 225.214 \
-	    64.631 224.764 64.631 223.302 64.631 217.231 65.08 \
-	    216.332 65.643 215.769 69.803 214.87 70.252 215.32 \
-	    70.252 216.332 70.252 217.681 70.252 218.58 69.803 \
-	    219.142 69.803 220.492 69.353 220.941 69.353 221.391 \
-	    68.903 221.953 68.903 225.664 68.453 226.563 68.453 \
-	    228.025 68.453 228.474 67.891 228.924 67.891 230.835 \
-	    68.453 236.457 68.453 237.806 68.453 238.818 68.453 \
-	    240.617 68.453 241.067 68.903 241.067 68.903 241.629 \
-	    69.353 241.629 70.702 241.067 70.702 240.617 71.264 \
-	    240.167 71.264 239.268 72.164 238.256 73.063 236.457 \
-	    74.525 234.546 74.975 233.197 76.324 230.835 77.336 \
-	    229.824 78.235 227.575 78.235 227.013 78.685 226.563 \
-	    78.685 225.664 79.135 225.214 79.697 224.764 79.697 \
-	    224.202 80.146 222.403 81.046 220.941 81.945 217.681 \
-	    82.957 215.769 85.318 214.87 85.768 214.87 87.567 \
-	    214.42 87.567 215.769 87.117 216.332 87.567 216.781 \
-	    88.129 219.592 87.567 219.592 87.567 220.492 87.567 \
-	    221.391 87.567 224.764 87.567 225.664 87.567 226.113 \
-	    87.117 226.113 87.117 227.575 87.567 229.374 88.579 \
-	    235.445 89.029 239.268 89.029 239.718 89.029 241.067 \
-	    89.478 242.529 89.478 242.978 89.928 243.878 89.928 \
-	    244.44 90.378 244.89 90.94 246.239 92.289 248.6 \
-	    -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 117.587 220.492 118.037 \
-	    222.403 117.587 222.853 117.587 224.764 116.687 \
-	    226.113 116.687 227.013 116.238 228.025 114.776 \
-	    229.374 113.877 231.285 112.865 231.735 109.154 \
-	    234.995 106.343 236.457 105.444 237.357 103.982 \
-	    237.806 103.083 238.256 102.633 238.818 102.183 \
-	    238.818 101.172 239.268 99.822 239.718 98.361 \
-	    239.268 97.461 239.718 96.562 239.268 96.0 238.818 \
-	    95.55 238.818 94.201 236.907 94.201 235.445 94.201 \
-	    233.646 94.65 233.197 94.65 232.634 95.1 232.185 \
-	    95.1 231.735 95.55 231.735 96.0 230.386 97.461 \
-	    228.025 97.461 227.575 98.361 226.563 99.822 224.764 \
-	    101.172 223.302 101.172 222.853 102.633 221.391 \
-	    103.083 220.941 104.432 219.592 103.982 218.58 \
-	    103.982 217.231 103.982 216.781 103.982 215.32 \
-	    104.432 214.42 103.982 210.148 103.982 209.698 \
-	    103.982 209.248 104.432 208.798 104.432 207.899 \
-	    104.432 205.988 104.432 205.538 104.994 203.177 \
-	    104.994 202.277 104.994 201.265 104.994 200.816 \
-	    104.994 200.366 104.994 199.916 105.894 199.467 \
-	    106.343 198.904 106.793 198.455 107.243 198.904 \
-	    108.255 198.904 108.255 199.467 108.705 199.467 \
-	    108.705 202.727 108.255 204.076 108.255 205.538 \
-	    108.255 205.988 107.805 205.988 107.805 206.887 \
-	    107.805 209.698 107.243 210.71 106.793 212.059 \
-	    106.343 214.87 106.343 215.32 106.343 215.769 \
-	    105.894 217.681 106.343 217.681 106.793 217.681 \
-	    107.243 217.231 108.705 215.32 109.604 215.32 \
-	    110.054 214.42 110.054 213.97 110.616 213.97 110.616 \
-	    214.42 111.965 214.87 112.415 214.87 112.865 215.32 \
-	    114.326 216.332 116.238 217.681 116.687 218.58 \
-	    117.137 219.592 117.587 220.042 117.587 220.492 \
-	    -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 123.658 258.944 123.658 \
-	    259.394 123.658 260.293 123.658 261.755 123.658 \
-	    262.654 123.658 263.104 123.209 266.364 123.209 \
-	    267.376 122.759 269.175 122.309 269.737 121.859 \
-	    271.087 121.859 271.536 121.859 271.986 121.297 \
-	    271.986 121.297 272.548 120.847 273.448 120.398 \
-	    273.448 120.398 273.897 118.486 276.259 118.037 \
-	    276.708 117.587 277.608 117.137 278.17 116.687 \
-	    278.17 115.675 278.62 115.675 279.069 113.427 \
-	    280.419 112.865 280.981 112.415 280.981 111.965 \
-	    281.43 110.054 282.33 109.154 282.33 108.705 282.78 \
-	    108.255 282.78 107.805 283.229 104.994 283.792 \
-	    104.432 283.792 103.982 283.792 103.533 283.792 \
-	    103.083 283.792 102.633 283.792 102.183 283.792 \
-	    101.172 283.792 100.722 283.792 99.822 283.792 98.81 \
-	    283.792 96.562 282.33 96.0 282.78 95.1 281.88 94.201 \
-	    281.43 91.84 279.969 92.289 279.519 92.289 278.62 \
-	    93.751 279.069 93.751 279.519 94.201 279.519 94.65 \
-	    279.969 95.1 279.969 96.0 280.981 98.81 281.88 \
-	    101.172 281.88 101.621 281.88 102.633 281.88 103.083 \
-	    281.88 103.533 281.88 104.432 281.43 104.994 281.88 \
-	    105.444 281.43 106.793 281.43 107.805 280.981 \
-	    108.705 280.419 109.154 280.419 109.604 279.969 \
-	    110.054 279.969 110.616 279.969 111.066 279.519 \
-	    112.865 278.17 113.427 277.608 113.877 277.608 \
-	    113.877 277.158 114.326 277.158 114.326 276.708 \
-	    114.776 276.259 115.226 276.259 116.238 274.347 \
-	    116.687 274.347 116.687 273.897 117.587 272.998 \
-	    117.587 272.548 118.037 271.986 119.498 267.826 \
-	    120.398 265.015 120.398 262.204 119.948 259.843 \
-	    119.948 259.394 119.948 258.944 119.498 257.482 \
-	    118.486 254.222 118.037 253.772 117.587 251.86 \
-	    115.675 249.05 115.226 248.6 114.776 248.15 113.877 \
-	    247.251 111.965 246.239 111.515 246.239 110.616 \
-	    246.239 110.054 246.239 109.154 246.239 107.243 \
-	    247.251 106.343 247.251 105.444 247.7 104.994 247.7 \
-	    103.083 248.15 102.183 248.6 101.621 248.6 101.172 \
-	    249.05 100.722 249.499 99.822 250.062 98.361 250.062 \
-	    97.461 249.499 97.012 249.499 96.562 249.05 96.562 \
-	    248.6 97.012 248.15 99.822 245.789 100.272 245.339 \
-	    101.621 244.44 101.621 243.878 102.183 243.428 \
-	    102.633 243.428 102.633 242.978 103.982 241.629 \
-	    103.982 241.067 103.982 240.617 103.982 240.167 \
-	    105.444 239.268 108.705 236.907 108.705 236.457 \
-	    109.154 236.457 110.054 235.445 111.066 234.546 \
-	    112.415 234.096 112.865 233.646 113.427 233.646 \
-	    113.877 233.646 113.877 234.096 114.326 234.995 \
-	    114.776 235.445 114.776 236.457 114.326 237.357 \
-	    113.427 238.818 112.415 239.268 112.415 240.167 \
-	    111.965 240.167 111.515 240.617 110.054 241.629 \
-	    110.054 242.079 109.604 242.529 108.705 242.978 \
-	    110.054 242.978 113.427 242.079 114.326 242.529 \
-	    115.226 242.978 116.687 244.44 119.048 246.689 \
-	    119.498 247.7 119.498 248.15 119.948 248.6 119.948 \
-	    249.05 120.398 249.05 120.398 249.499 120.847 \
-	    249.499 120.847 250.062 121.297 250.511 121.297 \
-	    251.411 121.859 252.31 122.759 252.872 122.759 \
-	    254.222 122.759 254.671 123.658 258.494 123.658 \
-	    258.944 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 147.607 215.769 148.506 215.32 \
-	    148.506 217.231 148.506 217.681 148.506 218.13 \
-	    148.956 218.58 148.506 220.492 148.506 220.941 \
-	    148.506 222.853 148.956 224.764 148.956 226.113 \
-	    148.506 226.563 148.956 226.563 148.506 228.924 \
-	    148.956 229.824 148.956 231.285 148.506 232.185 \
-	    148.956 232.634 148.956 233.646 149.405 234.995 \
-	    148.956 234.995 149.405 235.445 149.405 236.907 \
-	    149.405 237.357 149.968 238.818 150.867 240.167 \
-	    150.867 240.617 151.317 242.079 152.216 243.428 \
-	    153.228 245.339 154.128 245.789 155.027 246.239 \
-	    156.939 245.789 157.388 246.239 156.489 246.689 \
-	    155.027 247.7 154.128 247.7 153.228 247.7 152.216 \
-	    247.7 151.767 247.7 150.867 247.251 150.417 246.239 \
-	    149.405 246.239 148.056 245.339 147.607 244.44 \
-	    147.157 243.428 145.695 241.629 145.695 240.617 \
-	    145.245 240.167 145.245 239.718 144.796 238.256 \
-	    144.346 236.907 144.346 235.445 143.784 234.546 \
-	    143.784 233.197 143.784 232.185 143.784 230.835 \
-	    143.334 229.824 143.784 229.374 143.334 229.374 \
-	    143.334 228.474 142.884 230.386 141.985 231.735 \
-	    140.973 233.197 140.523 234.096 140.523 234.546 \
-	    140.523 234.995 139.624 236.457 139.174 237.806 \
-	    138.162 239.718 137.263 241.067 136.813 242.079 \
-	    135.913 242.978 134.452 244.89 134.002 245.789 \
-	    133.552 245.789 132.091 246.689 131.191 247.251 \
-	    129.73 248.15 129.28 248.15 128.38 247.7 128.38 \
-	    248.15 126.919 247.7 126.019 247.251 125.12 246.239 \
-	    125.12 245.339 124.67 244.89 124.67 244.44 124.67 \
-	    243.428 124.67 242.529 124.67 241.067 124.67 239.718 \
-	    125.12 239.268 124.67 239.268 124.67 238.256 125.12 \
-	    237.806 125.12 237.357 125.12 236.907 125.12 236.007 \
-	    125.12 234.096 125.57 233.197 125.57 232.185 126.019 \
-	    232.185 126.019 231.285 126.019 230.386 126.019 \
-	    229.374 126.469 228.474 126.469 227.013 126.469 \
-	    225.214 126.019 225.214 126.469 225.214 126.019 \
-	    223.302 126.019 221.953 126.019 220.492 125.57 \
-	    220.042 125.12 219.592 124.108 219.142 123.209 \
-	    219.142 121.859 220.042 121.297 220.042 120.398 \
-	    220.941 119.498 221.391 119.048 221.391 118.486 \
-	    221.953 118.037 221.953 118.037 221.391 118.486 \
-	    220.941 119.498 220.042 120.847 219.142 122.759 \
-	    217.681 124.108 216.781 125.12 215.769 126.469 \
-	    214.87 126.919 214.87 127.481 214.87 128.38 214.87 \
-	    128.83 214.87 129.73 214.87 129.73 215.769 130.292 \
-	    215.769 130.742 216.781 130.742 217.681 130.292 \
-	    219.142 130.292 221.953 130.292 223.302 130.292 \
-	    224.202 129.73 225.214 129.28 227.013 128.83 227.575 \
-	    129.28 227.575 129.28 228.474 128.83 229.374 129.28 \
-	    229.824 129.28 230.386 128.83 231.735 128.38 234.096 \
-	    128.38 234.995 127.931 236.457 127.931 239.268 \
-	    127.931 240.167 127.931 241.629 128.83 242.978 \
-	    129.28 243.878 129.73 244.44 130.742 244.44 131.191 \
-	    244.44 132.091 244.44 133.103 243.878 134.002 \
-	    242.978 134.902 242.079 135.351 241.067 135.913 \
-	    240.167 136.363 239.268 136.813 238.818 137.263 \
-	    237.806 137.712 236.907 138.162 235.445 138.724 \
-	    234.546 139.174 233.646 139.624 232.634 140.523 \
-	    230.835 140.973 228.924 141.535 227.013 142.435 \
-	    225.664 142.884 223.302 143.334 221.391 143.334 \
-	    220.941 143.334 219.142 144.346 217.681 144.796 \
-	    216.781 145.695 216.332 146.595 216.332 147.607 \
-	    215.769 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 165.371 241.067 165.371 \
-	    241.067 164.921 243.878 164.921 246.239 163.46 \
-	    246.689 161.211 247.251 160.649 247.251 160.199 \
-	    244.44 160.199 243.878 160.199 243.428 160.199 \
-	    242.079 160.199 240.167 160.199 239.718 159.749 \
-	    239.268 160.199 237.806 159.749 237.357 159.749 \
-	    236.007 159.749 230.835 159.749 229.824 159.749 \
-	    228.924 159.749 226.113 159.749 225.664 159.749 \
-	    223.752 159.749 222.853 159.749 218.58 159.749 \
-	    218.13 159.749 217.681 160.199 217.231 161.661 \
-	    216.781 162.11 216.781 162.56 216.781 163.46 216.781 \
-	    164.022 219.142 163.46 222.403 163.46 222.853 163.46 \
-	    224.202 163.46 225.664 163.46 226.563 163.46 227.013 \
-	    163.46 228.924 163.01 230.835 163.01 232.634 163.46 \
-	    233.197 164.022 232.634 164.472 232.634 164.921 \
-	    232.185 164.921 231.735 165.371 231.735 165.821 \
-	    232.185 165.371 233.646 165.821 236.007 165.371 \
-	    238.256 165.371 238.818 165.371 240.617 165.371 \
-	    241.067 -fill $pengcolor -outline {} -width 1  -tags logo
-
-    $c create polygon 165.821 214.42 166.833 215.32 \
-	    166.271 215.32 165.821 216.332 165.371 216.332 \
-	    165.371 216.781 165.821 217.681 165.821 218.13 \
-	    165.371 219.142 165.371 220.042 164.921 222.853 \
-	    165.371 224.764 164.921 225.664 165.371 227.575 \
-	    165.371 228.474 164.921 228.474 164.472 227.575 \
-	    164.472 226.113 164.022 224.764 164.472 224.202 \
-	    164.472 223.752 164.472 222.403 164.921 214.87 \
-	    164.472 213.521 164.472 212.959 164.472 212.509 \
-	    164.022 212.509 163.46 212.509 163.01 212.959 162.56 \
-	    212.959 161.661 212.959 161.211 212.059 161.211 \
-	    211.609 160.649 211.609 160.199 209.698 160.649 \
-	    208.349 163.46 206.437 164.472 206.437 165.821 \
-	    207.899 165.821 208.349 166.833 210.148 166.833 \
-	    210.71 165.821 211.609 165.371 212.059 165.371 \
-	    212.959 165.821 213.97 165.821 214.42 -fill $pengcolor \
-	    -outline {} -width 1  -tags logo
-
-    $c create polygon 201.462 248.6 201.462 249.05 \
-	    201.012 249.05 200.563 249.05 200.001 248.6 199.551 \
-	    248.6 198.651 247.7 197.752 247.251 196.74 246.689 \
-	    196.29 245.789 194.379 244.89 194.379 244.44 194.379 \
-	    242.529 193.929 242.079 193.479 240.617 193.479 \
-	    240.167 193.929 239.718 193.479 239.268 193.03 \
-	    236.457 192.58 234.096 192.58 233.197 192.58 231.735 \
-	    192.58 223.302 192.58 221.391 192.13 220.941 191.568 \
-	    221.953 189.769 226.113 189.319 226.563 189.319 \
-	    227.013 188.757 228.025 188.307 228.474 188.757 \
-	    228.474 185.497 234.096 185.047 234.995 184.597 \
-	    236.457 184.147 236.457 184.147 236.907 184.147 \
-	    237.357 183.136 239.268 182.686 239.268 182.686 \
-	    239.718 182.236 240.167 181.786 241.067 181.337 \
-	    242.529 180.887 242.529 180.887 243.878 179.425 \
-	    245.789 178.975 246.689 178.076 246.689 178.076 \
-	    247.251 177.064 247.7 175.715 247.7 175.265 247.7 \
-	    174.703 247.7 174.253 247.251 174.253 246.689 \
-	    174.253 245.789 173.804 242.079 174.253 242.079 \
-	    173.804 241.629 173.804 241.067 173.804 238.818 \
-	    173.804 237.806 173.804 236.457 173.354 234.546 \
-	    173.354 233.197 173.804 232.634 173.804 232.185 \
-	    173.804 231.735 173.804 228.924 173.354 227.575 \
-	    173.804 227.575 173.804 225.664 173.804 225.214 \
-	    173.804 224.764 173.804 223.302 173.804 217.231 \
-	    174.253 216.332 174.703 215.769 178.526 214.87 \
-	    179.425 215.32 179.425 216.332 179.425 217.681 \
-	    179.425 218.58 178.975 219.142 178.526 220.492 \
-	    178.526 220.941 178.076 221.391 178.076 221.953 \
-	    178.076 225.664 177.514 226.563 177.514 228.025 \
-	    177.064 228.474 177.064 228.924 177.064 230.835 \
-	    177.514 236.457 177.064 237.806 177.514 237.806 \
-	    177.514 238.818 177.514 240.617 177.514 241.067 \
-	    178.076 241.629 178.526 241.629 179.425 241.067 \
-	    179.875 240.617 179.875 240.167 180.325 239.268 \
-	    181.337 238.256 182.236 236.457 183.698 234.546 \
-	    184.147 233.197 185.497 230.835 186.509 229.824 \
-	    187.408 227.575 187.408 227.013 187.408 226.563 \
-	    187.858 225.664 188.307 225.214 188.757 224.764 \
-	    188.757 224.202 189.319 222.403 190.219 220.941 \
-	    191.118 217.681 192.13 215.769 194.379 214.87 \
-	    194.941 214.87 196.74 214.42 196.74 215.769 196.29 \
-	    215.769 196.29 216.332 196.29 216.781 196.74 219.592 \
-	    196.74 220.492 196.29 221.391 196.74 224.764 196.29 \
-	    225.664 196.29 226.113 196.29 227.575 196.74 229.374 \
-	    197.19 235.445 198.202 239.268 198.202 239.718 \
-	    198.202 241.067 198.202 242.529 198.651 242.978 \
-	    199.101 243.878 199.101 244.44 199.551 244.89 \
-	    200.001 246.239 201.462 248.6 -fill $pengcolor -outline \
-	    {} -width 1  -tags logo
-
-    $c create polygon 71.714 185.412 71.714 110.869 \
-	    81.496 110.869 82.845 110.981 83.969 111.431 85.094 \
-	    112.106 86.105 113.118 86.893 114.467 87.567 116.041 \
-	    88.017 117.39 88.242 118.065 88.467 118.852 88.579 \
-	    119.639 88.804 120.538 88.916 121.438 89.029 122.337 \
-	    89.141 123.349 89.254 124.361 89.366 125.485 89.366 \
-	    126.61 89.478 127.734 89.478 128.971 89.478 130.208 \
-	    89.478 131.444 89.478 132.456 89.478 133.468 89.478 \
-	    134.48 89.366 135.492 89.254 136.391 89.254 137.291 \
-	    89.141 138.19 89.029 139.09 88.916 139.877 88.804 \
-	    140.664 88.691 141.451 88.579 142.238 88.354 143.362 \
-	    88.129 144.374 87.904 145.386 87.567 146.398 87.342 \
-	    147.297 87.005 148.197 86.668 148.984 86.218 149.771 \
-	    87.005 151.233 87.342 152.02 87.68 152.919 87.904 \
-	    153.931 88.129 154.943 88.129 155.505 88.354 156.854 \
-	    88.354 157.641 88.354 158.428 88.467 159.328 88.467 \
-	    160.34 88.467 161.352 88.467 162.476 88.579 163.6 \
-	    88.579 164.837 88.579 166.186 88.579 166.973 88.691 \
-	    167.873 88.804 168.885 88.916 169.897 89.029 171.021 \
-	    89.029 172.258 89.029 173.719 89.029 175.068 89.029 \
-	    176.305 89.029 177.542 89.141 178.554 89.141 179.566 \
-	    89.141 180.353 89.141 181.14 89.254 181.814 89.366 \
-	    182.714 89.478 183.051 89.478 185.412 83.857 185.412 \
-	    83.857 184.738 83.744 183.951 83.744 183.276 83.744 \
-	    182.489 83.744 180.803 83.857 179.791 83.857 178.891 \
-	    83.857 177.879 83.857 176.867 83.857 175.743 83.857 \
-	    174.619 83.857 173.27 83.857 172.033 83.744 170.908 \
-	    83.744 170.009 83.632 169.109 83.632 168.322 83.52 \
-	    166.973 83.407 166.524 83.407 166.186 83.407 165.062 \
-	    83.407 164.05 83.295 163.151 83.295 162.251 83.295 \
-	    161.464 83.182 160.789 82.957 159.553 81.945 158.203 \
-	    80.596 157.754 76.886 157.754 76.886 185.412 71.714 \
-	    185.412 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 92.289 148.309 92.289 147.185 \
-	    92.289 146.061 92.289 145.049 92.402 143.924 92.402 \
-	    142.8 92.402 141.788 92.402 140.664 92.514 139.652 \
-	    92.514 138.64 92.627 137.628 92.627 136.616 92.739 \
-	    135.717 92.739 134.705 92.851 133.805 92.964 132.793 \
-	    92.964 131.894 93.076 130.995 93.301 129.196 93.414 \
-	    128.409 93.526 127.509 93.639 126.722 93.751 125.935 \
-	    93.863 125.148 93.976 124.361 94.313 122.787 94.426 \
-	    122.112 94.65 121.325 94.763 120.651 95.1 119.301 \
-	    95.55 117.615 96.112 116.041 96.674 114.692 97.236 \
-	    113.455 97.799 112.443 98.361 111.544 99.035 110.757 \
-	    99.71 110.082 100.385 109.632 101.059 109.295 \
-	    101.846 109.07 102.633 108.958 104.207 109.295 \
-	    104.882 109.632 105.556 110.082 106.231 110.757 \
-	    106.906 111.544 107.468 112.443 108.03 113.455 \
-	    108.592 114.692 109.154 116.041 109.604 117.615 \
-	    110.054 119.301 110.279 119.976 110.616 121.325 \
-	    110.841 122.112 110.953 122.787 111.178 123.574 \
-	    111.403 125.148 111.628 125.935 111.74 126.722 \
-	    111.853 127.622 111.965 128.409 112.078 129.308 \
-	    112.19 130.208 112.302 130.995 112.415 132.006 \
-	    112.64 133.805 112.752 134.817 112.865 135.717 \
-	    112.977 136.729 112.977 137.741 113.089 138.752 \
-	    113.089 139.764 113.202 140.776 113.202 141.788 \
-	    113.314 142.912 113.314 143.924 113.314 145.049 \
-	    113.427 146.061 113.427 147.185 113.427 148.309 \
-	    113.427 149.546 113.314 150.783 113.314 151.907 \
-	    113.314 153.032 113.314 154.156 113.202 155.28 \
-	    113.202 156.405 113.089 157.529 113.089 158.541 \
-	    112.977 159.553 112.865 160.565 112.752 161.576 \
-	    112.64 162.588 112.527 163.6 112.415 164.5 112.302 \
-	    165.512 112.19 166.411 112.078 167.311 111.965 \
-	    168.21 111.853 169.109 111.628 169.897 111.515 \
-	    170.796 111.403 171.583 111.178 172.37 111.066 \
-	    173.157 110.616 174.731 110.504 175.518 110.279 \
-	    176.193 110.054 176.98 109.604 178.666 109.154 \
-	    180.128 108.592 181.59 108.03 182.826 107.468 \
-	    183.951 106.906 184.963 106.231 185.75 105.556 \
-	    186.424 104.882 186.986 104.207 187.436 103.42 \
-	    187.661 102.633 187.661 101.846 187.661 101.059 \
-	    187.436 100.385 186.986 99.71 186.424 99.035 185.75 \
-	    98.361 184.963 97.799 183.951 97.236 182.826 96.674 \
-	    181.59 96.112 180.128 95.55 178.666 95.1 176.98 \
-	    94.988 176.193 94.763 175.518 94.538 174.731 94.426 \
-	    173.944 94.088 172.37 93.976 171.583 93.863 170.796 \
-	    93.639 169.897 93.526 169.109 93.414 168.21 93.301 \
-	    167.311 93.189 166.411 93.076 165.512 92.964 164.5 \
-	    92.964 163.6 92.851 162.588 92.739 161.576 92.627 \
-	    160.565 92.627 159.553 92.514 158.541 92.514 157.529 \
-	    92.514 156.405 92.402 155.28 92.402 154.156 92.402 \
-	    153.032 92.289 151.907 92.289 150.783 92.289 149.546 \
-	    92.289 148.309 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 121.859 110.869 127.481 \
-	    110.869 134.902 185.412 129.28 185.412 127.931 \
-	    171.808 120.847 171.808 119.948 185.412 114.326 \
-	    185.412 121.859 110.869 -fill #000000 -outline {} \
-	    -width 1  -tags logo
-
-    $c create polygon 137.263 185.412 137.263 \
-	    110.869 147.157 110.869 148.394 110.981 149.518 \
-	    111.431 150.417 112.106 151.317 113.118 152.104 \
-	    114.467 152.778 116.041 153.228 117.39 153.341 \
-	    118.065 153.566 118.852 153.903 120.538 154.015 \
-	    121.438 154.128 122.337 154.24 123.349 154.353 \
-	    124.361 154.465 125.485 154.465 126.61 154.577 \
-	    127.734 154.577 128.971 154.577 130.208 154.577 \
-	    131.444 154.577 132.456 154.577 133.468 154.577 \
-	    134.48 154.577 135.492 154.577 136.391 154.577 \
-	    137.291 154.577 138.19 154.465 139.09 154.465 \
-	    139.877 154.353 140.664 154.24 141.451 154.128 \
-	    142.238 153.903 143.362 153.678 144.374 153.341 \
-	    145.386 153.003 146.398 152.554 147.297 152.216 \
-	    148.197 151.767 148.984 151.317 149.771 152.104 \
-	    151.233 152.441 152.02 152.778 152.919 153.003 \
-	    153.931 153.228 154.943 153.341 155.505 153.453 \
-	    156.854 153.566 157.641 153.678 158.428 153.79 \
-	    159.328 153.903 160.34 154.015 161.352 154.015 \
-	    162.476 154.128 163.6 154.128 164.837 154.128 \
-	    166.186 154.128 166.973 154.128 167.873 154.128 \
-	    168.885 154.128 169.897 154.128 171.021 154.128 \
-	    172.258 154.128 173.719 154.24 175.068 154.24 \
-	    176.305 154.353 177.542 154.353 178.554 154.465 \
-	    179.566 154.577 180.353 154.69 181.14 154.69 181.814 \
-	    154.915 182.714 155.027 183.051 155.027 185.412 \
-	    149.405 185.412 149.405 184.738 149.293 183.951 \
-	    149.293 183.276 149.181 182.489 149.181 180.803 \
-	    149.068 179.791 149.068 178.891 149.068 177.879 \
-	    149.068 176.867 148.956 175.743 148.956 174.619 \
-	    148.956 173.27 148.956 172.033 148.956 170.908 \
-	    148.956 170.009 148.956 169.109 148.956 168.322 \
-	    148.956 166.973 148.956 166.524 148.956 166.186 \
-	    148.956 165.062 148.843 164.05 148.731 163.151 \
-	    148.618 162.251 148.506 161.464 148.394 160.789 \
-	    148.056 159.553 147.269 158.203 146.145 157.754 \
-	    142.435 157.754 142.435 185.412 137.263 185.412 \
-	    -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 158.4 185.412 158.4 110.869 \
-	    164.022 110.869 164.022 185.412 158.4 185.412 -fill \
-	    #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 168.182 185.412 168.182 \
-	    110.869 173.804 110.869 177.514 135.267 177.739 \
-	    136.054 177.851 136.954 177.964 137.853 178.076 \
-	    138.752 178.301 139.539 178.413 140.439 178.526 \
-	    141.338 178.751 143.137 178.975 144.037 179.088 \
-	    144.824 179.2 145.723 179.313 146.623 179.425 147.41 \
-	    179.538 148.422 179.763 149.321 179.875 150.333 \
-	    180.1 151.233 180.212 152.132 180.437 153.032 180.55 \
-	    154.043 180.774 154.943 180.887 155.842 180.999 \
-	    156.742 181.224 157.754 181.337 158.653 181.337 \
-	    157.641 181.224 156.629 181.224 155.617 181.224 \
-	    154.606 181.224 153.594 181.112 152.582 181.112 \
-	    151.682 181.112 150.67 180.999 149.771 180.999 \
-	    148.759 180.999 147.86 180.887 146.96 180.887 \
-	    145.948 180.887 145.049 180.887 144.149 180.887 \
-	    143.25 180.887 142.125 180.887 141.114 180.887 \
-	    140.102 180.887 139.09 180.887 138.078 180.887 \
-	    137.178 180.887 136.166 180.887 135.267 180.887 \
-	    134.368 180.887 133.468 180.887 132.569 180.887 \
-	    131.669 180.887 130.882 180.887 130.095 180.887 \
-	    110.869 185.946 110.869 185.946 185.412 180.325 \
-	    185.412 176.165 160.565 176.052 159.778 175.94 \
-	    158.99 175.827 158.203 175.602 156.517 175.49 \
-	    155.617 175.378 154.718 175.265 153.931 175.153 \
-	    153.032 175.04 152.02 174.928 151.12 174.703 150.221 \
-	    174.591 149.321 174.478 148.422 174.366 147.41 \
-	    174.141 146.51 174.028 145.611 173.804 144.599 \
-	    173.691 143.587 173.579 142.575 173.354 141.676 \
-	    173.241 140.551 173.017 139.539 172.904 138.528 \
-	    172.904 139.539 172.904 140.551 173.017 141.563 \
-	    173.017 142.575 173.017 143.587 173.129 144.599 \
-	    173.129 145.498 173.129 146.51 173.241 147.41 \
-	    173.241 148.422 173.241 149.321 173.354 150.221 \
-	    173.354 151.233 173.354 152.132 173.354 153.144 \
-	    173.354 154.156 173.354 155.055 173.354 156.067 \
-	    173.354 156.967 173.354 157.866 173.354 158.766 \
-	    173.354 159.553 173.354 160.452 173.354 161.239 \
-	    173.354 162.026 173.354 162.926 173.354 185.412 \
-	    168.182 185.412 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 206.184 185.412 205.622 \
-	    175.968 205.397 177.092 205.172 178.217 204.948 \
-	    179.228 204.61 180.128 204.385 181.027 204.048 \
-	    181.814 203.823 182.489 203.486 183.164 203.149 \
-	    183.838 202.811 184.4 202.024 185.75 201.125 186.762 \
-	    200.113 187.436 199.101 187.661 198.089 187.549 \
-	    197.19 186.986 196.29 186.087 195.391 184.85 194.941 \
-	    184.176 194.491 183.389 194.042 182.489 193.592 \
-	    181.477 193.255 180.465 192.805 179.341 192.467 \
-	    178.217 192.13 176.98 191.905 176.193 191.68 175.406 \
-	    191.568 174.619 191.456 173.832 191.231 172.932 \
-	    191.118 172.145 191.006 171.246 190.781 169.559 \
-	    190.669 168.66 190.556 167.648 190.444 166.748 \
-	    190.331 165.736 190.219 164.725 190.106 163.825 \
-	    189.994 162.926 189.994 162.026 189.882 161.127 \
-	    189.769 160.227 189.769 159.215 189.657 158.316 \
-	    189.544 157.304 189.544 156.405 189.432 155.393 \
-	    189.432 154.381 189.319 153.369 189.319 152.357 \
-	    189.319 151.345 189.319 150.333 189.319 149.321 \
-	    189.319 148.197 189.319 146.96 189.319 145.948 \
-	    189.319 144.824 189.319 143.7 189.319 142.688 \
-	    189.432 141.563 189.432 140.551 189.544 139.539 \
-	    189.544 138.528 189.544 137.516 189.657 136.504 \
-	    189.769 135.492 189.769 134.592 189.882 133.581 \
-	    189.994 132.681 189.994 131.782 190.106 130.882 \
-	    190.219 129.983 190.331 129.083 190.556 127.397 \
-	    190.669 126.61 190.781 125.823 191.006 124.923 \
-	    191.118 124.136 191.231 123.462 191.568 121.887 \
-	    191.793 121.213 191.905 120.426 192.13 119.751 \
-	    192.58 117.952 193.142 116.378 193.704 114.917 \
-	    194.266 113.567 194.941 112.443 195.616 111.431 \
-	    196.29 110.532 196.965 109.857 197.752 109.295 \
-	    198.426 108.845 199.214 108.62 200.001 108.508 \
-	    201.799 108.958 202.699 109.407 203.374 110.194 \
-	    204.161 111.094 204.835 112.218 205.51 113.567 \
-	    206.184 115.141 206.634 116.491 206.859 117.165 \
-	    206.971 117.952 207.421 119.526 207.534 120.426 \
-	    207.758 121.325 207.871 122.225 207.983 123.124 \
-	    208.096 124.136 208.208 125.036 208.321 126.047 \
-	    208.433 127.172 208.545 128.184 208.658 129.308 \
-	    208.77 130.32 208.77 131.557 208.883 132.681 208.995 \
-	    133.805 204.273 133.805 204.161 132.681 203.936 \
-	    131.557 203.711 130.432 203.486 129.533 203.261 \
-	    128.633 202.924 127.734 202.699 126.947 202.362 \
-	    126.385 201.35 124.586 200.001 124.024 199.438 \
-	    124.136 198.989 124.361 198.426 124.923 197.977 \
-	    125.598 197.527 126.497 197.077 127.622 196.628 \
-	    128.971 196.29 130.545 196.178 131.219 195.953 \
-	    132.681 195.84 133.356 195.728 134.143 195.616 \
-	    134.93 195.503 135.829 195.278 137.516 195.278 \
-	    138.303 195.166 139.315 195.166 140.214 195.053 \
-	    141.114 195.053 142.125 194.941 143.137 194.941 \
-	    144.149 194.941 145.161 194.941 146.173 194.941 \
-	    147.297 194.941 148.309 194.941 149.546 194.941 \
-	    150.67 194.941 151.907 194.941 152.919 195.053 \
-	    154.043 195.053 155.168 195.166 156.18 195.166 \
-	    157.192 195.278 158.091 195.391 159.103 195.391 \
-	    160.002 195.503 160.902 195.616 161.801 195.728 \
-	    162.588 195.84 163.375 196.065 164.162 196.178 \
-	    164.949 196.29 165.736 196.628 167.198 197.077 \
-	    168.547 197.527 169.672 197.977 170.571 198.426 \
-	    171.246 198.989 171.808 199.438 172.145 200.001 \
-	    172.258 200.9 171.92 201.575 171.246 202.249 170.009 \
-	    202.811 168.547 203.149 167.76 203.374 166.973 \
-	    203.598 166.186 203.823 165.399 204.048 164.5 \
-	    204.273 163.488 204.385 162.476 204.498 161.464 \
-	    204.61 160.34 204.723 159.103 200.001 159.103 \
-	    200.001 145.049 209.445 145.049 209.445 185.412 \
-	    206.184 185.412 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 148.506 261.305 148.506 \
-	    263.554 143.784 263.554 143.784 261.305 143.671 \
-	    260.068 143.334 259.394 142.772 259.056 141.985 \
-	    258.944 141.085 259.056 140.523 259.394 140.074 \
-	    261.755 140.074 263.104 140.523 264.678 141.085 \
-	    265.465 141.985 266.364 146.145 270.637 147.607 \
-	    271.874 148.506 272.998 148.843 274.01 148.956 \
-	    275.359 148.956 277.158 148.843 278.507 148.506 \
-	    279.632 147.944 280.643 147.157 281.43 146.482 \
-	    281.88 145.695 282.218 144.796 282.442 143.784 \
-	    282.667 142.659 282.78 141.535 282.78 140.298 282.78 \
-	    139.286 282.78 138.387 282.667 137.6 282.442 136.925 \
-	    282.218 136.363 281.88 135.576 281.093 135.014 \
-	    280.194 134.564 278.957 134.452 277.608 134.452 \
-	    275.359 139.624 275.359 139.624 277.608 139.736 \
-	    279.069 140.074 279.969 141.535 280.419 142.659 \
-	    280.081 143.334 279.519 143.671 278.62 143.784 \
-	    277.158 143.784 275.809 143.671 275.022 143.334 \
-	    274.235 142.772 273.448 141.985 272.548 137.263 \
-	    267.376 136.251 266.364 135.351 265.465 135.014 \
-	    264.565 134.902 263.554 134.902 261.755 135.014 \
-	    260.518 135.464 259.506 136.026 258.719 136.813 \
-	    257.932 137.488 257.595 138.275 257.145 139.174 \
-	    256.92 140.186 256.695 141.31 256.583 142.435 \
-	    256.583 143.447 256.583 144.458 256.583 145.245 \
-	    256.695 145.92 256.92 147.157 257.482 147.719 \
-	    258.157 148.169 258.944 148.394 260.068 148.506 \
-	    261.305 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 165.821 270.187 165.821 \
-	    276.708 165.821 277.833 165.708 278.957 165.483 \
-	    279.856 165.259 280.643 164.921 281.318 164.472 \
-	    281.88 163.909 282.218 163.235 282.555 162.448 \
-	    282.667 161.548 282.78 160.536 282.78 159.3 282.78 \
-	    158.175 282.78 157.051 282.78 156.151 282.667 \
-	    155.364 282.555 154.69 282.218 154.128 281.88 \
-	    153.678 281.318 153.341 280.643 153.116 279.856 \
-	    152.891 278.845 152.778 277.833 152.778 276.708 \
-	    152.778 270.187 152.778 269.063 152.891 268.051 \
-	    153.116 267.264 153.341 266.589 154.128 265.465 \
-	    155.364 264.678 156.151 264.453 157.051 264.228 \
-	    158.063 264.116 159.3 264.116 160.424 264.116 \
-	    161.548 264.228 162.448 264.453 163.235 264.678 \
-	    163.909 265.015 164.472 265.465 164.921 265.915 \
-	    165.483 267.264 165.708 268.051 165.821 269.063 \
-	    165.821 270.187 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 177.514 256.583 177.514 \
-	    258.494 177.064 258.494 176.165 258.606 175.715 \
-	    258.944 175.378 259.281 175.265 259.843 175.265 \
-	    264.565 177.514 264.565 177.514 266.927 175.265 \
-	    266.927 175.265 282.78 170.543 282.78 170.543 \
-	    266.927 168.632 266.927 168.632 264.565 170.543 \
-	    264.565 170.543 261.305 170.655 259.843 170.993 \
-	    258.606 171.442 257.707 171.892 257.032 173.579 \
-	    256.358 174.703 256.133 176.165 256.133 176.727 \
-	    256.133 177.064 256.133 177.514 256.583 -fill \
-	    #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 185.946 259.843 185.946 \
-	    264.565 188.757 264.565 188.757 266.927 185.946 \
-	    266.927 185.946 278.62 186.171 279.407 186.509 \
-	    279.969 187.071 280.306 187.858 280.419 188.307 \
-	    280.419 188.757 280.419 188.757 282.78 188.645 \
-	    282.78 188.307 282.78 187.183 282.78 186.509 282.78 \
-	    185.159 282.78 183.923 282.555 182.911 282.33 \
-	    182.236 281.88 181.786 281.206 181.561 280.419 \
-	    181.337 279.407 181.337 278.17 181.337 266.927 \
-	    179.425 266.927 179.425 264.565 181.337 264.565 \
-	    181.337 261.305 185.946 259.843 -fill #000000 \
-	    -outline {} -width 1  -tags logo
-
-    $c create polygon 190.219 264.565 194.379 \
-	    264.565 196.29 279.519 196.74 279.519 199.101 \
-	    264.565 204.723 264.565 207.084 279.519 207.534 \
-	    279.519 209.895 264.565 213.605 264.565 209.895 \
-	    282.78 204.723 282.78 201.912 267.376 201.462 \
-	    267.376 199.101 282.78 193.479 282.78 190.219 \
-	    264.565 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 229.121 269.175 229.121 282.78 \
-	    224.848 282.78 224.848 280.981 224.061 281.768 \
-	    223.049 282.33 221.925 282.667 220.688 282.78 \
-	    219.564 282.78 218.44 282.555 217.54 282.33 216.866 \
-	    281.88 216.528 281.318 216.191 280.531 216.079 \
-	    279.632 215.966 278.62 215.966 275.359 216.079 \
-	    274.347 216.978 272.998 217.877 272.548 218.44 \
-	    272.211 219.114 271.986 219.789 271.761 220.688 \
-	    271.536 221.588 271.424 222.6 271.311 223.724 \
-	    271.199 224.848 271.087 224.848 269.175 224.736 \
-	    267.826 224.399 266.927 223.612 266.477 222.487 \
-	    266.364 221.7 266.477 221.138 266.927 220.688 \
-	    268.726 220.688 269.175 216.416 269.175 216.528 \
-	    267.938 216.753 266.702 217.203 265.69 217.877 \
-	    265.015 218.44 264.678 219.114 264.453 219.901 \
-	    264.228 220.801 264.116 221.925 264.116 223.049 \
-	    264.116 224.061 264.116 225.073 264.116 225.86 \
-	    264.228 226.535 264.453 227.659 265.015 228.334 \
-	    265.69 228.783 266.702 229.008 267.938 229.121 \
-	    269.175 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 243.175 264.565 243.175 \
-	    266.927 242.725 266.927 241.601 266.927 240.701 \
-	    267.151 239.914 267.489 239.352 267.826 239.015 \
-	    268.276 238.678 268.95 238.565 269.737 238.453 \
-	    270.637 238.453 282.78 233.731 282.78 233.731 \
-	    264.565 238.453 264.565 238.453 265.915 239.352 \
-	    265.128 240.364 264.565 242.163 264.116 242.725 \
-	    264.565 243.175 264.565 -fill #000000 -outline {} \
-	    -width 1  -tags logo
-
-    $c create polygon 258.129 270.187 258.129 \
-	    274.347 249.696 274.347 249.696 278.17 249.809 \
-	    279.294 250.146 279.969 250.708 280.643 251.607 \
-	    280.981 252.732 280.643 253.406 279.969 253.744 \
-	    279.294 253.969 278.17 253.969 276.708 258.129 \
-	    276.708 258.129 277.608 258.129 278.957 257.904 \
-	    280.081 257.454 281.093 256.779 281.88 256.217 \
-	    282.218 254.643 282.667 253.744 282.78 252.732 \
-	    282.78 251.607 282.78 250.371 282.78 249.359 282.78 \
-	    248.459 282.667 247.672 282.442 246.436 281.88 \
-	    245.986 281.318 245.649 280.643 245.424 279.856 \
-	    245.199 278.957 245.086 277.833 244.974 276.708 \
-	    244.974 270.187 245.086 269.063 245.199 268.051 \
-	    245.311 267.264 245.649 266.589 245.986 265.915 \
-	    246.436 265.465 246.998 265.015 247.672 264.678 \
-	    248.459 264.453 249.359 264.228 250.371 264.116 \
-	    251.607 264.116 252.732 264.116 253.744 264.228 \
-	    254.756 264.453 255.543 264.678 256.217 265.015 \
-	    256.779 265.465 257.229 265.915 257.566 266.589 \
-	    257.791 267.264 258.016 268.051 258.129 269.063 \
-	    258.129 270.187 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 272.183 256.583 277.355 \
-	    256.583 277.355 282.78 272.183 282.78 272.183 \
-	    256.583 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 295.569 268.726 295.569 282.78 \
-	    290.959 282.78 290.959 269.175 290.847 268.051 \
-	    290.509 267.376 289.947 266.702 289.048 266.364 \
-	    287.923 266.702 287.136 267.376 287.024 268.051 \
-	    287.136 269.175 287.136 282.78 282.527 282.78 \
-	    282.527 264.565 286.687 264.565 287.136 265.915 \
-	    288.036 265.128 289.048 264.565 290.172 264.228 \
-	    291.409 264.116 292.533 264.116 293.433 264.341 \
-	    294.107 264.565 294.669 265.015 295.344 266.477 \
-	    295.569 267.489 295.569 268.726 -fill #000000 \
-	    -outline {} -width 1  -tags logo
-
-    $c create polygon 312.434 269.737 312.434 \
-	    270.637 308.274 270.637 308.274 269.175 308.161 \
-	    267.826 307.824 266.927 307.262 266.477 306.363 \
-	    266.364 305.576 266.477 305.013 266.927 304.676 \
-	    267.826 304.564 269.175 304.564 278.17 304.676 \
-	    279.294 305.013 279.969 306.363 280.981 307.262 \
-	    280.643 307.824 279.969 307.937 279.294 307.824 \
-	    278.17 307.824 276.259 312.434 276.259 312.434 \
-	    277.608 312.434 278.957 312.209 280.081 311.759 \
-	    281.093 311.085 281.88 310.523 282.218 309.173 \
-	    282.667 308.386 282.78 307.374 282.78 306.363 282.78 \
-	    305.238 282.78 304.226 282.78 303.327 282.667 \
-	    302.427 282.442 301.753 282.218 301.191 281.88 \
-	    300.853 281.318 300.516 280.643 300.179 279.856 \
-	    299.954 278.957 299.841 277.833 299.841 276.708 \
-	    299.841 270.187 299.841 269.063 299.954 268.051 \
-	    300.179 267.264 300.404 266.589 301.191 265.465 \
-	    302.427 264.678 303.327 264.453 304.226 264.228 \
-	    305.238 264.116 306.363 264.116 307.374 264.116 \
-	    308.386 264.228 309.173 264.453 309.96 264.678 \
-	    310.523 265.015 311.085 265.465 311.759 266.252 \
-	    312.209 267.264 312.434 268.388 312.434 269.737 \
-	    -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 316.706 279.069 320.866 \
-	    279.069 320.866 282.78 316.706 282.78 316.706 \
-	    279.069 -fill #000000 -outline {} -width 1  -tags logo
-
-    $c create polygon 48.215 186.312 48.215 185.412 \
-	    47.766 184.4 47.766 183.501 47.316 183.501 47.316 \
-	    182.601 46.416 181.59 46.416 181.14 45.967 180.24 \
-	    45.405 179.791 44.955 179.228 44.055 178.329 43.606 \
-	    177.879 43.156 177.43 42.144 176.98 41.694 176.418 \
-	    41.245 175.968 38.883 175.068 36.972 174.169 36.522 \
-	    174.169 35.173 173.607 34.723 174.169 31.913 173.607 \
-	    31.913 174.169 29.551 173.607 29.551 174.169 28.54 \
-	    174.169 28.09 174.619 27.19 174.169 27.19 174.619 \
-	    26.741 174.619 25.729 175.068 23.93 175.518 22.918 \
-	    175.068 22.468 175.518 20.669 176.418 19.657 176.418 \
-	    15.048 178.779 14.036 179.228 12.686 180.24 12.237 \
-	    180.69 11.225 181.59 10.775 182.039 10.325 182.601 \
-	    10.775 182.601 10.325 184.4 10.775 184.85 11.225 \
-	    186.312 14.036 188.223 14.485 188.673 16.846 190.022 \
-	    17.296 190.472 17.296 191.034 15.947 191.933 15.048 \
-	    192.383 14.485 192.833 14.036 193.283 13.136 193.845 \
-	    12.237 194.295 12.686 195.644 12.686 196.094 12.237 \
-	    197.555 12.237 198.005 11.675 198.904 12.237 200.816 \
-	    12.237 202.277 12.237 204.526 11.675 205.988 12.237 \
-	    205.988 12.237 206.437 12.237 207.337 12.686 208.349 \
-	    12.686 209.248 13.136 209.698 12.686 211.16 13.136 \
-	    212.509 13.136 213.521 13.586 215.32 13.586 216.781 \
-	    13.586 217.681 14.036 220.492 14.485 222.403 15.048 \
-	    222.853 15.947 222.853 15.947 222.403 16.397 221.953 \
-	    16.846 216.781 17.296 215.32 17.858 211.609 18.308 \
-	    210.71 18.308 210.148 18.308 209.248 17.858 208.798 \
-	    17.858 207.899 18.308 206.437 18.308 205.538 18.308 \
-	    205.088 18.308 203.627 16.846 203.627 15.947 203.177 \
-	    15.947 202.727 15.947 202.277 16.397 201.715 16.846 \
-	    201.715 17.858 201.715 18.308 201.715 18.758 201.265 \
-	    18.308 200.816 17.858 199.916 18.308 198.455 17.858 \
-	    198.455 17.858 193.283 19.208 192.383 20.107 191.933 \
-	    21.569 191.484 22.018 191.484 22.918 192.383 22.918 \
-	    192.833 23.48 192.833 23.93 198.005 23.48 199.467 \
-	    23.93 202.277 25.279 202.277 29.551 202.727 30.001 \
-	    202.277 30.901 202.277 31.913 202.277 35.623 201.265 \
-	    36.522 201.265 36.972 200.816 37.984 200.816 38.883 \
-	    200.816 39.333 200.366 40.345 199.916 40.795 199.916 \
-	    42.594 198.455 44.055 198.005 44.055 197.555 44.505 \
-	    197.105 46.416 195.644 46.416 194.744 46.866 194.295 \
-	    47.316 193.845 47.766 193.283 47.316 192.833 48.215 \
-	    190.472 48.215 190.022 48.215 189.572 48.215 188.673 \
-	    48.215 187.211 48.215 186.762 48.215 186.312 -fill \
-	    $bg -outline {} -width 1  -tags logo
-
-    $c create polygon 76.886 142.688 81.046 142.688 \
-	    82.508 142.35 83.407 140.889 83.632 140.327 83.969 \
-	    138.865 84.082 137.965 84.194 137.066 84.307 136.054 \
-	    84.307 134.93 84.307 133.805 84.307 132.456 84.194 \
-	    131.332 84.082 130.208 83.857 129.308 83.632 128.409 \
-	    83.407 127.734 82.395 126.272 81.046 125.823 76.886 \
-	    125.823 76.886 142.688 -fill $bg -outline {} -width \
-	    1  -tags logo
-
-    $c create polygon 97.461 148.309 97.461 149.546 \
-	    97.461 150.783 97.461 152.02 97.574 153.144 97.574 \
-	    154.268 97.686 155.28 97.686 156.405 97.799 157.416 \
-	    97.799 158.316 97.911 159.328 98.023 160.227 98.136 \
-	    161.127 98.361 162.701 98.473 163.488 98.586 164.275 \
-	    98.698 164.949 98.81 165.736 99.373 167.535 99.822 \
-	    169.109 100.497 170.234 101.059 171.133 101.846 \
-	    171.583 102.633 171.808 104.095 171.133 104.769 \
-	    170.234 105.332 169.109 105.894 167.535 106.343 \
-	    165.736 106.456 164.949 106.681 164.275 106.793 \
-	    163.488 106.906 162.701 107.018 161.914 107.243 \
-	    160.227 107.355 159.328 107.355 158.316 107.468 \
-	    157.416 107.58 156.405 107.58 155.28 107.693 154.268 \
-	    107.693 153.144 107.693 152.02 107.693 150.783 \
-	    107.805 149.546 107.805 148.309 107.805 147.073 \
-	    107.693 145.836 107.693 144.711 107.693 143.587 \
-	    107.693 142.463 107.58 141.338 107.58 140.327 \
-	    107.468 139.315 107.355 138.303 107.355 137.403 \
-	    107.243 136.504 107.131 135.604 106.906 133.918 \
-	    106.793 133.131 106.681 132.456 106.456 131.669 \
-	    106.343 130.995 105.894 129.196 105.332 127.622 \
-	    104.769 126.497 104.095 125.598 103.42 125.148 \
-	    102.633 124.923 101.846 125.148 101.059 125.598 \
-	    100.497 126.497 99.822 127.622 99.373 129.196 98.81 \
-	    130.995 98.698 131.669 98.586 132.456 98.473 133.131 \
-	    98.361 133.918 98.248 134.817 98.023 136.504 97.911 \
-	    137.403 97.799 138.303 97.799 139.315 97.686 140.327 \
-	    97.686 141.338 97.574 142.463 97.574 143.587 97.461 \
-	    144.711 97.461 145.836 97.461 147.073 97.461 148.309 \
-	    -fill $bg -outline {} -width 1  -tags logo
-
-    $c create polygon 122.309 156.292 126.919 \
-	    156.292 124.67 130.545 122.309 156.292 -fill $bg \
-	    -outline {} -width 1  -tags logo
-
-    $c create polygon 142.435 142.688 146.145 \
-	    142.688 147.607 142.35 148.506 140.889 148.731 \
-	    140.327 149.068 138.865 149.181 137.965 149.293 \
-	    137.066 149.405 136.054 149.405 134.93 149.405 \
-	    133.805 149.405 132.456 149.405 131.332 149.405 \
-	    130.208 149.293 129.308 149.181 128.409 148.956 \
-	    127.734 148.056 126.272 146.595 125.823 142.435 \
-	    125.823 142.435 142.688 -fill $bg -outline {} -width \
-	    1  -tags logo
-
-    $c create polygon 111.515 228.924 111.515 \
-	    227.575 111.066 225.664 108.705 221.391 108.255 \
-	    220.042 108.255 219.142 108.255 218.58 108.255 \
-	    218.13 107.805 217.681 106.793 218.58 104.994 \
-	    220.941 104.432 221.953 102.633 224.202 102.183 \
-	    224.764 101.621 225.214 99.822 228.474 97.461 \
-	    233.197 97.461 234.096 97.461 234.995 97.911 235.445 \
-	    98.361 236.007 99.822 236.457 102.633 236.457 \
-	    104.432 235.445 105.894 234.995 106.343 234.546 \
-	    106.793 234.546 107.805 233.646 110.616 230.835 \
-	    111.515 229.824 111.515 229.374 111.515 228.924 \
-	    -fill $bg -outline {} -width 1  -tags logo
-
-    $c create polygon 161.211 269.175 160.986 \
-	    267.826 160.649 266.927 160.199 266.477 159.3 \
-	    266.364 158.4 266.477 157.838 266.927 157.613 \
-	    267.826 157.388 269.175 157.388 278.17 157.613 \
-	    279.294 157.838 279.969 159.3 280.981 160.199 \
-	    280.643 160.649 279.969 160.986 279.294 161.211 \
-	    278.17 161.211 269.175 -fill $bg -outline {} -width \
-	    1  -tags logo
-
-    $c create polygon 224.848 273.448 223.836 \
-	    273.448 222.825 273.56 222.15 273.673 221.588 \
-	    273.897 220.913 274.684 220.688 275.809 220.688 \
-	    278.17 220.801 279.294 221.138 279.969 221.7 280.643 \
-	    222.487 280.981 223.612 280.643 224.399 279.969 \
-	    224.736 279.294 224.848 278.17 224.848 273.448 -fill \
-	    $bg -outline {} -width 1  -tags logo
-
-    $c create polygon 253.969 269.175 253.744 \
-	    267.826 253.406 266.927 252.732 266.477 251.607 \
-	    266.364 250.708 266.477 250.146 266.927 249.696 \
-	    269.175 249.696 272.548 253.969 272.548 253.969 \
-	    269.175 -fill $bg -outline {} -width 1  -tags logo
-
-}
-
-#***********************************************************************
-# %PROCEDURE: LoadConnectionInfo
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Loads the connection information into the global ConnectionInfo variable
-#***********************************************************************
-proc LoadConnectionInfo {} {
-    global ConnectionInfoFile ConnectionInfo PasswordFile
-    set ConnectionInfo {}
-    if {![file exists $ConnectionInfoFile]} {
-	return
-    }
-    set problem [catch {
-	set fp [open $ConnectionInfoFile "r"]
-	while {1} {
-	    if {[gets $fp line] < 0} {
-		break
-	    }
-	    set line [string trim $line]
-	    if {[string match "#*" $line]} {
-		continue
-	    }
-	    if {"$line" == ""} {
-		continue
-	    }
-	    set ConnectionInfo $line
-	    break
-	}
-	close $fp
-    } err]
-    if {$problem} {
-	tk_dialog .err Error "Error loading configuration file: $err" error 0 OK
-    }
-    # Try loading and merging passwords if the password file is readable
-    if {![file readable $PasswordFile]} {
-	return
-    }
-
-    set fp [open $PasswordFile "r"]
-    while {1} {
-	if {[gets $fp line] < 0} {
-	    break
-	}
-	set line [string trim $line]
-	if {[string match "#*" $line]} {
-	    continue
-	}
-	if {"$line" == ""} {
-	    continue
-	}
-	set passwords $line
-	break
-    }
-    close $fp
-
-    # Merge passwords
-    foreach thing $passwords {
-	set name [value $thing ConnectionName]
-	set password [value $thing Password]
-	set conn [GetConnection $name]
-	if {"$conn" != ""} {
-	    lappend conn Password $password
-	    ReplaceConnection $conn
-	}
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetConnection
-# %ARGUMENTS:
-#  name -- name of connection
-# %RETURNS:
-#  key/value pair listing connection configuration, or "" if not found.
-#***********************************************************************
-proc GetConnection { name } {
-    global ConnectionInfo
-    foreach thing $ConnectionInfo {
-	if {[value $thing ConnectionName] == "$name"} {
-	    return $thing
-	}
-    }
-    return ""
-}
-    
-
-#***********************************************************************
-# %PROCEDURE: DeleteConnection
-# %ARGUMENTS:
-#  name -- name of connection
-# %RETURNS:
-#  Nothing, but deletes connection named "$name"
-#***********************************************************************
-proc DeleteConnection { name } {
-    global ConnectionInfo ConfigDir
-    set newInfo {}
-    set found 0
-    foreach thing $ConnectionInfo {
-	if {[value $thing ConnectionName] == "$name"} {
-	    set found 1
-	} else {
-	    lappend newInfo $thing
-	}
-    }
-    if {!$found} {
-	return
-    }
-    set ConnectionInfo $newInfo
-    SaveConnectionInfo
-
-    # Delete the config file
-    set fname [file join $ConfigDir conf.$name]
-    catch { file delete $fname }
-
-    BuildConnectionMenu
-    if {[GetCurrentConnection] == $name} {
-	if {[llength $ConnectionInfo] == 0} {
-	    SwitchConnection ""
-	} else {
-	    set name [value [lindex $ConnectionInfo 0] ConnectionName]
-	    SwitchConnection $name
-	}
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: ReplaceConnection
-# %ARGUMENTS:
-#  conn -- new name/value pairs
-# %RETURNS:
-#  Nothing, but replaces connection in ConnectionInfo.  If no such
-#  connection exists, appends new connection.
-#***********************************************************************
-proc ReplaceConnection { conn } {
-    global ConnectionInfo
-    set name [value $conn ConnectionName]
-    set newInfo {}
-    set found 0
-    foreach thing $ConnectionInfo {
-	if {[value $thing ConnectionName] == "$name"} {
-	    lappend newInfo $conn
-	    set found 1
-	} else {
-	    lappend newInfo $thing
-	}
-    }
-    if {!$found} {
-	lappend newInfo $conn
-    }
-    set ConnectionInfo $newInfo
-}
-
-proc DeletePPPoEConnection {} {
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	return
-    }
-    set ans [tk_dialog .confirm "Confirm Deletion - RP-PPPoE" "Are you sure you wish to delete the connection `$conn'?" warning 0 No Yes]
-    if {$ans} {
-	DeleteConnection $conn
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: CreateMainDialog
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Creates the main window
-#***********************************************************************
-proc CreateMainDialog {} {
-    global ConnectionInfoFile
-    global ConnectionInfo
-    global Admin
-    wm title . "RP-PPPoE"
-    wm iconname . "PPPoE"
-    frame .f1
-    label .l1 -text "Connection: "
-    menubutton .m1 -text "" -indicatoron 1 -menu .m1.menu -relief raised
-    menu .m1.menu -tearoff 0
-    pack .l1 .m1 -in .f1 -side left -expand 0 -fill x
-    canvas .c -width 40 -height 20
-    pack .c -in .f1 -side left -expand 0 -fill none
-
-    # Draw the LED's
-    .c create rectangle 10 1 30 8 -outline "#808080" -fill "#A0A0A0" -tags xmitrect
-    .c create rectangle 10 10 30 18 -outline "#808080" -fill "#A0A0A0" -tags recvrect
-
-    frame .buttons
-    button .start -text "Start" -command "StartPPPoEConnection"
-    button .stop -text "Stop" -command "StopPPPoEConnection"
-    button .exit -text "Exit" -command "exit"
-    canvas .graph -width 1 -height 1
-    if {[file writable $ConnectionInfoFile]} {
-	set Admin 1
-	pack .f1 -side top -expand 1 -fill both
-	pack .buttons -side top -expand 0 -fill x
-	button .delete -text "Delete" -command "DeletePPPoEConnection"
-	button .new -text "New Connection..." -command "NewPPPoEConnection"
-	button .props -text "Properties..." -command "EditConnectionProps"
-	pack .graph -in .f1 -side left -expand 1 -fill both
-	pack .start .stop .delete .props .new .exit -in .buttons -side left -expand 0 -fill none
-    } else {
-	set Admin 0
-	pack .f1 -side top -expand 0 -fill x
-	pack .buttons -side top -expand 1 -fill both
-	pack .start .stop .exit -in .buttons -side left -expand 0 -fill none
-	pack .graph -in .buttons -side left -expand 1 -fill both
-    }
-
-    LoadConnectionInfo
-    BuildConnectionMenu
-    # If no connections exist, pop up new connection dialog
-    if {[llength $ConnectionInfo] == 0} {
-	SwitchConnection ""
-	if {$Admin} {
-	    update idletasks
-	    NewPPPoEConnection
-	} else {
-	    tk_dialog .note Note "Note: There are no connections defined.  You must run this program as root to define connections" warning 0 OK
-	}
-    } else {
-	set con [lindex $ConnectionInfo 0]
-	set name [value $con ConnectionName]
-	SwitchConnection $name
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetCurrentConnection
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  The name of the current connection in the GUI.
-#***********************************************************************
-proc GetCurrentConnection {} {
-    .m1 cget -text
-}
-
-#***********************************************************************
-# %PROCEDURE: value
-# %ARGUMENTS:
-#  lst -- a list of key/value pairs
-#  key -- key we're looking for
-# %RETURNS:
-#  value corresponding to $key, or "" if not found.
-#***********************************************************************
-proc value { lst key } {
-    set idx [lsearch -exact $lst $key]
-    if {$idx >= 0} {
-	return [lindex $lst [expr $idx+1]]
-    }
-    return ""
-}
-
-#***********************************************************************
-# %PROCEDURE: SwitchConnection
-# %ARGUMENTS:
-#  name -- new connection name
-# %DESCRIPTION:
-#  Makes $name the active connection
-#***********************************************************************
-proc SwitchConnection { name } {
-    .m1 configure -text $name
-    SetButtonStates
-    UpdateConnectionState 0
-}
-
-#***********************************************************************
-# %PROCEDURE: EditConnectionProps
-# %ARGUMENTS:
-#  None
-# %DESCRIPTION:
-#  Pops up edit window for current connection
-#***********************************************************************
-proc EditConnectionProps {} {
-    global ConnectionInfo
-    set conn [GetCurrentConnection]
-    NewPPPoEConnection $conn
-}
-
-#***********************************************************************
-# %PROCEDURE: FillConnectionGui
-# %ARGUMENTS:
-#  w -- connection property GUI
-#  name -- name of connection
-# %DESCRIPTION:
-#  Fills GUI with values corresponding to $name.
-#***********************************************************************
-proc FillConnectionGui { w name } {
-    global ConnectionInfo
-    set found [GetConnection $name]
-    if {"$found" != ""} {
-	ListToSetupGui $w $found
-    }
-}
-    
-#***********************************************************************
-# %PROCEDURE: BuildConnectionMenu
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Builds the connection menu
-#***********************************************************************
-proc BuildConnectionMenu {} {
-    global ConnectionInfo
-    .m1.menu delete 0 end
-    foreach connection $ConnectionInfo {
-	set name [value $connection ConnectionName]
-	.m1.menu add command -label $name -command [list SwitchConnection $name]
-    }
-    .m1.menu add separator
-    .m1.menu add command -label "User's Manual" -command Help
-}
-
-#***********************************************************************
-# %PROCEDURE: SetButtonStates
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Enables or disables buttons, as appropriate
-#***********************************************************************
-proc SetButtonStates {} {
-    global Admin
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	.start configure -state disabled
-	.stop configure -state disabled
-	catch {
-	    .delete configure -state disabled
-	    .props configure -state disabled
-	    .new configure -state normal
-	}
-    } else {
-	foreach {startstop updown interface} [GetConnectionStatus $conn] {break}
-	if {"$startstop" == "started"} {
-	    .start configure -state disabled
-	    .stop configure -state normal
-	} else {
-	    .start configure -state normal
-	    .stop configure -state disabled
-	}
-	catch {
-	    .delete configure -state normal
-	    .props configure -state normal
-	    .new configure -state normal
-	}
-	if {!$Admin} {
-	    set ok [value [GetConnection $conn] NonrootOK]
-	    if {!$ok} {
-		.start configure -state disabled
-		.stop configure -state disabled
-	    }
-	}
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: GetEthernetInterfaces
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  A list of Ethernet interfaces
-#***********************************************************************
-proc GetEthernetInterfaces {} {
-    set ifs {}
-    set fp [open "|/sbin/ifconfig" "r"]
-    while {[gets $fp line] >= 0} {
-	if {[regexp {^eth[0-9]+} $line eth]} {
-	    lappend ifs $eth
-	}
-    }
-    return $ifs
-}
-
-#***********************************************************************
-# %PROCEDURE: StartPPPoEConnection
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Starts currently-selected PPPoE connection.
-#***********************************************************************
-proc StartPPPoEConnection {} {
-    global Wrapper
-    global StartState
-    global UpdateToken
-
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	return
-    }
-
-    if {"$UpdateToken" != ""} {
-	after cancel $UpdateToken
-	set UpdateToken ""
-    }
-
-    catch { unset StartState }
-    set StartState(chars) ""
-    set StartState(status) ""
-    set StartState(msg) ""
-    set StartState(flip) 0
-
-    set fp [open "|$Wrapper start $conn" "r"]
-
-    # Set fileevent
-    fileevent $fp readable [list StartFPReadable $fp]
-
-    LockGui $fp
-    vwait StartState(status)
-    UnlockGui
-
-    if {$StartState(status) == "failed"} {
-	tk_dialog .err Error "Error starting connection: $StartState(msg)" error 0 OK
-    }
-    SetButtonStates
-    UpdateConnectionState 0
-}
-
-proc LockGui { fp } {
-    .start configure -state disabled
-    .stop configure -state normal -command [list AbortConnection $fp]
-    .exit configure -state disabled
-    .m1 configure -state disabled
-    grab set .stop
-}
-
-proc UnlockGui {} {
-    .start configure -state normal
-    .stop configure -state disabled -command StopPPPoEConnection
-    .exit configure -state normal
-    .m1 configure -state normal
-    grab release .stop
-}
-
-proc AbortConnection { fp } {
-    global StartState
-    catch { StopPPPoEConnection }
-    catch { close $fp }
-    set StartState(msg) "Connection aborted by user"
-    set StartState(status) "failed"
-}
-    
-#***********************************************************************
-# %PROCEDURE: StartFPReadable
-# %ARGUMENTS:
-#  fp -- file handle
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Called when the "adsl-start" file handle is readable.
-#***********************************************************************
-proc StartFPReadable { fp } {
-    global StartState
-    set char [read $fp 1]
-    if {$char == ""} {
-	set uhoh [catch {close $fp} err]
-	if {$uhoh} {
-	    set StartState(status) "failed"
-	    set StartState(msg) $err
-	} else {
-	    set StartState(status) "succeeded"
-	}
-	return
-    }
-    append StartState(chars) $char
-    if {$StartState(flip)} {
-	ConnectionStateDown
-    } else {
-	ConnectionStateOff
-    }
-    set StartState(flip) [expr 1 - $StartState(flip)]
-}
-
-#***********************************************************************
-# %PROCEDURE: StopPPPoEConnection
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Stops currently-selected PPPoE connection.
-#***********************************************************************
-proc StopPPPoEConnection {} {
-    global Wrapper
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	return
-    }
-    set fp [open "|$Wrapper stop $conn" "r"]
-    while {1} {
-	set char [read $fp 1]
-	if {"$char" == ""} {
-	    break;
-	}
-    }
-    set uhoh [catch {close $fp} err]
-    if {$uhoh} {
-	# Ignore a common error
-	if {![string match "*appears to have died*" $err]} {
-	    tk_dialog .err Error "Error stopping connection: $err" error 0 OK
-	}
-    }
-    SetButtonStates
-    UpdateConnectionState 0
-}
-
-#***********************************************************************
-# %PROCEDURE: NewPPPoEConnection
-# %ARGUMENTS:
-#  name -- if supplied, we're editing the existing connection "name"
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Creates a new PPPoE connection
-#***********************************************************************
-proc NewPPPoEConnection {{name ""}} {
-    set w .newcon
-    if {[winfo exists $w]} {
-	wm deiconify $w
-	raise $w
-	return
-    }
-
-    toplevel $w
-    if {"$name" == ""} {
-	wm title $w "New Connection - RP-PPPoE"
-	wm iconname $w "New Connection"
-    } else {
-	wm title $w "Edit Connection - RP-PPPoE"
-	wm iconname $w "Edit Connection"
-    }
-    wm withdraw $w
-
-    tabnotebook_create $w.tn
-    set basic [tabnotebook_page $w.tn "Basic"]
-    set interface [tabnotebook_page $w.tn "NIC and DNS"]
-    set opts [tabnotebook_page $w.tn "Options"]
-    set advanced [tabnotebook_page $w.tn "Advanced"]
-
-    # ----------- BASIC PAGE -------------
-    label $w.lconName -text "Connection Name: " -anchor e
-    if {"$name" != ""} {
-	label $w.conName -text $name -anchor w
-    } else {
-	entry $w.conName -width 15
-	RegisterHelpWindow $w.lconName "Enter a name for this connection.  It can contain letters, numbers, undescores and the minus-sign." $w.help
-	RegisterHelpWindow $w.conName "Enter a name for this connection.  It can contain letters, numbers, undescores and the minus-sign." $w.help
-    }
-
-    label $w.luser -text "User Name: " -anchor e
-    entry $w.user -width 15
-    RegisterHelpWindow $w.luser "Enter your user name.  Do not add a domain-name after the user name." $w.help
-    RegisterHelpWindow $w.user "Enter your user name.  Do not add a domain-name after the user name." $w.help
-
-    label $w.lnet -text "Network: " -anchor e
-    entry $w.network -width 15
-    RegisterHelpWindow $w.lnet "Some ISP's require you to enter their domain-name here (e.g. \"sympatico.ca\")." $w.help
-    RegisterHelpWindow $w.network "Some ISP's require you to enter their domain-name here (e.g. \"sympatico.ca\")." $w.help
-
-    label $w.lpass -text "Password: " -anchor e
-    entry $w.pass -width 15 -show "*"
-    RegisterHelpWindow $w.lpass "Enter your password." $w.help
-    RegisterHelpWindow $w.pass "Enter your password." $w.help
-
-    grid $w.lconName $w.conName -in $basic -sticky nsew
-    grid $w.luser $w.user -in $basic -sticky nsew
-    grid $w.lnet $w.network -in $basic -sticky nsew
-    grid $w.lpass $w.pass -in $basic -sticky nsew
-    grid columnconfigure $basic 1 -weight 1
-
-    # ----------- INTERFACES PAGE -------------
-    set ifs {}
-    catch {set ifs [GetEthernetInterfaces]}
-
-    label $w.lifname -text "Ethernet Interface: " -anchor e
-    entry $w.ifname -width 8
-    RegisterHelpWindow $w.lifname "Enter Ethernet interface to which DSL modem is attached." $w.help
-    RegisterHelpWindow $w.ifname "Enter Ethernet interface to which DSL modem is attached." $w.help
-
-    if {[llength $ifs] > 0} {
-	menubutton $w.ifmb -relief raised -text "..." -menu $w.ifmb.menu
-	RegisterHelpWindow $w.ifmb "Browse detected Ethernet interface names." $w.help
-	menu $w.ifmb.menu -tearoff 0
-	foreach if $ifs {
-	    $w.ifmb.menu add command -label $if -command "$w.ifname delete 0 end; $w.ifname insert end [list $if]"
-	}
-	grid $w.lifname $w.ifname $w.ifmb -in $interface -sticky nsew
-    } else {
-	grid $w.lifname $w.ifname - -in $interface -sticky nsew
-    }
-
-    label $w.ldns -text "DNS Setup: " -anchor e
-    menubutton $w.dns -text "From Server" -menu $w.dns.menu -relief raised -indicatoron 1
-    menu $w.dns.menu -tearoff 0
-    foreach thing {"From Server" "Specify" "Do not Adjust"} {
-	$w.dns.menu add command -label $thing -command [list SetDNSOption $w $thing]
-    }
-    RegisterHelpWindow $w.ldns "DNS server options:\n'From Server'   - Let PPPoE server specify DNS servers\n'Specify'       - Enter IP addresses of DNS servers yourself\n'Do not Adjust' - Leave your DNS setup alone." $w.help
-    RegisterHelpWindow $w.dns "DNS server options:\n'From Server'   - Let PPPoE server specify DNS servers\n'Specify'       - Enter IP addresses of DNS servers yourself\n'Do not Adjust' - Leave your DNS setup alone." $w.help
-
-    label $w.ldns1 -text "Primary DNS: " -anchor e
-    entry $w.dns1 -width 16
-    RegisterHelpWindow $w.ldns1 "Enter the IP address of the primary DNS server." $w.help
-    RegisterHelpWindow $w.dns1 "Enter the IP address of the primary DNS server." $w.help
-    label $w.ldns2 -text "Secondary DNS: " -anchor e
-    entry $w.dns2 -width 16
-    RegisterHelpWindow $w.ldns2 "Enter the IP address of the secondary DNS server." $w.help
-    RegisterHelpWindow $w.dns2 "Enter the IP address of the secondary DNS server." $w.help
-
-    SetDNSOption $w "From Server"
-    grid $w.ldns $w.dns - -in $interface -sticky nsew
-    grid $w.ldns1 $w.dns1 - -in $interface -sticky nsew
-    grid $w.ldns2 $w.dns2 - -in $interface -sticky nsew
-
-    # If only one Ethernet interface, select it by default
-    if {[llength $ifs] == 1} {
-	$w.ifname insert end [lindex $ifs 0]
-    }
-
-    grid columnconfigure $interface 1 -weight 1
-    # ----------- OPTS PAGE -------------
-    checkbutton $w.nonroot -text "Allow use by non-root users" -variable OPTS(nonroot) -anchor w
-    RegisterHelpWindow $w.nonroot "If enabled, ordinary users can start and stop this connection." $w.help
-    checkbutton $w.sync -text "Use synchronous PPP" -variable OPTS(sync) -anchor w
-    RegisterHelpWindow $w.sync "Use synchronous PPP (recommended -- easier on the CPU.)" $w.help
-    label $w.lfw -text "Firewalling: " -anchor e
-    if {[llength $ifs] == 1} {
-	set defaultFW "Stand-Alone"
-    } else {
-	set defaultFW "Masquerading"
-    }
-    menubutton $w.fw -text $defaultFW -menu $w.fw.menu -indicatoron 1 -relief raised
-    menu $w.fw.menu -tearoff 0
-    foreach type {Stand-Alone Masquerading None} {
-	$w.fw.menu add command -label $type -command [list $w.fw configure -text $type]
-    }
-    
-    RegisterHelpWindow $w.lfw "Firewalling options:\nStand-Alone  - A stand-alone machine.\nMasquerading - A gateway machine used for Internet sharing.\nNone         - Use if you already have your own firewall rules or want to run servers." $w.help
-    RegisterHelpWindow $w.fw "Firewalling options:\nStand-Alone  - A stand-alone machine.\nMasquerading - A gateway machine used for Internet sharing.\nNone         - Use if you already have your own firewall rules or want to run servers." $w.help
-    grid $w.nonroot - -in $opts -sticky nsew
-    grid $w.sync - -in $opts -sticky nsew
-    grid $w.lfw $w.fw -in $opts -sticky nsw
-    grid columnconfigure $opts 1 -weight 1
-
-    # ----------- ADVANCED PAGE -------------
-    label $w.lsn -text "Service-Name: " -anchor e
-    entry $w.servicename -width 24
-
-    label $w.lac -text "AC-Name: " -anchor e
-    entry $w.acname -width 24
-
-    RegisterHelpWindow $w.lac "Enter access concentrator name if required.  Most ISPs do not require this; try leaving it blank." $w.help
-    RegisterHelpWindow $w.acname "Enter access concentrator name if required.  Most ISPs do not require this; try leaving it blank." $w.help
-    grid $w.lsn $w.servicename -in $advanced -sticky nsew
-    grid $w.lac $w.acname -in $advanced -sticky nsew
-    RegisterHelpWindow $w.lsn "Enter service name if required.  Most ISPs do not require this; try leaving it blank." $w.help
-    RegisterHelpWindow $w.servicename "Enter service name if required.  Most ISPs do not require this; try leaving it blank." $w.help
-
-    grid columnconfigure $advanced 1 -weight 1
-
-    # ----------- BUTTONS -------------
-    frame $w.buttons
-    button $w.ok -text "OK" -command [list NewPPPoEConnectionOK $name $w]
-    button $w.cancel -text "Cancel" -command [list destroy $w]
-    pack $w.ok $w.cancel -in $w.buttons -expand 0 -fill none -side left
-
-    pack $w.tn -side top -expand 1 -fill both
-
-    text $w.help -width 60 -wrap word -state disabled -height 6
-    pack $w.help -side top -expand 0 -fill both
-    pack $w.buttons -side top -expand 0 -fill x
-
-    # If we're editing existing connection, fill GUI with current values
-    if {"$name" != ""} {
-	FillConnectionGui $w $name
-    }
-    wm deiconify $w
-    update idletasks
-    raise $w
-}
-
-#***********************************************************************
-# %PROCEDURE: SetDNSOption
-# %ARGUMENTS:
-#  w -- connection-editing window
-#  opt -- value of DNS option
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Adjusts GUI for specified option
-#***********************************************************************
-proc SetDNSOption { w opt } {
-    $w.dns configure -text $opt
-    if {"$opt" == "Specify"} {
-	$w.dns1 configure -state normal -background white
-	$w.dns2 configure -state normal -background white
-    } else {
-	$w.dns1 configure -state disabled -background "#d9d9d9"
-	$w.dns2 configure -state disabled -background "#d9d9d9"
-    }
-}
-
-# ----------------------------------------------------------------------
-# Tabbed notebook code from "Effective Tcl/Tk Programming"
-# ----------------------------------------------------------------------
-#  EXAMPLE: tabnotebook that can dial up pages
-# ----------------------------------------------------------------------
-#  Effective Tcl/Tk Programming
-#    Mark Harrison, DSC Communications Corp.
-#    Michael McLennan, Bell Labs Innovations for Lucent Technologies
-#    Addison-Wesley Professional Computing Series
-# ======================================================================
-#  Copyright (c) 1996-1997  Lucent Technologies Inc. and Mark Harrison
-# ======================================================================
-
-option add *Tabnotebook.tabs.background #666666 widgetDefault
-option add *Tabnotebook.margin 6 widgetDefault
-option add *Tabnotebook.tabColor #a6a6a6 widgetDefault
-option add *Tabnotebook.activeTabColor #d9d9d9 widgetDefault
-option add *Tabnotebook.tabFont \
-    -*-helvetica-bold-r-normal--*-120-* widgetDefault
-
-proc tabnotebook_create {win} {
-    global tnInfo
-
-    frame $win -class Tabnotebook
-    canvas $win.tabs -highlightthickness 0
-    pack $win.tabs -fill x
-
-    notebook_create $win.notebook
-    pack $win.notebook -expand yes -fill both
-
-    set tnInfo($win-tabs) ""
-    set tnInfo($win-current) ""
-    set tnInfo($win-pending) ""
-    return $win
-}
-
-proc tabnotebook_page {win name} {
-    global tnInfo
-
-    set page [notebook_page $win.notebook $name]
-    lappend tnInfo($win-tabs) $name
-
-    if {$tnInfo($win-pending) == ""} {
-        set id [after idle [list tabnotebook_refresh $win]]
-        set tnInfo($win-pending) $id
-    }
-    return $page
-}
-
-proc tabnotebook_refresh {win} {
-    global tnInfo
-
-    $win.tabs delete all
-
-    set margin [option get $win margin Margin]
-    set color [option get $win tabColor Color]
-    set font [option get $win tabFont Font]
-    set x 2
-    set maxh 0
-
-    foreach name $tnInfo($win-tabs) {
-        set id [$win.tabs create text \
-            [expr $x+$margin+2] [expr -0.5*$margin] \
-            -anchor sw -text $name -font $font \
-            -tags [list $name]]
-
-        set bbox [$win.tabs bbox $id]
-        set wd [expr [lindex $bbox 2]-[lindex $bbox 0]]
-        set ht [expr [lindex $bbox 3]-[lindex $bbox 1]]
-        if {$ht > $maxh} {
-            set maxh $ht
-        }
-
-        $win.tabs create polygon 0 0  $x 0 \
-            [expr $x+$margin] [expr -$ht-$margin] \
-            [expr $x+$margin+$wd] [expr -$ht-$margin] \
-            [expr $x+$wd+2*$margin] 0 \
-            2000 0  2000 10  0 10 \
-            -outline black -fill $color \
-            -tags [list $name tab tab-$name]
-
-        $win.tabs raise $id
-
-        $win.tabs bind $name <ButtonPress-1> \
-            [list tabnotebook_display $win $name]
-
-        set x [expr $x+$wd+2*$margin]
-    }
-    set height [expr $maxh+2*$margin]
-    $win.tabs move all 0 $height
-
-    $win.tabs configure -width $x -height [expr $height+4]
-
-    if {$tnInfo($win-current) != ""} {
-        tabnotebook_display $win $tnInfo($win-current)
-    } else {
-        tabnotebook_display $win [lindex $tnInfo($win-tabs) 0]
-    }
-    set tnInfo($win-pending) ""
-}
-
-proc tabnotebook_display {win name} {
-    global tnInfo
-
-    notebook_display $win.notebook $name
-
-    set normal [option get $win tabColor Color]
-    $win.tabs itemconfigure tab -fill $normal
-
-    set active [option get $win activeTabColor Color]
-    $win.tabs itemconfigure tab-$name -fill $active
-    $win.tabs raise $name
-
-    set tnInfo($win-current) $name
-}
-
-# ----------------------------------------------------------------------
-#  EXAMPLE: simple notebook that can dial up pages
-# ----------------------------------------------------------------------
-#  Effective Tcl/Tk Programming
-#    Mark Harrison, DSC Communications Corp.
-#    Michael McLennan, Bell Labs Innovations for Lucent Technologies
-#    Addison-Wesley Professional Computing Series
-# ======================================================================
-#  Copyright (c) 1996-1997  Lucent Technologies Inc. and Mark Harrison
-# ======================================================================
-
-option add *Notebook.borderWidth 2 widgetDefault
-option add *Notebook.relief sunken widgetDefault
-
-proc notebook_create {win} {
-    global nbInfo
-
-    frame $win -class Notebook
-    pack propagate $win 0
-
-    set nbInfo($win-count) 0
-    set nbInfo($win-pages) ""
-    set nbInfo($win-current) ""
-    return $win
-}
-
-proc notebook_page {win name} {
-    global nbInfo
-
-    set page "$win.page[incr nbInfo($win-count)]"
-    lappend nbInfo($win-pages) $page
-    set nbInfo($win-page-$name) $page
-
-    frame $page
-
-    if {$nbInfo($win-count) == 1} {
-        after idle [list notebook_display $win $name]
-    }
-    return $page
-}
-
-proc notebook_display {win name} {
-    global nbInfo
-
-    set page ""
-    if {[info exists nbInfo($win-page-$name)]} {
-        set page $nbInfo($win-page-$name)
-    } elseif {[winfo exists $win.page$name]} {
-        set page $win.page$name
-    }
-    if {$page == ""} {
-        error "bad notebook page \"$name\""
-    }
-
-    notebook_fix_size $win
-
-    if {$nbInfo($win-current) != ""} {
-        pack forget $nbInfo($win-current)
-    }
-    pack $page -expand yes -fill both
-    set nbInfo($win-current) $page
-}
-
-proc notebook_fix_size {win} {
-    global nbInfo
-
-    update idletasks
-
-    set maxw 0
-    set maxh 0
-    foreach page $nbInfo($win-pages) {
-        set w [winfo reqwidth $page]
-        if {$w > $maxw} {
-            set maxw $w
-        }
-        set h [winfo reqheight $page]
-        if {$h > $maxh} {
-            set maxh $h
-        }
-    }
-    set bd [$win cget -borderwidth]
-    set maxw [expr $maxw+2*$bd]
-    set maxh [expr $maxh+2*$bd]
-    $win configure -width $maxw -height $maxh
-}
-
-#***********************************************************************
-# %PROCEDURE: SetupGuiToList
-# %ARGUMENTS:
-#  w -- the PPPoE connection setup window
-# %RETURNS:
-#  A list of (name value) pairs for the connection.
-# %DESCRIPTION:
-#  Reads values from the GUI; makes a list.
-#***********************************************************************
-proc SetupGuiToList { w } {
-    global OPTS
-    set ans {}
-    if {[catch {lappend ans ConnectionName [$w.conName get]}]} {
-	lappend ans ConnectionName [$w.conName cget -text]
-    }
-    lappend ans UserName       [$w.user get]
-    lappend ans NetworkName    [$w.network get]
-    lappend ans Password       [$w.pass get]
-    lappend ans Interface      [$w.ifname get]
-    lappend ans DNSType        [$w.dns cget -text]
-    lappend ans DNS1           [$w.dns1 get]
-    lappend ans DNS2           [$w.dns2 get]
-    lappend ans NonrootOK      $OPTS(nonroot)
-    lappend ans Sync           $OPTS(sync)
-    lappend ans FirewallType   [$w.fw cget -text]
-    lappend ans ServiceName    [$w.servicename get]
-    lappend ans ACName         [$w.acname get]
-
-    # Validate
-    set name [value $ans ConnectionName]
-    if {![regexp -nocase {^[-a-z0-9_]+$} $name]} {
-	error "Connection name must be non-blank and contain only letters, digits, `_' and `-'"
-    }
-
-    # Check DNS
-    set type [value $ans DNSType]
-    if {"$type" == "Specify"} {
-	set dns [value $ans DNS1]
-	if {![regexp {[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+} "$dns"]} {
-	    error "Primary DNS entry must consist of four dot-separated decimal numbers"
-	}
-	set dns [value $ans DNS2]
-	if {"$dns" != "" && ![regexp {[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+} "$dns"]} {
-	    error "Secondary DNS entry must consist of four dot-separated decimal numbers"
-	}
-    }
-    return $ans
-}
-
-#***********************************************************************
-# %PROCEDURE: ListToSetupGui
-# %ARGUMENTS:
-#  w -- the PPPoE connection setup window
-#  lst -- a list of name/value pairs
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Updates GUI to reflect lst
-#***********************************************************************
-proc ListToSetupGui { w lst } {
-    global OPTS
-    foreach {key value} $lst {
-	switch -exact -- $key {
-	    ConnectionName {
-		catch {
-		    $w.conName delete 0 end
-		    $w.conName insert end $value
-		}
-		catch {
-		    $w.conName configure -text $value
-		}
-	    }
-	    UserName {
-		$w.user delete 0 end
-		$w.user insert end $value
-	    }
-	    NetworkName {
-		$w.network delete 0 end
-		$w.network insert end $value
-	    }
-	    Password {
-		$w.pass delete 0 end
-		$w.pass insert end $value
-	    }
-	    Interface {
-		$w.ifname delete 0 end
-		$w.ifname insert end $value
-	    }
-	    DNSType {
-		SetDNSOption $w $value
-	    }
-	    DNS1 {
-		set oldstate [$w.dns1 cget -state]
-		$w.dns1 configure -state normal
-		$w.dns1 delete 0 end
-		$w.dns1 insert end $value
-		$w.dns1 configure -state $oldstate
-	    }
-	    DNS2 {
-		set oldstate [$w.dns2 cget -state]
-		$w.dns2 configure -state normal
-		$w.dns2 delete 0 end
-		$w.dns2 insert end $value
-		$w.dns2 configure -state $oldstate
-	    }
-	    NonrootOK {
-		set OPTS(nonroot) $value
-	    }
-	    Sync {
-		set OPTS(sync) $value
-	    }
-	    FirewallType {
-		$w.fw configure -text $value
-	    }
-	    ServiceName {
-		$w.servicename delete 0 end
-		$w.servicename insert end $value
-	    }
-	    ACName {
-		$w.acname delete 0 end
-		$w.acname insert end $value
-	    }
-	}
-    }
-}
-
-proc NewPPPoEConnectionOK { name w } {
-    if {[catch {set conn [SetupGuiToList $w]} err]} {
-	tk_dialog .err "Invalid Parameters" "$err" error 0 OK
-	return
-    }
-    if {"$name" == ""} {
-	set name [value $conn ConnectionName]
-	set tmp [GetConnection $name]
-	if {"$tmp" != ""} {
-	tk_dialog .err "Connection Exists" "The connection `$name' already exists.  Pick another name." error 0 OK
-	return
-	}
-    }
-    ReplaceConnection $conn
-    SaveConnectionInfo
-    BuildConnectionMenu
-    SwitchConnection $name
-    destroy $w
-}
-
-proc SaveConnectionInfo {} {
-    global ConnectionInfo ConnectionInfoFile PasswordFile
-    set fp [open "$ConnectionInfoFile.new" "w"]
-    puts $fp "# RP-PPPoE GUI Configuration Information."
-    puts $fp "# This file may *look* human-editable, but it is NOT."
-    puts $fp "# So, you with the text editor:  Keep away from this file."
-    puts $fp "#"
-    set expunged {}
-    set passwords {}
-    foreach thing $ConnectionInfo {
-	set name [value $thing ConnectionName]
-	set password [value $thing Password]
-	set pwindex [lsearch -exact $thing Password]
-	set safe [lreplace $thing $pwindex [expr $pwindex+1]]
-	set pwd [list ConnectionName $name Password $password]
-	lappend expunged $safe
-	lappend passwords $pwd
-    }
-    puts $fp $expunged
-    close $fp
-    set fp [open "$PasswordFile.new" "w"]
-    exec chmod 600 "$PasswordFile.new"
-    puts $fp "# RP-PPPoE GUI Configuration Information."
-    puts $fp "# This file may *look* human-editable, but it is NOT."
-    puts $fp "# So, you with the text editor:  Keep away from this file."
-    puts $fp "#"
-    puts $fp $passwords
-    close $fp
-    file rename -force "$ConnectionInfoFile.new" "$ConnectionInfoFile"
-    file rename -force "$PasswordFile.new" "$PasswordFile"
-
-    # Generate config files for adsl-start for each connection
-    foreach thing $ConnectionInfo {
-	GenerateConfigFile $thing
-    }
-
-    # Now update /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
-    foreach thing $ConnectionInfo {
-	GenerateSecretsEntry $thing
-    }
-}
-
-#***********************************************************************
-# %PROCEDURE: ReadShellEscapedWord
-# %ARGUMENTS:
-#  str -- a string
-# %RETURNS:
-#  A two-element list -- the first element is a shell-escaped word
-#  extracted from $str, just the way pppd parses /etc/ppp/pap-secrets.
-#  The second element is the remaining portion of $str
-#***********************************************************************
-proc ReadShellEscapedWord { str } {
-    set ans {}
-    set rest $str
-
-    # Chew up leading spaces
-    set rest [string trimleft $rest]
-
-    # If first char is a quote, read until a quote
-    if {"[string index $rest 0]" == "\""} {
-	set rest [string range $rest 1 end]
-	set nextquote [string first "\"" $rest]
-	# If no following quote, pretend we haven't seen a quote, I guess.
-	if {$nextquote >= 0} {
-	    set ans [string range $rest 0 [expr $nextquote-1]]
-	    set rest [string range $rest [expr $nextquote+1] end]
-	    return [list $ans $rest]
-	}
-    }
-
-    # Not a quote; chew through the string until an unescaped space
-    while {[string length $rest] > 0} {
-	set char [string index $rest 0]
-	set rest [string range $rest 1 end]
-	# Sneaky test for whitespace in Tcl 8.0
-	if {"[string trim $char]" == ""} {
-	    return [list $ans $rest]
-	}
-	if {"$char" == "\\"} {
-	    set char [string index $rest 0]
-	    set rest [string range $rest 1 end]
-	}
-	append ans $char
-    }
-    return [list $ans $rest]
-}
-
-
-#***********************************************************************
-# %PROCEDURE: GenerateSecretsEntry
-# %ARGUMENTS:
-#  conn -- a connection key/value list
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Adds entries to /etc/ppp/pap-secrets and /etc/ppp/chap-secrets.
-#***********************************************************************
-proc GenerateSecretsEntry { conn } {
-    set user [value $conn UserName]
-    set net [value $conn NetworkName]
-    set password [value $conn Password]
-    if {"$net" != ""} {
-	set user "$user@$net"
-    }
-    GenerateSecretsEntryForFile $user $password "/etc/ppp/pap-secrets"
-    GenerateSecretsEntryForFile $user $password "/etc/ppp/chap-secrets"
-}
-
-#***********************************************************************
-# %PROCEDURE: GenerateSecretsEntryForFile
-# %ARGUMENTS:
-#  user -- user name
-#  password -- password
-#  fname -- file to add entry to.
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Adds entries to /etc/ppp/pap-secrets or /etc/ppp/chap-secrets.
-#***********************************************************************
-proc GenerateSecretsEntryForFile { user password fname } {
-    # Copy $fname to $fname.new
-    set out [open "$fname.new" "w"]
-    exec chmod go-rwx "$fname.new"
-    if {[file exists $fname]} {
-	set in [open $fname "r"]
-	while {[gets $in line] >= 0} {
-	    set trimmed [string trim $line]
-	    if {"$trimmed" == ""} {
-		puts $out $line
-		continue
-	    }
-	    if {[string match "#*" $trimmed]} {
-		puts $out $line
-		continue
-	    }
-
-	    # Read the user name off the line; copy it unless it's our
-	    # user name.
-	    foreach {word dummy} [ReadShellEscapedWord $line] {break}
-	    if {$word != $user} {
-		puts $out $line
-	    }
-	}
-	close $in
-    }
-
-    # Now add our line
-    set user [ShellEscape $user]
-    set password [ShellEscape $password]
-    puts $out "$user\t*\t$password\t*"
-    close $out
-    file rename -force $fname.new $fname
-}
-
-#***********************************************************************
-# %PROCEDURE: ShellEscape
-# %ARGUMENTS:
-#  str
-# %RETURNS:
-#  A version of $str with shell meta-characters escaped
-#***********************************************************************
-proc ShellEscape { str } {
-    set ans ""
-    foreach char [split $str ""] {
-	if {[string first $char "01234567890ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz_+=-@./"] >= 0} {
-	    append ans $char
-	} else {
-	    append ans "\\$char"
-	}
-    }
-    return $ans
-}
-
-
-#***********************************************************************
-# %PROCEDURE: GenerateConfigFile
-# %ARGUMENTS:
-#  conn -- a connection key/value list
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Generates a configuration file for adsl-start and friends under
-#  /etc/ppp/rp-pppoe-gui
-#***********************************************************************
-proc GenerateConfigFile { conn } {
-    global ConfigDir
-    set name [value $conn ConnectionName]
-    set fname [file join $ConfigDir conf.$name]
-    set fp [open "$fname.new" w]
-    puts $fp "# Configuration file for connection `$name'."
-    puts $fp "# Automatically generated.  Do not edit by hand."
-    puts $fp ""
-    foreach {var val} $conn {
-	switch -exact $var {
-	    UserName {
-		set net [value $conn NetworkName]
-		if {"$net" != ""} {
-		    set user "$val@$net"
-		} else {
-		    set user "$val"
-		}
-		puts $fp [ShellEscape "USER=$user"]
-	    }
-	    Interface {
-		puts $fp [ShellEscape "ETH=$val"]
-	    }
-	    DNSType {
-		if {"$val" == "From Server"} {
-		    puts $fp "DNSTYPE=SERVER"
-		    puts $fp "USEPEERDNS=yes"
-		} elseif {"$val" == "Specify"} {
-		    puts $fp "DNSTYPE=SPECIFY"
-		    puts $fp "USEPEERDNS=no"
-		} else {
-		    puts $fp "DNSTYPE=NOCHANGE"
-		    puts $fp "USEPEERDNS=no"
-		}
-	    }
-	    DNS1 {
-		puts $fp [ShellEscape "DNS1=$val"]
-	    }
-	    DNS2 {
-		puts $fp [ShellEscape "DNS2=$val"]
-	    }
-	    NonrootOK {
-		if {$val} {
-		    puts $fp "NONROOT=OK"
-		}
-	    }
-	    ACName {
-		puts $fp [ShellEscape "ACNAME=$val"]
-	    }
-	    ServiceName {
-		puts $fp [ShellEscape "SERVICENAME=$val"]
-	    }
-	    FirewallType {
-		if {"$val" == "None"} {
-		    puts $fp "FIREWALL=NONE"
-		} elseif {"$val" == "Masquerading"} {
-		    puts $fp "FIREWALL=MASQUERADE"
-		} else {
-		    puts $fp "FIREWALL=STANDALONE"
-		}
-	    }
-	    Sync {
-		if {$val} {
-		    puts $fp "SYNCHRONOUS=yes"
-		} else {
-		    puts $fp "SYNCHRONOUS=no"
-		}
-	    }
-	}
-    }
-    puts $fp "CONNECT_TIMEOUT=30"
-    puts $fp "CONNECT_POLL=1"
-    puts $fp "FORCEPING=\".\""
-    puts $fp "PIDFILE=/var/run/adsl-$name.pid"
-    puts $fp "CLAMPMSS=1412"
-    puts $fp "LCP_INTERVAL=20"
-    puts $fp "LCP_FAILURE=3"
-    puts $fp "PPPOE_TIMEOUT=80"
-    puts $fp "LINUX_PLUGIN="
-    puts $fp "DEMAND=no"
-    close $fp
-    file rename -force "$fname.new" "$fname"
-}
-
-#***********************************************************************
-# %PROCEDURE: GetConnectionStatus
-# %ARGUMENTS:
-#  conn -- connection name
-# %RETURNS:
-#  A three-element list:
-#  {started/stopped up/down if}
-#  If first element is "started", then connection has been started.
-#  If second element is "up", then connection is up.
-#  If connection is up, third element is PPP interface.
-#***********************************************************************
-proc GetConnectionStatus { conn } {
-    set pidfile "/var/run/adsl-$conn.pid"
-
-    # Check for PID file
-    if {![file readable $pidfile]} {
-	return {stopped down ""}
-    }
-    set fp [open $pidfile "r"]
-    gets $fp pid
-    close $fp
-
-    # Check if process is dead
-    if {![file exists "/proc/$pid"]} {
-	# The pppd might still be running... doh...
-	if {![file readable "$pidfile.pppd"]} {
-	    return {stopped down ""}
-	}
-	set fp [open "$pidfile.pppd" "r"]
-	gets $fp pid
-	close $fp
-	if {![file exists "/proc/$pid"]} {
-	    return {stopped down ""}
-	}
-    }
-
-    # Now get PID of pppd
-    if {![file readable "$pidfile.pppd"]} {
-	return {started down ""}
-    }
-    set fp [open "$pidfile.pppd" "r"]
-    gets $fp pid
-    close $fp
-
-    # Find interface to which it corresponds
-    set pppdfiles [glob -nocomplain "/var/run/ppp*.pid"]
-    set found {}
-    foreach file $pppdfiles {
-	set fp [open $file "r"]
-	gets $fp ifpid
-	close $fp
-	if {$ifpid == $pid} {
-	    set found [file rootname [file tail $file]]
-	    break
-	}
-    }
-    if {"$found" == ""} {
-	return {started down ""}
-    }
-    return [list started up $found]
-}
-
-#***********************************************************************
-# %PROCEDURE: UpdateConnectionState
-# %ARGUMENTS:
-#  fromAfter -- if 1, was called from an "after" callback.
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Updates the "LED" displays; periodically reschedules itself to keep
-#  updating display.
-#***********************************************************************
-proc UpdateConnectionState {{fromAfter 1}} {
-    global UpdateToken
-    global Packets
-    global Bytes
-    global UpdateInterval
-    global MeasureTime
-    if {$fromAfter} {
-	set UpdateToken ""
-    }
-
-    set conn [GetCurrentConnection]
-    if {"$conn" == ""} {
-	ConnectionStateOff
-	ResetGraph
-	if {"$UpdateToken" != ""} {
-	    after cancel $UpdateToken
-	    set UpdateToken {}
-	}
-	return
-    }
-
-    foreach {startstop updown interface} [GetConnectionStatus $conn] {break}
-    if {"$startstop" == "stopped"} {
-	ConnectionStateOff
-	ResetGraph
-    } elseif {"$updown" == "down"} {
-	ConnectionStateDown
-	ResetGraph
-    } else {
-	# Get the packet counts
-	set found 0
-	set fp [open "/proc/net/dev" "r"]
-	while {[gets $fp line] >= 0} {
-	    if {![string match "*$interface:*" $line]} {
-		continue
-	    }
-	    set colon [string first ":" $line]
-	    if {$colon < 0} {
-		continue
-	    }
-	    set line [string range $line [expr $colon+1] end]
-	    set found 1
-	    set MeasureTime [clock seconds]
-	    break
-	}
-	close $fp
-	if {$found} {
-	    foreach {rbytes rpacks rerrs rdrop rfifo rframe rcomp rmulti tbytes tpacks} $line {break}
-	    if {!$fromAfter} {
-		set Packets(in) $rpacks
-		set Packets(out) $tpacks
-		set Bytes(in) $rbytes
-		set Bytes(out) $tbytes
-		ConnectionStateUp
-		ResetGraph
-	    } else {
-		if {$rpacks != $Packets(in)} {
-		    ConnectionReceiveActive
-		} else {
-		    ConnectionReceiveUp
-		}
-		if {$tpacks != $Packets(out)} {
-		    ConnectionTransmitActive
-		} else {
-		    ConnectionTransmitUp
-		}
-		set Packets(in) $rpacks
-		set Packets(out) $tpacks
-		set Bytes(in) $rbytes
-		set Bytes(out) $tbytes
-		UpdateGraph
-	    }
-	} else {
-	    ConnectionStateUp
-	    ResetGraph
-	}
-    }
-    if {"$UpdateToken" == ""} {
-	set UpdateToken [after $UpdateInterval UpdateConnectionState]
-    }
-    if {$fromAfter} {
-	SetButtonStates
-    }
-}
-
-proc ConnectionStateOff {} {
-    .c itemconfigure xmitrect -fill "#A0A0A0"
-    .c itemconfigure recvrect -fill "#A0A0A0"
-}
-
-proc ConnectionStateDown {} {
-    .c itemconfigure xmitrect -fill "#A00000"
-    .c itemconfigure recvrect -fill "#A00000"
-}
-
-proc ConnectionStateUp {} {
-    .c itemconfigure xmitrect -fill "#00D000"
-    .c itemconfigure recvrect -fill "#00D000"
-}
-
-proc ConnectionTransmitActive {} {
-    .c itemconfigure xmitrect -fill "#FFFF00"
-}
-
-proc ConnectionTransmitUp {} {
-    .c itemconfigure xmitrect -fill "#00D000"
-}
-
-proc ConnectionReceiveActive {} {
-    .c itemconfigure recvrect -fill "#FFFF00"
-}
-
-proc ConnectionReceiveUp {} {
-    .c itemconfigure recvrect -fill "#00D000"
-}
-
-proc ResetGraph {} {
-    global GraphPoints
-    set GraphPoints(in) {}
-    set GraphPoints(out) {}
-    set GraphPoints(times) {}
-    .graph delete all
-    UpdateGraph
-}
-
-proc UpdateGraph {} {
-    global GraphPoints Bytes UpdateInterval MeasureTime
-    lappend GraphPoints(times) $MeasureTime
-    lappend GraphPoints(in) $Bytes(in)
-    lappend GraphPoints(out) $Bytes(out)
-
-    set w [winfo width .graph]
-    set w2 [expr $w/2]
-
-    set h [winfo height .graph]
-    set toChop [expr [llength $GraphPoints(in)] - $w2 - 1]
-    if {$toChop > 0} {
-	set GraphPoints(in) [lrange $GraphPoints(in) $toChop end]
-    }
-    set toChop [expr [llength $GraphPoints(out)] - $w2 - 1]
-    if {$toChop > 0} {
-	set GraphPoints(out) [lrange $GraphPoints(out) $toChop end]
-    }
-    set toChop [expr [llength $GraphPoints(times)] - $w2 - 1]
-    if {$toChop > 0} {
-	set GraphPoints(times) [lrange $GraphPoints(times) $toChop end]
-    }
-
-    set prev [lindex $GraphPoints(in) 0]
-    set incoords {}
-    set outcoords {}
-    set inmax 0
-    set outmax 0
-    foreach thing [lrange $GraphPoints(in) 1 end] {
-	set diff [expr $thing - $prev]
-	set prev $thing
-	lappend incoords $diff
-	if {$diff > $inmax} {
-	    set inmax $diff
-	}
-    }
-
-    set prev [lindex $GraphPoints(out) 0]
-    foreach thing [lrange $GraphPoints(out) 1 end] {
-	set diff [expr $thing - $prev]
-	set prev $thing
-	lappend outcoords $diff
-	if {$diff > $outmax} {
-	    set outmax $diff
-	}
-    }
-
-    if {$inmax == 0} { set inmax 1 }
-    if {$outmax == 0} { set outmax 1 }
-    # Draw the transmit line
-    set x 0
-    set hh [expr $h-4]
-    set scaled {}
-    foreach thing $outcoords {
-	lappend scaled $x [expr double($h) - 2 - (double($hh) * double($thing) / double($outmax))]
-	incr x
-    }
-
-    .graph delete all
-    if {[llength $scaled] >= 4} {
-	eval ".graph create line $scaled -fill #A00000"
-	set bits [expr 8.0 * ([lindex $GraphPoints(out) end] - [lindex $GraphPoints(out) 0])]
-	set timediff [expr [lindex $GraphPoints(times) end] - [lindex $GraphPoints(times) 0]]
-	if {$timediff != 0} {
-	    set bps [Pretty [expr double($bits) / $timediff]]
-	    .graph create text 2 2 -anchor nw -font fixed -text "$bps"
-	}
-    }
-
-    # Draw the receive line
-    set x $w2
-    set scaled {}
-    foreach thing $incoords {
-	lappend scaled $x [expr double($h) - 2 - (double($hh) * double($thing) / double($inmax))]
-	incr x
-    }
-
-    if {[llength $scaled] >= 4} {
-	eval ".graph create line $scaled -fill #00A000"
-	set bits [expr 8.0 * ([lindex $GraphPoints(in) end] - [lindex $GraphPoints(in) 0])]
-	set timediff [expr [lindex $GraphPoints(times) end] - [lindex $GraphPoints(times) 0]]
-	if {$timediff != 0} {
-	    set bps [Pretty [expr double($bits) / $timediff]]
-	    .graph create text [expr $w2+2] 2 -anchor nw -font fixed -text "$bps"
-	}
-    }
-}
-
-proc Pretty { n } {
-    if {$n < 0} {
-	return "***"
-    }
-    if {$n < 1000} {
-	return [format "%.1f" $n]
-    }
-    set n [expr $n/1000.0]
-    if {$n < 1000} {
-	return [format "%.1fk" $n]
-    }
-    set n [expr $n/1000.0]
-    if {$n < 1000} {
-	return [format "%.1fM" $n]
-    }
-    set n [expr $n/1000.0]
-    return [format "%.1fG" $n]
-}
-
-#***********************************************************************
-# %PROCEDURE: Help
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Opens help page
-#***********************************************************************
-proc Help {} {
-    if {![file readable /usr/share/rp-pppoe-gui/tkpppoe.html]} {
-	    tk_dialog .err Error "Help file '/usr/share/rp-pppoe-gui/tkpppoe.html' is not installed" error 0 OK	
-	return
-    }
-    catch { exec /bin/sh -c "netscape -remote 'openURL(/usr/share/rp-pppoe-gui/tkpppoe.html)' || netscape /usr/share/rp-pppoe-gui/tkpppoe.html" > /dev/null 2>/dev/null & }
-}
-
-	
-
-#***********************************************************************
-# %PROCEDURE: doLogo
-# %ARGUMENTS:
-#  None
-# %RETURNS:
-#  Nothing
-# %DESCRIPTION:
-#  Does the logo thing
-#***********************************************************************
-proc doLogo {} {
-    global AlreadyRunFile ConfigDir
-    if {[file exists $AlreadyRunFile]} {
-	return
-    }
-    catch { file mkdir $ConfigDir }
-    catch { close [open $AlreadyRunFile "w"] }
-    canvas .c -width 374 -height 286 -bg #FFFFCC
-    pack .c
-    drawLogo .c #FFFFCC
-
-    # Funky effect
-    .c create text 4 4 -anchor nw -text "Welcome to RP-PPPoE" \
-	    -fill red -font {-family times -size -24 -weight bold} -tags pppoe
-    .c lower pppoe
-
-    .c move logo -300 0
-
-    update idletasks
-
-    for {set i 0} {$i < 15} {incr i} {
-	.c move logo 20 0
-	update idletasks
-	after 25
-    }
-
-    .c create text 4 28 -anchor nw -text "http://www.roaringpenguin.com" \
-	    -fill red -font {-family courier -size -14 -weight bold}
-    update idletasks
-    after 2500
-}
-
-doLogo
-catch { destroy .c }
-
-# Try creating an empty config file if none exists
-if {![file readable $ConnectionInfoFile]} {
-    catch { file mkdir $ConfigDir }
-    catch {
-	set fp [open $ConnectionInfoFile "w"]
-	close $fp
-    }
-}
-
-CreateMainDialog
diff --git a/mdk-stage1/rp-pppoe/gui/wrapper.c b/mdk-stage1/rp-pppoe/gui/wrapper.c
deleted file mode 100644
index e2b99662a..000000000
--- a/mdk-stage1/rp-pppoe/gui/wrapper.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/* -*-Mode: C;-*- */
-
-/***********************************************************************
-*
-* wrapper.c
-*
-* C wrapper designed to run SUID root for controlling PPPoE connections.
-*
-* Copyright (C) 2001 by Roaring Penguin Software Inc.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#define _SVID_SOURCE 1 /* For putenv */
-#define _POSIX_SOURCE 1 /* For fileno */
-#define _BSD_SOURCE 1 /* For setreuid */
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-#define CONN_NAME_LEN 64
-#define LINELEN 512
-
-static char const *adsl_start = ADSL_START_PATH;
-static char const *adsl_stop = ADSL_STOP_PATH;
-static char const *adsl_status = ADSL_STATUS_PATH;
-
-/**********************************************************************
- *%FUNCTION: PathOK
- *%ARGUMENTS:
- * fname -- a file name.
- *%RETURNS:
- * 1 if path to fname is secure; 0 otherwise.
- *%DESCRIPTION:
- * Makes sure ownership/permissions of file and parent directories
- * are safe.
- **********************************************************************/
-static int
-PathOK(char const *fname)
-{
-    char path[LINELEN];
-    struct stat buf;
-    char const *slash;
-
-    if (strlen(fname) > LINELEN) {
-	fprintf(stderr, "Pathname '%s' too long\n", fname);
-	return 0;
-    }
-
-    /* Must be absolute path */
-    if (*fname != '/') {
-	fprintf(stderr, "Unsafe path '%s' not absolute\n", fname);
-	return 0;
-    }
-
-    /* Check root directory */
-    if (stat("/", &buf) < 0) {
-	perror("stat");
-	return 0;
-    }
-    if (buf.st_uid) {
-	fprintf(stderr, "SECURITY ALERT: Root directory (/) not owned by root\n");
-	return 0;
-    }
-    if (buf.st_mode & (S_IWGRP | S_IWOTH)) {
-	fprintf(stderr, "SECURITY ALERT: Root directory (/) writable by group or other\n");
-	return 0;
-    }
-
-    /* Check each component */
-    slash = fname;
-
-    while(*slash) {
-	slash = strchr(slash+1, '/');
-	if (!slash) {
-	    slash = fname + strlen(fname);
-	}
-	memcpy(path, fname, slash-fname);
-	path[slash-fname] = 0;
-	if (stat(path, &buf) < 0) {
-	    perror("stat");
-	    return 0;
-	}
-	if (buf.st_uid) {
-	    fprintf(stderr, "SECURITY ALERT: '%s' not owned by root\n", path);
-	    return 0;
-	}
-
-	if (buf.st_mode & (S_IWGRP | S_IWOTH)) {
-	    fprintf(stderr, "SECURITY ALERT: '%s' writable by group or other\n",
-		    path);
-	    return 0;
-	}
-    }
-    return 1;
-}
-
-/**********************************************************************
- *%FUNCTION: CleanEnvironment
- *%ARGUMENTS:
- * envp -- environment passed to main
- *%RETURNS:
- * Nothing
- *%DESCRIPTION:
- * Deletes all environment variables; makes safe environment
- **********************************************************************/
-static void
-CleanEnvironment(char *envp[])
-{
-    envp[0] = NULL;
-    putenv("PATH=/bin:/usr/bin:/sbin:/usr/sbin");
-}
-
-/**********************************************************************
- *%FUNCTION: main
- *%ARGUMENTS:
- * argc, argv -- usual suspects
- * Usage: pppoe-wrapper {start|stop|status} {connection_name}
- *%RETURNS:
- * Whatever adsl-start, adsl-stop or adsl-status returns.
- *%DESCRIPTION:
- * Runs adsl-start, adsl-stop or adsl-status on given connection if
- * non-root users are allowed to do it.
- **********************************************************************/
-int
-main(int argc, char *argv[])
-{
-    int amRoot;
-    char *cp;
-    char fname[64+CONN_NAME_LEN];
-    char line[LINELEN+1];
-    int allowed = 0;
-
-    FILE *fp;
-
-    extern char **environ;
-
-    /* Clean out environment */
-    CleanEnvironment(environ);
-    
-    /* Are we root? */
-    amRoot = (getuid() == 0);
-
-    /* Validate arguments */
-    if (argc != 3) {
-	fprintf(stderr, "Usage: %s {start|stop|status} connection_name\n",
-		argv[0]);
-	exit(1);
-    }
-
-    if (strcmp(argv[1], "start") &&
-	strcmp(argv[1], "stop") &&
-	strcmp(argv[1], "status")) {
-	fprintf(stderr, "Usage: %s {start|stop|status} connection_name\n",
-		argv[0]);
-	exit(1);
-    }
-
-    /* Connection name can be at most CONN_NAME_LEN chars; alpha, num, underscore */
-    if (strlen(argv[2]) > CONN_NAME_LEN) {
-	fprintf(stderr, "%s: Connection name '%s' too long.\n",
-		argv[0], argv[2]);
-	exit(1);
-    }
-
-    for (cp = argv[2]; *cp; cp++) {
-	if (!strchr("abcdefghijklmnopqrstuvwxyz"
-		    "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-		    "0123456789_-", *cp)) {
-	    fprintf(stderr, "%s: Connection name '%s' contains illegal character '%c'\n", argv[0], argv[2], *cp);
-	    exit(1);
-	}
-    }
-
-    /* Open the connection file */
-    sprintf(fname, "/etc/ppp/rp-pppoe-gui/conf.%s", argv[2]);
-    /* Check path sanity */
-    if (!PathOK(fname)) {
-	exit(1);
-    }
-
-    fp = fopen(fname, "r");
-    if (!fp) {
-	fprintf(stderr, "%s: Could not open '%s': %s\n",
-		argv[0], fname, strerror(errno));
-	exit(1);
-    }
-
-    /* Check if non-root users can control it */
-    if (amRoot) {
-	allowed = 1;
-    } else {
-	while (!feof(fp)) {
-	    if (!fgets(line, LINELEN, fp)) {
-		break;
-	    }
-	    if (!strcmp(line, "NONROOT=OK\n")) {
-		allowed = 1;
-		break;
-	    }
-	}
-    }
-    fclose(fp);
-
-    if (!allowed) {
-	fprintf(stderr, "%s: Non-root users are not permitted to control connection '%s'\n", argv[0], argv[2]);
-	exit(1);
-    }
-
-    /* Become root with setuid() to defeat is-root checks in shell scripts */
-    if (setreuid(0, 0) < 0) {
-	perror("setreuid");
-	exit(1);
-    }
-       
-    /* It's OK -- do it.  */
-    if (!strcmp(argv[1], "start")) {
-	if (!PathOK(adsl_start)) exit(1);
-	execl(adsl_start, "adsl-start", fname, NULL);
-    } else if (!strcmp(argv[1], "stop")) {
-	if (!PathOK(adsl_stop)) exit(1);
-	execl(adsl_stop, "adsl-stop", fname, NULL);
-    } else {
-	if (!PathOK(adsl_status)) exit(1);
-	execl(adsl_status, "adsl-status", fname, NULL);
-    }
-    fprintf(stderr, "%s: execl: %s\n", argv[0], strerror(errno));
-    exit(1);
-}
diff --git a/mdk-stage1/rp-pppoe/man/adsl-connect.8 b/mdk-stage1/rp-pppoe/man/adsl-connect.8
deleted file mode 100644
index 1b34a74e5..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-connect.8
+++ /dev/null
@@ -1,66 +0,0 @@
-.\" $Id$
-.TH ADSL-CONNECT 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-connect \- Shell script to manage a PPPoE link
-
-.SH SYNOPSIS
-.B adsl-connect \fR[\fIconfig_file\fR]
-.P
-.B adsl-connect \fR\fIinterface user\fR [\fIconfig_file\fR]
-
-
-.SH DESCRIPTION
-\fBadsl-connect\fR is a shell script which manages an ADSL connection
-using the Roaring Penguin user-space PPPoE client.  If you omit
-\fIconfig_file\fR, the default file \fB/etc/ppp/pppoe.conf\fR is used.
-If you supply \fIinterface\fR and \fIuser\fR, then they override the
-Ethernet interface and user-name settings in the configuration file.
-.P
-Note that normally, you should \fInot\fR invoke \fBadsl-connect\fR
-directly.  Instead, use \fBadsl-start\fR to bring up the ADSL connection.
-.P
-\fBadsl-connect\fR first reads a configuration file.  It then brings
-up a PPPoE connection.  If the connection ever drops, a message is logged
-to syslog, and \fBadsl-connect\fR re-establishes the connection.  In addition,
-each time the connection is dropped or cannot be established,
-\fBadsl-connect\fR executes the script \fB/etc/ppp/adsl-lost\fR if it
-exists and is executable.
-
-.P
-The shell script \fBadsl-stop\fR causes \fBadsl-connect\fR to break out
-of its loop, bring the connection down, and exit.
-
-.SH TECHNICAL DETAILS
-\fBadsl-connect\fR uses the following shell variables from the
-configuration file:
-
-.TP
-.B ETH
-The Ethernet interface connected to the ADSL modem (for example, eth0).
-
-.TP
-.B USER
-The ADSL user-id (for example, b1xxnxnx@sympatico.ca).
-
-.TP
-.B PIDFILE
-A file in which to write the process-ID of the adsl-connect process
-(for example, \fB/var/run/pppoe.pid\fR).  Two additional files
-($PIDFILE.pppd and $PIDFILE.pppoe) hold the process-ID's of the
-\fBpppd\fR and \fBpppoe\fR processes, respectively.
-
-.P
-By using different configuration files with different PIDFILE
-settings, you can manage multiple PPPoE connections.  Just specify the
-configuration file as an argument to \fBadsl-start\fR and
-\fBadsl-stop\fR.
-
-.SH AUTHOR
-\fBadsl-connect\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-stop(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-setup.8 b/mdk-stage1/rp-pppoe/man/adsl-setup.8
deleted file mode 100644
index 9e78fa547..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-setup.8
+++ /dev/null
@@ -1,23 +0,0 @@
-.\" $Id$ 
-.TH ADSL-SETUP 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-setup \- Shell script to configure Roaring Penguin PPPoE client
-.SH SYNOPSIS
-.B adsl-setup
-
-.SH DESCRIPTION
-\fBadsl-setup\fR is a shell script which prompts you for various pieces
-of information and sets up an /etc/ppp/pppoe.conf configuration script
-for the \fBadsl-start\fR, \fBadsl-stop\fR and \fBadsl-connect\fR scripts.
-
-.SH AUTHOR
-\fBadsl-setup\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8),
-pppoe.conf(5), adsl-status(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-start.8 b/mdk-stage1/rp-pppoe/man/adsl-start.8
deleted file mode 100644
index 87250b381..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-start.8
+++ /dev/null
@@ -1,27 +0,0 @@
-.\" $Id$ 
-.TH ADSL-START 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-start \- Shell script to bring up a PPPoE link
-.SH SYNOPSIS
-.B adsl-start \fR[\fIconfig_file\fR]
-.P
-.B adsl-start \fR\fIinterface user\fR [\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-start\fR is a shell script which starts the Roaring Penguin
-user-space PPPoE client.  If you omit \fIconfig_file\fR, the default
-file \fB/etc/ppp/pppoe.conf\fR is used.  If you supply
-\fIinterface\fR and \fIuser\fR, then they override the Ethernet interface
-and user-name settings in the configuration file.
-
-.SH AUTHOR
-\fBadsl-start\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-status.8 b/mdk-stage1/rp-pppoe/man/adsl-status.8
deleted file mode 100644
index 2114d461e..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-status.8
+++ /dev/null
@@ -1,25 +0,0 @@
-.\" $Id$ 
-.TH ADSL-STATUS 8 "16 March 2000"
-.UC 4
-.SH NAME
-adsl-status \- Shell script to report on status of PPPoE link
-.SH SYNOPSIS
-.B adsl-status \fR[\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-status\fR is a shell script which checks the status of the
-PPPoE link established by the Roaring Penguin user-space PPPoE client.
-If you omit \fIconfig_file\fR, the default file
-\fB/etc/ppp/pppoe.conf\fR is used.
-
-.SH AUTHOR
-\fBadsl-status\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-adsl-setup(8), adsl-stop(8), pppoe-sniff(8), pppoe-relay(8),
-pppoe-server(8)
-
-
diff --git a/mdk-stage1/rp-pppoe/man/adsl-stop.8 b/mdk-stage1/rp-pppoe/man/adsl-stop.8
deleted file mode 100644
index 2ac7fef8e..000000000
--- a/mdk-stage1/rp-pppoe/man/adsl-stop.8
+++ /dev/null
@@ -1,21 +0,0 @@
-.\" $Id$ 
-.TH ADSL-STOP 8 "21 February 2000"
-.UC 4
-.SH NAME
-adsl-stop \- Shell script to shut down a PPPoE link
-.SH SYNOPSIS
-.B adsl-stop \fR[\fIconfig_file\fR]
-
-.SH DESCRIPTION
-\fBadsl-stop\fR is a shell script which stops the Roaring Penguin
-user-space PPPoE client.  If you omit \fIconfig_file\fR, the default
-file \fB/etc/ppp/pppoe.conf\fR is used.
-
-.SH AUTHOR
-\fBadsl-stop\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-start(8), adsl-connect(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8), pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-relay.8 b/mdk-stage1/rp-pppoe/man/pppoe-relay.8
deleted file mode 100644
index 5f79b09a1..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-relay.8
+++ /dev/null
@@ -1,124 +0,0 @@
-.\" $Id$ 
-.TH PPPOE-RELAY 8 "26 January 2001"
-.\""
-.UC 4
-.SH NAME
-pppoe-relay \- user-space PPPoE relay agent.
-.SH SYNOPSIS
-.B pppoe-relay \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-relay\fR is a user-space relay agent for PPPoE
-(Point-to-Point Protocol over Ethernet) for Linux.  \fBpppoe-relay\fR
-works in concert with the \fBpppoe\fR client and \fBpppoe-server\fR
-server.  See the OPERATION section later in this manual for
-details on how \fBpppoe-relay\fR works.
-
-.SH OPTIONS
-.TP
-.B \-S \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR.  Only PPPoE servers may be connected to
-this interface.
-
-.TP
-.B \-C \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR.  Only PPPoE clients may be connected to
-this interface.
-
-.TP
-.B \-B \fIinterface\fR
-Adds the Ethernet interface \fIinterface\fR to the list of interfaces
-managed by \fBpppoe-relay\fR.  Both PPPoE clients and servers may be
-connected to this interface.
-
-.TP
-.B \-n \fInum\fR
-Allows at most \fInum\fR concurrent PPPoE sessions.  If not specified,
-the default is 5000.  \fInum\fR can range from 1 to 65534.
-
-.TP
-.B \-i \fItimeout\fR
-Specifies the session idle timeout.  If both peers in a session are idle
-for more than \fItimeout\fR seconds, the session is terminated.
-If \fItimeout\fR is specified as zero, sessions will never be terminated
-because of idleness.
-
-Note that the idle-session expiry routine is never run more frequently than
-every 30 seconds, so the timeout is approximate.  The default value for
-\fItimeout\fR is 600 seconds (10 minutes.)
-
-.TP
-.B \-F
-The \fB\-F\fR option causes \fBpppoe-relay\fR \fInot\fR to fork into the
-background; instead, it remains in the foreground.
-
-.TP
-.B \-h
-The \fB\-h\fR option prints a brief usage message and exits.
-
-.SH OPERATION
-
-\fBpppoe-relay\fR listens for incoming PPPoE PADI frames on all interfaces
-specified with \fB-B\fR or \fB-C\fR options.  When a PADI frame appears,
-\fBpppoe-relay\fR adds a Relay-Session-ID tag and broadcasts the PADI
-on all interfaces specified with \fB-B\fR or \fB-S\fR options (except the
-interface on which the frame arrived.)
-
-Any PADO frames received are relayed back to the client which sent the
-PADI (assuming they contain valid Relay-Session-ID tags.)  Likewise,
-PADR frames from clients are relayed back to the matching access
-concentrator.
-
-When a PADS frame is received, \fBpppoe-relay\fR enters the two peers'
-MAC addresses and session-ID's into a hash table.  (The session-ID seen
-by the access concentrator may be different from that seen by the client;
-\fBpppoe-relay\fR must renumber sessions to avoid the possibility of duplicate
-session-ID's.)  Whenever either peer sends a session frame, \fBpppoe-relay\fR
-looks up the session entry in the hash table and relays the frame to
-the correct peer.
-
-When a PADT frame is received, \fBpppoe-relay\fR relays it to the peer
-and deletes the session entry from its hash table.
-
-If a client and server crash (or frames are lost), PADT frames may never
-be sent, and \fBpppoe-relay\fR's hash table can fill up with stale sessions.
-Therefore, a session-cleaning routine runs periodically, and removes old
-sessions from the hash table.  A session is considered "old" if no traffic
-has been seen within \fItimeout\fR seconds.  When a session is deleted because
-of a timeout, a PADT frame is sent to each peer to make certain that they
-are aware the session has been killed.
-
-.SH EXAMPLE INVOCATIONS
-
-.nf
-pppoe-relay -C eth0 -S eth1
-.fi
-
-The example above relays frames between PPPoE clients on the eth0 network
-and PPPoE servers on the eth1 network.
-
-.nf
-pppoe-relay -B eth0 -B eth1
-.fi
-
-This example is a transparent relay -- frames are relayed between any mix
-of clients and servers on the eth0 and eth1 networks.
-
-.nf
-pppoe-relay -S eth0 -C eth1 -C eth2 -C eth3
-.fi
-
-This example relays frames between servers on the eth0 network and
-clients on the eth1, eth2 and eth3 networks.
-
-.SH AUTHORS
-\fBpppoe-relay\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-server.8 b/mdk-stage1/rp-pppoe/man/pppoe-server.8
deleted file mode 100644
index aacf11f1f..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-server.8
+++ /dev/null
@@ -1,123 +0,0 @@
-.\" $Id$ 
-.TH PPPOE-SERVER 8 "3 July 2000"
-.\""
-.UC 4
-.SH NAME
-pppoe-server \- user-space PPPoE server
-.SH SYNOPSIS
-.B pppoe-server \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-server\fR is a user-space server for PPPoE (Point-to-Point Protocol
-over Ethernet) for Linux and other UNIX systems.  \fBpppoe-server\fR works in
-concert with the \fBpppoe\fR client to respond to PPPoE discovery packets
-and set up PPPoE sessions.
-
-.SH OPTIONS
-.TP
-.B \-F
-The \fB\-F\fR option causes \fBpppoe-server\fR not to fork and become a
-daemon.  The default is to fork and become a daemon.
-
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use.  Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR.  The interface should be "up"
-before you start \fBpppoe-server\fR, but should \fInot\fR be configured to have
-an IP address.
-
-.TP
-.B \-T \fItimeout\fR
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details.
-
-.TP
-.B \-C \fIac_name\fR
-Specifies which name to report as the access concentrator name.  If not
-supplied, the host name is used.
-
-.TP
-.B \-m \fIMSS\fR
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details.
-
-.TP
-.B \-s
-This option is passed directly to \fBpppoe\fR; see \fBpppoe\fR(8) for
-details.  In addition, it causes \fBpppd\fR to be invoked with the
-\fIsync\fR option.
-
-.TP
-.B \-L \fIip\fR
-Sets the local IP address.  This is passed to spawned \fBpppd\fR processes.
-If not specified, the default is 10.0.0.1.
-
-.TP
-.B \-R \fIip\fR
-Sets the starting remote IP address.  As sessions are established,
-IP addresses are assigned starting from \fIip\fR.   \fBpppoe-server\fR
-automatically keeps track of the pool of addresses and passes a
-valid remote IP address to \fBpppd\fR.  If not specified, a starting address
-of 10.67.15.1 is used.
-
-.TP
-.B \-N \fInum\fR
-Allows at most \fInum\fR concurrent PPPoE sessions.  If not specified,
-the default is 64.
-
-.TP
-.B \-p \fIfname\fR
-Reads the specified file \fIfname\fR which is a text file consisting of
-one IP address per line.  These IP addresses will be assigned to clients.
-The number of sessions allowed will equal the number of addresses found
-in the file.  The \fB\-p\fR option overrides both \fB\-R\fR and \fB\-N\fR.
-
-.TP
-.B \-o \fIoffset\fR
-Instead of numbering PPPoE sessions starting at 1, they will be numbered
-starting at \fIoffset\fR+1.  This allows you to run multiple servers on
-a given machine; just make sure that their session numbers do not
-overlap.
-
-.TP
-.B \-f disc:sess
-The \fB\-f\fR option sets the Ethernet frame types for PPPoE discovery
-and session frames.  The types are specified as hexadecimal numbers
-separated by a colon.  Standard PPPoE uses frame types 8863:8864.
-\fIYou should not use this option\fR unless you are absolutely sure
-the peer you are dealing with uses non-standard frame types.
-
-.TP
-.B \-h
-The \fB\-h\fR option prints a brief usage message and exits.
-
-.SH OPERATION
-
-\fBpppoe-server\fR listens for incoming PPPoE discovery packets.  When
-a session is established, it spawns a \fBpppd\fR process.  The following
-options are passed to \fBpppd\fR:
-
-.nf
-nodetach noaccomp nobsdcom nodeflate nopcomp novj novjccomp
-default-asyncmap
-.fi
-
-In addition, the local and remote IP address are set based on the
-\fB\-L\fR and \fB\-R\fR options.  The \fBpty\fR option is supplied along
-with a \fBpppoe\fR command to initiate the PPPoE session.  Finally,
-additional \fBpppd\fR options can be placed in the file
-\fB/etc/ppp/pppoe-server-options\fR (which must exist, even if it is just
-empty!)
-
-Note that \fBpppoe-server\fR is meant mainly for testing PPPoE clients.
-It is \fInot\fR a high-performance server meant for production use.
-
-.SH AUTHORS
-\fBpppoe-server\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe-sniff.8 b/mdk-stage1/rp-pppoe/man/pppoe-sniff.8
deleted file mode 100644
index 431830a22..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe-sniff.8
+++ /dev/null
@@ -1,77 +0,0 @@
-.\" $Id$ 
-.TH PPPOE-SNIFF 8 "3 July 2000"
-.\""
-.UC 4
-.SH NAME
-pppoe-sniff \- examine network for non-standard PPPoE frames
-.SH SYNOPSIS
-.B pppoe-sniff \fR[\fIoptions\fR]
-
-.SH DESCRIPTION
-\fBpppoe-sniff\fR listens for likely-looking PPPoE PADR and session frames
-and deduces extra options required for \fBpppoe(8)\fR to work.
-
-Some DSL providers seem to use non-standard frame types for PPPoE frames,
-and/or require a certain value in the Service-Name field.  It is often
-easier to sniff those values from a machine which can successfully connect
-rather than try to pry them out of the DSL provider.
-
-To use \fBpppoe-sniff\fR, you need two computers, a DSL modem and
-an Ethernet hub (\fInot\fR an Ethernet switch.)
-
-If the DSL modem normally connects directly to your computer's
-Ethernet card, connect it to the "uplink" port on the Ethernet hub.
-Plug two computers into normal ports on the hub.  On one computer, run
-whatever software the DSL provider gave you on whatever operating
-system the DSL provider supports.  On the other computer, run Linux and
-log in as root.
-
-On the Linux machine, put the Ethernet interface into promiscuous mode
-and start \fBpppoe-sniff\fR.  If the ethernet interface is \fIeth0\fR,
-for example, type these commands:
-
-.nf
-	ifconfig eth0 promisc
-	pppoe-sniff -I eth0
-.fi
-
-On the other machine, start your DSL connection as usual.  After a short
-time, \fBpppoe-sniff\fR should print recommendations for the value
-of \fBPPPOE_EXTRA\fR.  Set this value in \fB/etc/ppp/pppoe.conf\fR.
-If \fBpppoe-sniff\fR indicates that something special is required in
-\fBPPPOE_EXTRA\fR, please e-mail this to \fBpppoe@roaringpenguin.com\fR
-along with the name of your ISP and the manufacturer and model number of
-your DSL modem.  This information will be collated and provided on the
-PPPoE web page for users who do not have two computers.
-
-After \fBpppoe-sniff\fR finishes (or you stop it if it seems hung),
-remember to turn off promiscuous mode:
-
-.nf
-	ifconfig eth0 -promisc
-.fi
-
-.SH OPTIONS
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use.  Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR.  The interface should be "up"
-and in promiscuous mode before you start \fBpppoe-sniff\fR.
-
-.TP
-.B \-V
-The \fB\-V\fR option causes \fBpppoe-sniff\fR to print its version number and
-exit.
-
-.SH BUGS
-\fBpppoe-sniff\fR only works on Linux.
-
-.SH AUTHORS
-\fBpppoe-sniff\fR was written by David F. Skoll <dfs@roaringpenguin.com>.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5),
-pppoe(8), adsl-setup(8), adsl-status(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe.8 b/mdk-stage1/rp-pppoe/man/pppoe.8
deleted file mode 100644
index 999c3d2ed..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe.8
+++ /dev/null
@@ -1,236 +0,0 @@
-.\" $Id$ 
-.TH PPPOE 8 "3 July 2000"
-.UC 4
-.SH NAME
-pppoe \- user-space PPPoE client.
-.SH SYNOPSIS
-.B pppd pty 'pppoe \fR[\fIpppoe_options\fR]\fB' \fR[\fIpppd_options\fR]
-.P
-.B pppoe -A \fR[\fIpppoe_options\fR]
-.SH DESCRIPTION
-\fBpppoe\fR is a user-space client for PPPoE (Point-to-Point Protocol
-over Ethernet) for Linux and other UNIX systems.  \fBpppoe\fR works in
-concert with the \fBpppd\fR PPP daemon to provide a PPP connection
-over Ethernet, as is used by many ADSL service providers.
-
-.SH OPTIONS
-.TP
-.B \-I \fIinterface\fR
-The \fB\-I\fR option specifies the Ethernet interface to use.  Under Linux,
-it is typically \fIeth0\fR or \fIeth1\fR.  The interface should be "up"
-before you start \fBpppoe\fR, but should \fInot\fR be configured to have
-an IP address.
-
-.TP
-.B \-T \fItimeout\fR
-The \fB\-T\fR option causes \fBpppoe\fR to exit if no session traffic
-is detected for \fItimeout\fR seconds.  I recommend that you use this
-option as an extra safety measure, but if you do, you should make sure
-that PPP generates enough traffic so the timeout will normally not be
-triggered.  The best way to do this is to use the
-\fIlcp-echo-interval\fR option to \fBpppd\fR.  You should set the
-PPPoE timeout to be about four times the LCP echo interval.
-
-.TP
-.B \-D \fIfile_name\fR
-The \fB\-D\fR option causes every packet to be dumped to the specified
-\fIfile_name\fR.  This is intended for debugging only; it produces huge
-amounts of output and greatly reduces performance.
-
-.TP
-.B \-V
-The \fB\-V\fR option causes \fBpppoe\fR to print its version number and
-exit.
-
-.TP
-.B \-A
-The \fB\-A\fR option causes \fBpppoe\fR to send a PADI packet and then print
-the names of access concentrators in each PADO packet it receives.  Do not
-use this option in conjunction with \fBpppd\fR; the \fB\-A\fR option is
-meant to be used interactively to give interesting information about the
-access concentrator.
-
-.TP
-.B \-S \fIservice_name\fR
-Specifies the desired service name.  \fBpppoe\fR will only initiate sessions
-with access concentrators which can provide the specified service.  In
-most cases, you should \fInot\fR specify this option.  Use it only if you
-know that there are multiple access concentrators or know that you need a
-specific service name.
-
-.TP
-.B \-C \fIac_name\fR
-Specifies the desired access concentrator name.  \fBpppoe\fR will only
-initiate sessions with the specified access concentrator.  In
-most cases, you should \fInot\fR specify this option.  Use it only if you
-know that there are multiple access concentrators.  If both the
-\fB\-S\fR and \fB\-C\fR options are specified, they must \fIboth\fR match
-for \fBpppoe\fR to initiate a session.
-
-.TP
-.B \-U
-Causes \fBpppoe\fR to use the Host-Uniq tag in its discovery packets.  This
-lets you run multiple \fBpppoe\fR daemons without having their discovery
-packets interfere with one another.  You must supply this option to
-\fIall\fR \fBpppoe\fR daemons if you intend to run multiple daemons
-simultaneously.
-
-.TP
-.B \-s
-Causes \fBpppoe\fR to use \fIsynchronous\fR PPP encapsulation.  If you
-use this option, then you \fImust\fR use the \fBsync\fR option with
-\fBpppd\fR.  You are encouraged to use this option if it works, because
-it greatly reduces the CPU overhead of \fBpppoe\fR.  However, it
-MAY be unreliable on slow machines -- there is a race condition between
-pppd writing data and pppoe reading it.  For this reason, the default
-setting is asynchronous.  If you encounter bugs or crashes with Synchronous
-PPP, turn it off -- don't e-mail me for support!
-
-.TP
-.B \-m \fIMSS\fR
-Causes \fBpppoe\fR to \fIclamp\fR the TCP maximum segment size at the specified
-value.  Because of PPPoE overhead, the maximum segment size for PPPoE is
-smaller than for normal Ethernet encapsulation.  This could cause problems
-for machines on a LAN behind a gateway using PPPoE.  If you have a LAN
-behind a gateway, and the gateway connects to the Internet using PPPoE,
-you are strongly recommended to use a \fB\-m 1412\fR option.  This avoids
-having to set the MTU on all the hosts on the LAN.
-
-.TP
-.B \-p \fIfile\fR
-Causes \fBpppoe\fR to write its process-ID to the specified file.  This
-can be used to locate and kill \fBpppoe\fR processes.
-
-.TP
-.B \-e \fIsess:mac\fR
-Causes \fBpppoe\fR to skip the discovery phase and move directly to the
-session phase.  The session is given by \fIsess\fR and the MAC address of
-the peer by \fImac\fR.  This mode is \fInot\fR meant for normal use; it
-is designed only for \fBpppoe-server\fR(8).
-
-.TP
-.B \-n
-Causes \fBpppoe\fR not to open a discovery socket.  This mode is
-\fInot\fR meant for normal use; it is designed only for
-\fBpppoe-server\fR(8).
-
-.TP
-.B \-k
-Causes \fBpppoe\fR to terminate an existing session by sending a PADT frame,
-and then exit.  You must use the \fB\-e\fR option in conjunction with this
-option to specify the session to kill.  This may be useful for killing
-sessions when a buggy peer does not realize the session has ended.
-
-.TP
-.B \-d
-Causes \fBpppoe\fR to perform discovery and then exit, after printing
-session information to standard output.  The session information is printed
-in exactly the format expected by the \fB\-e\fR option.  This option lets
-you initiate a PPPoE discovery, perform some other work, and then start
-the actual PPP session.  \fIBe careful\fR; if you use this option in a loop,
-you can create many sessions, which may annoy your peer.
-
-.TP
-.B \-f disc:sess
-The \fB\-f\fR option sets the Ethernet frame types for PPPoE discovery
-and session frames.  The types are specified as hexadecimal numbers
-separated by a colon.  Standard PPPoE uses frame types 8863:8864.
-\fIYou should not use this option\fR unless you are absolutely sure
-the peer you are dealing with uses non-standard frame types.  If your
-ISP uses non-standard frame types, complain!
-
-.TP
-.B \-h
-The \fB\-h\fR option causes \fBpppoe\fR to print usage information and
-exit.
-
-.SH PPPOE BACKGROUND
-
-PPPoE (Point-to-Point Protocol over Ethernet) is described in RFC 2516
-and is a protocol which allows the session abstraction to be maintained
-over bridged Ethernet networks.
-
-PPPoE works by encapsulating PPP frames in Ethernet frames.  The protocol
-has two distinct stages:  The \fIdiscovery\fR and the \fIsession\fR stage.
-
-In the discovery stage, the host broadcasts a special PADI (PPPoE
-Active Discovery Initiation) frame to discover any \fIaccess
-concentrators\fR.  The access concentrators (typically, only one
-access concentrator) reply with PADO (PPPoE Active Discovery Offer)
-packets, announcing their presence and the services they offer.  The
-host picks one of the access concentrators and transmits a PADR (PPPoE
-Active Discovery Request) packet, asking for a session.  The access
-concentrator replies with a PADS (PPPoE Active Discovery
-Session-Confirmation) packet.  The protocol then moves to the session stage.
-
-In the session stage, the host and access concentrator exchange PPP frames
-embedded in Ethernet frames.  The normal Ethernet MTU is 1500 bytes, but
-the PPPoE overhead plus two bytes of overhead for the encapsulated PPP
-frame mean that the MTU of the PPP interface is at most 1492 bytes.
-This causes \fIall kinds of problems\fR if you are using a Linux machine
-as a firewall and interfaces behind the firewall have an MTU greater than
-1492.  In fact, to be safe, I recommend setting the MTU of machines
-behind the firewall to 1412, to allow for worst-case TCP and IP options
-in their respective headers.
-
-Normally, PPP uses the Link Control Protocol (LCP) to shut down a PPP
-link.  However, the PPPoE specification allows the link to be shut down
-with a special PADT (PPPoE Active Discovery Terminate) packet.  This client
-recognizes this packet and will correctly terminate if a terminate request
-is received for the PPP session.
-
-.SH DESIGN GOALS
-
-My design goals for this PPPoE client were as follows, in descending order
-of importance:
-
-.TP
-.B o
-It must work.
-
-.TP
-.B o
-It must be a user-space program and not a kernel patch.
-
-.TP
-.B o
-The code must be easy to read and maintain.
-
-.TP
-.B o
-It must be fully compliant with RFC 2516, the proposed PPPoE standard.
-
-.TP
-.B o
-It must never hang up forever -- if the connection is broken, it must
-detect this and exit, allowing a wrapper script to restart the connection.
-
-.TP
-.B o
-It must be fairly efficient.
-
-.P
-I believe I have achieved all of these goals, but (of course) am open
-to suggestions, patches and ideas.  See my home page,
-http://www.roaringpenguin.com, for contact information.
-
-.SH NOTES
-
-For best results, you must give \fBpppd\fR an mtu option of
-1492.  I have observed problems with excessively-large frames
-unless I set this option.  Also, if \fBpppoe\fR is running on a firewall
-machine, all machines behind the firewall should have MTU's of 1412.
-
-If you have problems, check your system logs.  \fBpppoe\fR logs interesting
-things to syslog.  You may have to turn on logging of \fIdebug\fR-level
-messages for complete diagnosis.
-
-.SH AUTHORS
-\fBpppoe\fR was written by David F. Skoll <dfs@roaringpenguin.com>,
-with much inspiration from an earlier version by Luke Stras.
-
-The \fBpppoe\fR home page is \fIhttp://www.roaringpenguin.com/pppoe/\fR.
-
-.SH SEE ALSO
-adsl-start(8), adsl-stop(8), adsl-connect(8), pppd(8), pppoe.conf(5), adsl-setup(8), adsl-status(8), pppoe-sniff(8), pppoe-server(8), pppoe-relay(8)
-
diff --git a/mdk-stage1/rp-pppoe/man/pppoe.conf.5 b/mdk-stage1/rp-pppoe/man/pppoe.conf.5
deleted file mode 100644
index 731fd98d4..000000000
--- a/mdk-stage1/rp-pppoe/man/pppoe.conf.5
+++ /dev/null
@@ -1,168 +0,0 @@
-.\" $Id$
-.\""
-.TH PPPOE.CONF 5 "21 February 2000"
-.UC 4
-.SH NAME
-pppoe.conf \- Configuration file used by \fBadsl-start\fR(8),
-\fBadsl-stop\fR(8), \fBadsl-status(8)\fR and \fBadsl-connect\fR(8).
-
-.SH DESCRIPTION
-\fB/etc/ppp/pppoe.conf\fR is a shell script which contains configuration
-information for Roaring Penguin's ADSL scripts.  Note that \fBpppoe.conf\fR
-is used only by the various adsl-* shell scripts, not by \fBpppoe\fR
-itself.
-
-\fBpppoe.conf\fR consists of a sequence of shell variable assignments.
-The variables and their meanings are:
-
-.TP
-.B ETH
-The Ethernet interface connected to the ADSL modem (for example, eth0).
-
-.TP
-.B USER
-The ADSL user-id (for example, b1xxnxnx@sympatico.ca).
-
-.TP
-.B SERVICENAME
-If this is not blank, then it is passed with the \fB\-S\fR option to
-\fBpppoe\fR.  It specifies a service name to ask for.  Usually, you
-should leave it blank.
-
-.TP
-.B ACNAME
-If this is not blank, then it is passed with the \fB\-C\fR option to
-\fBpppoe\fR.  It specifies the name of the access concentrator to connect
-to.  Usually, you should leave it blank.
-
-.TP
-.B DEMAND
-If set to a number, the link is activated on demand and brought down
-after after \fBDEMAND\fR seconds.  If set to \fBno\fR, the link is kept
-up all the time rather than being activated on demand.
-
-.TP
-.B DNSTYPE
-One of \fBNOCHANGE\fR, \fBSPECIFY\fR or \fBSERVER\fR.  If
-set to NOCHANGE, \fBadsl-connect\fR will not adjust the DNS setup in
-any way.  If set to SPECIFY, it will re-write /etc/resolv.conf with
-the values of DNS1 and DNS2.  If set to \fBSERVER\fR, it will
-supply the \fIusepeerdns\fR option to \fBpppd\fR, and make a symlink
-from /etc/resolv.conf to /etc/ppp/resolv.conf.
-
-.TP
-.B DNS1, DNS2
-IP addresses of DNS servers if you use DNSTYPE=SPECIFY.
-
-.TP
-.B NONROOT
-If the line \fBNONROOT=OK\fR (exactly like that; no whitespace or comments)
-appears in the configuration file, then \fBpppoe-wrapper\fR will allow
-non-root users to bring the conneciton up or down.  The wrapper is installed
-only if you installed the rp-pppoe-gui package.
-
-.TP
-.B USEPEERDNS
-If set to "yes", then \fBadsl-connect\fR will supply the \fIusepeerdns\fR
-option to \fBpppd\fR, which causes it to obtain DNS server addresses
-from the peer and create a new \fB/etc/resolv.conf\fR file.  Otherwise,
-\fBadsl-connect\fR will not supply this option, and \fBpppd\fR will not
-modify \fB/etc/resolv.conf\fR.
-
-.TP
-.B CONNECT_POLL
-How often (in seconds) \fBadsl-start\fR should check to see if a new PPP
-interface has come up.  If this is set to 0, the \fBadsl-start\fR simply
-initiates the PPP session, but does not wait to see if it comes up
-successfully.
-
-.TP
-.B CONNECT_TIMEOUT
-How long (in seconds) \fBadsl-start\fR should wait for a new PPP interface
-to come up before concluding that \fBadsl-connect\fR has failed and killing
-the session.
-
-.TP
-.B PING
-A character which is echoed every \fBCONNECT_POLL\fR seconds while
-\fBadsl-start\fR is waiting for the PPP interface to come up.
-
-.TP
-.B FORCEPING
-A character which is echoed every \fBCONNECT_POLL\fR seconds while
-\fBadsl-start\fR is waiting for the PPP interface to come up.  Similar
-to \fBPING\fR, but the character is echoed even if \fBadsl-start\fR's
-standard output is not a tty.
-
-.TP
-.B PIDFILE
-A file in which to write the process-ID of the adsl-connect process
-(for example, \fB/var/run/pppoe.pid\fR).  Two additional files
-($PIDFILE.pppd and $PIDFILE.pppoe) hold the process-ID's of the
-\fBpppd\fR and \fBpppoe\fR processes, respectively.
-
-.TP
-.B SYNCHRONOUS
-An indication of whether or not to use synchronous PPP (\fByes\fR or
-\fBno\fR).  Synchronous PPP is safe on Linux machines with the n_hdlc
-line discipline.  (If you have a file called "n_hdlc.o" in your
-modules directory, you have the line discipline.)  It is \fInot
-recommended\fR on other machines or on Linux machines without the
-n_hdlc line discipline due to some known and unsolveable race
-conditions in a user-mode client.
-
-.TP
-.B CLAMPMSS
-The value at which to "clamp" the advertised MSS for TCP sessions.  The
-default of 1412 should be fine.
-
-.TP
-.B LCP_INTERVAL
-How often (in seconds) \fBpppd\fR sends out LCP echo-request packets.
-
-.TP
-.B LCP_FAILURE
-How many unanswered LCP echo-requests must occur before \fBpppd\fR
-concludes the link is dead.
-
-.TP
-.B PPPOE_TIMEOUT
-If this many seconds elapse without any activity seen by \fBpppoe\fR,
-then \fBpppoe\fR exits.
-
-.TP
-.B FIREWALL
-One of NONE, STANDALONE or MASQUERADE.  If NONE, then \fBadsl-connect\fR does
-not add any firewall rules.  If STANDALONE, then it clears existing firewall
-rules and sets up basic rules for a standalone machine.  If MASQUERADE, then
-it clears existing firewall rules and sets up basic rules for an Internet
-gateway.  If you run services on your machine, these simple firewall scripts
-are inadequate; you'll have to make your own firewall rules and set FIREWALL
-to NONE.
-
-.TP
-.B PPPOE_EXTRA
-Any extra arguments to pass to \fBpppoe\fR
-
-.TP
-.B PPPD_EXTRA
-Any extra arguments to pass to \fBpppd\fR
-
-.TP
-.B LINUX_PLUGIN
-If non-blank, the full path of the Linux kernel-mode PPPoE plugin
-(typically \fB/etc/ppp/plugins/rp-pppoe.so\fR.)  This forces
-\fBadsl-connect\fR to use kernel-mode PPPoE on Linux 2.4.x systems.
-This code is experimental and unsupported.  Use of the plugin causes
-\fBadsl-connect\fR to ignore CLAMPMSS, PPPOE_EXTRA, SYNCHRONOUS and
-PPPOE_TIMEOUT.
-
-.P
-By using different configuration files with different PIDFILE
-settings, you can manage multiple PPPoE connections.  Just specify the
-configuration file as an argument to \fBadsl-start\fR and \fBadsl-stop\fR.
-
-.SH SEE ALSO
-pppoe(8), adsl-connect(8), adsl-start(8), adsl-stop(8), pppd(8), adsl-setup(8),
-pppoe-wrapper(8)
-
diff --git a/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec b/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec
deleted file mode 100644
index 3222a602e..000000000
--- a/mdk-stage1/rp-pppoe/rp-pppoe-gui.spec
+++ /dev/null
@@ -1,98 +0,0 @@
-Summary: PPP Over Ethernet (xDSL support)
-Name: rp-pppoe-gui
-Version: 3.0
-%if %(%{expand:test %{_vendor} != mandrake ; echo $?})
-Release: 1mdk
-%else
-Release: 1
-%endif
-Copyright: GPL
-Group: System Environment/Daemons
-Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-3.0.tar.gz
-Url: http://www.roaringpenguin.com/pppoe/
-Packager: David F. Skoll <dfs@roaringpenguin.com>
-BuildRoot: /tmp/pppoe-build
-Vendor: Roaring Penguin Software Inc.
-Requires: ppp >= 2.3.7
-Requires: rp-pppoe >= 3.0
-
-%description
-This is a graphical wrapper around the rp-pppoe PPPoE client.  PPPoE is
-a protocol used by many DSL Internet Service Providers.
-
-%prep
-umask 022
-mkdir -p $RPM_BUILD_ROOT
-cd $RPM_BUILD_ROOT
-rm -rf $RPM_BUILD_ROOT/rp-pppoe-%{version}
-zcat $RPM_SOURCE_DIR/rp-pppoe-%{version}.tar.gz | tar xvf -
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/src
-./configure --mandir=%{_mandir}
-
-%build
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/gui
-make
-
-%install
-cd $RPM_BUILD_ROOT/rp-pppoe-%{version}/gui
-make install RPM_INSTALL_ROOT=$RPM_BUILD_ROOT
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-# Install entry in KDE menu
-if test -n "$KDEDIR" ; then
-    mkdir -p "$KDEDIR/share/applnk/Internet"
-    cat <<EOF > "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-# KDE Config File
-[KDE Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-# Install entry in GNOME menus
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
-    mkdir -p "$GNOMEDIR/gnome/apps/Internet"
-cat <<EOF > "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-[Desktop Entry]
-Name=TkPPPoE
-Comment=Start/Stop ADSL connections
-Exec=tkpppoe
-Terminal=0
-Type=Application
-EOF
-fi
-
-%postun
-# Remove KDE menu entry
-if test -n "$KDEDIR" ; then
-    rm -f "$KDEDIR/share/applnk/Internet/tkpppoe.kdelnk"
-fi
-
-# Remove GNOME menu entry
-GNOMEDIR=`gnome-config --datadir 2>/dev/null`
-if test -n "$GNOMEDIR" ; then
-    rm -f "$GNOMEDIR/gnome/apps/Internet/tkpppoe.desktop"
-fi
-
-%files
-%defattr(-,root,root)
-%dir /etc/ppp/rp-pppoe-gui
-/usr/sbin/pppoe-wrapper
-/usr/bin/tkpppoe
-%{_mandir}/man1/tkpppoe.1*
-%{_mandir}/man1/pppoe-wrapper.1*
-/usr/share/rp-pppoe-gui/tkpppoe.html
-/usr/share/rp-pppoe-gui/mainwin-busy.png
-/usr/share/rp-pppoe-gui/mainwin-nonroot.png
-/usr/share/rp-pppoe-gui/mainwin.png
-/usr/share/rp-pppoe-gui/props-advanced.png
-/usr/share/rp-pppoe-gui/props-basic.png
-/usr/share/rp-pppoe-gui/props-nic.png
-/usr/share/rp-pppoe-gui/props-options.png
diff --git a/mdk-stage1/rp-pppoe/rp-pppoe.spec b/mdk-stage1/rp-pppoe/rp-pppoe.spec
deleted file mode 100644
index 622e3bb80..000000000
--- a/mdk-stage1/rp-pppoe/rp-pppoe.spec
+++ /dev/null
@@ -1,71 +0,0 @@
-Summary: PPP Over Ethernet (xDSL support)
-Name: rp-pppoe
-Version: 3.0
-%if %(%{expand:test %{_vendor} != mandrake ; echo $?})
-Release: 1mdk
-%else
-Release: 1
-%endif
-Copyright: GPL
-Group: System Environment/Daemons
-Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-3.0.tar.gz
-Url: http://www.roaringpenguin.com/pppoe/
-Packager: David F. Skoll <dfs@roaringpenguin.com>
-BuildRoot: /tmp/pppoe-build
-Vendor: Roaring Penguin Software Inc.
-Requires: ppp >= 2.3.7
-
-%description
-PPPoE (Point-to-Point Protocol over Ethernet) is a protocol used by
-many ADSL Internet Service Providers. Roaring Penguin has a free
-client for Linux systems to connect to PPPoE service providers.
-
-The client is a user-mode program and does not require any kernel
-modifications. It is fully compliant with RFC 2516, the official PPPoE
-specification.
-
-%prep
-%setup
-cd src
-./configure --mandir=%{_mandir}
-
-%build
-cd src
-make
-
-%install
-cd src
-make install RPM_INSTALL_ROOT=$RPM_BUILD_ROOT
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-,root,root)
-%doc doc/CHANGES doc/HOW-TO-CONNECT doc/LICENSE doc/KERNEL-MODE-PPPOE README
-%config /etc/ppp/pppoe.conf
-%config /etc/ppp/pppoe-server-options
-%config /etc/ppp/firewall-masq
-%config /etc/ppp/firewall-standalone
-/etc/ppp/plugins/*
-/usr/sbin/pppoe
-/usr/sbin/pppoe-server
-/usr/sbin/pppoe-sniff
-/usr/sbin/pppoe-relay
-/usr/sbin/adsl-connect
-/usr/sbin/adsl-start
-/usr/sbin/adsl-stop
-/usr/sbin/adsl-setup
-/usr/sbin/adsl-status
-%{_mandir}/man5/pppoe.conf.5*
-%{_mandir}/man8/pppoe.8*
-%{_mandir}/man8/pppoe-server.8*
-%{_mandir}/man8/pppoe-relay.8*
-%{_mandir}/man8/pppoe-sniff.8*
-%{_mandir}/man8/adsl-connect.8*
-%{_mandir}/man8/adsl-start.8*
-%{_mandir}/man8/adsl-stop.8*
-%{_mandir}/man8/adsl-status.8*
-%{_mandir}/man8/adsl-setup.8*
-/etc/rc.d/init.d/adsl
-
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-connect.in b/mdk-stage1/rp-pppoe/scripts/adsl-connect.in
deleted file mode 100755
index 85dfb3d8d..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-connect.in
+++ /dev/null
@@ -1,278 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-connect
-#
-# Shell script to connect to an ADSL provider using PPPoE
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-connect [config_file]
-#        adsl-connect interface user [config_file]
-# Second form overrides USER and ETH from config file.
-# If config_file is omitted, defaults to /etc//ppp/pppoe.conf
-#
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-localstatedir=/var
-
-# Paths to programs
-IFCONFIG=/sbin/ifconfig
-PPPD=@PPPD@
-SETSID=@SETSID@
-PPPOE=@sbindir@/pppoe
-LOGGER="/usr/bin/logger -t `basename $0`"
-
-# Must be root
-if test "`@ID@ -u`" != 0 ; then
-    echo "$0: You must be root to run this script" >& 2
-    exit 1
-fi
-
-if test "$SETSID" != "" -a ! -x "$SETSID"; then
-    SETSID=""
-fi
-
-CONFIG=/etc//ppp/pppoe.conf
-USER=""
-ETH=""
-
-# Sort out command-line arguments
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-    3)
-	CONFIG="$3"
-	;;
-esac
-
-if test ! -f "$CONFIG" -o ! -r "$CONFIG" ; then
-    echo "$0: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-
-# Check for command-line overriding of ETH and USER
-case "$#" in
-    2|3)
-	ETH="$1"
-	USER="$2"
-	;;
-esac
-
-# Check that config file is sane
-if test "$USER" = "" ; then
-    echo "$0: Check '$CONFIG' -- no setting for USER" >& 2
-    exit 1
-fi
-if test "$ETH" = "" ; then
-    echo "$0: Check '$CONFIG' -- no setting for ETH" >& 2
-    exit 1
-fi
-
-PPPD_PID=0
-
-# Catch common error
-if test "$DEBUG" = "1" ; then
-    echo "*** If you want to use DEBUG, invoke adsl-start, not adsl-connect."
-    exit 1
-fi
-
-if test "$DEBUG" != "" ; then
-    if test "$LINUX_PLUGIN" != "" ; then
-	echo "Cannot use DEBUG mode and LINUX_PLUGIN at the same time."
-	echo "Kernel-mode PPPoE is experimental and unsupported."
-	exit 1
-    fi
-    echo "* The following section identifies your Ethernet interface" >> $DEBUG
-    echo "* and user name.  Some ISP's need 'username'; others" >> $DEBUG
-    echo "* need 'username@isp.com'.  Try both" >> $DEBUG
-    echo "ETH=$ETH; USER=$USER" >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-fi
-
-# MTU of Ethernet card attached to modem MUST be 1500.  This apparently
-# fails on some *BSD's, so we'll only do it under Linux
-
-if test `uname -s` = Linux ; then
-    $IFCONFIG $ETH up mtu 1500
-    # For 2.4 kernels.  Will fail on 2.2.x, but who cares?
-    modprobe ppp_generic > /dev/null 2>&1
-    modprobe ppp_async > /dev/null 2>&1
-    modprobe ppp_synctty > /dev/null 2>&1
-    if test -n "$LINUX_PLUGIN" ; then
-	modprobe pppox > /dev/null 2>&1
-	modprobe pppoe > /dev/null 2>&1
-    fi
-fi
-
-if test "$SYNCHRONOUS" = "yes" ; then
-	PPPOE_SYNC=-s
-	PPPD_SYNC=sync
-	# Increase the chances of it working on Linux...
-	if test `uname -s` = Linux ; then
-	    modprobe n_hdlc > /dev/null 2>&1
-	fi
-else
-	PPPOE_SYNC=""
-	PPPD_SYNC=""
-fi
-
-if test -n "$ACNAME" ; then
-    ACNAME="-C $ACNAME"
-fi
-
-if test -n "$SERVICENAME" ; then
-    SERVICENAME="-S $SERVICENAME"
-fi
-
-if test "$CLAMPMSS" = "no" ; then
-	CLAMPMSS=""
-else
-	CLAMPMSS="-m $CLAMPMSS"
-fi
-
-# If DNSTYPE is SERVER, we must use "usepeerdns" option to pppd.
-if test "$DNSTYPE" = "SERVER" ; then
-	USEPEERDNS=yes
-fi
-
-if test "$USEPEERDNS" = "yes" ; then
-	USEPEERDNS="usepeerdns"
-else
-	USEPEERDNS=""
-fi
-
-# Backward config file compatibility
-if test "$DEMAND" = "" ; then
-	DEMAND=no
-fi
-
-if test "$DEMAND" = "no" ; then
-	DEMAND=""
-else
-	DEMAND="demand persist idle $DEMAND 10.112.112.112:10.112.112.113 ipcp-accept-remote ipcp-accept-local connect true noipdefault ktune"
-fi
-
-case "$FIREWALL" in
-    STANDALONE)
-	. /etc/ppp/firewall-standalone
-	;;
-    MASQUERADE)
-	. /etc/ppp/firewall-masq
-	;;
-esac
-
-# If we're using kernel-mode PPPoE on Linux...
-if test "$LINUX_PLUGIN" != "" ; then
-    PLUGIN_OPTS="plugin $LINUX_PLUGIN $ETH"
-    modprobe pppoe > /dev/null 2>&1
-fi
-
-# Standard PPP options we always use
-PPP_STD_OPTIONS="$PLUGIN_OPTS noipdefault noauth default-asyncmap defaultroute hide-password nodetach $USEPEERDNS local mtu 1492 mru 1492 noaccomp noccp nobsdcomp nodeflate nopcomp novj novjccomp user $USER lcp-echo-interval $LCP_INTERVAL lcp-echo-failure $LCP_FAILURE $PPPD_EXTRA"
-
-# Jigger DNS if required...
-if test "$DNSTYPE" = "SERVER" ; then
-    # Sorry, dude...
-    rm -f /etc/resolv.conf
-    ln -s /etc/ppp/resolv.conf /etc/resolv.conf
-elif test "$DNSTYPE" = "SPECIFY" ; then
-    # Sorry, dude...
-    rm -f /etc/resolv.conf
-    echo "nameserver $DNS1" > /etc/resolv.conf
-    if test -n "$DNS2" ; then
-	echo "nameserver $DNS2" >> /etc/resolv.conf
-    fi
-fi
-
-# PPPoE invocation
-PPPOE_CMD="$PPPOE -p $PPPOE_PIDFILE -I $ETH -T $PPPOE_TIMEOUT -U $PPPOE_SYNC $CLAMPMSS $ACNAME $SERVICENAME $PPPOE_EXTRA"
-if test "$DEBUG" != "" ; then
-    if test "$DEMAND" != "" ; then
-	echo "(Turning off DEMAND for debugging purposes)"
-	DEMAND=""
-    fi
-    echo "* The following section shows the pppd command we will invoke" >> $DEBUG
-    echo "pppd invocation" >> $DEBUG
-    echo "$SETSID $PPPD pty '$PPPOE_CMD' $PPP_STD_OPTIONS $PPPD_SYNC debug" >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-    $SETSID $PPPD pty "$PPPOE_CMD -D $DEBUG-0" \
-	$PPP_STD_OPTIONS \
-	$PPPD_SYNC \
-	debug >> $DEBUG 2>&1
-    echo "---------------------------------------------" >> $DEBUG
-    echo "* The following section is an extract from your log." >> $DEBUG
-    echo "* Look for error messages from pppd, such as" >> $DEBUG
-    echo "* a lack of kernel support for PPP, authentication failure" >> $DEBUG
-    echo "* etc." >> $DEBUG
-    echo "Extract from /var/log/messages" >> $DEBUG
-    grep 'ppp' /var/log/messages | tail -150 >> $DEBUG
-    date >> $DEBUG
-    echo "---------------------------------------------" >> $DEBUG
-    echo "* The following section is a dump of the packets" >> $DEBUG
-    echo "* sent and received by rp-pppoe.  If you don't see" >> $DEBUG
-    echo "* any output, it's an Ethernet driver problem.  If you only" >> $DEBUG
-    echo "* see three PADI packets and nothing else, check your cables" >> $DEBUG
-    echo "* and modem.  Make sure the modem lights flash when you try" >> $DEBUG
-    echo "* to connect.  Check that your Ethernet card is in" >> $DEBUG
-    echo "* half-duplex, 10Mb/s mode.  If all else fails," >> $DEBUG
-    echo "* try using pppoe-sniff." >> $DEBUG
-    echo "rp-pppoe debugging dump" >> $DEBUG
-    cat $DEBUG-0 >> $DEBUG
-    rm -f $DEBUG-0
-    for i in 1 2 3 4 5 6 7 8 9 10 ; do
-    echo ""
-    echo ""
-    echo ""
-    done
-    echo "*** Finished debugging run.  Please review the file"
-    echo "*** '$DEBUG' and try to"
-    echo "*** figure out what is going on."
-    echo "***"
-    echo "*** Unfortunately, we can NO LONGER accept debugging"
-    echo "*** output for analysis.  Please do not send this to"
-    echo "*** Roaring Penguin; it is too time-consuming for"
-    echo "*** us to deal with all the analyses we have been sent."
-    exit 0
-fi
-
-echo $$ > $PIDFILE
-
-while [ true ] ; do
-    if test "$LINUX_PLUGIN" != "" ; then
-	$SETSID $PPPD $PPP_STD_OPTIONS $DEMAND &
-	echo "$!" > $PPPD_PIDFILE
-    else
-	$SETSID $PPPD pty "$PPPOE_CMD" \
-	    $PPP_STD_OPTIONS \
-	    $DEMAND \
-	    $PPPD_SYNC &
-	echo "$!" > $PPPD_PIDFILE
-    fi
-    wait
-
-    # Run /etc/ppp/adsl-lost if it exists
-    test -x /etc/ppp/adsl-lost && /etc/ppp/adsl-lost
-
-    # Re-establish the connection
-    $LOGGER -p daemon.notice \
-        "ADSL connection lost; attempting re-connection."
-
-    # Wait a bit in case a problem causes tons of log messages :-)
-    sleep 5
-done
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in b/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
deleted file mode 100755
index 936f5fba7..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-# Modifed to work with SuSE 6.4 linux by Gary Cameron.
-#
-# Source function library.
-#. /etc/rc.d/init.d/functions  # For red hat?
-. /etc/rc.config               # For SuSE, enables setting from /etc/rc.config
-
-#Tweak this
-restart_time=120
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-
-test "$ADSL_START" = "yes" || exit 0
-
-# The echo return value for success (defined in /etc/rc.config).
-return=$rc_done
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link"
-        $START  > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link"
-        $STOP > /dev/null 2>&1 || return=$rc_failed
-        echo -e "$return"
-        ;;
-
-    restart)
-        $0 stop
-        echo "Waiting" $restart_time "seconds for the host to reset itself"
-        sleep $restart_time  #Note: Need time for host to reset itself
-        $0 start
-        ;;
-
-    status)
-        $STATUS
-        ;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in b/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
deleted file mode 100755
index 3b22f1345..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Source function library if it exists
-test -r /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link: "
-
-	$START
-	if [ $? = 0 ] ; then
-		echo success
-		touch /var/lock/subsys/adsl
-	else
-		echo failure
-	fi
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link: "
-
-	$STOP > /dev/null 2>&1
-	if [ $? = 0 ] ; then
-		echo success
-		rm -f /var/lock/subsys/adsl
-	else
-		echo failure
-	fi
-        ;;
-
-    restart)
-	$0 stop
-	$0 start
-	;;
-
-    status)
-	$STATUS
-	;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-init.in b/mdk-stage1/rp-pppoe/scripts/adsl-init.in
deleted file mode 100755
index ab9146fd3..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-init.in
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-#
-# adsl                     This script starts or stops an ADSL connection
-#
-# chkconfig: 2345 99 01
-# description: Connects to ADSL provider
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.  This software may
-# be distributed under the terms of the GNU General Public License, version
-# 2 or any later version.
-
-# Source function library if it exists
-test -r /etc/rc.d/init.d/functions && . /etc/rc.d/init.d/functions
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-START=@sbindir@/adsl-start
-STOP=@sbindir@/adsl-stop
-STATUS=@sbindir@/adsl-status
-case "$1" in
-    start)
-        echo -n "Bringing up ADSL link"
-
-	$START
-	if [ $? = 0 ] ; then
-		touch /var/lock/subsys/adsl
-	        echo_success
-	else
-		echo_failure
-	fi
-        echo ""
-        ;;
-
-    stop)
-        echo -n "Shutting down ADSL link"
-
-	$STOP > /dev/null 2>&1
-	if [ $? = 0 ] ; then
-		rm -f /var/lock/subsys/adsl
-	        echo_success
-	else
-		echo_failure
-	fi
-        echo ""
-        ;;
-
-    restart)
-	$0 stop
-	$0 start
-	;;
-
-    status)
-	$STATUS
-	;;
-
-    *)
-        echo "Usage: adsl {start|stop|restart|status}"
-        exit 1
-esac
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-setup.in b/mdk-stage1/rp-pppoe/scripts/adsl-setup.in
deleted file mode 100755
index a8c7fa039..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-setup.in
+++ /dev/null
@@ -1,346 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# adsl-setup
-#
-# All-purpose slicing/dicing shell script to configure rp-pppoe.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-IFCONFIG=/sbin/ifconfig
-PPPD=@PPPD@
-PPPOE=@sbindir@/pppoe
-ECHO=@ECHO@
-LOGGER="/usr/bin/logger -t `basename $0`"
-
-CONFIG=/etc/ppp/pppoe.conf
-
-# Protect created files
-umask 077
-
-copy() {
-    cp $1 $2
-    if [ "$?" != 0 ] ; then
-	$ECHO "*** Error copying $1 to $2"
-	$ECHO "*** Quitting."
-	exit 1
-    fi
-}
-
-$ECHO "Welcome to the Roaring Penguin ADSL client setup.  First, I will run"
-$ECHO "some checks on your system to make sure the PPPoE client is installed"
-$ECHO "properly..."
-$ECHO ""
-
-# Must be root
-if [ "`@ID@ -u`" != 0 ] ; then
-    $ECHO "$0: Sorry, you must be root to run this script"
-    exit 1
-fi
-
-# Prototype config file must exist
-if [ ! -r "$CONFIG" ] ; then
-    $ECHO "Oh, dear, I don't see the file '$CONFIG' anywhere.  Please"
-    $ECHO "re-install the PPPoE client."
-    exit 1
-fi
-
-# Must have pppd
-if [ ! -x $PPPD ] ; then
-    $ECHO "Oops, I can't execute the program '$PPPD'.  You"
-    $ECHO "must install the PPP software suite, version 2.3.10 or later."
-    exit 1
-fi
-
-. $CONFIG
-
-if [ "$DEMAND" = "" ] ; then
-    DEMAND=no
-fi
-
-# pppoe must exist
-if [ ! -x "$PPPOE" ] ; then
-    $ECHO "Oh, dear, I can't execute the program '$PPPOE'.  Please"
-    $ECHO "re-install the rp-pppoe client."
-    exit 1
-fi
-
-$ECHO "Looks good!  Now, please enter some information:"
-
-while [ true ] ; do
-    $ECHO ""
-    $ECHO "USER NAME"
-    $ECHO ""
-    $ECHO -n ">>> Enter your PPPoE user name (default $USER): "
-    read U
-
-    if [ "$U" = "" ] ; then
-	U="$USER"
-    fi
-
-    # Under Linux, "fix" the default interface if eth1 is not available
-    if test `uname -s` = "Linux" ; then
-	$IFCONFIG $ETH > /dev/null 2>&1 || ETH=eth0
-    fi
-    $ECHO ""
-    $ECHO "INTERFACE"
-    $ECHO ""
-    $ECHO ">>> Enter the Ethernet interface connected to the ADSL modem"
-    $ECHO "For Solaris, this is likely to be something like /dev/hme0."
-    $ECHO "For Linux, it will be ethn, where 'n' is a number."
-    $ECHO -n "(default $ETH): "
-    read E
-
-    if [ "$E" = "" ] ; then
-	E="$ETH"
-    fi
-
-    $ECHO ""
-    $ECHO "Do you want the link to come up on demand, or stay up continuously?"
-    $ECHO "If you want it to come up on demand, enter the idle time in seconds"
-    $ECHO "after which the link should be dropped.  If you want the link to"
-    $ECHO "stay up permanently, enter 'no' (two letters, lower-case.)"
-    $ECHO "NOTE: Demand-activated links do not interact well with dynamic IP"
-    $ECHO "addresses.  You may have some problems with demand-activated links."
-    $ECHO -n ">>> Enter the demand value (default $DEMAND): "
-    read D
-    if [ "$D" = "" ] ; then
-	D=$DEMAND
-    fi
-
-    $ECHO ""
-    $ECHO "DNS"
-    $ECHO ""
-    $ECHO "Please enter the IP address of your ISP's primary DNS server."
-    $ECHO "If your ISP claims that 'the server will provide DNS addresses',"
-    $ECHO "enter 'server' (all lower-case) here."
-    $ECHO "If you just press enter, I will assume you know what you are"
-    $ECHO "doing and not modify your DNS setup."
-    $ECHO -n ">>> Enter the DNS information here: "
-
-    read DNS1
-
-
-    if [ "$DNS1" != "" ] ; then
-        if [ "$DNS1" != "server" ] ; then
-	    $ECHO "Please enter the IP address of your ISP's secondary DNS server."
-	    $ECHO "If you just press enter, I will assume there is only one DNS server."
-	    $ECHO -n ">>> Enter the secondary DNS server address here: "
-	    read DNS2
-	fi
-    fi
-
-    while [ true ] ; do
-	$ECHO ""
-	$ECHO "PASSWORD"
-	$ECHO ""
-	stty -echo
-	$ECHO -n ">>> Please enter your PPPoE password:    "
-	read PWD1
-	$ECHO ""
-	$ECHO -n ">>> Please re-enter your PPPoE password: "
-	read PWD2
-	$ECHO ""
-	stty echo
-	if [ "$PWD1" = "$PWD2" ] ; then
-	    break
-	fi
-
-	$ECHO -n ">>> Sorry, the passwords do not match.  Try again? (y/n)"
-	read ANS
-	case "$ANS" in
-	    N|No|NO|Non|n|no|non)
-		$ECHO "OK, quitting.  Bye."
-		exit 1
-	esac
-    done
-
-    # Firewalling
-    $ECHO ""
-    $ECHO "FIREWALLING"
-    $ECHO ""
-    if test `uname -s` != "Linux" ; then
-	$ECHO "Sorry, firewalling is only supported under Linux.  Consult"
-	$ECHO "your operating system manuals for details on setting up"
-	$ECHO "packet filters for your system."
-	FIREWALL=NONE
-    else
-	$ECHO "Please choose the firewall rules to use.  Note that these rules are"
-	$ECHO "very basic.  You are strongly encouraged to use a more sophisticated"
-	$ECHO "firewall setup; however, these will provide basic security.  If you"
-	$ECHO "are running any servers on your machine, you must choose 'NONE' and"
-	$ECHO "set up firewalling yourself.  Otherwise, the firewall rules will deny"
-	$ECHO "access to all standard servers like Web, e-mail, ftp, etc.  If you"
-	$ECHO "are using SSH, the rules will block outgoing SSH connections which"
-	$ECHO "allocate a privileged source port."
-	$ECHO ""
-	while [ true ] ; do
-	    $ECHO "The firewall choices are:"
-	    $ECHO "0 - NONE: This script will not set any firewall rules.  You are responsible"
-	    $ECHO "          for ensuring the security of your machine.  You are STRONGLY"
-	    $ECHO "          recommended to use some kind of firewall rules."
-	    $ECHO "1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation"
-	    $ECHO "2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway"
-	    $ECHO "                for a LAN"
-	    $ECHO -n ">>> Choose a type of firewall (0-2): "
-	    read a
-	    if [ "$a" = 0 -o "$a" = 1 -o "$a" = 2 ] ; then
-		break
-	    fi
-	    $ECHO "Please enter a number from 0 to 2"
-	done
-
-	case "$a" in
-	    0)
-		FIREWALL=NONE
-		;;
-	    1)
-		FIREWALL=STANDALONE
-		;;
-	    2)
-		FIREWALL=MASQUERADE
-		;;
-	esac
-    fi
-
-    $ECHO ""
-    $ECHO "** Summary of what you entered **"
-    $ECHO ""
-    $ECHO "Ethernet Interface: $E"
-    $ECHO "User name:          $U"
-    if [ "$D" = "no" ] ; then
-	$ECHO "Activate-on-demand: No"
-    else
-	$ECHO "Activate-on-demand: Yes; idle timeout = $D seconds"
-    fi
-
-    if [ "$DNS1" != "" ] ; then
-        if [ "$DNS1" = "server" ] ; then
-	    $ECHO "DNS addresses:      Supplied by ISP's server"
-        else
-	    $ECHO "Primary DNS:        $DNS1"
-	    if [ "$DNS2" != "" ] ; then
-		$ECHO "Secondary DNS:      $DNS2"
-	    fi
-        fi
-    else
-	$ECHO "DNS:                Do not adjust"
-    fi
-    $ECHO "Firewalling:        $FIREWALL"
-    $ECHO ""
-    while [ true ] ; do
-        $ECHO -n '>>> Accept these settings and adjust configuration files (y/n)? '
-        read ANS
-	case "ANS" in
-	    Y|y|yes|Yes|oui|Oui)
-		ANS=y
-		;;
-            N|n|no|No|non|Non)
-		ANS=n
-		;;
-	esac
-	if [ "$ANS" = "y" -o "$ANS" = "n" ] ; then
-	    break
-        fi
-    done
-    if [ "$ANS" = "y" ] ; then
-	break
-    fi
-done
-
-# Adjust configuration files.  First to $CONFIG
-
-$ECHO "Adjusting $CONFIG"
-
-copy $CONFIG $CONFIG-bak
-if [ "$DNS1" = "server" ] ; then
-    DNSTYPE=SERVER
-    DNS1=""
-    USEPEERDNS=yes
-else
-    USEPEERDNS=no
-    if [ "$DNS1" = "" ] ; then
-	DNSTYPE=NOCHANGE
-    else
-	DNSTYPE=SPECIFY
-    fi
-fi
-
-# Where is pppd likely to put its pid?
-if [ -d /var/run ] ; then
-    VARRUN=/var/run
-else
-    VARRUN=/etc/ppp
-fi
-
-# Some #$(*& ISP's use a slash in the user name...
-sed -e "s&^USER=.*&USER='$U'&" \
-    -e "s&^ETH=.*&ETH='$E'&" \
-    -e "s&^PIDFILE=.*&PIDFILE=\"$VARRUN/\$CF_BASE-adsl.pid\"&" \
-    -e "s/^FIREWALL=.*/FIREWALL=$FIREWALL/" \
-    -e "s/^DEMAND=.*/DEMAND=$D/" \
-    -e "s/^DNSTYPE=.*/DNSTYPE=$DNSTYPE/" \
-    -e "s/^DNS1=.*/DNS1=$DNS1/" \
-    -e "s/^DNS2=.*/DNS2=$DNS2/" \
-    -e "s/^USEPEERDNS=.*/USEPEERDNS=$USEPEERDNS/" \
-    < $CONFIG-bak > $CONFIG
-
-if [ $? != 0 ] ; then
-    $ECHO "** Error modifying $CONFIG"
-    $ECHO "** Quitting"
-    exit 1
-fi
-
-if [ "$DNS1" != "" ] ; then
-    if [ "$DNS1" != "server" ] ; then
-	$ECHO "Adjusting /etc/resolv.conf"
-	if [ -r /etc/resolv.conf ] ; then
-	    grep -s "MADE-BY-RP-PPPOE" /etc/resolv.conf > /dev/null 2>&1
-	    if [ "$?" != 0 ] ; then
-		$ECHO "  (But first backing it up to /etc/resolv.conf-bak)"
-		copy /etc/resolv.conf /etc/resolv.conf-bak
-	    fi
-	fi
-	$ECHO "# MADE-BY-RP-PPPOE" > /etc/resolv.conf
-	$ECHO "nameserver $DNS1" >> /etc/resolv.conf
-	if [ "$DNS2" != "" ] ; then
-	    $ECHO "nameserver $DNS2" >> /etc/resolv.conf
-	fi
-    fi
-fi
-
-$ECHO "Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets"
-if [ -r /etc/ppp/pap-secrets ] ; then
-    $ECHO "  (But first backing it up to /etc/ppp/pap-secrets-bak)"
-    copy /etc/ppp/pap-secrets /etc/ppp/pap-secrets-bak
-else
-    cp /dev/null /etc/ppp/pap-secrets-bak
-fi
-if [ -r /etc/ppp/chap-secrets ] ; then
-    $ECHO "  (But first backing it up to /etc/ppp/chap-secrets-bak)"
-    copy /etc/ppp/chap-secrets /etc/ppp/chap-secrets-bak
-else
-    cp /dev/null /etc/ppp/chap-secrets-bak
-fi
-
-egrep -v "^$U|^\"$U\"" /etc/ppp/pap-secrets-bak > /etc/ppp/pap-secrets
-$ECHO "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/pap-secrets
-egrep -v "^$U|^\"$U\"" /etc/ppp/chap-secrets-bak > /etc/ppp/chap-secrets
-$ECHO "\"$U\"	*	\"$PWD1\"" >> /etc/ppp/chap-secrets
-
-$ECHO ""
-$ECHO ""
-$ECHO ""
-$ECHO "Congratulations, it should be all set up!"
-$ECHO ""
-$ECHO "Type 'adsl-start' to bring up your ADSL link and 'adsl-stop' to bring"
-$ECHO "it down.  Type 'adsl-status' to see the link status."
-exit 0
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-start.in b/mdk-stage1/rp-pppoe/scripts/adsl-start.in
deleted file mode 100755
index 33251a851..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-start.in
+++ /dev/null
@@ -1,186 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-start
-#
-# Shell script to bring up an ADSL connection
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-start [config_file]
-#        adsl-start interface user [config_file]
-# Second form overrides USER and ETH from config file.
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-# From AUTOCONF
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-
-# Paths to programs
-CONNECT=@sbindir@/adsl-connect
-ECHO=@ECHO@
-IFCONFIG=/sbin/ifconfig
-
-# Defaults
-CONFIG=/etc/ppp/pppoe.conf
-USER=""
-ETH=""
-ME=`basename $0`
-# Must be root
-if [ "`@ID@ -u`" != 0 ] ; then
-    $ECHO "$ME: You must be root to run this script" >& 2
-    exit 1
-fi
-
-# Debugging
-if [ "$DEBUG" = "1" ] ; then
-    $ECHO "*** Running in debug mode... please be patient..."
-    DEBUG=/tmp/pppoe-debug-$$
-    export DEBUG
-    mkdir $DEBUG
-    if [ "$?" != 0 ] ; then
-	$ECHO "Could not create directory $DEBUG... exiting"
-	exit 1
-    fi
-    DEBUG=$DEBUG/pppoe-debug.txt
-
-    # Initial debug output
-    $ECHO "---------------------------------------------" > $DEBUG
-    $ECHO "* The following section contains information about your system" >> $DEBUG
-    date >> $DEBUG
-    $ECHO "Output of uname -a" >> $DEBUG
-    uname -a >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "* The following section contains information about your network" >> $DEBUG
-    $ECHO "* interfaces.  The one you chose for PPPoE should contain the words:" >> $DEBUG
-    $ECHO "* 'UP' and 'RUNNING'.  If it does not, you probably have an Ethernet" >> $DEBUG
-    $ECHO "* driver problem." >> $DEBUG
-    $ECHO "Output of ifconfig -a" >> $DEBUG
-    $IFCONFIG -a >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    if [ "`uname -s`" = "Linux" ] ; then
-        $ECHO "* The following section contains information about kernel modules" >> $DEBUG
-	$ECHO "* If the module for your Ethernet card is 'tulip', you might" >> $DEBUG
-	$ECHO "* want to look for an updated version at http://www.scyld.com" >> $DEBUG
-	$ECHO "Output of lsmod" >> $DEBUG
-	lsmod >> $DEBUG
-	$ECHO "---------------------------------------------" >> $DEBUG
-    fi
-    $ECHO "* The following section lists your routing table." >> $DEBUG
-    $ECHO "* If you have an entry which starts with '0.0.0.0', you probably" >> $DEBUG
-    $ECHO "* have defined a default route and gateway, and pppd will" >> $DEBUG
-    $ECHO "* not create a default route using your ISP.  Try getting" >> $DEBUG
-    $ECHO "* rid of this route." >> $DEBUG
-    $ECHO "Output of netstat -n -r" >> $DEBUG
-    netstat -n -r >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "Contents of /etc/resolv.conf" >> $DEBUG
-    $ECHO "* The following section lists DNS setup." >> $DEBUG
-    $ECHO "* If you can browse by IP address, but not name, suspect" >> $DEBUG
-    $ECHO "* a DNS problem." >> $DEBUG
-    cat /etc/resolv.conf >> $DEBUG
-    $ECHO "---------------------------------------------" >> $DEBUG
-    $ECHO "* The following section lists /etc/ppp/options." >> $DEBUG
-    $ECHO "* You should have NOTHING in that file." >> $DEBUG
-    $ECHO "Contents of /etc/ppp/options" >> $DEBUG
-    cat /etc/ppp/options >> $DEBUG 2>/dev/null
-    $ECHO "---------------------------------------------" >> $DEBUG
-else
-    DEBUG=""
-fi
-
-# Sort out command-line arguments
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-    3)
-	CONFIG="$3"
-	;;
-esac
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    $ECHO "$ME: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-# Check for command-line overriding of ETH and USER
-case "$#" in
-    2|3)
-	ETH="$1"
-	USER="$2"
-	;;
-esac
-
-# Check for pidfile
-if [ -r "$PIDFILE" ] ; then
-    PID=`cat "$PIDFILE"`
-    # Check if still running
-    kill -0 $PID > /dev/null 2>&1
-    if [ $? = 0 ] ; then
-	$ECHO "$ME: There already seems to be an ADSL connection up (PID $PID)" >& 2
-	exit 1
-    fi
-    # Delete bogus PIDFILE
-    rm -f "$PIDFILE" "$PIDFILE.pppd" "$PIDFILE.pppoe" "$PIDFILE.start"
-fi
-
-echo $$ > $PIDFILE.start
-
-# Start the connection in the background unless we're debugging
-if [ "$DEBUG" != "" ] ; then
-    $CONNECT "$@"
-    exit 0
-fi
-
-$CONNECT "$@" > /dev/null 2>&1 &
-CONNECT_PID=$!
-
-if [ "$CONNECT_TIMEOUT" = "" -o "$CONNECT_TIMEOUT" = 0 ] ; then
-    exit 0
-fi
-
-# Don't monitor connection if dial-on-demand
-if [ "$DEMAND" != "" -a "$DEMAND" != "no" ] ; then
-    exit 0
-fi
-
-# Monitor connection
-TIME=0
-while [ true ] ; do
-    @sbindir@/adsl-status $CONFIG > /dev/null 2>&1
-
-    # Looks like the interface came up
-    if [ $? = 0 ] ; then
-	# Print newline if standard input is a TTY
-	tty -s && $ECHO " Connected!"
-	exit 0
-    fi
-
-    if test -n "$FORCEPING" ; then
-	$ECHO -n "$FORCEPING"
-    else
-	tty -s && $ECHO -n "$PING"
-    fi
-    sleep $CONNECT_POLL
-    TIME=`expr $TIME + $CONNECT_POLL`
-    if [ $TIME -gt $CONNECT_TIMEOUT ] ; then
-	break
-    fi
-done
-
-$ECHO "TIMED OUT" >& 2
-# Timed out!  Kill the adsl-connect process and quit
-kill $CONNECT_PID > /dev/null 2>&1
-exit 1
-
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-status b/mdk-stage1/rp-pppoe/scripts/adsl-status
deleted file mode 100755
index 18b100ab2..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-status
+++ /dev/null
@@ -1,82 +0,0 @@
-#!/bin/sh
-#***********************************************************************
-#
-# adsl-status
-#
-# Shell script to report on status of ADSL connection
-#
-# Copyright (C) 2000-2001 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-status [config_file]
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-# Defaults
-CONFIG=/etc/ppp/pppoe.conf
-
-case "$#" in
-    1)
-	CONFIG="$1"
-	;;
-esac
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    echo "$0: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-
-if [ "$DEMAND" != "no" ] ; then
-    echo "Note: You have enabled demand-connection; adsl-status may be inaccurate."
-fi
-
-# If no PPPOE_PIDFILE, connection is down, unless we're using the Linux plugin
-if [ "$LINUX_PLUGIN" = "" ] ; then
-    if [ ! -r "$PPPOE_PIDFILE" ] ; then
-	echo "adsl-status: Link is down (can't read pppoe PID file $PPPOE_PIDFILE)"
-	exit 1
-    fi
-fi
-
-# If no PPPD_PIDFILE, something fishy!
-if [ ! -r "$PPPD_PIDFILE" ] ; then
-    echo "adsl-status: Link is down (can't read pppd PID file $PPPD_PIDFILE)"
-    exit 1
-fi
-
-PPPD_PID=`cat "$PPPD_PIDFILE"`
-
-# Sigh.  Some versions of pppd put PID files in /var/run; others put them
-# in /etc/ppp.  Since it's too messy to figure out what pppd does, we
-# try both locations.
-for i in /etc/ppp/ppp*.pid /var/run/ppp*.pid ; do
-    if [ -r $i ] ; then
-	PID=`cat $i`
-	if [ "$PID" = "$PPPD_PID" ] ; then
-	    IF=`basename $i .pid`
-	    netstat -rn | grep " ${IF}\$" > /dev/null
-	    # /sbin/ifconfig $IF | grep "UP.*POINTOPOINT" > /dev/null
-	    if [ "$?" != "0" ] ; then
-		echo "adsl-status: Link is attached to $IF, but $IF is down"
-		exit 1
-	    fi
-	    echo "adsl-status: Link is up and running on interface $IF"
-	    /sbin/ifconfig $IF
-	    exit 0
-	fi
-    fi
-done
-
-echo "adsl-status: Link is down -- could not find interface corresponding to"
-echo "pppd pid $PPPD_PID"
-exit 1
\ No newline at end of file
diff --git a/mdk-stage1/rp-pppoe/scripts/adsl-stop.in b/mdk-stage1/rp-pppoe/scripts/adsl-stop.in
deleted file mode 100755
index af0867573..000000000
--- a/mdk-stage1/rp-pppoe/scripts/adsl-stop.in
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-# @configure_input@
-#***********************************************************************
-#
-# adsl-stop
-#
-# Shell script to bring down an ADSL connection
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# $Id$
-#
-# This file may be distributed under the terms of the GNU General
-# Public License.
-#
-# Usage: adsl-stop [config_file]
-# If config_file is omitted, defaults to /etc/ppp/pppoe.conf
-#
-#***********************************************************************
-
-ME="`basename $0`"
-LOGGER="/usr/bin/logger -t $ME"
-CONFIG="$1"
-if [ "$CONFIG" = "" ] ; then
-    CONFIG=/etc/ppp/pppoe.conf
-fi
-
-if [ ! -f "$CONFIG" -o ! -r "$CONFIG" ] ; then
-    echo "$ME: Cannot read configuration file '$CONFIG'" >& 2
-    exit 1
-fi
-
-. $CONFIG
-
-PPPOE_PIDFILE="$PIDFILE.pppoe"
-PPPD_PIDFILE="$PIDFILE.pppd"
-STARTPID="$PIDFILE.start"
-
-# Backward config file compatibility
-if test "$DEMAND" = "" ; then
-	DEMAND=no
-fi
-
-# Ignore SIGTERM
-trap "" 15
-
-# Check for pidfile
-if [ -r "$PIDFILE" ] ; then
-    PID=`cat $PIDFILE`
-
-    # Check if still running
-    kill -0 $PID > /dev/null 2>&1
-    if [ $? != 0 ] ; then
-	echo "$ME: The adsl-connect script (PID $PID) appears to have died" >& 2
-    fi
-
-    # Kill pppd, which should in turn kill pppoe
-    if [ -r "$PPPD_PIDFILE" ] ; then
-	PPPD_PID=`cat "$PPPD_PIDFILE"`
-	$LOGGER -p daemon.notice "Killing pppd"
-	echo "Killing pppd ($PPPD_PID)"
-	kill $PPPD_PID > /dev/null 2>&1 || exit 1
-    fi
-
-    # Kill adsl-start
-    PIDS=`cat $STARTPID`
-    kill -0 $PIDS > /dev/null 2>&1
-    if [ $? = 0 ] ; then
-	$LOGGER -p daemon.notice "Killing adsl-connect"
-	kill $PIDS > /dev/null 2>&1
-    fi
-
-    # Kill adsl-connect
-    $LOGGER -p daemon.notice "Killing adsl-connect"
-    echo "Killing adsl-connect ($PID)"
-    kill $PID > /dev/null 2>&1
-
-    rm -f "$PIDFILE" "$PPPD_PIDFILE" "$PPPOE_PIDFILE" "$STARTPID"
-else
-    echo "$ME: No ADSL connection appears to be running" >&2
-    exit 1
-fi
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/src/.cvsignore b/mdk-stage1/rp-pppoe/src/.cvsignore
deleted file mode 100644
index a59197332..000000000
--- a/mdk-stage1/rp-pppoe/src/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-pppoe
-pppoe-DIET
diff --git a/mdk-stage1/rp-pppoe/src/Makefile b/mdk-stage1/rp-pppoe/src/Makefile
deleted file mode 100644
index d36ad6c60..000000000
--- a/mdk-stage1/rp-pppoe/src/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ../..
-
-include $(top_dir)/Makefile.common
-
-
-TARGETS = pppoe
-
-BINTARGET = ../pppoe-bin
-
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a $(BINTARGET) pppoe
-
-FLAGS = -Wall -Werror -Os -fomit-frame-pointer '-DPPPOE_PATH="/sbin/pppoe"' '-DPPPD_PATH="/sbin/pppd"' '-DVERSION="3.0-stg1"'
-
-ifeq (GLIBC, $(L))
-EXTRA_LDFLAGS = -static
-endif
-
-OBJS = pppoe.o if.o debug.o common.o ppp.o discovery.o
-
-pppoe: $(OBJS)
-	$(DIET) gcc -o $@ $^ $(EXTRA_LDFLAGS)
-	$(STRIPCMD) $@
-	cp -f $@ $(BINTARGET)
-
-$(OBJS): %.o: %.c
-	$(DIET) gcc $(FLAGS) $(INCLUDES) $(INCS) -c $< -o $@
diff --git a/mdk-stage1/rp-pppoe/src/Makefile.in b/mdk-stage1/rp-pppoe/src/Makefile.in
deleted file mode 100644
index 8eee012cb..000000000
--- a/mdk-stage1/rp-pppoe/src/Makefile.in
+++ /dev/null
@@ -1,257 +0,0 @@
-# @configure_input@
-#***********************************************************************
-#
-# Makefile
-#
-# Makefile for Roaring Penguin's Linux user-space PPPoE client.
-#
-# Copyright (C) 2000 Roaring Penguin Software Inc.
-#
-# This program may be distributed according to the terms of the GNU
-# General Public License, version 2 or (at your option) any later version.
-#
-# $Id$
-#***********************************************************************
-
-# Version is set ONLY IN THE MAKEFILE!  Don't delete this!
-VERSION=3.0
-
-DEFINES= 
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-mandir=@mandir@
-docdir=@prefix@/doc/rp-pppoe-$(VERSION)
-install=@INSTALL@
-install_dir=@INSTALL@ -d
-sbindir=@sbindir@
-
-# Plugin for pppd on Linux
-LINUX_KERNELMODE_PLUGIN=@LINUX_KERNELMODE_PLUGIN@
-PPPD_INCDIR=@PPPD_INCDIR@
-
-# PPPoE relay -- currently only supported on Linux
-PPPOE_RELAY=@PPPOE_RELAY@
-
-# Program paths
-PPPOE_PATH=$(sbindir)/pppoe
-PPPD_PATH=@PPPD@
-
-# Kernel-mode plugin gets installed here.
-PLUGIN_DIR=/etc/ppp/plugins
-PLUGIN_PATH=$(PLUGIN_DIR)/rp-pppoe.so
-
-# Configuration file paths
-PPPOESERVER_PPPD_OPTIONS=/etc/ppp/pppoe-server-options
-
-PATHS='-DPPPOE_PATH="$(PPPOE_PATH)"' '-DPPPD_PATH="$(PPPD_PATH)"' \
-	'-DPLUGIN_PATH="$(PLUGIN_PATH)"' \
-	'-DPPPOE_SERVER_OPTIONS="$(PPPOESERVER_PPPD_OPTIONS)"'
-
-CFLAGS= @CFLAGS@ $(DEFINES) $(PATHS)
-TARGETS=@TARGETS@
-
-all: $(TARGETS)
-	@echo ""
-	@echo "Type 'make install' as root to install the software."
-
-pppoe-sniff: pppoe-sniff.o if.o common.o debug.o
-	@CC@ -o pppoe-sniff pppoe-sniff.o if.o common.o debug.o $(LIBS)
-
-pppoe-server: pppoe-server.o if.o debug.o common.o md5.o
-	@CC@ -o pppoe-server pppoe-server.o if.o debug.o common.o md5.o $(LIBS)
-
-pppoe: pppoe.o if.o debug.o common.o ppp.o discovery.o
-	@CC@ -o pppoe pppoe.o if.o debug.o common.o ppp.o discovery.o $(LIBS)
-
-pppoe-relay: relay.o if.o debug.o common.o
-	@CC@ -o pppoe-relay relay.o if.o debug.o common.o $(LIBS)
-
-pppoe.o: pppoe.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe.o pppoe.c
-
-discovery.o: discovery.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o discovery.o discovery.c
-
-ppp.o: ppp.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o ppp.o ppp.c
-
-md5.o: md5.c md5.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o md5.o md5.c
-
-pppoe-server.o: pppoe-server.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe-server.o pppoe-server.c
-
-pppoe-sniff.o: pppoe-sniff.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o pppoe-sniff.o pppoe-sniff.c
-
-if.o: if.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o if.o if.c
-
-common.o: common.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o common.o common.c
-
-debug.o: debug.c pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o debug.o debug.c
-
-relay.o: relay.c relay.h pppoe.h
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o relay.o relay.c
-
-# Linux-specific plugin
-rp-pppoe.so: plugin/libplugin.a plugin/plugin.o
-	@CC@ -o rp-pppoe.so -shared plugin/plugin.o plugin/libplugin.a
-
-plugin/plugin.o: plugin.c
-	@CC@ '-DVERSION="$(VERSION)"' -I$(PPPD_INCDIR) -c -o plugin/plugin.o -fPIC plugin.c
-
-plugin/libplugin.a: plugin/discovery.o plugin/if.o plugin/common.o plugin/debug.o
-	ar -rc $@ $^
-
-plugin/discovery.o: discovery.c
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/discovery.o -fPIC discovery.c
-
-plugin/if.o: if.c
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/if.o -fPIC if.c
-
-plugin/debug.o: debug.c
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/debug.o -fPIC debug.c
-
-plugin/common.o: common.c
-	@CC@ $(CFLAGS) '-DVERSION="$(VERSION)"' -c -o plugin/common.o -fPIC common.c
-
-install: all
-	-mkdir -p $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 -s pppoe $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 -s pppoe-server $(RPM_INSTALL_ROOT)$(sbindir)
-	if test -x pppoe-relay ; then $(install) -m 755 -s pppoe-relay $(RPM_INSTALL_ROOT)$(sbindir); fi
-	$(install) -m 755 -s pppoe-sniff $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-connect $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-start $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-status $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-stop $(RPM_INSTALL_ROOT)$(sbindir)
-	$(install) -m 755 ../scripts/adsl-setup $(RPM_INSTALL_ROOT)$(sbindir)
-	-mkdir -p $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../doc/CHANGES $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../doc/KERNEL-MODE-PPPOE $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../doc/HOW-TO-CONNECT $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../doc/LICENSE $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../README $(RPM_INSTALL_ROOT)$(docdir)
-	$(install) -m 644 ../configs/pap-secrets $(RPM_INSTALL_ROOT)$(docdir)
-	-mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man8
-	for i in $(TARGETS) ; do \
-		if test -f ../man/$$i.8 ; then \
-			$(install) -m 644 ../man/$$i.8 $(RPM_INSTALL_ROOT)$(mandir)/man8 || exit 1; \
-		fi; \
-	done
-	$(install) -m 644 ../man/adsl-start.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	$(install) -m 644 ../man/adsl-stop.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	$(install) -m 644 ../man/adsl-status.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	$(install) -m 644 ../man/adsl-connect.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	$(install) -m 644 ../man/adsl-setup.8 $(RPM_INSTALL_ROOT)$(mandir)/man8
-	-mkdir -p $(RPM_INSTALL_ROOT)$(mandir)/man5
-	$(install) -m 644 ../man/pppoe.conf.5 $(RPM_INSTALL_ROOT)$(mandir)/man5
-	-mkdir -p $(RPM_INSTALL_ROOT)/etc/ppp
-	-mkdir -p $(RPM_INSTALL_ROOT)$(PLUGIN_DIR)
-	-echo "# Directory created by rp-pppoe for kernel-mode plugin" > $(RPM_INSTALL_ROOT)$(PLUGIN_DIR)/README
-	@if test -r rp-pppoe.so; then $(install) -m 755 rp-pppoe.so $(RPM_INSTALL_ROOT)$(PLUGIN_DIR); fi
-	@for i in pppoe.conf firewall-standalone firewall-masq ; do \
-		if [ ! -f $(RPM_INSTALL_ROOT)/etc/ppp/$$i ] ; then \
-			$(install) -m 644 ../configs/$$i $(RPM_INSTALL_ROOT)/etc/ppp ; \
-		else \
-			echo "NOT overwriting existing $(RPM_INSTALL_ROOT)/etc/ppp/$$i" ;\
-			$(install) -m 644 ../configs/$$i $(RPM_INSTALL_ROOT)/etc/ppp/$$i-$(VERSION) ;\
-		fi ;\
-	done
-	@if [ ! -f $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS) ] ; then \
-		$(install) -m 644 ../configs/pppoe-server-options $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS) ; \
-	else \
-		echo "NOT overwriting existing $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS)"; \
-		$(install) -m 644 ../configs/pppoe-server-options $(RPM_INSTALL_ROOT)$(PPPOESERVER_PPPD_OPTIONS)-example ; \
-	fi
-	@if [ -f /etc/redhat-release ] ; then \
-		echo "Looks like a Red Hat system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
-		mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
-		$(install) -m 755 ../scripts/adsl-init $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
-	fi
-	@if [ -f /etc/turbolinux-release ] ; then \
-		echo "Looks like a TurboLinux system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
-		mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
-		$(install) -m 755 adsl-init-turbolinux $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
-	fi
-	@if [ -f /etc/SuSE-release ] ; then \
-		echo "Looks like a SuSE Linux system; installing $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl" ; \
-		mkdir -p $(RPM_INSTALL_ROOT)/etc/rc.d/init.d ;\
-		$(install) -m 755 ../scripts/adsl-init-suse $(RPM_INSTALL_ROOT)/etc/rc.d/init.d/adsl ; \
-	fi
-	@echo ""
-	@echo "Type 'adsl-setup' to configure the software."
-
-distro:
-	cd ..; \
-	rm -rf rp-pppoe-$(VERSION) ; \
-	mkdir rp-pppoe-$(VERSION) || exit 1; \
-	for i in README go go-gui rp-pppoe.spec rp-pppoe-gui.spec; do \
-		cp $$i rp-pppoe-$(VERSION) || exit 1; \
-	done ; \
-	mkdir rp-pppoe-$(VERSION)/gui || exit 1; \
-	for i in Makefile.in tkpppoe.in wrapper.c tkpppoe.1 pppoe-wrapper.1 ; do \
-		cp gui/$$i rp-pppoe-$(VERSION)/gui || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/gui/html || exit 1; \
-	for i in mainwin-busy.png mainwin-nonroot.png mainwin.png props-advanced.png props-basic.png props-nic.png props-options.png tkpppoe.html ; do \
-		cp gui/html/$$i rp-pppoe-$(VERSION)/gui/html || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/configs || exit 1; \
-	for i in firewall-masq firewall-standalone pap-secrets pppoe-server-options pppoe.conf ; do \
-		cp configs/$$i rp-pppoe-$(VERSION)/configs || exit 1; \
-	done ; \
-	mkdir rp-pppoe-$(VERSION)/doc || exit 1; \
-	for i in CHANGES KERNEL-MODE-PPPOE HOW-TO-CONNECT LICENSE PROBLEMS ; do \
-		cp doc/$$i rp-pppoe-$(VERSION)/doc || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/man || exit 1; \
-	for i in adsl-connect.8 adsl-setup.8 adsl-start.8 adsl-status.8 adsl-stop.8 pppoe-server.8 pppoe-sniff.8 pppoe.8 pppoe-relay.8 pppoe.conf.5 ; do \
-		cp man/$$i rp-pppoe-$(VERSION)/man || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/scripts || exit 1; \
-	for i in adsl-connect.in adsl-init-suse.in adsl-init-turbolinux.in adsl-init.in adsl-setup.in adsl-start.in adsl-stop.in adsl-status ; do \
-		cp scripts/$$i rp-pppoe-$(VERSION)/scripts || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/src || exit 1; \
-	for i in Makefile.in install-sh common.c config.h.in configure configure.in debug.c discovery.c if.c md5.c md5.h ppp.c pppoe-server.c pppoe-sniff.c pppoe.c pppoe.h plugin.c relay.c relay.h ; do \
-		cp src/$$i rp-pppoe-$(VERSION)/src || exit 1; \
-	done; \
-	mkdir rp-pppoe-$(VERSION)/src/plugin || exit 1; \
-	tar cvf rp-pppoe-$(VERSION).tar rp-pppoe-$(VERSION)/* ; \
-	gzip -f -v -9 rp-pppoe-$(VERSION).tar ; \
-
-rpms: distro
-	cp ../rp-pppoe-$(VERSION).tar.gz /usr/src/redhat/SOURCES
-	cd ..; \
-	rpm -ba rp-pppoe.spec; \
-	rpm -ba rp-pppoe-gui.spec
-
-clean:
-	rm -f *.o pppoe pppoe-sniff pppoe-server core rp-pppoe.so plugin/*.o plugin/libplugin.a *~
-
-distclean: clean
-	rm -f Makefile config.h config.cache config.log config.status
-	rm -f ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-setup ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux
-
-update-version:
-	sed -e 's/^Version: .*$$/Version: $(VERSION)/' ../rp-pppoe.spec > ../rp-pppoe.spec.new && mv ../rp-pppoe.spec.new ../rp-pppoe.spec
-	sed -e 's+^Source: .*$$+Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-$(VERSION).tar.gz+' ../rp-pppoe.spec > ../rp-pppoe.spec.new && mv ../rp-pppoe.spec.new ../rp-pppoe.spec
-	sed -e 's/^Version: .*$$/Version: $(VERSION)/' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
-	sed -e 's+^Source: .*$$+Source: http://www.roaringpenguin.com/pppoe/rp-pppoe-$(VERSION).tar.gz+' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
-	sed -e 's+^Requires: rp-pppoe >=.*$$+Requires: rp-pppoe >= $(VERSION)+' ../rp-pppoe-gui.spec > ../rp-pppoe-gui.spec.new && mv ../rp-pppoe-gui.spec.new ../rp-pppoe-gui.spec
-
-# Convenience target for David!  Don't try to use this one.
-km:
-	./configure --enable-plugin=/home/dfs/Archive/PPP/ppp-2.4.0.pppoe4-patched-dfs
-
-.PHONY: update-version
-
-.PHONY: clean
-
-.PHONY: distclean
-
-.PHONY: rpms
diff --git a/mdk-stage1/rp-pppoe/src/common.c b/mdk-stage1/rp-pppoe/src/common.c
deleted file mode 100644
index b6e43996b..000000000
--- a/mdk-stage1/rp-pppoe/src/common.c
+++ /dev/null
@@ -1,485 +0,0 @@
-/***********************************************************************
-*
-* common.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Common functions used by PPPoE client and server
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-/**********************************************************************
-*%FUNCTION: parsePacket
-*%ARGUMENTS:
-* packet -- the PPPoE discovery packet to parse
-* func -- function called for each tag in the packet
-* extra -- an opaque data pointer supplied to parsing function
-*%RETURNS:
-* 0 if everything went well; -1 if there was an error
-*%DESCRIPTION:
-* Parses a PPPoE discovery packet, calling "func" for each tag in the packet.
-* "func" is passed the additional argument "extra".
-***********************************************************************/
-int
-parsePacket(PPPoEPacket *packet, ParseFunc *func, void *extra)
-{
-    UINT16_t len = ntohs(packet->length);
-    unsigned char *curTag;
-    UINT16_t tagType, tagLen;
-
-    if (packet->ver != 1) {
-	syslog(LOG_ERR, "Invalid PPPoE version (%d)", (int) packet->ver);
-	return -1;
-    }
-    if (packet->type != 1) {
-	syslog(LOG_ERR, "Invalid PPPoE type (%d)", (int) packet->type);
-	return -1;
-    }
-
-    /* Do some sanity checks on packet */
-    if (len > ETH_DATA_LEN - 6) { /* 6-byte overhead for PPPoE header */
-	syslog(LOG_ERR, "Invalid PPPoE packet length (%u)", len);
-	return -1;
-    }
-
-    /* Step through the tags */
-    curTag = packet->payload;
-    while(curTag - packet->payload < len) {
-	/* Alignment is not guaranteed, so do this by hand... */
-	tagType = (((UINT16_t) curTag[0]) << 8) +
-	    (UINT16_t) curTag[1];
-	tagLen = (((UINT16_t) curTag[2]) << 8) +
-	    (UINT16_t) curTag[3];
-	if (tagType == TAG_END_OF_LIST) {
-	    return 0;
-	}
-	if ((curTag - packet->payload) + tagLen + TAG_HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Invalid PPPoE tag length (%u)", tagLen);
-	    return -1;
-	}
-	func(tagType, tagLen, curTag+TAG_HDR_SIZE, extra);
-	curTag = curTag + TAG_HDR_SIZE + tagLen;
-    }
-    return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: findTag
-*%ARGUMENTS:
-* packet -- the PPPoE discovery packet to parse
-* type -- the type of the tag to look for
-* tag -- will be filled in with tag contents
-*%RETURNS:
-* A pointer to the tag if one of the specified type is found; NULL
-* otherwise. 
-*%DESCRIPTION:
-* Looks for a specific tag type.
-***********************************************************************/
-unsigned char *
-findTag(PPPoEPacket *packet, UINT16_t type, PPPoETag *tag)
-{
-    UINT16_t len = ntohs(packet->length);
-    unsigned char *curTag;
-    UINT16_t tagType, tagLen;
-
-    if (packet->ver != 1) {
-	syslog(LOG_ERR, "Invalid PPPoE version (%d)", (int) packet->ver);
-	return NULL;
-    }
-    if (packet->type != 1) {
-	syslog(LOG_ERR, "Invalid PPPoE type (%d)", (int) packet->type);
-	return NULL;
-    }
-
-    /* Do some sanity checks on packet */
-    if (len > ETH_DATA_LEN - 6) { /* 6-byte overhead for PPPoE header */
-	syslog(LOG_ERR, "Invalid PPPoE packet length (%u)", len);
-	return NULL;
-    }
-
-    /* Step through the tags */
-    curTag = packet->payload;
-    while(curTag - packet->payload < len) {
-	/* Alignment is not guaranteed, so do this by hand... */
-	tagType = (((UINT16_t) curTag[0]) << 8) +
-	    (UINT16_t) curTag[1];
-	tagLen = (((UINT16_t) curTag[2]) << 8) +
-	    (UINT16_t) curTag[3];
-	if (tagType == TAG_END_OF_LIST) {
-	    return NULL;
-	}
-	if ((curTag - packet->payload) + tagLen + TAG_HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Invalid PPPoE tag length (%u)", tagLen);
-	    return NULL;
-	}
-	if (tagType == type) {
-	    memcpy(tag, curTag, tagLen + TAG_HDR_SIZE);
-	    return curTag;
-	}
-	curTag = curTag + TAG_HDR_SIZE + tagLen;
-    }
-    return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: printErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog.
-***********************************************************************/
-void
-printErr(char const *str)
-{
-    fprintf(stderr, "pppoe: %s\n", str);
-    syslog(LOG_ERR, "%s", str);
-}
-
-
-/**********************************************************************
-*%FUNCTION: strDup
-*%ARGUMENTS:
-* str -- string to copy
-*%RETURNS:
-* A malloc'd copy of str.  Exits if malloc fails.
-***********************************************************************/
-char *
-strDup(char const *str)
-{
-    char *copy = malloc(strlen(str)+1);
-    if (!copy) {
-	rp_fatal("strdup failed");
-    }
-    strcpy(copy, str);
-    return copy;
-}
-
-/**********************************************************************
-*%FUNCTION: computeTCPChecksum
-*%ARGUMENTS:
-* ipHdr -- pointer to IP header
-* tcpHdr -- pointer to TCP header
-*%RETURNS:
-* The computed TCP checksum
-***********************************************************************/
-UINT16_t
-computeTCPChecksum(unsigned char *ipHdr, unsigned char *tcpHdr)
-{
-    UINT32_t sum = 0;
-    UINT16_t count = ipHdr[2] * 256 + ipHdr[3];
-    unsigned char *addr = tcpHdr;
-    unsigned char pseudoHeader[12];
-
-    /* Count number of bytes in TCP header and data */
-    count -= (ipHdr[0] & 0x0F) * 4;
-
-    memcpy(pseudoHeader, ipHdr+12, 8);
-    pseudoHeader[8] = 0;
-    pseudoHeader[9] = ipHdr[9];
-    pseudoHeader[10] = (count >> 8) & 0xFF;
-    pseudoHeader[11] = (count & 0xFF);
-
-    /* Checksum the pseudo-header */
-    sum += * (UINT16_t *) pseudoHeader;
-    sum += * ((UINT16_t *) (pseudoHeader+2));
-    sum += * ((UINT16_t *) (pseudoHeader+4));
-    sum += * ((UINT16_t *) (pseudoHeader+6));
-    sum += * ((UINT16_t *) (pseudoHeader+8));
-    sum += * ((UINT16_t *) (pseudoHeader+10));
-
-    /* Checksum the TCP header and data */
-    while (count > 1) {
-	sum += * (UINT16_t *) addr;
-	addr += 2;
-	count -= 2;
-    }
-    if (count > 0) {
-	sum += *addr;
-    }
-
-    while(sum >> 16) {
-	sum = (sum & 0xffff) + (sum >> 16);
-    }
-    return (UINT16_t) (~sum & 0xFFFF);
-}
-
-/**********************************************************************
-*%FUNCTION: clampMSS
-*%ARGUMENTS:
-* packet -- PPPoE session packet
-* dir -- either "incoming" or "outgoing"
-* clampMss -- clamp value
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Clamps MSS option if TCP SYN flag is set.
-***********************************************************************/
-void
-clampMSS(PPPoEPacket *packet, char const *dir, int clampMss)
-{
-    unsigned char *tcpHdr;
-    unsigned char *ipHdr;
-    unsigned char *opt;
-    unsigned char *endHdr;
-    unsigned char *mssopt = NULL;
-    UINT16_t csum;
-
-    int len;
-
-    /* Is it IPv4? */
-    if (packet->payload[0] != 0x00 ||
-	packet->payload[1] != 0x21) {
-	/* Nope, ignore it */
-	return;
-    }
-
-    ipHdr = packet->payload + 2;
-
-    /* Is it too short? */
-    len = (int) ntohs(packet->length);
-    if (len < 42) {
-	/* 20 byte IP header; 20 byte TCP header; 2 byte PPP protocol */
-	return;
-    }
-
-    /* Verify once more that it's IPv4 */
-    if ((ipHdr[0] & 0xF0) != 0x40) {
-	return;
-    }
-
-    /* Is it a fragment that's not at the beginning of the packet? */
-    if ((ipHdr[6] & 0x1F) || ipHdr[7]) {
-	/* Yup, don't touch! */
-	return;
-    }
-    /* Is it TCP? */
-    if (ipHdr[9] != 0x06) {
-	return;
-    }
-
-    /* Get start of TCP header */
-    tcpHdr = ipHdr + (ipHdr[0] & 0x0F) * 4;
-
-    /* Is SYN set? */
-    if (!(tcpHdr[13] & 0x02)) {
-	return;
-    }
-
-    /* Compute and verify TCP checksum -- do not touch a packet with a bad
-       checksum */
-    csum = computeTCPChecksum(ipHdr, tcpHdr);
-    if (csum) {
-	syslog(LOG_ERR, "Bad TCP checksum %x", (unsigned int) csum);
-
-	/* Upper layers will drop it */
-	return;
-    }
-
-    /* Look for existing MSS option */
-    endHdr = tcpHdr + ((tcpHdr[12] & 0xF0) >> 2);
-    opt = tcpHdr + 20;
-    while (opt < endHdr) {
-	if (!*opt) break;	/* End of options */
-	switch(*opt) {
-	case 1:
-	    opt++;
-	    break;
-
-	case 2:
-	    if (opt[1] != 4) {
-		/* Something fishy about MSS option length. */
-		syslog(LOG_ERR,
-		       "Bogus length for MSS option (%u) from %u.%u.%u.%u",
-		       (unsigned int) opt[1],
-		       (unsigned int) ipHdr[12],
-		       (unsigned int) ipHdr[13],
-		       (unsigned int) ipHdr[14],
-		       (unsigned int) ipHdr[15]);
-		return;
-	    }
-	    mssopt = opt;
-	    break;
-	default:
-	    if (opt[1] < 2) {
-		/* Someone's trying to attack us? */
-		syslog(LOG_ERR,
-		       "Bogus TCP option length (%u) from %u.%u.%u.%u",
-		       (unsigned int) opt[1],
-		       (unsigned int) ipHdr[12],
-		       (unsigned int) ipHdr[13],
-		       (unsigned int) ipHdr[14],
-		       (unsigned int) ipHdr[15]);
-		return;
-	    }
-	    opt += (opt[1]);
-	    break;
-	}
-	/* Found existing MSS option? */
-	if (mssopt) break;
-    }
-
-    /* If MSS exists and it's low enough, do nothing */
-    if (mssopt) {
-	unsigned mss = mssopt[2] * 256 + mssopt[3];
-	if (mss <= clampMss) {
-	    return;
-	}
-
-	mssopt[2] = (((unsigned) clampMss) >> 8) & 0xFF;
-	mssopt[3] = ((unsigned) clampMss) & 0xFF;
-    } else {
-	/* No MSS option.  Don't add one; we'll have to use 536. */
-	return;
-    }
-
-    /* Recompute TCP checksum */
-    tcpHdr[16] = 0;
-    tcpHdr[17] = 0;
-    csum = computeTCPChecksum(ipHdr, tcpHdr);
-    (* (UINT16_t *) (tcpHdr+16)) = csum;
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADT
-*%ARGUMENTS:
-* conn -- PPPoE connection
-* msg -- if non-NULL, extra error message to include in PADT packet.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADT packet
-***********************************************************************/
-void
-sendPADT(PPPoEConnection *conn, char const *msg)
-{
-    PPPoEPacket packet;
-    unsigned char *cursor = packet.payload;
-
-    UINT16_t plen = 0;
-
-    /* Do nothing if no session established yet */
-    if (!conn->session) return;
-
-    /* Do nothing if no discovery socket */
-    if (conn->discoverySocket < 0) return;
-
-    memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
-    memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    packet.ver = 1;
-    packet.type = 1;
-    packet.code = CODE_PADT;
-    packet.session = conn->session;
-
-    /* Reset Session to zero so there is no possibility of
-       recursive calls to this function by any signal handler */
-    conn->session = 0;
-
-    /* If we're using Host-Uniq, copy it over */
-    if (conn->useHostUniq) {
-	PPPoETag hostUniq;
-	pid_t pid = getpid();
-	hostUniq.type = htons(TAG_HOST_UNIQ);
-	hostUniq.length = htons(sizeof(pid));
-	memcpy(hostUniq.payload, &pid, sizeof(pid));
-	memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
-	cursor += sizeof(pid) + TAG_HDR_SIZE;
-	plen += sizeof(pid) + TAG_HDR_SIZE;
-    }
-
-    /* Copy error message */
-    if (msg) {
-	PPPoETag err;
-	size_t elen = strlen(msg);
-	err.type = htons(TAG_GENERIC_ERROR);
-	err.length = htons(elen);
-	strcpy((char *)err.payload, msg);
-	memcpy(cursor, &err, elen + TAG_HDR_SIZE);
-	cursor += elen + TAG_HDR_SIZE;
-	plen += elen + TAG_HDR_SIZE;
-    }
-	    
-    /* Copy cookie and relay-ID if needed */
-    if (conn->cookie.type) {
-	CHECK_ROOM(cursor, packet.payload,
-		   ntohs(conn->cookie.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &conn->cookie, ntohs(conn->cookie.length) + TAG_HDR_SIZE);
-	cursor += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
-	plen += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
-    }
-
-    if (conn->relayId.type) {
-	CHECK_ROOM(cursor, packet.payload,
-		   ntohs(conn->relayId.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &conn->relayId, ntohs(conn->relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
-    }
-
-    packet.length = htons(plen);
-    sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "SENT");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-    syslog(LOG_INFO,"Sent PADT");
-}
-
-/**********************************************************************
-*%FUNCTION: parseLogErrs
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks error tags out of a packet and logs them.
-***********************************************************************/
-void
-parseLogErrs(UINT16_t type, UINT16_t len, unsigned char *data,
-	     void *extra)
-{
-    switch(type) {
-    case TAG_SERVICE_NAME_ERROR:
-	syslog(LOG_ERR, "PADT: Service-Name-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADT: Service-Name-Error: %.*s\n", (int) len, data);
-	break;
-    case TAG_AC_SYSTEM_ERROR:
-	syslog(LOG_ERR, "PADT: System-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADT: System-Error: %.*s\n", (int) len, data);
-	break;
-    case TAG_GENERIC_ERROR:
-	syslog(LOG_ERR, "PADT: Generic-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADT: Generic-Error: %.*s\n", (int) len, data);
-	break;
-    }
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/config.h b/mdk-stage1/rp-pppoe/src/config.h
deleted file mode 100644
index e3adf4353..000000000
--- a/mdk-stage1/rp-pppoe/src/config.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* config.h.  Generated automatically by configure.  */
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
-#define HAVE_SYS_WAIT_H 1
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-/* #undef pid_t */
-
-/* Define as the return type of signal handlers (int or void).  */
-#define RETSIGTYPE void
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-/* #undef SETVBUF_REVERSED */
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#define TIME_WITH_SYS_TIME 1
-
-/* Define if your <sys/time.h> declares struct tm.  */
-/* #undef TM_IN_SYS_TIME */
-
-#define HAVE_STRUCT_SOCKADDR_LL 1
-
-/* The number of bytes in a unsigned int.  */
-#define SIZEOF_UNSIGNED_INT 4
-
-/* The number of bytes in a unsigned long.  */
-#define SIZEOF_UNSIGNED_LONG 4
-
-/* The number of bytes in a unsigned short.  */
-#define SIZEOF_UNSIGNED_SHORT 2
-
-/* Define if you have the select function.  */
-#define HAVE_SELECT 1
-
-/* Define if you have the socket function.  */
-#define HAVE_SOCKET 1
-
-/* Define if you have the strerror function.  */
-#define HAVE_STRERROR 1
-
-/* Define if you have the strtol function.  */
-#define HAVE_STRTOL 1
-
-/* Define if you have the <asm/types.h> header file.  */
-#define HAVE_ASM_TYPES_H 1
-
-/* Define if you have the <fcntl.h> header file.  */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the <getopt.h> header file.  */
-#define HAVE_GETOPT_H 1
-
-/* Define if you have the <linux/if_ether.h> header file.  */
-#define HAVE_LINUX_IF_ETHER_H 1
-
-/* Define if you have kernel-mode PPPoE in Linux file.  */
-/* #undef HAVE_LINUX_KERNEL_PPPOE */
-
-/* Define if you have the <linux/if_packet.h> header file.  */
-#define HAVE_LINUX_IF_PACKET_H 1
-
-/* Define if you have the <linux/if_pppox.h> header file.  */
-#define HAVE_LINUX_IF_PPPOX_H 1
-
-/* Define if you have the <net/bpf.h> header file.  */
-#define HAVE_NET_BPF_H 1
-
-/* Define if you have the <net/if_arp.h> header file.  */
-//#define HAVE_NET_IF_ARP_H 1
-
-/* Define if you have the <net/ethernet.h> header file.  */
-#define HAVE_NET_ETHERNET_H 1
-
-/* Define if you have the <net/if.h> header file.  */
-#define HAVE_NET_IF_H 1
-
-/* Define if you have the <linux/if.h> header file.  */
-#define HAVE_LINUX_IF_H 1
-
-/* Define if you have the <net/if_dl.h> header file.  */
-/* #undef HAVE_NET_IF_DL_H */
-
-/* Define if you have the <net/if_ether.h> header file.  */
-/* #undef HAVE_NET_IF_ETHER_H */
-
-/* Define if you have the <net/if_types.h> header file.  */
-/* #undef HAVE_NET_IF_TYPES_H */
-
-/* Define if you have the <netinet/if_ether.h> header file.  */
-//#define HAVE_NETINET_IF_ETHER_H 1
-
-/* Define if you have the <netpacket/packet.h> header file.  */
-#define HAVE_NETPACKET_PACKET_H 1
-
-/* Define if you have the <sys/cdefs.h> header file.  */
-#define HAVE_SYS_CDEFS_H 1
-
-/* Define if you have the <sys/dlpi.h> header file.  */
-/* #undef HAVE_SYS_DLPI_H */
-
-/* Define if you have the <sys/ioctl.h> header file.  */
-#define HAVE_SYS_IOCTL_H 1
-
-/* Define if you have the <sys/param.h> header file.  */
-#define HAVE_SYS_PARAM_H 1
-
-/* Define if you have the <sys/socket.h> header file.  */
-#define HAVE_SYS_SOCKET_H 1
-
-/* Define if you have the <sys/time.h> header file.  */
-#define HAVE_SYS_TIME_H 1
-
-/* Define if you have the <sys/uio.h> header file.  */
-#define HAVE_SYS_UIO_H 1
-
-/* Define if you have the <syslog.h> header file.  */
-#define HAVE_SYSLOG_H 1
-
-/* Define if you have the <unistd.h> header file.  */
-#define HAVE_UNISTD_H 1
-
-/* Define if you have the N_HDLC line discipline in linux/termios.h */
-#define HAVE_N_HDLC 1
-
-/* Define if bitfields are packed in reverse order */
-#define PACK_BITFIELDS_REVERSED 1
diff --git a/mdk-stage1/rp-pppoe/src/config.h.in b/mdk-stage1/rp-pppoe/src/config.h.in
deleted file mode 100644
index e3340389d..000000000
--- a/mdk-stage1/rp-pppoe/src/config.h.in
+++ /dev/null
@@ -1,134 +0,0 @@
-/* config.h.in.  Generated automatically from configure.in by autoheader.  */
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define if you have <sys/wait.h> that is POSIX.1 compatible.  */
-#undef HAVE_SYS_WAIT_H
-
-/* Define to `int' if <sys/types.h> doesn't define.  */
-#undef pid_t
-
-/* Define as the return type of signal handlers (int or void).  */
-#undef RETSIGTYPE
-
-/* Define if the setvbuf function takes the buffering type as its second
-   argument and the buffer pointer as the third, as on System V
-   before release 3.  */
-#undef SETVBUF_REVERSED
-
-/* Define if you have the ANSI C header files.  */
-#undef STDC_HEADERS
-
-/* Define if you can safely include both <sys/time.h> and <time.h>.  */
-#undef TIME_WITH_SYS_TIME
-
-/* Define if your <sys/time.h> declares struct tm.  */
-#undef TM_IN_SYS_TIME
-
-#undef HAVE_STRUCT_SOCKADDR_LL
-
-/* The number of bytes in a unsigned int.  */
-#undef SIZEOF_UNSIGNED_INT
-
-/* The number of bytes in a unsigned long.  */
-#undef SIZEOF_UNSIGNED_LONG
-
-/* The number of bytes in a unsigned short.  */
-#undef SIZEOF_UNSIGNED_SHORT
-
-/* Define if you have the select function.  */
-#undef HAVE_SELECT
-
-/* Define if you have the socket function.  */
-#undef HAVE_SOCKET
-
-/* Define if you have the strerror function.  */
-#undef HAVE_STRERROR
-
-/* Define if you have the strtol function.  */
-#undef HAVE_STRTOL
-
-/* Define if you have the <asm/types.h> header file.  */
-#undef HAVE_ASM_TYPES_H
-
-/* Define if you have the <fcntl.h> header file.  */
-#undef HAVE_FCNTL_H
-
-/* Define if you have the <getopt.h> header file.  */
-#undef HAVE_GETOPT_H
-
-/* Define if you have the <linux/if_ether.h> header file.  */
-#undef HAVE_LINUX_IF_ETHER_H
-
-/* Define if you have kernel-mode PPPoE in Linux file.  */
-#undef HAVE_LINUX_KERNEL_PPPOE
-
-/* Define if you have the <linux/if_packet.h> header file.  */
-#undef HAVE_LINUX_IF_PACKET_H
-
-/* Define if you have the <linux/if_pppox.h> header file.  */
-#undef HAVE_LINUX_IF_PPPOX_H
-
-/* Define if you have the <net/bpf.h> header file.  */
-#undef HAVE_NET_BPF_H
-
-/* Define if you have the <net/if_arp.h> header file.  */
-#undef HAVE_NET_IF_ARP_H
-
-/* Define if you have the <net/ethernet.h> header file.  */
-#undef HAVE_NET_ETHERNET_H
-
-/* Define if you have the <net/if.h> header file.  */
-#undef HAVE_NET_IF_H
-
-/* Define if you have the <linux/if.h> header file.  */
-#undef HAVE_LINUX_IF_H
-
-/* Define if you have the <net/if_dl.h> header file.  */
-#undef HAVE_NET_IF_DL_H
-
-/* Define if you have the <net/if_ether.h> header file.  */
-#undef HAVE_NET_IF_ETHER_H
-
-/* Define if you have the <net/if_types.h> header file.  */
-#undef HAVE_NET_IF_TYPES_H
-
-/* Define if you have the <netinet/if_ether.h> header file.  */
-#undef HAVE_NETINET_IF_ETHER_H
-
-/* Define if you have the <netpacket/packet.h> header file.  */
-#undef HAVE_NETPACKET_PACKET_H
-
-/* Define if you have the <sys/cdefs.h> header file.  */
-#undef HAVE_SYS_CDEFS_H
-
-/* Define if you have the <sys/dlpi.h> header file.  */
-#undef HAVE_SYS_DLPI_H
-
-/* Define if you have the <sys/ioctl.h> header file.  */
-#undef HAVE_SYS_IOCTL_H
-
-/* Define if you have the <sys/param.h> header file.  */
-#undef HAVE_SYS_PARAM_H
-
-/* Define if you have the <sys/socket.h> header file.  */
-#undef HAVE_SYS_SOCKET_H
-
-/* Define if you have the <sys/time.h> header file.  */
-#undef HAVE_SYS_TIME_H
-
-/* Define if you have the <sys/uio.h> header file.  */
-#undef HAVE_SYS_UIO_H
-
-/* Define if you have the <syslog.h> header file.  */
-#undef HAVE_SYSLOG_H
-
-/* Define if you have the <unistd.h> header file.  */
-#undef HAVE_UNISTD_H
-
-/* Define if you have the N_HDLC line discipline in linux/termios.h */
-#undef HAVE_N_HDLC
-
-/* Define if bitfields are packed in reverse order */
-#undef PACK_BITFIELDS_REVERSED
diff --git a/mdk-stage1/rp-pppoe/src/configure b/mdk-stage1/rp-pppoe/src/configure
deleted file mode 100755
index eede451a1..000000000
--- a/mdk-stage1/rp-pppoe/src/configure
+++ /dev/null
@@ -1,2356 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_default_prefix=/usr
-ac_help="$ac_help
-  --enable-plugin=pppd_src_path   build pppd plugin"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.13"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=pppoe.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  echo "loading cache $cache_file"
-  . $cache_file
-else
-  echo "creating cache $cache_file"
-  > $cache_file
-fi
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:536: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:566: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_prog_rejected=no
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  if test -z "$CC"; then
-    case "`uname -s`" in
-    *win32* | *WIN32*)
-      # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:617: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="cl"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
- ;;
-    esac
-  fi
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:649: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 660 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:691: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:696: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:705: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-else
-  GCC=
-fi
-
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:724: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_cc_g=yes
-else
-  ac_cv_prog_cc_g=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-
-
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:758: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 773 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:779: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 790 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:796: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -nologo -E"
-  cat > conftest.$ac_ext <<EOF
-#line 807 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
-fi
-  CPP="$ac_cv_prog_CPP"
-else
-  ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:838: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 843 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:851: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  ac_cv_header_stdc=yes
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 868 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "memchr" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 886 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "free" >/dev/null 2>&1; then
-  :
-else
-  rm -rf conftest*
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
-  :
-else
-  cat > conftest.$ac_ext <<EOF
-#line 907 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  :
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_header_stdc=no
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
-  cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:942: checking for sys/wait.h that is POSIX.1 compatible" >&5
-if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 947 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/wait.h>
-#ifndef WEXITSTATUS
-#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
-#endif
-#ifndef WIFEXITED
-#define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
-#endif
-int main() {
-int s;
-wait (&s);
-s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
-; return 0; }
-EOF
-if { (eval echo configure:963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_header_sys_wait_h=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_sys_wait_h=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6
-if test $ac_cv_header_sys_wait_h = yes; then
-  cat >> confdefs.h <<\EOF
-#define HAVE_SYS_WAIT_H 1
-EOF
-
-fi
-
-for ac_hdr in fcntl.h sys/ioctl.h sys/time.h syslog.h unistd.h net/if_arp.h netinet/if_ether.h getopt.h sys/uio.h sys/param.h fcntl.h net/bpf.h netpacket/packet.h net/ethernet.h asm/types.h linux/if_packet.h linux/if_ether.h linux/if_pppox.h sys/socket.h sys/cdefs.h linux/if.h net/if.h net/if_dl.h net/if_ether.h net/if_types.h netinet/if_ether.h net/if_types.h net/if_dl.h sys/dlpi.h 
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:987: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 992 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:997: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1025: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1030 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this.  */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this.  */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this.  */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
-   It does not let you subtract one const X* pointer from another in an arm
-   of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this.  */
-  char *t;
-  char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-  *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-  int x[] = {25, 17};
-  const int *foo = &x[0];
-  ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-  typedef const int *iptr;
-  iptr p = 0;
-  ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
-     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-  struct s { int j; const int *ap[3]; };
-  struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-  const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1079: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_c_const=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
-  cat >> confdefs.h <<\EOF
-#define const 
-EOF
-
-fi
-
-echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1100: checking for pid_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1105 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_type_pid_t=yes
-else
-  rm -rf conftest*
-  ac_cv_type_pid_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_pid_t" 1>&6
-if test $ac_cv_type_pid_t = no; then
-  cat >> confdefs.h <<\EOF
-#define pid_t int
-EOF
-
-fi
-
-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1133: checking whether time.h and sys/time.h may both be included" >&5
-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1138 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-int main() {
-struct tm *tp;
-; return 0; }
-EOF
-if { (eval echo configure:1147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_header_time=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_header_time=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_time" 1>&6
-if test $ac_cv_header_time = yes; then
-  cat >> confdefs.h <<\EOF
-#define TIME_WITH_SYS_TIME 1
-EOF
-
-fi
-
-echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:1168: checking whether struct tm is in sys/time.h or time.h" >&5
-if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1173 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <time.h>
-int main() {
-struct tm *tp; tp->tm_sec;
-; return 0; }
-EOF
-if { (eval echo configure:1181: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_struct_tm=time.h
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_struct_tm=sys/time.h
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_struct_tm" 1>&6
-if test $ac_cv_struct_tm = sys/time.h; then
-  cat >> confdefs.h <<\EOF
-#define TM_IN_SYS_TIME 1
-EOF
-
-fi
-
-
-# Extract the first word of "echo", so it can be a program name with args.
-set dummy echo; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1205: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_ECHO'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$ECHO" in
-  /*)
-  ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_ECHO="$ECHO" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/ucb/bin:$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_ECHO="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_ECHO" && ac_cv_path_ECHO=""""
-  ;;
-esac
-fi
-ECHO="$ac_cv_path_ECHO"
-if test -n "$ECHO"; then
-  echo "$ac_t""$ECHO" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-$ECHO -n "checking for struct sockaddr_ll... "
-cat > conftest.$ac_ext <<EOF
-#line 1241 "configure"
-#include "confdefs.h"
-#include <asm/types.h>
-#include <linux/if_packet.h>
-#include <linux/if_ether.h>
-
-int main() {
-struct sockaddr_ll sa;
-; return 0; }
-EOF
-if { (eval echo configure:1251: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_struct_sockaddr_ll=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_struct_sockaddr_ll=no
-fi
-rm -f conftest*
-$ECHO $ac_cv_struct_sockaddr_ll
-if test "$ac_cv_struct_sockaddr_ll" = yes ; then
-cat >> confdefs.h <<\EOF
-#define HAVE_STRUCT_SOCKADDR_LL 1
-EOF
-
-fi
-
-$ECHO -n "checking for N_HDLC line discipline... "
-cat > conftest.$ac_ext <<EOF
-#line 1271 "configure"
-#include "confdefs.h"
-#include <linux/termios.h>
-int main() {
-int x = N_HDLC;
-; return 0; }
-EOF
-if { (eval echo configure:1278: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_n_hdlc=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_n_hdlc=no
-fi
-rm -f conftest*
-$ECHO $ac_cv_n_hdlc
-if test "$ac_cv_n_hdlc" = yes ; then
-cat >> confdefs.h <<\EOF
-#define HAVE_N_HDLC 1
-EOF
-
-fi
-
-# Check whether --enable-plugin or --disable-plugin was given.
-if test "${enable_plugin+set}" = set; then
-  enableval="$enable_plugin"
-  ac_cv_pluginpath=$enableval
-else
-  ac_cv_pluginpath=no
-fi
-
-
-LINUX_KERNELMODE_PLUGIN=""
-PPPD_INCDIR=""
-if test "$ac_cv_header_linux_if_pppox_h" = yes ; then
-	if test "$ac_cv_pluginpath" != no ; then
-		LINUX_KERNELMODE_PLUGIN=rp-pppoe.so
-		PPPD_INCDIR=$ac_cv_pluginpath
-	fi
-fi
-
-
-
-
-PPPOE_RELAY=""
-if test "`uname -s`" = "Linux" ; then
-	PPPOE_RELAY=pppoe-relay
-fi
-
-
-echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
-echo "configure:1324: checking for 8-bit clean memcmp" >&5
-if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_func_memcmp_clean=no
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1332 "configure"
-#include "confdefs.h"
-
-main()
-{
-  char c0 = 0x40, c1 = 0x80, c2 = 0x81;
-  exit(memcmp(&c0, &c2, 1) < 0 && memcmp(&c1, &c2, 1) < 0 ? 0 : 1);
-}
-
-EOF
-if { (eval echo configure:1342: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_func_memcmp_clean=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_func_memcmp_clean=no
-fi
-rm -fr conftest*
-fi
-
-fi
-
-echo "$ac_t""$ac_cv_func_memcmp_clean" 1>&6
-test $ac_cv_func_memcmp_clean = no && LIBOBJS="$LIBOBJS memcmp.${ac_objext}"
-
-echo $ac_n "checking whether setvbuf arguments are reversed""... $ac_c" 1>&6
-echo "configure:1360: checking whether setvbuf arguments are reversed" >&5
-if eval "test \"`echo '$''{'ac_cv_func_setvbuf_reversed'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1368 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-/* If setvbuf has the reversed format, exit 0. */
-main () {
-  /* This call has the arguments reversed.
-     A reversed system may check and see that the address of main
-     is not _IOLBF, _IONBF, or _IOFBF, and return nonzero.  */
-  if (setvbuf(stdout, _IOLBF, (char *) main, BUFSIZ) != 0)
-    exit(1);
-  putc('\r', stdout);
-  exit(0);			/* Non-reversed systems segv here.  */
-}
-EOF
-if { (eval echo configure:1382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_func_setvbuf_reversed=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_func_setvbuf_reversed=no
-fi
-rm -fr conftest*
-fi
-
-rm -f core core.* *.core
-fi
-
-echo "$ac_t""$ac_cv_func_setvbuf_reversed" 1>&6
-if test $ac_cv_func_setvbuf_reversed = yes; then
-  cat >> confdefs.h <<\EOF
-#define SETVBUF_REVERSED 1
-EOF
-
-fi
-
-echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1406: checking return type of signal handlers" >&5
-if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1411 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <signal.h>
-#ifdef signal
-#undef signal
-#endif
-#ifdef __cplusplus
-extern "C" void (*signal (int, void (*)(int)))(int);
-#else
-void (*signal ()) ();
-#endif
-
-int main() {
-int i;
-; return 0; }
-EOF
-if { (eval echo configure:1428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_type_signal=void
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_type_signal=int
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_type_signal" 1>&6
-cat >> confdefs.h <<EOF
-#define RETSIGTYPE $ac_cv_type_signal
-EOF
-
-
-for ac_func in select socket strerror strtol
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1449: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1454 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func(); below.  */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error.  */
-/* We use char because int might match the return type of a gcc2
-    builtin and then its argument prototype would still apply.  */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:1477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=yes"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
-  cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
- 
-else
-  echo "$ac_t""no" 1>&6
-fi
-done
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1532: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-echo $ac_n "checking size of unsigned short""... $ac_c" 1>&6
-echo "configure:1586: checking size of unsigned short" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_short'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1594 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
-  FILE *f=fopen("conftestval", "w");
-  if (!f) exit(1);
-  fprintf(f, "%d\n", sizeof(unsigned short));
-  exit(0);
-}
-EOF
-if { (eval echo configure:1605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_sizeof_unsigned_short=`cat conftestval`
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_sizeof_unsigned_short=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_short" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_SHORT $ac_cv_sizeof_unsigned_short
-EOF
-
-
-echo $ac_n "checking size of unsigned int""... $ac_c" 1>&6
-echo "configure:1625: checking size of unsigned int" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_int'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1633 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
-  FILE *f=fopen("conftestval", "w");
-  if (!f) exit(1);
-  fprintf(f, "%d\n", sizeof(unsigned int));
-  exit(0);
-}
-EOF
-if { (eval echo configure:1644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_sizeof_unsigned_int=`cat conftestval`
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_sizeof_unsigned_int=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_int" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_INT $ac_cv_sizeof_unsigned_int
-EOF
-
-
-echo $ac_n "checking size of unsigned long""... $ac_c" 1>&6
-echo "configure:1664: checking size of unsigned long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_unsigned_long'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1672 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
-{
-  FILE *f=fopen("conftestval", "w");
-  if (!f) exit(1);
-  fprintf(f, "%d\n", sizeof(unsigned long));
-  exit(0);
-}
-EOF
-if { (eval echo configure:1683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_sizeof_unsigned_long=`cat conftestval`
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_sizeof_unsigned_long=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_unsigned_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
-EOF
-
-
-
-# Extract the first word of "pppd", so it can be a program name with args.
-set dummy pppd; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1706: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_PPPD'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$PPPD" in
-  /*)
-  ac_cv_path_PPPD="$PPPD" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_PPPD="$PPPD" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_PPPD="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_PPPD" && ac_cv_path_PPPD="NOTFOUND"
-  ;;
-esac
-fi
-PPPD="$ac_cv_path_PPPD"
-if test -n "$PPPD"; then
-  echo "$ac_t""$PPPD" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-# Extract the first word of "setsid", so it can be a program name with args.
-set dummy setsid; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1743: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_SETSID'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$SETSID" in
-  /*)
-  ac_cv_path_SETSID="$SETSID" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_SETSID="$SETSID" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH:/sbin:/usr/sbin:/usr/local/sbin"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_SETSID="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_SETSID" && ac_cv_path_SETSID=""""
-  ;;
-esac
-fi
-SETSID="$ac_cv_path_SETSID"
-if test -n "$SETSID"; then
-  echo "$ac_t""$SETSID" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-# Extract the first word of "id", so it can be a program name with args.
-set dummy id; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1780: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_ID'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  case "$ID" in
-  /*)
-  ac_cv_path_ID="$ID" # Let the user override the test with a path.
-  ;;
-  ?:/*)			 
-  ac_cv_path_ID="$ID" # Let the user override the test with a dos path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="/usr/xpg4/bin:$PATH"
-  for ac_dir in $ac_dummy; do 
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_path_ID="$ac_dir/$ac_word"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_ID" && ac_cv_path_ID=""""
-  ;;
-esac
-fi
-ID="$ac_cv_path_ID"
-if test -n "$ID"; then
-  echo "$ac_t""$ID" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-$ECHO -n "checking for Linux 2.4.X kernel-mode PPPoE support..."
-if test "`uname -s`" = "Linux" ; then
-if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1820 "configure"
-#include "confdefs.h"
-#include <sys/socket.h>
-#include <net/ethernet.h>
-#include <linux/if.h>
-#include <linux/if_pppox.h>
-int main()
-{
-	if (socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OE) >= 0) return 0; else return 1;
-}
-
-EOF
-if { (eval echo configure:1832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  ac_cv_linux_kernel_pppoe=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  ac_cv_linux_kernel_pppoe=no
-fi
-rm -fr conftest*
-fi
-
-else
-	ac_cv_linux_kernel_pppoe=no
-fi
-
-$ECHO $ac_cv_linux_kernel_pppoe
-if test "$ac_cv_linux_kernel_pppoe" = yes ; then
-    cat >> confdefs.h <<\EOF
-#define HAVE_LINUX_KERNEL_PPPOE 1
-EOF
-
-fi
-
-if test "$GCC" = yes; then
-	CFLAGS="$CFLAGS -Wall -Wstrict-prototypes -ansi -pedantic"
-fi
-
-if test "$PPPD" = "NOTFOUND"; then
-	$ECHO ""
-	$ECHO "*** Oops!  I couldn't find pppd, the PPP daemon anywhere."
-	$ECHO "*** You must install pppd, version 2.3.10 or later."
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-fi
-
-
-PPPD_VERSION=`$PPPD --version 2>&1 | awk '{print $NF}'`
-
-case "$PPPD_VERSION" in
-1.*|2.0.*|2.1.*|2.2.*|2.3.0|2.3.1|2.3.2|2.3.3|2.3.4|2.3.5|2.3.6)
-	$ECHO ""
-	$ECHO "*** Oops! Your version of pppd is $PPPD_VERSION, which is too old."
-	$ECHO "*** You need at least 2.3.7 (2.3.10 or newer recommended.)"
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-	;;
-
-2.3.7|2.3.8|2.3.9)
-	$ECHO ""
-	$ECHO "*** Warning.  Your version of pppd is $PPPD_VERSION.  You will"
-	$ECHO "*** not be able to use connect-on-demand.  Upgrade to pppd"
-	$ECHO "*** 2.3.10 or newer if you need connect-on-demand."
-	$ECHO ""
-	;;
-
-2*|3*|4*|5*|6*|7*|8*|9*)
-	;;
-
-*)
-	$ECHO ""
-	$ECHO "*** Oops.  I cannot figure out what version of pppd you have."
-	$ECHO "*** All I got back was '$PPPD_VERSION'"
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-	;;
-esac
-
-$ECHO -n "checking packing order of bit fields... "
-if test "$cross_compiling" = yes; then
-    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1905 "configure"
-#include "confdefs.h"
-
-union foo {
-    struct bar {
-	unsigned int ver:4;
-	unsigned int type:4;
-    } bb;
-    unsigned char baz;
-};
-
-int
-main(void)
-{
-    union foo x;
-    x.bb.ver = 1;
-    x.bb.type = 2;
-    if (x.baz == 0x21) {
-	return 1;
-    } else if (x.baz == 0x12) {
-	return 0;
-    } else {
-	return 2;
-    }
-}
-EOF
-if { (eval echo configure:1931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
-  PACK=normal
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  PACK=rev
-fi
-rm -fr conftest*
-fi
-
-
-if test "$PACK" = "rev" ; then
-	$ECHO "reversed"
-	cat >> confdefs.h <<\EOF
-#define PACK_BITFIELDS_REVERSED 1
-EOF
-
-else
-	$ECHO "normal"
-fi
-
-# Sigh... got to fix this up for tcl
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Fully resolve WRAPPER for Tcl script.
-WRAPPER=${sbindir}/pppoe-wrapper
-eval "WRAPPER=${WRAPPER}"
-eval "WRAPPER=${WRAPPER}"
-
-
-# Determine what targets to build
-TARGETS="pppoe pppoe-server"
-
-# pppoe-sniff is built only on Linux and Solaris
-if test "$ac_cv_header_linux_if_packet_h" = "yes" -o "$ac_cv_header_sys_dlpi_h" = "yes" ; then
-	TARGETS="$TARGETS pppoe-sniff"
-fi
-
-# pppoe-relay is built only on Linux
-if test "$ac_cv_header_linux_if_packet_h" = "yes" ; then
-	TARGETS="$TARGETS pppoe-relay"
-fi
-
-# plugin is built only if we have kernel support
-if test -n "$LINUX_KERNELMODE_PLUGIN" ; then
-	TARGETS="$TARGETS $LINUX_KERNELMODE_PLUGIN"
-fi
-
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
-  *ac_space=\ *)
-    # `set' does not quote correctly, so add quotes (double-quote substitution
-    # turns \\\\ into \\, and sed turns \\ into \).
-    sed -n \
-      -e "s/'/'\\\\''/g" \
-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
-    ;;
-  *)
-    # `set' quotes correctly as required by POSIX, so do not add quotes.
-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
-    ;;
-  esac >> confcache
-if cmp -s $cache_file confcache; then
-  :
-else
-  if test -w $cache_file; then
-    echo "updating cache $cache_file"
-    cat confcache > $cache_file
-  else
-    echo "not updating unwritable cache $cache_file"
-  fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.13"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@CC@%$CC%g
-s%@CPP@%$CPP%g
-s%@ECHO@%$ECHO%g
-s%@LINUX_KERNELMODE_PLUGIN@%$LINUX_KERNELMODE_PLUGIN%g
-s%@PPPD_INCDIR@%$PPPD_INCDIR%g
-s%@PPPOE_RELAY@%$PPPOE_RELAY%g
-s%@LIBOBJS@%$LIBOBJS%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PPPD@%$PPPD%g
-s%@SETSID@%$SETSID%g
-s%@ID@%$ID%g
-s%@WRAPPER@%$WRAPPER%g
-s%@TARGETS@%$TARGETS%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='\([ 	]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="config.h"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  echo creating $ac_file
-
-  rm -f conftest.frag conftest.in conftest.out
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h.  And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
-  ac_lines=`grep -c . conftest.vals`
-  # grep -c gives empty output for an empty file on some AIX systems.
-  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-  # Write a limited-size here document to conftest.frag.
-  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-  echo 'CEOF
-  sed -f conftest.frag conftest.in > conftest.out
-  rm -f conftest.in
-  mv conftest.out conftest.in
-' >> $CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-  rm -f conftest.vals
-  mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
-  rm -f conftest.frag conftest.h
-  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
-  cat conftest.in >> conftest.h
-  rm -f conftest.in
-  if cmp -s $ac_file conftest.h 2>/dev/null; then
-    echo "$ac_file is unchanged"
-    rm -f conftest.h
-  else
-    # Remove last slash and all that follows it.  Not all systems have dirname.
-      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-      # The file is in a subdirectory.
-      test ! -d "$ac_dir" && mkdir "$ac_dir"
-    fi
-    rm -f $ac_file
-    mv conftest.h $ac_file
-  fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-
-
-$ECHO ""
-$ECHO "On this platform, the following targets will be built:"
-$ECHO "        $TARGETS"
-$ECHO ""
-$ECHO "Type 'make' to compile the software."
diff --git a/mdk-stage1/rp-pppoe/src/configure.in b/mdk-stage1/rp-pppoe/src/configure.in
deleted file mode 100644
index c11690179..000000000
--- a/mdk-stage1/rp-pppoe/src/configure.in
+++ /dev/null
@@ -1,231 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-AC_INIT(pppoe.c)
-
-AC_CONFIG_HEADER(config.h)
-
-AC_PREFIX_DEFAULT(/usr)
-
-dnl Checks for programs.
-AC_PROG_CC
-
-dnl Checks for libraries.
-
-dnl Checks for header files.
-AC_HEADER_STDC
-AC_HEADER_SYS_WAIT
-AC_CHECK_HEADERS(fcntl.h sys/ioctl.h sys/time.h syslog.h unistd.h net/if_arp.h netinet/if_ether.h getopt.h sys/uio.h sys/param.h fcntl.h net/bpf.h netpacket/packet.h net/ethernet.h asm/types.h linux/if_packet.h linux/if_ether.h linux/if_pppox.h sys/socket.h sys/cdefs.h linux/if.h net/if.h net/if_dl.h net/if_ether.h net/if_types.h netinet/if_ether.h net/if_types.h net/if_dl.h sys/dlpi.h )
-
-dnl Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_TYPE_PID_T
-AC_HEADER_TIME
-AC_STRUCT_TM
-
-dnl Check for an echo which supports -n -- another hack for Solaris
-AC_PATH_PROG(ECHO, echo, "", /usr/ucb/bin:$PATH)
-
-dnl Check for sockaddr_ll
-$ECHO -n "checking for struct sockaddr_ll... "
-AC_TRY_COMPILE([#include <asm/types.h>
-#include <linux/if_packet.h>
-#include <linux/if_ether.h>
-], [struct sockaddr_ll sa;],
-ac_cv_struct_sockaddr_ll=yes, ac_cv_struct_sockaddr_ll=no)
-$ECHO $ac_cv_struct_sockaddr_ll
-if test "$ac_cv_struct_sockaddr_ll" = yes ; then
-AC_DEFINE(HAVE_STRUCT_SOCKADDR_LL)
-fi
-
-dnl Check for N_HDLC line discipline
-$ECHO -n "checking for N_HDLC line discipline... "
-AC_TRY_COMPILE([#include <linux/termios.h>],
-	[int x = N_HDLC;],
-	ac_cv_n_hdlc=yes, ac_cv_n_hdlc=no)
-$ECHO $ac_cv_n_hdlc
-if test "$ac_cv_n_hdlc" = yes ; then
-AC_DEFINE(HAVE_N_HDLC)
-fi
-
-AC_ARG_ENABLE(plugin, [  --enable-plugin=pppd_src_path   build pppd plugin], ac_cv_pluginpath=$enableval, ac_cv_pluginpath=no)
-
-dnl Determine whether or not to build Linux pppd plugin
-LINUX_KERNELMODE_PLUGIN=""
-PPPD_INCDIR=""
-if test "$ac_cv_header_linux_if_pppox_h" = yes ; then
-	if test "$ac_cv_pluginpath" != no ; then
-		LINUX_KERNELMODE_PLUGIN=rp-pppoe.so
-		PPPD_INCDIR=$ac_cv_pluginpath
-	fi
-fi
-
-AC_SUBST(LINUX_KERNELMODE_PLUGIN)
-AC_SUBST(PPPD_INCDIR)
-
-dnl Determine whether or not to build PPPoE relay
-PPPOE_RELAY=""
-if test "`uname -s`" = "Linux" ; then
-	PPPOE_RELAY=pppoe-relay
-fi
-AC_SUBST(PPPOE_RELAY)
-
-dnl Checks for library functions.
-AC_FUNC_MEMCMP
-AC_FUNC_SETVBUF_REVERSED
-AC_TYPE_SIGNAL
-AC_CHECK_FUNCS(select socket strerror strtol)
-AC_PROG_INSTALL
-
-dnl Integer sizes
-AC_CHECK_SIZEOF(unsigned short)
-AC_CHECK_SIZEOF(unsigned int)
-AC_CHECK_SIZEOF(unsigned long)
-
-dnl Check for location of pppd
-AC_PATH_PROG(PPPD, pppd, NOTFOUND, $PATH:/sbin:/usr/sbin:/usr/local/sbin)
-
-dnl Check for setsid (probably Linux-specific)
-AC_PATH_PROG(SETSID, setsid, "", $PATH:/sbin:/usr/sbin:/usr/local/sbin)
-
-dnl Check for an "id" which accepts "-u" option -- hack for Solaris.
-AC_PATH_PROG(ID, id, "", /usr/xpg4/bin:$PATH)
-
-dnl Check for Linux-specific kernel support for PPPoE
-$ECHO -n "checking for Linux 2.4.X kernel-mode PPPoE support..."
-if test "`uname -s`" = "Linux" ; then
-AC_TRY_RUN([#include <sys/socket.h>
-#include <net/ethernet.h>
-#include <linux/if.h>
-#include <linux/if_pppox.h>
-int main()
-{
-	if (socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OE) >= 0) return 0; else return 1;
-}
-], ac_cv_linux_kernel_pppoe=yes, ac_cv_linux_kernel_pppoe=no)
-else
-	ac_cv_linux_kernel_pppoe=no
-fi
-
-$ECHO $ac_cv_linux_kernel_pppoe
-if test "$ac_cv_linux_kernel_pppoe" = yes ; then
-    AC_DEFINE(HAVE_LINUX_KERNEL_PPPOE)
-fi
-
-dnl GCC warning level
-if test "$GCC" = yes; then
-	CFLAGS="$CFLAGS -Wall -Wstrict-prototypes"
-fi
-
-dnl If we couldn't find pppd, die
-if test "$PPPD" = "NOTFOUND"; then
-	$ECHO ""
-	$ECHO "*** Oops!  I couldn't find pppd, the PPP daemon anywhere."
-	$ECHO "*** You must install pppd, version 2.3.10 or later."
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-fi
-
-dnl Figure out pppd version.  2.3.7 to 2.3.9 -- issue warning.  Less than
-dnl 2.3.7 -- stop
-
-PPPD_VERSION=`$PPPD --version 2>&1 | awk '{print $NF}'`
-
-case "$PPPD_VERSION" in
-1.*|2.0.*|2.1.*|2.2.*|2.3.0|2.3.1|2.3.2|2.3.3|2.3.4|2.3.5|2.3.6)
-	$ECHO ""
-	$ECHO "*** Oops! Your version of pppd is $PPPD_VERSION, which is too old."
-	$ECHO "*** You need at least 2.3.7 (2.3.10 or newer recommended.)"
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-	;;
-
-2.3.7|2.3.8|2.3.9)
-	$ECHO ""
-	$ECHO "*** Warning.  Your version of pppd is $PPPD_VERSION.  You will"
-	$ECHO "*** not be able to use connect-on-demand.  Upgrade to pppd"
-	$ECHO "*** 2.3.10 or newer if you need connect-on-demand."
-	$ECHO ""
-	;;
-
-2*|3*|4*|5*|6*|7*|8*|9*)
-	;;
-
-*)
-	$ECHO ""
-	$ECHO "*** Oops.  I cannot figure out what version of pppd you have."
-	$ECHO "*** All I got back was '$PPPD_VERSION'"
-	$ECHO "*** I will keep going, but it may not work."
-	$ECHO ""
-	;;
-esac
-
-dnl Figure out packing order of structures
-$ECHO -n "checking packing order of bit fields... "
-AC_TRY_RUN([
-union foo {
-    struct bar {
-	unsigned int ver:4;
-	unsigned int type:4;
-    } bb;
-    unsigned char baz;
-};
-
-int
-main(void)
-{
-    union foo x;
-    x.bb.ver = 1;
-    x.bb.type = 2;
-    if (x.baz == 0x21) {
-	return 1;
-    } else if (x.baz == 0x12) {
-	return 0;
-    } else {
-	return 2;
-    }
-}], PACK=normal, PACK=rev)
-
-if test "$PACK" = "rev" ; then
-	$ECHO "reversed"
-	AC_DEFINE(PACK_BITFIELDS_REVERSED)
-else
-	$ECHO "normal"
-fi
-
-# Sigh... got to fix this up for tcl
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Fully resolve WRAPPER for Tcl script.
-WRAPPER=${sbindir}/pppoe-wrapper
-eval "WRAPPER=${WRAPPER}"
-eval "WRAPPER=${WRAPPER}"
-AC_SUBST(WRAPPER)
-
-# Determine what targets to build
-TARGETS="pppoe pppoe-server"
-
-# pppoe-sniff is built only on Linux and Solaris
-if test "$ac_cv_header_linux_if_packet_h" = "yes" -o "$ac_cv_header_sys_dlpi_h" = "yes" ; then
-	TARGETS="$TARGETS pppoe-sniff"
-fi
-
-# pppoe-relay is built only on Linux
-if test "$ac_cv_header_linux_if_packet_h" = "yes" ; then
-	TARGETS="$TARGETS pppoe-relay"
-fi
-
-# plugin is built only if we have kernel support
-if test -n "$LINUX_KERNELMODE_PLUGIN" ; then
-	TARGETS="$TARGETS $LINUX_KERNELMODE_PLUGIN"
-fi
-
-AC_SUBST(TARGETS)
-
-AC_OUTPUT(Makefile ../scripts/adsl-connect ../scripts/adsl-start ../scripts/adsl-stop ../scripts/adsl-init ../scripts/adsl-init-suse ../scripts/adsl-init-turbolinux ../scripts/adsl-setup ../gui/Makefile ../gui/tkpppoe)
-
-$ECHO ""
-$ECHO "On this platform, the following targets will be built:"
-$ECHO "        $TARGETS"
-$ECHO ""
-$ECHO "Type 'make' to compile the software."
diff --git a/mdk-stage1/rp-pppoe/src/debug.c b/mdk-stage1/rp-pppoe/src/debug.c
deleted file mode 100644
index 052dca6c7..000000000
--- a/mdk-stage1/rp-pppoe/src/debug.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/***********************************************************************
-*
-* debug.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for printing debugging information
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-#include <sys/time.h>
-#include <time.h>
-#include <unistd.h>
-#include <ctype.h>
-
-/**********************************************************************
-*%FUNCTION: dumpHex
-*%ARGUMENTS:
-* fp -- file to dump to
-* buf -- buffer to dump
-* len -- length of data
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Dumps buffer to fp in an easy-to-read format
-***********************************************************************/
-void
-dumpHex(FILE *fp, unsigned char const *buf, int len)
-{
-    int i;
-    int base;
-
-    if (!fp) return;
-
-    /* do NOT dump PAP packets */
-    if (len >= 2 && buf[0] == 0xC0 && buf[1] == 0x23) {
-	fprintf(fp, "(PAP Authentication Frame -- Contents not dumped)\n");
-	return;
-    }
-
-    for (base=0; base<len; base += 16) {
-	for (i=base; i<base+16; i++) {
-	    if (i < len) {
-		fprintf(fp, "%02x ", (unsigned) buf[i]);
-	    } else {
-		fprintf(fp, "   ");
-	    }
-	}
-	fprintf(fp, "  ");
-	for (i=base; i<base+16; i++) {
-	    if (i < len) {
-		if (isprint(buf[i])) {
-		    fprintf(fp, "%c", buf[i]);
-		} else {
-		    fprintf(fp, ".");
-		}
-	    } else {
-		break;
-	    }
-	}
-	fprintf(fp, "\n");
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: dumpPacket
-*%ARGUMENTS:
-* fp -- file to dump to
-* packet -- a PPPoE packet
-* dir -- either SENT or RCVD
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Dumps the PPPoE packet to fp in an easy-to-read format
-***********************************************************************/
-void
-dumpPacket(FILE *fp, PPPoEPacket *packet, char const *dir)
-{
-    int len = ntohs(packet->length);
-
-    /* Sheesh... printing times is a pain... */
-    struct timeval tv;
-    time_t now;
-    int millisec;
-    struct tm *lt;
-    char timebuf[256];
-
-    UINT16_t type = etherType(packet);
-    if (!fp) return;
-    gettimeofday(&tv, NULL);
-    now = (time_t) tv.tv_sec;
-    millisec = tv.tv_usec / 1000;
-    lt = localtime(&now);
-    strftime(timebuf, 256, "%H:%M:%S", lt);
-    fprintf(fp, "%s.%03d %s PPPoE ", timebuf, millisec, dir);
-    if (type == Eth_PPPOE_Discovery) {
-	fprintf(fp, "Discovery (%x) ", (unsigned) type);
-    } else if (type == Eth_PPPOE_Session) {
-	fprintf(fp, "Session (%x) ", (unsigned) type);
-    } else {
-	fprintf(fp, "Unknown (%x) ", (unsigned) type);
-    }
-
-    switch(packet->code) {
-    case CODE_PADI: fprintf(fp, "PADI "); break;
-    case CODE_PADO: fprintf(fp, "PADO "); break;
-    case CODE_PADR: fprintf(fp, "PADR "); break;
-    case CODE_PADS: fprintf(fp, "PADS "); break;
-    case CODE_PADT: fprintf(fp, "PADT "); break;
-    case CODE_SESS: fprintf(fp, "SESS "); break;
-    }
-
-    fprintf(fp, "sess-id %d length %d\n",
-	    (int) ntohs(packet->session),
-	    len);
-
-    /* Ugly... I apologize... */
-    fprintf(fp,
-	    "SourceAddr %02x:%02x:%02x:%02x:%02x:%02x "
-	    "DestAddr %02x:%02x:%02x:%02x:%02x:%02x\n",
-	    (unsigned) packet->ethHdr.h_source[0],
-	    (unsigned) packet->ethHdr.h_source[1],
-	    (unsigned) packet->ethHdr.h_source[2],
-	    (unsigned) packet->ethHdr.h_source[3],
-	    (unsigned) packet->ethHdr.h_source[4],
-	    (unsigned) packet->ethHdr.h_source[5],
-	    (unsigned) packet->ethHdr.h_dest[0],
-	    (unsigned) packet->ethHdr.h_dest[1],
-	    (unsigned) packet->ethHdr.h_dest[2],
-	    (unsigned) packet->ethHdr.h_dest[3],
-	    (unsigned) packet->ethHdr.h_dest[4],
-	    (unsigned) packet->ethHdr.h_dest[5]);
-    dumpHex(fp, packet->payload, ntohs(packet->length));
-}
diff --git a/mdk-stage1/rp-pppoe/src/discovery.c b/mdk-stage1/rp-pppoe/src/discovery.c
deleted file mode 100644
index fc3568db5..000000000
--- a/mdk-stage1/rp-pppoe/src/discovery.c
+++ /dev/null
@@ -1,629 +0,0 @@
-/***********************************************************************
-*
-* discovery.c
-*
-* Perform PPPoE discovery
-*
-* Copyright (C) 1999 by Roaring Penguin Software Inc.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef USE_LINUX_PACKET
-#include <sys/ioctl.h>
-#include <fcntl.h>
-#endif
-
-#include <signal.h>
-
-/**********************************************************************
-*%FUNCTION: parseForHostUniq
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data.
-* extra -- user-supplied pointer.  This is assumed to be a pointer to int.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* If a HostUnique tag is found which matches our PID, sets *extra to 1.
-***********************************************************************/
-void
-parseForHostUniq(UINT16_t type, UINT16_t len, unsigned char *data,
-		 void *extra)
-{
-    int *val = (int *) extra;
-    if (type == TAG_HOST_UNIQ && len == sizeof(pid_t)) {
-	pid_t tmp;
-	memcpy(&tmp, data, len);
-	if (tmp == getpid()) {
-	    *val = 1;
-	}
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: packetIsForMe
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* packet -- a received PPPoE packet
-*%RETURNS:
-* 1 if packet is for this PPPoE daemon; 0 otherwise.
-*%DESCRIPTION:
-* If we are using the Host-Unique tag, verifies that packet contains
-* our unique identifier.
-***********************************************************************/
-int
-packetIsForMe(PPPoEConnection *conn, PPPoEPacket *packet)
-{
-    int forMe = 0;
-
-    /* If we're not using the Host-Unique tag, then accept the packet */
-    if (!conn->useHostUniq) return 1;
-
-    parsePacket(packet, parseForHostUniq, &forMe);
-    return forMe;
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADOTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.  Should point to a PacketCriteria structure
-*          which gets filled in according to selected AC name and service
-*          name.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADO packet
-***********************************************************************/
-void
-parsePADOTags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    struct PacketCriteria *pc = (struct PacketCriteria *) extra;
-    PPPoEConnection *conn = pc->conn;
-    int i;
-
-    switch(type) {
-    case TAG_AC_NAME:
-	if (conn->printACNames) {
-	    printf("Access-Concentrator: %.*s\n", (int) len, data);
-	}
-	if (conn->acName && len == strlen(conn->acName) &&
-	    !strncmp((char *) data, conn->acName, len)) {
-	    pc->acNameOK = 1;
-	}
-	break;
-    case TAG_SERVICE_NAME:
-	if (conn->printACNames && len > 0) {
-	    printf("       Service-Name: %.*s\n", (int) len, data);
-	}
-	if (conn->serviceName && len == strlen(conn->serviceName) &&
-	    !strncmp((char *) data, conn->serviceName, len)) {
-	    pc->serviceNameOK = 1;
-	}
-	break;
-    case TAG_AC_COOKIE:
-	if (conn->printACNames) {
-	    printf("Got a cookie:");
-	    /* Print first 20 bytes of cookie */
-	    for (i=0; i<len && i < 20; i++) {
-		printf(" %02x", (unsigned) data[i]);
-	    }
-	    if (i < len) printf("...");
-	    printf("\n");
-	}
-	conn->cookie.type = htons(type);
-	conn->cookie.length = htons(len);
-	memcpy(conn->cookie.payload, data, len);
-	break;
-    case TAG_RELAY_SESSION_ID:
-	if (conn->printACNames) {
-	    printf("Got a Relay-ID:");
-	    /* Print first 20 bytes of relay ID */
-	    for (i=0; i<len && i < 20; i++) {
-		printf(" %02x", (unsigned) data[i]);
-	    }
-	    if (i < len) printf("...");
-	    printf("\n");
-	}
-	conn->relayId.type = htons(type);
-	conn->relayId.length = htons(len);
-	memcpy(conn->relayId.payload, data, len);
-	break;
-    case TAG_SERVICE_NAME_ERROR:
-	if (conn->printACNames) {
-	    printf("Got a Service-Name-Error tag: %.*s\n", (int) len, data);
-	} else {
-	    syslog(LOG_ERR, "PADO: Service-Name-Error: %.*s", (int) len, data);
-	    exit(1);
-	}
-	break;
-    case TAG_AC_SYSTEM_ERROR:
-	if (conn->printACNames) {
-	    printf("Got a System-Error tag: %.*s\n", (int) len, data);
-	} else {
-	    syslog(LOG_ERR, "PADO: System-Error: %.*s", (int) len, data);
-	    exit(1);
-	}
-	break;
-    case TAG_GENERIC_ERROR:
-	if (conn->printACNames) {
-	    printf("Got a Generic-Error tag: %.*s\n", (int) len, data);
-	} else {
-	    syslog(LOG_ERR, "PADO: Generic-Error: %.*s", (int) len, data);
-	    exit(1);
-	}
-	break;
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADSTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data (pointer to PPPoEConnection structure)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADS packet
-***********************************************************************/
-void
-parsePADSTags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    PPPoEConnection *conn = (PPPoEConnection *) extra;
-    switch(type) {
-    case TAG_SERVICE_NAME:
-	syslog(LOG_DEBUG, "PADS: Service-Name: '%.*s'", (int) len, data);
-	break;
-    case TAG_SERVICE_NAME_ERROR:
-	syslog(LOG_ERR, "PADS: Service-Name-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADS: Service-Name-Error: %.*s\n", (int) len, data);
-	exit(1);
-    case TAG_AC_SYSTEM_ERROR:
-	syslog(LOG_ERR, "PADS: System-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADS: System-Error: %.*s\n", (int) len, data);
-	exit(1);
-    case TAG_GENERIC_ERROR:
-	syslog(LOG_ERR, "PADS: Generic-Error: %.*s", (int) len, data);
-	fprintf(stderr, "PADS: Generic-Error: %.*s\n", (int) len, data);
-	exit(1);
-    case TAG_RELAY_SESSION_ID:
-	conn->relayId.type = htons(type);
-	conn->relayId.length = htons(len);
-	memcpy(conn->relayId.payload, data, len);
-	break;
-    }
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADI
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADI packet
-***********************************************************************/
-void
-sendPADI(PPPoEConnection *conn)
-{
-    PPPoEPacket packet;
-    unsigned char *cursor = packet.payload;
-    PPPoETag *svc = (PPPoETag *) (&packet.payload);
-    UINT16_t namelen = 0;
-    UINT16_t plen;
-
-    if (conn->serviceName) {
-	namelen = (UINT16_t) strlen(conn->serviceName);
-    }
-    plen = TAG_HDR_SIZE + namelen;
-    CHECK_ROOM(cursor, packet.payload, plen);
-
-    /* Set destination to Ethernet broadcast address */
-    memset(packet.ethHdr.h_dest, 0xFF, ETH_ALEN);
-    memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    packet.ver = 1;
-    packet.type = 1;
-    packet.code = CODE_PADI;
-    packet.session = 0;
-
-    svc->type = TAG_SERVICE_NAME;
-    svc->length = htons(namelen);
-    CHECK_ROOM(cursor, packet.payload, namelen+TAG_HDR_SIZE);
-
-    if (conn->serviceName) {
-	memcpy(svc->payload, conn->serviceName, strlen(conn->serviceName));
-    }
-    cursor += namelen + TAG_HDR_SIZE;
-
-    /* If we're using Host-Uniq, copy it over */
-    if (conn->useHostUniq) {
-	PPPoETag hostUniq;
-	pid_t pid = getpid();
-	hostUniq.type = htons(TAG_HOST_UNIQ);
-	hostUniq.length = htons(sizeof(pid));
-	memcpy(hostUniq.payload, &pid, sizeof(pid));
-	CHECK_ROOM(cursor, packet.payload, sizeof(pid) + TAG_HDR_SIZE);
-	memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
-	cursor += sizeof(pid) + TAG_HDR_SIZE;
-	plen += sizeof(pid) + TAG_HDR_SIZE;
-    }
-
-    packet.length = htons(plen);
-
-    sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "SENT");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: waitForPADO
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* timeout -- how long to wait (in seconds)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Waits for a PADO packet and copies useful information
-***********************************************************************/
-void
-waitForPADO(PPPoEConnection *conn, int timeout)
-{
-    fd_set readable;
-    int r;
-    struct timeval tv;
-    PPPoEPacket packet;
-    int len;
-
-    struct PacketCriteria pc;
-    pc.conn          = conn;
-    pc.acNameOK      = (conn->acName)      ? 0 : 1;
-    pc.serviceNameOK = (conn->serviceName) ? 0 : 1;
-	
-    do {
-	if (BPF_BUFFER_IS_EMPTY) {
-	    tv.tv_sec = timeout;
-	    tv.tv_usec = 0;
-	
-	    FD_ZERO(&readable);
-	    FD_SET(conn->discoverySocket, &readable);
-
-	    while(1) {
-		r = select(conn->discoverySocket+1, &readable, NULL, NULL, &tv);
-		if (r >= 0 || errno != EINTR) break;
-	    }
-	    if (r < 0) {
-		fatalSys("select (waitForPADO)");
-	    }
-	    if (r == 0) return;        /* Timed out */
-	}
-	
-	/* Get the packet */
-	receivePacket(conn->discoverySocket, &packet, &len);
-
-	/* Check length */
-	if (ntohs(packet.length) + HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-		   (unsigned int) ntohs(packet.length));
-	    continue;
-	}
-
-#ifdef USE_BPF
-	/* If it's not a Discovery packet, loop again */
-	if (etherType(&packet) != Eth_PPPOE_Discovery) continue;
-#endif
-
-	if (conn->debugFile) {
-	    dumpPacket(conn->debugFile, &packet, "RCVD");
-	    fprintf(conn->debugFile, "\n");
-	    fflush(conn->debugFile);
-	}
-	/* If it's not for us, loop again */
-	if (!packetIsForMe(conn, &packet)) continue;
-
-	if (packet.code == CODE_PADO) {
-	    if (NOT_UNICAST(packet.ethHdr.h_source)) {
-		printErr("Ignoring PADO packet from non-unicast MAC address");
-		continue;
-	    }
-	    conn->numPADOs++;
-	    if (conn->printACNames) {
-		printf("--------------------------------------------------\n");
-	    }
-	    parsePacket(&packet, parsePADOTags, &pc);
-	    if (pc.acNameOK && pc.serviceNameOK) {
-		memcpy(conn->peerEth, packet.ethHdr.h_source, ETH_ALEN);
-		if (conn->printACNames) {
-		    printf("AC-Ethernet-Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
-			   (unsigned) conn->peerEth[0], 
-			   (unsigned) conn->peerEth[1],
-			   (unsigned) conn->peerEth[2],
-			   (unsigned) conn->peerEth[3],
-			   (unsigned) conn->peerEth[4],
-			   (unsigned) conn->peerEth[5]);
-		    continue;
-		}
-		conn->discoveryState = STATE_RECEIVED_PADO;
-		break;
-	    }
-	}
-    } while (conn->discoveryState != STATE_RECEIVED_PADO);
-}
-
-/***********************************************************************
-*%FUNCTION: sendPADR
-*%ARGUMENTS:
-* conn -- PPPoE connection structur
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADR packet
-***********************************************************************/
-void
-sendPADR(PPPoEConnection *conn)
-{
-    PPPoEPacket packet;
-    PPPoETag *svc = (PPPoETag *) packet.payload;
-    unsigned char *cursor = packet.payload;
-
-    UINT16_t namelen = 0;
-    UINT16_t plen;
-
-    if (conn->serviceName) {
-	namelen = (UINT16_t) strlen(conn->serviceName);
-    }
-    plen = TAG_HDR_SIZE + namelen;
-    CHECK_ROOM(cursor, packet.payload, plen);
-
-    memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
-    memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    packet.ver = 1;
-    packet.type = 1;
-    packet.code = CODE_PADR;
-    packet.session = 0;
-
-    svc->type = TAG_SERVICE_NAME;
-    svc->length = htons(namelen);
-    if (conn->serviceName) {
-	memcpy(svc->payload, conn->serviceName, namelen);
-    }
-    cursor += namelen + TAG_HDR_SIZE;
-
-    /* If we're using Host-Uniq, copy it over */
-    if (conn->useHostUniq) {
-	PPPoETag hostUniq;
-	pid_t pid = getpid();
-	hostUniq.type = htons(TAG_HOST_UNIQ);
-	hostUniq.length = htons(sizeof(pid));
-	memcpy(hostUniq.payload, &pid, sizeof(pid));
-	CHECK_ROOM(cursor, packet.payload, sizeof(pid)+TAG_HDR_SIZE);
-	memcpy(cursor, &hostUniq, sizeof(pid) + TAG_HDR_SIZE);
-	cursor += sizeof(pid) + TAG_HDR_SIZE;
-	plen += sizeof(pid) + TAG_HDR_SIZE;
-    }
-
-    /* Copy cookie and relay-ID if needed */
-    if (conn->cookie.type) {
-	CHECK_ROOM(cursor, packet.payload,
-		   ntohs(conn->cookie.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &conn->cookie, ntohs(conn->cookie.length) + TAG_HDR_SIZE);
-	cursor += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
-	plen += ntohs(conn->cookie.length) + TAG_HDR_SIZE;
-    }
-
-    if (conn->relayId.type) {
-	CHECK_ROOM(cursor, packet.payload,
-		   ntohs(conn->relayId.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &conn->relayId, ntohs(conn->relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(conn->relayId.length) + TAG_HDR_SIZE;
-    }
-
-    packet.length = htons(plen);
-    sendPacket(conn, conn->discoverySocket, &packet, (int) (plen + HDR_SIZE));
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "SENT");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: waitForPADS
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* timeout -- how long to wait (in seconds)
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Waits for a PADS packet and copies useful information
-***********************************************************************/
-void
-waitForPADS(PPPoEConnection *conn, int timeout)
-{
-    fd_set readable;
-    int r;
-    struct timeval tv;
-    PPPoEPacket packet;
-    int len;
-
-    do {
-	if (BPF_BUFFER_IS_EMPTY) {
-	    tv.tv_sec = timeout;
-	    tv.tv_usec = 0;
-	    
-	    FD_ZERO(&readable);
-	    FD_SET(conn->discoverySocket, &readable);
-	    
-	    while(1) {
-		r = select(conn->discoverySocket+1, &readable, NULL, NULL, &tv);
-		if (r >= 0 || errno != EINTR) break;
-	    }
-	    if (r < 0) {
-		fatalSys("select (waitForPADS)");
-	    }
-	    if (r == 0) return;
-	}
-
-	/* Get the packet */
-	receivePacket(conn->discoverySocket, &packet, &len);
-
-	/* Check length */
-	if (ntohs(packet.length) + HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-		   (unsigned int) ntohs(packet.length));
-	    continue;
-	}
-
-#ifdef USE_BPF
-	/* If it's not a Discovery packet, loop again */
-	if (etherType(&packet) != Eth_PPPOE_Discovery) continue;
-#endif
-	if (conn->debugFile) {
-	    dumpPacket(conn->debugFile, &packet, "RCVD");
-	    fprintf(conn->debugFile, "\n");
-	    fflush(conn->debugFile);
-	}
-
-	/* If it's not from the AC, it's not for me */
-	if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) continue;
-
-	/* If it's not for us, loop again */
-	if (!packetIsForMe(conn, &packet)) continue;
-
-	/* Is it PADS?  */
-	if (packet.code == CODE_PADS) {
-	    /* Parse for goodies */
-	    parsePacket(&packet, parsePADSTags, conn);
-	    conn->discoveryState = STATE_SESSION;
-	    break;
-	}
-    } while (conn->discoveryState != STATE_SESSION);
-
-    /* Don't bother with ntohs; we'll just end up converting it back... */
-    conn->session = packet.session;
-
-    syslog(LOG_INFO, "PPP session is %d", (int) ntohs(conn->session));
-
-    /* RFC 2516 says session id MUST NOT be zero or 0xFFFF */
-    if (ntohs(conn->session) == 0 || ntohs(conn->session) == 0xFFFF) {
-	syslog(LOG_ERR, "Access concentrator used a session value of %x -- the AC is violating RFC 2516", (unsigned int) ntohs(conn->session));
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: discovery
-*%ARGUMENTS:
-* conn -- PPPoE connection info structure
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Performs the PPPoE discovery phase
-***********************************************************************/
-void
-discovery(PPPoEConnection *conn)
-{
-    int padiAttempts = 0;
-    int padrAttempts = 0;
-    int timeout = PADI_TIMEOUT;
-
-    /* Skip discovery and don't open discovery socket? */
-    if (conn->skipDiscovery && conn->noDiscoverySocket) {
-	conn->discoveryState = STATE_SESSION;
-	return;
-    }
-
-    conn->discoverySocket =
-	openInterface(conn->ifName, Eth_PPPOE_Discovery, conn->myEth);
-
-    /* Skip discovery? */
-    if (conn->skipDiscovery) {
-	conn->discoveryState = STATE_SESSION;
-	if (conn->killSession) {
-	    sendPADT(conn, "RP-PPPoE: Session killed manually");
-	    exit(0);
-	}
-	return;
-    }
-
-    do {
-	padiAttempts++;
-	if (padiAttempts > MAX_PADI_ATTEMPTS) {
-	    rp_fatal("Timeout waiting for PADO packets");
-	}
-	sendPADI(conn);
-	conn->discoveryState = STATE_SENT_PADI;
-	waitForPADO(conn, timeout);
-
-	/* If we're just probing for access concentrators, don't do
-	   exponential backoff.  This reduces the time for an unsuccessful
-	   probe to 15 seconds. */
-	if (!conn->printACNames) {
-	    timeout *= 2;
-	}
-	if (conn->printACNames && conn->numPADOs) {
-	    break;
-	}
-    } while (conn->discoveryState == STATE_SENT_PADI);
-
-    /* If we're only printing access concentrator names, we're done */
-    if (conn->printACNames) {
-	printf("--------------------------------------------------\n");
-	exit(0);
-    }
-
-    timeout = PADI_TIMEOUT;
-    do {
-	padrAttempts++;
-	if (padrAttempts > MAX_PADI_ATTEMPTS) {
-	    rp_fatal("Timeout waiting for PADS packets");
-	}
-	sendPADR(conn);
-	conn->discoveryState = STATE_SENT_PADR;
-	waitForPADS(conn, timeout);
-	timeout *= 2;
-    } while (conn->discoveryState == STATE_SENT_PADR);
-
-    /* We're done. */
-    conn->discoveryState = STATE_SESSION;
-    return;
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/if.c b/mdk-stage1/rp-pppoe/src/if.c
deleted file mode 100644
index fec09b273..000000000
--- a/mdk-stage1/rp-pppoe/src/if.c
+++ /dev/null
@@ -1,1092 +0,0 @@
-/***********************************************************************
-*
-* if.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for opening a raw socket and reading/writing raw Ethernet frames.
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_NETPACKET_PACKET_H
-#include <netpacket/packet.h>
-#elif defined(HAVE_LINUX_IF_PACKET_H)
-#include <linux/if_packet.h>
-#endif
-
-#ifdef HAVE_NET_ETHERNET_H
-#include <net/ethernet.h>
-#endif
-
-#ifdef HAVE_ASM_TYPES_H
-#include <asm/types.h>
-#endif
-
-#ifdef HAVE_SYS_IOCTL_H
-#include <sys/ioctl.h>
-#endif
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <errno.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifdef HAVE_NET_IF_ARP_H
-#include <net/if_arp.h>
-#endif
-
-#ifdef USE_DLPI
-
-#include <limits.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/stream.h>
-#include <sys/stropts.h>
-#include <sys/dlpi.h>
-#include <sys/bufmod.h>
-#include <stdio.h>
-#include <signal.h>
-#include <stropts.h>
-
-/* function declarations */
-
-void dlpromisconreq( int fd, u_long  level);
-void dlinforeq(int fd);
-void dlunitdatareq(int fd, u_char *addrp, int addrlen, u_long minpri, u_long maxpri, u_char *datap, int datalen);
-void dlinfoack(int fd, char *bufp);
-void dlbindreq(int fd, u_long sap, u_long max_conind, u_long service_mode, u_long conn_mgmt, u_long xidtest);
-void dlattachreq(int fd, u_long ppa);
-void dlokack(int fd, char *bufp);
-void dlbindack(int fd, char *bufp);
-int strioctl(int fd, int cmd, int timout, int len, char *dp);
-void strgetmsg(int fd, struct strbuf *ctlp, struct strbuf *datap, int *flagsp, char *caller);
-void sigalrm(int sig);
-void expecting(int prim, union DL_primitives *dlp);
-char *dlprim(u_long prim);
-
-/* #define DL_DEBUG */
-
-static	int     dl_abssaplen;
-static	int     dl_saplen;
-static	int 	dl_addrlen;
-
-#endif
-
-#ifdef USE_BPF
-#include <net/bpf.h>
-#include <fcntl.h>
-
-unsigned char *bpfBuffer;	/* Packet filter buffer */
-int bpfLength = 0;		/* Packet filter buffer length */
-int bpfSize = 0;		/* Number of unread bytes in buffer */
-int bpfOffset = 0;		/* Current offset in bpfBuffer */
-#endif
-
-/* Initialize frame types to RFC 2516 values.  Some broken peers apparently
-   use different frame types... sigh... */
-
-UINT16_t Eth_PPPOE_Discovery = ETH_PPPOE_DISCOVERY;
-UINT16_t Eth_PPPOE_Session   = ETH_PPPOE_SESSION;
-
-/**********************************************************************
-*%FUNCTION: etherType
-*%ARGUMENTS:
-* packet -- a received PPPoE packet
-*%RETURNS:
-* ethernet packet type (see /usr/include/net/ethertypes.h)
-*%DESCRIPTION:
-* Checks the ethernet packet header to determine its type.
-* We should only be receveing DISCOVERY and SESSION types if the BPF
-* is set up correctly.  Logs an error if an unexpected type is received.
-* Note that the ethernet type names come from "pppoe.h" and the packet
-* packet structure names use the LINUX dialect to maintain consistency
-* with the rest of this file.  See the BSD section of "pppoe.h" for
-* translations of the data structure names.
-***********************************************************************/
-UINT16_t
-etherType(PPPoEPacket *packet)
-{
-    UINT16_t type = (UINT16_t) ntohs(packet->ethHdr.h_proto);
-    if (type != Eth_PPPOE_Discovery && type != Eth_PPPOE_Session) {
-	syslog(LOG_ERR, "Invalid ether type 0x%x", type);
-    }
-    return type;
-}
-
-#ifdef USE_BPF
-/**********************************************************************
-*%FUNCTION: getHWaddr
-*%ARGUMENTS:
-* ifname -- name of interface
-* hwaddr -- buffer for ehthernet address
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Locates the Ethernet hardware address for an interface.
-***********************************************************************/
-void
-getHWaddr(int sock, char const *ifname, unsigned char *hwaddr)
-{
-    char inbuf[8192];
-    const struct sockaddr_dl *sdl;
-    struct ifconf ifc;
-    struct ifreq ifreq, *ifr;
-    int i;
-    int found = 0;
-
-    ifc.ifc_len = sizeof(inbuf);
-    ifc.ifc_buf = inbuf;
-    if (ioctl(sock, SIOCGIFCONF, &ifc) < 0) {
-	fatalSys("SIOCGIFCONF");
-    }
-    ifr = ifc.ifc_req;
-    ifreq.ifr_name[0] = '\0';
-    for (i = 0; i < ifc.ifc_len; ) {
-	ifr = (struct ifreq *)((caddr_t)ifc.ifc_req + i);
-	i += sizeof(ifr->ifr_name) +
-		    (ifr->ifr_addr.sa_len > sizeof(struct sockaddr)
-		    ? ifr->ifr_addr.sa_len
-		    : sizeof(struct sockaddr));
-	if (ifr->ifr_addr.sa_family == AF_LINK) {
-	    sdl = (const struct sockaddr_dl *) &ifr->ifr_addr;
-	    if ((sdl->sdl_type == IFT_ETHER) &&
-	        (sdl->sdl_alen == ETH_ALEN) &&
-		!strncmp(ifname, ifr->ifr_name, sizeof(ifr->ifr_name))) {
-		if (found) {
-		    char buffer[256];
-		    sprintf(buffer, "interface %.16s has more than one ethernet address", ifname);
-		    rp_fatal(buffer);
-		} else {
-		    found = 1;
-	            memcpy(hwaddr, LLADDR(sdl), ETH_ALEN);
-		}
-	    }
-	}
-    }
-    if (!found) {
-	char buffer[256];
-        sprintf(buffer, "interface %.16s has no ethernet address", ifname);
-	rp_fatal(buffer);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: initFilter
-*%ARGUMENTS:
-* fd -- file descriptor of BSD device
-* type -- Ethernet frame type (0 for watch mode)
-* hwaddr -- buffer with ehthernet address
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes the packet filter rules.
-***********************************************************************/
-void
-initFilter(int fd, UINT16_t type, unsigned char *hwaddr)
-{
-    /* Packet Filter Instructions:
-     * Note that the ethernet type names come from "pppoe.h" and are
-     * used here to maintain consistency with the rest of this file. */
-    static struct bpf_insn bpfRun[] = {         /* run PPPoE */
-        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 12),     /* ethernet type */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_SESSION, 5, 0),
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, ETH_PPPOE_DISCOVERY, 0, 9),
-        BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0),      /* first word of dest. addr */
-#define PPPOE_BCAST_CMPW 4                     /* offset of word compare */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 2),
-        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4),      /* next 1/2 word of dest. */
-#define PPPOE_BCAST_CMPH 6                     /* offset of 1/2 word compare */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 4, 0),
-        BPF_STMT(BPF_LD+BPF_W+BPF_ABS, 0),      /* first word of dest. addr */
-#define PPPOE_FILTER_CMPW 8                     /* offset of word compare */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 3),
-        BPF_STMT(BPF_LD+BPF_H+BPF_ABS, 4),      /* next 1/2 word of dest. */
-#define PPPOE_FILTER_CMPH 10                    /* offset of 1/rd compare */
-        BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, 0, 0, 1),
-        BPF_STMT(BPF_RET+BPF_K, (u_int) -1),    /* keep packet */
-        BPF_STMT(BPF_RET+BPF_K, 0),             /* drop packet */
-    };
-
-    /* Fix the potentially varying parts */
-    bpfRun[1].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
-    bpfRun[1].jt   = 5;
-    bpfRun[1].jf   = 0;
-    bpfRun[1].k    = Eth_PPPOE_Session;
-
-    bpfRun[2].code = (u_short) BPF_JMP+BPF_JEQ+BPF_K;
-    bpfRun[2].jt   = 0;
-    bpfRun[2].jf   = 9;
-    bpfRun[2].k    = Eth_PPPOE_Discovery;
-
-    {
-      struct bpf_insn bpfInsn[sizeof(bpfRun) / sizeof(bpfRun[0])];
-      struct bpf_program bpfProgram;
-      memcpy(bpfInsn, bpfRun, sizeof(bpfRun));
-      bpfInsn[PPPOE_BCAST_CMPW].k = ((0xff << 24) | (0xff << 16) |
-                                     (0xff << 8) | 0xff);
-      bpfInsn[PPPOE_BCAST_CMPH].k = ((0xff << 8) | 0xff);
-      bpfInsn[PPPOE_FILTER_CMPW].k = ((hwaddr[0] << 24) | (hwaddr[1] << 16) |
-				      (hwaddr[2] << 8) | hwaddr[3]);
-      bpfInsn[PPPOE_FILTER_CMPH].k = ((hwaddr[4] << 8) | hwaddr[5]);
-      bpfProgram.bf_len = (sizeof(bpfInsn) / sizeof(bpfInsn[0]));
-      bpfProgram.bf_insns = &bpfInsn[0];
-      
-      /* Apply the filter */
-      if (ioctl(fd, BIOCSETF, &bpfProgram) < 0) {
-	fatalSys("ioctl(BIOCSETF)");
-      }
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type (0 for any frame type)
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A file descriptor for talking with the Ethernet card.  Exits on error.
-* Note that the Linux version of this routine returns a socket instead.
-*%DESCRIPTION:
-* Opens a BPF on an interface for all PPPoE traffic (discovery and
-* session).  If 'type' is 0, uses promiscuous mode to watch any PPPoE
-* traffic on this network.
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
-    static int fd = -1;
-    char bpfName[32];
-    u_int optval;
-    struct bpf_version bpf_ver;
-    struct ifreq ifr;
-    int sock;
-    int i;
-
-    /* BSD only opens one socket for both Discovery and Session packets */
-    if (fd >= 0) {
-	return fd;
-    }
-
-    /* Find a free BPF device */
-    for (i = 0; i < 256; i++) {
-	sprintf(bpfName, "/dev/bpf%d", i);
-	if (((fd = open(bpfName, O_RDWR, 0)) >= 0) ||
-	    (errno != EBUSY)) {
-	    break;
-	}
-    }
-    if (fd < 0) {
-	switch (errno) {
-	case EACCES:		/* permission denied */
-	    {
-		char buffer[256];
-		sprintf(buffer, "Cannot open %.32s -- pppoe must be run as root.", bpfName);
-		rp_fatal(buffer);
-	    }
-	    break;
-	case EBUSY:
-	case ENOENT:		/* no such file */
-	    if (i == 0) {
-		rp_fatal("No /dev/bpf* devices (check your kernel configuration for BPF support)");
-	    } else {
-		rp_fatal("All /dev/bpf* devices are in use");
-	    }
-	    break;
-	}
-	fatalSys(bpfName);
-    }
-
-    if ((sock = socket(AF_LOCAL, SOCK_DGRAM, 0)) < 0) {
-	fatalSys("socket");
-    }
-
-    /* Check that the interface is up */
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock, SIOCGIFFLAGS, &ifr) < 0) {
-	fatalSys("ioctl(SIOCGIFFLAGS)");
-    }
-    if ((ifr.ifr_flags & IFF_UP) == 0) {
-	char buffer[256];
-	sprintf(buffer, "Interface %.16s is not up\n", ifname);
-	rp_fatal(buffer);
-    }
-
-    /* Fill in hardware address and initialize the packet filter rules */
-    if (hwaddr == NULL) {
-	rp_fatal("openInterface: no hwaddr arg.");
-    }
-    getHWaddr(sock, ifname, hwaddr);
-    initFilter(fd, type, hwaddr);
-
-    /* Sanity check on MTU -- apparently does not work on OpenBSD */
-#if !defined(__OpenBSD__)
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(sock, SIOCGIFMTU, &ifr) < 0) {
-	fatalSys("ioctl(SIOCGIFMTU)");
-    }
-    if (ifr.ifr_mtu < ETH_DATA_LEN) {
-	char buffer[256];
-	sprintf(buffer, "Interface %.16s has MTU of %d -- should be %d.  You may have serious connection problems.",
-		ifname, ifr.ifr_mtu, ETH_DATA_LEN);
-	printErr(buffer);
-    }
-#endif
-
-    /* done with the socket */
-    if (close(sock) < 0) {
-	fatalSys("close");
-    }
-
-    /* Check the BPF version number */
-    if (ioctl(fd, BIOCVERSION, &bpf_ver) < 0) {
-	fatalSys("ioctl(BIOCVERSION)");
-    }
-    if ((bpf_ver.bv_major != BPF_MAJOR_VERSION) ||
-        (bpf_ver.bv_minor < BPF_MINOR_VERSION)) {
-	char buffer[256];
-	sprintf(buffer, "Unsupported BPF version: %d.%d (kernel: %d.%d)", 
-			BPF_MAJOR_VERSION, BPF_MINOR_VERSION,
-			bpf_ver.bv_major, bpf_ver.bv_minor);
-	rp_fatal(buffer);
-    }
-
-    /* allocate a receive packet buffer */
-    if (ioctl(fd, BIOCGBLEN, &bpfLength) < 0) {
-	fatalSys("ioctl(BIOCGBLEN)");
-    }
-    if (!(bpfBuffer = (unsigned char *) malloc(bpfLength))) {
-	rp_fatal("malloc");
-    }
-
-    /* reads should return as soon as there is a packet available */
-    optval = 1;
-    if (ioctl(fd, BIOCIMMEDIATE, &optval) < 0) {
-	fatalSys("ioctl(BIOCIMMEDIATE)");
-    }
-
-    /* Bind the interface to the filter */
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(fd, BIOCSETIF, &ifr) < 0) {
-	char buffer[256];
-	sprintf(buffer, "ioctl(BIOCSETIF) can't select interface %.16s",
-		ifname);
-	rp_fatal(buffer);
-    }
-
-    syslog(LOG_INFO, "Interface=%.16s HWaddr=%02X:%02X:%02X:%02X:%02X:%02X Device=%.32s Buffer size=%d",
-	   ifname, 
-	   hwaddr[0], hwaddr[1], hwaddr[2],
-	   hwaddr[3], hwaddr[4], hwaddr[5],
-	   bpfName, bpfLength);
-    return fd;
-}
-
-#endif /* USE_BPF */
-
-#ifdef USE_LINUX_PACKET
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A raw socket for talking to the Ethernet card.  Exits on error.
-*%DESCRIPTION:
-* Opens a raw Ethernet socket
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
-    int optval=1;
-    int fd;
-    struct ifreq ifr;
-    int domain, stype;
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
-    struct sockaddr_ll sa;
-#else
-    struct sockaddr sa;
-#endif
-
-    memset(&sa, 0, sizeof(sa));
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
-    domain = PF_PACKET;
-    stype = SOCK_RAW;
-#else
-    domain = PF_INET;
-    stype = SOCK_PACKET;
-#endif
-
-    if ((fd = socket(domain, stype, htons(type))) < 0) {
-	/* Give a more helpful message for the common error case */
-	if (errno == EPERM) {
-	    rp_fatal("Cannot create raw socket -- pppoe must be run as root.");
-	}
-	fatalSys("socket");
-    }
-
-    if (setsockopt(fd, SOL_SOCKET, SO_BROADCAST, &optval, sizeof(optval)) < 0) {
-	fatalSys("setsockopt");
-    }
-
-    /* Fill in hardware address */
-    if (hwaddr) {
-	strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-	if (ioctl(fd, SIOCGIFHWADDR, &ifr) < 0) {
-	    fatalSys("ioctl(SIOCGIFHWADDR)");
-	}
-	memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETH_ALEN);
-#ifdef ARPHRD_ETHER
-	if (ifr.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
-	    char buffer[256];
-	    sprintf(buffer, "Interface %.16s is not Ethernet", ifname);
-	    rp_fatal(buffer);
-	}
-#endif
-	if (NOT_UNICAST(hwaddr)) {
-	    char buffer[256];
-	    sprintf(buffer,
-		    "Interface %.16s has broadcast/multicast MAC address??",
-		    ifname);
-	    rp_fatal(buffer);
-	}
-    }
-
-    /* Sanity check on MTU */
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(fd, SIOCGIFMTU, &ifr) < 0) {
-	fatalSys("ioctl(SIOCGIFMTU)");
-    }
-    if (ifr.ifr_mtu < ETH_DATA_LEN) {
-	char buffer[256];
-	sprintf(buffer, "Interface %.16s has MTU of %d -- should be %d.  You may have serious connection problems.",
-		ifname, ifr.ifr_mtu, ETH_DATA_LEN);
-	printErr(buffer);
-    }
-
-#ifdef HAVE_STRUCT_SOCKADDR_LL
-    /* Get interface index */
-    sa.sll_family = AF_PACKET;
-    sa.sll_protocol = htons(type);
-
-    strncpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    if (ioctl(fd, SIOCGIFINDEX, &ifr) < 0) {
-	fatalSys("ioctl(SIOCFIGINDEX): Could not get interface index");
-    }
-    sa.sll_ifindex = ifr.ifr_ifindex;
-
-#else
-    strcpy(sa.sa_data, ifname);
-#endif
-
-    /* We're only interested in packets on specified interface */
-    if (bind(fd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
-	fatalSys("bind");
-    }
-
-    return fd;
-}
-
-#endif /* USE_LINUX */
-
-/***********************************************************************
-*%FUNCTION: sendPacket
-*%ARGUMENTS:
-* sock -- socket to send to
-* pkt -- the packet to transmit
-* size -- size of packet (in bytes)
-*%RETURNS:
-* 0 on success; -1 on failure
-*%DESCRIPTION:
-* Transmits a packet
-***********************************************************************/
-int
-sendPacket(PPPoEConnection *conn, int sock, PPPoEPacket *pkt, int size)
-{
-#if defined(USE_BPF)
-    if (write(sock, pkt, size) < 0) {
-	sysErr("write (sendPacket)");
-	return -1;
-    }
-#elif defined(HAVE_STRUCT_SOCKADDR_LL)
-    if (send(sock, pkt, size, 0) < 0) {
-	sysErr("send (sendPacket)");
-	return -1;
-    }
-#else
-#ifdef USE_DLPI
-
-#define ABS(x)          ((x) < 0 ? -(x) : (x))
-
-	u_char  addr[MAXDLADDR];
-	u_char  phys[MAXDLADDR];
-	u_char  sap[MAXDLADDR];
-	u_char    xmitbuf[MAXDLBUF];
-	int	data_size;
-
-	short	tmp_sap;
-
-	tmp_sap = htons(pkt->ethHdr.h_proto); 
-	data_size = size - sizeof(struct ethhdr); 
-
-	memcpy((char *)phys, (char *)pkt->ethHdr.h_dest, ETHERADDRL);
-	memcpy((char *)sap,  (char *)&tmp_sap, sizeof(ushort_t));
-	memcpy((char *)xmitbuf, (char *)pkt + sizeof(struct ethhdr), data_size); 
-
-	if (dl_saplen > 0) {  /* order is sap+phys */
-		(void) memcpy((char*)addr, (char*)&sap, dl_abssaplen);
-		(void) memcpy((char*)addr+dl_abssaplen, (char*)phys, ETHERADDRL);
-	} else {        /* order is phys+sap */
-		(void) memcpy((char*)addr, (char*)phys, ETHERADDRL);
-		(void) memcpy((char*)addr+ETHERADDRL, (char*)&sap, dl_abssaplen);
-	}
-
-#ifdef DL_DEBUG
-	printf("%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x\n", 
-		addr[0],addr[1],addr[2],addr[3],addr[4],addr[5],
-		addr[6],addr[7]);
-#endif
-
-	dlunitdatareq(sock, addr, dl_addrlen, 0, 0, xmitbuf, data_size);
-
-
-
-#else
-    struct sockaddr sa;
-
-    if (!conn) {
-	rp_fatal("relay and server not supported on Linux 2.0 kernels");
-    }
-    strcpy(sa.sa_data, conn->ifName);
-    if (sendto(sock, pkt, size, 0, &sa, sizeof(sa)) < 0) {
-	sysErr("sendto (sendPacket)");
-	return -1;
-    }
-#endif
-#endif
-    return 0;
-}
-
-#ifdef USE_BPF
-/***********************************************************************
-*%FUNCTION: clearPacketHeader
-*%ARGUMENTS:
-* pkt -- packet that needs its head clearing
-*%RETURNS:
-* nothing
-*%DESCRIPTION:
-* Clears a PPPoE packet header after a truncated packet has been
-* received.  Insures that the packet will fail any integrity tests
-* and will be discarded by upper level routines.  Also resets the
-* bpfSize and bpfOffset variables to force a new read on the next
-* call to receivePacket().
-***********************************************************************/
-void
-clearPacketHeader(PPPoEPacket *pkt)
-{
-    bpfSize = bpfOffset = 0;
-    memset(pkt, 0, HDR_SIZE);
-}
-#endif
-
-/***********************************************************************
-*%FUNCTION: receivePacket
-*%ARGUMENTS:
-* sock -- socket to read from
-* pkt -- place to store the received packet
-* size -- set to size of packet in bytes
-*%RETURNS:
-* >= 0 if all OK; < 0 if error
-*%DESCRIPTION:
-* Receives a packet
-***********************************************************************/
-int
-receivePacket(int sock, PPPoEPacket *pkt, int *size)
-{
-#ifdef USE_BPF
-    struct bpf_hdr hdr;
-    int seglen, copylen;
-
-    if (bpfSize <= 0) {
-	bpfOffset = 0;
-	if ((bpfSize = read(sock, bpfBuffer, bpfLength)) < 0) {
-	    sysErr("read (receivePacket)");
-	    return -1;
-	}
-    }
-    if (bpfSize < sizeof(hdr)) {
-	syslog(LOG_ERR, "Truncated bpf packet header: len=%d", bpfSize);
-	clearPacketHeader(pkt);		/* resets bpfSize and bpfOffset */
-	return 0;
-    }
-    memcpy(&hdr, bpfBuffer + bpfOffset, sizeof(hdr));
-    if (hdr.bh_caplen != hdr.bh_datalen) {
-	syslog(LOG_ERR, "Truncated bpf packet: caplen=%d, datalen=%d",
-	       hdr.bh_caplen, hdr.bh_datalen);
-	clearPacketHeader(pkt);		/* resets bpfSize and bpfOffset */
-	return 0;
-    }
-    seglen = hdr.bh_hdrlen + hdr.bh_caplen;
-    if (seglen > bpfSize) {
-	syslog(LOG_ERR, "Truncated bpf packet: seglen=%d, bpfSize=%d",
-	       seglen, bpfSize);
-	clearPacketHeader(pkt);		/* resets bpfSize and bpfOffset */
-	return 0;
-    }
-    seglen = BPF_WORDALIGN(seglen);
-    *size = copylen = ((hdr.bh_caplen < sizeof(PPPoEPacket)) ?
-			hdr.bh_caplen : sizeof(PPPoEPacket));
-    memcpy(pkt, bpfBuffer + bpfOffset + hdr.bh_hdrlen, copylen);
-    if (seglen >= bpfSize) {
-	bpfSize = bpfOffset = 0;
-    } else {
-	bpfSize -= seglen;
-	bpfOffset += seglen;
-    }
-#else
-#ifdef USE_DLPI
-	struct strbuf data; 
-	int flags = 0; 	
-	int retval; 
-
-	data.buf = (char *) pkt; 
-	data.maxlen = MAXDLBUF; 
-	data.len = 0; 
-	
-	if ((retval = getmsg(sock, NULL, &data, &flags)) < 0) {
-	    sysErr("read (receivePacket)");
-	    return -1;
-	}
-
-	*size = data.len; 
-
-#else
-    if ((*size = recv(sock, pkt, sizeof(PPPoEPacket), 0)) < 0) {
-	sysErr("recv (receivePacket)");
-	return -1;
-    }
-#endif
-#endif
-    return 0;
-}
-
-#ifdef USE_DLPI
-/**********************************************************************
-*%FUNCTION: openInterface
-*%ARGUMENTS:
-* ifname -- name of interface
-* type -- Ethernet frame type
-* hwaddr -- if non-NULL, set to the hardware address
-*%RETURNS:
-* A raw socket for talking to the Ethernet card.  Exits on error.
-*%DESCRIPTION:
-* Opens a raw Ethernet socket
-***********************************************************************/
-int
-openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr)
-{
-    int fd;
-    long buf[MAXDLBUF]; 
-
-	union   DL_primitives   *dlp;
-
-    char base_dev[PATH_MAX]; 
-    int ppa; 
-
-    if(strlen(ifname) > PATH_MAX) {
-	rp_fatal("socket: string to long"); 
-    }
-
-    ppa = atoi(&ifname[strlen(ifname)-1]);
-    strncpy(base_dev, ifname, PATH_MAX); 
-    base_dev[strlen(base_dev)-1] = '\0'; 
-
-    if (( fd = open(base_dev, O_RDWR)) < 0) {
-	/* Give a more helpful message for the common error case */
-	if (errno == EPERM) {
-	    rp_fatal("Cannot create raw socket -- pppoe must be run as root.");
-	}
-	fatalSys("socket");
-    }
-
-	dlinforeq(fd);
-	dlinfoack(fd, (char *)buf);
-
-	dlp = (union DL_primitives*) buf;
-
-	dl_abssaplen = ABS(dlp->info_ack.dl_sap_length);
-	dl_saplen = dlp->info_ack.dl_sap_length;
-	if (ETHERADDRL != (dlp->info_ack.dl_addr_length - dl_abssaplen))
-		fatalSys("invalid destination physical address length");
-	dl_addrlen = dl_abssaplen + ETHERADDRL;
-
-	dlattachreq(fd, ppa); 
-	dlokack(fd, (char *)buf);
-
-	dlbindreq(fd, type, 0, DL_CLDLS, 0, 0);
-	dlbindack(fd, (char *)buf);
-
-	if ( strioctl(fd, DLIOCRAW, -1, 0, NULL) < 0 ) { 
-		fatalSys("DLIOCRAW"); 
-	}
-
-	if (ioctl(fd, I_FLUSH, FLUSHR) < 0) fatalSys("I_FLUSH");
-
-    return fd;
-}
-
-/* cloned from dlcommon.c */
-
-void dlpromisconreq(int fd, u_long level)
-{
-        dl_promiscon_req_t      promiscon_req;
-        struct  strbuf  ctl;
-        int     flags;
-
-        promiscon_req.dl_primitive = DL_PROMISCON_REQ;
-        promiscon_req.dl_level = level;
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (promiscon_req);
-        ctl.buf = (char *) &promiscon_req;
-
-        flags = 0;
-
-        if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
-                fatalSys("dlpromiscon:  putmsg");
-
-}
-
-void dlinforeq(int fd)
-{
-        dl_info_req_t   info_req;
-        struct  strbuf  ctl;
-        int     flags;
-
-        info_req.dl_primitive = DL_INFO_REQ;
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (info_req);
-        ctl.buf = (char *) &info_req;
-
-        flags = RS_HIPRI;
-
-        if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
-                fatalSys("dlinforeq:  putmsg");
-}
-
-void dlunitdatareq(int fd, u_char *addrp, int addrlen, u_long minpri, u_long maxpri, u_char *datap, int datalen)
-{
-        long    buf[MAXDLBUF];
-        union   DL_primitives   *dlp;
-        struct  strbuf  data, ctl;
-
-        dlp = (union DL_primitives*) buf;
-
-        dlp->unitdata_req.dl_primitive = DL_UNITDATA_REQ;
-        dlp->unitdata_req.dl_dest_addr_length = addrlen;
-        dlp->unitdata_req.dl_dest_addr_offset = sizeof (dl_unitdata_req_t);
-        dlp->unitdata_req.dl_priority.dl_min = minpri;
-        dlp->unitdata_req.dl_priority.dl_max = maxpri;
-
-        (void) memcpy(OFFADDR(dlp, sizeof (dl_unitdata_req_t)), addrp, addrlen);
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (dl_unitdata_req_t) + addrlen;
-        ctl.buf = (char *) buf;
-
-        data.maxlen = 0;
-        data.len = datalen;
-        data.buf = (char *) datap;
-
-        if (putmsg(fd, &ctl, &data, 0) < 0)
-                fatalSys("dlunitdatareq:  putmsg");
-}
-
-void dlinfoack(int fd, char *bufp)
-{
-        union   DL_primitives   *dlp;
-        struct  strbuf  ctl;
-        int     flags;
-
-        ctl.maxlen = MAXDLBUF;
-        ctl.len = 0;
-        ctl.buf = bufp;
-
-        strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlinfoack");
-
-        dlp = (union DL_primitives *) ctl.buf;
-
-        expecting(DL_INFO_ACK, dlp);
-
-        if (ctl.len < sizeof (dl_info_ack_t)) {
-		char buffer[256];
-		sprintf(buffer, "dlinfoack:  response ctl.len too short:  %d", ctl.len); 
-                rp_fatal(buffer); 
-	}
-
-        if (flags != RS_HIPRI)
-                rp_fatal("dlinfoack:  DL_INFO_ACK was not M_PCPROTO");
-
-        if (ctl.len < sizeof (dl_info_ack_t)) {
-		char buffer[256];
-		sprintf(buffer, "dlinfoack:  short response ctl.len:  %d", ctl.len); 
-		rp_fatal(buffer); 
-	}
-}
-
-void dlbindreq(int fd, u_long sap, u_long max_conind, u_long service_mode, u_long conn_mgmt, u_long xidtest)
-{
-        dl_bind_req_t   bind_req;
-        struct  strbuf  ctl;
-        int     flags;
-
-        bind_req.dl_primitive = DL_BIND_REQ;
-        bind_req.dl_sap = sap;
-        bind_req.dl_max_conind = max_conind;
-        bind_req.dl_service_mode = service_mode;
-        bind_req.dl_conn_mgmt = conn_mgmt;
-        bind_req.dl_xidtest_flg = xidtest;
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (bind_req);
-        ctl.buf = (char *) &bind_req;
-
-        flags = 0;
-
-        if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
-                fatalSys("dlbindreq:  putmsg");
-}
-
-void dlattachreq(int fd, u_long ppa)
-{
-        dl_attach_req_t attach_req;
-        struct  strbuf  ctl;
-        int     flags;
-
-        attach_req.dl_primitive = DL_ATTACH_REQ;
-        attach_req.dl_ppa = ppa;
-
-        ctl.maxlen = 0;
-        ctl.len = sizeof (attach_req);
-        ctl.buf = (char *) &attach_req;
-
-        flags = 0;
-
-        if (putmsg(fd, &ctl, (struct strbuf*) NULL, flags) < 0)
-                fatalSys("dlattachreq:  putmsg");
-}
-
-void dlokack(int fd, char *bufp)
-{
-        union   DL_primitives   *dlp;
-        struct  strbuf  ctl;
-        int     flags;
-
-        ctl.maxlen = MAXDLBUF;
-        ctl.len = 0;
-        ctl.buf = bufp;
-
-        strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlokack");
-
-        dlp = (union DL_primitives *) ctl.buf;
-
-        expecting(DL_OK_ACK, dlp);
-
-        if (ctl.len < sizeof (dl_ok_ack_t)) { 
-		char buffer[256];
-		sprintf(buffer, "dlokack:  response ctl.len too short:  %d", ctl.len);
-		rp_fatal(buffer); 
-	}
-
-        if (flags != RS_HIPRI)
-                rp_fatal("dlokack:  DL_OK_ACK was not M_PCPROTO");
-
-        if (ctl.len < sizeof (dl_ok_ack_t)) {
-		char buffer[256]; 
-		sprintf(buffer, "dlokack:  short response ctl.len:  %d", ctl.len);
-		rp_fatal(buffer); 
-	}
-}
-
-void dlbindack(int fd, char *bufp)
-{
-        union   DL_primitives   *dlp;
-        struct  strbuf  ctl;
-        int     flags;
-
-        ctl.maxlen = MAXDLBUF;
-        ctl.len = 0;
-        ctl.buf = bufp;
-
-        strgetmsg(fd, &ctl, (struct strbuf*)NULL, &flags, "dlbindack");
-
-        dlp = (union DL_primitives *) ctl.buf;
-
-        expecting(DL_BIND_ACK, dlp);
-
-        if (flags != RS_HIPRI)
-                rp_fatal("dlbindack:  DL_OK_ACK was not M_PCPROTO");
-
-        if (ctl.len < sizeof (dl_bind_ack_t)) {
-		char buffer[256];
-		sprintf(buffer, "dlbindack:  short response ctl.len:  %d", ctl.len);
-		rp_fatal(buffer); 
-	}
-}
-
-int strioctl(int fd, int cmd, int timout, int len, char *dp)
-{
-        struct  strioctl        sioc;
-        int     rc;
-
-        sioc.ic_cmd = cmd;
-        sioc.ic_timout = timout;
-        sioc.ic_len = len;
-        sioc.ic_dp = dp;
-        rc = ioctl(fd, I_STR, &sioc);
-
-        if (rc < 0)
-                return (rc);
-        else
-                return (sioc.ic_len);
-}
-
-void strgetmsg(int fd, struct strbuf *ctlp, struct strbuf *datap, int *flagsp, char *caller)
-{
-        int     rc;
-        static  char    errmsg[80];
-
-        /*
-         * Start timer.
-         */
-        (void) signal(SIGALRM, sigalrm);
-        if (alarm(MAXWAIT) < 0) {
-                (void) sprintf(errmsg, "%s:  alarm", caller);
-                fatalSys(errmsg);
-        }
-
-        /*
-         * Set flags argument and issue getmsg().
-         */
-        *flagsp = 0;
-        if ((rc = getmsg(fd, ctlp, datap, flagsp)) < 0) {
-                (void) sprintf(errmsg, "%s:  getmsg", caller);
-                fatalSys(errmsg);
-        }
-
-        /*
-         * Stop timer.
-         */
-        if (alarm(0) < 0) {
-                (void) sprintf(errmsg, "%s:  alarm", caller);
-                fatalSys(errmsg);
-        }
-
-        /*
-         * Check for MOREDATA and/or MORECTL.
-         */
-        if ((rc & (MORECTL | MOREDATA)) == (MORECTL | MOREDATA)) {
-		char buffer[256]; 
-		sprintf(buffer, "%s:  MORECTL|MOREDATA", caller);
-		rp_fatal(buffer);
-	}
-                
-        if (rc & MORECTL) {
-		char buffer[256];
-		sprintf(buffer, "%s:  MORECTL", caller);
-		rp_fatal(buffer); 
-	}
-        
-        if (rc & MOREDATA) {
-		char buffer[256]; 
-		sprintf(buffer, "%s:  MOREDATA", caller);
-		rp_fatal(buffer);
-	}
-
-        /*
-         * Check for at least sizeof (long) control data portion.
-         */
-        if (ctlp->len < sizeof (long)) {
-		char buffer[256]; 
-		sprintf(buffer, "getmsg:  control portion length < sizeof (long):  %d", ctlp->len);
-		rp_fatal(buffer); 
-	}
-}
-
-void sigalrm(int sig)
-{
-        (void) rp_fatal("sigalrm:  TIMEOUT");
-}
-
-void expecting(int prim, union DL_primitives *dlp)
-{
-        if (dlp->dl_primitive != (u_long)prim) {
-		char buffer[256]; 
-		sprintf(buffer, "expected %s got %s", dlprim(prim), dlprim(dlp->dl_primitive));
-		rp_fatal(buffer); 
-		exit(1); 
-	}
-}
-
-char *dlprim(u_long prim)
-{
-        static  char    primbuf[80];
-
-        switch ((int)prim) {
-                CASERET(DL_INFO_REQ);
-                CASERET(DL_INFO_ACK);
-                CASERET(DL_ATTACH_REQ);
-                CASERET(DL_DETACH_REQ);
-                CASERET(DL_BIND_REQ);
-                CASERET(DL_BIND_ACK);
-                CASERET(DL_UNBIND_REQ);
-                CASERET(DL_OK_ACK);
-                CASERET(DL_ERROR_ACK);
-                CASERET(DL_SUBS_BIND_REQ);
-                CASERET(DL_SUBS_BIND_ACK);
-                CASERET(DL_UNITDATA_REQ);
-                CASERET(DL_UNITDATA_IND);
-                CASERET(DL_UDERROR_IND);
-                CASERET(DL_UDQOS_REQ);
-                CASERET(DL_CONNECT_REQ);
-                CASERET(DL_CONNECT_IND);
-                CASERET(DL_CONNECT_RES);
-                CASERET(DL_CONNECT_CON);
-                CASERET(DL_TOKEN_REQ);
-                CASERET(DL_TOKEN_ACK);
-                CASERET(DL_DISCONNECT_REQ);
-                CASERET(DL_DISCONNECT_IND);
-                CASERET(DL_RESET_REQ);
-                CASERET(DL_RESET_IND);
-                CASERET(DL_RESET_RES);
-                CASERET(DL_RESET_CON);
-                default:
-                        (void) sprintf(primbuf, "unknown primitive 0x%lx", prim);
-                        return (primbuf);
-        }
-}
-
-#endif /* USE_DLPI */
diff --git a/mdk-stage1/rp-pppoe/src/install-sh b/mdk-stage1/rp-pppoe/src/install-sh
deleted file mode 100755
index 58719246f..000000000
--- a/mdk-stage1/rp-pppoe/src/install-sh
+++ /dev/null
@@ -1,238 +0,0 @@
-#! /bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0
diff --git a/mdk-stage1/rp-pppoe/src/md5.c b/mdk-stage1/rp-pppoe/src/md5.c
deleted file mode 100644
index 5b7a0d7b2..000000000
--- a/mdk-stage1/rp-pppoe/src/md5.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * This code implements the MD5 message-digest algorithm.
- * The algorithm is due to Ron Rivest.  This code was
- * written by Colin Plumb in 1993, no copyright is claimed.
- * This code is in the public domain; do with it what you wish.
- *
- * Equivalent code is available from RSA Data Security, Inc.
- * This code has been tested against that, and is equivalent,
- * except that you don't need to include two pages of legalese
- * with every copy.
- *
- * To compute the message digest of a chunk of bytes, declare an
- * MD5Context structure, pass it to MD5Init, call MD5Update as
- * needed on buffers full of bytes, and then call MD5Final, which
- * will fill a supplied 16-byte array with the digest.
- */
-#include <string.h>		/* for memcpy() */
-#include "md5.h"
-
-void byteReverse(unsigned char *buf, unsigned longs);
-
-/*
- * Note: this code is harmless on little-endian machines.
- */
-void byteReverse(unsigned char *buf, unsigned longs)
-{
-    uint32 t;
-    do {
-	t = (uint32) ((unsigned) buf[3] << 8 | buf[2]) << 16 |
-	    ((unsigned) buf[1] << 8 | buf[0]);
-	*(uint32 *) buf = t;
-	buf += 4;
-    } while (--longs);
-}
-
-/*
- * Start MD5 accumulation.  Set bit count to 0 and buffer to mysterious
- * initialization constants.
- */
-void MD5Init(struct MD5Context *ctx)
-{
-    ctx->buf[0] = 0x67452301;
-    ctx->buf[1] = 0xefcdab89;
-    ctx->buf[2] = 0x98badcfe;
-    ctx->buf[3] = 0x10325476;
-
-    ctx->bits[0] = 0;
-    ctx->bits[1] = 0;
-}
-
-/*
- * Update context to reflect the concatenation of another buffer full
- * of bytes.
- */
-void MD5Update(struct MD5Context *ctx, unsigned char const *buf, unsigned len)
-{
-    uint32 t;
-
-    /* Update bitcount */
-
-    t = ctx->bits[0];
-    if ((ctx->bits[0] = t + ((uint32) len << 3)) < t)
-	ctx->bits[1]++;		/* Carry from low to high */
-    ctx->bits[1] += len >> 29;
-
-    t = (t >> 3) & 0x3f;	/* Bytes already in shsInfo->data */
-
-    /* Handle any leading odd-sized chunks */
-
-    if (t) {
-	unsigned char *p = (unsigned char *) ctx->in + t;
-
-	t = 64 - t;
-	if (len < t) {
-	    memcpy(p, buf, len);
-	    return;
-	}
-	memcpy(p, buf, t);
-	byteReverse(ctx->in, 16);
-	MD5Transform(ctx->buf, (uint32 *) ctx->in);
-	buf += t;
-	len -= t;
-    }
-    /* Process data in 64-byte chunks */
-
-    while (len >= 64) {
-	memcpy(ctx->in, buf, 64);
-	byteReverse(ctx->in, 16);
-	MD5Transform(ctx->buf, (uint32 *) ctx->in);
-	buf += 64;
-	len -= 64;
-    }
-
-    /* Handle any remaining bytes of data. */
-
-    memcpy(ctx->in, buf, len);
-}
-
-/*
- * Final wrapup - pad to 64-byte boundary with the bit pattern 
- * 1 0* (64-bit count of bits processed, MSB-first)
- */
-void MD5Final(unsigned char digest[16], struct MD5Context *ctx)
-{
-    unsigned count;
-    unsigned char *p;
-
-    /* Compute number of bytes mod 64 */
-    count = (ctx->bits[0] >> 3) & 0x3F;
-
-    /* Set the first char of padding to 0x80.  This is safe since there is
-       always at least one byte free */
-    p = ctx->in + count;
-    *p++ = 0x80;
-
-    /* Bytes of padding needed to make 64 bytes */
-    count = 64 - 1 - count;
-
-    /* Pad out to 56 mod 64 */
-    if (count < 8) {
-	/* Two lots of padding:  Pad the first block to 64 bytes */
-	memset(p, 0, count);
-	byteReverse(ctx->in, 16);
-	MD5Transform(ctx->buf, (uint32 *) ctx->in);
-
-	/* Now fill the next block with 56 bytes */
-	memset(ctx->in, 0, 56);
-    } else {
-	/* Pad block to 56 bytes */
-	memset(p, 0, count - 8);
-    }
-    byteReverse(ctx->in, 14);
-
-    /* Append length in bits and transform */
-    ((uint32 *) ctx->in)[14] = ctx->bits[0];
-    ((uint32 *) ctx->in)[15] = ctx->bits[1];
-
-    MD5Transform(ctx->buf, (uint32 *) ctx->in);
-    byteReverse((unsigned char *) ctx->buf, 4);
-    memcpy(digest, ctx->buf, 16);
-    memset(ctx, 0, sizeof(ctx));	/* In case it's sensitive */
-}
-
-#ifndef ASM_MD5
-
-/* The four core functions - F1 is optimized somewhat */
-
-/* #define F1(x, y, z) (x & y | ~x & z) */
-#define F1(x, y, z) (z ^ (x & (y ^ z)))
-#define F2(x, y, z) F1(z, x, y)
-#define F3(x, y, z) (x ^ y ^ z)
-#define F4(x, y, z) (y ^ (x | ~z))
-
-/* This is the central step in the MD5 algorithm. */
-#define MD5STEP(f, w, x, y, z, data, s) \
-	( w += f(x, y, z) + data,  w = w<<s | w>>(32-s),  w += x )
-
-/*
- * The core of the MD5 algorithm, this alters an existing MD5 hash to
- * reflect the addition of 16 longwords of new data.  MD5Update blocks
- * the data and converts bytes into longwords for this routine.
- */
-void MD5Transform(uint32 buf[4], uint32 const in[16])
-{
-    register uint32 a, b, c, d;
-
-    a = buf[0];
-    b = buf[1];
-    c = buf[2];
-    d = buf[3];
-
-    MD5STEP(F1, a, b, c, d, in[0] + 0xd76aa478, 7);
-    MD5STEP(F1, d, a, b, c, in[1] + 0xe8c7b756, 12);
-    MD5STEP(F1, c, d, a, b, in[2] + 0x242070db, 17);
-    MD5STEP(F1, b, c, d, a, in[3] + 0xc1bdceee, 22);
-    MD5STEP(F1, a, b, c, d, in[4] + 0xf57c0faf, 7);
-    MD5STEP(F1, d, a, b, c, in[5] + 0x4787c62a, 12);
-    MD5STEP(F1, c, d, a, b, in[6] + 0xa8304613, 17);
-    MD5STEP(F1, b, c, d, a, in[7] + 0xfd469501, 22);
-    MD5STEP(F1, a, b, c, d, in[8] + 0x698098d8, 7);
-    MD5STEP(F1, d, a, b, c, in[9] + 0x8b44f7af, 12);
-    MD5STEP(F1, c, d, a, b, in[10] + 0xffff5bb1, 17);
-    MD5STEP(F1, b, c, d, a, in[11] + 0x895cd7be, 22);
-    MD5STEP(F1, a, b, c, d, in[12] + 0x6b901122, 7);
-    MD5STEP(F1, d, a, b, c, in[13] + 0xfd987193, 12);
-    MD5STEP(F1, c, d, a, b, in[14] + 0xa679438e, 17);
-    MD5STEP(F1, b, c, d, a, in[15] + 0x49b40821, 22);
-
-    MD5STEP(F2, a, b, c, d, in[1] + 0xf61e2562, 5);
-    MD5STEP(F2, d, a, b, c, in[6] + 0xc040b340, 9);
-    MD5STEP(F2, c, d, a, b, in[11] + 0x265e5a51, 14);
-    MD5STEP(F2, b, c, d, a, in[0] + 0xe9b6c7aa, 20);
-    MD5STEP(F2, a, b, c, d, in[5] + 0xd62f105d, 5);
-    MD5STEP(F2, d, a, b, c, in[10] + 0x02441453, 9);
-    MD5STEP(F2, c, d, a, b, in[15] + 0xd8a1e681, 14);
-    MD5STEP(F2, b, c, d, a, in[4] + 0xe7d3fbc8, 20);
-    MD5STEP(F2, a, b, c, d, in[9] + 0x21e1cde6, 5);
-    MD5STEP(F2, d, a, b, c, in[14] + 0xc33707d6, 9);
-    MD5STEP(F2, c, d, a, b, in[3] + 0xf4d50d87, 14);
-    MD5STEP(F2, b, c, d, a, in[8] + 0x455a14ed, 20);
-    MD5STEP(F2, a, b, c, d, in[13] + 0xa9e3e905, 5);
-    MD5STEP(F2, d, a, b, c, in[2] + 0xfcefa3f8, 9);
-    MD5STEP(F2, c, d, a, b, in[7] + 0x676f02d9, 14);
-    MD5STEP(F2, b, c, d, a, in[12] + 0x8d2a4c8a, 20);
-
-    MD5STEP(F3, a, b, c, d, in[5] + 0xfffa3942, 4);
-    MD5STEP(F3, d, a, b, c, in[8] + 0x8771f681, 11);
-    MD5STEP(F3, c, d, a, b, in[11] + 0x6d9d6122, 16);
-    MD5STEP(F3, b, c, d, a, in[14] + 0xfde5380c, 23);
-    MD5STEP(F3, a, b, c, d, in[1] + 0xa4beea44, 4);
-    MD5STEP(F3, d, a, b, c, in[4] + 0x4bdecfa9, 11);
-    MD5STEP(F3, c, d, a, b, in[7] + 0xf6bb4b60, 16);
-    MD5STEP(F3, b, c, d, a, in[10] + 0xbebfbc70, 23);
-    MD5STEP(F3, a, b, c, d, in[13] + 0x289b7ec6, 4);
-    MD5STEP(F3, d, a, b, c, in[0] + 0xeaa127fa, 11);
-    MD5STEP(F3, c, d, a, b, in[3] + 0xd4ef3085, 16);
-    MD5STEP(F3, b, c, d, a, in[6] + 0x04881d05, 23);
-    MD5STEP(F3, a, b, c, d, in[9] + 0xd9d4d039, 4);
-    MD5STEP(F3, d, a, b, c, in[12] + 0xe6db99e5, 11);
-    MD5STEP(F3, c, d, a, b, in[15] + 0x1fa27cf8, 16);
-    MD5STEP(F3, b, c, d, a, in[2] + 0xc4ac5665, 23);
-
-    MD5STEP(F4, a, b, c, d, in[0] + 0xf4292244, 6);
-    MD5STEP(F4, d, a, b, c, in[7] + 0x432aff97, 10);
-    MD5STEP(F4, c, d, a, b, in[14] + 0xab9423a7, 15);
-    MD5STEP(F4, b, c, d, a, in[5] + 0xfc93a039, 21);
-    MD5STEP(F4, a, b, c, d, in[12] + 0x655b59c3, 6);
-    MD5STEP(F4, d, a, b, c, in[3] + 0x8f0ccc92, 10);
-    MD5STEP(F4, c, d, a, b, in[10] + 0xffeff47d, 15);
-    MD5STEP(F4, b, c, d, a, in[1] + 0x85845dd1, 21);
-    MD5STEP(F4, a, b, c, d, in[8] + 0x6fa87e4f, 6);
-    MD5STEP(F4, d, a, b, c, in[15] + 0xfe2ce6e0, 10);
-    MD5STEP(F4, c, d, a, b, in[6] + 0xa3014314, 15);
-    MD5STEP(F4, b, c, d, a, in[13] + 0x4e0811a1, 21);
-    MD5STEP(F4, a, b, c, d, in[4] + 0xf7537e82, 6);
-    MD5STEP(F4, d, a, b, c, in[11] + 0xbd3af235, 10);
-    MD5STEP(F4, c, d, a, b, in[2] + 0x2ad7d2bb, 15);
-    MD5STEP(F4, b, c, d, a, in[9] + 0xeb86d391, 21);
-
-    buf[0] += a;
-    buf[1] += b;
-    buf[2] += c;
-    buf[3] += d;
-}
-
-#endif
diff --git a/mdk-stage1/rp-pppoe/src/md5.h b/mdk-stage1/rp-pppoe/src/md5.h
deleted file mode 100644
index e264f686d..000000000
--- a/mdk-stage1/rp-pppoe/src/md5.h
+++ /dev/null
@@ -1,27 +0,0 @@
-#ifndef MD5_H
-#define MD5_H
-
-#ifdef __alpha
-typedef unsigned int uint32;
-#else
-typedef unsigned long uint32;
-#endif
-
-struct MD5Context {
-	uint32 buf[4];
-	uint32 bits[2];
-	unsigned char in[64];
-};
-
-void MD5Init(struct MD5Context *context);
-void MD5Update(struct MD5Context *context, unsigned char const *buf,
-	       unsigned len);
-void MD5Final(unsigned char digest[16], struct MD5Context *context);
-void MD5Transform(uint32 buf[4], uint32 const in[16]);
-
-/*
- * This is needed to make RSAREF happy on some MS-DOS compilers.
- */
-typedef struct MD5Context MD5_CTX;
-
-#endif /* !MD5_H */
diff --git a/mdk-stage1/rp-pppoe/src/plugin.c b/mdk-stage1/rp-pppoe/src/plugin.c
deleted file mode 100644
index d1097e291..000000000
--- a/mdk-stage1/rp-pppoe/src/plugin.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/***********************************************************************
-*
-* plugin.c
-*
-* pppd plugin for kernel-mode PPPoE on Linux
-*
-* Copyright (C) 2001 by Roaring Penguin Software Inc., Michal Ostrowski
-* and Jamal Hadi Salim.
-* 
-* Much code and many ideas derived from pppoe plugin by Michal
-* Ostrowski and Jamal Hadi Salim, which carries this copyright:
-*
-* Copyright 2000 Michal Ostrowski <mostrows@styx.uwaterloo.ca>,
-*                Jamal Hadi Salim <hadi@cyberus.ca>
-* Borrows heavily from the PPPoATM plugin by Mitchell Blank Jr., 
-* which is based in part on work from Jens Axboe and Paul Mackerras.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version
-* 2 of the License, or (at your option) any later version.
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#define _GNU_SOURCE 1
-#include "pppoe.h"
-
-#include "pppd/pppd.h"
-#include "pppd/fsm.h"
-#include "pppd/lcp.h"
-#include "pppd/ipcp.h"
-#include "pppd/ccp.h"
-#include "pppd/pathnames.h"
-
-#include <linux/types.h>
-#include <syslog.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <net/ethernet.h>
-#include <net/if_arp.h>
-#include <linux/if_pppox.h>
-
-/* From sys-linux.c in pppd -- MUST FIX THIS! */
-extern int new_style_driver;
-
-static char *service = NULL;
-static char *acName = NULL;
-static char *existingSession = NULL;
-
-static option_t Options[] = {
-    { "rp_pppoe_service", o_string, &service,
-      "Desired PPPoE service name" },
-    { "rp_pppoe_ac",      o_string, &acName,
-      "Desired PPPoE access concentrator name" },
-    { "rp_pppoe_sess",    o_string, &existingSession,
-      "Attach to existing session (sessid:macaddr)" },
-    { NULL }
-};
-int (*OldDevnameHook)(const char *name) = NULL;
-static PPPoEConnection *conn = NULL;
-
-/**********************************************************************
- * %FUNCTION: PPPOEInitDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * 
- * %DESCRIPTION:
- * Initializes PPPoE device.
- ***********************************************************************/
-static int
-PPPOEInitDevice(void)
-{
-    conn = malloc(sizeof(PPPoEConnection));
-    if (!conn) {
-	fatal("Could not allocate memory for PPPoE session");
-    }
-    memset(conn, 0, sizeof(PPPoEConnection));
-    if (acName) {
-	SET_STRING(conn->acName, acName);
-    }
-    if (service) {
-	SET_STRING(conn->serviceName, acName);
-    }
-    SET_STRING(conn->ifName, devnam);
-    conn->discoverySocket = -1;
-    conn->sessionSocket = -1;
-    conn->useHostUniq = 1;
-    return 1;
-}
-
-/**********************************************************************
- * %FUNCTION: PPPOEConnectDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Non-negative if all goes well; -1 otherwise
- * %DESCRIPTION:
- * Connects PPPoE device.
- ***********************************************************************/
-static int
-PPPOEConnectDevice(void)
-{
-    struct sockaddr_pppox sp;
-
-    strlcpy(ppp_devnam, devnam, sizeof(ppp_devnam));
-    if (existingSession) {
-	unsigned int mac[ETH_ALEN];
-	int i, ses;
-	if (sscanf(existingSession, "%d:%x:%x:%x:%x:%x:%x",
-		   &ses, &mac[0], &mac[1], &mac[2],
-		   &mac[3], &mac[4], &mac[5]) != 7) {
-	    fatal("Illegal value for rp_pppoe_sess option");
-	}
-	conn->session = htons(ses);
-	for (i=0; i<ETH_ALEN; i++) {
-	    conn->peerEth[i] = (unsigned char) mac[i];
-	}
-    } else {
-	discovery(conn);
-	if (conn->discoveryState != STATE_SESSION) {
-	    fatal("Unable to complete PPPoE Discovery");
-	}
-    }
-
-    /* Make the session socket */
-    conn->sessionSocket = socket(AF_PPPOX, SOCK_STREAM, PX_PROTO_OE);
-    if (conn->sessionSocket < 0) {
-	fatal("Failed to create PPPoE socket: %m");
-    }
-    sp.sa_family = AF_PPPOX;
-    sp.sa_protocol = PX_PROTO_OE;
-    sp.sa_addr.pppoe.sid = conn->session;
-    memcpy(sp.sa_addr.pppoe.dev, conn->ifName, IFNAMSIZ);
-    memcpy(sp.sa_addr.pppoe.remote, conn->peerEth, ETH_ALEN);
-    if (connect(conn->sessionSocket, (struct sockaddr *) &sp,
-		sizeof(struct sockaddr_pppox)) < 0) {
-	fatal("Failed to connect PPPoE socket: %d %m", errno);
-	return -1;
-    }
-    return conn->sessionSocket;
-}
-
-static void
-PPPOESendConfig(int unit, 
-		int mtu, 
-		u_int32_t asyncmap, 
-		int pcomp, 
-		int accomp)
-{
-    int sock;
-    struct ifreq ifr;
-    
-    if (mtu > MAX_PPPOE_MTU) {
-	warn("Couldn't increase MTU to %d", mtu);
-    }
-    sock = socket(AF_INET, SOCK_DGRAM, 0);
-    if (sock < 0) {
-	fatal("Couldn't create IP socket: %m");
-    }
-    strlcpy(ifr.ifr_name, ifname, sizeof(ifr.ifr_name));
-    ifr.ifr_mtu = mtu;
-    if (ioctl(sock, SIOCSIFMTU, &ifr) < 0) {
-	fatal("ioctl(SIOCSIFMTU): %m");
-    }
-    (void) close (sock);
-}
-
-
-static void
-PPPOERecvConfig(int unit, 
-		int mru, 
-		u_int32_t asyncmap, 
-		int pcomp, 
-		int accomp)
-{
-    if (mru > MAX_PPPOE_MTU) {
-	error("Couldn't increase MRU to %d", mru);
-    }
-}
-
-static void
-PPPOESetXaccm(int unit,
-	      ext_accm accm)
-{
-    /* Do nothing */
-}
-
-/**********************************************************************
- * %FUNCTION: PPPOEDisconnectDevice
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Nothing
- * %DESCRIPTION:
- * Disconnects PPPoE device
- ***********************************************************************/
-static void
-PPPOEDisconnectDevice(void)
-{
-    struct sockaddr_pppox sp;
-
-    sp.sa_family = AF_PPPOX;
-    sp.sa_protocol = PX_PROTO_OE;
-    sp.sa_addr.pppoe.sid = 0;
-    memcpy(sp.sa_addr.pppoe.dev, conn->ifName, IFNAMSIZ);
-    memcpy(sp.sa_addr.pppoe.remote, conn->peerEth, ETH_ALEN);
-    if (connect(conn->sessionSocket, (struct sockaddr *) &sp,
-		sizeof(struct sockaddr_pppox)) < 0) {
-	fatal("Failed to disconnect PPPoE socket: %d %m", errno);
-	return;
-    }
-    close(conn->sessionSocket);
-}
-
-static int
-PPPOESetSpeed(const char *speed)
-{
-    return 0;
-}
-
-static void
-PPPOEDeviceCheckHook(void)
-{
-    if (!options_for_dev(_PATH_ETHOPT, devnam)) {
-	exit(EXIT_OPTION_ERROR);
-    }
-}
-
-/**********************************************************************
- * %FUNCTION: PPPoEDevnameHook
- * %ARGUMENTS:
- * name -- name of device
- * %RETURNS:
- * 1 if we will handle this device; 0 otherwise.
- * %DESCRIPTION:
- * Checks if name is a valid interface name; if so, returns 1.  Also
- * sets up devnam (string representation of device) and sets devstat.st_mode
- * so S_ISCHR(devstat.st_mode) != 1 for internal pppd consumption.
- ***********************************************************************/
-static int
-PPPoEDevnameHook(const char *name)
-{
-    int r = 1;
-    int fd;
-    struct ifreq ifr;
-
-    /* Open a socket */
-    if ((fd = socket(PF_PACKET, SOCK_RAW, 0)) < 0) {
-	r = 0;
-    }
-
-    /* Try getting interface index */
-    if (r) {
-	strncpy(ifr.ifr_name, name, sizeof(ifr.ifr_name));
-	if (ioctl(fd, SIOCGIFINDEX, &ifr) < 0) {
-	    r = 0;
-	} else {
-	    if (ioctl(fd, SIOCGIFHWADDR, &ifr) < 0) {
-		r = 0;
-	    } else {
-		if (ifr.ifr_hwaddr.sa_family != ARPHRD_ETHER) {
-		    error("Interface %s not Ethernet", name);
-		    r=0;
-		}
-	    }
-	}
-    }
-
-    /* Close socket */
-    close(fd);
-    if (r) {
-	strncpy(devnam, name, sizeof(devnam));
-	if (device_check_hook != PPPOEDeviceCheckHook) {
-	    devstat.st_mode = S_IFSOCK;
-	    device_init_hook = PPPOEInitDevice;
-	    setspeed_hook = PPPOESetSpeed;
-	    device_check_hook = PPPOEDeviceCheckHook;
-	    connect_device_hook = PPPOEConnectDevice;
-	    disconnect_device_hook = PPPOEDisconnectDevice;
-	    send_config_hook = PPPOESendConfig;
-	    recv_config_hook = PPPOERecvConfig;
-	    set_xaccm_hook = PPPOESetXaccm;
-	    modem = 0;
-	    
-	    lcp_allowoptions[0].neg_accompression = 0;
-	    lcp_wantoptions[0].neg_accompression = 0;
-	    
-	    lcp_allowoptions[0].neg_asyncmap = 0;
-	    lcp_wantoptions[0].neg_asyncmap = 0;
-	    
-	    lcp_allowoptions[0].neg_pcompression = 0;
-	    lcp_wantoptions[0].neg_pcompression = 0;
-	    
-	    ccp_allowoptions[0].deflate = 0 ;
-	    ccp_wantoptions[0].deflate = 0 ;
-	    
-	    ipcp_allowoptions[0].neg_vj=0;
-	    ipcp_wantoptions[0].neg_vj=0;
-	    
-	    ccp_allowoptions[0].bsd_compress = 0;
-	    ccp_wantoptions[0].bsd_compress = 0;
-	    
-	    PPPOEInitDevice();
-	}
-	return 1;
-    }
-
-    if (OldDevnameHook) r = OldDevnameHook(name);
-    return r;
-}
-
-/**********************************************************************
- * %FUNCTION: plugin_init
- * %ARGUMENTS:
- * None
- * %RETURNS:
- * Nothing
- * %DESCRIPTION:
- * Initializes hooks for pppd plugin
- ***********************************************************************/
-void
-plugin_init(void)
-{
-    if (!new_style_driver) {
-	fatal("Linux kernel does not support PPPoE -- are you running 2.4.x?");
-    }
-    OldDevnameHook = setdevname_hook;
-    setdevname_hook = PPPoEDevnameHook;
-    add_options(Options);
-
-    info("Roaring Penguin PPPoE Plugin Initialized");
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[1024];
-    int i = errno;
-    sprintf(buf, "%.256s: %.256s", str, strerror(i));
-    printErr(buf);
-    sprintf(buf, "RP-PPPoE: %.256s: %.256s", str, strerror(i));
-    sendPADT(conn, buf);
-    exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    char buf[1024];
-    printErr(str);
-    sprintf(buf, "RP-PPPoE: %.256s", str);
-    sendPADT(conn, buf);
-    exit(1);
-}
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    rp_fatal(str);
-}
diff --git a/mdk-stage1/rp-pppoe/src/ppp.c b/mdk-stage1/rp-pppoe/src/ppp.c
deleted file mode 100644
index 72020a76c..000000000
--- a/mdk-stage1/rp-pppoe/src/ppp.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/***********************************************************************
-*
-* ppp.c
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Functions for talking to PPP daemon
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_N_HDLC
-#ifndef N_HDLC
-#include <linux/termios.h>
-#endif
-#endif
-
-int PPPState;
-int PPPPacketSize;
-unsigned char PPPXorValue;
-
-UINT16_t fcstab[256] = {
-    0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-    0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-    0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-    0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-    0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-    0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-    0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-    0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-    0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-    0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-    0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-    0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-    0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-    0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-    0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-    0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-    0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-    0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-    0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-    0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-    0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-    0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-    0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-    0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-    0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-    0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-    0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-    0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-    0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-    0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-    0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-    0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-/**********************************************************************
-*%FUNCTION: syncReadFromPPP
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* packet -- buffer in which to place PPPoE packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads from a synchronous PPP device and builds and transmits a PPPoE
-* packet
-***********************************************************************/
-void
-syncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet)
-{
-    int r;
-#ifndef HAVE_N_HDLC
-    struct iovec vec[2];
-    unsigned char dummy[2];
-    vec[0].iov_base = (void *) dummy;
-    vec[0].iov_len = 2;
-    vec[1].iov_base = (void *) packet->payload;
-    vec[1].iov_len = ETH_DATA_LEN - PPPOE_OVERHEAD;
-
-    /* Use scatter-read to throw away the PPP frame address bytes */
-    r = readv(0, vec, 2);
-#else
-    /* Bloody hell... readv doesn't work with N_HDLC line discipline... GRR! */
-    unsigned char buf[ETH_DATA_LEN - PPPOE_OVERHEAD + 2];
-    r = read(0, buf, ETH_DATA_LEN - PPPOE_OVERHEAD + 2);
-    if (r >= 2) {
-	memcpy(packet->payload, buf+2, r-2);
-    }
-#endif
-    if (r < 0) {
-	/* Catch the Linux "select" bug */
-	if (errno == EAGAIN) {
-	    rp_fatal("Linux select bug hit!  This message is harmless, but please ask the Linux kernel developers to fix it.");
-	}
-	fatalSys("read (syncReadFromPPP)");
-    }
-    if (r == 0) {
-	syslog(LOG_INFO, "end-of-file in syncReadFromPPP");
-	sendPADT(conn, "RP-PPPoE: EOF in syncReadFromPPP");
-	exit(0);
-    }
-
-    if (r < 2) {
-	rp_fatal("too few characters read from PPP (syncReadFromPPP)");
-    }
-    
-    sendSessionPacket(conn, packet, r-2);
-}
-
-/**********************************************************************
-*%FUNCTION: initPPP
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes the PPP state machine
-***********************************************************************/
-void
-initPPP(void)
-{
-    PPPState = STATE_WAITFOR_FRAME_ADDR;
-    PPPPacketSize = 0;
-    PPPXorValue = 0;
-
-}
-/**********************************************************************
-*%FUNCTION: asyncReadFromPPP
-*%ARGUMENTS:
-* conn -- PPPoEConnection structure
-* packet -- buffer in which to place PPPoE packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads from an async PPP device and builds a PPPoE packet to transmit
-***********************************************************************/
-void
-asyncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet)
-{
-    unsigned char buf[READ_CHUNK];
-    unsigned char *ptr = buf;
-    unsigned char c;
-
-    int r;
-
-    r = read(0, buf, READ_CHUNK);
-    if (r < 0) {
-	fatalSys("read (asyncReadFromPPP)");
-    }
-
-    if (r == 0) {
-	syslog(LOG_INFO, "end-of-file in asyncReadFromPPP");
-	sendPADT(conn, "RP-PPPoE: EOF in asyncReadFromPPP");
-	exit(0);
-    }
-
-    while(r) {
-	if (PPPState == STATE_WAITFOR_FRAME_ADDR) {
-	    while(r) {
-		--r;
-		if (*ptr++ == FRAME_ADDR) {
-		    PPPState = STATE_DROP_PROTO;
-		    break;
-		}
-	    }
-	}
-	
-	/* Still waiting... */
-	if (PPPState == STATE_WAITFOR_FRAME_ADDR) return;
-
-	while(r && PPPState == STATE_DROP_PROTO) {
-	    --r;
-	    if (*ptr++ == (FRAME_CTRL ^ FRAME_ENC)) {
-		PPPState = STATE_BUILDING_PACKET;
-	    }
-	}
-
-	if (PPPState == STATE_DROP_PROTO) return;
-
-	/* Start building frame */
-	while(r && PPPState == STATE_BUILDING_PACKET) {
-	    --r;
-	    c = *ptr++;
-	    switch(c) {
-	    case FRAME_ESC:
-		PPPXorValue = FRAME_ENC;
-		break;
-	    case FRAME_FLAG:
-		if (PPPPacketSize < 2) {
-		    rp_fatal("Packet too short from PPP (asyncReadFromPPP)");
-		}
-		sendSessionPacket(conn, packet, PPPPacketSize-2);
-		PPPPacketSize = 0;
-		PPPXorValue = 0;
-		PPPState = STATE_WAITFOR_FRAME_ADDR;
-		break;
-	    default:
-		if (PPPPacketSize >= ETH_DATA_LEN - 4) {
-		    syslog(LOG_ERR, "Packet too big!  Check MTU on PPP interface");
-		    PPPPacketSize = 0;
-		    PPPXorValue = 0;
-		    PPPState = STATE_WAITFOR_FRAME_ADDR;
-		} else {
-		    packet->payload[PPPPacketSize++] = c ^ PPPXorValue;
-		    PPPXorValue = 0;
-		}
-	    }
-	}
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: pppFCS16
-*%ARGUMENTS:
-* fcs -- current fcs
-* cp -- a buffer's worth of data
-* len -- length of buffer "cp"
-*%RETURNS:
-* A new FCS
-*%DESCRIPTION:
-* Updates the PPP FCS.
-***********************************************************************/
-UINT16_t
-pppFCS16(UINT16_t fcs, 
-	 unsigned char * cp, 
-	 int len)
-{
-    while (len--)
-	fcs = (fcs >> 8) ^ fcstab[(fcs ^ *cp++) & 0xff];
-    
-    return (fcs);
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe-server.c b/mdk-stage1/rp-pppoe/src/pppoe-server.c
deleted file mode 100644
index e43e63553..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe-server.c
+++ /dev/null
@@ -1,1247 +0,0 @@
-/***********************************************************************
-*
-* pppoe.h
-*
-* Implementation of a user-space PPPoE server
-*
-* Copyright (C) 2000 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "config.h"
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define _POSIX_SOURCE 1 /* For sigaction defines */
-#endif
-
-#define _BSD_SOURCE 1 /* for gethostname */
-
-#include "pppoe.h"
-#include "md5.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#ifdef HAVE_SYS_WAIT_H
-#include <sys/wait.h>
-#endif
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#include <signal.h>
-
-/* Hack for daemonizing */
-#define CLOSEFD 64
-
-/* Max. 64 sessions by default */
-#define DEFAULT_MAX_SESSIONS 64
-
-/* A list of client sessions */
-struct ClientSession *Sessions = NULL;
-
-/* The number of session slots */
-size_t NumSessionSlots;
-
-/* Offset of first session */
-size_t SessOffset = 0;
-
-/* Socket for client's discovery phases */
-int Socket = -1;
-
-/* Pipe written on reception of SIGCHLD */
-int Pipe[2] = {-1, -1};
-int ReapPending = 0;
-
-/* Synchronous mode */
-int Synchronous = 0;
-
-/* Random seed for cookie generation */
-#define SEED_LEN 16
-#define MD5_LEN 16
-#define COOKIE_LEN (MD5_LEN + sizeof(pid_t)) /* Cookie is 16-byte MD5 + PID of server */
-
-unsigned char CookieSeed[SEED_LEN];
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-char *IfName = NULL;
-
-/* Access concentrator name */
-char *ACName = NULL;
-
-/* Options to pass to pppoe process */
-char PppoeOptions[SMALLBUF] = "";
-
-/* Our local IP address */
-unsigned char LocalIP[IPV4ALEN] = {10, 0, 0, 1};
-unsigned char RemoteIP[IPV4ALEN] = {10, 67, 15, 1}; /* Counter STARTS here */
-
-PPPoETag hostUniq;
-PPPoETag relayId;
-PPPoETag receivedCookie;
-PPPoETag requestedService;
-
-#define HOSTNAMELEN 256
-
-static void startPPPD(struct ClientSession *sess);
-static void sendErrorPADS(int sock, unsigned char *source, unsigned char *dest,
-			  int errorTag, char *errorMsg);
-
-#define CHECK_ROOM(cursor, start, len) \
-do {\
-    if (((cursor)-(start))+(len) > MAX_PPPOE_PAYLOAD) { \
-        syslog(LOG_ERR, "Would create too-long packet"); \
-        return; \
-    } \
-} while(0)
-
-/* Use Linux kernel-mode PPPoE? */
-int UseLinuxKernelModePPPoE = 0;
-
-/**********************************************************************
-*%FUNCTION: parseAddressPool
-*%ARGUMENTS:
-* fname -- name of file containing IP address pool.
-* install -- if true, install IP addresses in sessions.
-*%RETURNS:
-* Number of valid IP addresses found.
-*%DESCRIPTION:
-* Reads a list of IP addresses from a file.
-***********************************************************************/
-static int
-parseAddressPool(char const *fname, int install)
-{
-    FILE *fp = fopen(fname, "r");
-    int numAddrs = 0;
-    unsigned int a, b, c, d;
-
-    if (!fp) {
-	sysErr("Cannot open address pool file");
-    }
-
-    while (!feof(fp)) {
-	if ((fscanf(fp, "%u.%u.%u.%u", &a, &b, &c, &d) == 4) &&
-	    a < 256 && b < 256 && c < 256 && d < 256) {
-	    if (install) {
-		Sessions[numAddrs].ip[0] = (unsigned char) a;
-		Sessions[numAddrs].ip[1] = (unsigned char) b;
-		Sessions[numAddrs].ip[2] = (unsigned char) c;
-		Sessions[numAddrs].ip[3] = (unsigned char) d;
-	    }
-	    numAddrs++;
-	}
-    }
-    if (!numAddrs) {
-	rp_fatal("No valid ip addresses found in pool file");
-    }
-    return numAddrs;
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADITags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADI packet
-***********************************************************************/
-void
-parsePADITags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    switch(type) {
-    case TAG_SERVICE_NAME:
-	/* Should do something -- currently ignored */
-	break;
-    case TAG_RELAY_SESSION_ID:
-	relayId.type = htons(type);
-	relayId.length = htons(len);
-	memcpy(relayId.payload, data, len);
-	break;
-    case TAG_HOST_UNIQ:
-	hostUniq.type = htons(type);
-	hostUniq.length = htons(len);
-	memcpy(hostUniq.payload, data, len);
-	break;
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: parsePADRTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADR packet
-***********************************************************************/
-void
-parsePADRTags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    switch(type) {
-    case TAG_RELAY_SESSION_ID:
-	relayId.type = htons(type);
-	relayId.length = htons(len);
-	memcpy(relayId.payload, data, len);
-	break;
-    case TAG_HOST_UNIQ:
-	hostUniq.type = htons(type);
-	hostUniq.length = htons(len);
-	memcpy(hostUniq.payload, data, len);
-	break;
-    case TAG_AC_COOKIE:
-	receivedCookie.type = htons(type);
-	receivedCookie.length = htons(len);
-	memcpy(receivedCookie.payload, data, len);
-	break;
-    case TAG_SERVICE_NAME:
-	requestedService.type = htons(type);
-	requestedService.length = htons(len);
-	memcpy(requestedService.payload, data, len);
-	break;
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: findSession
-*%ARGUMENTS:
-* pid -- PID of child which owns session.  If PID is 0, searches for
-* empty session slots.
-*%RETURNS:
-* A pointer to the session, or NULL if no such session found.
-*%DESCRIPTION:
-* Searches for specified session.
-**********************************************************************/
-struct ClientSession *
-findSession(pid_t pid)
-{
-    size_t i;
-    for (i=0; i<NumSessionSlots; i++) {
-	if (Sessions[i].pid == pid) {
-	    return &Sessions[i];
-	}
-    }
-    return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: reapSessions
-*%ARGUMENTS:
-* myAddr -- my Ethernet address
-* sock -- my discovery socket
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reaps children which have exited and removes their sessions
-**********************************************************************/
-void
-reapSessions(unsigned char *myAddr, int sock)
-{
-    int status;
-    pid_t pid;
-    struct ClientSession *session;
-
-    /* Temporary structure for sending PADT's. */
-    PPPoEConnection conn;
-    memset(&conn, 0, sizeof(conn));
-
-    /* Initialize fields of conn which do not depend on peer */
-    memcpy(conn.myEth, myAddr, ETH_ALEN);
-    conn.useHostUniq = 0;
-    conn.discoverySocket = sock;
-
-    while((pid = waitpid(-1, &status, WNOHANG)) > 0) {
-	session = findSession(pid);
-	if (!session) {
-	    syslog(LOG_ERR, "Child %d died but couldn't find session!",
-		   (int) pid);
-	} else {
-	    syslog(LOG_INFO,
-		   "Session %d closed for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
-		   ntohs(session->sess),
-		   session->eth[0], session->eth[1], session->eth[2],
-		   session->eth[3], session->eth[4], session->eth[5],
-		   (int) session->ip[0], (int) session->ip[1],
-		   (int) session->ip[2], (int) session->ip[3]);
-	    conn.session = session->sess;
-	    memcpy(conn.peerEth, session->eth, ETH_ALEN);
-	    if (session->recvdPADT) {
-		sendPADT(&conn, "RP-PPPoE: Received PADT from peer");
-	    } else {
-		sendPADT(&conn, "RP-PPPoE: Child pppd process terminated");
-	    }
-	    session->pid = 0;
-	}
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[SMALLBUF];
-    snprintf(buf, SMALLBUF, "%s: %s", str, strerror(errno));
-    printErr(buf);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    printErr(str);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: genCookie
-*%ARGUMENTS:
-* peerEthAddr -- peer Ethernet address (6 bytes)
-* myEthAddr -- my Ethernet address (6 bytes)
-* seed -- random cookie seed to make things tasty (16 bytes)
-* cookie -- buffer which is filled with server PID and 
-*           md5 sum of previous items
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Forms the md5 sum of peer MAC address, our MAC address and seed, useful
-* in a PPPoE Cookie tag.
-***********************************************************************/
-void
-genCookie(unsigned char const *peerEthAddr,
-	  unsigned char const *myEthAddr,
-	  unsigned char const *seed,
-	  unsigned char *cookie)
-{
-    struct MD5Context ctx;
-    pid_t pid = getpid();
-
-    MD5Init(&ctx);
-    MD5Update(&ctx, peerEthAddr, ETH_ALEN);
-    MD5Update(&ctx, myEthAddr, ETH_ALEN);
-    MD5Update(&ctx, seed, SEED_LEN);
-    MD5Final(cookie, &ctx);
-    memcpy(cookie+MD5_LEN, &pid, sizeof(pid));
-}
-
-/**********************************************************************
-*%FUNCTION: processPADI
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADI packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADO packet back to client
-***********************************************************************/
-void
-processPADI(int sock, unsigned char *myAddr,
-	    PPPoEPacket *packet, int len)
-{
-    PPPoEPacket pado;
-    PPPoETag acname;
-    PPPoETag servname;
-    PPPoETag cookie;
-    size_t acname_len;
-    unsigned char *cursor = pado.payload;
-    UINT16_t plen;
-
-    /* Ignore PADI's which don't come from a unicast address */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR, "PADI packet from non-unicast source address");
-	return;
-    }
-
-    acname.type = htons(TAG_AC_NAME);
-    acname_len = strlen(ACName);
-    acname.length = htons(acname_len);
-    memcpy(acname.payload, ACName, acname_len);
-
-    servname.type = htons(TAG_SERVICE_NAME);
-    servname.length = 0;
-
-    relayId.type = 0;
-    hostUniq.type = 0;
-    parsePacket(packet, parsePADITags, NULL);
-
-    /* Generate a cookie */
-    cookie.type = htons(TAG_AC_COOKIE);
-    cookie.length = htons(COOKIE_LEN);
-    genCookie(packet->ethHdr.h_source, myAddr, CookieSeed, cookie.payload);
-
-    /* Construct a PADO packet */
-    memcpy(pado.ethHdr.h_dest, packet->ethHdr.h_source, ETH_ALEN);
-    memcpy(pado.ethHdr.h_source, myAddr, ETH_ALEN);
-    pado.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    pado.ver = 1;
-    pado.type = 1;
-    pado.code = CODE_PADO;
-    pado.session = 0;
-    plen = TAG_HDR_SIZE + acname_len;
-
-    CHECK_ROOM(cursor, pado.payload, acname_len+TAG_HDR_SIZE);
-    memcpy(cursor, &acname, acname_len + TAG_HDR_SIZE);
-    cursor += acname_len + TAG_HDR_SIZE;
-
-    CHECK_ROOM(cursor, pado.payload, TAG_HDR_SIZE);
-    memcpy(cursor, &servname, TAG_HDR_SIZE);
-    cursor += TAG_HDR_SIZE;
-    plen += TAG_HDR_SIZE;
-
-    CHECK_ROOM(cursor, pado.payload, TAG_HDR_SIZE + COOKIE_LEN);
-    memcpy(cursor, &cookie, TAG_HDR_SIZE + COOKIE_LEN);
-    cursor += TAG_HDR_SIZE + COOKIE_LEN;
-    plen += TAG_HDR_SIZE + COOKIE_LEN;
-
-    if (relayId.type) {
-	CHECK_ROOM(cursor, pado.payload, ntohs(relayId.length) + TAG_HDR_SIZE);
-	memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(relayId.length) + TAG_HDR_SIZE;
-    }
-    if (hostUniq.type) {
-	CHECK_ROOM(cursor, pado.payload, ntohs(hostUniq.length)+TAG_HDR_SIZE);
-	memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
-	cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-	plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-    }
-    pado.length = htons(plen);
-    sendPacket(NULL, sock, &pado, (int) (plen + HDR_SIZE));
-}
-
-/**********************************************************************
-*%FUNCTION: processPADT
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADT packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Kills session whose session-ID is in PADT packet.
-***********************************************************************/
-void
-processPADT(int sock, unsigned char *myAddr,
-	    PPPoEPacket *packet, int len)
-{
-    size_t i;
-
-    /* Ignore PADT's not directed at us */
-    if (memcmp(packet->ethHdr.h_dest, myAddr, ETH_ALEN)) return;
-
-    /* Get session's index */
-    i = ntohs(packet->session) - 1 - SessOffset;
-    if (i >= NumSessionSlots) return;
-    if (Sessions[i].sess != packet->session) {
-	syslog(LOG_ERR, "Session index %u doesn't match session number %u",
-	       (unsigned int) i, (unsigned int) ntohs(packet->session));
-	return;
-    }
-    if (Sessions[i].pid) {
-	Sessions[i].recvdPADT = 1;
-	parsePacket(packet, parseLogErrs, NULL);
-	kill(Sessions[i].pid, SIGTERM);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: processPADR
-*%ARGUMENTS:
-* sock -- Ethernet socket
-* myAddr -- my Ethernet address
-* packet -- PPPoE PADR packet
-* len -- length of received packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADS packet back to client and starts a PPP session if PADR
-* packet is OK.
-***********************************************************************/
-void
-processPADR(int sock, unsigned char *myAddr,
-	    PPPoEPacket *packet, int len)
-{
-    unsigned char cookieBuffer[COOKIE_LEN];
-    struct ClientSession *cliSession;
-    pid_t child;
-    PPPoEPacket pads;
-    unsigned char *cursor = pads.payload;
-    UINT16_t plen;
-    PPPoETag servname;
-
-    /* Initialize some globals */
-    relayId.type = 0;
-    hostUniq.type = 0;
-    receivedCookie.type = 0;
-    requestedService.type = 0;
-
-    /* Ignore PADR's not directed at us */
-    if (memcmp(packet->ethHdr.h_dest, myAddr, ETH_ALEN)) return;
-
-    /* Ignore PADR's from non-unicast addresses */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR, "PADR packet from non-unicast source address");
-	return;
-    }
-
-    parsePacket(packet, parsePADRTags, NULL);
-
-    /* Check that everything's cool */
-    if (!receivedCookie.type) {
-	/* Drop it -- do not send error PADS */
-	return;
-    }
-
-    /* Is cookie kosher? */
-    if (receivedCookie.length != htons(COOKIE_LEN)) {
-	/* Drop it -- do not send error PADS */
-	return;
-    }
-
-    genCookie(packet->ethHdr.h_source, myAddr, CookieSeed, cookieBuffer);
-    if (memcmp(receivedCookie.payload, cookieBuffer, COOKIE_LEN)) {
-	/* Drop it -- do not send error PADS */
-	return;
-    }
-
-    /* Check service name -- we only offer service "" */
-    if (!requestedService.type) {
-	syslog(LOG_ERR, "Received PADR packet with no SERVICE_NAME tag");
-	sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
-		      TAG_SERVICE_NAME_ERROR, "RP-PPPoE: Server: No service name tag");
-	return;
-    }
-
-    if (requestedService.length) {
-	syslog(LOG_ERR, "Received PADR packet asking for unsupported service %.*s", (int) ntohs(requestedService.length), requestedService.payload);
-	sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
-		      TAG_SERVICE_NAME_ERROR, "RP-PPPoE: Server: Invalid service name tag");
-	return;
-    }
-
-    /* Looks cool... find a slot for the session */
-    cliSession = findSession(0);
-    if (!cliSession) {
-	syslog(LOG_ERR, "No client slots available (%02x:%02x:%02x:%02x:%02x:%02x)",
-	       (unsigned int) packet->ethHdr.h_source[0],
-	       (unsigned int) packet->ethHdr.h_source[1],
-	       (unsigned int) packet->ethHdr.h_source[2],
-	       (unsigned int) packet->ethHdr.h_source[3],
-	       (unsigned int) packet->ethHdr.h_source[4],
-	       (unsigned int) packet->ethHdr.h_source[5]);
-	sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
-		      TAG_AC_SYSTEM_ERROR, "RP-PPPoE: Server: No client slots available");
-	return;
-    }
-
-    /* Set up client session peer Ethernet address */
-    memcpy(cliSession->eth, packet->ethHdr.h_source, ETH_ALEN);
-    cliSession->recvdPADT = 0;
-
-    /* Create child process, send PADS packet back */
-    child = fork();
-    if (child < 0) {
-	sendErrorPADS(sock, myAddr, packet->ethHdr.h_source,
-		      TAG_AC_SYSTEM_ERROR, "RP-PPPoE: Server: Unable to start session process");
-	return;
-    }
-    if (child != 0) {
-	/* In the parent process.  Mark pid in session slot */
-	cliSession->pid = child;
-	return;
-    }
-
-    /* In the child process.  */
-
-    /* pppd has a nasty habit of killing all processes in its process group.
-       Start a new session to stop pppd from killing us! */
-    setsid();
-
-    /* Send PADS and Start pppd */
-    memcpy(pads.ethHdr.h_dest, packet->ethHdr.h_source, ETH_ALEN);
-    memcpy(pads.ethHdr.h_source, myAddr, ETH_ALEN);
-    pads.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    pads.ver = 1;
-    pads.type = 1;
-    pads.code = CODE_PADS;
-    
-    pads.session = cliSession->sess;
-    plen = 0;
-    
-    servname.type = htons(TAG_SERVICE_NAME);
-    servname.length = 0;
-    
-    memcpy(cursor, &servname, TAG_HDR_SIZE);
-    cursor += TAG_HDR_SIZE;
-    plen += TAG_HDR_SIZE;
-    
-    if (relayId.type) {
-	memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(relayId.length) + TAG_HDR_SIZE;
-    }
-    if (hostUniq.type) {
-	memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
-	cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-	plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-    }
-    pads.length = htons(plen);
-    sendPacket(NULL, sock, &pads, (int) (plen + HDR_SIZE));
-    startPPPD(cliSession);
-}
-
-/**********************************************************************
-*%FUNCTION: childHandler
-*%ARGUMENTS:
-* sig -- signal number
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Called by SIGCHLD.  Writes one byte to Pipe to wake up the select
-* loop and cause reaping of dead sessions
-***********************************************************************/
-void
-childHandler(int sig)
-{
-    if (!ReapPending) {
-	ReapPending = 1;
-	write(Pipe[1], &ReapPending, 1);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- argv[0] from main
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage instructions
-***********************************************************************/
-void
-usage(char const *argv0)
-{
-    fprintf(stderr, "Usage: %s [options]\n", argv0);
-    fprintf(stderr, "Options:\n");
-#ifdef USE_BPF
-    fprintf(stderr, "   -I if_name     -- Specify interface (REQUIRED)\n");
-#else
-    fprintf(stderr, "   -I if_name     -- Specify interface (default %s.)\n",
-	    DEFAULT_IF);
-#endif
-    fprintf(stderr, "   -T timeout     -- Specify inactivity timeout in seconds.\n");
-    fprintf(stderr, "   -C name        -- Set access concentrator name.\n");
-    fprintf(stderr, "   -m MSS         -- Clamp incoming and outgoing MSS options.\n");
-    fprintf(stderr, "   -L ip          -- Set local IP address.\n");
-    fprintf(stderr, "   -R ip          -- Set start address of remote IP pool.\n");
-    fprintf(stderr, "   -p fname       -- Optain IP address pool from specified file.\n");
-    fprintf(stderr, "   -N num         -- Allow 'num' concurrent sessions.\n");
-    fprintf(stderr, "   -o offset      -- Assign session numbers starting at offset+1.\n");
-    fprintf(stderr, "   -f disc:sess   -- Set Ethernet frame types (hex).\n");
-    fprintf(stderr, "   -s             -- Use synchronous PPP mode.\n");
-#ifdef HAVE_LINUX_KERNEL_PPPOE
-    fprintf(stderr, "   -k             -- Use kernel-mode PPPoE.\n");
-#endif
-    fprintf(stderr, "   -h             -- Print usage information.\n\n");
-    fprintf(stderr, "PPPoE-Server Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
-    fprintf(stderr, "PPPoE-Server comes with ABSOLUTELY NO WARRANTY.\n");
-    fprintf(stderr, "This is free software, and you are welcome to redistribute it\n");
-    fprintf(stderr, "under the terms of the GNU General Public License, version 2\n");
-    fprintf(stderr, "or (at your option) any later version.\n");
-    fprintf(stderr, "http://www.roaringpenguin.com\n");
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- usual suspects
-*%RETURNS:
-* Exit status
-*%DESCRIPTION:
-* Main program of PPPoE server
-***********************************************************************/
-int
-main(int argc, char **argv)
-{
-
-    FILE *fp;
-    int i;
-    int opt;
-    unsigned char myAddr[ETH_ALEN];
-    PPPoEPacket packet;
-    int len;
-    int sock;
-    int d[IPV4ALEN];
-    int beDaemon = 1;
-    struct sigaction act;
-    int maxFD;
-    unsigned int discoveryType, sessionType;
-    char *addressPoolFname = NULL;
-
-#ifndef HAVE_LINUX_KERNEL_PPPOE
-    char *options = "hI:C:L:R:T:m:FN:f:o:sp:";
-#else
-    char *options = "hI:C:L:R:T:m:FN:f:o:skp:";
-#endif
-
-    /* Initialize syslog */
-    openlog("pppoe-server", LOG_PID, LOG_DAEMON);
-
-    /* Default number of session slots */
-    NumSessionSlots = DEFAULT_MAX_SESSIONS;
-
-    /* Parse command-line options */
-    while((opt = getopt(argc, argv, options)) != -1) {
-	switch(opt) {
-#ifdef HAVE_LINUX_KERNEL_PPPOE
-	case 'k':
-	    UseLinuxKernelModePPPoE = 1;
-	    break;
-#endif
-	case 'p':
-	    addressPoolFname = optarg;
-	    break;
-	case 's':
-	    Synchronous = 1;
-	    /* Pass the Synchronous option on to pppoe */
-	    snprintf(PppoeOptions + strlen(PppoeOptions),
-		     SMALLBUF-strlen(PppoeOptions),
-		     " -s");
-	    break;
-	case 'f':
-	    if (sscanf(optarg, "%x:%x", &discoveryType, &sessionType) != 2) {
-		fprintf(stderr, "Illegal argument to -f: Should be disc:sess in hex\n");
-		exit(EXIT_FAILURE);
-	    }
-	    Eth_PPPOE_Discovery = (UINT16_t) discoveryType;
-	    Eth_PPPOE_Session   = (UINT16_t) sessionType;
-	    /* This option gets passed to pppoe */
-	    snprintf(PppoeOptions + strlen(PppoeOptions),
-		     SMALLBUF-strlen(PppoeOptions),
-		     " -%c %s", opt, optarg);
-	    break;
-	case 'F':
-	    beDaemon = 0;
-	    break;
-	case 'N':
-	    if (sscanf(optarg, "%d", &opt) != 1) {
-		usage(argv[0]);
-		exit(EXIT_FAILURE);
-	    }
-	    if (opt <= 0) {
-		fprintf(stderr, "-N: Value must be positive\n");
-		exit(EXIT_FAILURE);
-	    }
-	    NumSessionSlots = opt;
-	    break;
-	case 'o':
-	    if (sscanf(optarg, "%d", &opt) != 1) {
-		usage(argv[0]);
-		exit(EXIT_FAILURE);
-	    }
-	    if (opt < 0) {
-		fprintf(stderr, "-o: Value must be non-negative\n");
-		exit(EXIT_FAILURE);
-	    }
-	    SessOffset = (size_t) opt;
-	    break;
-
-	case 'I':
-	    SET_STRING(IfName, optarg);
-	    break;
-	case 'C':
-	    SET_STRING(ACName, optarg);
-	    break;
-	case 'L':
-	case 'R':
-	    /* Get local/remote IP address */
-	    if (sscanf(optarg, "%d.%d.%d.%d", &d[0], &d[1], &d[2], &d[3]) != 4) {
-		usage(argv[0]);
-		exit(EXIT_FAILURE);
-	    }
-	    for (i=0; i<IPV4ALEN; i++) {
-		if (d[i] < 0 || d[i] > 255) {
-		    usage(argv[0]);
-		    exit(EXIT_FAILURE);
-		}
-		if (opt == 'L') {
-		    LocalIP[i] = (unsigned char) d[i];
-		} else {
-		    RemoteIP[i] = (unsigned char) d[i];
-		}
-	    }
-	    break;
-	case 'T':
-	case 'm':
-	    /* These just get passed to pppoe */
-	    snprintf(PppoeOptions + strlen(PppoeOptions),
-		     SMALLBUF-strlen(PppoeOptions),
-		     " -%c %s", opt, optarg);
-	    break;
-	case 'h':
-	    usage(argv[0]);
-	    exit(EXIT_SUCCESS);
-	}
-    }
-    
-#ifdef USE_LINUX_PACKET
-#ifndef HAVE_STRUCT_SOCKADDR_LL
-    fprintf(stderr, "The PPPoE relay does not work on Linux 2.0 kernels.\n");
-    exit(EXIT_FAILURE);
-#endif
-#endif
-
-    if (!IfName) {
-	IfName = DEFAULT_IF;
-    }
-    
-    if (!ACName) {
-	ACName = malloc(HOSTNAMELEN);
-	if (gethostname(ACName, HOSTNAMELEN) < 0) {
-	    fatalSys("gethostname");
-	}
-    }
-
-    /* If address pool filename given, count number of addresses */
-    if (addressPoolFname) {
-	NumSessionSlots = parseAddressPool(addressPoolFname, 0);
-    }
-
-    /* Max 65534 - SessOffset sessions */
-    if (NumSessionSlots + SessOffset > 65534) {
-	fprintf(stderr, "-N and -o options must add up to at most 65534\n");
-	exit(EXIT_FAILURE);
-    }
-
-    /* Allocate memory for sessions */
-    Sessions = calloc(NumSessionSlots, sizeof(struct ClientSession));
-    if (!Sessions) {
-	rp_fatal("Cannot allocate memory for session slots");
-    }
-
-    /* Fill in remote IP addresses from pool */
-    if (addressPoolFname) {
-	(void) parseAddressPool(addressPoolFname, 1);
-    }
-
-    /* For testing -- generate sequential remote IP addresses */
-    for(i=0; i<NumSessionSlots; i++) {
-	Sessions[i].pid = 0;
-	Sessions[i].sess = htons(i+1+SessOffset);
-
-	if (!addressPoolFname) {
-	    memcpy(Sessions[i].ip, RemoteIP, sizeof(RemoteIP));
-	    
-	    /* Increment IP */
-	    RemoteIP[3]++;
-	    if (!RemoteIP[3]) {
-		RemoteIP[3] = 0;
-		RemoteIP[2]++;
-		if (!RemoteIP[2]) {
-		    RemoteIP[1]++;
-		    if (!RemoteIP[1]) {
-			RemoteIP[0]++;
-		    }
-		}
-	    }
-	}
-    }
-
-    /* Daemonize -- UNIX Network Programming, Vol. 1, Stevens */
-    if (beDaemon) {
-	i = fork();
-	if (i < 0) {
-	    fatalSys("fork");
-	} else if (i != 0) {
-	    /* parent */
-	    exit(EXIT_SUCCESS);
-	}
-	setsid();
-	signal(SIGHUP, SIG_IGN);
-	i = fork();
-	if (i < 0) {
-	    fatalSys("fork");
-	} else if (i != 0) {
-	    exit(EXIT_SUCCESS);
-	}
-
-	chdir("/");
-	closelog();
-	for (i=0; i<CLOSEFD; i++) close(i);
-	/* We nuked our syslog descriptor... */
-	openlog("pppoe-server", LOG_PID, LOG_DAEMON);
-    }
-
-    /* Initialize our random cookie.  Try /dev/urandom; if that fails,
-       use PID and rand() */
-    fp = fopen("/dev/urandom", "r");
-    if (fp) {
-	fread(&CookieSeed, 1, SEED_LEN, fp);
-	fclose(fp);
-    } else {
-	CookieSeed[0] = getpid() & 0xFF;
-	CookieSeed[1] = (getpid() >> 8) & 0xFF;
-	for (i=2; i<SEED_LEN; i++) {
-	    CookieSeed[i] = (rand() >> (i % 9)) & 0xFF;
-	}
-    }
-    
-    sock = openInterface(IfName, Eth_PPPOE_Discovery, myAddr);
-
-    /* Set signal handler for SIGCHLD */
-    act.sa_handler = childHandler;
-    sigemptyset(&act.sa_mask);
-    act.sa_flags = SA_NOCLDSTOP | SA_RESTART;
-    if (sigaction(SIGCHLD, &act, NULL) < 0) {
-	fatalSys("sigaction");
-    }
-
-    /* Set up pipe for signal handler */
-    if (pipe(Pipe) < 0) {
-	fatalSys("pipe");
-    }
-
-    /* Main server loop */
-    maxFD = sock;
-    if (Pipe[0] > maxFD) maxFD = Pipe[0];
-    maxFD++;
-
-    for(;;) {
-	fd_set readable;
-	FD_ZERO(&readable);
-	FD_SET(sock, &readable);
-	FD_SET(Pipe[0], &readable);
-
-	while(1) {
-	    i = select(maxFD, &readable, NULL, NULL, NULL);
-	    if (i >= 0 || errno != EINTR) break;
-	}
-	if (i < 0) {
-	    fatalSys("select");
-	}
-
-	if (FD_ISSET(Pipe[0], &readable)) {
-	    /* Clear pipe */
-	    char buf[SMALLBUF];
-	    read(Pipe[0], buf, SMALLBUF);
-	}
-
-	if (ReapPending) {
-	    ReapPending = 0;
-	    reapSessions(myAddr, sock);
-	}
-	if (!FD_ISSET(sock, &readable)) {
-	    continue;
-	}
-
-	if (receivePacket(sock, &packet, &len) < 0) {
-	    continue;
-	}
-	
-	/* Check length */
-	if (ntohs(packet.length) + HDR_SIZE > len) {
-	    syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-		   (unsigned int) ntohs(packet.length));
-	    continue;
-	}
-
-	/* Sanity check on packet */
-	if (packet.ver != 1 || packet.type != 1) {
-	    /* Syslog an error */
-	    continue;
-	}
-	switch(packet.code) {
-	case CODE_PADI:
-	    processPADI(sock, myAddr, &packet, len);
-	    break;
-	case CODE_PADR:
-	    processPADR(sock, myAddr, &packet, len);
-	    break;
-	case CODE_PADT:
-	    /* Kill the child */
-	    processPADT(sock, myAddr, &packet, len);
-	    break;
-	case CODE_SESS:
-	    /* Ignore SESS -- children will handle them */
-	    break;
-	case CODE_PADO:
-	case CODE_PADS:
-  	    /* Ignore PADO and PADS totally */
-	    break;
-	default:
-	    /* Syslog an error */
-	    break;
-	}
-    }
-    return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: sendErrorPADS
-*%ARGUMENTS:
-* sock -- socket to write to
-* source -- source Ethernet address
-* dest -- destination Ethernet address
-* errorTag -- error tag
-* errorMsg -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends a PADS packet with an error message
-***********************************************************************/
-void
-sendErrorPADS(int sock,
-	      unsigned char *source,
-	      unsigned char *dest,
-	      int errorTag,
-	      char *errorMsg)
-{
-    PPPoEPacket pads;
-    unsigned char *cursor = pads.payload;
-    UINT16_t plen;
-    PPPoETag err;
-    int elen = strlen(errorMsg);
-
-    memcpy(pads.ethHdr.h_dest, dest, ETH_ALEN);
-    memcpy(pads.ethHdr.h_source, source, ETH_ALEN);
-    pads.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    pads.ver = 1;
-    pads.type = 1;
-    pads.code = CODE_PADS;
-    
-    pads.session = htons(0);
-    plen = 0;
-    
-    err.type = htons(errorTag);
-    err.length = htons(elen);
-    
-    memcpy(err.payload, errorMsg, elen);
-    memcpy(cursor, &err, TAG_HDR_SIZE+elen);
-    cursor += TAG_HDR_SIZE + elen;
-    plen += TAG_HDR_SIZE + elen;
-    
-    if (relayId.type) {
-	memcpy(cursor, &relayId, ntohs(relayId.length) + TAG_HDR_SIZE);
-	cursor += ntohs(relayId.length) + TAG_HDR_SIZE;
-	plen += ntohs(relayId.length) + TAG_HDR_SIZE;
-    }
-    if (hostUniq.type) {
-	memcpy(cursor, &hostUniq, ntohs(hostUniq.length) + TAG_HDR_SIZE);
-	cursor += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-	plen += ntohs(hostUniq.length) + TAG_HDR_SIZE;
-    }
-    pads.length = htons(plen);
-    sendPacket(NULL, sock, &pads, (int) (plen + HDR_SIZE));
-}
-	      
-
-/**********************************************************************
-*%FUNCTION: startPPPDUserMode
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD for user-mode PPPoE
-***********************************************************************/
-void
-startPPPDUserMode(struct ClientSession *session)
-{
-    /* Leave some room */
-    char *argv[20];
-
-    char buffer[SMALLBUF];
-
-    argv[0] = "pppd";
-    argv[1] = "pty";
-
-    snprintf(buffer, SMALLBUF, "%s -n -I %s -e %d:%02x:%02x:%02x:%02x:%02x:%02x%s",
-	     PPPOE_PATH, IfName,
-	     ntohs(session->sess),
-	     session->eth[0], session->eth[1], session->eth[2],
-	     session->eth[3], session->eth[4], session->eth[5],
-	     PppoeOptions);
-    argv[2] = strdup(buffer);
-    if (!argv[2]) {
-	/* TODO: Send a PADT */
-	exit(EXIT_FAILURE);
-    }
-
-    argv[3] = "file";
-    argv[4] = PPPOE_SERVER_OPTIONS;
-
-    snprintf(buffer, SMALLBUF, "%d.%d.%d.%d:%d.%d.%d.%d",
-	    (int) LocalIP[0], (int) LocalIP[1],
-	    (int) LocalIP[2], (int) LocalIP[3],
-	    (int) session->ip[0], (int) session->ip[1],
-	    (int) session->ip[2], (int) session->ip[3]);
-    syslog(LOG_INFO,
-	   "Session %d created for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
-	   ntohs(session->sess),
-	   session->eth[0], session->eth[1], session->eth[2],
-	   session->eth[3], session->eth[4], session->eth[5],
-	   (int) session->ip[0], (int) session->ip[1],
-	   (int) session->ip[2], (int) session->ip[3]);
-    argv[5] = buffer; /* No need for strdup -- about to execv! */
-    argv[6] = "nodetach";
-    argv[7] = "noaccomp";
-    argv[8] = "nobsdcomp";
-    argv[9] = "nodeflate";
-    argv[10] = "nopcomp";
-    argv[11] = "novj";
-    argv[12] = "novjccomp";
-    argv[13] = "default-asyncmap";
-    if (Synchronous) {
-	argv[14] = "sync";
-	argv[15] = NULL;
-    } else {
-	argv[14] = NULL;
-    }
-
-    execv(PPPD_PATH, argv);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: startPPPDLinuxKernelMode
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD for kernel-mode PPPoE on Linux
-***********************************************************************/
-void
-startPPPDLinuxKernelMode(struct ClientSession *session)
-{
-    /* Leave some room */
-    char *argv[20];
-
-    char buffer[SMALLBUF];
-
-    argv[0] = "pppd";
-    argv[1] = "plugin";
-    argv[2] = PLUGIN_PATH;
-    argv[3] = IfName;
-    snprintf(buffer, SMALLBUF, "%d:%02x:%02x:%02x:%02x:%02x:%02x",
-	     ntohs(session->sess),
-	     session->eth[0], session->eth[1], session->eth[2],
-	     session->eth[3], session->eth[4], session->eth[5]);
-    argv[4] = "rp_pppoe_sess";
-    argv[5] = strdup(buffer);
-    if (!argv[5]) {
-	/* TODO: Send a PADT */
-	exit(EXIT_FAILURE);
-    }
-    argv[6] = "file";
-    argv[7] = PPPOE_SERVER_OPTIONS;
-
-    snprintf(buffer, SMALLBUF, "%d.%d.%d.%d:%d.%d.%d.%d",
-	    (int) LocalIP[0], (int) LocalIP[1],
-	    (int) LocalIP[2], (int) LocalIP[3],
-	    (int) session->ip[0], (int) session->ip[1],
-	    (int) session->ip[2], (int) session->ip[3]);
-    syslog(LOG_INFO,
-	   "Session %d created for client %02x:%02x:%02x:%02x:%02x:%02x (%d.%d.%d.%d)",
-	   ntohs(session->sess),
-	   session->eth[0], session->eth[1], session->eth[2],
-	   session->eth[3], session->eth[4], session->eth[5],
-	   (int) session->ip[0], (int) session->ip[1],
-	   (int) session->ip[2], (int) session->ip[3]);
-    argv[8] = buffer;
-    argv[9] = "nodetach";
-    argv[10] = "noaccomp";
-    argv[11] = "nobsdcomp";
-    argv[12] = "nodeflate";
-    argv[13] = "nopcomp";
-    argv[14] = "novj";
-    argv[15] = "novjccomp";
-    argv[16] = "default-asyncmap";
-    argv[17] = NULL;
-    execv(PPPD_PATH, argv);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: startPPPD
-*%ARGUMENTS:
-* session -- client session record
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Starts PPPD
-***********************************************************************/
-void
-startPPPD(struct ClientSession *session)
-{
-    if (UseLinuxKernelModePPPoE) startPPPDLinuxKernelMode(session);
-    else startPPPDUserMode(session);
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe-sniff.c b/mdk-stage1/rp-pppoe/src/pppoe-sniff.c
deleted file mode 100644
index aa796547b..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe-sniff.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/***********************************************************************
-*
-* pppoe-sniff.c
-*
-* Sniff a network for likely-looking PPPoE frames and deduce the value
-* to supply to PPPOE_EXTRA in /etc/ppp/pppoe.conf.  USE AT YOUR OWN RISK.
-*
-* Copyright (C) 2000 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <errno.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdlib.h>
-
-#ifdef USE_DLPI
-#include <sys/dlpi.h>
-/* function declarations */
-void dlpromisconreq( int fd, u_long  level);
-void dlokack(int fd, char *bufp);
-#endif
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-
-/* Global vars */
-int SeenPADR = 0;
-int SeenSess = 0;
-UINT16_t SessType, DiscType;
-
-char *IfName = NULL;		/* Interface name */
-char *ServiceName = NULL;	/* Service name   */
-
-/**********************************************************************
-*%FUNCTION: parsePADRTags
-*%ARGUMENTS:
-* type -- tag type
-* len -- tag length
-* data -- tag data
-* extra -- extra user data.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Picks interesting tags out of a PADR packet
-***********************************************************************/
-void
-parsePADRTags(UINT16_t type, UINT16_t len, unsigned char *data,
-	      void *extra)
-{
-    switch(type) {
-    case TAG_SERVICE_NAME:
-	ServiceName = malloc(len+1);
-	if (ServiceName) {
-	    memcpy(ServiceName, data, len);
-	    ServiceName[len] = 0;
-	}
-	break;
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-    exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    printErr(str);
-    exit(1);
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
-    fprintf(stderr, "Usage: %s [options]\n", argv0);
-    fprintf(stderr, "Options:\n");
-    fprintf(stderr, "   -I if_name     -- Specify interface (default %s.)\n",
-	    DEFAULT_IF);
-    fprintf(stderr, "   -V             -- Print version and exit.\n");
-    fprintf(stderr, "\nPPPoE Version %s, Copyright (C) 2000 Roaring Penguin Software Inc.\n", VERSION);
-    fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
-    fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
-    fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
-    fprintf(stderr, "http://www.roaringpenguin.com\n");
-    exit(0);
-}
-
-#if !defined(USE_LINUX_PACKET) && !defined(USE_DLPI)
-
-int
-main()
-{
-    fprintf(stderr, "Sorry, pppoe-sniff works only on Linux.\n");
-    return 1;
-}
-
-#else
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- count and values of command-line arguments
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Main program
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
-    int opt;
-    int sock;
-    PPPoEPacket pkt;
-    int size;
-#ifdef USE_DLPI
-    long buf[MAXDLBUF]; 
-#endif
-
-    while((opt = getopt(argc, argv, "I:V")) != -1) {
-	switch(opt) {
-	case 'I':
-	    SET_STRING(IfName, optarg);
-	    break;
-	case 'V':
-	    printf("pppoe-sniff: Roaring Penguin PPPoE Version %s\n", VERSION);
-	    exit(0);
-	default:
-	    usage(argv[0]);
-	}
-    }
-
-    /* Pick a default interface name */
-    if (!IfName) {
-	IfName = DEFAULT_IF;
-    }
-
-    /* Open the interface */
-#ifdef USE_DLPI
-	sock = openInterface(IfName, Eth_PPPOE_Discovery, NULL); 
-        dlpromisconreq(sock, DL_PROMISC_PHYS);
-        dlokack(sock, (char *)buf);
-	dlpromisconreq(sock, DL_PROMISC_SAP);
-	dlokack(sock, (char *)buf);
-#else
-
-    sock = openInterface(IfName, ETH_P_ALL,  NULL);
-
-#endif 
-
-    /* We assume interface is in promiscuous mode -- use ifconfig to
-       ensure this */
-    fprintf(stderr, "Sniffing for PADR.  Start your connection on another machine...\n");
-    while (!SeenPADR) {
-	if (receivePacket(sock, &pkt, &size) < 0) continue;
-	if (ntohs(pkt.length) + HDR_SIZE > size) continue;
-	if (pkt.ver != 1 || pkt.type != 1)       continue;
-	if (pkt.code != CODE_PADR)               continue;
-
-	/* Looks promising... parse it */
-	if (parsePacket(&pkt, parsePADRTags, NULL) < 0) {
-	    continue;
-	}
-	DiscType = ntohs(pkt.ethHdr.h_proto);
-	fprintf(stderr, "\nExcellent!  Sniffed a likely-looking PADR.\n");
-	break;
-    }
-    
-    while (!SeenSess) {
-	if (receivePacket(sock, &pkt, &size) < 0) continue;
-	if (ntohs(pkt.length) + HDR_SIZE > size) continue;
-	if (pkt.ver != 1 || pkt.type != 1)       continue;
-	if (pkt.code != CODE_SESS)               continue;
-
-	/* Cool! */
-	SessType = ntohs(pkt.ethHdr.h_proto);
-	break;
-    }
-
-    fprintf(stderr, "Wonderful!  Sniffed a likely-looking session packet.\n");
-    if ((ServiceName == NULL || *ServiceName == 0) &&
-	DiscType == ETH_PPPOE_DISCOVERY &&
-	SessType == ETH_PPPOE_SESSION) {
-	fprintf(stderr, "\nGreat!  It looks like a standard PPPoE service.\nYou should not need anything special in the configuration file.\n");
-	return 0;
-    }
-
-    fprintf(stderr, "\nOK, looks like you need something special in the configuration file.\nTry this:\n\n");
-    if (ServiceName != NULL && *ServiceName != 0) {
-	fprintf(stderr, "SERVICENAME='%s'\n", ServiceName);
-    }
-    if (DiscType != ETH_PPPOE_DISCOVERY || SessType != ETH_PPPOE_SESSION) {
-	fprintf(stderr, " PPPOE_EXTRA='-f %x:%x'\n", DiscType, SessType);
-    }
-    return 0;
-}
-
-#endif
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-}
diff --git a/mdk-stage1/rp-pppoe/src/pppoe.c b/mdk-stage1/rp-pppoe/src/pppoe.c
deleted file mode 100644
index 8ffe37248..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe.c
+++ /dev/null
@@ -1,834 +0,0 @@
-/***********************************************************************
-*
-* pppoe.c 
-*
-* Implementation of user-space PPPoE redirector for Linux.
-*
-* Copyright (C) 2000-2001 by Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-***********************************************************************/
-
-static char const RCSID[] =
-"$Id$";
-
-#include "pppoe.h"
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <string.h>
-#include <stdlib.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef USE_LINUX_PACKET
-#include <sys/ioctl.h>
-#include <fcntl.h>
-#endif
-
-#include <signal.h>
-
-#ifdef HAVE_N_HDLC
-#ifndef N_HDLC
-#include <linux/termios.h>
-#endif
-#endif
-
-/* Default interface if no -I option given */
-#define DEFAULT_IF "eth0"
-
-/* Global variables -- options */
-int optInactivityTimeout = 0;	/* Inactivity timeout */
-int optClampMSS          = 0;	/* Clamp MSS to this value */
-int optSkipSession       = 0;	/* Perform discovery, print session info
-				   and exit */
-
-PPPoEConnection *Connection = NULL; /* Must be global -- used
-				       in signal handler */
-/***********************************************************************
-*%FUNCTION: sendSessionPacket
-*%ARGUMENTS:
-* conn -- PPPoE connection
-* packet -- the packet to send
-* len -- length of data to send
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Transmits a session packet to the peer.
-***********************************************************************/
-void
-sendSessionPacket(PPPoEConnection *conn, PPPoEPacket *packet, int len)
-{
-    packet->length = htons(len);
-    if (optClampMSS) {
-	clampMSS(packet, "outgoing", optClampMSS);
-    }
-    if (sendPacket(conn, conn->sessionSocket, packet, len + HDR_SIZE) < 0) {
-	exit(EXIT_FAILURE);
-    }
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, packet, "SENT");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-}
-
-#ifdef USE_BPF
-/**********************************************************************
-*%FUNCTION: sessionDiscoveryPacket
-*%ARGUMENTS:
-* packet -- the discovery packet that was received
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* We got a discovery packet during the session stage.  This most likely
-* means a PADT.
-*
-* The BSD version uses a single socket for both discovery and session
-* packets.  When a packet comes in over the wire once we are in
-* session mode, either syncReadFromEth() or asyncReadFromEth() will
-* have already read the packet and determined it to be a discovery
-* packet before passing it here.
-***********************************************************************/
-void
-sessionDiscoveryPacket(PPPoEPacket *packet)
-{
-    /* Sanity check */
-    if (packet->code != CODE_PADT) {
-	return;
-    }
-
-    /* It's a PADT, all right.  Is it for us? */
-    if (packet->session != Connection->session) {
-	/* Nope, ignore it */
-	return;
-    }
-
-    syslog(LOG_INFO,
-	   "Session terminated -- received PADT from access concentrator");
-    parsePacket(packet, parseLogErrs, NULL);
-    exit(EXIT_SUCCESS);
-}
-#else
-/**********************************************************************
-*%FUNCTION: sessionDiscoveryPacket
-*%ARGUMENTS:
-* conn -- PPPoE connection
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* We got a discovery packet during the session stage.  This most likely
-* means a PADT.
-***********************************************************************/
-void
-sessionDiscoveryPacket(PPPoEConnection *conn)
-{
-    PPPoEPacket packet;
-    int len;
-
-    if (receivePacket(conn->discoverySocket, &packet, &len) < 0) {
-	return;
-    }
-
-    /* Check length */
-    if (ntohs(packet.length) + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "RCVD");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-
-    if (packet.code != CODE_PADT) {
-	/* Not PADT; ignore it */
-	return;
-    }
-
-    /* It's a PADT, all right.  Is it for us? */
-    if (packet.session != conn->session) {
-	/* Nope, ignore it */
-	return;
-    }
-
-    syslog(LOG_INFO,
-	   "Session terminated -- received PADT from peer");
-    parsePacket(&packet, parseLogErrs, NULL);
-    exit(EXIT_SUCCESS);
-}
-#endif /* USE_BPF */
-
-/**********************************************************************
-*%FUNCTION: session
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Handles the "session" phase of PPPoE
-***********************************************************************/
-void
-session(PPPoEConnection *conn)
-{
-    fd_set readable;
-    PPPoEPacket packet;
-    struct timeval tv;
-    struct timeval *tvp = NULL;
-    int maxFD = 0;
-    int r;
-
-    /* Open a session socket */
-    conn->sessionSocket = openInterface(conn->ifName, Eth_PPPOE_Session, conn->myEth);
-
-    /* Prepare for select() */
-    if (conn->sessionSocket > maxFD)   maxFD = conn->sessionSocket;
-    if (conn->discoverySocket > maxFD) maxFD = conn->discoverySocket;
-    maxFD++;
-
-    /* Fill in the constant fields of the packet to save time */
-    memcpy(packet.ethHdr.h_dest, conn->peerEth, ETH_ALEN);
-    memcpy(packet.ethHdr.h_source, conn->myEth, ETH_ALEN);
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Session);
-    packet.ver = 1;
-    packet.type = 1;
-    packet.code = CODE_SESS;
-    packet.session = conn->session;
-
-    initPPP();
-
-#ifdef USE_BPF
-    /* check for buffered session data */
-    while (BPF_BUFFER_HAS_DATA) {
-	if (conn->synchronous) {
-	    syncReadFromEth(conn, conn->sessionSocket, optClampMSS);
-	} else {
-	    asyncReadFromEth(conn, conn->sessionSocket, optClampMSS);
-	}
-    }
-#endif
-
-    for (;;) {
-	if (optInactivityTimeout > 0) {
-	    tv.tv_sec = optInactivityTimeout;
-	    tv.tv_usec = 0;
-	    tvp = &tv;
-	}
-	FD_ZERO(&readable);
-	FD_SET(0, &readable);     /* ppp packets come from stdin */
-	if (conn->discoverySocket >= 0) {
-	    FD_SET(conn->discoverySocket, &readable);
-	}
-	FD_SET(conn->sessionSocket, &readable);
-	while(1) {
-	    r = select(maxFD, &readable, NULL, NULL, tvp);
-	    if (r >= 0 || errno != EINTR) break;
-	}
-	if (r < 0) {
-	    fatalSys("select (session)");
-	}
-	if (r == 0) { /* Inactivity timeout */
-	    syslog(LOG_ERR, "Inactivity timeout... something wicked happened");
-	    sendPADT(conn, "RP-PPPoE: Inactivity timeout");
-	    exit(EXIT_FAILURE);
-	}
-
-	/* Handle ready sockets */
-	if (FD_ISSET(0, &readable)) {
-	    if (conn->synchronous) {
-		syncReadFromPPP(conn, &packet);
-	    } else {
-		asyncReadFromPPP(conn, &packet);
-	    }
-	}
-
-	if (FD_ISSET(conn->sessionSocket, &readable)) {
-	    do {
-		if (conn->synchronous) {
-		    syncReadFromEth(conn, conn->sessionSocket, optClampMSS);
-		} else {
-		    asyncReadFromEth(conn, conn->sessionSocket, optClampMSS);
-		}
-	    } while (BPF_BUFFER_HAS_DATA);
-	}
-
-#ifndef USE_BPF	
-	/* BSD uses a single socket, see *syncReadFromEth() */
-	/* for calls to sessionDiscoveryPacket() */
-	if (conn->discoverySocket >= 0) {
-	    if (FD_ISSET(conn->discoverySocket, &readable)) {
-		sessionDiscoveryPacket(conn);
-	    }
-	}
-#endif
-
-    }
-}
-
-
-/***********************************************************************
-*%FUNCTION: sigPADT
-*%ARGUMENTS:
-* src -- signal received
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* If an established session exists send PADT to terminate from session
-*  from our end
-***********************************************************************/
-void
-sigPADT(int src)
-{
-  syslog(LOG_DEBUG,"Received signal %d.",(int)src);
-  sendPADT(Connection, "RP-PPPoE: Received signal");
-  exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
-    fprintf(stderr, "Usage: %s [options]\n", argv0);
-    fprintf(stderr, "Options:\n");
-#ifdef USE_BPF
-    fprintf(stderr, "   -I if_name     -- Specify interface (REQUIRED)\n");
-#else
-    fprintf(stderr, "   -I if_name     -- Specify interface (default %s.)\n",
-	    DEFAULT_IF);
-#endif
-    fprintf(stderr, "   -T timeout     -- Specify inactivity timeout in seconds.\n");
-    fprintf(stderr, "   -D filename    -- Log debugging information in filename.\n");
-    fprintf(stderr, "   -V             -- Print version and exit.\n");
-    fprintf(stderr, "   -A             -- Print access concentrator names and exit.\n");
-    fprintf(stderr, "   -S name        -- Set desired service name.\n");
-    fprintf(stderr, "   -C name        -- Set desired access concentrator name.\n");
-    fprintf(stderr, "   -U             -- Use Host-Unique to allow multiple PPPoE sessions.\n");
-    fprintf(stderr, "   -s             -- Use synchronous PPP encapsulation.\n");
-    fprintf(stderr, "   -m MSS         -- Clamp incoming and outgoing MSS options.\n");
-    fprintf(stderr, "   -p pidfile     -- Write process-ID to pidfile.\n");
-    fprintf(stderr, "   -e sess:mac    -- Skip discovery phase; use existing session.\n");
-    fprintf(stderr, "   -n             -- Do not open discovery socket.\n");
-    fprintf(stderr, "   -k             -- Kill a session with PADT (requires -e)\n");
-    fprintf(stderr, "   -d             -- Perform discovery, print session info and exit.\n");
-    fprintf(stderr, "   -f disc:sess   -- Set Ethernet frame types (hex).\n");
-    fprintf(stderr, "   -h             -- Print usage information.\n\n");
-    fprintf(stderr, "PPPoE Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
-    fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
-    fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
-    fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
-    fprintf(stderr, "http://www.roaringpenguin.com\n");
-    exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- count and values of command-line arguments
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Main program
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
-    int opt;
-    int n;
-    unsigned int m[6];		/* MAC address in -e option */
-    unsigned int s;		/* Temporary to hold session */
-    FILE *pidfile;
-    unsigned int discoveryType, sessionType;
-
-    PPPoEConnection conn;
-
-#ifdef HAVE_N_HDLC
-    int disc = N_HDLC;
-    long flags;
-#endif
-
-    /* Initialize connection info */
-    memset(&conn, 0, sizeof(conn));
-    conn.discoverySocket = -1;
-    conn.sessionSocket = -1;
-
-    /* For signal handler */
-    Connection = &conn;
-
-    /* Initialize syslog */
-    openlog("pppoe", LOG_PID, LOG_DAEMON);
-
-    while((opt = getopt(argc, argv, "I:VAT:D:hS:C:Usm:np:e:kdf:")) != -1) {
-	switch(opt) {
-	case 'f':
-	    if (sscanf(optarg, "%x:%x", &discoveryType, &sessionType) != 2) {
-		fprintf(stderr, "Illegal argument to -f: Should be disc:sess in hex\n");
-		exit(EXIT_FAILURE);
-	    }
-	    Eth_PPPOE_Discovery = (UINT16_t) discoveryType;
-	    Eth_PPPOE_Session   = (UINT16_t) sessionType;
-	    break;
-	case 'd':
-	    optSkipSession = 1;
-	    break;
-
-	case 'k':
-	    conn.killSession = 1;
-	    break;
-
-	case 'n':
-	    /* Do not even open a discovery socket -- used when invoked 
-	       by pppoe-server */
-	    conn.noDiscoverySocket = 1;
-	    break;
-
-	case 'e':
-	    /* Existing session: "sess:xx:yy:zz:aa:bb:cc" where "sess" is
-	       session-ID, and xx:yy:zz:aa:bb:cc is MAC-address of peer */
-	    n = sscanf(optarg, "%u:%2x:%2x:%2x:%2x:%2x:%2x",
-		       &s, &m[0], &m[1], &m[2], &m[3], &m[4], &m[5]);
-	    if (n != 7) {
-		fprintf(stderr, "Illegal argument to -e: Should be sess:xx:yy:zz:aa:bb:cc\n");
-		exit(EXIT_FAILURE);
-	    }
-
-	    /* Copy MAC address of peer */
-	    for (n=0; n<6; n++) {
-		conn.peerEth[n] = (unsigned char) m[n];
-	    }
-
-	    /* Convert session */
-	    conn.session = htons(s);
-
-	    /* Skip discovery phase! */
-	    conn.skipDiscovery = 1;
-	    break;
-		       
-	case 'p':
-	    pidfile = fopen(optarg, "w");
-	    if (pidfile) {
-		fprintf(pidfile, "%lu\n", (unsigned long) getpid());
-		fclose(pidfile);
-	    }
-	    break;
-	case 'S':
-	    SET_STRING(conn.serviceName, optarg);
-	    break;
-	case 'C':
-	    SET_STRING(conn.acName, optarg);
-	    break;
-	case 's':
-	    conn.synchronous = 1;
-	    break;
-	case 'U':
-	    conn.useHostUniq = 1;
-	    break;
-	case 'D':
-	    conn.debugFile = fopen(optarg, "w");
-	    if (!conn.debugFile) {
-		fprintf(stderr, "Could not open %s: %s\n",
-			optarg, strerror(errno));
-		exit(EXIT_FAILURE);
-	    }
-	    fprintf(conn.debugFile, "rp-pppoe-%s\n", VERSION);
-	    fflush(conn.debugFile);
-	    break;
-	case 'T':
-	    optInactivityTimeout = (int) strtol(optarg, NULL, 10);
-	    if (optInactivityTimeout < 0) {
-		optInactivityTimeout = 0;
-	    }
-	    break;
-	case 'm':
-	    optClampMSS = (int) strtol(optarg, NULL, 10);
-	    if (optClampMSS < 536) {
-		fprintf(stderr, "-m: %d is too low (min 536)\n", optClampMSS);
-		exit(EXIT_FAILURE);
-	    }
-	    if (optClampMSS > 1452) {
-		fprintf(stderr, "-m: %d is too high (max 1452)\n", optClampMSS);
-		exit(EXIT_FAILURE);
-	    }
-	    break;
-	case 'I':
-	    SET_STRING(conn.ifName, optarg);
-	    break;
-	case 'V':
-	    printf("Roaring Penguin PPPoE Version %s\n", VERSION);
-	    exit(EXIT_SUCCESS);
-	case 'A':
-	    conn.printACNames = 1;
-	    break;
-	case 'h':
-	    usage(argv[0]);
-	    break;
-	default:
-	    usage(argv[0]);
-	}
-    }
-
-    /* Pick a default interface name */
-    if (!conn.ifName) {
-#ifdef USE_BPF
-	fprintf(stderr, "No interface specified (-I option)\n");
-	exit(EXIT_FAILURE);
-#else
-	SET_STRING(conn.ifName, DEFAULT_IF);
-#endif
-    }
-
-    /* Set signal handlers: send PADT on TERM, HUP and INT */
-    if (!conn.printACNames) {
-	signal(SIGTERM, sigPADT);
-	signal(SIGHUP, sigPADT);
-	signal(SIGINT, sigPADT);
-
-#ifdef HAVE_N_HDLC
-	if (conn.synchronous) {
-	    if (ioctl(0, TIOCSETD, &disc) < 0) {
-		printErr("Unable to set line discipline to N_HDLC -- synchronous mode probably will fail");
-	    } else {
-		syslog(LOG_INFO,
-		       "Changed pty line discipline to N_HDLC for synchronous mode");
-	    }
-	    /* There is a bug in Linux's select which returns a descriptor
-	     * as readable if N_HDLC line discipline is on, even if
-	     * it isn't really readable.  This return happens only when
-	     * select() times out.  To avoid blocking forever in read(),
-	     * make descriptor 0 non-blocking */
-	    flags = fcntl(0, F_GETFL);
-	    if (flags < 0) fatalSys("fcntl(F_GETFL)");
-	    if (fcntl(0, F_SETFL, (long) flags | O_NONBLOCK) < 0) {
-		fatalSys("fcntl(F_SETFL)");
-	    }
-	}
-#endif
-
-    }
-
-    discovery(&conn);
-    if (optSkipSession) {
-	printf("%u:%02x:%02x:%02x:%02x:%02x:%02x\n",
-	       ntohs(conn.session),
-	       conn.peerEth[0],
-	       conn.peerEth[1],
-	       conn.peerEth[2],
-	       conn.peerEth[3],
-	       conn.peerEth[4],
-	       conn.peerEth[5]);
-	exit(EXIT_SUCCESS);
-    }
-    session(&conn);
-    return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-    sendPADT(Connection, "RP-PPPoE: System call error");
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    char buf[1024];
-    printErr(str);
-    sprintf(buf, "RP-PPPoE: %.256s", str);
-    sendPADT(Connection, buf);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: asyncReadFromEth
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* sock -- Ethernet socket
-* clampMss -- if non-zero, do MSS-clamping
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads a packet from the Ethernet interface and sends it to async PPP
-* device.
-***********************************************************************/
-void
-asyncReadFromEth(PPPoEConnection *conn, int sock, int clampMss)
-{
-    PPPoEPacket packet;
-    int len;
-    int plen;
-    int i;
-    unsigned char pppBuf[4096];
-    unsigned char *ptr = pppBuf;
-    unsigned char c;
-    UINT16_t fcs;
-    unsigned char header[2] = {FRAME_ADDR, FRAME_CTRL};
-    unsigned char tail[2];
-#ifdef USE_BPF
-    int type;
-#endif
-
-    if (receivePacket(sock, &packet, &len) < 0) {
-	return;
-    }
-
-    /* Check length */
-    if (ntohs(packet.length) + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "RCVD");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-
-#ifdef USE_BPF
-    /* Make sure this is a session packet before processing further */
-    type = etherType(&packet);
-    if (type == Eth_PPPOE_Discovery) {
-	sessionDiscoveryPacket(&packet);
-    } else if (type != Eth_PPPOE_Session) {
-	return;
-    }
-#endif
-
-    /* Sanity check */
-    if (packet.code != CODE_SESS) {
-	syslog(LOG_ERR, "Unexpected packet code %d", (int) packet.code);
-	return;
-    }
-    if (packet.ver != 1) {
-	syslog(LOG_ERR, "Unexpected packet version %d", (int) packet.ver);
-	return;
-    }
-    if (packet.type != 1) {
-	syslog(LOG_ERR, "Unexpected packet type %d", (int) packet.type);
-	return;
-    }
-    if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) {
-	/* Not for us -- must be another session.  This is not an error,
-	   so don't log anything.  */
-	return;
-    }
-
-    if (packet.session != conn->session) {
-	/* Not for us -- must be another session.  This is not an error,
-	   so don't log anything.  */
-	return;
-    }
-    plen = ntohs(packet.length);
-    if (plen + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus length field in session packet %d (%d)",
-	       (int) plen, (int) len);
-	return;
-    }
-
-    /* Clamp MSS */
-    if (clampMss) {
-	clampMSS(&packet, "incoming", clampMss);
-    }
-
-    /* Compute FCS */
-    fcs = pppFCS16(PPPINITFCS16, header, 2);
-    fcs = pppFCS16(fcs, packet.payload, plen) ^ 0xffff;
-    tail[0] = fcs & 0x00ff;
-    tail[1] = (fcs >> 8) & 0x00ff;
-
-    /* Build a buffer to send to PPP */
-    *ptr++ = FRAME_FLAG;
-    *ptr++ = FRAME_ADDR;
-    *ptr++ = FRAME_ESC;
-    *ptr++ = FRAME_CTRL ^ FRAME_ENC;
-
-    for (i=0; i<plen; i++) {
-	c = packet.payload[i];
-	if (c == FRAME_FLAG || c == FRAME_ADDR || c == FRAME_ESC || c < 0x20) {
-	    *ptr++ = FRAME_ESC;
-	    *ptr++ = c ^ FRAME_ENC;
-	} else {
-	    *ptr++ = c;
-	}
-    }
-    for (i=0; i<2; i++) {
-	c = tail[i];
-	if (c == FRAME_FLAG || c == FRAME_ADDR || c == FRAME_ESC || c < 0x20) {
-	    *ptr++ = FRAME_ESC;
-	    *ptr++ = c ^ FRAME_ENC;
-	} else {
-	    *ptr++ = c;
-	}
-    }
-    *ptr++ = FRAME_FLAG;
-
-    /* Ship it out */
-    if (write(1, pppBuf, (ptr-pppBuf)) < 0) {
-	fatalSys("asyncReadFromEth: write");
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: syncReadFromEth
-*%ARGUMENTS:
-* conn -- PPPoE connection info
-* sock -- Ethernet socket
-* clampMss -- if true, clamp MSS.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Reads a packet from the Ethernet interface and sends it to sync PPP
-* device.
-***********************************************************************/
-void
-syncReadFromEth(PPPoEConnection *conn, int sock, int clampMss)
-{
-    PPPoEPacket packet;
-    int len;
-    int plen;
-    struct iovec vec[2];
-    unsigned char dummy[2];
-#ifdef USE_BPF
-    int type;
-#endif
-
-    if (receivePacket(sock, &packet, &len) < 0) {
-	return;
-    }
-
-    /* Check length */
-    if (ntohs(packet.length) + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-    if (conn->debugFile) {
-	dumpPacket(conn->debugFile, &packet, "RCVD");
-	fprintf(conn->debugFile, "\n");
-	fflush(conn->debugFile);
-    }
-
-#ifdef USE_BPF
-    /* Make sure this is a session packet before processing further */
-    type = etherType(&packet);
-    if (type == Eth_PPPOE_Discovery) {
-	sessionDiscoveryPacket(&packet);
-    } else if (type != Eth_PPPOE_Session) {
-	return;
-    }
-#endif
-
-    /* Sanity check */
-    if (packet.code != CODE_SESS) {
-	syslog(LOG_ERR, "Unexpected packet code %d", (int) packet.code);
-	return;
-    }
-    if (packet.ver != 1) {
-	syslog(LOG_ERR, "Unexpected packet version %d", (int) packet.ver);
-	return;
-    }
-    if (packet.type != 1) {
-	syslog(LOG_ERR, "Unexpected packet type %d", (int) packet.type);
-	return;
-    }
-    if (memcmp(packet.ethHdr.h_source, conn->peerEth, ETH_ALEN)) {
-	/* Not for us -- must be another session.  This is not an error,
-	   so don't log anything.  */
-	return;
-    }
-    if (packet.session != conn->session) {
-	/* Not for us -- must be another session.  This is not an error,
-	   so don't log anything.  */
-	return;
-    }
-    plen = ntohs(packet.length);
-    if (plen + HDR_SIZE > len) {
-	syslog(LOG_ERR, "Bogus length field in session packet %d (%d)",
-	       (int) plen, (int) len);
-	return;
-    }
-
-    /* Clamp MSS */
-    if (clampMss) {
-	clampMSS(&packet, "incoming", clampMss);
-    }
-
-    /* Ship it out */
-    vec[0].iov_base = (void *) dummy;
-    dummy[0] = FRAME_ADDR;
-    dummy[1] = FRAME_CTRL;
-    vec[0].iov_len = 2;
-    vec[1].iov_base = (void *) packet.payload;
-    vec[1].iov_len = plen;
-
-    if (writev(1, vec, 2) < 0) {
-	fatalSys("syncReadFromEth: write");
-    }
-}
-
diff --git a/mdk-stage1/rp-pppoe/src/pppoe.h b/mdk-stage1/rp-pppoe/src/pppoe.h
deleted file mode 100644
index da300c17d..000000000
--- a/mdk-stage1/rp-pppoe/src/pppoe.h
+++ /dev/null
@@ -1,331 +0,0 @@
-/***********************************************************************
-*
-* pppoe.h
-*
-* Declaration of various PPPoE constants
-*
-* Copyright (C) 2000 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-#ifdef __sun__
-#define __EXTENSIONS__
-#endif
-
-#include "config.h"
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define _POSIX_SOURCE 1 /* For sigaction defines */
-#endif
-
-#include <stdio.h>		/* For FILE */
-#include <sys/types.h>		/* For pid_t */
-
-/* How do we access raw Ethernet devices? */
-#undef USE_LINUX_PACKET
-#undef USE_BPF
-
-#if defined(HAVE_NETPACKET_PACKET_H) || defined(HAVE_LINUX_IF_PACKET_H)
-#define USE_LINUX_PACKET 1
-#elif defined(HAVE_NET_BPF_H)
-#define USE_BPF 1
-#elif defined(HAVE_SYS_DLPI_H)
-#define USE_DLPI
-#endif
-
-/* Sanity check */
-#if !defined(USE_BPF) && !defined(USE_LINUX_PACKET) && !defined(USE_DLPI)
-#error Unknown method for accessing raw Ethernet frames
-#endif
-
-#ifdef HAVE_SYS_CDEFS_H
-#include <sys/cdefs.h>
-#endif
-
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-
-/* Ugly header files on some Linux boxes... */
-#if defined(HAVE_LINUX_IF_H)
-#include <linux/if.h>
-#elif defined(HAVE_NET_IF_H)
-#include <net/if.h>
-#endif
-
-#ifdef HAVE_NET_IF_TYPES_H
-#include <net/if_types.h>
-#endif
-
-#ifdef HAVE_NET_IF_DL_H
-#include <net/if_dl.h>
-#endif
-
-/* I'm not sure why this is needed... I do not have OpenBSD */
-#if defined(__OpenBSD__)
-#include <net/ppp_defs.h>
-#include <net/if_ppp.h>
-#endif
-
-#ifdef USE_BPF
-extern int bpfSize;
-struct PPPoEPacketStruct;
-void sessionDiscoveryPacket(struct PPPoEPacketStruct *packet);
-#define BPF_BUFFER_IS_EMPTY (bpfSize <= 0)
-#define BPF_BUFFER_HAS_DATA (bpfSize > 0)
-#define ethhdr ether_header
-#define h_dest ether_dhost
-#define h_source ether_shost
-#define h_proto ether_type
-#define	ETH_DATA_LEN ETHERMTU
-#define	ETH_ALEN ETHER_ADDR_LEN
-#else
-#undef USE_BPF
-#define BPF_BUFFER_IS_EMPTY 1
-#define BPF_BUFFER_HAS_DATA 0
-#endif
-
-#ifdef USE_DLPI
-#include <sys/ethernet.h>
-#define ethhdr ether_header
-#define	ETH_DATA_LEN ETHERMTU
-#define	ETH_ALEN ETHERADDRL
-#define h_dest ether_dhost.ether_addr_octet
-#define h_source ether_shost.ether_addr_octet
-#define h_proto ether_type
-
-/* cloned from dltest.h */
-#define         MAXDLBUF        8192
-#define         MAXDLADDR       1024
-#define         MAXWAIT         15
-#define         OFFADDR(s, n)   (u_char*)((char*)(s) + (int)(n))
-#define         CASERET(s)      case s:  return ("s")
-
-#endif
-
-/* Define various integer types -- assumes a char is 8 bits */
-#if SIZEOF_UNSIGNED_SHORT == 2
-typedef unsigned short UINT16_t;
-#elif SIZEOF_UNSIGNED_INT == 2
-typedef unsigned int UINT16_t;
-#else
-#error Could not find a 16-bit integer type
-#endif
-
-#if SIZEOF_UNSIGNED_SHORT == 4
-typedef unsigned short UINT32_t;
-#elif SIZEOF_UNSIGNED_INT == 4
-typedef unsigned int UINT32_t;
-#elif SIZEOF_UNSIGNED_LONG == 4
-typedef unsigned long UINT32_t;
-#else
-#error Could not find a 16-bit integer type
-#endif
-
-#ifdef HAVE_LINUX_IF_ETHER_H
-#include <linux/if_ether.h>
-#endif
-
-#include <netinet/in.h>
-
-#ifdef HAVE_NETINET_IF_ETHER_H
-#include <sys/types.h>
-
-#ifdef HAVE_SYS_SOCKET_H
-#include <sys/socket.h>
-#endif
-#ifndef HAVE_SYS_DLPI_H
-#include <netinet/if_ether.h>
-#endif
-#endif
-
-
-
-/* Ethernet frame types according to RFC 2516 */
-#define ETH_PPPOE_DISCOVERY 0x8863
-#define ETH_PPPOE_SESSION   0x8864
-
-/* But some brain-dead peers disobey the RFC, so frame types are variables */
-extern UINT16_t Eth_PPPOE_Discovery;
-extern UINT16_t Eth_PPPOE_Session;
-
-/* PPPoE codes */
-#define CODE_PADI           0x09
-#define CODE_PADO           0x07
-#define CODE_PADR           0x19
-#define CODE_PADS           0x65
-#define CODE_PADT           0xA7
-#define CODE_SESS           0x00
-
-/* PPPoE Tags */
-#define TAG_END_OF_LIST        0x0000
-#define TAG_SERVICE_NAME       0x0101
-#define TAG_AC_NAME            0x0102
-#define TAG_HOST_UNIQ          0x0103
-#define TAG_AC_COOKIE          0x0104
-#define TAG_VENDOR_SPECIFIC    0x0105
-#define TAG_RELAY_SESSION_ID   0x0110
-#define TAG_SERVICE_NAME_ERROR 0x0201
-#define TAG_AC_SYSTEM_ERROR    0x0202
-#define TAG_GENERIC_ERROR      0x0203
-
-/* Discovery phase states */
-#define STATE_SENT_PADI     0
-#define STATE_RECEIVED_PADO 1
-#define STATE_SENT_PADR     2
-#define STATE_SESSION       3
-#define STATE_TERMINATED    4
-
-/* How many PADI/PADS attempts? */
-#define MAX_PADI_ATTEMPTS 3
-
-/* Initial timeout for PADO/PADS */
-#define PADI_TIMEOUT 5
-
-/* States for scanning PPP frames */
-#define STATE_WAITFOR_FRAME_ADDR 0
-#define STATE_DROP_PROTO         1
-#define STATE_BUILDING_PACKET    2
-
-/* Special PPP frame characters */
-#define FRAME_ESC    0x7D
-#define FRAME_FLAG   0x7E
-#define FRAME_ADDR   0xFF
-#define FRAME_CTRL   0x03
-#define FRAME_ENC    0x20
-
-#define IPV4ALEN     4
-#define SMALLBUF   256
-
-/* A PPPoE Packet, including Ethernet headers */
-typedef struct PPPoEPacketStruct {
-    struct ethhdr ethHdr;	/* Ethernet header */
-#ifdef PACK_BITFIELDS_REVERSED
-    unsigned int type:4;	/* PPPoE Type (must be 1) */
-    unsigned int ver:4;		/* PPPoE Version (must be 1) */
-#else
-    unsigned int ver:4;		/* PPPoE Version (must be 1) */
-    unsigned int type:4;	/* PPPoE Type (must be 1) */
-#endif
-    unsigned int code:8;	/* PPPoE code */
-    unsigned int session:16;	/* PPPoE session */
-    unsigned int length:16;	/* Payload length */
-    unsigned char payload[ETH_DATA_LEN]; /* A bit of room to spare */
-} PPPoEPacket;
-
-/* Header size of a PPPoE packet */
-#define PPPOE_OVERHEAD 6  /* type, code, session, length */
-#define HDR_SIZE (sizeof(struct ethhdr) + PPPOE_OVERHEAD)
-#define MAX_PPPOE_PAYLOAD (ETH_DATA_LEN - PPPOE_OVERHEAD)
-#define MAX_PPPOE_MTU (MAX_PPPOE_PAYLOAD - 2)
-
-/* PPPoE Tag */
-
-typedef struct PPPoETagStruct {
-    unsigned int type:16;	/* tag type */
-    unsigned int length:16;	/* Length of payload */
-    unsigned char payload[ETH_DATA_LEN]; /* A LOT of room to spare */
-} PPPoETag;
-/* Header size of a PPPoE tag */
-#define TAG_HDR_SIZE 4
-
-/* Chunk to read from stdin */
-#define READ_CHUNK 4096
-
-/* Function passed to parsePacket */
-typedef void ParseFunc(UINT16_t type,
-		       UINT16_t len,
-		       unsigned char *data,
-		       void *extra);
-
-/* Structures used by PPPoE server */
-struct ClientSession {
-    pid_t pid;			/* PID of child handling session */
-    unsigned char ip[IPV4ALEN];	/* IP address of peer */
-    UINT16_t sess;		/* Session number */
-    unsigned char eth[ETH_ALEN]; /* Peer's Ethernet address */
-    int recvdPADT;		/* Peer sent a PADT */
-};
-
-#define PPPINITFCS16    0xffff  /* Initial FCS value */
-
-/* Keep track of the state of a connection -- collect everything in
-   one spot */
-
-typedef struct PPPoEConnectionStruct {
-    int discoveryState;		/* Where we are in discovery */
-    int discoverySocket;	/* Raw socket for discovery frames */
-    int sessionSocket;		/* Raw socket for session frames */
-    unsigned char myEth[ETH_ALEN]; /* My MAC address */
-    unsigned char peerEth[ETH_ALEN]; /* Peer's MAC address */
-    UINT16_t session;		/* Session ID */
-    char *ifName;		/* Interface name */
-    char *serviceName;		/* Desired service name, if any */
-    char *acName;		/* Desired AC name, if any */
-    int synchronous;		/* Use synchronous PPP */
-    int useHostUniq;		/* Use Host-Uniq tag */
-    int printACNames;		/* Just print AC names */
-    int skipDiscovery;		/* Skip discovery */
-    int noDiscoverySocket;	/* Don't even open discovery socket */
-    int killSession;		/* Kill session and exit */
-    FILE *debugFile;		/* Debug file for dumping packets */
-    int numPADOs;		/* Number of PADO packets received */
-    PPPoETag cookie;		/* We have to send this if we get it */
-    PPPoETag relayId;		/* Ditto */
-} PPPoEConnection;
-
-/* Structure used to determine acceptable PADO or PADS packet */
-struct PacketCriteria {
-    PPPoEConnection *conn;
-    int acNameOK;
-    int serviceNameOK;
-};
-
-/* Function Prototypes */
-UINT16_t etherType(PPPoEPacket *packet);
-int openInterface(char const *ifname, UINT16_t type, unsigned char *hwaddr);
-int sendPacket(PPPoEConnection *conn, int sock, PPPoEPacket *pkt, int size);
-int receivePacket(int sock, PPPoEPacket *pkt, int *size);
-void fatalSys(char const *str);
-void rp_fatal(char const *str);
-void printErr(char const *str);
-void sysErr(char const *str);
-void dumpPacket(FILE *fp, PPPoEPacket *packet, char const *dir);
-void dumpHex(FILE *fp, unsigned char const *buf, int len);
-int parsePacket(PPPoEPacket *packet, ParseFunc *func, void *extra);
-void parseLogErrs(UINT16_t typ, UINT16_t len, unsigned char *data, void *xtra);
-void syncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet);
-void asyncReadFromPPP(PPPoEConnection *conn, PPPoEPacket *packet);
-void asyncReadFromEth(PPPoEConnection *conn, int sock, int clampMss);
-void syncReadFromEth(PPPoEConnection *conn, int sock, int clampMss);
-char *strDup(char const *str);
-void sendPADT(PPPoEConnection *conn, char const *msg);
-void sendSessionPacket(PPPoEConnection *conn,
-		       PPPoEPacket *packet, int len);
-void initPPP(void);
-void clampMSS(PPPoEPacket *packet, char const *dir, int clampMss);
-UINT16_t computeTCPChecksum(unsigned char *ipHdr, unsigned char *tcpHdr);
-UINT16_t pppFCS16(UINT16_t fcs, unsigned char *cp, int len);
-void discovery(PPPoEConnection *conn);
-unsigned char *findTag(PPPoEPacket *packet, UINT16_t tagType,
-		       PPPoETag *tag);
-
-#define SET_STRING(var, val) do { if (var) free(var); var = strDup(val); } while(0);
-
-#define CHECK_ROOM(cursor, start, len) \
-do {\
-    if (((cursor)-(start))+(len) > MAX_PPPOE_PAYLOAD) { \
-        syslog(LOG_ERR, "Would create too-long packet"); \
-        return; \
-    } \
-} while(0)
-
-/* True if Ethernet address is broadcast or multicast */
-#define NOT_UNICAST(e) ((e[0] & 0x01) != 0)
-#define BROADCAST(e) ((e[0] & e[1] & e[2] & e[3] & e[4] & e[5]) == 0xFF)
-#define NOT_BROADCAST(e) ((e[0] & e[1] & e[2] & e[3] & e[4] & e[5]) != 0xFF)
diff --git a/mdk-stage1/rp-pppoe/src/relay.c b/mdk-stage1/rp-pppoe/src/relay.c
deleted file mode 100644
index 9738cb8a8..000000000
--- a/mdk-stage1/rp-pppoe/src/relay.c
+++ /dev/null
@@ -1,1541 +0,0 @@
-/***********************************************************************
-*
-* relay.c
-*
-* Implementation of PPPoE relay
-*
-* Copyright (C) 2001 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-static char const RCSID[] =
-"$Id$";
-
-#define _GNU_SOURCE 1 /* For SA_RESTART */
-
-#include "relay.h"
-
-#include <signal.h>
-
-#ifdef HAVE_SYSLOG_H
-#include <syslog.h>
-#endif
-
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-
-#ifdef HAVE_SYS_TIME_H
-#include <sys/time.h>
-#endif
-
-#ifdef HAVE_SYS_UIO_H
-#include <sys/uio.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-
-/* Interfaces (max MAX_INTERFACES) */
-PPPoEInterface Interfaces[MAX_INTERFACES];
-int NumInterfaces;
-
-/* Relay info */
-int NumSessions;
-int MaxSessions;
-PPPoESession *AllSessions;
-PPPoESession *FreeSessions;
-PPPoESession *ActiveSessions;
-
-SessionHash *AllHashes;
-SessionHash *FreeHashes;
-SessionHash *Buckets[HASHTAB_SIZE];
-
-volatile unsigned int Epoch = 0;
-volatile unsigned int CleanCounter = 0;
-
-/* How often to clean up stale sessions? */
-#define MIN_CLEAN_PERIOD 30  /* Minimum period to run cleaner */
-#define TIMEOUT_DIVISOR 20   /* How often to run cleaner per timeout period */
-unsigned int CleanPeriod = MIN_CLEAN_PERIOD;
-
-/* How long a session can be idle before it is cleaned up? */
-unsigned int IdleTimeout = MIN_CLEAN_PERIOD * TIMEOUT_DIVISOR;
-
-/* Pipe for breaking select() to initiate periodic cleaning */
-int CleanPipe[2];
-
-/* Our relay: if_index followed by peer_mac */
-#define MY_RELAY_TAG_LEN (sizeof(int) + ETH_ALEN)
-
-/* Hack for daemonizing */
-#define CLOSEFD 64
-
-/**********************************************************************
-*%FUNCTION: keepDescriptor
-*%ARGUMENTS:
-* fd -- a file descriptor
-*%RETURNS:
-* 1 if descriptor should NOT be closed during daemonizing; 0 otherwise.
-***********************************************************************/
-static int
-keepDescriptor(int fd)
-{
-    int i;
-    if (fd == CleanPipe[0] || fd == CleanPipe[1]) return 1;
-    for (i=0; i<NumInterfaces; i++) {
-	if (fd == Interfaces[i].discoverySock ||
-	    fd == Interfaces[i].sessionSock) return 1;
-    }
-    return 0;
-}
-
-/**********************************************************************
-*%FUNCTION: addTag
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* tag -- tag to add
-*%RETURNS:
-* -1 if no room in packet; number of bytes added otherwise.
-*%DESCRIPTION:
-* Inserts a tag as the first tag in a PPPoE packet.
-***********************************************************************/
-int
-addTag(PPPoEPacket *packet, PPPoETag const *tag)
-{
-    return insertBytes(packet, packet->payload, tag,
-		       ntohs(tag->length) + TAG_HDR_SIZE);
-}
-
-/**********************************************************************
-*%FUNCTION: insertBytes
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* loc -- location at which to insert bytes of data
-* bytes -- the data to insert
-* len -- length of data to insert
-*%RETURNS:
-* -1 if no room in packet; len otherwise.
-*%DESCRIPTION:
-* Inserts "len" bytes of data at location "loc" in "packet", moving all
-* other data up to make room.
-***********************************************************************/
-int
-insertBytes(PPPoEPacket *packet,
-	    unsigned char *loc,
-	    void const *bytes,
-	    int len)
-{
-    int toMove;
-    int plen = ntohs(packet->length);
-    /* Sanity checks */
-    if (loc < packet->payload ||
-	loc > packet->payload + plen ||
-	len + plen > MAX_PPPOE_PAYLOAD) {
-	return -1;
-    }
-
-    toMove = (packet->payload + plen) - loc;
-    memmove(loc+len, loc, toMove);
-    memcpy(loc, bytes, len);
-    packet->length = htons(plen + len);
-    return len;
-}
-
-/**********************************************************************
-*%FUNCTION: removeBytes
-*%ARGUMENTS:
-* packet -- a PPPoE packet
-* loc -- location at which to remove bytes of data
-* len -- length of data to remove
-*%RETURNS:
-* -1 if there was a problem, len otherwise
-*%DESCRIPTION:
-* Removes "len" bytes of data from location "loc" in "packet", moving all
-* other data down to close the gap
-***********************************************************************/
-int
-removeBytes(PPPoEPacket *packet,
-	    unsigned char *loc,
-	    int len)
-{
-    int toMove;
-    int plen = ntohs(packet->length);
-    /* Sanity checks */
-    if (len < 0 || len > plen ||
-	loc < packet->payload ||
-	loc + len > packet->payload + plen) {
-	return -1;
-    }
-
-    toMove = ((packet->payload + plen) - loc) - len;
-    memmove(loc, loc+len, toMove);
-    packet->length = htons(plen - len);
-    return len;
-}
-
-/**********************************************************************
-*%FUNCTION: usage
-*%ARGUMENTS:
-* argv0 -- program name
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints usage information and exits.
-***********************************************************************/
-void
-usage(char const *argv0)
-{
-    fprintf(stderr, "Usage: %s [options]\n", argv0);
-    fprintf(stderr, "Options:\n");
-    fprintf(stderr, "   -S if_name     -- Specify interface for PPPoE Server\n");
-    fprintf(stderr, "   -C if_name     -- Specify interface for PPPoE Client\n");
-    fprintf(stderr, "   -B if_name     -- Specify interface for both clients and server\n");
-    fprintf(stderr, "   -n nsess       -- Maxmimum number of sessions to relay\n");
-    fprintf(stderr, "   -i timeout     -- Idle timeout in seconds (0 = no timeout)\n");
-    fprintf(stderr, "   -F             -- Do not fork into background\n");
-    fprintf(stderr, "   -h             -- Print this help message\n");
-
-    fprintf(stderr, "\nPPPoE Version %s, Copyright (C) 2001 Roaring Penguin Software Inc.\n", VERSION);
-    fprintf(stderr, "PPPoE comes with ABSOLUTELY NO WARRANTY.\n");
-    fprintf(stderr, "This is free software, and you are welcome to redistribute it under the terms\n");
-    fprintf(stderr, "of the GNU General Public License, version 2 or any later version.\n");
-    fprintf(stderr, "http://www.roaringpenguin.com\n");
-    exit(EXIT_SUCCESS);
-}
-
-/**********************************************************************
-*%FUNCTION: main
-*%ARGUMENTS:
-* argc, argv -- usual suspects
-*%RETURNS:
-* EXIT_SUCCESS or EXIT_FAILURE
-*%DESCRIPTION:
-* Main program.  Options:
-* -C ifname           -- Use interface for PPPoE clients
-* -S ifname           -- Use interface for PPPoE servers
-* -B ifname           -- Use interface for both clients and servers
-* -n sessions         -- Maximum of "n" sessions
-***********************************************************************/
-int
-main(int argc, char *argv[])
-{
-    int opt;
-    int nsess = DEFAULT_SESSIONS;
-    struct sigaction sa;
-    int beDaemon = 1;
-    openlog("pppoe-relay", LOG_PID, LOG_DAEMON);
-
-    while((opt = getopt(argc, argv, "hC:S:B:n:i:F")) != -1) {
-	switch(opt) {
-	case 'h':
-	    usage(argv[0]);
-	    break;
-	case 'F':
-	    beDaemon = 0;
-	    break;
-	case 'C':
-	    addInterface(optarg, 1, 0);
-	    break;
-	case 'S':
-	    addInterface(optarg, 0, 1);
-	    break;
-	case 'B':
-	    addInterface(optarg, 1, 1);
-	    break;
-	case 'i':
-	    if (sscanf(optarg, "%u", &IdleTimeout) != 1) {
-		fprintf(stderr, "Illegal argument to -i: should be -i timeout\n");
-		exit(EXIT_FAILURE);
-	    }
-	    CleanPeriod = IdleTimeout / TIMEOUT_DIVISOR;
-	    if (CleanPeriod < MIN_CLEAN_PERIOD) CleanPeriod = MIN_CLEAN_PERIOD;
-	    break;
-	case 'n':
-	    if (sscanf(optarg, "%d", &nsess) != 1) {
-		fprintf(stderr, "Illegal argument to -n: should be -n #sessions\n");
-		exit(EXIT_FAILURE);
-	    }
-	    if (nsess < 1 || nsess > 65534) {
-		fprintf(stderr, "Illegal argument to -n: must range from 1 to 65534\n");
-		exit(EXIT_FAILURE);
-	    }
-	    break;
-	default:
-	    usage(argv[0]);
-	}
-    }
-
-#ifdef USE_LINUX_PACKET
-#ifndef HAVE_STRUCT_SOCKADDR_LL
-    fprintf(stderr, "The PPPoE relay does not work on Linux 2.0 kernels.\n");
-    exit(EXIT_FAILURE);
-#endif
-#endif
-
-    /* Check that at least two interfaces were defined */
-    if (NumInterfaces < 2) {
-	fprintf(stderr, "%s: Must define at least two interfaces\n",
-		argv[0]);
-	exit(EXIT_FAILURE);
-    }
-
-    /* Make a pipe for the cleaner */
-    if (pipe(CleanPipe) < 0) {
-	fatalSys("pipe");
-    }
-
-    /* Set up alarm handler */
-    sa.sa_handler = alarmHandler;
-    sigemptyset(&sa.sa_mask);
-    sa.sa_flags = SA_RESTART;
-    if (sigaction(SIGALRM, &sa, NULL) < 0) {
-	fatalSys("sigaction");
-    }
-    
-    /* Allocate memory for sessions, etc. */
-    initRelay(nsess);
-
-    /* Daemonize -- UNIX Network Programming, Vol. 1, Stevens */
-    if (beDaemon) {
-	int i;
-	i = fork();
-	if (i < 0) {
-	    fatalSys("fork");
-	} else if (i != 0) {
-	    /* parent */
-	    exit(0);
-	}
-	setsid();
-	signal(SIGHUP, SIG_IGN);
-	i = fork();
-	if (i < 0) {
-	    fatalSys("fork");
-	} else if (i != 0) {
-	    exit(0);
-	}
-
-	chdir("/");
-	closelog();
-	for (i=0; i<CLOSEFD; i++) {
-	    if (!keepDescriptor(i)) {
-		close(i);
-	    }
-	}
-	/* We nuked our syslog descriptor... */
-	openlog("pppoe-relay", LOG_PID, LOG_DAEMON);
-    }
-
-    /* Kick off SIGALRM if there is an idle timeout */
-    if (IdleTimeout) alarm(1);
-
-    /* Enter the relay loop */
-    relayLoop();
-
-    /* Shouldn't ever get here... */
-    return EXIT_FAILURE;
-}
-
-/**********************************************************************
-*%FUNCTION: addInterface
-*%ARGUMENTS:
-* ifname -- interface name
-* clientOK -- true if this interface should relay PADI, PADR packets.
-* acOK -- true if this interface should relay PADO, PADS packets.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Opens an interface; sets up discovery and session sockets.
-***********************************************************************/
-void
-addInterface(char const *ifname,
-	     int clientOK,
-	     int acOK)
-{
-    PPPoEInterface *i;
-    if (NumInterfaces >= MAX_INTERFACES) {
-	fprintf(stderr, "Too many interfaces (%d max)\n",
-		MAX_INTERFACES);
-	exit(EXIT_FAILURE);
-    }
-    i = &Interfaces[NumInterfaces++];
-    strncpy(i->name, ifname, IFNAMSIZ);
-    i->name[IFNAMSIZ] = 0;
-
-    i->discoverySock = openInterface(ifname, Eth_PPPOE_Discovery, i->mac);
-    i->sessionSock   = openInterface(ifname, Eth_PPPOE_Session,   NULL);
-    i->clientOK = clientOK;
-    i->acOK = acOK;
-}
-
-/**********************************************************************
-*%FUNCTION: initRelay
-*%ARGUMENTS:
-* nsess -- maximum allowable number of sessions
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Initializes relay hash table and session tables.
-***********************************************************************/
-void
-initRelay(int nsess)
-{
-    int i;
-    NumSessions = 0;
-    MaxSessions = nsess;
-
-    AllSessions = calloc(MaxSessions, sizeof(PPPoESession));
-    if (!AllSessions) {
-	rp_fatal("Unable to allocate memory for PPPoE session table");
-    }
-    AllHashes = calloc(MaxSessions*2, sizeof(SessionHash));
-    if (!AllHashes) {
-	rp_fatal("Unable to allocate memory for PPPoE hash table");
-    }
-
-    /* Initialize sessions in a linked list */
-    AllSessions[0].prev = NULL;
-    if (MaxSessions > 1) {
-	AllSessions[0].next = &AllSessions[1];
-    } else {
-	AllSessions[0].next = NULL;
-    }
-    for (i=1; i<MaxSessions-1; i++) {
-	AllSessions[i].prev = &AllSessions[i-1];
-	AllSessions[i].next = &AllSessions[i+1];
-    }
-    if (MaxSessions > 1) {
-	AllSessions[MaxSessions-1].prev = &AllSessions[MaxSessions-2];
-	AllSessions[MaxSessions-1].next = NULL;
-    }
-
-    FreeSessions = AllSessions;
-    ActiveSessions = NULL;
-
-    /* Initialize session numbers which we hand out */
-    for (i=0; i<MaxSessions; i++) {
-	AllSessions[i].sesNum = htons((UINT16_t) i+1);
-    }
-
-    /* Initialize hashes in a linked list */
-    AllHashes[0].prev = NULL;
-    AllHashes[0].next = &AllHashes[1];
-    for (i=1; i<2*MaxSessions-1; i++) {
-	AllHashes[i].prev = &AllHashes[i-1];
-	AllHashes[i].next = &AllHashes[i+1];
-    }
-    AllHashes[2*MaxSessions-1].prev = &AllHashes[2*MaxSessions-2];
-    AllHashes[2*MaxSessions-1].next = NULL;
-
-    FreeHashes = AllHashes;
-}
-
-/**********************************************************************
-*%FUNCTION: createSession
-*%ARGUMENTS:
-* ac -- Ethernet interface on access-concentrator side
-* cli -- Ethernet interface on client side
-* acMac -- Access concentrator's MAC address
-* cliMac -- Client's MAC address
-* acSess -- Access concentrator's session ID.
-*%RETURNS:
-* PPPoESession structure; NULL if one could not be allocated
-*%DESCRIPTION:
-* Initializes relay hash table and session tables.
-***********************************************************************/
-PPPoESession *
-createSession(PPPoEInterface const *ac,
-	      PPPoEInterface const *cli,
-	      unsigned char const *acMac,
-	      unsigned char const *cliMac,
-	      UINT16_t acSes)
-{
-    PPPoESession *sess;
-    SessionHash *acHash, *cliHash;
-
-    if (NumSessions >= MaxSessions) {
-	printErr("Maximum number of sessions reached -- cannot create new session");
-	return NULL;
-    }
-
-    /* Grab a free session */
-    sess = FreeSessions;
-    FreeSessions = sess->next;
-    NumSessions++;
-
-    /* Link it to the active list */
-    sess->next = ActiveSessions;
-    if (sess->next) {
-	sess->next->prev = sess;
-    }
-    ActiveSessions = sess;
-    sess->prev = NULL;
-
-    sess->epoch = Epoch;
-
-    /* Get two hash entries */
-    acHash = FreeHashes;
-    cliHash = acHash->next;
-    FreeHashes = cliHash->next;
-
-    acHash->peer = cliHash;
-    cliHash->peer = acHash;
-
-    sess->acHash = acHash;
-    sess->clientHash = cliHash;
-
-    acHash->interface = ac;
-    cliHash->interface = cli;
-
-    memcpy(acHash->peerMac, acMac, ETH_ALEN);
-    acHash->sesNum = acSes;
-    acHash->ses = sess;
-
-    memcpy(cliHash->peerMac, cliMac, ETH_ALEN);
-    cliHash->sesNum = sess->sesNum;
-    cliHash->ses = sess;
-
-    addHash(acHash);
-    addHash(cliHash);
-
-    /* Log */
-    syslog(LOG_INFO,
-	   "Opened session: server=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d), client=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d)",
-	   acHash->peerMac[0], acHash->peerMac[1],
-	   acHash->peerMac[2], acHash->peerMac[3],
-	   acHash->peerMac[4], acHash->peerMac[5],
-	   acHash->interface->name,
-	   ntohs(acHash->sesNum),
-	   cliHash->peerMac[0], cliHash->peerMac[1],
-	   cliHash->peerMac[2], cliHash->peerMac[3],
-	   cliHash->peerMac[4], cliHash->peerMac[5],
-	   cliHash->interface->name,
-	   ntohs(cliHash->sesNum));
-	   
-    return sess;
-}
-	    
-/**********************************************************************
-*%FUNCTION: freeSession
-*%ARGUMENTS:
-* ses -- session to free
-* msg -- extra message to log on syslog.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Frees data used by a PPPoE session -- adds hashes and session back
-* to the free list
-***********************************************************************/
-void
-freeSession(PPPoESession *ses, char const *msg)
-{
-    syslog(LOG_INFO,
-	   "Closed session: server=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d), client=%02x:%02x:%02x:%02x:%02x:%02x(%s:%d): %s",
-	   ses->acHash->peerMac[0], ses->acHash->peerMac[1],
-	   ses->acHash->peerMac[2], ses->acHash->peerMac[3],
-	   ses->acHash->peerMac[4], ses->acHash->peerMac[5],
-	   ses->acHash->interface->name,
-	   ntohs(ses->acHash->sesNum),
-	   ses->clientHash->peerMac[0], ses->clientHash->peerMac[1],
-	   ses->clientHash->peerMac[2], ses->clientHash->peerMac[3],
-	   ses->clientHash->peerMac[4], ses->clientHash->peerMac[5],
-	   ses->clientHash->interface->name,
-	   ntohs(ses->clientHash->sesNum), msg);
-
-    /* Unlink from active sessions */
-    if (ses->prev) {
-	ses->prev->next = ses->next;
-    } else {
-	ActiveSessions = ses->next;
-    }
-    if (ses->next) {
-	ses->next->prev = ses->prev;
-    }
-       
-    /* Link onto free list -- this is a singly-linked list, so
-       we do not care about prev */
-    ses->next = FreeSessions;
-    FreeSessions = ses;
-
-    unhash(ses->acHash);
-    unhash(ses->clientHash);
-    NumSessions--;
-}
-
-/**********************************************************************
-*%FUNCTION: unhash
-*%ARGUMENTS:
-* sh -- session hash to free
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Frees a session hash -- takes it out of hash table and puts it on
-* free list.
-***********************************************************************/
-void
-unhash(SessionHash *sh)
-{
-    unsigned int b = hash(sh->peerMac, sh->sesNum) % HASHTAB_SIZE;
-    if (sh->prev) {
-	sh->prev->next = sh->next;
-    } else {
-	Buckets[b] = sh->next;
-    }
-
-    if (sh->next) {
-	sh->next->prev = sh->prev;
-    }
-
-    /* Add to free list (singly-linked) */
-    sh->next = FreeHashes;
-    FreeHashes = sh;
-}
-
-/**********************************************************************
-*%FUNCTION: addHash
-*%ARGUMENTS:
-* sh -- a session hash
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Adds a SessionHash to the hash table
-***********************************************************************/
-void
-addHash(SessionHash *sh)
-{
-    unsigned int b = hash(sh->peerMac, sh->sesNum) % HASHTAB_SIZE;
-    sh->next = Buckets[b];
-    sh->prev = NULL;
-    if (sh->next) {
-	sh->next->prev = sh;
-    }
-    Buckets[b] = sh;
-}
-
-/**********************************************************************
-*%FUNCTION: hash
-*%ARGUMENTS:
-* mac -- an Ethernet address
-* sesNum -- a session number
-*%RETURNS:
-* A hash value combining Ethernet address with session number.
-* Currently very simplistic; we may need to experiment with different
-* hash values.
-***********************************************************************/
-unsigned int
-hash(unsigned char const *mac, UINT16_t sesNum)
-{
-    unsigned int ans1 =
-	((unsigned int) mac[0]) |
-	(((unsigned int) mac[1]) << 8) |
-	(((unsigned int) mac[2]) << 16) |
-	(((unsigned int) mac[3]) << 24);
-    unsigned int ans2 = 
-	((unsigned int) sesNum) |
-	(((unsigned int) mac[4]) << 16) |
-	(((unsigned int) mac[5]) << 24);
-    return ans1 ^ ans2;
-}
-
-/**********************************************************************
-*%FUNCTION: findSession
-*%ARGUMENTS:
-* mac -- an Ethernet address
-* sesNum -- a session number
-*%RETURNS:
-* The session hash for peer address "mac", session number sesNum
-***********************************************************************/
-SessionHash *
-findSession(unsigned char const *mac, UINT16_t sesNum)
-{
-    unsigned int b = hash(mac, sesNum) % HASHTAB_SIZE;
-    SessionHash *sh = Buckets[b];
-    while(sh) {
-	if (!memcmp(mac, sh->peerMac, ETH_ALEN) && sesNum == sh->sesNum) {
-	    return sh;
-	}
-	sh = sh->next;
-    }
-    return NULL;
-}
-
-/**********************************************************************
-*%FUNCTION: fatalSys
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to stderr and syslog and exits.
-***********************************************************************/
-void
-fatalSys(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: sysErr
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message plus the errno value to syslog.
-***********************************************************************/
-void
-sysErr(char const *str)
-{
-    char buf[1024];
-    sprintf(buf, "%.256s: %.256s", str, strerror(errno));
-    printErr(buf);
-}
-
-/**********************************************************************
-*%FUNCTION: rp_fatal
-*%ARGUMENTS:
-* str -- error message
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Prints a message to stderr and syslog and exits.
-***********************************************************************/
-void
-rp_fatal(char const *str)
-{
-    printErr(str);
-    exit(EXIT_FAILURE);
-}
-
-/**********************************************************************
-*%FUNCTION: relayLoop
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Runs the relay loop.  This function never returns
-***********************************************************************/
-void
-relayLoop()
-{
-    fd_set readable, readableCopy;
-    int maxFD;
-    int i, r;
-    int sock;
-    
-    /* Build the select set */
-    FD_ZERO(&readable);
-    maxFD = 0;
-    for (i=0; i<NumInterfaces; i++) {
-	sock = Interfaces[i].discoverySock;
-	if (sock > maxFD) maxFD = sock;
-	FD_SET(sock, &readable);
-	sock = Interfaces[i].sessionSock;
-	if (sock > maxFD) maxFD = sock;
-	FD_SET(sock, &readable);
-	if (CleanPipe[0] > maxFD) maxFD = CleanPipe[0];
-	FD_SET(CleanPipe[0], &readable);
-    }
-    maxFD++;
-    for(;;) {
-	readableCopy = readable;
-	for(;;) {
-	    r = select(maxFD, &readableCopy, NULL, NULL, NULL);
-	    if (r >= 0 || errno != EINTR) break;
-	}
-	if (r < 0) {
-	    sysErr("select (relayLoop)");
-	    continue;
-	}
-
-	/* Handle session packets first */
-	for (i=0; i<NumInterfaces; i++) {
-	    if (FD_ISSET(Interfaces[i].sessionSock, &readableCopy)) {
-		relayGotSessionPacket(&Interfaces[i]);
-	    }
-	}
-
-	/* Now handle discovery packets */
-	for (i=0; i<NumInterfaces; i++) {
-	    if (FD_ISSET(Interfaces[i].discoverySock, &readableCopy)) {
-		relayGotDiscoveryPacket(&Interfaces[i]);
-	    }
-	}
-
-	/* Handle the session-cleaning process */
-	if (FD_ISSET(CleanPipe[0], &readableCopy)) {
-	    char dummy;
-	    CleanCounter = 0;
-	    read(CleanPipe[0], &dummy, 1);
-	    if (IdleTimeout) cleanSessions();
-	}
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: relayGotDiscoveryPacket
-*%ARGUMENTS:
-* iface -- interface on which packet is waiting
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a discovery packet.
-***********************************************************************/
-void
-relayGotDiscoveryPacket(PPPoEInterface const *iface)
-{
-    PPPoEPacket packet;
-    int size;
-
-    if (receivePacket(iface->discoverySock, &packet, &size) < 0) {
-	return;
-    }
-    /* Ignore unknown code/version */
-    if (packet.ver != 1 || packet.type != 1) {
-	return;
-    }
-
-    /* Validate length */
-    if (ntohs(packet.length) + HDR_SIZE > size) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-
-    /* Drop Ethernet frame padding */
-    if (size > ntohs(packet.length) + HDR_SIZE) {
-	size = ntohs(packet.length) + HDR_SIZE;
-    }
-
-    switch(packet.code) {
-    case CODE_PADT:
-	relayHandlePADT(iface, &packet, size);
-	break;
-    case CODE_PADI:
-	relayHandlePADI(iface, &packet, size);
-	break;
-    case CODE_PADO:
-	relayHandlePADO(iface, &packet, size);
-	break;
-    case CODE_PADR:
-	relayHandlePADR(iface, &packet, size);
-	break;
-    case CODE_PADS:
-	relayHandlePADS(iface, &packet, size);
-	break;
-    default:
-	syslog(LOG_ERR, "Discovery packet on %s with unknown code %d",
-	       iface->name, (int) packet.code);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: relayGotSessionPacket
-*%ARGUMENTS:
-* iface -- interface on which packet is waiting
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a session packet.
-***********************************************************************/
-void
-relayGotSessionPacket(PPPoEInterface const *iface)
-{
-    PPPoEPacket packet;
-    int size;
-    SessionHash *sh;
-    PPPoESession *ses;
-
-    if (receivePacket(iface->sessionSock, &packet, &size) < 0) {
-	return;
-    }
-
-    /* Ignore unknown code/version */
-    if (packet.ver != 1 || packet.type != 1) {
-	return;
-    }
-
-    /* Must be a session packet */
-    if (packet.code != CODE_SESS) {
-	syslog(LOG_ERR, "Session packet with code %d", (int) packet.code);
-	return;
-    }
-
-    /* Ignore session packets whose destination address isn't ours */
-    if (memcmp(packet.ethHdr.h_dest, iface->mac, ETH_ALEN)) {
-	return;
-    }
-
-    /* Validate length */
-    if (ntohs(packet.length) + HDR_SIZE > size) {
-	syslog(LOG_ERR, "Bogus PPPoE length field (%u)",
-	       (unsigned int) ntohs(packet.length));
-	return;
-    }
-
-    /* Drop Ethernet frame padding */
-    if (size > ntohs(packet.length) + HDR_SIZE) {
-	size = ntohs(packet.length) + HDR_SIZE;
-    }
-
-    /* We're in business!  Find the hash */
-    sh = findSession(packet.ethHdr.h_source, packet.session);
-    if (!sh) {
-	/* Don't log this.  Someone could be running the client and the
-	   relay on the same box. */
-	return;
-    }
-
-    /* Relay it */
-    ses = sh->ses;
-    ses->epoch = Epoch;
-    sh = sh->peer;
-    packet.session = sh->sesNum;
-    memcpy(packet.ethHdr.h_source, sh->interface->mac, ETH_ALEN);
-    memcpy(packet.ethHdr.h_dest, sh->peerMac, ETH_ALEN);
-#if 0
-    fprintf(stderr, "Relaying %02x:%02x:%02x:%02x:%02x:%02x(%s:%d) to %02x:%02x:%02x:%02x:%02x:%02x(%s:%d)\n",
-	    sh->peer->peerMac[0], sh->peer->peerMac[1], sh->peer->peerMac[2],
-	    sh->peer->peerMac[3], sh->peer->peerMac[4], sh->peer->peerMac[5],
-	    sh->peer->interface->name, ntohs(sh->peer->sesNum),
-	    sh->peerMac[0], sh->peerMac[1], sh->peerMac[2],
-	    sh->peerMac[3], sh->peerMac[4], sh->peerMac[5],
-	    sh->interface->name, ntohs(sh->sesNum));
-#endif
-    sendPacket(NULL, sh->interface->sessionSock, &packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADT
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADT packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADT packet.
-***********************************************************************/
-void
-relayHandlePADT(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    SessionHash *sh;
-    PPPoESession *ses;
-
-    sh = findSession(packet->ethHdr.h_source, packet->session);
-    if (!sh) {
-	return;
-    }
-    /* Relay the PADT to the peer */
-    sh = sh->peer;
-    ses = sh->ses;
-    packet->session = sh->sesNum;
-    memcpy(packet->ethHdr.h_source, sh->interface->mac, ETH_ALEN);
-    memcpy(packet->ethHdr.h_dest, sh->peerMac, ETH_ALEN);
-    sendPacket(NULL, sh->interface->sessionSock, packet, size);
-
-    /* Destroy the session */
-    freeSession(ses, "Received PADT");
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADI
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADI packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADI packet.
-***********************************************************************/
-void
-relayHandlePADI(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    PPPoETag tag;
-    unsigned char *loc;
-    int i, r;
-
-    int ifIndex;
-
-    /* Can a client legally be behind this interface? */
-    if (!iface->clientOK) {
-	syslog(LOG_ERR,
-	       "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Source address must be unicast */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR,
-	       "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Destination address must be broadcast */
-    if (NOT_BROADCAST(packet->ethHdr.h_dest)) {
-	syslog(LOG_ERR,
-	       "PADI packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not to a broadcast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-    
-    /* Get array index of interface */
-    ifIndex = iface - Interfaces;
-
-    loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
-    if (!loc) {
-	tag.type = htons(TAG_RELAY_SESSION_ID);
-	tag.length = htons(MY_RELAY_TAG_LEN);
-	memcpy(tag.payload, &ifIndex, sizeof(ifIndex));
-	memcpy(tag.payload+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
-	/* Add a relay tag if there's room */
-	r = addTag(packet, &tag);
-	if (r < 0) return;
-	size += r;
-    } else {
-	/* We do not re-use relay-id tags.  Drop the frame.  The RFC says the
-	   relay agent SHOULD return a Generic-Error tag, but this does not
-	   make sense for PADI packets. */
-	return;
-    }
-
-    /* Broadcast the PADI on all AC-capable interfaces except the interface
-       on which it came */
-    for (i=0; i < NumInterfaces; i++) {
-	if (iface == &Interfaces[i]) continue;
-	if (!Interfaces[i].acOK) continue;
-	memcpy(packet->ethHdr.h_source, Interfaces[i].mac, ETH_ALEN);
-	sendPacket(NULL, Interfaces[i].discoverySock, packet, size);
-    }
-    
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADO
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADO packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADO packet.
-***********************************************************************/
-void
-relayHandlePADO(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    PPPoETag tag;
-    unsigned char *loc;
-    int ifIndex;
-    int acIndex;
-
-    /* Can a server legally be behind this interface? */
-    if (!iface->acOK) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    acIndex = iface - Interfaces;
-
-    /* Source address must be unicast */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Destination address must be interface's MAC address */
-    if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
-	return;
-    }
-
-    /* Find relay tag */
-    loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
-    if (!loc) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* If it's the wrong length, ignore it */
-    if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Extract interface index */
-    memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
-    if (ifIndex < 0 || ifIndex >= NumInterfaces ||
-	!Interfaces[ifIndex].clientOK ||
-	iface == &Interfaces[ifIndex]) {
-	syslog(LOG_ERR,
-	       "PADO packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Replace Relay-ID tag with opposite-direction tag */
-    memcpy(loc+TAG_HDR_SIZE, &acIndex, sizeof(acIndex));
-    memcpy(loc+TAG_HDR_SIZE+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
-
-    /* Set destination address to MAC address in relay ID */
-    memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
-    /* Set source address to MAC address of interface */
-    memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
-    /* Send the PADO to the proper client */
-    sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADR
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADR packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADR packet.
-***********************************************************************/
-void
-relayHandlePADR(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    PPPoETag tag;
-    unsigned char *loc;
-    int ifIndex;
-    int cliIndex;
-
-    /* Can a client legally be behind this interface? */
-    if (!iface->clientOK) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    cliIndex = iface - Interfaces;
-
-    /* Source address must be unicast */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Destination address must be interface's MAC address */
-    if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
-	return;
-    }
-
-    /* Find relay tag */
-    loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
-    if (!loc) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* If it's the wrong length, ignore it */
-    if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Extract interface index */
-    memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
-    if (ifIndex < 0 || ifIndex >= NumInterfaces ||
-	!Interfaces[ifIndex].acOK ||
-	iface == &Interfaces[ifIndex]) {
-	syslog(LOG_ERR,
-	       "PADR packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Replace Relay-ID tag with opposite-direction tag */
-    memcpy(loc+TAG_HDR_SIZE, &cliIndex, sizeof(cliIndex));
-    memcpy(loc+TAG_HDR_SIZE+sizeof(ifIndex), packet->ethHdr.h_source, ETH_ALEN);
-
-    /* Set destination address to MAC address in relay ID */
-    memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
-    /* Set source address to MAC address of interface */
-    memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
-    /* Send the PADR to the proper access concentrator */
-    sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relayHandlePADS
-*%ARGUMENTS:
-* iface -- interface on which packet was received
-* packet -- the PADS packet
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Receives and processes a PADS packet.
-***********************************************************************/
-void
-relayHandlePADS(PPPoEInterface const *iface,
-		PPPoEPacket *packet,
-		int size)
-{
-    PPPoETag tag;
-    unsigned char *loc;
-    int ifIndex;
-    int acIndex;
-    PPPoESession *ses = NULL;
-    SessionHash *sh;
-
-    /* Can a server legally be behind this interface? */
-    if (!iface->acOK) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not permitted",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    acIndex = iface - Interfaces;
-
-    /* Source address must be unicast */
-    if (NOT_UNICAST(packet->ethHdr.h_source)) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s not from a unicast address",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Destination address must be interface's MAC address */
-    if (memcmp(packet->ethHdr.h_dest, iface->mac, ETH_ALEN)) {
-	return;
-    }
-
-    /* Find relay tag */
-    loc = findTag(packet, TAG_RELAY_SESSION_ID, &tag);
-    if (!loc) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* If it's the wrong length, ignore it */
-    if (ntohs(tag.length) != MY_RELAY_TAG_LEN) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s does not have correct length Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* Extract interface index */
-    memcpy(&ifIndex, tag.payload, sizeof(ifIndex));
-
-    if (ifIndex < 0 || ifIndex >= NumInterfaces ||
-	!Interfaces[ifIndex].clientOK ||
-	iface == &Interfaces[ifIndex]) {
-	syslog(LOG_ERR,
-	       "PADS packet from %02x:%02x:%02x:%02x:%02x:%02x on interface %s has invalid interface in Relay-Session-Id tag",
-	       packet->ethHdr.h_source[0],
-	       packet->ethHdr.h_source[1],
-	       packet->ethHdr.h_source[2],
-	       packet->ethHdr.h_source[3],
-	       packet->ethHdr.h_source[4],
-	       packet->ethHdr.h_source[5],
-	       iface->name);
-	return;
-    }
-
-    /* If session ID is zero, it's the AC respoding with an error.
-       Just relay it; do not create a session */
-    if (packet->session != htons(0)) {
-	/* Check for existing session */
-	sh = findSession(packet->ethHdr.h_source, packet->session);
-	if (sh) ses = sh->ses;
-
-	/* If already an existing session, assume it's a duplicate PADS.  Send
-	   the frame, but do not create a new session.  Is this the right
-	   thing to do?  Arguably, should send an error to the client and
-	   a PADT to the server, because this could happen due to a
-	   server crash and reboot. */
-
-	if (!ses) {
-	    /* Create a new session */
-	    ses = createSession(iface, &Interfaces[ifIndex],
-				packet->ethHdr.h_source,
-				loc + TAG_HDR_SIZE + sizeof(ifIndex), packet->session);
-	    if (!ses) {
-		/* Can't allocate session -- send error PADS to client and
-		   PADT to server */
-		PPPoETag hostUniq, *hu;
-		if (findTag(packet, TAG_HOST_UNIQ, &hostUniq)) {
-		    hu = &hostUniq;
-		} else {
-		    hu = NULL;
-		}
-		relaySendError(CODE_PADS, htons(0), &Interfaces[ifIndex],
-			       loc + TAG_HDR_SIZE + sizeof(ifIndex),
-			       hu, "RP-PPPoE: Relay: Unable to allocate session");
-		relaySendError(CODE_PADT, packet->session, iface,
-			       packet->ethHdr.h_source, NULL, 
-			       "RP-PPPoE: Relay: Unable to allocate session");
-		return;
-	    }
-	}
-	/* Replace session number */
-	packet->session = ses->sesNum;
-    }
-
-    /* Remove relay-ID tag */
-    removeBytes(packet, loc, MY_RELAY_TAG_LEN + TAG_HDR_SIZE);
-    size -= (MY_RELAY_TAG_LEN + TAG_HDR_SIZE);
-
-    /* Set destination address to MAC address in relay ID */
-    memcpy(packet->ethHdr.h_dest, tag.payload + sizeof(ifIndex), ETH_ALEN);
-
-    /* Set source address to MAC address of interface */
-    memcpy(packet->ethHdr.h_source, Interfaces[ifIndex].mac, ETH_ALEN);
-
-    /* Send the PADS to the proper client */
-    sendPacket(NULL, Interfaces[ifIndex].discoverySock, packet, size);
-}
-
-/**********************************************************************
-*%FUNCTION: relaySendError
-*%ARGUMENTS:
-* code -- PPPoE packet code (PADS or PADT, typically)
-* session -- PPPoE session number
-* iface -- interface on which to send frame
-* mac -- Ethernet address to which frame should be sent
-* hostUniq -- if non-NULL, a hostUniq tag to add to error frame
-* errMsg -- error message to insert into Generic-Error tag.
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Sends either a PADS or PADT packet with a Generic-Error tag and an
-* error message.
-***********************************************************************/
-void
-relaySendError(unsigned char code,
-	       UINT16_t session,
-	       PPPoEInterface const *iface,
-	       unsigned char const *mac,
-	       PPPoETag const *hostUniq,
-	       char const *errMsg)
-{
-    PPPoEPacket packet;
-    PPPoETag errTag;
-    int size;
-
-    memcpy(packet.ethHdr.h_source, iface->mac, ETH_ALEN);
-    memcpy(packet.ethHdr.h_dest, mac, ETH_ALEN);
-    packet.ethHdr.h_proto = htons(Eth_PPPOE_Discovery);
-    packet.type = 1;
-    packet.ver = 1;
-    packet.code = code;
-    packet.session = session;
-    packet.length = htons(0);
-    if (hostUniq) {
-	if (addTag(&packet, hostUniq) < 0) return;
-    }
-    errTag.type = htons(TAG_GENERIC_ERROR);
-    errTag.length = htons(strlen(errMsg));
-    strcpy(errTag.payload, errMsg);
-    if (addTag(&packet, &errTag) < 0) return;
-    size = ntohs(packet.length) + HDR_SIZE;
-    if (code == CODE_PADT) {
-	sendPacket(NULL, iface->discoverySock, &packet, size);
-    } else {
-	sendPacket(NULL, iface->sessionSock, &packet, size);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: alarmHandler
-*%ARGUMENTS:
-* sig -- signal number
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* SIGALRM handler.  Increments Epoch; if necessary, writes a byte of
-* data to the alarm pipe to trigger the stale-session cleaner.
-***********************************************************************/
-void
-alarmHandler(int sig)
-{
-    alarm(1);
-    Epoch++;
-    CleanCounter++;
-    if (CleanCounter == CleanPeriod) {
-	write(CleanPipe[1], "", 1);
-    }
-}
-
-/**********************************************************************
-*%FUNCTION: cleanSessions
-*%ARGUMENTS:
-* None
-*%RETURNS:
-* Nothing
-*%DESCRIPTION:
-* Goes through active sessions and cleans sessions idle for longer
-* than IdleTimeout seconds.
-***********************************************************************/
-void cleanSessions(void)
-{
-    PPPoESession *cur, *next;
-    cur = ActiveSessions;
-    while(cur) {
-	next = cur->next;
-	if (Epoch - cur->epoch > IdleTimeout) {
-	    /* Send PADT to each peer */
-	    relaySendError(CODE_PADT, cur->acHash->sesNum,
-			   cur->acHash->interface,
-			   cur->acHash->peerMac, NULL,
-			   "RP-PPPoE: Relay: Session exceeded idle timeout");
-	    relaySendError(CODE_PADT, cur->clientHash->sesNum,
-			   cur->clientHash->interface,
-			   cur->clientHash->peerMac, NULL,
-			   "RP-PPPoE: Relay: Session exceeded idle timeout");
-	    freeSession(cur, "Idle Timeout");
-	}
-	cur = next;
-    }
-}
diff --git a/mdk-stage1/rp-pppoe/src/relay.h b/mdk-stage1/rp-pppoe/src/relay.h
deleted file mode 100644
index d438a657f..000000000
--- a/mdk-stage1/rp-pppoe/src/relay.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/**********************************************************************
-*
-* relay.h
-*
-* Definitions for PPPoE relay
-*
-* Copyright (C) 2001 Roaring Penguin Software Inc.
-*
-* This program may be distributed according to the terms of the GNU
-* General Public License, version 2 or (at your option) any later version.
-*
-* $Id$
-*
-***********************************************************************/
-
-#include "pppoe.h"
-
-/* Description for each active Ethernet interface */
-typedef struct InterfaceStruct {
-    char name[IFNAMSIZ+1];	/* Interface name */
-    int discoverySock;		/* Socket for discovery frames */
-    int sessionSock;		/* Socket for session frames */
-    int clientOK;		/* Client requests allowed (PADI, PADR) */
-    int acOK;			/* AC replies allowed (PADO, PADS) */
-    unsigned char mac[ETH_ALEN]; /* MAC address */
-} PPPoEInterface;
-
-/* Session state for relay */
-struct SessionHashStruct;
-typedef struct SessionStruct {
-    struct SessionStruct *next;	/* Free list link */
-    struct SessionStruct *prev;	/* Free list link */
-    struct SessionHashStruct *acHash; /* Hash bucket for AC MAC/Session */
-    struct SessionHashStruct *clientHash; /* Hash bucket for client MAC/Session */
-    unsigned int epoch;		/* Epoch when last activity was seen */
-    UINT16_t sesNum;		/* Session number assigned by relay */
-} PPPoESession;
-
-/* Hash table entry to find sessions */
-typedef struct SessionHashStruct {
-    struct SessionHashStruct *next; /* Link in hash chain */
-    struct SessionHashStruct *prev; /* Link in hash chain */
-    struct SessionHashStruct *peer; /* Peer for this session */
-    PPPoEInterface const *interface;	/* Interface */
-    unsigned char peerMac[ETH_ALEN]; /* Peer's MAC address */
-    UINT16_t sesNum;		/* Session number */
-    PPPoESession *ses;		/* Session data */
-} SessionHash;
-
-/* Function prototypes */
-
-void relayGotSessionPacket(PPPoEInterface const *i);
-void relayGotDiscoveryPacket(PPPoEInterface const *i);
-PPPoEInterface *findInterface(int sock);
-unsigned int hash(unsigned char const *mac, UINT16_t sesNum);
-SessionHash *findSession(unsigned char const *mac, UINT16_t sesNum);
-void deleteHash(SessionHash *hash);
-PPPoESession *createSession(PPPoEInterface const *ac,
-			    PPPoEInterface const *cli,
-			    unsigned char const *acMac,
-			    unsigned char const *cliMac,
-			    UINT16_t acSes);
-void freeSession(PPPoESession *ses, char const *msg);
-void addInterface(char const *ifname, int clientOK, int acOK);
-void usage(char const *progname);
-void initRelay(int nsess);
-void relayLoop(void);
-void addHash(SessionHash *sh);
-void unhash(SessionHash *sh);
-
-void relayHandlePADT(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADI(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADO(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADR(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-void relayHandlePADS(PPPoEInterface const *iface, PPPoEPacket *packet, int size);
-
-int addTag(PPPoEPacket *packet, PPPoETag const *tag);
-int insertBytes(PPPoEPacket *packet, unsigned char *loc,
-		void const *bytes, int length);
-int removeBytes(PPPoEPacket *packet, unsigned char *loc,
-		int length);
-void relaySendError(unsigned char code,
-		    UINT16_t session,
-		    PPPoEInterface const *iface,
-		    unsigned char const *mac,
-		    PPPoETag const *hostUniq,
-		    char const *errMsg);
-
-void alarmHandler(int sig);
-void cleanSessions(void);
-
-#define MAX_INTERFACES 8
-#define DEFAULT_SESSIONS 5000
-
-/* Hash table size -- a prime number; gives load factor of around 6
-   for 65534 sessions */
-#define HASHTAB_SIZE 18917
diff --git a/mdk-stage1/slang/Makefile b/mdk-stage1/slang/Makefile
deleted file mode 100644
index 111062578..000000000
--- a/mdk-stage1/slang/Makefile
+++ /dev/null
@@ -1,42 +0,0 @@
- #******************************************************************************
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-top_dir = ..
-
-include $(top_dir)/Makefile.common
-
-
-LIBNAME = libslang
-
-OBJS = sltermin.o sldisply.o slutty.o slang.o slarray.o slclass.o slcmd.o slerr.o slgetkey.o slkeymap.o slmalloc.o slmath.o slmemchr.o slmemcmp.o slmemcpy.o slmemset.o slmisc.o slparse.o slprepr.o slregexp.o slrline.o slsearch.o slsmg.o slstd.o sltoken.o sltypes.o slxstrng.o slcurses.o slscroll.o slsignal.o slkeypad.o slerrno.o slstring.o slstruct.o slcmplex.o slarrfun.o slimport.o slpath.o slarith.o slassoc.o slcompat.o slposdir.o slstdio.o slproc.o sltime.o slstrops.o slbstr.o slpack.o slintall.o slistruc.o slposio.o slnspace.o slarrmis.o slospath.o slscanf.o
-
-DEFS = -Dunix -DSLANG
-
-INCS = 
-
-
-TARGETS = $(LIBNAME).a
-
-all: $(TARGETS)
-
-clean:
-	rm -f *.o *.a
-
-$(LIBNAME).a: $(OBJS)
-	ar -cru $@ $^
-	ranlib $@
-
-$(OBJS): %.o: %.c
-	$(DIET) gcc $(CFLAGS) $(DEFS) $(INCS) $(INCLUDES) -c $< -o $@
diff --git a/mdk-stage1/slang/_slang.h b/mdk-stage1/slang/_slang.h
deleted file mode 100644
index 02ee13505..000000000
--- a/mdk-stage1/slang/_slang.h
+++ /dev/null
@@ -1,743 +0,0 @@
-#ifndef _PRIVATE_SLANG_H_
-#define _PRIVATE_SLANG_H_
-/* header file for S-Lang internal structures that users do not (should not)
-   need.  Use slang.h for that purpose. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* #include "config.h" */
-#include "jdmacros.h"
-#include "sllimits.h"
-
-#ifdef VMS
-# define SLANG_SYSTEM_NAME "_VMS"
-#else
-# if defined (IBMPC_SYSTEM)
-#  define SLANG_SYSTEM_NAME "_IBMPC"
-# else
-#  define SLANG_SYSTEM_NAME "_UNIX"
-# endif
-#endif  /* VMS */
-
-/* These quantities are main_types for byte-compiled code.  They are used
- * by the inner_interp routine.  The _BC_ means byte-code.
- */
-
-#define _SLANG_BC_LVARIABLE	SLANG_LVARIABLE   /* 0x01 */
-#define _SLANG_BC_GVARIABLE	SLANG_GVARIABLE   /* 0x02 */
-#define _SLANG_BC_IVARIABLE 	SLANG_IVARIABLE   /* 0x03 */
-#define _SLANG_BC_RVARIABLE	SLANG_RVARIABLE   /* 0x04 */
-#define _SLANG_BC_INTRINSIC 	SLANG_INTRINSIC   /* 0x05 */
-#define _SLANG_BC_FUNCTION  	SLANG_FUNCTION   /* 0x06 */
-#define _SLANG_BC_MATH_UNARY	SLANG_MATH_UNARY   /* 0x07 */
-#define _SLANG_BC_APP_UNARY	SLANG_APP_UNARY   /* 0x08 */
-#define _SLANG_BC_ICONST	SLANG_ICONSTANT   /* 0x09 */
-#define _SLANG_BC_DCONST	SLANG_DCONSTANT   /* 0x0A */
-#define _SLANG_BC_PVARIABLE	SLANG_PVARIABLE   /* 0x0B */
-#define _SLANG_BC_PFUNCTION	SLANG_PFUNCTION   /* 0x0C */
-
-#define _SLANG_BC_BINARY	0x10
-#define _SLANG_BC_LITERAL	0x11           /* constant objects */
-#define _SLANG_BC_LITERAL_INT	0x12
-#define _SLANG_BC_LITERAL_STR	0x13
-#define _SLANG_BC_BLOCK		0x14
-
-/* These 3 MUST be in this order too ! */
-#define _SLANG_BC_RETURN	0x15
-#define _SLANG_BC_BREAK		0x16
-#define _SLANG_BC_CONTINUE	0x17
-
-#define _SLANG_BC_EXCH		0x18
-#define _SLANG_BC_LABEL		0x19
-#define _SLANG_BC_LOBJPTR	0x1A
-#define _SLANG_BC_GOBJPTR	0x1B
-#define _SLANG_BC_X_ERROR	0x1C
-/* These must be in this order */
-#define _SLANG_BC_X_USER0	0x1D
-#define _SLANG_BC_X_USER1	0x1E
-#define _SLANG_BC_X_USER2	0x1F
-#define _SLANG_BC_X_USER3	0x20
-#define _SLANG_BC_X_USER4	0x21
-
-#define _SLANG_BC_CALL_DIRECT		0x24
-#define _SLANG_BC_CALL_DIRECT_FRAME	0x25
-#define _SLANG_BC_UNARY			0x26
-#define _SLANG_BC_UNARY_FUNC		0x27
-
-#define _SLANG_BC_DEREF_ASSIGN		0x30
-#define _SLANG_BC_SET_LOCAL_LVALUE	0x31
-#define _SLANG_BC_SET_GLOBAL_LVALUE	0x32
-#define _SLANG_BC_SET_INTRIN_LVALUE	0x33
-#define _SLANG_BC_SET_STRUCT_LVALUE	0x34
-#define _SLANG_BC_FIELD			0x35
-#define _SLANG_BC_SET_ARRAY_LVALUE	0x36
-
-#define _SLANG_BC_LINE_NUM		0x40
-
-#define _SLANG_BC_TMP			0x50
-#define _SLANG_BC_LVARIABLE_AGET	0x60
-#define _SLANG_BC_LVARIABLE_APUT	0x61
-#define _SLANG_BC_INTEGER_PLUS		0x62
-#define _SLANG_BC_INTEGER_MINUS		0x63
-#define _SLANG_BC_ARG_LVARIABLE		0x64
-#define _SLANG_BC_EARG_LVARIABLE	0x65
-
-#define _SLANG_BC_CALL_DIRECT_INTRINSIC	0x80
-#define _SLANG_BC_INTRINSIC_CALL_DIRECT	0x81
-#define _SLANG_BC_CALL_DIRECT_LSTR	0x82
-#define _SLANG_BC_CALL_DIRECT_SLFUN	0x83
-#define _SLANG_BC_CALL_DIRECT_INTRSTOP	0x84
-#define _SLANG_BC_INTRINSIC_STOP	0x85
-#define _SLANG_BC_CALL_DIRECT_EARG_LVAR	0x86
-#define _SLANG_BC_CALL_DIRECT_LINT	0x87
-#define _SLANG_BC_CALL_DIRECT_LVAR	0x88
-
-
-/* Byte-Code Sub Types (_BCST_) */
-
-/* These are sub_types of _SLANG_BC_BLOCK */
-#define _SLANG_BCST_ERROR_BLOCK	0x01
-#define _SLANG_BCST_EXIT_BLOCK	0x02
-#define _SLANG_BCST_USER_BLOCK0	0x03
-#define _SLANG_BCST_USER_BLOCK1	0x04
-#define _SLANG_BCST_USER_BLOCK2	0x05
-#define _SLANG_BCST_USER_BLOCK3	0x06
-#define _SLANG_BCST_USER_BLOCK4	0x07
-/* The user blocks MUST be in the above order */
-#define _SLANG_BCST_LOOP	0x10
-#define _SLANG_BCST_WHILE	0x11
-#define _SLANG_BCST_FOR		0x12
-#define _SLANG_BCST_FOREVER	0x13
-#define _SLANG_BCST_CFOR	0x14
-#define _SLANG_BCST_DOWHILE	0x15
-#define _SLANG_BCST_FOREACH	0x16
-
-#define _SLANG_BCST_IF		0x20
-#define _SLANG_BCST_IFNOT	0x21
-#define _SLANG_BCST_ELSE	0x22
-#define _SLANG_BCST_ANDELSE	0x23
-#define _SLANG_BCST_ORELSE	0x24
-#define _SLANG_BCST_SWITCH	0x25
-#define _SLANG_BCST_NOTELSE	0x26
-
-/* assignment (_SLANG_BC_SET_*_LVALUE) subtypes.  The order MUST correspond
- * to the assignment token order with the ASSIGN_TOKEN as the first!
- */
-#define _SLANG_BCST_ASSIGN		0x01
-#define _SLANG_BCST_PLUSEQS		0x02
-#define _SLANG_BCST_MINUSEQS		0x03
-#define _SLANG_BCST_TIMESEQS		0x04
-#define _SLANG_BCST_DIVEQS		0x05
-#define _SLANG_BCST_BOREQS		0x06
-#define _SLANG_BCST_BANDEQS		0x07
-#define _SLANG_BCST_PLUSPLUS		0x08
-#define _SLANG_BCST_POST_PLUSPLUS	0x09
-#define _SLANG_BCST_MINUSMINUS		0x0A
-#define _SLANG_BCST_POST_MINUSMINUS	0x0B
-
-/* These use SLANG_PLUS, SLANG_MINUS, SLANG_PLUSPLUS, etc... */
-
-typedef union
-{
-#if SLANG_HAS_FLOAT
-   double double_val;
-   float float_val;
-#endif
-   long long_val;
-   unsigned long ulong_val;
-   VOID_STAR ptr_val;
-   char *s_val;
-   int int_val;
-   unsigned int uint_val;
-   SLang_MMT_Type *ref;
-   SLang_Name_Type *n_val;
-   struct _SLang_Struct_Type *struct_val;
-   struct _SLang_Array_Type *array_val;
-   short short_val;
-   unsigned short ushort_val;
-   char char_val;
-   unsigned char uchar_val;
-}
-_SL_Object_Union_Type;
-
-typedef struct _SLang_Object_Type
-{
-   unsigned char data_type;	       /* SLANG_INT_TYPE, ... */
-   _SL_Object_Union_Type v;
-}
-SLang_Object_Type;
-
-struct _SLang_MMT_Type
-{
-   unsigned char data_type;	       /* int, string, etc... */
-   VOID_STAR user_data;	       /* address of user structure */
-   unsigned int count;		       /* number of references */
-};
-
-extern int _SLang_pop_object_of_type (unsigned char, SLang_Object_Type *, int);
-
-typedef struct
-{
-   char *name;			       /* slstring */
-   SLang_Object_Type obj;
-}
-_SLstruct_Field_Type;
-
-typedef struct _SLang_Struct_Type
-{
-   _SLstruct_Field_Type *fields;
-   unsigned int nfields;	       /* number used */
-   unsigned int num_refs;
-}
-_SLang_Struct_Type;
-
-extern void _SLstruct_delete_struct (_SLang_Struct_Type *);
-extern int _SLang_push_struct (_SLang_Struct_Type *);
-extern int _SLang_pop_struct (_SLang_Struct_Type **);
-extern int _SLstruct_init (void);
-/* extern int _SLstruct_get_field (char *); */
-extern int _SLstruct_define_struct (void);
-extern int _SLstruct_define_typedef (void);
-
-extern int _SLang_pop_datatype (unsigned char *);
-extern int _SLang_push_datatype (unsigned char);
-
-struct _SLang_Ref_Type
-{
-   int is_global;
-   union
-     {
-	SLang_Name_Type *nt;
-	SLang_Object_Type *local_obj;
-     }
-   v;
-};
-
-extern int _SLang_dereference_ref (SLang_Ref_Type *);
-extern int _SLang_deref_assign (SLang_Ref_Type *);
-extern int _SLang_push_ref (int, VOID_STAR);
-
-extern int _SL_increment_frame_pointer (void);
-extern int _SL_decrement_frame_pointer (void);
-
-extern int SLang_pop(SLang_Object_Type *);
-extern void SLang_free_object (SLang_Object_Type *);
-extern int _SLanytype_typecast (unsigned char, VOID_STAR, unsigned int,
-				unsigned char, VOID_STAR);
-extern void _SLstring_intrinsic (void);
-
-
-/* These functions are used to create slstrings of a fixed length.  Be
- * very careful how they are used.  In particular, if len bytes are allocated,
- * then the string must be len characters long, no more and no less.
- */
-extern char *_SLallocate_slstring (unsigned int);
-extern char *_SLcreate_via_alloced_slstring (char *, unsigned int);
-extern void _SLunallocate_slstring (char *, unsigned int);
-extern int _SLpush_alloced_slstring (char *, unsigned int);
-  
-typedef struct 
-{
-   char **buf;
-   unsigned int max_num;
-   unsigned int num;
-   unsigned int delta_num;
-}
-_SLString_List_Type;
-extern int _SLstring_list_append (_SLString_List_Type *, char *);
-extern int _SLstring_list_init (_SLString_List_Type *, unsigned int, unsigned int);
-extern void _SLstring_list_delete (_SLString_List_Type *);
-extern int _SLstring_list_push (_SLString_List_Type *);
-
-/* This function assumes that s is an slstring. */
-extern char *_SLstring_dup_slstring (char *);
-extern int _SLang_dup_and_push_slstring (char *);
-
-
-extern int _SLang_init_import (void);
-
-/* This function checks to see if the referenced object is initialized */
-extern int _SLang_is_ref_initialized (SLang_Ref_Type *);
-extern int _SLcheck_identifier_syntax (char *);
-extern int _SLang_uninitialize_ref (SLang_Ref_Type *);
-
-extern int _SLpush_slang_obj (SLang_Object_Type *);
-
-extern char *_SLexpand_escaped_char(char *, char *);
-extern void _SLexpand_escaped_string (char *, char *, char *);
-
-/* returns a pointer to an SLstring string-- use SLang_free_slstring */
-extern char *_SLstringize_object (SLang_Object_Type *);
-extern int _SLdump_objects (char *, SLang_Object_Type *, unsigned int, int);
-
-extern SLang_Object_Type *_SLRun_Stack;
-extern SLang_Object_Type *_SLStack_Pointer;
-
-struct _SLang_NameSpace_Type
-{
-   struct _SLang_NameSpace_Type *next;
-   char *name;			       /* this is the load_type name */
-   char *namespace_name;	       /* this name is assigned by implements */
-   unsigned int table_size;
-   SLang_Name_Type **table;
-};
-extern SLang_NameSpace_Type *_SLns_allocate_namespace (char *, unsigned int);
-extern SLang_NameSpace_Type *_SLns_find_namespace (char *);
-extern int _SLns_set_namespace_name (SLang_NameSpace_Type *, char *);
-extern SLang_Array_Type *_SLnspace_apropos (SLang_NameSpace_Type *, char *, unsigned int);
-extern void _SLang_use_namespace_intrinsic (char *name);
-extern char *_SLang_cur_namespace_intrinsic (void);
-extern SLang_Array_Type *_SLang_apropos (char *, char *, unsigned int);
-extern void _SLang_implements_intrinsic (char *);
-
-extern int _SLang_Trace;
-extern int _SLstack_depth(void);
-extern char *_SLang_Current_Function_Name;
-
-extern int _SLang_trace_fun(char *);
-extern int _SLang_Compile_Line_Num_Info;
-
-extern char *_SLstring_dup_hashed_string (char *, unsigned long);
-extern unsigned long _SLcompute_string_hash (char *);
-extern char *_SLstring_make_hashed_string (char *, unsigned int, unsigned long *);
-extern void _SLfree_hashed_string (char *, unsigned int, unsigned long);
-unsigned long _SLstring_hash (unsigned char *, unsigned char *);
-extern int _SLinit_slcomplex (void);
-
-extern int _SLang_init_slstrops (void);
-extern int _SLstrops_do_sprintf_n (int);
-extern int _SLang_sscanf (void);
-extern double _SLang_atof (char *);
-extern int _SLang_init_bstring (void);
-extern int _SLang_init_sltime (void);
-extern void _SLpack (void);
-extern void _SLunpack (char *, SLang_BString_Type *);
-extern void _SLpack_pad_format (char *);
-extern unsigned int _SLpack_compute_size (char *);
-extern int _SLusleep (unsigned long);
-
-/* frees upon error.  NULL __NOT__ ok. */
-extern int _SLang_push_slstring (char *);
-
-extern unsigned char _SLarith_promote_type (unsigned char);
-extern int _SLarith_get_precedence (unsigned char);
-extern int _SLarith_typecast (unsigned char, VOID_STAR, unsigned int,
-			      unsigned char, VOID_STAR);
-
-extern int SLang_push(SLang_Object_Type *);
-extern int SLadd_global_variable (char *);
-extern void _SLang_clear_error (void);
-
-extern int _SLdo_pop (void);
-extern unsigned int _SLsys_getkey (void);
-extern int _SLsys_input_pending (int);
-#ifdef IBMPC_SYSTEM
-extern unsigned int _SLpc_convert_scancode (unsigned int, unsigned int, int);
-#define _SLTT_KEY_SHIFT		1
-#define _SLTT_KEY_CTRL		2
-#define _SLTT_KEY_ALT		4
-#endif
-
-typedef struct _SLterminfo_Type SLterminfo_Type;
-extern SLterminfo_Type *_SLtt_tigetent (char *);
-extern char *_SLtt_tigetstr (SLterminfo_Type *, char *);
-extern int _SLtt_tigetnum (SLterminfo_Type *, char *);
-extern int _SLtt_tigetflag (SLterminfo_Type *, char *);
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-extern int _SLtt_get_bce_color_offset (void);
-#endif
-extern void (*_SLtt_color_changed_hook)(void);
-
-extern unsigned char SLang_Input_Buffer [SL_MAX_INPUT_BUFFER_LEN];
-
-extern int _SLregister_types (void);
-extern SLang_Class_Type *_SLclass_get_class (unsigned char);
-extern VOID_STAR _SLclass_get_ptr_to_value (SLang_Class_Type *, SLang_Object_Type *);
-extern void _SLclass_type_mismatch_error (unsigned char, unsigned char);
-extern int _SLclass_init (void);
-extern int _SLclass_copy_class (unsigned char, unsigned char);
-
-extern unsigned char _SLclass_Class_Type [256];
-
-extern int (*_SLclass_get_typecast (unsigned char, unsigned char, int))
-(unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR);
-
-extern int (*_SLclass_get_binary_fun (int, SLang_Class_Type *, SLang_Class_Type *, SLang_Class_Type **, int))
-(int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR);
-
-extern int (*_SLclass_get_unary_fun (int, SLang_Class_Type *, SLang_Class_Type **, int))
-(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-
-extern int _SLarith_register_types (void);
-extern unsigned char _SLarith_Arith_Types [];
-extern unsigned char _SLarith_Is_Arith_Type [256];
-extern int _SLarith_bin_op (SLang_Object_Type *, SLang_Object_Type *, int);
-
-extern int _SLarray_add_bin_op (unsigned char);
-
-extern int _SLang_call_funptr (SLang_Name_Type *);
-extern void _SLset_double_format (char *);
-extern SLang_Name_Type *_SLlocate_global_name (char *);
-extern SLang_Name_Type *_SLlocate_name (char *);
-
-extern char *_SLdefines[];
-
-#define SL_ERRNO_NOT_IMPLEMENTED	0x7FFF
-extern int _SLerrno_errno;
-extern int _SLerrno_init (void);
-
-extern int _SLstdio_fdopen (char *, int, char *);
-
-extern void _SLstruct_pop_args (int *);
-extern void _SLstruct_push_args (SLang_Array_Type *);
-
-extern int _SLarray_aput (void);
-extern int _SLarray_aget (void);
-extern int _SLarray_inline_implicit_array (void);
-extern int _SLarray_inline_array (void);
-extern int _SLarray_wildcard_array (void);
-
-extern int
-_SLarray_typecast (unsigned char, VOID_STAR, unsigned int,
-		   unsigned char, VOID_STAR, int);
-
-extern int _SLarray_aput_transfer_elem (SLang_Array_Type *, int *,
-					VOID_STAR, unsigned int, int);
-extern int _SLarray_aget_transfer_elem (SLang_Array_Type *, int *,
-					VOID_STAR, unsigned int, int);
-extern void _SLarray_free_array_elements (SLang_Class_Type *, VOID_STAR, unsigned int);
-
-extern SLang_Foreach_Context_Type *
-_SLarray_cl_foreach_open (unsigned char, unsigned int);
-extern void _SLarray_cl_foreach_close (unsigned char, SLang_Foreach_Context_Type *);
-extern int _SLarray_cl_foreach (unsigned char, SLang_Foreach_Context_Type *);
-
-extern int _SLarray_matrix_multiply (void);
-extern void (*_SLang_Matrix_Multiply)(void);
-
-extern int _SLarray_init_slarray (void);
-extern SLang_Array_Type *
-SLang_create_array1 (unsigned char, int, VOID_STAR, int *, unsigned int, int);
-
-extern int _SLcompile_push_context (SLang_Load_Type *);
-extern int _SLcompile_pop_context (void);
-extern int _SLang_Auto_Declare_Globals;
-
-typedef struct
-{
-   union
-     {
-	long long_val;
-	char *s_val;		       /* Used for IDENT_TOKEN, FLOAT, etc...  */
-	SLang_BString_Type *b_val;
-     } v;
-   int free_sval_flag;
-   unsigned int num_refs;
-   unsigned long hash;
-#if _SLANG_HAS_DEBUG_CODE
-   int line_number;
-#endif
-   unsigned char type;
-}
-_SLang_Token_Type;
-
-extern void _SLcompile (_SLang_Token_Type *);
-extern void (*_SLcompile_ptr)(_SLang_Token_Type *);
-
-/* *** TOKENS *** */
-
-/* Note that that tokens corresponding to ^J, ^M, and ^Z should not be used.
- * This is because a file that contains any of these characters will
- * have an OS dependent interpretation, e.g., ^Z is EOF on MSDOS.
- */
-
-/* Special tokens */
-#define EOF_TOKEN	0x01
-#define RPN_TOKEN	0x02
-#define NL_TOKEN	0x03
-#define NOP_TOKEN	0x05
-#define FARG_TOKEN	0x06
-#define TMP_TOKEN	0x07
-
-#define RESERVED1_TOKEN	0x0A	       /* \n */
-#define RESERVED2_TOKEN	0x0D	       /* \r */
-
-/* Literal tokens */
-#define CHAR_TOKEN	0x10
-#define UCHAR_TOKEN	0x11
-#define SHORT_TOKEN	0x12
-#define USHORT_TOKEN	0x13
-#define INT_TOKEN	0x14
-#define UINT_TOKEN	0x15
-#define LONG_TOKEN	0x16
-#define ULONG_TOKEN	0x17
-#define IS_INTEGER_TOKEN(x) ((x >= CHAR_TOKEN) && (x <= ULONG_TOKEN))
-#define FLOAT_TOKEN	0x18
-#define DOUBLE_TOKEN	0x19
-#define RESERVED3_TOKEN	0x1A	       /* ^Z */
-#define COMPLEX_TOKEN	0x1B
-#define STRING_TOKEN    0x1C
-#define BSTRING_TOKEN	0x1D
-#define _BSTRING_TOKEN	0x1E	       /* byte-compiled BSTRING */
-#define ESC_STRING_TOKEN	0x1F
-
-/* Tokens that can be LVALUES */
-#define IDENT_TOKEN	0x20
-#define ARRAY_TOKEN	0x21
-#define DOT_TOKEN	0x22
-#define IS_LVALUE_TOKEN (((t) <= DOT_TOKEN) && ((t) >= IDENT_TOKEN))
-
-/* do not use these values */
-#define RESERVED4_TOKEN	0x23	       /* # */
-#define RESERVED5_TOKEN 0x25	       /* % */
-
-/* Flags for struct fields */
-#define STATIC_TOKEN	0x26
-#define READONLY_TOKEN	0x27
-#define PRIVATE_TOKEN	0x28
-#define PUBLIC_TOKEN	0x29
-
-/* Punctuation tokens */
-#define OBRACKET_TOKEN	0x2a
-#define CBRACKET_TOKEN	0x2b
-#define OPAREN_TOKEN	0x2c
-#define CPAREN_TOKEN	0x2d
-#define OBRACE_TOKEN	0x2e
-#define CBRACE_TOKEN	0x2f
-
-#define COMMA_TOKEN	0x31
-#define SEMICOLON_TOKEN	0x32
-#define COLON_TOKEN	0x33
-#define NAMESPACE_TOKEN	0x34
-
-/* Operators */
-#define POW_TOKEN	0x38
-
-/* The order here must match the order in the Binop_Level table in slparse.c */
-#define FIRST_BINARY_OP	0x39
-#define ADD_TOKEN	0x39
-#define SUB_TOKEN	0x3a
-#define TIMES_TOKEN	0x3b
-#define DIV_TOKEN	0x3c
-#define LT_TOKEN	0x3d
-#define LE_TOKEN	0x3e
-#define GT_TOKEN	0x3f
-#define GE_TOKEN	0x40
-#define EQ_TOKEN	0x41
-#define NE_TOKEN	0x42
-#define AND_TOKEN	0x43
-#define OR_TOKEN	0x44
-#define MOD_TOKEN	0x45
-#define BAND_TOKEN	0x46
-#define SHL_TOKEN	0x47
-#define SHR_TOKEN	0x48
-#define BXOR_TOKEN	0x49
-#define BOR_TOKEN	0x4a
-#define POUND_TOKEN	0x4b	       /* matrix multiplication */
-
-#define LAST_BINARY_OP	 0x4b
-#define IS_BINARY_OP(t)	 ((t >= FIRST_BINARY_OP) && (t <= LAST_BINARY_OP))
-
-/* unary tokens -- but not all of them (see grammar) */
-#define DEREF_TOKEN	 0x4d
-#define NOT_TOKEN	 0x4e
-#define BNOT_TOKEN	 0x4f
-
-#define IS_INTERNAL_FUNC(t)	((t >= 0x50) && (t <= 0x56))
-#define POP_TOKEN	 0x50
-#define CHS_TOKEN	 0x51
-#define SIGN_TOKEN	 0x52
-#define ABS_TOKEN	 0x53
-#define SQR_TOKEN	 0x54
-#define MUL2_TOKEN	 0x55
-#define EXCH_TOKEN	 0x56
-
-/* Assignment tokens.  Note: these must appear with sequential values.
- * The order here must match the specific lvalue assignments below.
- * These tokens are used by rpn routines in slang.c.  slparse.c maps them
- * onto the specific lvalue tokens while parsing infix.
- * Also the assignment _SLANG_BCST_ assumes this order
- */
-#define ASSIGN_TOKEN		0x57
-#define PLUSEQS_TOKEN	 	0x58
-#define MINUSEQS_TOKEN		0x59
-#define TIMESEQS_TOKEN		0x5A
-#define DIVEQS_TOKEN		0x5B
-#define BOREQS_TOKEN		0x5C
-#define BANDEQS_TOKEN		0x5D
-#define PLUSPLUS_TOKEN		0x5E
-#define POST_PLUSPLUS_TOKEN	0x5F
-#define MINUSMINUS_TOKEN	0x60
-#define POST_MINUSMINUS_TOKEN	0x61
-
-/* Directives */
-#define FIRST_DIRECTIVE_TOKEN	0x62
-#define IFNOT_TOKEN	0x62
-#define IF_TOKEN	0x63
-#define ELSE_TOKEN	0x64
-#define FOREVER_TOKEN	0x65
-#define WHILE_TOKEN	0x66
-#define FOR_TOKEN	0x67
-#define _FOR_TOKEN	0x68
-#define LOOP_TOKEN	0x69
-#define SWITCH_TOKEN	0x6A
-#define DOWHILE_TOKEN	0x6B
-#define ANDELSE_TOKEN	0x6C
-#define ORELSE_TOKEN	0x6D
-#define ERRBLK_TOKEN	0x6E
-#define EXITBLK_TOKEN	0x6F
-/* These must be sequential */
-#define USRBLK0_TOKEN	0x70
-#define USRBLK1_TOKEN	0x71
-#define USRBLK2_TOKEN	0x72
-#define USRBLK3_TOKEN	0x73
-#define USRBLK4_TOKEN	0x74
-
-#define CONT_TOKEN	0x75
-#define BREAK_TOKEN	0x76
-#define RETURN_TOKEN	0x77
-
-#define CASE_TOKEN	0x78
-#define DEFINE_TOKEN	0x79
-#define DO_TOKEN	0x7a
-#define VARIABLE_TOKEN	0x7b
-#define GVARIABLE_TOKEN	0x7c
-#define _REF_TOKEN	0x7d
-#define PUSH_TOKEN	0x7e
-#define STRUCT_TOKEN	0x7f
-#define TYPEDEF_TOKEN	0x80
-#define NOTELSE_TOKEN	0x81
-#define DEFINE_STATIC_TOKEN	0x82
-#define FOREACH_TOKEN	0x83
-#define USING_TOKEN	0x84
-#define DEFINE_PRIVATE_TOKEN	0x85
-#define DEFINE_PUBLIC_TOKEN	0x86
-
-/* Note: the order here must match the order of the generic assignment tokens.
- * Also, the first token of each group must be the ?_ASSIGN_TOKEN.
- * slparse.c exploits this order, as well as slang.h.
- */
-#define FIRST_ASSIGN_TOKEN		0x90
-#define _STRUCT_ASSIGN_TOKEN		0x90
-#define _STRUCT_PLUSEQS_TOKEN		0x91
-#define _STRUCT_MINUSEQS_TOKEN		0x92
-#define _STRUCT_TIMESEQS_TOKEN		0x93
-#define _STRUCT_DIVEQS_TOKEN		0x94
-#define _STRUCT_BOREQS_TOKEN		0x95
-#define _STRUCT_BANDEQS_TOKEN		0x96
-#define _STRUCT_PLUSPLUS_TOKEN		0x97
-#define _STRUCT_POST_PLUSPLUS_TOKEN	0x98
-#define _STRUCT_MINUSMINUS_TOKEN	0x99
-#define _STRUCT_POST_MINUSMINUS_TOKEN	0x9A
-
-#define _ARRAY_ASSIGN_TOKEN		0xA0
-#define _ARRAY_PLUSEQS_TOKEN		0xA1
-#define _ARRAY_MINUSEQS_TOKEN		0xA2
-#define _ARRAY_TIMESEQS_TOKEN		0xA3
-#define _ARRAY_DIVEQS_TOKEN		0xA4
-#define _ARRAY_BOREQS_TOKEN		0xA5
-#define _ARRAY_BANDEQS_TOKEN		0xA6
-#define _ARRAY_PLUSPLUS_TOKEN		0xA7
-#define _ARRAY_POST_PLUSPLUS_TOKEN	0xA8
-#define _ARRAY_MINUSMINUS_TOKEN		0xA9
-#define _ARRAY_POST_MINUSMINUS_TOKEN	0xAA
-
-#define _SCALAR_ASSIGN_TOKEN		0xB0
-#define _SCALAR_PLUSEQS_TOKEN		0xB1
-#define _SCALAR_MINUSEQS_TOKEN		0xB2
-#define _SCALAR_TIMESEQS_TOKEN		0xB3
-#define _SCALAR_DIVEQS_TOKEN		0xB4
-#define _SCALAR_BOREQS_TOKEN		0xB5
-#define _SCALAR_BANDEQS_TOKEN		0xB6
-#define _SCALAR_PLUSPLUS_TOKEN		0xB7
-#define _SCALAR_POST_PLUSPLUS_TOKEN	0xB8
-#define _SCALAR_MINUSMINUS_TOKEN	0xB9
-#define _SCALAR_POST_MINUSMINUS_TOKEN	0xBA
-
-#define _DEREF_ASSIGN_TOKEN		0xC0
-#define _DEREF_PLUSEQS_TOKEN		0xC1
-#define _DEREF_MINUSEQS_TOKEN		0xC2
-#define _DEREF_TIMESEQS_TOKEN		0xC3
-#define _DEREF_DIVEQS_TOKEN		0xC4
-#define _DEREF_BOREQS_TOKEN		0xC5
-#define _DEREF_BANDEQS_TOKEN		0xC6
-#define _DEREF_PLUSPLUS_TOKEN		0xC7
-#define _DEREF_POST_PLUSPLUS_TOKEN	0xC8
-#define _DEREF_MINUSMINUS_TOKEN		0xC9
-#define _DEREF_POST_MINUSMINUS_TOKEN	0xCA
-
-#define LAST_ASSIGN_TOKEN		0xCA
-#define IS_ASSIGN_TOKEN(t) (((t)>=FIRST_ASSIGN_TOKEN)&&((t)<=LAST_ASSIGN_TOKEN))
-
-#define _INLINE_ARRAY_TOKEN		0xE0
-#define _INLINE_IMPLICIT_ARRAY_TOKEN	0xE1
-#define _NULL_TOKEN			0xE2
-#define _INLINE_WILDCARD_ARRAY_TOKEN	0xE3
-
-#define LINE_NUM_TOKEN			0xFC
-#define ARG_TOKEN	 		0xFD
-#define EARG_TOKEN	 		0xFE
-#define NO_OP_LITERAL			0xFF
-
-typedef struct
-{
-   /* sltoken.c */
-   /* SLang_eval_object */
-   SLang_Load_Type *llt;
-   SLPreprocess_Type *this_slpp;
-   /* prep_get_char() */
-   char *input_line;
-   char cchar;
-   /* get_token() */
-   int want_nl_token;
-
-   /* slparse.c */
-   _SLang_Token_Type ctok;
-   int block_depth;
-   int assignment_expression;
-
-   /* slang.c : SLcompile() */
-   _SLang_Token_Type save_token;
-   _SLang_Token_Type next_token;
-   void (*slcompile_ptr)(_SLang_Token_Type *);
-}
-_SLEval_Context;
-
-extern int _SLget_token (_SLang_Token_Type *);
-extern void _SLparse_error (char *, _SLang_Token_Type *, int);
-extern void _SLparse_start (SLang_Load_Type *);
-extern int _SLget_rpn_token (_SLang_Token_Type *);
-extern void _SLcompile_byte_compiled (void);
-
-extern int (*_SLprep_eval_hook) (char *);
-
-#ifdef HAVE_VSNPRINTF
-#define _SLvsnprintf vsnprintf
-#else
-extern int _SLvsnprintf (char *, unsigned int, char *, va_list);
-#endif
-
-#ifdef HAVE_SNPRINTF
-# define _SLsnprintf snprintf
-#else
-extern int _SLsnprintf (char *, unsigned int, char *, ...);
-#endif
-
-#undef _INLINE_
-#if defined(__GNUC__) && _SLANG_USE_INLINE_CODE
-# define _INLINE_ __inline__
-#else
-# define _INLINE_
-#endif
-
-
-#endif				       /* _PRIVATE_SLANG_H_ */
diff --git a/mdk-stage1/slang/config.h b/mdk-stage1/slang/config.h
deleted file mode 100644
index a5ab3273c..000000000
--- a/mdk-stage1/slang/config.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/* src/sysconf.h.  Generated automatically by configure.  */
-/* -*- c -*- */
-/* Note: this is for unix only. */
-
-#ifndef SL_CONFIG_H
-#define SL_CONFIG_H
-
-/* define if you have stdlib.h */
-#define HAVE_STDLIB_H 1
-
-/* define if you have unistd.h */
-#define HAVE_UNISTD_H 1
-
-/* define if you have termios.h */
-#define HAVE_TERMIOS_H 1
-
-/* define if you have memory.h */
-#define HAVE_MEMORY_H 1
-
-/* define if you have malloc.h */
-#define HAVE_MALLOC_H 1
-
-/* define if you have memset */
-#define HAVE_MEMSET 1
-
-/* define if you have memcpy */
-#define HAVE_MEMCPY 1
-
-//#define HAVE_SETLOCALE 1
-//#define HAVE_LOCALE_H 1
-
-#define HAVE_VFSCANF 1
-
-/* define if you have fcntl.h */
-#define HAVE_FCNTL_H 1
-
-/* Define if you have the vsnprintf, snprintf functions and they return
- * EOF upon failure.
- */
-#define HAVE_VSNPRINTF 1
-#define HAVE_SNPRINTF 1
-
-/* define if you have sys/fcntl.h */
-#define HAVE_SYS_FCNTL_H 1
-
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_SYS_WAIT_H 1
-#define HAVE_SYS_TIMES_H 1
-
-/* Set these to the appropriate values */
-#define SIZEOF_SHORT 2
-#define SIZEOF_INT 4
-#define SIZEOF_LONG 4
-#define SIZEOF_FLOAT 4
-#define SIZEOF_DOUBLE 8
-
-/* define if you have these. */
-#define HAVE_ATEXIT 1
-#define HAVE_ON_EXIT 1
-#define HAVE_PUTENV 1
-#define HAVE_GETCWD 1
-#define HAVE_TCGETATTR 1
-#define HAVE_TCSETATTR 1
-#define HAVE_CFGETOSPEED 1
-#define HAVE_LSTAT 1
-#define HAVE_KILL 1
-#define HAVE_CHOWN 1
-#define HAVE_VSNPRINTF 1
-#define HAVE_POPEN 1
-#define HAVE_UMASK 1
-#define HAVE_READLINK 1
-#define HAVE_TIMES 1
-#define HAVE_GMTIME 1
-#define HAVE_MKFIFO 1
-
-#define HAVE_GETPPID 1
-#define HAVE_GETGID 1
-#define HAVE_GETEGID 1
-#define HAVE_GETEUID 1
-/* #undef HAVE_GETUID */
-
-#define HAVE_SETGID 1 
-#define HAVE_SETPGID 1
-#define HAVE_SETUID 1
-
-#define HAVE_ACOSH 1
-#define HAVE_ASINH 1
-#define HAVE_ATANH 1
-
-#define HAVE_DIRENT_H 1
-/* #undef HAVE_SYS_NDIR_H */
-/* #undef HAVE_SYS_DIR_H */
-/* #undef HAVE_NDIR_H */
-
-#define HAVE_DLFCN_H 1
-
-#define HAVE_SYS_UTSNAME_H 1
-#define HAVE_UNAME 1
-
-/* These two are needed on DOS-like systems.  Unix does not require them.
- * They are included here for consistency.
- *
-#define HAVE_IO_H
-#define HAVE_PROCESS_H
- */
-
-/* #undef USE_TERMCAP */
-
-/* #undef mode_t */
-/* #undef uid_t */
-/* #undef pid_t */
-/* #undef gid_t */
-
-/* Do we have posix signals? */
-#define HAVE_SIGACTION 1
-#define HAVE_SIGPROCMASK 1
-#define HAVE_SIGEMPTYSET 1
-#define HAVE_SIGADDSET 1
-
-#if defined(HAVE_SIGADDSET) && defined(HAVE_SIGEMPTYSET)
-# if defined(HAVE_SIGACTION) && defined(HAVE_SIGPROCMASK)
-#  define SLANG_POSIX_SIGNALS
-# endif
-#endif
-
-/* Define if you need to in order for stat and other things to work.  */
-/* #undef _POSIX_SOURCE */
-
-#ifdef _AIX
-# ifndef _POSIX_SOURCE
-#  define _POSIX_SOURCE 1
-# endif
-# ifndef _ALL_SOURCE
-#  define _ALL_SOURCE
-# endif
-/* This may generate warnings but the fact is that without it, xlc will 
- * INCORRECTLY inline many str* functions. */
-/* # undef __STR__ */
-#endif
-
-/* define USE_TERMCAP if you want to use it instead of terminfo. */
-#if defined(sequent) || defined(NeXT)
-# ifndef USE_TERMCAP
-#  define USE_TERMCAP
-# endif
-#endif
-
-#if defined(ultrix) && !defined(__GNUC__)
-# ifndef NO_PROTOTYPES
-#  define NO_PROTOTYPES
-# endif
-#endif
-
-#ifndef unix
-# define unix 1
-#endif
-
-#ifndef __unix__
-# define __unix__ 1
-#endif
-
-#define _SLANG_SOURCE_	1
-#endif /* SL_CONFIG_H */
diff --git a/mdk-stage1/slang/jdmacros.h b/mdk-stage1/slang/jdmacros.h
deleted file mode 100644
index 70d491b78..000000000
--- a/mdk-stage1/slang/jdmacros.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _JD_MACROS_H_
-#define _JD_MACROS_H_
-
-#ifndef SLMEMSET
-# ifdef HAVE_MEMSET
-#  define SLMEMSET memset
-# else
-#  define SLMEMSET SLmemset
-# endif
-#endif
-
-#ifndef SLMEMCHR
-# ifdef HAVE_MEMCHR
-#  define SLMEMCHR memchr
-# else
-#  define SLMEMCHR SLmemchr
-# endif
-#endif
-
-#ifndef SLMEMCPY
-# ifdef HAVE_MEMCPY
-#  define SLMEMCPY memcpy
-# else
-#  define SLMEMCPY SLmemcpy
-# endif
-#endif
-
-/* Note:  HAVE_MEMCMP requires an unsigned memory comparison!!!  */
-#ifndef SLMEMCMP
-# ifdef HAVE_MEMCMP
-#  define SLMEMCMP memcmp
-# else
-#  define SLMEMCMP SLmemcmp
-# endif
-#endif
-
-#ifndef SLFREE
-# define SLFREE free
-#endif
-
-#ifndef SLMALLOC
-# define SLMALLOC malloc
-#endif
-
-#ifndef SLCALLOC
-# define SLCALLOC calloc
-#endif
-
-#ifndef SLREALLOC
-# define SLREALLOC realloc
-#endif
-
-#endif				       /* _JD_MACROS_H_ */
diff --git a/mdk-stage1/slang/keywhash.c b/mdk-stage1/slang/keywhash.c
deleted file mode 100644
index 17d94d5a3..000000000
--- a/mdk-stage1/slang/keywhash.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/* Perfect hash generated by command line:
- * ./a.out 1
- */
-#define MIN_HASH_VALUE	2
-#define MAX_HASH_VALUE	118
-#define MIN_KEYWORD_LEN 2
-#define MAX_KEYWORD_LEN 11
-
-static unsigned char Keyword_Hash_Table [256] =
-{
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119,   1, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-    9,   7,   1,   8,   2, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119,   0,   0, 119,   0, 119, 119, 119,   7, 119,   0,   0, 119, 119,   0, 
-  119, 119,   0,   0,   0,   0, 119, 119,   0, 119, 119, 119, 119, 119, 119,   2, 
-  119,  41,   1,   1,   9,   0,  55,   8,   0,   0, 119,   0,  27,   0,   0,   0, 
-    7,   2,   0,  21,   0,   0,   0,   3,   2,   0, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 
-  119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, 119
-};
-
-static unsigned char keyword_hash (char *s, unsigned int len)
-{
-   unsigned int sum;
-
-   sum = len;
-   while (len)
-     {
-	len--;
-	sum += (unsigned int) Keyword_Hash_Table [(unsigned char)s[len]];
-     }
-   return sum;
-}
-
-typedef struct
-{
-   char *name;
-   unsigned int type;
-}
-Keyword_Table_Type;
-
-static Keyword_Table_Type Keyword_Table [/* 117 */] =
-{
-   {"or",	OR_TOKEN},
-   {"not",	NOT_TOKEN},
-   {NULL,0},
-   {"xor",	BXOR_TOKEN},
-   {"return",	RETURN_TOKEN},
-   {"exch",	EXCH_TOKEN},
-   {NULL,0},
-   {"continue",	CONT_TOKEN},
-   {NULL,0},
-   {"do",	DO_TOKEN},
-   {"mod",	MOD_TOKEN},
-   {"ERROR_BLOCK",	ERRBLK_TOKEN},
-   {"USER_BLOCK2",	USRBLK2_TOKEN},
-   {"USER_BLOCK4",	USRBLK4_TOKEN},
-   {"__tmp",	TMP_TOKEN},
-   {"pop",	POP_TOKEN},
-   {NULL,0},
-   {"EXIT_BLOCK",	EXITBLK_TOKEN},
-   {"USER_BLOCK1",	USRBLK1_TOKEN},
-   {"USER_BLOCK3",	USRBLK3_TOKEN},
-   {"USER_BLOCK0",	USRBLK0_TOKEN},
-   {NULL,0},
-   {"shr",	SHR_TOKEN},
-   {"chs",	CHS_TOKEN},
-   {"sqr",	SQR_TOKEN},
-   {NULL,0},
-   {"struct",	STRUCT_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {"switch",	SWITCH_TOKEN},
-   {"mul2",	MUL2_TOKEN},
-   {"sign",	SIGN_TOKEN},
-   {"using",	USING_TOKEN},
-   {"while",	WHILE_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {"loop",	LOOP_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"public",	PUBLIC_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"break",	BREAK_TOKEN},
-   {NULL,0},
-   {"do_while",	DOWHILE_TOKEN},
-   {NULL,0},
-   {"shl",	SHL_TOKEN},
-   {"else",	ELSE_TOKEN},
-   {"and",	AND_TOKEN},
-   {"orelse",	ORELSE_TOKEN},
-   {"private",	PRIVATE_TOKEN},
-   {NULL,0},
-   {"if",	IF_TOKEN},
-   {"for",	FOR_TOKEN},
-   {"!if",	IFNOT_TOKEN},
-   {NULL,0},
-   {"_for",	_FOR_TOKEN},
-   {"forever",	FOREVER_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"abs",	ABS_TOKEN},
-   {"case",	CASE_TOKEN},
-   {NULL,0},
-   {"static",	STATIC_TOKEN},
-   {"define",	DEFINE_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"typedef",	TYPEDEF_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"foreach",	FOREACH_TOKEN},
-   {"andelse",	ANDELSE_TOKEN},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {NULL,0},
-   {"variable",	VARIABLE_TOKEN},
-};
-
-static Keyword_Table_Type *is_keyword (char *str, unsigned int len)
-{
-   unsigned int hash;
-   char *name;
-   Keyword_Table_Type *kw;
-
-   if ((len < MIN_KEYWORD_LEN)
-       || (len > MAX_KEYWORD_LEN))
-     return NULL;
-
-   hash = keyword_hash (str, len);
-   if ((hash > MAX_HASH_VALUE) || (hash < MIN_HASH_VALUE))
-     return NULL;
-
-   kw = &Keyword_Table[hash - MIN_HASH_VALUE];
-   if ((NULL != (name = kw->name))
-       && (*str == *name)
-       && (0 == strcmp (str, name)))
-     return kw;
-   return NULL;
-}
diff --git a/mdk-stage1/slang/sl-feat.h b/mdk-stage1/slang/sl-feat.h
deleted file mode 100644
index 511d72451..000000000
--- a/mdk-stage1/slang/sl-feat.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* Setting this to 1 enables automatic support for associative arrays.
- * If this is set to 0, an application must explicitly enable associative
- * array support via SLang_init_slassoc.
- */
-#define SLANG_HAS_ASSOC_ARRAYS		1
-
-#define SLANG_HAS_COMPLEX		1
-#define SLANG_HAS_FLOAT			1
-
-/* This is the old space-speed trade off.  To reduce memory usage and code
- * size, set this to zero.
- */
-#define _SLANG_OPTIMIZE_FOR_SPEED	2
-
-#define _SLANG_USE_INLINE_CODE		1
-
-/* This is experimental.  It adds extra information for tracking down
- * errors.
- */
-#define _SLANG_HAS_DEBUG_CODE		1
-
-/* Allow optimizations based upon the __tmp operator. */
-#define _SLANG_USE_TMP_OPTIMIZATION	1
-
-/* Setting this to one will map 8 bit vtxxx terminals to 7 bit.  Terminals
- * such as the vt320 can be set up to output the two-character escape sequence
- * encoded as 'ESC [' as single character.  Setting this variable to 1 will
- * insert code to map such characters to the 7 bit equivalent.
- * This affects just input characters in the range 128-160 on non PC
- * systems.
- */
-#if defined(VMS) || defined(AMIGA)
-# define _SLANG_MAP_VTXXX_8BIT	1
-#else
-# define _SLANG_MAP_VTXXX_8BIT	0
-#endif
-
-/* Add support for color terminals that cannot do background color erases
- * Such terminals are poorly designed and are slowly disappearing but they
- * are still quite common.  For example, screen is one of them!
- * 
- * This is experimental.  In particular, it is not known to work if 
- * KANJI suupport is enabled.
- */
-#if !defined(IBMPC_SYSTEM)
-# define SLTT_HAS_NON_BCE_SUPPORT	1
-#else
-# define SLTT_HAS_NON_BCE_SUPPORT	0
-#endif
-
-/* If you want slang to assume that an xterm always has the background color
- * erase feature, then set this to 1.  Otherwise, it will check the terminfo
- * database.  This may or may not be a good idea since most good color xterms
- * support bce but many terminfo systems do not support it.
- */
-#define SLTT_XTERM_ALWAYS_BCE		0
-  
-/* Set this to 1 to enable Kanji support.  See above comment. */
-#define SLANG_HAS_KANJI_SUPPORT		0
-
diff --git a/mdk-stage1/slang/slang.c b/mdk-stage1/slang/slang.c
deleted file mode 100644
index 6edc7df37..000000000
--- a/mdk-stage1/slang/slang.c
+++ /dev/null
@@ -1,5547 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* slang.c  --- guts of S-Lang interpreter */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#define USE_COMBINED_BYTECODES	0
-
-struct _SLBlock_Type;
-
-typedef struct
-{
-   struct _SLBlock_Type *body;
-   unsigned int num_refs;
-}
-_SLBlock_Header_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   union
-     {
-	_SLBlock_Header_Type *header;    /* body of function */
-	char *autoload_filename;
-     }
-   v;
-#if _SLANG_HAS_DEBUG_CODE
-   char *file;
-#endif
-#define SLANG_MAX_LOCAL_VARIABLES 254
-#define AUTOLOAD_NUM_LOCALS (SLANG_MAX_LOCAL_VARIABLES + 1)
-   unsigned char nlocals;	       /* number of local variables */
-   unsigned char nargs;		       /* number of arguments */
-}
-_SLang_Function_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   SLang_Object_Type obj;
-}
-SLang_Global_Var_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   int local_var_number;
-}
-SLang_Local_Var_Type;
-
-typedef struct _SLBlock_Type
-{
-   unsigned char bc_main_type;
-   unsigned char bc_sub_type;
-   union
-     {
-	struct _SLBlock_Type *blk;
-	int i_blk;
-
-	SLang_Name_Type *nt_blk;
-	SLang_App_Unary_Type *nt_unary_blk;
-	SLang_Intrin_Var_Type *nt_ivar_blk;
-	SLang_Intrin_Fun_Type *nt_ifun_blk;
-	SLang_Global_Var_Type *nt_gvar_blk;
-	SLang_IConstant_Type *iconst_blk;
-	SLang_DConstant_Type *dconst_blk;
-	_SLang_Function_Type *nt_fun_blk;
-
-	VOID_STAR ptr_blk;
-	char *s_blk;
-	SLang_BString_Type *bs_blk;
-
-#if SLANG_HAS_FLOAT
-	double *double_blk;		       /*literal double is a pointer */
-#endif
-	float float_blk;
-	long l_blk;
-	struct _SLang_Struct_Type *struct_blk;
-	int (*call_function)(void);
-     }
-   b;
-}
-SLBlock_Type;
-
-/* Debugging and tracing variables */
-
-void (*SLang_Enter_Function)(char *) = NULL;
-void (*SLang_Exit_Function)(char *) = NULL;
-/* If non null, these call C functions before and after a slang function. */
-
-int _SLang_Trace = 0;
-/* If _SLang_Trace = -1, do not trace intrinsics */
-static int Trace_Mode = 0;
-
-static char *Trace_Function;	       /* function to be traced */
-int SLang_Traceback = 0;
-/* non zero means do traceback.  If less than 0, do not show local variables */
-
-/* These variables handle _NARGS processing by the parser */
-int SLang_Num_Function_Args;
-static int *Num_Args_Stack;
-static unsigned int Recursion_Depth;
-static SLang_Object_Type *Frame_Pointer;
-static int Next_Function_Num_Args;
-static unsigned int Frame_Pointer_Depth;
-static unsigned int *Frame_Pointer_Stack;
-
-static int Lang_Break_Condition = 0;
-/* true if any one below is true.  This keeps us from testing 3 variables.
- * I know this can be perfomed with a bitmapped variable, but...
- */
-static int Lang_Break = 0;
-static int Lang_Return = 0;
-/* static int Lang_Continue = 0; */
-
-SLang_Object_Type *_SLRun_Stack;
-SLang_Object_Type *_SLStack_Pointer;
-static SLang_Object_Type *_SLStack_Pointer_Max;
-
-/* Might want to increase this. */
-static SLang_Object_Type Local_Variable_Stack[SLANG_MAX_LOCAL_STACK];
-static SLang_Object_Type *Local_Variable_Frame = Local_Variable_Stack;
-
-static void free_function_header (_SLBlock_Header_Type *);
-
-void (*SLang_Dump_Routine)(char *);
-
-static void call_dump_routine (char *fmt, ...)
-{
-   char buf[1024];
-   va_list ap;
-
-   va_start (ap, fmt);
-   if (SLang_Dump_Routine != NULL)
-     {
-	(void) _SLvsnprintf (buf, sizeof (buf), fmt, ap);
-	(*SLang_Dump_Routine) (buf);
-     }
-   else
-     {
-	vfprintf (stderr, fmt, ap);
-	fflush (stderr);
-     }
-   va_end (ap);
-}
-
-static void do_traceback (char *, unsigned int, char *);
-static int init_interpreter (void);
-
-/*{{{ push/pop/etc stack manipulation functions */
-
-/* This routine is assumed to work even in the presence of a SLang_Error. */
-_INLINE_
-int SLang_pop (SLang_Object_Type *x)
-{
-   register SLang_Object_Type *y;
-
-   y = _SLStack_Pointer;
-   if (y == _SLRun_Stack)
-     {
-	if (SLang_Error == 0) SLang_Error = SL_STACK_UNDERFLOW;
-	x->data_type = 0;
-	return -1;
-     }
-   y--;
-   *x = *y;
-
-   _SLStack_Pointer = y;
-   return 0;
-}
-
-static int pop_ctrl_integer (int *i)
-{
-   int type;
-   SLang_Class_Type *cl;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   register SLang_Object_Type *y;
-
-   /* Most of the time, either an integer or a char will be on the stack.
-    * Optimize these cases.
-    */
-   y = _SLStack_Pointer;
-   if (y == _SLRun_Stack)
-     {
-	if (SLang_Error == 0) SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-   y--;
-   
-   type = y->data_type;
-   if (type == SLANG_INT_TYPE)
-     {
-	_SLStack_Pointer = y;   
-	*i = y->v.int_val;
-	return 0;
-     }
-   if (type == SLANG_CHAR_TYPE)
-     {
-	_SLStack_Pointer = y;   
-	*i = y->v.char_val;
-	return 0;
-     }
-#else
-   if (-1 == (type = SLang_peek_at_stack ()))
-     return -1;
-#endif
-
-   cl = _SLclass_get_class ((unsigned char) type);
-   if (cl->cl_to_bool == NULL)
-     {
-	SLang_verror (SL_TYPE_MISMATCH,
-		      "%s cannot be used in a boolean context",
-		      cl->cl_name);
-	return -1;
-     }
-   return cl->cl_to_bool ((unsigned char) type, i);
-}
-
-_INLINE_
-int SLang_peek_at_stack (void)
-{
-   if (_SLStack_Pointer == _SLRun_Stack)
-     {
-	if (SLang_Error == 0)
-	  SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-
-   return (_SLStack_Pointer - 1)->data_type;
-}
-
-int SLang_peek_at_stack1 (void)
-{
-   int type;
-
-   type = SLang_peek_at_stack ();
-   if (type == SLANG_ARRAY_TYPE)
-     type = (_SLStack_Pointer - 1)->v.array_val->data_type;
-
-   return type;
-}
-
-_INLINE_
-void SLang_free_object (SLang_Object_Type *obj)
-{
-   unsigned char data_type;
-   SLang_Class_Type *cl;
-
-   if (obj == NULL) return;
-   data_type = obj->data_type;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [data_type])
-     return;
-   if (data_type == SLANG_STRING_TYPE)
-     {
-	SLang_free_slstring (obj->v.s_val);
-	return;
-     }
-#endif
-   cl = _SLclass_get_class (data_type);
-#if !_SLANG_OPTIMIZE_FOR_SPEED
-   if (cl->cl_class_type != SLANG_CLASS_TYPE_SCALAR)
-#endif
-     (*cl->cl_destroy) (data_type, (VOID_STAR) &obj->v);
-}
-
-_INLINE_
-int SLang_push (SLang_Object_Type *x)
-{
-   register SLang_Object_Type *y;
-   y = _SLStack_Pointer;
-
-   /* if there is a SLang_Error, probably not much harm will be done
-    if it is ignored here */
-   /* if (SLang_Error) return; */
-
-   /* flag it now */
-   if (y >= _SLStack_Pointer_Max)
-     {
-	if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
-	return -1;
-     }
-
-   *y = *x;
-   _SLStack_Pointer = y + 1;
-   return 0;
-}
-
-/* _INLINE_ */
-int SLclass_push_ptr_obj (unsigned char type, VOID_STAR pval)
-{
-   register SLang_Object_Type *y;
-   y = _SLStack_Pointer;
-
-   if (y >= _SLStack_Pointer_Max)
-     {
-	if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
-	return -1;
-     }
-
-   y->data_type = type;
-   y->v.ptr_val = pval;
-
-   _SLStack_Pointer = y + 1;
-   return 0;
-}
-
-_INLINE_
-int SLclass_push_int_obj (unsigned char type, int x)
-{
-   register SLang_Object_Type *y;
-   y = _SLStack_Pointer;
-
-   if (y >= _SLStack_Pointer_Max)
-     {
-	if (!SLang_Error) SLang_Error = SL_STACK_OVERFLOW;
-	return -1;
-     }
-
-   y->data_type = type;
-   y->v.int_val = x;
-
-   _SLStack_Pointer = y + 1;
-   return 0;
-}
-
-_INLINE_
-int _SLang_pop_object_of_type (unsigned char type, SLang_Object_Type *obj,
-			       int allow_arrays)
-{
-   register SLang_Object_Type *y;
-
-   y = _SLStack_Pointer;
-   if (y == _SLRun_Stack)
-     return SLang_pop (obj);
-   y--;
-   if (y->data_type != type)
-     {
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	/* This is an implicit typecast.  We do not want to typecast
-	 * floats to ints implicitly.  
-	 */
-	if (_SLarith_Is_Arith_Type [type]
-	    && _SLarith_Is_Arith_Type [y->data_type]
-	    && (_SLarith_Is_Arith_Type [type] >= _SLarith_Is_Arith_Type[y->data_type]))
-	  {
-	     /* This should not fail */
-	     (void) _SLarith_typecast (y->data_type, (VOID_STAR)&y->v, 1, 
-				       type, (VOID_STAR)&obj->v);
-	     obj->data_type = type;
-	     _SLStack_Pointer = y;
-	     return 0;
-	  }
-#endif
-	
-	if ((allow_arrays == 0)
-	    || (y->data_type != SLANG_ARRAY_TYPE)
-	    || (y->v.array_val->data_type != type))
-	  if (-1 == SLclass_typecast (type, 1, 0))
-	    return -1;
-     }
-   *obj = *y;
-   _SLStack_Pointer = y;
-   return 0;
-}
-
-/*  This function reverses the top n items on the stack and returns a
- *  an offset from the start of the stack to the last item.
- */
-int SLreverse_stack (int n)
-{
-   SLang_Object_Type *otop, *obot, tmp;
-
-   otop = _SLStack_Pointer;
-   if ((n > otop - _SLRun_Stack) || (n < 0))
-     {
-	SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-   obot = otop - n;
-   otop--;
-   while (otop > obot)
-     {
-	tmp = *obot;
-	*obot = *otop;
-	*otop = tmp;
-	otop--;
-	obot++;
-     }
-   return (int) ((_SLStack_Pointer - n) - _SLRun_Stack);
-}
-
-_INLINE_
-int SLroll_stack (int np)
-{
-   int n, i;
-   SLang_Object_Type *otop, *obot, tmp;
-
-   if ((n = abs(np)) <= 1) return 0;    /* identity */
-
-   obot = otop = _SLStack_Pointer;
-   i = n;
-   while (i != 0)
-     {
-	if (obot <= _SLRun_Stack)
-	  {
-	     SLang_Error = SL_STACK_UNDERFLOW;
-	     return -1;
-	  }
-	obot--;
-	i--;
-     }
-   otop--;
-
-   if (np > 0)
-     {
-	/* Put top on bottom and roll rest up. */
-	tmp = *otop;
-	while (otop > obot)
-	  {
-	     *otop = *(otop - 1);
-	     otop--;
-	  }
-	*otop = tmp;
-     }
-   else
-     {
-	/* Put bottom on top and roll rest down. */
-	tmp = *obot;
-	while (obot < otop)
-	  {
-	     *obot = *(obot + 1);
-	     obot++;
-	  }
-	*obot = tmp;
-     }
-   return 0;
-}
-
-int _SLstack_depth (void)
-{
-   return (int) (_SLStack_Pointer - _SLRun_Stack);
-}
-
-int SLdup_n (int n)
-{
-   SLang_Object_Type *bot, *top;
-
-   if (n <= 0)
-     return 0;
-   
-   top = _SLStack_Pointer;
-   if (top < _SLRun_Stack + n)
-     {
-	if (SLang_Error == 0)
-	  SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-   if (top + n > _SLStack_Pointer_Max)
-     {
-	if (SLang_Error == 0)
-	  SLang_Error = SL_STACK_OVERFLOW;
-	return -1;
-     }
-   bot = top - n;
-
-   while (bot < top)
-     {
-	SLang_Class_Type *cl;
-	unsigned char data_type = bot->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [data_type])
-	  {
-	     *_SLStack_Pointer++ = *bot++;
-	     continue;
-	  }
-#endif
-	cl = _SLclass_get_class (data_type);
-	if (-1 == (*cl->cl_push) (data_type, (VOID_STAR) &bot->v))
-	  return -1;
-	bot++;
-     }
-   return 0;
-}
-
-/*}}}*/
-
-/*{{{ inner interpreter and support functions */
-
-_INLINE_
-int _SL_increment_frame_pointer (void)
-{
-   if (Recursion_Depth >= SLANG_MAX_RECURSIVE_DEPTH)
-     {
-	SLang_verror (SL_STACK_OVERFLOW, "Num Args Stack Overflow");
-	return -1;
-     }
-   Num_Args_Stack [Recursion_Depth] = SLang_Num_Function_Args;
-
-   SLang_Num_Function_Args = Next_Function_Num_Args;
-   Next_Function_Num_Args = 0;
-   Recursion_Depth++;
-   return 0;
-}
-
-_INLINE_
-int _SL_decrement_frame_pointer (void)
-{
-   if (Recursion_Depth == 0)
-     {
-	SLang_verror (SL_STACK_UNDERFLOW, "Num Args Stack Underflow");
-	return -1;
-     }
-
-   Recursion_Depth--;
-   if (Recursion_Depth < SLANG_MAX_RECURSIVE_DEPTH)
-     SLang_Num_Function_Args = Num_Args_Stack [Recursion_Depth];
-
-   return 0;
-}
-
-_INLINE_
-int SLang_start_arg_list (void)
-{
-   if (Frame_Pointer_Depth < SLANG_MAX_RECURSIVE_DEPTH)
-     {
-	Frame_Pointer_Stack [Frame_Pointer_Depth] = (unsigned int) (Frame_Pointer - _SLRun_Stack);
-	Frame_Pointer = _SLStack_Pointer;
-	Frame_Pointer_Depth++;
-	Next_Function_Num_Args = 0;
-	return 0;
-     }
-
-   SLang_verror (SL_STACK_OVERFLOW, "Frame Stack Overflow");
-   return -1;
-}
-
-_INLINE_
-int SLang_end_arg_list (void)
-{
-   if (Frame_Pointer_Depth == 0)
-     {
-	SLang_verror (SL_STACK_UNDERFLOW, "Frame Stack Underflow");
-	return -1;
-     }
-   Frame_Pointer_Depth--;
-   if (Frame_Pointer_Depth < SLANG_MAX_RECURSIVE_DEPTH)
-     {
-	Next_Function_Num_Args = (int) (_SLStack_Pointer - Frame_Pointer);
-	Frame_Pointer = _SLRun_Stack + Frame_Pointer_Stack [Frame_Pointer_Depth];
-     }
-   return 0;
-}
-
-_INLINE_
-static int do_bc_call_direct_frame (int (*f)(void))
-{
-   if ((0 == SLang_end_arg_list ())
-       && (0 == _SL_increment_frame_pointer ()))
-     {
-	(void) (*f) ();
-	_SL_decrement_frame_pointer ();
-     }
-   if (SLang_Error)
-     return -1;
-   return 0;
-}
-
-static int do_name_type_error (SLang_Name_Type *nt)
-{
-   char buf[256];
-   if (nt != NULL)
-     {
-	(void) _SLsnprintf (buf, sizeof (buf), "(Error occurred processing %s)", nt->name);
-	do_traceback (buf, 0, NULL);
-     }
-   return -1;
-}
-
-/* local and global variable assignments */
-
-static int do_binary_ab (int op, SLang_Object_Type *obja, SLang_Object_Type *objb)
-{
-   SLang_Class_Type *a_cl, *b_cl, *c_cl;
-   unsigned char b_data_type, a_data_type, c_data_type;
-   int (*binary_fun) (int,
-		      unsigned char, VOID_STAR, unsigned int,
-		      unsigned char, VOID_STAR, unsigned int,
-		      VOID_STAR);
-   VOID_STAR pa;
-   VOID_STAR pb;
-   VOID_STAR pc;
-   int ret;
-
-   b_data_type = objb->data_type;
-   a_data_type = obja->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (_SLarith_Is_Arith_Type[a_data_type]
-       && _SLarith_Is_Arith_Type[b_data_type])
-     {
-	int status;
-	status = _SLarith_bin_op (obja, objb, op);
-	if (status != 1)
-	  return status;
-	/* drop and try it the hard way */
-     }
-#endif
-
-   a_cl = _SLclass_get_class (a_data_type);
-   if (a_data_type == b_data_type)
-     b_cl = a_cl;
-   else
-     b_cl = _SLclass_get_class (b_data_type);
-
-   if (NULL == (binary_fun = _SLclass_get_binary_fun (op, a_cl, b_cl, &c_cl, 1)))
-     return -1;
-
-   c_data_type = c_cl->cl_data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [a_data_type])
-     pa = (VOID_STAR) &obja->v;
-   else
-#endif
-     pa = _SLclass_get_ptr_to_value (a_cl, obja);
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [b_data_type])
-     pb = (VOID_STAR) &objb->v;
-   else
-#endif
-     pb = _SLclass_get_ptr_to_value (b_cl, objb);
-
-   pc = c_cl->cl_transfer_buf;
-
-   if (1 != (*binary_fun) (op,
-			   a_data_type, pa, 1,
-			   b_data_type, pb, 1,
-			   pc))
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Binary operation between %s and %s failed",
-		      a_cl->cl_name, b_cl->cl_name);
-
-	return -1;
-     }
-
-   /* apush will create a copy, so make sure we free after the push */
-   ret = (*c_cl->cl_apush)(c_data_type, pc);
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [c_data_type])
-#endif
-     (*c_cl->cl_adestroy)(c_data_type, pc);
-
-   return ret;
-}
-
-_INLINE_
-static void do_binary (int op)
-{
-   SLang_Object_Type obja, objb;
-
-   if (SLang_pop (&objb)) return;
-   if (0 == SLang_pop (&obja))
-     {
-	(void) do_binary_ab (op, &obja, &objb);
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obja.data_type])
-#endif
-	  SLang_free_object (&obja);
-     }
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [objb.data_type])
-#endif
-     SLang_free_object (&objb);
-}
-
-static int do_unary_op (int op, SLang_Object_Type *obj, int unary_type)
-{
-   int (*f) (int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-   VOID_STAR pa;
-   VOID_STAR pb;
-   SLang_Class_Type *a_cl, *b_cl;
-   unsigned char a_type, b_type;
-   int ret;
-
-   a_type = obj->data_type;
-   a_cl = _SLclass_get_class (a_type);
-
-   if (NULL == (f = _SLclass_get_unary_fun (op, a_cl, &b_cl, unary_type)))
-     return -1;
-
-   b_type = b_cl->cl_data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type [a_type])
-     pa = (VOID_STAR) &obj->v;
-   else
-#endif
-     pa = _SLclass_get_ptr_to_value (a_cl, obj);
-
-   pb = b_cl->cl_transfer_buf;
-
-   if (1 != (*f) (op, a_type, pa, 1, pb))
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Unary operation for %s failed", a_cl->cl_name);
-	return -1;
-     }
-
-   ret = (*b_cl->cl_apush)(b_type, pb);
-   /* cl_apush creates a copy, so make sure we call cl_adestroy */
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [b_type])
-#endif
-     (*b_cl->cl_adestroy)(b_type, pb);
-
-   return ret;
-}
-
-_INLINE_
-static int do_unary (int op, int unary_type)
-{
-   SLang_Object_Type obj;
-   int ret;
-
-   if (-1 == SLang_pop (&obj)) return -1;
-   ret = do_unary_op (op, &obj, unary_type);
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obj.data_type])
-#endif
-     SLang_free_object (&obj);
-   return ret;
-}
-
-static int do_assignment_binary (int op, SLang_Object_Type *obja_ptr)
-{
-   SLang_Object_Type objb;
-   int ret;
-
-   if (SLang_pop (&objb))
-     return -1;
-
-   ret = do_binary_ab (op, obja_ptr, &objb);
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [objb.data_type])
-#endif
-     SLang_free_object (&objb);
-   return ret;
-}
-
-/* The order of these is assumed to match the binary operators
- * defined in slang.h
- */
-static int
-map_assignment_op_to_binary (unsigned char op_type, int *op, int *is_unary)
-{
-   *is_unary = 0;
-   switch (op_type)
-     {
-      case _SLANG_BCST_PLUSEQS:
-      case _SLANG_BCST_MINUSEQS:
-      case _SLANG_BCST_TIMESEQS:
-      case _SLANG_BCST_DIVEQS:
-	*op = SLANG_PLUS + (op_type - _SLANG_BCST_PLUSEQS);
-	break;
-
-      case _SLANG_BCST_BOREQS:
-	*op = SLANG_BOR;
-	break;
-
-      case _SLANG_BCST_BANDEQS:
-	*op = SLANG_BAND;
-	break;
-
-      case _SLANG_BCST_POST_MINUSMINUS:
-      case _SLANG_BCST_MINUSMINUS:
-	*op = SLANG_MINUS;
-	*is_unary = 1;
-	break;
-
-      case _SLANG_BCST_PLUSPLUS:
-      case _SLANG_BCST_POST_PLUSPLUS:
-	*op = SLANG_PLUS;
-	*is_unary = 1;
-	break;
-
-      default:
-	SLang_verror (SL_NOT_IMPLEMENTED, "Assignment operator not implemented");
-	return -1;
-     }
-   return 0;
-}
-
-static int
-perform_lvalue_operation (unsigned char op_type, SLang_Object_Type *obja_ptr)
-{
-   switch (op_type)
-     {
-      case _SLANG_BCST_ASSIGN:
-	break;
-
-	/* The order of these is assumed to match the binary operators
-	 * defined in slang.h
-	 */
-      case _SLANG_BCST_PLUSEQS:
-      case _SLANG_BCST_MINUSEQS:
-      case _SLANG_BCST_TIMESEQS:
-      case _SLANG_BCST_DIVEQS:
-	if (-1 == do_assignment_binary (SLANG_PLUS + (op_type - _SLANG_BCST_PLUSEQS), obja_ptr))
-	  return -1;
-	break;
-
-      case _SLANG_BCST_BOREQS:
-	if (-1 == do_assignment_binary (SLANG_BOR, obja_ptr))
-	  return -1;
-	break;
-
-      case _SLANG_BCST_BANDEQS:
-	if (-1 == do_assignment_binary (SLANG_BAND, obja_ptr))
-	  return -1;
-	break;
-
-      case _SLANG_BCST_PLUSPLUS:
-      case _SLANG_BCST_POST_PLUSPLUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (obja_ptr->data_type == SLANG_INT_TYPE)
-	  return SLclass_push_int_obj (SLANG_INT_TYPE, obja_ptr->v.int_val + 1);
-#endif
-	if (-1 == do_unary_op (SLANG_PLUSPLUS, obja_ptr, _SLANG_BC_UNARY))
-	  return -1;
-	break;
-
-      case _SLANG_BCST_MINUSMINUS:
-      case _SLANG_BCST_POST_MINUSMINUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (obja_ptr->data_type == SLANG_INT_TYPE)
-	  return SLclass_push_int_obj (SLANG_INT_TYPE, obja_ptr->v.int_val - 1);
-#endif
-	if (-1 == do_unary_op (SLANG_MINUSMINUS, obja_ptr, _SLANG_BC_UNARY))
-	  return -1;
-	break;
-
-      default:
-	SLang_Error = SL_INTERNAL_ERROR;
-	return -1;
-     }
-   return 0;
-}
-
-_INLINE_
-static int
-set_lvalue_obj (unsigned char op_type, SLang_Object_Type *obja_ptr)
-{
-   if (op_type != _SLANG_BCST_ASSIGN)
-     {
-	if (-1 == perform_lvalue_operation (op_type, obja_ptr))
-	  return -1;
-     }
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [obja_ptr->data_type])
-#endif
-     SLang_free_object (obja_ptr);
-
-   return SLang_pop(obja_ptr);
-}
-
-static int
-set_struct_lvalue (SLBlock_Type *bc_blk)
-{
-   int type;
-   SLang_Class_Type *cl;
-   char *name;
-   int op;
-
-   if (-1 == (type = SLang_peek_at_stack ()))
-     return -1;
-
-   cl = _SLclass_get_class (type);
-   if ((cl->cl_sput == NULL)
-       || (cl->cl_sget == NULL))
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "%s does not support structure access",
-		      cl->cl_name);
-	SLdo_pop_n (2);		       /* object plus what was to be assigned */
-	return -1;
-     }
-   name = bc_blk->b.s_blk;
-   op = bc_blk->bc_sub_type;
-
-   if (op != _SLANG_BCST_ASSIGN)
-     {
-	/* We have something like (A.x += b) or (A.x++).  In either case,
-	 * we need A.x.
-	 */
-	SLang_Object_Type obj_A;
-	SLang_Object_Type obj;
-
-	if (-1 == SLang_pop (&obj_A))
-	  return -1;
-
-	if ((-1 == _SLpush_slang_obj (&obj_A))
-	    || (-1 == cl->cl_sget ((unsigned char) type, name))
-	    || (-1 == SLang_pop (&obj)))
-	  {
-	     SLang_free_object (&obj_A);
-	     return -1;
-	  }
-	/* Now the value of A.x is in obj. */
-	if (-1 == perform_lvalue_operation (op, &obj))
-	  {
-	     SLang_free_object (&obj);
-	     SLang_free_object (&obj_A);
-	     return -1;
-	  }
-	SLang_free_object (&obj);
-	/* The result of the operation is now on the stack.
-	 * Perform assignment */
-	if (-1 == SLang_push (&obj_A))
-	  {
-	     SLang_free_object (&obj_A);
-	     return -1;
-	  }
-     }
-
-   return (*cl->cl_sput) ((unsigned char) type, name);
-}
-
-static int make_unit_object (SLang_Object_Type *a, SLang_Object_Type *u)
-{
-   unsigned char type;
-   
-   type = a->data_type;
-   if (type == SLANG_ARRAY_TYPE)
-     type = a->v.array_val->data_type;
-   
-   u->data_type = type;
-   switch (type)
-     {
-      case SLANG_UCHAR_TYPE:
-      case SLANG_CHAR_TYPE:
-	u->v.char_val = 1;
-	break;
-
-      case SLANG_SHORT_TYPE:
-      case SLANG_USHORT_TYPE:
-	u->v.short_val = 1;
-	break;
-
-      case SLANG_LONG_TYPE:
-      case SLANG_ULONG_TYPE:
-	u->v.long_val = 1;
-	break;
-
-#if SLANG_HAS_FLOAT
-      case SLANG_FLOAT_TYPE:
-	u->v.float_val = 1;
-	break;
-	
-      case SLANG_COMPLEX_TYPE:
-	u->data_type = SLANG_DOUBLE_TYPE;
-      case SLANG_DOUBLE_TYPE:
-	u->v.double_val = 1;
-	break;
-#endif
-      default:
-	u->data_type = SLANG_INT_TYPE;
-	u->v.int_val = 1;
-     }
-   return 0;
-}
-
-
-/* We want to convert 'A[i] op X' to 'A[i] = A[i] op X'.  The code that
- * has been generated is:  X __args i A __aput-op
- * where __aput-op represents this function.  We need to generate:
- * __args i A __eargs __aget X op __args i A __eargs __aput
- * Here, __eargs implies a call to do_bc_call_direct_frame with either
- * the aput or aget function.  In addition, __args represents a call to 
- * SLang_start_arg_list.  Of course, i represents a set of indices.
- * 
- * Note: If op is an unary operation (e.g., ++ or --), then X will not
- * b present an will have to be taken to be 1.
- * 
- * Implementation note: For efficiency, calls to setup the frame, start
- * arg list will be omitted and SLang_Num_Function_Args will be set.
- * This is ugly but the alternative is much less efficient rendering these
- * assignment operators useless.  So, the plan is to roll the stack to get X,
- * then duplicate the next N values, call __aget followed by op X, finally
- * calling __aput.  Hence, the sequence is:
- * 
- *     start:   X i .. j A 
- *      dupN:   X i .. j A i .. j A
- *    __aget:   X i .. j A Y
- *      roll:   i .. j A Y X
- *        op:   i .. j A Z
- *      roll:   Z i .. j A
- *    __aput:
- */
-static int
-set_array_lvalue (int op)
-{
-   SLang_Object_Type x, y;
-   int num_args, is_unary;
-
-   if (-1 == map_assignment_op_to_binary (op, &op, &is_unary))
-     return -1;
-
-   /* Grab the indices and the array.  Do not start a new frame. */
-   if (-1 == SLang_end_arg_list ())
-     return -1;
-   num_args = Next_Function_Num_Args;
-   Next_Function_Num_Args = 0;
-
-   if (-1 == SLdup_n (num_args))
-     return -1;
-
-   SLang_Num_Function_Args = num_args;
-   if (-1 == _SLarray_aget ())
-     return -1;
-
-   if (-1 == SLang_pop (&y))
-     return -1;
-   
-   if (is_unary == 0)
-     {
-	if ((-1 == SLroll_stack (-(num_args + 1)))
-	    || (-1 == SLang_pop (&x)))
-	  {
-	     SLang_free_object (&y);
-	     return -1;
-	  }
-     }
-   else if (-1 == make_unit_object (&y, &x))
-     {
-	SLang_free_object (&y);
-	return -1;
-     }
-   
-   if (-1 == do_binary_ab (op, &y, &x))
-     {
-	SLang_free_object (&y);
-	SLang_free_object (&x);
-	return -1;
-     }
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [y.data_type])
-#endif
-     SLang_free_object (&y);
-   
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [x.data_type])
-#endif
-     SLang_free_object (&x);
-
-   if (-1 == SLroll_stack (num_args + 1))
-     return -1;
-
-   SLang_Num_Function_Args = num_args;
-   return _SLarray_aput ();
-}
-
-
-static int
-set_intrin_lvalue (SLBlock_Type *bc_blk)
-{
-   unsigned char op_type;
-   SLang_Object_Type obja;
-   SLang_Class_Type *cl;
-   SLang_Intrin_Var_Type *ivar;
-   VOID_STAR intrinsic_addr;
-   unsigned char intrinsic_type;
-
-   ivar = bc_blk->b.nt_ivar_blk;
-
-   intrinsic_type = ivar->type;
-   intrinsic_addr = ivar->addr;
-
-   op_type = bc_blk->bc_sub_type;
-
-   cl = _SLclass_get_class (intrinsic_type);
-
-   if (op_type != _SLANG_BCST_ASSIGN)
-     {
-	/* We want to get the current value into obja.  This is the
-	 * easiest way.
-	 */
-	if ((-1 == (*cl->cl_push) (intrinsic_type, intrinsic_addr))
-	    || (-1 == SLang_pop (&obja)))
-	  return -1;
-
-	(void) perform_lvalue_operation (op_type, &obja);
-	SLang_free_object (&obja);
-
-	if (SLang_Error)
-	  return -1;
-     }
-
-   return (*cl->cl_pop) (intrinsic_type, intrinsic_addr);
-}
-
-int _SLang_deref_assign (SLang_Ref_Type *ref)
-{
-   SLang_Object_Type *objp;
-   SLang_Name_Type *nt;
-   SLBlock_Type blk;
-
-   if (ref->is_global == 0)
-     {
-	objp = ref->v.local_obj;
-	if (objp > Local_Variable_Frame)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Local variable reference is out of scope");
-	     return -1;
-	  }
-	return set_lvalue_obj (_SLANG_BCST_ASSIGN, objp);
-     }
-
-   nt = ref->v.nt;
-   switch (nt->name_type)
-     {
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	if (-1 == set_lvalue_obj (_SLANG_BCST_ASSIGN,
-				  &((SLang_Global_Var_Type *)nt)->obj))
-	  {
-	     do_name_type_error (nt);
-	     return -1;
-	  }
-	break;
-
-      case SLANG_IVARIABLE:
-	blk.b.nt_blk = nt;
-	blk.bc_sub_type = _SLANG_BCST_ASSIGN;
-	if (-1 == set_intrin_lvalue (&blk))
-	  {
-	     do_name_type_error (nt);
-	     return -1;
-	  }
-	break;
-
-      case SLANG_LVARIABLE:
-	SLang_Error = SL_INTERNAL_ERROR;
-	/* set_intrin_lvalue (&blk); */
-	return -1;
-
-      case SLANG_RVARIABLE:
-      default:
-	SLang_verror (SL_READONLY_ERROR, "deref assignment to %s not allowed", nt->name);
-	return -1;
-     }
-
-   return 0;
-}
-
-static void set_deref_lvalue (SLBlock_Type *bc_blk)
-{
-   SLang_Object_Type *objp;
-   SLang_Ref_Type *ref;
-
-   switch (bc_blk->bc_sub_type)
-     {
-      case SLANG_LVARIABLE:
-	objp =  (Local_Variable_Frame - bc_blk->b.i_blk);
-	break;
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	objp = &bc_blk->b.nt_gvar_blk->obj;
-	break;
-      default:
-	SLang_Error = SL_INTERNAL_ERROR;
-	return;
-     }
-
-   if (-1 == _SLpush_slang_obj (objp))
-     return;
-
-   if (-1 == SLang_pop_ref (&ref))
-     return;
-   (void) _SLang_deref_assign (ref);
-   SLang_free_ref (ref);
-}
-
-static int push_struct_field (char *name)
-{
-   int type;
-   SLang_Class_Type *cl;
-
-   if (-1 == (type = SLang_peek_at_stack ()))
-     return -1;
-
-   cl = _SLclass_get_class ((unsigned char) type);
-   if (cl->cl_sget == NULL)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "%s does not permit structure access",
-		      cl->cl_name);
-	SLdo_pop_n (2);
-	return -1;
-     }
-
-   return (*cl->cl_sget) ((unsigned char) type, name);
-}
-
-static void trace_dump (char *format, char *name, SLang_Object_Type *objs, int n, int dir)
-{
-   unsigned int len;
-   char prefix [52];
-
-   len = Trace_Mode - 1;
-   if (len + 2 >= sizeof (prefix))
-     len = sizeof (prefix) - 2;
-
-   SLMEMSET (prefix, ' ', len);
-   prefix[len] = 0;
-
-   call_dump_routine (prefix);
-   call_dump_routine (format, name, n);
-
-   if (n > 0)
-     {
-	prefix[len] = ' ';
-	len++;
-	prefix[len] = 0;
-
-	_SLdump_objects (prefix, objs, n, dir);
-     }
-}
-
-/*  Pop a data item from the stack and return a pointer to it.
- *  Strings are not freed from stack so use another routine to do it.
- */
-static VOID_STAR pop_pointer (SLang_Object_Type *obj, unsigned char type)
-{
-#ifndef _SLANG_OPTIMIZE_FOR_SPEED
-   SLang_Class_Type *cl;
-#endif
-
-   SLang_Array_Type *at;
-
-   /* Arrays are special.  Allow scalars to automatically convert to arrays.
-    */
-   if (type == SLANG_ARRAY_TYPE)
-     {
-	if (-1 == SLang_pop_array (&at, 1))
-	  return NULL;
-	obj->data_type = SLANG_ARRAY_TYPE;
-	return obj->v.ptr_val = (VOID_STAR) at;
-     }
-
-   if (type == 0)
-     {
-	/* This happens when an intrinsic is declared without any information
-	 * regarding parameter types.
-	 */
-	if (-1 == SLang_pop (obj))
-	  return NULL;
-	type = obj->data_type;
-     }
-   else if (-1 == _SLang_pop_object_of_type (type, obj, 0))
-     return NULL;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   type = _SLclass_Class_Type [type];
-#else
-   type = _SLclass_get_class (type)->cl_class_type;
-#endif
-
-   if (type == SLANG_CLASS_TYPE_SCALAR)
-     return (VOID_STAR) &obj->v;
-   else if (type == SLANG_CLASS_TYPE_MMT)
-     return SLang_object_from_mmt (obj->v.ref);
-   else
-     return obj->v.ptr_val;
-}
-
-/* This is ugly.  Does anyone have a advice for a cleaner way of doing
- * this??
- */
-typedef void (*VF0_Type)(void);
-typedef void (*VF1_Type)(VOID_STAR);
-typedef void (*VF2_Type)(VOID_STAR, VOID_STAR);
-typedef void (*VF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef void (*VF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF0_Type)(void);
-typedef long (*LF1_Type)(VOID_STAR);
-typedef long (*LF2_Type)(VOID_STAR, VOID_STAR);
-typedef long (*LF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef long (*LF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-#if SLANG_HAS_FLOAT
-typedef double (*FF0_Type)(void);
-typedef double (*FF1_Type)(VOID_STAR);
-typedef double (*FF2_Type)(VOID_STAR, VOID_STAR);
-typedef double (*FF3_Type)(VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF4_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF5_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF6_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-typedef double (*FF7_Type)(VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR, VOID_STAR);
-#endif
-
-static int execute_intrinsic_fun (SLang_Intrin_Fun_Type *objf)
-{
-#if SLANG_HAS_FLOAT
-   double xf;
-#endif
-   VOID_STAR p[SLANG_MAX_INTRIN_ARGS];
-   SLang_Object_Type objs[SLANG_MAX_INTRIN_ARGS];
-   long ret;
-   unsigned char type;
-   unsigned int argc;
-   unsigned int i;
-   FVOID_STAR fptr;
-   unsigned char *arg_types;
-   int stk_depth;
-
-   fptr = objf->i_fun;
-   argc = objf->num_args;
-   type = objf->return_type;
-   arg_types = objf->arg_types;
-
-   if (argc > SLANG_MAX_INTRIN_ARGS)
-     {
-	SLang_verror(SL_APPLICATION_ERROR,
-		     "Intrinsic function %s requires too many parameters", objf->name);
-	return -1;
-     }
-
-   if (-1 == _SL_increment_frame_pointer ())
-     return -1;
-
-   stk_depth = -1;
-   if (Trace_Mode && (_SLang_Trace > 0))
-     {
-	int nargs;
-
-	stk_depth = _SLstack_depth ();
-
-	nargs = SLang_Num_Function_Args;
-	if (nargs == 0)
-	  nargs = (int)argc;
-
-	stk_depth -= nargs;
-
-	if (stk_depth >= 0)
-	  trace_dump (">>%s (%d args)\n",
-		      objf->name,
-		      _SLStack_Pointer - nargs,
-		      nargs,
-		      1);
-     }
-
-   i = argc;
-   while (i != 0)
-     {
-	i--;
-	if (NULL == (p[i] = pop_pointer (objs + i, arg_types[i])))
-	  {
-	     i++;
-	     goto free_and_return;
-	  }
-     }
-
-   ret = 0;
-#if SLANG_HAS_FLOAT
-   xf = 0.0;
-#endif
-
-   switch (argc)
-     {
-      case 0:
-	if (type == SLANG_VOID_TYPE) ((VF0_Type) fptr) ();
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF0_Type) fptr)();
-#endif
-	else ret = ((LF0_Type) fptr)();
-	break;
-
-      case 1:
-	if (type == SLANG_VOID_TYPE) ((VF1_Type) fptr)(p[0]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf =  ((FF1_Type) fptr)(p[0]);
-#endif
-	else ret =  ((LF1_Type) fptr)(p[0]);
-	break;
-
-      case 2:
-	if (type == SLANG_VOID_TYPE)  ((VF2_Type) fptr)(p[0], p[1]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF2_Type) fptr)(p[0], p[1]);
-#endif
-	else ret = ((LF2_Type) fptr)(p[0], p[1]);
-	break;
-
-      case 3:
-	if (type == SLANG_VOID_TYPE) ((VF3_Type) fptr)(p[0], p[1], p[2]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF3_Type) fptr)(p[0], p[1], p[2]);
-#endif
-	else ret = ((LF3_Type) fptr)(p[0], p[1], p[2]);
-	break;
-
-      case 4:
-	if (type == SLANG_VOID_TYPE) ((VF4_Type) fptr)(p[0], p[1], p[2], p[3]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF4_Type) fptr)(p[0], p[1], p[2], p[3]);
-#endif
-	else ret = ((LF4_Type) fptr)(p[0], p[1], p[2], p[3]);
-	break;
-
-      case 5:
-	if (type == SLANG_VOID_TYPE) ((VF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
-#endif
-	else ret = ((LF5_Type) fptr)(p[0], p[1], p[2], p[3], p[4]);
-	break;
-
-      case 6:
-	if (type == SLANG_VOID_TYPE) ((VF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
-#endif
-	else ret = ((LF6_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5]);
-	break;
-
-      case 7:
-	if (type == SLANG_VOID_TYPE) ((VF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
-#if SLANG_HAS_FLOAT
-	else if (type == SLANG_DOUBLE_TYPE) xf = ((FF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
-#endif
-	else ret = ((LF7_Type) fptr)(p[0], p[1], p[2], p[3], p[4], p[5], p[6]);
-	break;
-     }
-
-   switch (type)
-     {
-      case SLANG_VOID_TYPE:
-	break;
-	
-#if SLANG_HAS_FLOAT
-      case SLANG_DOUBLE_TYPE:
-	(void) SLang_push_double (xf);
-	break;
-#endif
-      case SLANG_UINT_TYPE:
-      case SLANG_INT_TYPE: (void) SLclass_push_int_obj (type, (int) ret);
-	break;
-	
-      case SLANG_CHAR_TYPE:
-      case SLANG_UCHAR_TYPE: (void) SLclass_push_char_obj (type, (char) ret);
-	break;
-
-      case SLANG_SHORT_TYPE:
-      case SLANG_USHORT_TYPE: (void) SLclass_push_short_obj (type, (short) ret);
-	break;
-
-      case SLANG_LONG_TYPE:
-      case SLANG_ULONG_TYPE: (void) SLclass_push_long_obj (type, ret);
-	break;
-	
-      case SLANG_STRING_TYPE:
-	if (NULL == (char *)ret)
-	  {
-	     if (SLang_Error == 0) SLang_Error = SL_INTRINSIC_ERROR;
-	  }
-	else (void) SLang_push_string ((char *)ret);
-	break;
-	
-      default:
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Support for intrinsic functions returning %s is not provided",
-		      SLclass_get_datatype_name (type));
-     }
-
-   if (stk_depth >= 0)
-     {
-	stk_depth = _SLstack_depth () - stk_depth;
-
-	trace_dump ("<<%s (returning %d values)\n",
-		      objf->name,
-		      _SLStack_Pointer - stk_depth,
-		      stk_depth,
-		      1);
-     }
-
-   free_and_return:
-   while (i < argc)
-     {
-	SLang_free_object (objs + i);
-	i++;
-     }
-
-   return _SL_decrement_frame_pointer ();
-}
-
-static int inner_interp(register SLBlock_Type *);
-
-/* Switch_Obj_Ptr points to the NEXT available free switch object */
-static SLang_Object_Type Switch_Objects[SLANG_MAX_NESTED_SWITCH];
-static SLang_Object_Type *Switch_Obj_Ptr = Switch_Objects;
-static SLang_Object_Type *Switch_Obj_Max = Switch_Objects + SLANG_MAX_NESTED_SWITCH;
-
-static void
-lang_do_loops (unsigned char stype, SLBlock_Type *block, unsigned int num_blocks)
-{
-   int i, ctrl;
-   int first, last;
-   SLBlock_Type *blks[4];
-   char *loop_name;
-   SLang_Foreach_Context_Type *foreach_context;
-   SLang_Class_Type *cl;
-   int type;
-   unsigned int j;
-
-   j = 0;
-   for (i = 0; i < (int) num_blocks; i++)
-     {
-	if (block[i].bc_main_type != _SLANG_BC_BLOCK)
-	  {
-	     if (block[i].bc_main_type == _SLANG_BC_LINE_NUM)
-	       continue;
-
-	     SLang_verror (SL_SYNTAX_ERROR, "Bytecode is not a looping block");
-	     return;
-	  }
-	blks[j] = block[i].b.blk;
-	j++;
-     }
-
-   num_blocks = j;
-   block = blks[0];
-
-   switch (stype)
-     {
-      case _SLANG_BCST_FOREACH:
-	loop_name = "foreach";
-	if (num_blocks != 1)
-	  goto wrong_num_blocks_error;
-
-	/* We should find Next_Function_Num_Args + 1 items on the stack.
-	 * The first Next_Function_Num_Args items represent the arguments to
-	 * to USING.  The last item (deepest in stack) is the object to loop
-	 * over.  So, roll the stack up and grab it.
-	 */
-	if ((-1 == SLroll_stack (-(Next_Function_Num_Args + 1)))
-	    || (-1 == (type = SLang_peek_at_stack ())))
-	  goto return_error;
-
-	cl = _SLclass_get_class ((unsigned char) type);
-	if ((cl->cl_foreach == NULL)
-	    || (cl->cl_foreach_open == NULL)
-	    || (cl->cl_foreach_close == NULL))
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, "%s does not permit foreach", cl->cl_name);
-	     SLdo_pop_n (Next_Function_Num_Args + 1);
-	     goto return_error;
-	  }
-
-	if (NULL == (foreach_context = (*cl->cl_foreach_open) ((unsigned char)type, Next_Function_Num_Args)))
-	  goto return_error;
-
-	while (1)
-	  {
-	     int status;
-
-	     if (SLang_Error)
-	       {
-		  (*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
-		  goto return_error;
-	       }
-
-	     status = (*cl->cl_foreach) ((unsigned char) type, foreach_context);
-	     if (status <= 0)
-	       {
-		  if (status == 0)
-		    break;
-
-		  (*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
-		  goto return_error;
-	       }
-
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	  }
-	(*cl->cl_foreach_close) ((unsigned char) type, foreach_context);
-	break;
-
-      case _SLANG_BCST_WHILE:
-	loop_name = "while";
-
-	if (num_blocks != 2)
-	  goto wrong_num_blocks_error;
-
-	type = blks[1]->bc_main_type;
-	while (1)
-	  {
-	     if (SLang_Error)
-	       goto return_error;
-
-	     inner_interp (block);
-	     if (Lang_Break) break;
-
-	     if (-1 == pop_ctrl_integer (&ctrl))
-	       goto return_error;
-
-	     if (ctrl == 0) break;
-
-	     if (type)
-	       {
-		  inner_interp (blks[1]);
-		  if (Lang_Break) break;
-		  Lang_Break_Condition = /* Lang_Continue = */ 0;
-	       }
-	  }
-	break;
-
-      case _SLANG_BCST_DOWHILE:
-	loop_name = "do...while";
-
-	if (num_blocks != 2)
-	  goto wrong_num_blocks_error;
-
-	while (1)
-	  {
-	     if (SLang_Error)
-	       goto return_error;
-
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	     inner_interp (blks[1]);
-	     if (-1 == pop_ctrl_integer (&ctrl))
-	       goto return_error;
-
-	     if (ctrl == 0) break;
-	  }
-	break;
-
-      case _SLANG_BCST_CFOR:
-	loop_name = "for";
-
-	/* we need 4 blocks: first 3 control, the last is code */
-	if (num_blocks != 4) goto wrong_num_blocks_error;
-
-	inner_interp (block);
-	while (1)
-	  {
-	     if (SLang_Error)
-	       goto return_error;
-
-	     inner_interp(blks[1]);       /* test */
-	     if (-1 == pop_ctrl_integer (&ctrl))
-	       goto return_error;
-
-	     if (ctrl == 0) break;
-	     inner_interp(blks[3]);       /* code */
-	     if (Lang_Break) break;
-	     inner_interp(blks[2]);       /* bump */
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	  }
-	break;
-
-      case _SLANG_BCST_FOR:
-	loop_name = "_for";
-
-	if (num_blocks != 1)
-	  goto wrong_num_blocks_error;
-
-	/* 3 elements: first, last, step */
-	if ((-1 == SLang_pop_integer (&ctrl))
-	    || (-1 == SLang_pop_integer (&last))
-	    || (-1 == SLang_pop_integer (&first)))
-	  goto return_error;
-
-	i = first;
-	while (1)
-	  {
-	     /* It is ugly to have this test here but I do not know of a
-	      * simple way to do this without using two while loops.
-	      */
-	     if (ctrl >= 0)
-	       {
-		  if (i > last) break;
-	       }
-	     else if (i < last) break;
-
-	     if (SLang_Error) goto return_error;
-
-	     SLclass_push_int_obj (SLANG_INT_TYPE, i);
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-
-	     i += ctrl;
-	  }
-	break;
-
-      case _SLANG_BCST_LOOP:
-	loop_name = "loop";
-	if (num_blocks != 1)
-	  goto wrong_num_blocks_error;
-
-	if (-1 == SLang_pop_integer (&ctrl))
-	  goto return_error;
-	while (ctrl > 0)
-	  {
-	     ctrl--;
-
-	     if (SLang_Error)
-	       goto return_error;
-
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	  }
-	break;
-
-      case _SLANG_BCST_FOREVER:
-	loop_name = "forever";
-
-	if (num_blocks != 1)
-	  goto wrong_num_blocks_error;
-
-	while (1)
-	  {
-	     if (SLang_Error)
-	       goto return_error;
-
-	     inner_interp (block);
-	     if (Lang_Break) break;
-	     Lang_Break_Condition = /* Lang_Continue = */ 0;
-	  }
-	break;
-
-      default:  SLang_verror(SL_INTERNAL_ERROR, "Unknown loop type");
-	return;
-     }
-   Lang_Break = /* Lang_Continue = */ 0;
-   Lang_Break_Condition = Lang_Return;
-   return;
-
-   wrong_num_blocks_error:
-   SLang_verror (SL_SYNTAX_ERROR, "Wrong number of blocks for '%s' construct", loop_name);
-
-   /* drop */
-   return_error:
-   do_traceback (loop_name, 0, NULL);
-}
-
-static void lang_do_and_orelse (unsigned char stype, SLBlock_Type *addr, SLBlock_Type *addr_max)
-{
-   int test = 0;
-   int is_or;
-
-   is_or = (stype == _SLANG_BCST_ORELSE);
-
-   while (addr <= addr_max)
-     {
-	if (addr->bc_main_type == _SLANG_BC_LINE_NUM)
-	  {
-	     addr++;
-	     continue;
-	  }
-
-	inner_interp (addr->b.blk);
-	if (SLang_Error
-	    || Lang_Break_Condition
-	    || (-1 == pop_ctrl_integer (&test)))
-	  return;
-
-	if (is_or == (test != 0))
-	  break;
-
-	/* if (((stype == _SLANG_BCST_ANDELSE) && (test == 0))
-	 *   || ((stype == _SLANG_BCST_ORELSE) && test))
-	 * break;
-	 */
-
-	addr++;
-     }
-   SLclass_push_int_obj (SLANG_INT_TYPE, test);
-}
-
-static void do_else_if (SLBlock_Type *zero_block, SLBlock_Type *non_zero_block)
-{
-   int test;
-
-   if (-1 == pop_ctrl_integer (&test))
-     return;
-
-   if (test == 0)
-     non_zero_block = zero_block;
-
-   if (non_zero_block != NULL)
-     inner_interp (non_zero_block->b.blk);
-}
-
-int _SLang_trace_fun (char *f)
-{
-   if (NULL == (f = SLang_create_slstring (f)))
-     return -1;
-
-   SLang_free_slstring (Trace_Function);
-   Trace_Function = f;
-   _SLang_Trace = 1;
-   return 0;
-}
-
-int _SLdump_objects (char *prefix, SLang_Object_Type *x, unsigned int n, int dir)
-{
-   char *s;
-   SLang_Class_Type *cl;
-
-   while (n)
-     {
-	cl = _SLclass_get_class (x->data_type);
-
-	if (NULL == (s = _SLstringize_object (x)))
-	  s = "??";
-
-	call_dump_routine ("%s[%s]:%s\n", prefix, cl->cl_name, s);
-
-	SLang_free_slstring (s);
-
-	x += dir;
-	n--;
-     }
-   return 0;
-}
-
-static SLBlock_Type *Exit_Block_Ptr;
-static SLBlock_Type *Global_User_Block[5];
-static SLBlock_Type **User_Block_Ptr = Global_User_Block;
-char *_SLang_Current_Function_Name = NULL;
-
-static int execute_slang_fun (_SLang_Function_Type *fun)
-{
-   register unsigned int i;
-   register SLang_Object_Type *frame, *lvf;
-   register unsigned int n_locals;
-   _SLBlock_Header_Type *header;
-   /* SLBlock_Type *val; */
-   SLBlock_Type *exit_block_save;
-   SLBlock_Type **user_block_save;
-   SLBlock_Type *user_blocks[5];
-   char *save_fname;
-
-   exit_block_save = Exit_Block_Ptr;
-   user_block_save = User_Block_Ptr;
-   User_Block_Ptr = user_blocks;
-   *(user_blocks) = NULL;
-   *(user_blocks + 1) = NULL;
-   *(user_blocks + 2) = NULL;
-   *(user_blocks + 3) = NULL;
-   *(user_blocks + 4) = NULL;
-
-   Exit_Block_Ptr = NULL;
-
-   save_fname = _SLang_Current_Function_Name;
-   _SLang_Current_Function_Name = fun->name;
-
-   _SL_increment_frame_pointer ();
-
-   /* need loaded?  */
-   if (fun->nlocals == AUTOLOAD_NUM_LOCALS)
-     {
-	header = NULL;
-	if (-1 == SLang_load_file(fun->v.autoload_filename))
-	  goto the_return;
-
-	if (fun->nlocals == AUTOLOAD_NUM_LOCALS)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "%s: Function did not autoload",
-			   _SLang_Current_Function_Name);
-             goto the_return;
-	  }
-     }
-
-   n_locals = fun->nlocals;
-
-   /* let the error propagate through since it will do no harm
-    and allow us to restore stack. */
-
-   /* set new stack frame */
-   lvf = frame = Local_Variable_Frame;
-   i = n_locals;
-   if ((lvf + i) > Local_Variable_Stack + SLANG_MAX_LOCAL_STACK)
-     {
-	SLang_verror(SL_STACK_OVERFLOW, "%s: Local Variable Stack Overflow",
-		     _SLang_Current_Function_Name);
-	goto the_return;
-     }
-
-   /* Make sure we do not allow this header to get destroyed by something
-    * like:  define crash () { eval ("define crash ();") }
-    */
-   header = fun->v.header;
-   header->num_refs++;
-
-   while (i--)
-     {
-	lvf++;
-	lvf->data_type = SLANG_UNDEFINED_TYPE;
-     }
-   Local_Variable_Frame = lvf;
-
-   /* read values of function arguments */
-   i = fun->nargs;
-   while (i > 0)
-     {
-	i--;
-	(void) SLang_pop (Local_Variable_Frame - i);
-     }
-
-   if (SLang_Enter_Function != NULL) (*SLang_Enter_Function)(_SLang_Current_Function_Name);
-
-   if (_SLang_Trace)
-     {
-	int stack_depth;
-
-	stack_depth = _SLstack_depth ();
-
-	if ((Trace_Function != NULL)
-	    && (0 == strcmp (Trace_Function, _SLang_Current_Function_Name))
-	    && (Trace_Mode == 0))
-	  Trace_Mode = 1;
-
-	if (Trace_Mode)
-	  {
-	     /* The local variable frame grows backwards */
-	     trace_dump (">>%s (%d args)\n",
-			 _SLang_Current_Function_Name,
-			 Local_Variable_Frame,
-			 (int) fun->nargs,
-			 -1);
-	     Trace_Mode++;
-	  }
-
-	inner_interp (header->body);
-	Lang_Break_Condition = Lang_Return = Lang_Break = 0;
-	if (Exit_Block_Ptr != NULL) inner_interp(Exit_Block_Ptr);
-
-	if (Trace_Mode)
-	  {
-	     Trace_Mode--;
-	     stack_depth = _SLstack_depth () - stack_depth;
-
-	     trace_dump ("<<%s (returning %d values)\n",
-			 _SLang_Current_Function_Name,
-			 _SLStack_Pointer - stack_depth,
-			 stack_depth,
-			 1);
-
-	     if (Trace_Mode == 1)
-	       Trace_Mode = 0;
-	  }
-     }
-   else
-     {
-	inner_interp (header->body);
-	Lang_Break_Condition = Lang_Return = Lang_Break = 0;
-	if (Exit_Block_Ptr != NULL) inner_interp(Exit_Block_Ptr);
-     }
-
-   if (SLang_Exit_Function != NULL) (*SLang_Exit_Function)(_SLang_Current_Function_Name);
-
-   if (SLang_Error)
-     do_traceback(fun->name, n_locals,
-#if _SLANG_HAS_DEBUG_CODE
-		  fun->file
-#else
-		  NULL
-#endif
-		  );
-
-   /* free local variables.... */
-   lvf = Local_Variable_Frame;
-   while (lvf > frame)
-     {
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (SLANG_CLASS_TYPE_SCALAR != _SLclass_Class_Type [lvf->data_type])
-#endif
-	  SLang_free_object (lvf);
-	lvf--;
-     }
-   Local_Variable_Frame = lvf;
-
-   if (header->num_refs == 1)
-     free_function_header (header);
-   else
-     header->num_refs--;
-
-   the_return:
-
-   Lang_Break_Condition = Lang_Return = Lang_Break = 0;
-   Exit_Block_Ptr = exit_block_save;
-   User_Block_Ptr = user_block_save;
-   _SLang_Current_Function_Name = save_fname;
-   _SL_decrement_frame_pointer ();
-
-   if (SLang_Error)
-     return -1;
-
-   return 0;
-}
-
-static void do_traceback (char *name, unsigned int locals, char *file)
-{
-   char *s;
-   unsigned int i;
-   SLang_Object_Type *objp;
-   unsigned short stype;
-
-   /* FIXME: Priority=low
-    * I need to make this configurable!!! That is, let the
-    * application decide whether or not a usage error should result in a
-    * traceback.
-    */
-   if (SLang_Error == SL_USAGE_ERROR)
-     return;
-
-   if (SLang_Traceback == 0)
-     return;
-
-   call_dump_routine ("S-Lang Traceback: %s\n", name);
-   if (SLang_Traceback < 0)
-     return;
-
-   if (file != NULL)
-     call_dump_routine ("File: %s\n", file);
-
-   if (locals == 0)
-     return;
-
-   call_dump_routine ("  Local Variables:\n");
-
-   for (i = 0; i < locals; i++)
-     {
-	SLang_Class_Type *cl;
-	char *class_name;
-
-	objp = Local_Variable_Frame - i;
-	stype = objp->data_type;
-
-	s = _SLstringize_object (objp);
-	cl = _SLclass_get_class (stype);
-	class_name = cl->cl_name;
-
-	call_dump_routine ("\t$%d: Type: %s,\tValue:\t", i, class_name);
-
-	if (s == NULL) call_dump_routine("??\n");
-	else
-	  {
-	     char *q = "";
-#ifndef HAVE_VSNPRINTF
-	     char buf[256];
-	     if (strlen (s) >= sizeof (buf))
-	       {
-		  strncpy (buf, s, sizeof(buf));
-		  s = buf;
-		  s[sizeof(buf) - 1] = 0;
-	       }
-#endif
-	     if (SLANG_STRING_TYPE == stype) q = "\"";
-	     call_dump_routine ("%s%s%s\n", q, s, q);
-	  }
-     }
-}
-
-static void do_app_unary (SLang_App_Unary_Type *nt)
-{
-   if (-1 == do_unary (nt->unary_op, nt->name_type))
-     do_traceback (nt->name, 0, NULL);
-}
-
-static int inner_interp_nametype (SLang_Name_Type *nt)
-{
-   SLBlock_Type bc_blks[2];
-
-   bc_blks[0].b.nt_blk = nt;
-   bc_blks[0].bc_main_type = nt->name_type;
-   bc_blks[1].bc_main_type = 0;
-   return inner_interp(bc_blks);
-}
-
-int _SLang_dereference_ref (SLang_Ref_Type *ref)
-{
-   if (ref == NULL)
-     {
-	SLang_Error = SL_INTERNAL_ERROR;
-	return -1;
-     }
-
-   if (ref->is_global == 0)
-     {
-	SLang_Object_Type *obj = ref->v.local_obj;
-	if (obj > Local_Variable_Frame)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
-	     return -1;
-	  }
-	return _SLpush_slang_obj (ref->v.local_obj);
-     }
-
-   (void) inner_interp_nametype (ref->v.nt);
-   return 0;
-}
-
-int _SLang_is_ref_initialized (SLang_Ref_Type *ref)
-{
-   unsigned char type;
-
-   if (ref == NULL)
-     {
-	SLang_Error = SL_INTERNAL_ERROR;
-	return -1;
-     }
-
-   if (ref->is_global == 0)
-     {
-	SLang_Object_Type *obj = ref->v.local_obj;
-	if (obj > Local_Variable_Frame)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
-	     return -1;
-	  }
-	type = ref->v.local_obj->data_type;
-     }
-   else
-     {
-	SLang_Name_Type *nt = ref->v.nt;
-	if ((nt->name_type != SLANG_GVARIABLE)
-	    && (nt->name_type != SLANG_PVARIABLE))
-	  return 1;
-	type = ((SLang_Global_Var_Type *)nt)->obj.data_type;
-     }
-   return type != SLANG_UNDEFINED_TYPE;
-}
-
-int _SLang_uninitialize_ref (SLang_Ref_Type *ref)
-{
-   SLang_Object_Type *obj;
-
-   if (ref == NULL)
-     {
-	SLang_Error = SL_INTERNAL_ERROR;
-	return -1;
-     }
-
-   if (ref->is_global == 0)
-     {
-	obj = ref->v.local_obj;
-	if (obj > Local_Variable_Frame)
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Local variable deref is out of scope");
-	     return -1;
-	  }
-	obj = ref->v.local_obj;
-     }
-   else
-     {
-	SLang_Name_Type *nt = ref->v.nt;
-	if ((nt->name_type != SLANG_GVARIABLE)
-	    && (nt->name_type != SLANG_PVARIABLE))
-	  return -1;
-	obj = &((SLang_Global_Var_Type *)nt)->obj;
-     }
-   SLang_free_object (obj);
-   obj->data_type = SLANG_UNDEFINED_TYPE;
-   obj->v.ptr_val = NULL;
-   return 0;
-}
-
-void (*SLang_Interrupt)(void);
-static int Last_Error;
-void (*SLang_User_Clear_Error)(void);
-void _SLang_clear_error (void)
-{
-   if (Last_Error <= 0)
-     {
-	Last_Error = 0;
-	return;
-     }
-   Last_Error--;
-   if (SLang_User_Clear_Error != NULL) (*SLang_User_Clear_Error)();
-}
-
-int _SLpush_slang_obj (SLang_Object_Type *obj)
-{
-   unsigned char subtype;
-   SLang_Class_Type *cl;
-
-   if (obj == NULL) return SLang_push_null ();
-
-   subtype = obj->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[subtype])
-     return SLang_push (obj);
-#endif
-
-   cl = _SLclass_get_class (subtype);
-   return (*cl->cl_push) (subtype, (VOID_STAR) &obj->v);
-}
-
-_INLINE_
-static int push_local_variable (int i)
-{
-   SLang_Class_Type *cl;
-   SLang_Object_Type *obj;
-   unsigned char subtype;
-
-   obj = Local_Variable_Frame - i;
-   subtype = obj->data_type;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[subtype])
-     return SLang_push (obj);
-   if (subtype == SLANG_STRING_TYPE)
-     return _SLang_dup_and_push_slstring (obj->v.s_val);
-#endif
-
-   cl = _SLclass_get_class (subtype);
-   return (*cl->cl_push) (subtype, (VOID_STAR) &obj->v);
-}
-
-static int push_intrinsic_variable (SLang_Intrin_Var_Type *ivar)
-{
-   SLang_Class_Type *cl;
-   unsigned char stype;
-
-   stype = ivar->type;
-   cl = _SLclass_get_class (stype);
-
-   if (-1 == (*cl->cl_push_intrinsic) (stype, ivar->addr))
-     {
-	do_name_type_error ((SLang_Name_Type *) ivar);
-	return -1;
-     }
-   return 0;
-}
-
-static int dereference_object (void)
-{
-   SLang_Object_Type obj;
-   SLang_Class_Type *cl;
-   unsigned char type;
-   int ret;
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   type = obj.data_type;
-
-   cl = _SLclass_get_class (type);
-   ret = (*cl->cl_dereference)(type, (VOID_STAR) &obj.v);
-
-   SLang_free_object (&obj);
-   return ret;
-}
-
-static int case_function (void)
-{
-   unsigned char type;
-   SLang_Object_Type obj;
-   SLang_Object_Type *swobjptr;
-
-   swobjptr = Switch_Obj_Ptr - 1;
-
-   if ((swobjptr < Switch_Objects)
-       || (0 == (type = swobjptr->data_type)))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Misplaced 'case' keyword");
-	return -1;
-     }
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   if (obj.data_type != type)
-     {
-	SLang_Class_Type *a_cl, *b_cl;
-
-	a_cl = _SLclass_get_class (obj.data_type);
-	b_cl = _SLclass_get_class (type);
-
-	if (NULL == _SLclass_get_binary_fun (SLANG_EQ, a_cl, b_cl, &a_cl, 0))
-	  {
-	     (void) SLclass_push_int_obj (SLANG_INT_TYPE, 0);
-	     SLang_free_object (&obj);
-	     return 0;
-	  }
-     }
-
-   (void) do_binary_ab (SLANG_EQ, swobjptr, &obj);
-   SLang_free_object (&obj);
-   return 0;
-}
-
-static void tmp_variable_function (SLBlock_Type *addr)
-{
-   SLang_Object_Type *obj;
-
-   switch (addr->bc_sub_type)
-     {
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	obj = &addr->b.nt_gvar_blk->obj;
-	break;
-
-      case SLANG_LVARIABLE:
-	obj = Local_Variable_Frame - addr->b.i_blk;
-	break;
-
-      default:
-	SLang_Error = SL_INTERNAL_ERROR;
-	return;
-     }
-
-   /* There is no need to go through higher level routines since we are
-    * not creating or destroying extra copies.
-    */
-   if (-1 == SLang_push (obj))
-     return;
-
-   obj->data_type = SLANG_UNDEFINED_TYPE;
-   obj->v.ptr_val = NULL;
-}
-
-
-static int
-do_inner_interp_error (SLBlock_Type *err_block,
-		       SLBlock_Type *addr_start,
-		       SLBlock_Type *addr)
-{
-   int save_err, slerr;
-
-   /* Someday I can use the these variable to provide extra information
-    * about what went wrong.
-    */
-   (void) addr_start;
-   (void) addr;
-
-   if (err_block == NULL)
-     goto return_error;
-
-   if (SLang_Error < 0)		       /* errors less than 0 are severe */
-     goto return_error;
-
-   save_err = Last_Error++;
-   slerr = SLang_Error;
-   SLang_Error = 0;
-   inner_interp (err_block->b.blk);
-
-   if (Last_Error <= save_err)
-     {
-	/* Caught error and cleared it */
-	Last_Error = save_err;
-	if ((Lang_Break_Condition == 0)
-	    /* An error may have cleared the error and then caused the
-	     * function to return.  We will allow that but let's not allow
-	     * 'break' nor 'continue' statements until later.
-	     */
-	    || Lang_Return)
-	  return 0;
-
-	/* drop--- either a break or continue was called */
-     }
-
-   Last_Error = save_err;
-   SLang_Error = slerr;
-
-   return_error:
-#if _SLANG_HAS_DEBUG_CODE
-   while (addr >= addr_start)
-     {
-	if (addr->bc_main_type == _SLANG_BC_LINE_NUM)
-	  {
-	     char buf[256];
-	     sprintf (buf, "(Error occurred on line %lu)", addr->b.l_blk);
-	     do_traceback (buf, 0, NULL);
-	     break;
-	  }
-	/* Special hack for 16 bit systems to prevent pointer wrapping. */
-#if defined(__16_BIT_SYSTEM__)
-	if (addr == addr_start)
-	  break;
-#endif
-	addr--;
-     }
-#endif
-   return -1;
-}
-
-
-#define GATHER_STATISTICS 0
-#if GATHER_STATISTICS
-static unsigned int Bytecodes[0xFFFF];
-
-static void print_stats (void)
-{
-   unsigned int i;
-   unsigned long total;
-   FILE *fp = fopen ("stats.txt", "w");
-   if (fp == NULL)
-     return;
-   
-   total = 0;
-   for (i = 0; i < 0xFFFF; i++)
-     total += Bytecodes[i];
-   
-   if (total == 0)
-     total = 1;
-
-   for (i = 0; i < 0xFFFF; i++)
-     {
-	if (Bytecodes[i])
-	  fprintf (fp, "0x%04X %9u %e\n", i, Bytecodes[i], Bytecodes[i]/(double) total);
-     }
-   fclose (fp);
-}
-
-static void add_to_statistics (SLBlock_Type *b)
-{
-   unsigned short x, y;
-   
-   x = b->bc_main_type;
-   if (x == 0)
-     {
-	Bytecodes[0] += 1;
-	return;
-     }
-   b++;
-   y = b->bc_main_type;
-
-   Bytecodes[(x << 8) | y] += 1;
-}
-
-#endif
-
-/* inner interpreter */
-/* The return value from this function is only meaningful when it is used
- * to process blocks for the switch statement.  If it returns 0, the calling
- * routine should pass the next block to it.  Otherwise it will
- * return non-zero, with or without error.
- */
-static int inner_interp (SLBlock_Type *addr_start)
-{
-   SLBlock_Type *block, *err_block, *addr;
-#if GATHER_STATISTICS
-   static int inited = 0;
-
-   if (inited == 0)
-     {
-	(void) SLang_add_cleanup_function (print_stats);
-	inited = 1;
-     }
-#endif
-
-   /* for systems that have no real interrupt facility (e.g. go32 on dos) */
-   if (SLang_Interrupt != NULL) (*SLang_Interrupt)();
-
-   block = err_block = NULL;
-   addr = addr_start;
-
-#if GATHER_STATISTICS
-   add_to_statistics (addr);
-#endif
-   while (1)
-     {
-	switch (addr->bc_main_type)
-	  {
-	   case 0:
-	     return 1;
-	   case _SLANG_BC_LVARIABLE:
-	     push_local_variable (addr->b.i_blk);
-	     break;
-	   case _SLANG_BC_GVARIABLE:
-	     if (-1 == _SLpush_slang_obj (&addr->b.nt_gvar_blk->obj))
-	       do_name_type_error (addr->b.nt_blk);
-	     break;
-
-	   case _SLANG_BC_IVARIABLE:
-	   case _SLANG_BC_RVARIABLE:
-	     push_intrinsic_variable (addr->b.nt_ivar_blk);
-	     break;
-
-	   case _SLANG_BC_INTRINSIC:
-	     execute_intrinsic_fun (addr->b.nt_ifun_blk);
-	     if (SLang_Error)
-	       do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
-	     break;
-
-	   case _SLANG_BC_FUNCTION:
-	     execute_slang_fun (addr->b.nt_fun_blk);
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_MATH_UNARY:
-	   case _SLANG_BC_APP_UNARY:
-	     /* Make sure we treat these like function calls since the
-	      * parser took sin(x) to be a function call.
-	      */
-	     if (0 == _SL_increment_frame_pointer ())
-	       {
-		  do_app_unary (addr->b.nt_unary_blk);
-		  (void) _SL_decrement_frame_pointer ();
-	       }
-	     break;
-
-	   case _SLANG_BC_ICONST:
-	     SLclass_push_int_obj (SLANG_INT_TYPE, addr->b.iconst_blk->i);
-	     break;
-
-#if SLANG_HAS_FLOAT
-	   case _SLANG_BC_DCONST:
-	     SLang_push_double (addr->b.dconst_blk->d);
-	     break;
-#endif
-
-	   case _SLANG_BC_PVARIABLE:
-	     if (-1 == _SLpush_slang_obj (&addr->b.nt_gvar_blk->obj))
-	       do_name_type_error (addr->b.nt_blk);
-	     break;
-
-	   case _SLANG_BC_PFUNCTION:
-	     execute_slang_fun (addr->b.nt_fun_blk);
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_BINARY:
-	     do_binary (addr->b.i_blk);
-	     break;
-	     
-	   case _SLANG_BC_LITERAL:
-#if !_SLANG_OPTIMIZE_FOR_SPEED
-	   case _SLANG_BC_LITERAL_INT:
-	   case _SLANG_BC_LITERAL_STR:
-#endif
-	       {
-		  SLang_Class_Type *cl = _SLclass_get_class (addr->bc_sub_type);
-		  (*cl->cl_push_literal) (addr->bc_sub_type, (VOID_STAR) &addr->b.ptr_blk);
-	       }
-	     break;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	   case _SLANG_BC_LITERAL_INT:
-	     SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk);
-	     break;
-
-	   case _SLANG_BC_LITERAL_STR:
-	     _SLang_dup_and_push_slstring (addr->b.s_blk);
-	     break;
-#endif
-	   case _SLANG_BC_BLOCK:
-	     switch (addr->bc_sub_type)
-	       {
-		case _SLANG_BCST_ERROR_BLOCK:
-		  err_block = addr;
-		  break;
-
-		case _SLANG_BCST_EXIT_BLOCK:
-		  Exit_Block_Ptr = addr->b.blk;
-		  break;
-
-		case _SLANG_BCST_USER_BLOCK0:
-		case _SLANG_BCST_USER_BLOCK1:
-		case _SLANG_BCST_USER_BLOCK2:
-		case _SLANG_BCST_USER_BLOCK3:
-		case _SLANG_BCST_USER_BLOCK4:
-		  User_Block_Ptr[addr->bc_sub_type - _SLANG_BCST_USER_BLOCK0] = addr->b.blk;
-		  break;
-
-		case _SLANG_BCST_LOOP:
-		case _SLANG_BCST_WHILE:
-		case _SLANG_BCST_FOR:
-		case _SLANG_BCST_FOREVER:
-		case _SLANG_BCST_CFOR:
-		case _SLANG_BCST_DOWHILE:
-		case _SLANG_BCST_FOREACH:
-		  if (block == NULL) block = addr;
-		  lang_do_loops(addr->bc_sub_type, block, 1 + (unsigned int) (addr - block));
-		  block = NULL;
-		  break;
-
-		case _SLANG_BCST_IFNOT:
-#if _SLANG_OPTIMIZE_FOR_SPEED
-		    {
-		       int i;
-		       
-		       if ((0 == pop_ctrl_integer (&i)) && (i == 0))
-			 inner_interp (addr->b.blk);
-		    }
-#else
-		  do_else_if (addr, NULL);
-#endif
-		  break;
-
-		case _SLANG_BCST_IF:
-#if _SLANG_OPTIMIZE_FOR_SPEED
-		    {
-		       int i;
-		       
-		       if ((0 == pop_ctrl_integer (&i)) && i)
-			 inner_interp (addr->b.blk);
-		    }
-#else
-		  do_else_if (NULL, addr);
-#endif
-		  break;
-
-		case _SLANG_BCST_NOTELSE:
-		  do_else_if (block, addr);
-		  block = NULL;
-		  break;
-
-		case _SLANG_BCST_ELSE:
-		  do_else_if (addr, block);
-		  block = NULL;
-		  break;
-
-		case _SLANG_BCST_SWITCH:
-		  if (Switch_Obj_Ptr == Switch_Obj_Max)
-		    {
-		       SLang_doerror("switch nesting too deep");
-		       break;
-		    }
-		  (void) SLang_pop (Switch_Obj_Ptr);
-		  Switch_Obj_Ptr++;
-
-		  if (block == NULL) block = addr;
-		  while ((SLang_Error == 0)
-			 && (block <= addr)
-			 && (Lang_Break_Condition == 0)
-			 && (0 == inner_interp (block->b.blk)))
-		    block++;
-		  Switch_Obj_Ptr--;
-		  SLang_free_object (Switch_Obj_Ptr);
-		  Switch_Obj_Ptr->data_type = 0;
-		  block = NULL;
-		  break;
-
-		case _SLANG_BCST_ANDELSE:
-		case _SLANG_BCST_ORELSE:
-		  if (block == NULL) block = addr;
-		  lang_do_and_orelse (addr->bc_sub_type, block, addr);
-		  block = NULL;
-		  break;
-
-		default:
-		  if (block == NULL) block =  addr;
-		  break;
-	       }
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_RETURN:
-	     Lang_Break_Condition = Lang_Return = Lang_Break = 1; return 1;
-	   case _SLANG_BC_BREAK:
-	     Lang_Break_Condition = Lang_Break = 1; return 1;
-	   case _SLANG_BC_CONTINUE:
-	     Lang_Break_Condition = /* Lang_Continue = */ 1; return 1;
-
-	   case _SLANG_BC_EXCH:
-	     (void) SLreverse_stack (2);
-	     break;
-
-	   case _SLANG_BC_LABEL:
-	       {
-		  int test;
-		  if ((0 == SLang_pop_integer (&test))
-		      && (test == 0))
-		    return 0;
-	       }
-	     break;
-
-	   case _SLANG_BC_LOBJPTR:
-	     (void)_SLang_push_ref (0, (VOID_STAR)(Local_Variable_Frame - addr->b.i_blk));
-	     break;
-
-	   case _SLANG_BC_GOBJPTR:
-	     (void)_SLang_push_ref (1, (VOID_STAR)addr->b.nt_blk);
-	     break;
-
-	   case _SLANG_BC_X_ERROR:
-	     if (err_block != NULL)
-	       {
-		  inner_interp(err_block->b.blk);
-		  if (SLang_Error) err_block = NULL;
-	       }
-	     else SLang_verror(SL_SYNTAX_ERROR, "No ERROR_BLOCK");
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_X_USER0:
-	   case _SLANG_BC_X_USER1:
-	   case _SLANG_BC_X_USER2:
-	   case _SLANG_BC_X_USER3:
-	   case _SLANG_BC_X_USER4:
-	     if (User_Block_Ptr[addr->bc_main_type - _SLANG_BC_X_USER0] != NULL)
-	       {
-		  inner_interp(User_Block_Ptr[addr->bc_main_type - _SLANG_BC_X_USER0]);
-	       }
-	     else SLang_verror(SL_SYNTAX_ERROR, "No block for X_USERBLOCK");
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT:
-	     (*addr->b.call_function) ();
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_FRAME:
-	     do_bc_call_direct_frame (addr->b.call_function);
-	     break;
-
-	   case _SLANG_BC_UNARY:
-	     do_unary (addr->b.i_blk, _SLANG_BC_UNARY);
-	     break;
-	     
-	   case _SLANG_BC_UNARY_FUNC:
-	     /* Make sure we treat these like function calls since the
-	      * parser took abs(x) to be a function call.
-	      */
-	     if (0 == _SL_increment_frame_pointer ())
-	       {
-		  do_unary (addr->b.i_blk, _SLANG_BC_UNARY);
-		  (void) _SL_decrement_frame_pointer ();
-	       }
-	     break;
-	     
-	   case _SLANG_BC_DEREF_ASSIGN:
-	     set_deref_lvalue (addr);
-	     break;
-	   case _SLANG_BC_SET_LOCAL_LVALUE:
-	     set_lvalue_obj (addr->bc_sub_type, Local_Variable_Frame - addr->b.i_blk);
-	     break;
-	   case _SLANG_BC_SET_GLOBAL_LVALUE:
-	     if (-1 == set_lvalue_obj (addr->bc_sub_type, &addr->b.nt_gvar_blk->obj))
-	       do_name_type_error (addr->b.nt_blk);
-	     break;
-	   case _SLANG_BC_SET_INTRIN_LVALUE:
-	     set_intrin_lvalue (addr);
-	     break;
-	   case _SLANG_BC_SET_STRUCT_LVALUE:
-	     set_struct_lvalue (addr);
-	     break;
-
-	   case _SLANG_BC_FIELD:
-	     (void) push_struct_field (addr->b.s_blk);
-	     break;
-
-	   case _SLANG_BC_SET_ARRAY_LVALUE:
-	     set_array_lvalue (addr->bc_sub_type);
-	     break;
-
-#if _SLANG_HAS_DEBUG_CODE
-	   case _SLANG_BC_LINE_NUM:
-	     break;
-#endif
-	     
-	   case _SLANG_BC_TMP:
-	     tmp_variable_function (addr);
-	     break;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	   case _SLANG_BC_LVARIABLE_AGET:
-	     if (0 == push_local_variable (addr->b.i_blk))
-	       do_bc_call_direct_frame (_SLarray_aget);
-	     break;
-
-	   case _SLANG_BC_LVARIABLE_APUT:
-	     if (0 == push_local_variable (addr->b.i_blk))
-	       do_bc_call_direct_frame (_SLarray_aput);
-	     break;
-	   case _SLANG_BC_INTEGER_PLUS:
-	     if (0 == SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk))
-	       do_binary (SLANG_PLUS);
-	     break;
-
-	   case _SLANG_BC_INTEGER_MINUS:
-	     if (0 == SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk))
-	       do_binary (SLANG_MINUS);
-	     break;
-#endif
-#if 0
-	   case _SLANG_BC_ARG_LVARIABLE:
-	     (void) SLang_start_arg_list ();
-	     push_local_variable (addr->b.i_blk);
-	     break;
-#endif
-	   case _SLANG_BC_EARG_LVARIABLE:
-	     push_local_variable (addr->b.i_blk);
-	     (void) SLang_end_arg_list ();
-	     break;
-
-#if USE_COMBINED_BYTECODES
-	   case _SLANG_BC_CALL_DIRECT_INTRINSIC:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     execute_intrinsic_fun (addr->b.nt_ifun_blk);
-	     if (SLang_Error)
-	       do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
-	     break;
-
-	   case _SLANG_BC_INTRINSIC_CALL_DIRECT:
-	     execute_intrinsic_fun (addr->b.nt_ifun_blk);
-	     if (SLang_Error)
-	       {
-		  do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
-		  break;
-	       }
-	     addr++;
-	     (*addr->b.call_function) ();
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_LSTR:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     _SLang_dup_and_push_slstring (addr->b.s_blk);
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_SLFUN:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     execute_slang_fun (addr->b.nt_fun_blk);
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_INTRSTOP:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     /* drop */
-	   case _SLANG_BC_INTRINSIC_STOP:
-	     execute_intrinsic_fun (addr->b.nt_ifun_blk);
-	     if (SLang_Error == 0)
-	       return 1;
-	     do_traceback(addr->b.nt_ifun_blk->name, 0, NULL);
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_EARG_LVAR:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     push_local_variable (addr->b.i_blk);
-	     (void) SLang_end_arg_list ();
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_LINT:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     SLclass_push_int_obj (addr->bc_sub_type, (int) addr->b.l_blk);
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT_LVAR:
-	     (*addr->b.call_function) ();
-	     addr++;
-	     push_local_variable (addr->b.i_blk);
-	     break;
-#endif				       /* USE_COMBINED_BYTECODES */
-
-	   default:
-	     SLang_verror (SL_INTERNAL_ERROR, "Byte-Code 0x%X is not valid", addr->bc_main_type);
-	  }
-
-	/* Someday I plan to add a 'signal' intrinsic function.  Then when a
-	 * signal is caught, a variable will be set to one and that value of
-	 * that variable will need to be monitored here, e.g.,
-	 * if (Handle_Signal) handle_signal ();
-	 * It would be nice to check only one variable instead of Handle_Signal
-	 * and SLang_Error.  Perhaps I should phase out SLang_Error = xxx
-	 * and used something like: SLang_set_error (code);  Then, I could
-	 * use:
-	 * if (Handle_Condition)
-	 *   {
-	 *      Handle_Condition = 0;
-	 *      if (SLang_Error) ....
-	 *      else if (Handle_Signal) handle_signal ();
-	 *      else....
-	 *   }
-	 */
-	if (SLang_Error)
-	  {
-	     if (-1 == do_inner_interp_error (err_block, addr_start, addr))
-	       return 1;
-	     if (SLang_Error)
-	       return 1;
-
-	     /* Otherwise, error cleared.  Continue onto next bytecode.
-	      * Someday I need to add something to indicate where the
-	      * next statement begins since continuing on the next
-	      * bytecode is not really what is desired.
-	      */
-	     if (Lang_Break_Condition) goto handle_break_condition;
-	  }
-	addr++;
-     }
-
-   handle_break_condition:
-   /* Get here if Lang_Break_Condition != 0, which implies that either
-    * Lang_Return, Lang_Break, or Lang_Continue is non zero
-    */
-   if (Lang_Return)
-     Lang_Break = 1;
-
-   return 1;
-}
-
-/*}}}*/
-
-/* The functions below this point are used to implement the parsed token
- * to byte-compiled code.
- */
-/* static SLang_Name_Type **Static_Hash_Table; */
-
-static SLang_Name_Type **Locals_Hash_Table;
-static int Local_Variable_Number;
-static unsigned int Function_Args_Number;
-int _SLang_Auto_Declare_Globals = 0;
-int (*SLang_Auto_Declare_Var_Hook) (char *);
-
-static SLang_NameSpace_Type *This_Static_NameSpace;
-static SLang_NameSpace_Type *Global_NameSpace;
-
-#if _SLANG_HAS_DEBUG_CODE
-static char *This_Compile_Filename;
-#endif
-static SLBlock_Type SLShort_Blocks[6];
-/* These are initialized in add_table below.  I cannot init a Union!! */
-
-static int Lang_Defining_Function;
-static void (*Default_Variable_Mode) (_SLang_Token_Type *);
-static void (*Default_Define_Function) (char *, unsigned long);
-
-static int push_compile_context (char *);
-static int pop_compile_context (void);
-
-typedef struct
-{
-   int block_type;
-   SLBlock_Type *block;		       /* beginning of block definition */
-   SLBlock_Type *block_ptr;	       /* current location */
-   SLBlock_Type *block_max;	       /* end of definition */
-   SLang_NameSpace_Type *static_namespace;
-}
-Block_Context_Type;
-
-static Block_Context_Type Block_Context_Stack [SLANG_MAX_BLOCK_STACK_LEN];
-static unsigned int Block_Context_Stack_Len;
-
-static SLBlock_Type *Compile_ByteCode_Ptr;
-static SLBlock_Type *This_Compile_Block;
-static SLBlock_Type *This_Compile_Block_Max;
-static int This_Compile_Block_Type;
-#define COMPILE_BLOCK_TYPE_FUNCTION	1
-#define COMPILE_BLOCK_TYPE_BLOCK	2
-#define COMPILE_BLOCK_TYPE_TOP_LEVEL	3
-
-/* If it returns 0, DO NOT FREE p */
-static int lang_free_branch (SLBlock_Type *p)
-{
-   /* Note: we look at 0,2,4, since these blocks are 0 terminated */
-   if ((p == SLShort_Blocks)
-       || (p == SLShort_Blocks + 2)
-       || (p == SLShort_Blocks + 4)
-       )
-     return 0;
-
-   while (1)
-     {
-	SLang_Class_Type *cl;
-
-        switch (p->bc_main_type)
-	  {
-	   case _SLANG_BC_BLOCK:
-	     if (lang_free_branch(p->b.blk))
-	       SLfree((char *)p->b.blk);
-	     break;
-
-	   case _SLANG_BC_LITERAL:
-	   case _SLANG_BC_LITERAL_STR:
-	     /* No user types should be here. */
-	     cl = _SLclass_get_class (p->bc_sub_type);
-	     (*cl->cl_byte_code_destroy) (p->bc_sub_type, (VOID_STAR) &p->b.ptr_blk);
-	     break;
-
-	   case _SLANG_BC_FIELD:
-	   case _SLANG_BC_SET_STRUCT_LVALUE:
-	     SLang_free_slstring (p->b.s_blk);
-	     break;
-
-	   default:
-	     break;
-
-	   case 0:
-	     return 1;
-	  }
-	p++;
-     }
-}
-
-static void free_function_header (_SLBlock_Header_Type *h)
-{
-   if (h->num_refs > 1)
-     {
-	h->num_refs--;
-	return;
-     }
-
-   if (h->body != NULL)
-     {
-	if (lang_free_branch (h->body))
-	  SLfree ((char *) h->body);
-     }
-
-   SLfree ((char *) h);
-}
-
-static int push_block_context (int type)
-{
-   Block_Context_Type *c;
-   unsigned int num;
-   SLBlock_Type *b;
-
-   if (Block_Context_Stack_Len == SLANG_MAX_BLOCK_STACK_LEN)
-     {
-	SLang_verror (SL_STACK_OVERFLOW, "Block stack overflow");
-	return -1;
-     }
-
-   num = 5;    /* 40 bytes */
-   if (NULL == (b = (SLBlock_Type *) SLcalloc (num, sizeof (SLBlock_Type))))
-     return -1;
-
-   c = Block_Context_Stack + Block_Context_Stack_Len;
-   c->block = This_Compile_Block;
-   c->block_ptr = Compile_ByteCode_Ptr;
-   c->block_max = This_Compile_Block_Max;
-   c->block_type = This_Compile_Block_Type;
-   c->static_namespace = This_Static_NameSpace;
-
-   Compile_ByteCode_Ptr = This_Compile_Block = b;
-   This_Compile_Block_Max = b + num;
-   This_Compile_Block_Type = type;
-
-   Block_Context_Stack_Len += 1;
-   return 0;
-}
-
-static int pop_block_context (void)
-{
-   Block_Context_Type *c;
-
-   if (Block_Context_Stack_Len == 0)
-     return -1;
-
-   Block_Context_Stack_Len -= 1;
-   c = Block_Context_Stack + Block_Context_Stack_Len;
-
-   This_Compile_Block = c->block;
-   This_Compile_Block_Max = c->block_max;
-   This_Compile_Block_Type = c->block_type;
-   Compile_ByteCode_Ptr = c->block_ptr;
-   This_Static_NameSpace = c->static_namespace;
-
-   return 0;
-}
-
-int _SLcompile_push_context (SLang_Load_Type *load_object)
-{
-   if (-1 == push_compile_context (load_object->name))
-     return -1;
-
-   if (NULL == (This_Static_NameSpace = _SLns_allocate_namespace (load_object->name, SLSTATIC_HASH_TABLE_SIZE)))
-     {
-	pop_compile_context ();
-	return -1;
-     }
-
-   if (-1 == push_block_context (COMPILE_BLOCK_TYPE_TOP_LEVEL))
-     {
-	pop_compile_context ();
-	return -1;
-     }
-
-   return 0;
-}
-
-int _SLcompile_pop_context (void)
-{
-   if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     {
-	Compile_ByteCode_Ptr->bc_main_type = 0;
-	if (lang_free_branch (This_Compile_Block))
-	  SLfree ((char *) This_Compile_Block);
-     }
-
-   (void) pop_block_context ();
-   (void) pop_compile_context ();
-
-   if (This_Compile_Block == NULL)
-     return 0;
-
-#if 0
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     {
-	SLang_verror (SL_INTERNAL_ERROR, "Not at top-level");
-	return -1;
-     }
-#endif
-
-   return 0;
-}
-
-/*{{{ Hash and Name Table Functions */
-
-static SLang_Name_Type *locate_name_in_table (char *name, unsigned long hash,
-					      SLang_Name_Type **table, unsigned int table_size)
-{
-   SLang_Name_Type *t;
-   char ch;
-
-   t = table [(unsigned int) (hash % table_size)];
-   ch = *name++;
-
-   while (t != NULL)
-     {
-	if ((ch == t->name[0])
-	    && (0 == strcmp (t->name + 1, name)))
-	  break;
-
-	t = t->next;
-     }
-
-   return t;
-}
-
-static SLang_Name_Type *locate_namespace_encoded_name (char *name, int err_on_bad_ns)
-{
-   char *ns, *ns1;
-   SLang_NameSpace_Type *table;
-   SLang_Name_Type *nt;
-
-   ns = name;
-   name = strchr (name, '-');
-   if ((name == NULL) || (name [1] != '>'))
-     name = ns;
-
-   ns1 = SLang_create_nslstring (ns, (unsigned int) (name - ns));
-   if (ns1 == NULL)
-     return NULL;
-   if (ns != name)
-     name += 2;
-   ns = ns1;
-
-   if (*ns == 0)
-     {
-	/* Use Global Namespace */
-	SLang_free_slstring (ns);
-	return locate_name_in_table (name, _SLcompute_string_hash (name),
-				     Global_NameSpace->table, Global_NameSpace->table_size);
-     }
-
-   if (NULL == (table = _SLns_find_namespace (ns)))
-     {
-	if (err_on_bad_ns)
-	  SLang_verror (SL_SYNTAX_ERROR, "Unable to find namespace called %s", ns);
-	SLang_free_slstring (ns);
-	return NULL;
-     }
-   SLang_free_slstring (ns);
-
-   /* FIXME: the hash table size should be stored in the hash table itself */
-   nt = locate_name_in_table (name, _SLcompute_string_hash (name),
-			      table->table, table->table_size);
-   if (nt == NULL)
-     return NULL;
-
-   switch (nt->name_type)
-     {
-	/* These are private and cannot be accessed through the namespace. */
-      case SLANG_PVARIABLE:
-      case SLANG_PFUNCTION:
-	return NULL;
-     }
-   return nt;
-}
-
-static SLang_Name_Type *locate_hashed_name (char *name, unsigned long hash)
-{
-   SLang_Name_Type *t;
-
-   if (Lang_Defining_Function)
-     {
-	t = locate_name_in_table (name, hash, Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE);
-	if (t != NULL)
-	  return t;
-     }
-
-   if ((This_Static_NameSpace != NULL)
-       && (NULL != (t = locate_name_in_table (name, hash, This_Static_NameSpace->table, This_Static_NameSpace->table_size))))
-     return t;
-
-   t = locate_name_in_table (name, hash, Global_NameSpace->table, Global_NameSpace->table_size);
-   if (NULL != t)
-     return t;
-
-   return locate_namespace_encoded_name (name, 1);
-}
-
-SLang_Name_Type *_SLlocate_name (char *name)
-{
-   return locate_hashed_name (name, _SLcompute_string_hash (name));
-}
-
-static SLang_Name_Type *
-add_name_to_hash_table (char *name, unsigned long hash,
-			unsigned int sizeof_obj, unsigned char name_type,
-			SLang_Name_Type **table, unsigned int table_size,
-			int check_existing)
-{
-   SLang_Name_Type *t;
-
-   if (check_existing)
-     {
-	t = locate_name_in_table (name, hash, table, table_size);
-	if (t != NULL)
-	  return t;
-     }
-
-   if (-1 == _SLcheck_identifier_syntax (name))
-     return NULL;
-
-   t = (SLang_Name_Type *) SLmalloc (sizeof_obj);
-   if (t == NULL)
-     return t;
-
-   memset ((char *) t, 0, sizeof_obj);
-   if (NULL == (t->name = _SLstring_dup_hashed_string (name, hash)))
-     {
-	SLfree ((char *) t);
-	return NULL;
-     }
-   t->name_type = name_type;
-
-   hash = hash % table_size;
-   t->next = table [(unsigned int)hash];
-   table [(unsigned int) hash] = t;
-
-   return t;
-}
-
-static SLang_Name_Type *
-add_global_name (char *name, unsigned long hash,
-		 unsigned char name_type, unsigned int sizeof_obj,
-		 SLang_NameSpace_Type *ns)
-{
-   SLang_Name_Type *nt;
-   SLang_Name_Type **table;
-   unsigned int table_size;
-   
-   table = ns->table;
-   table_size = ns->table_size;
-
-   nt = locate_name_in_table (name, hash, table, table_size);
-   if (nt != NULL)
-     {
-	if (nt->name_type == name_type)
-	  return nt;
-
-	SLang_verror (SL_DUPLICATE_DEFINITION, "%s cannot be re-defined", name);
-	return NULL;
-     }
-
-   return add_name_to_hash_table (name, hash, sizeof_obj, name_type,
-				  table, table_size, 0);
-}
-
-static int add_intrinsic_function (SLang_NameSpace_Type *ns,
-				   char *name, FVOID_STAR addr, unsigned char ret_type,
-				   unsigned int nargs, va_list ap)
-{
-   SLang_Intrin_Fun_Type *f;
-   unsigned int i;
-
-   if (-1 == init_interpreter ())
-     return -1;
-   
-   if (ns == NULL) ns = Global_NameSpace;
-
-   if (nargs > SLANG_MAX_INTRIN_ARGS)
-     {
-	SLang_verror (SL_APPLICATION_ERROR, "Function %s requires too many arguments", name);
-	return -1;
-     }
-
-   if (ret_type == SLANG_FLOAT_TYPE)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "Function %s is not permitted to return float", name);
-	return -1;
-     }
-
-   f = (SLang_Intrin_Fun_Type *) add_global_name (name, _SLcompute_string_hash (name),
-						  SLANG_INTRINSIC, sizeof (SLang_Intrin_Fun_Type),
-						  ns);
-
-   if (f == NULL)
-     return -1;
-
-   f->i_fun = addr;
-   f->num_args = nargs;
-   f->return_type = ret_type;
-
-   for (i = 0; i < nargs; i++)
-     f->arg_types [i] = va_arg (ap, unsigned int);
-
-   return 0;
-}
-
-int SLadd_intrinsic_function (char *name, FVOID_STAR addr, unsigned char ret_type,
-			      unsigned int nargs, ...)
-{
-   va_list ap;
-   int status;
-
-   va_start (ap, nargs);
-   status = add_intrinsic_function (NULL, name, addr, ret_type, nargs, ap);
-   va_end (ap);
-
-   return status;
-}
-
-int SLns_add_intrinsic_function (SLang_NameSpace_Type *ns, 
-				 char *name, FVOID_STAR addr, unsigned char ret_type,
-				 unsigned int nargs, ...)
-{
-   va_list ap;
-   int status;
-
-   va_start (ap, nargs);
-   status = add_intrinsic_function (ns, name, addr, ret_type, nargs, ap);
-   va_end (ap);
-
-   return status;
-}
-
-int SLns_add_intrinsic_variable (SLang_NameSpace_Type *ns,
-				   char *name, VOID_STAR addr, unsigned char data_type, int ro)
-{
-   SLang_Intrin_Var_Type *v;
-
-   if (-1 == init_interpreter ())
-     return -1;
-   
-   if (ns == NULL) ns = Global_NameSpace;
-
-   v = (SLang_Intrin_Var_Type *)add_global_name (name,
-						 _SLcompute_string_hash (name),
-						 (ro ? SLANG_RVARIABLE : SLANG_IVARIABLE),
-						 sizeof (SLang_Intrin_Var_Type),
-						 ns);
-   if (v == NULL)
-     return -1;
-
-   v->addr = addr;
-   v->type = data_type;
-   return 0;
-}
-  
-int SLadd_intrinsic_variable (char *name, VOID_STAR addr, unsigned char data_type, int ro)
-{
-   return SLns_add_intrinsic_variable (NULL, name, addr, data_type, ro);
-}
-
-static int
-add_slang_function (char *name, unsigned char type, unsigned long hash,
-		    unsigned int num_args, unsigned int num_locals,
-#if _SLANG_HAS_DEBUG_CODE
-		    char *file,
-#endif
-		    _SLBlock_Header_Type *h, 
-		    SLang_NameSpace_Type *ns)
-{
-   _SLang_Function_Type *f;
-   
-#if _SLANG_HAS_DEBUG_CODE
-   if ((file != NULL)
-       && (NULL == (file = SLang_create_slstring (file))))
-     return -1;
-#endif
-
-   f = (_SLang_Function_Type *)add_global_name (name, hash,
-						type,
-						sizeof (_SLang_Function_Type),
-						ns);
-   if (f == NULL)
-     {
-#if _SLANG_HAS_DEBUG_CODE
-	SLang_free_slstring (file);    /* NULL ok */
-#endif
-	return -1;
-     }
-
-   if (f->v.header != NULL)
-     {
-	if (f->nlocals == AUTOLOAD_NUM_LOCALS)
-	  SLang_free_slstring ((char *)f->v.autoload_filename); /* autoloaded filename */
-	else
-	  free_function_header (f->v.header);
-     }
-
-#if _SLANG_HAS_DEBUG_CODE
-   if (f->file != NULL) SLang_free_slstring (f->file);
-   f->file = file;
-#endif
-   f->v.header = h;
-   f->nlocals = num_locals;
-   f->nargs = num_args;
-
-   return 0;
-}
-
-int SLang_autoload (char *name, char *file)
-{
-   _SLang_Function_Type *f;
-   unsigned long hash;
-
-   hash = _SLcompute_string_hash (name);
-   f = (_SLang_Function_Type *)locate_name_in_table (name, hash, Global_NameSpace->table, Global_NameSpace->table_size);
-
-   if ((f != NULL)
-       && (f->name_type == SLANG_FUNCTION)
-       && (f->v.header != NULL)
-       && (f->nlocals != AUTOLOAD_NUM_LOCALS))
-     {
-	/* already loaded */
-	return 0;
-     }
-
-   file = SLang_create_slstring (file);
-   if (-1 == add_slang_function (name, SLANG_FUNCTION, hash, 0, AUTOLOAD_NUM_LOCALS,
-#if _SLANG_HAS_DEBUG_CODE
-				 file,
-#endif
-				 (_SLBlock_Header_Type *) file,
-				 Global_NameSpace))
-     {
-	SLang_free_slstring (file);
-	return -1;
-     }
-
-   return 0;
-}
-
-SLang_Name_Type *_SLlocate_global_name (char *name)
-{
-   unsigned long hash;
-
-   hash = _SLcompute_string_hash (name);
-   return locate_name_in_table (name, hash, Global_NameSpace->table, 
-				Global_NameSpace->table_size);
-}
-
-/*}}}*/
-
-static void free_local_variable_table (void)
-{
-   unsigned int i;
-   SLang_Name_Type *t, *t1;
-
-   for (i = 0; i < SLLOCALS_HASH_TABLE_SIZE; i++)
-     {
-	t = Locals_Hash_Table [i];
-	while (t != NULL)
-	  {
-	     SLang_free_slstring (t->name);
-	     t1 = t->next;
-	     SLfree ((char *) t);
-	     t = t1;
-	  }
-	Locals_Hash_Table [i] = NULL;
-     }
-   Local_Variable_Number = 0;
-}
-
-/* call inner interpreter or return for more */
-static void lang_try_now(void)
-{
-   Compile_ByteCode_Ptr++;
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     return;
-
-   Compile_ByteCode_Ptr->bc_main_type = 0;  /* so next command stops after this */
-
-   /* now do it */
-   inner_interp (This_Compile_Block);
-   (void) lang_free_branch (This_Compile_Block);
-   Compile_ByteCode_Ptr = This_Compile_Block;
-}
-
-SLang_Name_Type *SLang_get_fun_from_ref (SLang_Ref_Type *ref)
-{
-   if (ref->is_global)
-     {
-	SLang_Name_Type *nt = ref->v.nt;
-
-	switch (nt->name_type)
-	  {
-	   case SLANG_PFUNCTION:
-	   case SLANG_FUNCTION:
-	   case SLANG_INTRINSIC:
-	   case SLANG_MATH_UNARY:
-	   case SLANG_APP_UNARY:
-	     return nt;
-	  }
-	SLang_verror (SL_TYPE_MISMATCH,
-		      "Reference to a function expected.  Found &%s", 
-		      nt->name);
-     }
-
-   SLang_verror (SL_TYPE_MISMATCH,
-		 "Reference to a function expected");
-   return NULL;
-}
-
-int SLexecute_function (SLang_Name_Type *nt)
-{
-   unsigned char type;
-   char *name;
-
-   if (SLang_Error)
-     return -1;
-
-   type = nt->name_type;
-   name = nt->name;
-
-   switch (type)
-     {
-      case SLANG_PFUNCTION:
-      case SLANG_FUNCTION:
-	execute_slang_fun ((_SLang_Function_Type *) nt);
-	break;
-
-      case SLANG_INTRINSIC:
-	execute_intrinsic_fun ((SLang_Intrin_Fun_Type *) nt);
-	break;
-
-      case SLANG_MATH_UNARY:
-      case SLANG_APP_UNARY:
-	inner_interp_nametype (nt);
-	break;
-
-      default:
-	SLang_verror (SL_TYPE_MISMATCH, "%s is not a function", name);
-	return -1;
-     }
-
-   if (SLang_Error)
-     {
-	SLang_verror (SLang_Error, "Error while executing %s", name);
-	return -1;
-     }
-
-   return 1;
-}
-
-int SLang_execute_function (char *name)
-{
-   SLang_Name_Type *entry;
-
-   if (NULL == (entry = SLang_get_function (name)))
-     return 0;
-
-   return SLexecute_function (entry);
-}
-
-/* return S-Lang function or NULL */
-SLang_Name_Type *SLang_get_function (char *name)
-{
-   SLang_Name_Type *entry;
-
-   if (NULL == (entry = locate_namespace_encoded_name (name, 0)))
-     return NULL;
-
-   if ((entry->name_type == SLANG_FUNCTION)
-       || (entry->name_type == SLANG_INTRINSIC))
-     return entry;
-
-   return NULL;
-}
-
-static void lang_begin_function (void)
-{
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Function nesting is illegal");
-	return;
-     }
-   Lang_Defining_Function = 1;
-   (void) push_block_context (COMPILE_BLOCK_TYPE_FUNCTION);
-}
-
-#if USE_COMBINED_BYTECODES
-static void optimize_block (SLBlock_Type *b)
-{
-   while (1)
-     {
-	switch (b->bc_main_type)
-	  {
-	   case 0:
-	     return;
-	     
-	   default:
-	     b++;
-	     break;
-
-	   case _SLANG_BC_CALL_DIRECT:
-	     b++;
-	     switch (b->bc_main_type)
-	       {
-		case 0:
-		  return;
-		case _SLANG_BC_INTRINSIC:
-		  if ((b+1)->bc_main_type == 0)
-		    {
-		       (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_INTRSTOP;
-		       return;
-		    }
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_INTRINSIC;
-		  b++;
-		  break;
-		case _SLANG_BC_LITERAL_STR:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LSTR;
-		  b++;
-		  break;
-		case _SLANG_BC_FUNCTION:
-		case _SLANG_BC_PFUNCTION:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_SLFUN;
-		  b++;
-		  break;
-		case _SLANG_BC_EARG_LVARIABLE:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_EARG_LVAR;
-		  b++;
-		  break;
-		case _SLANG_BC_LITERAL_INT:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LINT;
-		  b++;
-		  break;
-		case _SLANG_BC_LVARIABLE:
-		  (b-1)->bc_main_type = _SLANG_BC_CALL_DIRECT_LVAR;
-		  b++;
-		  break;
-	       }
-	     break;
-	     
-	   case _SLANG_BC_INTRINSIC:
-	     b++;
-	     switch (b->bc_main_type)
-	       {
-		case _SLANG_BC_CALL_DIRECT:
-		  (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_CALL_DIRECT;
-		  b++;
-		  break;
-#if 0
-		case _SLANG_BC_BLOCK:
-		  (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_BLOCK;
-		  b++;
-		  break;
-#endif
-
-		case 0:
-		  (b-1)->bc_main_type = _SLANG_BC_INTRINSIC_STOP;
-		  return;
-	       }	     
-	     break;
-	  }
-     }
-}
-
-#endif
-
-
-/* name will be NULL if the object is to simply terminate the function
- * definition.  See SLang_restart.
- */
-static int lang_define_function (char *name, unsigned char type, unsigned long hash,
-				 SLang_NameSpace_Type *ns)
-{
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_FUNCTION)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Premature end of function");
-	return -1;
-     }
-
-   /* terminate function */
-   Compile_ByteCode_Ptr->bc_main_type = 0;
-
-   if (name != NULL)
-     {
-	_SLBlock_Header_Type *h;
-
-	h = (_SLBlock_Header_Type *)SLmalloc (sizeof (_SLBlock_Header_Type));
-	if (h != NULL)
-	  {
-	     h->num_refs = 1;
-	     h->body = This_Compile_Block;
-	     
-#if USE_COMBINED_BYTECODES
-	     optimize_block (h->body);
-#endif
-
-	     if (-1 == add_slang_function (name, type, hash,
-					   Function_Args_Number,
-					   Local_Variable_Number,
-#if _SLANG_HAS_DEBUG_CODE
-					   This_Compile_Filename,
-#endif
-					   h, ns))
-	       SLfree ((char *) h);
-	  }
-	/* Drop through for clean-up */
-     }
-
-   free_local_variable_table ();
-
-   Function_Args_Number = 0;
-   Lang_Defining_Function = 0;
-
-   if (SLang_Error) return -1;
-   /* SLang_restart will finish this if there is a slang error. */
-
-   pop_block_context ();
-
-   /* A function is only defined at top-level */
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-     {
-	SLang_verror (SL_INTERNAL_ERROR, "Not at top-level");
-	return -1;
-     }
-   Compile_ByteCode_Ptr = This_Compile_Block;
-   return 0;
-}
-
-static void define_static_function (char *name, unsigned long hash)
-{
-   (void) lang_define_function (name, SLANG_FUNCTION, hash, This_Static_NameSpace);
-}
-
-static void define_private_function (char *name, unsigned long hash)
-{
-   (void) lang_define_function (name, SLANG_PFUNCTION, hash, This_Static_NameSpace);
-}
-
-static void define_public_function (char *name, unsigned long hash)
-{
-   (void) lang_define_function (name, SLANG_FUNCTION, hash, Global_NameSpace);
-}
-
-static void lang_end_block (void)
-{
-   SLBlock_Type *node, *branch;
-   unsigned char mtype;
-
-   if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Not defining a block");
-	return;
-     }
-
-   /* terminate the block */
-   Compile_ByteCode_Ptr->bc_main_type = 0;
-   branch = This_Compile_Block;
-
-   /* Try to save some space by using the cached blocks. */
-   if (Compile_ByteCode_Ptr == branch + 1)
-     {
-	mtype = branch->bc_main_type;
-	if (((mtype == _SLANG_BC_BREAK)
-	     || (mtype == _SLANG_BC_CONTINUE)
-	     || (mtype == _SLANG_BC_RETURN))
-	    && (SLang_Error == 0))
-	  {
-	     SLfree ((char *)branch);
-	     branch = SLShort_Blocks + 2 * (int) (mtype - _SLANG_BC_RETURN);
-	  }
-     }
-
-#if USE_COMBINED_BYTECODES
-   optimize_block (branch);
-#endif
-
-   pop_block_context ();
-   node = Compile_ByteCode_Ptr++;
-
-   node->bc_main_type = _SLANG_BC_BLOCK;
-   node->bc_sub_type = 0;
-   node->b.blk = branch;
-}
-
-static int lang_begin_block (void)
-{
-   return push_block_context (COMPILE_BLOCK_TYPE_BLOCK);
-}
-
-static int lang_check_space (void)
-{
-   unsigned int n;
-   SLBlock_Type *p;
-
-   if (NULL == (p = This_Compile_Block))
-     {
-	SLang_verror (SL_INTERNAL_ERROR, "Top-level block not present");
-	return -1;
-     }
-
-   /* Allow 1 extra for terminator */
-   if (Compile_ByteCode_Ptr + 1 < This_Compile_Block_Max)
-     return 0;
-
-   n = (unsigned int) (This_Compile_Block_Max - p);
-
-   /* enlarge the space by 2 objects */
-   n += 2;
-
-   if (NULL == (p = (SLBlock_Type *) SLrealloc((char *)p, n * sizeof(SLBlock_Type))))
-     return -1;
-
-   This_Compile_Block_Max = p + n;
-   n = (unsigned int) (Compile_ByteCode_Ptr - This_Compile_Block);
-   This_Compile_Block = p;
-   Compile_ByteCode_Ptr = p + n;
-
-   return 0;
-}
-
-/* returns positive number if name is a function or negative number if it
- is a variable.  If it is intrinsic, it returns magnitude of 1, else 2 */
-int SLang_is_defined(char *name)
-{
-   SLang_Name_Type *t;
-
-   if (-1 == init_interpreter ())
-     return -1;
-
-   t = locate_namespace_encoded_name (name, 0);
-   if (t == NULL)
-     return 0;
-
-   switch (t->name_type)
-     {
-      case SLANG_FUNCTION:
-      /* case SLANG_PFUNCTION: */
-	return 2;
-      case SLANG_GVARIABLE:
-      /* case SLANG_PVARIABLE: */
-	return -2;
-
-      case SLANG_ICONSTANT:
-      case SLANG_DCONSTANT:
-      case SLANG_RVARIABLE:
-      case SLANG_IVARIABLE:
-	return -1;
-
-      case SLANG_INTRINSIC:
-      default:
-	return 1;
-     }
-}
-
-static int add_global_variable (char *name, char name_type, unsigned long hash,
-				SLang_NameSpace_Type *ns)
-{
-   SLang_Name_Type *g;
-
-   /* Note the importance of checking if it is already defined or not.  For example,
-    * suppose X is defined as an intrinsic variable.  Then S-Lang code like:
-    * !if (is_defined("X")) { variable X; }
-    * will not result in a global variable X.  On the other hand, this would
-    * not be an issue if 'variable' statements always were not processed
-    * immediately.  That is, as it is now, 'if (0) {variable ZZZZ;}' will result
-    * in the variable ZZZZ being defined because of the immediate processing.
-    * The current solution is to do: if (0) { eval("variable ZZZZ;"); }
-    */
-   /* hash = _SLcompute_string_hash (name); */
-   g = locate_name_in_table (name, hash, ns->table, ns->table_size);
-
-   if (g != NULL)
-     {
-	if (g->name_type == name_type)
-	  return 0;
-     }
-
-   if (NULL == add_global_name (name, hash, name_type,
-				sizeof (SLang_Global_Var_Type), ns))
-     return -1;
-
-   return 0;
-}
-
-int SLadd_global_variable (char *name)
-{
-   if (-1 == init_interpreter ())
-     return -1;
-
-   return add_global_variable (name, SLANG_GVARIABLE,
-			       _SLcompute_string_hash (name),
-			       Global_NameSpace);
-}
-
-static int add_local_variable (char *name, unsigned long hash)
-{
-   SLang_Local_Var_Type *t;
-
-   /* local variable */
-   if (Local_Variable_Number >= SLANG_MAX_LOCAL_VARIABLES)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Too many local variables");
-	return -1;
-     }
-
-   if (NULL != locate_name_in_table (name, hash, Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Local variable %s has already been defined", name);
-	return -1;
-     }
-
-   t = (SLang_Local_Var_Type *)
-     add_name_to_hash_table (name, hash,
-			     sizeof (SLang_Local_Var_Type), SLANG_LVARIABLE,
-			     Locals_Hash_Table, SLLOCALS_HASH_TABLE_SIZE, 0);
-   if (t == NULL)
-     return -1;
-
-   t->local_var_number = Local_Variable_Number;
-   Local_Variable_Number++;
-   return 0;
-}
-
-static void (*Compile_Mode_Function) (_SLang_Token_Type *);
-static void compile_basic_token_mode (_SLang_Token_Type *);
-
-/* if an error occurs, discard current object, block, function, etc... */
-void SLang_restart (int localv)
-{
-   int save = SLang_Error;
-
-   SLang_Error = SL_UNKNOWN_ERROR;
-
-   _SLcompile_ptr = _SLcompile;
-   Compile_Mode_Function = compile_basic_token_mode;
-
-   Lang_Break = /* Lang_Continue = */ Lang_Return = 0;
-   Trace_Mode = 0;
-
-   while (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_BLOCK)
-     lang_end_block();
-
-   if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_FUNCTION)
-     {
-	/* Terminate function definition and free variables */
-	lang_define_function (NULL, SLANG_FUNCTION, 0, Global_NameSpace);
-	if (lang_free_branch (This_Compile_Block))
-	  SLfree((char *)This_Compile_Block);
-     }
-   Lang_Defining_Function = 0;
-
-   SLang_Error = save;
-
-   if (SLang_Error == SL_STACK_OVERFLOW)
-     {
-	/* This loop guarantees that the stack is properly cleaned. */
-	while (_SLStack_Pointer != _SLRun_Stack)
-	  {
-	     SLdo_pop ();
-	  }
-     }
-
-   while ((This_Compile_Block_Type != COMPILE_BLOCK_TYPE_TOP_LEVEL)
-	  && (0 == pop_block_context ()))
-     ;
-
-   if (localv)
-     {
-	Next_Function_Num_Args = SLang_Num_Function_Args = 0;
-	Local_Variable_Frame = Local_Variable_Stack;
-	Recursion_Depth = 0;
-	Frame_Pointer = _SLStack_Pointer;
-	Frame_Pointer_Depth = 0;
-	Switch_Obj_Ptr = Switch_Objects;
-	while (Switch_Obj_Ptr < Switch_Obj_Max)
-	  {
-	     SLang_free_object (Switch_Obj_Ptr);
-	     Switch_Obj_Ptr++;
-	  }
-	Switch_Obj_Ptr = Switch_Objects;
-     }
-}
-
-static void compile_directive (unsigned char sub_type)
-{
-   /* This function is called only from compile_directive_mode which is
-    * only possible when a block is available.
-    */
-
-   /* use BLOCK */
-   Compile_ByteCode_Ptr--;
-   Compile_ByteCode_Ptr->bc_sub_type = sub_type;
-
-   lang_try_now ();
-}
-
-static void compile_unary (int op, unsigned char mt)
-{
-   Compile_ByteCode_Ptr->bc_main_type = mt;
-   Compile_ByteCode_Ptr->b.i_blk = op;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-
-   lang_try_now ();
-}
-
-
-static void compile_binary (int op)
-{
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_BINARY;
-   Compile_ByteCode_Ptr->b.i_blk = op;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-
-   lang_try_now ();
-}
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-static int try_compressed_bytecode (unsigned char last_bc, unsigned char bc)
-{
-   if (Compile_ByteCode_Ptr != This_Compile_Block)
-     {
-	SLBlock_Type *b;
-	b = Compile_ByteCode_Ptr - 1;
-	if (b->bc_main_type == last_bc)
-	  {
-	     Compile_ByteCode_Ptr = b;
-	     b->bc_main_type = bc;
-	     lang_try_now ();
-	     return 0;
-	  }
-     }
-   return -1;
-}
-#endif
-
-static void compile_fast_binary (int op, unsigned char bc)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (0 == try_compressed_bytecode (_SLANG_BC_LITERAL_INT, bc))
-     return;
-#else
-   (void) bc;
-#endif
-   compile_binary (op);
-}
-
-/* This is a hack */
-typedef struct _Special_NameTable_Type
-{
-   char *name;
-   int (*fun) (struct _Special_NameTable_Type *, _SLang_Token_Type *);
-   VOID_STAR blk_data;
-   unsigned char main_type;
-}
-Special_NameTable_Type;
-
-static int handle_special (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
-   (void) tok;
-   Compile_ByteCode_Ptr->bc_main_type = nt->main_type;
-   Compile_ByteCode_Ptr->b.ptr_blk = nt->blk_data;
-   return 0;
-}
-
-static int handle_special_file (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
-   char *name;
-
-   (void) nt; (void) tok;
-
-   if (This_Static_NameSpace == NULL) name = "***Unknown***";
-   else
-     name = This_Static_NameSpace->name;
-
-   name = SLang_create_slstring (name);
-   if (name == NULL)
-     return -1;
-
-   Compile_ByteCode_Ptr->b.s_blk = name;
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL_STR;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_STRING_TYPE;
-   return 0;
-}
-
-static int handle_special_line (Special_NameTable_Type *nt, _SLang_Token_Type *tok)
-{
-   (void) nt;
-
-#if _SLANG_HAS_DEBUG_CODE
-   Compile_ByteCode_Ptr->b.l_blk = (long) tok->line_number;
-#endif
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_UINT_TYPE;
-
-   return 0;
-}
-
-static Special_NameTable_Type Special_Name_Table [] =
-{
-     {"EXECUTE_ERROR_BLOCK", handle_special, NULL, _SLANG_BC_X_ERROR},
-     {"X_USER_BLOCK0", handle_special, NULL, _SLANG_BC_X_USER0},
-     {"X_USER_BLOCK1", handle_special, NULL, _SLANG_BC_X_USER1},
-     {"X_USER_BLOCK2", handle_special, NULL, _SLANG_BC_X_USER2},
-     {"X_USER_BLOCK3", handle_special, NULL, _SLANG_BC_X_USER3},
-     {"X_USER_BLOCK4", handle_special, NULL, _SLANG_BC_X_USER4},
-     {"__FILE__", handle_special_file, NULL, 0},
-     {"__LINE__", handle_special_line, NULL, 0},
-#if 0
-     {"__NAMESPACE__", handle_special_namespace, NULL, 0},
-#endif
-     {NULL, NULL, NULL, 0}
-};
-
-static void compile_hashed_identifier (char *name, unsigned long hash, _SLang_Token_Type *tok)
-{
-   SLang_Name_Type *entry;
-   unsigned char name_type;
-
-   entry = locate_hashed_name (name, hash);
-
-   if (entry == NULL)
-     {
-	Special_NameTable_Type *nt = Special_Name_Table;
-
-	while (nt->name != NULL)
-	  {
-	     if (strcmp (name, nt->name))
-	       {
-		  nt++;
-		  continue;
-	       }
-
-	     if (0 == (*nt->fun)(nt, tok))
-	       lang_try_now ();
-	     return;
-	  }
-
-	SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	return;
-     }
-
-   name_type = entry->name_type;
-   Compile_ByteCode_Ptr->bc_main_type = name_type;
-
-   if (name_type == SLANG_LVARIABLE)
-     Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) entry)->local_var_number;
-   else
-     Compile_ByteCode_Ptr->b.nt_blk = entry;
-
-   lang_try_now ();
-}
-
-static void compile_tmp_variable (char *name, unsigned long hash)
-{
-   SLang_Name_Type *entry;
-   unsigned char name_type;
-
-   if (NULL == (entry = locate_hashed_name (name, hash)))
-     {
-	SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	return;
-     }
-
-   name_type = entry->name_type;
-   switch (name_type)
-     {
-      case SLANG_LVARIABLE:
-	Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) entry)->local_var_number;
-	break;
-
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	Compile_ByteCode_Ptr->b.nt_blk = entry;
-	break;
-
-      default:
-	SLang_verror (SL_SYNTAX_ERROR, "__tmp(%s) does not specifiy a variable", name);
-	return;
-     }
-
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_TMP;
-   Compile_ByteCode_Ptr->bc_sub_type = name_type;
-
-   lang_try_now ();
-}
-
-static void compile_simple (unsigned char main_type)
-{
-   Compile_ByteCode_Ptr->bc_main_type = main_type;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-   Compile_ByteCode_Ptr->b.blk = NULL;
-   lang_try_now ();
-}
-
-static void compile_identifier (char *name, _SLang_Token_Type *tok)
-{
-   compile_hashed_identifier (name, _SLcompute_string_hash (name), tok);
-}
-
-static void compile_call_direct (int (*f) (void), unsigned char byte_code)
-{
-   Compile_ByteCode_Ptr->b.call_function = f;
-   Compile_ByteCode_Ptr->bc_main_type = byte_code;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-   lang_try_now ();
-}
-
-static void compile_lvar_call_direct (int (*f)(void), unsigned char bc,
-				      unsigned char frame_op)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (0 == try_compressed_bytecode (_SLANG_BC_LVARIABLE, bc))
-     return;
-#else
-   (void) bc;
-#endif
-
-   compile_call_direct (f, frame_op);
-}
-
-static void compile_integer (long i, unsigned char bc_main_type, unsigned char bc_sub_type)
-{
-   Compile_ByteCode_Ptr->b.l_blk = i;
-   Compile_ByteCode_Ptr->bc_main_type = bc_main_type;
-   Compile_ByteCode_Ptr->bc_sub_type = bc_sub_type;
-
-   lang_try_now ();
-}
-
-#if SLANG_HAS_FLOAT
-static void compile_double (char *str, unsigned char type)
-{
-   double d;
-   unsigned int factor = 1;
-   double *ptr;
-
-#if 1
-   d = _SLang_atof (str);
-#else
-   if (1 != sscanf (str, "%lf", &d))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Unable to convert %s to double", str);
-	return;
-     }
-#endif
-
-#if SLANG_HAS_COMPLEX
-   if (type == SLANG_COMPLEX_TYPE) factor = 2;
-#endif
-   if (NULL == (ptr = (double *) SLmalloc(factor * sizeof(double))))
-     return;
-
-   Compile_ByteCode_Ptr->b.double_blk = ptr;
-#if SLANG_HAS_COMPLEX
-   if (type == SLANG_COMPLEX_TYPE)
-     *ptr++ = 0;
-#endif
-   *ptr = d;
-
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
-   Compile_ByteCode_Ptr->bc_sub_type = type;
-   lang_try_now ();
-}
-
-static void compile_float (char *s)
-{
-   float x;
-
-#if 1
-   x = (float) _SLang_atof (s);
-#else
-   if (1 != sscanf (s, "%f", &x))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Unable to convert %s to float", s);
-	return;
-     }
-#endif
-   Compile_ByteCode_Ptr->b.float_blk = x;
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_FLOAT_TYPE;
-   lang_try_now ();
-}
-
-#endif
-
-static void compile_string (char *s, unsigned long hash)
-{
-   if (NULL == (Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string (s, hash)))
-     return;
-
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL_STR;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_STRING_TYPE;
-
-   lang_try_now ();
-}
-
-static void compile_bstring (SLang_BString_Type *s)
-{
-   if (NULL == (Compile_ByteCode_Ptr->b.bs_blk = SLbstring_dup (s)))
-     return;
-
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LITERAL;
-   Compile_ByteCode_Ptr->bc_sub_type = SLANG_BSTRING_TYPE;
-
-   lang_try_now ();
-}
-
-/* assign_type is one of _SLANG_BCST_ASSIGN, ... values */
-static void compile_assign (unsigned char assign_type,
-			    char *name, unsigned long hash)
-{
-   SLang_Name_Type *v;
-   unsigned char main_type;
-   SLang_Class_Type *cl;
-
-   v = locate_hashed_name (name, hash);
-   if (v == NULL)
-     {
-	if ((_SLang_Auto_Declare_Globals == 0)
-	    || (NULL != strchr (name, '-'))   /* namespace->name form */
-	    || Lang_Defining_Function
-	    || (assign_type != _SLANG_BCST_ASSIGN)
-	    || (This_Static_NameSpace == NULL))
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	     return;
-	  }
-	/* Note that function local variables are not at top level */
-
-	/* Variables that are automatically declared are given static
-	 * scope.
-	 */
-	if ((NULL != SLang_Auto_Declare_Var_Hook)
-	    && (-1 == (*SLang_Auto_Declare_Var_Hook) (name)))
-	  return;
-
-	if ((-1 == add_global_variable (name, SLANG_GVARIABLE, hash, This_Static_NameSpace))
-	    || (NULL == (v = locate_hashed_name (name, hash))))
-	  return;
-     }
-
-   switch (v->name_type)
-     {
-      case SLANG_LVARIABLE:
-	main_type = _SLANG_BC_SET_LOCAL_LVALUE;
-	Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) v)->local_var_number;
-	break;
-
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	main_type = _SLANG_BC_SET_GLOBAL_LVALUE;
-	Compile_ByteCode_Ptr->b.nt_blk = v;
-	break;
-
-      case SLANG_IVARIABLE:
-	cl = _SLclass_get_class (((SLang_Intrin_Var_Type *)v)->type);
-	if (cl->cl_class_type != SLANG_CLASS_TYPE_SCALAR)
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR, "Assignment to %s is not allowed", name);
-	     return;
-	  }
-	main_type = _SLANG_BC_SET_INTRIN_LVALUE;
-	Compile_ByteCode_Ptr->b.nt_blk = v;
-	break;
-
-      case SLANG_RVARIABLE:
-	SLang_verror (SL_READONLY_ERROR, "%s is read-only", name);
-	return;
-
-      default:
-	SLang_verror (SL_DUPLICATE_DEFINITION, "%s may not be used as an lvalue", name);
-	return;
-     }
-
-   Compile_ByteCode_Ptr->bc_sub_type = assign_type;
-   Compile_ByteCode_Ptr->bc_main_type = main_type;
-
-   lang_try_now ();
-}
-
-static void compile_deref_assign (char *name, unsigned long hash)
-{
-   SLang_Name_Type *v;
-
-   v = locate_hashed_name (name, hash);
-
-   if (v == NULL)
-     {
-	SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	return;
-     }
-
-   switch (v->name_type)
-     {
-      case SLANG_LVARIABLE:
-	Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *) v)->local_var_number;
-	break;
-
-      case SLANG_GVARIABLE:
-      case SLANG_PVARIABLE:
-	Compile_ByteCode_Ptr->b.nt_blk = v;
-	break;
-
-      default:
-	/* FIXME: Priority=low
-	 * This could be made to work.  It is not a priority because
-	 * I cannot imagine application intrinsics which are references.
-	 */
-	SLang_verror (SL_NOT_IMPLEMENTED, "Deref assignment to %s is not allowed", name);
-	return;
-     }
-
-   Compile_ByteCode_Ptr->bc_sub_type = v->name_type;
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_DEREF_ASSIGN;
-
-   lang_try_now ();
-}
-
-static void
-compile_struct_assign (_SLang_Token_Type *t)
-{
-   Compile_ByteCode_Ptr->bc_sub_type = _SLANG_BCST_ASSIGN + (t->type - _STRUCT_ASSIGN_TOKEN);
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_SET_STRUCT_LVALUE;
-   Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string (t->v.s_val, t->hash);
-   lang_try_now ();
-}
-
-static void
-compile_array_assign (_SLang_Token_Type *t)
-{
-   Compile_ByteCode_Ptr->bc_sub_type = _SLANG_BCST_ASSIGN + (t->type - _ARRAY_ASSIGN_TOKEN);
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_SET_ARRAY_LVALUE;
-   Compile_ByteCode_Ptr->b.s_blk = NULL;
-   lang_try_now ();
-}
-
-static void compile_dot(_SLang_Token_Type *t)
-{
-   Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_FIELD;
-   Compile_ByteCode_Ptr->b.s_blk = _SLstring_dup_hashed_string(t->v.s_val, t->hash);
-   lang_try_now ();
-}
-
-static void compile_ref (char *name, unsigned long hash)
-{
-   SLang_Name_Type *entry;
-   unsigned char main_type;
-
-   if (NULL == (entry = locate_hashed_name (name, hash)))
-     {
-	SLang_verror (SL_UNDEFINED_NAME, "%s is undefined", name);
-	return;
-     }
-
-   main_type = entry->name_type;
-
-   if (main_type == SLANG_LVARIABLE)
-     {
-	main_type = _SLANG_BC_LOBJPTR;
-	Compile_ByteCode_Ptr->b.i_blk = ((SLang_Local_Var_Type *)entry)->local_var_number;
-     }
-   else
-     {
-	main_type = _SLANG_BC_GOBJPTR;
-	Compile_ByteCode_Ptr->b.nt_blk = entry;
-     }
-
-   Compile_ByteCode_Ptr->bc_main_type = main_type;
-   lang_try_now ();
-}
-
-static void compile_break (unsigned char break_type,
-			   int requires_block, int requires_fun,
-			   char *str)
-{
-   if ((requires_fun
-	&& (Lang_Defining_Function == 0))
-       || (requires_block
-	   && (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "misplaced %s", str);
-	return;
-     }
-
-   Compile_ByteCode_Ptr->bc_main_type = break_type;
-   Compile_ByteCode_Ptr->bc_sub_type = 0;
-
-   lang_try_now ();
-}
-
-static void compile_public_variable_mode (_SLang_Token_Type *t)
-{
-   if (t->type == IDENT_TOKEN)
-     {
-	/* If the variable is already defined in the static hash table,
-	 * generate an error.
-	 */
-	if ((This_Static_NameSpace != NULL)
-	    && (NULL != locate_name_in_table (t->v.s_val, t->hash, This_Static_NameSpace->table, This_Static_NameSpace->table_size)))
-	  {
-	     SLang_verror (SL_DUPLICATE_DEFINITION,
-			   "%s already has static or private linkage in this unit",
-			   t->v.s_val);
-	     return;
-	  }
-	add_global_variable (t->v.s_val, SLANG_GVARIABLE, t->hash, Global_NameSpace);
-     }
-   else if (t->type == CBRACKET_TOKEN)
-     Compile_Mode_Function = compile_basic_token_mode;
-   else
-     SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_local_variable_mode (_SLang_Token_Type *t)
-{
-   if (t->type == IDENT_TOKEN)
-     add_local_variable (t->v.s_val, t->hash);
-   else if (t->type == CBRACKET_TOKEN)
-     Compile_Mode_Function = compile_basic_token_mode;
-   else
-     SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_static_variable_mode (_SLang_Token_Type *t)
-{
-   if (t->type == IDENT_TOKEN)
-     add_global_variable (t->v.s_val, SLANG_GVARIABLE, t->hash, This_Static_NameSpace);
-   else if (t->type == CBRACKET_TOKEN)
-     Compile_Mode_Function = compile_basic_token_mode;
-   else
-     SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_private_variable_mode (_SLang_Token_Type *t)
-{
-   if (t->type == IDENT_TOKEN)
-     add_global_variable (t->v.s_val, SLANG_PVARIABLE, t->hash, This_Static_NameSpace);
-   else if (t->type == CBRACKET_TOKEN)
-     Compile_Mode_Function = compile_basic_token_mode;
-   else
-     SLang_verror (SL_SYNTAX_ERROR, "Misplaced token in variable list");
-}
-
-static void compile_function_mode (_SLang_Token_Type *t)
-{
-   if (-1 == lang_check_space ())
-     return;
-
-   if (t->type != IDENT_TOKEN)
-     SLang_verror (SL_SYNTAX_ERROR, "Expecting function name");
-   else
-     lang_define_function (t->v.s_val, SLANG_FUNCTION, t->hash, Global_NameSpace);
-
-   Compile_Mode_Function = compile_basic_token_mode;
-}
-
-/* An error block is not permitted to contain continue or break statements.
- * This restriction may be removed later but for now reject them.
- */
-static int check_error_block (void)
-{
-   SLBlock_Type *p;
-   unsigned char t;
-
-   /* Back up to the block and then scan it. */
-   p = (Compile_ByteCode_Ptr - 1)->b.blk;
-
-   while (0 != (t = p->bc_main_type))
-     {
-	if ((t == _SLANG_BC_BREAK)
-	    || (t == _SLANG_BC_CONTINUE))
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR,
-			   "An ERROR_BLOCK is not permitted to contain continue or break statements");
-	     return -1;
-	  }
-	p++;
-     }
-   return 0;
-}
-
-/* The only allowed tokens are the directives and another block start.
- * The mode is only active if a block is available.  The inner_interp routine
- * expects such safety checks.
- */
-static void compile_directive_mode (_SLang_Token_Type *t)
-{
-   int bc_sub_type;
-
-   if (-1 == lang_check_space ())
-     return;
-
-   bc_sub_type = -1;
-
-   switch (t->type)
-     {
-      case FOREVER_TOKEN:
-	bc_sub_type = _SLANG_BCST_FOREVER;
-	break;
-
-      case IFNOT_TOKEN:
-	bc_sub_type = _SLANG_BCST_IFNOT;
-	break;
-
-      case IF_TOKEN:
-	bc_sub_type = _SLANG_BCST_IF;
-	break;
-
-      case ANDELSE_TOKEN:
-	bc_sub_type = _SLANG_BCST_ANDELSE;
-	break;
-
-      case SWITCH_TOKEN:
-	bc_sub_type = _SLANG_BCST_SWITCH;
-	break;
-
-      case EXITBLK_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR, "misplaced EXIT_BLOCK");
-	     break;
-	  }
-	bc_sub_type = _SLANG_BCST_EXIT_BLOCK;
-	break;
-
-      case ERRBLK_TOKEN:
-	if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR, "misplaced ERROR_BLOCK");
-	     break;
-	  }
-	if (0 == check_error_block ())
-	  bc_sub_type = _SLANG_BCST_ERROR_BLOCK;
-	break;
-
-      case USRBLK0_TOKEN:
-      case USRBLK1_TOKEN:
-      case USRBLK2_TOKEN:
-      case USRBLK3_TOKEN:
-      case USRBLK4_TOKEN:
-	if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_TOP_LEVEL)
-	  {
-	     SLang_verror (SL_SYNTAX_ERROR, "misplaced USER_BLOCK");
-	     break;
-	  }
-	bc_sub_type = _SLANG_BCST_USER_BLOCK0 + (t->type - USRBLK0_TOKEN);
-	break;
-
-      case NOTELSE_TOKEN:
-	bc_sub_type = _SLANG_BCST_NOTELSE;
-	break;
-
-      case ELSE_TOKEN:
-	bc_sub_type = _SLANG_BCST_ELSE;
-	break;
-
-      case LOOP_TOKEN:
-	bc_sub_type = _SLANG_BCST_LOOP;
-	break;
-
-      case DOWHILE_TOKEN:
-	bc_sub_type = _SLANG_BCST_DOWHILE;
-	break;
-
-      case WHILE_TOKEN:
-	bc_sub_type = _SLANG_BCST_WHILE;
-	break;
-
-      case ORELSE_TOKEN:
-	bc_sub_type = _SLANG_BCST_ORELSE;
-	break;
-
-      case _FOR_TOKEN:
-	bc_sub_type = _SLANG_BCST_FOR;
-	break;
-
-      case FOR_TOKEN:
-	bc_sub_type = _SLANG_BCST_CFOR;
-	break;
-
-      case FOREACH_TOKEN:
-	bc_sub_type = _SLANG_BCST_FOREACH;
-	break;
-
-      case OBRACE_TOKEN:
-	lang_begin_block ();
-	break;
-
-      default:
-	SLang_verror (SL_SYNTAX_ERROR, "Expecting directive token.  Found 0x%X", t->type);
-	break;
-     }
-
-   /* Reset this pointer first because compile_directive may cause a
-    * file to be loaded.
-    */
-   Compile_Mode_Function = compile_basic_token_mode;
-
-   if (bc_sub_type != -1)
-     compile_directive (bc_sub_type);
-}
-
-static unsigned int Assign_Mode_Type;
-static void compile_assign_mode (_SLang_Token_Type *t)
-{
-   if (t->type != IDENT_TOKEN)
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "Expecting identifier for assignment");
-	return;
-     }
-
-   compile_assign (Assign_Mode_Type, t->v.s_val, t->hash);
-   Compile_Mode_Function = compile_basic_token_mode;
-}
-
-static void compile_basic_token_mode (_SLang_Token_Type *t)
-{
-   if (-1 == lang_check_space ())
-     return;
-
-   switch (t->type)
-     {
-      case PUSH_TOKEN:
-      case NOP_TOKEN:
-      case EOF_TOKEN:
-      case READONLY_TOKEN:
-      case DO_TOKEN:
-      case VARIABLE_TOKEN:
-      case SEMICOLON_TOKEN:
-      default:
-	SLang_verror (SL_SYNTAX_ERROR, "Unknown or unsupported token type 0x%X", t->type);
-	break;
-
-      case DEREF_TOKEN:
-	compile_call_direct (dereference_object, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case STRUCT_TOKEN:
-	compile_call_direct (_SLstruct_define_struct, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case TYPEDEF_TOKEN:
-	compile_call_direct (_SLstruct_define_typedef, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case TMP_TOKEN:
-	compile_tmp_variable (t->v.s_val, t->hash);
-	break;
-
-      case DOT_TOKEN:		       /* X . field */
-	compile_dot (t);
-	break;
-
-      case COMMA_TOKEN:
-	break;			       /* do nothing */
-
-      case IDENT_TOKEN:
-	compile_hashed_identifier (t->v.s_val, t->hash, t);
-	break;
-
-      case _REF_TOKEN:
-	compile_ref (t->v.s_val, t->hash);
-	break;
-
-      case ARG_TOKEN:
-	compile_call_direct (SLang_start_arg_list, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case EARG_TOKEN:
-	compile_lvar_call_direct (SLang_end_arg_list, _SLANG_BC_EARG_LVARIABLE, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case COLON_TOKEN:
-	if (This_Compile_Block_Type == COMPILE_BLOCK_TYPE_BLOCK)
-	  compile_simple (_SLANG_BC_LABEL);
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case POP_TOKEN:
-	compile_call_direct (SLdo_pop, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case CASE_TOKEN:
-	if (This_Compile_Block_Type != COMPILE_BLOCK_TYPE_BLOCK)
-	  SLang_verror (SL_SYNTAX_ERROR, "Misplaced 'case'");
-	else
-	  compile_call_direct (case_function, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case CHAR_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_CHAR_TYPE);
-	break;
-      case SHORT_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_SHORT_TYPE);
-	break;
-      case INT_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL_INT, SLANG_INT_TYPE);
-	break;
-      case UCHAR_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_UCHAR_TYPE);
-	break;
-      case USHORT_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_USHORT_TYPE);
-	break;
-      case UINT_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL_INT, SLANG_UINT_TYPE);
-	break;
-      case LONG_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_LONG_TYPE);
-	break;
-      case ULONG_TOKEN:
-	compile_integer (t->v.long_val, _SLANG_BC_LITERAL, SLANG_ULONG_TYPE);
-	break;
-
-#if SLANG_HAS_FLOAT
-      case FLOAT_TOKEN:
-	compile_float (t->v.s_val);
-	break;
-
-      case DOUBLE_TOKEN:
-	compile_double (t->v.s_val, SLANG_DOUBLE_TYPE);
-	break;
-#endif
-#if SLANG_HAS_COMPLEX
-      case COMPLEX_TOKEN:
-	compile_double (t->v.s_val, SLANG_COMPLEX_TYPE);
-	break;
-#endif
-
-      case STRING_TOKEN:
-	compile_string (t->v.s_val, t->hash);
-	break;
-
-      case _BSTRING_TOKEN:
-	compile_bstring (SLbstring_create ((unsigned char *)t->v.s_val, (unsigned int) t->hash));
-	break;
-
-      case BSTRING_TOKEN:
-	compile_bstring (t->v.b_val);
-	break;
-
-      case _NULL_TOKEN:
-	compile_identifier ("NULL", t);
-	break;
-
-      case _INLINE_WILDCARD_ARRAY_TOKEN:
-	compile_call_direct (_SLarray_wildcard_array, _SLANG_BC_CALL_DIRECT);
-	break;
-
-      case _INLINE_ARRAY_TOKEN:
-	compile_call_direct (_SLarray_inline_array, _SLANG_BC_CALL_DIRECT_FRAME);
-	break;
-
-      case _INLINE_IMPLICIT_ARRAY_TOKEN:
-	compile_call_direct (_SLarray_inline_implicit_array, _SLANG_BC_CALL_DIRECT_FRAME);
-	break;
-
-      case ARRAY_TOKEN:
-	compile_lvar_call_direct (_SLarray_aget, _SLANG_BC_LVARIABLE_AGET, _SLANG_BC_CALL_DIRECT_FRAME);
-	break;
-
-	/* Note: I need to add the other _ARRAY assign tokens. */
-      case _ARRAY_PLUSEQS_TOKEN:
-      case _ARRAY_MINUSEQS_TOKEN:
-      case _ARRAY_TIMESEQS_TOKEN:
-      case _ARRAY_DIVEQS_TOKEN:
-      case _ARRAY_BOREQS_TOKEN:
-      case _ARRAY_BANDEQS_TOKEN:
-      case _ARRAY_POST_MINUSMINUS_TOKEN:
-      case _ARRAY_MINUSMINUS_TOKEN:
-      case _ARRAY_POST_PLUSPLUS_TOKEN:
-      case _ARRAY_PLUSPLUS_TOKEN:
-	compile_array_assign (t);
-	break;
-
-      case _ARRAY_ASSIGN_TOKEN:
-	compile_lvar_call_direct (_SLarray_aput, _SLANG_BC_LVARIABLE_APUT, _SLANG_BC_CALL_DIRECT_FRAME);
-	break;
-
-      case _STRUCT_ASSIGN_TOKEN:
-      case _STRUCT_PLUSEQS_TOKEN:
-      case _STRUCT_MINUSEQS_TOKEN:
-      case _STRUCT_TIMESEQS_TOKEN:
-      case _STRUCT_DIVEQS_TOKEN:
-      case _STRUCT_BOREQS_TOKEN:
-      case _STRUCT_BANDEQS_TOKEN:
-      case _STRUCT_POST_MINUSMINUS_TOKEN:
-      case _STRUCT_MINUSMINUS_TOKEN:
-      case _STRUCT_POST_PLUSPLUS_TOKEN:
-      case _STRUCT_PLUSPLUS_TOKEN:
-	compile_struct_assign (t);
-	break;
-
-      case _SCALAR_ASSIGN_TOKEN:
-      case _SCALAR_PLUSEQS_TOKEN:
-      case _SCALAR_MINUSEQS_TOKEN:
-      case _SCALAR_TIMESEQS_TOKEN:
-      case _SCALAR_DIVEQS_TOKEN:
-      case _SCALAR_BOREQS_TOKEN:
-      case _SCALAR_BANDEQS_TOKEN:
-      case _SCALAR_POST_MINUSMINUS_TOKEN:
-      case _SCALAR_MINUSMINUS_TOKEN:
-      case _SCALAR_POST_PLUSPLUS_TOKEN:
-      case _SCALAR_PLUSPLUS_TOKEN:
-	compile_assign (_SLANG_BCST_ASSIGN + (t->type - _SCALAR_ASSIGN_TOKEN),
-			t->v.s_val, t->hash);
-	break;
-
-      case _DEREF_ASSIGN_TOKEN:
-	compile_deref_assign (t->v.s_val, t->hash);
-	break;
-
- 	/* For processing RPN tokens */
-      case ASSIGN_TOKEN:
-      case PLUSEQS_TOKEN:
-      case MINUSEQS_TOKEN:
-      case TIMESEQS_TOKEN:
-      case DIVEQS_TOKEN:
-      case BOREQS_TOKEN:
-      case BANDEQS_TOKEN:
-      case POST_MINUSMINUS_TOKEN:
-      case MINUSMINUS_TOKEN:
-      case POST_PLUSPLUS_TOKEN:
-      case PLUSPLUS_TOKEN:
-	Compile_Mode_Function = compile_assign_mode;
-	Assign_Mode_Type = _SLANG_BCST_ASSIGN + (t->type - ASSIGN_TOKEN);
-	break;
-
-      case LT_TOKEN:
-	compile_binary (SLANG_LT);
-	break;
-
-      case LE_TOKEN:
-	compile_binary (SLANG_LE);
-	break;
-
-      case GT_TOKEN:
-	compile_binary (SLANG_GT);
-	break;
-
-      case GE_TOKEN:
-	compile_binary (SLANG_GE);
-	break;
-
-      case EQ_TOKEN:
-	compile_binary (SLANG_EQ);
-	break;
-
-      case NE_TOKEN:
-	compile_binary (SLANG_NE);
-	break;
-
-      case AND_TOKEN:
-	compile_binary (SLANG_AND);
-	break;
-
-      case ADD_TOKEN:
-	compile_fast_binary (SLANG_PLUS, _SLANG_BC_INTEGER_PLUS);
-	break;
-
-      case SUB_TOKEN:
-	compile_fast_binary (SLANG_MINUS, _SLANG_BC_INTEGER_MINUS);
-	break;
-
-      case TIMES_TOKEN:
-	compile_binary (SLANG_TIMES);
-	break;
-
-      case DIV_TOKEN:
-	compile_binary (SLANG_DIVIDE);
-	break;
-
-      case POW_TOKEN:
-	compile_binary (SLANG_POW);
-	break;
-
-      case BXOR_TOKEN:
-	compile_binary (SLANG_BXOR);
-	break;
-
-      case BAND_TOKEN:
-	compile_binary (SLANG_BAND);
-	break;
-
-      case BOR_TOKEN:
-	compile_binary (SLANG_BOR);
-	break;
-
-      case SHR_TOKEN:
-	compile_binary (SLANG_SHR);
-	break;
-
-      case SHL_TOKEN:
-	compile_binary (SLANG_SHL);
-	break;
-
-      case MOD_TOKEN:
-	compile_binary (SLANG_MOD);
-	break;
-
-      case OR_TOKEN:
-	compile_binary (SLANG_OR);
-	break;
-
-      case NOT_TOKEN:
-	compile_unary (SLANG_NOT, _SLANG_BC_UNARY);
-	break;
-
-      case BNOT_TOKEN:
-	compile_unary (SLANG_BNOT, _SLANG_BC_UNARY);
-	break;
-
-      case MUL2_TOKEN:
-	compile_unary (SLANG_MUL2, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case CHS_TOKEN:
-	compile_unary (SLANG_CHS, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case ABS_TOKEN:
-	compile_unary (SLANG_ABS, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case SQR_TOKEN:
-	compile_unary (SLANG_SQR, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case SIGN_TOKEN:
-	compile_unary (SLANG_SIGN, _SLANG_BC_UNARY_FUNC);
-	break;
-
-      case BREAK_TOKEN:
-	compile_break (_SLANG_BC_BREAK, 1, 0, "break");
-	break;
-
-      case RETURN_TOKEN:
-	compile_break (_SLANG_BC_RETURN, 0, 1, "return");
-	break;
-
-      case CONT_TOKEN:
-	compile_break (_SLANG_BC_CONTINUE, 1, 0, "continue");
-	break;
-
-      case EXCH_TOKEN:
-	compile_break (_SLANG_BC_EXCH, 0, 0, "");   /* FIXME: Priority=low */
-	break;
-
-      case STATIC_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  Compile_Mode_Function = compile_static_variable_mode;
-	else
-	  SLang_verror (SL_NOT_IMPLEMENTED, "static variables not permitted in functions");
-	break;
-
-      case PRIVATE_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  Compile_Mode_Function = compile_private_variable_mode;
-	else
-	  SLang_verror (SL_NOT_IMPLEMENTED, "private variables not permitted in functions");
-	break;
-
-      case PUBLIC_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  Compile_Mode_Function = compile_public_variable_mode;
-	else
-	  SLang_verror (SL_NOT_IMPLEMENTED, "public variables not permitted in functions");
-	break;
-
-      case OBRACKET_TOKEN:
-	if (Lang_Defining_Function == 0)
-	  Compile_Mode_Function = Default_Variable_Mode;
-	else
-	  Compile_Mode_Function = compile_local_variable_mode;
-	break;
-
-      case OPAREN_TOKEN:
-	lang_begin_function ();
-	break;
-
-      case DEFINE_STATIC_TOKEN:
-	if (Lang_Defining_Function)
-	  define_static_function (t->v.s_val, t->hash);
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case DEFINE_PRIVATE_TOKEN:
-	if (Lang_Defining_Function)
-	  define_private_function (t->v.s_val, t->hash);
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case DEFINE_PUBLIC_TOKEN:
-	if (Lang_Defining_Function)
-	  define_public_function (t->v.s_val, t->hash);
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case DEFINE_TOKEN:
-	if (Lang_Defining_Function)
-	  (*Default_Define_Function) (t->v.s_val, t->hash);
-	else
-	  SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case CPAREN_TOKEN:
-	if (Lang_Defining_Function)
-	  Compile_Mode_Function = compile_function_mode;
-	else SLang_Error = SL_SYNTAX_ERROR;
-	break;
-
-      case CBRACE_TOKEN:
-	lang_end_block ();
-	Compile_Mode_Function = compile_directive_mode;
-	break;
-
-      case OBRACE_TOKEN:
-	lang_begin_block ();
-	break;
-
-      case FARG_TOKEN:
-	Function_Args_Number = Local_Variable_Number;
-	break;
-
-#if _SLANG_HAS_DEBUG_CODE
-      case LINE_NUM_TOKEN:
-	Compile_ByteCode_Ptr->bc_main_type = _SLANG_BC_LINE_NUM;
-	Compile_ByteCode_Ptr->b.l_blk = t->v.long_val;
-	lang_try_now ();
-	break;
-#endif
-      case POUND_TOKEN:
-	compile_call_direct (_SLarray_matrix_multiply, _SLANG_BC_CALL_DIRECT);
-	break;
-     }
-}
-
-void _SLcompile (_SLang_Token_Type *t)
-{
-   if (SLang_Error == 0)
-     {
-	if (Compile_Mode_Function != compile_basic_token_mode)
-	  {
-	     if (Compile_Mode_Function == NULL)
-	       Compile_Mode_Function = compile_basic_token_mode;
-#if _SLANG_HAS_DEBUG_CODE
-	     if (t->type == LINE_NUM_TOKEN)
-	       {
-		  compile_basic_token_mode (t);
-		  return;
-	       }
-#endif
-	  }
-
-	(*Compile_Mode_Function) (t);
-     }
-
-   if (SLang_Error)
-     {
-	Compile_Mode_Function = compile_basic_token_mode;
-	SLang_restart (0);
-     }
-}
-
-void (*_SLcompile_ptr)(_SLang_Token_Type *) = _SLcompile;
-
-typedef struct _Compile_Context_Type
-{
-   struct _Compile_Context_Type *next;
-   SLang_NameSpace_Type *static_namespace;
-   void (*compile_variable_mode) (_SLang_Token_Type *);
-   void (*define_function) (char *, unsigned long);
-   int lang_defining_function;
-   int local_variable_number;
-   unsigned int function_args_number;
-   SLang_Name_Type **locals_hash_table;
-   void (*compile_mode_function)(_SLang_Token_Type *);
-#if _SLANG_HAS_DEBUG_CODE
-   char *compile_filename;
-#endif
-}
-Compile_Context_Type;
-
-static Compile_Context_Type *Compile_Context_Stack;
-
-/* The only way the push/pop_context functions can get called is via
- * an eval type function.  That can only happen when executed from a
- * top level block.  This means that Compile_ByteCode_Ptr can always be
- * rest back to the beginning of a block.
- */
-
-static int pop_compile_context (void)
-{
-   Compile_Context_Type *cc;
-
-   if (NULL == (cc = Compile_Context_Stack))
-     return -1;
-
-   This_Static_NameSpace = cc->static_namespace;
-   Compile_Context_Stack = cc->next;
-   Default_Variable_Mode = cc->compile_variable_mode;
-   Default_Define_Function = cc->define_function;
-   Compile_Mode_Function = cc->compile_mode_function;
-
-   Lang_Defining_Function = cc->lang_defining_function;
-   Local_Variable_Number = cc->local_variable_number;
-   Function_Args_Number = cc->function_args_number;
-
-#if _SLANG_HAS_DEBUG_CODE
-   SLang_free_slstring (This_Compile_Filename);
-   This_Compile_Filename = cc->compile_filename;
-#endif
-
-   SLfree ((char *) Locals_Hash_Table);
-   Locals_Hash_Table = cc->locals_hash_table;
-
-   SLfree ((char *) cc);
-
-   return 0;
-}
-
-static int push_compile_context (char *name)
-{
-   Compile_Context_Type *cc;
-   SLang_Name_Type **lns;
-
-   cc = (Compile_Context_Type *)SLmalloc (sizeof (Compile_Context_Type));
-   if (cc == NULL)
-     return -1;
-   memset ((char *) cc, 0, sizeof (Compile_Context_Type));
-
-   lns = (SLang_Name_Type **) SLcalloc (sizeof (SLang_Name_Type *), SLLOCALS_HASH_TABLE_SIZE);
-   if (lns == NULL)
-     {
-	SLfree ((char *) cc);
-	return -1;
-     }
-
-#if _SLANG_HAS_DEBUG_CODE
-   if ((name != NULL)
-       && (NULL == (name = SLang_create_slstring (name))))
-     {
-	SLfree ((char *) cc);
-	SLfree ((char *) lns);
-	return -1;
-     }
-		
-   cc->compile_filename = This_Compile_Filename;
-   This_Compile_Filename = name;
-#endif
-
-   cc->static_namespace = This_Static_NameSpace;
-   cc->compile_variable_mode = Default_Variable_Mode;
-   cc->define_function = Default_Define_Function;
-   cc->locals_hash_table = Locals_Hash_Table;
-
-   cc->lang_defining_function = Lang_Defining_Function;
-   cc->local_variable_number = Local_Variable_Number;
-   cc->function_args_number = Function_Args_Number;
-   cc->locals_hash_table = Locals_Hash_Table;
-   cc->compile_mode_function = Compile_Mode_Function;
-
-   cc->next = Compile_Context_Stack;
-   Compile_Context_Stack = cc;
-
-   Compile_Mode_Function = compile_basic_token_mode;
-   Default_Variable_Mode = compile_public_variable_mode;
-   Default_Define_Function = define_public_function;
-   Lang_Defining_Function = 0;
-   Local_Variable_Number = 0;
-   Function_Args_Number = 0;
-   Locals_Hash_Table = lns;
-   return 0;
-}
-
-static int init_interpreter (void)
-{
-   SLang_NameSpace_Type *ns;
-
-   if (Global_NameSpace != NULL)
-     return 0;
-
-   if (NULL == (ns = _SLns_allocate_namespace ("***GLOBAL***", SLGLOBALS_HASH_TABLE_SIZE)))
-     return -1;
-   if (-1 == _SLns_set_namespace_name (ns, "Global"))
-     return -1;
-   Global_NameSpace = ns;
-
-   _SLRun_Stack = (SLang_Object_Type *) SLcalloc (SLANG_MAX_STACK_LEN,
-						  sizeof (SLang_Object_Type));
-   if (_SLRun_Stack == NULL)
-     return -1;
-
-   _SLStack_Pointer = _SLRun_Stack;
-   _SLStack_Pointer_Max = _SLRun_Stack + SLANG_MAX_STACK_LEN;
-
-   SLShort_Blocks[0].bc_main_type = _SLANG_BC_RETURN;
-   SLShort_Blocks[2].bc_main_type = _SLANG_BC_BREAK;
-   SLShort_Blocks[4].bc_main_type = _SLANG_BC_CONTINUE;
-
-   Num_Args_Stack = (int *) SLmalloc (sizeof (int) * SLANG_MAX_RECURSIVE_DEPTH);
-   if (Num_Args_Stack == NULL)
-     {
-	SLfree ((char *) _SLRun_Stack);
-	return -1;
-     }
-   Recursion_Depth = 0;
-   Frame_Pointer_Stack = (unsigned int *) SLmalloc (sizeof (unsigned int) * SLANG_MAX_RECURSIVE_DEPTH);
-   if (Frame_Pointer_Stack == NULL)
-     {
-	SLfree ((char *) _SLRun_Stack);
-	SLfree ((char *)Num_Args_Stack);
-	return -1;
-     }
-   Frame_Pointer_Depth = 0;
-   Frame_Pointer = _SLRun_Stack;
-
-   Default_Variable_Mode = compile_public_variable_mode;
-   Default_Define_Function = define_public_function;
-   return 0;
-}
-
-static int add_generic_table (SLang_NameSpace_Type *ns,
-			      SLang_Name_Type *table, char *pp_name,
-			      unsigned int entry_len)
-{
-   SLang_Name_Type *t, **ns_table;
-   char *name;
-   unsigned int table_size;
-   
-   if (-1 == init_interpreter ())
-     return -1;
-   
-   if (ns == NULL) 
-     ns = Global_NameSpace;
-   
-   ns_table = ns->table;
-   table_size = ns->table_size;
-	
-   if ((pp_name != NULL)
-       && (-1 == SLdefine_for_ifdef (pp_name)))
-     return -1;
-
-   t = table;
-   while (NULL != (name = t->name))
-     {
-	unsigned long hash;
-
-	/* Backward compatibility: '.' WAS used as hash marker */
-	if (*name == '.')
-	  {
-	     name++;
-	     t->name = name;
-	  }
-
-	if (NULL == (name = SLang_create_slstring (name)))
-	  return -1;
-
-	t->name = name;
-
-	hash = _SLcompute_string_hash (name);
-	hash = hash % table_size;
-
-	t->next = ns_table [(unsigned int) hash];
-	ns_table [(unsigned int) hash] = t;
-
-	t = (SLang_Name_Type *) ((char *)t + entry_len);
-     }
-
-   return 0;
-}
-
-int SLadd_intrin_fun_table (SLang_Intrin_Fun_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Fun_Type));
-}
-
-int SLadd_intrin_var_table (SLang_Intrin_Var_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Var_Type));
-}
-
-int SLadd_app_unary_table (SLang_App_Unary_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_App_Unary_Type));
-}
-
-int SLadd_math_unary_table (SLang_Math_Unary_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Math_Unary_Type));
-}
-
-int SLadd_iconstant_table (SLang_IConstant_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_IConstant_Type));
-}
-
-#if SLANG_HAS_FLOAT
-int SLadd_dconstant_table (SLang_DConstant_Type *tbl, char *pp)
-{
-   return add_generic_table (NULL, (SLang_Name_Type *) tbl, pp, sizeof (SLang_DConstant_Type));
-}
-#endif
-
-/* ----------- */
-int SLns_add_intrin_fun_table (SLang_NameSpace_Type *ns, SLang_Intrin_Fun_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Fun_Type));
-}
-
-int SLns_add_intrin_var_table (SLang_NameSpace_Type *ns, SLang_Intrin_Var_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Intrin_Var_Type));
-}
-
-int SLns_add_app_unary_table (SLang_NameSpace_Type *ns, SLang_App_Unary_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_App_Unary_Type));
-}
-
-int SLns_add_math_unary_table (SLang_NameSpace_Type *ns, SLang_Math_Unary_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_Math_Unary_Type));
-}
-
-int SLns_add_iconstant_table (SLang_NameSpace_Type *ns, SLang_IConstant_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_IConstant_Type));
-}
-
-#if SLANG_HAS_FLOAT
-int SLns_add_dconstant_table (SLang_NameSpace_Type *ns, SLang_DConstant_Type *tbl, char *pp)
-{
-   return add_generic_table (ns, (SLang_Name_Type *) tbl, pp, sizeof (SLang_DConstant_Type));
-}
-#endif
-
-/* what is a bitmapped value:
- * 1 intrin fun
- * 2 user fun
- * 4 intrin var
- * 8 user defined var
- */
-SLang_Array_Type *_SLang_apropos (char *namespace_name, char *pat, unsigned int what)
-{
-   SLang_NameSpace_Type *ns;
-
-   if (namespace_name == NULL)
-     namespace_name = "Global";
-
-   if (*namespace_name == 0)
-     ns = This_Static_NameSpace;
-   else ns = _SLns_find_namespace (namespace_name);
-
-   return _SLnspace_apropos (ns, pat, what);
-}
-
-void _SLang_implements_intrinsic (char *name)
-{
-   if (This_Static_NameSpace == NULL)
-     {
-	SLang_verror (SL_INTRINSIC_ERROR, "No namespace available");
-	return;
-     }
-
-   (void) _SLns_set_namespace_name (This_Static_NameSpace, name);
-
-   Default_Define_Function = define_static_function;
-   Default_Variable_Mode = compile_static_variable_mode;
-}
-
-void _SLang_use_namespace_intrinsic (char *name)
-{
-   SLang_NameSpace_Type *ns;
-   
-   if (NULL == (ns = _SLns_find_namespace (name)))
-     {
-	SLang_verror (SL_INTRINSIC_ERROR, "Namespace %s does not exist", name);
-	return;
-     }
-   This_Static_NameSpace = ns;
-   if (Global_NameSpace == ns)
-     {
-	Default_Define_Function = define_public_function;
-	Default_Variable_Mode = compile_public_variable_mode;
-     }
-   else
-     {
-	Default_Define_Function = define_static_function;
-	Default_Variable_Mode = compile_static_variable_mode;
-     }
-}
-
-
-char *_SLang_cur_namespace_intrinsic (void)
-{
-   if (This_Static_NameSpace == NULL)
-     return "Global";
-
-   if (This_Static_NameSpace->namespace_name == NULL)
-     return "";
-   
-   return This_Static_NameSpace->namespace_name;
-}
diff --git a/mdk-stage1/slang/slang.h b/mdk-stage1/slang/slang.h
deleted file mode 100644
index 900b14043..000000000
--- a/mdk-stage1/slang/slang.h
+++ /dev/null
@@ -1,1930 +0,0 @@
-#ifndef DAVIS_SLANG_H_
-#define DAVIS_SLANG_H_
-/* -*- mode: C; mode: fold; -*- */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#define SLANG_VERSION 10404
-#define SLANG_VERSION_STRING "1.4.4"
-
-/*{{{ System Dependent Macros and Typedefs */
-
-#if defined(__WATCOMC__) && defined(DOS)
-# ifndef __MSDOS__
-#  define __MSDOS__
-# endif
-# ifndef  DOS386
-#  define  DOS386
-# endif
-# ifndef IBMPC_SYSTEM
-#  define IBMPC_SYSTEM
-# endif
-#endif /* __watcomc__ */
-
-#if defined(unix) || defined(__unix)
-# ifndef __unix__
-#  define __unix__ 1
-# endif
-#endif
-
-#if !defined(__GO32__)
-# ifdef __unix__
-#  define REAL_UNIX_SYSTEM
-# endif
-#endif
-
-/* Set of the various defines for pc systems.  This includes OS/2 */
-#ifdef __GO32__
-# ifndef __DJGPP__
-#  define __DJGPP__ 1
-# endif
-# ifndef IBMPC_SYSTEM
-#   define IBMPC_SYSTEM
-# endif
-#endif
-
-#ifdef __BORLANDC__
-# ifndef IBMPC_SYSTEM
-#  define IBMPC_SYSTEM
-# endif
-#endif
-
-#ifdef __MSDOS__
-# ifndef IBMPC_SYSTEM
-#   define IBMPC_SYSTEM
-# endif
-#endif
-
-#if defined(OS2) || defined(__os2__)
-# ifndef IBMPC_SYSTEM
-#   define IBMPC_SYSTEM
-# endif
-# ifndef __os2__
-#  define __os2__
-# endif
-#endif
-
-#if defined(__NT__) || defined(__MINGW32__) || defined(__CYGWIN32__)
-# ifndef IBMPC_SYSTEM
-#  define IBMPC_SYSTEM
-# endif
-#endif
-
-#if defined(IBMPC_SYSTEM) || defined(VMS)
-# ifdef REAL_UNIX_SYSTEM
-#  undef REAL_UNIX_SYSTEM
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-#if 0
-}
-#endif
-
-#include <stdio.h>
-#include <stdarg.h>
-#if defined(__STDC__) || defined(__BORLANDC__) || defined(__cplusplus)
-# include <stddef.h>		       /* for offsetof */
-#endif
-
-/* ---------------------------- Generic Macros ----------------------------- */
-
-/*  __SC__ is defined for Symantec C++
-   DOS386 is defined for -mx memory model, 32 bit DOS extender. */
-
-#if defined(__SC__) && !defined(DOS386)
-# include <dos.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <alloc.h>
-#endif
-
-#if defined (__cplusplus) || defined(__STDC__) || defined(IBMPC_SYSTEM)
-  typedef void *VOID_STAR;
-#else
-  typedef unsigned char *VOID_STAR;
-#endif
-
-typedef int (*FVOID_STAR)(void);
-
-#if defined(__MSDOS_) && defined(__BORLANDC__)
-# define SLFREE(buf)  farfree((void far *)(buf))
-# define SLMALLOC(x) farmalloc((unsigned long) (x))
-# define SLREALLOC(buf, n) farrealloc((void far *) (buf), (unsigned long) (n))
-# define SLCALLOC(n, m) farcalloc((unsigned long) (n), (unsigned long) (m))
-#else
-# if defined(VMS) && !defined(__DECC)
-#  define SLFREE VAXC$FREE_OPT
-#  define SLMALLOC VAXC$MALLOC_OPT
-#  define SLREALLOC VAXC$REALLOC_OPT
-#  define SLCALLOC VAXC$CALLOC_OPT
-# else
-#  define SLFREE(x) free((char *)(x))
-#  define SLMALLOC malloc
-#  define SLREALLOC realloc
-#  define SLCALLOC calloc
-# endif
-#endif
-
-   extern char *SLdebug_malloc (unsigned long);
-   extern char *SLdebug_calloc (unsigned long, unsigned long);
-   extern char *SLdebug_realloc (char *, unsigned long);
-   extern void SLdebug_free (char *);
-   extern void SLmalloc_dump_statistics (void);
-   extern char *SLstrcpy(register char *, register char *);
-   extern int SLstrcmp(register char *, register char *);
-   extern char *SLstrncpy(char *, register char *, register  int);
-
-   extern void SLmemset (char *, char, int);
-   extern char *SLmemchr (register char *, register char, register int);
-   extern char *SLmemcpy (char *, char *, int);
-   extern int SLmemcmp (char *, char *, int);
-
-/*}}}*/
-
-/*{{{ Interpreter Typedefs */
-
-typedef struct _SLang_Name_Type
-{
-   char *name;
-   struct _SLang_Name_Type *next;
-   char name_type;
-   /* These values must be less than 0x10 because they map directly
-    * to byte codes.  See _slang.h.
-    */
-#define SLANG_LVARIABLE		0x01
-#define SLANG_GVARIABLE 	0x02
-#define SLANG_IVARIABLE 	0x03           /* intrinsic variables */
-   /* Note!!! For Macro MAKE_VARIABLE below to work, SLANG_IVARIABLE Must
-    be 1 less than SLANG_RVARIABLE!!! */
-#define SLANG_RVARIABLE		0x04	       /* read only variable */
-#define SLANG_INTRINSIC 	0x05
-#define SLANG_FUNCTION  	0x06
-#define SLANG_MATH_UNARY  	0x07
-#define SLANG_APP_UNARY  	0x08
-#define SLANG_ICONSTANT		0x09
-#define SLANG_DCONSTANT		0x0A
-#define SLANG_PVARIABLE		0x0B   /* private */
-#define SLANG_PFUNCTION		0x0C   /* private */
-
-   /* Rest of fields depend on name type */
-}
-SLang_Name_Type;
-
-typedef struct
-{
-   char *name;
-   struct _SLang_Name_Type *next;      /* this is for the hash table */
-   char name_type;
-
-   FVOID_STAR i_fun;		       /* address of object */
-
-   /* Do not change this without modifying slang.c:execute_intrinsic_fun */
-#define SLANG_MAX_INTRIN_ARGS	7
-   unsigned char arg_types [SLANG_MAX_INTRIN_ARGS];
-   unsigned char num_args;
-   unsigned char return_type;
-}
-SLang_Intrin_Fun_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   VOID_STAR addr;
-   unsigned char type;
-}
-SLang_Intrin_Var_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   int unary_op;
-}
-SLang_App_Unary_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-
-   int unary_op;
-}
-SLang_Math_Unary_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-   int i;
-}
-SLang_IConstant_Type;
-
-typedef struct
-{
-   char *name;
-   SLang_Name_Type *next;
-   char name_type;
-   double d;
-}
-SLang_DConstant_Type;
-
-typedef struct
-{
-   char *field_name;
-   unsigned int offset;
-   unsigned char type;
-   unsigned char read_only;
-}
-SLang_IStruct_Field_Type;
-
-extern int SLadd_intrin_fun_table (SLang_Intrin_Fun_Type *, char *);
-extern int SLadd_intrin_var_table (SLang_Intrin_Var_Type *, char *);
-extern int SLadd_app_unary_table (SLang_App_Unary_Type *, char *);
-extern int SLadd_math_unary_table (SLang_Math_Unary_Type *, char *);
-extern int SLadd_iconstant_table (SLang_IConstant_Type *, char *);
-extern int SLadd_dconstant_table (SLang_DConstant_Type *, char *);
-extern int SLadd_istruct_table (SLang_IStruct_Field_Type *, VOID_STAR, char *);
-
-typedef struct _SLang_NameSpace_Type SLang_NameSpace_Type;
-
-extern int SLns_add_intrin_fun_table (SLang_NameSpace_Type *, SLang_Intrin_Fun_Type *, char *);
-extern int SLns_add_intrin_var_table (SLang_NameSpace_Type *, SLang_Intrin_Var_Type *, char *);
-extern int SLns_add_app_unary_table (SLang_NameSpace_Type *, SLang_App_Unary_Type *, char *);
-extern int SLns_add_math_unary_table (SLang_NameSpace_Type *, SLang_Math_Unary_Type *, char *);
-extern int SLns_add_iconstant_table (SLang_NameSpace_Type *, SLang_IConstant_Type *, char *);
-extern int SLns_add_dconstant_table (SLang_NameSpace_Type *, SLang_DConstant_Type *, char *);
-extern int SLns_add_istruct_table (SLang_NameSpace_Type *, SLang_IStruct_Field_Type *, VOID_STAR, char *);
-
-extern SLang_NameSpace_Type *SLns_create_namespace (char *);
-extern void SLns_delete_namespace (SLang_NameSpace_Type *);
-
-typedef struct SLang_Load_Type
-{
-   int type;
-
-   VOID_STAR client_data;
-   /* Pointer to data that client needs for loading */
-
-   int auto_declare_globals;
-   /* if non-zero, undefined global variables are declared as static */
-
-   char *(*read)(struct SLang_Load_Type *);
-   /* function to call to read next line from obj. */
-
-   unsigned int line_num;
-   /* Number of lines read, used for error reporting */
-
-   int parse_level;
-   /* 0 if at top level of parsing */
-
-   char *name;
-   /* Name of this object, e.g., filename.  This name should be unique because
-    * it alone determines the name space for static objects associated with
-    * the compilable unit.
-    */
-
-   unsigned long reserved[4];
-   /* For future expansion */
-} SLang_Load_Type;
-
-extern SLang_Load_Type *SLallocate_load_type (char *);
-extern void SLdeallocate_load_type (SLang_Load_Type *);
-
-/* Returns SLang_Error upon failure */
-extern int SLang_load_object (SLang_Load_Type *);
-extern int (*SLang_Load_File_Hook)(char *);
-extern int (*SLang_Auto_Declare_Var_Hook) (char *);
-
-extern int SLang_generate_debug_info (int);
-
-
-#if defined(ultrix) && !defined(__GNUC__)
-# ifndef NO_PROTOTYPES
-#  define NO_PROTOTYPES
-# endif
-#endif
-
-#ifndef NO_PROTOTYPES
-# define _PROTO(x) x
-#else
-# define _PROTO(x) ()
-#endif
-
-typedef struct SL_OOBinary_Type
-{
-   unsigned char data_type;	       /* partner type for binary op */
-
-    int (*binary_function)_PROTO((int,
-				 unsigned char, VOID_STAR, unsigned int,
-				 unsigned char, VOID_STAR, unsigned int,
-				 VOID_STAR));
-
-   int (*binary_result) _PROTO((int, unsigned char, unsigned char, unsigned char *));
-   struct SL_OOBinary_Type *next;
-}
-SL_OOBinary_Type;
-
-typedef struct _SL_Typecast_Type
-{
-   unsigned char data_type;	       /* to_type */
-   int allow_implicit;
-
-   int (*typecast)_PROTO((unsigned char, VOID_STAR, unsigned int,
-			  unsigned char, VOID_STAR));
-   struct _SL_Typecast_Type *next;
-}
-SL_Typecast_Type;
-
-typedef struct _SLang_Struct_Type SLang_Struct_Type;
-
-#if defined(SL_APP_WANTS_FOREACH)
-/* It is up to the application to define struct _SLang_Foreach_Context_Type */
-typedef struct _SLang_Foreach_Context_Type SLang_Foreach_Context_Type;
-#else
-typedef int SLang_Foreach_Context_Type;
-#endif
-
-typedef struct
-{
-   unsigned char cl_class_type;
-#define SLANG_CLASS_TYPE_MMT		0
-#define SLANG_CLASS_TYPE_SCALAR		1
-#define SLANG_CLASS_TYPE_VECTOR		2
-#define SLANG_CLASS_TYPE_PTR		3
-
-   unsigned int cl_data_type;	       /* SLANG_INTEGER_TYPE, etc... */
-   char *cl_name;			       /* slstring type */
-
-   unsigned int cl_sizeof_type;
-   VOID_STAR cl_transfer_buf;	       /* cl_sizeof_type bytes*/
-
-   /* Methods */
-
-   /* Most of the method functions are prototyped:
-    * int method (unsigned char type, VOID_STAR addr);
-    * Here, @type@ represents the type of object that the method is asked
-    * to deal with.  The second parameter @addr@ will contain the ADDRESS of
-    * the object.  For example, if type is SLANG_INT_TYPE, then @addr@ will
-    * actually be int *.  Similary, if type is SLANG_STRING_TYPE,
-    * then @addr@ will contain the address of the string, i.e., char **.
-    */
-
-   void (*cl_destroy)_PROTO((unsigned char, VOID_STAR));
-   /* Prototype: void destroy(unsigned type, VOID_STAR val)
-    * Called to delete/free the object */
-
-   char *(*cl_string)_PROTO((unsigned char, VOID_STAR));
-   /* Prototype: char *to_string (unsigned char t, VOID_STAR p);
-    * Here p is a pointer to the object for which a string representation
-    * is to be returned.  The returned pointer is to be a MALLOCED string.
-    */
-
-   /* Prototype: void push(unsigned char type, VOID_STAR v);
-    * Push a copy of the object of type @type@ at address @v@ onto the
-    * stack.
-    */
-   int (*cl_push)_PROTO((unsigned char, VOID_STAR));
-
-   /* Prototype: int pop(unsigned char type, VOID_STAR v);
-    * Pops value from stack and assign it to object, whose address is @v@.
-    */
-   int (*cl_pop)_PROTO((unsigned char, VOID_STAR));
-
-   int (*cl_unary_op_result_type)_PROTO((int, unsigned char, unsigned char *));
-   int (*cl_unary_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
-
-   int (*cl_app_unary_op_result_type)_PROTO((int, unsigned char, unsigned char *));
-   int (*cl_app_unary_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
-
-   /* If this function is non-NULL, it will be called for sin, cos, etc... */
-#define SLMATH_SIN	1
-#define SLMATH_COS	2
-#define SLMATH_TAN	3
-#define SLMATH_ATAN	4
-#define SLMATH_ASIN	5
-#define SLMATH_ACOS	6
-#define SLMATH_EXP	7
-#define SLMATH_LOG	8
-#define SLMATH_SQRT	9
-#define SLMATH_LOG10	10
-#define SLMATH_REAL	11
-#define SLMATH_IMAG	12
-#define SLMATH_SINH	13
-#define SLMATH_COSH	14
-#define SLMATH_TANH	15
-#define SLMATH_ATANH	16
-#define SLMATH_ASINH	17
-#define SLMATH_ACOSH	18
-#define SLMATH_TODOUBLE	19
-#define SLMATH_CONJ	20
-
-   int (*cl_math_op)_PROTO((int, unsigned char, VOID_STAR, unsigned int, VOID_STAR));
-   int (*cl_math_op_result_type)_PROTO((int, unsigned char, unsigned char *));
-
-   SL_OOBinary_Type *cl_binary_ops;
-   SL_Typecast_Type *cl_typecast_funs;
-
-   void (*cl_byte_code_destroy)_PROTO((unsigned char, VOID_STAR));
-   void (*cl_user_destroy_fun)_PROTO((unsigned char, VOID_STAR));
-   int (*cl_init_array_object)_PROTO((unsigned char, VOID_STAR));
-   int (*cl_datatype_deref)_PROTO((unsigned char));
-   SLang_Struct_Type *cl_struct_def;
-   int (*cl_dereference) _PROTO((unsigned char, VOID_STAR));
-   int (*cl_acopy) (unsigned char, VOID_STAR, VOID_STAR);
-   int (*cl_apop) _PROTO((unsigned char, VOID_STAR));
-   int (*cl_apush) _PROTO((unsigned char, VOID_STAR));
-   int (*cl_push_literal) _PROTO((unsigned char, VOID_STAR));
-   void (*cl_adestroy)_PROTO((unsigned char, VOID_STAR));
-   int (*cl_push_intrinsic)_PROTO((unsigned char, VOID_STAR));
-   int (*cl_void_typecast)_PROTO((unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR));
-
-   int (*cl_anytype_typecast)_PROTO((unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR));
-
-   /* Array access functions */
-   int (*cl_aput) (unsigned char, unsigned int);
-   int (*cl_aget) (unsigned char, unsigned int);
-   int (*cl_anew) (unsigned char, unsigned int);
-
-   /* length method */
-   int (*cl_length) (unsigned char, VOID_STAR, unsigned int *);
-
-   /* foreach */
-   SLang_Foreach_Context_Type *(*cl_foreach_open) (unsigned char, unsigned int);
-   void (*cl_foreach_close) (unsigned char, SLang_Foreach_Context_Type *);
-   int (*cl_foreach) (unsigned char, SLang_Foreach_Context_Type *);
-
-   /* Structure access: get and put (assign to) fields */
-   int (*cl_sput) (unsigned char, char *);
-   int (*cl_sget) (unsigned char, char *);
-
-   /* File I/O */
-   int (*cl_fread) (unsigned char, FILE *, VOID_STAR, unsigned int, unsigned int *);
-   int (*cl_fwrite) (unsigned char, FILE *, VOID_STAR, unsigned int, unsigned int *);
-   int (*cl_fdread) (unsigned char, int, VOID_STAR, unsigned int, unsigned int *);
-   int (*cl_fdwrite) (unsigned char, int, VOID_STAR, unsigned int, unsigned int *);
-
-   int (*cl_to_bool) (unsigned char, int *);
-   
-   int (*cl_cmp)(unsigned char, VOID_STAR, VOID_STAR, int *);
-
-} SLang_Class_Type;
-
-/* These are the low-level functions for building push/pop methods.  They
- * know nothing about memory management.  For SLANG_CLASS_TYPE_MMT, use the
- * MMT push/pop functions instead.
- */
-extern int SLclass_push_double_obj (unsigned char, double);
-extern int SLclass_push_float_obj (unsigned char, float);
-extern int SLclass_push_long_obj (unsigned char, long);
-extern int SLclass_push_int_obj (unsigned char, int);
-extern int SLclass_push_short_obj (unsigned char, short);
-extern int SLclass_push_char_obj (unsigned char, char);
-extern int SLclass_push_ptr_obj (unsigned char, VOID_STAR);
-extern int SLclass_pop_double_obj (unsigned char, double *);
-extern int SLclass_pop_float_obj (unsigned char, float *);
-extern int SLclass_pop_long_obj (unsigned char, long *);
-extern int SLclass_pop_int_obj (unsigned char, int *);
-extern int SLclass_pop_short_obj (unsigned char, short *);
-extern int SLclass_pop_char_obj (unsigned char, char *);
-extern int SLclass_pop_ptr_obj (unsigned char, VOID_STAR *);
-
-extern SLang_Class_Type *SLclass_allocate_class (char *);
-extern int SLclass_get_class_id (SLang_Class_Type *cl);
-extern int SLclass_create_synonym (char *, unsigned char);
-extern int SLclass_is_class_defined (unsigned char);
-
-extern int SLclass_register_class (SLang_Class_Type *, unsigned char, unsigned int, unsigned char);
-extern int SLclass_set_string_function (SLang_Class_Type *, char *(*)(unsigned char, VOID_STAR));
-extern int SLclass_set_destroy_function (SLang_Class_Type *, void (*)(unsigned char, VOID_STAR));
-extern int SLclass_set_push_function (SLang_Class_Type *, int (*)(unsigned char, VOID_STAR));
-extern int SLclass_set_pop_function (SLang_Class_Type *, int (*)(unsigned char, VOID_STAR));
-
-extern int SLclass_set_aget_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-extern int SLclass_set_aput_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-extern int SLclass_set_anew_function (SLang_Class_Type *, int (*)(unsigned char, unsigned int));
-
-extern int SLclass_set_sget_function (SLang_Class_Type *, int (*)(unsigned char, char *));
-extern int SLclass_set_sput_function (SLang_Class_Type *, int (*)(unsigned char, char *));
-
-/* Typecast object on the stack to type p1.  p2 and p3 should be set to 1 */
-extern int SLclass_typecast (unsigned char, int, int);
-
-extern int SLclass_add_unary_op (unsigned char,
-				 int (*) (int,
-					  unsigned char, VOID_STAR, unsigned int,
-					  VOID_STAR),
-				 int (*) (int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_app_unary_op (unsigned char,
-			  int (*) (int,
-				   unsigned char, VOID_STAR, unsigned int,
-				   VOID_STAR),
-			  int (*) (int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_binary_op (unsigned char, unsigned char,
-		       int (*) (int,
-				unsigned char, VOID_STAR, unsigned int,
-				unsigned char, VOID_STAR, unsigned int,
-				VOID_STAR),
-		       int (*) (int, unsigned char, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_math_op (unsigned char,
-		     int (*)(int,
-			     unsigned char, VOID_STAR, unsigned int,
-			     VOID_STAR),
-		     int (*)(int, unsigned char, unsigned char *));
-
-extern int
-SLclass_add_typecast (unsigned char /* from */, unsigned char /* to */,
-		      int (*)_PROTO((unsigned char, VOID_STAR, unsigned int,
-				     unsigned char, VOID_STAR)),
-		      int	       /* allow implicit typecasts */
-		      );
-
-extern char *SLclass_get_datatype_name (unsigned char);
-
-extern double SLcomplex_abs (double *);
-extern double *SLcomplex_times (double *, double *, double *);
-extern double *SLcomplex_divide (double *, double *, double *);
-extern double *SLcomplex_sin (double *, double *);
-extern double *SLcomplex_cos (double *, double *);
-extern double *SLcomplex_tan (double *, double *);
-extern double *SLcomplex_asin (double *, double *);
-extern double *SLcomplex_acos (double *, double *);
-extern double *SLcomplex_atan (double *, double *);
-extern double *SLcomplex_exp (double *, double *);
-extern double *SLcomplex_log (double *, double *);
-extern double *SLcomplex_log10 (double *, double *);
-extern double *SLcomplex_sqrt (double *, double *);
-extern double *SLcomplex_sinh (double *, double *);
-extern double *SLcomplex_cosh (double *, double *);
-extern double *SLcomplex_tanh (double *, double *);
-extern double *SLcomplex_pow (double *, double *, double *);
-extern double SLmath_hypot (double x, double y);
-
-/* Not implemented yet */
-extern double *SLcomplex_asinh (double *, double *);
-extern double *SLcomplex_acosh (double *, double *);
-extern double *SLcomplex_atanh (double *, double *);
-
-#ifdef _SLANG_SOURCE_
-typedef struct _SLang_MMT_Type SLang_MMT_Type;
-#else
-typedef int SLang_MMT_Type;
-#endif
-
-extern void SLang_free_mmt (SLang_MMT_Type *);
-extern VOID_STAR SLang_object_from_mmt (SLang_MMT_Type *);
-extern SLang_MMT_Type *SLang_create_mmt (unsigned char, VOID_STAR);
-extern int SLang_push_mmt (SLang_MMT_Type *);
-extern SLang_MMT_Type *SLang_pop_mmt (unsigned char);
-extern void SLang_inc_mmt (SLang_MMT_Type *);
-
-/* Maximum number of dimensions of an array. */
-#define SLARRAY_MAX_DIMS		7
-typedef struct _SLang_Array_Type
-{
-   unsigned char data_type;
-   unsigned int sizeof_type;
-   VOID_STAR data;
-   unsigned int num_elements;
-   unsigned int num_dims;
-   int dims [SLARRAY_MAX_DIMS];
-   VOID_STAR (*index_fun)_PROTO((struct _SLang_Array_Type *, int *));
-   /* This function is designed to allow a type to store an array in
-    * any manner it chooses.  This function returns the address of the data
-    * value at the specified index location.
-    */
-   unsigned int flags;
-#define SLARR_DATA_VALUE_IS_READ_ONLY		1
-#define SLARR_DATA_VALUE_IS_POINTER		2
-#define SLARR_DATA_VALUE_IS_RANGE		4
-#define SLARR_DATA_VALUE_IS_INTRINSIC		8
-   SLang_Class_Type *cl;
-   unsigned int num_refs;
-}
-SLang_Array_Type;
-
-extern int SLang_pop_array_of_type (SLang_Array_Type **, unsigned char);
-extern int SLang_pop_array (SLang_Array_Type **, int);
-extern int SLang_push_array (SLang_Array_Type *, int);
-extern void SLang_free_array (SLang_Array_Type *);
-extern SLang_Array_Type *SLang_create_array (unsigned char, int, VOID_STAR, int *, unsigned int);
-extern SLang_Array_Type *SLang_duplicate_array (SLang_Array_Type *);
-extern int SLang_get_array_element (SLang_Array_Type *, int *, VOID_STAR);
-extern int SLang_set_array_element (SLang_Array_Type *, int *, VOID_STAR);
-
-
-/*}}}*/
-
-/*{{{ Interpreter Function Prototypes */
-
-  extern volatile int SLang_Error;
-/* Non zero if error occurs.  Must be reset to zero to continue. */
-/* error codes, severe errors are less than 0 */
-#define SL_APPLICATION_ERROR		-2
-#define SL_VARIABLE_UNINITIALIZED	-3
-#define SL_INTERNAL_ERROR		-5
-#define SL_STACK_OVERFLOW		-6
-#define SL_STACK_UNDERFLOW		-7
-#define SL_UNDEFINED_NAME		-8
-#define SL_SYNTAX_ERROR			-9
-#define SL_DUPLICATE_DEFINITION		-10
-#define SL_TYPE_MISMATCH		-11
-#define SL_OBJ_UNKNOWN			-13
-#define SL_UNKNOWN_ERROR		-14
-#define SL_TYPE_UNDEFINED_OP_ERROR	-16
-
-#define SL_INTRINSIC_ERROR		1
-/* Intrinsic error is an error generated by intrinsic functions */
-#define SL_USER_BREAK			2
-#define SL_DIVIDE_ERROR			3
-#define SL_OBJ_NOPEN			4
-#define SL_USER_ERROR			5
-#define SL_USAGE_ERROR			6
-#define SL_READONLY_ERROR		7
-#define SL_INVALID_PARM			8
-#define SL_NOT_IMPLEMENTED		9
-#define SL_MALLOC_ERROR			10
-#define SL_OVERFLOW			11
-#define SL_FLOATING_EXCEPTION		12
-
-/* Compatibility */
-#define USER_BREAK SL_USER_BREAK
-#define INTRINSIC_ERROR SL_INTRINSIC_ERROR
-
-  extern int SLang_Traceback;
-  /* If non-zero, dump an S-Lang traceback upon error.  Available as
-     _traceback in S-Lang. */
-
-  extern char *SLang_User_Prompt;
-  /* Prompt to use when reading from stdin */
-  extern int SLang_Version;
-  extern char *SLang_Version_String;
-extern char *SLang_Doc_Dir;
-
-extern void (*SLang_VMessage_Hook) (char *, va_list);
-extern void SLang_vmessage (char *, ...);
-
-  extern void (*SLang_Error_Hook)(char *);
-  /* Pointer to application dependent error messaging routine.  By default,
-     messages are displayed on stderr. */
-
-  extern void (*SLang_Exit_Error_Hook)(char *, va_list);
-  extern void SLang_exit_error (char *, ...);
-  extern void (*SLang_Dump_Routine)(char *);
-  /* Called if S-Lang traceback is enabled as well as other debugging
-     routines (e.g., trace).  By default, these messages go to stderr. */
-
-  extern void (*SLang_Interrupt)(void);
-  /* function to call whenever inner interpreter is entered.  This is
-     a good place to set SLang_Error to USER_BREAK. */
-
-  extern void (*SLang_User_Clear_Error)(void);
-  /* function that gets called when '_clear_error' is called. */
-
-  /* If non null, these call C functions before and after a slang function. */
-  extern void (*SLang_Enter_Function)(char *);
-extern void (*SLang_Exit_Function)(char *);
-
-extern int SLang_Num_Function_Args;
-
-/* Functions: */
-
-extern int SLang_init_all (void);
-/* Initializes interpreter and all modules */
-
-extern int SLang_init_slang (void);
-/* This function is mandatory and must be called by all applications that
- * use the interpreter
- */
-extern int SLang_init_posix_process (void);   /* process specific intrinsics */
-extern int SLang_init_stdio (void);    /* fgets, etc. stdio functions  */
-extern int SLang_init_posix_dir (void);
-extern int SLang_init_ospath (void);
-
-extern int SLang_init_slmath (void);
-/* called if math functions sin, cos, etc... are needed. */
-
-   extern int SLang_init_slfile (void);
-   extern int SLang_init_slunix (void);
-   /* These functions are obsolte.  Use init_stdio, posix_process, etc. */
-
-extern int SLang_init_slassoc (void);
-/* Assoc Arrays (Hashes) */
-
-extern int SLang_init_array (void);
-/* Additional arrays functions: transpose, etc... */
-
-/* Dynamic linking facility */
-extern int SLang_init_import (void);
-
-   extern int SLang_load_file (char *);
-   /* Load a file of S-Lang code for interpreting.  If the parameter is
-    * NULL, input comes from stdin. */
-
-   extern void SLang_restart(int);
-   /* should be called if an error occurs.  If the passed integer is
-    * non-zero, items are popped off the stack; otherwise, the stack is
-    * left intact.  Any time the stack is believed to be trashed, this routine
-    * should be called with a non-zero argument (e.g., if setjmp/longjmp is
-    * called). */
-
-   extern int SLang_byte_compile_file(char *, int);
-   /* takes a file of S-Lang code and ``byte-compiles'' it for faster
-    * loading.  The new filename is equivalent to the old except that a `c' is
-    * appended to the name.  (e.g., init.sl --> init.slc).  The second
-    * specified the method; currently, it is not used.
-    */
-
-   extern int SLang_autoload(char *, char *);
-   /* Automatically load S-Lang function p1 from file p2.  This function
-      is also available via S-Lang */
-
-   extern int SLang_load_string(char *);
-   /* Like SLang_load_file except input is from a null terminated string. */
-
-   extern int SLdo_pop(void);
-   /* pops item off stack and frees any memory associated with it */
-   extern int SLdo_pop_n(unsigned int);
-   /* pops n items off stack and frees any memory associated with them */
-
-extern int SLang_pop_integer(int *);
-extern int SLang_pop_uinteger(unsigned int *);
-   /* pops integer *p0 from the stack.  Returns 0 upon success and non-zero
-    * if the stack is empty or a type mismatch occurs, setting SLang_Error.
-    */
-extern int SLang_pop_char (char *);
-extern int SLang_pop_uchar (unsigned char *);
-extern int SLang_pop_short(short *);
-extern int SLang_pop_ushort(unsigned short *);
-extern int SLang_pop_long(long *);
-extern int SLang_pop_ulong(unsigned long *);
-
-extern int SLang_pop_float(float *);
-extern int SLang_pop_double(double *, int *, int *);
-   /* Pops double *p1 from stack.  If *p3 is non-zero, *p1 was derived
-      from the integer *p2. Returns zero upon success. */
-
-   extern int SLang_pop_complex (double *, double *);
-
-   extern int SLpop_string (char **);
-   extern int SLang_pop_string(char **, int *);
-   /* pops string *p0 from stack.  If *p1 is non-zero, the string must be
-    * freed after its use.  DO NOT FREE p0 if *p1 IS ZERO! Returns 0 upon
-    * success */
-
-   extern int SLang_push_complex (double, double);
-
-   extern int SLang_push_char (char);
-   extern int SLang_push_uchar (unsigned char);
-
-   extern int SLang_push_integer(int);
-   extern int SLang_push_uinteger(unsigned int);
-   /* push integer p1 on stack */
-
-   extern int SLang_push_short(short);
-   extern int SLang_push_ushort(unsigned short);
-   extern int SLang_push_long(long);
-   extern int SLang_push_ulong(unsigned long);
-   extern int SLang_push_float(float);
-   extern int SLang_push_double(double);
-   /* Push double onto stack */
-
-   extern int SLang_push_string(char *);
-   /* Push string p1 onto stack */
-
-   extern int SLang_push_malloced_string(char *);
-   /* The normal SLang_push_string pushes an slstring.  This one converts
-    * a normally malloced string to an slstring, and then frees the 
-    * malloced string.  So, do NOT use the malloced string after calling
-    * this routine because it will be freed!  The routine returns -1 upon 
-    * error, but the string will be freed.
-    */
-
-extern int SLang_push_null (void);
-extern int SLang_pop_null (void);
-
-extern int SLang_push_value (unsigned char type, VOID_STAR);
-extern int SLang_pop_value (unsigned char type, VOID_STAR);
-extern void SLang_free_value (unsigned char type, VOID_STAR);
-
-typedef struct _SLang_Object_Type SLang_Any_Type;
-
-extern int SLang_pop_anytype (SLang_Any_Type **);
-extern int SLang_push_anytype (SLang_Any_Type *);
-extern void SLang_free_anytype (SLang_Any_Type *);
-
-#ifdef _SLANG_SOURCE_
-typedef struct _SLang_Ref_Type SLang_Ref_Type;
-#else
-typedef int SLang_Ref_Type;
-#endif
-
-extern int SLang_pop_ref (SLang_Ref_Type **);
-extern void SLang_free_ref (SLang_Ref_Type *);
-extern int SLang_assign_to_ref (SLang_Ref_Type *, unsigned char, VOID_STAR);
-extern SLang_Name_Type *SLang_pop_function (void);
-extern SLang_Name_Type *SLang_get_fun_from_ref (SLang_Ref_Type *);
-extern void SLang_free_function (SLang_Name_Type *f);
-
-   extern int SLang_is_defined(char *);
-   /* Return non-zero is p1 is defined otherwise returns 0. */
-
-   extern int SLang_run_hooks(char *, unsigned int, ...);
-   /* calls S-Lang function p1 pushing p2 strings in the variable argument
-    * list onto the stack first.
-    * Returns -1 upon error, 1 if hooks exists and it ran,
-    * or 0 if hook does not exist.  Thus it returns non-zero is hook was called.
-    */
-
-/* These functions return 1 if the indicated function exists and the function
- * runs without error.  If the function does not exist, the function returns
- * 0.  Otherwise -1 is returned with SLang_Error set appropriately.
- */
-extern int SLexecute_function (SLang_Name_Type *);
-extern int SLang_execute_function(char *);
-
-
-extern int SLang_end_arg_list (void);
-extern int SLang_start_arg_list (void);
-
-extern void SLang_verror (int, char *, ...);
-
-extern void SLang_doerror(char *);
-   /* set SLang_Error and display p1 as error message */
-
-extern int SLang_add_intrinsic_array (char *,   /* name */
-				      unsigned char,   /* type */
-				      int,   /* readonly */
-				      VOID_STAR,   /* data */
-				      unsigned int, ...);   /* num dims */
-
-extern int SLextract_list_element (char *, unsigned int, char,
-				   char *, unsigned int);
-
-extern void SLexpand_escaped_string (register char *, register char *,
-				     register char *);
-
-extern SLang_Name_Type *SLang_get_function (char *);
-extern void SLang_release_function (SLang_Name_Type *);
-
-extern int SLreverse_stack (int);
-extern int SLroll_stack (int);
-/* If argument p is positive, the top p objects on the stack are rolled
- * up.  If negative, the stack is rolled down.
- */
-extern int SLdup_n (int n);
-/* Duplicate top n elements of stack */
-
-extern int SLang_peek_at_stack1 (void);
-extern int SLang_peek_at_stack (void);
-/* Returns type of next object on stack-- -1 upon stack underflow. */
-extern void SLmake_lut (unsigned char *, unsigned char *, unsigned char);
-
-   extern int SLang_guess_type (char *);
-
-extern int SLstruct_create_struct (unsigned int,
-				   char **,
-				   unsigned char *,
-				   VOID_STAR *);
-
-/*}}}*/
-
-/*{{{ Misc Functions */
-
-/* This is an interface to atexit */
-extern int SLang_add_cleanup_function (void (*)(void));
-
-extern char *SLmake_string (char *);
-extern char *SLmake_nstring (char *, unsigned int);
-/* Returns a null terminated string made from the first n characters of the
- * string.
- */
-
-/* The string created by this routine must be freed by SLang_free_slstring
- * and nothing else!!  Also these strings must not be modified.  Use
- * SLmake_string if you intend to modify them!!
- */
-extern char *SLang_create_nslstring (char *, unsigned int);
-extern char *SLang_create_slstring (char *);
-extern void SLang_free_slstring (char *);    /* handles NULL */
-extern int SLang_pop_slstring (char **);   /* free with SLang_free_slstring */
-extern char *SLang_concat_slstrings (char *a, char *b);
-extern char *SLang_create_static_slstring (char *);   /* adds a string that will not get deleted */
-extern void SLstring_dump_stats (void);
-
-/* Binary strings */
-/* The binary string is an opaque type.  Use the SLbstring_get_pointer function
- * to get a pointer and length.
- */
-typedef struct _SLang_BString_Type SLang_BString_Type;
-extern unsigned char *SLbstring_get_pointer (SLang_BString_Type *, unsigned int *);
-
-extern SLang_BString_Type *SLbstring_dup (SLang_BString_Type *);
-extern SLang_BString_Type *SLbstring_create (unsigned char *, unsigned int);
-
-/* The create_malloced function used the first argument which is assumed
- * to be a pointer to a len + 1 malloced string.  The extra byte is for
- * \0 termination.
- */
-extern SLang_BString_Type *SLbstring_create_malloced (unsigned char *, unsigned int, int);
-
-/* Create a bstring from an slstring */
-extern SLang_BString_Type *SLbstring_create_slstring (char *);
-
-extern void SLbstring_free (SLang_BString_Type *);
-extern int SLang_pop_bstring (SLang_BString_Type **);
-extern int SLang_push_bstring (SLang_BString_Type *);
-
-extern char *SLmalloc (unsigned int);
-extern char *SLcalloc (unsigned int, unsigned int);
-extern void SLfree(char *);	       /* This function handles NULL */
-extern char *SLrealloc (char *, unsigned int);
-
-extern char *SLcurrent_time_string (void);
-
-extern int SLatoi(unsigned char *);
-extern long SLatol (unsigned char *);
-extern unsigned long SLatoul (unsigned char *);
-
-extern int SLang_pop_fileptr (SLang_MMT_Type **, FILE **);
-extern char *SLang_get_name_from_fileptr (SLang_MMT_Type *);
-
-typedef struct _SLFile_FD_Type SLFile_FD_Type;
-extern SLFile_FD_Type *SLfile_create_fd (char *, int);
-extern void SLfile_free_fd (SLFile_FD_Type *);
-extern int SLfile_push_fd (SLFile_FD_Type *);
-extern int SLfile_pop_fd (SLFile_FD_Type **);
-extern int SLfile_get_fd (SLFile_FD_Type *, int *);
-extern SLFile_FD_Type *SLfile_dup_fd (SLFile_FD_Type *f0);
-extern int SLang_init_posix_io (void);
-
-typedef double (*SLang_To_Double_Fun_Type)(VOID_STAR);
-extern SLang_To_Double_Fun_Type SLarith_get_to_double_fun (unsigned char, unsigned int *);
-
-extern int SLang_set_argc_argv (int, char **);
-
-/*}}}*/
-
-/*{{{ SLang getkey interface Functions */
-
-#ifdef REAL_UNIX_SYSTEM
-extern int SLang_TT_Baud_Rate;
-extern int SLang_TT_Read_FD;
-#endif
-
-extern int SLang_init_tty (int, int, int);
-/* Initializes the tty for single character input.  If the first parameter *p1
- * is in the range 0-255, it will be used for the abort character;
- * otherwise, (unix only) if it is -1, the abort character will be the one
- * used by the terminal.  If the second parameter p2 is non-zero, flow
- * control is enabled.  If the last parmeter p3 is zero, output processing
- * is NOT turned on.  A value of zero is required for the screen management
- * routines. Returns 0 upon success. In addition, if SLang_TT_Baud_Rate ==
- * 0 when this function is called, SLang will attempt to determine the
- * terminals baud rate.  As far as the SLang library is concerned, if
- * SLang_TT_Baud_Rate is less than or equal to zero, the baud rate is
- * effectively infinite.
- */
-
-extern void SLang_reset_tty (void);
-/* Resets tty to what it was prior to a call to SLang_init_tty */
-#ifdef REAL_UNIX_SYSTEM
-extern void SLtty_set_suspend_state (int);
-   /* If non-zero argument, terminal driver will be told to react to the
-    * suspend character.  If 0, it will not.
-    */
-extern int (*SLang_getkey_intr_hook) (void);
-#endif
-
-#define SLANG_GETKEY_ERROR 0xFFFF
-extern unsigned int SLang_getkey (void);
-/* reads a single key from the tty.  If the read fails,  0xFFFF is returned. */
-
-#ifdef IBMPC_SYSTEM
-extern int SLgetkey_map_to_ansi (int);
-#endif
-
-extern int SLang_ungetkey_string (unsigned char *, unsigned int);
-extern int SLang_buffer_keystring (unsigned char *, unsigned int);
-extern int SLang_ungetkey (unsigned char);
-extern void SLang_flush_input (void);
-extern int SLang_input_pending (int);
-extern int SLang_Abort_Char;
-/* The value of the character (0-255) used to trigger SIGINT */
-extern int SLang_Ignore_User_Abort;
-/* If non-zero, pressing the abort character will not result in USER_BREAK
- * SLang_Error. */
-
-extern int SLang_set_abort_signal (void (*)(int));
-/* If SIGINT is generated, the function p1 will be called.  If p1 is NULL
- * the SLang_default signal handler is called.  This sets SLang_Error to
- * USER_BREAK.  I suspect most users will simply want to pass NULL.
- */
-extern unsigned int SLang_Input_Buffer_Len;
-
-extern volatile int SLKeyBoard_Quit;
-
-#ifdef VMS
-/* If this function returns -1, ^Y will be added to input buffer. */
-extern int (*SLtty_VMS_Ctrl_Y_Hook) (void);
-#endif
-/*}}}*/
-
-/*{{{ SLang Keymap routines */
-
-typedef struct SLKeymap_Function_Type
-{
-   char *name;
-   int (*f)(void);
-}
-SLKeymap_Function_Type;
-
-#define SLANG_MAX_KEYMAP_KEY_SEQ	14
-typedef struct SLang_Key_Type
-{
-   struct SLang_Key_Type *next;
-   union
-     {
-	char *s;
-	FVOID_STAR f;
-	unsigned int keysym;
-     }
-     f;
-   unsigned char type;	       /* type of function */
-#define SLKEY_F_INTERPRET	0x01
-#define SLKEY_F_INTRINSIC	0x02
-#define SLKEY_F_KEYSYM		0x03
-   unsigned char str[SLANG_MAX_KEYMAP_KEY_SEQ + 1];/* key sequence */
-}
-SLang_Key_Type;
-
-typedef struct SLKeyMap_List_Type
-{
-   char *name;			       /* hashed string */
-   SLang_Key_Type *keymap;
-   SLKeymap_Function_Type *functions;  /* intrinsic functions */
-}
-SLKeyMap_List_Type;
-
-/* This is arbitrary but I have got to start somewhere */
-#define SLANG_MAX_KEYMAPS 30
-extern SLKeyMap_List_Type SLKeyMap_List[SLANG_MAX_KEYMAPS];
-
-extern char *SLang_process_keystring(char *);
-
-extern int SLkm_define_key (char *, FVOID_STAR, SLKeyMap_List_Type *);
-
-extern int SLang_define_key(char *, char *, SLKeyMap_List_Type *);
-/* Like define_key1 except that p2 is a string that is to be associated with
- * a function in the functions field of p3.  This routine calls define_key1.
- */
-
-extern int SLkm_define_keysym (char *, unsigned int, SLKeyMap_List_Type *);
-
-extern void SLang_undefine_key(char *, SLKeyMap_List_Type *);
-
-extern SLKeyMap_List_Type *SLang_create_keymap(char *, SLKeyMap_List_Type *);
-/* create and returns a pointer to a new keymap named p1 created by copying
- * keymap p2.  If p2 is NULL, it is up to the calling routine to initialize
- * the keymap.
- */
-
-extern char *SLang_make_keystring(unsigned char *);
-
-extern SLang_Key_Type *SLang_do_key(SLKeyMap_List_Type *, int (*)(void));
-/* read a key using keymap p1 with getkey function p2 */
-
-extern
-     FVOID_STAR
-     SLang_find_key_function(char *, SLKeyMap_List_Type *);
-
-extern SLKeyMap_List_Type *SLang_find_keymap(char *);
-
-extern int SLang_Last_Key_Char;
-extern int SLang_Key_TimeOut_Flag;
-
-/*}}}*/
-
-/*{{{ SLang Readline Interface */
-
-typedef struct SLang_Read_Line_Type
-{
-   struct SLang_Read_Line_Type *prev, *next;
-   unsigned char *buf;
-   int buf_len;			       /* number of chars in the buffer */
-   int num;			       /* num and misc are application specific*/
-   int misc;
-} SLang_Read_Line_Type;
-
-/* Maximum size of display */
-#define SLRL_DISPLAY_BUFFER_SIZE 256
-
-typedef struct
-{
-   SLang_Read_Line_Type *root, *tail, *last;
-   unsigned char *buf;		       /* edit buffer */
-   int buf_len;			       /* sizeof buffer */
-   int point;			       /* current editing point */
-   int tab;			       /* tab width */
-   int len;			       /* current line size */
-
-   /* display variables */
-   int edit_width;		       /* length of display field */
-   int curs_pos;			       /* current column */
-   int start_column;		       /* column offset of display */
-   int dhscroll;		       /* amount to use for horiz scroll */
-   char *prompt;
-
-   FVOID_STAR last_fun;		       /* last function executed by rl */
-
-   /* These two contain an image of what is on the display */
-   unsigned char upd_buf1[SLRL_DISPLAY_BUFFER_SIZE];
-   unsigned char upd_buf2[SLRL_DISPLAY_BUFFER_SIZE];
-   unsigned char *old_upd, *new_upd;   /* pointers to previous two buffers */
-   int new_upd_len, old_upd_len;       /* length of output buffers */
-
-   SLKeyMap_List_Type *keymap;
-
-   /* tty variables */
-   unsigned int flags;		       /*  */
-#define SL_RLINE_NO_ECHO	1
-#define SL_RLINE_USE_ANSI	2
-#define SL_RLINE_BLINK_MATCH	4
-   unsigned int (*getkey)(void);       /* getkey function -- required */
-   void (*tt_goto_column)(int);
-   void (*tt_insert)(char);
-   void (*update_hook)(unsigned char *, int, int);
-   /* The update hook is called with a pointer to a buffer p1 that contains
-    * an image of what the update hook is suppoed to produce.  The length
-    * of the buffer is p2 and after the update, the cursor is to be placed
-    * in column p3.
-    */
-   /* This function is only called when blinking matches */
-   int (*input_pending)(int);
-   unsigned long reserved[4];
-} SLang_RLine_Info_Type;
-
-extern int SLang_RL_EOF_Char;
-
-extern SLang_Read_Line_Type * SLang_rline_save_line (SLang_RLine_Info_Type *);
-extern int SLang_init_readline (SLang_RLine_Info_Type *);
-extern int SLang_read_line (SLang_RLine_Info_Type *);
-extern int SLang_rline_insert (char *);
-extern void SLrline_redraw (SLang_RLine_Info_Type *);
-extern int SLang_Rline_Quit;
-
-/*}}}*/
-
-/*{{{ Low Level Screen Output Interface */
-
-extern unsigned long SLtt_Num_Chars_Output;
-extern int SLtt_Baud_Rate;
-
-typedef unsigned long SLtt_Char_Type;
-
-#define SLTT_BOLD_MASK	0x01000000UL
-#define SLTT_BLINK_MASK	0x02000000UL
-#define SLTT_ULINE_MASK	0x04000000UL
-#define SLTT_REV_MASK	0x08000000UL
-#define SLTT_ALTC_MASK  0x10000000UL
-
-extern int SLtt_Screen_Rows;
-extern int SLtt_Screen_Cols;
-extern int SLtt_Term_Cannot_Insert;
-extern int SLtt_Term_Cannot_Scroll;
-extern int SLtt_Use_Ansi_Colors;
-extern int SLtt_Ignore_Beep;
-#if defined(REAL_UNIX_SYSTEM)
-extern int SLtt_Force_Keypad_Init;
-extern int SLang_TT_Write_FD;
-#endif
-
-#ifndef IBMPC_SYSTEM
-extern char *SLtt_Graphics_Char_Pairs;
-#endif
-
-#ifndef __GO32__
-#if defined(VMS) || defined(REAL_UNIX_SYSTEM)
-extern int SLtt_Blink_Mode;
-extern int SLtt_Use_Blink_For_ACS;
-extern int SLtt_Newline_Ok;
-extern int SLtt_Has_Alt_Charset;
-extern int SLtt_Has_Status_Line;       /* if 0, NO.  If > 0, YES, IF -1, ?? */
-# ifndef VMS
-extern int SLtt_Try_Termcap;
-# endif
-#endif
-#endif
-
-#if defined(IBMPC_SYSTEM)
-extern int SLtt_Msdos_Cheap_Video;
-#endif
-
-typedef unsigned short SLsmg_Char_Type;
-#define SLSMG_EXTRACT_CHAR(x) ((x) & 0xFF)
-#define SLSMG_EXTRACT_COLOR(x) (((x)>>8)&0xFF)
-#define SLSMG_BUILD_CHAR(ch,color) (((SLsmg_Char_Type)(unsigned char)(ch))|((color)<<8))
-
-extern int SLtt_flush_output (void);
-extern void SLtt_set_scroll_region(int, int);
-extern void SLtt_reset_scroll_region(void);
-extern void SLtt_reverse_video (int);
-extern void SLtt_bold_video (void);
-extern void SLtt_begin_insert(void);
-extern void SLtt_end_insert(void);
-extern void SLtt_del_eol(void);
-extern void SLtt_goto_rc (int, int);
-extern void SLtt_delete_nlines(int);
-extern void SLtt_delete_char(void);
-extern void SLtt_erase_line(void);
-extern void SLtt_normal_video(void);
-extern void SLtt_cls(void);
-extern void SLtt_beep(void);
-extern void SLtt_reverse_index(int);
-extern void SLtt_smart_puts(SLsmg_Char_Type *, SLsmg_Char_Type *, int, int);
-extern void SLtt_write_string (char *);
-extern void SLtt_putchar(char);
-extern int SLtt_init_video (void);
-extern int SLtt_reset_video (void);
-extern void SLtt_get_terminfo(void);
-extern void SLtt_get_screen_size (void);
-extern int SLtt_set_cursor_visibility (int);
-
-extern int SLtt_set_mouse_mode (int, int);
-
-#if defined(VMS) || defined(REAL_UNIX_SYSTEM)
-extern int SLtt_initialize (char *);
-extern void SLtt_enable_cursor_keys(void);
-extern void SLtt_set_term_vtxxx(int *);
-extern void SLtt_set_color_esc (int, char *);
-extern void SLtt_wide_width(void);
-extern void SLtt_narrow_width(void);
-extern void SLtt_set_alt_char_set (int);
-extern int SLtt_write_to_status_line (char *, int);
-extern void SLtt_disable_status_line (void);
-# ifdef REAL_UNIX_SYSTEM
-/* These are termcap/terminfo routines that assume SLtt_initialize has
- * been called.
- */
-extern char *SLtt_tgetstr (char *);
-extern int SLtt_tgetnum (char *);
-extern int SLtt_tgetflag (char *);
-
-/* The following are terminfo-only routines -- these prototypes will change
- * in V2.x.
- */
-extern char *SLtt_tigetent (char *);
-extern char *SLtt_tigetstr (char *, char **);
-extern int SLtt_tigetnum (char *, char **);
-# endif
-#endif
-
-extern SLtt_Char_Type SLtt_get_color_object (int);
-extern void SLtt_set_color_object (int, SLtt_Char_Type);
-extern void SLtt_set_color (int, char *, char *, char *);
-extern void SLtt_set_mono (int, char *, SLtt_Char_Type);
-extern void SLtt_add_color_attribute (int, SLtt_Char_Type);
-extern void SLtt_set_color_fgbg (int, SLtt_Char_Type, SLtt_Char_Type);
-
-/*}}}*/
-
-/*{{{ SLang Preprocessor Interface */
-
-typedef struct
-{
-   int this_level;
-   int exec_level;
-   int prev_exec_level;
-   char preprocess_char;
-   char comment_char;
-   unsigned char flags;
-#define SLPREP_BLANK_LINES_OK	1
-#define SLPREP_COMMENT_LINES_OK	2
-}
-SLPreprocess_Type;
-
-extern int SLprep_open_prep (SLPreprocess_Type *);
-extern void SLprep_close_prep (SLPreprocess_Type *);
-extern int SLprep_line_ok (char *, SLPreprocess_Type *);
-   extern int SLdefine_for_ifdef (char *);
-   /* Adds a string to the SLang #ifdef preparsing defines. SLang already
-      defines MSDOS, UNIX, and VMS on the appropriate system. */
-extern int (*SLprep_exists_hook) (char *, char);
-
-/*}}}*/
-
-/*{{{ SLsmg Screen Management Functions */
-
-extern void SLsmg_fill_region (int, int, unsigned int, unsigned int, unsigned char);
-extern void SLsmg_set_char_set (int);
-#ifndef IBMPC_SYSTEM
-extern int SLsmg_Scroll_Hash_Border;
-#endif
-extern int SLsmg_suspend_smg (void);
-extern int SLsmg_resume_smg (void);
-extern void SLsmg_erase_eol (void);
-extern void SLsmg_gotorc (int, int);
-extern void SLsmg_erase_eos (void);
-extern void SLsmg_reverse_video (void);
-extern void SLsmg_set_color (int);
-extern void SLsmg_normal_video (void);
-extern void SLsmg_printf (char *, ...);
-extern void SLsmg_vprintf (char *, va_list);
-extern void SLsmg_write_string (char *);
-extern void SLsmg_write_nstring (char *, unsigned int);
-extern void SLsmg_write_char (char);
-extern void SLsmg_write_nchars (char *, unsigned int);
-extern void SLsmg_write_wrapped_string (char *, int, int, unsigned int, unsigned int, int);
-extern void SLsmg_cls (void);
-extern void SLsmg_refresh (void);
-extern void SLsmg_touch_lines (int, unsigned int);
-extern void SLsmg_touch_screen (void);
-extern int SLsmg_init_smg (void);
-extern int SLsmg_reinit_smg (void);
-extern void SLsmg_reset_smg (void);
-extern SLsmg_Char_Type SLsmg_char_at(void);
-extern void SLsmg_set_screen_start (int *, int *);
-extern void SLsmg_draw_hline (unsigned int);
-extern void SLsmg_draw_vline (int);
-extern void SLsmg_draw_object (int, int, unsigned char);
-extern void SLsmg_draw_box (int, int, unsigned int, unsigned int);
-extern int SLsmg_get_column(void);
-extern int SLsmg_get_row(void);
-extern void SLsmg_forward (int);
-extern void SLsmg_write_color_chars (SLsmg_Char_Type *, unsigned int);
-extern unsigned int SLsmg_read_raw (SLsmg_Char_Type *, unsigned int);
-extern unsigned int SLsmg_write_raw (SLsmg_Char_Type *, unsigned int);
-extern void SLsmg_set_color_in_region (int, int, int, unsigned int, unsigned int);
-extern int SLsmg_Display_Eight_Bit;
-extern int SLsmg_Tab_Width;
-
-#define SLSMG_NEWLINE_IGNORED	0      /* default */
-#define SLSMG_NEWLINE_MOVES	1      /* moves to next line, column 0 */
-#define SLSMG_NEWLINE_SCROLLS	2      /* moves but scrolls at bottom of screen */
-#define SLSMG_NEWLINE_PRINTABLE	3      /* prints as ^J */
-extern int SLsmg_Newline_Behavior;
-
-extern int SLsmg_Backspace_Moves;
-
-#ifdef IBMPC_SYSTEM
-# define SLSMG_HLINE_CHAR	0xC4
-# define SLSMG_VLINE_CHAR	0xB3
-# define SLSMG_ULCORN_CHAR	0xDA
-# define SLSMG_URCORN_CHAR	0xBF
-# define SLSMG_LLCORN_CHAR	0xC0
-# define SLSMG_LRCORN_CHAR	0xD9
-# define SLSMG_RTEE_CHAR	0xB4
-# define SLSMG_LTEE_CHAR	0xC3
-# define SLSMG_UTEE_CHAR	0xC2
-# define SLSMG_DTEE_CHAR	0xC1
-# define SLSMG_PLUS_CHAR	0xC5
-/* There are several to choose from: 0xB0, 0xB1, and 0xB2 */
-# define SLSMG_CKBRD_CHAR	0xB0
-# define SLSMG_DIAMOND_CHAR	0x04
-# define SLSMG_DEGREE_CHAR	0xF8
-# define SLSMG_PLMINUS_CHAR	0xF1
-# define SLSMG_BULLET_CHAR	0xF9
-# define SLSMG_LARROW_CHAR	0x1B
-# define SLSMG_RARROW_CHAR	0x1A
-# define SLSMG_DARROW_CHAR	0x19
-# define SLSMG_UARROW_CHAR	0x18
-# define SLSMG_BOARD_CHAR	0xB2
-# define SLSMG_BLOCK_CHAR	0xDB
-#else
-# if defined(AMIGA)
-#  define SLSMG_HLINE_CHAR	'-'
-#  define SLSMG_VLINE_CHAR	'|'
-#  define SLSMG_ULCORN_CHAR	'+'
-#  define SLSMG_URCORN_CHAR	'+'
-#  define SLSMG_LLCORN_CHAR	'+'
-#  define SLSMG_LRCORN_CHAR	'+'
-#  define SLSMG_CKBRD_CHAR	'#'
-#  define SLSMG_RTEE_CHAR	'+'
-#  define SLSMG_LTEE_CHAR	'+'
-#  define SLSMG_UTEE_CHAR	'+'
-#  define SLSMG_DTEE_CHAR	'+'
-#  define SLSMG_PLUS_CHAR	'+'
-#  define SLSMG_DIAMOND_CHAR	'+'
-#  define SLSMG_DEGREE_CHAR	'\\'
-#  define SLSMG_PLMINUS_CHAR	'#'
-#  define SLSMG_BULLET_CHAR	'o'
-#  define SLSMG_LARROW_CHAR	'<'
-#  define SLSMG_RARROW_CHAR	'>'
-#  define SLSMG_DARROW_CHAR	'v'
-#  define SLSMG_UARROW_CHAR	'^'
-#  define SLSMG_BOARD_CHAR	'#'
-#  define SLSMG_BLOCK_CHAR	'#'
-# else
-#  define SLSMG_HLINE_CHAR	'q'
-#  define SLSMG_VLINE_CHAR	'x'
-#  define SLSMG_ULCORN_CHAR	'l'
-#  define SLSMG_URCORN_CHAR	'k'
-#  define SLSMG_LLCORN_CHAR	'm'
-#  define SLSMG_LRCORN_CHAR	'j'
-#  define SLSMG_CKBRD_CHAR	'a'
-#  define SLSMG_RTEE_CHAR	'u'
-#  define SLSMG_LTEE_CHAR	't'
-#  define SLSMG_UTEE_CHAR	'w'
-#  define SLSMG_DTEE_CHAR	'v'
-#  define SLSMG_PLUS_CHAR	'n'
-#  define SLSMG_DIAMOND_CHAR	'`'
-#  define SLSMG_DEGREE_CHAR	'f'
-#  define SLSMG_PLMINUS_CHAR	'g'
-#  define SLSMG_BULLET_CHAR	'~'
-#  define SLSMG_LARROW_CHAR	','
-#  define SLSMG_RARROW_CHAR	'+'
-#  define SLSMG_DARROW_CHAR	'.'
-#  define SLSMG_UARROW_CHAR	'-'
-#  define SLSMG_BOARD_CHAR	'h'
-#  define SLSMG_BLOCK_CHAR	'0'
-# endif				       /* AMIGA */
-#endif				       /* IBMPC_SYSTEM */
-
-#ifndef IBMPC_SYSTEM
-# define SLSMG_COLOR_BLACK		0x000000
-# define SLSMG_COLOR_RED		0x000001
-# define SLSMG_COLOR_GREEN		0x000002
-# define SLSMG_COLOR_BROWN		0x000003
-# define SLSMG_COLOR_BLUE		0x000004
-# define SLSMG_COLOR_MAGENTA		0x000005
-# define SLSMG_COLOR_CYAN		0x000006
-# define SLSMG_COLOR_LGRAY		0x000007
-# define SLSMG_COLOR_GRAY		0x000008
-# define SLSMG_COLOR_BRIGHT_RED		0x000009
-# define SLSMG_COLOR_BRIGHT_GREEN	0x00000A
-# define SLSMG_COLOR_BRIGHT_BROWN	0x00000B
-# define SLSMG_COLOR_BRIGHT_BLUE	0x00000C
-# define SLSMG_COLOR_BRIGHT_CYAN	0x00000D
-# define SLSMG_COLOR_BRIGHT_MAGENTA	0x00000E
-# define SLSMG_COLOR_BRIGHT_WHITE	0x00000F
-#endif
-
-typedef struct
-{
-   void (*tt_normal_video)(void);
-   void (*tt_set_scroll_region)(int, int);
-   void (*tt_goto_rc)(int, int);
-   void (*tt_reverse_index)(int);
-   void (*tt_reset_scroll_region)(void);
-   void (*tt_delete_nlines)(int);
-   void (*tt_cls) (void);
-   void (*tt_del_eol) (void);
-   void (*tt_smart_puts) (SLsmg_Char_Type *, SLsmg_Char_Type *, int, int);
-   int (*tt_flush_output) (void);
-   int (*tt_reset_video) (void);
-   int (*tt_init_video) (void);
-
-   int *tt_screen_rows;
-   int *tt_screen_cols;
-
-   int *tt_term_cannot_scroll;
-   int *tt_has_alt_charset;
-   int *tt_use_blink_for_acs;
-   char **tt_graphic_char_pairs;
-
-   long reserved[4];
-}
-SLsmg_Term_Type;
-extern void SLsmg_set_terminal_info (SLsmg_Term_Type *);
-
-/*}}}*/
-
-/*{{{ SLang Keypad Interface */
-
-#define SL_KEY_ERR		0xFFFF
-
-#define SL_KEY_UP		0x101
-#define SL_KEY_DOWN		0x102
-#define SL_KEY_LEFT		0x103
-#define SL_KEY_RIGHT		0x104
-#define SL_KEY_PPAGE		0x105
-#define SL_KEY_NPAGE		0x106
-#define SL_KEY_HOME		0x107
-#define SL_KEY_END		0x108
-#define SL_KEY_A1		0x109
-#define SL_KEY_A3		0x10A
-#define SL_KEY_B2		0x10B
-#define SL_KEY_C1		0x10C
-#define SL_KEY_C3		0x10D
-#define SL_KEY_REDO		0x10E
-#define SL_KEY_UNDO		0x10F
-#define SL_KEY_BACKSPACE	0x110
-#define SL_KEY_ENTER		0x111
-#define SL_KEY_IC		0x112
-#define SL_KEY_DELETE		0x113
-
-#define SL_KEY_F0		0x200
-#define SL_KEY_F(X)		(SL_KEY_F0 + X)
-
-/* I do not intend to use keysymps > 0x1000.  Applications can use those. */
-/* Returns 0 upon success or -1 upon error. */
-extern int SLkp_define_keysym (char *, unsigned int);
-
-/* This function must be called AFTER SLtt_get_terminfo and not before. */
-extern int SLkp_init (void);
-
-/* This function uses SLang_getkey and assumes that what ever initialization
- * is required for SLang_getkey has been performed.
- */
-extern int SLkp_getkey (void);
-
-/*}}}*/
-
-/*{{{ SLang Scroll Interface */
-
-typedef struct _SLscroll_Type
-{
-   struct _SLscroll_Type *next;
-   struct _SLscroll_Type *prev;
-   unsigned int flags;
-}
-SLscroll_Type;
-
-typedef struct
-{
-   unsigned int flags;
-   SLscroll_Type *top_window_line;   /* list element at top of window */
-   SLscroll_Type *bot_window_line;   /* list element at bottom of window */
-   SLscroll_Type *current_line;    /* current list element */
-   SLscroll_Type *lines;	       /* first list element */
-   unsigned int nrows;		       /* number of rows in window */
-   unsigned int hidden_mask;	       /* applied to flags in SLscroll_Type */
-   unsigned int line_num;	       /* current line number (visible) */
-   unsigned int num_lines;	       /* total number of lines (visible) */
-   unsigned int window_row;	       /* row of current_line in window */
-   unsigned int border;		       /* number of rows that form scroll border */
-   int cannot_scroll;		       /* should window scroll or recenter */
-}
-SLscroll_Window_Type;
-
-extern int SLscroll_find_top (SLscroll_Window_Type *);
-extern int SLscroll_find_line_num (SLscroll_Window_Type *);
-extern unsigned int SLscroll_next_n (SLscroll_Window_Type *, unsigned int);
-extern unsigned int SLscroll_prev_n (SLscroll_Window_Type *, unsigned int);
-extern int SLscroll_pageup (SLscroll_Window_Type *);
-extern int SLscroll_pagedown (SLscroll_Window_Type *);
-
-/*}}}*/
-
-/*{{{ Signal Routines */
-
-typedef void SLSig_Fun_Type (int);
-extern SLSig_Fun_Type *SLsignal (int, SLSig_Fun_Type *);
-extern SLSig_Fun_Type *SLsignal_intr (int, SLSig_Fun_Type *);
-extern int SLsig_block_signals (void);
-extern int SLsig_unblock_signals (void);
-extern int SLsystem (char *);
-
-extern char *SLerrno_strerror (int);
-extern int SLerrno_set_errno (int);
-
-/*}}}*/
-
-/*{{{ Interpreter Macro Definitions */
-
-/* The definitions here are for objects that may be on the run-time stack.
- * They are actually sub_types of literal and data main_types.  The actual
- * numbers are historical.
- */
-#define SLANG_UNDEFINED_TYPE	0x00   /* MUST be 0 */
-#define SLANG_VOID_TYPE		0x01   /* also matches ANY type */
-#define SLANG_INT_TYPE 		0x02
-#define SLANG_DOUBLE_TYPE	0x03
-#define SLANG_CHAR_TYPE		0x04
-#define SLANG_INTP_TYPE		0x05
-/* An object of SLANG_INTP_TYPE should never really occur on the stack.  Rather,
- * the integer to which it refers will be there instead.  It is defined here
- * because it is a valid type for MAKE_VARIABLE.
- */
-#define SLANG_REF_TYPE		0x06
-/* SLANG_REF_TYPE refers to an object on the stack that is a pointer (reference)
- * to some other object.
- */
-#define SLANG_COMPLEX_TYPE	0x07
-#define SLANG_NULL_TYPE		0x08
-#define SLANG_UCHAR_TYPE	0x09
-#define SLANG_SHORT_TYPE	0x0A
-#define SLANG_USHORT_TYPE	0x0B
-#define SLANG_UINT_TYPE		0x0C
-#define SLANG_LONG_TYPE		0x0D
-#define SLANG_ULONG_TYPE	0x0E
-#define SLANG_STRING_TYPE	0x0F
-#define SLANG_FLOAT_TYPE	0x10
-#define SLANG_STRUCT_TYPE	0x11
-#define SLANG_ISTRUCT_TYPE 	0x12
-#define SLANG_ARRAY_TYPE	0x20
-#define SLANG_DATATYPE_TYPE	0x21
-#define SLANG_FILE_PTR_TYPE	0x22
-#define SLANG_ASSOC_TYPE	0x23
-#define SLANG_ANY_TYPE		0x24
-#define SLANG_BSTRING_TYPE	0x25
-#define SLANG_FILE_FD_TYPE	0x26
-
-/* Compatibility */
-#ifdef FLOAT_TYPE
-# undef FLOAT_TYPE
-#endif
-#define VOID_TYPE SLANG_VOID_TYPE
-#define INT_TYPE SLANG_INT_TYPE
-#define INTP_TYPE SLANG_INTP_TYPE
-#define FLOAT_TYPE SLANG_DOUBLE_TYPE
-#define ARRAY_TYPE SLANG_ARRAY_TYPE
-#define CHAR_TYPE SLANG_CHAR_TYPE
-#define STRING_TYPE SLANG_STRING_TYPE
-
-/* I am reserving values greater than or equal to 128 for user applications.
- * The first 127 are reserved for S-Lang.
- */
-
-/* Binary and Unary Subtypes */
-/* Since the application can define new types and can overload the binary
- * and unary operators, these definitions must be present in this file.
- * The current implementation assumes both unary and binary are distinct.
- */
-#define SLANG_PLUS		0x01
-#define SLANG_MINUS		0x02
-#define SLANG_TIMES		0x03
-#define SLANG_DIVIDE		0x04
-#define SLANG_EQ		0x05
-#define SLANG_NE		0x06
-#define SLANG_GT		0x07
-#define SLANG_GE		0x08
-#define SLANG_LT		0x09
-#define SLANG_LE		0x0A
-#define SLANG_POW		0x0B
-#define SLANG_OR		0x0C
-#define SLANG_AND		0x0D
-#define SLANG_BAND		0x0E
-#define SLANG_BOR		0x0F
-#define SLANG_BXOR		0x10
-#define SLANG_SHL		0x11
-#define SLANG_SHR		0x12
-#define SLANG_MOD		0x13
-
-/* UNARY subtypes  (may be overloaded) */
-#define SLANG_PLUSPLUS		0x20
-#define SLANG_MINUSMINUS	0x21
-#define SLANG_ABS		0x22
-#define SLANG_SIGN		0x23
-#define SLANG_SQR		0x24
-#define SLANG_MUL2		0x25
-#define SLANG_CHS		0x26
-#define SLANG_NOT		0x27
-#define SLANG_BNOT		0x28
-
-extern char *SLang_Error_Message;
-
-int SLadd_intrinsic_variable (char *, VOID_STAR, unsigned char, int);
-int SLadd_intrinsic_function (char *, FVOID_STAR, unsigned char, unsigned int,...);
-
-int SLns_add_intrinsic_variable (SLang_NameSpace_Type *, char *, VOID_STAR, unsigned char, int);
-int SLns_add_intrinsic_function (SLang_NameSpace_Type *, char *, FVOID_STAR, unsigned char, unsigned int,...);
-
-extern void SLadd_at_handler (long *, char *);
-
-#define MAKE_INTRINSIC_N(n,f,out,in,a1,a2,a3,a4,a5,a6,a7) \
-    {(n), NULL, SLANG_INTRINSIC, (FVOID_STAR) (f), \
-      {a1,a2,a3,a4,a5,a6,a7}, (in), (out)}
-
-#define MAKE_INTRINSIC_7(n,f,out,a1,a2,a3,a4,a5,a6,a7) \
-    MAKE_INTRINSIC_N(n,f,out,7,a1,a2,a3,a4,a5,a6,a7)
-#define MAKE_INTRINSIC_6(n,f,out,a1,a2,a3,a4,a5,a6) \
-    MAKE_INTRINSIC_N(n,f,out,6,a1,a2,a3,a4,a5,a6,0)
-#define MAKE_INTRINSIC_5(n,f,out,a1,a2,a3,a4,a5) \
-    MAKE_INTRINSIC_N(n,f,out,5,a1,a2,a3,a4,a5,0,0)
-#define MAKE_INTRINSIC_4(n,f,out,a1,a2,a3,a4) \
-    MAKE_INTRINSIC_N(n,f,out,4,a1,a2,a3,a4,0,0,0)
-#define MAKE_INTRINSIC_3(n,f,out,a1,a2,a3) \
-    MAKE_INTRINSIC_N(n,f,out,3,a1,a2,a3,0,0,0,0)
-#define MAKE_INTRINSIC_2(n,f,out,a1,a2) \
-    MAKE_INTRINSIC_N(n,f,out,2,a1,a2,0,0,0,0,0)
-#define MAKE_INTRINSIC_1(n,f,out,a1) \
-    MAKE_INTRINSIC_N(n,f,out,1,a1,0,0,0,0,0,0)
-#define MAKE_INTRINSIC_0(n,f,out) \
-    MAKE_INTRINSIC_N(n,f,out,0,0,0,0,0,0,0,0)
-
-#define MAKE_INTRINSIC_S(n,f,r) \
-   MAKE_INTRINSIC_1(n,f,r,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_I(n,f,r) \
-   MAKE_INTRINSIC_1(n,f,r,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC_SS(n,f,r) \
-   MAKE_INTRINSIC_2(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SI(n,f,r) \
-   MAKE_INTRINSIC_2(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_IS(n,f,r) \
-   MAKE_INTRINSIC_2(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_II(n,f,r) \
-   MAKE_INTRINSIC_2(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC_SSS(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SSI(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_SIS(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_SII(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_STRING_TYPE,SLANG_INT_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_ISS(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_ISI(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_STRING_TYPE,SLANG_INT_TYPE)
-#define MAKE_INTRINSIC_IIS(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE,SLANG_STRING_TYPE)
-#define MAKE_INTRINSIC_III(n,f,r) \
-   MAKE_INTRINSIC_3(n,f,r,SLANG_INT_TYPE,SLANG_INT_TYPE,SLANG_INT_TYPE)
-
-#define MAKE_INTRINSIC(n, f, out, in) \
-    MAKE_INTRINSIC_N(n,f,out,in,0,0,0,0,0,0,0)
-
-#define MAKE_VARIABLE(n, v, t, r)     \
-    {n, NULL, SLANG_IVARIABLE + (r), (VOID_STAR)(v), (t)}
-
-#define MAKE_APP_UNARY(n,op) \
-    {(n), NULL, SLANG_APP_UNARY, (op)}
-
-#define MAKE_MATH_UNARY(n,op) \
-    {(n), NULL, SLANG_MATH_UNARY, (op)}
-
-#define MAKE_ICONSTANT(n,val) \
-    {(n),NULL, SLANG_ICONSTANT, (val)}
-
-#define MAKE_DCONSTANT(n,val) \
-    {(n),NULL, SLANG_DCONSTANT, (val)}
-
-#ifndef offsetof
-# define offsetof(T,F) ((unsigned int)((char *)&((T *)0L)->F - (char *)0L))
-#endif
-#define MAKE_ISTRUCT_FIELD(s,f,n,t,r) {(n), offsetof(s,f), (t), (r)}
-
-#define SLANG_END_TABLE {NULL}
-#define SLANG_END_INTRIN_FUN_TABLE MAKE_INTRINSIC_0(NULL,NULL,0)
-#define SLANG_END_DCONST_TABLE MAKE_DCONSTANT(NULL,0)
-#define SLANG_END_MATH_UNARY_TABLE MAKE_MATH_UNARY(NULL,0)
-#define SLANG_END_INTRIN_VAR_TABLE MAKE_VARIABLE(NULL,NULL,0,0)
-#define SLANG_END_ICONST_TABLE MAKE_ICONSTANT(NULL,0)
-#define SLANG_END_ISTRUCT_TABLE {NULL, 0, 0, 0}
-
-   
-
-/*}}}*/
-
-/*{{{ Upper/Lowercase Functions */
-
-extern void SLang_define_case(int *, int *);
-extern void SLang_init_case_tables (void);
-
-extern unsigned char _SLChg_UCase_Lut[256];
-extern unsigned char _SLChg_LCase_Lut[256];
-#define UPPER_CASE(x) (_SLChg_UCase_Lut[(unsigned char) (x)])
-#define LOWER_CASE(x) (_SLChg_LCase_Lut[(unsigned char) (x)])
-#define CHANGE_CASE(x) (((x) == _SLChg_LCase_Lut[(unsigned char) (x)]) ?\
-			_SLChg_UCase_Lut[(unsigned char) (x)] : _SLChg_LCase_Lut[(unsigned char) (x)])
-
-/*}}}*/
-
-/*{{{ Regular Expression Interface */
-
-typedef struct
-{
-   /* These must be set by calling routine. */
-   unsigned char *pat;		       /* regular expression pattern */
-   unsigned char *buf;		       /* buffer for compiled regexp */
-   unsigned int buf_len;	       /* length of buffer */
-   int case_sensitive;		       /* 1 if match is case sensitive  */
-
-   /* The rest are set by SLang_regexp_compile */
-
-   int must_match;		       /* 1 if line must contain substring */
-   int must_match_bol;		       /* true if it must match beginning of line */
-   unsigned char must_match_str[16];   /* 15 char null term substring */
-   int osearch;			       /* 1 if ordinary search suffices */
-   unsigned int min_length;	       /* minimum length the match must be */
-   int beg_matches[10];		       /* offset of start of \( */
-   unsigned int end_matches[10];       /* length of nth submatch
-					* Note that the entire match corresponds
-					* to \0
-					*/
-   int offset;			       /* offset to be added to beg_matches */
-   int reserved[10];
-} SLRegexp_Type;
-
-extern unsigned char *SLang_regexp_match(unsigned char *,
-					 unsigned int,
-					 SLRegexp_Type *);
-
-/* Returns 0 upon success.  If failure, the offset into the
- * pattern is returned (start = 1).
- */
-extern int SLang_regexp_compile (SLRegexp_Type *);
-extern char *SLregexp_quote_string (char *, char *, unsigned int);
-
-/*}}}*/
-
-/*{{{ SLang Command Interface */
-
-struct _SLcmd_Cmd_Type; /* Pre-declaration is needed below */
-typedef struct
-{
-   struct _SLcmd_Cmd_Type *table;
-   int argc;
-   /* Version 2.0 needs to use a union!! */
-   char **string_args;
-   int *int_args;
-   double *double_args;
-   unsigned char *arg_type;
-   unsigned long reserved[4];
-} SLcmd_Cmd_Table_Type;
-
-typedef struct _SLcmd_Cmd_Type
-{
-   int (*cmdfun)(int, SLcmd_Cmd_Table_Type *);
-   char *cmd;
-   char *arg_type;
-} SLcmd_Cmd_Type;
-
-extern int SLcmd_execute_string (char *, SLcmd_Cmd_Table_Type *);
-
-/*}}}*/
-
-/*{{{ SLang Search Interface */
-
-typedef struct
-{
-   int cs;			       /* case sensitive */
-   unsigned char key[256];
-   int ind[256];
-   int key_len;
-   int dir;
-} SLsearch_Type;
-
-extern int SLsearch_init (char *, int, int, SLsearch_Type *);
-/* This routine must first be called before any search can take place.
- * The second parameter specifies the direction of the search: greater than
- * zero for a forwrd search and less than zero for a backward search.  The
- * third parameter specifies whether the search is case sensitive or not.
- * The last parameter is a pointer to a structure that is filled by this
- * function and it is this structure that must be passed to SLsearch.
- */
-
-extern unsigned char *SLsearch (unsigned char *, unsigned char *, SLsearch_Type *);
-/* To use this routine, you must first call 'SLsearch_init'.  Then the first
- * two parameters p1 and p2 serve to define the region over which the search
- * is to take place.  The third parameter is the structure that was previously
- * initialized by SLsearch_init.
- *
- * The routine returns a pointer to the match if found otherwise it returns
- * NULL.
- */
-
-/*}}}*/
-
-/*{{{ SLang Pathname Interface */
-
-/* These function return pointers to the original space */
-extern char *SLpath_basename (char *);
-extern char *SLpath_extname (char *);
-extern int SLpath_is_absolute_path (char *);
-
-/* These return malloced strings--- NOT slstrings */
-extern char *SLpath_dircat (char *, char *);
-extern char *SLpath_find_file_in_path (char *, char *);
-extern char *SLpath_dirname (char *);
-extern int SLpath_file_exists (char *);
-extern char *SLpath_pathname_sans_extname (char *);
-
-/*}}}*/
-
-extern int SLang_set_module_load_path (char *);
-
-#define SLANG_MODULE(name) \
-   extern int init_##name##_module_ns (char *); \
-   extern void deinit_##name##_module (void)
-
-#if 0
-{
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-#endif  /* _DAVIS_SLANG_H_ */
diff --git a/mdk-stage1/slang/slarith.c b/mdk-stage1/slang/slarith.c
deleted file mode 100644
index 07ad68687..000000000
--- a/mdk-stage1/slang/slarith.c
+++ /dev/null
@@ -1,1656 +0,0 @@
-
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <math.h>
-
-#ifdef HAVE_LOCALE_H
-# include <locale.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*
- * This file defines binary and unary operations on all integer types.
- * Supported types include:
- *
- *    SLANG_CHAR_TYPE     (char)
- *    SLANG_SHORT_TYPE    (short)
- *    SLANG_INT_TYPE      (int)
- *    SLANG_LONG_TYPE     (long)
- *    SLANG_FLOAT_TYPE    (float)
- *    SLANG_DOUBLE_TYPE   (double)
- *
- * as well as unsigned types.  The result-type of an arithmentic operation
- * will depend upon the data types involved.  I am going to distinguish
- * between the boolean operations such as `and' and `or' from the arithmetic
- * operations such as `plus'.  Since the result of a boolean operation is
- * either 1 or 0, a boolean result will be represented by SLANG_CHAR_TYPE.
- * Ordinarily I would use an integer but for arrays it makes more sense to
- * use a character data type.
- *
- * So, the following will be assumed (`+' is any arithmetic operator)
- *
- *    char + char = int
- *    char|short + short = int
- *    char|short|int + int = int
- *    char|short|int|long + long = long
- *    char|short|int|long|float + float = float
- *    char|short|int|long|float|double + double = double
- *
- * In the actual implementation, a brute force approach is avoided.  Such
- * an approach would mean defining different functions for all possible
- * combinations of types.  Including the unsigned types, and not including
- * the complex number type, there are 10 arithmetic types and 10*10=100
- * different combinations of types.  Clearly this would be too much.
- *
- * One approach would be to define binary functions only between operands of
- * the same type and then convert types as appropriate.  This would require
- * just 6 such functions (int, uint, long, ulong, float, double).
- * However, many conversion functions are going to be required, particularly
- * since we are going to allow typecasting from one arithmetic to another.
- * Since the bit pattern of signed and unsigned types are the same, and only
- * the interpretation differs, there will be no functions to convert between
- * signed and unsigned forms of a given type.
- */
-
-#define MAX_ARITHMETIC_TYPES	10
-
-unsigned char _SLarith_Is_Arith_Type [256];
-
-unsigned char _SLarith_Arith_Types[] =
-{
-   SLANG_CHAR_TYPE,
-   SLANG_UCHAR_TYPE,
-   SLANG_SHORT_TYPE,
-   SLANG_USHORT_TYPE,
-   SLANG_INT_TYPE,
-   SLANG_UINT_TYPE,
-   SLANG_LONG_TYPE,
-   SLANG_ULONG_TYPE,
-   SLANG_FLOAT_TYPE,
-   SLANG_DOUBLE_TYPE,
-   0
-};
-
-/* Here are a bunch of functions to convert from one type to another.  To
- * facilitate the process, a macros will be used.
- */
-
-#define DEFUN_1(f,from_type,to_type) \
-static void f (to_type *y, from_type *x, unsigned int n) \
-{ \
-   unsigned int i; \
-   for (i = 0; i < n; i++) y[i] = (to_type) x[i]; \
-}
-
-#define DEFUN_2(f,from_type,to_type,copy_fun) \
-static VOID_STAR f (VOID_STAR xp, unsigned int n) \
-{ \
-   from_type *x; \
-   to_type *y; \
-   x = (from_type *) xp; \
-   if (NULL == (y = (to_type *) SLmalloc (sizeof (to_type) * n))) return NULL; \
-   copy_fun (y, x, n); \
-   return (VOID_STAR) y; \
-}
-typedef VOID_STAR (*Convert_Fun_Type)(VOID_STAR, unsigned int);
-
-DEFUN_1(copy_char_to_char,char,char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_char_to_short,char,short)
-DEFUN_1(copy_char_to_ushort,char,unsigned short)
-#else
-# define copy_char_to_short	copy_char_to_int
-# define copy_char_to_ushort	copy_char_to_uint
-#endif
-DEFUN_1(copy_char_to_int,char,int)
-DEFUN_1(copy_char_to_uint,char,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_char_to_long,char,long)
-DEFUN_1(copy_char_to_ulong,char,unsigned long)
-#else
-# define copy_char_to_long	copy_char_to_int
-# define copy_char_to_ulong	copy_char_to_uint
-#endif
-DEFUN_1(copy_char_to_float,char,float)
-DEFUN_1(copy_char_to_double,char,double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_uchar_to_short,unsigned char,short)
-DEFUN_1(copy_uchar_to_ushort,unsigned char,unsigned short)
-#else
-# define copy_uchar_to_short	copy_uchar_to_int
-# define copy_uchar_to_ushort	copy_uchar_to_uint
-#endif
-DEFUN_1(copy_uchar_to_int,unsigned char,int)
-DEFUN_1(copy_uchar_to_uint,unsigned char,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_uchar_to_long,unsigned char,long)
-DEFUN_1(copy_uchar_to_ulong,unsigned char,unsigned long)
-#else
-# define copy_uchar_to_long	copy_uchar_to_int
-# define copy_uchar_to_ulong	copy_uchar_to_uint
-#endif
-DEFUN_1(copy_uchar_to_float,unsigned char,float)
-DEFUN_1(copy_uchar_to_double,unsigned char,double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_short_to_char,short,char)
-DEFUN_1(copy_short_to_uchar,short,unsigned char)
-DEFUN_1(copy_short_to_short,short,short)
-DEFUN_1(copy_short_to_int,short,int)
-DEFUN_1(copy_short_to_uint,short,unsigned int)
-DEFUN_1(copy_short_to_long,short,long)
-DEFUN_1(copy_short_to_ulong,short,unsigned long)
-DEFUN_1(copy_short_to_float,short,float)
-DEFUN_1(copy_short_to_double,short,double)
-DEFUN_1(copy_ushort_to_char,unsigned short,char)
-DEFUN_1(copy_ushort_to_uchar,unsigned short,unsigned char)
-DEFUN_1(copy_ushort_to_int,unsigned short,int)
-DEFUN_1(copy_ushort_to_uint,unsigned short,unsigned int)
-DEFUN_1(copy_ushort_to_long,unsigned short,long)
-DEFUN_1(copy_ushort_to_ulong,unsigned short,unsigned long)
-DEFUN_1(copy_ushort_to_float,unsigned short,float)
-DEFUN_1(copy_ushort_to_double,unsigned short,double)
-#else
-# define copy_short_to_char	copy_int_to_char
-# define copy_short_to_uchar	copy_int_to_uchar
-# define copy_short_to_short	copy_int_to_int
-# define copy_short_to_int	copy_int_to_int
-# define copy_short_to_uint	copy_int_to_int
-# define copy_short_to_long	copy_int_to_long
-# define copy_short_to_ulong	copy_int_to_ulong
-# define copy_short_to_float	copy_int_to_float
-# define copy_short_to_double	copy_int_to_double
-# define copy_ushort_to_char	copy_uint_to_char
-# define copy_ushort_to_uchar	copy_uint_to_uchar
-# define copy_ushort_to_int	copy_int_to_int
-# define copy_ushort_to_uint	copy_int_to_int
-# define copy_ushort_to_long	copy_uint_to_long
-# define copy_ushort_to_ulong	copy_uint_to_ulong
-# define copy_ushort_to_float	copy_uint_to_float
-# define copy_ushort_to_double	copy_uint_to_double
-#endif
-
-DEFUN_1(copy_int_to_char,int,char)
-DEFUN_1(copy_int_to_uchar,int,unsigned char)
-DEFUN_1(copy_uint_to_char,unsigned int,char)
-DEFUN_1(copy_uint_to_uchar,unsigned int,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_int_to_short,int,short)
-DEFUN_1(copy_int_to_ushort,int,unsigned short)
-DEFUN_1(copy_uint_to_short,unsigned int,short)
-DEFUN_1(copy_uint_to_ushort,unsigned int,unsigned short)
-#else
-# define copy_int_to_short	copy_int_to_int
-# define copy_int_to_ushort	copy_int_to_int
-# define copy_uint_to_short	copy_int_to_int
-# define copy_uint_to_ushort	copy_int_to_int
-#endif
-DEFUN_1(copy_int_to_int,int,int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_int_to_long,int,long)
-DEFUN_1(copy_int_to_ulong,int,unsigned long)
-DEFUN_1(copy_uint_to_long,unsigned int,long)
-DEFUN_1(copy_uint_to_ulong,unsigned int,unsigned long)
-#else
-# define copy_int_to_long	copy_int_to_int
-# define copy_int_to_ulong	copy_int_to_int
-# define copy_uint_to_long	copy_int_to_int
-# define copy_uint_to_ulong	copy_int_to_int
-#endif
-DEFUN_1(copy_int_to_float,int,float)
-DEFUN_1(copy_int_to_double,int,double)
-DEFUN_1(copy_uint_to_float,unsigned int,float)
-DEFUN_1(copy_uint_to_double,unsigned int,double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_long_to_char,long,char)
-DEFUN_1(copy_long_to_uchar,long,unsigned char)
-DEFUN_1(copy_long_to_short,long,short)
-DEFUN_1(copy_long_to_ushort,long,unsigned short)
-DEFUN_1(copy_long_to_int,long,int)
-DEFUN_1(copy_long_to_uint,long,unsigned int)
-DEFUN_1(copy_long_to_long,long,long)
-DEFUN_1(copy_long_to_float,long,float)
-DEFUN_1(copy_long_to_double,long,double)
-DEFUN_1(copy_ulong_to_char,unsigned long,char)
-DEFUN_1(copy_ulong_to_uchar,unsigned long,unsigned char)
-DEFUN_1(copy_ulong_to_short,unsigned long,short)
-DEFUN_1(copy_ulong_to_ushort,unsigned long,unsigned short)
-DEFUN_1(copy_ulong_to_int,unsigned long,int)
-DEFUN_1(copy_ulong_to_uint,unsigned long,unsigned int)
-DEFUN_1(copy_ulong_to_float,unsigned long,float)
-DEFUN_1(copy_ulong_to_double,unsigned long,double)
-#else
-#define copy_long_to_char	copy_int_to_char
-#define copy_long_to_uchar	copy_int_to_uchar
-#define copy_long_to_short	copy_int_to_short
-#define copy_long_to_ushort	copy_int_to_ushort
-#define copy_long_to_int	copy_int_to_int
-#define copy_long_to_uint	copy_int_to_int
-#define copy_long_to_long	copy_int_to_int
-#define copy_long_to_float	copy_int_to_float
-#define copy_long_to_double	copy_int_to_double
-#define copy_ulong_to_char	copy_uint_to_char
-#define copy_ulong_to_uchar	copy_uint_to_uchar
-#define copy_ulong_to_short	copy_uint_to_short
-#define copy_ulong_to_ushort	copy_uint_to_ushort
-#define copy_ulong_to_int	copy_int_to_int
-#define copy_ulong_to_uint	copy_int_to_int
-#define copy_ulong_to_float	copy_uint_to_float
-#define copy_ulong_to_double	copy_uint_to_double
-#endif
-
-DEFUN_1(copy_float_to_char,float,char)
-DEFUN_1(copy_float_to_uchar,float,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_float_to_short,float,short)
-DEFUN_1(copy_float_to_ushort,float,unsigned short)
-#else
-# define copy_float_to_short	copy_float_to_int
-# define copy_float_to_ushort	copy_float_to_uint
-#endif
-DEFUN_1(copy_float_to_int,float,int)
-DEFUN_1(copy_float_to_uint,float,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_float_to_long,float,long)
-DEFUN_1(copy_float_to_ulong,float,unsigned long)
-#else
-# define copy_float_to_long	copy_float_to_int
-# define copy_float_to_ulong	copy_float_to_uint
-#endif
-DEFUN_1(copy_float_to_float,float,float)
-DEFUN_1(copy_float_to_double,float,double)
-
-DEFUN_1(copy_double_to_char,double,char)
-DEFUN_1(copy_double_to_uchar,double,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_1(copy_double_to_short,double,short)
-DEFUN_1(copy_double_to_ushort,double,unsigned short)
-#else
-# define copy_double_to_short	copy_double_to_int
-# define copy_double_to_ushort	copy_double_to_uint
-#endif
-DEFUN_1(copy_double_to_int,double,int)
-DEFUN_1(copy_double_to_uint,double,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_1(copy_double_to_long,double,long)
-DEFUN_1(copy_double_to_ulong,double,unsigned long)
-#else
-# define copy_double_to_long	copy_double_to_int
-# define copy_double_to_ulong	copy_double_to_uint
-#endif
-DEFUN_1(copy_double_to_float,double,float)
-DEFUN_1(copy_double_to_double,double,double)
-
-DEFUN_2(char_to_int,char,int,copy_char_to_int)
-DEFUN_2(char_to_uint,char,unsigned int,copy_char_to_uint)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(char_to_long,char,long,copy_char_to_long)
-DEFUN_2(char_to_ulong,char,unsigned long,copy_char_to_ulong)
-#else
-# define char_to_long	char_to_int
-# define char_to_ulong	char_to_uint
-#endif
-DEFUN_2(char_to_float,char,float,copy_char_to_float)
-DEFUN_2(char_to_double,char,double,copy_char_to_double)
-
-DEFUN_2(uchar_to_int,unsigned char,int,copy_uchar_to_int)
-DEFUN_2(uchar_to_uint,unsigned char,unsigned int,copy_uchar_to_uint)
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(uchar_to_long,unsigned char,long,copy_uchar_to_long)
-DEFUN_2(uchar_to_ulong,unsigned char,unsigned long,copy_uchar_to_ulong)
-#else
-# define uchar_to_long		uchar_to_int
-# define uchar_to_ulong		uchar_to_uint
-#endif
-DEFUN_2(uchar_to_float,unsigned char,float,copy_uchar_to_float)
-DEFUN_2(uchar_to_double,unsigned char,double,copy_uchar_to_double)
-
-#if SIZEOF_INT != SIZEOF_SHORT
-DEFUN_2(short_to_int,short,int,copy_short_to_int)
-DEFUN_2(short_to_uint,short,unsigned int,copy_short_to_uint)
-DEFUN_2(short_to_long,short,long,copy_short_to_long)
-DEFUN_2(short_to_ulong,short,unsigned long,copy_short_to_ulong)
-DEFUN_2(short_to_float,short,float,copy_short_to_float)
-DEFUN_2(short_to_double,short,double,copy_short_to_double)
-DEFUN_2(ushort_to_int,unsigned short,int,copy_ushort_to_int)
-DEFUN_2(ushort_to_uint,unsigned short,unsigned int,copy_ushort_to_uint)
-DEFUN_2(ushort_to_long,unsigned short,long,copy_ushort_to_long)
-DEFUN_2(ushort_to_ulong,unsigned short,unsigned long,copy_ushort_to_ulong)
-DEFUN_2(ushort_to_float,unsigned short,float,copy_ushort_to_float)
-DEFUN_2(ushort_to_double,unsigned short,double,copy_ushort_to_double)
-#else
-# define short_to_int		NULL
-# define short_to_uint		NULL
-# define short_to_long		int_to_long
-# define short_to_ulong		int_to_ulong
-# define short_to_float		int_to_float
-# define short_to_double	int_to_double
-# define ushort_to_int		NULL
-# define ushort_to_uint		NULL
-# define ushort_to_long		uint_to_long
-# define ushort_to_ulong	uint_to_ulong
-# define ushort_to_float	uint_to_float
-# define ushort_to_double	uint_to_double
-#endif
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(int_to_long,int,long,copy_int_to_long)
-DEFUN_2(int_to_ulong,int,unsigned long,copy_int_to_ulong)
-#else
-# define int_to_long		NULL
-# define int_to_ulong		NULL
-#endif
-DEFUN_2(int_to_float,int,float,copy_int_to_float)
-DEFUN_2(int_to_double,int,double,copy_int_to_double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(uint_to_long,unsigned int,long,copy_uint_to_long)
-DEFUN_2(uint_to_ulong,unsigned int,unsigned long,copy_uint_to_ulong)
-#else
-# define uint_to_long		NULL
-# define uint_to_ulong		NULL
-#endif
-DEFUN_2(uint_to_float,unsigned int,float,copy_uint_to_float)
-DEFUN_2(uint_to_double,unsigned int,double,copy_uint_to_double)
-
-#if SIZEOF_INT != SIZEOF_LONG
-DEFUN_2(long_to_float,long,float,copy_long_to_float)
-DEFUN_2(long_to_double,long,double,copy_long_to_double)
-DEFUN_2(ulong_to_float,unsigned long,float,copy_ulong_to_float)
-DEFUN_2(ulong_to_double,unsigned long,double,copy_ulong_to_double)
-#else
-# define long_to_float		int_to_float
-# define long_to_double		int_to_double
-# define ulong_to_float		uint_to_float
-# define ulong_to_double	uint_to_double
-#endif
-
-DEFUN_2(float_to_double,float,double,copy_float_to_double)
-
-#define TO_DOUBLE_FUN(name,type) \
-static double name (VOID_STAR x) { return (double) *(type *) x; }
-TO_DOUBLE_FUN(char_to_one_double,char)
-TO_DOUBLE_FUN(uchar_to_one_double,unsigned char)
-#if SIZEOF_INT != SIZEOF_SHORT
-TO_DOUBLE_FUN(short_to_one_double,short)
-TO_DOUBLE_FUN(ushort_to_one_double,unsigned short)
-#else
-# define short_to_one_double	int_to_one_double
-# define ushort_to_one_double	uint_to_one_double
-#endif
-TO_DOUBLE_FUN(int_to_one_double,int)
-TO_DOUBLE_FUN(uint_to_one_double,unsigned int)
-#if SIZEOF_INT != SIZEOF_LONG
-TO_DOUBLE_FUN(long_to_one_double,long)
-TO_DOUBLE_FUN(ulong_to_one_double,unsigned long)
-#else
-# define long_to_one_double	int_to_one_double
-# define ulong_to_one_double	uint_to_one_double
-#endif
-TO_DOUBLE_FUN(float_to_one_double,float)
-TO_DOUBLE_FUN(double_to_one_double,double)
-
-SLang_To_Double_Fun_Type
-SLarith_get_to_double_fun (unsigned char type, unsigned int *sizeof_type)
-{
-   unsigned int da;
-   SLang_To_Double_Fun_Type to_double;
-
-   switch (type)
-     {
-      default:
-	return NULL;
-
-      case SLANG_CHAR_TYPE:
-	da = sizeof (char); to_double = char_to_one_double;
-	break;
-      case SLANG_UCHAR_TYPE:
-	da = sizeof (unsigned char); to_double = uchar_to_one_double;
-	break;
-      case SLANG_SHORT_TYPE:
-	da = sizeof (short); to_double = short_to_one_double;
-	break;
-      case SLANG_USHORT_TYPE:
-	da = sizeof (unsigned short); to_double = ushort_to_one_double;
-	break;
-      case SLANG_INT_TYPE:
-	da = sizeof (int); to_double = int_to_one_double;
-	break;
-      case SLANG_UINT_TYPE:
-	da = sizeof (unsigned int); to_double = uint_to_one_double;
-	break;
-      case SLANG_LONG_TYPE:
-	da = sizeof (long); to_double = long_to_one_double;
-	break;
-      case SLANG_ULONG_TYPE:
-	da = sizeof (unsigned long); to_double = ulong_to_one_double;
-	break;
-      case SLANG_FLOAT_TYPE:
-	da = sizeof (float); to_double = float_to_one_double;
-	break;
-     case SLANG_DOUBLE_TYPE:
-	da = sizeof (double); to_double = double_to_one_double;
-	break;
-     }
-
-   if (sizeof_type != NULL) *sizeof_type = da;
-   return to_double;
-}
-
-/* Each element of the matrix determines how the row maps onto the column.
- * That is, let the matrix be B_ij.  Where the i,j indices refer to
- * precedence of the type.  Then,
- * B_ij->copy_function copies type i to type j.  Similarly,
- * B_ij->convert_function mallocs a new array of type j and copies i to it.
- *
- * Since types are always converted to higher levels of precedence for binary
- * operations, many of the elements are NULL.
- *
- * Is the idea clear?
- */
-typedef struct
-{
-   FVOID_STAR copy_function;
-   Convert_Fun_Type convert_function;
-}
-Binary_Matrix_Type;
-
-static Binary_Matrix_Type Binary_Matrix [MAX_ARITHMETIC_TYPES][MAX_ARITHMETIC_TYPES] =
-{
-     {
-	  {(FVOID_STAR)copy_char_to_char, NULL},
-	  {(FVOID_STAR)copy_char_to_char, NULL},
-	{(FVOID_STAR) copy_char_to_short, NULL},
-	{(FVOID_STAR) copy_char_to_ushort, NULL},
-	{(FVOID_STAR) copy_char_to_int, char_to_int},
-	{(FVOID_STAR) copy_char_to_uint, char_to_uint},
-	{(FVOID_STAR) copy_char_to_long, char_to_long},
-	{(FVOID_STAR) copy_char_to_ulong, char_to_ulong},
-	{(FVOID_STAR) copy_char_to_float, char_to_float},
-	{(FVOID_STAR) copy_char_to_double, char_to_double},
-     },
-
-     {
-	  {(FVOID_STAR)copy_char_to_char, NULL},
-	  {(FVOID_STAR)copy_char_to_char, NULL},
-	{(FVOID_STAR) copy_uchar_to_short, NULL},
-	{(FVOID_STAR) copy_uchar_to_ushort, NULL},
-	{(FVOID_STAR) copy_uchar_to_int, uchar_to_int},
-	{(FVOID_STAR) copy_uchar_to_uint, uchar_to_uint},
-	{(FVOID_STAR) copy_uchar_to_long, uchar_to_long},
-	{(FVOID_STAR) copy_uchar_to_ulong, uchar_to_ulong},
-	{(FVOID_STAR) copy_uchar_to_float, uchar_to_float},
-	{(FVOID_STAR) copy_uchar_to_double, uchar_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_short_to_char, NULL},
-	{(FVOID_STAR) copy_short_to_uchar, NULL},
-	{(FVOID_STAR) copy_short_to_short, NULL},
-	{(FVOID_STAR) copy_short_to_short, NULL},
-	{(FVOID_STAR) copy_short_to_int, short_to_int},
-	{(FVOID_STAR) copy_short_to_uint, short_to_uint},
-	{(FVOID_STAR) copy_short_to_long, short_to_long},
-	{(FVOID_STAR) copy_short_to_ulong, short_to_ulong},
-	{(FVOID_STAR) copy_short_to_float, short_to_float},
-	{(FVOID_STAR) copy_short_to_double, short_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_ushort_to_char, NULL},
-	{(FVOID_STAR) copy_ushort_to_uchar, NULL},
-	{(FVOID_STAR) copy_short_to_short, NULL},
-	{(FVOID_STAR) copy_short_to_short, NULL},
-	{(FVOID_STAR) copy_ushort_to_int, ushort_to_int},
-	{(FVOID_STAR) copy_ushort_to_uint, ushort_to_uint},
-	{(FVOID_STAR) copy_ushort_to_long, ushort_to_long},
-	{(FVOID_STAR) copy_ushort_to_ulong, ushort_to_ulong},
-	{(FVOID_STAR) copy_ushort_to_float, ushort_to_float},
-	{(FVOID_STAR) copy_ushort_to_double, ushort_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_int_to_char, NULL},
-	{(FVOID_STAR) copy_int_to_uchar, NULL},
-	{(FVOID_STAR) copy_int_to_short, NULL},
-	{(FVOID_STAR) copy_int_to_ushort, NULL},
-	{(FVOID_STAR) copy_int_to_int, NULL},
-	{(FVOID_STAR) copy_int_to_int, NULL},
-	{(FVOID_STAR) copy_int_to_long, int_to_long},
-	{(FVOID_STAR) copy_int_to_ulong, int_to_ulong},
-	{(FVOID_STAR) copy_int_to_float, int_to_float},
-	{(FVOID_STAR) copy_int_to_double, int_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_uint_to_char, NULL},
-	{(FVOID_STAR) copy_uint_to_uchar, NULL},
-	{(FVOID_STAR) copy_uint_to_short, NULL},
-	{(FVOID_STAR) copy_uint_to_ushort, NULL},
-	{(FVOID_STAR) copy_int_to_int, NULL},
-	{(FVOID_STAR) copy_int_to_int, NULL},
-	{(FVOID_STAR) copy_uint_to_long, uint_to_long},
-	{(FVOID_STAR) copy_uint_to_ulong, uint_to_ulong},
-	{(FVOID_STAR) copy_uint_to_float, uint_to_float},
-	{(FVOID_STAR) copy_uint_to_double, uint_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_long_to_char, NULL},
-	{(FVOID_STAR) copy_long_to_uchar, NULL},
-	{(FVOID_STAR) copy_long_to_short, NULL},
-	{(FVOID_STAR) copy_long_to_ushort, NULL},
-	{(FVOID_STAR) copy_long_to_int, NULL},
-	{(FVOID_STAR) copy_long_to_uint, NULL},
-	{(FVOID_STAR) copy_long_to_long, NULL},
-	{(FVOID_STAR) copy_long_to_long, NULL},
-	{(FVOID_STAR) copy_long_to_float, long_to_float},
-	{(FVOID_STAR) copy_long_to_double, long_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_ulong_to_char, NULL},
-	{(FVOID_STAR) copy_ulong_to_uchar, NULL},
-	{(FVOID_STAR) copy_ulong_to_short, NULL},
-	{(FVOID_STAR) copy_ulong_to_ushort, NULL},
-	{(FVOID_STAR) copy_ulong_to_int, NULL},
-	{(FVOID_STAR) copy_ulong_to_uint, NULL},
-	{(FVOID_STAR) copy_long_to_long, NULL},
-	{(FVOID_STAR) copy_long_to_long, NULL},
-	{(FVOID_STAR) copy_ulong_to_float, ulong_to_float},
-	{(FVOID_STAR) copy_ulong_to_double, ulong_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_float_to_char, NULL},
-	{(FVOID_STAR) copy_float_to_uchar, NULL},
-	{(FVOID_STAR) copy_float_to_short, NULL},
-	{(FVOID_STAR) copy_float_to_ushort, NULL},
-	{(FVOID_STAR) copy_float_to_int, NULL},
-	{(FVOID_STAR) copy_float_to_uint, NULL},
-	{(FVOID_STAR) copy_float_to_long, NULL},
-	{(FVOID_STAR) copy_float_to_ulong, NULL},
-	{(FVOID_STAR) copy_float_to_float, NULL},
-	{(FVOID_STAR) copy_float_to_double, float_to_double},
-     },
-
-     {
-	{(FVOID_STAR) copy_double_to_char, NULL},
-	{(FVOID_STAR) copy_double_to_uchar, NULL},
-	{(FVOID_STAR) copy_double_to_short, NULL},
-	{(FVOID_STAR) copy_double_to_ushort, NULL},
-	{(FVOID_STAR) copy_double_to_int, NULL},
-	{(FVOID_STAR) copy_double_to_uint, NULL},
-	{(FVOID_STAR) copy_double_to_long, NULL},
-	{(FVOID_STAR) copy_double_to_ulong, NULL},
-	{(FVOID_STAR) copy_double_to_float, NULL},
-	{(FVOID_STAR) copy_double_to_double, NULL},
-     }
-};
-
-#define GENERIC_BINARY_FUNCTION int_int_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE int
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define ABS_FUNCTION abs
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION int_unary_op
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION int_int_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_int_obj(SLANG_INT_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION int_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION uint_uint_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned int
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION uint_unary_op
-#define ABS_FUNCTION(a) (a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define SCALAR_BINARY_FUNCTION uint_uint_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_int_obj(SLANG_UINT_TYPE,(int)(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION uint_cmp_function
-#include "slarith.inc"
-
-#if SIZEOF_LONG != SIZEOF_INT
-#define GENERIC_BINARY_FUNCTION long_long_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE long
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION long_unary_op
-#define ABS_FUNCTION(a) (((a) >= 0) ? (a) : -(a))
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION long_long_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_long_obj(SLANG_LONG_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION long_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION ulong_ulong_bin_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned long
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) ((a) % (b))
-#define GENERIC_UNARY_FUNCTION ulong_unary_op
-#define ABS_FUNCTION(a) (a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define SCALAR_BINARY_FUNCTION ulong_ulong_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_long_obj(SLANG_ULONG_TYPE,(long)(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION ulong_cmp_function
-#include "slarith.inc"
-#else
-#define long_long_bin_op	int_int_bin_op
-#define ulong_ulong_bin_op	uint_uint_bin_op
-#define long_unary_op		int_unary_op
-#define ulong_unary_op		uint_unary_op
-#define long_cmp_function	int_cmp_function
-#define ulong_cmp_function	uint_cmp_function
-#endif				       /* SIZEOF_INT != SIZEOF_LONG */
-
-#define GENERIC_BINARY_FUNCTION float_float_bin_op
-#define GENERIC_TYPE float
-#define POW_FUNCTION(a,b) (float)pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE float
-#define MOD_FUNCTION(a,b) (float)fmod((a),(b))
-#define GENERIC_UNARY_FUNCTION float_unary_op
-#define ABS_FUNCTION(a) (float)fabs((double) a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION float_float_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_float_obj(SLANG_FLOAT_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_float_obj(SLANG_FLOAT_TYPE, (x))
-#define CMP_FUNCTION float_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_BINARY_FUNCTION double_double_bin_op
-#define GENERIC_TYPE double
-#define POW_FUNCTION(a,b) pow((double)(a),(double)(b))
-#define POW_RESULT_TYPE double
-#define MOD_FUNCTION(a,b) (float)fmod((a),(b))
-#define GENERIC_UNARY_FUNCTION double_unary_op
-#define ABS_FUNCTION(a) fabs(a)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define SCALAR_BINARY_FUNCTION double_double_scalar_bin_op
-#define PUSH_SCALAR_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE,(x))
-#define PUSH_POW_OBJ_FUN(x) SLclass_push_double_obj(SLANG_DOUBLE_TYPE, (x))
-#define CMP_FUNCTION double_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION char_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE signed char
-#define ABS_FUNCTION abs
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define CMP_FUNCTION char_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION uchar_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned char
-#define ABS_FUNCTION(x) (x)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define CMP_FUNCTION uchar_cmp_function
-#include "slarith.inc"
-
-#if SIZEOF_SHORT != SIZEOF_INT
-#define GENERIC_UNARY_FUNCTION short_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE short
-#define ABS_FUNCTION abs
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : (((x) < 0) ? -1 : 0))
-#define CMP_FUNCTION short_cmp_function
-#include "slarith.inc"
-
-#define GENERIC_UNARY_FUNCTION ushort_unary_op
-#define GENERIC_BIT_OPERATIONS
-#define GENERIC_TYPE unsigned short
-#define ABS_FUNCTION(x) (x)
-#define SIGN_FUNCTION(x) (((x) > 0) ? 1 : 0)
-#define CMP_FUNCTION ushort_cmp_function
-#include "slarith.inc"
-#endif				       /* SIZEOF_INT != SIZEOF_SHORT */
-
-/* Unfortunately, the numbers that were assigned to the data-types were
- * not well thought out.  So, I need to use the following table.
- */
-#define MAXIMUM_ARITH_TYPE_VALUE	SLANG_FLOAT_TYPE
-#define IS_INTEGER_TYPE(x) \
-  (((x) <= MAXIMUM_ARITH_TYPE_VALUE) \
-      && (Type_Precedence_Table[x] < 8) && (Type_Precedence_Table[x] != -1))
-#define IS_ARITHMETIC_TYPE(x) \
-  (((x) <= MAXIMUM_ARITH_TYPE_VALUE) && (Type_Precedence_Table[x] != -1))
-
-#define LONG_PRECEDENCE_VALUE	6
-#define FLOAT_PRECEDENCE_VALUE	8
-
-static signed char Type_Precedence_Table [MAXIMUM_ARITH_TYPE_VALUE + 1] =
-{
-   -1,				       /* SLANG_UNDEFINED_TYPE */
-   -1,				       /* SLANG_VOID_TYPE */
-   4,				       /* SLANG_INT_TYPE */
-   9,				       /* SLANG_DOUBLE_TYPE */
-   0,				       /* SLANG_CHAR_TYPE */
-   -1,				       /* SLANG_INTP_TYPE */
-   -1,				       /* SLANG_REF_TYPE */
-   -1,				       /* SLANG_COMPLEX_TYPE */
-   -1,				       /* SLANG_NULL_TYPE */
-   1,				       /* SLANG_UCHAR_TYPE */
-   2,				       /* SLANG_SHORT_TYPE */
-   3,				       /* SLANG_USHORT_TYPE */
-   5,				       /* SLANG_UINT_TYPE */
-   6,				       /* SLANG_LONG_TYPE */
-   7,				       /* SLANG_ULONG_TYPE */
-   -1,				       /* SLANG_STRING_TYPE */
-   8				       /* SLANG_FLOAT_TYPE */
-};
-
-int _SLarith_get_precedence (unsigned char type)
-{
-   if (type > MAXIMUM_ARITH_TYPE_VALUE)
-     return -1;
-
-   return Type_Precedence_Table[type];
-}
-
-unsigned char _SLarith_promote_type (unsigned char t)
-{
-   switch (t)
-     {
-      case SLANG_FLOAT_TYPE:
-      case SLANG_DOUBLE_TYPE:
-      case SLANG_LONG_TYPE:
-      case SLANG_ULONG_TYPE:
-      case SLANG_INT_TYPE:
-      case SLANG_UINT_TYPE:
-	break;
-
-      case SLANG_USHORT_TYPE:
-#if SIZEOF_INT == SIZEOF_SHORT
-	t = SLANG_UINT_TYPE;
-	break;
-#endif
-	/* drop */
-      case SLANG_CHAR_TYPE:
-      case SLANG_UCHAR_TYPE:
-      case SLANG_SHORT_TYPE:
-      default:
-	t = SLANG_INT_TYPE;
-     }
-
-   return t;
-}
-
-static unsigned char promote_to_common_type (unsigned char a, unsigned char b)
-{
-   a = _SLarith_promote_type (a);
-   b = _SLarith_promote_type (b);
-
-   return (Type_Precedence_Table[a] > Type_Precedence_Table[b]) ? a : b;
-}
-
-static int arith_bin_op_result (int op, unsigned char a_type, unsigned char b_type,
-				unsigned char *c_type)
-{
-   switch (op)
-     {
-      case SLANG_EQ:
-      case SLANG_NE:
-      case SLANG_GT:
-      case SLANG_GE:
-      case SLANG_LT:
-      case SLANG_LE:
-      case SLANG_OR:
-      case SLANG_AND:
-	*c_type = SLANG_CHAR_TYPE;
-	return 1;
-
-      case SLANG_POW:
-	if (SLANG_FLOAT_TYPE == promote_to_common_type (a_type, b_type))
-	  *c_type = SLANG_FLOAT_TYPE;
-	else
-	  *c_type = SLANG_DOUBLE_TYPE;
-	return 1;
-
-      case SLANG_BAND:
-      case SLANG_BXOR:
-      case SLANG_BOR:
-      case SLANG_SHL:
-      case SLANG_SHR:
-	/* The bit-level operations are defined just for integer types */
-	if ((0 == IS_INTEGER_TYPE (a_type))
-	    || (0 == IS_INTEGER_TYPE(b_type)))
-	  return 0;
-	break;
-
-      default:
-	break;
-     }
-
-   *c_type = promote_to_common_type (a_type, b_type);
-   return 1;
-}
-
-typedef int (*Bin_Fun_Type) (int,
-			     unsigned char, VOID_STAR, unsigned int,
-			     unsigned char, VOID_STAR, unsigned int,
-			     VOID_STAR);
-
-/* This array of functions must be indexed by precedence after arithmetic
- * promotions.
- */
-static Bin_Fun_Type Bin_Fun_Map [MAX_ARITHMETIC_TYPES] =
-{
-   NULL,
-   NULL,
-   NULL,
-   NULL,
-   int_int_bin_op,
-   uint_uint_bin_op,
-   long_long_bin_op,
-   ulong_ulong_bin_op,
-   float_float_bin_op,
-   double_double_bin_op
-};
-
-static int arith_bin_op (int op,
-			 unsigned char a_type, VOID_STAR ap, unsigned int na,
-			 unsigned char b_type, VOID_STAR bp, unsigned int nb,
-			 VOID_STAR cp)
-{
-   Convert_Fun_Type af, bf;
-   Bin_Fun_Type binfun;
-   int a_indx, b_indx, c_indx;
-   unsigned char c_type;
-   int ret;
-
-   c_type = promote_to_common_type (a_type, b_type);
-
-   a_indx = Type_Precedence_Table [a_type];
-   b_indx = Type_Precedence_Table [b_type];
-   c_indx = Type_Precedence_Table [c_type];
-
-   af = Binary_Matrix[a_indx][c_indx].convert_function;
-   bf = Binary_Matrix[b_indx][c_indx].convert_function;
-   binfun = Bin_Fun_Map[c_indx];
-
-   if ((af != NULL)
-       && (NULL == (ap = (VOID_STAR) (*af) (ap, na))))
-     return -1;
-
-   if ((bf != NULL)
-       && (NULL == (bp = (VOID_STAR) (*bf) (bp, nb))))
-     {
-	if (af != NULL) SLfree ((char *) ap);
-	return -1;
-     }
-
-   ret = (*binfun) (op, a_type, ap, na, b_type, bp, nb, cp);
-   if (af != NULL) SLfree ((char *) ap);
-   if (bf != NULL) SLfree ((char *) bp);
-
-   return ret;
-}
-
-static int arith_unary_op_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) a;
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_SQR:
-      case SLANG_MUL2:
-      case SLANG_PLUSPLUS:
-      case SLANG_MINUSMINUS:
-      case SLANG_CHS:
-      case SLANG_ABS:
-	*b = a;
-	break;
-
-      case SLANG_NOT:
-      case SLANG_BNOT:
-	if (0 == IS_INTEGER_TYPE(a))
-	  return 0;
-	*b = a;
-	break;
-
-      case SLANG_SIGN:
-	*b = SLANG_INT_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int integer_pop (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Object_Type obj;
-   int i, j;
-   void (*f)(VOID_STAR, VOID_STAR, unsigned int);
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   if ((obj.data_type > MAXIMUM_ARITH_TYPE_VALUE)
-       || ((j = Type_Precedence_Table[obj.data_type]) == -1)
-       || (j >= FLOAT_PRECEDENCE_VALUE))
-     {
-	_SLclass_type_mismatch_error (type, obj.data_type);
-       	SLang_free_object (&obj);
-	return -1;
-     }
-
-   i = Type_Precedence_Table[type];
-   f = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[j][i].copy_function;
-
-   (*f) (ptr, (VOID_STAR)&obj.v, 1);
-
-   return 0;
-}
-
-static int integer_push (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Object_Type obj;
-   int i;
-   void (*f)(VOID_STAR, VOID_STAR, unsigned int);
-
-   i = Type_Precedence_Table[type];
-   f = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[i][i].copy_function;
-
-   obj.data_type = type;
-
-   (*f) ((VOID_STAR)&obj.v, ptr, 1);
-
-   return SLang_push (&obj);
-}
-
-int SLang_pop_char (char *i)
-{
-   return integer_pop (SLANG_CHAR_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_uchar (unsigned char *i)
-{
-   return integer_pop (SLANG_UCHAR_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_short (short *i)
-{
-   return integer_pop (SLANG_SHORT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_ushort (unsigned short *i)
-{
-   return integer_pop (SLANG_USHORT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_long (long *i)
-{
-   return integer_pop (SLANG_LONG_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_ulong (unsigned long *i)
-{
-   return integer_pop (SLANG_ULONG_TYPE, (VOID_STAR) i);
-}
-
-int SLang_pop_integer (int *i)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (SLANG_INT_TYPE, &obj, 0))
-     return -1;
-   *i = obj.v.int_val;
-   return 0;
-#else
-  return integer_pop (SLANG_INT_TYPE, (VOID_STAR) i);
-#endif
-}
-
-int SLang_pop_uinteger (unsigned int *i)
-{
-   return integer_pop (SLANG_UINT_TYPE, (VOID_STAR) i);
-}
-
-int SLang_push_integer (int i)
-{
-   return SLclass_push_int_obj (SLANG_INT_TYPE, i);
-}
-int SLang_push_uinteger (unsigned int i)
-{
-   return SLclass_push_int_obj (SLANG_UINT_TYPE, (int) i);
-}
-int SLang_push_char (char i)
-{
-   return SLclass_push_char_obj (SLANG_CHAR_TYPE, i);
-}
-int SLang_push_uchar (unsigned char i)
-{
-   return SLclass_push_char_obj (SLANG_UCHAR_TYPE, (char) i);
-}
-int SLang_push_short (short i)
-{
-   return SLclass_push_short_obj (SLANG_SHORT_TYPE, i);
-}
-int SLang_push_ushort (unsigned short i)
-{
-   return SLclass_push_short_obj (SLANG_USHORT_TYPE, (unsigned short) i);
-}
-int SLang_push_long (long i)
-{
-   return SLclass_push_long_obj (SLANG_LONG_TYPE, i);
-}
-int SLang_push_ulong (unsigned long i)
-{
-   return SLclass_push_long_obj (SLANG_ULONG_TYPE, (long) i);
-}
-
-_INLINE_
-int _SLarith_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
-		       unsigned char b_type, VOID_STAR bp)
-{
-   int i, j;
-
-   void (*copy)(VOID_STAR, VOID_STAR, unsigned int);
-
-   i = Type_Precedence_Table[a_type];
-   j = Type_Precedence_Table[b_type];
-
-   copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[i][j].copy_function;
-
-   (*copy) (bp, ap, na);
-   return 1;
-}
-
-#if SLANG_HAS_FLOAT
-
-int SLang_pop_double(double *x, int *convertp, int *ip)
-{
-   SLang_Object_Type obj;
-   int i, convert;
-
-   if (0 != SLang_pop (&obj))
-     return -1;
-
-   i = 0;
-   convert = 0;
-
-   switch (obj.data_type)
-     {
-      case SLANG_FLOAT_TYPE:
-	*x = (double) obj.v.float_val;
-	break;
-
-      case SLANG_DOUBLE_TYPE:
-	*x = obj.v.double_val;
-	break;
-
-      case SLANG_INT_TYPE:
-	i = (int) obj.v.long_val;
-	*x = (double) i;
-	convert = 1;
-	break;
-
-      case SLANG_CHAR_TYPE: *x = (double) obj.v.char_val; break;
-      case SLANG_UCHAR_TYPE: *x = (double) obj.v.uchar_val; break;
-      case SLANG_SHORT_TYPE: *x = (double) obj.v.short_val; break;
-      case SLANG_USHORT_TYPE: *x = (double) obj.v.ushort_val; break;
-      case SLANG_UINT_TYPE: *x = (double) obj.v.uint_val; break;
-      case SLANG_LONG_TYPE: *x = (double) obj.v.long_val; break;
-      case SLANG_ULONG_TYPE: *x = (double) obj.v.ulong_val; break;
-	
-      default:
-	_SLclass_type_mismatch_error (SLANG_DOUBLE_TYPE, obj.data_type);
-	SLang_free_object (&obj);
-	return -1;
-     }
-
-   if (convertp != NULL) *convertp = convert;
-   if (ip != NULL) *ip = i;
-
-   return 0;
-}
-
-int SLang_push_double (double x)
-{
-   return SLclass_push_double_obj (SLANG_DOUBLE_TYPE, x);
-}
-
-int SLang_pop_float (float *x)
-{
-   double d;
-
-   /* Pop it as a double and let the double function do all the typcasting */
-   if (-1 == SLang_pop_double (&d, NULL, NULL))
-     return -1;
-
-   *x = (float) d;
-   return 0;
-}
-
-int SLang_push_float (float f)
-{
-   return SLclass_push_float_obj (SLANG_FLOAT_TYPE, (double) f);
-}
-
-/* Double */
-static int double_push (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   SLang_push_double (*(double *) ptr);
-   return 0;
-}
-
-static int double_push_literal (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   return SLang_push_double (**(double **)ptr);
-}
-
-static int double_pop (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return SLang_pop_double ((double *) ptr, NULL, NULL);
-}
-
-static void double_byte_code_destroy (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   SLfree (*(char **) ptr);
-}
-
-static int float_push (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   SLang_push_float (*(float *) ptr);
-   return 0;
-}
-
-static int float_pop (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return SLang_pop_float ((float *) ptr);
-}
-
-#endif				       /* SLANG_HAS_FLOAT */
-
-#if SLANG_HAS_FLOAT
-static char Double_Format[16] = "%g";
-
-void _SLset_double_format (char *s)
-{
-   strncpy (Double_Format, s, 15);
-   Double_Format[15] = 0;
-}
-#endif
-
-static char *arith_string (unsigned char type, VOID_STAR v)
-{
-   char buf [256];
-   char *s;
-
-   s = buf;
-
-   switch (type)
-     {
-      default:
-	s = SLclass_get_datatype_name (type);
-	break;
-
-      case SLANG_CHAR_TYPE:
-	sprintf (s, "%d", *(char *) v);
-	break;
-      case SLANG_UCHAR_TYPE:
-	sprintf (s, "%u", *(unsigned char *) v);
-	break;
-      case SLANG_SHORT_TYPE:
-	sprintf (s, "%d", *(short *) v);
-	break;
-      case SLANG_USHORT_TYPE:
-	sprintf (s, "%u", *(unsigned short *) v);
-	break;
-      case SLANG_INT_TYPE:
-	sprintf (s, "%d", *(int *) v);
-	break;
-      case SLANG_UINT_TYPE:
-	sprintf (s, "%u", *(unsigned int *) v);
-	break;
-      case SLANG_LONG_TYPE:
-	sprintf (s, "%ld", *(long *) v);
-	break;
-      case SLANG_ULONG_TYPE:
-	sprintf (s, "%lu", *(unsigned long *) v);
-	break;
-#if SLANG_HAS_FLOAT
-      case SLANG_FLOAT_TYPE:
-	if (EOF == _SLsnprintf (buf, sizeof (buf), Double_Format, *(float *) v))
-	  sprintf (s, "%e", *(float *) v);
-	break;
-      case SLANG_DOUBLE_TYPE:
-	if (EOF == _SLsnprintf (buf, sizeof (buf), Double_Format, *(double *) v))
-	  sprintf (s, "%e", *(double *) v);
-	break;
-#endif
-     }
-
-   return SLmake_string (s);
-}
-
-static int integer_to_bool (unsigned char type, int *t)
-{
-   (void) type;
-   return SLang_pop_integer (t);
-}
-
-static int push_int_literal (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_push_int_obj (type, (int) *(long *) ptr);
-}
-
-static int push_char_literal (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_push_char_obj (type, (char) *(long *) ptr);
-}
-
-#if SIZEOF_SHORT != SIZEOF_INT
-static int push_short_literal (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_push_short_obj (type, (short) *(long *) ptr);
-}
-#endif
-
-#if SIZEOF_INT != SIZEOF_LONG
-static int push_long_literal (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_push_long_obj (type, *(long *) ptr);
-}
-#endif
-
-typedef struct
-{
-   char *name;
-   unsigned char data_type;
-   unsigned int sizeof_type;
-   int (*unary_fun)(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-   int (*push_literal) (unsigned char, VOID_STAR);
-   int (*cmp_fun) (unsigned char, VOID_STAR, VOID_STAR, int *);
-}
-Integer_Info_Type;
-
-static Integer_Info_Type Integer_Types [8] =
-{
-     {"Char_Type", SLANG_CHAR_TYPE, sizeof (char), char_unary_op, push_char_literal, char_cmp_function},
-     {"UChar_Type", SLANG_UCHAR_TYPE, sizeof (unsigned char), uchar_unary_op, push_char_literal, uchar_cmp_function},
-#if SIZEOF_INT != SIZEOF_SHORT
-     {"Short_Type", SLANG_SHORT_TYPE, sizeof (short), short_unary_op, push_short_literal, short_cmp_function},
-     {"UShort_Type", SLANG_USHORT_TYPE, sizeof (unsigned short), ushort_unary_op, push_short_literal, ushort_cmp_function},
-#else
-     {NULL, SLANG_SHORT_TYPE},
-     {NULL, SLANG_USHORT_TYPE},
-#endif
-
-     {"Integer_Type", SLANG_INT_TYPE, sizeof (int), int_unary_op, push_int_literal, int_cmp_function},
-     {"UInteger_Type", SLANG_UINT_TYPE, sizeof (unsigned int), uint_unary_op, push_int_literal, uint_cmp_function},
-
-#if SIZEOF_INT != SIZEOF_LONG
-     {"Long_Type", SLANG_LONG_TYPE, sizeof (long), long_unary_op, push_long_literal, long_cmp_function},
-     {"ULong_Type", SLANG_ULONG_TYPE, sizeof (unsigned long), ulong_unary_op, push_long_literal, ulong_cmp_function}
-#else
-     {NULL, SLANG_LONG_TYPE, 0, NULL, NULL, NULL},
-     {NULL, SLANG_ULONG_TYPE, 0, NULL, NULL, NULL}
-#endif
-};
-
-static int create_synonyms (void)
-{
-   static char *names[8] =
-     {
-	"Int16_Type", "UInt16_Type", "Int32_Type", "UInt32_Type",
-	"Int64_Type", "UInt64_Type",
-	"Float32_Type", "Float64_Type"
-     };
-   int types[8];
-   unsigned int i;
-
-   memset ((char *) types, 0, sizeof (types));
-
-   /* The assumption is that sizeof(unsigned X) == sizeof (X) */
-#if SIZEOF_INT == 2
-   types[0] = SLANG_INT_TYPE;
-   types[1] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 2
-   types[0] = SLANG_SHORT_TYPE;
-   types[1] = SLANG_USHORT_TYPE;
-# else
-#  if SIZEOF_LONG == 2
-   types[0] = SLANG_LONG_TYPE;
-   types[1] = SLANG_ULONG_TYPE;
-#  endif
-# endif
-#endif
-
-#if SIZEOF_INT == 4
-   types[2] = SLANG_INT_TYPE;
-   types[3] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 4
-   types[2] = SLANG_SHORT_TYPE;
-   types[3] = SLANG_USHORT_TYPE;
-# else
-#  if SIZEOF_LONG == 4
-   types[2] = SLANG_LONG_TYPE;
-   types[3] = SLANG_ULONG_TYPE;
-#  endif
-# endif
-#endif
-
-#if SIZEOF_INT == 8
-   types[4] = SLANG_INT_TYPE;
-   types[5] = SLANG_UINT_TYPE;
-#else
-# if SIZEOF_SHORT == 8
-   types[4] = SLANG_SHORT_TYPE;
-   types[5] = SLANG_USHORT_TYPE;
-# else
-#  if SIZEOF_LONG == 8
-   types[4] = SLANG_LONG_TYPE;
-   types[5] = SLANG_ULONG_TYPE;
-#  endif
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-
-#if SIZEOF_FLOAT == 4
-   types[6] = SLANG_FLOAT_TYPE;
-#else
-# if SIZEOF_DOUBLE == 4
-   types[6] = SLANG_DOUBLE_TYPE;
-# endif
-#endif
-#if SIZEOF_FLOAT == 8
-   types[7] = SLANG_FLOAT_TYPE;
-#else
-# if SIZEOF_DOUBLE == 8
-   types[7] = SLANG_DOUBLE_TYPE;
-# endif
-#endif
-
-#endif
-
-   if ((-1 == SLclass_create_synonym ("Int_Type", SLANG_INT_TYPE))
-       || (-1 == SLclass_create_synonym ("UInt_Type", SLANG_UINT_TYPE)))
-     return -1;
-
-   for (i = 0; i < 8; i++)
-     {
-	if (types[i] == 0) continue;
-
-	if (-1 == SLclass_create_synonym (names[i], types[i]))
-	  return -1;
-     }
-
-#if SIZEOF_INT == SIZEOF_SHORT
-   if ((-1 == SLclass_create_synonym ("Short_Type", SLANG_INT_TYPE))
-       || (-1 == SLclass_create_synonym ("UShort_Type", SLANG_UINT_TYPE))
-       || (-1 == _SLclass_copy_class (SLANG_SHORT_TYPE, SLANG_INT_TYPE))
-       || (-1 == _SLclass_copy_class (SLANG_USHORT_TYPE, SLANG_UINT_TYPE)))
-     return -1;
-#endif
-#if SIZEOF_INT == SIZEOF_LONG
-   if ((-1 == SLclass_create_synonym ("Long_Type", SLANG_INT_TYPE))
-       || (-1 == SLclass_create_synonym ("ULong_Type", SLANG_UINT_TYPE))
-       || (-1 == _SLclass_copy_class (SLANG_LONG_TYPE, SLANG_INT_TYPE))
-       || (-1 == _SLclass_copy_class (SLANG_ULONG_TYPE, SLANG_UINT_TYPE)))
-     return -1;
-#endif
-   return 0;
-}
-
-int _SLarith_register_types (void)
-{
-   SLang_Class_Type *cl;
-   int a_type, b_type;
-   int i, j;
-
-#if defined(HAVE_SETLOCALE) && defined(LC_NUMERIC)
-   /* make sure decimal point it used --- the parser requires it */
-   (void) setlocale (LC_NUMERIC, "C"); 
-#endif
-
-   for (i = 0; i < 8; i++)
-     {
-	Integer_Info_Type *info;
-
-	info = Integer_Types + i;
-
-	if (info->name == NULL)
-	  {
-	     /* This happens when the object is the same size as an integer
-	      * For this case, we really want to copy the integer class.
-	      * We will handle that when the synonym is created.
-	      */
-	     continue;
-	  }
-
-	if (NULL == (cl = SLclass_allocate_class (info->name)))
-	  return -1;
-
-	(void) SLclass_set_string_function (cl, arith_string);
-	(void) SLclass_set_push_function (cl, integer_push);
-	(void) SLclass_set_pop_function (cl, integer_pop);
-	cl->cl_push_literal = info->push_literal;
-	cl->cl_to_bool = integer_to_bool;
-
-	cl->cl_cmp = info->cmp_fun;
-
-	if (-1 == SLclass_register_class (cl, info->data_type, info->sizeof_type,
-					  SLANG_CLASS_TYPE_SCALAR))
-	  return -1;
-	if (-1 == SLclass_add_unary_op (info->data_type, info->unary_fun, arith_unary_op_result))
-	  return -1;
-	
-	_SLarith_Is_Arith_Type [info->data_type] = 1;
-     }
-
-#if SLANG_HAS_FLOAT
-   if (NULL == (cl = SLclass_allocate_class ("Double_Type")))
-     return -1;
-   (void) SLclass_set_push_function (cl, double_push);
-   (void) SLclass_set_pop_function (cl, double_pop);
-   (void) SLclass_set_string_function (cl, arith_string);
-   cl->cl_byte_code_destroy = double_byte_code_destroy;
-   cl->cl_push_literal = double_push_literal;
-   cl->cl_cmp = double_cmp_function;
-
-   if (-1 == SLclass_register_class (cl, SLANG_DOUBLE_TYPE, sizeof (double),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-   if (-1 == SLclass_add_unary_op (SLANG_DOUBLE_TYPE, double_unary_op, arith_unary_op_result))
-     return -1;
-   _SLarith_Is_Arith_Type [SLANG_DOUBLE_TYPE] = 2;
-
-   if (NULL == (cl = SLclass_allocate_class ("Float_Type")))
-     return -1;
-   (void) SLclass_set_string_function (cl, arith_string);
-   (void) SLclass_set_push_function (cl, float_push);
-   (void) SLclass_set_pop_function (cl, float_pop);
-   cl->cl_cmp = float_cmp_function;
-
-   if (-1 == SLclass_register_class (cl, SLANG_FLOAT_TYPE, sizeof (float),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-   if (-1 == SLclass_add_unary_op (SLANG_FLOAT_TYPE, float_unary_op, arith_unary_op_result))
-     return -1;
-   _SLarith_Is_Arith_Type [SLANG_FLOAT_TYPE] = 2;
-#endif
-
-   if (-1 == create_synonyms ())
-     return -1;
-
-   for (a_type = 0; a_type <= MAXIMUM_ARITH_TYPE_VALUE; a_type++)
-     {
-	if (-1 == (i = Type_Precedence_Table [a_type]))
-	  continue;
-
-	for (b_type = 0; b_type <= MAXIMUM_ARITH_TYPE_VALUE; b_type++)
-	  {
-	     int implicit_ok;
-
-	     if (-1 == (j = Type_Precedence_Table [b_type]))
-	       continue;
-
-	     /* Allow implicit typecast, except from into to float */
-	     implicit_ok = ((j >= FLOAT_PRECEDENCE_VALUE)
-			    || (i < FLOAT_PRECEDENCE_VALUE));
-
-	     if (-1 == SLclass_add_binary_op (a_type, b_type, arith_bin_op, arith_bin_op_result))
-	       return -1;
-
-	     if (i != j)
-	       if (-1 == SLclass_add_typecast (a_type, b_type, _SLarith_typecast, implicit_ok))
-		 return -1;
-	  }
-     }
-
-   return 0;
-}
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-
-static void promote_objs (SLang_Object_Type *a, SLang_Object_Type *b,
-			  SLang_Object_Type *c, SLang_Object_Type *d)
-{
-   unsigned char ia, ib, ic, id;
-   int i, j;
-   void (*copy)(VOID_STAR, VOID_STAR, unsigned int);
-
-   ia = a->data_type;
-   ib = b->data_type;
-   
-   ic = _SLarith_promote_type (ia);
-
-   if (ic == ib) id = ic;	       /* already promoted */
-   else id = _SLarith_promote_type (ib);
-
-   i = Type_Precedence_Table[ic];
-   j = Type_Precedence_Table[id];
-   if (i > j)
-     {
-	id = ic;
-	j = i;
-     }
-
-   c->data_type = d->data_type = id;
-
-   i = Type_Precedence_Table[ia];
-   copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[i][j].copy_function;
-   (*copy) ((VOID_STAR) &c->v, (VOID_STAR)&a->v, 1);
-
-   i = Type_Precedence_Table[ib];
-   copy = (void (*)(VOID_STAR, VOID_STAR, unsigned int))
-     Binary_Matrix[i][j].copy_function;
-   (*copy) ((VOID_STAR) &d->v, (VOID_STAR)&b->v, 1);
-}
-
-int _SLarith_bin_op (SLang_Object_Type *oa, SLang_Object_Type *ob, int op)
-{
-   unsigned char a_type, b_type;
-
-   a_type = oa->data_type;
-   b_type = ob->data_type;
-
-   if (a_type != b_type)
-     {
-	SLang_Object_Type obj_a, obj_b;
-	
-	/* Handle common cases */
-	if ((a_type == SLANG_INT_TYPE)
-	    && (b_type == SLANG_DOUBLE_TYPE))
-	  return double_double_scalar_bin_op (oa->v.int_val, ob->v.double_val, op);
-
-	if ((a_type == SLANG_DOUBLE_TYPE)
-	    && (b_type == SLANG_INT_TYPE))
-	  return double_double_scalar_bin_op (oa->v.double_val, ob->v.int_val, op);
-
-	/* Otherwise do it the hard way */
-	promote_objs (oa, ob, &obj_a, &obj_b);
-	oa = &obj_a;
-	ob = &obj_b;
-	
-	a_type = oa->data_type;
-	b_type = ob->data_type;
-     }
-   
-	  
-   switch (a_type)
-     {
-      case SLANG_CHAR_TYPE:
-	return int_int_scalar_bin_op (oa->v.char_val, ob->v.char_val, op);
-
-      case SLANG_UCHAR_TYPE:
-	return int_int_scalar_bin_op (oa->v.uchar_val, ob->v.uchar_val, op);
-
-      case SLANG_SHORT_TYPE:
-	return int_int_scalar_bin_op (oa->v.short_val, ob->v.short_val, op);
-
-      case SLANG_USHORT_TYPE:
-# if SIZEOF_INT == SIZEOF_SHORT
-	return uint_uint_scalar_bin_op (oa->v.ushort_val, ob->v.ushort_val, op);
-# else
-	return int_int_scalar_bin_op ((int)oa->v.ushort_val, (int)ob->v.ushort_val, op);
-# endif
-
-#if SIZEOF_LONG == SIZEOF_INT
-      case SLANG_LONG_TYPE:
-#endif
-      case SLANG_INT_TYPE:
-	return int_int_scalar_bin_op (oa->v.int_val, ob->v.int_val, op);
-
-#if SIZEOF_LONG == SIZEOF_INT
-      case SLANG_ULONG_TYPE:
-#endif
-      case SLANG_UINT_TYPE:
-	return uint_uint_scalar_bin_op (oa->v.uint_val, ob->v.uint_val, op);
-	
-#if SIZEOF_LONG != SIZEOF_INT
-      case SLANG_LONG_TYPE:
-	return long_long_scalar_bin_op (oa->v.long_val, ob->v.long_val, op);
-      case SLANG_ULONG_TYPE:
-	return ulong_ulong_scalar_bin_op (oa->v.ulong_val, ob->v.ulong_val, op);
-#endif
-      case SLANG_FLOAT_TYPE:
-	return float_float_scalar_bin_op (oa->v.float_val, ob->v.float_val, op);
-      case SLANG_DOUBLE_TYPE:
-	return double_double_scalar_bin_op (oa->v.double_val, ob->v.double_val, op);
-     }
-   
-   return 1;
-}
-#endif
diff --git a/mdk-stage1/slang/slarith.inc b/mdk-stage1/slang/slarith.inc
deleted file mode 100644
index efa8a5e04..000000000
--- a/mdk-stage1/slang/slarith.inc
+++ /dev/null
@@ -1,783 +0,0 @@
-/* -*- c -*- */
-
-/* This include file is a template for defining arithmetic binary operations 
- * on arithmetic types.  I realize that doing it this way is not very
- * elegant but it minimizes the number of lines of code and I believe it 
- * promotes clarity.
- */
-
-/* The following macros should be properly defined before including this file:
- *
- *   GENERIC_BINARY_FUNCTION:   The name of the binary function
- *   GENERIC_TYPE:              The class data type
- *   MOD_FUNCTION:	        The function to use for mod
- *   ABS_FUNCTION:              Name of the abs function
- *   SIGN_FUNCTION:             Name of the sign function
- *   GENERIC_UNARY_FUNCTION     Name of the unary function
- *
- * If GENERIC_BIT_OPERATIONS is defined, the bit-level binary operators 
- * will get included.  If the data type has a power operation (SLANG_POW), 
- * then POW_FUNCTION should be defined to return POW_RESULT_TYPE.
- */
-#ifdef GENERIC_BINARY_FUNCTION
-
-static int GENERIC_BINARY_FUNCTION 
-(int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- unsigned char b_type, VOID_STAR bp, unsigned int nb,
- VOID_STAR cp)
-{
-   GENERIC_TYPE *c, *a, *b;
-#ifdef POW_FUNCTION
-   POW_RESULT_TYPE *d;
-#endif
-   unsigned int n;
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-   unsigned int n_max, da, db;
-#endif
-   char *cc;
-
-   (void) a_type;		       /* Both SLANG_INT_TYPE */
-   (void) b_type;
-
-   a = (GENERIC_TYPE *) ap;
-   b = (GENERIC_TYPE *) bp;
-   c = (GENERIC_TYPE *) cp;
-   cc = (char *) cp;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-   if (na == 1) da = 0; else da = 1;
-   if (nb == 1) db = 0; else db = 1;
-
-   if (na > nb) n_max = na; else n_max = nb;
-#endif
-
-   switch (op)
-     {
-      default:
-	return 0;
-#ifdef POW_FUNCTION
-      case SLANG_POW:
-	d = (POW_RESULT_TYPE *) cp;
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     d[n] = POW_FUNCTION(*a, *b);
-	     a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       d[n] = POW_FUNCTION(a[n],b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     if (xb == 2)
-	       for (n = 0; n < na; n++)
-		 d[n] = a[n] * a[n];
-	     else
-	       for (n = 0; n < na; n++)
-		 d[n] = POW_FUNCTION(a[n], xb);
-	  }
-	else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       d[n] = POW_FUNCTION(xa, b[n]);
-	  }
-#endif
-	break;
-#endif
-      case SLANG_PLUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a + *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] + b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] + xb;
-	  }
-	else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa + b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_MINUS:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a - *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] - b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] - xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa - b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_TIMES:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a * *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] * b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] * xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa * b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_DIVIDE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (*b == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     c[n] = (*a / *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       {
-		  if (b[n] == 0)
-		    {
-		       SLang_Error = SL_DIVIDE_ERROR;
-		       return -1;
-		    }
-		  c[n] = a[n] / b[n];
-	       }
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     
-	     if (xb == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] / xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       {
-		  if (b[n] == 0)
-		    {
-		       SLang_Error = SL_DIVIDE_ERROR;
-		       return -1;
-		    }
-		  c[n] = xa / b[n];
-	       }
-	  }
-#endif
-	break;
-	     
-      case SLANG_MOD:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (*b == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     c[n] = MOD_FUNCTION(*a, *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       {
-		  if (b[n] == 0)
-		    {
-		       SLang_Error = SL_DIVIDE_ERROR;
-		       return -1;
-		    }
-		  c[n] = MOD_FUNCTION(a[n],b[n]);
-	       }
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     if (xb == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     for (n = 0; n < na; n++)
-	       c[n] = MOD_FUNCTION(a[n],xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       {
-		  if (b[n] == 0)
-		    {
-		       SLang_Error = SL_DIVIDE_ERROR;
-		       return -1;
-		    }
-		  c[n] = MOD_FUNCTION(xa,b[n]);
-	       }
-	  }
-#endif
-	break;
-
-#ifdef GENERIC_BIT_OPERATIONS
-      case SLANG_BAND:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a & *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] & b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] & xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa & b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_BXOR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a ^ *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] ^ b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] ^ xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa ^ b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_BOR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a | *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] | b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] | xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa | b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_SHL:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a << *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] << b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] << xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa << b[n];
-	  }
-#endif
-	break;
-
-      case SLANG_SHR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (*a >> *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] >> b[n];
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       c[n] = a[n] >> xb;
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       c[n] = xa >> b[n];
-	  }
-#endif
-	break;
-#endif				       /* GENERIC_BIT_OPERATIONS */
-      case SLANG_EQ:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a == *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] == b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] == xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa == b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_NE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a != *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] != b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] != xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa != b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_GT:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a > *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] > b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] > xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa > b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_GE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a >= *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] >= b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] >= xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa >= b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_LT:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a < *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] < b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] < xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa < b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_LE:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a <= *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] <= b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] <= xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa <= b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_OR:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a || *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] || b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] || xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa || b[n]);
-	  }
-#endif
-	break;
-
-      case SLANG_AND:
-#if _SLANG_OPTIMIZE_FOR_SPEED < 2
-	for (n = 0; n < n_max; n++)
-	  {
-	     cc[n] = (*a && *b); a += da; b += db;
-	  }
-#else
-	if (na == nb)
-	  {
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] && b[n]);
-	  }
-	else if (nb == 1)
-	  {
-	     GENERIC_TYPE xb = *b;
-	     for (n = 0; n < na; n++)
-	       cc[n] = (a[n] && xb);
-	  }
-        else /* if (na == 1) */
-	  {
-	     GENERIC_TYPE xa = *a;
-	     for (n = 0; n < nb; n++)
-	       cc[n] = (xa && b[n]);
-	  }
-#endif
-	break;
-     }
-   return 1;
-}
-
-#endif				       /* GENERIC_BINARY_FUNCTION */
-
-
-#ifdef GENERIC_UNARY_FUNCTION
-
-static int GENERIC_UNARY_FUNCTION
-(int op,
- unsigned char a_type, VOID_STAR ap, unsigned int na,
- VOID_STAR bp
- )
-{
-   GENERIC_TYPE *a, *b;
-   unsigned int n;
-   int *ib;
-
-   (void) a_type;
-
-   a = (GENERIC_TYPE *) ap;
-   b = (GENERIC_TYPE *) bp;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUSPLUS:
-	for (n = 0; n < na; n++) b[n] = (a[n] + 1);
-	break;
-      case SLANG_MINUSMINUS:
-	for (n = 0; n < na; n++) b[n] = (a[n] - 1);
-	break;
-      case SLANG_CHS:
-	for (n = 0; n < na; n++) b[n] = (GENERIC_TYPE) -(a[n]);
-	break;
-      case SLANG_SQR:
-	for (n = 0; n < na; n++) b[n] = (a[n] * a[n]);
-	break;
-      case SLANG_MUL2:
-	for (n = 0; n < na; n++) b[n] = (2 * a[n]);
-	break;
-      case SLANG_ABS:
-	for (n = 0; n < na; n++) b[n] = ABS_FUNCTION (a[n]);
-	break;
-      case SLANG_SIGN:
-	ib = (int *) bp;
-	for (n = 0; n < na; n++)
-	  ib[n] = SIGN_FUNCTION(a[n]);
-	break;
-
-#ifdef GENERIC_BIT_OPERATIONS
-      case SLANG_NOT:
-	for (n = 0; n < na; n++) b[n] = !(a[n]);
-	break;
-      case SLANG_BNOT:
-	for (n = 0; n < na; n++) b[n] = ~(a[n]);
-	break;
-#endif
-     }
-
-   return 1;
-}
-#endif				       /* GENERIC_UNARY_FUNCTION */
-
-
-#ifdef SCALAR_BINARY_FUNCTION
-
-static int SCALAR_BINARY_FUNCTION (GENERIC_TYPE a, GENERIC_TYPE b, int op)
-{
-   switch (op)
-     {
-      default:
-	return 1;
-	
-#ifdef POW_FUNCTION
-      case SLANG_POW:
-	return PUSH_POW_OBJ_FUN(POW_FUNCTION(a, b));
-#endif
-      case SLANG_PLUS:
-	return PUSH_SCALAR_OBJ_FUN (a + b);
-      case SLANG_MINUS:
-	return PUSH_SCALAR_OBJ_FUN (a - b);
-      case SLANG_TIMES:
-	return PUSH_SCALAR_OBJ_FUN (a * b);
-      case SLANG_DIVIDE:
-	if (b == 0)
-	  {
-	     SLang_Error = SL_DIVIDE_ERROR;
-	     return -1;
-	  }
-	return PUSH_SCALAR_OBJ_FUN (a / b);
-      case SLANG_MOD:
-	if (b == 0)
-	  {
-	     SLang_Error = SL_DIVIDE_ERROR;
-	     return -1;
-	  }
-	return PUSH_SCALAR_OBJ_FUN (MOD_FUNCTION(a,b));
-#ifdef GENERIC_BIT_OPERATIONS
-      case SLANG_BAND:
-	return PUSH_SCALAR_OBJ_FUN (a & b);
-      case SLANG_BXOR:
-	return PUSH_SCALAR_OBJ_FUN (a ^ b);
-      case SLANG_BOR:
-	return PUSH_SCALAR_OBJ_FUN (a | b);
-      case SLANG_SHL:
-	return PUSH_SCALAR_OBJ_FUN (a << b);
-      case SLANG_SHR:
-	return PUSH_SCALAR_OBJ_FUN (a >> b);
-#endif
-      case SLANG_GT: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a > b));
-      case SLANG_LT: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a < b));
-      case SLANG_GE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a >= b));
-      case SLANG_LE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a <= b));
-      case SLANG_EQ: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a == b));
-      case SLANG_NE: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a != b));
-      case SLANG_OR: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a || b));
-      case SLANG_AND: return SLclass_push_char_obj (SLANG_CHAR_TYPE, (char)(a && b));
-     }
-}
-
-#endif				       /* SCALAR_BINARY_FUNCTION */
-
-#ifdef CMP_FUNCTION
-static int CMP_FUNCTION (unsigned char unused, VOID_STAR a, VOID_STAR b, int *c)
-{
-   GENERIC_TYPE x, y;
-
-   (void) unused;
-   x = *(GENERIC_TYPE *) a;
-   y = *(GENERIC_TYPE *) b;
-   
-   if (x > y) *c = 1;
-   else if (x == y) *c = 0;
-   else *c = -1;
-   
-   return 0;
-}
-#endif
-
-#undef CMP_FUNCTION
-#undef SCALAR_BINARY_FUNCTION
-#undef PUSH_POW_OBJ_FUN
-#undef PUSH_SCALAR_OBJ_FUN
-#undef GENERIC_BINARY_FUNCTION
-#undef GENERIC_UNARY_FUNCTION
-#undef GENERIC_BIT_OPERATIONS
-#undef GENERIC_TYPE
-#undef POW_FUNCTION
-#undef POW_RESULT_TYPE
-#undef MOD_FUNCTION
-#undef ABS_FUNCTION
-#undef SIGN_FUNCTION
diff --git a/mdk-stage1/slang/slarray.c b/mdk-stage1/slang/slarray.c
deleted file mode 100644
index 0b9a1406c..000000000
--- a/mdk-stage1/slang/slarray.c
+++ /dev/null
@@ -1,3139 +0,0 @@
-/* Array manipulation routines for S-Lang */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
-   int first_index;
-   int last_index;
-   int delta;
-}
-SLarray_Range_Array_Type;
-
-/* Use SLang_pop_array when a linear array is required. */
-static int pop_array (SLang_Array_Type **at_ptr, int convert_scalar)
-{
-   SLang_Array_Type *at;
-   int one = 1;
-   int type;
-
-   *at_ptr = NULL;
-   type = SLang_peek_at_stack ();
-
-   switch (type)
-     {
-      case -1:
-	return -1;
-
-      case SLANG_ARRAY_TYPE:
-	return SLclass_pop_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR *) at_ptr);
-
-      case SLANG_NULL_TYPE:
-	convert_scalar = 0;
-	/* drop */
-      default:
-	if (convert_scalar == 0)
-	  {
-	     SLdo_pop ();
-	     SLang_verror (SL_TYPE_MISMATCH, "Context requires an array.  Scalar not converted");
-	     return -1;
-	  }
-	break;
-     }
-
-   if (NULL == (at = SLang_create_array ((unsigned char) type, 0, NULL, &one, 1)))
-     return -1;
-
-   if (-1 == at->cl->cl_apop ((unsigned char) type, at->data))
-     {
-	SLang_free_array (at);
-	return -1;
-     }
-
-   *at_ptr = at;
-
-   return 0;
-}
-
-static VOID_STAR linear_get_data_addr (SLang_Array_Type *at, int *dims)
-{
-   unsigned int num_dims;
-   unsigned int ofs;
-   unsigned int i;
-   int *max_dims;
-
-   ofs = 0;
-   max_dims = at->dims;
-   num_dims = at->num_dims;
-
-   for (i = 0; i < num_dims; i++)
-     {
-	int d = dims[i];
-
-	if (d < 0)
-	  d = d + max_dims[i];
-
-	ofs = ofs * (unsigned int)max_dims [i] + (unsigned int) d;
-     }
-
-   return (VOID_STAR) ((char *)at->data + (ofs * at->sizeof_type));
-}
-
-static VOID_STAR get_data_addr (SLang_Array_Type *at, int *dims)
-{
-   VOID_STAR data;
-
-   data = at->data;
-   if (data == NULL)
-     {
-	SLang_verror (SL_UNKNOWN_ERROR, "Array has no data");
-	return NULL;
-     }
-
-   data = (*at->index_fun) (at, dims);
-
-   if (data == NULL)
-     {
-	SLang_verror (SL_UNKNOWN_ERROR, "Unable to access array element");
-	return NULL;
-     }
-
-   return data;
-}
-
-void _SLarray_free_array_elements (SLang_Class_Type *cl, VOID_STAR s, unsigned int num)
-{
-   unsigned int sizeof_type;
-   void (*f) (unsigned char, VOID_STAR);
-   char *p;
-   unsigned char type;
-
-   if ((cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-       || (cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR))
-     return;
-
-   f = cl->cl_destroy;
-   sizeof_type = cl->cl_sizeof_type;
-   type = cl->cl_data_type;
-
-   p = (char *) s;
-   while (num != 0)
-     {
-	if (NULL != *(VOID_STAR *)p)
-	  {
-	     (*f) (type, (VOID_STAR)p);
-	     *(VOID_STAR *) p = NULL;
-	  }
-	p += sizeof_type;
-	num--;
-     }
-}
-
-static int destroy_element (SLang_Array_Type *at,
-			    int *dims,
-			    VOID_STAR data)
-{
-   data = get_data_addr (at, dims);
-   if (data == NULL)
-     return -1;
-
-   /* This function should only get called for arrays that have
-    * pointer elements.  Do not call the destroy method if the element
-    * is NULL.
-    */
-   if (NULL != *(VOID_STAR *)data)
-     {
-	(*at->cl->cl_destroy) (at->data_type, data);
-	*(VOID_STAR *) data = NULL;
-     }
-   return 0;
-}
-
-/* This function only gets called when a new array is created.  Thus there
- * is no need to destroy the object first.
- */
-static int new_object_element (SLang_Array_Type *at,
-			       int *dims,
-			       VOID_STAR data)
-{
-   data = get_data_addr (at, dims);
-   if (data == NULL)
-     return -1;
-
-   return (*at->cl->cl_init_array_object) (at->data_type, data);
-}
-
-static int next_index (int *dims, int *max_dims, unsigned int num_dims)
-{
-   while (num_dims)
-     {
-	int dims_i;
-
-	num_dims--;
-
-	dims_i = dims [num_dims] + 1;
-	if (dims_i != (int) max_dims [num_dims])
-	  {
-	     dims [num_dims] = dims_i;
-	     return 0;
-	  }
-	dims [num_dims] = 0;
-     }
-
-   return -1;
-}
-
-static int do_method_for_all_elements (SLang_Array_Type *at,
-				       int (*method)(SLang_Array_Type *,
-						     int *,
-						     VOID_STAR),
-				       VOID_STAR client_data)
-{
-   int dims [SLARRAY_MAX_DIMS];
-   int *max_dims;
-   unsigned int num_dims;
-
-   if (at->num_elements == 0)
-     return 0;
-
-   max_dims = at->dims;
-   num_dims = at->num_dims;
-
-   SLMEMSET((char *)dims, 0, sizeof(dims));
-
-   do
-     {
-	if (-1 == (*method) (at, dims, client_data))
-	  return -1;
-     }
-   while (0 == next_index (dims, max_dims, num_dims));
-
-   return 0;
-}
-
-void SLang_free_array (SLang_Array_Type *at)
-{
-   VOID_STAR data;
-   unsigned int flags;
-
-   if (at == NULL) return;
-
-   if (at->num_refs > 1)
-     {
-	at->num_refs -= 1;
-	return;
-     }
-
-   data = at->data;
-   flags = at->flags;
-
-   if (flags & SLARR_DATA_VALUE_IS_INTRINSIC)
-     return;			       /* not to be freed */
-
-   if (flags & SLARR_DATA_VALUE_IS_POINTER)
-     (void) do_method_for_all_elements (at, destroy_element, NULL);
-
-   SLfree ((char *) data);
-   SLfree ((char *) at);
-}
-
-SLang_Array_Type *
-SLang_create_array1 (unsigned char type, int read_only, VOID_STAR data,
-		     int *dims, unsigned int num_dims, int no_init)
-{
-   SLang_Class_Type *cl;
-   unsigned int i;
-   SLang_Array_Type *at;
-   unsigned int num_elements;
-   unsigned int sizeof_type;
-   unsigned int size;
-
-   if (num_dims > SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "%u dimensional arrays are not supported", num_dims);
-	return NULL;
-     }
-
-   for (i = 0; i < num_dims; i++)
-     {
-	if (dims[i] < 0)
-	  {
-	     SLang_verror (SL_INVALID_PARM, "Size of array dim %u is less than 0", i);
-	     return NULL;
-	  }
-     }
-
-   cl = _SLclass_get_class (type);
-
-   at = (SLang_Array_Type *) SLmalloc (sizeof(SLang_Array_Type));
-   if (at == NULL)
-     return NULL;
-
-   SLMEMSET ((char*) at, 0, sizeof(SLang_Array_Type));
-
-   at->data_type = type;
-   at->cl = cl;
-   at->num_dims = num_dims;
-   at->num_refs = 1;
-
-   if (read_only) at->flags = SLARR_DATA_VALUE_IS_READ_ONLY;
-   switch (cl->cl_class_type)
-     {
-      case SLANG_CLASS_TYPE_VECTOR:
-      case SLANG_CLASS_TYPE_SCALAR:
-	break;
-
-      default:
-	at->flags |= SLARR_DATA_VALUE_IS_POINTER;
-     }
-
-   num_elements = 1;
-   for (i = 0; i < num_dims; i++)
-     {
-	at->dims [i] = dims[i];
-	num_elements = dims [i] * num_elements;
-     }
-
-   /* Now set the rest of the unused dimensions to 1.  This makes it easier
-    * when transposing arrays.
-    */
-   while (i < SLARRAY_MAX_DIMS)
-     at->dims[i++] = 1;
-
-   at->num_elements = num_elements;
-   at->index_fun = linear_get_data_addr;
-   at->sizeof_type = sizeof_type = cl->cl_sizeof_type;
-
-   if (data != NULL)
-     {
-	at->data = data;
-	return at;
-     }
-
-   size = num_elements * sizeof_type;
-
-   if (size == 0) size = 1;
-
-   if (NULL == (data = (VOID_STAR) SLmalloc (size)))
-     {
-	SLang_free_array (at);
-	return NULL;
-     }
-
-   if (no_init == 0)
-     SLMEMSET ((char *) data, 0, size);
-
-   at->data = data;
-
-   if ((cl->cl_init_array_object != NULL)
-       && (-1 == do_method_for_all_elements (at, new_object_element, NULL)))
-     {
-	SLang_free_array (at);
-	return NULL;
-     }
-   return at;
-}
-
-SLang_Array_Type *
-SLang_create_array (unsigned char type, int read_only, VOID_STAR data,
-		    int *dims, unsigned int num_dims)
-{
-   return SLang_create_array1 (type, read_only, data, dims, num_dims, 0);
-}
-
-int SLang_add_intrinsic_array (char *name,
-			       unsigned char type,
-			       int read_only,
-			       VOID_STAR data,
-			       unsigned int num_dims, ...)
-{
-   va_list ap;
-   unsigned int i;
-   int dims[SLARRAY_MAX_DIMS];
-   SLang_Array_Type *at;
-
-   if ((num_dims > SLARRAY_MAX_DIMS)
-       || (name == NULL)
-       || (data == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "Unable to create intrinsic array");
-	return -1;
-     }
-
-   va_start (ap, num_dims);
-   for (i = 0; i < num_dims; i++)
-     dims [i] = va_arg (ap, int);
-   va_end (ap);
-
-   at = SLang_create_array (type, read_only, data, dims, num_dims);
-   if (at == NULL)
-     return -1;
-   at->flags |= SLARR_DATA_VALUE_IS_INTRINSIC;
-
-   /* Note: The variable that refers to the intrinsic array is regarded as
-    * read-only.  That way, Array_Name = another_array; will fail.
-    */
-   if (-1 == SLadd_intrinsic_variable (name, (VOID_STAR) at, SLANG_ARRAY_TYPE, 1))
-     {
-	SLang_free_array (at);
-	return -1;
-     }
-   return 0;
-}
-
-static int pop_array_indices (int *dims, unsigned int num_dims)
-{
-   unsigned int n;
-   int i;
-
-   if (num_dims > SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_INVALID_PARM, "Array size not supported");
-	return -1;
-     }
-
-   n = num_dims;
-   while (n != 0)
-     {
-	n--;
-	if (-1 == SLang_pop_integer (&i))
-	  return -1;
-
-	dims[n] = i;
-     }
-
-   return 0;
-}
-
-int SLang_push_array (SLang_Array_Type *at, int free_flag)
-{
-   if (at == NULL)
-     return SLang_push_null ();
-
-   at->num_refs += 1;
-
-   if (0 == SLclass_push_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR) at))
-     {
-	if (free_flag)
-	  SLang_free_array (at);
-	return 0;
-     }
-
-   at->num_refs -= 1;
-
-   if (free_flag) SLang_free_array (at);
-   return -1;
-}
-
-/* This function gets called via expressions such as Double_Type[10, 20];
- */
-static int push_create_new_array (void)
-{
-   unsigned int num_dims;
-   SLang_Array_Type *at;
-   unsigned char type;
-   int dims [SLARRAY_MAX_DIMS];
-   int (*anew) (unsigned char, unsigned int);
-
-   num_dims = (SLang_Num_Function_Args - 1);
-
-   if (-1 == _SLang_pop_datatype (&type))
-     return -1;
-
-   anew = (_SLclass_get_class (type))->cl_anew;
-   if (anew != NULL)
-     return (*anew) (type, num_dims);
-
-   if (-1 == pop_array_indices (dims, num_dims))
-     return -1;
-
-   if (NULL == (at = SLang_create_array (type, 0, NULL, dims, num_dims)))
-     return -1;
-
-   return SLang_push_array (at, 1);
-}
-
-static int push_element_at_addr (SLang_Array_Type *at,
-				 VOID_STAR data, int allow_null)
-{
-   SLang_Class_Type *cl;
-
-   cl = at->cl;
-   if ((at->flags & SLARR_DATA_VALUE_IS_POINTER)
-       && (*(VOID_STAR *) data == NULL))
-     {
-	if (allow_null)
-	  return SLang_push_null ();
-
-	SLang_verror (SL_VARIABLE_UNINITIALIZED,
-		      "%s array has unitialized element", cl->cl_name);
-	return -1;
-     }
-
-   return (*cl->cl_apush)(at->data_type, data);
-}
-
-static int coerse_array_to_linear (SLang_Array_Type *at)
-{
-   SLarray_Range_Array_Type *range;
-   int *data;
-   int xmin, dx;
-   unsigned int i, imax;
-
-   /* FIXME: Priority = low.  This assumes that if an array is not linear, then
-    * it is a range.
-    */
-   if (0 == (at->flags & SLARR_DATA_VALUE_IS_RANGE))
-     return 0;
-
-   range = (SLarray_Range_Array_Type *) at->data;
-   xmin = range->first_index;
-   dx = range->delta;
-
-   imax = at->num_elements;
-   data = (int *) SLmalloc ((imax + 1) * sizeof (int));
-   if (data == NULL)
-     return -1;
-
-   for (i = 0; i < imax; i++)
-     {
-	data [i] = xmin;
-	xmin += dx;
-     }
-
-   SLfree ((char *) range);
-   at->data = (VOID_STAR) data;
-   at->flags &= ~SLARR_DATA_VALUE_IS_RANGE;
-   at->index_fun = linear_get_data_addr;
-   return 0;
-}
-
-static void
-free_index_objects (SLang_Object_Type *index_objs, unsigned int num_indices)
-{
-   unsigned int i;
-   SLang_Object_Type *obj;
-
-   for (i = 0; i < num_indices; i++)
-     {
-	obj = index_objs + i;
-	if (obj->data_type != 0)
-	  SLang_free_object (obj);
-     }
-}
-
-static int
-pop_indices (SLang_Object_Type *index_objs, unsigned int num_indices,
-	     int *is_index_array)
-{
-   unsigned int i;
-
-   SLMEMSET((char *) index_objs, 0, num_indices * sizeof (SLang_Object_Type));
-
-   *is_index_array = 0;
-
-   if (num_indices >= SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_INVALID_PARM, "too many indices for array");
-	return -1;
-     }
-
-   i = num_indices;
-   while (i != 0)
-     {
-	SLang_Object_Type *obj;
-
-	i--;
-	obj = index_objs + i;
-	if (-1 == _SLang_pop_object_of_type (SLANG_INT_TYPE, obj, 1))
-	  goto return_error;
-
-	if (obj->data_type == SLANG_ARRAY_TYPE)
-	  {
-	     SLang_Array_Type *at = obj->v.array_val;
-
-	     if (at->num_dims == 1)
-	       {
-		  if ((num_indices == 1)
-		      && (0 == (at->flags & SLARR_DATA_VALUE_IS_RANGE)))
-		    *is_index_array = 1;
-	       }
-	     else
-	       {
-		  SLang_verror (SL_INVALID_PARM, "expecting a 1-d index array");
-		  goto return_error;
-	       }
-	  }
-     }
-
-   return 0;
-
-   return_error:
-   free_index_objects (index_objs, num_indices);
-   return -1;
-}
-
-/* Here ind_at is a linear 1-d array of indices */
-static int
-check_index_array_ranges (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
-   int *indices, *indices_max;
-   unsigned int num_elements;
-
-   num_elements = at->num_elements;
-   indices = (int *) ind_at->data;
-   indices_max = indices + ind_at->num_elements;
-
-   while (indices < indices_max)
-     {
-	unsigned int d;
-
-	d = (unsigned int) *indices++;
-	if (d >= num_elements)
-	  {
-	     SLang_verror (SL_INVALID_PARM,
-			   "index-array is out of range");
-	     return -1;
-	  }
-     }
-   return 0;
-}
-
-static int
-transfer_n_elements (SLang_Array_Type *at, VOID_STAR dest_data, VOID_STAR src_data,
-		     unsigned int sizeof_type, unsigned int n, int is_ptr)
-{
-   unsigned char data_type;
-   SLang_Class_Type *cl;
-
-   if (is_ptr == 0)
-     {
-	SLMEMCPY ((char *) dest_data, (char *)src_data, n * sizeof_type);
-	return 0;
-     }
-
-   data_type = at->data_type;
-   cl = at->cl;
-
-   while (n != 0)
-     {
-	if (*(VOID_STAR *)dest_data != NULL)
-	  {
-	     (*cl->cl_destroy) (data_type, dest_data);
-	     *(VOID_STAR *) dest_data = NULL;
-	  }
-
-	if (*(VOID_STAR *) src_data == NULL)
-	  *(VOID_STAR *) dest_data = NULL;
-	else
-	  {
-	     if (-1 == (*cl->cl_acopy) (data_type, src_data, dest_data))
-	       /* No need to destroy anything */
-	       return -1;
-	  }
-
-	src_data = (VOID_STAR) ((char *)src_data + sizeof_type);
-	dest_data = (VOID_STAR) ((char *)dest_data + sizeof_type);
-
-	n--;
-     }
-
-   return 0;
-}
-
-int
-_SLarray_aget_transfer_elem (SLang_Array_Type *at, int *indices,
-			     VOID_STAR new_data, unsigned int sizeof_type, int is_ptr)
-{
-   VOID_STAR at_data;
-
-   /* Since 1 element is being transferred, there is not need to coerse
-    * the array to linear.
-    */
-   if (NULL == (at_data = get_data_addr (at, indices)))
-     return -1;
-
-   return transfer_n_elements (at, new_data, at_data, sizeof_type, 1, is_ptr);
-}
-
-/* Here the ind_at index-array is a 1-d array of indices.  This function
- * creates a 1-d array of made up of values of 'at' at the locations
- * specified by the indices.  The result is pushed.
- */
-static int
-aget_from_index_array (SLang_Array_Type *at,
-		       SLang_Array_Type *ind_at)
-{
-   SLang_Array_Type *new_at;
-   int *indices, *indices_max;
-   unsigned char *new_data, *src_data;
-   unsigned int sizeof_type;
-   int is_ptr;
-   
-   if (-1 == coerse_array_to_linear (at))
-     return -1;
-
-   if (-1 == coerse_array_to_linear (ind_at))
-     return -1;
-
-   if (-1 == check_index_array_ranges (at, ind_at))
-     return -1;
-
-   if (NULL == (new_at = SLang_create_array (at->data_type, 0, NULL, ind_at->dims, 1)))
-     return -1;
-
-   /* Since the index array is linear, I can address it directly */
-   indices = (int *) ind_at->data;
-   indices_max = indices + ind_at->num_elements;
-
-   src_data = (unsigned char *) at->data;
-   new_data = (unsigned char *) new_at->data;
-   sizeof_type = new_at->sizeof_type;
-   is_ptr = (new_at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
-   while (indices < indices_max)
-     {
-	unsigned int offset;
-
-	offset = sizeof_type * (unsigned int)*indices;
-	if (-1 == transfer_n_elements (at, (VOID_STAR) new_data,
-				       (VOID_STAR) (src_data + offset),
-				       sizeof_type, 1, is_ptr))
-	  {
-	     SLang_free_array (new_at);
-	     return -1;
-	  }
-
-	new_data += sizeof_type;
-	indices++;
-     }
-
-   return SLang_push_array (new_at, 1);
-}
-
-/* This is extremely ugly.  It is due to the fact that the index_objects
- * may contain ranges.  This is a utility function for the aget/aput
- * routines
- */
-static int
-convert_nasty_index_objs (SLang_Array_Type *at,
-			  SLang_Object_Type *index_objs,
-			  unsigned int num_indices,
-			  int **index_data,
-			  int *range_buf, int *range_delta_buf,
-			  int *max_dims,
-			  unsigned int *num_elements,
-			  int *is_array, int is_dim_array[SLARRAY_MAX_DIMS])
-{
-   unsigned int i, total_num_elements;
-   SLang_Array_Type *ind_at;
-
-   if (num_indices != at->num_dims)
-     {
-	SLang_verror (SL_INVALID_PARM, "Array requires %u indices", at->num_dims);
-	return -1;
-     }
-
-   *is_array = 0;
-   total_num_elements = 1;
-   for (i = 0; i < num_indices; i++)
-     {
-	int max_index, min_index;
-	SLang_Object_Type *obj;
-	int at_dims_i;
-
-	at_dims_i = at->dims[i];
-	obj = index_objs + i;
-	range_delta_buf [i] = 0;
-
-	if (obj->data_type == SLANG_INT_TYPE)
-	  {
-	     range_buf [i] = min_index = max_index = obj->v.int_val;
-	     max_dims [i] = 1;
-	     index_data[i] = range_buf + i;
-	     is_dim_array[i] = 0;
-	  }
-	else
-	  {
-	     *is_array = 1;
-	     is_dim_array[i] = 1;
-	     ind_at = obj->v.array_val;
-
-	     if (ind_at->flags & SLARR_DATA_VALUE_IS_RANGE)
-	       {
-		  SLarray_Range_Array_Type *r;
-		  int delta;
-		  int first_index, last_index;
-
-		  r = (SLarray_Range_Array_Type *) ind_at->data;
-
-		  /* In an array indexing context, range arrays have different
-		   * semantics.  Consider a[[0:10]].  Clearly this means elements
-		   * 0-10 of a.  But what does a[[0:-1]] mean?  By itself,
-		   * [0:-1] is a null matrix [].  But, it is useful in an
-		   * indexing context to allow -1 to refer to the last element
-		   * of the array.  Similarly, [-3:-1] refers to the last 3
-		   * elements.
-		   * 
-		   * However, [-1:-3] does not refer to any of the elements.
-		   */
-		  if ((first_index = r->first_index) < 0)
-		    {
-		       if (at_dims_i != 0)
-			 first_index = (at_dims_i + first_index) % at_dims_i;
-		    }
-
-		  if ((last_index = r->last_index) < 0)
-		    {
-		       if (at_dims_i != 0)
-			 last_index = (at_dims_i + last_index) % at_dims_i;
-		    }
-
-		  delta = r->delta;
-
-		  range_delta_buf [i] = delta;
-		  range_buf[i] = first_index;
-
-		  if (delta > 0)
-		    {
-		       if (first_index > last_index)
-			 max_dims[i] = min_index = max_index = 0;
-		       else
-			 {
-			    max_index = min_index = first_index;
-			    while (max_index + delta <= last_index)
-			      max_index += delta;
-			    max_dims [i] = 1 + (max_index - min_index) / delta;
-			 }
-		    }
-		  else
-		    {
-		       if (first_index < last_index)
-			 max_dims[i] = min_index = max_index = 0;
-		       else
-			 {
-			    min_index = max_index = first_index;
-			    while (min_index + delta >= last_index)
-			      min_index += delta;
-			    max_dims [i] = 1 + (max_index - min_index) / (-delta);
-			 }
-		    }
-	       }
-	     else
-	       {
-		  int *tmp, *tmp_max;
-
-		  if (0 == (max_dims[i] = ind_at->num_elements))
-		    {
-		       total_num_elements = 0;
-		       break;
-		    }
-
-		  tmp = (int *) ind_at->data;
-		  tmp_max = tmp + ind_at->num_elements;
-		  index_data [i] = tmp;
-
-		  min_index = max_index = *tmp;
-		  while (tmp < tmp_max)
-		    {
-		       if (max_index > *tmp)
-			 max_index = *tmp;
-		       if (min_index < *tmp)
-			 min_index = *tmp;
-
-		       tmp++;
-		    }
-	       }
-	  }
-
-	if ((at_dims_i == 0) && (max_dims[i] == 0))
-	  {
-	     total_num_elements = 0;
-	     continue;
-	  }
-
-	if (max_index < 0)
-	  max_index += at_dims_i;
-	if (min_index < 0)
-	  min_index += at_dims_i;
-
-	if ((min_index < 0) || (min_index >= at_dims_i)
-	    || (max_index < 0) || (max_index >= at_dims_i))
-	  {
-	     SLang_verror (SL_INVALID_PARM, "Array index %u ([%d:%d]) out of allowed range [0->%d]",
-			   i, min_index, max_index, at_dims_i);
-	     return -1;
-	  }
-
-	total_num_elements = total_num_elements * max_dims[i];
-     }
-
-   *num_elements = total_num_elements;
-   return 0;
-}
-
-/* This routine pushes a 1-d vector of values from 'at' indexed by
- * the objects 'index_objs'.  These objects can either be integers or
- * 1-d integer arrays.  The fact that the 1-d arrays can be ranges
- * makes this look ugly.
- */
-static int
-aget_from_indices (SLang_Array_Type *at,
-		   SLang_Object_Type *index_objs, unsigned int num_indices)
-{
-   int *index_data [SLARRAY_MAX_DIMS];
-   int range_buf [SLARRAY_MAX_DIMS];
-   int range_delta_buf [SLARRAY_MAX_DIMS];
-   int max_dims [SLARRAY_MAX_DIMS];
-   unsigned int i, num_elements;
-   SLang_Array_Type *new_at;
-   int map_indices[SLARRAY_MAX_DIMS];
-   int indices [SLARRAY_MAX_DIMS];
-   unsigned int sizeof_type;
-   int is_ptr, ret, is_array;
-   char *new_data;
-   SLang_Class_Type *cl;
-   int is_dim_array[SLARRAY_MAX_DIMS];
-
-   if (-1 == convert_nasty_index_objs (at, index_objs, num_indices,
-				       index_data, range_buf, range_delta_buf,
-				       max_dims, &num_elements, &is_array,
-				       is_dim_array))
-     return -1;
-
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-   sizeof_type = at->sizeof_type;
-
-   cl = _SLclass_get_class (at->data_type);
-
-   if ((is_array == 0) && (num_elements == 1))
-     {
-	new_data = (char *)cl->cl_transfer_buf;
-	memset (new_data, 0, sizeof_type);
-	new_at = NULL;
-     }
-   else
-     {
-	int i_num_elements = (int)num_elements;
-
-	new_at = SLang_create_array (at->data_type, 0, NULL, &i_num_elements, 1);
-	if (NULL == new_at)
-	  return -1;
-	if (num_elements == 0)
-	  return SLang_push_array (new_at, 1);
-
-	new_data = (char *)new_at->data;
-     }
-
-   SLMEMSET((char *) map_indices, 0, sizeof(map_indices));
-   do
-     {
-	for (i = 0; i < num_indices; i++)
-	  {
-	     int j;
-
-	     j = map_indices[i];
-
-	     if (0 != range_delta_buf[i])
-	       indices[i] = range_buf[i] + j * range_delta_buf[i];
-	     else
-	       indices[i] = index_data [i][j];
-	  }
-
-	if (-1 == _SLarray_aget_transfer_elem (at, indices, (VOID_STAR)new_data, sizeof_type, is_ptr))
-	  {
-	     SLang_free_array (new_at);
-	     return -1;
-	  }
-	new_data += sizeof_type;
-     }
-   while (0 == next_index (map_indices, max_dims, num_indices));
-
-   if (new_at != NULL)
-     {
-	int num_dims = 0;
-	/* Fixup dimensions on array */
-	for (i = 0; i < num_indices; i++)
-	  {
-	     if (is_dim_array[i]) /* was: (max_dims[i] > 1) */
-	       {
-		  new_at->dims[num_dims] = max_dims[i];
-		  num_dims++;
-	       }
-	  }
-
-	if (num_dims != 0) new_at->num_dims = num_dims;
-	return SLang_push_array (new_at, 1);
-     }
-
-   /* Here new_data is a whole new copy, so free it after the push */
-   new_data -= sizeof_type;
-   if (is_ptr && (*(VOID_STAR *)new_data == NULL))
-     ret = SLang_push_null ();
-   else
-     {
-	ret = (*cl->cl_apush) (at->data_type, (VOID_STAR)new_data);
-	(*cl->cl_adestroy) (at->data_type, (VOID_STAR)new_data);
-     }
-
-   return ret;
-}
-
-static int push_string_as_array (unsigned char *s, unsigned int len)
-{
-   int ilen;
-   SLang_Array_Type *at;
-
-   ilen = (int) len;
-
-   at = SLang_create_array (SLANG_UCHAR_TYPE, 0, NULL, &ilen, 1);
-   if (at == NULL)
-     return -1;
-
-   memcpy ((char *)at->data, (char *)s, len);
-   return SLang_push_array (at, 1);
-}
-
-static int pop_array_as_string (char **sp)
-{
-   SLang_Array_Type *at;
-   int ret;
-
-   *sp = NULL;
-
-   if (-1 == SLang_pop_array_of_type (&at, SLANG_UCHAR_TYPE))
-     return -1;
-
-   ret = 0;
-
-   if (NULL == (*sp = SLang_create_nslstring ((char *) at->data, at->num_elements)))
-     ret = -1;
-
-   SLang_free_array (at);
-   return ret;
-}
-
-static int pop_array_as_bstring (SLang_BString_Type **bs)
-{
-   SLang_Array_Type *at;
-   int ret;
-
-   *bs = NULL;
-
-   if (-1 == SLang_pop_array_of_type (&at, SLANG_UCHAR_TYPE))
-     return -1;
-
-   ret = 0;
-
-   if (NULL == (*bs = SLbstring_create ((unsigned char *) at->data, at->num_elements)))
-     ret = -1;
-
-   SLang_free_array (at);
-   return ret;
-}
-
-static int aget_from_array (unsigned int num_indices)
-{
-   SLang_Array_Type *at;
-   SLang_Object_Type index_objs [SLARRAY_MAX_DIMS];
-   int ret;
-   int is_index_array;
-   unsigned int i;
-
-   if (num_indices > SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_INVALID_PARM, "Number of dims must be less than %d", SLARRAY_MAX_DIMS);
-	return -1;
-     }
-
-   if (-1 == pop_array (&at, 1))
-     return -1;
-
-   if (-1 == pop_indices (index_objs, num_indices, &is_index_array))
-     {
-	SLang_free_array (at);
-	return -1;
-     }
-
-   if (is_index_array == 0)
-     ret = aget_from_indices (at, index_objs, num_indices);
-   else
-     ret = aget_from_index_array (at, index_objs[0].v.array_val);
-
-   SLang_free_array (at);
-   for (i = 0; i < num_indices; i++)
-     SLang_free_object (index_objs + i);
-
-   return ret;
-}
-
-static int push_string_element (unsigned char type, unsigned char *s, unsigned int len)
-{
-   int i;
-
-   if (SLang_peek_at_stack () == SLANG_ARRAY_TYPE)
-     {
-	char *str;
-
-	/* The indices are array values.  So, do this: */
-	if (-1 == push_string_as_array (s, len))
-	  return -1;
-
-	if (-1 == aget_from_array (1))
-	  return -1;
-
-	if (type == SLANG_BSTRING_TYPE)
-	  {
-	     SLang_BString_Type *bs;
-	     int ret;
-
-	     if (-1 == pop_array_as_bstring (&bs))
-	       return -1;
-
-	     ret = SLang_push_bstring (bs);
-	     SLbstring_free (bs);
-	     return ret;
-	  }
-
-	if (-1 == pop_array_as_string (&str))
-	  return -1;
-	return _SLang_push_slstring (str);   /* frees s upon error */
-     }
-
-   if (-1 == SLang_pop_integer (&i))
-     return -1;
-
-   if (i < 0) i = i + (int)len;
-   if ((unsigned int) i > len)
-     i = len;			       /* get \0 character --- bstrings include it as well */
-
-   i = s[(unsigned int) i];
-
-   return SLang_push_integer (i);
-}
-
-/* ARRAY[i, j, k] generates code: __args i j ...k ARRAY __aput/__aget
- * Here i, j, ... k may be a mixture of integers and 1-d arrays, or
- * a single 2-d array of indices.  The 2-d index array is generated by the
- * 'where' function.
- *
- * If ARRAY is of type DataType, then this function will create an array of
- * the appropriate type.  In that case, the indices i, j, ..., k must be
- * integers.
- */
-int _SLarray_aget (void)
-{
-   unsigned int num_indices;
-   int type;
-   int (*aget_fun) (unsigned char, unsigned int);
-
-   num_indices = (SLang_Num_Function_Args - 1);
-
-   type = SLang_peek_at_stack ();
-   switch (type)
-     {
-      case -1:
-	return -1;		       /* stack underflow */
-
-      case SLANG_DATATYPE_TYPE:
-	return push_create_new_array ();
-
-      case SLANG_BSTRING_TYPE:
-	if (1 == num_indices)
-	  {
-	     SLang_BString_Type *bs;
-	     int ret;
-	     unsigned int len;
-	     unsigned char *s;
-
-	     if (-1 == SLang_pop_bstring (&bs))
-	       return -1;
-
-	     if (NULL == (s = SLbstring_get_pointer (bs, &len)))
-	       ret = -1;
-	     else
-	       ret = push_string_element (type, s, len);
-
-	     SLbstring_free (bs);
-	     return ret;
-	  }
-	break;
-
-      case SLANG_STRING_TYPE:
-	if (1 == num_indices)
-	  {
-	     char *s;
-	     int ret;
-
-	     if (-1 == SLang_pop_slstring (&s))
-	       return -1;
-
-	     ret = push_string_element (type, (unsigned char *)s, strlen (s));
-	     SLang_free_slstring (s);
-	     return ret;
-	  }
-	break;
-
-      case SLANG_ARRAY_TYPE:
-	break;
-
-      default:
-	aget_fun = _SLclass_get_class (type)->cl_aget;
-	if (NULL != aget_fun)
-	  return (*aget_fun) (type, num_indices);
-     }
-
-   return aget_from_array (num_indices);
-}
-
-int
-_SLarray_aput_transfer_elem (SLang_Array_Type *at, int *indices,
-			     VOID_STAR data_to_put, unsigned int sizeof_type, int is_ptr)
-{
-   VOID_STAR at_data;
-
-   /* Since 1 element is being transferred, there is no need to coerse
-    * the array to linear.
-    */
-   if (NULL == (at_data = get_data_addr (at, indices)))
-     return -1;
-
-   return transfer_n_elements (at, at_data, data_to_put, sizeof_type, 1, is_ptr);
-}
-
-static int
-aput_get_array_to_put (SLang_Class_Type *cl, unsigned int num_elements, int allow_array,
-		       SLang_Array_Type **at_ptr, char **data_to_put, unsigned int *data_increment)
-{
-   unsigned char data_type;
-   SLang_Array_Type *at;
-
-   *at_ptr = NULL;
-
-   data_type = cl->cl_data_type;
-   if (-1 == SLclass_typecast (data_type, 1, allow_array))
-     return -1;
-
-   if ((data_type != SLANG_ARRAY_TYPE)
-       && (data_type != SLANG_ANY_TYPE)
-       && (SLANG_ARRAY_TYPE == SLang_peek_at_stack ()))
-     {
-	if (-1 == SLang_pop_array (&at, 0))
-	  return -1;
-
-	if ((at->num_elements != num_elements)
-#if 0
-	    || (at->num_dims != 1)
-#endif
-	    )
-	  {
-	     SLang_verror (SL_TYPE_MISMATCH, "Array size is inappropriate for use with index-array");
-	     SLang_free_array (at);
-	     return -1;
-	  }
-
-	*data_to_put = (char *) at->data;
-	*data_increment = at->sizeof_type;
-	*at_ptr = at;
-	return 0;
-     }
-
-   *data_increment = 0;
-   *data_to_put = (char *) cl->cl_transfer_buf;
-
-   if (-1 == (*cl->cl_apop)(data_type, (VOID_STAR) *data_to_put))
-     return -1;
-
-   return 0;
-}
-
-static int
-aput_from_indices (SLang_Array_Type *at,
-		   SLang_Object_Type *index_objs, unsigned int num_indices)
-{
-   int *index_data [SLARRAY_MAX_DIMS];
-   int range_buf [SLARRAY_MAX_DIMS];
-   int range_delta_buf [SLARRAY_MAX_DIMS];
-   int max_dims [SLARRAY_MAX_DIMS];
-   unsigned int i, num_elements;
-   SLang_Array_Type *bt;
-   int map_indices[SLARRAY_MAX_DIMS];
-   int indices [SLARRAY_MAX_DIMS];
-   unsigned int sizeof_type;
-   int is_ptr, is_array, ret;
-   char *data_to_put;
-   unsigned int data_increment;
-   SLang_Class_Type *cl;
-   int is_dim_array [SLARRAY_MAX_DIMS];
-
-   if (-1 == convert_nasty_index_objs (at, index_objs, num_indices,
-				       index_data, range_buf, range_delta_buf,
-				       max_dims, &num_elements, &is_array,
-				       is_dim_array))
-     return -1;
-
-   cl = at->cl;
-
-   if (-1 == aput_get_array_to_put (cl, num_elements, is_array,
-				    &bt, &data_to_put, &data_increment))
-     return -1;
-
-   sizeof_type = at->sizeof_type;
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
-   ret = -1;
-
-   SLMEMSET((char *) map_indices, 0, sizeof(map_indices));
-   if (num_elements) do
-     {
-	for (i = 0; i < num_indices; i++)
-	  {
-	     int j;
-
-	     j = map_indices[i];
-
-	     if (0 != range_delta_buf[i])
-	       indices[i] = range_buf[i] + j * range_delta_buf[i];
-	     else
-	       indices[i] = index_data [i][j];
-	  }
-
-	if (-1 == _SLarray_aput_transfer_elem (at, indices, (VOID_STAR)data_to_put, sizeof_type, is_ptr))
-	  goto return_error;
-
-	data_to_put += data_increment;
-     }
-   while (0 == next_index (map_indices, max_dims, num_indices));
-
-   ret = 0;
-
-   /* drop */
-
-   return_error:
-   if (bt == NULL)
-     {
-	if (is_ptr)
-	  (*cl->cl_destroy) (cl->cl_data_type, (VOID_STAR) data_to_put);
-     }
-   else SLang_free_array (bt);
-
-   return ret;
-}
-
-static int
-aput_from_index_array (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
-   int *indices, *indices_max;
-   unsigned int sizeof_type;
-   char *data_to_put, *dest_data;
-   unsigned int data_increment;
-   int is_ptr;
-   SLang_Array_Type *bt;
-   SLang_Class_Type *cl;
-   int ret;
-
-   if (-1 == coerse_array_to_linear (at))
-     return -1;
-
-   if (-1 == coerse_array_to_linear (ind_at))
-     return -1;
-
-   if (-1 == check_index_array_ranges (at, ind_at))
-     return -1;
-
-   sizeof_type = at->sizeof_type;
-
-   cl = at->cl;
-
-   /* Note that if bt is returned as non NULL, then the array is a linear
-    * one.
-    */
-   if (-1 == aput_get_array_to_put (cl, ind_at->num_elements, 1,
-				    &bt, &data_to_put, &data_increment))
-     return -1;
-
-   /* Since the index array is linear, I can address it directly */
-   indices = (int *) ind_at->data;
-   indices_max = indices + ind_at->num_elements;
-
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-   dest_data = (char *) at->data;
-
-   ret = -1;
-   while (indices < indices_max)
-     {
-	unsigned int offset;
-
-	offset = sizeof_type * (unsigned int)*indices;
-
-	if (-1 == transfer_n_elements (at, (VOID_STAR) (dest_data + offset),
-				       (VOID_STAR) data_to_put, sizeof_type, 1,
-				       is_ptr))
-	  goto return_error;
-
-	indices++;
-	data_to_put += data_increment;
-     }
-
-   ret = 0;
-   /* Drop */
-
-   return_error:
-
-   if (bt == NULL)
-     {
-	if (is_ptr)
-	  (*cl->cl_destroy) (cl->cl_data_type, (VOID_STAR)data_to_put);
-     }
-   else SLang_free_array (bt);
-
-   return ret;
-}
-
-/* ARRAY[i, j, k] = generates code: __args i j k ARRAY __aput
- */
-int _SLarray_aput (void)
-{
-   unsigned int num_indices;
-   SLang_Array_Type *at;
-   SLang_Object_Type index_objs [SLARRAY_MAX_DIMS];
-   int ret;
-   int is_index_array;
-   int (*aput_fun) (unsigned char, unsigned int);
-   int type;
-
-   ret = -1;
-   num_indices = (SLang_Num_Function_Args - 1);
-
-   type = SLang_peek_at_stack ();
-   switch (type)
-     {
-      case -1:
-	return -1;
-
-      case SLANG_ARRAY_TYPE:
-	break;
-
-      default:
-	if (NULL != (aput_fun = _SLclass_get_class (type)->cl_aput))
-	  return (*aput_fun) (type, num_indices);
-	break;
-     }
-
-   if (-1 == SLang_pop_array (&at, 0))
-     return -1;
-
-   if (at->flags & SLARR_DATA_VALUE_IS_READ_ONLY)
-     {
-	SLang_verror (SL_READONLY_ERROR, "%s Array is read-only",
-		      SLclass_get_datatype_name (at->data_type));
-	SLang_free_array (at);
-	return -1;
-     }
-
-   if (-1 == pop_indices (index_objs, num_indices, &is_index_array))
-     {
-	SLang_free_array (at);
-	return -1;
-     }
-
-   if (is_index_array == 0)
-     ret = aput_from_indices (at, index_objs, num_indices);
-   else
-     ret = aput_from_index_array (at, index_objs[0].v.array_val);
-
-   SLang_free_array (at);
-   free_index_objects (index_objs, num_indices);
-   return ret;
-}
-
-/* This is for 1-d matrices only.  It is used by the sort function */
-static int push_element_at_index (SLang_Array_Type *at, int indx)
-{
-   VOID_STAR data;
-
-   if (NULL == (data = get_data_addr (at, &indx)))
-     return -1;
-
-   return push_element_at_addr (at, (VOID_STAR) data, 1);
-}
-
-static SLang_Name_Type *Sort_Function;
-static SLang_Array_Type *Sort_Array;
-
-static int sort_cmp_fun (int *a, int *b)
-{
-   int cmp;
-
-   if (SLang_Error
-       || (-1 == push_element_at_index (Sort_Array, *a))
-       || (-1 == push_element_at_index (Sort_Array, *b))
-       || (-1 == SLexecute_function (Sort_Function))
-       || (-1 == SLang_pop_integer (&cmp)))
-     {
-	/* DO not allow qsort to loop forever.  Return something meaningful */
-	if (*a > *b) return 1;
-	if (*a < *b) return -1;
-	return 0;
-     }
-
-   return cmp;
-}
-
-static int builtin_sort_cmp_fun (int *a, int *b)
-{
-   VOID_STAR a_data;
-   VOID_STAR b_data;
-   SLang_Class_Type *cl;
-   
-   cl = Sort_Array->cl;
-
-   if ((SLang_Error == 0)
-       && (NULL != (a_data = get_data_addr (Sort_Array, a)))
-       && (NULL != (b_data = get_data_addr (Sort_Array, b))))
-     {
-	int cmp;
-
-	if ((Sort_Array->flags & SLARR_DATA_VALUE_IS_POINTER)
-	    && ((*(VOID_STAR *) a_data == NULL) || (*(VOID_STAR *) a_data == NULL)))
-	  {
-	     SLang_verror (SL_VARIABLE_UNINITIALIZED,
-			   "%s array has unitialized element", cl->cl_name);
-	  }
-	else if (0 == (*cl->cl_cmp)(Sort_Array->data_type, a_data, b_data, &cmp))
-	  return cmp;
-     }
-       
-       
-   if (*a > *b) return 1;
-   if (*a == *b) return 0;
-   return -1;
-}
-
-static void sort_array_internal (SLang_Array_Type *at_str, 
-				 SLang_Name_Type *entry,
-				 int (*sort_fun)(int *, int *))
-{
-   SLang_Array_Type *ind_at;
-   /* This is a silly hack to make up for braindead compilers and the lack of
-    * uniformity in prototypes for qsort.
-    */
-   void (*qsort_fun) (char *, unsigned int, int, int (*)(int *, int *));
-   int *indx;
-   int i, n;
-   int dims[1];
-
-   if (Sort_Array != NULL)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "array_sort is not recursive");
-	return;
-     }
-
-   n = at_str->num_elements;
-
-   if (at_str->num_dims != 1)
-     {
-	SLang_verror (SL_INVALID_PARM, "sort is restricted to 1 dim arrays");
-	return;
-     }
-
-   dims [0] = n;
-
-   if (NULL == (ind_at = SLang_create_array (SLANG_INT_TYPE, 0, NULL, dims, 1)))
-     return;
-
-   indx = (int *) ind_at->data;
-   for (i = 0; i < n; i++) indx[i] = i;
-
-   if (n > 1)
-     {
-	qsort_fun = (void (*)(char *, unsigned int, int, int (*)(int *,
-								 int *)))
-	  qsort;
-
-	Sort_Array = at_str;
-	Sort_Function = entry;
-	(*qsort_fun) ((char *) indx, n, sizeof (int), sort_fun);
-     }
-
-   Sort_Array = NULL;
-   (void) SLang_push_array (ind_at, 1);
-}
-
-static void sort_array (void)
-{
-   SLang_Name_Type *entry;
-   SLang_Array_Type *at;
-   int (*sort_fun) (int *, int *);
-
-   if (SLang_Num_Function_Args != 1)
-     {
-	sort_fun = sort_cmp_fun;
-
-	if (NULL == (entry = SLang_pop_function ()))
-	  return;
-
-	if (-1 == SLang_pop_array (&at, 1))
-	  return;
-     }
-   else
-     {
-	sort_fun = builtin_sort_cmp_fun;
-	if (-1 == SLang_pop_array (&at, 1))
-	  return;
-	if (at->cl->cl_cmp == NULL)
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, 
-			   "%s does not have a predefined sorting method",
-			   at->cl->cl_name);
-	     SLang_free_array (at);
-	     return;
-	  }
-	entry = NULL;
-     }
-
-   sort_array_internal (at, entry, sort_fun);
-   SLang_free_array (at);
-   SLang_free_function (entry);
-}
-
-static void bstring_to_array (SLang_BString_Type *bs)
-{
-   unsigned char *s;
-   unsigned int len;
-   
-   if (NULL == (s = SLbstring_get_pointer (bs, &len)))
-     (void) SLang_push_null ();
-   else
-     (void) push_string_as_array (s, len);
-}
-
-static void array_to_bstring (SLang_Array_Type *at)
-{
-   unsigned int nbytes;
-   SLang_BString_Type *bs;
-
-   nbytes = at->num_elements * at->sizeof_type;
-   bs = SLbstring_create ((unsigned char *)at->data, nbytes);
-   (void) SLang_push_bstring (bs);
-   SLbstring_free (bs);
-}
-
-static void init_char_array (void)
-{
-   SLang_Array_Type *at;
-   char *s;
-   unsigned int n, ndim;
-
-   if (SLang_pop_slstring (&s)) return;
-
-   if (-1 == SLang_pop_array (&at, 0))
-     goto free_and_return;
-
-   if (at->data_type != SLANG_CHAR_TYPE)
-     {
-	SLang_doerror("Operation requires character array");
-	goto free_and_return;
-     }
-
-   n = strlen (s);
-   ndim = at->num_elements;
-   if (n > ndim)
-     {
-	SLang_doerror("String too big to init array");
-	goto free_and_return;
-     }
-
-   strncpy((char *) at->data, s, ndim);
-   /* drop */
-
-   free_and_return:
-   SLang_free_array (at);
-   SLang_free_slstring (s);
-}
-
-static void array_info (void)
-{
-   SLang_Array_Type *at, *bt;
-   int num_dims;
-
-   if (-1 == pop_array (&at, 1))
-     return;
-
-   num_dims = (int)at->num_dims;
-
-   if (NULL != (bt = SLang_create_array (SLANG_INT_TYPE, 0, NULL, &num_dims, 1)))
-     {
-	int *bdata;
-	int i;
-	int *a_dims;
-
-	a_dims = at->dims;
-	bdata = (int *) bt->data;
-	for (i = 0; i < num_dims; i++) bdata [i] = a_dims [i];
-
-	if (0 == SLang_push_array (bt, 1))
-	  {
-	     (void) SLang_push_integer ((int) at->num_dims);
-	     (void) _SLang_push_datatype (at->data_type);
-	  }
-     }
-
-   SLang_free_array (at);
-}
-
-static VOID_STAR range_get_data_addr (SLang_Array_Type *at, int *dims)
-{
-   static int value;
-   SLarray_Range_Array_Type *r;
-   int d;
-
-   d = *dims;
-   r = (SLarray_Range_Array_Type *)at->data;
-
-   if (d < 0)
-     d += at->dims[0];
-
-   value = r->first_index + d * r->delta;
-   return (VOID_STAR) &value;
-}
-
-static SLang_Array_Type *inline_implicit_int_array (int *xminptr, int *xmaxptr, int *dxptr)
-{
-   int delta;
-   SLang_Array_Type *at;
-   int dims, idims;
-   SLarray_Range_Array_Type *data;
-
-   if (dxptr == NULL) delta = 1;
-   else delta = *dxptr;
-
-   if (delta == 0)
-     {
-	SLang_verror (SL_INVALID_PARM, "range-array increment must be non-zero");
-	return NULL;
-     }
-
-   data = (SLarray_Range_Array_Type *) SLmalloc (sizeof (SLarray_Range_Array_Type));
-   if (data == NULL)
-     return NULL;
-
-   SLMEMSET((char *) data, 0, sizeof (SLarray_Range_Array_Type));
-   data->delta = delta;
-   dims = 0;
-
-   if (xminptr != NULL)
-     data->first_index = *xminptr;
-   else
-     data->first_index = 0;
-
-   if (xmaxptr != NULL)
-     data->last_index = *xmaxptr;
-   else
-     data->last_index = -1;
-
-/*   if ((xminptr != NULL) && (xmaxptr != NULL))
-     { */
-	idims = 1 + (data->last_index - data->first_index) / delta;
-	if (idims > 0)
-	  dims = idims;
-    /* } */
-
-   if (NULL == (at = SLang_create_array (SLANG_INT_TYPE, 0, (VOID_STAR) data, &dims, 1)))
-     return NULL;
-
-   at->index_fun = range_get_data_addr;
-   at->flags |= SLARR_DATA_VALUE_IS_RANGE;
-
-   return at;
-}
-
-#if SLANG_HAS_FLOAT
-static SLang_Array_Type *inline_implicit_floating_array (unsigned char type,
-							 double *xminptr, double *xmaxptr, double *dxptr)
-{
-   int n, i;
-   SLang_Array_Type *at;
-   int dims;
-   double xmin, xmax, dx;
-
-   if ((xminptr == NULL) || (xmaxptr == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "range-array has unknown size");
-	return NULL;
-     }
-   xmin = *xminptr;
-   xmax = *xmaxptr;
-   if (dxptr == NULL) dx = 1.0;
-   else dx = *dxptr;
-
-   if (dx == 0.0)
-     {
-	SLang_doerror ("range-array increment must be non-zero");
-	return NULL;
-     }
-
-   /* I have convinced myself that it is better to use semi-open intervals
-    * because of less ambiguities.  So, [a:b:c] will represent the set of
-    * values a, a + c, a + 2c ... a + nc
-    * such that a + nc < b.  That is, b lies outside the interval.
-    */
-
-   /* Allow for roundoff by adding 0.5 before truncation */
-   n = (int)(1.5 + ((xmax - xmin) / dx));
-   if (n <= 0)
-     n = 0;
-   else
-     {
-	double last = xmin + (n-1) * dx;
-
-	if (dx > 0.0)
-	  {
-	     if (last >= xmax)
-	       n -= 1;
-	  }
-	else if (last <= xmax)
-	  n -= 1;
-     }
-
-   dims = n;
-   if (NULL == (at = SLang_create_array1 (type, 0, NULL, &dims, 1, 1)))
-     return NULL;
-
-   if (type == SLANG_DOUBLE_TYPE)
-     {
-	double *ptr;
-
-	ptr = (double *) at->data;
-
-	for (i = 0; i < n; i++)
-	  ptr[i] = xmin + i * dx;
-     }
-   else
-     {
-	float *ptr;
-
-	ptr = (float *) at->data;
-
-	for (i = 0; i < n; i++)
-	  ptr[i] = (float) (xmin + i * dx);
-     }
-   return at;
-}
-#endif
-
-/* FIXME: Priority=medium
- * This needs to be updated to work with all integer types.
- */
-int _SLarray_inline_implicit_array (void)
-{
-   int int_vals[3];
-#if SLANG_HAS_FLOAT
-   double double_vals[3];
-#endif
-   int has_vals[3];
-   unsigned int i, count;
-   SLang_Array_Type *at;
-   int precedence;
-   unsigned char type;
-   int is_int;
-
-   count = SLang_Num_Function_Args;
-
-   if (count == 2)
-     has_vals [2] = 0;
-   else if (count != 3)
-     {
-	SLang_doerror ("wrong number of arguments to __implicit_inline_array");
-	return -1;
-     }
-
-#if SLANG_HAS_FLOAT
-   is_int = 1;
-#endif
-
-   type = 0;
-   precedence = 0;
-
-   i = count;
-   while (i--)
-     {
-	int this_type, this_precedence;
-
-	if (-1 == (this_type = SLang_peek_at_stack ()))
-	  return -1;
-
-	this_precedence = _SLarith_get_precedence ((unsigned char) this_type);
-	if (precedence < this_precedence)
-	  {
-	     type = (unsigned char) this_type;
-	     precedence = this_precedence;
-	  }
-
-	has_vals [i] = 1;
-
-	switch (this_type)
-	  {
-	   case SLANG_NULL_TYPE:
-	     has_vals[i] = 0;
-	     (void) SLdo_pop ();
-	     break;
-
-#if SLANG_HAS_FLOAT
-	   case SLANG_DOUBLE_TYPE:
-	   case SLANG_FLOAT_TYPE:
-	     if (-1 == SLang_pop_double (double_vals + i, NULL, NULL))
-	       return -1;
-	     is_int = 0;
-	     break;
-#endif
-	   default:
-	     if (-1 == SLang_pop_integer (int_vals + i))
-	       return -1;
-	     double_vals[i] = (double) int_vals[i];
-	  }
-     }
-
-#if SLANG_HAS_FLOAT
-   if (is_int == 0)
-     at = inline_implicit_floating_array (type,
-					  (has_vals[0] ? &double_vals[0] : NULL),
-					  (has_vals[1] ? &double_vals[1] : NULL),
-					  (has_vals[2] ? &double_vals[2] : NULL));
-   else
-#endif
-     at = inline_implicit_int_array ((has_vals[0] ? &int_vals[0] : NULL),
-				     (has_vals[1] ? &int_vals[1] : NULL),
-				     (has_vals[2] ? &int_vals[2] : NULL));
-
-   if (at == NULL)
-     return -1;
-
-   return SLang_push_array (at, 1);
-}
-
-int _SLarray_wildcard_array (void)
-{
-   SLang_Array_Type *at;
-     
-   if (NULL == (at = inline_implicit_int_array (NULL, NULL, NULL)))
-     return -1;
-
-   return SLang_push_array (at, 1);
-}
-
-static SLang_Array_Type *concat_arrays (unsigned int count)
-{
-   SLang_Array_Type **arrays;
-   SLang_Array_Type *at, *bt;
-   unsigned int i;
-   int num_elements;
-   unsigned char type;
-   char *src_data, *dest_data;
-   int is_ptr;
-   unsigned int sizeof_type;
-   int max_dims, min_dims, max_rows, min_rows;
-
-   arrays = (SLang_Array_Type **)SLmalloc (count * sizeof (SLang_Array_Type *));
-   if (arrays == NULL)
-     {
-	SLdo_pop_n (count);
-	return NULL;
-     }
-   SLMEMSET((char *) arrays, 0, count * sizeof(SLang_Array_Type *));
-
-   at = NULL;
-
-   num_elements = 0;
-   i = count;
-
-   while (i != 0)
-     {
-	i--;
-
-	if (-1 == SLang_pop_array (&bt, 1))
-	  goto free_and_return;
-
-	arrays[i] = bt;
-	num_elements += (int)bt->num_elements;
-     }
-
-   type = arrays[0]->data_type;
-   max_dims = min_dims = arrays[0]->num_dims;
-   min_rows = max_rows = arrays[0]->dims[0];
-
-   for (i = 1; i < count; i++)
-     {
-	SLang_Array_Type *ct;
-	int num;
-
-	bt = arrays[i];
-
-	num = bt->num_dims;
-	if (num > max_dims) max_dims = num;
-	if (num < min_dims) min_dims = num;
-
-	num = bt->dims[0];
-	if (num > max_rows) max_rows = num;
-	if (num < min_rows) min_rows = num;
-
-	if (type == bt->data_type)
-	  continue;
-
-	if (1 != _SLarray_typecast (bt->data_type, (VOID_STAR) &bt, 1,
-				    type, (VOID_STAR) &ct, 1))
-	  goto free_and_return;
-
-	SLang_free_array (bt);
-	arrays [i] = ct;
-     }
-
-   if (NULL == (at = SLang_create_array (type, 0, NULL, &num_elements, 1)))
-     goto free_and_return;
-
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-   sizeof_type = at->sizeof_type;
-   dest_data = (char *) at->data;
-
-   for (i = 0; i < count; i++)
-     {
-	bt = arrays[i];
-
-	src_data = (char *) bt->data;
-	num_elements = bt->num_elements;
-
-	if (-1 == transfer_n_elements (bt, (VOID_STAR)dest_data, (VOID_STAR)src_data, sizeof_type,
-				       num_elements, is_ptr))
-	  {
-	     SLang_free_array (at);
-	     at = NULL;
-	     goto free_and_return;
-	  }
-
-	dest_data += num_elements * sizeof_type;
-     }
-
-   /* If the arrays are all 1-d, and all the same size, then reshape to a
-    * 2-d array.  This will allow us to do, e.g.
-    * a = [[1,2], [3,4]]
-    * to specifiy a 2-d.
-    * Someday I will generalize this.
-    */
-   if ((max_dims == min_dims) && (max_dims == 1) && (min_rows == max_rows))
-     {
-	at->num_dims = 2;
-	at->dims[0] = count;
-	at->dims[1] = min_rows;
-     }
-
-   free_and_return:
-
-   for (i = 0; i < count; i++)
-     SLang_free_array (arrays[i]);
-   SLfree ((char *) arrays);
-
-   return at;
-}
-
-int _SLarray_inline_array (void)
-{
-   SLang_Object_Type *obj;
-   unsigned char type, this_type;
-   unsigned int count;
-   SLang_Array_Type *at;
-
-   obj = _SLStack_Pointer;
-
-   count = SLang_Num_Function_Args;
-   type = 0;
-
-   while ((count > 0) && (--obj >= _SLRun_Stack))
-     {
-	this_type = obj->data_type;
-
-	if (type == 0)
-	  type = this_type;
-
-	if ((type == this_type) || (type == SLANG_ARRAY_TYPE))
-	  {
-	     count--;
-	     continue;
-	  }
-
-	switch (this_type)
-	  {
-	   case SLANG_ARRAY_TYPE:
-	     type = SLANG_ARRAY_TYPE;
-	     break;
-
-	   case SLANG_INT_TYPE:
-	     switch (type)
-	       {
-#if SLANG_HAS_FLOAT
-		case SLANG_DOUBLE_TYPE:
-		  break;
-#endif
-#if SLANG_HAS_COMPLEX
-		case SLANG_COMPLEX_TYPE:
-		  break;
-#endif
-		default:
-		  goto type_mismatch;
-	       }
-	     break;
-#if SLANG_HAS_FLOAT
-	   case SLANG_DOUBLE_TYPE:
-	     switch (type)
-	       {
-		case SLANG_INT_TYPE:
-		  type = SLANG_DOUBLE_TYPE;
-		  break;
-# if SLANG_HAS_COMPLEX
-		case SLANG_COMPLEX_TYPE:
-		  break;
-# endif
-		default:
-		  goto type_mismatch;
-	       }
-	     break;
-#endif
-#if SLANG_HAS_COMPLEX
-	   case SLANG_COMPLEX_TYPE:
-	     switch (type)
-	       {
-		case SLANG_INT_TYPE:
-		case SLANG_DOUBLE_TYPE:
-		  type = SLANG_COMPLEX_TYPE;
-		  break;
-
-		default:
-		  goto type_mismatch;
-	       }
-	     break;
-#endif
-	   default:
-	     type_mismatch:
-	     _SLclass_type_mismatch_error (type, this_type);
-	     return -1;
-	  }
-	count--;
-     }
-
-   if (count != 0)
-     {
-	SLang_Error = SL_STACK_UNDERFLOW;
-	return -1;
-     }
-
-   count = SLang_Num_Function_Args;
-
-   if (count == 0)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "Empty inline-arrays not supported");
-	return -1;
-     }
-
-   if (type == SLANG_ARRAY_TYPE)
-     {
-	if (NULL == (at = concat_arrays (count)))
-	  return -1;
-     }
-   else
-     {
-	SLang_Object_Type index_obj;
-	int icount = (int) count;
-
-	if (NULL == (at = SLang_create_array (type, 0, NULL, &icount, 1)))
-	  return -1;
-
-	index_obj.data_type = SLANG_INT_TYPE;
-	while (count != 0)
-	  {
-	     count--;
-	     index_obj.v.int_val = (int) count;
-	     if (-1 == aput_from_indices (at, &index_obj, 1))
-	       {
-		  SLang_free_array (at);
-		  SLdo_pop_n (count);
-		  return -1;
-	       }
-	  }
-     }
-
-   return SLang_push_array (at, 1);
-}
-
-static int array_binary_op_result (int op, unsigned char a, unsigned char b,
-				   unsigned char *c)
-{
-   (void) op;
-   (void) a;
-   (void) b;
-   *c = SLANG_ARRAY_TYPE;
-   return 1;
-}
-
-static int array_binary_op (int op,
-			    unsigned char a_type, VOID_STAR ap, unsigned int na,
-			    unsigned char b_type, VOID_STAR bp, unsigned int nb,
-			    VOID_STAR cp)
-{
-   SLang_Array_Type *at, *bt, *ct;
-   unsigned int i, num_dims;
-   int (*binary_fun) (int,
-		      unsigned char, VOID_STAR, unsigned int,
-		      unsigned char, VOID_STAR, unsigned int,
-		      VOID_STAR);
-   SLang_Class_Type *a_cl, *b_cl, *c_cl;
-   int no_init;
-
-   if (a_type == SLANG_ARRAY_TYPE)
-     {
-	if (na != 1)
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, "Binary operation on multiple arrays not implemented");
-	     return -1;
-	  }
-
-	at = *(SLang_Array_Type **) ap;
-	if (-1 == coerse_array_to_linear (at))
-	  return -1;
-	ap = at->data;
-	a_type = at->data_type;
-	na = at->num_elements;
-     }
-   else
-     {
-	at = NULL;
-     }
-
-   if (b_type == SLANG_ARRAY_TYPE)
-     {
-	if (nb != 1)
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, "Binary operation on multiple arrays not implemented");
-	     return -1;
-	  }
-
-	bt = *(SLang_Array_Type **) bp;
-	if (-1 == coerse_array_to_linear (bt))
-	  return -1;
-	bp = bt->data;
-	b_type = bt->data_type;
-	nb = bt->num_elements;
-     }
-   else
-     {
-	bt = NULL;
-     }
-
-   if ((at != NULL) && (bt != NULL))
-     {
-	num_dims = at->num_dims;
-
-	if (num_dims != bt->num_dims)
-	  {
-	     SLang_verror (SL_TYPE_MISMATCH, "Arrays must have same dim for binary operation");
-	     return -1;
-	  }
-
-	for (i = 0; i < num_dims; i++)
-	  {
-	     if (at->dims[i] != bt->dims[i])
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "Arrays must be the same for binary operation");
-		  return -1;
-	       }
-	  }
-     }
-
-   a_cl = _SLclass_get_class (a_type);
-   b_cl = _SLclass_get_class (b_type);
-
-   if (NULL == (binary_fun = _SLclass_get_binary_fun (op, a_cl, b_cl, &c_cl, 1)))
-     return -1;
-
-   no_init = ((c_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-	      || (c_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
-   ct = NULL;
-#if _SLANG_USE_TMP_OPTIMIZATION
-   /* If we are dealing with scalar (or vector) objects, and if the object
-    * appears to be owned by the stack, then use it instead of creating a 
-    * new version.  This can happen with code such as:
-    * @  x = [1,2,3,4];
-    * @  x = __tmp(x) + 1;
-    */
-   if (no_init)
-     {
-	if ((at != NULL) 
-	    && (at->num_refs == 1)
-	    && (at->data_type == c_cl->cl_data_type))
-	  {
-	     ct = at;
-	     ct->num_refs = 2;
-	  }
-	else if ((bt != NULL) 
-	    && (bt->num_refs == 1)
-	    && (bt->data_type == c_cl->cl_data_type))
-	  {
-	     ct = bt;
-	     ct->num_refs = 2;
-	  }
-     }
-#endif				       /* _SLANG_USE_TMP_OPTIMIZATION */
-   
-   if (ct == NULL)
-     {
-	if (at != NULL) ct = at; else ct = bt;
-	ct = SLang_create_array1 (c_cl->cl_data_type, 0, NULL, ct->dims, ct->num_dims, no_init);
-	if (ct == NULL)
-	  return -1;
-     }
-
-
-   if ((na == 0) || (nb == 0)	       /* allow empty arrays */
-       || (1 == (*binary_fun) (op, a_type, ap, na, b_type, bp, nb, ct->data)))
-     {
-	*(SLang_Array_Type **) cp = ct;
-	return 1;
-     }
-
-   SLang_free_array (ct);
-   return -1;
-}
-
-static void array_where (void)
-{
-   SLang_Array_Type *at, *bt;
-   char *a_data;
-   int *b_data;
-   unsigned int i, num_elements;
-   int b_num;
-
-   if (-1 == SLang_pop_array (&at, 1))
-     return;
-
-   bt = NULL;
-
-   if (at->data_type != SLANG_CHAR_TYPE)
-     {
-	int zero;
-	SLang_Array_Type *tmp_at;
-
-	tmp_at = at;
-	zero = 0;
-	if (1 != array_binary_op (SLANG_NE,
-				  SLANG_ARRAY_TYPE, (VOID_STAR) &at, 1,
-				  SLANG_CHAR_TYPE, (VOID_STAR) &zero, 1,
-				  (VOID_STAR) &tmp_at))
-	    goto return_error;
-
-	SLang_free_array (at);
-	at = tmp_at;
-	if (at->data_type != SLANG_CHAR_TYPE)
-	  {
-	     SLang_Error = SL_TYPE_MISMATCH;
-	     goto return_error;
-	  }
-     }
-
-   a_data = (char *) at->data;
-   num_elements = at->num_elements;
-
-   b_num = 0;
-   for (i = 0; i < num_elements; i++)
-     if (a_data[i] != 0) b_num++;
-
-   if (NULL == (bt = SLang_create_array1 (SLANG_INT_TYPE, 0, NULL, &b_num, 1, 1)))
-     goto return_error;
-
-   b_data = (int *) bt->data;
-
-   i = 0;
-   while (b_num)
-     {
-	if (a_data[i] != 0)
-	  {
-	     *b_data++ = i;
-	     b_num--;
-	  }
-
-	i++;
-     }
-
-   (void) SLang_push_array (bt, 0);
-   /* drop */
-
-   return_error:
-   SLang_free_array (at);
-   SLang_free_array (bt);
-}
-
-static int do_array_reshape (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
-   int *dims;
-   unsigned int i, num_dims;
-   unsigned int num_elements;
-
-   if ((ind_at->data_type != SLANG_INT_TYPE)
-       || (ind_at->num_dims != 1))
-     {
-	SLang_verror (SL_TYPE_MISMATCH, "Expecting 1-d integer array");
-	return -1;
-     }
-
-   num_dims = ind_at->num_elements;
-   dims = (int *) ind_at->data;
-
-   num_elements = 1;
-   for (i = 0; i < num_dims; i++)
-     {
-	int d = dims[i];
-	if (d < 0)
-	  {
-	     SLang_verror (SL_INVALID_PARM, "reshape: dimension is less then 0");
-	     return -1;
-	  }
-
-	num_elements = (unsigned int) d * num_elements;
-     }
-
-   if ((num_elements != at->num_elements)
-       || (num_dims > SLARRAY_MAX_DIMS))
-     {
-	SLang_verror (SL_INVALID_PARM, "Unable to reshape array to specified size");
-	return -1;
-     }
-
-   for (i = 0; i < num_dims; i++)
-     at->dims [i] = dims[i];
-
-   while (i < SLARRAY_MAX_DIMS)
-     {
-	at->dims [i] = 1;
-	i++;
-     }
-
-   at->num_dims = num_dims;
-   return 0;
-}
-
-static void array_reshape (SLang_Array_Type *at, SLang_Array_Type *ind_at)
-{
-   (void) do_array_reshape (at, ind_at);
-}
-
-static void _array_reshape (SLang_Array_Type *ind_at)
-{
-   SLang_Array_Type *at;
-   SLang_Array_Type *new_at;
-
-   if (-1 == SLang_pop_array (&at, 1))
-     return;
-
-   /* FIXME: Priority=low: duplicate_array could me modified to look at num_refs */
-
-   /* Now try to avoid the overhead of creating a new array if possible */
-   if (at->num_refs == 1)
-     {
-	/* Great, we are the sole owner of this array. */
-	if ((-1 == do_array_reshape (at, ind_at))
-	    || (-1 == SLclass_push_ptr_obj (SLANG_ARRAY_TYPE, (VOID_STAR)at)))
-	  SLang_free_array (at);
-	return;
-     }
-
-   new_at = SLang_duplicate_array (at);
-   if (new_at != NULL)
-     {
-	if (0 == do_array_reshape (new_at, ind_at))
-	  (void) SLang_push_array (new_at, 0);
-	
-	SLang_free_array (new_at);
-     }
-   SLang_free_array (at);
-}
-
-typedef struct
-{
-   SLang_Array_Type *at;
-   unsigned int increment;
-   char *addr;
-}
-Map_Arg_Type;
-/* Usage: array_map (Return-Type, func, args,....); */
-static void array_map (void)
-{
-   Map_Arg_Type *args;
-   unsigned int num_args;
-   unsigned int i, i_control;
-   SLang_Name_Type *nt;
-   unsigned int num_elements;
-   SLang_Array_Type *at;
-   char *addr;
-   unsigned char type;
-
-   at = NULL;
-   args = NULL;
-   nt = NULL;
-
-   if (SLang_Num_Function_Args < 3)
-     {
-	SLang_verror (SL_INVALID_PARM,
-		      "Usage: array_map (Return-Type, &func, args...)");
-	SLdo_pop_n (SLang_Num_Function_Args);
-	return;
-     }
-
-   num_args = (unsigned int)SLang_Num_Function_Args - 2;
-   args = (Map_Arg_Type *) SLmalloc (num_args * sizeof (Map_Arg_Type));
-   if (args == NULL)
-     {
-	SLdo_pop_n (SLang_Num_Function_Args);
-	return;
-     }
-   memset ((char *) args, 0, num_args * sizeof (Map_Arg_Type));
-   i = num_args;
-   i_control = 0;
-   while (i > 0)
-     {
-	i--;
-	if (-1 == SLang_pop_array (&args[i].at, 1))
-	  {
-	     SLdo_pop_n (i + 2);
-	     goto return_error;
-	  }
-	if (args[i].at->num_elements > 1)
-	  i_control = i;
-     }
-
-   if (NULL == (nt = SLang_pop_function ()))
-     {
-	SLdo_pop_n (1);
-	goto return_error;
-     }
-
-   num_elements = args[i_control].at->num_elements;
-
-   if (-1 == _SLang_pop_datatype (&type))
-     goto return_error;
-
-   if (type == SLANG_UNDEFINED_TYPE)   /* Void_Type */
-     at = NULL;
-   else
-     {
-	at = args[i_control].at;
-
-	if (NULL == (at = SLang_create_array (type, 0, NULL, at->dims, at->num_dims)))
-	  goto return_error;
-     }
-   
-
-   for (i = 0; i < num_args; i++)
-     {
-	SLang_Array_Type *ati = args[i].at;
-	/* FIXME: Priority = low: The actual dimensions should be compared. */
-	if (ati->num_elements == num_elements)
-	  args[i].increment = ati->sizeof_type;
-	/* memset already guarantees increment to be zero */
-
-	if (ati->num_elements == 0)
-	  {
-	     SLang_verror (0, "array_map: function argument %d of %d is an empty array", 
-			   i+1, num_args);
-	     goto return_error;
-	  }
-
-	args[i].addr = (char *) ati->data;
-     }
-
-   if (at == NULL)
-     addr = NULL;
-   else
-     addr = (char *)at->data;
-
-   for (i = 0; i < num_elements; i++)
-     {
-	unsigned int j;
-
-	if (-1 == SLang_start_arg_list ())
-	  goto return_error;
-
-	for (j = 0; j < num_args; j++)
-	  {
-	     if (-1 == push_element_at_addr (args[j].at, 
-					     (VOID_STAR) args[j].addr,
-					     1))
-	       {
-		  SLdo_pop_n (j);
-		  goto return_error;
-	       }
-
-	     args[j].addr += args[j].increment;
-	  }
-
-	if (-1 == SLang_end_arg_list ())
-	  {
-	     SLdo_pop_n (num_args);
-	     goto return_error;
-	  }
-
-	if (-1 == SLexecute_function (nt))
-	  goto return_error;
-
-	if (at == NULL)
-	  continue;
-
-	if (-1 == at->cl->cl_apop (type, (VOID_STAR) addr))
-	  goto return_error;
-
-	addr += at->sizeof_type;
-     }
-
-   if (at != NULL)
-     (void) SLang_push_array (at, 0);
-
-   /* drop */
-
-   return_error:
-   SLang_free_array (at);
-   SLang_free_function (nt);
-   if (args != NULL)
-     {
-	for (i = 0; i < num_args; i++)
-	  SLang_free_array (args[i].at);
-
-	SLfree ((char *) args);
-     }
-}
-
-static SLang_Intrin_Fun_Type Array_Table [] =
-{
-   MAKE_INTRINSIC_0("array_map", array_map, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("array_sort", sort_array, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_1("array_to_bstring", array_to_bstring, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
-   MAKE_INTRINSIC_1("bstring_to_array", bstring_to_array, SLANG_VOID_TYPE, SLANG_BSTRING_TYPE),
-   MAKE_INTRINSIC("init_char_array", init_char_array, SLANG_VOID_TYPE, 0),
-   MAKE_INTRINSIC("array_info", array_info, SLANG_VOID_TYPE, 0),
-   MAKE_INTRINSIC("where", array_where, SLANG_VOID_TYPE, 0),
-   MAKE_INTRINSIC_2("reshape", array_reshape, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE, SLANG_ARRAY_TYPE),
-   MAKE_INTRINSIC_1("_reshape", _array_reshape, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-static char *array_string (unsigned char type, VOID_STAR v)
-{
-   SLang_Array_Type *at;
-   char buf[512];
-   unsigned int i, num_dims;
-   int *dims;
-
-   at = *(SLang_Array_Type **) v;
-   type = at->data_type;
-   num_dims = at->num_dims;
-   dims = at->dims;
-
-   sprintf (buf, "%s[%d", SLclass_get_datatype_name (type), at->dims[0]);
-
-   for (i = 1; i < num_dims; i++)
-     sprintf (buf + strlen(buf), ",%d", dims[i]);
-   strcat (buf, "]");
-
-   return SLmake_string (buf);
-}
-
-static void array_destroy (unsigned char type, VOID_STAR v)
-{
-   (void) type;
-   SLang_free_array (*(SLang_Array_Type **) v);
-}
-
-static int array_push (unsigned char type, VOID_STAR v)
-{
-   SLang_Array_Type *at;
-
-   (void) type;
-   at = *(SLang_Array_Type **) v;
-   return SLang_push_array (at, 0);
-}
-
-/* Intrinsic arrays are not stored in a variable. So, the address that
- * would contain the variable holds the array address.
- */
-static int array_push_intrinsic (unsigned char type, VOID_STAR v)
-{
-   (void) type;
-   return SLang_push_array ((SLang_Array_Type *) v, 0);
-}
-
-int _SLarray_add_bin_op (unsigned char type)
-{
-   SL_OOBinary_Type *ab;
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   ab = cl->cl_binary_ops;
-
-   while (ab != NULL)
-     {
-	if (ab->data_type == SLANG_ARRAY_TYPE)
-	  return 0;
-	ab = ab->next;
-     }
-
-   if ((-1 == SLclass_add_binary_op (SLANG_ARRAY_TYPE, type, array_binary_op, array_binary_op_result))
-       || (-1 == SLclass_add_binary_op (type, SLANG_ARRAY_TYPE, array_binary_op, array_binary_op_result)))
-     return -1;
-
-   return 0;
-}
-
-static SLang_Array_Type *
-do_array_math_op (int op, int unary_type,
-		  SLang_Array_Type *at, unsigned int na)
-{
-   unsigned char a_type, b_type;
-   int (*f) (int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-   SLang_Array_Type *bt;
-   SLang_Class_Type *b_cl;
-   int no_init;
-
-   if (na != 1)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "Operation restricted to 1 array");
-	return NULL;
-     }
-
-   a_type = at->data_type;
-   if (NULL == (f = _SLclass_get_unary_fun (op, at->cl, &b_cl, unary_type)))
-     return NULL;
-   b_type = b_cl->cl_data_type;
-
-   if (-1 == coerse_array_to_linear (at))
-     return NULL;
-
-   no_init = ((b_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-	      || (b_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
-#if _SLANG_USE_TMP_OPTIMIZATION
-   /* If we are dealing with scalar (or vector) objects, and if the object
-    * appears to be owned by the stack, then use it instead of creating a 
-    * new version.  This can happen with code such as:
-    * @  x = [1,2,3,4];
-    * @  x = UNARY_OP(__tmp(x));
-    */
-   if (no_init
-       && (at->num_refs == 1)
-       && (at->data_type == b_cl->cl_data_type))
-     {
-	bt = at;
-	bt->num_refs = 2;
-     }
-   else
-#endif				       /* _SLANG_USE_TMP_OPTIMIZATION */
-     if (NULL == (bt = SLang_create_array1 (b_type, 0, NULL, at->dims, at->num_dims, no_init)))
-       return NULL;
-
-   if (1 != (*f)(op, a_type, at->data, at->num_elements, bt->data))
-     {
-	SLang_free_array (bt);
-	return NULL;
-     }
-   return bt;
-}
-
-static int
-array_unary_op_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) op;
-   (void) a;
-   *b = SLANG_ARRAY_TYPE;
-   return 1;
-}
-
-static int
-array_unary_op (int op,
-		unsigned char a, VOID_STAR ap, unsigned int na,
-		VOID_STAR bp)
-{
-   SLang_Array_Type *at;
-
-   (void) a;
-   at = *(SLang_Array_Type **) ap;
-   if (NULL == (at = do_array_math_op (op, _SLANG_BC_UNARY, at, na)))
-     {
-	if (SLang_Error) return -1;
-	return 0;
-     }
-   *(SLang_Array_Type **) bp = at;
-   return 1;
-}
-
-static int
-array_math_op (int op,
-	       unsigned char a, VOID_STAR ap, unsigned int na,
-	       VOID_STAR bp)
-{
-   SLang_Array_Type *at;
-
-   (void) a;
-   at = *(SLang_Array_Type **) ap;
-   if (NULL == (at = do_array_math_op (op, _SLANG_BC_MATH_UNARY, at, na)))
-     {
-	if (SLang_Error) return -1;
-	return 0;
-     }
-   *(SLang_Array_Type **) bp = at;
-   return 1;
-}
-
-static int
-array_app_op (int op,
-	      unsigned char a, VOID_STAR ap, unsigned int na,
-	      VOID_STAR bp)
-{
-   SLang_Array_Type *at;
-
-   (void) a;
-   at = *(SLang_Array_Type **) ap;
-   if (NULL == (at = do_array_math_op (op, _SLANG_BC_APP_UNARY, at, na)))
-     {
-	if (SLang_Error) return -1;
-	return 0;
-     }
-   *(SLang_Array_Type **) bp = at;
-   return 1;
-}
-
-int
-_SLarray_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
-		   unsigned char b_type, VOID_STAR bp,
-		   int is_implicit)
-{
-   SLang_Array_Type *at, *bt;
-   SLang_Class_Type *b_cl;
-   int no_init;
-   int (*t) (unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR);
-
-   if (na != 1)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED, "typecast of multiple arrays not implemented");
-	return -1;
-     }
-
-   at = *(SLang_Array_Type **) ap;
-   a_type = at->data_type;
-
-   if (a_type == b_type)
-     {
-	at->num_refs += 1;
-	*(SLang_Array_Type **) bp = at;
-	return 1;
-     }
-
-   if (NULL == (t = _SLclass_get_typecast (a_type, b_type, is_implicit)))
-     return -1;
-
-   if (-1 == coerse_array_to_linear (at))
-     return -1;
-
-   b_cl = _SLclass_get_class (b_type);
-
-   no_init = ((b_cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-	      || (b_cl->cl_class_type == SLANG_CLASS_TYPE_VECTOR));
-
-   if (NULL == (bt = SLang_create_array1 (b_type, 0, NULL, at->dims, at->num_dims, no_init)))
-     return -1;
-
-   if (1 == (*t) (a_type, at->data, at->num_elements, b_type, bt->data))
-     {
-	*(SLang_Array_Type **) bp = bt;
-	return 1;
-     }
-
-   SLang_free_array (bt);
-   return 0;
-}
-
-SLang_Array_Type *SLang_duplicate_array (SLang_Array_Type *at)
-{
-   SLang_Array_Type *bt;
-   char *data, *a_data;
-   unsigned int i, num_elements, sizeof_type;
-   unsigned int size;
-   int (*cl_acopy) (unsigned char, VOID_STAR, VOID_STAR);
-   unsigned char type;
-
-   if (-1 == coerse_array_to_linear (at))
-     return NULL;
-
-   type = at->data_type;
-   num_elements = at->num_elements;
-   sizeof_type = at->sizeof_type;
-   size = num_elements * sizeof_type;
-
-   if (NULL == (data = SLmalloc (size)))
-     return NULL;
-
-   if (NULL == (bt = SLang_create_array (type, 0, (VOID_STAR)data, at->dims, at->num_dims)))
-     {
-	SLfree (data);
-	return NULL;
-     }
-
-   a_data = (char *) at->data;
-   if (0 == (at->flags & SLARR_DATA_VALUE_IS_POINTER))
-     {
-	SLMEMCPY (data, a_data, size);
-	return bt;
-     }
-
-   SLMEMSET (data, 0, size);
-
-   cl_acopy = at->cl->cl_acopy;
-   for (i = 0; i < num_elements; i++)
-     {
-	if (NULL != *(VOID_STAR *) a_data)
-	  {
-	     if (-1 == (*cl_acopy) (type, (VOID_STAR) a_data, (VOID_STAR) data))
-	       {
-		  SLang_free_array (bt);
-		  return NULL;
-	       }
-	  }
-
-	data += sizeof_type;
-	a_data += sizeof_type;
-     }
-
-   return bt;
-}
-
-static int array_dereference (unsigned char type, VOID_STAR addr)
-{
-   SLang_Array_Type *at;
-
-   (void) type;
-   at = SLang_duplicate_array (*(SLang_Array_Type **) addr);
-   if (at == NULL) return -1;
-   return SLang_push_array (at, 1);
-}
-
-/* This function gets called via, e.g., @Array_Type (Double_Type, [10,20]);
- */
-static int
-array_datatype_deref (unsigned char type)
-{
-   SLang_Array_Type *ind_at;
-   SLang_Array_Type *at;
-
-#if 0
-   /* The parser generated code for this as if a function call were to be
-    * made.  However, the interpreter simply called the deref object routine
-    * instead of the function call.  So, I must simulate the function call.
-    * This needs to be formalized to hide this detail from applications
-    * who wish to do the same.  So...
-    * FIXME: Priority=medium
-    */
-   if (0 == _SL_increment_frame_pointer ())
-     (void) _SL_decrement_frame_pointer ();
-#endif
-
-   if (-1 == SLang_pop_array (&ind_at, 1))
-     return -1;
-
-   if ((ind_at->data_type != SLANG_INT_TYPE)
-       || (ind_at->num_dims != 1))
-     {
-	SLang_verror (SL_TYPE_MISMATCH, "Expecting 1-d integer array");
-	goto return_error;
-     }
-
-   if (-1 == _SLang_pop_datatype (&type))
-     goto return_error;
-
-   if (NULL == (at = SLang_create_array (type, 0, NULL,
-					 (int *) ind_at->data,
-					 ind_at->num_elements)))
-     goto return_error;
-
-   SLang_free_array (ind_at);
-   return SLang_push_array (at, 1);
-
-   return_error:
-   SLang_free_array (ind_at);
-   return -1;
-}
-
-static int array_length (unsigned char type, VOID_STAR v, unsigned int *len)
-{
-   SLang_Array_Type *at;
-
-   (void) type;
-   at = *(SLang_Array_Type **) v;
-   *len = at->num_elements;
-   return 0;
-}
-
-int
-_SLarray_init_slarray (void)
-{
-   SLang_Class_Type *cl;
-
-   if (-1 == SLadd_intrin_fun_table (Array_Table, NULL))
-     return -1;
-
-   if (NULL == (cl = SLclass_allocate_class ("Array_Type")))
-     return -1;
-
-   (void) SLclass_set_string_function (cl, array_string);
-   (void) SLclass_set_destroy_function (cl, array_destroy);
-   (void) SLclass_set_push_function (cl, array_push);
-   cl->cl_push_intrinsic = array_push_intrinsic;
-   cl->cl_dereference = array_dereference;
-   cl->cl_datatype_deref = array_datatype_deref;
-   cl->cl_length = array_length;
-
-   if (-1 == SLclass_register_class (cl, SLANG_ARRAY_TYPE, sizeof (VOID_STAR),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   if ((-1 == SLclass_add_binary_op (SLANG_ARRAY_TYPE, SLANG_ARRAY_TYPE, array_binary_op, array_binary_op_result))
-       || (-1 == SLclass_add_unary_op (SLANG_ARRAY_TYPE, array_unary_op, array_unary_op_result))
-       || (-1 == SLclass_add_app_unary_op (SLANG_ARRAY_TYPE, array_app_op, array_unary_op_result))
-       || (-1 == SLclass_add_math_op (SLANG_ARRAY_TYPE, array_math_op, array_unary_op_result))
-       || (-1 == SLclass_add_math_op (SLANG_ARRAY_TYPE, array_math_op, array_unary_op_result)))
-     return -1;
-
-   return 0;
-}
-
-int SLang_pop_array (SLang_Array_Type **at_ptr, int convert_scalar)
-{
-   if (-1 == pop_array (at_ptr, convert_scalar))
-     return -1;
-
-   if (-1 == coerse_array_to_linear (*at_ptr))
-     {
-	SLang_free_array (*at_ptr);
-	return -1;
-     }
-   return 0;
-}
-
-int SLang_pop_array_of_type (SLang_Array_Type **at, unsigned char type)
-{
-   if (-1 == SLclass_typecast (type, 1, 1))
-     return -1;
-
-   return SLang_pop_array (at, 1);
-}
-
-void (*_SLang_Matrix_Multiply)(void);
-
-int _SLarray_matrix_multiply (void)
-{
-   if (_SLang_Matrix_Multiply != NULL)
-     {
-	(*_SLang_Matrix_Multiply)();
-	return 0;
-     }
-   SLang_verror (SL_NOT_IMPLEMENTED, "Matrix multiplication not available");
-   return -1;
-}
-
-struct _SLang_Foreach_Context_Type
-{
-   SLang_Array_Type *at;
-   unsigned int next_element_index;
-};
-
-SLang_Foreach_Context_Type *
-_SLarray_cl_foreach_open (unsigned char type, unsigned int num)
-{
-   SLang_Foreach_Context_Type *c;
-
-   if (num != 0)
-     {
-	SLdo_pop_n (num + 1);
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "%s does not support 'foreach using' form",
-		      SLclass_get_datatype_name (type));
-	return NULL;
-     }
-
-   if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
-     return NULL;
-
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
-   if (-1 == pop_array (&c->at, 1))
-     {
-	SLfree ((char *) c);
-	return NULL;
-     }
-
-   return c;
-}
-
-void _SLarray_cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-   SLang_free_array (c->at);
-   SLfree ((char *) c);
-}
-
-int _SLarray_cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   SLang_Array_Type *at;
-   VOID_STAR data;
-
-   (void) type;
-
-   if (c == NULL)
-     return -1;
-
-   at = c->at;
-   if (at->num_elements == c->next_element_index)
-     return 0;
-
-   /* FIXME: Priority = low.  The following assumes linear arrays
-    * or Integer range arrays.  Fixing it right requires a method to get the
-    * nth element of a multidimensional array.
-    */
-
-   if (at->flags & SLARR_DATA_VALUE_IS_RANGE)
-     {
-	int d = (int) c->next_element_index;
-	data = range_get_data_addr (at, &d);
-     }
-   else
-     data = (VOID_STAR) ((char *)at->data + (c->next_element_index * at->sizeof_type));
-
-   c->next_element_index += 1;
-
-   if ((at->flags & SLARR_DATA_VALUE_IS_POINTER)
-       && (*(VOID_STAR *) data == NULL))
-     {
-	if (-1 == SLang_push_null ())
-	  return -1;
-     }
-   else if (-1 == (*at->cl->cl_apush)(at->data_type, data))
-     return -1;
-
-   /* keep going */
-   return 1;
-}
-
diff --git a/mdk-stage1/slang/slarrfun.c b/mdk-stage1/slang/slarrfun.c
deleted file mode 100644
index bfa6ec5e5..000000000
--- a/mdk-stage1/slang/slarrfun.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/* Advanced array manipulation routines for S-Lang */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static int next_transposed_index (int *dims, int *max_dims, unsigned int num_dims)
-{
-   int i;
-
-   for (i = 0; i < (int) num_dims; i++)
-     {
-	int dims_i;
-
-	dims_i = dims [i] + 1;
-	if (dims_i != (int) max_dims [i])
-	  {
-	     dims [i] = dims_i;
-	     return 0;
-	  }
-	dims [i] = 0;
-     }
-
-   return -1;
-}
-
-static SLang_Array_Type *allocate_transposed_array (SLang_Array_Type *at)
-{
-   unsigned int num_elements;
-   SLang_Array_Type *bt;
-   VOID_STAR b_data;
-
-   num_elements = at->num_elements;
-   b_data = (VOID_STAR) SLmalloc (at->sizeof_type * num_elements);
-   if (b_data == NULL)
-     return NULL;
-
-   bt = SLang_create_array (at->data_type, 0, b_data, at->dims, 2);
-   if (bt == NULL)
-     {
-	SLfree ((char *)b_data);
-	return NULL;
-     }
-
-   bt->dims[1] = at->dims[0];
-   bt->dims[0] = at->dims[1];
-
-   return bt;
-}
-
-#define GENERIC_TYPE float
-#define TRANSPOSE_2D_ARRAY transpose_floats
-#define GENERIC_TYPE_A float
-#define GENERIC_TYPE_B float
-#define GENERIC_TYPE_C float
-#define INNERPROD_FUNCTION innerprod_float_float
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_A innerprod_complex_float
-# define INNERPROD_A_COMPLEX innerprod_float_complex
-#endif
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE double
-#define TRANSPOSE_2D_ARRAY transpose_doubles
-#define GENERIC_TYPE_A double
-#define GENERIC_TYPE_B double
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_double_double
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_A innerprod_complex_double
-# define INNERPROD_A_COMPLEX innerprod_double_complex
-#endif
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE_A double
-#define GENERIC_TYPE_B float
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_double_float
-#include "slarrfun.inc"
-
-#define GENERIC_TYPE_A float
-#define GENERIC_TYPE_B double
-#define GENERIC_TYPE_C double
-#define INNERPROD_FUNCTION innerprod_float_double
-#include "slarrfun.inc"
-
-/* Finally pick up the complex_complex multiplication
- * and do the integers
- */
-#if SLANG_HAS_COMPLEX
-# define INNERPROD_COMPLEX_COMPLEX innerprod_complex_complex
-#endif
-#define GENERIC_TYPE int
-#define TRANSPOSE_2D_ARRAY transpose_ints
-#include "slarrfun.inc"
-
-#if SIZEOF_LONG != SIZEOF_INT
-# define GENERIC_TYPE long
-# define TRANSPOSE_2D_ARRAY transpose_longs
-# include "slarrfun.inc"
-#else
-# define transpose_longs transpose_ints
-#endif
-
-#if SIZEOF_SHORT != SIZEOF_INT
-# define GENERIC_TYPE short
-# define TRANSPOSE_2D_ARRAY transpose_shorts
-# include "slarrfun.inc"
-#else
-# define transpose_shorts transpose_ints
-#endif
-
-#define GENERIC_TYPE char
-#define TRANSPOSE_2D_ARRAY transpose_chars
-#include "slarrfun.inc"
-
-/* This routine works only with linear arrays */
-static SLang_Array_Type *transpose (SLang_Array_Type *at)
-{
-   int dims [SLARRAY_MAX_DIMS];
-   int *max_dims;
-   unsigned int num_dims;
-   SLang_Array_Type *bt;
-   int i;
-   unsigned int sizeof_type;
-   int is_ptr;
-   char *b_data;
-
-   max_dims = at->dims;
-   num_dims = at->num_dims;
-
-   if ((at->num_elements == 0)
-       || (num_dims == 1))
-     {
-	bt = SLang_duplicate_array (at);
-	if (num_dims == 1) bt->num_dims = 2;
-	goto transpose_dims;
-     }
-
-   /* For numeric arrays skip the overhead below */
-   if (num_dims == 2)
-     {
-	bt = allocate_transposed_array (at);
-	if (bt == NULL) return NULL;
-
-	switch (at->data_type)
-	  {
-	   case SLANG_INT_TYPE:
-	   case SLANG_UINT_TYPE:
-	     return transpose_ints (at, bt);
-	   case SLANG_DOUBLE_TYPE:
-	    return transpose_doubles (at, bt);
-	   case SLANG_FLOAT_TYPE:
-	     return transpose_floats (at, bt);
-	   case SLANG_CHAR_TYPE:
-	   case SLANG_UCHAR_TYPE:
-	     return transpose_chars (at, bt);
-	   case SLANG_LONG_TYPE:
-	   case SLANG_ULONG_TYPE:
-	     return transpose_longs (at, bt);
-	   case SLANG_SHORT_TYPE:
-	   case SLANG_USHORT_TYPE:
-	     return transpose_shorts (at, bt);
-	  }
-     }
-   else
-     {
-	bt = SLang_create_array (at->data_type, 0, NULL, max_dims, num_dims);
-	if (bt == NULL) return NULL;
-     }
-
-   sizeof_type = at->sizeof_type;
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-
-   memset ((char *)dims, 0, sizeof(dims));
-
-   b_data = (char *) bt->data;
-
-   do
-     {
-	if (-1 == _SLarray_aget_transfer_elem (at, dims, (VOID_STAR) b_data,
-					       sizeof_type, is_ptr))
-	  {
-	     SLang_free_array (bt);
-	     return NULL;
-	  }
-	b_data += sizeof_type;
-     }
-   while (0 == next_transposed_index (dims, max_dims, num_dims));
-
-   transpose_dims:
-
-   num_dims = bt->num_dims;
-   for (i = 0; i < (int) num_dims; i++)
-     bt->dims[i] = max_dims [num_dims - i - 1];
-
-   return bt;
-}
-
-static void array_transpose (SLang_Array_Type *at)
-{
-   if (NULL != (at = transpose (at)))
-     (void) SLang_push_array (at, 1);
-}
-
-static int get_inner_product_parms (SLang_Array_Type *a, int *dp,
-				    unsigned int *loops, unsigned int *other)
-{
-   int num_dims;
-   int d;
-   
-   d = *dp;
-   
-   num_dims = (int)a->num_dims;
-   if (num_dims == 0) 
-     {
-	SLang_verror (SL_INVALID_PARM, "Inner-product operation requires an array of at least 1 dimension.");
-	return -1;
-     }
-
-   /* An index of -1 refers to last dimension */
-   if (d == -1)
-     d += num_dims;
-   *dp = d;
-
-   if (a->num_elements == 0)
-     {				       /* [] # [] ==> [] */
-	*loops = *other = 0;
-	return 0;
-     }
-
-   *loops = a->num_elements / a->dims[d];
-
-   if (d == 0)
-     {
-	*other = *loops;  /* a->num_elements / a->dims[0]; */
-	return 0;
-     }
-   
-   *other = a->dims[d];
-   return 0;
-}
-
-/* This routines takes two arrays A_i..j and B_j..k and produces a third
- * via C_i..k = A_i..j B_j..k.
- * 
- * If A is a vector, and B is a 2-d matrix, then regard A as a 2-d matrix
- * with 1-column.
- */
-static void do_inner_product (void)
-{
-   SLang_Array_Type *a, *b, *c;
-   void (*fun)(SLang_Array_Type *, SLang_Array_Type *, SLang_Array_Type *,
-	       unsigned int, unsigned int, unsigned int, unsigned int, 
-	       unsigned int);
-   unsigned char c_type;
-   int dims[SLARRAY_MAX_DIMS];
-   int status;
-   unsigned int a_loops, b_loops, b_inc, a_stride;
-   int ai_dims, i, j;
-   unsigned int num_dims, a_num_dims, b_num_dims;
-   int ai, bi;
-
-   /* The result of a inner_product will be either a float, double, or
-    * a complex number.
-    * 
-    * If an integer array is used, it will be promoted to a float.
-    */
-   
-   switch (SLang_peek_at_stack1 ())
-     {
-      case SLANG_DOUBLE_TYPE:
-	if (-1 == SLang_pop_array_of_type (&b, SLANG_DOUBLE_TYPE))
-	  return;
-	break;
-
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	if (-1 == SLang_pop_array_of_type (&b, SLANG_COMPLEX_TYPE))
-	  return;
-	break;
-#endif
-      case SLANG_FLOAT_TYPE:
-      default:
-	if (-1 == SLang_pop_array_of_type (&b, SLANG_FLOAT_TYPE))
-	  return;
-	break;
-     }
-
-   switch (SLang_peek_at_stack1 ())
-     {
-      case SLANG_DOUBLE_TYPE:
-	status = SLang_pop_array_of_type (&a, SLANG_DOUBLE_TYPE);
-	break;
-
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	status = SLang_pop_array_of_type (&a, SLANG_COMPLEX_TYPE);
-	break;
-#endif
-      case SLANG_FLOAT_TYPE:
-      default:
-	status = SLang_pop_array_of_type (&a, SLANG_FLOAT_TYPE);
-	break;
-     }
-   
-   if (status == -1)
-     {
-	SLang_free_array (b);
-	return;
-     }
-   
-   ai = -1;			       /* last index of a */
-   bi = 0;			       /* first index of b */
-   if ((-1 == get_inner_product_parms (a, &ai, &a_loops, &a_stride))
-       || (-1 == get_inner_product_parms (b, &bi, &b_loops, &b_inc)))
-     {
-	SLang_verror (SL_TYPE_MISMATCH, "Array dimensions are not compatible for inner-product");
-	goto free_and_return;
-     }
-       
-   a_num_dims = a->num_dims;
-   b_num_dims = b->num_dims;
-
-   /* Coerse a 1-d vector to 2-d */
-   if ((a_num_dims == 1) 
-       && (b_num_dims == 2)
-       && (a->num_elements))
-     {
-	a_num_dims = 2;
-	ai = 1;
-	a_loops = a->num_elements;
-	a_stride = 1;
-     }
-
-   if ((ai_dims = a->dims[ai]) != b->dims[bi])
-     {
-	SLang_verror (SL_TYPE_MISMATCH, "Array dimensions are not compatible for inner-product");
-	goto free_and_return;
-     }
-
-   num_dims = a_num_dims + b_num_dims - 2;
-   if (num_dims > SLARRAY_MAX_DIMS)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Inner-product result exceed max allowed dimensions");
-	goto free_and_return;
-     }
-
-   if (num_dims)
-     {
-	j = 0;
-	for (i = 0; i < (int)a_num_dims; i++)
-	  if (i != ai) dims [j++] = a->dims[i];
-	for (i = 0; i < (int)b_num_dims; i++)
-	  if (i != bi) dims [j++] = b->dims[i];
-     }
-   else
-     {
-	/* a scalar */
-	num_dims = 1;
-	dims[0] = 1;
-     }
-
-   c_type = 0; fun = NULL;
-   switch (a->data_type)
-     {
-      case SLANG_FLOAT_TYPE:
-	switch (b->data_type)
-	  {
-	   case SLANG_FLOAT_TYPE:
-	     c_type = SLANG_FLOAT_TYPE;
-	     fun = innerprod_float_float;
-	     break;
-	   case SLANG_DOUBLE_TYPE:
-	     c_type = SLANG_DOUBLE_TYPE;
-	     fun = innerprod_float_double;
-	     break;
-#if SLANG_HAS_COMPLEX
-	   case SLANG_COMPLEX_TYPE:
-	     c_type = SLANG_COMPLEX_TYPE;
-	     fun = innerprod_float_complex;
-	     break;
-#endif
-	  }
-	break;
-      case SLANG_DOUBLE_TYPE:
-	switch (b->data_type)
-	  {
-	   case SLANG_FLOAT_TYPE:
-	     c_type = SLANG_DOUBLE_TYPE;
-	     fun = innerprod_double_float;
-	     break;
-	   case SLANG_DOUBLE_TYPE:
-	     c_type = SLANG_DOUBLE_TYPE;
-	     fun = innerprod_double_double;
-	     break;
-#if SLANG_HAS_COMPLEX
-	   case SLANG_COMPLEX_TYPE:
-	     c_type = SLANG_COMPLEX_TYPE;
-	     fun = innerprod_double_complex;
-	     break;
-#endif
-	  }
-	break;
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	c_type = SLANG_COMPLEX_TYPE;
-	switch (b->data_type)
-	  {
-	   case SLANG_FLOAT_TYPE:
-	     fun = innerprod_complex_float;
-	     break;
-	   case SLANG_DOUBLE_TYPE:
-	     fun = innerprod_complex_double;
-	     break;
-	   case SLANG_COMPLEX_TYPE:
-	     fun = innerprod_complex_complex;
-	     break;
-	  }
-	break;
-#endif
-      default:
-	break;
-     }
-
-   if (NULL == (c = SLang_create_array (c_type, 0, NULL, dims, num_dims)))
-     goto free_and_return;
-
-   (*fun)(a, b, c, a_loops, a_stride, b_loops, b_inc, ai_dims);
-
-   (void) SLang_push_array (c, 1);
-   /* drop */
-
-   free_and_return:
-   SLang_free_array (a);
-   SLang_free_array (b);
-}
-
-
-
-static SLang_Intrin_Fun_Type Array_Fun_Table [] =
-{
-   MAKE_INTRINSIC_1("transpose", array_transpose, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_array (void)
-{
-   if (-1 == SLadd_intrin_fun_table (Array_Fun_Table, "__SLARRAY__"))
-     return -1;
-#if SLANG_HAS_FLOAT
-   _SLang_Matrix_Multiply = do_inner_product;
-#endif
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slarrfun.inc b/mdk-stage1/slang/slarrfun.inc
deleted file mode 100644
index 348473a6f..000000000
--- a/mdk-stage1/slang/slarrfun.inc
+++ /dev/null
@@ -1,257 +0,0 @@
-/* -*- mode: C -*- */
-
-/* Some "inline" functions for generic scalar types */
-
-#ifdef TRANSPOSE_2D_ARRAY
-static SLang_Array_Type *TRANSPOSE_2D_ARRAY (SLang_Array_Type *at, SLang_Array_Type *bt)
-{
-   GENERIC_TYPE *a_data, *b_data;
-   int nr, nc, i;
-
-   nr = at->dims[0];
-   nc = at->dims[1];
-
-   a_data = (GENERIC_TYPE *) at->data;
-   b_data = (GENERIC_TYPE *) bt->data;
-
-   for (i = 0; i < nr; i++)
-     {
-	GENERIC_TYPE *offset = b_data + i;
-	int j;
-	for (j = 0; j < nc; j++)
-	  {
-	     *offset = *a_data++;
-	     offset += nr;
-	  }
-     }
-   return bt;
-}
-#undef TRANSPOSE_2D_ARRAY
-#endif
-
-
-#ifdef INNERPROD_FUNCTION
-
-static void INNERPROD_FUNCTION
-  (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
-   unsigned int a_loops, unsigned int a_stride,
-   unsigned int b_loops, unsigned int b_inc,
-   unsigned int inner_loops)
-{
-   GENERIC_TYPE_A *a;
-   GENERIC_TYPE_B *b;
-   GENERIC_TYPE_C *c;
-
-   c = (GENERIC_TYPE_C *) ct->data;
-   b = (GENERIC_TYPE_B *) bt->data;
-   a = (GENERIC_TYPE_A *) at->data;
-   
-   while (a_loops--)
-     {
-	GENERIC_TYPE_B *bb;
-	unsigned int j;
-
-	bb = b;
-
-	for (j = 0; j < inner_loops; j++)
-	  {
-	     double x = (double) a[j];
-
-	     if (x != 0.0)
-	       {
-		  unsigned int k;
-
-		  for (k = 0; k < b_loops; k++)
-		    c[k] += x * bb[k];
-	       }
-	     bb += b_inc;
-	  }
-	c += b_loops;
-	a += a_stride;
-     }
-}
-#undef INNERPROD_FUNCTION
-
-#undef GENERIC_TYPE_A
-#undef GENERIC_TYPE_B
-#undef GENERIC_TYPE_C
-#endif
-
-#ifdef INNERPROD_COMPLEX_A
-static void INNERPROD_COMPLEX_A
-  (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
-   unsigned int a_loops, unsigned int a_stride,
-   unsigned int b_loops, unsigned int b_inc,
-   unsigned int inner_loops)
-{
-   double *a;
-   GENERIC_TYPE *b;
-   double *c;
-
-   c = (double *) ct->data;
-   b = (GENERIC_TYPE *) bt->data;
-   a = (double *) at->data;
-   
-   a_stride *= 2;
-
-   while (a_loops--)
-     {
-	GENERIC_TYPE *bb;
-	unsigned int bb_loops;
-
-	bb = b;
-	bb_loops = b_loops;
-	
-	while (bb_loops--)
-	  {
-	     double real_sum;
-	     double imag_sum;
-	     unsigned int iloops;
-	     double *aa;
-	     GENERIC_TYPE *bbb;
-	     
-	     aa = a;
-	     bbb = bb;
-	     iloops = inner_loops;
-
-	     real_sum = 0.0;
-	     imag_sum = 0.0;
-	     while (iloops--)
-	       {
-		  real_sum += aa[0] * (double)bbb[0];
-		  imag_sum += aa[1] * (double)bbb[0];
-		  aa += 2;
-		  bbb += b_inc;
-	       }
-
-	     *c++ = real_sum;
-	     *c++ = imag_sum;
-	     bb++;
-	  }
-
-	a += a_stride;
-     }
-}
-
-static void INNERPROD_A_COMPLEX
-  (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
-   unsigned int a_loops, unsigned int a_stride,
-   unsigned int b_loops, unsigned int b_inc,
-   unsigned int inner_loops)
-{
-   GENERIC_TYPE *a;
-   double *b;
-   double *c;
-
-   c = (double *) ct->data;
-   b = (double *) bt->data;
-   a = (GENERIC_TYPE *) at->data;
-   
-   b_inc *= 2;
-
-   while (a_loops--)
-     {
-	double *bb;
-	unsigned int bb_loops;
-
-	bb = b;
-	bb_loops = b_loops;
-	
-	while (bb_loops--)
-	  {
-	     double real_sum;
-	     double imag_sum;
-	     unsigned int iloops;
-	     GENERIC_TYPE *aa;
-	     double *bbb;
-
-	     aa = a;
-	     bbb = bb;
-	     iloops = inner_loops;
-
-	     real_sum = 0.0;
-	     imag_sum = 0.0;
-	     while (iloops--)
-	       {
-		  real_sum += (double)aa[0] * bbb[0];
-		  imag_sum += (double)aa[0] * bbb[1];
-		  aa += 1;
-		  bbb += b_inc;
-	       }
-
-	     *c++ = real_sum;
-	     *c++ = imag_sum;
-	     bb += 2;
-	  }
-
-	a += a_stride;
-     }
-}
-
-#undef INNERPROD_A_COMPLEX
-#undef INNERPROD_COMPLEX_A
-#endif				       /* INNERPROD_COMPLEX_A */
-
-
-#ifdef INNERPROD_COMPLEX_COMPLEX
-static void INNERPROD_COMPLEX_COMPLEX
-  (SLang_Array_Type *at, SLang_Array_Type *bt, SLang_Array_Type *ct,
-   unsigned int a_loops, unsigned int a_stride,
-   unsigned int b_loops, unsigned int b_inc,
-   unsigned int inner_loops)
-{
-   double *a;
-   double *b;
-   double *c;
-
-   c = (double *) ct->data;
-   b = (double *) bt->data;
-   a = (double *) at->data;
-   
-   a_stride *= 2;
-   b_inc *= 2;
-
-   while (a_loops--)
-     {
-	double *bb;
-	unsigned int bb_loops;
-
-	bb = b;
-	bb_loops = b_loops;
-	
-	while (bb_loops--)
-	  {
-	     double real_sum;
-	     double imag_sum;
-	     unsigned int iloops;
-	     double *aa;
-	     double *bbb;
-
-	     aa = a;
-	     bbb = bb;
-	     iloops = inner_loops;
-
-	     real_sum = 0.0;
-	     imag_sum = 0.0;
-	     while (iloops--)
-	       {
-		  real_sum += aa[0]*bbb[0] - aa[1]*bbb[1];
-		  imag_sum += aa[0]*bbb[1] + aa[1]*bbb[0];
-		  aa += 2;
-		  bbb += b_inc;
-	       }
-
-	     *c++ = real_sum;
-	     *c++ = imag_sum;
-	     bb += 2;
-	  }
-
-	a += a_stride;
-     }
-}
-#undef INNERPROD_COMPLEX_COMPLEX
-#endif
-
-#ifdef GENERIC_TYPE
-# undef GENERIC_TYPE
-#endif
diff --git a/mdk-stage1/slang/slarrmis.c b/mdk-stage1/slang/slarrmis.c
deleted file mode 100644
index 330dcb53f..000000000
--- a/mdk-stage1/slang/slarrmis.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* Misc Array Functions */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_get_array_element (SLang_Array_Type *at, int *indices, VOID_STAR data)
-{
-   int is_ptr;
-
-   if ((at == NULL)
-       || (indices == NULL)
-       || (data == NULL))
-     return -1;
-
-   is_ptr = (at->flags & SLARR_DATA_VALUE_IS_POINTER);
-   if (is_ptr) *(VOID_STAR *) data = NULL;
-   return _SLarray_aget_transfer_elem (at, indices, data, at->sizeof_type, is_ptr);
-}
-
-int SLang_set_array_element (SLang_Array_Type *at, int *indices, VOID_STAR data)
-{
-   if ((at == NULL)
-       || (indices == NULL)
-       || (data == NULL))
-     return -1;
-   
-   return _SLarray_aput_transfer_elem (at, indices, data, at->sizeof_type,
-				       at->flags & SLARR_DATA_VALUE_IS_POINTER);
-}
-
diff --git a/mdk-stage1/slang/slassoc.c b/mdk-stage1/slang/slassoc.c
deleted file mode 100644
index 5997458d2..000000000
--- a/mdk-stage1/slang/slassoc.c
+++ /dev/null
@@ -1,713 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-#define USE_NEW_ANYTYPE_CODE 1
-
-typedef struct _SLAssoc_Array_Element_Type
-{
-   char *key;		       /* slstring */
-   struct _SLAssoc_Array_Element_Type *next;
-   SLang_Object_Type value;
-}
-_SLAssoc_Array_Element_Type;
-
-typedef struct
-{
-   _SLAssoc_Array_Element_Type *elements[SLASSOC_HASH_TABLE_SIZE];
-   SLang_Object_Type default_value;
-   unsigned int num_elements;
-#define HAS_DEFAULT_VALUE	1
-   unsigned int flags;
-   unsigned char type;
-}
-SLang_Assoc_Array_Type;
-
-#define USE_CACHED_STRING	1
-
-#if USE_CACHED_STRING 
-static char *Cached_String;
-static SLang_Object_Type *Cached_Obj;
-static SLang_Assoc_Array_Type *Cached_Array;
-#endif
-
-static SLang_Assoc_Array_Type *alloc_assoc_array (unsigned char type, int has_default_value)
-{
-   SLang_Assoc_Array_Type *a;
-
-   a = (SLang_Assoc_Array_Type *)SLmalloc (sizeof (SLang_Assoc_Array_Type));
-   if (a == NULL)
-     {
-	if (has_default_value)
-	  SLdo_pop_n (1);
-	return NULL;
-     }
-
-   memset ((char *) a, 0, sizeof (SLang_Assoc_Array_Type));
-   a->type = type;
-
-   if (has_default_value)
-     {
-	if (
-#if USE_NEW_ANYTYPE_CODE
-	    ((type != SLANG_ANY_TYPE) && (-1 == SLclass_typecast (type, 1, 1)))
-#else
-	    (-1 == SLclass_typecast (type, 1, 1))
-#endif
-	    || (-1 == SLang_pop (&a->default_value)))
-	  {
-	     SLfree ((char *) a);
-	     return NULL;
-	  }
-
-	a->flags |= HAS_DEFAULT_VALUE;
-     }
-   return a;
-}
-
-static void free_element (_SLAssoc_Array_Element_Type *e)
-{
-   if (e == NULL)
-     return;
-
-   SLang_free_object (&e->value);
-   SLang_free_slstring (e->key);
-#if USE_CACHED_STRING
-   if (e->key == Cached_String)
-     Cached_String = NULL;
-#endif
-   SLfree ((char *)e);
-}
-
-static void delete_assoc_array (SLang_Assoc_Array_Type *a)
-{
-   unsigned int i;
-
-   if (a == NULL) return;
-
-   for (i = 0; i < SLASSOC_HASH_TABLE_SIZE; i++)
-     {
-	_SLAssoc_Array_Element_Type *e;
-
-	e = a->elements[i];
-	while (e != NULL)
-	  {
-	     _SLAssoc_Array_Element_Type *next_e;
-
-	     next_e = e->next;
-	     free_element (e);
-	     e = next_e;
-	  }
-     }
-   if (a->flags & HAS_DEFAULT_VALUE)
-     SLang_free_object (&a->default_value);
-
-   SLfree ((char *) a);
-}
-
-_INLINE_
-static SLang_Object_Type *
-find_element (SLang_Assoc_Array_Type *a, char *str, unsigned long hash)
-{
-   unsigned int h;
-   _SLAssoc_Array_Element_Type *e;
-
-   h = (unsigned int) (hash % SLASSOC_HASH_TABLE_SIZE);
-   e = a->elements[h];
-
-   while (e != NULL)
-     {
-	if (str == e->key)       /* slstrings can be compared this way */
-	  {
-#if USE_CACHED_STRING
-	     Cached_String = str;
-	     Cached_Obj = &e->value;
-	     Cached_Array = a;
-#endif
-	     return &e->value;
-	  }
-
-	e = e->next;
-     }
-
-   return NULL;
-}
-
-static _SLAssoc_Array_Element_Type *
-create_element (SLang_Assoc_Array_Type *a, char *str, unsigned long hash)
-{
-   unsigned int h;
-   _SLAssoc_Array_Element_Type *e;
-
-   e = (_SLAssoc_Array_Element_Type *) SLmalloc (sizeof (_SLAssoc_Array_Element_Type));
-   if (e == NULL)
-     return NULL;
-
-   memset ((char *) e, 0, sizeof (_SLAssoc_Array_Element_Type));
-   h = (unsigned int) (hash % SLASSOC_HASH_TABLE_SIZE);
-
-   if (NULL == (str = _SLstring_dup_hashed_string (str, hash)))
-     {
-	SLfree ((char *) e);
-	return NULL;
-     }
-
-   e->key = str;
-   e->next = a->elements[h];
-   a->elements[h] = e;
-
-   a->num_elements += 1;
-#if USE_CACHED_STRING
-   Cached_String = str;
-   Cached_Obj = &e->value;
-   Cached_Array = a;
-#endif
-   return e;
-}
-
-static int store_object (SLang_Assoc_Array_Type *a, char *s, SLang_Object_Type *obj)
-{
-   unsigned long hash;
-   SLang_Object_Type *v;
-
-#if USE_CACHED_STRING
-   if ((s == Cached_String) && (a == Cached_Array))
-     {
-	v = Cached_Obj;
-	SLang_free_object (v);
-     }
-   else
-     {
-#endif
-	hash = _SLcompute_string_hash (s);
-	if (NULL != (v = find_element (a, s, hash)))
-	  SLang_free_object (v);
-	else
-	  {
-	     _SLAssoc_Array_Element_Type *e;
-	     
-	     e = create_element (a, s, hash);
-	     if (e == NULL)
-	       return -1;
-	     
-	     v = &e->value;
-	  }
-#if USE_CACHED_STRING
-     }
-#endif
-
-   *v = *obj;
-
-   return 0;
-}
-
-static void assoc_destroy (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   delete_assoc_array ((SLang_Assoc_Array_Type *) ptr);
-}
-
-static int pop_index (unsigned int num_indices,
-		      SLang_MMT_Type **mmt,
-		      SLang_Assoc_Array_Type **a,
-		      char **str)
-{
-   if (NULL == (*mmt = SLang_pop_mmt (SLANG_ASSOC_TYPE)))
-     {
-	*a = NULL;
-	*str = NULL;
-	return -1;
-     }
-
-   if ((num_indices != 1)
-       || (-1 == SLang_pop_slstring (str)))
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "Assoc_Type arrays require a single string index");
-	SLang_free_mmt (*mmt);
-	*mmt = NULL;
-	*a = NULL;
-	*str = NULL;
-	return -1;
-     }
-
-   *a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (*mmt);
-   return 0;
-}
-
-static int assoc_aget (unsigned char type, unsigned int num_indices)
-{
-   SLang_MMT_Type *mmt;
-   char *str;
-   SLang_Assoc_Array_Type *a;
-   SLang_Object_Type *obj;
-   int ret;
-
-   (void) type;
-
-   if (-1 == pop_index (num_indices, &mmt, &a, &str))
-     return -1;
-
-#if USE_CACHED_STRING
-   if ((str == Cached_String) && (a == Cached_Array))
-     obj = Cached_Obj;
-   else
-#endif
-     obj = find_element (a, str, _SLcompute_string_hash (str));
-
-   if ((obj == NULL)
-       && (a->flags & HAS_DEFAULT_VALUE))
-     obj = &a->default_value;
-
-   if (obj == NULL)
-     {
-	SLang_verror (SL_INTRINSIC_ERROR,
-		      "No such element in Assoc Array: %s", str);
-	ret = -1;
-     }
-   else
-     {
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	if (SLANG_CLASS_TYPE_SCALAR == _SLclass_Class_Type[obj->data_type])
-	  ret = SLang_push (obj);
-#endif
-	else
-	  ret = _SLpush_slang_obj (obj);
-     }
-
-   SLang_free_slstring (str);
-   SLang_free_mmt (mmt);
-   return ret;
-}
-
-static int assoc_aput (unsigned char type, unsigned int num_indices)
-{
-   SLang_MMT_Type *mmt;
-   char *str;
-   SLang_Assoc_Array_Type *a;
-   SLang_Object_Type obj;
-   int ret;
-
-   (void) type;
-
-   if (-1 == pop_index (num_indices, &mmt, &a, &str))
-     return -1;
-
-   ret = -1;
-
-   if (0 == SLang_pop (&obj))
-     {
-	if ((obj.data_type != a->type)
-#if USE_NEW_ANYTYPE_CODE
-	    && (a->type != SLANG_ANY_TYPE)
-#endif
-	    )
-	  {
-	     (void) SLang_push (&obj);
-	     if ((-1 == SLclass_typecast (a->type, 1, 1))
-		 || (-1 == SLang_pop (&obj)))
-	       goto the_return;
-	  }
-	
-	if (-1 == store_object (a, str, &obj))
-	  SLang_free_object (&obj);
-	else
-	  ret = 0;
-     }
-
-   the_return:
-   SLang_free_slstring (str);
-   SLang_free_mmt (mmt);
-   return ret;
-}
-
-static int assoc_anew (unsigned char type, unsigned int num_dims)
-{
-   SLang_MMT_Type *mmt;
-   SLang_Assoc_Array_Type *a;
-   int has_default_value;
-
-   has_default_value = 0;
-   switch (num_dims)
-     {
-      case 0:
-	type = SLANG_ANY_TYPE;
-	break;
-      case 2:
-	(void) SLreverse_stack (2);
-	has_default_value = 1;
-	/* drop */
-      case 1:
-	if (0 == _SLang_pop_datatype (&type))
-	  break;
-	num_dims--;
-	/* drop */
-      default:
-	SLdo_pop_n (num_dims);
-	SLang_verror (SL_SYNTAX_ERROR, "Usage: Assoc_Type [DataType_Type]");
-	return -1;
-     }
-
-   a = alloc_assoc_array (type, has_default_value);
-   if (a == NULL)
-     return -1;
-
-   if (NULL == (mmt = SLang_create_mmt (SLANG_ASSOC_TYPE, (VOID_STAR) a)))
-     {
-	delete_assoc_array (a);
-	return -1;
-     }
-
-   if (-1 == SLang_push_mmt (mmt))
-     {
-	SLang_free_mmt (mmt);
-	return -1;
-     }
-
-   return 0;
-}
-
-static void assoc_get_keys (SLang_Assoc_Array_Type *a)
-{
-   SLang_Array_Type *at;
-   int num;
-   unsigned int i, j;
-   char **data;
-
-   /* Note: If support for threads is added, then we need to modify this
-    * algorithm to prevent another thread from modifying the array.
-    * However, that should be handled in inner_interp.
-    */
-   num = a->num_elements;
-
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &num, 1)))
-     return;
-
-   data = (char **)at->data;
-
-   i = 0;
-   for (j = 0; j < SLASSOC_HASH_TABLE_SIZE; j++)
-     {
-	_SLAssoc_Array_Element_Type *e;
-
-	e = a->elements[j];
-	while (e != NULL)
-	  {
-	     /* Next cannot fail because it is an slstring */
-	     data [i] = SLang_create_slstring (e->key);
-	     e = e->next;
-	     i++;
-	  }
-     }
-   (void) SLang_push_array (at, 1);
-}
-
-static int
-transfer_element (SLang_Class_Type *cl, VOID_STAR dest_data,
-		  SLang_Object_Type *obj)
-{
-   unsigned int sizeof_type;
-   VOID_STAR src_data;
-
-#if USE_NEW_ANYTYPE_CODE
-   if (cl->cl_data_type == SLANG_ANY_TYPE)
-     {
-	SLang_Any_Type *any;
-
-	if ((-1 == _SLpush_slang_obj (obj))
-	    || (-1 == SLang_pop_anytype (&any)))
-	  return -1;
-	
-	*(SLang_Any_Type **)dest_data = any;
-	return 0;
-     }
-#endif
-   /* Optimize for scalar */
-   if (cl->cl_class_type == SLANG_CLASS_TYPE_SCALAR)
-     {
-	sizeof_type = cl->cl_sizeof_type;
-	memcpy ((char *) dest_data, (char *)&obj->v, sizeof_type);
-	return 0;
-     }
-
-   src_data = _SLclass_get_ptr_to_value (cl, obj);
-
-   if (-1 == (*cl->cl_acopy) (cl->cl_data_type, src_data, dest_data))
-     return -1;
-
-   return 0;
-}
-
-static void assoc_get_values (SLang_Assoc_Array_Type *a)
-{
-   SLang_Array_Type *at;
-   int num;
-   unsigned int i, j;
-   char *dest_data;
-   unsigned char type;
-   SLang_Class_Type *cl;
-   unsigned int sizeof_type;
-
-   /* Note: If support for threads is added, then we need to modify this
-    * algorithm to prevent another thread from modifying the array.
-    * However, that should be handled in inner_interp.
-    */
-   num = a->num_elements;
-   type = a->type;
-
-   cl = _SLclass_get_class (type);
-   sizeof_type = cl->cl_sizeof_type;
-
-   if (NULL == (at = SLang_create_array (type, 0, NULL, &num, 1)))
-     return;
-
-   dest_data = (char *)at->data;
-
-   i = 0;
-   for (j = 0; j < SLASSOC_HASH_TABLE_SIZE; j++)
-     {
-	_SLAssoc_Array_Element_Type *e;
-
-	e = a->elements[j];
-	while (e != NULL)
-	  {
-	     if (-1 == transfer_element (cl, (VOID_STAR) dest_data, &e->value))
-	       {
-		  SLang_free_array (at);
-		  return;
-	       }
-
-	     dest_data += sizeof_type;
-	     e = e->next;
-	     i++;
-	  }
-     }
-   (void) SLang_push_array (at, 1);
-}
-
-static int assoc_key_exists (SLang_Assoc_Array_Type *a, char *key)
-{
-   return (NULL != find_element (a, key, _SLcompute_string_hash (key)));
-}
-
-static void assoc_delete_key (SLang_Assoc_Array_Type *a, char *key)
-{
-   unsigned int h;
-   _SLAssoc_Array_Element_Type *v, *v0;
-
-   h = (unsigned int) (_SLcompute_string_hash (key) % SLASSOC_HASH_TABLE_SIZE);
-
-   v0 = NULL;
-   v = a->elements[h];
-   while (v != NULL)
-     {
-	if (v->key == key)
-	  {
-	     if (v0 != NULL)
-	       v0->next = v->next;
-	     else
-	       a->elements[h] = v->next;
-
-	     free_element (v);
-	     a->num_elements -= 1;
-	     return;
-	  }
-	v0 = v;
-	v = v->next;
-     }
-
-   /* No such element.  Let it pass with no error. */
-}
-
-#define A SLANG_ASSOC_TYPE
-#define S SLANG_STRING_TYPE
-static SLang_Intrin_Fun_Type Assoc_Table [] =
-{
-   MAKE_INTRINSIC_1("assoc_get_keys", assoc_get_keys, SLANG_VOID_TYPE, A),
-   MAKE_INTRINSIC_1("assoc_get_values", assoc_get_values, SLANG_VOID_TYPE, A),
-   MAKE_INTRINSIC_2("assoc_key_exists", assoc_key_exists, SLANG_INT_TYPE, A, S),
-   MAKE_INTRINSIC_2("assoc_delete_key", assoc_delete_key, SLANG_VOID_TYPE, A, S),
-
-   SLANG_END_INTRIN_FUN_TABLE
-};
-#undef A
-#undef S
-
-static int assoc_length (unsigned char type, VOID_STAR v, unsigned int *len)
-{
-   SLang_Assoc_Array_Type *a;
-
-   (void) type;
-   a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (*(SLang_MMT_Type **)v);
-   *len = a->num_elements;
-   return 0;
-}
-
-struct _SLang_Foreach_Context_Type
-{
-   SLang_MMT_Type *mmt;
-   SLang_Assoc_Array_Type *a;
-   unsigned int this_hash_index;
-   unsigned int next_same_hash_index;
-#define CTX_WRITE_KEYS		1
-#define CTX_WRITE_VALUES	2
-   unsigned char flags;
-};
-
-static SLang_Foreach_Context_Type *
-cl_foreach_open (unsigned char type, unsigned int num)
-{
-   SLang_Foreach_Context_Type *c;
-   unsigned char flags;
-   SLang_MMT_Type *mmt;
-
-   (void) type;
-
-   if (NULL == (mmt = SLang_pop_mmt (SLANG_ASSOC_TYPE)))
-     return NULL;
-
-   flags = 0;
-
-   while (num--)
-     {
-	char *s;
-
-	if (-1 == SLang_pop_slstring (&s))
-	  {
-	     SLang_free_mmt (mmt);
-	     return NULL;
-	  }
-
-	if (0 == strcmp (s, "keys"))
-	  flags |= CTX_WRITE_KEYS;
-	else if (0 == strcmp (s, "values"))
-	  flags |= CTX_WRITE_VALUES;
-	else
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED,
-			   "using '%s' not supported by SLassoc_Type",
-			   s);
-	     SLang_free_slstring (s);
-	     SLang_free_mmt (mmt);
-	     return NULL;
-	  }
-
-	SLang_free_slstring (s);
-     }
-
-   if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
-     {
-	SLang_free_mmt (mmt);
-	return NULL;
-     }
-
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
-   if (flags == 0) flags = CTX_WRITE_VALUES|CTX_WRITE_KEYS;
-
-   c->flags = flags;
-   c->mmt = mmt;
-   c->a = (SLang_Assoc_Array_Type *) SLang_object_from_mmt (mmt);
-
-   return c;
-}
-
-static void cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-   SLang_free_mmt (c->mmt);
-   SLfree ((char *) c);
-}
-
-static int cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   SLang_Assoc_Array_Type *a;
-   _SLAssoc_Array_Element_Type *e;
-   unsigned int i, j;
-
-   (void) type;
-
-   if (c == NULL)
-     return -1;
-
-   a = c->a;
-
-   i = c->this_hash_index;
-   if (i >= SLASSOC_HASH_TABLE_SIZE)
-     return 0;
-
-   e = a->elements[i];
-
-   j = c->next_same_hash_index;
-   c->next_same_hash_index = j + 1;
-
-   while ((j > 0) && (e != NULL))
-     {
-	j--;
-	e = e->next;
-     }
-
-   if (e == NULL)
-     {
-	do
-	  {
-	     i++;
-	     if (i >= SLASSOC_HASH_TABLE_SIZE)
-	       return 0;		       /* no more */
-	  }
-	while (a->elements [i] == NULL);
-
-	e = a->elements[i];
-	c->this_hash_index = i;
-	c->next_same_hash_index = 1;
-     }
-
-   if ((c->flags & CTX_WRITE_KEYS)
-       && (-1 == SLang_push_string (e->key)))
-     return -1;
-
-   if ((c->flags & CTX_WRITE_VALUES)
-       && (-1 == _SLpush_slang_obj (&e->value)))
-     return -1;
-
-   /* keep going */
-   return 1;
-}
-
-int SLang_init_slassoc (void)
-{
-   SLang_Class_Type *cl;
-
-   if (SLclass_is_class_defined (SLANG_ASSOC_TYPE))
-     return 0;
-
-   if (NULL == (cl = SLclass_allocate_class ("Assoc_Type")))
-     return -1;
-
-   (void) SLclass_set_destroy_function (cl, assoc_destroy);
-   (void) SLclass_set_aput_function (cl, assoc_aput);
-   (void) SLclass_set_aget_function (cl, assoc_aget);
-   (void) SLclass_set_anew_function (cl, assoc_anew);
-   cl->cl_length = assoc_length;
-   cl->cl_foreach_open = cl_foreach_open;
-   cl->cl_foreach_close = cl_foreach_close;
-   cl->cl_foreach = cl_foreach;
-
-   if (-1 == SLclass_register_class (cl, SLANG_ASSOC_TYPE, sizeof (SLang_Assoc_Array_Type), SLANG_CLASS_TYPE_MMT))
-     return -1;
-
-   if (-1 == SLadd_intrin_fun_table (Assoc_Table, "__SLASSOC__"))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slbstr.c b/mdk-stage1/slang/slbstr.c
deleted file mode 100644
index b4b8c4c51..000000000
--- a/mdk-stage1/slang/slbstr.c
+++ /dev/null
@@ -1,615 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-struct _SLang_BString_Type
-{
-   unsigned int num_refs;
-   unsigned int len;
-   int ptr_type;
-#define IS_SLSTRING		1
-#define IS_MALLOCED		2
-#define IS_NOT_TO_BE_FREED	3
-   union
-     {
-	unsigned char bytes[1];
-	unsigned char *ptr;
-     }
-   v;
-};
-
-#define BS_GET_POINTER(b) ((b)->ptr_type ? (b)->v.ptr : (b)->v.bytes)
-
-static SLang_BString_Type *create_bstring_of_type (char *bytes, unsigned int len, int type)
-{
-   SLang_BString_Type *b;
-   unsigned int size;
-
-   size = sizeof(SLang_BString_Type);
-   if (type == 0)
-     size += len;
-
-   if (NULL == (b = (SLang_BString_Type *)SLmalloc (size)))
-     return NULL;
-
-   b->len = len;
-   b->num_refs = 1;
-   b->ptr_type = type;
-
-   switch (type)
-     {
-      case 0:
-	if (bytes != NULL) memcpy ((char *) b->v.bytes, bytes, len);
-	/* Now \0 terminate it because we want to also use it as a C string
-	 * whenever possible.  Note that sizeof(SLang_BString_Type) includes
-	 * space for 1 character and we allocated len extra bytes.  Thus, it is
-	 * ok to add a \0 to the end.
-	 */
-	b->v.bytes[len] = 0;
-	break;
-
-      case IS_SLSTRING:
-	if (NULL == (b->v.ptr = (unsigned char *)SLang_create_nslstring (bytes, len)))
-	  {
-	     SLfree ((char *) b);
-	     return NULL;
-	  }
-	break;
-
-      case IS_MALLOCED:
-      case IS_NOT_TO_BE_FREED:
-	b->v.ptr = (unsigned char *)bytes;
-	bytes [len] = 0;	       /* NULL terminate */
-	break;
-     }
-
-   return b;
-}
-
-SLang_BString_Type *
-SLbstring_create (unsigned char *bytes, unsigned int len)
-{
-   return create_bstring_of_type ((char *)bytes, len, 0);
-}
-
-/* Note that ptr must be len + 1 bytes long for \0 termination */
-SLang_BString_Type *
-SLbstring_create_malloced (unsigned char *ptr, unsigned int len, int free_on_error)
-{
-   SLang_BString_Type *b;
-
-   if (ptr == NULL)
-     return NULL;
-
-   if (NULL == (b = create_bstring_of_type ((char *)ptr, len, IS_MALLOCED)))
-     {
-	if (free_on_error)
-	  SLfree ((char *) ptr);
-     }
-   return b;
-}
-
-SLang_BString_Type *SLbstring_create_slstring (char *s)
-{
-   if (s == NULL)
-     return NULL;
-
-   return create_bstring_of_type (s, strlen (s), IS_SLSTRING);
-}
-
-SLang_BString_Type *SLbstring_dup (SLang_BString_Type *b)
-{
-   if (b != NULL)
-     b->num_refs += 1;
-
-   return b;
-}
-
-unsigned char *SLbstring_get_pointer (SLang_BString_Type *b, unsigned int *len)
-{
-   if (b == NULL)
-     {
-	*len = 0;
-	return NULL;
-     }
-   *len = b->len;
-   return BS_GET_POINTER(b);
-}
-
-void SLbstring_free (SLang_BString_Type *b)
-{
-   if (b == NULL)
-     return;
-
-   if (b->num_refs > 1)
-     {
-	b->num_refs -= 1;
-	return;
-     }
-
-   switch (b->ptr_type)
-     {
-      case 0:
-      case IS_NOT_TO_BE_FREED:
-      default:
-	break;
-
-      case IS_SLSTRING:
-	SLang_free_slstring ((char *)b->v.ptr);
-	break;
-
-      case IS_MALLOCED:
-	SLfree ((char *)b->v.ptr);
-	break;
-     }
-
-   SLfree ((char *) b);
-}
-
-int SLang_pop_bstring (SLang_BString_Type **b)
-{
-   return SLclass_pop_ptr_obj (SLANG_BSTRING_TYPE, (VOID_STAR *)b);
-}
-
-int SLang_push_bstring (SLang_BString_Type *b)
-{
-   if (b == NULL)
-     return SLang_push_null ();
-
-   b->num_refs += 1;
-
-   if (0 == SLclass_push_ptr_obj (SLANG_BSTRING_TYPE, (VOID_STAR)b))
-     return 0;
-
-   b->num_refs -= 1;
-   return -1;
-}
-
-static int
-bstring_bstring_bin_op_result (int op, unsigned char a, unsigned char b,
-			       unsigned char *c)
-{
-   (void) a;
-   (void) b;
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	*c = SLANG_BSTRING_TYPE;
-	break;
-
-      case SLANG_GT:
-      case SLANG_GE:
-      case SLANG_LT:
-      case SLANG_LE:
-      case SLANG_EQ:
-      case SLANG_NE:
-	*c = SLANG_CHAR_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int compare_bstrings (SLang_BString_Type *a, SLang_BString_Type *b)
-{
-   unsigned int len;
-   int ret;
-
-   len = a->len;
-   if (b->len < len) len = b->len;
-
-   ret = memcmp ((char *)BS_GET_POINTER(b), (char *)BS_GET_POINTER(a), len);
-   if (ret != 0)
-     return ret;
-
-   if (a->len > b->len)
-     return 1;
-   if (a->len == b->len)
-     return 0;
-
-   return -1;
-}
-
-static SLang_BString_Type *
-concat_bstrings (SLang_BString_Type *a, SLang_BString_Type *b)
-{
-   unsigned int len;
-   SLang_BString_Type *c;
-   char *bytes;
-
-   len = a->len + b->len;
-
-   if (NULL == (c = SLbstring_create (NULL, len)))
-     return NULL;
-
-   bytes = (char *)BS_GET_POINTER(c);
-
-   memcpy (bytes, (char *)BS_GET_POINTER(a), a->len);
-   memcpy (bytes + a->len, (char *)BS_GET_POINTER(b), b->len);
-
-   return c;
-}
-
-static void free_n_bstrings (SLang_BString_Type **a, unsigned int n)
-{
-   unsigned int i;
-
-   if (a == NULL) return;
-
-   for (i = 0; i < n; i++)
-     {
-	SLbstring_free (a[i]);
-	a[i] = NULL;
-     }
-}
-
-static int
-bstring_bstring_bin_op (int op,
-			unsigned char a_type, VOID_STAR ap, unsigned int na,
-			unsigned char b_type, VOID_STAR bp, unsigned int nb,
-			VOID_STAR cp)
-{
-   char *ic;
-   SLang_BString_Type **a, **b, **c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   if (na == 1) da = 0; else da = 1;
-   if (nb == 1) db = 0; else db = 1;
-
-   if (na > nb) n_max = na; else n_max = nb;
-
-   a = (SLang_BString_Type **) ap;
-   b = (SLang_BString_Type **) bp;
-   for (n = 0; n < n_max; n++)
-     {
-	if ((*a == NULL) || (*b == NULL))
-	  {
-	     SLang_verror (SL_VARIABLE_UNINITIALIZED,
-			   "Binary string element[%u] not initialized for binary operation", n);
-	     return -1;
-	  }
-	a += da; b += db;
-     }
-
-   a = (SLang_BString_Type **) ap;
-   b = (SLang_BString_Type **) bp;
-   ic = (char *) cp;
-   c = NULL;
-
-   switch (op)
-     {
-       case SLANG_PLUS:
-	/* Concat */
-	c = (SLang_BString_Type **) cp;
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (NULL == (c[n] = concat_bstrings (*a, *b)))
-	       goto return_error;
-
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (0 != compare_bstrings (*a, *b));
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_GT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) > 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_GE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) >= 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_LT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) < 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_LE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) <= 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_EQ:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (compare_bstrings (*a, *b) == 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-     }
-   return 1;
-
-   return_error:
-   if (c != NULL)
-     {
-	free_n_bstrings (c, n);
-	while (n < n_max)
-	  {
-	     c[n] = NULL;
-	     n++;
-	  }
-     }
-   return -1;
-}
-
-/* If preserve_ptr, then use a[i] as the bstring data.  See how this function
- * is called by the binary op routines for why.
- */
-static SLang_BString_Type **
-make_n_bstrings (SLang_BString_Type **b, char **a, unsigned int n, int ptr_type)
-{
-   unsigned int i;
-   int malloc_flag;
-
-   malloc_flag = 0;
-   if (b == NULL)
-     {
-	b = (SLang_BString_Type **) SLmalloc ((n + 1) * sizeof (SLang_BString_Type *));
-	if (b == NULL)
-	  return NULL;
-	malloc_flag = 1;
-     }
-
-   for (i = 0; i < n; i++)
-     {
-	char *s = a[i];
-
-	if (s == NULL)
-	  {
-	     b[i] = NULL;
-	     continue;
-	  }
-
-	if (NULL == (b[i] = create_bstring_of_type (s, strlen(s), ptr_type)))
-	  {
-	     free_n_bstrings (b, i);
-	     if (malloc_flag) SLfree ((char *) b);
-	     return NULL;
-	  }
-     }
-
-   return b;
-}
-
-static int
-bstring_string_bin_op (int op,
-		       unsigned char a_type, VOID_STAR ap, unsigned int na,
-		       unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		       VOID_STAR cp)
-{
-   SLang_BString_Type **b;
-   int ret;
-
-   if (NULL == (b = make_n_bstrings (NULL, (char **)bp, nb, IS_NOT_TO_BE_FREED)))
-     return -1;
-
-   b_type = SLANG_BSTRING_TYPE;
-   ret = bstring_bstring_bin_op (op,
-				 a_type, ap, na,
-				 b_type, (VOID_STAR) b, nb,
-				 cp);
-   free_n_bstrings (b, nb);
-   SLfree ((char *) b);
-   return ret;
-}
-
-static int
-string_bstring_bin_op (int op,
-		       unsigned char a_type, VOID_STAR ap, unsigned int na,
-		       unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		       VOID_STAR cp)
-{
-   SLang_BString_Type **a;
-   int ret;
-
-   if (NULL == (a = make_n_bstrings (NULL, (char **)ap, na, IS_NOT_TO_BE_FREED)))
-     return -1;
-
-   a_type = SLANG_BSTRING_TYPE;
-   ret = bstring_bstring_bin_op (op,
-				 a_type, (VOID_STAR) a, na,
-				 b_type, bp, nb,
-				 cp);
-   free_n_bstrings (a, na);
-   SLfree ((char *) a);
-
-   return ret;
-}
-
-static void bstring_destroy (unsigned char unused, VOID_STAR s)
-{
-   (void) unused;
-   SLbstring_free (*(SLang_BString_Type **) s);
-}
-
-static int bstring_push (unsigned char unused, VOID_STAR sptr)
-{
-   (void) unused;
-
-   return SLang_push_bstring (*(SLang_BString_Type **) sptr);
-}
-
-static int string_to_bstring (unsigned char a_type, VOID_STAR ap, unsigned int na,
-			      unsigned char b_type, VOID_STAR bp)
-{
-   char **s;
-   SLang_BString_Type **b;
-
-   (void) a_type;
-   (void) b_type;
-
-   s = (char **) ap;
-   b = (SLang_BString_Type **) bp;
-
-   if (NULL == make_n_bstrings (b, s, na, IS_SLSTRING))
-     return -1;
-
-   return 1;
-}
-
-static int bstring_to_string (unsigned char a_type, VOID_STAR ap, unsigned int na,
-			      unsigned char b_type, VOID_STAR bp)
-{
-   char **s;
-   unsigned int i;
-   SLang_BString_Type **a;
-
-   (void) a_type;
-   (void) b_type;
-
-   s = (char **) bp;
-   a = (SLang_BString_Type **) ap;
-
-   for (i = 0; i < na; i++)
-     {
-	SLang_BString_Type *ai = a[i];
-
-	if (ai == NULL)
-	  {
-	     s[i] = NULL;
-	     continue;
-	  }
-
-	if (NULL == (s[i] = SLang_create_slstring ((char *)BS_GET_POINTER(ai))))
-	  {
-	     while (i != 0)
-	       {
-		  i--;
-		  SLang_free_slstring (s[i]);
-		  s[i] = NULL;
-	       }
-	     return -1;
-	  }
-     }
-
-   return 1;
-}
-
-static char *bstring_string (unsigned char type, VOID_STAR v)
-{
-   SLang_BString_Type *s;
-   unsigned char buf[128];
-   unsigned char *bytes, *bytes_max;
-   unsigned char *b, *bmax;
-
-   (void) type;
-
-   s = *(SLang_BString_Type **) v;
-   bytes = BS_GET_POINTER(s);
-   bytes_max = bytes + s->len;
-
-   b = buf;
-   bmax = buf + (sizeof (buf) - 4);
-
-   while (bytes < bytes_max)
-     {
-	unsigned char ch = *bytes;
-
-	if ((ch < 32) || (ch >= 127) || (ch == '\\'))
-	  {
-	     if (b + 4 > bmax)
-	       break;
-
-	     sprintf ((char *) b, "\\%03o", ch);
-	     b += 4;
-	  }
-	else
-	  {
-	     if (b == bmax)
-	       break;
-
-	     *b++ = ch;
-	  }
-
-	bytes++;
-     }
-
-   if (bytes < bytes_max)
-     {
-	*b++ = '.';
-	*b++ = '.';
-	*b++ = '.';
-     }
-   *b = 0;
-
-   return SLmake_string ((char *)buf);
-}
-
-static unsigned int bstrlen_cmd (SLang_BString_Type *b)
-{
-   return b->len;
-}
-
-static SLang_Intrin_Fun_Type BString_Table [] = /*{{{*/
-{
-   MAKE_INTRINSIC_1("bstrlen",  bstrlen_cmd, SLANG_UINT_TYPE, SLANG_BSTRING_TYPE),
-   MAKE_INTRINSIC_0("pack", _SLpack, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_2("unpack", _SLunpack, SLANG_VOID_TYPE, SLANG_STRING_TYPE, SLANG_BSTRING_TYPE),
-   MAKE_INTRINSIC_1("pad_pack_format", _SLpack_pad_format, SLANG_VOID_TYPE, SLANG_STRING_TYPE),
-   MAKE_INTRINSIC_1("sizeof_pack", _SLpack_compute_size, SLANG_UINT_TYPE, SLANG_STRING_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLang_init_bstring (void)
-{
-   SLang_Class_Type *cl;
-
-   if (NULL == (cl = SLclass_allocate_class ("BString_Type")))
-     return -1;
-   (void) SLclass_set_destroy_function (cl, bstring_destroy);
-   (void) SLclass_set_push_function (cl, bstring_push);
-   (void) SLclass_set_string_function (cl, bstring_string);
-
-   if (-1 == SLclass_register_class (cl, SLANG_BSTRING_TYPE, sizeof (char *),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   if ((-1 == SLclass_add_typecast (SLANG_BSTRING_TYPE, SLANG_STRING_TYPE, bstring_to_string, 1))
-       || (-1 == SLclass_add_typecast (SLANG_STRING_TYPE, SLANG_BSTRING_TYPE, string_to_bstring, 1))
-       || (-1 == SLclass_add_binary_op (SLANG_BSTRING_TYPE, SLANG_BSTRING_TYPE, bstring_bstring_bin_op, bstring_bstring_bin_op_result))
-       || (-1 == SLclass_add_binary_op (SLANG_STRING_TYPE, SLANG_BSTRING_TYPE, string_bstring_bin_op, bstring_bstring_bin_op_result))
-       || (-1 == SLclass_add_binary_op (SLANG_BSTRING_TYPE, SLANG_STRING_TYPE, bstring_string_bin_op, bstring_bstring_bin_op_result)))
-
-     return -1;
-
-   if (-1 == SLadd_intrin_fun_table (BString_Table, NULL))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slclass.c b/mdk-stage1/slang/slclass.c
deleted file mode 100644
index 733888cb8..000000000
--- a/mdk-stage1/slang/slclass.c
+++ /dev/null
@@ -1,1391 +0,0 @@
-/* User defined objects */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-unsigned char _SLclass_Class_Type [256];
-#endif
-
-static SLang_Class_Type *Registered_Types[256];
-SLang_Class_Type *_SLclass_get_class (unsigned char type)
-{
-   SLang_Class_Type *cl;
-
-   cl = Registered_Types [type];
-   if (cl == NULL)
-     SLang_exit_error ("Application error: Type %d not registered", (int) type);
-
-   return cl;
-}
-
-int SLclass_is_class_defined (unsigned char type)
-{
-   return (NULL != Registered_Types[type]);
-}
-
-VOID_STAR _SLclass_get_ptr_to_value (SLang_Class_Type *cl,
-				     SLang_Object_Type *obj)
-{
-   VOID_STAR p;
-
-   switch (cl->cl_class_type)
-     {
-      case SLANG_CLASS_TYPE_MMT:
-      case SLANG_CLASS_TYPE_PTR:
-      case SLANG_CLASS_TYPE_SCALAR:
-	p = (VOID_STAR) &obj->v;
-	break;
-
-      case SLANG_CLASS_TYPE_VECTOR:
-	p = obj->v.ptr_val;
-	break;
-
-      default:
-	p = NULL;
-     }
-   return p;
-}
-
-char *SLclass_get_datatype_name (unsigned char stype)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (stype);
-   return cl->cl_name;
-}
-
-static int method_undefined_error (unsigned char type, char *method, char *name)
-{
-   if (name == NULL) name = SLclass_get_datatype_name (type);
-
-   SLang_verror (SL_TYPE_MISMATCH, "%s method not defined for %s",
-		 method, name);
-   return -1;
-}
-
-static int
-scalar_vector_bin_op_result (int op, unsigned char a, unsigned char b,
-			     unsigned char *c)
-{
-   (void) a; (void) b;
-   switch (op)
-     {
-      case SLANG_NE:
-      case SLANG_EQ:
-	*c = SLANG_INT_TYPE;
-	return 1;
-     }
-   return 0;
-}
-
-static int
-scalar_vector_bin_op (int op,
-		      unsigned char a_type, VOID_STAR ap, unsigned int na,
-		      unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		      VOID_STAR cp)
-{
-   int *c;
-   char *a, *b;
-   unsigned int da, db;
-   unsigned int n, n_max;
-   unsigned int data_type_len;
-   SLang_Class_Type *cl;
-
-   (void) b_type;
-   cl = _SLclass_get_class (a_type);
-
-   data_type_len = cl->cl_sizeof_type;
-
-   a = (char *) ap;
-   b = (char *) bp;
-   c = (int *) cp;
-
-   if (na == 1) da = 0; else da = data_type_len;
-   if (nb == 1) db = 0; else db = data_type_len;
-   if (na > nb) n_max = na; else n_max = nb;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_NE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (0 != SLMEMCMP(a, b, data_type_len));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ:
-	for (n = 0; n < n_max; n++)
-	  {
-	     c[n] = (0 == SLMEMCMP(a, b, data_type_len));
-	     a += da; b += db;
-	  }
-	break;
-     }
-   return 1;
-}
-
-static int scalar_fread (unsigned char type, FILE *fp, VOID_STAR ptr,
-			 unsigned int desired, unsigned int *actual)
-{
-   unsigned int n;
-
-   n = fread ((char *) ptr, _SLclass_get_class (type)->cl_sizeof_type,
-	      desired, fp);
-   *actual = n;
-   return 0;
-}
-
-static int scalar_fwrite (unsigned char type, FILE *fp, VOID_STAR ptr,
-			  unsigned int desired, unsigned int *actual)
-{
-   unsigned int n;
-
-   n = fwrite ((char *) ptr, _SLclass_get_class (type)->cl_sizeof_type,
-	       desired, fp);
-   *actual = n;
-   return 0;
-}
-
-static int vector_apush (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   return (*cl->cl_push)(type, (VOID_STAR) &ptr);
-}
-
-static int vector_apop (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   return (*cl->cl_pop)(type, (VOID_STAR) &ptr);
-}
-
-static int default_push_mmt (unsigned char type_unused, VOID_STAR ptr)
-{
-   SLang_MMT_Type *ref;
-
-   (void) type_unused;
-   ref = *(SLang_MMT_Type **) ptr;
-   return SLang_push_mmt (ref);
-}
-
-static void default_destroy_simple (unsigned char type_unused, VOID_STAR ptr_unused)
-{
-   (void) type_unused;
-   (void) ptr_unused;
-}
-
-static void default_destroy_user (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   SLang_free_mmt (*(SLang_MMT_Type **) ptr);
-}
-
-static int default_pop (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_pop_ptr_obj (type, (VOID_STAR *) ptr);
-}
-
-static int default_datatype_deref (unsigned char type)
-{
-   return method_undefined_error (type, "datatype_deref", NULL);
-}
-
-static int default_acopy (unsigned char type, VOID_STAR from, VOID_STAR to)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   if (-1 == (*cl->cl_apush) (type, from))
-     return -1;
-   return (*cl->cl_apop) (type, to);
-}
-
-static int default_dereference_object (unsigned char type, VOID_STAR ptr)
-{
-   (void) ptr;
-   return method_undefined_error (type, "dereference", NULL);
-}
-
-static char *default_string (unsigned char stype, VOID_STAR v)
-{
-   char buf [256];
-   char *s;
-#if SLANG_HAS_COMPLEX
-   double *cplx;
-#endif
-   s = buf;
-
-   switch (stype)
-     {
-      case SLANG_STRING_TYPE:
-	s = *(char **) v;
-	break;
-
-      case SLANG_NULL_TYPE:
-	s = "NULL";
-	break;
-
-      case SLANG_DATATYPE_TYPE:
-	s = SLclass_get_datatype_name ((unsigned char) *(int *)v);
-	break;
-
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	cplx = *(double **) v;
-	if (cplx[1] < 0)
-	  sprintf (s, "(%g - %gi)", cplx [0], -cplx [1]);
-	else
-	  sprintf (s, "(%g + %gi)", cplx [0], cplx [1]);
-	break;
-#endif
-      default:
-	s = SLclass_get_datatype_name (stype);
-     }
-
-   return SLmake_string (s);
-}
-
-static int
-use_cmp_bin_op_result (int op, unsigned char a, unsigned char b,
-		       unsigned char *c)
-{
-   if (a != b)
-     return 0;
-   switch (op)
-     {
-      case SLANG_NE:
-      case SLANG_EQ:
-      case SLANG_LT:
-      case SLANG_LE:
-      case SLANG_GT:
-      case SLANG_GE:
-	*c = SLANG_INT_TYPE;
-	return 1;
-     }
-   return 0;
-}
-
-static int
-use_cmp_bin_op (int op,
-		unsigned char a_type, VOID_STAR ap, unsigned int na,
-		unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		VOID_STAR cp)
-{
-   int *c;
-   char *a, *b;
-   unsigned int da, db;
-   unsigned int n, n_max;
-   unsigned int data_type_len;
-   SLang_Class_Type *cl;
-   int (*cmp)(unsigned char, VOID_STAR, VOID_STAR, int *);
-
-   (void) b_type;
-   cl = _SLclass_get_class (a_type);
-   cmp = cl->cl_cmp;
-   data_type_len = cl->cl_sizeof_type;
-
-   a = (char *) ap;
-   b = (char *) bp;
-   c = (int *) cp;
-
-   if (na == 1) da = 0; else da = data_type_len;
-   if (nb == 1) db = 0; else db = data_type_len;
-   if (na > nb) n_max = na; else n_max = nb;
-
-   switch (op)
-     {
-	int result;
-	
-      default:
-	return 0;
-
-      case SLANG_NE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result != 0);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result == 0);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_GT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result > 0);
-	     a += da; b += db;
-	  }
-	break;
-      case SLANG_GE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result >= 0);
-	     a += da; b += db;
-	  }
-	break;
-      case SLANG_LT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result < 0);
-	     a += da; b += db;
-	  }
-	break;
-      case SLANG_LE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (-1 == (*cmp) (a_type, (VOID_STAR)a, (VOID_STAR)b, &result))
-	       return -1;
-	     c[n] = (result <= 0);
-	     a += da; b += db;
-	  }
-	break;
-     }
-   return 1;
-}
-
-
-int SLclass_get_class_id (SLang_Class_Type *cl)
-{
-   if (cl == NULL)
-     return -1;
-   return (int) cl->cl_data_type;
-}
-
-SLang_Class_Type *SLclass_allocate_class (char *name)
-{
-   SLang_Class_Type *cl;
-   unsigned int i;
-
-   for (i = 0; i < 256; i++)
-     {
-	cl = Registered_Types [i];
-	if ((cl != NULL)
-	    && (0 == strcmp (cl->cl_name, name)))
-	  {
-	     SLang_verror (SL_DUPLICATE_DEFINITION, "Type name %s already exists", name);
-	     return NULL;
-	  }
-     }
-
-   cl = (SLang_Class_Type *) SLmalloc (sizeof (SLang_Class_Type));
-   if (cl == NULL) return NULL;
-
-   SLMEMSET ((char *) cl, 0, sizeof (SLang_Class_Type));
-
-   if (NULL == (cl->cl_name = SLang_create_slstring (name)))
-     {
-	SLfree ((char *) cl);
-	return NULL;
-     }
-
-   return cl;
-}
-
-static int DataType_Ids [256];
-
-int _SLang_push_datatype (unsigned char data_type)
-{
-   /* This data type could be a copy of another type, e.g., short and
-    * int if they are the same size (Int16 == Short).  So, make sure
-    * we push the original and not the copy. 
-    */
-   data_type = _SLclass_get_class (data_type)->cl_data_type;
-   return SLclass_push_int_obj (SLANG_DATATYPE_TYPE, (int) data_type);
-}
-
-static int datatype_deref (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Class_Type *cl;
-   int status;
-
-   /* The parser generated code for this as if a function call were to be
-    * made.  However, we are calling the deref object routine
-    * instead of the function call.  So, I must simulate the function call.
-    */
-   if (-1 == _SL_increment_frame_pointer ())
-     return -1;
-
-   type = (unsigned char) *(int *) ptr;
-   cl = _SLclass_get_class (type);
-   status = (*cl->cl_datatype_deref) (type);
-
-   (void) _SL_decrement_frame_pointer ();
-   return status;
-}
-
-static int datatype_push (unsigned char type_unused, VOID_STAR ptr)
-{
-   (void) type_unused;
-   return _SLang_push_datatype (*(int *) ptr);
-}
-
-int _SLang_pop_datatype (unsigned char *type)
-{
-   int i;
-
-   if (-1 == SLclass_pop_int_obj (SLANG_DATATYPE_TYPE, &i))
-     return -1;
-
-   *type = (unsigned char) i;
-   return 0;
-}
-
-static int datatype_pop (unsigned char type, VOID_STAR ptr)
-{
-   if (-1 == _SLang_pop_datatype (&type))
-     return -1;
-
-   *(int *) ptr = type;
-   return 0;
-}
-
-int _SLclass_init (void)
-{
-   SLang_Class_Type *cl;
-
-   /* First initialize the container classes.  This is so binary operations
-    * added later will work with them.
-    */
-   if (-1 == _SLarray_init_slarray ())
-     return -1;
-
-   /* DataType_Type */
-   if (NULL == (cl = SLclass_allocate_class ("DataType_Type")))
-     return -1;
-   cl->cl_pop = datatype_pop;
-   cl->cl_push = datatype_push;
-   cl->cl_dereference = datatype_deref;
-   if (-1 == SLclass_register_class (cl, SLANG_DATATYPE_TYPE, sizeof(int),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-
-   return 0;
-}
-
-static int register_new_datatype (char *name, unsigned char type)
-{
-   DataType_Ids [type] = type;
-   return SLadd_intrinsic_variable (name, (VOID_STAR) (DataType_Ids + type),
-				    SLANG_DATATYPE_TYPE, 1);
-}
-
-int SLclass_create_synonym (char *name, unsigned char type)
-{
-   if (NULL == _SLclass_get_class (type))
-     return -1;
-
-   return register_new_datatype (name, type);
-}
-
-int _SLclass_copy_class (unsigned char to, unsigned char from)
-{
-   SLang_Class_Type *cl = _SLclass_get_class (from);
-
-   if (Registered_Types[to] != NULL)
-     SLang_exit_error ("Application error: Class already exists");
-
-   Registered_Types[to] = cl;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (to != SLANG_UNDEFINED_TYPE)
-     _SLclass_Class_Type [to] = cl->cl_class_type;
-#endif
-   return 0;
-}
-
-int SLclass_register_class (SLang_Class_Type *cl, unsigned char type, unsigned int type_size, unsigned char class_type)
-{
-   char *name;
-   unsigned int i;
-   int can_binop = 1;		       /* scalar_vector_bin_op should work
-					* for all data types.
-					*/
-
-   if (type == SLANG_VOID_TYPE) for (i = 0; i < 256; i++)
-     {
-	if ((Registered_Types[i] == NULL)
-	    && (i != SLANG_VOID_TYPE))
-	  {
-	     type = (unsigned char) i;
-	     break;
-	  }
-     }
-
-   if ((NULL != Registered_Types [type])
-       || (type == SLANG_VOID_TYPE))
-     {
-	SLang_verror (SL_APPLICATION_ERROR, "Class type %d already in use", (int) type);
-	return -1;
-     }
-
-   cl->cl_data_type = type;
-   cl->cl_class_type = class_type;
-   name = cl->cl_name;
-
-   switch (class_type)
-     {
-      case SLANG_CLASS_TYPE_MMT:
-	if (cl->cl_push == NULL) cl->cl_push = default_push_mmt;
-	if (cl->cl_destroy == NULL)
-	  return method_undefined_error (type, "destroy", name);
-	cl->cl_user_destroy_fun = cl->cl_destroy;
-	cl->cl_destroy = default_destroy_user;
-	type_size = sizeof (VOID_STAR);
-	break;
-
-      case SLANG_CLASS_TYPE_SCALAR:
-	if (cl->cl_destroy == NULL) cl->cl_destroy = default_destroy_simple;
-	if ((type_size == 0)
-	    || (type_size > sizeof (_SL_Object_Union_Type)))
-	  {
-	     SLang_verror (SL_INVALID_PARM,
-			   "Type size for %s not appropriate for SCALAR type",
-			   name);
-	     return -1;
-	  }
-	if (cl->cl_pop == NULL)
-	  return method_undefined_error (type, "pop", name);
-	if (cl->cl_fread == NULL) cl->cl_fread = scalar_fread;
-	if (cl->cl_fwrite == NULL) cl->cl_fwrite = scalar_fwrite;
-
-	can_binop = 1;
-	break;
-
-      case SLANG_CLASS_TYPE_PTR:
-	if (cl->cl_destroy == NULL)
-	  return method_undefined_error (type, "destroy", name);
-	type_size = sizeof (VOID_STAR);
-	break;
-
-      case SLANG_CLASS_TYPE_VECTOR:
-	if (cl->cl_destroy == NULL)
-	  return method_undefined_error (type, "destroy", name);
-	if (cl->cl_pop == NULL)
-	  return method_undefined_error (type, "pop", name);
-	cl->cl_apop = vector_apop;
-	cl->cl_apush = vector_apush;
-	cl->cl_adestroy = default_destroy_simple;
-	if (cl->cl_fread == NULL) cl->cl_fread = scalar_fread;
-	if (cl->cl_fwrite == NULL) cl->cl_fwrite = scalar_fwrite;
-	can_binop = 1;
-	break;
-
-      default:
-	SLang_verror (SL_INVALID_PARM, "%s: unknown class type (%d)", name, class_type);
-	return -1;
-     }
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if (type != SLANG_UNDEFINED_TYPE)
-     _SLclass_Class_Type [type] = class_type;
-#endif
-
-   if (type_size == 0)
-     {
-	SLang_verror (SL_INVALID_PARM, "type size must be non-zero for %s", name);
-	return -1;
-     }
-
-   if (cl->cl_string == NULL) cl->cl_string = default_string;
-   if (cl->cl_acopy == NULL) cl->cl_acopy = default_acopy;
-   if (cl->cl_datatype_deref == NULL) cl->cl_datatype_deref = default_datatype_deref;
-
-   if (cl->cl_pop == NULL) cl->cl_pop = default_pop;
-
-   if (cl->cl_push == NULL)
-     return method_undefined_error (type, "push", name);
-
-   if (cl->cl_byte_code_destroy == NULL)
-     cl->cl_byte_code_destroy = cl->cl_destroy;
-   if (cl->cl_push_literal == NULL)
-     cl->cl_push_literal = cl->cl_push;
-
-   if (cl->cl_dereference == NULL)
-     cl->cl_dereference = default_dereference_object;
-
-   if (cl->cl_apop == NULL) cl->cl_apop = cl->cl_pop;
-   if (cl->cl_apush == NULL) cl->cl_apush = cl->cl_push;
-   if (cl->cl_adestroy == NULL) cl->cl_adestroy = cl->cl_destroy;
-   if (cl->cl_push_intrinsic == NULL) cl->cl_push_intrinsic = cl->cl_push;
-
-   if ((cl->cl_foreach == NULL)
-       || (cl->cl_foreach_open == NULL)
-       || (cl->cl_foreach_close == NULL))
-     {
-	cl->cl_foreach = _SLarray_cl_foreach;
-	cl->cl_foreach_open = _SLarray_cl_foreach_open;
-	cl->cl_foreach_close = _SLarray_cl_foreach_close;
-     }
-
-   cl->cl_sizeof_type = type_size;
-
-   if (NULL == (cl->cl_transfer_buf = (VOID_STAR) SLmalloc (type_size)))
-     return -1;
-
-   Registered_Types[type] = cl;
-
-   if (-1 == register_new_datatype (name, type))
-     return -1;
-
-   if (cl->cl_cmp != NULL)
-     {
-	if (-1 == SLclass_add_binary_op (type, type, use_cmp_bin_op, use_cmp_bin_op_result))
-	  return -1;
-     }
-   else if (can_binop
-	    && (-1 == SLclass_add_binary_op (type, type, scalar_vector_bin_op, scalar_vector_bin_op_result)))
-     return -1;
-
-   cl->cl_anytype_typecast = _SLanytype_typecast;
-
-   return 0;
-}
-
-int SLclass_add_math_op (unsigned char type,
-			 int (*handler)(int,
-					unsigned char, VOID_STAR, unsigned int,
-					VOID_STAR),
-			 int (*result) (int, unsigned char, unsigned char *))
-{
-   SLang_Class_Type *cl = _SLclass_get_class (type);
-
-   cl->cl_math_op = handler;
-   cl->cl_math_op_result_type = result;
-   return 0;
-}
-
-int SLclass_add_binary_op (unsigned char a, unsigned char b,
-			   int (*f) (int,
-				     unsigned char, VOID_STAR, unsigned int,
-				     unsigned char, VOID_STAR, unsigned int,
-				     VOID_STAR),
-			   int (*r) (int, unsigned char, unsigned char, unsigned char *))
-{
-   SLang_Class_Type *cl;
-   SL_OOBinary_Type *ab;
-
-   if ((f == NULL) || (r == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "SLclass_add_binary_op");
-	return -1;
-     }
-
-   cl = _SLclass_get_class (a);
-   (void) _SLclass_get_class (b);
-
-   if (NULL == (ab = (SL_OOBinary_Type *) SLmalloc (sizeof(SL_OOBinary_Type))))
-     return -1;
-
-   ab->data_type = b;
-   ab->binary_function = f;
-   ab->binary_result = r;
-   ab->next = cl->cl_binary_ops;
-   cl->cl_binary_ops = ab;
-
-   if ((a != SLANG_ARRAY_TYPE)
-       && (b != SLANG_ARRAY_TYPE))
-     {
-	if ((-1 == _SLarray_add_bin_op (a))
-	    || (-1 == _SLarray_add_bin_op (b)))
-	  return -1;
-     }
-
-   return 0;
-}
-
-int SLclass_add_unary_op (unsigned char type,
-			  int (*f)(int,
-				   unsigned char, VOID_STAR, unsigned int,
-				   VOID_STAR),
-			  int (*r)(int, unsigned char, unsigned char *))
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   if ((f == NULL) || (r == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "SLclass_add_unary_op");
-	return -1;
-     }
-
-   cl->cl_unary_op = f;
-   cl->cl_unary_op_result_type = r;
-
-   return 0;
-}
-
-int SLclass_add_app_unary_op (unsigned char type,
-			      int (*f)(int,
-				       unsigned char, VOID_STAR, unsigned int,
-				       VOID_STAR),
-			      int (*r)(int, unsigned char, unsigned char *))
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   if ((f == NULL) || (r == NULL))
-     {
-	SLang_verror (SL_INVALID_PARM, "SLclass_add_app_unary_op");
-	return -1;
-     }
-
-   cl->cl_app_unary_op = f;
-   cl->cl_app_unary_op_result_type = r;
-
-   return 0;
-}
-
-int SLclass_set_pop_function (SLang_Class_Type *cl, int (*f)(unsigned char, VOID_STAR))
-{
-   if (cl == NULL) return -1;
-   cl->cl_pop = f;
-
-   return 0;
-}
-
-int SLclass_set_push_function (SLang_Class_Type *cl, int (*f)(unsigned char, VOID_STAR))
-{
-   if (cl == NULL) return -1;
-   cl->cl_push = f;
-
-   return 0;
-}
-
-int SLclass_set_string_function (SLang_Class_Type *cl, char *(*f)(unsigned char, VOID_STAR))
-{
-   if (cl == NULL) return -1;
-
-   cl->cl_string = f;
-   return 0;
-}
-
-int SLclass_set_destroy_function (SLang_Class_Type *cl, void (*f)(unsigned char, VOID_STAR))
-{
-   if (cl == NULL) return -1;
-
-   cl->cl_destroy = f;
-   return 0;
-}
-
-int SLclass_set_sget_function (SLang_Class_Type *cl, int (*f)(unsigned char, char *))
-{
-   if (cl == NULL) return -1;
-   cl->cl_sget = f;
-   return 0;
-}
-
-int SLclass_set_sput_function (SLang_Class_Type *cl, int (*f)(unsigned char, char *))
-{
-   if (cl == NULL) return -1;
-   cl->cl_sput = f;
-   return 0;
-}
-
-int SLclass_set_aget_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
-   if (cl == NULL) return -1;
-   cl->cl_aget = f;
-   return 0;
-}
-
-int SLclass_set_aput_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
-   if (cl == NULL) return -1;
-   cl->cl_aput = f;
-   return 0;
-}
-
-int SLclass_set_anew_function (SLang_Class_Type *cl, int (*f)(unsigned char, unsigned int))
-{
-   if (cl == NULL) return -1;
-   cl->cl_anew = f;
-   return 0;
-}
-
-/* Misc */
-void _SLclass_type_mismatch_error (unsigned char a, unsigned char b)
-{
-   SLang_verror (SL_TYPE_MISMATCH, "Expecting %s, found %s",
-		 SLclass_get_datatype_name (a),
-		 SLclass_get_datatype_name (b));
-}
-
-/* */
-
-static int null_binary_fun (int op,
-			    unsigned char a, VOID_STAR ap, unsigned int na,
-			    unsigned char b, VOID_STAR bp, unsigned int nb,
-			    VOID_STAR cp)
-{
-   int *ic;
-   unsigned int i;
-   int c;
-
-   (void) ap; (void) bp;
-
-   switch (op)
-     {
-      case SLANG_EQ:
-	c = (a == b);
-	break;
-
-      case SLANG_NE:
-	c = (a != b);
-	break;
-
-      default:
-	return 0;
-     }
-
-   if (na > nb) nb = na;
-   ic = (int *) cp;
-   for (i = 0; i < nb; i++)
-     ic[i] = c;
-
-   return 1;
-}
-
-static char *get_binary_op_string (int op)
-{
-   static char *ops[SLANG_MOD] =
-     {
-	"+", "=", "*", "/", "==", "!=", ">", ">=", "<", "<=", "^",
-	"or", "and", "&", "|", "xor", "shl", "shr", "mod"
-     };
-
-   if ((op > SLANG_MOD) || (op <= 0))
-     return "??";
-   return ops[op - 1];
-}
-
-int (*_SLclass_get_binary_fun (int op,
-			       SLang_Class_Type *a_cl, SLang_Class_Type *b_cl,
-			       SLang_Class_Type **c_cl, int do_error))
-(int,
- unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR, unsigned int,
- VOID_STAR)
-{
-   SL_OOBinary_Type *bt;
-   unsigned char a, b, c;
-
-   a = a_cl->cl_data_type;
-   b = b_cl->cl_data_type;
-
-   if ((a == SLANG_NULL_TYPE) || (b == SLANG_NULL_TYPE))
-     {
-	*c_cl = _SLclass_get_class (SLANG_INT_TYPE);
-	return null_binary_fun;
-     }
-
-   bt = a_cl->cl_binary_ops;
-
-   while (bt != NULL)
-     {
-	if (bt->data_type == b)
-	  {
-	     if (1 != (*bt->binary_result)(op, a, b, &c))
-	       break;
-
-	     if (c == a) *c_cl = a_cl;
-	     else if (c == b) *c_cl = b_cl;
-	     else *c_cl = _SLclass_get_class (c);
-
-	     return bt->binary_function;
-	  }
-
-	bt = bt->next;
-     }
-
-   if (do_error)
-     SLang_verror (SL_TYPE_MISMATCH, "%s %s %s is not possible",
-		   a_cl->cl_name, get_binary_op_string (op), b_cl->cl_name);
-
-   *c_cl = NULL;
-   return NULL;
-}
-
-int (*_SLclass_get_unary_fun (int op,
-			      SLang_Class_Type *a_cl,
-			      SLang_Class_Type **b_cl,
-			      int utype))
-(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR)
-{
-   int (*f)(int, unsigned char, VOID_STAR, unsigned int, VOID_STAR);
-   int (*r)(int, unsigned char, unsigned char *);
-   unsigned char a;
-   unsigned char b;
-
-   switch (utype)
-     {
-      case _SLANG_BC_UNARY:
-	f = a_cl->cl_unary_op;
-	r = a_cl->cl_unary_op_result_type;
-	break;
-
-      case _SLANG_BC_MATH_UNARY:
-	f = a_cl->cl_math_op;
-	r = a_cl->cl_math_op_result_type;
-	break;
-
-      case _SLANG_BC_APP_UNARY:
-	f = a_cl->cl_app_unary_op;
-	r = a_cl->cl_app_unary_op_result_type;
-	break;
-
-      default:
-	f = NULL;
-	r = NULL;
-     }
-
-   a = a_cl->cl_data_type;
-   if ((f != NULL) && (r != NULL) && (1 == (*r) (op, a, &b)))
-     {
-	if (a == b)
-	  *b_cl = a_cl;
-	else
-	  *b_cl = _SLclass_get_class (b);
-	return f;
-     }
-
-   SLang_verror (SL_TYPE_MISMATCH, "undefined unary operation/function on %s",
-		 a_cl->cl_name);
-
-   *b_cl = NULL;
-
-   return NULL;
-}
-
-int
-SLclass_typecast (unsigned char to_type, int is_implicit, int allow_array)
-{
-   unsigned char from_type;
-   SLang_Class_Type *cl_to, *cl_from;
-   SLang_Object_Type obj;
-   VOID_STAR ap;
-   VOID_STAR bp;
-   int status;
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   from_type = obj.data_type;
-   if (from_type == to_type)
-     {
-	SLang_push (&obj);
-	return 0;
-     }
-
-   cl_from = _SLclass_get_class (from_type);
-   
-   /* Since the typecast functions are designed to work on arrays, 
-    * get the pointer to the value instead of just &obj.v.
-    */
-   ap = _SLclass_get_ptr_to_value (cl_from, &obj);
-
-   if ((from_type == SLANG_ARRAY_TYPE)
-       && (allow_array || (to_type != SLANG_ANY_TYPE)))
-     {
-	if (allow_array == 0)
-	  goto return_error;
-
-	cl_to = _SLclass_get_class (SLANG_ARRAY_TYPE);
-	bp = cl_to->cl_transfer_buf;
-	status = _SLarray_typecast (from_type, ap, 1, to_type, bp, is_implicit);
-     }
-   else
-     {
-	int (*t) (unsigned char, VOID_STAR, unsigned int, unsigned char, VOID_STAR);
-
-	if (NULL == (t = _SLclass_get_typecast (from_type, to_type, is_implicit)))
-	  {
-	     SLang_free_object (&obj);
-	     return -1;
-	  }
-
-	cl_to = _SLclass_get_class (to_type);
-	bp = cl_to->cl_transfer_buf;
-	status = (*t) (from_type, ap, 1, to_type, bp);
-     }
-
-   if (1 == status)
-     {
-	if (-1 == (*cl_to->cl_apush)(to_type, bp))
-	  {
-	     (*cl_to->cl_adestroy) (to_type, bp);
-	     SLang_free_object (&obj);
-	     return -1;
-	  }
-
-	/* cl_apush will push a copy, so destry this one */
-	(*cl_to->cl_adestroy) (to_type, bp);
-	SLang_free_object (&obj);
-	return 0;
-     }
-
-   return_error:
-
-   SLang_verror (SL_TYPE_MISMATCH, "Unable to typecast %s to %s",
-		 cl_from->cl_name,
-		 SLclass_get_datatype_name (to_type));
-   SLang_free_object (&obj);
-   return -1;
-}
-
-int (*_SLclass_get_typecast (unsigned char from, unsigned char to, int is_implicit))
-(unsigned char, VOID_STAR, unsigned int,
- unsigned char, VOID_STAR)
-{
-   SL_Typecast_Type *t;
-   SLang_Class_Type *cl_from;
-
-   cl_from = _SLclass_get_class (from);
-
-   t = cl_from->cl_typecast_funs;
-   while (t != NULL)
-     {
-	if (t->data_type != to)
-	  {
-	     t = t->next;
-	     continue;
-	  }
-
-	if (is_implicit && (t->allow_implicit == 0))
-	  break;
-
-	return t->typecast;
-     }
-
-   if (to == SLANG_ANY_TYPE)
-     return _SLanytype_typecast;
-
-   if ((is_implicit == 0)
-       && (cl_from->cl_void_typecast != NULL))
-     return cl_from->cl_void_typecast;
-
-   SLang_verror (SL_TYPE_MISMATCH, "Unable to typecast %s to %s",
-		 cl_from->cl_name,
-		 SLclass_get_datatype_name (to));
-
-   return NULL;
-}
-
-int
-SLclass_add_typecast (unsigned char from, unsigned char to,
-		      int (*f)_PROTO((unsigned char, VOID_STAR, unsigned int,
-				      unsigned char, VOID_STAR)),
-		      int allow_implicit)
-{
-   SL_Typecast_Type *t;
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (from);
-   if (to == SLANG_VOID_TYPE)
-     {
-	cl->cl_void_typecast = f;
-	return 0;
-     }
-
-   (void) _SLclass_get_class (to);
-
-   if (NULL == (t = (SL_Typecast_Type *) SLmalloc (sizeof (SL_Typecast_Type))))
-     return -1;
-
-   SLMEMSET((char *) t, 0, sizeof(SL_Typecast_Type));
-   t->data_type = to;
-   t->next = cl->cl_typecast_funs;
-   t->typecast = f;
-   t->allow_implicit = allow_implicit;
-
-   cl->cl_typecast_funs = t;
-
-   return 0;
-}
-
-SLang_MMT_Type *SLang_pop_mmt (unsigned char type) /*{{{*/
-{
-   SLang_MMT_Type *mmt;
-
-   if (-1 == SLclass_pop_ptr_obj (type, (VOID_STAR *) &mmt))
-     mmt = NULL;
-   return mmt;
-
-#if 0
-   SLang_Object_Type obj;
-   SLang_Class_Type *cl;
-
-   if (_SLang_pop_object_of_type (type, &obj))
-     return NULL;
-
-   cl = _SLclass_get_class (type);
-   if ((cl->cl_class_type == SLANG_CLASS_TYPE_MMT)
-       && (obj.data_type == type))
-     {
-	return obj.v.ref;
-     }
-
-   _SLclass_type_mismatch_error (type, obj.data_type);
-   SLang_free_object (&obj);
-   return NULL;
-#endif
-}
-
-/*}}}*/
-
-int SLang_push_mmt (SLang_MMT_Type *ref) /*{{{*/
-{
-   if (ref == NULL)
-     return SLang_push_null ();
-
-   ref->count += 1;
-
-   if (0 == SLclass_push_ptr_obj (ref->data_type, (VOID_STAR) ref))
-     return 0;
-
-   ref->count -= 1;
-   return -1;
-}
-
-/*}}}*/
-
-void SLang_inc_mmt (SLang_MMT_Type *ref)
-{
-   if (ref != NULL)
-     ref->count += 1;
-}
-
-VOID_STAR SLang_object_from_mmt (SLang_MMT_Type *ref)
-{
-   if (ref == NULL)
-     return NULL;
-
-   return ref->user_data;
-}
-
-SLang_MMT_Type *SLang_create_mmt (unsigned char t, VOID_STAR p)
-{
-   SLang_MMT_Type *ref;
-
-   (void) _SLclass_get_class (t);      /* check to see if it is registered */
-
-   if (NULL == (ref = (SLang_MMT_Type *) SLmalloc (sizeof (SLang_MMT_Type))))
-     return NULL;
-
-   SLMEMSET ((char *) ref, 0, sizeof (SLang_MMT_Type));
-
-   ref->data_type = t;
-   ref->user_data = p;
-   /* FIXME!!  To be consistent with other types, the reference count should 
-    * be set to 1 here.  However, doing so will require other code changes
-    * involving the use of MMTs.  For instance, SLang_free_mmt would have
-    * to be called after every push of the MMT.
-    */
-   return ref;
-}
-
-void SLang_free_mmt (SLang_MMT_Type *ref)
-{
-   unsigned char type;
-   SLang_Class_Type *cl;
-
-   if (ref == NULL)
-     return;
-
-   /* This can be zero if SLang_create_mmt is called followed
-    * by this routine before anything gets a chance to attach itself
-    * to it.
-    */
-   if (ref->count > 1)
-     {
-	ref->count -= 1;
-	return;
-     }
-
-   type = ref->data_type;
-   cl = _SLclass_get_class (type);
-   (*cl->cl_user_destroy_fun) (type, ref->user_data);
-   SLfree ((char *)ref);
-}
-
-int SLang_push_value (unsigned char type, VOID_STAR v)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   return (*cl->cl_apush)(type, v);
-}
-
-int SLang_pop_value (unsigned char type, VOID_STAR v)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   return (*cl->cl_apop)(type, v);
-}
-
-void SLang_free_value (unsigned char type, VOID_STAR v)
-{
-   SLang_Class_Type *cl;
-
-   cl = _SLclass_get_class (type);
-   (*cl->cl_adestroy) (type, v);
-}
-
-/* These routines are very low-level and are designed for application data
- * types to access the stack from their push/pop methods.  The int and
- * pointer versions are in slang.c
- */
-#if SLANG_HAS_FLOAT
-int SLclass_push_double_obj (unsigned char type, double x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.double_val = x;
-   return SLang_push (&obj);
-}
-int SLclass_push_float_obj (unsigned char type, float x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.float_val = x;
-   return SLang_push (&obj);
-}
-
-#endif
-
-int SLclass_push_long_obj (unsigned char type, long x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.long_val = x;
-   return SLang_push (&obj);
-}
-
-int SLclass_push_short_obj (unsigned char type, short x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.short_val = x;
-   return SLang_push (&obj);
-}
-
-int SLclass_push_char_obj (unsigned char type, char x)
-{
-   SLang_Object_Type obj;
-   obj.data_type = type;
-   obj.v.char_val = x;
-   return SLang_push (&obj);
-}
-
-#if SLANG_HAS_FLOAT
-int SLclass_pop_double_obj (unsigned char type, double *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.double_val;
-   return 0;
-}
-
-int SLclass_pop_float_obj (unsigned char type, float *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.float_val;
-   return 0;
-}
-#endif
-
-int SLclass_pop_long_obj (unsigned char type, long *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.long_val;
-   return 0;
-}
-
-int SLclass_pop_int_obj (unsigned char type, int *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.int_val;
-   return 0;
-}
-
-int SLclass_pop_short_obj (unsigned char type, short *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.short_val;
-   return 0;
-}
-
-int SLclass_pop_char_obj (unsigned char type, char *x)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     return -1;
-
-   *x = obj.v.char_val;
-   return 0;
-}
-
-int SLclass_pop_ptr_obj (unsigned char type, VOID_STAR *s)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == _SLang_pop_object_of_type (type, &obj, 0))
-     {
-	*s = (VOID_STAR) NULL;
-	return -1;
-     }
-   *s = obj.v.ptr_val;
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slcmd.c b/mdk-stage1/slang/slcmd.c
deleted file mode 100644
index 4a00a90fc..000000000
--- a/mdk-stage1/slang/slcmd.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/* cmd line facility for slang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifndef HAVE_STDLIB_H
-/* Oh dear.  Where is the prototype for atof?  If not in stdlib, then
- * I do not know where.  Not in math.h onsome systems either.
- */
-extern double atof ();
-#endif
-
-static SLcmd_Cmd_Type *SLcmd_find_command (char *s, SLcmd_Cmd_Type *cmd)
-{
-   char *cmdstr;
-   char chs = *s++, ch;
-
-   while ((cmd->cmdfun != NULL)
-	  && (NULL != (cmdstr = cmd->cmd))
-	  && (0 != (ch = *cmdstr++)))
-     {
-	if ((ch == chs) && !strcmp (s, cmdstr)) return cmd;
-	cmd++;
-     }
-   return NULL;
-}
-
-static int extract_token (char **strptr, char *buf)
-{
-   char *s, *b;
-   char ch, quote;
-
-   *buf = 0;
-
-   s = *strptr;
-   while (((ch = *s) != 0)
-	  && ((ch == ' ') || (ch == '\t') || (ch == '\n')))
-     s++;
-
-   *strptr = s;
-
-   if (ch == 0) return 0;
-   if (ch == '%') return 0;
-
-   b = buf;
-
-   *b++ = ch;
-   s++;
-
-   if ((ch == '\'') || (ch == '"'))
-     {
-	quote = ch;
-	while ((ch = *s) != 0)
-	  {
-	     s++;
-	     *b++ = ch;
-	     if (ch == quote)
-	       break;
-
-	     if (ch == '\\')
-	       {
-		  if (0 == (ch = *s))
-		    break;
-		  *b++ = ch;
-		  s++;
-	       }
-	  }
-	*strptr = s;
-	*b = 0;
-	return 1;
-     }
-
-   while (((ch = *s) != 0)
-	  && (ch != ' ')
-	  && (ch != '\t')
-	  && (ch != '\n')
-	  && (ch != '%'))
-     *b++ = *s++;
-
-   *strptr = s;
-   *b = 0;
-   return 1;
-}
-
-static int allocate_arg_space (SLcmd_Cmd_Table_Type *table, int argc, unsigned int *space_ptr)
-{
-   unsigned int space = *space_ptr;
-   char *p;
-
-   if (argc + 1 < (int) space)
-     return 0;
-
-   if (space > 128)
-     {
-	if (space > 1024) space += 1024;
-	else space += 128;
-     }
-   else space += 32;
-
-   if (NULL == (p = SLrealloc ((char *)table->string_args, space * sizeof (char *))))
-     return -1;
-   table->string_args = (char **)p;
-   table->string_args [argc] = NULL;
-
-   if (NULL == (p = SLrealloc ((char *)table->int_args, space * sizeof (int))))
-     return -1;
-   table->int_args = (int *)p;
-
-   if (NULL == (p = SLrealloc ((char *)table->double_args, space * sizeof (double))))
-     return -1;
-   table->double_args = (double *)p;
-
-   if (NULL == (p = SLrealloc ((char *)table->arg_type, space * sizeof (unsigned char))))
-     return -1;
-   table->arg_type = (unsigned char *)p;
-
-   *space_ptr = space;
-   return 0;
-}
-
-int SLcmd_execute_string (char *str, SLcmd_Cmd_Table_Type *table)
-{
-   char *s, *b = NULL, *arg_type, *last_str, *cmd_name;
-   SLcmd_Cmd_Type *cmd;
-   char *buf;
-   int token_present;
-   int i;
-   int status;
-   unsigned int len;
-   int argc;
-   unsigned int space;
-
-   table->argc = 0;
-   table->string_args = NULL;
-   table->int_args = NULL;
-   table->double_args = NULL;
-   table->arg_type = NULL;
-
-   buf = SLmake_string (str);
-   if (buf == NULL)
-     return -1;
-
-   status = extract_token (&str, buf);
-   if (status <= 0)
-     {
-	SLfree (buf);
-	return status;
-     }
-
-   if (((len = strlen (buf)) >= 32)
-       || (NULL == (cmd = SLcmd_find_command (buf, table->table))))
-     {
-	SLang_verror (SL_UNDEFINED_NAME,"%s: invalid command", buf);
-	SLfree (buf);
-	return -1;
-     }
-
-   if (NULL == (cmd_name = SLmake_string (buf)))
-     {
-	SLfree (buf);
-	return -1;
-     }
-
-   space = 0;
-   argc = 0;
-   if (-1 == allocate_arg_space (table, argc, &space))
-     {
-	SLfree (buf);
-	return -1;
-     }
-   table->arg_type[argc] = SLANG_STRING_TYPE;
-   table->string_args[argc++] = cmd_name;
-
-   arg_type = cmd->arg_type;
-   status = -1;
-   while (*arg_type)
-     {
-	int guess_type = 0;
-
-	last_str = str;
-
-	if (-1 == allocate_arg_space (table, argc, &space))
-	  goto error;
-
-	if (-1 == (token_present = extract_token (&str, buf)))
-	  goto error;
-
-	table->string_args[argc] = NULL;
-
-	if (token_present)
-	  {
-	     b = buf;
-	     len = strlen (b);
-
-	     if ((*b == '"') && (len > 1))
-	       {
-		  b++;
-		  len -= 2;
-		  b[len] = 0;
-		  guess_type = SLANG_STRING_TYPE;
-		  SLexpand_escaped_string (buf, b, b + len);
-		  len = strlen (buf);
-	       }
-	     else if ((*b == '\'') && (len > 1))
-	       {
-		  char ch;
-		  b++;
-		  len -= 2;
-		  b[len] = 0;
-		  guess_type = SLANG_INT_TYPE;
-		  ch = *b;
-		  if (ch == '\\')
-		    (void) _SLexpand_escaped_char (b, &ch);
-		  sprintf (buf, "%d", (unsigned char) ch);
-		  len = strlen (buf);
-	       }
-	     else guess_type = SLang_guess_type (buf);
-	  }
-
-	switch (*arg_type++)
-	  {
-	     /* variable argument number */
-	   case 'v':
-	     if (token_present == 0) break;
-	   case 'V':
-	     if (token_present == 0)
-	       {
-		  SLang_verror (SL_INVALID_PARM, "%s: Expecting argument", cmd_name);
-		  goto error;
-	       }
-
-	     while (*last_str == ' ') last_str++;
-	     len = strlen (last_str);
-	     str = last_str + len;
-
-	     s = SLmake_nstring (last_str, len);
-	     if (s == NULL) goto error;
-
-	     table->arg_type[argc] = SLANG_STRING_TYPE;
-	     table->string_args[argc++] = s;
-	     break;
-
-	   case 's':
-	     if (token_present == 0) break;
-	   case 'S':
-	     if (token_present == 0)
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting string argument", cmd_name);
-		  goto error;
-	       }
-
-	     s = SLmake_nstring (buf, len);
-	     if (s == NULL) goto error;
-	     table->arg_type[argc] = SLANG_STRING_TYPE;
-	     table->string_args[argc++] = s;
-	     break;
-
-	     /* integer argument */
-	   case 'i':
-	     if (token_present == 0) break;
-	   case 'I':
-	     if ((token_present == 0) || (SLANG_INT_TYPE != guess_type))
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting integer argument", cmd_name);
-		  goto error;
-	       }
-
-	     table->arg_type[argc] = SLANG_INT_TYPE;
-	     table->int_args[argc++] = SLatoi((unsigned char *) buf);
-	     break;
-
-	     /* floating point arg */
-#if SLANG_HAS_FLOAT
-	   case 'f':
-	     if (token_present == 0) break;
-	   case 'F':
-	     if ((token_present == 0) || (SLANG_STRING_TYPE == guess_type))
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting double argument", cmd_name);
-		  goto error;
-	       }
-	     table->arg_type[argc] = SLANG_DOUBLE_TYPE;
-	     table->double_args[argc++] = atof(buf);
-	     break;
-#endif
-	     /* Generic type */
-	   case 'g':
-	     if (token_present == 0) break;
-	   case 'G':
-	     if (token_present == 0)
-	       {
-		  SLang_verror (SL_TYPE_MISMATCH, "%s: Expecting argument", cmd_name);
-		  goto error;
-	       }
-
-	     switch (guess_type)
-	       {
-		case SLANG_INT_TYPE:
-		  table->arg_type[argc] = SLANG_INT_TYPE;
-		  table->int_args[argc++] = SLatoi((unsigned char *) buf);
-		  break;
-
-		case SLANG_STRING_TYPE:
-		  s = SLmake_nstring (buf, len);
-		  if (s == NULL) goto error;
-
-		  table->arg_type[argc] = SLANG_STRING_TYPE;
-		  table->string_args[argc++] = s;
-		  break;
-#if SLANG_HAS_FLOAT
-		case SLANG_DOUBLE_TYPE:
-		  table->arg_type[argc] = SLANG_DOUBLE_TYPE;
-		  table->double_args[argc++] = atof(buf);
-#endif
-	       }
-	     break;
-	  }
-     }
-
-   /*                 call function */
-   status = (*cmd->cmdfun)(argc, table);
-
-   error:
-   if (table->string_args != NULL) for (i = 0; i < argc; i++)
-     {
-	if (NULL != table->string_args[i])
-	  {
-	     SLfree (table->string_args[i]);
-	     table->string_args[i] = NULL;
-	  }
-     }
-   SLfree ((char *)table->string_args); table->string_args = NULL;
-   SLfree ((char *)table->double_args); table->double_args = NULL;
-   SLfree ((char *)table->int_args); table->int_args = NULL;
-   SLfree ((char *)table->arg_type); table->arg_type = NULL;
-
-   SLfree (buf);
-   return status;
-}
-
diff --git a/mdk-stage1/slang/slcmplex.c b/mdk-stage1/slang/slcmplex.c
deleted file mode 100644
index b210dfc04..000000000
--- a/mdk-stage1/slang/slcmplex.c
+++ /dev/null
@@ -1,1142 +0,0 @@
-/* Complex Data Type definition for S-Lang */
-/* Copyright (c) 1997, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* The rest of the file is enclosed in this #if */
-#if SLANG_HAS_COMPLEX
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#ifdef PI
-# undef PI
-#endif
-#define PI 3.14159265358979323846
-
-int SLang_pop_complex (double *r, double *i)
-{
-   double *c;
-
-   switch (SLang_peek_at_stack ())
-     {
-      case SLANG_COMPLEX_TYPE:
-	if (-1 == SLclass_pop_ptr_obj (SLANG_COMPLEX_TYPE, (VOID_STAR *)&c))
-	  return -1;
-	*r = c[0];
-	*i = c[1];
-	SLfree ((char *) c);
-	break;
-
-      default:
-	*i = 0.0;
-	if (-1 == SLang_pop_double (r, NULL, NULL))
-	  return -1;
-	break;
-
-      case -1:
-	return -1;
-     }
-   return 0;
-}
-
-int SLang_push_complex (double r, double i)
-{
-   double *c;
-
-   c = (double *) SLmalloc (2 * sizeof (double));
-   if (c == NULL)
-     return -1;
-
-   c[0] = r;
-   c[1] = i;
-
-   if (-1 == SLclass_push_ptr_obj (SLANG_COMPLEX_TYPE, (VOID_STAR) c))
-     {
-	SLfree ((char *) c);
-	return -1;
-     }
-   return 0;
-}
-
-double *SLcomplex_times (double *c, double *a, double *b)
-{
-   double a_real, b_real, a_imag, b_imag;
-
-   a_real = a[0];
-   b_real = b[0];
-   a_imag = a[1];
-   b_imag = b[1];
-
-   c[0] = a_real * b_real - a_imag * b_imag;
-   c[1] = a_imag * b_real + a_real * b_imag;
-
-   return c;
-}
-
-double *SLcomplex_divide (double *c, double *a, double *b)
-{
-   double a_real, b_real, a_imag, b_imag;
-   double ratio, invden;
-
-   a_real = a[0];
-   b_real = b[0];
-   a_imag = a[1];
-   b_imag = b[1];
-
-   /* Do it this way to avoid overflow in the denom */
-   if (fabs(b_real) > fabs(b_imag))
-     {
-	ratio = b_imag / b_real;
-	invden = 1.0 / (b_real + b_imag * ratio);
-	c[0] = (a_real + ratio * a_imag) * invden;
-	c[1] = (a_imag - a_real * ratio) * invden;
-     }
-   else
-     {
-	ratio = b_real / b_imag;
-	invden = 1.0 / (b_real * ratio + b_imag);
-	c[0] = (a_real * ratio + a_imag) * invden;
-	c[1] = (a_imag * ratio - a_real) * invden;
-     }
-   return c;
-}
-
-/* a^b = exp (b log a); */
-double *SLcomplex_pow (double *c, double *a, double *b)
-{
-   return SLcomplex_exp (c, SLcomplex_times (c, b, SLcomplex_log (c, a)));
-}
-
-static double *complex_dpow (double *c, double *a, double b)
-{
-   SLcomplex_log (c, a);
-   c[0] *= b;
-   c[1] *= b;
-   return SLcomplex_exp (c, c);
-}
-
-static double *dcomplex_pow (double *c, double a, double *b)
-{
-   a = log (a);
-   c[0] = a * b[0];
-   c[1] = a * b[1];
-   return SLcomplex_exp (c, c);
-}
-
-double SLcomplex_abs (double *z)
-{
-   return SLmath_hypot (z[0], z[1]);
-}
-
-/* It appears that FORTRAN assumes that the branch cut for the log function
- * is along the -x axis.  So, use this for atan2:
- */
-static double my_atan2 (double y, double x)
-{
-   double val;
-
-   val = atan (y/x);
-
-   if (x >= 0)
-     return val;		       /* I, IV */
-
-   if (y <= 0)			       /* III */
-     return val - PI;
-
-   return PI + val;		       /* II */
-}
-
-static void polar_form (double *r, double *theta, double *z)
-{
-   double x, y;
-
-   *r = SLcomplex_abs (z);
-
-   x = z[0];
-   y = z[1];
-
-   if (x == 0.0)
-     {
-	if (y >= 0)
-	  *theta = 0.5 * PI;
-	else
-	  *theta = 1.5 * PI;
-     }
-   else *theta = my_atan2 (y, x);
-}
-
-double *SLcomplex_sin (double *sinz, double *z)
-{
-   double x, y;
-
-   x = z[0]; y = z[1];
-   sinz[0] = sin (x) * cosh (y);
-   sinz[1] = cos (x) * sinh (y);
-   return sinz;
-}
-
-double *SLcomplex_cos (double *cosz, double *z)
-{
-   double x, y;
-
-   x = z[0]; y = z[1];
-   cosz[0] = cos (x) * cosh (y);
-   cosz[1] = -sin (x) * sinh (y);
-   return cosz;
-}
-
-double *SLcomplex_exp (double *expz, double *z)
-{
-   double r, i;
-
-   r = exp (z[0]);
-   i = z[1];
-   expz[0] = r * cos (i);
-   expz[1] = r * sin (i);
-   return expz;
-}
-
-double *SLcomplex_log (double *logz, double *z)
-{
-   double r, theta;
-
-   polar_form (&r, &theta, z);	       /* log R.e^(ix) = log R + ix */
-   logz[0] = log(r);
-   logz[1] = theta;
-   return logz;
-}
-
-double *SLcomplex_log10 (double *log10z, double *z)
-{
-   double l10 = log (10.0);
-   (void) SLcomplex_log (log10z, z);
-   log10z[0] = log10z[0] / l10;
-   log10z[1] = log10z[1] / l10;
-   return log10z;
-}
-
-double *SLcomplex_sqrt (double *sqrtz, double *z)
-{
-   double r, x, y;
-
-   x = z[0];
-   y = z[1];
-
-   r = SLmath_hypot (x, y);
-
-   if (r == 0.0)
-     {
-	sqrtz [0] = sqrtz [1] = 0.0;
-	return sqrtz;
-     }
-
-   if (x >= 0.0)
-     {
-	x = sqrt (0.5 * (r + x));
-	y = 0.5 * y / x;
-     }
-   else
-     {
-	r = sqrt (0.5 * (r - x));
-	x = 0.5 * y / r;
-	y = r;
-
-	if (x < 0.0)
-	  {
-	     x = -x;
-	     y = -y;
-	  }
-     }
-
-   sqrtz[0] = x;
-   sqrtz[1] = y;
-
-   return sqrtz;
-}
-
-double *SLcomplex_tan (double *tanz, double *z)
-{
-   double x, y, invden;
-
-   x = 2 * z[0];
-   y = 2 * z[1];
-   invden = 1.0 / (cos (x) + cosh (y));
-   tanz[0] = invden * sin (x);
-   tanz[1] = invden * sinh (y);
-   return tanz;
-}
-
-/* Utility Function */
-static void compute_alpha_beta (double *z, double *alpha, double *beta)
-{
-   double x, y, a, b;
-
-   x = z[0];
-   y = z[1];
-   a = 0.5 * SLmath_hypot (x + 1, y);
-   b = 0.5 * SLmath_hypot (x - 1, y);
-
-   *alpha = a + b;
-   *beta = a - b;
-}
-
-double *SLcomplex_asin (double *asinz, double *z)
-{
-   double alpha, beta;
-
-   compute_alpha_beta (z, &alpha, &beta);
-   asinz[0] = asin (beta);
-   asinz[1] = log (alpha + sqrt (alpha * alpha - 1));
-   return asinz;
-}
-
-double *SLcomplex_acos (double *acosz, double *z)
-{
-   double alpha, beta;
-
-   compute_alpha_beta (z, &alpha, &beta);
-   acosz[0] = acos (beta);
-   acosz[1] = -log (alpha + sqrt (alpha * alpha - 1));
-   return acosz;
-}
-
-double *SLcomplex_atan (double *atanz, double *z)
-{
-   double x, y;
-   double z1[2], z2[2];
-
-   x = z[0]; y = z[1];
-   z1[0] = x;
-   z1[1] = 1 + y;
-   z2[0] = -x;
-   z2[1] = 1 - y;
-
-   SLcomplex_log (z1, SLcomplex_divide (z2, z1, z2));
-   atanz[0] = -0.5 * z1[1];
-   atanz[1] = 0.5 * z1[0];
-
-   return atanz;
-}
-
-double *SLcomplex_sinh (double *sinhz, double *z)
-{
-   double x, y;
-   x = z[0]; y = z[1];
-   sinhz[0] = sinh (x) * cos (y);
-   sinhz[1] = cosh (x) * sin (y);
-   return sinhz;
-}
-
-double *SLcomplex_cosh (double *coshz, double *z)
-{
-   double x, y;
-   x = z[0]; y = z[1];
-   coshz[0] = cosh (x) * cos (y);
-   coshz[1] = sinh (x) * sin (y);
-   return coshz;
-}
-
-double *SLcomplex_tanh (double *tanhz, double *z)
-{
-   double x, y, invden;
-   x = 2 * z[0];
-   y = 2 * z[1];
-   invden = 1.0 / (cosh (x) + cos (y));
-   tanhz[0] = invden * sinh (x);
-   tanhz[1] = invden * sin (y);
-   return tanhz;
-}
-#if 0
-static double *not_implemented (char *fun, double *p)
-{
-   SLang_verror (SL_NOT_IMPLEMENTED, "%s for complex numbers has not been implemented",
-		 fun);
-   *p = -1.0;
-   return p;
-}
-#endif
-/* Use: asinh(z) = -i asin(iz) */
-double *SLcomplex_asinh (double *asinhz, double *z)
-{
-   double iz[2];
-   
-   iz[0] = -z[1];
-   iz[1] = z[0];
-   
-   (void) SLcomplex_asin (iz, iz);
-   asinhz[0] = iz[1];
-   asinhz[1] = -iz[0];
-   
-   return asinhz;
-}
-
-/* Use: acosh (z) = i acos(z) */
-double *SLcomplex_acosh (double *acoshz, double *z)
-{
-   double iz[2];
-   
-   (void) SLcomplex_acos (iz, z);
-   acoshz[0] = -iz[1];
-   acoshz[1] = iz[0];
-
-   return acoshz;
-}
-
-/* Use: atanh(z) = -i atan(iz) */
-double *SLcomplex_atanh (double *atanhz, double *z)
-{
-   double iz[2];
-   
-   iz[0] = -z[1];
-   iz[1] = z[0];
-   
-   (void) SLcomplex_atan (iz, iz);
-   atanhz[0] = iz[1];
-   atanhz[1] = -iz[0];
-   
-   return atanhz;
-}
-
-static int complex_binary_result (int op, unsigned char a, unsigned char b,
-				  unsigned char *c)
-{
-   (void) a; (void) b;
-
-   switch (op)
-     {
-      default:
-      case SLANG_POW:
-      case SLANG_PLUS:
-      case SLANG_MINUS:
-      case SLANG_TIMES:
-      case SLANG_DIVIDE:
-	*c = SLANG_COMPLEX_TYPE;
-	break;
-
-      case SLANG_EQ:
-      case SLANG_NE:
-	*c = SLANG_CHAR_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int complex_complex_binary (int op,
-				   unsigned char a_type, VOID_STAR ap, unsigned int na,
-				   unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				   VOID_STAR cp)
-{
-   char *ic;
-   double *a, *b, *c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   a = (double *) ap;
-   b = (double *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = 2;
-   if (nb == 1) db = 0; else db = 2;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] + b[0];
-	     c[n + 1] = a[1] + b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] - b[0];
-	     c[n + 1] = a[1] - b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     SLcomplex_times (c + n, a, b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     if ((b[0] == 0.0) && (b[1] == 0.0))
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     SLcomplex_divide (c + n, a, b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] == b[0]) && (a[1] == b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] != b[0]) || (a[1] != b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     SLcomplex_pow (c + n, a, b);
-	     a += da; b += db;
-	  }
-	break;
-
-     }
-
-   return 1;
-}
-
-static int complex_double_binary (int op,
-				  unsigned char a_type, VOID_STAR ap, unsigned int na,
-				  unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				  VOID_STAR cp)
-{
-   char *ic;
-   double *a, *b, *c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   a = (double *) ap;
-   b = (double *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = 2;
-   if (nb == 1) db = 0; else db = 1;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] + b[0];
-	     c[n + 1] = a[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] - b[0];
-	     c[n + 1] = a[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double b0 = b[0];
-	     c[n] = a[0] * b0;
-	     c[n + 1] = a[1] * b0;
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double b0 = b[0];
-	     if (b0 == 0.0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     c[n] = a[0] / b0;
-	     c[n + 1] = a[1] / b0;
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] == b[0]) && (a[1] == 0.0));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] != b[0]) || (a[1] != 0.0));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     complex_dpow (c + n, a, b[0]);
-	     a += da; b += db;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int double_complex_binary (int op,
-				  unsigned char a_type, VOID_STAR ap, unsigned int na,
-				  unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				  VOID_STAR cp)
-{
-   char *ic;
-   double *a, *b, *c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   a = (double *) ap;
-   b = (double *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = 1;
-   if (nb == 1) db = 0; else db = 2;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] + b[0];
-	     c[n + 1] = b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] - b[0];
-	     c[n + 1] = -b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double a0 = a[0];
-	     c[n] = a0 * b[0];
-	     c[n + 1] = a0 * b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double z[2];
-	     if ((b[0] == 0.0) && (b[1] == 0.0))
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     z[0] = a[0];
-	     z[1] = 0.0;
-	     SLcomplex_divide (c + n, z, b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] == b[0]) && (0.0 == b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] != b[0]) || (0.0 != b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     dcomplex_pow (c + n, a[0], b);
-	     a += da; b += db;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int complex_generic_binary (int op,
-				   unsigned char a_type, VOID_STAR ap, unsigned int na,
-				   unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				   VOID_STAR cp)
-{
-   char *ic;
-   char *b;
-   double *a, *c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-   unsigned int sizeof_b;
-   SLang_To_Double_Fun_Type to_double;
-
-   if (NULL == (to_double = SLarith_get_to_double_fun (b_type, &sizeof_b)))
-     return 0;
-
-   (void) a_type;
-
-   a = (double *) ap;
-   b = (char *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = 2;
-   if (nb == 1) db = 0; else db = sizeof_b;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     complex_dpow (c + n, a, to_double((VOID_STAR)b));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] + to_double((VOID_STAR)b);
-	     c[n + 1] = a[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = a[0] - to_double((VOID_STAR)b);
-	     c[n + 1] = a[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double b0 = to_double((VOID_STAR)b);
-	     c[n] = a[0] * b0;
-	     c[n + 1] = a[1] * b0;
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double b0 = to_double((VOID_STAR)b);
-	     if (b0 == 0)
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     c[n] = a[0] / b0;
-	     c[n + 1] = a[1] / b0;
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] == to_double((VOID_STAR)b)) && (a[1] == 0.0));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((a[0] != to_double((VOID_STAR)b)) || (a[1] != 0.0));
-	     a += da; b += db;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int generic_complex_binary (int op,
-				   unsigned char a_type, VOID_STAR ap, unsigned int na,
-				   unsigned char b_type, VOID_STAR bp, unsigned int nb,
-				   VOID_STAR cp)
-{
-   double *b, *c;
-   char *a, *ic;
-   unsigned int n, n_max;
-   unsigned int da, db;
-   unsigned int sizeof_a;
-   SLang_To_Double_Fun_Type to_double;
-
-   if (NULL == (to_double = SLarith_get_to_double_fun (a_type, &sizeof_a)))
-     return 0;
-
-   (void) b_type;
-
-   a = (char *) ap;
-   b = (double *) bp;
-   c = (double *) cp;
-   ic = (char *) cp;
-
-   if (na == 1) da = 0; else da = sizeof_a;
-   if (nb == 1) db = 0; else db = 2;
-
-   if (na > nb) n_max = na; else n_max = nb;
-   n_max = 2 * n_max;
-
-   switch (op)
-     {
-      default:
-	return 0;
-      case SLANG_POW:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     dcomplex_pow (c + n, to_double((VOID_STAR)a), b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_PLUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = to_double((VOID_STAR)a) + b[0];
-	     c[n + 1] = b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_MINUS:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     c[n] = to_double((VOID_STAR)a) - b[0];
-	     c[n + 1] = -b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_TIMES:
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double a0 = to_double((VOID_STAR)a);
-	     c[n] = a0 * b[0];
-	     c[n + 1] = a0 * b[1];
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_DIVIDE:	       /* / */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     double z[2];
-	     if ((b[0] == 0.0) && (b[1] == 0.0))
-	       {
-		  SLang_Error = SL_DIVIDE_ERROR;
-		  return -1;
-	       }
-	     z[0] = to_double((VOID_STAR)a);
-	     z[1] = 0.0;
-	     SLcomplex_divide (c + n, z, b);
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_EQ: 		       /* == */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((to_double((VOID_STAR)a) == b[0]) && (0.0 == b[1]));
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:		       /* != */
-	for (n = 0; n < n_max; n += 2)
-	  {
-	     ic[n/2] = ((to_double((VOID_STAR)a) != b[0]) || (0.0 != b[1]));
-	     a += da; b += db;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int complex_unary_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) a;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUSPLUS:
-      case SLANG_MINUSMINUS:
-      case SLANG_CHS:
-      case SLANG_MUL2:
-	*b = SLANG_COMPLEX_TYPE;
-	break;
-
-      case SLANG_SQR:		       /* |Real|^2 + |Imag|^2 ==> double */
-      case SLANG_ABS:		       /* |z| ==> double */
-	*b = SLANG_DOUBLE_TYPE;
-	break;
-
-      case SLANG_SIGN:
-	*b = SLANG_INT_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int complex_unary (int op,
-			  unsigned char a_type, VOID_STAR ap, unsigned int na,
-			  VOID_STAR bp)
-{
-   unsigned int n;
-   double *a, *b;
-   int *ic;
-
-   (void) a_type;
-
-   a = (double *) ap;
-   b = (double *) bp;
-   ic = (int *) bp;
-
-   na = 2 * na;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUSPLUS:
-	for (n = 0; n < na; n += 2) b[n] = (a[n] + 1);
-	break;
-      case SLANG_MINUSMINUS:
-	for (n = 0; n < na; n += 2) b[n] = (a[n] - 1);
-	break;
-      case SLANG_CHS:
-	for (n = 0; n < na; n += 2)
-	  {
-	     b[n] = -(a[n]);
-	     b[n + 1] = -(a[n + 1]);
-	  }
-	break;
-      case SLANG_SQR:		       /* |Real|^2 + |Imag|^2 ==> double */
-	for (n = 0; n < na; n += 2)
-	  b[n/2] = (a[n] * a[n] + a[n + 1] * a[n + 1]);
-	break;
-
-      case SLANG_MUL2:
-	for (n = 0; n < na; n += 2)
-	  {
-	     b[n] = (2 * a[n]);
-	     b[n + 1] = (2 * a[n + 1]);
-	  }
-	break;
-
-      case SLANG_ABS:		       /* |z| ==> double */
-	for (n = 0; n < na; n += 2)
-	  b[n/2] = SLcomplex_abs (a + n);
-	break;
-
-      case SLANG_SIGN:
-	/* Another creative extension.  Lets return an integer which indicates
-	 * whether the complex number is in the upperhalf plane or not.
-	 */
-	for (n = 0; n < na; n += 2)
-	  {
-	     if (a[n + 1] < 0.0) ic[n/2] = -1;
-	     else if (a[n + 1] > 0.0) ic[n/2] = 1;
-	     else ic[n/2] = 0;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static int
-complex_typecast (unsigned char from_type, VOID_STAR from, unsigned int num,
-		  unsigned char to_type, VOID_STAR to)
-{
-   double *z;
-   double *d;
-   char *i;
-   unsigned int n;
-   unsigned int sizeof_i;
-   SLang_To_Double_Fun_Type to_double;
-
-   (void) to_type;
-
-   z = (double *) to;
-
-   switch (from_type)
-     {
-      default:
-	if (NULL == (to_double = SLarith_get_to_double_fun (from_type, &sizeof_i)))
-	  return 0;
-	i = (char *) from;
-	for (n = 0; n < num; n++)
-	  {
-	     *z++ = to_double ((VOID_STAR) i);
-	     *z++ = 0.0;
-
-	     i += sizeof_i;
-	  }
-	break;
-
-      case SLANG_DOUBLE_TYPE:
-	d = (double *) from;
-	for (n = 0; n < num; n++)
-	  {
-	     *z++ = d[n];
-	     *z++ = 0.0;
-	  }
-	break;
-     }
-
-   return 1;
-}
-
-static void complex_destroy (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   SLfree ((char *)*(double **) ptr);
-}
-
-static int complex_push (unsigned char type, VOID_STAR ptr)
-{
-   double *z;
-
-   (void) type;
-   z = *(double **) ptr;
-   return SLang_push_complex (z[0], z[1]);
-}
-
-static int complex_pop (unsigned char type, VOID_STAR ptr)
-{
-   double *z;
-
-   (void) type;
-   z = *(double **) ptr;
-   return SLang_pop_complex (&z[0], &z[1]);
-}
-
-int _SLinit_slcomplex (void)
-{
-   SLang_Class_Type *cl;
-   unsigned char *types;
-
-   if (NULL == (cl = SLclass_allocate_class ("Complex_Type")))
-     return -1;
-
-   (void) SLclass_set_destroy_function (cl, complex_destroy);
-   (void) SLclass_set_push_function (cl, complex_push);
-   (void) SLclass_set_pop_function (cl, complex_pop);
-
-   if (-1 == SLclass_register_class (cl, SLANG_COMPLEX_TYPE, 2 * sizeof (double),
-				     SLANG_CLASS_TYPE_VECTOR))
-     return -1;
-
-   types = _SLarith_Arith_Types;
-   while (*types != SLANG_DOUBLE_TYPE)
-     {
-	unsigned char t = *types++;
-
-	if ((-1 == SLclass_add_binary_op (t, SLANG_COMPLEX_TYPE, generic_complex_binary, complex_binary_result))
-	    || (-1 == SLclass_add_binary_op (SLANG_COMPLEX_TYPE, t, complex_generic_binary, complex_binary_result))
-	    || (-1 == (SLclass_add_typecast (t, SLANG_COMPLEX_TYPE, complex_typecast, 1))))
-	  return -1;
-     }
-
-   if ((-1 == (SLclass_add_binary_op (SLANG_COMPLEX_TYPE, SLANG_COMPLEX_TYPE, complex_complex_binary, complex_binary_result)))
-       || (-1 == (SLclass_add_binary_op (SLANG_COMPLEX_TYPE, SLANG_DOUBLE_TYPE, complex_double_binary, complex_binary_result)))
-       || (-1 == (SLclass_add_binary_op (SLANG_DOUBLE_TYPE, SLANG_COMPLEX_TYPE, double_complex_binary, complex_binary_result)))
-       || (-1 == (SLclass_add_unary_op (SLANG_COMPLEX_TYPE, complex_unary, complex_unary_result)))
-       || (-1 == (SLclass_add_typecast (SLANG_DOUBLE_TYPE, SLANG_COMPLEX_TYPE, complex_typecast, 1))))
-     return -1;
-
-   return 0;
-}
-
-#endif				       /* if SLANG_HAS_COMPLEX */
-
diff --git a/mdk-stage1/slang/slcompat.c b/mdk-stage1/slang/slcompat.c
deleted file mode 100644
index 5aa122483..000000000
--- a/mdk-stage1/slang/slcompat.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* These functions are provided for backward compatibility and are obsolete.
- * Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Compatibility */
-int SLang_init_slunix (void)
-{
-   if ((-1 == SLang_init_posix_dir ())
-       || (-1 == SLang_init_posix_process ())
-       || (-1 == SLdefine_for_ifdef ("__SLUNIX__")))
-     return -1;
-
-   return 0;
-}
-
-int SLang_init_slfile (void)
-{
-   if ((-1 == SLang_init_stdio ())
-       || (-1 == SLang_init_posix_dir ())
-       || (-1 == SLdefine_for_ifdef("__SLFILE__")))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slcurses.c b/mdk-stage1/slang/slcurses.c
deleted file mode 100644
index f1212afc8..000000000
--- a/mdk-stage1/slang/slcurses.c
+++ /dev/null
@@ -1,972 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <signal.h>
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-#include "slcurses.h"
-
-/* This file is meant to implement a primitive curses implementation in
- * terms of SLsmg calls.  The fact is that the interfaces are sufficiently
- * different that a 100% emulation is not possible.
- */
-
-SLcurses_Window_Type *SLcurses_Stdscr;
-int SLcurses_Esc_Delay = 150;	       /* 0.15 seconds */
-SLtt_Char_Type SLcurses_Acs_Map [128];
-int SLcurses_Is_Endwin = 1;
-int SLcurses_Num_Colors = 8;
-
-static void blank_line (SLsmg_Char_Type *b, unsigned int len, SLsmg_Char_Type color)
-{
-   SLsmg_Char_Type *bmax;
-
-   bmax = b + len;
-   color = SLSMG_BUILD_CHAR(' ', color);
-
-   while (b < bmax) *b++ = color;
-}
-
-static int va_mvprintw (SLcurses_Window_Type *w, int r, int c, int do_move,
-			char *fmt, va_list ap)
-{
-   char buf[1024];
-
-   if (do_move) SLcurses_wmove (w, r, c);
-
-   (void) _SLvsnprintf (buf, sizeof(buf), fmt, ap);
-
-   SLcurses_waddnstr (w, buf, -1);
-   return 0;
-}
-
-int SLcurses_mvprintw (int r, int c, char *fmt, ...)
-{
-   va_list ap;
-
-   va_start(ap, fmt);
-   va_mvprintw (SLcurses_Stdscr, r, c, 1, fmt, ap);
-   va_end(ap);
-
-   return 0;
-}
-
-int SLcurses_mvwprintw (SLcurses_Window_Type *w, int r, int c, char *fmt, ...)
-{
-   va_list ap;
-
-   va_start(ap, fmt);
-   va_mvprintw (w, r, c, 1, fmt, ap);
-   va_end(ap);
-
-   return 0;
-}
-
-int SLcurses_wprintw (SLcurses_Window_Type *w, char *fmt, ...)
-{
-   va_list ap;
-
-   va_start(ap, fmt);
-   va_mvprintw (w, 0, 0, 0, fmt, ap);
-   va_end(ap);
-
-   return 0;
-}
-
-int SLcurses_printw (char *fmt, ...)
-{
-   va_list ap;
-
-   va_start(ap, fmt);
-   va_mvprintw (SLcurses_Stdscr, 0, 0, 0, fmt, ap);
-   va_end(ap);
-
-   return 0;
-}
-
-int SLcurses_nil (void)
-{
-   return 0;
-}
-
-int SLcurses_has_colors(void)
-{
-   return SLtt_Use_Ansi_Colors;
-}
-
-int SLcurses_nodelay (SLcurses_Window_Type *w, int onoff)
-{
-   w->delay_off = (onoff ? 0 : -1);
-   return 0;
-}
-
-int SLcurses_wgetch (SLcurses_Window_Type *w)
-{
-   if (w == NULL)
-     return ERR;
-
-   SLcurses_wrefresh (w);
-
-   if ((w->delay_off == -1) ||
-       SLang_input_pending (w->delay_off))
-     {
-	if (w->use_keypad)
-	  {
-	     int ch = SLang_getkey ();
-	     if (ch == '\033')
-	       {
-		  if (0 == SLang_input_pending (ESCDELAY / 100))
-		    return ch;
-	       }
-	     else if (ch == 0xFFFF) return ERR;
-	     SLang_ungetkey (ch);
-	     return SLkp_getkey ();
-	  }
-	return SLang_getkey ();
-     }
-
-   return ERR;
-}
-
-int SLcurses_getch (void)
-{
-   return SLcurses_wgetch (SLcurses_Stdscr);
-}
-
-/* This is a super hack.  That fact is that SLsmg and curses
- * are incompatible.
- */
-static unsigned char Color_Objects[256];
-
-static unsigned int map_attr_to_object (SLtt_Char_Type attr)
-{
-   unsigned int obj;
-   SLtt_Char_Type at;
-
-   obj = (attr >> 8) & 0xFF;
-
-   if (SLtt_Use_Ansi_Colors)
-     {
-	if (Color_Objects[obj] != 0) return obj;
-
-	at = SLtt_get_color_object (obj & 0xF);
-
-	if (attr & A_BOLD) at |= SLTT_BOLD_MASK;
-	if (attr & A_UNDERLINE) at |= SLTT_ULINE_MASK;
-	if (attr & A_REVERSE) at |= SLTT_REV_MASK;
-
-	SLtt_set_color_object (obj, at);
-
-	Color_Objects[obj] = 1;
-     }
-   else obj = obj & 0xF0;
-
-   return obj;
-
-}
-
-int SLcurses_start_color (void)
-{
-   int f, b;
-   int obj;
-
-   if (SLtt_Use_Ansi_Colors == 0) return -1;
-
-   obj = 0;
-   for (f = 0; f < 16; f++)
-     {
-	for (b = 0; b < 16; b++)
-	  {
-	     obj++;
-	     SLtt_set_color_fgbg (obj, f, b);
-	  }
-     }
-   return 0;
-}
-
-#ifdef SIGINT
-static void sigint_handler (int sig)
-{
-   SLang_reset_tty ();
-   SLsmg_reset_smg ();
-   exit (sig);
-}
-#endif
-
-/* Values are assumed to be 0, 1, 2.  This fact is exploited */
-static int TTY_State;
-
-static int init_tty (int suspend_ok)
-{
-   if (-1 == SLang_init_tty (-1, 1, 0))
-     return -1;
-
-#ifdef REAL_UNIX_SYSTEM
-   if (suspend_ok) SLtty_set_suspend_state (1);
-#endif
-   return 0;
-}
-
-int SLcurses_raw (void)
-{
-   TTY_State = 1;
-   return init_tty (0);
-}
-
-int SLcurses_cbreak (void)
-{
-   TTY_State = 2;
-   return init_tty (1);
-}
-
-#if defined(SIGTSTP) && defined(SIGSTOP)
-static void sigtstp_handler (int sig)
-{
-   sig = errno;
-
-   SLsmg_suspend_smg ();
-
-   if (TTY_State)
-     SLang_reset_tty ();
-
-   kill(getpid(),SIGSTOP);
-
-   SLsmg_resume_smg ();
-
-   if (TTY_State) init_tty (TTY_State - 1);
-
-   signal (SIGTSTP, sigtstp_handler);
-   errno = sig;
-}
-#endif
-
-SLcurses_Window_Type *SLcurses_initscr (void)
-{
-   SLcurses_Is_Endwin = 0;
-   SLsmg_Newline_Behavior = SLSMG_NEWLINE_MOVES;
-   SLtt_get_terminfo ();
-
-#if !defined(IBMPC_SYSTEM) && !defined(VMS)
-   if (-1 == (SLcurses_Num_Colors = SLtt_tgetnum ("Co")))
-#endif
-     SLcurses_Num_Colors = 8;
-
-   if ((-1 == SLkp_init ())
-       || (-1 == SLcurses_cbreak ())
-       || (NULL == (SLcurses_Stdscr = SLcurses_newwin (0, 0, 0, 0)))
-       || (-1 == SLsmg_init_smg ()))
-     {
-	SLang_doerror (NULL);
-	SLang_exit_error ("SLcurses_initscr: init failed\n");
-	return NULL;
-     }
-
-#ifdef SIGINT
-   signal (SIGINT, sigint_handler);
-#endif
-
-#if defined(SIGTSTP) && defined(SIGSTOP)
-   signal (SIGTSTP, sigtstp_handler);
-#endif
-
-   SLtt_set_mono (A_BOLD >> 8, NULL, SLTT_BOLD_MASK);
-   SLtt_set_mono (A_UNDERLINE >> 8, NULL, SLTT_ULINE_MASK);
-   SLtt_set_mono (A_REVERSE >> 8, NULL, SLTT_REV_MASK);
-   /* SLtt_set_mono (A_BLINK >> 8, NULL, SLTT_BLINK_MASK); */
-   SLtt_set_mono ((A_BOLD|A_UNDERLINE) >> 8, NULL, SLTT_ULINE_MASK|SLTT_BOLD_MASK);
-   SLtt_set_mono ((A_REVERSE|A_UNDERLINE) >> 8, NULL, SLTT_ULINE_MASK|SLTT_REV_MASK);
-
-   if (SLtt_Has_Alt_Charset)
-     {
-       SLcurses_Acs_Map[SLSMG_ULCORN_CHAR] = SLSMG_ULCORN_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_URCORN_CHAR] = SLSMG_URCORN_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_LLCORN_CHAR] = SLSMG_LLCORN_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_LRCORN_CHAR] = SLSMG_LRCORN_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_UTEE_CHAR] = SLSMG_UTEE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_DTEE_CHAR] = SLSMG_DTEE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_LTEE_CHAR] = SLSMG_LTEE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_RTEE_CHAR] = SLSMG_RTEE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_VLINE_CHAR] = SLSMG_VLINE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_HLINE_CHAR] = SLSMG_HLINE_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_PLUS_CHAR] = SLSMG_PLUS_CHAR | A_ALTCHARSET;
-       SLcurses_Acs_Map[SLSMG_CKBRD_CHAR] = SLSMG_CKBRD_CHAR | A_ALTCHARSET;
-     }
-   else
-     {
-       /* ugly defaults to use on terminals which don't support graphics */
-       SLcurses_Acs_Map[SLSMG_ULCORN_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_URCORN_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_LLCORN_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_LRCORN_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_UTEE_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_DTEE_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_LTEE_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_RTEE_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_VLINE_CHAR] = '|';
-       SLcurses_Acs_Map[SLSMG_HLINE_CHAR] = '-';
-       SLcurses_Acs_Map[SLSMG_PLUS_CHAR] = '+';
-       SLcurses_Acs_Map[SLSMG_CKBRD_CHAR] = '#';
-     }
-
-   return SLcurses_Stdscr;
-}
-
-int SLcurses_wattrset (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
-   unsigned int obj;
-
-   obj = map_attr_to_object (ch);
-   w->color = obj;
-   w->attr = ch;
-   return 0;
-}
-
-int SLcurses_wattroff (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
-   if (SLtt_Use_Ansi_Colors)
-     return SLcurses_wattrset (w, 0);
-
-   w->attr &= ~ch;
-   return SLcurses_wattrset (w, w->attr);
-}
-
-int SLcurses_wattron (SLcurses_Window_Type *w, SLtt_Char_Type ch)
-{
-   if (SLtt_Use_Ansi_Colors)
-     return SLcurses_wattrset (w, ch);
-
-   w->attr |= ch;
-   return SLcurses_wattrset (w, w->attr);
-}
-
-int SLcurses_delwin (SLcurses_Window_Type *w)
-{
-   if (w == NULL) return 0;
-   if (w->lines != NULL)
-     {
-	SLsmg_Char_Type **lines = w->lines;
-	if (w->is_subwin == 0)
-	  {
-	     unsigned int r, rmax;
-
-	     rmax = w->nrows;
-	     for (r = 0; r < rmax; r++)
-	       {
-		  SLfree ((char *)lines[r]);
-	       }
-	  }
-
-	SLfree ((char *)lines);
-     }
-
-   SLfree ((char *)w);
-   if (w == SLcurses_Stdscr)
-     SLcurses_Stdscr = NULL;
-   return 0;
-}
-
-SLcurses_Window_Type *SLcurses_newwin (unsigned int nrows, unsigned int ncols,
-				       unsigned int r, unsigned int c)
-{
-   SLcurses_Window_Type *win;
-   SLsmg_Char_Type **lines;
-
-   if (r >= (unsigned int) SLtt_Screen_Rows)
-     return NULL;
-   if (c >= (unsigned int) SLtt_Screen_Cols)
-     return NULL;
-
-   if (NULL == (win = (SLcurses_Window_Type *) SLmalloc (sizeof (SLcurses_Window_Type))))
-     return NULL;
-
-   SLMEMSET ((char *) win, 0, sizeof (SLcurses_Window_Type));
-
-   if (nrows == 0)
-     nrows = (unsigned int) SLtt_Screen_Rows - r;
-   if (ncols == 0)
-     ncols = (unsigned int) SLtt_Screen_Cols - c;
-
-   lines = (SLsmg_Char_Type **) SLmalloc (nrows * sizeof (SLsmg_Char_Type *));
-   if (lines == NULL)
-     {
-	SLcurses_delwin (win);
-	return NULL;
-     }
-
-   SLMEMSET ((char *) lines, 0, nrows * sizeof (SLsmg_Char_Type *));
-
-   win->lines = lines;
-   win->scroll_max = win->nrows = nrows;
-   win->ncols = ncols;
-   win->_begy = r;
-   win->_begx = c;
-   win->_maxx = (c + ncols) - 1;
-   win->_maxy = (r + nrows) - 1;
-   win->modified = 1;
-   win->delay_off = -1;
-
-   for (r = 0; r < nrows; r++)
-     {
-	SLsmg_Char_Type *b;
-
-	b = (SLsmg_Char_Type *) SLmalloc (ncols * sizeof (SLsmg_Char_Type));
-	if (b == NULL)
-	  {
-	     SLcurses_delwin (win);
-	     return NULL;
-	  }
-	lines [r] = b;
-	blank_line (b, ncols, 0);
-     }
-
-   return win;
-}
-
-int SLcurses_wmove (SLcurses_Window_Type *win, unsigned int r, unsigned int c)
-{
-   if (win == NULL) return -1;
-   win->_cury = r;
-   win->_curx = c;
-   win->modified = 1;
-   return 0;
-}
-
-static int do_newline (SLcurses_Window_Type *w)
-{
-   w->_curx = 0;
-   w->_cury += 1;
-   if (w->_cury >= w->scroll_max)
-     {
-	w->_cury = w->scroll_max - 1;
-	if (w->scroll_ok)
-	  SLcurses_wscrl (w, 1);
-     }
-
-   return 0;
-}
-
-int SLcurses_waddch (SLcurses_Window_Type *win, SLtt_Char_Type attr)
-{
-   SLsmg_Char_Type *b, ch;
-   SLsmg_Char_Type color;
-
-   if (win == NULL) return -1;
-
-   if (win->_cury >= win->nrows)
-     {
-	/* Curses seems to move current postion to top of window. */
-	win->_cury = win->_curx = 0;
-	return -1;
-     }
-
-   win->modified = 1;
-
-   ch = SLSMG_EXTRACT_CHAR(attr);
-
-   if (attr == ch)
-     color = win->color;
-   else
-     {
-	/* hack to pick up the default color for graphics chars */
-	if (((attr & A_COLOR) == 0) && ((attr & A_ALTCHARSET) != 0))
-	  {
-	     /* FIXME: priority=medium: Use SLSMG_?? instead of << */
-	     attr |= win->color << 8;
-	  }
-	color = map_attr_to_object (attr);
-     }
-
-   if (ch < ' ')
-     {
-	if (ch == '\n')
-	  {
-	     SLcurses_wclrtoeol (win);
-	     return do_newline (win);
-	  }
-
-	if (ch == '\r')
-	  {
-	     win->_curx = 0;
-	     return 0;
-	  }
-
-	if (ch == '\b')
-	  {
-	     if (win->_curx > 0)
-	       win->_curx--;
-
-	     return 0;
-	  }
-
-	/* HACK HACK!!!! */
-	if (ch == '\t') ch = ' ';
-     }
-
-   if (win->_curx >= win->ncols)
-     do_newline (win);
-
-   b = win->lines[win->_cury] + win->_curx;
-   *b = SLSMG_BUILD_CHAR(ch,color);
-   win->_curx++;
-
-   return 0;
-}
-
-int SLcurses_wnoutrefresh (SLcurses_Window_Type *w)
-{
-   unsigned int len;
-   unsigned int r, c;
-   unsigned int i, imax;
-
-   if (SLcurses_Is_Endwin)
-     {
-	if (TTY_State) init_tty (TTY_State - 1);
-       	SLsmg_resume_smg ();
-	SLcurses_Is_Endwin = 0;
-     }
-
-   if (w == NULL)
-     {
-	SLsmg_refresh ();
-	return -1;
-     }
-
-   if (w->modified == 0)
-     return 0;
-
-   r = w->_begy;
-   c = w->_begx;
-
-   len = w->ncols;
-   imax = w->nrows;
-
-   for (i = 0; i < imax; i++)
-     {
-	SLsmg_gotorc (r, c);
-	SLsmg_write_color_chars (w->lines[i], len);
-	r++;
-     }
-
-   if (w->has_box)
-     SLsmg_draw_box(w->_begy, w->_begx, w->nrows, w->ncols);
-
-   SLsmg_gotorc (w->_begy + w->_cury, w->_begx + w->_curx);
-   w->modified = 0;
-   return 0;
-}
-
-int SLcurses_wrefresh (SLcurses_Window_Type *w)
-{
-   if (w == NULL)
-     return -1;
-
-   if (w->modified == 0)
-     return 0;
-
-   SLcurses_wnoutrefresh (w);
-   SLsmg_refresh ();
-   return 0;
-}
-
-int SLcurses_wclrtoeol (SLcurses_Window_Type *w)
-{
-   SLsmg_Char_Type *b, *bmax;
-   SLsmg_Char_Type blank;
-
-   if (w == NULL) return -1;
-   if (w->_cury >= w->nrows)
-     return 0;
-
-   w->modified = 1;
-
-   blank = SLSMG_BUILD_CHAR(' ',w->color);
-
-   b = w->lines[w->_cury];
-   bmax = b + w->ncols;
-   b += w->_curx;
-
-   while (b < bmax) *b++ = blank;
-   return 0;
-}
-
-int SLcurses_wclrtobot (SLcurses_Window_Type *w)
-{
-   SLsmg_Char_Type *b, *bmax;
-   SLsmg_Char_Type blank;
-   unsigned int r;
-
-   if (w == NULL) return -1;
-
-   w->modified = 1;
-   blank = SLSMG_BUILD_CHAR(' ',w->color);
-   SLcurses_wclrtoeol (w);
-   for (r = w->_cury + 1; r < w->nrows; r++)
-     {
-	b = w->lines [r];
-	bmax = b + w->ncols;
-
-	while (b < bmax) *b++ = blank;
-     }
-
-   return 0;
-}
-
-int SLcurses_wscrl (SLcurses_Window_Type *w, int n)
-{
-   SLsmg_Char_Type **lines;
-   unsigned int r, rmax, rmin, ncols;
-   SLsmg_Char_Type color;
-
-   if ((w == NULL) || (w->scroll_ok == 0))
-     return -1;
-
-   w->modified = 1;
-#if 0
-   if (w->is_subwin)
-     {
-	SLang_reset_tty ();
-	SLsmg_reset_smg ();
-	fprintf (stderr, "\rAttempt to scroll a subwindow\n");
-	exit (1);
-     }
-#endif
-
-   color = w->color;
-   ncols = w->ncols;
-   lines = w->lines;
-   rmax = w->scroll_max;
-   rmin = w->scroll_min;
-   if (rmax > w->nrows)
-     rmax = w->nrows;
-   if (rmin >= rmax)
-     return 0;
-
-   while (n > 0)
-     {
-	for (r = rmin + 1; r < rmax; r++)
-	  {
-	     /* lines[r - 1] = lines[r]; */
-	     memcpy ((char *)lines[r - 1], (char *)lines[r],
-		     sizeof (SLsmg_Char_Type) * ncols);
-	  }
-	blank_line (lines[rmax - 1], ncols, color);
-	n--;
-     }
-
-   rmax--;
-   while (n < 0)
-     {
-	for (r = rmax; r > rmin; r--)
-	  {
-	     memcpy ((char *)lines[r], (char *)lines[r - 1],
-		     sizeof (SLsmg_Char_Type) * ncols);
-	  }
-	blank_line (lines[rmin], ncols, color);
-	n++;
-     }
-
-   /* wmove (w, w->nrows - 1, 0); */
-   /* wclrtobot (w); */
-   return 0;
-}
-
-/* Note: if len is < 0, entire string will be used.
- */
-int SLcurses_waddnstr (SLcurses_Window_Type *w, char *str, int len)
-{
-   SLsmg_Char_Type *b;
-   SLsmg_Char_Type color;
-   unsigned char ch;
-   unsigned int nrows, ncols, crow, ccol;
-
-   if ((w == NULL)
-       || (str == NULL))
-     return -1;
-
-   w->modified = 1;
-   nrows = w->nrows;
-   ncols = w->ncols;
-   crow = w->_cury;
-   ccol = w->_curx;
-   color = w->color;
-
-   if (w->scroll_max <= nrows)
-     nrows = w->scroll_max;
-
-   if (crow >= nrows)
-     crow = 0;			       /* wrap back to top */
-
-   b = w->lines [crow] + ccol;
-
-   while (len && ((ch = (unsigned char) *str++) != 0))
-     {
-	len--;
-
-	if (ch == '\n')
-	  {
-	     w->_cury = crow;
-	     w->_curx = ccol;
-	     SLcurses_wclrtoeol (w);
-	     do_newline (w);
-	     crow = w->_cury;
-	     ccol = w->_curx;
-	     b = w->lines[crow];
-	     continue;
-	  }
-
-	if (ccol >= ncols)
-	  {
-	     ccol = 0;
-	     crow++;
-	     if (crow >= nrows)
-	       {
-		  w->_curx = 0;
-		  w->_cury = crow;
-		  do_newline (w);
-		  crow = w->_cury;
-		  ccol = w->_curx;
-	       }
-
-	     b = w->lines [crow];
-	  }
-
-	if (ch == '\t')
-	  {
-	     unsigned int n = ccol;
-	     n += SLsmg_Tab_Width;
-	     n = SLsmg_Tab_Width - (n % SLsmg_Tab_Width);
-	     if (ccol + n > ncols) n = ncols - len;
-	     ccol += n;
-	     while (n--)
-	       *b++ = SLSMG_BUILD_CHAR(' ',color);
-	     continue;
-	  }
-
-	*b++ = SLSMG_BUILD_CHAR(ch, color);
-	ccol++;
-     }
-
-   w->_curx = ccol;
-   w->_cury = crow;
-
-   return 0;
-}
-
-/* This routine IS NOT CORRECT.  It needs to compute the proper overlap
- * and copy accordingly.  Here, I just assume windows are same size.
- */
-#if 0
-int SLcurses_overlay (SLcurses_Window_Type *swin, SLcurses_Window_Type *dwin)
-{
-   SLsmg_Char_Type *s, *smax, *d, *dmax;
-
-   if ((swin == NULL) || (dwin == NULL))
-     return -1;
-
-   s = swin->buf;
-   smax = swin->bufmax;
-   d = dwin->buf;
-   dmax = dwin->bufmax;
-
-   while ((s < smax) && (d < dmax))
-     {
-	SLsmg_Char_Type ch = *s++;
-	if (SLSMG_EXTRACT_CHAR(ch) != ' ')
-	  *d = ch;
-	d++;
-     }
-
-   return -1;			       /* not implemented */
-}
-
-#endif
-
-SLcurses_Window_Type *SLcurses_subwin (SLcurses_Window_Type *orig,
-				       unsigned int nlines, unsigned int ncols,
-				       unsigned int begin_y, unsigned int begin_x)
-{
-   SLcurses_Window_Type *sw;
-   int r, c;
-   unsigned int i;
-
-   if (orig == NULL)
-     return NULL;
-
-   sw = (SLcurses_Window_Type *) SLmalloc (sizeof (SLcurses_Window_Type));
-   if (sw == NULL)
-     return NULL;
-
-   SLMEMSET ((char *)sw, 0, sizeof (SLcurses_Window_Type));
-#if 1
-   r = begin_y - orig->_begy;
-#else
-   r = 1 + ((int)orig->nrows - (int)nlines) / 2;
-#endif
-   if (r < 0) r = 0;
-   if (r + nlines > orig->nrows) nlines = orig->nrows - r;
-
-   c = ((int)orig->ncols - (int)ncols) / 2;
-   if (c < 0) c = 0;
-   if (c + ncols > orig->ncols) ncols = orig->ncols - c;
-
-   sw->scroll_min = 0;
-   sw->scroll_max = sw->nrows = nlines;
-   sw->ncols = ncols;
-   sw->_begy = begin_y;
-   sw->_begx = begin_x;
-   sw->_maxx = (begin_x + ncols) - 1;
-   sw->_maxy = (begin_y + nlines) - 1;
-
-   sw->lines = (SLsmg_Char_Type **) SLmalloc (nlines * sizeof (SLsmg_Char_Type *));
-   if (sw->lines == NULL)
-     {
-	SLcurses_delwin (sw);
-	return NULL;
-     }
-
-   for (i = 0; i < nlines; i++)
-     {
-	sw->lines [i] = orig->lines [r + i] + c;
-     }
-
-   sw->is_subwin = 1;
-   return sw;
-}
-
-int SLcurses_wclear (SLcurses_Window_Type *w)
-{
-   unsigned int i;
-
-   if (w != NULL) w->modified = 1;
-   for (i=0; i < w->nrows; i++)
-     blank_line (w->lines[i], w->ncols, w->color);
-   return 0;
-}
-
-int SLcurses_wdelch (SLcurses_Window_Type *w)
-{
-   SLsmg_Char_Type *p, *p1, *pmax;
-
-   p = w->lines[w->_cury];
-   pmax = p + w->ncols;
-   p += w->_curx;
-   p1 = p + 1;
-
-   while (p1 < pmax)
-     {
-	*p = *p1;
-	p = p1;
-	p1++;
-     }
-
-   if (p < pmax)
-     *p = SLSMG_BUILD_CHAR(' ',w->color);
-
-   w->modified = 1;
-   return 0;
-}
-
-int SLcurses_winsch (SLcurses_Window_Type *w, int ch)
-{
-   SLsmg_Char_Type *p, *p1, *pmax;
-
-   p = w->lines[w->_cury];
-   pmax = p + w->ncols;
-   p += w->_curx;
-   p1 = pmax - 1;
-
-   while (pmax > p)
-     {
-	*pmax = *p1;
-	pmax = p1;
-	p1--;
-     }
-
-   if (p < pmax)
-     *p = SLSMG_BUILD_CHAR(ch, w->color);
-
-   w->modified = 1;
-   return 0;
-}
-
-int SLcurses_endwin (void)
-{
-   SLcurses_Is_Endwin = 1;
-   SLsmg_suspend_smg ();
-   SLang_reset_tty ();
-   return 0;
-}
-
-#if 0
-int SLcurses_mvwscanw (SLcurses_Window_Type *w, unsigned int r, unsigned int c,
-		       char *fmt, ...)
-{
-#if HAVE_VFSCANF
-   int ret;
-   va_list ap;
-
-   SLcurses_wmove (w, r, c);
-   SLcurses_wrefresh (w);
-
-   va_start(ap, fmt);
-   ret = vfscanf (stdin, fmt, ap);
-   va_end(ap);
-   return ret;
-#else
-   return 0;
-#endif
-}
-
-int SLcurses_wscanw (SLcurses_Window_Type *w, char *fmt, ...)
-{
-#if HAVE_VFSCANF
-  va_list ap;
-   int ret;
-
-   SLcurses_wrefresh (w);
-
-   va_start(ap, fmt);
-   ret = vfscanf (stdin, fmt, ap);
-   va_end(ap);
-
-   return ret;
-#else
-   return 0;
-#endif
-}
-
-int SLcurses_scanw (char *fmt, ...)
-{
-#ifdef HAVE_VFSCANF
-   va_list ap;
-   int ret;
-
-   SLcurses_wrefresh (SLcurses_Stdscr);
-
-   va_start(ap, fmt);
-   ret = vfscanf (stdin, fmt, ap);
-   va_end(ap);
-
-   return ret;
-#else
-   return 0;
-#endif
-}
-#endif
-
-int SLcurses_clearok (SLcurses_Window_Type *w, int bf)
-{
-   if (bf)
-     {
-	SLsmg_cls ();
-	w->modified = 1;
-     }
-   return 0;
-}
diff --git a/mdk-stage1/slang/slcurses.h b/mdk-stage1/slang/slcurses.h
deleted file mode 100644
index fa082304f..000000000
--- a/mdk-stage1/slang/slcurses.h
+++ /dev/null
@@ -1,353 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include <stdio.h>
-
-#ifndef SLANG_VERSION
-# include <slang.h>
-#endif
-
-/* This is a temporary hack until lynx is fixed to not include this file. */
-#ifndef LYCURSES_H
-
-typedef struct
-{
-   unsigned int _begy, _begx, _maxy, _maxx;
-   unsigned int _curx, _cury;
-   unsigned int nrows, ncols;
-   unsigned int scroll_min, scroll_max;
-   SLsmg_Char_Type **lines;
-   SLsmg_Char_Type color;
-   int is_subwin;
-   SLtt_Char_Type attr;
-   int delay_off;
-   int scroll_ok;
-   int modified;
-   int has_box;
-   int use_keypad;
-}
-SLcurses_Window_Type;
-
-extern int SLcurses_wclrtobot (SLcurses_Window_Type *);
-extern int SLcurses_wscrl (SLcurses_Window_Type *, int);
-extern int SLcurses_wrefresh (SLcurses_Window_Type *);
-extern int SLcurses_delwin (SLcurses_Window_Type *);
-extern int SLcurses_wprintw (SLcurses_Window_Type *, char *, ...);
-extern SLcurses_Window_Type *SLcurses_newwin (unsigned int, unsigned int,
-					      unsigned int, unsigned int);
-
-extern SLcurses_Window_Type *SLcurses_subwin (SLcurses_Window_Type *,
-					      unsigned int, unsigned int,
-					      unsigned int, unsigned int);
-
-extern int SLcurses_wnoutrefresh (SLcurses_Window_Type *);
-extern int SLcurses_wclrtoeol (SLcurses_Window_Type *);
-
-extern int SLcurses_wmove (SLcurses_Window_Type *, unsigned int, unsigned int);
-extern int SLcurses_waddch (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_waddnstr (SLcurses_Window_Type *, char *, int);
-
-#define waddnstr		SLcurses_waddnstr
-#define waddch			SLcurses_waddch
-#define waddstr(w,s)		waddnstr((w),(s),-1)
-#define addstr(x)		waddstr(stdscr, (x))
-#define addnstr(s,n)		waddnstr(stdscr,(s),(n))
-#define addch(ch)      		waddch(stdscr,(ch))
-
-#define mvwaddnstr(w,y,x,s,n) \
-  (-1 == wmove((w),(y),(x)) ? -1 : waddnstr((w),(s),(n)))
-#define mvwaddstr(w,y,x,s) \
-  (-1 == wmove((w),(y),(x)) ? -1 : waddnstr((w),(s), -1))
-#define mvaddnstr(y,x,s,n)	mvwaddnstr(stdscr,(y),(x),(s),(n))
-#define mvaddstr(y,x,s)       	mvwaddstr(stdscr,(y),(x),(s))
-#define mvwaddch(w,y,x,c) \
-  ((-1 == wmove((w),(y),(x))) ? -1 : waddch((w),(c)))
-#define mvaddch(y,x,c)         	mvwaddch(stdscr,(y),(x),(c))
-
-extern int SLcurses_wclear (SLcurses_Window_Type *w);
-extern int SLcurses_printw (char *, ...);
-
-#if 0
-/* Why are these functions part of curses??? */
-extern int SLcurses_mvwscanw (SLcurses_Window_Type *, unsigned int, unsigned int,
-			      char *, ...);
-extern int SLcurses_wscanw (SLcurses_Window_Type *, char *, ...);
-extern int SLcurses_scanw (char *, ...);
-#define mvwscanw SLcurses_mvwscanw
-#define wscanw SLcurses_wscanw
-#define scanw SLcurses_scanw
-#endif
-
-extern SLcurses_Window_Type *SLcurses_Stdscr;
-#define WINDOW SLcurses_Window_Type
-#define stdscr SLcurses_Stdscr
-
-#define subwin		SLcurses_subwin
-#define wclrtobot	SLcurses_wclrtobot
-#define wscrl		SLcurses_wscrl
-#define scrl(n)		wscrl(stdscr,(n))
-#define scroll(w)	wscrl((w),1)
-#define wrefresh	SLcurses_wrefresh
-#define delwin		SLcurses_delwin
-#define wmove		SLcurses_wmove
-#define newwin		SLcurses_newwin
-#define wnoutrefresh	SLcurses_wnoutrefresh
-#define werase(w)	SLcurses_wmove((w),0,0); SLcurses_wclrtobot(w)
-#define wclear(w)	SLcurses_wmove((w),0,0); SLcurses_wclrtobot(w)
-#define wprintw		SLcurses_wprintw
-#define mvwprintw	SLcurses_mvwprintw
-
-#define winch(w) \
-    ((((w)->_cury < (w)->nrows) && ((w)->_curx < (w)->ncols)) \
-       ? ((w)->lines[(w)->_cury][(w)->_curx]) : 0)
-
-#define inch() winch(stdscr)
-#define mvwinch(w,x,y) \
-    ((-1 != wmove((w),(x),(y))) ? winch(w) : (-1))
-#define doupdate SLsmg_refresh
-
-#define mvwin(w,a,b) ((w)->_begy = (a), (w)->_begx = (b))
-
-extern int SLcurses_mvprintw (int, int, char *, ...);
-extern int SLcurses_mvwprintw (SLcurses_Window_Type *, int, int, char *, ...);
-extern int SLcurses_has_colors(void);
-extern int SLcurses_nil (void);
-extern int SLcurses_wgetch (SLcurses_Window_Type *);
-extern int SLcurses_getch (void);
-
-extern int SLcurses_wattrset (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_wattron (SLcurses_Window_Type *, SLtt_Char_Type);
-extern int SLcurses_wattroff (SLcurses_Window_Type *, SLtt_Char_Type);
-#define attrset(x) SLcurses_wattrset(stdscr, (x))
-#define attron(x) SLcurses_wattron(stdscr, (x))
-#define attroff(x) SLcurses_wattroff(stdscr, (x))
-#define wattrset(w, x) SLcurses_wattrset((w), (x))
-#define wattron(w, x) SLcurses_wattron((w), (x))
-#define wattroff(w, x) SLcurses_wattroff((w), (x))
-#define wattr_get(w) ((w)->color << 8)
-#define attr_get() wattr_get(stdscr)
-
-#define COLOR_PAIR(x) ((x) << 8)
-
-extern int SLcurses_start_color (void);
-#define start_color SLcurses_start_color
-
-#define ERR 0xFFFF
-#define wgetch SLcurses_wgetch
-#define getch SLcurses_getch
-
-extern int SLcurses_nodelay (SLcurses_Window_Type *, int);
-extern SLcurses_Window_Type *SLcurses_initscr (void);
-#define initscr SLcurses_initscr
-
-extern int SLcurses_cbreak (void);
-extern int SLcurses_raw (void);
-#define cbreak SLcurses_cbreak
-#define crmode SLcurses_cbreak
-#define raw SLcurses_raw
-#define noraw SLang_reset_tty
-#define nocbreak SLang_reset_tty
-
-#define mvprintw SLcurses_mvprintw
-#define has_colors SLcurses_has_colors
-#define nodelay SLcurses_nodelay
-
-#define ungetch SLang_ungetkey
-
-#define COLS SLtt_Screen_Cols
-#define LINES SLtt_Screen_Rows
-
-#define move(x,y) SLcurses_wmove(stdscr, (x), (y))
-#define wclrtoeol SLcurses_wclrtoeol
-#define clrtoeol() SLcurses_wclrtoeol(stdscr)
-#define clrtobot() SLcurses_wclrtobot(stdscr)
-
-#define printw SLcurses_printw
-#define mvprintw SLcurses_mvprintw
-#define wstandout(w) SLcurses_wattrset((w),A_STANDOUT)
-#define wstandend(w) SLcurses_wattrset((w),A_NORMAL)
-#define standout() SLcurses_wattrset(stdscr,A_STANDOUT)
-#define standend() SLcurses_wattrset(stdscr,A_NORMAL)
-
-#define refresh() SLcurses_wrefresh(stdscr)
-#define clear() SLcurses_wclear(stdscr)
-#define erase() werase(stdscr)
-#define touchline SLsmg_touch_lines
-#define resetterm SLang_reset_tty
-
-extern int SLcurses_endwin (void);
-#define endwin SLcurses_endwin
-extern int SLcurses_Is_Endwin;
-#define isendwin() SLcurses_Is_Endwin
-
-#define keypad(w,x) ((w)->use_keypad = (x))
-
-#define KEY_MIN		SL_KEY_UP
-#define KEY_DOWN	SL_KEY_DOWN
-#define KEY_UP		SL_KEY_UP
-#define KEY_LEFT	SL_KEY_LEFT
-#define KEY_RIGHT	SL_KEY_RIGHT
-#define KEY_A1		SL_KEY_A1
-#define KEY_B1		SL_KEY_B1
-#define KEY_C1		SL_KEY_C1
-#define KEY_A2		SL_KEY_A2
-#define KEY_B2		SL_KEY_B2
-#define KEY_C2		SL_KEY_C2
-#define KEY_A3		SL_KEY_A3
-#define KEY_B3		SL_KEY_B3
-#define KEY_C3		SL_KEY_C3
-#define KEY_REDO	SL_KEY_REDO
-#define KEY_UNDO	SL_KEY_UNDO
-#define KEY_BACKSPACE	SL_KEY_BACKSPACE
-#define KEY_PPAGE	SL_KEY_PPAGE
-#define KEY_NPAGE	SL_KEY_NPAGE
-#define KEY_HOME	SL_KEY_HOME
-#define KEY_END		SL_KEY_END
-#define KEY_F0		SL_KEY_F0
-#define KEY_F		SL_KEY_F
-#define KEY_ENTER	SL_KEY_ENTER
-#define KEY_MAX		0xFFFF
-
-/* Ugly Hacks that may not work */
-#define flushinp SLcurses_nil
-#define winsertln(w) \
-  ((w)->scroll_min=(w)->_cury, \
-   (w)->scroll_max=(w)->nrows, \
-   wscrl((w), -1))
-
-extern SLtt_Char_Type SLcurses_Acs_Map [128];
-#define acs_map SLcurses_Acs_Map
-
-#define ACS_ULCORNER (acs_map[SLSMG_ULCORN_CHAR])
-#define ACS_URCORNER (acs_map[SLSMG_URCORN_CHAR])
-#define ACS_LRCORNER (acs_map[SLSMG_LRCORN_CHAR])
-#define ACS_LLCORNER (acs_map[SLSMG_LLCORN_CHAR])
-#define ACS_TTEE (acs_map[SLSMG_UTEE_CHAR])
-#define ACS_LTEE (acs_map[SLSMG_LTEE_CHAR])
-#define ACS_RTEE (acs_map[SLSMG_RTEE_CHAR])
-#define ACS_BTEE (acs_map[SLSMG_DTEE_CHAR])
-#define ACS_PLUS (acs_map[SLSMG_PLUS_CHAR])
-#define ACS_VLINE (acs_map[SLSMG_VLINE_CHAR])
-#define ACS_HLINE (acs_map[SLSMG_HLINE_CHAR])
-#define ACS_S1		'-'
-#define ACS_S9		'-'
-#define ACS_DIAMOND		'&'
-#define ACS_CKBOARD		(acs_map[SLSMG_CKBRD_CHAR])
-#define ACS_DEGREE		'o'
-#define ACS_PLMINUS		'+'
-#define ACS_BULLET		'*'
-#define ACS_LARROW		'<'
-#define ACS_RARROW		'>'
-#define ACS_DARROW		'v'
-#define ACS_UARROW		'^'
-#define ACS_BOARD		'#'
-#define ACS_LANTERN		'#'
-#define ACS_BLOCK		'#'
-
-#if 1
-#define hline(x,y) SLcurses_nil ()
-#define vline(x,y) SLcurses_nil ()
-#endif
-
-#define A_CHARTEXT	0x00FF
-#define A_NORMAL 0
-#define A_BOLD		0x1000
-#define A_REVERSE	0x2000
-#define A_STANDOUT	A_REVERSE
-#define A_UNDERLINE	0x4000
-#define A_BLINK		0
-#define A_COLOR		0x0700
-#define A_ALTCHARSET	0x8000
-#define A_DIM		0
-#define A_PROTECT	0
-#define A_INVIS		0
-
-#define COLOR_BLACK	SLSMG_COLOR_BLACK
-#define COLOR_RED	SLSMG_COLOR_RED
-#define COLOR_GREEN	SLSMG_COLOR_GREEN
-#define COLOR_YELLOW	SLSMG_COLOR_BROWN
-#define COLOR_BLUE	SLSMG_COLOR_BLUE
-#define COLOR_MAGENTA	SLSMG_COLOR_MAGENTA
-#define COLOR_CYAN	SLSMG_COLOR_CYAN
-#define COLOR_WHITE	SLSMG_COLOR_LGRAY
-
-extern int SLcurses_Num_Colors;
-#define COLORS		SLcurses_Num_Colors
-#define COLOR_PAIRS	(SLcurses_Num_Colors*SLcurses_Num_Colors)
-
-#define init_pair(_x,_f,_b) \
- SLtt_set_color_object((_x), ((_f) == (_b) ? 0x0700 : ((_f) | ((_b) << 8)) << 8))
-
-#define scrollok(a,b) ((a)->scroll_ok = (b))
-#define getyx(a,y,x)  (y=(a)->_cury, x=(a)->_curx)
-#define getmaxyx(a,y,x)  (y=(a)->nrows, x=(a)->ncols)
-#define napms(x) usleep(1000 * (x))
-typedef SLtt_Char_Type chtype;
-#define beep SLtt_beep
-#define curs_set(x) SLtt_set_cursor_visibility(x)
-#define touchwin(x) SLsmg_touch_lines((x)->_begy, (x)->nrows)
-#define flash SLtt_beep
-
-#define wsetscrreg(w,a,b)	((w)->scroll_min = (a), (w)->scroll_max = (b))
-
-#define wtimeout(a,b) (a)->delay_off = ((b >= 0) ? (b) / 100 : -1)
-#define timeout(a) wtimeout(stdscr, a)
-extern int SLcurses_wdelch (SLcurses_Window_Type *);
-#define wdelch SLcurses_wdelch
-#define delch() wdelch(stdscr)
-
-extern int SLcurses_winsch (SLcurses_Window_Type *, int);
-#define winsch SLcurses_winsch
-
-extern int SLcurses_Esc_Delay;/* ESC expire time in milliseconds (ncurses compatible) */
-#define ESCDELAY SLcurses_Esc_Delay
-
-extern int SLcurses_clearok (SLcurses_Window_Type *, int);
-#define clearok SLcurses_clearok
-
-/* Functions that have not been implemented. */
-#define copywin(w,v,a,b,c,d,e,f,g) SLcurses_nil()
-#define wdeleteln(win) SLcurses_nil()
-#define resetty SLcurses_nil
-#define savetty SLcurses_nil
-#define overlay(u,v) SLcurses_nil()
-
-/* These functions do nothing */
-#define savetty SLcurses_nil
-#define nonl    SLcurses_nil
-#define echo SLcurses_nil
-#define noecho SLcurses_nil
-#define saveterm SLcurses_nil
-#define box(w,y,z) ((w)->has_box = 1, (w)->modified = 1)
-#define leaveok(a,b) SLcurses_nil()
-#define nl() SLcurses_nil()
-#define trace(x) SLcurses_nil()
-#define tigetstr(x) NULL
-
-/* These have no place in C */
-#define TRUE 1
-#define FALSE 0
-#define bool int
-
-/* Lynx compatability */
-#else
-
-#define stdscr NULL
-#define COLS SLtt_Screen_Cols
-#define LINES SLtt_Screen_Rows
-#define move SLsmg_gotorc
-#define addstr SLsmg_write_string
-#define clear SLsmg_cls
-#define standout SLsmg_reverse_video
-#define standend  SLsmg_normal_video
-#define clrtoeol SLsmg_erase_eol
-#define scrollok(a,b) SLsmg_Newline_Moves = ((b) ? 1 : -1)
-#define addch SLsmg_write_char
-#define echo()
-#define printw SLsmg_printf
-#define endwin SLsmg_reset_smg(),SLang_reset_tty
-
-#endif
diff --git a/mdk-stage1/slang/sldisply.c b/mdk-stage1/slang/sldisply.c
deleted file mode 100644
index 1e1161774..000000000
--- a/mdk-stage1/slang/sldisply.c
+++ /dev/null
@@ -1,2596 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <time.h>
-#include <ctype.h>
-
-#if !defined(VMS) || (__VMS_VER >= 70000000)
-# include <sys/time.h>
-# ifdef __QNX__
-#  include <sys/select.h>
-# endif
-# include <sys/types.h>
-#endif
-
-#ifdef __BEOS__
-/* Prototype for select */
-# include <net/socket.h>
-#endif
-
-#ifdef HAVE_TERMIOS_H
-# include <termios.h>
-#endif
-
-#ifdef VMS
-# include <unixlib.h>
-# include <unixio.h>
-# include <dvidef.h>
-# include <descrip.h>
-# include <lib$routines.h>
-# include <starlet.h>
-#else
-# if !defined(sun)
-#  include <sys/ioctl.h>
-# endif
-#endif
-
-#ifdef SYSV
-# include <sys/termio.h>
-# include <sys/stream.h>
-# include <sys/ptem.h>
-# include <sys/tty.h>
-#endif
-
-#if defined (_AIX) && !defined (FD_SET)
-# include <sys/select.h>	/* for FD_ISSET, FD_SET, FD_ZERO */
-#endif
-
-#include <errno.h>
-
-#if defined(__DECC) && defined(VMS)
-/* These get prototypes for write an sleep */
-# include <unixio.h>
-#endif
-#include <signal.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Colors:  These definitions are used for the display.  However, the
- * application only uses object handles which get mapped to this
- * internal representation.  The mapping is performed by the Color_Map
- * structure below. */
-
-#define CHAR_MASK	0x000000FF
-#define FG_MASK		0x0000FF00
-#define BG_MASK		0x00FF0000
-#define ATTR_MASK	0x1F000000
-#define BGALL_MASK	0x0FFF0000
-
-/* The 0x10000000 bit represents the alternate character set.  BGALL_MASK does
- * not include this attribute.
- */
-
-#define GET_FG(color) ((color & FG_MASK) >> 8)
-#define GET_BG(color) ((color & BG_MASK) >> 16)
-#define MAKE_COLOR(fg, bg) (((fg) | ((bg) << 8)) << 8)
-
-int SLtt_Screen_Cols;
-int SLtt_Screen_Rows;
-int SLtt_Term_Cannot_Insert;
-int SLtt_Term_Cannot_Scroll;
-int SLtt_Use_Ansi_Colors;
-int SLtt_Blink_Mode = 1;
-int SLtt_Use_Blink_For_ACS = 0;
-int SLtt_Newline_Ok = 0;
-int SLtt_Has_Alt_Charset = 0;
-int SLtt_Force_Keypad_Init = 0;
-
-void (*_SLtt_color_changed_hook)(void);
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-static int Bce_Color_Offset = 0;
-#endif
-static int Can_Background_Color_Erase = 1;
-
-/* -1 means unknown */
-int SLtt_Has_Status_Line = -1;	       /* hs */
-int SLang_TT_Write_FD = -1;
-
-static int Automatic_Margins;
-/* static int No_Move_In_Standout; */
-static int Worthless_Highlight;
-#define HP_GLITCH_CODE
-#ifdef HP_GLITCH_CODE
-/* This glitch is exclusive to HP term.  Basically it means that to clear
- * attributes, one has to erase to the end of the line.
- */
-static int Has_HP_Glitch;
-#endif
-
-static char *Reset_Color_String;
-static int Is_Color_Terminal = 0;
-
-static int Linux_Console;
-
-/* It is crucial that JMAX_COLORS must be less than 128 since the high bit
- * is used to indicate a character from the ACS (alt char set).  The exception
- * to this rule is if SLtt_Use_Blink_For_ACS is true.  This means that of
- * the highbit is set, we interpret that as a blink character.  This is
- * exploited by DOSemu.
- */
-#define JMAX_COLORS 256
-#define JNORMAL_COLOR 0
-
-typedef struct
-{
-   SLtt_Char_Type fgbg;
-   SLtt_Char_Type mono;
-   char *custom_esc;
-}
-Ansi_Color_Type;
-
-#define RGB1(r, g, b)   ((r) | ((g) << 1) | ((b) << 2))
-#define RGB(r, g, b, br, bg, bb)  ((RGB1(r, g, b) << 8) | (RGB1(br, bg, bb) << 16))
-
-static Ansi_Color_Type Ansi_Color_Map[JMAX_COLORS] =
-{
-     {RGB(1, 1, 1, 0, 0, 0), 0x00000000, NULL},   /* white/black */
-     {RGB(0, 1, 0, 0, 0, 0), SLTT_REV_MASK, NULL},   /* green/black */
-     {RGB(1, 0, 1, 0, 0, 0), SLTT_REV_MASK, NULL},   /* magenta/black */
-     {RGB(0, 1, 1, 0, 0, 0), SLTT_REV_MASK, NULL},   /* cyan/black */
-     {RGB(1, 0, 0, 0, 0, 0), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 0, 0, 1), SLTT_REV_MASK, NULL},
-     {RGB(1, 0, 0, 0, 0, 1), SLTT_REV_MASK, NULL},
-     {RGB(1, 0, 0, 0, 1, 0), SLTT_REV_MASK, NULL},
-     {RGB(0, 0, 1, 1, 0, 0), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 0, 0), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 1, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(1, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(1, 0, 1, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 0, 0, 0, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL},
-     {RGB(0, 1, 0, 1, 1, 1), SLTT_REV_MASK, NULL}
-};
-
-static char *Color_Fg_Str = "\033[3%dm";
-static char *Color_Bg_Str = "\033[4%dm";
-static char *Default_Color_Fg_Str = "\033[39m";
-static char *Default_Color_Bg_Str = "\033[49m";
-
-static int Max_Terminfo_Colors = 8;	       /* termcap Co */
-
-char *SLtt_Graphics_Char_Pairs;	       /* ac termcap string -- def is vt100 */
-
-/* 1 if terminal lacks the ability to go into insert mode or into delete
-   mode. Currently controlled by S-Lang but later perhaps termcap. */
-
-static char *UnderLine_Vid_Str;
-static char *Blink_Vid_Str;
-static char *Bold_Vid_Str;
-static char *Ins_Mode_Str; /* = "\033[4h"; */   /* ins mode (im) */
-static char *Eins_Mode_Str; /* = "\033[4l"; */  /* end ins mode (ei) */
-static char *Scroll_R_Str; /* = "\033[%d;%dr"; */ /* scroll region */
-static char *Cls_Str; /* = "\033[2J\033[H"; */  /* cl termcap STR  for ansi terminals */
-static char *Rev_Vid_Str; /* = "\033[7m"; */    /* mr,so termcap string */
-static char *Norm_Vid_Str; /* = "\033[m"; */   /* me,se termcap string */
-static char *Del_Eol_Str; /* = "\033[K"; */	       /* ce */
-static char *Del_Bol_Str; /* = "\033[1K"; */	       /* cb */
-static char *Del_Char_Str; /* = "\033[P"; */   /* dc */
-static char *Del_N_Lines_Str; /* = "\033[%dM"; */  /* DL */
-static char *Add_N_Lines_Str; /* = "\033[%dL"; */  /* AL */
-static char *Rev_Scroll_Str;
-static char *Curs_Up_Str;
-static char *Curs_F_Str;    /* RI termcap string */
-static char *Cursor_Visible_Str;    /* ve termcap string */
-static char *Cursor_Invisible_Str;    /* vi termcap string */
-#if 0
-static char *Start_Mouse_Rpt_Str;  /* Start mouse reporting mode */
-static char *End_Mouse_Rpt_Str;  /* End mouse reporting mode */
-#endif
-static char *Start_Alt_Chars_Str;  /* as */
-static char *End_Alt_Chars_Str;   /* ae */
-static char *Enable_Alt_Char_Set;  /* eA */
-
-static char *Term_Init_Str;
-static char *Keypad_Init_Str;
-static char *Term_Reset_Str;
-static char *Keypad_Reset_Str;
-
-/* status line functions */
-static char *Disable_Status_line_Str;  /* ds */
-static char *Return_From_Status_Line_Str;   /* fs */
-static char *Goto_Status_Line_Str;     /* ts */
-static int Num_Status_Line_Columns;    /* ws */
-/* static int Status_Line_Esc_Ok;	 */       /* es */
-
-/* static int Len_Curs_F_Str = 5; */
-
-/* cm string has %i%d since termcap numbers columns from 0 */
-/* char *CURS_POS_STR = "\033[%d;%df";  ansi-- hor and vert pos */
-static char *Curs_Pos_Str; /* = "\033[%i%d;%dH";*/   /* cm termcap string */
-
-/* scrolling region */
-static int Scroll_r1 = 0, Scroll_r2 = 23;
-static int Cursor_r, Cursor_c;	       /* 0 based */
-
-/* current attributes --- initialized to impossible value */
-static SLtt_Char_Type Current_Fgbg = 0xFFFFFFFFU;
-
-static int Cursor_Set;		       /* 1 if cursor position known, 0
-					* if not.  -1 if only row is known
-					*/
-
-#define MAX_OUTPUT_BUFFER_SIZE 4096
-
-static unsigned char Output_Buffer[MAX_OUTPUT_BUFFER_SIZE];
-static unsigned char *Output_Bufferp = Output_Buffer;
-
-unsigned long SLtt_Num_Chars_Output;
-
-int _SLusleep (unsigned long usecs)
-{
-#if !defined(VMS) || (__VMS_VER >= 70000000)
-   struct timeval tv;
-   tv.tv_sec = usecs / 1000000;
-   tv.tv_usec = usecs % 1000000;
-   return select(0, NULL, NULL, NULL, &tv);
-#else
-   return 0;
-#endif
-}
-
-int SLtt_flush_output (void)
-{
-   int nwrite = 0;
-   unsigned int total;
-   int n = (int) (Output_Bufferp - Output_Buffer);
-
-   SLtt_Num_Chars_Output += n;
-
-   total = 0;
-   while (n > 0)
-     {
-	nwrite = write (SLang_TT_Write_FD, (char *) Output_Buffer + total, n);
-	if (nwrite == -1)
-	  {
-	     nwrite = 0;
-#ifdef EAGAIN
-	     if (errno == EAGAIN)
-	       {
-		  _SLusleep (100000);   /* 1/10 sec */
-		  continue;
-	       }
-#endif
-#ifdef EWOULDBLOCK
-	     if (errno == EWOULDBLOCK)
-	       {
-		  _SLusleep (100000);
-		  continue;
-	       }
-#endif
-#ifdef EINTR
-	     if (errno == EINTR) continue;
-#endif
-	     break;
-	  }
-	n -= nwrite;
-	total += nwrite;
-     }
-   Output_Bufferp = Output_Buffer;
-   return n;
-}
-
-int SLtt_Baud_Rate;
-static void tt_write(char *str, unsigned int n)
-{
-   static unsigned long last_time;
-   static int total;
-   unsigned long now;
-   unsigned int ndiff;
-
-   if ((str == NULL) || (n == 0)) return;
-   total += n;
-
-   while (1)
-     {
-	ndiff = MAX_OUTPUT_BUFFER_SIZE - (int) (Output_Bufferp - Output_Buffer);
-	if (ndiff < n)
-	  {
-	     SLMEMCPY ((char *) Output_Bufferp, (char *) str, ndiff);
-	     Output_Bufferp += ndiff;
-	     SLtt_flush_output ();
-	     n -= ndiff;
-	     str += ndiff;
-	  }
-	else
-	  {
-	     SLMEMCPY ((char *) Output_Bufferp, str, n);
-	     Output_Bufferp += n;
-	     break;
-	  }
-     }
-
-   if (((SLtt_Baud_Rate > 150) && (SLtt_Baud_Rate <= 9600))
-       && (10 * total > SLtt_Baud_Rate))
-     {
-	total = 0;
-	if ((now = (unsigned long) time(NULL)) - last_time <= 1)
-	  {
-	     SLtt_flush_output ();
-	     sleep((unsigned) 1);
-	  }
-	last_time = now;
-     }
-}
-
-static void tt_write_string (char *str)
-{
-   if (str != NULL) tt_write(str, strlen(str));
-}
-
-void SLtt_write_string (char *str)
-{
-   tt_write_string (str);
-   Cursor_Set = 0;
-}
-
-void SLtt_putchar (char ch)
-{
-   SLtt_normal_video ();
-   if (Cursor_Set == 1)
-     {
-	if (ch >= ' ') Cursor_c++;
-	else if (ch == '\b') Cursor_c--;
-	else if (ch == '\r') Cursor_c = 0;
-	else Cursor_Set = 0;
-
-	if ((Cursor_c + 1 == SLtt_Screen_Cols)
-	    && Automatic_Margins) Cursor_Set = 0;
-     }
-
-   if (Output_Bufferp < Output_Buffer + MAX_OUTPUT_BUFFER_SIZE)
-     {
-	*Output_Bufferp++ = (unsigned char) ch;
-     }
-   else tt_write (&ch, 1);
-}
-
-static unsigned int tt_sprintf(char *buf, char *fmt, int x, int y)
-{
-   char *fmt_max;
-   register unsigned char *b, ch;
-   int offset;
-   int z, z1, parse_level;
-   int zero_pad;
-   int field_width;
-   int variables [26];
-   int stack [64];
-   unsigned int stack_len;
-   int parms [10];
-#define STACK_POP (stack_len ? stack[--stack_len] : 0)
-
-   if (fmt == NULL)
-     {
-	*buf = 0;
-	return 0;
-     }
-
-   stack [0] = y;	       /* pushed for termcap */
-   stack [1] = x;
-   stack_len = 2;
-
-   parms [1] = x;	       /* p1 */
-   parms [2] = y;	       /* p2 */
-
-   offset = 0;
-   zero_pad = 0;
-   field_width = 0;
-
-   b = (unsigned char *) buf;
-   fmt_max = fmt + strlen (fmt);
-
-   while (fmt < fmt_max)
-     {
-	ch = *fmt++;
-
-	if (ch != '%')
-	  {
-	     *b++ = ch;
-	     continue;
-	  }
-
-	if (fmt == fmt_max) break;
-	ch = *fmt++;
-
-	switch (ch)
-	  {
-	   default:
-	     *b++ = ch;
-	     break;
-
-	   case 'p':
-
-	     if (fmt == fmt_max) break;
-	     ch = *fmt++;
-	     if ((ch >= '0') && (ch <= '9'))
-	       stack [stack_len++] = parms [ch - '0'];
-	     break;
-
-	   case '\'':   /* 'x' */
-	     if (fmt == fmt_max) break;
-	     stack [stack_len++] = *fmt++;
-	     if (fmt < fmt_max) fmt++;     /* skip ' */
-	     break;
-
-	   case '{':	       /* literal constant, e.g. {30} */
-	     z = 0;
-	     while ((fmt < fmt_max) && ((ch = *fmt) <= '9') && (ch >= '0'))
-	       {
-		  z = z * 10 + (ch - '0');
-		  fmt++;
-	       }
-	     stack [stack_len++] = z;
-	     if ((ch == '}') && (fmt < fmt_max)) fmt++;
-	     break;
-
-	   case '0':
-	     if (fmt == fmt_max) break;
-	     ch = *fmt;
-	     if ((ch != '2') && (ch != '3'))
-	       break;
-	     zero_pad = 1;
-	     fmt++;
-	     /* drop */
-
-	   case '2':
-	   case '3':
-	     if (fmt == fmt_max)
-	     if (*fmt == 'x')
-	       {
-		  char x_fmt_buf [4];
-		  char *x_fmt_buf_ptr;
-
-		  x_fmt_buf_ptr = x_fmt_buf;
-		  if (zero_pad) *x_fmt_buf_ptr++ = '0';
-		  *x_fmt_buf_ptr++ = ch;
-		  *x_fmt_buf_ptr++ = 'X';
-		  *x_fmt_buf_ptr = 0;
-
-		  z = STACK_POP;
-		  z += offset;
-
-		  sprintf ((char *)b, x_fmt_buf, z);
-		  b += strlen ((char *)b);
-		  zero_pad = 0;
-		  break;
-	       }
-
-	     field_width = (ch - '0');
-		  /* drop */
-
-	   case 'd':
-	     z = STACK_POP;
-	     z += offset;
-	     if (z >= 100)
-	       {
-		  *b++ = z / 100 + '0';
-		  z = z % 100;
-		  zero_pad = 1;
-		  field_width = 2;
-	       }
-	     else if (zero_pad && (field_width == 3))
-	       *b++ = '0';
-
-	     if (z >= 10)
-	       {
-		  *b++ = z / 10 + '0';
-		  z = z % 10;
-	       }
-	     else if (zero_pad && (field_width >= 2))
-	       *b++ = '0';
-
-	     *b++ = z + '0';
-	     field_width = zero_pad = 0;
-	     break;
-
-	   case 'x':
-	     z = STACK_POP;
-	     z += offset;
-	     sprintf ((char *) b, "%X", z);
-	     b += strlen ((char *)b);
-	     break;
-
-	   case 'i':
-	     offset = 1;
-	     break;
-
-	   case '+':
-	     /* Handling this depends upon whether or not we are parsing
-	      * terminfo.  Terminfo requires the stack so use it as an
-	      * indicator.
-	      */
-	     if (stack_len > 2)
-	       {
-		  z = STACK_POP;
-		  stack [stack_len - 1] += z;
-	       }
-	     else if (fmt < fmt_max)
-	       {
-		  ch = *fmt++;
-		  if ((unsigned char) ch == 128) ch = 0;
-		  ch = ch + (unsigned char) STACK_POP;
-		  if (ch == '\n') ch++;
-		  *b++ = ch;
-	       }
-	     break;
-
-	     /* Binary operators */
-	   case '-':
-	   case '*':
-	   case '/':
-	   case 'm':
-	   case '&':
-	   case '|':
-	   case '^':
-	   case '=':
-	   case '>':
-	   case '<':
-	   case 'A':
-	   case 'O':
-	     z1 = STACK_POP;
-	     z = STACK_POP;
-	     switch (ch)
-	       {
-		case '-': z = (z - z1); break;
-		case '*': z = (z * z1); break;
-		case '/': z = (z / z1); break;
-		case 'm': z = (z % z1); break;
-		case '&': z = (z & z1); break;
-		case '|': z = (z | z1); break;
-		case '^': z = (z ^ z1); break;
-		case '=': z = (z == z1); break;
-		case '>': z = (z > z1); break;
-		case '<': z = (z < z1); break;
-		case 'A': z = (z && z1); break;
-		case 'O': z = (z || z1); break;
-	       }
-	     stack [stack_len++] = z;
-	     break;
-
-	     /* unary */
-	   case '!':
-	     z = STACK_POP;
-	     stack [stack_len++] = !z;
-	     break;
-
-	   case '~':
-	     z = STACK_POP;
-	     stack [stack_len++] = ~z;
-	     break;
-
-	   case 'r':		       /* termcap -- swap parameters */
-	     z = stack [0];
-	     stack [0] = stack [1];
-	     stack [1] = z;
-	     break;
-
-	   case '.':		       /* termcap */
-	   case 'c':
-	     ch = (unsigned char) STACK_POP;
-	     if (ch == '\n') ch++;
-	     *b++ = ch;
-	     break;
-
-	   case 'g':
-	     if (fmt == fmt_max) break;
-	     ch = *fmt++;
-	     if ((ch >= 'a') && (ch <= 'z'))
-	       stack [stack_len++] = variables [ch - 'a'];
-	     break;
-
-	   case 'P':
-	     if (fmt == fmt_max) break;
-	     ch = *fmt++;
-	     if ((ch >= 'a') && (ch <= 'z'))
-	       variables [ch - 'a'] = STACK_POP;
-	     break;
-
-	     /* If then else parsing.  Actually, this is rather easy.  The
-	      * key is to notice that 'then' does all the work.  'if' simply
-	      * there to indicate the start of a test and endif indicates
-	      * the end of tests.  If 'else' is seen, then skip to
-	      * endif.
-	      */
-	   case '?':		       /* if */
-	   case ';':		       /* endif */
-	     break;
-
-	   case 't':		       /* then */
-	     z = STACK_POP;
-	     if (z != 0)
-	       break;		       /* good.  Continue parsing. */
-
-	     /* z == 0 and test has failed.  So, skip past this entire if
-	      * expression to the matching else or matching endif.
-	      */
-	     /* drop */
-	   case 'e':		       /* else */
-
-	     parse_level = 0;
-	     while (fmt < fmt_max)
-	       {
-		  unsigned char ch1;
-
-		  ch1 = *fmt++;
-		  if ((ch1 != '%') || (fmt == fmt_max))
-		    continue;
-
-		  ch1 = *fmt++;
-
-		  if (ch1 == '?') parse_level++;   /* new if */
-		  else if (ch1 == 'e')
-		    {
-		       if ((ch != 'e') && (parse_level == 0))
-			 break;
-		    }
-		  else if (ch1 == ';')
-		    {
-		       if (parse_level == 0)
-			 break;
-		       parse_level--;
-		    }
-	       }
-	     break;
-	  }
-     }
-   *b = 0;
-   return (unsigned int) (b - (unsigned char *) buf);
-}
-
-static void tt_printf(char *fmt, int x, int y)
-{
-   char buf[1024];
-   unsigned int n;
-   if (fmt == NULL) return;
-   n = tt_sprintf(buf, fmt, x, y);
-   tt_write(buf, n);
-}
-
-void SLtt_set_scroll_region (int r1, int r2)
-{
-   Scroll_r1 = r1;
-   Scroll_r2 = r2;
-   tt_printf (Scroll_R_Str, Scroll_r1, Scroll_r2);
-   Cursor_Set = 0;
-}
-
-void SLtt_reset_scroll_region (void)
-{
-   SLtt_set_scroll_region(0, SLtt_Screen_Rows - 1);
-}
-
-int SLtt_set_cursor_visibility (int show)
-{
-   if ((Cursor_Visible_Str == NULL) || (Cursor_Invisible_Str == NULL))
-     return -1;
-
-   tt_write_string (show ? Cursor_Visible_Str : Cursor_Invisible_Str);
-   return 0;
-}
-
-/* the goto_rc function moves to row relative to scrolling region */
-void SLtt_goto_rc(int r, int c)
-{
-   char *s = NULL;
-   int n;
-   char buf[6];
-
-   if ((c < 0) || (r < 0))
-     {
-	Cursor_Set = 0;
-	return;
-     }
-
-   /* if (No_Move_In_Standout && Current_Fgbg) SLtt_normal_video (); */
-   r += Scroll_r1;
-
-   if ((Cursor_Set > 0) || ((Cursor_Set < 0) && !Automatic_Margins))
-     {
-	n = r - Cursor_r;
-	if ((n == -1) && (Cursor_Set > 0) && (Cursor_c == c)
-	    && (Curs_Up_Str != NULL))
-	  {
-	     s = Curs_Up_Str;
-	  }
-	else if ((n >= 0) && (n <= 4))
-	  {
-	     if ((n == 0) && (Cursor_Set == 1)
-		 && ((c > 1) || (c == Cursor_c)))
-	       {
-		  if (Cursor_c == c) return;
-		  if (Cursor_c == c + 1)
-		    {
-		       s = buf;
-		       *s++ = '\b'; *s = 0;
-		       s = buf;
-		    }
-	       }
-	     else if (c == 0)
-	       {
-		  s = buf;
-		  if ((Cursor_Set != 1) || (Cursor_c != 0)) *s++ = '\r';
-		  while (n--) *s++ = '\n';
-#ifdef VMS
-		  /* Need to add this after \n to start a new record.  Sheesh. */
-		  *s++ = '\r';
-#endif
-		  *s = 0;
-		  s = buf;
-	       }
-	     /* Will fail on VMS */
-#ifndef VMS
-	     else if (SLtt_Newline_Ok && (Cursor_Set == 1) &&
-		      (Cursor_c >= c) && (c + 3 > Cursor_c))
-	       {
-		  s = buf;
-		  while (n--) *s++ = '\n';
-		  n = Cursor_c - c;
-		  while (n--) *s++ = '\b';
-		  *s = 0;
-		  s = buf;
-	       }
-#endif
-	  }
-     }
-   if (s != NULL) tt_write_string(s);
-   else tt_printf(Curs_Pos_Str, r, c);
-   Cursor_c = c; Cursor_r = r;
-   Cursor_Set = 1;
-}
-
-void SLtt_begin_insert (void)
-{
-   tt_write_string(Ins_Mode_Str);
-}
-
-void SLtt_end_insert (void)
-{
-   tt_write_string(Eins_Mode_Str);
-}
-
-void SLtt_delete_char (void)
-{
-   SLtt_normal_video ();
-   tt_write_string(Del_Char_Str);
-}
-
-void SLtt_erase_line (void)
-{
-   tt_write_string("\r");
-   Cursor_Set = 1; Cursor_c = 0;
-   SLtt_del_eol();
-}
-
-/* It appears that the Linux console, and most likely others do not
- * like scrolling regions that consist of one line.  So I have to
- * resort to this stupidity to make up for that stupidity.
- */
-static void delete_line_in_scroll_region (void)
-{
-   SLtt_goto_rc (Cursor_r - Scroll_r1, 0);
-   SLtt_del_eol ();
-}
-
-void SLtt_delete_nlines (int n)
-{
-   int r1, curs;
-   char buf[132];
-
-   if (n <= 0) return;
-   SLtt_normal_video ();
-
-   if (Scroll_r1 == Scroll_r2)
-     {
-	delete_line_in_scroll_region ();
-	return;
-     }
-
-   if (Del_N_Lines_Str != NULL) tt_printf(Del_N_Lines_Str,n, 0);
-   else
-   /* get a new terminal */
-     {
-	r1 = Scroll_r1;
-	curs = Cursor_r;
-	SLtt_set_scroll_region(curs, Scroll_r2);
-	SLtt_goto_rc(Scroll_r2 - Scroll_r1, 0);
-	SLMEMSET(buf, '\n', (unsigned int) n);
-	tt_write(buf, (unsigned int) n);
-	/* while (n--) tt_putchar('\n'); */
-	SLtt_set_scroll_region(r1, Scroll_r2);
-	SLtt_goto_rc(curs, 0);
-     }
-}
-
-void SLtt_cls (void)
-{
-   /* If the terminal is a color terminal but the user wants black and 
-    * white, then make sure that the colors are reset.  This appears to be
-    * necessary.
-    */
-   if ((SLtt_Use_Ansi_Colors == 0) && Is_Color_Terminal)
-     {
-	if (Reset_Color_String != NULL)
-	  tt_write_string (Reset_Color_String);
-	else
-	  tt_write_string ("\033[0m\033[m");
-     }
-
-   SLtt_normal_video();
-   SLtt_reset_scroll_region ();
-   tt_write_string(Cls_Str);
-}
-
-void SLtt_reverse_index (int n)
-{
-   if (!n) return;
-
-   SLtt_normal_video();
-
-   if (Scroll_r1 == Scroll_r2)
-     {
-	delete_line_in_scroll_region ();
-	return;
-     }
-
-   if (Add_N_Lines_Str != NULL) tt_printf(Add_N_Lines_Str,n, 0);
-   else
-     {
-	while(n--) tt_write_string(Rev_Scroll_Str);
-     }
-}
-
-int SLtt_Ignore_Beep = 1;
-static char *Visible_Bell_Str;
-
-void SLtt_beep (void)
-{
-   if (SLtt_Ignore_Beep & 0x1) SLtt_putchar('\007');
-
-   if (SLtt_Ignore_Beep & 0x2)
-     {
-	if (Visible_Bell_Str != NULL) tt_write_string (Visible_Bell_Str);
-#ifdef __linux__
-	else if (Linux_Console)
-	  {
-	     tt_write_string ("\033[?5h");
-	     SLtt_flush_output ();
-	     _SLusleep (50000);
-	     tt_write_string ("\033[?5l");
-	  }
-#endif
-     }
-   SLtt_flush_output ();
-}
-
-static void del_eol (void)
-{
-   int c;
-
-   if (Del_Eol_Str != NULL)
-     {
-	tt_write_string(Del_Eol_Str);
-	return;
-     }
-
-   c = Cursor_c;
-   /* Avoid writing to the lower right corner.  If the terminal does not
-    * have Del_Eol_Str, then it probably does not have what it takes to play
-    * games with insert for for a space into that corner.
-    */
-   if (Cursor_r + 1 < SLtt_Screen_Rows)
-     c++;
-
-   while (c < SLtt_Screen_Cols)
-     {
-	tt_write (" ", 1);
-	c++;
-     }
-}
-
-void SLtt_del_eol (void)
-{
-   if (Current_Fgbg != 0xFFFFFFFFU) SLtt_normal_video ();
-   del_eol ();
-}
-
-typedef struct
-{
-   char *name;
-   SLtt_Char_Type color;
-}
-Color_Def_Type;
-
-#define MAX_COLOR_NAMES 17
-static Color_Def_Type Color_Defs [MAX_COLOR_NAMES] =
-{
-     {"black",		SLSMG_COLOR_BLACK},
-     {"red",		SLSMG_COLOR_RED},
-     {"green",		SLSMG_COLOR_GREEN},
-     {"brown",		SLSMG_COLOR_BROWN},
-     {"blue",		SLSMG_COLOR_BLUE},
-     {"magenta",	SLSMG_COLOR_MAGENTA},
-     {"cyan",		SLSMG_COLOR_CYAN},
-     {"lightgray",	SLSMG_COLOR_LGRAY},
-     {"gray",		SLSMG_COLOR_GRAY},
-     {"brightred",	SLSMG_COLOR_BRIGHT_RED},
-     {"brightgreen",	SLSMG_COLOR_BRIGHT_GREEN},
-     {"yellow",		SLSMG_COLOR_BRIGHT_BROWN},
-     {"brightblue",	SLSMG_COLOR_BRIGHT_BLUE},
-     {"brightmagenta",	SLSMG_COLOR_BRIGHT_CYAN},
-     {"brightcyan",	SLSMG_COLOR_BRIGHT_MAGENTA},
-     {"white",		SLSMG_COLOR_BRIGHT_WHITE},
-#define SLSMG_COLOR_DEFAULT 0xFF
-     {"default",		SLSMG_COLOR_DEFAULT}
-};
-
-void SLtt_set_mono (int obj, char *what, SLtt_Char_Type mask)
-{
-   (void) what;
-   if ((obj < 0) || (obj >= JMAX_COLORS))
-     {
-	return;
-     }
-   Ansi_Color_Map[obj].mono = mask & ATTR_MASK;
-}
-
-static char *check_color_for_digit_form (char *color)
-{
-   unsigned int i, ich;
-   char *s = color;
-
-   i = 0;
-   while ((ich = (int) *s) != 0)
-     {
-	if ((ich < '0') || (ich > '9'))
-	  return color;
-
-	i = i * 10 + (ich - '0');
-	s++;
-     }
-
-   if (i < MAX_COLOR_NAMES)
-     color = Color_Defs[i].name;
-
-   return color;
-}
-
-static int get_default_colors (char **fgp, char **bgp)
-{
-   static char fg_buf[16], bg_buf[16], *bg, *fg;
-   static int already_parsed;
-   char *p, *pmax;
-
-   if (already_parsed == -1)
-     return -1;
-
-   if (already_parsed)
-     {
-	*fgp = fg;
-	*bgp = bg;
-	return 0;
-     }
-
-   already_parsed = -1;
-
-   bg = getenv ("COLORFGBG");
-
-   if (bg == NULL)
-     {
-	bg = getenv ("DEFAULT_COLORS");
-	if (bg == NULL)
-	  return -1;
-     }
-
-   p = fg_buf;
-   pmax = p + (sizeof (fg_buf) - 1);
-
-   while ((*bg != 0) && (*bg != ';'))
-     {
-	if (p < pmax) *p++ = *bg;
-	bg++;
-     }
-   *p = 0;
-
-   if (*bg) bg++;
-
-   p = bg_buf;
-   pmax = p + (sizeof (bg_buf) - 1);
-
-   /* Mark suggested allowing for extra spplication specific stuff following
-    * the background color.  That is what the check for the semi-colon is for.
-    */
-   while ((*bg != 0) && (*bg != ';'))
-     {
-	if (p < pmax) *p++ = *bg;
-	bg++;
-     }
-   *p = 0;
-
-   if (!strcmp (fg_buf, "default") || !strcmp(bg_buf, "default"))
-     {
-	*fgp = *bgp = fg = bg = "default";
-     }
-   else
-     {
-	*fgp = fg = check_color_for_digit_form (fg_buf);
-	*bgp = bg = check_color_for_digit_form (bg_buf);
-     }
-   already_parsed = 1;
-   return 0;
-}
-
-static unsigned char FgBg_Stats[JMAX_COLORS];
-
-static int Color_0_Modified = 0;
-
-void SLtt_set_color_object (int obj, SLtt_Char_Type attr)
-{
-   char *cust_esc;
-
-   if ((obj < 0) || (obj >= JMAX_COLORS)) return;
-
-   cust_esc = Ansi_Color_Map[obj].custom_esc;
-   if (cust_esc != NULL)
-     {
-	SLfree (cust_esc);
-	FgBg_Stats[(Ansi_Color_Map[obj].fgbg >> 8) & 0x7F] -= 1;
-	Ansi_Color_Map[obj].custom_esc = NULL;
-     }
-
-   Ansi_Color_Map[obj].fgbg = attr;
-   if (obj == 0) Color_0_Modified = 1;
-
-   if (_SLtt_color_changed_hook != NULL)
-     (*_SLtt_color_changed_hook)();
-}
-
-SLtt_Char_Type SLtt_get_color_object (int obj)
-{
-   if ((obj < 0) || (obj >= JMAX_COLORS)) return 0;
-   return Ansi_Color_Map[obj].fgbg;
-}
-
-void SLtt_add_color_attribute (int obj, SLtt_Char_Type attr)
-{
-   if ((obj < 0) || (obj >= JMAX_COLORS)) return;
-
-   Ansi_Color_Map[obj].fgbg |= (attr & ATTR_MASK);
-   if (obj == 0) Color_0_Modified = 1;
-   if (_SLtt_color_changed_hook != NULL)
-     (*_SLtt_color_changed_hook)();
-}
-
-static SLtt_Char_Type fb_to_fgbg (SLtt_Char_Type f, SLtt_Char_Type b)
-{
-   SLtt_Char_Type attr;
-
-   if (Max_Terminfo_Colors != 8)
-     {
-	if (f != SLSMG_COLOR_DEFAULT) f %= Max_Terminfo_Colors;
-	if (b != SLSMG_COLOR_DEFAULT) b %= Max_Terminfo_Colors;
-	return ((f << 8) | (b << 16));
-     }
-
-   /* Otherwise we have 8 ansi colors.  Try to get bright versions
-    * by using the BOLD and BLINK attributes.
-    */
-
-   attr = 0;
-
-   /* Note:  If f represents default, it will have the value 0xFF */
-   if (f != SLSMG_COLOR_DEFAULT)
-     {
-	if (f & 0x8) attr = SLTT_BOLD_MASK;
-	f &= 0x7;
-     }
-
-   if (b != SLSMG_COLOR_DEFAULT)
-     {
-	if (b & 0x8) attr |= SLTT_BLINK_MASK;
-	b &= 0x7;
-     }
-
-   return ((f << 8) | (b << 16) | attr);
-}
-
-/* This looks for colors with name form 'colorN'.  If color is of this
- * form, N is passed back via paramter list.
- */
-static int parse_color_digit_name (char *color, SLtt_Char_Type *f)
-{
-   unsigned int i;
-   unsigned char ch;
-
-   if (strncmp (color, "color", 5))
-     return -1;
-
-   color += 5;
-   if (*color == 0)
-     return -1;
-
-   i = 0;
-   while (1)
-     {
-	ch = (unsigned char) *color++;
-	if (ch == 0)
-	  break;
-	if ((ch > '9') || (ch < '0'))
-	  return -1;
-	i = 10 * i + (ch - '0');
-     }
-
-   *f = (SLtt_Char_Type) i;
-   return 0;
-}
-
-static int make_color_fgbg (char *fg, char *bg, SLtt_Char_Type *fgbg)
-{
-   SLtt_Char_Type f = 0xFFFFFFFFU, b = 0xFFFFFFFFU;
-   char *dfg, *dbg;
-   unsigned int i;
-
-   if ((fg != NULL) && (*fg == 0)) fg = NULL;
-   if ((bg != NULL) && (*bg == 0)) bg = NULL;
-
-   if ((fg == NULL) || (bg == NULL))
-     {
-	if (-1 == get_default_colors (&dfg, &dbg))
-	  return -1;
-
-	if (fg == NULL) fg = dfg;
-	if (bg == NULL) bg = dbg;
-     }
-
-   if (-1 == parse_color_digit_name (fg, &f))
-     {
-	for (i = 0; i < MAX_COLOR_NAMES; i++)
-	  {
-	     if (strcmp(fg, Color_Defs[i].name)) continue;
-	     f = Color_Defs[i].color;
-	     break;
-	  }
-     }
-
-   if (-1 == parse_color_digit_name (bg, &b))
-     {
-	for (i = 0; i < MAX_COLOR_NAMES; i++)
-	  {
-	     if (strcmp(bg, Color_Defs[i].name)) continue;
-	     b = Color_Defs[i].color;
-	     break;
-	  }
-     }
-
-   if ((f == 0xFFFFFFFFU) || (b == 0xFFFFFFFFU))
-     return -1;
-
-   *fgbg = fb_to_fgbg (f, b);
-   return 0;
-}
-
-void SLtt_set_color (int obj, char *what, char *fg, char *bg)
-{
-   SLtt_Char_Type fgbg;
-
-   (void) what;
-   if ((obj < 0) || (obj >= JMAX_COLORS))
-     return;
-
-   if (-1 != make_color_fgbg (fg, bg, &fgbg))
-     SLtt_set_color_object (obj, fgbg);
-}
-
-void SLtt_set_color_fgbg (int obj, SLtt_Char_Type f, SLtt_Char_Type b)
-{
-   SLtt_set_color_object (obj, fb_to_fgbg (f, b));
-}
-
-void SLtt_set_color_esc (int obj, char *esc)
-{
-   char *cust_esc;
-   SLtt_Char_Type fgbg = 0;
-   int i;
-
-   if ((obj < 0) || (obj >= JMAX_COLORS))
-     {
-	return;
-     }
-
-   cust_esc = Ansi_Color_Map[obj].custom_esc;
-   if (cust_esc != NULL)
-     {
-	SLfree (cust_esc);
-	FgBg_Stats[(Ansi_Color_Map[obj].fgbg >> 8) & 0x7F] -= 1;
-     }
-
-   cust_esc = (char *) SLmalloc (strlen(esc) + 1);
-   if (cust_esc != NULL) strcpy (cust_esc, esc);
-
-   Ansi_Color_Map[obj].custom_esc = cust_esc;
-   if (cust_esc == NULL) fgbg = 0;
-   else
-     {
-	/* The whole point of this is to generate a unique fgbg */
-	for (i = 0; i < JMAX_COLORS; i++)
-	  {
-	     if (FgBg_Stats[i] == 0) fgbg = i;
-
-	     if (obj == i) continue;
-	     if ((Ansi_Color_Map[i].custom_esc) == NULL) continue;
-	     if (!strcmp (Ansi_Color_Map[i].custom_esc, cust_esc))
-	       {
-		  fgbg = (Ansi_Color_Map[i].fgbg >> 8) & 0x7F;
-		  break;
-	       }
-	  }
-	FgBg_Stats[fgbg] += 1;
-     }
-
-   fgbg |= 0x80;
-   Ansi_Color_Map[obj].fgbg = (fgbg | (fgbg << 8)) << 8;
-   if (obj == 0) Color_0_Modified = 1;
-   if (_SLtt_color_changed_hook != NULL)
-     (*_SLtt_color_changed_hook)();
-}
-
-void SLtt_set_alt_char_set (int i)
-{
-   static int last_i;
-   if (SLtt_Has_Alt_Charset == 0) return;
-   if (i == last_i) return;
-   tt_write_string (i ? Start_Alt_Chars_Str : End_Alt_Chars_Str );
-   last_i = i;
-}
-
-static void write_attributes (SLtt_Char_Type fgbg)
-{
-   int bg0, fg0;
-   int unknown_attributes;
-
-   if (Worthless_Highlight) return;
-   if (fgbg == Current_Fgbg) return;
-
-   unknown_attributes = 0;
-
-   /* Before spitting out colors, fix attributes */
-   if ((fgbg & ATTR_MASK) != (Current_Fgbg & ATTR_MASK))
-     {
-	if (Current_Fgbg & ATTR_MASK)
-	  {
-	     tt_write_string(Norm_Vid_Str);
-	     /* In case normal video turns off ALL attributes: */
-	     if (fgbg & SLTT_ALTC_MASK)
-	       Current_Fgbg &= ~SLTT_ALTC_MASK;
-	     SLtt_set_alt_char_set (0);
-	  }
-
-	if ((fgbg & SLTT_ALTC_MASK)
-	    != (Current_Fgbg & SLTT_ALTC_MASK))
-	  {
-	     SLtt_set_alt_char_set ((int) (fgbg & SLTT_ALTC_MASK));
-	  }
-
-	if (fgbg & SLTT_ULINE_MASK) tt_write_string (UnderLine_Vid_Str);
-	if (fgbg & SLTT_BOLD_MASK) SLtt_bold_video ();
-	if (fgbg & SLTT_REV_MASK) tt_write_string (Rev_Vid_Str);
-	if (fgbg & SLTT_BLINK_MASK)
-	  {
-	     /* Someday Linux will have a blink mode that set high intensity
-	      * background.  Lets be prepared.
-	      */
-	     if (SLtt_Blink_Mode) tt_write_string (Blink_Vid_Str);
-	  }
-	unknown_attributes = 1;
-     }
-
-   if (SLtt_Use_Ansi_Colors)
-     {
-	fg0 = (int) GET_FG(fgbg);
-	bg0 = (int) GET_BG(fgbg);
-
-	if (unknown_attributes 
-	    || (fg0 != (int)GET_FG(Current_Fgbg)))
-	  {
-	     if (fg0 == SLSMG_COLOR_DEFAULT)
-	       tt_write_string (Default_Color_Fg_Str);
-	     else
-	       tt_printf (Color_Fg_Str, fg0, 0);
-	  }
-
-	if (unknown_attributes
-	    || (bg0 != (int)GET_BG(Current_Fgbg)))
-	  {
-	     if (bg0 == SLSMG_COLOR_DEFAULT)
-	       tt_write_string (Default_Color_Bg_Str);
-	     else
-	       tt_printf (Color_Bg_Str, bg0, 0);
-	  }
-     }
-
-   Current_Fgbg = fgbg;
-}
-
-static int Video_Initialized;
-
-void SLtt_reverse_video (int color)
-{
-   SLtt_Char_Type fgbg;
-   char *esc;
-
-   if (Worthless_Highlight) return;
-   if ((color < 0) || (color >= JMAX_COLORS)) return;
-
-   if (Video_Initialized == 0)
-     {
-	if (color == JNORMAL_COLOR)
-	  {
-	     tt_write_string (Norm_Vid_Str);
-	  }
-	else tt_write_string (Rev_Vid_Str);
-	Current_Fgbg = 0xFFFFFFFFU;
-	return;
-     }
-
-   if (SLtt_Use_Ansi_Colors)
-     {
-	fgbg = Ansi_Color_Map[color].fgbg;
-	if ((esc = Ansi_Color_Map[color].custom_esc) != NULL)
-	  {
-	     if (fgbg != Current_Fgbg)
-	       {
-		  Current_Fgbg = fgbg;
-		  tt_write_string (esc);
-		  return;
-	       }
-	  }
-     }
-   else fgbg = Ansi_Color_Map[color].mono;
-
-   if (fgbg == Current_Fgbg) return;
-   write_attributes (fgbg);
-}
-
-void SLtt_normal_video (void)
-{
-   SLtt_reverse_video(JNORMAL_COLOR);
-}
-
-void SLtt_narrow_width (void)
-{
-   tt_write_string("\033[?3l");
-}
-
-void SLtt_wide_width (void)
-{
-   tt_write_string("\033[?3h");
-}
-
-/* Highest bit represents the character set. */
-#define COLOR_MASK 0x7F00
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-static int bce_color_eqs (unsigned int a, unsigned int b)
-{
-   a = (a & COLOR_MASK) >> 8;
-   b = (b & COLOR_MASK) >> 8;
-   
-   if (a == b)
-     return 1;
-
-   if (SLtt_Use_Ansi_Colors == 0)
-     return Ansi_Color_Map[a].mono == Ansi_Color_Map[b].mono;
-   
-   if (Bce_Color_Offset == 0)
-     return Ansi_Color_Map[a].fgbg == Ansi_Color_Map[b].fgbg;
-   
-   /* If either are color 0, then we do not know what that means since the
-    * terminal does not support BCE */
-   if ((a == 0) || (b == 0))
-     return 0;
-     
-   return Ansi_Color_Map[a-1].fgbg == Ansi_Color_Map[b-1].fgbg;
-}
-#define COLOR_EQS(a,b) bce_color_eqs (a,b)
-#else
-# define COLOR_OF(x) (((unsigned int)(x) & COLOR_MASK) >> 8)
-# define COLOR_EQS(a, b) \
-   (SLtt_Use_Ansi_Colors \
-    ? (Ansi_Color_Map[COLOR_OF(a)].fgbg == Ansi_Color_Map[COLOR_OF(b)].fgbg)\
-    :  (Ansi_Color_Map[COLOR_OF(a)].mono == Ansi_Color_Map[COLOR_OF(b)].mono))
-#endif
-
-#define CHAR_EQS(a, b) (((a) == (b))\
-			|| ((((a) & ~COLOR_MASK) == ((b) & ~COLOR_MASK))\
-			    && COLOR_EQS((a), (b))))
-
-/* The whole point of this routine is to prevent writing to the last column
- * and last row on terminals with automatic margins.
- */
-static void write_string_with_care (char *str)
-{
-   unsigned int len;
-
-   if (str == NULL) return;
-
-   len = strlen (str);
-   if (Automatic_Margins && (Cursor_r + 1 == SLtt_Screen_Rows))
-     {
-	if (len + (unsigned int) Cursor_c >= (unsigned int) SLtt_Screen_Cols)
-	  {
-	     /* For now, just do not write there.  Later, something more
-	      * sophisticated will be implemented.
-	      */
-	     if (SLtt_Screen_Cols > Cursor_c)
-	       len = SLtt_Screen_Cols - Cursor_c - 1;
-	     else 
-	       len = 0;
-	  }
-     }
-   tt_write (str, len);
-}
-
-static void send_attr_str (SLsmg_Char_Type *s)
-{
-   unsigned char out[256], ch, *p;
-   register SLtt_Char_Type attr;
-   register SLsmg_Char_Type sh;
-   int color, last_color = -1;
-
-   p = out;
-   while (0 != (sh = *s++))
-     {
-	ch = sh & 0xFF;
-	color = ((int) sh & 0xFF00) >> 8;
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-	if (Bce_Color_Offset
-	    && (color >= Bce_Color_Offset))
-	  color -= Bce_Color_Offset;
-#endif
-
-	if (color != last_color)
-	  {
-	     if (SLtt_Use_Ansi_Colors) attr = Ansi_Color_Map[color & 0x7F].fgbg;
-	     else attr = Ansi_Color_Map[color & 0x7F].mono;
-
-	     if (sh & 0x8000) /* alternate char set */
-	       {
-		  if (SLtt_Use_Blink_For_ACS)
-		    {
-		       if (SLtt_Blink_Mode) attr |= SLTT_BLINK_MASK;
-		    }
-		  else attr |= SLTT_ALTC_MASK;
-	       }
-
-	     if (attr != Current_Fgbg)
-	       {
-		  if ((ch != ' ') ||
-		      /* it is a space so only consider it different if it
-		       * has different attributes.
-		       */
-		      (attr & BGALL_MASK) != (Current_Fgbg & BGALL_MASK))
-		    {
-		       if (p != out)
-			 {
-			    *p = 0;
-			    write_string_with_care ((char *) out);
-			    Cursor_c += (int) (p - out);
-			    p = out;
-			 }
-
-		       if (SLtt_Use_Ansi_Colors && (NULL != Ansi_Color_Map[color & 0x7F].custom_esc))
-			 {
-			    tt_write_string (Ansi_Color_Map[color & 0x7F].custom_esc);
-			    /* Just in case the custom escape sequence screwed up
-			     * the alt character set state...
-			     */
-	                    if ((attr & SLTT_ALTC_MASK) != (Current_Fgbg & SLTT_ALTC_MASK))
-			      SLtt_set_alt_char_set ((int) (attr & SLTT_ALTC_MASK));
-			    Current_Fgbg = attr;
-			 }
-		       else write_attributes (attr);
-
-		       last_color = color;
-		    }
-	       }
-	  }
-	*p++ = ch;
-     }
-   *p = 0;
-   if (p != out) write_string_with_care ((char *) out);
-   Cursor_c += (int) (p - out);
-}
-
-static void forward_cursor (unsigned int n, int row)
-{
-   char buf [1024];
-
-   if (n <= 4)
-     {
-	SLtt_normal_video ();
-	SLMEMSET (buf, ' ', n);
-	buf[n] = 0;
-	write_string_with_care (buf);
-	Cursor_c += n;
-     }
-   else if (Curs_F_Str != NULL)
-     {
-	Cursor_c += n;
-	n = tt_sprintf(buf, Curs_F_Str, (int) n, 0);
-	tt_write(buf, n);
-     }
-   else SLtt_goto_rc (row, (int) (Cursor_c + n));
-}
-
-
-void SLtt_smart_puts(SLsmg_Char_Type *neww, SLsmg_Char_Type *oldd, int len, int row)
-{
-   register SLsmg_Char_Type *p, *q, *qmax, *pmax, *buf;
-   SLsmg_Char_Type buffer[256];
-   unsigned int n_spaces;
-   SLsmg_Char_Type *space_match, *last_buffered_match;
-#ifdef HP_GLITCH_CODE
-   int handle_hp_glitch = 0;
-#endif
-   SLsmg_Char_Type space_char;
-#define SLTT_USE_INSERT_HACK 1
-#if SLTT_USE_INSERT_HACK
-   SLsmg_Char_Type insert_hack_prev = 0;
-   SLsmg_Char_Type insert_hack_char = 0;
-
-   if ((row + 1 == SLtt_Screen_Rows)
-       && (len == SLtt_Screen_Cols)
-       && (len > 1)
-       && (SLtt_Term_Cannot_Insert == 0)
-       && Automatic_Margins)
-     {
-	insert_hack_char = neww[len-1];
-	if (oldd[len-1] == insert_hack_char)
-	  insert_hack_char = 0;
-	else 
-	  insert_hack_prev = neww[len-2];
-     }
-#endif
-     
-   q = oldd; p = neww;
-   qmax = oldd + len;
-   pmax = p + len;
-
-   /* Find out where to begin --- while they match, we are ok */
-   while (1)
-     {
-	if (q == qmax) return;
-#if SLANG_HAS_KANJI_SUPPORT
-	if (*p & 0x80)
-	  { /* new is kanji */
-	     if ((*q & 0x80) && ((q + 1) < qmax))
-	       { /* old is also kanji */
-		  if (((0xFF & *q) != (0xFF & *p))
-		      || ((0xFF & q[1]) != (0xFF & p[1])))
-		    break; /* both kanji, but not match */
-
-		  else
-		    { /* kanji match ! */
-		       if (!COLOR_EQS(*q, *p)) break;
-		       q++; p++;
-		       if (!COLOR_EQS(*q, *p)) break;
-		       /* really match! */
-		       q++; p++;
-		       continue;
-		    }
-	       }
-	     else break; /* old is not kanji */
-	  }
-	else
-	  { /* new is not kanji */
-	     if (*q & 0x80) break; /* old is kanji */
-	  }
-#endif
-	if (!CHAR_EQS(*q, *p)) break;
-	q++; p++;
-     }
-
-#ifdef HP_GLITCH_CODE
-   if (Has_HP_Glitch)
-     {
-	SLsmg_Char_Type *qq = q;
-
-	SLtt_goto_rc (row, (int) (p - neww));
-
-	while (qq < qmax)
-	  {
-	     if (*qq & 0xFF00)
-	       {
-		  SLtt_normal_video ();
-		  SLtt_del_eol ();
-		  qmax = q;
-		  handle_hp_glitch = 1;
-		  break;
-	       }
-	     qq++;
-	  }
-     }
-#endif
-   /* Find where the last non-blank character on old/new screen is */
-
-   space_char = ' ';
-   if ((*(pmax-1) & 0xFF) == ' ')
-     {
-	/* If we get here, then we can erase to the end of the line to create
-	 * the final space.  However, this will only work _if_ erasing will 
-	 * get us the correct color.  If the terminal supports BCE, then this
-	 * is easy.  If it does not, then we can only perform this operation
-	 * if the color is known via something like COLORFGBG.  For now, 
-	 * I just will not perform the optimization for such terminals.
-	 */
-	if ((Can_Background_Color_Erase)
-	    && SLtt_Use_Ansi_Colors)
-	  space_char = *(pmax - 1);
-
-	while (pmax > p)
-	  {
-	     pmax--;
-	     if (!CHAR_EQS(*pmax, space_char))
-	       {
-		  pmax++;
-		  break;
-	       }
-	  }
-     }
-
-   while (qmax > q)
-     {
-	qmax--;
-	if (!CHAR_EQS(*qmax, space_char))
-	  {
-	     qmax++;
-	     break;
-	  }
-     }
-
-   last_buffered_match = buf = buffer;		       /* buffer is empty */
-
-#ifdef HP_GLITCH_CODE
-   if (handle_hp_glitch)
-     {
-	while (p < pmax)
-	  {
-	     *buf++ = *p++;
-	  }
-     }
-#endif
-
-#ifdef HP_GLITCH_CODE
-   if (Has_HP_Glitch == 0)
-     {
-#endif
-	/* Try use use erase to bol if possible */
-	if ((Del_Bol_Str != NULL) && ((*neww & 0xFF) == 32))
-	  {
-	     SLsmg_Char_Type *p1;
-	     SLsmg_Char_Type blank;
-
-	     p1 = neww;
-	     if ((Can_Background_Color_Erase)
-		 && SLtt_Use_Ansi_Colors)
-	       blank = *p1;
-	     /* black+white attributes do not support bce */
-	     else
-	       blank = 32;
-
-	     while ((p1 < pmax) && (CHAR_EQS (*p1, blank)))
-	       p1++;
-
-	     /* Is this optimization worth it?  Assume Del_Bol_Str is ESC [ 1 K
-	      * It costs 4 chars + the space needed to properly position the 
-	      * cursor, e.g., ESC [ 10;10H. So, it costs at least 13 characters.
-	      */
-	     if ((p1 > neww + 13) 
-		 && (p1 >= p)
-		 /* Avoid erasing from the end of the line */
-		 && ((p1 != pmax) || (pmax < neww + len)))
-	       {
-		  int ofs = (int) (p1 - neww);
-		  q = oldd + ofs;
-		  p = p1;
-		  SLtt_goto_rc (row, ofs - 1);
-		  SLtt_reverse_video (blank >> 8);
-		  tt_write_string (Del_Bol_Str);
-		  tt_write (" ", 1);
-		  Cursor_c += 1;
-	       }
-	     else
-	       SLtt_goto_rc (row, (int) (p - neww));
-	  }
-	else
-	  SLtt_goto_rc (row, (int) (p - neww));
-#ifdef HP_GLITCH_CODE
-     }
-#endif
-   
-   
-   /* loop using overwrite then skip algorithm until done */
-   while (1)
-     {
-	/* while they do not match and we do not hit a space, buffer them up */
-	n_spaces = 0;
-	while (p < pmax)
-	  {
-	     if (CHAR_EQS(*q, 32) && CHAR_EQS(*p, 32))
-	       {
-		  /* If *q is not a space, we would have to overwrite it.
-		   * However, if *q is a space, then while *p is also one,
-		   * we only need to skip over the blank field.
-		   */
-		  space_match = p;
-		  p++; q++;
-		  while ((p < pmax)
-			 && CHAR_EQS(*q, 32)
-			 && CHAR_EQS(*p, 32))
-		    {
-		       p++;
-		       q++;
-		    }
-		  n_spaces = (unsigned int) (p - space_match);
-		  break;
-	       }
-#if SLANG_HAS_KANJI_SUPPORT
-	     if ((*p & 0x80) && ((p + 1) < pmax))
-	       { /* new is kanji */
-		  if (*q & 0x80)
-		    { /* old is also kanji */
-		       if (((0xFF & *q) != (0xFF & *p))
-			   || ((0xFF & q[1]) != (0xFF & p[1])))
-			 {
-			    /* both kanji, but not match */
-			    *buf++ = *p++;
-			    *buf++ = *p++;
-			    q += 2;
-			    continue;
-			 }
-		       else
-			 { /* kanji match ? */
-			    if (!COLOR_EQS(*q, *p) || !COLOR_EQS(*(q+1), *(p+1)))
-			      {
-				 /* code is match, but color is diff */
-				 *buf++ = *p++;
-				 *buf++ = *p++;
-				 q += 2;
-				 continue;
-			      }
-			    /* really match ! */
-			    break;
-			 }
-		    }
- 		  else
-		    { /* old is not kanji */
-		       *buf++ = *p++;
-		       *buf++ = *p++;
-		       q += 2;
-		       continue;
-		    }
-	       }
-	     else
-	       { /* new is not kanji */
- 		  if (*q & 0x80)
-		    { /* old is kanji */
-		       *buf++ = *p++;
-		       q++;
-		       continue;
-		    }
-	       }
-#endif
-
-	     if (CHAR_EQS(*q, *p)) break;
-	     *buf++ = *p++;
-	     q++;
-	  }
-	*buf = 0;
-
-	if (buf != buffer) send_attr_str (buffer);
-	buf = buffer;
-
-	if (n_spaces 
-	    && ((p < pmax) 	       /* erase to eol will achieve this effect*/
-		|| (space_char != 32)))/* unless space_char is not a simple space */
-	  {
-	     forward_cursor (n_spaces, row);
-	  }
-
-	/* Now we overwrote what we could and cursor is placed at position
-	 * of a possible match of new and old.  If this is the case, skip
-	 * some more.
-	 */
-#if !SLANG_HAS_KANJI_SUPPORT
-	while ((p < pmax) && CHAR_EQS(*p, *q))
-	  {
-	     *buf++ = *p++;
-	     q++;
-	  }
-#else
-	/* Kanji */
-	while (p < pmax)
-	  {
-	     if ((*p & 0x80) && ((p + 1) < pmax))
-	       { /* new is kanji */
-		  if (*q & 0x80)
-		    { /* old is also kanji */
-		       if (((0xFF & *q) == (0xFF & *p))
-			   && ((0xFF & q[1]) == (0xFF & p[1])))
-			 {
-			    /* kanji match ? */
-			    if (!COLOR_EQS(*q, *p)
-				|| !COLOR_EQS(q[1], p[1]))
-			      break;
-
-			    *buf++ = *p++;
-			    q++;
-			    if (p >= pmax)
-			      {
-				 *buf++ = 32;
-				 p++;
-				 break;
-			      }
-			    else
-			      {
-				 *buf++ = *p++;
-				 q++;
-				 continue;
-			      }
-			 }
-		       else break; /* both kanji, but not match */
-		    }
-		  else break; /* old is not kanji */
-	       }
-	     else
-	       {  /* new is not kanji */
-		  if (*q & 0x80) break; /* old is kanji */
-		  if (!CHAR_EQS(*q, *p)) break;
-		  *buf++ = *p++;
-		  q++;
-	       }
-	  }
-#endif
-	last_buffered_match = buf;
-	if (p >= pmax) break;
-
-	/* jump to new position is it is greater than 5 otherwise
-	 * let it sit in the buffer and output it later.
-	 */
-	if ((int) (buf - buffer) >= 5)
-	  {
-	     forward_cursor ((unsigned int) (buf - buffer), row);
-	     last_buffered_match = buf = buffer;
-	  }
-     }
-
-   if (buf != buffer)
-     {
-	if (q < qmax)
-	  {
-	     if ((buf == last_buffered_match)
-		 && ((int) (buf - buffer) >= 5))
-	       {
-		  forward_cursor ((unsigned int) (buf - buffer), row);
-	       }
-	     else
-	       {
-		  *buf = 0;
-		  send_attr_str (buffer);
-	       }
-	  }
-     }
-
-   if (q < qmax) 
-     {
-	SLtt_reverse_video (space_char >> 8);
-	del_eol ();
-     }
-   
-#if SLTT_USE_INSERT_HACK
-   else if (insert_hack_char)
-     {
-	SLtt_goto_rc (SLtt_Screen_Rows-1, SLtt_Screen_Cols-2);
-	buffer[0] = insert_hack_char;
-	buffer[1] = 0;
-	send_attr_str (buffer);
-	SLtt_goto_rc (SLtt_Screen_Rows-1, SLtt_Screen_Cols-2);
-	buffer[0] = insert_hack_prev;
-	SLtt_begin_insert ();
-	send_attr_str (buffer);
-	SLtt_end_insert ();
-     }
-#endif
-
-   if (Automatic_Margins && (Cursor_c + 1 >= SLtt_Screen_Cols)) Cursor_Set = 0;
-}
-
-static void get_color_info (void)
-{
-   char *fg, *bg;
-
-   /* Allow easy mechanism to override inadequate termcap/terminfo files. */
-   if (SLtt_Use_Ansi_Colors == 0)
-     SLtt_Use_Ansi_Colors = (NULL != getenv ("COLORTERM"));
-
-   if (SLtt_Use_Ansi_Colors)
-     Is_Color_Terminal = 1;
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-   if (Can_Background_Color_Erase == 0)
-     Can_Background_Color_Erase = (NULL != getenv ("COLORTERM_BCE"));
-#endif
-
-   if (-1 == get_default_colors (&fg, &bg))
-     return;
-
-   /* Check to see if application has already set them. */
-   if (Color_0_Modified)
-     return;
-
-   SLtt_set_color (0, NULL, fg, bg);
-   SLtt_set_color (1, NULL, bg, fg);
-}
-
-/* termcap stuff */
-
-#ifdef __unix__
-
-static int Termcap_Initalized = 0;
-
-#ifdef USE_TERMCAP
-/* Termcap based system */
-static char Termcap_Buf[4096];
-static char Termcap_String_Buf[4096];
-static char *Termcap_String_Ptr;
-extern char *tgetstr(char *, char **);
-extern int tgetent(char *, char *);
-extern int tgetnum(char *);
-extern int tgetflag(char *);
-#else
-/* Terminfo */
-static SLterminfo_Type *Terminfo;
-#endif
-
-#define TGETFLAG(x) (SLtt_tgetflag(x) > 0)
-
-static char *fixup_tgetstr (char *what)
-{
-   register char *w, *w1;
-   char *wsave;
-   
-   if (what == NULL)
-     return NULL;
-
-   /* Check for AIX brain-damage */
-   if (*what == '@')
-     return NULL;
-
-   /* lose pad info --- with today's technology, term is a loser if
-    it is really needed */
-   while ((*what == '.') ||
-	  ((*what >= '0') && (*what <= '9'))) what++;
-   if (*what == '*') what++;
-   
-   /* lose terminfo padding--- looks like $<...> */
-   w = what;
-   while (*w) if ((*w++ == '$') && (*w == '<'))
-     {
-	w1 = w - 1;
-	while (*w && (*w != '>')) w++;
-	if (*w == 0) break;
-	w++;
-	wsave = w1;
-	while ((*w1++ = *w++) != 0);
-	w = wsave;
-     }
-
-   if (*what == 0) what = NULL;
-   return what;
-}
-
-char *SLtt_tgetstr (char *s)
-{
-   if (Termcap_Initalized == 0)
-     return NULL;
-   
-#ifdef USE_TERMCAP
-   s = tgetstr (s, &Termcap_String_Ptr);
-#else
-   s = _SLtt_tigetstr (Terminfo, s);
-#endif
-   return fixup_tgetstr (s);
-}
-
-int SLtt_tgetnum (char *s)
-{
-   if (Termcap_Initalized == 0)
-     return -1;
-#ifdef USE_TERMCAP
-   return tgetnum (s);
-#else
-   return _SLtt_tigetnum (Terminfo, s);
-#endif
-}
-
-int SLtt_tgetflag (char *s)
-{
-   if (Termcap_Initalized == 0)
-     return -1;
-#ifdef USE_TERMCAP
-   return tgetflag (s);
-#else
-   return _SLtt_tigetflag (Terminfo, s);
-#endif
-}
-
-static int Vt100_Like = 0;
-
-void SLtt_get_terminfo (void)
-{
-   char *term;
-   int status;
-
-   term = getenv ("TERM");
-   if (term == NULL)
-     SLang_exit_error("TERM environment variable needs set.");
-
-   if (0 == (status = SLtt_initialize (term)))
-     return;
-
-   if (status == -1)
-     {
-	SLang_exit_error ("Unknown terminal: %s\n\
-Check the TERM environment variable.\n\
-Also make sure that the terminal is defined in the terminfo database.\n\
-Alternatively, set the TERMCAP environment variable to the desired\n\
-termcap entry.",
-			  term);
-     }
-
-   if (status == -2)
-     {
-	SLang_exit_error ("\
-Your terminal lacks the ability to clear the screen or position the cursor.\n");
-     }
-}
-
-/* Returns 0 if all goes well, -1 if terminal capabilities cannot be deduced,
- * or -2 if terminal cannot position the cursor.
- */
-int SLtt_initialize (char *term)
-{
-   char *t, ch;
-   int is_xterm;
-   int almost_vtxxx;
-
-   if (SLang_TT_Write_FD == -1)
-     {
-	/* Apparantly, this cannot fail according to the man pages. */
-	SLang_TT_Write_FD = fileno (stdout);
-     }
-   
-   if (term == NULL)
-     {
-	term = getenv ("TERM");
-	if (term == NULL)
-	  return -1;
-     }
-
-   Linux_Console = (!strncmp (term, "linux", 5)
-# ifdef linux
-		    || !strncmp(term, "con", 3)
-# endif
-		    );
-
-   t = term;
-
-   if (strcmp(t, "vt52") && (*t++ == 'v') && (*t++ == 't')
-       && (ch = *t, (ch >= '1') && (ch <= '9'))) Vt100_Like = 1;
-
-   is_xterm = ((0 == strncmp (term, "xterm", 5))
-	       || (0 == strncmp (term, "rxvt", 4))
-	       || (0 == strncmp (term, "Eterm", 5)));
-
-   almost_vtxxx = (Vt100_Like
-		   || Linux_Console
-		   || is_xterm
-		   || !strcmp (term, "screen"));
-
-# ifndef USE_TERMCAP
-   if (NULL == (Terminfo = _SLtt_tigetent (term)))
-     {
-	if (almost_vtxxx) /* Special cases. */
-	  {
-	     int vt102 = 1;
-	     if (!strcmp (term, "vt100")) vt102 = 0;
-	     get_color_info ();
-   	     SLtt_set_term_vtxxx (&vt102);
-	     return 0;
-	  }
-	return -1;
-     }
-# else				       /* USE_TERMCAP */
-   if (1 != tgetent(Termcap_Buf, term))
-     return -1;
-   Termcap_String_Ptr = Termcap_String_Buf;
-# endif				       /* NOT USE_TERMCAP */
-
-   Termcap_Initalized = 1;
-
-   Cls_Str = SLtt_tgetstr ("cl");
-   Curs_Pos_Str = SLtt_tgetstr ("cm");
-
-   if ((NULL == (Ins_Mode_Str = SLtt_tgetstr("im")))
-       || ( NULL == (Eins_Mode_Str = SLtt_tgetstr("ei")))
-       || ( NULL == (Del_Char_Str = SLtt_tgetstr("dc"))))
-     SLtt_Term_Cannot_Insert = 1;
-
-   Visible_Bell_Str = SLtt_tgetstr ("vb");
-   Curs_Up_Str = SLtt_tgetstr ("up");
-   Rev_Scroll_Str = SLtt_tgetstr("sr");
-   Del_N_Lines_Str = SLtt_tgetstr("DL");
-   Add_N_Lines_Str = SLtt_tgetstr("AL");
-
-   /* Actually these are used to initialize terminals that use cursor
-    * addressing.  Hard to believe.
-    */
-   Term_Init_Str = SLtt_tgetstr ("ti");
-   Term_Reset_Str = SLtt_tgetstr ("te");
-
-   /* If I do this for vtxxx terminals, arrow keys start sending ESC O A,
-    * which I do not want.  This is mainly for HP terminals.
-    */
-   if ((almost_vtxxx == 0) || SLtt_Force_Keypad_Init)
-     {
-	Keypad_Init_Str = SLtt_tgetstr ("ks");
-	Keypad_Reset_Str = SLtt_tgetstr ("ke");
-     }
-
-   /* Make up for defective termcap/terminfo databases */
-   if ((Vt100_Like && (term[2] != '1'))
-       || Linux_Console
-       || is_xterm
-       )
-     {
-	if (Del_N_Lines_Str == NULL) Del_N_Lines_Str = "\033[%dM";
-	if (Add_N_Lines_Str == NULL) Add_N_Lines_Str = "\033[%dL";
-     }
-
-   Scroll_R_Str = SLtt_tgetstr("cs");
-
-   SLtt_get_screen_size ();
-
-   if ((Scroll_R_Str == NULL)
-       || (((NULL == Del_N_Lines_Str) || (NULL == Add_N_Lines_Str))
-	   && (NULL == Rev_Scroll_Str)))
-     {
-	if (is_xterm
-	    || Linux_Console
-	    )
-	  {
-	     /* Defective termcap mode!!!! */
-	     SLtt_set_term_vtxxx (NULL);
-	  }
-	else SLtt_Term_Cannot_Scroll = 1;
-     }
-
-   Del_Eol_Str = SLtt_tgetstr("ce");
-   Del_Bol_Str = SLtt_tgetstr("cb");
-   if (is_xterm && (Del_Bol_Str == NULL))
-     Del_Bol_Str = "\033[1K";
-   if (is_xterm && (Del_Eol_Str == NULL))
-     Del_Bol_Str = "\033[K";
-
-   Rev_Vid_Str = SLtt_tgetstr("mr");
-   if (Rev_Vid_Str == NULL) Rev_Vid_Str = SLtt_tgetstr("so");
-
-   Bold_Vid_Str = SLtt_tgetstr("md");
-
-   /* Although xterm cannot blink, it does display the blinking characters
-    * as bold ones.  Some Rxvt will display the background as high intensity.
-    */
-   if ((NULL == (Blink_Vid_Str = SLtt_tgetstr("mb")))
-       && is_xterm)
-     Blink_Vid_Str = "\033[5m";
-
-   UnderLine_Vid_Str = SLtt_tgetstr("us");
-
-   Start_Alt_Chars_Str = SLtt_tgetstr ("as");   /* smacs */
-   End_Alt_Chars_Str = SLtt_tgetstr ("ae");   /* rmacs */
-   Enable_Alt_Char_Set = SLtt_tgetstr ("eA");   /* enacs */
-   SLtt_Graphics_Char_Pairs = SLtt_tgetstr ("ac");
-
-   if (NULL == SLtt_Graphics_Char_Pairs)
-     {
-	/* make up for defective termcap/terminfo */
-	if (Vt100_Like)
-	  {
-	     Start_Alt_Chars_Str = "\016";
-	     End_Alt_Chars_Str = "\017";
-	     Enable_Alt_Char_Set = "\033)0";
-	  }
-     }
-
-    /* aixterm added by willi */
-   if (is_xterm || !strncmp (term, "aixterm", 7))
-     {
-	Start_Alt_Chars_Str = "\016";
-	End_Alt_Chars_Str = "\017";
-	Enable_Alt_Char_Set = "\033(B\033)0";
-     }
-
-   if ((SLtt_Graphics_Char_Pairs == NULL) &&
-       ((Start_Alt_Chars_Str == NULL) || (End_Alt_Chars_Str == NULL)))
-     {
-	SLtt_Has_Alt_Charset = 0;
-	Enable_Alt_Char_Set = NULL;
-     }
-   else SLtt_Has_Alt_Charset = 1;
-
-#ifdef AMIGA
-   Enable_Alt_Char_Set = Start_Alt_Chars_Str = End_Alt_Chars_Str = NULL;
-#endif
-
-   /* status line capabilities */
-   if ((SLtt_Has_Status_Line == -1)
-       && (0 != (SLtt_Has_Status_Line = TGETFLAG ("hs"))))
-     {
-	Disable_Status_line_Str = SLtt_tgetstr ("ds");
-	Return_From_Status_Line_Str = SLtt_tgetstr ("fs");
-	Goto_Status_Line_Str = SLtt_tgetstr ("ts");
-	/* Status_Line_Esc_Ok = TGETFLAG("es"); */
-	Num_Status_Line_Columns = SLtt_tgetnum ("ws");
-	if (Num_Status_Line_Columns < 0) Num_Status_Line_Columns = 0;
-     }
-
-   if (NULL == (Norm_Vid_Str = SLtt_tgetstr("me")))
-     {
-	Norm_Vid_Str = SLtt_tgetstr("se");
-     }
-
-   Cursor_Invisible_Str = SLtt_tgetstr("vi");
-   Cursor_Visible_Str = SLtt_tgetstr("ve");
-
-   Curs_F_Str = SLtt_tgetstr("RI");
-
-# if 0
-   if (NULL != Curs_F_Str)
-     {
-	Len_Curs_F_Str = strlen(Curs_F_Str);
-     }
-   else Len_Curs_F_Str = strlen(Curs_Pos_Str);
-# endif
-
-   Automatic_Margins = TGETFLAG ("am");
-   /* No_Move_In_Standout = !TGETFLAG ("ms"); */
-# ifdef HP_GLITCH_CODE
-   Has_HP_Glitch = TGETFLAG ("xs");
-# else
-   Worthless_Highlight = TGETFLAG ("xs");
-# endif
-
-   if (Worthless_Highlight == 0)
-     {				       /* Magic cookie glitch */
-	Worthless_Highlight = (SLtt_tgetnum ("sg") > 0);
-     }
-
-   if (Worthless_Highlight)
-     SLtt_Has_Alt_Charset = 0;
-
-   Reset_Color_String = SLtt_tgetstr ("op");
-   Color_Fg_Str = SLtt_tgetstr ("AF"); /* ANSI setaf */
-   Color_Bg_Str = SLtt_tgetstr ("AB"); /* ANSI setbf */
-   if ((Color_Fg_Str == NULL) || (Color_Bg_Str == NULL))
-     {
-	Color_Fg_Str = SLtt_tgetstr ("Sf");   /* setf */
-	Color_Bg_Str = SLtt_tgetstr ("Sb");   /* setb */
-     }
-
-   if ((Max_Terminfo_Colors = SLtt_tgetnum ("Co")) < 0)
-     Max_Terminfo_Colors = 8;
-
-   if ((Color_Bg_Str != NULL) && (Color_Fg_Str != NULL))
-     SLtt_Use_Ansi_Colors = 1;
-   else
-     {
-#if 0
-	Color_Fg_Str = "%?%p1%{7}%>%t\033[1;3%p1%{8}%m%dm%e\033[3%p1%dm%;";
-	Color_Bg_Str = "%?%p1%{7}%>%t\033[5;4%p1%{8}%m%dm%e\033[4%p1%dm%;";
-	Max_Terminfo_Colors = 16;
-#else
-	Color_Fg_Str = "\033[3%dm";
-	Color_Bg_Str = "\033[4%dm";
-	Max_Terminfo_Colors = 8;
-#endif
-     }
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-   Can_Background_Color_Erase = TGETFLAG ("ut");   /* bce */
-   /* Modern xterms have the BCE capability as well as the linux console */
-   if (Can_Background_Color_Erase == 0)
-     {
-	Can_Background_Color_Erase = (Linux_Console
-# if SLTT_XTERM_ALWAYS_BCE
-				      || is_xterm
-# endif
-				      );
-     }
-#endif
-   get_color_info ();
-
-  
-   if ((Cls_Str == NULL)
-       || (Curs_Pos_Str == NULL))
-     return -2;
-
-   return 0;
-}
-
-#endif
-/* Unix */
-
-/* specific to vtxxx only */
-void SLtt_enable_cursor_keys (void)
-{
-#ifdef __unix__
-   if (Vt100_Like)
-#endif
-     tt_write_string("\033=\033[?1l");
-}
-
-#ifdef VMS
-int SLtt_initialize (char *term)
-{
-   SLtt_get_terminfo ();
-   return 0;
-}
-
-void SLtt_get_terminfo ()
-{
-   int zero = 0;
-
-   Color_Fg_Str = "\033[3%dm";
-   Color_Bg_Str = "\033[4%dm";
-   Max_Terminfo_Colors = 8;
-
-   get_color_info ();
-
-   SLtt_set_term_vtxxx(&zero);
-   Start_Alt_Chars_Str = "\016";
-   End_Alt_Chars_Str = "\017";
-   SLtt_Has_Alt_Charset = 1;
-   SLtt_Graphics_Char_Pairs = "aaffgghhjjkkllmmnnooqqssttuuvvwwxx";
-   Enable_Alt_Char_Set = "\033(B\033)0";
-   SLtt_get_screen_size ();
-}
-#endif
-
-/* This sets term for vt102 terminals it parameter vt100 is 0.  If vt100
- * is non-zero, set terminal appropriate for a only vt100
- * (no add line capability). */
-
-void SLtt_set_term_vtxxx(int *vt100)
-{
-   Norm_Vid_Str = "\033[m";
-
-   Scroll_R_Str = "\033[%i%d;%dr";
-   Cls_Str = "\033[2J\033[H";
-   Rev_Vid_Str = "\033[7m";
-   Bold_Vid_Str = "\033[1m";
-   Blink_Vid_Str = "\033[5m";
-   UnderLine_Vid_Str = "\033[4m";
-   Del_Eol_Str = "\033[K";
-   Del_Bol_Str = "\033[1K";
-   Rev_Scroll_Str = "\033M";
-   Curs_F_Str = "\033[%dC";
-   /* Len_Curs_F_Str = 5; */
-   Curs_Pos_Str = "\033[%i%d;%dH";
-   if ((vt100 == NULL) || (*vt100 == 0))
-     {
-	Ins_Mode_Str = "\033[4h";
-	Eins_Mode_Str = "\033[4l";
-	Del_Char_Str =  "\033[P";
-	Del_N_Lines_Str = "\033[%dM";
-	Add_N_Lines_Str = "\033[%dL";
-	SLtt_Term_Cannot_Insert = 0;
-     }
-   else
-     {
-	Del_N_Lines_Str = NULL;
-	Add_N_Lines_Str = NULL;
-	SLtt_Term_Cannot_Insert = 1;
-     }
-   SLtt_Term_Cannot_Scroll = 0;
-   /* No_Move_In_Standout = 0; */
-}
-
-int SLtt_init_video (void)
-{
-   /*   send_string_to_term("\033[?6h"); */
-   /* relative origin mode */
-   tt_write_string (Term_Init_Str);
-   tt_write_string (Keypad_Init_Str);
-   SLtt_reset_scroll_region();
-   SLtt_end_insert();
-   tt_write_string (Enable_Alt_Char_Set);
-   Video_Initialized = 1;
-   return 0;
-}
-
-int SLtt_reset_video (void)
-{
-   SLtt_goto_rc (SLtt_Screen_Rows - 1, 0);
-   Cursor_Set = 0;
-   SLtt_normal_video ();	       /* MSKermit requires this  */
-   tt_write_string(Norm_Vid_Str);
-
-   Current_Fgbg = 0xFFFFFFFFU;
-   SLtt_set_alt_char_set (0);
-   if (SLtt_Use_Ansi_Colors)
-     {
-	if (Reset_Color_String == NULL)
-	  {
-	     SLtt_Char_Type attr;
-	     if (-1 != make_color_fgbg (NULL, NULL, &attr))
-	       write_attributes (attr);
-	     else tt_write_string ("\033[0m\033[m");
-	  }
-	else tt_write_string (Reset_Color_String);
-	Current_Fgbg = 0xFFFFFFFFU;
-     }
-   SLtt_erase_line ();
-   tt_write_string (Keypad_Reset_Str);
-   tt_write_string (Term_Reset_Str);
-   SLtt_flush_output ();
-   Video_Initialized = 0;
-   return 0;
-}
-
-void SLtt_bold_video (void)
-{
-   tt_write_string (Bold_Vid_Str);
-}
-
-int SLtt_set_mouse_mode (int mode, int force)
-{
-   char *term;
-
-   if (force == 0)
-     {
-	if (NULL == (term = (char *) getenv("TERM"))) return -1;
-	if (strncmp ("xterm", term, 5))
-	  return -1;
-     }
-
-   if (mode)
-     tt_write_string ("\033[?9h");
-   else
-     tt_write_string ("\033[?9l");
-
-   return 0;
-}
-
-void SLtt_disable_status_line (void)
-{
-   if (SLtt_Has_Status_Line > 0)
-     {
-	tt_write_string (Disable_Status_line_Str);
-	SLtt_flush_output ();
-     }
-}
-
-int SLtt_write_to_status_line (char *s, int col)
-{
-   if ((SLtt_Has_Status_Line <= 0)
-       || (Goto_Status_Line_Str == NULL)
-       || (Return_From_Status_Line_Str == NULL))
-     return -1;
-
-   tt_printf (Goto_Status_Line_Str, col, 0);
-   tt_write_string (s);
-   tt_write_string (Return_From_Status_Line_Str);
-   return 0;
-}
-
-void SLtt_get_screen_size (void)
-{
-#ifdef VMS
-   int status, code;
-   unsigned short chan;
-   $DESCRIPTOR(dev_dsc, "SYS$INPUT:");
-#endif
-   int r = 0, c = 0;
-
-#ifdef TIOCGWINSZ
-   struct winsize wind_struct;
-
-   do
-     {
-	if ((ioctl(1,TIOCGWINSZ,&wind_struct) == 0)
-	    || (ioctl(0, TIOCGWINSZ, &wind_struct) == 0)
-	    || (ioctl(2, TIOCGWINSZ, &wind_struct) == 0))
-	  {
-	     c = (int) wind_struct.ws_col;
-	     r = (int) wind_struct.ws_row;
-	     break;
-	  }
-     }
-   while (errno == EINTR);
-
-#endif
-
-#ifdef VMS
-   status = sys$assign(&dev_dsc,&chan,0,0,0);
-   if (status & 1)
-     {
-	code = DVI$_DEVBUFSIZ;
-	status = lib$getdvi(&code, &chan,0, &c, 0,0);
-	if (!(status & 1))
-	  c = 80;
-	code = DVI$_TT_PAGE;
-	status = lib$getdvi(&code, &chan,0, &r, 0,0);
-	if (!(status & 1))
-	  r = 24;
-	sys$dassgn(chan);
-     }
-#endif
-
-   if (r <= 0)
-     {
-	char *s = getenv ("LINES");
-	if (s != NULL) r = atoi (s);
-     }
-
-   if (c <= 0)
-     {
-	char *s = getenv ("COLUMNS");
-	if (s != NULL) c = atoi (s);
-     }
-
-   if (r <= 0) r = 24;
-   if (c <= 0) c = 80;
-#if 0
-   if ((r <= 0) || (r > 200)) r = 24;
-   if ((c <= 0) || (c > 250)) c = 80;
-#endif
-   SLtt_Screen_Rows = r;
-   SLtt_Screen_Cols = c;
-}
-
-#if SLTT_HAS_NON_BCE_SUPPORT
-int _SLtt_get_bce_color_offset (void)
-{
-   if ((SLtt_Use_Ansi_Colors == 0)
-       || Can_Background_Color_Erase
-       || SLtt_Use_Blink_For_ACS)      /* in this case, we cannot lose a color */
-     Bce_Color_Offset = 0;
-   else
-     {
-	if (GET_BG(Ansi_Color_Map[0].fgbg) == SLSMG_COLOR_DEFAULT)
-	  Bce_Color_Offset = 0;
-	else
-	  Bce_Color_Offset = 1;
-     }
-   
-   return Bce_Color_Offset;
-}
-#endif
diff --git a/mdk-stage1/slang/slerr.c b/mdk-stage1/slang/slerr.c
deleted file mode 100644
index 139b3859b..000000000
--- a/mdk-stage1/slang/slerr.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/* error handling common to all routines. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-void (*SLang_VMessage_Hook) (char *, va_list);
-void (*SLang_Error_Hook)(char *);
-void (*SLang_Exit_Error_Hook)(char *, va_list);
-volatile int SLang_Error = 0;
-char *SLang_Error_Message;
-volatile int SLKeyBoard_Quit = 0;
-
-static char *get_error_string (void)
-{
-   char *str;
-
-   if (!SLang_Error) SLang_Error = SL_UNKNOWN_ERROR;
-   if (SLang_Error_Message != NULL) str = SLang_Error_Message;
-   else switch(SLang_Error)
-     {
-      case SL_NOT_IMPLEMENTED: str = "Not Implemented"; break;
-      case SL_APPLICATION_ERROR: str = "Application Error"; break;
-      case SL_VARIABLE_UNINITIALIZED: str = "Variable Uninitialized"; break;
-      case SL_MALLOC_ERROR : str = "Malloc Error"; break;
-      case SL_INTERNAL_ERROR: str = "Internal Error"; break;
-      case SL_STACK_OVERFLOW: str = "Stack Overflow"; break;
-      case SL_STACK_UNDERFLOW: str = "Stack Underflow"; break;
-      case SL_INTRINSIC_ERROR: str = "Intrinsic Error"; break;
-      case SL_USER_BREAK: str = "User Break"; break;
-      case SL_UNDEFINED_NAME: str = "Undefined Name"; break;
-      case SL_SYNTAX_ERROR: str = "Syntax Error"; break;
-      case SL_DUPLICATE_DEFINITION: str = "Duplicate Definition"; break;
-      case SL_TYPE_MISMATCH: str = "Type Mismatch"; break;
-      case SL_READONLY_ERROR: str = "Variable is read-only"; break;
-      case SL_DIVIDE_ERROR: str = "Divide by zero"; break;
-      case SL_OBJ_NOPEN: str = "Object not opened"; break;
-      case SL_OBJ_UNKNOWN: str = "Object unknown"; break;
-      case SL_INVALID_PARM: str = "Invalid Parameter"; break;
-      case SL_TYPE_UNDEFINED_OP_ERROR:
-	str = "Operation not defined for datatype"; break;
-      case SL_USER_ERROR:
-	str = "User Error"; break;
-      case SL_USAGE_ERROR:
-	str = "Illegal usage of function";
-	break;
-      case SL_FLOATING_EXCEPTION:
-	str = "Floating Point Exception";
-	break;
-      case SL_UNKNOWN_ERROR:
-      default: str = "Unknown Error Code";
-     }
-
-   SLang_Error_Message = NULL;
-   return str;
-}
-
-void SLang_doerror (char *error)
-{
-   char *str = NULL;
-   char *err;
-   char *malloced_err_buf;
-   char err_buf [1024];
-
-   malloced_err_buf = NULL;
-
-   if (((SLang_Error == SL_USER_ERROR)
-	|| (SLang_Error == SL_USAGE_ERROR))
-       && (error != NULL) && (*error != 0))
-     err = error;
-   else
-     {
-	char *sle = "S-Lang Error: ";
-	unsigned int len;
-	char *fmt;
-
-	str = get_error_string ();
-
-	fmt = "%s%s%s";
-	if ((error == NULL) || (*error == 0))
-	  error = "";
-	else if (SLang_Error == SL_UNKNOWN_ERROR)
-	  /* Do not display an unknown error message if error is non-NULL */
-	  str = "";
-	else
-	  fmt = "%s%s: %s";
-
-	len = strlen (sle) + strlen (str) + strlen(error) + 1;
-
-	err = err_buf;
-	if (len >= sizeof (err_buf))
-	  {
-	     if (NULL == (malloced_err_buf = SLmalloc (len)))
-	       err = NULL;
-	     else
-	       err = malloced_err_buf;
-	  }
-
-	if (err != NULL) sprintf (err, fmt, sle, str, error);
-	else err = "Out of memory";
-     }
-
-   if (SLang_Error_Hook == NULL)
-     {
-	fputs (err, stderr);
-	fputs("\r\n", stderr);
-	fflush (stderr);
-     }
-   else
-     (*SLang_Error_Hook)(err);
-
-   SLfree (malloced_err_buf);
-}
-
-void SLang_verror (int err_code, char *fmt, ...)
-{
-   va_list ap;
-   char err [1024];
-
-   if (err_code == 0) err_code = SL_INTRINSIC_ERROR;
-   if (SLang_Error == 0) SLang_Error = err_code;
-
-   if (fmt != NULL)
-     {
-	va_start(ap, fmt);
-	(void) _SLvsnprintf (err, sizeof (err), fmt, ap);
-	fmt = err;
-	va_end(ap);
-     }
-
-   SLang_doerror (fmt);
-}
-
-void SLang_exit_error (char *fmt, ...)
-{
-   va_list ap;
-
-   va_start (ap, fmt);
-   if (SLang_Exit_Error_Hook != NULL)
-     {
-	(*SLang_Exit_Error_Hook) (fmt, ap);
-	exit (1);
-     }
-
-   if (fmt != NULL)
-     {
-	vfprintf (stderr, fmt, ap);
-	fputs ("\r\n", stderr);
-	fflush (stderr);
-     }
-   va_end (ap);
-
-   exit (1);
-}
-
-void SLang_vmessage (char *fmt, ...)
-{
-   va_list ap;
-
-   if (fmt == NULL)
-     return;
-
-   va_start (ap, fmt);
-
-   if (SLang_VMessage_Hook != NULL)
-     (*SLang_VMessage_Hook) (fmt, ap);
-   else
-     {
-	vfprintf (stdout, fmt, ap);
-	fputs ("\r\n", stdout);
-     }
-
-   va_end (ap);
-}
diff --git a/mdk-stage1/slang/slerrno.c b/mdk-stage1/slang/slerrno.c
deleted file mode 100644
index 662fadde1..000000000
--- a/mdk-stage1/slang/slerrno.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* The point of this file is to handle errno values in a system independent
- * way so that they may be used in slang scripts.
- */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <errno.h>
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
-   char *msg;
-   int sys_errno;
-   char *symbolic_name;
-}
-Errno_Map_Type;
-
-static Errno_Map_Type Errno_Map [] =
-{
-#ifndef EPERM
-# define EPERM	-1
-#endif
-     {"Not owner",			EPERM,	"EPERM"},
-#ifndef ENOENT
-# define ENOENT	-1
-#endif
-     {"No such file or directory",	ENOENT,	"ENOENT"},
-#ifndef ESRCH
-# define ESRCH	-1
-#endif
-     {"No such process",		ESRCH,	"ESRCH"},
-#ifndef EINTR
-# define EINTR	-1
-#endif
-     {"Interrupted system call",	EINTR,	"EINTR"},
-#ifndef EIO
-# define EIO	-1
-#endif
-     {"I/O error",			EIO,	"EIO"},
-#ifndef ENXIO
-# define ENXIO	-1
-#endif
-     {"No such device or address",	ENXIO,	"ENXIO"},
-#ifndef E2BIG
-# define E2BIG	-1
-#endif
-     {"Arg list too long",		E2BIG,	"E2BIG"},
-#ifndef ENOEXEC
-# define ENOEXEC	-1
-#endif
-     {"Exec format error",		ENOEXEC,"ENOEXEC"},
-#ifndef EBADF
-# define EBADF	-1
-#endif
-     {"Bad file number",		EBADF,	"EBADF"},
-#ifndef ECHILD
-# define ECHILD	-1
-#endif
-     {"No children",			ECHILD,	"ECHILD"},
-#ifndef EAGAIN
-# define EAGAIN	-1
-#endif
-     {"Try again",			EAGAIN,	"EAGAIN"},
-#ifndef ENOMEM
-# define ENOMEM	-1
-#endif
-     {"Not enough core",		ENOMEM,	"ENOMEM"},
-#ifndef EACCES
-# define EACCES	-1
-#endif
-     {"Permission denied",		EACCES,	"EACCES"},
-#ifndef EFAULT
-# define EFAULT	-1
-#endif
-     {"Bad address",			EFAULT,	"EFAULT"},
-#ifndef ENOTBLK
-# define ENOTBLK	-1
-#endif
-     {"Block device required",		ENOTBLK,	"ENOTBLK"},
-#ifndef EBUSY
-# define EBUSY	-1
-#endif
-     {"Mount device busy",		EBUSY,	"EBUSY"},
-#ifndef EEXIST
-# define EEXIST	-1
-#endif
-     {"File exists",			EEXIST,	"EEXIST"},
-#ifndef EXDEV
-# define EXDEV	-1
-#endif
-     {"Cross-device link",		EXDEV,	"EXDEV"},
-#ifndef ENODEV
-# define ENODEV	-1
-#endif
-     {"No such device",			ENODEV,	"ENODEV"},
-#ifndef ENOTDIR
-# define ENOTDIR	-1
-#endif
-     {"Not a directory",		ENOTDIR,	"ENOTDIR"},
-#ifndef EISDIR
-# define EISDIR	-1
-#endif
-     {"Is a directory",			EISDIR,	"EISDIR"},
-#ifndef EINVAL
-# define EINVAL	-1
-#endif
-     {"Invalid argument",		EINVAL,	"EINVAL"},
-#ifndef ENFILE
-# define ENFILE	-1
-#endif
-     {"File table overflow",		ENFILE,	"ENFILE"},
-#ifndef EMFILE
-# define EMFILE	-1
-#endif
-     {"Too many open files",		EMFILE,	"EMFILE"},
-#ifndef ENOTTY
-# define ENOTTY	-1
-#endif
-     {"Not a typewriter",		ENOTTY,	"ENOTTY"},
-#ifndef ETXTBSY
-# define ETXTBSY	-1
-#endif
-     {"Text file busy",			ETXTBSY,	"ETXTBSY"},
-#ifndef EFBIG
-# define EFBIG	-1
-#endif
-     {"File too large",			EFBIG,	"EFBIG"},
-#ifndef ENOSPC
-# define ENOSPC	-1
-#endif
-     {"No space left on device",	ENOSPC,	"ENOSPC"},
-#ifndef ESPIPE
-# define ESPIPE	-1
-#endif
-     {"Illegal seek",			ESPIPE,	"ESPIPE"},
-#ifndef EROFS
-# define EROFS	-1
-#endif
-     {"Read-only file system",		EROFS,	"EROFS"},
-#ifndef EMLINK
-# define EMLINK	-1
-#endif
-     {"Too many links",			EMLINK,	"EMLINK"},
-#ifndef EPIPE
-# define EPIPE	-1
-#endif
-     {"Broken pipe",			EPIPE,	"EPIPE"},
-#ifndef ELOOP
-# define ELOOP	-1
-#endif
-     {"Too many levels of symbolic links",ELOOP,	"ELOOP"},
-#ifndef ENAMETOOLONG
-# define ENAMETOOLONG	-1
-#endif
-     {"File name too long",		ENAMETOOLONG,	"ENAMETOOLONG"},
-
-     {NULL, 0, NULL}
-};
-
-int _SLerrno_errno;
-
-int SLerrno_set_errno (int sys_errno)
-{
-   _SLerrno_errno = sys_errno;
-   return 0;
-}
-
-char *SLerrno_strerror (int sys_errno)
-{
-   Errno_Map_Type *e;
-
-   e = Errno_Map;
-   while (e->msg != NULL)
-     {
-	if (e->sys_errno == sys_errno)
-	  return e->msg;
-
-	e++;
-     }
-
-   if (sys_errno == SL_ERRNO_NOT_IMPLEMENTED)
-     return "System call not available for this platform";
-
-   return "Unknown error";
-}
-
-static char *intrin_errno_string (int *sys_errno)
-{
-   return SLerrno_strerror (*sys_errno);
-}
-
-int _SLerrno_init (void)
-{
-   static Errno_Map_Type *e;
-
-   if (e != NULL)		       /* already initialized */
-     return 0;
-
-   if ((-1 == SLadd_intrinsic_function ("errno_string", (FVOID_STAR) intrin_errno_string,
-				       SLANG_STRING_TYPE, 1, SLANG_INT_TYPE))
-       || (-1 == SLadd_intrinsic_variable ("errno", (VOID_STAR)&_SLerrno_errno, SLANG_INT_TYPE, 1)))
-     return -1;
-
-   e = Errno_Map;
-   while (e->msg != NULL)
-     {
-	if (-1 == SLadd_intrinsic_variable (e->symbolic_name, (VOID_STAR) &e->sys_errno, SLANG_INT_TYPE, 1))
-	  return -1;
-	e++;
-     }
-
-   return 0;
-}
diff --git a/mdk-stage1/slang/slgetkey.c b/mdk-stage1/slang/slgetkey.c
deleted file mode 100644
index 2f2914f07..000000000
--- a/mdk-stage1/slang/slgetkey.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-unsigned int SLang_Input_Buffer_Len = 0;
-unsigned char SLang_Input_Buffer [SL_MAX_INPUT_BUFFER_LEN];
-
-int SLang_Abort_Char = 7;
-int SLang_Ignore_User_Abort = 0;
-
-/* This has the effect of mapping all characters in the range 128-169 to
- * ESC [ something
- */
-
-unsigned int SLang_getkey (void)
-{
-   unsigned int imax;
-   unsigned int ch;
-
-   if (SLang_Input_Buffer_Len)
-     {
-	ch = (unsigned int) *SLang_Input_Buffer;
-	SLang_Input_Buffer_Len--;
-	imax = SLang_Input_Buffer_Len;
-
-	SLMEMCPY ((char *) SLang_Input_Buffer,
-		(char *) (SLang_Input_Buffer + 1), imax);
-     }
-   else if (SLANG_GETKEY_ERROR == (ch = _SLsys_getkey ())) return ch;
-
-#if _SLANG_MAP_VTXXX_8BIT
-# if !defined(IBMPC_SYSTEM)
-   if (ch & 0x80)
-     {
-	unsigned char i;
-	i = (unsigned char) (ch & 0x7F);
-	if (i < ' ')
-	  {
-	     i += 64;
-	     SLang_ungetkey (i);
-	     ch = 27;
-	  }
-     }
-# endif
-#endif
-   return(ch);
-}
-
-int SLang_ungetkey_string (unsigned char *s, unsigned int n)
-{
-   register unsigned char *bmax, *b, *b1;
-   if (SLang_Input_Buffer_Len + n + 3 > SL_MAX_INPUT_BUFFER_LEN)
-     return -1;
-
-   b = SLang_Input_Buffer;
-   bmax = (b - 1) + SLang_Input_Buffer_Len;
-   b1 = bmax + n;
-   while (bmax >= b) *b1-- = *bmax--;
-   bmax = b + n;
-   while (b < bmax) *b++ = *s++;
-   SLang_Input_Buffer_Len += n;
-   return 0;
-}
-
-int SLang_buffer_keystring (unsigned char *s, unsigned int n)
-{
-
-   if (n + SLang_Input_Buffer_Len + 3 > SL_MAX_INPUT_BUFFER_LEN) return -1;
-
-   SLMEMCPY ((char *) SLang_Input_Buffer + SLang_Input_Buffer_Len,
-	   (char *) s, n);
-   SLang_Input_Buffer_Len += n;
-   return 0;
-}
-
-int SLang_ungetkey (unsigned char ch)
-{
-   return SLang_ungetkey_string(&ch, 1);
-}
-
-int SLang_input_pending (int tsecs)
-{
-   int n;
-   unsigned char c;
-   if (SLang_Input_Buffer_Len) return (int) SLang_Input_Buffer_Len;
-
-   n = _SLsys_input_pending (tsecs);
-
-   if (n <= 0) return 0;
-
-   c = (unsigned char) SLang_getkey ();
-   SLang_ungetkey_string (&c, 1);
-
-   return n;
-}
-
-void SLang_flush_input (void)
-{
-   int quit = SLKeyBoard_Quit;
-
-   SLang_Input_Buffer_Len = 0;
-   SLKeyBoard_Quit = 0;
-   while (_SLsys_input_pending (0) > 0)
-     {
-	(void) _SLsys_getkey ();
-	/* Set this to 0 because _SLsys_getkey may stuff keyboard buffer if
-	 * key sends key sequence (OS/2, DOS, maybe VMS).
-	 */
-	SLang_Input_Buffer_Len = 0;
-     }
-   SLKeyBoard_Quit = quit;
-}
-
-#ifdef IBMPC_SYSTEM
-static int Map_To_ANSI;
-int SLgetkey_map_to_ansi (int enable)
-{
-   Map_To_ANSI = enable;
-   return 0;
-}
-
-static int convert_scancode (unsigned int scan, 
-			     unsigned int shift,
-			     int getkey,
-			     unsigned int *ret_key)
-{
-   unsigned char buf[16];
-   unsigned char *b;
-   unsigned char end;
-   int is_arrow;
-
-   shift &= (_SLTT_KEY_ALT|_SLTT_KEY_SHIFT|_SLTT_KEY_CTRL);
-
-   b = buf;
-   if (_SLTT_KEY_ALT == shift)
-     {
-	shift = 0;
-	*b++ = 27;
-     }
-   *b++ = 27;
-   *b++ = '[';
-
-   is_arrow = 0;
-   end = '~';
-   if (shift)
-     {
-	if (shift == _SLTT_KEY_CTRL)
-	  end = '^';
-	else if (shift == _SLTT_KEY_SHIFT)
-	  end = '$';
-	else shift = 0;
-     }
-
-   /* These mappings correspond to what rxvt produces under Linux */
-   switch (scan & 0xFF)
-     {
-      default:
-	return -1;
-
-      case 0x47:		       /* home */
-	*b++ = '1';
-	break;
-      case 0x48:		       /* up */
-	end = 'A';
-	is_arrow = 1;
-	break;
-      case 0x49:		       /* PgUp */
-	*b++ = '5';
-	break;
-      case 0x4B:		       /* Left */
-	end = 'D';
-	is_arrow = 1;
-	break;
-      case 0x4D:		       /* Right */
-	end = 'C';
-	is_arrow = 1;
-	break;
-      case 0x4F:		       /* End */
-	*b++ = '4';
-	break;
-      case 0x50:		       /* Down */
-	end = 'B';
-	is_arrow = 1;
-	break;
-      case 0x51:		       /* PgDn */
-	*b++ = '6';
-	break;
-      case 0x52:		       /* Insert */
-	*b++ = '2';
-	break;
-      case 0x53:		       /* Delete */
-	*b++ = '3';
-	break;
-      case ';':			       /* F1 */
-	*b++ = '1';
-	*b++ = '1';
-	break;
-      case '<':			       /* F2 */
-	*b++ = '1';
-	*b++ = '2';
-	break;
-      case '=':			       /* F3 */
-	*b++ = '1';
-	*b++ = '3';
-	break;
-
-      case '>':			       /* F4 */
-	*b++ = '1';
-	*b++ = '4';
-	break;
-
-      case '?':			       /* F5 */
-	*b++ = '1';
-	*b++ = '5';
-	break;
-
-      case '@':			       /* F6 */
-	*b++ = '1';
-	*b++ = '7';
-	break;
-
-      case 'A':			       /* F7 */
-	*b++ = '1';
-	*b++ = '8';
-	break;
-
-      case 'B':			       /* F8 */
-	*b++ = '1';
-	*b++ = '9';
-	break;
-
-      case 'C':			       /* F9 */
-	*b++ = '2';
-	*b++ = '0';
-	break;
-
-      case 'D':			       /* F10 */
-	*b++ = '2';
-	*b++ = '1';
-	break;
-
-      case 0x57:		       /* F11 */
-	*b++ = '2';
-	*b++ = '3';
-	break;
-
-      case 0x58:		       /* F12 */
-	*b++ = '2';
-	*b++ = '4';
-	break;
-     }
-
-   if (is_arrow && shift)
-     {
-	if (shift == _SLTT_KEY_CTRL)
-	  end &= 0x1F;
-	else
-	  end |= 0x20;
-     }
-   *b++ = end;
-   
-   if (getkey)
-     {
-	(void) SLang_buffer_keystring (buf + 1, (unsigned int) (b - (buf + 1)));
-	*ret_key = buf[0];
-	return 0;
-     }
-
-   (void) SLang_buffer_keystring (buf, (unsigned int) (b - buf));
-   return 0;
-}
-
-   
-unsigned int _SLpc_convert_scancode (unsigned int scan,
-				     unsigned int shift,
-				     int getkey)
-{
-   unsigned char buf[16];
-
-   if (Map_To_ANSI)
-     {
-	if (0 == convert_scancode (scan, shift, getkey, &scan))
-	  return scan;
-     }
-   
-   if (getkey)
-     {
-	buf[0] = scan & 0xFF;
-	SLang_buffer_keystring (buf, 1);
-	return (scan >> 8) & 0xFF;
-     }
-   buf[0] = (scan >> 8) & 0xFF;
-   buf[1] = scan & 0xFF;
-   (void) SLang_buffer_keystring (buf, 2);
-   return 0;
-}
-
-#endif
diff --git a/mdk-stage1/slang/slimport.c b/mdk-stage1/slang/slimport.c
deleted file mode 100644
index 44b4b25e1..000000000
--- a/mdk-stage1/slang/slimport.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define SLANG_HAS_DYNAMIC_LINKING 1
-
-#ifndef HAVE_DLFCN_H
-# undef SLANG_HAS_DYNAMIC_LINKING
-# define SLANG_HAS_DYNAMIC_LINKING	0
-#endif
-
-/* The rest of this file is in the if block */
-#if SLANG_HAS_DYNAMIC_LINKING
-
-#ifdef HAVE_DLFCN_H
-# include <dlfcn.h>
-#endif
-
-static char *Module_Path;
-#define MODULE_PATH_ENV_NAME	"SLANG_MODULE_PATH"
-#ifndef MODULE_INSTALL_DIR
-# define MODULE_INSTALL_DIR "/usr/local/lib/slang/modules"
-#endif
-
-typedef struct _Handle_Type
-{
-   struct _Handle_Type *next;
-   char *name;
-   VOID_STAR handle;
-   void (*deinit_fun) (void);
-}
-Handle_Type;
-
-static Handle_Type *Handle_List;
-
-static void delete_handles (void)
-{
-   while (Handle_List != NULL)
-     {
-	Handle_Type *next = Handle_List->next;
-
-	if (Handle_List->deinit_fun != NULL)
-	  Handle_List->deinit_fun ();
-	(void) dlclose (Handle_List->handle);
-	SLang_free_slstring (Handle_List->name);
-	SLfree ((char *)Handle_List);
-	Handle_List = next;
-     }
-}
-
-static Handle_Type *save_handle (char *name, VOID_STAR h, void (*df)(void))
-{
-   Handle_Type *l;
-
-   l = (Handle_Type *) SLmalloc (sizeof (Handle_Type));
-   if (l == NULL)
-     return NULL;
-   memset ((char *) l, 0, sizeof(Handle_Type));
-   if (NULL == (l->name = SLang_create_slstring (name)))
-     {
-	SLfree ((char *) l);
-	return NULL;
-     }
-   l->handle = h;
-   l->next = Handle_List;
-   l->deinit_fun = df;
-   Handle_List = l;
-
-   return l;
-}
-
-static Handle_Type *find_handle (char *name)
-{
-   Handle_Type *l;
-
-   l = Handle_List;
-   while (l != NULL)
-     {
-	if (0 == strcmp (l->name, name))
-	  break;
-	l = l->next;
-     }
-   return l;
-}
-
-static int import_from_library (char *name, 
-				char *init_fun_name, char *deinit_fun_name,
-				char *file,
-				char *ns,
-				char *ns_init_fun_name)
-{
-   VOID_STAR handle;
-   int (*init_fun) (void);
-   int (*ns_init_fun) (char *);
-   void (*deinit_fun) (void);
-   char *err;
-   char filebuf[1024];
-   char *fun_name;
-
-   if (NULL != find_handle (name))
-     return 0;			       /* already loaded */
-
-   while (1)
-     {
-#ifndef RTLD_GLOBAL
-# define RTLD_GLOBAL 0
-#endif
-#ifdef RTLD_NOW
-	handle = (VOID_STAR) dlopen (file, RTLD_NOW | RTLD_GLOBAL);
-#else
-	handle = (VOID_STAR) dlopen (file, RTLD_LAZY | RTLD_GLOBAL);
-#endif
-
-	if (handle != NULL)
-	  break;
-
-	if (NULL == strchr (file, '/'))
-	  {
-	     _SLsnprintf (filebuf, sizeof (filebuf), "./%s", file);
-	     file = filebuf;
-	     continue;
-	  }
-
-	if (NULL == (err = (char *) dlerror ()))
-	  err = "UNKNOWN";
-
-	SLang_verror (SL_INTRINSIC_ERROR,
-		      "Error linking to %s: %s", file, err);
-	return -1;
-     }
-
-   fun_name = ns_init_fun_name;
-   ns_init_fun = (int (*)(char *)) dlsym (handle, fun_name);
-   if (ns_init_fun == NULL) 
-     {
-	if ((ns != NULL) 
-	    && (0 != strcmp (ns, "Global")))
-	  goto return_error;
-	
-	fun_name = init_fun_name;
-	init_fun = (int (*)(void)) dlsym (handle, fun_name);
-	if (init_fun == NULL)
-	  goto return_error;
-	
-	if (-1 == (*init_fun) ())
-	  {
-	     dlclose (handle);
-	     return -1;
-	  }
-     }
-   else if (-1 == (*ns_init_fun) (ns))
-     {
-	dlclose (handle);
-	return -1;
-     }
-
-
-   deinit_fun = (void (*)(void)) dlsym (handle, deinit_fun_name);
-
-   (void) save_handle (name, handle, deinit_fun);
-   return 0;
-
-   return_error:
-   
-   if (NULL == (err = (char *) dlerror ()))
-     err = "UNKNOWN";
-
-   dlclose (handle);
-   SLang_verror (SL_INTRINSIC_ERROR,
-		 "Unable to get symbol %s from %s: %s",
-		 name, file, err);
-   return -1;
-}
-
-static void import_module (void)
-{
-   char module_name[256];
-   char symbol_name[256];
-   char deinit_name[256];
-   char ns_init_name[256];
-   char *path;
-   char *file;
-   char *module;
-   char *ns = NULL;
-
-   if (SLang_Num_Function_Args == 2)
-     {
-	if (-1 == SLang_pop_slstring (&ns))
-	  return;	
-     }
-   
-   if (-1 == SLang_pop_slstring (&module))
-     {
-	SLang_free_slstring (ns);      /* NULL ok */
-	return;
-     }
-
-   _SLsnprintf (symbol_name, sizeof(symbol_name), "init_%s_module", module);
-   _SLsnprintf (module_name, sizeof(module_name), "%s-module.so", module);
-   _SLsnprintf (deinit_name, sizeof(deinit_name), "deinit_%s_module", module);
-   _SLsnprintf (ns_init_name, sizeof (ns_init_name), "init_%s_module_ns", module);
-
-   if (Module_Path != NULL)
-     file = SLpath_find_file_in_path (Module_Path, module_name);
-   else file = NULL;
-
-   if ((file == NULL)
-       && (NULL != (path = getenv (MODULE_PATH_ENV_NAME))))
-     file = SLpath_find_file_in_path (path, module_name);
-
-   if (file == NULL)
-     file = SLpath_find_file_in_path (MODULE_INSTALL_DIR, module_name);
-
-   if (file != NULL)
-     {
-	(void) import_from_library (symbol_name, symbol_name, deinit_name, file, ns, ns_init_name);
-	SLfree (file);
-     }
-   else
-     {
-	/* Maybe the system loader can find it in LD_LIBRARY_PATH */
-	(void) import_from_library (symbol_name, symbol_name, deinit_name, module_name, ns, ns_init_name);
-     }
-}
-
-static void set_import_module_path (char *path)
-{
-   (void) SLang_set_module_load_path (path);
-}
-
-static char *get_import_module_path (void)
-{
-   char *path;
-   if (Module_Path != NULL)
-     return Module_Path;
-   if (NULL != (path = getenv (MODULE_PATH_ENV_NAME)))
-     return path;
-   return MODULE_INSTALL_DIR;
-}
-
-static SLang_Intrin_Fun_Type Module_Intrins [] =
-{
-   MAKE_INTRINSIC_0("import", import_module, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("set_import_module_path", set_import_module_path, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("get_import_module_path", get_import_module_path, SLANG_STRING_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-#endif				       /* SLANG_HAS_DYNAMIC_LINKING */
-
-int SLang_set_module_load_path (char *path)
-{
-#if SLANG_HAS_DYNAMIC_LINKING
-   if (NULL == (path = SLang_create_slstring (path)))
-     return -1;
-   SLang_free_slstring (Module_Path);
-   Module_Path = path;
-   return 0;
-#else
-   (void) path;
-   return -1;
-#endif
-}
-
-int SLang_init_import (void)
-{
-#if SLANG_HAS_DYNAMIC_LINKING
-   (void) SLang_add_cleanup_function (delete_handles);
-   return SLadd_intrin_fun_table (Module_Intrins, "__IMPORT__");
-#else
-   return 0;
-#endif
-}
diff --git a/mdk-stage1/slang/slinclud.h b/mdk-stage1/slang/slinclud.h
deleted file mode 100644
index d60a4423e..000000000
--- a/mdk-stage1/slang/slinclud.h
+++ /dev/null
@@ -1,26 +0,0 @@
-#ifndef _SLANG_INCLUDE_H_
-#define _SLANG_INCLUDE_H_
-
-#include "config.h"
-#include "sl-feat.h"
-
-#include <stdio.h>
-#include <string.h>
-
-#ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-#endif
-
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif
-
-#ifdef HAVE_MALLOC_H
-# include <malloc.h>
-#endif
-
-#ifdef HAVE_MEMORY_H
-# include <memory.h>
-#endif
-
-#endif				       /* _SLANG_INCLUDE_H_ */
diff --git a/mdk-stage1/slang/slintall.c b/mdk-stage1/slang/slintall.c
deleted file mode 100644
index a66b9d6d2..000000000
--- a/mdk-stage1/slang/slintall.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_init_all (void)
-{
-   if ((-1 == SLang_init_slang ())
-       || (-1 == SLang_init_slmath ())
-       || (-1 == SLang_init_posix_dir ())
-       || (-1 == SLang_init_posix_process ())
-       || (-1 == SLang_init_stdio ())
-       || (-1 == SLang_init_array ())
-       || (-1 == SLang_init_posix_io ())
-       || (-1 == SLang_init_ospath ())
-       )
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slistruc.c b/mdk-stage1/slang/slistruc.c
deleted file mode 100644
index 06b8fd6ff..000000000
--- a/mdk-stage1/slang/slistruc.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/* Intrinsic Structure type implementation */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Intrinsic structures */
-
-typedef struct
-{
-   char *name;
-   VOID_STAR addr;
-   SLang_IStruct_Field_Type *fields;
-}
-_SLang_IStruct_Type;
-
-static SLang_IStruct_Field_Type *istruct_pop_field (char *name, int no_readonly, VOID_STAR *addr)
-{
-   _SLang_IStruct_Type *s;
-   SLang_IStruct_Field_Type *f;
-   char *struct_addr;
-
-   /* Note: There is no need to free this object */
-   if (-1 == SLclass_pop_ptr_obj (SLANG_ISTRUCT_TYPE, (VOID_STAR *) &s))
-     return NULL;
-
-   if (NULL == (struct_addr = *(char **)s->addr))
-     {
-	SLang_verror (SL_INTRINSIC_ERROR,
-		      "%s is NULL.  Unable to access field", s->name);
-	return NULL;
-     }
-
-   f = s->fields;
-   while (f->field_name != NULL)
-     {
-	/* Since both these are slstrings, just test pointers */
-	if (f->field_name != name)
-	  {
-	     f++;
-	     continue;
-	  }
-
-	if (no_readonly && f->read_only)
-	  {
-	     SLang_verror (SL_READONLY_ERROR,
-			   "%s.%s is read-only", s->name, name);
-	     return NULL;
-	  }
-
-	*addr = (VOID_STAR) (struct_addr + f->offset);
-	return f;
-     }
-
-   SLang_verror (SL_TYPE_MISMATCH,
-		 "%s has no field called %s", s->name, name);
-   return NULL;
-}
-
-static int istruct_sget (unsigned char type, char *name)
-{
-   SLang_IStruct_Field_Type *f;
-   VOID_STAR addr;
-   SLang_Class_Type *cl;
-
-   if (NULL == (f = istruct_pop_field (name, 0, &addr)))
-     return -1;
-
-   type = f->type;
-   cl = _SLclass_get_class (type);
-
-   return (cl->cl_push_intrinsic)(f->type, addr);
-}
-
-static int istruct_sput (unsigned char type, char *name)
-{
-   SLang_IStruct_Field_Type *f;
-   VOID_STAR addr;
-   SLang_Class_Type *cl;
-
-   if (NULL == (f = istruct_pop_field (name, 1, &addr)))
-     return -1;
-
-   type = f->type;
-   cl = _SLclass_get_class (type);
-
-   return (*cl->cl_pop) (type, addr);
-}
-
-static int istruct_push (unsigned char type, VOID_STAR ptr)
-{
-   _SLang_IStruct_Type *s;
-
-   s = *(_SLang_IStruct_Type **) ptr;
-   if ((s == NULL) 
-       || (s->addr == NULL)
-       || (*(char **) s->addr == NULL))
-     return SLang_push_null ();
-
-   return SLclass_push_ptr_obj (type, (VOID_STAR) s);
-}
-
-static int istruct_pop (unsigned char type, VOID_STAR ptr)
-{
-   return SLclass_pop_ptr_obj (type, (VOID_STAR *)ptr);
-}
-
-static void istruct_destroy (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   (void) ptr;
-}
-
-/* Intrinsic struct objects are not stored in a variable. So, the address that
- * is passed here is actually a pointer to the struct.  So, pass its address
- * to istruct_push since v is a variable.  Confusing, n'est pas?
- */
-static int istruct_push_intrinsic (unsigned char type, VOID_STAR v)
-{
-   return istruct_push (type, (VOID_STAR) &v);
-}
-
-static int init_intrin_struct (void)
-{
-   SLang_Class_Type *cl;
-   static int initialized;
-
-   if (initialized)
-     return 0;
-
-   if (NULL == (cl = SLclass_allocate_class ("IStruct_Type")))
-     return -1;
-
-   cl->cl_pop = istruct_pop;
-   cl->cl_push = istruct_push;
-   cl->cl_sget = istruct_sget;
-   cl->cl_sput = istruct_sput;
-   cl->cl_destroy = istruct_destroy;
-   cl->cl_push_intrinsic = istruct_push_intrinsic;
-
-   if (-1 == SLclass_register_class (cl, SLANG_ISTRUCT_TYPE, sizeof (_SLang_IStruct_Type *),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   initialized = 1;
-   return 0;
-}
-
-int SLadd_istruct_table (SLang_IStruct_Field_Type *fields, VOID_STAR addr, char *name)
-{
-   _SLang_IStruct_Type *s;
-   SLang_IStruct_Field_Type *f;
-
-   if (-1 == init_intrin_struct ())
-     return -1;
-
-   if (addr == NULL)
-     {
-	SLang_verror (SL_INVALID_PARM,
-		      "SLadd_istruct_table: address must be non-NULL");
-	return -1;
-     }
-
-   if (fields == NULL)
-     return -1;
-
-   /* Make the field names slstrings so that only the pointers need to be
-    * compared.  However, this table may have been already been added for
-    * another instance of the intrinsic object.  So, check for the presence
-    * of an slstring.
-    */
-   f = fields;
-   while (f->field_name != NULL)
-     {
-	char *fname;
-
-	fname = SLang_create_slstring (f->field_name);
-	if (fname == NULL)
-	  return -1;
-
-	/* Here is the check for the slstring */
-	if (f->field_name == fname)
-	  SLang_free_slstring (fname);
-	else /* replace string literal with slstring */
-	  f->field_name = fname;
-
-	f++;
-     }
-
-   s = (_SLang_IStruct_Type *)SLmalloc (sizeof (_SLang_IStruct_Type));
-   if (s == NULL)
-     return -1;
-
-   memset ((char *)s, 0, sizeof (_SLang_IStruct_Type));
-   if (NULL == (s->name = SLang_create_slstring (name)))
-     {
-	SLfree ((char *) s);
-	return -1;
-     }
-
-   s->addr = addr;
-   s->fields = fields;
-
-   if (-1 == SLadd_intrinsic_variable (name, (VOID_STAR) s, SLANG_ISTRUCT_TYPE, 1))
-     {
-	SLang_free_slstring (s->name);
-	SLfree ((char *) s);
-	return -1;
-     }
-
-   return 0;
-}
diff --git a/mdk-stage1/slang/slkeymap.c b/mdk-stage1/slang/slkeymap.c
deleted file mode 100644
index dff65433e..000000000
--- a/mdk-stage1/slang/slkeymap.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/* Keymap routines for SLang.  The role of these keymap routines is simple:
- * Just read keys from the tty and return a pointer to a keymap structure.
- * That is, a keymap is simple a mapping of strings (keys from tty) to
- * structures.  Also included are routines for managing the keymaps.
- */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* We need a define a rule for upperand lower case chars that user cannot
-   change!  This could be a problem for international chars! */
-
-#define UPPER_CASE_KEY(x) (((x) >= 'a') && ((x) <= 'z') ? (x) - 32 : (x))
-#define LOWER_CASE_KEY(x) (((x) >= 'A') && ((x) <= 'Z') ? (x) + 32 : (x))
-
-int SLang_Key_TimeOut_Flag = 0;	       /* true if more than 1 sec has elapsed
-                                          without key in multikey sequence */
-
-int SLang_Last_Key_Char;
-
-SLKeyMap_List_Type SLKeyMap_List[SLANG_MAX_KEYMAPS];
-
-static SLang_Key_Type *malloc_key(unsigned char *str)
-{
-   SLang_Key_Type *neew;
-
-   if (NULL == (neew = (SLang_Key_Type *) SLmalloc(sizeof(SLang_Key_Type))))
-     return NULL;
-
-   SLMEMSET ((char *) neew, 0, sizeof (SLang_Key_Type));
-   SLMEMCPY((char *) neew->str, (char *) str, (unsigned int) *str);
-   return(neew);
-}
-
-static SLKeyMap_List_Type *add_keymap (char *name, SLang_Key_Type *map)
-{
-   int i;
-
-   for (i = 0; i < SLANG_MAX_KEYMAPS; i++)
-     {
-	if (SLKeyMap_List[i].keymap == NULL)
-	  {
-	     if (NULL == (name = SLang_create_slstring (name)))
-	       return NULL;
-
-	     SLKeyMap_List[i].keymap = map;
-	     SLKeyMap_List[i].name = name;
-	     return &SLKeyMap_List[i];
-	  }
-     }
-   SLang_Error = SL_UNKNOWN_ERROR;
-   /* SLang_doerror ("Keymap quota exceeded."); */
-   return NULL;
-}
-
-FVOID_STAR SLang_find_key_function(char *name, SLKeyMap_List_Type *keymap)
-{
-   SLKeymap_Function_Type *fp = keymap -> functions;
-   char ch = *name;
-
-   while ((fp != NULL) && (fp->name != NULL))
-     {
-	if ((ch == *fp->name)
-	    && (0 == strcmp(fp->name, name)))
-	  return (FVOID_STAR) fp->f;
-
-	fp++;
-     }
-   return NULL;
-}
-
-#ifdef REAL_UNIX_SYSTEM
-/* Expand termcap string specified by s.  s as passed will have the format:
- *   "XY)..."  where XY represents a termcap keyname.
- */
-static char *process_termcap_string (char *s, char *str, int *ip, int imax)
-{
-   char c[3], *val;
-   int i;
-
-   if ((0 == (c[0] = s[0]))
-       || (0 == (c[1] = s[1]))
-       || (s[2] != ')'))
-     {
-	SLang_verror (SL_SYNTAX_ERROR, "setkey: ^(%s is badly formed", s);
-	return NULL;
-     }
-   s += 3;
-
-   c[2] = 0;
-   if ((NULL == (val = SLtt_tgetstr (c)))
-       || (*val == 0))
-     return NULL;
-
-   i = *ip;
-   while ((i < imax) && (*val != 0))
-     {
-	str[i++] = *val++;
-     }
-   *ip = i;
-
-   return s;
-}
-#endif
-
-/* convert things like "^A" to 1 etc... The 0th char is the strlen INCLUDING
- * the length character itself.
- */
-char *SLang_process_keystring(char *s)
-{
-   /* FIXME: v2.0, make this thread safe */
-   static char str[32];
-   unsigned char ch;
-   int i;
-
-   i = 1;
-   while (*s != 0)
-     {
-	ch = (unsigned char) *s++;
-	if (ch == '^')
-	  {
-	     ch = *s++;
-	     if (ch == 0)
-	       {
-		  if (i < 32)
-		    str[i++] = '^';
-		  break;
-	       }
-#ifdef REAL_UNIX_SYSTEM
-	     if (ch == '(')
-	       {
-		  s = process_termcap_string (s, str, &i, 32);
-		  if (s == NULL)
-		    {
-		       str[0] = 1;
-		       return str;
-		    }
-		  continue;
-	       }
-#endif
-	     ch = UPPER_CASE_KEY(ch);
-	     if (ch == '?') ch = 127; else ch = ch - 'A' + 1;
-	  }
-
-	if (i >= 32) break;
-	str[i++] = ch;
-     }
-
-   if (i > SLANG_MAX_KEYMAP_KEY_SEQ)
-     {
-	SLang_verror (SL_INVALID_PARM, "Key sequence is too long");
-	return NULL;
-     }
-
-   str[0] = i;
-   return(str);
-}
-
-static int key_string_compare (unsigned char *a, unsigned char *b, unsigned int len)
-{
-   unsigned char *amax = a + len;
-   int cha, chb, cha_up, chb_up;
-
-   while (a < amax)
-     {
-	cha = *a++;
-	chb = *b++;
-
-	if (cha == chb) continue;
-
-	cha_up = UPPER_CASE_KEY(cha);
-	chb_up = UPPER_CASE_KEY(chb);
-
-	if (cha_up == chb_up)
-	  {
-	     /* Use case-sensitive result. */
-	     return cha - chb;
-	  }
-	/* Use case-insensitive result. */
-	return cha_up - chb_up;
-     }
-   return 0;
-}
-
-static char *Define_Key_Error = "Inconsistency in define key.";
-
-/* This function also performs an insertion in an ordered way. */
-static int find_the_key (char *s, SLKeyMap_List_Type *kml, SLang_Key_Type **keyp)
-{
-   unsigned char ch;
-   unsigned int str_len;
-   SLang_Key_Type *key, *last, *neew;
-   unsigned char *str;
-
-   *keyp = NULL;
-
-   if (NULL == (str = (unsigned char *) SLang_process_keystring(s)))
-     return -2;
-
-   if (1 == (str_len = str[0]))
-     return 0;
-
-   ch = str[1];
-   key = kml->keymap + ch;
-
-   if (str_len == 2)
-     {
-	if (key->next != NULL)
-	  {
-	     SLang_doerror (Define_Key_Error);
-	     return -2;
-	  }
-
-	if (key->type == SLKEY_F_INTERPRET)
-	  SLang_free_slstring (key->f.s);
-
-	key->str[0] = str_len;
-	key->str[1] = ch;
-
-	*keyp = key;
-	return 0;
-     }
-
-   /* insert the key definition */
-   while (1)
-     {
-	int cmp;
-	unsigned int key_len, len;
-
-	last = key;
-	key = key->next;
-
-	if ((key != NULL) && (key->str != NULL))
-	  {
-	     len = key_len = key->str[0];
-	     if (len > str_len) len = str_len;
-
-	     cmp = key_string_compare (str + 1, key->str + 1, len - 1);
-
-	     if (cmp > 0)
-	       continue;
-
-	     if (cmp == 0)
-	       {
-		  if (key_len != str_len)
-		    {
-		       SLang_doerror (Define_Key_Error);
-		       return -2;
-		    }
-
-		  if (key->type == SLKEY_F_INTERPRET)
-		    SLang_free_slstring (key->f.s);
-
-		  *keyp = key;
-		  return 0;
-	       }
-	     /* Drop to cmp < 0 case */
-	  }
-
-	if (NULL == (neew = malloc_key(str))) return -1;
-
-	neew -> next = key;
-	last -> next = neew;
-
-	*keyp = neew;
-	return 0;
-     }
-}
-
-/* returns -2 if inconsistent, -1 if malloc error, 0 upon success */
-int SLkm_define_key (char *s, FVOID_STAR f, SLKeyMap_List_Type *kml)
-{
-   SLang_Key_Type *key;
-   unsigned int type = SLKEY_F_INTRINSIC;
-   int ret;
-
-   ret = find_the_key (s, kml, &key);
-   if ((ret != 0) || (key == NULL))
-     return ret;
-
-   key->type = type;
-   key->f.f = f;
-   return 0;
-}
-
-int SLang_define_key (char *s, char *funct, SLKeyMap_List_Type *kml)
-{
-   SLang_Key_Type *key;
-   FVOID_STAR f;
-   int ret;
-
-   ret = find_the_key (s, kml, &key);
-   if ((ret != 0) || (key == NULL))
-     return ret;
-
-   f = SLang_find_key_function(funct, kml);
-
-   if (f == NULL)                      /* assume interpreted */
-     {
-	char *str = SLang_create_slstring (funct);
-	if (str == NULL) return -1;
-	key->type = SLKEY_F_INTERPRET;
-	key->f.s = str;
-     }
-   else
-     {
-	key->type = SLKEY_F_INTRINSIC;
-	key->f.f = f;
-     }
-   return 0;
-}
-
-int SLkm_define_keysym (char *s, unsigned int keysym, SLKeyMap_List_Type *kml)
-{
-   SLang_Key_Type *key;
-   int ret;
-
-   ret = find_the_key (s, kml, &key);
-
-   if ((ret != 0) || (key == NULL))
-     return ret;
-
-   key->type = SLKEY_F_KEYSYM;
-   key->f.keysym = keysym;
-   return 0;
-}
-
-SLang_Key_Type *SLang_do_key(SLKeyMap_List_Type *kml, int (*getkey)(void))
-{
-   register SLang_Key_Type *key, *next, *kmax;
-   unsigned int len;
-   unsigned char input_ch;
-   register unsigned char chup, chlow;
-   unsigned char key_ch = 0;
-
-   SLang_Last_Key_Char = (*getkey)();
-   SLang_Key_TimeOut_Flag = 0;
-
-   if (SLANG_GETKEY_ERROR == (unsigned int) SLang_Last_Key_Char)
-     return NULL;
-
-   input_ch = (unsigned char) SLang_Last_Key_Char;
-
-   key = (SLang_Key_Type *) &((kml->keymap)[input_ch]);
-
-   /* if the next one is null, then we know this MAY be it. */
-   while (key->next == NULL)
-     {
-	if (key->type != 0)
-	  return key;
-
-	/* Try its opposite case counterpart */
-	chlow = LOWER_CASE_KEY(input_ch);
-	if (input_ch == chlow)
-	  input_ch = UPPER_CASE_KEY(input_ch);
-
-	key = kml->keymap + input_ch;
-	if (key->type == 0)
-	  return NULL;
-     }
-
-   /* It appears to be a prefix character in a key sequence. */
-
-   len = 1;			       /* already read one character */
-   key = key->next;		       /* Now we are in the key list */
-   kmax = NULL;			       /* set to end of list */
-
-   while (1)
-     {
-	SLang_Key_TimeOut_Flag = 1;
-	SLang_Last_Key_Char = (*getkey)();
-	SLang_Key_TimeOut_Flag = 0;
-
-	len++;
-
-	if ((SLANG_GETKEY_ERROR == (unsigned int) SLang_Last_Key_Char)
-	    || SLKeyBoard_Quit)
-	  break;
-
-	input_ch = (unsigned char) SLang_Last_Key_Char;
-
-	chup = UPPER_CASE_KEY(input_ch); chlow = LOWER_CASE_KEY(input_ch);
-
-	while (key != kmax)
-	  {
-	     if (key->str[0] > len)
-	       {
-		  key_ch = key->str[len];
-		  if (chup == UPPER_CASE_KEY(key_ch))
-		    break;
-	       }
-	     key = key->next;
-	  }
-
-	if (key == kmax) break;
-
-	/* If the input character is lowercase, check to see if there is
-	 * a lowercase match.  If so, set key to it.  Note: the
-	 * algorithm assumes the sorting performed by key_string_compare.
-	 */
-	if (input_ch != key_ch)
-	  {
-	     next = key->next;
-	     while (next != kmax)
-	       {
-		  if (next->str[0] > len)
-		    {
-		       unsigned char next_ch = next->str[len];
-		       if (next_ch == input_ch)
-			 {
-			    key = next;
-			    break;
-			 }
-		       if (next_ch != chup)
-			 break;
-		    }
-		  next = next->next;
-	       }
-	  }
-
-	/* Ok, we found the first position of a possible match.  If it
-	 * is exact, we are done.
-	 */
-	if ((unsigned int) key->str[0] == len + 1)
-	  return key;
-
-	/* Apparantly, there are some ambiguities. Read next key to resolve
-	 * the ambiguity.  Adjust kmax to encompass ambiguities.
-	 */
-
-	next = key->next;
-	while (next != kmax)
-	  {
-	     if ((unsigned int) next->str[0] > len)
-	       {
-		  key_ch = next->str[len];
-		  if (chup != UPPER_CASE_KEY(key_ch))
-		    break;
-	       }
-	     next = next->next;
-	  }
-	kmax = next;
-     }
-
-   return NULL;
-}
-
-void SLang_undefine_key(char *s, SLKeyMap_List_Type *kml)
-{
-   int n, i;
-   SLang_Key_Type *key, *next, *last, *key_root, *keymap;
-   unsigned char *str;
-
-   keymap = kml -> keymap;
-   if (NULL == (str = (unsigned char *) SLang_process_keystring(s)))
-     return;
-
-   if (0 == (n = *str++ - 1)) return;
-   i = *str;
-
-   last = key_root = (SLang_Key_Type *) &(keymap[i]);
-   key = key_root->next;
-
-   while (key != NULL)
-     {
-	next = key->next;
-	if (0 == SLMEMCMP ((char *)(key->str + 1), (char *) str, n))
-	  {
-	     if (key->type == SLKEY_F_INTERPRET)
-	       SLang_free_slstring (key->f.s);
-
-	     SLfree((char *) key);
-	     last->next = next;
-	  }
-	else last = key;
-	key = next;
-     }
-
-   if (n == 1)
-     {
-	*key_root->str = 0;
-	key_root->f.f = NULL;
-	key_root->type = 0;
-     }
-}
-
-char *SLang_make_keystring(unsigned char *s)
-{
-   static char buf [3 * SLANG_MAX_KEYMAP_KEY_SEQ + 1];
-   char *b;
-   int n;
-
-   n = *s++ - 1;
-
-   if (n > SLANG_MAX_KEYMAP_KEY_SEQ)
-     {
-	SLang_verror (SL_INVALID_PARM, "Key sequence is too long");
-	return NULL;
-     }
-
-   b = buf;
-   while (n--)
-     {
-	if (*s < 32)
-	  {
-	     *b++ = '^';
-	     *b++ = *s + 'A' - 1;
-	  }
-	else *b++ = *s;
-	s++;
-     }
-   *b = 0;
-   return(buf);
-}
-
-static SLang_Key_Type *copy_keymap(SLKeyMap_List_Type *kml)
-{
-   int i;
-   SLang_Key_Type *neew, *old, *new_root, *km;
-
-   if (NULL == (new_root = (SLang_Key_Type *) SLcalloc(256, sizeof(SLang_Key_Type))))
-     return NULL;
-
-   if (kml == NULL) return new_root;
-   km = kml->keymap;
-
-   for (i = 0; i < 256; i++)
-     {
-	old = &(km[i]);
-	neew = &(new_root[i]);
-
-	if (old->type == SLKEY_F_INTERPRET)
-	  neew->f.s = SLang_create_slstring (old->f.s);
-	else
-	  neew->f.f = old->f.f;
-
-	neew->type = old->type;
-	SLMEMCPY((char *) neew->str, (char *) old->str, (unsigned int) *old->str);
-
-	old = old->next;
-	while (old != NULL)
-	  {
-	     neew->next = malloc_key((unsigned char *) old->str);
-	     neew = neew->next;
-
-	     if (old->type == SLKEY_F_INTERPRET)
-	       neew->f.s = SLang_create_slstring (old->f.s);
-	     else
-	       neew->f.f = old->f.f;
-
-	     neew->type = old->type;
-	     old = old->next;
-	  }
-	neew->next = NULL;
-     }
-   return(new_root);
-}
-
-SLKeyMap_List_Type *SLang_create_keymap(char *name, SLKeyMap_List_Type *map)
-{
-   SLang_Key_Type *neew;
-   SLKeyMap_List_Type *new_map;
-
-   if ((NULL == (neew = copy_keymap(map)))
-       || (NULL == (new_map = add_keymap(name, neew)))) return NULL;
-
-   if (map != NULL) new_map -> functions = map -> functions;
-
-   return new_map;
-}
-
-SLKeyMap_List_Type *SLang_find_keymap(char *name)
-{
-   SLKeyMap_List_Type *kmap, *kmap_max;
-
-   kmap = SLKeyMap_List;
-   kmap_max = kmap + SLANG_MAX_KEYMAPS;
-
-   while (kmap < kmap_max)
-     {
-	if ((kmap->name != NULL)
-	    && (0 == strcmp (kmap->name, name)))
-	  return kmap;
-
-	kmap++;
-     }
-   return NULL;
-}
diff --git a/mdk-stage1/slang/slkeypad.c b/mdk-stage1/slang/slkeypad.c
deleted file mode 100644
index 524dc80fa..000000000
--- a/mdk-stage1/slang/slkeypad.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLKeyMap_List_Type *Keymap_List;
-
-int SLkp_init (void)
-{
-   char esc_seq[10];
-   int i;
-
-   if (NULL == (Keymap_List = SLang_create_keymap ("_SLKeypad", NULL)))
-     return -1;
-
-   esc_seq[1] = 0;
-   for (i = 1; i < 256; i++)
-     {
-	esc_seq[0] = (char) i;
-	SLkm_define_keysym (esc_seq, i, Keymap_List);
-     }
-
-   /* Now add most common ones. */
-#ifndef IBMPC_SYSTEM
-   SLkm_define_keysym ("^@", 0, Keymap_List);
-
-   SLkm_define_keysym ("\033[A", SL_KEY_UP, Keymap_List);
-   SLkm_define_keysym ("\033OA", SL_KEY_UP, Keymap_List);
-   SLkm_define_keysym ("\033[B", SL_KEY_DOWN, Keymap_List);
-   SLkm_define_keysym ("\033OB", SL_KEY_DOWN, Keymap_List);
-   SLkm_define_keysym ("\033[C", SL_KEY_RIGHT, Keymap_List);
-   SLkm_define_keysym ("\033OC", SL_KEY_RIGHT, Keymap_List);
-   SLkm_define_keysym ("\033[D", SL_KEY_LEFT, Keymap_List);
-   SLkm_define_keysym ("\033OD", SL_KEY_LEFT, Keymap_List);
-   SLkm_define_keysym ("\033[2~", SL_KEY_IC, Keymap_List);
-   SLkm_define_keysym ("\033[7~", SL_KEY_HOME, Keymap_List);
-   SLkm_define_keysym ("\033[5~", SL_KEY_PPAGE, Keymap_List);
-   SLkm_define_keysym ("\033[6~", SL_KEY_NPAGE, Keymap_List);
-   SLkm_define_keysym ("\033[8~", SL_KEY_END, Keymap_List);
-   SLkm_define_keysym ("\033[3~", SL_KEY_DELETE, Keymap_List);
-#else
-   /* Note: This will not work if SLgetkey_map_to_ansi (1) has
-    * been called.
-    */
-   SLkm_define_keysym ("^@\x48", SL_KEY_UP, Keymap_List );
-   SLkm_define_keysym ("^@\x50", SL_KEY_DOWN, Keymap_List );
-   SLkm_define_keysym ("^@\x4d", SL_KEY_RIGHT, Keymap_List );
-   SLkm_define_keysym ("^@\x4b", SL_KEY_LEFT, Keymap_List );
-   SLkm_define_keysym ("^@\x47", SL_KEY_HOME, Keymap_List );
-   SLkm_define_keysym ("^@\x49", SL_KEY_PPAGE, Keymap_List );
-   SLkm_define_keysym ("^@\x51", SL_KEY_NPAGE, Keymap_List );
-   SLkm_define_keysym ("^@\x4f", SL_KEY_END, Keymap_List );
-   SLkm_define_keysym ("^@\x52", SL_KEY_IC, Keymap_List );
-   SLkm_define_keysym ("^@\x53", SL_KEY_DELETE, Keymap_List );
-   
-   SLkm_define_keysym ("\xE0\x48", SL_KEY_UP, Keymap_List );
-   SLkm_define_keysym ("\xE0\x50", SL_KEY_DOWN, Keymap_List );
-   SLkm_define_keysym ("\xE0\x4d", SL_KEY_RIGHT, Keymap_List );
-   SLkm_define_keysym ("\xE0\x4b", SL_KEY_LEFT, Keymap_List );
-   SLkm_define_keysym ("\xE0\x47", SL_KEY_HOME, Keymap_List );
-   SLkm_define_keysym ("\xE0\x49", SL_KEY_PPAGE, Keymap_List );
-   SLkm_define_keysym ("\xE0\x51", SL_KEY_NPAGE, Keymap_List );
-   SLkm_define_keysym ("\xE0\x4f", SL_KEY_END, Keymap_List );
-   SLkm_define_keysym ("\xE0\x52", SL_KEY_IC, Keymap_List );
-   SLkm_define_keysym ("\xE0\x53", SL_KEY_DELETE, Keymap_List );
-
-    strcpy (esc_seq, "^@ ");	       /* guarantees esc_seq[3] = 0. */
-
-    for (i = 0x3b; i < 0x45; i++)
-      {
-	 esc_seq [2] = i;
-	 SLkm_define_keysym (esc_seq, SL_KEY_F(i - 0x3a), Keymap_List);
-      }
-   esc_seq[2] = 0x57; SLkm_define_keysym (esc_seq, SL_KEY_F(11), Keymap_List);
-   esc_seq[2] = 0x58; SLkm_define_keysym (esc_seq, SL_KEY_F(12), Keymap_List);
-#endif
-
-#ifdef REAL_UNIX_SYSTEM
-   strcpy (esc_seq, "^(kX)");
-   for (i = 0; i <= 9; i++)
-     {
-	esc_seq[3] = '0' + i;
-	SLkm_define_keysym (esc_seq, SL_KEY_F(i), Keymap_List);
-     }
-   SLkm_define_keysym ("^(k;)", SL_KEY_F(10), Keymap_List);
-
-   SLkm_define_keysym ("^(ku)", SL_KEY_UP, Keymap_List);
-   SLkm_define_keysym ("^(kd)", SL_KEY_DOWN, Keymap_List);
-   SLkm_define_keysym ("^(kl)", SL_KEY_LEFT, Keymap_List);
-   SLkm_define_keysym ("^(kr)", SL_KEY_RIGHT, Keymap_List);
-   SLkm_define_keysym ("^(kP)", SL_KEY_PPAGE, Keymap_List);
-   SLkm_define_keysym ("^(kN)", SL_KEY_NPAGE, Keymap_List);
-   SLkm_define_keysym ("^(kh)", SL_KEY_HOME, Keymap_List);
-   SLkm_define_keysym ("^(@7)", SL_KEY_END, Keymap_List);
-   SLkm_define_keysym ("^(K1)", SL_KEY_A1, Keymap_List);
-   SLkm_define_keysym ("^(K3)", SL_KEY_A3, Keymap_List);
-   SLkm_define_keysym ("^(K2)", SL_KEY_B2, Keymap_List);
-   SLkm_define_keysym ("^(K4)", SL_KEY_C1, Keymap_List);
-   SLkm_define_keysym ("^(K5)", SL_KEY_C3, Keymap_List);
-   SLkm_define_keysym ("^(%0)", SL_KEY_REDO, Keymap_List);
-   SLkm_define_keysym ("^(&8)", SL_KEY_UNDO, Keymap_List);
-   SLkm_define_keysym ("^(kb)", SL_KEY_BACKSPACE, Keymap_List);
-   SLkm_define_keysym ("^(@8)", SL_KEY_ENTER, Keymap_List);
-   SLkm_define_keysym ("^(kD)", SL_KEY_DELETE, Keymap_List);
-#endif
-
-   if (SLang_Error)
-     return -1;
-   return 0;
-}
-
-int SLkp_getkey (void)
-{
-   SLang_Key_Type *key;
-
-   key = SLang_do_key (Keymap_List, (int (*)(void)) SLang_getkey);
-   if ((key == NULL) || (key->type != SLKEY_F_KEYSYM))
-     {
-	SLang_flush_input ();
-	return SL_KEY_ERR;
-     }
-
-   return key->f.keysym;
-}
-
-int SLkp_define_keysym (char *keystr, unsigned int keysym)
-{
-   if (SLkm_define_keysym (keystr, keysym, Keymap_List) < 0)
-     return -1;
-
-   return 0;
-}
-
-#if 0
-int main (int argc, char **argv)
-{
-   int ch;
-
-   SLtt_get_terminfo ();
-
-   if (-1 == SLkp_init ())
-     return 1;
-
-   SLang_init_tty (-1, 0, 0);
-
-   while ('q' != (ch = SLkp_getkey ()))
-     {
-	fprintf (stdout, "Keycode = %d\r\n", ch);
-	fflush (stdout);
-     }
-
-   SLang_reset_tty ();
-
-   return 0;
-}
-#endif
-
diff --git a/mdk-stage1/slang/sllimits.h b/mdk-stage1/slang/sllimits.h
deleted file mode 100644
index c4ae03b83..000000000
--- a/mdk-stage1/slang/sllimits.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-/* sllimits.h */
-
-/* slstring.c: Size of the hash table used for strings (prime numbers) */
-#ifdef __MSDOS_16BIT__
-# define SLSTRING_HASH_TABLE_SIZE	601
-# define SLASSOC_HASH_TABLE_SIZE	601
-#else
-# define SLSTRING_HASH_TABLE_SIZE	2909
-# define SLASSOC_HASH_TABLE_SIZE 	2909
-#endif
-
-/* slang.c: maximum size of run time stack */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_STACK_LEN		500
-#else
-# define SLANG_MAX_STACK_LEN		2500
-#endif
-
-/* slang.c: This sets the size on the depth of function calls */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_RECURSIVE_DEPTH	50
-#else
-# define SLANG_MAX_RECURSIVE_DEPTH	250
-#endif
-
-/* slang.c: Size of the stack used for local variables */
-#ifdef __MSDOS_16BIT__
-# define SLANG_MAX_LOCAL_STACK		200
-#else
-# define SLANG_MAX_LOCAL_STACK		1024
-#endif
-
-/* slang.c: The size of the hash table used for local and global objects.
- * These should be prime numbers.
- */
-#define SLGLOBALS_HASH_TABLE_SIZE	2909
-#define SLLOCALS_HASH_TABLE_SIZE	73
-#define SLSTATIC_HASH_TABLE_SIZE	73
-
-/* Size of the keyboard buffer use by the ungetkey routines */
-#ifdef __MSDOS_16BIT__
-# define SL_MAX_INPUT_BUFFER_LEN	40
-#else
-# define SL_MAX_INPUT_BUFFER_LEN	1024
-#endif
-
-/* Maximum number of nested switch statements */
-#define SLANG_MAX_NESTED_SWITCH		10
-
-/* Size of the block stack (used in byte-compiling) */
-#define SLANG_MAX_BLOCK_STACK_LEN	50
-
-/* slfile.c: Max number of open file pointers */
-#ifdef __MSDOS_16BIT__
-# define SL_MAX_FILES			32
-#else
-# define SL_MAX_FILES			256
-#endif
diff --git a/mdk-stage1/slang/slmalloc.c b/mdk-stage1/slang/slmalloc.c
deleted file mode 100644
index be4ed6cae..000000000
--- a/mdk-stage1/slang/slmalloc.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#ifdef SL_MALLOC_DEBUG
-# undef SL_MALLOC_DEBUG
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef __alpha
-# define Chunk 8
-#else
-# define Chunk 4
-#endif
-
-static long Total_Allocated;
-static long Max_Single_Allocation;
-static long Max_Allocated;
-/* #define SLDEBUG_DOUT */
-
-#ifdef SLDEBUG_DOUT
-static FILE *dout;
-#endif
-
-void SLmalloc_dump_statistics (void)
-{
-#ifdef SLDEBUG_DOUT
-   fflush (dout);
-#endif
-   fprintf (stderr, "Total Allocated: %ld\nHighest single allocation: %ld\nHighest Total Allocated:%ld\n",
-	    Total_Allocated, Max_Single_Allocation, Max_Allocated);
-}
-
-static void register_at_exit_fun (void)
-{
-   static int is_registered = 0;
-   if (is_registered)
-     return;
-   is_registered = 1;
-
-#ifdef SLDEBUG_DOUT
-   if (dout == NULL) dout = fopen ("malloc.out", "w");
-#endif
-   SLang_add_cleanup_function (SLmalloc_dump_statistics);
-}
-
-static void fixup (unsigned char *p, unsigned long n, char *what)
-{
-   register_at_exit_fun ();
-
-   p += Chunk;
-   *(p - 4)= (unsigned char) ((n >> 24) & 0xFF);
-   *(p - 3) = (unsigned char) ((n >> 16) & 0xFF);
-   *(p - 2) = (unsigned char) ((n >> 8) & 0xFF);
-   *(p - 1) = (unsigned char) (n & 0xFF);
-   *(p + (int) n) = 27;
-   *(p + (int) (n + 1)) = 182;
-   *(p + (int) (n + 2)) = 81;
-   *(p + (int) (n + 3)) = 86;
-   Total_Allocated += (long) n;
-   if (Total_Allocated > Max_Allocated) Max_Allocated = Total_Allocated;
-   if ((long) n > Max_Single_Allocation)
-     Max_Single_Allocation = (long) n;
-
-#ifdef SLDEBUG_DOUT
-   fprintf (dout, "ALLOC: %s\t%p %ld\n", what, p, (long) n);
-#else
-   (void) what;
-#endif
-}
-
-static void SLmalloc_doerror (char *buf)
-{
-   SLang_doerror (buf);
-}
-
-static int check_memory (unsigned char *p, char *what)
-{
-   char buf[128];
-   unsigned long n;
-
-   register_at_exit_fun ();
-
-   n = ((unsigned long) *(p - 4)) << 24;
-   n |= ((unsigned long) *(p - 3)) << 16;
-   n |= ((unsigned long) *(p - 2)) << 8;
-   n |= (unsigned long) *(p - 1);
-
-   if (n == 0xFFFFFFFFUL)
-     {
-	sprintf (buf, "%s: %p: Already FREE! Abort NOW.", what, (void*)p - Chunk);
-	SLmalloc_doerror (buf);
-	return -1;
-     }
-
-   if ((*(p + (int) n) != 27)
-       || (*(p + (int) (n + 1)) != 182)
-       || (*(p + (int) (n + 2)) != 81)
-       || (*(p + (int) (n + 3)) != 86))
-     {
-	sprintf (buf, "\007%s: %p: Memory corrupt! Abort NOW.", what, (void*)p);
-	SLmalloc_doerror (buf);
-	return -1;
-     }
-
-   *(p - 4) = *(p - 3) = *(p - 2) = *(p - 1) = 0xFF;
-
-   Total_Allocated -= (long) n;
-   if (Total_Allocated < 0)
-     {
-	sprintf (buf, "\007%s: %p\nFreed %ld, Allocated is: %ld!\n",
-		 what, (void*)p, (long) n, Total_Allocated);
-	SLang_doerror (buf);
-     }
-#ifdef SLDEBUG_DOUT
-   fprintf (dout, "FREE: %s:\t%p %ld\n", what, p, (long) n);
-#endif
-   return 0;
-}
-
-void SLdebug_free (char *p)
-{
-   if (p == NULL) return;
-   if (-1 == check_memory ((unsigned char *) p, "FREE")) return;
-
-   SLFREE (p - Chunk);
-}
-
-char *SLdebug_malloc (unsigned long n)
-{
-   char *p;
-
-   if ((p = (char *) SLMALLOC (n + 2 * Chunk)) == NULL) return NULL;
-
-   fixup ((unsigned char *) p, n, "MALLOC");
-   return p + Chunk;
-}
-
-char *SLdebug_realloc (char *p, unsigned long n)
-{
-   if (-1 == check_memory ((unsigned char *) p, "REALLOC")) return NULL;
-   if ((p = (char *) SLREALLOC (p - Chunk, n + 2 * Chunk)) == NULL) return NULL;
-   fixup ((unsigned char *) p, n, "REALLOC");
-   return p + Chunk;
-}
-
-char *SLdebug_calloc (unsigned long n, unsigned long size)
-{
-   char *p;
-   int m;
-
-   /* This is tough -- hope this is a good assumption!! */
-   if (size >= Chunk) m = 1; else m = Chunk;
-
-   if ((p = (char *) SLCALLOC (n + m + m, size)) == NULL) return NULL;
-   fixup ((unsigned char *) p, size * n, "CALLOC");
-   return p + Chunk;
-}
-
diff --git a/mdk-stage1/slang/slmath.c b/mdk-stage1/slang/slmath.c
deleted file mode 100644
index 1d61e14d3..000000000
--- a/mdk-stage1/slang/slmath.c
+++ /dev/null
@@ -1,565 +0,0 @@
-/* sin, cos, etc, for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <math.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef PI
-# undef PI
-#endif
-#define PI 3.14159265358979323846264338327950288
-
-#if defined(__unix__)
-#include <signal.h>
-#include <errno.h>
-
-#define SIGNAL  SLsignal
-
-static void math_floating_point_exception (int sig)
-{
-   sig = errno;
-   if (SLang_Error == 0) SLang_Error = SL_FLOATING_EXCEPTION;
-   (void) SIGNAL (SIGFPE, math_floating_point_exception);
-   errno = sig;
-}
-#endif
-
-double SLmath_hypot (double x, double y)
-{
-   double fr, fi, ratio;
-
-   fr = fabs(x);
-   fi = fabs(y);
-
-   if (fr > fi)
-     {
-	ratio = y / x;
-	x = fr * sqrt (1.0 + ratio * ratio);
-     }
-   else if (fi == 0.0) x = 0.0;
-   else
-     {
-	ratio = x / y;
-	x = fi * sqrt (1.0 + ratio * ratio);
-     }
-
-   return x;
-}
-
-/* usage here is a1 a2 ... an n x ==> a1x^n + a2 x ^(n - 1) + ... + an */
-static double math_poly (void)
-{
-   int n;
-   double xn = 1.0, sum = 0.0;
-   double an, x;
-
-   if ((SLang_pop_double(&x, NULL, NULL))
-       || (SLang_pop_integer(&n))) return(0.0);
-
-   while (n-- > 0)
-     {
-	if (SLang_pop_double(&an, NULL, NULL)) break;
-	sum += an * xn;
-	xn = xn * x;
-     }
-   return (double) sum;
-}
-
-static int double_math_op_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) op;
-
-   if (a != SLANG_FLOAT_TYPE)
-     *b = SLANG_DOUBLE_TYPE;
-   else
-     *b = a;
-
-   return 1;
-}
-
-#ifdef HAVE_ASINH
-# define ASINH_FUN	asinh
-#else
-# define ASINH_FUN	my_asinh
-static double my_asinh (double x)
-{
-   return log (x + sqrt (x*x + 1));
-}
-#endif
-#ifdef HAVE_ACOSH
-# define ACOSH_FUN	acosh
-#else
-# define ACOSH_FUN	my_acosh
-static double my_acosh (double x)
-{
-   return log (x + sqrt(x*x - 1));     /* x >= 1 */
-}
-#endif
-#ifdef HAVE_ATANH
-# define ATANH_FUN	atanh
-#else
-# define ATANH_FUN	my_atanh
-static double my_atanh (double x)
-{
-   return 0.5 * log ((1.0 + x)/(1.0 - x)); /* 0 <= x^2 < 1 */
-}
-#endif
-
-static int double_math_op (int op,
-			   unsigned char type, VOID_STAR ap, unsigned int na,
-			   VOID_STAR bp)
-{
-   double *a, *b;
-   unsigned int i;
-   double (*fun) (double);
-
-   (void) type;
-   a = (double *) ap;
-   b = (double *) bp;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLMATH_SINH:
-	fun = sinh;
-	break;
-      case SLMATH_COSH:
-	fun = cosh;
-	break;
-      case SLMATH_TANH:
-	fun = tanh;
-	break;
-      case SLMATH_TAN:
-	fun = tan;
-	break;
-      case SLMATH_ASIN:
-	fun = asin;
-	break;
-      case SLMATH_ACOS:
-	fun = acos;
-	break;
-      case SLMATH_ATAN:
-	fun = atan;
-	break;
-      case SLMATH_EXP:
-	fun = exp;
-	break;
-      case SLMATH_LOG:
-	fun = log;
-	break;
-      case SLMATH_LOG10:
-	fun = log10;
-	break;
-      case SLMATH_SQRT:
-	fun = sqrt;
-	break;
-      case SLMATH_SIN:
-	fun = sin;
-	break;
-      case SLMATH_COS:
-	fun = cos;
-	break;
-
-      case SLMATH_ASINH:
-	fun = ASINH_FUN;
-	break;
-      case SLMATH_ATANH:
-	fun = ATANH_FUN;
-	break;
-      case SLMATH_ACOSH:
-	fun = ACOSH_FUN;
-	break;
-
-      case SLMATH_CONJ:
-      case SLMATH_REAL:
-	for (i = 0; i < na; i++)
-	  b[i] = a[i];
-	return 1;
-      case SLMATH_IMAG:
-	for (i = 0; i < na; i++)
-	  b[i] = 0.0;
-	return 1;
-     }
-
-   for (i = 0; i < na; i++)
-     b[i] = (*fun) (a[i]);
-
-   return 1;
-}
-
-static int float_math_op (int op,
-			  unsigned char type, VOID_STAR ap, unsigned int na,
-			  VOID_STAR bp)
-{
-   float *a, *b;
-   unsigned int i;
-   double (*fun) (double);
-
-   (void) type;
-   a = (float *) ap;
-   b = (float *) bp;
-
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLMATH_SINH:
-	fun = sinh;
-	break;
-      case SLMATH_COSH:
-	fun = cosh;
-	break;
-      case SLMATH_TANH:
-	fun = tanh;
-	break;
-      case SLMATH_TAN:
-	fun = tan;
-	break;
-      case SLMATH_ASIN:
-	fun = asin;
-	break;
-      case SLMATH_ACOS:
-	fun = acos;
-	break;
-      case SLMATH_ATAN:
-	fun = atan;
-	break;
-      case SLMATH_EXP:
-	fun = exp;
-	break;
-      case SLMATH_LOG:
-	fun = log;
-	break;
-      case SLMATH_LOG10:
-	fun = log10;
-	break;
-      case SLMATH_SQRT:
-	fun = sqrt;
-	break;
-      case SLMATH_SIN:
-	fun = sin;
-	break;
-      case SLMATH_COS:
-	fun = cos;
-	break;
-
-      case SLMATH_ASINH:
-	fun = ASINH_FUN;
-	break;
-      case SLMATH_ATANH:
-	fun = ATANH_FUN;
-	break;
-      case SLMATH_ACOSH:
-	fun = ACOSH_FUN;
-	break;
-
-      case SLMATH_CONJ:
-      case SLMATH_REAL:
-	for (i = 0; i < na; i++)
-	  b[i] = a[i];
-	return 1;
-      case SLMATH_IMAG:
-	for (i = 0; i < na; i++)
-	  b[i] = 0.0;
-	return 1;
-     }
-
-   for (i = 0; i < na; i++)
-     b[i] = (float) (*fun) ((double) a[i]);
-
-   return 1;
-}
-
-static int generic_math_op (int op,
-			    unsigned char type, VOID_STAR ap, unsigned int na,
-			    VOID_STAR bp)
-{
-   double *b;
-   unsigned int i;
-   SLang_To_Double_Fun_Type to_double;
-   double (*fun) (double);
-   unsigned int da;
-   char *a;
-
-   if (NULL == (to_double = SLarith_get_to_double_fun (type, &da)))
-     return 0;
-
-   b = (double *) bp;
-   a = (char *) ap;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLMATH_SINH:
-	fun = sinh;
-	break;
-      case SLMATH_COSH:
-	fun = cosh;
-	break;
-      case SLMATH_TANH:
-	fun = tanh;
-	break;
-      case SLMATH_TAN:
-	fun = tan;
-	break;
-      case SLMATH_ASIN:
-	fun = asin;
-	break;
-      case SLMATH_ACOS:
-	fun = acos;
-	break;
-      case SLMATH_ATAN:
-	fun = atan;
-	break;
-      case SLMATH_EXP:
-	fun = exp;
-	break;
-      case SLMATH_LOG:
-	fun = log;
-	break;
-      case SLMATH_LOG10:
-	fun = log10;
-	break;
-      case SLMATH_SQRT:
-	fun = sqrt;
-	break;
-      case SLMATH_SIN:
-	fun = sin;
-	break;
-      case SLMATH_COS:
-	fun = cos;
-	break;
-
-      case SLMATH_ASINH:
-	fun = ASINH_FUN;
-	break;
-      case SLMATH_ATANH:
-	fun = ATANH_FUN;
-	break;
-      case SLMATH_ACOSH:
-	fun = ACOSH_FUN;
-	break;
-
-
-      case SLMATH_CONJ:
-      case SLMATH_REAL:
-	for (i = 0; i < na; i++)
-	  {
-	     b[i] = to_double((VOID_STAR) a);
-	     a += da;
-	  }
-	return 1;
-
-      case SLMATH_IMAG:
-	for (i = 0; i < na; i++)
-	  b[i] = 0.0;
-	return 1;
-     }
-
-   for (i = 0; i < na; i++)
-     {
-	b[i] = (*fun) (to_double ((VOID_STAR) a));
-	a += da;
-     }
-   
-   return 1;
-}
-
-#if SLANG_HAS_COMPLEX
-static int complex_math_op_result (int op, unsigned char a, unsigned char *b)
-{
-   (void) a;
-   switch (op)
-     {
-      default:
-	*b = SLANG_COMPLEX_TYPE;
-	break;
-
-      case SLMATH_REAL:
-      case SLMATH_IMAG:
-	*b = SLANG_DOUBLE_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int complex_math_op (int op,
-			    unsigned char type, VOID_STAR ap, unsigned int na,
-			    VOID_STAR bp)
-{
-   double *a, *b;
-   unsigned int i;
-   unsigned int na2 = na * 2;
-   double *(*fun) (double *, double *);
-
-   (void) type;
-   a = (double *) ap;
-   b = (double *) bp;
-
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLMATH_REAL:
-	for (i = 0; i < na; i++)
-	  b[i] = a[2 * i];
-	return 1;
-
-      case SLMATH_IMAG:
-	for (i = 0; i < na; i++)
-	  b[i] = a[2 * i + 1];
-	return 1;
-
-      case SLMATH_CONJ:
-	for (i = 0; i < na2; i += 2)
-	  {
-	     b[i] = a[i];
-	     b[i+1] = -a[i+1];
-	  }
-	return 1;
-
-      case SLMATH_ATANH:
-	fun = SLcomplex_atanh;
-	break;
-      case SLMATH_ACOSH:
-	fun = SLcomplex_acosh;
-	break;
-      case SLMATH_ASINH:
-	fun = SLcomplex_asinh;
-	break;
-      case SLMATH_EXP:
-	fun = SLcomplex_exp;
-	break;
-      case SLMATH_LOG:
-	fun = SLcomplex_log;
-	break;
-      case SLMATH_LOG10:
-	fun = SLcomplex_log10;
-	break;
-      case SLMATH_SQRT:
-	fun = SLcomplex_sqrt;
-	break;
-      case SLMATH_SIN:
-	fun = SLcomplex_sin;
-	break;
-      case SLMATH_COS:
-	fun = SLcomplex_cos;
-	break;
-      case SLMATH_SINH:
-	fun = SLcomplex_sinh;
-	break;
-      case SLMATH_COSH:
-	fun = SLcomplex_cosh;
-	break;
-      case SLMATH_TANH:
-	fun = SLcomplex_tanh;
-	break;
-      case SLMATH_TAN:
-	fun = SLcomplex_tan;
-	break;
-      case SLMATH_ASIN:
-	fun = SLcomplex_asin;
-	break;
-      case SLMATH_ACOS:
-	fun = SLcomplex_acos;
-	break;
-      case SLMATH_ATAN:
-	fun = SLcomplex_atan;
-	break;
-     }
-
-   for (i = 0; i < na2; i += 2)
-     (void) (*fun) (b + i, a + i);
-
-   return 1;
-}
-#endif
-
-static SLang_DConstant_Type DConst_Table [] =
-{
-   MAKE_DCONSTANT("E", 2.718281828459045),
-   MAKE_DCONSTANT("PI", 3.14159265358979323846264338327950288),
-   SLANG_END_DCONST_TABLE
-};
-
-static SLang_Math_Unary_Type SLmath_Table [] =
-{
-   MAKE_MATH_UNARY("sinh", SLMATH_SINH),
-   MAKE_MATH_UNARY("asinh", SLMATH_ASINH),
-   MAKE_MATH_UNARY("cosh", SLMATH_COSH),
-   MAKE_MATH_UNARY("acosh", SLMATH_ACOSH),
-   MAKE_MATH_UNARY("tanh", SLMATH_TANH),
-   MAKE_MATH_UNARY("atanh", SLMATH_ATANH),
-   MAKE_MATH_UNARY("sin", SLMATH_SIN),
-   MAKE_MATH_UNARY("cos", SLMATH_COS),
-   MAKE_MATH_UNARY("tan", SLMATH_TAN),
-   MAKE_MATH_UNARY("atan", SLMATH_ATAN),
-   MAKE_MATH_UNARY("acos", SLMATH_ACOS),
-   MAKE_MATH_UNARY("asin", SLMATH_ASIN),
-   MAKE_MATH_UNARY("exp", SLMATH_EXP),
-   MAKE_MATH_UNARY("log", SLMATH_LOG),
-   MAKE_MATH_UNARY("sqrt", SLMATH_SQRT),
-   MAKE_MATH_UNARY("log10", SLMATH_LOG10),
-#if SLANG_HAS_COMPLEX
-   MAKE_MATH_UNARY("Real", SLMATH_REAL),
-   MAKE_MATH_UNARY("Imag", SLMATH_IMAG),
-   MAKE_MATH_UNARY("Conj", SLMATH_CONJ),
-#endif
-   SLANG_END_MATH_UNARY_TABLE
-};
-
-static SLang_Intrin_Fun_Type SLang_Math_Table [] =
-{
-   MAKE_INTRINSIC_0("polynom", math_poly, SLANG_DOUBLE_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_slmath (void)
-{
-   unsigned char *int_types;
-
-#if defined(__unix__)
-   (void) SIGNAL (SIGFPE, math_floating_point_exception);
-#endif
-
-   int_types = _SLarith_Arith_Types;
-
-   while (*int_types != SLANG_FLOAT_TYPE)
-     {
-	if (-1 == SLclass_add_math_op (*int_types, generic_math_op, double_math_op_result))
-	  return -1;
-	int_types++;
-     }
-
-   if ((-1 == SLclass_add_math_op (SLANG_FLOAT_TYPE, float_math_op, double_math_op_result))
-       || (-1 == SLclass_add_math_op (SLANG_DOUBLE_TYPE, double_math_op, double_math_op_result))
-#if SLANG_HAS_COMPLEX
-       || (-1 == SLclass_add_math_op (SLANG_COMPLEX_TYPE, complex_math_op, complex_math_op_result))
-#endif
-       )
-     return -1;
-
-   if ((-1 == SLadd_math_unary_table (SLmath_Table, "__SLMATH__"))
-       || (-1 == SLadd_intrin_fun_table (SLang_Math_Table, NULL))
-       || (-1 == SLadd_dconstant_table (DConst_Table, NULL)))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slmemchr.c b/mdk-stage1/slang/slmemchr.c
deleted file mode 100644
index 1417bc549..000000000
--- a/mdk-stage1/slang/slmemchr.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines.  When available, I
-   use system rouines.  For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-char *SLmemchr(register char *p, register char c, register int n)
-{
-   int n2;
-   register char *pmax;
-
-   pmax = p + (n - 32);
-
-   while (p <= pmax)
-     {
-	if ((*p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c)
-	    || (*++p == c) || (*++p == c) || (*++p == c) || (*++p == c))
-	  return p;
-	p++;
-     }
-
-   n2 = n % 32;
-
-   while (n2--)
-     {
-	if (*p == c) return p;
-	p++;
-     }
-   return(NULL);
-}
diff --git a/mdk-stage1/slang/slmemcmp.c b/mdk-stage1/slang/slmemcmp.c
deleted file mode 100644
index c5ed50095..000000000
--- a/mdk-stage1/slang/slmemcmp.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines.  When available, I
-   use system rouines.  For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/* This is an UNSIGNED comparison designed for systems that either do not have
-* this function or performed a signed comparison (SunOS)
-*/
-int SLmemcmp(register char *s1, register char *s2, int n)
-{
-   register int cmp;
-   register char *s1max;
-
-   s1max = s1 + (n - 32);
-
-   while (s1 <= s1max)
-     {
-	if (*s1 != *s2) return ((unsigned char) *s1 - (unsigned char) *s2);
-	if (*(s1 + 1) != *(s2 + 1)) return ((unsigned char) *(s1 + 1) - (unsigned char) *(s2 + 1));
-	if (*(s1 + 2) != *(s2 + 2)) return ((unsigned char) *(s1 + 2) - (unsigned char) *(s2 + 2));
-	if (*(s1 + 3) != *(s2 + 3)) return ((unsigned char) *(s1 + 3) - (unsigned char) *(s2 + 3));
-	if (*(s1 + 4) != *(s2 + 4)) return ((unsigned char) *(s1 + 4) - (unsigned char) *(s2 + 4));
-	if (*(s1 + 5) != *(s2 + 5)) return ((unsigned char) *(s1 + 5) - (unsigned char) *(s2 + 5));
-	if (*(s1 + 6) != *(s2 + 6)) return ((unsigned char) *(s1 + 6) - (unsigned char) *(s2 + 6));
-	if (*(s1 + 7) != *(s2 + 7)) return ((unsigned char) *(s1 + 7) - (unsigned char) *(s2 + 7));
-	if (*(s1 + 8) != *(s2 + 8)) return ((unsigned char) *(s1 + 8) - (unsigned char) *(s2 + 8));
-	if (*(s1 + 9) != *(s2 + 9)) return ((unsigned char) *(s1 + 9) - (unsigned char) *(s2 + 9));
-	if (*(s1 + 10) != *(s2 + 10)) return ((unsigned char) *(s1 + 10) - (unsigned char) *(s2 + 10));
-	if (*(s1 + 11) != *(s2 + 11)) return ((unsigned char) *(s1 + 11) - (unsigned char) *(s2 + 11));
-	if (*(s1 + 12) != *(s2 + 12)) return ((unsigned char) *(s1 + 12) - (unsigned char) *(s2 + 12));
-	if (*(s1 + 13) != *(s2 + 13)) return ((unsigned char) *(s1 + 13) - (unsigned char) *(s2 + 13));
-	if (*(s1 + 14) != *(s2 + 14)) return ((unsigned char) *(s1 + 14) - (unsigned char) *(s2 + 14));
-	if (*(s1 + 15) != *(s2 + 15)) return ((unsigned char) *(s1 + 15) - (unsigned char) *(s2 + 15));
-	if (*(s1 + 16) != *(s2 + 16)) return ((unsigned char) *(s1 + 16) - (unsigned char) *(s2 + 16));
-	if (*(s1 + 17) != *(s2 + 17)) return ((unsigned char) *(s1 + 17) - (unsigned char) *(s2 + 17));
-	if (*(s1 + 18) != *(s2 + 18)) return ((unsigned char) *(s1 + 18) - (unsigned char) *(s2 + 18));
-	if (*(s1 + 19) != *(s2 + 19)) return ((unsigned char) *(s1 + 19) - (unsigned char) *(s2 + 19));
-	if (*(s1 + 20) != *(s2 + 20)) return ((unsigned char) *(s1 + 20) - (unsigned char) *(s2 + 20));
-	if (*(s1 + 21) != *(s2 + 21)) return ((unsigned char) *(s1 + 21) - (unsigned char) *(s2 + 21));
-	if (*(s1 + 22) != *(s2 + 22)) return ((unsigned char) *(s1 + 22) - (unsigned char) *(s2 + 22));
-	if (*(s1 + 23) != *(s2 + 23)) return ((unsigned char) *(s1 + 23) - (unsigned char) *(s2 + 23));
-	if (*(s1 + 24) != *(s2 + 24)) return ((unsigned char) *(s1 + 24) - (unsigned char) *(s2 + 24));
-	if (*(s1 + 25) != *(s2 + 25)) return ((unsigned char) *(s1 + 25) - (unsigned char) *(s2 + 25));
-	if (*(s1 + 26) != *(s2 + 26)) return ((unsigned char) *(s1 + 26) - (unsigned char) *(s2 + 26));
-	if (*(s1 + 27) != *(s2 + 27)) return ((unsigned char) *(s1 + 27) - (unsigned char) *(s2 + 27));
-	if (*(s1 + 28) != *(s2 + 28)) return ((unsigned char) *(s1 + 28) - (unsigned char) *(s2 + 28));
-	if (*(s1 + 29) != *(s2 + 29)) return ((unsigned char) *(s1 + 29) - (unsigned char) *(s2 + 29));
-	if (*(s1 + 30) != *(s2 + 30)) return ((unsigned char) *(s1 + 30) - (unsigned char) *(s2 + 30));
-	if (*(s1 + 31) != *(s2 + 31)) return ((unsigned char) *(s1 + 31) - (unsigned char) *(s2 + 31));
-	s1 += 32; s2 += 32;
-     }
-
-   s1max = s1 + (n % 32);
-
-   while (s1 < s1max)
-     {
-	cmp = (unsigned char) *s1 - (unsigned char) *s2;
-	if (cmp) return(cmp);
-	s1++;
-	s2++;
-     }
-
-   return(0);
-}
diff --git a/mdk-stage1/slang/slmemcpy.c b/mdk-stage1/slang/slmemcpy.c
deleted file mode 100644
index e8665e4c6..000000000
--- a/mdk-stage1/slang/slmemcpy.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines.  When available, I
-   use system rouines.  For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-char *SLmemcpy(char *s1, char *s2, int n)
-{
-#if defined(__BORLANDC__) && defined(__MSDOS__)
-   asm mov ax, ds
-   asm mov bx, si
-   asm mov dx, di
-   asm mov cx, n
-   asm les di, s1
-   asm lds si, s2
-   asm cld
-   asm rep movsb
-   asm mov ds, ax
-   asm mov si, bx
-   asm mov di, dx
-   return(s1);
-
-#else
-   register char *smax, *s = s1;
-   int n2;
-
-   n2 = n % 4;
-   smax = s + (n - 4);
-   while (s <= smax)
-     {
-	*s = *s2; *(s + 1) = *(s2 + 1); *(s + 2) = *(s2 + 2); *(s + 3) = *(s2 + 3);
-	s += 4;
-	s2 += 4;
-     }
-   while (n2--) *s++ = *s2++;
-   return(s1);
-#endif
-}
diff --git a/mdk-stage1/slang/slmemset.c b/mdk-stage1/slang/slmemset.c
deleted file mode 100644
index 3851663c5..000000000
--- a/mdk-stage1/slang/slmemset.c
+++ /dev/null
@@ -1,39 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are fast memcpy, memset routines.  When available, I
-   use system rouines.  For msdos, I use inline assembly. */
-
-/* The current versions only work in the forward direction only!! */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-void SLmemset(char *p, char space, int n)
-{
-#if defined(__BORLANDC__) && defined(__MSDOS__)
-   asm mov al, space
-   asm mov dx, di
-   asm mov cx, n
-   asm les di, p
-   asm cld
-   asm rep stosb
-   asm mov di, dx
-#else
-   register char *pmax;
-
-   pmax = p + (n - 4);
-   n = n % 4;
-   while (p <= pmax)
-     {
-	*p++ = space; *p++ = space; *p++ = space; *p++= space;
-     }
-   while (n--) *p++ = space;
-#endif
-}
diff --git a/mdk-stage1/slang/slmisc.c b/mdk-stage1/slang/slmisc.c
deleted file mode 100644
index ccc7a9bdf..000000000
--- a/mdk-stage1/slang/slmisc.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define DEBUG_MALLOC 0
-
-#if DEBUG_MALLOC
-# define SLREALLOC_FUN	SLdebug_realloc
-# define SLMALLOC_FUN	SLdebug_malloc
-# define SLFREE_FUN	SLdebug_free
-#else
-# define SLREALLOC_FUN	SLREALLOC
-# define SLMALLOC_FUN	SLMALLOC
-# define SLFREE_FUN	SLFREE
-#endif
-
-/* Version information goes here since this file is always needed. */
-int SLang_Version = SLANG_VERSION;
-char *SLang_Version_String = SLANG_VERSION_STRING;
-
-char *SLmake_string(char *str)
-{
-   return SLmake_nstring(str, strlen (str));
-}
-
-char *SLmake_nstring (char *str, unsigned int n)
-{
-   char *ptr;
-
-   if (NULL == (ptr = SLmalloc(n + 1)))
-     {
-	return NULL;
-     }
-   SLMEMCPY (ptr, str, n);
-   ptr[n] = 0;
-   return(ptr);
-}
-
-void SLmake_lut (unsigned char *lut, unsigned char *range, unsigned char reverse)
-{
-   register unsigned char *l = lut, *lmax = lut + 256;
-   int i, r1, r2;
-
-   while (l < lmax) *l++ = reverse;
-   reverse = !reverse;
-
-   r1 = *range++;
-   while (r1)
-     {
-	r2 = *range++;
-	if ((r2 == '-') && (*range != 0))
-	  {
-	     r2 = *range++;
-	     for (i = r1; i <= r2; i++) lut[i] = reverse;
-	     r1 = *range++;
-	     continue;
-	  }
-	lut[r1] = reverse;
-	r1 = r2;
-     }
-}
-
-char *SLmalloc (unsigned int len)
-{
-   char *p;
-
-   p = (char *) SLMALLOC_FUN (len);
-   if (p == NULL)
-     SLang_Error = SL_MALLOC_ERROR;
-
-   return p;
-}
-
-void SLfree (char *p)
-{
-   if (p != NULL) SLFREE_FUN (p);
-}
-
-char *SLrealloc (char *p, unsigned int len)
-{
-   if (len == 0)
-     {
-	SLfree (p);
-	return NULL;
-     }
-
-   if (p == NULL) p = SLmalloc (len);
-   else
-     {
-	p = (char *)SLREALLOC_FUN (p, len);
-	if (p == NULL)
-	  SLang_Error = SL_MALLOC_ERROR;
-     }
-   return p;
-}
-
-char *SLcalloc (unsigned int nelems, unsigned int len)
-{
-   char *p;
-
-   len = nelems * len;
-   p = SLmalloc (len);
-   if (p != NULL) SLMEMSET (p, 0, len);
-   return p;
-}
-
-/* p and ch may point to the same buffer */
-char *_SLexpand_escaped_char(char *p, char *ch)
-{
-   int i = 0;
-   int max = 0, num, base = 0;
-   char ch1;
-
-   ch1 = *p++;
-
-   switch (ch1)
-     {
-      default: num = ch1; break;
-      case 'n': num = '\n'; break;
-      case 't': num = '\t'; break;
-      case 'v': num = '\v'; break;
-      case 'b': num = '\b'; break;
-      case 'r': num = '\r'; break;
-      case 'f': num = '\f'; break;
-      case 'E': case 'e': num = 27; break;
-      case 'a': num = 7;
-	break;
-
-	/* octal */
-      case '0': case '1': case '2': case '3':
-      case '4': case '5': case '6': case '7':
-	max = '7';
-	base = 8; i = 2; num = ch1 - '0';
-	break;
-
-      case 'd':			       /* decimal -- S-Lang extension */
-	base = 10;
-	i = 3;
-	max = '9';
-	num = 0;
-	break;
-
-      case 'x':			       /* hex */
-	base = 16;
-	max = '9';
-	i = 2;
-	num = 0;
-	break;
-     }
-
-   while (i--)
-     {
-	ch1 = *p;
-
-	if ((ch1 <= max) && (ch1 >= '0'))
-	  {
-	     num = base * num + (ch1 - '0');
-	  }
-	else if (base == 16)
-	  {
-	     ch1 |= 0x20;
-	     if ((ch1 < 'a') || ((ch1 > 'f'))) break;
-	     num = base * num + 10 + (ch1 - 'a');
-	  }
-	else break;
-	p++;
-     }
-
-   *ch = (char) num;
-   return p;
-}
-
-/* s and t could represent the same space */
-void SLexpand_escaped_string (register char *s, register char *t,
-			      register char *tmax)
-{
-   char ch;
-
-   while (t < tmax)
-     {
-	ch = *t++;
-	if (ch == '\\')
-	  {
-	     t = _SLexpand_escaped_char (t, &ch);
-	  }
-	*s++ = ch;
-     }
-   *s = 0;
-}
-
-int SLextract_list_element (char *list, unsigned int nth, char delim,
-			    char *elem, unsigned int buflen)
-{
-   char *el, *elmax;
-   char ch;
-
-   while (nth > 0)
-     {
-	while ((0 != (ch = *list)) && (ch != delim))
-	  list++;
-
-	if (ch == 0) return -1;
-
-	list++;
-	nth--;
-     }
-
-   el = elem;
-   elmax = el + (buflen - 1);
-
-   while ((0 != (ch = *list)) && (ch != delim) && (el < elmax))
-     *el++ = *list++;
-   *el = 0;
-
-   return 0;
-}
-
-#ifndef HAVE_VSNPRINTF
-int _SLvsnprintf (char *buf, unsigned int buflen, char *fmt, va_list ap)
-{
-#if 1
-   unsigned int len;
-
-   /* On some systems vsprintf returns useless information.  So, punt */
-   vsprintf (buf, fmt, ap);
-   len = strlen (buf);
-   if (len >= buflen)
-     {
-	SLang_exit_error ("\
-Your system lacks the vsnprintf system call and vsprintf overflowed a buffer.\n\
-The integrity of this program has been violated.\n");
-	return EOF;		       /* NOT reached */
-     }
-   return (int)len;
-#else
-   int status;
-
-   status = vsprintf (buf, fmt, ap);
-   if (status >= (int) buflen)
-     {
-	/* If we are lucky, we will get this far.  The real solution is to
-	 * provide a working version of vsnprintf
-	 */
-	SLang_exit_error ("\
-Your system lacks the vsnprintf system call and vsprintf overflowed a buffer.\n\
-The integrity of this program has been violated.\n");
-	return EOF;		       /* NOT reached */
-     }
-   return status;
-#endif
-}
-#endif
-
-#ifndef HAVE_SNPRINTF
-int _SLsnprintf (char *buf, unsigned int buflen, char *fmt, ...)
-{
-   int status;
-
-   va_list ap;
-
-   va_start (ap, fmt);
-   status = _SLvsnprintf (buf, buflen, fmt, ap);
-   va_end (ap);
-
-   return status;
-}
-#endif
-
-typedef struct _Cleanup_Function_Type
-{
-   struct _Cleanup_Function_Type *next;
-   void (*f)(void);
-}
-Cleanup_Function_Type;
-
-static Cleanup_Function_Type *Cleanup_Function_List;
-
-static void cleanup_slang (void)
-{
-   while (Cleanup_Function_List != NULL)
-     {
-	Cleanup_Function_Type *next = Cleanup_Function_List->next;
-	(*Cleanup_Function_List->f)();
-	SLFREE_FUN ((char *) Cleanup_Function_List);
-	Cleanup_Function_List = next;
-     }
-}
-
-#ifndef HAVE_ATEXIT
-# ifdef HAVE_ON_EXIT
-static void on_exit_cleanup_slang (int arg_unused)
-{
-   (void) arg_unused;
-   cleanup_slang ();
-}
-# endif
-#endif
-
-int SLang_add_cleanup_function (void (*f)(void))
-{
-   Cleanup_Function_Type *l;
-
-   l = (Cleanup_Function_Type *) SLMALLOC_FUN (sizeof (Cleanup_Function_Type));
-   if (l == NULL)
-     return -1;
-
-   l->f = f;
-   l->next = Cleanup_Function_List;
-
-   if (Cleanup_Function_List == NULL)
-     {
-#ifdef HAVE_ATEXIT
-	(void) atexit (cleanup_slang);
-#else
-# ifdef HAVE_ON_EXIT
-	(void) on_exit (on_exit_cleanup_slang, 0);
-# endif
-#endif
-     }
-   Cleanup_Function_List = l;
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slnspace.c b/mdk-stage1/slang/slnspace.c
deleted file mode 100644
index 174ba7c81..000000000
--- a/mdk-stage1/slang/slnspace.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* slnspace.c  --- Name Space implementation */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLang_NameSpace_Type *Namespace_Tables;
-
-static SLang_NameSpace_Type *find_name_table (char *name)
-{
-   SLang_NameSpace_Type *table_list;
-
-   table_list = Namespace_Tables;
-   while (table_list != NULL)
-     {
-	if (0 == strcmp (table_list->name, name))
-	  break;
-	table_list = table_list->next;
-     }
-   return table_list;
-}
-
-SLang_NameSpace_Type *_SLns_find_namespace (char *name)
-{
-   SLang_NameSpace_Type *table_list;
-
-   table_list = Namespace_Tables;
-   while (table_list != NULL)
-     {
-	if ((table_list->namespace_name != NULL)
-	    && (0 == strcmp (table_list->namespace_name, name)))
-	  break;
-	table_list = table_list->next;
-     }
-   return table_list;
-}
-
-SLang_NameSpace_Type *_SLns_allocate_namespace (char *name, unsigned int size)
-{
-   SLang_NameSpace_Type *table_list;
-   SLang_Name_Type **nt;
-   
-   if (NULL != (table_list = find_name_table (name)))
-     return table_list;
-
-   if (NULL == (name = SLang_create_slstring (name)))
-     return NULL;
-
-   if (NULL == (table_list = (SLang_NameSpace_Type *)
-		SLmalloc (sizeof (SLang_NameSpace_Type))))
-     {
-	SLang_free_slstring (name);
-	return NULL;
-     }
-   
-   if (NULL == (nt = (SLang_Name_Type **) SLmalloc (sizeof (SLang_Name_Type *) * size)))
-     {
-	SLang_free_slstring (name);
-	SLfree ((char *)table_list);
-	return NULL;
-     }
-
-   memset ((char *)nt, 0, size * sizeof (SLang_Name_Type *));
-   memset ((char *) table_list, 0, sizeof (SLang_NameSpace_Type));
-
-   table_list->name = name;
-   table_list->table = nt;
-   table_list->table_size = size;
-
-   table_list->next = Namespace_Tables;
-   Namespace_Tables = table_list;
-
-   return table_list;
-}
-
-int _SLns_set_namespace_name (SLang_NameSpace_Type *t, char *name)
-{
-   SLang_NameSpace_Type *t1;
-   
-   t1 = _SLns_find_namespace (name);
-   if (t1 == NULL)
-     t1 = t;
-   
-   if ((t != t1) || (*name == 0))
-     {
-	SLang_verror (SL_INTRINSIC_ERROR, "Namespace \"%s\" already exists",
-		      name);
-	return -1;
-     }
-
-   if (NULL == (name = SLang_create_slstring (name)))
-     return -1;
-
-   SLang_free_slstring (t->namespace_name);   /* NULL ok */
-   t->namespace_name = name;
-   
-   return 0;
-}
-
-SLang_Array_Type *_SLnspace_apropos (SLang_NameSpace_Type *ns, char *pat, unsigned int what)
-{
-   SLang_Array_Type *at;
-   unsigned int table_size;
-   SLang_Name_Type *t, **table;
-   int num_matches;
-   unsigned int i;
-   SLRegexp_Type rexp;
-   unsigned char rbuf[512];
-   unsigned int two;
-   
-   at = NULL;
-
-   if ((ns == NULL)
-       || ((table = ns->table) == NULL))
-     return NULL;
-
-   memset ((char *) &rexp, 0, sizeof (SLRegexp_Type));
-   rexp.case_sensitive = 1;
-   rexp.buf = rbuf;
-   rexp.buf_len = sizeof (rbuf);
-   rexp.pat = (unsigned char *)pat;
-
-   if (0 != SLang_regexp_compile (&rexp))
-     {
-	SLang_verror (SL_INVALID_PARM, "Invalid regular expression: %s", pat);
-	return NULL;
-     }
-   
-   table_size = ns->table_size;
-
-   two = 2;
-   while (two != 0)
-     {
-	two--;
-	
-	num_matches = 0;
-	for (i = 0; i < table_size; i++)
-	  {
-	     t = table[i];
-	     while (t != NULL)
-	       {
-		  unsigned int flags;
-		  char *name = t->name;
-
-		  switch (t->name_type)
-		    {
-		     case SLANG_GVARIABLE:
-		       flags = 8;
-		       break;
-		       
-		     case SLANG_ICONSTANT:
-		     case SLANG_DCONSTANT:
-		     case SLANG_RVARIABLE:
-		     case SLANG_IVARIABLE:
-		       flags = 4;
-		       break;
-
-		     case SLANG_INTRINSIC:
-		     case SLANG_MATH_UNARY:
-		     case SLANG_APP_UNARY:
-		       flags = 1;
-		       break;
-		       
-		     case SLANG_FUNCTION:
-		       flags = 2;
-		       break;
-		       
-		     default:
-		       flags = 0;
-		       break;
-		    }
-		  
-		  if ((flags & what)
-		      && (NULL != SLang_regexp_match ((unsigned char *)name, strlen (name), &rexp)))
-		    {
-		       if (at != NULL)
-			 {
-			    if (-1 == SLang_set_array_element (at, &num_matches, (VOID_STAR)&name))
-			      goto return_error;
-			 }
-		       num_matches++;
-		    }
-		  t = t->next;
-	       }
-	  }
-	
-	if (at == NULL)
-	  {
-	     at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &num_matches, 1);
-	     if (at == NULL)
-	       goto return_error;
-	  }
-     }
-   
-   return at;
-   
-   return_error:
-   SLang_free_array (at);
-   return NULL;
-}
-
-SLang_NameSpace_Type *SLns_create_namespace (char *namespace_name)
-{   
-   SLang_NameSpace_Type *ns;
-   static int num;
-   char name[64];
-
-   if (namespace_name == NULL)
-     namespace_name = "Global";
-
-   ns = _SLns_find_namespace (namespace_name);
-   if (ns != NULL)
-     return ns;
-   
-   sprintf (name, " *** internal ns <%d> *** ", num);
-
-   if (NULL == (ns = _SLns_allocate_namespace (name, SLSTATIC_HASH_TABLE_SIZE)))
-     return NULL;
-   
-   num++;
-   if (-1 == _SLns_set_namespace_name (ns, namespace_name))
-     {
-	SLns_delete_namespace (ns);
-	return NULL;
-     }
-   
-   return ns;
-}
-
-void SLns_delete_namespace (SLang_NameSpace_Type *ns)
-{
-   (void) ns;
-   /* V2.0 */
-}
diff --git a/mdk-stage1/slang/slospath.c b/mdk-stage1/slang/slospath.c
deleted file mode 100644
index 644931e81..000000000
--- a/mdk-stage1/slang/slospath.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* Pathname intrinsic functions */
-/* Copyright (c) 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static void path_concat (char *a, char *b)
-{
-   SLang_push_malloced_string (SLpath_dircat (a,b));
-}
-
-static void path_extname (char *path)
-{
-#ifdef VMS
-   char *p;
-#endif
-
-   path = SLpath_extname (path);
-#ifndef VMS
-   SLang_push_string (path);
-#else
-   p = strchr (path, ';');
-   if (p == NULL)
-     (void)SLang_push_string (p);
-   else
-     (void)SLang_push_malloced_string (SLmake_nstring (path, (unsigned int)(p - path)));
-#endif
-}
-
-static void path_basename (char *path)
-{
-   (void) SLang_push_string (SLpath_basename (path));
-}
-
-static void path_dirname (char *path)
-{
-   (void) SLang_push_malloced_string (SLpath_dirname (path));
-}
-
-static void path_sans_extname (char *path)
-{
-   (void) SLang_push_malloced_string (SLpath_pathname_sans_extname (path));
-}
-
-
-
-static SLang_Intrin_Fun_Type Path_Name_Table [] =
-{
-   MAKE_INTRINSIC_SS("path_concat", path_concat, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_extname", path_extname, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_dirname", path_dirname, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_basename", path_basename, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_sans_extname", path_sans_extname, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("path_is_absolute", SLpath_is_absolute_path, SLANG_INT_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_ospath (void)
-{
-   if (-1 == SLadd_intrin_fun_table(Path_Name_Table, "__OSPATH__"))
-     return -1;
-   
-   return 0;
-}
-
-
diff --git a/mdk-stage1/slang/slpack.c b/mdk-stage1/slang/slpack.c
deleted file mode 100644
index 53ef63643..000000000
--- a/mdk-stage1/slang/slpack.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/* Pack objects as a binary string */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <ctype.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifndef isdigit
-# define isdigit(c) (((c)>='0')&&((c)<= '9'))
-#endif
-#ifndef isspace
-# define isspace(c) (((c)==' ') || ((c)=='\t') || ((c)=='\n'))
-#endif
-
-/* format description:
- *
- *    s = string (null padded)
- *    S = string (space padded)
- *    c = signed char
- *    C = unsigned char
- *    h = short
- *    H = unsigned short
- *    i = int
- *    I = unsigned int
- *    l = long
- *    L = unsigned long
- *    j = 16 bit signed integer (short)
- *    J = 16 bit unsigned integer (short)
- *    k = 32 bit signed integer (long)
- *    K = 32 bit unsigned integer (long)
- *    f = float (native format)
- *    F = 32 bit double
- *    d = double (native format)
- *    D = 64 bit double
- *    x = null pad byte
- *    > = big-endian mode
- *    < = little-endian mode
- *    = = native mode
- */
-
-#define NATIVE_ORDER		0
-#define BIGENDIAN_ORDER		1
-#define LILENDIAN_ORDER		2
-static int Native_Byte_Order = NATIVE_ORDER;
-
-typedef struct
-{
-   char format_type;
-   unsigned char data_type;
-   unsigned int repeat;
-   unsigned int sizeof_type;
-   char pad;
-   int byteorder;
-   int is_scalar;
-}
-Format_Type;
-
-static int get_int_type_for_size (unsigned int size, unsigned char *s, unsigned char *u)
-{
-   if (sizeof (int) == size)
-     {
-	if (s != NULL) *s = SLANG_INT_TYPE;
-	if (u != NULL) *u = SLANG_UINT_TYPE;
-	return 0;
-     }
-
-   if (sizeof (short) == size)
-     {
-	if (s != NULL) *s = SLANG_SHORT_TYPE;
-	if (u != NULL) *u = SLANG_USHORT_TYPE;
-	return 1;
-     }
-
-   if (sizeof (long) == size)
-     {
-	if (s != NULL) *s = SLANG_LONG_TYPE;
-	if (u != NULL) *u = SLANG_ULONG_TYPE;
-	return 1;
-     }
-
-   if (s != NULL) *s = 0;
-   if (u != NULL) *u = 0;
-   SLang_verror (SL_NOT_IMPLEMENTED,
-		 "This OS does not support a %u byte int", size);
-   return -1;
-}
-
-static int get_float_type_for_size (unsigned int size, unsigned char *s)
-{
-   if (sizeof (float) == size)
-     {
-	*s = SLANG_FLOAT_TYPE;
-	return 0;
-     }
-
-   if (sizeof (double) == size)
-     {
-	*s = SLANG_DOUBLE_TYPE;
-	return 0;
-     }
-
-   SLang_verror (SL_NOT_IMPLEMENTED,
-		 "This OS does not support a %u byte float", size);
-   return -1;
-}
-
-static int parse_a_format (char **format, Format_Type *ft)
-{
-   char *f;
-   char ch;
-   unsigned repeat;
-
-   f = *format;
-
-   while (((ch = *f++) != 0)
-	  && isspace (ch))
-     ;
-
-   switch (ch)
-     {
-      default:
-	ft->byteorder = NATIVE_ORDER;
-	break;
-
-      case '=':
-	ft->byteorder = NATIVE_ORDER;
-	ch = *f++;
-	break;
-
-      case '>':
-	ft->byteorder = BIGENDIAN_ORDER;
-	ch = *f++;
-	break;
-
-      case '<':
-	ft->byteorder = LILENDIAN_ORDER;
-	ch = *f++;
-	break;
-     }
-
-   if (ch == 0)
-     {
-	f--;
-	*format = f;
-	return 0;
-     }
-
-   ft->format_type = ch;
-   ft->repeat = 1;
-
-   if (isdigit (*f))
-     {
-	repeat = (unsigned int) (*f - '0');
-	f++;
-
-	while (isdigit (*f))
-	  {
-	     unsigned int repeat10 = 10 * repeat + (unsigned int)(*f - '0');
-
-	     /* Check overflow */
-	     if (repeat != repeat10 / 10)
-	       {
-		  SLang_verror (SL_OVERFLOW,
-				"Repeat count too large in [un]pack format");
-		  return -1;
-	       }
-	     repeat = repeat10;
-	     f++;
-	  }
-	ft->repeat = repeat;
-     }
-
-   *format = f;
-
-   ft->is_scalar = 1;
-   ft->pad = 0;
-
-   switch (ft->format_type)
-     {
-      default:
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "[un]pack format character '%c' not supported", ft->format_type);
-	return -1;
-
-      case 'D':
-	ft->sizeof_type = 8;
-	if (-1 == get_float_type_for_size (8, &ft->data_type))
-	  return -1;
-	break;
-
-      case 'd':
-	ft->data_type = SLANG_DOUBLE_TYPE;
-	ft->sizeof_type = sizeof (double);
-	break;
-
-      case 'F':
-	ft->sizeof_type = 4;
-	if (-1 == get_float_type_for_size (4, &ft->data_type))
-	  return -1;
-	break;
-      case 'f':
-	ft->data_type = SLANG_FLOAT_TYPE;
-	ft->sizeof_type = sizeof (float);
-	break;
-
-      case 'h':
-	ft->data_type = SLANG_SHORT_TYPE;
-	ft->sizeof_type = sizeof (short);
-	break;
-      case 'H':
-	ft->data_type = SLANG_USHORT_TYPE;
-	ft->sizeof_type = sizeof (unsigned short);
-	break;
-      case 'i':
-	ft->data_type = SLANG_INT_TYPE;
-	ft->sizeof_type = sizeof (int);
-	break;
-      case 'I':
-	ft->data_type = SLANG_UINT_TYPE;
-	ft->sizeof_type = sizeof (unsigned int);
-	break;
-      case 'l':
-	ft->data_type = SLANG_LONG_TYPE;
-	ft->sizeof_type = sizeof (long);
-	break;
-      case 'L':
-	ft->data_type = SLANG_ULONG_TYPE;
-	ft->sizeof_type = sizeof (unsigned long);
-	break;
-
-	/* 16 bit ints */
-      case 'j':
-	ft->sizeof_type = 2;
-	if (-1 == get_int_type_for_size (2, &ft->data_type, NULL))
-	  return -1;
-	break;
-      case 'J':
-	ft->sizeof_type = 2;
-	if (-1 == get_int_type_for_size (2, NULL, &ft->data_type))
-	  return -1;
-	break;
-
-	/* 32 bit ints */
-      case 'k':
-	ft->sizeof_type = 4;
-	if (-1 == get_int_type_for_size (4, &ft->data_type, NULL))
-	  return -1;
-	break;
-      case 'K':
-	ft->sizeof_type = 4;
-	if (-1 == get_int_type_for_size (4, NULL, &ft->data_type))
-	  return -1;
-	break;
-
-      case 'x':
-	ft->sizeof_type = 1;
-	ft->data_type = 0;
-	break;
-
-      case 'c':
-	ft->sizeof_type = 1;
-	ft->data_type = SLANG_CHAR_TYPE;
-	break;
-
-      case 'C':
-	ft->data_type = SLANG_UCHAR_TYPE;
-	ft->sizeof_type = 1;
-	break;
-
-      case 'S':
-      case 'A':
-	ft->pad = ' ';
-      case 'a':
-      case 's':
-	ft->data_type = SLANG_BSTRING_TYPE;
-	ft->sizeof_type = 1;
-	ft->is_scalar = 0;
-	break;
-     }
-   return 1;
-}
-
-static int compute_size_for_format (char *format, unsigned int *num_bytes)
-{
-   unsigned int size;
-   Format_Type ft;
-   int status;
-
-   *num_bytes = size = 0;
-
-   while (1 == (status = parse_a_format (&format, &ft)))
-     size += ft.repeat * ft.sizeof_type;
-
-   *num_bytes = size;
-   return status;
-}
-
-static void byte_swap64 (unsigned char *ss, unsigned int n) /*{{{*/
-{
-   unsigned char *p, *pmax, ch;
-
-   if (n == 0) return;
-   p = (unsigned char *) ss;
-   pmax = p + 8 * n;
-   while (p < pmax)
-     {
-	ch = *p;
-	*p = *(p + 7);
-	*(p + 7) = ch;
-
-	ch = *(p + 6);
-	*(p + 6) = *(p + 1);
-	*(p + 1) = ch;
-
-	ch = *(p + 5);
-	*(p + 5) = *(p + 2);
-	*(p + 2) = ch;
-
-	ch = *(p + 4);
-	*(p + 4) = *(p + 3);
-	*(p + 3) = ch;
-
-	p += 8;
-     }
-}
-
-/*}}}*/
-static void byte_swap32 (unsigned char *ss, unsigned int n) /*{{{*/
-{
-   unsigned char *p, *pmax, ch;
-
-   p = (unsigned char *) ss;
-   pmax = p + 4 * n;
-   while (p < pmax)
-     {
-	ch = *p;
-	*p = *(p + 3);
-	*(p + 3) = ch;
-
-	ch = *(p + 1);
-	*(p + 1) = *(p + 2);
-	*(p + 2) = ch;
-	p += 4;
-     }
-}
-
-/*}}}*/
-static void byte_swap16 (unsigned char *p, unsigned int nread) /*{{{*/
-{
-   unsigned char *pmax, ch;
-
-   pmax = p + 2 * nread;
-   while (p < pmax)
-     {
-	ch = *p;
-	*p = *(p + 1);
-	*(p + 1) = ch;
-	p += 2;
-     }
-}
-
-/*}}}*/
-
-static int byteswap (int order, unsigned char *b,  unsigned int size, unsigned int num)
-{
-   if (Native_Byte_Order == order)
-     return 0;
-
-   switch (size)
-     {
-      case 2:
-	byte_swap16 (b, num);
-	break;
-      case 4:
-	byte_swap32 (b, num);
-	break;
-      case 8:
-	byte_swap64 (b, num);
-	break;
-      default:
-	return -1;
-     }
-
-   return 0;
-}
-
-static void check_native_byte_order (void)
-{
-   unsigned short x;
-
-   if (Native_Byte_Order != NATIVE_ORDER)
-     return;
-
-   x = 0xFF;
-   if (*(unsigned char *)&x == 0xFF)
-     Native_Byte_Order = LILENDIAN_ORDER;
-   else
-     Native_Byte_Order = BIGENDIAN_ORDER;
-}
-
-static SLang_BString_Type *
-pack_according_to_format (char *format, unsigned int nitems)
-{
-   unsigned int size, num;
-   unsigned char *buf, *b;
-   SLang_BString_Type *bs;
-   Format_Type ft;
-
-   buf = NULL;
-
-   if (-1 == compute_size_for_format (format, &size))
-     goto return_error;
-
-   if (NULL == (buf = (unsigned char *) SLmalloc (size + 1)))
-     goto return_error;
-
-   b = buf;
-
-   while (1 == parse_a_format (&format, &ft))
-     {
-	unsigned char *ptr;
-	unsigned int repeat;
-
-	repeat = ft.repeat;
-	if (ft.data_type == 0)
-	  {
-	     memset ((char *) b, ft.pad, repeat);
-	     b += repeat;
-	     continue;
-	  }
-
-	if (ft.is_scalar)
-	  {
-	     unsigned char *bstart;
-	     num = repeat;
-
-	     bstart = b;
-	     while (repeat != 0)
-	       {
-		  unsigned int nelements;
-		  SLang_Array_Type *at;
-
-		  if (nitems == 0)
-		    {
-		       SLang_verror (SL_INVALID_PARM,
-				     "Not enough items for pack format");
-		       goto return_error;
-		    }
-
-		  if (-1 == SLang_pop_array_of_type (&at, ft.data_type))
-		    goto return_error;
-
-		  nelements = at->num_elements;
-		  if (repeat < nelements)
-		    nelements = repeat;
-		  repeat -= nelements;
-
-		  nelements = nelements * ft.sizeof_type;
-		  memcpy ((char *)b, (char *)at->data, nelements);
-
-		  b += nelements;
-		  SLang_free_array (at);
-		  nitems--;
-	       }
-
-	     if (ft.byteorder != NATIVE_ORDER)
-	       byteswap (ft.byteorder, bstart, ft.sizeof_type, num);
-
-	     continue;
-	  }
-
-	/* Otherwise we have a string */
-	if (-1 == SLang_pop_bstring (&bs))
-	  goto return_error;
-
-	ptr = SLbstring_get_pointer (bs, &num);
-	if (repeat < num) num = repeat;
-	memcpy ((char *)b, (char *)ptr, num);
-	b += num;
-	repeat -= num;
-	memset ((char *)b, ft.pad, repeat);
-	SLbstring_free (bs);
-	b += repeat;
-	nitems--;
-     }
-
-   *b = 0;
-   bs = SLbstring_create_malloced (buf, size, 0);
-   if (bs == NULL)
-     goto return_error;
-
-   SLdo_pop_n (nitems);
-   return bs;
-
-   return_error:
-   SLdo_pop_n (nitems);
-   if (buf != NULL)
-     SLfree ((char *) buf);
-
-   return NULL;
-}
-
-void _SLpack (void)
-{
-   SLang_BString_Type *bs;
-   char *fmt;
-   int nitems;
-
-   check_native_byte_order ();
-
-   nitems = SLang_Num_Function_Args;
-   if (nitems <= 0)
-     {
-	SLang_verror (SL_SYNTAX_ERROR,
-		      "pack: not enough arguments");
-	return;
-     }
-
-   if ((-1 == SLreverse_stack (nitems))
-       || (-1 == SLang_pop_slstring (&fmt)))
-     bs = NULL;
-   else
-     {
-	bs = pack_according_to_format (fmt, (unsigned int)nitems - 1);
-	SLang_free_slstring (fmt);
-     }
-
-   SLang_push_bstring (bs);
-   SLbstring_free (bs);
-}
-
-void _SLunpack (char *format, SLang_BString_Type *bs)
-{
-   Format_Type ft;
-   unsigned char *b;
-   unsigned int len;
-   unsigned int num_bytes;
-
-   check_native_byte_order ();
-
-   if (-1 == compute_size_for_format (format, &num_bytes))
-     return;
-
-   b = SLbstring_get_pointer (bs, &len);
-   if (b == NULL)
-     return;
-
-   if (len < num_bytes)
-     {
-	SLang_verror (SL_INVALID_PARM,
-		      "unpack format %s is too large for input string",
-		      format);
-	return;
-     }
-
-   while (1 == parse_a_format (&format, &ft))
-     {
-	char *str, *s;
-
-	if (ft.repeat == 0)
-	  continue;
-
-	if (ft.data_type == 0)
-	  {			       /* skip padding */
-	     b += ft.repeat;
-	     continue;
-	  }
-
-	if (ft.is_scalar)
-	  {
-	     SLang_Array_Type *at;
-	     int dims;
-
-	     if (ft.repeat == 1)
-	       {
-		  SLang_Class_Type *cl;
-
-		  cl = _SLclass_get_class (ft.data_type);
-		  memcpy ((char *)cl->cl_transfer_buf, (char *)b, ft.sizeof_type);
-		  if (ft.byteorder != NATIVE_ORDER)
-		    byteswap (ft.byteorder, (unsigned char *)cl->cl_transfer_buf, ft.sizeof_type, 1);
-
-		  if (-1 == (cl->cl_apush (ft.data_type, cl->cl_transfer_buf)))
-		    return;
-		  b += ft.sizeof_type;
-		  continue;
-	       }
-
-	     dims = (int) ft.repeat;
-	     at = SLang_create_array (ft.data_type, 0, NULL, &dims, 1);
-	     if (at == NULL)
-	       return;
-
-	     num_bytes = ft.repeat * ft.sizeof_type;
-	     memcpy ((char *)at->data, (char *)b, num_bytes);
-	     if (ft.byteorder != NATIVE_ORDER)
-	       byteswap (ft.byteorder, (unsigned char *)at->data, ft.sizeof_type, ft.repeat);
-
-	     if (-1 == SLang_push_array (at, 1))
-	       return;
-
-	     b += num_bytes;
-	     continue;
-	  }
-
-	len = ft.repeat;
-	str = SLmalloc (len + 1);
-	if (str == NULL)
-	  return;
-
-	memcpy ((char *) str, (char *)b, len);
-	str [len] = 0;
-
-	if (ft.pad == ' ')
-	  {
-	     unsigned int new_len;
-
-	     s = str + len;
-	     while (s > str)
-	       {
-		  s--;
-		  if ((*s != ' ') && (*s != 0))
-		    {
-		       s++;
-		       break;
-		    }
-		  *s = 0;
-	       }
-	     new_len = (unsigned int) (s - str);
-
-	     if (new_len != len)
-	       {
-		  s = SLrealloc (str, new_len + 1);
-		  if (s == NULL)
-		    {
-		       SLfree (str);
-		       return;
-		    }
-		  str = s;
-		  len = new_len;
-	       }
-	  }
-
-	/* Avoid a bstring if possible */
-	s = SLmemchr (str, 0, len);
-	if (s == NULL)
-	  {
-	     if (-1 == SLang_push_malloced_string (str))
-	       return;
-	  }
-	else
-	  {
-	     SLang_BString_Type *new_bs;
-
-	     new_bs = SLbstring_create_malloced ((unsigned char *)str, len, 1);
-	     if (new_bs == NULL)
-	       return;
-
-	     if (-1 == SLang_push_bstring (new_bs))
-	       {
-		  SLfree (str);
-		  return;
-	       }
-	     SLbstring_free (new_bs);
-	  }
-
-	b += ft.repeat;
-     }
-}
-
-unsigned int _SLpack_compute_size (char *format)
-{
-   unsigned int n;
-
-   n = 0;
-   (void) compute_size_for_format (format, &n);
-   return n;
-}
-
-void _SLpack_pad_format (char *format)
-{
-   unsigned int len, max_len;
-   Format_Type ft;
-   char *buf, *b;
-
-   check_native_byte_order ();
-
-   /* Just check the syntax */
-   if (-1 == compute_size_for_format (format, &max_len))
-     return;
-
-   /* This should be sufficient to handle any needed xyy padding characters.
-    * I cannot see how this will be overrun
-    */
-   max_len = 4 * (strlen (format) + 1);
-   if (NULL == (buf = SLmalloc (max_len + 1)))
-     return;
-
-   b = buf;
-   len = 0;
-   while (1 == parse_a_format (&format, &ft))
-     {
-	struct { char a; short b; } s_h;
-	struct { char a; int b; } s_i;
-	struct { char a; long b; } s_l;
-	struct { char a; float b; } s_f;
-	struct { char a; double b; } s_d;
-	unsigned int pad;
-
-	if (ft.repeat == 0)
-	  continue;
-
-	if (ft.data_type == 0)
-	  {			       /* pad */
-	     sprintf (b, "x%u", ft.repeat);
-	     b += strlen (b);
-	     len += ft.repeat;
-	     continue;
-	  }
-
-	switch (ft.data_type)
-	  {
-	   default:
-	   case SLANG_STRING_TYPE:
-	   case SLANG_BSTRING_TYPE:
-	   case SLANG_CHAR_TYPE:
-	   case SLANG_UCHAR_TYPE:
-	     pad = 0;
-	     break;
-
-	   case SLANG_SHORT_TYPE:
-	   case SLANG_USHORT_TYPE:
-	     pad = ((unsigned int) ((char *)&s_h.b - (char *)&s_h.a));
-	     break;
-
-	   case SLANG_INT_TYPE:
-	   case SLANG_UINT_TYPE:
-	     pad = ((unsigned int) ((char *)&s_i.b - (char *)&s_i.a));
-	     break;
-
-	   case SLANG_LONG_TYPE:
-	   case SLANG_ULONG_TYPE:
-	     pad = ((unsigned int) ((char *)&s_l.b - (char *)&s_l.a));
-	     break;
-
-	   case SLANG_FLOAT_TYPE:
-	     pad = ((unsigned int) ((char *)&s_f.b - (char *)&s_f.a));
-	     break;
-
-	   case SLANG_DOUBLE_TYPE:
-	     pad = ((unsigned int) ((char *)&s_d.b - (char *)&s_d.a));
-	     break;
-	  }
-
-	/* Pad to a length that is an integer multiple of pad. */
-	if (pad)
-	  pad = pad * ((len + pad - 1)/pad) - len;
-
-	if (pad)
-	  {
-	     sprintf (b, "x%u", pad);
-	     b += strlen (b);
-	     len += pad;
-	  }
-
-	*b++ = ft.format_type;
-	if (ft.repeat > 1)
-	  {
-	     sprintf (b, "%u", ft.repeat);
-	     b += strlen (b);
-	  }
-
-	len += ft.repeat * ft.sizeof_type;
-     }
-   *b = 0;
-
-   (void) SLang_push_malloced_string (buf);
-}
diff --git a/mdk-stage1/slang/slparse.c b/mdk-stage1/slang/slparse.c
deleted file mode 100644
index bc709d1fb..000000000
--- a/mdk-stage1/slang/slparse.c
+++ /dev/null
@@ -1,1970 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static SLang_Load_Type *LLT;
-int _SLang_Compile_Line_Num_Info;
-
-static void free_token (_SLang_Token_Type *t)
-{
-   register unsigned int nrefs = t->num_refs;
-
-   if (nrefs == 0)
-     return;
-
-   if (nrefs == 1)
-     {
-	if (t->free_sval_flag)
-	  {
-	     if (t->type == BSTRING_TOKEN)
-	       SLbstring_free (t->v.b_val);
-	     else
-	       _SLfree_hashed_string (t->v.s_val, strlen (t->v.s_val), t->hash);
-	     t->v.s_val = NULL;
-	  }
-     }
-
-   t->num_refs = nrefs - 1;
-}
-
-static void init_token (_SLang_Token_Type *t)
-{
-   memset ((char *) t, 0, sizeof (_SLang_Token_Type));
-#if _SLANG_HAS_DEBUG_CODE
-   t->line_number = -1;
-#endif
-}
-
-/* Allow room for one push back of a token.  This is necessary for
- * multiple assignment.
- */
-static unsigned int Use_Next_Token;
-static _SLang_Token_Type Next_Token;
-#if _SLANG_HAS_DEBUG_CODE
-static int Last_Line_Number = -1;
-#endif
-
-static int unget_token (_SLang_Token_Type *ctok)
-{
-   if (SLang_Error)
-     return -1;
-   if (Use_Next_Token != 0)
-     {
-	_SLparse_error ("unget_token failed", ctok, 0);
-	return -1;
-     }
-
-   Use_Next_Token++;
-   Next_Token = *ctok;
-   init_token (ctok);
-   return 0;
-}
-
-static int get_token (_SLang_Token_Type *ctok)
-{
-   if (ctok->num_refs)
-     free_token (ctok);
-
-   if (Use_Next_Token)
-     {
-	Use_Next_Token--;
-	*ctok = Next_Token;
-	return ctok->type;
-     }
-
-   return _SLget_token (ctok);
-}
-
-static int compile_token (_SLang_Token_Type *t)
-{
-#if _SLANG_HAS_DEBUG_CODE
-   if (_SLang_Compile_Line_Num_Info
-       && (t->line_number != Last_Line_Number)
-       && (t->line_number != -1))
-     {
-	_SLang_Token_Type tok;
-	tok.type = LINE_NUM_TOKEN;
-	tok.v.long_val = Last_Line_Number = t->line_number;
-	(*_SLcompile_ptr) (&tok);
-     }
-#endif
-   (*_SLcompile_ptr) (t);
-   return 0;
-}
-
-typedef struct
-{
-#define USE_PARANOID_MAGIC	0
-#if USE_PARANOID_MAGIC
-   unsigned long magic;
-#endif
-   _SLang_Token_Type *stack;
-   unsigned int len;
-   unsigned int size;
-}
-Token_List_Type;
-
-#define MAX_TOKEN_LISTS 16
-static Token_List_Type Token_List_Stack [MAX_TOKEN_LISTS];
-static unsigned int Token_List_Stack_Depth = 0;
-static Token_List_Type *Token_List = NULL;
-
-static void init_token_list (Token_List_Type *t)
-{
-   t->size = 0;
-   t->len = 0;
-   t->stack = NULL;
-#if USE_PARANOID_MAGIC
-   t->magic = 0xABCDEF12;
-#endif
-}
-
-static void free_token_list (Token_List_Type *t)
-{
-   _SLang_Token_Type *s;
-
-   if (t == NULL)
-     return;
-#if USE_PARANOID_MAGIC
-   if (t->magic != 0xABCDEF12)
-     {
-	SLang_doerror ("Magic error.");
-	return;
-     }
-#endif
-   s = t->stack;
-   if (s != NULL)
-     {
-	_SLang_Token_Type *smax = s + t->len;
-	while (s != smax)
-	  {
-	     if (s->num_refs) free_token (s);
-	     s++;
-	  }
-
-	SLfree ((char *) t->stack);
-     }
-
-   memset ((char *) t, 0, sizeof (Token_List_Type));
-}
-
-static Token_List_Type *push_token_list (void)
-{
-   if (Token_List_Stack_Depth == MAX_TOKEN_LISTS)
-     {
-	_SLparse_error ("Token list stack size exceeded", NULL, 0);
-	return NULL;
-     }
-
-   Token_List = Token_List_Stack + Token_List_Stack_Depth;
-   Token_List_Stack_Depth++;
-   init_token_list (Token_List);
-   return Token_List;
-}
-
-static int pop_token_list (int do_free)
-{
-   if (Token_List_Stack_Depth == 0)
-     {
-	if (SLang_Error == 0)
-	  _SLparse_error ("Token list stack underflow", NULL, 0);
-	return -1;
-     }
-   Token_List_Stack_Depth--;
-
-   if (do_free) free_token_list (Token_List);
-
-   if (Token_List_Stack_Depth != 0)
-     Token_List = Token_List_Stack + (Token_List_Stack_Depth - 1);
-   else
-     Token_List = NULL;
-
-   return 0;
-}
-
-static int check_token_list_space (Token_List_Type *t, unsigned int delta_size)
-{
-   _SLang_Token_Type *st;
-   unsigned int len;
-#if USE_PARANOID_MAGIC
-   if (t->magic != 0xABCDEF12)
-     {
-	SLang_doerror ("Magic error.");
-	return -1;
-     }
-#endif
-   len = t->len + delta_size;
-   if (len <= t->size) return 0;
-
-   if (delta_size < 4)
-     {
-	delta_size = 4;
-	len = t->len + delta_size;
-     }
-
-   st = (_SLang_Token_Type *) SLrealloc((char *) t->stack,
-					len * sizeof(_SLang_Token_Type));
-   if (st == NULL)
-     {
-	_SLparse_error ("Malloc error", NULL, 0);
-	return -1;
-     }
-
-   memset ((char *) (st + t->len), 0, delta_size);
-
-   t->stack = st;
-   t->size = len;
-   return 0;
-}
-
-static int append_token (_SLang_Token_Type *t)
-{
-   if (-1 == check_token_list_space (Token_List, 1))
-     return -1;
-
-   Token_List->stack [Token_List->len] = *t;
-   Token_List->len += 1;
-   t->num_refs = 0;		       /* stealing it */
-   return 0;
-}
-
-static int append_token_of_type (unsigned char t)
-{
-   _SLang_Token_Type *tok;
-
-   if (-1 == check_token_list_space (Token_List, 1))
-     return -1;
-
-   /* The memset when the list was created ensures that the other fields
-    * are properly initialized.
-    */
-   tok = Token_List->stack + Token_List->len;
-   init_token (tok);
-   tok->type = t;
-   Token_List->len += 1;
-   return 0;
-}
-
-static _SLang_Token_Type *get_last_token (void)
-{
-   unsigned int len;
-
-   if ((Token_List == NULL)
-       || (0 == (len = Token_List->len)))
-     return NULL;
-
-   len--;
-   return Token_List->stack + len;
-}
-
-/* This function does NOT free the list. */
-static int compile_token_list_with_fun (int dir, Token_List_Type *list,
-					int (*f)(_SLang_Token_Type *))
-{
-   _SLang_Token_Type *t0, *t1;
-
-   if (list == NULL)
-     return -1;
-
-   if (f == NULL)
-     f = compile_token;
-
-   t0 = list->stack;
-   t1 = t0 + list->len;
-
-   if (dir < 0)
-     {
-	/* backwards */
-
-	while ((SLang_Error == 0) && (t1 > t0))
-	  {
-	     t1--;
-	     (*f) (t1);
-	  }
-	return 0;
-     }
-
-   /* forward */
-   while ((SLang_Error == 0) && (t0 < t1))
-     {
-	(*f) (t0);
-	t0++;
-     }
-   return 0;
-}
-
-static int compile_token_list (void)
-{
-   if (Token_List == NULL)
-     return -1;
-
-   compile_token_list_with_fun (1, Token_List, NULL);
-   pop_token_list (1);
-   return 0;
-}
-
-/* Take all elements in the list from pos2 to the end and exchange them
- * with the elements at pos1, e.g.,
- * ...ABCDEabc ==> ...abcABCDE
- * where pos1 denotes A and pos2 denotes a.
- */
-static int token_list_element_exchange (unsigned int pos1, unsigned int pos2)
-{
-   _SLang_Token_Type *s, *s1, *s2;
-   unsigned int len, nloops;
-
-   if (Token_List == NULL)
-     return -1;
-
-   s = Token_List->stack;
-   len = Token_List->len;
-
-   if ((s == NULL) || (len == 0)
-       || (pos2 >= len))
-     return -1;
-
-   /* This may not be the most efficient algorithm but the number to swap
-    * is most-likely going to be small, e.g, 3
-    * The algorithm is to rotate the list.  The particular rotation
-    * direction was chosen to make insert_token fast.
-    * It works like:
-    * @ ABCabcde --> BCabcdeA --> CabcdeAB -->  abcdefAB
-    * which is optimal for Abcdef sequence produced by function calls.
-    *
-    * Profiling indicates that nloops is almost always 1, whereas the inner
-    * loop can loop many times (e.g., 9 times).
-    */
-
-   s2 = s + (len - 1);
-   s1 = s + pos1;
-   nloops = pos2 - pos1;
-
-   while (nloops)
-     {
-	_SLang_Token_Type save;
-
-	s = s1;
-	save = *s;
-
-	while (s < s2)
-	  {
-	     *s = *(s + 1);
-	     s++;
-	  }
-	*s = save;
-
-	nloops--;
-     }
-   return 0;
-}
-
-#if 0
-static int insert_token (_SLang_Token_Type *t, unsigned int pos)
-{
-   if (-1 == append_token (t))
-     return -1;
-
-   return token_list_element_exchange (pos, Token_List->len - 1);
-}
-#endif
-static void compile_token_of_type (unsigned char t)
-{
-   _SLang_Token_Type tok;
-
-#if _SLANG_HAS_DEBUG_CODE
-   tok.line_number = -1;
-#endif
-   tok.type = t;
-   compile_token(&tok);
-}
-
-static void statement (_SLang_Token_Type *);
-static void compound_statement (_SLang_Token_Type *);
-static void expression_with_parenthesis (_SLang_Token_Type *);
-static void handle_semicolon (_SLang_Token_Type *);
-static void statement_list (_SLang_Token_Type *);
-static void variable_list (_SLang_Token_Type *, unsigned char);
-static void struct_declaration (_SLang_Token_Type *);
-static void define_function_args (_SLang_Token_Type *);
-static void typedef_definition (_SLang_Token_Type *);
-static void function_args_expression (_SLang_Token_Type *, int);
-static void expression (_SLang_Token_Type *);
-static void expression_with_commas (_SLang_Token_Type *, int);
-static void simple_expression (_SLang_Token_Type *);
-static void unary_expression (_SLang_Token_Type *);
-static void postfix_expression (_SLang_Token_Type *);
-static int check_for_lvalue (unsigned char, _SLang_Token_Type *);
-/* static void primary_expression (_SLang_Token_Type *); */
-static void block (_SLang_Token_Type *);
-static void inline_array_expression (_SLang_Token_Type *);
-static void array_index_expression (_SLang_Token_Type *);
-static void do_multiple_assignment (_SLang_Token_Type *);
-static void try_multiple_assignment (_SLang_Token_Type *);
-#if 0
-static void not_implemented (char *what)
-{
-   char err [256];
-   sprintf (err, "Expression not implemented: %s", what);
-   _SLparse_error (err, NULL, 0);
-}
-#endif
-static void rpn_parse_line (_SLang_Token_Type *tok)
-{
-   do
-     {
-	  /* multiple RPN tokens possible when the file looks like:
-	   * . <end of line>
-	   * . <end of line>
-	   */
-	if (tok->type != RPN_TOKEN)
-	  compile_token (tok);
-	free_token (tok);
-     }
-   while (EOF_TOKEN != _SLget_rpn_token (tok));
-}
-
-static int get_identifier_token (_SLang_Token_Type *tok)
-{
-   if (IDENT_TOKEN == get_token (tok))
-     return IDENT_TOKEN;
-
-   _SLparse_error ("Expecting identifier", tok, 0);
-   return tok->type;
-}
-
-static void define_function (_SLang_Token_Type *ctok, unsigned char type)
-{
-   _SLang_Token_Type fname;
-   
-   switch (type)
-     {
-      case STATIC_TOKEN:
-	type = DEFINE_STATIC_TOKEN;
-	break;
-	
-      case PUBLIC_TOKEN:
-	type = DEFINE_PUBLIC_TOKEN;
-	break;
-	
-      case PRIVATE_TOKEN:
-	type = DEFINE_PRIVATE_TOKEN;
-     }
-
-   init_token (&fname);
-   if (IDENT_TOKEN != get_identifier_token (&fname))
-     {
-	free_token (&fname);
-	return;
-     }
-
-   compile_token_of_type(OPAREN_TOKEN);
-   get_token (ctok);
-   define_function_args (ctok);
-   compile_token_of_type(FARG_TOKEN);
-
-   if (ctok->type == OBRACE_TOKEN)
-     compound_statement(ctok);
-
-   else if (ctok->type != SEMICOLON_TOKEN)
-     {
-	_SLparse_error("Expecting {", ctok, 0);
-	free_token (&fname);
-	return;
-     }
-
-   fname.type = type;
-   compile_token (&fname);
-   free_token (&fname);
-}
-
-/* statement:
- *	 compound-statement
- *	 if ( expression ) statement
- *	 if ( expression ) statement else statement
- *	 !if ( expression ) statement
- *	 loop ( expression ) statement
- *	 _for ( expression ) statement
- *       foreach ( expression ) statement
- *       foreach (expression ) using (expression-list) statement
- *	 while ( expression ) statement
- *	 do statement while (expression) ;
- *	 for ( expressionopt ; expressionopt ; expressionopt ) statement
- *	 ERROR_BLOCK statement
- *	 EXIT_BLOCK statement
- *	 USER_BLOCK0 statement
- *	 USER_BLOCK1 statement
- *	 USER_BLOCK2 statement
- *	 USER_BLOCK3 statement
- *	 USER_BLOCK4 statement
- *	 forever statement
- *	 break ;
- *	 continue ;
- *	 return expressionopt ;
- *	 variable variable-list ;
- *	 struct struct-decl ;
- *	 define identifier function-args ;
- *	 define identifier function-args compound-statement
- *	 switch ( expression ) statement
- *	 rpn-line
- *	 at-line
- *	 push ( expression )
- *	 ( expression ) = expression ;
- *	 expression ;
- *       expression :
- */
-
-/* Note: This function does not return with a new token.  It is up to the
- * calling routine to handle that.
- */
-static void statement (_SLang_Token_Type *ctok)
-{
-   unsigned char type;
-
-   if (SLang_Error)
-     return;
-
-   LLT->parse_level += 1;
-
-   switch (ctok->type)
-     {
-      case OBRACE_TOKEN:
-	compound_statement (ctok);
-	break;
-
-      case IF_TOKEN:
-      case IFNOT_TOKEN:
-	type = ctok->type;
-	get_token (ctok);
-	expression_with_parenthesis (ctok);
-	block (ctok);
-
-	if (ELSE_TOKEN != get_token (ctok))
-	  {
-	     compile_token_of_type (type);
-	     unget_token (ctok);
-	     break;
-	  }
-	get_token (ctok);
-	block (ctok);
-	if (type == IF_TOKEN) type = ELSE_TOKEN; else type = NOTELSE_TOKEN;
-	compile_token_of_type (type);
-	break;
-
-      /* case IFNOT_TOKEN: */
-      case LOOP_TOKEN:
-      case _FOR_TOKEN:
-	type = ctok->type;
-	get_token (ctok);
-	expression_with_parenthesis (ctok);
-	block (ctok);
-	compile_token_of_type (type);
-	break;
-
-      case FOREACH_TOKEN:
-	get_token (ctok);
-	expression_with_parenthesis (ctok);
-
-	if (NULL == push_token_list ())
-	  break;
-
-	append_token_of_type (ARG_TOKEN);
-	if (ctok->type == USING_TOKEN)
-	  {
-	     if (OPAREN_TOKEN != get_token (ctok))
-	       {
-		  _SLparse_error ("Expected 'using ('", ctok, 0);
-		  break;
-	       }
-	     get_token (ctok);
-	     function_args_expression (ctok, 0);
-	  }
-	append_token_of_type (EARG_TOKEN);
-
-	compile_token_list ();
-
-	block (ctok);
-	compile_token_of_type (FOREACH_TOKEN);
-	break;
-
-      case WHILE_TOKEN:
-	get_token (ctok);
-	compile_token_of_type (OBRACE_TOKEN);
-	expression_with_parenthesis (ctok);
-	compile_token_of_type (CBRACE_TOKEN);
-	block (ctok);
-	compile_token_of_type (WHILE_TOKEN);
-	break;
-
-      case DO_TOKEN:
-	get_token (ctok);
-	block (ctok);
-
-	if (WHILE_TOKEN != get_token (ctok))
-	  {
-	     _SLparse_error("Expecting while", ctok, 0);
-	     break;
-	  }
-
-	get_token (ctok);
-
-	compile_token_of_type (OBRACE_TOKEN);
-	expression_with_parenthesis (ctok);
-	compile_token_of_type (CBRACE_TOKEN);
-	compile_token_of_type (DOWHILE_TOKEN);
-	handle_semicolon (ctok);
-	break;
-
-      case FOR_TOKEN:
-
-	/* Look for (exp_opt ; exp_opt ; exp_opt ) */
-
-	if (OPAREN_TOKEN != get_token (ctok))
-	  {
-	     _SLparse_error("Expecting (.", ctok, 0);
-	     break;
-	  }
-
-	if (NULL == push_token_list ())
-	  break;
-
-	append_token_of_type (OBRACE_TOKEN);
-	if (SEMICOLON_TOKEN != get_token (ctok))
-	  {
-	     expression (ctok);
-	     if (ctok->type != SEMICOLON_TOKEN)
-	       {
-		  _SLparse_error("Expecting ;", ctok, 0);
-		  break;
-	       }
-	  }
-	append_token_of_type (CBRACE_TOKEN);
-
-	append_token_of_type (OBRACE_TOKEN);
-	if (SEMICOLON_TOKEN != get_token (ctok))
-	  {
-	     expression (ctok);
-	     if (ctok->type != SEMICOLON_TOKEN)
-	       {
-		  _SLparse_error("Expecting ;", ctok, 0);
-		  break;
-	       }
-	  }
-	append_token_of_type (CBRACE_TOKEN);
-
-	append_token_of_type (OBRACE_TOKEN);
-	if (CPAREN_TOKEN != get_token (ctok))
-	  {
-	     expression (ctok);
-	     if (ctok->type != CPAREN_TOKEN)
-	       {
-		  _SLparse_error("Expecting ).", ctok, 0);
-		  break;
-	       }
-	  }
-	append_token_of_type (CBRACE_TOKEN);
-
-	compile_token_list ();
-
-	get_token (ctok);
-	block (ctok);
-	compile_token_of_type (FOR_TOKEN);
-	break;
-
-      case ERRBLK_TOKEN:
-      case EXITBLK_TOKEN:
-      case USRBLK0_TOKEN:
-      case USRBLK1_TOKEN:
-      case USRBLK2_TOKEN:
-      case USRBLK3_TOKEN:
-      case USRBLK4_TOKEN:
-      case FOREVER_TOKEN:
-	type = ctok->type;
-	get_token (ctok);
-	block (ctok);
-	compile_token_of_type (type);
-	break;
-
-      case BREAK_TOKEN:
-      case CONT_TOKEN:
-	compile_token_of_type (ctok->type);
-	get_token (ctok);
-	handle_semicolon (ctok);
-	break;
-
-      case RETURN_TOKEN:
-	if (SEMICOLON_TOKEN != get_token (ctok))
-	  {
-	     if (NULL == push_token_list ())
-	       break;
-
-	     expression (ctok);
-
-	     if (ctok->type != SEMICOLON_TOKEN)
-	       {
-		  _SLparse_error ("Expecting ;", ctok, 0);
-		  break;
-	       }
-	     compile_token_list ();
-	  }
-	compile_token_of_type (RETURN_TOKEN);
-	handle_semicolon (ctok);
-	break;
-
-      case STATIC_TOKEN:
-      case PRIVATE_TOKEN:
-      case PUBLIC_TOKEN:
-	type = ctok->type;
-	get_token (ctok);
-	if (ctok->type == VARIABLE_TOKEN)
-	  {
-	     get_token (ctok);
-	     variable_list (ctok, type);
-	     handle_semicolon (ctok);
-	     break;
-	  }
-	if (ctok->type == DEFINE_TOKEN)
-	  {
-	     define_function (ctok, type);
-	     break;
-	  }
-	_SLparse_error ("Expecting 'variable' or 'define'", ctok, 0);
-	break;
-
-      case VARIABLE_TOKEN:
-	get_token (ctok);
-	variable_list (ctok, OBRACKET_TOKEN);
-	handle_semicolon (ctok);
-	break;
-
-      case TYPEDEF_TOKEN:
-	get_token (ctok);
-	if (NULL == push_token_list ())
-	  break;
-	typedef_definition (ctok);
-	compile_token_list ();
-
-	handle_semicolon (ctok);
-	break;
-
-      case DEFINE_TOKEN:
-	define_function (ctok, DEFINE_TOKEN);
-	break;
-
-      case SWITCH_TOKEN:
-	get_token (ctok);
-	expression_with_parenthesis (ctok);
-
-	while ((SLang_Error == 0)
-	       && (OBRACE_TOKEN == ctok->type))
-	  {
-	     compile_token_of_type (OBRACE_TOKEN);
-	     compound_statement (ctok);
-	     compile_token_of_type (CBRACE_TOKEN);
-	     get_token (ctok);
-	  }
-	compile_token_of_type (SWITCH_TOKEN);
-	unget_token (ctok);
-	break;
-
-      case EOF_TOKEN:
-	break;
-#if 0
-      case PUSH_TOKEN:
-	get_token (ctok);
-	expression_list_with_parenthesis (ctok);
-	handle_semicolon (ctok);
-	break;
-#endif
-
-      case SEMICOLON_TOKEN:
-	handle_semicolon (ctok);
-	break;
-
-      case RPN_TOKEN:
-	if (POUND_TOKEN == get_token (ctok))
-	  _SLcompile_byte_compiled ();
-	else if (ctok->type != EOF_TOKEN)
-	  rpn_parse_line (ctok);
-	break;
-
-      case OPAREN_TOKEN:	       /* multiple assignment */
-	try_multiple_assignment (ctok);
-	if (ctok->type == COLON_TOKEN)
-	  compile_token_of_type (COLON_TOKEN);
-	else handle_semicolon (ctok);
-	break;
-
-      default:
-
-	if (NULL == push_token_list ())
-	  break;
-
-	expression (ctok);
-	compile_token_list ();
-
-	if (ctok->type == COLON_TOKEN)
-	  compile_token_of_type (COLON_TOKEN);
-	else handle_semicolon (ctok);
-	break;
-     }
-
-   LLT->parse_level -= 1;
-}
-
-static void block (_SLang_Token_Type *ctok)
-{
-   compile_token_of_type (OBRACE_TOKEN);
-   statement (ctok);
-   compile_token_of_type (CBRACE_TOKEN);
-}
-
-/*
- * statement-list:
- *	 statement
- *	 statement-list statement
- */
-static void statement_list (_SLang_Token_Type *ctok)
-{
-   while ((SLang_Error == 0)
-	  && (ctok->type != CBRACE_TOKEN)
-	  && (ctok->type != EOF_TOKEN))
-     {
-	statement(ctok);
-	get_token (ctok);
-     }
-}
-
-/* compound-statement:
- *	 { statement-list }
- */
-static void compound_statement (_SLang_Token_Type *ctok)
-{
-   /* ctok->type is OBRACE_TOKEN here */
-   get_token (ctok);
-   statement_list(ctok);
-   if (CBRACE_TOKEN != ctok->type)
-     {
-	_SLparse_error ("Expecting '}'", ctok, 0);
-	return;
-     }
-}
-
-/* This function is only called from statement. */
-static void expression_with_parenthesis (_SLang_Token_Type *ctok)
-{
-   if (ctok->type != OPAREN_TOKEN)
-     {
-	_SLparse_error("Expecting (", ctok, 0);
-	return;
-     }
-
-   if (NULL == push_token_list ())
-     return;
-
-   get_token (ctok);
-   expression (ctok);
-
-   if (ctok->type != CPAREN_TOKEN)
-     _SLparse_error("Expecting )", ctok, 0);
-
-   compile_token_list ();
-
-   get_token (ctok);
-}
-
-static void handle_semicolon (_SLang_Token_Type *ctok)
-{
-   if ((ctok->type == SEMICOLON_TOKEN)
-       || (ctok->type == EOF_TOKEN))
-     return;
-
-   _SLparse_error ("Expecting ;", ctok, 0);
-}
-
-void _SLparse_start (SLang_Load_Type *llt)
-{
-   _SLang_Token_Type ctok;
-   SLang_Load_Type *save_llt;
-   unsigned int save_use_next_token;
-   _SLang_Token_Type save_next_token;
-   Token_List_Type *save_list;
-#if _SLANG_HAS_DEBUG_CODE
-   int save_last_line_number = Last_Line_Number;
-
-   Last_Line_Number = -1;
-#endif
-   save_use_next_token = Use_Next_Token;
-   save_next_token = Next_Token;
-   save_list = Token_List;
-   save_llt = LLT;
-   LLT = llt;
-
-   init_token (&Next_Token);
-   Use_Next_Token = 0;
-   init_token (&ctok);
-   get_token (&ctok);
-
-   llt->parse_level = 0;
-   statement_list (&ctok);
-
-   if ((SLang_Error == 0)
-       && (ctok.type != EOF_TOKEN))
-     _SLparse_error ("Parse ended prematurely", &ctok, 0);
-   
-
-   if (SLang_Error)
-     {
-	if (SLang_Error < 0)	       /* severe error */
-	  save_list = NULL;
-
-	while (Token_List != save_list)
-	  {
-	     if (-1 == pop_token_list (1))
-	       break;		       /* ??? when would this happen? */
-	  }
-     }
-
-   free_token (&ctok);
-   LLT = save_llt;
-   if (Use_Next_Token)
-     free_token (&Next_Token);
-   Use_Next_Token = save_use_next_token;
-   Next_Token = save_next_token;
-#if _SLANG_HAS_DEBUG_CODE
-   Last_Line_Number = save_last_line_number;
-#endif
-}
-
-/* variable-list:
- * 	variable-decl
- * 	variable-decl variable-list
- *
- * variable-decl:
- * 	identifier
- * 	identifier = simple-expression
- */
-static void variable_list (_SLang_Token_Type *name_token, unsigned char variable_type)
-{
-   int declaring;
-   _SLang_Token_Type tok;
-
-   if (name_token->type != IDENT_TOKEN)
-     {
-	_SLparse_error ("Expecting a variable name", name_token, 0);
-	return;
-     }
-
-   declaring = 0;
-   do
-     {
-	if (declaring == 0)
-	  {
-	     declaring = 1;
-	     compile_token_of_type (variable_type);
-	  }
-
-	compile_token (name_token);
-
-	init_token (&tok);
-	if (ASSIGN_TOKEN == get_token (&tok))
-	  {
-	     compile_token_of_type (CBRACKET_TOKEN);
-	     declaring = 0;
-
-	     get_token (&tok);
-
-	     push_token_list ();
-	     simple_expression (&tok);
-	     compile_token_list ();
-
-	     name_token->type = _SCALAR_ASSIGN_TOKEN;
-	     compile_token (name_token);
-	  }
-
-	free_token (name_token);
-	*name_token = tok;
-     }
-   while ((name_token->type == COMMA_TOKEN)
-	  && (IDENT_TOKEN == get_token (name_token)));
-
-   if (declaring) compile_token_of_type (CBRACKET_TOKEN);
-}
-
-/* struct-declaration:
- * 	struct { struct-field-list };
- *
- * struct-field-list:
- * 	struct-field-name , struct-field-list
- * 	struct-field-name
- *
- * Generates code: "field-name-1" ... "field-name-N" N STRUCT_TOKEN
- */
-static void struct_declaration (_SLang_Token_Type *ctok)
-{
-   int n;
-   _SLang_Token_Type num_tok;
-
-   if (ctok->type != OBRACE_TOKEN)
-     {
-	_SLparse_error ("Expecting {", ctok, 0);
-	return;
-     }
-
-   n = 0;
-   while (IDENT_TOKEN == get_token (ctok))
-     {
-	n++;
-	ctok->type = STRING_TOKEN;
-	append_token (ctok);
-	if (COMMA_TOKEN != get_token (ctok))
-	  break;
-     }
-
-   if (ctok->type != CBRACE_TOKEN)
-     {
-	_SLparse_error ("Expecting }", ctok, 0);
-	return;
-     }
-   if (n == 0)
-     {
-	_SLparse_error ("struct requires at least 1 field", ctok, 0);
-	return;
-     }
-
-   init_token (&num_tok);
-   num_tok.type = INT_TOKEN;
-   num_tok.v.long_val = n;
-   append_token (&num_tok);
-   append_token_of_type (STRUCT_TOKEN);
-
-   get_token (ctok);
-}
-
-/* struct-declaration:
- * 	typedef struct { struct-field-list } Type_Name;
- *
- * struct-field-list:
- * 	struct-field-name , struct-field-list
- * 	struct-field-name
- *
- * Generates code: "field-name-1" ... "field-name-N" N STRUCT_TOKEN typedef
- */
-static void typedef_definition (_SLang_Token_Type *t)
-{
-
-   if (t->type != STRUCT_TOKEN)
-     {
-	_SLparse_error ("Expecting `struct'", t, 0);
-	return;
-     }
-   get_token (t);
-
-   struct_declaration (t);
-   if (t->type != IDENT_TOKEN)
-     {
-	_SLparse_error ("Expecting identifier", t, 0);
-	return;
-     }
-
-   t->type = STRING_TOKEN;
-   append_token (t);
-   append_token_of_type (TYPEDEF_TOKEN);
-
-   get_token (t);
-}
-
-/* function-args:
- * 	( args-dec-opt )
- *
- * args-decl-opt:
- * 	identifier
- * 	args-decl , identifier
- */
-static void define_function_args (_SLang_Token_Type *ctok)
-{
-   if (CPAREN_TOKEN == get_token (ctok))
-     {
-	get_token (ctok);
-	return;
-     }
-
-   compile_token_of_type(OBRACKET_TOKEN);
-
-   while ((SLang_Error == 0)
-	  && (ctok->type == IDENT_TOKEN))
-     {
-	compile_token (ctok);
-	if (COMMA_TOKEN != get_token (ctok))
-	  break;
-
-	get_token (ctok);
-     }
-
-   if (CPAREN_TOKEN != ctok->type)
-     {
-	_SLparse_error("Expecting )", ctok, 0);
-	return;
-     }
-   compile_token_of_type(CBRACKET_TOKEN);
-
-   get_token (ctok);
-}
-
-void try_multiple_assignment (_SLang_Token_Type *ctok)
-{
-   /* This is called with ctok->type == OPAREN_TOKEN.  We have no idea
-    * what follows this.  There are various possibilities such as:
-    * @  () = x;
-    * @  ( expression ) = x;
-    * @  ( expression ) ;
-    * @  ( expression ) OP expression;
-    * @  ( expression ) [expression] = expression;
-    * and only the first two constitute a multiple assignment.  The last
-    * two forms create the difficulty.
-    *
-    * Here is the plan.  First parse (expression) and then check next token.
-    * If it is an equal operator, then it will be parsed as a multiple
-    * assignment.  In fact, that is the easy part.
-    *
-    * The hard part stems from the fact that by parsing (expression), we
-    * have effectly truncated the parse if (expression) is part of a binary
-    * or unary expression.  Somehow, the parsing must be resumed.  The trick
-    * here is to use a dummy literal that generates no code: NO_OP_LITERAL
-    * Using it, we just call 'expression' and proceed.
-    */
-
-   if (NULL == push_token_list ())
-     return;
-
-   get_token (ctok);
-
-   if (ctok->type != CPAREN_TOKEN)
-     {
-	expression_with_commas (ctok, 1);
-	if (ctok->type != CPAREN_TOKEN)
-	  {
-	     _SLparse_error ("Expecting )", ctok, 0);
-	     return;
-	  }
-     }
-
-   switch (get_token (ctok))
-     {
-      case ASSIGN_TOKEN:
-      case PLUSEQS_TOKEN:
-      case MINUSEQS_TOKEN:
-      case TIMESEQS_TOKEN:
-      case DIVEQS_TOKEN:
-      case BOREQS_TOKEN:
-      case BANDEQS_TOKEN:
-	do_multiple_assignment (ctok);
-	pop_token_list (1);
-	break;
-
-      default:
-	unget_token (ctok);
-	ctok->type = NO_OP_LITERAL;
-	expression (ctok);
-	compile_token_list ();
-	break;
-     }
-}
-
-/* Note:  expression never gets compiled directly.  Rather, it gets
- *        appended to the token list and then compiled by a calling
- *        routine.
- */
-
-/* expression:
- *	 simple_expression
- *	 simple-expression , expression
- *       <none>
- */
-static void expression_with_commas (_SLang_Token_Type *ctok, int save_comma)
-{
-   while (SLang_Error == 0)
-     {
-	if (ctok->type != COMMA_TOKEN)
-	  {
-	     if (ctok->type == CPAREN_TOKEN)
-	       return;
-
-	     simple_expression (ctok);
-
-	     if (ctok->type != COMMA_TOKEN)
-	       break;
-	  }
-	if (save_comma) append_token (ctok);
-	get_token (ctok);
-     }
-}
-
-static void expression (_SLang_Token_Type *ctok)
-{
-   expression_with_commas (ctok, 0);
-}
-
-/* priority levels of binary operations */
-static unsigned char Binop_Level[] =
-{
-/* ADD_TOKEN */		2,
-/* SUB_TOKEN */		2,
-/* MUL_TOKEN */		1,
-/* DIV_TOKEN */		1,
-/* LT_TOKEN */		4,
-/* LE_TOKEN */		4,
-/* GT_TOKEN */		4,
-/* GE_TOKEN */		4,
-/* EQ_TOKEN */		5,
-/* NE_TOKEN */		5,
-/* AND_TOKEN */		9,
-/* OR_TOKEN */		10,
-/* MOD_TOKEN */		1,
-/* BAND_TOKEN */	6,
-/* SHL_TOKEN */		3,
-/* SHR_TOKEN */		3,
-/* BXOR_TOKEN */	7,
-/* BOR_TOKEN */		8,
-/* POUND_TOKEN */	1  /* Matrix Multiplication */
-};
-
-/* % Note: simple-expression groups operators OP1 at same level.  The
- * % actual implementation will not do this.
- * simple-expression:
- *	 unary-expression
- *	 binary-expression BINARY-OP unary-expression
- *       andelse xxelse-expression-list
- *       orelse xxelse-expression-list
- *
- * xxelse-expression-list:
- * 	{ expression }
- * 	xxelse-expression-list { expression }
- * binary-expression:
- *      unary-expression
- *      unary-expression BINARY-OP binary-expression
- */
-static void simple_expression (_SLang_Token_Type *ctok)
-{
-   unsigned char type;
-   unsigned char op_stack [64];
-   unsigned char level_stack [64];
-   unsigned char level;
-   unsigned int op_num;
-
-   switch (ctok->type)
-     {
-      case ANDELSE_TOKEN:
-      case ORELSE_TOKEN:
-	type = ctok->type;
-	if (OBRACE_TOKEN != get_token (ctok))
-	  {
-	     _SLparse_error ("Expecting '{'", ctok, 0);
-	     return;
-	  }
-
-	while (ctok->type == OBRACE_TOKEN)
-	  {
-	     append_token (ctok);
-	     get_token (ctok);
-	     expression (ctok);
-	     if (CBRACE_TOKEN != ctok->type)
-	       {
-		  _SLparse_error("Expecting }", ctok, 0);
-		  return;
-	       }
-	     append_token (ctok);
-	     get_token (ctok);
-	  }
-	append_token_of_type (type);
-	return;
-
-	/* avoid unary-expression if possible */
-      case STRING_TOKEN:
-	append_token (ctok);
-	get_token (ctok);
-	break;
-
-      default:
-	unary_expression (ctok);
-	break;
-     }
-
-   if (SEMICOLON_TOKEN == (type = ctok->type))
-     return;
-
-   op_num = 0;
-
-   while ((SLang_Error == 0)
-	  && (IS_BINARY_OP(type)))
-     {
-	level = Binop_Level[type - FIRST_BINARY_OP];
-
-	while ((op_num > 0) && (level_stack [op_num - 1] <= level))
-	  append_token_of_type (op_stack [--op_num]);
-
-	if (op_num >= sizeof (op_stack) - 1)
-	  {
-	     _SLparse_error ("Binary op stack overflow", ctok, 0);
-	     return;
-	  }
-
-	op_stack [op_num] = type;
-	level_stack [op_num] = level;
-	op_num++;
-
-	get_token (ctok);
-	unary_expression (ctok);
-	type = ctok->type;
-     }
-
-   while (op_num > 0)
-     append_token_of_type(op_stack[--op_num]);
-}
-
-/* unary-expression:
- *	 postfix-expression
- *	 ++ postfix-expression
- *	 -- postfix-expression
- *	 case unary-expression
- *	 OP3 unary-expression
- *	 (OP3: + - ~ & not @)
- *
- * Note:  This grammar permits: case case case WHATEVER
- */
-static void unary_expression (_SLang_Token_Type *ctok)
-{
-   unsigned char save_unary_ops [16];
-   unsigned int num_unary_ops;
-   unsigned char type;
-   _SLang_Token_Type *last_token;
-
-   num_unary_ops = 0;
-   while (SLang_Error == 0)
-     {
-	type = ctok->type;
-
-	switch (type)
-	  {
-	   case PLUSPLUS_TOKEN:
-	   case MINUSMINUS_TOKEN:
-	     get_token (ctok);
-	     postfix_expression (ctok);
-	     check_for_lvalue (type, NULL);
-	     goto out_of_switch;
-
-	   case ADD_TOKEN:
-	     get_token (ctok);	       /* skip it-- it's unary here */
-	     break;
-
-	   case SUB_TOKEN:
-	     (void) get_token (ctok);
-	     if (IS_INTEGER_TOKEN (ctok->type))
-	       {
-		  ctok->v.long_val = -ctok->v.long_val;
-		  break;
-	       }
-
-	     if (num_unary_ops == 16)
-	       goto stack_overflow_error;
-	     save_unary_ops [num_unary_ops++] = CHS_TOKEN;
-	     break;
-
-	   case DEREF_TOKEN:
-	   case BNOT_TOKEN:
-	   case NOT_TOKEN:
-	   case CASE_TOKEN:
-	     if (num_unary_ops == 16)
-	       goto stack_overflow_error;
-
-	     save_unary_ops [num_unary_ops++] = type;
-	     get_token (ctok);
-	     break;
-
-	     /* Try to avoid ->postfix_expression->primary_expression
-	      * subroutine calls.
-	      */
-	   case STRING_TOKEN:
-	     append_token (ctok);
-	     get_token (ctok);
-	     goto out_of_switch;
-
-	   default:
-	     postfix_expression (ctok);
-	     goto out_of_switch;
-	  }
-     }
-
-   out_of_switch:
-   if (num_unary_ops == 0)
-     return;
-
-   if ((DEREF_TOKEN == save_unary_ops[num_unary_ops - 1])
-       && (NULL != (last_token = get_last_token ()))
-       && (IS_ASSIGN_TOKEN(last_token->type)))
-     {
-	/* FIXME: Priority=medium
-	 * This needs generalized so that things like @a.y = 1 will work properly.
-	 */
-	if ((num_unary_ops != 1)
-	    || (last_token->type != _SCALAR_ASSIGN_TOKEN))
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED, 
-			   "Only derefence assignments to simple variables are possible");
-	     return;
-	  }
-
-	last_token->type += (_DEREF_ASSIGN_TOKEN - _SCALAR_ASSIGN_TOKEN);
-	return;
-     }
-
-   while (num_unary_ops)
-     {
-	num_unary_ops--;
-	append_token_of_type (save_unary_ops [num_unary_ops]);
-     }
-   return;
-
-   stack_overflow_error:
-   _SLparse_error ("Too many unary operators.", ctok, 0);
-}
-
-static int combine_namespace_tokens (_SLang_Token_Type *a, _SLang_Token_Type *b)
-{
-   char *sa, *sb, *sc;
-   unsigned int lena, lenb;
-   unsigned long hash;
-
-   /* This is somewhat of a hack.  Combine the TWO identifier names
-    * (NAMESPACE) and (name) into the form NAMESPACE->name.  Then when the
-    * byte compiler compiles the object it will not be found.  It will then
-    * check for this hack and make the appropriate namespace lookup.
-    */
-
-   sa = a->v.s_val;
-   sb = b->v.s_val;
-
-   lena = strlen (sa);
-   lenb = strlen (sb);
-
-   sc = SLmalloc (lena + lenb + 3);
-   if (sc == NULL)
-     return -1;
-
-   strcpy (sc, sa);
-   strcpy (sc + lena, "->");
-   strcpy (sc + lena + 2, sb);
-
-   sb = _SLstring_make_hashed_string (sc, lena + lenb + 2, &hash);
-   SLfree (sc);
-   if (sb == NULL)
-     return -1;
-
-   /* I can free this string because no other token should be referencing it.
-    * (num_refs == 1).
-    */
-   _SLfree_hashed_string (sa, lena, a->hash);
-   a->v.s_val = sb;
-   a->hash = hash;
-
-   return 0;
-}
-
-static void append_identifier_token (_SLang_Token_Type *ctok)
-{
-   _SLang_Token_Type *last_token;
-
-   append_token (ctok);
-
-   if (NAMESPACE_TOKEN != get_token (ctok))
-     return;
-
-   if (IDENT_TOKEN != get_token (ctok))
-     {
-	_SLparse_error ("Expecting name-space identifier", ctok, 0);
-	return;
-     }
-
-   last_token = get_last_token ();
-   if (-1 == combine_namespace_tokens (last_token, ctok))
-     return;
-
-   (void) get_token (ctok);
-}
-
-static int get_identifier_expr_token (_SLang_Token_Type *ctok)
-{
-   _SLang_Token_Type next_token;
-
-   if (IDENT_TOKEN != get_identifier_token (ctok))
-     return -1;
-
-   init_token (&next_token);
-   if (NAMESPACE_TOKEN != get_token (&next_token))
-     {
-	unget_token (&next_token);
-	return IDENT_TOKEN;
-     }
-
-   if (IDENT_TOKEN != get_identifier_token (&next_token))
-     {
-	free_token (&next_token);
-	return -1;
-     }
-
-   if (-1 == combine_namespace_tokens (ctok, &next_token))
-     {
-	free_token (&next_token);
-	return -1;
-     }
-   free_token (&next_token);
-   return IDENT_TOKEN;
-}
-
-/* postfix-expression:
- *	 primary-expression
- *	 postfix-expression [ expression ]
- *	 postfix-expression ( function-args-expression )
- *	 postfix-expression . identifier
- *       postfix-expression ^ unary-expression
- *	 postfix-expression ++
- *	 postfix-expression --
- *	 postfix-expression = simple-expression
- *	 postfix-expression += simple-expression
- *	 postfix-expression -= simple-expression
- *
- * primary-expression:
- *	literal
- *	identifier-expr
- *	( expression_opt )
- * 	[ inline-array-expression ]
- * 	&identifier-expr
- *      struct-definition
- *      __tmp(identifier-expr)
- *
- * identifier-expr:
- *      identifier
- *      identifier->identifier
- */
-static void postfix_expression (_SLang_Token_Type *ctok)
-{
-   unsigned int start_pos, end_pos;
-   unsigned char type;
-
-   if (Token_List == NULL)
-     return;
-
-   start_pos = Token_List->len;
-
-   switch (ctok->type)
-     {
-      case IDENT_TOKEN:
-	append_identifier_token (ctok);
-	break;
-
-      case CHAR_TOKEN:
-      case SHORT_TOKEN:
-      case INT_TOKEN:
-      case LONG_TOKEN:
-      case UCHAR_TOKEN:
-      case USHORT_TOKEN:
-      case UINT_TOKEN:
-      case ULONG_TOKEN:
-      case STRING_TOKEN:
-      case BSTRING_TOKEN:
-#ifdef SLANG_HAS_FLOAT
-      case DOUBLE_TOKEN:
-      case FLOAT_TOKEN:
-#endif
-#ifdef SLANG_HAS_COMPLEX
-      case COMPLEX_TOKEN:
-#endif
-	append_token (ctok);
-	get_token (ctok);
-	break;
-
-      case OPAREN_TOKEN:
-	if (CPAREN_TOKEN != get_token (ctok))
-	  {
-	     expression (ctok);
-	     if (ctok->type != CPAREN_TOKEN)
-	       _SLparse_error("Expecting )", ctok, 0);
-	  }
-	get_token (ctok);
-	break;
-
-      case BAND_TOKEN:
-	if (IDENT_TOKEN != get_identifier_expr_token (ctok))
-	  break;
-
-	ctok->type = _REF_TOKEN;
-	append_token (ctok);
-	get_token (ctok);
-	break;
-
-      case OBRACKET_TOKEN:
-	get_token (ctok);
-	inline_array_expression (ctok);
-	break;
-
-      case NO_OP_LITERAL:
-	/* This token was introduced by try_multiple_assignment.  There,
-	 * a new token_list was pushed and (expression) was evaluated.
-	 * NO_OP_LITERAL represents the result of expression.  However,
-	 * we need to tweak the start_pos variable to point to the beginning
-	 * of the token list to complete the equivalence.
-	 */
-	start_pos = 0;
-	get_token (ctok);
-	break;
-
-      case STRUCT_TOKEN:
-	get_token (ctok);
-	struct_declaration (ctok);
-	break;
-
-      case TMP_TOKEN:
-	get_token (ctok);
-	if (ctok->type == OPAREN_TOKEN)
-	  {
-	     if (IDENT_TOKEN == get_identifier_expr_token (ctok))
-	       {
-		  ctok->type = TMP_TOKEN;
-		  append_token (ctok);
-		  get_token (ctok);
-		  if (ctok->type == CPAREN_TOKEN)
-		    {
-		       get_token (ctok);
-		       break;
-		    }
-	       }
-	  }
-	_SLparse_error ("Expecting form __tmp(NAME)", ctok, 0);
-	break;
-
-      default:
-	if (IS_INTERNAL_FUNC(ctok->type))
-	  {
-	     append_token (ctok);
-	     get_token (ctok);
-	  }
-	else
-	  _SLparse_error("Expecting a PRIMARY", ctok, 0);
-     }
-
-   while (SLang_Error == 0)
-     {
-	end_pos = Token_List->len;
-	type = ctok->type;
-	switch (type)
-	  {
-	   case OBRACKET_TOKEN:	       /* X[args] ==> [args] X ARRAY */
-	     get_token (ctok);
-	     append_token_of_type (ARG_TOKEN);
-	     if (ctok->type != CBRACKET_TOKEN) 
-	       array_index_expression (ctok);
-
-	     if (ctok->type != CBRACKET_TOKEN)
-	       {
-		  _SLparse_error ("Expecting ']'", ctok, 0);
-		  return;
-	       }
-	     get_token (ctok);
-	     /* append_token_of_type (EARG_TOKEN); -- ARRAY_TOKEN implicitely does this */
-	     token_list_element_exchange (start_pos, end_pos);
-	     append_token_of_type (ARRAY_TOKEN);
-	     break;
-
-	   case OPAREN_TOKEN:
-	     /* f(args) ==> args f */
-	     if (CPAREN_TOKEN != get_token (ctok))
-	       {
-		  function_args_expression (ctok, 1);
-		  token_list_element_exchange (start_pos, end_pos);
-	       }
-	     else get_token (ctok);
-	     break;
-
-	   case DOT_TOKEN:
-	     /* S.a ==> "a" S DOT
-	      * This means that if S is X[b], then X[b].a ==> a b X ARRAY DOT
-	      * and f(a).X[b].c ==> "c" b "X" a f . ARRAY .
-	      * Also, f(a).X[b] = g(x); ==> x g b "X" a f .
-	      */
-	     if (IDENT_TOKEN != get_identifier_token (ctok))
-	       return;
-
-	     ctok->type = DOT_TOKEN;
-	     append_token (ctok);
-	     get_token (ctok);
-	     break;
-
-	   case PLUSPLUS_TOKEN:
-	   case MINUSMINUS_TOKEN:
-	     check_for_lvalue (type, NULL);
-	     get_token (ctok);
-	     break;
-
-	   case ASSIGN_TOKEN:
-	   case PLUSEQS_TOKEN:
-	   case MINUSEQS_TOKEN:
-	   case TIMESEQS_TOKEN:
-	   case DIVEQS_TOKEN:
-	   case BOREQS_TOKEN:
-	   case BANDEQS_TOKEN:
-	     check_for_lvalue (type, NULL);
-	     get_token (ctok);
-	     simple_expression (ctok);
-	     token_list_element_exchange (start_pos, end_pos);
-	     break;
-
-	   case POW_TOKEN:
-	     get_token (ctok);
-	     unary_expression (ctok);
-	     append_token_of_type (POW_TOKEN);
-	     break;
-
-	   default:
-	     return;
-	  }
-     }
-}
-
-static void function_args_expression (_SLang_Token_Type *ctok, int handle_num_args)
-{
-   unsigned char last_type, this_type;
-
-   if (handle_num_args) append_token_of_type (ARG_TOKEN);
-
-   last_type = COMMA_TOKEN;
-
-   while (SLang_Error == 0)
-     {
-	this_type = ctok->type;
-
-	switch (this_type)
-	  {
-	   case COMMA_TOKEN:
-	     if (last_type == COMMA_TOKEN)
-	       append_token_of_type (_NULL_TOKEN);
-	     get_token (ctok);
-	     break;
-
-	   case CPAREN_TOKEN:
-	     if (last_type == COMMA_TOKEN)
-	       append_token_of_type (_NULL_TOKEN);
-	     if (handle_num_args) append_token_of_type (EARG_TOKEN);
-	     get_token (ctok);
-	     return;
-
-	   default:
-	     simple_expression (ctok);
-	     if ((ctok->type != COMMA_TOKEN)
-		 && (ctok->type != CPAREN_TOKEN))
-	       {
-		  _SLparse_error ("Expecting ')'", ctok, 0);
-		  break;
-	       }
-	  }
-	last_type = this_type;
-     }
-}
-
-static int check_for_lvalue (unsigned char eqs_type, _SLang_Token_Type *ctok)
-{
-   unsigned char type;
-
-   if ((ctok == NULL)
-       && (NULL == (ctok = get_last_token ())))
-     return -1;
-
-   type = ctok->type;
-
-   eqs_type -= ASSIGN_TOKEN;
-
-   if (type == IDENT_TOKEN)
-     eqs_type += _SCALAR_ASSIGN_TOKEN;
-   else if (type == ARRAY_TOKEN)
-     eqs_type += _ARRAY_ASSIGN_TOKEN;
-   else if (type == DOT_TOKEN)
-     eqs_type += _STRUCT_ASSIGN_TOKEN;
-   else
-     {
-	_SLparse_error ("Expecting LVALUE", ctok, 0);
-	return -1;
-     }
-
-   ctok->type = eqs_type;
-   return 0;
-}
-
-static void array_index_expression (_SLang_Token_Type *ctok)
-{
-   unsigned int num_commas;
-
-   num_commas = 0;
-   while (1)
-     {
-	switch (ctok->type)
-	  {
-	   case COLON_TOKEN:
-	     if (num_commas)
-	       _SLparse_error ("Misplaced ':'", ctok, 0);
-	     return;
-	     
-	   case TIMES_TOKEN:
-	     append_token_of_type (_INLINE_WILDCARD_ARRAY_TOKEN);
-	     get_token (ctok);
-	     break;
-	     
-	   case COMMA_TOKEN:
-	     _SLparse_error ("Misplaced ','", ctok, 0);
-	     return;
-	     
-	   default:
-	     simple_expression (ctok);
-	  }
-	
-	if (ctok->type != COMMA_TOKEN)
-	  return;
-	num_commas++;
-	get_token (ctok);
-     }
-}
-
-/* inline-array-expression:
- *    array_index_expression
- *    simple_expression : simple_expression
- *    simple_expression : simple_expression : simple_expression
- */
-static void inline_array_expression (_SLang_Token_Type *ctok)
-{
-   int num_colons = 0;
-
-   append_token_of_type (ARG_TOKEN);
-
-   if (ctok->type == COLON_TOKEN)	       /* [:...] */
-     append_token_of_type (_NULL_TOKEN);
-   else if (ctok->type != CBRACKET_TOKEN) 
-     array_index_expression (ctok);
-
-   if (ctok->type == COLON_TOKEN)
-     {
-	num_colons++;
-	if ((COLON_TOKEN == get_token (ctok))
-	    || (ctok->type == CBRACKET_TOKEN))
-	  append_token_of_type (_NULL_TOKEN);
-	else
-	  simple_expression (ctok);
-
-	if (ctok->type == COLON_TOKEN)
-	  {
-	     num_colons++;
-	     get_token (ctok);
-	     simple_expression (ctok);
-	  }
-     }
-
-   if (ctok->type != CBRACKET_TOKEN)
-     {
-	_SLparse_error ("Expecting ']'", ctok, 0);
-	return;
-     }
-
-   /* append_token_of_type (EARG_TOKEN); */
-   if (num_colons)
-     append_token_of_type (_INLINE_IMPLICIT_ARRAY_TOKEN);
-   else
-     append_token_of_type (_INLINE_ARRAY_TOKEN);
-   get_token (ctok);
-}
-
-static void do_multiple_assignment (_SLang_Token_Type *ctok)
-{
-   _SLang_Token_Type *s;
-   unsigned int i, k, len;
-   unsigned char assign_type;
-
-   assign_type = ctok->type;
-
-   /* The LHS token list has already been pushed.  Here we do the RHS
-    * so push to another token list, process it, then come back to
-    * LHS for assignment.
-    */
-   if (NULL == push_token_list ())
-     return;
-
-   get_token (ctok);
-   expression (ctok);
-   compile_token_list ();
-
-   if (SLang_Error)
-     return;
-
-   /* Finally compile the LHS of the assignment expression
-    * that has been saved.
-    */
-   s = Token_List->stack;
-   len = Token_List->len;
-
-   if (len == 0)
-     {
-	compile_token_of_type (POP_TOKEN);
-	return;
-     }
-
-   while (len > 0)
-     {
-	/* List is of form:
-	 *    a , b, c d e, f , g , , , h ,
-	 * The missing expressions will be replaced by a POP
-	 * ,,a
-	 */
-
-	/* Start from back looking for a COMMA */
-	k = len - 1;
-	if (s[k].type == COMMA_TOKEN)
-	  {
-	     compile_token_of_type (POP_TOKEN);
-	     len = k;
-	     continue;
-	  }
-
-	if (-1 == check_for_lvalue (assign_type, s + k))
-	  return;
-
-	i = 0;
-	while (1)
-	  {
-	     if (s[k].type == COMMA_TOKEN)
-	       {
-		  i = k + 1;
-		  break;
-	       }
-
-	     if (k == 0)
-	       break;
-
-	     k--;
-	  }
-
-	while (i < len)
-	  {
-	     compile_token (s + i);
-	     i++;
-	  }
-
-	len = k;
-     }
-
-   if (s[0].type == COMMA_TOKEN)
-     compile_token_of_type (POP_TOKEN);
-}
-
diff --git a/mdk-stage1/slang/slpath.c b/mdk-stage1/slang/slpath.c
deleted file mode 100644
index 831bd34df..000000000
--- a/mdk-stage1/slang/slpath.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/* Pathname and filename functions */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#ifdef HAVE_IO_H
-# include <io.h>
-#endif
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <time.h>
-
-#include <errno.h>
-#include <string.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* In this file, all file names are assumed to be specified in the Unix
- * format, or in the native format.
- *
- * Aboout VMS:
- * VMS pathnames are a mess.  In general, they look like
- * node::device:[dir.dir]file.ext;version
- * and I do not know of a well-defined Unix representation for them.  So,
- * I am going to punt and encourage users to stick to the native
- * representation.
- */
-
-#if defined(IBMPC_SYSTEM)
-# define PATH_SEP		'\\'
-# define DRIVE_SPECIFIER	':'
-# define SEARCH_PATH_DELIMITER	';'
-# define THIS_DIR_STRING	"."
-#else
-# if defined(VMS)
-#  define PATH_SEP		']'
-#  define DRIVE_SPECIFIER	':'
-#  define SEARCH_PATH_DELIMITER	' '
-#  define THIS_DIR_STRING	"[]"   /* Is this correct?? */
-# else
-#  define PATH_SEP		'/'
-#  define UNIX_PATHNAMES_OK
-#  define SEARCH_PATH_DELIMITER	':'
-#  define THIS_DIR_STRING	"."
-# endif
-#endif
-
-#ifdef UNIX_PATHNAMES_OK
-# define IS_PATH_SEP(x) ((x) == PATH_SEP)
-#else
-# define IS_PATH_SEP(x)	(((x) == PATH_SEP) || ((x) == '/'))
-#endif
-
-/* If file is /a/b/c/basename, this function returns a pointer to basename */
-char *SLpath_basename (char *file)
-{
-   char *b;
-
-   if (file == NULL) return NULL;
-   b = file + strlen (file);
-
-   while (b != file)
-     {
-	b--;
-	if (IS_PATH_SEP(*b))
-	  return b + 1;
-#ifdef DRIVE_SPECIFIER
-	if (*b == DRIVE_SPECIFIER)
-	  return b + 1;
-#endif
-     }
-
-   return b;
-}
-
-/* Returns a malloced string */
-char *SLpath_pathname_sans_extname (char *file)
-{
-   char *b;
-
-   file = SLmake_string (file);
-   if (file == NULL)
-     return NULL;
-
-   b = file + strlen (file);
-
-   while (b != file)
-     {
-	b--;
-	if (*b == '.')
-	  {
-	     *b = 0;
-	     return file;
-	  }
-     }
-
-   return file;
-}
-
-/* If path looks like: A/B/C/D/whatever, it returns A/B/C/D as a malloced 
- * string.
- */
-char *SLpath_dirname (char *file)
-{
-   char *b;
-
-   if (file == NULL) return NULL;
-   b = file + strlen (file);
-
-   while (b != file)
-     {
-	b--;
-	if (IS_PATH_SEP(*b))
-	  {
-	     if (b == file) b++;
-	     break;
-	  }
-
-#ifdef DRIVE_SPECIFIER
-	if (*b == DRIVE_SPECIFIER)
-	  {
-	     b++;
-	     break;
-	  }
-#endif
-     }
-   
-   if (b == file)
-     return SLmake_string (THIS_DIR_STRING);
-   
-   return SLmake_nstring (file, (unsigned int) (b - file));
-}
-
-/* Note: VMS filenames also contain version numbers.  The caller will have
- * to deal with that.
- * 
- * The extension includes the '.'.  If no extension is present, "" is returned.
- */
-char *SLpath_extname (char *file)
-{
-   char *b;
-
-   if (NULL == (file = SLpath_basename (file)))
-     return NULL;
-
-   b = file + strlen (file);
-   while (b != file)
-     {
-	b--;
-	if (*b == '.')
-	  return b;
-     }
-   
-   if (*b == '.')
-     return b;
-
-   /* Do not return a literal "" */
-   return file + strlen (file);
-}
-
-#ifdef IBMPC_SYSTEM
-static void convert_slashes (char *f)
-{
-   while (*f)
-     {
-	if (*f == '/') *f = PATH_SEP;
-	f++;
-     }
-}
-#endif
-
-int SLpath_is_absolute_path (char *name)
-{
-#ifdef UNIX_PATHNAMES_OK
-   return (*name == '/');
-#else
-   if (IS_PATH_SEP (*name))
-     return 1;
-
-# ifdef DRIVE_SPECIFIER
-   /* Look for a drive specifier */
-   while (*name)
-     {
-	if (*name == DRIVE_SPECIFIER)
-	  return 1;
-
-	name++;
-     }
-# endif
-
-   return 0;
-#endif
-}
-
-/* This returns a MALLOCED string */
-char *SLpath_dircat (char *dir, char *name)
-{
-   unsigned int len, dirlen;
-   char *file;
-#ifndef VMS
-   int requires_fixup;
-#endif
-
-   if (name == NULL)
-     name = "";
-
-   if ((dir == NULL) || (SLpath_is_absolute_path (name)))
-     dir = "";
-
-   /* Both VMS and MSDOS have default directories associated with each drive.
-    * That is, the meaning of something like C:X depends upon more than just
-    * the syntax of the string.  Since this concept has more power under VMS
-    * it will be honored here.  However, I am going to treat C:X as C:\X
-    * under MSDOS.
-    *
-    * Note!!!
-    * VMS has problems of its own regarding path names, so I am simply
-    * going to strcat.  Hopefully the VMS RTL is smart enough to deal with
-    * the result.
-    */
-   dirlen = strlen (dir);
-#ifndef VMS
-   requires_fixup = (dirlen && (0 == IS_PATH_SEP(dir[dirlen - 1])));
-#endif
-
-   len = dirlen + strlen (name) + 2;
-   if (NULL == (file = SLmalloc (len)))
-     return NULL;
-
-   strcpy (file, dir);
-
-#ifndef VMS
-   if (requires_fixup)
-     file[dirlen++] = PATH_SEP;
-#endif
-
-   strcpy (file + dirlen, name);
-
-#if defined(IBMPC_SYSTEM)
-   convert_slashes (file);
-#endif
-
-   return file;
-}
-
-int SLpath_file_exists (char *file)
-{
-   struct stat st;
-   int m;
-
-#if defined(__os2__) && !defined(S_IFMT)
-/* IBM VA3 doesn't declare S_IFMT */
-# define	S_IFMT	(S_IFDIR | S_IFCHR | S_IFREG)
-#endif
-
-#ifdef _S_IFDIR
-# ifndef S_IFDIR
-#  define S_IFDIR _S_IFDIR
-# endif
-#endif
-
-#ifndef S_ISDIR
-# ifdef S_IFDIR
-#  define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-# else
-#  define S_ISDIR(m) 0
-# endif
-#endif
-
-   if (file == NULL)
-     return -1;
-
-   if (stat(file, &st) < 0) return 0;
-   m = st.st_mode;
-
-   if (S_ISDIR(m)) return (2);
-   return 1;
-}
-
-char *SLpath_find_file_in_path (char *path, char *name)
-{
-   unsigned int max_path_len;
-   unsigned int this_path_len;
-   char *file, *dir;
-   char *p;
-   unsigned int nth;
-
-   if ((path == NULL) || (*path == 0)
-       || (name == NULL) || (*name == 0))
-     return NULL;
-
-   max_path_len = 0;
-   this_path_len = 0;
-   p = path;
-   while (*p != 0)
-     {
-	if (*p++ == SEARCH_PATH_DELIMITER)
-	  {
-	     if (this_path_len > max_path_len) max_path_len = this_path_len;
-	     this_path_len = 0;
-	  }
-	else this_path_len++;
-     }
-   if (this_path_len > max_path_len) max_path_len = this_path_len;
-   max_path_len++;
-
-   if (NULL == (dir = SLmalloc (max_path_len)))
-     return NULL;
-
-   nth = 0;
-   while (-1 != SLextract_list_element (path, nth, SEARCH_PATH_DELIMITER,
-					dir, max_path_len))
-     {
-	nth++;
-	if (*dir == 0)
-	  continue;
-
-	if (NULL == (file = SLpath_dircat (dir, name)))
-	  {
-	     SLfree (dir);
-	     return NULL;
-	  }
-
-	if (1 == SLpath_file_exists (file))
-	  {
-	     SLfree (dir);
-	     return file;
-	  }
-
-	SLfree (file);
-     }
-
-   SLfree (dir);
-   return NULL;
-}
-
diff --git a/mdk-stage1/slang/slposdir.c b/mdk-stage1/slang/slposdir.c
deleted file mode 100644
index 33799e574..000000000
--- a/mdk-stage1/slang/slposdir.c
+++ /dev/null
@@ -1,1057 +0,0 @@
-/* file intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_IO_H
-# include <io.h>		       /* for chmod */
-#endif
-
-#if defined(__BORLANDC__)
-# include <process.h>
-# include <dos.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <dir.h>
-#endif
-
-#if defined(_MSC_VER)
-# include <io.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#if defined(VMS)
-# define USE_LISTDIR_INTRINSIC	0
-#else
-# define USE_LISTDIR_INTRINSIC	1
-#endif
-
-#if USE_LISTDIR_INTRINSIC
-
-#if defined(__WIN32__)
-# include <windows.h>
-#else
-# if defined(__OS2__) && defined(__IBMC__)
-#  define INCL_DOS
-#  define INCL_ERRORS
-#  include <os2.h>
-#  include <direct.h>
-#  include <ctype.h>
-# else
-#  ifdef HAVE_DIRENT_H
-#   include <dirent.h>
-#  else
-#   ifdef HAVE_DIRECT_H
-#    include <direct.h>
-#   else
-#    define dirent direct
-#    define NEED_D_NAMLEN
-#    if HAVE_SYS_NDIR_H
-#     include <sys/ndir.h>
-#    endif
-#    if HAVE_SYS_DIR_H
-#     include <sys/dir.h>
-#    endif
-#    if HAVE_NDIR_H
-#     include <ndir.h>
-#    endif
-#   endif
-#  endif
-# endif
-#endif
-
-#endif				       /* USE_LISTDIR_INTRINSIC */
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-static int push_stat_struct (struct stat *st, int opt_attrs)
-{
-   char *field_names [12];
-   unsigned char field_types[12];
-   VOID_STAR field_values [12];
-   int int_values [12];
-   unsigned int i;
-
-   field_names [0] = "st_dev"; int_values [0] = (int) st->st_dev;
-   field_names [1] = "st_ino"; int_values [1] = (int) st->st_ino;
-   field_names [2] = "st_mode"; int_values [2] = (int) st->st_mode;
-   field_names [3] = "st_nlink"; int_values [3] = (int) st->st_nlink;
-   field_names [4] = "st_uid"; int_values [4] = (int) st->st_uid;
-   field_names [5] = "st_gid"; int_values [5] = (int) st->st_gid;
-   field_names [6] = "st_rdev"; int_values [6] = (int) st->st_rdev;
-   field_names [7] = "st_size"; int_values [7] = (int) st->st_size;
-   field_names [8] = "st_atime"; int_values [8] = (int) st->st_atime;
-   field_names [9] = "st_mtime"; int_values [9] = (int) st->st_mtime;
-   field_names [10] = "st_ctime"; int_values [10] = (int) st->st_ctime;
-
-   field_names [11] = "st_opt_attrs"; int_values[11] = opt_attrs;
-
-   for (i = 0; i < 12; i++)
-     {
-	field_types [i] = SLANG_INT_TYPE;
-	field_values [i] = (VOID_STAR) (int_values + i);
-     }
-
-   return SLstruct_create_struct (12, field_names, field_types, field_values);
-}
-
-static void stat_cmd (char *file)
-{
-   struct stat st;
-   int status;
-   int opt_attrs;
-
-   status = stat (file, &st);
-
-#if defined(__MSDOS__) || defined(__WIN32__)
-   if (status == -1)
-     {
-	unsigned int len = strlen (file);
-	if (len && ((file[len-1] == '\\') || (file[len-1] == '/')))
-	  {
-	     file = SLmake_nstring (file, len-1);
-	     if (file == NULL)
-	       return;
-
-	     status = stat (file, &st);
-	     SLfree (file);
-	  }
-     }
-#endif
-   if (status == -1)
-     {
-	_SLerrno_errno = errno;
-	SLang_push_null ();
-	return;
-     }
-
-#ifdef __WIN32__
-   opt_attrs = GetFileAttributes (file);
-#else
-   opt_attrs = 0;
-#endif
-
-   push_stat_struct (&st, opt_attrs);
-}
-
-static void lstat_cmd (char *file)
-{
-#ifdef HAVE_LSTAT
-   struct stat st;
-   int opt_attrs;
-
-   if (-1 == lstat (file, &st))
-     {
-	_SLerrno_errno = errno;
-	SLang_push_null ();
-	return;
-     }
-
-#ifdef __WIN32__
-   opt_attrs = GetFileAttributes (file);
-#else
-   opt_attrs = 0;
-#endif
-   
-   push_stat_struct (&st, opt_attrs);
-#else
-   stat_cmd (file);
-#endif
-}
-
-/* Well, it appears that on some systems, these are not defined.  Here I
- * provide them.  These are derived from the Linux stat.h file.
- */
-
-#ifdef __os2__
-# ifdef __IBMC__
-/* IBM VA3 doesn't declare S_IFMT */
-#  define	S_IFMT	(S_IFDIR | S_IFCHR | S_IFREG)
-# endif
-#endif
-
-#ifndef S_ISLNK
-# ifdef S_IFLNK
-#   define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
-# else
-#   define S_ISLNK(m) 0
-# endif
-#endif
-
-#ifndef S_ISREG
-# ifdef S_IFREG
-#   define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
-# else
-#   define S_ISREG(m) 0
-# endif
-#endif
-
-#ifndef S_ISDIR
-# ifdef S_IFDIR
-#   define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-# else
-#   define S_ISDIR(m) 0
-# endif
-#endif
-
-#ifndef S_ISCHR
-# ifdef S_IFCHR
-#   define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
-# else
-#   define S_ISCHR(m) 0
-# endif
-#endif
-
-#ifndef S_ISBLK
-# ifdef S_IFBLK
-#   define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
-# else
-#   define S_ISBLK(m) 0
-# endif
-#endif
-
-#ifndef S_ISFIFO
-# ifdef S_IFIFO
-#   define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
-# else
-#   define S_ISFIFO(m) 0
-# endif
-#endif
-
-#ifndef S_ISSOCK
-# ifdef S_IFSOCK
-#   define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
-# else
-#   define S_ISSOCK(m) 0
-# endif
-#endif
-
-static char stat_is_cmd (char *what, int *mode_ptr)
-{
-   int ret;
-   int st_mode = *mode_ptr;
-
-   if (!strcmp (what, "sock")) ret = S_ISSOCK(st_mode);
-   else if (!strcmp (what, "fifo")) ret = S_ISFIFO(st_mode);
-   else if (!strcmp (what, "blk")) ret = S_ISBLK(st_mode);
-   else if (!strcmp (what, "chr")) ret = S_ISCHR(st_mode);
-   else if (!strcmp (what, "dir")) ret = S_ISDIR(st_mode);
-   else if (!strcmp (what, "reg")) ret = S_ISREG(st_mode);
-   else if (!strcmp (what, "lnk")) ret = S_ISLNK(st_mode);
-   else
-     {
-	SLang_verror (SL_INVALID_PARM, "stat_is: Unrecognized type: %s", what);
-	return -1;
-     }
-
-   return (char) (ret != 0);
-}
-
-#ifdef HAVE_READLINK
-static void readlink_cmd (char *s)
-{
-   char buf[2048];
-   int n;
-
-   n = readlink (s, buf, sizeof (buf)-1);
-   if (n == -1)
-     {
-	_SLerrno_errno = errno;
-	s = NULL;
-     }
-   else
-     {
-	buf[n] = 0;
-	s = buf;
-     }
-
-   (void) SLang_push_string (s);
-}
-#endif
-
-static int chmod_cmd (char *file, int *mode)
-{
-   if (-1 == chmod(file, (mode_t) *mode))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-   return 0;
-}
-
-#ifdef HAVE_CHOWN
-static int chown_cmd (char *file, int *owner, int *group)
-{
-   int ret;
-
-   if (-1 == (ret = chown(file, (uid_t) *owner, (gid_t) *group)))
-     _SLerrno_errno = errno;
-   return ret;
-}
-#endif
-
-/* add trailing slash to dir */
-static void fixup_dir (char *dir)
-{
-#ifndef VMS
-   int n;
-
-   if ((n = strlen(dir)) > 1)
-     {
-	n--;
-#if defined(IBMPC_SYSTEM)
-      if ( dir[n] != '/' && dir[n] != '\\' )
-      	strcat(dir, "\\" );
-#else
-      if (dir[n] != '/' )
-      	strcat(dir, "/" );
-#endif
-     }
-#endif /* !VMS */
-}
-
-static void slget_cwd (void)
-{
-   char cwd[1024];
-   char *p;
-
-#ifndef HAVE_GETCWD
-   p = getwd (cwd);
-#else
-# if defined (__EMX__)
-   p = _getcwd2(cwd, 1022);	       /* includes drive specifier */
-# else
-   p = getcwd(cwd, 1022);	       /* djggp includes drive specifier */
-# endif
-#endif
-
-   if (p == NULL)
-     {
-	_SLerrno_errno = errno;
-	SLang_push_null ();
-	return;
-     }
-
-#ifndef VMS
-#ifdef __GO32__
-   /* You never know about djgpp since it favors unix */
-     {
-	char ch;
-	p = cwd;
-	while ((ch = *p) != 0)
-	  {
-	     if (ch == '/') *p = '\\';
-	     p++;
-	  }
-     }
-#endif
-   fixup_dir (cwd);
-#endif
-   SLang_push_string (cwd);
-}
-
-static int chdir_cmd (char *s)
-{
-   int ret;
-
-   while (-1 == (ret = chdir (s)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-}
-
-#ifdef VMS
-static int remove_cmd (char *);
-/* If the file looks like xxx, then change it to xxx.dir.  If
- * it looks like A:[B.xxx] then change it to A:[B]xxx.dir.
- */
-
-static char *vms_convert_dirspec_to_vms_dir (char *str)
-{
-   char *s;
-   char *version;
-   unsigned int len;
-   char *dot;
-
-   len = strlen (str);
-
-   version = strchr (str, ';');
-   if (version == NULL)
-     version = str + len;
-   /* version points to the version of the input string */
-
-   
-   if (NULL == (s = SLmalloc (len + 8)))/* allow extra space to work with */
-     return NULL;
-
-   len = (unsigned int) (version - str);
-   strncpy (s, str, len);
-   s[len] = 0;
-   str = s;
-   
-   /* Lowercase the whole thing */
-   while (*s != 0)
-     {
-	*s = LOWER_CASE(*s);
-	s++;
-     }
-
-   if ((s > str)
-       && (s[-1] != ']'))
-     {
-	if ((s >= str + 4)
-	    && (0 == strcmp (s - 4, ".dir")))
-	  s -= 4;
-	goto add_dir_version;
-     }
-
-   /* Check for one of two possibilities:
-    * 
-    *     dev:[x]   --> dev:x
-    *     dev:[a.x] --> dev:[a]x
-    */
-   
-   if (NULL == (dot = strchr (str, '.')))
-     {
-	/* First possibility */
-	if (NULL == (s = strchr (str, '[')))
-	  return str;		       /* let someone else figure this out */
-	while (s[1] != ']')
-	  {
-	     s[0] = s[1];
-	     s++;
-	  }
-	*s = 0;
-	goto add_dir_version;
-     }
-   
-   while (NULL != (s = strchr (dot + 1, '.')))
-     dot = s;
-   
-   *dot = ']';
-   s = str + (len - 1);
-   
-   /* Drop */
-
-   add_dir_version:
-   strcpy (s, ".dir");
-   strcpy (s+4, version);
-   return str;
-}
-#endif
-
-static int rmdir_cmd (char *s)
-{
-#ifdef VMS
-   int status;
-
-   if (NULL == (s = vms_convert_dirspec_to_vms_dir (s)))
-     return -1;
-   
-   status = remove_cmd (s);
-   SLfree (s);
-   
-   return status;
-
-#else
-   int ret;
-
-   while (-1 == (ret = rmdir (s)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-#endif
-}
-
-static int remove_cmd (char *s)
-{
-   int ret;
-#ifdef VMS
-# define REMOVE delete
-#else
-# ifdef REAL_UNIX_SYSTEM
-#  define REMOVE unlink
-# else
-#  define REMOVE remove
-# endif
-#endif
-
-   while (-1 == (ret = REMOVE (s)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-}
-
-static int rename_cmd (char *oldpath, char *newpath)
-{
-   int ret;
-   while (-1 == (ret = rename (oldpath, newpath)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-}
-
-static int mkdir_cmd (char *s, int *mode_ptr)
-{
-   int ret;
-
-   (void) mode_ptr;
-   errno = 0;
-
-#if defined (__MSDOS__) && !defined(__GO32__)
-# define MKDIR(x,y) mkdir(x)
-#else
-# if defined (__os2__) && !defined (__EMX__)
-#  define MKDIR(x,y) mkdir(x)
-# else
-#  if defined (__WIN32__) && !defined (__CYGWIN32__)
-#   define MKDIR(x,y) mkdir(x)
-#  else
-#   define MKDIR mkdir
-#  endif
-# endif
-#endif
-
-   while (-1 == (ret = MKDIR(s, *mode_ptr)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	break;
-     }
-   return ret;
-}
-
-#ifdef HAVE_MKFIFO
-static int mkfifo_cmd (char *path, int *mode)
-{
-   if (-1 == mkfifo (path, *mode))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-   return 0;
-}
-#endif
-
-#if USE_LISTDIR_INTRINSIC
-
-static void free_dir_list (char **list, unsigned int num)
-{
-   unsigned int i;
-
-   if (list == NULL)
-     return;
-
-   for (i = 0; i < num; i++)
-     SLang_free_slstring (list[i]);
-   SLfree ((char *) list);
-}
-
-#if defined(__WIN32__) || defined(__os2__) && defined(__IBMC__)
-static int build_dirlist (char *file, char *opt, char ***listp, unsigned int *nump, unsigned int *maxnum)
-{
-# ifdef __WIN32__
-   DWORD status;
-   HANDLE h;
-   WIN32_FIND_DATA fd;
-# else
-   APIRET rc;
-   FILESTATUS3 status;
-   HDIR h;
-   FILEFINDBUF3 fd;
-   ULONG cFileNames;
-# endif
-   char *pat;
-   unsigned int len;
-   char **list;
-   unsigned int num;
-   unsigned int max_num;
-   int hok;
-
-   /* If an option is present, assume ok to list hidden files.  Later
-    * I will formalize this.
-    */
-   hok = (opt != NULL);
-
-# ifdef __WIN32__
-   status = GetFileAttributes (file);
-# else
-   rc = DosQueryPathInfo(file, FIL_STANDARD, &status, sizeof(FILESTATUS3));
-# endif
-
-
-# ifdef __WIN32__
-   if (status == (DWORD)-1)
-     {
-	_SLerrno_errno = ENOENT;
-	return -1;
-     }
-   if (0 == (status & FILE_ATTRIBUTE_DIRECTORY))
-     {
-	_SLerrno_errno = ENOTDIR;
-	return -1;
-     }
-# else
-   if ((rc != 0) || (status.attrFile & FILE_DIRECTORY) == 0)
-     {
-	/* ENOTDIR isn't defined in VA3. */
-	_SLerrno_errno = ENOENT;
-	return -1;
-     }
-# endif
-
-   len = strlen (file);
-   pat = SLmalloc (len + 3);
-   if (pat == NULL)
-     return -1;
-
-   strcpy (pat, file);
-   file = pat;
-   while (*file != 0)
-     {
-	if (*file == '/') *file = '\\';
-	file++;
-     }
-
-   if (len && (pat[len-1] != '\\'))
-     {
-	pat[len] = '\\';
-	len++;
-     }
-   pat[len++] = '*';
-   pat[len] = 0;
-
-   num = 0;
-   max_num = 50;
-   list = (char **)SLmalloc (max_num * sizeof(char *));
-   if (list == NULL)
-     {
-	SLfree (pat);
-	return -1;
-     }
-
-# ifdef __WIN32__
-   h = FindFirstFile(pat, &fd);
-   if (h == INVALID_HANDLE_VALUE)
-     {
-	if (ERROR_NO_MORE_FILES != GetLastError())
-	  {
-	     SLfree (pat);
-	     SLfree ((char *)list);
-	     return -1;
-	  }
-     }
-# else
-   h = HDIR_CREATE;
-   cFileNames = 1;
-   rc = DosFindFirst(pat, &h, FILE_READONLY | FILE_DIRECTORY |
-		     FILE_ARCHIVED, &fd, sizeof(fd), &cFileNames, FIL_STANDARD);
-   if (rc != 0)
-     {
-	if (rc != ERROR_NO_MORE_FILES)
-	  {
-	     SLfree (pat);
-	     SLfree ((char *)list);
-	     return -1;
-	  }
-     }
-# endif   
-   else while (1)
-     {
-	/* Do not include hidden files in the list.  Also, do not
-	 * include "." and ".." entries.
-	 */
-#ifdef __WIN32__
-	file = fd.cFileName;
-#else
-	file = fd.achName;
-#endif
-	if (
-#ifdef __WIN32__
-	    (hok || (0 == (fd.dwFileAttributes & FILE_ATTRIBUTE_HIDDEN)))
-#else
-	    (hok || (0 == (fd.attrFile & FILE_HIDDEN)))
-#endif
-	    && ((*file != '.')
-		|| ((0 != strcmp (file, "."))
-		    && (0 != strcmp (file, "..")))))
-	  {
-	     if (num == max_num)
-	       {
-		  char **new_list;
-
-		  max_num += 100;
-		  new_list = (char **)SLrealloc ((char *)list, max_num * sizeof (char *));
-		  if (new_list == NULL)
-		    goto return_error;
-
-		  list = new_list;
-	       }
-
-	     file = SLang_create_slstring (file);
-	     if (file == NULL)
-	       goto return_error;
-
-	     list[num] = file;
-	     num++;
-	  }
-
-#ifdef __WIN32__
-	if (FALSE == FindNextFile(h, &fd))
-	  {
-	     if (ERROR_NO_MORE_FILES == GetLastError())
-	       {
-		  FindClose (h);
-		  break;
-	       }
-
-	     _SLerrno_errno = errno;
-	     FindClose (h);
-	     goto return_error;
-	  }
-#else
-        cFileNames = 1;
-        rc = DosFindNext(h, &fd, sizeof(fd), &cFileNames);
-        if (rc != 0)
-	  {
-	     if (rc == ERROR_NO_MORE_FILES)
-	       {
-		  DosFindClose (h);
-		  break;
-	       }
-
-	     _SLerrno_errno = errno;
-	     DosFindClose (h);
-	     goto return_error;
-	  }
-#endif
-     }
-
-   SLfree (pat);
-   *maxnum = max_num;
-   *nump = num;
-   *listp = list;
-   return 0;
-
-   return_error:
-   free_dir_list (list, num);
-   SLfree (pat);
-   return -1;
-}
-
-#else				       /* NOT __WIN32__ */
-
-static int build_dirlist (char *dir, char *opt, char ***listp, unsigned int *nump, unsigned int *maxnum)
-{
-   DIR *dp;
-   struct dirent *ep;
-   unsigned int num_files;
-   unsigned int max_num_files;
-   char **list;
-
-   (void) opt;
-
-   if (NULL == (dp = opendir (dir)))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   num_files = max_num_files = 0;
-   list = NULL;
-   while (NULL != (ep = readdir (dp)))
-     {
-	unsigned int len;
-	char *name;
-
-	name = ep->d_name;
-#  ifdef NEED_D_NAMLEN
-	len = ep->d_namlen;
-#  else
-	len = strlen (name);
-#  endif
-	if ((*name == '.') && (len <= 2))
-	  {
-	     if (len == 1) continue;
-	     if (name [1] == '.') continue;
-	  }
-
-	if (num_files == max_num_files)
-	  {
-	     char **new_list;
-
-	     max_num_files += 100;
-	     if (NULL == (new_list = (char **) SLrealloc ((char *)list, max_num_files * sizeof(char *))))
-	       goto return_error;
-
-	     list = new_list;
-	  }
-
-	if (NULL == (list[num_files] = SLang_create_nslstring (name, len)))
-	  goto return_error;
-
-	num_files++;
-     }
-
-   closedir (dp);
-   *nump = num_files;
-   *maxnum = max_num_files;
-   *listp = list;
-   return 0;
-
-   return_error:
-   if (dp != NULL)
-     closedir (dp);
-   free_dir_list (list, num_files);
-   return -1;
-}
-# endif				       /* NOT __WIN32__ */
-
-static void listdir_cmd (char *dir, char *opt)
-{
-   SLang_Array_Type *at;
-   unsigned int num_files;
-   unsigned int max_num_files;
-   int inum_files;
-   char **list;
-
-   if (-1 == build_dirlist (dir, opt, &list, &num_files, &max_num_files))
-     {
-	SLang_push_null ();
-	return;
-     }
-   /* If max_num_files == 0, then num_files == 0 and list == NULL.  
-    * The realloc step below will malloc list for us.
-    */
-   if (num_files + 1 < max_num_files)
-     {
-	char **new_list;
-	if (NULL == (new_list = (char **) SLrealloc ((char *)list, (num_files + 1)* sizeof(char*))))
-	  {
-	     free_dir_list (list, num_files);
-	     SLang_push_null ();
-	     return;
-	  }
-	list = new_list;
-     }
-
-   inum_files = (int) num_files;
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) list, &inum_files, 1)))
-     {
-	free_dir_list (list, num_files);
-	SLang_push_null ();
-	return;
-     }
-
-   /* Allow the array to free this list if push fails */
-   if (-1 == SLang_push_array (at, 1))
-     SLang_push_null ();
-}
-
-static void listdir_cmd_wrap (void)
-{
-   char *s, *sopt;
-
-   sopt = NULL;
-   switch (SLang_Num_Function_Args)
-     {
-      case 2:
-	if (-1 == SLang_pop_slstring (&sopt))
-	  return;
-      case 1:
-	if (-1 == SLang_pop_slstring (&s))
-	  {
-	     SLang_free_slstring (sopt);
-	     return;
-	  }
-	break;
-      default:
-	SLang_verror (SL_INVALID_PARM, "usage: listdir (string, [opt-string]");
-	return;
-     }
-
-   listdir_cmd (s, sopt);
-   SLang_free_slstring (s);
-   SLang_free_slstring (sopt);
-}
-
-#endif				       /* USE_LISTDIR_INTRINSIC */
-
-#ifdef HAVE_UMASK
-static int umask_cmd (int *u)
-{
-   return umask (*u);
-}
-#endif
-
-static SLang_Intrin_Fun_Type PosixDir_Name_Table [] =
-{
-#ifdef HAVE_READLINK
-   MAKE_INTRINSIC_S("readlink", readlink_cmd, SLANG_VOID_TYPE),
-#endif
-   MAKE_INTRINSIC_S("lstat_file", lstat_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("stat_file", stat_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SI("stat_is", stat_is_cmd, SLANG_CHAR_TYPE),
-#ifdef HAVE_MKFIFO
-   MAKE_INTRINSIC_SI("mkfifo", mkfifo_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_CHOWN
-   MAKE_INTRINSIC_SII("chown", chown_cmd, SLANG_INT_TYPE),
-#endif
-   MAKE_INTRINSIC_SI("chmod", chmod_cmd, SLANG_INT_TYPE),
-#ifdef HAVE_UMASK
-   MAKE_INTRINSIC_I("umask", umask_cmd, SLANG_INT_TYPE),
-#endif
-   MAKE_INTRINSIC_0("getcwd", slget_cwd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SI("mkdir", mkdir_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("chdir", chdir_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("rmdir", rmdir_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("remove", remove_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SS("rename", rename_cmd, SLANG_INT_TYPE),
-#if USE_LISTDIR_INTRINSIC
-   MAKE_INTRINSIC("listdir", listdir_cmd_wrap, SLANG_VOID_TYPE, 0),
-#endif
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-static SLang_IConstant_Type PosixDir_Consts [] =
-{
-#ifndef S_IRWXU
-# define S_IRWXU 00700
-#endif
-   MAKE_ICONSTANT("S_IRWXU", S_IRWXU),
-#ifndef S_IRUSR
-# define S_IRUSR 00400
-#endif
-   MAKE_ICONSTANT("S_IRUSR", S_IRUSR),
-#ifndef S_IWUSR
-# define S_IWUSR 00200
-#endif
-   MAKE_ICONSTANT("S_IWUSR", S_IWUSR),
-#ifndef S_IXUSR
-# define S_IXUSR 00100
-#endif
-   MAKE_ICONSTANT("S_IXUSR", S_IXUSR),
-#ifndef S_IRWXG
-# define S_IRWXG 00070
-#endif
-   MAKE_ICONSTANT("S_IRWXG", S_IRWXG),
-#ifndef S_IRGRP
-# define S_IRGRP 00040
-#endif
-   MAKE_ICONSTANT("S_IRGRP", S_IRGRP),
-#ifndef S_IWGRP
-# define S_IWGRP 00020
-#endif
-   MAKE_ICONSTANT("S_IWGRP", S_IWGRP),
-#ifndef S_IXGRP
-# define S_IXGRP 00010
-#endif
-   MAKE_ICONSTANT("S_IXGRP", S_IXGRP),
-#ifndef S_IRWXO
-# define S_IRWXO 00007
-#endif
-   MAKE_ICONSTANT("S_IRWXO", S_IRWXO),
-#ifndef S_IROTH
-# define S_IROTH 00004
-#endif
-   MAKE_ICONSTANT("S_IROTH", S_IROTH),
-#ifndef S_IWOTH
-# define S_IWOTH 00002
-#endif
-   MAKE_ICONSTANT("S_IWOTH", S_IWOTH),
-#ifndef S_IXOTH
-# define S_IXOTH 00001
-#endif
-   MAKE_ICONSTANT("S_IXOTH", S_IXOTH),
-#ifdef __WIN32__
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_ARCHIVE", FILE_ATTRIBUTE_ARCHIVE),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_COMPRESSED", FILE_ATTRIBUTE_COMPRESSED),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_NORMAL", FILE_ATTRIBUTE_NORMAL),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_DIRECTORY", FILE_ATTRIBUTE_DIRECTORY),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_HIDDEN", FILE_ATTRIBUTE_HIDDEN),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_READONLY", FILE_ATTRIBUTE_READONLY),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_SYSTEM", FILE_ATTRIBUTE_SYSTEM),
-   MAKE_ICONSTANT("FILE_ATTRIBUTE_TEMPORARY", FILE_ATTRIBUTE_TEMPORARY),
-#endif
-   SLANG_END_ICONST_TABLE
-};
-
-static int Initialized;
-
-int SLang_init_posix_dir (void)
-{
-   if (Initialized)
-     return 0;
-
-   if ((-1 == SLadd_intrin_fun_table(PosixDir_Name_Table, "__POSIX_DIR__"))
-       || (-1 == SLadd_iconstant_table (PosixDir_Consts, NULL))
-       || (-1 == _SLerrno_init ()))
-     return -1;
-
-   Initialized = 1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slposio.c b/mdk-stage1/slang/slposio.c
deleted file mode 100644
index ab1e9f689..000000000
--- a/mdk-stage1/slang/slposio.c
+++ /dev/null
@@ -1,568 +0,0 @@
-/* This module implements an interface to posix system calls */
-/* file stdio intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#ifdef HAVE_IO_H
-# include <io.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <dir.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-struct _SLFile_FD_Type
-{
-   char *name;
-   unsigned int num_refs;	       /* reference counting */
-   int fd;
-   SLang_MMT_Type *stdio_mmt;	       /* fdopen'd stdio object */
-
-   /* methods */
-   int (*close)(int);
-   int (*read) (int, char *, unsigned int *);
-   int (*write)(int, char *, unsigned int *);
-};
-
-static int close_method (int fd)
-{
-   return close (fd);
-}
-
-static int write_method (int fd, char *buf, unsigned int *nump)
-{
-   int num;
-
-   if (-1 == (num = write (fd, buf, *nump)))
-     {
-	*nump = 0;
-	return -1;
-     }
-
-   *nump = (unsigned int) num;
-   return 0;
-}
-
-static int read_method (int fd, char *buf, unsigned int *nump)
-{
-   int num;
-
-   num = read (fd, buf, *nump);
-   if (num == -1)
-     {
-	*nump = 0;
-	return -1;
-     }
-   *nump = (unsigned int) num;
-   return 0;
-}
-
-static int check_fd (int fd)
-{
-   if (fd == -1)
-     {
-#ifdef EBADF
-	_SLerrno_errno = EBADF;
-#endif
-	return -1;
-     }
-
-   return 0;
-}
-
-static int posix_close (SLFile_FD_Type *f)
-{
-   if (-1 == check_fd (f->fd))
-     return -1;
-
-   if ((f->close != NULL)
-       && (-1 == f->close (f->fd)))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   if (f->stdio_mmt != NULL)
-     {
-	SLang_free_mmt (f->stdio_mmt);
-	f->stdio_mmt = NULL;
-     }
-
-   f->fd = -1;
-   return 0;
-}
-
-/* Usage: Uint write (f, buf); */
-static void posix_write (SLFile_FD_Type *f, SLang_BString_Type *bstr)
-{
-   unsigned int len;
-   char *p;
-
-   if ((-1 == check_fd (f->fd))
-       || (NULL == (p = (char *)SLbstring_get_pointer (bstr, &len))))
-     {
-	SLang_push_integer (-1);
-	return;
-     }
-
-   if (-1 == f->write (f->fd, p, &len))
-     {
-	_SLerrno_errno = errno;
-	SLang_push_integer (-1);
-	return;
-     }
-
-   (void) SLang_push_uinteger (len);
-}
-
-/* Usage: nn = read (f, &buf, n); */
-static void posix_read (SLFile_FD_Type *f, SLang_Ref_Type *ref, unsigned int *nbytes)
-{
-   unsigned int len;
-   char *b;
-   SLang_BString_Type *bstr;
-
-   b = NULL;
-
-   len = *nbytes;
-   if ((-1 == check_fd (f->fd))
-       || (NULL == (b = SLmalloc (len + 1))))
-     goto return_error;
-   
-   if (-1 == f->read (f->fd, b, &len))
-     {
-	_SLerrno_errno = errno;
-	goto return_error;
-     }
-
-   if (len != *nbytes)
-     {
-	char *b1 = SLrealloc (b, len + 1);
-	if (b1 == NULL)
-	  goto return_error;
-	b = b1;
-     }
-
-   bstr = SLbstring_create_malloced ((unsigned char *) b, len, 0);
-   if (bstr != NULL)
-     {
-	if ((-1 != SLang_assign_to_ref (ref, SLANG_BSTRING_TYPE, (VOID_STAR)&bstr))
-	    && (-1 != SLang_push_uinteger (len)))
-	  return;
-
-	SLbstring_free (bstr);
-	b = NULL;
-	/* drop */
-     }
-   
-   return_error:
-   if (b != NULL) SLfree ((char *)b);
-   (void) SLang_assign_to_ref (ref, SLANG_NULL_TYPE, NULL);
-   (void) SLang_push_integer (-1);
-}
-
-SLFile_FD_Type *SLfile_create_fd (char *name, int fd)
-{
-   SLFile_FD_Type *f;
-
-   if (NULL == (f = (SLFile_FD_Type *) SLmalloc (sizeof (SLFile_FD_Type))))
-     return NULL;
-
-   memset ((char *) f, 0, sizeof (SLFile_FD_Type));
-   if (NULL == (f->name = SLang_create_slstring (name)))
-     {
-	SLfree ((char *)f);
-	return NULL;
-     }
-
-   f->fd = fd;
-   f->num_refs = 1;
-
-   f->close = close_method;
-   f->read = read_method;
-   f->write = write_method;
-
-   return f;
-}
-
-SLFile_FD_Type *SLfile_dup_fd (SLFile_FD_Type *f0)
-{
-   SLFile_FD_Type *f;
-   int fd0, fd;
-
-   if (f0 == NULL)
-     return NULL;
-   fd0 = f0->fd;
-   if (-1 == check_fd (fd0))
-     return NULL;
-
-   while (-1 == (fd = dup (fd0)))
-     {
-#ifdef EINTR
-	if (errno == EINTR)
-	  continue;
-#endif
-	_SLerrno_errno = errno;
-	return NULL;
-     }
-   
-   if (NULL == (f = SLfile_create_fd (f0->name, fd)))
-     {
-	f0->close (fd);
-	return NULL;
-     }
-   
-   return f;
-}
-
-int SLfile_get_fd (SLFile_FD_Type *f, int *fd)
-{
-   if (f == NULL)
-     return -1;
-   
-   *fd = f->fd;
-   if (-1 == check_fd (*fd))
-     return -1;
-
-   return 0;
-}
-
-void SLfile_free_fd (SLFile_FD_Type *f)
-{
-   if (f == NULL)
-     return;
-
-   if (f->num_refs > 1)
-     {
-	f->num_refs -= 1;
-	return;
-     }
-
-   if (f->fd != -1)
-     {
-	if (f->close != NULL)
-	  (void) f->close (f->fd);
-
-	f->fd = -1;
-     }
-
-   if (f->stdio_mmt != NULL)
-     SLang_free_mmt (f->stdio_mmt);
-
-   SLfree ((char *) f);
-}
-
-static int pop_string_int (char **s, int *i)
-{
-   *s = NULL;
-   if ((-1 == SLang_pop_integer (i))
-       || (-1 == SLang_pop_slstring (s)))
-     return -1;
-
-   return 0;
-}
-
-static int pop_string_int_int (char **s, int *a, int *b)
-{
-   *s = NULL;
-   if ((-1 == SLang_pop_integer (b))
-       || (-1 == pop_string_int (s, a)))
-     return -1;
-
-   return 0;
-}
-
-static void posix_open (void)
-{
-   char *file;
-   int mode, flags;
-   SLFile_FD_Type *f;
-
-   switch (SLang_Num_Function_Args)
-     {
-      case 3:
-	if (-1 == pop_string_int_int (&file, &flags, &mode))
-	  {
-	     SLang_push_null ();
-	     return;
-	  }
-	break;
-
-      case 2:
-      default:
-	if (-1 == pop_string_int (&file, &flags))
-	  return;
-	mode = 0777;
-	break;
-     }
-
-   f = SLfile_create_fd (file, -1);
-   if (f == NULL)
-     {
-	SLang_free_slstring (file);
-	SLang_push_null ();
-	return;
-     }
-   SLang_free_slstring (file);
-
-   if (-1 == (f->fd = open (f->name, flags, mode)))
-     {
-	_SLerrno_errno = errno;
-	SLfile_free_fd (f);
-	SLang_push_null ();
-	return;
-     }
-
-   if (-1 == SLfile_push_fd (f))
-     SLang_push_null ();
-   SLfile_free_fd (f);
-}
-
-static void posix_fileno (void)
-{
-   FILE *fp;
-   SLang_MMT_Type *mmt;
-   int fd;
-   SLFile_FD_Type *f;
-   char *name;
-
-   if (-1 == SLang_pop_fileptr (&mmt, &fp))
-     {
-	SLang_push_null ();
-	return;
-     }
-   name = SLang_get_name_from_fileptr (mmt);
-   fd = fileno (fp);
-
-   f = SLfile_create_fd (name, fd);
-   if (f != NULL)
-     f->close = NULL;		       /* prevent fd from being closed 
-					* when it goes out of scope
-					*/
-   SLang_free_mmt (mmt);
-
-   if (-1 == SLfile_push_fd (f))
-     SLang_push_null ();
-   SLfile_free_fd (f);
-}
-
-static void posix_fdopen (SLFile_FD_Type *f, char *mode)
-{
-   if (f->stdio_mmt == NULL)
-     {
-	if (-1 == _SLstdio_fdopen (f->name, f->fd, mode))
-	  return;
-
-	if (NULL == (f->stdio_mmt = SLang_pop_mmt (SLANG_FILE_PTR_TYPE)))
-	  return;
-     }
-
-   (void) SLang_push_mmt (f->stdio_mmt);
-}
-
-static long posix_lseek (SLFile_FD_Type *f, long ofs, int whence)
-{
-   long status;
-   
-   if (-1 == (status = lseek (f->fd, ofs, whence)))
-     _SLerrno_errno = errno;
-   
-   return status;
-}
-
-static int posix_isatty (void)
-{
-   int ret;
-   SLFile_FD_Type *f;
-
-   if (SLang_peek_at_stack () == SLANG_FILE_PTR_TYPE)
-     {
-	SLang_MMT_Type *mmt;
-	FILE *fp;
-
-	if (-1 == SLang_pop_fileptr (&mmt, &fp))
-	  return 0;		       /* invalid descriptor */
-
-	ret = isatty (fileno (fp));
-	SLang_free_mmt (mmt);
-	return ret;
-     }
-
-   if (-1 == SLfile_pop_fd (&f))
-     return 0;
-
-   ret = isatty (f->fd);
-   SLfile_free_fd (f);
-
-   return ret;
-}
-
-static void posix_dup (SLFile_FD_Type *f)
-{
-   if ((NULL == (f = SLfile_dup_fd (f)))
-       || (-1 == SLfile_push_fd (f)))
-     SLang_push_null ();
-   
-   SLfile_free_fd (f);
-}
-	
-#define I SLANG_INT_TYPE
-#define V SLANG_VOID_TYPE
-#define F SLANG_FILE_FD_TYPE
-#define B SLANG_BSTRING_TYPE
-#define R SLANG_REF_TYPE
-#define U SLANG_UINT_TYPE
-#define S SLANG_STRING_TYPE
-#define L SLANG_LONG_TYPE
-static SLang_Intrin_Fun_Type Fd_Name_Table [] =
-{
-   MAKE_INTRINSIC_0("fileno", posix_fileno, V),
-   MAKE_INTRINSIC_0("isatty", posix_isatty, I),
-   MAKE_INTRINSIC_0("open", posix_open, V),
-   MAKE_INTRINSIC_3("read", posix_read, V, F, R, U),
-   MAKE_INTRINSIC_3("lseek", posix_lseek, L, F, L, I),
-   MAKE_INTRINSIC_2("fdopen", posix_fdopen, V, F, S),
-   MAKE_INTRINSIC_2("write", posix_write, V, F, B),
-   MAKE_INTRINSIC_1("dup_fd", posix_dup, V, F),
-   MAKE_INTRINSIC_1("close", posix_close, I, F),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-#undef I
-#undef V
-#undef F
-#undef B
-#undef R
-#undef S
-#undef L
-#undef U
-
-static SLang_IConstant_Type PosixIO_Consts [] =
-{
-#ifdef O_RDONLY
-   MAKE_ICONSTANT("O_RDONLY", O_RDONLY),
-#endif
-#ifdef O_WRONLY
-   MAKE_ICONSTANT("O_WRONLY", O_WRONLY),
-#endif
-#ifdef O_RDWR
-   MAKE_ICONSTANT("O_RDWR", O_RDWR),
-#endif
-#ifdef O_APPEND
-   MAKE_ICONSTANT("O_APPEND", O_APPEND),
-#endif
-#ifdef O_CREAT
-   MAKE_ICONSTANT("O_CREAT", O_CREAT),
-#endif
-#ifdef O_EXCL
-   MAKE_ICONSTANT("O_EXCL", O_EXCL),
-#endif
-#ifdef O_NOCTTY
-   MAKE_ICONSTANT("O_NOCTTY", O_NOCTTY),
-#endif
-#ifdef O_NONBLOCK
-   MAKE_ICONSTANT("O_NONBLOCK", O_NONBLOCK),
-#endif
-#ifdef O_TRUNC
-   MAKE_ICONSTANT("O_TRUNC", O_TRUNC),
-#endif
-#ifndef O_BINARY
-# define O_BINARY 0
-#endif
-   MAKE_ICONSTANT("O_BINARY", O_BINARY),
-#ifndef O_TEXT
-# define O_TEXT 0
-#endif
-   MAKE_ICONSTANT("O_TEXT", O_TEXT),
-
-   SLANG_END_ICONST_TABLE
-};
-
-int SLfile_push_fd (SLFile_FD_Type *f)
-{
-   if (f == NULL)
-     return SLang_push_null ();
-
-   f->num_refs += 1;
-
-   if (0 == SLclass_push_ptr_obj (SLANG_FILE_FD_TYPE, (VOID_STAR) f))
-     return 0;
-
-   f->num_refs -= 1;
-
-   return -1;
-}
-
-int SLfile_pop_fd (SLFile_FD_Type **f)
-{
-   return SLclass_pop_ptr_obj (SLANG_FILE_FD_TYPE, (VOID_STAR *) f);
-}
-
-static void destroy_fd_type (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   SLfile_free_fd (*(SLFile_FD_Type **) ptr);
-}
-
-static int fd_push (unsigned char type, VOID_STAR v)
-{
-   (void) type;
-   return SLfile_push_fd (*(SLFile_FD_Type **)v);
-}
-
-int SLang_init_posix_io (void)
-{
-   SLang_Class_Type *cl;
-
-   if (NULL == (cl = SLclass_allocate_class ("FD_Type")))
-     return -1;
-   cl->cl_destroy = destroy_fd_type;
-   (void) SLclass_set_push_function (cl, fd_push);
-
-   if (-1 == SLclass_register_class (cl, SLANG_FILE_FD_TYPE, sizeof (SLFile_FD_Type), SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   if ((-1 == SLadd_intrin_fun_table(Fd_Name_Table, "__POSIXIO__"))
-       || (-1 == SLadd_iconstant_table (PosixIO_Consts, NULL))
-       || (-1 == _SLerrno_init ()))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slprepr.c b/mdk-stage1/slang/slprepr.c
deleted file mode 100644
index 358eeb874..000000000
--- a/mdk-stage1/slang/slprepr.c
+++ /dev/null
@@ -1,427 +0,0 @@
-/* Copyright (c) 1996, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/*--------------------------------*-C-*---------------------------------*
- * File:	slprepr.c
- *
- * preprocessing routines
- */
-/*{{{ notes: */
-/*
- * various preprocessing tokens supported
- *
- * #ifdef  TOKEN1 TOKEN2 ...
- *	- True if any of TOKEN1 TOKEN2 ... are defined
- *
- * #ifndef TOKEN1 TOKEN2 ...
- *	- True if none of TOKEN1 TOKEN2 ... are defined
- *
- * #iftrue
- * #ifnfalse
- *	- always True
- *
- * #iffalse
- * #ifntrue
- *	- always False
- *
- * #if$ENV
- *	- True if the enviroment variable ENV is set
- *
- * #ifn$ENV
- *	- True if the enviroment variable ENV is not set
- *
- * #if$ENV TOKEN1 TOKEN2 ...
- *	- True if the contents of enviroment variable ENV match
- *	  any of TOKEN1 TOKEN2 ...
- *
- * #ifn$ENV TOKEN1 TOKEN2 ...
- *	- True if the contents of enviroment variable ENV do not match
- *	  any of TOKEN1 TOKEN2 ...
- *
- *	NB: For $ENV, the tokens may contain wildcard characters:
- *		'?' - match any single character
- *		'*' - match any number of characters
- *
- * #elif...
- * #else
- * #endif
- *
- *
- * mj olesen
- *----------------------------------------------------------------------*/
-/*}}}*/
-/*{{{ includes: */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-/*}}}*/
-
-int (*SLprep_exists_hook) (char *, char);
-int (*_SLprep_eval_hook) (char *);
-
-/*{{{ SLprep_open_prep (), SLprep_close_prep () */
-int SLprep_open_prep (SLPreprocess_Type *pt)
-{
-   pt->this_level = 0;
-   pt->exec_level = 0;
-   pt->prev_exec_level = 0;
-   pt->comment_char = '%';
-   pt->preprocess_char = '#';
-   pt->flags = 0;
-   return 0;
-}
-
-void SLprep_close_prep (SLPreprocess_Type *pt)
-{
-   (void) pt;
-}
-/*}}}*/
-
-/*{{{ SLwildcard () */
-/*----------------------------------------------------------------------*
- * Does `string' match `pattern' ?
- *
- * '*' in pattern matches any sub-string (including the null string)
- * '?' matches any single char.
- *
- * Code taken from that donated by Paul Hudson <paulh@harlequin.co.uk>
- * to the fvwm project.
- * It is public domain, no strings attached. No guarantees either.
- *----------------------------------------------------------------------*/
-static int SLwildcard (char *pattern, char *string)
-{
-   if (pattern == NULL || *pattern == '\0' || !strcmp (pattern, "*"))
-     return 1;
-   else if (string == NULL)
-     return 0;
-
-   while (*pattern && *string) switch (*pattern)
-     {
-      case '?':
-	/* match any single character */
-	pattern++;
-	string++;
-	break;
-
-      case '*':
-	/* see if rest of pattern matches any trailing */
-	/* substring of the string. */
-	if (*++pattern == '\0')
-	  return 1;	/* trailing * must match rest */
-
-	while (*string)
-	  {
-	     if (SLwildcard (pattern, string)) return 1;
-	     string++;
-	  }
-	return 0;
-
-	/* break; */
-
-      default:
-	if (*pattern == '\\')
-	  {
-	     if (*++pattern == '\0')
-	       pattern--;	/* don't skip trailing backslash */
-	  }
-	if (*pattern++ != *string++) return 0;
-	break;
-     }
-
-   return ((*string == '\0')
-	   && ((*pattern == '\0') || !strcmp (pattern, "*")));
-}
-/*}}}*/
-
-#if defined(__16_BIT_SYSTEM__)
-# define MAX_DEFINES 10
-#else
-# define MAX_DEFINES 128
-#endif
-
-/* The extra one is for NULL termination */
-char *_SLdefines [MAX_DEFINES + 1];
-
-int SLdefine_for_ifdef (char *s)	/*{{{*/
-{
-   unsigned int i;
-
-   for (i = 0; i < MAX_DEFINES; i++)
-     {
-	char *s1 = _SLdefines [i];
-
-	if (s1 == s)
-	  return 0;		       /* already defined (hashed string) */
-
-	if (s1 != NULL)
-	  continue;
-
-	s = SLang_create_slstring (s);
-	if (s == NULL)
-	  return -1;
-
-	_SLdefines[i] = s;
-	return 0;
-     }
-   return -1;
-}
-/*}}}*/
-
-/*{{{ static functions */
-static int is_any_defined(char *buf, char comment)	/*{{{*/
-{
-   char *sys;
-   unsigned int i;
-
-   while (1)
-     {
-	register char ch;
-
-	/* Skip whitespace */
-	while (((ch = *buf) == ' ') || (ch == '\t'))
-	  buf++;
-
-	if ((ch == '\n') || (ch == 0) || (ch == comment))
-	  return 0;
-
-	i = 0;
-	while (NULL != (sys = _SLdefines [i++]))
-	  {
-	     unsigned int n;
-
-	     if (*sys != ch)
-	       continue;
-
-	     n = strlen (sys);
-	     if (0 == strncmp (buf, sys, n))
-	       {
-		  char ch1 = *(buf + n);
-
-		  if ((ch1 == '\n') || (ch1 == 0) ||
-		      (ch1 == ' ') || (ch1 == '\t') || (ch1 == comment))
-		    return 1;
-	       }
-	  }
-
-	/* Skip past word */
-	while (((ch = *buf) != ' ')
-	       && (ch != '\n')
-	       && (ch != 0)
-	       && (ch != '\t')
-	       && (ch != comment))
-	  buf++;
-     }
-}
-/*}}}*/
-
-static unsigned char *tokenize (unsigned char *buf, char *token, unsigned int len)
-{
-   register char *token_end;
-
-   token_end = token + (len - 1);      /* allow room for \0 */
-
-   while ((token < token_end) && (*buf > ' '))
-     *token++ = *buf++;
-
-   if (*buf > ' ') return NULL;	/* token too long */
-
-   *token = '\0';
-
-   while ((*buf == ' ') || (*buf == '\t')) buf++;
-
-   return buf;
-}
-
-static int is_env_defined (char *buf, char comment)	/*{{{*/
-{
-   char * env, token [32];
-
-   if ((*buf <= ' ') || (*buf == comment)) return 0;	/* no token */
-
-   if (NULL == (buf = (char *) tokenize ((unsigned char *) buf,
-					 token, sizeof (token))))
-     return 0;
-
-   if (NULL == (env = getenv (token)))
-     return 0;		/* ENV not defined */
-
-   if ((*buf == '\0') || (*buf == '\n') || (*buf == comment))
-     return 1;			/* no tokens, but getenv() worked */
-
-   do
-     {
-	buf = (char *) tokenize ((unsigned char *) buf, token, sizeof (token));
-	if (buf == NULL) return 0;
-
-	if (SLwildcard (token, env))
-	  return 1;
-     }
-   while (*buf && (*buf != '\n') && (*buf != comment));
-
-   return 0;
-}
-/*}}}*/
-/*}}}*/
-
-int SLprep_line_ok (char *buf, SLPreprocess_Type *pt)	/*{{{*/
-{
-   int level, prev_exec_level, exec_level;
-
-   if ((buf == NULL) || (pt == NULL)) return 1;
-
-   if (*buf != pt->preprocess_char)
-     {
-	if (pt->this_level != pt->exec_level)
-	  return 0;
-
-	if (*buf == '\n') return pt->flags & SLPREP_BLANK_LINES_OK;
-	if (*buf == pt->comment_char) return pt->flags & SLPREP_COMMENT_LINES_OK;
-
-	return 1;
-     }
-
-   level = pt->this_level;
-   exec_level = pt->exec_level;
-   prev_exec_level = pt->prev_exec_level;
-
-   buf++;
-
-   /* Allow '#!' to pass.  This could be a shell script with something
-    like '#! /local/bin/slang'  */
-   if ((*buf == '!') && (pt->preprocess_char == '#'))
-     return 0;
-
-   /* Allow whitespace as in '#   ifdef'  */
-   while ((*buf == ' ') || (*buf == '\t')) buf++;
-   if (*buf < 'a') return (level == exec_level);
-
-   if (!strncmp(buf, "endif", 5))
-     {
-	if (level == exec_level)
-	  {
-	     exec_level--;
-	     prev_exec_level = exec_level;
-	  }
-	level--;
-	if (level < prev_exec_level) prev_exec_level = level;
-	goto done;
-     }
-
-   if ((buf[0] == 'e') && (buf[1] == 'l'))   /* else, elifdef, ... */
-     {
-	if ((level == exec_level + 1)
-	    && (prev_exec_level != level))
-	  {
-	     /* We are in position to execute */
-	     buf += 2;
-	     if ((buf[0] == 's') && (buf[1] == 'e'))
-	       {
-		  /* "else" */
-		  exec_level = level;
-		  goto done;
-	       }
-
-	     /* drop through to ifdef testing.  First set variable
-	      * to values appropriate for ifdef testing.
-	      */
-	     level--;		       /* now == to exec level */
-	  }
-	else
-	  {
-	     if (level == exec_level)
-	       {
-		  exec_level--;
-	       }
-	     goto done;
-	  }
-     }
-
-   if ((buf[0] == 'i') && (buf[1] == 'f'))
-     {
-	int truth;
-
-	if (level != exec_level)
-	  {
-	     /* Not interested */
-	     level++;
-	     goto done;
-	  }
-
-	level++;
-
-	buf += 2;
-	if (buf[0] == 'n')
-	  {
-	     truth = 0;
-	     buf++;
-	  }
-	else truth = 1;
-
-	if (!strncmp (buf, "def", 3))
-	  truth = (truth == is_any_defined(buf + 3, pt->comment_char));
-
-	else if (!strncmp (buf, "false", 5))
-	  truth = !truth;
-
-	else if (*buf == '$')
-	  truth = (truth == is_env_defined (buf + 1, pt->comment_char));
-
-	else if (!strncmp (buf, "exists", 6)
-		 && (SLprep_exists_hook != NULL))
-	  truth = (truth == (*SLprep_exists_hook)(buf + 6, pt->comment_char));
-
-	else if (!strncmp (buf, "eval", 4)
-		 && (_SLprep_eval_hook != NULL))
-	  truth = (truth == (*_SLprep_eval_hook) (buf + 4));
-			   
-	else if (0 != strncmp (buf, "true", 4))
-	  return 1;		       /* let it bomb */
-
-	if (truth)
-	  {
-	     exec_level = level;
-	     prev_exec_level = exec_level;
-	  }
-     }
-   else return 1;  /* let it bomb. */
-
-   done:
-
-   if (exec_level < 0) return 1;
-
-   pt->this_level = level;
-   pt->exec_level = exec_level;
-   pt->prev_exec_level = prev_exec_level;
-   return 0;
-}
-/*}}}*/
-
-/*{{{ main() - for testing only */
-#if 0
-int main ()
-{
-   char buf[1024];
-   SLPreprocess_Type pt;
-
-   SLprep_open_prep (&pt);
-
-   SLdefine_for_ifdef ("UNIX");
-
-   while (NULL != fgets (buf, sizeof (buf) - 1, stdin))
-     {
-	if (SLprep_line_ok (buf, &pt))
-	  {
-	     fputs (buf, stdout);
-	  }
-     }
-
-   SLprep_close_prep (&pt);
-   return 0;
-}
-#endif
-/*}}}*/
diff --git a/mdk-stage1/slang/slproc.c b/mdk-stage1/slang/slproc.c
deleted file mode 100644
index 8b266f28f..000000000
--- a/mdk-stage1/slang/slproc.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Process specific system calls */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#ifdef HAVE_IO_H
-# include <io.h>		       /* for chmod */
-#endif
-
-#ifdef HAVE_PROCESS_H
-# include <process.h>			/* for getpid */
-#endif
-
-#if defined(__BORLANDC__)
-# include <dos.h>
-#endif
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <signal.h>
-#include <time.h>
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef HAVE_KILL
-static int kill_cmd (int *pid, int *sig)
-{
-   int ret;
-
-   if (-1 == (ret = kill ((pid_t) *pid, *sig)))
-     _SLerrno_errno = errno;
-   return ret;
-}
-#endif
-
-static int getpid_cmd (void)
-{
-   return getpid ();
-}
-
-#ifdef HAVE_GETPPID
-static int getppid_cmd (void)
-{
-   return getppid ();
-}
-#endif
-
-#ifdef HAVE_GETGID
-static int getgid_cmd (void)
-{
-   return getgid ();
-}
-#endif
-
-#ifdef HAVE_GETEGID
-static int getegid_cmd (void)
-{
-   return getegid ();
-}
-#endif
-
-#ifdef HAVE_GETEUID
-static int geteuid_cmd (void)
-{
-   return geteuid ();
-}
-#endif
-
-#ifdef HAVE_GETUID
-static int getuid_cmd (void)
-{
-   return getuid ();
-}
-#endif
-
-#ifdef HAVE_SETGID
-static int setgid_cmd (int *gid)
-{
-   if (0 == setgid (*gid))
-     return 0;
-   _SLerrno_errno = errno;
-   return -1;
-}
-#endif
-
-#ifdef HAVE_SETPGID
-static int setpgid_cmd (int *pid, int *pgid)
-{
-   if (0 == setpgid (*pid, *pgid))
-     return 0;
-   _SLerrno_errno = errno;
-   return -1;
-}
-#endif
-
-#ifdef HAVE_SETUID
-static int setuid_cmd (int *uid)
-{
-   if (0 == setuid (*uid))
-     return 0;
-   _SLerrno_errno = errno;
-   return -1;
-}
-#endif
-
-static SLang_Intrin_Fun_Type Process_Name_Table[] =
-{
-   MAKE_INTRINSIC_0("getpid", getpid_cmd, SLANG_INT_TYPE),
-
-#ifdef HAVE_GETPPID
-   MAKE_INTRINSIC_0("getppid", getppid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETGID
-   MAKE_INTRINSIC_0("getgid", getgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETEGID
-   MAKE_INTRINSIC_0("getegid", getegid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETEUID
-   MAKE_INTRINSIC_0("geteuid", geteuid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_GETUID
-   MAKE_INTRINSIC_0("getuid", getuid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETGID
-   MAKE_INTRINSIC_I("setgid", setgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETPGID
-   MAKE_INTRINSIC_II("setpgid", setpgid_cmd, SLANG_INT_TYPE),
-#endif
-#ifdef HAVE_SETUID
-   MAKE_INTRINSIC_I("setuid", setuid_cmd, SLANG_INT_TYPE),
-#endif
-
-#ifdef HAVE_KILL
-   MAKE_INTRINSIC_II("kill", kill_cmd, SLANG_INT_TYPE),
-#endif
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int SLang_init_posix_process (void)
-{
-   if ((-1 == SLadd_intrin_fun_table (Process_Name_Table, "__POSIX_PROCESS__"))
-       || (-1 == _SLerrno_init ()))
-     return -1;
-   return 0;
-}
diff --git a/mdk-stage1/slang/slregexp.c b/mdk-stage1/slang/slregexp.c
deleted file mode 100644
index 6592a5a63..000000000
--- a/mdk-stage1/slang/slregexp.c
+++ /dev/null
@@ -1,935 +0,0 @@
-/* ed style regular expressions */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define SET_BIT(b, n) b[(unsigned int) (n) >> 3] |= 1 << ((unsigned int) (n) % 8)
-#define TEST_BIT(b, n) (b[(unsigned int)(n) >> 3] & (1 << ((unsigned int) (n) % 8)))
-#define LITERAL 1
-#define RANGE 2			       /* [...] */
-#define ANY 3			       /* . */
-#define BOL 4			       /* ^ */
-#define EOL 5			       /* $ */
-#define NTH_MATCH 6		       /* \1 \2 ... \9 */
-#define OPAREN 7		       /* \( */
-#define CPAREN 0x8		       /* \) */
-#define ANY_DIGIT 0x9		       /* \d */
-#define BOW	0xA		       /* \< */
-#define EOW	0xB		       /* \> */
-#if 0
-#define NOT_LITERAL		0xC	       /* \~ */
-#endif
-#define STAR 0x80		       /* * */
-#define LEAST_ONCE 0x40		       /* + */
-#define MAYBE_ONCE 0x20		       /* ? */
-#define MANY 0x10		       /* {n,m} */
-/* The rest are additions */
-#define YES_CASE (STAR | BOL)
-#define NO_CASE  (STAR | EOL)
-
-#define UPPERCASE(x)  (cs ? (x) : UPPER_CASE(x))
-#define LOWERCASE(x)  (cs ? (x) : LOWER_CASE(x))
-
-static unsigned char Word_Chars[256];
-#define IS_WORD_CHAR(x) Word_Chars[(unsigned int) (x)]
-
-#if 0
-static int ctx->open_paren_number;
-static char Closed_Paren_Matches[10];
-
-static SLRegexp_Type *This_Reg;
-static unsigned char *This_Str;
-#endif
-
-typedef struct
-{
-   SLRegexp_Type *reg;
-   unsigned char *str;
-   unsigned int len;
-   char closed_paren_matches[10];
-   int open_paren_number;
-}
-Re_Context_Type;
-
-static unsigned char *do_nth_match (Re_Context_Type *ctx, int n, unsigned char *str, unsigned char *estr)
-{
-   unsigned char *bpos;
-
-   if (ctx->closed_paren_matches[n] == 0)
-     return NULL;
-
-   bpos = ctx->reg->beg_matches[n] + ctx->str;
-   n = ctx->reg->end_matches[n];
-   if (n == 0) return(str);
-   if (n > (int) (estr - str)) return (NULL);
-
-   /* This needs fixed for case sensitive match */
-   if (0 != strncmp((char *) str, (char *) bpos, (unsigned int) n)) return (NULL);
-   str += n;
-   return (str);
-}
-
-/* returns pointer to the end of regexp or NULL */
-static unsigned char *regexp_looking_at (Re_Context_Type *ctx, register unsigned char *str, unsigned char *estr, unsigned char *buf, register int cs)
-{
-   register unsigned char p, p1;
-   unsigned char *save_str, *tmpstr;
-   int n, n0, n1;
-   int save_num_open;
-   char save_closed_matches[10];
-
-   p = *buf++;
-
-   while (p != 0)
-     {
-	/* p1 = UPPERCASE(*buf); */
-	/* if (str < estr) c = UPPERCASE(*str); */
-
-	switch((unsigned char) p)
-	  {
-	   case BOW:
-	     if ((str != ctx->str)
-		 && ((str >= estr)
-		     || IS_WORD_CHAR(*(str - 1))
-		     || (0 == IS_WORD_CHAR(*str)))) return NULL;
-	     break;
-
-	   case EOW:
-	     if ((str < estr)
-		 && IS_WORD_CHAR (*str)) return NULL;
-	     break;
-
-	   case YES_CASE: cs = 1; break;
-	   case NO_CASE: cs = 0; break;
-
-	   case OPAREN:
-	     ctx->open_paren_number++;
-	     ctx->reg->beg_matches[ctx->open_paren_number] = (int) (str - ctx->str);
-	     break;
-	   case CPAREN:
-	     n = ctx->open_paren_number;
-	     while (n > 0)
-	       {
-		  if (ctx->closed_paren_matches[n] != 0)
-		    {
-		       n--;
-		       continue;
-		    }
-		  ctx->closed_paren_matches[n] = 1;
-		  ctx->reg->end_matches[n] = (unsigned int) (str - (ctx->str + ctx->reg->beg_matches[n]));
-		  break;
-	       }
-	     break;
-#ifdef NOT_LITERAL
-	   case NOT_LITERAL:
-	     if ((str >= estr) || (*buf == UPPERCASE(*str))) return (NULL);
-	     str++; buf++;
-	     break;
-
-	   case MAYBE_ONCE | NOT_LITERAL:
-	     save_str = str;
-	     if ((str < estr) && (*buf != UPPERCASE(*str))) str++;
-	     buf++;
-	     goto match_rest;
-
-	   case NOT_LITERAL | LEAST_ONCE:   /* match at least once */
-	     if ((str >= estr) || (UPPERCASE(*str) == UPPERCASE(*buf))) return (NULL);
-	     str++;
-	     /* drop */
-	   case STAR | NOT_LITERAL:
-	     save_str = str;  p1 = *buf;
-	     while ((str < estr) && (UPPERCASE(*str) != p1)) str++;
-	     buf++;
-	     goto match_rest;
-
-	     /* this type consists of the expression + two bytes that
-	        determine number of matches to perform */
-	   case MANY | NOT_LITERAL:
-	     p1 = *buf; buf++;
-	     n = n0 = (int) (unsigned char) *buf++;
-	     /* minimum number to match--- could be 0 */
-	     n1 = (int) (unsigned char) *buf++;
-	     /* maximum number to match */
-
-	     while (n && (str < estr) && (p1 != *str))
-	       {
-		  n--;
-		  str++;
-	       }
-	     if (n) return (NULL);
-
-	     save_str = str;
-	     n = n1 - n0;
-	     while (n && (str < estr) && (p1 != *str))
-	       {
-		  n--;
-		  str++;
-	       }
-	     goto match_rest;
-#endif				       /* NOT_LITERAL */
-	   case LITERAL:
-	     if ((str >= estr) || (*buf != UPPERCASE(*str))) return (NULL);
-	     str++; buf++;
-	     break;
-
-	   case MAYBE_ONCE | LITERAL:
-	     save_str = str;
-	     if ((str < estr) && (*buf == UPPERCASE(*str))) str++;
-	     buf++;
-	     goto match_rest;
-
-	   case LITERAL | LEAST_ONCE:   /* match at least once */
-	     if ((str >= estr) || (UPPERCASE(*str) != UPPERCASE(*buf))) return (NULL);
-	     str++;
-	     /* drop */
-	   case STAR | LITERAL:
-	     save_str = str;  p1 = *buf;
-	     while ((str < estr) && (UPPERCASE(*str) == p1)) str++;
-	     buf++;
-	     goto match_rest;
-
-	     /* this type consists of the expression + two bytes that
-	        determine number of matches to perform */
-	   case MANY | LITERAL:
-	     p1 = *buf; buf++;
-	     n = n0 = (int) (unsigned char) *buf++;
-	     /* minimum number to match--- could be 0 */
-	     n1 = (int) (unsigned char) *buf++;
-	     /* maximum number to match */
-
-	     while (n && (str < estr) && (p1 == *str))
-	       {
-		  n--;
-		  str++;
-	       }
-	     if (n) return (NULL);
-
-	     save_str = str;
-	     n = n1 - n0;
-	     while (n && (str < estr) && (p1 == *str))
-	       {
-		  n--;
-		  str++;
-	       }
-	     goto match_rest;
-
-	   case NTH_MATCH:
-	     if ((str = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)) == NULL) return(NULL);
-	     buf++;
-	     break;
-
-	   case MAYBE_ONCE | NTH_MATCH:
-	     save_str = str;
-	     tmpstr = do_nth_match (ctx, (int) (unsigned char) *buf, str, estr);
-	     buf++;
-	     if (tmpstr != NULL)
-	       {
-		  str = tmpstr;
-		  goto match_rest;
-	       }
-	     continue;
-
-	   case LEAST_ONCE | NTH_MATCH:
-	     if ((str = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)) == NULL) return(NULL);
-	     /* drop */
-	   case STAR | NTH_MATCH:
-	     save_str = str;
-	     while (NULL != (tmpstr = do_nth_match(ctx, (int) (unsigned char) *buf, str, estr)))
-	       {
-		  str = tmpstr;
-	       }
-	     buf++;
-	     goto match_rest;
-
-	   case MANY | NTH_MATCH: return(NULL);
-	     /* needs done */
-
-	   case RANGE:
-	     if (str >= estr) return (NULL);
-	     if (TEST_BIT(buf, UPPERCASE(*str)) == 0) return (NULL);
-	     buf += 32; str++;
-	     break;
-
-	   case MAYBE_ONCE | RANGE:
-	     save_str = str;
-	     if ((str < estr) && TEST_BIT(buf, UPPERCASE(*str))) str++;
-	     buf += 32;
-	     goto match_rest;
-
-	   case LEAST_ONCE | RANGE:
-	     if ((str >= estr) || (0 == TEST_BIT(buf, UPPERCASE(*str)))) return NULL;
-	     str++;
-	     /* drop */
-	   case STAR | RANGE:
-	     save_str = str;
-	     while ((str < estr) && TEST_BIT(buf, UPPERCASE(*str))) str++;
-	     buf += 32;
-	     goto match_rest;
-
-	     /* The first 32 bytes correspond to the range and the two
-	      * following bytes indicate the min and max number of matches.
-	      */
-	   case MANY | RANGE:
-	     /* minimum number to match--- could be 0 */
-	     n = n0 = (int) (unsigned char) *(buf + 32);
-	     /* maximum number to match */
-	     n1 = (int) (unsigned char) *(buf + 33);
-
-	     while (n && (str < estr) && (TEST_BIT(buf, UPPERCASE(*str))))
-	       {
-		  n--;
-		  str++;
-	       }
-	     if (n) return (NULL);
-	     save_str = str;
-	     n = n1 - n0;
-	     while (n && (str < estr) && (TEST_BIT(buf, UPPERCASE(*str))))
-	       {
-		  n--;
-		  str++;
-	       }
-	     buf += 34;		       /* 32 + 2 */
-	     goto match_rest;
-
-	   case ANY_DIGIT:
-	     if ((str >= estr) || (*str > '9') || (*str < '0')) return (NULL);
-	     str++;
-	     break;
-
-	   case MAYBE_ONCE | ANY_DIGIT:
-	     save_str = str;
-	     if ((str < estr) && ((*str > '9') || (*str < '0'))) str++;
-	     goto match_rest;
-
-	   case LEAST_ONCE | ANY_DIGIT:
-	     if ((str >= estr) || ((*str > '9') || (*str < '0'))) return NULL;
-	     str++;
-	     /* drop */
-	   case STAR | ANY_DIGIT:
-	     save_str = str;
-	     while ((str < estr) && ((*str <= '9') && (*str >= '0'))) str++;
-	     goto match_rest;
-
-	   case MANY | ANY_DIGIT:
-	     /* needs finished */
-	     return (NULL);
-
-	   case ANY:
-	     if ((str >= estr) || (*str == '\n')) return (NULL);
-	     str++;
-	     break;
-
-	   case MAYBE_ONCE | ANY:
-	     save_str = str;
-	     if ((str < estr) && (*str != '\n')) str++;
-	     goto match_rest;
-
-	   case LEAST_ONCE | ANY:
-	     if ((str >= estr) || (*str == '\n')) return (NULL);
-	     str++;
-	     /* drop */
-	   case STAR | ANY:
-	     save_str = str;
-	     while ((str < estr) && (*str != '\n')) str++;
-	     goto match_rest;
-
-	   case MANY | ANY:
-	     return (NULL);
-	     /* needs finished */
-
-	   case EOL:
-	     if ((str >= estr) || (*str == '\n')) return (str);
-	     return(NULL);
-
-	   default: return (NULL);
-	  }
-	p = *buf++;
-	continue;
-
-	match_rest:
-	if (save_str == str)
-	  {
-	     p = *buf++;
-	     continue;
-	  }
-
-	/* if (p == EOL)
-	 * {
-	 * if (str < estr) return (NULL); else return (str);
-	 * }
-	 */
-
-	SLMEMCPY(save_closed_matches, ctx->closed_paren_matches, sizeof(save_closed_matches));
-	save_num_open = ctx->open_paren_number;
-	while (str >= save_str)
-	  {
-	     tmpstr = regexp_looking_at (ctx, str, estr, buf, cs);
-	     if (tmpstr != NULL) return(tmpstr);
-	     SLMEMCPY(ctx->closed_paren_matches, save_closed_matches, sizeof(ctx->closed_paren_matches));
-	     ctx->open_paren_number = save_num_open;
-	     str--;
-	  }
-	return NULL;
-     }
-   if ((p != 0) && (p != EOL)) return (NULL); else return (str);
-}
-
-static void
-fixup_beg_end_matches (Re_Context_Type *ctx, SLRegexp_Type *r, unsigned char *str, unsigned char *epos)
-{
-   int i;
-
-   if (str == NULL)
-     {
-	r->beg_matches[0] = -1;
-	r->end_matches[0] = 0;
-	SLMEMSET(ctx->closed_paren_matches, 0, sizeof(ctx->closed_paren_matches));
-     }
-   else
-     {
-	r->beg_matches[0] = (int) (str - ctx->str);
-	r->end_matches[0] = (unsigned int) (epos - str);
-     }
-
-   for (i = 1; i < 10; i++)
-     {
-	if (ctx->closed_paren_matches [i] == 0)
-	  {
-	     r->beg_matches[i] = -1;
-	     r->end_matches[i] = 0;
-	  }
-     }
-}
-
-static void init_re_context (Re_Context_Type *ctx, SLRegexp_Type *reg, 
-			     unsigned char *str, unsigned int len)
-{
-   memset ((char *) ctx, 0, sizeof (Re_Context_Type));
-   ctx->reg = reg;
-   ctx->str = str;
-   ctx->len = len;
-}
-
-unsigned char *SLang_regexp_match(unsigned char *str,
-				  unsigned int len, SLRegexp_Type *reg)
-{
-   register unsigned char c = 0, *estr = str + len;
-   int cs = reg->case_sensitive, lit = 0;
-   unsigned char *buf = reg->buf, *epos = NULL;
-   Re_Context_Type ctx_buf;
-
-   if (reg->min_length > len) return NULL;
-
-   init_re_context (&ctx_buf, reg, str, len);
-
-   if (*buf == BOL)
-     {
-	if (NULL == (epos = regexp_looking_at (&ctx_buf, str, estr, buf + 1, cs)))
-	  str = NULL;
-
-	fixup_beg_end_matches (&ctx_buf, reg, str, epos);
-	return str;
-     }
-
-   if (*buf == NO_CASE)
-     {
-	buf++;  cs = 0;
-     }
-
-   if (*buf == YES_CASE)
-     {
-	buf++;  cs = 1;
-     }
-
-   if (*buf == LITERAL)
-     {
-	lit = 1;
-	c = *(buf + 1);
-     }
-   else if ((*buf == OPAREN) && (*(buf + 1) == LITERAL))
-     {
-	lit = 1;
-	c = *(buf + 2);
-     }
-
-   while (str < estr)
-     {
-	ctx_buf.open_paren_number = 0;
-	memset (ctx_buf.closed_paren_matches, 0, sizeof(ctx_buf.closed_paren_matches));
-	/* take care of leading chars */
-	if (lit)
-	  {
-	     while ((str < estr) && (c != UPPERCASE(*str))) str++;
-	     if (str >= estr)
-	       break;		       /* failed */
-	  }
-
-	if (NULL != (epos = regexp_looking_at(&ctx_buf, str, estr, buf, cs)))
-	  {
-	     fixup_beg_end_matches (&ctx_buf, reg, str, epos);
-	     return str;
-	  }
-	str++;
-     }
-   fixup_beg_end_matches (&ctx_buf, reg, NULL, epos);
-   return NULL;
-}
-
-static unsigned char *convert_digit(unsigned char *pat, int *nn)
-{
-   int n = 0, m = 0;
-   unsigned char c;
-   while (c = (unsigned char) *pat, (c <= '9') && (c >= '0'))
-     {
-	pat++;
-	n = 10 * n + (c - '0');
-	m++;
-     }
-   if (m == 0)
-     {
-	return (NULL);
-     }
-   *nn = n;
-   return pat;
-}
-
-#define ERROR  return (int) (pat - reg->pat)
-
-/* Returns 0 if successful or offset in pattern of error */
-int SLang_regexp_compile (SLRegexp_Type *reg)
-{
-   register unsigned char *buf, *ebuf, *pat;
-   unsigned char *last = NULL, *tmppat;
-   register unsigned char c;
-   int i, reverse = 0, n, cs;
-   int oparen = 0, nparen = 0;
-   /* substring stuff */
-   int count, last_count, this_max_mm = 0, max_mm = 0, ordinary_search,
-     no_osearch = 0, min_length = 0;
-   unsigned char *mm_p = NULL, *this_mm_p = NULL;
-   static int already_initialized;
-
-   reg->beg_matches[0] = reg->end_matches[0] = 0;
-   buf = reg->buf;
-   ebuf = (reg->buf + reg->buf_len) - 2; /* make some room */
-   pat = reg->pat;
-   cs = reg->case_sensitive;
-
-   if (already_initialized == 0)
-     {
-	SLang_init_case_tables ();
-#ifdef IBMPC_SYSTEM
-	SLmake_lut (Word_Chars, (unsigned char *) "_0-9a-zA-Z\200-\232\240-\245\341-\353", 0);
-#else
-	SLmake_lut (Word_Chars, (unsigned char *) "_0-9a-zA-Z\277-\326\330-\336\340-\366\370-\376", 0);
-#endif
-	already_initialized = 1;
-     }
-
-   i = 1; while (i < 10)
-     {
-	reg->beg_matches[i] = -1;
-	reg->end_matches[i] = 0;
-	i++;
-     }
-
-   if (*pat == '\\')
-     {
-	if (pat[1] == 'c')
-	  {
-	     cs = 1;
-	     pat += 2;
-	     no_osearch = 1;
-	  }
-	else if (pat[1] == 'C')
-	  {
-	     cs = 0;
-	     pat += 2;
-	     no_osearch = 1;
-	  }
-     }
-
-   if (*pat == '^')
-     {
-	pat++;
-	*buf++ = BOL;
-	reg->must_match_bol = 1;
-     }
-   else reg->must_match_bol = 0;
-
-   if (cs != reg->case_sensitive)
-     {
-	if (cs) *buf++ = YES_CASE; 
-	else *buf++ = NO_CASE; 
-     }
-
-   *buf = 0;
-
-   last_count = count = 0;
-   while ((c = *pat++) != 0)
-     {
-	if (buf >= ebuf - 3)
-	  {
-	     SLang_doerror ("Pattern too large to be compiled.");
-	     ERROR;
-	  }
-
-	count++;
-	switch (c)
-	  {
-	   case '$':
-	     if (*pat != 0) goto literal_char;
-	     *buf++ = EOL;
-	     break;
-
-	   case '\\':
-	     c = *pat++;
-	     no_osearch = 1;
-	     switch(c)
-	       {
-		case 'e': c = 033; goto literal_char;
-		case 'n': c = '\n'; goto literal_char;
-		case 't': c = '\t'; goto literal_char;
-		case 'C': cs = 0; *buf++ = NO_CASE; break;
-		case 'c': cs = 1; *buf++ = YES_CASE; break;
-		case '1': case '2': case '3':  case '4':  case '5':
-		case '6': case '7': case '8':  case '9':
-		  c = c - '0';
-		  if ((int) c > nparen) ERROR;
-		  last = buf;
-		  *buf++ = NTH_MATCH; *buf++ = c;
-		  break;
-#ifdef NOT_LITERAL
-		case '~':	       /* slang extension */
-		  if ((c = *pat) == 0) ERROR;
-		  pat++;
-		  last = buf;
-		  *buf++ = NOT_LITERAL;
-		  *buf++ = c;
-		  min_length++;
-		  break;
-#endif
-		case 'd':	       /* slang extension */
-		  last = buf;
-		  *buf++ = ANY_DIGIT;
-		  min_length++;
-		  break;
-
-		case '<':
-		  last = NULL;
-		  *buf++ = BOW;
-		  break;
-
-		case '>':
-		  last = NULL;
-		  *buf++ = EOW;
-		  break;
-
-		case '{':
-		  if (last == NULL) goto literal_char;
-		  *last |= MANY;
-		  tmppat = convert_digit(pat, &n);
-		  if (tmppat == NULL) ERROR;
-		  pat = tmppat;
-		  *buf++ = n;
-
-		  min_length += (n - 1);
-
-		  if (*pat == '\\')
-		    {
-		       *buf++ = n;
-		    }
-		  else if (*pat == ',')
-		    {
-		       pat++;
-		       if (*pat == '\\')
-			 {
-			    n = 255;
-			 }
-		       else
-			 {
-			    tmppat = convert_digit(pat, &n);
-			    if (tmppat == NULL) ERROR;
-			    pat = tmppat;
-			    if (*pat != '\\') ERROR;
-			 }
-		       *buf++ = n;
-		    }
-		  else ERROR;
-		  last = NULL;
-		  pat++;
-		  if (*pat != '}') ERROR;
-		  pat++;
-		  break;   /* case '{' */
-
-		case '(':
-		  oparen++;
-		  if (oparen > 9) ERROR;
-		  *buf++ = OPAREN;
-		  break;
-		case ')':
-		  if (oparen == 0) ERROR;
-		  oparen--;
-		  nparen++;
-		  *buf++ = CPAREN;
-		  break;
-
-		case 0: ERROR;
-		default:
-		  goto literal_char;
-	       }
-	     break;
-
-	   case '[':
-
-	     *buf = RANGE;
-	     last = buf++;
-
-	     if (buf + 32 >= ebuf) ERROR;
-
-	     for (i = 0; i < 32; i++) buf[i] = 0;
-	     c = *pat++;
-	     if (c == '^')
-	       {
-		  reverse = 1;
-		  SET_BIT(buf, '\n');
-		  c = *pat++;
-	       }
-
-	     if (c == ']')
-	       {
-		  SET_BIT(buf, c);
-		  c = *pat++;
-	       }
-	     while (c && (c != ']'))
-	       {
-		  if (c == '\\')
-		    {
-		       c = *pat++;
-		       switch(c)
-			 {
-			    case 'n': c = '\n'; break;
-			    case 't': c = '\t'; break;
-			    case 0: ERROR;
-			 }
-		    }
-
-		  if (*pat == '-')
-		    {
-		       pat++;
-		       while (c < *pat)
-			 {
-			    if (cs == 0)
-			      {
-				 SET_BIT(buf, UPPERCASE(c));
-				 SET_BIT(buf, LOWERCASE(c));
-			      }
-			    else SET_BIT(buf, c);
-			    c++;
-			 }
-		    }
-		  if (cs == 0)
-		    {
-		       SET_BIT(buf, UPPERCASE(c));
-		       SET_BIT(buf, LOWERCASE(c));
-		    }
-		  else SET_BIT(buf, c);
-		  c = *pat++;
-	       }
-	     if (c != ']') ERROR;
-	     if (reverse) for (i = 0; i < 32; i++) buf[i] = buf[i] ^ 0xFF;
-	     reverse = 0;
-	     buf += 32;
-	     min_length++;
-	     break;
-
-	   case '.':
-	     last = buf;
-	     *buf++ = ANY;
-	     min_length++;
-	     break;
-
-	   case '*':
-	     if (last == NULL) goto literal_char;
-	     *last |= STAR;
-	     min_length--;
-	     last = NULL;
-	     break;
-
-	   case '+':
-	     if (last == NULL) goto literal_char;
-	     *last |= LEAST_ONCE;
-	     last = NULL;
-	     break;
-
-	   case '?':
-	     if (last == NULL) goto literal_char;
-	     *last |= MAYBE_ONCE;
-	     last = NULL;
-	     min_length--;
-	     break;
-
-	   literal_char:
-	   default:
-	     /* This is to keep track of longest substring */
-	     min_length++;
-	     this_max_mm++;
-	     if (last_count + 1 == count)
-	       {
-		  if (this_max_mm == 1)
-		    {
-		       this_mm_p = buf;
-		    }
-		  else if (max_mm < this_max_mm)
-		    {
-		       mm_p = this_mm_p;
-		       max_mm = this_max_mm;
-		    }
-	       }
-	     else
-	       {
-		  this_mm_p = buf;
-		  this_max_mm = 1;
-	       }
-
-	     last_count = count;
-
-	     last = buf;
-	     *buf++ = LITERAL;
-	     *buf++ = UPPERCASE(c);
-	  }
-     }
-   *buf = 0;
-   /* Check for ordinary search */
-   ebuf = buf;
-   buf = reg->buf;
-
-   if (no_osearch) ordinary_search = 0;
-   else
-     {
-	ordinary_search = 1;
-	while (buf < ebuf)
-	  {
-	     if (*buf != LITERAL)
-	       {
-		  ordinary_search = 0;
-		  break;
-	       }
-	     buf += 2;
-	  }
-     }
-
-   reg->osearch = ordinary_search;
-   reg->must_match_str[15] = 0;
-   reg->min_length = (min_length > 0) ? (unsigned int) min_length : 0;
-   if (ordinary_search)
-     {
-	strncpy((char *) reg->must_match_str, (char *) reg->pat, 15);
-	reg->must_match = 1;
-	return(0);
-     }
-   /* check for longest substring of pattern */
-   reg->must_match = 0;
-   if ((mm_p == NULL) && (this_mm_p != NULL)) mm_p = this_mm_p;
-   if (mm_p == NULL)
-     {
-	return (0);
-     }
-   n = 15;
-   pat = reg->must_match_str;
-   buf = mm_p;
-   while (n--)
-     {
-	if (*buf++ != LITERAL) break;
-	*pat++ = *buf++;
-     }
-   *pat = 0;
-   if (pat != reg->must_match_str) reg->must_match = 1;
-   return(0);
-}
-
-char *SLregexp_quote_string (char *re, char *buf, unsigned int buflen)
-{
-   char ch;
-   char *b, *bmax;
-
-   if (re == NULL) return NULL;
-
-   b = buf;
-   bmax = buf + buflen;
-
-   while (b < bmax)
-     {
-	switch (ch = *re++)
-	  {
-	   case 0:
-	     *b = 0;
-	     return buf;
-
-	   case '$':
-	   case '\\':
-	   case '[':
-	   case ']':
-	   case '.':
-	   case '^':
-	   case '*':
-	   case '+':
-	   case '?':
-	     *b++ = '\\';
-	    if (b == bmax) break;
-	     /* drop */
-
-	   default:
-	     *b++ = ch;
-	  }
-     }
-   return NULL;
-}
-
-#if 0
-#define MAX_EXP 4096
-int main(int argc, char **argv)
-{
-   FILE *fp;
-   char *regexp, *file;
-   char expbuf[MAX_EXP], buf[512];
-   SLRegexp_Type reg;
-
-   file = argv[2];
-   regexp = argv[1];
-
-   if (NULL == (fp = fopen(file, "r")))
-     {
-	fprintf(stderr, "File not open\n");
-	return(1);
-     }
-
-   reg.buf = expbuf;
-   reg.buf_len = MAX_EXP;
-   reg.pat = regexp;
-   reg.case_sensitive = 1;
-
-   if (!regexp_compile(&reg)) while (NULL != fgets(buf, 511, fp))
-     {
-	if (reg.osearch)
-	  {
-	     if (NULL == strstr(buf, reg.pat)) continue;
-	  }
-	else
-	  {
-	     if (reg.must_match && (NULL == strstr(buf, reg.must_match_str))) continue;
-	     if (0 == regexp_match(buf, buf + strlen(buf), &reg)) continue;
-	  }
-
-	fputs(buf, stdout);
-     }
-   return (0);
-}
-#endif
diff --git a/mdk-stage1/slang/slrline.c b/mdk-stage1/slang/slrline.c
deleted file mode 100644
index 1874be0bb..000000000
--- a/mdk-stage1/slang/slrline.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/* SLang_read_line interface --- uses SLang tty stuff */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef REAL_UNIX_SYSTEM
-int SLang_RL_EOF_Char = 4;
-#else
-int SLang_RL_EOF_Char = 26;
-#endif
-
-int SLang_Rline_Quit;
-static SLang_RLine_Info_Type *This_RLI;
-
-static unsigned char Char_Widths[256];
-static void position_cursor (int);
-
-static void rl_beep (void)
-{
-   putc(7, stdout);
-   fflush (stdout);
-}
-
-/* editing functions */
-static int rl_bol (void)
-{
-   if (This_RLI->point == 0) return 0;
-   This_RLI->point = 0;
-   return 1;
-}
-
-static int rl_eol (void)
-{
-   if (This_RLI->point == This_RLI->len) return 0;
-   This_RLI->point = This_RLI->len;
-   return 1;
-}
-
-static int rl_right (void)
-{
-   if (This_RLI->point == This_RLI->len) return 0;
-   This_RLI->point++;
-   return 1;
-}
-
-static int rl_left (void)
-{
-   if (This_RLI->point == 0) return 0;
-   This_RLI->point--;
-   return 1;
-}
-
-static int rl_self_insert (void)
-{
-   unsigned char *pmin, *p;
-
-   if (This_RLI->len == This_RLI->buf_len)
-     {
-	rl_beep ();
-	return 0;
-     }
-
-   pmin = This_RLI->buf + This_RLI->point;
-   p = This_RLI->buf + This_RLI->len;
-   while (p > pmin)
-     {
-	*p = *(p - 1);
-	p--;
-     }
-   *pmin = SLang_Last_Key_Char;
-
-   This_RLI->len++;
-   This_RLI->point++;
-   if ((This_RLI->curs_pos + 2 >= This_RLI->edit_width)
-       || (This_RLI->tt_insert == NULL)
-       || (Char_Widths[SLang_Last_Key_Char] != 1)) return 1;
-
-   (*This_RLI->tt_insert)((char) SLang_Last_Key_Char);
-   /* update screen buf */
-   p = This_RLI->old_upd + (This_RLI->len - 1);
-   pmin = This_RLI->old_upd + (This_RLI->point - 1);
-   while (p > pmin)
-     {
-	*p = *(p - 1);
-	p--;
-     }
-   *pmin = SLang_Last_Key_Char;
-   return 0;
-}
-
-int SLang_rline_insert (char *s)
-{
-   unsigned char *pmin, *p;
-   int n;
-
-   n = strlen (s);
-   if (n > This_RLI->buf_len - This_RLI->len)
-     n = This_RLI->buf_len - This_RLI->len;
-
-   if (n == 0) return 0;
-
-   pmin = This_RLI->buf + This_RLI->point;
-   p = This_RLI->buf + (This_RLI->len - 1);
-
-   while (p >= pmin)
-     {
-	*(p + n) = *p;
-	p--;
-     }
-   SLMEMCPY ((char *) pmin, s, n);
-
-   This_RLI->len += n;
-   This_RLI->point += n;
-   return n;
-}
-
-static int rl_deln (int n)
-{
-   unsigned char *pmax, *p;
-
-   p = This_RLI->buf + This_RLI->point;
-   pmax = This_RLI->buf + This_RLI->len;
-
-   if (p + n > pmax) n = (int) (pmax - p);
-   while (p < pmax)
-     {
-	*p = *(p + n);
-	p++;
-     }
-   This_RLI->len -= n;
-   return n;
-}
-
-static int rl_del (void)
-{
-   return rl_deln(1);
-}
-
-static int rl_quote_insert (void)
-{
-   int err = SLang_Error;
-   SLang_Error = 0;
-   SLang_Last_Key_Char = (*This_RLI->getkey)();
-   rl_self_insert ();
-   if (SLang_Error == SL_USER_BREAK) SLang_Error = 0;
-   else SLang_Error = err;
-   return 1;
-}
-
-static int rl_trim (void)
-{
-   unsigned char *p, *pmax, *p1;
-   p = This_RLI->buf + This_RLI->point;
-   pmax = This_RLI->buf + This_RLI->len;
-
-   if (p == pmax)
-     {
-	if (p == This_RLI->buf) return 0;
-	p--;
-     }
-
-   if ((*p != ' ') && (*p != '\t')) return 0;
-   p1 = p;
-   while ((p1 < pmax) && ((*p1 == ' ') || (*p1 == '\t'))) p1++;
-   pmax = p1;
-   p1 = This_RLI->buf;
-
-   while ((p >= p1) && ((*p == ' ') || (*p == '\t'))) p--;
-   if (p == pmax) return 0;
-   p++;
-
-   This_RLI->point = (int) (p - p1);
-   return rl_deln ((int) (pmax - p));
-}
-
-static int rl_bdel (void)
-{
-   if (rl_left()) return rl_del();
-   return 0;
-}
-
-static int rl_deleol (void)
-{
-   if (This_RLI->point == This_RLI->len) return 0;
-   *(This_RLI->buf + This_RLI->point) = 0;
-   This_RLI->len = This_RLI->point;
-   return 1;
-}
-
-static int rl_delete_line (void)
-{
-   This_RLI->point = 0;
-   *(This_RLI->buf + This_RLI->point) = 0;
-   This_RLI->len = 0;
-   return 1;
-}
-
-static int rl_enter (void)
-{
-   *(This_RLI->buf + This_RLI->len) = 0;
-   SLang_Rline_Quit = 1;
-   return 1;
-}
-
-static SLKeyMap_List_Type *RL_Keymap;
-
-/* This update is designed for dumb terminals.  It assumes only that the
- * terminal can backspace via ^H, and move cursor to start of line via ^M.
- * There is a hook so the user can provide a more sophisticated update if
- * necessary.
- */
-
-static void position_cursor (int col)
-{
-   unsigned char *p, *pmax;
-   int dc;
-
-   if (col == This_RLI->curs_pos)
-     {
-	fflush (stdout);
-	return;
-     }
-
-   if (This_RLI->tt_goto_column != NULL)
-     {
-	(*This_RLI->tt_goto_column)(col);
-	This_RLI->curs_pos = col;
-	fflush (stdout);
-	return;
-     }
-
-   dc = This_RLI->curs_pos - col;
-   if (dc < 0)
-     {
-	p = This_RLI->new_upd + This_RLI->curs_pos;
-	pmax = This_RLI->new_upd + col;
-	while (p < pmax) putc((char) *p++, stdout);
-     }
-   else
-     {
-	if (dc < col)
-	  {
-	     while (dc--) putc(8, stdout);
-	  }
-	else
-	  {
-	     putc('\r', stdout);
-	     p = This_RLI->new_upd;
-	     pmax = This_RLI->new_upd + col;
-	     while (p < pmax) putc((char) *p++, stdout);
-	  }
-     }
-   This_RLI->curs_pos = col;
-   fflush (stdout);
-}
-
-static void erase_eol (SLang_RLine_Info_Type *rli)
-{
-   unsigned char *p, *pmax;
-
-   p = rli->old_upd + rli->curs_pos;
-   pmax = rli->old_upd + rli->old_upd_len;
-
-   while (p++ < pmax) putc(' ', stdout);
-
-   rli->curs_pos = rli->old_upd_len;
-}
-
-static unsigned char *spit_out(SLang_RLine_Info_Type *rli, unsigned char *p)
-{
-   unsigned char *pmax;
-   position_cursor ((int) (p - rli->new_upd));
-   pmax = rli->new_upd + rli->new_upd_len;
-   while (p < pmax) putc((char) *p++, stdout);
-   rli->curs_pos = rli->new_upd_len;
-   return pmax;
-}
-
-static void really_update (SLang_RLine_Info_Type *rli, int new_curs_position)
-{
-   unsigned char *b = rli->old_upd, *p = rli->new_upd, chb, chp;
-   unsigned char *pmax;
-
-   if (rli->update_hook != NULL)
-     {
-	(*rli->update_hook)(p, rli->edit_width, new_curs_position);
-     }
-   else
-     {
-	pmax = p + rli->edit_width;
-	while (p < pmax)
-	  {
-	     chb = *b++; chp = *p++;
-	     if (chb == chp) continue;
-
-	     if (rli->old_upd_len <= rli->new_upd_len)
-	       {
-		  /* easy one */
-		  (void) spit_out (rli, p - 1);
-		  break;
-	       }
-	     spit_out(rli, p - 1);
-	     erase_eol (rli);
-	     break;
-	  }
-	position_cursor (new_curs_position);
-     }
-
-   /* update finished, so swap */
-
-   rli->old_upd_len = rli->new_upd_len;
-   p = rli->old_upd;
-   rli->old_upd = rli->new_upd;
-   rli->new_upd = p;
-}
-
-static void RLupdate (SLang_RLine_Info_Type *rli)
-{
-   int len, dlen, start_len = 0, prompt_len = 0, tw = 0, count;
-   int want_cursor_pos;
-   unsigned char *b, chb, *b_point, *p;
-   int no_echo;
-
-   no_echo = rli->flags & SL_RLINE_NO_ECHO;
-
-   b_point = (unsigned char *) (rli->buf + rli->point);
-   *(rli->buf + rli->len) = 0;
-
-   /* expand characters for output buffer --- handle prompt first.
-    * Do two passes --- first to find out where to begin upon horiz
-    * scroll and the second to actually fill the buffer. */
-   len = 0;
-   count = 2;			       /* once for prompt and once for buf */
-
-   b = (unsigned char *) rli->prompt;
-   while (count--)
-     {
-	if ((count == 0) && no_echo)
-	  break;
-
-	/* The prompt could be NULL */
-	if (b != NULL) while ((chb = *b) != 0)
-	  {
-	     /* This will ensure that the screen is scrolled a third of the edit
-	      * width each time */
-	     if (b_point == b) break;
-	     dlen = Char_Widths[chb];
-	     if ((chb == '\t') && tw)
-	       {
-		  dlen = tw * ((len - prompt_len) / tw + 1) - (len - prompt_len);
-	       }
-	     len += dlen;
-	     b++;
-	  }
-	tw = rli->tab;
-	b = (unsigned char *) rli->buf;
-	if (count == 1) want_cursor_pos = prompt_len = len;
-     }
-
-   if (len < rli->edit_width - rli->dhscroll) start_len = 0;
-   else if ((rli->start_column > len)
-	    || (rli->start_column + rli->edit_width <= len))
-     {
-	start_len = len - (rli->edit_width - rli->dhscroll);
-	if (start_len < 0) start_len = 0;
-     }
-   else start_len = rli->start_column;
-   rli->start_column = start_len;
-
-   want_cursor_pos = len - start_len;
-
-   /* second pass */
-   p = rli->new_upd;
-
-   len = 0;
-   count = 2;
-   b = (unsigned char *) rli->prompt;
-   if (b == NULL) b = (unsigned char *) "";
-
-   while ((len < start_len) && (*b))
-     {
-	len += Char_Widths[*b++];
-     }
-
-   tw = 0;
-   if (*b == 0)
-     {
-	b = (unsigned char *) rli->buf;
-	while (len < start_len)
-	  {
-	     len += Char_Widths[*b++];
-	  }
-	tw = rli->tab;
-	count--;
-     }
-
-   len = 0;
-   while (count--)
-     {
-	if ((count == 0) && (no_echo))
-	  break;
-
-	while ((len < rli->edit_width) && ((chb = *b++) != 0))
-	  {
-	     dlen = Char_Widths[chb];
-	     if (dlen == 1) *p++ = chb;
-	     else
-	       {
-		  if ((chb == '\t') && tw)
-		    {
-		       dlen = tw * ((len + start_len - prompt_len) / tw + 1) - (len + start_len - prompt_len);
-		       len += dlen;	       /* ok since dlen comes out 0  */
-		       if (len > rli->edit_width) dlen = len - rli->edit_width;
-		       while (dlen--) *p++ = ' ';
-		       dlen = 0;
-		    }
-		  else
-		    {
-		       if (dlen == 3)
-			 {
-			    chb &= 0x7F;
-			    *p++ = '~';
-			 }
-
-		       *p++ = '^';
-		       if (chb == 127)  *p++ = '?';
-		       else *p++ = chb + '@';
-		    }
-	       }
-	     len += dlen;
-	  }
-	/* if (start_len > prompt_len) break; */
-	tw = rli->tab;
-	b = (unsigned char *) rli->buf;
-     }
-
-   rli->new_upd_len = (int) (p - rli->new_upd);
-   while (p < rli->new_upd + rli->edit_width) *p++ = ' ';
-   really_update (rli, want_cursor_pos);
-}
-
-void SLrline_redraw (SLang_RLine_Info_Type *rli)
-{
-   unsigned char *p = rli->new_upd;
-   unsigned char *pmax = p + rli->edit_width;
-   while (p < pmax) *p++ = ' ';
-   rli->new_upd_len = rli->edit_width;
-   really_update (rli, 0);
-   RLupdate (rli);
-}
-
-static int rl_eof_insert (void)
-{
-   if (This_RLI->len == 0)
-     {
-	SLang_Last_Key_Char = SLang_RL_EOF_Char;
-	/* rl_self_insert (); */
-	return rl_enter ();
-     }
-   return 0;
-}
-
-/* This is very naive.  It knows very little about nesting and nothing
- * about quoting.
- */
-static void blink_match (SLang_RLine_Info_Type *rli)
-{
-   unsigned char bra, ket;
-   unsigned int delta_column;
-   unsigned char *p, *pmin;
-   int dq_level, sq_level;
-   int level;
-
-   pmin = rli->buf;
-   p = pmin + rli->point;
-   if (pmin == p)
-     return;
-
-   ket = SLang_Last_Key_Char;
-   switch (ket)
-     {
-      case ')':
-	bra = '(';
-	break;
-      case ']':
-	bra = '[';
-	break;
-      case '}':
-	bra = '{';
-	break;
-      default:
-	return;
-     }
-
-   level = 0;
-   sq_level = dq_level = 0;
-
-   delta_column = 0;
-   while (p > pmin)
-     {
-	char ch;
-
-	p--;
-	delta_column++;
-	ch = *p;
-
-	if (ch == ket)
-	  {
-	     if ((dq_level == 0) && (sq_level == 0))
-	       level++;
-	  }
-	else if (ch == bra)
-	  {
-	     if ((dq_level != 0) || (sq_level != 0))
-	       continue;
-
-	     level--;
-	     if (level == 0)
-	       {
-		  rli->point -= delta_column;
-		  RLupdate (rli);
-		  (*rli->input_pending)(10);
-		  rli->point += delta_column;
-		  RLupdate (rli);
-		  break;
-	       }
-	     if (level < 0)
-	       break;
-	  }
-	else if (ch == '"') dq_level = !dq_level;
-	else if (ch == '\'') sq_level = !sq_level;
-     }
-}
-
-int SLang_read_line (SLang_RLine_Info_Type *rli)
-{
-   unsigned char *p, *pmax;
-   SLang_Key_Type *key;
-
-   SLang_Rline_Quit = 0;
-   This_RLI = rli;
-   p = rli->old_upd; pmax = p + rli->edit_width;
-   while (p < pmax) *p++ = ' ';
-
-   /* Sanity checking */
-   rli->len = strlen ((char *) rli->buf);
-   if (rli->len >= rli->buf_len)
-     {
-	rli->len = 0;
-	*rli->buf = 0;
-     }
-   if (rli->point > rli->len) rli->point = rli->len;
-   if (rli->point < 0) rli->point = 0;
-
-   rli->curs_pos = rli->start_column = 0;
-   rli->new_upd_len = rli->old_upd_len = 0;
-
-   This_RLI->last_fun = NULL;
-   if (rli->update_hook == NULL)
-     putc ('\r', stdout);
-
-   RLupdate (rli);
-
-   while (1)
-     {
-	key = SLang_do_key (RL_Keymap, (int (*)(void)) rli->getkey);
-
-	if ((key == NULL) || (key->f.f == NULL))
-	  rl_beep ();
-	else
-	  {
-	     if ((SLang_Last_Key_Char == SLang_RL_EOF_Char)
-		 && (*key->str == 2)
-		 && (This_RLI->len == 0))
-	       rl_eof_insert ();
-	     else if (key->type == SLKEY_F_INTRINSIC)
-	       {
-		  if ((key->f.f)())
-		    RLupdate (rli);
-
-		  if ((rli->flags & SL_RLINE_BLINK_MATCH)
-		      && (rli->input_pending != NULL))
-		    blink_match (rli);
-	       }
-
-	     if (SLang_Rline_Quit)
-	       {
-		  This_RLI->buf[This_RLI->len] = 0;
-		  if (SLang_Error == SL_USER_BREAK)
-		    {
-		       SLang_Error = 0;
-		       return -1;
-		    }
-		  return This_RLI->len;
-	       }
-	  }
-	if (key != NULL)
-	  This_RLI->last_fun = key->f.f;
-     }
-}
-
-static int rl_abort (void)
-{
-   rl_delete_line ();
-   return rl_enter ();
-}
-
-/* TTY interface --- ANSI */
-
-static void ansi_goto_column (int n)
-{
-   putc('\r', stdout);
-   if (n) fprintf(stdout, "\033[%dC", n);
-}
-
-static void rl_select_line (SLang_Read_Line_Type *p)
-{
-   This_RLI->last = p;
-   strcpy ((char *) This_RLI->buf, (char *) p->buf);
-   This_RLI->point = This_RLI->len = strlen((char *) p->buf);
-}
-static int rl_next_line (void);
-static int rl_prev_line (void)
-{
-   SLang_Read_Line_Type *prev;
-
-   if (((This_RLI->last_fun != (FVOID_STAR) rl_prev_line)
-	&& (This_RLI->last_fun != (FVOID_STAR) rl_next_line))
-       || (This_RLI->last == NULL))
-     {
-	prev = This_RLI->tail;
-     }
-   else prev = This_RLI->last->prev;
-
-   if (prev == NULL)
-     {
-	rl_beep ();
-	return 0;
-     }
-
-   rl_select_line (prev);
-   return 1;
-}
-static int rl_redraw (void)
-{
-   SLrline_redraw (This_RLI);
-   return 1;
-}
-
-static int rl_next_line (void)
-{
-   SLang_Read_Line_Type *next;
-
-   if (((This_RLI->last_fun != (FVOID_STAR) rl_prev_line)
-	&& (This_RLI->last_fun != (FVOID_STAR) rl_next_line))
-       || (This_RLI->last == NULL))
-      {
-	 rl_beep ();
-	 return 0;
-      }
-
-   next = This_RLI->last->next;
-
-   if (next == NULL)
-     {
-	This_RLI->len = This_RLI->point = 0;
-	*This_RLI->buf = 0;
-	This_RLI->last = NULL;
-     }
-   else rl_select_line (next);
-   return 1;
-}
-
-static SLKeymap_Function_Type SLReadLine_Functions[] =
-{
-   {"up", rl_prev_line},
-   {"down", rl_next_line},
-   {"bol", rl_bol},
-   {"eol", rl_eol},
-   {"right", rl_right},
-   {"left", rl_left},
-   {"self_insert", rl_self_insert},
-   {"bdel", rl_bdel},
-   {"del", rl_del},
-   {"deleol", rl_deleol},
-   {"enter", rl_enter},
-   {"trim", rl_trim},
-   {"quoted_insert", rl_quote_insert},
-   {(char *) NULL, NULL}
-};
-
-int SLang_init_readline (SLang_RLine_Info_Type *rli)
-{
-   int ch;
-   char simple[2];
-
-   if (RL_Keymap == NULL)
-     {
-	simple[1] = 0;
-	if (NULL == (RL_Keymap = SLang_create_keymap ("ReadLine", NULL)))
-	  return -1;
-
-	RL_Keymap->functions = SLReadLine_Functions;
-
-	/* This breaks under some DEC ALPHA compilers (scary!) */
-#ifndef __DECC
-	for (ch = ' '; ch < 256; ch++)
-	  {
-	     simple[0] = (char) ch;
-	     SLkm_define_key (simple, (FVOID_STAR) rl_self_insert, RL_Keymap);
-	  }
-#else
-	ch = ' ';
-	while (1)
-	  {
-	     simple[0] = (char) ch;
-	     SLkm_define_key (simple, (FVOID_STAR) rl_self_insert, RL_Keymap);
-	     ch = ch + 1;
-	     if (ch == 256) break;
-	  }
-#endif				       /* NOT __DECC */
-
-	simple[0] = SLang_Abort_Char;
-	SLkm_define_key (simple, (FVOID_STAR) rl_abort, RL_Keymap);
-	simple[0] = SLang_RL_EOF_Char;
-	SLkm_define_key (simple, (FVOID_STAR) rl_eof_insert, RL_Keymap);
-
-#ifndef IBMPC_SYSTEM
-	SLkm_define_key  ("^[[A", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("^[[B", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("^[[C", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("^[[D", (FVOID_STAR) rl_left, RL_Keymap);
-	SLkm_define_key  ("^[OA", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("^[OB", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("^[OC", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("^[OD", (FVOID_STAR) rl_left, RL_Keymap);
-#else
-	SLkm_define_key  ("^@H", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("^@P", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("^@M", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("^@K", (FVOID_STAR) rl_left, RL_Keymap);
-	SLkm_define_key  ("^@S", (FVOID_STAR) rl_del, RL_Keymap);
-	SLkm_define_key  ("^@O", (FVOID_STAR) rl_eol, RL_Keymap);
-	SLkm_define_key  ("^@G", (FVOID_STAR) rl_bol, RL_Keymap);
-
-	SLkm_define_key  ("\xE0H", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("\xE0P", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("\xE0M", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("\xE0K", (FVOID_STAR) rl_left, RL_Keymap);
-	SLkm_define_key  ("\xE0S", (FVOID_STAR) rl_del, RL_Keymap);
-	SLkm_define_key  ("\xE0O", (FVOID_STAR) rl_eol, RL_Keymap);
-	SLkm_define_key  ("\xE0G", (FVOID_STAR) rl_bol, RL_Keymap);
-#endif
-	SLkm_define_key  ("^C", (FVOID_STAR) rl_abort, RL_Keymap);
-	SLkm_define_key  ("^E", (FVOID_STAR) rl_eol, RL_Keymap);
-	SLkm_define_key  ("^G", (FVOID_STAR) rl_abort, RL_Keymap);
-	SLkm_define_key  ("^I", (FVOID_STAR) rl_self_insert, RL_Keymap);
-	SLkm_define_key  ("^A", (FVOID_STAR) rl_bol, RL_Keymap);
-	SLkm_define_key  ("\r", (FVOID_STAR) rl_enter, RL_Keymap);
-	SLkm_define_key  ("\n", (FVOID_STAR) rl_enter, RL_Keymap);
-	SLkm_define_key  ("^K", (FVOID_STAR) rl_deleol, RL_Keymap);
-	SLkm_define_key  ("^L", (FVOID_STAR) rl_deleol, RL_Keymap);
-	SLkm_define_key  ("^V", (FVOID_STAR) rl_del, RL_Keymap);
-	SLkm_define_key  ("^D", (FVOID_STAR) rl_del, RL_Keymap);
-	SLkm_define_key  ("^F", (FVOID_STAR) rl_right, RL_Keymap);
-	SLkm_define_key  ("^B", (FVOID_STAR) rl_left, RL_Keymap);
-	SLkm_define_key  ("^?", (FVOID_STAR) rl_bdel, RL_Keymap);
-	SLkm_define_key  ("^H", (FVOID_STAR) rl_bdel, RL_Keymap);
-	SLkm_define_key  ("^P", (FVOID_STAR) rl_prev_line, RL_Keymap);
-	SLkm_define_key  ("^N", (FVOID_STAR) rl_next_line, RL_Keymap);
-	SLkm_define_key  ("^R", (FVOID_STAR) rl_redraw, RL_Keymap);
-	SLkm_define_key  ("`", (FVOID_STAR) rl_quote_insert, RL_Keymap);
-	SLkm_define_key  ("\033\\", (FVOID_STAR) rl_trim, RL_Keymap);
-	if (SLang_Error) return -1;
-     }
-
-   if (rli->prompt == NULL) rli->prompt = "";
-   if (rli->keymap == NULL) rli->keymap = RL_Keymap;
-   rli->old_upd = rli->upd_buf1;
-   rli->new_upd = rli->upd_buf2;
-   *rli->buf = 0;
-   rli->point = 0;
-
-   if (rli->flags & SL_RLINE_USE_ANSI)
-     {
-	if (rli->tt_goto_column == NULL) rli->tt_goto_column = ansi_goto_column;
-     }
-
-   if (Char_Widths[0] == 2) return 0;
-
-   for (ch = 0; ch < 32; ch++) Char_Widths[ch] = 2;
-   for (ch = 32; ch < 256; ch++) Char_Widths[ch] = 1;
-   Char_Widths[127] = 2;
-#ifndef IBMPC_SYSTEM
-   for (ch = 128; ch < 160; ch++) Char_Widths[ch] = 3;
-#endif
-
-   return 0;
-}
-
-SLang_Read_Line_Type *SLang_rline_save_line (SLang_RLine_Info_Type *rli)
-{
-   SLang_Read_Line_Type *rl = NULL;
-   unsigned char *buf;
-
-   if ((rli == NULL) || (rli->buf == NULL))
-     return NULL;
-
-   if (NULL == (rl = (SLang_Read_Line_Type *) SLmalloc (sizeof (SLang_Read_Line_Type)))
-       || (NULL == (buf = (unsigned char *) SLmake_string ((char *)rli->buf))))
-     {
-	SLfree ((char *)rl);
-	return NULL;
-     }
-   rl->buf = buf;
-   rl->buf_len = strlen ((char *)buf);
-   rl->num = rl->misc = 0;
-   rl->next = rl->prev = NULL;
-
-   if (rli->tail != NULL)
-     {
-	rli->tail->next = rl;
-	rl->prev = rli->tail;
-     }
-   rli->tail = rl;
-
-   return rl;
-}
diff --git a/mdk-stage1/slang/slscanf.c b/mdk-stage1/slang/slscanf.c
deleted file mode 100644
index 5bd93ff41..000000000
--- a/mdk-stage1/slang/slscanf.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/* sscanf function for S-Lang */
-/* Copyright (c) 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-#include <ctype.h>
-#include <math.h>
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-static char *skip_whitespace (char *s)
-{
-   while (isspace (*s))
-     s++;
-   
-   return s;
-}
-
-static void init_map (unsigned char map[256], int base)
-{
-   memset ((char *) map, 0xFF, 256);
-   
-   map['0'] = 0;   map['1'] = 1;   map['2'] = 2;   map['3'] = 3;
-   map['4'] = 4;   map['5'] = 5;   map['6'] = 6;   map['7'] = 7;
-   if (base == 8)
-     return;
-
-   map['8'] = 8;   map['9'] = 9;
-   if (base == 10)
-     return;
-
-   map['A'] = 10;   map['B'] = 11;   map['C'] = 12;   map['D'] = 13;
-   map['E'] = 14;   map['F'] = 15;   map['a'] = 10;   map['b'] = 11;
-   map['c'] = 12;   map['d'] = 13;   map['e'] = 14;   map['f'] = 15;
-}
-
-static char *get_sign (char *s, char *smax, int *sign)
-{
-   *sign = 1;
-   if (s + 1 < smax)
-     {
-	if (*s == '+') s++;
-	else if (*s == '-')
-	  {
-	     s++;
-	     *sign = -1;
-	  }
-     }
-   return s;
-}
-
-
-static int parse_long (char **sp, char *smax, long *np,
-		       long base, unsigned char map[256])
-{
-   char *s, *s0;
-   long n;
-   int sign;
-
-   s = s0 = get_sign (*sp, smax, &sign);
-
-   n = 0;
-   while (s < smax)
-     {
-	unsigned char value;
-
-	value = map [(unsigned char) *s];
-	if (value == 0xFF)
-	  break;
-
-	n = base * n + value;
-	s++;
-     }
-
-   *sp = s;
-   if (s == s0)
-     return 0;
-
-   *np = n * sign;
-
-   return 1;
-}
-
-
-static int parse_int (char **sp, char *smax, int *np,
-		      long base, unsigned char map[256])
-{
-   long n;
-   int status;
-
-   if (1 == (status = parse_long (sp, smax, &n, base, map)))
-     *np = (int) n;
-   return status;
-}
-
-static int parse_short (char **sp, char *smax, short *np,
-			long base, unsigned char map[256])
-{
-   long n;
-   int status;
-
-   if (1 == (status = parse_long (sp, smax, &n, base, map)))
-     *np = (short) n;
-   return status;
-}
-
-static int parse_ulong (char **sp, char *smax, unsigned long *np,
-			long base, unsigned char map[256])
-{
-   return parse_long (sp, smax, (long *) np, base, map);
-}
-
-static int parse_uint (char **sp, char *smax, unsigned int *np,
-		       long base, unsigned char map[256])
-{
-   return parse_int (sp, smax, (int *) np, base, map);
-}
-
-static int parse_ushort (char **sp, char *smax, unsigned short *np,
-			 long base, unsigned char map[256])
-{
-   return parse_short (sp, smax, (short *) np, base, map);
-}
-
-#if SLANG_HAS_FLOAT
-/* 
- * In an ideal world, strtod would be the correct function to use.  However,
- * there may be problems relying on this function because some systems do
- * not support and some that do get it wrong.  So, I will handle the parsing
- * of the string and let atof or strtod handle the arithmetic.
- */
-static int parse_double (char **sp, char *smax, double *d)
-{
-   char *s, *s0;
-   int sign;
-   int expon;
-   unsigned char map[256];
-   char buf[128];
-   int has_leading_zeros;
-   char *start_pos, *sign_pos;
-   char *b, *bmax;
-
-   start_pos = *sp;
-   s = get_sign (start_pos, smax, &sign);
-   if (s >= smax)
-     {
-	errno = _SLerrno_errno = EINVAL;
-	return 0;
-     }
-
-   /* Prepare the buffer that will be passed to strtod */
-   /* Allow the exponent to be 5 significant digits: E+xxxxx\0 */
-   bmax = buf + (sizeof (buf) - 8);
-   buf[0] = '0'; buf[1] = '.';
-   b = buf + 2;
-
-   init_map (map, 10);
-
-   /* Skip leading 0s */
-   s0 = s;
-   while ((s < smax) && (*s == '0'))
-     s++;
-   has_leading_zeros = (s != s0);
-
-   expon = 0;
-   while (s < smax)
-     {
-	unsigned char value = map [(unsigned char) *s];
-
-	if (value == 0xFF)
-	  break;
-	
-	if (b < bmax)
-	  *b++ = *s;
-	
-	expon++;
-	s++;
-     }
-   
-   if ((s < smax) && (*s == '.'))
-     {
-	s++;
-	if (b == buf + 2)	       /* nothing added yet */
-	  {
-	     while ((s < smax) && (*s == '0'))
-	       {
-		  expon--;
-		  s++;
-	       }
-	  }
-
-	while (s < smax)
-	  {
-	     unsigned char value = map [(unsigned char) *s];
-
-	     if (value == 0xFF)
-	       break;
-	     
-	     if (b < bmax)
-	       *b++ = *s;
-	     s++;
-	  }
-     }
-
-   if ((b == buf + 2)
-       && (has_leading_zeros == 0))
-     {
-	*sp = start_pos;
-	errno = EINVAL;
-	return 0;
-     }
-
-   if ((s + 1 < smax) && ((*s == 'E') || (*s == 'e')))
-     {
-	int e;
-	int esign;
-
-	s0 = s;
-	s = get_sign (s + 1, smax, &esign);
-	sign_pos = s;
-	e = 0;
-	while (s < smax)
-	  {
-	     unsigned char value = map [(unsigned char) *s];
-	     if (value == 0xFF)
-	       break;
-	     if (e < 25000)	       /* avoid overflow if 16 bit */
-	       e = 10 * e + value;
-	     s++;
-	  }
-#ifdef ERANGE
-	if (e >= 25000)
-	  errno = ERANGE;
-#endif
-	if (s == sign_pos)
-	  s = s0;		       /* ...E-X */
-	else
-	  {
-	     e = esign * e;
-	     expon += e;
-	  }
-     }
-   
-   if (expon != 0)
-     sprintf (b, "e%d", expon);
-   else
-     *b = 0;
-   
-   *sp = s;
-#if HAVE_STRTOD
-   *d = sign * strtod (buf, NULL);
-#else
-   *d = sign * atof (buf);
-#endif
-   return 1;
-}
-
-static int parse_float (char **sp, char *smax, float *d)
-{
-   double x;
-   if (1 == parse_double (sp, smax, &x))
-     {
-	*d = (float) x;
-	return 1;
-     }
-   return 0;
-}
-#endif				       /* SLANG_HAS_FLOAT */
-
-static int parse_string (char **sp, char *smax, char **str)
-{
-   char *s, *s0;
-   
-   s0 = s = *sp;
-   while (s < smax)
-     {
-	if (isspace (*s))
-	  break;
-	s++;
-     }
-   if (NULL == (*str = SLang_create_nslstring (s0, (unsigned int) (s - s0))))
-     return -1;
-   
-   *sp = s;
-   return 1;
-}
-
-static int parse_bstring (char **sp, char *smax, char **str)
-{
-   char *s;
-   
-   s = *sp;
-   if (NULL == (*str = SLang_create_nslstring (s, (unsigned int) (smax - s))))
-     return -1;
-   
-   *sp = smax;
-   return 1;
-}
-
-static int parse_range (char **sp, char *smax, char **fp, char **str)
-{
-   char *s, *s0;
-   char *range;
-   char *f;
-   unsigned char map[256];
-   unsigned char reverse;
-
-   /* How can one represent a range with just '^'?  The naive answer is
-    * is [^].  However, this may be interpreted as meaning any character
-    * but ']' and others.  Let's assume that the user will not use a range
-    * to match '^'.
-    */
-   f = *fp;
-   /* f is a pointer to (one char after) [...]. */
-   if (*f == '^')
-     {
-	f++;
-	reverse = 1;
-     }
-   else reverse = 0;
-
-   s0 = f;
-   if (*f == ']')
-     f++;
-
-   while (1)
-     {
-	char ch = *f;
-
-	if (ch == 0)
-	  {
-	     SLang_verror (SL_INVALID_PARM, "Unexpected end of range in format");
-	     return -1;
-	  }
-	if (ch == ']')
-	  break;
-	f++;
-     }
-   if (NULL == (range = SLmake_nstring (s0, (unsigned int) (f - s0))))
-     return -1;
-   *fp = f + 1;			       /* skip ] */
-   
-   SLmake_lut (map, (unsigned char *) range, reverse);
-   SLfree (range);
-
-   s0 = s = *sp;
-   while ((s < smax) && map [(unsigned char) *s])
-     s++;
-   
-   if (NULL == (*str = SLang_create_nslstring (s0, (unsigned int) (s - s0))))
-     return -1;
-   
-   *sp = s;
-   return 1;
-}
-
-  
-int _SLang_sscanf (void)
-{
-   int num;
-   unsigned int num_refs;
-   char *format;
-   char *input_string, *input_string_max;
-   char *f, *s;
-   unsigned char map8[256], map10[256], map16[256];
-
-   if (SLang_Num_Function_Args < 2)
-     {
-	SLang_verror (SL_INVALID_PARM, "Int_Type sscanf (str, format, ...)");
-	return -1;
-     }
-   
-   num_refs = (unsigned int) SLang_Num_Function_Args;
-   if (-1 == SLreverse_stack (num_refs))
-     return -1;
-   num_refs -= 2;
-
-   if (-1 == SLang_pop_slstring (&input_string))
-     return -1;
-
-   if (-1 == SLang_pop_slstring (&format))
-     {
-	SLang_free_slstring (input_string);
-	return -1;
-     }
-   
-   f = format;
-   s = input_string;
-   input_string_max = input_string + strlen (input_string);
-
-   init_map (map8, 8);
-   init_map (map10, 10);
-   init_map (map16, 16);
-
-   num = 0;
-
-   while (num_refs != 0)
-     {
-	SLang_Object_Type obj;
-	SLang_Ref_Type *ref;
-	char *smax;
-	unsigned char *map;
-	int base;
-	int no_assign;
-	int is_short;
-	int is_long;
-	int status;
-	char chf;
-	unsigned int width;
-	int has_width;
-
-	chf = *f++;
-
-	if (chf == 0)
-	  {
-	     /* Hmmm....  what is the most useful thing to do?? */
-#if 1
-	     break;
-#else
-	     SLang_verror (SL_INVALID_PARM, "sscanf: format not big enough for output list");
-	     goto return_error;
-#endif
-	  }
-
-	if (isspace (chf))
-	  {
-	     s = skip_whitespace (s);
-	     continue;
-	  }
-	
-	if ((chf != '%')
-	    || ((chf = *f++) == '%'))
-	  {
-	     if (*s != chf)
-	       break;
-	     s++;
-	     continue;
-	  }
-
-	no_assign = 0;
-	is_short = 0;
-	is_long = 0;
-	width = 0;
-	smax = input_string_max;
-
-	/* Look for the flag character */
-	if (chf == '*')
-	  {
-	     no_assign = 1;
-	     chf = *f++;
-	  }
-	
-	/* Width */
-	has_width = isdigit (chf);
-	if (has_width)
-	  {
-	     f--;
-	     (void) parse_uint (&f, f + strlen(f), &width, 10, map10);
-	     chf = *f++;
-	  }
-
-	/* Now the type modifier */
-	switch (chf)
-	  {
-	   case 'h':
-	     is_short = 1;
-	     chf = *f++;
-	     break;
-	     
-	   case 'L':		       /* not implemented */
-	   case 'l':
-	     is_long = 1;
-	     chf = *f++;
-	     break;
-	  }
-
-	status = -1;
-
-	if ((chf != 'c') && (chf != '['))
-	  s = skip_whitespace (s);
-
-	if (has_width)
-	  {
-	     if (width > (unsigned int) (input_string_max - s))
-	       width = (unsigned int) (input_string_max - s);
-	     smax = s + width;
-	  }
-	     
-	/* Now the format descriptor */
-
-	map = map10;
-	base = 10;
-
-	try_again:		       /* used by i, x, and o, conversions */
-	switch (chf)
-	  {
-	   case 0:
-	     SLang_verror (SL_INVALID_PARM, "sscanf: Unexpected end of format");
-	     goto return_error;
-	   case 'D':
-	     is_long = 1;
-	   case 'd':
-	     if (is_short)
-	       {
-		  obj.data_type = SLANG_SHORT_TYPE;
-		  status = parse_short (&s, smax, &obj.v.short_val, base, map);
-	       }
-	     else if (is_long)
-	       {
-		  obj.data_type = SLANG_LONG_TYPE;
-		  status = parse_long (&s, smax, &obj.v.long_val, base, map);
-	       }
-	     else
-	       {
-		  obj.data_type = SLANG_INT_TYPE;
-		  status = parse_int (&s, smax, &obj.v.int_val, base, map);
-	       }
-	     break;
-	     
-
-	   case 'U':
-	     is_long = 1;
-	   case 'u':
-	     if (is_short)
-	       {
-		  obj.data_type = SLANG_USHORT_TYPE;
-		  status = parse_ushort (&s, smax, &obj.v.ushort_val, base, map);
-	       }
-	     else if (is_long)
-	       {
-		  obj.data_type = SLANG_ULONG_TYPE;
-		  status = parse_ulong (&s, smax, &obj.v.ulong_val, base, map);
-	       }
-	     else
-	       {
-		  obj.data_type = SLANG_INT_TYPE;
-		  status = parse_uint (&s, smax, &obj.v.uint_val, base, map);
-	       }
-	     break;
-
-	   case 'I':
-	     is_long = 1;
-	   case 'i':
-	     if ((s + 1 >= smax)
-		 || (*s != 0))
-	       chf = 'd';
-	     else if (((s[1] == 'x') || (s[1] == 'X'))
-		      && (s + 2 < smax))
-	       {
-		  s += 2;
-		  chf = 'x';
-	       }
-	     else chf = 'o';
-	     goto try_again;
-	     
-	   case 'O':
-	     is_long = 1;
-	   case 'o':
-	     map = map8;
-	     base = 8;
-	     chf = 'd';
-	     goto try_again;
-	     
-	   case 'X':
-	     is_long = 1;
-	   case 'x':
-	     base = 16;
-	     map = map16;
-	     chf = 'd';
-	     goto try_again;
-
-	   case 'E':
-	   case 'F':
-	     is_long = 1;
-	   case 'e':
-	   case 'f':
-	   case 'g':
-#if SLANG_HAS_FLOAT
-	     if (is_long)
-	       {
-		  obj.data_type = SLANG_DOUBLE_TYPE;
-		  status = parse_double (&s, smax, &obj.v.double_val);
-	       }
-	     else
-	       {
-		  obj.data_type = SLANG_FLOAT_TYPE;
-		  status = parse_float (&s, smax, &obj.v.float_val);
-	       }
-#else
-	     SLang_verror (SL_NOT_IMPLEMENTED,
-			   "This version of the S-Lang does not support floating point");
-	     status = -1;
-#endif
-	     break;
-		  
-	   case 's':
-	     obj.data_type = SLANG_STRING_TYPE;
-	     status = parse_string (&s, smax, &obj.v.s_val);
-	     break;
-	     
-	   case 'c':
-	     if (has_width == 0)
-	       {
-		  obj.data_type = SLANG_UCHAR_TYPE;
-		  obj.v.uchar_val = *s++;
-		  status = 1;
-		  break;
-	       }
-	     obj.data_type = SLANG_STRING_TYPE;
-	     status = parse_bstring (&s, smax, &obj.v.s_val);
-	     break;
-	     
-	   case '[':
-	     obj.data_type = SLANG_STRING_TYPE;
-	     status = parse_range (&s, smax, &f, &obj.v.s_val);
-	     break;
-	     
-	   case 'n':
-	     obj.data_type = SLANG_UINT_TYPE;
-	     obj.v.uint_val = (unsigned int) (s - input_string);
-	     status = 1;
-	     break;
-	     
-	   default:
-	     status = -1;
-	     SLang_verror (SL_NOT_IMPLEMENTED, "format specifier '%c' is not supported", chf);
-	     break;
-	  }
-	
-	if (status == 0)
-	  break;
-
-	if (status == -1)
-	  goto return_error;
-
-	if (no_assign)
-	  {
-	     SLang_free_object (&obj);
-	     continue;
-	  }
-
-	if (-1 == SLang_pop_ref (&ref))
-	  {
-	     SLang_free_object (&obj);
-	     goto return_error;
-	  }
-	
-	if (-1 == SLang_push (&obj))
-	  {
-	     SLang_free_object (&obj);
-	     SLang_free_ref (ref);
-	     goto return_error;
-	  }
-	
-	if (-1 == _SLang_deref_assign (ref))
-	  {
-	     SLang_free_ref (ref);
-	     goto return_error;
-	  }
-	SLang_free_ref (ref);
-
-	num++;
-	num_refs--;
-     }
-
-   if (-1 == SLdo_pop_n (num_refs))
-     goto return_error;
-   
-   SLang_free_slstring (format);
-   SLang_free_slstring (input_string);
-   return num;
-
-   return_error:
-   /* NULLS ok */
-   SLang_free_slstring (format);
-   SLang_free_slstring (input_string);
-   return -1;
-}
-
-   
-# if SLANG_HAS_FLOAT
-
-#ifndef HAVE_STDLIB_H
-/* Oh dear.  Where is the prototype for atof?  If not in stdlib, then
- * I do not know where.  Not in math.h on some systems either.
- */
-extern double atof ();
-#endif
-
-double _SLang_atof (char *s)
-{
-   double x;
-
-   s = skip_whitespace (s);
-   errno = 0;
-
-   if (1 != parse_double (&s, s + strlen (s), &x))
-     {
-	if ((0 == strcmp ("NaN", s))
-	    || (0 == strcmp ("-Inf", s))
-	    || (0 == strcmp ("Inf", s)))
-	  return atof (s);	       /* let this deal with it */
-#ifdef EINVAL
-	errno = _SLerrno_errno = EINVAL;
-#endif
-	return 0.0;
-     }
-   if (errno) 
-     _SLerrno_errno = errno;
-   return x;
-}
-#endif
diff --git a/mdk-stage1/slang/slscroll.c b/mdk-stage1/slang/slscroll.c
deleted file mode 100644
index 358296116..000000000
--- a/mdk-stage1/slang/slscroll.c
+++ /dev/null
@@ -1,450 +0,0 @@
-/* SLang Scrolling Window Routines */
-/* Copyright (c) 1996, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-static void find_window_bottom (SLscroll_Window_Type *win)
-{
-   unsigned int nrows;
-   unsigned int hidden_mask;
-   SLscroll_Type *bot, *cline, *last_bot;
-   unsigned int row;
-
-   nrows = win->nrows;
-   hidden_mask = win->hidden_mask;
-   cline = win->current_line;
-
-   win->window_row = row = 0;
-   last_bot = bot = win->top_window_line;
-
-   while (row < nrows)
-     {
-	if (bot == cline)
-	  win->window_row = row;
-
-	last_bot = bot;
-
-	if (bot == NULL)
-	  break;
-
-	bot = bot->next;
-
-	if (hidden_mask)
-	  {
-	     while ((bot != NULL) && (bot->flags & hidden_mask))
-	       bot = bot->next;
-	  }
-
-	row++;
-     }
-
-   win->bot_window_line = last_bot;
-}
-
-static int find_top_to_recenter (SLscroll_Window_Type *win)
-{
-   unsigned int nrows;
-   unsigned int hidden_mask;
-   SLscroll_Type *prev, *last_prev, *cline;
-
-   nrows = win->nrows;
-   cline = win->current_line;
-   hidden_mask = win->hidden_mask;
-
-   nrows = nrows / 2;
-
-   last_prev = prev = cline;
-
-   while (nrows && (prev != NULL))
-     {
-	nrows--;
-	last_prev = prev;
-	do
-	  {
-	     prev = prev->prev;
-	  }
-	while (hidden_mask
-	       && (prev != NULL)
-	       && (prev->flags & hidden_mask));
-     }
-
-   if (prev == NULL) prev = last_prev;
-
-   win->top_window_line = prev;
-   find_window_bottom (win);
-
-   return 0;
-}
-
-#define HAS_BORDER_CODE 1
-int SLscroll_find_top (SLscroll_Window_Type *win)
-{
-   unsigned int i;
-   SLscroll_Type *cline, *prev, *next;
-   SLscroll_Type *top_window_line;
-   unsigned int nrows;
-   unsigned int hidden_mask;
-   int scroll_mode;
-   unsigned int border;
-
-   cline = win->current_line;
-   nrows = win->nrows;
-   scroll_mode = win->cannot_scroll;
-   border = win->border;
-   if (scroll_mode == 2)
-     border = 0;
-
-   if ((cline == NULL) || (nrows <= 1))
-     {
-	win->top_window_line = cline;
-	find_window_bottom (win);
-	return 0;
-     }
-
-   hidden_mask = win->hidden_mask;
-
-   /* Note: top_window_line might be a bogus pointer.  This means that I cannot
-    * access it unless it really corresponds to a pointer in the buffer.
-    */
-   top_window_line = win->top_window_line;
-
-   if (top_window_line == NULL)
-     return find_top_to_recenter (win);
-
-   /* Chances are that the current line is visible in the window.  This means
-    * that the top window line should be above it.
-    */
-   prev = cline;
-
-   i = 0;
-
-   while ((i < nrows) && (prev != NULL))
-     {
-	if (prev == top_window_line)
-	  {
-	     SLscroll_Type *twl = top_window_line;
-	     int dir = 0;
-
-	     if (i < border) dir = -1; else if (i + border >= nrows) dir = 1;
-
-	     if (dir) while (border)
-	       {
-		  if (dir < 0) twl = twl->prev;
-		  else twl = twl->next;
-
-		  if (twl == NULL)
-		    {
-		       twl = top_window_line;
-		       break;
-		    }
-		  if ((hidden_mask == 0)
-		      || (0 == (twl->flags & hidden_mask)))
-		    border--;
-	       }
-
-	     win->top_window_line = twl;
-	     find_window_bottom (win);
-	     return 0;
-	  }
-
-	do
-	  {
-	     prev = prev->prev;
-	  }
-	while (hidden_mask
-	       && (prev != NULL)
-	       && (prev->flags & hidden_mask));
-	i++;
-     }
-
-   /* Now check the borders of the window.  Perhaps the current line lies
-    * outsider the border by a line.  Only do this if terminal can scroll.
-    */
-
-   if (scroll_mode == 1)
-     return find_top_to_recenter (win);
-   else if (scroll_mode == -1)
-     scroll_mode = 0;
-
-   next = cline->next;
-   while (hidden_mask
-	  && (next != NULL)
-	  && (next->flags & hidden_mask))
-     next = next->next;
-
-   if ((next != NULL)
-       && (next == top_window_line))
-     {
-	/* The current line is one line above the window.  This means user
-	 * has moved up past the top of the window.  If scroll_mode is set
-	 * to scroll by pages, we need to do a page up.
-	 */
-
-	win->top_window_line = cline;
-	find_window_bottom (win);
-
-	if (scroll_mode) return SLscroll_pageup (win);
-
-	return 0;
-     }
-
-   prev = cline->prev;
-
-   while (hidden_mask
-	  && (prev != NULL)
-	  && (prev->flags & hidden_mask))
-     prev = prev->prev;
-
-   if ((prev == NULL)
-       || (prev != win->bot_window_line))
-     return find_top_to_recenter (win);
-
-   /* It looks like cline is below window by one line.  See what line should
-    * be at top to scroll it into view.  Only do this unless we are scrolling
-    * by pages.
-    */
-   if (scroll_mode)
-     {
-	win->top_window_line = cline;
-	find_window_bottom (win);
-	return 0;
-     }
-
-   i = 2;
-   while ((i < nrows) && (prev != NULL))
-     {
-	do
-	  {
-	     prev = prev->prev;
-	  }
-	while (hidden_mask
-	       && (prev != NULL)
-	       && (prev->flags & hidden_mask));
-	i++;
-     }
-
-   if (prev != NULL)
-     {
-	win->top_window_line = prev;
-	find_window_bottom (win);
-	return 0;
-     }
-
-   return find_top_to_recenter (win);
-}
-
-int SLscroll_find_line_num (SLscroll_Window_Type *win)
-{
-   SLscroll_Type *cline, *l;
-   unsigned int n;
-   unsigned int hidden_mask;
-
-   if (win == NULL) return -1;
-
-   hidden_mask = win->hidden_mask;
-   cline = win->current_line;
-
-   n = 1;
-
-   l = win->lines;
-   while (l != cline)
-     {
-	if ((hidden_mask == 0)
-	    || (0 == (l->flags & hidden_mask)))
-	  n++;
-
-	l = l->next;
-     }
-
-   win->line_num = n;
-   n--;
-
-   while (l != NULL)
-     {
-	if ((hidden_mask == 0)
-	    || (0 == (l->flags & hidden_mask)))
-	  n++;
-	l = l->next;
-     }
-   win->num_lines = n;
-
-   return 0;
-}
-
-unsigned int SLscroll_next_n (SLscroll_Window_Type *win, unsigned int n)
-{
-   unsigned int i;
-   unsigned int hidden_mask;
-   SLscroll_Type *l, *cline;
-
-   if ((win == NULL)
-       || (NULL == (cline = win->current_line)))
-     return 0;
-
-   hidden_mask = win->hidden_mask;
-   l = cline;
-   i = 0;
-   while (i < n)
-     {
-	l = l->next;
-	while (hidden_mask
-	       && (l != NULL) && (l->flags & hidden_mask))
-	  l = l->next;
-
-	if (l == NULL)
-	  break;
-
-	i++;
-	cline = l;
-     }
-
-   win->current_line = cline;
-   win->line_num += i;
-   return i;
-}
-
-unsigned int SLscroll_prev_n (SLscroll_Window_Type *win, unsigned int n)
-{
-   unsigned int i;
-   unsigned int hidden_mask;
-   SLscroll_Type *l, *cline;
-
-   if ((win == NULL)
-       || (NULL == (cline = win->current_line)))
-     return 0;
-
-   hidden_mask = win->hidden_mask;
-   l = cline;
-   i = 0;
-   while (i < n)
-     {
-	l = l->prev;
-	while (hidden_mask
-	       && (l != NULL) && (l->flags & hidden_mask))
-	  l = l->prev;
-
-	if (l == NULL)
-	  break;
-
-	i++;
-	cline = l;
-     }
-
-   win->current_line = cline;
-   win->line_num -= i;
-   return i;
-}
-
-int SLscroll_pageup (SLscroll_Window_Type *win)
-{
-   SLscroll_Type *l, *top;
-   unsigned int nrows, hidden_mask;
-   unsigned int n;
-
-   if (win == NULL)
-     return -1;
-
-   (void) SLscroll_find_top (win);
-
-   nrows = win->nrows;
-
-   if ((NULL != (top = win->top_window_line))
-       && (nrows > 2))
-     {
-	n = 0;
-	hidden_mask = win->hidden_mask;
-	l = win->current_line;
-	while ((l != NULL) && (l != top))
-	  {
-	     l = l->prev;
-	     if ((hidden_mask == 0)
-		 || ((l != NULL) && (0 == (l->flags & hidden_mask))))
-	       n++;
-	  }
-
-	if (l != NULL)
-	  {
-	     unsigned int save_line_num;
-	     int ret = 0;
-
-	     win->current_line = l;
-	     win->line_num -= n;
-
-	     /* Compute a new top/bottom header */
-	     save_line_num = win->line_num;
-
-	     if ((0 == SLscroll_prev_n (win, nrows - 1))
-		 && (n == 0))
-	       ret = -1;
-
-	     win->top_window_line = win->current_line;
-	     win->current_line = l;
-	     win->line_num = save_line_num;
-
-	     find_window_bottom (win);
-	     return ret;
-	  }
-     }
-
-   if (nrows < 2) nrows++;
-   if (0 == SLscroll_prev_n (win, nrows - 1))
-     return -1;
-   return 0;
-}
-
-int SLscroll_pagedown (SLscroll_Window_Type *win)
-{
-   SLscroll_Type *l, *bot;
-   unsigned int nrows, hidden_mask;
-   unsigned int n;
-
-   if (win == NULL)
-     return -1;
-
-   (void) SLscroll_find_top (win);
-
-   nrows = win->nrows;
-
-   if ((NULL != (bot = win->bot_window_line))
-       && (nrows > 2))
-     {
-	n = 0;
-	hidden_mask = win->hidden_mask;
-	l = win->current_line;
-	while ((l != NULL) && (l != bot))
-	  {
-	     l = l->next;
-	     if ((hidden_mask == 0)
-		 || ((l != NULL) && (0 == (l->flags & hidden_mask))))
-	       n++;
-	  }
-
-	if (l != NULL)
-	  {
-	     win->current_line = l;
-	     win->top_window_line = l;
-	     win->line_num += n;
-
-	     find_window_bottom (win);
-
-	     if (n || (bot != win->bot_window_line))
-	       return 0;
-
-	     return -1;
-	  }
-     }
-
-   if (nrows < 2) nrows++;
-   if (0 == SLscroll_next_n (win, nrows - 1))
-     return -1;
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slsearch.c b/mdk-stage1/slang/slsearch.c
deleted file mode 100644
index a9a427a7d..000000000
--- a/mdk-stage1/slang/slsearch.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef upcase
-# undef upcase
-#endif
-
-#define upcase(ch) (cs ? ch : UPPER_CASE(ch))
-
-static unsigned char *search_forward (register unsigned char *beg,
-				      unsigned char *end,
-				      unsigned char *key,
-				      register int key_len, int cs, int *ind)
-{
-   register unsigned char char1;
-   unsigned char *pos;
-   int j, str_len;
-   register unsigned char ch;
-   register int db;
-
-   str_len = (int) (end - beg);
-   if (str_len < key_len) return (NULL);
-   
-   if (key_len == 0)
-     return NULL;
-
-   char1 = key[key_len - 1];
-   beg += (key_len - 1);
-
-   while(1)
-     {
-	if (cs) while (beg < end)
-	  {
-	     ch = *beg;
-	     db = ind[(unsigned char) ch];
-	     if ((db < key_len) && (ch == char1)) break;
-	     beg += db; /* ind[(unsigned char) ch]; */
-	  }
-	else while (beg < end)
-	  {
-	     ch = *beg;
-	     db = ind[(unsigned char) ch];
-	     if ((db < key_len) &&
-		 (UPPER_CASE(ch) == char1)) break;
-	     beg += db; /* ind[(unsigned char) ch]; */
-	  }
-
-	if (beg >= end) return(NULL);
-
-	pos = beg - (key_len - 1);
-	for (j = 0; j < key_len; j++)
-	  {
-	     ch = upcase(pos[j]);
-	     if (ch != (unsigned char) key[j]) break;
-	  }
-
-	if (j == key_len) return(pos);
-	beg += 1;
-     }
-}
-
-static unsigned char *search_backward (unsigned char *beg,unsigned char *end,
-				       unsigned char *key, int key_len,
-				       int cs, int *ind)
-{
-   unsigned char ch, char1;
-   int j, str_len, ofs;
-
-    str_len = (int) (end - beg);
-    if (str_len < key_len) return (NULL);
-   
-   if (key_len == 0)
-     return NULL;
-	
-   /*  end -= (key_len - 1); */
-   end -= key_len;
-
-    char1 = key[0];
-
-    while(1)
-      {
-	 while ((beg <= end) && (ch = *end, ch = upcase(ch), ch != char1))
-	   {
-	      ofs = ind[(unsigned char) ch];
-#ifdef __MSDOS__
-	      /* This is needed for msdos segment wrapping problems */
-	      if (beg + ofs > end) return(NULL);
-#endif
-	      end -= ofs;
-	   }
-	 if (beg > end) return(NULL);
-	 for (j = 1; j < key_len; j++)
-	   {
-	      ch = upcase(end[j]);
-	      if (ch != key[j]) break;
-	   }
-	 if (j == key_len) return(end);
-	 end--;
-      }
-}
-
-unsigned char *SLsearch (unsigned char *pmin, unsigned char *pmax,
-			 SLsearch_Type *st)
-{
-   if (st->dir > 0) return search_forward (pmin, pmax, st->key,
-					   st->key_len, st->cs, st->ind);
-   else return search_backward (pmin, pmax, st->key,
-				st->key_len, st->cs, st->ind);
-}
-
-static int Case_Tables_Ok;
-
-int SLsearch_init (char *str, int dir, int cs, SLsearch_Type *st)
-{
-   int i, maxi;
-   register int max = strlen(str);
-   unsigned char *w, *work = st->key;
-   register int *indp, *indpm;
-   int *ind = st->ind;
-
-   if (max >= (int) sizeof (st->key))
-     {
-	SLang_doerror ("Search string too long.");
-	return -1;
-     }
-
-   st->dir = dir; st->cs = cs;
-
-   if (!Case_Tables_Ok) SLang_init_case_tables ();
-
-   if (dir > 0)
-     {
-	w = work;
-     }
-   else
-     {
-	maxi = max - 1;
-	str = str + maxi;
-	w = work + maxi;
-     }
-
-   /* for (i = 0; i < 256; i++) ind[i] = max; */
-   indp = ind; indpm = ind + 256;
-   while (indp < indpm)
-     {
-	*indp++ = max;
-	*indp++ = max;
-	*indp++ = max;
-	*indp++ = max;
-     }
-
-   i = 0;
-   if (cs) while (i < max)
-     {
-	i++;
-	maxi = max - i;
-	*w = *str;
-	ind[(unsigned char) *str] = maxi;
-	str += dir; w += dir;
-     }
-   else while (i < max)
-     {
-	i++;
-	maxi = max - i;
-	*w = UPPER_CASE(*str);
-	ind[(unsigned char) *w] = maxi;
-	ind[(unsigned char) LOWER_CASE(*str)] = maxi;
-	str += dir; w += dir;
-     }
-
-   work[max] = 0;
-   st->key_len = max;
-   return max;
-}
-
-/* 8bit clean upper and lowercase macros */
-unsigned char _SLChg_LCase_Lut[256];
-unsigned char _SLChg_UCase_Lut[256];
-
-void SLang_define_case (int *u, int *l)
-{
-   unsigned char up = (unsigned char) *u, dn = (unsigned char) *l;
-
-   _SLChg_LCase_Lut[up] = dn;
-   _SLChg_LCase_Lut[dn] = dn;
-   _SLChg_UCase_Lut[dn] = up;
-   _SLChg_UCase_Lut[up] = up;
-}
-
-void SLang_init_case_tables (void)
-{
-   int i, j;
-   if (Case_Tables_Ok) return;
-
-   for (i = 0; i < 256; i++)
-     {
-	_SLChg_UCase_Lut[i] = i;
-	_SLChg_LCase_Lut[i] = i;
-     }
-
-   for (i = 'A'; i <= 'Z'; i++)
-     {
-	j = i + 32;
-	_SLChg_UCase_Lut[j] = i;
-	_SLChg_LCase_Lut[i] = j;
-     }
-#ifdef PC_SYSTEM
-   /* Initialize for DOS code page 437. */
-   _SLChg_UCase_Lut[135] = 128; _SLChg_LCase_Lut[128] = 135;
-   _SLChg_UCase_Lut[132] = 142; _SLChg_LCase_Lut[142] = 132;
-   _SLChg_UCase_Lut[134] = 143; _SLChg_LCase_Lut[143] = 134;
-   _SLChg_UCase_Lut[130] = 144; _SLChg_LCase_Lut[144] = 130;
-   _SLChg_UCase_Lut[145] = 146; _SLChg_LCase_Lut[146] = 145;
-   _SLChg_UCase_Lut[148] = 153; _SLChg_LCase_Lut[153] = 148;
-   _SLChg_UCase_Lut[129] = 154; _SLChg_LCase_Lut[154] = 129;
-   _SLChg_UCase_Lut[164] = 165; _SLChg_LCase_Lut[165] = 164;
-#else
-   /* ISO Latin */
-   for (i = 192; i <= 221; i++)
-     {
-	j = i + 32;
-	_SLChg_UCase_Lut[j] = i;
-	_SLChg_LCase_Lut[i] = j;
-     }
-   _SLChg_UCase_Lut[215] = 215; _SLChg_LCase_Lut[215] = 215;
-   _SLChg_UCase_Lut[223] = 223; _SLChg_LCase_Lut[223] = 223;
-   _SLChg_UCase_Lut[247] = 247; _SLChg_LCase_Lut[247] = 247;
-   _SLChg_UCase_Lut[255] = 255; _SLChg_LCase_Lut[255] = 255;
-#endif
-   Case_Tables_Ok = 1;
-}
diff --git a/mdk-stage1/slang/slsignal.c b/mdk-stage1/slang/slsignal.c
deleted file mode 100644
index 30707dea5..000000000
--- a/mdk-stage1/slang/slsignal.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include <signal.h>
-
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_WAIT_H
-# include <sys/wait.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-/* Do not trust these environments */
-#if defined(__CYGWIN32__) || defined(__MINGW32__) || defined(AMIGA)
-# ifdef SLANG_POSIX_SIGNALS
-#  undef SLANG_POSIX_SIGNALS
-# endif
-#endif
-
-/* This function will cause system calls to be restarted after signal if possible */
-SLSig_Fun_Type *SLsignal (int sig, SLSig_Fun_Type *f)
-{
-#if defined(SLANG_POSIX_SIGNALS)
-   struct sigaction old_sa, new_sa;
-
-# ifdef SIGALRM
-   /* We want system calls to be interrupted by SIGALRM. */
-   if (sig == SIGALRM) return SLsignal_intr (sig, f);
-# endif
-
-   sigemptyset (&new_sa.sa_mask);
-   new_sa.sa_handler = f;
-
-   new_sa.sa_flags = 0;
-# ifdef SA_RESTART
-   new_sa.sa_flags |= SA_RESTART;
-# endif
-
-   if (-1 == sigaction (sig, &new_sa, &old_sa))
-     return (SLSig_Fun_Type *) SIG_ERR;
-
-   return old_sa.sa_handler;
-#else
-   /* Not POSIX. */
-   return signal (sig, f);
-#endif
-}
-
-/* This function will NOT cause system calls to be restarted after
- * signal if possible
- */
-SLSig_Fun_Type *SLsignal_intr (int sig, SLSig_Fun_Type *f)
-{
-#ifdef SLANG_POSIX_SIGNALS
-   struct sigaction old_sa, new_sa;
-
-   sigemptyset (&new_sa.sa_mask);
-   new_sa.sa_handler = f;
-
-   new_sa.sa_flags = 0;
-# ifdef SA_INTERRUPT
-   new_sa.sa_flags |= SA_INTERRUPT;
-# endif
-
-   if (-1 == sigaction (sig, &new_sa, &old_sa))
-     return (SLSig_Fun_Type *) SIG_ERR;
-
-   return old_sa.sa_handler;
-#else
-   /* Not POSIX. */
-   return signal (sig, f);
-#endif
-}
-
-/* We are primarily interested in blocking signals that would cause the
- * application to reset the tty.  These include suspend signals and
- * possibly interrupt signals.
- */
-#ifdef SLANG_POSIX_SIGNALS
-static sigset_t Old_Signal_Mask;
-#endif
-
-static volatile unsigned int Blocked_Depth;
-
-int SLsig_block_signals (void)
-{
-#ifdef SLANG_POSIX_SIGNALS
-   sigset_t new_mask;
-#endif
-
-   Blocked_Depth++;
-   if (Blocked_Depth != 1)
-     {
-	return 0;
-     }
-
-#ifdef SLANG_POSIX_SIGNALS
-   sigemptyset (&new_mask);
-# ifdef SIGQUIT
-   sigaddset (&new_mask, SIGQUIT);
-# endif
-# ifdef SIGTSTP
-   sigaddset (&new_mask, SIGTSTP);
-# endif
-# ifdef SIGINT
-   sigaddset (&new_mask, SIGINT);
-# endif
-# ifdef SIGTTIN
-   sigaddset (&new_mask, SIGTTIN);
-# endif
-# ifdef SIGTTOU
-   sigaddset (&new_mask, SIGTTOU);
-# endif
-# ifdef SIGWINCH
-   sigaddset (&new_mask, SIGWINCH);
-# endif
-
-   (void) sigprocmask (SIG_BLOCK, &new_mask, &Old_Signal_Mask);
-   return 0;
-#else
-   /* Not implemented. */
-   return -1;
-#endif
-}
-
-int SLsig_unblock_signals (void)
-{
-   if (Blocked_Depth == 0)
-     return -1;
-
-   Blocked_Depth--;
-
-   if (Blocked_Depth != 0)
-     return 0;
-
-#ifdef SLANG_POSIX_SIGNALS
-   (void) sigprocmask (SIG_SETMASK, &Old_Signal_Mask, NULL);
-   return 0;
-#else
-   return -1;
-#endif
-}
-
-#ifdef MSWINDOWS
-int SLsystem (char *cmd)
-{
-   SLang_verror (SL_NOT_IMPLEMENTED, "system not implemented");
-   return -1;
-}
-
-#else
-int SLsystem (char *cmd)
-{
-#ifdef SLANG_POSIX_SIGNALS
-   pid_t pid;
-   int status;
-   struct sigaction ignore;
-# ifdef SIGINT
-   struct sigaction save_intr;
-# endif
-# ifdef SIGQUIT
-   struct sigaction save_quit;
-# endif
-# ifdef SIGCHLD
-   sigset_t child_mask, save_mask;
-# endif
-
-   if (cmd == NULL) return 1;
-
-   ignore.sa_handler = SIG_IGN;
-   sigemptyset (&ignore.sa_mask);
-   ignore.sa_flags = 0;
-
-# ifdef SIGINT
-   if (-1 == sigaction (SIGINT, &ignore, &save_intr))
-     return -1;
-# endif
-
-# ifdef SIGQUIT
-   if (-1 == sigaction (SIGQUIT, &ignore, &save_quit))
-     {
-	(void) sigaction (SIGINT, &save_intr, NULL);
-	return -1;
-     }
-# endif
-
-# ifdef SIGCHLD
-   sigemptyset (&child_mask);
-   sigaddset (&child_mask, SIGCHLD);
-   if (-1 == sigprocmask (SIG_BLOCK, &child_mask, &save_mask))
-     {
-#  ifdef SIGINT
-	(void) sigaction (SIGINT, &save_intr, NULL);
-#  endif
-#  ifdef SIGQUIT
-	(void) sigaction (SIGQUIT, &save_quit, NULL);
-#  endif
-	return -1;
-     }
-# endif
-
-   pid = fork();
-
-   if (pid == -1)
-     status = -1;
-   else if (pid == 0)
-     {
-	/* Child */
-# ifdef SIGINT
-	(void) sigaction (SIGINT, &save_intr, NULL);
-# endif
-# ifdef SIGQUIT
-	(void) sigaction (SIGQUIT, &save_quit, NULL);
-# endif
-# ifdef SIGCHLD
-	(void) sigprocmask (SIG_SETMASK, &save_mask, NULL);
-# endif
-
-	execl ("/bin/sh", "sh", "-c", cmd, NULL);
-	_exit (127);
-     }
-   else
-     {
-	/* parent */
-	while (-1 == waitpid (pid, &status, 0))
-	  {
-# ifdef EINTR
-	     if (errno == EINTR)
-	       continue;
-# endif
-# ifdef ERESTARTSYS
-	     if (errno == ERESTARTSYS)
-	       continue;
-# endif
-	     status = -1;
-	     break;
-	  }
-     }
-# ifdef SIGINT
-   if (-1 == sigaction (SIGINT, &save_intr, NULL))
-     status = -1;
-# endif
-# ifdef SIGQUIT
-   if (-1 == sigaction (SIGQUIT, &save_quit, NULL))
-     status = -1;
-# endif
-# ifdef SIGCHLD
-   if (-1 == sigprocmask (SIG_SETMASK, &save_mask, NULL))
-     status = -1;
-# endif
-
-   return status;
-
-#else				       /* No POSIX Signals */
-# ifdef SIGINT
-   void (*sint)(int);
-# endif
-# ifdef SIGQUIT
-   void (*squit)(int);
-# endif
-   int status;
-
-# ifdef SIGQUIT
-   squit = SLsignal (SIGQUIT, SIG_IGN);
-# endif
-# ifdef SIGINT
-   sint = SLsignal (SIGINT, SIG_IGN);
-# endif
-   status = system (cmd);
-# ifdef SIGINT
-   SLsignal (SIGINT, sint);
-# endif
-# ifdef SIGQUIT
-   SLsignal (SIGQUIT, squit);
-# endif
-   return status;
-#endif				       /* POSIX_SIGNALS */
-}
-#endif
-
-#if 0
-#include <windows.h>
-static int msw_system (char *cmd)
-{
-   STARTUPINFO startup_info;
-   PROCESS_INFORMATION process_info;
-   int status;
-
-   if (cmd == NULL) return -1;
-
-   memset ((char *) &startup_info, 0, sizeof (STARTUPINFO));
-   startup_info.cb = sizeof(STARTUPINFO);
-   startup_info.dwFlags = STARTF_USESHOWWINDOW;
-   startup_info.wShowWindow = SW_SHOWDEFAULT;
-
-   if (FALSE == CreateProcess (NULL,
-			       cmd,
-			       NULL,
-			       NULL,
-			       FALSE,
-			       NORMAL_PRIORITY_CLASS|CREATE_NEW_CONSOLE,
-			       NULL,
-			       NULL,
-			       &startup_info,
-			       &process_info))
-     {
-	SLang_verror (0, "%s: CreateProcess failed.", cmd);
-	return -1;
-     }
-
-   status = -1;
-
-   if (0xFFFFFFFFUL != WaitForSingleObject (process_info.hProcess, INFINITE))
-     {
-	DWORD exit_code;
-
-	if (TRUE == GetExitCodeProcess (process_info.hProcess, &exit_code))
-	  status = (int) exit_code;
-     }
-
-   CloseHandle (process_info.hThread);
-   CloseHandle (process_info.hProcess);
-
-   return status;
-}
-#endif
diff --git a/mdk-stage1/slang/slsmg.c b/mdk-stage1/slang/slsmg.c
deleted file mode 100644
index 088557f27..000000000
--- a/mdk-stage1/slang/slsmg.c
+++ /dev/null
@@ -1,1584 +0,0 @@
-/* SLang Screen management routines */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct Screen_Type
-  {
-     int n;                    /* number of chars written last time */
-     int flags;                /* line untouched, etc... */
-     SLsmg_Char_Type *old, *neew;
-#ifndef IBMPC_SYSTEM
-     unsigned long old_hash, new_hash;
-#endif
-  }
-Screen_Type;
-
-#define TOUCHED 0x1
-#define TRASHED 0x2
-static int Screen_Trashed;
-
-#if !defined(__MSDOS_16BIT__)
-# define MAX_SCREEN_SIZE 256
-#else
-# define MAX_SCREEN_SIZE 75
-#endif
-
-Screen_Type SL_Screen[MAX_SCREEN_SIZE];
-static int Start_Col, Start_Row;
-static int Screen_Cols, Screen_Rows;
-static int This_Row, This_Col;
-static int This_Color;		       /* only the first 8 bits of this
-					* are used.  The highest bit is used
-					* to indicate an alternate character
-					* set.  This leaves 127 userdefineable
-					* color combination.
-					*/
-
-#ifndef IBMPC_SYSTEM
-#define ALT_CHAR_FLAG 0x80
-#else
-#define ALT_CHAR_FLAG 0x00
-#endif
-
-#if SLTT_HAS_NON_BCE_SUPPORT && !defined(IBMPC_SYSTEM)
-#define REQUIRES_NON_BCE_SUPPORT 1
-static int Bce_Color_Offset;
-#endif
-
-int SLsmg_Newline_Behavior = 0;
-int SLsmg_Backspace_Moves = 0;
-/* Backward compatibility. Not used. */
-/* int SLsmg_Newline_Moves; */
-
-static void (*tt_normal_video)(void) = SLtt_normal_video;
-static void (*tt_goto_rc)(int, int) = SLtt_goto_rc;
-static void (*tt_cls) (void) = SLtt_cls;
-static void (*tt_del_eol) (void) = SLtt_del_eol;
-static void (*tt_smart_puts) (SLsmg_Char_Type *, SLsmg_Char_Type *, int, int) = SLtt_smart_puts;
-static int (*tt_flush_output) (void) = SLtt_flush_output;
-static int (*tt_reset_video) (void) = SLtt_reset_video;
-static int (*tt_init_video) (void) = SLtt_init_video;
-static int *tt_Screen_Rows = &SLtt_Screen_Rows;
-static int *tt_Screen_Cols = &SLtt_Screen_Cols;
-
-#ifndef IBMPC_SYSTEM
-static void (*tt_set_scroll_region)(int, int) = SLtt_set_scroll_region;
-static void (*tt_reverse_index)(int) = SLtt_reverse_index;
-static void (*tt_reset_scroll_region)(void) = SLtt_reset_scroll_region;
-static void (*tt_delete_nlines)(int) = SLtt_delete_nlines;
-#endif
-
-#ifndef IBMPC_SYSTEM
-static int *tt_Term_Cannot_Scroll = &SLtt_Term_Cannot_Scroll;
-static int *tt_Has_Alt_Charset = &SLtt_Has_Alt_Charset;
-static char **tt_Graphics_Char_Pairs = &SLtt_Graphics_Char_Pairs;
-static int *tt_Use_Blink_For_ACS = &SLtt_Use_Blink_For_ACS;
-#endif
-
-static int Smg_Inited;
-
-static void blank_line (SLsmg_Char_Type *p, int n, unsigned char ch)
-{
-   register SLsmg_Char_Type *pmax = p + n;
-   register SLsmg_Char_Type color_ch;
-
-   color_ch = SLSMG_BUILD_CHAR(ch,This_Color);
-
-   while (p < pmax)
-     {
-	*p++ = color_ch;
-     }
-}
-
-static void clear_region (int row, int n)
-{
-   int i;
-   int imax = row + n;
-
-   if (imax > Screen_Rows) imax = Screen_Rows;
-   for (i = row; i < imax; i++)
-     {
-	if (i >= 0)
-	  {
-	     blank_line (SL_Screen[i].neew, Screen_Cols, ' ');
-	     SL_Screen[i].flags |= TOUCHED;
-	  }
-     }
-}
-
-void SLsmg_erase_eol (void)
-{
-   int r, c;
-
-   if (Smg_Inited == 0) return;
-
-   c = This_Col - Start_Col;
-   r = This_Row - Start_Row;
-
-   if ((r < 0) || (r >= Screen_Rows)) return;
-   if (c < 0) c = 0; else if (c >= Screen_Cols) return;
-   blank_line (SL_Screen[This_Row].neew + c , Screen_Cols - c, ' ');
-   SL_Screen[This_Row].flags |= TOUCHED;
-}
-
-static void scroll_up (void)
-{
-   unsigned int i, imax;
-   SLsmg_Char_Type *neew;
-
-   neew = SL_Screen[0].neew;
-   imax = Screen_Rows - 1;
-   for (i = 0; i < imax; i++)
-     {
-	SL_Screen[i].neew = SL_Screen[i + 1].neew;
-	SL_Screen[i].flags |= TOUCHED;
-     }
-   SL_Screen[i].neew = neew;
-   SL_Screen[i].flags |= TOUCHED;
-   blank_line (neew, Screen_Cols, ' ');
-   This_Row--;
-}
-
-void SLsmg_gotorc (int r, int c)
-{
-   This_Row = r;
-   This_Col = c;
-}
-
-int SLsmg_get_row (void)
-{
-   return This_Row;
-}
-
-int SLsmg_get_column (void)
-{
-   return This_Col;
-}
-
-void SLsmg_erase_eos (void)
-{
-   if (Smg_Inited == 0) return;
-
-   SLsmg_erase_eol ();
-   clear_region (This_Row + 1, Screen_Rows);
-}
-
-static int This_Alt_Char;
-
-void SLsmg_set_char_set (int i)
-{
-#ifdef IBMPC_SYSTEM
-   (void) i;
-#else
-   if ((tt_Use_Blink_For_ACS != NULL)
-       && (*tt_Use_Blink_For_ACS != 0))
-     return;/* alt chars not used and the alt bit
-	     * is used to indicate a blink.
-	     */
-
-   if (i) This_Alt_Char = ALT_CHAR_FLAG;
-   else This_Alt_Char = 0;
-
-   This_Color &= 0x7F;
-   This_Color |= This_Alt_Char;
-#endif
-}
-
-void SLsmg_set_color (int color)
-{
-   if (color < 0) return;
-#ifdef REQUIRES_NON_BCE_SUPPORT
-   color += Bce_Color_Offset;
-#endif
-   This_Color = color | This_Alt_Char;
-}
-
-void SLsmg_reverse_video (void)
-{
-   SLsmg_set_color (1);
-}
-
-void SLsmg_normal_video (void)
-{
-   SLsmg_set_color (0);
-}
-
-static int point_visible (int col_too)
-{
-   return ((This_Row >= Start_Row) && (This_Row < Start_Row + Screen_Rows)
-	   && ((col_too == 0)
-	       || ((This_Col >= Start_Col)
-		   && (This_Col < Start_Col + Screen_Cols))));
-}
-
-void SLsmg_write_string (char *str)
-{
-   SLsmg_write_nchars (str, strlen (str));
-}
-
-void SLsmg_write_nstring (char *str, unsigned int n)
-{
-   unsigned int width;
-   char blank = ' ';
-
-   /* Avoid a problem if a user accidently passes a negative value */
-   if ((int) n < 0)
-     return;
-
-   if (str == NULL) width = 0;
-   else
-     {
-	width = strlen (str);
-	if (width > n) width = n;
-	SLsmg_write_nchars (str, width);
-     }
-   while (width++ < n) SLsmg_write_nchars (&blank, 1);
-}
-
-void SLsmg_write_wrapped_string (char *s, int r, int c,
-				 unsigned int dr, unsigned int dc,
-				 int fill)
-{
-   register char ch, *p;
-   int maxc = (int) dc;
-
-   if ((dr == 0) || (dc == 0)) return;
-   p = s;
-   dc = 0;
-   while (1)
-     {
-	ch = *p++;
-	if ((ch == 0) || (ch == '\n'))
-	  {
-	     int diff;
-
-	     diff = maxc - (int) dc;
-
-	     SLsmg_gotorc (r, c);
-	     SLsmg_write_nchars (s, dc);
-	     if (fill && (diff > 0))
-	       {
-		  while (diff--) SLsmg_write_char (' ');
-	       }
-	     if ((ch == 0) || (dr == 1)) break;
-
-	     r++;
-	     dc = 0;
-	     dr--;
-	     s = p;
-	  }
-	else if ((int) dc == maxc)
-	  {
-	     SLsmg_gotorc (r, c);
-	     SLsmg_write_nchars (s, dc + 1);
-	     if (dr == 1) break;
-
-	     r++;
-	     dc = 0;
-	     dr--;
-	     s = p;
-	  }
-	else dc++;
-     }
-}
-
-int SLsmg_Tab_Width = 8;
-
-/* Minimum value for which eight bit char is displayed as is. */
-
-#ifndef IBMPC_SYSTEM
-int SLsmg_Display_Eight_Bit = 160;
-static unsigned char Alt_Char_Set[129];/* 129th is used as a flag */
-#else
-int SLsmg_Display_Eight_Bit = 128;
-#endif
-
-void SLsmg_write_nchars (char *str, unsigned int n)
-{
-   register SLsmg_Char_Type *p, old, neew, color;
-   unsigned char ch;
-   unsigned int flags;
-   int len, start_len, max_len;
-   char *str_max;
-   int newline_flag;
-#ifndef IBMPC_SYSTEM
-   int alt_char_set_flag;
-
-   alt_char_set_flag = ((This_Color & ALT_CHAR_FLAG)
-			&& ((tt_Use_Blink_For_ACS == NULL)
-			    || (*tt_Use_Blink_For_ACS == 0)));
-#endif
-
-   if (Smg_Inited == 0) return;
-
-   str_max = str + n;
-   color = This_Color;
-
-   top:				       /* get here only on newline */
-
-   newline_flag = 0;
-   start_len = Start_Col;
-
-   if (point_visible (0) == 0) return;
-
-   len = This_Col;
-   max_len = start_len + Screen_Cols;
-
-   p = SL_Screen[This_Row - Start_Row].neew;
-   if (len > start_len) p += (len - start_len);
-
-   flags = SL_Screen[This_Row - Start_Row].flags;
-   while ((len < max_len) && (str < str_max))
-     {
-	ch = (unsigned char) *str++;
-
-#ifndef IBMPC_SYSTEM
-	if (alt_char_set_flag)
-	  ch = Alt_Char_Set [ch & 0x7F];
-#endif
-	if (((ch >= ' ') && (ch < 127))
-	    || (ch >= (unsigned char) SLsmg_Display_Eight_Bit)
-#ifndef IBMPC_SYSTEM
-	    || alt_char_set_flag
-#endif
-	    )
-	  {
-	     len += 1;
-	     if (len > start_len)
-	       {
-		  old = *p;
-		  neew = SLSMG_BUILD_CHAR(ch,color);
-		  if (old != neew)
-		    {
-		       flags |= TOUCHED;
-		       *p = neew;
-		    }
-		  p++;
-	       }
-	  }
-
-	else if ((ch == '\t') && (SLsmg_Tab_Width > 0))
-	  {
-	     n = len;
-	     n += SLsmg_Tab_Width;
-	     n = SLsmg_Tab_Width - (n % SLsmg_Tab_Width);
-	     if ((unsigned int) len + n > (unsigned int) max_len)
-	       n = (unsigned int) (max_len - len);
-	     neew = SLSMG_BUILD_CHAR(' ',color);
-	     while (n--)
-	       {
-		  len += 1;
-		  if (len > start_len)
-		    {
-		       if (*p != neew)
-			 {
-			    flags |= TOUCHED;
-			    *p = neew;
-			 }
-		       p++;
-		    }
-	       }
-	  }
-	else if ((ch == '\n')
-		 && (SLsmg_Newline_Behavior != SLSMG_NEWLINE_PRINTABLE))
-	  {
-	     newline_flag = 1;
-	     break;
-	  }
-	else if ((ch == 0x8) && SLsmg_Backspace_Moves)
-	  {
-	     if (len != 0) len--;
-	  }
-	else
-	  {
-	     if (ch & 0x80)
-	       {
-		  neew = SLSMG_BUILD_CHAR('~',color);
-		  len += 1;
-		  if (len > start_len)
-		    {
-		       if (*p != neew)
-			 {
-			    *p = neew;
-			    flags |= TOUCHED;
-			 }
-		       p++;
-		       if (len == max_len) break;
-		       ch &= 0x7F;
-		    }
-	       }
-
-	     len += 1;
-	     if (len > start_len)
-	       {
-		  neew = SLSMG_BUILD_CHAR('^',color);
-		  if (*p != neew)
-		    {
-		       *p = neew;
-		       flags |= TOUCHED;
-		    }
-		  p++;
-		  if (len == max_len) break;
-	       }
-
-	     if (ch == 127) ch = '?'; else ch = ch + '@';
-	     len++;
-	     if (len > start_len)
-	       {
-		  neew = SLSMG_BUILD_CHAR(ch,color);
-		  if (*p != neew)
-		    {
-		       *p = neew;
-		       flags |= TOUCHED;
-		    }
-		  p++;
-	       }
-	  }
-     }
-
-   SL_Screen[This_Row - Start_Row].flags = flags;
-   This_Col = len;
-
-   if (SLsmg_Newline_Behavior == 0)
-     return;
-
-   if (newline_flag == 0)
-     {
-	while (str < str_max)
-	  {
-	     if (*str == '\n') break;
-	     str++;
-	  }
-	if (str == str_max) return;
-	str++;
-     }
-
-   This_Row++;
-   This_Col = 0;
-   if (This_Row == Start_Row + Screen_Rows)
-     {
-	if (SLsmg_Newline_Behavior == SLSMG_NEWLINE_SCROLLS) scroll_up ();
-     }
-   goto top;
-}
-
-void SLsmg_write_char (char ch)
-{
-   SLsmg_write_nchars (&ch, 1);
-}
-
-static int Cls_Flag;
-
-void SLsmg_cls (void)
-{
-   int tac;
-   if (Smg_Inited == 0) return;
-
-   tac = This_Alt_Char; This_Alt_Char = 0;
-   SLsmg_set_color (0);
-   clear_region (0, Screen_Rows);
-   This_Alt_Char = tac;
-   SLsmg_set_color (0);
-   Cls_Flag = 1;
-}
-#if 0
-static void do_copy (SLsmg_Char_Type *a, SLsmg_Char_Type *b)
-{
-   SLsmg_Char_Type *amax = a + Screen_Cols;
-
-   while (a < amax) *a++ = *b++;
-}
-#endif
-
-#ifndef IBMPC_SYSTEM
-int SLsmg_Scroll_Hash_Border = 0;
-static unsigned long compute_hash (SLsmg_Char_Type *s, int n)
-{
-   register unsigned long h = 0, g;
-   register unsigned long sum = 0;
-   register SLsmg_Char_Type *smax, ch;
-   int is_blank = 2;
-
-   s += SLsmg_Scroll_Hash_Border;
-   smax = s + (n - SLsmg_Scroll_Hash_Border);
-   while (s < smax)
-     {
-	ch = *s++;
-	if (is_blank && (SLSMG_EXTRACT_CHAR(ch) != 32)) is_blank--;
-
-	sum += ch;
-
-	h = sum + (h << 3);
-	if ((g = h & 0xE0000000UL) != 0)
-	  {
-	     h = h ^ (g >> 24);
-	     h = h ^ g;
-	  }
-     }
-   if (is_blank) return 0;
-   return h;
-}
-
-static unsigned long Blank_Hash;
-
-static int try_scroll_down (int rmin, int rmax)
-{
-   int i, r1, r2, di, j;
-   unsigned long hash;
-   int did_scroll;
-   int color;
-   SLsmg_Char_Type *tmp;
-   int ignore;
-
-   did_scroll = 0;
-   for (i = rmax; i > rmin; i--)
-     {
-	hash = SL_Screen[i].new_hash;
-	if (hash == Blank_Hash) continue;
-
-	if ((hash == SL_Screen[i].old_hash)
-#if 0
-	    || ((i + 1 < Screen_Rows) && (hash == SL_Screen[i + 1].old_hash))
-	    || ((i - 1 > rmin) && (SL_Screen[i].old_hash == SL_Screen[i - 1].new_hash))
-#endif
-	    )
-	  continue;
-
-	for (j = i - 1; j >= rmin; j--)
-	  {
-	     if (hash == SL_Screen[j].old_hash) break;
-	  }
-	if (j < rmin) continue;
-
-	r2 = i;			       /* end scroll region */
-
-	di = i - j;
-	j--;
-	ignore = 0;
-	while ((j >= rmin) && (SL_Screen[j].old_hash == SL_Screen[j + di].new_hash))
-	  {
-	     if (SL_Screen[j].old_hash == Blank_Hash) ignore++;
-	     j--;
-	  }
-	r1 = j + 1;
-
-	/* If this scroll only scrolls this line into place, don't do it.
-	 */
-	if ((di > 1) && (r1 + di + ignore == r2)) continue;
-
-	/* If there is anything in the scrolling region that is ok, abort the
-	 * scroll.
-	 */
-
-	for (j = r1; j <= r2; j++)
-	  {
-	     if ((SL_Screen[j].old_hash != Blank_Hash)
-		 && (SL_Screen[j].old_hash == SL_Screen[j].new_hash))
-	       {
-		  /* See if the scroll is happens to scroll this one into place. */
-		  if ((j + di > r2) || (SL_Screen[j].old_hash != SL_Screen[j + di].new_hash))
-		    break;
-	       }
-	  }
-	if (j <= r2) continue;
-
-	color = This_Color;  This_Color = 0;
-	did_scroll = 1;
-	(*tt_normal_video) ();
-	(*tt_set_scroll_region) (r1, r2);
-	(*tt_goto_rc) (0, 0);
-	(*tt_reverse_index) (di);
-	(*tt_reset_scroll_region) ();
-	/* Now we have a hole in the screen.
-	 * Make the virtual screen look like it.
-	 * 
-	 * Note that if the terminal does not support BCE, then we have
-	 * no idea what color the hole is.  So, for this case, we do not
-	 * want to add Bce_Color_Offset to This_Color since if Bce_Color_Offset
-	 * is non-zero, then This_Color = 0 does not match any valid color
-	 * obtained by adding Bce_Color_Offset.
-	 */
-	for (j = r1; j <= r2; j++) SL_Screen[j].flags = TOUCHED;
-
-	while (di--)
-	  {
-	     tmp = SL_Screen[r2].old;
-	     for (j = r2; j > r1; j--)
-	       {
-		  SL_Screen[j].old = SL_Screen[j - 1].old;
-		  SL_Screen[j].old_hash = SL_Screen[j - 1].old_hash;
-	       }
-	     SL_Screen[r1].old = tmp;
-	     blank_line (SL_Screen[r1].old, Screen_Cols, ' ');
-	     SL_Screen[r1].old_hash = Blank_Hash;
-	     r1++;
-	  }
-	This_Color = color;
-     }
-
-   return did_scroll;
-}
-
-static int try_scroll_up (int rmin, int rmax)
-{
-   int i, r1, r2, di, j;
-   unsigned long hash;
-   int did_scroll;
-   int color;
-   SLsmg_Char_Type *tmp;
-   int ignore;
-
-   did_scroll = 0;
-   for (i = rmin; i < rmax; i++)
-     {
-	hash = SL_Screen[i].new_hash;
-	if (hash == Blank_Hash) continue;
-	if (hash == SL_Screen[i].old_hash)
-	  continue;
-	/* find a match further down screen */
-	for (j = i + 1; j <= rmax; j++)
-	  {
-	     if (hash == SL_Screen[j].old_hash) break;
-	  }
-	if (j > rmax) continue;
-
-	r1 = i;			       /* beg scroll region */
-	di = j - i;		       /* number of lines to scroll */
-	j++;			       /* since we know this is a match */
-
-	/* find end of scroll region */
-	ignore = 0;
-	while ((j <= rmax) && (SL_Screen[j].old_hash == SL_Screen[j - di].new_hash))
-	  {
-	     if (SL_Screen[j].old_hash == Blank_Hash) ignore++;
-	     j++;
-	  }
-	r2 = j - 1;		       /* end of scroll region */
-
-	/* If this scroll only scrolls this line into place, don't do it.
-	 */
-	if ((di > 1) && (r1 + di + ignore == r2)) continue;
-
-	/* If there is anything in the scrolling region that is ok, abort the
-	 * scroll.
-	 */
-
-	for (j = r1; j <= r2; j++)
-	  {
-	     if ((SL_Screen[j].old_hash != Blank_Hash)
-		 && (SL_Screen[j].old_hash == SL_Screen[j].new_hash))
-	       {
-		  if ((j - di < r1) || (SL_Screen[j].old_hash != SL_Screen[j - di].new_hash))
-		    break;
-	       }
-
-	  }
-	if (j <= r2) continue;
-
-	did_scroll = 1;
-
-	/* See the above comments about BCE */
-	color = This_Color;  This_Color = 0;
-	(*tt_normal_video) ();
-	(*tt_set_scroll_region) (r1, r2);
-	(*tt_goto_rc) (0, 0);	       /* relative to scroll region */
-	(*tt_delete_nlines) (di);
-	(*tt_reset_scroll_region) ();
-	/* Now we have a hole in the screen.  Make the virtual screen look
-	 * like it.
-	 */
-	for (j = r1; j <= r2; j++) SL_Screen[j].flags = TOUCHED;
-
-	while (di--)
-	  {
-	     tmp = SL_Screen[r1].old;
-	     for (j = r1; j < r2; j++)
-	       {
-		  SL_Screen[j].old = SL_Screen[j + 1].old;
-		  SL_Screen[j].old_hash = SL_Screen[j + 1].old_hash;
-	       }
-	     SL_Screen[r2].old = tmp;
-	     blank_line (SL_Screen[r2].old, Screen_Cols, ' ');
-	     SL_Screen[r2].old_hash = Blank_Hash;
-	     r2--;
-	  }
-	This_Color = color;
-     }
-   return did_scroll;
-}
-
-static void try_scroll (void)
-{
-   int r1, rmin, rmax;
-   int num_up, num_down;
-   /* find region limits. */
-
-   for (rmax = Screen_Rows - 1; rmax > 0; rmax--)
-     {
-	if (SL_Screen[rmax].new_hash != SL_Screen[rmax].old_hash)
-	  {
-	     r1 = rmax - 1;
-	     if ((r1 == 0)
-		 || (SL_Screen[r1].new_hash != SL_Screen[r1].old_hash))
-	       break;
-
-	     rmax = r1;
-	  }
-     }
-
-   for (rmin = 0; rmin < rmax; rmin++)
-     {
-	if (SL_Screen[rmin].new_hash != SL_Screen[rmin].old_hash)
-	  {
-	     r1 = rmin + 1;
-	     if ((r1 == rmax)
-		 || (SL_Screen[r1].new_hash != SL_Screen[r1].old_hash))
-	       break;
-
-	     rmin = r1;
-	  }
-     }
-
-   /* Below, we have two scrolling algorithms.  The first has the effect of
-    * scrolling lines down.  This is usually appropriate when one moves
-    * up the display, e.g., with the UP arrow.  The second algorithm is
-    * appropriate for going the other way.  It is important to choose the
-    * correct one.
-    */
-
-   num_up = 0;
-   for (r1 = rmin; r1 < rmax; r1++)
-     {
-	if (SL_Screen[r1].new_hash == SL_Screen[r1 + 1].old_hash)
-	  num_up++;
-     }
-
-   num_down = 0;
-   for (r1 = rmax; r1 > rmin; r1--)
-     {
-	if (SL_Screen[r1 - 1].old_hash == SL_Screen[r1].new_hash)
-	  num_down++;
-     }
-
-   if (num_up > num_down)
-     {
-	if (try_scroll_up (rmin, rmax))
-	  return;
-
-	(void) try_scroll_down (rmin, rmax);
-     }
-   else
-     {
-	if (try_scroll_down (rmin, rmax))
-	  return;
-
-	(void) try_scroll_up (rmin, rmax);
-     }
-}
-#endif   /* NOT IBMPC_SYSTEM */
-
-
-#ifdef REQUIRES_NON_BCE_SUPPORT
-static void adjust_colors (void)
-{
-   int bce;
-   int i;
-
-   bce = Bce_Color_Offset;
-   Bce_Color_Offset = _SLtt_get_bce_color_offset ();
-   if (bce == Bce_Color_Offset)
-     return;
-   
-  if ((tt_Use_Blink_For_ACS != NULL)
-       && (*tt_Use_Blink_For_ACS != 0))
-     return;			       /* this mode does not support non-BCE
-					* terminals.
-					*/
-
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	SLsmg_Char_Type *s, *smax;
-
-	SL_Screen[i].flags |= TRASHED;
-	s = SL_Screen[i].neew;
-	smax = s + Screen_Cols;
-	
-	while (s < smax)
-	  {
-	     int color = (int) SLSMG_EXTRACT_COLOR(*s);
-	     int acs;
-
-	     if (color < 0)
-	       {
-		  s++;
-		  continue;
-	       }
-	     
-	     acs = color & 0x80;
-	     color = (color & 0x7F) - bce;
-	     color += Bce_Color_Offset;
-	     if (color >= 0)
-	       {
-		  unsigned char ch = SLSMG_EXTRACT_CHAR(*s);
-		  *s = SLSMG_BUILD_CHAR(ch, ((color&0x7F)|acs));
-	       }
-	     s++;
-	  }
-     }
-}
-#endif
-
-void SLsmg_refresh (void)
-{
-   int i;
-#ifndef IBMPC_SYSTEM
-   int trashed = 0;
-#endif
-
-   if (Smg_Inited == 0) return;
-   
-   if (Screen_Trashed)
-     {
-	Cls_Flag = 1;
-	for (i = 0; i < Screen_Rows; i++)
-	  SL_Screen[i].flags |= TRASHED;
-#ifdef REQUIRES_NON_BCE_SUPPORT
-	adjust_colors ();
-#endif
-     }
-
-#ifndef IBMPC_SYSTEM
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	if (SL_Screen[i].flags == 0) continue;
-	SL_Screen[i].new_hash = compute_hash (SL_Screen[i].neew, Screen_Cols);
-	trashed = 1;
-     }
-#endif
-
-   if (Cls_Flag)
-     {
-	(*tt_normal_video) ();  (*tt_cls) ();
-     }
-#ifndef IBMPC_SYSTEM
-   else if (trashed && (*tt_Term_Cannot_Scroll == 0)) try_scroll ();
-#endif
-
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	if (SL_Screen[i].flags == 0) continue;
-
-	if (Cls_Flag || SL_Screen[i].flags & TRASHED)
-	  {
-	     int color = This_Color;
-
-	     if (Cls_Flag == 0) 
-	       {
-		  (*tt_goto_rc) (i, 0);
-		  (*tt_del_eol) ();
-	       }
-	     This_Color = 0;
-	     blank_line (SL_Screen[i].old, Screen_Cols, ' ');
-	     This_Color = color;
-	  }
-
-	SL_Screen[i].old[Screen_Cols] = 0;
-	SL_Screen[i].neew[Screen_Cols] = 0;
-
-	(*tt_smart_puts) (SL_Screen[i].neew, SL_Screen[i].old, Screen_Cols, i);
-
-	SLMEMCPY ((char *) SL_Screen[i].old, (char *) SL_Screen[i].neew,
-		  Screen_Cols * sizeof (SLsmg_Char_Type));
-
-	SL_Screen[i].flags = 0;
-#ifndef IBMPC_SYSTEM
-	SL_Screen[i].old_hash = SL_Screen[i].new_hash;
-#endif
-     }
-
-   if (point_visible (1)) (*tt_goto_rc) (This_Row - Start_Row, This_Col - Start_Col);
-   (*tt_flush_output) ();
-   Cls_Flag = 0;
-   Screen_Trashed = 0;
-}
-
-static int compute_clip (int row, int n, int box_start, int box_end,
-			 int *rmin, int *rmax)
-{
-   int row_max;
-
-   if (n < 0) return 0;
-   if (row >= box_end) return 0;
-   row_max = row + n;
-   if (row_max <= box_start) return 0;
-
-   if (row < box_start) row = box_start;
-   if (row_max >= box_end) row_max = box_end;
-   *rmin = row;
-   *rmax = row_max;
-   return 1;
-}
-
-void SLsmg_touch_lines (int row, unsigned int n)
-{
-   int i;
-   int r1, r2;
-
-   /* Allow this function to be called even when we are not initialied.
-    * Calling this function is useful after calling SLtt_set_color
-    * to force the display to be redrawn
-    */
-
-   if (Smg_Inited == 0)
-     return;
-
-   if (0 == compute_clip (row, (int) n, Start_Row, Start_Row + Screen_Rows, &r1, &r2))
-     return;
-
-   r1 -= Start_Row;
-   r2 -= Start_Row;
-   for (i = r1; i < r2; i++)
-     {
-	SL_Screen[i].flags |= TRASHED;
-     }
-}
-
-void SLsmg_touch_screen (void)
-{
-   Screen_Trashed = 1;
-}
-
-			  
-#ifndef IBMPC_SYSTEM
-static char Fake_Alt_Char_Pairs [] = "a:j+k+l+m+q-t+u+v+w+x|n+`+f\\g#~o,<+>.v-^h#0#";
-
-static void init_alt_char_set (void)
-{
-   int i;
-   unsigned char *p, *pmax, ch;
-
-   if (Alt_Char_Set[128] == 128) return;
-
-   i = 32;
-   memset ((char *)Alt_Char_Set, ' ', i);
-   while (i <= 128)
-     {
-	Alt_Char_Set [i] = i;
-	i++;
-     }
-
-   /* Map to VT100 */
-   if (*tt_Has_Alt_Charset)
-     {
-	if (tt_Graphics_Char_Pairs == NULL) p = NULL;
-	else p = (unsigned char *) *tt_Graphics_Char_Pairs;
-	if (p == NULL) return;
-     }
-   else	p = (unsigned char *) Fake_Alt_Char_Pairs;
-   pmax = p + strlen ((char *) p);
-
-   /* Some systems have messed up entries for this */
-   while (p < pmax)
-     {
-	ch = *p++;
-	ch &= 0x7F;		       /* should be unnecessary */
-	Alt_Char_Set [ch] = *p;
-	p++;
-     }
-}
-#endif
-
-#ifndef IBMPC_SYSTEM
-# define BLOCK_SIGNALS SLsig_block_signals ()
-# define UNBLOCK_SIGNALS SLsig_unblock_signals ()
-#else
-# define BLOCK_SIGNALS (void)0
-# define UNBLOCK_SIGNALS (void)0
-#endif
-
-static int Smg_Suspended;
-int SLsmg_suspend_smg (void)
-{
-   BLOCK_SIGNALS;
-
-   if (Smg_Suspended == 0)
-     {
-	(*tt_reset_video) ();
-	Smg_Suspended = 1;
-     }
-
-   UNBLOCK_SIGNALS;
-   return 0;
-}
-
-int SLsmg_resume_smg (void)
-{
-   BLOCK_SIGNALS;
-
-   if (Smg_Suspended == 0)
-     {
-	UNBLOCK_SIGNALS;
-	return 0;
-     }
-
-   Smg_Suspended = 0;
-
-   if (-1 == (*tt_init_video) ())
-     {
-	UNBLOCK_SIGNALS;
-	return -1;
-     }
-
-   Cls_Flag = 1;
-   SLsmg_touch_screen ();
-   SLsmg_refresh ();
-
-   UNBLOCK_SIGNALS;
-   return 0;
-}
-
-   
-static void reset_smg (void)
-{
-   int i;
-   if (Smg_Inited == 0)
-     return;
-
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	SLfree ((char *)SL_Screen[i].old);
-	SLfree ((char *)SL_Screen[i].neew);
-	SL_Screen[i].old = SL_Screen[i].neew = NULL;
-     }
-   This_Alt_Char = This_Color = 0;
-   Smg_Inited = 0;
-}
-
-
-static int init_smg (void)
-{
-   int i, len;
-   SLsmg_Char_Type *old, *neew;
-
-   Smg_Inited = 0;
-
-#ifdef REQUIRES_NON_BCE_SUPPORT
-   Bce_Color_Offset = _SLtt_get_bce_color_offset ();
-#endif
-
-   Screen_Rows = *tt_Screen_Rows;
-   if (Screen_Rows > MAX_SCREEN_SIZE)
-     Screen_Rows = MAX_SCREEN_SIZE;
-
-   Screen_Cols = *tt_Screen_Cols;
-
-   This_Col = This_Row = Start_Col = Start_Row = 0;
-
-   This_Alt_Char = 0;
-   SLsmg_set_color (0);
-   Cls_Flag = 1;
-#ifndef IBMPC_SYSTEM
-   init_alt_char_set ();
-#endif
-   len = Screen_Cols + 3;
-   for (i = 0; i < Screen_Rows; i++)
-     {
-	if ((NULL == (old = (SLsmg_Char_Type *) SLmalloc (sizeof(SLsmg_Char_Type) * len)))
-	    || ((NULL == (neew = (SLsmg_Char_Type *) SLmalloc (sizeof(SLsmg_Char_Type) * len)))))
-	  {
-	     SLfree ((char *) old);
-	     return -1;
-	  }
-	blank_line (old, len, ' ');
-	blank_line (neew, len, ' ');
-	SL_Screen[i].old = old;
-	SL_Screen[i].neew = neew;
-	SL_Screen[i].flags = 0;
-#ifndef IBMPC_SYSTEM
-	Blank_Hash = compute_hash (old, Screen_Cols);
-	SL_Screen[i].new_hash = SL_Screen[i].old_hash =  Blank_Hash;
-#endif
-     }
-   
-   _SLtt_color_changed_hook = SLsmg_touch_screen;
-   Screen_Trashed = 1;
-   Smg_Inited = 1;
-   return 0;
-}
-
-
-int SLsmg_init_smg (void)
-{
-   int ret;
-
-   BLOCK_SIGNALS;
-
-   if (Smg_Inited)
-     SLsmg_reset_smg ();
-
-   if (-1 == (*tt_init_video) ())
-     {
-	UNBLOCK_SIGNALS;
-	return -1;
-     }
-   
-   if (-1 == (ret = init_smg ()))
-     (void) (*tt_reset_video)();
-
-   UNBLOCK_SIGNALS;
-   return ret;
-}
-
-int SLsmg_reinit_smg (void)
-{
-   int ret;
-
-   if (Smg_Inited == 0)
-     return SLsmg_init_smg ();
-
-   BLOCK_SIGNALS;
-   reset_smg ();
-   ret = init_smg ();
-   UNBLOCK_SIGNALS;
-   return ret;
-}
-
-void SLsmg_reset_smg (void)
-{   
-   if (Smg_Inited == 0)
-     return;
-   
-   BLOCK_SIGNALS;
-
-   reset_smg ();
-   (*tt_reset_video)();
-
-   UNBLOCK_SIGNALS;
-}
-
-SLsmg_Char_Type SLsmg_char_at (void)
-{
-   if (Smg_Inited == 0) return 0;
-
-   if (point_visible (1))
-     {
-	return SL_Screen[This_Row - Start_Row].neew[This_Col - Start_Col];
-     }
-   return 0;
-}
-
-void SLsmg_vprintf (char *fmt, va_list ap)
-{
-   char buf[1024];
-
-   if (Smg_Inited == 0) return;
-
-   (void) _SLvsnprintf (buf, sizeof (buf), fmt, ap);
-   SLsmg_write_string (buf);
-}
-
-void SLsmg_printf (char *fmt, ...)
-{
-   va_list ap;
-   unsigned int len;
-   char *f;
-
-   if (Smg_Inited == 0) return;
-
-   va_start(ap, fmt);
-
-   f = fmt;
-   while (*f && (*f != '%'))
-     f++;
-   len = (unsigned int) (f - fmt);
-   if (len) SLsmg_write_nchars (fmt, len);
-
-   if (*f != 0)
-     SLsmg_vprintf (f, ap);
-
-   va_end (ap);
-}
-
-void SLsmg_set_screen_start (int *r, int *c)
-{
-   int orow = Start_Row, oc = Start_Col;
-
-   if (Smg_Inited == 0) return;
-
-   if (c == NULL) Start_Col = 0;
-   else
-     {
-	Start_Col = *c;
-	*c = oc;
-     }
-   if (r == NULL) Start_Row = 0;
-   else
-     {
-	Start_Row = *r;
-	*r = orow;
-     }
-}
-
-void SLsmg_draw_object (int r, int c, unsigned char object)
-{
-   This_Row = r;  This_Col = c;
-
-   if (Smg_Inited == 0) return;
-
-   if (point_visible (1))
-     {
-	int color = This_Color;
-	This_Color |= ALT_CHAR_FLAG;
-	SLsmg_write_char (object);
-	This_Color = color;
-     }
-
-   This_Col = c + 1;
-}
-
-void SLsmg_draw_hline (unsigned int n)
-{
-   static unsigned char hbuf[16];
-   int count;
-   int cmin, cmax;
-   int final_col = This_Col + (int) n;
-   int save_color;
-
-   if (Smg_Inited == 0) return;
-
-   if ((This_Row < Start_Row) || (This_Row >= Start_Row + Screen_Rows)
-       || (0 == compute_clip (This_Col, n, Start_Col, Start_Col + Screen_Cols,
-			      &cmin, &cmax)))
-     {
-	This_Col = final_col;
-	return;
-     }
-
-   if (hbuf[0] == 0)
-     {
-	SLMEMSET ((char *) hbuf, SLSMG_HLINE_CHAR, 16);
-     }
-
-   n = (unsigned int)(cmax - cmin);
-   count = n / 16;
-
-   save_color = This_Color;
-   This_Color |= ALT_CHAR_FLAG;
-   This_Col = cmin;
-
-   SLsmg_write_nchars ((char *) hbuf, n % 16);
-   while (count-- > 0)
-     {
-	SLsmg_write_nchars ((char *) hbuf, 16);
-     }
-
-   This_Color = save_color;
-   This_Col = final_col;
-}
-
-void SLsmg_draw_vline (int n)
-{
-   unsigned char ch = SLSMG_VLINE_CHAR;
-   int c = This_Col, rmin, rmax;
-   int final_row = This_Row + n;
-   int save_color;
-
-   if (Smg_Inited == 0) return;
-
-   if (((c < Start_Col) || (c >= Start_Col + Screen_Cols)) ||
-       (0 == compute_clip (This_Row, n, Start_Row, Start_Row + Screen_Rows,
-			  &rmin, &rmax)))
-     {
-	This_Row = final_row;
-	return;
-     }
-
-   save_color = This_Color;
-   This_Color |= ALT_CHAR_FLAG;
-
-   for (This_Row = rmin; This_Row < rmax; This_Row++)
-     {
-	This_Col = c;
-	SLsmg_write_nchars ((char *) &ch, 1);
-     }
-
-   This_Col = c;  This_Row = final_row;
-   This_Color = save_color;
-}
-
-void SLsmg_draw_box (int r, int c, unsigned int dr, unsigned int dc)
-{
-   if (Smg_Inited == 0) return;
-
-   if (!dr || !dc) return;
-   This_Row = r;  This_Col = c;
-   dr--; dc--;
-   SLsmg_draw_hline (dc);
-   SLsmg_draw_vline (dr);
-   This_Row = r;  This_Col = c;
-   SLsmg_draw_vline (dr);
-   SLsmg_draw_hline (dc);
-   SLsmg_draw_object (r, c, SLSMG_ULCORN_CHAR);
-   SLsmg_draw_object (r, c + (int) dc, SLSMG_URCORN_CHAR);
-   SLsmg_draw_object (r + (int) dr, c, SLSMG_LLCORN_CHAR);
-   SLsmg_draw_object (r + (int) dr, c + (int) dc, SLSMG_LRCORN_CHAR);
-   This_Row = r; This_Col = c;
-}
-
-void SLsmg_fill_region (int r, int c, unsigned int dr, unsigned int dc, unsigned char ch)
-{
-   static unsigned char hbuf[16];
-   int count;
-   int dcmax, rmax;
-
-   if (Smg_Inited == 0) return;
-
-   SLsmg_gotorc (r, c);
-   r = This_Row; c = This_Col;
-
-   dcmax = Screen_Cols - This_Col;
-   if (dcmax < 0)
-     return;
-
-   if (dc > (unsigned int) dcmax) dc = (unsigned int) dcmax;
-
-   rmax = This_Row + dr;
-   if (rmax > Screen_Rows) rmax = Screen_Rows;
-
-#if 0
-   ch = Alt_Char_Set[ch];
-#endif
-   if (ch != hbuf[0]) SLMEMSET ((char *) hbuf, (char) ch, 16);
-
-   for (This_Row = r; This_Row < rmax; This_Row++)
-     {
-	This_Col = c;
-	count = dc / 16;
-	SLsmg_write_nchars ((char *) hbuf, dc % 16);
-	while (count-- > 0)
-	  {
-	     SLsmg_write_nchars ((char *) hbuf, 16);
-	  }
-     }
-
-   This_Row = r;
-}
-
-void SLsmg_forward (int n)
-{
-   This_Col += n;
-}
-
-void SLsmg_write_color_chars (SLsmg_Char_Type *s, unsigned int len)
-{
-   SLsmg_Char_Type *smax, sh;
-   char buf[32], *b, *bmax;
-   int color, save_color;
-
-   if (Smg_Inited == 0) return;
-
-   smax = s + len;
-   b = buf;
-   bmax = b + sizeof (buf);
-
-   save_color = This_Color;
-
-   while (s < smax)
-     {
-	sh = *s++;
-
-	color = SLSMG_EXTRACT_COLOR(sh);
-
-#if REQUIRES_NON_BCE_SUPPORT
-	if (Bce_Color_Offset)
-	  {
-	     if (color & 0x80)
-	       color = ((color & 0x7F) + Bce_Color_Offset) | 0x80;
-	     else
-	       color = ((color & 0x7F) + Bce_Color_Offset) & 0x7F;
-	  }
-#endif
-
-	if ((color != This_Color) || (b == bmax))
-	  {
-	     if (b != buf)
-	       {
-		  SLsmg_write_nchars (buf, (int) (b - buf));
-		  b = buf;
-	       }
-	     This_Color = color;
-	  }
-	*b++ = (char) SLSMG_EXTRACT_CHAR(sh);
-     }
-
-   if (b != buf)
-     SLsmg_write_nchars (buf, (unsigned int) (b - buf));
-
-   This_Color = save_color;
-}
-
-unsigned int SLsmg_read_raw (SLsmg_Char_Type *buf, unsigned int len)
-{
-   unsigned int r, c;
-
-   if (Smg_Inited == 0) return 0;
-
-   if (0 == point_visible (1)) return 0;
-
-   r = (unsigned int) (This_Row - Start_Row);
-   c = (unsigned int) (This_Col - Start_Col);
-
-   if (c + len > (unsigned int) Screen_Cols)
-     len = (unsigned int) Screen_Cols - c;
-
-   memcpy ((char *) buf, (char *) (SL_Screen[r].neew + c), len * sizeof (SLsmg_Char_Type));
-   return len;
-}
-
-unsigned int SLsmg_write_raw (SLsmg_Char_Type *buf, unsigned int len)
-{
-   unsigned int r, c;
-   SLsmg_Char_Type *dest;
-
-   if (Smg_Inited == 0) return 0;
-
-   if (0 == point_visible (1)) return 0;
-
-   r = (unsigned int) (This_Row - Start_Row);
-   c = (unsigned int) (This_Col - Start_Col);
-
-   if (c + len > (unsigned int) Screen_Cols)
-     len = (unsigned int) Screen_Cols - c;
-
-   dest = SL_Screen[r].neew + c;
-
-   if (0 != memcmp ((char *) dest, (char *) buf, len * sizeof (SLsmg_Char_Type)))
-     {
-	memcpy ((char *) dest, (char *) buf, len * sizeof (SLsmg_Char_Type));
-	SL_Screen[r].flags |= TOUCHED;
-     }
-   return len;
-}
-
-void
-SLsmg_set_color_in_region (int color, int r, int c, unsigned int dr, unsigned int dc)
-{
-   int cmax, rmax;
-   SLsmg_Char_Type char_mask;
-
-   if (Smg_Inited == 0) return;
-
-   c -= Start_Col;
-   r -= Start_Row;
-
-   cmax = c + (int) dc;
-   rmax = r + (int) dr;
-
-   if (cmax > Screen_Cols) cmax = Screen_Cols;
-   if (rmax > Screen_Rows) rmax = Screen_Rows;
-
-   if (c < 0) c = 0;
-   if (r < 0) r = 0;
-
-#if REQUIRES_NON_BCE_SUPPORT
-   if (Bce_Color_Offset)
-     {
-	if (color & 0x80)
-	  color = ((color & 0x7F) + Bce_Color_Offset) | 0x80;
-	else
-	  color = ((color & 0x7F) + Bce_Color_Offset) & 0x7F;
-     }
-#endif
-   color = color << 8;
-
-   char_mask = 0xFF;
-
-#ifndef IBMPC_SYSTEM
-   if ((tt_Use_Blink_For_ACS == NULL)
-       || (0 == *tt_Use_Blink_For_ACS))
-     char_mask = 0x80FF;
-#endif
-
-   while (r < rmax)
-     {
-	SLsmg_Char_Type *s, *smax;
-
-	SL_Screen[r].flags |= TOUCHED;
-	s = SL_Screen[r].neew;
-	smax = s + cmax;
-	s += c;
-
-	while (s < smax)
-	  {
-	     *s = (*s & char_mask) | color;
-	     s++;
-	  }
-	r++;
-     }
-}
-
-void SLsmg_set_terminal_info (SLsmg_Term_Type *tt)
-{
-   if (tt == NULL)		       /* use default */
-     return;
-
-   if ((tt->tt_normal_video == NULL)
-       || (tt->tt_goto_rc == NULL)
-       || (tt->tt_cls == NULL)
-       || (tt->tt_del_eol == NULL)
-       || (tt->tt_smart_puts == NULL)
-       || (tt->tt_flush_output == NULL)
-       || (tt->tt_reset_video == NULL)
-       || (tt->tt_init_video == NULL)
-#ifndef IBMPC_SYSTEM
-       || (tt->tt_set_scroll_region == NULL)
-       || (tt->tt_reverse_index == NULL)
-       || (tt->tt_reset_scroll_region == NULL)
-       || (tt->tt_delete_nlines == NULL)
-       /* Variables */
-       || (tt->tt_term_cannot_scroll == NULL)
-       || (tt->tt_has_alt_charset == NULL)
-#if 0 /* These can be NULL */
-       || (tt->tt_use_blink_for_acs == NULL)
-       || (tt->tt_graphic_char_pairs == NULL)
-#endif
-       || (tt->tt_screen_cols == NULL)
-       || (tt->tt_screen_rows == NULL)
-#endif
-       )
-     SLang_exit_error ("Terminal not powerful enough for SLsmg");
-
-   tt_normal_video = tt->tt_normal_video;
-   tt_goto_rc = tt->tt_goto_rc;
-   tt_cls = tt->tt_cls;
-   tt_del_eol = tt->tt_del_eol;
-   tt_smart_puts = tt->tt_smart_puts;
-   tt_flush_output = tt->tt_flush_output;
-   tt_reset_video = tt->tt_reset_video;
-   tt_init_video = tt->tt_init_video;
-
-#ifndef IBMPC_SYSTEM
-   tt_set_scroll_region = tt->tt_set_scroll_region;
-   tt_reverse_index = tt->tt_reverse_index;
-   tt_reset_scroll_region = tt->tt_reset_scroll_region;
-   tt_delete_nlines = tt->tt_delete_nlines;
-
-   tt_Term_Cannot_Scroll = tt->tt_term_cannot_scroll;
-   tt_Has_Alt_Charset = tt->tt_has_alt_charset;
-   tt_Use_Blink_For_ACS = tt->tt_use_blink_for_acs;
-   tt_Graphics_Char_Pairs = tt->tt_graphic_char_pairs;
-#endif
-
-   tt_Screen_Cols = tt->tt_screen_cols;
-   tt_Screen_Rows = tt->tt_screen_rows;
-}
-
diff --git a/mdk-stage1/slang/slstd.c b/mdk-stage1/slang/slstd.c
deleted file mode 100644
index b05dfcddb..000000000
--- a/mdk-stage1/slang/slstd.c
+++ /dev/null
@@ -1,724 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* Standard intrinsic functions for S-Lang.  Included here are string
-   and array operations */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-/*{{{ Include Files */
-
-#include <time.h>
-
-#ifndef __QNX__
-# if defined(__GO32__) || defined(__WATCOMC__)
-#  include <dos.h>
-#  include <bios.h>
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*}}}*/
-
-/* builtin stack manipulation functions */
-int SLdo_pop(void) /*{{{*/
-{
-   return SLdo_pop_n (1);
-}
-
-/*}}}*/
-
-int SLdo_pop_n (unsigned int n)
-{
-   SLang_Object_Type x;
-
-   while (n--)
-     {
-	if (SLang_pop(&x)) return -1;
-	SLang_free_object (&x);
-     }
-
-   return 0;
-}
-
-static void do_dup(void) /*{{{*/
-{
-   (void) SLdup_n (1);
-}
-
-/*}}}*/
-
-static int length_cmd (void)
-{
-   SLang_Class_Type *cl;
-   SLang_Object_Type obj;
-   VOID_STAR p;
-   unsigned int length;
-   int len;
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-
-   cl = _SLclass_get_class (obj.data_type);
-   p = _SLclass_get_ptr_to_value (cl, &obj);
-
-   len = 1;
-   if (cl->cl_length != NULL)
-     {
-	if (0 == (*cl->cl_length)(obj.data_type, p, &length))
-	  len = (int) length;
-	else
-	  len = -1;
-     }
-
-   SLang_free_object (&obj);
-   return len;
-}
-
-/* convert integer to a string of length 1 */
-static void char_cmd (int *x) /*{{{*/
-{
-   char ch, buf[2];
-
-   ch = (char) *x;
-   buf[0] = ch;
-   buf[1] = 0;
-   SLang_push_string (buf);
-}
-
-/*}}}*/
-
-/* format object into a string and returns slstring */
-char *_SLstringize_object (SLang_Object_Type *obj) /*{{{*/
-{
-   SLang_Class_Type *cl;
-   unsigned char stype;
-   VOID_STAR p;
-   char *s, *s1;
-
-   stype = obj->data_type;
-   p = (VOID_STAR) &obj->v.ptr_val;
-
-   cl = _SLclass_get_class (stype);
-
-   s = (*cl->cl_string) (stype, p);
-   if (s != NULL)
-     {
-	s1 = SLang_create_slstring (s);
-	SLfree (s);
-	s = s1;
-     }
-   return s;
-}
-/*}}}*/
-
-int SLang_run_hooks(char *hook, unsigned int num_args, ...)
-{
-   unsigned int i;
-   va_list ap;
-
-   if (SLang_Error) return -1;
-
-   if (0 == SLang_is_defined (hook))
-     return 0;
-
-   (void) SLang_start_arg_list ();
-   va_start (ap, num_args);
-   for (i = 0; i < num_args; i++)
-     {
-	char *arg;
-
-	arg = va_arg (ap, char *);
-	if (-1 == SLang_push_string (arg))
-	  break;
-     }
-   va_end (ap);
-   (void) SLang_end_arg_list ();
-
-   if (SLang_Error) return -1;
-   return SLang_execute_function (hook);
-}
-
-static void intrin_getenv_cmd (char *s)
-{
-   SLang_push_string (getenv (s));
-}
-
-#ifdef HAVE_PUTENV
-static void intrin_putenv (void) /*{{{*/
-{
-   char *s;
-
-   /* Some putenv implementations required malloced strings. */
-   if (SLpop_string(&s)) return;
-
-   if (putenv (s))
-     {
-	SLang_Error = SL_INTRINSIC_ERROR;
-	SLfree (s);
-     }
-
-   /* Note that s is NOT freed */
-}
-
-/*}}}*/
-
-#endif
-
-static void lang_print_stack (void) /*{{{*/
-{
-   char buf[32];
-   unsigned int n;
-
-   n = (unsigned int) (_SLStack_Pointer - _SLRun_Stack);
-   while (n)
-     {
-	n--;
-	sprintf (buf, "(%u)", n);
-	_SLdump_objects (buf, _SLRun_Stack + n, 1, 1);
-     }
-}
-
-/*}}}*/
-
-static void byte_compile_file (char *f, int *m)
-{
-   SLang_byte_compile_file (f, *m);
-}
-
-static void intrin_type_info1 (void)
-{
-   SLang_Object_Type obj;
-   unsigned int type;
-
-   if (-1 == SLang_pop (&obj))
-     return;
-
-   type = obj.data_type;
-   if (type == SLANG_ARRAY_TYPE)
-     type = obj.v.array_val->data_type;
-
-   SLang_free_object (&obj);
-
-   _SLang_push_datatype (type);
-}
-
-static void intrin_type_info (void)
-{
-   SLang_Object_Type obj;
-
-   if (-1 == SLang_pop (&obj))
-     return;
-
-   _SLang_push_datatype (obj.data_type);
-   SLang_free_object (&obj);
-}
-
-void _SLstring_intrinsic (void) /*{{{*/
-{
-   SLang_Object_Type x;
-   char *s;
-
-   if (SLang_pop (&x)) return;
-   if (NULL != (s = _SLstringize_object (&x)))
-     _SLang_push_slstring (s);
-
-   SLang_free_object (&x);
-}
-
-/*}}}*/
-
-static void intrin_typecast (void)
-{
-   unsigned char to_type;
-   if (0 == _SLang_pop_datatype (&to_type))
-     (void) SLclass_typecast (to_type, 0, 1);
-}
-
-#if SLANG_HAS_FLOAT
-static void intrin_double (void)
-{
-   (void) SLclass_typecast (SLANG_DOUBLE_TYPE, 0, 1);
-}
-
-#endif
-
-static void intrin_int (void) /*{{{*/
-{
-   (void) SLclass_typecast (SLANG_INT_TYPE, 0, 1);
-}
-
-/*}}}*/
-
-static char *
-intrin_function_name (void)
-{
-   if (NULL == _SLang_Current_Function_Name)
-     return "";
-   return _SLang_Current_Function_Name;
-}
-
-static void intrin_message (char *s)
-{
-   SLang_vmessage ("%s", s);
-}
-
-static void intrin_error (char *s)
-{
-   SLang_verror (SL_USER_ERROR, "%s", s);
-}
-
-static void intrin_pop_n (int *n)
-{
-   SLdo_pop_n ((unsigned int) *n);
-}
-
-static void intrin_reverse_stack (int *n)
-{
-   SLreverse_stack (*n);
-}
-
-static void intrin_roll_stack (int *n)
-{
-   SLroll_stack (*n);
-}
-
-static void usage (void)
-{
-   char *msg;
-
-   _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1);   /* do not include format */
-
-   if (-1 == SLang_pop_slstring (&msg))
-     return;
-
-   SLang_verror (SL_USAGE_ERROR, "Usage: %s", msg);
-   SLang_free_slstring (msg);
-}
-
-/* Convert string to integer */
-static int intrin_integer (char *s)
-{
-   int i;
-
-   i = SLatoi ((unsigned char *) s);
-
-   if (SLang_Error)
-     SLang_verror (SL_TYPE_MISMATCH, "Unable to convert string to integer");
-   return i;
-}
-/*}}}*/
-
-static void guess_type (char *s)
-{
-   _SLang_push_datatype (SLang_guess_type(s));
-}
-
-static int load_file (char *s)
-{
-   if (-1 == SLang_load_file (s))
-     return 0;
-   return 1;
-}
-
-static void get_doc_string (char *file, char *topic)
-{
-   FILE *fp;
-   char line[1024];
-   unsigned int topic_len, str_len;
-   char *str;
-   char ch;
-
-   if (NULL == (fp = fopen (file, "r")))
-     {
-	SLang_push_null ();
-	return;
-     }
-
-   topic_len = strlen (topic);
-   ch = *topic;
-
-   while (1)
-     {
-	if (NULL == fgets (line, sizeof(line), fp))
-	  {
-	     fclose (fp);
-	     (void) SLang_push_null ();
-	     return;
-	  }
-
-	if ((ch == *line)
-	    && (0 == strncmp (line, topic, topic_len))
-	    && ((line[topic_len] == '\n') || (line [topic_len] == 0)
-		|| (line[topic_len] == ' ') || (line[topic_len] == '\t')))
-	  break;
-     }
-
-   if (NULL == (str = SLmake_string (line)))
-     {
-	fclose (fp);
-	(void) SLang_push_null ();
-	return;
-     }
-   str_len = strlen (str);
-
-   while (NULL != fgets (line, sizeof (line), fp))
-     {
-	unsigned int len;
-	char *new_str;
-
-	ch = *line;
-	if (ch == '#') continue;
-	if (ch == '-') break;
-
-	len = strlen (line);
-	if (NULL == (new_str = SLrealloc (str, str_len + len + 1)))
-	  {
-	     SLfree (str);
-	     str = NULL;
-	     break;
-	  }
-	str = new_str;
-	strcpy (str + str_len, line);
-	str_len += len;
-     }
-
-   fclose (fp);
-
-   (void) SLang_push_malloced_string (str);
-}
-
-static int push_string_array_elements (SLang_Array_Type *at)
-{
-   char **strs;
-   unsigned int num;
-   unsigned int i;
-
-   if (at == NULL)
-     return -1;
-   
-   strs = (char **)at->data;
-   num = at->num_elements;
-   for (i = 0; i < num; i++)
-     {
-	if (-1 == SLang_push_string (strs[i]))
-	  {
-	     SLdo_pop_n (i);
-	     return -1;
-	  }
-     }
-   SLang_push_integer ((int) num);
-   return 0;
-}
-
-	
-static void intrin_apropos (void)
-{
-   int num_args;
-   char *pat;
-   char *namespace_name;
-   unsigned int flags;
-   SLang_Array_Type *at;
-
-   num_args = SLang_Num_Function_Args;
-
-   if (-1 == SLang_pop_uinteger (&flags))
-     return;
-   if (-1 == SLang_pop_slstring (&pat))
-     return;
-   
-   namespace_name = NULL;
-   at = NULL;
-   if (num_args == 3)
-     {
-	if (-1 == SLang_pop_slstring (&namespace_name))
-	  goto free_and_return;
-     }
-
-   at = _SLang_apropos (namespace_name, pat, flags);
-   if (num_args == 3)
-     {
-	(void) SLang_push_array (at, 0);
-	goto free_and_return;
-     }
-
-   /* Maintain compatibility with old version of the function.  That version
-    * did not take three arguments and returned everything to the stack.
-    * Yuk.
-    */
-   (void) push_string_array_elements (at);
-
-   free_and_return:
-   /* NULLs ok */
-   SLang_free_slstring (namespace_name);
-   SLang_free_slstring (pat);
-   SLang_free_array (at);
-}
-
-static int intrin_get_defines (void)
-{
-   int n = 0;
-   char **s = _SLdefines;
-
-   while (*s != NULL)
-     {
-	if (-1 == SLang_push_string (*s))
-	  {
-	     SLdo_pop_n ((unsigned int) n);
-	     return -1;
-	  }
-	s++;
-	n++;
-     }
-   return n;
-}
-
-static void intrin_get_reference (char *name)
-{
-   _SLang_push_ref (1, (VOID_STAR) _SLlocate_name (name));
-}
-
-#ifdef HAVE_SYS_UTSNAME_H
-# include <sys/utsname.h>
-#endif
-
-static void uname_cmd (void)
-{
-#ifdef HAVE_UNAME
-   struct utsname u;
-   char *field_names [6];
-   unsigned char field_types[6];
-   VOID_STAR field_values [6];
-   char *ptrs[6];
-   int i;
-
-   if (-1 == uname (&u))
-     (void) SLang_push_null ();
-
-   field_names[0] = "sysname"; ptrs[0] = u.sysname;
-   field_names[1] = "nodename"; ptrs[1] = u.nodename;
-   field_names[2] = "release"; ptrs[2] = u.release;
-   field_names[3] = "version"; ptrs[3] = u.version;
-   field_names[4] = "machine"; ptrs[4] = u.machine;
-
-   for (i = 0; i < 5; i++)
-     {
-	field_types[i] = SLANG_STRING_TYPE;
-	field_values[i] = (VOID_STAR) &ptrs[i];
-     }
-
-   if (0 == SLstruct_create_struct (5, field_names, field_types, field_values))
-     return;
-#endif
-
-   SLang_push_null ();
-}
-
-static void uninitialize_ref_intrin (SLang_Ref_Type *ref)
-{
-   (void) _SLang_uninitialize_ref (ref);
-}
-
-static SLang_Intrin_Fun_Type SLang_Basic_Table [] = /*{{{*/
-{
-   MAKE_INTRINSIC_1("__is_initialized", _SLang_is_ref_initialized, SLANG_INT_TYPE, SLANG_REF_TYPE),
-   MAKE_INTRINSIC_S("__get_reference", intrin_get_reference, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_1("__uninitialize", uninitialize_ref_intrin, SLANG_VOID_TYPE, SLANG_REF_TYPE),
-   MAKE_INTRINSIC_SS("get_doc_string_from_file",  get_doc_string, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SS("autoload",  SLang_autoload, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("is_defined",  SLang_is_defined, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("string",  _SLstring_intrinsic, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("uname", uname_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("getenv",  intrin_getenv_cmd, SLANG_VOID_TYPE),
-#ifdef HAVE_PUTENV
-   MAKE_INTRINSIC_0("putenv",  intrin_putenv, SLANG_VOID_TYPE),
-#endif
-   MAKE_INTRINSIC_S("evalfile",  load_file, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("char",  char_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("eval",  SLang_load_string, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("dup",  do_dup, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("integer",  intrin_integer, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("system",  SLsystem, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("_apropos",  intrin_apropos, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("_trace_function",  _SLang_trace_fun, SLANG_VOID_TYPE),
-#if SLANG_HAS_FLOAT
-   MAKE_INTRINSIC_S("atof", _SLang_atof, SLANG_DOUBLE_TYPE),
-   MAKE_INTRINSIC_0("double", intrin_double, SLANG_VOID_TYPE),
-#endif
-   MAKE_INTRINSIC_0("int",  intrin_int, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("typecast", intrin_typecast, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_stkdepth", _SLstack_depth, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("_stk_reverse", intrin_reverse_stack, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("typeof", intrin_type_info, VOID_TYPE),
-   MAKE_INTRINSIC_0("_typeof", intrin_type_info1, VOID_TYPE),
-   MAKE_INTRINSIC_I("_pop_n", intrin_pop_n, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_print_stack", lang_print_stack, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_I("_stk_roll", intrin_roll_stack, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SI("byte_compile_file", byte_compile_file, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_clear_error", _SLang_clear_error, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_function_name", intrin_function_name, SLANG_STRING_TYPE),
-#if SLANG_HAS_FLOAT
-   MAKE_INTRINSIC_S("set_float_format", _SLset_double_format, SLANG_VOID_TYPE),
-#endif
-   MAKE_INTRINSIC_S("_slang_guess_type", guess_type, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("error", intrin_error, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("message", intrin_message, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("__get_defined_symbols", intrin_get_defines, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("__pop_args", _SLstruct_pop_args, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_1("__push_args", _SLstruct_push_args, SLANG_VOID_TYPE, SLANG_ARRAY_TYPE),
-   MAKE_INTRINSIC_0("usage", usage, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("implements", _SLang_implements_intrinsic, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("use_namespace", _SLang_use_namespace_intrinsic, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("current_namespace", _SLang_cur_namespace_intrinsic, SLANG_STRING_TYPE),
-   MAKE_INTRINSIC_0("length", length_cmd, SLANG_INT_TYPE),
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-/*}}}*/
-
-#ifdef SLANG_DOC_DIR
-char *SLang_Doc_Dir = SLANG_DOC_DIR;
-#else
-char *SLang_Doc_Dir = "";
-#endif
-
-static SLang_Intrin_Var_Type Intrin_Vars[] =
-{
-   MAKE_VARIABLE("_debug_info", &_SLang_Compile_Line_Num_Info, SLANG_INT_TYPE, 0),
-   MAKE_VARIABLE("_auto_declare", &_SLang_Auto_Declare_Globals, SLANG_INT_TYPE, 0),
-   MAKE_VARIABLE("_traceback", &SLang_Traceback, SLANG_INT_TYPE, 0),
-   MAKE_VARIABLE("_slangtrace", &_SLang_Trace, SLANG_INT_TYPE, 0),
-   MAKE_VARIABLE("_slang_version", &SLang_Version, SLANG_INT_TYPE, 1),
-   MAKE_VARIABLE("_slang_version_string", &SLang_Version_String, SLANG_STRING_TYPE, 1),
-   MAKE_VARIABLE("_NARGS", &SLang_Num_Function_Args, SLANG_INT_TYPE, 1),
-   MAKE_VARIABLE("_slang_doc_dir", &SLang_Doc_Dir, SLANG_STRING_TYPE, 1),
-   MAKE_VARIABLE("NULL", NULL, SLANG_NULL_TYPE, 1),
-   SLANG_END_INTRIN_VAR_TABLE
-};
-
-int SLang_init_slang (void) /*{{{*/
-{
-   char name[3];
-   unsigned int i;
-   char **s;
-   static char *sys_defines [] =
-     {
-#if defined(__os2__)
-	"OS2",
-#endif
-#if defined(__MSDOS__)
-	"MSDOS",
-#endif
-#if defined(__WIN16__)
-	"WIN16",
-#endif
-#if defined (__WIN32__)
-	"WIN32",
-#endif
-#if defined(__NT__)
-	"NT",
-#endif
-#if defined (VMS)
-	"VMS",
-#endif
-#ifdef REAL_UNIX_SYSTEM
-	"UNIX",
-#endif
-#if SLANG_HAS_FLOAT
-	"SLANG_DOUBLE_TYPE",
-#endif
-	NULL
-     };
-
-   if (-1 == _SLregister_types ()) return -1;
-
-   if ((-1 == SLadd_intrin_fun_table(SLang_Basic_Table, NULL))
-       || (-1 == SLadd_intrin_var_table (Intrin_Vars, NULL))
-       || (-1 == _SLang_init_slstrops ())
-       || (-1 == _SLang_init_sltime ())
-       || (-1 == _SLstruct_init ())
-#if SLANG_HAS_COMPLEX
-       || (-1 == _SLinit_slcomplex ())
-#endif
-#if SLANG_HAS_ASSOC_ARRAYS
-       || (-1 == SLang_init_slassoc ())
-#endif
-       )
-     return -1;
-
-   SLadd_global_variable (SLANG_SYSTEM_NAME);
-
-   s = sys_defines;
-   while (*s != NULL)
-     {
-	if (-1 == SLdefine_for_ifdef (*s)) return -1;
-	s++;
-     }
-
-   /* give temp global variables $0 --> $9 */
-   name[2] = 0; name[0] = '$';
-   for (i = 0; i < 10; i++)
-     {
-	name[1] = (char) (i + '0');
-	SLadd_global_variable (name);
-     }
-
-   SLang_init_case_tables ();
-
-   /* Now add a couple of macros */
-   SLang_load_string (".(_NARGS 1 - Sprintf error)verror");
-   SLang_load_string (".(_NARGS 1 - Sprintf message)vmessage");
-
-   if (SLang_Error)
-     return -1;
-
-   return 0;
-}
-
-/*}}}*/
-
-int SLang_set_argc_argv (int argc, char **argv)
-{
-   static int this_argc;
-   static char **this_argv;
-   int i;
-
-   if (argc < 0) argc = 0;
-   this_argc = argc;
-
-   if (NULL == (this_argv = (char **) SLmalloc ((argc + 1) * sizeof (char *))))
-     return -1;
-   memset ((char *) this_argv, 0, sizeof (char *) * (argc + 1));
-
-   for (i = 0; i < argc; i++)
-     {
-	if (NULL == (this_argv[i] = SLang_create_slstring (argv[i])))
-	  goto return_error;
-     }
-
-   if (-1 == SLadd_intrinsic_variable ("__argc", (VOID_STAR)&this_argc,
-				       SLANG_INT_TYPE, 1))
-     goto return_error;
-
-   if (-1 == SLang_add_intrinsic_array ("__argv", SLANG_STRING_TYPE, 1,
-					(VOID_STAR) this_argv, 1, argc))
-     goto return_error;
-
-   return 0;
-
-   return_error:
-   for (i = 0; i < argc; i++)
-     SLang_free_slstring (this_argv[i]);   /* NULL ok */
-   SLfree ((char *) this_argv);
-
-   return -1;
-}
diff --git a/mdk-stage1/slang/slstdio.c b/mdk-stage1/slang/slstdio.c
deleted file mode 100644
index 05db1af77..000000000
--- a/mdk-stage1/slang/slstdio.c
+++ /dev/null
@@ -1,1050 +0,0 @@
-/* file stdio intrinsics for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if defined(__unix__) || (defined (__os2__) && defined (__EMX__))
-# include <sys/types.h>
-#endif
-
-#ifdef HAVE_FCNTL_H
-# include <fcntl.h>
-#endif
-#ifdef HAVE_SYS_FCNTL_H
-# include <sys/fcntl.h>
-#endif
-
-#ifdef __unix__
-# include <sys/file.h>
-#endif
-
-#if defined(__BORLANDC__)
-# include <io.h>
-# include <dir.h>
-#endif
-
-#if defined(__DECC) && defined(VMS)
-# include <unixio.h>
-# include <unixlib.h>
-#endif
-
-#ifdef VMS
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#include <errno.h>
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct
-{
-   FILE *fp;			       /* kind of obvious */
-   char *file;			       /* file name associated with pointer */
-
-   unsigned int flags;		       /* modes, etc... */
-#define SL_READ		0x0001
-#define SL_WRITE	0x0002
-#define SL_BINARY	0x0004
-#define SL_FDOPEN	0x2000
-#define SL_PIPE		0x4000
-#define SL_INUSE	0x8000
-}
-SL_File_Table_Type;
-
-static SL_File_Table_Type *SL_File_Table;
-
-static SL_File_Table_Type *get_free_file_table_entry (void)
-{
-   SL_File_Table_Type *t = SL_File_Table, *tmax;
-
-   tmax = t + SL_MAX_FILES;
-   while (t < tmax)
-     {
-	if (t->flags == 0)
-	  {
-	     memset ((char *) t, 0, sizeof (SL_File_Table_Type));
-	     return t;
-	  }
-	t++;
-     }
-
-   return NULL;
-}
-
-static unsigned int file_process_flags (char *mode)
-{
-   char ch;
-   unsigned int flags = 0;
-
-   while (1)
-     {
-	ch = *mode++;
-	switch (ch)
-	  {
-	   case 'r': flags |= SL_READ;
-	     break;
-	   case 'w':
-	   case 'a':
-	   case 'A':
-	     flags |= SL_WRITE;
-	     break;
-	   case '+': flags |= SL_WRITE | SL_READ;
-	     break;
-	   case 'b': flags |= SL_BINARY;
-	     break;
-	   case 0:
-	     return flags;
-
-	   default:
-	     SLang_verror (SL_INVALID_PARM, "File flag %c is not supported", ch);
-	     return 0;
-	  }
-     }
-}
-
-static int open_file_type (char *file, int fd, char *mode,
-			   FILE *(*open_fun)(char *, char *),
-			   int (*close_fun)(FILE *),
-			   unsigned int xflags)
-{
-   FILE *fp;
-   SL_File_Table_Type *t;
-   unsigned int flags;
-   SLang_MMT_Type *mmt;
-
-   fp = NULL;
-   t = NULL;
-   mmt = NULL;
-
-   if ((NULL == (t = get_free_file_table_entry ()))
-       || (0 == (flags = file_process_flags(mode))))
-     goto return_error;
-   
-   if (fd != -1)
-     fp = fdopen (fd, mode);
-   else
-     fp = open_fun (file, mode);
-
-   if (fp == NULL)
-     {
-	_SLerrno_errno = errno;
-	goto return_error;
-     }
-
-   if (NULL == (mmt = SLang_create_mmt (SLANG_FILE_PTR_TYPE, (VOID_STAR) t)))
-     goto return_error;
-
-   t->fp = fp;
-   t->flags = flags | xflags;
-   fp = NULL;			       /* allow free_mmt to close fp */
-
-   if ((NULL != (t->file = SLang_create_slstring (file)))
-       && (0 == SLang_push_mmt (mmt)))
-     return 0;
-
-   /* drop */
-
-   return_error:
-   if (fp != NULL) (*close_fun) (fp);
-   if (mmt != NULL) SLang_free_mmt (mmt);
-   (void) SLang_push_null ();
-   return -1;
-}
-
-/* Since some compilers do not have popen/pclose prototyped and in scope,
- * and pc compilers sometimes have silly prototypes involving PASCAL, etc.
- * use wrappers around the function to avoid compilation errors.
- */
-
-static FILE *fopen_fun (char *f, char *m)
-{
-   return fopen (f, m);
-}
-static int fclose_fun (FILE *fp)
-{
-   return fclose (fp);
-}
-
-static void stdio_fopen (char *file, char *mode)
-{
-   (void) open_file_type (file, -1, mode, fopen_fun, fclose_fun, 0);
-}
-
-int _SLstdio_fdopen (char *file, int fd, char *mode)
-{
-   if (fd == -1)
-     {
-	_SLerrno_errno = EBADF;
-	(void) SLang_push_null ();
-	return -1;
-     }
-
-   return open_file_type (file, fd, mode, NULL, fclose_fun, SL_FDOPEN);
-}
-
-#ifdef HAVE_POPEN
-static int pclose_fun (FILE *fp)
-{
-   return pclose (fp);
-}
-
-static FILE *popen_fun (char *file, char *mode)
-{
-   return popen (file, mode);
-}
-
-static void stdio_popen (char *file, char *mode)
-{
-   (void) open_file_type (file, -1, mode, popen_fun, pclose_fun, SL_PIPE);
-}
-#endif
-
-/* returns pointer to file entry if it is open and consistent with
-   flags.  Returns NULL otherwise */
-static SLang_MMT_Type *pop_fp (unsigned int flags, FILE **fp_ptr)
-{
-   SL_File_Table_Type *t;
-   SLang_MMT_Type *mmt;
-
-   *fp_ptr = NULL;
-
-   if (NULL == (mmt = SLang_pop_mmt (SLANG_FILE_PTR_TYPE)))
-     return NULL;
-
-   t = (SL_File_Table_Type *) SLang_object_from_mmt (mmt);
-   if ((t->flags & flags)
-       && (NULL != (*fp_ptr = t->fp)))
-     return mmt;
-
-   SLang_free_mmt (mmt);
-   return NULL;
-}
-
-static FILE *check_fp (SL_File_Table_Type *t, unsigned flags)
-{
-   if ((t != NULL) && (t->flags & flags))
-     return t->fp;
-
-   return NULL;
-}
-
-char *SLang_get_name_from_fileptr (SLang_MMT_Type *mmt)
-{
-   SL_File_Table_Type *ft;
-
-   ft = (SL_File_Table_Type *) SLang_object_from_mmt (mmt);
-   if (ft == NULL)
-     return NULL;
-   return ft->file;
-}
-
-int SLang_pop_fileptr (SLang_MMT_Type **mmt, FILE **fp)
-{
-   if (NULL == (*mmt = pop_fp (0xFFFF, fp)))
-     {
-#ifdef EBADF
-	_SLerrno_errno = EBADF;
-#endif
-	return -1;
-     }
-
-   return 0;
-}
-
-static int close_file_type (SL_File_Table_Type *t)
-{
-   int ret = 0;
-   FILE *fp;
-
-   if (t == NULL)
-     return -1;
-
-   fp = t->fp;
-
-   if (NULL == fp) ret = -1;
-   else
-     {
-	if (0 == (t->flags & SL_PIPE))
-	  {
-	     if (EOF == (ret = fclose (fp)))
-	       _SLerrno_errno = errno;
-	  }
-#ifdef HAVE_POPEN
-	else
-	  {
-	     if (-1 == (ret = pclose (fp)))
-	       _SLerrno_errno = errno;
-	  }
-#endif
-     }
-
-   if (t->file != NULL) SLang_free_slstring (t->file);
-   memset ((char *) t, 0, sizeof (SL_File_Table_Type));
-   return ret;
-}
-
-static int stdio_fclose (SL_File_Table_Type *t)
-{
-   int ret;
-
-   if (NULL == check_fp (t, 0xFFFF))
-     return -1;
-
-   ret = close_file_type (t);
-
-   t->flags = SL_INUSE;
-   return ret;
-}
-
-static int read_one_line (FILE *fp, char **strp, unsigned int *lenp)
-{
-   char buf[512];
-   char *str;
-   unsigned int len;
-
-   *strp = NULL;
-   len = 0;
-   str = NULL;
-
-   while (NULL != fgets (buf, sizeof (buf), fp))
-     {
-	unsigned int dlen;
-	char *new_str;
-	int done_flag;
-
-	dlen = strlen (buf);
-	/* Note: If the file contains embedded \0 characters, then this
-	 * fails to work properly since dlen will not be correct.
-	 */
-	done_flag = ((dlen + 1 < sizeof (buf))
-		     || (buf[dlen - 1] == '\n'));
-
-	if (done_flag && (str == NULL))
-	  {
-	     /* Avoid the malloc */
-	     str = buf;
-	     len = dlen;
-	     break;
-	  }
-
-	if (NULL == (new_str = SLrealloc (str, len + dlen + 1)))
-	  {
-	     SLfree (str);
-	     return -1;
-	  }
-
-	str = new_str;
-	strcpy (str + len, buf);
-	len += dlen;
-
-	if (done_flag) break;
-     }
-
-   if (str == NULL)
-     return 0;
-
-   *strp = SLang_create_nslstring (str, len);
-   if (str != buf) SLfree (str);
-
-   if (*strp == NULL) return -1;
-
-   *lenp = len;
-   return 1;
-}
-
-/* returns number of characters read and pushes the string to the stack.
-   If it fails, it returns -1 */
-static int stdio_fgets (SLang_Ref_Type *ref, SL_File_Table_Type *t)
-{
-   char *s;
-   unsigned int len;
-   FILE *fp;
-   int status;
-
-   if (NULL == (fp = check_fp (t, SL_READ)))
-     return -1;
-
-   status = read_one_line (fp, &s, &len);
-   if (status <= 0)
-     return -1;
-
-   status = SLang_assign_to_ref (ref, SLANG_STRING_TYPE, (VOID_STAR)&s);
-   SLang_free_slstring (s);
-
-   if (status == -1)
-     return -1;
-
-   return (int) len;
-}
-
-static void stdio_fgetslines_internal (FILE *fp, unsigned int n)
-{
-   unsigned int num_lines, max_num_lines;
-   char **list;
-   SLang_Array_Type *at;
-   int inum_lines;
-
-   if (n > 1024)
-     max_num_lines = 1024;
-   else 
-     {
-	max_num_lines = n;
-	if (max_num_lines == 0)
-	  max_num_lines++;
-     }
-
-   list = (char **) SLmalloc (sizeof (char *) * max_num_lines);
-   if (list == NULL)
-     return;
-
-   num_lines = 0;
-   while (num_lines < n)
-     {
-	int status;
-	char *line;
-	unsigned int len;
-
-	status = read_one_line (fp, &line, &len);
-	if (status == -1)
-	  goto return_error;
-
-	if (status == 0)
-	  break;
-
-	if (max_num_lines == num_lines)
-	  {
-	     char **new_list;
-
-	     if (max_num_lines + 4096 > n)
-	       max_num_lines = n;
-	     else
-	       max_num_lines += 4096;
-
-	     new_list = (char **) SLrealloc ((char *)list, sizeof (char *) * max_num_lines);
-	     if (new_list == NULL)
-	       {
-		  SLang_free_slstring (line);
-		  goto return_error;
-	       }
-	     list = new_list;
-	  }
-
-	list[num_lines] = line;
-	num_lines++;
-     }
-
-   if (num_lines != max_num_lines)
-     {
-	char **new_list;
-
-	new_list = (char **)SLrealloc ((char *)list, sizeof (char *) * (num_lines + 1));
-	if (new_list == NULL)
-	  goto return_error;
-
-	list = new_list;
-     }
-
-   inum_lines = (int) num_lines;
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) list, &inum_lines, 1)))
-     goto return_error;
-
-   if (-1 == SLang_push_array (at, 1))
-     SLang_push_null ();
-   return;
-
-   return_error:
-   while (num_lines > 0)
-     {
-	num_lines--;
-	SLfree (list[num_lines]);
-     }
-   SLfree ((char *)list);
-   SLang_push_null ();
-}
-
-static void stdio_fgetslines (void)
-{
-   unsigned int n;
-   FILE *fp;
-   SLang_MMT_Type *mmt;
-
-   n = (unsigned int)-1;
-
-   if (SLang_Num_Function_Args == 2)
-     {
-	if (-1 == SLang_pop_uinteger (&n))
-	  return;
-     }
-   
-   if (NULL == (mmt = pop_fp (SL_READ, &fp)))
-     {
-	SLang_push_null ();
-	return;
-     }
-
-   stdio_fgetslines_internal (fp, n);
-   SLang_free_mmt (mmt);
-}
-
-
-static int stdio_fputs (char *s, SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, SL_WRITE)))
-     return -1;
-
-   if (EOF == fputs(s, fp)) return -1;
-   return (int) strlen (s);
-}
-
-static int stdio_fflush (SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, SL_WRITE)))
-     return -1;
-
-   if (EOF == fflush (fp))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   return 0;
-}
-
-/* Usage: n = fread (&str, data-type, nelems, fp); */
-static void stdio_fread (SLang_Ref_Type *ref, int *data_typep, unsigned int *num_elemns, SL_File_Table_Type *t)
-{
-   char *s;
-   FILE *fp;
-   int ret;
-   unsigned int num_read, num_to_read;
-   unsigned int nbytes;
-   SLang_Class_Type *cl;
-   unsigned int sizeof_type;
-   int data_type;
-
-   ret = -1;
-   s = NULL;
-   cl = NULL;
-
-   if (NULL == (fp = check_fp (t, SL_READ)))
-     goto the_return;
-
-   /* FIXME: priority = low : I should add some mechanism to support
-    * other types.
-    */
-   data_type = *data_typep;
-
-   cl = _SLclass_get_class ((unsigned char) data_type);
-
-   if (cl->cl_fread == NULL)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "fread does not support %s objects",
-		      cl->cl_name);
-	goto the_return;
-     }
-
-   sizeof_type = cl->cl_sizeof_type;
-
-   num_to_read = *num_elemns;
-   nbytes = (unsigned int) num_to_read * sizeof_type;
-
-   s = SLmalloc (nbytes + 1);
-   if (s == NULL)
-     goto the_return;
-
-   ret = cl->cl_fread (data_type, fp, (VOID_STAR)s, num_to_read, &num_read);
-
-   if ((num_read == 0)
-       && (num_read != num_to_read))
-     ret = -1;
-
-   if ((ret == -1) && ferror (fp))
-     _SLerrno_errno = errno;
-
-   if ((ret == 0)
-       && (num_read != num_to_read))
-     {
-	char *new_s;
-
-	nbytes = num_read * sizeof_type;
-	new_s = SLrealloc (s, nbytes + 1);
-	if (new_s == NULL)
-	  ret = -1;
-	else
-	  s = new_s;
-     }
-
-   if (ret == 0)
-     {
-	if (num_read == 1)
-	  {
-	     ret = SLang_assign_to_ref (ref, data_type, (VOID_STAR)s);
-	     SLfree (s);
-	  }
-	else if ((data_type == SLANG_CHAR_TYPE)
-		 || (data_type == SLANG_UCHAR_TYPE))
-	  {
-	     SLang_BString_Type *bs;
-
-	     bs = SLbstring_create_malloced ((unsigned char *)s, num_read, 1);
-	     ret = SLang_assign_to_ref (ref, SLANG_BSTRING_TYPE, (VOID_STAR)&bs);
-	     SLbstring_free (bs);
-	  }
-	else
-	  {
-	     SLang_Array_Type *at;
-	     int inum_read = (int) num_read;
-	     at = SLang_create_array (data_type, 0, (VOID_STAR)s, &inum_read, 1);
-	     ret = SLang_assign_to_ref (ref, SLANG_ARRAY_TYPE, (VOID_STAR)&at);
-	     SLang_free_array (at);
-	  }
-	s = NULL;
-     }
-
-   the_return:
-
-   if (s != NULL)
-     SLfree (s);
-   
-   if (ret == -1)
-     SLang_push_integer (ret);
-   else
-     SLang_push_uinteger (num_read);
-}
-
-/* Usage: n = fwrite (str, fp); */
-static void stdio_fwrite (SL_File_Table_Type *t)
-{
-   FILE *fp;
-   unsigned char *s;
-   unsigned int num_to_write, num_write;
-   int ret;
-   SLang_BString_Type *b;
-   SLang_Array_Type *at;
-   SLang_Class_Type *cl;
-
-   ret = -1;
-   b = NULL;
-   at = NULL;
-
-   switch (SLang_peek_at_stack ())
-     {
-      case SLANG_BSTRING_TYPE:
-      case SLANG_STRING_TYPE:
-	if (-1 == SLang_pop_bstring (&b))
-	  goto the_return;
-
-	if (NULL == (s = SLbstring_get_pointer (b, &num_to_write)))
-	  goto the_return;
-
-	cl = _SLclass_get_class (SLANG_UCHAR_TYPE);
-	break;
-
-      default:
-	if (-1 == SLang_pop_array (&at, 1))
-	  goto the_return;
-
-	cl = at->cl;
-	num_to_write = at->num_elements;
-	s = (unsigned char *) at->data;
-     }
-
-   if (NULL == (fp = check_fp (t, SL_WRITE)))
-     goto the_return;
-
-   if (cl->cl_fwrite == NULL)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "fwrite does not support %s objects", cl->cl_name);
-	goto the_return;
-     }
-
-   ret = cl->cl_fwrite (cl->cl_data_type, fp, s, num_to_write, &num_write);
-
-   if ((ret == -1) && ferror (fp))
-     _SLerrno_errno = errno;
-
-   /* drop */
-   the_return:
-   if (b != NULL)
-     SLbstring_free (b);
-   if (at != NULL)
-     SLang_free_array (at);
-
-   if (ret == -1)
-     SLang_push_integer (ret);
-   else
-     SLang_push_uinteger (num_write);
-}
-
-static int stdio_fseek (SL_File_Table_Type *t, int *ofs, int *whence)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, 0xFFFF)))
-     return -1;
-
-   if (-1  == fseek (fp, (long) *ofs, *whence))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   return 0;
-}
-
-static int stdio_ftell (SL_File_Table_Type *t)
-{
-   FILE *fp;
-   long ofs;
-
-   if (NULL == (fp = check_fp (t, 0xFFFF)))
-     return -1;
-
-   if (-1L == (ofs = ftell (fp)))
-     {
-	_SLerrno_errno = errno;
-	return -1;
-     }
-
-   return (int) ofs;
-}
-
-static int stdio_feof (SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, 0xFFFF)))
-     return -1;
-
-   return feof (fp);
-}
-
-static int stdio_ferror (SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL == (fp = check_fp (t, 0xFFFF)))
-     return -1;
-
-   return ferror (fp);
-}
-
-static void stdio_clearerr (SL_File_Table_Type *t)
-{
-   FILE *fp;
-
-   if (NULL != (fp = check_fp (t, 0xFFFF)))
-     clearerr (fp);
-}
-
-/* () = fprintf (fp, "FORMAT", arg...); */
-static int stdio_fprintf (void)
-{
-   char *s;
-   FILE *fp;
-   SLang_MMT_Type *mmt;
-   int status;
-
-   if (-1 == _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 2))
-     return -1;
-   
-   if (-1 == SLang_pop_slstring (&s))
-     return -1;
-   
-   if (NULL == (mmt = pop_fp (SL_WRITE, &fp)))
-     {
-	SLang_free_slstring (s);
-	return -1;
-     }
-   
-   if (EOF == fputs(s, fp))
-     status = -1;
-   else
-     status = (int) strlen (s);
-
-   SLang_free_mmt (mmt);
-   SLang_free_slstring (s);
-   return status;
-}
-
-static int stdio_printf (void)
-{
-   char *s;
-   int status;
-
-   if (-1 == _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1))
-     return -1;
-
-   if (-1 == SLang_pop_slstring (&s))
-     return -1;
-   
-   if (EOF == fputs(s, stdout))
-     status = -1;
-   else
-     status = (int) strlen (s);
-
-   SLang_free_slstring (s);
-   return status;
-}
-
-   
-#define F SLANG_FILE_PTR_TYPE
-#define R SLANG_REF_TYPE
-#define I SLANG_INT_TYPE
-#define V SLANG_VOID_TYPE
-#define S SLANG_STRING_TYPE
-#define B SLANG_BSTRING_TYPE
-#define U SLANG_UINT_TYPE
-#define D SLANG_DATATYPE_TYPE
-static SLang_Intrin_Fun_Type Stdio_Name_Table[] =
-{
-   MAKE_INTRINSIC_0("fgetslines", stdio_fgetslines, V),
-   MAKE_INTRINSIC_SS("fopen", stdio_fopen, V),
-   MAKE_INTRINSIC_1("feof", stdio_feof, I, F),
-   MAKE_INTRINSIC_1("ferror", stdio_ferror, I, F),
-   MAKE_INTRINSIC_1("fclose", stdio_fclose, I, F),
-   MAKE_INTRINSIC_2("fgets", stdio_fgets, I, R, F),
-   MAKE_INTRINSIC_1("fflush", stdio_fflush, I, F),
-   MAKE_INTRINSIC_2("fputs", stdio_fputs, I, S, F),
-   MAKE_INTRINSIC_0("fprintf", stdio_fprintf, I),
-   MAKE_INTRINSIC_0("printf", stdio_printf, I),
-   MAKE_INTRINSIC_3("fseek", stdio_fseek, I, F, I, I),
-   MAKE_INTRINSIC_1("ftell", stdio_ftell, I, F),
-   MAKE_INTRINSIC_1("clearerr", stdio_clearerr, V, F),
-   MAKE_INTRINSIC_4("fread", stdio_fread, V, R, D, U, F),
-   MAKE_INTRINSIC_1("fwrite", stdio_fwrite, V, F),
-#ifdef HAVE_POPEN
-   MAKE_INTRINSIC_SS("popen", stdio_popen, V),
-   MAKE_INTRINSIC_1("pclose", stdio_fclose, I, F),
-#endif
-   SLANG_END_INTRIN_FUN_TABLE
-};
-#undef F
-#undef I
-#undef R
-#undef V
-#undef S
-#undef B
-#undef U
-#undef D
-
-#ifndef SEEK_SET
-# define SEEK_SET 0
-#endif
-#ifndef SEEK_CUR
-# define SEEK_CUR 1
-#endif
-#ifndef SEEK_END
-# define SEEK_END 2
-#endif
-
-static SLang_IConstant_Type Stdio_Consts [] =
-{
-   MAKE_ICONSTANT("SEEK_SET", SEEK_SET),
-   MAKE_ICONSTANT("SEEK_END", SEEK_END),
-   MAKE_ICONSTANT("SEEK_CUR", SEEK_CUR),
-   SLANG_END_ICONST_TABLE
-};
-
-static void destroy_file_type (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   (void) close_file_type ((SL_File_Table_Type *) ptr);
-}
-
-
-struct _SLang_Foreach_Context_Type
-{
-   SLang_MMT_Type *mmt;
-   FILE *fp;
-#define CTX_USE_LINE 1
-#define CTX_USE_CHAR 2
-   unsigned char type;
-};
-
-
-static SLang_Foreach_Context_Type *
-cl_foreach_open (unsigned char type, unsigned int num)
-{
-   SLang_Foreach_Context_Type *c;
-   SLang_MMT_Type *mmt;
-   FILE *fp;
-
-   if (NULL == (mmt = pop_fp (SL_READ, &fp)))
-     return NULL;
-
-   type = CTX_USE_LINE;
-
-   switch (num)
-     {
-	char *s;
-
-      case 0:
-	type = CTX_USE_LINE;
-	break;
-	
-      case 1:
-	if (-1 == SLang_pop_slstring (&s))
-	  {
-	     SLang_free_mmt (mmt);
-	     return NULL;
-	  }
-	if (0 == strcmp (s, "char"))
-	  type = CTX_USE_CHAR;
-	else if (0 == strcmp (s, "line"))
-	  type = CTX_USE_LINE;
-	else
-	  {
-	     SLang_verror (SL_NOT_IMPLEMENTED,
-			   "using '%s' not supported by File_Type",
-			   s);
-	     SLang_free_slstring (s);
-	     SLang_free_mmt (mmt);
-	     return NULL;
-	  }
-	SLang_free_slstring (s);
-	break;
-
-      default:
-	SLdo_pop_n (num);
-	SLang_verror (SL_NOT_IMPLEMENTED, 
-		      "Usage: foreach (File_Type) using ([line|char])");
-	SLang_free_mmt (mmt);
-	return NULL;
-     }
-
-   if (NULL == (c = (SLang_Foreach_Context_Type *) SLmalloc (sizeof (SLang_Foreach_Context_Type))))
-     {
-	SLang_free_mmt (mmt);
-	return NULL;
-     }
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
-   c->type = type;
-   c->mmt = mmt;
-   c->fp = fp;
-
-   return c;
-}
-
-static void cl_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-   SLang_free_mmt (c->mmt);
-   SLfree ((char *) c);
-}
-
-static int cl_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   int status;
-   int ch;
-   unsigned int len;
-   char *s;
-
-   (void) type;
-
-   if (c == NULL)
-     return -1;
-   
-   switch (c->type)
-     {
-      case CTX_USE_CHAR:
-	if (EOF == (ch = getc (c->fp)))
-	  return 0;
-	if (-1 == SLang_push_uchar ((unsigned char) ch))
-	  return -1;
-	return 1;
-
-      case CTX_USE_LINE:
-	status = read_one_line (c->fp, &s, &len);
-	if (status <= 0)
-	  return status;
-	if (0 == _SLang_push_slstring (s))
-	  return 1;
-	return -1;
-     }
-   
-   return -1;
-}
-
-static int Stdio_Initialized;
-static SLang_MMT_Type *Stdio_Mmts[3];
-
-int SLang_init_stdio (void)
-{
-   unsigned int i;
-   SL_File_Table_Type *s;
-   SLang_Class_Type *cl;
-   char *names[3];
-
-   if (Stdio_Initialized)
-     return 0;
-
-   SL_File_Table = (SL_File_Table_Type *)SLcalloc(sizeof (SL_File_Table_Type), SL_MAX_FILES);
-   if (SL_File_Table == NULL)
-     return -1;
-
-   if (NULL == (cl = SLclass_allocate_class ("File_Type")))
-     return -1;
-   cl->cl_destroy = destroy_file_type;
-   cl->cl_foreach_open = cl_foreach_open;
-   cl->cl_foreach_close = cl_foreach_close;
-   cl->cl_foreach = cl_foreach;
-
-
-   if (-1 == SLclass_register_class (cl, SLANG_FILE_PTR_TYPE, sizeof (SL_File_Table_Type), SLANG_CLASS_TYPE_MMT))
-     return -1;
-
-   if ((-1 == SLadd_intrin_fun_table(Stdio_Name_Table, "__STDIO__"))
-       || (-1 == SLadd_iconstant_table (Stdio_Consts, NULL))
-       || (-1 == _SLerrno_init ()))
-     return -1;
-
-   names[0] = "stdin";
-   names[1] = "stdout";
-   names[2] = "stderr";
-
-   s = SL_File_Table;
-   s->fp = stdin;  s->flags = SL_READ;
-
-   s++;
-   s->fp = stdout;  s->flags = SL_WRITE;
-
-   s++;
-   s->fp = stderr;  s->flags = SL_WRITE|SL_READ;
-
-   s = SL_File_Table;
-   for (i = 0; i < 3; i++)
-     {
-	if (NULL == (s->file = SLang_create_slstring (names[i])))
-	  return -1;
-
-	if (NULL == (Stdio_Mmts[i] = SLang_create_mmt (SLANG_FILE_PTR_TYPE, (VOID_STAR) s)))
-	  return -1;
-	SLang_inc_mmt (Stdio_Mmts[i]);
-
-	if (-1 == SLadd_intrinsic_variable (s->file, (VOID_STAR)&Stdio_Mmts[i], SLANG_FILE_PTR_TYPE, 1))
-	  return -1;
-	s++;
-     }
-
-   Stdio_Initialized = 1;
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slstring.c b/mdk-stage1/slang/slstring.c
deleted file mode 100644
index 529c41827..000000000
--- a/mdk-stage1/slang/slstring.c
+++ /dev/null
@@ -1,546 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-typedef struct _SLstring_Type
-{
-   struct _SLstring_Type *next;
-   unsigned int ref_count;
-   char bytes [1];
-}
-SLstring_Type;
-
-static SLstring_Type *String_Hash_Table [SLSTRING_HASH_TABLE_SIZE];
-static char Single_Char_Strings [256 * 2];
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-#define MAX_FREE_STORE_LEN 32
-static SLstring_Type *SLS_Free_Store [MAX_FREE_STORE_LEN];
-
-# define NUM_CACHED_STRINGS 601
-typedef struct 
-{
-   unsigned long hash;
-   SLstring_Type *sls;
-   unsigned int len;
-}
-Cached_String_Type;
-static Cached_String_Type Cached_Strings [NUM_CACHED_STRINGS];
-
-#define GET_CACHED_STRING(s) \
-   (Cached_Strings + (unsigned int)(((unsigned long) (s)) % NUM_CACHED_STRINGS))
-
-_INLINE_
-static void cache_string (SLstring_Type *sls, unsigned int len, unsigned long hash)
-{
-   Cached_String_Type *cs;
-   
-   cs = GET_CACHED_STRING(sls->bytes);
-   cs->sls = sls;
-   cs->hash = hash;
-   cs->len = len;
-}
-
-_INLINE_
-static void uncache_string (char *s)
-{
-   Cached_String_Type *cs;
-   
-   cs = GET_CACHED_STRING(s);
-   if ((cs->sls != NULL)
-       && (cs->sls->bytes == s))
-     cs->sls = NULL;
-}
-#endif
-
-
-
-_INLINE_
-unsigned long _SLstring_hash (unsigned char *s, unsigned char *smax)
-{
-   register unsigned long h = 0;
-   register unsigned long sum = 0;
-   unsigned char *smax4;
-
-   smax4 = smax - 4;
-
-   while (s < smax4)
-     {
-	sum += s[0];
-	h = sum + (h << 1);
-	sum += s[1];
-	h = sum + (h << 1);
-	sum += s[2];
-	h = sum + (h << 1);
-	sum += s[3];
-	h = sum + (h << 1);
-	
-	s += 4;
-     }
-
-   while (s < smax)
-     {
-	sum += *s++;
-	h ^= sum + (h << 3);	       /* slightly different */
-     }
-
-   return h;
-}
-
-unsigned long _SLcompute_string_hash (char *s)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   SLstring_Type *sls;
-
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     return cs->hash;
-#endif
-   return _SLstring_hash ((unsigned char *) s, (unsigned char *) s + strlen (s));
-}
-
-_INLINE_
-/* This routine works with any (long) string */
-static SLstring_Type *find_string (char *s, unsigned int len, unsigned long hash)
-{
-   SLstring_Type *sls;
-   char ch;
-
-   sls = String_Hash_Table [(unsigned int)(hash % SLSTRING_HASH_TABLE_SIZE)];
-
-   if (sls == NULL)
-     return NULL;
-
-   ch = s[0];
-   do
-     {
-	char *bytes = sls->bytes;
-
-	/* Note that we need to actually make sure that bytes[len] == 0. 
-	 * In this case, it is not enough to just compare pointers.  In fact,
-	 * this is called from create_nstring, etc...  It is unlikely that the
-	 * pointer is a slstring
-	 */
-	if ((/* (s == bytes) || */ ((ch == bytes[0])
-		 && (0 == strncmp (s, bytes, len))))
-	    && (bytes [len] == 0))
-	  break;
-
-	sls = sls->next;
-     }
-   while (sls != NULL);
-
-   return sls;
-}
-
-_INLINE_
-static SLstring_Type *find_slstring (char *s, unsigned long hash)
-{
-   SLstring_Type *sls;
-
-   sls = String_Hash_Table [(unsigned int)(hash % SLSTRING_HASH_TABLE_SIZE)];
-   while (sls != NULL)
-     {
-	if (s == sls->bytes)
-	  return sls;
-
-	sls = sls->next;
-     }
-   return sls;
-}
-
-_INLINE_
-static SLstring_Type *allocate_sls (unsigned int len)
-{
-   SLstring_Type *sls;
-   
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if ((len < MAX_FREE_STORE_LEN)
-       && (NULL != (sls = SLS_Free_Store [len])))
-     {
-	SLS_Free_Store[len] = NULL;
-	return sls;
-     }
-#endif
-   /* FIXME: use structure padding */
-   return (SLstring_Type *) SLmalloc (len + sizeof (SLstring_Type));
-}
-
-_INLINE_
-static void free_sls (SLstring_Type *sls, unsigned int len)
-{
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   if ((len < MAX_FREE_STORE_LEN)
-       && (SLS_Free_Store[len] == NULL))
-     {
-	SLS_Free_Store [len] = sls;
-	return;
-     }
-#else
-   (void) len;
-#endif
-   SLfree ((char *)sls);
-}
-
-_INLINE_
-static char *create_long_string (char *s, unsigned int len, unsigned long hash)
-{
-   SLstring_Type *sls;
-
-   sls = find_string (s, len, hash);
-
-   if (sls != NULL)
-     {
-	sls->ref_count++;
-	s = sls->bytes;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	cache_string (sls, len, hash); 
-#endif
-	return s;
-     }
-
-   sls = allocate_sls (len);
-   if (sls == NULL)
-     return NULL;
-
-   strncpy (sls->bytes, s, len);
-   sls->bytes[len] = 0;
-   sls->ref_count = 1;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   cache_string (sls, len, hash);
-#endif
-
-   hash = hash % SLSTRING_HASH_TABLE_SIZE;
-   sls->next = String_Hash_Table [(unsigned int)hash];
-   String_Hash_Table [(unsigned int)hash] = sls;
-
-   return sls->bytes;
-}
-
-_INLINE_
-static char *create_short_string (char *s, unsigned int len)
-{
-   char ch;
-
-   /* Note: if len is 0, then it does not matter what *s is.  This is
-    * important for SLang_create_nslstring.
-    */
-   if (len) ch = *s; else ch = 0;
-
-   len = 2 * (unsigned int) ((unsigned char) ch);
-   Single_Char_Strings [len] = ch;
-   Single_Char_Strings [len + 1] = 0;
-   return Single_Char_Strings + len;
-}
-
-/* s cannot be NULL */
-_INLINE_
-static char *create_nstring (char *s, unsigned int len, unsigned long *hash_ptr)
-{
-   unsigned long hash;
-
-   if (len < 2)
-     return create_short_string (s, len);
-
-   hash = _SLstring_hash ((unsigned char *) s, (unsigned char *) (s + len));
-   *hash_ptr = hash;
-
-   return create_long_string (s, len, hash);
-}
-
-char *SLang_create_nslstring (char *s, unsigned int len)
-{
-   unsigned long hash;
-   return create_nstring (s, len, &hash);
-}
-
-char *_SLstring_make_hashed_string (char *s, unsigned int len, unsigned long *hashptr)
-{
-   unsigned long hash;
-
-   if (s == NULL) return NULL;
-
-   hash = _SLstring_hash ((unsigned char *) s, (unsigned char *) s + len);
-   *hashptr = hash;
-
-   if (len < 2)
-     return create_short_string (s, len);
-
-   return create_long_string (s, len, hash);
-}
-
-char *_SLstring_dup_hashed_string (char *s, unsigned long hash)
-{
-   unsigned int len;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   SLstring_Type *sls;
-   
-   if (s == NULL) return NULL;
-   if (s[0] == 0)
-     return create_short_string (s, 0);
-   if (s[1] == 0)
-     return create_short_string (s, 1);
-     
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     {
-	sls->ref_count += 1;
-	return s;
-     }
-#else
-   if (s == NULL) return NULL;
-#endif
-
-   len = strlen (s);
-#if !_SLANG_OPTIMIZE_FOR_SPEED
-   if (len < 2) return create_short_string (s, len);
-#endif
-
-   return create_long_string (s, len, hash);
-}
-
-char *_SLstring_dup_slstring (char *s)
-{
-   SLstring_Type *sls;
-   unsigned int len;
-   unsigned long hash;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     {
-	sls->ref_count += 1;
-	return s;
-     }
-#endif
-   
-   if ((s == NULL) || ((len = strlen (s)) < 2))
-     return s;
-
-   hash = _SLstring_hash ((unsigned char *)s, (unsigned char *)(s + len));
-
-   sls = find_slstring (s, hash);
-   if (sls == NULL)
-     {
-	SLang_Error = SL_INTERNAL_ERROR;
-	return NULL;
-     }
-   
-   sls->ref_count++;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   cache_string (sls, len, hash);
-#endif
-   return s;
-}
-
-static void free_sls_string (SLstring_Type *sls, char *s, unsigned int len, 
-			     unsigned long hash)
-{
-   SLstring_Type *sls1, *prev;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   uncache_string (s);
-#endif
-
-   hash = hash % SLSTRING_HASH_TABLE_SIZE;
-
-   sls1 = String_Hash_Table [(unsigned int) hash];
-
-   prev = NULL;
-
-   /* This should not fail. */
-   while (sls1 != sls)
-     {
-	prev = sls1;
-	sls1 = sls1->next;
-     }
-
-   if (prev != NULL)
-     prev->next = sls->next;
-   else
-     String_Hash_Table [(unsigned int) hash] = sls->next;
-
-   free_sls (sls, len);
-}
-
-_INLINE_
-static void free_long_string (char *s, unsigned int len, unsigned long hash)
-{
-   SLstring_Type *sls;
-
-   if (NULL == (sls = find_slstring (s, hash)))
-     {
-	SLang_doerror ("Application internal error: invalid attempt to free string");
-	return;
-     }
-
-   sls->ref_count--;
-   if (sls->ref_count != 0)
-     {
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	/* cache_string (sls, len, hash); */
-#endif
-	return;
-     }
-   
-
-   free_sls_string (sls, s, len, hash);
-}
-
-/* This routine may be passed NULL-- it is not an error. */
-void SLang_free_slstring (char *s)
-{
-   unsigned long hash;
-   unsigned int len;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   SLstring_Type *sls;
-
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     {
-	if (sls->ref_count <= 1)
-	  free_sls_string (sls, s, cs->len, cs->hash);
-	else
-	  sls->ref_count -= 1;
-	return;
-     }
-#endif
-
-   if (s == NULL) return;
-
-   if ((len = strlen (s)) < 2)
-     return;
-
-   hash = _SLstring_hash ((unsigned char *)s, (unsigned char *) s + len);
-   free_long_string (s, len, hash);
-}
-
-char *SLang_create_slstring (char *s)
-{
-   unsigned long hash;
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   Cached_String_Type *cs;
-   SLstring_Type *sls;
-
-   cs = GET_CACHED_STRING(s);
-   if (((sls = cs->sls) != NULL)
-       && (sls->bytes == s))
-     {
-	sls->ref_count += 1;
-	return s;
-     }
-#endif
-
-   if (s == NULL) return NULL;
-   return create_nstring (s, strlen (s), &hash);
-}
-
-void _SLfree_hashed_string (char *s, unsigned int len, unsigned long hash)
-{
-   if ((s == NULL) || (len < 2)) return;
-   free_long_string (s, len, hash);
-}
-
-
-char *_SLallocate_slstring (unsigned int len)
-{
-   SLstring_Type *sls = allocate_sls (len);
-   if (sls == NULL)
-     return NULL;
-
-   return sls->bytes;
-}
-
-void _SLunallocate_slstring (char *s, unsigned int len)
-{
-   SLstring_Type *sls;
-   
-   if (s == NULL)
-     return;
-   
-   sls = (SLstring_Type *) (s - offsetof(SLstring_Type,bytes[0]));
-   free_sls (sls, len);
-}
-
-char *_SLcreate_via_alloced_slstring (char *s, unsigned int len)
-{   
-   unsigned long hash;
-   SLstring_Type *sls;
-
-   if (s == NULL)
-     return NULL;
-   
-   if (len < 2)
-     {
-	char *s1 = create_short_string (s, len);
-	_SLunallocate_slstring (s, len);
-	return s1;
-     }
-
-   /* s is not going to be in the cache because when it was malloced, its
-    * value was unknown.  This simplifies the coding.
-    */
-   hash = _SLstring_hash ((unsigned char *)s, (unsigned char *)s + len);
-   sls = find_string (s, len, hash);
-   if (sls != NULL)
-     {
-	sls->ref_count++;
-	_SLunallocate_slstring (s, len);
-	s = sls->bytes;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-	cache_string (sls, len, hash); 
-#endif
-	return s;
-     }
-	
-   sls = (SLstring_Type *) (s - offsetof(SLstring_Type,bytes[0]));
-   sls->ref_count = 1;
-
-#if _SLANG_OPTIMIZE_FOR_SPEED
-   cache_string (sls, len, hash);
-#endif
-
-   hash = hash % SLSTRING_HASH_TABLE_SIZE;
-   sls->next = String_Hash_Table [(unsigned int)hash];
-   String_Hash_Table [(unsigned int)hash] = sls;
-
-   return s;
-}
-
-/* Note, a and b may be ordinary strings.  The result is an slstring */
-char *SLang_concat_slstrings (char *a, char *b)
-{
-   unsigned int lena, len;
-   char *c;
-
-   lena = strlen (a);
-   len = lena + strlen (b);
-
-   c = _SLallocate_slstring (len);
-   if (c == NULL)
-     return NULL;
-
-   strcpy (c, a);
-   strcpy (c + lena, b);
-
-   return _SLcreate_via_alloced_slstring (c, len);
-}
-
diff --git a/mdk-stage1/slang/slstrops.c b/mdk-stage1/slang/slstrops.c
deleted file mode 100644
index a57ef6389..000000000
--- a/mdk-stage1/slang/slstrops.c
+++ /dev/null
@@ -1,1686 +0,0 @@
-/* -*- mode: C; mode: fold; -*- */
-/* string manipulation functions for S-Lang. */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-/*{{{ Include Files */
-
-#include <time.h>
-
-#ifndef __QNX__
-# if defined(__GO32__) || defined(__WATCOMC__)
-#  include <dos.h>
-#  include <bios.h>
-# endif
-#endif
-
-#if SLANG_HAS_FLOAT
-#include <math.h>
-#endif
-
-#include <string.h>
-#include <stdarg.h>
-#include <ctype.h>
-
-#ifndef isdigit
-# define isdigit(x) (((x) >= '0') && ((x) <= '9'))
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-/*}}}*/
-
-#define USE_ALLOC_STSTRING 1
-
-/*{{{ Utility Functions */
-
-static char Utility_Char_Table [256];
-static unsigned char WhiteSpace_Lut[256];
-
-static void set_utility_char_table (char *pos) /*{{{*/
-{
-   register char *t = Utility_Char_Table, *tmax;
-   register unsigned char ch;
-
-   tmax = t + 256;
-   while (t < tmax) *t++ = 0;
-
-   t = Utility_Char_Table;
-   while ((ch = (unsigned char) *pos++) != 0) t[ch] = 1;
-}
-
-/*}}}*/
-
-_INLINE_
-static unsigned char *make_whitespace_lut (void)
-{
-   if (WhiteSpace_Lut[' '] != 1)
-     {
-	WhiteSpace_Lut[' '] = WhiteSpace_Lut['\r'] 
-	  = WhiteSpace_Lut ['\n'] = WhiteSpace_Lut['\t']
-	  = WhiteSpace_Lut ['\f'] = 1;
-     }
-   return WhiteSpace_Lut;
-}
-
-static unsigned char *make_lut (unsigned char *s, unsigned char *lut)
-{
-   int reverse = 0;
-   
-   if (*s == '^')
-     {
-	reverse = 1;
-	s++;
-     }
-   SLmake_lut (lut, s, reverse);
-   return lut;
-}
-
-static unsigned int do_trim (char **beg, int do_beg, 
-			     char **end, int do_end, 
-			     char *white) /*{{{*/
-{
-   unsigned int len;
-   char *a, *b;
-
-   set_utility_char_table (white);
-
-   a = *beg;
-   len = strlen (a);
-   b = a + len;
-
-   if (do_beg)
-     while (Utility_Char_Table[(unsigned char) *a]) a++;
-
-   if (do_end)
-     {
-	b--;
-	while ((b >= a) && (Utility_Char_Table[(unsigned char) *b])) b--;
-	b++;
-     }
-
-   len = (unsigned int) (b - a);
-   *beg = a;
-   *end = b;
-   return len;
-}
-
-/*}}}*/
-
-/*}}}*/
-
-static int pop_3_strings (char **a, char **b, char **c)
-{
-   *a = *b = *c = NULL;
-   if (-1 == SLpop_string (c))
-     return -1;
-   
-   if (-1 == SLpop_string (b))
-     {
-	SLfree (*c);
-	*c = NULL;
-	return -1;
-     }
-
-   if (-1 == SLpop_string (a))
-     {
-	SLfree (*b);
-	SLfree (*c);
-	*b = *c = NULL;
-	return -1;
-     }
-   
-   return 0;
-}
-
-static void free_3_strings (char *a, char *b, char *c)
-{
-   SLfree (a);
-   SLfree (b);
-   SLfree (c);
-}
-
-static void strcat_cmd (void) /*{{{*/
-{
-   char *c, *c1;
-   int nargs;
-   int i;
-   char **ptrs;
-   unsigned int len;
-#if !USE_ALLOC_STSTRING
-   char buf[256];
-#endif
-   nargs = SLang_Num_Function_Args;
-   if (nargs <= 0) nargs = 2;
-
-   if (NULL == (ptrs = (char **)SLmalloc (nargs * sizeof (char *))))
-     return;
-
-   memset ((char *) ptrs, 0, sizeof (char *) * nargs);
-
-   c = NULL;
-   i = nargs;
-   len = 0;
-   while (i != 0)
-     {
-	char *s;
-
-	i--;
-	if (-1 == SLang_pop_slstring (&s))
-	  goto free_and_return;
-	ptrs[i] = s;
-	len += strlen (s);
-     }
-#if USE_ALLOC_STSTRING
-   if (NULL == (c = _SLallocate_slstring (len)))
-     goto free_and_return;
-#else
-   len++;			       /* \0 char */
-   if (len <= sizeof (buf))
-     c = buf;
-   else if (NULL == (c = SLmalloc (len)))
-     goto free_and_return;
-#endif
-
-   c1 = c;
-   for (i = 0; i < nargs; i++)
-     {
-	strcpy (c1, ptrs[i]);
-	c1 += strlen (c1);
-     }
-   
-   free_and_return:
-   for (i = 0; i < nargs; i++)
-     SLang_free_slstring (ptrs[i]);
-   SLfree ((char *) ptrs);
-
-#if USE_ALLOC_STSTRING
-   (void) _SLpush_alloced_slstring (c, len);
-#else
-   if (c != buf)
-     (void) SLang_push_malloced_string (c);   /* NULL ok */
-   else
-     (void) SLang_push_string (c);
-#endif
-}
-
-/*}}}*/
-
-static int _SLang_push_nstring (char *a, unsigned int len)
-{
-   a = SLang_create_nslstring (a, len);
-   if (a == NULL)
-     return -1;
-   
-   return _SLang_push_slstring (a);
-}
-
-
-static void strtrim_cmd_internal (char *str, int do_beg, int do_end)
-{
-   char *beg, *end, *white;
-   int free_str;
-   unsigned int len;
-
-   /* Go through SLpop_string to get a private copy since it will be
-    * modified.
-    */
-   
-   free_str = 0;
-   if (SLang_Num_Function_Args == 2)
-     {
-	white = str;
-	if (-1 == SLang_pop_slstring (&str))
-	  return;
-	free_str = 1;
-     }
-   else white = " \t\f\r\n";
-
-   beg = str;
-   len = do_trim (&beg, do_beg, &end, do_end, white);
-   
-   (void) _SLang_push_nstring (beg, len);
-   if (free_str)
-     SLang_free_slstring (str);
-}
-
-   
-static void strtrim_cmd (char *str)
-{
-   strtrim_cmd_internal (str, 1, 1);
-}
-
-static void strtrim_beg_cmd (char *str)
-{
-   strtrim_cmd_internal (str, 1, 0);
-}
-
-static void strtrim_end_cmd (char *str)
-{
-   strtrim_cmd_internal (str, 0, 1);
-}
-
-
-static void strcompress_cmd (void) /*{{{*/
-{
-   char *str, *white, *c;
-   unsigned char *s, *beg, *end;
-   unsigned int len;
-   char pref_char;
-
-   if (SLpop_string (&white)) return;
-   if (SLpop_string (&str))
-     {
-	SLfree (white);
-	return;
-     }
-
-   /* The first character of white is the preferred whitespace character */
-   pref_char = *white;
-
-   beg = (unsigned char *) str;
-   (void) do_trim ((char **) &beg, 1, (char **) &end, 1, white);
-   SLfree (white);
-
-   /* Determine the effective length */
-   len = 0;
-   s = (unsigned char *) beg;
-   while (s < end)
-     {
-	len++;
-	if (Utility_Char_Table[*s++])
-	  {
-	     while ((s < end) && Utility_Char_Table[*s]) s++;
-	  }
-     }
-
-#if USE_ALLOC_STSTRING
-   c = _SLallocate_slstring (len);
-#else
-   c = SLmalloc (len + 1);
-#endif
-   if (c == NULL)
-     {
-	SLfree (str);
-	return;
-     }
-   
-   s = (unsigned char *) c;
-
-   while (beg < end)
-     {
-	unsigned char ch = *beg++;
-	
-	if (0 == Utility_Char_Table[ch])
-	  {
-	     *s++ = ch;
-	     continue;
-	  }
-	
-	*s++ = (unsigned char) pref_char;
-	
-	while ((beg < end) && Utility_Char_Table[*beg]) 
-	  beg++;
-     }
-
-   *s = 0;
-   
-#if USE_ALLOC_STSTRING
-   (void) _SLpush_alloced_slstring (c, len);
-#else
-   SLang_push_malloced_string(c);
-#endif
-
-   SLfree(str);
-}
-
-/*}}}*/
-
-static int str_replace_cmd_1 (char *orig, char *match, char *rep, unsigned int max_num_replaces,
-			      char **new_strp) /*{{{*/
-{
-   char *s, *t, *new_str;
-   unsigned int rep_len, match_len, new_len;
-   unsigned int num_replaces;
-
-   *new_strp = NULL;
-
-   match_len = strlen (match);
-
-   if (match_len == 0)
-     return 0;
-
-   num_replaces = 0;
-   s = orig;
-   while (num_replaces < max_num_replaces)
-     {
-	s = strstr (s, match);
-	if (s == NULL)
-	  break;
-	s += match_len;
-	num_replaces++;
-     }
-
-   if (num_replaces == 0)
-     return 0;
-
-   max_num_replaces = num_replaces;
-
-   rep_len = strlen (rep);
-
-   new_len = (strlen (orig) - num_replaces * match_len) + num_replaces * rep_len;
-   new_str = SLmalloc (new_len + 1);
-   if (new_str == NULL)
-     return -1;
-   
-   s = orig;
-   t = new_str;
-   
-   for (num_replaces = 0; num_replaces < max_num_replaces; num_replaces++)
-     {
-	char *next_s;
-	unsigned int len;
-
-	next_s = strstr (s, match);    /* cannot be NULL */
-	len = (unsigned int) (next_s - s);
-	strncpy (t, s, len);
-	t += len;
-	strcpy (t, rep);
-	t += rep_len;
-	
-	s = next_s + match_len;
-     }
-   strcpy (t, s);
-   *new_strp = new_str;
-
-   return (int) num_replaces;
-}
-
-/*}}}*/
-
-static void reverse_string (char *a)
-{
-   char *b;
-   
-   b = a + strlen (a);
-   while (b > a)
-     {
-	char ch;
-
-	b--;
-	ch = *a;
-	*a++ = *b;
-	*b = ch;
-     }
-}
-
-static int strreplace_cmd (int *np)
-{   
-   char *orig, *match, *rep;
-   char *new_str;
-   int max_num_replaces;
-   int ret;
-
-   max_num_replaces = *np;
-
-   if (-1 == pop_3_strings (&orig, &match, &rep))
-     return -1;
-
-   if (max_num_replaces < 0)
-     {
-	reverse_string (orig);
-	reverse_string (match);
-	reverse_string (rep);
-	ret = str_replace_cmd_1 (orig, match, rep, -max_num_replaces, &new_str);
-	if (ret > 0) reverse_string (new_str);
-	else if (ret == 0)
-	  reverse_string (orig);
-     }
-   else ret = str_replace_cmd_1 (orig, match, rep, max_num_replaces, &new_str);
-   
-   if (ret == 0)
-     {
-	if (-1 == SLang_push_malloced_string (orig))
-	  ret = -1;
-	orig = NULL;
-     }
-   else if (ret > 0)
-     {
-	if (-1 == SLang_push_malloced_string (new_str))
-	  ret = -1;
-     }
-
-   free_3_strings (orig, match, rep);
-   return ret;
-}
-
-static int str_replace_cmd (char *orig, char *match, char *rep)
-{
-   char *s;
-   int ret;
-
-   ret = str_replace_cmd_1 (orig, match, rep, 1, &s);
-   if (ret == 1)
-     (void) SLang_push_malloced_string (s);
-   return ret;
-}
-
-	
-     
-static void strtok_cmd (char *str)
-{
-   _SLString_List_Type sl;
-   unsigned char white_buf[256];
-   char *s;
-   unsigned char *white;
-   
-   if (SLang_Num_Function_Args == 1)
-     white = make_whitespace_lut ();
-   else
-     {
-	white = white_buf;
-	make_lut ((unsigned char *)str, white);
-	if (-1 == SLang_pop_slstring (&str))
-	  return;
-     }
-
-   if (-1 == _SLstring_list_init (&sl, 256, 1024))
-     goto the_return;
-
-   s = str;
-   while (*s != 0)
-     {
-	char *s0;
-
-	s0 = s;
-	/* Skip whitespace */
-	while ((*s0 != 0) && (0 != white[(unsigned char)*s0]))
-	  s0++;
-
-	if (*s0 == 0)
-	  break;
-
-	s = s0;
-	while ((*s != 0) && (0 == white[(unsigned char) *s]))
-	  s++;
-
-	/* sl deleted upon failure */
-	if (-1 == _SLstring_list_append (&sl, SLang_create_nslstring (s0, (unsigned int) (s - s0))))
-	  goto the_return;
-     }
-
-   /* Deletes sl */
-   (void) _SLstring_list_push (&sl);
-
-   the_return:
-   if (white == white_buf)
-     SLang_free_slstring (str);
-}
-
-/* This routine returns the string with text removed between single character
-   comment delimiters from the set b and e. */
-
-static void str_uncomment_string_cmd (char *str, char *b, char *e) /*{{{*/
-{
-   unsigned char chb, che;
-   unsigned char *s, *cbeg, *mark;
-
-   if (strlen(b) != strlen(e))
-     {
-	SLang_doerror ("Comment delimiter length mismatch.");
-	return;
-     }
-
-   set_utility_char_table (b);
-
-   if (NULL == (str = (char *) SLmake_string(str))) return;
-
-   s = (unsigned char *) str;
-
-   while ((chb = *s++) != 0)
-     {
-	if (Utility_Char_Table [chb] == 0) continue;
-
-	mark = s - 1;
-
-	cbeg = (unsigned char *) b;
-	while (*cbeg != chb) cbeg++;
-
-	che = (unsigned char) *(e + (int) (cbeg - (unsigned char *) b));
-
-	while (((chb = *s++) != 0) && (chb != che));
-
-	if (chb == 0)
-	  {
-	     /* end of string and end not found.  Just truncate it a return; */
-	     *mark = 0;
-	     break;
-	  }
-
-	strcpy ((char *) mark, (char *)s);
-	s = mark;
-     }
-   SLang_push_malloced_string (str);
-}
-
-/*}}}*/
-
-static void str_quote_string_cmd (char *str, char *quotes, int *slash_ptr) /*{{{*/
-{
-   char *q;
-   int slash;
-   unsigned int len;
-   register char *t, *s, *q1;
-   register unsigned char ch;
-
-   slash = *slash_ptr;
-
-   if ((slash > 255) || (slash < 0))
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return;
-     }
-
-   /* setup the utility table to have 1s at quote char postitions. */
-   set_utility_char_table (quotes);
-
-   t = Utility_Char_Table;
-   t[(unsigned int) slash] = 1;
-
-   /* calculate length */
-   s = str;
-   len = 0;
-   while ((ch = (unsigned char) *s++) != 0) if (t[ch]) len++;
-   len += (unsigned int) (s - str);
-
-   if (NULL != (q = SLmalloc(len)))
-     {
-	s = str; q1 = q;
-	while ((ch = (unsigned char) *s++) != 0)
-	  {
-	     if (t[ch]) *q1++ = slash;
-	     *q1++ = (char) ch;
-	  }
-	*q1 = 0;
-	SLang_push_malloced_string(q);
-     }
-}
-
-/*}}}*/
-
-/* returns the position of substrin in a string or null */
-static int issubstr_cmd (char *a, char *b) /*{{{*/
-{
-   char *c;
-
-   if (NULL == (c = (char *) strstr(a, b)))
-     return 0;
-
-   return 1 + (int) (c - a);
-}
-
-/*}}}*/
-
-/* returns to stack string at pos n to n + m of a */
-static void substr_cmd (char *a, int *n_ptr, int *m_ptr) /*{{{*/
-{
-   int n, m;
-   int lena;
-
-   n = *n_ptr;
-   m = *m_ptr;
-
-   lena = strlen (a);
-   if (n > lena) n = lena + 1;
-   if (n < 1)
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return;
-     }
-
-   n--;
-   if (m < 0) m = lena;
-   if (n + m > lena) m = lena - n;
-   
-   (void) _SLang_push_nstring (a + n, (unsigned int) m);
-}
-
-/*}}}*/
-
-/* substitute char m at positin string n in string*/
-static void strsub_cmd (int *nptr, int *mptr) /*{{{*/
-{
-   char *a;
-   int n, m;
-   unsigned int lena;
-
-   if (-1 == SLpop_string (&a))
-     return;
-
-   n = *nptr;
-   m = *mptr;
-
-   lena = strlen (a);
-
-   if ((n <= 0) || (lena < (unsigned int) n))
-     {
-	SLang_Error = SL_INVALID_PARM;
-	SLfree(a);
-	return;
-     }
-
-   a[n - 1] = (char) m;
-
-   SLang_push_malloced_string (a);
-}
-
-/*}}}*/
-
-static void strup_cmd(void) /*{{{*/
-{
-   unsigned char c, *a;
-   char *str;
-
-   if (SLpop_string (&str))
-     return;
-
-   a = (unsigned char *) str;
-   while ((c = *a) != 0)
-     {
-	/* if ((*a >= 'a') && (*a <= 'z')) *a -= 32; */
-	*a = UPPER_CASE(c);
-	a++;
-     }
-
-   SLang_push_malloced_string (str);
-}
-
-/*}}}*/
-
-static int isdigit_cmd (char *what) /*{{{*/
-{
-   return isdigit((unsigned char)*what);
-}
-
-/*}}}*/
-static int toupper_cmd (int *ch) /*{{{*/
-{
-   return UPPER_CASE(*ch);
-}
-
-/*}}}*/
-
-static int tolower_cmd (int *ch) /*{{{*/
-{
-   return LOWER_CASE(*ch);
-}
-
-/*}}}*/
-
-static void strlow_cmd (void) /*{{{*/
-{
-   unsigned char c, *a;
-   char *str;
-
-   if (SLpop_string(&str)) return;
-   a = (unsigned char *) str;
-   while ((c = *a) != 0)
-     {
-	/* if ((*a >= 'a') && (*a <= 'z')) *a -= 32; */
-	*a = LOWER_CASE(c);
-	a++;
-     }
-
-   SLang_push_malloced_string ((char *) str);
-}
-
-/*}}}*/
-
-static SLang_Array_Type *do_strchop (char *str, int delim, int quote)
-{
-   int count;
-   char *s0, *elm;
-   register char *s1;
-   register unsigned char ch;
-   int quoted;
-   SLang_Array_Type *at;
-   char **data;
-
-   if ((quote < 0) || (quote > 255)
-       || (delim <= 0) || (delim > 255))
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return NULL;
-     }
-
-   s1 = s0 = str;
-
-   quoted = 0;
-   count = 1;			       /* at least 1 */
-   while (1)
-     {
-	ch = (unsigned char) *s1++;
-	if ((ch == quote) && quote)
-	  {
-	     if (*s1 == 0)
-	       break;
-
-	     s1++;
-	     continue;
-	  }
-
-	if (ch == delim)
-	  {
-	     count++;
-	     continue;
-	  }
-
-	if (ch == 0)
-	  break;
-     }
-
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &count, 1)))
-     return NULL;
-
-   data = (char **)at->data;
-
-   count = 0;
-   s1 = s0;
-
-   while (1)
-     {
-	ch = (unsigned char) *s1;
-
-	if ((ch == quote) && quote)
-	  {
-	     s1++;
-	     if (*s1 != 0) s1++;
-	     quoted = 1;
-	     continue;
-	  }
-
-	if ((ch == delim) || (ch == 0))
-	  {
-	     if (quoted == 0)
-	       elm = SLang_create_nslstring (s0, (unsigned int) (s1 - s0));
-	     else
-	       {
-		  register char ch1, *p, *p1;
-		  char *tmp;
-
-		  tmp = SLmake_nstring (s0, (unsigned int)(s1 - s0));
-		  if (tmp == NULL)
-		    break;
-
-		  /* Now unquote it */
-		  p = p1 = tmp;
-		  do
-		    {
-		       ch1 = *p1++;
-		       if (ch1 == '\\') ch1 = *p1++;
-		       *p++ = ch1;
-		    }
-		  while (ch1 != 0);
-		  quoted = 0;
-
-		  elm = SLang_create_slstring (tmp);
-		  SLfree (tmp);
-	       }
-
-	     if (elm == NULL)
-	       break;
-
-	     data[count] = elm;
-	     count++;
-
-	     if (ch == 0)
-	       return at;
-
-	     s1++;		       /* skip past delim */
-	     s0 = s1;		       /* and reset */
-	  }
-	else s1++;
-     }
-
-   SLang_free_array (at);
-   return NULL;
-}
-
-static void strchop_cmd (char *str, int *q, int *d)
-{
-   (void) SLang_push_array (do_strchop (str, *q, *d), 1);
-}
-
-static void strchopr_cmd (char *str, int *q, int *d)
-{
-   SLang_Array_Type *at;
-
-   if (NULL != (at = do_strchop (str, *q, *d)))
-     {
-	char **d0, **d1;
-
-	d0 = (char **) at->data;
-	d1 = d0 + (at->num_elements - 1);
-
-	while (d0 < d1)
-	  {
-	     char *tmp;
-
-	     tmp = *d0;
-	     *d0 = *d1;
-	     *d1 = tmp;
-	     d0++;
-	     d1--;
-	  }
-     }
-   SLang_push_array (at, 1);
-}
-
-static int strcmp_cmd (char *a, char *b) /*{{{*/
-{
-   return strcmp(a, b);
-}
-
-/*}}}*/
-
-static int strncmp_cmd (char *a, char *b, int *n) /*{{{*/
-{
-   return strncmp(a, b, (unsigned int) *n);
-}
-
-/*}}}*/
-
-static int strlen_cmd (char *s) /*{{{*/
-{
-   return (int) strlen (s);
-}
-/*}}}*/
-
-static void extract_element_cmd (char *list, int *nth_ptr, int *delim_ptr)
-{
-   char buf[1024], *b;
-
-   b = buf;
-   if (-1 == SLextract_list_element (list, *nth_ptr, *delim_ptr, buf, sizeof(buf)))
-     b = NULL;
-
-   SLang_push_string (b);
-}
-
-/* sprintf functionality for S-Lang */
-
-static char *SLdo_sprintf (char *fmt) /*{{{*/
-{
-   register char *p = fmt, ch;
-   char *out = NULL, *outp = NULL;
-   char dfmt[1024];	       /* used to hold part of format */
-   char *f;
-   VOID_STAR varp;
-   int want_width, width, precis, use_varp, int_var;
-   long long_var;
-   unsigned int len = 0, malloc_len = 0, dlen;
-   int do_free, guess_size;
-#if SLANG_HAS_FLOAT
-   int tmp1, tmp2, use_double;
-   double x;
-#endif
-   int use_long = 0;
-
-   while (1)
-     {
-	while ((ch = *p) != 0)
-	  {
-	     if (ch == '%')
-	       break;
-	     p++;
-	  }
-
-	/* p points at '%' or 0 */
-
-	dlen = (unsigned int) (p - fmt);
-
-	if (len + dlen >= malloc_len)
-	  {
-	     malloc_len = len + dlen;
-	     if (out == NULL) outp = SLmalloc(malloc_len + 1);
-	     else outp = SLrealloc(out, malloc_len + 1);
-	     if (NULL == outp)
-	       return out;
-	     out = outp;
-	     outp = out + len;
-	  }
-
-	strncpy(outp, fmt, dlen);
-	len += dlen;
-	outp = out + len;
-	*outp = 0;
-	if (ch == 0) break;
-
-	/* bump it beyond '%' */
-	++p;
-	fmt = p;
-
-	f = dfmt;
-	*f++ = ch;
-	/* handle flag char */
-	ch = *p++;
-
-	/* Make sure cases such as "% #g" can be handled. */
-	if ((ch == '-') || (ch == '+') || (ch == ' ') || (ch == '#'))
-	  {
-	     *f++ = ch;
-	     ch = *p++;
-	     if ((ch == '-') || (ch == '+') || (ch == ' ') || (ch == '#'))
-	       {
-		  *f++ = ch;
-		  ch = *p++;
-	       }
-	  }
-
-
-	/* width */
-	/* I have got to parse it myself so that I can see how big it needs
-	 * to be.
-	 */
-	want_width = width = 0;
-	if (ch == '*')
-	  {
-	     if (SLang_pop_integer(&width)) return (out);
-	     want_width = 1;
-	     ch = *p++;
-	  }
-	else
-	  {
-	     if (ch == '0')
-	       {
-		  *f++ = '0';
-		  ch = *p++;
-	       }
-
-	     while ((ch <= '9') && (ch >= '0'))
-	       {
-		  width = width * 10 + (ch - '0');
-		  ch = *p++;
-		  want_width = 1;
-	       }
-	  }
-
-	if (want_width)
-	  {
-	     sprintf(f, "%d", width);
-	     f += strlen (f);
-	  }
-	precis = 0;
-	/* precision -- also indicates max number of chars from string */
-	if (ch == '.')
-	  {
-	     *f++ = ch;
-	     ch = *p++;
-	     want_width = 0;
-	     if (ch == '*')
-	       {
-		  if (SLang_pop_integer(&precis)) return (out);
-		  ch = *p++;
-		  want_width = 1;
-	       }
-	     else while ((ch <= '9') && (ch >= '0'))
-	       {
-		  precis = precis * 10 + (ch - '0');
-		  ch = *p++;
-		  want_width = 1;
-	       }
-	     if (want_width)
-	       {
-		  sprintf(f, "%d", precis);
-		  f += strlen (f);
-	       }
-	     else precis = 0;
-	  }
-
-	long_var = 0;
-	int_var = 0;
-	varp = NULL;
-	guess_size = 32;
-#if SLANG_HAS_FLOAT
-	use_double = 0;
-#endif
-	use_long = 0;
-	use_varp = 0;
-	do_free = 0;
-
-	if (ch == 'l')
-	  {
-	     use_long = 1;
-	     ch = *p++;
-	  }
-	else if (ch == 'h') ch = *p++; /* not supported */
-
-	/* Now the actual format specifier */
-	switch (ch)
-	  {
-	   case 'S':
-	     _SLstring_intrinsic ();
-	     ch = 's';
-	     /* drop */
-	   case 's':
-	     if (SLang_pop_slstring((char **) &varp)) return (out);
-	     do_free = 1;
-	     guess_size = strlen((char *) varp);
-	     use_varp = 1;
-	     break;
-
-	   case '%':
-	     guess_size = 1;
-	     do_free = 0;
-	     use_varp = 1;
-	     varp = (VOID_STAR) "%";
-	     break;
-
-	   case 'c': guess_size = 1;
-	     use_long = 0;
-	     /* drop */
-	   case 'd':
-	   case 'i':
-	   case 'o':
-	   case 'u':
-	   case 'X':
-	   case 'x':
-	     if (SLang_pop_long (&long_var)) return(out);
-	     if (use_long == 0)
-	       int_var = (int) long_var;
-	     else
-	       *f++ = 'l';
-	     break;
-
-	   case 'f':
-	   case 'e':
-	   case 'g':
-	   case 'E':
-	   case 'G':
-#if SLANG_HAS_FLOAT
-	     if (SLang_pop_double(&x, &tmp1, &tmp2)) return (out);
-	     use_double = 1;
-	     guess_size = 256;
-	     (void) tmp1; (void) tmp2;
-	     use_long = 0;
-	     break;
-#endif
-	   case 'p':
-	     guess_size = 32;
-	     /* Pointer type?? Why?? */
-	     if (-1 == SLdo_pop ())
-	       return out;
-	     varp = (VOID_STAR) _SLStack_Pointer;
-	     use_varp = 1;
-	     use_long = 0;
-	     break;
-
-	   default:
-	     SLang_doerror("Invalid Format.");
-	     return(out);
-	  }
-	*f++ = ch; *f = 0;
-
-	width = width + precis;
-	if (width > guess_size) guess_size = width;
-
-	if (len + guess_size > malloc_len)
-	  {
-	     outp = (char *) SLrealloc(out, len + guess_size + 1);
-	     if (outp == NULL)
-	       {
-		  SLang_Error = SL_MALLOC_ERROR;
-		  return (out);
-	       }
-	     out = outp;
-	     outp = out + len;
-	     malloc_len = len + guess_size;
-	  }
-
-	if (use_varp)
-	  {
-	     sprintf(outp, dfmt, varp);
-	     if (do_free) SLang_free_slstring ((char *)varp);
-	  }
-#if SLANG_HAS_FLOAT
-	else if (use_double) sprintf(outp, dfmt, x);
-#endif
-	else if (use_long) sprintf (outp, dfmt, long_var);
-	else sprintf(outp, dfmt, int_var);
-
-	len += strlen(outp);
-	outp = out + len;
-	fmt = p;
-     }
-
-   if (out != NULL)
-     {
-	outp = SLrealloc (out, (unsigned int) (outp - out) + 1);
-	if (outp != NULL) out = outp;
-     }
-
-   return (out);
-}
-
-/*}}}*/
-
-int _SLstrops_do_sprintf_n (int n) /*{{{*/
-{
-   char *p;
-   char *fmt;
-   SLang_Object_Type *ptr;
-   int ofs;
-
-   if (-1 == (ofs = SLreverse_stack (n + 1)))
-     return -1;
-
-   ptr = _SLRun_Stack + ofs;
-
-   if (SLang_pop_slstring(&fmt))
-     return -1;
-
-   p = SLdo_sprintf (fmt);
-   SLang_free_slstring (fmt);
-
-   while (_SLStack_Pointer > ptr)
-     SLdo_pop ();
-
-   if (SLang_Error)
-     {
-	SLfree (p);
-	return -1;
-     }
-   
-   return SLang_push_malloced_string (p);
-}
-
-/*}}}*/
-
-static void sprintf_n_cmd (int *n)
-{
-   _SLstrops_do_sprintf_n (*n);
-}
-
-static void sprintf_cmd (void)
-{
-   _SLstrops_do_sprintf_n (SLang_Num_Function_Args - 1);    /* do not include format */
-}
-
-/* converts string s to a form that can be used in an eval */
-static void make_printable_string(char *s) /*{{{*/
-{
-   unsigned int len;
-   register char *s1 = s, ch, *ss1;
-   char *ss;
-
-   /* compute length */
-   len = 3;
-   while ((ch = *s1++) != 0)
-     {
-	if ((ch == '\n') || (ch == '\\') || (ch == '"')) len++;
-	len++;
-     }
-
-   if (NULL == (ss = SLmalloc(len)))
-     return;
-
-   s1 = s;
-   ss1 = ss;
-   *ss1++ = '"';
-   while ((ch = *s1++) != 0)
-     {
-	if (ch == '\n')
-	  {
-	     ch = 'n';
-	     *ss1++ = '\\';
-	  }
-	else if ((ch == '\\') || (ch == '"'))
-	  {
-	     *ss1++ = '\\';
-	  }
-	*ss1++ = ch;
-     }
-   *ss1++ = '"';
-   *ss1 = 0;
-   if (-1 == SLang_push_string (ss))
-     SLfree (ss);
-}
-
-/*}}}*/
-
-static int is_list_element_cmd (char *list, char *elem, int *d_ptr)
-{
-   char ch;
-   int d, n;
-   unsigned int len;
-   char *lbeg, *lend;
-
-   d = *d_ptr;
-
-   len = strlen (elem);
-
-   n = 1;
-   lend = list;
-
-   while (1)
-     {
-	lbeg = lend;
-	while ((0 != (ch = *lend)) && (ch != (char) d)) lend++;
-
-	if ((lbeg + len == lend)
-	    && (0 == strncmp (elem, lbeg, len)))
-	  break;
-
-	if (ch == 0)
-	  {
-	     n = 0;
-	     break;
-	  }
-	lend++;			       /* skip delim */
-	n++;
-     }
-
-   return n;
-}
-
-/*}}}*/
-
-/* Regular expression routines for strings */
-static SLRegexp_Type regexp_reg;
-
-static int string_match_cmd (char *str, char *pat, int *nptr) /*{{{*/
-{
-   int n;
-   unsigned int len;
-   unsigned char rbuf[512], *match;
-
-   n = *nptr;
-
-   regexp_reg.case_sensitive = 1;
-   regexp_reg.buf = rbuf;
-   regexp_reg.pat = (unsigned char *) pat;
-   regexp_reg.buf_len = sizeof (rbuf);
-
-   if (SLang_regexp_compile (&regexp_reg))
-     {
-	SLang_verror (SL_INVALID_PARM, "Unable to compile pattern");
-	return -1;
-     }
-
-   n--;
-   len = strlen(str);
-   if ((n < 0) || ((unsigned int) n >= len))
-     {
-	/* SLang_Error = SL_INVALID_PARM; */
-	return 0;
-     }
-
-   str += n;
-   len -= n;
-
-   if (NULL == (match = SLang_regexp_match((unsigned char *) str, len, &regexp_reg)))
-     return 0;
-
-   /* adjust offsets */
-   regexp_reg.offset = n;
-
-   return (1 + (int) ((char *) match - str));
-}
-
-/*}}}*/
-
-static int string_match_nth_cmd (int *nptr) /*{{{*/
-{
-   int n, beg;
-
-   n = *nptr;
-
-   if ((n < 0) || (n > 9) || (regexp_reg.pat == NULL)
-       || ((beg = regexp_reg.beg_matches[n]) == -1))
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return -1;
-     }
-   SLang_push_integer(beg + regexp_reg.offset);
-   return regexp_reg.end_matches[n];
-}
-
-/*}}}*/
-
-static char *create_delimited_string (char **list, unsigned int n, 
-				      char *delim)
-{
-   unsigned int len, dlen;
-   unsigned int i;
-   unsigned int num;
-   char *str, *s;
-
-   len = 1;			       /* allow room for \0 char */
-   num = 0;
-   for (i = 0; i < n; i++)
-     {
-	if (list[i] == NULL) continue;
-	len += strlen (list[i]);
-	num++;
-     }
-
-   dlen = strlen (delim);
-   if (num > 1)
-     len += (num - 1) * dlen;
-
-   if (NULL == (str = SLmalloc (len)))
-     return NULL;
-
-   *str = 0;
-   s = str;
-   i = 0;
-	
-   while (num > 1)
-     {
-	while (list[i] == NULL)
-	  i++;
-	
-	strcpy (s, list[i]);
-	s += strlen (list[i]);
-	strcpy (s, delim);
-	s += dlen;
-	i++;
-	num--;
-     }
-   
-   if (num)
-     {
-	while (list[i] == NULL)
-	  i++;
-	
-	strcpy (s, list[i]);
-     }
-   
-   return str;
-}
-
-static void create_delimited_string_cmd (int *nptr)
-{
-   unsigned int n, i;
-   char **strings;
-   char *str;
-
-   str = NULL;
-
-   n = 1 + (unsigned int) *nptr;       /* n includes delimiter */
-
-   if (NULL == (strings = (char **)SLmalloc (n * sizeof (char *))))
-     {
-	SLdo_pop_n (n);
-	return;
-     }
-   memset((char *)strings, 0, n * sizeof (char *));
-
-   i = n;
-   while (i != 0)
-     {
-	i--;
-	if (-1 == SLang_pop_slstring (strings + i))
-	  goto return_error;
-     }
-
-   str = create_delimited_string (strings + 1, (n - 1), strings[0]);
-   /* drop */
-   return_error:
-   for (i = 0; i < n; i++) SLang_free_slstring (strings[i]);
-   SLfree ((char *)strings);
-
-   (void) SLang_push_malloced_string (str);   /* NULL Ok */
-}
-
-static void strjoin_cmd (char *delim)
-{
-   SLang_Array_Type *at;
-   char *str;
-
-   if (-1 == SLang_pop_array_of_type (&at, SLANG_STRING_TYPE))
-     return;
-   
-   str = create_delimited_string ((char **)at->data, at->num_elements, delim);
-   SLang_free_array (at);
-   (void) SLang_push_malloced_string (str);   /* NULL Ok */
-}
-
-static void str_delete_chars_cmd (char *s, char *d)
-{
-   unsigned char lut[256];
-   unsigned char *s1, *s2;
-   unsigned char ch;
-
-   make_lut ((unsigned char *)d, lut);
-   if (NULL == (s = SLmake_string (s)))
-     return;
-
-   s1 = s2 = (unsigned char *) s;
-   while ((ch = *s2++) != 0)
-     {
-	if (0 == lut[ch])
-	  *s1++ = ch;
-     }
-   *s1 = 0;
-   
-   (void) SLang_push_malloced_string (s);
-}
-
-static unsigned char *make_lut_string (unsigned char *s)
-{
-   unsigned char lut[256];
-   unsigned char *l;
-   unsigned int i;
-
-   /* Complement-- a natural order is imposed */
-   make_lut (s, lut);
-   l = lut;
-   for (i = 1; i < 256; i++)
-     {
-	if (lut[i])
-	  *l++ = (unsigned char) i;
-     }
-   *l = 0;
-   return (unsigned char *) SLmake_string ((char *)lut);
-}
-
-static unsigned char *make_str_range (unsigned char *s)
-{
-   unsigned char *s1, *range;
-   unsigned int num;
-   unsigned char ch;
-   int len;
-
-   if (*s == '^')
-     return make_lut_string (s);
-
-   num = 0;
-   s1 = s;
-   while ((ch = *s1++) != 0)
-     {
-	unsigned char ch1;
-
-	ch1 = *s1;
-	if (ch1 == '-')
-	  {
-	     s1++;
-	     ch1 = *s1;
-	     len = (int)ch1 - (int)ch;
-	     if (len < 0)
-	       len = -len;
-	     
-	     num += (unsigned int) len;
-	     if (ch1 != 0)
-	       s1++;
-	  }
-
-	num++;
-     }
-   
-   range = (unsigned char *)SLmalloc (num + 1);
-   if (range == NULL)
-     return NULL;
-   
-   s1 = s;
-   s = range;
-   while ((ch = *s1++) != 0)
-     {
-	unsigned char ch1;
-	unsigned int i;
-
-	ch1 = *s1;
-	if (ch1 != '-')
-	  {
-	     *s++ = ch;
-	     continue;
-	  }
-
-	s1++;
-	ch1 = *s1;
-	
-	if (ch > ch1)
-	  {
-	     if (ch1 == 0)
-	       ch1 = 1;
-
-	     for (i = (unsigned int) ch; i >= (unsigned int) ch1; i--)
-	       *s++ = (unsigned char) i;
-	     
-	     if (*s1 == 0)
-	       break;
-	  }
-	else
-	  {
-	     for (i = (unsigned int) ch; i <= (unsigned int) ch1; i++)
-	       *s++ = (unsigned char) i;
-	  }
-	s1++;
-     }
-   
-#if 0
-   if (range + num != s)
-     SLang_verror (SL_INTERNAL_ERROR, "make_str_range: num wrong");
-#endif
-   *s = 0;
-
-   return range;
-}
-
-static void strtrans_cmd (char *s, unsigned char *from, unsigned char *to)
-{
-   unsigned char map[256];
-   char *s1;
-   unsigned int i;
-   unsigned char ch;
-   unsigned char last_to;
-   unsigned char *from_range, *to_range;
-
-   for (i = 0; i < 256; i++) map[i] = (unsigned char) i;
-
-   if (*to == 0)
-     {
-	str_delete_chars_cmd (s, (char *)from);
-	return;
-     }
-
-   from_range = make_str_range (from);
-   if (from_range == NULL)
-     return;
-   to_range = make_str_range (to);
-   if (to_range == NULL)
-     {
-	SLfree ((char *)from_range);
-	return;
-     }
-
-   from = from_range;
-   to = to_range;
-
-   last_to = 0;
-   while ((ch = *from++) != 0)
-     {
-	unsigned char to_ch;
-
-	if (0 == (to_ch = *to++))
-	  {
-	     do
-	       {
-		  map[ch] = last_to;
-	       }
-	     while (0 != (ch = *from++));
-	     break;
-	  }
-	
-	last_to = map[ch] = to_ch;
-     }
-
-   SLfree ((char *)from_range);
-   SLfree ((char *)to_range);
-
-   s = SLmake_string (s);
-   if (s == NULL)
-     return;
-
-   s1 = s;
-   while ((ch = (unsigned char) *s1) != 0)
-     *s1++ = (char) map[ch];
-   
-   (void) SLang_push_malloced_string (s);
-}
-
-
-static SLang_Intrin_Fun_Type Strops_Table [] = /*{{{*/
-{
-   MAKE_INTRINSIC_I("create_delimited_string",  create_delimited_string_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SS("strcmp",  strcmp_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SSI("strncmp",  strncmp_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("strcat",  strcat_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strlen",  strlen_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SII("strchop", strchop_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SII("strchopr", strchopr_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_I("strreplace", strreplace_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SSS("str_replace", str_replace_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SII("substr",  substr_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SS("is_substr",  issubstr_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_II("strsub",  strsub_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SII("extract_element", extract_element_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SSI("is_list_element", is_list_element_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_SSI("string_match", string_match_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("string_match_nth", string_match_nth_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("strlow", strlow_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_I("tolower", tolower_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_I("toupper", toupper_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_0("strup", strup_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("isdigit",  isdigit_cmd, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("strtrim", strtrim_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strtrim_end", strtrim_end_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strtrim_beg", strtrim_beg_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("strcompress", strcompress_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_I("Sprintf", sprintf_n_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("sprintf", sprintf_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("sscanf", _SLang_sscanf, SLANG_INT_TYPE),
-   MAKE_INTRINSIC_S("make_printable_string", make_printable_string, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SSI("str_quote_string", str_quote_string_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SSS("str_uncomment_string", str_uncomment_string_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_II("define_case", SLang_define_case, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strtok", strtok_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_S("strjoin", strjoin_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SSS("strtrans", strtrans_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_SS("str_delete_chars", str_delete_chars_cmd, SLANG_VOID_TYPE),
-
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-/*}}}*/
-
-int _SLang_init_slstrops (void)
-{
-   return SLadd_intrin_fun_table (Strops_Table, NULL);
-}
diff --git a/mdk-stage1/slang/slstruct.c b/mdk-stage1/slang/slstruct.c
deleted file mode 100644
index 33d182373..000000000
--- a/mdk-stage1/slang/slstruct.c
+++ /dev/null
@@ -1,932 +0,0 @@
-/* Structure type implementation */
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#define SL_APP_WANTS_FOREACH
-#include "slang.h"
-#include "_slang.h"
-
-void _SLstruct_delete_struct (_SLang_Struct_Type *s)
-{
-   _SLstruct_Field_Type *field, *field_max;
-
-   if (s == NULL) return;
-
-   if (s->num_refs > 1)
-     {
-	s->num_refs -= 1;
-	return;
-     }
-
-   field = s->fields;
-   if (field != NULL)
-     {
-	field_max = field + s->nfields;
-
-	while (field < field_max)
-	  {
-	     SLang_free_object (&field->obj);
-	     SLang_free_slstring (field->name);   /* could be NULL */
-	     field++;
-	  }
-	SLfree ((char *) s->fields);
-     }
-   SLfree ((char *) s);
-}
-
-static _SLang_Struct_Type *allocate_struct (unsigned int nfields)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   unsigned int i, size;
-
-   s = (_SLang_Struct_Type *) SLmalloc (sizeof (_SLang_Struct_Type));
-   if (s == NULL) return NULL;
-
-   SLMEMSET((char *) s, 0, sizeof (_SLang_Struct_Type));
-
-   size = nfields * sizeof(_SLstruct_Field_Type);
-   if (NULL == (f = (_SLstruct_Field_Type *) SLmalloc (size)))
-     {
-	SLfree ((char *) s);
-	return NULL;
-     }
-   SLMEMSET ((char *) f, 0, size);
-   s->nfields = nfields;
-   s->fields = f;
-
-   /* By default, all structs will be created with elements set to NULL.  I
-    * do not know whether or not it is better to use SLANG_UNDEFINED_TYPE.
-    */
-   for (i = 0; i < nfields; i++)
-     f[i].obj.data_type = SLANG_NULL_TYPE;
-
-   return s;
-}
-
-static int push_struct_of_type (unsigned char type, _SLang_Struct_Type *s)
-{
-   SLang_Object_Type obj;
-
-   obj.data_type = type;
-   obj.v.struct_val = s;
-   s->num_refs += 1;
-
-   if (0 == SLang_push (&obj))
-     return 0;
-
-   s->num_refs -= 1;
-   return -1;
-}
-
-int _SLang_push_struct (_SLang_Struct_Type *s)
-{
-   return push_struct_of_type (SLANG_STRUCT_TYPE, s);
-}
-
-int _SLang_pop_struct (_SLang_Struct_Type **sp)
-{
-   SLang_Object_Type obj;
-   SLang_Class_Type *cl;
-   unsigned char type;
-
-   if (0 != SLang_pop (&obj))
-     return -1;
-
-   type = obj.data_type;
-   if (type != SLANG_STRUCT_TYPE)
-     {
-	cl = _SLclass_get_class (type);
-	if (cl->cl_struct_def == NULL)
-	  {
-	     *sp = NULL;
-	     SLang_free_object (&obj);
-	     SLang_verror (SL_TYPE_MISMATCH,
-			   "Expecting struct type object.  Found %s",
-			   cl->cl_name);
-	     return -1;
-	  }
-     }
-
-   *sp = obj.v.struct_val;
-   return 0;
-}
-
-static void struct_destroy (unsigned char type, VOID_STAR vs)
-{
-   (void) type;
-   _SLstruct_delete_struct (*(_SLang_Struct_Type **) vs);
-}
-
-static int struct_push (unsigned char type, VOID_STAR ptr)
-{
-   return push_struct_of_type (type, *(_SLang_Struct_Type **) ptr);
-}
-
-static _SLstruct_Field_Type *find_field (_SLang_Struct_Type *s, char *name)
-{
-   _SLstruct_Field_Type *f, *fmax;
-
-   f = s->fields;
-   fmax = f + s->nfields;
-
-   while (f < fmax)
-     {
-	/* Since both these are slstrings, only compare pointer */
-	if (name == f->name)
-	  return f;
-
-	f++;
-     }
-
-   return NULL;
-}
-
-static _SLstruct_Field_Type *pop_field (_SLang_Struct_Type *s, char *name)
-{
-   _SLstruct_Field_Type *f;
-
-   f = find_field (s, name);
-   if (f == NULL)
-     SLang_verror (SL_SYNTAX_ERROR, "struct has no field named %s", name);
-   return f;
-}
-
-int SLstruct_create_struct (unsigned int nfields,
-			    char **field_names,
-			    unsigned char *field_types,
-			    VOID_STAR *field_values)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   unsigned int i;
-
-   if (NULL == (s = allocate_struct (nfields)))
-     return -1;
-
-   f = s->fields;
-   for (i = 0; i < nfields; i++)
-     {
-	unsigned char type;
-	SLang_Class_Type *cl;
-	VOID_STAR value;
-	char *name = field_names [i];
-
-	if (name == NULL)
-	  {
-	     SLang_verror (SL_INVALID_PARM, "A struct field name cannot be NULL");
-	     goto return_error;
-	  }
-
-	if (NULL == (f->name = SLang_create_slstring (name)))
-	  goto return_error;
-
-	if ((field_values == NULL)
-	    || (NULL == (value = field_values [i])))
-	  {
-	     f++;
-	     continue;
-	  }
-
-	type = field_types[i];
-	cl = _SLclass_get_class (type);
-
-	if ((-1 == (cl->cl_push (type, value)))
-	    || (-1 == SLang_pop (&f->obj)))
-	  goto return_error;
-
-	f++;
-     }
-
-   if (0 == _SLang_push_struct (s))
-     return 0;
-   /* drop */
-
-   return_error:
-   _SLstruct_delete_struct (s);
-   return -1;
-}
-
-/* Interpreter interface */
-
-int _SLstruct_define_struct (void)
-{
-   int nfields;
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-
-   if (-1 == SLang_pop_integer (&nfields))
-     return -1;
-
-   if (nfields <= 0)
-     {
-	SLang_verror (SL_INVALID_PARM, "Number of struct fields must be > 0");
-	return -1;
-     }
-
-   if (NULL == (s = allocate_struct (nfields)))
-     return -1;
-
-   f = s->fields;
-   while (nfields)
-     {
-	char *name;
-
-	nfields--;
-	if (-1 == SLang_pop_slstring (&name))
-	  {
-	     _SLstruct_delete_struct (s);
-	     return -1;
-	  }
-	f[nfields].name = name;
-     }
-
-   if (-1 == _SLang_push_struct (s))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-   return 0;
-}
-
-/* Simply make a struct that contains the same fields as struct s.  Do not
- * duplicate the field values.
- */
-static _SLang_Struct_Type *make_struct_shell (_SLang_Struct_Type *s)
-{
-   _SLang_Struct_Type *new_s;
-   _SLstruct_Field_Type *new_f, *old_f;
-   unsigned int i, nfields;
-
-   nfields = s->nfields;
-   if (NULL == (new_s = allocate_struct (nfields)))
-     return NULL;
-
-   new_f = new_s->fields;
-   old_f = s->fields;
-
-   for (i = 0; i < nfields; i++)
-     {
-	if (NULL == (new_f[i].name = SLang_create_slstring (old_f[i].name)))
-	  {
-	     _SLstruct_delete_struct (new_s);
-	     return NULL;
-	  }
-     }
-   return new_s;
-}
-
-static int struct_init_array_object (unsigned char type, VOID_STAR addr)
-{
-   SLang_Class_Type *cl;
-   _SLang_Struct_Type *s;
-
-   cl = _SLclass_get_class (type);
-   if (NULL == (s = make_struct_shell (cl->cl_struct_def)))
-     return -1;
-
-   s->num_refs = 1;
-   *(_SLang_Struct_Type **) addr = s;
-   return 0;
-}
-
-static int
-typedefed_struct_datatype_deref (unsigned char type)
-{
-   SLang_Class_Type *cl;
-   _SLang_Struct_Type *s;
-
-   cl = _SLclass_get_class (type);
-   if (NULL == (s = make_struct_shell (cl->cl_struct_def)))
-     return -1;
-
-   if (-1 == push_struct_of_type (type, s))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   return 0;
-}
-
-static _SLang_Struct_Type *duplicate_struct (_SLang_Struct_Type *s)
-{
-   _SLang_Struct_Type *new_s;
-   _SLstruct_Field_Type *new_f, *f, *fmax;
-
-   new_s = make_struct_shell (s);
-
-   if (new_s == NULL)
-     return NULL;
-
-   f = s->fields;
-   fmax = f + s->nfields;
-   new_f = new_s->fields;
-
-   while (f < fmax)
-     {
-	SLang_Object_Type *obj;
-
-	obj = &f->obj;
-	if (obj->data_type != SLANG_UNDEFINED_TYPE)
-	  {
-	     if ((-1 == _SLpush_slang_obj (obj))
-		 || (-1 == SLang_pop (&new_f->obj)))
-	       {
-		  _SLstruct_delete_struct (new_s);
-		  return NULL;
-	       }
-	  }
-	new_f++;
-	f++;
-     }
-
-   return new_s;
-}
-
-static int struct_dereference (unsigned char type, VOID_STAR addr)
-{
-   _SLang_Struct_Type *s;
-
-   if (NULL == (s = duplicate_struct (*(_SLang_Struct_Type **) addr)))
-     return -1;
-
-   if (-1 == push_struct_of_type (type, s))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   return 0;
-}
-
-/*{{{ foreach */
-
-struct _SLang_Foreach_Context_Type
-{
-   _SLang_Struct_Type *s;
-   char *next_field_name;
-};
-
-static SLang_Foreach_Context_Type *
-struct_foreach_open (unsigned char type, unsigned int num)
-{
-   SLang_Foreach_Context_Type *c;
-   _SLang_Struct_Type *s;
-   char *next_name;
-
-   (void) type;
-
-   if (-1 == _SLang_pop_struct (&s))
-     return NULL;
-
-   switch (num)
-     {
-      case 0:
-	next_name = SLang_create_slstring ("next");
-	break;
-
-      case 1:
-	if (-1 == SLang_pop_slstring (&next_name))
-	  next_name = NULL;
-	break;
-
-      default:
-	next_name = NULL;
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "'foreach (Struct_Type) using' requires single control value");
-	SLdo_pop_n (num);
-	break;
-     }
-
-   if (next_name == NULL)
-     {
-	_SLstruct_delete_struct (s);
-	return NULL;
-     }
-
-   c = (SLang_Foreach_Context_Type *)SLmalloc (sizeof (SLang_Foreach_Context_Type));
-   if (c == NULL)
-     {
-	_SLstruct_delete_struct (s);
-	SLang_free_slstring (next_name);
-	return NULL;
-     }
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-
-   c->next_field_name = next_name;
-   c->s = s;
-
-   return c;
-}
-
-static void struct_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-
-   SLang_free_slstring (c->next_field_name);
-   if (c->s != NULL) _SLstruct_delete_struct (c->s);
-   SLfree ((char *) c);
-}
-
-static int struct_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   _SLstruct_Field_Type *f;
-   _SLang_Struct_Type *next_s;
-
-   (void) type;
-
-   if (c == NULL)
-     return -1;
-
-   if (c->s == NULL)
-     return 0;			       /* done */
-
-   if (-1 == _SLang_push_struct (c->s))
-     return -1;
-
-   /* Now get the next one ready for the next foreach loop */
-
-   next_s = NULL;
-   if (NULL != (f = find_field (c->s, c->next_field_name)))
-     {
-	SLang_Class_Type *cl;
-
-	cl = _SLclass_get_class (f->obj.data_type);
-	/* Note that I cannot simply look for SLANG_STRUCT_TYPE since the
-	 * user may have typedefed another struct type.  So, look at the
-	 * class methods.
-	 */
-	if (cl->cl_foreach_open == struct_foreach_open)
-	  {
-	     next_s = f->obj.v.struct_val;
-	     next_s->num_refs += 1;
-	  }
-     }
-
-   _SLstruct_delete_struct (c->s);
-   c->s = next_s;
-
-   /* keep going */
-   return 1;
-}
-
-/*}}}*/
-
-static int struct_sput (unsigned char type, char *name)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   SLang_Object_Type obj;
-
-   (void) type;
-
-   if (-1 == _SLang_pop_struct (&s))
-     return -1;
-
-   if ((NULL == (f = pop_field (s, name)))
-       || (-1 == SLang_pop (&obj)))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   SLang_free_object (&f->obj);
-   f->obj = obj;
-   _SLstruct_delete_struct (s);
-   return 0;
-}
-
-static int struct_sget (unsigned char type, char *name)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   int ret;
-
-   (void) type;
-
-   if (-1 == _SLang_pop_struct (&s))
-     return -1;
-
-   if (NULL == (f = pop_field (s, name)))
-     {
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   ret = _SLpush_slang_obj (&f->obj);
-   _SLstruct_delete_struct (s);
-   return ret;
-}
-
-static int struct_typecast
-  (unsigned char a_type, VOID_STAR ap, unsigned int na,
-   unsigned char b_type, VOID_STAR bp)
-{
-   _SLang_Struct_Type **a, **b;
-   unsigned int i;
-   
-   (void) a_type;
-   (void) b_type;
-
-   a = (_SLang_Struct_Type **) ap;
-   b = (_SLang_Struct_Type **) bp;
-   for (i = 0; i < na; i++)
-     {
-	b[i] = a[i];
-	if (a[i] != NULL)
-	  a[i]->num_refs += 1;
-     }
-
-   return 1;
-}
-
-int _SLstruct_define_typedef (void)
-{
-   char *type_name;
-   _SLang_Struct_Type *s, *s1;
-   SLang_Class_Type *cl;
-
-   if (-1 == SLang_pop_slstring (&type_name))
-     return -1;
-
-   if (-1 == _SLang_pop_struct (&s))
-     {
-	SLang_free_slstring (type_name);
-	return -1;
-     }
-
-   if (NULL == (s1 = make_struct_shell (s)))
-     {
-	SLang_free_slstring (type_name);
-	_SLstruct_delete_struct (s);
-	return -1;
-     }
-
-   _SLstruct_delete_struct (s);
-
-   if (NULL == (cl = SLclass_allocate_class (type_name)))
-     {
-	SLang_free_slstring (type_name);
-	_SLstruct_delete_struct (s1);
-	return -1;
-     }
-   SLang_free_slstring (type_name);
-
-   cl->cl_struct_def = s1;
-   cl->cl_init_array_object = struct_init_array_object;
-   cl->cl_datatype_deref = typedefed_struct_datatype_deref;
-   cl->cl_destroy = struct_destroy;
-   cl->cl_push = struct_push;
-   cl->cl_dereference = struct_dereference;
-   cl->cl_foreach_open = struct_foreach_open;
-   cl->cl_foreach_close = struct_foreach_close;
-   cl->cl_foreach = struct_foreach;
-
-   cl->cl_sget = struct_sget;
-   cl->cl_sput = struct_sput;
-
-   if (-1 == SLclass_register_class (cl,
-				     SLANG_VOID_TYPE,   /* any open slot */
-				     sizeof (_SLang_Struct_Type),
-				     SLANG_CLASS_TYPE_PTR))
-     {
-	/* FIXME: Priority=low */
-	/* There is a memory leak here if this fails... */
-	return -1;
-     }
-   /* Note: typecast from a user type struct type allowed but not the other
-    * way.
-    */
-   if (-1 == SLclass_add_typecast (cl->cl_data_type, SLANG_STRUCT_TYPE, struct_typecast, 1))
-     return -1;
-
-   return 0;
-}
-
-static int
-struct_datatype_deref (unsigned char stype)
-{
-   (void) stype;
-   
-   if (SLang_peek_at_stack () == SLANG_ARRAY_TYPE)
-     {
-	SLang_Array_Type *at;
-	int status;
-
-	if (-1 == SLang_pop_array_of_type (&at, SLANG_STRING_TYPE))
-	  return -1;
-	
-	status = SLstruct_create_struct (at->num_elements,
-					 (char **) at->data, NULL, NULL);
-
-	SLang_free_array (at);
-	return status;
-     }
-
-   SLang_push_integer (SLang_Num_Function_Args);
-   return _SLstruct_define_struct ();
-}
-
-static int register_struct (void)
-{
-   SLang_Class_Type *cl;
-
-   if (NULL == (cl = SLclass_allocate_class ("Struct_Type")))
-     return -1;
-
-   (void) SLclass_set_destroy_function (cl, struct_destroy);
-   (void) SLclass_set_push_function (cl, struct_push);
-   cl->cl_dereference = struct_dereference;
-   cl->cl_datatype_deref = struct_datatype_deref;
-
-   cl->cl_foreach_open = struct_foreach_open;
-   cl->cl_foreach_close = struct_foreach_close;
-   cl->cl_foreach = struct_foreach;
-
-   cl->cl_sget = struct_sget;
-   cl->cl_sput = struct_sput;
-
-   if (-1 == SLclass_register_class (cl, SLANG_STRUCT_TYPE, sizeof (_SLang_Struct_Type),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   return 0;
-}
-
-static void get_struct_field_names (_SLang_Struct_Type *s)
-{
-   SLang_Array_Type *a;
-   char **data;
-   int i, nfields;
-   _SLstruct_Field_Type *f;
-
-   nfields = (int) s->nfields;
-
-   if (NULL == (a = SLang_create_array (SLANG_STRING_TYPE, 0, NULL, &nfields, 1)))
-     return;
-
-   f = s->fields;
-   data = (char **) a->data;
-   for (i = 0; i < nfields; i++)
-     {
-	/* Since we are dealing with hashed strings, the next call should not
-	 * fail.  If it does, the interpreter will handle it at some other
-	 * level.
-	 */
-	data [i] = SLang_create_slstring (f[i].name);
-     }
-
-   SLang_push_array (a, 1);
-}
-
-static int push_struct_fields (_SLang_Struct_Type *s)
-{
-   _SLstruct_Field_Type *f, *fmax;
-   int num;
-
-   f = s->fields;
-   fmax = f + s->nfields;
-
-   num = 0;
-   while (fmax > f)
-     {
-	fmax--;
-	if (-1 == _SLpush_slang_obj (&fmax->obj))
-	  break;
-
-	num++;
-     }
-
-   return num;
-}
-
-/* Syntax: set_struct_field (s, name, value); */
-static void struct_set_field (void)
-{
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-   SLang_Object_Type obj;
-   char *name;
-
-   if (-1 == SLang_pop (&obj))
-     return;
-
-   if (-1 == SLang_pop_slstring (&name))
-     {
-	SLang_free_object (&obj);
-	return;
-     }
-
-   if (-1 == _SLang_pop_struct (&s))
-     {
-	SLang_free_slstring (name);
-	SLang_free_object (&obj);
-	return;
-     }
-
-   if (NULL == (f = pop_field (s, name)))
-     {
-	_SLstruct_delete_struct (s);
-	SLang_free_slstring (name);
-	SLang_free_object (&obj);
-	return;
-     }
-
-   SLang_free_object (&f->obj);
-   f->obj = obj;
-
-   _SLstruct_delete_struct (s);
-   SLang_free_slstring (name);
-}
-
-/* Syntax: set_struct_fields (s, values....); */
-static void set_struct_fields (void)
-{
-   unsigned int n;
-   _SLang_Struct_Type *s;
-   _SLstruct_Field_Type *f;
-
-   n = (unsigned int) SLang_Num_Function_Args;
-
-   if (-1 == SLreverse_stack (n))
-     return;
-
-   n--;
-   if (-1 == _SLang_pop_struct (&s))
-     {
-	SLdo_pop_n (n);
-	return;
-     }
-
-   if (n > s->nfields)
-     {
-	SLdo_pop_n (n);
-	SLang_verror (SL_INVALID_PARM, "Too many values for structure");
-	_SLstruct_delete_struct (s);
-	return;
-     }
-
-   f = s->fields;
-   while (n > 0)
-     {
-	SLang_Object_Type obj;
-
-	if (-1 == SLang_pop (&obj))
-	  break;
-
-	SLang_free_object (&f->obj);
-	f->obj = obj;
-
-	f++;
-	n--;
-     }
-
-   _SLstruct_delete_struct (s);
-}
-
-static void get_struct_field (char *name)
-{
-   (void) struct_sget (0, name);
-}
-
-static int is_struct_type (void)
-{
-   SLang_Object_Type obj;
-   unsigned char type;
-   int status;
-
-   if (-1 == SLang_pop (&obj))
-     return -1;
-   
-   type = obj.data_type;
-   if (type == SLANG_STRUCT_TYPE)
-     status = 1;
-   else
-     status = (NULL != _SLclass_get_class (type)->cl_struct_def);
-   SLang_free_object (&obj);
-   return status;
-}	
-   
-     
-static SLang_Intrin_Fun_Type Struct_Table [] =
-{
-   MAKE_INTRINSIC_1("get_struct_field_names", get_struct_field_names, SLANG_VOID_TYPE, SLANG_STRUCT_TYPE),
-   MAKE_INTRINSIC_1("get_struct_field", get_struct_field, SLANG_VOID_TYPE, SLANG_STRING_TYPE),
-   MAKE_INTRINSIC_1("_push_struct_field_values", push_struct_fields, SLANG_INT_TYPE, SLANG_STRUCT_TYPE),
-   MAKE_INTRINSIC_0("set_struct_field", struct_set_field, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("set_struct_fields", set_struct_fields, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("is_struct_type", is_struct_type, SLANG_INT_TYPE),
-   /* MAKE_INTRINSIC_I("_create_struct", create_struct, SLANG_VOID_TYPE), */
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLstruct_init (void)
-{
-   if ((-1 == SLadd_intrin_fun_table (Struct_Table, NULL))
-       || (-1 == register_struct ()))
-     return -1;
-
-   return 0;
-}
-
-void _SLstruct_pop_args (int *np)
-{
-   SLang_Array_Type *at;
-   int i, n;
-   _SLang_Struct_Type **data;
-
-   n = *np;
-
-   if (n < 0)
-     {
-	SLang_Error = SL_INVALID_PARM;
-	return;
-     }
-
-   data = (_SLang_Struct_Type **) SLmalloc ((n + 1) * sizeof (_SLang_Struct_Type *));
-   if (data == NULL)
-     {
-	SLdo_pop_n (n);
-	return;
-     }
-
-   memset ((char *)data, 0, n * sizeof (_SLang_Struct_Type *));
-
-   i = n;
-   while (i > 0)
-     {
-	_SLang_Struct_Type *s;
-	_SLstruct_Field_Type *f;
-
-	i--;
-
-	if (NULL == (s = allocate_struct (1)))
-	  goto return_error;
-
-	data[i] = s;
-	s->num_refs += 1;	       /* keeping a copy */
-
-	f = s->fields;
-	if (NULL == (f->name = SLang_create_slstring ("value")))
-	  goto return_error;
-
-	if (-1 == SLang_pop (&f->obj))
-	  goto return_error;
-     }
-
-   if (NULL == (at = SLang_create_array (SLANG_STRUCT_TYPE, 0,
-					 (VOID_STAR) data, &n, 1)))
-     goto return_error;
-
-   (void) SLang_push_array (at, 1);
-   return;
-
-   return_error:
-   for (i = 0; i < n; i++)
-     {
-	_SLang_Struct_Type *s;
-
-	s = data[i];
-	if (s != NULL)
-	  _SLstruct_delete_struct (s);
-     }
-
-   SLfree ((char *) data);
-}
-
-void _SLstruct_push_args (SLang_Array_Type *at)
-{
-   _SLang_Struct_Type **sp;
-   unsigned int num;
-
-   if (at->data_type != SLANG_STRUCT_TYPE)
-     {
-	SLang_Error = SL_TYPE_MISMATCH;
-	return;
-     }
-
-   sp = (_SLang_Struct_Type **) at->data;
-   num = at->num_elements;
-
-   while ((SLang_Error == 0) && (num > 0))
-     {
-	_SLang_Struct_Type *s;
-
-	num--;
-	if (NULL == (s = *sp++))
-	  {
-	     SLang_push_null ();
-	     continue;
-	  }
-
-	/* I should check to see if the value field is present, but... */
-	(void) _SLpush_slang_obj (&s->fields->obj);
-     }
-}
diff --git a/mdk-stage1/slang/sltermin.c b/mdk-stage1/slang/sltermin.c
deleted file mode 100644
index f9c64f0b2..000000000
--- a/mdk-stage1/slang/sltermin.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/* This file contains enough terminfo reading capabilities sufficient for
- * the slang SLtt interface.
- */
-
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-/*
- * The majority of the comments found in the file were taken from the
- * term(4) man page on an SGI.
- */
-
-/* Short integers are stored in two 8-bit bytes.  The first byte contains
- * the least significant 8 bits of the value, and the second byte contains
- * the most significant 8 bits.  (Thus, the value represented is
- * 256*second+first.)  The value -1 is represented by 0377,0377, and the
- * value -2 is represented by 0376,0377; other negative values are illegal.
- * The -1 generally means that a capability is missing from this terminal.
- * The -2 means that the capability has been cancelled in the terminfo
- * source and also is to be considered missing.
- */
-
-static int make_integer (unsigned char *buf)
-{
-   register int lo, hi;
-   lo = (int) *buf++; hi = (int) *buf;
-   if (hi == 0377)
-     {
-	if (lo == 0377) return -1;
-	if (lo == 0376) return -2;
-     }
-   return lo + 256 * hi;
-}
-
-/*
- * The compiled file is created from the source file descriptions of the
- * terminals (see the -I option of infocmp) by using the terminfo compiler,
- * tic, and read by the routine setupterm [see curses(3X).]  The file is
- * divided into six parts in the following order:  the header, terminal
- * names, boolean flags, numbers, strings, and string table.
- *
- * The header section begins the file.  This section contains six short
- * integers in the format described below.  These integers are (1) the magic
- * number (octal 0432); (2) the size, in bytes, of the names section; (3)
- * the number of bytes in the boolean section; (4) the number of short
- * integers in the numbers section; (5) the number of offsets (short
- * integers) in the strings section; (6) the size, in bytes, of the string
- * table.
- */
-
-#define MAGIC 0432
-
-/* In this structure, all char * fields are malloced EXCEPT if the
- * structure is SLTERMCAP.  In that case, only terminal_names is malloced
- * and the other fields are pointers into it.
- */
-struct _SLterminfo_Type
-{
-#define SLTERMINFO 1
-#define SLTERMCAP  2
-   unsigned int flags;
-
-   unsigned int name_section_size;
-   char *terminal_names;
-
-   unsigned int boolean_section_size;
-   unsigned char *boolean_flags;
-
-   unsigned int num_numbers;
-   unsigned char *numbers;
-
-   unsigned int num_string_offsets;
-   unsigned char *string_offsets;
-
-   unsigned int string_table_size;
-   char *string_table;
-
-};
-
-static char *tcap_getstr (char *, SLterminfo_Type *);
-static int tcap_getnum (char *, SLterminfo_Type *);
-static int tcap_getflag (char *, SLterminfo_Type *);
-static int tcap_getent (char *, SLterminfo_Type *);
-
-static FILE *open_terminfo (char *file, SLterminfo_Type *h)
-{
-   FILE *fp;
-   unsigned char buf[12];
-
-   /* Alan Cox reported a security problem here if the application using the
-    * library is setuid.  So, I need to make sure open the file as a normal
-    * user.  Unfortunately, there does not appear to be a portable way of
-    * doing this, so I am going to use 'setfsgid' and 'setfsuid', which
-    * are not portable.
-    *
-    * I will also look into the use of setreuid, seteuid and setregid, setegid.
-    * FIXME: Priority=medium
-    */
-   fp = fopen (file, "rb");
-   if (fp == NULL) return NULL;
-
-   if ((12 == fread ((char *) buf, 1, 12, fp) && (MAGIC == make_integer (buf))))
-     {
-	h->name_section_size = make_integer (buf + 2);
-	h->boolean_section_size = make_integer (buf + 4);
-	h->num_numbers = make_integer (buf + 6);
-	h->num_string_offsets = make_integer (buf + 8);
-	h->string_table_size = make_integer (buf + 10);
-     }
-   else
-     {
-	fclose (fp);
-	fp = NULL;
-     }
-   return fp;
-}
-
-/*
- * The terminal names section comes next.  It contains the first line of the
- * terminfo description, listing the various names for the terminal,
- * separated by the bar ( | ) character (see term(5)).  The section is
- * terminated with an ASCII NUL character.
- */
-
-/* returns pointer to malloced space */
-static unsigned char *read_terminfo_section (FILE *fp, unsigned int size)
-{
-   char *s;
-
-   if (NULL == (s = (char *) SLmalloc (size))) return NULL;
-   if (size != fread (s, 1, size, fp))
-     {
-	SLfree (s);
-	return NULL;
-     }
-   return (unsigned char *) s;
-}
-
-static char *read_terminal_names (FILE *fp, SLterminfo_Type *t)
-{
-   return t->terminal_names = (char *) read_terminfo_section (fp, t->name_section_size);
-}
-
-/*
- * The boolean flags have one byte for each flag.  This byte is either 0 or
- * 1 as the flag is present or absent.  The value of 2 means that the flag
- * has been cancelled.  The capabilities are in the same order as the file
- * <term.h>.
- */
-
-static unsigned char *read_boolean_flags (FILE *fp, SLterminfo_Type *t)
-{
-   /* Between the boolean section and the number section, a null byte is
-    * inserted, if necessary, to ensure that the number section begins on an
-    * even byte offset. All short integers are aligned on a short word
-    * boundary.
-    */
-
-   unsigned int size = (t->name_section_size + t->boolean_section_size) % 2;
-   size += t->boolean_section_size;
-
-   return t->boolean_flags = read_terminfo_section (fp, size);
-}
-
-/*
- * The numbers section is similar to the boolean flags section.  Each
- * capability takes up two bytes, and is stored as a short integer.  If the
- * value represented is -1 or -2, the capability is taken to be missing.
- */
-
-static unsigned char *read_numbers (FILE *fp, SLterminfo_Type *t)
-{
-   return t->numbers = read_terminfo_section (fp, 2 * t->num_numbers);
-}
-
-/* The strings section is also similar.  Each capability is stored as a
- * short integer, in the format above.  A value of -1 or -2 means the
- * capability is missing.  Otherwise, the value is taken as an offset from
- * the beginning of the string table.  Special characters in ^X or \c
- * notation are stored in their interpreted form, not the printing
- * representation.  Padding information ($<nn>) and parameter information
- * (%x) are stored intact in uninterpreted form.
- */
-
-static unsigned char *read_string_offsets (FILE *fp, SLterminfo_Type *t)
-{
-   return t->string_offsets = (unsigned char *) read_terminfo_section (fp, 2 * t->num_string_offsets);
-}
-
-/* The final section is the string table.  It contains all the values of
- * string capabilities referenced in the string section.  Each string is
- * null terminated.
- */
-
-static char *read_string_table (FILE *fp, SLterminfo_Type *t)
-{
-   return t->string_table = (char *) read_terminfo_section (fp, t->string_table_size);
-}
-
-/*
- * Compiled terminfo(4) descriptions are placed under the directory
- * /usr/share/lib/terminfo.  In order to avoid a linear search of a huge
- * UNIX system directory, a two-level scheme is used:
- * /usr/share/lib/terminfo/c/name where name is the name of the terminal,
- * and c is the first character of name.  Thus, att4425 can be found in the
- * file /usr/share/lib/terminfo/a/att4425.  Synonyms for the same terminal
- * are implemented by multiple links to the same compiled file.
- */
-
-#define MAX_TI_DIRS 7
-static char *Terminfo_Dirs [MAX_TI_DIRS] =
-{
-   NULL, /* $HOME/.terminfo */
-   NULL, /* $TERMINFO */
-   "/usr/share/terminfo",
-   "/usr/lib/terminfo",
-   "/usr/share/lib/terminfo",
-   "/etc/terminfo",
-   "/usr/local/lib/terminfo"
-};
-
-SLterminfo_Type *_SLtt_tigetent (char *term)
-{
-   char *tidir;
-   int i;
-   FILE *fp = NULL;
-   char file[1024];
-   static char home_ti [1024];
-   char *home;
-   SLterminfo_Type *ti;
-
-   if (
-       (term == NULL)
-#ifdef SLANG_UNTIC
-       && (SLang_Untic_Terminfo_File == NULL)
-#endif
-       )
-     return NULL;
-
-   if (NULL == (ti = (SLterminfo_Type *) SLmalloc (sizeof (SLterminfo_Type))))
-     {
-	return NULL;
-     }
-
-#ifdef SLANG_UNTIC
-   if (SLang_Untic_Terminfo_File != NULL)
-     {
-	fp = open_terminfo (SLang_Untic_Terminfo_File, ti);
-	goto fp_open_label;
-     }
-   else
-#endif
-   /* If we are on a termcap based system, use termcap */
-   if (0 == tcap_getent (term, ti)) return ti;
-
-   if (NULL != (home = getenv ("HOME")))
-     {
-	strncpy (home_ti, home, sizeof (home_ti) - 11);
-	home_ti [sizeof(home_ti) - 11] = 0;
-	strcat (home_ti, "/.terminfo");
-	Terminfo_Dirs [0] = home_ti;
-     }
-
-   Terminfo_Dirs[1] = getenv ("TERMINFO");
-   i = 0;
-   while (i < MAX_TI_DIRS)
-     {
-	tidir = Terminfo_Dirs[i];
-	if ((tidir != NULL)
-	    && (sizeof (file) > strlen (tidir) + 2 + strlen (term)))
-	  {
-	     sprintf (file, "%s/%c/%s", tidir, *term, term);
-	     if (NULL != (fp = open_terminfo (file, ti)))
-	       break;
-	  }
-	i++;
-     }
-#ifdef SLANG_UNTIC
-   fp_open_label:
-#endif
-
-   if (fp != NULL)
-     {
-	if (NULL != read_terminal_names (fp, ti))
-	  {
-	     if (NULL != read_boolean_flags (fp, ti))
-	       {
-		  if (NULL != read_numbers (fp, ti))
-		    {
-		       if (NULL != read_string_offsets (fp, ti))
-			 {
-			    if (NULL != read_string_table (fp, ti))
-			      {
-				 /* success */
-				 fclose (fp);
-				 ti->flags = SLTERMINFO;
-				 return ti;
-			      }
-			    SLfree ((char *)ti->string_offsets);
-			 }
-		       SLfree ((char *)ti->numbers);
-		    }
-		  SLfree ((char *)ti->boolean_flags);
-	       }
-	     SLfree ((char *)ti->terminal_names);
-	  }
-	fclose (fp);
-     }
-
-   SLfree ((char *)ti);
-   return NULL;
-}
-
-#ifdef SLANG_UNTIC
-# define UNTIC_COMMENT(x) ,x
-#else
-# define UNTIC_COMMENT(x)
-#endif
-
-typedef struct
-{
-   char name[3];
-   int offset;
-#ifdef SLANG_UNTIC
-   char *comment;
-#endif
-}
-Tgetstr_Map_Type;
-
-/* I need to add: K1-5, %0-5(not important), @8, &8... */
-static Tgetstr_Map_Type Tgetstr_Map [] =
-{
-   {"!1", 212		UNTIC_COMMENT("shifted key")},
-   {"!2", 213		UNTIC_COMMENT("shifted key")},
-   {"!3", 214		UNTIC_COMMENT("shifted key")},
-   {"#1", 198		UNTIC_COMMENT("shifted key")},
-   {"#2", 199		UNTIC_COMMENT("Key S-Home")},
-   {"#3", 200		UNTIC_COMMENT("Key S-Insert")},
-   {"#4", 201		UNTIC_COMMENT("Key S-Left")},
-   {"%0", 177		UNTIC_COMMENT("redo key")},
-   {"%1", 168		UNTIC_COMMENT("help key")},
-   {"%2", 169		UNTIC_COMMENT("mark key")},
-   {"%3", 170		UNTIC_COMMENT("message key")},
-   {"%4", 171		UNTIC_COMMENT("move key")},
-   {"%5", 172		UNTIC_COMMENT("next key")},
-   {"%6", 173		UNTIC_COMMENT("open key")},
-   {"%7", 174		UNTIC_COMMENT("options key")},
-   {"%8", 175		UNTIC_COMMENT("previous key")},
-   {"%9", 176		UNTIC_COMMENT("print key")},
-   {"%a", 202		UNTIC_COMMENT("shifted key")},
-   {"%b", 203		UNTIC_COMMENT("shifted key")},
-   {"%c", 204		UNTIC_COMMENT("Key S-Next")},
-   {"%d", 205		UNTIC_COMMENT("shifted key")},
-   {"%e", 206		UNTIC_COMMENT("Key S-Previous")},
-   {"%f", 207		UNTIC_COMMENT("shifted key")},
-   {"%g", 208		UNTIC_COMMENT("shifted key")},
-   {"%h", 209		UNTIC_COMMENT("shifted key")},
-   {"%i", 210		UNTIC_COMMENT("Key S-Right")},
-   {"%j", 211		UNTIC_COMMENT("shifted key")},
-   {"&0", 187		UNTIC_COMMENT("shifted key")},
-   {"&1", 178		UNTIC_COMMENT("reference key")},
-   {"&2", 179		UNTIC_COMMENT("refresh key")},
-   {"&3", 180		UNTIC_COMMENT("replace key")},
-   {"&4", 181		UNTIC_COMMENT("restart key")},
-   {"&5", 182		UNTIC_COMMENT("resume key")},
-   {"&6", 183		UNTIC_COMMENT("save key")},
-   {"&7", 184		UNTIC_COMMENT("suspend key")},
-   {"&8", 185		UNTIC_COMMENT("undo key")},
-   {"&9", 186		UNTIC_COMMENT("shifted key")},
-   {"*0", 197		UNTIC_COMMENT("shifted key")},
-   {"*1", 188		UNTIC_COMMENT("shifted key")},
-   {"*2", 189		UNTIC_COMMENT("shifted key")},
-   {"*3", 190		UNTIC_COMMENT("shifted key")},
-   {"*4", 191		UNTIC_COMMENT("Key S-Delete")},
-   {"*5", 192		UNTIC_COMMENT("shifted key")},
-   {"*6", 193		UNTIC_COMMENT("select key")},
-   {"*7", 194		UNTIC_COMMENT("Key S-End")},
-   {"*8", 195		UNTIC_COMMENT("shifted key")},
-   {"*9", 196		UNTIC_COMMENT("shifted key")},
-   {"@0", 167		UNTIC_COMMENT("find key")},
-   {"@1", 158		UNTIC_COMMENT("begin key")},
-   {"@2", 159		UNTIC_COMMENT("cancel key")},
-   {"@3", 160		UNTIC_COMMENT("close key")},
-   {"@4", 161		UNTIC_COMMENT("command key")},
-   {"@5", 162		UNTIC_COMMENT("copy key")},
-   {"@6", 163		UNTIC_COMMENT("create key")},
-   {"@7", 164 		UNTIC_COMMENT("Key End")},
-   {"@8", 165		UNTIC_COMMENT("enter/send key")},
-   {"@9", 166		UNTIC_COMMENT("exit key")},
-   {"AB", 360 		UNTIC_COMMENT("set ANSI color background")},
-   {"AF", 359 		UNTIC_COMMENT("set ANSI color foreground")},
-   {"AL", 110 		UNTIC_COMMENT("parm_insert_line")},
-   {"CC", 9		UNTIC_COMMENT("terminal settable cmd character in prototype !?")},
-   {"CM", 15		UNTIC_COMMENT("memory relative cursor addressing")},
-   {"CW", 277		UNTIC_COMMENT("define a window #1 from #2, #3 to #4, #5")},
-   {"DC", 105		UNTIC_COMMENT("delete #1 chars")},
-   {"DI", 280		UNTIC_COMMENT("dial number #1")},
-   {"DK", 275		UNTIC_COMMENT("display clock at (#1,#2)")},
-   {"DL", 106 		UNTIC_COMMENT("parm_delete_line")},
-   {"DO", 107		UNTIC_COMMENT("down #1 lines")},
-   {"F1", 216		UNTIC_COMMENT("key_f11")},
-   {"F2", 217		UNTIC_COMMENT("key_f12")},
-   {"F3", 218		UNTIC_COMMENT("key_f13")},
-   {"F4", 219		UNTIC_COMMENT("key_f14")},
-   {"F5", 220		UNTIC_COMMENT("key_f15")},
-   {"F6", 221		UNTIC_COMMENT("key_f16")},
-   {"F7", 222		UNTIC_COMMENT("key_f17")},
-   {"F8", 223		UNTIC_COMMENT("key_f18")},
-   {"F9", 224		UNTIC_COMMENT("key_f19")},
-   {"FA", 225		UNTIC_COMMENT("key_f20")},
-   {"FB", 226		UNTIC_COMMENT("F21 function key")},
-   {"FC", 227		UNTIC_COMMENT("F22 function key")},
-   {"FD", 228		UNTIC_COMMENT("F23 function key")},
-   {"FE", 229		UNTIC_COMMENT("F24 function key")},
-   {"FF", 230		UNTIC_COMMENT("F25 function key")},
-   {"FG", 231		UNTIC_COMMENT("F26 function key")},
-   {"FH", 232		UNTIC_COMMENT("F27 function key")},
-   {"FI", 233		UNTIC_COMMENT("F28 function key")},
-   {"FJ", 234		UNTIC_COMMENT("F29 function key")},
-   {"FK", 235		UNTIC_COMMENT("F30 function key")},
-   {"FL", 236		UNTIC_COMMENT("F31 function key")},
-   {"FM", 237		UNTIC_COMMENT("F32 function key")},
-   {"FN", 238		UNTIC_COMMENT("F33 function key")},
-   {"FO", 239		UNTIC_COMMENT("F34 function key")},
-   {"FP", 240		UNTIC_COMMENT("F35 function key")},
-   {"FQ", 241		UNTIC_COMMENT("F36 function key")},
-   {"FR", 242		UNTIC_COMMENT("F37 function key")},
-   {"FS", 243		UNTIC_COMMENT("F38 function key")},
-   {"FT", 244		UNTIC_COMMENT("F39 function key")},
-   {"FU", 245		UNTIC_COMMENT("F40 function key")},
-   {"FV", 246		UNTIC_COMMENT("F41 function key")},
-   {"FW", 247		UNTIC_COMMENT("F42 function key")},
-   {"FX", 248		UNTIC_COMMENT("F43 function key")},
-   {"FY", 249		UNTIC_COMMENT("F44 function key")},
-   {"FZ", 250		UNTIC_COMMENT("F45 function key")},
-   {"Fa", 251		UNTIC_COMMENT("F46 function key")},
-   {"Fb", 252		UNTIC_COMMENT("F47 function key")},
-   {"Fc", 253		UNTIC_COMMENT("F48 function key")},
-   {"Fd", 254		UNTIC_COMMENT("F49 function key")},
-   {"Fe", 255		UNTIC_COMMENT("F50 function key")},
-   {"Ff", 256		UNTIC_COMMENT("F51 function key")},
-   {"Fg", 257		UNTIC_COMMENT("F52 function key")},
-   {"Fh", 258		UNTIC_COMMENT("F53 function key")},
-   {"Fi", 259		UNTIC_COMMENT("F54 function key")},
-   {"Fj", 260		UNTIC_COMMENT("F55 function key")},
-   {"Fk", 261		UNTIC_COMMENT("F56 function key")},
-   {"Fl", 262		UNTIC_COMMENT("F57 function key")},
-   {"Fm", 263		UNTIC_COMMENT("F58 function key")},
-   {"Fn", 264		UNTIC_COMMENT("F59 function key")},
-   {"Fo", 265		UNTIC_COMMENT("F60 function key")},
-   {"Fp", 266		UNTIC_COMMENT("F61 function key")},
-   {"Fq", 267		UNTIC_COMMENT("F62 function key")},
-   {"Fr", 268		UNTIC_COMMENT("F63 function key")},
-   {"G1", 400		UNTIC_COMMENT("single upper right")},
-   {"G2", 398		UNTIC_COMMENT("single upper left")},
-   {"G3", 399		UNTIC_COMMENT("single lower left")},
-   {"G4", 401		UNTIC_COMMENT("single lower right")},
-   {"GC", 408		UNTIC_COMMENT("single intersection")},
-   {"GD", 405		UNTIC_COMMENT("tee pointing down")},
-   {"GH", 406		UNTIC_COMMENT("single horizontal line")},
-   {"GL", 403		UNTIC_COMMENT("tee pointing left")},
-   {"GR", 402		UNTIC_COMMENT("tee pointing right")},
-   {"GU", 404		UNTIC_COMMENT("tee pointing up")},
-   {"GV", 407		UNTIC_COMMENT("single vertical line")},
-   {"Gm", 358		UNTIC_COMMENT("Curses should get button events")},
-   {"HU", 279		UNTIC_COMMENT("hang-up phone")},
-   {"IC", 108		UNTIC_COMMENT("insert #1 chars")},
-   {"Ic", 299		UNTIC_COMMENT("initialize color #1 to (#2,#3,#4)")},
-   {"Ip", 300		UNTIC_COMMENT("Initialize color pair #1 to fg=(#2,#3,#4), bg=(#5,#6,#7)")},
-   {"K1", 139		UNTIC_COMMENT("upper left of keypad")},
-   {"K2", 141		UNTIC_COMMENT("center of keypad")},
-   {"K3", 140		UNTIC_COMMENT("upper right of keypad")},
-   {"K4", 142		UNTIC_COMMENT("lower left of keypad")},
-   {"K5", 143		UNTIC_COMMENT("lower right of keypad")},
-   {"Km", 355		UNTIC_COMMENT("Mouse event has occurred")},
-   {"LE", 111		UNTIC_COMMENT("move #1 chars to the left")},
-   {"LF", 157		UNTIC_COMMENT("turn off soft labels")},
-   {"LO", 156		UNTIC_COMMENT("turn on soft labels")},
-   {"Lf", 273		UNTIC_COMMENT("label format")},
-   {"MC", 270		UNTIC_COMMENT("clear right and left soft margins")},
-   {"ML", 271		UNTIC_COMMENT("set left soft margin")},
-   {"ML", 368		UNTIC_COMMENT("Set both left and right margins to #1, #2")},
-   {"MR", 272		UNTIC_COMMENT("set right soft margin")},
-   {"MT", 369		UNTIC_COMMENT("Sets both top and bottom margins to #1, #2")},
-   {"Mi", 356		UNTIC_COMMENT("Mouse status information")},
-   {"PA", 285		UNTIC_COMMENT("pause for 2-3 seconds")},
-   {"PU", 283		UNTIC_COMMENT("select pulse dialling")},
-   {"QD", 281		UNTIC_COMMENT("dial number #1 without checking")},
-   {"RA", 152		UNTIC_COMMENT("turn off automatic margins")},
-   {"RC", 276		UNTIC_COMMENT("remove clock")},
-   {"RF", 215		UNTIC_COMMENT("send next input char (for ptys)")},
-   {"RI", 112 		UNTIC_COMMENT("parm_right_cursor")},
-   {"RQ", 357		UNTIC_COMMENT("Request mouse position")},
-   {"RX", 150		UNTIC_COMMENT("turn off xon/xoff handshaking")},
-   {"S1", 378		UNTIC_COMMENT("Display PC character")},
-   {"S2", 379		UNTIC_COMMENT("Enter PC character display mode")},
-   {"S3", 380		UNTIC_COMMENT("Exit PC character display mode")},
-   {"S4", 381		UNTIC_COMMENT("Enter PC scancode mode")},
-   {"S5", 382		UNTIC_COMMENT("Exit PC scancode mode")},
-   {"S6", 383		UNTIC_COMMENT("PC terminal options")},
-   {"S7", 384		UNTIC_COMMENT("Escape for scancode emulation")},
-   {"S8", 385		UNTIC_COMMENT("Alternate escape for scancode emulation")},
-   {"SA", 151		UNTIC_COMMENT("turn on automatic margins")},
-   {"SC", 274		UNTIC_COMMENT("set clock, #1 hrs #2 mins #3 secs")},
-   {"SF", 109		UNTIC_COMMENT("scroll forward #1 lines")},
-   {"SR", 113		UNTIC_COMMENT("scroll back #1 lines")},
-   {"SX", 149		UNTIC_COMMENT("turn on xon/xoff handshaking")},
-   {"Sb", 303 		UNTIC_COMMENT("set background (color)")},
-   {"Sf", 302 		UNTIC_COMMENT("set foreground (color)")},
-   {"TO", 282		UNTIC_COMMENT("select touch tone dialing")},
-   {"UP", 114		UNTIC_COMMENT("up #1 lines")},
-   {"WA", 286		UNTIC_COMMENT("wait for dial-tone")},
-   {"WG", 278		UNTIC_COMMENT("go to window #1")},
-   {"XF", 154		UNTIC_COMMENT("XOFF character")},
-   {"XN", 153		UNTIC_COMMENT("XON character")},
-   {"Xh", 386		UNTIC_COMMENT("Enter horizontal highlight mode")},
-   {"Xl", 387		UNTIC_COMMENT("Enter left highlight mode")},
-   {"Xo", 388		UNTIC_COMMENT("Enter low highlight mode")},
-   {"Xr", 389		UNTIC_COMMENT("Enter right highlight mode")},
-   {"Xt", 390		UNTIC_COMMENT("Enter top highlight mode")},
-   {"Xv", 391		UNTIC_COMMENT("Enter vertical highlight mode")},
-   {"Xy", 370		UNTIC_COMMENT("Repeat bit image cell #1 #2 times")},
-   {"YZ", 377		UNTIC_COMMENT("Set page length to #1 lines")},
-   {"Yv", 372		UNTIC_COMMENT("Move to beginning of same row")},
-   {"Yw", 373		UNTIC_COMMENT("Give name for color #1")},
-   {"Yx", 374		UNTIC_COMMENT("Define rectangualar bit image region")},
-   {"Yy", 375		UNTIC_COMMENT("End a bit-image region")},
-   {"Yz", 376		UNTIC_COMMENT("Change to ribbon color #1")},
-   {"ZA", 304		UNTIC_COMMENT("Change number of characters per inch")},
-   {"ZB", 305		UNTIC_COMMENT("Change number of lines per inch")},
-   {"ZC", 306		UNTIC_COMMENT("Change horizontal resolution")},
-   {"ZD", 307		UNTIC_COMMENT("Change vertical resolution")},
-   {"ZE", 308		UNTIC_COMMENT("Define a character")},
-   {"ZF", 309		UNTIC_COMMENT("Enter double-wide mode")},
-   {"ZG", 310		UNTIC_COMMENT("Enter draft-quality mode")},
-   {"ZH", 311		UNTIC_COMMENT("Enter italic mode")},
-   {"ZI", 312		UNTIC_COMMENT("Start leftward carriage motion")},
-   {"ZJ", 313		UNTIC_COMMENT("Start micro-motion mode")},
-   {"ZK", 314		UNTIC_COMMENT("Enter NLQ mode")},
-   {"ZL", 315		UNTIC_COMMENT("Wnter normal-quality mode")},
-   {"ZM", 316		UNTIC_COMMENT("Enter shadow-print mode")},
-   {"ZN", 317		UNTIC_COMMENT("Enter subscript mode")},
-   {"ZO", 318		UNTIC_COMMENT("Enter superscript mode")},
-   {"ZP", 319		UNTIC_COMMENT("Start upward carriage motion")},
-   {"ZQ", 320		UNTIC_COMMENT("End double-wide mode")},
-   {"ZR", 321		UNTIC_COMMENT("End italic mode")},
-   {"ZS", 322		UNTIC_COMMENT("End left-motion mode")},
-   {"ZT", 323		UNTIC_COMMENT("End micro-motion mode")},
-   {"ZU", 324		UNTIC_COMMENT("End shadow-print mode")},
-   {"ZV", 325		UNTIC_COMMENT("End subscript mode")},
-   {"ZW", 326		UNTIC_COMMENT("End superscript mode")},
-   {"ZX", 327		UNTIC_COMMENT("End reverse character motion")},
-   {"ZY", 328		UNTIC_COMMENT("Like column_address in micro mode")},
-   {"ZZ", 329		UNTIC_COMMENT("Like cursor_down in micro mode")},
-   {"Za", 330		UNTIC_COMMENT("Like cursor_left in micro mode")},
-   {"Zb", 331		UNTIC_COMMENT("Like cursor_right in micro mode")},
-   {"Zc", 332		UNTIC_COMMENT("Like row_address in micro mode")},
-   {"Zd", 333		UNTIC_COMMENT("Like cursor_up in micro mode")},
-   {"Ze", 334		UNTIC_COMMENT("Match software bits to print-head pins")},
-   {"Zf", 335		UNTIC_COMMENT("Like parm_down_cursor in micro mode")},
-   {"Zg", 336		UNTIC_COMMENT("Like parm_left_cursor in micro mode")},
-   {"Zh", 337		UNTIC_COMMENT("Like parm_right_cursor in micro mode")},
-   {"Zi", 338		UNTIC_COMMENT("Like parm_up_cursor in micro mode")},
-   {"Zj", 339		UNTIC_COMMENT("Select character set")},
-   {"Zk", 340		UNTIC_COMMENT("Set bottom margin at current line")},
-   {"Zl", 341		UNTIC_COMMENT("Set bottom margin at line #1 or #2 lines from bottom")},
-   {"Zm", 342		UNTIC_COMMENT("Set left (right) margin at column #1 (#2)")},
-   {"Zn", 343		UNTIC_COMMENT("Set right margin at column #1")},
-   {"Zo", 344		UNTIC_COMMENT("Set top margin at current line")},
-   {"Zp", 345		UNTIC_COMMENT("Set top (bottom) margin at row #1 (#2)")},
-   {"Zq", 346		UNTIC_COMMENT("Start printing bit image braphics")},
-   {"Zr", 347		UNTIC_COMMENT("Start character set definition")},
-   {"Zs", 348		UNTIC_COMMENT("Stop printing bit image graphics")},
-   {"Zt", 349		UNTIC_COMMENT("End definition of character aet")},
-   {"Zu", 350		UNTIC_COMMENT("List of subscriptable characters")},
-   {"Zv", 351		UNTIC_COMMENT("List of superscriptable characters")},
-   {"Zw", 352		UNTIC_COMMENT("Printing any of these chars causes CR")},
-   {"Zx", 353		UNTIC_COMMENT("No motion for subsequent character")},
-   {"Zy", 354		UNTIC_COMMENT("List of character set names")},
-   {"Zz", 371		UNTIC_COMMENT("Move to next row of the bit image")},
-   {"ac", 146 		UNTIC_COMMENT("acs_chars")},
-   {"ae", 38 		UNTIC_COMMENT("exit_alt_charset_mode")},
-   {"al", 53		UNTIC_COMMENT("insert line")},
-   {"as", 25 		UNTIC_COMMENT("enter_alt_charset_mode")},
-   {"bc", 395		UNTIC_COMMENT("move left, if not ^H")},
-   {"bl", 1		UNTIC_COMMENT("audible signal (bell)")},
-   {"bt", 0		UNTIC_COMMENT("back tab")},
-   {"bx", 411		UNTIC_COMMENT("box chars primary set")},
-   {"cb", 269		UNTIC_COMMENT("Clear to beginning of line")},
-   {"cd", 7		UNTIC_COMMENT("clear to end of screen")},
-   {"ce", 6 		UNTIC_COMMENT("clr_eol")},
-   {"ch", 8		UNTIC_COMMENT("horizontal position #1, absolute")},
-   {"ci", 363		UNTIC_COMMENT("Init sequence for multiple codesets")},
-   {"cl", 5		UNTIC_COMMENT("clear screen and home cursor")},
-   {"cm", 10		UNTIC_COMMENT("move to row #1 columns #2")},
-   {"cr", 2		UNTIC_COMMENT("carriage return")},
-   {"cs", 3		UNTIC_COMMENT("change region to line #1 to line #2")},
-   {"ct", 4		UNTIC_COMMENT("clear all tab stops")},
-   {"cv", 127		UNTIC_COMMENT("vertical position #1 absolute")},
-   {"dc", 21		UNTIC_COMMENT("delete character")},
-   {"dl", 22		UNTIC_COMMENT("delete line")},
-   {"dm", 29		UNTIC_COMMENT("enter delete mode")},
-   {"do", 11		UNTIC_COMMENT("down one line")},
-   {"ds", 23		UNTIC_COMMENT("disable status line")},
-   {"dv", 362		UNTIC_COMMENT("Indicate language/codeset support")},
-   {"eA", 155		UNTIC_COMMENT("enable alternate char set")},
-   {"ec", 37		UNTIC_COMMENT("erase #1 characters")},
-   {"ed", 41		UNTIC_COMMENT("end delete mode")},
-   {"ei", 42		UNTIC_COMMENT("exit insert mode")},
-   {"ff", 46		UNTIC_COMMENT("hardcopy terminal page eject")},
-   {"fh", 284		UNTIC_COMMENT("flash switch hook")},
-   {"fs", 47		UNTIC_COMMENT("return from status line")},
-   {"hd", 24		UNTIC_COMMENT("half a line down")},
-   {"ho", 12		UNTIC_COMMENT("home cursor (if no cup)")},
-   {"hu", 137		UNTIC_COMMENT("half a line up")},
-   {"i1", 48		UNTIC_COMMENT("initialization string")},
-   {"i2", 392		UNTIC_COMMENT("secondary initialization string")},
-   {"i3", 50		UNTIC_COMMENT("initialization string")},
-   {"iP", 138		UNTIC_COMMENT("path name of program for initialization")},
-   {"ic", 52		UNTIC_COMMENT("insert character")},
-   {"if", 51		UNTIC_COMMENT("name of initialization file")},
-   {"im", 31		UNTIC_COMMENT("enter insert mode")},
-   {"ip", 54		UNTIC_COMMENT("insert padding after inserted character")},
-   {"is", 49		UNTIC_COMMENT("initialization string")},
-   {"k0", 65		UNTIC_COMMENT("F0 function key")},
-   {"k1", 66		UNTIC_COMMENT("F1 function key")},
-   {"k2", 68		UNTIC_COMMENT("F2 function key")},
-   {"k3", 69		UNTIC_COMMENT("F3 function key")},
-   {"k4", 70		UNTIC_COMMENT("F4 function key")},
-   {"k5", 71		UNTIC_COMMENT("F5 function key")},
-   {"k6", 72		UNTIC_COMMENT("F6 function key")},
-   {"k7", 73		UNTIC_COMMENT("F7 function key")},
-   {"k8", 74		UNTIC_COMMENT("F8 fucntion key")},
-   {"k9", 75		UNTIC_COMMENT("F9 function key")},
-   {"k;", 67		UNTIC_COMMENT("F10 function key")},
-   {"kA", 78		UNTIC_COMMENT("insert-line key")},
-   {"kB", 148		UNTIC_COMMENT("back-tab key")},
-   {"kC", 57		UNTIC_COMMENT("clear-screen or erase key")},
-   {"kD", 59		UNTIC_COMMENT("delete-character key")},
-   {"kE", 63		UNTIC_COMMENT("clear-to-end-of-line key")},
-   {"kF", 84		UNTIC_COMMENT("scroll-forward key")},
-   {"kH", 80		UNTIC_COMMENT("last-line key")},
-   {"kI", 77		UNTIC_COMMENT("insert-character key")},
-   {"kL", 60		UNTIC_COMMENT("delete-line key")},
-   {"kM", 62		UNTIC_COMMENT("sent by rmir or smir in insert mode")},
-   {"kN", 81		UNTIC_COMMENT("next-page key")},
-   {"kP", 82		UNTIC_COMMENT("prev-page key")},
-   {"kR", 85		UNTIC_COMMENT("scroll-backward key")},
-   {"kS", 64		UNTIC_COMMENT("clear-to-end-of-screen key")},
-   {"kT", 86		UNTIC_COMMENT("set-tab key")},
-   {"ka", 56		UNTIC_COMMENT("clear-all-tabs key")},
-   {"kb", 55		UNTIC_COMMENT("backspace key")},
-   {"kd", 61		UNTIC_COMMENT("down-arrow key")},
-   {"ke", 88		UNTIC_COMMENT("leave 'keyboard_transmit' mode")},
-   {"kh", 76		UNTIC_COMMENT("home key")},
-   {"kl", 79		UNTIC_COMMENT("left-arrow key")},
-   {"ko", 396		UNTIC_COMMENT("list of self-mapped keycaps")},
-   {"kr", 83		UNTIC_COMMENT("right-arrow key")},
-   {"ks", 89		UNTIC_COMMENT("enter 'keyboard_transmit' mode")},
-   {"kt", 58		UNTIC_COMMENT("clear-tab key")},
-   {"ku", 87		UNTIC_COMMENT("up-arrow key")},
-   {"l0", 90		UNTIC_COMMENT("label on function key f0 if not f0")},
-   {"l1", 91		UNTIC_COMMENT("label on function key f1 if not f1")},
-   {"l2", 93		UNTIC_COMMENT("label on function key f2 if not f2")},
-   {"l3", 94		UNTIC_COMMENT("label on function key f3 if not f3")},
-   {"l4", 95		UNTIC_COMMENT("label on function key f4 if not f4")},
-   {"l5", 96		UNTIC_COMMENT("lable on function key f5 if not f5")},
-   {"l6", 97		UNTIC_COMMENT("label on function key f6 if not f6")},
-   {"l7", 98		UNTIC_COMMENT("label on function key f7 if not f7")},
-   {"l8", 99		UNTIC_COMMENT("label on function key f8 if not f8")},
-   {"l9", 100		UNTIC_COMMENT("label on function key f9 if not f9")},
-   {"la", 92		UNTIC_COMMENT("label on function key f10 if not f10")},
-   {"le", 14		UNTIC_COMMENT("move left one space")},
-   {"ll", 18		UNTIC_COMMENT("last line, first column (if no cup)")},
-   {"ma", 397		UNTIC_COMMENT("map arrow keys rogue(1) motion keys")},
-   {"mb", 26		UNTIC_COMMENT("turn on blinking")},
-   {"md", 27		UNTIC_COMMENT("turn on bold (extra bright) mode")},
-   {"me", 39		UNTIC_COMMENT("turn off all attributes")},
-   {"mh", 30		UNTIC_COMMENT("turn on half-bright mode")},
-   {"mk", 32		UNTIC_COMMENT("turn on blank mode (characters invisible)")},
-   {"ml", 409		UNTIC_COMMENT("memory lock above")},
-   {"mm", 102		UNTIC_COMMENT("turn on meta mode (8th-bit on)")},
-   {"mo", 101		UNTIC_COMMENT("turn off meta mode")},
-   {"mp", 33		UNTIC_COMMENT("turn on protected mode")},
-   {"mr", 34		UNTIC_COMMENT("turn on reverse video mode")},
-   {"mu", 410		UNTIC_COMMENT("memory unlock")},
-   {"nd", 17		UNTIC_COMMENT("move right one space")},
-   {"nl", 394		UNTIC_COMMENT("use to move down")},
-   {"nw", 103		UNTIC_COMMENT("newline (behave like cr followed by lf)")},
-   {"oc", 298		UNTIC_COMMENT("Set all color pairs to the original ones")},
-   {"op", 297		UNTIC_COMMENT("Set default pair to its original value")},
-   {"pO", 144		UNTIC_COMMENT("turn on printer for #1 bytes")},
-   {"pc", 104		UNTIC_COMMENT("padding char (instead of null)")},
-   {"pf", 119		UNTIC_COMMENT("turn off printer")},
-   {"pk", 115		UNTIC_COMMENT("program function key #1 to type string #2")},
-   {"pl", 116		UNTIC_COMMENT("program function key #1 to execute string #2")},
-   {"pn", 147		UNTIC_COMMENT("program label #1 to show string #2")},
-   {"po", 120		UNTIC_COMMENT("turn on printer")},
-   {"ps", 118		UNTIC_COMMENT("print contents of screen")},
-   {"px", 117		UNTIC_COMMENT("program function key #1 to transmit string #2")},
-   {"r1", 122		UNTIC_COMMENT("reset string")},
-   {"r2", 123		UNTIC_COMMENT("reset string")},
-   {"r3", 124		UNTIC_COMMENT("reset string")},
-   {"rP", 145		UNTIC_COMMENT("like ip but when in insert mode")},
-   {"rc", 126		UNTIC_COMMENT("restore cursor to last position of sc")},
-   {"rf", 125		UNTIC_COMMENT("name of reset file")},
-   {"rp", 121		UNTIC_COMMENT("repeat char #1 #2 times")},
-   {"rs", 393		UNTIC_COMMENT("terminal reset string")},
-   {"s0", 364		UNTIC_COMMENT("Shift to code set 0 (EUC set 0, ASCII)")},
-   {"s1", 365		UNTIC_COMMENT("Shift to code set 1")},
-   {"s2", 366		UNTIC_COMMENT("Shift to code set 2")},
-   {"s3", 367		UNTIC_COMMENT("Shift to code set 3")},
-   {"sa", 131		UNTIC_COMMENT("define video attributes #1-#9 (PG9)")},
-   {"sc", 128		UNTIC_COMMENT("save current cursor position")},
-   {"se", 43		UNTIC_COMMENT("exit standout mode")},
-   {"sf", 129		UNTIC_COMMENT("scroll text up")},
-   {"so", 35		UNTIC_COMMENT("begin standout mode")},
-   {"sp", 301		UNTIC_COMMENT("Set current color pair to #1")},
-   {"sr", 130		UNTIC_COMMENT("scroll text down")},
-   {"st", 132		UNTIC_COMMENT("set a tab in every row, current columns")},
-   {"ta", 134		UNTIC_COMMENT("tab to next 8-space hardware tab stop")},
-   {"te", 40		UNTIC_COMMENT("strings to end programs using cup")},
-   {"ti", 28		UNTIC_COMMENT("string to start programs using cup")},
-   {"ts", 135		UNTIC_COMMENT("move to status line")},
-   {"u0", 287		UNTIC_COMMENT("User string #0")},
-   {"u1", 288		UNTIC_COMMENT("User string #1")},
-   {"u2", 289		UNTIC_COMMENT("User string #2")},
-   {"u3", 290		UNTIC_COMMENT("User string #3")},
-   {"u4", 291		UNTIC_COMMENT("User string #4")},
-   {"u5", 292		UNTIC_COMMENT("User string #5")},
-   {"u6", 293		UNTIC_COMMENT("User string #6")},
-   {"u7", 294		UNTIC_COMMENT("User string #7")},
-   {"u8", 295		UNTIC_COMMENT("User string #8")},
-   {"u9", 296		UNTIC_COMMENT("User string #9")},
-   {"uc", 136		UNTIC_COMMENT("underline char and move past it")},
-   {"ue", 44		UNTIC_COMMENT("exit underline mode")},
-   {"up", 19		UNTIC_COMMENT("up one line")},
-   {"us", 36		UNTIC_COMMENT("begin underline mode")},
-   {"vb", 45		UNTIC_COMMENT("visible bell (may not move cursor)")},
-   {"ve", 16		UNTIC_COMMENT("make cursor appear normal (undo civis/cvvis)")},
-   {"vi", 13		UNTIC_COMMENT("make cursor invisible")},
-   {"vs", 20		UNTIC_COMMENT("make cursor very visible")},
-   {"wi", 133		UNTIC_COMMENT("current window is lines #1-#2 cols #3-#4")},
-   {"xl", 361		UNTIC_COMMENT("Program function key #1 to type string #2 and show string #3")},
-   {"", -1		UNTIC_COMMENT(NULL)}
-};
-
-static int compute_cap_offset (char *cap, SLterminfo_Type *t, Tgetstr_Map_Type *map, unsigned int max_ofs)
-{
-   char cha, chb;
-
-   (void) t;
-   cha = *cap++; chb = *cap;
-
-   while (*map->name != 0)
-     {
-	if ((cha == *map->name) && (chb == *(map->name + 1)))
-	  {
-	     if (map->offset >= (int) max_ofs) return -1;
-	     return map->offset;
-	  }
-	map++;
-     }
-   return -1;
-}
-
-char *_SLtt_tigetstr (SLterminfo_Type *t, char *cap)
-{
-   int offset;
-
-   if (t == NULL)
-     return NULL;
-
-   if (t->flags == SLTERMCAP) return tcap_getstr (cap, t);
-
-   offset = compute_cap_offset (cap, t, Tgetstr_Map, t->num_string_offsets);
-   if (offset < 0) return NULL;
-   offset = make_integer (t->string_offsets + 2 * offset);
-   if (offset < 0) return NULL;
-   return t->string_table + offset;
-}
-
-static Tgetstr_Map_Type Tgetnum_Map[] =
-{
-   {"BT", 30		UNTIC_COMMENT("number of buttons on mouse")},
-   {"Co", 13		UNTIC_COMMENT("maximum numbers of colors on screen")},
-   {"MW", 12		UNTIC_COMMENT("maxumum number of defineable windows")},
-   {"NC", 15		UNTIC_COMMENT("video attributes that can't be used with colors")},
-   {"Nl", 8		UNTIC_COMMENT("number of labels on screen")},
-   {"Ya", 16		UNTIC_COMMENT("numbers of bytes buffered before printing")},
-   {"Yb", 17		UNTIC_COMMENT("spacing of pins vertically in pins per inch")},
-   {"Yc", 18		UNTIC_COMMENT("spacing of dots horizontally in dots per inch")},
-   {"Yd", 19		UNTIC_COMMENT("maximum value in micro_..._address")},
-   {"Ye", 20		UNTIC_COMMENT("maximum value in parm_..._micro")},
-   {"Yf", 21		UNTIC_COMMENT("character size when in micro mode")},
-   {"Yg", 22		UNTIC_COMMENT("line size when in micro mode")},
-   {"Yh", 23		UNTIC_COMMENT("numbers of pins in print-head")},
-   {"Yi", 24		UNTIC_COMMENT("horizontal resolution in units per line")},
-   {"Yj", 25		UNTIC_COMMENT("vertical resolution in units per line")},
-   {"Yk", 26		UNTIC_COMMENT("horizontal resolution in units per inch")},
-   {"Yl", 27		UNTIC_COMMENT("vertical resolution in units per inch")},
-   {"Ym", 28		UNTIC_COMMENT("print rate in chars per second")},
-   {"Yn", 29		UNTIC_COMMENT("character step size when in double wide mode")},
-   {"Yo", 31		UNTIC_COMMENT("number of passed for each bit-image row")},
-   {"Yp", 32		UNTIC_COMMENT("type of bit-image device")},
-   {"co", 0		UNTIC_COMMENT("number of columns in aline")},
-   {"dB", 36		UNTIC_COMMENT("padding required for ^H")},
-   {"dC", 34		UNTIC_COMMENT("pad needed for CR")},
-   {"dN", 35		UNTIC_COMMENT("pad needed for LF")},
-   {"dT", 37		UNTIC_COMMENT("padding required for ^I")},
-   {"it", 1		UNTIC_COMMENT("tabs initially every # spaces")},
-   {"kn", 38		UNTIC_COMMENT("count of function keys")},
-   {"lh", 9		UNTIC_COMMENT("rows in each label")},
-   {"li", 2		UNTIC_COMMENT("number of lines on screen or page")},
-   {"lm", 3		UNTIC_COMMENT("lines of memory if > line. 0 => varies")},
-   {"lw", 10		UNTIC_COMMENT("columns in each label")},
-   {"ma", 11		UNTIC_COMMENT("maximum combined attributes terminal can handle")},
-   {"pa", 14		UNTIC_COMMENT("maximum number of color-pairs on the screen")},
-   {"pb", 5		UNTIC_COMMENT("lowest baud rate where padding needed")},
-   {"sg", 4		UNTIC_COMMENT("number of blank chars left by smso or rmso")},
-   {"ug", 33		UNTIC_COMMENT("number of blanks left by ul")},
-   {"vt", 6		UNTIC_COMMENT("virtual terminal number (CB/unix)")},
-   {"ws", 7		UNTIC_COMMENT("columns in status line")},
-   {"", -1		UNTIC_COMMENT(NULL)}
-};
-
-int _SLtt_tigetnum (SLterminfo_Type *t, char *cap)
-{
-   int offset;
-
-   if (t == NULL)
-     return -1;
-
-   if (t->flags == SLTERMCAP) return tcap_getnum (cap, t);
-
-   offset = compute_cap_offset (cap, t, Tgetnum_Map, t->num_numbers);
-   if (offset < 0) return -1;
-   return make_integer (t->numbers + 2 * offset);
-}
-
-static Tgetstr_Map_Type Tgetflag_Map[] =
-{
-   {"5i", 22		UNTIC_COMMENT("printer won't echo on screen")},
-   {"HC", 23		UNTIC_COMMENT("cursor is hard to see")},
-   {"MT", 40		UNTIC_COMMENT("has meta key")},
-   {"ND", 26		UNTIC_COMMENT("scrolling region is non-destructive")},
-   {"NL", 41		UNTIC_COMMENT("move down with \n")},
-   {"NP", 25		UNTIC_COMMENT("pad character does not exist")},
-   {"NR", 24		UNTIC_COMMENT("smcup does not reverse rmcup")},
-   {"YA", 30		UNTIC_COMMENT("only positive motion for hpa/mhpa caps")},
-   {"YB", 31		UNTIC_COMMENT("using cr turns off micro mode")},
-   {"YC", 32		UNTIC_COMMENT("printer needs operator to change character set")},
-   {"YD", 33		UNTIC_COMMENT("only positive motion for vpa/mvpa caps")},
-   {"YE", 34		UNTIC_COMMENT("printing in last column causes cr")},
-   {"YF", 35		UNTIC_COMMENT("changing character pitch changes resolution")},
-   {"YG", 36		UNTIC_COMMENT("changing line pitch changes resolution")},
-   {"am", 1		UNTIC_COMMENT("terminal has automatic margins")},
-   {"bs", 37		UNTIC_COMMENT("uses ^H to move left")},
-   {"bw", 0		UNTIC_COMMENT("cub1 wraps from column 0 to last column")},
-   {"cc", 27		UNTIC_COMMENT("terminal can re-define existing colors")},
-   {"da", 11		UNTIC_COMMENT("display may be retained above the screen")},
-   {"db", 12		UNTIC_COMMENT("display may be retained below the screen")},
-   {"eo", 5		UNTIC_COMMENT("can erase overstrikes with a blank")},
-   {"es", 16		UNTIC_COMMENT("escape can be used on the status line")},
-   {"gn", 6		UNTIC_COMMENT("generic line type")},
-   {"hc", 7		UNTIC_COMMENT("hardcopy terminal")},
-   {"hl", 29		UNTIC_COMMENT("terminal uses only HLS color notation (tektronix)")},
-   {"hs", 9		UNTIC_COMMENT("has extra status line")},
-   {"hz", 18		UNTIC_COMMENT("can't print ~'s (hazeltine)")},
-   {"in", 10		UNTIC_COMMENT("insert mode distinguishes nulls")},
-   {"km", 8		UNTIC_COMMENT("Has a meta key, sets msb high")},
-   {"mi", 13		UNTIC_COMMENT("safe to move while in insert mode")},
-   {"ms", 14		UNTIC_COMMENT("safe to move while in standout mode")},
-   {"nc", 39		UNTIC_COMMENT("no way to go to start of line")},
-   {"ns", 38		UNTIC_COMMENT("crt cannot scroll")},
-   {"nx", 21		UNTIC_COMMENT("padding won't work, xon/xoff required")},
-   {"os", 15		UNTIC_COMMENT("terminal can overstrike")},
-   {"pt", 42		UNTIC_COMMENT("has 8-char tabs invoked with ^I")},
-   {"ul", 19		UNTIC_COMMENT("underline character overstrikes")},
-   {"ut", 28		UNTIC_COMMENT("screen erased with background color")},
-   {"xb", 2		UNTIC_COMMENT("beehive (f1=escape, f2=ctrl C)")},
-   {"xn", 4		UNTIC_COMMENT("newline ignored after 80 cols (concept)")},
-   {"xo", 20		UNTIC_COMMENT("terminal uses xon/xoff handshaking")},
-   {"xr", 43		UNTIC_COMMENT("return clears the line")},
-   {"xs", 3		UNTIC_COMMENT("standout not erased by overwriting (hp)")},
-   {"xt", 17		UNTIC_COMMENT("tabs destructive, magic so char (t1061)")},
-   {"", -1		UNTIC_COMMENT(NULL)}
-};
-
-int _SLtt_tigetflag (SLterminfo_Type *t, char *cap)
-{
-   int offset;
-
-   if (t == NULL) return -1;
-
-   if (t->flags == SLTERMCAP) return tcap_getflag (cap, t);
-
-   offset = compute_cap_offset (cap, t, Tgetflag_Map, t->boolean_section_size);
-
-   if (offset < 0) return -1;
-   return (int) *(t->boolean_flags + offset);
-}
-
-/* These are my termcap routines.  They only work with the TERMCAP environment
- * variable.  This variable must contain the termcap entry and NOT the file.
- */
-
-static int tcap_getflag (char *cap, SLterminfo_Type *t)
-{
-   char a, b;
-   char *f = (char *) t->boolean_flags;
-   char *fmax;
-
-   if (f == NULL) return 0;
-   fmax = f + t->boolean_section_size;
-
-   a = *cap;
-   b = *(cap + 1);
-   while (f < fmax)
-     {
-	if ((a == f[0]) && (b == f[1]))
-	  return 1;
-	f += 2;
-     }
-   return 0;
-}
-
-static char *tcap_get_cap (unsigned char *cap, unsigned char *caps, unsigned int len)
-{
-   unsigned char c0, c1;
-   unsigned char *caps_max;
-
-   c0 = cap[0];
-   c1 = cap[1];
-
-   if (caps == NULL) return NULL;
-   caps_max = caps + len;
-   while (caps < caps_max)
-     {
-	if ((c0 == caps[0]) && (c1 == caps[1]))
-	  {
-	     return (char *) caps + 3;
-	  }
-	caps += (int) caps[2];
-     }
-   return NULL;
-}
-
-static int tcap_getnum (char *cap, SLterminfo_Type *t)
-{
-   cap = tcap_get_cap ((unsigned char *) cap, t->numbers, t->num_numbers);
-   if (cap == NULL) return -1;
-   return atoi (cap);
-}
-
-static char *tcap_getstr (char *cap, SLterminfo_Type *t)
-{
-   return tcap_get_cap ((unsigned char *) cap, (unsigned char *) t->string_table, t->string_table_size);
-}
-
-static int tcap_extract_field (unsigned char *t0)
-{
-   register unsigned char ch, *t = t0;
-   while (((ch = *t) != 0) && (ch != ':')) t++;
-   if (ch == ':') return (int) (t - t0);
-   return -1;
-}
-
-int SLtt_Try_Termcap = 1;
-static int tcap_getent (char *term, SLterminfo_Type *ti)
-{
-   unsigned char *termcap, ch;
-   unsigned char *buf, *b;
-   unsigned char *t;
-   int len;
-
-   if (SLtt_Try_Termcap == 0) return -1;
-#if 1
-   /* XFREE86 xterm sets the TERMCAP environment variable to an invalid
-    * value.  Specifically, it lacks the tc= string.
-    */
-   if (!strncmp (term, "xterm", 5))
-     return -1;
-#endif
-   termcap = (unsigned char *) getenv ("TERMCAP");
-   if ((termcap == NULL) || (*termcap == '/')) return -1;
-
-   /* We have a termcap so lets use it provided it does not have a reference
-    * to another terminal via tc=.  In that case, use terminfo.  The alternative
-    * would be to parse the termcap file which I do not want to do right now.
-    * Besides, this is a terminfo based system and if the termcap were parsed
-    * terminfo would almost never get a chance to run.  In addition, the tc=
-    * thing should not occur if tset is used to set the termcap entry.
-    */
-   t = termcap;
-   while ((len = tcap_extract_field (t)) != -1)
-     {
-	if ((len > 3) && (t[0] == 't') && (t[1] == 'c') && (t[2] == '='))
-	  return -1;
-	t += (len + 1);
-     }
-
-   /* malloc some extra space just in case it is needed. */
-   len = strlen ((char *) termcap) + 256;
-   if (NULL == (buf = (unsigned char *) SLmalloc ((unsigned int) len))) return -1;
-
-   b = buf;
-
-   /* The beginning of the termcap entry contains the names of the entry.
-    * It is terminated by a colon.
-    */
-
-   ti->terminal_names = (char *) b;
-   t = termcap;
-   len = tcap_extract_field (t);
-   if (len < 0)
-     {
-	SLfree ((char *)buf);
-	return -1;
-     }
-   strncpy ((char *) b, (char *) t, (unsigned int) len);
-   b[len] = 0;
-   b += len + 1;
-   ti->name_section_size = len;
-
-   /* Now, we are really at the start of the termcap entries.  Point the
-    * termcap variable here since we want to refer to this a number of times.
-    */
-   termcap = t + (len + 1);
-
-   /* Process strings first. */
-   ti->string_table = (char *) b;
-   t = termcap;
-   while (-1 != (len = tcap_extract_field (t)))
-     {
-	unsigned char *b1;
-	unsigned char *tmax;
-
-	/* We are looking for: XX=something */
-	if ((len < 4) || (t[2] != '=') || (*t == '.'))
-	  {
-	     t += len + 1;
-	     continue;
-	  }
-	tmax = t + len;
-	b1 = b;
-
-	while (t < tmax)
-	  {
-	     ch = *t++;
-	     if ((ch == '\\') && (t < tmax))
-	       {
-		  t = (unsigned char *) _SLexpand_escaped_char ((char *) t, (char *) &ch);
-	       }
-	     else if ((ch == '^') && (t < tmax))
-	       {
-		  ch = *t++;
-		  if (ch == '?') ch = 127;
-		  else ch = (ch | 0x20) - ('a' - 1);
-	       }
-	     *b++ = ch;
-	  }
-	/* Null terminate it. */
-	*b++ = 0;
-	len = (int) (b - b1);
-	b1[2] = (unsigned char) len;    /* replace the = by the length */
-	/* skip colon to next field. */
-	t++;
-     }
-   ti->string_table_size = (int) (b - (unsigned char *) ti->string_table);
-
-   /* Now process the numbers. */
-
-   t = termcap;
-   ti->numbers = b;
-   while (-1 != (len = tcap_extract_field (t)))
-     {
-	unsigned char *b1;
-	unsigned char *tmax;
-
-	/* We are looking for: XX#NUMBER */
-	if ((len < 4) || (t[2] != '#') || (*t == '.'))
-	  {
-	     t += len + 1;
-	     continue;
-	  }
-	tmax = t + len;
-	b1 = b;
-
-	while (t < tmax)
-	  {
-	     *b++ = *t++;
-	  }
-	/* Null terminate it. */
-	*b++ = 0;
-	len = (int) (b - b1);
-	b1[2] = (unsigned char) len;    /* replace the # by the length */
-	t++;
-     }
-   ti->num_numbers = (int) (b - ti->numbers);
-
-   /* Now process the flags. */
-   t = termcap;
-   ti->boolean_flags = b;
-   while (-1 != (len = tcap_extract_field (t)))
-     {
-	/* We are looking for: XX#NUMBER */
-	if ((len != 2) || (*t == '.') || (*t <= ' '))
-	  {
-	     t += len + 1;
-	     continue;
-	  }
-	b[0] = t[0];
-	b[1] = t[1];
-	t += 3;
-	b += 2;
-     }
-   ti->boolean_section_size = (int) (b - ti->boolean_flags);
-   ti->flags = SLTERMCAP;
-   return 0;
-}
-
-
-/* These routines are provided only for backward binary compatability.
- * They will vanish in V2.x
- */
-char *SLtt_tigetent (char *s)
-{
-   return (char *) _SLtt_tigetent (s);
-}
-
-extern char *SLtt_tigetstr (char *s, char **p)
-{
-   if (p == NULL)
-     return NULL;
-   return _SLtt_tigetstr ((SLterminfo_Type *) *p, s);
-}
-
-extern int SLtt_tigetnum (char *s, char **p)
-{
-   if (p == NULL)
-     return -1;
-   return _SLtt_tigetnum ((SLterminfo_Type *) *p, s);
-}
-
-
diff --git a/mdk-stage1/slang/sltime.c b/mdk-stage1/slang/sltime.c
deleted file mode 100644
index 14fc6ec16..000000000
--- a/mdk-stage1/slang/sltime.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/* time related system calls */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <sys/types.h>
-#include <time.h>
-
-#if defined(__BORLANDC__)
-# include <dos.h>
-#endif
-#if defined(__GO32__) || defined(__WATCOMC__)
-# include <dos.h>
-# include <bios.h>
-#endif
-
-#include <errno.h>
-
-#include "slang.h"
-#include "_slang.h"
-
-#ifdef __WIN32__
-#include <windows.h>
-/* Sleep is defined badly in MSVC... */
-# ifdef _MSC_VER
-#  define sleep(n) _sleep((n)*1000)
-# else
-#  ifdef sleep
-#   undef sleep
-#  endif
-#  define sleep(x) if(x)Sleep((x)*1000)
-# endif
-#endif
-
-
-#if defined(IBMPC_SYSTEM)
-/* For other system (Unix and VMS), _SLusleep is in sldisply.c */
-int _SLusleep (unsigned long s)
-{
-   sleep (s/1000000L);
-   s = s % 1000000L;
-
-# if defined(__WIN32__)
-   Sleep (s/1000);
-#else
-# if defined(__IBMC__)
-   DosSleep(s/1000);
-# else
-#  if defined(_MSC_VER)
-   _sleep (s/1000);
-#  endif
-# endif
-#endif
-   return 0;
-}
-#endif
-
-#if defined(__IBMC__) && !defined(_AIX)
-/* sleep is not a standard function in VA3. */
-unsigned int sleep (unsigned int seconds)
-{
-   DosSleep(1000L * ((long)seconds));
-   return 0;
-}
-#endif
-
-static char *ctime_cmd (unsigned long *tt)
-{
-   char *t;
-
-   t = ctime ((time_t *) tt);
-   t[24] = 0;  /* knock off \n */
-   return (t);
-}
-
-static void sleep_cmd (void)
-{
-   unsigned int secs;
-#if SLANG_HAS_FLOAT
-   unsigned long usecs;
-   double x;
-
-   if (-1 == SLang_pop_double (&x, NULL, NULL))
-     return;
-
-   if (x < 0.0) 
-     x = 0.0;
-   secs = (unsigned int) x;
-   sleep (secs);
-   x -= (double) secs;
-   usecs = (unsigned long) (1e6 * x);
-   if (usecs > 0) _SLusleep (usecs);
-#else
-   if (-1 == SLang_pop_uinteger (&secs))
-     return;
-   if (secs != 0) sleep (secs);
-#endif
-}
-
-static unsigned long _time_cmd (void)
-{
-   return (unsigned long) time (NULL);
-}
-
-#if defined(__GO32__)
-static char *djgpp_current_time (void) /*{{{*/
-{
-   union REGS rg;
-   unsigned int year;
-   unsigned char month, day, weekday, hour, minute, sec;
-   char days[] = "SunMonTueWedThuFriSat";
-   char months[] = "JanFebMarAprMayJunJulAugSepOctNovDec";
-   static char the_date[26];
-
-   rg.h.ah = 0x2A;
-#ifndef __WATCOMC__
-   int86(0x21, &rg, &rg);
-   year = rg.x.cx & 0xFFFF;
-#else
-   int386(0x21, &rg, &rg);
-   year = rg.x.ecx & 0xFFFF;
-#endif
-
-   month = 3 * (rg.h.dh - 1);
-   day = rg.h.dl;
-   weekday = 3 * rg.h.al;
-
-   rg.h.ah = 0x2C;
-
-#ifndef __WATCOMC__
-   int86(0x21, &rg, &rg);
-#else
-   int386(0x21, &rg, &rg);
-#endif
-
-   hour = rg.h.ch;
-   minute = rg.h.cl;
-   sec = rg.h.dh;
-
-   /* we want this form: Thu Apr 14 15:43:39 1994\n  */
-   sprintf(the_date, "%.3s %.3s%3d %02d:%02d:%02d %d\n",
-	   days + weekday, months + month,
-	   day, hour, minute, sec, year);
-   return the_date;
-}
-
-/*}}}*/
-
-#endif
-
-char *SLcurrent_time_string (void) /*{{{*/
-{
-   char *the_time;
-#ifndef __GO32__
-   time_t myclock;
-
-   myclock = time((time_t *) 0);
-   the_time = (char *) ctime(&myclock);
-#else
-   the_time = djgpp_current_time ();
-#endif
-   /* returns the form Sun Sep 16 01:03:52 1985\n\0 */
-   the_time[24] = '\0';
-   return(the_time);
-}
-
-/*}}}*/
-
-static int push_tm_struct (struct tm *tms)
-{
-   char *field_names [9];
-   unsigned char field_types[9];
-   VOID_STAR field_values [9];
-   int int_values [9];
-   unsigned int i;
-
-   if (tms == NULL)
-     return SLang_push_null ();
-
-   field_names [0] = "tm_sec"; int_values [0] = tms->tm_sec;
-   field_names [1] = "tm_min"; int_values [1] = tms->tm_min;
-   field_names [2] = "tm_hour"; int_values [2] = tms->tm_hour;
-   field_names [3] = "tm_mday"; int_values [3] = tms->tm_mday;
-   field_names [4] = "tm_mon"; int_values [4] = tms->tm_mon;
-   field_names [5] = "tm_year"; int_values [5] = tms->tm_year;
-   field_names [6] = "tm_wday"; int_values [6] = tms->tm_wday;
-   field_names [7] = "tm_yday"; int_values [7] = tms->tm_yday;
-   field_names [8] = "tm_isdst"; int_values [8] = tms->tm_isdst;
-
-   for (i = 0; i < 9; i++)
-     {
-	field_types [i] = SLANG_INT_TYPE;
-	field_values [i] = (VOID_STAR) (int_values + i);
-     }
-
-   return SLstruct_create_struct (9, field_names, field_types, field_values);
-}
-
-
-static void localtime_cmd (long *t)
-{
-   time_t tt = (time_t) *t;
-   (void) push_tm_struct (localtime (&tt));
-}
-   
-static void gmtime_cmd (long *t)
-{
-#ifdef HAVE_GMTIME
-   time_t tt = (time_t) *t;
-   (void) push_tm_struct (gmtime (&tt));
-#else
-   localtime_cmd (t);
-#endif
-}
-
-#ifdef HAVE_TIMES
-
-# ifdef HAVE_SYS_TIMES_H
-#  include <sys/times.h>
-# endif
-
-#include <limits.h>
-
-#ifdef CLK_TCK
-# define SECS_PER_TICK (1.0/(double)CLK_TCK)
-#else 
-# ifdef CLOCKS_PER_SEC
-#  define SECS_PER_TICK (1.0/(double)CLOCKS_PER_SEC)
-# else
-#  define SECS_PER_TICK (1.0/60.0)
-# endif
-#endif
-
-static void times_cmd (void)
-{
-   double dvals[4];
-   struct tms t;
-   VOID_STAR field_values[4];
-   char *field_names[4];
-   unsigned int i;
-   unsigned char field_types[4];
-   
-   (void) times (&t);
-
-   field_names[0] = "tms_utime";   dvals[0] = (double)t.tms_utime; 
-   field_names[1] = "tms_stime";   dvals[1] = (double)t.tms_stime; 
-   field_names[2] = "tms_cutime";  dvals[2] = (double)t.tms_cutime;
-   field_names[3] = "tms_cstime";  dvals[3] = (double)t.tms_cstime;
-
-   for (i = 0; i < 4; i++)
-     {
-	dvals[i] *= SECS_PER_TICK;
-	field_values[i] = (VOID_STAR) &dvals[i];
-	field_types[i] = SLANG_DOUBLE_TYPE;
-     }
-   (void) SLstruct_create_struct (4, field_names, field_types, field_values);
-}
-
-static struct tms Tic_TMS;
-
-static void tic_cmd (void)
-{
-   (void) times (&Tic_TMS);
-}
-
-static double toc_cmd (void)
-{
-   struct tms t;
-   double d;
-
-   (void) times (&t);
-   d = ((t.tms_utime - Tic_TMS.tms_utime)
-	+ (t.tms_stime - Tic_TMS.tms_stime)) * SECS_PER_TICK;
-   Tic_TMS = t;
-   return d;
-}
-
-#endif				       /* HAVE_TIMES */
-
-
-static SLang_Intrin_Fun_Type Time_Funs_Table [] =
-{
-   MAKE_INTRINSIC_1("ctime", ctime_cmd, SLANG_STRING_TYPE, SLANG_ULONG_TYPE),
-   MAKE_INTRINSIC_0("sleep", sleep_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("_time", _time_cmd, SLANG_ULONG_TYPE),
-   MAKE_INTRINSIC_0("time", SLcurrent_time_string, SLANG_STRING_TYPE),
-   MAKE_INTRINSIC_1("localtime", localtime_cmd, SLANG_VOID_TYPE, SLANG_LONG_TYPE),
-   MAKE_INTRINSIC_1("gmtime", gmtime_cmd, SLANG_VOID_TYPE, SLANG_LONG_TYPE),
-
-#ifdef HAVE_TIMES
-   MAKE_INTRINSIC_0("times", times_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("tic", tic_cmd, SLANG_VOID_TYPE),
-   MAKE_INTRINSIC_0("toc", toc_cmd, SLANG_DOUBLE_TYPE),
-#endif
-   SLANG_END_INTRIN_FUN_TABLE
-};
-
-int _SLang_init_sltime (void)
-{
-#ifdef HAVE_TIMES
-   (void) tic_cmd ();
-#endif
-   return SLadd_intrin_fun_table (Time_Funs_Table, NULL);
-}
-
diff --git a/mdk-stage1/slang/sltoken.c b/mdk-stage1/slang/sltoken.c
deleted file mode 100644
index d08967a24..000000000
--- a/mdk-stage1/slang/sltoken.c
+++ /dev/null
@@ -1,1702 +0,0 @@
-/* Copyright (c) 1998, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-#include "slinclud.h"
-
-#include "slang.h"
-#include "_slang.h"
-
-#define MAX_TOKEN_LEN 254
-#define MAX_FILE_LINE_LEN 256
-
-static char Empty_Line[1] = {0};
-
-static int Default_Compile_Line_Num_Info;
-static char *Input_Line = Empty_Line;
-static char *Input_Line_Pointer;
-
-static SLPreprocess_Type *This_SLpp;
-
-static SLang_Load_Type *LLT;
-
-static char *map_token_to_string (_SLang_Token_Type *tok)
-{
-   char *s;
-   static char numbuf [32];
-   unsigned char type;
-   s = NULL;
-
-   if (tok != NULL) type = tok->type;
-   else type = 0;
-
-   switch (type)
-     {
-      case 0:
-	s = "??";
-	break;
-
-      case CHAR_TOKEN:
-      case SHORT_TOKEN:
-      case INT_TOKEN:
-      case LONG_TOKEN:
-	s = numbuf;
-	sprintf (s, "%ld", tok->v.long_val);
-	break;
-
-      case UCHAR_TOKEN:
-      case USHORT_TOKEN:
-      case UINT_TOKEN:
-      case ULONG_TOKEN:
-	s = numbuf;
-	sprintf (s, "%lu", (unsigned long)tok->v.long_val);
-	break;
-
-      case OBRACKET_TOKEN: s = "["; break;
-      case CBRACKET_TOKEN: s = "]"; break;
-      case OPAREN_TOKEN: s = "("; break;
-      case CPAREN_TOKEN: s = ")"; break;
-      case OBRACE_TOKEN: s = "{"; break;
-      case CBRACE_TOKEN: s = "}"; break;
-      case DEREF_TOKEN: s = "@"; break;
-      case POUND_TOKEN: s = "#"; break;
-      case COMMA_TOKEN: s = ","; break;
-      case SEMICOLON_TOKEN: s = ";"; break;
-      case COLON_TOKEN: s = ":"; break;
-
-#if SLANG_HAS_FLOAT
-      case FLOAT_TOKEN:
-      case DOUBLE_TOKEN:
-      case COMPLEX_TOKEN:
-#endif
-      case IDENT_TOKEN:
-	if ((tok->free_sval_flag == 0) || (tok->num_refs == 0))
-	  break;
-	/* drop */
-      default:
-	s = tok->v.s_val;
-	break;
-     }
-
-   if (s == NULL)
-     {
-	s = numbuf;
-	sprintf (s, "(0x%02X)", type);
-     }
-
-   return s;
-}
-
-static char *make_line_file_error (char *buf, unsigned int buflen,
-				   _SLang_Token_Type *tok, char *dsc, int line, char *file)
-{
-#if _SLANG_HAS_DEBUG_CODE
-   if (tok != NULL) line = tok->line_number;
-#endif
-   if (file == NULL) file = "??";
-
-   (void) _SLsnprintf (buf, buflen, "%s: found '%s', line %d, file: %s",
-		       dsc, map_token_to_string (tok), line, file);
-
-   return buf;
-}
-
-void _SLparse_error(char *str, _SLang_Token_Type *tok, int flag)
-{
-   char buf [1024];
-
-   if (str == NULL)
-     str = "Parse Error";
-
-   make_line_file_error (buf, sizeof (buf), tok, str, LLT->line_num, (char *) LLT->name);
-
-   if ((flag == 0) && SLang_Error)
-     return;
-
-   SLang_verror (SL_SYNTAX_ERROR, "%s", buf);
-}
-
-static void do_line_file_error (int line, char *file)
-{
-   SLang_verror (SL_SYNTAX_ERROR,
-		 "called from line %d, file: %s", line, file);
-}
-
-#define ALPHA_CHAR 	1
-#define DIGIT_CHAR	2
-#define EXCL_CHAR 	3
-#define SEP_CHAR	4
-#define OP_CHAR		5
-#define DOT_CHAR	6
-#define BOLDOT_CHAR	7
-#define DQUOTE_CHAR	8
-#define QUOTE_CHAR	9
-#define COMMENT_CHAR	10
-#define NL_CHAR		11
-#define BAD_CHAR	12
-#define WHITE_CHAR	13
-
-#define CHAR_EOF	255
-
-#define CHAR_CLASS(c)	(Char_Type_Table[(c)][0])
-#define CHAR_DATA(c)	(Char_Type_Table[(c)][1])
-
-/* In this table, if a single character can represent an operator, e.g.,
- * '&' (BAND_TOKEN), then it must be placed before multiple-character
- * operators that begin with the same character, e.g., "&=".  See
- * get_op_token to see how this is exploited.
- *
- * The third character null terminates the operator string.  This is for
- * the token structure.
- */
-static char Operators [29][4] =
-{
-#define OFS_EXCL	0
-     {'!',	'=',	0, NE_TOKEN},
-#define OFS_POUND	1
-     {'#',	0,	0, POUND_TOKEN},
-#define OFS_BAND	2
-     {'&',	0,	0, BAND_TOKEN},
-     {'&',	'&',	0, EOF_TOKEN},
-     {'&',	'=',	0, BANDEQS_TOKEN},
-#define OFS_STAR	5
-     {'*',	0,	0, TIMES_TOKEN},
-     {'*',	'=',	0, TIMESEQS_TOKEN},
-#define OFS_PLUS	7
-     {'+',	0,	0, ADD_TOKEN},
-     {'+',	'+',	0, PLUSPLUS_TOKEN},
-     {'+',	'=',	0, PLUSEQS_TOKEN},
-#define OFS_MINUS	10
-     {'-',	0,	0, SUB_TOKEN},
-     {'-',	'-',	0, MINUSMINUS_TOKEN},
-     {'-',	'=',	0, MINUSEQS_TOKEN},
-     {'-',	'>',	0, NAMESPACE_TOKEN},
-#define OFS_DIV		14
-     {'/',	0,	0, DIV_TOKEN},
-     {'/',	'=',	0, DIVEQS_TOKEN},
-#define OFS_LT		16
-     {'<',	0,	0, LT_TOKEN},
-     {'<',	'=',	0, LE_TOKEN},
-#define OFS_EQS		18
-     {'=',	0,	0, ASSIGN_TOKEN},
-     {'=',	'=',	0, EQ_TOKEN},
-#define OFS_GT		20
-     {'>',	0,	0, GT_TOKEN},
-     {'>',	'=',	0, GE_TOKEN},
-#define OFS_AT		22
-     {'@',	0,	0, DEREF_TOKEN},
-#define OFS_POW		23
-     {'^',	0,	0, POW_TOKEN},
-#define OFS_BOR		24
-     {'|',	0,	0, BOR_TOKEN},
-     {'|',	'|',	0, EOF_TOKEN},
-     {'|',	'=',	0, BOREQS_TOKEN},
-#define OFS_BNOT	27
-     {'~',	0,	0, BNOT_TOKEN},
-     {	0,	0,	0, EOF_TOKEN}
-};
-
-static unsigned char Char_Type_Table[256][2] =
-{
- { NL_CHAR, 0 },	/* 0x0 */   { BAD_CHAR, 0 },	/* 0x1 */
- { BAD_CHAR, 0 },	/* 0x2 */   { BAD_CHAR, 0 },	/* 0x3 */
- { BAD_CHAR, 0 },	/* 0x4 */   { BAD_CHAR, 0 },	/* 0x5 */
- { BAD_CHAR, 0 },	/* 0x6 */   { BAD_CHAR, 0 },	/* 0x7 */
- { WHITE_CHAR, 0 },	/* 0x8 */   { WHITE_CHAR, 0 },	/* 0x9 */
- { NL_CHAR, 0 },	/* \n */   { WHITE_CHAR, 0 },	/* 0xb */
- { WHITE_CHAR, 0 },	/* 0xc */   { WHITE_CHAR, 0 },	/* \r */
- { BAD_CHAR, 0 },	/* 0xe */   { BAD_CHAR, 0 },	/* 0xf */
- { BAD_CHAR, 0 },	/* 0x10 */  { BAD_CHAR, 0 },	/* 0x11 */
- { BAD_CHAR, 0 },	/* 0x12 */  { BAD_CHAR, 0 },	/* 0x13 */
- { BAD_CHAR, 0 },	/* 0x14 */  { BAD_CHAR, 0 },	/* 0x15 */
- { BAD_CHAR, 0 },	/* 0x16 */  { BAD_CHAR, 0 },	/* 0x17 */
- { BAD_CHAR, 0 },	/* 0x18 */  { BAD_CHAR, 0 },	/* 0x19 */
- { BAD_CHAR, 0 },	/* 0x1a */  { BAD_CHAR, 0 },	/* 0x1b */
- { BAD_CHAR, 0 },	/* 0x1c */  { BAD_CHAR, 0 },	/* 0x1d */
- { BAD_CHAR, 0 },	/* 0x1e */  { BAD_CHAR, 0 },	/* 0x1f */
- { WHITE_CHAR, 0 },	/* 0x20 */  { EXCL_CHAR, OFS_EXCL },	/* ! */
- { DQUOTE_CHAR, 0 },	/* " */	    { OP_CHAR, OFS_POUND },	/* # */
- { ALPHA_CHAR, 0 },	/* $ */	    { NL_CHAR, 0 },/* % */
- { OP_CHAR, OFS_BAND },	/* & */	    { QUOTE_CHAR, 0 },	/* ' */
- { SEP_CHAR, OPAREN_TOKEN },	/* ( */	    { SEP_CHAR, CPAREN_TOKEN },	/* ) */
- { OP_CHAR, OFS_STAR },	/* * */	    { OP_CHAR, OFS_PLUS},	/* + */
- { SEP_CHAR, COMMA_TOKEN },	/* , */	    { OP_CHAR, OFS_MINUS },	/* - */
- { DOT_CHAR, 0 },	/* . */	    { OP_CHAR, OFS_DIV },	/* / */
- { DIGIT_CHAR, 0 },	/* 0 */	    { DIGIT_CHAR, 0 },	/* 1 */
- { DIGIT_CHAR, 0 },	/* 2 */	    { DIGIT_CHAR, 0 },	/* 3 */
- { DIGIT_CHAR, 0 },	/* 4 */	    { DIGIT_CHAR, 0 },	/* 5 */
- { DIGIT_CHAR, 0 },	/* 6 */	    { DIGIT_CHAR, 0 },	/* 7 */
- { DIGIT_CHAR, 0 },	/* 8 */	    { DIGIT_CHAR, 0 },	/* 9 */
- { SEP_CHAR, COLON_TOKEN },	/* : */	    { SEP_CHAR, SEMICOLON_TOKEN },	/* ; */
- { OP_CHAR, OFS_LT },	/* < */	    { OP_CHAR, OFS_EQS },	/* = */
- { OP_CHAR, OFS_GT },	/* > */	    { BAD_CHAR, 0 },	/* ? */
- { OP_CHAR, OFS_AT},	/* @ */	    { ALPHA_CHAR, 0 },	/* A */
- { ALPHA_CHAR, 0 },	/* B */	    { ALPHA_CHAR, 0 },	/* C */
- { ALPHA_CHAR, 0 },	/* D */	    { ALPHA_CHAR, 0 },	/* E */
- { ALPHA_CHAR, 0 },	/* F */	    { ALPHA_CHAR, 0 },	/* G */
- { ALPHA_CHAR, 0 },	/* H */	    { ALPHA_CHAR, 0 },	/* I */
- { ALPHA_CHAR, 0 },	/* J */	    { ALPHA_CHAR, 0 },	/* K */
- { ALPHA_CHAR, 0 },	/* L */	    { ALPHA_CHAR, 0 },	/* M */
- { ALPHA_CHAR, 0 },	/* N */	    { ALPHA_CHAR, 0 },	/* O */
- { ALPHA_CHAR, 0 },	/* P */	    { ALPHA_CHAR, 0 },	/* Q */
- { ALPHA_CHAR, 0 },	/* R */	    { ALPHA_CHAR, 0 },	/* S */
- { ALPHA_CHAR, 0 },	/* T */	    { ALPHA_CHAR, 0 },	/* U */
- { ALPHA_CHAR, 0 },	/* V */	    { ALPHA_CHAR, 0 },	/* W */
- { ALPHA_CHAR, 0 },	/* X */	    { ALPHA_CHAR, 0 },	/* Y */
- { ALPHA_CHAR, 0 },	/* Z */	    { SEP_CHAR, OBRACKET_TOKEN },	/* [ */
- { BAD_CHAR, 0 },	/* \ */	    { SEP_CHAR, CBRACKET_TOKEN },	/* ] */
- { OP_CHAR, OFS_POW },	/* ^ */	    { ALPHA_CHAR, 0 },	/* _ */
- { BAD_CHAR, 0 },	/* ` */	    { ALPHA_CHAR, 0 },	/* a */
- { ALPHA_CHAR, 0 },	/* b */	    { ALPHA_CHAR, 0 },	/* c */
- { ALPHA_CHAR, 0 },	/* d */	    { ALPHA_CHAR, 0 },	/* e */
- { ALPHA_CHAR, 0 },	/* f */	    { ALPHA_CHAR, 0 },	/* g */
- { ALPHA_CHAR, 0 },	/* h */	    { ALPHA_CHAR, 0 },	/* i */
- { ALPHA_CHAR, 0 },	/* j */	    { ALPHA_CHAR, 0 },	/* k */
- { ALPHA_CHAR, 0 },	/* l */	    { ALPHA_CHAR, 0 },	/* m */
- { ALPHA_CHAR, 0 },	/* n */	    { ALPHA_CHAR, 0 },	/* o */
- { ALPHA_CHAR, 0 },	/* p */	    { ALPHA_CHAR, 0 },	/* q */
- { ALPHA_CHAR, 0 },	/* r */	    { ALPHA_CHAR, 0 },	/* s */
- { ALPHA_CHAR, 0 },	/* t */	    { ALPHA_CHAR, 0 },	/* u */
- { ALPHA_CHAR, 0 },	/* v */	    { ALPHA_CHAR, 0 },	/* w */
- { ALPHA_CHAR, 0 },	/* x */	    { ALPHA_CHAR, 0 },	/* y */
- { ALPHA_CHAR, 0 },	/* z */	    { SEP_CHAR, OBRACE_TOKEN },	/* { */
- { OP_CHAR, OFS_BOR },	/* | */	    { SEP_CHAR, CBRACE_TOKEN },	/* } */
- { OP_CHAR, OFS_BNOT },	/* ~ */	    { BAD_CHAR, 0 },	/* 0x7f */
-   
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
- { ALPHA_CHAR, 0 },	/* � */	    { ALPHA_CHAR, 0 },	/* � */
-};
-
-int _SLcheck_identifier_syntax (char *name)
-{
-   unsigned char *p;
-   
-   p = (unsigned char *) name;
-   if (ALPHA_CHAR == Char_Type_Table[*p][0]) while (1)
-     {
-	unsigned ch;
-	unsigned char type;
-
-	ch = *++p;
-
-	type = Char_Type_Table [ch][0];
-	if ((type != ALPHA_CHAR) && (type != DIGIT_CHAR))
-	  {
-	     if (ch == 0)
-	       return 0;
-	     break;
-	  }
-     }
-   
-   SLang_verror (SL_SYNTAX_ERROR, 
-		 "Name %s contains an illegal character", name);
-   return -1;
-}
-
-static unsigned char prep_get_char (void)
-{
-   register unsigned char ch;
-
-   if (0 != (ch = *Input_Line_Pointer++))
-     return ch;
-
-   Input_Line_Pointer--;
-   return 0;
-}
-
-static void unget_prep_char (unsigned char ch)
-{
-   if ((Input_Line_Pointer != Input_Line)
-       && (ch != 0))
-     Input_Line_Pointer--;
-   /* *Input_Line_Pointer = ch; -- Do not modify the Input_Line */
-}
-
-#include "keywhash.c"
-
-static int get_ident_token (_SLang_Token_Type *tok, unsigned char *s, unsigned int len)
-{
-   unsigned char ch;
-   unsigned char type;
-   Keyword_Table_Type *table;
-
-   while (1)
-     {
-	ch = prep_get_char ();
-	type = CHAR_CLASS (ch);
-	if ((type != ALPHA_CHAR) && (type != DIGIT_CHAR))
-	  {
-	     unget_prep_char (ch);
-	     break;
-	  }
-	s [len++] = ch;
-     }
-
-   s[len] = 0;
-
-   /* check if keyword */
-   table = is_keyword ((char *) s, len);
-   if (table != NULL)
-     {
-	tok->v.s_val = table->name;
-	return (tok->type = table->type);
-     }
-
-   tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
-   tok->free_sval_flag = 1;
-   return (tok->type = IDENT_TOKEN);
-}
-
-static int get_number_token (_SLang_Token_Type *tok, unsigned char *s, unsigned int len)
-{
-   unsigned char ch;
-   unsigned char type;
-
-   /* Look for pattern  [0-9.xX]*([eE][-+]?[digits])?[ijfhul]? */
-   while (1)
-     {
-	ch = prep_get_char ();
-
-	type = CHAR_CLASS (ch);
-	if ((type != DIGIT_CHAR) && (type != DOT_CHAR))
-	  {
-	     if ((ch != 'x') && (ch != 'X'))
-	       break;
-	     /* It must be hex */
-	     do
-	       {
-		  if (len == (MAX_TOKEN_LEN - 1))
-		    goto too_long_return_error;
-
-		  s[len++] = ch;
-		  ch = prep_get_char ();
-		  type = CHAR_CLASS (ch);
-	       }
-	     while ((type == DIGIT_CHAR) || (type == ALPHA_CHAR));
-	     break;
-	  }
-	if (len == (MAX_TOKEN_LEN - 1))
-	  goto too_long_return_error;
-	s [len++] = ch;
-     }
-
-   /* At this point, type and ch are synchronized */
-
-   if ((ch == 'e') || (ch == 'E'))
-     {
-	if (len == (MAX_TOKEN_LEN - 1))
-	  goto too_long_return_error;
-	s[len++] = ch;
-	ch = prep_get_char ();
-	if ((ch == '+') || (ch == '-'))
-	  {
-	     if (len == (MAX_TOKEN_LEN - 1))
-	       goto too_long_return_error;
-	     s[len++] = ch;
-	     ch = prep_get_char ();
-	  }
-
-	while (DIGIT_CHAR == (type = CHAR_CLASS(ch)))
-	  {
-	     if (len == (MAX_TOKEN_LEN - 1))
-	       goto too_long_return_error;
-	     s[len++] = ch;
-	     ch = prep_get_char ();
-	  }
-     }
-
-   while (ALPHA_CHAR == type)
-     {
-	if (len == (MAX_TOKEN_LEN - 1))
-	  goto too_long_return_error;
-	s[len++] = ch;
-	ch = prep_get_char ();
-	type = CHAR_CLASS(ch);
-     }
-
-   unget_prep_char (ch);
-   s[len] = 0;
-
-   switch (SLang_guess_type ((char *) s))
-     {
-      default:
-	tok->v.s_val = (char *) s;
-	_SLparse_error ("Not a number", tok, 0);
-	return (tok->type = EOF_TOKEN);
-
-#if SLANG_HAS_FLOAT
-      case SLANG_FLOAT_TYPE:
-	tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
-	tok->free_sval_flag = 1;
-	return (tok->type = FLOAT_TOKEN);
-
-      case SLANG_DOUBLE_TYPE:
-	tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
-	tok->free_sval_flag = 1;
-	return (tok->type = DOUBLE_TOKEN);
-#endif
-#if SLANG_HAS_COMPLEX
-      case SLANG_COMPLEX_TYPE:
-	tok->v.s_val = _SLstring_make_hashed_string ((char *)s, len, &tok->hash);
-	tok->free_sval_flag = 1;
-	return (tok->type = COMPLEX_TOKEN);
-#endif
-      case SLANG_CHAR_TYPE:
-	tok->v.long_val = (char)SLatol (s);
-	return tok->type = CHAR_TOKEN;
-      case SLANG_UCHAR_TYPE:
-	tok->v.long_val = (unsigned char)SLatol (s);
-	return tok->type = UCHAR_TOKEN;
-      case SLANG_SHORT_TYPE:
-	tok->v.long_val = (short)SLatol (s);
-	return tok->type = SHORT_TOKEN;
-      case SLANG_USHORT_TYPE:
-	tok->v.long_val = (unsigned short)SLatoul (s);
-	return tok->type = USHORT_TOKEN;
-      case SLANG_INT_TYPE:
-	tok->v.long_val = (int)SLatol (s);
-	return tok->type = INT_TOKEN;
-      case SLANG_UINT_TYPE:
-	tok->v.long_val = (unsigned int)SLatoul (s);
-	return tok->type = UINT_TOKEN;
-      case SLANG_LONG_TYPE:
-	tok->v.long_val = SLatol (s);
-	return tok->type = LONG_TOKEN;
-      case SLANG_ULONG_TYPE:
-	tok->v.long_val = SLatoul (s);
-	return tok->type = ULONG_TOKEN;
-     }
-
-   too_long_return_error:
-   _SLparse_error ("Number too long for buffer", NULL, 0);
-   return (tok->type == EOF_TOKEN);
-}
-
-static int get_op_token (_SLang_Token_Type *tok, char ch)
-{
-   unsigned int offset;
-   char second_char;
-   unsigned char type;
-   char *name;
-
-   /* operators are: + - / * ++ -- += -= = == != > < >= <= | etc..
-    * These lex to the longest valid operator token.
-    */
-
-   offset = CHAR_DATA((unsigned char) ch);
-   if (0 == Operators [offset][1])
-     {
-	name = Operators [offset];
-	type = name [3];
-     }
-   else
-     {
-	type = EOF_TOKEN;
-	name = NULL;
-     }
-
-   second_char = prep_get_char ();
-   do
-     {
-	if (second_char == Operators[offset][1])
-	  {
-	     name = Operators [offset];
-	     type = name [3];
-	     break;
-	  }
-	offset++;
-     }
-   while (ch == Operators[offset][0]);
-
-   tok->type = type;
-
-   if (type == EOF_TOKEN)
-     {
-	_SLparse_error ("Operator not supported", NULL, 0);
-	return type;
-     }
-
-   tok->v.s_val = name;
-
-   if (name[1] == 0)
-     unget_prep_char (second_char);
-
-   return type;
-}
-
-/* If this returns non-zero, then it is a binary string */
-static int expand_escaped_string (register char *s,
-				  register char *t, register char *tmax,
-				  unsigned int *lenp)
-{
-   char *s0;
-   int is_binary = 0;
-   char ch;
-
-   s0 = s;
-   while (t < tmax)
-     {
-	ch = *t++;
-	if (ch == '\\')
-	  {
-	     t = _SLexpand_escaped_char (t, &ch);
-	     if (ch == 0) is_binary = 1;
-	  }
-	*s++ = ch;
-     }
-   *s = 0;
-
-   *lenp = (unsigned char) (s - s0);
-   return is_binary;
-}
-
-static int get_string_token (_SLang_Token_Type *tok, unsigned char quote_char,
-			     unsigned char *s)
-{
-   unsigned char ch;
-   unsigned int len = 0;
-   int has_quote = 0;
-   int is_binary;
-
-   while (1)
-     {
-	ch = prep_get_char ();
-	if (ch == 0)
-	  {
-	     _SLparse_error("Expecting quote-character", NULL, 0);
-	     return (tok->type = EOF_TOKEN);
-	  }
-	if (ch == quote_char) break;
-
-	s[len++] = ch;
-
-	if (len == (MAX_TOKEN_LEN - 1))
-	  {
-	     _SLparse_error ("String too long for buffer", NULL, 0);
-	     return (tok->type == EOF_TOKEN);
-	  }
-
-	if (ch == '\\')
-	  {
-	     has_quote = 1;
-	     ch = prep_get_char ();
-	     s[len++] = ch;
-	  }
-     }
-
-   s[len] = 0;
-
-   if (has_quote)
-     is_binary = expand_escaped_string ((char *) s, (char *)s, (char *)s + len, &len);
-   else is_binary = 0;
-
-   if ('"' == quote_char)
-     {
-	tok->free_sval_flag = 1;
-	if (is_binary)
-	  {
-	     tok->v.b_val = SLbstring_create (s, len);
-	     return tok->type = BSTRING_TOKEN;
-	  }
-	else
-	  {
-	     tok->v.s_val = _SLstring_make_hashed_string ((char *)s,
-							  len,
-							  &tok->hash);
-	     tok->free_sval_flag = 1;
-	     return (tok->type = STRING_TOKEN);
-	  }
-     }
-
-   /* else single character */
-   if (s[1] != 0)
-     {
-	_SLparse_error("Single char expected", NULL, 0);
-	return (tok->type = EOF_TOKEN);
-     }
-
-   tok->v.long_val = s[0];
-   return (tok->type = UCHAR_TOKEN);
-}
-
-static int extract_token (_SLang_Token_Type *tok, unsigned char ch, unsigned char t)
-{
-   unsigned char s [MAX_TOKEN_LEN];
-   unsigned int slen;
-
-   s[0] = (char) ch;
-   slen = 1;
-
-   switch (t)
-     {
-      case ALPHA_CHAR:
-	return get_ident_token (tok, s, slen);
-
-      case OP_CHAR:
-	return get_op_token (tok, ch);
-
-      case DIGIT_CHAR:
-	return get_number_token (tok, s, slen);
-
-      case EXCL_CHAR:
-	ch = prep_get_char ();
-	s [slen++] = ch;
-	t = CHAR_CLASS(ch);
-	if (t == ALPHA_CHAR) return get_ident_token (tok, s, slen);
-	if (t == OP_CHAR)
-	  {
-	     unget_prep_char (ch);
-	     return get_op_token (tok, '!');
-	  }
-	_SLparse_error("Misplaced !", NULL, 0);
-	return -1;
-
-      case DOT_CHAR:
-	ch = prep_get_char ();
-	if (DIGIT_CHAR == CHAR_CLASS(ch))
-	  {
-	     s [slen++] = ch;
-	     return get_number_token (tok, s, slen);
-	  }
-	unget_prep_char (ch);
-	return (tok->type = DOT_TOKEN);
-
-      case SEP_CHAR:
-	return (tok->type = CHAR_DATA(ch));
-
-      case DQUOTE_CHAR:
-      case QUOTE_CHAR:
-	return get_string_token (tok, ch, s);
-
-      default:
-	_SLparse_error("Invalid character", NULL, 0);
-	return (tok->type = EOF_TOKEN);
-     }
-}
-
-int _SLget_rpn_token (_SLang_Token_Type *tok)
-{
-   unsigned char ch;
-
-   tok->v.s_val = "??";
-   while ((ch = *Input_Line_Pointer) != 0)
-     {
-	unsigned char t;
-
-	Input_Line_Pointer++;
-	if (WHITE_CHAR == (t = CHAR_CLASS(ch)))
-	  continue;
-
-	if (NL_CHAR == t)
-	  break;
-
-	return extract_token (tok, ch, t);
-     }
-   Input_Line_Pointer = Empty_Line;
-   return EOF_TOKEN;
-}
-
-int _SLget_token (_SLang_Token_Type *tok)
-{
-   unsigned char ch;
-   unsigned char t;
-
-   tok->num_refs = 1;
-   tok->free_sval_flag = 0;
-   tok->v.s_val = "??";
-#if _SLANG_HAS_DEBUG_CODE
-   tok->line_number = LLT->line_num;
-#endif
-   if (SLang_Error || (Input_Line == NULL))
-     return (tok->type = EOF_TOKEN);
-
-   while (1)
-     {
-	ch = *Input_Line_Pointer++;
-	if (WHITE_CHAR == (t = CHAR_CLASS (ch)))
-	  continue;
-
-	if (t != NL_CHAR)
-	  return extract_token (tok, ch, t);
-
-	do
-	  {
-	     LLT->line_num++;
-#if _SLANG_HAS_DEBUG_CODE
-	     tok->line_number++;
-#endif
-	     Input_Line = LLT->read(LLT);
-	     if ((NULL == Input_Line) || SLang_Error)
-	       {
-		  Input_Line_Pointer = Input_Line = NULL;
-		  return (tok->type = EOF_TOKEN);
-	       }
-	  }
-	while (0 == SLprep_line_ok(Input_Line, This_SLpp));
-
-	Input_Line_Pointer = Input_Line;
-	if (*Input_Line_Pointer == '.')
-	  {
-	     Input_Line_Pointer++;
-	     return tok->type = RPN_TOKEN;
-	  }
-     }
-}
-
-static int prep_exists_function (char *line, char comment)
-{
-   char buf[MAX_FILE_LINE_LEN], *b, *bmax;
-   unsigned char ch;
-
-   bmax = buf + (sizeof (buf) - 1);
-
-   while (1)
-     {
-	/* skip whitespace */
-	while ((ch = (unsigned char) *line),
-	       ch && (ch != '\n') && (ch <= ' '))
-	  line++;
-
-	if ((ch <= '\n')
-	    || (ch == (unsigned char) comment)) break;
-
-	b = buf;
-	while ((ch = (unsigned char) *line) > ' ')
-	  {
-	     if (b < bmax) *b++ = (char) ch;
-	     line++;
-	  }
-	*b = 0;
-
-	if (SLang_is_defined (buf))
-	  return 1;
-     }
-
-   return 0;
-}
-
-static int prep_eval_expr (char *expr)
-{
-   int ret;
-
-   if (0 != SLang_load_string (expr))
-     return -1;
-   if (-1 == SLang_pop_integer (&ret))
-     return -1;
-   return (ret != 0);
-}
-
-
-int SLang_load_object (SLang_Load_Type *x)
-{
-   SLPreprocess_Type this_pp;
-   SLPreprocess_Type *save_this_pp;
-   SLang_Load_Type *save_llt;
-   char *save_input_line, *save_input_line_ptr;
-#if _SLANG_HAS_DEBUG_CODE
-   int save_compile_line_num_info;
-#endif
-   int save_auto_declare_variables;
-
-   if (SLprep_exists_hook == NULL)
-     SLprep_exists_hook = prep_exists_function;
-
-   if (_SLprep_eval_hook == NULL)
-     _SLprep_eval_hook = prep_eval_expr;
-
-   if (-1 == SLprep_open_prep (&this_pp)) return -1;
-
-   if (-1 == _SLcompile_push_context (x))
-     return -1;
-
-#if _SLANG_HAS_DEBUG_CODE
-   save_compile_line_num_info = _SLang_Compile_Line_Num_Info;
-#endif
-   save_this_pp = This_SLpp;
-   save_input_line = Input_Line;
-   save_input_line_ptr = Input_Line_Pointer;
-   save_llt = LLT;
-   save_auto_declare_variables = _SLang_Auto_Declare_Globals;
-
-   This_SLpp = &this_pp;
-   Input_Line_Pointer = Input_Line = Empty_Line;
-   LLT = x;
-
-   x->line_num = 0;
-   x->parse_level = 0;
-   _SLang_Auto_Declare_Globals = x->auto_declare_globals;
-
-#if _SLANG_HAS_DEBUG_CODE
-   _SLang_Compile_Line_Num_Info = Default_Compile_Line_Num_Info;
-#endif
-
-   _SLparse_start (x);
-   if (SLang_Error)
-     do_line_file_error (x->line_num, x->name);
-
-   _SLang_Auto_Declare_Globals = save_auto_declare_variables;
-
-   if (SLang_Error) SLang_restart (0);
-
-   (void) _SLcompile_pop_context ();
-
-   Input_Line = save_input_line;
-   Input_Line_Pointer = save_input_line_ptr;
-   LLT = save_llt;
-   This_SLpp = save_this_pp;
-
-#if _SLANG_HAS_DEBUG_CODE
-   _SLang_Compile_Line_Num_Info = save_compile_line_num_info;
-#endif
-
-   if (SLang_Error) return -1;
-   return 0;
-}
-
-SLang_Load_Type *SLallocate_load_type (char *name)
-{
-   SLang_Load_Type *x;
-
-   if (NULL == (x = (SLang_Load_Type *)SLmalloc (sizeof (SLang_Load_Type))))
-     return NULL;
-   memset ((char *) x, 0, sizeof (SLang_Load_Type));
-
-   if (name == NULL) name = "";
-
-   x->name = SLang_create_slstring (name);
-   if (x->name == NULL)
-     {
-	SLfree ((char *) x);
-	return NULL;
-     }
-   return x;
-}
-
-void SLdeallocate_load_type (SLang_Load_Type *x)
-{
-   if (x != NULL)
-     {
-	SLang_free_slstring (x->name);
-	SLfree ((char *) x);
-     }
-}
-
-typedef struct
-{
-   char *string;
-   char *ptr;
-}
-String_Client_Data_Type;
-
-static char *read_from_string (SLang_Load_Type *x)
-{
-   String_Client_Data_Type *data;
-   char *s, *s1, ch;
-
-   data = (String_Client_Data_Type *)x->client_data;
-   s1 = s = data->ptr;
-
-   if (*s == 0)
-     return NULL;
-
-   while ((ch = *s) != 0)
-     {
-	s++;
-	if (ch == '\n')
-	  break;
-     }
-
-   data->ptr = s;
-   return s1;
-}
-
-int SLang_load_string (char *string)
-{
-   SLang_Load_Type *x;
-   String_Client_Data_Type data;
-   int ret;
-
-   if (string == NULL)
-     return -1;
-
-   /* Grab a private copy in case loading modifies string */
-   if (NULL == (string = SLang_create_slstring (string)))
-     return -1;
-
-   /* To avoid creating a static data space for every string loaded,
-    * all string objects will be regarded as identical.  So, identify
-    * all of them by ***string***
-    */
-   if (NULL == (x = SLallocate_load_type ("***string***")))
-     {
-	SLang_free_slstring (string);
-	return -1;
-     }
-
-   x->client_data = (VOID_STAR) &data;
-   x->read = read_from_string;
-
-   data.ptr = data.string = string;
-   if (-1 == (ret = SLang_load_object (x)))
-     SLang_verror (SLang_Error, "called from eval: %s", string);
-
-   SLang_free_slstring (string);
-   SLdeallocate_load_type (x);
-   return ret;
-}
-
-typedef struct
-{
-   char *buf;
-   FILE *fp;
-}
-File_Client_Data_Type;
-
-char *SLang_User_Prompt;
-static char *read_from_file (SLang_Load_Type *x)
-{
-   FILE *fp;
-   File_Client_Data_Type *c;
-
-   c = (File_Client_Data_Type *)x->client_data;
-   fp = c->fp;
-
-   if ((fp == stdin) && (SLang_User_Prompt != NULL))
-     {
-	fputs (SLang_User_Prompt, stdout);
-	fflush (stdout);
-     }
-
-   return fgets (c->buf, MAX_FILE_LINE_LEN, c->fp);
-}
-
-/* Note that file could be freed from Slang during run of this routine
- * so get it and store it !! (e.g., autoloading)
- */
-int (*SLang_Load_File_Hook) (char *);
-int SLang_load_file (char *f)
-{
-   File_Client_Data_Type client_data;
-   SLang_Load_Type *x;
-   char *name, *buf;
-   FILE *fp;
-
-   if (SLang_Load_File_Hook != NULL)
-     return (*SLang_Load_File_Hook) (f);
-
-   if (f == NULL) name = "<stdin>"; else name = f;
-
-   name = SLang_create_slstring (name);
-   if (name == NULL)
-     return -1;
-
-   if (NULL == (x = SLallocate_load_type (name)))
-     {
-	SLang_free_slstring (name);
-	return -1;
-     }
-
-   buf = NULL;
-
-   if (f != NULL)
-     fp = fopen (f, "r");
-   else
-     fp = stdin;
-
-   if (fp == NULL)
-     SLang_verror (SL_OBJ_NOPEN, "Unable to open %s", name);
-   else if (NULL != (buf = SLmalloc (MAX_FILE_LINE_LEN + 1)))
-     {
-	client_data.fp = fp;
-	client_data.buf = buf;
-	x->client_data = (VOID_STAR) &client_data;
-	x->read = read_from_file;
-
-	(void) SLang_load_object (x);
-     }
-
-   if ((fp != NULL) && (fp != stdin))
-     fclose (fp);
-
-   SLfree (buf);
-   SLang_free_slstring (name);
-   SLdeallocate_load_type (x);
-
-   if (SLang_Error)
-     return -1;
-
-   return 0;
-}
-
-int SLang_guess_type (char *t)
-{
-   char *p;
-   register char ch;
-   int modifier = 0;
-
-   if (*t == '-') t++;
-   p = t;
-
-#if SLANG_HAS_FLOAT
-   if (*p != '.')
-     {
-#endif
-	modifier = 0;
-	while ((*p >= '0') && (*p <= '9')) p++;
-	if (t == p) return (SLANG_STRING_TYPE);
-	if ((*p == 'x') && (p == t + 1))   /* 0x?? */
-	  {
-	     modifier |= 8;
-	     p++;
-	     while (ch = *p,
-		    ((ch >= '0') && (ch <= '9'))
-		    || (((ch | 0x20) >= 'a') && ((ch | 0x20) <= 'f'))) p++;
-	  }
-
-	/* Now look for UL, LU, UH, HU, L, H modifiers */
-	while ((ch = *p) != 0)
-	  {
-	     ch |= 0x20;
-	     if (ch == 'h') modifier |= 1;
-	     else if (ch == 'l') modifier |= 2;
-	     else if (ch == 'u') modifier |= 4;
-	     else break;
-	     p++;
-	  }
-	if ((1|2) == (modifier & (1|2)))	       /* hl present */
-	  return SLANG_STRING_TYPE;
-
-	if (ch == 0)
-	  {
-	     if ((modifier & 0x7) == 0) return SLANG_INT_TYPE;
-	     if (modifier & 4)
-	       {
-		  if (modifier & 1) return SLANG_USHORT_TYPE;
-		  if (modifier & 2) return SLANG_ULONG_TYPE;
-		  return SLANG_UINT_TYPE;
-	       }
-	     if (modifier & 1) return SLANG_SHORT_TYPE;
-	     if (modifier & 2) return SLANG_LONG_TYPE;
-	     return SLANG_INT_TYPE;
-	  }
-
-	if (modifier) return SLANG_STRING_TYPE;
-#if SLANG_HAS_FLOAT
-     }
-
-   /* now down to double case */
-   if (*p == '.')
-     {
-	p++;
-	while ((*p >= '0') && (*p <= '9')) p++;
-     }
-   if (*p == 0) return(SLANG_DOUBLE_TYPE);
-   if ((*p != 'e') && (*p != 'E'))
-     {
-# if SLANG_HAS_COMPLEX
-	if (((*p == 'i') || (*p == 'j'))
-	    && (p[1] == 0))
-	  return SLANG_COMPLEX_TYPE;
-# endif
-	if (((*p | 0x20) == 'f') && (p[1] == 0))
-	  return SLANG_FLOAT_TYPE;
-
-	return SLANG_STRING_TYPE;
-     }
-
-   p++;
-   if ((*p == '-') || (*p == '+')) p++;
-   while ((*p >= '0') && (*p <= '9')) p++;
-   if (*p != 0)
-     {
-# if SLANG_HAS_COMPLEX
-	if (((*p == 'i') || (*p == 'j'))
-	    && (p[1] == 0))
-	  return SLANG_COMPLEX_TYPE;
-# endif
-	if (((*p | 0x20) == 'f') && (p[1] == 0))
-	  return SLANG_FLOAT_TYPE;
-
-	return SLANG_STRING_TYPE;
-     }
-   return SLANG_DOUBLE_TYPE;
-#else
-   return SLANG_STRING_TYPE;
-#endif				       /* SLANG_HAS_FLOAT */
-}
-
-static int hex_atoul (unsigned char *s, unsigned long *ul)
-{
-   register unsigned char ch;
-   register unsigned long value;
-   register int base;
-
-   s++;				       /* skip the leading 0 */
-
-   /* look for 'x' which indicates hex */
-   if ((*s | 0x20) == 'x')
-     {
-	base = 16;
-	s++;
-	if (*s == 0)
-	  {
-	     SLang_Error = SL_SYNTAX_ERROR;
-	     return -1;
-	  }
-     }
-   else base = 8;
-
-   value = 0;
-   while ((ch = *s++) != 0)
-     {
-	char ch1 = ch | 0x20;
-	switch (ch1)
-	  {
-	   default:
-	     SLang_Error = SL_SYNTAX_ERROR;
-	     break;
-
-	   case 'u':
-	   case 'l':
-	   case 'h':
-	     *ul = value;
-	     return 0;
-
-	   case '8':
-	   case '9':
-	     if (base != 16) SLang_Error = SL_SYNTAX_ERROR;
-	     /* drop */
-	   case '0':
-	   case '1':
-	   case '2':
-	   case '3':
-	   case '4':
-	   case '5':
-	   case '6':
-	   case '7':
-	     ch1 -= '0';
-	     break;
-
-	   case 'a':
-	   case 'b':
-	   case 'c':
-	   case 'd':
-	   case 'e':
-	   case 'f':
-	     if (base != 16) SLang_Error = SL_SYNTAX_ERROR;
-	     ch1 = (ch1 - 'a') + 10;
-	     break;
-	  }
-	value = value * base + ch1;
-     }
-   *ul = value;
-   return 0;
-}
-
-/* Note: These routines do not check integer overflow.  I would use the C
- * library functions atol and atoul but some implementations check overflow
- * and some do not.  The following implementations provide a consistent
- * behavior.
- */
-unsigned long SLatoul (unsigned char *s)
-{
-   int sign;
-   unsigned long value;
-
-   if (*s == '-') sign = -1;
-   else
-     {
-	sign = 1;
-	if (*s == '+') s++;
-     }
-
-   if (*s == '0')
-     {
-	if (-1 == hex_atoul (s, &value))
-	  return (unsigned long) -1;
-     }
-   else
-     {
-	while (WHITE_CHAR == CHAR_CLASS(*s))
-	  s++;
-
-	value = 0;
-	while (DIGIT_CHAR == CHAR_CLASS(*s))
-	  {
-	     value = value * 10 + (unsigned long) (*s - '0');
-	     s++;
-	  }
-     }
-
-   if (sign == -1)
-     value = (unsigned long)-1L * value;
-
-   return value;
-}
-
-long SLatol (unsigned char *s)
-{
-   while (WHITE_CHAR == CHAR_CLASS(*s))
-     s++;
-
-   if (*s == '-')
-     {
-	long value = (long) SLatoul (s+1);
-	return -value;
-     }
-   return (long) SLatoul (s);
-}
-
-int SLatoi (unsigned char *s)
-{
-   return (int) SLatol (s);
-}
-
-static char *check_byte_compiled_token (char *buf)
-{
-   unsigned int len_lo, len_hi, len;
-
-   len_lo = (unsigned char) *Input_Line_Pointer++;
-   if ((len_lo < 32)
-       || ((len_hi = (unsigned char)*Input_Line_Pointer++) < 32)
-       || ((len = (len_lo - 32) | ((len_hi - 32) << 7)) >= MAX_TOKEN_LEN))
-     {
-	SLang_doerror ("Byte compiled file appears corrupt");
-	return NULL;
-     }
-
-   SLMEMCPY (buf, Input_Line_Pointer, len);
-   buf += len;
-   Input_Line_Pointer += len;
-   *buf = 0;
-   return buf;
-}
-
-void _SLcompile_byte_compiled (void)
-{
-   unsigned char type;
-   _SLang_Token_Type tok;
-   char buf[MAX_TOKEN_LEN];
-   char *ebuf;
-   unsigned int len;
-
-   memset ((char *) &tok, 0, sizeof (_SLang_Token_Type));
-
-   while (SLang_Error == 0)
-     {
-	top_of_switch:
-	type = (unsigned char) *Input_Line_Pointer++;
-	switch (type)
-	  {
-	   case '\n':
-	   case 0:
-	     if (NULL == (Input_Line = LLT->read(LLT)))
-	       {
-		  Input_Line_Pointer = Input_Line = NULL;
-		  return;
-	       }
-	     Input_Line_Pointer = Input_Line;
-	     goto top_of_switch;
-
-	   case LINE_NUM_TOKEN:
-	   case CHAR_TOKEN:
-	   case UCHAR_TOKEN:
-	   case SHORT_TOKEN:
-	   case USHORT_TOKEN:
-	   case INT_TOKEN:
-	   case UINT_TOKEN:
-	   case LONG_TOKEN:
-	   case ULONG_TOKEN:
-	     if (NULL == check_byte_compiled_token (buf))
-	       return;
-	     tok.v.long_val = atol (buf);
-	     break;
-
-	   case COMPLEX_TOKEN:
-	   case FLOAT_TOKEN:
-	   case DOUBLE_TOKEN:
-	     if (NULL == check_byte_compiled_token (buf))
-	       return;
-	     tok.v.s_val = buf;
-	     break;
-
-	   case ESC_STRING_TOKEN:
-	     if (NULL == (ebuf = check_byte_compiled_token (buf)))
-	       return;
-	     tok.v.s_val = buf;
-	     if (expand_escaped_string (buf, buf, ebuf, &len))
-	       {
-		  tok.hash = len;
-		  type = _BSTRING_TOKEN;
-	       }
-	     else
-	       {
-		  tok.hash = _SLstring_hash ((unsigned char *)buf, (unsigned char *)buf + len);
-		  type = STRING_TOKEN;
-	       }
-	     break;
-
-	   case TMP_TOKEN:
-	   case DEFINE_TOKEN:
-	   case DEFINE_STATIC_TOKEN:
-	   case DEFINE_PRIVATE_TOKEN:
-	   case DEFINE_PUBLIC_TOKEN:
-	   case DOT_TOKEN:
-	   case STRING_TOKEN:
-	   case IDENT_TOKEN:
-	   case _REF_TOKEN:
-	   case _DEREF_ASSIGN_TOKEN:
-	   case _SCALAR_ASSIGN_TOKEN:
-	   case _SCALAR_PLUSEQS_TOKEN:
-	   case _SCALAR_MINUSEQS_TOKEN:
-	   case _SCALAR_TIMESEQS_TOKEN:
-	   case _SCALAR_DIVEQS_TOKEN:
-	   case _SCALAR_BOREQS_TOKEN:
-	   case _SCALAR_BANDEQS_TOKEN:
-	   case _SCALAR_PLUSPLUS_TOKEN:
-	   case _SCALAR_POST_PLUSPLUS_TOKEN:
-	   case _SCALAR_MINUSMINUS_TOKEN:
-	   case _SCALAR_POST_MINUSMINUS_TOKEN:
-	   case _STRUCT_ASSIGN_TOKEN:
-	   case _STRUCT_PLUSEQS_TOKEN:
-	   case _STRUCT_MINUSEQS_TOKEN:
-	   case _STRUCT_TIMESEQS_TOKEN:
-	   case _STRUCT_DIVEQS_TOKEN:
-	   case _STRUCT_BOREQS_TOKEN:
-	   case _STRUCT_BANDEQS_TOKEN:
-	   case _STRUCT_POST_MINUSMINUS_TOKEN:
-	   case _STRUCT_MINUSMINUS_TOKEN:
-	   case _STRUCT_POST_PLUSPLUS_TOKEN:
-	   case _STRUCT_PLUSPLUS_TOKEN:
-	     if (NULL == (ebuf = check_byte_compiled_token (buf)))
-	       return;
-	     tok.v.s_val = buf;
-	     tok.hash = _SLstring_hash ((unsigned char *)buf, (unsigned char *)ebuf);
-	     break;
-
-	   default:
-	     break;
-	  }
-	tok.type = type;
-
-	(*_SLcompile_ptr) (&tok);
-     }
-}
-
-static int escape_string (unsigned char *s, unsigned char *smax,
-			  unsigned char *buf, unsigned char *buf_max,
-			  int *is_escaped)
-{
-   unsigned char ch;
-
-   *is_escaped = 0;
-   while (buf < buf_max)
-     {
-	if (s == smax)
-	  {
-	     *buf = 0;
-	     return 0;
-	  }
-
-	ch = *s++;
-	switch (ch)
-	  {
-	   default:
-	     *buf++ = ch;
-	     break;
-
-	   case 0:
-	     *buf++ = '\\';
-	     if (buf < buf_max) *buf++ = 'x';
-	     if (buf < buf_max) *buf++ = '0';
-	     if (buf < buf_max) *buf++ = '0';
-	     *is_escaped = 1;
-	     break; /* return 0; */
-
-	   case '\n':
-	     *buf++ = '\\';
-	     if (buf < buf_max) *buf++ = 'n';
-	     *is_escaped = 1;
-	     break;
-
-	   case '\r':
-	     *buf++ = '\\';
-	     if (buf < buf_max) *buf++ = 'r';
-	     *is_escaped = 1;
-	     break;
-
-	   case 0x1A:		       /* ^Z */
-	     *buf++ = '\\';
-	     if (buf < buf_max) *buf++ = 'x';
-	     if (buf < buf_max) *buf++ = '1';
-	     if (buf < buf_max) *buf++ = 'A';
-	     *is_escaped = 1;
-	     break;
-
-	   case '\\':
-	     *buf++ = ch;
-	     if (buf < buf_max) *buf++ = ch;
-	     *is_escaped = 1;
-	     break;
-	  }
-     }
-   _SLparse_error ("String too long to byte-compile", NULL, 0);
-   return -1;
-}
-
-static FILE *Byte_Compile_Fp;
-static unsigned int Byte_Compile_Line_Len;
-
-static int bytecomp_write_data (char *buf, unsigned int len)
-{
-   char *err = "Write Error";
-
-   if ((Byte_Compile_Line_Len + len + 1) >= MAX_FILE_LINE_LEN)
-     {
-	if (EOF == fputs ("\n", Byte_Compile_Fp))
-	  {
-	     SLang_doerror (err);
-	     return -1;
-	  }
-	Byte_Compile_Line_Len = 0;
-     }
-
-   if (EOF == fputs (buf, Byte_Compile_Fp))
-     {
-	SLang_doerror (err);
-	return -1;
-     }
-   Byte_Compile_Line_Len += len;
-   return 0;
-}
-
-static void byte_compile_token (_SLang_Token_Type *tok)
-{
-   unsigned char buf [MAX_TOKEN_LEN + 4], *buf_max;
-   unsigned int len;
-   char *b3;
-   int is_escaped;
-   unsigned char *s;
-
-   if (SLang_Error) return;
-
-   buf [0] = (unsigned char) tok->type;
-   buf [1] = 0;
-
-   buf_max = buf + sizeof(buf);
-   b3 = (char *) buf + 3;
-
-   switch (tok->type)
-     {
-      case LINE_NUM_TOKEN:
-      case CHAR_TOKEN:
-      case SHORT_TOKEN:
-      case INT_TOKEN:
-      case LONG_TOKEN:
-	sprintf (b3, "%ld", tok->v.long_val);
-	break;
-
-      case UCHAR_TOKEN:
-      case USHORT_TOKEN:
-      case UINT_TOKEN:
-      case ULONG_TOKEN:
-	sprintf (b3, "%lu", tok->v.long_val);
-	break;
-
-      case _BSTRING_TOKEN:
-	s = (unsigned char *) tok->v.s_val;
-	len = (unsigned int) tok->hash;
-
-	if (-1 == escape_string (s, s + len,
-				 (unsigned char *)b3, buf_max,
-				 &is_escaped))
-	    return;
-
-	buf[0] = ESC_STRING_TOKEN;
-	break;
-
-      case BSTRING_TOKEN:
-	if (NULL == (s = SLbstring_get_pointer (tok->v.b_val, &len)))
-	  return;
-
-	if (-1 == escape_string (s, s + len,
-				 (unsigned char *)b3, buf_max,
-				 &is_escaped))
-	    return;
-	buf[0] = ESC_STRING_TOKEN;
-	break;
-
-      case STRING_TOKEN:
-	s = (unsigned char *)tok->v.s_val;
-
-	if (-1 == escape_string (s, s + strlen ((char *)s),
-				 (unsigned char *)b3, buf_max,
-				 &is_escaped))
-	    return;
-
-	if (is_escaped)
-	  buf[0] = ESC_STRING_TOKEN;
-	break;
-
-	/* a _SCALAR_* token is attached to an identifier. */
-      case _DEREF_ASSIGN_TOKEN:
-      case _SCALAR_ASSIGN_TOKEN:
-      case _SCALAR_PLUSEQS_TOKEN:
-      case _SCALAR_MINUSEQS_TOKEN:
-      case _SCALAR_TIMESEQS_TOKEN:
-      case _SCALAR_DIVEQS_TOKEN:
-      case _SCALAR_BOREQS_TOKEN:
-      case _SCALAR_BANDEQS_TOKEN:
-      case _SCALAR_PLUSPLUS_TOKEN:
-      case _SCALAR_POST_PLUSPLUS_TOKEN:
-      case _SCALAR_MINUSMINUS_TOKEN:
-      case _SCALAR_POST_MINUSMINUS_TOKEN:
-      case DOT_TOKEN:
-      case TMP_TOKEN:
-      case DEFINE_TOKEN:
-      case DEFINE_STATIC_TOKEN:
-      case DEFINE_PRIVATE_TOKEN:
-      case DEFINE_PUBLIC_TOKEN:
-      case FLOAT_TOKEN:
-      case DOUBLE_TOKEN:
-      case COMPLEX_TOKEN:
-      case IDENT_TOKEN:
-      case _REF_TOKEN:
-      case _STRUCT_ASSIGN_TOKEN:
-      case _STRUCT_PLUSEQS_TOKEN:
-      case _STRUCT_MINUSEQS_TOKEN:
-      case _STRUCT_TIMESEQS_TOKEN:
-      case _STRUCT_DIVEQS_TOKEN:
-      case _STRUCT_BOREQS_TOKEN:
-      case _STRUCT_BANDEQS_TOKEN:
-      case _STRUCT_POST_MINUSMINUS_TOKEN:
-      case _STRUCT_MINUSMINUS_TOKEN:
-      case _STRUCT_POST_PLUSPLUS_TOKEN:
-      case _STRUCT_PLUSPLUS_TOKEN:
-	strcpy (b3, tok->v.s_val);
-	break;
-
-      default:
-	b3 = NULL;
-     }
-
-   if (b3 != NULL)
-     {
-	len = strlen (b3);
-	buf[1] = (unsigned char) ((len & 0x7F) + 32);
-	buf[2] = (unsigned char) (((len >> 7) & 0x7F) + 32);
-	len += 3;
-     }
-   else len = 1;
-
-   (void) bytecomp_write_data ((char *)buf, len);
-}
-
-int SLang_byte_compile_file (char *name, int method)
-{
-   char file [1024];
-
-   (void) method;
-   if (strlen (name) + 2 >= sizeof (file))
-     {
-	SLang_verror (SL_INVALID_PARM, "Filename too long");
-	return -1;
-     }
-   sprintf (file, "%sc", name);
-   if (NULL == (Byte_Compile_Fp = fopen (file, "w")))
-     {
-	SLang_verror(SL_OBJ_NOPEN, "%s: unable to open", file);
-	return -1;
-     }
-
-   Byte_Compile_Line_Len = 0;
-   if (-1 != bytecomp_write_data (".#", 2))
-     {
-	_SLcompile_ptr = byte_compile_token;
-	(void) SLang_load_file (name);
-	_SLcompile_ptr = _SLcompile;
-
-	(void) bytecomp_write_data ("\n", 1);
-     }
-
-   if (EOF == fclose (Byte_Compile_Fp))
-     SLang_doerror ("Write Error");
-
-   if (SLang_Error)
-     {
-	SLang_verror (0, "Error processing %s", name);
-	return -1;
-     }
-   return 0;
-}
-
-int SLang_generate_debug_info (int x)
-{
-   int y = Default_Compile_Line_Num_Info;
-   Default_Compile_Line_Num_Info = x;
-   return y;
-}
diff --git a/mdk-stage1/slang/sltypes.c b/mdk-stage1/slang/sltypes.c
deleted file mode 100644
index 05b8741b1..000000000
--- a/mdk-stage1/slang/sltypes.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/* Basic type operations for S-Lang */
-/* Copyright (c) 1992, 1996, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#if SLANG_HAS_FLOAT
-# include <math.h>
-#endif
-
-#define SL_APP_WANTS_FOREACH	       /* for String_Type */
-#include "slang.h"
-#include "_slang.h"
-
-int SLpop_string (char **s) /*{{{*/
-{
-   char *sls;
-
-   *s = NULL;
-
-   if (-1 == SLang_pop_slstring (&sls))
-     return -1;
-
-   if (NULL == (*s = SLmake_string (sls)))
-     {
-	SLang_free_slstring (sls);
-	return -1;
-     }
-
-   SLang_free_slstring (sls);
-   return 0;
-}
-
-/*}}}*/
-
-int SLang_pop_slstring (char **s) /*{{{*/
-{
-   return SLclass_pop_ptr_obj (SLANG_STRING_TYPE, (VOID_STAR *)s);
-}
-
-/*}}}*/
-
-/* if *data != 0, string should be freed upon use. */
-int SLang_pop_string(char **s, int *data) /*{{{*/
-{
-   if (SLpop_string (s))
-     return -1;
-
-   *data = 1;
-   return 0;
-}
-
-/*}}}*/
-
-int _SLang_push_slstring (char *s)
-{
-   if (0 == SLclass_push_ptr_obj (SLANG_STRING_TYPE, (VOID_STAR)s))
-     return 0;
-
-   SLang_free_slstring (s);
-   return -1;
-}
-
-int _SLpush_alloced_slstring (char *s, unsigned int len)
-{
-   if (NULL == (s = _SLcreate_via_alloced_slstring (s, len)))
-     return -1;
-   
-   return _SLang_push_slstring (s);
-}
-
-int SLang_push_string (char *t) /*{{{*/
-{
-   if (t == NULL)
-     return SLang_push_null ();
-
-   if (NULL == (t = SLang_create_slstring (t)))
-     return -1;
-
-   return _SLang_push_slstring (t);
-}
-
-/*}}}*/
-
-int _SLang_dup_and_push_slstring (char *s)
-{
-   if (NULL == (s = _SLstring_dup_slstring (s)))
-     return SLang_push_null ();
-
-   return _SLang_push_slstring (s);
-}
-
-
-/* This function _always_ frees the malloced string */
-int SLang_push_malloced_string (char *c) /*{{{*/
-{
-   int ret;
-
-   ret = SLang_push_string (c);
-   SLfree (c);
-
-   return ret;
-}
-
-/*}}}*/
-
-#if 0
-static int int_int_power (int a, int b)
-{
-   int r, s;
-
-   if (a == 0) return 0;
-   if (b < 0) return 0;
-   if (b == 0) return 1;
-
-   s = 1;
-   if (a < 0)
-     {
-	if ((b % 2) == 1) s = -1;
-	a = -a;
-     }
-
-   /* FIXME: Priority=low
-    * This needs optimized
-    */
-   r = 1;
-   while (b)
-     {
-	r = r * a;
-	b--;
-     }
-   return r * s;
-}
-#endif
-
-static int
-string_string_bin_op_result (int op, unsigned char a, unsigned char b,
-			     unsigned char *c)
-{
-   (void) a;
-   (void) b;
-   switch (op)
-     {
-      default:
-	return 0;
-
-      case SLANG_PLUS:
-	*c = SLANG_STRING_TYPE;
-	break;
-
-      case SLANG_GT:
-      case SLANG_GE:
-      case SLANG_LT:
-      case SLANG_LE:
-      case SLANG_EQ:
-      case SLANG_NE:
-	*c = SLANG_CHAR_TYPE;
-	break;
-     }
-   return 1;
-}
-
-static int
-string_string_bin_op (int op,
-		      unsigned char a_type, VOID_STAR ap, unsigned int na,
-		      unsigned char b_type, VOID_STAR bp, unsigned int nb,
-		      VOID_STAR cp)
-{
-   char *ic;
-   char **a, **b, **c;
-   unsigned int n, n_max;
-   unsigned int da, db;
-
-   (void) a_type;
-   (void) b_type;
-
-   if (na == 1) da = 0; else da = 1;
-   if (nb == 1) db = 0; else db = 1;
-
-   if (na > nb) n_max = na; else n_max = nb;
-
-   a = (char **) ap;
-   b = (char **) bp;
-   for (n = 0; n < n_max; n++)
-     {
-	if ((*a == NULL) || (*b == NULL))
-	  {
-	     SLang_verror (SL_VARIABLE_UNINITIALIZED, "String element[%u] not initialized for binary operation", n);
-	     return -1;
-	  }
-	a += da; b += db;
-     }
-
-   a = (char **) ap;
-   b = (char **) bp;
-   ic = (char *) cp;
-   c = NULL;
-
-   switch (op)
-     {
-      case SLANG_DIVIDE:
-      case SLANG_MINUS:
-      default:
-	return 0;
-
-       case SLANG_PLUS:
-	/* Concat */
-	c = (char **) cp;
-	for (n = 0; n < n_max; n++)
-	  {
-	     if (NULL == (c[n] = SLang_concat_slstrings (*a, *b)))
-	       goto return_error;
-
-	     a += da; b += db;
-	  }
-	break;
-
-      case SLANG_NE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (0 != strcmp (*a, *b));
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_GT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) > 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_GE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) >= 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_LT:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) < 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_LE:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) <= 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-      case SLANG_EQ:
-	for (n = 0; n < n_max; n++)
-	  {
-	     ic [n] = (strcmp (*a, *b) == 0);
-	     a += da;
-	     b += db;
-	  }
-	break;
-     }
-   return 1;
-
-   return_error:
-   if (c != NULL)
-     {
-	unsigned int nn;
-	for (nn = 0; nn < n; nn++)
-	  {
-	     SLang_free_slstring (c[nn]);
-	     c[nn] = NULL;
-	  }
-	for (nn = n; nn < n_max; nn++)
-	  c[nn] = NULL;
-     }
-   return -1;
-}
-
-static void string_destroy (unsigned char unused, VOID_STAR s)
-{
-   (void) unused;
-   SLang_free_slstring (*(char **) s);
-}
-
-static int string_push (unsigned char unused, VOID_STAR sptr)
-{
-   (void) unused;
-   return SLang_push_string (*(char **) sptr);
-}
-
-static int string_cmp (unsigned char unused, VOID_STAR ap, VOID_STAR bp, int *c)
-{
-   char *a, *b;
-   (void) unused;
-   
-   a = *(char **) ap;
-   b = *(char **) bp;
-   if (a != b)
-     {
-	if (a == NULL) *c = -1;
-	else if (b == NULL) *c = 1;
-	else *c = strcmp (a, b);
-	return 0;
-     }
-   *c = 0;
-   return 0;
-}
-
-static int string_to_int (unsigned char a_type, VOID_STAR ap, unsigned int na,
-			  unsigned char b_type, VOID_STAR bp)
-{
-   char **s;
-   unsigned int i;
-   int *b;
-
-   (void) a_type;
-   (void) b_type;
-
-   s = (char **) ap;
-   b = (int *) bp;
-   for (i = 0; i < na; i++)
-     {
-	if (s[i] == NULL) b[i] = 0;
-	else b[i] = s[i][0];
-     }
-   return 1;
-}
-
-struct _SLang_Foreach_Context_Type
-{
-   char *string;
-   unsigned int n;
-};
-
-static SLang_Foreach_Context_Type *
-string_foreach_open (unsigned char type, unsigned int num)
-{
-   char *s;
-   SLang_Foreach_Context_Type *c;
-
-   (void) type;
-   if (num != 0)
-     {
-	SLang_verror (SL_NOT_IMPLEMENTED,
-		      "'foreach using' form not supported by String_Type");
-	SLdo_pop_n (num + 1);
-	return NULL;
-     }
-   if (-1 == SLang_pop_slstring (&s))
-     return NULL;
-
-   c = (SLang_Foreach_Context_Type *)SLmalloc (sizeof (SLang_Foreach_Context_Type));
-   if (c == NULL)
-     {
-	SLang_free_slstring (s);
-	return NULL;
-     }
-
-   memset ((char *) c, 0, sizeof (SLang_Foreach_Context_Type));
-   c->string = s;
-
-   return c;
-}
-
-static void string_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   if (c == NULL) return;
-   SLang_free_slstring (c->string);
-   SLfree ((char *) c);
-}
-
-static int string_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   char ch;
-
-   (void) type;
-   ch = c->string[c->n];
-   if (ch == 0)
-     return 0;			       /* done */
-
-   c->n += 1;
-
-   if (-1 == SLclass_push_int_obj (SLANG_INT_TYPE, ch))
-     return -1;
-
-   return 1;
-}
-
-int _SLstring_list_push (_SLString_List_Type *p)
-{
-   unsigned int num;
-   int inum;
-   SLang_Array_Type *at;
-   char **buf;
-
-   if ((buf = p->buf) == NULL)
-     return SLang_push_null ();
-   
-   num = p->num;
-   inum = (int) num;
-   
-   if (num == 0) num++;
-   if (num != p->max_num)
-     {
-	if (NULL == (buf = (char **)SLrealloc ((char *) buf, sizeof (char *) * num)))
-	  {
-	     _SLstring_list_delete (p);
-	     return -1;
-	  }
-	p->max_num = num;
-	p->buf = buf;
-     }
-     
-   if (NULL == (at = SLang_create_array (SLANG_STRING_TYPE, 0, (VOID_STAR) buf, &inum, 1)))
-     {
-	_SLstring_list_delete (p);
-	return -1;
-     }
-   p->buf = NULL;
-   _SLstring_list_delete (p);
-   return SLang_push_array (at, 1);
-}
-
-int _SLstring_list_init (_SLString_List_Type *p, unsigned int max_num, unsigned int delta_num)
-{
-   if (NULL == (p->buf = (char **) SLmalloc (max_num * sizeof (char *))))
-     return -1;
-   
-   p->max_num = max_num;
-   p->num = 0;
-   p->delta_num = delta_num;
-   return 0;
-}
-
-int _SLstring_list_append (_SLString_List_Type *p, char *s)
-{
-   if (s == NULL)
-     {
-	_SLstring_list_delete (p);
-	return -1;
-     }
-
-   if (p->max_num == p->num)
-     {
-	char **b;
-	unsigned int max_num = p->num + p->delta_num;
-	b = (char **)SLrealloc ((char *)p->buf, max_num * sizeof (char *));
-	if (b == NULL)
-	  {
-	     _SLstring_list_delete (p);
-	     SLang_free_slstring (s);
-	     return -1;
-	  }
-	p->buf = b;
-	p->max_num = max_num;
-     }
-   
-   p->buf[p->num] = s;
-   p->num++;
-   return 0;
-}
-
-void _SLstring_list_delete (_SLString_List_Type *p)
-{
-   if (p->buf != NULL)
-     {
-	unsigned int i, imax;
-	char **buf = p->buf;
-	imax = p->num;
-	for (i = 0; i < imax; i++)
-	  SLang_free_slstring (buf[i]);
-	SLfree ((char *)buf);
-	p->buf = NULL;
-     }
-}
-
-/* Ref type */
-int SLang_pop_ref (SLang_Ref_Type **ref)
-{
-   return SLclass_pop_ptr_obj (SLANG_REF_TYPE, (VOID_STAR *)ref);
-}
-
-/* Note: This is ok if ptr is NULL.  Some routines rely on this behavior */
-int _SLang_push_ref (int is_global, VOID_STAR ptr)
-{
-   SLang_Ref_Type *r;
-
-   if (ptr == NULL)
-     return SLang_push_null ();
-
-   r = (SLang_Ref_Type *) SLmalloc (sizeof (SLang_Ref_Type));
-   if (r == NULL) return -1;
-
-   r->is_global = is_global;
-   r->v.nt = (SLang_Name_Type *) ptr;
-
-   if (-1 == SLclass_push_ptr_obj (SLANG_REF_TYPE, (VOID_STAR) r))
-     {
-	SLfree ((char *) r);
-	return -1;
-     }
-   return 0;
-}
-
-static void ref_destroy (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-   SLfree ((char *) *(SLang_Ref_Type **)ptr);
-}
-
-void SLang_free_ref (SLang_Ref_Type *ref)
-{
-   SLfree ((char *) ref);
-}
-
-static int ref_push (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Ref_Type *ref;
-
-   (void) type;
-
-   ref = *(SLang_Ref_Type **) ptr;
-
-   if (ref == NULL)
-     return SLang_push_null ();
-
-   return _SLang_push_ref (ref->is_global, (VOID_STAR) ref->v.nt);
-}
-
-int SLang_assign_to_ref (SLang_Ref_Type *ref, unsigned char type, VOID_STAR v)
-{
-   SLang_Object_Type *stkptr;
-   SLang_Class_Type *cl;
-   
-   cl = _SLclass_get_class (type);
-
-   /* Use apush since this function is passing ``array'' bytes rather than the
-    * address of the data.  I need to somehow make this more consistent.  To
-    * see what I mean, consider:
-    * 
-    *    double z[2];
-    *    char *s = "silly";
-    *    int i;
-    * 
-    *    SLang_assign_to_ref (ref, SLANG_INT_TYPE,    &i);
-    *    SLang_assign_to_ref (ref, SLANG_STRING_TYPE, &s);
-    *    SLang_assign_to_ref (ref, SLANG_COMPLEX_TYPE, z);
-    * 
-    * That is, all external routines that take a VOID_STAR argument need to
-    * be documented such that how the function should be called with the
-    * various class_types.
-    */
-   if (-1 == (*cl->cl_apush) (type, v))
-     return -1;
-
-   stkptr = _SLStack_Pointer;
-   if (0 == _SLang_deref_assign (ref))
-     return 0;
-
-   if (stkptr != _SLStack_Pointer)
-     SLdo_pop ();
-
-   return -1;
-}
-
-static char *ref_string (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Ref_Type *ref;
-
-   (void) type;
-   ref = *(SLang_Ref_Type **) ptr;
-   if (ref->is_global)
-     {
-	char *name, *s;
-
-	name = ref->v.nt->name;
-	if ((name != NULL)
-	    && (NULL != (s = SLmalloc (strlen(name) + 2))))
-	  {
-	     *s = '&';
-	     strcpy (s + 1, name);
-	     return s;
-	  }
-	
-	return NULL;
-     }
-   return SLmake_string ("Local Variable Reference");
-}
-
-static int ref_dereference (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return _SLang_dereference_ref (*(SLang_Ref_Type **) ptr);
-}
-
-static int ref_cmp (unsigned char type, VOID_STAR a, VOID_STAR b, int *c)
-{
-   SLang_Ref_Type *ra, *rb;
-
-   (void) type;
-   
-   ra = *(SLang_Ref_Type **)a;
-   rb = *(SLang_Ref_Type **)b;
-   
-   if (ra == NULL)
-     {
-	if (rb == NULL) *c = 0;
-	else *c = -1;
-	return 0;
-     }
-   if (rb == NULL)
-     {
-	*c = 1;
-	return 0;
-     }
-	
-   if (ra->v.nt == rb->v.nt)
-     *c = 0;
-   else *c = strcmp (ra->v.nt->name, rb->v.nt->name);
-   return 0;
-}
-
-   
-SLang_Name_Type *SLang_pop_function (void)
-{
-   SLang_Ref_Type *ref;
-   SLang_Name_Type *f;
-
-   if (SLang_peek_at_stack () == SLANG_STRING_TYPE)
-     {
-	char *name;
-	
-	if (-1 == SLang_pop_slstring (&name))
-	  return NULL;
-	
-	if (NULL == (f = SLang_get_function (name)))
-	  {
-	     SLang_verror (SL_UNDEFINED_NAME, "Function %s does not exist", name);
-	     SLang_free_slstring (name);
-	     return NULL;
-	  }
-	SLang_free_slstring (name);
-	return f;
-     }
-
-   if (-1 == SLang_pop_ref (&ref))
-     return NULL;
-
-   f = SLang_get_fun_from_ref (ref);
-   SLang_free_ref (ref);
-   return f;
-}
-
-/* This is a placeholder for version 2 */
-void SLang_free_function (SLang_Name_Type *f)
-{
-   (void) f;
-}
-
-/* NULL type */
-int SLang_push_null (void)
-{
-   return SLclass_push_ptr_obj (SLANG_NULL_TYPE, NULL);
-}
-
-int SLang_pop_null (void)
-{
-   SLang_Object_Type obj;
-   return _SLang_pop_object_of_type (SLANG_NULL_TYPE, &obj, 0);
-}
-
-static int null_push (unsigned char unused, VOID_STAR ptr_unused)
-{
-   (void) unused; (void) ptr_unused;
-   return SLang_push_null ();
-}
-
-static int null_pop (unsigned char type, VOID_STAR ptr)
-{
-   (void) type;
-
-   if (-1 == SLang_pop_null ())
-     return -1;
-
-   *(char **) ptr = NULL;
-   return 0;
-}
-
-/* Implement foreach (NULL) using (whatever) to do nothing.  This is useful
- * because suppose that X is a list but is NULL in some situations.  Then
- * when it is NULL, we want foreach(X) to do nothing.
- */
-static SLang_Foreach_Context_Type *
-null_foreach_open (unsigned char type, unsigned int num)
-{
-   (void) type;
-   SLdo_pop_n (num + 1);
-   return (SLang_Foreach_Context_Type *)1;
-}
-
-static void null_foreach_close (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   (void) c;
-}
-
-static int null_foreach (unsigned char type, SLang_Foreach_Context_Type *c)
-{
-   (void) type;
-   (void) c;
-   return 0;
-}
-
-static int null_to_bool (unsigned char type, int *t)
-{
-   (void) type;
-   *t = 0;
-   return SLang_pop_null ();
-}
-
-/* AnyType */
-int _SLanytype_typecast (unsigned char a_type, VOID_STAR ap, unsigned int na,
-			 unsigned char b_type, VOID_STAR bp)
-{
-   SLang_Class_Type *cl;
-   SLang_Any_Type **any;
-   unsigned int i;
-   unsigned int sizeof_type;
-
-   (void) b_type;
-
-   any = (SLang_Any_Type **) bp;
-   
-   cl = _SLclass_get_class (a_type);
-   sizeof_type = cl->cl_sizeof_type;
-
-   for (i = 0; i < na; i++)
-     {
-	if ((-1 == (*cl->cl_apush) (a_type, ap))
-	    || (-1 == SLang_pop_anytype (&any[i])))
-	  {
-	     while (i != 0)
-	       {
-		  i--;
-		  SLang_free_anytype (any[i]);
-		  any[i] = NULL;
-	       }
-	     return -1;
-	  }
-	ap = (VOID_STAR)((char *)ap + sizeof_type);
-     }
-
-   return 1;
-}
-
-int SLang_pop_anytype (SLang_Any_Type **any)
-{
-   SLang_Object_Type *obj;
-
-   *any = NULL;
-
-   if (NULL == (obj = (SLang_Object_Type *) SLmalloc (sizeof (SLang_Object_Type))))
-     return -1;
-
-   if (-1 == SLang_pop (obj))
-     {
-	SLfree ((char *) obj);
-	return -1;
-     }
-   *any = (SLang_Any_Type *)obj;
-   return 0;
-}
-
-/* This function will result in an object that is represented by the
- * anytype object.
- */
-int SLang_push_anytype (SLang_Any_Type *any)
-{
-   return _SLpush_slang_obj ((SLang_Object_Type *)any);
-}
-
-/* After this call, the stack will contain an Any_Type object */
-static int anytype_push (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Any_Type *obj;
-
-   /* Push the object onto the stack, then pop it back off into our anytype
-    * container.  That way, any memory managing associated with the type
-    * will be performed automatically.  Another way to think of it is that
-    * pushing an Any_Type onto the stack will create another copy of the
-    * object represented by it.
-    */
-   if (-1 == _SLpush_slang_obj (*(SLang_Object_Type **)ptr))
-     return -1;
-
-   if (-1 == SLang_pop_anytype (&obj))
-     return -1;
-
-   /* There is no need to reference count the anytype objects since every
-    * push results in a new anytype container.
-    */
-   if (-1 == SLclass_push_ptr_obj (type, (VOID_STAR) obj))
-     {
-	SLang_free_anytype (obj);
-	return -1;
-     }
-
-   return 0;
-}
-
-static void anytype_destroy (unsigned char type, VOID_STAR ptr)
-{
-   SLang_Object_Type *obj;
-
-   (void) type;
-   obj = *(SLang_Object_Type **)ptr;
-   SLang_free_object (obj);
-   SLfree ((char *) obj);
-}
-
-void SLang_free_anytype (SLang_Any_Type *any)
-{
-   if (any != NULL)
-     anytype_destroy (SLANG_ANY_TYPE, (VOID_STAR) &any);
-}
-
-static int anytype_dereference (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return _SLpush_slang_obj (*(SLang_Object_Type **) ptr);
-}
-
-/* SLANG_INTP_TYPE */
-static int intp_push (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return SLclass_push_int_obj (SLANG_INT_TYPE, **(int **)ptr);
-}
-
-static int intp_pop (unsigned char unused, VOID_STAR ptr)
-{
-   (void) unused;
-   return SLang_pop_integer (*(int **) ptr);
-}
-
-static int undefined_push (unsigned char t, VOID_STAR p)
-{
-   (void) t; (void) p;
-   if (SLang_Error == 0)
-     SLang_Error = SL_VARIABLE_UNINITIALIZED;
-   return -1;
-}
-
-int _SLregister_types (void)
-{
-   SLang_Class_Type *cl;
-
-   /* A good compiler should optimize this code away. */
-   if ((sizeof(short) != SIZEOF_SHORT)
-       || (sizeof(int) != SIZEOF_INT)
-       || (sizeof(long) != SIZEOF_LONG)
-       || (sizeof(float) != SIZEOF_FLOAT)
-       || (sizeof(double) != SIZEOF_DOUBLE))
-     SLang_exit_error ("S-Lang Library not built properly.  Fix SIZEOF_* in config.h and recompile");
-
-   if (-1 == _SLclass_init ())
-     return -1;
-
-   /* Undefined Type */
-   if (NULL == (cl = SLclass_allocate_class ("Undefined_Type")))
-     return -1;
-   (void) SLclass_set_push_function (cl, undefined_push);
-   (void) SLclass_set_pop_function (cl, undefined_push);
-   if (-1 == SLclass_register_class (cl, SLANG_UNDEFINED_TYPE, sizeof (int),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-   /* Make Void_Type a synonym for Undefined_Type.  Note that this does 
-    * not mean that Void_Type represents SLANG_VOID_TYPE.  Void_Type is 
-    * used by array_map to indicate no array is to be created.
-    */
-   if (-1 == SLclass_create_synonym ("Void_Type", SLANG_UNDEFINED_TYPE))
-     return -1;
-
-   if (-1 == _SLarith_register_types ())
-     return -1;
-
-   /* SLANG_INTP_TYPE */
-   if (NULL == (cl = SLclass_allocate_class ("_IntegerP_Type")))
-     return -1;
-   (void) SLclass_set_push_function (cl, intp_push);
-   (void) SLclass_set_pop_function (cl, intp_pop);
-   if (-1 == SLclass_register_class (cl, SLANG_INTP_TYPE, sizeof (int),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-
-   /* String Type */
-
-   if (NULL == (cl = SLclass_allocate_class ("String_Type")))
-     return -1;
-   (void) SLclass_set_destroy_function (cl, string_destroy);
-   (void) SLclass_set_push_function (cl, string_push);
-   cl->cl_foreach_open = string_foreach_open;
-   cl->cl_foreach_close = string_foreach_close;
-   cl->cl_foreach = string_foreach;
-   cl->cl_cmp = string_cmp;
-   if (-1 == SLclass_register_class (cl, SLANG_STRING_TYPE, sizeof (char *),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   /* ref Type */
-   if (NULL == (cl = SLclass_allocate_class ("Ref_Type")))
-     return -1;
-   cl->cl_dereference = ref_dereference;
-   cl->cl_push = ref_push;
-   cl->cl_destroy = ref_destroy;
-   cl->cl_string = ref_string;
-   cl->cl_cmp = ref_cmp;
-   if (-1 == SLclass_register_class (cl, SLANG_REF_TYPE,
-				     sizeof (SLang_Ref_Type *),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   /* NULL Type */
-
-   if (NULL == (cl = SLclass_allocate_class ("Null_Type")))
-     return -1;
-   cl->cl_push = null_push;
-   cl->cl_pop = null_pop;
-   cl->cl_foreach_open = null_foreach_open;
-   cl->cl_foreach_close = null_foreach_close;
-   cl->cl_foreach = null_foreach;
-   cl->cl_to_bool = null_to_bool;
-   if (-1 == SLclass_register_class (cl, SLANG_NULL_TYPE, sizeof (char *),
-				     SLANG_CLASS_TYPE_SCALAR))
-     return -1;
-
-   /* AnyType */
-   if (NULL == (cl = SLclass_allocate_class ("Any_Type")))
-     return -1;
-   (void) SLclass_set_push_function (cl, anytype_push);
-   (void) SLclass_set_destroy_function (cl, anytype_destroy);
-   cl->cl_dereference = anytype_dereference;
-   if (-1 == SLclass_register_class (cl, SLANG_ANY_TYPE, sizeof (VOID_STAR),
-				     SLANG_CLASS_TYPE_PTR))
-     return -1;
-
-   if (-1 == _SLang_init_bstring ())
-     return -1;
-
-   if ((-1 == SLclass_add_typecast (SLANG_STRING_TYPE, SLANG_INT_TYPE, string_to_int, 0))
-       || (-1 == SLclass_add_binary_op (SLANG_STRING_TYPE, SLANG_STRING_TYPE, string_string_bin_op, string_string_bin_op_result)))
-     return -1;
-
-   return 0;
-}
-
diff --git a/mdk-stage1/slang/slutty.c b/mdk-stage1/slang/slutty.c
deleted file mode 100644
index 636c1bb90..000000000
--- a/mdk-stage1/slang/slutty.c
+++ /dev/null
@@ -1,596 +0,0 @@
-/* slutty.c --- Unix Low level terminal (tty) functions for S-Lang */
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-#include "slinclud.h"
-
-#include <signal.h>
-/* sequent support thanks to Kenneth Lorber <keni@oasys.dt.navy.mil> */
-/* SYSV (SYSV ISC R3.2 v3.0) provided by iain.lea@erlm.siemens.de */
-
-#if defined (_AIX) && !defined (_ALL_SOURCE)
-# define _ALL_SOURCE	/* so NBBY is defined in <sys/types.h> */
-#endif
-
-#include <sys/time.h>
-#include <sys/types.h>
-
-#ifdef SYSV
-# include <fcntl.h>
-# ifndef CRAY
-#  include <sys/termio.h>
-#  include <sys/stream.h>
-#  include <sys/ptem.h>
-#  include <sys/tty.h>
-# endif
-#endif
-
-#ifdef __BEOS__
-/* Prototype for select */
-# include <net/socket.h>
-#endif
-
-#include <sys/file.h>
-
-#ifndef sun
-# include <sys/ioctl.h>
-#endif
-
-#ifdef __QNX__
-# include <sys/select.h>
-#endif
-
-#include <sys/stat.h>
-#include <errno.h>
-
-#if defined (_AIX) && !defined (FD_SET)
-# include <sys/select.h>	/* for FD_ISSET, FD_SET, FD_ZERO */
-#endif
-
-#ifndef O_RDWR
-# include <fcntl.h>
-#endif
-
-#include "slang.h"
-#include "_slang.h"
-
-int SLang_TT_Read_FD = -1;
-int SLang_TT_Baud_Rate;
-
-#ifdef HAVE_TERMIOS_H
-# if !defined(HAVE_TCGETATTR) || !defined(HAVE_TCSETATTR)
-#   undef HAVE_TERMIOS_H
-# endif
-#endif
-
-#ifndef HAVE_TERMIOS_H
-
-# if !defined(CBREAK) && defined(sun)
-#  ifndef BSD_COMP
-#   define BSD_COMP 1
-#  endif
-#  include <sys/ioctl.h>
-# endif
-
-typedef struct
-  {
-      struct tchars t;
-      struct ltchars lt;
-      struct sgttyb s;
-  }
-TTY_Termio_Type;
-#else
-# include <termios.h>
-typedef struct termios TTY_Termio_Type;
-#endif
-
-static TTY_Termio_Type Old_TTY;
-
-#ifdef HAVE_TERMIOS_H
-typedef struct
-{
-   unsigned int key;
-   unsigned int value;
-} Baud_Rate_Type;
-
-static Baud_Rate_Type Baud_Rates [] =
-{
-#ifdef B0
-     {B0, 0},
-#endif
-#ifdef B50
-     {B50, 50},
-#endif
-#ifdef B75
-     {B75, 75},
-#endif
-#ifdef B110
-     {B110, 110},
-#endif
-#ifdef B134
-     {B134, 134},
-#endif
-#ifdef B150
-     {B150, 150},
-#endif
-#ifdef B200
-     {B200, 200},
-#endif
-#ifdef B300
-     {B300, 300},
-#endif
-#ifdef B600
-     {B600, 600},
-#endif
-#ifdef B1200
-     {B1200, 1200},
-#endif
-#ifdef B1800
-     {B1800, 1800},
-#endif
-#ifdef B2400
-     {B2400, 2400},
-#endif
-#ifdef B4800
-     {B4800, 4800},
-#endif
-#ifdef B9600
-     {B9600, 9600},
-#endif
-#ifdef B19200
-     {B19200, 19200},
-#endif
-#ifdef B38400
-     {B38400, 38400},
-#endif
-#ifdef B57600
-     {B57600, 57600},
-#endif
-#ifdef B115200
-     {B115200, 115200},
-#endif
-#ifdef B230400
-     {B230400, 230400},
-#endif
-     {0, 0}
-};
-
-static void
-set_baud_rate (TTY_Termio_Type *tty)
-{
-#ifdef HAVE_CFGETOSPEED
-   unsigned int speed;
-   Baud_Rate_Type *b, *bmax;
-
-   if (SLang_TT_Baud_Rate)
-     return;			       /* already set */
-
-   speed = (unsigned int) cfgetospeed (tty);
-
-   b = Baud_Rates;
-   bmax = b + (sizeof (Baud_Rates)/sizeof(Baud_Rates[0]));
-   while (b < bmax)
-     {
-	if (b->key == speed)
-	  {
-	     SLang_TT_Baud_Rate = b->value;
-	     return;
-	  }
-	b++;
-     }
-#else
-   (void) tty;
-#endif
-}
-
-#endif				       /* HAVE_TERMIOS_H */
-
-#ifdef HAVE_TERMIOS_H
-# define GET_TERMIOS(fd, x) tcgetattr(fd, x)
-# define SET_TERMIOS(fd, x) tcsetattr(fd, TCSADRAIN, x)
-#else
-# ifdef TCGETS
-#  define GET_TERMIOS(fd, x) ioctl(fd, TCGETS, x)
-#  define SET_TERMIOS(fd, x) ioctl(fd, TCSETS, x)
-# else
-#  define X(x,m)  &(((TTY_Termio_Type *)(x))->m)
-#  define GET_TERMIOS(fd, x)	\
-    ((ioctl(fd, TIOCGETC, X(x,t)) || \
-      ioctl(fd, TIOCGLTC, X(x,lt)) || \
-      ioctl(fd, TIOCGETP, X(x,s))) ? -1 : 0)
-#  define SET_TERMIOS(fd, x)	\
-    ((ioctl(fd, TIOCSETC, X(x,t)) ||\
-      ioctl(fd, TIOCSLTC, X(x,lt)) || \
-      ioctl(fd, TIOCSETP, X(x,s))) ? -1 : 0)
-# endif
-#endif
-
-static int TTY_Inited = 0;
-static int TTY_Open = 0;
-
-#ifdef ultrix   /* Ultrix gets _POSIX_VDISABLE wrong! */
-# define NULL_VALUE -1
-#else
-# ifdef _POSIX_VDISABLE
-#  define NULL_VALUE _POSIX_VDISABLE
-# else
-#  define NULL_VALUE 255
-# endif
-#endif
-
-int SLang_init_tty (int abort_char, int no_flow_control, int opost)
-{
-   TTY_Termio_Type newtty;
-
-   SLsig_block_signals ();
-
-   if (TTY_Inited)
-     {
-	SLsig_unblock_signals ();
-	return 0;
-     }
-
-   TTY_Open = 0;
-
-   if ((SLang_TT_Read_FD == -1)
-       || (1 != isatty (SLang_TT_Read_FD)))
-     {
-#ifdef O_RDWR
-# ifndef __BEOS__  /* I have been told that BEOS will HANG if passed /dev/tty */
-	if ((SLang_TT_Read_FD = open("/dev/tty", O_RDWR)) >= 0)
-	  {
-	     TTY_Open = 1;
-	  }
-# endif
-#endif
-	if (TTY_Open == 0)
-	  {
-	     SLang_TT_Read_FD = fileno (stderr);
-	     if (1 != isatty (SLang_TT_Read_FD))
-	       {
-		  SLang_TT_Read_FD = fileno (stdin);
-		  if (1 != isatty (SLang_TT_Read_FD))
-		    {
-		       fprintf (stderr, "Failed to open terminal.");
-		       return -1;
-		    }
-	       }
-	  }
-     }
-
-   SLang_Abort_Char = abort_char;
-
-   /* Some systems may not permit signals to be blocked.  As a result, the
-    * return code must be checked.
-    */
-   while (-1 == GET_TERMIOS(SLang_TT_Read_FD, &Old_TTY))
-     {
-	if (errno != EINTR)
-	  {
-	     SLsig_unblock_signals ();
-	     return -1;
-	  }
-     }
-
-   while (-1 == GET_TERMIOS(SLang_TT_Read_FD, &newtty))
-     {
-	if (errno != EINTR)
-	  {
-	     SLsig_unblock_signals ();
-	     return -1;
-	  }
-     }
-
-#ifndef HAVE_TERMIOS_H
-   newtty.s.sg_flags &= ~(ECHO);
-   newtty.s.sg_flags &= ~(CRMOD);
-   /*   if (Flow_Control == 0) newtty.s.sg_flags &= ~IXON; */
-   newtty.t.t_eofc = 1;
-   if (abort_char == -1) SLang_Abort_Char = newtty.t.t_intrc;
-   newtty.t.t_intrc = SLang_Abort_Char;	/* ^G */
-   newtty.t.t_quitc = 255;
-   newtty.lt.t_suspc = 255;   /* to ignore ^Z */
-   newtty.lt.t_dsuspc = 255;    /* to ignore ^Y */
-   newtty.lt.t_lnextc = 255;
-   newtty.s.sg_flags |= CBREAK;		/* do I want cbreak or raw????? */
-#else
-
-   /* get baud rate */
-
-   newtty.c_iflag &= ~(ECHO | INLCR | ICRNL);
-#ifdef ISTRIP
-   /* newtty.c_iflag &= ~ISTRIP; */
-#endif
-   if (opost == 0) newtty.c_oflag &= ~OPOST;
-
-   set_baud_rate (&newtty);
-
-   if (no_flow_control) newtty.c_iflag &= ~IXON; else newtty.c_iflag |= IXON;
-
-   newtty.c_cc[VEOF] = 1;
-   newtty.c_cc[VMIN] = 1;
-   newtty.c_cc[VTIME] = 0;
-   newtty.c_lflag = ISIG | NOFLSH;
-   if (abort_char == -1) SLang_Abort_Char = newtty.c_cc[VINTR];
-   newtty.c_cc[VINTR] = SLang_Abort_Char;   /* ^G */
-   newtty.c_cc[VQUIT] = NULL_VALUE;
-   newtty.c_cc[VSUSP] = NULL_VALUE;   /* to ignore ^Z */
-#ifdef VDSUSP
-   newtty.c_cc[VDSUSP] = NULL_VALUE;   /* to ignore ^Y */
-#endif
-#ifdef VLNEXT
-   newtty.c_cc[VLNEXT] = NULL_VALUE;   /* to ignore ^V ? */
-#endif
-#ifdef VSWTCH
-   newtty.c_cc[VSWTCH] = NULL_VALUE;   /* to ignore who knows what */
-#endif
-#endif /* NOT HAVE_TERMIOS_H */
-
-   while (-1 == SET_TERMIOS(SLang_TT_Read_FD, &newtty))
-     {
-	if (errno != EINTR)
-	  {
-	     SLsig_unblock_signals ();
-	     return -1;
-	  }
-     }
-
-   TTY_Inited = 1;
-   SLsig_unblock_signals ();
-   return 0;
-}
-
-void SLtty_set_suspend_state (int mode)
-{
-   TTY_Termio_Type newtty;
-
-   SLsig_block_signals ();
-
-   if (TTY_Inited == 0)
-     {
-	SLsig_unblock_signals ();
-	return;
-     }
-
-   while ((-1 == GET_TERMIOS (SLang_TT_Read_FD, &newtty))
-	  && (errno == EINTR))
-     ;
-
-#ifndef HAVE_TERMIOS_H
-   /* I do not know if all systems define the t_dsuspc field */
-   if (mode == 0)
-     {
-	newtty.lt.t_suspc = 255;
-	newtty.lt.t_dsuspc = 255;
-     }
-   else
-     {
-	newtty.lt.t_suspc = Old_TTY.lt.t_suspc;
-	newtty.lt.t_dsuspc = Old_TTY.lt.t_dsuspc;
-     }
-#else
-   if (mode == 0)
-     {
-	newtty.c_cc[VSUSP] = NULL_VALUE;
-#ifdef VDSUSP
-	newtty.c_cc[VDSUSP] = NULL_VALUE;
-#endif
-     }
-   else
-     {
-	newtty.c_cc[VSUSP] = Old_TTY.c_cc[VSUSP];
-#ifdef VDSUSP
-	newtty.c_cc[VDSUSP] = Old_TTY.c_cc[VDSUSP];
-#endif
-     }
-#endif
-
-   while ((-1 == SET_TERMIOS (SLang_TT_Read_FD, &newtty))
-	  && (errno == EINTR))
-     ;
-
-   SLsig_unblock_signals ();
-}
-
-void SLang_reset_tty (void)
-{
-   SLsig_block_signals ();
-
-   if (TTY_Inited == 0)
-     {
-	SLsig_unblock_signals ();
-	return;
-     }
-
-   while ((-1 == SET_TERMIOS(SLang_TT_Read_FD, &Old_TTY))
-	  && (errno == EINTR))
-     ;
-
-   if (TTY_Open)
-     {
-	while ((-1 == close (SLang_TT_Read_FD))
-	       && (errno == EINTR))
-	  ;
-
-	TTY_Open = 0;
-	SLang_TT_Read_FD = -1;
-     }
-
-   TTY_Inited = 0;
-   SLsig_unblock_signals ();
-}
-
-static void default_sigint (int sig)
-{
-   sig = errno;			       /* use parameter */
-
-   SLKeyBoard_Quit = 1;
-   if (SLang_Ignore_User_Abort == 0) SLang_Error = SL_USER_BREAK;
-   SLsignal_intr (SIGINT, default_sigint);
-   errno = sig;
-}
-
-int SLang_set_abort_signal (void (*hand)(int))
-{
-   int save_errno = errno;
-   SLSig_Fun_Type *f;
-
-   if (hand == NULL) hand = default_sigint;
-   f = SLsignal_intr (SIGINT, hand);
-
-   errno = save_errno;
-
-   if (f == (SLSig_Fun_Type *) SIG_ERR)
-     return -1;
-
-   return 0;
-}
-
-#ifndef FD_SET
-#define FD_SET(fd, tthis) *(tthis) = 1 << (fd)
-#define FD_ZERO(tthis)    *(tthis) = 0
-#define FD_ISSET(fd, tthis) (*(tthis) & (1 << fd))
-typedef int fd_set;
-#endif
-
-static fd_set Read_FD_Set;
-
-/* HACK: If > 0, use 1/10 seconds.  If < 0, use 1/1000 seconds */
-
-int _SLsys_input_pending(int tsecs)
-{
-   struct timeval wait;
-   long usecs, secs;
-
-   if (TTY_Inited == 0) return -1;
-
-   if (tsecs >= 0)
-     {
-	secs = tsecs / 10;
-	usecs = (tsecs % 10) * 100000;
-     }
-   else
-     {
-	tsecs = -tsecs;
-	secs = tsecs / 1000;
-	usecs = (tsecs % 1000) * 1000;
-     }
-
-   wait.tv_sec = secs;
-   wait.tv_usec = usecs;
-
-   FD_ZERO(&Read_FD_Set);
-   FD_SET(SLang_TT_Read_FD, &Read_FD_Set);
-
-   return select(SLang_TT_Read_FD + 1, &Read_FD_Set, NULL, NULL, &wait);
-}
-
-int (*SLang_getkey_intr_hook) (void);
-
-static int handle_interrupt (void)
-{
-   if (SLang_getkey_intr_hook != NULL)
-     {
-	int save_tty_fd = SLang_TT_Read_FD;
-
-	if (-1 == (*SLang_getkey_intr_hook) ())
-	  return -1;
-
-	if (save_tty_fd != SLang_TT_Read_FD)
-	  return -1;
-     }
-
-   return 0;
-}
-
-unsigned int _SLsys_getkey (void)
-{
-   unsigned char c;
-
-   if (TTY_Inited == 0)
-     {
-	int ic = fgetc (stdin);
-	if (ic == EOF) return SLANG_GETKEY_ERROR;
-	return (unsigned int) ic;
-     }
-
-   while (1)
-     {
-	int ret;
-
-	if (SLKeyBoard_Quit)
-	  return SLang_Abort_Char;
-
-	if (0 == (ret = _SLsys_input_pending (100)))
-	  continue;
-
-	if (ret != -1)
-	  break;
-
-	if (SLKeyBoard_Quit)
-	  return SLang_Abort_Char;
-
-	if (errno == EINTR)
-	  {
-	     if (-1 == handle_interrupt ())
-	       return SLANG_GETKEY_ERROR;
-
-	     continue;
-	  }
-
-	break;			       /* let read handle it */
-     }
-
-   while (1)
-     {
-	int status = read(SLang_TT_Read_FD, (char *) &c, 1);
-
-	if (status > 0)
-	  break;
-
-	if (status == 0)
-	  {
-	     /* We are at the end of a file.  Let application handle it. */
-	     return SLANG_GETKEY_ERROR;
-	  }
-
-	if (errno == EINTR)
-	  {
-	     if (-1 == handle_interrupt ())
-	       return SLANG_GETKEY_ERROR;
-
-	     if (SLKeyBoard_Quit)
-	       return SLang_Abort_Char;
-
-	     continue;
-	  }
-#ifdef EAGAIN
-	if (errno == EAGAIN)
-	  {
-	     sleep (1);
-	     continue;
-	  }
-#endif
-#ifdef EWOULDBLOCK
-	if (errno == EWOULDBLOCK)
-	  {
-	     sleep (1);
-	     continue;
-	  }
-#endif
-#ifdef EIO
-	if (errno == EIO)
-	  {
-	     SLang_exit_error ("_SLsys_getkey: EIO error.");
-	  }
-#endif
-	return SLANG_GETKEY_ERROR;
-     }
-
-   return((unsigned int) c);
-}
-
diff --git a/mdk-stage1/slang/slxstrng.c b/mdk-stage1/slang/slxstrng.c
deleted file mode 100644
index 3f8a4dffa..000000000
--- a/mdk-stage1/slang/slxstrng.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright (c) 1992, 1999, 2001 John E. Davis
- * This file is part of the S-Lang library.
- *
- * You may distribute under the terms of either the GNU General Public
- * License or the Perl Artistic License.
- */
-
-/* These routines are simple and inefficient.  They were designed to work on
- * SunOS when using Electric Fence.
- */
-
-#include "slang.h"
-#include "_slang.h"
-char *SLstrcpy(register char *aa, register char *b)
-{
-   char *a = aa;
-   while ((*a++ = *b++) != 0);
-   return aa;
-}
-
-int SLstrcmp(register char *a, register char *b)
-{
-   while (*a && (*a == *b))
-     {
-	a++;
-	b++;
-     }
-   if (*a) return((unsigned char) *a - (unsigned char) *b);
-   else if (*b) return ((unsigned char) *a - (unsigned char) *b);
-   else return 0;
-}
-
-char *SLstrncpy(char *a, register char *b,register  int n)
-{
-   register char *aa = a;
-   while ((n > 0) && *b)
-     {
-	*aa++ = *b++;
-	n--;
-     }
-   while (n-- > 0) *aa++ = 0;
-   return (a);
-}
diff --git a/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2 b/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2
deleted file mode 100644
index 337b13666..000000000
--- a/mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2
+++ /dev/null
diff --git a/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2 b/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2
deleted file mode 100644
index 56279ae90..000000000
--- a/mdk-stage1/stage1-data/stage1-with-sash.tar.bz2
+++ /dev/null
diff --git a/mdk-stage1/stage1-data/stage1.tar.bz2 b/mdk-stage1/stage1-data/stage1.tar.bz2
deleted file mode 100644
index 98e62b362..000000000
--- a/mdk-stage1/stage1-data/stage1.tar.bz2
+++ /dev/null
diff --git a/mdk-stage1/stage1.c b/mdk-stage1/stage1.c
deleted file mode 100644
index e3a5b364c..000000000
--- a/mdk-stage1/stage1.c
+++ /dev/null
@@ -1,638 +0,0 @@
-/*
- * Guillaume Cottenceau (was gc@mandrakesoft.com)
- *
- * Copyright 2000-2004 Mandrakesoft
- *
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <sys/mount.h>
-#include <string.h>
-#include <errno.h>
-#include <ctype.h>
-#include <stdarg.h>
-#include <signal.h>
-#include <linux/unistd.h>
-_syscall2(int,pivot_root,const char *,new_root,const char *,put_old)
-
-#include "stage1.h"
-
-#include "log.h"
-#include "probing.h"
-#include "frontend.h"
-#include "modules.h"
-#include "tools.h"
-#include "automatic.h"
-#include "mount.h"
-#include "insmod.h"
-#include "thirdparty.h"
-
-#ifdef ENABLE_PCMCIA
-#include "pcmcia_/pcmcia.h"
-#endif
-
-#ifndef DISABLE_CDROM
-#include "cdrom.h"
-#endif
-
-#ifndef DISABLE_NETWORK
-#include "network.h"
-#endif
-
-#ifndef DISABLE_DISK
-#include "disk.h"
-#endif
-
-
-/************************************************************
- * globals */
-
-
-
-void fatal_error(char *msg)
-{
-	printf("FATAL ERROR IN STAGE1: %s\n\nI can't recover from this.\nYou may reboot your system.\n", msg);
-	while (1);
-}
-
-
-/************************************************************
- * special frontend functs
- * (the principle is to not pollute frontend code with stage1-specific stuff) */
-
-void stg1_error_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	unset_automatic();
-	verror_message(msg, args);
-	va_end(args);
-}
-
-void stg1_fatal_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	unset_automatic();
-	verror_message(msg, args);
-	va_end(args);
-        exit(1);
-}
-
-void stg1_info_message(char *msg, ...)
-{
-	va_list args;
-	va_start(args, msg);
-	if (IS_AUTOMATIC) {
-		vlog_message(msg, args);
-		return;
-	}
-	vinfo_message(msg, args);
-	va_end(args);
-}
-
-
-#ifdef SPAWN_SHELL
-static pid_t shell_pid = 0;
-
-/************************************************************
- * spawns a shell on console #2 */
-static void spawn_shell(void)
-{
-	int fd;
-	char * shell_name[] = { "/tmp/sh", NULL };
-
-	log_message("spawning a shell");
-
-	if (!IS_TESTING) {
-		fd = open("/dev/tty2", O_RDWR);
-		if (fd == -1) {
-			log_message("cannot open /dev/tty2 -- no shell will be provided");
-			return;
-		}
-		else if (access(shell_name[0], X_OK)) {
-			log_message("cannot open shell - %s doesn't exist", shell_name[0]);
-			return;
-		}
-		
-		if (!(shell_pid = fork())) {
-			dup2(fd, 0);
-			dup2(fd, 1);
-			dup2(fd, 2);
-			
-			close(fd);
-			setsid();
-			if (ioctl(0, TIOCSCTTY, NULL))
-				log_perror("could not set new controlling tty");
-
-			execv(shell_name[0], shell_name);
-			log_message("execve of %s failed: %s", shell_name[0], strerror(errno));
-			exit(-1);
-		}
-		
-		close(fd);
-	}
-}
-#endif
-
-#ifdef SPAWN_INTERACTIVE
-char * interactive_fifo = "/tmp/stage1-fifo";
-static pid_t interactive_pid = 0;
-
-/* spawns my small interactive on console #6 */
-static void spawn_interactive(void)
-{
-	int fd;
-	char * dev = "/dev/tty6";
-
-	printf("spawning my interactive on %s\n", dev);
-
-	if (!IS_TESTING) {
-		fd = open(dev, O_RDWR);
-		if (fd == -1) {
-			printf("cannot open %s -- no interactive\n", dev);
-			return;
-		}
-
-		if (mkfifo(interactive_fifo, O_RDWR)) {
-			printf("cannot create fifo -- no interactive\n");
-			return;
-		}
-		
-		if (!(interactive_pid = fork())) {
-			int fif_out;
-
-			dup2(fd, 0);
-			dup2(fd, 1);
-			dup2(fd, 2);
-			
-			close(fd);
-			setsid();
-			if (ioctl(0, TIOCSCTTY, NULL))
-				perror("could not set new controlling tty");
-
-			fif_out = open(interactive_fifo, O_WRONLY);
-			printf("Please enter your command (availables: [+,-] [rescue]).\n");
-				
-			while (1) {
-				char s[50];
-				int i = 0;
-				printf("? ");
-				fflush(stdout);
-				read(0, &(s[i++]), 1);
-				fcntl(0, F_SETFL, O_NONBLOCK);
-				while (read(0, &(s[i++]), 1) > 0 && i < sizeof(s));
-				fcntl(0, F_SETFL, 0);
-				write(fif_out, s, i-2);
-				printf("Ok.\n");
-			}
-		}
-		
-		close(fd);
-	}
-}
-#endif
-
-
-#ifdef ENABLE_PCMCIA
-static void handle_pcmcia(void)
-{
-        char * pcmcia_adapter;
-	if (kernel_version() == 2) {
-		stg1_error_message("We now use kernel pcmcia support and this won't work with a 2.2 kernel.");
-		return;
-	}
-
-	pcmcia_adapter = pcmcia_probe();
-	if (!pcmcia_adapter) {
-		log_message("no pcmcia adapter found");
-		return;
-	}
-	my_insmod("pcmcia_core", ANY_DRIVER_TYPE, NULL, 0);
-	my_insmod(pcmcia_adapter, ANY_DRIVER_TYPE, NULL, 0);
-	/* ds is an alias for pcmcia in recent 2.6 kernels
-           but we don't have modules.alias in install, so try to load both */
-	my_insmod("ds", ANY_DRIVER_TYPE, NULL, 0);
-	my_insmod("pcmcia", ANY_DRIVER_TYPE, NULL, 0);
-	
-        /* call to cardmgr takes time, let's use the wait message */
-	wait_message("Enabling PCMCIA extension cards...");
-	log_message("cardmgr rc: %d", cardmgr_call());
-	remove_wait_message();
-
-        add_to_env("PCMCIA", pcmcia_adapter);
-}
-#endif
-
-
-/************************************************************
- */
-
-static void method_select_and_prepare(void)
-{
-	enum return_type results;
-	char * choice;
-	char * means[10], * means_auto[10];
-	int i;
-
-#ifndef DISABLE_DISK
-	char * disk_install = "Hard disk"; char * disk_install_auto = "disk";
-#endif
-#ifndef DISABLE_CDROM
-	char * cdrom_install = "CDROM drive"; char * cdrom_install_auto = "cdrom";
-#endif
-#ifndef DISABLE_NETWORK
-	char * network_nfs_install = "NFS server"; char * network_nfs_install_auto = "nfs";
-	char * network_ftp_install = "FTP server"; char * network_ftp_install_auto = "ftp";
-	char * network_http_install = "HTTP server"; char * network_http_install_auto = "http";
-#endif
-	char * thirdparty_install = "Load third party modules"; char * thirdparty_install_auto = "thirdparty";
-
-	i = 0;
-#ifndef DISABLE_NETWORK
-	means[i] = network_nfs_install; means_auto[i++] = network_nfs_install_auto;
-	means[i] = network_ftp_install; means_auto[i++] = network_ftp_install_auto;
-	means[i] = network_http_install; means_auto[i++] = network_http_install_auto;
-#endif
-#ifndef DISABLE_CDROM
-	means[i] = cdrom_install; means_auto[i++] = cdrom_install_auto;
-        allow_additional_modules_floppy = 0;
-#endif
-#ifndef DISABLE_DISK
-	means[i] = disk_install; means_auto[i++] = disk_install_auto;
-        allow_additional_modules_floppy = 0;
-#endif
-	means[i] = thirdparty_install; means_auto[i++] = thirdparty_install_auto;
-	means[i] = NULL;
-
-	unlink(IMAGE_LOCATION);
-	rmdir(IMAGE_LOCATION); /* useful if we change the method, eg: we have automatic:cdrom but go back to nfs */
-
-	results = ask_from_list_auto("Please choose the installation method.", means, &choice, "method", means_auto);
-
-	if (results != RETURN_OK)
-		return method_select_and_prepare();
-
-#ifndef DISABLE_CDROM
-	if (!strcmp(choice, cdrom_install))
-		results = cdrom_prepare();
-#endif
-        
-#ifndef DISABLE_DISK
-	if (!strcmp(choice, disk_install))
-		results = disk_prepare();
-#endif
-	
-#ifndef DISABLE_NETWORK
-	if (!strcmp(choice, network_nfs_install))
-		results = nfs_prepare();
-
-#ifndef MANDRAKE_MOVE
-	if (!strcmp(choice, network_ftp_install))
-		results = ftp_prepare();
-	
-	if (!strcmp(choice, network_http_install))
-		results = http_prepare();
-#endif
-#endif
-
-	if (!strcmp(choice, thirdparty_install)) {
-		thirdparty_load_modules();
-		return method_select_and_prepare();
-        }
-
-	if (results != RETURN_OK)
-		return method_select_and_prepare();
-
-        /* try to find third party modules on the install media */
-        thirdparty_load_media_modules();
-}
-
-static enum return_type create_initial_fs_symlinks(char* symlinks)
-{
-        FILE *f;
-        char buf[5000];
-
-        if (scall(!(f = fopen(symlinks, "rb")), "fopen"))
-                return RETURN_ERROR;
-        while (fgets(buf, sizeof(buf), f)) {
-                char oldpath[500], newpath[500], newpathfinal[500];
-                buf[strlen(buf)-1] = '\0';  // trim \n
-                if (sscanf(buf, "%s %s", oldpath, newpath) != 2) {
-                        sprintf(oldpath, "%s%s", STAGE2_LOCATION_ROOTED, buf);
-                        sprintf(newpathfinal, "%s%s", SLASH_LOCATION, buf);
-                } else {
-                        sprintf(newpathfinal, "%s%s", SLASH_LOCATION, newpath);
-                }
-                log_message("creating symlink %s -> %s", oldpath, newpathfinal);
-                if (scall(symlink(oldpath, newpathfinal), "symlink"))
-                        return RETURN_ERROR;
-        }
-        fclose(f);
-        return RETURN_OK;
-}
-
-static enum return_type create_initial_fs_devices(char* devices)
-{
-        FILE *f;
-        char buf[5000];
-
-        // need to create the few devices needed to start up stage2 in a decent manner, we can't symlink or they will keep CD busy
-        if (scall(mkdir(SLASH_LOCATION "/dev", 0755), "mkdir"))
-                return RETURN_ERROR;
-        if (scall(!(f = fopen(devices, "rb")), "fopen"))
-                return RETURN_ERROR;
-        while (fgets(buf, sizeof(buf), f)) {
-                char name[500], path[500], type;
-                int major, minor;
-                sscanf(buf, "%s %c %d %d", name, &type, &major, &minor);
-                sprintf(path, "%s%s", SLASH_LOCATION, name);
-                log_message("creating device %s %c %d %d", path, type, major, minor);
-                if (scall(mknod(path, (type == 'c' ? S_IFCHR : S_IFBLK) | 0600, makedev(major, minor)), "mknod"))
-                        return RETURN_ERROR;
-        }
-        fclose(f);
-        return RETURN_OK;
-}
-
-#ifdef MANDRAKE_MOVE
-static enum return_type handle_move_clp(char* clp_name, char* live, char* location_live, char* location_mount, int* is_symlink, int preload)
-{
-	if (mount_clp_may_preload(clp_name, location_mount, preload) == RETURN_OK) {
-		return RETURN_OK;
-	} else {	
-		char *full_live = asprintf_("%s%s", location_live, live);
-                log_message("no %s found (or disabled), trying to fallback on plain tree", clp_name);
-                if (!access(full_live, R_OK)) {
-                        if (scall(symlink(location_live, location_mount), "symlink"))
-                                return RETURN_ERROR;
-                        *is_symlink = 1;
-                        return RETURN_OK;
-                } else {
-                        log_message("move: can't find %s nor %s, proceeding hoping files will be there", clp_name, full_live);
-                        return RETURN_OK;
-                }
-        }
-}
-
-int mandrake_move_post(void)
-{
-        int boot__real_is_symlink_to_raw = 0;
-        int always__real_is_symlink_to_raw = 0;
-        int totem__real_is_symlink_to_raw = 0;
-        int main__real_is_symlink_to_raw = 0;
-
-        if (handle_move_clp("live_tree_boot.clp", "/usr/bin/runstage2.pl",
-                       IMAGE_LOCATION "/live_tree_boot", BOOT_LOCATION,
-                       &boot__real_is_symlink_to_raw, 1) != RETURN_OK)
-                return RETURN_ERROR;
-
-        if (handle_move_clp("live_tree_always.clp", "/bin/bash",
-                       IMAGE_LOCATION "/live_tree_always", ALWAYS_LOCATION,
-                       &always__real_is_symlink_to_raw, 1) != RETURN_OK)
-                return RETURN_ERROR;
-
-        if (handle_move_clp("live_tree_totem.clp", "/usr/bin/totem",
-                       IMAGE_LOCATION "/live_tree_totem", TOTEM_LOCATION,
-                       &totem__real_is_symlink_to_raw, 1) != RETURN_OK)
-                return RETURN_ERROR;
-
-        if (handle_move_clp("live_tree.clp", "/etc/fstab",
-                       IMAGE_LOCATION "/live_tree", STAGE2_LOCATION,
-                       &main__real_is_symlink_to_raw, 0) != RETURN_OK)
-                return RETURN_ERROR;
-       
-        // in case we didn't mount any clp, because gzloop.o is not available later in /lib/modules
-	my_insmod("gzloop", ANY_DRIVER_TYPE, NULL, 0);
-        
-        // hardcoded :(
-        if (!access(TOTEM_LOCATION, R_OK)) {
-                if (scall(symlink("/image_totem/usr", SLASH_LOCATION "/usr"), "symlink"))
-                        return RETURN_ERROR;
-        } else
-                // need a fallback in case we don't use image_totem.clp nor live_tree_totem, but we're in -u mode
-                if (scall(symlink(STAGE2_LOCATION_ROOTED "/usr", SLASH_LOCATION "/usr"), "symlink"))
-                        return RETURN_ERROR;
-
-        if (create_initial_fs_symlinks(STAGE2_LOCATION "/move/symlinks") != RETURN_OK ||
-	    create_initial_fs_devices(STAGE2_LOCATION "/move/devices") != RETURN_OK)
-                return RETURN_ERROR;
-
-        if (boot__real_is_symlink_to_raw) {
-                if (scall(unlink(BOOT_LOCATION), "unlink"))
-                        return RETURN_ERROR;
-                if (scall(symlink(IMAGE_LOCATION_REL "/live_tree_boot", BOOT_LOCATION), "symlink"))
-                        return RETURN_ERROR;
-        }
-
-        if (always__real_is_symlink_to_raw) {
-                if (scall(unlink(ALWAYS_LOCATION), "unlink"))
-                        return RETURN_ERROR;
-                if (scall(symlink(IMAGE_LOCATION_REL "/live_tree_always", ALWAYS_LOCATION), "symlink"))
-                        return RETURN_ERROR;
-        }
-
-        if (totem__real_is_symlink_to_raw) {
-                if (scall(unlink(TOTEM_LOCATION), "unlink"))
-                        return RETURN_ERROR;
-                if (scall(symlink(IMAGE_LOCATION_REL "/live_tree_totem", TOTEM_LOCATION), "symlink"))
-                        return RETURN_ERROR;
-        }
-
-        if (main__real_is_symlink_to_raw) {
-                if (scall(unlink(STAGE2_LOCATION), "unlink"))
-                        return RETURN_ERROR;
-                if (scall(symlink(IMAGE_LOCATION_REL "/live_tree", STAGE2_LOCATION), "symlink"))
-                        return RETURN_ERROR;
-        }
-	return RETURN_OK;
-}
-#endif
-
-int do_pivot_root(void)
-{
-        int fd;
-        char rootdev[] = "0x0100"; 
-
-        if (IS_DEBUGSTAGE1)
-                while (1);
-
-        log_message("pivot_rooting");
-        // trick so that kernel won't try to mount the root device when initrd exits
-        if (scall((fd = open("/proc/sys/kernel/real-root-dev", O_WRONLY)) < 0, "open"))
-                return RETURN_ERROR;
-        if (scall(write(fd, rootdev, strlen(rootdev)) != (signed)strlen(rootdev), "write")) {
-                close(fd);
-                return RETURN_ERROR;
-        }
-        close(fd);
-
-        if (scall(mkdir(SLASH_LOCATION "/stage1", 0755), "mkdir"))
-                return RETURN_ERROR;
-
-        if (scall(pivot_root(SLASH_LOCATION, SLASH_LOCATION "/stage1"), "pivot_root"))
-                return RETURN_ERROR;
-
-        return RETURN_OK;
-}
-
-void finish_preparing(void)
-{
-#ifdef MANDRAKE_MOVE
-	if (mandrake_move_post() != RETURN_OK)
-		stg1_fatal_message("Fatal error when launching MandrakeMove.");
-#else
-	mkdir(SLASH_LOCATION "/etc", 0755);
-	mkdir(SLASH_LOCATION "/var", 0755);
-	if (IS_RESCUE) {
-                if (create_initial_fs_symlinks(STAGE2_LOCATION "/usr/share/symlinks") != RETURN_OK)
-                        stg1_fatal_message("Fatal error finishing initialization.");
-
-	} else {
-                if (create_initial_fs_symlinks(STAGE2_LOCATION "/usr/share/symlinks") != RETURN_OK ||
-		    create_initial_fs_devices(STAGE2_LOCATION "/usr/share/devices") != RETURN_OK)
-                        stg1_fatal_message("Fatal error finishing initialization.");
-	}
-#endif
-
-	/* /tmp/syslog is used by the second init, so it must be copied now, not in stage2 */
-	/* we remove it to ensure the old one is not copied over it in stage2 */
-	copy_file("/tmp/syslog", SLASH_LOCATION "/tmp/syslog", NULL);
-	unlink("/tmp/syslog");
-	copy_file("/etc/resolv.conf", SLASH_LOCATION "/etc/resolv.conf", NULL);
-	mkdir(SLASH_LOCATION "/modules", 0755);
-	copy_file("/modules/modules.dep", SLASH_LOCATION "/modules/modules.dep", NULL);
-
-	if (!IS_RESCUE) {
-		copy_file(STAGE2_LOCATION "/etc/init", SLASH_LOCATION "/etc/init", NULL);
-		chmod(SLASH_LOCATION "/etc/init", 0755);
-	}
-                
-	umount("/tmp/tmpfs");
-	do_pivot_root();
-
-	if (file_size(IS_RESCUE ? "/sbin/init" : "/etc/init") == -1)
-		stg1_fatal_message("Fatal error giving hand to second stage.");
-
-#ifdef SPAWN_SHELL
-	if (shell_pid != 0) {
-                int fd;
-		kill(shell_pid, 9);
-		fd = open("/dev/tty2", O_RDWR);
-                write(fd, "Killed\n", 7);
-                close(fd);
-        }
-#endif
-}
-
-int main(int argc __attribute__ ((unused)), char **argv __attribute__ ((unused)), char **env)
-{
-#ifdef ENABLE_NETWORK_STANDALONE
-	open_log();
-	init_frontend("");
-
-	unlink("/etc/resolv.conf"); /* otherwise it is read-only */
-	set_param(MODE_AUTOMATIC);
-	grab_automatic_params("network:dhcp");
-
-	intf_select_and_up();
-	finish_frontend();
-	return 0;
-#else
-	if (getenv("DEBUGSTAGE1")) {
-		set_param(MODE_DEBUGSTAGE1);
-		set_param(MODE_TESTING);
-        }
-
-	if (!IS_TESTING) {
-		mkdir(SLASH_LOCATION, 0755);
-		if (scall(mount("none", SLASH_LOCATION, "tmpfs", MS_MGC_VAL, NULL), "mount tmpfs"))
-			fatal_error("Fatal error initializing.");
-		mkdir(SLASH_LOCATION "/tmp", 0755);
-	}
-
-#ifdef SPAWN_INTERACTIVE
-	spawn_interactive();
-#endif
-
-	open_log();
-	log_message("welcome to the " DISTRIB_NAME " install (mdk-stage1, version " DISTRIB_VERSION " built " __DATE__ " " __TIME__")");
-	process_cmdline();
-#ifdef SPAWN_SHELL
-	spawn_shell();
-#endif
-	init_modules_insmoding();
-	init_frontend("Welcome to " DISTRIB_DESCR ", " __DATE__ " " __TIME__);
-
-        /* load usb interface as soon as possible, helps usb mouse detection in stage2 */
-	probe_that_type(USB_CONTROLLERS, BUS_USB);
-
-	if (IS_THIRDPARTY)
-		thirdparty_load_modules();
-
-#ifdef ENABLE_PCMCIA
-	if (!IS_NOAUTO)
-		handle_pcmcia();
-#endif
-        
-	if (IS_CHANGEDISK)
-		stg1_info_message("You are starting the installation with an alternate booting method. "
-				  "Please change your disk, and insert the Installation disk.");
-
-	if (IS_RESCUE && total_memory() < MEM_LIMIT_RESCUE) {
-		stg1_error_message("You are starting the rescue with a low memory configuration. "
-				   "Our experience shows that your system may crash at any point "
-				   "or lock up for no apparent reason. Continue at "
-				   "your own risk. Alternatively, you may reboot your system now.");
-	}
-
-#ifdef MANDRAKE_MOVE
-	if (total_memory() < MEM_LIMIT_MOVE)
-		stg1_info_message(DISTRIB_NAME " typically needs more than %d Mbytes of memory (detected %d Mbytes). You may proceed, but the machine may crash or lock up for no apparent reason. Continue at your own risk. Alternatively, you may reboot your system now.",
-				   MEM_LIMIT_MOVE, total_memory());
-#endif
-        method_select_and_prepare();
-
-#ifndef MANDRAKE_MOVE
-	if (access(STAGE2_LOCATION, R_OK) != 0)
-		if (symlink(IMAGE_LOCATION_REL "/" LIVE_LOCATION_REL, STAGE2_LOCATION) != 0)
-			log_perror("symlink from " IMAGE_LOCATION_REL "/" LIVE_LOCATION_REL " to " STAGE2_LOCATION " failed");
-#endif
-
-#ifdef SPAWN_INTERACTIVE
-	if (interactive_pid != 0)
-		kill(interactive_pid, 9);
-#endif
-
-	finish_preparing();
-
-	finish_frontend();
-	close_log();
-
-	if (IS_TESTING)
-		return 0;
-	else
-		return 66;
-#endif
-}
diff --git a/mdk-stage1/stage1.h b/mdk-stage1/stage1.h
deleted file mode 100644
index a14311918..000000000
--- a/mdk-stage1/stage1.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _STAGE1_H_
-#define _STAGE1_H_
-
-#include "config-stage1.h"
-#include "tools.h"
-
-
-/* Some global stuff */
-
-extern char * interactive_fifo;
-
-#define MODE_TESTING        (1 << 0)
-#define MODE_RESCUE         (1 << 3)
-#define MODE_AUTOMATIC	    (1 << 4)
-#define MODE_KEEP_MOUNTED   (1 << 5) /* for rescue */
-#define MODE_DEBUGSTAGE1    (1 << 6)
-#define MODE_CHANGEDISK     (1 << 10)
-#define MODE_THIRDPARTY     (1 << 11)
-#define MODE_NOAUTO         (1 << 12)
-#define MODE_NETAUTO        (1 << 13)
-#define MODE_RECOVERY       (1 << 14)
-
-#define IS_TESTING     (get_param(MODE_TESTING))
-#define IS_RESCUE      (get_param(MODE_RESCUE))
-#define IS_AUTOMATIC   (get_param(MODE_AUTOMATIC))
-#define IS_DEBUGSTAGE1 (get_param(MODE_DEBUGSTAGE1))
-#define IS_CHANGEDISK  (get_param(MODE_CHANGEDISK))
-#define IS_THIRDPARTY  (get_param(MODE_THIRDPARTY))
-#define IS_NOAUTO      (get_param(MODE_NOAUTO))
-#define IS_NETAUTO     (get_param(MODE_NETAUTO))
-#define IS_RECOVERY    (get_param(MODE_RECOVERY))
-#define KEEP_MOUNTED   (!IS_RESCUE || get_param(MODE_KEEP_MOUNTED))
-
-void fatal_error(char *msg) __attribute__ ((noreturn));
-
-
-void stg1_error_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-void stg1_info_message(char *msg, ...) __attribute__ ((format (printf, 1, 2)));
-
-#endif
diff --git a/mdk-stage1/stdio-frontend.c b/mdk-stage1/stdio-frontend.c
deleted file mode 100644
index ffa306811..000000000
--- a/mdk-stage1/stdio-frontend.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-/*
- * Each different frontend must implement all functions defined in frontend.h
- */
-
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdarg.h>
-#include <fcntl.h>
-#include <sys/ioctl.h>
-#include <termios.h>
-
-#include <probing.h>
-
-#include "frontend.h"
-
-
-void init_frontend(char * welcome_msg)
-{
-	printf(welcome_msg);
-	printf("\n");
-}
-
-
-void finish_frontend(void)
-{
-}
-
-static void get_any_response(void)
-{
-	unsigned char t;
-	printf("\n\t(press <enter> to proceed)");
-	fflush(stdout);
-	read(0, &t, 1);
-	fcntl(0, F_SETFL, O_NONBLOCK);
-	while (read(0, &t, 1) > 0);
-	fcntl(0, F_SETFL, 0);
-}
-	
-static int get_int_response(void)
-{
-	char s[50];
-	int j = 0;
-	unsigned int i = 0; /* (0) tied to Cancel */
-	fflush(stdout);
-	read(0, &(s[i++]), 1);
-	fcntl(0, F_SETFL, O_NONBLOCK);
-	do {
-		int v = s[i-1];
-		if (v >= '0' && v <= '9')
-			j = j*10 + (v - '0');
-	} while (read(0, &(s[i++]), 1) > 0 && i < sizeof(s));
-	fcntl(0, F_SETFL, 0);
-	return j;
-}
-
-static char * get_string_response(char * initial_string)
-{
-	/* I won't use a scanf/%s since I also want the null string to be accepted -- also, I want the initial_string */
-	char s[500];
-	int i = 0;
-	char buf[10];
-	int b_index = 0;
-	char b;
-
-	struct termios t;
-
-	memset(s, '\0', sizeof(s));
-
-	if (initial_string) {
-		printf(initial_string);
-		strcpy(s, initial_string);
-		i = strlen(s);
-	}
-	
-	/* from ncurses/tinfo/lib_raw.c:(cbreak) */
-	tcgetattr(0, &t);
-	t.c_lflag &= ~ICANON;
-	t.c_lflag |= ISIG;
-	t.c_lflag &= ~ECHO;
-	t.c_iflag &= ~ICRNL;
-	t.c_cc[VMIN] = 1;
-	t.c_cc[VTIME] = 0;
-	tcsetattr(0, TCSADRAIN, &t);
-
-	fflush(stdout);
-
-	fcntl(0, F_SETFL, O_NONBLOCK);
-
-	while (1) {
-		if (read(0, &b, 1) > 0) {
-			if (b_index == 1) {
-				if (b == 91) {
-					buf[b_index] = b;
-					b_index++;
-					continue;
-				}
-				else
-					b_index = 0;
-			}
-			if (b_index == 2) {
-				if (b == 67) {
-					if (s[i] != '\0') {
-						printf("\033[C");
-						i++;
-					}
-				}
-				if (b == 68) {
-					if (i > 0) {
-						printf("\033[D");
-						i--;
-					}
-				}
-				b_index = 0;
-				continue;
-			}
-				
-			if (b == 13)
-				break;
-			if (b == 127) {
-				if (i > 0) {
-					printf("\033[D");
-					printf(" ");
-					printf("\033[D");
-					if (s[i] == '\0')
-						s[i-1] = '\0';
-					else
-						s[i-1] = ' ';
-					i--;
-				}
-			} else if (b == 27) {
-				buf[b_index] = b;
-				b_index++;
-			} else {
-				printf("%c", b);
-				s[i] = b;
-				i++;
-			}
-		}
-	}
-
-	t.c_lflag |= ICANON;
-	t.c_lflag |= ECHO;
-	t.c_iflag |= ICRNL; 
-	tcsetattr(0, TCSADRAIN, &t);
-
-	fcntl(0, F_SETFL, 0);
-
-	printf("\n");
-	return strdup(s);
-}
-
-static void blocking_msg(char *type, char *fmt, va_list ap)
-{
-	printf(type);
-	vprintf(fmt, ap);
-	get_any_response();
-}
-
-void verror_message(char *msg, va_list ap)
-{
-	blocking_msg("> Error! ", msg, ap);
-}
-
-void vinfo_message(char *msg, va_list ap)
-{
-	blocking_msg("> Notice: ", msg, ap);
-}
-
-void vwait_message(char *msg, va_list ap)
-{
-	printf("Please wait: ");
-	vprintf(msg, ap);
-	fflush(stdout);
-}
-
-void remove_wait_message(void)
-{
-	printf("\n");
-}
-
-
-static int size_progress;
-static int actually_drawn;
-#define PROGRESS_SIZE 45
-void init_progression_raw(char *msg, int size)
-{
-	int i;
-	size_progress = size;
-	printf("%s  ", msg);
-	if (size) {
-		actually_drawn = 0;
-		for (i=0; i<PROGRESS_SIZE; i++)
-			printf(".");
-		printf("]\033[G%s [", msg);		/* only works on ANSI-compatibles */
-		fflush(stdout);
-	} else
-		printf("\n");
-}
-
-void update_progression_raw(int current_size)
-{
-	if (size_progress) {
-		if (current_size > size_progress)
-			current_size = size_progress;
-		while ((int)((current_size*PROGRESS_SIZE)/size_progress) > actually_drawn) {
-			printf("*");
-			actually_drawn++;
-		}
-	} else
-		printf("\033[GStatus: [%8d] bytes loaded...", current_size);
-	
-	fflush(stdout);
-}
-
-void end_progression_raw(void)
-{
-	if (size_progress) {
-		update_progression_raw(size_progress);
-		printf("]\n");
-	} else
-		printf(" done.\n");
-}
-
-
-enum return_type ask_from_list_comments(char *msg, char ** elems, char ** elems_comments, char ** choice)
-{
-	int justify_number = 1;
-	void print_choice_number(int i) {
-		char tmp[500];
-		snprintf(tmp, sizeof(tmp), "[%%%dd]", justify_number);
-		printf(tmp, i);
-	}
-	char ** sav_elems = elems;
-	int i = 1;
-	int j = 0;
-
-	while (elems && *elems) {
-		elems++;
-		i++;
-	}
-	if (i >= 10)
-		justify_number = 2;
-
-	elems = sav_elems;
-	i = 1;
-
-	printf("> %s\n", msg);
-	print_choice_number(0);
-	printf(" Cancel");
-
-	while (elems && *elems) {
-		if (elems_comments && *elems_comments) {
-			printf("\n");
-			print_choice_number(i);
-			printf(" %s (%s)", *elems, *elems_comments);
-			j = 0;
-		} else {
-			if (j == 0)
-				printf("\n");
-			print_choice_number(i);
-			printf(" %-14s ", *elems);
-			j++;
-		}
-		if (j == 4)
-			j = 0;
-		
-		if (elems_comments)
-			elems_comments++;
-		i++;
-		elems++;
-	}
-
-	printf("\n? "); 
-
-	j = get_int_response();
-
-	if (j == 0)
-		return RETURN_BACK;
-
-	if (j >= 1 && j <= i) {
-		*choice = strdup(sav_elems[j-1]);
-		return RETURN_OK;
-	}
-
-	return RETURN_ERROR;
-}
-
-
-enum return_type ask_from_list(char *msg, char ** elems, char ** choice)
-{
-	return ask_from_list_comments(msg, elems, NULL, choice);
-}
-
-
-enum return_type ask_yes_no(char *msg)
-{
-	int j;
-
-	printf("> %s\n[0] Yes  [1] No  [2] Back\n? ", msg);
-
-	j = get_int_response();
-
-	if (j == 0)
-		return RETURN_OK;
-	else if (j == 2)
-		return RETURN_BACK;
-	else return RETURN_ERROR;
-}
-
-
-enum return_type ask_from_entries(char *msg, char ** questions, char *** answers, int entry_size UNUSED, void (*callback_func)(char ** strings) UNUSED)
-{
-	int j, i = 0;
-	char ** already_answers = NULL;
-
-	printf("> %s\n", msg);
-
-	while (questions && *questions) {
-		printf("(%c) %s\n", i + 'a', *questions);
-		i++;
-		questions++;
-	}
-
-	if (*answers == NULL)
-		*answers = (char **) malloc(sizeof(char *) * i);
-	else
-		already_answers = *answers;
-
-	while (1) {
-		int r;
-		for (j = 0 ; j < i ; j++) {
-			printf("(%c) ? ", j + 'a');
-			if (already_answers && *already_answers) {
-				(*answers)[j] = get_string_response(*already_answers);
-				already_answers++;
-			} else
-				(*answers)[j] = get_string_response(NULL);
-
-		}
-		printf("[0] Cancel  [1] Accept  [2] Re-enter answers\n? ");
-		r = get_int_response();
-		if (r == 0)
-			return RETURN_BACK;
-		if (r == 1)
-			return RETURN_OK;
-	}
-}
-
-
-void suspend_to_console(void) {}
-void resume_from_suspend(void) {}
diff --git a/mdk-stage1/thirdparty.c b/mdk-stage1/thirdparty.c
deleted file mode 100644
index 176a24f1c..000000000
--- a/mdk-stage1/thirdparty.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- * Olivier Blin (oblin@mandrakesoft.com)
- *
- * Copyright 2005 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <sys/mount.h>
-
-#include "stage1.h"
-#include "log.h"
-#include "insmod.h"
-#include "modules.h"
-#include "mount.h"
-#include "frontend.h"
-#include "partition.h"
-#include "automatic.h"
-#include "probing.h"
-
-#include "thirdparty.h"
-
-#define THIRDPARTY_MOUNT_LOCATION "/tmp/thirdparty"
-
-static struct pcitable_entry pcitable[100];
-static int pcitable_len = 0;
-
-static enum return_type thirdparty_choose_device(char ** device, int probe_only)
-{
-	char ** medias, ** medias_models;
-	char ** ptr, ** ptr_models;
-#ifndef DISABLE_DISK
-	char ** disk_medias, ** disk_medias_models;
-	int disk_count;
-	char * parts[50];
-	char * parts_comments[50];
-#endif
-#ifndef DISABLE_CDROM
-	char ** cdrom_medias, ** cdrom_medias_models;
-	int cdrom_count;
-#endif
-	char * floppy_dev;
-	enum return_type results;
-	int count = 0;
-
-	wait_message("Looking for floppy, disk and cdrom devices ...");
-
-#ifndef DISABLE_DISK
-	disk_count = get_disks(&disk_medias, &disk_medias_models);
-	count += disk_count;
-#endif
-#ifndef DISABLE_CDROM
-        cdrom_count = get_cdroms(&cdrom_medias, &cdrom_medias_models);
-        count += cdrom_count;
-#endif
-
-	floppy_dev = floppy_device();
-	if (strstr(floppy_dev, "/dev/") == floppy_dev) {
-		floppy_dev = floppy_dev + 5;
-	}
-	if (floppy_dev)
-		count += 1;
-
-	remove_wait_message();
-
-	if (count == 0) {
-		stg1_error_message("I can't find any floppy, disk or cdrom on this system. "
-				   "No third-party kernel modules will be used.");
-		return RETURN_BACK;
-	}
-
-	if (probe_only) {
-#ifndef DISABLE_DISK
-		free(disk_medias);
-		free(disk_medias_models);
-#endif
-#ifndef DISABLE_CDROM
-		free(cdrom_medias);
-		free(cdrom_medias_models);
-#endif
-		return RETURN_OK;
-	}
-
-	ptr = medias = malloc((count + 1) * sizeof(char *));
-	ptr_models =medias_models = malloc((count + 1) * sizeof(char *));
-#ifndef DISABLE_DISK
-	memcpy(ptr, disk_medias, disk_count * sizeof(char *));
-	memcpy(ptr_models, disk_medias_models, disk_count * sizeof(char *));
-	free(disk_medias);
-	free(disk_medias_models);
-	ptr += disk_count;
-	ptr_models += disk_count;
-#endif
-#ifndef DISABLE_CDROM
-	memcpy(ptr, cdrom_medias, cdrom_count * sizeof(char *));
-	memcpy(ptr_models, cdrom_medias_models, cdrom_count * sizeof(char *));
-	free(cdrom_medias);
-	free(cdrom_medias_models);
-	cdrom_medias = ptr; /* used later to know if a cdrom is selected */
-	ptr += cdrom_count;
-	ptr_models += cdrom_count;
-#endif
-	if (floppy_dev) {
-		ptr[0] = floppy_dev;
-		ptr_models[0] = "Floppy device";
-		ptr++;
-		ptr_models++;
- 	}
-	ptr[0] = NULL;
-	ptr_models[0] = NULL;
-
-	if (count == 1) {
-		*device = medias[0];
-	}  else {
-		results = ask_from_list_comments("If you want to insert third-party kernel modules, "
-						 "please select the disk containing the modules.",
-						 medias, medias_models, device);
-		if (results != RETURN_OK)
-			return results;
-	}
- 
-	if (streq(*device, floppy_dev)) {
-		/* a floppy is selected, don't try to list partitions */
-		return RETURN_OK;
-	}
-
-#ifndef DISABLE_CDROM
-        for (ptr = cdrom_medias; ptr < cdrom_medias + cdrom_count; ptr++) {
-		if (*device == *ptr) {
-			/* a cdrom is selected, don't try to list partitions */
-			log_message("thirdparty: a cdrom is selected, using it (%s)", *device);
-			return RETURN_OK;
-		}
-	}
-#endif
-
-#ifndef DISABLE_DISK
-	/* a disk or usb key is selected */
-	if (list_partitions(*device, parts, parts_comments)) {
-		stg1_error_message("Could not read partitions information.");
-		return RETURN_ERROR;
-	}
-
-	if (parts[0] == NULL) {
-		stg1_error_message("No partition found.");
-		return RETURN_ERROR;
-	}
-
-	/* only one partition has been discovered, don't ask which one to use */
-	if (parts[1] == NULL) {
-		log_message("thirdparty: found only one partition on device (%s)", parts[0]);
-		*device = parts[0];
-		return RETURN_OK;
-        }
-
-	results = ask_from_list_comments("Please select the partition containing "
-					 "the third party modules.",
-					 parts, parts_comments, device);
-	if (results == RETURN_OK)
-		return RETURN_OK;
-#endif
-
-	stg1_error_message("Sorry, no third party device can be used.");
-
-	return RETURN_BACK;
-}
-
-
-static enum return_type thirdparty_mount_device(char * device)
-{
-        log_message("third party: trying to mount device %s", device);
-	if (try_mount(device, THIRDPARTY_MOUNT_LOCATION) != 0) {
-		stg1_error_message("I can't mount the selected device (%s).", device);
-		return RETURN_ERROR;
-	}
-	return RETURN_OK;
-}
-
-
-static enum return_type thirdparty_prompt_modules(const char *modules_location, char ** modules_list)
-{
-	enum return_type results;
-	char final_name[500];
-	char *module_name;
-	int rc;
-	char * questions[] = { "Options", NULL };
-	static char ** answers = NULL;
-
-	while (1) {
-		results = ask_from_list("Which driver would you like to insmod?", modules_list, &module_name);
-		if (results != RETURN_OK)
-			break;
-
-		sprintf(final_name, "%s/%s", modules_location, module_name);
-
-		results = ask_from_entries("Please enter the options:", questions, &answers, 24, NULL);
-		if (results != RETURN_OK)
-			continue;
-
-		rc = insmod_local_file(final_name, answers[0]);
-		if (rc) {
-			log_message("\tfailed");
-			stg1_error_message("Insmod failed.");
-		}
-	}
-	return RETURN_OK;
-}
-
-
-static void thirdparty_load_pcitable(const char *modules_location)
-{
-	char pcitable_filename[100];
-	FILE * f = NULL;
-
-	sprintf(pcitable_filename, "%s/pcitable", modules_location);
-	if (!(f = fopen(pcitable_filename, "rb"))) {
-		log_message("third_party: no external pcitable found");
-		return;
-	}
-	while (1) {
-		char buf[200];
-		struct pcitable_entry *e;
-		if (!fgets(buf, sizeof(buf), f)) break;
-		e = &pcitable[pcitable_len++];
-		sscanf(buf, "%hx\t%hx\t\"%[^ \"]\"\t\"%[^ \"]\"", &e->vendor, &e->device, e->module, e->description);
-	}
-	fclose(f);
-}
-
-
-static int thirdparty_is_detected(char *driver) {
-	int i, j;
-
-	for (i = 0; i < detected_devices_len ; i++) {
-		/* first look for the IDs in the third-party pcitable */
-		for (j = 0; j < pcitable_len ; j++) {
-			if (pcitable[j].vendor == detected_devices[i].vendor &&
-			    pcitable[j].device == detected_devices[i].device &&
-			    !strcmp(pcitable[j].module, driver)) {
-				log_message("probing: found device for module %s", driver);
-				return 1;
-			}
-		}
-		/* if not found, compare with the detected driver */
-		if (!strcmp(detected_devices[i].module, driver)) {
-			log_message("probing: found device for module %s", driver);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static enum return_type thirdparty_autoload_modules(const char *modules_location, char ** modules_list, FILE *f, int load_detected_only)
-{
-	while (1) {
-		char final_name[500];
-		char module[500];
-		char * options;
-		char ** entry = modules_list;
-
-		if (!fgets(module, sizeof(module), f)) break;
-		if (module[0] == '#' || strlen(module) == 0)
-			continue;
-
-		while (module[strlen(module)-1] == '\n')
-			module[strlen(module)-1] = '\0';
-		options = strchr(module, ' ');
-		if (options) {
-			options[0] = '\0';
-			options++;
-		}
-
-		if (load_detected_only && !thirdparty_is_detected(module)) {
-			log_message("third party: no device detected for module %s, skipping", module);
-			continue;
-		}
-
-		log_message("third party: auto-loading module (%s) with options (%s)", module, options);
-		while (entry && *entry) {
-			if (!strncmp(*entry, module, strlen(module)) && (*entry)[strlen(module)] == '.') {
-				sprintf(final_name, "%s/%s", modules_location, *entry);
-				if (insmod_local_file(final_name, options)) {
-					log_message("\t%s (third party media): failed", *entry);
-					stg1_error_message("Insmod %s (third party media) failed.", *entry);
-				}
-				break;
-			}
-			entry++;
-		}
-		if (!entry || !*entry) {
-			enum insmod_return ret = my_insmod(module, ANY_DRIVER_TYPE, options, 0);
-			if (ret != INSMOD_OK) {
-				log_message("\t%s (marfile): failed", module);
-				stg1_error_message("Insmod %s (marfile) failed.", module);
-			}
-		}
-	}
-
-	return RETURN_OK;
-}
-
-static enum return_type thirdparty_try_directory(char * root_directory, int interactive) {
-	char modules_location[100];
-	char list_filename[50];
-	FILE *f_load, *f_detect;
-	char **modules_list;
-
-	/* look first in the specific third-party directory */
-	strcpy(modules_location, root_directory);
-	strcat(modules_location, THIRDPARTY_DIRECTORY);
-	modules_list = list_directory(modules_location);
-
-	/* if it's empty, look in the root of selected device */
-	if (!modules_list || !modules_list[0]) {
-		modules_location[strlen(root_directory)] = '\0';
-		modules_list = list_directory(modules_location);
-		if (interactive)
-			add_to_env("THIRDPARTY_DIR", "");
-	} else {
-		if (interactive)
-			add_to_env("THIRDPARTY_DIR", THIRDPARTY_DIRECTORY);
-        }
-
-	log_message("third party: using modules location %s", modules_location);
-
-	if (!modules_list || !*modules_list) {
-		log_message("third party: no modules found");
-		if (interactive)
-			stg1_error_message("No modules found on selected device.");
-		return RETURN_ERROR;
-        }
-
-	sprintf(list_filename, "%s/to_load", modules_location);
-	f_load = fopen(list_filename, "rb");
-	if (f_load) {
-		thirdparty_autoload_modules(modules_location, modules_list, f_load, 0);
-		fclose(f_load);
-	}
-
-	sprintf(list_filename, "%s/to_detect", modules_location);
-	f_detect = fopen(list_filename, "rb");
-	if (f_detect) {
-		probing_detect_devices();
-		thirdparty_load_pcitable(modules_location);
-		thirdparty_autoload_modules(modules_location, modules_list, f_detect, 1);
-		fclose(f_detect);
-	}
-
-	if (f_load || f_detect)
-		return RETURN_OK;
-	else if (interactive) {
-		if (IS_AUTOMATIC)
-			stg1_error_message("I can't find a \"to_load\" file. Please select the modules manually.");
-		log_message("third party: no \"to_load\" file, prompting for modules");
-		return thirdparty_prompt_modules(modules_location, modules_list);
-	} else {
-		return RETURN_OK;
-	}
-}
-
-void thirdparty_load_media_modules(void)
-{
-	thirdparty_try_directory(IMAGE_LOCATION, 0);
-}
-
-void thirdparty_load_modules(void)
-{
-	enum return_type results;
-	char * device;
-
-	device = NULL;
-	if (IS_AUTOMATIC) {
-		device = get_auto_value("thirdparty");
-		thirdparty_choose_device(NULL, 1); /* probe only to create devices */
-		log_message("third party: trying automatic device %s", device);
-		if (thirdparty_mount_device(device) != RETURN_OK)
-			device = NULL;
-	}
-
-	while (!device || streq(device, "")) {
-		results = thirdparty_choose_device(&device, 0);
-		if (results == RETURN_BACK)
-			return;
-		if (thirdparty_mount_device(device) != RETURN_OK)
-			device = NULL;
-	}
-
-	log_message("third party: using device %s", device);
-	add_to_env("THIRDPARTY_DEVICE", device);
-
-	results = thirdparty_try_directory(THIRDPARTY_MOUNT_LOCATION, 1);
-	umount(THIRDPARTY_MOUNT_LOCATION);
-
-	if (results != RETURN_OK)
-		return thirdparty_load_modules();
-}
diff --git a/mdk-stage1/thirdparty.h b/mdk-stage1/thirdparty.h
deleted file mode 100644
index 23066374c..000000000
--- a/mdk-stage1/thirdparty.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- * Olivier Blin (oblin@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _THIRDPARTY_H_
-#define _THIRDPARTY_H_
-
-#define THIRDPARTY_DIRECTORY "/install/thirdparty"
-
-/* load third party modules present on install media
- * use to_load and to_detect files in /install/thirdparty
- * do not prompt user
- */
-void thirdparty_load_media_modules(void);
-
-/* load modules if to_load or to_detect files are present
- * prompt user if no to_load file is present
- */
-void thirdparty_load_modules(void);
-
-#endif
diff --git a/mdk-stage1/tools.c b/mdk-stage1/tools.c
deleted file mode 100644
index 4f4bff8bb..000000000
--- a/mdk-stage1/tools.c
+++ /dev/null
@@ -1,561 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <string.h>
-#include <ctype.h>
-#include <stdio.h>
-#include <dirent.h>
-#include <sys/types.h>
-#include <sys/mount.h>
-#include <sys/poll.h>
-#include <errno.h>
-#include <sys/utsname.h>
-#include <sys/ioctl.h>
-#include <linux/fd.h>
-#include "stage1.h"
-#include "log.h"
-#include "mount.h"
-#include "frontend.h"
-#include "automatic.h"
-
-#include "tools.h"
-#include "probing.h"
-#include "modules.h"
-#include "lomount.h"
-
-static struct param_elem params[50];
-static int param_number = 0;
-
-void process_cmdline(void)
-{
-	char buf[512];
-	int size, i;
-	int fd = -1; 
-
-	if (IS_TESTING) {
-		log_message("TESTING: opening cmdline... ");
-
-		if ((fd = open("cmdline", O_RDONLY)) == -1)
-			log_message("TESTING: could not open cmdline");
-	}
-
-	if (fd == -1) {
-		log_message("opening /proc/cmdline... ");
-
-		if ((fd = open("/proc/cmdline", O_RDONLY)) == -1)
-			fatal_error("could not open /proc/cmdline");
-	}
-
-	size = read(fd, buf, sizeof(buf));
-	buf[size-1] = '\0'; // -1 to eat the \n
-	close(fd);
-
-	log_message("\t%s", buf);
-
-	i = 0;
-	while (buf[i] != '\0') {
-		char *name, *value = NULL;
-		int j = i;
-		while (buf[i] != ' ' && buf[i] != '=' && buf[i] != '\0')
-			i++;
-		if (i == j) {
-			i++;
-			continue;
-		}
-		name = memdup(&buf[j], i-j + 1);
-		name[i-j] = '\0';
-
-		if (buf[i] == '=') {
-			int k = i+1;
-			i++;
-			while (buf[i] != ' ' && buf[i] != '\0')
-				i++;
-			value = memdup(&buf[k], i-k + 1);
-			value[i-k] = '\0';
-		}
-
-		params[param_number].name = name;
-		params[param_number].value = value;
-		param_number++;
-		if (!strcmp(name, "changedisk")) set_param(MODE_CHANGEDISK);
-		if (!strcmp(name, "updatemodules") ||
-		    !strcmp(name, "thirdparty")) set_param(MODE_THIRDPARTY);
-		if (!strcmp(name, "rescue")) set_param(MODE_RESCUE);
-		if (!strcmp(name, "keepmounted")) set_param(MODE_KEEP_MOUNTED);
-		if (!strcmp(name, "noauto")) set_param(MODE_NOAUTO);
-		if (!strcmp(name, "netauto")) set_param(MODE_NETAUTO);
-		if (!strcmp(name, "debugstage1")) set_param(MODE_DEBUGSTAGE1);
-		if (!strcmp(name, "automatic")) {
-			set_param(MODE_AUTOMATIC);
-			grab_automatic_params(value);
-		}
-		if (buf[i] == '\0')
-			break;
-		i++;
-	}
-	
-	log_message("\tgot %d args", param_number);
-}
-
-
-int stage1_mode = 0;
-
-int get_param(int i)
-{
-#ifdef SPAWN_INTERACTIVE
-	static int fd = 0;
-	char buf[5000];
-	char * ptr;
-	int nb;
-
-	if (fd <= 0) {
-		fd = open(interactive_fifo, O_RDONLY);
-		if (fd == -1)
-			return (stage1_mode & i);
-		fcntl(fd, F_SETFL, O_NONBLOCK);
-	}
-
-	if (fd > 0) {
-		if ((nb = read(fd, buf, sizeof(buf))) > 0) {
-			buf[nb] = '\0';
-			ptr = buf;
-			while ((ptr = strstr(ptr, "+ "))) {
-				if (!strncmp(ptr+2, "rescue", 6)) set_param(MODE_RESCUE);
-				ptr++;
-			}
-			ptr = buf;
-			while ((ptr = strstr(ptr, "- "))) {
-				if (!strncmp(ptr+2, "rescue", 6)) unset_param(MODE_RESCUE);
-				ptr++;
-			}
-		}
-	}
-#endif
-
-	return (stage1_mode & i);
-}
-
-char * get_param_valued(char *param_name)
-{
-	int i;
-	for (i = 0; i < param_number ; i++)
-		if (!strcmp(params[i].name, param_name))
-			return params[i].value;
-
-	return NULL;
-}
-
-void set_param_valued(char *param_name, char *param_value)
-{
-	params[param_number].name = param_name;
-	params[param_number].value = param_value;
-	param_number++;
-}
-
-void set_param(int i)
-{
-	stage1_mode |= i;
-}
-
-void unset_param(int i)
-{
-	stage1_mode &= ~i;
-}
-
-void unset_automatic(void)
-{
-	log_message("unsetting automatic");
-	unset_param(MODE_AUTOMATIC);
-	exit_bootsplash();
-}
-
-// warning, many things rely on the fact that:
-// - when failing it returns 0
-// - it stops on first non-digit char
-int charstar_to_int(const char * s)
-{
-	int number = 0;
-	while (*s && isdigit(*s)) {
-		number = (number * 10) + (*s - '0');
-		s++;
-	}
-	return number;
-}
-
-off_t file_size(const char * path)
-{
-	struct stat statr;
-	if (stat(path, &statr))
-		return -1;
-        else
-                return statr.st_size;
-}
-
-int total_memory(void)
-{
-	int value;
-
-	/* drakx powered: use /proc/kcore and rounds every 4 Mbytes */
-	value = 4 * ((int)((float)file_size("/proc/kcore") / 1024 / 1024 / 4 + 0.5));
-	log_message("Total Memory: %d Mbytes", value);
-
-	return value;
-}
-
-
-int image_has_stage2()
-{
-#ifdef MANDRAKE_MOVE
-        return access(IMAGE_LOCATION "/live_tree.clp", R_OK) == 0;
-#else
-	return access(CLP_FILE_REL(IMAGE_LOCATION "/"), R_OK) == 0 ||
-	       access(IMAGE_LOCATION "/" LIVE_LOCATION_REL, R_OK) == 0;
-#endif
-}
-
-int ramdisk_possible(void)
-{
-	if (total_memory() > (IS_RESCUE ? MEM_LIMIT_RESCUE : MEM_LIMIT_DRAKX))
-		return 1;
-	else {
-		log_message("warning, ramdisk is not possible due to low mem!");
-		return 0;
-	}
-}
-
-int clp_preload(void)
-{
-	if (total_memory() > (IS_RESCUE ? MEM_LIMIT_RESCUE_PRELOAD : MEM_LIMIT_DRAKX_PRELOAD))
-		return 1;
-	else {
-		log_message("warning, not preloading clp due to low mem");
-		return 0;
-	}
-}
-
-enum return_type save_fd(int from_fd, char * to, void (*callback_func)(int overall))
-{
-        FILE * f_to;
-        size_t quantity __attribute__((aligned(16))), overall = 0;
-        char buf[4096] __attribute__((aligned(4096)));
-        int ret = RETURN_ERROR;
-
-        if (!(f_to = fopen(to, "w"))) {
-                log_perror(to);
-                goto close_from;
-        }
-
-        do {
-		quantity = read(from_fd, buf, sizeof(buf));
-		if (quantity > 0) {
-                        if (fwrite(buf, 1, quantity, f_to) != quantity) {
-                                log_message("short write (%s)", strerror(errno));
-                                goto cleanup;
-                        }
-                } else if (quantity == -1) {
-			log_message("an error occured: %s", strerror(errno));
-			goto cleanup;
-		}
-
-                if (callback_func) {
-                        overall += quantity;
-                        callback_func(overall);
-                }
-        } while (quantity);
-
-        ret = RETURN_OK;
-
- cleanup:
-        fclose(f_to);
- close_from:
-        close(from_fd);
-
-        return ret;
-}
-
-enum return_type copy_file(char * from, char * to, void (*callback_func)(int overall))
-{
-        int from_fd;
-
-	log_message("copy_file: %s -> %s", from, to);
-
-	from_fd = open(from, O_RDONLY);
-	if (from_fd != -1) {
-		return save_fd(from_fd, to, callback_func);
-	} else {
-                log_perror(from);
-                return RETURN_ERROR;
-        }
-}
-
-enum return_type mount_clp(char *clp,  char *location_mount)
-{
-	if (lomount(clp, location_mount, NULL, 1)) {
-                stg1_error_message("Could not mount compressed loopback :(.");
-                return RETURN_ERROR;
-        }
-	return RETURN_OK;
-}
-
-enum return_type preload_mount_clp(int clp_fd, int clp_size, char *clp_name, char *location_mount)
-{
-	int ret;
-	char *clp_tmpfs = asprintf_("%s/tmp/%s", SLASH_LOCATION, clp_name);
-#ifdef MANDRAKE_MOVE
-	static int count = 0;
-	char buf[5000];
-	sprintf(buf, "Loading program into memory (part %d)...", ++count);
-#else
-	char *buf = "Loading program into memory...";
-#endif
-	init_progression(buf, clp_size);
-	ret = save_fd(clp_fd, clp_tmpfs, update_progression);
-	end_progression();
-	if (ret != RETURN_OK)
-		return ret;
-	
-	return mount_clp(clp_tmpfs, location_mount);
-}
-
-enum return_type mount_clp_may_preload(char *clp_name, char *location_mount, int preload)
-{
-	char *clp = asprintf_("%s/%s", CLP_LOCATION, clp_name);
-
-	log_message("mount_clp_may_preload: %s into %s (preload = %d)", clp, location_mount, preload);
-
-        if (access(clp, R_OK) != 0) return RETURN_ERROR;
-
-        if (preload) {
-		int clp_fd = open(clp, O_RDONLY);
-		if (clp_fd != -1) {
-			return preload_mount_clp(clp_fd, file_size(clp), clp_name, location_mount);
-		} else {
-			log_perror(clp);
-			return RETURN_ERROR;
-		}
-	} else {
-                return mount_clp(clp, location_mount);
-	}
-}
-
-#ifndef MANDRAKE_MOVE
-enum return_type may_load_clp(void)
-{
-	if (!IS_RESCUE && access(IMAGE_LOCATION "/" LIVE_LOCATION_REL, R_OK) == 0) {
-		/* LIVE install */
-		return RETURN_OK;
-	} else {
-		/* CLP install */
-		return mount_clp_may_preload(CLP_NAME(""), STAGE2_LOCATION, clp_preload());
-	}
-}
-
-enum return_type load_clp_fd(int fd, int size)
-{
-	return preload_mount_clp(fd, size, CLP_NAME(""), STAGE2_LOCATION);
-}
-#endif
-
-/* pixel's */
-void * memdup(void *src, size_t size)
-{
-	void * r;
-	r = malloc(size);
-	memcpy(r, src, size);
-	return r;
-}
-
-
-void add_to_env(char * name, char * value)
-{
-        FILE* fakeenv = fopen(SLASH_LOCATION "/tmp/env", "a");
-        if (fakeenv) {
-                char* e = asprintf_("%s=%s\n", name, value);
-                fwrite(e, 1, strlen(e), fakeenv);
-                free(e);
-                fclose(fakeenv);
-        } else 
-                log_message("couldn't fopen to fake env");
-}
-
-
-char ** list_directory(char * direct)
-{
-	char * tmp[50000]; /* in /dev there can be many many files.. */
-	int i = 0;
-	struct dirent *ep;
-	DIR *dp = opendir(direct);
-	while (dp && (ep = readdir(dp))) {
-		if (strcmp(ep->d_name, ".") && strcmp(ep->d_name, "..")) {
-			tmp[i] = strdup(ep->d_name);
-			i++;
-		}
-	}
-	if (dp)
-		closedir(dp);
-	tmp[i] = NULL;
-	return memdup(tmp, sizeof(char*) * (i+1));
-}
-
-
-int string_array_length(char ** a)
-{
-	int i = 0;
-	if (!a)
-		return -1;
-	while (a && *a) {
-		a++;
-		i++;
-	}
-	return i;
-}
-
-int kernel_version(void)
-{
-        struct utsname val;
-        if (uname(&val)) {
-                log_perror("uname failed");
-                return -1;
-        }
-        return charstar_to_int(val.release + 2);
-}
-
-int try_mount(char * dev, char * location)
-{
-	char device_fullname[50];
-	strcpy(device_fullname, "/dev/");
-	strcat(device_fullname, dev);
-
-	if (my_mount(device_fullname, location, "ext2", 0) == -1 &&
-	    my_mount(device_fullname, location, "vfat", 0) == -1 &&
-	    my_mount(device_fullname, location, "ntfs", 0) == -1 &&
-	    my_mount(device_fullname, location, "reiserfs", 0) == -1 &&
-	    my_mount(device_fullname, location, "iso9660", 0) == -1) {
-                return 1;
-        }
-
-        return 0;
-}
-
-#ifndef DISABLE_DISK
-int get_disks(char *** names, char *** models)
-{
-	char ** ptr;
-	int count = 0;
-
-	my_insmod("sd_mod", ANY_DRIVER_TYPE, NULL, 0);
-
-	get_medias(DISK, names, models, BUS_ANY);
-
-	ptr = *names;
-	while (ptr && *ptr) {
-		count++;
-		ptr++;
-	}
-
-        return count;
-}
-#endif
-
-#ifndef DISABLE_CDROM
-int get_cdroms(char *** names, char *** models)
-{
-	char ** ptr;
-	int count = 0;
-
-	my_insmod("ide-cd", ANY_DRIVER_TYPE, NULL, 0);
-	my_insmod("sr_mod", ANY_DRIVER_TYPE, NULL, 0);
-
-	get_medias(CDROM, names, models, BUS_ANY);
-
-	ptr = *names;
-	while (ptr && *ptr) {
-		count++;
-		ptr++;
-	}
-
-	return count;
-}
-#endif
-
-char * floppy_device(void)
-{
-        char ** names, ** models;
-        int fd;
-	my_insmod("floppy", ANY_DRIVER_TYPE, NULL, 0);
-        fd = open("/dev/fd0", O_RDONLY|O_NONBLOCK);
-        if (fd != -1) {
-                char drivtyp[17];
-                if (!ioctl(fd, FDGETDRVTYP, (void *)drivtyp)) {
-                        struct floppy_drive_struct ds;
-                        log_message("/dev/fd0 type: %s", drivtyp);
-                        if (!ioctl(fd, FDPOLLDRVSTAT, &ds)) {
-                                log_message("\ttrack: %d", ds.track);
-                                if (ds.track >= 0) {
-                                        close(fd);
-                                        return "/dev/fd0";
-                                }
-                        }
-                } else {
-                        log_perror("can't FDGETDRVTYP /dev/fd0");
-                }
-                close(fd);
-        }
-        log_message("seems that you don't have a regular floppy drive");
-        my_insmod("sd_mod", ANY_DRIVER_TYPE, NULL, 0);
-	get_medias(FLOPPY, &names, &models, BUS_ANY);
-	if (names && *names)
-                return asprintf_("/dev/%s", *names);
-        else
-                return "/dev/fd0";
-}
-
-char * asprintf_(const char *msg, ...)
-{
-        int n;
-        char * s;
-        va_list arg_ptr;
-        va_start(arg_ptr, msg);
-        n = vsnprintf(0, 1000000, msg, arg_ptr);
-        va_start(arg_ptr, msg);
-        if ((s = malloc(n + 1))) {
-                vsnprintf(s, n + 1, msg, arg_ptr);
-                va_end(arg_ptr);
-                return s;
-        }
-        va_end(arg_ptr);
-        return strdup("");
-}
-
-int scall_(int retval, char * msg, char * file, int line)
-{
-	char tmp[5000];
-        sprintf(tmp, "%s(%s:%d) failed", msg, file, line);
-        if (retval)
-                log_perror(tmp);
-        return retval;
-}
diff --git a/mdk-stage1/tools.h b/mdk-stage1/tools.h
deleted file mode 100644
index b7681a16b..000000000
--- a/mdk-stage1/tools.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan (ewt@redhat.com)
- *
- * Copyright 1996 Red Hat Software 
- *
- */
-
-#ifndef _TOOLS_H_
-#define _TOOLS_H_
-
-#include <stdlib.h>
-#include "bootsplash.h"
-
-void process_cmdline(void);
-int get_param(int i);
-void set_param(int i);
-void unset_param(int i);
-void unset_automatic(void);
-int charstar_to_int(const char * s);
-off_t file_size(const char * path);
-int total_memory(void);
-int image_has_stage2();
-int ramdisk_possible(void);
-enum return_type copy_file(char * from, char * to, void (*callback_func)(int overall));
-enum return_type preload_mount_clp(int clp_fd, int clp_size, char *clp_name, char *location_mount);
-enum return_type mount_clp(char *clp,  char *location_mount);
-enum return_type mount_clp_may_preload(char *clp_name, char *location_mount, int preload);
-#ifndef MANDRAKE_MOVE
-enum return_type load_clp_fd(int fd, int size);
-enum return_type may_load_clp(void);
-#endif
-void * memdup(void *src, size_t size);
-void add_to_env(char * name, char * value);
-char ** list_directory(char * direct);
-int string_array_length(char ** a);
-int kernel_version(void);
-int try_mount(char * dev, char * location);
-#ifndef DISABLE_DISK
-int get_disks(char *** names, char *** models);
-#endif
-#ifndef DISABLE_CDROM
-int get_cdroms(char *** names, char *** models);
-#endif
-char * floppy_device(void);
-char * asprintf_(const char *msg, ...);
-int scall_(int retval, char * msg, char * file, int line);
-#define scall(retval, msg) scall_(retval, msg, __FILE__, __LINE__)
-
-struct param_elem
-{
-	char * name;
-	char * value;
-};
-
-#define ptr_begins_static_str(pointer,static_str) (!strncmp(pointer,static_str,sizeof(static_str)-1))
-#define streq(a,b) (!strcmp(a,b))
-
-#endif
diff --git a/mdk-stage1/url.c b/mdk-stage1/url.c
deleted file mode 100644
index 6187a6195..000000000
--- a/mdk-stage1/url.c
+++ /dev/null
@@ -1,524 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan <ewt@redhat.com> and Matt Wilson <msw@redhat.com>
- *
- * Copyright 1999 Red Hat, Inc.
- *
- */
-
-#include <alloca.h>
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <netinet/in_systm.h>
-
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netdb.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/socket.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <unistd.h>
-#include <sys/poll.h>
-
-#include <netinet/in.h>
-#include <netinet/ip.h>
-#include <arpa/inet.h>
-
-#include "dns.h"
-#include "log.h"
-#include "tools.h"
-
-#include "url.h"
-
-
-#define TIMEOUT_SECS 60
-#define BUFFER_SIZE 4096
-
-
-static int ftp_check_response(int sock, char ** str)
-{
-	static char buf[BUFFER_SIZE + 1];
-	int bufLength = 0; 
-	struct pollfd polls;
-	char * chptr, * start;
-	int bytesRead, rc = 0;
-	int doesContinue = 1;
-	char errorCode[4];
- 
-	errorCode[0] = '\0';
-    
-	do {
-		polls.fd = sock;
-		polls.events = POLLIN;
-		if (poll(&polls, 1, TIMEOUT_SECS*1000) != 1)
-			return FTPERR_BAD_SERVER_RESPONSE;
-
-		bytesRead = read(sock, buf + bufLength, sizeof(buf) - bufLength - 1);
-
-		bufLength += bytesRead;
-
-		buf[bufLength] = '\0';
-
-		/* divide the response into lines, checking each one to see if 
-		   we are finished or need to continue */
-
-		start = chptr = buf;
-
-		do {
-			while (*chptr != '\n' && *chptr) chptr++;
-
-			if (*chptr == '\n') {
-				*chptr = '\0';
-				if (*(chptr - 1) == '\r') *(chptr - 1) = '\0';
-				if (str) *str = start;
-
-				if (errorCode[0]) {
-					if (!strncmp(start, errorCode, 3) && start[3] == ' ')
-						doesContinue = 0;
-				} else {
-					strncpy(errorCode, start, 3);
-					errorCode[3] = '\0';
-					if (start[3] != '-') {
-						doesContinue = 0;
-					} 
-				}
-
-				start = chptr + 1;
-				chptr++;
-			} else {
-				chptr++;
-			}
-		} while (*chptr);
-
-		if (doesContinue && chptr > start) {
-			memcpy(buf, start, chptr - start - 1);
-			bufLength = chptr - start - 1;
-		} else {
-			bufLength = 0;
-		}
-	} while (doesContinue);
-
-	if (*errorCode == '4' || *errorCode == '5') {
-		if (!strncmp(errorCode, "550", 3)) {
-			return FTPERR_FILE_NOT_FOUND;
-		}
-
-		return FTPERR_BAD_SERVER_RESPONSE;
-	}
-
-	if (rc) return rc;
-
-	return 0;
-}
-
-static int ftp_command(int sock, char * command, char * param)
-{
-	char buf[500];
-	int rc;
-
-	strcpy(buf, command);
-	if (param) {
-		strcat(buf, " ");
-		strcat(buf, param);
-	}
-	
-	strcat(buf, "\r\n");
-     
-	if (write(sock, buf, strlen(buf)) != (ssize_t)strlen(buf)) {
-		return FTPERR_SERVER_IO_ERROR;
-	}
-
-	if ((rc = ftp_check_response(sock, NULL)))
-		return rc;
-
-	return 0;
-}
-
-static int get_host_address(char * host, struct in_addr * address)
-{
-	if (isdigit(host[0])) {
-		if (!inet_aton(host, address)) {
-			return FTPERR_BAD_HOST_ADDR;
-		}
-	} else {
-		if (mygethostbyname(host, address))
-			return FTPERR_BAD_HOSTNAME;
-	}
-    
-	return 0;
-}
-
-int ftp_open_connection(char * host, char * name, char * password, char * proxy)
-{
-	int sock;
-	struct in_addr serverAddress;
-	struct sockaddr_in destPort;
-	int rc;
-	int port = 21;
-
-	if (!strcmp(name, "")) {
-		name = "anonymous";
-		password = "-drakx@";
-	}
-
-	if (strcmp(proxy, "")) {
-		name = asprintf_("%s@%s", name, host);
-		host = proxy;
-	}
-
-	if ((rc = get_host_address(host, &serverAddress))) return rc;
-
-	sock = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
-	if (sock < 0) {
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	destPort.sin_family = AF_INET;
-	destPort.sin_port = htons(port);
-	destPort.sin_addr = serverAddress;
-
-	if (connect(sock, (struct sockaddr *) &destPort, sizeof(destPort))) {
-		close(sock);
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	/* ftpCheckResponse() assumes the socket is nonblocking */
-	if (fcntl(sock, F_SETFL, O_NONBLOCK)) {
-		close(sock);
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	if ((rc = ftp_check_response(sock, NULL))) {
-		return rc;     
-	}
-
-	if ((rc = ftp_command(sock, "USER", name))) {
-		close(sock);
-		return rc;
-	}
-
-	if ((rc = ftp_command(sock, "PASS", password))) {
-		close(sock);
-		return rc;
-	}
-
-	if ((rc = ftp_command(sock, "TYPE", "I"))) {
-		close(sock);
-		return rc;
-	}
-
-	return sock;
-}
-
-
-int ftp_data_command(int sock, char * command, char * param)
-{
-	int dataSocket;
-	struct sockaddr_in dataAddress;
-	int i, j;
-	char * passReply;
-	char * chptr;
-	char retrCommand[500];
-	int rc;
-
-	if (write(sock, "PASV\r\n", 6) != 6) {
-		return FTPERR_SERVER_IO_ERROR;
-	}
-	if ((rc = ftp_check_response(sock, &passReply)))
-		return FTPERR_PASSIVE_ERROR;
-
-	chptr = passReply;
-	while (*chptr && *chptr != '(') chptr++;
-	if (*chptr != '(') return FTPERR_PASSIVE_ERROR; 
-	chptr++;
-	passReply = chptr;
-	while (*chptr && *chptr != ')') chptr++;
-	if (*chptr != ')') return FTPERR_PASSIVE_ERROR;
-	*chptr-- = '\0';
-
-	while (*chptr && *chptr != ',') chptr--;
-	if (*chptr != ',') return FTPERR_PASSIVE_ERROR;
-	chptr--;
-	while (*chptr && *chptr != ',') chptr--;
-	if (*chptr != ',') return FTPERR_PASSIVE_ERROR;
-	*chptr++ = '\0';
-    
-	/* now passReply points to the IP portion, and chptr points to the
-	   port number portion */
-
-	dataAddress.sin_family = AF_INET;
-	if (sscanf(chptr, "%d,%d", &i, &j) != 2) {
-		return FTPERR_PASSIVE_ERROR;
-	}
-	dataAddress.sin_port = htons((i << 8) + j);
-
-	chptr = passReply;
-	while (*chptr++) {
-		if (*chptr == ',') *chptr = '.';
-	}
-
-	if (!inet_aton(passReply, &dataAddress.sin_addr)) 
-		return FTPERR_PASSIVE_ERROR;
-
-	dataSocket = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
-	if (dataSocket < 0) {
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	if (!param)
-		sprintf(retrCommand, "%s\r\n", command);
-	else
-		sprintf(retrCommand, "%s %s\r\n", command, param);
-	    
-	i = strlen(retrCommand);
-   
-	if (write(sock, retrCommand, i) != i) {
-		return FTPERR_SERVER_IO_ERROR;
-	}
-
-	if (connect(dataSocket, (struct sockaddr *) &dataAddress, 
-		    sizeof(dataAddress))) {
-		close(dataSocket);
-		return FTPERR_FAILED_DATA_CONNECT;
-	}
-
-	if ((rc = ftp_check_response(sock, NULL))) {
-		close(dataSocket);
-		return rc;
-	}
-
-	return dataSocket;
-}
-
-
-int ftp_get_filesize(int sock, char * remotename)
-{
-	int size = 0;
-	char buf[2000];
-	char file[500];
-	char * ptr;
-	int fd, rc, tot;
-	int i;
-
-	strcpy(buf, remotename);
-	ptr = strrchr(buf, '/');
-	if (!*ptr)
-		return -1;
-	*ptr = '\0';
-
-	strcpy(file, ptr+1);
-
-	if ((rc = ftp_command(sock, "CWD", buf))) {
-		return -1;
-	}
-
-	fd = ftp_data_command(sock, "LIST", file);
-	if (fd <= 0) {
-		close(sock);
-		return -1;
-	}
-
-	ptr = buf;
-	while ((tot = read(fd, ptr, sizeof(buf) - (ptr - buf) - 1)) != 0)
-		ptr += tot;
-	*ptr = '\0';
-	close(fd);
-
-	if (!(ptr = strstr(buf, file))) {
-		log_message("FTP/get_filesize: Bad mood, directory does not contain searched file (%s)", file);
-		if (ftp_end_data_command(sock))
-			close(sock);
-		return -1;
-	}
-
-	for (i=0; i<4; i++) {
-		while (*ptr && *ptr != ' ')
-			ptr--;
-		while (*ptr && *ptr == ' ')
-			ptr--;
-	}
-	while (*ptr && *ptr != ' ')
-		ptr--;
-
-	if (ptr)
-		size = charstar_to_int(ptr+1);
-	else
-		size = 0;
-
-	if (ftp_end_data_command(sock)) {
-		close(sock);
-		return -1;
-	}
-
-	return size;
-}
-
-
-int ftp_start_download(int sock, char * remotename, int * size)
-{
-	if ((*size = ftp_get_filesize(sock, remotename)) == -1) {
-		log_message("FTP: could not get filesize (trying to continue)");
-		*size = 0;
-	}
-	return ftp_data_command(sock, "RETR", remotename);
-}
-
-
-int ftp_end_data_command(int sock)
-{
-	if (ftp_check_response(sock, NULL))
-		return FTPERR_BAD_SERVER_RESPONSE;
-	
-	return 0;
-}
-
-
-char *str_ftp_error(int error)
-{
-	return error == FTPERR_PASSIVE_ERROR ? "error with passive connection" :
-	       error == FTPERR_FAILED_CONNECT ? "couldn't connect to server" :
-	       error == FTPERR_FILE_NOT_FOUND ? "file not found" :
-	       error == FTPERR_BAD_SERVER_RESPONSE ? "bad server response (server too busy?)" :
-	       NULL;
-}
-
-
-int http_download_file(char * hostname, char * remotename, int * size, char * proxyprotocol, char * proxyname, char * proxyport)
-{
-	char * buf;
-	char headers[4096];
-	char * nextChar = headers;
-	int checkedCode;
-	struct in_addr serverAddress;
-	struct pollfd polls;
-	int sock;
-	int rc;
-	struct sockaddr_in destPort;
-	char * header_content_length = "Content-Length: ";
-	char * http_server_name;
-	int http_server_port;
-
-	if (proxyprotocol) {
-		http_server_name = proxyname;
-		http_server_port = atoi(proxyport);
-	} else {
-		http_server_name = hostname;
-		http_server_port = 80;
-	}		
-
-	log_message("HTTP: connecting to server %s:%i (%s)",
-		    http_server_name, http_server_port,
-		    proxyprotocol ? "proxy" : "no proxy");
-
-	if ((rc = get_host_address(http_server_name, &serverAddress))) return rc;
-
-	sock = socket(AF_INET, SOCK_STREAM, IPPROTO_IP);
-	if (sock < 0) {
-		return FTPERR_FAILED_CONNECT;
-	}
-
-	destPort.sin_family = AF_INET;
-	destPort.sin_port = htons(http_server_port);
-	destPort.sin_addr = serverAddress;
-
-	if (connect(sock, (struct sockaddr *) &destPort, sizeof(destPort))) {
-		close(sock);
-		return FTPERR_FAILED_CONNECT;
-	}
-
-        buf = proxyprotocol ? asprintf_("GET %s://%s%s HTTP/0.9\r\nHost: %s\r\n\r\n", proxyprotocol, hostname, remotename, hostname)
-                            : asprintf_("GET %s HTTP/0.9\r\nHost: %s\r\n\r\n", remotename, hostname);
-
-	write(sock, buf, strlen(buf));
-
-	/* This is fun; read the response a character at a time until we:
-
-	   1) Get our first \r\n; which lets us check the return code
-	   2) Get a \r\n\r\n, which means we're done */
-
-	*nextChar = '\0';
-	checkedCode = 0;
-	while (!strstr(headers, "\r\n\r\n")) {
-		polls.fd = sock;
-		polls.events = POLLIN;
-		rc = poll(&polls, 1, TIMEOUT_SECS*1000);
-
-		if (rc == 0) {
-			close(sock);
-			return FTPERR_SERVER_TIMEOUT;
-		} else if (rc < 0) {
-			close(sock);
-			return FTPERR_SERVER_IO_ERROR;
-		}
-
-		if (read(sock, nextChar, 1) != 1) {
-			close(sock);
-			return FTPERR_SERVER_IO_ERROR;
-		}
-
-		nextChar++;
-		*nextChar = '\0';
-
-		if (nextChar - headers == sizeof(headers)) {
-			close(sock);
-			return FTPERR_SERVER_IO_ERROR;
-		}
-
-		if (!checkedCode && strstr(headers, "\r\n")) {
-			char * start, * end;
-
-			checkedCode = 1;
-			start = headers;
-			while (!isspace(*start) && *start) start++;
-			if (!*start) {
-				close(sock);
-				return FTPERR_SERVER_IO_ERROR;
-			}
-			start++;
-
-			end = start;
-			while (!isspace(*end) && *end) end++;
-			if (!*end) {
-				close(sock);
-				return FTPERR_SERVER_IO_ERROR;
-			}
-
-			*end = '\0';
-                        log_message("HTTP: server response '%s'", start);
-			if (!strcmp(start, "404")) {
-				close(sock);
-				return FTPERR_FILE_NOT_FOUND;
-			} else if (strcmp(start, "200")) {
-				close(sock);
-				return FTPERR_BAD_SERVER_RESPONSE;
-			}
-
-			*end = ' ';
-		}
-	}
-
-	if ((buf = strstr(headers, header_content_length)))
-		*size = charstar_to_int(buf + strlen(header_content_length));
-	else
-		*size = 0;
-
-	return sock;
-}
diff --git a/mdk-stage1/url.h b/mdk-stage1/url.h
deleted file mode 100644
index 7a9dcfb4b..000000000
--- a/mdk-stage1/url.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 Mandrakesoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * Portions from Erik Troan <ewt@redhat.com> and Matt Wilson <msw@redhat.com>
- *
- * Copyright 1999 Red Hat, Inc.
- *
- */
-
-#ifndef _URL_H_
-#define _URL_H_
-
-int ftp_open_connection(char * host, char * name, char * password, char * proxy);
-int ftp_get_filesize(int sock, char * remotename);
-int ftp_start_download(int sock, char * remotename, int * size);
-int ftp_end_data_command(int sock);
-char *str_ftp_error(int error);
-
-int http_download_file(char * hostname, char * remotename, int * size, char * proxyprotocol, char * proxyname, char * proxyport);
-
-
-#define FTPERR_BAD_SERVER_RESPONSE   -1
-#define FTPERR_SERVER_IO_ERROR       -2
-#define FTPERR_SERVER_TIMEOUT        -3
-#define FTPERR_BAD_HOST_ADDR         -4
-#define FTPERR_BAD_HOSTNAME          -5
-#define FTPERR_FAILED_CONNECT        -6
-#define FTPERR_FILE_IO_ERROR         -7
-#define FTPERR_PASSIVE_ERROR         -8
-#define FTPERR_FAILED_DATA_CONNECT   -9
-#define FTPERR_FILE_NOT_FOUND        -10
-#define FTPERR_UNKNOWN               -100
-
-#endif
diff --git a/mdk-stage1/usb-resource/.cvsignore b/mdk-stage1/usb-resource/.cvsignore
deleted file mode 100644
index a7d0cfa9a..000000000
--- a/mdk-stage1/usb-resource/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-usb-ids.h
diff --git a/mdk-stage1/usb-resource/Makefile b/mdk-stage1/usb-resource/Makefile
deleted file mode 100644
index a5bd19cff..000000000
--- a/mdk-stage1/usb-resource/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
- #******************************************************************************
- #
- # $Id$
- #
- # Guillaume Cottenceau (gc@mandrakesoft.com)
- #
- # Copyright 2000 Mandrakesoft
- #
- # This software may be freely redistributed under the terms of the GNU
- # public license.
- #
- # You should have received a copy of the GNU General Public License
- # along with this program; if not, write to the Free Software
- # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- #
- #*****************************************************************************
-
-
-all: usb-ids.h
-
-usb-ids.h: /usr/share/ldetect-lst/usbtable update-usb-ids.pl
-	perl update-usb-ids.pl > $@ || rm -f $@
-
-clean:
-	rm -f usb-ids.h
diff --git a/mdk-stage1/usb-resource/update-usb-ids.pl b/mdk-stage1/usb-resource/update-usb-ids.pl
deleted file mode 100755
index 749d09d7e..000000000
--- a/mdk-stage1/usb-resource/update-usb-ids.pl
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use MDK::Common;
-
-require '/usr/bin/merge2pcitable.pl';
-my $pci = read_pcitable("/usr/share/ldetect-lst/pcitable");
-my $usb = read_pcitable("/usr/share/ldetect-lst/usbtable");
-
-print '
-
-
-struct usb_module_map {
-	unsigned short	vendor;     /* vendor */
-	unsigned short	id;         /* device */
-	const char      *name;      /* human readable name */
-	const char      *module;    /* module to load */
-};
-
-';
-
-print "struct pci_module_map usb_pci_ids[] = {
-
-";
-
-foreach my $k (sort keys %$pci) {
-    my $v = $pci->{$k};
-    $v->[0] =~ /^usb-|^ehci-hcd|^ohci1394/ or next;
-    $k =~ /^(....)(....)/;
-    printf qq|\t{ 0x%s, 0x%s, "", "%s" },\n|,
-      $1, $2, $v->[0];
-}
-
-print "};
-int usb_num_ids=sizeof(usb_pci_ids)/sizeof(struct pci_module_map);
-";
-
-print "struct usb_module_map usb_usb_ids[] = {
-";
-
-my @modules = chomp_(`perl ../../kernel/modules.pl pci_modules4stage1 "network/usb disk/usb"`);
-
-    foreach my $k (sort keys %$usb) {
-	my $v = $usb->{$k};
-	member($v->[0], @modules) or next;
-	$k =~ /^(....)(....)/;
-	printf qq|\t{ 0x%s, 0x%s, "%s", "%s" },\n|,
-	  $1, $2, $v->[1], $v->[0];
-    }
-
-    print "};
-int usb_usb_num_ids=sizeof(usb_usb_ids)/sizeof(struct usb_module_map);
-";
diff --git a/mdk-stage1/wireless.c b/mdk-stage1/wireless.c
deleted file mode 100644
index c241bd662..000000000
--- a/mdk-stage1/wireless.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Olivier Blin (oblin@mandriva.com)
- *
- * Copyright 2005 Mandriva
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <sys/socket.h>
-#include <errno.h>
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-#include <linux/wireless.h>
-
-#include "automatic.h"
-#include "stage1.h"
-#include "log.h"
-#include "wireless.h"
-
-static int wireless_open_socket();
-static int wireless_close_socket(int socket);
-static int wireless_ioctl(int socket, const char *ifname, int request, struct iwreq *wrq);
-static int wireless_is_aware(int socket, const char *ifname);
-static int wireless_set_mode_managed(int socket, const char *ifname);
-static int wireless_disable_key(int socket, const char *ifname);
-static int wireless_set_restricted_key(int socket, const char *ifname, const char *key);
-static int wireless_set_essid(int socket, const char *ifname, const char *essid);
-
-static int wireless_open_socket()
-{
-	return socket(AF_INET, SOCK_DGRAM, 0);
-}
-
-static int wireless_close_socket(int socket)
-{
-	return close(socket);
-}
-
-static int wireless_ioctl(int socket, const char *ifname, int request, struct iwreq *wrq)
-{
-	strncpy(wrq->ifr_name, ifname, IFNAMSIZ);
-	return ioctl(socket, request, wrq);
-}
-
-static int wireless_is_aware(int socket, const char *ifname)
-{
-	struct iwreq wrq;
-	return wireless_ioctl(socket, ifname, SIOCGIWNAME, &wrq) == 0;
-}
-
-static int wireless_set_mode_managed(int socket, const char *ifname)
-{
-	struct iwreq wrq;
-
-	wrq.u.mode = IW_MODE_INFRA; /* managed */
-
-	return wireless_ioctl(socket, ifname, SIOCSIWMODE, &wrq) == 0;
-}
-
-static int wireless_set_essid(int socket, const char *ifname, const char *essid)
-{
-	struct iwreq wrq;
-
-	wrq.u.essid.flags = 1;
-	wrq.u.essid.pointer = (void *) essid;
-	wrq.u.essid.length = strlen(essid) + 1;
-
-	return wireless_ioctl(socket, ifname, SIOCSIWESSID, &wrq) == 0;
-}
-
-static int wireless_disable_key(int socket, const char *ifname)
-{
-	struct iwreq wrq;
-
-	wrq.u.data.flags = IW_ENCODE_DISABLED;
-	wrq.u.data.pointer = NULL;
-	wrq.u.data.length = 0;
-
-	return wireless_ioctl(socket, ifname, SIOCSIWENCODE, &wrq) == 0;
-}
-
-static int wireless_set_restricted_key(int socket, const char *ifname, const char *key)
-{
-	struct iwreq wrq;
-	char real_key[IW_ENCODING_TOKEN_MAX];
-	int key_len = 0;
-	unsigned int tmp;
-
-	while (sscanf(key + 2*key_len, "%2X", &tmp) == 1)
-		real_key[key_len++] = (char) tmp;
-
-	wrq.u.data.flags = IW_ENCODE_RESTRICTED;
-	wrq.u.data.pointer = (char *) real_key;
-	wrq.u.data.length = key_len;
-
-	return wireless_ioctl(socket, ifname, SIOCSIWENCODE, &wrq) == 0;
-}
-
-enum return_type configure_wireless(const char *ifname)
-{
-	enum return_type results;
-	char * questions[] = { "ESSID", "WEP key", NULL };
-	char * questions_auto[] = { "essid", "wep_key" };
-	static char ** answers = NULL;
-	int wsock = wireless_open_socket();
-
-	if (!wireless_is_aware(wsock, ifname)) {
-		log_message("interface %s doesn't support wireless", ifname);
-		wireless_close_socket(wsock);
-		return RETURN_OK;
-	}
-
-	results = ask_from_entries_auto("Please enter your wireless settings. "
-                                        "The ESSID is your wireless network identifier. "
-                                        "The WEP key must be entered in hexadecimal, without any separator.",
-					questions, &answers, 32, questions_auto, NULL);
-	if (results != RETURN_OK) {
-		wireless_close_socket(wsock);
-		return RETURN_BACK;
-	}
-
-	if (!wireless_set_mode_managed(wsock, ifname)) {
-		stg1_error_message("unable to set mode Managed on device \"%s\": %s", ifname, strerror(errno));
-		wireless_close_socket(wsock);
-		return RETURN_ERROR;
-	}
-
-	if (answers[1] && !streq(answers[1], "")) {
-		log_message("setting WEP key \"%s\" on device \"%s\"", answers[1], ifname);
-		if (!wireless_set_restricted_key(wsock, ifname, answers[1])) {
-			stg1_error_message("unable to set WEP key \"%s\" on device \"%s\": %s", answers[1], ifname, strerror(errno));
-			return RETURN_ERROR;
-		}
-	} else {
-		log_message("disabling WEP key on device \"%s\"", ifname);
-		if (!wireless_disable_key(wsock, ifname)) {
-			stg1_error_message("unable to disable WEP key on device \"%s\": %s", ifname, strerror(errno));
-			return RETURN_ERROR;
-		}
-	}
-
-        /* most devices perform discovery when ESSID is set, it needs to be last */
-	log_message("setting ESSID \"%s\" on device \"%s\"", answers[0], ifname);
-	if (!wireless_set_essid(wsock, ifname, answers[0])) {
-		stg1_error_message("unable to set ESSID \"%s\" on device \"%s\": %s", answers[0], ifname, strerror(errno));
-		return RETURN_ERROR;
-	}
-
-	wireless_close_socket(wsock);
-	return RETURN_OK;
-}
diff --git a/mdk-stage1/wireless.h b/mdk-stage1/wireless.h
deleted file mode 100644
index 36f247b23..000000000
--- a/mdk-stage1/wireless.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Olivier Blin (oblin@mandriva.com)
- *
- * Copyright 2005 Mandriva
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _WIRELESS_H_
-#define _WIRELESS_H_
-
-#include "frontend.h"
-
-enum return_type configure_wireless(const char *ifname);
-
-#endif
diff --git a/move/.cvsignore b/move/.cvsignore
deleted file mode 100644
index 0600e5070..000000000
--- a/move/.cvsignore
+++ /dev/null
@@ -1,4 +0,0 @@
-runlevel_set
-*.rdz
-xwait
-.perl_checker.cache
diff --git a/move/Makefile b/move/Makefile
deleted file mode 100644
index 7571c6e83..000000000
--- a/move/Makefile
+++ /dev/null
@@ -1,159 +0,0 @@
-DEST = /tmp
-DEST_LIVETREE = $(DEST)/live_tree
-DEST_STAGE2 = $(DEST_LIVETREE)/usr/lib/stage2
-
-ISO = /tmp/mdkmove.iso
-
-DATA_FILES = devices symlinks directories-to-create etcfiles all-etcfiles keyfiles \
-             BOOT-800-MOVE.jpg BOOT-1024-MOVE.jpg BOOT-1280-MOVE.jpg BOOT-1600-MOVE.jpg
-
-PROGRAM_FILES = etc-monitorer.pl tree/startkde_move tree/wait4x tree/netscape tree/alsa_default.pl
-LANG_FILES = $(shell perl -ne 'print $$1 if /ALLOWED_LANGS = qw\((.*)\)/' move.pm)
-
-STAGE1 = ../mdk-stage1
-INSTALL = ../perl-install
-
-INSTALL_FILES = install2.pm install_steps.pm install_any.pm install_interactive.pm install_steps_gtk.pm install_steps_interactive.pm install_messages.pm install_gtk.pm
-
-ARCH := $(shell arch | egrep "(x86_64|sparc64|s390x)")
-ifneq ("x$(ARCH)", "x")
-LIB_NAME = lib64
-else
-LIB_NAME = lib
-endif
-
-.PHONY: iso 
-
-default: install
-
-get_dest_livetree:
-	@echo -n $(DEST_LIVETREE)
-
-iso: build install live_tree_boot big_clps only_iso
-
-
-build: stage1 xwait runlevel_set
-	$(MAKE) -C ../perl-install mo_files
-
-data/isolinux-graphic.bmp.parameters: data/isolinux-graphic.bmp
-	perl -I $(INSTALL) $(INSTALL)/standalone/draksplash2 --kernel isolinux/vmlinuz --initrd isolinux/all.rdz $<
-
-data/i18n_en.list:
-	cd data ; ./make_i18n_list $(DEST_LIVETREE)
-
-install: un_live_tree_boot data/i18n_en.list
-	sudo ./collect-directories-to-create.pl $(DEST_LIVETREE) > data/directories-to-create
-	sudo find $(DEST_LIVETREE)/etc -type f | perl -pe 's|$(DEST_LIVETREE)||' > data/all-etcfiles
-
-	sudo cp -f $(STAGE1)/init-move $(DEST_LIVETREE)/sbin/init
-
-	$(MAKE) -C ../perl-install/share/po install NAME=libDrakX DATADIR=$(DEST_LIVETREE)/usr/share
-
-	sudo cp -f xwait $(DEST_LIVETREE)/usr/bin
-	sudo cp -f runlevel_set $(DEST_LIVETREE)/usr/bin
-	sudo cp -f runstage2 $(DEST_LIVETREE)/usr/bin/runstage2.pl
-	sudo rm -rf $(DEST_STAGE2)
-	sudo mkdir -p $(DEST_STAGE2)
-	sudo sh -c 'echo 1 > $(DEST_STAGE2)/help.pm'
-	sudo cp -f *.pm $(DEST_STAGE2)
-	sudo cp -f $(addprefix $(INSTALL)/, $(INSTALL_FILES)) $(DEST_STAGE2)
-	sudo cp -f $(PROGRAM_FILES) $(DEST_LIVETREE)/usr/bin
-	sudo rm -f $(DEST_LIVETREE)/usr/bin/{halt,reboot}  #- symlinks to consolehelper
-	sudo cp -f tree/{halt,reboot} $(DEST_LIVETREE)/usr/bin
-	sudo cp -f tree/X_move $(DEST_LIVETREE)/usr/X11R6/bin
-	sudo cp -f tree/sound.initscript $(DEST_LIVETREE)/etc/init.d/sound
-
-	sudo rm -rf $(DEST_LIVETREE)/usr/share/langs
-	sudo mkdir -p $(DEST_LIVETREE)/usr/share/langs
-	sudo cp -f $(INSTALL)/pixmaps/langs/lang-*.png $(DEST_LIVETREE)/usr/share/langs
-
-	 #- overwrite /usr/lib/libDrakX files of the live tree with those in CVS
-	(cd $(DEST_LIVETREE)/usr/lib/libDrakX ; find -name "*.pm") | egrep -v 'ctxhelp|drakfirsttime' | (cd $(INSTALL) ; sudo cpio -pLumd $(DEST_LIVETREE)/usr/lib/libDrakX/)
-
-	 #- overwrite stuff.so of drakxtools because it doesn't contain C_DRAKX stuff
-	sudo cp -f ../perl-install/c/blib/arch/auto/stuff/stuff.so $(DEST_LIVETREE)/usr/lib/libDrakX/auto/c/stuff
-
-	 #- overwrite MDK-Common
-#	sudo cp -f ../../soft/perl-MDK-Common/MDK/Common/*.pm $(DEST_LIVETREE)/usr/$(LIB_NAME)/perl5/vendor_perl/*/MDK/Common
-
-	 #- duplicated :(
-	sudo perl -pi -e 's/#[-+].*//; $$_ = "\n" if (/^=(head|begin)/ .. /^=cut/) || /use (diagnostics|vars|strict)/' $(DEST_STAGE2)/*.pm `find $(DEST_LIVETREE)/usr/lib/libDrakX -name "*.pm"`
-
-	sudo mkdir -p $(DEST_LIVETREE)/move
-	sudo cp -f $(addprefix data/, $(DATA_FILES)) $(DEST_LIVETREE)/move
-
-	sudo install -m 440 tree/sudoers $(DEST_LIVETREE)/etc
-	sudo install -m 644 tree/mdk_move_boot_loop.desktop $(DEST_LIVETREE)/usr/share/autostart
-	sudo install tree/{mdk_move_loop,mdk_totem,mdk_behind_totem} $(DEST_LIVETREE)/usr/bin
-	sudo install -m 644 -D tree/mdk_totem.desktop $(DEST_LIVETREE)/usr/share/apps/kdesktop/DesktopLinks/mdk_totem.desktop
-	sudo install -m 644 tree/{kdedrc,konsolerc} $(DEST_LIVETREE)/usr/share/config
-	sudo install -m 644 img/Mandrake.png $(DEST_LIVETREE)/usr/share/mdk/backgrounds
-	sudo install -m 644 img/FE* $(DEST_LIVETREE)/usr/share/wallpapers
-
-	grep ChangeLog $(INSTALL)/CVS/Entries > /tmp/version
-	sudo cp -f /tmp/version $(DEST_LIVETREE)/usr/share/VERSION
-
-un_live_tree_boot:
-	sudo ./make_live_tree_boot -u $(DEST_LIVETREE)
-	sudo tools/fix-fc-cache.pl $(DEST_LIVETREE)
-
-live_tree_boot:
-	rm -f $(DEST)/live_tree*.clp
-	sudo ./make_live_tree_boot $(DEST_LIVETREE)
-	sudo tools/fix-fc-cache.pl $(DEST_LIVETREE)
-	$(MAKE) clps
-
-clps:
-	$(MAKE) $(DEST)/live_tree_always.clp
-	$(MAKE) $(DEST)/live_tree_boot.clp
-	$(MAKE) $(DEST)/live_tree_totem.clp
-	-$(MAKE) $(DEST)/live_tree_nvidia.clp
-	for i in en fr de it es; do $(MAKE) $(DEST)/live_tree_i18n_$$i.clp $(DEST)/live_tree_always_i18n_$$i.clp; done
-
-big_clps:
-	$(MAKE) $(DEST)/live_tree.clp
-
-
-only_iso:
-	rm -rf $(DEST)/iso
-	mkdir $(DEST)/iso
-	cp -a isolinux $(DEST)/iso
-	rm -rf $(DEST)/iso/isolinux/CVS
-
-	mv $(DEST)/*.clp $(DEST)/iso
-
-	touch $(DEST)/iso/isolinux/boot.cat
-	find $(DEST)/iso/isolinux -type f -printf '%p 100\n' > $(DEST)/iso.sort ; echo '$(DEST)/iso/live_tree_boot.clp 5' >> $(DEST)/iso.sort
-#	download version: MOVE10DO
-#	complete version: MOVE10IN
-	mkisofs -r -J -hide-rr-moved -nobak -cache-inodes -publisher Mandrakesoft -V 'Move' -volset MOVE10IN -b isolinux/isolinux.bin -c isolinux/boot.cat -sort $(DEST)/iso.sort -no-emul-boot -boot-load-size 4 -boot-info-table -o $(ISO) $(DEST)/iso
-	mv $(DEST)/iso/*.clp $(DEST)
-	mkcd --addmd5 $(ISO)
-#	cdrecord -v -eject dev=0,0,0 blank=fast gracetime=2 speed=99 $(ISO)
-#	ftp://a:a@leia//BIG/mdkmove.iso
-
-
-stage1:
-	cd $(STAGE1) && ADDITIONAL_DEFS="-DMANDRAKE_MOVE" MOVE=1 make dirs init stage1-full init-move
-	cd .. ; ./make_boot_img move
-
-xwait: %: %.c
-	$(CC) $(CFLAGS) $< -L/usr/X11R6/$(LIB_NAME) -lX11 -o $@
-
-runlevel_set: %: %.c
-	$(CC) $(CFLAGS) $< -o $@
-
-clean:
-	rm -f xwait
-
-%.clp: %
-	if [ -e $<.sort ]; then \
-	sudo mkisofs -R -sort $<.sort $< | create_compressed_fs - 65536 $@ 2000 2>/dev/null ; \
-	else \
-	sudo mkisofs -R $< | create_compressed_fs - 65536 $@ 2000 2>/dev/null ; \
-	fi
-
-check_dirs:
-	for i in `cat data/*.dirs`; do grep "^$$i/" data/*.list && echo "$$i"; done ||:
-
-# perl tools/busy-files-accesses --no-link --no-dir --full-dirs 'data/always.dirs data/boot.dirs data/totem.dirs' --already-have data/always.list
diff --git a/move/collect-directories-to-create.pl b/move/collect-directories-to-create.pl
deleted file mode 100755
index 7a5cfd283..000000000
--- a/move/collect-directories-to-create.pl
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use MDK::Common;
-
-#- there are programs/packages which fail when the directory
-#- in which they try to write doesn't exist. better collect them
-#- at build time so that drakx startup can create them.
-
-chdir $ARGV[0];
-foreach (`find etc var -type d`) {
-    chomp;
-    my @l = stat($_);
-    printf "%o %d %d %s\n", $l[2] & 07777, $l[4], $l[5], $_;
-}
diff --git a/move/data/.cvsignore b/move/data/.cvsignore
deleted file mode 100644
index 1420fea7c..000000000
--- a/move/data/.cvsignore
+++ /dev/null
@@ -1,4 +0,0 @@
-all-etcfiles
-directories-to-create
-i18n_*.list
-
diff --git a/move/data/BOOT-1024-MOVE.jpg b/move/data/BOOT-1024-MOVE.jpg
deleted file mode 100644
index 819268432..000000000
--- a/move/data/BOOT-1024-MOVE.jpg
+++ /dev/null
diff --git a/move/data/BOOT-1280-MOVE.jpg b/move/data/BOOT-1280-MOVE.jpg
deleted file mode 100644
index 705184942..000000000
--- a/move/data/BOOT-1280-MOVE.jpg
+++ /dev/null
diff --git a/move/data/BOOT-1600-MOVE.jpg b/move/data/BOOT-1600-MOVE.jpg
deleted file mode 100644
index d96935f18..000000000
--- a/move/data/BOOT-1600-MOVE.jpg
+++ /dev/null
diff --git a/move/data/BOOT-800-MOVE.jpg b/move/data/BOOT-800-MOVE.jpg
deleted file mode 100644
index 197c64e27..000000000
--- a/move/data/BOOT-800-MOVE.jpg
+++ /dev/null
diff --git a/move/data/always.dirs b/move/data/always.dirs
deleted file mode 100644
index e69de29bb..000000000
--- a/move/data/always.dirs
+++ /dev/null
diff --git a/move/data/always.list b/move/data/always.list
deleted file mode 100644
index 1ccb2f96d..000000000
--- a/move/data/always.list
+++ /dev/null
@@ -1,143 +0,0 @@
-/bin/bash
-/bin/mount
-/bin/umount
-/etc/ld.so.cache
-/etc/nsswitch.conf
-/lib/ld-2.3.3.so
-/lib/ld-linux.so.2
-/lib/libc-2.3.3.so
-/lib/libc.so.6
-/lib/libdl-2.3.3.so
-/lib/libdl.so.2
-/lib/libgcc_s-3.3.2.so.1
-/lib/libm-2.3.3.so
-/lib/libm.so.6
-/lib/libnsl-2.3.3.so
-/lib/libnss_dns-2.3.3.so
-/lib/libnss_files-2.3.3.so
-/lib/libnss_nis-2.3.3.so
-/lib/libnss_nisplus-2.3.3.so
-/lib/libpam.so.0.77
-/lib/libpam_misc.so.0.77
-/lib/libpopt.so.0.0.0
-/lib/libpthread-0.10.so
-/lib/libpthread.so.0
-/lib/libresolv-2.3.3.so
-/lib/librt-2.3.3.so
-/lib/librt.so.1
-/lib/libtermcap.so.2
-/lib/libtermcap.so.2.0.8
-/lib/libthread_db-1.0.so
-/lib/libutil-2.3.3.so
-/lib/libz.so.1.2.1
-/lib/security/pam_console_apply_devfsd.so
-/sbin/cardmgr
-/sbin/devfsd
-/sbin/init
-/sbin/klogd
-/sbin/losetup
-/sbin/syslogd
-/usr/X11R6/bin/XFree86
-/usr/X11R6/bin/X_move
-/usr/X11R6/bin/xfs
-/usr/X11R6/bin/xwait
-/usr/X11R6/lib/X11/fonts/75dpi/helvB12-ISO8859-1.pcf.gz
-/usr/X11R6/lib/X11/fonts/75dpi/helvB12.pcf.gz
-/usr/X11R6/lib/X11/locale/lib/common/ximcp.so.2
-/usr/X11R6/lib/X11/locale/lib/common/xlcDef.so.2
-/usr/X11R6/lib/X11/locale/lib/common/xomGeneric.so.2
-/usr/X11R6/lib/libGL.so.1.2
-/usr/X11R6/lib/libICE.so.6.3
-/usr/X11R6/lib/libSM.so.6.0
-/usr/X11R6/lib/libX11.so.6.2
-/usr/X11R6/lib/libXcursor.so.1.0
-/usr/X11R6/lib/libXext.so.6.4
-/usr/X11R6/lib/libXfont.so.1.4
-/usr/X11R6/lib/libXft.so.2.1.1
-/usr/X11R6/lib/libXi.so.6.0
-/usr/X11R6/lib/libXinerama.so.1.0
-/usr/X11R6/lib/libXmu.so.6.2
-/usr/X11R6/lib/libXrandr.so.2.0
-/usr/X11R6/lib/libXrender.so.1.2.2
-/usr/X11R6/lib/libXss.so.1.0
-/usr/X11R6/lib/libXt.so.6.0
-/usr/X11R6/lib/libXtst.so.6.1
-/usr/X11R6/lib/libaudio.so.2.3
-/usr/bin/artsd
-/usr/bin/dnotify
-/usr/bin/eject
-/usr/bin/kdeinit
-/usr/bin/krandrtray
-/usr/bin/kwrapper
-/usr/bin/magicdev
-/usr/bin/startkde
-/usr/bin/startkde_move
-/usr/bin/xwait
-/usr/lib/gconv/ISO8859-1.so
-/usr/lib/gconv/ISO8859-2.so
-/usr/lib/gconv/ISO8859-15.so
-/usr/lib/gtk-2.0/2.2.0/immodules/im-cedilla.so
-/usr/lib/kde3/clock_panelapplet.so
-/usr/lib/kde3/dcopserver.so
-/usr/lib/kde3/kded.so
-/usr/lib/kde3/kded_mountwatcher.so
-/usr/lib/kde3/kio_devices.so
-/usr/lib/kde3/kio_file.so
-/usr/lib/kde3/klauncher.so
-/usr/lib/kde3/kmix.so
-/usr/lib/kde3/knotify.so
-/usr/lib/kde3/konq_sound.so
-/usr/lib/kde3/ksmserver.so
-/usr/lib/kde3/kwin.so
-/usr/lib/kde3/kwin3_mandrake2.so
-/usr/lib/kde3/minipager_panelapplet.so
-/usr/lib/kde3/plugins/styles/galaxy.so
-/usr/lib/kde3/systemtray_panelapplet.so
-/usr/lib/kde3/taskbar_panelapplet.so
-/usr/lib/libDCOP.so.4.2.0
-/usr/lib/libart_lgpl_2.so.2.3.16
-/usr/lib/libartsflow.so.1.0.0
-/usr/lib/libartsflow_idl.so.1.0.0
-/usr/lib/libartskde.so.1.2.0
-/usr/lib/libasound.so.2.0.0
-/usr/lib/libaudiofile.so.0.0.2
-/usr/lib/libesd.so.0.2.32
-/usr/lib/libexpat.so.0.4.0
-/usr/lib/libfam.so.0.0.0
-/usr/lib/libfontconfig.so.1.0.4
-/usr/lib/libfreetype.so.6.3.5
-/usr/lib/libglib-2.0.so.0.200.3
-/usr/lib/libgmodule-2.0.so.0.200.3
-/usr/lib/libgthread-2.0.so.0.200.3
-/usr/lib/libjpeg.so.62.0.0
-/usr/lib/libkdecorations.so.1.0.0
-/usr/lib/libkdecore.so.4.2.0
-/usr/lib/libkdefx.so.4.2.0
-/usr/lib/libkdeinit_dcopserver.so
-/usr/lib/libkdeinit_kded.so
-/usr/lib/libkdeinit_klauncher.so
-/usr/lib/libkdeinit_kmix.so
-/usr/lib/libkdeinit_ksmserver.so
-/usr/lib/libkdeinit_kwin.so
-/usr/lib/libkdesu.so.4.2.0
-/usr/lib/libkdeui.so.4.2.0
-/usr/lib/libkio.so.4.2.0
-/usr/lib/libkmedia2_idl.so.1.0.0
-/usr/lib/libkonq.so.4.2.0
-/usr/lib/libkparts.so.2.1.0
-/usr/lib/libkutils.so.1.2.0
-/usr/lib/libmad.so.0.2.0
-/usr/lib/libmcop.so.1.0.0
-/usr/lib/libmng.so.1.0.0
-/usr/lib/libogg.so.0.5.0
-/usr/lib/libpng.so.3.1.2.5
-/usr/lib/libqtmcop.so.1.0.0
-/usr/lib/libsoundserver_idl.so.1.0.0
-/usr/lib/libstdc++.so.5.0.5
-/usr/lib/libtaskbar.so.1.2.0
-/usr/lib/libtaskmanager.so.1.0.0
-/usr/lib/libvorbis.so.0.3.0
-/usr/lib/libvorbisfile.so.3.1.0
-/usr/lib/qt3/lib/libqt-mt.so.3.2.3
-/usr/share/fonts/ttf/vera/Vera.ttf
-/usr/share/fonts/ttf/vera/VeraBd.ttf
diff --git a/move/data/always_i18n.list b/move/data/always_i18n.list
deleted file mode 100644
index 5edba2713..000000000
--- a/move/data/always_i18n.list
+++ /dev/null
@@ -1,33 +0,0 @@
-/usr/share/locale/__LANG__/LC_ADDRESS
-/usr/share/locale/__LANG__/LC_COLLATE
-/usr/share/locale/__LANG__/LC_CTYPE
-/usr/share/locale/__LANG__/LC_IDENTIFICATION
-/usr/share/locale/__LANG__/LC_MEASUREMENT
-/usr/share/locale/__LANG__/LC_MESSAGES/GConf2.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/SYS_LC_MESSAGES
-/usr/share/locale/__LANG__/LC_MESSAGES/glib20.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/gtk20.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/kdelibs.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/kdesktop.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/khotkeys.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/kicker.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/kio.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/kio_devices.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/kmix.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/knotify.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/krandr.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/ksmserver.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/ktaskbarapplet.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/kwin.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/libgnomeui-2.0.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/libkonq.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/libxine1.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/magicdev.mo
-/usr/share/locale/__LANG__/LC_MESSAGES/totem.mo
-/usr/share/locale/__LANG__/LC_MONETARY
-/usr/share/locale/__LANG__/LC_NAME
-/usr/share/locale/__LANG__/LC_NUMERIC
-/usr/share/locale/__LANG__/LC_PAPER
-/usr/share/locale/__LANG__/LC_TELEPHONE
-/usr/share/locale/__LANG__/LC_TIME
-/usr/share/services/ksycoca-__LANG__
diff --git a/move/data/boot.dirs b/move/data/boot.dirs
deleted file mode 100644
index c6c43e7db..000000000
--- a/move/data/boot.dirs
+++ /dev/null
@@ -1,39 +0,0 @@
-/etc/X11/fs
-/etc/X11/xserver
-/etc/dynamic/hooks
-/etc/pango
-/etc/profile.d
-/lib/modutils
-/usr/X11R6/lib/X11/locale/C
-/usr/X11R6/lib/modules/drivers/linux
-/usr/lib/libDrakX/Xconfig
-/usr/lib/libDrakX/auto/c
-/usr/lib/libDrakX/auto/xf86misc
-/usr/lib/libDrakX/c
-/usr/lib/libDrakX/printer
-/usr/lib/libDrakX/sbus_probing
-/usr/lib/libDrakX/xf86misc
-/usr/lib/perl5/5.8.3/Exporter
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/CORE
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/File
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/auto/File
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/auto/Socket
-/usr/lib/perl5/5.8.3/warnings
-/usr/lib/perl5/vendor_perl/5.8.3/MDK
-/usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi/Gtk2/Gdk
-/usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi/auto/Glib
-/usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi/auto/Gtk2
-/usr/lib/stage2
-/usr/share/applnk-mdk
-/usr/share/apps/kconf_update
-/usr/share/apps/kdisplay/app-defaults
-/usr/share/apps/khtml/css
-/usr/share/apps/knotify
-/usr/share/autostart
-/usr/share/icons/default
-/usr/share/langs
-/usr/share/mimelnk
-/usr/share/services/kaddressbook
-/usr/share/servicetypes
-/usr/share/themes/Default/gtk-2.0
-/usr/share/themes/Galaxy/gtk-2.0
diff --git a/move/data/boot.list b/move/data/boot.list
deleted file mode 100644
index 7919509cc..000000000
--- a/move/data/boot.list
+++ /dev/null
@@ -1,879 +0,0 @@
-/bin/basename
-/bin/cat
-/bin/chmod
-/bin/chown
-/bin/cp
-/bin/cut
-/bin/date
-/bin/egrep
-/bin/env
-/bin/gawk
-/bin/gettext
-/bin/grep
-/bin/gunzip
-/bin/hostname
-/bin/id
-/bin/loadkeys
-/bin/mkdir
-/bin/mktemp
-/bin/mv
-/bin/rm
-/bin/sed
-/bin/sort
-/bin/touch
-/bin/true
-/bin/uname
-/etc/DIR_COLORS
-/etc/X11/Xresources
-/etc/X11/Xsession
-/etc/X11/fs
-/etc/X11/wmsession.d/01KDE
-/etc/X11/wmsession.d/07IceWM
-/etc/X11/xdm/Xsession
-/etc/X11/xinit.d/Mod_Meta_L_Disable
-/etc/X11/xinit.d/menu
-/etc/X11/xinit.d/mountloop
-/etc/X11/xinit.d/numlock
-/etc/X11/xinit/XIM
-/etc/X11/xinit/fixkeyboard
-/etc/X11/xkb/compat/accessx
-/etc/X11/xkb/compat/basic
-/etc/X11/xkb/compat/complete
-/etc/X11/xkb/compat/iso9995
-/etc/X11/xkb/compat/misc
-/etc/X11/xkb/compat/mousekeys
-/etc/X11/xkb/compat/xfree86
-/etc/X11/xkb/geometry/pc
-/etc/X11/xkb/keycodes/aliases
-/etc/X11/xkb/keycodes/xfree86
-/etc/X11/xkb/rules/xfree86
-/etc/X11/xkb/rules/xfree86.lst
-/etc/X11/xkb/symbols/en_US
-/etc/X11/xkb/symbols/gb
-/etc/X11/xkb/symbols/iso9995-3
-/etc/X11/xkb/symbols/srvr_ctrl
-/etc/X11/xkb/symbols/us
-/etc/X11/xkb/types/basic
-/etc/X11/xkb/types/complete
-/etc/X11/xkb/types/extra
-/etc/X11/xkb/types/iso9995
-/etc/X11/xkb/types/mousekeys
-/etc/X11/xkb/types/pc
-/etc/X11/xkb/xkbcomp
-/etc/X11/xserver
-/etc/bash_completion
-/etc/bash_completion.d/netprofile
-/etc/bash_completion.d/urpmi
-/etc/bashrc
-/etc/cups/classes.conf
-/etc/cups/client.conf
-/etc/cups/command.types
-/etc/cups/cupsd.conf
-/etc/cups/mime.convs
-/etc/cups/mime.types
-/etc/cups/printers.conf
-/etc/cups/pstoraster.convs
-/etc/devfs/conf.d/dynamic.conf
-/etc/devfsd.conf
-/etc/dynamic/hooks
-/etc/dynamic/scripts/functions.script
-/etc/dynamic/scripts/lp.script
-/etc/dynamic/scripts/part.script
-/etc/filesystems
-/etc/fonts/fonts.conf
-/etc/fonts/local.conf
-/etc/group
-/etc/gtk-2.0/gdk-pixbuf.loaders
-/etc/gtk-2.0/gtk.immodules
-/etc/hotplug.d/default/default.hotplug
-/etc/hotplug/hotplug.functions
-/etc/imrc
-/etc/initlog.conf
-/etc/inputrc
-/etc/localtime
-/etc/mandrake-release
-/etc/modprobe.devfs
-/etc/pam.d/other
-/etc/pam.d/sudo
-/etc/pam.d/system-auth
-/etc/pam.d/xserver
-/etc/pango
-/etc/passwd
-/etc/profile
-/etc/profile.d
-/etc/rc.d/init.d/functions
-/etc/rc.d/init.d/mandrake_consmap
-/etc/rc.d/init.d/netfs
-/etc/rc.d/init.d/numlock
-/etc/rc.d/init.d/sound
-/etc/rc.d/init.d/syslog
-/etc/rc.d/init.d/xfs
-/etc/rc.d/rc.local
-/etc/rpc
-/etc/security/console.perms
-/etc/security/fileshare.conf
-/etc/security/pam_env.conf
-/etc/services
-/etc/sudoers
-/etc/syslog.conf
-/etc/termcap
-/etc/tmdns.conf
-/etc/xdg/menus/applications-merged-simplified/applications-simplified-configure.menu
-/etc/xdg/menus/applications-simplified.menu
-/etc/xdg/menus/kontact.menu
-/etc/xdg/menus/mdk-configure-kde.menu
-/lib/libblkid.so.1.0
-/lib/libcom_err.so.2.1
-/lib/libcrypt-2.3.3.so
-/lib/libe2p.so.2.3
-/lib/libext2fs.so.2.4
-/lib/libintl.so.2.4.1
-/lib/libpcre.so.0.0.1
-/lib/libproc.so.3.1.15
-/lib/libuuid.so.1.2
-/lib/module-init-tools/modprobe.compat
-/lib/module-init-tools/modprobe.default
-/lib/security/pam_console.so
-/lib/security/pam_cracklib.so
-/lib/security/pam_deny.so
-/lib/security/pam_env.so
-/lib/security/pam_limits.so
-/lib/security/pam_permit.so
-/lib/security/pam_rootok.so
-/lib/security/pam_stack.so
-/lib/security/pam_unix.so
-/move/BOOT-800-MOVE.jpg
-/move/all-etcfiles
-/move/directories-to-create
-/move/etcfiles
-/sbin/chkconfig
-/sbin/consoletype
-/sbin/generate-modprobe.conf
-/sbin/hotplug
-/sbin/initlog
-/sbin/mkdosfs
-/sbin/mke2fs
-/sbin/modprobe-25
-/sbin/pam_console_apply
-/sbin/rmmod-25
-/sbin/runlevel
-/sbin/service
-/sbin/sysctl
-/usr/X11R6/bin/Xwrapper
-/usr/X11R6/bin/enable_X11_numlock
-/usr/X11R6/bin/iceauth
-/usr/X11R6/bin/setxkbmap
-/usr/X11R6/bin/xdpyinfo
-/usr/X11R6/bin/xmodmap
-/usr/X11R6/bin/xrdb
-/usr/X11R6/bin/xset
-/usr/X11R6/bin/xsetroot
-/usr/X11R6/lib/X11/XErrorDB
-/usr/X11R6/lib/X11/XKeysymDB
-/usr/X11R6/lib/X11/locale/C
-/usr/X11R6/lib/X11/locale/compose.dir
-/usr/X11R6/lib/X11/locale/iso8859-1/Compose
-/usr/X11R6/lib/X11/locale/iso8859-1/XI18N_OBJS
-/usr/X11R6/lib/X11/locale/iso8859-1/XLC_LOCALE
-/usr/X11R6/lib/X11/locale/locale.alias
-/usr/X11R6/lib/X11/locale/locale.dir
-/usr/X11R6/lib/X11/rgb.txt
-/usr/X11R6/lib/libXm.so.2.0.1
-/usr/X11R6/lib/libXmuu.so.1.0
-/usr/X11R6/lib/libXp.so.6.2
-/usr/X11R6/lib/libXxf86misc.so.1.0
-/usr/X11R6/lib/libXxf86vm.so.1.0
-/usr/X11R6/lib/modules/drivers/linux
-/usr/X11R6/lib/modules/fonts/libbitmap.a
-/usr/X11R6/lib/modules/fonts/libfreetype.a
-/usr/X11R6/lib/modules/fonts/libtype1.a
-/usr/X11R6/lib/modules/input/mouse_drv.o
-/usr/X11R6/lib/modules/libfb.a
-/usr/X11R6/lib/modules/libpcidata.a
-/usr/X11R6/lib/modules/libramdac.a
-/usr/X11R6/lib/modules/libvgahw.a
-/usr/bin/cpp-3.3.2
-/usr/bin/dcopserver_shutdown
-/usr/bin/dircolors
-/usr/bin/dumpkeys
-/usr/bin/expr
-/usr/bin/getent
-/usr/bin/head
-/usr/bin/kab2kabc
-/usr/bin/killall
-/usr/bin/krootwarning
-/usr/bin/ksplash
-/usr/bin/lnusertemp
-/usr/bin/locale
-/usr/bin/mandrakegalaxy
-/usr/bin/mandrakegalaxy.real
-/usr/bin/mdk_move_loop
-/usr/bin/nspluginscan
-/usr/bin/perl5.8.3
-/usr/bin/qiv
-/usr/bin/runlevel_set
-/usr/bin/runstage2.pl
-/usr/bin/setleds
-/usr/bin/sperl5.8.3
-/usr/bin/sudo
-/usr/bin/test-windows-key
-/usr/bin/tr
-/usr/bin/tty
-/usr/bin/wait4x
-/usr/bin/which
-/usr/bin/whoami
-/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.3.2/cc1
-/usr/lib/gconv/gconv-modules
-/usr/lib/gtk-2.0/2.2.0/engines/libgalaxy.so
-/usr/lib/gtk-2.0/2.2.0/loaders/libpixbufloader-png.so
-/usr/lib/kbd/consolefonts/lat0-16.psf.gz
-/usr/lib/kbd/consoletrans/iso15.acm.gz
-/usr/lib/kbd/consoletrans/iso15.sfm.gz
-/usr/lib/kde3/clock_panelapplet.la
-/usr/lib/kde3/dcopserver.la
-/usr/lib/kde3/kabc_file.la
-/usr/lib/kde3/kabc_file.so
-/usr/lib/kde3/kbuildsycoca.la
-/usr/lib/kde3/kbuildsycoca.so
-/usr/lib/kde3/kcm_access.la
-/usr/lib/kde3/kcm_access.so
-/usr/lib/kde3/kcm_arts.la
-/usr/lib/kde3/kcm_arts.so
-/usr/lib/kde3/kcm_bell.la
-/usr/lib/kde3/kcm_bell.so
-/usr/lib/kde3/kcm_energy.la
-/usr/lib/kde3/kcm_energy.so
-/usr/lib/kde3/kcm_input.la
-/usr/lib/kde3/kcm_input.so
-/usr/lib/kde3/kcm_keyboard.la
-/usr/lib/kde3/kcm_keyboard.so
-/usr/lib/kde3/kcm_keys.la
-/usr/lib/kde3/kcm_keys.so
-/usr/lib/kde3/kcm_kgamma.la
-/usr/lib/kde3/kcm_kgamma.so
-/usr/lib/kde3/kcm_kmix.la
-/usr/lib/kde3/kcm_kmix.so
-/usr/lib/kde3/kcm_nsplugins.la
-/usr/lib/kde3/kcm_nsplugins.so
-/usr/lib/kde3/kcm_randr.la
-/usr/lib/kde3/kcm_randr.so
-/usr/lib/kde3/kcm_style.la
-/usr/lib/kde3/kcm_style.so
-/usr/lib/kde3/kcminit.la
-/usr/lib/kde3/kcminit.so
-/usr/lib/kde3/kconf_update.la
-/usr/lib/kde3/kconf_update.so
-/usr/lib/kde3/kded.la
-/usr/lib/kde3/kded_mountwatcher.la
-/usr/lib/kde3/kdesktop.la
-/usr/lib/kde3/kgreet_classic.la
-/usr/lib/kde3/kgreet_classic.so
-/usr/lib/kde3/kicker.la
-/usr/lib/kde3/kio_devices.la
-/usr/lib/kde3/kio_file.la
-/usr/lib/kde3/klauncher.la
-/usr/lib/kde3/knotify.la
-/usr/lib/kde3/konq_sound.la
-/usr/lib/kde3/ksmserver.la
-/usr/lib/kde3/ksplashmdk.la
-/usr/lib/kde3/ksplashmdk.so
-/usr/lib/kde3/kwin.la
-/usr/lib/kde3/kwin3_mandrake2.la
-/usr/lib/kde3/minipager_panelapplet.la
-/usr/lib/kde3/systemtray_panelapplet.la
-/usr/lib/kde3/taskbar_panelapplet.la
-/usr/lib/krandrinithack.la
-/usr/lib/krandrinithack.so
-/usr/lib/libDrakX/Xconfig
-/usr/lib/libDrakX/any.pm
-/usr/lib/libDrakX/auto/c
-/usr/lib/libDrakX/auto/xf86misc
-/usr/lib/libDrakX/c
-/usr/lib/libDrakX/c.pm
-/usr/lib/libDrakX/class_discard.pm
-/usr/lib/libDrakX/commands.pm
-/usr/lib/libDrakX/common.pm
-/usr/lib/libDrakX/detect_devices.pm
-/usr/lib/libDrakX/devices.pm
-/usr/lib/libDrakX/do_pkgs.pm
-/usr/lib/libDrakX/fs.pm
-/usr/lib/libDrakX/fsedit.pm
-/usr/lib/libDrakX/handle_configs.pm
-/usr/lib/libDrakX/harddrake/sound.pm
-/usr/lib/libDrakX/interactive.pm
-/usr/lib/libDrakX/interactive/gtk.pm
-/usr/lib/libDrakX/keyboard.pm
-/usr/lib/libDrakX/lang.pm
-/usr/lib/libDrakX/list_modules.pm
-/usr/lib/libDrakX/log.pm
-/usr/lib/libDrakX/loopback.pm
-/usr/lib/libDrakX/modules.pm
-/usr/lib/libDrakX/modules/interactive.pm
-/usr/lib/libDrakX/mouse.pm
-/usr/lib/libDrakX/network/network.pm
-/usr/lib/libDrakX/network/tools.pm
-/usr/lib/libDrakX/partition_table.pm
-/usr/lib/libDrakX/partition_table/dos.pm
-/usr/lib/libDrakX/partition_table/empty.pm
-/usr/lib/libDrakX/partition_table/raw.pm
-/usr/lib/libDrakX/printer
-/usr/lib/libDrakX/run_program.pm
-/usr/lib/libDrakX/sbus_probing
-/usr/lib/libDrakX/services.pm
-/usr/lib/libDrakX/steps.pm
-/usr/lib/libDrakX/swap.pm
-/usr/lib/libDrakX/timezone.pm
-/usr/lib/libDrakX/ugtk2.pm
-/usr/lib/libDrakX/xf86misc
-/usr/lib/libatk-1.0.so.0.400.1
-/usr/lib/libbeecrypt.so.6.2.0
-/usr/lib/libbz2.so.1.0.0
-/usr/lib/libconsole.so.0.0.0
-/usr/lib/libcrack.so.2.7
-/usr/lib/libctutils.so.0.0.0
-/usr/lib/libelf-0.89.so
-/usr/lib/libgdk-1.2.so.0.9.1
-/usr/lib/libgdk-x11-2.0.so.0.200.4
-/usr/lib/libgdk_imlib.so.1.9.14
-/usr/lib/libgdk_pixbuf-2.0.so.0.200.4
-/usr/lib/libglib-1.2.so.0.0.10
-/usr/lib/libgmodule-1.2.so.0.0.10
-/usr/lib/libgobject-2.0.so.0.200.3
-/usr/lib/libgtk-1.2.so.0.9.1
-/usr/lib/libgtk-x11-2.0.so.0.200.4
-/usr/lib/libimlib-jpeg.so
-/usr/lib/libkabc.so.1.2.0
-/usr/lib/libkabc_file.so.1.0.0
-/usr/lib/libkdeinit_kbuildsycoca.so
-/usr/lib/libkdeinit_kcminit.so
-/usr/lib/libkdeinit_kconf_update.so
-/usr/lib/libkdeprint.so.4.2.0
-/usr/lib/libkhtml.so.4.2.0
-/usr/lib/libkjs.so.1.2.0
-/usr/lib/libkmid.so.0.0.95
-/usr/lib/libkonq.la
-/usr/lib/libkresources.so.1.2.0
-/usr/lib/libksplashthemes.so.0.0.0
-/usr/lib/libkwalletclient.so.1.0.0
-/usr/lib/libpango-1.0.so.0.200.5
-/usr/lib/libpangox-1.0.so.0.200.5
-/usr/lib/libpangoxft-1.0.so.0.200.5
-/usr/lib/libpcreposix.so.0.0.0
-/usr/lib/libpng12.so.0.1.2.5
-/usr/lib/librpm-4.2.so
-/usr/lib/librpmdb-4.2.so
-/usr/lib/librpmio-4.2.so
-/usr/lib/libvcard.so.0.0.0
-/usr/lib/libxine.so.1.8.1
-/usr/lib/pango/1.2.0/modules/pango-basic-xft.so
-/usr/lib/perl5/5.8.3/AutoLoader.pm
-/usr/lib/perl5/5.8.3/Carp.pm
-/usr/lib/perl5/5.8.3/Digest/base.pm
-/usr/lib/perl5/5.8.3/Exporter
-/usr/lib/perl5/5.8.3/Exporter.pm
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/CORE
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/Config.pm
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/Digest/MD5.pm
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/DynaLoader.pm
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/File
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/Socket.pm
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/XSLoader.pm
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/_h2ph_pre.ph
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/asm/unistd.ph
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/auto/Digest/MD5/MD5.so
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/auto/File
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/auto/Socket
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/bits/syscall.ph
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/lib.pm
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/sys/syscall.ph
-/usr/lib/perl5/5.8.3/i386-linux-thread-multi/syscall.ph
-/usr/lib/perl5/5.8.3/overload.pm
-/usr/lib/perl5/5.8.3/strict.pm
-/usr/lib/perl5/5.8.3/vars.pm
-/usr/lib/perl5/5.8.3/warnings
-/usr/lib/perl5/5.8.3/warnings.pm
-/usr/lib/perl5/vendor_perl/5.8.3/MDK
-/usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi/Glib.pm
-/usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi/Gtk2.pm
-/usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi/Gtk2/Gdk
-/usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi/auto/Glib
-/usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi/auto/Gtk2
-/usr/lib/stage2
-/usr/sbin/chksession
-/usr/sbin/ddcxinfos
-/usr/sbin/fileshareset
-/usr/sbin/update-alternatives
-/usr/share/application-registry/gnome-vfs.applications
-/usr/share/applnk-mdk
-/usr/share/applnk-mdk-simplified/.hidden/.directory
-/usr/share/applnk-mdk-simplified/.hidden/kontact-summary.desktop
-/usr/share/applnk-mdk-simplified/Administer your system/.directory
-/usr/share/applnk-mdk-simplified/Administer your system/Configure your computer.desktop
-/usr/share/applnk-mdk-simplified/Administer your system/KControl.desktop
-/usr/share/applnk-mdk-simplified/Administer your system/KFloppy.desktop
-/usr/share/applnk-mdk-simplified/Administer your system/ark.desktop
-/usr/share/applnk-mdk-simplified/Administer your system/kdepasswd.desktop
-/usr/share/applnk-mdk-simplified/Administer your system/konsole.desktop
-/usr/share/applnk-mdk-simplified/Enjoy music and video/.directory
-/usr/share/applnk-mdk-simplified/Enjoy music and video/Listen to music files.desktop
-/usr/share/applnk-mdk-simplified/Enjoy music and video/Mix music.desktop
-/usr/share/applnk-mdk-simplified/Enjoy music and video/Record sounds.desktop
-/usr/share/applnk-mdk-simplified/Enjoy music and video/Watch television.desktop
-/usr/share/applnk-mdk-simplified/Enjoy music and video/Watch videos.desktop
-/usr/share/applnk-mdk-simplified/Enjoy music and video/kdenlive.desktop
-/usr/share/applnk-mdk-simplified/Enjoy music and video/kmix.desktop
-/usr/share/applnk-mdk-simplified/Organize/.directory
-/usr/share/applnk-mdk-simplified/Organize/Manage projects.desktop
-/usr/share/applnk-mdk-simplified/Organize/Manage your finances.desktop
-/usr/share/applnk-mdk-simplified/Organize/karm.desktop
-/usr/share/applnk-mdk-simplified/Organize/kontact-knotes.desktop
-/usr/share/applnk-mdk-simplified/Organize/kontact-korganizer-time.desktop
-/usr/share/applnk-mdk-simplified/Organize/kontact-korganizer.desktop
-/usr/share/applnk-mdk-simplified/Play games/.directory
-/usr/share/applnk-mdk-simplified/Play games/ArmageTron.desktop
-/usr/share/applnk-mdk-simplified/Play games/Cannon Smash.desktop
-/usr/share/applnk-mdk-simplified/Play games/Chromium.desktop
-/usr/share/applnk-mdk-simplified/Play games/Crack Attack! - Solo.desktop
-/usr/share/applnk-mdk-simplified/Play games/Frozen-Bubble.desktop
-/usr/share/applnk-mdk-simplified/Play games/LBreakout 2.desktop
-/usr/share/applnk-mdk-simplified/Play games/Tuxracer.desktop
-/usr/share/applnk-mdk-simplified/Surf the Internet/.directory
-/usr/share/applnk-mdk-simplified/Surf the Internet/Kppp.desktop
-/usr/share/applnk-mdk-simplified/Surf the Internet/Organize a video conference.desktop
-/usr/share/applnk-mdk-simplified/Surf the Internet/kbear.desktop
-/usr/share/applnk-mdk-simplified/Surf the Internet/konqueror.desktop
-/usr/share/applnk-mdk-simplified/Surf the Internet/kontact-KMail.desktop
-/usr/share/applnk-mdk-simplified/Surf the Internet/kontact-KNode.desktop
-/usr/share/applnk-mdk-simplified/Surf the Internet/kopete.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/.directory
-/usr/share/applnk-mdk-simplified/Use office tools/Create a drawing.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/Create a presentation.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/Create a spreadsheet.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/Create a text document.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/Create flowcharts and diagrams.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/kcalc.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/kdeprintfax.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/kdict.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/kfax.desktop
-/usr/share/applnk-mdk-simplified/Use office tools/kontact-kaddressbook.desktop
-/usr/share/applnk-mdk-simplified/View, modify and create graphics/.directory
-/usr/share/applnk-mdk-simplified/View, modify and create graphics/Edit images and photos.desktop
-/usr/share/applnk-mdk-simplified/View, modify and create graphics/View images and photos.desktop
-/usr/share/applnk-mdk-simplified/View, modify and create graphics/kimdaba.desktop
-/usr/share/applnk-mdk-simplified/View, modify and create graphics/kooka.desktop
-/usr/share/applnk-mdk-simplified/View, modify and create graphics/ksnapshot.desktop
-/usr/share/apps/kabc/formats/binary.desktop
-/usr/share/apps/kconf_update
-/usr/share/apps/kdesktop/directory.autostart
-/usr/share/apps/kdesktop/directory.desktop
-/usr/share/apps/kdesktop/directory.trash
-/usr/share/apps/kdisplay/app-defaults
-/usr/share/apps/khtml/css
-/usr/share/apps/khtml/khtml.rc
-/usr/share/apps/khtml/khtml_popupmenu.rc
-/usr/share/apps/kicker/applets/clockapplet.desktop
-/usr/share/apps/kicker/applets/minipagerapplet.desktop
-/usr/share/apps/kicker/applets/systemtrayapplet.desktop
-/usr/share/apps/kicker/applets/taskbarapplet.desktop
-/usr/share/apps/kicker/default-download-apps-simplified
-/usr/share/apps/kicker/pics/disk1.png
-/usr/share/apps/kicker/pics/disk10.png
-/usr/share/apps/kicker/pics/disk2.png
-/usr/share/apps/kicker/pics/disk3.png
-/usr/share/apps/kicker/pics/disk4.png
-/usr/share/apps/kicker/pics/disk5.png
-/usr/share/apps/kicker/pics/disk6.png
-/usr/share/apps/kicker/pics/disk7.png
-/usr/share/apps/kicker/pics/disk8.png
-/usr/share/apps/kicker/pics/disk9.png
-/usr/share/apps/knotify
-/usr/share/apps/kwin/eventsrc
-/usr/share/autostart
-/usr/share/config/kcmdisplayrc
-/usr/share/config/kcookiejarrc
-/usr/share/config/kdebug.areas
-/usr/share/config/kdebugrc
-/usr/share/config/kdedrc
-/usr/share/config/kdeglobals
-/usr/share/config/kdeprintrc
-/usr/share/config/kdesktoprc
-/usr/share/config/kdm/kdmrc
-/usr/share/config/khotkeysrc
-/usr/share/config/kickerrc
-/usr/share/config/klipperrc
-/usr/share/config/konquerorrc
-/usr/share/config/konsolerc
-/usr/share/config/krootwarningrc
-/usr/share/config/kwritedrc
-/usr/share/config/mountwatcher.desktop
-/usr/share/icons/crystalsvg/16x16/apps/desktop-mdk.png
-/usr/share/icons/crystalsvg/16x16/apps/kicker.png
-/usr/share/icons/crystalsvg/16x16/apps/konqueror.png
-/usr/share/icons/crystalsvg/16x16/apps/kontact-mdk.png
-/usr/share/icons/crystalsvg/16x16/apps/ksplash.png
-/usr/share/icons/crystalsvg/16x16/apps/mandrakegalaxy.png
-/usr/share/icons/crystalsvg/16x16/apps/menuk-mdk.png
-/usr/share/icons/crystalsvg/16x16/mimetypes/unknown.png
-/usr/share/icons/crystalsvg/32x32/apps/desktop-mdk.png
-/usr/share/icons/crystalsvg/32x32/apps/konqueror.png
-/usr/share/icons/crystalsvg/32x32/apps/kontact-mdk.png
-/usr/share/icons/crystalsvg/32x32/apps/ksplash.png
-/usr/share/icons/crystalsvg/32x32/apps/mandrakegalaxy.png
-/usr/share/icons/crystalsvg/32x32/apps/menuk-mdk.png
-/usr/share/icons/crystalsvg/32x32/apps/xapp.png
-/usr/share/icons/crystalsvg/32x32/devices/3floppy_mount.png
-/usr/share/icons/crystalsvg/32x32/devices/cdrom_mount.png
-/usr/share/icons/crystalsvg/32x32/filesystems/trashcan_empty.png
-/usr/share/icons/crystalsvg/index.theme
-/usr/share/icons/default
-/usr/share/icons/hicolor/32x32/apps/ooo_writer.xpm
-/usr/share/icons/hicolor/index.theme
-/usr/share/icons/totem.png
-/usr/share/icons/wilbur.png
-/usr/share/langs
-/usr/share/ldetect-lst/Cards+
-/usr/share/ldetect-lst/MonitorsDB
-/usr/share/ldetect-lst/pcitable
-/usr/share/ldetect-lst/usbtable
-/usr/share/mdk/backgrounds/Mandrake.png
-/usr/share/mdk/faces/ic-tux1.png
-/usr/share/mdk/kde/bookmarks/bookmarks-download.xml
-/usr/share/mdk/mandrakegalaxy/doc.png
-/usr/share/mdk/mandrakegalaxy/mcc.png
-/usr/share/mdk/mandrakegalaxy/mdkclub.png
-/usr/share/mdk/mandrakegalaxy/mdkexpert.png
-/usr/share/mdk/mandrakegalaxy/mdkgalaxy-en.html
-/usr/share/mdk/mandrakegalaxy/mdksoft.png
-/usr/share/mdk/mandrakegalaxy/mdkstore.png
-/usr/share/mimelnk
-/usr/share/services/about.protocol
-/usr/share/services/ar.protocol
-/usr/share/services/ark_part.desktop
-/usr/share/services/audiocd.protocol
-/usr/share/services/bmp.kimgio
-/usr/share/services/bzip.protocol
-/usr/share/services/bzip2.protocol
-/usr/share/services/cgi.protocol
-/usr/share/services/chatwindow.desktop
-/usr/share/services/configcolors.desktop
-/usr/share/services/configfonts.desktop
-/usr/share/services/configfreebusy.desktop
-/usr/share/services/configgroupautomation.desktop
-/usr/share/services/configgroupscheduling.desktop
-/usr/share/services/configmain.desktop
-/usr/share/services/configtime.desktop
-/usr/share/services/configviews.desktop
-/usr/share/services/cursorthumbnail.desktop
-/usr/share/services/data.protocol
-/usr/share/services/devices.protocol
-/usr/share/services/djvuthumbnail.desktop
-/usr/share/services/eps.kimgio
-/usr/share/services/file.protocol
-/usr/share/services/finger.protocol
-/usr/share/services/fish.protocol
-/usr/share/services/floppy.protocol
-/usr/share/services/fonts.protocol
-/usr/share/services/fontthumbnail.desktop
-/usr/share/services/ftp.protocol
-/usr/share/services/ghelp.protocol
-/usr/share/services/gif.kimgio
-/usr/share/services/gsthumbnail.desktop
-/usr/share/services/gzip.protocol
-/usr/share/services/help.protocol
-/usr/share/services/htmlthumbnail.desktop
-/usr/share/services/http.protocol
-/usr/share/services/http_cache_cleaner.desktop
-/usr/share/services/https.protocol
-/usr/share/services/ico.kimgio
-/usr/share/services/imagethumbnail.desktop
-/usr/share/services/imap4.protocol
-/usr/share/services/imaps.protocol
-/usr/share/services/info.protocol
-/usr/share/services/jpeg.kimgio
-/usr/share/services/kabconfig.desktop
-/usr/share/services/kabldapconfig.desktop
-/usr/share/services/kaccess.desktop
-/usr/share/services/kaddressbook
-/usr/share/services/kamera.protocol
-/usr/share/services/katedefaultproject.desktop
-/usr/share/services/katepart.desktop
-/usr/share/services/kbearftp.protocol
-/usr/share/services/kbeargftimportfilter.desktop
-/usr/share/services/kbearkrusaderimportfilter.desktop
-/usr/share/services/kbearncftpimportfilter.desktop
-/usr/share/services/kbearoldimportfilter.desktop
-/usr/share/services/kbearwincommanderimportfilter.desktop
-/usr/share/services/kbearws_ftpimportfilter.desktop
-/usr/share/services/kbzip2filter.desktop
-/usr/share/services/kcertpart.desktop
-/usr/share/services/kcmweather.desktop
-/usr/share/services/kcmweatherservice.desktop
-/usr/share/services/kconfiguredialog/kopete_autoreplace_config.desktop
-/usr/share/services/kconfiguredialog/kopete_cryptography_config.desktop
-/usr/share/services/kconfiguredialog/kopete_highlight_config.desktop
-/usr/share/services/kconfiguredialog/kopete_history_config.desktop
-/usr/share/services/kconfiguredialog/kopete_msn_config.desktop
-/usr/share/services/kconfiguredialog/kopete_nowlistening_config.desktop
-/usr/share/services/kconfiguredialog/kopete_texteffect_config.desktop
-/usr/share/services/kconfiguredialog/kopete_translator_config.desktop
-/usr/share/services/kconfiguredialog/kopete_webpresence_config.desktop
-/usr/share/services/kded/favicons.desktop
-/usr/share/services/kded/kcookiejar.desktop
-/usr/share/services/kded/kdeprintd.desktop
-/usr/share/services/kded/konqy_preloader.desktop
-/usr/share/services/kded/kpasswdserver.desktop
-/usr/share/services/kded/kssld.desktop
-/usr/share/services/kded/kwalletd.desktop
-/usr/share/services/kded/mountwatcher.desktop
-/usr/share/services/kded/proxyscout.desktop
-/usr/share/services/kdeprint_part.desktop
-/usr/share/services/kfile_au.desktop
-/usr/share/services/kfile_avi.desktop
-/usr/share/services/kfile_bmp.desktop
-/usr/share/services/kfile_dvi.desktop
-/usr/share/services/kfile_font.desktop
-/usr/share/services/kfile_ico.desktop
-/usr/share/services/kfile_jpeg.desktop
-/usr/share/services/kfile_m3u.desktop
-/usr/share/services/kfile_mp3.desktop
-/usr/share/services/kfile_ogg.desktop
-/usr/share/services/kfile_pcx.desktop
-/usr/share/services/kfile_pdf.desktop
-/usr/share/services/kfile_png.desktop
-/usr/share/services/kfile_pnm.desktop
-/usr/share/services/kfile_ps.desktop
-/usr/share/services/kfile_tga.desktop
-/usr/share/services/kfile_tiff.desktop
-/usr/share/services/kfile_vcf.desktop
-/usr/share/services/kfile_wav.desktop
-/usr/share/services/kfile_xbm.desktop
-/usr/share/services/kfindpart.desktop
-/usr/share/services/kfontviewpart.desktop
-/usr/share/services/kgzipfilter.desktop
-/usr/share/services/khelpcenter.desktop
-/usr/share/services/khtml.desktop
-/usr/share/services/khtmlimage.desktop
-/usr/share/services/kio_uiserver.desktop
-/usr/share/services/kjavaappletviewer.desktop
-/usr/share/services/kmailservice.protocol
-/usr/share/services/kmanpart.desktop
-/usr/share/services/kmixctrl_restore.desktop
-/usr/share/services/kmultipart.desktop
-/usr/share/services/knewsservice.protocol
-/usr/share/services/knotify.desktop
-/usr/share/services/kntsrcfilepropsdlg.desktop
-/usr/share/services/konq_aboutpage.desktop
-/usr/share/services/konq_detailedlistview.desktop
-/usr/share/services/konq_iconview.desktop
-/usr/share/services/konq_infolistview.desktop
-/usr/share/services/konq_multicolumnview.desktop
-/usr/share/services/konq_sidebartng.desktop
-/usr/share/services/konq_textview.desktop
-/usr/share/services/konq_treeview.desktop
-/usr/share/services/konqueror_config.desktop
-/usr/share/services/konsole-script.desktop
-/usr/share/services/konsolepart.desktop
-/usr/share/services/kontact/kaddressbookplugin.desktop
-/usr/share/services/kontact/kmailplugin.desktop
-/usr/share/services/kontact/knodeplugin.desktop
-/usr/share/services/kontact/knotesplugin.desktop
-/usr/share/services/kontact/korganizerplugin.desktop
-/usr/share/services/kontact/summaryplugin.desktop
-/usr/share/services/kontact/todoplugin.desktop
-/usr/share/services/kontact/weatherplugin.desktop
-/usr/share/services/kontactconfig.desktop
-/usr/share/services/kopete_accountconfig.desktop
-/usr/share/services/kopete_aim.desktop
-/usr/share/services/kopete_appearanceconfig.desktop
-/usr/share/services/kopete_autoreplace.desktop
-/usr/share/services/kopete_behaviorconfig.desktop
-/usr/share/services/kopete_connectionstatus.desktop
-/usr/share/services/kopete_contactnotes.desktop
-/usr/share/services/kopete_cryptography.desktop
-/usr/share/services/kopete_highlight.desktop
-/usr/share/services/kopete_history.desktop
-/usr/share/services/kopete_icq.desktop
-/usr/share/services/kopete_irc.desktop
-/usr/share/services/kopete_jabber.desktop
-/usr/share/services/kopete_msn.desktop
-/usr/share/services/kopete_nowlistening.desktop
-/usr/share/services/kopete_sms.desktop
-/usr/share/services/kopete_texteffect.desktop
-/usr/share/services/kopete_translator.desktop
-/usr/share/services/kopete_webpresence.desktop
-/usr/share/services/kopete_yahoo.desktop
-/usr/share/services/korganizer/birthdays.desktop
-/usr/share/services/korganizer/datenums.desktop
-/usr/share/services/korganizer/exchange.desktop
-/usr/share/services/korganizer/hebrew.desktop
-/usr/share/services/korganizer/holidays.desktop
-/usr/share/services/korganizer/projectview.desktop
-/usr/share/services/korganizer/webexport.desktop
-/usr/share/services/kpfpropertiesdialogplugin.desktop
-/usr/share/services/kresources/kabc/dir.desktop
-/usr/share/services/kresources/kabc/file.desktop
-/usr/share/services/kresources/kabc/imap.desktop
-/usr/share/services/kresources/kabc/ldapkio.desktop
-/usr/share/services/kresources/kabc/net.desktop
-/usr/share/services/kresources/kcal/imap.desktop
-/usr/share/services/kresources/kcal/kabc.desktop
-/usr/share/services/kresources/kcal/local.desktop
-/usr/share/services/kresources/kcal/localdir.desktop
-/usr/share/services/kresources/kcal/remote.desktop
-/usr/share/services/kshorturifilter.desktop
-/usr/share/services/ksplash.desktop
-/usr/share/services/ksplashdefault.desktop
-/usr/share/services/ksplashmdk.desktop
-/usr/share/services/ksplashredmond.desktop
-/usr/share/services/ksplashstandard.desktop
-/usr/share/services/ksycoca-en_US
-/usr/share/services/ktexteditor_insertfile.desktop
-/usr/share/services/ktexteditor_isearch.desktop
-/usr/share/services/ktexteditor_kdatatool.desktop
-/usr/share/services/kuriikwsfilter.desktop
-/usr/share/services/kurisearchfilter.desktop
-/usr/share/services/kwallet_config.desktop
-/usr/share/services/kwalletmanager_show.desktop
-/usr/share/services/kweatherservice.desktop
-/usr/share/services/kwrited.desktop
-/usr/share/services/kxkb.desktop
-/usr/share/services/ldap.protocol
-/usr/share/services/ldifvcardthumbnail.desktop
-/usr/share/services/localdomainurifilter.desktop
-/usr/share/services/mac.protocol
-/usr/share/services/man.protocol
-/usr/share/services/metainfo.protocol
-/usr/share/services/mms.protocol
-/usr/share/services/nfs.protocol
-/usr/share/services/nntp.protocol
-/usr/share/services/pbm.kimgio
-/usr/share/services/pcx.kimgio
-/usr/share/services/pgm.kimgio
-/usr/share/services/picturethumbnail.desktop
-/usr/share/services/png.kimgio
-/usr/share/services/pop3.protocol
-/usr/share/services/pop3s.protocol
-/usr/share/services/popmail-conduit.desktop
-/usr/share/services/ppm.kimgio
-/usr/share/services/print.protocol
-/usr/share/services/printdb.protocol
-/usr/share/services/programs.protocol
-/usr/share/services/rdp.protocol
-/usr/share/services/rlogin.protocol
-/usr/share/services/rssservice.desktop
-/usr/share/services/rtsp.protocol
-/usr/share/services/scanservice.desktop
-/usr/share/services/searchproviders/acronym.desktop
-/usr/share/services/searchproviders/alexa.desktop
-/usr/share/services/searchproviders/alexa_url.desktop
-/usr/share/services/searchproviders/alltheweb.desktop
-/usr/share/services/searchproviders/altavista.desktop
-/usr/share/services/searchproviders/appsy.desktop
-/usr/share/services/searchproviders/austronaut.desktop
-/usr/share/services/searchproviders/bugft.desktop
-/usr/share/services/searchproviders/bugno.desktop
-/usr/share/services/searchproviders/call.desktop
-/usr/share/services/searchproviders/citeseer.desktop
-/usr/share/services/searchproviders/cpan.desktop
-/usr/share/services/searchproviders/ctan.desktop
-/usr/share/services/searchproviders/ctan_cat.desktop
-/usr/share/services/searchproviders/de2en.desktop
-/usr/share/services/searchproviders/dmoz.desktop
-/usr/share/services/searchproviders/docbook.desktop
-/usr/share/services/searchproviders/doi.desktop
-/usr/share/services/searchproviders/en2de.desktop
-/usr/share/services/searchproviders/en2es.desktop
-/usr/share/services/searchproviders/en2fr.desktop
-/usr/share/services/searchproviders/en2it.desktop
-/usr/share/services/searchproviders/es2en.desktop
-/usr/share/services/searchproviders/excite.desktop
-/usr/share/services/searchproviders/feedster.desktop
-/usr/share/services/searchproviders/foldoc.desktop
-/usr/share/services/searchproviders/fr2en.desktop
-/usr/share/services/searchproviders/freshmeat.desktop
-/usr/share/services/searchproviders/froogle.desktop
-/usr/share/services/searchproviders/google.desktop
-/usr/share/services/searchproviders/google_advanced.desktop
-/usr/share/services/searchproviders/google_groups.desktop
-/usr/share/services/searchproviders/google_images.desktop
-/usr/share/services/searchproviders/google_lucky.desktop
-/usr/share/services/searchproviders/google_news.desktop
-/usr/share/services/searchproviders/hotbot.desktop
-/usr/share/services/searchproviders/hyperdictionary.desktop
-/usr/share/services/searchproviders/hyperdictionary_thesaurus.desktop
-/usr/share/services/searchproviders/imdb.desktop
-/usr/share/services/searchproviders/it2en.desktop
-/usr/share/services/searchproviders/jeeves.desktop
-/usr/share/services/searchproviders/kde.desktop
-/usr/share/services/searchproviders/kde_webcvs.desktop
-/usr/share/services/searchproviders/leo.desktop
-/usr/share/services/searchproviders/lycos.desktop
-/usr/share/services/searchproviders/mamma.desktop
-/usr/share/services/searchproviders/metacrawler.desktop
-/usr/share/services/searchproviders/msdn.desktop
-/usr/share/services/searchproviders/netcraft.desktop
-/usr/share/services/searchproviders/nl-telephone.desktop
-/usr/share/services/searchproviders/nl-teletekst.desktop
-/usr/share/services/searchproviders/pgpkeys.desktop
-/usr/share/services/searchproviders/php.desktop
-/usr/share/services/searchproviders/python.desktop
-/usr/share/services/searchproviders/qt.desktop
-/usr/share/services/searchproviders/rae.desktop
-/usr/share/services/searchproviders/rfc.desktop
-/usr/share/services/searchproviders/rpmfind.desktop
-/usr/share/services/searchproviders/ruby_application_archive.desktop
-/usr/share/services/searchproviders/seek.desktop
-/usr/share/services/searchproviders/sourceforge.desktop
-/usr/share/services/searchproviders/thesaurus.desktop
-/usr/share/services/searchproviders/vivisimo.desktop
-/usr/share/services/searchproviders/voila.desktop
-/usr/share/services/searchproviders/webster.desktop
-/usr/share/services/searchproviders/whatis.desktop
-/usr/share/services/searchproviders/wikipedia.desktop
-/usr/share/services/searchproviders/wordref.desktop
-/usr/share/services/settings.protocol
-/usr/share/services/sftp.protocol
-/usr/share/services/shellscript.desktop
-/usr/share/services/sieve.protocol
-/usr/share/services/smb.protocol
-/usr/share/services/smtp.protocol
-/usr/share/services/smtps.protocol
-/usr/share/services/ssh.protocol
-/usr/share/services/system.protocol
-/usr/share/services/tar.protocol
-/usr/share/services/telnet.protocol
-/usr/share/services/textthumbnail.desktop
-/usr/share/services/tga.kimgio
-/usr/share/services/thumbnail.protocol
-/usr/share/services/tiff.kimgio
-/usr/share/services/useragentstrings/ie401onwinnt4.desktop
-/usr/share/services/useragentstrings/ie45onwinnt5.desktop
-/usr/share/services/useragentstrings/ie501onwinnt5.desktop
-/usr/share/services/useragentstrings/ie50onppc.desktop
-/usr/share/services/useragentstrings/ie50onwin95.desktop
-/usr/share/services/useragentstrings/ie55onwin98.desktop
-/usr/share/services/useragentstrings/ie55onwinnt5.desktop
-/usr/share/services/useragentstrings/ie60onwinnt51.desktop
-/usr/share/services/useragentstrings/lynxoncurrent.desktop
-/usr/share/services/useragentstrings/mozoncurrent.desktop
-/usr/share/services/useragentstrings/mozonwin2000.desktop
-/usr/share/services/useragentstrings/mozonwinnt4.desktop
-/usr/share/services/useragentstrings/nn301oncurrent.desktop
-/usr/share/services/useragentstrings/nn475oncurrent.desktop
-/usr/share/services/useragentstrings/nn475onwin95.desktop
-/usr/share/services/useragentstrings/nn476onppc.desktop
-/usr/share/services/useragentstrings/op403onwinnt4.desktop
-/usr/share/services/useragentstrings/safari.desktop
-/usr/share/services/useragentstrings/w3moncurrent.desktop
-/usr/share/services/useragentstrings/wgetoncurrent.desktop
-/usr/share/services/videothumbnail.desktop
-/usr/share/services/webcal.protocol
-/usr/share/services/webdav.protocol
-/usr/share/services/webdavs.protocol
-/usr/share/services/xbm.kimgio
-/usr/share/services/xpm.kimgio
-/usr/share/services/xv.kimgio
-/usr/share/services/zip.protocol
-/usr/share/servicetypes
-/usr/share/themes/Default/gtk-2.0
-/usr/share/themes/Galaxy/gtk-2.0
diff --git a/move/data/devices b/move/data/devices
deleted file mode 100644
index d409df63b..000000000
--- a/move/data/devices
+++ /dev/null
@@ -1,4 +0,0 @@
-/dev/console c 5 1
-/dev/tty4 c 4 4
-/dev/tty3 c 4 3
-/dev/tty2 c 4 2
diff --git a/move/data/etcfiles b/move/data/etcfiles
deleted file mode 100644
index 721681766..000000000
--- a/move/data/etcfiles
+++ /dev/null
@@ -1,36 +0,0 @@
-# READ  directories/files that will be read (we let only non trivial things here)
-/etc/bonobo-activation
-/etc/esd.conf
-/etc/gimp
-/etc/gnucash
-/etc/host.conf
-/etc/imrc
-/etc/initlog.conf
-/etc/localtime
-/etc/openoffice
-/etc/rpc
-/etc/termcap
-/etc/tmdns.conf
-/var/lib/clamav/daily.cvd
-/var/lib/clamav/main.cvd
-
-# OVERWRITE  files that will be overwritten
-/etc/modules
-/etc/modprobe.preload
-/etc/ntp.conf
-/etc/.pwd.lock
-/etc/inittab
-/etc/ppp/options
-/etc/ppp/chap-secrets
-/etc/ppp/pap-secrets
-/etc/ppp/pppoe.conf
-/var/log/clamav/freshclam.log
-
-# DIR  mandatory directories because files will be written in
-/etc/profile.d
-/etc/rpm
-/etc/sysconfig
-/etc/sysconfig/console/consolefonts
-/etc/sysconfig/console/consoletrans
-/etc/sysconfig/network-scripts
-/etc/X11/xinit.d
diff --git a/move/data/etcfiles-report b/move/data/etcfiles-report
deleted file mode 100644
index 0e8aa0908..000000000
--- a/move/data/etcfiles-report
+++ /dev/null
@@ -1,151 +0,0 @@
-read:
-	/etc/DIR_COLORS
-	/etc/X11/fs/config
-	/etc/X11/xserver/SecurityPolicy
-	/etc/bashrc
-	/etc/bonobo-activation/bonobo-activation-config.xml
-	/etc/cups/client.conf
-	/etc/devfs/conf.d/dynamic.conf
-	/etc/devfsd.conf
-	/etc/dynamic/scripts/functions.script
-	/etc/dynamic/scripts/part.script
-	/etc/esd.conf
-	/etc/fonts/fonts.conf
-	/etc/fonts/local.conf
-	/etc/fstab
-	/etc/gconf/2/path
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/audio_codecs/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/audio_settings/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/call_forwarding/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/contacts/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/devices/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/gatekeeper/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/general/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/history/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/ldap/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/personal_data/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/ports/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/video_display/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/video_settings/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/apps/gnomemeeting/view/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/desktop/gnome/interface/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/desktop/gnome/sound/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/audio_settings/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/call_forwarding/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/contacts/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/devices/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/gatekeeper/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/general/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/history/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/ldap/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/personal_data/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/ports/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/video_display/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/video_settings/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/apps/gnomemeeting/view/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/desktop/gnome/interface/%gconf.xml
-	/etc/gconf/gconf.xml.defaults/schemas/desktop/gnome/sound/%gconf.xml
-	/etc/gimp/1.2/gimprc
-	/etc/gimp/1.2/gimprc_user
-	/etc/gimp/1.2/gtkrc
-	/etc/gimp/1.2/gtkrc_user
-	/etc/gimp/1.2/unitrc
-	/etc/gnome-vfs-2.0/modules/cdda-module.conf
-	/etc/gnome-vfs-2.0/modules/default-modules.conf
-	/etc/gnome-vfs-2.0/modules/ssl-modules.conf
-	/etc/gnucash/config
-	/etc/group
-	/etc/gtk-2.0/gdk-pixbuf.loaders
-	/etc/gtk-2.0/gtk.immodules
-	/etc/host.conf
-	/etc/hotplug/blacklist
-	/etc/hotplug/hotplug.functions
-	/etc/hotplug/scsi.agent
-	/etc/hotplug/usb.agent
-	/etc/hotplug/usb.handmap
-	/etc/hotplug/usb.usermap
-	/etc/hotplug/usb/usb-storage
-	/etc/imrc
-	/etc/initlog.conf
-	/etc/inittab
-	/etc/inputrc
-	/etc/ld.so.cache
-	/etc/localtime
-	/etc/login.defs
-	/etc/modules
-	/etc/modules.conf
-	/etc/modules.devfs
-	/etc/nsswitch.conf
-	/etc/openoffice/autoresponse.conf
-	/etc/openoffice/openoffice.conf
-	/etc/pam.d/other
-	/etc/pam.d/su
-	/etc/pam.d/sudo
-	/etc/pam.d/system-auth
-	/etc/pam.d/xserver
-	/etc/pango/pango.modules
-	/etc/passwd
-	/etc/passwd-
-	/etc/profile.d/10lang.sh
-	/etc/profile.d/alias.sh
-	/etc/profile.d/configure_keyboard.sh
-	/etc/profile.d/glib20.sh
-	/etc/profile.d/inputrc.sh
-	/etc/profile.d/kde3.sh
-	/etc/profile.d/msec.sh
-	/etc/profile.d/qtdir3.sh
-	/etc/profile.d/screen.sh
-	/etc/profile.d/ssh-client.sh
-	/etc/profile.d/tmpdir.sh
-	/etc/profile.d/xhost.sh
-	/etc/rc.d/init.d/functions
-	/etc/rc.d/init.d/mandrake_consmap
-	/etc/rc.d/init.d/syslog
-	/etc/rc.d/init.d/xfs
-	/etc/resolv.conf
-	/etc/rpc
-	/etc/security/console.perms
-	/etc/security/fileshare.conf
-	/etc/security/limits.conf
-	/etc/security/pam_env.conf
-	/etc/services
-	/etc/shells
-	/etc/skel/.bash_logout
-	/etc/skel/.bash_profile
-	/etc/skel/.bashrc
-	/etc/skel/.mailcap
-	/etc/skel/.screenrc
-	/etc/sudoers
-	/etc/sysconfig/i18n
-	/etc/sysconfig/init
-	/etc/sysconfig/msec
-	/etc/sysconfig/syslog
-	/etc/sysconfig/usb
-	/etc/syslog.conf
-	/etc/termcap
-	/etc/tmdns.conf
-wrote:
-	/etc/group
-	/etc/inittab
-	/etc/modules
-	/etc/modules.conf
-	/etc/passwd
-	/etc/passwd-
-	/etc/sysconfig/i18n
-new:
-	/etc/X11/XF86Config
-	/etc/X11/XF86Config-4
-	/etc/X11/XF86Config-4.old
-	/etc/X11/XF86Config.old
-	/etc/hosts
-	/etc/mcc.conf
-	/etc/profile.d/proxy.csh
-	/etc/profile.d/proxy.sh
-	/etc/rpm/macros
-	/etc/shadow
-	/etc/sysconfig/autologin
-	/etc/sysconfig/console/consolefonts/lat0-16.psf.gz
-	/etc/sysconfig/console/consoletrans/iso15.acm.gz
-	/etc/sysconfig/console/consoletrans/iso15.sfm.gz
-	/etc/sysconfig/network
-	/etc/sysconfig/network-scripts/ifcfg-eth0
diff --git a/move/data/isolinux-graphic.bmp b/move/data/isolinux-graphic.bmp
deleted file mode 100644
index 3d004d2d0..000000000
--- a/move/data/isolinux-graphic.bmp
+++ /dev/null
diff --git a/move/data/isolinux-graphic.bmp.parameters b/move/data/isolinux-graphic.bmp.parameters
deleted file mode 100755
index babeff953..000000000
--- a/move/data/isolinux-graphic.bmp.parameters
+++ /dev/null
@@ -1,10 +0,0 @@
-progress_w=6
-progress_real_w=468
-clear_h=800
-progress_c=191
-progress_h=13
-mode=259
-clear_w=600
-isolinux_mode=1
-progress_x=165
-progress_y=403
diff --git a/move/data/keyfiles b/move/data/keyfiles
deleted file mode 100644
index d414c83ba..000000000
--- a/move/data/keyfiles
+++ /dev/null
@@ -1,24 +0,0 @@
-/etc/fstab
-/etc/group
-/etc/modules
-/etc/modules.conf
-/etc/modprobe.preload
-/etc/modprobe.conf
-/etc/passwd
-/etc/resolv.conf
-/etc/sudoers
-/etc/cups/*
-/etc/devfs/conf.d/*
-/etc/profile.d/*
-/etc/sane.d/*
-/etc/security/fileshare.conf
-/etc/shorewall/*
-/etc/sysconfig/*
-/etc/sysconfig/console/consolefonts/*
-/etc/sysconfig/console/consoletrans/*
-/etc/sysconfig/harddrake2/previous_hw
-/etc/sysconfig/network-scripts/*
-/etc/sysconfig/suspend-scripts/suspend.d/*
-/etc/X11/XF86Config-4
-/etc/X11/X
-/etc/rc.d/rc.local
diff --git a/move/data/make_i18n_list b/move/data/make_i18n_list
deleted file mode 100755
index df53d39fb..000000000
--- a/move/data/make_i18n_list
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-my $prefix = $ARGV[0];
-my $rpm = "rpm --root $prefix";
-
-unlink glob("i18n_*.list");
-
-my %have;
-foreach my $list (glob("*.list")) {
-    $have{$_} = $list foreach chomp_(cat_($list));
-}
-
-my @pkg_langs = map { /locales-(.*)/ } `$rpm -qa --qf "%{name}\n" locales-*`;
-
-my %extra_pkgs = (
-    hy => 'fonts-ttf-armenian',
-    ja => 'fonts-ttf-japanese',
-    kn => 'fonts-ttf-kannada',
-    ko => 'fonts-ttf-korean',
-    ta => 'fonts-ttf-tamil fonts-ttf-tscii fonts-bitmap-tscii',
-    th => 'fonts-ttf-thai',
-    zh => 'fonts-ttf-gb2312 taipeifonts fonts-ttf-big5',
-    el => 'fonts-type1-greek',
-);
-
-foreach my $i18n (@pkg_langs) {
-    #- $i18n_re is different from $i18n because of things like locales-no giving nb|nn|no
-    my $i18n_re = join('|', uniq($i18n, map { if_(/locales-(\S+)/, $1) } `$rpm -q --provides locales-$i18n`));
-
-    my @pkgs = uniq("locales-$i18n", chomp_(`$rpm -q --qf "%{name}\n" --whatrequires locales-$i18n`));
-    push @pkgs, split(' ', $extra_pkgs{$i18n} || '');
-    my @l = grep { !m!^/usr/share/locale/en_ZA! } uniq(chomp_(`$rpm -ql @pkgs`));
-    my ($dirs, $files) = partition { -d "$prefix$_" } @l;
-
-    my @i18n_dirs = uniq(grep { m!/($i18n_re) (_[^/]*)? (\.[^/]*)? (\@[^/]*)?$!x } @$dirs);
-    my $i18n_dirs_re = join('|', map { quotemeta $_ } @i18n_dirs);
-    my @files = grep { !m!^($i18n_dirs_re)/! } @$files;
-
-    my $list = "i18n_$i18n.list";
-    foreach (@i18n_dirs, @files) {
-	$have{$_} and die "$_ would be twice: in $have{$_} and $list\n";
-	$have{$_} = $list;
-    }
-    output($list, map { "$_\n" } @i18n_dirs, @files);
-}
diff --git a/move/data/nvidia.list b/move/data/nvidia.list
deleted file mode 100644
index 01fd67a6c..000000000
--- a/move/data/nvidia.list
+++ /dev/null
@@ -1,5 +0,0 @@
-/usr/lib/libGLcore.so.1
-/usr/lib/libGLcore.so.1.0.6106
-/usr/lib/libnvidia-tls.so.1
-/usr/lib/libnvidia-tls.so.1.0.6106
-/usr/X11R6/lib/modules/extensions/libglx.so.1.0.6106
diff --git a/move/data/symlinks b/move/data/symlinks
deleted file mode 100644
index b6601d4e1..000000000
--- a/move/data/symlinks
+++ /dev/null
@@ -1,4 +0,0 @@
-/sbin
-/lib
-/bin
-/opt
diff --git a/move/data/totem.dirs b/move/data/totem.dirs
deleted file mode 100644
index bc73094f8..000000000
--- a/move/data/totem.dirs
+++ /dev/null
@@ -1,2 +0,0 @@
-/usr/share/totem
-/usr/lib/xine
diff --git a/move/data/totem.list b/move/data/totem.list
deleted file mode 100644
index ab0adbbee..000000000
--- a/move/data/totem.list
+++ /dev/null
@@ -1,68 +0,0 @@
-/bin/sleep
-/etc/gnome-vfs-mime-magic
-/usr/X11R6/lib/libXi.so.6.0
-/usr/X11R6/lib/libXrandr.so.2.0
-/usr/X11R6/lib/libXtst.so.6.1
-/usr/bin/mdk_behind_totem
-/usr/bin/totem
-/usr/lib/GConf/2/libgconfbackend-xml.so
-/usr/lib/gconfd-2
-/usr/lib/gnome-vfs-2.0/modules/libfile.so
-/usr/lib/gtk-2.0/2.2.0/engines/libgalaxy.so
-/usr/lib/gtk-2.0/2.2.0/loaders/libpixbufloader-png.so
-/usr/lib/kde3/libkshorturifilter.so
-/usr/lib/kde3/libkuriikwsfilter.so
-/usr/lib/kde3/libkurisearchfilter.so
-/usr/lib/kde3/liblocaldomainurifilter.so
-/usr/lib/libSDL-1.2.so.0.7.0
-/usr/lib/libORBit-2.so.0.0.0
-/usr/lib/libORBitCosNaming-2.so.0.0.0
-/usr/lib/libartsc.so.0.0.0
-/usr/lib/libartscbackend.so.0.0.0
-/usr/lib/libatk-1.0.so.0.400.1
-/usr/lib/libbonobo-2.so.0.0.0
-/usr/lib/libbonobo-activation.so.4.0.0
-/usr/lib/libbonoboui-2.so.0.0.0
-/usr/lib/libcdio.so.0.0.0
-/usr/lib/libcrypto.so.0.9.7
-/usr/lib/libcurl.so.2.0.2
-/usr/lib/libgconf-2.so.4.1.0
-/usr/lib/libgdk-x11-2.0.so.0.200.4
-/usr/lib/libgdk_pixbuf-2.0.so.0.200.4
-/usr/lib/libglade-2.0.so.0.0.1
-/usr/lib/libglade/2.0/libbonobo.so
-/usr/lib/libglade/2.0/libgnome.so
-/usr/lib/libgnome-2.so.0.400.0
-/usr/lib/libgnome-desktop-2.so.2.1.9
-/usr/lib/libgnomecanvas-2.so.0.400.0
-/usr/lib/libgnomeui-2.so.0.400.0
-/usr/lib/libgnomevfs-2.so.0.400.2
-/usr/lib/libgobject-2.0.so.0.200.3
-/usr/lib/libgtk-x11-2.0.so.0.200.4
-/usr/lib/libiso9660.so.0.0.0
-/usr/lib/liblirc_client.so.0.0.0
-/usr/lib/libpango-1.0.so.0.200.5
-/usr/lib/libpangoft2-1.0.so.0.200.5
-/usr/lib/libpangox-1.0.so.0.200.5
-/usr/lib/libpangoxft-1.0.so.0.200.5
-/usr/lib/libpng12.so.0.1.2.5
-/usr/lib/libspeex.so.1.1.0
-/usr/lib/libssl.so.0.9.7
-/usr/lib/libstartup-notification-1.so.0.0.0
-/usr/lib/libvcd.so.0.0.0
-/usr/lib/libvcdinfo.so.0.0.0
-/usr/lib/libxine.so.1.8.1
-/usr/lib/libxml2.so.2.6.6
-/usr/lib/pango/1.2.0/modules/pango-basic-xft.so
-/usr/lib/xine
-/usr/share/alsa
-/usr/share/totem
-/usr/lib/gnome-vfs-2.0/modules/libcdda.so
-/usr/lib/libcdda_interface.so.0
-/usr/lib/libcdda_interface.so.0.9.8
-/usr/lib/libcdda_paranoia.so.0
-/usr/lib/libcdda_paranoia.so.0.9.8
-/sbin/ifplugd
-/sbin/dhcpcd
-/sbin/dhclient
-/sbin/zcip
diff --git a/move/doc/README b/move/doc/README
deleted file mode 100644
index 28865cdba..000000000
--- a/move/doc/README
+++ /dev/null
@@ -1,95 +0,0 @@
-MandrakeMove is Copyright (c) 2003 Mandrakesoft
-
-MandrakeMove is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-
-                     MandrakeMove README
-
-
-      General overview.
-
-Mandrake Move is a "live" Mandrake Linux Discovery based system,
-an OS which boots off a removable device (a CDROM in our case)
-without needing any installation on hard drive (it doesn't need
-any harddrive in computer actually).
-
-Mandrake Move brings two main innovations:
-
-- ability to eject the CDROM which Move was booted from, still
-  running a multimedia player, so that user can play
-  ogg/mp3/vcd/avi/dvd discs without needing a second CDROM drive
-
-- transparently saving user and system data to a USB key
-
-
-      Technical aspects.
-
-  CDROM ejecting.
-
-Works by killing most unneeded running application (open-office,
-frozen-bubble, gimp, etc), then transfering X/kde/totem files
-(already pertaining to a loopback) into memory, then CDROM drive
-is not busy anymore.
-
-  Paths of boot.
-
-MandrakeMove should work in three different paths of boot:
-
-- mode 1: no USB key
-
-  automatic X configuration, DrakX starts up, asks for language,
-  license, asks for a key (we answer we have no key), possibly
-  for mouse and keyboard, username/password, auto-detects sound,
-  printer and network devices, starts up KDE
-
-  this is a normal live mode, nothing particular
-
-- mode 2: USB key but doesn't yet contain MandrakeMove files
-
-  automatic X configuration, DrakX starts up, asks for language,
-  license, set up configuration files on the key, possibly asks
-  for mouse and keyboard, username/password, starts up KDE
-
-  once KDE is booted, we are in full Move move, in which user
-  data and system configuration data are saved on the usb key
-
-  the USB key is mounted on /home, and some symlinks are created
-  from a selection of /etc system files to a per-host directory
-  on the USB key (based in /home/.sysconf)
-
-  a daemon is monitoring modifications made to /etc, and
-  transparently copy modified/new files to the USB key; hence
-  Mandrake Move is much extensible, any modification on /etc will
-  be saved
-
-- mode 3: USB key, contains MandrakeMove files
-
-  - 3.1: we are running on the same machine
-
-  DrakX GUI not even shows up as we use existing configuration
-  files, we set up stuff of the usb key (/home etc) and we start
-  up KDE
-
-  - 3.2: we are running on another machine
-
-  We use language, username/password, and homedir from USB key,
-  but other system configuration need to be re-asked:
-
-  automatic X configuration, DrakX starts up, possibly asks for
-  mouse and keyboard, starts up KDE
-
-
-
-                                       gc, pixel
diff --git a/move/doc/errata.1 b/move/doc/errata.1
deleted file mode 100644
index 8f8924bbf..000000000
--- a/move/doc/errata.1
+++ /dev/null
@@ -1,44 +0,0 @@
-
-
-<p align="justify">Some users have encountered problems
-installing or using MandrakeMove due to specific configuration
-situations that we did not have an opportunity to fully test.
-Please use the patches or recommendations included below for each
-scenario if it applies to you.</p>
-
-<p align="justify"><b>Note on using Patches:</b> To use any of
-the <i>patch.pl</i> patches that are noted below, you must copy the
-appropriate patch onto a floppy disk, with the name patch.pl.
-Then you can boot off of your CD-ROM with the "linux patch"
-command at the boot prompt (obtained by pressing F1 at the splash
-screen), and making sure that the floppy containing the patch is
-in the floppy disk drive.</p>
-
-
-<p>
-<a name="webcam"></a>
-
-<i>Error scenario:</i> <b>no program seem to see my webcam, whereas on
-regular Mandrake 9.2 it works perfectly (may apply to other USB
-devices as well).</b>
-
-<br><i>Why:</i> "hotplug" automatic loading of drivers is disabled due to a
-bug on our side.
-
-<br><i>Solution:</i> add the following to the last line of
-/etc/rc.d/rc.local :
-<pre>
-sysctl -w kernel.hotplug=/sbin/hotplug
-</pre>
-and be sure to plug your webcam after boot and KDE startup is
-finished, not before booting.
-
-<br><i>Solution for download version:</i> run the following
-command in a console at the end of KDE startup, and then plug in
-your webcam:
-<pre>
-sysctl -w kernel.hotplug=/sbin/hotplug
-</pre>
-
-</p>
-
diff --git a/move/etc-monitorer.pl b/move/etc-monitorer.pl
deleted file mode 100755
index 231b9f772..000000000
--- a/move/etc-monitorer.pl
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-sub outpend { my $f = shift; local *F; open F, ">>$f" or die "outpend in file $f failed: $!\n"; print F foreach @_ }
-sub logit { outpend "/var/log/etc-monitorer.log", sprintf("[%s] @_\n", chomp_(`date`)) }
-
-foreach my $dir (@ARGV) {
-    my $destdir = '/home/.sysconf/' . cat_('/var/lib/machine_ident');
-    my @etcfiles = glob_("$dir/*");
-    foreach (@etcfiles) {
-        if ($_ eq '/etc/sudoers'           #- /etc/sudoers can't be a link
-	    || $_ eq '/etc/mtab'           #- same for /etc/mtab
-            || !-f                                 
-            || -l && readlink =~ m|^/|) {  #- we want to trap relative symlinks only
-            next;
-        }
-        my $dest = "$destdir$_";
-        mkdir_p(dirname($dest));  #- case of newly created directories
-        logit("restoring broken symlink $_ -> $dest");
-        if (-l) {
-            system("cp $_ $dest 2>/dev/null");
-        } else {
-            system("mv $_ $dest 2>/dev/null");
-        }
-        symlinkf($dest, $_);
-    }
-    foreach (difference2([ grep { -f && s/^\Q$destdir\E// } glob_("$destdir$dir/*") ], [ @etcfiles ])) {
-        logit("removing $destdir$_ because of deleted $_");
-        unlink "$destdir$_";
-    }
-}
diff --git a/move/img/FE92-1024-MOVE1.jpg b/move/img/FE92-1024-MOVE1.jpg
deleted file mode 100644
index 4abb003a3..000000000
--- a/move/img/FE92-1024-MOVE1.jpg
+++ /dev/null
diff --git a/move/img/FE92-1024-MOVE2.jpg b/move/img/FE92-1024-MOVE2.jpg
deleted file mode 100644
index 46af01bec..000000000
--- a/move/img/FE92-1024-MOVE2.jpg
+++ /dev/null
diff --git a/move/img/FE92-1024-MOVE3.jpg b/move/img/FE92-1024-MOVE3.jpg
deleted file mode 100644
index 32c7debdc..000000000
--- a/move/img/FE92-1024-MOVE3.jpg
+++ /dev/null
diff --git a/move/img/FE92-1024-MOVE4.jpg b/move/img/FE92-1024-MOVE4.jpg
deleted file mode 100644
index d3340b9c9..000000000
--- a/move/img/FE92-1024-MOVE4.jpg
+++ /dev/null
diff --git a/move/img/FE92-1024-MOVE5.jpg b/move/img/FE92-1024-MOVE5.jpg
deleted file mode 100644
index c3e3fd7d0..000000000
--- a/move/img/FE92-1024-MOVE5.jpg
+++ /dev/null
diff --git a/move/img/FE92-1280-MOVE1.jpg b/move/img/FE92-1280-MOVE1.jpg
deleted file mode 100644
index cc11b0b0c..000000000
--- a/move/img/FE92-1280-MOVE1.jpg
+++ /dev/null
diff --git a/move/img/FE92-1280-MOVE2.jpg b/move/img/FE92-1280-MOVE2.jpg
deleted file mode 100644
index bee10753f..000000000
--- a/move/img/FE92-1280-MOVE2.jpg
+++ /dev/null
diff --git a/move/img/FE92-1280-MOVE3.jpg b/move/img/FE92-1280-MOVE3.jpg
deleted file mode 100644
index 17135e024..000000000
--- a/move/img/FE92-1280-MOVE3.jpg
+++ /dev/null
diff --git a/move/img/FE92-1280-MOVE4.jpg b/move/img/FE92-1280-MOVE4.jpg
deleted file mode 100644
index 545643e68..000000000
--- a/move/img/FE92-1280-MOVE4.jpg
+++ /dev/null
diff --git a/move/img/FE92-1280-MOVE5.jpg b/move/img/FE92-1280-MOVE5.jpg
deleted file mode 100644
index cafbbcaf6..000000000
--- a/move/img/FE92-1280-MOVE5.jpg
+++ /dev/null
diff --git a/move/img/Mandrake.png b/move/img/Mandrake.png
deleted file mode 100644
index 0f7577e65..000000000
--- a/move/img/Mandrake.png
+++ /dev/null
diff --git a/move/isolinux/.cvsignore b/move/isolinux/.cvsignore
deleted file mode 100644
index a7edff342..000000000
--- a/move/isolinux/.cvsignore
+++ /dev/null
@@ -1,4 +0,0 @@
-boot.msg
-all.rdz
-isolinux.bin
-vmlinuz
diff --git a/move/isolinux/help.msg b/move/isolinux/help.msg
deleted file mode 100644
index 3f89e4f11..000000000
--- a/move/isolinux/help.msg
+++ /dev/null
diff --git a/move/isolinux/isolinux.cfg b/move/isolinux/isolinux.cfg
deleted file mode 100644
index 1b734525d..000000000
--- a/move/isolinux/isolinux.cfg
+++ /dev/null
@@ -1,14 +0,0 @@
-default linux
-prompt 1
-timeout 150
-display boot.msg
-F1 help.msg
-F2 boot.msg
-
-label linux
-  kernel vmlinuz
-  append initrd=all.rdz acpi=ht quiet devfs=nomount automatic=method:cdrom
-
-label acpi
-  kernel vmlinuz
-  append initrd=all.rdz quiet devfs=nomount automatic=method:cdrom
diff --git a/move/isolinux/make.pl b/move/isolinux/make.pl
deleted file mode 100644
index 4a946fd98..000000000
--- a/move/isolinux/make.pl
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-output 'help.msg', pack("C*", 0x0E, 0x80, 0x03, 0x00),
-"
-                  0aWelcome to 09Move0a help07
-
-In most cases, the best way to get started is to simply press the 0e<Enter>07 key.
-If you experience problems, you can try to add on the command line :
-
- o  0fnoauto07 to disable automatic detection (generally used with 0fexpert07).
- o  0fupdatemodules07 to use the special update floppy containing modules updates.
- o  0fpatch07 to use a patch from the floppy (file named 09patch.pl07).
- o  0fcleankey07 to remove previously saved system config files from the USB key.
- o  0fformatkey07 to format the USB key (ie: erase all data)
- o  0fwaitkey07 to wait 15 more seconds at boot time while detecting the USB key,
-    that might be useful for some keys for which detection doesn't work nicely
- o  0fvirtual_key=09/dev/hda10f,09/key07 to use file 09/key07 on device 09/dev/hda107 as a
-    virtual key instead of a physical one (must be an existing file containing
-    a valid filesystem - e.g. a loopback).
-
-You can also pass some 0f<specific kernel options>07 to the Linux kernel. 
-For example, try 0flinux mem=128M07 if your system has 128Mb of RAM but we
-don't detect the amount correctly.
-0cNOTE07: You cannot pass options to modules (SCSI, ethernet card) or devices
-such as CD-ROM drives in this way. If you need to do so, use expert mode.
-
-0c[F1-Help] [F2-Main]07\n";
diff --git a/move/make_live b/move/make_live
deleted file mode 100755
index 0ddca9ace..000000000
--- a/move/make_live
+++ /dev/null
@@ -1,268 +0,0 @@
-#!/usr/bin/perl
-
-use lib "../perl-install";
-use common;
-use pkgs;
-use lang;
-
-@ARGV <= 1 or die "usage: make_live [live_location=/tmp/live_tree]\n";
-
-my $kernel_version = do {
-    my @l = glob_('/export/Mandrake/RPMS/kernel-2.6*');
-    @l >= 1 or die "can't find kernel";
-    @l <= 1 or die "too many kernels";
-    first(`rpm -qp --qf '%{name}' $l[0]` =~ /kernel-(.*)/);
-};
-
-sub installPackages() {
-    output_p("$::prefix/etc/rpm/macros", "%_install_langs all\n");
-    rename '/etc/rpm/macros', '/etc/rpm/macros.';
-    system('cp', "$::prefix/etc/rpm/macros", '/etc/rpm/macros');
-
-    mkdir_p("$::prefix/var/lib/rpm");
-    mkdir_p("$::prefix/root/drakx");
-
-
-    undef *install_any::setDefaultPackages;
-    *install_any::setDefaultPackages = sub {};
-
-    undef *install_any::getFile;
-    *install_any::getFile = sub {
-	my ($f, $o_method) = @_;
-	log::l("getFile $f:$o_method");
-	open(my $F, '/export/' . install_any::relGetFile($f)) or return;
-	$F;
-    };
-
-    undef *c::kernel_version;
-    *c::kernel_version = sub { $kernel_version };
-
-    install_any::setPackages(my $o = $::o = { 
-					     prefix => $::prefix, 
-					     meta_class => 'desktop', 
-					     default_packages => [
-                                 qw(XFree86-server XFree86-xfs XFree86-FBDev),
-				 qw(openssh-server), #- fred wants it
-				 qw(alsa-utils newt), #- newt
-				 qw(davfs nfs-utils samba-server sane-backends xsane xsane-gimp ntp),
-                                 qw(acpi acpid), #- so that removing acpi=ht will work
-				 qw(mountloop),	#- crypted folders
-				 qw(dnotify),	#- notification of /etc changes
-                                 qw(mandrake-doc-drakxtools-en mandrake-doc-drakxtools-fr mandrake-doc-drakxtools-es mandrake-doc-drakxtools-it),
-				 qw(synaptics),
-				 #- network conf:
-				 qw(wireless-tools pcmcia-cs),
-				 #- zeroconf:
-				 qw(zcip dhcpcd tmdns),
-				 #- cnx stuff:
-				 qw(dhcp-client ppp kdenetwork-kppp ppp-pppoatm ppp-pppoe pptp-linux pptp-adsl rp-pppoe),
-				 #- ISDN stuff:
-				 qw(isdn4net ibod isdn4k-utils),
-				 #- network file sharing:
-				 qw(nfs-utils-clients samba-client),
-				 #- network drivers and firmwares:
-				 qw(eagle-usb speedtouch speedtouch_mgmt unicorn),
-                                 qw(cups cups-drivers foomatic-db gimpprint hpoj libnet-snmp mtools mtoolsfm nmap printer-filters printer-testpages printer-utils scli xojpanel xpp), #- printer stuff
-				 qw(ATI_GLX ATI_GLX-utils NVIDIA_GLX),
-				 qw(hcfpcimodem hsflinmodem ltmodem ipw2100),
-				 qw(nxclient), #- proprietary soft from powerpack
-				 qw(xinput), #- for some mice
-                                 qw(perl-Term-Readline-Gnu binutils bash-completion),  #- allow debugging move
-                                 qw(openssh-askpass-gnome),  #- openssh-askpass for mountloop doesn't allow to click on ok/cancel buttons
-                                 qw(clanbomber freeciv-client freeciv-server crack-attack kdegames),  #- more games
-                                 qw(numlock shorewall clamav unison mozilla),
-                                 qw(xawtv zapping),  #- tv apps
-                                 qw(scribus scribus-i18n-de scribus-i18n-fr),  #- John Jablonski says it's so much useful
-                                                                 ],
-					    });
-
-    my %compssUsersChoice = map { $_ => 1 } map { @{$_->{flags}} } values %{$o->{compssUsers}};
-    $compssUsersChoice{$_} = 1 foreach qw(SYSTEM DVD USB SOUND BURNER UTF8 DOCS TV 3D INSTALL PHOTO);
-    $compssUsersChoice{qq(LOCALES"$_")} = 1 foreach lang::langsLANGUAGE({ all => 1 });
-
-    #- we don't want those
-    foreach (qw(mdkonline quanta)) {
-	my $pkg = pkgs::packageByName($o->{packages}, $_) or die "$_ not there anymore";
-	$pkg->set_rate(0);
-    }
-
-    pkgs::setSelectedFromCompssList($o->{packages}, \%compssUsersChoice, 4, 0);
-
-    my @toInstall = pkgs::packagesToInstall($o->{packages});
-    local $ENV{DURING_INSTALL} = 1;
-    $ENV{LD_LIBRARY_PATH} = "/lib:/usr/lib:/usr/X11R6/lib:/usr/lib/qt3/lib";
-    pkgs::install($::prefix, 0, \@toInstall, $o->{packages});
-
-    eval { fs::umount("$::prefix/proc") };
-
-    unlink "/etc/rpm/macros";
-    rename "/etc/rpm/macros.", "/etc/rpm/macros";
-}
-
-sub config_X_proprietary_drivers() {
-    unlink "$::prefix/usr/lib/libGL.so";
-
-    my %name_to_Driver = (NVIDIA_GLX => 'nvidia', ATI_GLX => 'fglrx');
-
-    my $lib = 'libGL.so.1';
-    symlinkf("/etc/X11/$lib", "$::prefix/usr/lib/$lib");
-    foreach (keys %name_to_Driver) {
-	my ($full_name) = run_program::rooted_get_stdout($::prefix, 'rpm', '-ql', $_) =~ m!/usr/lib/(\Q$lib\E\..*)! or die '';
-	symlinkf($full_name, "$::prefix/usr/lib/$lib.$name_to_Driver{$_}");
-    }
-
-    #- nvidia's libglx.so is hardwired to the tls version, change this
-    system("cd $::prefix/usr/X11R6/lib/modules/extensions ; ln -sf libglx.so.* libglx.so");
-
-    #- remove the dirty hack done by NVIDIA_kernel-xxx proprietary package
-    #- we do it by hand when needed
-    substInFile { $_ = '' if $_ eq 'nvidia' } "$::prefix/etc/modules";
-}
-
-$::prefix = `make get_dest_livetree`;
-print "Making live in $::prefix directory.\n";
-
-eval { fs::umount("$::prefix/proc") };
-eval { rm_rf($::prefix) };
-output_p("$::prefix/etc/fstab", "none /proc proc defaults 0 0\n");
-
-installPackages();
-
-run_program::rooted($::prefix, 'ldconfig');
-any::fix_broken_alternatives();
-run_program::rooted($::prefix, 'fc-cache');  #- generate cache in all directories mentioned in config file
-
-run_program::rooted_or_die($::prefix, '/usr/lib/mozilla-1.6/mozilla-rebuild-databases.pl');
-
-    #- system
-
-# de-complexify, use the default on any arch
-eval { rm_rf("$::prefix$_") } foreach '/lib/i686', '/lib/tls', '/usr/lib/tls', '/usr/X11R6/lib/tls', '/usr/X11R6/lib/modules/extensions/tls', '/usr/X11R6/lib/modules/dri/tls';
-
-eval { config_X_proprietary_drivers() };
-
-substInFile {
-    #- /lib is ro, for the moment we don't save, we'll see later if we may want to save (using /var/dev-state for example)
-    s|.*lib/dev-state.*||;
-} "$::prefix/etc/devfsd.conf";
-
-substInFile {
-    #- don't use shadow passwords since pwconv overwrites /etc/shadow hence contents will be lost for usb key
-    s|\s*shadow||;
-} "$::prefix/etc/pam.d/system-auth";
-
-substInFile { 
-    #- remove this line which D-state mounting /home again
-    #- we don't know what this line is for
-    $_ = "# $_" if /Mounting other filesystems/;
-} "$::prefix/etc/init.d/netfs";
-
-#- remove services we start ourselves from chkconfig system
-substInFile {
-    s|chkconfig:|chkconfig-disabled:|;
-} "$::prefix/etc/rc.d/init.d/$_" foreach qw(xfs dm devfsd syslog);
-
-#- we're not using sysv init, we need to replace these
-unlink "$::prefix/sbin/$_" foreach qw(halt reboot);
-
-#- provide a way for speedtouch users of free version to escape
-if (!-e "$::prefix/usr/share/speedtouch/mgmt.o") {
-    symlink '/etc/mgmt.o', "$::prefix/usr/share/speedtouch/mgmt.o";
-}
-
-#- we don't want everyone to have the same ssh key :)
-system("rm -f $::prefix/etc/ssh/*key*");
-
-
-    #- XFree
-
-#- don't want the relative path, prefering the absolute path
-symlinkf('/var/lib/xkb', "$::prefix/etc/X11/xkb/compiled"); 
-
-#- Xsession wants to start first-time
-unlink "$::prefix/usr/X11R6/bin/drakfw";
-
-
-    #- KDE
-
-unlink "$::prefix/usr/share/autostart/$_.desktop" foreach 'klipper', 'korgac', 'kalarmd.autostart';
-
-update_gnomekderc("$::prefix/usr/share/config/kdesktoprc", ScreenSaver => (Lock => 'true'));
-
-#- remove "Login Manager" module from kcontrol, rpmdrake stuff
-unlink "$::prefix/usr/lib/menu/$_" foreach qw(kdebase-kdm rpmdrake);
-
-touch("$::prefix/etc/menu/enable_simplified");
-
-substInFile {
-    s/mandrake_doc-(en|fr)/mandrake_doc-move-$1/g;
-    $_ = '' if m!/usr/sbin/drakbackup!;
-} "$::prefix/usr/lib/menu/simplified/mandrake_desk";
-
-substInFile {
-    s!/es/Starter.html/!/en/Starter.html/!;
-} "$::prefix/usr/share/mdk/mandrakegalaxy/mdkgalaxy-es.html";
-
-substInFile {
-    if (!/mimetypes=/) {
-	chomp;
-	$_ .= ' mimetypes="image/gif;image/jpeg;image/png;image/tiff;image/x-xbm;image/x-xpm;image/bmp;image/fits;image/pcx;image/pix;image/pnm;image/x-bmp"';
-	$_ .= ' kde_opt="InitialPreference=15"' . "\n";
-    }
-} "$::prefix/usr/lib/menu/gqview";
-
-{
-    local $ENV{LC_ALL} = 'en_US'; #- update-menus doesn't work when there is no locale (aka locale "C")
-    local $ENV{HOME} = '/'; #- savekdemimetypes.pl needs this otherwise it's tmp file fails
-    run_program::rooted($::prefix, 'update-menus', '-n');
-}
-
-run_program::rooted($::prefix, 'nspluginscan'); #- must be run before kbuildsycoca for the ksycoca to be flash plugin aware
-
-$ENV{HELP_BROWSER} = "kfmclient openProfile webbrowsing";
-$ENV{BROWSER} = "kfmclient openProfile webbrowsing";
-$ENV{DESKTOP} = "kde";
-foreach my $lang (lang::list_langs()) {
-    local $ENV{LC_ALL} = lang::getLANGUAGE($lang);
-    unlink "$::prefix/usr/share/services/ksycoca";
-    run_program::rooted($::prefix, 'kbuildsycoca', '--global');
-    rename("$::prefix/usr/share/services/ksycoca", "$::prefix/usr/share/services/ksycoca-$lang");
-}
-symlinkf('/etc/X11/ksycoca', "$::prefix/usr/share/services/ksycoca");
-
-cp_af("$::prefix/usr/share/applnk-mdk/System/Configuration/Hardware/krandrtray.desktop", "$::prefix/usr/share/autostart");
-
-    #- Mandrake
-
-substInFile {
-    s|Mandrake Linux release (\S+) \(.*\)|Mandrake Move release $1 (Moyoto)|;
-} "$::prefix/etc/mandrake-release";
-
-#- remove documentation link in mdkgalaxy
-foreach (glob("$::prefix/usr/share/mdk/mandrakegalaxy/mdkgalaxy-*.html")) {
-    my $nb;
-    substInFile {
-	if (m!/Starter.html! ... m!^\s*</td>$!) {
-	    $_ = '';
-	    $nb++;
-	}
-    } $_;
-    $nb % 4 == 0 or die "bad $_\n";
-}
-
-rm_rf("$::prefix/usr/share/locale/en_ZA");
-
-#- remove uncessary wizards, especially from appearing in MCC
-unlink "$::prefix/usr/sbin/$_" foreach qw(drakautoinst drakboot drakfloppy drakgw drakbackup drakedm drakfont drakperm draksec rpmdrake MandrakeUpdate rpmdrake-remove edit-urpm-sources.pl);
-unlink "$::prefix/usr/bin/$_" foreach qw(userdrake);
-
-#- selecting language must be done from drakx anyway
-unlink "$::prefix/usr/bin/localedrake";
-
-#- fix openoffice autopilote feature
-foreach (glob("$::prefix/usr/lib/openoffice/share/template/*")) {
-    symlink '../../english/wizard/bitmap', "$_/wizard/bitmap";
-}
-
-# fix nxclient 
-system("chmod a+x $::prefix/etc/profile.d/nx*");
diff --git a/move/make_live_tree_boot b/move/make_live_tree_boot
deleted file mode 100755
index e7cd9d617..000000000
--- a/move/make_live_tree_boot
+++ /dev/null
@@ -1,177 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(../perl-install);
-use common;
-use lang;
-use Getopt::Long;
-
-GetOptions(u => \ (my $un_build)) or die '';
-
-my $prefix = $ARGV[0] || `make get_dest_livetree`;
-
-
-sub create_light_tree {
-    my ($livetree_prefix, $live_name, $list) = @_;
-    my $light_prefix = $prefix . '_' . $live_name;
-
-    -e $light_prefix and die "you can't make_live_tree_boot since one already exists
-Maybe you should remove it first with 'make_live_tree_boot -u'\n";
-
-    foreach my $f (@$list) {
-	my $dest = "$light_prefix$f";
-	my $orig = "$livetree_prefix$f";
-
-	mkdir_p(dirname($dest));
-
-	if (-l $orig) {
-	    symlink readlink($orig), $dest;
-	} else {
-	    my $link = $orig;
-	    $link =~ s|^$livetree_prefix|/image_$live_name|;
-
-	    rename $orig, $dest or die "moving $orig to $dest failed: $!\n";
-	    symlink $link, $orig or die "symlinking from $dest to $orig failed: $!\n";
-	}
-    }
-}
-
-sub create_totem_links {
-    my ($live_name, $list) = @_;
-    my $light_prefix = $prefix . '_' . $live_name;
-
-    #- creating all the dirs, even when things are in the "always" tree
-    foreach my $f (@$list) {
-	my $dest = "$light_prefix$f";
-	my $orig = "$prefix$f";
-	mkdir_p(dirname($dest)) if ! (-e $dest || -l $dest);
-
-	if (-l $orig) {
-	    symlink readlink($orig), $dest;
-	}
-    }
-
-    foreach my $dir (chomp_(`cd $light_prefix ; find usr -type d`)) {
-	foreach my $f (all("$prefix/$dir")) {
-	    my $link;
-	    my $fl = $f;
-	    while (my $l = readlink("$prefix/$dir/$fl")) {
-		if ($l =~ /^\w/) {
-		    $fl = $l;
-		    next;
-		} elsif ($l =~ m!^/!) {
-		    $link = $l;
-		}
-		last;
-	    }
-	    $link ||= "/image/$dir/$fl";
-	    symlink $link, "$light_prefix/$dir/$f";
-	}
-    }
-}
-
-sub remove_light_tree {
-    my ($live_name, $list) = @_;
-    my $light_prefix = $prefix . '_' . $live_name;
-
-    -d $light_prefix or return;
-
-    foreach my $f (@$list) {
-	my $dest = "$prefix$f";
-	my $orig = "$light_prefix$f";
-
-	if (-l $orig) {
-	    unlink $orig;
-	} elsif (-e $orig) {
-	    if (-e $dest && -s $dest != -s $orig) {
-		warn "ERROR: $dest already exist, skipping\n";
-	    } elsif (!-d $dest || -l $dest) {
-		unlink $dest or die "removing $dest failed: $!\n";
-		rename $orig, $dest or die "moving $orig to $dest failed: $!\n";
-	    }
-	}
-    }
-    rmdir($_) foreach reverse(chomp_(`find $light_prefix -type d`));
-
-    if (-e $light_prefix) {
-	unlink($_) foreach chomp_(`find $light_prefix -type l`);
-
-	foreach my $orig (chomp_(`find $light_prefix -type f`)) {
-	    my $dest = $orig;
-	    $dest =~ s|^$light_prefix|$prefix|;
-	    if (my $orig2 = readlink($dest)) {
-		$orig2 =~ s!/image_$live_name/!$light_prefix/! or next;
-		$orig2 eq $orig or next;
-	    } else {
-		next if -e $dest && -s $dest != -s $orig;
-	    }
-	    unlink $dest or die "removing $dest failed: $!\n";
-	    rename $orig, $dest or die "moving $orig to $dest failed: $!\n";
-	}
-	system("rm -rf $light_prefix/usr/bin/stage2/*.pm");
-	system("rm -rf $light_prefix/usr/lib/libDrakX/*.pm");
-	system("rm -rf $light_prefix/usr/share/langs/*.png");
-
-	rmdir($_) foreach reverse(chomp_(`find $light_prefix -type d`));
-    }
-
-    if (-e $light_prefix) {
-	print "still there:\n";
-	system('find', $light_prefix);
-    }
-}
-my @i18n = map { if_(/i18n_(.*)\.list$/, $1) } all('data');
-my @clps = ('always', 'boot', 'totem', 'nvidia', map { "i18n_$_" } @i18n);
-
-my %lists = map {
-    $_ => [ chomp_(cat_("data/$_.list")) ];
-} @clps, 'always_i18n';
-
-my %i18n_to_locales = do {
-    my %useful = map { lang::l2locale($_) => 1 } lang::list_langs();
-    map_each {
-	if (my ($i18n) = $::a =~ /i18n_(.*)/) {
-	    $i18n => [ map { if_(m!^/usr/share/locale/([^/]*)! && $useful{$1}, $1) } @$::b ];
-	} else {
-	    ();
-	}
-    } %lists;
-};
-
-
-$lists{always_simpl} = [ uniq(@{$lists{always}}, intersection($lists{boot}, $lists{totem})) ];
-$lists{boot_simpl} = [ difference2($lists{boot}, $lists{always_simpl}) ];
-$lists{totem_simpl} = [ difference2($lists{totem}, $lists{always_simpl}) ];
-
-foreach (@clps, map { "always_i18n_$_" } @i18n) {
-    remove_light_tree($_, $lists{$_ . '_simpl'} || $lists{$_} || []);
-}
-
-if (!$un_build) {
-    foreach my $i18n (@i18n) {
-	$lists{"always_i18n_$i18n"} = [ map {
-	    my $pattern = $_;
-	    my @l = map {
-		(my $f = $pattern) =~ s/__LANG__/$_/;
-		if (readlink("$prefix$f") =~ m!^[^/]!) {
-		    system('cp', "$prefix$f", "$prefix$f-");
-		    rename "$prefix$f-", "$prefix$f";
-		    $f;
-		} elsif (-e "$prefix$f") {
-		    $f;
-		} else {
-		    ();
-		}
-	    } $i18n, @{$i18n_to_locales{$i18n}};
-	} @{$lists{always_i18n}} ];
-    }
-
-    foreach my $i18n (@i18n) {
-	create_light_tree($prefix, "always_i18n_$i18n", $lists{"always_i18n_$i18n"});
-    }
-    foreach (@clps) {
-	my $list = $lists{$_ . '_simpl'} || $lists{$_};
-	next if $_ eq 'nvidia' && ! -e "$prefix$list->[0]";
-	create_light_tree($prefix, $_, $list);
-    }
-    create_totem_links('totem', $lists{totem});
-}
diff --git a/move/move.pm b/move/move.pm
deleted file mode 100644
index 1ca46710f..000000000
--- a/move/move.pm
+++ /dev/null
@@ -1,809 +0,0 @@
-package move; # $Id$ $
-
-#- Copyright (c) 2003-2004 Mandriva
-#-
-#- This program is free software; you can redistribute it and/or modify
-#- it under the terms of the GNU General Public License as published by
-#- the Free Software Foundation; either version 2, or (at your option)
-#- any later version.
-#-
-#- This program is distributed in the hope that it will be useful,
-#- but WITHOUT ANY WARRANTY; without even the implied warranty of
-#- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#- GNU General Public License for more details.
-#-
-#- You should have received a copy of the GNU General Public License
-#- along with this program; if not, write to the Free Software
-#- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use diagnostics;
-use strict;
-
-use modules;
-use common;
-use fs;
-use fsedit;
-use run_program;
-use partition_table qw(:types);
-use swap;
-use log;
-use lang;
-use Digest::MD5 qw(md5_hex);
-
-my $key_disabled;
-
-my ($using_existing_user_config, $using_existing_host_config);
-my $key_sysconf = '/home/.sysconf';
-my $key_part;
-my $virtual_key_part;
-my $key_mountopts = 'umask=077,uid=501,gid=501,shortname=mixed,nobadchars';
-
-sub symlinkf_short {
-    my ($dest, $file) = @_;
-    if (my $l = readlink $dest) {
-	$dest = $l if $l =~ m!^/!;
-    }
-    -d $file and log::l("$file already exists and is a directory! writing in directory may be needed, not overwriting"), return;
-    symlinkf($dest, $file);
-}
-
-sub handle_etcfiles {
-    my (@allowed_modes) = @_;
-    #- non-trivial files listed from tools/scan-etc.pl
-    my ($mode, $allowed);
-    foreach (chomp_(cat_('/image/move/etcfiles'))) {
-        if (m|^# (\S+)|) {
-	    $mode = $1;
-	    $allowed = member($mode, @allowed_modes);
-	} elsif (m|^/| && $allowed) {
-            if ($mode eq 'READ') {
-                mkdir_p(dirname($_));
-		symlinkf_short("/image$_", $_) if !-e $_;
-	    } elsif ($mode eq 'OVERWRITE') {
-                mkdir_p(dirname($_));
-                cp_f("/image$_", $_);  #- need copy contents
-            } elsif ($mode eq 'DIR') {
-		mkdir_p $_;
-	    }
-        }
-    }
-
-}
-
-sub handle_virtual_key() {
-    return if $key_disabled;
-    if (my ($device, $file, $options) = cat_('/proc/cmdline') =~ /\bvirtual_key=([^,\s]+),([^,\s]+)(,\S+)?/) {
-        log::l("using device=$device file=$file as a virtual key with options $options");
-        my $dir = '/virtual_key_mount';
-        mkdir $dir;
-        run_program::run('mount', $device, $dir);
-        if ($options =~ /format/) {
-	    if (! -e "$dir$file") {
-		require commands;
-		commands::dd("if=/dev/zero", "of=$dir$file", "bs=1M", "count=40");
-	    }
-	    run_program::run('mkdosfs', "$dir$file");
-	}
-        require devices;
-        my $loop = devices::find_free_loop();
-        run_program::run('losetup', $loop, "$dir$file");
-        run_program::run('mount', $loop, '/home', '-o', $key_mountopts);
-	$virtual_key_part = { device => $loop, mntpoint => '/home', type => 0xc, isMounted => 1 };
-    }
-}
-
-sub setup_userconf {
-    my ($o) = @_;
-    if (is_empty_array_ref($o->{users}) && `getent passwd 501` =~ /([^:]+):/) {
-        log::l("passwd/501 is $1");
-        $o->{users} = [ { name => $1 } ];
-	$ENV{HOME} = "/home/$1"; #- used by lang::read()  :-/
-        print "using existing user configuration\n";
-        $using_existing_user_config = 1;
-    }
-}
-
-sub lang2move_clp_name {
-    my ($lang) = @_;
-    my $dir = '/usr/share/locale/' . lang::l2locale($lang);
-    my $link = readlink($dir) or return -d $dir ? '' : 'ERROR';
-    my ($name) = $link =~ m!image_(i18n_.*?)/! or log::l("ERROR: bad link $link for $dir"), return 'ERROR';
-    $name;
-}
-
-#- run very soon at stage2 start, setup things on tmpfs rw / that
-#- were not necessary to start stage2 itself (there were setup
-#- by stage1 of course)
-sub init {
-    my ($o) = @_;
-
-    $::testing and goto drakx_stuff;
-
-    #- rw things
-    mkdir "/$_" foreach qw(home mnt root root/tmp etc var);
-
-    mkdir "/etc/$_" foreach qw(X11);
-    touch '/etc/modules.conf';
-    touch '/etc/modprobe.conf';
-    cp_f('/proc/mounts', '/etc/mtab');
-
-    #- these files need be writable but we need a sensible first contents
-    cp_f("/image/etc/$_", '/etc') foreach qw(passwd passwd- group sudoers fstab);
-
-    #- these files are typically opened in read-write mode, we need them copied
-    mkdir_p("/etc/$_"), cp_f(glob_("/image/etc/$_/*"), "/etc/$_")
-      foreach qw(cups profile.d sysconfig devfs/conf.d);
-
-    #- TODO: cp_af is broken for symlinks to directories
-    #- replace below with cp_af is fixed in perl-MDK-Common
-    run_program::run('cp', '-a', glob("/image/etc/rc[0-6].d"), '/etc');
-
-    #- directories we badly need as non-links because files will be written in
-    handle_etcfiles('DIR');
- 
-    #- for /etc/sysconfig/networking/ifcfg-lo
-    mkdir "/etc/sysconfig/networking";
-
-    #- ro things
-    symlinkf_short("/image/etc/$_", "/etc/$_")
-      foreach qw(alternatives man.config services shells pam.d inputrc ld.so.conf 
-                 DIR_COLORS bashrc profile init.d devfsd.conf gtk-2.0 pango fonts modules.devfs 
-                 dynamic hotplug gnome-vfs-2.0 gnome-vfs-mime-magic gtk gconf menu menu-methods nsswitch.conf default login.defs 
-                 skel ld.so.cache openoffice xinetd.d xinetd.conf syslog.conf sysctl.conf sysconfig/networking/ifcfg-lo
-                 ifplugd);
-    symlinkf_short("/image/etc/X11/$_", "/etc/X11/$_")
-      foreach qw(encodings.dir app-defaults applnk fs lbxproxy proxymngr rstart wmsession.d xinit xkb xserver xsm);
-    symlinkf_short("/image/root/$_", "/root/$_") foreach qw(.bashrc);
-
-    mkdir_p(dirname("/var/$_")), symlinkf_short("/image/var/$_", "/var/$_") foreach qw(lib/samba lib/rpm cache/gstreamer-0.6);
-
-    #- non-trivial files/directories that need be readable, files that will be overwritten
-    handle_etcfiles('READ', 'OVERWRITE');
-
-    run_program::run('chown', 'clamav.clamav', '/var/log/clamav/freshclam.log');
-
-    #- create remaining /etc and /var subdirectories if not already copied or symlinked,
-    #- because programs most often will not try to create the missing subdir before trying
-    #- to write a file, leading to obscure unexpected failures
-    foreach (cat_('/image/move/directories-to-create')) {
-	my ($mode, $uid, $gid, $name) = split;
-	next if -d $name;
-	mkdir($name);
-	chmod(oct($mode), $name);
-	chown($uid, $gid, $name);
-    }
-
-    chmod 01777, '/tmp', '/var/tmp';  #- /var/tmp -> badly needed for printing from OOo
-
-    #- remaining non existent /etc files are symlinked from the RO volume,
-    #- better to have them RO than non existent.
-    #- PB: problems arise when programs try to open then in O_WRONLY
-    #- or O_RDWR -> in that case, they should be handled in the
-    #- OVERWRITE section of data/etcfiles)
-    foreach (chomp_(cat_('/image/move/all-etcfiles'))) {
-        -f $_ or symlinkf_short("/image$_", $_);
-    }
-
-    #- free up stage1 memory
-    eval { fs::umount($_) } foreach qw(/stage1/proc/bus/usb /stage1/proc /stage1);
-
-    #- devfsd needed for devices accessed by old names
-    fs::mount("none", "/dev", "devfs", 0);
-    fs::mount("none", "/dev/pts", "devpts", 0);
-    run_program::run('/sbin/devfsd', '/dev');
-
-    -d '/lib/modules/' . c::kernel_version() or warn("ERROR: kernel package " . c::kernel_version() . " not installed\n"), c::_exit(1);
-
-    $key_disabled = !-e '/cdrom/live_tree_nvidia.clp' && cat_('/proc/mounts') !~ /nfs/;
-
-    run_program::run('/sbin/service', 'syslog', 'start');
-    run_program::run('sysctl', '-w', 'kernel.hotplug=/bin/true');
-    modules::load_category('bus/usb'); 
-    eval { modules::load('usb-storage', 'sd_mod') };
-    handle_virtual_key();
-    $o->{pcmcia} ||= !$::noauto && c::pcmcia_probe();
-    cat_('/proc/cmdline') =~ /\bwaitkey\b/ and sleep 15;
-    install_steps::setupSCSI($o);
-    run_program::run('sysctl', '-w', 'kernel.hotplug=/sbin/hotplug');
-
-    if (cat_('/proc/cmdline') =~ /\bformatkey\b/) {
-	#- waiting until X is launched
-    } else {
-	key_mount($o);
-    }
-    if (cat_('/proc/cmdline') =~ /\bcleankey\b/) {
-	eval { rm_rf $key_sysconf, glob_('/home/.mdkmove*') };
-    }
-    key_installfiles('simple');
-    setup_userconf($o);
-    if (-f '/etc/X11/X') {
-        print "using existing host configuration\n";
-        $using_existing_host_config = 1;
-
-	#- so that /etc/devfsd/conf.d/mouse.conf is used and /dev/mouse created
-	run_program::run('/sbin/service', 'devfsd', 'reload');
-    }
-    if (-s '/etc/sysconfig/i18n') {
-        lang::set($o->{locale} = lang::read('', 0)); #- read ~/.i18n first if it exists
-    }
-
-    touch '/var/run/rebootctl';
-
-drakx_stuff:
-    $o->{steps}{$_} = { reachable => 1, text => $_ }
-      foreach qw(initGraphical autoSelectLanguage verifyKey configMove startMove);
-    $o->{orderedSteps_orig} = $o->{orderedSteps};
-    $o->{orderedSteps} = [ $using_existing_host_config ?
-                           qw(initGraphical verifyKey startMove)
-                         : $using_existing_user_config ?
-                           qw(initGraphical autoSelectLanguage verifyKey selectMouse selectKeyboard configMove startMove)
-                         : qw(initGraphical selectLanguage acceptLicense verifyKey selectMouse selectKeyboard configMove startMove) ];
-    $o->{steps}{first} = $o->{orderedSteps}[0];
-
-    #- do not use shadow passwords since pwconv overwrites /etc/shadow hence contents will be lost for usb key
-    delete $o->{authentication}{shadow};
-
-    foreach my $lang (keys %lang::langs) {
-	my $clp_name = lang2move_clp_name($lang) or next;
-	if (! -e "/cdrom/live_tree_$clp_name.clp") {
-	    log::l("disabling lang $lang");
-	    delete $lang::langs{$lang};
-	}
-    }
-}
-
-sub lomount_clp {
-    my ($name, $needed_file) = @_;
-    my ($clp, $dir) = ("/cdrom/live_tree_$name.clp", "/image_$name");
-
-    -e "$dir$needed_file" and return;
-
-    if (! -e $clp || cat_('/proc/cmdline') =~ /\blive\b/) {
-	symlink "/cdrom/live_tree_$name", $dir;
-	return;
-    }
-
-    log::l("lomount_clp: lomounting $name");
-
-    mkdir_p($dir);
-    my $dev = devices::find_free_loop();
-    run_program::run('losetup', '-r', '-e', 'gz', $dev, $clp);
-    run_program::run('mount', '-r', $dev, $dir);
-}
-
-sub install2::autoSelectLanguage {
-    my $o = $::o;
-
-    install_steps::selectLanguage($o);
-}
-
-sub handleI18NClp {
-    my ($lang) = @_;
-
-    my $clp_name = lang2move_clp_name($lang) or return;
-    log::l("move: handleI18NClp (lang=$lang, clp_name=$clp_name)");
-    lomount_clp($clp_name, '/usr');
-    lomount_clp("always_$clp_name", '/usr');
-}
-
-sub clean_partition_table_and_format_key {
-    my ($in) = @_;
-    my @keys = grep { detect_devices::isKeyUsb($_) } detect_devices::getSCSI() or return;
-    my $key = $in->ask_from_listf('', N("Which USB key do you want to format?"),
-				 sub { "$_->{usb_description} ($_->{device})" },
-				 \@keys);
-
-    $in->ask_warn('', N("You are about to format a USB device \"%s\". This will delete all data on it.
-Make sure that the selected device is the USB key you want to format. 
-We advise you to unplug all other USB storage devices while doing this operation.", $key->{usb_description}));
-
-    $key->{prefix} ||= $key->{device};
-    add2hash_($key, partition_table::raw::get_geometry($key->{file} = devices::make($key->{device})));
-    partition_table::raw::zero_MBR($key);
-    my ($part) = partition_table::get_normal_parts_and_holes($key);
-    $part->{type} = 0xb;
-    partition_table::add($key, $part);
-    partition_table::write($key);
-    fs::real_format_part($part);	
-}
-
-sub key_parts {
-    my ($o) = @_;
-
-    return () if $key_disabled;
-
-    my @keys = grep { detect_devices::isKeyUsb($_) } @{$o->{all_hds}{hds}};
-    my @parts = (fsedit::get_fstab(@keys), grep { detect_devices::isKeyUsb($_) } @{$o->{all_hds}{raw_hds}});
-    grep { isFat({ type => fsedit::typeOfPart($_->{device}) }) } @parts;
-}
-    
-sub key_mount {
-    my ($o, $o_reread) = @_;
-
-    if ($o_reread) {
-        $o->{all_hds} = fsedit::empty_all_hds();
-        install_any::getHds($o, $o);
-    }
-    if ($virtual_key_part) {
-        #- :/ merge_from_mtab did not got my virtual key, need to add it manually
-        push @{$o->{fstab}}, $virtual_key_part;
-	$key_part = $virtual_key_part;
-	return;
-    }
-
-    foreach (key_parts($o)) {
-	if ($key_part) {
-	    log::l("trying another usb key partition than $key_part->{device}");
-	    fs::umount_part($key_part);
-	    delete $key_part->{mntpoint};
-	    undef $key_part;
-	}
-	$_->{mntpoint} = '/home';
-	$_->{options} = "$key_mountopts,sync";
-	my $ok = eval { fs::mount_part($_); 1 };
-	if ($ok) {
-	    my ($kb_size) = MDK::Common::System::df('/home');
-	    log::l("$_->{device} is $kb_size KB");
-	    $ok = $kb_size > 10 * 1024; #- at least 10 MB
-	    fs::umount_part($_) if !$ok;
-	}
-	if ($ok) {
-	    $key_part = $_;
-	    last if -e $key_sysconf;
-	} else {
-	    delete $_->{mntpoint};
-	}
-    } 
-
-    
-}
-
-sub machine_ident() {
-    #- , c::get_hw_address('eth0');       before detect of network :(
-    md5_hex(join '', (map { (split)[1] } cat_('/proc/bus/pci/devices')));
-}
-
-sub key_installfiles {
-    my ($mode) = @_;
-
-    my $done if 0;
-    $done and return;
-
-    mkdir $key_sysconf;
-    my $sysconf = "$key_sysconf/" . machine_ident();
-
-    my $copy_userinfo = sub {
-        my (@files) = @_;
-        my @etcpasswords = glob("$key_sysconf/*/etc/passwd");
-        if (@etcpasswords > 1) {
-            print "inconsistency: more than one /etc/passwd on key! can not proceed, please clean the key\n";
-            exit 1;
-        }
-        return if !@etcpasswords;
-        my ($path) = $etcpasswords[0] =~ m|(.*)/etc/passwd|;
-        run_program::run('cp', '-f', "$path$_", $_) foreach @files;
-        run_program::run('rm', '-f', $etcpasswords[0]);
-    };
-
-    if (!-d $sysconf) {
-        if ($mode eq 'full') {
-            log::l("key_installfiles: installing config files in $sysconf");
-            mkdir $sysconf;
-            foreach (chomp_(cat_('/image/move/keyfiles'))) {
-                mkdir_p($sysconf . dirname($_));
-                my @l = /\*$/ ? glob_($_) : $_;
-		foreach (@l) {
-		    eval { cp_f($_, "$sysconf$_") };
-                    symlinkf("$sysconf$_", $_);
-                }
-            }
-            eval { cp_f('/image/move/README.adding.more.files', $key_sysconf) };
-            $done = 1;
-        } else {
-            #- not in full mode and no host directory, grab user config from first existing host directory if possible
-            log::l("key_installfiles: only looking for user config files");
-            $copy_userinfo->(qw(/etc/passwd /etc/group /etc/sysconfig/i18n));
-        }
-    } else {
-        log::l("key_installfiles: installing symlinks to key");
-        if (!-e "$sysconf/etc/passwd") {
-            log::l("key_installfiles: /etc/passwd not here, trying to copy from previous host boot");
-            $copy_userinfo->(qw(/etc/passwd /etc/group));
-        }
-        foreach (chomp_(`find $sysconf -type f`)) {
-            my ($path) = /^\Q$sysconf\E(.*)/;
-            mkdir_p(dirname($path));
-            symlinkf($_, $path);
-        }
-        $done = 1;
-        $::o->{steps}{configMove}{done} = 1;
-    }
-
-    #- /etc/sudoers can not be a link
-    unlink($_), cp_f("/image$_", $_) foreach qw(/etc/sudoers);
-}
-
-sub reboot() {
-    output('/var/run/rebootctl', "reboot");  #- tell X_move to not respawn
-    run_program::run('killall', 'X');  #- kill it ourselves to be sure that it will not lock console when killed by our init
-    exit 0;
-}
-
-
-sub check_key {
-    my ($o) = @_;
-
-    if ($key_part) {
-	my $tmp = '/home/.touched';
-	#- can we write?
-	if (eval { output($tmp, 'foo'); cat_($tmp) eq 'foo' && unlink $tmp }) {
-	    return 1;
-	}
-
-	#- argh, key is read-only
-	#- try umounting
-	if (eval { fs::umount_part($key_part); undef $key_part; 1 }) {
-	    modules::unload('usb-storage');  #- it will not notice change on write protection otherwise :/
-
-	    $o->ask_okcancel_({ title => N("Key is not writable"), 
-				messages => formatAlaTeX(
-N("The USB key seems to have write protection enabled. Please
-unplug it, remove write protection, and then plug it again.")),
-				ok => N("Retry"),
-				cancel => N("Continue without USB key") }) or return;
-
-	    modules::load('usb-storage');
-	    sleep 2;
-	} else {
-	    #- this case happens when the user boots with a write-protected key containing
-	    #- all user and host data, /etc/X11/X which is on key busyfies it
-	    $o->ask_okcancel_({ title => N("Key is not writable"), 
-				messages => formatAlaTeX(
-N("The USB key seems to have write protection enabled, but we can not safely
-unplug it now.
-
-
-Click the button to reboot the machine, unplug it, remove write protection,
-plug the key again, and launch Mandriva Move again.")),
-				ok => N("Reboot") });
-	    reboot();
-	}
-    } else {
-	my $message = key_parts($o) ? 
-N("Your USB key does not have any valid Windows (FAT) partitions.
-We need one to continue (beside, it's more standard so that you
-will be able to move and access your files from machines
-running Windows). Please plug in an USB key containing a
-Windows partition instead.
-
-
-You may also proceed without an USB key - you'll still be
-able to use Mandriva Move as a normal live Mandriva
-Operating System.") :
-N("We did not detect any USB key on your system. If you
-plug in an USB key now, Mandriva Move will have the ability
-to transparently save the data in your home directory and
-system wide configuration, for next boot on this computer
-or another one. Note: if you plug in a key now, wait several
-seconds before detecting again.
-
-
-You may also proceed without an USB key - you'll still be
-able to use Mandriva Move as a normal live Mandriva
-Operating System.");
-	$o->ask_okcancel_({ title => N("Need a key to save your data"), 
-			    messages => formatAlaTeX($message),
-			    ok => N("Detect USB key again"),
-			    cancel => N("Continue without USB key") }) or return;
-
-    }
-    key_mount($o, 'reread');
-    check_key($o);
-}
-
-sub install2::verifyKey {
-    my $o = $::o;
-
-    log::l("automatic transparent key support is disabled"), return if $key_disabled;
-
-    if (cat_('/proc/cmdline') =~ /\bformatkey\b/) {
-	clean_partition_table_and_format_key($o);
-	key_mount($o, 'reread');
-    }
-
-    check_key($o) or return;
-
-    my $_wait = $using_existing_host_config
-                || $o->wait_message(N("Setting up USB key"), N("Please wait, setting up system configuration files on USB key..."));
-
-    if (eval { fs::umount_part($key_part); 1 }) {
-	log::l("remounting without sync option");
-	$key_part->{options} = $key_mountopts;
-	fs::mount_part($key_part);
-    }
-
-    key_installfiles('full');
-
-    setup_userconf($o);
-}
-
-sub enable_service {
-    run_program::run('/sbin/chkconfig', '--level', 5, $_[0], 'on');
-}
-
-sub install2::configMove {
-    my $o = $::o;
-
-    #- just in case
-    lomount_clp("always_i18n_$o->{locale}{lang}", '/usr');
-
-    if (!$using_existing_user_config) {
-        if (cat_('/proc/cmdline') =~ /\buser=(\w+)/) {
-            $o->{users} = [ { name => $1 } ];
-        } else {
-            require any;
-            any::ask_user_one($o, $o->{users} ||= [], $o->{security},
-                              additional_msg => N("Enter your user information, password will be used for screensaver"), noaccept => 1, needauser => 1, noicons => 1);
-        }
-        #- force uid/gid to 501 as it was used when mounting key, addUser may choose 502 when key already holds user data
-        put_in_hash($o->{users}[0], { uid => 501, gid => 501 });
-        require install_steps;
-        install_steps::addUser($o);
-    }
-
-    $::noauto and goto after_autoconf;
-
-    my $_wait = $o->wait_message(N("Auto configuration"), N("Please wait, detecting and configuring devices..."));
-
-    #- automatic printer, timezone, network configs
-    require install_steps_interactive;
-    if (cat_('/proc/mounts') !~ /nfs/) {
-        install_steps_interactive::configureNetwork($o);
-	touch('/etc/resolv.conf');
-        enable_service('network');
-    }
-    enable_service('netfs');
-    install_steps_interactive::summaryBefore($o);
-
-    modules::load_category('multimedia/sound');
-    enable_service('sound');
-
-    detect_devices::isLaptop() or enable_service('numlock');
-
-after_autoconf:
-    require timezone;
-    timezone::write($o->{timezone});
-
-    $o->{useSupermount} = 'magicdev';
-    fs::set_removable_mntpoints($o->{all_hds});    
-    fs::set_all_default_options($o->{all_hds}, %$o, lang::fs_options($o->{locale}));
-
-    require install_any;
-    install_any::write_fstab($o);
-
-    modules::write_conf();
-    require mouse;
-    mouse::write_conf($o, $o->{mouse}, 1);  #- write xfree mouse conf
-    detect_devices::install_addons('');
-
-    {
-	my $user = $o->{users}[0]{name};
-	my $confdir = "/home/$user/.kde/share/config";
-	mkdir_p($confdir);
-	output("$confdir/kdeglobals", cat_("/usr/share/config/kdeglobals"));
-	lang::configure_kdeglobals($o->{locale}, $confdir);
-
-        run_program::run('chown', '-R', "$user.$user", "/home/$user/.kde");
-    }
-
-    foreach my $step (@{$o->{orderedSteps_orig}}) {
-        next if member($step, @{$o->{orderedSteps}});
-        while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) {
-            log::l("doing remaining toBeDone for undone step $step");
-            eval { &$f() };
-            $o->ask_warn(N("Error"), [
-N("An error occurred, but I do not know how to handle it nicely.
-Continue at your own risk."), formatError($@) ]) if $@;
-        }
-    }
-}
-
-sub install_TrueFS_in_home {
-    my ($o) = @_;
-
-    my $home = fsedit::mntpoint2part('/home', $o->{fstab}) or return;
-
-    my %loopbacks = map {
-	my $part = { 
-		type => 0x83, 
-		device => "/home/.mdkmove-$_",
-	        loopback_file => "/.mdkmove-$_", loopback_device => $home,
-		mntpoint => "/home/$_/.mdkmove-truefs", size => 6 << 11,
-		toFormat => ! -e "/home/.mdkmove-$_",
-	};
-	$_ => $part;
-    } list_users();
-    $home->{loopback} = [ values %loopbacks ];
-    fsedit::recompute_loopbacks($o->{all_hds});
-    fs::formatMount_all([], $home->{loopback}, $o->{prefix});
-
-    foreach my $user (keys %loopbacks) {
-	my $dir = $loopbacks{$user}{mntpoint};
-
-	foreach (qw(.kde .openoffice)) {
-	    if (-d "/home/$user/$_" && ! -d "$dir/$_") {
-		run_program::run('mv', "/home/$user/$_", "$dir/$_");
-	    }
-	    mkdir $_ foreach "/home/$user/$_", "$dir/$_";
-
-	    run_program::run('mount', '-o', 'bind', "$dir/$_", "/home/$user/$_");
-	}
-
-	my $cache = "/tmp/.$user-cache";
-	foreach (qw(.kde/share/cache)) {
-	    mkdir_p("$cache/$_");
-	    mkdir_p("/home/$user/" . dirname($_));
-	    symlink "$cache/$_", "/home/$user/$_";
-	}
-        run_program::run('chown', '-R', "$user.$user", $dir);
-        run_program::run('chown', '-R', "$user.$user", $cache);
-
-	$ENV{XAUTHORITY} = "$dir/.Xauthority";
-	$ENV{ICEAUTHORITY} = "$dir/.ICEauthority";
-    }
-}
-
-sub errorInStep {
-    my ($o, $err) = @_;
-
-    if (!fsedit::mntpoint2part('/home', $o->{fstab})) {
-        $o->ask_warn(N("Error"), [ N("An error occurred"), formatError($err) ]);
-        return;
-    }
-
-    $o->ask_okcancel_({ title => N("Error"), 
-                        messages => formatAlaTeX(
-N("An error occurred:
-
-
-%s
-
-This may come from corrupted system configuration files
-on the USB key, in this case removing them and then
-rebooting Mandriva Move would fix the problem. To do
-so, click on the corresponding button.
-
-
-You may also want to reboot and remove the USB key, or
-examine its contents under another OS, or even have
-a look at log files in console #3 and #4 to try to
-guess what's happening.", formatError($err))),
-                            ok => N("Remove system config files"),
-                            cancel => N("Simply reboot") }) or goto reboot;
-    eval { rm_rf $key_sysconf };
-reboot:
-    reboot();
-}
-
-sub install2::initGraphical {
-    my $xdim = $::rootwidth;
-    $xdim < 800 and $xdim = 800;
-    $xdim > 1600 and $xdim = 1600;
-    run_program::run('qiv', '--root', "/image/move/BOOT-$xdim-MOVE.jpg");
-    
-    undef *install_steps_interactive::errorInStep;
-    *install_steps_interactive::errorInStep = \&errorInStep;
-}
-
-sub install2::startMove {
-    my $o = $::o;
-
-    $::WizardWindow->destroy if $::WizardWindow;
-    require ugtk2;
-    ugtk2::flush();
-
-    #- get info from existing fstab. This will not do anything if we already wrote fstab in configMove
-    fs::get_info_from_fstab($o->{all_hds}, '');
-    foreach (fsedit::get_really_all_fstab($o->{all_hds})) {
-	if (isSwap($_)) {
-	    eval { swap::swapon($_->{device}) };
-	} elsif ($_->{mntpoint} && !$_->{isMounted} && !$::noauto) {
-	    mkdir_p($_->{mntpoint});
-	    run_program::run('mount', $_->{mntpoint}) if $_->{options} !~ /noauto/;
-	}
-    }
-
-    symlinkf("/usr/share/services/ksycoca-$o->{locale}{lang}", '/etc/X11/ksycoca');
-    
-    install_TrueFS_in_home($o);
-
-    my $username = $o->{users}[0]{name} or die 'no user';
-    output('/var/run/console.lock', $username);
-    output("/var/run/console/$username", 1);
-    run_program::run('pam_console_apply');
-
-    run_program::run('hwclock', '-s', '--localtime');
-    run_program::run('chown', "$username.root", '/var/run/rebootctl');
-    substInFile { $_ = '' if m!\s/home\s! } $_ foreach '/etc/fstab', '/etc/mtab';
-
-    touch '/var/run/utmp';
-    run_program::run('runlevel_set', '5');
-    foreach (glob('/etc/rc.d/rc5.d/*')) {
-        next if member($_, qw(xfs dm devfsd syslog));
-        next if /~$/;
-        run_program::run($_, 'start');
-    }
-
-    #- allow user customisation of startup through /etc/rc.d/rc.local
-    run_program::run('/etc/rc.d/rc.local');
-
-    if ($key_part) {
-        output '/var/lib/machine_ident', machine_ident();
-        run_program::run('/usr/bin/etc-monitorer.pl', uniq map { dirname($_) } (chomp_(`find /etc -type f`),
-                                                                                grep { readlink($_) !~ m|^/| } chomp_(`find /etc -type l`)));
-        run_program::raw({ detach => 1 }, '/usr/bin/dnotify', '-MCRD', '/etc', '-r', '-e', '/usr/bin/etc-monitorer.pl', '{}') or die "dnotify not found!";
-    }
-
-    #- password in screensaver does not make sense if we keep the shell
-    if (cat_('/proc/cmdline') !~ /\bshell\b/) {
-        kill 9, cat_('/var/run/drakx_shell.pid');
-        output('/dev/tty2', "Killed\n");
-    }
-
-    if (fork()) {
-	sleep 1;
-        log::l("DrakX waves bye-bye");
-
-        open STDOUT, ">>/tmp/.kde-errors";  #- do not display startkde shit on first console
-        open STDERR, ">>/tmp/.kde-errors";
-        
-	my (undef, undef, $uid, $gid, undef, undef, undef, $home, $shell) = getpwnam($username);
-	$( = $) = "$gid $gid";
-	$< = $> = $uid;
-	$ENV{LOGNAME} = $ENV{USER} = $username;
-	$ENV{HOME} = $home;
-	$ENV{SHELL} = $shell;
-        $ENV{XDM_MANAGED} = '/var/run/rebootctl,maysd,mayfn,sched';  #- for reboot/halt availability of "logout" by kde
-        $ENV{GDMSESSION} = 1;  #- disable ~/.xsession-errors in Xsession (waste of usb key writes)
-	$ENV{LD_LIBRARY_PATH} = "$home/lib";
-        chdir $home;
-	exec 'startkde_move';
-    } else {
-	exec 'xwait', '-permanent' or c::_exit(0);
-    }
-}
-
-sub automatic_xconf {
-    my ($o) = @_;
-
-    if (!$using_existing_host_config) {
-    
-	log::l('automatic XFree configuration');
-        
-	any::devfssymlinkf($o->{mouse}, 'mouse');
-	local $o->{mouse}{device} = 'mouse';
-
-	require Xconfig::default;
-	$o->{raw_X} = Xconfig::default::configure(class_discard->new, { KEYBOARD => 'uk' }, $o->{mouse}); #- using uk instead of us for now to have less warnings
-    
-	require Xconfig::main;
-	require class_discard;
-
-	Xconfig::main::configure_everything_auto_install($o->{raw_X}, class_discard->new, {}, install_any::X_options_from_o($o));
-    }
-
-    modules::load_category('various/agpgart'); 
-
-    my $file = '/etc/X11/XF86Config';
-    $file = "$file-4" if -e "$file-4";
-    my ($Driver) = cat_($file) =~ /Section "Device".*Driver\s*"(.*?)"/s;
-    if ($Driver eq 'nvidia') {
-        modules::load('nvidia');
-	lomount_clp('nvidia', '/usr/lib/libGLcore.so.1');
-    }
-    my $lib = 'libGL.so.1';
-    symlinkf_short(-e "/usr/lib/$lib.$Driver" ? "/usr/lib/$lib.$Driver" : "/usr/X11R6/lib/$lib", "/etc/X11/$lib");
-}
-
-
-1;
diff --git a/move/pkgs.pm b/move/pkgs.pm
deleted file mode 100644
index 66f163504..000000000
--- a/move/pkgs.pm
+++ /dev/null
@@ -1,32 +0,0 @@
-#- $Id$ $
-
-package urpm_pkg;
-
-sub flag_available {
-    return 1;
-}
-
-
-package pkgs;
-use log;
-
-sub rpmDbOpen {
-    #- install_steps:343
-}
-
-sub packageByName {
-    #- install_steps:344
-    return bless {}, 'urpm_pkg';  #- we'll need to call flag_available on it
-}
-
-sub selectPackage {
-    #- install_steps:344
-}
-
-sub packagesToInstall {
-    #- install_steps:346
-    return ();
-}
-
-    
-1;
diff --git a/move/runlevel_set.c b/move/runlevel_set.c
deleted file mode 100644
index 94f7b5933..000000000
--- a/move/runlevel_set.c
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <stdlib.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <string.h>
-#include <utmp.h>
-
-int main(int argc, char **argv)
-{
-	struct utmp utmp;
-
-        if (argc <= 1) {
-                fprintf(stderr, "need an argument\n");
-                return 1;
-        }
-
-	memset(&utmp, 0, sizeof(utmp));
-	utmp.ut_type = RUN_LVL;
-        utmp.ut_pid = argv[1][0];
-
-	setutent();
-	pututline(&utmp);
-	endutent();
-
-        return 0;
-}
diff --git a/move/runstage2 b/move/runstage2
deleted file mode 100755
index 481b8579c..000000000
--- a/move/runstage2
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/usr/bin/perl
-
-#- Copyright (c) 2003 Mandrakesoft
-#-
-#- This program is free software; you can redistribute it and/or modify
-#- it under the terms of the GNU General Public License as published by
-#- the Free Software Foundation; either version 2, or (at your option)
-#- any later version.
-#-
-#- This program is distributed in the hope that it will be useful,
-#- but WITHOUT ANY WARRANTY; without even the implied warranty of
-#- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#- GNU General Public License for more details.
-#-
-#- You should have received a copy of the GNU General Public License
-#- along with this program; if not, write to the Free Software
-#- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use lib qw(../perl-install /usr/lib/stage2 /usr/lib/libDrakX);
-use install2;
-
-$::isStandalone = 0;
-install2::main(@ARGV, '--move');
-
-c::_exit(0);
diff --git a/move/todo b/move/todo
deleted file mode 100644
index 8a0f34158..000000000
--- a/move/todo
+++ /dev/null
@@ -1,39 +0,0 @@
-        startup
-
-
-        drakx
-
-what security level?
-
-resize .mdkmove-user loopback if it gets too stuffed
-
-put .mdkmove-user loopback file at the place it will be mouted so
-that user can't see the loop file on the filesystem and so can't
-shoot herself by removing it
-
-
-        kde
-
-at startup:
-   Can't get own host name. Your system is serveral misconfigured
-although "hostname" binary answers localhost.localdomain (set by
-sethostname from init of stage1)
-
-font of konsole still too large and non proportional (same
-problem as 9.2 it seems)
-
-
-        system running
-
-Click on the Menu/Doc/Howtos > Fail
-
-
-        usb key
-
-/etc/X11/X
-        is a link but vfat doesn't handle links :(
-
-
-        shutdown
-
-cd won't eject when there is an NFS mounted partition
diff --git a/move/tools/busy-files b/move/tools/busy-files
deleted file mode 100755
index 7426e785a..000000000
--- a/move/tools/busy-files
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-
-my @pids = grep { $_ ne $$ && /^(\d+)$/ } all('/proc');
-
-my @l = map {
-    grep {
-	$_ && !m!^(/proc/|/dev/|pipe:|socket:)!;
-    } map { readlink($_) } "/proc/$_/exe", glob_("/proc/$_/fd/*");
-} @pids;
-
-push @l, grep { $_ } map { (split)[5] } map { cat_("/proc/$_/maps") } @pids;
-
-if ($ARGV[0] eq '--totem') {
-    @l = grep { m!/(image(_boot)?|cdrom)/! } @l;
-    $ARGV[0] = '--server';
-}
-foreach (uniq @l) {
-    if ($ARGV[0] eq '--server') {
-	s!/image(_always|_boot|_totem)?/!/tmp/live_tree/!;
-	s!/cdrom/live_tree!/tmp/live_tree!;
-    }
-    print "$_\n";
-}
diff --git a/move/tools/busy-files-accesses b/move/tools/busy-files-accesses
deleted file mode 100644
index 241b68405..000000000
--- a/move/tools/busy-files-accesses
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-use Getopt::Long;
-
-GetOptions('no-link' => \ (my $no_link), 
-	   'no-dir' => \ (my $no_dir),
-	   'full-dirs=s', \ (my $full_dirs),
-	   'already-have=s', \ (my $already_have),
-);
-
-if ($full_dirs) {
-    my @l = map { chomp_(MDK::Common::File::cat_or_die($_)) } split(' ', $full_dirs);
-    $full_dirs = '/tmp/live_tree(' . join('|', map { quotemeta } @l) . ')/';
-}
-if ($already_have) {
-    my @l = map { chomp_(MDK::Common::File::cat_or_die($_)) } split(' ', $already_have);
-    $already_have = '(' . join('|', map { quotemeta } @l) . ')';
-}
-
-my ($file_list) = @ARGV;
-foreach my $file (cat_($file_list)) {
-    chomp $file;
-
-    $file =~ m!/tmp/live_tree! or next;
-    $already_have && $file =~ /^$already_have$/ and next;
-
-    if (-l $file ? !$no_link : -d $file ? !$no_dir : 1) {
-	my $s = $full_dirs && $file =~ /^$full_dirs/ ? "/tmp/live_tree$1" : $file;
-	push @l, $s;
-    }
-}
-
-print "$_\n" foreach sort(uniq(@l));
diff --git a/move/tools/check-fc-cache.pl b/move/tools/check-fc-cache.pl
deleted file mode 100644
index 42902835f..000000000
--- a/move/tools/check-fc-cache.pl
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/usr/bin/perl
-
-# check if files are more recent (fc-cache will slow down starting of drakx)
-
-use MDK::Common;
-
-sub stat_ {
-    my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,$atime,$mtime,$ctime,$blksize,$blocks) = stat $_[0];
-    max($mtime, $ctime);
-}
-
-my $prefix = $ARGV[0] || '/tmp/live_tree';
-
-my @conf = cat_("$prefix/etc/fonts/fonts.conf");
-
-foreach my $line (@conf) {
-    while ($line =~ m|<dir>([^<]+)</dir|g) {
-        my $dir = $1;
-        $dir =~ m|^/| or next;
-        print "dir $prefix$dir\n";
-        foreach my $d (chomp_(`find $prefix$dir -type d 2>/dev/null`)) {
-            my $ref = stat_("$d/fonts.cache-1");
-            stat_($_) > $ref and print "\t$_\n" foreach glob("$d/*");
-        }
-    }
-}
-
diff --git a/move/tools/fix-fc-cache.pl b/move/tools/fix-fc-cache.pl
deleted file mode 100755
index 720c94141..000000000
--- a/move/tools/fix-fc-cache.pl
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/usr/bin/perl
-
-# touch fontconfig cache files so that fc-cache will not slow down starting of drakx
-
-use MDK::Common;
-
-my ($prefix) = @ARGV or die "usage: $0 <prefix>\n";
-
-my @conf = cat_("$prefix/etc/fonts/fonts.conf");
-
-print "touching fontconfig cache files...\n";
-foreach my $line (@conf) {
-    while ($line =~ m|<dir>([^<]+)</dir|g) {
-        my $dir = $1;
-        $dir =~ m|^/| or next;
-        foreach my $d (chomp_(`find $prefix$dir -type d 2>/dev/null`)) {
-            touch "$d/fonts.cache-1";
-        }
-    }
-}
-
diff --git a/move/tools/kernel-nfsd.patch b/move/tools/kernel-nfsd.patch
deleted file mode 100644
index a169edb14..000000000
--- a/move/tools/kernel-nfsd.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- linux-2.6.3/fs/nfsd/vfs.c.pix	2004-02-18 04:57:29.000000000 +0100
-+++ linux-2.6.3/fs/nfsd/vfs.c	2004-04-05 15:56:35.423508058 +0200
-@@ -444,6 +444,41 @@
- 
- 
- 
-+static unsigned int i2a(char* dest,unsigned int x) {
-+  register unsigned int tmp=x;
-+  register unsigned int len=0;
-+  if (x>=100) { *dest++=tmp/100+'0'; tmp=tmp%100; ++len; }
-+  if (x>=10) { *dest++=tmp/10+'0'; tmp=tmp%10; ++len; }
-+  *dest++=tmp+'0';
-+  return len+1;
-+}
-+
-+static char *inet_ntoa_r(struct in_addr in,char* buf) {
-+  unsigned int len;
-+  unsigned char *ip=(unsigned char*)&in;
-+  len=i2a(buf,ip[0]); buf[len]='.'; ++len;
-+  len+=i2a(buf+ len,ip[1]); buf[len]='.'; ++len;
-+  len+=i2a(buf+ len,ip[2]); buf[len]='.'; ++len;
-+  len+=i2a(buf+ len,ip[3]); buf[len]=0;
-+  return buf;
-+}
-+
-+static char *inet_ntoa(struct in_addr in) {
-+  static char buf[20];
-+  return inet_ntoa_r(in,buf);
-+}
-+
-+static void printk_debug_file_access(struct svc_rqst *rqstp, struct dentry *dentry) {
-+  printk("nfsd (%s): ", inet_ntoa(rqstp->rq_addr.sin_addr));
-+  while (1) {
-+    if (dentry == dentry->d_parent) break;
-+    printk("%s/", dentry->d_name.name);
-+    dentry = dentry->d_parent;
-+  }
-+  printk("\n");
-+}
-+
-+
- /*
-  * Open an existing file or directory.
-  * The access argument indicates the type of open (read/write/lock)
-@@ -502,6 +537,8 @@
- 	} else if (access & MAY_WRITE)
- 		put_write_access(inode);
- 
-+	if (err == 0) printk_debug_file_access(rqstp, dentry);
-+
- out_nfserr:
- 	if (err)
- 		err = nfserrno(err);
-@@ -1156,6 +1193,7 @@
- 		goto out_nfserr;
- 	*lenp = err;
- 	err = 0;
-+	printk_debug_file_access(rqstp, dentry);
- out:
- 	return err;
- 
diff --git a/move/tools/nfs-accesses b/move/tools/nfs-accesses
deleted file mode 100755
index f27de0d37..000000000
--- a/move/tools/nfs-accesses
+++ /dev/null
@@ -1,67 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-use Getopt::Long;
-
-my $first_file;
-my $log_file = '/var/log/kernel/warnings';
-
-GetOptions('no-link' => \ (my $no_link), 
-	   'no-dir' => \ (my $no_dir),
-	   'full-dirs=s', \ (my $full_dirs),
-	   'ip=s' => \ (my $wanted_ip),
-	   'log-file=s' => \$log_file,
-	   'first-file=s' => \ (my $first_file),
-	   'from-time=s', => \ (my $from_time),
-	   'already-have=s', \ (my $already_have),
-	  );
-
-my @skipped_dirs = (
-		    '/usr/share/fonts', 
-		    '/lib/modules/2.4.22-21mdk',
-		    '/usr/X11R6/lib/modules/extensions',
-		    '/usr/X11R6/lib/X11/fonts',
-		    '/usr/lib/kbd/keymaps',
-		    '/usr/share/locale',
-		    '/etc/skel',
-		    );
-
-my $skipped_dirs = '/tmp/live_tree(' . join('|', map { quotemeta } @skipped_dirs) . ')/';
-if ($full_dirs) {
-    my @l = chomp_(map { MDK::Common::File::cat_or_die($_) } split(' ', $full_dirs));
-    $full_dirs = '/tmp/live_tree(' . join('|', map { quotemeta } @l) . ')/';
-}
-if ($already_have) {
-    my @l = map { chomp_(MDK::Common::File::cat_or_die($_)) } split(' ', $already_have);
-    $already_have = '(' . join('|', map { quotemeta } @l) . ')';
-}
-
-open(my $F, "tac $log_file |");
-
-my @l;
-while (<$F>) {
-    my ($time, $ip, $rfile) = /(\d+:\d+:\d+).*kernel: nfsd \((.*?)\): (.*)/ or next; 
-
-    if ($wanted_ip) {
-	$wanted_ip eq $ip or next;
-    } else {
-	warn "choosing $ip\n";
-	$wanted_ip = $ip;
-    }
-    my $file = join('/', '', reverse split('/', $rfile));
-
-    last if $file =~ m!/tmp/live_tree/move/(devices|symlinks)!;
-    last if $from_time && $time le $from_time;
-
-    $already_have && $file =~ /^$already_have$/ and next;
-
-    if ($file !~ /^$skipped_dirs/) {
-	if (-l $file ? !$no_link : -d $file ? !$no_dir : 1) {
-	    my $s = $full_dirs && $file =~ /^$full_dirs/ ? "/tmp/live_tree$1" : $file;
-	    unshift @l, $s;
-	}
-    }
-    last if $first_file && ($file eq "/tmp/live_tree$first_file" || $rfile eq $first_file);
-}
-
-print "$_\n" foreach sort(uniq(@l));
diff --git a/move/tools/scan-etc.pl b/move/tools/scan-etc.pl
deleted file mode 100755
index 66415d4de..000000000
--- a/move/tools/scan-etc.pl
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/usr/bin/perl
-
-# To be used replacing move::init handling of etc files with:
-#
-#    system("cp -a /image/etc /");
-#    symlinkf "/proc/mounts", "/etc/mtab";
-#    system("find /etc -type f > /tmp/filelist");
-#    touch '/dummy';
-#    m|^/var| && !-d $_ and mkdir_p $_ foreach chomp_(cat_('/image/move/directories-to-create'));
-#    sleep 2;
-#    goto meuh;
-
-use MDK::Common;
-
-sub stat_ {
-    my ($dev,$ino,$mode,$nlink,$uid,$gid,$rdev,$size,$atime,$mtime,$ctime,$blksize,$blocks) = stat $_[0];
-    [ $atime, max($mtime, $ctime) ];
-}
-
-our $reference = (stat_('/dummy'))->[0];
-
-our @old_filelist = chomp_(cat_("/tmp/filelist"));
-foreach (chomp_(`find /etc -type f`)) {
-    if (!member($_, @old_filelist)) {
-        push @new, $_;
-    } else {
-        $times = stat_($_);
-        $times->[0] > $reference and push @read, $_;
-        $times->[1] > $reference and push @wrote, $_;
-    }
-}
-
-print "read:\n";
-print "\t$_\n" foreach sort @read;
-
-print "wrote:\n";
-print "\t$_\n" foreach sort @wrote;
-
-print "new:\n";
-print "\t$_\n" foreach sort @new;
-
diff --git a/move/tree/X_move b/move/tree/X_move
deleted file mode 100755
index dde4bcc32..000000000
--- a/move/tree/X_move
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/bash
-
-ok=0
-lastdate1=0
-lastdate0=0
-while [ "$ok" == 0 -a ! -s /var/run/rebootctl ]; do
-    lastdate2=$lastdate1
-    lastdate1=$lastdate0
-    lastdate0=`date +%s`
-    if [ `expr $lastdate0 - $lastdate2` -lt 40 ]; then
-        echo "X server respawning too fast :(, dropping to a shell"
-        bash
-    fi
-    X $@
-    ok=$?
-done
diff --git a/move/tree/alsa_default.pl b/move/tree/alsa_default.pl
deleted file mode 100755
index 28b06cc04..000000000
--- a/move/tree/alsa_default.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl -pi
-
-# state machine:
-if (/\s*control\./) {
-    ($min, $max) = (0, 0);
-} elsif (/\s*name '/) {
-    # skip masks and blacklist sb live and the like:
-    $ignore = /\s*name '.*(3D Control|AC97 Playback Volume|Audigy Analog\/Digital Output Jack|External Amplifier Power Down|Exchange DAC|IEC958 input monitor|IEC958 Capture Monitor|IEC958 Playback Switch|mask|Mic Boost \(\+20dB\)|Mic Playback Switch|Output Jack|Surround down mix)/i;
-} elsif (!$ignore) {
-    if (/s*comment.range '(\d+) - (\d+)'/) {
-        ($min, $max) = ($1, $2);
-    } elsif (/s*value/) {
-        # enable switches:
-        s/(value\w*\S*)\s* false/\1 true/;
-        # set volume to 80%:
-        my $val = int($max*0.8);
-        s/(value\w*\S*)\s* \d+/\1 $val/;
-    }
-}
diff --git a/move/tree/halt b/move/tree/halt
deleted file mode 100755
index c8431ac03..000000000
--- a/move/tree/halt
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-echo "halt" > /var/run/rebootctl
-sudo killall -USR1 startkde_move
-sudo killall X
diff --git a/move/tree/kdedrc b/move/tree/kdedrc
deleted file mode 100644
index a58482a55..000000000
--- a/move/tree/kdedrc
+++ /dev/null
@@ -1,7 +0,0 @@
-[General]
-CheckSycoca=false
-CheckUpdates=false
-CheckHostname=false
-
-[Move]
-Rebuild=false
diff --git a/move/tree/konsolerc b/move/tree/konsolerc
deleted file mode 100644
index fb7658ad3..000000000
--- a/move/tree/konsolerc
+++ /dev/null
@@ -1,19 +0,0 @@
-[Desktop Entry]
-ActiveSession=0
-DefaultSession=shell.desktop
-Height 600=410
-Width 800=582
-bellmode=1
-defaultfont=Fixed,13,-1,5,48,0,0,0,1,0
-history=0
-historyenabled=true
-keytab=default
-
-[konsole-mainwindow#1 Toolbar style]
-Hidden=false
-IconSize=22
-IconText=IconOnly
-Index=0
-NewLine=false
-Offset=-1
-Position=Bottom
diff --git a/move/tree/mdk_behind_totem b/move/tree/mdk_behind_totem
deleted file mode 100755
index 028077821..000000000
--- a/move/tree/mdk_behind_totem
+++ /dev/null
@@ -1,106 +0,0 @@
-#!/bin/bash
-
-ok=1
-
-while [ -n "$1" ]; do
-    case "$1" in
-	--lang)
-	    lang="$2"
-            shift
-	    shift
-	;;
-	--i18n-loop)
-	    i18n_loop="$2"
-            shift
-	    shift
-	;;
-	--boot-loop)
-	    boot_loop="$2"
-            shift
-	    shift
-	;;
-	--main-loop)
-	    main_loop="$2"
-            shift
-	    shift
-	;;
-	--totem-pid)
-            totem_pid="$2"
-            shift
-	    shift
-	;;
-	--user)
-            USER="$2"
-            shift
-	    shift
-	;;
-	--restore-cmd)
-            RESTORE_CMD="$2"
-            shift
-	    shift
-	;;
-	*)
-            ok=''
-	    shift
-    esac
-done
-
-if [ -z "$totem_pid" -o -z "$ok" ]; then
-    printf "Usage: mdk_behind_totem [--boot-loop <loop>] [--main-loop <loop>] --totem-pid <pid>\n"
-    exit 1
-fi
-
-exec &> /tmp/mdk_behind_totem.log
-
-trap 'umount_cd' USR1
-
-umount_cd() {
-    echo umount_cd
-
-    umount /image_i18n_$lang
-    losetup -d /dev/$i18n_loop
-
-    umount /image_boot
-    losetup -d /dev/$boot_loop
-
-    ln -sf /image_always/lib /
-
-    if [ -L /image ]; then
-	rm -f /image
-    else
-	umount /image && \
-	    /image_always/sbin/losetup -d /dev/$main_loop || { mount_cd; kill $totem_pid; exec mdk_totem; }
-    fi
-    
-    /image_always/usr/bin/eject
-}
-
-mount_cd() {
-    echo mount_cd
-    if [ -e /cdrom/live_tree.clp ]; then
-	/image_always/sbin/losetup -r -e gz /dev/$main_loop /cdrom/live_tree.clp 
-	/image_always/bin/mount -r /dev/$main_loop /image
-    else
-	ln -sf /cdrom/live_tree /image
-    fi
-
-    losetup -r -e gz /dev/$boot_loop /cdrom/live_tree_boot.clp 
-    mount -r /dev/$boot_loop /image_boot
-
-    losetup -r -e gz /dev/$i18n_loop /cdrom/live_tree_i18n_$lang.clp
-    mount -r /dev/$i18n_loop /image_i18n_$lang
-
-    ln -sf /image/lib /
-
-    mdk_move_loop to_cdrom always always_i18n totem nvidia
-
-    # restore killed kde apps
-    su -c "$RESTORE_CMD" $USER
-}
-
-while [ -e "/proc/$totem_pid" ]; do
-    echo "waiting..."
-    /image_totem/bin/sleep 1
-done
-
-mount_cd
diff --git a/move/tree/mdk_move_boot_loop.desktop b/move/tree/mdk_move_boot_loop.desktop
deleted file mode 100644
index 5d82a7875..000000000
--- a/move/tree/mdk_move_boot_loop.desktop
+++ /dev/null
@@ -1,8 +0,0 @@
-[Desktop Entry]
-Name=Move Move Loop
-Exec=mdk_move_loop to_cdrom always always_i18n boot totem
-Type=Application
-Terminal=0
-X-KDE-autostart-after=panel
-X-KDE-autostart-after=mdkhtmlbrowser
-X-KDE-StartupNotify=false
diff --git a/move/tree/mdk_move_loop b/move/tree/mdk_move_loop
deleted file mode 100755
index b98c4a417..000000000
--- a/move/tree/mdk_move_loop
+++ /dev/null
@@ -1,56 +0,0 @@
-#!/usr/bin/perl
-
-sub name2file { 
-    my ($name) = @_;
-    "live_tree_$name.clp";
-}
-
-sub get_file2loop {
-    my %file2loop;
-    foreach (0 .. 9) {
-	my ($file) = `sudo losetup /dev/loop$_ 2>/dev/null` =~ m!\([^)]*/([^)]*)\)! or last;
-	$file2loop{$file} = "loop$_";
-    }
-    %file2loop;
-}
-
-sub to_memory {
-    my ($loop, $file) = @_;
-
-    return if -e "/tmp/$file";
-
-    if (-e "/$file") {
-	system("sudo mv /$file /tmp");
-    } else {
-	system("sudo cp /cdrom/$file /tmp");
-    }
-    system("sudo losetup /dev/$loop /tmp/$file");
-}
-
-sub to_cdrom {
-    my ($loop, $file) = @_;
-    my $f = -e "/$file" ? "/$file" : -e "/tmp/$file" ? "/tmp/$file" : return;
-    system("sudo losetup /dev/$loop /cdrom/$file");
-    system("sudo rm $f");
-}
-
-sub usage() { die "usage: mdk_move_loop <to_cdrom | to_memory> [names ...]\n" }
-
-my ($direction, @names) = @ARGV;
-my $f = $direction eq 'to_memory' && \&to_memory || $direction eq 'to_cdrom' && \&to_cdrom;
-$f && @names or usage();
-
-my %file2loop = get_file2loop(@names);
-
-foreach my $name (@names) {
-    if ($name eq 'always_i18n') {
-	/(always_i18n.*)\.clp/ and $name = $1 foreach keys %file2loop;
-    }
-    my $file = name2file($name);
-    my $loop = $file2loop{$file} or next;
-    $f->($loop, $file);
-}
-
-if ($ENV{GIVE_LOOP}) {
-    print "$_=$file2loop{$_}\n" foreach keys %file2loop;
-}
diff --git a/move/tree/mdk_totem b/move/tree/mdk_totem
deleted file mode 100755
index 0a54248ac..000000000
--- a/move/tree/mdk_totem
+++ /dev/null
@@ -1,125 +0,0 @@
-#!/usr/bin/perl
-
-use lib qw(../../perl-install /usr/lib/libDrakX);
-use common;
-use interactive;
-
-sub busy_pids_and_files() {
-    my @pids = grep { $_ ne $$ && /^(\d+)$/ } all('/proc');
-
-    map {
-
-	my @l1 = grep {
-	    $_ && !m!^(/proc/|/dev/|pipe:|socket:)!;
-	} map { readlink($_) } "/proc/$_/exe", glob_("/proc/$_/fd/*");
-
-	my @l2 = grep { $_ } map { (split)[5] } cat_("/proc/$_/maps");
-
-	if (my @l = grep { m!^/(image(_boot)?|cdrom/live_tree)/! } @l1, @l2) {
-	    my $cmdline = join(' ', split('\0', cat_("/proc/$_/cmdline")));
-	    my $exe = readlink("/proc/$_/exe");
-	    { pid => $_, cmdline => $cmdline, exe => $exe, files => [ sort(uniq(@l)) ] };
-	} else {
-	    ();
-	}
-    } @pids;
-}
-
-my @to_restart_progs = qw(kded kdesktop kicker);
-my $restart_progs = join(";", @to_restart_progs);
-my @simple_daemons = qw(kdesud kio_uiserver klaptopdaemon artsd portmap);
-sub simple_daemon {
-    my ($e) = @_;
-    my $re = join('|', @to_restart_progs, @simple_daemons);
-    $e->{cmdline} =~ m!\b($re)\b!
-}
-
-my $in = interactive->vnew;
-
-my @busy = busy_pids_and_files();
-
-my $needed_processes = join('|', map { quotemeta }
-			'init',
-			'xfs',
-			'kdeinit: Running...', 
-			'/etc/X11/X',
-			'/sbin/devfsd',
-			);
-
-if (!$ENV{DEBUG} && find { $_->{cmdline} =~ /^($needed_processes)/ } @busy) {
-    exec 'totem' if $in->ask_okcancel('', N("You can only run with no CDROM support"));
-    $in->exit(1);
-}
-
-my ($simple_daemons, $bad_busy) = partition { simple_daemon($_) } @busy;
-if (@$bad_busy) {
-    warn '*' x 80, "\n";
-    warn join("\n", "$_->{exe} ($_->{cmdline}) =>", map { "  $_" } @{$_->{files}}) . "\n" foreach @$bad_busy;
-    warn '*' x 80, "\n";
-
-    my @progs = map { 
-	my $s = $_->{cmdline};
-	$s =~ s!^/usr/bin/perl\s+([^-]\S*).*!$1!;
-	$s =~ s!/.*/!!;
-	$s =~ s!^kdeinit:\s+(\S+).*!$1!;
-	$s =~ s!\s.*!!;
-	$s;
-    } @$bad_busy;
-
-    my $choice = 'quit';
-    my @l = my %l = (
-		     kill => N("Kill those programs"), 
-		     keep => N("No CDROM support"), 
-		    );
-
-    $in->ask_from_({ 
-		     title => N("Read carefully!"),
-		     messages => N("You can not use another CDROM when the following programs are running: 
-%s", join(", ", uniq(sort @progs))) }, 
-		  [ { type => 'list', val => \$choice, list => first(list2kv(@l)), format => sub { $l{$_[0]} } } ]) or $in->exit;
-
-    if ($choice eq 'keep') {
-	exec 'totem' or $in->exit;
-    } else {
-	system('sudo', 'kill', map { $_->{pid} } @$bad_busy);
-	sleep 2;
-	system('sudo', 'kill', '-9', map { $_->{pid} } @$bad_busy);
-    }
-}
-
-kill 15, map { $_->{pid} } @$simple_daemons;
-sleep 1;
-
-@busy = busy_pids_and_files(); #- update list
-if (@busy) {
-    system($restart_progs);
-    exec 'totem' if $in->ask_okcancel('', N("You can only run with no CDROM support"));
-    $in->exit(1);
-}
-
-my %file2loop = do {
-    my $_w = $in->wait_message('', N("Copying to memory to allow removing the CDROM"));
-    `GIVE_LOOP=1 mdk_move_loop to_memory always always_i18n totem nvidia` =~ /(.*?)=(.*)/g;
-};
-
-ugtk2::gtkset_mousecursor_normal(); #- for restoring a normal in any case
-ugtk2::flush();
-
-my ($lang) = map { if_(/live_tree_i18n_(.*)\.clp/, $1) } keys %file2loop;
-my $totem_pid = $$;
-
-if (my $pid = fork()) {
-    $ENV{MDKMOVE} = $pid;
-    $ENV{G_BROKEN_FILENAMES} = 1;
-    exec 'totem';
-} else {
-    exec 'sudo', 'mdk_behind_totem',
-        '--lang', $lang,
-	'--i18n-loop', $file2loop{"live_tree_i18n_$lang.clp"},
-	'--boot-loop', $file2loop{'live_tree_boot.clp'},
-	'--boot-loop', $file2loop{'live_tree_boot.clp'},
-	'--main-loop', $file2loop{'live_tree.clp'},
-	'--totem-pid', $totem_pid,
-	'--user', $ENV{USER},
-	'--restore-cmd', $restart_progs;
-}
diff --git a/move/tree/mdk_totem.desktop b/move/tree/mdk_totem.desktop
deleted file mode 100644
index 85511c1db..000000000
--- a/move/tree/mdk_totem.desktop
+++ /dev/null
@@ -1,12 +0,0 @@
-[Desktop Entry]
-Name=Multimedia Player for CDs/DVDs
-Comment=Play movies and songs
-Exec=mdk_totem
-Icon=totem.png
-Type=Application
-Terminal=false
-
-Name[fr]=Lecteur Multim�dia pour CDs/DVDs
-Name[it]=Lettore Multimediale di CD/DVDs
-Name[de]=Multimedia-Player f�r CDs/DVDs
-Name[es]=Reproductor multimedios para CD/DVD
diff --git a/move/tree/netscape b/move/tree/netscape
deleted file mode 100755
index 922d33bc5..000000000
--- a/move/tree/netscape
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/bin/sh
-
-$BROWSER "$@"
diff --git a/move/tree/reboot b/move/tree/reboot
deleted file mode 100755
index b4b1d4ede..000000000
--- a/move/tree/reboot
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-echo "reboot" > /var/run/rebootctl
-sudo killall -USR1 startkde_move
-sudo killall X
diff --git a/move/tree/sound.initscript b/move/tree/sound.initscript
deleted file mode 100755
index 919a9b875..000000000
--- a/move/tree/sound.initscript
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/bin/sh
-# (c) Mandrakesoft, Chmouel Boudjnah <chmouel@mandrakesoft.com>
-# 	$Id$
-#
-# sound:   This shell script launch the sound on your system.
-#
-# chkconfig: 2345 18 69
-# description: This shell script launch the sound on your system.
-
-. /etc/rc.d/init.d/functions
-
-PKLVL=$(cut -f1 /proc/sys/kernel/printk)
-sysctl -n -w kernel.printk=0
-
-function start_mixer () {
-    # ALSA
-    if [ -d /proc/asound ] && [ -x /usr/sbin/alsactl ]; then
-        # is ALSA already configured ?
-	if [[ ! -r /etc/asound.state ]]; then
-	    # provide decent default sound level for alsa drivers
-	    if [ -d /proc/asound ] && [ -x /usr/sbin/alsactl ];then
-             MIXER_SETTINGS=/root/tmp/asound.state_tmp
-             alsactl -f $MIXER_SETTINGS store
-             # set some sane default volume and unmute needed channels:
-             /usr/bin/alsa_default.pl $MIXER_SETTINGS
-             action "Setting mixer settings" alsactl -f $MIXER_SETTINGS restore
-             rm -f $MIXER_SETTINGS
-		return 0
-	    fi
-	    # if we've not alsa-utils, we'll fallback on OSS initialization below
-	else
-	    # Not first boot:
-	    # Done by alsa service but only if sound service is not
-	    # enabled (hance this code path).
-	    # We'll merge in back aksa service once mdk9.2 is released.
-	    # [but we'll still handle both aumix & alsactl in order
-	    #  to manage packages removing / driver switch]
-	    action "Loading mixer settings" /usr/sbin/alsactl restore
-	    return 0
-	fi
-    fi
-    # OSS
-    if egrep -q '(sparcaudio|sound)' /proc/devices 2>/dev/null && \
-	[ "$retval" -eq 0 ] && [ -x /usr/bin/aumix ];then
-	if [ ! -r /etc/.aumixrc ];then
-	    action "Setting mixer settings" /usr/bin/aumix -v80 -w80 -c80
-	else
-	    action "Loading mixer settings" /usr/bin/aumix -f /etc/.aumixrc -L
-	fi
-    fi
-}
-
-function stop_mixer () {
-    if [ -d /proc/asound ] && [ -x /usr/sbin/alsactl ];then
-	# done by alsa service (to merge back after mdk9.2 release)
-	#action "Saving mixer settings" /usr/sbin/alsactl store
-	return 0;
-    fi
-   if egrep -q '(sparcaudio|sound)' /proc/devices 2>/dev/null && [ -x /usr/bin/aumix ];then
-	action "Saving mixer settings" /usr/bin/aumix -f /etc/.aumixrc -S
-    fi    
-}
-
-function module () {
-    opt=""
-    phrase=$1
-    alias=$2
-    [ -n "$3" ] && opt="-r"
-    module=`/sbin/modprobe -c | egrep -s "^alias( |\t)+"$alias"( |\t)+" | awk '{ print $3 }'`
-    if [ -n "$module" ] && [ "$module" != "off" ];then
-	action "$phrase ($module)" modprobe "$opt" $module
-	return $?
-    fi
-}
-
-case $1 in
-    start)
-    retval=0
-    if [ ! -d /proc/asound ];then
-	module "Loading sound module" sound || retval=1
-	/sbin/modprobe -c | awk '/^((alias)|(probe)) +sound-slot-[0-9]/ {print $2}' | ( \
-	    while read line; do
-		[[ $line = snd-card-* ]] && continue #we do it via alsa script
-		module "Loading sound module" $line || retval=1
-	    done
-	)
-	module "Loading midi module" midi
-    fi
-    start_mixer;
-    touch /var/lock/subsys/sound
-    ;;
-    stop)
-    # i should have the same semantic of alsa script than oss script,
-    # but i do not :-(, patches welcome.
-    stop_mixer;
-    rm -f /var/lock/subsys/sound
-    ;;
-    status)
-    if egrep -q '(sparcaudio|sound)' /proc/devices;then
-	gprintf "Sound loaded"
-	echo
-    fi
-    ;;
-    reload)
-    ;;
-    restart)
-    $0 stop
-    $0 start
-    ;;
-    *)
-    echo "Usage: %s\n" "$(basename $0) {start|stop|restart|status}"
-    exit 0
-esac
-
-sysctl -n -w kernel.printk=$PKLVL
-exit 0
diff --git a/move/tree/startkde_move b/move/tree/startkde_move
deleted file mode 100755
index a455ee580..000000000
--- a/move/tree/startkde_move
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-#- exit cleanly on SIGUSR1, so that our init can see a clean shutdown and automatically reboot
-reboot () {
-    exit 0
-}
-trap 'reboot' SIGUSR1
-
-while true; do
-    wait4x || exit 1
-    xwait -permanent &
-    xdim=`xdpyinfo | perl -ne 'print $1 if /dimensions:\s*(\d+)/'`
-    qiv --root /image/move/BOOT-$xdim-MOVE.jpg
-    /etc/X11/xdm/Xsession KDE   #- call it with KDE parameter to keep background image
-    sudo killall X
-    sleep 2
-done
diff --git a/move/tree/sudoers b/move/tree/sudoers
deleted file mode 100644
index 49615de98..000000000
--- a/move/tree/sudoers
+++ /dev/null
@@ -1 +0,0 @@
-ALL ALL = NOPASSWD: ALL
diff --git a/move/tree/wait4x b/move/tree/wait4x
deleted file mode 100755
index a3158f1bd..000000000
--- a/move/tree/wait4x
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/usr/bin/perl
-
-use MDK::Common;
-use lib qw(/usr/lib/libDrakX);
-use xf86misc::main;
-
-my $nb = 0;
-$| = 1;
-print "waiting for X";
-foreach (1..30) {
-    print ".";
-    sleep 1;
-    print("no X server :(\n"), exit 1 if !fuzzy_pidofs(qr/\bX_move\b/);
-    $nb++ if xf86misc::main::Xtest(':0');
-    if ($nb > 2) { #- one succeeded test is not enough :-(
-        print "found\n";
-        exit 0;
-    }
-}
-print "not found\n";
-exit 1;
diff --git a/move/xwait.c b/move/xwait.c
deleted file mode 100644
index 07a693514..000000000
--- a/move/xwait.c
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <stdlib.h>
-#include <X11/Xlib.h>
-
-int main(int argc, char **argv) {
-  int permanent = argc > 1 && !strcmp(argv[1], "-permanent");
-  Display *display = XOpenDisplay(NULL);
-
-  if (display) {
-    XEvent event;
-    
-    XSelectInput(display, DefaultRootWindow(display), SubstructureNotifyMask);
-    do {
-      XNextEvent(display, &event);
-    } while (event.type != CreateNotify || permanent);
-    XCloseDisplay(display);
-  }
-
-  exit(display == NULL);
-}
diff --git a/perl-install/.cvsignore b/perl-install/.cvsignore
deleted file mode 100644
index a75f8c73b..000000000
--- a/perl-install/.cvsignore
+++ /dev/null
@@ -1,6 +0,0 @@
-.*.sw?
-.perl_checker.cache
-debug.log
-auto
-t.pl
-*.flog
diff --git a/perl-install/.perl_checker b/perl-install/.perl_checker
deleted file mode 100644
index 72ce24fd0..000000000
--- a/perl-install/.perl_checker
+++ /dev/null
@@ -1,18 +0,0 @@
-encoding
-Libconf
-Digest::MD5
-Gtk2::Gdk::Keysyms
-Gtk2::Pango
-Gtk2::SimpleList
-IO::Socket::INET
-handle_configs
-Libconf::Templates::Generic::KeyValueSections
-printer::cups
-printer::hpoj
-printer::main
-printer::printerdrake
-scanner
-move
-utf8
-URPM::Build
-packdrake
diff --git a/perl-install/ChangeLog b/perl-install/ChangeLog
deleted file mode 100644
index 56579f25c..000000000
--- a/perl-install/ChangeLog
+++ /dev/null
@@ -1,78833 +0,0 @@
-2005/05/22  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated simplified Chinese translation.
-
-2005/05/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* Xconfig/card.pm: ensure that explanations go into /var/log/explanations
-	is standalone
-	mode (log::explanations() just calls log::l() at install time)
-	(libgl_config) only run ldconfig if needed (aka only if GL config was
-	altered)
-
-	* share/po/help-zh_CN.pot, share/po/bn.po, share/po/ms.po, share/po/sk.po,
-	share/po/gl.po, share/po/pt_BR.po, share/po/th.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/be.po, share/po/pa_IN.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/he.po, share/po/da.po,
-	share/po/ca.po, share/po/ar.po, share/po/ltg.po, share/po/nb.po,
-	share/po/ky.po, share/po/uz.po, share/po/help-ru.pot, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/sc.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/help-de.pot, share/po/mn.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/help-it.pot, share/po/tg.po,
-	share/po/bs.po, share/po/fur.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/hi.po, share/po/az.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/nl.po, share/po/help-fr.pot, share/po/tl.po, share/po/de.po,
-	share/po/help-es.pot, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/cs.po, share/po/uz@Latn.po: undo breakage
-
-	* drakxtools.spec: 10.3-0.16mdk
-
-	* interactive/newt.pm: fix canceling managment in text mode
-
-	* share/rpmsrate: us428control usx2yloader are for devices managed by
-	snd-usb-usx2y and not by snd-usb-audio
-	install synaptics related packages early in the install process
-	ensure sound utils got installed
-	install bluez-utils only if a bluetooth device is plugged
-	install joystick utils if a joystick is detected
-	install kradio qtradio with KDE and gnomeradio with GNOME if a radio
-	card is
-	present
-	do not install eroaster under KDE & GNOME since they've their own native
-	burner program
-	adiusbadsl has been replaced by eagle-usb in the pcitable in november
-	2004
-	automatically install wireless-tools if there's a wireless card
-	remove references to perl-GTK-Glade, perl-GTK-GLArea and perl-GTK-Gnome
-	since
-	they're obsoleted and not used by any core package
-	ispell packages are gone; let's replace them by aspell ones
-
-2005/05/20  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/help-zh_CN.pot, share/po/bn.po, share/po/ms.po, share/po/sk.po,
-	share/po/gl.po, share/po/pt_BR.po, share/po/th.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, install_steps_interactive.pm,
-	share/po/be.po, share/po/pa_IN.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, install_steps_newt.pm, share/po/da.po, share/po/ca.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, share/po/help-ru.pot, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/sc.po,
-	install_steps.pm, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/help-de.pot, share/po/mn.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/help-it.pot, share/po/tg.po,
-	install_steps_gtk.pm, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/hi.po,
-	share/po/az.po, bootloader.pm, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, share/po/nl.po, share/po/help-fr.pot,
-	share/po/tl.po, share/po/de.po, share/po/help-es.pot, share/po/eo.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/uz@Latn.po:
-	s/Mandrivalinux/Mandriva Linux/
-
-2005/05/20  Pixel  <pixel at mandrakesoft.com>
-
-	* share/list.xml, commands.pm, share/aliases, Makefile, share/symlinks:
-	keep binaries in their "standard" binary dir instead of moving
-	everything to /usr/bin
-	(it used to be in /usr/bin when the stage1 was not exited)
-
-	* modules.pm: keep binaries in their "standard" binary dir instead of
-	moving everything to /usr/bin
-	(it used to be in /usr/bin when the stage1 was not exited)
-	fix titi sux
-
-	* install_any.pm: propagate postInstall and postInstallNonRooted in new
-	auto_install.cfg.pl
-
-2005/05/20  willysr
-
-	* share/po/id.po: Small update
-	Updated
-
-2005/05/19  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated simplified Chinese translation
-
-2005/05/19  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/aliases, rescue/list.ia64, rescue/list, rescue/list.alpha,
-	rescue/list.ppc, rescue/list.xml, rescue/list.sparc, rescue/list.x86_64,
-	rescue/list.i386, rescue/make_rescue_img: use install-xml-file-list
-
-	* share/list.xml, share/aliases, list.sparc: 
-	  - insmod_ is now a symlink to insmod-25
-	  - handle explictly insmod, modinfo and rmmod
-
-	* rescue/restore_ms_boot: rewrite using DrakX modules
-
-	* bootloader.pm: 
-	  - list the known bootloaders without checking the availability of the
-	binary (useful when we don't have the root partition mounted, eg in
-	restore_ms_boot)
-	  - tell kdm which is the installed bootloader
-
-	* tools/simplify-drakx-modules: also remove modules ending with __END__
-
-	* Makefile: revert wrongly committed temporary change
-	  - insmod_ is now a symlink to insmod-25
-	  - handle explictly insmod, modinfo and rmmod
-
-	* tools/install-xml-file-list: many changes for use with rescue list
-
-2005/05/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_detect) simplify again
-	(adsl_detect) explain
-	(adsl_detect) detect all ADSL modems of each kind (though drakconnect
-	is able to configure only one...)
-	(adsl_detect) typo fix
-	(adsl_detect) detect more ADSL USB modems
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/pa_IN.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/da.po, share/po/ca.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sc.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/mn.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/nl.po, share/po/tl.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/uz@Latn.po: update cataglog
-
-	* standalone/service_harddrake: uninstall DVB modules if needed
-
-	* harddrake/data.pm: really list ATM devices
-	fix DVB configurator
-	list tablets and touchscreens in their own category
-	fix detecting joysticks
-	add a DVB class
-	  - simplify through modules::probe_category()
-	  - ensure modules.pm is loaded since we used it for quite some time
-	list ATM, Bluetooth, WAN, USB audio devices in their own categories
-	split the old joystick category into gameport (aka joystick controllers)
-	and
-	joystick (real joysticks devices)
-
-	* standalone/harddrake2 (simple_read_rpmsrate) add support for HW_CAT
-	keyword that enable to match
-	a category from list_modules.pm
-
-	* share/rpmsrate: install proper softwares for DVB
-	kill another module list duplication thanks to the new HW_CAT keyword.
-	use the HW_CAT to stop copying (twice!) and syncing bluetooth driver
-	list from
-	list_modules.pm
-
-	* pkgs.pm (read_rpmsrate) add support for HW_CAT keyword that enable to
-	match
-	a category from list_modules.pm
-
-	* drakxtools.spec: real 10.3-0.15mdk
-	10.3-0.15mdk
-	main subpackage lacked update-menus calls since net_applet menu entry
-	was added
-	mandrakesoft => mandriva switch
-	10.3-0.14mdk
-
-	* share/po/br.po, share/po/fr.po: update
-	update cataglog
-
-	* mouse.pm (detect) handle quite's more tablets and touchscreens at
-	install time
-
-2005/05/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* any.pm (selectCountry) only speak about other countries if needed
-
-	* interactive/newt.pm: handle 'wizcancel'
-
-2005/05/17  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/05/17  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/modem.pm: keep # and * characters in phone number (#16031)
-
-	* network/netconnect.pm: use iwpriv for WPA with rt2x00 drivers (they
-	don't plan to support wpa_supplicant)
-
-	* standalone/drakroam: really write waproamd config files
-	fix another potential security bug (#16020)
-
-2005/05/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakroam: help testing
-	really fix permissions
-	fix perms on /etc/wlandetect.conf (#16020)
-	forward fix perms on /etc/wlandetect.conf (#16020)
-
-	* drakxtools.spec: 10.3-0.13mdk
-
-2005/05/16  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot: add the "Create new theme" button back
-	allow to choose between "text only", "verbose" and "silent" bootsplash
-	modes
-
-2005/05/16  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Don't translate media types for config (#15437)
-	Don't translate media types for config (#15437)
-
-2005/05/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* mygtk2.pm (_text_insert) append option was ignored when using simplified
-	API
-
-	* drakxtools.spec: 10.3-0.12mdk
-
-2005/05/13  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: DVB support
-
-	* network/netconnect.pm: DVB support
-	hide DVB for now
-
-2005/05/13  Pixel  <pixel at mandrakesoft.com>
-
-	* c/stuff.xs.pl: add commented line to help debugging pci_probe
-
-	* share/list.xml, tools/install-xml-file-list: allow makefile like
-	variables
-
-2005/05/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getUPS) do not detect ms joystick as UPS (#15930)
-
-2005/05/12  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: reorder drakconnect first screen (to please our
-	flowered bearded boss)
-
-	* standalone/service_harddrake: fix PCMCIA controller reconfiguration
-	(#15742)
-	fix PCMCIA controller reconfiguration (#15742)
-
-2005/05/12  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: default to "Custom" when group fileshare exists (bugzilla
-	#15917)
-
-2005/05/12  Till Kamppeter  <till at mandrakesoft.com>
-
-	* install_steps.pm, share/rpmsrate: 
-	  - Gimp-Print was renamed to Gutenprint, adapted printerdrake/DrakX
-	appropriately.
-
-	* scanner.pm, standalone/printerdrake: 
-	  - Removed some remaining "Mandrake"s in printerdrake and scannerdrake.
-
-	* printer/printerdrake.pm: 
-	  - Let Gutenprint GIMP plug-in be installed by printerdrake when GIMP
-	is installed.
-
-	* printer/data.pm: 
-	  - Let Gutenprint GIMP plug-in be installed by printerdrake when GIMP
-	is installed.
-	  - Gimp-Print was renamed to Gutenprint, adapted printerdrake/DrakX
-	appropriately.
-
-2005/05/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.3-0.11mdk
-	one more fix in 10.2-24.102.2mdk
-	10.2-24.102.2mdk
-
-	* standalone/harddrake2: 
-	  - clean embedding stuff
-	  - center wait message on parent
-
-	* detect_devices.pm (getUPS) fix detecting Wingman gamepad as UPS (#15750)
-	(probeSerialDevices) really fix serial controllers detection (#15457)
-	(probeSerialDevices) fix serial controllers detection (#15457)
-	(probeSerialDevices) forward fix for  serial controllers detection
-	(#15457)
-
-	* harddrake/data.pm: forward fix SATA & hw RAID detection by detecting
-	them pior to PATA detection
-
-	* share/po/br.po: update
-
-2005/05/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po, share/po/vi.po, share/po/sv.po: updated Swedish and
-	Vietnamese file;
-	corrected references to old name in Portuguese file
-
-2005/05/11  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Drop webdav support (can be mounted as a normal
-	net filesystem these days)
-	Remove translation on "tape" media selection (#15437)
-	Rework .backupignore handling (#12352)
-
-2005/05/10  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/05/10  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/draksplash2: move rectangle2xywh(), distance(), farthest()
-	and nearest() from draksplash2 to bootsplash module, create
-	xywh2rectangle()
-
-	* ugtk2.pm: shrink real_window
-
-	* bootsplash.pm: really get default vga mode
-	move rectangle2xywh(), distance(), farthest() and nearest() from
-	draksplash2 to bootsplash module, create xywh2rectangle()
-
-	* standalone/draksplash: shrink preview window on resolution change
-	handle both silent and verbose images
-	allow to modify progress bar and console box by dragging the mouse
-
-2005/05/10  Pixel  <pixel at mandrakesoft.com>
-
-	* share/list.i386, share/list.sparc, lang.pm, share/list.ia64,
-	tools/install-xml-file-list, share/list.alpha, share/list.xml,
-	share/list, share/list.x86_64, Makefile, share/list.ppc: create
-	install-xml-file-list and use it to replace share/list and
-	share/list.ARCH with share/list.xml
-
-	* rescue/make_rescue_img: 
-	  - handle multiple data dirs
-	  - choose a free data dir if the given one already exists
-	fix (for list_modules.pm)
-
-	* Xconfig/monitor.pm (probe_using_X): add missing chomp_
-
-	* rescue/make_partimage_save_rest_all, rescue/partimage_whole_disk: 
-	  - handle multiple data dirs
-	  - choose a free data dir if the given one already exists
-
-2005/05/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm: add support for iiimf (UTUMI Hirosi <utuhiro78@yahoo.co.jp>)
-
-	* drakxtools.spec: real 10.3-0.10mdk
-	10.3-0.10mdk
-
-	* share/rpmsrate: install cpqarrayd on Compaq Smart Array controllers
-
-2005/05/09  Funda Wang <fundawang at linux.net.cn>
-
-	* share/rpmsrate, lang.pm: Drop uim-anthy for ja locale, because the great
-	improvements of scim-anthy.
-	http://archives.mandrivalinux.com/cooker-i18n/2005-04/msg00052.php
-
-2005/05/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/draksplash: remove spurious characters
-	use a separate window for image previews, use a notebook to split
-	silent/verbose/console settings
-	fix layout, update scale factors when the theme name is changed too
-	use default values for scale settings and draw a cross inside the text
-	box
-
-	* standalone/drakboot: use bootsplash::get_framebuffer_resolution
-
-	* bootsplash.pm: use default jpeg image path in config file for both
-	silent and verbose images
-	write bootsplash v3 configuration files (progress bar still missing)
-	force the exact image size when writing a theme
-	add get_framebuffer_resolution and create_path
-	fix typos
-
-2005/05/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.3-0.9mdk
-	10.2-24.102.1mdk
-
-	* standalone/draksplash: better use gtkpack__() rather than gtkadd() when
-	adding multiple widgets
-
-2005/05/08  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2005/05/07  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: another small typo fixed in slovak translation
-	updated slovak translation
-
-2005/05/06  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/Makefile.common, mdk-stage1/Makefile,
-	mdk-stage1/mar/Makefile: use installed dietlibc, not our forked cvs
-	version
-
-2005/05/06  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/Makefile, mdk-stage1/config-stage1.h,
-	mdk-stage1/newt/newt.c, mdk-stage1/newt/button.c,
-	mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/newt/entry.c,
-	mdk-stage1/dhcp.c, mdk-stage1/newt/checkbox.c, mdk-stage1/network.c,
-	mdk-stage1/directory.c, mdk-stage1/ppp/pppd/Makefile: Stage 1
-	compilation fixes for gcc 4.0 :
-	* more casts signed<->unsigned types
-	* make choose_iso_in_directory()'s return type "void"
-	* change order of .h files in network.c so strndup is included correctly
-	* newt: initialize some variables properly
-	* compile pcmcia and ppp with -Wno-deprecated-declarations, since they
-	use
-	deprecated types such as u_int32_t
-
-	* install2.pm: Add missing brace
-
-	* docs/HACKING: Document that dietlibc-devel is now required to build gi
-
-	* resize_fat/c_rewritten.xs: gcc 4.0 was choking on lvalues of
-	unpredictable type.
-
-	* mdk-stage1/Makefile: Fix path of librpc.a now that we use the system's
-	dietlibc
-
-2005/05/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/br.po: small typo error
-
-2005/05/05  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Predict NBI disk space usage and check.
-	Catch failed NBI creation. (#13902)
-	Catch failed dhcpd.conf creation (#13943)
-	Misc small bug fixes.
-
-2005/05/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/draksplash: preview theme in real time, cleanups
-
-	* bootsplash.pm: fix theme creation
-
-	* network/netconnect.pm: remove another useless step
-	ask wireless settings before boot protocol selection
-	remove useless warning in install, we never override configuration
-	(#10827)
-
-2005/05/04  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/guessmounts: don't try to mount ntfs
-
-	* bootloader.pm: lilo and grub are launched chrooted, so look for them in
-	$::prefix
-	(it worked during install since PATH contains /mnt/sbin and the like)
-
-	* rescue/partimage_whole_disk: run_program needs a proper HOME
-
-2005/05/04  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* rescue/make_rescue_img: Sometimes this tries to copy a directory
-
-2005/05/03  mareklaane
-
-	* share/po/et.po: Estonian translation updated.
-
-2005/05/03  Olivier Blin <oblin at mandrakesoft.com>
-
-	* install2.pm: remove obsolete code (most of these steps are anyway
-	skipped in upgrade mode)
-
-	* tools/patch_pcmcia_config.pl: ds has been renamed pcmcia in 2.6 kernels
-
-	* standalone/drakboot, bootsplash.pm: new theme creation functions
-
-	* standalone/draksplash: perl_checker fixes, use bool2yesno
-	remove ugly dec2hex
-
-2005/05/03  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2005/05/03  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Clarify quota message, optional delete old
-	backups (#15066).
-	Optional mail "From" address (#15293).
-	Fix automagic addition of /root to backups when not desired.
-
-2005/05/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakboot: do not garbage the console on 'wizcancel'
-
-2005/05/02  Olivier Blin <oblin at mandrakesoft.com>
-
-	* detect_devices.pm, network/ethernet.pm, network/ndiswrapper.pm: fix USB
-	devices detection for ndiswrapper
-
-2005/05/02  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm: fix displaying "Number of logical extents: %d"
-	  - allow resizing ext3 LV if not mounted
-	  - allow resizing reiserfs LV even if not mounted
-
-2005/05/02  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Update for new etherboot
-
-2005/05/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/localedrake: add comment
-
-	* standalone/drakperm, standalone/harddrake2, standalone/printerdrake,
-	standalone/logdrake, standalone/draksec, standalone/drakfloppy,
-	standalone/drakfont, standalone/drakups: embedding cleanups resulting in
-	reusing main window icon in sub dialogs
-
-	* harddrake/data.pm: fix SATA & hw RAID detection by detecting them pior
-	to PATA detection
-
-	* standalone/drakboot: fix boot style layout
-	embedding cleanups resulting in reusing main window icon in sub dialogs
-
-	* drakxtools.spec: 10.3-0.8mdk
-
-	* share/po/br.po: update
-
-2005/05/01  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/04/30  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: jorge
-	melo + jorge
-
-2005/04/29  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: Install epiphany-extensions when installing epiphany
-
-2005/04/29  huftis
-
-	* share/po/nn.po: Translated more strings.
-
-2005/04/29  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/04/29  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	indexhtml/po/da.po soft/urpmi/po/da.po
-	gi/perl-install/share/po/da.po
-
-2005/04/29  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot: typo/perl_checker fixes
-	use new bootsplash module, really split autologin and bootsplash stuff
-	kill unneeded hash
-	perl_checker fixes
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: detect tokenring and wireless
-	cards in stage1
-
-	* network/tools.pm, network/test.pm: use www.mandriva.com to test
-	connection
-
-	* standalone/drakroam: exit and warn when no wireless interface is found
-	(#15244)
-	do not write blank ESSID
-
-	* bootsplash.pm: initial bootsplash module
-
-2005/04/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.3-0.7mdk
-
-2005/04/28  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: configure pppoe connections in a ppp peer file
-
-2005/04/28  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/xfree.pm: if one prefer using "Modes" instead of "Virtual", keep
-	it as is
-
-2005/04/27  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/pa_IN.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, network/drakfirewall.pm, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/ltg.po, share/po/nb.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/sc.po,
-	share/po/br.po, share/po/sl.po, share/po/nn.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/uk.po, share/po/mn.po,
-	share/po/am.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/fur.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/ta.po,
-	share/po/nl.po, share/po/de.po, share/po/tl.po, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/uz@Latn.po:
-	Maybe the last Mandrake->Mandriva replacement.
-
-2005/04/27  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: display VPI/VCI values in decimal
-	update ATM_ADDR after with VPI/VCI values
-
-	* network/adsl.pm: reindent
-	don't write /etc/ppp/options anymore, adjust options in peer files
-
-	* share/rpmsrate: pptp-adsl is obsolete, prefer pptp-linux
-
-2005/04/27  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/partimage_whole_disk: after setting geometry H and S, we must
-	re-compute C
-	ensure we use the same geometry as used when saving
-
-	* common.pm: fix mandrake_release() when called with a prefix
-	allow using mandrake_release() with a prefix
-
-	* rescue/install_bootloader: use module bootloader.pm to handle more
-	bootloaders (esp. grub)
-
-	* bootloader.pm: 
-	  - create config_files() out of update_for_renumbered_partitions()
-	  - create main_method_choices() out of read()
-	  - create configured_main_methods() for rescue install_bootloader
-	  - rework update_for_renumbered_partitions()
-	create install_raw_grub() and install_raw_lilo()
-
-2005/04/26  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/network.c: always initialize proxy settings
-	fix typo
-
-	* mdk-stage1/adsl.c: detect IP address from DSL connection
-
-	* mdk-stage1/dns.c: fix dns resolution for DSL connections
-	enhance logging again, re-indent
-	fix typo (me sux)
-	enhance logging
-
-2005/04/26  Pixel  <pixel at mandrakesoft.com>
-
-	* mygtk2.pm: don't use ->set_uposition anymore, use ->move instead (as
-	suggested on gtk-perl mailing list)
-
-	* Makefile: remove obsolete change (C_RPM and C_DRAKX are not used in
-	c/stuff anymore)
-	start simplifying "make stage2"
-
-2005/04/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getUPS) do not detect IR devices as UPSes (#15495)
-
-	* share/po/br.po: add missing tags
-	update
-
-2005/04/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* standalone/drakxtv: corrected url
-
-	* share/po/cy.po: updated Welsh file
-
-	* share/po/it.po, share/po/ms.po, share/po/es.po: updated Italian and
-	Spanish files
-
-2005/04/25  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/guessmounts: rewrite using gi/perl-install modules
-
-	* bootloader.pm: using c::rpmvercmp is cleaner
-	fix comparing kernel version greater than 6.8
-
-2005/04/25  sharuzzaman
-
-	* share/po/ms.po: Updated Malay translation
-
-2005/04/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakfont: bump copyrigth notice
-	list myself
-	damien is no more working for us
-
-	* drakxtools.spec: add bug reference in 10.3-0.6mdk's changelog
-	10.3-0.6mdk
-
-	* share/po/br.po: update
-	sync with copyright bumping
-
-	* standalone/drakfirewall, standalone/logdrake, standalone/drakpxe,
-	standalone/finish-install.xsetup, standalone/drakvpn,
-	standalone/drakboot, standalone/drakTermServ, standalone/net_monitor,
-	standalone/drakbackup, standalone/listsupportedprinters,
-	standalone/printerdrake, standalone/fileshareset, standalone/drakedm,
-	standalone/drakroam, standalone/drakconnect, standalone/drakhelp,
-	standalone/XFdrake, standalone/drakbug, standalone/autosetupprintqueues,
-	standalone/drakupdate_fstab, standalone/draksound, standalone/drakxtv,
-	standalone/draksec, standalone/drakautoinst, standalone/drakproxy,
-	standalone/diskdrake, standalone/drakfloppy, standalone/drakgw,
-	standalone/scannerdrake: bump copyrigth notice
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/pa_IN.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sc.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/mn.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: sync with copyright bumping
-
-2005/04/24  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: handle errors in wireless packages installation,
-	simplify
-	allow to disable WPA even if no key is used
-	fix WPA key
-
-	* network/wireless.pm: handle errors in wireless packages installation,
-	simplify
-	fix WPA key
-
-2005/04/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* standalone/harddrake2, standalone/drakfont: mandrakesoft.com ->
-	mandriva.com
-
-	* share/po/ms.po, share/po/pt_BR.po, share/po/th.po, share/po/be.po,
-	share/po/pa_IN.po, share/po/ko.po, share/po/sr.po, share/po/pl.po,
-	share/po/ca.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nn.po, share/po/tr.po,
-	share/po/ga.po, share/po/am.po, share/po/tg.po, share/po/fur.po,
-	share/po/ta.po, share/po/fr.po, share/po/tl.po, share/po/uz@Latn.po:
-	various Mandrake -> Mandriva changes
-	updated po files
-
-	* standalone/draksound: s/www.linux-mandrake.com/www.mandrivalinux.com/
-
-	* share/po/zh_CN.po: more Mandrake -> Mandriva changes
-	various Mandrake -> Mandriva changes
-
-	* standalone.pm: mandrakelinux -> Mandriva Linux
-
-	* share/advertising/25.pl, standalone/logdrake, share/advertising/02.pl,
-	standalone/net_monitor, share/advertising/27.pl,
-	network/drakfirewall.pm, share/advertising/08.pl, standalone/drakedm,
-	share/advertising/30.pl, share/advertising/10.pl,
-	share/advertising/18.pl, standalone/drakconnect, standalone/drakhelp,
-	share/advertising/01.pl, standalone/drakbug, network/adsl.pm,
-	printer/printerdrake.pm, help.pm, share/advertising/29.pl,
-	share/advertising/07.pl, share/advertising/09.pl,
-	share/advertising/04.pl, share/advertising/28.pl,
-	install_interactive.pm, share/advertising/26.pl, any.pm,
-	share/advertising/06.pl, share/advertising/03.pl, standalone/net_applet,
-	share/advertising/11.pl, share/advertising/05.pl,
-	standalone/scannerdrake: s/Mandrivalinux/Mandriva Linux/
-
-	* install_messages.pm: s/www.mandrakelinux.com/www.mandrivalinux.com/
-	s/Mandrivalinux/Mandriva Linux/
-
-	* share/po/bn.po, share/po/gl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/fi.po, share/po/he.po, share/po/da.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/br.po, share/po/mt.po,
-	share/po/mn.po, share/po/lt.po, share/po/cy.po, share/po/bs.po,
-	share/po/mk.po, share/po/is.po, share/po/af.po, share/po/hi.po,
-	share/po/az.po, share/po/nl.po, share/po/de.po, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po: more Mandrake ->
-	Mandriva changes
-	various Mandrake -> Mandriva changes
-	updated po files
-
-	* share/po/sk.po, share/po/DrakX.pot, share/po/sv.po, share/po/zh_TW.po,
-	share/po/sc.po, share/po/ru.po, share/po/sl.po, share/po/uk.po,
-	share/po/wa.po, share/po/pt.po, share/po/vi.po: various Mandrake ->
-	Mandriva changes
-
-2005/04/23  willysr
-
-	* share/po/id.po: Updated
-
-2005/04/22  willysr
-
-	* share/po/id.po: Updated
-
-2005/04/21  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/04/21  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/wireless.c: set SSID after all other settings, improve text,
-	fix cast
-
-	* standalone/drakroam: fix Signal Quality parsing (and re-indent)
-
-	* mdk-stage1/dhcp.c: support DHCP over Wireless, Token Ring (great),
-	Firewire, you name it
-	borrow some comments from pump
-
-	* mdk-stage1/probing.c: use /proc/net/dev to detect network interfaces,
-	instead of testing a limited set of interface names
-
-2005/04/21  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/drvinst: use detect_devices and simplify
-
-	* Makefile: use simplify-drakx-modules
-
-	* rescue/make_rescue_img: use get-needed-drakx-modules to handle perl
-	scripts using DrakX modules
-
-	* rescue/list.i386: dmidecode is useful
-
-	* tools/simplify-drakx-modules, tools/get-needed-drakx-modules: add some
-	scripts used in perl-install/Makefile and rescue/make_rescue_img
-
-	* common.pm, install_any.pm: create common::release_file() and use it
-
-	* fs/type.pm: perl_checker fix
-	create true_local_fs_types() out of isTrueLocalFS()
-
-	* log.pm: ensure the log is flushed ASAP when using a local file
-
-2005/04/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: switch from MandrakeSoft to Mandriva
-	update
-	update
-	update
-	update string for new drakroam
-
-	* share/advertising/25.pl, install_steps_interactive.pm,
-	standalone/finish-install.xsetup, share/advertising/27.pl,
-	share/po/help-ru.pot, share/advertising/08.pl, share/advertising/10.pl,
-	share/advertising/18.pl, share/compssUsers.pl, network/adsl.pm, help.pm,
-	install_steps.pm, share/advertising/29.pl, share/advertising/07.pl,
-	share/advertising/09.pl, share/advertising/13-b.pl,
-	share/po/help-de.pot, share/advertising/04.pl, crypto.pm,
-	network/test.pm, install_interactive.pm, share/advertising/26.pl,
-	standalone/net_applet, bootloader.pm, share/advertising/05.pl,
-	share/po/help-fr.pot, share/po/help-es.pot, share/po/help-zh_CN.pot,
-	share/advertising/02.pl, network/drakfirewall.pm, install_steps_newt.pm,
-	share/advertising/30.pl, share/advertising/01.pl,
-	share/advertising/28.pl, share/po/help-it.pot, any.pm,
-	install_steps_gtk.pm, share/advertising/03.pl, share/advertising/06.pl,
-	share/advertising/13-a.pl, install_messages.pm,
-	Xconfig/resolution_and_depth.pm, share/advertising/11.pl: switch from
-	MandrakeSoft to Mandriva
-
-	* standalone/scannerdrake: switch from MandrakeSoft to Mandriva in
-	scannerdrake & printerdrake
-	switch from MandrakeSoft to Mandriva in copyright notices
-
-	* standalone/drakbackup: switch from MandrakeSoft to Mandriva in copyright
-	notices
-	improve layout
-	(filedialog_generic) switch to gtk+-2.6's new file selector
-
-	* standalone/drakboot, standalone.pm, standalone/drakedm,
-	standalone/drakhelp, standalone/logdrake, standalone/net_monitor,
-	standalone/drakconnect, standalone/drakbug: switch from MandrakeSoft to
-	Mandriva
-	switch from MandrakeSoft to Mandriva in copyright notices
-
-	* standalone/drakfirewall, standalone/drakpxe, standalone/drakvpn,
-	standalone/drakTermServ, standalone/listsupportedprinters,
-	standalone/printerdrake, standalone/fileshareset, standalone/XFdrake,
-	standalone/drakupdate_fstab, scanner.pm, standalone/drakproxy,
-	standalone/drakfloppy, mouse.pm, standalone/autosetupprintqueues,
-	standalone/draksound, standalone/drakxtv, standalone/drakautoinst,
-	standalone/diskdrake, standalone/drakgw: switch from MandrakeSoft to
-	Mandriva in copyright notices
-
-	* printer/printerdrake.pm: switch from MandrakeSoft to Mandriva
-	switch from MandrakeSoft to Mandriva in scannerdrake & printerdrake
-
-	* standalone/draksplash: switch to gtk+-2.6's new file selector
-
-	* standalone/drakperm: perl_checker cleanups
-	(row_setting_dialog) set dialog's title (usability bug)
-
-	* share/po/af.po: fix doble messages
-	switch from MandrakeSoft to Mandriva
-	update
-	sync LAN string
-	update string for new drakroam
-
-	* share/po/Makefile: remove useless merge2 rule
-
-	* share/po/ja.po, share/po/sv.po, share/po/fi.po, share/po/ca.po,
-	share/po/eu.po, share/po/id.po, share/po/mt.po, share/po/uk.po,
-	share/po/tg.po, share/po/pt.po, share/po/vi.po, share/po/tl.po,
-	share/po/gl.po, share/po/sk.po, share/po/pl.po, share/po/da.po,
-	share/po/ar.po, share/po/nb.po, share/po/it.po, share/po/ru.po,
-	share/po/nl.po: switch from MandrakeSoft to Mandriva
-	update
-	sync LAN string
-	update string for new drakroam
-
-	* share/po/fr.po, share/po/cy.po: switch from MandrakeSoft to Mandriva
-	update
-	update
-	sync LAN string
-	update string for new drakroam
-
-	* standalone/drakfont: switch from MandrakeSoft to Mandriva in copyright
-	notices
-	inline useless create_fontsel()
-
-	* network/netconnect.pm: switch from MandrakeSoft to Mandriva
-	rename "ethernet connection" as "LAN connection" like anywhere since
-	we're going to support tokenring and not just LAN (what's more, these
-	steps are whered with wireless connections which have nothing to do
-	with ethernet....)
-
-	* drakxtools.spec: 10.3-0.5mdk
-	10.3-0.4mdk
-	10.3-0.3mdk
-
-	* standalone/drakroam (ConnectNow) simplify
-	(ConnectNow) simplify
-	(UpdateStatus) improve layout
-
-	* share/po/ms.po, share/po/pt_BR.po, share/po/et.po, share/po/sr.po,
-	share/po/ltg.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/es.po, share/po/lv.po, share/po/ga.po, share/po/lt.po,
-	share/po/mk.po, share/po/fur.po, share/po/de.po, share/po/bg.po,
-	share/po/el.po, share/po/uz@Latn.po, share/po/bn.po, share/po/th.po,
-	share/po/hr.po, share/po/be.po, share/po/pa_IN.po, share/po/DrakX.pot,
-	share/po/ko.po, share/po/he.po, share/po/ky.po, share/po/zh_CN.po,
-	share/po/sq.po, share/po/sr@Latn.po, share/po/hu.po, share/po/fa.po,
-	share/po/sc.po, share/po/sl.po, share/po/nn.po, share/po/tr.po,
-	share/po/mn.po, share/po/am.po, share/po/bs.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/az.po, share/po/ta.po,
-	share/po/eo.po, share/po/cs.po: switch from MandrakeSoft to Mandriva
-	update
-	update string for new drakroam
-
-2005/04/20  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/ethernet.pm: we do want to use sysfs if ethtool fails
-
-	* mdk-stage1/Makefile, mdk-stage1/network.c, mdk-stage1/wireless.h:
-	initial wireless support (needs ESSID, and optionally a WEP key)
-
-	* network/netconnect.pm: allow to choose the wireless encryption mode
-	between "None", "Open WEP", "Restricted WEP" and "WPA Pre-Shared Key"
-	move ndiswrapper stuff in network::ndiswrapper
-	unload ndiswrapper first so that the newly installed .inf files will be
-	read
-	redetect interfaces after ndiswrapper setup (so that the ndiswrapper
-	module can be detected)
-
-	* mdk-stage1/wireless.c: fix hex key parsing
-	initial wireless support (needs ESSID, and optionally a WEP key)
-
-	* install_any.pm: do not care about the ISO volume name if it doesn't end
-	in -Disc\d+
-	handle DVD ISO images too (so that they get added installed for urpmi)
-
-	* network/wireless.pm, network/ndiswrapper.pm: allow to choose the
-	wireless encryption mode between "None", "Open WEP", "Restricted WEP"
-	and "WPA Pre-Shared Key"
-	move ndiswrapper stuff in network::ndiswrapper
-
-2005/04/20  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/make_partimage_save_rest_all: add a check
-
-2005/04/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakfont (font_choice) filter file list so that only fonts
-	are displayed
-	switch to gtk+-2.6's new file selector
-
-	* network/ndiswrapper.pm (setup_device) move comment where it's
-	appropriate
-
-	* drakxtools.spec: 10.3-0.2mdk
-
-2005/04/19  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	indexhtml/po/da.po soft/drakstats/po/da.po
-	soft/mdkonline/po/da.po gi/perl-install/share/po/da.po
-
-2005/04/19  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/ethernet.pm: fix typo
-	fix Titi sux (we do want to use sysfs if ethtool fails)
-	do not write zeroed MAC addresses in iftab, it confuses ifrename
-
-	* standalone/drakroam: fix SSID listing
-	fix SSID listing
-
-	* network/tools.pm: move wireless stuff in wireless.pm
-	do not crash if modprobe fails
-	do not show empty ndiswrapper devices list
-
-	* mouse.pm: fix simplification ..
-	simplify again (Pixel)
-	kill unused variable, simplify
-	using same mouse for alternate_install should be useless
-	remove it for xbox controller, thus making this option obsolete
-	fix me sucks
-	always set synaptics touchpad as secondary and don't list them in
-	mousedrake
-
-	* network/netconnect.pm: simplify
-	fix ancient bug (Managed should be the default wireless mode, not
-	Secondary) and simplify
-	really use given encryption key
-	network::wireless is needed for wireless configuration
-	fix typo
-	improve ndiswrapper driver configuration (allow to select driver, device
-	and many errors handling)
-	fix missing step
-	move wireless stuff in wireless.pm
-	do not show empty ndiswrapper devices list
-	unload ndiswrapper first so that the newly installed .inf files will be
-	read
-
-	* network/wireless.pm: improve ndiswrapper driver configuration (allow to
-	select driver, device and many errors handling)
-	convert_key_for_wpa_supplicant is now in network::wireless
-	move wireless stuff in wireless.pm
-
-	* install_steps_gtk.pm: using same mouse for alternate_install should be
-	useless
-	remove it for xbox controller, thus making this option obsolete
-
-	* network/network.pm: move wireless stuff in wireless.pm
-
-2005/04/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ky.po, share/po/de.po: updated Kirghiz file
-
-2005/04/19  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/partimage_whole_disk: 
-	  - ".lst" makes the file hidden, use "lst" instead
-	  - default timeout is much too short
-
-	* rescue/install_bootloader, rescue/guessmounts, rescue/drvinst: mandriva
-	switch
-
-	* Xconfig/resolution_and_depth.pm: suggest 1280x1024 instead of 1280x960
-	which causes pbs
-
-	* rescue/restore_ms_boot: update copyright
-
-	* rescue/make_partimage_save_rest_all: 
-	  - allow specifying something else than /data/box
-	  - acpi=ht by default
-
-	* diskdrake/interactive.pm: fix comment
-
-	* rescue/rescue-doc: switch to mandriva
-
-	* rescue/lsparts: remove redundancy using gi/perl-install pms
-	mandriva switch
-
-2005/04/19  sharuzzaman
-
-	* share/po/ms.po: Updated Malay translation
-
-2005/04/18  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_applet: increase network check timeout to lower the load
-	remove useless assignments
-
-	* network/netconnect.pm: clean includes
-	merge wireless steps and move advanced settings in advanced mode
-	(#15501)
-	configure wpa driver in drakconnect, wpa_supplicant init script is
-	dropped
-
-	* mdk-stage1/config-stage1.h, mdk-stage1/network.c: move defines
-
-	* network/tools.pm: replace to_bool(grep) call with any
-
-	* mouse.pm: preselect synaptics touchpad if no external mouse is present
-	use detect_devices::getSynapticsTouchpads() to detect touchpads
-	always configure an universal mouse so that USB mices can be hotplugged
-
-	* network/isdn.pm: remove useless includes
-
-	* network/shorewall.pm: fix automatic net interface detection
-	fix automatic net interface detection
-
-	* network/network.pm: configure wpa driver in drakconnect, wpa_supplicant
-	init script is dropped
-
-	* detect_devices.pm: perl_checker fix
-	space fix
-	add getSynapticsTouchpads()
-
-	* modules.pm: append evdev in modprobe.preload if a touchpad is detected
-	use better laptop detection now that dmidecode is used
-
-2005/04/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: added/modified various keyboards on the list (for next
-	update of xorg-x11)
-
-	* share/po/be.po, share/po/bn.po, share/po/ms.po, share/po/ko.po,
-	share/po/ro.po, share/po/pl.po, share/po/gl.po, share/po/he.po,
-	share/po/cy.po, share/po/af.po, share/po/et.po, share/po/eo.po,
-	share/po/hr.po, share/po/el.po, share/po/sq.po: updated Welsh file;
-	fixed some menu errors
-
-2005/04/18  rstandtke
-
-	* share/po/de.po: some fixes
-
-2005/04/16  huftis
-
-	* share/po/nn.po: Translated a few strings.
-
-2005/04/15  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/04/15  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/config-stage1.h: new domain name
-
-	* mdk-stage1/thirdparty.c: really try to list partitions on USB keys or
-	hard disks
-
-	* mdk-stage1/directory.c: enlarge directory list
-
-2005/04/15  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm, install_any.pm: Change the name of the directory
-	where the rpms are copied
-
-	* crypto.pm: Update the name of the update media added by the installer
-
-2005/04/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.3-0.1mdk
-
-	* standalone/harddrake2: perl_checker cleanups
-
-2005/04/14  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/04/14  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: allow to modify METRIC settings in the wizard
-
-2005/04/14  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: When re-using the rpmsrate and compssUsers.pl
-	from a supplementary media,
-	always retrieve them locally in /tmp, instead of choosing the main
-	install
-	method (this wasn't working for http installs)
-
-2005/04/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: fix typo in drakxservices' description
-
-	* share/po/br.po: update
-	update
-
-2005/04/14  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: sync'ed with Arabeyes CVS
-
-2005/04/13  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakconnect: use get_interface_type() to decide if the wifi
-	settings page should be displayed
-
-	* network/tools.pm: consider a device as wifi even if it isn't plugged
-	(useful in manage wizard)
-
-2005/04/13  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/raw.pm: create default_type() out of zero_MBR()
-
-	* rescue/make_partimage_save_rest_all: fix typo
-
-	* rescue/make_rescue_img, rescue/partimage_whole_disk: we now use script
-	partimage_whole_disk around partimage
-
-	* resize_fat/any.pm: remove old debug code
-
-	* log.pm: cleanup and allow openLog() to force the log file
-
-	* rescue/list.i386: add ntfsresize
-
-	* rescue/tree/etc/rc.sysinit: mount /sys
-
-2005/04/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Remount CD1 if we cancel insertion of a supplementary CD
-	Eject CD-Rom when installation is finished
-
-	* install_steps.pm: Eject CD-Rom when installation is finished
-
-2005/04/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* any.pm (autologin) make autologin choice more user friendly (#4304)
-
-	* drakxtools.spec: fix 10.2-16mdk's changelog
-
-2005/04/12  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm, detect_devices.pm, network/tools.pm,
-	standalone/drakconnect: use sysfs as fallback to detect wireless
-	interfaces (rt2x00/prism2_*)
-
-2005/04/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: put text back
-	enabled kirghiz console kbd
-
-	* share/po/br.po: removing and re-adding file
-	removing and re-adding file
-	updated po file
-
-2005/04/12  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* network/tools.pm: Fix running ifup/ifdown not in chroot
-	Need to specify the full path of ifup/ifdown when a shell isn't used to
-	run them
-
-2005/04/12  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: fix direct-to-tape backup/restore issues (#15293)
-
-2005/04/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-24mdk
-
-	* share/po/br.po: update
-
-2005/04/12  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: Remove the duplicates for a320raid
-	Workarround for clean-rpmsrate regexp pb
-
-2005/04/12  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* network/tools.pm: Fix running ifup/ifdown not in chroot
-	Need to specify the full path of ifup/ifdown when a shell isn't used to
-	run them
-
-2005/04/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-24mdk
-
-2005/04/12  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: Remove the duplicates for a320raid
-	Workarround for clean-rpmsrate regexp pb
-
-2005/04/12  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* network/tools.pm: Fix running ifup/ifdown not in chroot
-	Need to specify the full path of ifup/ifdown when a shell isn't used to
-	run them
-
-	* install_any.pm: When installing urpmi, mark cd-rom media as "static" so
-	they never get
-	updated. This is needed because those media use hdlists, but the hdlist
-	path is false for all CDs except the first one.
-
-2005/04/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-24mdk
-
-	* share/po/br.po: update
-
-2005/04/12  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: Remove the duplicates for a320raid
-	Workarround for clean-rpmsrate regexp pb
-
-2005/04/11  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: fix error reporting for ndiswrapper package
-	installation (#15373)
-	handle spaces in ndiswrapper drivers path
-
-	* standalone/drakroam: handle ESSID with spaces (#15352)
-
-2005/04/11  Pixel  <pixel at mandrakesoft.com>
-
-	* do_pkgs.pm: have a valid return value in
-	->ensure_is_installed_if_available
-
-	* bootloader.pm: fix setting perImageAppend to default entry {append}
-	(it was buggy when the default entry had an empty append, making
-	perImageAppend be failsafe on amd64 upgrade)
-
-	* pkgs.pm: the standard kernel is bigmem compliant, no need to install
-	kernel-smp for this (bugzilla #15353)
-
-2005/04/11  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* crypto.pm: Change the URL of the mirrorsfull.list for installation of
-	the updates
-
-2005/04/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-23mdk
-
-2005/04/10  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/04/08  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/04/08  Olivier Blin <oblin at mandrakesoft.com>
-
-	* harddrake/data.pm: with harddrake crash with USB/PCI DSL modems (#15034)
-
-2005/04/08  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/xfree.pm: ugly hack to fix empty ModeLine lines, XFdrake seems
-	to generate some, but where???
-	at least this allows fixing the pb by re-running XFdrake
-	1152x864 needs more modelines than the poor 1152x864@75Hz builtin xorg
-	(bugzilla #11698)
-
-2005/04/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Supplementary cd-roms weren't marked as supplementary.
-	Fix this.
-	Don't copy rpms that come from any sort of supplementary media.
-	More heuristics to figure out the CD / DVD number from its name, used
-	for the copy of media to the local HD.
-
-	* pkgs.pm: When sorting CDs, put supplementary CDs at the end
-
-2005/04/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-22mdk
-
-2005/04/08  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: new install module
-
-2005/04/08  Olivier Blin <oblin at mandrakesoft.com>
-
-	* harddrake/data.pm: with harddrake crash with USB/PCI DSL modems (#15034)
-
-	* network/netconnect.pm: add some comments for post 10.2
-
-2005/04/08  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: updates from Eskild Hustvedt:)
-
-2005/04/08  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: do the edid probe before launching X server (the way it was
-	already done for i810fb)
-
-	* any.pm: XF86Config-4 doesn't exist anymore, no need logging it
-
-	* Xconfig/xfree.pm: ugly hack to fix empty ModeLine lines, XFdrake seems
-	to generate some, but where???
-	at least this allows fixing the pb by re-running XFdrake
-	1152x864 needs more modelines than the poor 1152x864@75Hz builtin xorg
-	(bugzilla #11698)
-
-2005/04/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Don't copy rpms that come from any sort of supplementary
-	media.
-	More heuristics to figure out the CD / DVD number from its name, used
-	for the copy of media to the local HD.
-
-	* pkgs.pm: When sorting CDs, put supplementary CDs at the end
-
-2005/04/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-22mdk
-
-2005/04/08  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: new install module
-
-2005/04/08  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: add some comments for post 10.2
-
-2005/04/08  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: do the edid probe before launching X server (the way it was
-	already done for i810fb)
-
-	* any.pm: XF86Config-4 doesn't exist anymore, no need logging it
-
-2005/04/07  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/probing.h, mdk-stage1/thirdparty.c, mdk-stage1/probing.c: 
-	  - add probing_detect_devices() to keep existing pci devices in an
-	array
-	  - allow to use external third-party pcitable
-	  - modules in to_detect (thirdparty install) are now compared to
-	external third-par ty pcitable first, then to built-in pcitable
-
-	* network/netconnect.pm: always restart slmodem, even if it was already
-	installed
-
-2005/04/07  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: handle third party
-	modules from various devices
-	(at least floppy is still working :)
-
-2005/04/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-21mdk
-
-2005/04/07  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakroam: add some comment
-	hide roaming frame by default, not tested
-	don't truncate default gateway (#15247)
-
-	* standalone/net_applet: fix refresh (forget erased settings)
-
-	* mdk-stage1/thirdparty.h, mdk-stage1/thirdparty.c: export
-	THIRDPARTY_DEVICE and THIRDPARTY_DIR for stage2
-
-	* network/netconnect.pm: always restart slmodem, even if it was already
-	installed
-	cosmetics
-	create correct /dev/modem for HCF modems
-	use correct package name for HCF modems
-	fix h[cs]f fix
-
-	* network/tools.pm: net_applet: really allow users to start connection
-	without having to
-	type the root password
-	run ifup/ifdown with run_program::raw and detach, so that pppd doesn't
-	complain about invalid tty
-
-2005/04/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: sent utf-8 by default for languages that only use plain ascii,
-	and for newly added or with few users languages.
-
-2005/04/07  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: handle third party modules from various
-	devices
-	(at least floppy is still working :)
-
-	* install_steps.pm: handle third party modules from various devices
-	(at least floppy is still working :)
-	workaround weird old code (bugzilla #15300)
-
-2005/04/07  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Add a trace
-
-2005/04/07  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Sort the nic list for nbis.
-
-2005/04/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-21mdk
-
-2005/04/06  Olivier Blin <oblin at mandrakesoft.com>
-
-	* share/list, share/aliases: ship rmmod binary since insmod from
-	module-init-tools isn't combined with rmmod
-
-2005/04/06  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: monitor-edid needs /dev/zero when fallbacking on lrmi
-
-	* install2.pm: leave bootsplash when X is up (and also in newt and
-	auto_install)
-
-	* install_gtk.pm: fix position of steps window in direction rtl (bugzilla
-	#15261)
-
-2005/04/06  Olivier Blin <oblin at mandrakesoft.com>
-
-	* do_pkgs.pm: now that I know how to short-circuit it, make it work as
-	well
-	(have I already said I sux ?)
-	use short-circuit operator (/me sux, thanks Pixel)
-
-	* share/list, share/aliases: ship rmmod binary since insmod from
-	module-init-tools isn't combined with rmmod
-
-2005/04/06  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: monitor-edid needs /dev/zero when fallbacking on lrmi
-
-	* install2.pm: leave bootsplash when X is up (and also in newt and
-	auto_install)
-	when re-ordering the steps to have doPartitionDisks just after
-	selectInstallClass in case of upgrade, do it properly so that the
-	"Partitioning lamp" behaves properly (bugzilla #15040)
-
-	* install_any.pm: make the auto_inst.cfg more valid in report.bug.gz, and
-	add a warning
-
-	* install_gtk.pm: fix position of steps window in direction rtl (bugzilla
-	#15261)
-
-2005/04/06  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: LE-2005 logo
-
-2005/04/06  Pixel  <pixel at mandrakesoft.com>
-
-	* install_any.pm: make the auto_inst.cfg more valid in report.bug.gz, and
-	add a warning
-
-2005/04/06  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: LE-2005 logo
-
-2005/04/05  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: remove useless and unwanted non-ASCII character
-
-	* mouse.pm: really apply specific ALPS touchpad settings (#14510)
-
-	* modules.pm: don't load modules.cz in uml install
-
-	* standalone/net_monitor: perl_checker, indent
-	detect more devices (e.g. wireless)
-
-	* drakxtools.spec: 10.2-20mdk
-
-	* network/netconnect.pm: support more slmodems
-
-	* do_pkgs.pm: install dkms packages if found
-
-	* standalone/drakroam: do not crash if no essid is selected (partially fix
-	#15244)
-	hide unavailable features, add close button
-
-	* network/adsl.pm: please perl_checker
-	replace non-ASCII characters
-
-	* network/tools.pm: improve wifi detection
-
-2005/04/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: corrected small typo
-
-	* share/po/eu.po: updated Basque file
-
-2005/04/05  pmaryanov
-
-	* share/po/ru.po: updated
-
-2005/04/05  Pixel  <pixel at mandrakesoft.com>
-
-	* lang.pm: since we have a non-ascii font name, we have to "use utf8"
-	check(): only display "Errors:" if there is some errors
-
-	* rescue/list: revert adding Compress::Zlib
-
-	* install_steps.pm: remove accentuated char
-
-	* standalone/draksplash, share/advertising/22.pl, share/advertising/10.pl,
-	standalone/drakpxe, share/advertising/05.pl, share/advertising/21.pl,
-	share/advertising/28.pl, share/advertising/14.pl,
-	share/advertising/24.pl: 
-	  - remove non useful non-ascii characters
-	  - add "use utf8" for useful utf8 characters
-
-	* ugtk2.pm: replace the latin-charset unbreakable space with a "use utf8"
-	and the utf8 unbreakable space
-
-	* install_any.pm: media_browser is returning a file, not a file handle,
-	/me is bad :-/
-
-	* Makefile: the keyboard check is always failing, can't make pablo have it
-	right, so not checking it by default
-	(that way we can have the "make check" in gi call "make check" in
-	gi/perl-install)
-	check the presence of non ascii characters in perl files (allow utf8
-	chars if there is 'use utf8')
-
-	* printer/main.pm: replace non ascii char
-
-2005/04/05  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2005/04/05  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* crypto.pm: Add new countries to match the mirror list
-	Update mirror list
-
-2005/04/05  sharuzzaman
-
-	* share/po/ms.po: Updated Malay translation
-
-2005/04/05  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: remove useless and unwanted non-ASCII character
-
-	* network/adsl.pm: please perl_checker
-	replace non-ASCII characters
-
-2005/04/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2005/04/05  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/draksplash, share/advertising/22.pl, share/advertising/10.pl,
-	standalone/drakpxe, share/advertising/05.pl, share/advertising/21.pl,
-	share/advertising/28.pl, share/advertising/14.pl,
-	share/advertising/24.pl: 
-	  - remove non useful non-ascii characters
-	  - add "use utf8" for useful utf8 characters
-
-	* ugtk2.pm: replace the latin-charset unbreakable space with a "use utf8"
-	and the utf8 unbreakable space
-
-	* install_any.pm: media_browser is returning a file, not a file handle,
-	/me is bad :-/
-
-	* bootloader.pm: apply patch from bugzilla #15216, adding support for
-	"password=..." and "restricted" at per-entry level (thanks to jarfil)
-
-	* Makefile: the keyboard check is always failing, can't make pablo have it
-	right, so not checking it by default
-	(that way we can have the "make check" in gi call "make check" in
-	gi/perl-install)
-	check the presence of non ascii characters in perl files (allow utf8
-	chars if there is 'use utf8')
-
-	* lang.pm: check(): only display "Errors:" if there is some errors
-
-	* rescue/list: revert adding Compress::Zlib
-
-	* install_steps.pm: remove accentuated char
-
-	* printer/main.pm: replace non ascii char
-
-2005/04/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/thirdparty.h, mdk-stage1/thirdparty.c:
-	add thirdparty_load_media_modules(), try to find third party modules on
-	the install media
-
-	* mdk-stage1/probing.h, mdk-stage1/probing.c: allow to keep track of
-	orphan devices (no module available)
-
-	* drakxtools.spec: 10.2-19mdk
-
-2005/04/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm, share/keyboards.tar.bz2: included/fixed some xmodmap files
-
-	* share/po/gl.po: updated Galician
-
-2005/04/04  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Try to guess the device associated with the CD-ROM when
-	installing urpmi
-	(bug 14395)
-
-2005/04/04  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - Fixed bug #4319: Printer options cannot be set after renaming the
-	printer or changing the connection type
-	  - Fixed bug of PostScript printers with manufacturer-supplied PPD
-	cannot
-	be renamed at all
-	  - Fixed bug of print queue being deleted when renaming fails
-	  - Fixed bug of printerdrake trying to open a message window when
-	  non-interactive queue generation fails
-	  - Fixed pre-definition of $printer->{ARGS}, this bug made printerdrake
-	  crashing sometimes
-
-2005/04/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/thirdparty.h, mdk-stage1/thirdparty.c, mdk-stage1/stage1.c:
-	add thirdparty_load_media_modules(), try to find third party modules on
-	the install media
-
-	* network/netconnect.pm: disconnect internet interface before trying to
-	reconnect (or else some
-	nasty pppd and pppoa may be still alive)
-
-	* detect_devices.pm: getNet(): only up wireless devices
-
-	* mdk-stage1/probing.h, mdk-stage1/probing.c: allow to keep track of
-	orphan devices (no module available)
-
-	* network/adsl.pm: do not reload firmware on eagle-usb modems if already
-	done
-
-	* drakxtools.spec: 10.2-19mdk
-
-2005/04/04  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Try to guess the device associated with the CD-ROM when
-	installing urpmi
-	(bug 14395)
-	/me sux
-
-2005/04/04  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - Fixed bug #4319: Printer options cannot be set after renaming the
-	printer or changing the connection type
-	  - Fixed bug of PostScript printers with manufacturer-supplied PPD
-	cannot
-	be renamed at all
-	  - Fixed bug of print queue being deleted when renaming fails
-	  - Fixed bug of printerdrake trying to open a message window when
-	  non-interactive queue generation fails
-	  - Fixed pre-definition of $printer->{ARGS}, this bug made printerdrake
-	  crashing sometimes
-
-2005/04/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* detect_devices.pm: getNet(): only up wireless devices
-
-2005/04/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/fr.po: updated French and Italian files
-
-	* share/po/de.po: updated German file
-
-2005/04/04  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: /me sux
-	Don't ask for the same cd to be reinserted when copying rpms on disk
-	Introduce the new utility function getCDNumber()
-
-	* install_steps_gtk.pm: Introduce the new utility function getCDNumber()
-
-2005/04/04  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: small fix in /boot/message-text
-
-2005/04/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* pixmaps/langs/lang-qu.png, lang.pm: Enabled choice of Guarani, Quichua
-	and Berber (tifinagh) at install time;
-	changed various encoding names internally used for font choosing from
-	language based to encoding based (following iso-15924 naming)
-
-2005/04/03  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: add /usr/local and /opt to suggestions_mntpoints
-
-2005/04/03  Thomas Backlund  <tmb at mandrake.org>
-
-	* share/po/fi.po: Updated Translations, fully translated, was 93 fuzzy, 67
-	untranslated.
-
-2005/04/02  mareklaane
-
-	* share/po/et.po: Updated translation (supermount=automaatne haakimine).
-
-2005/04/02  mbukovjan
-
-	* share/po/cs.po: Updated Czech translation.
-
-2005/04/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sl.po, share/po/es.po, share/po/vi.po, share/po/wa.po: updated
-	Spanish, Slovenian, Vietnamese and Walloon files
-
-	* share/po/ja.po: updated Japanese file
-
-2005/04/02  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/04/02  willysr
-
-	* share/po/id.po: Updated
-
-2005/04/01  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2005/04/01  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: jorge
-
-2005/04/01  tsdgeos
-
-	* share/po/ca.po: small update
-
-2005/04/01  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: jorge
-
-2005/04/01  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c, mdk-stage1/disk.c: try to load ide-generic as
-	fallback when no disk or cdrom is found
-
-	* mouse.pm: configure wacom devices with synaptics touchpads too
-
-2005/04/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* Makefile, pixmaps/langs/lang-pa_IN.png, share/fonts.tar.bz2, lang.pm:
-	Added font for gurmukhi script (used by pa_IN translation);
-	enabled pa_IN, and define the font for KDE
-
-	* share/po/nb.po, share/po/id.po, share/po/sk.po, share/po/ru.po,
-	share/po/is.po, share/po/sl.po, share/po/de.po, share/po/cs.po,
-	share/po/hu.po: updated Slovenian file;
-	run msgmerge on all *.po files
-
-	* share/po/az.po, share/po/sv.po, share/po/ca.po: updated Swedish and
-	Italian files; small fixes in Azeri and Catalan files
-
-	* share/po/it.po: updated Italian file
-	updated Swedish and Italian files; small fixes in Azeri and Catalan
-	files
-
-	* share/po/cy.po: updated Welsh file
-
-2005/04/01  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: Last minute strings:)
-
-2005/04/01  pjetur
-
-	* share/po/is.po: Small fuzzy fixes
-
-2005/04/01  pmaryanov
-
-	* share/po/ru.po: s/�����/������/
-
-2005/04/01  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Sort CDs according to CD numbers, not alphabetically
-
-	* install_steps_gtk.pm: Actually remove multiple Mini-CD media for
-	deselection
-	When presenting the list of media to deselect, group by CDs even when
-	using the
-	mini ISO
-
-2005/04/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: one more item in 10.2-18mdk
-	10.2-18mdk
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/pa_IN.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sc.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/uk.po, share/po/mn.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/Makefile,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/nl.po,
-	share/po/tl.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/bg.po, share/po/cs.po, share/po/uz@Latn.po: add 3 new strings
-	from diskdrake
-
-	* share/po/fr.po: add 3 new strings from diskdrake
-	fix truncated message (#13989)
-
-	* harddrake/data.pm: fix harddrake crash
-
-2005/03/31  marco
-
-	* share/po/it.po: fix
-	fix
-
-2005/03/31  Olivier Blin <oblin at mandrakesoft.com>
-
-	* c/stuff.xs.pl: add enable_net_device
-
-	* network/netconnect.pm: add some comment for post 10.2
-	do not use ifplugd for wireless cards (and don't allow users to enable
-	it for wireless cards in drakconnect)
-
-	* detect_devices.pm: enable ethernet interfaces during detection (fix
-	Ralink wireless detection)
-
-2005/03/31  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tr.po: small changes
-
-	* share/po/az.po: some Azeri changes from Max Payne
-	small changes
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/cy.po: updated Welsh file
-
-2005/03/31  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: Updates from Eskild Hustvedt:)
-
-2005/03/31  pmaryanov
-
-	* share/po/ru.po: fixed drakperm:24 and drakperm:23
-
-2005/03/31  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm: useSupermount is no more a boolean, don't let
-	the "More" dialog box set it to 1 when it is magicdev
-
-	* standalone/drakauth, authentication.pm: don't display description for
-	non proposed authentication kinds
-
-	* lang.pm: better locale-policy.fdi (bugzilla #15025)
-
-2005/03/31  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: do not try to install packages that are not
-	availlable (#15106)
-	do no try to install too generic hw packages (#15101)
-
-	* drakxtools.spec: 10.2-17mdk
-
-	* detect_devices.pm: do not detect joystics as UPSes
-
-2005/03/31  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: Add gpdf and eog to GNOME packages
-
-2005/03/31  mareklaane
-
-	* share/po/et.po: Updated translation.
-
-2005/03/31  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: add some comment for post 10.2
-	do not use ifplugd for wireless cards (and don't allow users to enable
-	it for wireless cards in drakconnect)
-
-2005/03/31  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/az.po, share/po/tr.po: small changes
-
-	* share/po/vi.po: updated Vietnamese file
-
-	* share/po/es.po: updated Spanish file
-
-2005/03/31  pmaryanov
-
-	* share/po/ru.po: fixed drakperm:24 and drakperm:23
-	updated drakperm
-
-2005/03/31  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm: useSupermount is no more a boolean, don't let
-	the "More" dialog box set it to 1 when it is magicdev
-
-	* standalone/drakauth, authentication.pm: don't display description for
-	non proposed authentication kinds
-
-	* network/drakfirewall.pm: fix typo (bugzilla #15116)
-
-	* lang.pm: better locale-policy.fdi (bugzilla #15025)
-
-	* rescue/list: disambiguate (esp for Config.pm which now has
-	Net/Config.pm)
-
-	* any.pm: the wmaker line didn't ask the window manager to logout, but to
-	rerun itself, so removing it (bugzilla #15087)
-
-2005/03/31  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/03/31  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: do not detect USB joystics as UPSes (#15102)
-
-	* share/po/az.po: update (Ugur Eminli <system.virus@gmail.com>)
-
-	* standalone/harddrake2: do not try to install packages that are not
-	availlable (#15106)
-	do no try to install too generic hw packages (#15101)
-
-2005/03/30  mbukovjan
-
-	* share/po/cs.po: Updated Czech translation.
-
-2005/03/30  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: fix speedtouch microcode url (#15095)
-
-	* network/adsl.pm: eagle-usb: try to use the country specific CMV
-	fctStartAdsl is moved in /sbin too
-
-2005/03/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/es.po, share/po/ja.po, share/po/pl.po, share/po/fr.po,
-	share/po/wa.po: updated Japanese, Polish, Spanish, French and Walloon
-	files
-
-2005/03/30  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: updates:)
-
-2005/03/30  pmaryanov
-
-	* share/po/ru.po: updated drakbackup
-	multiply fixes translation of 'Service'
-	s/search/Search
-	fixed '...mail alert...'
-
-2005/03/30  rstandtke
-
-	* share/po/de.po: some fixes
-	some additions
-
-2005/03/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/pa_IN.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sc.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/nl.po,
-	share/po/tl.po, share/po/de.po, share/po/cs.po, share/po/uz@Latn.po: 
-	  - merge in new strings from drakroam
-	  - auto translate "RAID controllers" for harddrake
-	  - manual updates for af, br & fr
-
-	* share/po/Makefile: fix makefile
-
-	* drakxtools.spec: update 10.2-16mdk's changelog
-	update 10.2-16mdk's changelog
-	10.2-16mdk
-
-	* share/po/sr.po, share/po/ro.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/tr.po, share/po/mn.po, share/po/az.po, share/po/ta.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po: manual updates
-	  - merge in new strings from drakroam
-	  - auto translate "RAID controllers" for harddrake
-	  - manual updates for af, br & fr
-
-	* harddrake/data.pm: megaraid controllers are listed as RAID ones now
-	3ware controllers are listed as RAID ones now
-	ensure we detect all known sound cards
-	do not list hardware controllers in unknown section
-	ensure we detect all known SATA controllers
-
-2005/03/30  willysr
-
-	* share/po/id.po: Updated
-
-2005/03/29  mareklaane
-
-	* share/po/et.po: Updated translation.
-
-2005/03/29  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: fix NET_INTERFACE for sagem modems not using
-	pppoa
-
-	* detect_devices.pm: detect more Bewan devices
-
-	* standalone/net_applet: really load network configuration at start
-
-2005/03/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/es.po, share/po/fr.po: updated French and Spanish files
-
-	* Makefile: removed pa_IN.po and ta.po from install due to font problems
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/po/pa_IN.po: Added Punjabi file
-
-	* share/po/it.po: updated Italian file
-
-2005/03/29  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: Updates from Eskild Hustvedt
-
-2005/03/29  pmaryanov
-
-	* share/po/ru.po: fixed Uninstall font
-
-2005/03/29  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: if i686-up-4GB is not there we don't have pae, fallback on
-	i586-up-1GB
-
-	* lang.pm: revert to standard size (as told on bugzilla #14988 to revert
-	#13809)
-
-	* lvm.pm: ensure we have a {lv_name} (esp. for auto_installs)
-
-	* standalone/service_harddrake, modules.pm, standalone/harddrake2,
-	harddrake/data.pm: 
-	  - disable imm/ppa probe during install since it causes some rubbish to
-	be printed (bugzilla #12560)
-	  - add an option in harddrake to probe imm/ppa
-
-2005/03/29  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Reinout van Schouwen <reinout@cs.vu.nl>:
-	Updated Dutch translation-
-
-2005/03/29  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/detect.pm: 
-	  - Let IOCTL detection of an USB printer not get accepted if there is
-	no
-	relevant item at all in the ID string, to avoid mis-detection of some
-	USB
-	  keyboards as printers.
-
-2005/03/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: move drakroam from drakxtools-newt into drakxtools
-	since it requires gtk+
-	fix tools' crash when drakconf is not installing (#13392)
-	10.2-15mdk
-
-	* docs/HACKING: update package list regarding gtk+ bindings
-
-	* standalone/drakroam (UpdateStatus) fix layout
-	translate columns' headers
-
-	* any.pm (selectLanguage) remove unused variable
-	(selectLanguage) let "unicode" checkbox be an advanced item at both
-	install
-	time and in standalone mode
-
-	* detect_devices.pm (floppies) do not use dmidecode for detecting floppies
-	since it's not
-	reliable (#15029)
-
-	* harddrake/data.pm: fix optical mice detection (#15082)
-
-2005/03/28  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm, network/adsl.pm: eaglectrl is now in /sbin
-	(#15033)
-
-2005/03/28  pmaryanov
-
-	* share/po/ru.po: fixed PPPoE, PPPoA,...
-
-2005/03/27  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: transl. drakroam messages
-
-2005/03/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/br.po, share/po/pl.po, share/po/ar.po,
-	share/po/he.po: removed "10.1"
-
-2005/03/27  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* rescue/list: Add some more files to the rescue until packdrake works
-	correctly without Compress::Zlib.
-
-2005/03/27  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/03/27  willysr
-
-	* share/po/id.po: Updated
-
-2005/03/26  Funda Wang <fundawang at linux.net.cn>
-
-	* share/advertising/09.pl: Oops, Sorry for the critical typo
-	s/Mandrakelinux 10.1/Mandrakelinux. For advertising.
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sc.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: Oops! Sorry for the critial typo :(
-	s/Mandrakelinux 10.1/Mandrakelinux/. For advertising.
-
-2005/03/26  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/03/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/sc.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* share/po/es.po, share/po/pt.po: updated Spanish file
-	updated pot file
-
-2005/03/25  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* rescue/list.x86_64: speculatively add 32-bit loader in case user wants
-	to use 3rdparty 32-bit
-	binaries depending on it.
-
-	* rescue/tree/usr/share/symlinks: I hate you pixel. ;-) You were not lib64
-	aware of those modern arches. ;-))
-
-	* rescue/make_rescue_img: take care of lib64 platforms, also add msboot
-	restorer to x86_64 tree
-
-	* share/rpmsrate: kdm was the new default
-
-2005/03/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sc.po: Added Sardinian file
-
-	* share/po/pt_BR.po: updated Brazilian file
-
-	* share/po/sl.po, share/po/id.po: updated Slovenian file
-
-2005/03/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-14mdk
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/sc.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/mn.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/Makefile, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/vi.po, share/po/fr.po, share/po/ta.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/el.po,
-	share/po/bg.po, share/po/cs.po, share/po/uz@Latn.po: 
-	  - add new strings from drakroam
-	  - merge in kde's translations
-
-	* share/po/be.po: fix bogus translations introduced on 6-Aug-2004
-	  - add new strings from drakroam
-	  - merge in kde's translations
-
-	* modules/interactive.pm (load_category__prompt_for_more) enable one to
-	load ide drivers if needed
-
-2005/03/25  willysr
-
-	* share/po/id.po: Fix Typo
-	Fix Typo and Minnor Update
-	Updated
-
-2005/03/24  Olivier Blin <oblin at mandrakesoft.com>
-
-	* install_any.pm: nasty warly uses different volume IDs for mini CDs
-
-	* standalone/drakroam: do not crash in Help and About buttons
-
-2005/03/24  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Always write an MD5SUM file
-
-2005/03/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	update
-
-	* standalone/drakroam: tag strings as being translatable
-
-	* share/po/pt_BR.po: 
-	  - update from Cristiano Otto Von Trompczynski <cris@mandrakesoft.com>
-	  - fix errors in cataglog
-
-2005/03/24  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_applet: force refresh if asked by user from the menu
-	reload configuration on SIGHUP
-	ask for root password if needed when setting a new profile
-
-	* network/network.pm: write ATM_ADDR field
-
-	* network/netconnect.pm: ATMARP support, useful for modems using pppoatm
-	(e.g. SpeedTouch) and
-	ISP using RFC 1483 Routed VC MUX (e.g. Free Degroupe)
-
-	* network/adsl.pm: use new --nocall option of speedtouch-start
-
-2005/03/24  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/drakvpn, network/shorewall.pm, standalone/drakgw: 
-	  - network::shorewall::default_interfaces_silent() does not need any
-	parameter
-	  - network::shorewall::read() is simpler with a $o_in
-	  - network::drakfirewall::default_from_pkgs() is non interactive,
-	better give it a do_pkgs
-	  - cleanup as little as possible
-
-	* security/level.pm: really default security level 3
-
-	* raid.pm: calling inactivate_and_dirty() on a new structure is bad, we
-	loose the {isFormatted} flag
-	(no big deal though, it happened because raid::new() was creating a new
-	raid with an already active md name)
-	ensure we use/propose a free md when creating a new one
-	after "mdadm --assemble" there can be some mds in inactivate state
-	busying devices, stopping them
-
-	* network/drakfirewall.pm: log what we are doing
-	return the user choices
-	  - there is no reason to have string ref for ports
-	  - replace main_auto_install() with default_ports()
-	network::drakfirewall::set_ports() doesn't *need* a $in anymore, and it
-	doesn't die when no network card
-	  - network::shorewall::default_interfaces_silent() does not need any
-	parameter
-	  - network::shorewall::read() is simpler with a $o_in
-	  - network::drakfirewall::default_from_pkgs() is non interactive,
-	better give it a do_pkgs
-	  - cleanup as little as possible
-
-	* install_steps_interactive.pm: 
-	  - configure a firewall by default in secure level >= 3
-	  - allow auto_install parameter {firewall_ports}
-	  - network::shorewall::default_interfaces_silent() does not need any
-	parameter
-	  - network::shorewall::read() is simpler with a $o_in
-	  - network::drakfirewall::default_from_pkgs() is non interactive,
-	better give it a do_pkgs
-	  - cleanup as little as possible
-
-	* install_steps.pm: really default security level 3
-	  - configure a firewall by default in secure level >= 3
-	  - allow auto_install parameter {firewall_ports}
-
-	* diskdrake/interactive.pm: calling inactivate_and_dirty() on a new
-	structure is bad, we loose the {isFormatted} flag
-	(no big deal though, it happened because raid::new() was creating a new
-	raid with an already active md name)
-	use raid::free_mds() and don't sort (we provide a better numerically
-	sorted list)
-
-2005/03/24  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* tools/Makefile: Install modules required by packdrake and gendistrib in
-	MISC_DEST
-
-2005/03/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (Gtk2::Banner::new) make banner be RTL aware (aka follow
-	language direction
-	and display itself mirrored for RTL languages) (#11910)
-	(Gtk2::Banner::new) ensure icon is centered vertically
-
-	* drakxtools.spec: 10.2-13mdk
-
-2005/03/24  willysr
-
-	* share/po/id.po: Updated
-
-2005/03/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: warn that the mount can fail if the partition hasn't
-	been cleanly unmounted
-
-	* install_any.pm: temporarily fallback on /mnt/hd if the hard disk mount
-	point can't be found
-
-2005/03/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: warn that the mount can fail if the partition hasn't
-	been cleanly unmounted
-
-	* install_any.pm: temporarily fallback on /mnt/hd if the hard disk mount
-	point can't be found
-
-2005/03/23  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Fix ejection of cdrom when asking for the supplementary
-	CD. (bug 14902)
-
-2005/03/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: warn that the mount can fail if the partition hasn't
-	been cleanly unmounted
-
-	* install_any.pm: temporarily fallback on /mnt/hd if the hard disk mount
-	point can't be found
-
-2005/03/23  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Fix ejection of cdrom when asking for the supplementary
-	CD. (bug 14902)
-
-2005/03/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: warn that the mount can fail if the partition hasn't
-	been cleanly unmounted
-
-	* install_any.pm: temporarily fallback on /mnt/hd if the hard disk mount
-	point can't be found
-
-2005/03/23  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Fix ejection of cdrom when asking for the supplementary
-	CD. (bug 14902)
-
-2005/03/23  fisher
-
-	* share/po/uk.po: uk tr-tion update
-
-2005/03/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: warn that the mount can fail if the partition hasn't
-	been cleanly unmounted
-
-	* install_any.pm: temporarily fallback on /mnt/hd if the hard disk mount
-	point can't be found
-
-	* network/adsl.pm: make Bewan PCI modems work (drop MTU config entries)
-
-2005/03/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: changed tifinagh kbd to "tifinagh(phonetic)", to avoid
-	conflicts
-	with future moroccan standard layout (as will be used in schools etc)
-	which is a bit different
-
-2005/03/23  pmaryanov
-
-	* share/po/ru.po: fixed 'Load/Save selection' and 'No details'
-	translated 'Smart Card'
-	fixed 'Allow all users'
-
-2005/03/23  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/monitor.pm: probe_using_X on neomagic can return rubbish, so
-	prefer probe_DMI() (even if dmi probe is quite fuzzy...)
-
-2005/03/23  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm: Fix detection of available space when copying rpms
-	on disk (bug 14790)
-
-	* install_any.pm: Fix ejection of cdrom when asking for the supplementary
-	CD. (bug 14902)
-
-2005/03/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	typo fix
-
-	* Makefile.drakxtools, Makefile: package rpmsrate
-
-	* drakxtools.spec: 10.2-12mdk
-
-2005/03/23  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: Add ufraw-gimp with gimp and ufraw in photo (for
-	handling raw images from digital camera)
-
-2005/03/23  willysr
-
-	* share/po/id.po: Fix Typo
-	Updated
-
-2005/03/23  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/monitor.pm: probe_using_X on neomagic can return rubbish, so
-	prefer probe_DMI() (even if dmi probe is quite fuzzy...)
-
-2005/03/22  Olivier Blin <oblin at mandrakesoft.com>
-
-	* share/rpmsrate: install atmel firmwares for hardware using at76* modules
-	install prism54-firmware for prism54 devices only
-	kernel 2.4 isn't needed anymore for this hardware
-	install xine-esd on Gnome desktops so that totem works when esd is
-	running
-
-	* mdk-stage1/disk.c: dirname may modify the string, so copy it first
-
-2005/03/22  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: perl_checker fix
-	choose the default background best matching the resolution
-
-	* standalone/keyboarddrake: we require_root_capability, so do it ASAP
-	(bugzilla #13619)
-	clean-up
-	put the question inside the interactive code
-
-	* Xconfig/main.pm: try a little harder to know if we must write the config
-	file.
-	this is still not enough though
-	put X conf read in Xconfig::main
-
-	* diskdrake/interactive.pm, lvm.pm: ensure {lv_name} is set when calling
-	check_mntpoint() from Create() (via check()) (bugzilla #14253)
-
-	* any.pm: be more explicit
-	when calling adduser, don't forget {realname} or {home} if we have them
-	(bugzilla #13805)
-	no acpi means acpi=on, not the contrary (bugzilla #13935)
-
-	* install_steps.pm: acpi=on is the default
-
-	* install_steps_interactive.pm: handle the return value of
-	any::setupBootloader() (bugzilla #13641)
-
-	* standalone/XFdrake: put X conf read in Xconfig::main
-
-	* standalone/drakauth, authentication.pm: SmartCard authentication needs a
-	(bloody) proprietary package,
-	only propose it when the package is available
-
-	* Xconfig/xfree.pm: try a little harder to know if we must write the
-	config file.
-	this is still not enough though
-
-2005/03/22  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* install_steps_gtk.pm, share/list.i386, mouse.pm: XBox - get xpad to work
-	in install (added xset)
-
-	* harddrake/sound.pm: XBox - add options "xbox=1" for sound driver (thx
-	Thierry)
-
-2005/03/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: help perl_checker
-	install packages needed for hw support
-
-	* drakxtools.spec: 10.2-11mdk
-
-	* interactive.pm: perl_checker cleanup
-
-2005/03/22  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: fix kdegraphics-common duplicate problem
-
-2005/03/22  willysr
-
-	* share/po/id.po: Fix Typo
-	Updated
-	Fix Typo
-	Updated
-
-2005/03/21  Funda Wang <fundawang at linux.net.cn>
-
-	* keyboard.pm: fixed wrongly spelled us_intl for lb locale.
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, install_messages.pm, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: s/102errata/errata/. There will not
-	be an 10.2, and errara.php3
-	is allways pointed to latest errata :/
-
-2005/03/21  marco
-
-	* share/po/it.po: Successivo -> Next
-
-2005/03/21  Olivier Blin <oblin at mandrakesoft.com>
-
-	* share/rpmsrate: install kwifimanager on wireless-aware kde desktops
-
-	* mdk-stage1/network.c: rephrase message (#14813)
-
-	* mouse.pm: help perl_checker
-	use specific Synaptics settings for ALPS devices (#14512)
-
-	* detect_devices.pm: handle wireless hardware type
-	is_lan_interface: do not list wifi%d interfaces as LAN devices (#14523)
-
-	* Xconfig/xfree.pm: remove useless function to improve readability and
-	please Titi
-	use specific Synaptics settings for ALPS devices (#14512)
-	use new recommended settings for synaptics-0.14.0
-	factorize and minimal comments
-
-2005/03/21  Pixel  <pixel at mandrakesoft.com>
-
-	* do_pkgs.pm: add ->is_available
-
-	* ugtk2.pm: don't use show_all, it unhides hidden summary (bugzilla
-	#13941)
-
-	* rescue/make_partimage_save_rest_all: addmd5 to the generated iso
-	factorize
-
-	* bootloader.pm: enhance yaboot macos entry handling (mostly written by
-	cjw) (bugzilla #14642)
-
-2005/03/21  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Don't copy RPMs from supplementary media, except
-	supplementary CDs
-	Factorize code on opening CD tray.
-	This, and the previous change, fixed bug #14850.
-	Force opening of cdrom tray when asking for a supplementary CD.
-	Allow to eject non-mounted cdroms
-
-2005/03/21  rstandtke
-
-	* share/po/de.po: some additions
-
-2005/03/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getUPS) enforce "hidups" as driver for BackPro UPSes
-
-	* drakxtools.spec: 10.2-10mdk
-
-	* standalone/drakups (add_device_wizard) set extra parameters if present
-
-2005/03/21  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: install kdegraphics-common to support camera
-
-2005/03/21  willysr
-
-	* share/po/id.po: Fix typo
-	Updated
-
-2005/03/21  Olivier Blin <oblin at mandrakesoft.com>
-
-	* drakxtools.spec: force net_applet start from menu (#14858)
-
-	* mdk-stage1/network.c: rephrase message (#14813)
-
-	* standalone/net_applet: don't modify autostart config file value if
-	started with --force
-
-2005/03/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po: updated Bengali file
-
-	* share/po/sl.po: updated Slovenian file
-
-2005/03/21  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/xfree.pm: ensure strange return value from gtf(1) doesn't cause
-	havoc
-
-	* rescue/make_partimage_save_rest_all: addmd5 to the generated iso
-	factorize
-
-	* detect_devices.pm, pkgs.pm: handle new kernel flavour for i686 but non
-	pae
-
-2005/03/21  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Allow to eject non-mounted cdroms
-
-2005/03/21  willysr
-
-	* share/po/id.po: Updated
-	Fix typo
-	Updated
-
-2005/03/20  willysr
-
-	* share/po/id.po: Fix Typo
-	Fix Typo
-	Updated
-
-2005/03/19  Pixel  <pixel at mandrakesoft.com>
-
-	* drakxtools.spec: we need latest ldetect-lst (bugzilla #14785)
-
-2005/03/19  shivahuang
-
-	* share/po/zh_TW.po: updated po files
-
-2005/03/19  willysr
-
-	* share/po/id.po: minnor update
-	Updated
-	minnor update
-	Updated
-	Updated
-
-2005/03/18  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: do "doPartitionDisks" and "formatPartitions" ASAP in
-	upgrade so that miscellaneous is runned when /mnt is mounted (bugzilla
-	#8678)
-
-2005/03/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-9mdk
-
-	* network/netconnect.pm: disable network hotplug for via-velocity driver
-	(#14763)
-
-2005/03/18  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, install_messages.pm, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: s/101errata/102errata for the next
-	release. We often forget this.
-
-2005/03/18  Olivier Blin <oblin at mandrakesoft.com>
-
-	* harddrake/data.pm: adapt to new adsl_detect prototype
-
-	* standalone/drakroam: perl_checker/include fixes
-	don't be verbose
-
-	* standalone/drakconnect: really detect wireless devices in manage
-	interface
-
-	* rescue/tree/etc/issue: tell how to go back to the rescue menu
-
-	* share/po/fr.po: fix drakbackup message
-	fix bad translations
-
-	* standalone/logdrake: perl_checker fixes
-	fix save dialog
-
-	* network/ethernet.pm: remove other mac address occurrences in iftab
-
-2005/03/18  Pixel  <pixel at mandrakesoft.com>
-
-	* lvm.pm: rootDevice must be properly set, esp. for newt diskdrake
-	(bugzilla #14254)
-
-	* standalone/localedrake: always warn the user to logout, even if we can't
-	help (bugzilla #14403)
-
-	* diskdrake/interactive.pm: remove the lvm if lvm::vg_destroy() succeeds
-	(bugzilla #14249)
-
-	* install2.pm: do "doPartitionDisks" and "formatPartitions" ASAP in
-	upgrade so that miscellaneous is runned when /mnt is mounted (bugzilla
-	#8678)
-
-	* bootloader.pm: handle grub file names that do not correspond to a
-	mounted filesystem (bugzilla #14410)
-	use renamef instead of rename to create .old conf files
-
-	* Xconfig/xfree.pm: simplify
-	ensure the .old X conf is the last one
-	instead of having xorg.conf symlinked to XF86Config, do the contrary
-
-2005/03/18  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* crypto.pm: Fix downloading update rpms with ftp method.
-	Remove noisy log
-
-	* ftp.pm: Meaningful error messages
-
-2005/03/18  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Better way to list NIC modules (thx Thierry).
-	Lose the "system" calls. Use pxe.include now. Clean up some redundant
-	code.
-
-2005/03/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getUPS) move comment about serial UPS where
-	appropriate
-
-	* standalone/drakups (add_device_wizard) fix device path when manually
-	adding an UPS (#12290)
-
-	* standalone/logdrake: fix explanation mode only displaying last line
-	(#14368)
-	(parse_file) do not horribly die
-
-	* standalone/drakperm (row_setting_dialog) better looking GUI: span groups
-	& users on
-	several columns (up to 3)
-	(we might have choosed to set number of columns depending of number
-	and max length of group/users rather than hardcoding 3 columns)
-	(get_user_or_group) do not ignore groups with empty password field
-	(#14777)
-
-	* drakxtools.spec: 10.2-9mdk
-	10.2-8mdk
-	10.2-7mdk
-
-2005/03/18  willysr
-
-	* share/po/id.po: Updated
-	Updated
-	Updated
-
-2005/03/17  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2005/03/17  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* install_steps_interactive.pm: bring back generic release-notes.txt to
-	life
-	MERGE: make it possible to read arch-specific release notes in addition
-	to
-	global (default) ones
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: fix usb devices id generation
-
-	* mdk-stage1/Makefile: pcmcia also works on x86-64 (old 10.1-branch)
-
-	* rescue/list: MERGE: fix ldso name
-
-	* install_steps_gtk.pm: MERGE: stop using dedicated X drivers on x86-64,
-	default to vesafb
-
-	* mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/cardmgr.c,
-	mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/yacc_config.h,
-	mdk-stage1/pcmcia_/cs_types.h, mdk-stage1/pcmcia_/vg468.h,
-	mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/i82365.h,
-	mdk-stage1/pcmcia_/driver_ops.h, mdk-stage1/pcmcia_/cirrus.h: merge with
-	recent enough kernel and remove osbolete (unused) stuff, also do
-	some 64-bit fixing there (forward port from cs3 and 10.1 branches)
-
-	* share/list, share/list.x86_64, share/list.i386: mdadm for everyone, fix
-	ldso linker name for other arches
-
-	* devices.pm: MERGE: don't be so i586 centric
-
-2005/03/17  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/thirdparty.c: probe in automatic mode to create devices (and
-	really check for mount return code)
-	fix return code check
-	message fix again
-	more message fixes
-	fix/enhance messages
-	look for modules in /install/thirdparty first
-
-	* network/adsl.pm: vpi is given as hex too (though it doesn't matter much
-	since it's
-	merely always less than or equal to 9)
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: use sata modules too
-
-	* standalone/drakconnect: fill at least the DEVICE field for
-	non-configured devices
-	allow to modify non configured devices in manage interface
-
-2005/03/17  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/monitor.pm, Xconfig/main.pm, Xconfig/xfree.pm: use
-	monitor-probe-using-X
-
-	* mygtk2.pm: ensure the val registrations are kept ordered
-
-	* common.pm: ensure this bloody stupid code doesn't break things when it
-	is unused
-
-	* install_steps_interactive.pm: simplify
-
-	* mdk-stage1/doc/UPDATEMODULES, install_steps.pm: give ability to tell in
-	which list_modules category is a module
-
-	* Xconfig/resolution_and_depth.pm: 
-	  - simplify GUI: don't have a "ratio" combo. have the resolutions from
-	current ratio by default and allow "Other" to see all others
-	  - by default 1280x1024 is now in 4/3, not 5/4 (stupid bloody
-	resolution!)
-	have 1280x1024 in both 4/3 and 5/4 ratios
-
-	* share/rpmsrate: we may need monitor-probe-using-X installed to configure
-	X during install
-	(XFdrake already require monitor-edid)
-
-2005/03/17  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Fixed queue name auto-generation, it sometimes hanged in an endless
-	loop
-	(bugs #14426, #14525, #14563).
-
-2005/03/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: temporary move collate sorting into net wizard in
-	order to minimize possible side effects
-
-	* drakxtools.spec: add an item to 10.2-6mdk's log
-
-	* interactive.pm: temporary move collate sorting into net wizard in order
-	to minimize possible side effects
-	(ask_from_normalize) use newly introduced set_l10n_sort() in order to
-	have proper localized sorting (#14634)
-
-	* common.pm (set_l10n_sort) import comments from rpmdrake
-	(set_l10n_sort) do not bother touch LC_ALL
-	(set_l10n_sort) stole it from rpmdrake
-
-2005/03/17  willysr
-
-	* share/po/id.po: Updated
-	Updated
-
-2005/03/16  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* bootloader.pm: 
-	  - cluster without capturing
-
-2005/03/16  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/tools.h: cdrom support in third-party module
-
-	* mdk-stage1/tools.c: 
-	  - merge update_modules stuff in third-party module
-	  - add "thirdparty" as an alias for the "updatemodules" option
-	  - allow to specify thirdparty device using automatic "thirdparty"
-	option
-	  - try to mount as iso9660 too in try_mount
-	cdrom support in third-party module
-
-	* mdk-stage1/thirdparty.c: 
-	  - merge update_modules stuff in third-party module
-	  - add "thirdparty" as an alias for the "updatemodules" option
-	  - allow to specify thirdparty device using automatic "thirdparty"
-	option
-	  - try to mount as iso9660 too in try_mount
-	fail if device doesn't match anything
-	cdrom support in third-party module
-
-	* mdk-stage1/Makefile: allow to clean local directory only
-	partition.c is used only in disk installs for now
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c, mdk-stage1/stage1.h,
-	mdk-stage1/modules.h: 
-	  - merge update_modules stuff in third-party module
-	  - add "thirdparty" as an alias for the "updatemodules" option
-	  - allow to specify thirdparty device using automatic "thirdparty"
-	option
-	  - try to mount as iso9660 too in try_mount
-
-2005/03/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po, share/po/sv.po, share/po/fr.po: updated French, Basque
-	and Swedish files
-
-2005/03/16  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: fix dropping line macos in yaboot.conf (bugzilla #14642)
-
-2005/03/16  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install2.pm: Allow to specify "suppl" and "askmedia" in the
-	kernel command-line as well as in the hdlists file
-
-	* share/po/fr.po: Fix typo
-
-	* share/po/id.po: Fix po syntax
-
-2005/03/16  shivahuang
-
-	* share/po/zh_TW.po: updated po files
-
-2005/03/16  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/default.pm: 
-	  - Fixed setting of default printer on daemon-less CUPS client (bug
-	#13940).
-
-2005/03/16  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: finalized slovak translation for 10.2
-
-2005/03/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/localedrake: enable to enable/disable utf-8
-	ensure there's never a "previous" button on first step
-
-	* any.pm: enable to enable/disable utf-8
-
-	* drakxtools.spec: 10.2-6mdk
-
-	* interactive/gtk.pm (ask_fromW) remove dead code
-	(ask_fromW) remove unecessary sync (which was needed to workaround
-	CList bug but now make TreeViews breaking CheckBoxes)
-
-2005/03/16  willysr
-
-	* share/po/id.po: Updated
-	Updated
-	Updated
-
-2005/03/15  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm, network/adsl.pm: allow drakconnect to display
-	multiple instances of the same adsl device
-
-2005/03/15  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* any.pm, pkgs.pm, install_any.pm: Install kernel-xbox on XBOX, bypass
-	bootloader setup and eject call
-
-2005/03/15  mareklaane
-
-	* share/po/et.po: Fixed translation.
-
-2005/03/15  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: allow drakconnect to display multiple instances
-	of the same adsl device
-	fix comment
-	fix unicorn packages installation
-	do not compare translated string, on Pixel's advice
-	allow not to set gateway device (#14633)
-
-	* network/adsl.pm: allow drakconnect to display multiple instances of the
-	same adsl device
-
-	* mdk-stage1/stage1.c, install_any.pm: fix pcmcia modules loading
-
-2005/03/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/cy.po: updated Italian and Welsh files
-
-2005/03/15  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/empty.pm: do not drop field {info} that can be created
-	in zero_MBR
-	do not drop field {info} that can be created in zero_MBR
-	do not drop field {info} that can be created in zero_MBR
-
-	* c/stuff.xs.pl, detect_devices.pm, modules.pm, install_any.pm,
-	share/list: 
-	  - add dmi_probe()
-	  - some special code on dmi is now moved in dmitable with flags Pkg:
-	and Module:
-
-	* bootloader.pm: fix typo
-
-	* Xconfig/main.pm: 
-	  - new function Xconfig::monitor::is_valid()
-	  - new function Xconfig::monitor::probe() which probes DDC, then
-	fallbacks on DMI
-
-	* Xconfig/monitor.pm: 
-	  - new function Xconfig::monitor::is_valid()
-	  - new function Xconfig::monitor::probe() which probes DDC, then
-	fallbacks on DMI
-	don't pass $monitors_db around, use memoized monitors_db()
-
-2005/03/15  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Fix cdrom device name
-
-2005/03/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm: install scim-input-pad too for japanese
-
-	* drakxtools.spec: 10.2-5mdk
-
-2005/03/14  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* share/rpmsrate: install setarch by default on x86_64, add provisions for
-	a320raid-kernel
-	drivers, add 32-bit compat galaxy gnome theme
-
-2005/03/14  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/03/14  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/shorewall.pm: allow connections from local net to firewall
-	(#14586)
-
-	* network/adsl.pm: remove eagle-usb_must_be_configured file
-	fix and force CMVs symlink creation
-
-2005/03/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po: fixed encoding
-	fixed syntax errors
-
-	* share/po/ja.po, share/po/wa.po: updated Japanese file
-
-2005/03/14  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: fix netmask string..
-
-2005/03/14  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/bootloader-config: ensure we have /sbin in our PATH
-
-2005/03/14  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Fix typo
-
-	* share/po/zh_CN.po: Fix newline issue
-
-	* install_any.pm: Change the code for the rpm copying progress bar to
-	avoid forking.
-
-	* crypto.pm: Update mirror list
-
-	* install_steps_gtk.pm: Don't die while upgrading if
-	/var/ftp/pub/Mandrakelinux isn't there (bug #14585)
-
-2005/03/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: fix netmask message after funda fixed blino message
-
-	* share/po/br.po: update
-	fix netmask message after funda fixed blino message
-
-2005/03/14  willysr
-
-	* share/po/id.po: Delete Conflict Indicator and Little Update
-	Little Update
-	Updated
-	Updated
-	Updated again
-	Downgrade one version
-	updated
-
-2005/03/13  mbukovjan
-
-	* share/po/cs.po: Updates to Czech translations
-
-2005/03/13  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/xfree.pm: add some xxXGA names
-
-	* any.pm: fix looking for the user uid.gid
-
-	* bootloader.pm: don't die when we have no entries in grub menu.lst
-
-2005/03/13  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-	* DrakX
-
-2005/03/13  willysr
-
-	* share/po/id.po: Updated
-
-2005/03/12  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, network/netconnect.pm, share/po/be.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	standalone/drakconnect, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/lv.po,
-	share/po/hu.po, share/po/fa.po, share/po/id.po, share/po/ru.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: s/Netmask
-	address/Netmask/. typo fix
-
-	* share/po/zh_CN.po: s/Netmask address/Netmask/. typo fix
-	Updated Simplified Chinese translation
-	Updated Simplified Chinese translation
-
-2005/03/12  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: jorge
-
-2005/03/12  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: Updates
-	soft/control-center/po/da.po gi/perl-install/share/po/da.po
-
-2005/03/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/vi.po: updated Vietnamese file; corrected
-	syntax error in Chinese file
-
-2005/03/11  mareklaane
-
-	* share/po/et.po: Updated translation.
-
-2005/03/11  Olivier Blin <oblin at mandrakesoft.com>
-
-	* install_any.pm: remove useless /
-	really create ISO images mountpoint (me sux)
-	use full path to rpms for ISO media
-
-	* network/adsl.pm: fix typo (linetype for eagle-usb)
-
-2005/03/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ltg.po, share/po/nb.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/tg.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* share/po/be.po, share/po/ar.po, share/po/br.po, share/po/am.po,
-	share/po/cy.po, share/po/bs.po, share/po/az.po, share/po/bg.po: updated
-	pot file
-	updated pot file
-
-2005/03/11  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: grf, translate last minute strings
-
-2005/03/11  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/xfree.pm: for 1400x1050, put the resolutions (60 and 75Hz are
-	already in extramodes, but they are GTF modelines, we can overrule them)
-
-2005/03/11  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm: When removing duplicate physical media, take DVDs
-	into account as well as CDs
-
-	* install_any.pm: Use library functions
-	Create an empty MD5SUM file to make urpmi happy
-	Don't stack information windows on top of another
-	Eject last CD after copy of rpms on disk
-
-2005/03/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/uk.po, share/po/eu.po, share/po/bn.po, share/po/ms.po,
-	share/po/am.po, share/po/ko.po, share/po/sl.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/hr.po, share/po/ja.po, share/po/zh_CN.po,
-	share/po/tr.po, share/po/cs.po: fix translations
-
-2005/03/10  fisher
-
-	* share/po/uk.po: tr-tion update
-
-2005/03/10  huftis
-
-	* share/po/nn.po: Updated Norwegian Nynorsk translation.
-
-2005/03/10  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/modem.pm: use a higher timeout for modem dialing (#10814)
-
-	* install_any.pm: don't spawn a shell if stage2 isn't run directly
-	setup urpmi media for ISO images
-
-	* network/netconnect.pm, mdk-stage1/thirdparty.c: fix messages
-
-2005/03/10  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone.pm: help perl
-
-	* Xconfig/monitor.pm: cleanup
-	simplify
-	we don't want the 4/3 detailed_timings otherwise they conflict with the
-	Xorg builtin vesamodes
-
-	* partition_table/dos.pm: catch bad use of get_rawCHS()
-
-	* Xconfig/xfree.pm: don't add modelines for 1280x1024, they are already in
-	standard vesamodes (builtin Xorg)
-	when adding gtf modelines, have them sorted with high frequencies first
-	(since Xorg prefer the first matching modeline (!))
-
-2005/03/10  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Put a wait message for copying rpms from CDs
-
-2005/03/10  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* diskdrake/interactive.pm, partition_table/raw.pm, fs/type.pm: Diskdrake
-	mods for XBox (thks Pixel)
-
-2005/03/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ltg.po, share/po/ky.po, share/po/am.po, share/po/cy.po,
-	share/po/fur.po, share/po/vi.po, share/po/tl.po, share/po/uz@Latn.po:
-	fix kde merge
-	further merge with KDE
-	remove duplicated string
-	remove uneeded string
-	merge in new strings
-
-	* standalone/harddrake2 (upload) remove uneeded string
-	enable to upload the hardware list
-
-	* Xconfig/monitor.pm (getinfoFromDDC) fix crash (eg when called from
-	hwdb-clients)
-
-	* run_program.pm (raw) ensure runned programs are logged in explanations
-
-	* share/po/DrakX.pot, share/po/Makefile: merge in new strings
-
-	* share/po/br.po, share/po/fr.po: fix kde merge
-	further merge with KDE
-	update
-	remove duplicated string
-	remove uneeded string
-	merge translations from KDE
-	merge in new strings
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/mn.po, share/po/lt.po, share/po/tg.po, share/po/bs.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/ta.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/bg.po, share/po/cs.po: fix kde merge
-	further merge with KDE
-	remove duplicated string
-	remove uneeded string
-	merge translations from KDE
-	merge in new strings
-
-	* drakxtools.spec: 10.2-4mdk
-	harddrake: require hwdb-clients
-
-2005/03/10  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/monitor.pm: we don't want the 4/3 detailed_timings otherwise
-	they conflict with the Xorg builtin vesamodes
-
-	* standalone.pm: help perl
-
-2005/03/10  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/03/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: hide wlan-ng settings for non-root users
-	make wpa_supplicant.conf readable by root only
-
-2005/03/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* Makefile: ga translation level has been leveraged up
-
-2005/03/09  mareklaane
-
-	* share/po/et.po: Translation fixes.
-
-2005/03/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/stage1.h: expert mode is dead
-
-	* mdk-stage1/disk.c: fix message
-	move partition stuff in partition.c and common disk stuff in tools.c
-
-	* mdk-stage1/thirdparty.h, mdk-stage1/thirdparty.c: initial import (allow
-	to load thirdparty modules from disks)
-
-	* mdk-stage1/Makefile: don't forget to link with third_party stuff
-	move partition stuff in partition.c and common disk stuff in tools.c
-
-	* network/netconnect.pm, network/network.pm, network/ethernet.pm,
-	standalone/drakconnect: write selected dhcp client in ifcfg files
-
-	* mdk-stage1/probing.c: do ask for modules here, it is already done when
-	needed
-	wait for mass storage devices to be detected
-	add log message when looking for scsi adapters
-
-	* mdk-stage1/partition.c, mdk-stage1/tools.h, mdk-stage1/partition.h: move
-	partition stuff in partition.c and common disk stuff in tools.c
-
-	* mdk-stage1/stage1.c: expert mode is dead
-	do not ask for third party modules here, it's available from main menu
-	allow to use new third party stuff from main menu
-	probe usb devices before trying to use third party modules
-
-	* mdk-stage1/tools.c: expert mode is dead
-	move partition stuff in partition.c and common disk stuff in tools.c
-
-2005/03/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* Makefile: updated list of too low languages
-
-	* share/po/sl.po: updated Slovenian file
-
-2005/03/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	update
-
-	* network/netconnect.pm: better looking text
-
-	* Makefile: ga translation level has been leveraged up
-
-	* network/ethernet.pm (get_eth_cards) update comments
-	(get_eth_cards) do not overwrite driver name with sysfs one when we
-	already got it from ethtool, thus fixing bogus names registered though
-	pci layer in kernel (#14163)
-
-	* drakxtools.spec: 10.2-3mdk
-
-2005/03/09  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: rc1 logo
-
-2005/03/08  Funda Wang <fundawang at linux.net.cn>
-
-	* share/rpmsrate: removed obsolete IMEs for zh_TW
-
-2005/03/08  Olivier Blin <oblin at mandrakesoft.com>
-
-	* drakxtools.spec: use full path for net_applet icon in menu entry
-	(#14346)
-
-	* network/network.pm (wpa_supplicant_configure) scan hidden ssid
-
-2005/03/08  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: choose a 4/3 resolution by default
-	xbox support (by Stew)
-
-	* bootloader.pm: please perl_checker differently
-
-	* Makefile: Vera is now in xorg
-
-2005/03/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Disable progress bar when copying rpms from CDs. (The
-	change CD dialog
-	clashes with it)
-
-2005/03/08  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* mouse.pm: mousedrake, detectloader support for XBox
-
-	* bootloader.pm: perl_checker - bad /me
-	mousedrake, detectloader support for XBox
-
-2005/03/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* interactive.pm, standalone.pm, ugtk2.pm: log program exiting
-
-	* security/msec.pm (load_values) fix getting value when it's defined but 0
-	(#14364)
-	(get_function_value) fix getting value when it's 0 (#14364)
-
-	* drakxtools.spec: fix 10.2-2mdk's changelog
-	10.2-2mdk
-
-	* share/rpmsrate: install scim-input-pad for japanese users
-
-2005/03/08  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm (wpa_supplicant_configure) scan hidden ssid
-
-2005/03/08  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: choose a 4/3 resolution by default
-	xbox support (by Stew)
-
-2005/03/08  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/03/07  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: use fonts-ttf-dejavu instead of fonts-ttf-vera (bug
-	#13493).
-
-2005/03/07  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: added gcin setup
-	Added settings for new traditional chinese IME gcin.
-
-2005/03/07  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakconnect: handle NEEDHOSTNAME and DHCP_HOSTNAME in Manage
-	interface
-	move DHCP settings in a notebook page
-
-	* network/netconnect.pm: delete gateway if appropriate when configuring
-	DSL devices too (#13978)
-
-	* mdk-stage1/dhcp.h: export dhcp_domain too
-
-	* mdk-stage1/network.c: remove spurious space
-	try to reuse hostname and domain information from dhcp step (#14285)
-	ask if the http proxy should be used for ftp (#13492)
-	don't segault if proxy step is cancelled
-
-2005/03/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po: updated Bengali file
-
-2005/03/07  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: more and more fixes
-
-2005/03/07  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm: allow live resizing of reiserfs on lvm (as
-	tested by Gaetan Lehmann). not tested
-
-	* share/themes-galaxy.rc, install_gtk.pm, share/themes-blue.rc,
-	share/list: 
-	  - by default, gtk use /usr/share/themes/Galaxy/gtk-2.0/gtkrc,
-	so add this gtkrc to the install, and so no need
-	  to have galaxy settings in themes-galaxy.rc
-	  => this fixes the doc theme not having the good shapes for the buttons
-	  - fix the worst pb in themes-blue.rc (even if we don't use it)
-
-2005/03/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-1mdk
-
-	* share/po/br.po: update
-
-2005/03/06  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: more fixes..
-
-2005/03/06  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm, diskdrake/resize_ntfs.pm: ensure ntfsresize is
-	available
-
-2005/03/06  shivahuang
-
-	* share/po/zh_TW.po: updated po files
-
-2005/03/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: proofreading (gerard delafond)
-
-2005/03/06  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/03/05  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: set Linetype in eagle-usb.conf to use CMVs
-	create CMV symlinks for both POTS and ISDN lines
-
-2005/03/05  shivahuang
-
-	* share/po/zh_TW.po: updated po files
-
-2005/03/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: CMV support for eagle-usb
-
-	* mdk-stage1/probing.c: remove unused variable
-
-	* network/netconnect.pm: copy provider_id tag too
-	add @network::ethernet::dhcp_clients
-
-	* detect_devices.pm: add is_lan_interface
-
-	* mdk-stage1/stage1.c: set MODE_TESTING too if DEBUGSTAGE1 is set
-
-	* standalone/drakconnect: perl_checker fix
-	allow to modify DHCP settings too
-	use detect_devices::is_lan_interface
-
-	* network/ethernet.pm: add @network::ethernet::dhcp_clients
-
-	* network/adsl_consts.pm: use provider_id as key instead of id
-	add provider IDs, comments, cleanups
-
-2005/03/04  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: 100% good to go!:)
-	A few more fixes:)
-	100%!
-	:)
-
-2005/03/04  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: do not check yaboot "magic" on ppc (it seems the magic we
-	have is somewhat wrong), assuming we have yaboot installed (it is the
-	only handled bootloader anyway)
-
-2005/03/04  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm: Disallow to delect the first media listed in the
-	"hdlists" file.
-
-	* pkgs.pm: Modify new string in order to merge with KDE translations
-	Fix passing installation method instead of description to
-	install_any::getFile
-	Add a wait message when downloading hdlists from network
-
-	* share/po/fr.po: Translation nit
-
-	* install_any.pm: Add an explicit error message instead of a built-in
-	cryptic one (bug #14243)
-
-2005/03/04  shivahuang
-
-	* share/po/zh_TW.po: updated po files
-
-2005/03/04  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/default.pm: 
-	  - Let printerdrake recognize if the user edited /etc/cups/client.conf
-	manually.
-
-2005/03/03  huftis
-
-	* share/po/nn.po: Updated Norwegian Nynorsk translation.
-
-2005/03/03  Olivier Blin <oblin at mandrakesoft.com>
-
-	* detect_devices.pm: add ralink RT2x00 interfaces type in comment
-
-	* network/netconnect.pm: delete gateway settings if gateway device is
-	invalid too (#11761)
-
-2005/03/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: Added translation for "recommended"
-	string
-
-2005/03/03  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm, install_any.pm: perl_checker fixes
-	Add a progress bar when copying rpms from the media to the hard disk
-
-	* commands.pm: Avoid unnecessary stats.
-
-	* share/po/nb.po: Fix .po syntax
-
-2005/03/03  shivahuang
-
-	* share/po/zh_TW.po: updated po files
-	updated po files
-
-2005/03/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	update
-
-2005/03/03  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Sync with Arabeyes CVS
-
-2005/03/02  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_applet: refresh every second, and do not reread network
-	conf at each refresh
-
-	* network/netconnect.pm: delete gateway settings if reconfiguring the
-	gateway interface to dhcp
-
-2005/03/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_TW.po: fixed menu
-
-	* share/po/af.po: updated po file
-	small fix in Afrikaans file
-
-	* share/po/bg.po: fixed menus
-
-2005/03/02  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: handle boot-as and master-boot (bugzilla #13846)
-	fix comment
-
-	* Xconfig/xfree.pm: add the various "names" for standard resolutions
-	sort CVT_ratios by preference
-	"keyboard" InputDevice can also be called "kbd"
-
-	* install_any.pm: screenshot_dir__and_move(): use /tmp which is ramdisk
-	instead of /tmp/stage2 which is now always read-only
-
-2005/03/02  rstandtke
-
-	* share/po/de.po: some additions
-
-2005/03/02  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - Made the "(recommended)" in the printer/driver lists translateable
-	(bug
-	10651)
-
-	* share/rpmsrate: 
-	  - Let hardware-specific GUI tools for HP printers not be installed by
-	default
-	during installation. They get only preloaded now, so that printerdrake
-	  can install them if needed (bug 13957).
-
-2005/03/02  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/03/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: fix 10.2-0.35mdk's changelog
-	10.2-0.35mdk
-
-	* ugtk2.pm (create_scrolled_window) Gtk2::Html::View has native scrolling
-	support and
-	thus behave badly with GtkViewport
-
-2005/03/01  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* any.pm: 
-	  - webclient alternative is obsolete, launch browser with new
-	/usr/bin/www-browser
-	  - check and launch browser according to wm
-
-	* standalone/drakbug: 
-	  - load link with /usr/bin/www-browser
-	  -  use any::launch_browser_with_wm func to launch better suited
-	browser
-
-	* standalone/drakhelp: 
-	  - load link with /usr/bin/www-browser
-	  - use any::launch_browser_with_wm
-
-2005/03/01  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: add i18n packages for mozilla-firefox
-
-2005/03/01  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/probing.c: do not show a dialog box before loading network or
-	SCSI drivers, we'll
-	load it anyway ...
-
-	* diskdrake/interactive.pm: remember encryption algorithm
-	allow to choose encryption algorithm (#13472)
-
-2005/03/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po: corrected syntax error
-
-2005/03/01  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: more proof reading
-
-2005/03/01  pjetur
-
-	* share/po/is.po: Small fixes
-
-2005/03/01  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive.pm: when testing, don't silently default to newt
-
-	* mygtk2.pm: stringify using a perl_checker compliant way
-	  - handle {list_ref} in ComboBox
-	  - handle more than one {ref} per widget
-	  - check that the string value of the ref doesn't change when it is set
-	(maybe we should remove the REF or SCALAR prefix?)
-
-	* Xconfig/monitor.pm: fix typo
-	create {preferred_resolution} out of the edid detailed_timings and use
-	it
-	skip detailed_timings flagged bad_ratio
-
-	* bootloader.pm: fix buggy get_append_memsize() (bugzilla #13874)
-
-	* Xconfig/resolution_and_depth.pm: add a ratio choice, and restrict the
-	resolutions to this choice
-	  - sort the whole resolutions to simplify the code, and get better
-	choices
-	  - add a failsafe resolution
-	create {preferred_resolution} out of the edid detailed_timings and use
-	it
-
-	* Xconfig/xfree.pm: add 1280x600 for VAIO PCG-C1M (bugzilla #5192)
-	give up trying to only add modelines not defined in xorg, otherwise xorg
-	will prefer the modelines we give here (eg: it will use 1024x768@50
-	whereas it could use 1024x768@60)
-	  - when setting a resolution, create associated gtf modelines for
-	various standard vfreqs
-	(but don't do it for builtin_ModeLines (cf vesamodes and extramodes in
-	xorg))
-	  - drop the Dell modelines (this is now cleanly handled)
-	  - drop the Vaio modeline (but this modeline was not gtf, will it work
-	with the gtf modeline?)
-	  - export {ModeLine} raw to allow playing with pre_comment
-
-	* Xconfig/parse.pm: fix section with only comments (putting the comment
-	after the EndSection is wrong)
-
-	* lang.pm: configure iocharset and codepage option for hal
-
-2005/03/01  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Make sure that recommended driver is preselected in expert mode,
-	even if the
-	recommended driver is a manufacturer-supplied PPD with language tag.
-	  - Added possibility to add a remote LPD printer in beginner's mode
-	(bug 13734)
-	  - Fixed incorrect display of accentuated characters in PPD options
-	also for
-	  boolean options (bug 13928)
-	  - Let detected LPD printer model be shown in a pop-up window and not
-	in the
-	  add printer wizard
-	  - Let detected socket printer model be shown if the IP/port was
-	manually
-	  entered
-	  - Small fix on selection of test pages
-	  - Fixed add printer wizard ("Previous" and "Cancel") for printerdrake
-	being
-	  run embedded in the MCC (bug 13929).
-
-2005/03/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/ethernet.pm (get_eth_cards) workaround buggy kernel until
-	provided patch got applied (#12609)
-	(get_eth_cards) backport fixes from HEAD:
-	  - workaround buggy kernel until provided patch got applied (#12609)
-	  - do not rely on broken ethtool from hostap drivers (#13979)
-
-	* ugtk2.pm (Gtk2::ComboBox::set_popdown_strings) clear model before
-	filling the list
-
-	* share/rpmsrate: do not install gftp with gnome, it's not HIG compliant,
-	it's not
-	gtk+2, it's bog prone and browser & nautilus are better
-
-	* Makefile.drakxtools, Makefile: fix build after pixel's pass
-
-	* drakxtools.spec: 10.2-0.34mdk
-	10.2-0.33mdk
-
-	* share/po/fr.po: fix bogus translation
-
-2005/02/28  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/28  mbukovjan
-
-	* share/po/cs.po: Updated Czech translation.
-
-2005/02/28  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/ethernet.pm: do not rely on broken ethtool from hostap drivers
-
-	* drakxtools.spec: add net_applet menu entry
-
-	* network/netconnect.pm: enhance "wrong network mask format" message
-	(#10712)
-	allow to modify DHCP timeout
-	handle PEERYP and PEERNTPD too (#9982)
-	peerdns support (and assorted space fixes)
-	apply USERCTL settings for modems too
-
-	* standalone/net_applet: netprofile support, allow to select watched
-	interface
-
-	* standalone/drakconnect: enhance "wrong network mask format" message
-	(#10712)
-
-	* network/network.pm: write DHCP_TIMEOUT for DHCP connections
-	write PEERYP and PEERNTPD for DHCP connections
-	write PEERDNS for DHCP interfaces
-
-2005/02/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fr.po: updated French file
-
-	* keyboard.pm: define 'compose:rwin' in XkbOptions when
-	$keyboard->{GRP_TOGGLE}
-	is different than "rwin_toggle" and also when $keyboard->{GRP_TOGGLE}
-	is not defined.
-
-	* share/po/sl.po: updated Slovenian file
-	updated Slovenian file
-
-	* share/po/vi.po: updated Vietnamese file
-
-	* share/po/fa.po, share/po/nl.po, share/po/it.po, share/po/bs.po,
-	share/po/sk.po, share/po/br.po, share/po/cy.po, share/po/et.po,
-	share/po/ja.po, share/po/da.po, share/po/pt.po: updated Welsh, Persian,
-	Italian adn Japanese files;
-	ran msgmerge on all *.po files
-
-2005/02/28  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: minor fixes
-	updates from eskild hustvedt:)
-	a few fixes
-
-2005/02/28  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/make_partimage_save_rest_all, rescue/make_rescue_img: 
-	  - in rest_all, try to restore from the cdrom
-	  - remove the debugging setting of leia as the partimage server
-
-	* Xconfig/resolution_and_depth.pm: 
-	  - remove ddcxinfos, replaced by monitor-edid (which is in a separate
-	package)
-	  - add many resolutions (they are structured by aspect ratio for next
-	move)
-	  - put the "Monitor preferred modeline" from EDID in xorg.conf
-	  - for this ModeLine must be exported from the monitor section
-	  - specifying a VendorName|ModelName in auto_inst is valid, don't
-	overwrite it with edid probe
-	  - the strange /dev/zero needed (?) by ddcxinfos is no more needed
-	  - field {size} is now {diagonal_size}, and is no more "corrected"
-	  - add @CVT_ratios and @CVT_vfreqs (unused at the moment)
-	  - Getopt::Long is needed by monitor-parse-edid
-	  - drop hashes
-	  - handle lower than 640 resolutions
-	(prepare for next move, introducing aspect ratio in choose_gtk)
-
-	* mdk-stage1/disk.c, mdk-stage1/cdrom.c, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/directory.c: new option "keepmounted" to
-	allow the rescue media to be kept mounted
-
-	* Xconfig/various.pm, any.pm, Makefile.config, drakxtools.spec,
-	share/list, Xconfig/xfree.pm, Makefile.drakxtools, Xconfig/monitor.pm,
-	tools/Makefile, install2.pm: 
-	  - remove ddcxinfos, replaced by monitor-edid (which is in a separate
-	package)
-	  - add many resolutions (they are structured by aspect ratio for next
-	move)
-	  - put the "Monitor preferred modeline" from EDID in xorg.conf
-	  - for this ModeLine must be exported from the monitor section
-	  - specifying a VendorName|ModelName in auto_inst is valid, don't
-	overwrite it with edid probe
-	  - the strange /dev/zero needed (?) by ddcxinfos is no more needed
-	  - field {size} is now {diagonal_size}, and is no more "corrected"
-	  - add @CVT_ratios and @CVT_vfreqs (unused at the moment)
-	  - Getopt::Long is needed by monitor-parse-edid
-
-	* rescue/list: add xfs_repair to the rescue (bugzilla #10488)
-
-	* bootloader.pm: fix typo
-	have install.sh 755 (as suggested by Vincent Meyer)
-
-2005/02/28  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm: Make regexps a bit more lenient.
-
-2005/02/28  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Bugzilla 13998 - Sort list of nbis.
-	Bugzilla 14031 - cleint files created as char devices.
-
-2005/02/28  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm, install_steps_interactive.pm: 
-	  - Let country and not language decide about default paper size
-
-2005/02/28  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/02/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: fix adding net_applet menu entry
-	10.2-0.32mdk
-
-	* share/po/br.po: update
-	typo fixes
-
-2005/02/28  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic QA
-	QA for Arabic
-
-2005/02/27  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/27  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-	* DrakX
-	Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-	* DrakX
-
-2005/02/26  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: translated new 78 messages
-
-2005/02/26  vljubovic
-
-	* share/po/bs.po: Latest changes to Bosnian files
-
-2005/02/25  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-
-2005/02/25  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: write USERCTL too
-
-	* network/netconnect.pm: pre-detect modem device (instead of mouse device
-	...) and do it at the
-	right place
-	remove debug code (spotted by Pixel)
-	allow to enable USERCTL
-	space fixes
-	space fixes
-	allow to select "unlisted" provider in adsl provider list
-
-	* network/tools.pm: do not ask for root password if interface allows
-	USERCTL
-
-2005/02/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po: updated Bengali file
-
-	* share/po/wa.po: small update
-
-	* share/po/sv.po, share/po/gl.po: updated Swedish file; corrected
-	"default:LTR" entry for Galician
-
-	* keyboard.pm: changed keyboard to "us" for Chinese
-
-2005/02/25  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: now that i understand hsync and vsync,
-	i can filter using HorizSync much more nicely :)
-
-2005/02/25  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Driver "oki4w" was renamed to "oki4drv". Adapted printerdrake
-	appropriately
-
-2005/02/25  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-	updated slovak translation
-
-2005/02/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakxtv: perl_checker fixes
-
-	* standalone/drakfont (backend_mod) fix uninstalling fonts (#9324)
-	(backend_mod) fix uninstalling fonts (#9324)
-	rollback unwanted changes
-	(backend_mod) fix uninstalling fonts (#9324)
-
-	* drakxtools.spec: 10.2-0.31mdk
-	10.2-0.30mdk
-
-	* share/po/ja.po: fix wrong key accelerator (#13540)
-
-	* standalone/draksec: rollback unwanted changes
-
-	* standalone/logdrake: simplify
-	perl_checker fixes
-
-	* share/po/br.po: update
-
-	* standalone/drakconnect: perl_checko fixes (especially fix wrong message)
-
-2005/02/24  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation.
-
-2005/02/24  huftis
-
-	* share/po/nn.po: Updated Norwegian Nynorsk translation.
-
-2005/02/24  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	soft/control-center/po/da.po soft/mdkonline/po/da.po
-	soft/urpmi/po/da.po gi/perl-install/share/po/da.po
-
-2005/02/24  mareklaane
-
-	* share/po/et.po: Updated translation.
-
-2005/02/24  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: do not update kde config file if kde isn't installed
-	(spotted by Mathieu Geli)
-	fix typos
-	minimal WPA support
-	always restart wlan-ng interface
-	move wlan-ng stuff in network::network
-
-	* network/tools.pm: minimal WPA support
-
-	* network/netconnect.pm: minimal WPA support
-	move wlan-ng stuff in network::network
-	space cleanup
-	spaces cleanup
-
-2005/02/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* standalone/net_applet: no space before question marks in English
-	no space after colon in English
-
-	* printer/printerdrake.pm: move "HPOJ" and "HPLIP" as parameters of
-	translatable strings,
-	so common phrases need to be translated only once.
-	perl_cheker doesn't like a line break between function name and
-	parenthesis
-
-	* share/po/nn.po, share/po/wa.po: updated Walloon file
-	updated pot file
-
-	* share/po/da.po, share/po/eu.po: updated Basque and Danish files
-	updated pot file
-
-	* share/po/es.po: updated Spanish file
-	updated pot file
-
-2005/02/24  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/mount_options.pm: if we remove a weird option, also remove nodev,
-	noexec and nosuid
-	(but don't do it everytime, since those options can be usefully used for
-	/tmp for example)
-	fix typo
-	fix typo
-	fix typo
-
-2005/02/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/lt.po: merge in strings from urpmi & rpmdrake
-
-	* standalone/drakups: perl_checker fixes
-	fix reading UPS db: some UPS have the same name but differes in the
-	way they're plugged into the system (eg: USB vs serial cable), so we
-	need to differ them through the "extra" field
-	adapt to new Libconf API
-
-	* share/po/br.po: merge in strings from urpmi & rpmdrake
-	update
-	minor update
-
-	* drakxtools.spec: 10.2-0.29mdk
-
-	* .perl_checker: blacklist bad Libconf package
-
-	* share/po/eo.po: merge in strings from urpmi & rpmdrake
-	update
-
-	* share/po/id.po, share/po/ro.po, share/po/mk.po, share/po/th.po,
-	share/po/af.po, share/po/az.po, share/po/sr@Latn.po, share/po/ko.po,
-	share/po/bg.po, share/po/lv.po: update
-
-	* standalone/drakxtv: explain
-	fix #13865: scan TV channels for TV ocards that do not require any
-	driver configuration
-
-2005/02/24  willysr
-
-	* share/po/id.po: Updated
-
-2005/02/23  fisher
-
-	* share/po/uk.po: ukrainian tr-tion update
-
-2005/02/23  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakconnect: remove spurious spaces
-
-	* network/modem.pm: remove all non-digit characters in phone number
-	(#10813)
-
-	* network/network.pm: handle wpa_supplicant files
-
-2005/02/23  Pixel  <pixel at mandrakesoft.com>
-
-	* install_any.pm: fix
-
-	* interactive/gtk.pm: 
-	  - fix displaying "Advanced" instead of "Basic" in advanced_state by
-	default
-	  - cleanup
-
-	* ugtk2.pm: fix usage of create_file_selector()
-
-	* common.pm: cleanup is_xbox() here too
-
-	* detect_devices.pm: write code correctly
-	"pae" flag in the cpu is needed for new kernel
-	SuSE also have "Hand Held" as a laptop (ch_type in { 8, 9, 10, 11, 14 })
-
-2005/02/23  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* ugtk2.pm: Force to open file selector as a modal window (bug 13942)
-
-	* share/po/zh_TW.po: Fix missing \n
-
-2005/02/23  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* keyboard.pm, detect_devices.pm, common.pm, Xconfig/monitor.pm,
-	Xconfig/xfree.pm: XBox support - XFdrake
-
-	* standalone/drakbackup, standalone/drakTermServ: Drop banner, using up
-	too much window space. Perl_checker mods.
-
-2005/02/23  shivahuang
-
-	* share/po/zh_TW.po: merge correctly between 1.352 and 1.353
-
-2005/02/23  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Fixed bug of accentuated characters in PPDs not correctly reproduced
-	in the
-	printer options dialog.
-
-	* printer/main.pm: 
-	  - Made possible modifying the options on a non-Foomatic queue not set
-	up
-	with printerdrake.
-
-2005/02/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_any.pm (default_packages) setup acerk for another laptop (which
-	doesn't need
-	any option)
-
-	* network/adsl_consts.pm: add norwegian ADSL providers (Eskild Hustvedt)
-
-	* share/po/br.po: update
-
-2005/02/23  vljubovic
-
-	* share/po/bs.po: Fixes in Bosnian translation
-
-2005/02/22  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: finished translation for 10.2
-
-2005/02/22  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-	melo
-
-2005/02/22  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_applet: reflect new label from drakconf
-	disable activefw by default
-
-2005/02/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po: updated Bengali file
-
-	* share/po/ky.po: updated Kirghiz file
-
-	* share/po/sl.po: updated Slovenian file
-
-2005/02/22  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm, pkgs.pm: Verify free space on disk for copying
-	rpms
-
-	* install_any.pm: Fix location of hdlist for rpms copied on disk
-
-2005/02/22  rstandtke
-
-	* share/po/de.po: some fixes
-
-2005/02/22  shivahuang
-
-	* share/po/zh_TW.po: updated po files
-
-2005/02/22  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Corrected default settings for printer auto-detection in beginner's
-	mode
-
-2005/02/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakfont (interactive_mode) typo fix
-
-	* standalone/drakconnect, standalone/net_applet: reuse the very same
-	message
-	unbreak blino change: reuse string from mcc since that's what will be
-	displayed and allter *all* callers
-
-	* drakxtools.spec: 10.2-0.28mdk
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/mn.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/cs.po, share/po/uz@Latn.po: merge missing strings from mcc's
-	domain
-
-	* share/rpmsrate, lang.pm: adapt to new uim splitting
-
-2005/02/22  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic QA
-
-2005/02/21  huftis
-
-	* share/po/nn.po: Updated Norwegian Nynorsk translation.
-
-2005/02/21  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakids: add an explanation about the Gtk2::SimpleList
-	workaround
-	uggly workaround of Gtk2::SimpleList bugs
-
-2005/02/21  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: fix scim-anthy appearing twice
-
-2005/02/21  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/data.pm: 
-	  - Removed "gpr" from the packages to be installed. It is taken from
-	the distro
-	because it is not maintained anymore.
-
-2005/02/21  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/02/21  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: part. update
-
-2005/02/21  huftis
-
-	* share/po/nn.po: Updated Norwegian Nynorsk translation.
-
-2005/02/21  mareklaane
-
-	* share/po/et.po: Translation fixes.
-
-2005/02/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sl.po: updated Slovenian file
-
-2005/02/21  Pixel  <pixel at mandrakesoft.com>
-
-	* lang.pm: do URPM::add_macro in write_langs(), and require URPM instead
-	of using it
-	(for now it's only used during install) (bugzilla #13796)
-
-2005/02/21  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/02/20  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: New koi8-u font size. bug#13809
-
-2005/02/20  huftis
-
-	* share/po/nn.po: Updated Norwegian Nynorsk translation
-
-2005/02/20  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakfont: perl_checker fixes
-	really use the file selection message
-	allow to select multiple files
-
-2005/02/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: keyboard values for "lb" language.
-
-2005/02/20  pjetur
-
-	* share/po/is.po: End of days work
-	End of another day
-
-2005/02/20  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/scannerdrake: 
-	  - Let unsupported scanners be visibly marked in the scanners list (bug
-	#12049)
-	  - Load kernel modules (and make them loaded on boot) if specified in
-	ScannerDB
-	  - Tell user if his scanner requires manual editing of config files to
-	work
-	(the appropriate scanner models are marked in ScannerDB)
-
-2005/02/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: small typo fix
-
-	* keyboard.pm: small fix
-
-2005/02/19  pjetur
-
-	* share/po/is.po: More translations
-
-2005/02/19  Till Kamppeter  <till at mandrakesoft.com>
-
-	* scanner.pm: 
-	  - Added support for the new keywords MANUAL, MANUALREQUIRED, and
-	KERNEL in the
-	scanner database
-
-2005/02/18  fisher
-
-	* share/po/uk.po: translation update
-
-2005/02/18  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: scim-chinese has been renamed to scim-pinyin.
-
-	* share/rpmsrate: uim has a new gtk frontend
-	scim-chinese has been renamed to scim-pinyin.
-
-2005/02/18  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/18  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/activefw.pm: support GetReports method
-
-	* standalone/net_applet: remove spurious spaces
-	show unprocessed attacks when the applet starts
-	store attacks in a queue instead of blocking DBus bus with a Gtk2 main
-	loop
-	let the daemon handle the blacklist policy in automatic mode
-
-	* standalone/drakgw: indentation/spaces cleanups
-
-	* Makefile.config, drakxtools.spec, Makefile.drakxtools: don't package
-	drakids for now
-
-2005/02/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: a small note so I don't forget why I did it that way
-
-	* share/po/sl.po: updated po file
-	updated Slovenian file
-
-	* share/po/pt.po: updated Slovenian file
-
-2005/02/18  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm, partition_table.pm: media_browser returns
-	a filehandle when non save
-
-	* any.pm: really fix the typo!
-	fix typo
-	factorize code in ask_window_manager_to_logout_then_do()
-
-	* install_any.pm: 
-	  - add HTTP support in media_browser
-	  - HTTP support is non save only
-	media_browser returns a filehandle when non save
-
-	* diskdrake/interactive.pm: use ->ask_filename instead of ->ask_file (esp.
-	useful in "save" mode)
-	factorize code in ask_window_manager_to_logout_then_do()
-	don't reboot if the window manager did not exit
-	media_browser returns a filehandle when non save
-
-	* install_steps.pm: generated auto_install.cfg.pl can contain a somewhat
-	empty printer config, but not really empty
-	don't let upNetwork break /etc/protocols when the install is not done
-	yet
-	generated auto_install.cfg.pl can contain a somewhat empty printer
-	config, but not really empty
-	generated auto_install.cfg.pl can contain a somewhat empty printer
-	config, but not really empty
-
-	* standalone/XFdrake: factorize code in
-	ask_window_manager_to_logout_then_do()
-
-	* mdk-stage1/directory.c: fix using the mirror tree when there is an iso
-	at the root of the mirror but we don't use it (or can't use it)
-
-	* interactive.pm: ensure the "range" entry returned value is bounded as
-	asked
-	(useful for backends not handling "range" correctly, like
-	interactive::newt)
-	(bugzilla #13744)
-
-2005/02/18  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* detect_devices.pm: Detect XBox, don't probe for floppy on XBox.
-
-2005/02/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: prefer uim-qt for japanese under KDE
-
-	* share/po/ga.po: update
-
-2005/02/18  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Sync with Arabeyes CVS -> 100% Arabic translation :-)
-
-2005/02/17  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/17  Olivier Blin <oblin at mandrakesoft.com>
-
-	* Makefile: probe.c is located in c/
-
-	* network/shorewall.pm: definitively get rid off net_cnx scripts
-	add get_default_device
-	remove unneeded test
-	use network::shorewall::get_net_device
-	add and use network::shorewall::get_net_device
-
-	* network/netconnect.pm: titifix
-	perl_checker fix
-	remove unused network::netconnect::get_net_device
-
-	* standalone/drakconnect: fix typo
-	perl_checker fixes
-	don't use net_cnx_up anymore
-
-	* network/tools.pm: perl_checker fixes
-	revert some previous commit
-	net_cnx scripts shouldn't be used anywhere now
-	remove set_cnx_script
-	remove write_cnx_script
-
-	* standalone/drakvpn: perl_checker fixes
-	use network::shorewall::get_net_device
-
-	* drakxtools.spec: ship drakids in drakxtools
-	do not ship activefw.pm in drakxtools-backend but in drakxtools
-
-	* Makefile.drakxtools: move drakids in /usr/bin
-
-	* standalone/drakids: clear white list too
-
-	* standalone/net_applet: allow to enable automatic mode from popup
-	use only one 'edge' ButtonBox
-
-	* standalone/drakgw: perl_checker fixes
-	use network::shorewall::get_net_device
-	net_cnx scripts shouldn't be used anymore
-
-	* Makefile.config: ship drakids
-
-2005/02/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tg.po, share/po/ltg.po, share/po/nb.po, share/po/uz.po,
-	share/po/sk.po, share/po/ru.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/is.po, share/po/sl.po, share/po/nn.po, share/po/et.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/nl.po, share/po/it.po, share/po/uk.po,
-	share/po/eu.po, share/po/es.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/de.po, share/po/fi.po, share/po/he.po,
-	share/po/cy.po, share/po/da.po, share/po/cs.po, share/po/uz@Latn.po:
-	updated Slovenian file;
-	fixed various MandrakeSoft -> Mandrakesoft etc.
-
-2005/02/17  pjetur
-
-	* share/po/is.po: cleaning up more
-
-2005/02/17  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm: in case someone use diskdrake only to create
-	partitions, shut up the predefined mount point automatic choice
-
-	* detect_devices.pm, install_any.pm: 
-	  - create dmidecode_category()
-	  - don't use field {string} when not needed
-	  - better use regexps on dmidecode returned strings (even the kernel
-	use strstr)
-
-2005/02/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake: perl_checko cleanup
-
-	* standalone/keyboarddrake: simplify
-
-	* share/rpmsrate: only install gnome-volume-manager for KDE & GNOME
-	desktops
-	KDE uses gnome-volume-manager too
-	install cpufreqd on laptops w/o KDE (#13697)
-
-	* share/po/br.po: update
-
-2005/02/16  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: install nautilus-filesharing when installing nautilus
-	install desktop-printing when installing GNOME
-
-2005/02/16  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/16  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakids: use foreach (perl_checker)
-	fix whitelist display and unwhitelist call
-	use drakfirewall icon
-	handle Whitelist signal
-	handle whitelist
-	allow to sort blacklist by date, attacker or attack type
-
-	* standalone/net_applet: rename get_mode as get_interactive
-
-	* network/activefw.pm: rename get_mode as get_interactive
-	add generic call_method sub to factorize
-	typo fix
-	handle whitelist
-
-2005/02/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sl.po: updated Slovenian file
-	updated Slovenian file
-
-	* share/po/vi.po: updated Vietnamese file
-
-2005/02/16  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: More updates:)
-	minor update
-
-2005/02/16  Pixel  <pixel at mandrakesoft.com>
-
-	* patch/patch-updatemodules.pl: for the real 10_1, not the 10_1-update
-	branch
-
-2005/02/16  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - If a printer is set up with HPLIP and has still an old HPOJ
-	configuration,
-	it will be automatically removed now.
-
-2005/02/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: list usb mice that have not driver set as "Mouse:xxx"
-	in usbtable (#13575)
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/compssUsers.pl, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/mn.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/po/uz@Latn.po: typo fix (Per Oyvind Karlsen)
-
-	* standalone/keyboarddrake: better display of keyboard layouts by using a
-	tree (rationale: big
-	pull-down menu is slow to browse)
-
-	* share/rpmsrate: rollback
-	typo fix (Per Oyvind Karlsen)
-	include more EVMS packages
-
-	* drakxtools.spec: 10.2-0.27mdk
-
-	* share/po/br.po: typo fix (Per Oyvind Karlsen)
-	update
-	update
-	typo fixes
-
-2005/02/16  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic translation (sync with arabeyes CVS)
-
-2005/02/15  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakids: perl_checker fixes
-	delete unblacklisted entries from the list
-	handle Init signal (look again for daemon if received)
-	clear blacklist when needed
-	add quit button
-	initial import
-
-	* standalone/net_applet: fix typo again
-	fix typo
-	remove unneeded variable
-	use network::activefw;
-
-	* network/activefw.pm: allow to look for daemon after startup
-	add unblacklist
-	initial import
-
-2005/02/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: corrected encoding
-
-	* share/po/sr@Latn.po: fixed cyrillic mix
-
-	* share/po/th.po: small fix
-	small fix
-
-	* share/po/sl.po: updated Slovenian file
-
-2005/02/15  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: More updates again!:)
-	Even more fixes:)
-
-2005/02/15  Pixel  <pixel at mandrakesoft.com>
-
-	* mygtk2.pm: add FileChooser creation and rollback ugly ->run thing
-	(hopefully now unneeded)
-
-	* ugtk2.pm: _ask_dir and _ask_file now use FileChooser
-
-	* tools/cvslog2changelog.pl: fix typo
-
-	* install_steps_gtk.pm, diskdrake/interactive.pm, install_any.pm,
-	install_steps_interactive.pm: replace load/save from floppy with using
-	media_browser()
-
-	* interactive/gtk.pm, interactive.pm: create ->ask_filename and
-	->ask_directory to replace ->ask_file
-
-2005/02/15  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Fix bug 13661 : umounting a supplementary CD wasn't done
-	cleanly after failure
-
-	* install_steps_gtk.pm, pkgs.pm: Support media size check when copying
-	every rpm on HD
-
-2005/02/15  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Force only ASCII letters, numbers, and
-	underscores being used in print queue names.
-
-2005/02/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/id.po, share/po/ru.po,
-	share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po,
-	share/po/sl.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/be.po, share/po/mn.po, share/po/ko.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/he.po, share/po/lt.po,
-	share/po/ca.po, share/po/tg.po, share/po/uz.po, share/po/mk.po,
-	share/po/ro.po, share/po/is.po, share/po/af.po, share/po/hi.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/ta.po, share/po/sq.po,
-	share/po/sr@Latn.po, share/po/eo.po, share/po/bg.po, share/po/el.po,
-	share/po/lv.po: update
-
-2005/02/15  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/activefw.pm: initial import
-
-	* standalone/net_applet: remove unneeded variable
-	use network::activefw;
-
-2005/02/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/th.po: small fix
-	small fix
-	automerging
-
-	* share/po/nb.po: corrected encoding
-
-	* share/po/ltg.po, share/po/ky.po, share/po/uz.po, share/po/ms.po,
-	share/po/ro.po, share/po/fur.po, share/po/br.po, share/po/hr.po,
-	share/po/tr.po, share/po/ta.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/ga.po, share/po/be.po, share/po/mn.po, share/po/am.po,
-	share/po/ko.po, share/po/sr.po, share/po/lt.po, share/po/eo.po,
-	share/po/el.po, share/po/lv.po, share/po/uz@Latn.po: automerging
-
-2005/02/15  Per �yvind Karlsen <peroyvind at linux-mandrake.com>
-
-	* share/po/nb.po: Even more fixes:)
-
-2005/02/15  Pixel  <pixel at mandrakesoft.com>
-
-	* mygtk2.pm: add FileChooser creation and rollback ugly ->run thing
-	(hopefully now unneeded)
-
-	* install_steps_gtk.pm, diskdrake/interactive.pm, install_any.pm,
-	install_steps_interactive.pm: replace load/save from floppy with using
-	media_browser()
-
-	* ugtk2.pm: _ask_dir and _ask_file now use FileChooser
-
-	* tools/cvslog2changelog.pl: fix typo
-
-	* interactive/gtk.pm, interactive.pm: create ->ask_filename and
-	->ask_directory to replace ->ask_file
-
-2005/02/15  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm, pkgs.pm: Support media size check when copying
-	every rpm on HD
-
-2005/02/14  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: Modified font settings for zh_CN and zh_TW, 10pt would be fine
-	to New Sung
-	rather than 14pt.
-
-2005/02/14  peroyvind
-
-	* share/po/nb.po: Updates from Eskild Hustvedt:)
-
-2005/02/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (probeSerialDevices) simplify
-
-	* standalone/service_harddrake: better style
-
-2005/02/13  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po: updated Japanese file
-
-2005/02/13  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/monitor.pm: protect against bad depth (may occur on ppc?)
-
-2005/02/13  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-	* drakconf, DrakX
-
-2005/02/13  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: Allow HPLIP setup also when
-	setting up the print queue manually.
-
-2005/02/12  mbukovjan
-
-	* share/po/cs.po: Updated Czech translations
-
-2005/02/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po, share/po/DrakX.pot: updated Basque file
-
-	* share/po/cy.po: updated Welsh file
-
-2005/02/12  rstandtke
-
-	* share/po/de.po: some additions
-
-2005/02/11  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: GNOME is now using gnome-volume-manager instead of
-	magicdev
-	  -install GNOME software if GNOME AND KDE are selected at install
-	  -install gthumb instead of gqview
-	  -install sound-juicer and rhythmbox for sound and GNOME
-
-2005/02/11  fisher
-
-	* share/po/uk.po: translation update
-
-2005/02/11  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* tools/ddcprobe/Makefile: ppc fixes (danny)
-
-2005/02/11  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/11  mareklaane
-
-	* share/po/et.po: Updated and fixed translation.
-
-2005/02/11  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* lang.pm: Don't use the RPM_LANG_INSTALL environment variable anymore
-
-	* install_any.pm: Sort media names in recapitulative message
-
-2005/02/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake: fix removing a PCMCIA controller
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/advertising/10.pl, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/mn.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/cs.po, share/po/uz@Latn.po: fix CD-ROM acronym
-
-	* drakxtools.spec: 10.2-0.25mdk
-
-	* harddrake/sound.pm: align
-	add snd-hdspm & snd-indigo
-	add snd-emu10k1x
-
-	* pkgs.pm: do not favor perl-GTK
-
-	* modules.pm: add various/crypto category (support for hardware
-	accelerated crypto)
-	(write_preload_conf) preload padlock driver for VIA C3 that have RNG
-	(crypto hw) enabled
-
-2005/02/11  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic translation + a few fixes
-	Arabic translation
-
-2005/02/10  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2005/02/10  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fr.po: updated Slovenian file
-	updated French file
-
-	* share/po/sl.po: updated Slovenian file
-
-2005/02/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/list: include dmraid
-
-	* share/rpmsrate: install hotkeys even when KDE isn't selected
-
-	* docs/HACKING: add another required package (dmraid)
-
-	* detect_devices.pm (isTVcard) better style
-	(probeSerialDevices) really "install" serial modules
-
-2005/02/10  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Sync with arabic translation CVS
-
-2005/02/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fr.po: updated French file
-
-	* share/po/ja.po: updated Japanese file
-
-2005/02/10  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: 
-	  - Added help text for printers used with HPLIP.
-	  - Let "ask_warn()" messages not embed in the wizard, this breaks the
-	"Cancel" button (help texts when MF device queue is added).
-
-	* printer/printerdrake.pm: Tell that card reader is USB storage in the
-	HPLIP help text only if the device is actually connected via USB.
-	  - Added help text for printers used with HPLIP.
-	  - Let "ask_warn()" messages not embed in the wizard, this breaks the
-	"Cancel" button (help texts when MF device queue is added).
-
-2005/02/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (isTVcard) only look for drivers configurable by
-	drakxtv
-	(getTVcards) rely on "multimedia/tv" category
-	add various/serial category and thus add support for mice and modems
-	connected to multiport serial cards
-	add network/modem category, thus adding support for ACP (Mwave) modems
-
-	* network/netconnect.pm: fix ndiswrapper installing: always install it if
-	needed (btw run faster if
-	already installed)
-	fix stepping back from lan interface step (impossible when using
-	ndiswrapper
-	and when there's only one interface)
-	simplify ndiwrapper step chaining
-
-	* drakxtools.spec: typo fix in 10.2-0.24mdk's changelog
-	10.2-0.24mdk
-	fix 10.2-0.23mdk's changelog
-	10.2-0.23mdk
-
-	* modules.pm (write_preload_conf) typo fix
-	(write_preload_conf) rely on "multimedia/tv" category, thus managing
-	more TV cards
-	(write_preload_conf) minimal joystick support: preload proper modules
-	(though
-	only those on sound cards from Creative Labs and Fortemedia are
-	detectable by
-	pci_probe()...)
-	(write_preload_conf) simplify and support multiple different AGP
-	controllers
-	(though unprobable)
-	(write_preload_conf) minimal DVB support: preload proper modules
-	add various/laptop category (only toshiba is detectable by pci_probe()
-	though...)
-
-	* mygtk2.pm (main) fix FileSelection (inactive & unusable window)
-
-	* share/po/br.po: update
-
-	* standalone/drakxtv: do not complain about no tv cards when there're but
-	they do not
-	require any configuration beyond loading proper module (#7443, #11270
-	and the like)
-
-	* harddrake/data.pm: do not detect speakers as keyboards
-	rely on new "multimedia/webcam" category for detecting webcams
-
-2005/02/09  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_applet: perl_checker fixes
-
-2005/02/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/eu.po,
-	share/po/lv.po, share/po/hu.po, share/po/id.po, share/po/ru.po,
-	share/po/br.po, share/po/sl.po, share/po/nn.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/mn.po, share/po/uk.po,
-	share/po/am.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/fur.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/ta.po,
-	share/po/nl.po, share/po/de.po, share/po/tl.po, share/po/eo.po,
-	share/po/el.po, share/po/bg.po, share/po/cs.po, share/po/uz@Latn.po:
-	updated pot file
-
-	* share/po/sv.po, share/po/nb.po: updated pot file
-	updated Swedish and Norwegian files
-
-	* share/po/it.po: updated Italian file
-	updated pot file
-
-	* share/rpmsrate: Arabic-only fonts are useless for "fa" or "ur" locales
-
-	* share/po/fa.po: updated Persian file
-	updated pot file
-
-	* share/po/es.po: updated po file
-	updated pot file
-
-	* lang.pm: changed arabic font for KDE ("Roya" doesn't have ascii glyphs;
-	"Terafik" does)
-
-2005/02/09  peroyvind
-
-	* share/po/nb.po: * translate the word "daemon" to norwegian
-	* various corrections
-	updated
-
-2005/02/09  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: fix ugly typo (especially causing acpi to not be set in
-	drakboot --boot)
-
-2005/02/09  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* ugtk2.pm: Add the possibility to call a callback just after widget
-	initialisation in
-	ask_browse_tree_info_given_widgets().
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/sl.po, share/po/nn.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/mn.po, share/po/uk.po,
-	share/po/am.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/fur.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/fr.po, share/po/ta.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/tl.po, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/uz@Latn.po:
-	Make an error message more user-friendly
-
-	* install_any.pm: Make an error message more user-friendly
-	make perl_checko, the little bot, happy
-	Remove "Cancel" button from the supplementary media selection window
-
-2005/02/09  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Added automatic setup of HP printers with
-	HPLIP.
-
-	* printer/main.pm: Added reading the printing technology type in the HPLIP
-	model database.
-	Added automatic setup of HP printers with HPLIP.
-	Added subroutine to parse HPLIP device database XML file.
-
-2005/02/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* fs.pm (mount) let's support ntfs and reorder fs list btw (#3653)
-
-	* drakxtools.spec: 10.2-0.22mdk
-	10.2-0.21mdk
-	add bug reference in 10.1-14mdk's changelog
-
-	* standalone/service_harddrake: prevent adding spurious empty lines at end
-	of /etc/hotplub/blacklist on stop
-
-2005/02/08  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/08  mareklaane
-
-	* share/po/et.po: Menus and some more translation fixes.
-
-2005/02/08  Olivier Blin <oblin at mandrakesoft.com>
-
-	* drakxtools.spec: start automatically net_applet in fluxbox and XFce4 too
-
-2005/02/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fr.po: updated pot file
-	updated French file
-	updated pot file
-
-	* share/po/gl.po: updated pot file
-	updated pot file
-	updated pot file
-
-	* share/keyboards.tar.bz2, keyboard.pm: synchronized keyboards with X11;
-	added second bengali layout;
-	make Serbian cyrillic use Serbian latin (isntead of "us") for latin
-	layout
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/hr.po, share/po/be.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/he.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/ltg.po, share/po/nb.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/uk.po, share/po/mn.po, share/po/am.po,
-	share/po/lt.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/po/uz@Latn.po: updated pot file
-	updated pot file
-
-	* share/po/ja.po: updated pot file
-	updated pot file
-	updated Japanese file
-
-	* printer/printerdrake.pm: translatable string already in use
-
-	* standalone/drakbug: "%s" is not a translatable thing (changed N() ->
-	translate())
-
-	* share/po/cy.po: updated Welsh file
-	updated pot file
-	updated pot file
-
-2005/02/08  peroyvind
-
-	* share/po/nb.po: complete translation from Eskild:)
-
-2005/02/08  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: allow mounting isOtherAvailableFS filesystems read-only
-
-	* ugtk2.pm: {rwindow} is more probably a mygtk2::MagicWindow
-
-	* standalone/drakbug: cleanup this mess
-
-	* fs/format.pm: workaround perl limitation
-
-	* fs/type.pm: add iso9660 in isOtherAvailableFS
-	detect iso9660 filesystem
-
-	* fsedit.pm: when the partition table is empty, try to see if we are not
-	using the plain disk
-
-	* install2.pm, fs.pm, modules.pm, mdk-stage1/probing.c: new kernel doesn't
-	like usbdevfs any more, it wants usbfs
-
-2005/02/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm: Better wording for a couple of strings
-	Don't propose to copy RPMs on disk for ISO installation method
-
-	* any.pm: Allow upper case letters in users' real names.
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/sl.po, share/po/nn.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/mn.po, share/po/uk.po,
-	share/po/am.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/fur.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/ta.po,
-	share/po/nl.po, share/po/de.po, share/po/tl.po, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/uz@Latn.po:
-	Better wording for a couple of strings
-
-	* docs/HACKING: Add some more necessary RPMs
-
-2005/02/08  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Fixed (worked around?) bug of parallel HP MF devices
-	not being set up correctly with HPOJ (probably bad interaction with
-	udev).
-	  - Corrected recognition of driver name in Foomatic-generated PPDs.
-	  - Conserve auto-detection data when a Foomatic printer entry is
-	replaced by an
-	entry from a native PostScript PPD.
-
-	* printer/detect.pm: 
-	  - Prevented restarting of HPOJ and reloading the parallel port kernel
-	modules
-	when printerdrake's queue generator is called by the hotplug script.
-
-	* printer/printerdrake.pm: Updated device destinctions for HPOJ to the
-	newest models.
-	  - Prevented restarting of HPOJ and reloading the parallel port kernel
-	modules
-	when printerdrake's queue generator is called by the hotplug script.
-	Limited automatically generated print queue names to 12 characters and
-	warn user if he manually enters longer names. Names longer than 12
-	characters will make the printer unaccessible for certain Windows
-	clients (bug #12674).
-
-	* printer/data.pm: Added hplip-model-data package to be installed.
-
-2005/02/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-0.20mdk
-	10.1-27.5.101mdk
-
-2005/02/08  vljubovic
-
-	* share/po/bs.po: Update translation
-
-2005/02/07  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2005/02/07  mareklaane
-
-	* share/po/et.po: Some more translation fixes.
-	First round of translation fixes ended...
-
-2005/02/07  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: do not require perl-Gnome2-Gconf in drakxtools, but
-	use gconftool-2
-	make it easy to use other GConf interfaces
-
-	* network/adsl_consts.pm: add missing methods
-
-	* network/netconnect.pm: select manual adsl connection type if the network
-	interface was static
-
-2005/02/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/lv.po,
-	share/po/hu.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* share/po/wa.po: updated Walloon file
-	updated pot file
-
-	* share/po/zh_TW.po, share/po/fa.po: updated Farsi file
-	updated pot file
-
-2005/02/07  Pixel  <pixel at mandrakesoft.com>
-
-	* mygtk2.pm: 
-	  ->get('window-position') should be done on real_window
-
-	* install_steps_interactive.pm: really fix "Graphical interface - not
-	configured" bug
-
-	* fs/mount_options.pm: ensure some options are not set for
-	directories_needed_to_boot (bugzilla #13433)
-
-	* pkgs.pm: fix setting @hdlists when deselectionAllowed is false
-
-2005/02/07  shivahuang
-
-	* share/po/zh_TW.po: conflicts between 1.336 & 1.337 solved
-
-2005/02/07  Till Kamppeter  <till at mandrakesoft.com>
-
-	* share/rpmsrate: Updated rpmsrate for new printing packages
-
-	* standalone/printerdrake: Adjusted version number.
-
-	* printer/data.pm: Use "hplip-hpijs" for HPIJS package.
-
-2005/02/07  mareklaane
-
-	* share/po/et.po: More translation fixes.
-
-2005/02/07  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/mount_options.pm: ensure some options are not set for
-	directories_needed_to_boot (bugzilla #13433)
-
-	* pkgs.pm: fix setting @hdlists when deselectionAllowed is false
-
-2005/02/06  mareklaane
-
-	* share/po/et.po: More translation fixes.
-	More translation fixes.
-	Fixed translations.
-
-2005/02/06  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Adapted printerdrake to new printer drivers
-	packages.
-
-	* printer/data.pm: Added "hplip-hpijs-ppds" to be installed when
-	printerdrake is started.
-	Adapted printerdrake to new printer drivers packages.
-
-2005/02/05  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2005/02/05  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm, network/tools.pm: basic ndiswrapper support
-
-	* network/network.pm: remove useless message
-
-2005/02/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: changed LANGUAGE value for languages that will need renaming
-	in the future (ph->fil, ltg->LTG)
-
-2005/02/05  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: \w can match non-ascii characters, so expanding it (bugzilla
-	#13432). It would be better to remove accents, but i don't know how to
-	do it easily
-
-2005/02/05  Warly  <warly at mandrakesoft.com>
-
-	* install_any.pm: fix copy_rpms_on_disks
-
-2005/02/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: gnome proxy support in drakproxy
-
-	* network/netconnect.pm: handle bpalogin service
-	perl_checker fixes
-
-	* drakxtools.spec: 10.2-0.19mdk
-
-2005/02/04  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Better version to install urpmi with copied RPMs
-	Make install_urpmi work when having copied every RPM on disk
-
-2005/02/04  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: beta 10.2 logo
-
-2005/02/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: handle bpalogin service
-	perl_checker fixes
-	add bpalogin support for cable connections
-
-2005/02/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_TW.po, share/po/fr.po: updated French file; corrected syntax
-	errors in Chinese file
-
-	* share/po/vi.po: updated Vietnamese file
-
-2005/02/04  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Better version to install urpmi with copied RPMs
-	Make install_urpmi work when having copied every RPM on disk
-	call hdInstallPath only once
-	Remove a debug trace, and perl_checker fixes
-	Add support to copy all RPMs to the hard drive before installation.
-
-	* share/po/zh_TW.po: Fix zh_TW problem
-
-	* install_steps.pm, install_steps_gtk.pm, pkgs.pm,
-	install_steps_interactive.pm: Add support to copy all RPMs to the hard
-	drive before installation.
-
-	* diskdrake/interactive.pm: Untranslated string
-
-2005/02/04  shivahuang
-
-	* share/po/zh_TW.po: updated po file
-
-2005/02/04  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: beta 10.2 logo
-
-2005/02/03  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2005/02/03  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: CAT_X at Pixel's suggestion
-	Always install mozilla-firefox when NETWORKING_WWW is selected
-
-2005/02/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po: updated Japanese file
-
-2005/02/03  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/main.pm: in auto, $raw_X non empty is "ok"
-
-	* partition_table.pm: cleanup
-
-2005/02/03  rstandtke
-
-	* share/po/de.po: some additions
-
-2005/02/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-0.18mdk
-
-2005/02/03  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabnic translation
-
-2005/02/02  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/02/02  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/drakfirewall.pm: fix samba port range syntax
-
-	* network/isdn.pm: fix capi kernel drivers installation
-	fix capi kernel drivers installation
-
-2005/02/02  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/make_rescue_img, rescue/make_partimage_save_rest_all: add a basic
-	partimage save_all/rest_all feature
-
-2005/02/02  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/02/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: prefer beep-media-player over xmms
-
-2005/02/02  vljubovic
-
-	* share/po/bs.po: Updating Bosnian translation
-
-2005/02/02  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic translation
-
-2005/02/01  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Update
-
-2005/02/01  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2005/02/01  mareklaane
-
-	* share/po/et.po: Updated translation.
-
-2005/02/01  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/drakfirewall.pm: supplement previous half-fix
-	port 445 is used for Samba (without NetBios)
-	use new range syntax for smb
-
-2005/02/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/cy.po: updated Italian and Welsh files
-
-2005/02/01  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: check the given mount points
-
-	* loopback.pm, diskdrake/interactive.pm, fsedit.pm: $hd is now unused, no
-	need to pass it
-
-	* fs/type.pm: ensure isLVM() works on both the VG and the partitions
-	(isLVM() on a part was already used once in fsedit::check_mntpoint())
-
-	* lvm.pm: ensure {lv_name} is set for LVM partitions
-
-2005/02/01  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Restore a bunch of translation that have disappeared
-
-2005/02/01  tsdgeos
-
-	* share/po/ca.po: updates
-
-2005/02/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po, share/po/ga.po: update
-
-	* share/rpmsrate: like latest rxvt-CJK, rxvt-unicode works fine with SCIM
-	too, but is
-	multilingual too (unlike rxvt)
-	install rxvt-CJK with the same priority as rxvt
-
-2005/01/31  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/fr.po: updated French file
-	updated French file
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/po/eu.po: updated Basque file
-
-2005/01/31  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/modules.c, mdk-stage1/Makefile, rescue/make_rescue_img,
-	mdk-stage1/network.c, mdk-stage1/.cvsignore, mdk-stage1/network.h,
-	mdk-stage1/newt-frontend.c: add a dhcp-client built using mdk-stage1
-	code
-
-	* mdk-stage1/stage1.c: add a dhcp-client built using mdk-stage1 code
-	  - have nothing talking about interactive when SPAWN_INTERACTIVE is
-	unset
-	  - same for SPAWN_SHELL
-
-2005/01/30  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/lv.po,
-	share/po/hu.po, share/po/fa.po, share/po/id.po, share/po/ru.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: s/Disk/Hard Disk/.
-	from Harddrake
-
-	* share/po/zh_CN.po: s/Disk/Hard Disk/. from Harddrake
-	Updated Simplified Chinese translation
-
-	* harddrake/data.pm: s/Disk/Hard Disk/
-
-2005/01/30  mbukovjan
-
-	* share/po/cs.po: Updated Czech translations.
-
-2005/01/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-2005/01/29  mareklaane
-
-	* share/po/et.po: Small corrections (v�ljalasketeave -> info v�ljalaske
-	kohta + kasutaja �ige -> lisa kasutaja).
-
-2005/01/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/es.po: updated po file
-
-	* share/po/am.po: updated Amharic file
-
-	* share/po/it.po: updated Italian file
-
-2005/01/28  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/Makefile: only prompt for "Additional Drivers floppy" for
-	network
-
-	* fs.pm, fs/type.pm, fsedit.pm, fs/mount_options.pm: 
-	  - create fs::type::directories_needed_to_boot() and use it
-	  - for removable drives used for / /usr and the like, ensure we check
-	it at boot time
-	(bugzilla #13283)
-
-	* mdk-stage1/modules.c: only prompt for "Additional Drivers floppy" for
-	network
-	don't prompt if no modules, otherwise "Ok" in ask_from_list_comments()
-	gets a segfault
-
-	* mdk-stage1/stage1.c: ensure switching between different install methods
-	do not break due to IMAGE_LOCATION (/sysroot/tmp/image can be either
-	symlink or a directory)
-
-2005/01/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm (console_font_files) perl_checker cleanup
-
-	* share/po/pt_BR.po: typo fix (#12660)
-
-	* network/ethernet.pm (configure_eth_aliases) simplify
-
-	* drakxtools.spec: 
-	  - bump Glib/Gtk+2 requires
-	  - 10.2-0.17mdk
-
-	* standalone/service_harddrake: perl_checker cleanup
-	fix PCMCIA autoconfig in harddrake service
-	make --force force harddrake to eeconfigure everything
-
-2005/01/27  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - vincent danen patch (barely tested)
-
-2005/01/27  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	soft/control-center/po/da.po gi/perl-install/share/po/da.po
-	soft/drakstats/po/da.po
-
-2005/01/27  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/format.pm: remove log
-
-	* raid.pm: switch back to auto=yes :
-	> > the only problem with auto=yes is that it ignores the minor number
-	> > specified and always uses the first avaliable minor number, so you
-	might
-	> > find /dev/md2 with minor 0, /proc/mdstat will call it based on minor
-	> > number. This is going to get really confusing for users.
-	> > I was planning to fix this in upstream source, but i have not been
-	able
-	> > to find time to do it yet.
-	>
-	> ok, i fixed that in mdadm-1.8.0-2mdk
-	> there is a new option (auto=dev) that will create the device file with
-	> the correct minor number based on the device name.
-	> so please put auto=dev instead of auto=yes in the /etc/mdadm.conf
-	>
-	please hold the auto=dev change, the mdadm author feel this should be
-	the default behaviour for auto=yes, so i will upload a new
-	mdadm-1.9.0-0pre1.1mdk with fully working auto as soon as i return to
-	italy (this weekend i believe)
-	fix "mdadm package not installed" during install (bugzilla #13259)
-
-2005/01/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: typo fix
-
-2005/01/26  huftis
-
-	* share/po/nn.po: Updated Norwegian Nynorsk translation.
-
-2005/01/26  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table.pm: nicer description() (esp. when the size is 0)
-
-2005/01/26  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Wizard, System Backup configuration problems
-	(#13235)
-
-2005/01/26  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/01/26  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/card.pm: xorg_version is 6.8.2
-
-	* install2.pm: drakx_version() is now in install_any
-
-	* network/network.pm: fix (bugzilla #13197)
-
-	* partition_table.pm: nicer description() (esp. when the size is 0)
-
-	* mygtk2.pm: fix commented code :)
-	fix return value of method calls on MagicWindow
-	  ->size_request doesn't return anything on the box, it is better done
-	on the window (for rpmdrake)
-
-	* any.pm, install_any.pm: drakx_version() is now in install_any and use
-	getFile() to get VERSION
-
-2005/01/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 
-	  - move convert script from spec file into standalone/convert
-	  - btw, do not try converting if uneeded
-	10.2-0.16mdk
-
-	* standalone/convert, Makefile.drakxtools, Makefile: 
-	  - move convert script from spec file into standalone/convert
-	  - btw, do not try converting if uneeded
-
-2005/01/25  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* do_pkgs.pm, drakxtools.spec: Use the new --gui option to urpmi for the
-	drakxtools to ask for media
-	change; update the dependency of drakxtools on urpmi version
-	accordingly.
-	Remove dependency on gurpmi.
-
-2005/01/25  rstandtke
-
-	* share/po/de.po: some additions and fixes
-
-2005/01/25  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: fix previous commit (we don't want devfsd anymore)
-
-	* install_any.pm: fix rpmsrate_always_flags() not applied (bugzilla
-	#13177)
-
-	* fs/format.pm: even if it still takes some time when format is over, we
-	don't want the progress bar to stay at 85%
-
-2005/01/25  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Bugzilla 13138, 13139. (portmap check,
-	dhcpd.conf.pxe.include)
-
-2005/01/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-
-2005/01/24  mareklaane
-
-	* share/po/et.po: Updated translation.
-
-2005/01/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po: updated Japanese file
-
-	* share/po/it.po, share/po/cy.po: updated Welsh and Italian files
-
-2005/01/24  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/tree/etc/rc.sysinit: create /var/log
-
-2005/01/24  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/rpmsrate: Fix duplicate flag in rpmsrate
-
-2005/01/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: fix wrong package name
-
-2005/01/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-2005/01/23  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: removing code setting devfs=mount or devfs=nomount
-
-	* raid.pm: put the new option auto=dev instead of auto=yes (see
-	mdadm-1.8.0-2mdk)
-
-2005/01/22  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2005/01/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-	updated pot file
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-2005/01/22  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/draksplash, standalone/drakperm, diskdrake/hd_gtk.pm,
-	standalone/harddrake2, standalone/drakboot, standalone/printerdrake,
-	standalone/logdrake, standalone/draksec, standalone/drakfloppy,
-	standalone/drakfont, standalone/drakups: fix the various transient on
-	{rwindow} (or even {window} ?) not working anymore on the MagicWindow
-	(maybe the code could be simplified since it should now work even when
-	embedded (?))
-
-	* ugtk2.pm: allow using {real_window} instead of {rwindow}{real_window}
-	(esp. for set_transient_for for which we can't easily do some magic)
-
-2005/01/21  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/main.pm: fix check_valid()
-	  - rename Xconfig::main::is_valid() to Xconfig::main::check_valid() and
-	return the cause of the error
-	  - ensure an empty config file doesn't make it display "Your Xorg
-	configuration file is broken..."
-
-2005/01/21  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Drop quasi-pxe setup in dhcp.conf as we can use
-	real pxe now.
-	Perl_checker fixes.
-
-2005/01/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-0.15mdk
-
-2005/01/21  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/printerdrake: 
-	  - main loop fix
-	  - remove dead code
-	  - cleanups
-
-2005/01/21  Pixel  <pixel at mandrakesoft.com>
-
-	* raid.pm: 
-	  - don't write /etc/mdadm.conf when no raid
-	  - use option "auto=yes" in mdadm.conf to ensure mdadm will create
-	/dev/mdX devices when needed
-	(those are not there when using udev and neither kernel raid autostart
-	nor initrd created the raid)
-
-	* Xconfig/main.pm: fix check_valid()
-	  - rename Xconfig::main::is_valid() to Xconfig::main::check_valid() and
-	return the cause of the error
-	  - ensure an empty config file doesn't make it display "Your Xorg
-	configuration file is broken..."
-
-	* mygtk2.pm: do show_all on the real window (this is used by drakloop)
-
-	* keyboard.pm, standalone/keyboarddrake: minimal XkbModel support
-
-2005/01/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: tag devices as bridges later so that pcmcia
-	controllers got a chance
-	to be detected
-
-	* share/po/br.po: typo fixes
-	typo fixes
-
-	* standalone/printerdrake: fix subdialogs when embedded in mcc
-	fix banner's title by initializing mcc domain before ugtk2
-
-	* drakxtools.spec: 10.2-0.14mdk
-	10.2-0.13mdk
-
-	* network/adsl_consts.pm: updates from baud:
-	  - add "Czech Republic|Cesky Telecom"
-	  - add "Switzerland|Tiscali.ch"
-	  - add "Tunisia|Planet.tn"
-	  - add dns servers to "Israel|Bezeq"
-
-2005/01/21  Pixel  <pixel at mandrakesoft.com>
-
-	* raid.pm: 
-	  - don't write /etc/mdadm.conf when no raid
-	  - use option "auto=yes" in mdadm.conf to ensure mdadm will create
-	/dev/mdX devices when needed
-	(those are not there when using udev and neither kernel raid autostart
-	nor initrd created the raid)
-
-	* keyboard.pm, standalone/keyboarddrake: minimal XkbModel support
-
-2005/01/20  Pixel  <pixel at mandrakesoft.com>
-
-	* commands.pm: add lspcidrake
-
-	* network/shorewall.pm, network/ethernet.pm, standalone/drakconnect:
-	restore previous network::ethernet::get_eth_cards_names() behaviour
-	(i got hit by { map ... }; being a block and not a hash ref)
-
-	* rescue/dirs: not useful anymore (maybe others are unneeded too?)
-
-	* rescue/tree/etc/rc.sysinit: we want /mnt at the root of the rescue
-
-2005/01/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm: snd-azx was renamed as snd-hda-intel in ALSA's CVS,
-	so let's prepare
-	ground for future
-
-	* modules/interactive.pm (load_category__prompt_for_more)
-	  - fix missing help for SCSI
-	  - display it too for non SCSI disks that're handled as SCSI ones
-	(USB, Firewire, SATA, raid ...)
-	move SATA in its own category
-
-	* modules.pm (append_to_modules_loaded_at_startup_for_all_kernels)
-	introduce it
-	(wrapper around append_to_modules_loaded_at_startup())
-	move SATA in its own category
-
-	* install_any.pm (default_packages) simplify through
-	modules::append_to_modules_loaded_at_startup_for_all_kernels()
-	(default_packages) handle buggy laptops that're unusable without
-	laoding acerhk module
-
-	* install_steps.pm, install_steps_interactive.pm: move SATA in its own
-	category
-
-2005/01/19  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/drakconnect: adapt to new
-	network::ethernet::get_eth_cards_names() prototype
-
-	* standalone/keyboarddrake: use ->ask_from instead of ->ask_from_listf
-	(keeping the same GUI behaviour)
-
-2005/01/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm (switch) add hint for translator
-
-	* drakxtools.spec: 10.2-0.12mdk
-
-2005/01/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po, share/po/uz.po, share/po/am.po, share/po/uz@Latn.po:
-	updated Basque files;
-	corrected "<control>X" translations for non-latin keyboards
-
-	* share/po/gl.po: corrected "default:LTR" translation
-
-2005/01/18  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/rescue-gui.c: VERSION is now DISTRIB_VERSION
-
-	* mdk-stage1/Makefile: include gi/Makefile.config to have DISTRIB_DESCR
-	defined
-
-	* commands.pm: fix *old* typo
-
-	* mygtk2.pm: fix broken focus during install
-
-	* pkgs.pm: fix generating compssUsers.flat (was broken because of the
-	CAT_xxx switch)
-
-	* install_any.pm: auto_install compatibility: CAT_SYSTEM used to be
-	selected by default
-
-2005/01/18  Pixel  <pixel at mandrakesoft.com>
-
-	* install_any.pm: auto_install compatibility: CAT_SYSTEM used to be
-	selected by default
-
-2005/01/17  huftis
-
-	* share/po/nn.po: Updated translation.
-
-2005/01/17  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: fix backward compatibility
-
-2005/01/17  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Bugzilla 13056 - custom cron configuration
-	Bugzilla 13056 - custom cron setup
-
-2005/01/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: require dmidecode in -backend subpackage
-
-2005/01/16  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2005/01/16  huftis
-
-	* share/po/nn.po: Updated translation.
-
-2005/01/16  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo e jorge
-
-2005/01/16  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: if the window is not modal, the main
-	XFdrake window can block it :-(
-
-	* Xconfig/xfree.pm: don't be too picky on uppercase or lowercase sections
-
-	* mygtk2.pm: MagicWindow:
-	  - hide is done on the window if popped
-	  - show is done on both the window and the child
-	(to handle initial show on the window, and show after a hide on the
-	child)
-
-	* Xconfig/various.pm, install_steps.pm, install_any.pm: move setupFB() in
-	Xconfig, and do it when needed (including when standalone)
-
-	* bootloader.pm: fix syntax error
-	mapdrive should not bother same_entries()
-
-	* Xconfig/main.pm: when reading an existing X config file, ensure it is
-	not too bad, otherwise propose to start from scratch
-	(bugzilla #8548)
-	move setupFB() in Xconfig, and do it when needed (including when
-	standalone)
-	for Driver fbdev, rework to allow configuring vga= in bootloader and
-	telling to reboot instead of restarting X server (now i simply need to
-	configure bootloader in Xconfig::main::write() when need_reboot)
-
-	* install_steps_interactive.pm: for Driver fbdev, rework to allow
-	configuring vga= in bootloader and telling to reboot instead of
-	restarting X server (now i simply need to configure bootloader in
-	Xconfig::main::write() when need_reboot)
-
-	* standalone/XFdrake: make perl_checker happy
-	for Driver fbdev, rework to allow configuring vga= in bootloader and
-	telling to reboot instead of restarting X server (now i simply need to
-	configure bootloader in Xconfig::main::write() when need_reboot)
-
-	* Xconfig/card.pm: fix auto_install graphic card configuration (when one
-	specify the Driver)
-
-2005/01/15  huftis
-
-	* share/po/nn.po: Updated translation.
-
-2005/01/15  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm: change packing for the widgets given
-	  - move set_main_window_size() from ugtk2 to mygtk2
-	  - call it in MagicWindow creation
-	allow passing gtk widgets to ->wait_message
-
-	* mdk-stage1/Makefile, mdk-stage1/config-stage1.h, mdk-stage1/stage1.c,
-	rescue/tree/etc/issue, rescue/Makefile, rescue/make_rescue_img:
-	factorize the distrib version
-
-	* bootloader.pm: in read_grub(), setting {table} cause write_grub to
-	create a {mapdrive} even when we didn't have one (bugzilla #12307)
-
-	* mygtk2.pm: 
-	  - move set_main_window_size() from ugtk2 to mygtk2
-	  - call it in MagicWindow creation
-	fix using gtkset with text => ... on a Button
-
-	* ugtk2.pm: 
-	  - move set_main_window_size() from ugtk2 to mygtk2
-	  - call it in MagicWindow creation
-
-	* fs/format.pm: gtk2 progress bar when formatting ext3
-
-2005/01/14  huftis
-
-	* share/po/nn.po: More translation
-
-2005/01/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fr.po: updated po file
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/po/eo.po: updated Esperanto file
-
-2005/01/14  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm: this warning is stupid during install
-
-	* tools/hd_grub.cgi: fix typo
-
-	* detect_devices.pm: since dmidecode can fail to properly detect a floppy
-	drive, don't use it during install (where we don't care if it's a bit
-	slow)
-
-	* mygtk2.pm: create wrapper object mygtk2::MagicWindow which handles the
-	{rwindow} vs {window} duality
-
-	* interactive/gtk.pm: 
-	  - fix displaying wait_message
-	  - restore previous display of the wait_message during install (is that
-	better ?)
-
-	* ugtk2.pm: MagicWindow is now really magic, {rwindow} and {window} can be
-	the same thing :)
-
-	* authentication.pm: fix switching back nsswitch.conf to local
-	authentication (bugzilla #13024)
-
-2005/01/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: fix crash on opening help windows
-
-2005/01/13  huftis
-
-	* share/po/nn.po: Updated translation.
-
-2005/01/13  Pixel  <pixel at mandrakesoft.com>
-
-	* network/shorewall.pm: fix bugzilla #12996
-
-2005/01/12  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm: have separate SizeGroup's for advanced and non
-	advanced entries
-
-2005/01/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-0.11mdk
-
-2005/01/12  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: return the child when MagicWindow is using the $::WizardWindow
-	(otherwise the user of the MagicWindow can destroy the WizardWindow)
-
-	* mygtk2.pm: return the child when MagicWindow is using the
-	$::WizardWindow
-	(otherwise the user of the MagicWindow can destroy the WizardWindow)
-	  - fix gtkadd()
-	  - fix displaying banner
-	  - no banner if no ::Wizard_title (as used to be)
-
-	* interactive/gtk.pm: rewrite wait_messageW using mygtk2
-
-	* bootloader.pm: write in lilo.conf the global root= (bugzilla #12312)
-
-	* mdk-stage1/init.c: fix buggy blino commit which caused install failures
-	to cause reboot without prompting
-
-	* install_any.pm: we don't need the clp read-write (if it is read-only it
-	allows remounting /mnt ro)
-
-	* fs/format.pm: remove debug code
-
-	* any.pm: add user specific shell support in create_user (Nicolas Planel)
-
-	* mdk-stage1/stage1.c, Makefile: use /etc/init instead of /sbin/init to
-	allow umounting clp in init
-
-2005/01/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.2-0.11mdk
-	one more change in 10.2-0.10mdk
-	10.2-0.10mdk
-
-	* standalone/harddrake2: display the menubar and the banner when embedded
-
-	* standalone/printerdrake: show banner when embedded
-
-2005/01/11  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* any.pm: add user specific shell support in create_user
-
-2005/01/11  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: do not log the encrypted password
-	show advanced languages by default
-
-	* install_steps_gtk.pm: we always have force_focus when we have
-	!$::isStandalone,
-	so do it that way and get rid of $ugtk2::force_focus
-	remove $ugtk2::force_center_at_pos, inline it instead
-	revert bad commit
-	install_gtk::create_help_window is unused, removing it
-
-	* ugtk2.pm: create "MagicWindow" in mygtk2 out of ugtk2::new()
-	simplify away thing already done in %window_options
-	move ugtk2::create_window() to mygtk2::_create_Window()
-	change set_main_window_size() prototype
-	  - create mygtk2::main()
-	  - get rid of setting {destroyed}, use a local variable instead
-	simplify (no need to protect against double destroy anymore)
-	{window}->show is already done in ->new
-	better comment
-	the ugly gtkset_mousecursor_wait() done on destroy is not called often
-	nowadays, and not very useful either since the wait cursor is only on
-	the root window, and since install use isWizard, the root window is not
-	often seen. We should at least also set the wait cursor on the
-	$::WizardTable
-	fix typo
-	fix typo
-	  - $current_window can be local to ugtk2, so do it that way
-	  - create force_keyboard_focus()
-	better comments
-	we always have force_focus when we have !$::isStandalone,
-	so do it that way and get rid of $ugtk2::force_focus
-	remove $ugtk2::force_center_at_pos, inline it instead
-	no need to set widget name to Title (what was it used for?)
-	more consistent naming
-	help initial positioning of window during install (since position_policy
-	center-on-parent only works with a window manager, we can't get rid of
-	force_center_at_pos)
-	add comments
-
-	* mygtk2.pm: create "MagicWindow" in mygtk2 out of ugtk2::new()
-	mygtk2::_gtk() takes an hash ref to allow checking the resulting hash
-	move ugtk2::create_window() to mygtk2::_create_Window()
-	  - create mygtk2::main()
-	  - get rid of setting {destroyed}, use a local variable instead
-
-	* install_gtk.pm: cleanup
-	help size doesn't need anything special anymore
-	don't fake a ugtk2, use pure mygtk2 instead
-	don't fake a ugtk2, use pure mygtk2 instead
-	no need to set title to 'skip' (it was used by aewm-drakx)
-	install_gtk::create_help_window is unused, removing it
-
-	* interactive/gtk.pm: create "MagicWindow" in mygtk2 out of ugtk2::new()
-	change set_main_window_size() prototype
-
-	* Xconfig/test.pm: we always have force_focus when we have
-	!$::isStandalone,
-	so do it that way and get rid of $ugtk2::force_focus
-
-	* run_program.pm: do not log the encrypted password
-
-2005/01/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (dmidecode) do not rerun dmidecode on machines that do
-	not support it
-
-	* share/po/br.po: typo fix
-
-	* share/rpmsrate: do not install ivtv packages since it's already in the
-	kernel (it
-	wasn't in our pcitable due to the lack of MODULE_DEVICE_TABLE)
-	ivtv & zaptel dkms packages were renamed
-
-2005/01/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/gl.po: updated Galician file
-
-2005/01/10  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: move some now common things in _create_window()
-	more installing special install shortcuts in _create_window()
-	(there is no reason for not having the shortcuts when the window has
-	pop_it)
-	  - XFdrake test is not standalone, it is the non install nor standalone
-	state
-	(used when there is no window manager)
-	  - get rid of now unused $ugtk2::force_center
-	use {icon_no_error} instead of {icon}
-	rewrite
-	rewrite
-	the test is not useful, we can't get to this code when $::isEmbedded is
-	set
-	emove unused feature
-	$ugtk2::pop_it is unused
-
-	* Makefile: dont_run_directly_stage2 and trace_stage2 needs the live, not
-	the clp
-	  - add vera fonts (normal and bold)
-	  - generate fonts.dir and fonts.cache-1
-	  - take cursor.pcf.gz from system
-
-	* share/list: add /etc/fonts/fonts.conf
-
-	* share/fonts.tar.bz2: 
-	  - remove cursor.pcf.gz (now taken from system)
-	  - generate fonts.dir and fonts.cache-1
-
-	* lang.pm: 
-	  - add vera fonts (normal and bold)
-	  - generate fonts.dir and fonts.cache-1
-	  - take cursor.pcf.gz from system
-
-	* rescue/dirs: at least be able to mount /dev/pts if needed
-
-	* interactive/gtk.pm: simplify using {pop_it}
-
-	* rescue/list: rsync is useful too
-	add what Lord Packdrakeng.pm request
-	minimal ssh tools (alas it doesn't on console 1 because /dev/tty is
-	allocated properly, it needs fixing)
-
-	* Xconfig/test.pm: 
-	  - XFdrake test is not standalone, it is the non install nor standalone
-	state
-	(used when there is no window manager)
-	  - get rid of now unused $ugtk2::force_center
-
-	* share/rpmsrate: simplify
-
-	* rescue/tree/etc/inittab: use "mingetty --autologin" instead of calling
-	directly "bash --login", that
-	way the shell has a valid controlling terminal (CTTY, accessed via
-	/dev/tty).
-	This is needed for ssh to work
-
-	* rescue/tree/etc/rc.sysinit: have /dev rw (eg: for /dev/initctl)
-
-	* mygtk2.pm: create {icon_no_error}
-
-2005/01/10  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* do_pkgs.pm: Add --expect-install to the options passed to urpmi to
-	install packages, so
-	do_pkgs::install() can return 0 or true depending on whether some
-	packages were
-	actually installed.
-
-	* standalone/drakbackup: Don't use deprecated urpmi --X option
-
-	* standalone/drakTermServ: Silent install of terminal-server if needed
-	(--X is deprecated)
-
-	* drakxtools.spec: Require urpmi 4.6.11 (for --expect-install)
-
-2005/01/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: install zaptel packages if needed
-	install ivtv packages if needed
-
-2005/01/09  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2005/01/09  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2005/01/08  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-	* lang.pm: install scim-chewing if zh is selected by localedrake. Fix font
-	setting for zh_CN.
-
-2005/01/08  huftis
-
-	* share/po/nn.po: Updated translation.
-
-2005/01/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po: updated po file
-
-	* share/rpmsrate: new fonts-ttf-chinese package
-
-	* lang.pm: changed chinese font names
-
-2005/01/07  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/drakclock: simplify
-
-	* interactive/gtk.pm: $w->{isEmbedded} is unused
-	$w->{isWizard} is unused
-
-	* ugtk2.pm: $w->{isEmbedded} is unused
-	$w->{isWizard} is unused
-	$o->{force_center} is unused
-	no icon during install
-	simplify using mygtk2
-
-	* mygtk2.pm: add "Plug"
-
-2005/01/07  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* keyboard.pm: Make %lang2keyboard a global variable, so it can be
-	overriden in a
-	patch file
-
-2005/01/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/et.po: updated Welsh and Estonian files
-
-2005/01/06  Pixel  <pixel at mandrakesoft.com>
-
-	* network/shorewall.pm: cleanup unused variables
-
-	* mdk-stage1/doc/UPDATEMODULES: fix
-
-	* standalone/draksec, harddrake/sound.pm: remove unused variable
-
-	* interactive/gtk.pm: on a label, we must use ->get_text, not ->get
-
-	* install_gtk.pm: fix typo (thanks to perl_checker)
-	  - move some install specific code out of ugtk2.pm into install_gtk.pm
-	  - move some install specific code out of common.pm into install_any.pm
-
-	* ugtk2.pm: simplify
-	  - move some install specific code out of ugtk2.pm into install_gtk.pm
-	  - move some install specific code out of common.pm into install_any.pm
-	  - change _create_window() prototype to be more "mygtk2" like
-	  - use more mygtk2 properties
-	  - create and use wm_icon() (until all this crap is cleaned)
-	(drop $o->{wm_icon} which is unused)
-
-	* install2.pm, common.pm, install_any.pm: 
-	  - move some install specific code out of ugtk2.pm into install_gtk.pm
-	  - move some install specific code out of common.pm into install_any.pm
-
-	* mygtk2.pm: add {icon} for Window
-	merge Window and Dialog creation
-	allow setting padding for pack_start, but only globally (it works like
-	spacing, but also include spacing at beginning, and at end)
-	add {position_policy} for Window
-
-	* network/tools.pm: remove unused variables
-
-	* fs.pm, install_steps.pm: fs::formatMount_all() parameter wait_message is
-	no more optional (though you can give undef)
-
-	* loopback.pm, diskdrake/interactive.pm, install_steps_interactive.pm,
-	raid.pm, fs/format.pm: 
-	  - fs::format::part_raw() now takes $wait_message to allow displaying
-	the progress of format
-	  - create fs::format::wait_message() which creates a $wait_message
-	valid to give to fs::format::part
-	  - fs::format::mke2fs() format while parsing the output to display the
-	progress
-
-2005/01/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	update
-
-	* lang.pm: update UIM config for uim-0.4.5 (UTUMI Hirosi)
-
-	* drakxtools.spec: 10.2-0.9mdk
-
-2005/01/05  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	soft/urpmi/po/da.po soft/wizard_perl/po/da.po
-	gi/perl-install/share/po/da.po
-
-2005/01/05  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix selecting "other" keyboard when @best
-	<= 1
-	fix selecting "other" keyboard when @best <= 1
-	fix selecting "other" keyboard when @best <= 1
-
-	* fs.pm: part2wild_device_name('', $part) is better than
-	devices::make($part->{device}) (esp. for nfs "devices")
-	handle spaces in username
-
-	* fs/mount_options.pm: don't set fs_type to ext2:vfat for ext3 or reiserfs
-	/home coming from usb key (bugzilla #9827)
-
-	* network/smb.pm: handle spaces in username
-
-2005/01/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_any.pm (migrate_device_names) fix message
-
-	* share/rpmsrate: install echomixer if needed
-	switch default IM to scim-chewing for zh_TW
-
-	* harddrake/sound.pm: add a couple of new ALSA drivers (from CVS)
-
-	* drakxtools.spec: 10.2-0.8mdk
-
-2005/01/04  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: backport s/jp/ja/ fix from HEAD
-
-2005/01/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hr.po: updated Croatian file
-
-	* share/po/cy.po: updated Welsh file
-
-2005/01/04  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/list: ld-linux.so.2 is also needed on the rescue :)
-
-2005/01/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-2005/01/04  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/list: ld-linux.so.2 is also needed on the rescue :)
-
-	* mdk-stage1/init.c: ensure /tmp/syslog in stage2 contains the full log
-
-	* mdk-stage1/stage1.c: ensure /tmp/syslog in stage2 contains the full log
-	(currently stage2 init was writing in a file shadowed by stage2 copying
-	the /stage1/tmp/syslog over its file)
-
-2005/01/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: update ADSL ISPs list
-
-	* share/rpmsrate: install hotkeys in order to have working special keys on
-	internet/multimedia laptop keyboards
-
-2005/01/03  Pixel  <pixel at mandrakesoft.com>
-
-	* authentication.pm, steps.pm: "Administrator (root)" is more
-	user-friendly than "root"
-
-	* fs/mount_options.pm: remove codepage= option for fs types which don't
-	handle it (eg: ntfs)
-
-	* fs/type.pm: create can_be_one_of_those_fs_types()
-
-	* network/netconnect.pm, network/network.pm, network/ethernet.pm,
-	install_steps_interactive.pm, harddrake/data.pm: move and rename
-	network::ethernet::get_eth_categories() into
-	list_modules::ethernet_categories()
-	(it's closer to the definition of the categories)
-
-	* modules/interactive.pm: a somewhat nicer message when loading a module
-
-	* install_steps.pm: default security level is now 3
-
-2005/01/03  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* do_pkgs.pm: '--best-output' is no longer an urpmi option (and it's not
-	necessary
-	anyway since --auto is specified)
-
-	* install_steps.pm: Make do_pkgs::install() return the number of packages
-	actually installed
-	(used by printerdrake, apparently)
-
-2005/01/03  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Bugzilla 12861 - Directories with spaces
-	Mandrakeclub - Perms on tarballs too relaxed
-	perl_checker compliance
-	Bugzilla 12861 - Directories with spaces
-	Mandrakeclub - Perms too relaxed on tarballs
-	perl_checker compliance
-	Bugzilla 12861 - Directories with spaces
-	Mandrakeclub - Perms too relaxed on tarballs
-	perl_checker compliance
-
-2005/01/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_any.pm (migrate_device_names) try to be smarter with translators
-
-2005/01/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* keyboard.pm: 
-	  - enabled choice of various new keyboard layouts.
-	  - don't prepend "us," if there is already a list of layouts
-
-	* share/po/cy.po: updated Welsh file
-	updated pot file
-
-2005/01/03  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/tools.c: it's cleaner to have the clp_tmpfs in /tmp
-	(i think it was already that way for move and that i broke it, but who
-	knows?)
-
-	* install_any.pm: no clp is not an error
-	move mdkinst.clp on hard drive ASAP
-	=> allows multi-cd installs even if the mdkinst.clp was not preloaded
-	=> allows to better memory handling during pkgs install (hopefully at
-	least)
-
-	* fs/mount_options.pm: remove codepage= option for fs types which don't
-	handle it (eg: ntfs)
-
-	* fs/type.pm: create can_be_one_of_those_fs_types()
-
-	* devices.pm, install2.pm: move mdkinst.clp on hard drive ASAP
-	=> allows multi-cd installs even if the mdkinst.clp was not preloaded
-	=> allows to better memory handling during pkgs install (hopefully at
-	least)
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: ensure /tmp/syslog in stage2
-	contains the full log
-	(currently stage2 init was writing in a file shadowed by stage2 copying
-	the /stage1/tmp/syslog over its file)
-
-2005/01/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm: add another sparc sound driver
-
-2005/01/03  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: s/jp/ja. Corrected spelling of locale ja
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/12/31  Pixel  <pixel at mandrakesoft.com>
-
-	* mygtk2.pm: no need to have things twice in _icon_paths()
-
-	* install_steps_gtk.pm: simplify (thanks to perl_checker)
-	remove code using getAndSaveFile to get the X server
-	(we don't have live directory anymore, and anyway we only use one X
-	server)
-
-	* install_gtk.pm: simplify (we always want the logo, and looking the right
-	path is already done elsewhere)
-
-	* share/list: ldd doesn't say anymore which file ld-linux is, so adding it
-	explicitly
-
-	* interactive/gtk.pm: better layout:
-	  - ensure buttons are at bottom using pack_end instead of packing a
-	growing empty vbox for ask_warn-like dialogs
-	  - drop old code
-	  - always allow box to grow (this may be wrong)
-
-2004/12/31  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_gtk.pm: simplify (thanks to perl_checker)
-	remove code using getAndSaveFile to get the X server
-	(we don't have live directory anymore, and anyway we only use one X
-	server)
-
-	* interactive/gtk.pm: better layout:
-	  - ensure buttons are at bottom using pack_end instead of packing a
-	growing empty vbox for ask_warn-like dialogs
-	  - drop old code
-	  - always allow box to grow (this may be wrong)
-
-2004/12/30  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: more spacing around the separator and the buttons (as
-	requested by ergonomy team)
-
-	* install_steps.pm: finish backporting HEAD changes for finish-install
-	(any::write_passwd_user() doesn't exist anymore)
-
-2004/12/29  Pixel  <pixel at mandrakesoft.com>
-
-	* lvm.pm, devices.pm: move device mapper initialisation out of lvm.pm into
-	devices.pm (since it will be useful for other things)
-
-	* install_steps_interactive.pm: when computing group size, select
-	CAT_SYSTEM packages
-
-	* pkgs.pm: simplify and speed up computeGroupSize()
-	in computeGroupSize()
-	  - fix old ugly bug (CAT_FOO && CAT_BAR || CAT_FOO  was reduced to
-	CAT_FOO && CAT_BAR)
-	  - log the time spent
-	  - ignore already selected packages
-	  - group by same rpmsrate flags (nice speedup :)
-
-2004/12/28  Pixel  <pixel at mandrakesoft.com>
-
-	* install_gtk.pm: fix overlap
-	re-organize steps display as requested by ergonomic team
-
-	* install_steps_gtk.pm: fix displaying package tree (was empty since
-	moving from XXX to CAT_XXX)
-
-	* mygtk2.pm: 
-	  - add can_default
-	  - remove known_opts (alike the rest of the code)
-
-	* pkgs.pm, install_any.pm, install_steps_interactive.pm: 
-	  - create set_rpmsrate_category_flags(),
-	set_rpmsrate_default_category_flags(), default_packages(),
-	rpmsrate_always_flags() replacing setDefaultPackages()
-	  - create select_default_packages()
-	  - apply "always" rpmsrate flags ASAP and skip packages with flag
-	"FALSE" in computeGroupSize()
-	=> 30% speed-up
-
-2004/12/24  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate, install_any.pm, install_steps_interactive.pm:
-	differentiate compssUsers flags from non-user modifiable flags (eg:
-	hardware flags)
-
-	* network/drakfirewall.pm: "Samba server" is better named "Windows Files
-	Sharing (SMB)" (bugzilla #10585)
-
-2004/12/23  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/XFdrake: fix Xconfig::default::configure() use
-	"XFdrake --auto" is now fully auto using auto_install configuration
-	instead of "as much auto as can be"
-	  - don't ask X to restart in auto mode
-	  - set exit status to 1 when configuration failed (esp. auto mode)
-
-2004/12/23  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* tools/checkusedmodules: Add a new check script in tools. It compares the
-	perl modules used by the .pm
-	files in perl-install against the ones listed in share/list, to detect
-	potential missing modules (and potential run-time problems during the
-	stage 2)
-
-2004/12/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: bump require on perl in order to prevent beakage on
-	update due to
-	binary incompatibility (#12719 and the like)
-	fix typo in 10.2-0.7mdk's changelog
-	10.2-0.7mdk
-
-2004/12/22  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: simplify
-	fix previous commit
-	create read_rpmsrate_raw() out of read_rpmsrate(), this new function can
-	be easily used outside install
-
-	* install_steps_interactive.pm: no need to use max_size, no need to
-	compute it
-
-	* install2.pm, fsedit.pm: add option no_bad_drives (to workaround bugzilla
-	#12766)
-
-2004/12/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm: "snd-audigyls" ALSA driver was renamed "snd-ca0106"
-	in ALSA CVS;
-	let's have our tools be aware of that once our kernel got synced
-	handle new snd-pcxhr driver from alsa CVS
-
-	* share/rpmsrate: install proper tools for Digigram PCXHR sound card
-
-2004/12/21  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: /proc/sys/kernel/modprobe wants something non empty,
-	otherwise it doesn't change anything
-
-	* install_any.pm: don't pass prefix, use $::prefix
-	don't pass prefix to network::netconnect::main() (it doesn't use it)
-	don't pass prefix, use $::prefix
-
-	* fs.pm: 
-	  - fs::mount() wants a real device or a faked one, but doesn't accept
-	things like fd0 anymore (give it /dev/fd0)
-	  - a little more robust analyze_wild_device_name() during install
-	  - handle bad things in subpart_from_wild_device_name()
-
-	* install_steps_interactive.pm: don't pass prefix, use $::prefix
-	don't pass prefix to network::netconnect::main() (it doesn't use it)
-
-	* mdk-stage1/doc/UPDATEMODULES: much simpler code to handle post-install
-	update modules
-	  - it handles new modules
-	  - it calls depmod
-
-	* install_steps_gtk.pm, commands, standalone/drakbug_report, pkgs.pm,
-	crypto.pm, commands.pm: don't pass prefix, use $::prefix
-
-	* standalone/drakconnect, network/netconnect.pm, printer/printerdrake.pm:
-	don't pass prefix to network::netconnect::main() (it doesn't use it)
-
-	* any.pm: 
-	  - fs::mount() wants a real device or a faked one, but doesn't accept
-	things like fd0 anymore (give it /dev/fd0)
-	  - a little more robust analyze_wild_device_name() during install
-	  - handle bad things in subpart_from_wild_device_name()
-	don't pass prefix, use $::prefix
-
-	* install_steps.pm: 
-	  - fs::mount() wants a real device or a faked one, but doesn't accept
-	things like fd0 anymore (give it /dev/fd0)
-	  - a little more robust analyze_wild_device_name() during install
-	  - handle bad things in subpart_from_wild_device_name()
-	don't pass prefix, use $::prefix
-	don't pass prefix, use $::prefix
-	much simpler code to handle post-install update modules
-	  - it handles new modules
-	  - it calls depmod
-
-	* detect_devices.pm: fix floppies detection (through dmidecode)
-
-2004/12/20  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: don't die when /proc/sys/kernel/modprobe doesn't exist (for
-	BOOT kernels)
-
-	* mdk-stage1/tools.c, mdk-stage1/tools.h, mdk-stage1/automatic.c: minimal
-	bootsplash stage1 support
-	create unset_automatic()
-
-	* mdk-stage1/modules.c, mdk-stage1/cdrom.c, mdk-stage1/stage1.c,
-	mdk-stage1/network.c: create unset_automatic()
-
-	* mdk-stage1/Makefile, mdk-stage1/bootsplash.h, mdk-stage1/bootsplash.c,
-	mdk-stage1/frontend.h, mdk-stage1/stdio-frontend.c,
-	mdk-stage1/newt-frontend.c: minimal bootsplash stage1 support
-
-2004/12/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/modem.pm (get_user_home) do not horribly die if USER environment
-	variable list
-	a non existing user
-
-2004/12/19  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: jp console should not be localized
-	jp console should not be localized
-
-2004/12/18  rstandtke
-
-	* share/po/de.po: added some translations
-
-2004/12/17  Pixel  <pixel at mandrakesoft.com>
-
-	* install_gtk.pm: don't parse the theme rc file to set the root window
-	background color during install,
-	instead use the gc of a fake window named "background"
-	switch to mygtk2
-
-	* ugtk2.pm: add some more functions in mygtk2
-
-	* Xconfig/test.pm: remove unused code
-
-	* modules.pm: packdrake changed a little, ensuring that if we ask no
-	modules it doesn't cause havoc
-
-	* mygtk2.pm: don't parse the theme rc file to set the root window
-	background color during install,
-	instead use the gc of a fake window named "background"
-	oops, set_background *is* needed
-	remove unneeded ->set_background
-	add some more functions in mygtk2
-
-	* bootloader.pm: ia64 uses the lilo method (even if it has some important
-	differences)
-	on ia64, use method lilo
-
-2004/12/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: fix NETMASK autofilling
-
-2004/12/16  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* c/smp.c: merge smp detection from fedora/ydl
-
-2004/12/16  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: help testing
-
-	* mygtk2.pm: 
-	  - add DrawingArea
-	  - add text_ref & format for buttons
-	remove debug code
-	we must allow more than one callback per ref & widget
-	add option allow_unknown_options for easy compatibility
-
-	* detect_devices.pm, pkgs.pm, install_any.pm: create function
-	detect_devices::BIGMEM() which calls c::dmiDetectMemory(), but only
-	if we are root (this helps testings install without dying)
-
-	* install_steps_gtk.pm: migrate to mygtk2
-
-	* ugtk2.pm: fix typo (mygtk2 wants active_ref, not val)
-	add option allow_unknown_options for easy compatibility
-
-	* Xconfig/resolution_and_depth.pm: much simpler code using mygtk2
-
-2004/12/15  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* mdk-stage1/insmod-modutils/include/util.h,
-	mdk-stage1/insmod-modutils/util/logger.c: rename log to do_log in order
-	to avoid clashes with builtins
-
-	* mdk-stage1/dietlibc/ia64/start.S, mdk-stage1/dietlibc/ia64/fork.S,
-	mdk-stage1/dietlibc/ia64/pipe.S: ia64 fixes: fork, pipe, syscall weak
-	symnames
-
-	* mdk-stage1/insmod-modutils/include/elf_ppc64.h,
-	mdk-stage1/insmod-modutils/obj/obj_ppc64.c: merge ppc64 support from
-	modutils 2.4.26
-
-	* mdk-stage1/insmod-modutils/obj/obj_gpl_license.c: add missing file from
-	older merge from modutils 2.4.26
-
-	* mdk-stage1/dietlibc/ia64/syscalls.h: add ia64 setjmp/longjmp from glibc
-	ia64 fixes: fork, pipe, syscall weak symnames
-
-	* tools/ddcprobe/Makefile: ppc & ppc64 fixes
-	ppc64 support
-
-	* mdk-stage1/insmod-modutils/obj/obj_kallsyms.c: fix build to expose
-	assignments better
-
-	* mdk-stage1/insmod-modutils/obj/obj_ia64.c: add support for
-	R_IA64_PCREL60B reloc
-	build fix
-
-	* tools/ddcprobe/ddcxinfos.c: ppc & ppc64 fixes
-	sounds like the (empty) line is expected
-
-	* mdk-stage1/insmod-modutils/util/sys_oim.c,
-	mdk-stage1/insmod-modutils/insmod.c,
-	mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/insmod-modutils/util/modstat.c: drop support for kernel 2.0
-
-	* tools/ddcprobe/vbe.h: ppc & ppc64 fixes
-	fix on big endian platforms (ppc, ppc64)
-
-	* mdk-stage1/dietlibc/ia64/__longjmp.S, mdk-stage1/dietlibc/ia64/setjmp.S:
-	add ia64 setjmp/longjmp from glibc
-
-	* mdk-stage1/rescue-gui.c, mdk-stage1/init.c: lib64 fixes on ppc64
-
-	* mdk-stage1/dietlibc/include/elf.h: ia64 elf definitions
-
-	* tools/ddcprobe/of.c: ppc & ppc64 fixes
-	On PowerPC platforms, byteswap product_code so that ids match MonitorsDB
-	contents
-
-2004/12/15  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/network.c: fix http directory not starting with a "/" (it was
-	handled for stage1, but not for URLPREFIX given to stage2)
-
-2004/12/15  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: perl_checker, suggestions from Pixel, rework
-	buttons in main GUI
-
-2004/12/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update (stef, neoclust)
-
-	* drakxtools.spec: 10.2-0.6mdk
-
-2004/12/15  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate.corpo-server, share/rpmsrate.corpo-desktop: remove
-	mdkonline-backend
-
-2004/12/14  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/termios.h, mdk-stage1/dietlibc/diet.c,
-	mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/include/sys/stat.h,
-	mdk-stage1/dietlibc/include/sys/ucontext.h,
-	mdk-stage1/dietlibc/include/sys/shm.h,
-	mdk-stage1/dietlibc/include/fcntl.h,
-	mdk-stage1/dietlibc/include/sys/mman.h,
-	mdk-stage1/dietlibc/include/asm/sigcontext.h,
-	mdk-stage1/dietlibc/include/elf.h,
-	mdk-stage1/dietlibc/include/sys/ioctl.h,
-	mdk-stage1/dietlibc/include/sys/types.h, mdk-stage1/dietlibc/Makefile,
-	mdk-stage1/dietlibc/include/endian.h,
-	mdk-stage1/dietlibc/include/sys/ptrace.h,
-	mdk-stage1/dietlibc/include/signal.h: ppc64 port
-
-	* mdk-stage1/dietlibc/include/setjmp.h: fix setjmp.h (JB_SIZE) on ppc64
-	ppc64 port
-
-2004/12/14  Pixel  <pixel at mandrakesoft.com>
-
-	* drakxtools.spec: fix release (keep 101mdk for 10.1 packages)
-
-	* network/netconnect.pm: for drakx-finish-install, we want drakconnect to
-	restart network
-	for drakx-finish-install, we want drakconnect to restart network
-
-	* mygtk2.pm: export gtkval_register() and gtkval_modify()
-
-	* mdk-stage1/pcmcia_/merge_from_pcitable: cleanup
-
-2004/12/13  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	soft/drakpxelinux/po/da.po soft/rpmdrake/po/da.po
-	soft/urpmi/po/da.po gi/perl-install/share/po/da.po
-
-2004/12/13  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: fix
-
-	* drakxtools.spec: introduce in CVS 27.2.101mdk which was using a patch on
-	drakbug
-
-	* standalone/drakbug: commit vdanen patch which makes drakbug send
-	everything to bugzilla (instead of anthill)
-
-2004/12/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/list: Add a gazillion modules required by the new packdrake for
-	now
-
-2004/12/13  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: fix
-
-	* drakxtools.spec: introduce in CVS 27.2.101mdk which was using a patch on
-	drakbug
-
-	* standalone/drakbug: commit vdanen patch which makes drakbug send
-	everything to bugzilla (instead of anthill)
-
-2004/12/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/list: Add a gazillion modules required by the new packdrake for
-	now
-	Add the subset of POSIX.pm needed by the new packdrake
-
-2004/12/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/autoconf.pm: 
-	  - rename/move install_any::write_pcmcia() as
-	harddrake::autoconf::pcmcia() so
-	that it became availlable for standalone tools
-	  - reuse it in harddrake service in order to configure PCMCIA cards
-
-	* harddrake/data.pm (pcmcia_controller_probe) move some harddrake code
-	there
-
-	* detect_devices.pm: better english (writing style rather than spoken one)
-	(pcmcia_controller_probe) reuse pcmcia_controller_probe(), thus fixing
-	installer not handling anymore PCMCIA controllers managed by driver
-	other than
-	yenta_socket...
-	this is still not enough for stage1 though (since
-	mdk-stage1/pcmcia_/probe.c::pcmcia_probe() isn't aware of all PCMCIA
-	host
-	controller drivers that're known to list_modules.pm)
-	(pcmcia_controller_probe) move some harddrake code there
-
-	* Xconfig/card.pm, share/po/ms.po, share/po/pt_BR.po, share/po/et.po,
-	share/po/ja.po, install_steps_interactive.pm, standalone/drakvpn,
-	printer/data.pm, standalone/drakboot, standalone.pm,
-	standalone/drakTermServ, share/po/sv.po, share/po/sr.po, share/po/fi.po,
-	fs/type.pm, standalone/drakbackup, share/po/ca.po, share/po/ltg.po,
-	share/po/uz.po, partition_table/mac.pm, diskdrake/interactive.pm,
-	standalone/fileshareset, share/po/ro.po, standalone/drakroam,
-	authentication.pm, share/po/zh_TW.po, share/po/eu.po, share/po/es.po,
-	network/adsl.pm, modules.pm, network/tools.pm,
-	standalone/service_harddrake.sh, standalone/drakupdate_fstab,
-	share/po/lv.po, share/po/id.po, help.pm, share/po/br.po, install_gtk.pm,
-	network/isdn.pm, share/po/mt.po, share/po/ga.po, modules/parameters.pm,
-	share/po/uk.po, install2.pm, share/po/lt.po, resize_fat/boot_sector.pm,
-	commands.pm, network/test.pm, install_interactive.pm, share/po/tg.po,
-	share/advertising/12.pl, loopback.pm, mygtk2.pm, interactive/http.pm,
-	ftp.pm, interactive/stdio.pm, share/po/mk.po, share/po/fur.po,
-	services.pm, harddrake/sound.pm, fs.pm, standalone/drakfont,
-	share/po/af.po, network/ethernet.pm, standalone/net_applet,
-	bootloader.pm, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	keyboard.pm, standalone/drakperm, share/advertising/05.pl,
-	share/po/tl.po, share/po/de.po, common.pm, share/po/el.po,
-	share/po/bg.po, share/po/uz@Latn.po, network/network.pm, share/po/bn.po,
-	standalone/logdrake, share/po/gl.po, share/po/sk.po, share/po/th.po,
-	Xconfig/parse.pm, interactive.pm, share/po/hr.po, resize_fat/fat.pm,
-	network/netconnect.pm, share/po/be.po, do_pkgs.pm, mouse.pm,
-	network/smb.pm, share/po/DrakX.pot, share/po/ko.po, share/po/pl.po,
-	share/po/he.po, raid.pm, fs/format.pm, diskdrake/smbnfs_gtk.pm,
-	share/po/da.po, share/po/ar.po, partition_table.pm, unused/dns.pm,
-	share/po/ky.po, share/po/nb.po, pkgs.pm, run_program.pm,
-	standalone/drakconnect, share/po/zh_CN.po, share/po/sq.po,
-	share/po/sr@Latn.po, share/po/it.po, printer/printerdrake.pm,
-	share/po/hu.po, http.pm, share/po/fa.po, network/modem.pm,
-	resize_fat/main.pm, network/ipsec.pm, share/po/ru.po, share/po/sl.po,
-	standalone/drakautoinst, c.pm, share/po/nn.po, share/po/tr.po,
-	partition_table/gpt.pm, share/po/mn.po, share/po/am.po, lang.pm,
-	devices.pm, harddrake/v4l.pm, share/po/cy.po, partition_table/raw.pm,
-	ugtk2.pm, any.pm, install_steps_gtk.pm, printer/main.pm, share/po/bs.po,
-	interactive/newt.pm, share/po/wa.po, fs/mount_options.pm,
-	share/po/is.po, share/po/hi.po, share/po/az.po, Xconfig/xfree.pm,
-	share/po/ta.po, standalone/drakgw, share/po/nl.po, fsedit.pm,
-	share/po/eo.po, share/po/cs.po, standalone/bootloader-config: better
-	english (writing style rather than spoken one)
-
-	* install_any.pm, install_steps.pm, standalone/service_harddrake: better
-	english (writing style rather than spoken one)
-	  - rename/move install_any::write_pcmcia() as
-	harddrake::autoconf::pcmcia() so
-	that it became availlable for standalone tools
-	  - reuse it in harddrake service in order to configure PCMCIA cards
-
-2004/12/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/list: Add new packdrake module
-
-2004/12/12  Pixel  <pixel at mandrakesoft.com>
-
-	* .perl_checker: ignore packdrake for now
-
-	* install_gtk.pm, share/list.i386: keyboard_drv.o is needed by Xorg, and
-	driver must "keyboard", not "Keyboard"
-
-2004/12/12  Pixel  <pixel at mandrakesoft.com>
-
-	* .perl_checker: ignore packdrake for now
-
-	* install_gtk.pm, share/list.i386: keyboard_drv.o is needed by Xorg, and
-	driver must "keyboard", not "Keyboard"
-
-2004/12/10  Pixel  <pixel at mandrakesoft.com>
-
-	* Makefile: move drakx VERSION file in install/stage2 (used by bugzilla)
-
-2004/12/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ja.po: update (Yukiko Bando)
-
-2004/12/09  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: commit warly's fix in HEAD
-	commit warly's fix in 10.1 branch
-
-2004/12/08  Warly  <warly at mandrakesoft.com>
-
-	* install_steps.pm: fix the updatemodules mode for installation
-
-2004/12/07  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm, install_steps_interactive.pm: look for yenta_socket
-	in pci_probe too (nb: ldetect pci_probe has a special rule for it, not
-	simply pcitable)
-	look for yenta_socket in pci_probe too
-	look for yenta_socket in pci_probe too (nb: ldetect pci_probe has a
-	special rule for it, not simply pcitable)
-
-	* share/rpmsrate: xcdroast only if X is chosen (bugzilla #12594)
-
-2004/12/06  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate.corpo-server, share/rpmsrate.corpo-desktop: Added
-	mdkonline, slmodem and ipw2?00
-
-2004/12/05  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/12/05  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/format.pm, install_any.pm: don't allow partition types we don't know
-	how to format in {partitions} for auto_installs (eg of bad type: ntfs)
-
-2004/12/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: typo fixes (#12580)
-
-2004/12/04  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/merge_from_pcitable: simplify
-
-2004/12/04  tsdgeos
-
-	* share/po/ca.po: Update
-
-2004/12/03  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: disable kmod, otherwise we get a different behaviour in
-	kernel vs kernel-BOOT
-
-	* Makefile: use the cute "perldoc -l" instead of perl -V:vendorlib which
-	doesn't work when the module hasn't been rebuilt
-
-	* unused/migrate-ugtk2-to-mygtk2.pl, unused/migrate-ugtk2-to-mygtk2.el: be
-	more automatic and less .emacs dependent
-
-	* tools/Makefile: use perldoc -l instead of perl -M + %INC
-
-	* install_steps_gtk.pm: more debug log
-
-	* commands: during install, commands should $::isInstall set (otherwise
-	poor modprobe becomes a fork bomb)
-
-2004/12/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/be.po,
-	share/po/mn.po, share/po/am.po, share/po/ko.po, share/po/sr.po,
-	share/po/lt.po, share/po/he.po, share/po/cy.po, share/po/ca.po,
-	share/po/ar.po, share/po/ltg.po, share/po/ky.po, share/po/mk.po,
-	share/po/ro.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/vi.po, share/po/sq.po, share/po/sr@Latn.po,
-	share/po/tl.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po: rescued some strings
-
-2004/12/03  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: disable kmod, otherwise we get a different behaviour in
-	kernel vs kernel-BOOT
-
-	* Makefile: use the cute "perldoc -l" instead of perl -V:vendorlib which
-	doesn't work when the module hasn't been rebuilt
-
-	* unused/migrate-ugtk2-to-mygtk2.pl, unused/migrate-ugtk2-to-mygtk2.el: be
-	more automatic and less .emacs dependent
-
-	* tools/Makefile: use perldoc -l instead of perl -M + %INC
-
-	* install_steps_gtk.pm: more debug log
-
-	* commands: during install, commands should $::isInstall set (otherwise
-	poor modprobe becomes a fork bomb)
-
-2004/12/02  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: use migrate-ugtk2-to-mygtk2.pl (and i verified the diff)
-
-	* unused/migrate-ugtk2-to-mygtk2.pl: replace "policy => [ horizpolicy,
-	vertpolicy ]" with "h_policy => ..., v_policy => ..."
-	(both defaulting to "automatic")
-	dirty script easing the switch from ugtk2 to mygtk2 (beware!)
-
-	* unused/migrate-ugtk2-to-mygtk2.el: dirty script easing the switch from
-	ugtk2 to mygtk2 (beware!)
-
-	* rescue/make_rescue_img: fix typo and perl_checker compliance
-
-	* mygtk2.pm: replace "policy => [ horizpolicy, vertpolicy ]" with
-	"h_policy => ..., v_policy => ..."
-	(both defaulting to "automatic")
-
-2004/12/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-2004/12/02  Pixel  <pixel at mandrakesoft.com>
-
-	* unused/migrate-ugtk2-to-mygtk2.pl: replace "policy => [ horizpolicy,
-	vertpolicy ]" with "h_policy => ..., v_policy => ..."
-	(both defaulting to "automatic")
-	dirty script easing the switch from ugtk2 to mygtk2 (beware!)
-
-	* mygtk2.pm: replace "policy => [ horizpolicy, vertpolicy ]" with
-	"h_policy => ..., v_policy => ..."
-	(both defaulting to "automatic")
-	future is in mygtk2, ugtk2 must die (and it will die, but not that soon
-	(to keep compatibility))
-
-	* rescue/make_rescue_img: remove temporary directory
-
-	* detect_devices.pm: helping titi that didn't get isLaptop() right in 3
-	commits ;p
-
-	* ugtk2.pm: use migrate-ugtk2-to-mygtk2.pl (and i verified the diff)
-	future is in mygtk2, ugtk2 must die (and it will die, but not that soon
-	(to keep compatibility))
-
-	* unused/migrate-ugtk2-to-mygtk2.el: dirty script easing the switch from
-	ugtk2 to mygtk2 (beware!)
-
-	* authentication.pm, any.pm: 
-	  - any::enableShadow() -> authentication::enable_shadow()
-	  - inline authentication::crypt()
-	move crypt() where it's needed
-
-2004/12/02  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* authentication.pm, any.pm: Move crypt() in the package it belongs to
-
-2004/12/01  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: simplify: grep already done
-	complete_usb_storage_info()
-
-2004/12/01  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* ugtk2.pm: return value for gtkset_mousecursor
-
-2004/12/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ja.po: typo fix
-
-2004/12/01  Warly  <warly at mandrakesoft.com>
-
-	* install_steps.pm: Add a SYSTEM to Corporate in /etc/sysconfig/system for
-	corporate
-
-	* share/compssUsers.corpo-server: remove development section in corpo
-	server
-
-	* install_any.pm: use the compssUsers related to the meta_class if it
-	exists
-
-	* share/compssUsers.suppl-desktop, share/compssUsers.suppl-server: add
-	compssUsers for supplementary CDs
-
-	* install_steps_gtk.pm: update the group selection layout to handle the
-	supplementary CD
-
-	* share/compssUsers.desktop: remove game for corpo desktop
-
-	* rescue/tree/etc/issue: change Mandrake Linux 10.0 into Mandrakelinux
-	Corporate 3.0
-
-	* share/themes-corporate.rc: correct the theme color for installation
-
-	* steps.pm: Do not activate the updates selection step during installation
-
-	* share/rpmsrate.corpo-server, share/rpmsrate.corpo-desktop: updated
-	rpmsrate for corporate desktop and server
-
-	* install_messages.pm: The coporate errata is corpo30errata.php3 and not
-	100errata.php3
-
-2004/11/30  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* mdk-stage1/Makefile, mdk-stage1/config-stage1.h: corporate
-
-2004/11/30  Pixel  <pixel at mandrakesoft.com>
-
-	* network/network.pm: don't pass the prefix/etc/sysconfig/network to
-	network::network::write_conf(), we always use the same file name
-	backport HEAD changes used by finish-install
-
-	* modules.pm: replace isStandalone with !isInstall (for finish-install
-	which is neither isInstall nor isStandalone)
-	replace isStandalone with !isInstall (for finish-install which is
-	neither isInstall nor isStandalone)
-
-	* install_steps_interactive.pm: 
-	  - move some functions from any.pm to authentication.pm
-	  - create authentication::ask_root_password_and_authentication() out of
-	install_steps_interactive::setRootPassword()
-	backport HEAD changes used by finish-install
-
-	* standalone/finish-install: don't keep the banner from drakconnect for
-	all steps
-	add drakx-finish-install
-	prog to launch after install which configurate users, authentication,
-	root password and network
-	don't keep the banner from drakconnect for all steps
-	add drakx-finish-install
-	prog to launch after install which configurate users, authentication,
-	root password and network
-
-	* any.pm, install_steps.pm: 
-	  - move some functions from any.pm to authentication.pm
-	  - create authentication::ask_root_password_and_authentication() out of
-	install_steps_interactive::setRootPassword()
-	backport HEAD changes used by finish-install
-	create any::set_root_passwd() and use it
-
-	* drakxtools.spec: add drakx-finish-install
-
-	* standalone/drakbackup: fix fatal perl_checker error
-	fix fatal perl_checker warning
-
-	* run_program.pm: replace !isStandalone with isInstall
-
-	* authentication.pm: make $when_network_is_up optional
-	  - move some functions from any.pm to authentication.pm
-	  - create authentication::ask_root_password_and_authentication() out of
-	install_steps_interactive::setRootPassword()
-	backport HEAD changes used by finish-install
-
-	* Makefile.config, Makefile, Makefile.drakxtools,
-	standalone/finish-install.xsetup: add drakx-finish-install
-	add drakx-finish-install
-
-	* network/netconnect.pm: network::netconnect::real_main() do not exit
-	brutally on wizcancel, handle it in network::netconnect::main()
-	network::netconnect::real_main() do not exit brutally on wizcancel,
-	handle it in network::netconnect::main()
-
-	* standalone/adduserdrake: backport HEAD changes used by finish-install
-
-	* standalone/drakauth: perl_checker fix
-	shorter
-	don't pass the prefix/etc/sysconfig/network to
-	network::network::write_conf(), we always use the same file name
-	$when_network_is_up is now optional
-	backport HEAD changes used by finish-install
-
-2004/11/30  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Warn when failing to mount the supplementary CD-ROM
-
-2004/11/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (dmidecode) explain why we return a list and not
-	directly an hash
-	(floppies) do not try to load floppy if there's no floppy drive (#8211)
-	a side effect is that now we'll still see the floppy drive even if
-	some buggy code triggered $@ earlier
-
-	* share/rpmsrate, lang.pm: install scim-anthy as well for japanese users
-
-	* install_any.pm (setDefaultPackages) perl_checker cleanup
-
-	* drakxtools.spec: typo fix
-
-	* harddrake/data.pm: rollback previous bogus commit
-
-2004/11/30  Warly  <warly at mandrakesoft.com>
-
-	* rescue/tree/etc/issue: update version for rescue issue
-
-2004/11/30  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm, any.pm: 
-	  - move some functions from any.pm to authentication.pm
-	  - create authentication::ask_root_password_and_authentication() out of
-	install_steps_interactive::setRootPassword()
-	create any::set_root_passwd() and use it
-	  - rely on adduser(8) to set the users password instead of using
-	write_passwd_user()
-	  - use adduser(8) during install (we now use the same code during and
-	after install)
-
-	* install_steps_interactive.pm: 
-	  - move some functions from any.pm to authentication.pm
-	  - create authentication::ask_root_password_and_authentication() out of
-	install_steps_interactive::setRootPassword()
-
-	* standalone/adduserdrake: 
-	  - rely on adduser(8) to set the users password instead of using
-	write_passwd_user()
-	  - use adduser(8) during install (we now use the same code during and
-	after install)
-
-	* authentication.pm: 
-	  - move some functions from any.pm to authentication.pm
-	  - create authentication::ask_root_password_and_authentication() out of
-	install_steps_interactive::setRootPassword()
-	white space normalisation
-
-2004/11/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/localedrake: Yes/no is better than Ok/cancel for logout
-	question
-
-	* harddrake/data.pm: rollback previous bogus commit
-	detect_devices::getModem() does not take an argument anymore
-
-	* share/rpmsrate, lang.pm: install scim-anthy as well for japanese users
-
-	* install_any.pm (setDefaultPackages) perl_checker cleanup
-
-	* detect_devices.pm (isLaptop) fix it on non PPC architectures
-	(dmidecode) add (explicit) memoization
-
-2004/11/29  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: perl_checker compliance
-	  - drop oem & recovery code (which was broken)
-	  - will be replaced with a root password + user accounts + network
-	configuration a la drakfirsttime
-
-	* authentication.pm: minimal authentication get() function
-	create %kind2pam_kind
-
-	* any.pm: rename allocUsers() to alloc_user_faces() (better suited)
-
-	* mdk-stage1/disk.h, install_steps_gtk.pm, docs/README, mdk-stage1/disk.c,
-	install_steps.pm, rescue/tree/etc/rc.sysinit, rescue/tree/etc/oem,
-	install_steps_interactive.pm, tools/oem-prepare, mdk-stage1/tools.c,
-	rescue/tree/etc/oem-all, rescue/.cvsignore, install2.pm,
-	mdk-stage1/stage1.c, rescue/Makefile, rescue/kernel_read_part.c: 
-	  - drop oem & recovery code (which was broken)
-	  - will be replaced with a root password + user accounts + network
-	configuration a la drakfirsttime
-
-2004/11/29  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install2.pm: A bit of grammar
-
-2004/11/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: add hint for translator
-
-	* share/po/ja.po: update (Yukiko Bando)
-
-	* install_any.pm (setDefaultPackages) better support for Toshiba laptops:
-	preload
-	toshiba driver and install toshutils (inspirated from
-	drivers/char/toshiba.c's audit)
-	(setDefaultPackages) better support for DELL laptops: preload i8k driver
-	better support for DELL laptops (inspirated from drivers/char/i8k.c's
-	audit)
-
-	* share/rpmsrate: ensure toshutils is present on media
-	ensure ik8utils is present on media
-
-2004/11/27  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/11/27  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* network/adsl_consts.pm: Don't load encoding.pm, it's not provided in the
-	stage 2 perl
-
-2004/11/26  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Add some tool in DEVELOPMENT section
-
-2004/11/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* standalone/harddrake2: fixed typo
-
-2004/11/26  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/card.pm: simplify
-
-	* partition_table/dos.pm: 
-	  - geometry XXX/240/63 is quite common, so add 240 to @valid_nb_heads
-	  - remove checking that nb_heads is in @valid_nb_heads
-	(this fixes yet another case of the infamous "XP doesn't boot" occuring
-	10.1
-	CE, though it should already be fixed via EDD)
-
-	* standalone/keyboarddrake: don't write X config when there is none
-	(otherwise we write a partial X config)
-
-	* Xconfig/monitor.pm: help perl another way that perl_checker prefers
-
-	* network/ethernet.pm: help perl_checker
-
-2004/11/26  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: We won't have files named
-	compssUsers.pl.<meta_class> since they're all
-	merged now.
-
-2004/11/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-
-	* drakxtools.spec: 10.2-0.5mdk
-
-2004/11/25  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Fix Totem installation when KDE and GNOME are both
-	installed.
-	Fix Quanta installation
-
-2004/11/25  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: moving partitions never really worked and is disabled since
-	years
-	safer
-
-	* Xconfig/card.pm: create function libgl_config() and have it after
-	setting Driver to 'fglrx' so
-	that libgl_config() can behave based on {Driver} instead of {Driver2}
-
-	* any.pm: remove /lib and /usr/lib with more verbose code
-	fix previous commit
-	handle the lib64 case separately
-
-	* pkgs.pm, devices.pm, install_any.pm: we don't use /tmp for devices
-	anymore
-	(this comes from long ago when redhat code was using a ro /dev and
-	creating other devices in /tmp)
-
-	* install_steps_gtk.pm: simpler code
-
-	* standalone/drakfloppy: minimal perl_checker compliance
-	use floppies_dev() instead of floppies()
-
-	* diskdrake/interactive.pm: moving partitions never really worked and is
-	disabled since years
-	  - create analyze_wild_device_name() out of
-	subpart_from_wild_device_name()
-	  - rename part2device() into part2wild_device_name(), change its
-	prototype and use analyze_wild_device_name()
-	  - new field {faked_device}
-	  - for LABEL=..., {device} is not empty anymore and {faked_device} is
-	set,
-	merge_fstabs() will take care of having the real {device} and
-	{faked_device} unset
-	  - for devfs_device, {device} is set to the devfs device,
-	  merge_fstabs() will take care of having the non devfs device in
-	{device}
-
-	* standalone/diskdrake: use fs::get::device2part()
-	use fs::get::device2part()
-
-	* fs.pm: remove unused var
-	we don't use /tmp for devices anymore
-	(this comes from long ago when redhat code was using a ro /dev and
-	creating other devices in /tmp)
-	  - create analyze_wild_device_name() out of
-	subpart_from_wild_device_name()
-	  - rename part2device() into part2wild_device_name(), change its
-	prototype and use analyze_wild_device_name()
-	  - new field {faked_device}
-	  - for LABEL=..., {device} is not empty anymore and {faked_device} is
-	set,
-	merge_fstabs() will take care of having the real {device} and
-	{faked_device} unset
-	  - for devfs_device, {device} is set to the devfs device,
-	  merge_fstabs() will take care of having the non devfs device in
-	{device}
-	more intelligent sort of fstab to handle loopback files or bind
-	directory (bug anthil #1198)
-
-2004/11/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: do not probe memory chips at boot time ...
-
-	* standalone/printerdrake (About) let be more l10n friendly regarding
-	"translatability"
-	(About) let be more l10n friendly regarding font's weight and size
-
-	* modules.pm (load_and_configure) fix setting scsi and usb probell in live
-	CD (thus fixing
-	mousedrake --auto with USB mice on live CD)
-
-	* modules/any_conf.pm: ensure that explanations go into
-	/var/log/explanations is standalone mode
-	(log::explanations() just calls log::l() at install time)
-
-	* standalone/service_harddrake: do not die if sound never was configured
-	(aka on first boot on live CD)
-
-	* drakxtools.spec: fix spacing in 10.2-0.4mdk's changelog
-	10.2-0.4mdk
-
-2004/11/24  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/11/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: list Turkish language in both Asia and Europe (for Istanbul)
-
-2004/11/23  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: fix {device_alias} containing /dev/xxx instead of xxx. The bug
-	was
-	"none /mnt/cdrom supermount dev=/dev//dev/cdrom,fs=iso9660..."
-	(bugzilla #12224)
-	fix {device_alias} containing /dev/xxx instead of xxx. The bug was
-	  "none /mnt/cdrom supermount dev=/dev//dev/cdrom,fs=iso9660..."
-	(bugzilla #12224)
-
-	* partition_table/raw.pm: detect on lilo on floppy (bugzilla #12213)
-	detect on lilo on floppy (bugzilla #12213)
-
-	* bootloader.pm: don't use typeOfMBR to check the method on floppy which
-	may not be inserted
-	(part of bugzilla #12213)
-	don't use typeOfMBR to check the method on floppy which may not be
-	inserted
-	(part of bugzilla #12213)
-
-2004/11/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ja.po: update (Yukiko Bando)
-
-	* share/po/fr.po: update (kournikolas)
-
-	* share/po/br.po: update
-
-2004/11/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ja.po: update (Yukiko Bando)
-
-	* share/po/br.po: update
-
-2004/11/22  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/make_rescue_img, mdk-stage1/pci-resource/update-pci-ids.pl,
-	docs/HACKING, Makefile: 
-	  - no more kernel/all.modules, things are in kernel/all.kernels
-	  - cleanup what we keep in kernel/all.kernels: only vmlinuz,
-	modules.dep, *.mar, all_modules.tar, modules.cz
-	  - replace all_modules.list + modules with all_modules.tar
-	  - kernel/all.modules/modules.cz-VERSION are now in
-	kernel/all.kernels/VERSION/modules.cz
-	  - allow having a normal in isolinux, but don't use it for floppy
-	images
-	(for this, add kernel/all.kernels/.main-BOOT)
-	  - add many modules kernel/list_modules.pm in unused categories since
-	we don't
-	  take all modules from kernel, only those listed
-	  (needed to have a not too big modules.cz for normal kernel)
-	  - complete rewrite of update_kernel (now written in perl)
-
-2004/11/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm (real_main) in "ADSL provider" step, plain reset
-	the protocol on
-	provider switch
-
-	* standalone/harddrake2: kill a stock icon
-
-	* share/po/br.po: update
-
-2004/11/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm (alsa2oss) add snd-azx
-
-	* share/rpmsrate: fix wrong package name
-
-2004/11/18  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* install_steps_gtk.pm: use 'fbdev' server on x86_64 too
-
-	* share/advertising/list-cpd, share/advertising/list-cps: update to match
-	warly's config files
-
-2004/11/18  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive.pm: fix prototype
-	remove some unneeded ";", add some for normalization (as told by
-	perl_checker)
-
-	* install_steps_interactive.pm, diskdrake/interactive.pm: since we don't
-	use ramdisk but clp, some code is dead
-	(remove usingRamdisk(), check_prog(), remove_unused()...)
-	add some ";", remove some ";", as told by perl_checker
-
-	* install2.pm, pkgs.pm, run_program.pm: since we don't use ramdisk but
-	clp, some code is dead
-	(remove usingRamdisk(), check_prog(), remove_unused()...)
-
-	* lang.pm, fs.pm, common.pm, install_any.pm: since we don't use ramdisk
-	but clp, some code is dead
-	(remove usingRamdisk(), check_prog(), remove_unused()...)
-	remove some unneeded ";", add some for normalization (as told by
-	perl_checker)
-
-	* partition_table/gpt.pm, standalone/harddrake2, partition_table/raw.pm,
-	partition_table/mac.pm, install_steps_auto_install.pm,
-	diskdrake/hd_gtk.pm: add some ";", remove some ";", as told by
-	perl_checker
-
-	* wizards.pm, install_steps.pm, install_gtk.pm, network/isdn.pm,
-	diskdrake/resize_ntfs.pm, network/netconnect.pm, mouse.pm, lvm.pm,
-	devices.pm, raid.pm, crypto.pm, Xconfig/screen.pm, commands.pm,
-	install_interactive.pm, ugtk2.pm, partition_table.pm, any.pm,
-	interactive/stdio.pm, interactive/newt.pm, harddrake/sound.pm,
-	services.pm, authentication.pm, network/ethernet.pm, bootloader.pm,
-	harddrake/data.pm, interactive/gtk.pm, network/adsl.pm, fsedit.pm,
-	detect_devices.pm, modules.pm, network/shorewall.pm: remove some
-	unneeded ";", add some for normalization (as told by perl_checker)
-
-2004/11/18  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/hd_gtk.pm, install_steps_auto_install.pm,
-	partition_table/mac.pm, diskdrake/interactive.pm, standalone/harddrake2,
-	partition_table/raw.pm, partition_table/gpt.pm,
-	install_steps_interactive.pm: add some ";", remove some ";", as told by
-	perl_checker
-
-2004/11/17  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm: really remove the VG from internal list of
-	{lvms}, not on a copy
-
-	* install_steps_interactive.pm: fix indentation
-
-	* partition_table.pm: also remove "require partition_table::lvm_PV"
-	comment for perl_checker
-
-2004/11/17  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* crypto.pm: Update inline mirror list again (the previous one was broken)
-	Update the inline mirror list for mini isos
-	Integrate from trunk (mirror list update)
-	Integrate fixes for mini-ISOs from the trunk.
-
-	* install_any.pm: Integrate fixes for mini-ISOs from the trunk.
-
-2004/11/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm: add new sound drivers from
-	kernel-tmb-2.6.7-2.tmb.6mdk
-
-	* modules.pm: on 10.0, b44 failled on newer cards; let's try bcm4400 too
-
-	* drakxtools.spec: bump requires on ldetect-lst b/c of s/3c90x/3c59x/
-	10.2-0.3mdk
-	fill in 10.2-0.2mdk's changelog
-	10-34.8.100mdk
-	10-34.7.100mdk
-
-	* standalone/service_harddrake: backport from 10.1: adapt to new nvidia
-	driver location due to
-	corporate now using DKMS
-
-2004/11/16  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/list.i386, rescue/list.ia64, rescue/list, rescue/list.ppc,
-	rescue/list.x86_64: move libperl.so from list.ARCH back to list, using a
-	wildcard
-
-	* fs/type.pm: for sunos:
-	  - "SunOS swap" and "Whole disk" don't use ufs
-	  - drop isSunOS(): replace it with testing {fs_type} eq 'ufs'
-	create isEmpty() and use it instead of simply testing {pt_type}, since
-	{pt_type} can be undef whereas {fs_type} is set
-	don't use pseudo fs_type "apple" for Apple Bootstrap partitions, better
-	only use {pt_type} for non mountable partitions
-
-	* fs/get.pm, diskdrake/interactive.pm, diskdrake/hd_gtk.pm: create
-	isEmpty() and use it instead of simply testing {pt_type}, since
-	{pt_type} can be undef whereas {fs_type} is set
-
-	* lang.pm: fix typo (thanks to bugzilla #12387)
-
-	* fsedit.pm, partition_table/lvm_PV.pm: handle more nicely raw_lvm_PV
-	(don't simply ignore them)
-
-	* partition_table/empty.pm: empty partition table means sectors #0 and #1
-	are zeroes, not simply sector #0
-	(this gives a chance to raw_lvm_PV which has its magic on sector #1)
-
-	* partition_table.pm: handle more nicely raw_lvm_PV (don't simply ignore
-	them)
-	don't die in will_tell_kernel() when the device is weird, since it is
-	normal when destroying a raw_lvm_PV
-	enhance readability
-	create isEmpty() and use it instead of simply testing {pt_type}, since
-	{pt_type} can be undef whereas {fs_type} is set
-
-	* detect_devices.pm: update ppc kernel modules detection & loading
-	cleanup get_mac_generation()
-
-	* tools/make_mdkinst_stage2, tools/mdkinst_stage2_tool: major switch from
-	ramdisk to clp
-	  - make_mdkinst_stage2 is now mdkinst_stage2_tool
-	(we don't keep the live when building the clp, mdkinst_stage2_tool is
-	able to create the clp from the live, or the live from the clp)
-
-	* partition_table/raw.pm: fix yaboot detection
-
-	* bootloader.pm: rename get_of_dev() -> dev2yaboot()
-	don't write boot OF in /tmp/of_boot_dev, better use dev2yaboot() instead
-	  - create yaboot2file() and use it
-	  - update read_lilo() for yaboot
-	  - update write_yaboot()
-	  - remove {useboot}
-	  - set {boot} to /dev/sda1 in suggest() instead of handling it in
-	write_yaboot()
-
-	* Xconfig/card.pm: enable UseFBDev in X configs on ppc, for rage128 and
-	radeon
-	set raw_LINES on every fglrx devices
-	drop broken code
-	  - setting VideoRam for i810
-	  - unsetting UseFBDev for r128 on ppc
-
-	* modules.pm: update ppc kernel modules detection & loading
-
-	* mdk-stage1/disk.c, mdk-stage1/tools.h, Makefile, mdk-stage1/cdrom.c,
-	mdk-stage1/config-stage1.h, rescue/Makefile, mdk-stage1/directory.c,
-	mdk-stage1/Makefile, docs/README, mdk-stage1/tools.c, rescue/.cvsignore,
-	rescue/make_rescue_img, mdk-stage1/network.c: major switch from ramdisk
-	to clp
-	  - mdkinst_stage2.bz2 is now mdkinst.clp
-	  - rescue_stage2.bz2 is now rescue.clp
-	  - make_mdkinst_stage2 is now mdkinst_stage2_tool
-	(we don't keep the live when building the clp, mdkinst_stage2_tool is
-	able to create the clp from the live, or the live from the clp)
-	  - all stage1 images now need cryptoloop & gzloop
-	  - the clp can be preloaded in memory or not (see
-	MEM_LIMIT_DRAKX_PRELOAD and MEM_LIMIT_RESCUE_PRELOAD)
-	  (for http & ftp, it *must* be preloaded)
-	  - we don't uncompress the ramdisk anymore since the decompression is
-	done on the fly, this makes the rescue boot much faster
-	  - function get_ramdisk_realname() is replaced with macro CLP_FILE_REL
-
-	* pkgs.pm: enhance analyse_kernel_name(), esp. to handle i686-up-64GB
-
-	* any.pm: don't write boot OF in /tmp/of_boot_dev, better use dev2yaboot()
-	instead
-
-	* tools/Makefile: make_mdkinst_stage2 is no more, hail mdkinst_stage2_tool
-
-2004/11/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake, harddrake/data.pm: on startup, redo ethX
-	aliases
-	on startup, redo ethX aliases
-
-2004/11/15  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: 
-	  - special bootstrap partition warning for IBM mac_generation
-	  - no "OldWorld or Unknown machine" for IBM mac_generation
-
-2004/11/15  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* drakxtools.spec: new release for new perl
-
-	* share/list: Adjust perl architecture, now that we don't have threads
-	anymore
-
-2004/11/14  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: switch to gbk in zh_CN
-
-2004/11/13  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/list: add partimage
-
-2004/11/12  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: no "auto install floppy"
-	on ppc
-
-	* mdk-stage1/Makefile.common: cleanup
-	simplify
-	build init using $(DIET) just like stage2-* (needed for ppc, and nicer),
-	unify LDFLAGS_INIT and LDFLAGS_STAGE1
-	remove GLIBC_LDFLAGS_STAGE1 and DIETLIBC_LDFLAGS_STAGE1 since they were
-	not used everywhere,
-	and so it was not easy to understand
-	drop unused INIT_LIBC, GLIBC_LIBC, DIETLIBC_LIBC (all 3 were empty at
-	the moment)
-
-	* tools/ddcprobe/Makefile: disable ddcprobe again - it doesn't work right,
-	causing the installer to halt
-	with a divide by zero error
-
-	* share/themes-galaxy.rc: the color of the categories of steps is better
-	in the theme
-	(it was the only part not defined in the theme but in the code)
-
-	* mdk-stage1/Makefile: build init using $(DIET) just like stage2-* (needed
-	for ppc, and nicer),
-	unify LDFLAGS_INIT and LDFLAGS_STAGE1
-	remove GLIBC_LDFLAGS_STAGE1 and DIETLIBC_LDFLAGS_STAGE1 since they were
-	not used everywhere,
-	and so it was not easy to understand
-	drop unused INIT_LIBC, GLIBC_LIBC, DIETLIBC_LIBC (all 3 were empty at
-	the moment)
-	don't use minilibc.h on ppc
-	simplify arch dependent config based on dietlibc vs glibc.
-	this patch may be wrong for ppc which now used dietlibc but may prefer
-	init-libc-headers.h over minilibc.h
-	(need testing)
-	some defines are not arch dependent
-
-	* install_gtk.pm: the color of the categories of steps is better in the
-	theme
-	(it was the only part not defined in the theme but in the code)
-	fix converting the background color
-
-2004/11/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po, share/po/mk.po: updated Macedonian file
-
-2004/11/10  Pixel  <pixel at mandrakesoft.com>
-
-	* drakxtools.spec: drakauth: add SmartCard authentication
-
-	* authentication.pm: 
-	  - correctly restore pam.d/system-auth when setting "local"
-	authentication
-	  - no use_first_pass on "auth sufficient pam_unix.so" line for
-	pam_castella
-	  - correctly restore pam.d/system-auth when setting "local"
-	authentication
-	  - no use_first_pass on "auth sufficient pam_unix.so" line for
-	pam_castella
-
-2004/11/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: sync ADSL ISPs DB with HEAD
-
-	* drakxtools.spec: 10.2-0.1mdk
-	merge 10.1-27mdk's changelog from MDK10.1 branch
-	merge in lost changelog
-	10.1-27.1.101mdk
-	fix 10.1-27mdk's changelog
-
-	* standalone/service_harddrake: load yenta_socket and the like for PCMCIA
-	controllers
-
-	* standalone/logdrake: fix logdrake speed (should have been commited long
-	time ago)
-	fix logdrake speed (should have been commited long time ago)
-
-	* detect_devices.pm (isLaptop) fix it on non PPC arches
-
-	* network/ethernet.pm (mapIntfToDevice) backport 9box detection fix:
-	do not try to match usb devices since ldetect doesn't return enough data
-
-	* share/rpmsrate: install drivers for ipw2xOO
-	sync relevant "hardware/driver matching" bits from Head
-
-	* network/isdn_consts.pm: backport support for Philips Semiconductors DSL
-	card
-
-2004/11/10  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: add pm_mkhomedir
-
-2004/11/09  Funda Wang <fundawang at linux.net.cn>
-
-	* pkgs.pm: reverted pkgs, Sorry
-	s/fctix/fcitx. Critical typo
-
-	* lang.pm: s/fctix/fcitx. Critical typo
-
-2004/11/09  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/11/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/tools.pm: introduce network::tools::get_interface_status
-
-2004/11/09  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/card.pm: fix regexp given to matching_driver (otherwise
-	smartcard:xxx matches)
-	fix regexp given to matching_driver (otherwise smartcard:xxx matches)
-
-2004/11/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getSagem) do not probe for old adiusbadsl driver
-	(which is deprecated
-	by eagle-usb for more than one year)
-
-	* network/adsl_consts.pm: update/add ADSL ISP entries (Benoit Audouard)
-	reorder finnish entry
-
-	* lang.pm: backport s/fctix/fcitx/ fix from HEAD
-
-	* drakxtools.spec: bump require on ldetect-lst b/c of
-	s/adiusbadsl/eagleusb/
-
-	* share/theme-editor.pl: basic port from Gtk-1.2.x to Gtk+-2.x
-
-2004/11/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tg.po, share/po/pt.po: updated Tajik file
-
-2004/11/08  Pixel  <pixel at mandrakesoft.com>
-
-	* common.pm, install2.pm: cp_af() is missing in perl-MDK-Common
-	1.1.11-2mdk
-
-	* lvm.pm: call pvremove on every PVs when destroying a VG (to clear the
-	LVM2 magic) (bugzilla #11579)
-
-	* Xconfig/card.pm, do_pkgs.pm, bootloader.pm: backport
-	check_kernel_module_packages() from 10.1 to adapt to dkms proprietary
-	packages
-
-2004/11/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: do not use slicing when selecting single values
-
-2004/11/07  huftis
-
-	* share/po/nn.po: More translated.
-
-2004/11/07  Pixel  <pixel at mandrakesoft.com>
-
-	* authentication.pm: SmartCard authentication needs pkg castella-pam
-	SmartCard authentication needs pkg castella-pam
-
-2004/11/06  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/11/05  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: hide ifcfg files for non-root users if they contain
-	a WEP key (#12177)
-	hide ifcfg files for non-root users if they contain a WEP key (#12177)
-
-	* mdk-stage1/pcmcia_/probe.c: merge from pcitable
-
-2004/11/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/de.po: updated Estonian and German files
-
-2004/11/05  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/directory.c: RAMDISK_LOCATION_REL is a better name than
-	RAMDISK_LOCATION
-	create choose_iso_in_directory() out of try_with_directory()
-
-	* mdk-stage1/tools.c: we use pivot_root for rescue, so don't umount
-	STAGE2_LOCATION
-	saving stage1 resolv.conf is done in finish_preparing() with no special
-	code needed for rescue
-	(as was done in save_stuff_for_rescue())
-	RAMDISK_LOCATION_REL is a better name than RAMDISK_LOCATION
-
-	* Makefile: do not gzip pm files anymore (since we will soon use
-	compressed loopback, this is not useful anymore)
-	create install/stage2/mdkinst.kernels which contains the list of kernels
-	known by stage2.
-	this replaces looking at install/stage2/live/modules/modules.cz-xxx
-	(why? cuz install/stage2/live is going to be removed!)
-	simplify
-
-	* mdk-stage1/network.c: use install/stage2/mdkinst.kernels to check stage2
-	kernel version instead of install/stage2/live/lib/modules.cz-xxx
-
-	* mdk-stage1/config-stage1.h: RAMDISK_LOCATION_REL is a better name than
-	RAMDISK_LOCATION
-
-	* share/list: do not gzip pm files anymore (since we will soon use
-	compressed loopback, this is not useful anymore)
-
-	* mdk-stage1/Makefile: 
-	  - no need to build stage1-cdrom nor stage1-network for MOVE
-	  - for stage1-full, no special .c is needed for MOVE
-	cleanup (hoist MOVE_ADDSRC in STAGE1SRC)
-	remove duplicates in STAGE1OBJS-FULL, this removes make warnings
-
-	* authentication.pm: add "Smart Card" authentication (using pam_castella)
-	(as asked by flepied)
-	add "Smart Card" authentication (using pam_castella) (as asked by
-	flepied)
-
-	* rescue/tree/usr/share/symlinks, mdk-stage1/stage1.c: keep the tmpfs and
-	rescue in /tmp/stage2
-	(this allows to mount the rescue read-only)
-
-	* rescue/tree/etc/rc.sysinit: umount /stage1 when /etc/mtab exists to
-	remove a warning
-	free up stage1 memory
-	fix typo
-	keep the tmpfs and rescue in /tmp/stage2
-	(this allows to mount the rescue read-only)
-
-2004/11/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque po file
-
-2004/11/04  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/stage1.h: MODE_RAMDISK is now unused
-	drop IS_SPECIAL_STAGE2 in favor of IS_RESCUE
-
-	* mdk-stage1/modules.c: LIVE_LOCATION is better named LIVE_LOCATION_REL
-	without the leading "/"
-	cleanup code using kernel_module_extension()
-
-	* mdk-stage1/stage1.c: 
-	  - create mount_clp_may_preload() out of handle_clp()
-	  - rename handle_clp() to handle_move_clp() and simplify its use
-	IMAGE_LOCATION_REAL is better named STAGE2_LOCATION in MOVE
-	replace RAW_LOCATION_REL with IMAGE_LOCATION_REL
-	(the absolute symlink will now be relative, but that's ok here)
-	simplify since STAGE2_LOCATION is now valid for live installs before
-	pivot_root
-	(due to previous stage1.c commit)
-	STAGE2_LOCATION symlink is now relative instead of absolute
-	(relies on the fact that STAGE2_LOCATION and IMAGE_LOCATION are both in
-	/tmp in non MOVE)
-	rename STAGE2_LOCATION_REL into STAGE2_LOCATION_ROOTED
-	(since STAGE2_LOCATION_REL is not relative, it's simply absolute when
-	chrooted)
-	create STAGE2_LOCATION symlink if it is not a directory (well more
-	precisely when it doesn't exist)
-	LIVE_LOCATION is better named LIVE_LOCATION_REL without the leading "/"
-
-	* mdk-stage1/network.c: LIVE_LOCATION is better named LIVE_LOCATION_REL
-	without the leading "/"
-	create str_ftp_error()
-
-	* mdk-stage1/config-stage1.h: 
-	  - create mount_clp_may_preload() out of handle_clp()
-	  - rename handle_clp() to handle_move_clp() and simplify its use
-	add some comments
-	IMAGE_LOCATION_REAL is better named STAGE2_LOCATION in MOVE
-	  - STAGE2_LOCATION is unused in MOVE
-	  - IMAGE_LOCATION_REAL is unused in non MOVE
-	replace RAW_LOCATION_REL with IMAGE_LOCATION_REL
-	(the absolute symlink will now be relative, but that's ok here)
-	new macro IMAGE_LOCATION_REL
-	rename STAGE2_LOCATION_REL into STAGE2_LOCATION_ROOTED
-	(since STAGE2_LOCATION_REL is not relative, it's simply absolute when
-	chrooted)
-	LIVE_LOCATION is better named LIVE_LOCATION_REL without the leading "/"
-
-	* mdk-stage1/tools.h: 
-	  - create mount_clp_may_preload() out of handle_clp()
-	  - rename handle_clp() to handle_move_clp() and simplify its use
-	test_that_cd() is now image_has_stage2()
-
-	* mdk-stage1/tools.c: 
-	  - create mount_clp_may_preload() out of handle_clp()
-	  - rename handle_clp() to handle_move_clp() and simplify its use
-	fix typo
-	create save_fd() out of copy_file()
-	MODE_RAMDISK is now unused
-	LIVE_LOCATION is better named LIVE_LOCATION_REL without the leading "/"
-	test_that_cd() is now image_has_stage2()
-	drop IS_SPECIAL_STAGE2 in favor of IS_RESCUE
-
-	* mdk-stage1/url.c, mdk-stage1/url.h: create str_ftp_error()
-
-	* mdk-stage1/directory.c: LIVE_LOCATION_REL doesn't exist anymore in MOVE
-	more comment
-	LIVE_LOCATION is better named LIVE_LOCATION_REL without the leading "/"
-	use image_has_stage2() (even if not equivalent for rescue since we now
-	check the stage2 stuff instead, but it should do)
-	drop IS_SPECIAL_STAGE2 in favor of IS_RESCUE
-
-	* mdk-stage1/cdrom.c: more comment
-	test_that_cd() is now image_has_stage2()
-	drop IS_SPECIAL_STAGE2 in favor of IS_RESCUE
-
-2004/11/04  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Create cfg dir if needed. Use xorg.conf.
-	Touch /etc/dhcpd.conf.etherboot.kernel if missing.
-	Ignore vmnet for broadcast address.
-	Start reworking PXE support.
-	Create cfg dir if needed, ignore vmnet for broadcast address.
-	Use xorg.conf. Touch dhcp.conf.etherboot.kernel.
-
-2004/11/02  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/tools.c: rename MEM_LIMIT_RAMDISK into MEM_LIMIT_DRAKX
-	compile less things when MANDRAKE_MOVE is defined
-	(needed so that future commits can restrict define's in config-stage1.h)
-
-	* mdk-stage1/directory.c: cleanup (remove warning when compiling with
-	MANDRAKE_MOVE defined)
-
-	* mdk-stage1/config-stage1.h: rename MEM_LIMIT_RAMDISK into
-	MEM_LIMIT_DRAKX
-
-	* mdk-stage1/disk.h, mdk-stage1/tools.h, mdk-stage1/stage1.c,
-	mdk-stage1/network.h: compile less things when MANDRAKE_MOVE is defined
-	(needed so that future commits can restrict define's in config-stage1.h)
-
-	* mdk-stage1/disk.c: use IMAGE_LOCATION_DIR where it should be
-	compile less things when MANDRAKE_MOVE is defined
-	(needed so that future commits can restrict define's in config-stage1.h)
-
-	* mdk-stage1/network.c: normalize code
-	rename MEM_LIMIT_RAMDISK into MEM_LIMIT_DRAKX
-	normalize code
-	use IMAGE_LOCATION_DIR where it should be
-	compile less things when MANDRAKE_MOVE is defined
-	(needed so that future commits can restrict define's in config-stage1.h)
-
-2004/11/02  rstandtke
-
-	* share/po/de.po: some fixes
-
-2004/11/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm: perl_checker cleanups
-	(dmidecode) provide more fields
-	(computer_info) simplify
-	(dmidecode) handle multiple devices with same name
-	(computer_info) split it out of dmidecode()
-
-	* standalone/harddrake2, harddrake/data.pm: display more information
-
-	* install_steps.pm (setupBootloaderBefore) dmidecode() was renamed as
-	computer_info()
-
-2004/10/29  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Anthill #1134 - advise user about anacron.
-
-2004/10/28  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* pkgs.pm: IA-64 and X86-64 are full 64-bit arches thus don't need
-	kernel-enterprise
-	IA-64 and X86-64 are full 64-bit arches and thus don't need
-	kernel-enterprise
-
-2004/10/28  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: corrections of errors
-	gi/perl-install/share/po/da.po
-
-2004/10/28  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/isdn_consts.pm: support Philips Semiconductors DSL card
-
-2004/10/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: bump buildrequires on ldetect and requires on
-	ldetect-lst so that
-	we've working support for freebox with USB link
-	10.1-27mdk
-
-2004/10/28  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: remove idmap from winbind AD
-	change description for Active directory
-	Remove sasl entry
-	Add check button for tls
-
-2004/10/27  Pixel  <pixel at mandrakesoft.com>
-
-	* raid.pm: since we need mdadm, ensure we have it (bugzilla #12146)
-
-	* diskdrake/interactive.pm: warn about created partition with a given
-	mount point but not formatted
-	since we need mdadm, ensure we have it (bugzilla #12146)
-
-	* any.pm: 
-	  - handle setting memsize mem= kernel parameter in a special function
-	  - rely on pack_append() to remove dups (using $uniq_dict_appends) in
-	set_append_with_key()
-	(drawback: it doesn't keep the order anymore)
-	split {get,set}_append() into {get,set}_append_with_key() and
-	{get,set}_append_simple()
-	remove dead code
-	modifying $e->{append} is useless since we override it with $append
-
-	* bootloader.pm: 
-	  - handle setting memsize mem= kernel parameter in a special function
-	  - rely on pack_append() to remove dups (using $uniq_dict_appends) in
-	set_append_with_key()
-	(drawback: it doesn't keep the order anymore)
-	split {get,set}_append() into {get,set}_append_with_key() and
-	{get,set}_append_simple()
-	many kernel parameters alike "console=tty0 console=ttyS0,57600" can take
-	different values, so we now take the safe side and only remove dups for
-	parameters we know the last parameter is used (bugzilla #12055)
-
-	* install_steps.pm: split {get,set}_append() into
-	{get,set}_append_with_key() and {get,set}_append_simple()
-	nicer
-
-	* diskdrake/hd_gtk.pm: use ToggleButton instead of Button so that selected
-	partition is visually toggled
-
-2004/10/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getUPS) fix again MGE USB UPSes
-	(getUPS) fix again MGE USB UPSes
-	(getUPS) fix again MGE USB UPSes
-
-	* standalone/drakups: backport working drakups
-
-	* network/ethernet.pm (mapIntfToDevice) do not try to match usb devices
-	since ldetect doesn't return
-	enough data (thus fixing 9box string)
-
-2004/10/27  Warly  <warly at mandrakesoft.com>
-
-	* install_any.pm: add more log into find_root_part
-
-2004/10/26  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* share/list.x86_64: add 'synaptics' module so that testing works
-	add 'synaptics' module so that testing works
-
-	* fs/type.pm: older partition types (ntfs) are also available to x86_64
-	older partition types (ntfs) are also available to x86_64
-
-	* bootloader.pm: run grub chrooted
-	run grub chrooted
-
-2004/10/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-2004/10/26  Pixel  <pixel at mandrakesoft.com>
-
-	* authentication.pm: configure sshd to use PAM when needed (sshd config
-	file is modified, but i did not test more)
-
-	* install_any.pm: help perl_checker
-	in upgrade, when we need to migrate device names, we must write the
-	fstab
-	in upgrade, when we need to migrate device names, we must write the
-	fstab
-
-	* run_program.pm: do not use die when forked, use log::l + c::_exit
-	instead
-	do not use die when forked, use log::l + c::_exit instead
-
-	* install_steps_interactive.pm: in upgrade, when we need to migrate device
-	names, we must write the fstab
-	in upgrade, when we need to migrate device names, we must write the
-	fstab
-
-	* raid.pm: newly created raids must have a fs_type (this was dropped in
-	rev 1.45, it was an error)
-	newly created raids must have a fs_type (this was dropped in rev 1.45,
-	it was an error)
-
-	* Xconfig/various.pm, standalone/drakboot, bootloader.pm,
-	standalone/bootloader-config: detectloader must handle specially
-	raid-extra-boot=mbr-only (bugzilla #12089)
-
-	* install_steps.pm: detectloader must handle specially
-	raid-extra-boot=mbr-only (bugzilla #12089)
-	in upgrade, when we need to migrate device names, we must write the
-	fstab
-	in upgrade, when we need to migrate device names, we must write the
-	fstab
-
-2004/10/26  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* crypto.pm: Remove spurious "my"
-
-2004/10/26  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: Fix net join for winbind
-	Changer order dialog in AD
-
-2004/10/26  Warly  <warly at mandrakesoft.com>
-
-	* install_any.pm: include support of the oem configuration file to display
-	the correct product name
-
-2004/10/25  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Some fixed
-
-2004/10/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po, share/po/gl.po: updated Basque and Galician files
-
-2004/10/25  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Merge French translations from cooker
-
-2004/10/21  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/harddrake2: 
-	  - backport patches to MDK-10-update branch for oem
-
-	* standalone/printerdrake: 
-	  - backport fixes to MDK-10-update
-
-2004/10/21  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: remove trailing slashes
-
-2004/10/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/gl.po: updated Galician file
-
-2004/10/19  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/printerdrake: 
-	  - perl_checker fixes
-	  - don't hardcore distroname
-	  - don't trigger help system when mandrake-doc-common is not installed
-	  - don't trigger bug report in oem mode
-
-	* standalone/harddrake2: 
-	  - don't trigger help system when mandrake-doc-common is not installed
-	  - don't trigger bug report in oem mode
-	  - don't hardcode distro name (usefull for oem to change the distro
-	name at only one place)
-
-2004/10/19  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: no need to set $::o->{locale} anymore
-	(it was introduced in 1.172, maybe for create_box_with_title(), but
-	doesn't seem useful anymore)
-
-	* standalone/net_monitor: really fix typo (ie revert gtknew() patch)
-	fix typo
-	simplify
-
-2004/10/19  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Repair FTP supplementary media with overriding of
-	rpmsrate and compssUsers.pl
-	Installation with a ftp supplementary media (for mini-isos) :
-	inline the mirror list (since fetching it causes weird network
-	problems).
-	Fix the handling of relative urls in ftp media when fetching hdlists
-	file.
-
-	* pkgs.pm: Installation with a ftp supplementary media (for mini-isos) :
-	inline the mirror list (since fetching it causes weird network
-	problems).
-	Fix the handling of relative urls in ftp media when fetching hdlists
-	file.
-
-	* install_steps_interactive.pm: This deserves an explanation
-	Installation with a ftp supplementary media (for mini-isos) :
-	inline the mirror list (since fetching it causes weird network
-	problems).
-	Fix the handling of relative urls in ftp media when fetching hdlists
-	file.
-
-	* crypto.pm: There are mirrors in many new countries now. (and sort the
-	list)
-	Installation with a ftp supplementary media (for mini-isos) :
-	inline the mirror list (since fetching it causes weird network
-	problems).
-	Fix the handling of relative urls in ftp media when fetching hdlists
-	file.
-
-2004/10/18  Warly  <warly at mandrakesoft.com>
-
-	* crypto.pm: update version checking code of crypto.pm
-
-2004/10/17  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-
-2004/10/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-
-2004/10/16  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_monitor (update) do not re-select the default interface
-	every 5 seconds
-
-2004/10/16  rstandtke
-
-	* share/po/de.po: added some translations
-
-2004/10/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/eu.po, share/po/es.po, share/po/am.po: updated
-	Basque and Amharic files
-
-2004/10/15  Pixel  <pixel at mandrakesoft.com>
-
-	* network/adsl.pm: cleanup
-
-	* network/tools.pm: cleanup thanks to perl_checker
-
-	* network/netconnect.pm: cleanup thanks to perl_checker
-	make perl_checker happy
-
-2004/10/14  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/10/14  Pixel  <pixel at mandrakesoft.com>
-
-	* lvm.pm: no need to run vgscan and vgchange in standalone
-	(nb: /etc/lvmtab is no more used, so i also dropped that check)
-
-	* network/tools.pm: simplify
-	cleanup thanks to perl_checker
-
-	* standalone/fileshareset: cleanup
-	perl_checker compliance
-
-	* rescue/devices.pl: create /dev/md* devices in rescue
-
-	* diskdrake/interactive.pm: document UUID md field
-
-	* standalone/drakups: perl_checker compliance
-
-	* standalone/harddrake2, standalone/service_harddrake: cleanup thanks to
-	perl_checker
-
-	* services.pm: simplify
-	simplify
-
-	* Xconfig/resolution_and_depth.pm: even if bugzilla #9755 says 24 bpp is
-	not valid for vmware, Nora Etukudo says the contrary on cooker.
-	the limitation seems to be "The guest X server must run at the same
-	depth and bpp as the host" which is hard to enforce in XFdrake
-
-	* raid.pm: put UUID instead of devices in mdadm.conf to be more device
-	naming independant
-	(as requested by Luca Berra on cooker)
-
-	* rescue/list: add /sbin/lvm2 to the rescue
-
-	* share/compssUsers.pl: remove unneeded parentheses
-
-2004/10/13  Antoine Ginies  <aginies at mandrakesoft.com> 
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.h, mdk-stage1/tools.h,
-	mdk-stage1/url.c, mdk-stage1/stage1.c, mdk-stage1/network.c,
-	mdk-stage1/network.h, mdk-stage1/url.h: add new installation method (ka)
-
-	* mdk-stage1/stage1-data/stage1-with-ka.tar.bz2: add stage1 with ka-tools
-
-2004/10/13  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/10/13  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/fileshareset: "portmap status" prints "portmap (pid XXXX) is
-	running..." which bothers progs calling fileshareset (eg: gnome)
-
-	* install_steps_interactive.pm: make perl_checker happy
-	don't ask the security level in firewire meta_class
-	don't ask the security level in firewire meta_class
-
-2004/10/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakfont: remove TODO entry regarding configurnig programs
-	that uses fontconfig
-
-2004/10/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/ethernet.pm (get_eth_cards) workaround more buggy drivers that
-	returns a bogus driver name for the GDRVINFO command of the ETHTOOL
-	ioctl
-
-	* standalone/drakconnect (del_intf) fix crash introduced by trainee just
-	before the release :-(
-
-	* drakxtools.spec: 10.1-26mdk
-
-	* share/po/br.po: update
-
-2004/10/11  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: in grub menu.lst, keep previous "serial ..." and
-	"terminal ..." lines (bugzilla #12054)
-
-2004/10/11  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-	* DrakX
-
-2004/10/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/ethernet.pm (get_eth_cards) fix another lying module
-
-	* drakxtools.spec: 10.1-25mdk
-
-2004/10/11  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: use k3b-dvd by default
-
-2004/10/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-24mdk
-
-2004/10/10  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-
-2004/10/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po: updated Persian file
-
-	* share/po/uk.po: updated Ukrainian file
-
-	* share/po/uz.po, share/po/pl.po, share/po/zh_TW.po, share/po/pt.po,
-	share/po/fr.po, share/po/hu.po, share/po/uz@Latn.po: updated Uzbek
-	files; checked various po files against latest *.pot
-
-	* share/po/ja.po: updated Japanese file
-
-	* share/po/nb.po, share/po/es.po: updated Spanish and Bokmål files
-
-	* share/po/it.po: updated Italian file
-
-2004/10/10  vljubovic
-
-	* share/po/bs.po: Fixing Bosnian translation
-
-2004/10/09  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2004/10/09  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/10/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_conf_backend) don't write ifcfg-ppp0 for
-	static/dhcp connections
-
-	* network/network.pm (configureNetwork2) remove
-	/etc/sysconfig/network-scripts/ethX files
-	that may have been created by sagem scripts
-
-	* standalone/drakconnect: remove /etc/sysconfig/network-scripts/ethX files
-
-2004/10/08  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: 1660:Welcome to the Printer Setup Wizard
-
-2004/10/08  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: jorge
-
-2004/10/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/fr.po: updated Estonian po file
-
-2004/10/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Missing French translations
-
-2004/10/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: fix encapsulation for chinese ISPs (Funda Wang,
-	#10965)
-
-	* share/rpmsrate: 
-	  - install ppp for RTC modems
-	  - install kppp too if KDE is selected
-	  - install drivers for HSF and HCF modems
-
-	* .perl_checker: perl_checker cannot currently parse the "encoding" and
-	the "utf8" modules
-
-	* network/netconnect.pm: try /dev/ttyS14 too for serial modems (ie
-	internal PCI modems that
-	don't need any driver but export a serial port instead)
-	start slmodemd when installing it (thus preventing the average user to
-	have to restart his machine in order to get a working connection)
-	fix H[CS]F modems configuration (kernel packages were renamed)
-
-	* drakxtools.spec: one more change for 10.1-23mdk
-	10.1-23mdk
-	10.1-22mdk
-
-2004/10/08  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: Simplify complicated Flags for ppp and kdenetwork-ppp
-	add shareutils installed by default in SYSTEM
-
-2004/10/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/fr.po: updated Estonian po file
-
-2004/10/08  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: on a recent kernel, we remove any existing devfs= kernel
-	option to enable udev
-
-2004/10/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Missing French translations
-	Fixes
-
-2004/10/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-22mdk
-
-2004/10/08  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: on a recent kernel, we remove any existing devfs= kernel
-	option to enable udev
-
-2004/10/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Fixes
-
-2004/10/07  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/lv.po,
-	share/po/hu.po, share/po/fa.po, share/po/id.po, share/po/ru.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: Updated POT
-
-	* share/po/zh_CN.po: Updated POT
-	Updated Simplified Chinese translation
-
-2004/10/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* network/adsl_consts.pm: corrected "Morocco" name; converted to UTF-8
-
-2004/10/07  Thomas Backlund  <tmb at mandrake.org>
-
-	* share/po/fi.po: update translations, 100% translated, was 22 fuzzy, 2
-	untranslated.
-
-	* share/po/sv.po: Updated translations, 100% translated, was 193 fuzzy,
-	138 untranslated.
-	 Whopee.... Swedish translations are now also at 100% ....
-
-2004/10/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: add chinese ISPs (fundawang@yeah.net, #10965)
-
-	* network/modem.pm (first_modem) fix crash at install time
-
-	* harddrake/data.pm: explain
-
-2004/10/07  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/various.pm, install_steps.pm, Xconfig/default.pm,
-	Xconfig/main.pm, harddrake/autoconf.pm: 
-	  - XFdrake can detect a auxmouse which was not detected by mousedrake
-	so we need to call various_xfree_conf()
-	  - this implies adding parameter $do_pkgs to a few functions
-
-	* Xconfig/parse.pm: fix parsing fully commented Section. eg:
-	#Section "Extensions"
-	#    Option "Composite" "Enable"
-	#    Option "RENDER" "Enable"
-	#Endsection
-
-2004/10/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/modem.pm (first_modem) fix crash at install time
-
-2004/10/07  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/various.pm, install_steps.pm, Xconfig/default.pm,
-	Xconfig/main.pm, harddrake/autoconf.pm: 
-	  - XFdrake can detect a auxmouse which was not detected by mousedrake
-	so we need to call various_xfree_conf()
-	  - this implies adding parameter $do_pkgs to a few functions
-
-	* Xconfig/parse.pm: fix parsing fully commented Section. eg:
-	#Section "Extensions"
-	#    Option "Composite" "Enable"
-	#    Option "RENDER" "Enable"
-	#Endsection
-
-2004/10/06  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: jorge
-
-2004/10/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/am.po: updated Amharic file
-
-	* share/po/nb.po: updated Bokmål file
-	updated Bokmål file
-
-2004/10/06  Thomas Backlund  <tmb at mandrake.org>
-
-	* share/po/sv.po: updated translations, was 269 fuzzy, 193 untranslated,
-	 is now 171 fuzzy, 136 untranslated, the rest will be done by
-	 tomorrow (today?)
-
-2004/10/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Bokmål file
-
-2004/10/06  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: fix regexp decompose_vmlinuz_name (broke with kernel
-	vmlinuz-2.6.8.1-12.1mdk)
-
-2004/10/06  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_auto_install.pm: Unneccessary in cooker
-
-2004/10/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: log one more change in 10.1-21mdk
-	10.1-21mdk
-
-	* detect_devices.pm (getUPS) fix detecting UPS devices
-
-2004/10/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* services.pm: fixed encoding problem with the output of start/stop init
-	scripts
-	(the output must be forced to utf-8 in order to have it displayed in
-	gtk2)
-
-2004/10/05  Pixel  <pixel at mandrakesoft.com>
-
-	* install_gtk.pm: no special theme for meta_class firewall
-	no special theme for meta_class firewall
-
-	* install_steps_interactive.pm: for meta_class firewall, call the general
-	netconnect function
-	don't warnAboutNaughtyServers if meta_class is firewall
-	for meta_class firewall, call the general netconnect function
-	don't warnAboutNaughtyServers if meta_class is firewall
-
-	* Makefile: remove bad uniq now unneeded
-	use TMPDIR
-
-	* Makefile.config: add TMPDIR
-
-	* install2.pm: don't install updates when meta_class is firewall
-	don't install updates when meta_class is firewall
-
-	* partition_table.pm: don't use devices::part_number(), otherwise it fails
-	with c0d0p* devices
-
-	* network/netconnect.pm: don't configure firewall after configuring
-	network during install
-	(in summary you can configure firewall directly)
-
-2004/10/05  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_auto_install.pm: Add a dummy ask_yesorno for autoinstalls
-
-	* crypto.pm: Further normalization of updates directories.
-	New mirror structure for official updates
-
-2004/10/05  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2004/10/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getUPS) add proper support for "American Power
-	Conversion|Back-UPS"
-	(getUPS) fix port for MGE's USB UPSes
-	(getUPS) fix drivers
-	(getUPS) typo fix
-	(getUPS) detect "American Power Conversion" UPS too
-
-	* drakxtools.spec: 10.1-20mdk
-	10.1-19mdk
-
-	* standalone/drakups: in manual adding:
-	  - let's have unique UPS names in the list
-	  - fix reading driver from the list
-	write config in pure wizard mode
-	(writeconf) restart upsd daemon
-	install nut earlier
-	fix installing nut
-
-	* standalone/drakfont (font_choice) remove debug message
-	fix closing import dialog (#11052)
-
-	* ugtk2.pm (Gtk2::ComboBox->set_text) do not die in official release
-
-	* pkgs.pm (supplCDMountPoint) perl_checker cleanup
-
-	* standalone/drakconnect (save) applying changes can be quite time
-	expensive, especially with
-	ppp and wifi connections thus let's show the same "wait" dialog like
-	in the old interface
-
-	* network/adsl_consts.pm: add a few new ADSL ISP : Argentina (Speedy),
-	Austria (AON), Morrocco
-	(Maroc Telecom) and Thailand (Asianet) (baud)
-	fix wrong VCI which wasn't in hexa for brazililan Velox/Telemar ISP
-	(baud)
-
-2004/10/05  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: fix madwifi_kernel in madwifi-kernel
-
-2004/10/05  Pixel  <pixel at mandrakesoft.com>
-
-	* Makefile: remove bad uniq now unneeded
-	remove unused specific_arch
-
-	* partition_table.pm: don't use devices::part_number(), otherwise it fails
-	with c0d0p* devices
-
-	* tools/specific_arch: specific_arch will now return only the specific
-	arch file, not the main one
-	(which is what we want for perl-install/share/symlinks,
-	perl-install/share/list and rescue/list)
-
-2004/10/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-19mdk
-
-	* ugtk2.pm (Gtk2::ComboBox->set_text) do not die in official release
-
-	* network/adsl_consts.pm: add a few new ADSL ISP : Argentina (Speedy),
-	Austria (AON), Morrocco
-	(Maroc Telecom) and Thailand (Asianet) (baud)
-	fix wrong VCI which wasn't in hexa for brazililan Velox/Telemar ISP
-	(baud)
-
-2004/10/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakconnect (apply) recompute NETWORK and BROADCAST fiels in
-	manage interface
-	(manage) use both type and device name in non-ethernet interfaces list
-	(build_notebook) do not crash if BOOTPROTO is empty, use 'none' by
-	default (#11899)
-
-	* network/netconnect.pm: do not lose GATEWAYDEV if it is a non wireless
-	one and a static
-	wireless card is configured (and vice versa)
-
-2004/10/04  rcasha
-
-	* share/po/mt.po: var
-
-2004/10/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-18mdk
-	typo fix in 10.1-17mdk's changelog
-
-	* standalone/service_harddrake: remove what should had never been commited
-
-2004/10/04  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Fix "Corporate Desktop" advertisment
-
-2004/10/04  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/sys/io.h: allow ioports on x86_64 too for
-	pcmcia support
-
-	* c/smp.c: 64-bit fixes for x86_64
-
-	* share/symlinks.x86_64: extra links on x86_64
-
-	* rescue/list.x86_64: add grub files
-
-	* Makefile: handle lib64 dirs, build pcmcia stuff on x86_64 too, handle
-	arch-specific
-	symlinks additions.
-
-	* fs/type.pm: re-enable xfs on x86_64, for testing
-
-	* Xconfig/card.pm: make perl_checker happy
-	x86_64 is a lib64 platform, so handle nvidia glx here too (and ati in
-	the future)
-
-	* share/list.x86_64: updates for xorg
-
-	* share/list: lib64 fixes, add im-cedilla
-
-	* mdk-stage1/rescue-gui.c: allow recovery of MS bootloader on x86 too
-
-2004/10/04  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: 1645:
-	NOTE: Depending on the printer model and the printing system up to %d MB
-	of
-	additional software will be installed.
-
-2004/10/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: do not lose GATEWAYDEV if it is a non wireless
-	one and a static
-	wireless card is configured (and vice versa)
-	write wlan-ng config files for prism2 drivers
-
-2004/10/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po: updated Italian file
-
-2004/10/04  rcasha
-
-	* share/po/mt.po: var
-
-2004/10/04  rstandtke
-
-	* share/po/de.po: some additions
-
-2004/10/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake: remove what should had never been commited
-	do not disable glx when switching from nvidia driver to nv (indirect
-	support, #11285)
-	do not failled when hw db is corrupted
-
-	* share/po/br.po: fix inverted translation for autologin
-
-	* drakxtools.spec: 10.1-18mdk
-	typo fix in 10.1-17mdk's changelog
-	10.1-17mdk
-	10.1-16mdk
-
-2004/10/04  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: mdkkdm is now the default again
-
-2004/10/03  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/10/03  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	soft/menu-messages/da.po soft/mdkonline/po/da.po
-	soft/mountloop/po/da.po gi/perl-install/share/po/da.po
-
-2004/10/03  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: fix typo
-	(sagem_set_parameters, adsl_conf_backend): write static ip in
-	eagle-usb.conf if needed for sagem modems, else erase it
-
-	* install_steps_interactive.pm (configureNetwork) load only ethernet
-	modules before easy_dhcp (this
-	will load firewire modules after other ethernet modules, so firewire
-	interfaces won't always take the name eth0)
-
-	* network/netconnect.pm: remove TYPE field in ifcfg files if connection
-	type isn't ADSL
-	perl_checker fix
-	do not lose ONBOOT setting for manual/dhcp dsl connections
-	misc sagem fixes:
-	  - allow to write static ip in eagle-usb.conf (write this file later)
-	  - load sagem specific modules/programs before config is written
-	  - do not reset IP address each time it is configured
-	  - automatically guess gateway for static connections
-	do not break the "IP %s address is usually reserved" warning
-
-2004/10/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/pt.po: updated Persian file; put back current
-	version of Portuguese file
-
-2004/10/03  rcasha
-
-	* share/po/mt.po: var
-
-2004/10/03  tsdgeos
-
-	* share/po/ca.po: Small updates for ca
-
-2004/10/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-
-2004/10/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: fix keyboard names
-
-2004/10/01  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: 
-	  - added Romain
-
-2004/10/01  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* network/network.pm: call the scripts in
-	/etc/sysconfig/network-scripts/hostname.d like the network
-	scripts are doing when changing the hostname.
-
-2004/10/01  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: create $intf->{sagem} when needed before checking
-	it exists ...
-	(make sagem usable again with dhcp/static connections)
-
-	* mouse.pm (detect) fix synaptics auto-detection
-
-2004/10/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-	* share/po/uk.po: updated Ukrainian file
-
-2004/10/01  Pixel  <pixel at mandrakesoft.com>
-
-	* share/compssUsers.pl, share/compssUsers-powerpack.pl,
-	share/compssUsers-discovery.pl, share/compssUsers-powerpackplus.pl:
-	dynamically choose the compssUsers based on meta_class, so now we have
-	only one compssUsers.pl
-
-	* share/rpmsrate: revert part of the commit that was not done on purpose
-	(nb: don't modify rpmsrate *after* running clean-rpmsrate)
-
-	* pkgs.pm: fix logging rpmsrate_flags_chosen
-
-	* install2.pm: 
-	  - prosuite is now named powerpackplus
-	  - simplify the code searching for the meta_class
-	fix logging rpmsrate_flags_chosen
-
-2004/10/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakups: add --wizard option in order to directly run the
-	wizard
-	do not show banner when embedded
-
-	* standalone/service_harddrake.sh: run harddrake service on stop
-
-	* share/rpmsrate: try harder to include IMs on CDs
-
-	* standalone/service_harddrake: on stop blacklist snd-usb-audio
-
-	* standalone/man/C/man8/drakconnect.8: typo fixes
-
-	* drakxtools.spec: 10.1-15mdk
-	10.1-14mdk
-	10.1-13mdk
-
-	* detect_devices.pm: perl_checker cleanup
-
-2004/10/01  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: revert part of the commit that was not done on purpose
-	(nb: don't modify rpmsrate *after* running clean-rpmsrate)
-
-	* pkgs.pm: fix logging rpmsrate_flags_chosen
-
-	* share/compssUsers.pl, share/compssUsers-powerpack.pl,
-	share/compssUsers-discovery.pl, share/compssUsers-powerpackplus.pl:
-	dynamically choose the compssUsers based on meta_class, so now we have
-	only one compssUsers.pl
-
-	* install2.pm: 
-	  - prosuite is now named powerpackplus
-	  - simplify the code searching for the meta_class
-	fix logging rpmsrate_flags_chosen
-
-2004/09/30  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: 1612: Edit selected server
-
-2004/09/30  marco
-
-	* share/po/it.po: fix
-
-2004/09/30  Thomas Backlund  <tmb at mandrake.org>
-
-	* share/po/fi.po: Updated translations, 100% translated, was 17 fuzzy, 78
-	untranslated.
-
-2004/09/30  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/compssUsers.powerpack, share/rpmsrate, share/compssUsers.pl,
-	share/compssUsers-discovery.pl, share/compssUsers.server,
-	share/compssUsers.desktop, share/compssUsers-powerpack.pl,
-	share/compssUsers-powerpackplus.pl: Update
-
-2004/09/30  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/net_applet: 
-	  - Numeric comparisons
-
-2004/09/30  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/09/30  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: 1425:WARNING: this device
-
-2004/09/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* authentication.pm: removed "\t" and "\n" out of translatable strings to
-	avoid useless
-	duplication; fixed English typographic errors (don't put spaces
-	before colons!).
-
-	* share/po/hr.po, share/po/sv.po: updated pot file
-	updated pot file
-	updated Croatian and Swedish files
-
-	* share/po/ja.po: updated po file
-	updated pot file
-	updated pot file
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/be.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-	updated pot file
-
-2004/09/30  Pixel  <pixel at mandrakesoft.com>
-
-	* lvm.pm: don't die when device-mapper is missing (occurs on 2.4 kernel)
-	(bugzilla #11834)
-
-	* authentication.pm: kinds() must return all kinds
-	only allow Active Directory for the corporate product
-	revert enhancement commit since we are in deep freeze
-
-	* standalone/drakauth, install_steps_interactive.pm: only allow Active
-	Directory for the corporate product
-
-2004/09/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: typo fix
-	list tablets too with mice
-	use a distinct icon for UPS devices in harddrake GUI
-	fix UPS devices listed in both "UPS" and "unknown" classes
-	list all mice and keyboards (thus lowering unknown hardware in
-	hwdb-clients)
-
-	* lang.pm (configure_kdeglobals) set KDE in m17n emvironment if needed
-
-	* drakxtools.spec: split localedrake menu entry in two ones:
-	  - one for user config
-	  - one for system (embedded in mcc)
-	add one missing log in 10.1-12mdk
-	10.1-12mdk
-
-	* share/po/br.po: translate reverted messages so that they got smoothly
-	uncommented once
-	drakauth changes are merged back after mdk10.1 release
-	update
-
-	* standalone/icons/harddrake2/ups.png: use a distinct icon for UPS devices
-	in harddrake GUI
-
-	* detect_devices.pm (getUPS) provide more data on UPS (arnaud quette)
-	(getInputDevices) introduce it in order to list input devices
-
-2004/09/30  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: Remove ssl config in ldap
-	Add pam_mkhomedir for ldap
-
-2004/09/29  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_monitor: check every 5 seconds (instead of 20) for new or
-	disconnected interfaces (#11780)
-
-2004/09/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/es.po: corrected typo
-
-2004/09/29  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm: 
-	  - disable the new gtk smart search which display an entry box
-	  - fix return value of key_press_event for some cases
-	(otherwise arrow keys do not work)
-
-2004/09/29  rcasha
-
-	* share/po/mt.po: var
-
-2004/09/29  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2004/09/29  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: Add more new entry for LDAP
-
-2004/09/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/es.po: corrected typo
-
-2004/09/29  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/raw.pm, fsedit.pm: don't die when failing to open a
-	device (to get its geometry), skip it instead
-	(as used to be done before partition_table::raw::get_geometries() was
-	introduced)
-
-	* interactive/gtk.pm: 
-	  - disable the new gtk smart search which display an entry box
-	  - fix return value of key_press_event for some cases
-	(otherwise arrow keys do not work)
-
-	* any.pm: add raid-extra-boot=mbr when installing on mdX (bugzilla #11699)
-
-	* modules.pm: fix titi sux
-
-	* install_steps.pm: ensure gdk loaders, gtk immodules and pango modules
-	lists are correct
-
-2004/09/29  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: install_urpmi now writes a names file for each media
-
-2004/09/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm (write) fix setting fonts at install time
-
-	* modules.pm (write_preload_conf) simplify
-	(write_preload_conf) preload nvram on laptops
-
-	* standalone.pm (version) print translated usage message (#5657)
-
-	* share/po/br.po: update
-
-2004/09/28  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: test if IP address is already used for static
-	interfaces
-	(do not test for sagem DSL devices since it may use many ifcfg files)
-
-2004/09/28  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: More logs on install_urpmi
-
-2004/09/28  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2004/09/28  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: madwifi_pci => ath_pci
-
-2004/09/28  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/install_bootloader: handle /etc/mandrakelinux-release
-
-	* Xconfig/xfree.pm: use Driver "keyboard" instead of "Keyboard" (for Xorg
-	6.8)
-
-	* install_steps.pm, printer/main.pm, standalone/printerdrake,
-	printer/printerdrake.pm, install_steps_interactive.pm: 
-	  - make printer::printerdrake::install_spooler() work with an optional
-	$in
-	  - many functions now take $security (which used to be taken from $in
-	during install)
-	  - fix some functions with empty prototype but still using a parameter
-	  - remove some unused variable
-	  - rename some $_foo vars to $foo since those vars are used
-	  - add some undef to some function calls to be minimally perl_checker
-	compliant
-	  - perl_checker compliant optional parameters in
-	start_spooler_on_boot(), install_spooler()
-
-2004/09/28  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: More logs on install_urpmi
-
-2004/09/28  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm, printer/main.pm, standalone/printerdrake,
-	printer/printerdrake.pm, install_steps_interactive.pm: 
-	  - make printer::printerdrake::install_spooler() work with an optional
-	$in
-	  - many functions now take $security (which used to be taken from $in
-	during install)
-	  - fix some functions with empty prototype but still using a parameter
-	  - remove some unused variable
-	  - rename some $_foo vars to $foo since those vars are used
-	  - add some undef to some function calls to be minimally perl_checker
-	compliant
-	  - perl_checker compliant optional parameters in
-	start_spooler_on_boot(), install_spooler()
-
-2004/09/27  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/tools.pm: I sux, fix priority
-	(bg_command_as_root) use kdesu in kde
-	(get_default_gateway_interface) try to detect default connection in
-	this order : adsl > isdn > modem > ethernet
-
-	* mouse.pm: use input/mice instead of psaux for synaptics touchpads
-	(#11771)
-	(input/mice won't work with 2.4 kernels, but it doesn't matter since
-	the config file is rewritten at boot on major kernel change, and
-	synaptics devices are not configured for 2.4 kernels)
-
-	* network/netconnect.pm: ask to connect for isdn_external too
-	don't scramble $netcnx->{type}
-	ask to connect for modem/isdn connections too (crappy fix, this needs
-	to be redesigned once 10.1 is out)
-	we really support all linmodems (including Hsf and Hcf ones) with 2.6
-	kernels
-
-2004/09/27  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/lvm_PV.pm: fix typos
-	simplify and handle LVM2, *but* since creating a LVM2 PV on a non
-	partitioned
-	drive doesn't modify the MBR, it won't help if the MBR is empty or a
-	valid dos
-	partition table, since those are checked first... but i won't change
-	this so
-	late in the release cycle
-
-2004/09/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm: fix last commit
-
-	* standalone/drakperm (get_user_or_group) list users rather than groups
-	when requested for
-	(anthill #1161)
-
-2004/09/27  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* share/rpmsrate.corpo-server: mandrakegalaxy
-
-	* share/rpmsrate.corpo-desktop: clean-ups (factor out) + fixes for lib64
-	packages
-
-2004/09/27  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: we really support all linmodems (including Hsf
-	and Hcf ones) with 2.6 kernels
-
-2004/09/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-
-	* share/po/bn.po: updated Bengali and Ukrainian files
-
-	* share/po/uk.po: updated Ukrainian file
-	updated Bengali and Ukrainian files
-
-	* lang.pm: fixed KDE font names to match currently shiped Xfs font names
-
-2004/09/27  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/lvm_PV.pm: fix typos
-	simplify and handle LVM2, *but* since creating a LVM2 PV on a non
-	partitioned
-	drive doesn't modify the MBR, it won't help if the MBR is empty or a
-	valid dos
-	partition table, since those are checked first... but i won't change
-	this so
-	late in the release cycle
-
-	* fs.pm: fix typo
-
-	* partition_table/dos.pm: fail if legacy_sectors_per_track or
-	legacy_max_head doesn't exist instead of returning garbage (bugzilla
-	#11738)
-	perl_checker compliance
-	don't call compute_nb_cylinders() before checking {sectors} and {heads}
-	are valid
-
-	* pkgs.pm, install2.pm: better logging
-
-	* Makefile: remove from perl-Gtk2 directories from /tmp/list to have less
-	warnings
-
-2004/09/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm: fix last commit
-
-	* standalone/drakperm (get_user_or_group) list users rather than groups
-	when requested for
-	(anthill #1161)
-
-2004/09/27  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate.corpo-server, share/rpmsrate.corpo-desktop: add ximian
-	connector with evolution and change mdkonline to mdkonline-backend
-
-2004/09/26  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: perl-install:1310
-	Manual choice
-
-2004/09/26  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_monitor: I am stupid, start when asked to start, stop
-	when asked to stop
-
-	* standalone/net_applet: fix again running processes detection
-	(go2state) do not destroy/re-create menu if state hasn't changed, or
-	else the menu may disappear without any reason
-
-	* standalone/drakroam (ConnectNow) specify device to iwconfig when
-	applying settings (partial fix for #11279)
-
-2004/09/26  rcasha
-
-	* share/po/mt.po: var
-
-2004/09/25  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 1283
-	The most common
-
-2004/09/24  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* install_steps.pm: Mandrakelinux
-
-	* share/rpmsrate: slmodem-kernel and bluez-utils
-
-2004/09/24  Pixel  <pixel at mandrakesoft.com>
-
-	* printer/printerdrake.pm: don't ask when $in is not set in
-	security_check()
-
-	* install_steps_interactive.pm: oops, i missed a ->cleanupPrinter here.
-	inline it here too
-	install_steps must not call a method only defined in
-	install_steps_interactive, inline it
-
-	* standalone/bootloader-config: fix typos in usage
-
-	* install_steps.pm: install_steps must not call a method only defined in
-	install_steps_interactive, inline it
-
-	* fsedit.pm: increase the max size of the swap
-
-2004/09/24  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-	* DrakX
-
-2004/09/24  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Fix field name
-	Remove dead code
-	Better handling of relative paths
-	Ask only once for a supplementary CD
-	Fix 10.0-style paths
-
-	* pkgs.pm: Save hdlists and synthesis as user root
-	Remove unused code
-
-2004/09/24  tsdgeos
-
-	* share/po/ca.po: Small catalan updates
-
-2004/09/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: do not disable ifplugd support for wireless cards
-
-	* standalone/drakups (add_device_wizard) refix list refreshing on UPS
-	adding
-
-	* drakxtools.spec: fix 10.1-11mdk's changelog
-	10.1-11mdk
-
-2004/09/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakupdate_fstab: allow SYNC=no option in
-	/etc/sysconfig/dynamic
-
-	* network/modem.pm (ppp_configure) add a specific udev script in addition
-	to the udev
-	rules file to create /dev/modem (ttySL0 is a symlink, udev won't be
-	called when it's created)
-
-	* network/netconnect.pm: install kernel packages for winmodems
-
-	* network/adsl.pm (adsl_probe_info) fix old typo, do not reset vpi and vci
-	if vpi is
-	zero
-
-2004/09/23  Pixel  <pixel at mandrakesoft.com>
-
-	* install_interactive.pm: call fsedit::auto_allocate() with
-	$o->{partitions} so be able to fix a partitioning scheme in a defcfg
-
-2004/09/23  rcasha
-
-	* share/po/mt.po: var
-
-2004/09/23  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* Makefile.config, Makefile: Introducing TMPDIR
-
-	* install_any.pm: Missing bit from the trunk
-
-2004/09/23  rstandtke
-
-	* share/po/de.po: some additions and fixes
-
-2004/09/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: do not install scim for hindic (native keyboards're
-	availlable)
-	gives a change to be on CDs to skim
-
-	* share/po/br.po: update
-
-	* lang.pm: add support for SKIM IM
-	install x-unikey for vietnamese (aka sync with share/rpmsrate)
-	use Sazanami Gothic for everything in japanese (Yukiko Bando)
-
-2004/09/22  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_monitor: simplify
-
-	* network/adsl_consts.pm: rename "|T�l�2 128k " as "|T�l�2" so that users
-	don't choose a random
-	provider with wrong vci/vpi settings
-
-	* network/netconnect.pm: use ttySL0 for slmodem, so that a symlink to
-	/dev/modem is done (#8947
-	again)
-
-2004/09/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-	* share/po/ja.po: updated Japanese file
-
-2004/09/22  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/dos.pm: remove the backtrace
-	more logging
-
-	* install2.pm: don't set {meta_class} from file VERSION when it is already
-	given on cmdline
-
-	* fsedit.pm: fix an old ugly typo
-
-	* partition_table.pm: better logging
-
-	* devices.pm: module aes is now named aes-i586 (bugzilla #11588)
-
-	* lvm.pm: call pvremove on every PVs when destroying a VG (to clear the
-	LVM2 magic) (bugzilla #11579)
-
-	* fs.pm: silently ignore encrypted filesystems with no encrypt_key
-	don't add /dev/pts line in fstab anymore (it's done in initrd and udev)
-
-2004/09/22  rcasha
-
-	* share/po/mt.po: var
-
-2004/09/22  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: New method
-	selectSupplMedia
-
-	* Makefile: Separate mdkinst_stage2 step in makefile
-
-	* pkgs.pm: Don't read packages twice
-	Fix variable name
-	Handle reading multiple "hdlists" files (for supplementary media)
-	More CD�rom mountpoint flexibility
-	Better error reporting with rpm installation failures
-	Always return a hashref from pkgs::packageMedium()
-
-	* install_any.pm: A trimmed-down version of the supplementary media
-	handling routine of
-	10.1 community. It handles only supplementary CDs.
-	Selection of supplementary media is now a method.
-	Backport utility functions from 10.1
-	Cope with different cd-rom mountpoints
-
-2004/09/22  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2004/09/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: before exclamation marks, ellipsises, question marks and
-	colons:
-	  - replace spaces by non breaking spaces where appropriate
-	  - add missing spaces
-
-	* share/po/fr.po: fix badly phrased translation
-	before exclamation marks, ellipsises, question marks and colons:
-	  - replace spaces by non breaking spaces where appropriate
-	  - add missing spaces
-	fix a translation
-
-2004/09/21  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/lpi.png, share/advertising/list-pwp,
-	share/advertising/lpi.pl, share/advertising/list-dwd,
-	share/advertising/list-dis, share/advertising/list-ppp: Add LPI
-	advertisement
-
-2004/09/21  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/09/21  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/cardmgr.c,
-	mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/yacc_config.h,
-	mdk-stage1/pcmcia_/cs_types.h, mdk-stage1/pcmcia_/vg468.h,
-	mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/i82365.h,
-	mdk-stage1/pcmcia_/driver_ops.h, mdk-stage1/pcmcia_/cirrus.h: clean-up,
-	merge, fix pcmcia subsystem to make it work on x86_64
-
-	* mdk-stage1/init.c: dirty little hack from pixel/gc to let mdk stage1
-	work with newer kernels
-	("testing" variable is supposedly obsolete btw)
-
-	* mdk-stage1/rescue-gui.c: make it possible to restore windows boot loader
-	on x86_64 too
-
-	* share/rpmsrate: rebreakify, tv likes it
-	  - use correct name for mandrakegalaxy
-	  - install cxoffice if available
-	  - move rp-pppoe to appropriate location
-
-	* rescue/list.x86_64: add grub stuff to rescue
-
-	* bootloader.pm: run grub installation program in chroot so that to avoid
-	weird pbs at times
-
-	* mdk-stage1/stage1.c: same dirtly little hack (a cleanup actually)
-
-	* share/list: add missing gtk module (im-cedilla), arrangements for new
-	pango
-
-	* mdk-stage1/Makefile: pcmcia works on x86_64 too, update stage1 build for
-	10.0
-
-	* mdk-stage1/dietlibc/include/sys/io.h: define io ports on x86_64 too for
-	pcmcia stuff
-
-2004/09/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-2004/09/21  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/main.pm: allow ignoring X config file when it contains errors
-
-	* mouse.pm: don't allow a broken X configuration to break mouse
-	configuration
-
-2004/09/21  Tibor Pittich  <Tibor.Pittich at phuture.sk>
-
-	* share/po/sk.po: updated slovak translation
-
-2004/09/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	typo fix
-
-2004/09/21  Warly  <warly at mandrakesoft.com>
-
-	* pkgs.pm: temporary workarround to fix extra CD
-
-	* install_steps_gtk.pm: do not display workstation entries in corporate
-	server
-
-	* share/rpmsrate, share/compssUsers.corpo-server,
-	share/rpmsrate.corpo-server, share/po/DrakX.pot,
-	share/rpmsrate.corpo-desktop, share/advertising/dwd-01.pl,
-	share/themes-corporate.rc, share/list, share/po/fr.po: Added some
-	corporate specific changes
-
-	* install_steps_interactive.pm: Display group selection in corporate
-
-	* any.pm: do not use default autologin in corporate
-
-	* Makefile: revert wrongly uploaded Makefile
-	Added some corporate specific changes
-
-	* install_gtk.pm: use corporate gtk theme in corporate
-
-2004/09/21  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic translation
-	Arabic translation
-
-2004/09/20  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_conf_backend) do not let speedtouch-start launch
-	connection
-
-	* network/network.pm: more zeroconf fixes (zcip isn't a service, stop
-	tmdns service if
-	zeroconf is disabled, check tmdns init file in prefix/etc)
-
-	* network/netconnect.pm: do not write config two times for lan connections
-
-2004/09/20  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm, devices.pm, fs/type.pm, fs/mount_options.pm,
-	install_steps.pm, standalone/drakupdate_fstab, install_any.pm,
-	install_steps_interactive.pm, partition_table.pm: 
-	  - add field {part_number} for partitions
-	(handle it in subpart_from_wild_device_name(), partition_table::read())
-	  - create migrate_device_names() to handle the change of device names
-	when
-	  changing kernel&modules (eg: hde->hda or hda->sda)
-	  - change prototype of install_any::use_root_part()
-	  (prefix is dropped, optional $in is added)
-	  - create fs::type::can_be_this_fs_type() and use it
-	  - create devices::part_number() and devices::part_prefix() and use
-	them
-
-	* fs.pm: perl_checker compliance
-	  - add field {part_number} for partitions
-	(handle it in subpart_from_wild_device_name(), partition_table::read())
-	  - create migrate_device_names() to handle the change of device names
-	when
-	  changing kernel&modules (eg: hde->hda or hda->sda)
-	  - change prototype of install_any::use_root_part()
-	  (prefix is dropped, optional $in is added)
-	  - create fs::type::can_be_this_fs_type() and use it
-	  - create devices::part_number() and devices::part_prefix() and use
-	them
-
-2004/09/20  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm: Fix supplementary CDs with any kind of media
-
-2004/09/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* security/help.pm: add translator hints; real fix will be in mdk10.2:
-	s!N("(.*?) \"(ALL)\" (.*?)"!N("\1 %s \3", N("\2"))! and the like
-
-2004/09/20  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_monitor: remove connection time timer if connection fails
-	(fix #11590)
-
-	* network/adsl.pm (adsl_conf_backend) use avmadsl option for capi cards to
-	use settings
-	generated by drdsl
-
-	* network/netconnect.pm: do not write config two times for lan connections
-	move "Start at boot" step for lan-like adsl/cable connections
-
-	* network/network.pm: more zeroconf fixes (zcip isn't a service, stop
-	tmdns service if
-	zeroconf is disabled, check tmdns init file in prefix/etc)
-
-2004/09/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/da.po: merged with current pot file
-
-2004/09/20  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm, devices.pm, fs/type.pm, fs/mount_options.pm,
-	install_steps.pm, standalone/drakupdate_fstab,
-	install_steps_interactive.pm, partition_table.pm: 
-	  - add field {part_number} for partitions
-	(handle it in subpart_from_wild_device_name(), partition_table::read())
-	  - create migrate_device_names() to handle the change of device names
-	when
-	  changing kernel&modules (eg: hde->hda or hda->sda)
-	  - change prototype of install_any::use_root_part()
-	  (prefix is dropped, optional $in is added)
-	  - create fs::type::can_be_this_fs_type() and use it
-	  - create devices::part_number() and devices::part_prefix() and use
-	them
-
-	* fs.pm: perl_checker compliance
-	  - add field {part_number} for partitions
-	(handle it in subpart_from_wild_device_name(), partition_table::read())
-	  - create migrate_device_names() to handle the change of device names
-	when
-	  changing kernel&modules (eg: hde->hda or hda->sda)
-	  - change prototype of install_any::use_root_part()
-	  (prefix is dropped, optional $in is added)
-	  - create fs::type::can_be_this_fs_type() and use it
-	  - create devices::part_number() and devices::part_prefix() and use
-	them
-	  - don't use fs::get_info_from_fstab() in install_any::use_root_part()
-	to be able to handle
-	  renamed devices
-	  - fs::get_info_from_fstab() doesn't take a prefix anymore
-	  - small perl_checker fix in install_any.pm
-
-	* install_any.pm: 
-	  - add field {part_number} for partitions
-	(handle it in subpart_from_wild_device_name(), partition_table::read())
-	  - create migrate_device_names() to handle the change of device names
-	when
-	  changing kernel&modules (eg: hde->hda or hda->sda)
-	  - change prototype of install_any::use_root_part()
-	  (prefix is dropped, optional $in is added)
-	  - create fs::type::can_be_this_fs_type() and use it
-	  - create devices::part_number() and devices::part_prefix() and use
-	them
-	  - don't use fs::get_info_from_fstab() in install_any::use_root_part()
-	to be able to handle
-	  renamed devices
-	  - fs::get_info_from_fstab() doesn't take a prefix anymore
-	  - small perl_checker fix in install_any.pm
-
-	* standalone/drakboot, network/tools.pm, standalone/diskdrake,
-	standalone/bootloader-config: 
-	  - don't use fs::get_info_from_fstab() in install_any::use_root_part()
-	to be able to handle
-	renamed devices
-	  - fs::get_info_from_fstab() doesn't take a prefix anymore
-	  - small perl_checker fix in install_any.pm
-
-2004/09/20  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Fix typo
-
-	* pkgs.pm: Fix supplementary CDs with any kind of media
-
-	* install_any.pm: Remove no longer necessary hack.
-
-2004/09/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakups (add_device_wizard) default to automatic detection
-
-	* share/po/br.po: update
-
-2004/09/19  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/09/19  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 1210
-	Circular mounts
-
-2004/09/19  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates (ugh!)
-	gi/perl-install/share/po/da.po
-	Updates
-	gi/perl-install/share/po/da.po
-	updates
-	gi/perl-install/share/po/da.po
-
-2004/09/18  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-	updates
-	gi/perl-install/share/po/da.po
-	updates
-	gi/perl-install/share/po/da.po
-
-2004/09/17  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-	Updates
-	soft/drakbt/po/da.po soft/drakpxelinux/po/da.po
-	gi/perl-install/share/po/da.po
-
-2004/09/17  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/service_harddrake: update iftab when new ethernet devices are
-	detected
-	probe firewire and pcmcia network devices too
-
-	* network/ethernet.pm (configure_eth_aliases) don't write aliases for
-	pcmcia cards but
-	remove them, or else the pcmcia service won't be started correctly
-	(the ethernet module being loaded, pcmcia_core would be loaded too,
-	and the pcmcia service would think it is already started ...)
-	(configure_eth_aliases) kill code that can't do anything good
-	(remove_alias isn't intended to be used with the module name)
-
-	* network/adsl.pm (adsl_conf_backend) make sure the speedtch kernel module
-	won't be hidden
-
-	* network/network.pm (configureNetwork2) really enable zeroconf if
-	zeroconf is requested
-	(configureNetwork2) write blank zeroconf hostname if zeroconf is
-	disabled, else drakconnect will assume it is enabled
-	(configureNetwork2) use services do disable zeroconf, do not disable
-	if it doesn't exist (to avoid warnings in console)
-
-2004/09/17  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/dos.pm, partition_table/raw.pm, fsedit.pm: try to get
-	geometry from EDD
-
-2004/09/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakups: perl_checker cleanup
-	remove debug message :-)
-	refresh UPS list when adding a new UPS though the add wizard
-	(add_device_wizard) fix automatically detect/add an UPS
-
-	* share/rpmsrate: install NUT for "American Power Conversion|Back-UPS Pro
-	500" too
-
-	* drakxtools.spec: 10.1-10mdk
-
-2004/09/16  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: jorge
-
-2004/09/16  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: stop capi service before new config is written so that
-	capiinit can unload the old driver
-
-	* network/isdn.pm: stop capi service before new config is written so that
-	capiinit can unload the old driver
-	make isdn over capi work again
-
-	* network/netconnect.pm: don't support all slmodem cards, our agreement
-	forbid it :-/
-	do not ask "capidrv or capidrv ?" ...
-	make isdn over capi work again
-
-	* share/rpmsrate: do not install isdn-light, it's unused, unsupported, and
-	breaks
-	isdn4net
-
-	* network/network.pm (read_all_conf) use network::tools to probe
-	connection type
-
-2004/09/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* share/po/es.po: fixed typo
-	updated pot file
-
-	* network/netconnect.pm: fixed typo (no spaces before question marks in
-	English)
-
-2004/09/16  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/draksplash2: add as a comment the "convert" command
-	imagemagick can do what gimp can't: reduce the number of colors while
-	using a fixed treedepth different than 24bpp (we want 6*3 = 18bpp)
-	display the stepping effect
-
-	* detect_devices.pm: C3 has "cpu family" == 6, so now also checking that
-	cmov flag is available to say we have a i686
-
-	* install_steps_gtk.pm: on a test here, a "Server died" occured whereas
-	the server is running.
-	i think it can occur if the server is in fact not even started. Trying
-	to handle this case
-
-2004/09/16  rcasha
-
-	* share/po/mt.po: var
-
-2004/09/16  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_gtk.pm: Kludgy fix for bug 11558 : sometimes when
-	restarting the installer at the
-	step where partitions are read, it'll be needed to reaload the rpmsrate
-	and compssUsers.pl to avoid a crash a bit later.
-
-	* install_any.pm: Kludgy fix for bug 11558 : sometimes when restarting the
-	installer at the
-	step where partitions are read, it'll be needed to reaload the rpmsrate
-	and compssUsers.pl to avoid a crash a bit later.
-	Better retry on error handling for supplementary media
-
-	* share/list: Include locale.pm in the install, since ugtk2 now uses it.
-
-2004/09/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	update
-
-	* standalone/drakups (add_device_wizard) fix device list in wizard
-	perl_checker cleanups
-
-2004/09/15  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: do not add prefix in path given to ensure_is_installed
-	! (i.e. replace untested code with untested code), fix #11547 and more
-	add comment
-	(adsl_conf_backend) don't create empty pppoe.conf if the package isn't
-	installed
-	load modules and run start programs in standalone too, so that it will
-	work even if the packages have just been installed
-
-	* network/netconnect.pm: install unicorn-kernel package if available
-	add "Unlisted - edit manually" entry in modem provider list (fix #11549)
-	do not add prefix in path given to ensure_is_installed ! (i.e. replace
-	untested code with untested code), fix #11547 and more
-
-	* detect_devices.pm (getBewan) use more permissive regexp for PCI modem,
-	description in
-	pcitable may change
-
-	* network/isdn.pm: do not add prefix in path given to ensure_is_installed
-	! (i.e. replace untested code with untested code), fix #11547 and more
-
-2004/09/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uz.po, share/po/uz@Latn.po: updated Uzbek files
-
-	* share/po/it.po: updated Italian file
-
-	* keyboard.pm: removed "caps:shift" it never fully solved the problem of
-	turkish keyboards
-	anyway; and a much better solution is done on newer keyboard maps
-	in xorg package.
-
-2004/09/15  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: explicit scalar false value (otherwise it gives () in list
-	context)
-
-	* bootloader.pm: no need to require pkgs (and it makes bootloader-config
-	some break when removing entries)
-
-2004/09/15  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Use radio buttons in media selection (wildman).
-	perl_checker compliance.
-
-2004/09/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakbackup (interactive_mode_box) better make parameter
-	optionnal
-
-	* share/po/bn.po, share/po/ms.po, share/po/gl.po, share/po/th.po,
-	share/po/et.po, share/po/hr.po, network/netconnect.pm, share/po/be.po,
-	share/po/ko.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/ar.po, share/po/ltg.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, network/adsl.pm,
-	share/po/lv.po, share/po/hu.po, share/po/ru.po, share/po/sl.po,
-	share/po/nn.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/mn.po, share/po/am.po, share/po/lt.po, share/po/tg.po,
-	share/po/bs.po, share/po/fur.po, share/po/wa.po, share/po/hi.po,
-	share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/ta.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/cs.po,
-	share/po/uz@Latn.po: fix PPPoA case
-
-	* modules/interactive.pm (load_category__prompt) fix spacing in module
-	list
-
-	* share/po/br.po: update
-	update
-	update
-	update
-
-	* drakxtools.spec: last minute changes in 10.1-9mdk
-	10.1-9mdk
-	fix typo in 10.1-6mdk's and 10.1-7mdk's changelog
-
-	* share/po/sk.po, share/po/pt_BR.po, share/po/ja.po, share/po/sv.po,
-	share/po/sr.po, share/po/da.po, share/po/ky.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/fa.po, share/po/id.po, share/po/tr.po,
-	share/po/mk.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/tl.po, share/po/el.po, share/po/bg.po: unfuzzy a few sagem
-	strings
-	fix PPPoA case
-
-	* share/po/cy.po: update (note that my welsh needs to be reviewed as well
-	as my 2004/08/13 update)
-	fix PPPoA case
-
-	* ugtk2.pm (get_text_coord) fix wrapping for CJ when mixed with english
-	strings
-	(eg: cuted "Mandrakesoft" word)
-	(get_text_coord) kill unused character
-
-	* install_steps_gtk.pm (installPackages) kill unused variable
-
-2004/09/15  vljubovic
-
-	* share/po/bs.po: A small fix
-
-2004/09/15  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: add dkms-minimal in INSTALL
-
-2004/09/15  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic translation
-
-2004/09/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uz.po, share/po/uz@Latn.po: updated Uzbek files
-
-	* share/po/it.po: updated Italian file
-
-2004/09/14  Olivier Blin <oblin at mandrakesoft.com>
-
-	* install_steps.pm (configureNetwork) commit forgotten patch (I sux)
-
-	* detect_devices.pm (getModem) use network/slmodem category
-
-	* install_steps_interactive.pm (configureNetwork) load all network modules
-	before network
-	auto-configuration, so that all interfaces will be available and
-	written in iftab
-
-	* network/isdn.pm: adapt to kernel packages naming
-
-	* network/netconnect.pm: allow to configure slmodem
-
-2004/09/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-
-	* lang.pm: comment for default:LTR
-	comment on default:LTR
-
-	* share/po/it.po, share/po/ms.po, share/po/es.po, share/po/am.po,
-	share/po/fur.po, share/po/fi.po, share/po/pt.po: corrected default:LTR
-	entries
-
-	* share/po/ar.po: corrected "<control>X" strings
-
-	* share/po/bn.po: corrected "<control>X" strings
-	corrected default:LTR entries
-
-2004/09/14  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm, fsedit.pm, fs/mount_options.pm,
-	partition_table.pm: 
-	  - ensure {is_removable} field is there for created partitions, not
-	only existing partitions
-	  - it breaks Create(), fixing
-
-2004/09/14  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* authentication.pm: Fix net join syntax for winbind setup.
-
-2004/09/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: fix typo in 10.1-7mdk's changelog
-	10.1-8mdk
-	10.1-7mdk
-	package man pages
-
-	* standalone/service_harddrake: adapt to new nvidia driver location
-
-	* any.pm (selectCountry) offer to select IM if language has one
-	preselected
-	(else option is only availlable in advanced mode)
-
-	* Makefile.drakxtools, Makefile: package man pages
-
-	* standalone/man/C/man8/drakconnect.8: remove reference to ipchains
-	add drakconnect man page
-
-	* network/ethernet.pm (get_eth_cards) document it somewhat
-	(get_eth_cards_names) let detect_devices->firewire_probe() set the
-	device description
-	(get_eth_cards) workaround buggy eth1394 that returs a bogus driver
-	name for the GDRVINFO command of the ETHTOOL ioctl returns
-	(get_eth_cards_names) set a sensible name for firewire network
-	adapters in order to make GUIes look more user friendly
-
-2004/09/14  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/isdn.pm: adapt to kernel packages naming
-	(write_config) remove unused parameter
-	(setup_capi_conf) use capi4linux file to detect isdn4k-utils package
-	(setup_capi_conf) install firmware if needed
-	(setup_capi_conf) do not do dsl-specific stuff here
-
-	* network/netconnect.pm: allow to configure slmodem
-	(get_eth_cards_names) remove unused parameter
-	(configureNetwork2) configure eth aliases, needs modules_conf
-	cleanup, remove unused parameters and comments
-	support dsl over capi
-
-	* network/network.pm (configureNetwork2) configure eth aliases, needs
-	modules_conf
-
-	* standalone/drakconnect (get_eth_cards_names) remove unused parameter
-	(configureNetwork2) configure eth aliases, needs modules_conf
-	remove unused parameter
-
-	* network/adsl.pm (adsl_conf_backend) move isdn4k-utils installation here
-	(adsl_conf_backend) remove ifcfg-sagem
-	(adsl_conf_backend) support dsl over capi
-
-	* detect_devices.pm (getModem) use network/slmodem category
-
-	* network/shorewall.pm, standalone/drakgw (get_eth_cards_names) remove
-	unused parameter
-
-	* do_pkgs.pm (check_kernel_module_packages) make ext package optionnal
-
-	* network/ethernet.pm (get_eth_cards_names) remove unused parameter
-	(configureNetwork2) configure eth aliases, needs modules_conf
-	(configure_eth_aliases) errm, use modules_conf
-	do not configure eth aliases in various places, move aliases
-	configuration code from get_eth_cards_names to configure_eth_aliases
-
-2004/09/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/es.po, share/po/ro.po, share/po/gl.po, share/po/fur.po,
-	share/po/wa.po, share/po/pt_BR.po, share/po/ca.po, share/po/eo.po,
-	share/po/fr.po: MandrakeSoft -> Mandrakesoft; Mandrake -> Mandrakelinux
-
-	* share/po/pt.po: MandrakeSoft -> Mandrakesoft; Mandrake -> Mandrakelinux
-	fixed typo
-
-	* share/po/ar.po: updated po file
-
-	* share/po/cs.po: updated Czech po file
-
-2004/09/14  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm, fsedit.pm, fs/mount_options.pm,
-	partition_table.pm: 
-	  - ensure {is_removable} field is there for created partitions, not
-	only existing partitions
-	  - it breaks Create(), fixing
-
-	* detect_devices.pm: get the scsi driver name in field {driver}
-
-2004/09/14  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Apparently perl_checker doesn't like my perfectly
-	sensible perl syntax.
-
-2004/09/14  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* network/smb.pm: syntax changes in winbind smb.conf (errors in
-	/var/log/messages)
-
-	* authentication.pm: Fix net join syntax for winbind setup.
-
-2004/09/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/man/C/man8/drakconnect.8: add drakconnect man page
-
-	* standalone/service_harddrake: space cleanup
-
-	* network/netconnect.pm: upcase acronyms
-
-	* Makefile, Makefile.drakxtools: package man pages
-
-	* standalone/draksec: 
-	  - fix label of entry in help
-	  - move help from tooltips into separate page (#9894)
-	rationale:
-	
-	  - there's already a "help" button that do the same thing as mcc one
-	
-	  - Gtk+ only support tooltips on widgets that have their own X window
-	(which new
-	  GtkComboBox widget has not)
-	
-	  - tooltips are usefull on first run but then are just annoying
-
-	* harddrake/data.pm: detect scanners later so that we filter out bogus usb
-	devices detected
-	by sane_find_scanner
-	detect not yet supported ethernnet cards too
-	(unknown) blacklist more bridges (though f() should already take care
-	of that)
-	detect more bridges and the like
-
-	* network/ethernet.pm (get_eth_cards) document it somewhat
-	(get_eth_cards_names) let detect_devices->firewire_probe() set the
-	device description
-	(get_eth_cards) workaround buggy eth1394 that returs a bogus driver
-	name for the GDRVINFO command of the ETHTOOL ioctl returns
-	(get_eth_cards_names) set a sensible name for firewire network
-	adapters in order to make GUIes look more user friendly
-
-	* standalone/drakTermServ, standalone/drakfont, standalone/drakbackup:
-	sanitize capitale usage on buttons
-
-	* drakxtools.spec: 10.1-7mdk
-	package man pages
-	10.1-6mdk
-	10.1-5mdk
-
-	* scanner.pm (detect) blacklist usb devices that have a driver and that
-	are wrongly
-	detected by sane-find-scanner (scanners are managed by scanner.o
-	module in 2.4.x and through libusb on 2.6.x)
-
-2004/09/14  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: Community 10.1 logo
-
-2004/09/14  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic translation
-
-2004/09/13  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 711
-	Please insert the
-	locally modified
-
-2004/09/13  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/09/13  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/isdn_consts.pm: fix typo
-
-	* network/netconnect.pm: do not auto-select static/dhcp if the provider
-	uses pppoe
-	only write ifcfg-sagem when needed
-	add isdn_driver step to be able to choose between hisax and capi drivers
-
-	* network/isdn.pm (setup_capi_conf) install isdn4k-utils
-	handle capi drivers
-
-	* network/tools.pm (get_default_ippp_interface) use interfaces with true
-	DIAL_ON_IFUP
-
-2004/09/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_interactive.pm: The "choose an update mirror" screen was
-	launched without notice when
-	a supplementary ftp media was selected.
-
-	* install_any.pm: redundant code
-
-2004/09/13  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix crashes in CD/Tape setup.  Fix UI behavior in
-	wizard. (Nicolas Adenis-Lamarre)
-
-2004/09/13  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/09/13  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: simplify
-
-	* Xconfig/card.pm: adapt to new proprietary package naming
-
-	* do_pkgs.pm: 
-	  - simplify ->check_kernel_module_packages, same for install and
-	standalone
-	  - create ->are_available used by ->check_kernel_module_packages
-
-2004/09/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps.pm: Ability to choose from the mirror list when assing an
-	ftp supplementary
-	media. Fix download of hdlists file for ftp supplementary media.
-
-	* install_any.pm: redundant code
-	deselection of found media: don't display twice media from the same
-	installation CD
-	http supplementary media were borked
-	Ability to choose from the mirror list when assing an ftp supplementary
-	media. Fix download of hdlists file for ftp supplementary media.
-
-	* install_steps_interactive.pm: The "choose an update mirror" screen was
-	launched without notice when
-	a supplementary ftp media was selected.
-	Ability to choose from the mirror list when assing an ftp supplementary
-	media. Fix download of hdlists file for ftp supplementary media.
-
-2004/09/13  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix crashes in CD/Tape setup.  Fix UI behavior in
-	wizard. (Nicolas Adenis-Lamarre)
-
-2004/09/13  Till Kamppeter  <till at mandrakesoft.com>
-
-	* Makefile.config: Reverted accidentally uploaded file.
-	Fixed "dynamic()" in scannerdrake to do not contain anything
-	interactive.
-
-	* standalone/scannerdrake: Fixed "dynamic()" in scannerdrake to do not
-	contain anything interactive.
-
-2004/09/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: another typo fix
-	typo fix
-
-	* drakxtools.spec: fix 10.1-3mdk's changelog
-	10.1-4mdk
-
-	* share/po/cy.po: fix draksec entries in welsh
-
-	* share/rpmsrate: fix regexpes
-	fix rpmsrate
-	ltmodem needs ltmodem package
-
-2004/09/13  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/09/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-2004/09/13  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: simplify
-
-	* Xconfig/card.pm: adapt to new proprietary package naming
-
-	* do_pkgs.pm: 
-	  - simplify ->check_kernel_module_packages, same for install and
-	standalone
-	  - create ->are_available used by ->check_kernel_module_packages
-
-2004/09/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: http supplementary media were borked
-	Ability to choose from the mirror list when assing an ftp supplementary
-	media. Fix download of hdlists file for ftp supplementary media.
-
-	* install_steps.pm, install_steps_interactive.pm: Ability to choose from
-	the mirror list when assing an ftp supplementary
-	media. Fix download of hdlists file for ftp supplementary media.
-
-2004/09/13  Till Kamppeter  <till at mandrakesoft.com>
-
-	* Makefile.config: Reverted accidentally uploaded file.
-	Fixed "dynamic()" in scannerdrake to do not contain anything
-	interactive.
-
-	* standalone/scannerdrake: Fixed "dynamic()" in scannerdrake to do not
-	contain anything interactive.
-
-2004/09/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: another typo fix
-	typo fix
-
-	* drakxtools.spec: fix 10.1-3mdk's changelog
-	10.1-4mdk
-
-	* share/po/cy.po: fix draksec entries in welsh
-
-	* share/rpmsrate: fix rpmsrate
-	ltmodem needs ltmodem package
-
-2004/09/13  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/09/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ltg.po, share/po/nb.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* share/po/ar.po: updated pot file
-	updated Arabic file
-
-	* share/po/et.po: updated pot file
-	updated Estonian po file
-
-2004/09/13  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: simplify
-
-	* Xconfig/card.pm: adapt to new proprietary package naming
-
-	* do_pkgs.pm: 
-	  - simplify ->check_kernel_module_packages, same for install and
-	standalone
-	  - create ->are_available used by ->check_kernel_module_packages
-
-2004/09/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps.pm, install_any.pm, install_steps_interactive.pm: Ability
-	to choose from the mirror list when assing an ftp supplementary
-	media. Fix download of hdlists file for ftp supplementary media.
-
-2004/09/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/cy.po: fix draksec entries in welsh
-	  - fix label of entry in help
-	  - move help from tooltips into separate page (#9894)
-	rationale:
-	
-	  - there's already a "help" button that do the same thing as mcc one
-	
-	  - Gtk+ only support tooltips on widgets that have their own X window
-	(which new
-	  GkComboBox widget has not)
-	
-	  - tooltips are usefull on first run but then are just annoying
-
-	* share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/et.po, share/po/hr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/am.po, share/po/ko.po, share/po/sv.po, share/po/pl.po,
-	share/po/he.po, share/po/ca.po, share/po/ar.po, share/po/tg.po,
-	security/help.pm, share/po/ltg.po, share/po/uz.po, share/po/wa.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/pt.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/it.po, share/po/nl.po,
-	share/po/tl.po, share/po/de.po, share/po/eo.po, share/po/bg.po,
-	share/po/lv.po: 
-	  - fix label of entry in help
-	  - move help from tooltips into separate page (#9894)
-	rationale:
-	
-	  - there's already a "help" button that do the same thing as mcc one
-	
-	  - Gtk+ only support tooltips on widgets that have their own X window
-	(which new
-	  GkComboBox widget has not)
-	
-	  - tooltips are usefull on first run but then are just annoying
-
-	* standalone/draksec (set_help_tip) only use on tooltip group
-
-	* standalone/drakbug_report: fix crash
-
-	* share/rpmsrate: fix rpmsrate
-	ltmodem needs ltmodem package
-	install Device-mapper ATARAID tool for software raid (aka bios driven
-	ones)
-	the odds're high we should do this too for sata_promise, sata_sx4 and
-	sx8 SATA
-	drivers.
-	both diskdrake and initscripts now prefer mdadm over raidtools
-
-	* harddrake/data.pm: explain why some hw classes are not probed on
-	bootstrapping
-	move comment where appropriate
-
-2004/09/13  vljubovic
-
-	* share/po/bs.po: Fixing
-
-2004/09/12  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 711
-	No floppy drive
-
-2004/09/12  huftis
-
-	* share/po/nn.po: Fixed a few fuzzy strings.
-
-2004/09/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_TW.po, share/po/az.po, share/po/nl.po: updated Azeri file
-	updated pot file
-
-	* keyboard.pm: disambiguation of keyboard names, so they can be translated
-	differently
-	from language names
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* share/po/it.po: updated Italian file
-	updated pot file
-
-2004/09/12  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-	* DrakX
-
-2004/09/12  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arab ic translation
-
-2004/09/11  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 662
-	You have selected
-
-2004/09/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po: updated Bengali file
-
-	* share/po/fa.po, share/po/ms.po, share/po/sv.po, share/po/he.po,
-	share/po/br.po, share/po/hi.po, share/po/et.po, share/po/zh_TW.po,
-	share/po/tr.po, share/po/pt.po, share/po/ar.po: updated Estonian file;
-	fixed error syntax in Hebrew file;
-	removed non-ascii version of the bootloader message
-
-2004/09/10  (Hilbert) <h at mandrake.org>
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 650
-	You must also
-
-2004/09/10  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: do not ask if network should be started on boot
-	if it has already been
-	asked during pseudo-lan configuration
-
-	* standalone/net_applet: lower refresh timeout to 5 seconds
-	make connect/disconnect buttons useful
-
-2004/09/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: some more XKB keyboard names fixed to match xorg versions
-	fixed compose:rwin (it must be enabled if the key isn't used, and not
-	when the key is already used); and a new keyboard toggle
-	fixed Russian phonetic keyboard layout on xorg
-
-2004/09/10  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: fix choosing bestKernelPackage
-	remove debug code
-
-2004/09/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: one more change in 10.1-3mdk for lord blino
-	10.1-3mdk
-	typo fix in 10.1-0.19mdk's changelog
-	fix 10.1-0.25mdk's changelog
-	10.1-2mdk
-	  - move tools description in proper packages (aka make -newt
-	description somewhat usefull)
-	  - describe missing tools
-	  - sanitize tool names
-
-	* share/po/fr.po: update (how did the drakvpn got fuzzy whereas this tool
-	was left
-	untouched for monthes???)
-
-2004/09/10  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Arabic translation from Arabeyes
-
-2004/09/10  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot (enable_framebuffer) do not kill the whole wizard
-	when embedded
-
-2004/09/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: fixed compose:rwin (it must be enabled if the key isn't
-	used, and not
-	when the key is already used); and a new keyboard toggle
-	fixed Russian phonetic keyboard layout on xorg
-
-	* share/po/it.po: updated Italian file
-
-2004/09/10  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: fix choosing bestKernelPackage
-	remove debug code
-
-	* resize_fat/c_rewritten.xs, c/stuff.xs.pl, xf86misc/main.xs,
-	Newt/Newt.xs: prototypes are dangerous
-
-2004/09/10  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Remove (temporarily, do we hope) the code that re-reads
-	all hdlists when the
-	user has added supplementary media. It doesn't work for now, when the
-	main
-	media is networked and the supplementary media a superset of the main
-	media.
-
-2004/09/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: autoconfigure mice on bootstrapping
-
-	* harddrake/autoconf.pm: cleanups
-	autoconfigure mice on bootstrapping
-
-	* drakxtools.spec: typo fix in 10.1-1mdk's changelog
-	10.1-1mdk
-
-	* share/po/br.po: update
-
-	* standalone/service_harddrake: cleanups
-	perl_checker cleanups
-	autoconfigure mice on bootstrapping
-
-2004/09/10  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot (enable_framebuffer) do not kill the whole wizard
-	when embedded
-
-	* standalone/drakconnect (configure_net) use network::test to test
-	internet connection
-
-	* network/test.pm: fix stupid things
-	fix indentation and CVS Id
-	(update_status) handle decimal ping time with comma instead of dot
-
-2004/09/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po: updated Italian file
-
-2004/09/10  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_gtk.pm: do not display release notes anymore (since it
-	hides advertising...)
-
-	* install_steps_interactive.pm: add button "Release Notes" in the
-	acceptLicense dialog box
-
-	* c/stuff.xs.pl, xf86misc/main.xs, Newt/Newt.xs,
-	resize_fat/c_rewritten.xs: prototypes are dangerous
-
-	* interactive/gtk.pm: for ask_warn with big text, create a bigger window
-	introduce {more_buttons} to allow the "Release Notes" button. ugly, but
-	it works :-(
-
-	* rescue/list: /bin/loadkeys is no more
-
-	* install2.pm: log the {meta_class}
-
-	* ugtk2.pm: create_box_with_title():
-	  - introduce the ugly $o->{box_allow_grow}
-	  - cleanup the usage
-
-2004/09/10  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Remove (temporarily, do we hope) the code that re-reads
-	all hdlists when the
-	user has added supplementary media. It doesn't work for now, when the
-	main
-	media is networked and the supplementary media a superset of the main
-	media.
-
-2004/09/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: autoconfigure mice on bootstrapping
-
-	* harddrake/autoconf.pm: cleanups
-	autoconfigure mice on bootstrapping
-
-	* drakxtools.spec: typo fix in 10.1-1mdk's changelog
-	10.1-1mdk
-
-	* share/po/br.po: update
-
-	* standalone/service_harddrake: cleanups
-	perl_checker cleanups
-	autoconfigure mice on bootstrapping
-
-2004/09/09  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: 
-	  - choose the good kernel for the box
-	  - add recognition of i586-up-1GB
-
-	* c/smp-dmi.c: max() is not defined, inline it
-
-	* install_any.pm: BIGMEM now means >4GB
-
-	* detect_devices.pm: add is_i586() based on "cpu family", hopefully it
-	works for detecting K6 and C3
-
-2004/09/09  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/compssUsers.pl: Fix typo in section title
-
-	* install_steps_interactive.pm: minor fix in last patch
-	Re-read all hdlists in reverse order when there are supplementary media.
-	Don't unselect every single media when doing an installation from iso
-	images.
-
-	* pkgs.pm, install_any.pm: Re-read all hdlists in reverse order when there
-	are supplementary media.
-	Don't unselect every single media when doing an installation from iso
-	images.
-
-2004/09/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.27mdk
-	10.1-0.26mdk
-
-	* any.pm (selectCountry) do not default to per locale default IM.  IM was
-	either setup by drakx or by localedrake.  If the field does not
-	exists, this means the user *decided* to not have an IM.
-	(selectCountry) do not overwrite current IM (why does this only failed
-	with miniChinput???)
-
-	* standalone/localedrake: really reset IM on language switch
-	remove debug message
-	only default to per locale default IM when switching between locales
-
-	* lang.pm (write) fix ENC setting too (like thai IM, it got broken when
-	analyse_locale_name and the like were added it seems)
-	fix thai IM that was broken for ages (but it was disabled in 10.0
-	anyway so ...)
-	fix ENC and locale specific stuff even when IM is disabled (because of
-	thai)
-	simplify ENC setting
-	  - sanitize some variable names
-	  - add/update comments
-	(write) make it a little more readable
-	(write) kill unused variable
-	add a comment about font settings for installer
-	Singapore is en_SG not zh_SG !!!
-	(read) fix chinput identification
-	fix XIM_MODIFIER field for xcin and chinput IM
-
-2004/09/09  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Syn with Arabeyes CVS before a translation that should
-	hopefully happen soon...
-
-2004/09/09  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Up kpilot
-
-2004/09/09  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: Updated POT file
-
-2004/09/09  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* tools/ddcprobe/int10/i10_v86.c: Nuke use of conditional expressions as
-	lvalues
-
-	* tools/ddcprobe/Makefile: Remake x86emu & int10 subdirs if sources have
-	changed
-
-2004/09/09  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* c/smp-dmi.c: add dmi type 6 in detection memory size
-
-2004/09/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/isdn_consts.pm: add @isdn_capi array of cards than can use capi
-	drivers
-
-	* lang.pm: reduce font size in japanese install
-
-2004/09/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/be.po: cyrillic fixes
-
-	* share/po/bs.po, share/po/af.po, share/po/az.po, share/po/am.po,
-	share/po/ar.po: some Mandrake -> Mandrakelinux and MandrakeSoft ->
-	Mandrakesoft fixes
-
-	* share/po/tg.po, share/po/ltg.po, share/po/ru.po, share/po/ro.po,
-	share/po/mt.po, share/po/sr@Latn.po, share/po/it.po, share/po/tl.po,
-	share/po/sr.po, share/po/de.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/el.po, share/po/lv.po: fixed media paths
-
-	* share/po/uk.po: cyrillic fixes
-	fixed media paths
-
-	* share/po/bg.po: some Mandrake -> Mandrakelinux and MandrakeSoft ->
-	Mandrakesoft fixes
-	fixed media paths
-
-2004/09/09  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: 
-	  - choose the good kernel for the box
-	  - add recognition of i586-up-1GB
-
-	* share/rpmsrate: cleanup
-	remove tabulation
-
-	* any.pm: even "lilo -u" can prompt about the "Volume ID" fixing process
-	handles the lilo case where it wants to assign a new Volume ID: prompt
-	the user, then
-	  - if it doesn't want to modify the Volume ID, use static-bios-codes to
-	be able to install lilo
-	  - otherwise call lilo with answer "n" to the question "Is the above
-	disk an NT boot disk?"
-	so that it assigns a new Volume ID
-
-	* c/smp-dmi.c: max() is not defined, inline it
-
-	* bootloader.pm: handle raid-extra-boot (bugzilla #11350)
-	remove unused variable
-	  - handle lilo "static-bios-codes" option
-	  - call lilo with a forced stdin (so that it doesn't read from tty)
-	  - enable calling lilo with a special stdin value
-	help emacs mode
-	fix regexp to work with "linux-2.6.8.1-10mdk"
-	instead of expanding symlinks in any case, only do it when renaming
-	"linux"
-	into the kernel version based label (eg: "2681-10")
-	that way "linux" like entries won't be modified, the way the "linux" is
-	already handled
-
-	* run_program.pm: don't check_prog when the prog is a complex command
-	(containing a pipe)
-	simplify
-	rename $str into $real_name
-	remove redundant code
-
-	* install_any.pm: BIGMEM now means >4GB
-
-	* detect_devices.pm: add is_i586() based on "cpu family", hopefully it
-	works for detecting K6 and C3
-
-2004/09/09  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Grammar fixes
-
-	* install_steps_interactive.pm: minor fix in last patch
-	Re-read all hdlists in reverse order when there are supplementary media.
-	Don't unselect every single media when doing an installation from iso
-	images.
-
-	* pkgs.pm, install_any.pm: Re-read all hdlists in reverse order when there
-	are supplementary media.
-	Don't unselect every single media when doing an installation from iso
-	images.
-
-2004/09/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* any.pm (selectCountry) do not default to per locale default IM.  IM was
-	either setup by drakx or by localedrake.  If the field does not
-	exists, this means the user *decided* to not have an IM.
-	(selectCountry) do not overwrite current IM (why does this only failed
-	with miniChinput???)
-
-	* lang.pm: fix thai IM that was broken for ages (but it was disabled in
-	10.0
-	anyway so ...)
-	fix ENC and locale specific stuff even when IM is disabled (because of
-	thai)
-	simplify ENC setting
-	  - sanitize some variable names
-	  - add/update comments
-	(write) make it a little more readable
-	(write) kill unused variable
-	add a comment about font settings for installer
-	Singapore is en_SG not zh_SG !!!
-	(read) fix chinput identification
-	fix XIM_MODIFIER field for xcin and chinput IM
-	(write) set proper XIM_PROGRAM depending on both encoding and locale
-	(fix chinput configuration that was broken for ages)
-	(set_default_im) really just set default IM and nothing more
-	(write) fix XIM_PROGRAM setting
-	(set_default_im) simplify
-	(IM packages list) when configuring chinput, we need miniChinput (a
-	evolution of chinput that replaced it)
-
-	* share/rpmsrate: install slmodem for ltmodem, slamr, slusb windmodem
-	drivers too
-
-	* standalone/localedrake: really reset IM on language switch
-	remove debug message
-	only default to per locale default IM when switching between locales
-
-	* network/network.pm (read_all_conf) remove spurous character from regexp
-	(read_all_conf) ignore rpm's backups (#10816)
-
-	* resize_fat/c_rewritten.xs, xf86misc/main.xs, Newt/Newt.xs: kill warnings
-
-	* drakxtools.spec: 10.1-0.27mdk
-	10.1-0.26mdk
-	10.1-0.25mdk
-
-2004/09/09  Warly  <warly at mandrakesoft.com>
-
-	* share/compssUsers.pl: Display Development group in the same way as other
-	groups.
-
-2004/09/09  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Up kpilot
-
-2004/09/09  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: Updated POT file
-
-2004/09/09  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* c/smp-dmi.c: add dmi type 6 in detection memory size
-
-2004/09/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/isdn_consts.pm: add @isdn_capi array of cards than can use capi
-	drivers
-
-	* lang.pm: reduce font size in japanese install
-
-2004/09/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/be.po: cyrillic fixes
-
-	* share/po/bs.po, share/po/af.po, share/po/az.po, share/po/am.po,
-	share/po/ar.po: some Mandrake -> Mandrakelinux and MandrakeSoft ->
-	Mandrakesoft fixes
-
-	* share/po/tg.po, share/po/ltg.po, share/po/ru.po, share/po/ro.po,
-	share/po/mt.po, share/po/sr@Latn.po, share/po/it.po, share/po/tl.po,
-	share/po/sr.po, share/po/de.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/el.po, share/po/lv.po: fixed media paths
-
-	* share/po/uk.po: cyrillic fixes
-	fixed media paths
-
-	* share/po/bg.po: some Mandrake -> Mandrakelinux and MandrakeSoft ->
-	Mandrakesoft fixes
-	fixed media paths
-
-2004/09/09  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: 
-	  - choose the good kernel for the box
-	  - add recognition of i586-up-1GB
-
-	* share/rpmsrate: cleanup
-	remove tabulation
-
-	* any.pm: even "lilo -u" can prompt about the "Volume ID" fixing process
-	handles the lilo case where it wants to assign a new Volume ID: prompt
-	the user, then
-	  - if it doesn't want to modify the Volume ID, use static-bios-codes to
-	be able to install lilo
-	  - otherwise call lilo with answer "n" to the question "Is the above
-	disk an NT boot disk?"
-	so that it assigns a new Volume ID
-
-	* c/smp-dmi.c: max() is not defined, inline it
-
-	* bootloader.pm: handle raid-extra-boot (bugzilla #11350)
-	remove unused variable
-	  - handle lilo "static-bios-codes" option
-	  - call lilo with a forced stdin (so that it doesn't read from tty)
-	  - enable calling lilo with a special stdin value
-	help emacs mode
-	fix regexp to work with "linux-2.6.8.1-10mdk"
-	instead of expanding symlinks in any case, only do it when renaming
-	"linux"
-	into the kernel version based label (eg: "2681-10")
-	that way "linux" like entries won't be modified, the way the "linux" is
-	already handled
-
-	* run_program.pm: don't check_prog when the prog is a complex command
-	(containing a pipe)
-	simplify
-	rename $str into $real_name
-	remove redundant code
-
-	* install_any.pm: BIGMEM now means >4GB
-
-	* detect_devices.pm: add is_i586() based on "cpu family", hopefully it
-	works for detecting K6 and C3
-
-2004/09/09  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Grammar fixes
-
-	* install_steps_interactive.pm: minor fix in last patch
-	Re-read all hdlists in reverse order when there are supplementary media.
-	Don't unselect every single media when doing an installation from iso
-	images.
-
-	* pkgs.pm, install_any.pm: Re-read all hdlists in reverse order when there
-	are supplementary media.
-	Don't unselect every single media when doing an installation from iso
-	images.
-
-2004/09/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* any.pm (selectCountry) do not default to per locale default IM.  IM was
-	either setup by drakx or by localedrake.  If the field does not
-	exists, this means the user *decided* to not have an IM.
-	(selectCountry) do not overwrite current IM (why does this only failed
-	with miniChinput???)
-
-	* lang.pm: fix thai IM that was broken for ages (but it was disabled in
-	10.0
-	anyway so ...)
-	fix ENC and locale specific stuff even when IM is disabled (because of
-	thai)
-	simplify ENC setting
-	  - sanitize some variable names
-	  - add/update comments
-	(write) make it a little more readable
-	(write) kill unused variable
-	add a comment about font settings for installer
-	Singapore is en_SG not zh_SG !!!
-	(read) fix chinput identification
-	fix XIM_MODIFIER field for xcin and chinput IM
-	(write) set proper XIM_PROGRAM depending on both encoding and locale
-	(fix chinput configuration that was broken for ages)
-	(set_default_im) really just set default IM and nothing more
-	(write) fix XIM_PROGRAM setting
-	(set_default_im) simplify
-	(IM packages list) when configuring chinput, we need miniChinput (a
-	evolution of chinput that replaced it)
-
-	* share/rpmsrate: install slmodem for ltmodem, slamr, slusb windmodem
-	drivers too
-
-	* standalone/localedrake: really reset IM on language switch
-	remove debug message
-	only default to per locale default IM when switching between locales
-
-	* network/network.pm (read_all_conf) remove spurous character from regexp
-	(read_all_conf) ignore rpm's backups (#10816)
-
-	* resize_fat/c_rewritten.xs, xf86misc/main.xs, Newt/Newt.xs: kill warnings
-
-	* drakxtools.spec: 10.1-0.27mdk
-	10.1-0.26mdk
-	10.1-0.25mdk
-
-2004/09/09  Warly  <warly at mandrakesoft.com>
-
-	* share/compssUsers.pl: Display Development group in the same way as other
-	groups.
-
-2004/09/09  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Up kpilot
-	compssUsers.pl and rpmsrate for 10.1 Community
-
-	* share/compssUsers.pl: compssUsers.pl and rpmsrate for 10.1 Community
-
-2004/09/09  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* c/smp-dmi.c: add dmi type 6 in detection memory size
-
-2004/09/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/be.po: cyrillic fixes
-
-	* share/po/tg.po, share/po/ltg.po, share/po/ru.po, share/po/ro.po,
-	share/po/mt.po, share/po/sr@Latn.po, share/po/it.po, share/po/tl.po,
-	share/po/de.po, share/po/sr.po, share/po/cy.po, share/po/da.po,
-	share/po/ca.po, share/po/el.po, share/po/bg.po, share/po/lv.po: fixed
-	media paths
-
-	* share/po/uk.po: cyrillic fixes
-	fixed media paths
-
-2004/09/09  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: 
-	  - handle lilo "static-bios-codes" option
-	  - call lilo with a forced stdin (so that it doesn't read from tty)
-	  - enable calling lilo with a special stdin value
-	help emacs mode
-	fix regexp to work with "linux-2.6.8.1-10mdk"
-	instead of expanding symlinks in any case, only do it when renaming
-	"linux"
-	into the kernel version based label (eg: "2681-10")
-	that way "linux" like entries won't be modified, the way the "linux" is
-	already handled
-
-	* any.pm: handles the lilo case where it wants to assign a new Volume ID:
-	prompt the user, then
-	  - if it doesn't want to modify the Volume ID, use static-bios-codes to
-	be able to install lilo
-	  - otherwise call lilo with answer "n" to the question "Is the above
-	disk an NT boot disk?"
-	so that it assigns a new Volume ID
-
-	* run_program.pm: don't check_prog when the prog is a complex command
-	(containing a pipe)
-	simplify
-	rename $str into $real_name
-	remove redundant code
-
-2004/09/09  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps_interactive.pm: Fix regexp
-
-	* share/po/fr.po: Grammar fixes
-
-2004/09/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/network.pm (read_all_conf) remove spurous character from regexp
-	(read_all_conf) ignore rpm's backups (#10816)
-
-2004/09/08  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Slow mdkkdm, up kdm, add accessibility softwares
-
-2004/09/08  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* detect_devices.pm: added slamr, slusb and ltmodem modules for getModem
-
-2004/09/08  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/09/08  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot: update splash when removed too, use Mandrakelinux
-	theme by default,
-	don't give theme name to remove-theme
-
-	* network/network.pm (configureNetwork2) update iftab when config is
-	written
-
-	* standalone/drakconnect: fix #11287
-
-	* network/ethernet.pm: remove update_eth_card_iftab(), add update_iftab()
-
-2004/09/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/de.po (tm) -> ™
-	updated po file
-
-	* share/po/it.po: updated Italian file
-
-	* keyboard.pm: added (commented) new keyboard for tibetan script, so I
-	remember it later
-
-2004/09/08  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/get.pm: fix comment
-
-	* any.pm: replace "Cancel" with "Close" when prompting to launch userdrake
-	(as suggested by Fabian Mandelbaum)
-	disable "Ok" when neither NFS nor SMB is selected (as suggested by
-	Fabian Mandelbaum)
-
-2004/09/08  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/09/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* http.pm, install_any.pm: Better version of the reload-IO::Socket patch
-
-	* install_steps_interactive.pm: Don't suggest lost+found as a user name
-	(bug #11298)
-
-	* install_steps.pm: Don't require installation of foomatic-db-engine when
-	installing from the
-	mini CD (bug #11292)
-
-	* pkgs.pm: Add a count of skipped packages after having read an hdlist
-	Always return a hashref from pkgs::packageMedium()
-	Remove debug logs
-
-2004/09/08  Thomas Backlund  <tmb at mandrake.org>
-
-	* share/po/fi.po: updated translations...
-
-2004/09/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.24mdk
-
-	* standalone/drakupdate_fstab: handle options in any order
-
-	* harddrake/autoconf.pm (xconf) fix X11 autoconfiguration
-
-	* standalone/drakperm (get_user_or_group) fix freeze (#11274)
-
-	* standalone/service_harddrake: log which tools are runned
-	fix log message when we cannot run a configurator
-
-	* any.pm (set_window_manager) ensure ~/.dmrc is owned by user else GDM
-	complains about (spoted by frederic crozat)
-
-	* share/rpmsrate: install slmodem for winmodem managed by ALSA (there're
-	more out not
-	managed by ALSA that need to be added here)
-
-2004/09/07  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Add kphone
-
-2004/09/07  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/adsl.c (perform_adsl) ppp module doesn't exist, don't try to
-	load it
-
-2004/09/07  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* http.pm, install_any.pm: Install from a CD with a networked HTTP media :
-	force reloading of
-	IO::Socket::INET after having brought up the network interface. It
-	won't work otherwise (for mysterious reasons.)
-
-2004/09/07  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Add kphone
-	Down kdm
-
-2004/09/07  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - shift twice to get the correct function name
-
-2004/09/07  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/adsl.c (perform_adsl) ppp module doesn't exist, don't try to
-	load it
-
-	* mouse.pm: more synaptics fixes
-
-	* fs/mount_options.pm (set_default) use "users" options for removable
-	devices (so that users
-	can unmount them if the devices were mounted by root)
-
-2004/09/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Bokmål po file
-
-2004/09/07  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/bootloader-config: take care of symlink based bootloader
-	entries
-
-	* bootloader.pm: create get_kernels_and_labels_before_kernel_remove() used
-	by bootloader-config
-
-	* modules/modprobe_conf.pm, modules/modules_conf.pm: when installing on
-	kernel 2.4, do generate a valid modprobe.conf anyway
-
-2004/09/07  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: install_urpmi() wasn't writing proper urls when having
-	read an hdlists
-	file for a networked supplementary media
-	Allow supplementary media for upgrades
-
-	* pkgs.pm: install_urpmi() wasn't writing proper urls when having read an
-	hdlists
-	file for a networked supplementary media
-
-2004/09/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: one more change for 10.1-0.23mdk
-	last minute change for 10.1-0.23mdk
-	10.1-0.23mdk
-
-	* share/po/fr.po: typo fix
-	fix unclosed tag
-
-	* install_steps.pm (selectLanguage) set default IM (else IM was only set
-	if one click on
-	"Country / Region" in summary)
-
-2004/09/07  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Down zapping rank
-
-2004/09/07  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - shift twice to get the correct function name
-
-2004/09/07  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/tools.pm (get_interface_type) ethernet devices can be used as
-	adsl devices
-
-	* standalone/drakconnect (del_intf) use more detailled device names on
-	Fabrice Facorat suggestion
-	s/kind/name/
-	(manage) clean interface kind assignment
-
-	* network/adsl.pm: load modules for pppoe connections during install
-	(partial fix for #11189)
-
-	* mouse.pm: more synaptics fixes
-
-	* fs/mount_options.pm (set_default) use "users" options for removable
-	devices (so that users
-	can unmount them if the devices were mounted by root)
-
-	* network/netconnect.pm: I sux
-	pppoa shouldn't be selected by default for ethernet devices, fallback on
-	pppoe
-	use fctStartAdsl for eagle-usb in dhcp/static modes
-
-2004/09/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Bokmål po file
-
-2004/09/07  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/bootloader-config: take care of symlink based bootloader
-	entries
-
-	* bootloader.pm: create get_kernels_and_labels_before_kernel_remove() used
-	by bootloader-config
-
-	* fs.pm: 
-	  - ignore first line of /proc/swaps
-	  - partially handle /udev/xxx device names in fstab
-	  - ignore rootfs "device"
-	  - don't warn for loopback files
-
-	* modules/modprobe_conf.pm, modules/modules_conf.pm: when installing on
-	kernel 2.4, do generate a valid modprobe.conf anyway
-
-2004/09/07  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Iran != Irak
-	Typo fix
-
-	* pkgs.pm: Code factorization
-	Skip packages that are found on a supplementary media but that are
-	already provided by the main media.
-
-	* install_any.pm: Remove unused variable
-
-2004/09/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: one more change for 10.1-0.23mdk
-	last minute change for 10.1-0.23mdk
-	10.1-0.23mdk
-
-	* standalone/service_harddrake: add/update a few comments
-	explicitely do not try to run configurator for AGP, ATA_STORAGE,
-	SATA_STORAGE,
-	SCSI_CONTROLLER and TV classes (some of them [eg: TV] do have a
-	configurator
-	for harddrake GUI and thus are not skiped by -x test)
-
-	* share/po/fr.po: typo fix
-	fix unclosed tag
-	update
-
-2004/09/06  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-	Updated Simplified Chinese translation
-
-	* share/po/DrakX.pot: Updated Simplified Chinese translation
-
-2004/09/06  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_conf_backend) explode sagem specific stuff to
-	sagem_set_parameters()
-
-	* install2.pm: always load mouse modules at beginning of install (should
-	fix X test
-	not working with synaptics during install)
-
-	* standalone/drakconnect: perl_checker fixes
-	(del_intf) update for adsl/modem/isdn connections
-	(build_tree) avoid code duplication, use network::modem::ppp_read_conf
-	(build_notebook) Authentication is used for modems only (better fix for
-	#11142)
-
-	* network/modem.pm (ppp_read_conf) override Authentication if it does not
-	contain a digit character,
-	the empty string exists ...
-	(ppp_read_conf) try to read kppp config from user dir
-	(ppp_read_conf) return modem configuration
-	(ppp_read_conf) use /dev/modem if no modem was detected (do not crash
-	when we edit a connection whose modem is unplugged)
-
-	* detect_devices.pm (getNet) fix detection in 2.4 kernel for net devices
-	with high traffic
-
-	* network/netconnect.pm: fix stupid error
-	adjust tests, dhcp/static adsl connections can now use non-ethernet
-	devices
-	write sagem specific stuff for dhcp/static connections
-	always ask adsl provider
-	keep linmodem message for Hcf and Hsf
-	remove wrong message about linmodems (#11224)
-
-	* share/po/fr.po: translate Zeroconf message
-
-2004/09/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/wa.po, share/po/fr.po: Mandrake --> Mandrakelinux
-	updated pot file
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/lv.po,
-	share/po/hu.po, share/po/fa.po, share/po/id.po, share/po/ru.po,
-	share/po/br.po, share/po/sl.po, share/po/nn.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/mn.po, share/po/uk.po,
-	share/po/am.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/fur.po, share/po/mk.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/cs.po, share/po/uz@Latn.po: updated pot file
-
-	* lang.pm: some more languages not supported on console
-
-	* any.pm: Changed "User name" to "Login name" (less ambiguous)
-
-2004/09/06  Pixel  <pixel at mandrakesoft.com>
-
-	* raid.pm: safer
-	fix typo
-	handle pt_type, not only fs_type
-	be more failsafe with half broken existing raids
-
-	* drakxtools.spec: need latest perl-MDK-Common
-
-	* detect_devices.pm: BIOS release date can have date DD/MM/YY (or maybe it
-	is MM/DD/YY), only YYYY was handled
-
-	* fs/type.pm: 
-	  - detect LVM2
-	  - don't even check_md magic when we don't have the size of the device
-	detect linux software raid magic
-
-	* share/rpmsrate: install xorg-x11-server when installing xorg-x11 (no
-	need to do it based on the hardware anymore (it used to be needed for
-	XF3))
-
-	* install_steps_interactive.pm: 
-	  - don't prompt package groups selection when the available size is
-	200MB (instead of 140MB)
-	  - when user unselect every groups (ie. the special minimal install
-	case), allow the available size to be lower than needed size
-
-	* fsedit.pm: some more logging
-	fix typo
-	detect linux software raid magic
-
-	* diskdrake/interactive.pm: fix displaying "mdmd0" instead of "md0"
-
-2004/09/06  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/09/06  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Supplementary media: don't forget to check for a new
-	rpmsrate too
-	Make the network supplementary media probe able to find an hdlists file
-	Override rpmsrate and compssUsers.pl by the ones found on a
-	supplementary CD
-
-	* pkgs.pm: Make the network supplementary media probe able to find an
-	hdlists file
-
-	* share/list: consolechars has moved
-
-2004/09/06  Thomas Backlund  <tmb at mandrake.org>
-
-	* share/po/fi.po: Merge translations by Taisto Kuikka.
-	 Update translations, not yet fully translated...
-
-2004/09/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: better looking for alternative drivers
-
-	* ugtk2.pm (_create_window) do not set border for wizards
-
-	* drakxtools.spec: 10.1-0.22mdk
-	10.1-0.21mdk
-
-	* install_steps.pm, standalone/localedrake, install_steps_interactive.pm:
-	drop lang::write()'s prefix parameter in favor of $::prefix (which was
-	already partially done)
-
-	* share/rpmsrate: do not install uim-applet for japanese since SCIM
-	already provides its
-	own applet
-
-	* harddrake/data.pm: 
-	  - do not run drakconnect for ethernet & ADSL
-	  - do not run diskdrake for hd
-	add module for storage controllers that are not compiled built-in in
-	kernel
-	add a few comments
-	add module for AGP controller
-	run drakconnect when an ADSL device is found (we should do so only when
-	device
-	is added, not when removed)
-	add module for TV cards (trainee sucks...)
-
-	* standalone/drakconnect: fix crashes
-
-	* log.pm (explanations) redirect log where appropriate at install time
-
-	* standalone/service_harddrake: typo fix
-	add module for storage controllers that are not compiled built-in in
-	kernel
-
-	* modules.pm: add module for storage controllers that are not compiled
-	built-in in kernel
-
-	* standalone/drakboot: ensure we do not enable autologin w/o any user
-
-	* lang.pm (write) fix log message when installing IM packages
-	drop lang::write()'s prefix parameter in favor of $::prefix (which was
-	already partially done)
-	(write, configure_kdeglobals) log quite more explanations
-	(write) really do nothing when no IM is set (harmfull but saner)
-	(write) package list was already computed
-	fix english name for breton
-	always set QT_IM_MODULE when setting GTK_IM_MODULE
-	remove uneeded quotes
-	  - install scim-m17n as well for generic SCIM configuration (more input
-	methods)
-	  - split am entry from generic one since we've choosen to use
-	  scim-tables for am on 2004-09-01
-	add specific packages to install for japanese when using SCIM
-	set QT_IM_MODULE too (UTUMI Hirosi)
-	we should probably set it for all IM that use gtk+ API since their API
-	is almost identical.
-
-	* share/po/fr.po: update
-
-2004/09/06  vljubovic
-
-	* share/po/bs.po: Small fixes
-
-2004/09/05  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po, share/po/DrakX.pot: Updated Simplified Chinese
-	translation
-
-2004/09/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/mn.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/hi.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/nl.po, share/po/tl.po, share/po/de.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* pixmaps/langs/lang-lb.png, pixmaps/langs/lang-km.png,
-	pixmaps/langs/lang-lo.png, pixmaps/langs/lang-ik.png,
-	pixmaps/langs/lang-ur.png, pixmaps/langs/lang-sc.png,
-	pixmaps/langs/lang-fy.png, pixmaps/langs/lang-ks.png,
-	pixmaps/langs/lang-lg.png, pixmaps/langs/lang-ug.png,
-	pixmaps/langs/lang-sw.png, pixmaps/langs/lang-ha.png,
-	pixmaps/langs/lang-tt@Cyrl.png, pixmaps/langs/lang-pa.png,
-	pixmaps/langs/lang-chr.png, pixmaps/langs/lang-csb.png,
-	pixmaps/langs/lang-fur.png, pixmaps/langs/lang-so.png,
-	pixmaps/langs/lang-ps.png, pixmaps/langs/lang-kl.png,
-	pixmaps/langs/lang-ks@Arab.png, pixmaps/langs/lang-kk.png: new lang
-	images
-
-	* lang.pm: * enabled some more languages in the selection list (Furlan,
-	Frisian,
-	Inuktitut, Greenlandic (Kalaallisut), Khmer, Luxembourguish, Punjabi,
-	  Sardinian and Uyghur).
-	  Those languages have either translations for Mandrakelinux tools,
-	  or for KDE, or Gnome, or any combination of the three;
-	  or there have been interest recently in starting a translation for
-	them.
-	* updated list of available locales (@locales)
-
-	* standalone/drakbackup: fixed typo
-
-2004/09/05  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/09/05  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/po/fr.po: Replace a XFree86 by X11 in the French messages
-
-2004/09/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po: fixed typo
-
-	* share/po/ja.po: updated Japanese file
-
-2004/09/03  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2004/09/03  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: more
-
-2004/09/03  Olivier Blin <oblin at mandrakesoft.com>
-
-	* Xconfig/xfree.pm (set_synaptics) remove spurious space
-
-	* mouse.pm: perl_checker fix
-	(set_xfree_conf) synaptics fixes
-
-2004/09/03  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Umount supplementary CD immediately after having read
-	informations on it.
-
-2004/09/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ja.po: update (Yukiko Bando <ybando@k6.dion.ne.jp>)
-
-	* detect_devices.pm (getModem) handle new winmodem low level driver for
-	VIA in ALSA
-
-2004/09/03  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm (findIntf, read_all_conf) use default DEVICE field
-	only at last
-	ressort, keep weird DEVICE fiels (i.e for sagem)
-	(write_interface_conf) remove quotes if DEVICE is the result of a
-	command
-	(configureNetwork2) use key from $intf hash to determine ifcfg
-	filename (to allow to use weird DEVICE fields, like
-	DEVICE=`/usr/sbin/eaglectrl -i`)
-	(write_interface_conf) allow TYPE field, will be used to recognize ADSL
-	interfaces
-
-	* mouse.pm (set_xfree_conf) synaptics fixes
-
-	* network/netconnect.pm: support DHCP and manual for sagem devices
-
-	* network/tools.pm: remove horrible and unneeded workaround
-	shut up perl_checker!
-	remove test_internet_connection(), use network::test instead
-	(get_interface_type) enhance detection for adsl devices
-
-2004/09/03  Pixel  <pixel at mandrakesoft.com>
-
-	* share/list, interactive/newt.pm: 
-	  - we need unicode_start, which need kbd_mode and a real "echo" command
-	  - initialize newt (and so slang) with a fake en_US.UTF-8 locale during
-	install
-	(and it works better when slang does its setlocale, i don't know why)
-
-	* Makefile: make dont_run_directly_stage2 keep runinstall2 as a symlink
-	(since mdkstage1 check it is a symlink)
-	  - we need unicode_start, which need kbd_mode and a real "echo" command
-	  - initialize newt (and so slang) with a fake en_US.UTF-8 locale during
-	install
-	(and it works better when slang does its setlocale, i don't know why)
-
-	* lang.pm: always use utf8 strings during install since our locale is
-	always utf8
-
-	* Newt/Newt.xs: 
-	  - we need unicode_start, which need kbd_mode and a real "echo" command
-	  - initialize newt (and so slang) with a fake en_US.UTF-8 locale during
-	install
-	(and it works better when slang does its setlocale, i don't know why)
-	don't let slang call setlocale(), we do it ourselves
-
-2004/09/03  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Umount supplementary CD immediately after having read
-	informations on it.
-	Make local copies of rpmsrate and compssUsers.pl from supplementary CD
-	Better handling of mounting/umounting supplementary CDs
-	Add a system error when no CD reader is found for a supplementary CD
-	Remove support for looking directly for a hdlist1s.cz file on
-	supplementary CDs.
-
-	* pkgs.pm: Better handling of mounting/umounting supplementary CDs
-
-2004/09/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: log a few more commits from blino for 10.1-0.20mdk
-	10.1-0.20mdk
-
-	* share/po/ja.po: update (Yukiko Bando <ybando@k6.dion.ne.jp>)
-
-	* tools/cvslog2changelog.pl: add one more translator
-
-	* detect_devices.pm (getModem) handle new winmodem low level driver for
-	VIA in ALSA
-
-2004/09/03  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: don't exclude Gtk2::Entry filling
-
-2004/09/03  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/09/03  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm (findIntf, read_all_conf) use default DEVICE field
-	only at last
-	ressort, keep weird DEVICE fiels (i.e for sagem)
-	(write_interface_conf) remove quotes if DEVICE is the result of a
-	command
-	(configureNetwork2) use key from $intf hash to determine ifcfg
-	filename (to allow to use weird DEVICE fields, like
-	DEVICE=`/usr/sbin/eaglectrl -i`)
-	(write_interface_conf) allow TYPE field, will be used to recognize ADSL
-	interfaces
-
-	* network/netconnect.pm: support DHCP and manual for sagem devices
-
-	* network/adsl.pm: adapt to new fctStartAdsl
-
-	* network/tools.pm: remove horrible and unneeded workaround
-	shut up perl_checker!
-	remove test_internet_connection(), use network::test instead
-	(get_interface_type) enhance detection for adsl devices
-
-2004/09/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po: small fix in Japanese po files
-
-	* share/po/bs.po, share/po/et.po, share/po/pt.po, share/po/pl.po,
-	share/po/fr.po: updated Estonian file
-
-2004/09/03  Pixel  <pixel at mandrakesoft.com>
-
-	* share/list: 
-	  - we need unicode_start, which need kbd_mode and a real "echo" command
-	  - initialize newt (and so slang) with a fake en_US.UTF-8 locale during
-	install
-	(and it works better when slang does its setlocale, i don't know why)
-	stage1 terminfo is not available anymore, use our own terminfo
-
-	* interactive/newt.pm: 
-	  - we need unicode_start, which need kbd_mode and a real "echo" command
-	  - initialize newt (and so slang) with a fake en_US.UTF-8 locale during
-	install
-	(and it works better when slang does its setlocale, i don't know why)
-
-	* Makefile: make dont_run_directly_stage2 keep runinstall2 as a symlink
-	(since mdkstage1 check it is a symlink)
-	  - we need unicode_start, which need kbd_mode and a real "echo" command
-	  - initialize newt (and so slang) with a fake en_US.UTF-8 locale during
-	install
-	(and it works better when slang does its setlocale, i don't know why)
-
-	* lang.pm: always use utf8 strings during install since our locale is
-	always utf8
-
-	* Newt/Newt.xs: 
-	  - we need unicode_start, which need kbd_mode and a real "echo" command
-	  - initialize newt (and so slang) with a fake en_US.UTF-8 locale during
-	install
-	(and it works better when slang does its setlocale, i don't know why)
-	don't let slang call setlocale(), we do it ourselves
-
-	* install2.pm: stage1 terminfo is not available anymore, use our own
-	terminfo
-
-2004/09/03  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm: Better handling of mounting/umounting supplementary CDs
-
-	* install_any.pm: Make local copies of rpmsrate and compssUsers.pl from
-	supplementary CD
-	Better handling of mounting/umounting supplementary CDs
-	Add a system error when no CD reader is found for a supplementary CD
-	Remove support for looking directly for a hdlist1s.cz file on
-	supplementary CDs.
-	Don't bypass errorOpeningFile, because it won't ask for further CDs
-	anymore... (/me sux)
-
-	* share/po/fr.po: Fix grammar.
-
-2004/09/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: log a few more commits from blino for 10.1-0.20mdk
-	10.1-0.20mdk
-
-	* share/po/fr.po: update
-
-	* ugtk2.pm (create_hbox) do not set extra border since we've a generic fix
-	in _create_window
-	(_create_window) prevent inner widgets to stick the window
-
-	* tools/cvslog2changelog.pl: add one more translator
-
-	* install_steps.pm, install_steps_interactive.pm (setupSCSI) load
-	modularized PATA drivers too
-
-2004/09/03  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: now kernel-i686-up-4GB and kernel-p3-smp-64GB are
-	deprecated
-
-2004/09/03  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: don't exclude Gtk2::Entry filling
-
-2004/09/03  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/09/03  Pixel  <pixel at mandrakesoft.com>
-
-	* share/list, install2.pm: stage1 terminfo is not available anymore, use
-	our own terminfo
-
-2004/09/03  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Don't bypass errorOpeningFile, because it won't ask for
-	further CDs
-	anymore... (/me sux)
-
-	* share/po/fr.po: Fix grammar.
-
-2004/09/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-	* ugtk2.pm (create_hbox) do not set extra border since we've a generic fix
-	in _create_window
-	(_create_window) prevent inner widgets to stick the window
-
-2004/09/03  vljubovic
-
-	* share/po/bs.po: Improving Bosnian translation
-
-2004/09/03  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: now kernel-i686-up-4GB and kernel-p3-smp-64GB are
-	deprecated
-
-2004/09/02  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated partially
-
-2004/09/02  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated zh_CN translation
-
-2004/09/02  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 626
-	DrakX will first
-
-2004/09/02  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: fix cancel in disk install
-
-	* standalone/drakupdate_fstab: do not use supermount by default for
-	removable devices
-
-	* share/rpmsrate: add synaptics in INSTALL section
-
-	* network/test.pm: initial import of connection test package
-
-	* fs/mount_options.pm: set_default: use sync for removable devices
-
-	* crypto.pm, install_any.pm: adapt to new mirror structure
-
-2004/09/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po: updated po file
-	updated pot file
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* standalone/drakhelp: Mandrake -> Mandrakelinux
-
-2004/09/02  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: replace /etc/udev/conf.d/xxx.conf shell scripts with
-	/etc/udev/rules.d/xxx.conf conf file
-
-2004/09/02  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: If a supplementary media is incorrect, continue asking
-	Don't log too much
-	Don't start network for supplementary media if it is cdrom or disk
-
-	* install_steps.pm: Don't unselect all media in autoinstalls.
-
-	* pkgs.pm: If a supplementary media is incorrect, continue asking
-	Allow to deselect media only if the hdlists file contains a line
-	"askmedia"
-
-2004/09/02  sharuzzaman
-
-	* share/po/ms.po: Updated Malay translation
-
-2004/09/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.19mdk
-
-	* standalone/printerdrake, standalone/scannerdrake: reuse icon for windows
-
-	* standalone/localedrake: use proper window & banner icon
-	set banner title...
-
-	* standalone/drakhelp: reuse icon for windows
-	fix untraslated title
-
-	* standalone/drakfirewall, standalone/logdrake, standalone/draksec,
-	standalone/drakfloppy, standalone/drakedm, standalone/drakxservices,
-	standalone/drakproxy, standalone/drakperm, standalone/keyboarddrake,
-	standalone/net_monitor, standalone/diskdrake, standalone/mousedrake,
-	standalone/drakclock, standalone/drakxtv: reuse mcc icons (if
-	availlable) for windows
-
-	* printer/main.pm (write_client_conf) fix drakxtools build
-
-	* any.pm (selectLanguage) tag title as translatable
-
-	* ugtk2.pm (new) fallback on window'icon for wizards
-
-2004/09/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po, share/po/es.po, share/po/fr.po, share/po/wa.po: updated
-	Norwegian file; small fixes on Spanish, French and Walloon files
-
-2004/09/01  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: comply with the rpmsrate parser
-
-2004/09/01  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Do not check for presence of "scanner-gui" during install.
-
-	* services.pm: 
-	  - Lete the function "start_not_running_service()" really start the
-	specified service if it is not running instead of being a copy of the
-	function "is_service_running()".
-	  - Restored wrong upload.
-
-2004/09/01  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: fixed/added some laptop entries
-
-2004/09/01  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: Updated POT file
-
-2004/09/01  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo melo
-	last rush
-
-2004/09/01  Olivier Blin <oblin at mandrakesoft.com>
-
-	* share/rpmsrate: add xawtv in TV section, install ati.2 for ATI cards
-	only
-
-2004/09/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: fixed fonts.cache-1 file so that the tamil font no
-	longer claims it
-	support western languages.
-
-2004/09/01  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: comply with the rpmsrate parser
-
-2004/09/01  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: perl_checker cleanup
-
-2004/09/01  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Do not check for presence of "scanner-gui" during install.
-	  - Fixed bug of printerdrake trying to install the virtual package
-	"scanner-gui" during installation (when a multi-function device from HP
-	is present).
-
-	* printer/main.pm: 
-	  - If cupsd.conf is read but does not exist, use default settings for
-	all settings which are required. This prevents from writing a corrupt
-	cupsd.conf
-	  - Write cupsd.conf only if it exists already (cups package installed).
-	  - Create /etc/cups directory if it does not exist when client.conf is
-	written
-	  - Return something reasonable if client.conf is tried to be read but
-	does not exist.
-	  - Write mime.convs only if it exists already (cups package installed).
-
-	* services.pm: 
-	  - Lete the function "start_not_running_service()" really start the
-	specified service if it is not running instead of being a copy of the
-	function "is_service_running()".
-	  - Restored wrong upload.
-	  - Lete the function "start_not_running_service()" really start the
-	specified service if it is not running instead of being a copy of the
-	function "is_service_running()".
-
-2004/09/01  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: fixed/added some laptop entries
-
-2004/09/01  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: Updated POT file
-
-2004/09/01  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/09/01  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_applet: add notconfigured state
-
-	* share/rpmsrate: add xawtv in TV section, install ati.2 for ATI cards
-	only
-
-	* standalone/drakboot: do not crash if default autologin or default
-	desktop doesn't exist
-
-	* standalone/service_harddrake: write modules conf files if a tv card is
-	detected
-
-	* mdk-stage1/init.c: drop non-standard tld (localdomain)
-
-	* standalone/net_monitor: fix stupid error
-
-	* network/network.pm: symlink resolv.conf in install root, so that it
-	works for dhcp too
-	write /etc/resolv.conf in install root
-
-	* network/tools.pm: revert titi fix, do not return random interface if
-	internet connection
-	is not configured
-	do not use find over grep, just find
-
-2004/09/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: fixed fonts.cache-1 file so that the tamil font no
-	longer claims it
-	support western languages.
-	modified the fonts.conf file so that a subset of the "sans" alias list
-	is copied into the "serif" and "monospace" aliases list, before the
-	listing
-	of problematic fonts, hoping it will solve bug #10937
-	(apparently the problem is that input fields want a monospace font,
-	there is no latin monospace font, and a rando font is used, the tamil
-	one having wrong glyphs at some latin1 positions)
-
-2004/09/01  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* lang.pm: Fix syntax error
-
-	* any.pm: Fix generation of urpmi.cfg when doing a disk install from a
-	live tree
-
-	* share/rpmsrate: remove duplicated entry for nut-server
-
-	* install_any.pm: perl_checker cleanup
-	ensure install_interactive is loaded
-	When adding a networked supplementary media, configure the network if
-	needed. Install basesystem for this purpose.
-
-	* Makefile: Split into a new target mdkinst_stage2
-
-2004/09/01  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Fixed bug of printerdrake trying to install the virtual package
-	"scanner-gui" during installation (when a multi-function device from HP
-	is present).
-
-2004/09/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/net_applet: perl_checker cleanups
-
-	* standalone/harddrake2: enable harddrake2 to properly adapt to theme
-	changes and the like
-
-	* share/rpmsrate: enable SCIM for Amharic language
-
-	* standalone/drakclock: unbreak drakclock
-
-	* network/tools.pm (get_internet_connection) if no default route exits,
-	take first route in order
-	to not have strange messages in net_appletb
-
-	* drakxtools.spec: 10.1-0.18mdk
-
-	* lang.pm: enable SCIM for Amharic language
-	typo fix
-	simplify
-
-	* detect_devices.pm (getBewan) reuse ematching_desc__regexp()
-
-	* standalone/drakautoinst (create_notebook) follow the same parameter
-	order as gtkappend_page() use and
-	as C/Gtk+ does
-
-	* ugtk2.pm (create_notebook) follow the same parameter order as
-	gtkappend_page() use and
-	as C/Gtk+ does
-	(create_notebook) give meaningfull name to variables
-
-2004/09/01  Warly  <warly at mandrakesoft.com>
-
-	* standalone/drakclock: initialize  and  so that motion_event correctly
-	handle the mouse moves
-	Repaint the calendar (especially when the day changed)
-	Make the hour tick shorter
-	Check if the ntpdate command succeed or not, do not quit if it fails
-	Only apply the date command again if ntp mode is not selected
-	Do not perform a date command when ntpdate has just been called
-
-2004/08/31  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated a part of
-
-2004/08/31  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: ads #25: use translation from Marketing and not one
-	which come from nowhere
-	Close <b> in ads #28
-
-2004/08/31  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* harddrake/data.pm: added initial support for UPS
-
-	* detect_devices.pm: please perl_checker
-	simplify UPS detection and report the needed info for harddrake
-
-	* share/rpmsrate: added kuickshow and supertux
-
-2004/08/31  Florin Grad  <florin at mandrakesoft.com>
-
-	* network/shorewall.pm: use the loc zone in policy only if the loc
-	interface exists
-
-2004/08/31  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: Updated POT file
-
-2004/08/31  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* share/advertising/README, share/advertising/corpo-server-03.png,
-	share/advertising/corpo-desk-10.pl,
-	share/advertising/corpo-server-09.png, share/advertising/list-cpd,
-	share/advertising/corpo-server-06.pl,
-	share/advertising/corpo-server-01.pl,
-	share/advertising/corpo-desk-01.png,
-	share/advertising/corpo-desk-05-a.pl,
-	share/advertising/corpo-desk-09.png,
-	share/advertising/corpo-desk-05-a.png,
-	share/advertising/corpo-desk-06-a.pl,
-	share/advertising/corpo-desk-06.png, share/advertising/corpo-desk-02.pl,
-	share/advertising/corpo-desk-06-b.pl,
-	share/advertising/corpo-server-08.pl,
-	share/advertising/corpo-desk-05-b.png,
-	share/advertising/corpo-server-02.pl,
-	share/advertising/corpo-server-10.png,
-	share/advertising/corpo-server-10.pl,
-	share/advertising/corpo-server-05.pl,
-	share/advertising/corpo-server-08.png, share/advertising/list-cps,
-	share/advertising/corpo-desk-03.png,
-	share/advertising/corpo-server-06.png,
-	share/advertising/corpo-desk-07.pl,
-	share/advertising/corpo-server-07.pl,
-	share/advertising/corpo-desk-04.pl, share/advertising/corpo-desk-09.pl,
-	share/advertising/corpo-server-05.png,
-	share/advertising/corpo-server-02.png,
-	share/advertising/corpo-desk-05.png,
-	share/advertising/corpo-desk-02.png, share/advertising/corpo-desk-05.pl,
-	share/advertising/corpo-desk-06.pl, share/advertising/corpo-desk-08.png,
-	share/advertising/corpo-server-04.pl,
-	share/advertising/corpo-desk-07.png,
-	share/advertising/corpo-server-09.pl,
-	share/advertising/corpo-server-07.png,
-	share/advertising/corpo-desk-04.png,
-	share/advertising/corpo-server-01.png,
-	share/advertising/corpo-desk-03.pl,
-	share/advertising/corpo-desk-06-b.png,
-	share/advertising/corpo-desk-05-b.pl,
-	share/advertising/corpo-desk-10.png,
-	share/advertising/corpo-server-04.png,
-	share/advertising/corpo-desk-01.pl,
-	share/advertising/corpo-desk-06-a.png,
-	share/advertising/corpo-desk-08.pl,
-	share/advertising/corpo-server-03.pl: Corporate material
-
-2004/08/31  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: dia zero
-	melo
-
-2004/08/31  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_applet (is_running) enhance regexp, use any
-
-2004/08/31  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: make CONSOLE_NOT_LOCALIZED written to i18n file
-
-	* share/po/nl.po, share/po/id.po, share/po/lt.po, share/po/cy.po,
-	share/po/et.po, share/po/da.po, share/po/mt.po, share/po/uz@Latn.po:
-	updated Welsh and Estonian files; fixed some errors due to automatic
-	replacements.
-
-2004/08/31  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_steps.pm, install_any.pm, install_steps_interactive.pm: Support
-	for unselecting some media before the install (begin.)
-
-	* pkgs.pm: Remove dead code
-	Support for unselecting some media before the install (begin.)
-
-	* share/rpmsrate: Remove duplicate entries in rpmsrate
-
-	* share/po/fr.po: French grammar fix
-
-2004/08/31  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/data.pm: 
-	  - Let xpp also be installed when in daemon-less CUPS client mode.
-
-2004/08/31  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect (build_notebook) fix crashes (#11100)
-
-	* share/rpmsrate: install nut-server for MGE's UPS
-
-	* standalone/net_applet (is_running) make it work
-	(is_running) try harder
-	(is_running) ignore our own process ... (brown paper bag bug)
-
-2004/08/30  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: part updated
-
-2004/08/30  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/25.png: New image
-
-2004/08/30  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/net_applet: 
-	  - no need to run net-monitor with '--testing'
-	  - launch net_monitor in background
-	  - typo
-	  - avoid duplication
-	  - s/and/or/ (oblin)
-	  - launch net_monitor once (test if there's a running net_monitor
-	before)
-
-2004/08/30  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: added smartmontools
-
-2004/08/30  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/08/30  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/tools.pm, standalone/net_monitor: move start_interface and
-	stop_interface from net_monitor to network::tools, use it in net_monitor
-	and net_applet
-
-	* network/netconnect.pm: adsl_conf_backend needs $intf now
-	NET_DEVICE is the ethernet interface for pptp too
-
-	* standalone/net_applet: move start_interface and stop_interface from
-	net_monitor to network::tools, use it in net_monitor and net_applet
-	allow to connect/disconnect from net_applet
-	is_running returns a boolean which would never be > 1
-
-	* network/adsl.pm: write ifcfg files for NET_DEVICE if it's ethernet
-	(pptp, pppoe)
-
-2004/08/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-	updated pot file
-
-	* standalone/printerdrake: fixed use of N()
-
-	* share/po/it.po: updated Italian file
-	updated pot file
-	updated pot file
-
-2004/08/30  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: Fix support for suppl. CDs with hdlists file
-
-2004/08/30  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Fixed duplicate translatable strings.
-	  - Added column to show whether the printers are enabled or disables to
-	the list of available print queues in the main window.
-	  - Added command to the edit-printer window to enable and disable print
-	queues.
-	  - Fixed bug of "--expert" command line option of printerdrake not
-	working.
-
-	* printer/cups.pm, printer/main.pm, standalone/printerdrake: 
-	  - Added column to show whether the printers are enabled or disables to
-	the list of available print queues in the main window.
-	  - Added command to the edit-printer window to enable and disable print
-	queues.
-	  - Fixed bug of "--expert" command line option of printerdrake not
-	working.
-
-2004/08/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.17mdk
-
-	* share/po/br.po: update
-	typo fixes (Arpad Biro <biro_arpad@yahoo.com>)
-
-	* standalone/drakclock: fix layout so that NTP frame is not badly cut on
-	small resolution (#10971)
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, standalone/drakvpn, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	standalone/drakconnect, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/sl.po, share/po/nn.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/mn.po, share/po/uk.po,
-	share/po/am.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/fur.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: typo fixes (Arpad
-	Biro <biro_arpad@yahoo.com>)
-
-	* share/po/fr.po: minor update
-	update
-	typo fixes (Arpad Biro <biro_arpad@yahoo.com>)
-
-2004/08/30  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakupdate_fstab: do not restrict "many partitions" test to
-	SCSI devices
-	do not mount and add/delete in fstab when many partitions (#11005)
-
-	* mouse.pm: really make synaptics works at install (don't crash graphical
-	install)
-
-2004/08/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (Gtk2::ComboBox::set_text) explain which caller failled
-
-	* drakxtools.spec: 10.1-0.16mdk
-
-	* Xconfig/resolution_and_depth.pm (choose_gtk) fix crash
-
-	* share/po/fr.po: update
-
-2004/08/29  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/lv.po,
-	share/po/hu.po, share/po/fa.po, share/po/id.po, share/po/ru.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: Updated POT file
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-	Updated POT file
-
-2004/08/29  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 618
-	authentication
-	DrakX-zh_TW: 612
-		Espanol
-
-2004/08/29  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, standalone/printerdrake, printer/printerdrake.pm: 
-	  - Inform the user on first-time setup, both during or after
-	installation, that he can set up a daemon-less CUPS client.
-	  - Warn the user when printerdrake is set to daemon-less CUPS client
-	but no server is specified.
-	  - Fixed bug of local queues not being recognized when the spooler
-	daemon is not running during printerdrake startup.
-	  - Do not try to copy print queues when switchung from daemon-less CUPS
-	to normal CUPS.
-	  - Remove the client.conf when switching from daemon-less CUPS to
-	normal CUPS.
-
-2004/08/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakroam: move DHCP column to left for better sizing (Austin
-	<aacton@yorku.ca>)
-	(UpdateAvailable) print ESSID too (Austin <aacton@yorku.ca>)
-	fix Add button behavior (Austin <aacton@yorku.ca>)
-
-2004/08/29  vljubovic
-
-	* share/po/bs.po: Improving Bosnian translation
-
-2004/08/27  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 604
-	done
-
-2004/08/27  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm, network/tools.pm, network/network.pm,
-	network/adsl.pm: write metric in ifcfg files according to connection
-	type
-
-	* standalone/drakconnect (manage) read settings from correct interface for
-	non ethernet interfaces
-	(manage) add metric text entry for all connections
-
-	* network/modem.pm: use same keys than manage interface for metrics
-	(ppp_read_conf) read metric if set
-	write metric in ifcfg files according to connection type
-
-2004/08/27  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/rpmsrate: Remove duplicated entries with complex flags from the
-	rpmsrate
-
-2004/08/27  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/default.pm, printer/cups.pm, printer/main.pm, printer/data.pm,
-	standalone/printerdrake, printer/printerdrake.pm: 
-	  - Made support for daemon-less CUPS client working.
-	  - Fixed graying out of buttons/menu entries in the main window.
-
-2004/08/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/localedrake: do not complain on wizcancel
-
-	* standalone/logdrake (insert_text_n_scroll) fix displaying only last
-	parsed file
-
-	* detect_devices.pm (matching_driver) introduce it in order to factorize
-	some tests
-	add __regexp suffix to matching_desc() and  matching_driver()
-	(getModem) report modems supported by ALSA too
-
-	* lang.pm: space cleanup for lord perl_checker
-	(IM2packages)
-	  - alter prototype: directly take a locale hash
-	  - get lang from locale hash
-	  - use it to install needed packages depending on locale (instead of
-	only generic ones depending on IM)
-
-	* drakxtools.spec: 10.1-0.15mdk
-
-	* Xconfig/card.pm, pkgs.pm, common.pm, install_steps.pm, bootloader.pm,
-	install_any.pm: add __regexp suffix to matching_desc() and
-	matching_driver()
-
-	* share/rpmsrate: sort a few entries
-
-2004/08/27  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: melo
-
-2004/08/27  Laurent Montel  <lmontel at mandrakesoft.com>
-
-	* share/rpmsrate: Don't install kdeutils-klaptop all the time
-	just when we detect a laptop
-
-2004/08/27  Olivier Blin <oblin at mandrakesoft.com>
-
-	* install2.pm: read modules configuration file from stage1 as modules_conf
-	file, but
-	get an object of the proper type by using modules::any_conf::vnew
-
-2004/08/27  Olivier Thauvin  <thauvin at aerov.jussieu.fr>
-
-	* Xconfig/xfree.pm: 
-	  - add dell D800 specific modeline and resolution
-
-2004/08/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po, share/po/cs.po: updated Czech and Bokmål po files
-
-2004/08/27  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Support for multiple supplementary media
-
-	* share/rpmsrate: Remove duplicated entries with complex flags from the
-	rpmsrate
-
-2004/08/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakboot (lilo_choice) fix canceling first step
-
-	* detect_devices.pm (matching_driver) introduce it in order to factorize
-	some tests
-	add __regexp suffix to matching_desc() and  matching_driver()
-	(getModem) report modems supported by ALSA too
-
-	* standalone/localedrake: do not complain on wizcancel
-	no need to check first step return value since we're covered by both
-	Wizard_no_previous and die('wizcancel')
-	remove useless label "the_end"
-	inline select_language()
-	make it looks and behave like a wizard for GUI sanity (previously
-	cancel on second step resulted in step backward rather than exit...)
-
-	* share/rpmsrate: sort a few entries
-
-	* standalone/logdrake (insert_text_n_scroll) fix displaying only last
-	parsed file
-
-	* lang.pm: space cleanup for lord perl_checker
-	(IM2packages)
-	  - alter prototype: directly take a locale hash
-	  - get lang from locale hash
-	  - use it to install needed packages depending on locale (instead of
-	only generic ones depending on IM)
-
-	* Xconfig/card.pm, pkgs.pm, common.pm, install_steps.pm, bootloader.pm,
-	install_any.pm: add __regexp suffix to matching_desc() and
-	matching_driver()
-
-	* drakxtools.spec: 10.1-0.15mdk
-
-2004/08/26  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated 95%
-	Updated partially
-
-2004/08/26  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Finish to add french translation from Marketing team
-	(DrakX ads)
-
-2004/08/26  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* tools/ddcprobe/vbe.c, tools/ddcprobe/Makefile: Some arrangements for
-	IA-64
-	PowerPC arrangements from Christiaan Welvaart
-
-	* tools/ddcprobe/of.c: PowerPC arrangements from Christiaan Welvaart
-
-	* tools/ddcprobe/ddcxinfos.c: Some arrangements for IA-64
-
-2004/08/26  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: josé melo
-
-2004/08/26  Olivier Blin <oblin at mandrakesoft.com>
-
-	* install_steps_gtk.pm: define and use $o->{mouse}{alternate_install} if
-	detected mouse can't be used during install
-
-	* network/netconnect.pm: adsl devices need network restart if they're
-	*not* in the adsl devices list
-
-	* install_steps.pm (doPartitionDisksBefore) umount /sys and /proc/bus/usb
-	in chroot
-
-	* Xconfig/xfree.pm (set_synaptics) quote decimal values so that
-	write_XF86Config doesn't
-	write commas instead of dots
-
-	* mouse.pm: i sux
-	define and use $o->{mouse}{alternate_install} if detected mouse can't be
-	used during install
-	(set_xfree_conf) don't create crappy auxmouse if there is none
-	(detect) do not return unusable synaptics driver at beginning of install
-
-2004/08/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tg.po, share/po/fa.po, share/po/nb.po, share/po/bn.po,
-	share/po/uz.po, share/po/ru.po, share/po/wa.po, share/po/pt_BR.po,
-	share/po/sl.po, share/po/hi.po, share/po/af.po, share/po/et.po,
-	share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/nl.po,
-	share/po/it.po, share/po/uk.po, share/po/eu.po, share/po/es.po,
-	share/po/tl.po, share/po/pl.po, share/po/de.po, share/po/fi.po,
-	share/po/cy.po, share/po/da.po, share/po/ca.po, share/po/ar.po,
-	share/po/uz@Latn.po: updated Estonian and Spanish files; retrieved some
-	more old strings
-
-2004/08/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: complete 10.1-0.14mdk's changelog
-	add bug reference in 10.1-0.11mdk's changelog
-	10.1-0.9mdk
-
-	* share/po/fr.po: minor update
-	typo fix
-	update
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/advertising/18.pl, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/cs.po, share/po/uz@Latn.po: typo fix
-
-2004/08/25  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: DrakX ads: begin to add french translations from
-	Marketing team
-
-	* share/advertising/24.png, share/advertising/07.png,
-	share/advertising/26.png, share/advertising/16.png,
-	share/advertising/11.png, share/advertising/02.png,
-	share/advertising/23.png, share/advertising/15.png,
-	share/advertising/03.png, share/advertising/14.png,
-	share/advertising/25.png, share/advertising/19.png,
-	share/advertising/13-a.png, share/advertising/10.png,
-	share/advertising/04.png, share/advertising/27.png,
-	share/advertising/18.png, share/advertising/28.png,
-	share/advertising/13-b.png, share/advertising/22.png,
-	share/advertising/09.png, share/advertising/29.png,
-	share/advertising/30.png, share/advertising/06.png,
-	share/advertising/17.png, share/advertising/05.png,
-	share/advertising/21.png, share/advertising/20.png,
-	share/advertising/08.png, share/advertising/12.png: Images for 10.1
-
-2004/08/25  Funda Wang <fundawang at linux.net.cn>
-
-	* standalone/drakedm: Mandrake -> Mandrakelinux. Mark DM entries as
-	translatable.
-
-2004/08/25  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* tools/ddcprobe/vbe.c, tools/ddcprobe/vbe.h: Extensive rewrite and
-	cleanups to use the new int10 interface. Plus add
-	some 64-bit fixes and a last-resort means to get VBE/EDID information
-	from special -BOOT kernel during early boot.
-
-	* Xconfig/monitor.pm: Parse XFree86.log in last resort in case we have not
-	got any valuable
-	information at this stage from ddcxinfos.
-
-	* crypto.pm: Always prefer 64-bit packages for updates on biarch
-	platforms.
-
-	* tools/ddcprobe/ddcxinfos.c: Some cleanups
-	Extensive rewrite and cleanups to use the new int10 interface. Plus add
-	some 64-bit fixes and a last-resort means to get VBE/EDID information
-	from special -BOOT kernel during early boot.
-
-	* share/list.x86_64: i18n stuff at install time, probably make it common
-	with /LIB/
-
-	* tools/ddcprobe/x86emu/include/x86emu.h,
-	tools/ddcprobe/x86emu/include/x86emu/fpu_regs.h,
-	tools/ddcprobe/x86emu/include/x86emu/regs.h,
-	tools/ddcprobe/x86emu/include/x86emu/types.h: Add remaining x86 CPU
-	emulator bits
-
-	* partition_table.pm: add XFS to x86_64 known FS
-
-	* Xconfig/card.pm: handle lib64 drivers on x86-64
-
-	* install_steps_gtk.pm: default to 75dpi in order to get anti-aliased
-	fonts
-
-	* drakxtools.spec: update changelog dates to please rpm + add some
-	highlights to please titi
-	enough amd64 changes merged
-
-	* tools/ddcprobe/x86emu/x86emu/prim_asm.h, tools/ddcprobe/x86emu/sys.c,
-	tools/ddcprobe/x86emu/x86emu/fpu.h, tools/ddcprobe/x86emu/prim_ops.c,
-	tools/ddcprobe/x86emu/ops.c, tools/ddcprobe/x86emu/debug.c,
-	tools/ddcprobe/x86emu/x86emu/x86emui.h,
-	tools/ddcprobe/x86emu/x86emu/decode.h, tools/ddcprobe/x86emu/validate.c,
-	tools/ddcprobe/x86emu/x86emu/prim_ops.h, tools/ddcprobe/x86emu/decode.c,
-	tools/ddcprobe/x86emu/x86emu/debug.h, tools/ddcprobe/x86emu/fpu.c,
-	tools/ddcprobe/x86emu/LICENSE, tools/ddcprobe/x86emu/Makefile,
-	tools/ddcprobe/x86emu/x86emu/ops.h, tools/ddcprobe/x86emu/ops2.c: Add
-	x86 CPU emulator for BIOS int10 emulation on non x86 arches.
-
-	* tools/ddcprobe/minifind.h, tools/ddcprobe/of.c,
-	tools/ddcprobe/minifind.c: Get EDID block from OF (kudzu)
-
-	* c/smp.c: fix smp detection on x86_64
-
-	* Makefile: Handle PCMCIA on x86-64 too. Fix libs glob for live tree.
-	Don't ship with
-	"cdcom" modules archives in netinstallable trees.
-
-	* tools/ddcprobe/int10/vbios.h, tools/ddcprobe/int10/pci.h,
-	tools/ddcprobe/int10/Makefile, tools/ddcprobe/int10/i10_v86.c,
-	tools/ddcprobe/int10/i10_int.c, tools/ddcprobe/int10/i10_vbios.c,
-	tools/ddcprobe/int10/v86bios.h, tools/ddcprobe/int10/emu_vm86.c,
-	tools/ddcprobe/int10/i10_pci.c, tools/ddcprobe/int10/i10_io.c,
-	tools/ddcprobe/int10/vm86_struct.h, tools/ddcprobe/int10/README,
-	tools/ddcprobe/int10/AsmMacros.h: VGA softbootloader for Linux, uses an
-	x86 CPU emulator on non x86 arches.
-
-	* tools/ddcprobe/Makefile: Some cleanups
-	Raw merge from Kudzu for PPC. Christian, can you get something of it?
-	Only use VBE parsing code on x86 and x86_64.
-	Extensive rewrite and cleanups to use the new int10 interface. Plus add
-	some 64-bit fixes and a last-resort means to get VBE/EDID information
-	from special -BOOT kernel during early boot.
-
-	* install_steps.pm: handle nolapic, idle=poll, ide=nodma boot options
-
-2004/08/25  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl_consts.pm: fix Titi sux hard (add missing comma and spaces,
-	remove spurious
-	nameserver word)
-
-	* network/tools.pm: add missing spaces
-	add get_interface_type to guess interface type
-
-	* standalone/net_applet: avoid grep to grep itself, use perl
-
-	* install_any.pm: set TV flag when a TV card is detected to install
-	appropriate packages
-
-	* any.pm (selectCountry) fix Pixel broke country selection (bug 10938)
-
-	* standalone/service_harddrake: killer feature: restore bootsplash mode
-	don't abort miserably if configurator is code
-	fix typo
-
-	* standalone/drakconnect: use exists
-	(manage) use network::tools::get_interface_type instead of
-	/etc/sysconfig/drakconnect in order to avoid to recognize ppp0 as both
-	modem and adsl (bug 10772)
-
-	* tools/i386/netboot/davicom/stage2, tools/i386/netboot/grub,
-	tools/i386/netboot/via_rhine/pxegrub, tools/i386/netboot/natsemi/nbgrub,
-	tools/i386/netboot/davicom/nbgrub, tools/i386/netboot/cs89x0/stage2,
-	tools/i386/netboot/cs89x0/pxegrub, tools/i386/netboot/via_rhine/stage2,
-	tools/i386/netboot/davicom/pxegrub, tools/i386/netboot/natsemi/stage2,
-	tools/i386/netboot/via_rhine/nbgrub, tools/i386/netboot/davicom/stage1,
-	tools/i386/netboot/cs89x0/nbgrub, tools/i386/netboot/cs89x0/stage1,
-	tools/i386/netboot/via_rhine/stage1, tools/i386/netboot/natsemi/pxegrub,
-	tools/i386/netboot/natsemi/stage1: add new drivers, upgrade to grub-0.95
-
-	* tools/i386/netboot/ni5010/stage1, tools/i386/netboot/tiara/pxegrub,
-	tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/lance/nbgrub,
-	tools/i386/netboot/otulip/nbgrub, tools/i386/netboot/tulip/pxegrub,
-	tools/i386/netboot/ni5210/pxegrub, tools/i386/netboot/sis900/stage1,
-	tools/i386/netboot/otulip/stage1, tools/i386/netboot/ni6510/stage2,
-	tools/i386/netboot/eepro100/stage2, tools/i386/netboot/3c503/stage1,
-	tools/i386/netboot/w89c840/stage1, tools/i386/netboot/ni5010/nbgrub,
-	tools/i386/netboot/smc9000/stage2, tools/i386/netboot/ns8390/pxegrub,
-	tools/i386/netboot/lance/stage1, tools/i386/netboot/tulip/stage2,
-	tools/i386/netboot/ni5210/stage1, tools/i386/netboot/rtl8139/stage2,
-	tools/i386/netboot/ne/stage1, tools/i386/netboot/rtl8139/nbgrub,
-	tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/3c509/nbgrub,
-	tools/i386/netboot/eepro/stage1, tools/i386/netboot/lance/stage2,
-	tools/i386/netboot/otulip/stage2, tools/i386/netboot/ni5010/pxegrub,
-	tools/i386/netboot/ns8390/stage2, tools/i386/netboot/wd/nbgrub,
-	tools/i386/netboot/ne/pxegrub, tools/i386/netboot/depca/stage2,
-	tools/i386/netboot/tulip/nbgrub, tools/i386/netboot/lance/pxegrub,
-	tools/i386/netboot/tiara/stage1, tools/i386/netboot/epic100/pxegrub,
-	tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/3c90x/stage1,
-	tools/i386/netboot/3c507/nbgrub, tools/i386/netboot/3c529/stage2,
-	tools/i386/netboot/epic100/nbgrub, tools/i386/netboot/wd/stage2,
-	tools/i386/netboot/3c507/stage1, tools/i386/netboot/3c595/stage2,
-	tools/i386/netboot/3c529/stage1, tools/i386/netboot/depca/pxegrub,
-	tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/stage1,
-	tools/i386/netboot/w89c840/pxegrub, tools/i386/netboot/sk_g16/pxegrub,
-	tools/i386/netboot/3c509/stage1, tools/i386/netboot/eepro/stage2,
-	tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/3c595/pxegrub,
-	tools/i386/netboot/smc9000/stage1, tools/i386/netboot/w89c840/nbgrub,
-	tools/i386/netboot/3c503/nbgrub, tools/i386/netboot/ne/stage2,
-	tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/exos205/nbgrub,
-	tools/i386/netboot/tulip/stage1, tools/i386/netboot/wd/stage1,
-	tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c529/nbgrub,
-	tools/i386/netboot/ni6510/stage1, tools/i386/netboot/depca/nbgrub,
-	tools/i386/netboot/3c503/stage2, tools/i386/netboot/ni5010/stage2,
-	tools/i386/netboot/sis900/stage2, tools/i386/netboot/eepro/pxegrub,
-	tools/i386/netboot/3c90x/nbgrub, tools/i386/netboot/ni6510/nbgrub,
-	tools/i386/netboot/epic100/stage1, tools/i386/netboot/ne2100/pxegrub,
-	tools/i386/netboot/rtl8139/stage1, tools/i386/netboot/tiara/nbgrub,
-	tools/i386/netboot/ns8390/stage1, tools/i386/netboot/3c90x/pxegrub,
-	tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/nbgrub,
-	tools/i386/netboot/depca/stage1, tools/i386/netboot/3c509/pxegrub,
-	tools/i386/netboot/ne2100/stage1, tools/i386/netboot/sk_g16/stage1,
-	tools/i386/netboot/eepro100/nbgrub, tools/i386/netboot/tiara/stage2,
-	tools/i386/netboot/eepro100/stage1, tools/i386/netboot/ns8390/nbgrub,
-	tools/i386/netboot/ni5210/stage2, tools/i386/netboot/eepro100/pxegrub,
-	tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c509/stage2,
-	tools/i386/netboot/3c90x/stage2, tools/i386/netboot/3c595/nbgrub,
-	tools/i386/netboot/epic100/stage2, tools/i386/netboot/otulip/pxegrub,
-	tools/i386/netboot/eepro/nbgrub, tools/i386/netboot/3c529/pxegrub,
-	tools/i386/netboot/exos205/pxegrub, tools/i386/netboot/ne2100/nbgrub,
-	tools/i386/netboot/w89c840/stage2, tools/i386/netboot/smc9000/pxegrub,
-	tools/i386/netboot/wd/pxegrub, tools/i386/netboot/sis900/pxegrub,
-	tools/i386/netboot/exos205/stage2, tools/i386/netboot/sk_g16/nbgrub,
-	tools/i386/netboot/ne/nbgrub, tools/i386/netboot/smc9000/nbgrub: upgrade
-	to grub-0.95
-
-	* tools/i386/netboot/make_boot_network: warn if driver not available,
-	print available drivers
-
-	* tools/i386/netboot/makeImages: use grub-0.95
-	don't be a bastard, keep CVS directory
-
-	* tools/i386/netboot/stage1.via-rhine, tools/i386/netboot/stage1.3c59x,
-	tools/i386/netboot/stage2.3c59x, tools/i386/netboot/stage2.tulip,
-	tools/i386/netboot/stage1.tulip, tools/i386/netboot/stage2.rtl8139,
-	tools/i386/netboot/stage2.3c90x, tools/i386/netboot/stage1.eepro100,
-	tools/i386/netboot/stage2.via-rhine, tools/i386/netboot/stage1.rtl8139,
-	tools/i386/netboot/stage1.3c90x, tools/i386/netboot/stage2.eepro100:
-	delete obsolete files
-
-2004/08/25  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/data.pm, printer/printerdrake.pm: 
-	  - Moved initial package installation by printerdrake into
-	"install_spooler()" function, so all package installation done by
-	printerdrake (except printer/queue-type-specific, as HPOJ) is done in
-	one step.
-	  - First changes for daemonless CUPS client support.
-
-2004/08/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.13mdk
-	merge in lost 10-34.3.100mdk's changelog
-
-	* ugtk2.pm (create_packtable) fix cuted ads at install time
-
-	* network/adsl_consts.pm: fix siol's vci (hexa formated)
-
-	* Makefile.config: add listsupportedprinters
-
-	* standalone/service_harddrake: rename loop variable in order to prevent
-	trainee to be confused
-	support inline configuators
-	run proper program :-)
-	just go on if --force is passed
-
-2004/08/25  Gwenole Beauchesne  <gbeauchesne at mandrakesoft.com>
-
-	* tools/ddcprobe/vbe.c, tools/ddcprobe/vbe.h, tools/ddcprobe/Makefile,
-	tools/ddcprobe/ddcxinfos.c: Extensive rewrite and cleanups to use the
-	new int10 interface. Plus add
-	some 64-bit fixes and a last-resort means to get VBE/EDID information
-	from special -BOOT kernel during early boot.
-
-	* Xconfig/monitor.pm: Parse XFree86.log in last resort in case we have not
-	got any valuable
-	information at this stage from ddcxinfos.
-
-	* crypto.pm: Always prefer 64-bit packages for updates on biarch
-	platforms.
-
-	* share/list.x86_64: i18n stuff at install time, probably make it common
-	with /LIB/
-
-	* tools/ddcprobe/x86emu/include/x86emu.h,
-	tools/ddcprobe/x86emu/include/x86emu/fpu_regs.h,
-	tools/ddcprobe/x86emu/include/x86emu/regs.h,
-	tools/ddcprobe/x86emu/include/x86emu/types.h: Add remaining x86 CPU
-	emulator bits
-
-	* partition_table.pm: add XFS to x86_64 known FS
-
-	* Xconfig/card.pm: handle lib64 drivers on x86-64
-
-	* install_steps_gtk.pm: default to 75dpi in order to get anti-aliased
-	fonts
-
-	* tools/ddcprobe/x86emu/x86emu/prim_asm.h, tools/ddcprobe/x86emu/sys.c,
-	tools/ddcprobe/x86emu/x86emu/fpu.h, tools/ddcprobe/x86emu/prim_ops.c,
-	tools/ddcprobe/x86emu/ops.c, tools/ddcprobe/x86emu/debug.c,
-	tools/ddcprobe/x86emu/x86emu/x86emui.h,
-	tools/ddcprobe/x86emu/x86emu/decode.h, tools/ddcprobe/x86emu/validate.c,
-	tools/ddcprobe/x86emu/x86emu/prim_ops.h, tools/ddcprobe/x86emu/decode.c,
-	tools/ddcprobe/x86emu/x86emu/debug.h, tools/ddcprobe/x86emu/fpu.c,
-	tools/ddcprobe/x86emu/LICENSE, tools/ddcprobe/x86emu/Makefile,
-	tools/ddcprobe/x86emu/x86emu/ops.h, tools/ddcprobe/x86emu/ops2.c: Add
-	x86 CPU emulator for BIOS int10 emulation on non x86 arches.
-
-	* drakxtools.spec: update changelog dates to please rpm + add some
-	highlights to please titi
-	enough amd64 changes merged
-
-	* c/smp.c: fix smp detection on x86_64
-
-	* tools/ddcprobe/int10/vbios.h, tools/ddcprobe/int10/pci.h,
-	tools/ddcprobe/int10/Makefile, tools/ddcprobe/int10/i10_v86.c,
-	tools/ddcprobe/int10/i10_int.c, tools/ddcprobe/int10/i10_vbios.c,
-	tools/ddcprobe/int10/v86bios.h, tools/ddcprobe/int10/emu_vm86.c,
-	tools/ddcprobe/int10/i10_pci.c, tools/ddcprobe/int10/i10_io.c,
-	tools/ddcprobe/int10/vm86_struct.h, tools/ddcprobe/int10/README,
-	tools/ddcprobe/int10/AsmMacros.h: VGA softbootloader for Linux, uses an
-	x86 CPU emulator on non x86 arches.
-
-	* Makefile: Handle PCMCIA on x86-64 too. Fix libs glob for live tree.
-	Don't ship with
-	"cdcom" modules archives in netinstallable trees.
-
-	* install_steps.pm: handle nolapic, idle=poll, ide=nodma boot options
-
-2004/08/25  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 604
-	(not finished)
-
-2004/08/25  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl_consts.pm: fix Titi sux hard (add missing comma and spaces,
-	remove spurious
-	nameserver word)
-
-	* network/tools.pm: add missing spaces
-	add get_interface_type to guess interface type
-
-	* any.pm (selectCountry) fix Pixel broke country selection (bug 10938)
-
-	* standalone/drakconnect: use exists
-	(manage) use network::tools::get_interface_type instead of
-	/etc/sysconfig/drakconnect in order to avoid to recognize ppp0 as both
-	modem and adsl (bug 10772)
-
-2004/08/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.13mdk
-	merge in lost 10-34.3.100mdk's changelog
-
-	* network/adsl_consts.pm: fix siol's vci (hexa formated)
-
-	* Makefile.config: add listsupportedprinters
-
-2004/08/24  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-	Updated Simplified Chinese translation
-
-2004/08/24  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: mmodem
-
-2004/08/24  Olivier Blin <oblin at mandrakesoft.com>
-
-	* modules/modprobe_conf.pm, modules/any_conf.pm, modules/modules_conf.pm:
-	really parse modules file according to its type when reading it (always
-	call $conf->read, split modules::any_conf::read in
-	modules::any_conf::read_handled)
-
-	* printer/detect.pm (local_detect) fix modules conf parsing
-
-	* install_steps.pm: drop non-standard tld (localdomain)
-
-	* network/network.pm (add2hosts) use difference2
-	(add2hosts) make it more readable
-	(add2hosts) rework parsing
-	i sux
-	(configureNetwork2) always add an hostname alias and add it on the
-	loopback device (bug 10345)
-	(add2hosts) allow multiple aliases per host
-	(add2hosts) regexp fixes
-
-	* standalone/drakconnect (configure_net) do not ask the user to do an
-	inifinite looping in MCC ...
-
-	* detect_devices.pm (usbMice, usbWacom) wacom devices can have 'wacom' as
-	driver
-
-	* mouse.pm, Xconfig/xfree.pm: synaptics touchpad support
-
-2004/08/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated Japanese file; retrieved
-	some old translation strings
-
-	* share/po/nb.po: updated Bokmål file
-	updated Japanese file; retrieved some old translation strings
-
-2004/08/24  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Special treatments for print queues with the "lbp660" and "ml85p"
-	drivers. Here the driver communicates directly with the printer instead
-	of sending the output to a CUPS backend.
-	  - Make sure that queues which have special treatment, as for example
-	the ones using "lbp660" and "ml85p", do not try to open message indows
-	when the print queues are auto-generated by dynamic/hotplug.
-	  - If the user gets an error/warning message during setup of a queue
-	with special treatment, he is automatically put back to the previous
-	step in the add-printer wizard.
-	  - Let warning messages (funktion "ask_warn()") never embed in the
-	add-printer wizard, as they have no "Previous" button in the wizard.
-	Fixed "ask_from_()" calls in "config_cups()" (Thanks Olivier for
-	breaking it in your perl-checker clean-up in 1.119 --> 1.120).
-
-	* standalone/listsupportedprinters: Added "listsupportedprinters", a
-	simple program which runs the printer model list function of
-	printerdrake to get a list of supported printer models on STDOUT (Mainly
-	for auto-generation of Mandrakelinux hardware support database).
-
-	* standalone/printerdrake: Version number.
-
-2004/08/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm (write) use newly introduced IM2packages() in order to install
-	proper
-	packages depending on (locale, input method) tuple
-	(IM2packages) introduce it in order to know which packages need to be
-	installed for a (locale, input method) tuple
-
-	* standalone/drakroam: fix crash when config directory does not exist
-	(#10935)
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, standalone/drakups, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/vi.po, share/po/fr.po, share/po/ta.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/el.po,
-	share/po/bg.po, share/po/cs.po, share/po/uz@Latn.po: typo fix
-
-	* network/adsl_consts.pm: add Siol (the bigest ADSL provider in Slovenia)
-	in ADSL providers DB
-	(Gregor Pirnaver <gregor.pirnaver@mandrakeprinas.org>)
-
-2004/08/23  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/08/23  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 598
-	If you chose
-
-2004/08/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* crypto.pm (getPackages) use new mirror structure filepaths
-
-	* standalone/net_monitor: watch connection time, not disconnection time
-	:-)
-
-	* commands.pm (modprobe) use load_with_options instead of load_raw to take
-	care of
-	module dependencies
-
-	* network/network.pm (add2hosts) make it work with sub hostnames
-
-2004/08/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* standalone/drakvpn, standalone/drakclock: no space before question marks
-	in English
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/cs.po, share/po/uz@Latn.po: updated pot file
-
-	* install_steps_interactive.pm: no space before a question mark in English
-
-	* network/netconnect.pm: no space before question marks in English
-	no space before a question mark in English
-
-2004/08/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.12mdk
-
-	* printer/printerdrake.pm: language names are upcase in english
-	aspell's typo fixes
-
-	* Xconfig/card.pm (to_raw_X) do not set DRI mode anymore; this is not
-	needed anymore
-	with PAM
-
-	* Makefile.config: add autosetupprintqueues
-
-	* network/netconnect.pm, standalone/drakvpn, standalone/drakTermServ,
-	standalone/drakbackup, standalone/drakconnect: protocol names, trademark
-	and acronyms should be upcase
-	aspell's typo fixes
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/da.po, share/po/ca.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/mn.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, share/po/nl.po, share/po/tl.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/uz@Latn.po: language names are upcase in
-	english
-	protocol names, trademark and acronyms should be upcase
-	aspell's typo fixes
-
-	* standalone/drakpxe, network/adsl.pm, network/adsl_consts.pm: protocol
-	names, trademark and acronyms should be upcase
-
-	* standalone/logdrake, standalone.pm, standalone/draksound,
-	install_any.pm, standalone/drakxtv, standalone/draksec,
-	standalone/harddrake2, install_interactive.pm, any.pm,
-	harddrake/sound.pm, services.pm, install_messages.pm,
-	standalone/drakfont: aspell's typo fixes
-
-2004/08/22  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-	* share/po/Makefile: adjust Makefile to fit doc module zh_cn
-
-2004/08/22  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/08/21  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/08/21  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/autosetupprintqueues, printer/main.pm,
-	printer/printerdrake.pm: 
-	  - Added fully automatic, non-interactive, X-less print queue set up by
-	the "autosetupprintqueues" command, preferrably to be started by
-	hotplug.
-	  - Typo correction.
-	  - Correction of file check for package installation.
-
-2004/08/20  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: add a fixme comment
-	update mac address in network::ethernet::get_eth_cards to be sure iftab
-	is always up-to-date
-
-	* share/rpmsrate: install kdeutils-klaptop on laptops
-
-	* standalone/net_monitor: do not assume internet isn't configured if
-	connect scripts do not
-	exist (they're obsolete), fix connect button sensitivity
-
-	* pkgs.pm (read_rpmsrate) support the TYPE keyword, using
-	detect_devices::matching_type()
-
-	* install_steps.pm (configureNetwork) net_cnx_* scripts are dead
-
-	* share/po/fr.po: update adsl message (partial fix of bug 5778)
-
-	* network/ethernet.pm: update mac address in
-	network::ethernet::get_eth_cards to be sure iftab is always up-to-date
-
-	* network/netconnect.pm (network_on_boot step) do not create ifcfg-ippp0
-	quite randomly
-	($after_start_on_boot_step) remove obsolete call to write_cnx_script
-	fix nonsense in reconfigure message (#10827)
-
-	* detect_devices.pm: add matching_type() to introduce the TYPE keyword in
-	rpmsrate
-	(supports only laptop type for now)
-	(firewire_probe) use sysfs to detect firewire devices (eth1394 should be
-	detected now)
-	fix nasty typo
-
-2004/08/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* standalone/drakvpn: Fixed English typos
-	fixed English typos (no space before colon)
-
-	* standalone/drakups: fixed English typo
-
-	* share/advertising/05.pl: standardized on using the asterisk as bullet
-	list for all advertisings
-
-2004/08/20  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Use standard mouse wait/normal. Make $cmd_line
-	a global. perl_checker fixes.
-
-2004/08/20  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Fixed problem of Brother laser printer on parallel port not showing
-	its name in auto-detection result.
-
-2004/08/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: add BuildRequires: rpm-devel b/c of c/stuff.xs
-	(Christiaan Welvaart)
-
-	* share/po/Makefile: fix drakxtools build
-
-	* network/netconnect.pm: rollback (a string was removed so translators
-	still have to
-	investigate anyway...)
-	rollback 'n split in order to reduce pressure on translators
-
-2004/08/19  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/printerdrake: perl_checker fixes
-
-	* printer/printerdrake.pm: always close the wizard_window, die when an
-	exception has been raised
-	perl_checker fixes
-	perl_checker fixes
-
-2004/08/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/am.po: updated Amharic file
-
-	* share/po/eu.po: updated Basque file
-
-	* share/po/sr.po: fixed cyrillic encoding mess with Serbian translations
-
-	* share/po/tg.po, share/po/uk.po, share/po/uz.po, share/po/ru.po,
-	share/po/mk.po, share/po/bg.po: fixed wrong cyrillic encoding chars
-
-2004/08/19  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Let printer name, description, location be entered after determining
-	the model in the add printer wizard
-	  - Let default print queue name be derived from the model instead of
-	being "Printer", "Printer1", ...
-	  - Simplified print queue name generation in non-interactive printer
-	setup
-	  - Fixed "Previous" button in the test page step of the add printer
-	wizard.
-
-2004/08/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.11mdk
-
-2004/08/19  Erwan Velu  <erwan at mandrakesoft.com>
-
-	* share/rpmsrate: removing OpenIPMI as default
-
-2004/08/19  Olivier Blin <oblin at mandrakesoft.com>
-
-	* printer/printerdrake.pm: always close the wizard_window, die when an
-	exception has been raised
-	perl_checker fixes
-	perl_checker fixes
-	workaround not to call c::upgrade_utf8 on read-only variables
-
-	* standalone/printerdrake: perl_checker fixes
-
-	* printer/main.pm: workaround not to call c::upgrade_utf8 on read-only
-	variables
-	perl_checker fixes
-
-2004/08/19  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/xfree.pm: fix keyboarddrake not modifying xkb
-
-2004/08/19  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Move code in another function
-
-	* install2: Wrong comment
-
-2004/08/19  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/detect.pm: Fix problem of the "usblp" kernel module not loaded
-	before local printer auto-detection.
-
-	* printer/main.pm, printer/printerdrake.pm, printer/office.pm,
-	printer/gimp.pm: 
-	  - Removed installation of "gimpprint" package, it is part of GIMP
-	2.0.x now.
-	  - Removed configuration of applications, GIMP and OpenOffice.org are
-	patched now so that they do not need configuration of print queues any
-	more.
-	  - Text fix for scanners in HP's multi-function devices.
-
-2004/08/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* printer/main.pm (connectionstr) workaround perl bug
-
-	* standalone/draksplash, share/po/bn.po, share/po/ms.po, share/po/sk.po,
-	share/po/gl.po, share/po/pt_BR.po, share/po/th.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, network/netconnect.pm, share/po/be.po,
-	standalone/drakvpn, standalone/drakboot, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/da.po, share/po/ca.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, standalone/drakedm, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po,
-	standalone/drakbug, share/po/it.po, share/po/eu.po, share/po/es.po,
-	network/adsl.pm, share/po/lv.po, share/po/hu.po,
-	printer/printerdrake.pm, standalone/drakxtv, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po,
-	standalone/service_harddrake_confirm, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/mn.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, security/help.pm, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, standalone/drakperm, share/po/nl.po,
-	share/po/tl.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, standalone/scannerdrake,
-	share/po/uz@Latn.po: typo fixes
-
-	* Makefile.drakxtools: fix drakxtools build (do not include
-	../Makefile.config)
-
-	* drakxtools.spec: 10.1-0.11mdk
-
-	* share/rpmsrate: reduce non default (aka old default ones) IM priority
-
-2004/08/19  Youcef Rabah Rahal <rahal at arabeyes.org>
-
-	* share/po/ar.po: Sync with Arabeyes CVS
-
-2004/08/18  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm (write_interface_conf) use mac_ieee1394 descriptor in
-	iftab for firewire links
-
-	* standalone/service_harddrake, harddrake/data.pm: check usb controllers
-	on boot
-
-2004/08/18  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: restrict the wait message (so that it's dead when an error
-	message is displayed)
-	fix typo
-	fix typos
-	  - any::setupBootloader() used to call bootloader::install() whereas
-	install_steps_interactive::setupBootloader() could call it once again
-	(but this code seems dead though)
-	  - create any::installBootloader() out of what was done in the end of
-	any::setupBootloader() but also in  install_steps_interactive and
-	drakboot (which handled the error that could occur in
-	bootloader::install())
-
-	* standalone/drakboot, install_steps_interactive.pm: 
-	  - any::setupBootloader() used to call bootloader::install() whereas
-	install_steps_interactive::setupBootloader() could call it once again
-	(but this code seems dead though)
-	  - create any::installBootloader() out of what was done in the end of
-	any::setupBootloader() but also in  install_steps_interactive and
-	drakboot (which handled the error that could occur in
-	bootloader::install())
-
-	* install_steps_gtk.pm: hide $release_notes_scroll by default, it's
-	visually cleaner
-
-	* ugtk2.pm: fix blino sucks
-
-	* detect_devices.pm: perl_checker compliance
-
-2004/08/18  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* ugtk2.pm: Make the status field optional in treeviews
-
-2004/08/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm, any.pm: fix default IM setting when switching language
-
-	* drakxtools.spec: add bug reference
-	10.1-0.10mdk
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/po/uz@Latn.po: merge in s/%d/%s/ fix in net_applet's message
-
-2004/08/18  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: restrict the wait message (so that it's dead when an error
-	message is displayed)
-	fix typo
-	fix typos
-	  - any::setupBootloader() used to call bootloader::install() whereas
-	install_steps_interactive::setupBootloader() could call it once again
-	(but this code seems dead though)
-	  - create any::installBootloader() out of what was done in the end of
-	any::setupBootloader() but also in  install_steps_interactive and
-	drakboot (which handled the error that could occur in
-	bootloader::install())
-	create install_acpi_pkgs() and use it for auto_installs
-
-	* standalone/drakboot, install_steps_interactive.pm: 
-	  - any::setupBootloader() used to call bootloader::install() whereas
-	install_steps_interactive::setupBootloader() could call it once again
-	(but this code seems dead though)
-	  - create any::installBootloader() out of what was done in the end of
-	any::setupBootloader() but also in  install_steps_interactive and
-	drakboot (which handled the error that could occur in
-	bootloader::install())
-
-	* install_steps_gtk.pm: hide $release_notes_scroll by default, it's
-	visually cleaner
-
-	* ugtk2.pm: fix blino sucks
-
-	* detect_devices.pm: perl_checker compliance
-
-	* install_steps.pm: force ACPI on a laptop with recent bios
-	create install_acpi_pkgs() and use it for auto_installs
-
-2004/08/18  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* ugtk2.pm: Make the status field optional in treeviews
-
-2004/08/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm, any.pm: fix default IM setting when switching language
-
-	* harddrake/data.pm: add PCMCIA controllers class
-
-	* drakxtools.spec: 10.1-0.10mdk
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/mn.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/po/uz@Latn.po: merge in s/%d/%s/ fix in net_applet's message
-
-2004/08/18  Olivier Blin <oblin at mandrakesoft.com>
-
-	* harddrake/data.pm: use network::ethernet::get_eth_categories in ethernet
-	detector
-
-2004/08/18  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: restrict the wait message (so that it's dead when an error
-	message is displayed)
-	fix typo
-	fix typos
-	  - any::setupBootloader() used to call bootloader::install() whereas
-	install_steps_interactive::setupBootloader() could call it once again
-	(but this code seems dead though)
-	  - create any::installBootloader() out of what was done in the end of
-	any::setupBootloader() but also in  install_steps_interactive and
-	drakboot (which handled the error that could occur in
-	bootloader::install())
-	create install_acpi_pkgs() and use it for auto_installs
-
-	* standalone/drakboot, install_steps_interactive.pm: 
-	  - any::setupBootloader() used to call bootloader::install() whereas
-	install_steps_interactive::setupBootloader() could call it once again
-	(but this code seems dead though)
-	  - create any::installBootloader() out of what was done in the end of
-	any::setupBootloader() but also in  install_steps_interactive and
-	drakboot (which handled the error that could occur in
-	bootloader::install())
-
-	* install_steps_gtk.pm: hide $release_notes_scroll by default, it's
-	visually cleaner
-
-	* ugtk2.pm: fix blino sucks
-
-	* detect_devices.pm: perl_checker compliance
-	use dmidecode to detect isLaptop()
-
-	* .perl_checker: Getopt::Long is now faked
-
-	* install_steps.pm: force ACPI on a laptop with recent bios
-	create install_acpi_pkgs() and use it for auto_installs
-
-2004/08/18  Reinout van Schouwen  <reinout at cs.vu.nl>
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/08/18  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* ugtk2.pm: Make the status field optional in treeviews
-
-2004/08/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: add PCMCIA controllers class
-
-2004/08/17  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* c/smp-dmi.c: rework smp-dmi, add dmi memory detection suppport
-
-	* c/stuff.xs.pl: revert my last bad commit
-	rework smp-dmi, add dmi memory detection suppport
-
-2004/08/17  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: get rid off the 'ifcfg-Manually load a driver'
-	file ...
-	use network::ethernet::get_eth_categories() when needed
-
-	* standalone/net_applet: fix titi sux, fix I sux
-	use network::tools::get_internet_connection
-
-	* network/adsl.pm: fix sagem pty quoting
-	sagem: don't run pppoa if the ethernet interface isn't created and use
-	a reduced timeout (1 second) so that boot doesn't take forever if
-	modem can't be synchronized (maxfail * timeout was equal to 25
-	minutes)
-
-	* network/tools.pm: add new functions to make internet connection tests
-	easier
-	drop network::tools::reread_net_conf
-
-	* network/ethernet.pm: use network::ethernet::get_eth_categories() when
-	needed
-	add network::ethernet::get_eth_categories
-	drop network::ethernet::conf_network_card_backend
-	(conf_network_card_backend) set NET_INTERFACE too
-
-	* network/network.pm: use network::ethernet::get_eth_categories() when
-	needed
-	(easy_dhcp) probe all network sub categories
-	(easy_dhcp) don't use network::ethernet::conf_network_card_backend
-	(easy_dhcp) sort devices and keep only eth[0-9]+ devices
-	(easy_dhcp) allow configured interface not to be eth0 and make sure it
-	uses ethernet
-	(write_interface_conf) use unspec descriptor in iftab if link isn't
-	ether
-	fix suckiness (write proper iftab)
-
-2004/08/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bs.po, share/po/cs.po: updated Bosnian and Czech files
-
-2004/08/17  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/bootloader-config: better error handling
-
-	* install2.pm, install_steps_interactive.pm: $::corporate is dead
-	get release_notes at beginning of
-	install_steps_interactive::acceptLicense(), even when
-	useless_thing_accepted
-
-	* tools/make_mdkinst_stage2: don't remove /usr/share/locale anymore, we
-	use the same locale for all langs
-
-	* bootloader.pm: 
-	  - fix short label with extension. eg: have "linux-smp" instead of
-	"linuxsmp"
-	  - this fixes choosing the default specialised kernel
-
-	* fs/type.pm: cleanly handle the case when {pt_type} is 0
-
-	* share/gen_locales.sh, share/gen_locales.pl, share/list, share/Makefile,
-	Makefile: 
-	  - don't generate locales.tar.bz2, do the same directly (since it's now
-	quite simple)
-	  - when using ramdisk, we now have all the locales, no need to handle
-	it specially
-
-	* crypto.pm: $::corporate is dead
-
-	* lang.pm: lang::list() is unused, dropping it
-	  - don't generate locales.tar.bz2, do the same directly (since it's now
-	quite simple)
-	  - when using ramdisk, we now have all the locales, no need to handle
-	it specially
-
-	* install_steps_gtk.pm: add release notes during install of packages
-	remove dead code
-
-2004/08/17  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Display the list of media already taken into accounts
-	when asking for
-	supplementary media
-	perl_checker fix
-	Supplementary cd-roms don't need to have a rpmsrate / compssUsers.pl
-
-	* pkgs.pm: Log the reason why the rpms aren't installed
-
-2004/08/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.9mdk
-
-	* network/network.pm (easy_dhcp) handle pcmci card too
-
-	* share/rpmsrate: fix rpmsrate regarding s2u
-
-	* share/po/fr.po: update
-
-2004/08/16  Olivier Blin <oblin at mandrakesoft.com>
-
-	* install_steps_interactive.pm: alsaconf is in alsa-utils package (bug
-	10358)
-
-	* mdk-stage1/probing.c (probe_that_type) do not prompt in
-	discovered_device() before loading usb controllers (they're not network
-	devices)
-
-	* network/netconnect.pm: NET_INTERFACE should be ppp0 for pppoe too
-	add reminder about external ISDN modems (special init string)
-
-	* network/adsl.pm: do not write noipdefault in /etc/ppp/peers/ppp0 for
-	pptp connections
-
-	* standalone/drakroam: merge with waproamd version
-	add comments from waproamd version
-
-2004/08/16  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/xfree.pm: handle /etc/X11/xorg.conf
-
-	* Xconfig/various.pm: we don't use XF86Config-4 anymore
-
-2004/08/16  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_probe_info) net_cnx_up is obsolete, pptp info is
-	available in
-	ppp config files
-	(adsl_conf_backend) don't write net cnx scripts, internet service
-	should be dead
-	remove useless assignment (already done in adsl_protocol step)
-	fix pppoe with sagem (write ETH=`/usr/sbin/eaglectrl -i` instead of
-	ETH=sagem)
-
-2004/08/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: changed a keyboard name
-
-2004/08/16  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/card.pm: replace freeDriver with freedriver (stage2 para are
-	lower cased)
-	fix pixel sucks
-	replace freeDriver with freedriver (stage2 para are lower cased)
-
-	* install2.pm: replace freeDriver with freedriver (stage2 para are lower
-	cased)
-	modules::load doesn't accept options anymore, use
-	modules::load_with_options() (bugzilla #10778)
-	replace freeDriver with freedriver (stage2 para are lower cased)
-
-	* bootloader.pm: help debugging detectloader
-
-	* install_any.pm: better URLPREFIX parsing regexp (handle URLPREFIX =
-	"http://leia")
-	replace freeDriver with freedriver (stage2 para are lower cased)
-	replace freeDriver with freedriver (stage2 para are lower cased)
-
-	* share/compssUsers.pl: field is {default_selected}, not {selected}
-
-	* modules.pm: add load_with_options()
-
-	* network/netconnect.pm: don't configure firewall after configuring
-	network during install
-	(in summary you can configure firewall directly)
-
-2004/08/15  Jos� JORGE <jjorge at free.fr>
-
-	* share/po/pt.po: beta rush
-
-2004/08/15  Keld J�rn Simonsen  <keld at dkuug.dk>
-
-	* share/po/da.po: updates
-	indexhtml/po/da.po soft/mdkhtmlbrowser/po/da.po
-	soft/mdkonline/po/da.po soft/menudrake/po/da.po
-	soft/rpmdrake/po/da.po soft/urpmi/po/da.po
-	soft/userdrake2/po/da.po soft/wizard_perl/po/da.po
-	gi/perl-install/share/po/da.po
-
-2004/08/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/vi.po: updated Vietnamese file
-
-	* share/po/et.po: updated Estonian file
-
-	* share/po/it.po, share/po/help-it.pot: updated Italian file
-
-2004/08/14  Funda Wang <fundawang at linux.net.cn>
-
-	* share/po/help_xml2pm.pl: zh_CN -> zh_cn to fit CVS module
-
-2004/08/14  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 591
-	Generate auto
-
-2004/08/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ky.po, share/po/ms.po, share/po/id.po, share/po/mk.po,
-	share/po/fur.po, share/po/th.po, share/po/is.po, share/po/sl.po,
-	share/po/hi.po, share/po/zh_TW.po, share/po/hr.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/ga.po, share/po/be.po, share/po/mn.po,
-	share/po/am.po, share/po/ko.po, share/po/sr.po, share/po/he.po,
-	share/po/lt.po, share/po/eo.po, share/po/lv.po, share/po/el.po: fixed
-	special "<control>" entries;
-	included translations for various standard menu entries (File, Edit,
-	Help,...)
-
-	* share/po/ta.po: small fix
-	fixed special "<control>" entries;
-	included translations for various standard menu entries (File, Edit,
-	Help,...)
-
-	* share/po/nb.po, share/po/uz.po, share/po/uz@Latn.po: fixed shortcut
-	entries ("<control>...")
-
-	* share/po/tg.po: fixed shortcut entries ("<control>...")
-	fixed special "<control>" entries;
-	included translations for various standard menu entries (File, Edit,
-	Help,...)
-
-	* share/po/bn.po: fixed special "<control>" entries;
-	included translations for various standard menu entries (File, Edit,
-	Help,...)
-	updated Bengali file
-
-2004/08/13  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot: misc cleanups
-	make perl_checker happy
-	perl_checker fix
-	(drakboot --splash) add enable_framebuffer to allow to choose a video
-	mode if boot isn't graphical
-
-	* any.pm: add and use bootloader::set_append_netprofile() and
-	bootloader::get_append_netprofile()
-	remove old linuxconf profile code
-	(setupBootloader__entries) allow to choose net profile in advanced mode
-
-	* bootloader.pm: add and use bootloader::set_append_netprofile() and
-	bootloader::get_append_netprofile()
-	remove old linuxconf profile code
-	add remove_append_dict
-
-2004/08/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: changed arabic font to roya.ttf (from
-	fonts-ttf-arabic-farsi) which
-	also cover Farsi (fa).
-	updated Nimbus Sans L to cooker version, and edited it to add
-	the two missing letters needed to full latin and cyrillic coverage
-	(the two letters were latin schwa (for Azeri) and cyrillic che
-	with descender (for Tajik))
-
-	* lang.pm: enabled Turkmen and Tatar; prepared various other languages
-	(waiting for
-	lang-*.png pixmap).
-	updated the kde-i18n list with the newly available languages
-
-2004/08/13  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: 
-	  - bootloader::remove_append_dict() is not useful,
-	bootloader::set_append() can do the same
-	  - don't modify anything before "Ok" is clicked
-	  - set_append with $netprofile eq '' will remove parameter PROFILE=xxx,
-	which is what we want
-
-	* any.pm: perl_checker compliance
-	  - bootloader::remove_append_dict() is not useful,
-	bootloader::set_append() can do the same
-	  - don't modify anything before "Ok" is clicked
-	  - set_append with $netprofile eq '' will remove parameter PROFILE=xxx,
-	which is what we want
-
-	* install_steps_gtk.pm: perl_checker compliance
-	  - don't use compssUsers anymore, use compssUsers.pl
-	  - code to display compssUsers choices is now in compssUsers.pl
-	  - {compssUsers} is now a list instead of a hash, and so drop
-	{compssUsersSorted}
-	  - rename {compssUsersChoice} to {rpmsrate_flags_chosen} (better name)
-	  - i18n_compssUsers is no more needed, add share/compssUsers.pl* to
-	ALLPMS
-
-	* share/compssUsers.pl, Makefile.config, share/compssUsers, pkgs.pm,
-	install2.pm, share/po/Makefile, install_steps.pm,
-	share/po/i18n_compssUsers, install_any.pm, Makefile,
-	install_steps_interactive.pm: 
-	  - don't use compssUsers anymore, use compssUsers.pl
-	  - code to display compssUsers choices is now in compssUsers.pl
-	  - {compssUsers} is now a list instead of a hash, and so drop
-	{compssUsersSorted}
-	  - rename {compssUsersChoice} to {rpmsrate_flags_chosen} (better name)
-	  - i18n_compssUsers is no more needed, add share/compssUsers.pl* to
-	ALLPMS
-
-2004/08/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: One further step towards the ftp supplementary media
-
-2004/08/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/cy.po: update
-	update
-
-	* any.pm (set_autologin) parameters are optionnal, writing empty variables
-	in
-	kdmrc and the like means disabled autologin
-
-	* share/po/fr.po: update
-
-	* standalone/drakboot (updateAutologin) clean any::set_autologin() call
-
-2004/08/13  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/dis-06.pl, share/advertising/dis-05.png,
-	share/advertising/25.pl, share/advertising/dwd-08.pl,
-	share/advertising/pwp-02.pl, share/advertising/dwd-04.pl,
-	share/advertising/03.png, share/advertising/25.png,
-	share/advertising/13-b.png, share/advertising/pwp-05.png,
-	share/advertising/dis-11.pl, share/advertising/dwd-04.png,
-	share/advertising/30.png, share/advertising/dis-10.pl,
-	share/advertising/ppp-11.pl, share/advertising/27.pl,
-	share/advertising/14.pl, share/advertising/dwd-03.png,
-	share/advertising/08.pl, share/advertising/dis-05.pl,
-	share/advertising/22.pl, share/advertising/dis-03.png,
-	share/advertising/10.pl, share/advertising/dwd-01.pl,
-	share/advertising/18.pl, share/advertising/dwd-08.png,
-	share/advertising/dis-01.pl, share/advertising/pwp-02.png,
-	share/advertising/28.png, share/advertising/09.png,
-	share/advertising/ppp-06.pl, share/advertising/29.png,
-	share/advertising/ppp-07.png, share/advertising/list-dwd,
-	share/advertising/06.png, share/advertising/pwp-09.png,
-	share/advertising/dis-03.pl, share/advertising/dwd-09.png,
-	share/advertising/01.png, share/advertising/list-dis,
-	share/advertising/pwp-01.png, share/advertising/02.png,
-	share/advertising/15.png, share/advertising/23.png,
-	share/advertising/29.pl, share/advertising/ppp-03.pl,
-	share/advertising/07.pl, share/advertising/04.png,
-	share/advertising/13-a.png, share/advertising/09.pl,
-	share/advertising/17.pl, share/advertising/13-b.pl,
-	share/advertising/ppp-01.png, share/advertising/04.pl,
-	share/advertising/ppp-08.pl, share/advertising/dwd-06.pl,
-	share/advertising/ppp-05.png, share/advertising/ppp-02.pl,
-	share/advertising/12.png, share/advertising/24.pl,
-	share/advertising/12.pl, share/advertising/26.pl,
-	share/advertising/dis-09.png, share/advertising/16.png,
-	share/advertising/ppp-11.png, share/advertising/14.png,
-	share/advertising/list-pwp, share/advertising/ppp-09.png,
-	share/advertising/dis-06.png, share/advertising/dis-11.png,
-	share/advertising/10.png, share/advertising/dis-04.png,
-	share/advertising/19.pl, share/advertising/pwp-10.png,
-	share/advertising/05.pl, share/advertising/ppp-05.pl,
-	share/advertising/ppp-01.pl, share/advertising/dis-09.pl,
-	share/advertising/pwp-03.pl, share/advertising/dwd-05.png,
-	share/advertising/pwp-04.pl, share/advertising/20.png,
-	share/advertising/dis-10.png, share/advertising/dis-02.pl,
-	share/advertising/dwd-07.png, share/advertising/dis-04.pl,
-	share/advertising/ppp-06.png, share/advertising/20.pl,
-	share/advertising/02.pl, share/advertising/list-ppp,
-	share/advertising/21.png, share/advertising/pwp-07.pl,
-	share/advertising/pwp-08.png, share/advertising/07.png,
-	share/advertising/26.png, share/advertising/dwd-02.pl,
-	share/advertising/30.pl, share/advertising/ppp-09.pl,
-	share/advertising/16.pl, share/advertising/pwp-06.png,
-	share/advertising/dis-07.pl, share/advertising/01.pl,
-	share/advertising/drweb.pl, share/advertising/dwd-05.pl,
-	share/advertising/drweb.png, share/advertising/ppp-10.pl,
-	share/advertising/pwp-07.png, share/advertising/pwp-09.pl,
-	share/advertising/pwp-04.png, share/advertising/pwp-05.pl,
-	share/advertising/dis-01.png, share/advertising/23.pl,
-	share/advertising/dwd-06.png, share/advertising/dis-08.png,
-	share/advertising/ppp-08.png, share/advertising/19.png,
-	share/advertising/dis-08.pl, share/advertising/dwd-02.png,
-	share/advertising/pwp-06.pl, share/advertising/27.png,
-	share/advertising/dis-07.png, share/advertising/22.png,
-	share/advertising/ppp-03.png, share/advertising/dwd-03.pl,
-	share/advertising/28.pl, share/advertising/dis-02.png,
-	share/advertising/pwp-03.png, share/advertising/dwd-07.pl,
-	share/advertising/24.png, share/advertising/03.pl,
-	share/advertising/06.pl, share/advertising/ppp-07.pl,
-	share/advertising/13-a.pl, share/advertising/11.png,
-	share/advertising/ppp-04.png, share/advertising/pwp-10.pl,
-	share/advertising/ppp-10.png, share/advertising/18.png,
-	share/advertising/11.pl, share/advertising/15.pl,
-	share/advertising/21.pl, share/advertising/17.png,
-	share/advertising/05.png, share/advertising/dwd-01.png,
-	share/advertising/ppp-04.pl, share/advertising/pwp-01.pl,
-	share/advertising/ppp-02.png, share/advertising/pwp-08.pl,
-	share/advertising/08.png, share/advertising/dwd-09.pl: New ad's for 10.1
-
-2004/08/13  Olivier Blin <oblin at mandrakesoft.com>
-
-	* share/rpmsrate: add list of providers for modem connexions in INSTALL
-	section
-
-	* network/network.pm (write_interface_conf) do not write undefined MAC
-	address in iftab
-
-	* any.pm: add and use bootloader::set_append_netprofile() and
-	bootloader::get_append_netprofile()
-	remove old linuxconf profile code
-	(setupBootloader__entries) allow to choose net profile in advanced mode
-
-	* standalone/drakvpn: perl_checker fix (add missing spaces)
-	do not assume drakvpn is already configured if the tunnels file is
-	made of comments only
-
-	* ugtk2.pm: ctrl-alt-delete allows to restart install
-
-	* bootloader.pm: add and use bootloader::set_append_netprofile() and
-	bootloader::get_append_netprofile()
-	remove old linuxconf profile code
-	add remove_append_dict
-
-	* standalone/drakupdate_fstab: drakupdate_fstab: add debug mode that dumps
-	argv, device list and fstab
-	to make bug reports easier
-	(device_name_to_entry) remove unused $variable
-	(device_name_to_entry) if device looks like a devfs device, set
-	$e->{devfs_device} to $name even if the device wasn't found in devices
-	list (it helps in case the device has been removed in del mode)
-	(device_name_to_entry) remove useless assignment
-	(device_name_to_entry) in non devfs case, $e->{device} always equals
-	to $name, move this test in devfs case
-	(device_name_to_entry) don't do brain twisted things
-	($e->{prefix} || $e->{device}) equals $prefix
-	$prefix . $nb equals $name
-	(device_name_to_entry) fix indentation
-	(device_name_to_entry) define $nb locally
-	(device_name_to_entry) recompute $e->{device} only when needed
-	(device_name_to_entry) do devfs things where they should be done
-	(device_name_to_entry) define $e->{devfs_prefix} if entry looks looks
-	like a devfs one but isn't found in device list (else our computed
-	$e->{devfs_device} will be crappy)
-
-2004/08/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: changed arabic font to roya.ttf (from
-	fonts-ttf-arabic-farsi) which
-	also cover Farsi (fa).
-	updated Nimbus Sans L to cooker version, and edited it to add
-	the two missing letters needed to full latin and cyrillic coverage
-	(the two letters were latin schwa (for Azeri) and cyrillic che
-	with descender (for Tajik))
-
-2004/08/13  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: 
-	  - bootloader::remove_append_dict() is not useful,
-	bootloader::set_append() can do the same
-	  - don't modify anything before "Ok" is clicked
-	  - set_append with $netprofile eq '' will remove parameter PROFILE=xxx,
-	which is what we want
-
-	* install_steps.pm: 
-	  - don't use compssUsers anymore, use compssUsers.pl
-	  - code to display compssUsers choices is now in compssUsers.pl
-	  - {compssUsers} is now a list instead of a hash, and so drop
-	{compssUsersSorted}
-	  - rename {compssUsersChoice} to {rpmsrate_flags_chosen} (better name)
-	  - i18n_compssUsers is no more needed, add share/compssUsers.pl* to
-	ALLPMS
-	  - move installing acpi and acpid directly in any::setupBootloader()
-	instead of doing
-	it in summaryAfter(), that way acpi and acpid are installed in drakboot
-	(bugzilla #10760)
-	  - if no acpi parameter, don't try installing acpi & acpid (fix for
-	ppc)
-
-	* install_steps_gtk.pm: perl_checker compliance
-	  - don't use compssUsers anymore, use compssUsers.pl
-	  - code to display compssUsers choices is now in compssUsers.pl
-	  - {compssUsers} is now a list instead of a hash, and so drop
-	{compssUsersSorted}
-	  - rename {compssUsersChoice} to {rpmsrate_flags_chosen} (better name)
-	  - i18n_compssUsers is no more needed, add share/compssUsers.pl* to
-	ALLPMS
-
-	* share/compssUsers.pl, Makefile.config, share/compssUsers, pkgs.pm,
-	install2.pm, share/po/Makefile, share/po/i18n_compssUsers,
-	install_any.pm, Makefile, install_steps_interactive.pm: 
-	  - don't use compssUsers anymore, use compssUsers.pl
-	  - code to display compssUsers choices is now in compssUsers.pl
-	  - {compssUsers} is now a list instead of a hash, and so drop
-	{compssUsersSorted}
-	  - rename {compssUsersChoice} to {rpmsrate_flags_chosen} (better name)
-	  - i18n_compssUsers is no more needed, add share/compssUsers.pl* to
-	ALLPMS
-
-	* any.pm: perl_checker compliance
-	  - bootloader::remove_append_dict() is not useful,
-	bootloader::set_append() can do the same
-	  - don't modify anything before "Ok" is clicked
-	  - set_append with $netprofile eq '' will remove parameter PROFILE=xxx,
-	which is what we want
-	  - move installing acpi and acpid directly in any::setupBootloader()
-	instead of doing
-	it in summaryAfter(), that way acpi and acpid are installed in drakboot
-	(bugzilla #10760)
-	  - if no acpi parameter, don't try installing acpi & acpid (fix for
-	ppc)
-
-2004/08/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm: perl_checker fix
-	Concision, good (says perl_checker)
-	Try to copy associated synthesis when a custom hdlist path is given
-
-	* standalone.pm: Remove a perl compilation warning
-
-	* install_steps.pm, install_steps_interactive.pm: Don't ask for the
-	selection of supplementary media in non-interactive
-	installs.
-
-	* install_any.pm: One further step towards the ftp supplementary media
-	Don't ask for the selection of supplementary media in non-interactive
-	installs.
-
-2004/08/12  Funda Wang <fundawang at linux.net.cn>
-
-	* lang.pm: Hong Kong -> Hong Kong SAR
-
-2004/08/12  Olivier Blin <oblin at mandrakesoft.com>
-
-	* share/gen_locales.pl: revived, still needed since installer can't make
-	symlinks on read-only stage2, and we can't easily workaround it by
-	modifying LC_* variables
-
-	* network/netconnect.pm: kill unused variables
-	kill deprecated parts
-	set both NET_DEVICE and NET_INTERFACE in automatic lan configuration
-	(network install)
-	set NET_DEVICE and NET_INTERFACE for lan and adsl dhcp/manual
-	connections
-
-	* share/gen_locales.sh: still needed since installer can't make symlinks
-	on read-only stage2,
-	and we can't easily workaround it by modifying LC_* variables
-
-	* network/network.pm: write interface MAC address in iftab
-	errm, don't commit crappy gnome proxy handling for now
-	(write_interface_conf) simplify HWADDR assignment and define
-	$mac_address (will be used later for /etc/iftab)
-
-	* mdk-stage1/init.c: restart forked process if it exits with
-	exit_value_restart as return
-	code (thanks to Rafael for the choice of its value, 0x35 is the
-	translation of RS, abbreviation of ReStart, in his local l33t dialect,
-	and happens to be 53 in its decimal form, which is quite nice)
-	reorder else if blocks, it's useless to do two times the same test
-	(WEXITSTATUS(wait_status) == exit_value_proceed)
-	use a do while loop to wait for forked process
-
-2004/08/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: fixed tamil font (removed wrong unicode values for
-	some glyphs);
-	improved fonts.conf
-
-	* share/po/help-zh_CN.pot, share/po/bn.po, share/po/ms.po, share/po/sk.po,
-	share/po/gl.po, share/po/pt_BR.po, share/po/th.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/be.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/ltg.po, share/po/nb.po, share/po/ky.po,
-	share/po/uz.po, share/po/help-ru.pot, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/uk.po, share/po/help-de.pot, share/po/mn.po,
-	share/po/am.po, share/po/lt.po, share/po/cy.po, share/po/help-it.pot,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/hi.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/nl.po, share/po/help-fr.pot, share/po/tl.po,
-	share/po/de.po, share/po/help-es.pot, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* standalone/drakbug: fixed English string
-
-2004/08/12  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: enhance based on perl_checker suggestion, but not using it :)
-
-	* .perl_checker: standalone doesn't need to be blacklisted
-
-	* resize_fat/io.pm: remove check_mounted(), it is done by diskdrake
-
-	* share/po/help-zh_CN.pot, share/po/help-fr.pot, share/po/help-de.pot,
-	share/po/help-ru.pot, share/po/help-es.pot, share/po/help-it.pot: update
-	from doc (/cooker/doc/manualB)
-
-	* help.pm: fix bad %%
-	update from doc (/cooker/doc/manualB)
-
-	* share/po/help_xml2pm.pl: 
-	  - nicer error message for help.pm N parameters error
-	  - handle <sect3> (and also <option>)
-
-2004/08/12  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: First stab at supporting several hdlists on a
-	supplementary CD
-
-2004/08/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/nn.po: update (Karl Ove Hufthammer <karl@huftis.org>)
-
-	* standalone/drakbug: better let pango/Gtk+ do the proper wrapping that
-	let translator
-	manually insert end of lines which will badly look depending on
-	current theme and font settings
-
-	* standalone/net_monitor: let's be more l10n-friendly
-	fix default connection time (Fabrice FACORAT)
-
-	* tools/cvslog2changelog.pl: sync with soft/common/username
-
-	* standalone/draksec (basic_seclevel_explanations) explain
-	(basic_seclevel_explanations)
-	  - handle "bold" value for "weight"
-	  - display labels as bold
-
-	* share/po/br.po, share/po/fr.po: update
-
-	* share/rpmsrate: install driver and firmware for madwifi cards
-
-	* share/po/sv.po: typo fix (#10713, Robin Rosenberg
-	<robin.rosenberg@dewire.com>)
-	fix missing translations (#10711, Robin Rosenberg
-	<robin.rosenberg@dewire.com>)
-	big swedish update thanks to Robin Rosenberg
-	<robin.rosenberg@dewire.com>
-
-2004/08/12  Pixel  <pixel at mandrakesoft.com>
-
-	* .perl_checker: standalone doesn't need to be blacklisted
-
-	* resize_fat/io.pm: remove check_mounted(), it is done by diskdrake
-	perl_checker compliance
-
-	* security/msec.pm: use difference2() as suggested by new perl_checker
-	warning
-	cleanup
-	perl_checker compliance
-
-	* lang.pm: cleanup
-
-2004/08/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/sv.po: big swedish update thanks to Robin Rosenberg
-	<robin.rosenberg@dewire.com>
-
-	* share/rpmsrate: install driver and firmware for madwifi cards
-
-2004/08/11  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakhelp: 
-	  - perl_checker fixes
-	  - use webclient-kde instead of konqueror
-	  - add epiphany browser
-
-2004/08/11  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakroam: rewrite write_config for wlandetect to use output()
-	regexp cleanup (bis)
-	regexp cleanups
-	remove unused variable
-	use each_index
-	introduce and use isRoamingRunning to detect if the roaming daemon is
-	running (woah, sector clear, titi is gone home, no more cvs conflicts)
-	prepare for multiple roaming daemons support
-	run UpdateStatus after a timeout in case 'ps' output isn't updated
-	immediately
-	make titi enhancement actually work
-	use standalone
-	only one item can be selected in the known list
-	use a lower scan interval, as requested by Austin
-	use cat_, remove unneeded local $_, try to fix ConnectNow
-
-	* share/gen_locales.pl: unused since locale links are done by the
-	installer
-
-	* share/gen_locales.sh: do not run gen_locales.pl anymore
-	(locale links are done by the installer)
-
-	* lang.pm: main charset is now en_US.UTF-8
-
-	* standalone/drakbug: comment unused variable
-	update product list and fix case (bugzilla is case sensitive)
-	fix product, component and version for bugzilla
-	reorganize to use the same upload info message for Anthill and Bugzilla
-	fix bugzilla url
-
-2004/08/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: rewrite handling of defautl locale
-
-	* share/po/es.po: updated Spanish file
-	s/XFree/Xorg/
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: s/XFree/Xorg/
-
-2004/08/11  Pixel  <pixel at mandrakesoft.com>
-
-	* .perl_checker: new perl_checker fake those packages
-
-	* any.pm, standalone/harddrake2, interactive/stdio.pm, standalone.pm,
-	pkgs.pm, lang.pm, standalone/service_harddrake, install_steps.pm,
-	install_any.pm, ugtk2.pm: perl_checker compliance
-
-2004/08/11  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Support for ftp supplementary media
-	Restore ability to have supplementary http media.
-	Fix http installs.
-	Misleading comment
-
-2004/08/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10.1-0.8mdk
-
-	* bootloader.pm (mkinitrd) log failled command
-
-	* standalone/drakroam: perl_checker hints
-	typo fix
-	(Dialog) according to mandrake guidelines we should not use stock icon
-	(AddNet) help perl_checker in checking callers
-	(UpdateStatus) simplify
-	simplify through run_program::get_stdout()
-	expand parenthesises
-	(UpdateAvailable) probably better
-	(UpdateAvailable) localize variable
-	(Dialog) indent
-	(Dialog) enable checking call signature
-	(Dialog) simplify: reuse create_scrolled_window()
-	(Dialog) fix it (got broken on ugtk2 port)
-	perl_checker fixes
-
-	* Makefile.config: install drakroam
-
-	* standalone.pm: perl_checker cleanups
-
-	* share/rpmsrate: install firmware for centrino if needed
-
-	* .perl_checker: blacklist Gtk2::SimpleList for drakroam
-
-2004/08/10  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: update
-
-2004/08/10  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: remove unused variable in network::netconnect,
-	thanks perl_checker
-	add some FIXME comments in network::netconnect
-	network::tools::connect_prog shouldn't be used/written anymore now
-	kill some more connect/disconnect_file
-
-	* standalone/drakroam: perl_checker compliance
-	ugtk2 port
-	fix roaming detection
-	initial import of wlandetect version, from Austin Action
-
-	* standalone/drakconnect: network::tools::connect_prog is really dead now
-
-2004/08/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/locales-skeleton.tar.bz2: updated use UTF-8 locales for everything
-
-	* share/gen_locales.pl, share/gen_locales.sh: using "en_US.UTF-8" instead
-	of "UTF-8" as model
-	updated use UTF-8 locales for everything
-
-2004/08/10  Pixel  <pixel at mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2, rescue/make_rescue_img: umount mount point
-	instead of umounting the loopback file
-	(works better when /etc/mtab is /proc/mounts)
-
-	* share/rpmsrate: don't install devfsd by default, use udev instead
-
-	* Xconfig/various.pm, Xconfig/card.pm: s/XFree/Xorg/
-
-	* any.pm: create /etc/udev/conf.d/xxx.conf
-
-	* diskdrake/interactive.pm: no {fs_type} doesn't mean the type invalid
-	no {pt_type} doesn't mean Empty
-
-	* network/adsl.pm, pkgs.pm, install2.pm, bootloader.pm: mount /proc, /sys
-	and /proc/usb/usb in $prefix ASAP instead of doing it at various places
-
-	* fs/type.pm: when there is no {pt_type}, favour the one fs_type2pt_type
-	favours
-
-	* raid.pm: remove dead code
-
-2004/08/10  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/08/10  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: URLPREFIX is not set if the main media isn't
-	http, so the prefix must be
-	passed manually.
-
-2004/08/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/net_monitor: add a horizontal separator in stats to prevent
-	visual disguts between
-	supposed non aligned labels
-	fix looking aka vertical alignment of labels (Fabrice FACORAT
-	<f.faber-pro@ifrance.com>, #10300)
-	fix packing (Fabrice FACORAT <f.faber-pro@ifrance.com>, #10300)
-
-	* tools/cvslog2changelog.pl: list a few more contributors
-
-	* share/rpmsrate: add s2u so that hostname changes do not fsck the desktop
-	install udev by default
-
-	* standalone/drakroam (AddNet, WriteConfig) do not bother accessing arrays
-	like in C
-	perl_checker cleanups (GUI code actually wasn't touched in order to
-	help olivier merge his ugtk2 porting work)
-
-2004/08/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: updated fonts (added devanagari and tamil)
-
-2004/08/10  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: more logs
-
-	* network/adsl.pm: mounting device "none" is cleaner
-
-	* share/rpmsrate: don't install devfsd by default, use udev instead
-
-	* modules/modprobe_conf.pm, modules/modules_conf.pm: perl_checker
-	compliance
-	internally keep module names according to what we configure (and our
-	kernel, 2.4 or 2.6)
-
-	* modules.pm, modules/any_conf.pm: internally keep module names according
-	to what we configure (and our kernel, 2.4 or 2.6)
-
-	* Xconfig/various.pm, Xconfig/card.pm: s/XFree/Xorg/
-
-2004/08/10  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: install_urpmi(): set up the right with_hdlist for
-	urpmi.cfg
-	Back to first medium after having added a supplementary one.
-	Set prefix for http supplementary media, since $URLPREFIX is not
-	defined.
-
-	* crypto.pm: Adapt to the new mirror structure: RPMs are no longer in a
-	RPMS subdirectory
-
-2004/08/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: install udev by default
-
-2004/08/09  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/08/09  fwang
-
-	* share/advertising/dis-11.pl, share/advertising/pwp-10.pl,
-	share/advertising/dwd-08.pl, share/advertising/ppp-11.pl:
-	s/MandrakeExpert/Mandrakeexpert
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/08/09  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 556
-	The Mandrakelinux
-
-2004/08/09  jjorge
-
-	* share/po/pt.po: saraiva corrected
-	saraiva
-
-2004/08/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: in netconnect::(start|stop)_internet, use
-	(connect|disconnect)_backend
-
-	* install_any.pm: use new ISO images volume name (#10543)
-	fix regexp (do not strip paths ending in .*iso)
-
-	* mdk-stage1/directory.c: typo fix (from Olivier Borowski)
-
-2004/08/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-	updated pot file
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ltg.po, share/po/nb.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* share/fonts.tar.bz2: replaced arabic and bengali fonts
-
-	* share/po/ar.po: updated Arabic file
-	updated pot file
-
-	* share/po/bn.po: updated Bengali file
-	updated pot file
-
-2004/08/09  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/http.pm: use $F instead of *F
-	prototype perl_checker compliance
-
-	* network/network.pm: perl_checker prototype compliance
-	perl_checker compliance + cleanup
-
-	* ugtk2.pm, standalone/drakxtv, standalone/localedrake: we never pass a
-	prefix to lang::read() which is always use in standalone,
-	so use $::prefix and don't pass a prefix anymore
-
-	* any.pm: 
-	  - move the "Input method:" at the end (titi did put it in the middle
-	for OptionMenu which is crap)
-	  - need updating the "changed" callback since there is a new entry
-
-	* share/rpmsrate: remove awesfx from "SYSTEM 2" otherwise it gives a fatal
-	error
-
-	* diskdrake/interactive.pm: help perl_checker know the $all_hds *is* used
-
-	* install_steps_auto_install.pm, install2.pm: correctly call errorInStep()
-
-	* fsedit.pm: flags is optional
-
-	* lang.pm: prototype compliance with perl_checker
-	we never pass a prefix to lang::read() which is always use in
-	standalone,
-	so use $::prefix and don't pass a prefix anymore
-
-	* Xconfig/various.pm: 
-	  - adapt prototype of runlevel() to its use
-	  - bootloader::read() needs fstab
-
-	* install_steps.pm: correctly call errorInStep()
-	fix call to bootloader::read()
-
-	* install_any.pm: fix typo
-	  - fix unlockCdrom()
-	  - ejectCdrom() prototype compliance with perl_checker
-
-	* fs.pm: allow 192.168.1.1:/export
-
-2004/08/09  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Select supplementary medium
-	Begin the support for installations over multiple media.
-
-	* share/po/pt.po: Remove conflict marker and duplicate entries
-
-2004/08/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakperm: prefer obj->new rather than new obj for gtk+
-	widgets
-	  - perl_checker cleanups
-	  - reuse cat_() where opencoded
-
-	* share/po/fr.po: update
-	update
-
-	* standalone/logdrake, standalone/drakfloppy,
-	Xconfig/resolution_and_depth.pm, standalone/drakconnect,
-	standalone/drakbug, standalone/drakTermServ, standalone/net_monitor:
-	prefer obj->new rather than new obj for gtk+ widgets
-
-	* ugtk2.pm (gtkappend_page) title is optonnal and perl_checker is loudly
-	complaining outdoor...
-
-	* standalone/drakautoinst: prefer obj->new rather than new obj for gtk+
-	widgets
-	perl_checker cleanup
-
-	* standalone/net_applet: developers should always run their stuff with the
-	strict pragma
-	prefer obj->new rather than new obj for gtk+ widgets
-	(checkNetwork) do not die when gateway canot be guessed (Joe Bolin
-	<sopwithcamel@charter.net>)
-	else the applet dies never to be heard from again until the next login
-	b/c with DHCP connections, the gateway information is lost when the
-	network is manually brought down.
-	Indeed gateway is not needed for direct connection through crossover
-	cable.
-	(setState) fix status toolip
-	allow multiple instances, but only one per user (Joe Bolin
-	<sopwithcamel@charter.net>)
-
-	* standalone/draksec (basic_seclevel_explanation) handle any tags ala
-	label
-	add hint about ala LaTeX strings for translators
-	prefer obj->new rather than new obj for gtk+ widgets
-
-	* standalone/drakbackup: prefer obj->new rather than new obj for gtk+
-	widgets
-	(find_files_to_restore) cleanups
-
-	* harddrake/sound.pm, install_messages.pm, standalone/drakfont,
-	standalone/draksound, install_interactive.pm, install_any.pm,
-	standalone/drakxtv: add hint about ala LaTeX strings for translators
-
-	* share/po/br.po: update
-
-	* drakxtools.spec: 10.1-0.7mdk
-
-2004/08/09  yrahal
-
-	* share/po/ar.po: Arabic (from Arabeyes.org) translation
-	Arabic translation
-
-2004/08/08  fwang
-
-	* network/netconnect.pm: s/iwpconfig/iwconfig
-
-	* share/advertising/dwd-04.pl, share/advertising/ppp-09.pl,
-	share/advertising/dis-08.pl, share/advertising/dis-10.pl,
-	share/advertising/ppp-05.pl, share/advertising/ppp-08.pl,
-	share/advertising/ppp-10.pl, share/advertising/dwd-06.pl,
-	share/advertising/dis-09.pl, share/advertising/ppp-04.pl,
-	share/advertising/pwp-04.pl, share/advertising/pwp-08.pl,
-	share/advertising/dwd-07.pl, share/advertising/pwp-07.pl,
-	share/advertising/pwp-09.pl: Some string fixes
-
-	* standalone/logdrake: typo fix
-	s/Mandrake/Mandrakelinux
-
-	* authentication.pm, share/po/zh_CN.po: typo fix
-
-	* lang.pm: Revised comments to make non-utf-8 editor happier
-	changed default font for gb2312
-
-	* standalone/drakconnect, standalone/drakbug, standalone/harddrake2,
-	standalone.pm, standalone/net_monitor: s/Mandrake/Mandrakelinux
-
-2004/08/08  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 401
-	Volume label:
-
-2004/08/08  Pixel  <pixel at mandrakesoft.com>
-
-	* share/aliases: remove raidstop
-
-	* diskdrake/hd_gtk.pm, share/list.i386, diskdrake/interactive.pm,
-	fs/get.pm, install2.pm, fsedit.pm, detect_devices.pm, raid.pm,
-	bootloader.pm, install_any.pm: 
-	  - switch to mdadm (instead of raidtools)
-	  - create mdadm.conf instead of raidtab
-	  - internal {raids} is no more indexed by X for mdX, and so don't have
-	holes anymore
-	  - internal {chunk-size} is now a number in KiB
-	  - internal {raid} is the raid device name, not the number
-	  - various cleanup for raid detection
-
-	* install_steps.pm: don't set toFormat if we don't have a {fs_type} (eg:
-	pt_type 0xfd, ie raw raid)
-
-	* share/rpmsrate: many authentication packages where missing (bugzilla
-	#10644)
-	many authentication packages where missing (bugzilla #10644)
-
-2004/08/08  tsdgeos
-
-	* share/po/ca.po: small updates to catalan translation
-
-2004/08/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakperm (row_setting_dialog) add hints for translators
-	(row_setting_dialog) enable translators to print a fully translated
-	strings
-	(though we should probably just pregenerate and fill pos with all the
-	strings
-	b/c of inflections and mutations that occur in some languages)
-	(row_setting_dialog) do not set hash as string on labels else perl will
-	stringify this very hash thus making draksec crashes with strict pragma
-	simplify code through Gtk2::ComboBox->new_with_strings()
-
-	* standalone/drakTermServ, standalone/drakbackup, standalone/draksec,
-	standalone/drakfloppy: simplify code through
-	Gtk2::ComboBox->new_with_strings()
-
-	* drakxtools.spec: fix 10.1-0.6mdk's changelog
-
-	* standalone/drakboot: sort theme list
-	simplify code through Gtk2::ComboBox->new_with_strings()
-	sort WMs list
-	use proper widget (aka GtkTable)
-	sort user list
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: merge in typo fixes
-
-	* ugtk2.pm (Gtk2::ComboBox->new_with_strings) make it working
-
-2004/08/08  yrahal
-
-	* share/po/ar.po: Arabic translation
-
-2004/08/08  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 205
-	Local file:
-
-2004/08/08  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: don't set toFormat if we don't have a {fs_type} (eg:
-	pt_type 0xfd, ie raw raid)
-
-	* detect_devices.pm: 
-	  - switch to mdadm (instead of raidtools)
-	  - create mdadm.conf instead of raidtab
-	  - internal {raids} is no more indexed by X for mdX, and so don't have
-	holes anymore
-	  - internal {chunk-size} is now a number in KiB
-	  - internal {raid} is the raid device name, not the number
-	  - various cleanup for raid detection
-	only load floppy module explictly during install (otherwise it causes
-	ugly messages in bootloader-config)
-
-	* any.pm: replace "More" with a more descriptive button name
-
-	* share/rpmsrate: many authentication packages where missing (bugzilla
-	#10644)
-	many authentication packages where missing (bugzilla #10644)
-
-	* diskdrake/hd_gtk.pm, share/list.i386, diskdrake/interactive.pm,
-	fs/get.pm, install2.pm, fsedit.pm, raid.pm, bootloader.pm,
-	install_any.pm: 
-	  - switch to mdadm (instead of raidtools)
-	  - create mdadm.conf instead of raidtab
-	  - internal {raids} is no more indexed by X for mdX, and so don't have
-	holes anymore
-	  - internal {chunk-size} is now a number in KiB
-	  - internal {raid} is the raid device name, not the number
-	  - various cleanup for raid detection
-
-2004/08/07  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 130
-
-2004/08/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-	* share/po/wa.po: updated Walloon file
-
-2004/08/07  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/08/06  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 100
-	What norm is your...
-
-2004/08/06  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm (network::adsl::adsl_conf_backend) add ppp_async alias
-	for sagem
-	devices (so that they work during install)
-	fix titypo
-	try to load all modules that may be needed to establish connexion
-	try to mount proc fs too, in case it wasn't done earlier
-
-	* network/netconnect.pm: use the new kdenetwork-kppp-provider package
-	(thanks Laurent !) to be
-	able to parse the provider db without requiring kdenetwork-kppp
-
-2004/08/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/de.po: updated German file
-	updated pot file
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/ky.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/fur.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/tl.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* fsedit.pm: reverted an unneeded string change
-
-2004/08/06  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: fix typo
-	don't try to remove non existing should_be_dirs
-
-2004/08/06  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/rpmsrate: If totem is to be avoided for KDE, avoid it in audio as
-	well as in video.
-
-	* pkgs.pm: Allow multiple complicate flags in rpmsrate, if they're exactly
-	the same.
-
-2004/08/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-	push typo fixes in order to reduce pressure on translators
-
-	* drakxtools.spec: 10.1-0.6mdk
-	10.1-0.5mdk
-
-	* any.pm (selectCountry) fix IM sorting
-
-	* share/rpmsrate: 
-	  - install awesfx too if neded
-	  - add a note b/c we cannot install it :-)
-	always install all arabic fonts since farsi oness contains nice arabic
-	glyphs but not urdu (by way of arabayes feedback)
-
-	* network/adsl.pm (adsl_conf_backend) let's have a better looking mesage
-	(adsl_conf_backend) only try to mount /proc if it wasn't (eg if we
-	didn't intall any packages)
-
-	* lang.pm: fix x-unikey support (Larry Nguyen)
-	(write) fix configuring IM
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/mn.po, share/po/am.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/fur.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/nl.po, share/po/tl.po, share/po/de.po, share/po/eo.po,
-	share/po/el.po, share/po/bg.po, share/po/cs.po, share/po/uz@Latn.po:
-	push typo fixes in order to reduce pressure on translators
-
-	* ugtk2.pm (Gtk2::ComboBox->set_text) better error message
-	(create_scrolled_window) adding 6px as left margin for TextView in
-	scrolled Window
-
-	* standalone/drakbackup: typo fix
-	cleanups for lord perl_checker
-	(advanced_when) quiet runtime warnings
-	(advanced_when) fix crash when selecting an entry in pull down menus
-
-2004/08/06  yrahal
-
-	* share/po/ar.po: Arabeyes' Arabic translation
-
-2004/08/05  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Update
-	Update for discovery
-
-2004/08/05  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakclock: if ntp is used, get the new time before updating
-	the hwclock
-	(fix from Emmanuel Blindauer, #10537)
-
-	* mdk-stage1/directory.c: do not go back to the beginning if no
-	distribution is found in the
-	directory (second fix)
-	do not go back to the beginning if no distribution is found in the
-	directory
-
-	* network/adsl.pm: try to mount usbdevfs in $::prefix before attempting to
-	run adsl start
-	programs
-
-	* network/netconnect.pm: set netcnx type when an external isdn modem is
-	selected, or else
-	modem::ppp_read_conf will crash (Anthill #1033)
-	set netcnx type when an external isdn modem is selected, or else
-	modem::ppp_read_conf will crash (Anthill #1033)
-
-2004/08/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uk.po, share/po/et.po: updated Estonian file
-
-2004/08/05  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/various.pm, diskdrake/interactive.pm,
-	standalone/bootloader-config: adapt to bootloader functions now using
-	all_hds instead of hds
-
-	* bootloader.pm: update yaboot code (based on Christiaan Welvaart patch)
-	/usr/sbin/ofpath seems to need /mnt/sys mounted, and the device must
-	exist (Christiaan Welvaart)
-	fix typos (Christiaan Welvaart)
-
-	* install_steps_interactive.pm: basic code for upgrading from a redhat
-	distribution
-
-	* install_steps_gtk.pm: drop Xpmac support
-
-	* detect_devices.pm: isLaptop() special code for ppc
-
-	* any.pm, install_steps.pm: basic code for upgrading from a redhat
-	distribution
-	adapt to bootloader functions now using all_hds instead of hds
-
-	* install_any.pm: basic code for upgrading from a redhat distribution
-	write auto_inst.cfg after making room on the floppy image
-	make room on replay/auto_install floppy image before doing anything
-	when replaying, overwrite boot.msg with an empty message to win some
-	space
-	(it was only done in non-replay mode)
-	adapt to bootloader functions now using all_hds instead of hds
-	make room on replay/auto_install floppy image before doing anything
-
-2004/08/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm: make it clearer by factorizing arch() call
-	fix PPC entries
-
-	* install_messages.pm (install_completed) bump errata page (though it does
-	not yet exists)
-
-	* share/rpmsrate: use new arabic font packages
-	install sg usefull when there's a bluetooth device connected to the
-	system
-	install gimp's help along it
-
-2004/08/05  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakclock: if ntp is used, get the new time before updating
-	the hwclock
-	(fix from Emmanuel Blindauer, #10537)
-
-2004/08/05  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm, standalone/bootloader-config: adapt to
-	bootloader functions now using all_hds instead of hds
-
-	* install_steps.pm: adapt to bootloader functions now using all_hds
-	instead of hds
-	pass around $all_hds instead of $hds
-
-	* harddrake/sound.pm: add dmasound_pmac <=> snd-powermac (for ppc,
-	Christiaan Welvaart)
-
-	* keyboard.pm: ppc doesn't use dumpkeys (?) (Christiaan Welvaart)
-
-	* install_steps_gtk.pm: drop Xpmac support
-
-	* detect_devices.pm: isLaptop() special code for ppc
-
-	* bootloader.pm: update yaboot code (based on Christiaan Welvaart patch)
-	/usr/sbin/ofpath seems to need /mnt/sys mounted, and the device must
-	exist (Christiaan Welvaart)
-	fix typos (Christiaan Welvaart)
-	pass around $all_hds instead of $hds
-	create bootloader::allowed_boot_parts() and use it,
-	it allows installing on md0 if using lilo and md0 is raid1
-
-	* Xconfig/various.pm: adapt to bootloader functions now using all_hds
-	instead of hds
-	replaced XFree86 and XFree with Xorg (bugzilla #10531)
-
-	* any.pm: adapt to bootloader functions now using all_hds instead of hds
-	create bootloader::allowed_boot_parts() and use it,
-	it allows installing on md0 if using lilo and md0 is raid1
-
-	* rescue/list.ppc, tools/ppc/mkINSTALLCD, share/list.ppc: update
-	(Christiaan Welvaart)
-
-	* fs/type.pm: "PPC PReP Boot" is an "important" type on ppc
-
-	* Xconfig/card.pm, services.pm, standalone/XFdrake: replaced XFree86 and
-	XFree with Xorg (bugzilla #10531)
-
-	* share/list, share/list.x86_64, share/list.i386: ntfsresize and dmidecode
-	are not needed on ppc (Christiaan Welvaart)
-
-	* install_any.pm: make room on replay/auto_install floppy image before
-	doing anything
-	when replaying, overwrite boot.msg with an empty message to win some
-	space
-	(it was only done in non-replay mode)
-	adapt to bootloader functions now using all_hds instead of hds
-	fix backward compatibility {type} field in partitions and manualFstab
-
-2004/08/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/draksec: looks like patch -l did wrong things :-(
-
-	* network/adsl.pm: quiet perl_checker
-	(adsl_conf_backend) fix error message
-
-	* share/rpmsrate: install needed alsa tools depending on present sound
-	cards
-
-	* harddrake/sound.pm: make it clearer by factorizing arch() call
-	fix PPC entries
-	add support for ALSA on PPC and SPARC
-	align sound driver entries
-	update sound drivers list
-
-2004/08/04  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* share/net_applet.xinit: 
-	  - added net_applet xinit file to automate launch of net_applet in KDE,
-	GNOME and IceWM
-
-	* drakxtools.spec: 
-	  - do not expand shell vars
-	  - do not forget to package xinit.d net_applet file
-	  - automatically launch net_applet for KDE, GNOME and IceWM
-
-2004/08/04  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/isdn.pm: do not write cnx_script anymore (isdn4linux service
-	will modprobe the
-	driver, ibod service is started at boot, ifup/ifdown handle the dial)
-
-	* mdk-stage1/directory.c: prefer to use a ramdisk for disk installs
-
-	* network/tools.pm, network/ethernet.pm, standalone/drakconnect: kill
-	set_cnx_script usage, replace cnx_scripts with ifup/ifdown
-
-	* network/adsl.pm: catch die from modules::load
-	add modules arrays and use modules::load to be able to load modules
-	from modules.cz files, load these modules when not in standalone mode
-	(they're needed for install and Move)
-
-	* network/netconnect.pm: fix wording
-	do not force kppp installation, it will be installed by
-	modem::ppp_configure if kdebase is installed,
-	else ifup/ifdown scripts are enough
-	kill set_cnx_script usage, replace cnx_scripts with ifup/ifdown
-	write a cnx_script for adsl connexions too (so that drakconnect can
-	establish the connexion), add a FIXME comment to remind it is bad
-
-2004/08/04  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/get.pm, fs/mount_options.pm: return a true value for perl
-
-	* standalone/bootloader-config: don't allow unknown kernel names to mess
-	everything
-
-	* bootloader.pm: 
-	  - same_entries() doesn't look anymore at kernel options
-	(it tends to create stupid alt_xxx entries)
-	  - fix creation of labels alt2_alt_xxx (will now be alt2_xxx)
-	  - don't create bad "linux-nonfb" for kernel-win4lin
-	try to keep the order of kernel options (to help same_entries())
-	handle win4lin kernels
-
-	* any.pm: .gnome2/wmrc and .wmrc are obsolete, it is now .dmrc
-	(nb: beware, one must write 07IceWM instead of IceWM, same for others)
-	don't set /etc/sysconfig/desktop anymore, configure ~/.wmrc,
-	~/.gnome2/gdm and ~/.desktop instead
-
-	* rescue/list: replace /sbin/mkraid with /sbin/mdadm (as told on cooker by
-	Luca Berra)
-
-2004/08/04  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* http.pm: Verify that regexp matched
-
-2004/08/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* Makefile.drakxtools: fix build
-
-	* ugtk2.pm (Gtk2::ComboBox->set_text) actually print a warning if we
-	failled
-	let's system wide config not override user's locale
-
-	* lang.pm: add x-unikey support for Vietnamese
-	switch korean to scim-hangul IM
-	(write) if one override default IM, remove any setting from default IM
-	(hint:
-	some IM configurations do not have all fields set...)
-	(read) fix IM reading
-
-	* share/rpmsrate: add x-unikey support for Vietnamese
-	include fcitx IM too
-	ensure alternative IMs get in in the isos
-	switch korean to scim-hangul IM
-	uim is already installed if needed depending on locale
-	install xvnkb IM for vietnamese
-	install ami IM only for korean
-
-	* network/adsl.pm: log module loading faillure
-
-	* drakxtools.spec: 10.1-0.4mdk
-	update 10.1-0.3mdk'log (thx to build issue...)
-	10.1-0.3mdk
-
-	* Makefile: fix build
-	remove unused net_applet.desktop
-
-	* interactive/gtk.pm (ask_fromW) actually honor default value
-
-	* standalone/draksec: perl_checker cleanup
-	  - upcase fields values (and btw reduce the number of strings to
-	translate :-))
-	  - simplify translating
-
-2004/08/03  jjorge
-
-	* share/po/pt.po: error?
-
-2004/08/03  Olivier Blin <oblin at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: add missing fonts.conf (with Kacst-Qr entries)
-
-2004/08/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: oops, /etc/fonts.conf missing from tarball
-	updted fonts-cache file
-
-2004/08/03  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: move mount options related stuff from
-	fs.pm to newly created fs/mount_options.pm
-	  - fs::set_all_default_options() ->
-	fs::mount_options::set_all_default()
-	  - fs::mount_options_pack() -> fs::mount_options::pack()
-	  - fs::mount_options_unpack() -> fs::mount_options::unpack()
-	  - fs::rationalize_options() -> fs::mount_options::rationalize()
-	  - fs::set_default_options() -> fs::mount_options::set_default()
-	  - fs::mount_options() -> fs::mount_options::list()
-	  - fs::mount_options_help() -> fs::mount_options::help()
-	many functions in fsedit don't modify anything, they are simply
-	accessors.
-	create fs::get and move them into it
-	  - device2part(), up_mount_point() moved from fs to fs::get
-	  - part2hd(), file2part(), has_mntpoint(), mntpoint2part(),
-	empty_all_hds() moved from fsedit to fs::get
-	  - fsedit::get_root() -> fs::get::root()
-	  - fsedit::get_root_() -> fs::get::root_()
-	  - fsedit::get_really_all_fstab() -> fs::get::really_all_fstab()
-	  - fsedit::get_all_fstab_and_holes() -> fs::get::fstab_and_holes()
-	  - fsedit::get_all_fstab() -> fs::get::fstab()
-	  - fsedit::get_all_holes() -> fs::get::holes()
-	  - fsedit::all_free_space -> fs::get::free_space()
-	  - fsedit::get_really_all_fstab() -> fs::get::really_all_fstab()
-	
-	  - fsedit::get_fstab_and_holes() -> fs::get::hds_fstab_and_holes()
-	  - fsedit::get_holes() -> fs::get::hds_holes()
-	  - fsedit::get_fstab() -> fs::get::hds_fstab()
-	  - fsedit::free_space() -> fs::get::hds_free_space()
-	
-	  - fsedit::get_visible_fstab() unused, removed
-	authentication::kind2description() has changed and its name is
-	missleading :-(
-	keeping it for now and adapt install_steps_interactive::setRootPassword
-	along what's done in drakauth
-	authentication::kind2description() has changed and its name is
-	missleading :-(
-	keeping it for now and adapt install_steps_interactive::setRootPassword
-	along what's done in drakauth
-
-	* fs/format.pm: add CVS $Id:
-	many functions in fsedit don't modify anything, they are simply
-	accessors.
-	create fs::get and move them into it
-	  - device2part(), up_mount_point() moved from fs to fs::get
-	  - part2hd(), file2part(), has_mntpoint(), mntpoint2part(),
-	empty_all_hds() moved from fsedit to fs::get
-	  - fsedit::get_root() -> fs::get::root()
-	  - fsedit::get_root_() -> fs::get::root_()
-	  - fsedit::get_really_all_fstab() -> fs::get::really_all_fstab()
-	  - fsedit::get_all_fstab_and_holes() -> fs::get::fstab_and_holes()
-	  - fsedit::get_all_fstab() -> fs::get::fstab()
-	  - fsedit::get_all_holes() -> fs::get::holes()
-	  - fsedit::all_free_space -> fs::get::free_space()
-	  - fsedit::get_really_all_fstab() -> fs::get::really_all_fstab()
-	
-	  - fsedit::get_fstab_and_holes() -> fs::get::hds_fstab_and_holes()
-	  - fsedit::get_holes() -> fs::get::hds_holes()
-	  - fsedit::get_fstab() -> fs::get::hds_fstab()
-	  - fsedit::free_space() -> fs::get::hds_free_space()
-	
-	  - fsedit::get_visible_fstab() unused, removed
-
-	* fs/mount_options.pm, network/smbnfs.pm, network/smb.pm: move mount
-	options related stuff from fs.pm to newly created fs/mount_options.pm
-	  - fs::set_all_default_options() ->
-	fs::mount_options::set_all_default()
-	  - fs::mount_options_pack() -> fs::mount_options::pack()
-	  - fs::mount_options_unpack() -> fs::mount_options::unpack()
-	  - fs::rationalize_options() -> fs::mount_options::rationalize()
-	  - fs::set_default_options() -> fs::mount_options::set_default()
-	  - fs::mount_options() -> fs::mount_options::list()
-	  - fs::mount_options_help() -> fs::mount_options::help()
-
-	* tools/hd_grub.cgi: better description
-
-	* diskdrake/interactive.pm, install_steps.pm, fs.pm, fsedit.pm,
-	standalone/diskdrake, standalone/drakupdate_fstab: move mount options
-	related stuff from fs.pm to newly created fs/mount_options.pm
-	  - fs::set_all_default_options() ->
-	fs::mount_options::set_all_default()
-	  - fs::mount_options_pack() -> fs::mount_options::pack()
-	  - fs::mount_options_unpack() -> fs::mount_options::unpack()
-	  - fs::rationalize_options() -> fs::mount_options::rationalize()
-	  - fs::set_default_options() -> fs::mount_options::set_default()
-	  - fs::mount_options() -> fs::mount_options::list()
-	  - fs::mount_options_help() -> fs::mount_options::help()
-	many functions in fsedit don't modify anything, they are simply
-	accessors.
-	create fs::get and move them into it
-	  - device2part(), up_mount_point() moved from fs to fs::get
-	  - part2hd(), file2part(), has_mntpoint(), mntpoint2part(),
-	empty_all_hds() moved from fsedit to fs::get
-	  - fsedit::get_root() -> fs::get::root()
-	  - fsedit::get_root_() -> fs::get::root_()
-	  - fsedit::get_really_all_fstab() -> fs::get::really_all_fstab()
-	  - fsedit::get_all_fstab_and_holes() -> fs::get::fstab_and_holes()
-	  - fsedit::get_all_fstab() -> fs::get::fstab()
-	  - fsedit::get_all_holes() -> fs::get::holes()
-	  - fsedit::all_free_space -> fs::get::free_space()
-	  - fsedit::get_really_all_fstab() -> fs::get::really_all_fstab()
-	
-	  - fsedit::get_fstab_and_holes() -> fs::get::hds_fstab_and_holes()
-	  - fsedit::get_holes() -> fs::get::hds_holes()
-	  - fsedit::get_fstab() -> fs::get::hds_fstab()
-	  - fsedit::free_space() -> fs::get::hds_free_space()
-	
-	  - fsedit::get_visible_fstab() unused, removed
-
-	* loopback.pm, any.pm, fs/get.pm, diskdrake/removable.pm, bootloader.pm,
-	network/netconnect.pm, diskdrake/dav.pm, diskdrake/hd_gtk.pm,
-	standalone/drakboot, lvm.pm, install2.pm, network/tools.pm,
-	diskdrake/smbnfs_gtk.pm, install_interactive.pm, install_any.pm,
-	standalone/bootloader-config, partition_table.pm: many functions in
-	fsedit don't modify anything, they are simply accessors.
-	create fs::get and move them into it
-	  - device2part(), up_mount_point() moved from fs to fs::get
-	  - part2hd(), file2part(), has_mntpoint(), mntpoint2part(),
-	empty_all_hds() moved from fsedit to fs::get
-	  - fsedit::get_root() -> fs::get::root()
-	  - fsedit::get_root_() -> fs::get::root_()
-	  - fsedit::get_really_all_fstab() -> fs::get::really_all_fstab()
-	  - fsedit::get_all_fstab_and_holes() -> fs::get::fstab_and_holes()
-	  - fsedit::get_all_fstab() -> fs::get::fstab()
-	  - fsedit::get_all_holes() -> fs::get::holes()
-	  - fsedit::all_free_space -> fs::get::free_space()
-	  - fsedit::get_really_all_fstab() -> fs::get::really_all_fstab()
-	
-	  - fsedit::get_fstab_and_holes() -> fs::get::hds_fstab_and_holes()
-	  - fsedit::get_holes() -> fs::get::hds_holes()
-	  - fsedit::get_fstab() -> fs::get::hds_fstab()
-	  - fsedit::free_space() -> fs::get::hds_free_space()
-	
-	  - fsedit::get_visible_fstab() unused, removed
-
-2004/08/03  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: A small variable renaming: use $medium for
-	hashes and $medium_name for strings
-
-	* share/po/fr.po: Small typos
-
-	* share/po/pt.po: pt.po was corrupted
-
-2004/08/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/draksplash2: help perl_checker
-
-	* ugtk2.pm (create_dialog) only add space between icon and text if there's
-	actually an icon
-	(create_notebook) reuse gtkappend_page()
-	(create_dialog) do not show separator by default
-	(_create_dialog) sanitize dialogs/popups:
-	  - set a border around it
-	  - add more space between the icon and the text
-	(gtkappend_page) name parameters, enabling perl_checker to check
-	callers' call
-	signature
-	(create_packtable) set a border around packtables
-
-	* standalone/draksec: reuse gtkappend_page()
-
-	* standalone/drakups (add_device_wizard) fix string (Joe Brower)
-
-2004/08/03  Olivier Blin <oblin at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: add missing fonts.conf (with Kacst-Qr entries)
-
-2004/08/03  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: authentication::kind2description() has
-	changed and its name is missleading :-(
-	keeping it for now and adapt install_steps_interactive::setRootPassword
-	along what's done in drakauth
-	authentication::kind2description() has changed and its name is
-	missleading :-(
-	keeping it for now and adapt install_steps_interactive::setRootPassword
-	along what's done in drakauth
-
-2004/08/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakups (add_device_wizard) fix string (Joe Brower)
-
-2004/08/02  Olivier Blin <oblin at mandrakesoft.com>
-
-	* Makefile: enable ar and fa locales since an arabic font is now available
-	in install
-
-2004/08/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: added arabic and bengali fonts
-
-2004/08/02  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/format.pm: make perl_checker happy
-
-2004/08/02  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: in sagem start section, modprobe eagle-usb and do not
-	wait for sync
-	here, fctStartAdsl will handle that when pppd is called
-	in speedtouch start section, modprobe speedtch module and use
-	speedtouch-start instead of directly using modem_run
-	in install, run modem start scripts once config is written
-
-	* Makefile: enable ar and fa locales since an arabic font is now available
-	in install
-
-2004/08/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: added arabic and bengali fonts
-
-2004/08/02  Pixel  <pixel at mandrakesoft.com>
-
-	* .perl_checker: black list URPM::Build
-
-	* fs.pm: don't use supermount for {is_removable} devices when used for a
-	boot time partition (like /usr and /)
-
-	* share/rpmsrate: flag rosegarden4 KDE
-
-	* any.pm, network/network.pm, harddrake/sound.pm, diskdrake/dav.pm,
-	network/netconnect.pm, network/smb.pm, do_pkgs.pm, lvm.pm,
-	network/drakfirewall.pm, network/nfs.pm, standalone/drakups,
-	standalone/drakxtv: introduce ->ensure_binary_is_installed and use it
-
-	* fs/format.pm, install_any.pm: 
-	  - move package_needed_for_partition_type() from fsedit to fs::format
-	  - create check_package_is_installed() in fs::format and use it
-
-	* diskdrake/interactive.pm: fsedit::check_fs_type() is now
-	fs::type::check()
-	use fs::format::check_package_is_installed() before formatting (bugzilla
-	#10435)
-	  - move package_needed_for_partition_type() from fsedit to fs::format
-	  - create check_package_is_installed() in fs::format and use it
-
-	* fsedit.pm: fsedit::check_fs_type() is now fs::type::check()
-	  - move package_needed_for_partition_type() from fsedit to fs::format
-	  - create check_package_is_installed() in fs::format and use it
-
-	* fs/type.pm: fsedit::check_fs_type() is now fs::type::check()
-
-2004/08/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* c/Makefile.PL: fix build
-
-	* standalone/drakups: clean spacing
-	(add_device_wizard) fix string
-
-2004/08/02  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: updated installed packages for 10.1
-
-2004/08/02  jjorge
-
-	* share/po/pt.po: install lover
-
-2004/08/02  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: in sagem start section, modprobe eagle-usb and do not
-	wait for sync
-	here, fctStartAdsl will handle that when pppd is called
-	in speedtouch start section, modprobe speedtch module and use
-	speedtouch-start instead of directly using modem_run
-	in install, run modem start scripts once config is written
-
-2004/08/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/uk.po, share/po/wa.po: updated Farsi file
-
-	* share/po/ar.po: updated Arabic file
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2004/08/02  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: flag rosegarden4 KDE
-
-	* diskdrake/interactive.pm: use fs::format::check_package_is_installed()
-	before formatting (bugzilla #10435)
-	  - move package_needed_for_partition_type() from fsedit to fs::format
-	  - create check_package_is_installed() in fs::format and use it
-	don't call will_tell_kernel() when we have lvm (anthill #994)
-
-	* any.pm, network/network.pm, harddrake/sound.pm, diskdrake/dav.pm,
-	network/netconnect.pm, do_pkgs.pm, network/smb.pm, lvm.pm,
-	network/drakfirewall.pm, network/nfs.pm, standalone/drakups,
-	standalone/drakxtv: introduce ->ensure_binary_is_installed and use it
-
-	* fsedit.pm, fs/format.pm, install_any.pm: 
-	  - move package_needed_for_partition_type() from fsedit to fs::format
-	  - create check_package_is_installed() in fs::format and use it
-
-	* standalone/service_harddrake: check the XF86Config and/or XF86Config-4
-	exist before modifying it
-	(otherwise it creates an empty file) (bugzilla #10487)
-
-2004/08/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* c/Makefile.PL: fix build
-
-	* ugtk2.pm: fix inverted comments
-	(gtktext_insert) merge with text_append() from logdrake:
-	  - name parameters
-	  - provide fast text insertion by using named tags instead of anonymous
-	tags.
-	this is especially usefull in order to speed up programs that use quite
-	a
-	  lot of identical tags such as logdrake (#8412) and rpmdrake
-
-	* standalone/logdrake: perl_checker cleanup
-	(log_output__real) rename it as insert_text_n_scroll() in order to
-	better
-	reflect what it does
-	reuse new ugtk2 infrastructure
-	(log_output) fix tag name (was harmfull but it's just saner anyway)
-
-	* harddrake/autoconf.pm (network_conf) rename o as obj so that pixel isn't
-	confused
-
-	* standalone/drakups (add_device_wizard) fix string
-
-2004/08/01  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: added s2u
-
-2004/08/01  fwang
-
-	* standalone/drakbackup, standalone/harddrake2, standalone/drakups:
-	several typos fix
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/08/01  hilbert
-
-	* share/po/zh_TW.po: DrakX-zh_TW: 75
-	Choose the...
-
-2004/08/01  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/07/30  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/draksplash2: draksplash2 is here until merged in draksplash
-
-2004/07/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* lang.pm: support nabi input method too
-	support im-ja input method too
-
-	* drakxtools.spec: log more stuff into 10.1-0.2mdk
-	10.1-0.2mdk
-
-	* standalone/net_applet: keep strings synced and warn both coders and
-	translators about it
-	fix timeout usage
-	like in all other tools, revert ugly code printing "This program
-	cannot be run in console mode", which is easier done in ugtk2.pm
-	do not enforce parameter position in translatable strings
-
-	* share/po/br.po, share/po/fr.po: update
-
-	* ugtk2.pm (shrink_topwindow) drop Gtk+-2.[02]x support
-
-	* any.pm (selectCountry) let's have a better looking GUI by preventing
-	uneeded
-	scrollbar on pull down menu
-	(selectCountry) use a combo box rather than a list for listing input
-	methods
-
-2004/07/30  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/netconnect.pm: offer to connect for pppoe connexions too
-
-	* mdk-stage1/stage1.c: revert previous commit, that won't work after
-	pivot_root (proc has to
-	be mounted, insmod would have to be able to find the modules in the
-	new root)
-	revert previous commit, that won't work after pivot_root (proc has to
-	be mounted, insmod would have to be able to find the modules in the
-	new root), we'll have to use hotplug to load eagle-usb drivers in Move
-	(in next release maybe)
-
-	* network/adsl.pm: sagem: use fctStartAdsl to wait for sync, up the
-	interface and get interface name
-	modprobe eagle-usb for sagem modems (useful if coldplug doesn't work)
-
-2004/07/30  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/draksplash2: draksplash2 is here until merged in draksplash
-
-	* share/rpmsrate: authentication installs perl-Net-DNS in some cases
-	authentication installs perl-Net-DNS in some cases
-
-	* any.pm, lang.pm: cleanup
-
-2004/07/30  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fixes for Anthill #1009, #1010 (DVD recording,
-	disk quota)
-	Direct-to-tape enahancement
-	Fixes for AntHill #1009, #1010.
-
-2004/07/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: log more stuff into 10.1-0.2mdk
-	10.1-0.2mdk
-
-	* standalone/service_harddrake: do not offer to configure mouse if we've
-	already automatically reconfigure it
-	b/c of 2.4.x vs 2.6.x switch
-
-	* any.pm (selectCountry) let's have a better looking GUI by preventing
-	uneeded
-	scrollbar on pull down menu
-	(selectCountry) use a combo box rather than a list for listing input
-	methods
-	enable one to choose its input method in advanced mode
-
-	* standalone/drakgw (outpend) clean by reusing MDK::Common
-
-	* lang.pm: support nabi input method too
-	support im-ja input method too
-	enable one to choose its input method in advanced mode
-
-	* security/help.pm, security/msec.pm, security/l10n.pm: sync with
-	msec-0.44
-
-2004/07/30  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: Clean ldap client configuration
-
-2004/07/30  yrahal
-
-	* share/po/ar.po: Arabeyes.org's Arabic translation
-	Sync with Arabeyes CVS
-
-2004/07/29  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: split server and plugin options, in order to support
-	again bewan
-	modems (pppd_options wasn't used anywhere, they couldn't work)
-	add newline at end of net_cnx_up script
-	use connect option or pppd in net_cnx_up, not both
-	(to fix weird pppoe net_cnx_up script)
-
-2004/07/29  Pixel  <pixel at mandrakesoft.com>
-
-	* authentication.pm: cleanup, fix various typos
-	(still, ->target seems broken, but i'm not sure, since i couldn't test)
-
-	* fsedit.pm: merge hds() in get_hds() to correctly handle catching cdie
-	when the device is non partionned
-	merge hds() in get_hds() to correctly handle catching cdie when the
-	device is non partionned
-
-	* mdk-stage1/stage1.c, mdk-stage1/config-stage1.h: s/MandrakeMove/Move/
-
-2004/07/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* c/stuff.xs.pl, c/Makefile: always include all funcs (these're needed
-	anyway by Move and GlobeTrotter)
-
-	* drakxtools.spec: 10.1-0.1mdk
-
-	* wizards.pm (check_rpm) backport fix from HEAD
-
-	* standalone/service_harddrake: use new set_removable_auto_configurator
-	merge fix from HEAD: do not automatically configure removable media in
-	harddrake GUI (only in harddrake service)
-
-	* network/netconnect.pm (handle_multiple_cnx) only restart network for
-	ADSL if we use an
-	ethernet modem
-
-	* harddrake/data.pm (set_removable_auto_configurator) copy it out from
-	set_removable_configurator()
-	(set_removable_configurator) restore it as of MDK10.0 time
-	merge fix from HEAD: do not automatically configure removable media in
-	harddrake GUI (only in harddrake service)
-
-	* network/tools.pm (remove_initscript) simplify
-
-	* standalone/draksec, standalone/drakedm, standalone/drakgw: standalone
-	tools are *not* chrooted
-
-	* standalone/draksplash (show_prev)
-	  - kill useless variables
-	  - simplify
-	(show_prev) fix preview refresh while simplying code
-	(write_boot_thm) typo fix
-	more cleanups
-	misc cleanups
-	(show_prev) do not crash when the image format is unknown
-	(make_boot_frame) fix it
-
-2004/07/28  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: do not write a blank "pty" option in ppp config file is
-	there is no
-	pty command (should fix some problems with Bewan modems)
-	do not write a blank "pty" option in ppp config file is there is no
-	pty command (should fix some problems with Bewan modems)
-
-	* mdk-stage1/stage1.c: do not probe usb interface too soon, wait for the
-	Move images to be mounted
-	(or else usb drivers won't be automatically loaded at boot with Move)
-	do not probe usb interface too soon, wait for the Move images to be
-	mounted
-	(or else usb drivers won't be automatically loaded at boot with Move)
-
-	* network/netconnect.pm: it's probably better to rely on modem_run since
-	speedtouch.sh may be dropped
-
-2004/07/28  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/type.pm: remove small ugly typo
-
-	* network/smb.pm: 
-	  - use option -g for smbclient -L, this fixes bad parsing of formatted
-	smbclient output
-	  - skip "netlogon" Disk share (lowercase letters)
-
-	* install_steps.pm: explain why we set toFormatUnsure
-
-	* install_any.pm: don't set mount point /mnt/windows for removable devices
-
-	* detect_devices.pm: fix getSCSI_26() not sorting the drives
-	fix getCompaqSmartArray() on 2.6 (since /proc/driver/cciss/cciss0
-	doesn't talk about c0dX anymore)
-	fix getSCSI_26() not sorting the drives
-
-2004/07/28  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakTermServ: Fix crashes on
-	append_set.
-
-2004/07/28  Pixel  <pixel at mandrakesoft.com>
-
-	* fs/type.pm: remove small ugly typo
-
-	* detect_devices.pm: fix getSCSI_26() not sorting the drives
-	fix getCompaqSmartArray() on 2.6 (since /proc/driver/cciss/cciss0
-	doesn't talk about c0dX anymore)
-	fix getSCSI_26() not sorting the drives
-
-2004/07/27  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - scroll down text while typing
-	  - many cleanups
-	  - Stable releases are 'Official' and 'Community'
-
-2004/07/27  jjorge
-
-	* share/po/pt.po: bunch of work
-
-2004/07/27  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: '-e 1' option is unneeded with speedtouch >= 1.3
-
-2004/07/27  Pixel  <pixel at mandrakesoft.com>
-
-	* lvm.pm: 
-	  - add field {fs_type} partially replacing {pt_type}
-	{pt_type} is always a number, {fs_type} is always a string
-	  - introduce set_isFormatted()
-	  (to ensure {notFormatted} but also {fs_type_from_magic} and
-	{bad_fs_type_magic} are updated)
-	  - don't use 0x483 for ext3 anymore (same for reiserfs...),
-	  the type_name gives both a pt_type and a fs_type
-	  - many accessors from partition_table removed (type2fs(),
-	fs2pt_type())
-	  - remove isThisFs() (not useful anymore since we can use directly
-	{fs_type})
-	  - remove isFat() (inline the function)
-	  - other isXXX() from partition_table are moved to fs::type
-	  - part2name() is now fs::type::part2type_name
-	  - name2pt_type() is now fs::type::type_name2subpart()
-	  - partition_table::important_types() is now fs::type::type_names()
-	  - fsedit::typeOfPart() is now fs::type::fs_type_from_magic()
-	
-	  - no need to truncate type_name since they are shorter
-	a {type} didn't get moved to {pt_type}, fixing
-
-	* loopback.pm, any.pm, partition_table/mac.pm, partition_table/bsd.pm,
-	diskdrake/interactive.pm, partition_table/dos.pm, fs.pm,
-	install_steps.pm, diskdrake/removable.pm, bootloader.pm,
-	partition_table/sun.pm, partition_table/gpt.pm,
-	install_steps_interactive.pm, network/smbnfs.pm, diskdrake/dav.pm,
-	diskdrake/hd_gtk.pm, fs/type.pm, fsedit.pm, install2.pm, raid.pm,
-	fs/format.pm, install_interactive.pm, install_any.pm,
-	partition_table.pm: 
-	  - add field {fs_type} partially replacing {pt_type}
-	{pt_type} is always a number, {fs_type} is always a string
-	  - introduce set_isFormatted()
-	  (to ensure {notFormatted} but also {fs_type_from_magic} and
-	{bad_fs_type_magic} are updated)
-	  - don't use 0x483 for ext3 anymore (same for reiserfs...),
-	  the type_name gives both a pt_type and a fs_type
-	  - many accessors from partition_table removed (type2fs(),
-	fs2pt_type())
-	  - remove isThisFs() (not useful anymore since we can use directly
-	{fs_type})
-	  - remove isFat() (inline the function)
-	  - other isXXX() from partition_table are moved to fs::type
-	  - part2name() is now fs::type::part2type_name
-	  - name2pt_type() is now fs::type::type_name2subpart()
-	  - partition_table::important_types() is now fs::type::type_names()
-	  - fsedit::typeOfPart() is now fs::type::fs_type_from_magic()
-	
-	  - no need to truncate type_name since they are shorter
-
-2004/07/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/net_monitor: save/restore options
-
-2004/07/26  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/07/26  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/tools.pm: remove unneeded quotes
-	let perl-MDK-Common do the quoting
-
-2004/07/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/be.po: small fix
-
-	* share/po/bn.po: updated Bengali file
-
-2004/07/26  Pixel  <pixel at mandrakesoft.com>
-
-	* .perl_checker: blacklist Net::DNS (until we get rid of it?)
-
-	* authentication.pm: cleanup, fix various typos
-	(still, ->target seems broken, but i'm not sure, since i couldn't test)
-
-	* tools/make_mdkinst_stage2, install_steps_gtk.pm, docs/README,
-	Makefile.config, mdk-stage1/disk.c, pkgs.pm, mdk-stage1/doc/TECH-INFOS,
-	share/po/Makefile, install_steps.pm, standalone/drakpxe,
-	Makefile.drakxtools, Makefile, mdk-stage1/config-stage1.h, lang.pm,
-	tools/Makefile, install2.pm, modules.pm, rescue/Makefile,
-	share/advertising/Makefile, mdk-stage1/network.c,
-	tools/i386/netboot/menu.lst.example, install_any.pm: adapt to new
-	directories layout:
-	  - Mandrake/mdkinst -> install/stage2/live
-	  - Mandrake/base/mdkinst_stage2.bz2 ->
-	install/stage2/mdkinst_stage2.bz2
-	  - Mandrake/base/rpmsrate -> media/media_info/rpmsrate
-	  - Mandrake/RPMS -> media/main
-	  - images -> install/images
-	  - isolinux -> install/isolinux
-	  - Mandrake/share/advertising -> install/extra/advertising
-
-	* fs/format.pm: fix typo
-
-	* detect_devices.pm: fix getCompaqSmartArray() on 2.6 (since
-	/proc/driver/cciss/cciss0 doesn't talk about c0dX anymore)
-
-2004/07/26  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* ugtk2.pm: Redundant line.
-
-2004/07/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakauth, authentication.pm, network/smb.pm: merge auth fixes
-	from HEAD
-
-2004/07/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/be.po: small fix
-
-2004/07/26  Pixel  <pixel at mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2, install_steps_gtk.pm, docs/README,
-	Makefile.config, mdk-stage1/disk.c, pkgs.pm, mdk-stage1/doc/TECH-INFOS,
-	share/po/Makefile, install_steps.pm, standalone/drakpxe,
-	Makefile.drakxtools, Makefile, mdk-stage1/config-stage1.h, lang.pm,
-	tools/Makefile, install2.pm, modules.pm, rescue/Makefile,
-	share/advertising/Makefile, mdk-stage1/network.c,
-	tools/i386/netboot/menu.lst.example, install_any.pm: adapt to new
-	directories layout:
-	  - Mandrake/mdkinst -> install/stage2/live
-	  - Mandrake/base/mdkinst_stage2.bz2 ->
-	install/stage2/mdkinst_stage2.bz2
-	  - Mandrake/base/rpmsrate -> media/media_info/rpmsrate
-	  - Mandrake/RPMS -> media/main
-	  - images -> install/images
-	  - isolinux -> install/isolinux
-	  - Mandrake/share/advertising -> install/extra/advertising
-
-	* fs/format.pm: fix typo
-
-2004/07/23  fisher
-
-	* share/po/uk.po: Ukrainian translation update.
-
-2004/07/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakconnect: remove useless $lan_button and $host_button in
-	old drakconnect
-	cosmetics (remove useless blanks at end of line)
-	prepare for network::tools::reread_net_conf removal
-
-	* network/network.pm: hey, I suck, that's DIAL_ON_IFUP, not DIAL_ON_BOOT
-	  - introduce ONBOOT and DIAL_ON_BOOT settings for isdn connections
-	  - write this settings with configureNetwork2, kill the old tweak in
-	isdn.pm
-	  - use the isdn_dial_on_boot step instead of nework_on_boot in
-	netconnect.pm
-
-	* network/adsl.pm: pptp connections are now handled by pppd (#6515)
-
-	* network/isdn.pm: 
-	  - introduce ONBOOT and DIAL_ON_BOOT settings for isdn connections
-	  - write this settings with configureNetwork2, kill the old tweak in
-	isdn.pm
-	  - use the isdn_dial_on_boot step instead of nework_on_boot in
-	netconnect.pm
-	FIRMWARE isn't used by ifup-ippp
-
-	* network/netconnect.pm: hey, I suck, that's DIAL_ON_IFUP, not
-	DIAL_ON_BOOT
-	perl_checker compliance
-	one more FIXME comment
-	  - introduce ONBOOT and DIAL_ON_BOOT settings for isdn connections
-	  - write this settings with configureNetwork2, kill the old tweak in
-	isdn.pm
-	  - use the isdn_dial_on_boot step instead of nework_on_boot in
-	netconnect.pm
-
-2004/07/23  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm, fs/format.pm: replace pt_type2name($part->{pt_type}) with
-	part2name($part)
-	(hoisting the dereferencing {pt_type})
-	  - move format related functions out of fs.pm to new module
-	fs/format.pm
-	  - remove swap.pm, moving its few functions to fs/format.pm or fs.pm
-
-	* diskdrake/hd_gtk.pm, install_any.pm: replace
-	pt_type2name($part->{pt_type}) with part2name($part)
-	(hoisting the dereferencing {pt_type})
-
-	* tools/mkhdlist: obsolete since 4 years
-
-	* partition_table.pm: replace pt_type2name($part->{pt_type}) with
-	part2name($part)
-	(hoisting the dereferencing {pt_type})
-	  - simplify partition table entry names (based on fdisk's names)
-	  - rename some internal variables
-	old dos is not useful anymore
-	simplify
-
-	* tools/updatehdlist: remove fpons only tool
-
-	* diskdrake/interactive.pm: replace pt_type2name($part->{pt_type}) with
-	part2name($part)
-	(hoisting the dereferencing {pt_type})
-	  - move format related functions out of fs.pm to new module
-	fs/format.pm
-	  - remove swap.pm, moving its few functions to fs/format.pm or fs.pm
-	fix indentation
-
-	* loopback.pm, raid.pm, commands.pm, swap.pm: 
-	  - move format related functions out of fs.pm to new module
-	fs/format.pm
-	  - remove swap.pm, moving its few functions to fs/format.pm or fs.pm
-
-2004/07/23  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: remove print coin and pwet in find_srv_name function
-	clean function find_srv_name
-	Add "net time set -S $server" to AD et SMBKRB config, for clock sync
-	(kerberos require)
-
-2004/07/22  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/network.pm: rewrite read_tmdns_conf to use cat_
-	perl_checker/misc fixes
-
-2004/07/22  Pixel  <pixel at mandrakesoft.com>
-
-	* modules/any_conf.pm: perl_checker enhancement
-	add $Id
-	modules::modprobe_conf now works (at least a little :)
-
-	* fsedit.pm: shorter and faster
-	set {is_removable} directly in fsedit::hds()
-
-	* modules/modprobe_conf.pm, modules/modules_conf.pm: add $Id
-	modules::modprobe_conf now works (at least a little :)
-
-	* drakxtools.spec: need latest MDK::Common
-
-	* modules.pm: cleanup
-	modules::modprobe_conf now works (at least a little :)
-
-	* fs.pm: set {is_removable} directly in fsedit::hds()
-
-	* detect_devices.pm: 
-	  - isRemovableDrive() removed, partially replaced with may_be_a_hd()
-	  - the main difference is that isRemovableDrive() checked
-	isRemovableUsb() whereas
-	may_be_a_hd() allows more usb removable drives
-	  (esp. memory cards and some usb keys declared as memory cards (0x0c76
-	0x0005))
-	simplify
-	  - re-indent
-	  - use begins_with()
-	more cleanup
-	cleanup
-	isRemovableDrive() doesn't check isRemovableUsb() anymore allowing more
-	usb
-	removable drives (esp. some usb keys declared as memory cards (0x0c76
-	0x0005))
-
-	* network/network.pm: perl_checker compliance
-	  - don't use if_() when not needed and strange
-	  - read_tmdns_conf() now knows which file it reads, don't give it as
-	argument
-
-2004/07/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone.pm (rename) only log succesfull renamings
-
-	* network/network.pm (read_tmdns_conf) unbreak oblin code
-	(read_tmdns_conf) reinsert parameter naming for parameter checking
-
-	* drakxtools.spec: bump drakconf conflict due to new drakconnect API
-
-2004/07/21  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/drakautoinst: perl_checker fixes
-
-	* standalone/drakboot, standalone/drakfloppy: remove unused variable
-
-	* standalone/draksec, standalone/drakpxe, network/smb.pm: perl_checker
-	compliance
-
-	* harddrake/autoconf.pm, standalone/service_harddrake: use
-	do_pkgs_standalone->new instead of class_discard
-	  - %modules::conf is no more a global, so many functions need passing
-	$modules_conf
-	  - $modules_conf is a class choosing modules.conf or modprobe.conf
-	(esp. useful after install) (but not working yet!)
-	  - modules::load() doesn't use $modules_conf, use
-	modules::load_and_configure()
-	  - modules::load() doesn't allow options, use either
-	modules::load_raw() or modules::load_and_configure()
-	  - some functions used to want an array ref for modules options and
-	some a string, now every functions use a string
-	  - many functions (like modules::get_alias()) are now methods on
-	$modules_conf
-	  - some functions in mouse.pm needed a $in where a $do_pkgs is enough
-	  - some perl_checker compliance
-	  - small fixes
-
-	* do_pkgs.pm: 
-	  - do_pkgs_standalone->new doesn't *need* a $in anymore
-	  - ->in replace ->{in} so that it can be created on demand (ugly,
-	but...)
-	  ->{in}->do_pkgs gives the same kind of object, removing it
-
-	* standalone/XFdrake: XFdrake doesn't modify modules_conf! (or does it?)
-
-	* network/network.pm, install_steps.pm, network/isdn.pm,
-	install_steps_interactive.pm, network/netconnect.pm, mouse.pm,
-	install2.pm, modules/modprobe_conf.pm, harddrake/v4l.pm,
-	modules/interactive.pm, standalone/mousedrake, commands.pm,
-	printer/detect.pm, printer/main.pm, standalone/printerdrake,
-	harddrake/sound.pm, install_steps_auto_install.pm, network/ethernet.pm,
-	modules/any_conf.pm, standalone/drakconnect, modules/modules_conf.pm,
-	standalone/drakgw, harddrake/data.pm, network/adsl.pm,
-	detect_devices.pm, modules.pm, network/shorewall.pm, network/tools.pm,
-	Xconfig/default.pm, standalone/draksound, install_any.pm,
-	printer/printerdrake.pm, standalone/drakxtv: 
-	  - %modules::conf is no more a global, so many functions need passing
-	$modules_conf
-	  - $modules_conf is a class choosing modules.conf or modprobe.conf
-	(esp. useful after install) (but not working yet!)
-	  - modules::load() doesn't use $modules_conf, use
-	modules::load_and_configure()
-	  - modules::load() doesn't allow options, use either
-	modules::load_raw() or modules::load_and_configure()
-	  - some functions used to want an array ref for modules options and
-	some a string, now every functions use a string
-	  - many functions (like modules::get_alias()) are now methods on
-	$modules_conf
-	  - some functions in mouse.pm needed a $in where a $do_pkgs is enough
-	  - some perl_checker compliance
-	  - small fixes
-
-2004/07/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* .perl_checker: blacklist URPM::Resolve
-
-	* standalone/drakauth: perl_checker fix
-
-	* lang.pm: fix xmodifiers setting which is broken since
-	perl-MDK-Common-1.1.13-1mdk
-
-	* drakxtools.spec: 10-57mdk
-	bump requires on perl-MDK-Common b/c of localedrake vs CJK issue
-
-2004/07/21  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: Add service smb et winbind restart in smbkrb config
-
-2004/07/20  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/tools.pm: merge netconnect::load_conf in netconnect::read_conf
-	(and replace all calls to lload_conf with read_conf, remove all previous
-	calls to read_conf)
-	don't probe again connection type here since now
-	network::netconnect::load_conf does it as intended initially
-
-	* install_steps_interactive.pm: use correct method variable in chooseCD
-	(even if this code is used only in expert
-	mode which isn't anymore supported)
-
-	* network/netconnect.pm: fix perl_checker combo (yeah)
-	oops, fix suckiness
-	use read_net_conf to avoid code duplication
-	merge netconnect::load_conf in netconnect::read_conf (and replace all
-	calls to lload_conf with read_conf, remove all previous calls to
-	read_conf)
-	unused variable
-	don't forget to send $netcnx to network::network::read_all_conf ...
-	(or else we won't get back the probed connection type)
-
-	* standalone/draksound: do not probe devices twice (and avoid to grep on
-	detect_devices::probeall()), cosmetics
-
-	* standalone/net_monitor: merge netconnect::load_conf in
-	netconnect::read_conf (and replace all calls to lload_conf with
-	read_conf, remove all previous calls to read_conf)
-	cosmetics
-	do not allocate new Gtk2::Gdk::GC at each redraw (last memory leak
-	fixed ?)
-	use the power of the Gtk2::Dialog widget, thus giving change_color()
-	more luck to succeed
-	translate connection type (Fabrice Facorat)
-	fix spacing (from Fabrice Facorat, #10300), remove blank line
-
-	* standalone/drakconnect: maxi perl_checker compliance combo
-	do not read conf in add_intf, this is already done by the netconnect
-	wizard
-	merge netconnect::load_conf in netconnect::read_conf (and replace all
-	calls to lload_conf with read_conf, remove all previous calls to
-	read_conf)
-
-2004/07/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/translation_size.pl, share/po/be.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/he.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/ltg.po, share/po/nb.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/uk.po, share/po/mn.po, share/po/am.po, lang.pm,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/fur.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/vi.po, share/po/fr.po, share/po/ta.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/validate.pl, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/uz@Latn.po:
-	changed MandrakeSoft -> Mandrakesoft
-
-2004/07/20  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: remove debugging code
-
-	* authentication.pm, install_steps_gtk.pm: perl_checker compliance
-
-	* mdk-stage1/dns.c, mdk-stage1/pcmcia_/cardmgr.c, standalone/drakfirewall,
-	share/advertising/pwp-02.pl, rescue/restore_ms_boot,
-	mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, tools/genmodparm,
-	tools/gencryptofiles, rescue/tree/sbin/fakeshutdown, standalone/drakpxe,
-	mdk-stage1/config-stage1.h, standalone/drakvpn, standalone/drakboot,
-	standalone.pm, mdk-stage1/init-libc-headers.h, standalone/drakTermServ,
-	mdk-stage1/mar/mar-frontend.c, mdk-stage1/probing.h,
-	standalone/drakbackup, mdk-stage1/pcmcia_/probe.c,
-	mdk-stage1/insmod-busybox/insmod-frontend.c,
-	tools/serial_probe/serial_probe.c, mdk-stage1/disk.h,
-	mdk-stage1/modules.c, mdk-stage1/mount.c, standalone/printerdrake,
-	standalone/fileshareset, standalone/drakedm, mdk-stage1/modules.h,
-	share/advertising/dwd-01.pl, mdk-stage1/mar/mar.h,
-	share/advertising/dis-01.pl, standalone/drakhelp, standalone/XFdrake,
-	mdk-stage1/insmod.h, mdk-stage1/rp-pppoe/src/Makefile,
-	mdk-stage1/pcmcia_/pcmcia.h, standalone/drakupdate_fstab,
-	mdk-stage1/bzlib/Makefile, scanner.pm, mdk-stage1/Makefile.common,
-	mdk-stage1/stdio-frontend.c, standalone/drakproxy,
-	tools/ppc/mkINSTALLCD, share/advertising/dwd-06.pl,
-	mdk-stage1/rescue-gui.c, mdk-stage1/nfsmount.c, mdk-stage1/network.h,
-	mdk-stage1/doc/README, mdk-stage1/log.h, standalone/drakfloppy,
-	mdk-stage1/newt/Makefile, standalone/drakfont,
-	mdk-stage1/newt-frontend.c, share/advertising/ppp-01.pl,
-	rescue/tree/etc/profile, share/advertising/dis-09.pl,
-	mdk-stage1/network.c, mdk-stage1/disk.c, rescue/guessmounts,
-	mdk-stage1/url.c, standalone/logdrake, mdk-stage1/automatic.h,
-	mdk-stage1/frontend.h, mdk-stage1/insmod-modutils/insmod-frontend.c,
-	rescue/lsparts, mdk-stage1/usb-resource/Makefile, mdk-stage1/url.h,
-	mdk-stage1/probing.c, mdk-stage1/mar/mar-extract-only.h,
-	mdk-stage1/cdrom.c, mouse.pm, mdk-stage1/lomount.h, mdk-stage1/dhcp.h,
-	standalone/net_monitor, mdk-stage1/stage1.c, diskdrake/diskdrake.html,
-	mdk-stage1/dhcp.c, mdk-stage1/init.c, mdk-stage1/pci-resource/Makefile,
-	mdk-stage1/mkinitrd_helper/Makefile, install2, mdk-stage1/Makefile,
-	rescue/install_bootloader, mdk-stage1/lomount.c, mdk-stage1/adsl.h,
-	share/advertising/ppp-09.pl, mdk-stage1/adsl.c, mdk-stage1/dns.h,
-	mdk-stage1/automatic.c, mdk-stage1/mar/mar-extract-only.c,
-	standalone/drakconnect, tools/shift_img.c, standalone/drakbug,
-	tools/make_lang_png_transparent.c, mdk-stage1/frontend-common.c,
-	standalone/draksound, standalone/drakxtv, mdk-stage1/tools.h,
-	share/compssUsers.server, mdk-stage1/slang/Makefile,
-	mdk-stage1/minilibc.h, standalone/drakautoinst, mdk-stage1/cdrom.h,
-	mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/stage1.h,
-	standalone/diskdrake, mdk-stage1/doc/documented..frontend.h,
-	mdk-stage1/mount.h, mdk-stage1/directory.c, rescue/drvinst,
-	mdk-stage1/mar/Makefile, mdk-stage1/directory.h, mdk-stage1/log.c,
-	install_messages.pm, mdk-stage1/modules_descr.h, standalone/drakgw,
-	mdk-stage1/pcmcia_/Makefile, mdk-stage1/tools.c,
-	share/advertising/pwp-01.pl, tools/syncrpms,
-	share/advertising/pwp-08.pl, mdk-stage1/ppp/pppd/Makefile,
-	standalone/scannerdrake, mdk-stage1/minilibc.c: MandrakeSoft ->
-	Mandrakesoft
-
-	* share/list: adapt to file renaming
-
-2004/07/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* authentication.pm: better looking wizard
-
-	* lang.pm (write) better check parameter rather than EUID
-	(write) do not bother trying to write /etc/menu-methods/lang.h when
-	run as a user
-
-	* standalone/drakauth: better looking wizard
-	put help out of the radiobutton
-
-2004/07/20  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: remove ask_warn winbind or SFU and add new entry in
-	kinds
-	Add desciption for authentification type
-	Add Entry for IDMAP
-	clean code
-
-	* standalone/drakauth: Add type => 'list' in ask_from
-
-2004/07/20  Pixel  <pixel at mandrakesoft.com>
-
-	* share/list: adapt to file renaming
-
-	* bootloader.pm: remove debugging code
-
-2004/07/20  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: clean code
-
-2004/07/19  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_monitor: use run_program, try to handle default interface
-	better
-	disable the connect button if up interface is found (there is
-	currently no reliable way to find the gateway interface)
-	code factorization, do not use system() but fork() and exec() since we
-	don't
-	want to wait the command to return
-	perl_checker compliance
-	use ifup/ifdown to connect/disconnect
-	no need to be root to monitor connection
-
-	* network/netconnect.pm: use hotplug blacklist for adsl connections too
-
-	* network/network.pm: do not write wireless encryption key if empty
-
-	* network/tools.pm: make the tcp ping actually work
-
-2004/07/19  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: don't bootloader::suggest_floppy
-
-	* bootloader.pm: don't bootloader::suggest_floppy
-	don't unset prompt when timeout is undefined (and don't care when
-	timeout is 0)
-
-	* pkgs.pm: perl_checker compliance
-	add multimedia kernel in analyse_kernel_name
-
-	* tools/hd_grub.cgi, docs/README, rescue/rescue-doc,
-	rescue/tree/etc/issue, rescue/lsparts, docs/HACKING,
-	mdk-stage1/doc/README: replace "Mandrake Linux" with "Mandrakelinux"
-
-	* standalone/bootloader-config: also add long name when adding add short
-	name
-
-2004/07/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-56mdk
-	fix changelog
-	merge changelog from the real update
-
-	* share/po/br.po: update
-
-	* standalone/net_monitor: unsensitive buttons immediatly once ifup/isdown
-	has completed
-
-2004/07/19  Vincent Guardiola <vguardiola at mandrakesoft.com>
-
-	* authentication.pm: modify nss_path one to sub
-	config winbind for AD
-
-	* network/smb.pm: Add function write_smb_ads_conf
-
-2004/07/18  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: save the previous bootloader config file (bugzilla
-	#10072)
-
-2004/07/17  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* pam.net_monitor, drakxtools.spec, apps.net_monitor, Makefile: remove
-	historical consolehelper files (pam.d and console.apps)
-
-2004/07/16  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/tools.pm: use a tcp ping in check_link_beat if not root
-
-	* wizards.pm: do not ask to install already installed packages, prefer to
-	install
-	uninstalled packages (misc)
-
-	* install_steps_gtk.pm: fix predicted time when there is an error
-	installing packages
-
-2004/07/15  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_monitor: add a border spacing of 5 pixel (fix #10299,
-	from Fabrice Facorat)
-
-	* drakxtools.spec: 10-54mdk
-
-2004/07/15  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: change_pt_type() must return a boolean value
-
-	* standalone/bootloader-config: make_boot_splash is no good since the same
-	initrd is used with or without vga=,
-	so call add_boot_splash directly
-
-	* bootloader.pm: make_boot_splash is no good since the same initrd is used
-	with or without vga=,
-	so call add_boot_splash directly
-	alt_xxx instead of old_xxx for bootloader labels (as suggested by
-	Svetoslav Slavtchev on cooker)
-
-	* diskdrake/interactive.pm: encryption key length can now be lower than
-	20, allowing >= 6
-
-2004/07/14  Olivier Blin <oblin at mandrakesoft.com>
-
-	* install_steps_interactive.pm: to_bool is what I was looking for, thanks
-	Pixel
-	perl_checker fix, I should have done it before ...
-	automatically detect which media are available in install from ISO
-	images
-
-	* install_any.pm: remove unneeded return
-	automatically detect which media are available in install from ISO
-	images
-
-	* standalone/drakboot: use bootloader and Xconfig instead of
-	detect-resolution
-
-2004/07/13  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/network.c: umount nfs directory if an error occurs too
-	fix segfault when hostname resolves as weird name without any dot (for
-	example 24.159.64.20 resolves as TN-JACKSN-NR1) and abort domain name
-	guess in this case
-
-	* standalone/net_applet: apply Pixel's suggestion, use //m instead of
-	foreach
-
-	* mdk-stage1/directory.c: don't forget to umount ISO images
-	it is again stupid to use a ramdisk if the install location isn't
-	mounted by loopback
-
-2004/07/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bn.po, share/po/fur.po: Added Bengali and Furlan files
-
-2004/07/13  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm: Some factorization. Protection against /var/lib/urpmi being a
-	dangling symlink (see bug #9934)
-
-2004/07/13  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: cooker logo
-
-2004/07/12  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/07/12  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_applet: perl_checker fixes
-	add a "monitor network" menu item that launches net_monitor
-	use drakconnect to configure network
-	use 'ip route show' to find the gateway device when no GATEWAYDEV is
-	defined
-
-2004/07/12  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm (sort_hds_according_to_bios): when installing on floppy,
-	$boot_hd is undefined, but that's ok (bugzilla #10260)
-
-	* authentication.pm: 
-	  - add "Active Directory" through winbind (it needs more stuff to work)
-	  - drop using $val, use directly $authentication->{XXX}
-
-2004/07/09  Pixel  <pixel at mandrakesoft.com>
-
-	* lang.pm: replace lang::get_unneeded_png_lang_files() with
-	lang::png_lang_files
-
-	* share/list: unicore/PVA.pl is needed
-	  - adapt to new perl
-	  - use "*" instead of PERL_VERSION to be more versatile
-
-	* rescue/make_rescue_img, rescue/list: use "*" instead of PERL_VERSION in
-	list, but ensure only one match
-
-	* install_steps.pm: fix commit 1.685: use lang::analyse_locale_name() but
-	still use lang::l2locale()
-
-	* Makefile: replace lang::get_unneeded_png_lang_files() with
-	lang::png_lang_files
-	ensure "*" to wildcard a directory in share/list match only once
-
-	* tools/Makefile: ask perl where to find package.pm and URPM.pm, this is
-	more versatile than using installvendorlib
-
-	* install2.pm: fix mounting /sys (why did i switch to using syscall_
-	'mount' directly? and with missing parameters!)
-
-	* any.pm: add "ls -l /sys/bus/scsi/devices" in report.bug
-	(it helps for debugging getSCSI on 2.6)
-
-2004/07/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: sort
-	add Robert Vojta
-
-2004/07/09  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: fix mounting /sys (why did i switch to using syscall_
-	'mount' directly? and with missing parameters!)
-
-	* any.pm: add "ls -l /sys/bus/scsi/devices" in report.bug
-	(it helps for debugging getSCSI on 2.6)
-
-2004/07/08  keld
-
-	* share/po/da.po: updates
-	soft/drakcronat/po/da.po soft/drakfax/po/da.po
-	soft/GtkMdkWidgets/po/da.po soft/mdkonline/po/da.po
-	soft/rpmdrake/po/da.po soft/urpmi/po/da.po
-	gi/perl-install/share/po/da.po
-	soft/galaxy/thememdk/mandrake_client/po/da.po
-
-2004/07/08  Pixel  <pixel at mandrakesoft.com>
-
-	* modules.pm: handle s/snd-card/snd/g and
-	s/snd-via686|snd-via8233/snd-via82xx/g more generically
-	in mergein_conf(), get the "above" value, and don't dirty "probeall"
-	rename load_raw() to load_raw_install() and change the prototype
-	cleanup
-	  - create when_load_category()
-	  - replace regexp [uo]hci on module name with testing category
-	"bus/usb"
-	  - move the special case imm ppa from when_load() to load()
-	fix previous commit
-	  - generalize the snd-pcm-oss case
-	  - cleanup
-	  - rename add_alias() into set_alias()
-	  - create set_sound_slot() and use it
-	don't remove "above ... snd-pcm-oss" for the old alias, it's better done
-	explictly, and already done by remove_module()
-
-	* install_steps_interactive.pm: 
-	  - create X_options_from_o() and use it
-	  - add freeDriver boot option
-	when adding users during install, suggest the user names found in /home
-
-	* Xconfig/card.pm, install2.pm, install_steps.pm, install_any.pm: 
-	  - create X_options_from_o() and use it
-	  - add freeDriver boot option
-
-	* lang.pm: merge with MDK-10-update Move changes
-
-	* any.pm: fix typo
-	merge "language choice dialog" from MDK-10-update
-	selectCountry doesn't really need a $o, a $in is enough
-	when adding users during install, suggest the user names found in /home
-
-	* network/adsl.pm, harddrake/sound.pm, detect_devices.pm,
-	network/ethernet.pm: 
-	  - rename add_alias() into set_alias()
-	  - create set_sound_slot() and use it
-
-	* standalone/adduserdrake: when adding users during install, suggest the
-	user names found in /home
-
-2004/07/08  rvojta
-
-	* standalone/drakedm: 
-	  - typo fix (lost -> lose)
-
-2004/07/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: add vincent
-
-	* drakxtools.spec: 10-53mdk final
-
-	* standalone/drakedm: warn the user before dm exit will kill the session
-	(Robert Vojta, #10179)
-
-2004/07/07  Pixel  <pixel at mandrakesoft.com>
-
-	* mouse.pm: fix comment
-	modules::mergein_conf() doesn't need to be given /etc/modules.conf
-	=> prepare for reading either modprobe.conf or modules.conf based on the
-	running kernel version
-
-	* install_steps.pm, install_steps_interactive.pm, install_any.pm: 
-	  - move configure_pcmcia() and write_pcmcia() out of modules.pm to
-	install_any.pm
-	  - load pcmcia_core, $pcic and ds in one call to modules::load
-	  - don't pass prefix to write_pcmcia()
-
-	* modules.pm: fix indentation
-	modules::mergein_conf() doesn't need to be given /etc/modules.conf
-	=> prepare for reading either modprobe.conf or modules.conf based on the
-	running kernel version
-	modules::mergein_conf() doesn't need to be given /etc/modules.conf
-	=> prepare for reading either modprobe.conf or modules.conf based on the
-	running kernel version
-	remove non-useful prototypes ($)
-	use the module category to decide if it needs alias usb-interface or
-	alias ieee1394-controller
-	fix typo
-	  - restrict view of %mappings_24_26 and %mappings_26_24 to modules.pm
-	  - simplify mapping_24_26(), it now takes only one module name, not a
-	list
-	  - simplify mapping_26_24(), the special case is handled properly in
-	%mappings_26_24
-	  - move configure_pcmcia() and write_pcmcia() out of modules.pm to
-	install_any.pm
-	  - load pcmcia_core, $pcic and ds in one call to modules::load
-	  - don't pass prefix to write_pcmcia()
-	create write_preload_conf()
-
-	* standalone/XFdrake: modules::mergein_conf() doesn't need to be given
-	/etc/modules.conf
-	=> prepare for reading either modprobe.conf or modules.conf based on the
-	running kernel version
-	modules::mergein_conf() doesn't need to be given /etc/modules.conf
-	=> prepare for reading either modprobe.conf or modules.conf based on the
-	running kernel version
-
-	* standalone/printerdrake, standalone/service_harddrake,
-	network/ethernet.pm, harddrake/data.pm, network/netconnect.pm,
-	install2.pm, modules/interactive.pm, standalone/mousedrake,
-	standalone/draksound, standalone/drakxtv: modules::mergein_conf()
-	doesn't need to be given /etc/modules.conf
-	=> prepare for reading either modprobe.conf or modules.conf based on the
-	running kernel version
-
-2004/07/07  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Merge fixes from Anthill 927, 929.
-	(filenames with spaces, .backupignore, gui behavior)
-	Merge fixes from Anthill 927, 929
-	(filenames with spaces, .backupignore, gui issues)
-
-2004/07/06  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot: update bootsplash even if framebuffer was disabled
-
-	* mdk-stage1/config-stage1.h: add missing slash in Mandrake Move image
-	location
-
-2004/07/06  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/config-stage1.h: fix blino fix
-	doing basename is dumb (is blino too?), really make the symlink relative
-
-	* mdk-stage1/disk.c: 
-	  - when the directory is bad, go back to choose another directory
-	instead of choosing another device
-	(you can still use "Cancel" to choose another device)
-	  - list files in directory given, not the root directory of the device
-
-	* standalone/bootloader-config: fix typo
-	  - nicer "usage: ..."
-	  - add actions "add-entry" and "remove-entry"
-	  - add option --label
-	  - add option --chainload
-	  - rename --vmlinuz to --image
-
-	* bootloader.pm: remove unneeded spaces in append=" foo"
-	write_lilo handles "optional"
-	rename var
-	cleanup
-	cleanup
-
-	* mdk-stage1/directory.c: doing basename is dumb (is blino too?), really
-	make the symlink relative
-
-	* Xconfig/xfree.pm: add 1024x480 (part of bugzilla #5192)
-
-	* Xconfig/resolution_and_depth.pm: rename function $set_chosen_x_res to
-	$set_chosen_resolution (since it sets both)
-	(choose_gtk): ensure default height is the chosen one
-
-2004/07/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* c/stuff.xs.pl: workaround blind gwenole
-	workaround build with new kernels
-
-	* standalone/service_harddrake: high level explanation
-
-	* drakxtools.spec: 10-53mdk
-
-2004/07/06  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: 
-	  - when the directory is bad, go back to choose another directory
-	instead of choosing another device
-	(you can still use "Cancel" to choose another device)
-	  - list files in directory given, not the root directory of the device
-
-	* mdk-stage1/config-stage1.h, mdk-stage1/directory.c: doing basename is
-	dumb (is blino too?), really make the symlink relative
-
-2004/07/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake: high level explanation
-
-2004/07/05  jjorge
-
-	* share/po/pt.po: rush to beta one man
-
-2004/07/05  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/network.c: properly handle error return code in nfs install
-
-	* install_any.pm: allow medium change in nfs-iso install
-
-	* standalone/net_monitor: try to use $default_intf (and fix the last
-	perl_checker warning, yeah)
-	perl_checker compliance
-	rename $echr and $echt to $scale_r and $scale_t
-	remove unused variable $type
-
-2004/07/05  Pixel  <pixel at mandrakesoft.com>
-
-	* log.pm: use $LOG instead of *LOG
-
-	* standalone/draksec: fix #-PO: comment
-
-	* install_steps.pm: big renaming of field {type} to {pt_type},
-	this will allow defining {fs_type} which will always be a string
-	whereas {pt_type} will always be a number
-	allow getpwnam, getgrnam, getgrid to work
-
-	* any.pm, partition_table/mac.pm, partition_table/bsd.pm,
-	partition_table/dos.pm, diskdrake/removable.pm, partition_table/sun.pm,
-	partition_table/gpt.pm, install_steps_interactive.pm, network/smbnfs.pm,
-	diskdrake/dav.pm, diskdrake/hd_gtk.pm, lvm.pm, raid.pm,
-	install_interactive.pm, install_any.pm, partition_table/raw.pm,
-	partition_table.pm: big renaming of field {type} to {pt_type},
-	this will allow defining {fs_type} which will always be a string
-	whereas {pt_type} will always be a number
-
-	* drakxtools.spec: drakxtools-backend needs ldetect-lst (for
-	complete_usb_storage_info())
-
-	* fsedit.pm: big renaming of field {type} to {pt_type},
-	this will allow defining {fs_type} which will always be a string
-	whereas {pt_type} will always be a number
-	create rationalize_options() and use it (bugzilla #3525)
-	more checks should be done in this function, and used at more places
-	(but where?)
-
-	* bootloader.pm: big renaming of field {type} to {pt_type},
-	this will allow defining {fs_type} which will always be a string
-	whereas {pt_type} will always be a number
-	drop "other" entries in grub conf when the device is unknown
-	  - handle missing root=/dev/xxx kernel commandline parameter
-	  - handle grub splashimage option
-	oops, revert debugging code
-
-	* standalone/bootloader-config: drop --no-link option (already replaced by
-	--no-short-name)
-	  - new option --no-short-name which implies no short labels (usually
-	vmlinuz) and no symlinks (usually /boot/vmlinuz)
-	  - rename --no-link to --no-short-name (keeping compatibility for a few
-	days)
-
-	* fs.pm: big renaming of field {type} to {pt_type},
-	this will allow defining {fs_type} which will always be a string
-	whereas {pt_type} will always be a number
-	create rationalize_options() and use it (bugzilla #3525)
-	more checks should be done in this function, and used at more places
-	(but where?)
-	don't set {major} and {minor} to 0 when the device doesn't exist
-
-	* diskdrake/interactive.pm: fix function call
-	big renaming of field {type} to {pt_type},
-	this will allow defining {fs_type} which will always be a string
-	whereas {pt_type} will always be a number
-
-2004/07/03  jjorge
-
-	* share/po/pt.po: saraiva esta rapido ;-)
-
-2004/07/03  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: fix typo
-
-2004/07/02  fisher
-
-	* share/po/uk.po: Ukrainian translation update.
-
-2004/07/02  Olivier Blin <oblin at mandrakesoft.com>
-
-	* network/adsl.pm: remove spurious '"pty ', I suck
-	pptp support (partial fix for #6515)
-
-2004/07/02  Pixel  <pixel at mandrakesoft.com>
-
-	* drakxtools.spec: ensure proper upgrade: explictly tell urpmi that old
-	drakxtools-newt conflicts with drakxtools-backend
-
-	* authentication.pm: cleanup
-
-2004/07/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-52mdk
-
-	* lang.pm: switch to new japanese fonts (UTUMI Hirosi
-	<utuhiro78@yahoo.co.jp>)
-	(write) let be aware of install mode
-	(write) configure menu-method's language too so that altering language
-	is done for KDE menu entries too (instead of just programs' messages)
-
-2004/07/02  vguardiola
-
-	* authentication.pm: Add anonymous bind
-	remove anonymous entry
-	add libsasl2-plug-gssapi when AD is selected
-	Change SSL/TLS to SSL or TLS
-	add uc_domain to realm section in /etc/krb5.conf
-	padbol
-
-2004/07/01  Olivier Blin <oblin at mandrakesoft.com>
-
-	* any.pm: add fluxbox in known window managers list
-
-	* mdk-stage1/network.c: rephrase previous patch, with correct indentation
-	this time
-	add a slash at beginning of the given directory if not already present
-	(ftp and http install)
-
-2004/07/01  Pixel  <pixel at mandrakesoft.com>
-
-	* lang.pm: default consolefont is lat0-16, no more lat0-sun16
-
-	* authentication.pm, bootloader.pm: fix typo
-
-	* standalone/draksplash, standalone/printerdrake, standalone/logdrake,
-	standalone/draksec, standalone/drakfloppy, standalone/drakfont,
-	standalone/drakbug, standalone/drakperm, standalone/harddrake2,
-	standalone/drakTermServ, standalone/net_monitor, standalone/drakclock,
-	standalone/drakups: revert ugly code printing "This program cannot be
-	run in console mode",
-	it is easily done in ugtk2.pm
-
-	* Xconfig/xfree.pm: fix typo causing multiple "Keyboard" entries in
-	XF86Config (bugzilla #10163)
-
-	* drakxtools.spec: create package drakxtools-backend
-
-	* mdk-stage1/modules.c, install2.pm: stage1 used to write files
-	/tmp/network, /tmp/ifcfg-eth0, /etc/modules.conf
-	but those files are in /stage1 after pivot rooting, so:
-	  - write modules.conf in /tmp instead of /etc
-	  - cp those files from /stage1/tmp to /tmp before umounting /stage1
-
-2004/07/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm, standalone/harddrake2: typo fix
-
-	* drakxtools.spec: add bug reference
-	10-50mdk
-
-2004/06/30  fisher
-
-	* share/po/uk.po: Ukrainian translation update
-	Sync'ed with .pot
-
-2004/06/30  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/06/30  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/net_monitor: try to display arrows closely to transmission
-	values
-	always draw an arrow next to transmitted amount
-	always display a speed label for transmitted graph
-	allow the user to use different scales for received and transmitted
-	prepare code to use distinct scales for received and transmitted
-	remove most magic numbers, prefer usage of $width and $height
-
-2004/06/30  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: use print + exit instead of die
-	(so that standalone tools don't need to do it by hand)
-
-	* standalone/bootloader-config: when doing update_splash or remove_splash,
-	call when_config_changed (mainly for lilo)
-	please perl_checker
-
-	* network/smb.pm: shut up "smbclient -L"
-
-	* authentication.pm: for Active Directory, allow: Kerberos, SSL/TLS,
-	simple and anonymous
-
-2004/06/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakfloppy (build_it) add translator hint
-
-	* standalone/net_monitor: fix button layout
-
-2004/06/29  fisher
-
-	* share/po/uk.po: translation update
-
-2004/06/29  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/network.c: properly handle "back" behavior in mirror list
-	step
-	do not unset automatic if mirror list selection fails, we know it wasn't
-	automatic at that point
-	remove http proxy settings from interface structure, that was really
-	dumb
-	allow to use a specific ACNAME for pppoe connections
-
-	* standalone/drakupdate_fstab: use fsedit::is_same_hd in drakupdate_fstab
-	and revert previous change in fs::subpart_from_wild_device_name (do not
-	fill both devfs_device and device fields)
-
-	* fs.pm: use fsedit::is_same_hd in drakupdate_fstab and revert previous
-	change in fs::subpart_from_wild_device_name (do not fill both
-	devfs_device and device fields)
-	do not add default device in device hash, it will be filled with result
-	from fs::subpart_from_wild_device_name
-	always update $part{device} in fs::subpart_from_wild_device_name because
-	/dev is stripped (fix #6982, #10175)
-
-	* mdk-stage1/tools.c, mdk-stage1/directory.c, mdk-stage1/probing.c:
-	variable declaration fixes (spotted by neofutur)
-
-	* mdk-stage1/network.h: remove http proxy settings from interface
-	structure, that was really dumb
-	allow to use a specific ACNAME for pppoe connections
-
-	* mdk-stage1/adsl.c: allow to use a specific ACNAME for pppoe connections
-
-2004/06/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uz.po, share/po/et.po, share/po/uz@Latn.po: updated Estonian
-	and Uzbek files
-
-2004/06/29  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: in is_same_hd(), both hds can have {device} unset, it doesn't
-	mean they are the same
-
-	* drakxtools.spec: 
-	  - add bootloader-config (used by bootloader-utils and bootsplash
-	scripts)
-	  - drakboot (pixel):
-	o major backend rewrite b/c of code sharing with new installkernel
-	  o when adding a new kernel, have a nicer new name for conflicting
-	    entry
-	  o when modifying kernel parameters in all entries, skip the
-	    "failsafe" entry (#10143)
-	  o when modifying a symlink, ensure we also use the long name for the
-	    old symlink in the existing entries
-	  - drakconnect (Olivier Blin):
-	  o never disable "DHCP host name" entry box, it shouldn't be linked
-	    with "Assign host name from DHCP address" checkbox (#2759, #9981)
-	  o unblacklist sis900 since its link beat detection works with latest
-	    kernels
-	  - draksound: remove unneeded "above" lines in modules::write_conf
-	  (Olivier Blin) (#8288)
-	  - ugtk2 layer: catch missing wizard pixmap, otherwise we end up with
-	  unshown windows and error messages can't pop up (pixel)
-	  - don't require mkbootdisk
-
-	* Makefile: add missing share/net_monitor.desktop
-
-	* bootloader.pm: 
-	  - mkinitrd() calls make-boot-splash after building the initrd
-	(since /sbin/mkinitrd doesn't do it anymore)
-	  - change mkinitrd() parameters
-	  - change add_kernel() parameters and add option b_no_initrd
-	  (it is available in installkernel though i suspect it is unused)
-	  - after reading config file, get {perImageAppend} and {default_vga}
-	  (it was only done for lilo and {perImageAppend})
-	  - keep the current kernel for linux-nonfb too (it was only done for
-	failsafe)
-	  - add create_link_source(), action(),
-	when_config_changed_{lilo,grub,yaboot}
-	  - create write_yaboot()
-
-	* Makefile.config, standalone/bootloader-config: add bootloader-config
-	(tested for adding and removing in simple cases)
-
-	* .perl_checker: add "Getopt::Long" (used by bootloader-config)
-
-2004/06/28  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: fix titi's regexp for matching centrino
-
-	* any.pm: don't set ICEAUTHORITY using $ENV{HOME} for kde (bugzilla
-	#10144)
-
-	* bootloader.pm: after install, when modifying kernel parameters in all
-	entries, skip the "failsafe" entry
-	(bugzilla #10143)
-
-	* ugtk2.pm: make perl_checker a little more happy
-	catch missing wizard pixmap, otherwise we end up with WizardWindow being
-	non
-	shown and error messages can't pop up
-	disallow switching to expert mode using Alt-e
-
-2004/06/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* c/Makefile.PL: drop useless linkage since X11 stuff was split out of c
-	module
-
-2004/06/25  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/directory.c: fix typo
-	do not use ramdisk in nfs install
-	add missing include for basename()
-	use relative symlink to image location in disk/nfs install, to have a
-	working stage2
-
-2004/06/25  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: remove deprecated rhimage symlink
-
-	* bootloader.pm: when adding a new kernel, have a nicer new name for
-	conflicting entry
-	when modifying a symlink, ensure we also use the long name for the old
-	symlink in the existing entries
-
-	* install_steps.pm: fix blino stage1 change (i think he likes breaking
-	things ;p)
-	bootloader::add_kernel() do a good job at replacing symlinks with the
-	real
-	kernel/initrd file name, so don't need to do it here
-
-	* install_any.pm: use internal_error() instead of die'ing with no
-	arguments
-	fix blino stage1 change (i think he likes breaking things ;p)
-
-2004/06/25  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/directory.c: fix typo
-	do not use ramdisk in nfs install
-	add missing include for basename()
-	use relative symlink to image location in disk/nfs install, to have a
-	working stage2
-
-	* mdk-stage1/network.c: unset automatic in ftp/http install when ramdisk
-	can't be loaded
-	use new http_proxy variables instead of the old answers (not anymore
-	available)
-
-	* network/netconnect.pm: never disable "DHCP host name" entry box, it
-	shouldn't be linked with ""Assign host name from DHCP address" checkbox
-	(#2759, #9981)
-	unblacklist sis900 since its link beat detection works with latest
-	kernels
-
-2004/06/25  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/drakTermServ: simplify using new bootloader.pm
-
-	* Xconfig/various.pm, any.pm, standalone/drakboot: adapt to new
-	bootloader.pm
-
-	* bootloader.pm: when adding a new kernel, have a nicer new name for
-	conflicting entry
-	when modifying a symlink, ensure we also use the long name for the old
-	symlink in the existing entries
-	fix 2 typos
-	drop obsolete function
-	drop obsolete lnx4win_file()
-	major cleanup and rewrite
-	  - some functions have been renamed
-	  - some functions have changed prototype
-	  - no more bootloader::vga_modes, we use
-	Xconfig::resolution_and_depth::bios_vga_modes()
-	  - no more detectloader, it is now detect_main_method(),
-	but notice that bootloader::read() + bootloader::write() abstract all
-	this!
-	  - update_for_renumbered_partitions() is surely broken :)
-	  - sort_hds_according_to_bios() and mixed_kind_of_disks() uses new
-	function hd2bios_kind()
-	  - new data structure "kernel_str"
-	  - lilo doesn't need so much help as it used to be, so don't put as
-	much
-	  "disk=/dev/sda bios=0x80" as before
-	some goals:
-	  - don't rely on device names
-	  (this allows not to care too much about devfs vs udev vs ...)
-	  - kernels can be named something else than /boot/vmlinuz*,
-	  please use the various functions to construct the initrd file name,
-	the symlink name...
-
-	* fs.pm: 
-	  - enhance subpart_from_wild_device_name() to handle "sda" the same as
-	"/dev/sda" (when /dev/sda exists)
-	  - new function device2part() which uses subpart_from_wild_device_name
-	and the
-	  given fstab to convert the device name to the corresponding structure
-	  (this allows not relying too much on the device name)
-
-	* install2.pm: remove deprecated rhimage symlink
-
-	* install_steps.pm: fix blino stage1 change (i think he likes breaking
-	things ;p)
-	bootloader::add_kernel() do a good job at replacing symlinks with the
-	real
-	kernel/initrd file name, so don't need to do it here
-	adapt to new bootloader.pm
-
-	* install_any.pm: use internal_error() instead of die'ing with no
-	arguments
-	fix blino stage1 change (i think he likes breaking things ;p)
-	  - adapt to new bootloader.pm
-	  - simplify
-
-2004/06/25  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Make perl_checker silent
-
-2004/06/25  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/network.c: unset automatic in ftp/http install when ramdisk
-	can't be loaded
-	use new http_proxy variables instead of the old answers (not anymore
-	available)
-
-2004/06/25  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: drop obsolete function
-	drop obsolete lnx4win_file()
-	major cleanup and rewrite
-	  - some functions have been renamed
-	  - some functions have changed prototype
-	  - no more bootloader::vga_modes, we use
-	Xconfig::resolution_and_depth::bios_vga_modes()
-	  - no more detectloader, it is now detect_main_method(),
-	but notice that bootloader::read() + bootloader::write() abstract all
-	this!
-	  - update_for_renumbered_partitions() is surely broken :)
-	  - sort_hds_according_to_bios() and mixed_kind_of_disks() uses new
-	function hd2bios_kind()
-	  - new data structure "kernel_str"
-	  - lilo doesn't need so much help as it used to be, so don't put as
-	much
-	  "disk=/dev/sda bios=0x80" as before
-	some goals:
-	  - don't rely on device names
-	  (this allows not to care too much about devfs vs udev vs ...)
-	  - kernels can be named something else than /boot/vmlinuz*,
-	  please use the various functions to construct the initrd file name,
-	the symlink name...
-
-	* install_any.pm: 
-	  - adapt to new bootloader.pm
-	  - simplify
-
-	* standalone/drakTermServ: simplify using new bootloader.pm
-
-	* Xconfig/various.pm, any.pm, standalone/drakboot, install_steps.pm: adapt
-	to new bootloader.pm
-
-	* fs.pm: 
-	  - enhance subpart_from_wild_device_name() to handle "sda" the same as
-	"/dev/sda" (when /dev/sda exists)
-	  - new function device2part() which uses subpart_from_wild_device_name
-	and the
-	  given fstab to convert the device name to the corresponding structure
-	  (this allows not relying too much on the device name)
-
-	* share/rpmsrate: 
-	  - scim-uim requires scim, no need to have both
-	  - scim-chinese requires scim, no need to have both
-
-2004/06/24  fisher
-
-	* share/po/uk.po: translation update.
-
-2004/06/24  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* mdk-stage1/probing.c: don't redefine buf for /proc/scsi/scsi (size 5000
-	instead of 2048)
-	don't redefine buf for /proc/scsi/scsi (size 5000 instead of 512)
-
-2004/06/24  Olivier Blin <oblin at mandrakesoft.com>
-
-	* modules.pm: perl_checker compliance
-	remove unneeded "above" lines in modules::write_conf
-	delete "above" lines when removing a sound alias with
-	modules::remove_alias_regexp
-	fix stupid typo
-	in modules::when_load, try to find the best sound slot index instead of
-	always overwritting sound-slot-0 (#7890)
-
-	* network/tools.pm, network/network.pm: properly handle ascii WEP keys
-	(#9884)
-
-2004/06/24  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add gv (not installed by default) to have it in the package tree
-	(bugzilla #10127)
-	  - add pciutils (not installed by default) in MONITORING (but i don't
-	think it will get to the package tree)
-
-	* mouse.pm: module hid is now named usbhid (thanks to svetljo on cooker)
-
-2004/06/24  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* standalone/draksplash, standalone/drakperm, standalone/drakbug,
-	standalone/harddrake2, standalone/printerdrake, standalone/logdrake,
-	standalone/draksec, standalone/drakfloppy, standalone/drakTermServ,
-	standalone/net_monitor, standalone/drakfont, standalone/drakups,
-	standalone/drakclock: Some standalone tools don't compile when run from
-	console
-
-2004/06/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_steps_interactive.pm (acceptLicense) just reboot when one cancel
-	the globetrotter first time wizard
-	(acceptLicense) just reboot when one cancel the globetrotter first time
-	wizard
-
-	* drakxtools.spec: 10-48mdk
-
-	* share/rpmsrate: 
-	  - switch japanese to scim+uim and scim
-	  - switch chinese to scim
-
-	* lang.pm: switch chinese to scim by default
-	fix gtk IM module for scim IM
-	fix xcin IM
-	add back support for kinput2 IM
-	sort CJK's IM entries
-	  - factorize im settings
-	  - change default IM according to cooker-i18n feedback:
-	o default all chinese locales to fctix IM
-	  o default all japanese locales to scim+uim IM
-
-	* standalone/service_harddrake.sh: rollback service priority
-
-2004/06/23  Olivier Blin <oblin at mandrakesoft.com>
-
-	* any.pm: remove global vga choice to please Pixel and Titi
-	add a global vga option in any::setupBootloader__general (fix bug 8957)
-
-	* standalone/drakclock: be mouse wheel aware (fix bug 9926)
-
-	* mdk-stage1/Makefile: define _FILE_OFFSET_BITS=64 so that stat() is large
-	files aware
-
-	* modules.pm: fix another typo from Titi in #9112 fix (#6802)
-
-	* mdk-stage1/directory.c: revert the workaround on stat() now that it
-	works on large files
-
-	* standalone/drakboot: remove unneeded quotes
-	fix processing of config file broken again by Titi
-	please perl_checko the Clean Keeper
-	remove spurious spaces
-	ask for bootloader choice when framebuffer isn't configured (fix bug
-	9925)
-	remove unused variable
-
-2004/06/23  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/monitor.pm: good_default_monitor() should work *nearly*
-	everywhere, so use it for the auto_install fallback
-	(this is used by mandrakemove)
-	good_default_monitor() should work *nearly* everywhere, so use it for
-	the auto_install fallback
-	(this is used by mandrakemove)
-
-	* any.pm: kernelVersion() is unused (only bootloader::mkbootdisk() used
-	it, and it has already been removed)
-
-2004/06/23  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: Make perl_checker happy
-	Support for supplementary CDs during installation (from the 10.0
-	update branch.)
-
-2004/06/23  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: code cleanup per Pixel
-
-2004/06/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm: use upcase letters whenever needed
-
-	* network/netconnect.pm: 
-	  - unblacklist tg3 since QA has confirmed it works smoothly
-	  - blacklist buggy madwifi_pci
-
-	* standalone/drakboot: 
-	  - fix processing of config file broken by magic olivier
-	  - reuse cat_()
-
-	* modules.pm: merge fix from MDK-10-branch: tv modules weren't loaded on
-	boot
-
-	* share/po/br.po: update
-
-2004/06/22  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot: fix indentation
-	do not update bootsplash in autologin wizard
-	remove spurious comma and spaces
-
-	* network/netconnect.pm: rephrase zeroconf dialog (cybercfo)
-	blacklist sis900 and tg3 modules for network hotplugging
-
-2004/06/22  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: 
-	  - use Xconfig::resolution_and_depth::bios_vga_modes() instead of
-	%bootloader::vga_modes
-	  - remove broken sparc code
-
-	* docs/HACKING, install2.pm: rename --test in --testing for install2 (more
-	coherent with standalone tools)
-
-	* ugtk2.pm: 
-	  ->set_title doesn't like title undef, give it '' instead
-	(to remove ugly warnings at install)
-
-	* Xconfig/resolution_and_depth.pm: perl_checker compliance
-	  - export @bios_vga_modes (needed for bootloader vga=)
-	  - to_string should return '' instead of ()
-	remove duplicate (use existing function to_string())
-	sync with detect-resolution
-
-	* bootloader.pm: add check_enough_space() and use it
-	  - fix typo
-	  - remove silo code (sparc)
-
-2004/06/22  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Make the CD-Rom install with supplementary CD work
-	(don't forget to
-	re-mount the main CDs).
-
-	* share/po/fr.po: French translations for new messages
-
-2004/06/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: update fields description (baud
-	<baud123@tuxfamily.org>)
-	update doc urls (baud <baud123@tuxfamily.org>)
-	add new ISP entries (baud <baud123@tuxfamily.org>)
-	fix Telia entry (baud <baud123@tuxfamily.org>)
-	fix Free dns (baud <baud123@tuxfamily.org>)
-	merge duplicate Free entries
-	enhance tel9com name (baud <baud123@tuxfamily.org>)
-	kill duplicate spanish entry (baud <baud123@tuxfamily.org>)
-	enhance a few entries (baud <baud123@tuxfamily.org>)
-	fix spanish isp name
-
-	* drakxtools.spec: fix build broken by net_applet
-	move net_applet in right package (aka drakxtools-gtk)
-	10-47mdk
-
-	* standalone/net_applet: perl_checker fixes
-	(getIP) fix build
-
-2004/06/21  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* Makefile.drakxtools: 
-	  - autostart file for KDE/GNOME
-	  - add net_applet file (installed in bindir)
-
-	* drakxtools.spec: 
-	  - net_applet to watch network connection
-
-	* Makefile.config: 
-	  - added net_applet
-
-	* share/net_applet.desktop: 
-	  - autostart file for KDE/GNOME
-
-	* pixmaps/connected.png, pixmaps/disconnected.png: network applet state
-	icons
-
-	* standalone/net_applet: 
-	  - cleaning titi factorization
-	  - net_applet to watch network connection
-
-2004/06/21  Florin Grad  <florin at mandrakesoft.com>
-
-	* network/shorewall.pm: accept from fw to loc
-
-2004/06/21  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/network.c: allow to use ISO images in NFS install
-
-	* mdk-stage1/directory.c: workaround the fact that stat() fails on large
-	files (like DVD ISO images)
-	add log message when using directory as a mirror tree
-	split directory specific functions and move them from disk.c to
-	directory.c (will be used in NFS install)
-
-	* mdk-stage1/disk.c, mdk-stage1/directory.h: split directory specific
-	functions and move them from disk.c to directory.c (will be used in NFS
-	install)
-
-	* mdk-stage1/Makefile: allow to use ISO images in NFS install
-	split directory specific functions and move them from disk.c to
-	directory.c (will be used in NFS install)
-
-2004/06/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: fix missing trailling quotes
-
-	* standalone/logdrake: kill stupid useless code
-
-	* standalone/harddrake2: do not display version number in title bar since
-	it's useless
-	according to interface team
-
-	* standalone/net_applet (getIP) simplify
-
-2004/06/20  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/06/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/mousedrake: kill dead code
-
-	* standalone/harddrake2: show list of partitions
-	display better info for hard disks
-	really ensure that "identification" section is displayed first
-	still show info field if detect_devices::getIDE() failled to parse it
-	for a
-	known vendor string
-	still show mass media fields for mass media that are not hard disks (eg:
-	cdroms, dvdrom, burners, ...)
-	remove old SCSI garbage code
-	adapt fields name to new behavior of mousedrake on 2.6.x kernels
-	smoother mouse data: sort fields
-	show more fields for mice
-	move mice help where it belongs
-	simplify
-	display media type for mass storage devices
-	fix undisplayed fields:
-	  - if a per-class group exists, prefer it upon generic group
-	  - only care about current group fields, not about those of the group
-	that has
-	the same name in generic
-	show splited vendor and description fields for USB hard disks too
-
-	* share/po/fr.po: spell-check french translations
-	update
-	typo fixes
-
-	* drakxtools.spec: 10-46mdk
-	cleanups build
-	typo fix
-
-	* standalone/service_harddrake: fix logs of newly added hardware
-	fix warnings
-	only log about nv <-> nvidia swtich only if we do have to perform it
-	fix mouse autoconfiguration done on every boot instead of on 2.4.x/2.6.x
-	switches
-	simplify x11 autoconf
-	log error if a tool isn't executable
-	simplify globetrotter case: skip non interactive stuff
-	do not uselessy fork shells
-	log error when we cannot run the config tool
-	faster auto mouse reconfiguration on major kernel switch
-	harddrake wasn't aware of newly added wireless network card since early
-	2004/02
-	fix logs of newly added hardware
-	fix mouse autoconfiguration done on every boot instead of on 2.4.x/2.6.x
-	switches
-
-2004/06/19  yrahal
-
-	* share/po/ar.po: Committing Arabic translation
-	Sync with Arabeyes.org's CVS
-
-2004/06/18  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: in iso install, use ISOPATH environment variable
-	instead of loopback device filename (limited to 64 chars)
-
-	* pkgs.pm: add and use install_any::method_allows_medium_change
-	in disk-iso install, automatically choose and change ISO images,
-	according to their volume id and application id
-
-	* install_steps_gtk.pm, install_steps_interactive.pm: fix
-	method_allows_medium_change calls (I suck)
-	add and use install_any::method_allows_medium_change
-	in disk-iso install, automatically choose and change ISO images,
-	according to their volume id and application id
-
-	* c/stuff.xs.pl: in iso install, use ISOPATH environment variable instead
-	of loopback device filename (limited to 64 chars)
-	in disk-iso install, automatically choose and change ISO images,
-	according to their volume id and application id
-
-	* install_any.pm: in disk-iso install, strip old root from ISOPATH and
-	remove iso file from path if present
-	in iso install, use ISOPATH environment variable instead of loopback
-	device filename (limited to 64 chars)
-	add and use install_any::method_allows_medium_change
-	in disk-iso install, automatically choose and change ISO images,
-	according to their volume id and application id
-
-2004/06/18  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* install_any.pm: Don't ask a supplementary CD for upgrades
-
-2004/06/18  tsdgeos
-
-	* share/po/ca.po: typos
-
-2004/06/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakupdate_fstab: merge floppies support from MDK-10-branch
-
-	* harddrake/autoconf.pm: merge x11 autoconf support from MDK-10-branch
-
-	* authentication.pm (configure_krb5_for_AD) fix kerberos server lookup
-	(vincent guardiola)
-
-	* install_steps_newt.pm: fix comment
-
-	* standalone/service_harddrake: only stop boot progressbar if there a non
-	automatic tool to run
-	merge globetrotter support from MDK-10-branch
-	merge mouse autoreconfiguration when switching between 2.4.x and 2.6.x
-	kernels
-	from MDK-10-branch
-	merge x11 autoconf support from MDK-10-branch
-	only stop boot progressbar if there a non automatic tool to run
-
-	* install_steps_gtk.pm, do_pkgs.pm, install2.pm, install_gtk.pm: merge
-	globetrotter support from MDK-10-branch
-
-	* standalone/harddrake2: add help for new fields
-	group driver fields for sound cards
-	do not display PCI/USB vendor id in identification section
-	  - simplify item grouping
-	  - always show identification first
-	fix displaying pci/usb vendor and device id
-	display bus (PCI, USB, ...) first
-	fix help for floppies
-	  - add infrastructure in order to group fields
-	  - start to group fields for mass media, CPUs and generic PCI/USB
-	devices
-
-	* drakxtools.spec: update 10-45mdk
-	10-45mdk
-
-	* Xconfig/card.pm: merge from MDK-10-branch: add support for ATI_GLX and
-	NVIDIA_GLX cohabitation
-
-2004/06/17  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/probing.c: enlarge your scsi buffer (previous size wasn't
-	enough with more than one scsi device, fixed thanks to nplanel)
-
-	* mdk-stage1/disk.c: add disk-iso install method
-	do not delete loopbacks devices before umount but after
-
-2004/06/17  Pixel  <pixel at mandrakesoft.com>
-
-	* authentication.pm: 
-	  - AD_users_db is cn=users,ldap_domain and not
-	cn=users,dc=servername,ldap_domain
-	  - AD_user (for binddn) is user@domain instead of
-	cn=user,cn=users,ldap_domain
-	  - better system-auth krb5 configuration
-	(all this as requested by Vincent Guardiola)
-
-2004/06/17  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: Install with a supplementary CD:
-	allow to override the main compssUsers and rpmsrate
-
-2004/06/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: bump buildrequires on ldetect-devel so that tools get
-	proper module
-	information on USB devices (we should really use a shared library
-	instead ...)
-	compile everything with standard flags from rpm
-
-	* harddrake/data.pm (pciusb_id) fix duplicated USB disks (in both disk and
-	unknown categories)
-	(set_removable_configurator) fix typo preventing adding entries in
-	/etc/fstab for new removable media
-	(pciusb_id) fix duplicated USB disks (in both disk and unknown
-	categories)
-	(set_removable_configurator, set_removable_remover) use the same flags
-	as hotplug does when calling drakupdate_fstab
-	(set_removable_configurator) fix adding a removable medium
-
-	* tools/cvslog2changelog.pl: perl_checker cleanups
-
-	* standalone/drakupdate_fstab: add support for floppies
-
-	* lang.pm, ugtk2.pm: kill warnings
-
-	* standalone/service_harddrake: autoconfigure mouse when swtiching back
-	between 2.4.x and 2.6.x kernels
-
-	* standalone/harddrake2: kill warnings
-	kill usb_id like usb_vendor is (for USB mass storage media)
-	add missing field for hard disks
-	the split of the cpu help nicely show up that mice were using CPU help.
-	let's describe their "name" field too.
-	split out CPU help
-	use new infrastructure in order to not display useless floppy help for
-	SCSI
-	disks
-	add infrastructure for per class help (and add missing space around
-	brackets
-	that perl_checker did miss :-()
-	perl_checker cleanup
-
-	* install_steps_gtk.pm, install_gtk.pm: fix applying keyboard
-	configuration in globetrotter's first time wizard
-
-	* Xconfig/card.pm (install_server) remove proprietary gl libraries when
-	configuring a non
-	ATI/NVIDIA card and redo ldconfig cache accordingly
-	(to_raw_X) load non nvidia glx for all non nvidia cards, thus fixing 3D
-	on non
-	NVIDIA/ATI gfx card
-
-2004/06/15  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: redesign of the ISO image selection dialog, add an
-	entry in the list to allow to use the directory as a mirror tree
-	do not try to mount the partition in testing mode, assume it is already
-	mounted
-	del loop device after unmount
-
-	* mdk-stage1/Makefile: upgrade distrib version
-
-	* mdk-stage1/network.c: allow to go back in proxy selection window
-	fix return code handling in mirror list selection
-	fix typo spotted by John Keller
-	redesign to add "Specify the mirror manually" entries in mirror list
-	selection
-
-2004/06/15  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: rename is_same_part to are_same_partitions (not that much
-	clear, but at least a little)
-	use "find { ... }"
-
-	* Makefile: allow easy tracing of stage2
-	remove PERL_INSTALL_DEBUG code modifying install2 (unused and not
-	working anyway)
-
-	* diskdrake/hd_gtk.pm, diskdrake/interactive.pm: rename is_same_part to
-	are_same_partitions (not that much clear, but at least a little)
-
-	* keyboard.pm: the presence of loadkeys doesn't mean it is the regular
-	one. (fixes loadkeys calling itself)
-
-	* mdk-stage1/lomount.c, devices.pm: increase the number of loopbacks
-	(needed for mandrakemove where the default (8) is much too low :)
-	increase the number of loopbacks (needed for mandrakemove where the
-	default (8) is much too low :)
-
-	* install_any.pm: remove some broken sparc code
-
-	* fs.pm: 
-	  - new function subpart_from_wild_device_name()
-	  - use it
-
-2004/06/15  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: .backupignore issues (email reports), typo in
-	"other" routine
-	.backupignore issue (email reports), typo in "other" routine
-
-2004/06/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm (set_removable_configurator) switch from diskdrake to
-	drakupdate_fstab
-	(like hotplug we just automatically guess what's better)
-	update comment
-	rename usbnet as net_modules
-
-	* drakxtools.spec: fix 10-44mdk's changelog
-
-2004/06/14  jjorge
-
-	* share/po/pt.po: saraiva
-
-2004/06/14  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: rephrase question again
-	rephrase again the disk install questions (thanks to Pierre Jarillon,
-	Rapsys|Phoenix and John Kelller)
-	rephrase the partition selection message
-
-	* mdk-stage1/network.c: move mirror list functions upper
-	rename variables for extra cohesion
-	fix brown paper bug combo
-	always fill proxy fields of interfaces
-
-	* mdk-stage1/stage1.c: do not mount sysroot in testing mode
-
-2004/06/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/am.po, share/po/lt.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/fr.po, share/po/ta.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/tl.po, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/uz@Latn.po:
-	updated pot file
-
-	* pixmaps/langs/lang-ber.png: Added image for Berber language, so it is
-	available when it would be needed
-
-	* share/po/nb.po: updated Norwegian file
-	updated pot file
-
-	* share/po/nn.po: updated Nynorsk file
-	updated pot file
-
-	* share/po/cy.po: updated Welsh file
-	updated pot file
-
-2004/06/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: enforce introduction of translators hints into
-	translation catalogs
-	(perl_checker should have been loudly complain on those!!!! :-():
-	  - add missing coma caracter
-	  - move them near translations
-	note that i didn't bother check po comments that already have the proper
-	comma. instead this should be done by perl_checker which should warn
-	about po
-	comments out of translation calls and tags contexts
-	display more data about hard disks (geometry, number of primary/extended
-	partitions)
-
-	* network/netconnect.pm, standalone/drakTermServ, standalone/drakbackup,
-	ugtk2.pm: merge fixes from HEAD
-
-	* standalone/service_harddrake: do not automatically switch from nv to
-	nvidia (in order to handle
-	cases where nvidia module crashes the system)
-	merge fix from HEAD
-
-	* interactive/newt.pm (ask_fromW_real) make previous button be labeled
-	"cancel" when needed
-
-	* drakxtools.spec: 10-44mdk
-
-	* standalone/printerdrake, standalone/draksec, standalone/drakconnect:
-	enforce introduction of translators hints into translation catalogs
-	(perl_checker should have been loudly complain on those!!!! :-():
-	  - add missing coma caracter
-	  - move them near translations
-	note that i didn't bother check po comments that already have the proper
-	comma. instead this should be done by perl_checker which should warn
-	about po
-	comments out of translation calls and tags contexts
-
-	* standalone/drakperm: enable drag on drop when looking only at customized
-	settings
-
-	* harddrake/data.pm: since some hard disks are USB models, we've to
-	filtering them out once we've
-	detected them in order to prevent tem to appear in the "unknown/other"
-	category
-	ethernet card detection: only rely on driver for matching ethernet
-	cards, thus
-	preventing mislisting of other/unwanted devices (eg: bluetooth, wlan,
-	AX25).
-	last but not least, it enables us to catch
-	ldetect/ldetect-lst/detect_devices
-	bugs where some devices are *not* seen by drakx and drakconnect.
-	remove useless filtering in bridges detection code since proper
-	filtering (for
-	dobles) is already done at the upper level.
-	fix misdetection of nvidia nforce ethernet cards (broken since forcedeth
-	replaced nvnet on 2004-01-21 in MDK10's ldetect-lst)
-	merge fixes from HEAD
-
-	* standalone/draksplash: enforce introduction of translators hints into
-	translation catalogs
-	(perl_checker should have been loudly complain on those!!!! :-():
-	  - add missing coma caracter
-	  - move them near translations
-	note that i didn't bother check po comments that already have the proper
-	comma. instead this should be done by perl_checker which should warn
-	about po
-	comments out of translation calls and tags contexts
-	merge fixes from HEAD
-
-2004/06/11  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: enable MODE_TESTING if the DEBUGSTAGE1 environment
-	variable is set
-
-	* mdk-stage1/tools.c: in testing mode, try to open cmdline file in current
-	directory before trying in /proc
-
-	* mdk-stage1/disk.c: let the user choose between ISO images containing a
-	stage2 installer if a directory containing ISO images has been specified
-
-	* mdk-stage1/network.c: do not ask proxy settings if interface wasn't
-	brought up (stupid me)
-	add http proxy settings in interface_info struct, and ask them right
-	after the interface is up, so that they can be used to fetch the mirror
-	list
-
-	* mdk-stage1/network.h: add http proxy settings in interface_info struct,
-	and ask them right after the interface is up, so that they can be used
-	to fetch the mirror list
-
-2004/06/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/draksplash: merge lost hunk
-	s/_([xy])\b/_\1\1/ so that cperl-mode is happier
-	make draksplash work again...
-
-2004/06/10  Olivier Blin <oblin at mandrakesoft.com>
-
-	* standalone/drakboot: fix trainee suckiness
-
-	* mdk-stage1/config-stage1.h: use new product name (Mandrakelinux)
-
-	* mdk-stage1/mount.c, mdk-stage1/disk.c: ntfs support in install from disk
-	(on nplanel request, but to actually work, it would need the BOOT
-	kernels to include the ntfs module)
-
-2004/06/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tg.po: updated Tajik file
-
-2004/06/10  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: perl_checker compliance
-	  - hde is ide/host1/bus0/target0/lun0, and not
-	ide/host0/bus2/target0/lun0
-	  - add host in hd struct for bus ide
-
-2004/06/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: first lan step: replace the "manual choice"
-	string by the more
-	meaningfull "manually load a driver"
-	first lan step: do not compare translated strings, use format callback
-
-	* security/level.pm (get) default to standard level; else security::msec
-	won't be able to
-	load any values when level is not set (thus resulting in an empty
-	draksec GUI)
-
-	* tools/cvslog2changelog.pl: add olivier blin
-
-2004/06/09  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: in move, use stg1_info_message() instead of
-	stg1_error_message() not to disable MODE_AUTOMATIC
-	in move, use stg1_info_message() instead of stg1_error_message() not to
-	disable MODE_AUTOMATIC if not enough memory
-
-2004/06/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-	* drakxtools.spec: 10-43mdk
-
-2004/06/08  Olivier Blin <oblin at mandrakesoft.com>
-
-	* mdk-stage1/config-stage1.h: in ftp install, display a mirror list
-	(fetched from http://www.linux-mandrake.com/mirrorsfull.list) to allow
-	the user to choose the medium, the host, and automatically find the path
-	on mirror (next try, I suck Pixel said)
-
-	* mdk-stage1/network.c: in ftp install, display a mirror list (fetched
-	from http://www.linux-mandrake.com/mirrorsfull.list) to allow the user
-	to choose the medium, the host, and automatically find the path on
-	mirror
-	include missing header for uname
-	in ftp install, check that modules for the boot kernel are available in
-	mdkinst live location (they won't be used by the installer, but if they
-	aren't here, they probably won't be in the mdkinst tarball)
-
-	* mdk-stage1/url.h, mdk-stage1/url.c: list only the requested file in
-	ftp_get_filesize() instead of the whole directory (the buffer happens to
-	be too small sometimes), make this function available for other modules
-
-2004/06/08  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/monitor.pm: fix typo causing "Out of memory"
-
-	* Xconfig/card.pm, install_steps_gtk.pm, share/list.i386, pkgs.pm,
-	standalone/drakedm, install2.pm, install_steps.pm, Xconfig/main.pm,
-	Xconfig/test.pm, standalone/XFdrake, install_steps_interactive.pm:
-	switch to xorg
-
-	* authentication.pm: add "Active Directory" authentication (alpha code)
-
-	* share/rpmsrate: 
-	  - obsolete: gnome-vfs-extras xanim nist mtv gatos mokmod
-	ghostscript-utils tetex-latex-arab-doc sgml-tools
-	  ghostscript-module-SVGALIB kdenetwork-kit ApacheJServ
-	  cameleo unarj unstuff postgresql-python mercury NVIDIA_nforce*
-	  fonts-type1-baltic gnorpm
-	  - obsolete games: xtrojka bunnies xgammon xpuzzles 7colors xrally
-	gtulpas gtkgo
-	  - obsolete and the new one is auto required: MAKEDEV
-	  - xine-oss xine-xv are in xine-plugins which is required by xine-ui
-	  - gatos is no more, replacing with ati.2 (??)
-	  - replace php with php-cgi (??)
-	  - replace scanner-gui with xsane and "KDE kdegraphics-kooka"
-	  - replace clispp2c with clisp (??)
-	  - replace autoconf with autoconf2.1
-	  - replace automake with automake1.4
-	  - switch to gimp2_0
-	  - everybuddy is now ayttm
-	  - gimp-plugin is no more, but adding gimp-help
-	  - Epplets is now epplets (since a lot of time)
-	  - mandrake-galaxy is now mandrakegalaxy
-	  - prelude is now prelude-manager
-	  - kdenetwork-kmail is now kdepim-kmail (same for kdepim-korn and
-	kdepim-knode)
-	  - many XFree86-* are now xorg-x11-*, others are removed (the old
-	XFree3 servers)
-	  - libxfree86-devel is now libxorg-x11-devel
-	  - libxfree86-static-devel is now libxorg-x11-static-devel
-	  - tight-vnc-doc is now tightvnc-doc
-	  - php-manual is now php-manual-{en,fr,...}
-	  - sketch is now skencil
-	  - libgr-progs is now netpbm
-	  - MySQL-devel is now libmysqlXX-devel
-	  - replace xkobo with skobo
-	  - fix typo for xtraceroute (bad layout for flag 3D)
-	
-	  - libiw27 instead of libiw26
-	  - libhpojip0 instead of libhpojip
-
-2004/06/08  Rafael Garcia-Suarez <rgarciasuarez at mandrakesoft.com>
-
-	* share/list: A chunk of the previous patch wasn't suitable for 10.0
-	Report revisions 1.124, 1.125 and 1.126 from HEAD
-
-2004/06/08  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Bugzilla #9877 - deal with kernel ring buffer
-	that is flooded with msgs
-	for tape device detection.
-
-2004/06/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakedm: kill dead code
-
-	* tools/cvslog2changelog.pl: add rafael
-
-2004/06/08  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_gtk.pm, share/list.i386, install2.pm, standalone/XFdrake,
-	install_steps_interactive.pm: switch to xorg
-
-	* authentication.pm: add "Active Directory" authentication (alpha code)
-
-	* share/rpmsrate: 
-	  - obsolete: gnome-vfs-extras xanim nist mtv gatos mokmod
-	ghostscript-utils tetex-latex-arab-doc sgml-tools
-	  ghostscript-module-SVGALIB kdenetwork-kit ApacheJServ
-	  cameleo unarj unstuff postgresql-python mercury NVIDIA_nforce*
-	  fonts-type1-baltic gnorpm
-	  - obsolete games: xtrojka bunnies xgammon xpuzzles 7colors xrally
-	gtulpas gtkgo
-	  - obsolete and the new one is auto required: MAKEDEV
-	  - xine-oss xine-xv are in xine-plugins which is required by xine-ui
-	  - gatos is no more, replacing with ati.2 (??)
-	  - replace php with php-cgi (??)
-	  - replace scanner-gui with xsane and "KDE kdegraphics-kooka"
-	  - replace clispp2c with clisp (??)
-	  - replace autoconf with autoconf2.1
-	  - replace automake with automake1.4
-	  - switch to gimp2_0
-	  - everybuddy is now ayttm
-	  - gimp-plugin is no more, but adding gimp-help
-	  - Epplets is now epplets (since a lot of time)
-	  - mandrake-galaxy is now mandrakegalaxy
-	  - prelude is now prelude-manager
-	  - kdenetwork-kmail is now kdepim-kmail (same for kdepim-korn and
-	kdepim-knode)
-	  - many XFree86-* are now xorg-x11-*, others are removed (the old
-	XFree3 servers)
-	  - libxfree86-devel is now libxorg-x11-devel
-	  - libxfree86-static-devel is now libxorg-x11-static-devel
-	  - tight-vnc-doc is now tightvnc-doc
-	  - php-manual is now php-manual-{en,fr,...}
-	  - sketch is now skencil
-	  - libgr-progs is now netpbm
-	  - MySQL-devel is now libmysqlXX-devel
-	  - replace xkobo with skobo
-	  - fix typo for xtraceroute (bad layout for flag 3D)
-	
-	  - libiw27 instead of libiw26
-	  - libhpojip0 instead of libhpojip
-
-2004/06/08  rgarciasuarez
-
-	* share/list: Report revisions 1.124, 1.125 and 1.126 from HEAD
-
-2004/06/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/ja.po, share/po/hr.po, share/po/be.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/he.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/ltg.po, share/po/nb.po,
-	share/po/ky.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/am.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/tl.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-2004/06/07  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: nasty kernel now gives us weird
-	PIDs, so we can't rely on this to detect if we are running
-	on a live box or not. So set testing to 0
-
-	* mdk-stage1/dietlibc/lib/alloc.c: fix build with gcc 3.4 (+ little
-	cleanup)
-
-	* mouse.pm: hid is missing (and not needed) on kernel 2.6.7.0.rc2
-
-	* mdk-stage1/dietlibc/Makefile: 
-	  - fix build on gcc 3.4
-	  - much nicer detection of wether $ARCH/Makefile.add modifies CFLAGS or
-	not
-
-2004/06/04  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm: switch ONBOOT to on/off for isdn and adsl
-	connections
-
-	* network/adsl.pm: remove some FIXME comments
-
-2004/06/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/gl.po: updated Galician file
-
-2004/06/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake.sh: run harddrake service earlier
-
-	* any.pm (setupBootloader) remove debugging messages
-	(setupBootloader__entries) fix typo (Andrea Celli)
-
-2004/06/03  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/xfree.pm: add resolution 1920x1200 called WUXGA (used by Dell
-	Laptops Inspiron 8500, 8600 and Latitude D800) (bugzilla #6795)
-
-	* tools/cvslog2changelog.pl: add AUTHOR environment option for my warly
-	reports
-
-	* patch/patch-rh9-mdk10.pl: only big known bug remaining is mouse
-	configuration
-
-	* mdk-stage1/probing.c: use the same technique as ldetect for detecting
-	usb and firewire controllers (based on the pci class)
-	use the same technique as ldetect for detecting usb and firewire
-	controllers (based on the pci class)
-
-2004/06/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/de.po: updated German file
-
-2004/06/02  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: 
-	  - add descriptions for NFS and SMB (thanks to bugzilla #9940)
-	  - don't iterate on %l, better iterate on %types
-
-	* fs.pm: 
-	  - stop mounting ext3 partitions using type ext2 during install
-	  - stop fsck'ing ext3 partitions (it was only done during install, not
-	upgrade)
-
-2004/06/01  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: s#ppp/peers/adsl#ppp/peers/ppp0#
-	as we now use ifup-ppp for adsl, it will look for ppp0
-	new way to specify how to up connection for pppoe(xDSL) and others(ADSL)
-
-2004/06/01  jjorge
-
-	* share/po/pt.po: saraiva
-
-2004/06/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/am.po: updated Amharic file
-
-	* share/po/nb.po: updated Norwegian po file
-
-2004/06/01  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/drakboot: rollback weird and ugly workaround when pressing
-	cancel on the ask_warn. The real fix is in ugtk2.pm
-
-	* any.pm: handle the nfs/smb service disabled (enhancement given by
-	Olivier Blin)
-
-	* ugtk2.pm: when wizcancel occurs, ugtk2 object is not destroyed (the
-	garbage collector seems to have some pbs taking care of this, but since
-	many callbacks using it are registered, it's no wonder)
-	(fixes pressing "Cancel" on a ->ask_warn in wizard mode)
-	(set_text): fix "cleanups"
-
-2004/06/01  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Really apply gui fix.
-	Use array rather than hash per Thierry.
-	Insure ftp transfers are binary, fix gui problem (in 10.0 update also).
-	Binary ftp/gui fixes from cooker branch.
-
-	* standalone/drakTermServ: Use array rather than hash per Thierry.
-	Insure ftp transfers are binary, fix gui problem (in 10.0 update also).
-
-2004/06/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/tools.pm: remove debug message
-	(use_windows) space cleanup
-
-	* ugtk2.pm (set_text) cleanups
-
-	* network/netconnect.pm: make LAN wizard more user friendly: move "manual
-	choice" after detected
-	interfaces
-
-	* standalone/drakboot (lilo_choice) fix error title
-	fix "two windows after exception" bug
-
-	* network/drakfirewall.pm: mark it as translatable for non alphabetic
-	languages
-
-	* drakxtools.spec: 10-42mdk
-
-	* bootloader.pm (write_grub_config) do not write partial config file (thus
-	garbaging previous
-	config) if an error occured
-
-	* detect_devices.pm (getNet) handle interface w/o ip addresses
-	(getNet) rollbacl to MDK10.0 detection scheme
-
-2004/05/28  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Typo in tape restore (Federico Belvisi).
-
-2004/05/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm (real_main) fix protocol switching from manual to
-	auto when stepping back
-	merge brown paper bug fix from TRUNK
-
-	* network/ethernet.pm (get_eth_cards) fallback on sysfs in order to get
-	driver and card
-	description when ethtool is not supported (eg: ipw2100 driver for
-	intel centrino)
-	merge from HEAD:
-	(get_eth_cards) fallback on sysfs in order to get
-	driver and card description when ethtool is not supported (eg: ipw2100
-	driver for intel centrino)
-	merge fixes from HEAD
-
-	* keyboard.pm, any.pm, c/stuff.xs.pl, standalone/drakTermServ,
-	standalone/net_monitor, network/drakfirewall.pm, authentication.pm,
-	detect_devices.pm: merge fixes from HEAD
-
-	* standalone/drakbackup: merge fix from TRUNK
-	merge fixes from HEAD
-
-	* network/network.pm (read_all_conf) read VLAN interfaces too
-	(read_all_conf) read ip aliased interfaces too
-
-	* drakxtools.spec: update 10-41mdk's changelog
-	10-41mdk
-	10-40mdk
-	fix 10-37mdk's indentation
-	fix perl Glib/Gtk2 binding requires for mdk10.0
-	fix 10-34.2mdk changelog indentation
-	update 10-34.2mdk's changelog
-	update 10-34.2mdk's changelog
-	merge fixes from HEAD
-
-2004/05/27  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: 
-	  - drop old internet service code
-	  - only one way to configure/up/down an adsl connection
-
-	* network/netconnect.pm: 
-	  - call remove_initscript because internet service is dropped
-	  - drop write_initscript call
-
-	* network/tools.pm: 
-	  - kill write_initscript
-	  - add remove_initscript
-
-2004/05/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/am.po: Added Amharic file
-
-2004/05/27  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: new function isTrueLocalFS() to make a distinction between
-	ext3/reiserfs/... and nfs
-	=> allow /home on nfs (bugzilla #7460)
-	new function isTrueLocalFS() to make a distinction between
-	ext3/reiserfs/... and nfs
-	=> allow /home on nfs (bugzilla #7460)
-
-	* fsedit.pm, install_interactive.pm, partition_table.pm: new function
-	isTrueLocalFS() to make a distinction between ext3/reiserfs/... and nfs
-	=> allow /home on nfs (bugzilla #7460)
-
-	* Xconfig/card.pm, install2.pm, install_steps.pm, install_any.pm,
-	install_steps_interactive.pm: handle freeDriver which disable using
-	proprietary X driver (esp. for nvidia)
-
-	* any.pm: really chkconfig --add and --del for "diskdrake --fileshare"
-	(thanks to Olivier Blin)
-	instead of removing package nfs-utils or samba-server (when "diskdrake
-	--fileshare" disables a export kind) (bugzilla #9804)
-
-2004/05/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getNet) ignore loopback device
-
-	* standalone/net_monitor (get_val) reuse c::get_netdevices() and thus skip
-	bogus sit0
-
-	* drakxtools.spec: 10-39mdk
-	10-38mdk
-
-2004/05/26  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* docs/HACKING: 
-	  - perl-XML-Parser is needed at build stage
-
-2004/05/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tl.po: updated Filipino file
-
-	* keyboard.pm, share/rpmsrate, lang.pm: enabled Latgalian language choice;
-	prepared for Sardian;
-	rpmsrate: Japanese input method is now "uim"
-
-2004/05/26  Pixel  <pixel at mandrakesoft.com>
-
-	* common.pm, crypto.pm, install_any.pm: /etc/mandrake-release is now
-	/etc/mandrakelinux-release
-
-	* lang.pm: 
-	  - call handleI18NClp() ASAP
-	  - create and use lang2move_clp_name()
-
-	* install2.pm: "expert" flag in stage2 is bad and deprecated, removing it!
-
-2004/05/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getNet) reuse c::get_netdevices()
-	(getNet) support br (bridging) and tr (UML) interfaces (florin)
-
-	* c/stuff.xs.pl (netdevices) introduce it in order to list network
-	interfaces
-
-2004/05/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tg.po, share/po/eu.po: updated Basque and Tajik files
-
-	* share/keyboards.tar.bz2: new keyboards; new lang->keyboard
-	correspondences
-
-	* keyboard.pm: Nepali uses devanagari script
-	new keyboards; new lang->keyboard correspondences
-	don't trust the USB keyboard layout announc when it claims to be "us"
-	layout (mosdt manufacturers just keep that default value while seeling
-	different layouts)
-
-2004/05/25  rvojta
-
-	* network/drakfirewall.pm: 
-	  - BitTorrent support added
-
-2004/05/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: update 10-37mdk's changelog
-	10-37mdk
-
-	* network/ethernet.pm (mapIntfToDevice) only try to lookup pci or usb
-	device by bus location
-	if its location is defined (some driver are returning bogus data on
-	ETHTOOL_GDRVINFO command)
-	(get_eth_cards) brown paper bug: fix card name lookup when driver does
-	not support GDRVINFO command from ETHTOOL ioctl and there's only one
-	card managed by this driver
-
-	* share/po/br.po: update
-
-2004/05/24  rgarciasuarez
-
-	* share/list: Don't hardcode architecture
-
-2004/05/24  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix dropped .txt files when running mkisofs.
-	(Anthill #799)
-
-2004/05/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/draksplash (mk_frame) minor cleanup
-	switch from deprecated OptionMenu into new ComboBox widget
-
-	* share/po/br.po: typo fix
-
-	* drakxtools.spec: 10-36mdk
-
-	* standalone/drakperm, standalone/drakbug, interactive/gtk.pm,
-	standalone/drakboot, standalone/draksec, standalone/drakfloppy,
-	standalone/drakTermServ, Xconfig/resolution_and_depth.pm,
-	standalone/drakbackup: switch from deprecated OptionMenu into new
-	ComboBox widget
-
-	* standalone/drakconnect: switch from deprecated OptionMenu into new
-	ComboBox widget
-	(build_notebook) simplify pull down menu filling and do not duplicate
-	protocols
-	list
-
-	* ugtk2.pm: still provide compat stuff for OptionMenu (#9826) until all
-	tools are
-	converted
-
-2004/05/21  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakTermServ: Some new perl_checker
-	fixes.
-
-2004/05/20  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Add /etc/modprobe* mount points for client
-	hardware config.
-
-2004/05/19  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* share/list: 
-	  - Share pango modules between the FT2 and Xft backend (named fc in
-	pango 1.4)
-	  - pango-modules file is now located in /etc/pango/i386/
-	  - Add Build.pm
-
-2004/05/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* c/stuff.xs.pl (hasNetDevice, isNetDeviceWirelessAware, getNetDriver)
-	explicitely use
-	system IFNAMSIZ instead of implicitely defining it
-	(isNetDeviceWirelessAware) introduce it in order to detect whether a
-	network interface support wireless extensions or not
-	forward better LAN vs wireless filtering
-
-	* network/adsl.pm: forward speedtouch fix (using kernel mode)
-
-	* network/netconnect.pm: filter LAN and Wireless cards by explicitely
-	checking whether network
-	interfaces support wireless extensions or not instead of relying on
-	both ethtool support (in order to get the module name) and checking
-	against a whitelist of known wireless awere cards
-	forward speedtouch fix (using kernel mode)
-	forward better LAN vs wireless filtering
-
-	* drakxtools.spec: 10-35mdk
-
-2004/05/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/ky.po, share/po/es.po, share/po/pl.po: updated
-	Kyrgyz and Welsh files
-
-2004/05/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (Gtk2::OptionMenu->new) kill debug message
-	(Gtk2::OptionMenu) transparently replace obsolete OptionMenu widget by
-	the new ComboBox widget
-
-2004/05/17  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm: perl_checker compliance
-	remove speedtouch and ISDN 'only working under 2.4 kernel' warnings
-
-2004/05/17  Pixel  <pixel at mandrakesoft.com>
-
-	* authentication.pm: install autofs for nis authentication (dixit florin &
-	fcrozat)
-
-	* Xconfig/xfree.pm: restore the ability to specify the file where the
-	config should be written (since it's used by Xconfig/test.pm)
-
-	* Makefile: instead of keeping stage1 (mostly as temporary space but with
-	a fixed size, and for the background init),
-	exit the stage1 giving hand to stage2 in a tmpfs (same as what was done
-	for Mandrakemove)
-	stage2 now builds the full mdkinst, and full_stage2 is stage2 + building
-	mdkinst_stage2
-
-2004/05/17  rgarciasuarez
-
-	* tools/Makefile: Clean up perl version checking in the tools makefile.
-
-	* Makefile: Remove an obsolete check for XFree86-VGA16
-
-	* share/list: Fix version of PerlIO::gzip in file list
-
-2004/05/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/icons/drakconnect_step.png: kill unused image
-
-	* share/po/br.po: update
-
-2004/05/16  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Fixes
-
-2004/05/16  yrahal
-
-	* share/po/ar.po: Arabic translation
-
-2004/05/15  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Upadted Spanish messages
-
-2004/05/14  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: Fixes to use speedtouch kernel driver / drop userspace
-	one
-	(happy modem with both 2.4 and 2.6)
-	  - fix modem_run parameters to use kernel driver
-	  - change/move pty declaration in /etc/ppp/peers/adsl
-	  - plugin pppoatm has to be set and vpi.vci too
-	  - new net_cnx_{up/down}, speedtouch.sh seems to be useless now
-
-2004/05/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sl.po, share/po/ky.po, share/po/hi.po: fixed "default:LTR"
-	string
-
-	* share/po/et.po, share/po/pt_BR.po: updated Estonian and Brazilian files
-
-2004/05/13  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: in manualFstab coming from auto_install.cfg, allow device
-	/dev/XXX instead of simply XXX
-	instead of keeping stage1 (mostly as temporary space but with a fixed
-	size, and for the background init),
-	exit the stage1 giving hand to stage2 in a tmpfs (same as what was done
-	for Mandrakemove)
-
-	* mdk-stage1/probing.c: usb cdrom has a weird size in /proc/partitions,
-	the result is that it is detected as floppy
-	usb cdrom has a weird size in /proc/partitions, the result is that it is
-	detected as floppy
-
-	* c/stuff.xs.pl, diskdrake/interactive.pm, fs.pm, fsedit.pm,
-	standalone/drakupdate_fstab: really handle LABEL=XXX in fstab (as used
-	by redhat) (no xfs labels yet)
-
-	* mdk-stage1/Makefile, mdk-stage1/disk.c, mdk-stage1/tools.h,
-	mdk-stage1/log.c, mdk-stage1/adsl.c, Makefile, mdk-stage1/cdrom.c,
-	share/devices, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/.cvsignore, share/symlinks,
-	mdk-stage1/stage1.c, mdk-stage1/init.c, mdk-stage1/dhcp.c,
-	mdk-stage1/network.c: instead of keeping stage1 (mostly as temporary
-	space but with a fixed size, and for the background init),
-	exit the stage1 giving hand to stage2 in a tmpfs (same as what was done
-	for Mandrakemove)
-
-	* ugtk2.pm: better error logging when gtkcreate_img or gtkcreate_pixbuf
-	can't find the image
-
-	* Xconfig/resolution_and_depth.pm: simplify
-	Xconfig::resolution_and_depth::allowed(): adapt it to the way it's
-	really used
-	$prefered_depth defaults to the greatest depths, no need to set it to 24
-	vmware doesn't like 24bpp (bugzilla #9755)
-
-	* Xconfig/monitor.pm: speed-up monitor choosing dialog when {VendorName}
-	is undef (esp. when using "use diagnostics")
-
-2004/05/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/advertising/dwd-07.pl: unified two strings
-
-	* share/po/et.po: updated Estonian file
-
-	* share/po/be.po: updated po file
-
-2004/05/12  Pixel  <pixel at mandrakesoft.com>
-
-	* keyboard.pm, install_steps_interactive.pm: fix typo
-
-	* lang.pm: no lang-ltg.png, so disabling ltg
-	  - fix typo
-	  - fix last commit which was not using $locale_country as it should in
-	system_locales_to_ourlocale()
-
-	* Makefile: use busybox when dont_run_directly_stage2
-
-	* install_any.pm: fix selecting locales-LANG (it didn't really work, but
-	it doesn't seem needed?)
-
-2004/05/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/ky.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-2004/05/11  Pixel  <pixel at mandrakesoft.com>
-
-	* authentication.pm: fix winbind configuration and do the same for LDAP
-	and NIS (modifs proposed and checked by Vincent Guardiola)
-
-	* mdk-stage1/stage1.c: adapt copyright
-
-	* lang.pm: 
-	  - new function locale_to_main_locale() to replace the typical
-	substr($lang, 0, 2) or $lang =~ /(..)/
-	  - new function analyse_locale_name() to replace various regexps on
-	locale name
-	  - use those 2 functions for cleanup
-	  - cleanup even more standard_locale()
-	perl_checker compliance
-	remove unused function
-
-	* drakxtools.spec: new update:
-	  - fix pam configuration when using winbind (also fixes LDAP and NIS
-	(?))
-
-	* detect_devices.pm: rewrite a little probeSerialDevices(), the beginning
-	is still very strange
-
-	* Xconfig/test.pm: fix typo
-
-	* printer/main.pm, install_steps.pm, keyboard.pm: use
-	lang::analyse_locale_name() and lang::analyse_locale_name()
-
-	* http.pm, Xconfig/card.pm, printer/detect.pm, wizards.pm,
-	interactive/newt.pm, network/netconnect.pm, mouse.pm, install2.pm,
-	.perl_checker: perl_checker compliance
-
-	* ugtk2.pm: perl_checker compliance
-	better error logging when gtkcreate_img or gtkcreate_pixbuf can't find
-	the image
-
-	* any.pm: use lang::analyse_locale_name() and lang::analyse_locale_name()
-	more cleanup in selectLanguage()
-	selectLanguage():
-	  - simplify @langs generation
-	  - use a tree if @langs > 15, not when $::move is set
-
-	* install_steps_interactive.pm: use lang::analyse_locale_name() and
-	lang::analyse_locale_name()
-	fix ugly typo (thanks to perl_checker)
-
-	* install_any.pm: fix selecting locales-LANG (i didn't really work, but it
-	doesn't seem needed?)
-
-2004/05/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-
-	* harddrake/data.pm: do not run XFdrake in automatic mode, it's useless
-
-2004/05/10  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/man/C/man5/drakbackup.conf.5: Man page for drakbackup.conf.
-
-2004/05/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update breton translation
-
-2004/05/08  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated partially
-
-2004/05/08  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/diskdrake: perl_checker compliance
-
-2004/05/08  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/scannerdrake: Fixed firmware installation.
-
-2004/05/07  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/main.pm: remove debugging code
-	you can now configure monitors on heads > 1
-	fix an old typo
-
-	* Xconfig/various.pm, Xconfig/resolution_and_depth.pm, Xconfig/xfree.pm:
-	you can now configure monitors on heads > 1
-
-	* Xconfig/monitor.pm: you can now configure monitors on heads > 1
-	rename monitors() and $monitors to monitors_db() and $monitors_db
-	(preparation for next commit which adds ability to configure each
-	monitor)
-
-2004/05/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakclock: do saner check for ntp package (Robert Vojta)
-
-2004/05/06  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm, standalone/drakupdate_fstab: don't prefer_devfs_name when reading
-	/proc/mounts (which uses devfs names)
-
-	* Xconfig/card.pm: don't succeed automatic configuration (not
-	auto_install) when there is many cards (as requested by Joe Bolin on
-	cooker)
-
-2004/05/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-
-2004/05/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: preparing for Furlan
-
-	* share/po/gl.po: updated Galician file
-
-2004/05/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: fix 10-31mdk's changelog
-
-	* network/drakfirewall.pm: open more ports for samba
-
-	* network/netconnect.pm: do not offer to set DOMAINNAME2 since it is never
-	saved nor read (#9580)
-
-2004/05/04  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/ethernet.pm: use @cards instead of $#cards as told by master
-	pipi
-	perl_checker fixes
-
-	* network/netconnect.pm: perlchecker fixes
-
-2004/05/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-34mdk
-
-	* standalone/drakconnect: fix interface destruction wizard
-
-	* share/po/de.po: update
-
-2004/05/03  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm, network/isdn.pm: take ISDN protocol into account
-	for people outside Europe to use it
-	(kind of lost in space before)
-
-2004/05/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/de.po: updated German file
-
-2004/05/03  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: no need for defensive programming
-	blank.img has been removed, so remove special code handling it
-
-	* docs/README: quick update, not complete
-
-	* mdk-stage1/modules.c, install_steps_interactive.pm, install2.pm,
-	modules.pm, mdk-stage1/stage1.c: blank.img has been removed, so remove
-	special code handling it
-
-	* Xconfig/xfree3.pm, Xconfig/various.pm, Xconfig/card.pm,
-	Xconfig/resolution_and_depth.pm, Xconfig/xfree.pm, Xconfig/test.pm,
-	Xconfig/xfreeX.pm, mouse.pm, Xconfig/xfree4.pm, standalone.pm,
-	Xconfig/default.pm, Xconfig/main.pm, Xconfig/screen.pm, Xconfig/FILES:
-	XFree 3 is gone!
-
-	* mdk-stage1/Makefile: stage1-disk and stage1-medias-usb are dead already
-
-2004/05/01  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm, standalone/drakupdate_fstab, diskdrake/interactive.pm, fsedit.pm:
-	fix drakupdate_fstab adding twice an entry in fstab, one with the old
-	name, one with the devfs name
-
-2004/04/30  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm, any.pm, devices.pm: 
-	  - new getSCSI_26() not using /proc/scsi/scsi
-	(since we can't say first Direct-Access entry is sda anymore)
-	  - deprecate field {raw_type}
-	  - don't fill {device} with sgX for non-(cdrom|hd|floppy)
-	  (hopefully not used by anything, except maybe scanners?)
-	  - replace scdX with srX (which everybody use)
-
-2004/04/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone.pm (version) bump release number
-
-	* standalone/drakclock: time is displayed as HH:MM:SS with RTL languages
-
-	* drakxtools.spec: 10-32mdk
-
-	* harddrake/data.pm: list SATA controllers in their own category (anthill
-	#741)
-
-2004/04/28  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/isdn.pm: cleaning _last_ 'isdn_' prefix
-	drop unused ISA and EXPORT
-	drop isdn_ fonction names
-
-	* network/netconnect.pm: drop isdn_ fonction names
-	drop network::isdn->import
-
-	* harddrake/data.pm: change last isdn_detect_backend() remaining
-
-	* standalone/drakconnect: drop isdn_ fonction names
-
-2004/04/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ky.po: updated Kyrgyz file
-
-	* share/po/nn.po: Updated Nynorsk file
-
-2004/04/28  tsdgeos
-
-	* share/po/ca.po: updating catalan translations of DrakX and drakfax
-
-2004/04/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-	* standalone/service_harddrake: log removed/added hw
-
-2004/04/27  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/isdn.pm: no need to up ippp0 in net_cnx_up, it's been up'ed at
-	startup
-
-	* standalone/drakconnect: more gui layout fixes
-
-	* network/netconnect.pm, network/tools.pm: try to fix #3793 or at least
-	enhance firmware seeking on windows partition
-	(based upon titi's patch)
-
-2004/04/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/de.po, share/po/pt_BR.po: updated Brazilian file
-
-2004/04/27  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/XFdrake: not needed for Lacie, so removing
-
-	* diskdrake/removable.pm, diskdrake/interactive.pm: revert handling --auto
-	for removable, it is much better done in a separate function
-	(the goal of this --auto is not clear at all, and is better explicitly
-	done)
-
-2004/04/27  yrahal
-
-	* share/po/ar.po: Arabeyes' Arabic translation
-
-2004/04/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/de.po: updated German translations
-
-2004/04/26  Pixel  <pixel at mandrakesoft.com>
-
-	* run_program.pm: create ~/tmp when needed
-
-	* mdk-stage1/stage1.c, mdk-stage1/config-stage1.h: rename MandrakeMove to
-	Mandrakemove
-
-	* lang.pm: utf8_should_be_needed() must return true if any of the
-	languages chosen is utf8, not only the main one
-	(it also returns true when there are many charsets)
-
-2004/04/25  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/04/25  yrahal
-
-	* share/po/ar.po: Arabeyes.org's Arabic translation
-
-2004/04/24  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/04/23  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: re-indentation
-	use gtkset_border_width(Gtk2::VBox->new, 5) to create a vbox and set a
-	border_width at the same time
-	change packing to get a better GUI
-
-	* ugtk2.pm: create frame with a border witdth (titi rulez)
-
-2004/04/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nn.po: updated Nynorsk file
-
-	* share/po/gl.po: updated Galician files
-
-2004/04/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (shrink_topwindow) support both 10.0 and cooker
-
-	* standalone/drakconnect: remove useless ::prefix references
-	(build_notebook) sort ppp auth methods
-
-	* drakxtools.spec: 10-32mdk
-
-	* standalone/service_harddrake: do automatic sound configuration (one can
-	still switch between OSS and
-	ALSA through mcc)
-	handle again timeouts
-	do X11 configuration automagically
-	  - when automatic flag is set for one hardware class, do not ask for
-	confirmation and just do what is needed
-	  - only show "probing in progress" message if we did run an interactive
-	  tool
-
-	* modules.pm (probe_category) perl_checker cleanup
-	(remove_alias, remove_alias_regexp, remove_alias_regexp_byname,
-	remove_module, set_options) add more explanations
-
-	* harddrake/data.pm: do X11 configuration automagically
-	(set_removable_configurator) use diskdrake instead of drakupdate_fstab
-	for removable media in automatic mode
-	set automatic flag for removable media
-
-	* diskdrake/interactive.pm, diskdrake/removable.pm: handle --auto when
-	managing removable media
-
-	* Xconfig/various.pm, standalone/XFdrake: handle --auto
-
-2004/04/22  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* modules.pm: fix 'somewhat' broken isdn type and driver name fetching
-	from pcitable
-	(this is no paper-bag)
-
-2004/04/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sl.po: updated Slovanian file
-
-2004/04/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake, standalone/harddrake2: switch to new
-	harddrake data structure
-
-	* install_steps_interactive.pm (summary) install alsaconf too for isapnp
-	sound cards (it better handle some
-	isapnp sound cards)
-
-	* standalone/drakxtv: fix tv cards detection
-
-	* harddrake/data.pm: split usb ports from usb controllers (arnaud request)
-	new harddrake data structure (easier to extend)
-
-	* harddrake/v4l.pm: sync tuners list with 2.6.6-rc2 too
-	sync card lists with 2.6.6-rc2
-
-2004/04/20  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: move reread_net_conf to tools.pm
-	remove unneeded @all_cards initialisation in reread_net_conf
-
-	* network/tools.pm: move reread_net_conf to tools.pm
-
-2004/04/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect (populate_notebook) fix drakxtools' build
-	(build_notebook) do not assume there's not language that want to
-	translate the "dhcp" string as in other code
-
-	* drakxtools.spec: 10-31mdk
-
-2004/04/19  dam's  <dams at idm.fr>
-
-	* standalone/drakfont: attempt to correct bug #9423
-
-2004/04/19  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: $adsl_modem is optional, moved to $o_adsl_modem
-
-	* standalone/drakconnect: dropped $::i in foreach loop, use $i instead
-	  - translate strings once and only for the user.
-	don't bother with translated strings internally..
-	  - drop DHCP translation, it's always DHCP
-	IPADDR, NETMASK and GATEWAY fields are not sensitive by default in DHCP
-	(broken by #8498 fix)
-
-2004/04/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/nb.po: updated Welsh and Norwegian files
-
-2004/04/19  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Consolidate button_box* code, remaining
-	file_dialogs.
-
-2004/04/18  tsdgeos
-
-	* share/po/ca.po: Unfuzzying and updating
-
-2004/04/18  yrahal
-
-	* share/po/ar.po: Arabic translation (Arabeyes.org)
-
-2004/04/16  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Some drives don't return "ATIP info from disk".
-
-2004/04/11  yrahal
-
-	* share/po/ar.po: Arabic translation
-
-2004/04/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/uk.po: updated Ukrainian and Welsh files
-
-	* share/po/nn.po, share/po/tl.po: updated Nynorsk and Filipino files
-
-	* share/po/hi.po, share/po/eu.po: corrected default:LTR entries
-
-2004/04/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_steps.pm, lang.pm (lang::write_langs) drop prefix parameter
-
-2004/04/08  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakclock: 
-	  - test /etc/init.d/ntpd instead of /etc/ntp.conf for ntp installation
-
-2004/04/08  keld
-
-	* share/po/da.po: updates
-	soft/mdkonline/po/da.po soft/wizard_perl/po/da.po
-	gi/perl-install/share/po/da.po
-
-2004/04/08  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: mount /sys before move::init() since move::init() needs it
-
-	* mdk-stage1/lomount.c: 
-	  - no need for chloop device anymore, my kernel patch applies directly
-	on the default loop module :)
-	  - gzloop needs cryptoloop and zlib_inflate (why must i handle this by
-	hand? is my gzloop ugly?...)
-
-	* devices.pm: get rid of the chloop code (not used anymore)
-
-2004/04/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: bump glib/gtk+ perl binding requires
-	use Mandrakelinux now
-	10-30mdk
-
-2004/04/07  dam's  <dams at idm.fr>
-
-	* standalone/drakups: corrected drakups against new libconf 0.32
-
-2004/04/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: defined default font to use in KDE for devanagari and malayalam
-	scripts
-
-2004/04/06  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/list-pwp, share/advertising/list-dwd,
-	share/advertising/list-dis, share/advertising/list-ppp: Don't display
-	commercial advertisement in development version
-
-2004/04/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ky.po, share/po/eu.po: Added Kyrgyz file; updated Basque file
-
-2004/04/06  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Use a scalar with cat_ (Pixel suggestion).
-	Don't move existing dhcpd.conf, add an include for terminal-server
-	instead.
-
-2004/04/06  tbacklund
-
-	* share/po/fi.po: fully translated, was 3 fuzzy, 3 untranslated
-
-2004/04/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (shrink_topwindow) fix faillure with perl-Gtk+-1.04x (#9411)
-
-	* install_steps_interactive.pm: typo fix
-
-2004/04/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hi.po: updated Hindi file
-
-2004/04/05  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: allow mounting type devpts
-	perl now handle cleanly utf8 string in exceptions, no need to die
-	\N("...")
-
-	* loopback.pm, diskdrake/hd_gtk.pm, diskdrake/interactive.pm, lvm.pm,
-	install2.pm, fsedit.pm, network/drakfirewall.pm, authentication.pm,
-	install_steps.pm, raid.pm, bootloader.pm, swap.pm, install_any.pm,
-	install_interactive.pm, partition_table/raw.pm, partition_table.pm,
-	install_steps_interactive.pm: perl now handle cleanly utf8 string in
-	exceptions, no need to die \N("...")
-
-2004/04/05  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Remove config-info (new home to be man page).
-	Use ugtk2 cursor wait/normal (share the wheel).
-	Combine/rework restore code.
-
-2004/04/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_any.pm (setDefaultPackages) despite find and any are
-	semantically equivalent
-	in this context, any will be used there (boolean vs scalar context)
-	(setDefaultPackages) install alsa-utils if *any* of the present sound
-	card is driven by ALSA
-
-	* standalone/service_harddrake: log nv<=>nvidia switches
-
-	* share/rpmsrate: install gnome-alsamixer and alsa-utils when there's an
-	alsa driver sound card
-	setDefaultPackages
-	im-ja has been reported to be more user-friendly than uim
-
-2004/04/04  keld
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-
-2004/04/04  yrahal
-
-	* share/po/ar.po: Commmitting Arabeyes.org's Arabic translation of the
-	week
-
-2004/04/02  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/04/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/nb.po: updated Farsi and Norwegian files
-
-2004/04/02  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/Makefile: clean init-move when cleaning
-
-	* mdk-stage1/nfsmount.c: enable nfs install on old i586 machines (or maybe
-	poor network cards) (bugzilla #9322) (thanks to Michael Riss)
-
-2004/04/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-
-2004/04/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/gl.po, share/po/pt_BR.po, share/po/th.po,
-	share/po/et.po, share/po/ja.po, share/po/be.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/sl.po, share/po/nn.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/uk.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/tl.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* share/po/sk.po, share/po/hr.po, share/po/fi.po, share/po/br.po,
-	share/po/mn.po, share/po/ta.po, share/po/eo.po: updated Mongol files
-	updated pot file
-
-2004/04/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: move harddrake service confirmation script from spec
-	file into its own file
-
-	* Makefile.config: list service_harddrake_confirm too
-
-	* ugtk2.pm: space cleanup
-
-	* standalone/service_harddrake_confirm: pass timeout parameter too
-	move harddrake service confirmation script from spec file into its own
-	file
-
-	* standalone/service_harddrake: let execl() handle the arg array (this is
-	safer)
-	pass timeout parameter too
-	enable to translate a few more messages
-	translate "XYZ was added/removed" messages
-
-2004/03/31  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: typo fix
-
-	* drakxtools.spec: fix drakxtools postuninstall script
-
-2004/03/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* pixmaps/langs/lang-ltg.png, lang.pm: Added missing choice for Latgalian
-	(it had been forgotten when adding the
-	10.0 new languages)
-
-2004/03/30  Pixel  <pixel at mandrakesoft.com>
-
-	* rescue/list: add /sbin/badblocks
-
-	* ugtk2.pm: fix relative file names (mostly (only?) for debugging)
-
-2004/03/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	update
-	update
-
-	* any.pm: share translation with help.pm
-
-	* share/po/fr.po: fix inverted translations (#8217)
-
-2004/03/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hi.po: corrected default:LTR entries
-
-	* share/po/it.po: corrected default:LTR entries
-	updated Italian file
-
-2004/03/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake: space "fix"
-	typo fix
-	only alter xfree config if we found an nvidia card
-	try several locations
-	check for compressed nvidia modules too
-	typo fix
-
-	* drakxtools.spec: 10-29mdk
-	10-28mdk
-
-	* share/po/fr.po: typo fix
-	update
-
-2004/03/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hi.po: corrected default:LTR entries
-
-	* share/po/it.po: corrected default:LTR entries
-	updated Italian file
-
-2004/03/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-28mdk
-
-	* share/po/fr.po: update
-
-	* standalone/service_harddrake: try several locations
-	check for compressed nvidia modules too
-	typo fix
-
-2004/03/28  yrahal
-
-	* share/po/ar.po: Arabeyes.org's translation
-
-2004/03/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: s/bcm4400/b44/
-
-	* network/adsl.pm (adsl_probe_info) fix vpi, vci rereading (speedtouch
-	conf write hexa...)
-
-	* drakxtools.spec: fix changelog
-
-	* pkgs.pm (installTransactionClosure) fix list refreshing (warly)
-
-2004/03/26  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add SMP and BIGMEM for kernel-2.4
-	  - aggregate all the kernel-2.4 in one occurence not to raised
-	the "complicated tags" error in install rpmsrate parsing code
-
-2004/03/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_probe_info) fix vpi, vci rereading (speedtouch
-	conf write hexa...)
-	misc space cleanups (thx perl_checko)
-	(adsl_probe_info) fix "manage interface" that broke speedtouch
-	configuration
-
-	* network/netconnect.pm: s/bcm4400/b44/
-	warn than speedtouch only works with 2.4.x kernels for now
-
-	* bootloader.pm (method_choices) blacklist again Savage, they're broken
-	again :-(
-
-	* drakxtools.spec: 10-27mdk
-
-2004/03/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_probe_info) fix "manage interface" that broke
-	speedtouch configuration
-
-	* network/netconnect.pm: warn than speedtouch only works with 2.4.x
-	kernels for now
-	bcm4400 is known to not support ETHTOOL
-
-	* bootloader.pm (method_choices) blacklist again Savage, they're broken
-	again :-(
-
-	* drakxtools.spec: 10-27mdk
-
-	* share/rpmsrate: speedtouch support is definitvely buggy with 2.6.x
-	kernel for now
-
-2004/03/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: bcm4400 is known to not support ETHTOOL
-
-	* share/rpmsrate: speedtouch support is definitvely buggy with 2.6.x
-	kernel for now
-
-2004/03/25  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/03/25  Warly  <warly at mandrakesoft.com>
-
-	* share/compssUsers.server: s/PHPgroupware/Kolab server/
-
-2004/03/24  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: 
-	  - preferring "p3-smp-64GB" first (for BIGMEM + SMP)
-	  - also adding i686-up-4GB
-	  - cleanup code
-	fix extension parsing (vmlinuz-2.6.3-7mdksmp &
-	vmlinuz-2.6.3-7mdkenterprise vs vmlinuz-2.6.3-7mdk-p3-smp-64GB &
-	vmlinuz-2.6.3-7mdk-i686-up-4GB)
-	sorting based on @prefered is nearly unused, remove it
-
-2004/03/24  tsdgeos
-
-	* share/po/ca.po: Unfuzzying
-
-2004/03/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/isdn.pm (isdn_write_config_backend) load ISDN driver
-	up ippp0 interface and delete previous default route
-	(isdn_detect_backend) do not try to get "type" field here, we just have
-	nothing
-	to guess it there
-	(isdn_read_config) do not overwrite current parameters with undefed ones
-
-	* network/netconnect.pm: fix ISDN modem selection
-
-	* modules.pm (probe_category) set ISDN hisax driver type parameter
-
-2004/03/24  Pixel  <pixel at mandrakesoft.com>
-
-	* share/rpmsrate: when BIGMEM & SMP, use kernel-p3-smp-64GB
-
-	* bootloader.pm: 
-	  - preferring "p3-smp-64GB" first (for BIGMEM + SMP)
-	  - also adding i686-up-4GB
-	  - cleanup code
-	fix extension parsing (vmlinuz-2.6.3-7mdksmp &
-	vmlinuz-2.6.3-7mdkenterprise vs vmlinuz-2.6.3-7mdk-p3-smp-64GB &
-	vmlinuz-2.6.3-7mdk-i686-up-4GB)
-	sorting based on @prefered is nearly unused, remove it
-
-2004/03/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/isdn.pm (isdn_write_config_backend) load ISDN driver
-	up ippp0 interface and delete previous default route
-	(isdn_detect_backend) do not try to get "type" field here, we just have
-	nothing
-	to guess it there
-	(isdn_read_config) do not overwrite current parameters with undefed ones
-
-	* network/netconnect.pm: fix ISDN modem selection
-
-	* modules.pm (probe_category) set ISDN hisax driver type parameter
-
-	* network/adsl_consts.pm: #5056 really refered to austria, not australia
-
-2004/03/24  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Update translations
-
-	* share/rpmsrate: Install kdeutils-kwalletmanager by default when KDE is
-	installed
-
-2004/03/24  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_gtk.pm: meta_class server (PowerPack+) needs category
-	Workstation
-
-	* share/rpmsrate: when BIGMEM & SMP, use kernel-p3-smp-64GB
-
-2004/03/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_conf_backend) only disable kernel driver for 2.4.x
-	kernels since
-	latest speedtouch package is totally broken in userland mode now :-(
-
-	* drakxtools.spec: fix changelog
-	one more change
-	one more change in 10-26mdk
-
-	* standalone/service_harddrake: switch between nv and nvidia driver if
-	commercial driver isn't installed
-
-	* network/adsl_consts.pm: #5056 really refered to austria, not australia
-
-2004/03/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hi.po: updated Hindi file
-
-2004/03/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_conf_backend) only disable kernel driver for 2.4.x
-	kernels since
-	latest speedtouch package is totally broken in userland mode now :-(
-
-	* drakxtools.spec: one more change in 10-26mdk
-
-2004/03/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakgw: add a new line for lord cat
-
-	* network/netconnect.pm: fix drakconnect config writing when there's only
-	one configured
-	interface (eg: at install time) (#8998)
-
-	* drakxtools.spec: add bug reference in 10-25mdk changelog
-	remove doble entries in 10-25mdk changelog
-	10-26mdk
-
-	* standalone/drakconnect (del_intf) enable to delete ADSL and ISDN
-	connections
-
-2004/03/23  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/03/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakgw: add a new line for lord cat
-
-	* drakxtools.spec: add bug reference in 10-25mdk changelog
-	remove doble entries in 10-25mdk changelog
-	10-26mdk
-
-	* standalone/drakconnect (del_intf) enable to delete ADSL and ISDN
-	connections
-
-	* network/netconnect.pm: fix drakconnect config writing when there's only
-	one configured
-	interface (eg: at install time) (#8998)
-	bewan PCI and ethernet ADSL modems work smoothly with 2.6.x kernels
-	for ISDN, do the same warning popup about supported kernels
-
-	* share/po/gl.po, share/po/ga.po: update
-
-2004/03/23  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-	update
-
-2004/03/23  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* any.pm: add nolapic support option (NOn Local APIC)
-
-2004/03/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/it.po, share/po/uk.po, share/po/sv.po,
-	share/po/mk.po, share/po/de.po, share/po/is.po, share/po/hi.po,
-	share/po/nn.po, share/po/et.po, share/po/ca.po, share/po/ja.po,
-	share/po/sq.po: corrected "default:LTR" translations
-
-2004/03/23  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm, install_any.pm, install_steps_interactive.pm: LSB doesn't
-	need kernel 2.4 anymore
-
-	* fs.pm, standalone/diskdrake, standalone/drakupdate_fstab: 
-	  - do not pass options is_removable to set_default_options() since it
-	is not a global options
-	  - replace it with a flag in the part or raw_hd
-	  - set is_removable for part from usb drive
-	  - ensure usb partitions are not checked at boot time (freq field in
-	fstab)
-
-	* keyboard.pm: 
-	  - az, tr and tr_f needs XkbOptions 'caps:shift'
-	  - cleanup
-
-	* share/rpmsrate: replace kernel-enterprise with kernel-i686-up-4GB when
-	BIGMEM
-
-2004/03/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: install ndiswrapper for centrino chipsets
-
-	* standalone/drakgw: fix drakgw removing MII_NOT_SUPPORTED parameter from
-	ifcfg file (#9076)
-
-	* network/netconnect.pm: bewan PCI and ethernet ADSL modems work smoothly
-	with 2.6.x kernels
-	for ISDN, do the same warning popup about supported kernels
-
-	* standalone/drakTermServ (interactive_mode) fix button layout (prevent
-	button collisions and
-	text truncation when translated)
-	(client_type) fix layout (checbox was using too muche vertical space)
-	enable to go in in --testing mode
-
-	* standalone/drakclock: fix packing
-
-	* share/po/gl.po, share/po/cy.po, share/po/fr.po, share/po/ga.po: update
-
-2004/03/22  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/po/fr.po: Fix typo
-
-2004/03/22  Florin Grad  <florin at mandrakesoft.com>
-
-	* network/shorewall.pm: typo (forgot a space)
-	do not write the REDIRECT squid rules if one has only one NIC connected
-	to the net zone
-
-2004/03/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tl.po: updated Filipino file
-
-2004/03/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakperm (row_setting_dialog) hide dialog's horizontal
-	separator, because
-	create_okcancel() already creates its own separator (Robert Vojta,
-	#9153)
-	add space around main vbox (Robert Vojta, #9153)
-
-	* standalone/drakclock: Look & feel enhancement in order to have a
-	smoother GUI (Robert Vojta,
-	#9141) :
-	  - when not embedded, add 5 pixels border around the whole GUI
-	  - add border around frames contents
-	show timezone in drakclock (Robert Vojta, #9141)
-	(get_servers) sort servers (Robert Vojta, #9139)
-
-	* detect_devices.pm (isTVcard) typo fix
-	fix tv cards managed by cx88 and saa7134 (#9112)
-
-	* harddrake/v4l.pm: fix log message
-
-	* standalone/drakxtv: fix tv cards managed by cx88 and saa7134 (#9112)
-
-	* modules.pm (write_conf) simplify
-	typo fix
-	fix tv cards managed by cx88 and saa7134 (#9112)
-
-	* standalone/logdrake (parse_file) oops, forgot one /o
-	fix non first searches (#9115)
-
-2004/03/21  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: done
-
-2004/03/21  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/03/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-	* share/po/ar.po: updated Arabic file
-
-2004/03/21  tbacklund
-
-	* share/po/fi.po: fully translated, was 25 fuzzy, 5 untranslated
-
-2004/03/21  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org's Arabic translation
-
-2004/03/20  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2004/03/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po: updated Farsi file
-
-2004/03/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakxtv: fix error message (#9080)
-	cleanup
-	fix loged message (thx perl_checko)
-	fix #3193:
-	  - use right device
-	  - offer to set the user to config
-	fix saa7134 detection (#5612)
-	testing mode
-	reorder modules import
-	fix wiping out /etc/modules.conf (scott@littlefish.ca)
-	Defaulted canada-cable to NTSC (Scott Mazur (scott@littlefish.ca)
-
-	* standalone/drakvpn: icon
-
-	* harddrake/v4l.pm: sync with 2.6.3-4mdk
-	reorder modules import
-	(config) read current configuration (Scott Mazur <scott@littlefish.ca>)
-	share translation
-	fix setting options for bttv instead of saa7134 (#5612)
-
-	* drakxtools.spec: move draksplash into drakxtools b/c it needs gtk+
-	(#7807)
-	oops, that should have been 25mdk
-
-2004/03/19  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated
-
-2004/03/19  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: Update GNOME devel packages
-
-2004/03/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po, share/po/DrakX.pot, share/po/nb.po, share/po/zh_CN.po,
-	share/po/it.po, share/po/eu.po, share/po/ru.po, share/po/uk.po,
-	share/po/cy.po, share/po/mk.po, share/po/af.po, share/po/tl.po,
-	share/po/cs.po: updated pot file
-
-	* share/po/et.po: Updated Estonian file; fixed quote in Hindi file
-	updated pot file
-
-	* share/po/sk.po, share/po/th.po, share/po/hr.po, share/po/sv.po,
-	share/po/ltg.po, share/po/zh_TW.po, share/po/sq.po, share/po/nn.po,
-	share/po/mn.po, share/po/pt.po, share/po/fr.po, share/po/ta.po: updated
-	po files
-	updated po files
-	updated pot file
-
-	* share/po/ms.po, share/po/gl.po, share/po/pt_BR.po, share/po/be.po,
-	share/po/ko.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/uz.po, share/po/ro.po, share/po/sr@Latn.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/br.po, share/po/sl.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/lt.po, share/po/tg.po, share/po/bs.po,
-	share/po/wa.po, share/po/is.po, share/po/az.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/bg.po,
-	share/po/el.po, share/po/uz@Latn.po: updated po files
-	updated pot file
-
-	* standalone/drakvpn: disambiguated string
-
-	* share/po/hi.po: updated po files
-	Updated Estonian file; fixed quote in Hindi file
-	updated pot file
-
-2004/03/19  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: adapt to devfs (?) naming which breaks compatibility
-	(bugzilla #9029)
-
-	* ugtk2.pm: 
-	  - fix _find_imgfile()
-	  - cleanup
-
-	* install_steps.pm: devfs=mount is the default for kernel 2.6 (what about
-	2.4 ?), so one need
-	devfs=nomount when devfsd is not installed
-
-2004/03/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-	* standalone/drakvpn: add hint for translators (cooker-i18n request)
-
-	* drakxtools.spec: 10-24mdk
-
-	* network/netconnect.pm: eagle-usb maintainers ask not to fill dns by
-	default because ppp will
-	return better one through peerdns option
-	dnsX were renamed as dnsServerX+1 long time ago and are managed one
-	step earlier
-
-2004/03/19  Warly  <warly at mandrakesoft.com>
-
-	* standalone/drakboot: add Olivier Blin patches to reread the previous
-	configuration
-
-2004/03/19  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: adapt to devfs (?) naming which breaks compatibility
-	(bugzilla #9029)
-
-	* ugtk2.pm: 
-	  - fix _find_imgfile()
-	  - cleanup
-
-	* install_steps.pm: devfs=mount is the default for kernel 2.6 (what about
-	2.4 ?), so one need
-	devfs=nomount when devfsd is not installed
-
-2004/03/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm (switch) perl_checker fix
-
-	* network/netconnect.pm: eagle-usb maintainers ask not to fill dns by
-	default because ppp will
-	return better one through peerdns option
-	dnsX were renamed as dnsServerX+1 long time ago and are managed one
-	step earlier
-
-2004/03/18  David Baudens  <baudens at mandrakesoft.com>
-
-	* standalone/icons/localedrake-32.png,
-	standalone/icons/localedrake-48.png, drakxtools.spec,
-	standalone/icons/localedrake-16.png, Makefile.drakxtools: Add icons for
-	localedrake menu entry
-
-	* share/rpmsrate: Add kdegraphics-common in GRAPHICS section
-
-2004/03/18  marco
-
-	* share/po/it.po: successivo -> avanti
-
-2004/03/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tl.po: updated Filipino file
-
-2004/03/18  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: new helper function may_set_icon that takes care of missing
-	wiz_default_up during install
-
-	* partition_table/dos.pm: not guessing a geometry when default_ok is no
-	big deal
-
-2004/03/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm: install alsa-utils if needed (#6288)
-
-	* network/adsl.pm: only kill pppoa for sagem modem (eg for bewan, we use
-	pppoa plugin for
-	ppp)
-	fix bewan support by providing an ad-how /etc/ppp/options
-
-	* standalone/icons/drakups.png: use mdk icon for drakups
-
-	* network/netconnect.pm: fix obvious wrong lookup (at install time, we
-	must check installed
-	root fs instead of /)
-	always offer to restart adsl connections
-	only warn about 2.4.x kernel for bewan modem
-	only warn about the fact we need 2.4.x kernel when we're under 2.6.x
-
-	* Makefile.config: reput back drakups
-
-	* share/rpmsrate: install kernel-2.4.x for pci modems whose binary driver
-	isn't ported
-	on 2.6.x
-
-2004/03/18  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: move the DRIVER part from INSTALL to SYSTEM
-	fix speedtouch-mgm -> mgmt
-	fix bad indentation
-
-2004/03/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: Gnome Low-Saxon translations use "nds_DE", putting it on
-	LANGUAGE
-
-2004/03/18  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: new helper function may_set_icon that takes care of missing
-	wiz_default_up during install
-
-	* partition_table/dos.pm: not guessing a geometry when default_ok is no
-	big deal
-
-2004/03/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: only warn about the fact we need 2.4.x kernel
-	when we're under 2.6.x
-
-	* network/adsl.pm: only kill pppoa for sagem modem (eg for bewan, we use
-	pppoa plugin for
-	ppp)
-	fix bewan support by providing an ad-how /etc/ppp/options
-
-	* Makefile.config: reput back drakups
-
-	* share/rpmsrate: install kernel-2.4.x for pci modems whose binary driver
-	isn't ported
-	on 2.6.x
-
-2004/03/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_TW.po: chinese names for countries
-
-	* share/po/uk.po: updated Ukrainian file
-
-	* share/po/mn.po: updated po files
-
-2004/03/17  Pixel  <pixel at mandrakesoft.com>
-
-	* install_gtk.pm: enlarge steps window (no pb since the window is
-	invisible) (bugzilla #8985)
-
-	* standalone/diskdrake: add "diskdrake
-	--change-geometry=<device>=[<cylinders>,]<heads>,<sectors>" to
-	allow forcing the geometry used in the partition table. This allows
-	helping
-	poor Windows booting using old int13 function 2. This should work when
-	Windows
-	has not been resized.
-
-2004/03/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm: do not alter oss<->alsa drivers mapping table
-	(olivier blin, #8501)
-	When current driver doesn't match current sound card (because sound
-	card has been replaced for example), draksound allows to choose the
-	driver between current driver and its alternatives, but does not
-	propose default driver and alternatives for current sound card. So
-	available drivers don't match current sound card (olivier blin, #8501)
-
-	* standalone/drakedm: fix dm restart
-
-	* standalone/service_harddrake: remove /etc/asound.state *before*
-	restarting sound service
-
-	* drakxtools.spec: 10-24mdk
-
-2004/03/17  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: community install logo
-
-2004/03/17  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Update advertising translations
-
-	* share/compssUsers: Update
-	Update
-
-	* share/rpmsrate: Fix my mistake (forgot to cvs up before commit)
-	Update
-
-2004/03/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_TW.po: chinese names for countries
-
-2004/03/17  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/dos.pm, partition_table/raw.pm, partition_table.pm: add
-	set_best_geometry_for_the_partition_table to use the hd geometry instead
-	of the physical geometry returned by the kernel (since for now i can't
-	have bios geometry on 2.6)
-
-2004/03/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: misc perl_checker cleanup
-	remove debug statements
-	fix no information for drivers that do not support ethtool ioctl (eg:
-	sk98lin): try to match the device by interface name and driver name
-	(won't work for several cards managed by the same driver)
-
-	* share/po/fr.po: update
-
-	* share/rpmsrate: roll-back bogus dadou commit
-
-	* network/netconnect.pm: fix pci modem support:
-	  - handle manually installed drivers
-	  - removed urpmi sources
-	  - faster checking for driver presence
-
-2004/03/17  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: community install logo
-
-	* share/rpmsrate: s/glade/glade2/
-
-2004/03/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-2004/03/17  Pixel  <pixel at mandrakesoft.com>
-
-	* partition_table/raw.pm, partition_table.pm: add
-	set_best_geometry_for_the_partition_table to use the hd geometry instead
-	of the physical geometry returned by the kernel (since for now i can't
-	have bios geometry on 2.6)
-
-	* partition_table/dos.pm: add set_best_geometry_for_the_partition_table to
-	use the hd geometry instead of the physical geometry returned by the
-	kernel (since for now i can't have bios geometry on 2.6)
-	  - sector2CHS() now gives sector number starting at 0
-	  - CHS2rawCHS() takes care of giving sector number starting at 1
-
-2004/03/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: split out agp controllers out of bridges
-
-	* standalone/drakups: use std banner
-	use new $ugtk2::wm_icon for x11 icon
-
-	* network/ethernet.pm (get_eth_cards) if SIOCETHTOOL ioctl is not
-	supported by driver, try
-	to lookup card by driver in devices list (if there's only one physical
-	card managed by this driver)
-
-	* standalone/logdrake, standalone/drakfont: use new $ugtk2::wm_icon for
-	x11 icon
-
-	* network/adsl.pm: do not pass eth interface and user to adsl-start,
-	they're already
-	provided in pppoe.conf (#2004)
-
-	* network/adsl_consts.pm: update wanadoo dns according to
-	
-	http://www.wanadoo.fr/bin/frame2.cgi?u=http%3A//assistance.wanadoo.fr/reponse791.asp
-
-	* standalone/service_harddrake: add agpgart modules to modprobe.preload if
-	needed
-
-	* standalone/harddrake2: use new $ugtk2::wm_icon for x11 icon
-	show module for system bridges if it's not unknown (aka not managed by
-	kernel core)
-	blacklist agp controllers class (they're still visible in the bridges
-	one)
-
-	* ugtk2.pm (_create_dialog) set x11 icon for dialogs too
-	(new) fix x11 icon for Gtk2::Plug
-	(_find_imgfile) prevent matching subdirectory (eg: harddrake)
-
-	* network/netconnect.pm: fix SmartLink modem managment (#8959)
-
-	* standalone/drakconnect: misc perl_checker cleanup
-	remove debug statements
-	fix no information for drivers that do not support ethtool ioctl (eg:
-	sk98lin): try to match the device by interface name and driver name
-	(won't work for several cards managed by the same driver)
-	use new $ugtk2::wm_icon for x11 icon
-
-2004/03/16  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: transl.in progress
-
-2004/03/16  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/compssUsers.server: Add NETWORKING_FILE support for PowerPackPlus
-
-	* standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/tv.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/multimedia.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/cd.png,
-	standalone/icons/harddrake2/hw_network.png: Update images
-
-2004/03/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* pixmaps/langs/lang-ku.png, pixmaps/langs/lang-hy.png,
-	pixmaps/langs/lang-tt.png: updated and added pictures for language
-	selection list.
-	enabled choice for Filipino (we have quite good translations),
-	Low-Saxon and Kyrgyz.
-
-	* pixmaps/langs/lang-gn.png, pixmaps/langs/lang-nds.png,
-	pixmaps/langs/lang-ky.png, pixmaps/langs/lang-tk.png,
-	pixmaps/langs/lang-ph.png: readding images in binary mode
-	removed pixmaps to readd them in binary mode
-	updated and added pictures for language selection list.
-	enabled choice for Filipino (we have quite good translations),
-	Low-Saxon and Kyrgyz.
-
-	* lang.pm: changed order of LANGUAGE value for Filipino so monolingual
-	windowmanagers
-	can have translated menus
-	updated and added pictures for language selection list.
-	enabled choice for Filipino (we have quite good translations),
-	Low-Saxon and Kyrgyz.
-
-	* share/po/it.po: updated Italian file
-
-2004/03/16  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/drakupdate_fstab: choose wether to use supermount is now
-	based on variable SUPERMOUNT in /etc/sysconfig/dynamic
-
-	* ugtk2.pm: fix typo
-	  - add $ugtk2::wm_icon (esp. for park-rpmdrake)
-	  - cleanup, correct indentation
-
-2004/03/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/logdrake (alert_config) fix wizard when logdrake is embedded
-	(alert_config) fix wizard on second run
-	(alert_config) make it a wizard again (that is, with banner,
-	"previous"/"next" buttons and the like)
-	set x11 ico
-
-	* share/rpmsrate: wireless-tools is listed twice!
-	speedtouch was listed two times in the old days!
-	install speedtouch firmware too
-	automatically install speedtouch for Alcatel USB ADSL modems
-	automatically install eagle-usb for sagem ADSL modems
-	install kernel-2.4.x for internal ISDN devices
-
-	* ugtk2.pm (new) set x11 icon for non wizard tools
-	(new) set default x11 icon
-
-	* standalone/harddrake2, standalone/drakups: set x11 ico
-
-	* standalone/drakclock: fix server lookup (#8846)
-
-	* standalone/icons/drakups.png: add drakups icon
-	"Copyright (C) 2004 MGE UPS SYSTEMS / Luc Descotils
-	This graphic is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	at your option) any later version..."
-
-	* network/netconnect.pm: bewan support
-	only show encapsulation parameter for sagem modem
-	preselect pppoa for bewan too
-	make it clear these checks are only for pci modems
-	pci modem: only take care of selected one
-	warn that we only support kernel 2.4.x for pci modems
-	remove debug statement
-	for ADSL Bewan and ISDN modem, warn that only 2.4.x kernels are
-	supported
-
-	* network/adsl.pm: bewan support
-	(adsl_conf_backend) fix adsl stop on pppoa links
-
-	* network/modem.pm (ppp_configure) really fix modem symlink (#7967)
-
-	* standalone/drakconnect: set x11 ico
-	(configure_net) do not offer to alter domain name since this is
-	achievable through FQDN
-
-	* standalone/drakfont (interactive_mode) better style
-	(interactive_mode, dialog) let's have nice icon in sub dialogs when
-	embedded too
-	(dialog) make subdialogs be transcient for main window when not embedded
-	set x11 ico
-
-2004/03/16  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: clean majors introduced into the CVS by mistake
-
-2004/03/15  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Replace xsane by scanner-gui (allows to install kooka or
-	xsane)
-	Readd Audacity (needs to be moved from Contrib to Main; it should be
-	installed by default for all products)
-
-2004/03/15  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Fix misnamed inittab\$\$IP=xxx.xxx.xxx.xxx\$\$.
-
-2004/03/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect (configure_net) enable to alter hostname
-	(configure_net) fix unlisted first dns server
-
-	* drakxtools.spec: 10-23mdk
-
-	* standalone/logdrake: fix explanations in mcc that got broken by #8412
-	speedup
-
-	* network/netconnect.pm: always write scripts like in the old days but
-	when there's no cnx
-	skip "start on boot" step for LAN (already managed by network scripts)
-	perl_checker fix
-	write ether conf later on QA request
-	do not list anymore wireless cards in LAN connection, only in wireless
-	connections
-	fix ADSL modems not listed unless one try to manually pick a network
-	card (#8611): prevent module::interactive from offering to pick a
-	module when there's no network cards
-
-	* share/po/fr.po: update
-
-2004/03/15  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakgw: add ppp+ and ippp+ at the interfaces list
-
-	* network/shorewall.pm: add ppp+ and ippp+ in the interfaces list
-
-2004/03/15  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/03/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: do not list anymore wireless cards in LAN
-	connection, only in wireless
-	connections
-	fix ADSL modems not listed unless one try to manually pick a network
-	card (#8611): prevent module::interactive from offering to pick a
-	module when there's no network cards
-
-	* network/ethernet.pm (mapIntfToDevice) do not try to match a physical
-	device when SIOCETHTOOL ioctl is not supported
-
-	* standalone/drakclock: make the ntpdate after stopping the ntpd
-	(manu@agat.net, #8141)
-
-	* network/network.pm (write_interface_conf) fix missing quotes around
-	wireless encryption key (#8887)
-
-	* standalone/drakconnect (configure_net) fix spacing around DNS/domainname
-	settings table
-	(configure_net) write back domain name and dns servers
-	(configure_net) fix domainname reading
-	(configure_net) fix crash on internet access dialog closing
-	(configure_net) update connection status in background (#7800)
-	add --old option in order to see old interface
-
-2004/03/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po: updated Farsi file
-
-	* share/po/cy.po, share/po/nn.po, share/po/ca.po: updated Welsh and
-	Nynorsk files
-
-2004/03/14  tbacklund
-
-	* share/po/fi.po: fully translated, was 10 fuzzy, 1 untranslated
-
-2004/03/14  tsdgeos
-
-	* share/po/ca.po: updating
-
-2004/03/14  yrahal
-
-	* share/po/ar.po: Weekly Arabeyes' Arabic translation.
-
-2004/03/13  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated translation
-
-2004/03/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po: updated Farsi file
-
-	* share/po/cy.po: Updated Welsh file
-
-	* share/po/et.po: updated Estonian file
-
-	* share/po/uz.po, share/po/uz@Latn.po: updated Uzbek files
-
-2004/03/13  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Let printerdrake install "scanner-gui" instead
-	of "xsane" when it sets up an HP multi-function device.
-	"MandrakeSoft" -> "Mandrakesoft", "Mandrake" -> "Mandrakelinux".
-
-	* standalone/scannerdrake: Let scannerdrake install "scanner-gui" instead
-	of "xsane", so that scanning GUI actually used can be determined by the
-	system environment.
-	"MandrakeSoft" -> "Mandrakesoft", "Mandrake" -> "Mandrakelinux".
-
-	* standalone/printerdrake: "MandrakeSoft" -> "Mandrakesoft", "Mandrake" ->
-	"Mandrakelinux".
-
-2004/03/12  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Update for PowerPackPlus
-
-2004/03/12  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated
-
-2004/03/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-	* lang.pm: small correction
-	improved previous change
-
-	* share/po/ms.po, share/po/id.po, share/po/gl.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/nn.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/mn.po, share/po/ko.po, share/po/sr.po,
-	share/po/lt.po, share/po/he.po, share/po/ca.po, share/po/ar.po,
-	share/po/ltg.po, share/po/uz.po, share/po/is.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/ta.po, share/po/sq.po, share/po/sr@Latn.po,
-	share/po/eu.po, share/po/es.po, share/po/eo.po, share/po/bg.po,
-	share/po/el.po, share/po/lv.po, share/po/hu.po, share/po/uz@Latn.po:
-	merged some strings from mcc
-
-2004/03/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: eagle was renamed as eagle-usb
-
-2004/03/12  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/03/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-	* lang.pm: improved previous change
-	always define KDM fonts dependending on encoding (fix for bug #8714)
-
-2004/03/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-22mdk
-
-	* standalone/drakconnect (build_notebook) default protocol is dhcp (eg for
-	unconfigured
-	interfaces), thus preventing ip checks faillure on protocol change on
-	other network interfaces
-	(apply) do not write IPADDR, NETMASK and NETWORK fields in ifcfg-ethX
-	when using DHCP
-	(apply) factorize interface hash
-	(apply) fix crash (is_dynamic_ip expect a hash of network interaces,
-	not a single interface)
-	(configure_net) kill useless code
-	(configure_net) fix layout by using a table
-	remove a few more parameters
-	(configure_net) get rid of mask now we've cleaned up parameters
-	only show dns from resolv.conf for now
-	(configure_net) remove some parameters according to specs
-	(configure_net) sanitize buttons layout (#8637)
-
-	* network/netconnect.pm: provide a nice way to go back to summary when
-	interface is already configured (#8002)
-	fix buttons so that they're labeled as cancel/ok instead of
-	previous/next when warning in network installations
-	fix writing drakconnect config file at install time (#7478)
-
-	* standalone/drakfont (advanced_install) "Install" button is sensitive
-	only if there're some
-	fonts in the font list
-
-2004/03/12  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: removed audacity (in contrib)
-
-2004/03/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-22mdk
-
-	* network/netconnect.pm: fix writing drakconnect config file at install
-	time (#7478)
-
-2004/03/11  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakgw: fix the disable, enable functions
-
-	* network/shorewall.pm: add some tests for the REDIRECT squid rules
-
-2004/03/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tl.po: updated Filipino file
-
-2004/03/11  Pixel  <pixel at mandrakesoft.com>
-
-	* install_any.pm: fix installing locales-XX for lang=nb which needs
-	locales-no (one needs to use provides)
-
-	* fsedit.pm: disallow lvm on / with no /boot until lilo handles it
-
-	* install2.pm: tentatively fix lilo with lvm on /
-
-	* bootloader.pm: 
-	  - always generate a precise entry using the precise version
-	  - remove the linux-2.4 or linux-2.6 entries which don't work together
-	with the precise version entry
-	  - still have the "linux" entry
-
-	* install_steps_interactive.pm: nice fix for installing locales-XX
-	corresponding the chosen country (using packagesProviding())
-	workaround code trying to install locales-nb (bugzilla #8287)
-
-	* install_steps.pm: catch cdie's in auto_install
-
-	* do_pkgs.pm: use pkgs::packagesProviding()
-
-	* pkgs.pm: 
-	  - add function packagesProviding()
-	  - use it
-
-2004/03/11  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Install extra packages when using wizard too.
-	Key transfer in GUI wasn't reporting errors.
-
-2004/03/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakvpn: remove debug statement
-	fix previous button on first step (robert.vojta@qcm.cz, anthill #387)
-
-	* ugtk2.pm (gtktext_insert) if we want anonymous tags, just create
-	anonymous tags
-	instead of creating fake tag names that we just discard after (rand is
-	not guarranted to not return the same number twice...)
-
-	* harddrake/data.pm: fix in strict mode
-
-	* detect_devices.pm: workaround anthil bug #369
-
-	* mdk-stage1/probing.c: fix eth[67] detection (gc)
-
-	* standalone/drakgw: fix previous button on first step
-	(robert.vojta@qcm.cz, anthill #386)
-
-	* standalone/logdrake (text_append) fix second run (on next filling, we
-	shall not create
-	tags with name of existing ones)
-	(parse_file) fix search :-)
-	(log_output) take a color and a font as parameters now
-	(log_output__real) splited from log_output(), insert text into
-	textview at once
-	(*) use new framework to speedup (#8412)
-	(text_append) introduce it, forked from gtktext_insert()
-	
-	unlike the later, it create named tags, thus reducing tagtable size
-	from 30000+ tags to 10-20, thus speedup logdrake in quite a big way.
-	
-	it should probably replace gtktext_insert in mdk10.1 since all
-	gtktext_insert users really have quite a few tags (eg: 1 for
-	harddrake2 and rpmdrake)
-	(parse_file) speed up it by 20% (#8412) but logcolorize is the top one
-	in profiles
-
-	* standalone/drakboot: list yes/no for autologin in a more intuitive way,
-	that is yes is
-	grouped with user and wm pull down menus (robert.vojta@qcm.cz, anthill
-	#390)
-
-2004/03/10  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/03/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/uz@Latn.po:
-	updated pot file
-
-	* share/po/tl.po: updated pot file
-	Updated Filipino file
-
-	* keyboard.pm: list jp106 keyboard as latin only to avoid the misleading
-	screen about
-	language switching (japanese input doesn't use that method)
-
-2004/03/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/help-zh_CN.pot, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/advertising/dwd-04.pl, share/po/pt_BR.po, share/po/th.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po,
-	install_steps_interactive.pm, network/netconnect.pm, share/po/be.po,
-	share/advertising/dis-10.pl, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, network/drakfirewall.pm, install_steps_newt.pm,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/uz.po, share/po/help-ru.pot,
-	share/advertising/dwd-02.pl, standalone/printerdrake, share/po/ro.po,
-	share/advertising/dwd-01.pl, share/advertising/dis-01.pl,
-	share/po/zh_TW.po, share/po/sr@Latn.po, share/po/sq.po,
-	share/advertising/dwd-05.pl, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/advertising/ppp-10.pl, share/po/lv.po,
-	share/po/hu.po, printer/printerdrake.pm, share/advertising/pwp-09.pl,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, help.pm, share/po/br.po,
-	share/po/sl.po, share/advertising/ppp-03.pl, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/advertising/dwd-03.pl, share/po/uk.po, share/po/mn.po,
-	share/po/help-de.pot, share/po/lt.po, share/po/cy.po, crypto.pm,
-	share/advertising/ppp-02.pl, share/po/help-it.pot,
-	install_interactive.pm, share/advertising/dwd-07.pl, share/po/tg.po,
-	any.pm, install_steps_gtk.pm, share/po/bs.po, share/po/mk.po,
-	share/po/wa.po, install_messages.pm, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, bootloader.pm, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/nl.po,
-	share/po/help-fr.pot, share/advertising/ppp-01.pl, share/po/tl.po,
-	share/po/de.po, share/advertising/pwp-03.pl,
-	share/advertising/ppp-04.pl, share/advertising/pwp-04.pl,
-	share/advertising/pwp-01.pl, share/po/help-es.pot, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/advertising/dwd-09.pl, standalone/scannerdrake,
-	share/po/uz@Latn.po: spell Mandrakelinux in one word
-
-	* standalone/drakperm (row_setting_dialog) sanitize spacing in frames
-
-2004/03/10  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakgw: fix the 8669 bug
-
-2004/03/10  fwang
-
-	* share/po/zh_CN.po: update
-	update
-
-2004/03/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tl.po: Updated Filipino file
-
-2004/03/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* mdk-stage1/probing.c (get_net_devices) increase max number of detectable
-	net cards from 6 to 10
-
-2004/03/09  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/03/09  Pixel  <pixel at mandrakesoft.com>
-
-	* modules.pm: special case to handle imm & ppa on kernel 2.6:
-	  - need parport_pc
-	  - modules insmod always succeed, so need to check
-	/proc/sys/dev/parport/parport0/devices/{imm,ppa}
-
-	* keyboard.pm: keyboard::load() causes some errors on kernel 2.4, ignoring
-	them
-
-	* Xconfig/card.pm: catch exception (bugzilla #8726)
-
-2004/03/09  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Reverse trivial translation typo. Change
-	the_time() usage.
-	Fix breakage introduced in config rewrite.
-	All wizard methods should end at config summary.
-	Support for plain tar. Deal with mixture of formats on restore. (#8676)
-	Fix issue with first incremental pass not using base as comparison.
-	Rework most file selections to use the same sub, drop other subs.
-
-2004/03/09  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Made more clear choices in the first-time
-	dialog of printerdrake.
-
-2004/03/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/draksplash: fix boot_conf_path usage
-	rename thm_conf_path as boot_conf_path to prevent confusion with
-	thm_path
-	(write_boot_thm) simplify through mkdir_p()
-	misc perl_checker cleanups
-	fix config file path (directory is now named config, not cfg)
-
-	* harddrake/data.pm: really, really fix ISDN cards detection :-(
-	really adapt to new network::isdn::isdn_detect_backend() API
-
-	* share/po/fr.po: respect upcase letters
-
-	* network/isdn.pm (read_providers_backend) add prototype in order to
-	please lord perl_checker
-
-	* standalone/drakbackup: fix crash in wizard (#8654) (setVarsInSh use
-	output instead of output_p...)
-	(the_time) simplify
-
-	* network/netconnect.pm: fix isdn config step
-	isdn config step: enable to alter defined but empty fields
-	fix parameters reading/writin in isdn config step: take parameters
-	from isdn data structure, not cnx one
-	fix isdn config step by using runtime references
-
-2004/03/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-2004/03/08  Pixel  <pixel at mandrakesoft.com>
-
-	* install_any.pm: fix typo
-	in generate_automatic_stage1_params():
-	  - handle FTP via HTTP proxy (bugzilla #8699)
-	  - cleanup using a different data-structure
-
-	* modules.pm: a missing module is now an error, that way it won't be in
-	scsi_hostadapters. In load_category(), exception is caught, so no pb
-	when using load_category(). But beware, this may break!
-
-2004/03/08  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix to prevent saving host passwd when user
-	requests not to (#8700).
-
-2004/03/08  Pixel  <pixel at mandrakesoft.com>
-
-	* modules.pm: a missing module is now an error, that way it won't be in
-	scsi_hostadapters. In load_category(), exception is caught, so no pb
-	when using load_category(). But beware, this may break!
-
-	* install_any.pm: in generate_automatic_stage1_params():
-	  - handle FTP via HTTP proxy (bugzilla #8699)
-	  - cleanup using a different data-structure
-
-2004/03/08  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: UI coherency (#8675).
-	Fix some missing configuration options (#8654).
-
-2004/03/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: rename ensure_is_installed_if_availlable( as
-	ensure_is_installed_if_available()
-	install unicorn package for bewan modems
-
-	* do_pkgs.pm: rename ensure_is_installed_if_availlable( as
-	ensure_is_installed_if_available()
-
-2004/03/08  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/03/08  Pixel  <pixel at mandrakesoft.com>
-
-	* devices.pm: nicer debug error message
-
-	* modules.pm: a missing module is now an error, that way it won't be in
-	scsi_hostadapters. In load_category(), exception is caught, so no pb
-	when using load_category(). But beware, this may break!
-
-	* fsedit.pm: /proc/partitions parsing was broken for scsi cdroms using
-	non-devfs names, and
-	our 2.6 doesn't use devfs names in /proc/partitions... :'-(
-	(bugzilla #8641)
-
-2004/03/08  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: UI coherency (#8675).
-	Fix some missing configuration options (#8654).
-
-2004/03/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: rename ensure_is_installed_if_availlable( as
-	ensure_is_installed_if_available()
-	install unicorn package for bewan modems
-	fix variable interpolation in strings
-	misc perl_checker cleanups
-	isdn_read_config() alter its argument, thus there's no need in returning
-	it
-	(which may induce developer in error by believing argument is not
-	overwritten...)
-	standalone drakconnect already discard returned value anyway...
-	port old ISDN wizard upon new wizard layer
-	fix first_modem() call
-	indent
-	simplify speedtouch firmware installation through newly introduced
-	do_pkg::ensure_is_installed_if_availlable()
-	wizard: be aware of bewan modems detection
-
-	* detect_devices.pm (getBewan) fix bewan modem detection
-
-	* standalone/drakperm: center labels like before
-
-	* do_pkgs.pm: rename ensure_is_installed_if_availlable( as
-	ensure_is_installed_if_available()
-	(ensure_is_installed_if_availlable) introduce it in order to check if we
-	need
-	to install a package, then install it if it's availlable (eg: for binary
-	drivers not availlable in download edition)
-
-	* network/isdn_consts.pm: 
-	  - add "|" separator
-	  - remove bus from description (the user has already selected the bus
-	type)
-
-	* share/po/fr.po: fix missing upercase first letter
-	be aware of string change due to bewan support
-
-	* share/po/br.po: be aware of string change due to bewan support
-	update
-
-	* standalone/draksplash (make_boot_frame) fix crash on color switch
-	(mk_frame)
-	  - workaround horrible packing by using a table instead of a vbox
-	  - do packing of resulted table outside mk_frame() which is much saner
-	fix spacing around commas (sanitizing)
-	gc prefers "obj->method" rather than "method obj" call style
-	use option menu for resolutions list
-	(mk_frame) enable to use either combo boxes or option menus for lists
-	(mk_frame) fix combo boxes filling
-	(which_res_exist) unjonathan-ize
-	(show_prev) only redraw needed part, not whole image
-	(show_prev) fix crash on image drawing
-	(show_prev) fix crash on image scaling
-	fix crash on "preview" button
-	(get_this_thm_res_conf) add prototype to help perl_checker
-	kill unused variables
-	kill perl4 function call style
-
-	* network/isdn.pm: isdn_read_config() alter its argument, thus there's no
-	need in returning it
-	(which may induce developer in error by believing argument is not
-	overwritten...)
-	standalone drakconnect already discard returned value anyway...
-	kill isdn_get_info() and isdn_get_list() (they were unused since quite a
-	few
-	releases :-()
-	(isdn_get_cards) introduce it to build a tree bus|card for isdn wizard
-	(get_info_providers_backend) prevent faillure as soon as translaters
-	catch up
-	export isdn_read_config()
-	kill isdn_ask(), isdn_ask_info() and isdn_ask_protocol() since they were
-	merged into wizard (aka ported to new wizard layer)
-	(isdn_get_cards_by_type) splited out of old isdn_ask() func
-	(get_info_providers_backend) drop file argument and do ISDN db lookup in
-	place
-	(read_providers_backend) move it from network::tools to network::isdn
-	(isdn_detect_backend) enhance detection: just return a list of devices
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/uk.po, share/po/mn.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/nl.po,
-	share/po/tl.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/uz@Latn.po: be aware of string
-	change due to bewan support
-
-	* network/adsl.pm (adsl_detect) detect bewan ADSL modems
-
-	* network/tools.pm (read_providers_backend) move it from network::tools to
-	network::isdn
-
-	* harddrake/data.pm: adapt to new network::isdn::isdn_detect_backend() API
-
-	* ugtk2.pm (Gtk2::WrappedLabel::new) fix unusing label
-	(Gtk2::WrappedLabel::new) enable to alter default alignment
-
-2004/03/08  yrahal
-
-	* share/po/ar.po: Doing a sync with Arabeyes.org's CVS...
-	There should be no stat differences anymore.
-
-2004/03/07  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/03/07  keld
-
-	* share/po/da.po: updates
-	soft/ftw/po/da.po gi/perl-install/share/po/da.po
-
-2004/03/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ar.po: updated po file
-
-2004/03/07  tbacklund
-
-	* share/po/fi.po: finnish translations at 100% again...
-
-2004/03/07  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org's Arabic translation of the
-	week...
-
-2004/03/06  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/03/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-2004/03/05  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/03/05  keld
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-
-2004/03/05  Pixel  <pixel at mandrakesoft.com>
-
-	* install_any.pm: replacing automatic=method:disk with $param instead of
-	adding $param (since $param already contains automatic=met:disk)
-
-	* fs.pm: no entry in fstab for zips (now cleanly done by hotplug)
-
-	* detect_devices.pm: fix warning
-
-2004/03/05  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/cups.pm, printer/printerdrake.pm: Let URIs listed by "lpinfo -v"
-	be shown in the dialog for entering a URI manually.
-
-2004/03/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	standalone/drakTermServ, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/ar.po,
-	share/po/ltg.po, share/po/nb.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/nn.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: typo fix
-
-	* network/network.pm (write_resolv_conf) only remove /etc/resolv.conf if
-	it's really a link
-	(prevent no resolv.conf rewriting when it was empty eg b/c link was
-	dead)
-
-2004/03/04  keld
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-	Updates
-	gi/perl-install/share/po/da.po
-	Updates
-	gi/perl-install/share/po/da.po
-
-2004/03/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/ca.po, share/po/nn.po: updated Estonian file
-	updated pot file
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/ja.po, share/po/hr.po, share/po/be.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/he.po, share/po/da.po,
-	share/po/ar.po, share/po/ltg.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/mn.po, share/po/uk.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: updated pot file
-
-	* share/po/tl.po: updated po file
-	updated pot file
-
-	* share/po/nb.po: updated Norwegian file
-	updated pot file
-
-2004/03/04  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: fix & cleanup generating
-	replay & auto_install images
-	(thanks to David Eastcott)
-
-	* install_any.pm: oops, fix commit
-	fix & cleanup generating replay & auto_install images
-	(thanks to David Eastcott)
-
-2004/03/04  tsdgeos
-
-	* share/po/ca.po: Unfuzzying
-
-2004/03/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: fix crash on modem configuration in installer
-	(standalone drakconnect
-	didn't had the bug because it has already loaded the network::modem
-	package at this stage)
-
-	* standalone/draksec (wait_msg) show up some translated title
-
-	* ugtk2.pm: enable exception managment even at install time (installer set
-	$::no_ugtk_init)
-
-2004/03/04  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/init.c: unmounting /sys is not needed (useful to have one
-	less line displayed after "unmounting filesystems...")
-
-	* install_steps.pm, install_steps_interactive.pm: fix & cleanup generating
-	replay & auto_install images
-	(thanks to David Eastcott)
-
-	* install_any.pm: oops, fix commit
-	fix & cleanup generating replay & auto_install images
-	(thanks to David Eastcott)
-
-2004/03/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: fix crash on modem configuration in installer
-	(standalone drakconnect
-	didn't had the bug because it has already loaded the network::modem
-	package at this stage)
-
-	* ugtk2.pm: enable exception managment even at install time (installer set
-	$::no_ugtk_init)
-
-2004/03/04  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakgw: really enable the proxy squid, fix the proxy REDIRECT
-	shorewall rule, fis the shorewall interfaces configuration
-
-	* network/shorewall.pm: use the name of the network interface instead of
-	the label
-	remove an obsolete comparison in the read function
-
-2004/03/04  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/init.c: unmounting /sys is not needed (useful to have one
-	less line displayed after "unmounting filesystems...")
-
-	* install_steps.pm, install_steps_interactive.pm: fix & cleanup generating
-	replay & auto_install images
-	(thanks to David Eastcott)
-
-	* install_any.pm: oops, fix commit
-	fix & cleanup generating replay & auto_install images
-	(thanks to David Eastcott)
-
-2004/03/04  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/03/04  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Don't destroy "fat" client inittab.
-
-2004/03/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_steps.pm (hasNetwork) do not refuse to up the network when in
-	dhcp (bad oem patch)
-
-	* standalone/drakgw: reput back strict pragma
-	list network card name rather than just ethX in device list
-
-2004/03/03  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: 2 entries
-
-2004/03/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/is.po, share/po/nn.po, share/po/et.po: updated pot files
-
-2004/03/03  Pixel  <pixel at mandrakesoft.com>
-
-	* devices.pm: one now need cryptoloop and aes when using encryption
-	(kernel 2.6)
-
-	* fs.pm: move set_loop() from formatMount_part to real_format_part to fix
-	Format with encrypted files/devices
-	one now need cryptoloop and aes when using encryption (kernel 2.6)
-
-2004/03/03  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/03/03  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Default kernel version, add gdm user if needed,
-	autologin warning.
-	Copy server X keyboard config to client. Default thin client setup.
-	Change banner method as other drak tools.
-
-2004/03/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: add vpi/vci parameters for australia ISPs
-	(#5056)
-
-	* drakxtools.spec: 10-21mdk
-
-2004/03/03  Pixel  <pixel at mandrakesoft.com>
-
-	* devices.pm: one now need cryptoloop and aes when using encryption
-	(kernel 2.6)
-
-	* fs.pm: move set_loop() from formatMount_part to real_format_part to fix
-	Format with encrypted files/devices
-	one now need cryptoloop and aes when using encryption (kernel 2.6)
-
-2004/03/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: add vpi/vci parameters for australia ISPs
-	(#5056)
-
-	* drakxtools.spec: 10-21mdk
-	10-20mdk
-
-2004/03/03  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: mount /sys in case it is useful (and it is for
-	get_usb_storage_info_26())
-
-	* fs.pm: sysfs now exists!
-
-	* detect_devices.pm: fix get_usb_storage_info() on kernel 2.6
-
-	* standalone/drakupdate_fstab: 
-	  - device_name_to_entry() will not fail anymore so that removing a
-	device works
-	  - log calls to drakupdate_fstab
-	  - use "find" instead of "grep" where possible
-
-2004/03/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-20mdk
-
-2004/03/03  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: mount /sys in case it is useful (and it is for
-	get_usb_storage_info_26())
-
-	* fs.pm: sysfs now exists!
-
-	* detect_devices.pm: fix get_usb_storage_info() on kernel 2.6
-
-	* standalone/drakupdate_fstab: 
-	  - device_name_to_entry() will not fail anymore so that removing a
-	device works
-	  - log calls to drakupdate_fstab
-	  - use "find" instead of "grep" where possible
-
-	* crypto.pm: 
-	  - community updates are not in a per-version directory either
-	  - cooker & community urls do contain .../RPMS at the end whereas
-	updates directory do not, handle this
-
-2004/03/03  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Use preferred conf file read/write method. More
-	code reduction/cleaning.
-
-2004/03/03  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: If an HP multi-function device was configured
-	manually, extract the model name from the HPOJ device entry name.
-
-	* printer/main.pm: Let HPOJ device entry be created with the correct
-	printer model name.
-
-2004/03/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: hide dns settings by default when using dhcp
-
-2004/03/02  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2004/03/02  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Fixed HPOJ configuration when manually setting up a
-	device.
-
-2004/03/02  tsdgeos
-
-	* share/po/ca.po: updating
-
-2004/03/02  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: removed lib in PRINTER automatically included via
-	dependencies
-	add major to libsnmp and libsane-hpoj because there are not required by
-	any packages and clean_rpmsrate does not update lib only (only -devel)
-
-2004/03/02  Pixel  <pixel at mandrakesoft.com>
-
-	* crypto.pm: cooker updates are not in a per-version directory
-
-	* any.pm, standalone/drakboot: drakboot --boot is now a wizard
-
-	* diskdrake/interactive.pm: type "ext2:vfat" must not be the same as 0
-
-	* interactive/gtk.pm: small fix when clicking on an empty tree (when
-	allow_empty_list)
-
-2004/03/02  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Sometimes option default settings in the
-	printer options dialog were missing (e. g. "Dithering Pixels Per Inch"
-	in "pcl3" driver). Fixed.
-
-2004/03/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: bump version number
-
-	* any.pm (setupBootloader__general) fix wizard title now that drakboot
-	--boot
-	is a wizard like tool
-
-	* drakxtools.spec: 10-19mdk: last but not least
-	10-19mdk
-
-	* network/isdn.pm: fix doble ISDN detection (#6535)
-
-2004/03/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tl.po: updated pot file
-	updated Filipino file
-	updated pot file
-
-	* share/po/nb.po: updated Norwegian file
-	updated pot file
-	updated pot file
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/fr.po, share/po/ta.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: updated pot file
-	updated pot file
-
-	* network/shorewall.pm: rewrote string to avoid duplication
-
-2004/03/02  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: bugzilla #8133 says "VT8751 [ProSavageDDR P4M266] VGA
-	Controller" (0x5333,
-	0x8d04) has no pb with graphical lilo. So only keeping the restriction
-	for
-	(0x5333, 0x8d03), hoping that's what fpons wanted.
-
-	* crypto.pm: cooker updates are not in a per-version directory
-
-	* any.pm, standalone/drakboot: drakboot --boot is now a wizard
-
-	* diskdrake/interactive.pm: type "ext2:vfat" must not be the same as 0
-
-	* common.pm: better error message on exceptions
-
-	* interactive/gtk.pm: small fix when clicking on an empty tree (when
-	allow_empty_list)
-
-2004/03/02  tbacklund
-
-	* share/po/fi.po: Finnish tranlsation 100% again
-
-2004/03/02  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Sometimes option default settings in the
-	printer options dialog were missing (e. g. "Dithering Pixels Per Inch"
-	in "pcl3" driver). Fixed.
-
-2004/03/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-19mdk: last but not least
-	10-19mdk
-	10-18mdk
-
-	* network/modem.pm: fix modem symlink (#7967)
-
-	* any.pm (setupBootloader__general) fix wizard title now that drakboot
-	--boot
-	is a wizard like tool
-
-	* network/isdn.pm: fix doble ISDN detection (#6535)
-
-	* harddrake/data.pm: bump version number
-
-	* network/netconnect.pm: sync dhcp client with ifup one
-	preselect first availlable dhcp client
-	stricter pci modem matching (purely cosmetic but sanity is always good)
-	fix pci modem type matching
-
-	* bootloader.pm (read) default to lilo if grub config file isn't there
-	(workaround
-	buggy detectloader only checking MBR)
-
-	* share/po/fr.po: update
-
-2004/03/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/uz@Latn.po:
-	updated pot file
-
-	* share/po/tl.po: updated Filipino file
-	updated pot file
-
-2004/03/02  Pixel  <pixel at mandrakesoft.com>
-
-	* share/list: add SecurityPolicy to remove "error opening security policy
-	file" warning
-
-	* install_gtk.pm: fix potential error
-	add SecurityPolicy to remove "error opening security policy file"
-	warning
-
-	* bootloader.pm: if the default bootloader entry is invalid, choose
-	another one
-
-2004/03/02  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	by Reinout van Schouwen <reinout@cs.vu.nl>
-
-2004/03/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-17mdk
-
-	* standalone/logdrake: fix icon name change
-
-	* standalone/drakups: fix wizard icon
-
-2004/03/01  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated translation
-
-2004/03/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po, share/po/uz.po, share/po/nn.po, share/po/uz@Latn.po:
-	updated Norwegian and Uzbek files
-
-2004/03/01  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: remove existing xxx=ide-scsi on upgrades
-
-2004/03/01  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/gimp.pm: Do not configure the GIMP-Print plug-in on more than 50
-	users (bug #6423).
-
-	* printer/printerdrake.pm: Fixed bug #8483: No "ptal:/..." in manual
-	device URI list.
-
-	* scanner.pm, standalone/scannerdrake: Fixed bug #7242: Firmware was not
-	found by "gt68xx" SANE backend.
-
-2004/03/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_steps.pm (upNetwork) log up try and faillures
-
-	* drakxtools.spec: 10-16mdk
-
-2004/03/01  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: use "default.png" instead of (missing) "man.png" which resulted
-	to defaulting to parrot (ic-bird.png)
-
-	* install_steps.pm: remove existing xxx=ide-scsi on upgrades
-
-	* Makefile: fix typo
-
-2004/03/01  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/gimp.pm: Do not configure the GIMP-Print plug-in on more than 50
-	users (bug #6423).
-
-	* printer/main.pm: Fixed bug of installer crashing when an HP
-	multi-function device is detected and set up.
-
-2004/03/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: fix bootproto filling (#8498)
-
-	* install_steps.pm (upNetwork) log up try and faillures
-
-	* detect_devices.pm (getBewan) fix detection
-
-	* standalone/draksec: perl_checker cleanups
-
-	* standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/modem.png: update
-
-2004/03/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt_BR.po: updated Brazilian file
-
-2004/03/01  Pixel  <pixel at mandrakesoft.com>
-
-	* Makefile: we don't need .pod files during install
-	(but why aren't glib & gtk files not listed in share/list ??)
-
-	* install_any.pm: simplify
-
-	* any.pm: use "default.png" instead of (missing) "man.png" which resulted
-	to defaulting to parrot (ic-bird.png)
-
-	* rescue/list, tools/Makefile: adapt to perl packages rebuilt
-
-	* crypto.pm, install_steps_interactive.pm: do not use $o in crypto.pm,
-	pass {distro_type} to mirrors() and bestMirror() instead
-
-2004/03/01  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Removed spurious quotes ('"') from HPOJ config file.
-
-	* printer/printerdrake.pm: Support for new HP multi-function devices and
-	for special needs of Lexmark X125 printer.
-
-2004/03/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (create_packtable) wrap labels by default
-	(Gtk2::WrappedLabel::new) left align labels by default
-
-	* standalone/service_harddrake: do not crash when detector failled (eg:
-	when mouse detection failled because
-	of unhandled exception on module exception b/c of unresolved symbolds
-	b/c of
-	gcc-3.4)
-
-	* standalone/drakconnect: fix bootproto filling (#8498)
-
-	* standalone/draksec: sanitize main explanation text (resizable, weight,
-	margin, ...)
-	prevent pull-down menus to fill availlable space in packtables
-	wrap and left align main options labels
-	do not left align main explanation text
-
-	* drakxtools.spec: 10-15mdk
-
-	* share/po/fr.po: typo fix
-	fix item description (#8507)
-
-	* standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/webcam.png, share/po/br.po,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/modem.png,
-	standalone/icons/harddrake2/keyboard.png: update
-
-2004/02/29  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2004/02/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ar.po: updated po file
-
-	* share/po/nb.po: updated Norwegian file
-
-2004/02/29  reinouts
-
-	* share/po/nl.po: Updated Dutch (nl) translation
-	(small change to test)
-
-2004/02/29  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org's Arabic translation for the
-	past week :-)
-
-2004/02/28  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_any.pm: log reason why getAndSaveFile can't opening dest file
-	for writing
-
-	* share/list: rpmtools and perl-URPM have been rebuilt for perl 5.8.3
-
-	* tools/make_mdkinst_stage2: add a few more inodes to the second stage
-	ramdisk, got bitten by
-	a sucking no space left on device :/ will also print available
-	inodes when creating ramdisk so that we can see if our computing
-	was quite good
-
-	* lang.pm: load_mo: first perform a lookup on mo's for all possible langs,
-	will prevent from downloading each time another time the mo file
-	(fr_FR comes first, is not here, everything including fr gets
-	removed, fr_FR is non-existent, and then fr is downloaded again)
-
-2004/02/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/tl.po: Updated Italian and Filipino files
-
-	* share/po/hi.po: updated Hindi po file
-
-	* share/po/bs.po: updated Bosnian file
-
-2004/02/27  Florin Grad  <florin at mandrakesoft.com>
-
-	* network/shorewall.pm, network/drakfirewall.pm: remove the masq zone and
-	add policies, rules only if there is an interface in loc
-
-2004/02/27  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/02/27  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: when in automatic=disk mode but no partition is
-	given, fall back
-	on non automatic mode evidently
-
-2004/02/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-2004/02/27  tbacklund
-
-	* share/po/fi.po: fully translated again...
-
-2004/02/27  tsdgeos
-
-	* share/po/ca.po: unfuzzying
-
-2004/02/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-14mdk
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ltg.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/nn.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/mn.po, share/po/uk.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, share/po/bs.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/hi.po, share/po/af.po,
-	share/po/az.po, share/po/pt.po, share/po/fr.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/de.po, share/po/tl.po,
-	share/po/eo.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/uz@Latn.po: sync
-
-	* standalone/net_monitor (in_ifconfig) better check ifconfig is executable
-	before running it
-	(-e is not enough)
-
-	* network/netconnect.pm: note that isdn configuration has not yet be
-	ported upon new wizard layer
-	fix crash when modem was not found
-
-2004/02/27  Warly  <warly at mandrakesoft.com>
-
-	* crypto.pm: add $o in global vars.
-	add distro_type variable to select correct updates mirror type
-
-	* install2.pm: add distro_type variable to select correct updates mirror
-	type
-
-	* share/rpmsrate: Try to have some find of better handling for PRINTER
-	flag
-
-2004/02/27  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: when in automatic=disk mode but no partition is
-	given, fall back
-	on non automatic mode evidently
-
-2004/02/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-14mdk
-
-	* standalone/net_monitor (in_ifconfig) better check ifconfig is executable
-	before running it
-	(-e is not enough)
-
-	* network/netconnect.pm: note that isdn configuration has not yet be
-	ported upon new wizard layer
-	fix crash when modem was not found
-
-2004/02/27  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: when in automatic=disk mode but no partition is
-	given, fall back
-	on non automatic mode evidently
-
-2004/02/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-14mdk
-
-	* standalone/net_monitor (in_ifconfig) better check ifconfig is executable
-	before running it
-	(-e is not enough)
-
-	* network/netconnect.pm: note that isdn configuration has not yet be
-	ported upon new wizard layer
-	fix crash when modem was not found
-
-	* standalone/drakvpn: translate some fields
-
-	* share/po/fr.po: a few new translated strings
-	typo fix
-
-2004/02/27  David Baudens  <baudens at mandrakesoft.com>
-
-	* pixmaps/refresh.png: Udpate icon to not display a cuted icon
-
-	* pixmaps/about.png, standalone/printerdrake,
-	pixmaps/about-printerdrake.png: Better layout for PrinterDrake about
-	dialog box
-
-2004/02/27  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/27  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-2004/02/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/af.po: updated Afrikaans and Estonian files
-	updated po files
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/ja.po, share/po/hr.po, share/po/be.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/he.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/ltg.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/tl.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: updated po files
-
-2004/02/27  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix tape backup/restore (#8284)
-
-2004/02/27  tbacklund
-
-	* share/po/fi.po: fully translated again
-
-2004/02/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (set_back_pixmap) export it
-
-	* standalone/net_monitor (in_ifconfig) better check ifconfig is executable
-	before running it
-	(-e is not enough)
-
-	* network/netconnect.pm: fix crash when modem was not found
-
-	* share/po/fr.po: a few new translated strings
-	typo fix
-	update
-
-	* standalone/drakvpn: translate some fields
-
-2004/02/26  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated translation
-
-2004/02/26  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* standalone/drakautoinst, install_any.pm: support two-floppies boot style
-	for replay_install disk as well (not nice at all..)
-
-2004/02/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (Gtk2::Banner::new) add o_otions ref hash parameter, thus
-	enabling to
-	override text position (eg: for mcc about dialog)
-	(set_back_pixmap) split it out of Gtk2::Banner::set_pixmap
-
-	* network/netconnect.pm: 
-	  - never delete up/down scripts
-	  - only write internet service if start at boot requested
-
-	* drakxtools.spec: remove bogus empty line
-	update 10-13mdk changelog
-	10-13mdk
-
-2004/02/26  Warly  <warly at mandrakesoft.com>
-
-	* pkgs.pm: We need the PRINTER flag
-
-2004/02/26  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* standalone/drakautoinst: support two-floppies boot style for
-	replay_install disk as well (not nice at all..)
-
-	* install_any.pm: support two-floppies boot style for replay_install disk
-	as well (not nice at all..)
-	hd.img doesn't exist anymore, using hd_grub.img
-
-	* ugtk2.pm: ask_browse_tree_info_given_widgets: allow for an initial
-	selection if necessary (through toggle_nodes)
-
-2004/02/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tl.po, share/po/he.po: Added Filipino file; updated Hebrew file
-
-2004/02/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: remove bogus empty line
-	update 10-13mdk changelog
-	10-13mdk
-	10-12mdk
-
-	* ugtk2.pm (Gtk2::Banner::new) add o_otions ref hash parameter, thus
-	enabling to
-	override text position (eg: for mcc about dialog)
-	(set_back_pixmap) split it out of Gtk2::Banner::set_pixmap
-	(Gtk2::Banner::new) create only *one* expose event handler
-	(Gtk2::Banner::set_pixmap) stop expose event propagation so that
-	shadows do not accumulate (thus resulting in darker alpha-channel)
-
-	* network/adsl.pm (adsl_conf_backend) install needed packages
-
-	* network/netconnect.pm: 
-	  - never delete up/down scripts
-	  - only write internet service if start at boot requested
-	skip apply_setting step for now since anyway we've already written
-	most config files... (btw, now installer also write cnx type as side
-	effect)
-	reverse debug stuff that should never have been commited
-	typo fix: only write ether config for lan...
-
-2004/02/26  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, printer/data.pm: Fixes for HPOJ setup during
-	installation.
-
-2004/02/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: skip apply_setting step for now since anyway
-	we've already written
-	most config files... (btw, now installer also write cnx type as side
-	effect)
-	reverse debug stuff that should never have been commited
-	typo fix: only write ether config for lan...
-
-	* network/adsl.pm (adsl_conf_backend) install needed packages
-
-2004/02/25  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/compssUsers: Don't install Webmin by default in Download and
-	PowerPack
-
-	* share/compssUsers.powerpack: Don't install Webmin by default in Download
-	and PowerPack
-	compssUsers for 10.0 PowerPack
-
-	* share/compssUsers.server: compssUsers for 10.0 PowerPackPlus
-
-2004/02/25  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/rescue-gui.c: give us more chance to get bootloader write
-	actually commited to
-	disk before reboot
-
-2004/02/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: defined GTK_IM_MODULE values for CJK languages; so xim is used
-	by default for languages for which we don't ship good enough
-	native gtk2 input methods.
-
-	* share/po/he.po: updated Hebrew file
-
-2004/02/25  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Use ATAPI:/dev/hdX for both 2.4/2.6
-	compatibility.
-
-	* standalone/drakTermServ: Really filter symlinked kernels. nohup the dm
-	restart.
-	Don't let any kernel symlinks be visible for making NBIs.
-
-2004/02/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake: when sound card is added/removed, delete
-	current sound levels so that sound
-	service reset it to sg sane
-
-	* harddrake/data.pm: look at sound cards changes on bootstrapping
-
-	* drakxtools.spec (harddrake-ui package) requires sane-backends so that
-	scanner
-	detection works smoothly (#8305)
-	10-11mdk
-
-2004/02/25  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/compssUsers.powerpack: Don't install Webmin by default in Download
-	and PowerPack
-	compssUsers for 10.0 PowerPack
-
-	* share/compssUsers: Don't install Webmin by default in Download and
-	PowerPack
-	compssUsers for 10.0 Download
-
-2004/02/25  Erwan Velu  <erwan at mandrakesoft.com>
-
-	* mdk-stage1/disk.c: Patch from gc to allow booting a MandrakeMove on a
-	Harddrive using the
-	automatic settings.
-
-2004/02/25  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-10mdk
-
-	* harddrake/data.pm: handle webcams managed by pwc driver
-
-	* share/po/fr.po: update
-
-2004/02/25  Warly  <warly at mandrakesoft.com>
-
-	* pkgs.pm: revert my suckinessed / added to prefix
-
-2004/02/25  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/modem.pm: 
-	  - allow writting to another kppprc file
-	  - replace new kppp option values
-
-	* standalone/drakconnect: fix forgotten $::prefix (could I say typo fix ?)
-	  - RTC Modem page shown and pretty okayish
-	  - use '/root/.kde/share/config/kppprc' for any local change
-
-2004/02/25  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/02/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-10mdk
-
-	* harddrake/data.pm: handle webcams managed by pwc driver
-
-	* share/po/fr.po: update
-
-2004/02/24  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/02/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/nn.po, share/po/ja.po,
-	share/po/hr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/mn.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/lt.po, share/po/he.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/ltg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file; added Latgalian
-	file
-
-	* share/po/tr.po: updated Turkish file
-	updated pot file; added Latgalian file
-
-	* share/po/et.po: updated Estonian file
-	updated pot file; added Latgalian file
-
-2004/02/24  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Rework CD recording for ATA device setup.
-
-2004/02/24  tbacklund
-
-	* share/po/fi.po: 100% translated, was 54 fuzzy, 49 untranslated
-
-2004/02/24  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm, standalone/scannerdrake: UI text fixes.
-
-2004/02/24  tsdgeos
-
-	* share/po/ca.po: some more unfuzzyin
-
-2004/02/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/fr.po, share/po/ta.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: merge in typo fixes
-	from tille
-
-	* network/adsl.pm (adsl_conf_backend) alter both
-	/etc/analog/adiusbadsl.conf and
-	/etc/eagle-usb/eagle-usb.conf too when configuring sagemXXX
-
-	* drakxtools.spec: fix changelog
-	10-9mdk
-	10-8mdk
-
-2004/02/24  Warly  <warly at mandrakesoft.com>
-
-	* pkgs.pm: add PRINTER alongside with INSTALL not to duplicate printer
-	related packages into OFFICE
-
-	* share/rpmsrate, share/compssUsers, share/compssUsers.server,
-	share/compssUsers.desktop: Separate printing-related packages from
-	INSTALL to create a new separated PRINTER group and pre-select them if
-	OFFICE compssUser group is selected
-
-2004/02/24  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org's Arabic translation
-
-2004/02/24  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Fix typo
-	Fix typos
-
-	* share/rpmsrate: Update
-
-2004/02/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/ca.po: updated Estonian file
-
-	* share/po/ja.po: updated Japanese file
-
-	* share/po/ms.po: updated Malay file
-
-2004/02/24  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: mknbi-set always wants a kernel version now.
-	Deal with conflicts with msec > 3 and exporting / (use no_root_squash).
-	Always pass a kernel to mkinitrd-net. (Both part of #8216)
-	Add --restart option for terminal-server.
-
-2004/02/24  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/scannerdrake: UI text fixes.
-	Ask user before installing packages.
-
-	* printer/printerdrake.pm: UI text fixes.
-	Give clear warning/error messages if a package installation fails.
-	Let printer model in first-time dialog also be shown if there is no
-	description field in the device ID of the printer.
-
-2004/02/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: fix module lookup for pcmcia cards
-
-	* network/adsl_consts.pm: set default protocol to pppoa for various ISPs
-	update 9telecom entry (Benot Audouard)
-	add encapsulation method for tiscali 512k offer in france
-	fix wrongly inverted encapsulation methods for free isp cnx offers
-	use spanish caracters in spanish isp name (Benot Audouard)
-	fix url (Beno�t Audouard)
-	typo fix
-	typo fix (fcrozat)
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/fr.po, share/po/ta.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: merge in typo fixes
-	from tille
-
-2004/02/24  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org's Arabic translation
-
-2004/02/23  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/nn.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po, share/po/uz@Latn.po: updated pot file
-
-2004/02/23  tsdgeos
-
-	* share/po/ca.po: Some unfuzzying
-
-2004/02/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-2004/02/23  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2004/02/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-	typo fixes (Reinout van Schouwen)
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, diskdrake/interactive.pm, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, diskdrake/hd_gtk.pm, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: typo fixes (Reinout van Schouwen)
-
-	* standalone/drakconnect: misc perl_checker cleanups
-
-	* drakxtools.spec: 10-7mdk
-
-2004/02/23  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* rescue/tree/etc/issue: 10.0
-
-2004/02/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/ethernet.pm: write ethX aliases and ifup/ifdown scripts when
-	configuring a LAN connection
-
-	* standalone/drakconnect (del_intf) keep ethX aliases b/c eg removing eth0
-	will results in eth1 to be
-	renumbered on next boot...
-	(del_intf) down the network interface when deleting it
-	(del_intf) when no network configuration is configured, just report it
-	(del_intf) only list configured interfaces when offering to delete them
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, diskdrake/interactive.pm, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, diskdrake/hd_gtk.pm, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/nn.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/fr.po, share/po/ta.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/bg.po, share/po/cs.po, share/po/uz@Latn.po: typo fixes (Reinout
-	van Schouwen)
-
-	* drakxtools.spec: 10-7mdk
-	10-6mdk
-
-	* network/netconnect.pm: 
-	  - always write up/down scripts
-	  - only write initscript when starting at boot was choosen (instead of
-	writing
-	it in restart path...)
-	write ethX aliases and ifup/ifdown scripts when configuring a LAN
-	connection
-
-	* network/adsl.pm: fix adsl scripts (especially with sagem8xx modems)
-	add missing space
-
-2004/02/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: fix french translation (upcase label)
-
-	* standalone/drakconnect: fix ability to set ip parameters broken by
-	localizing bootproto
-
-	* drakxtools.spec: 10-6mdk
-	10-5mdk
-
-	* network/adsl.pm: fix adsl scripts (especially with sagem8xx modems)
-	add missing space
-	(adsl_conf_backend) speedtouch config need vpi/vci as decimal numbers
-	whereas sagem8xx wants hexa numbers
-
-2004/02/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: do not tag some ata raid controllers as unknown hw
-
-	* share/po/fr.po: fix french translation (upcase label)
-	fix french translation (upcase label)
-
-	* standalone/drakconnect: fix ability to set ip parameters broken by
-	localizing bootproto
-	handle and translate BOOTPROTO
-	read ppp auth method
-	handle new PAP/CHAP method
-	fix untranslated strings
-	do not complain about gateway format when it's not set
-
-	* any.pm (setupBootloader__entries) fix entry editing layout
-
-	* drakxtools.spec: 10-5mdk
-	10-4mdk
-
-	* network/netconnect.pm: handle unknown hardware: enable one to manually
-	load a driver like expert mode
-	in old pre-10.0 wizard
-	enable one to manually choose the serial port to use while configuring
-	modem
-	fix unreachable steps
-	read ppp config earlier and prevent provider choice to overwrite it (but
-	if
-	user select a *new* provider)
-	initialize modem data structure at one point only for serial/PCI modems
-	split kppp config reading into network::modem::ppp_read_conf() in order
-	to be
-	shared with manage interface
-	fix choosing betweeen '' and 'adsl connections when configuring adsl
-	(due to
-	write_cnx_scripts vivificating data structure)
-
-	* modules/interactive.pm (load_category__prompt_for_more) do not list
-	probed category in detected hardware list
-	(load_category__prompt_for_more) show quotes around detected hardware in
-	order
-	to more easily see thems
-
-	* network/modem.pm (ppp_read_conf) really default to dynamic dns, gateway
-	and ip (really fix #7705)
-	misc perl_checker cleanups
-	split kppp config reading into network::modem::ppp_read_conf() in order
-	to be
-	shared with manage interface
-
-	* network/ethernet.pm (conf_network_card_backend) update its doc now that
-	it has been splited in
-	get_eth_cards() and conf_network_card_backend()
-
-	* network/adsl_consts.pm: rollback bogus damien change, here vpi/vci
-	parameters are in hexa, not decimal
-
-	* network/adsl.pm (adsl_conf_backend) speedtouch config need vpi/vci as
-	decimal numbers
-	whereas sagem8xx wants hexa numbers
-
-2004/02/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: do not tag some ata raid controllers as unknown hw
-
-	* standalone/drakconnect: handle and translate BOOTPROTO
-	read ppp auth method
-	handle new PAP/CHAP method
-	fix untranslated strings
-	do not complain about gateway format when it's not set
-
-	* any.pm (setupBootloader__entries) fix entry editing layout
-
-	* network/netconnect.pm: handle unknown hardware: enable one to manually
-	load a driver like expert mode
-	in old pre-10.0 wizard
-	enable one to manually choose the serial port to use while configuring
-	modem
-	fix unreachable steps
-	read ppp config earlier and prevent provider choice to overwrite it (but
-	if
-	user select a *new* provider)
-	initialize modem data structure at one point only for serial/PCI modems
-	split kppp config reading into network::modem::ppp_read_conf() in order
-	to be
-	shared with manage interface
-	fix choosing betweeen '' and 'adsl connections when configuring adsl
-	(due to
-	write_cnx_scripts vivificating data structure)
-
-	* share/po/fr.po: fix french translation (upcase label)
-
-	* modules/interactive.pm (load_category__prompt_for_more) do not list
-	probed category in detected hardware list
-	(load_category__prompt_for_more) show quotes around detected hardware in
-	order
-	to more easily see thems
-
-	* network/modem.pm (ppp_read_conf) really default to dynamic dns, gateway
-	and ip (really fix #7705)
-	misc perl_checker cleanups
-	split kppp config reading into network::modem::ppp_read_conf() in order
-	to be
-	shared with manage interface
-
-	* network/ethernet.pm (conf_network_card_backend) update its doc now that
-	it has been splited in
-	get_eth_cards() and conf_network_card_backend()
-
-	* drakxtools.spec: 10-4mdk
-
-2004/02/22  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated translation
-
-2004/02/22  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl_consts.pm: fix vci number for Belgium and France
-
-2004/02/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nn.po: updated Nynorsk file
-	Added Nynorsk file
-
-	* share/po/cy.po: Added Nynorsk file
-
-2004/02/21  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/21  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/02/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/et.po: updated Estonian and Italian files
-
-2004/02/21  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Verify user has selected a cron interval and
-	media [Bugzilla 8138]
-	More code reduction.
-
-2004/02/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-
-2004/02/20  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: QA - tweak wizard setup.
-
-2004/02/20  tsdgeos
-
-	* share/po/ca.po: Some updates and unfuzzying
-
-2004/02/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: when one refuse to install firmware *now*, she
-	won't be able to select
-	a provider, thus vci and vpi parameters won't be filled
-	remove useless "next" field (since post already handle it)
-
-	* standalone/logdrake: fix title when run from mcc (#8111)
-
-	* drakxtools.spec: 10-3mdk
-	10-2mdk
-
-	* detect_devices.pm (getBewan) introduce it in order to detect Bewan ADSL
-	modems (both PCI
-	and USB ones)
-
-	* share/po/fr.po: update
-
-2004/02/20  tsdgeos
-
-	* share/po/ca.po: Some updates and unfuzzying
-
-2004/02/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm (getBewan) introduce it in order to detect Bewan ADSL
-	modems (both PCI
-	and USB ones)
-	(getSagem) lookup sagem8xx modems by module rather than relying on
-	strings
-	manually added to ldetect-lst
-
-	* standalone/drakperm: fix "current" checkbox vs "group" and "user"
-	pull-down menus
-
-	* standalone/logdrake: fix title when run from mcc (#8111)
-
-	* network/netconnect.pm: when one refuse to install firmware *now*, she
-	won't be able to select
-	a provider, thus vci and vpi parameters won't be filled
-	remove useless "next" field (since post already handle it)
-	enable to refuse network restarting
-
-	* drakxtools.spec: 10-3mdk
-	10-2mdk
-
-2004/02/20  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: keep provider vpi/vci settings when exist
-
-2004/02/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-
-	* lang.pm: uim-anthy works ok in on-the-spot mode with KDE
-
-2004/02/20  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm (update_for_renumbered_partitions):
-	  - handle no grub config
-	  - skip modifications when dev2grub fail
-	(since the device not in device.map means the device is currently unused
-	for booting)
-
-	* modules.pm, install_steps.pm: alias agpgart should be only for 2.6,
-	since code doesn't allow this easily,
-	adding the agp module to modprobe.preload
-
-2004/02/20  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Shrink code per Thierry.
-
-2004/02/20  tsdgeos
-
-	* share/po/ca.po: Some updates and unfuzzying
-
-2004/02/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect (add_intf) no need to handle errors, it's done by
-	callee now in order to share
-	exception handling with installer
-
-	* drakxtools.spec: 10-2mdk
-
-	* network/adsl_consts.pm: remove debug statement
-	aliase Free non d�group� 1024/256 on "Free non d�group� 512/128" (#7615)
-
-	* standalone/drakperm: fix "current" checkbox vs "group" and "user"
-	pull-down menus
-
-	* network/netconnect.pm: enable to refuse network restarting
-	do not detect lan interfaces when configuring modems
-	do not horribly die at install time on error
-	really fix previous button on first step: we want it at install time
-
-	* detect_devices.pm (getSagem) lookup sagem8xx modems by module rather
-	than relying on strings
-	manually added to ldetect-lst
-
-2004/02/20  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/02/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: uim-anthy works ok in on-the-spot mode with KDE
-
-2004/02/20  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix warning LSB chosen implies kernel 2.4
-
-	* fs.pm: add umask=0022 capability, and use it for security level 3
-
-	* share/compssUsers, share/compssUsers.server: Gnome is no good, GNOME is
-	good
-
-	* bootloader.pm (update_for_renumbered_partitions):
-	  - handle no grub config
-	  - skip modifications when dev2grub fail
-	(since the device not in device.map means the device is currently unused
-	for booting)
-
-	* modules.pm, install_steps.pm: alias agpgart should be only for 2.6,
-	since code doesn't allow this easily,
-	adding the agp module to modprobe.preload
-
-2004/02/20  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Shrink code per Thierry.
-
-2004/02/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: remove debug statement
-	aliase Free non d�group� 1024/256 on "Free non d�group� 512/128" (#7615)
-
-	* network/adsl.pm: fix writing aliases (fix broken speedtouch)
-
-	* drakxtools.spec: 10-1mdk
-
-2004/02/20  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* interactive/gtk.pm, install_gtk.pm, ugtk2.pm: don't force buttons a size
-	related to $::windowwidth since this is no more used to size the main
-	window (fixes missing Next button in vgahi), use a global
-	$::real_windowwidth for sizings related to the main window
-
-	* mdk-stage1/Makefile: 10.0
-
-	* install_steps_gtk.pm: don't force buttons a size related to
-	$::windowwidth since this is no more used to size the main window (fixes
-	missing Next button in vgahi), use a global $::real_windowwidth for
-	sizings related to the main window
-	allow to specify the Xnest wanted resolution with --vga
-
-2004/02/20  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix warning LSB chosen implies kernel 2.4
-
-	* fs.pm: add umask=0022 capability, and use it for security level 3
-
-	* share/compssUsers, share/compssUsers.server: Gnome is no good, GNOME is
-	good
-
-2004/02/20  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Gnome icon order. Drop an unused button box.
-
-2004/02/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-0.21mdk
-
-2004/02/19  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2004/02/19  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm, ugtk2.pm: use $ugtk2::current_window in place of
-	@interactive::objects (which was unused and broken)
-	=> fix XSetInputFocus (bugzilla #8046 and #8053)
-
-2004/02/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: since no PCMCIA cards support link status
-	notification, ifplugd should
-	be disabled for all pcmcia cards by default => let blacklist them
-	(#8031)
-
-	* standalone/drakvpn: fix string
-
-	* share/po/fr.po: update
-
-2004/02/19  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2004/02/19  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Update
-
-2004/02/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: value of XIM is the xim identifier, not the xim program name
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-
-2004/02/19  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm, ugtk2.pm: use $ugtk2::current_window in place of
-	@interactive::objects (which was unused and broken)
-	=> fix XSetInputFocus (bugzilla #8046 and #8053)
-
-2004/02/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakvpn: consolidate strings
-
-2004/02/19  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Update
-	Revert my mistake
-
-	* share/advertising/dwd-01.pl: Add missing string
-
-2004/02/19  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm: put a Previous button on the first page
-
-2004/02/19  Florin Grad  <florin at mandrakesoft.com>
-
-	* network/ipsec.pm: add plenty of help explanations, add anonymous support
-	in sainfo
-
-	* standalone/drakvpn: add plenty of help files, add anonymous support for
-	sainfo
-
-2004/02/19  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_steps.pm: add utf8 key to locale config if not already present,
-	so that
-	auto install behave as before (pixel)
-
-	* http.pm: well, value is not dropped anymore perl checko
-	  - don't resolv host, it breaks virtual servers configs
-	  - log when we don't receive a 200
-
-2004/02/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: value of XIM is the xim identifier, not the xim program name
-
-	* standalone/drakvpn: fixed typos
-
-2004/02/19  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/XFdrake: no more global icon in XFdrake
-
-	* install_steps_gtk.pm: the text we give to set_markup should not contain
-	raw "&"
-	(occurs for "Any PS/2 & USB mice")
-
-	* interactive/gtk.pm: don't have a big scrolled window that can be around
-	a local scrolled window.
-	ensure instead many local scrolled windows
-
-	* share/rpmsrate: 
-	  - kimdaba must be flagged KDE
-	  - lower some packages rates for my tests
-	kdenlive must be flagged KDE
-
-	* tools/make_mdkinst_stage2: catch kernel 2.6 loop bug
-
-	* install_steps_interactive.pm: better logging
-
-	* ugtk2.pm: we don't need warp_text since we have WrappedLabel
-	fix _ask_file (tested in wizard, normal and embedded)
-	fix titi sucks (Advanced and Help were broken)
-
-2004/02/19  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix issue with multisession CDs (Anthill #349)
-
-2004/02/19  tsdgeos
-
-	* share/po/ca.po: Today's work
-
-2004/02/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: only show "previous" button on first step in
-	install; in standalone
-	mode, we already have the "cancel" button
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/cs.po, share/po/uz@Latn.po: typo fix
-
-	* share/rpmsrate: uim won't work without uim-applet
-
-	* standalone/drakvpn: consolidate strings
-	typo fix
-
-	* printer/main.pm (set_usermode) do not die when run with --testing as
-	user
-
-	* drakxtools.spec: 10-0.20mdk
-
-	* lang.pm: switch japanese from kinput2 to uim input method
-
-2004/02/19  Warly  <warly at mandrakesoft.com>
-
-	* standalone/drakboot: Apply Olivier Blin patch to fix theme displaying
-	under console
-
-2004/02/18  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2004/02/18  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Advertisements: update translations for download
-
-2004/02/18  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: drop $netc->{internet_cnx} test, unnedeed
-
-	* standalone/drakconnect: 
-	  - add adsl_atboot() to check at boot status
-	  - use it instead of chk_internet()
-
-2004/02/18  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/02/18  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_steps.pm, any.pm, lang.pm: selectlanguage: utf8 flag status is
-	updated when user selects more/less languages; when user touches it,
-	update is disabled, allowing andrej to have an en_GB + ru_RU install
-	without utf8
-
-2004/02/18  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: HACK: set LD_ASSUME_KERNEL so that rpm doesn't try to use
-	tls (which we don't
-	have at install) otherwise it causes *weird* problems in __db*. When
-	LD_ASSUME_KERNEL is set, no __db* are used, and so no such pbs.
-
-	* fsedit.pm, partition_table.pm: type 0x17 *can* be ntfs, assuming it is
-	when we don't care much, and check if it is ntfs otherwise
-
-2004/02/18  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: QA - Encourage user to finish configuring media
-	before leaving wizard.
-	Rework backupignore behavior (Anthill #306).
-
-2004/02/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, standalone/drakvpn, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/fr.po, share/po/ta.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: typo fix
-
-	* network/netconnect.pm: do not use ifplugd on wireless connections by
-	default
-	fix "network needs to be restarted" step
-	do not overwrite current wireless parameters with default values
-	move some wireless options as advanced ones
-
-	* drakxtools.spec: 10-0.19mdk
-
-	* standalone/harddrake2 (quit_global) do not die in exit path when not run
-	as root
-	reindent button packing
-	sanitize buttons layout when embedded
-
-2004/02/18  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Install Google's search bar when KDE is installed
-
-2004/02/18  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: drop $netc->{internet_cnx} test, unnedeed
-
-	* standalone/drakconnect: fix adsl at boot, better and more clean
-
-2004/02/18  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: Pull xine-arts when choosing video AND KDE
-
-2004/02/18  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/mn.po, share/po/uk.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/fr.po,
-	share/po/ta.po, share/po/vi.po, share/po/nl.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/advertising/dwd-09.pl, share/po/uz@Latn.po: fix wording of
-	advertisement thx to austin
-
-	* tools/shift_img.c, tools/shift_all.pl: these files I needed when pablo
-	gave me lang-*.png images because they were not aligned.. commiting in
-	case
-
-	* install_any.pm: ok, ok, perl checker roulaize
-	better match
-	tentatively fix #7792 (seems like line number don't match #7792,
-	but this one I'm fixing was obviously wrong, at least)
-	allow using ext2 or vfat floppies for kickstart=floppy so that
-	when you do an auto install based on network.img and
-	network_drivers.img, you can put your auto_inst.cfg.pl on
-	network_drivers.img and rock n roll
-
-	* mdk-stage1/modules.c: support automatic installs even when needing the
-	additional drivers floppy
-
-	* modules.pm: don't log insmod errors on tty5, rather on tty3+ddebug.log
-	as normal log
-
-2004/02/18  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_gtk.pm: when cancel is pressed, fix re-selecting
-	unselected packages
-	(callback_choices unneeded, cf rpmdrake)
-	small cleanup
-
-	* install2.pm: HACK: set LD_ASSUME_KERNEL so that rpm doesn't try to use
-	tls (which we don't
-	have at install) otherwise it causes *weird* problems in __db*. When
-	LD_ASSUME_KERNEL is set, no __db* are used, and so no such pbs.
-
-	* fsedit.pm, partition_table.pm: type 0x17 *can* be ntfs, assuming it is
-	when we don't care much, and check if it is ntfs otherwise
-
-	* standalone/diskdrake: set useSupermount to magicdev (so that it doesn't
-	use supermount from cdroms)
-
-	* share/rpmsrate: gdm is an important gnome application, make it 5 (for my
-	tests)
-
-2004/02/18  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Rework backupignore behavior (Anthill #306).
-
-2004/02/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (create_okcancel) enable to specify that some buttons must be
-	at right
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, standalone/drakvpn, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	share/po/fa.po, share/po/id.po, share/po/ru.po, share/po/br.po,
-	share/po/sl.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/mn.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/tg.po, share/po/bs.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/hi.po, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/fr.po, share/po/ta.po, share/po/vi.po,
-	share/po/nl.po, share/po/de.po, share/po/eo.po, share/po/bg.po,
-	share/po/cs.po, share/po/el.po, share/po/uz@Latn.po: typo fix
-
-	* standalone/drakconnect: force apply button to be right aligned
-
-2004/02/17  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: manage interfaces don't want to break cnx_scripts
-
-	* standalone/drakconnect: 
-	  - add chk_config() to test internet service state
-	  - adsl onboot using chk_config()
-
-2004/02/17  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c, mdk-stage1/modules.h: support
-	2.6 insmoding for expert third party modules and loading named modules
-
-	* Xconfig/card.pm: well we reverted to 4.3
-
-2004/02/17  tsdgeos
-
-	* share/po/ca.po: today's updates
-
-2004/02/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm: enforce gnome button order everywhere (interface team request)
-
-	* drakxtools.spec: log one more stuff into 10-0.18mdk
-	fix changelog
-	10-0.18mdk
-
-	* standalone/icons/wiz_default_up.png: new default icon for wizards
-
-2004/02/17  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/17  Florin Grad  <florin at mandrakesoft.com>
-
-	* network/ipsec.pm: one can now start from scratch with ipsec.conf
-	fix the ";" mark in the Security Policies Section
-
-	* standalone/drakvpn: one can now start an ipsec.conf file from scratch
-	add the ask_info3 function
-
-2004/02/17  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/frontend-common.c,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: when available,
-	always load usb interface, as soon as possible, should help usb mouse
-	detection in stage2 which otherwise timeouts
-
-2004/02/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/mn.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/lt.po, share/po/he.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/nb.po,
-	share/po/bs.po, share/po/uz.po, share/po/ro.po, share/po/mk.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/hi.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/nl.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/hu.po,
-	share/po/uz@Latn.po: updated pot file
-
-2004/02/17  Pixel  <pixel at mandrakesoft.com>
-
-	* mouse.pm: detection defaults on automatic choices
-	fix mouse detect() on kernel 2.4
-
-	* bootloader.pm: remove bad entries after reading existing conf file
-	log where the bootloader is installed
-
-	* interactive/newt.pm: don't have a scroll inside a scroll which causes
-	display pbs.
-	alas it doesn't fix the "Tab" navigation when having a global scroll + a
-	Listbox. You have to use the right arrow to exit the Listbox
-
-2004/02/17  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Added warnings to clearly tell the user when
-	there is no network access.
-	Removed printer list button whenthere is no network also in expert mode.
-
-	* printer/detect.pm: Fixed problem that not used parallel ports were
-	detected as printers.
-
-2004/02/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/icons/drakfont.png, standalone/drakfont,
-	standalone/icons/drakfont.620x57.png: switch drakfont to new banner
-	style
-
-	* harddrake/data.pm: really fix doble blanked ISDN detection
-
-	* share/po/Changelog: kill no more used file
-
-	* standalone/drakvpn (ask_info3) really use parameters...
-	consolidate strings
-
-	* share/po/fr.po: update
-
-	* network/netconnect.pm: sort lan protocols
-
-	* drakxtools.spec: fix changelog
-	10-0.17mdk
-
-2004/02/16  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Nothing special
-	Partially updated file
-
-2004/02/16  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: move check_field's ask_warn() to save_notebook()
-	check gateway entry
-
-2004/02/16  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/16  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakvpn: do not test the translated chains anymore
-
-2004/02/16  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/url.c: fix buggy redhat code exhausted only in -Os which
-	corrupted
-	memory and gave wrong results for download file size in FTP/HTTP
-	installs
-
-2004/02/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* network/netconnect.pm, standalone/drakvpn, standalone/drakboot: typo
-	fixes
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-	updated pot file
-
-	* network/ipsec.pm: removed N() around of a non-translatable string
-
-2004/02/16  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: keep current authentication kind, even if
-	not completly accepted
-	network::shorewall::read without silent is nasty, since it doesn't only
-	read,
-	it prompts the user. So each time the summary updates the data, it
-	prompts
-	(when you have more than one card and no firewall configured)
-
-	* authentication.pm: keep current authentication kind, even if not
-	completly accepted
-
-2004/02/16  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/detect.pm: Recognize parallel printers also when they miss the
-	"CLASS:PRINTER;" in their device ID string (ex: Brother HL-720, bug
-	#7753).
-
-2004/02/16  tsdgeos
-
-	* share/po/ca.po: Today's worjk
-
-2004/02/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakpxe, standalone/drakgw: do not abuse global namespace
-
-	* network/netconnect.pm: fix automatically found "...2" dns when network
-	is done
-	show a more precise error messages when no wireless cards were found
-	eagle was renamed as eagle-usb
-	minor poulpe cleanup
-	explain about DNS (#7908)
-
-	* standalone/drakclock: let's look better when embedded
-
-	* standalone/drakvpn (ask_info2) list valid values in a pull-down menu
-	(ask_info2) introduce it in order to share one more step
-	(ask_info) introduce it in order to share some code
-	PFS group only accept 3 distinct values
-	more user friendly labels
-	do not list twice the same elements in list...
-	try to have better names
-	do not put " = " in translated messages
-	add hints
-	do not abuse global namespace
-
-	* standalone/drakautoinst: typo fix
-	do not abuse global namespace
-
-	* authentication.pm (to_kind) try harder to find out if some auth method
-	already had been choosed
-
-	* share/po/fr.po: update
-	beautify string
-
-	* install_steps_interactive.pm (setRootPassword) do not reset auth method
-	when pressing "previous" in next step
-
-2004/02/16  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/list: Removed on Pixel's request (will use list-dwd
-	instead)
-
-	* share/rpmsrate: Add kolab-server in GROUPWARE
-
-	* share/compssUsers.server: Select Groupware by default
-
-2004/02/16  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: add in %pkgs::preferred the kernel-source corresponding to the
-	preferred kernel
-
-	* ugtk2.pm: during install, "Ok" is on the right, like gnome not kde
-
-	* share/advertising/Makefile: get the list of files needed from
-	list-PRODUCT
-
-2004/02/15  tsdgeos
-
-	* share/po/ca.po: more updates
-
-2004/02/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-0.16mdk
-
-	* harddrake/data.pm: typo fix :-)
-
-2004/02/15  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org's Arabic translation
-
-2004/02/14  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/02/14  keld
-
-	* share/po/nb.po: Updates
-	gi/perl-install/share/po/nb.po
-	Updates. I could just as well update the Norwegian version
-	as I wanted to use this as base for my Danish translation.
-	gi/perl-install/share/po/nb.po
-
-	* share/po/da.po: Updates
-	soft/wizard_perl/po/da.po gi/perl-install/share/po/da.po
-	Updates
-	soft/control-center/po/da.po soft/drakfax/po/da.po
-	soft/ftw/po/da.po soft/mdkonline/po/da.po
-	soft/rfbdrake/po/da.po soft/rpmdrake/po/da.po
-	soft/urpmi/po/da.po gi/perl-install/share/po/da.po
-
-2004/02/14  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: FTP restore failure feedback. Allow multiple
-	catalog/file restore selection.
-
-2004/02/14  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, printer/data.pm: Let printerdrake load the "usblp"
-	instead of the "printer" kernel module if kernel 2.6.x is used.
-
-	* printer/printerdrake.pm: Made printerdrake handling even very weird
-	printer ID strings, as the one of the Brother HL-720 with empty
-	manufacturer and description fields (Bug #7753).
-
-	* printer/detect.pm: Recognize also "SN:" as serial number field in
-	printer ID string (HP PhotoSmart 7760, bug #6534).
-	Let printerdrake load the "usblp" instead of the "printer" kernel module
-	if kernel 2.6.x is used.
-
-2004/02/14  tsdgeos
-
-	* share/po/ca.po: Small updates to catalan translations
-
-2004/02/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-0.15mdk
-
-	* network/netconnect.pm: fix automatically found "...2" dns
-
-	* harddrake/data.pm: fix ISDN detection (#6535)
-	filter out devices to prevent them to appear several times in device
-	tree (#4906)
-
-	* network/isdn.pm (isdn_detect_backend) try harder to detect ISDN devices
-
-	* standalone/harddrake2: break devices loop into two pass:
-	  - first detect devices into each class
-	  - then process them for later display
-
-	* network/tools.pm: fix crash on canceling "already configured net device"
-	configuration (#7679)
-
-2004/02/13  Pixel  <pixel at mandrakesoft.com>
-
-	* modules/interactive.pm: don't have a wait_message above another empty
-	wait_message when probing hardware
-
-	* ugtk2.pm: use center-on-parent for popped windows
-
-	* share/list: perl-MDK-Common has been rebuilt
-
-2004/02/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm: do not try setting transcient hint when embedded
-
-	* network/netconnect.pm: by default do not start connection at boot for
-	modems (#7705)
-
-	* drakxtools.spec: 10-0.14mdk
-
-	* wizards.pm: enable default value to be dynamically computed
-	enable to pass untranslated defaut to yes/no or ok/cancel like
-	questions by translating value at runtime
-	default to next/finish when no field is present
-	add 'default' field in order to be able to enforce default answer for
-	yes/no like questions or when data does not conatains any fields
-	(needed for last #7705 bit)
-	missing #7593 bit
-	use interactive->ask_okcancel in order to not have spurious field in
-	text mode (#7593)
-
-2004/02/13  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: forgotten modem page, to be traduced, not yet
-	usable (please don't hurt me)
-
-2004/02/13  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: add a warning when choosing security level
-	> 2 and having a windows partition
-	(since in that case we won't have umask=0) (bugzilla #4731)
-
-	* modules/interactive.pm: don't have a wait_message above another empty
-	wait_message when probing hardware
-
-	* ugtk2.pm: use center-on-parent for popped windows
-
-	* share/list: perl-MDK-Common has been rebuilt
-
-	* bootloader.pm: fix reading grub config (esp. when /boot is a separate
-	partition)
-	(nb for titi: join($xx, $yy) is *not* useful)
-
-	* install2.pm: in boolean context, "any" is better than "find"
-
-2004/02/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-0.14mdk
-
-2004/02/13  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Fix </b> in advertiesment #5
-
-	* share/advertising/drweb.pl, share/advertising/list-dwd,
-	share/advertising/list-dis, share/advertising/list-ppp,
-	share/advertising/drweb.png, share/advertising/list-pwp,
-	share/advertising/list: 
-	  - Add DRWeb's advertisement
-	  - Add list for each version
-
-2004/02/13  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm: 
-	  - do not flush /etc/sysconfig/drakconnect with an empty hash
-	  - move $offer_to_connect after %adsl_devices declaration (fix typo?)
-	s/$config/$p/ for drakconnect conf file
-
-	* standalone/drakconnect: forgotten modem page, to be traduced, not yet
-	usable (please don't hurt me)
-	  - nice ethernet names back
-	  - fix adsl via ethernet bug
-	  - fix apply settings bug
-	  - fix and shrink sub apply
-	  - drop $gui and $config
-	  - add new hash style $p
-
-2004/02/13  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* modules.pm: fix deps problem because of 2.4/2.6 mappings, better support
-	2.4 and 2.6 alltogether by keeping 2.4 names in modules.conf
-
-2004/02/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-
-	* share/advertising/dwd-09.pl: USE ASCII OR UTF-8 ONLY; **DON'T** USE
-	ISO-8859-1!
-
-2004/02/13  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: add a warning when choosing security level
-	> 2 and having a windows partition
-	(since in that case we won't have umask=0) (bugzilla #4731)
-
-	* modules/interactive.pm: don't have a wait_message above another empty
-	wait_message when probing hardware
-
-	* bootloader.pm: fix reading grub config (esp. when /boot is a separate
-	partition)
-	(nb for titi: join($xx, $yy) is *not* useful)
-	try hard to update_bootloader_for_renumbered_partitions()
-	create read_grub_device_map()
-
-	* install2.pm: in boolean context, "any" is better than "find"
-	  - have usb-storage as a scsi_hostadapter by default
-	  - remove it if unneeded for normal boot (cf comment in the code)
-
-	* modules.pm: 
-	  - have usb-storage as a scsi_hostadapter by default
-	  - remove it if unneeded for normal boot (cf comment in the code)
-
-	* diskdrake/interactive.pm: try hard to
-	update_bootloader_for_renumbered_partitions()
-
-	* mdk-stage1/init.c: sleep 10 only when debugging
-
-	* interactive.pm: no need for this
-
-2004/02/13  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix QA reports of crash on file search, failure
-	to report ftp error.
-
-2004/02/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-	update
-
-	* standalone/icons/printerdrake.png, standalone/icons/drakgw.png,
-	standalone/icons/scannerdrake.png, standalone/icons/drakvpn.png,
-	standalone/icons/drakfirewall.png,
-	standalone/icons/wiz_scannerdrake.png, standalone/drakpxe,
-	standalone/icons/wiz_firewall.png, pixmaps/printerdrake.png,
-	standalone/icons/wiz_drakvpn.png, standalone/drakgw,
-	standalone/icons/logdrake.png, standalone/icons/wiz_printerdrake.png,
-	standalone/icons/wiz_drakgw.png, standalone/icons/wiz_logdrake.png,
-	standalone/icons/wiz_drakconnect.png, standalone/icons/drakconnect.png,
-	printer/printerdrake.pm: new banner icons
-
-	* standalone/harddrake2: do not force black color for fields values, this
-	badly conflict with
-	inverted accessibility themes
-	remove statusbar on interface team request
-
-	* network/netconnect.pm: new banner icons
-	offer_to_connect: fix indentation
-
-	* harddrake/data.pm: only look for local printers (do not perform heavy
-	network probe)
-
-	* modules.pm: handle wireless modules
-
-	* standalone/drakconnect: new banner icons
-	remove useless comment
-	new banner icons
-
-	* ugtk2.pm (create_scrolled_window) add relief for TreeViews too
-	(interface team
-	request)
-	(new) simplify WizardTable
-	(Gtk2::Banner->new) fix default banner size
-	(new) use new Gtk2::Banner object for banner
-	remove uneeded variable
-	(Gtk2::Banner) move that widget from mcc into ugtk2 so that all tools
-	can reuise it for their banners
-
-	* interactive.pm (vnew) do not complaint about being run as root when
-	--testing was passed
-
-	* drakxtools.spec: 10-0.14mdk
-	10-0.13mdk
-
-	* Makefile.config: add drakvpn
-
-	* standalone/drakvpn: verbs must be upcased on buttons!!!
-	new banner icons
-
-2004/02/12  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: in get_kernels_and_labels():
-	  - change internal data structure
-	  - change regexp matching kernel names (was broken for
-	2.4.25-0.pre7.3mdk)
-	  - default to kernel 2.4 when lsb is installed
-
-2004/02/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm (new) simplify banner rendering, make it cpu lighter
-
-	* network/netconnect.pm: ask isp for ip and gateway by default (#7705)
-
-	* standalone/drakclock (DrawPointAt) simplify draw_points call
-
-2004/02/12  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/dwd-09.pl: Update text to reflect reality
-
-2004/02/12  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: fix ethernet and adsl conflict in menu
-
-2004/02/12  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakvpn: hopefuly better interface
-
-2004/02/12  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c, mdk-stage1/tools.c: try to
-	detect regular floppy drives
-
-	* mdk-stage1/Makefile.common: linux/fd.h is too broken to compile with -W
-	:(
-
-	* install2.pm: i810fb on 2.6 needs intel-agp module, doesn't like hwcur
-	and xcon parameters
-
-2004/02/12  Pixel  <pixel at mandrakesoft.com>
-
-	* authentication.pm: 
-	  - install ldap packages *before* doing ldapsearch
-	  - pam*.so modules do not have /lib/security/ prefix anymore
-
-	* Makefile: add rule dont_run_directly_stage2
-
-	* devices.pm: add input/mice
-
-	* install_any.pm: change return type of pkgs::packages2kernels()
-	add kernel-2.4* in group LSB
-
-	* bootloader.pm: in get_kernels_and_labels():
-	  - change internal data structure
-	  - change regexp matching kernel names (was broken for
-	2.4.25-0.pre7.3mdk)
-	  - default to kernel 2.4 when lsb is installed
-
-	* do_pkgs.pm, pkgs.pm: change return type of pkgs::packages2kernels()
-
-	* standalone/icons/wiz_drakvpn.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* Xconfig/card.pm: handle case where rpm can't be found (eg: XFree86-SVGA
-	for xfree3) (part of bugzilla #7786)
-
-	* install_steps_interactive.pm: warn that selecting LSB means having 2.4
-	by default
-
-2004/02/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: fix driver blacklist
-
-	* drakxtools.spec: fix changelog
-	10-0.12mdk
-	10-0.11mdk
-
-	* ugtk2.pm (new) simplify banner rendering, make it cpu lighter
-
-	* standalone/drakclock (DrawPointAt) simplify draw_points call
-
-	* network/netconnect.pm: ask isp for ip and gateway by default (#7705)
-	do use the actual user's answer
-	preselect right protocol for ethernet though connections
-	fix step linking with ask_connect_now and restart steps:
-	  - fix check for restart step
-	  - only offer to connect now for ppp connections
-	fix module retrieving when configuring an adsl connection over ethernet
-	sort ADSL protocols according to locale
-	fix adsk over ethernet through dhcp protocol
-
-	* share/po/fr.po: update
-
-2004/02/12  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/ppp-07.pl, share/advertising/dis-11.pl,
-	share/advertising/dis-10.pl, share/advertising/ppp-11.pl,
-	share/advertising/ppp-10.pl, share/advertising/dis-05.pl,
-	share/advertising/ppp-09.pl, share/advertising/ppp-04.pl,
-	share/advertising/pwp-04.pl, share/advertising/pwp-10.pl,
-	share/advertising/dis-07.pl, share/advertising/pwp-08.pl,
-	share/advertising/dis-04.pl, share/advertising/pwp-09.pl: Final versions
-	for MDK 10.0
-
-2004/02/12  Pixel  <pixel at mandrakesoft.com>
-
-	* Makefile: add rule dont_run_directly_stage2
-
-	* install2.pm: replace unless with if
-
-	* mouse.pm: more cleanup
-	new 'Universal|Any PS/2 & USB mice' mouse name usable with kernel 2.6
-	rename mouseconfig() with detect_serial() which is what it really does!
-	create probe_wacom_devices() and cleanup
-	cleanup
-	cleanup
-	remove deprecated comment
-	always use fast_mouse_probe (probing serial is now mostly deprecated,
-	and it
-	is *re-done* by drakconnect, so no need to do it soon)
-	cleanup wacom detection
-
-	* devices.pm: add input/mice
-
-2004/02/12  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Restore title banner.
-
-	* standalone/drakbackup: Address some QA issues with restores.
-	Cleanup screen layout in restore screen.
-	Restore title banner.
-
-2004/02/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: sort ADSL protocols according to locale
-	fix adsk over ethernet through dhcp protocol
-	simplify adsl protocol choosing through format callback
-
-	* drakxtools.spec: 10-0.11mdk
-
-	* harddrake/data.pm: detect more webcams
-
-2004/02/11  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/icons/wiz_drakvpn.png: first shy attempt
-
-	* network/ipsec.pm: fix the perl_checker errors
-	remove debugging print commands
-	first shy attempt
-
-	* standalone/drakvpn: typo errors
-	fix the perl_checker errors
-	remote debugging print commands
-	first shy attempt
-
-2004/02/11  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/02/11  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/probing.c: be sure to load usb-storage after SCSI adapters,
-	so that they are in
-	same order than reboot, so that naming is the same
-	don't insmod usb-storage the soonest, we can end up mixing scsi devices
-	orders at reboot time, do it only when needed
-
-2004/02/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-	* share/po/cy.po: updated Welsh file
-
-2004/02/11  Pixel  <pixel at mandrakesoft.com>
-
-	* tools/hd_grub.cgi: adding hdd .. hdh
-	initial version
-
-2004/02/11  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Rearrange main buttons (jmdault -
-	http://advx.org/docs/ice3.png)
-	Disable title banner for now (Bugzilla 7564).
-	Don't assume eth0, rework subnet/netmask for hosts.allow (jmdault).
-
-	* standalone/drakbackup: Disable title banner for now (same as Bugzilla
-	7564, just not reported yet).
-
-2004/02/11  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2004/02/11  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: Add smb4k to replace LinNeighborhood (Buchan Milnes
-	suggestion), decrease LinNeighborhood to 3.
-	raise mc from 3 to 4 in FILE_TOOLS
-
-2004/02/10  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - isdn and modem are fetched from $intf
-	  - drop useless @all_cards
-	  - 'ath' and 'wlan' cards fix
-
-2004/02/10  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/10  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/02/10  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/probing.c: fake usb floppies detection by looking at blocks
-	size of scsi disk devices, 1048575 is for 2.4 and 1440 for 2.6
-
-	* mdk-stage1/mount.c: in network mode we need to create nodes as well
-	because of usb floppies support
-
-	* mdk-stage1/tools.c, mdk-stage1/tools.h: floppy_device returns first
-	floppy device, look for medias first in case of usb floppies (maybe ide
-	floppies also? never tested) then regular floppy drive
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c: use floppy_device rather than
-	/dev/fd0 because we now support usb floppies as well
-
-2004/02/10  Pixel  <pixel at mandrakesoft.com>
-
-	* share/keymaps.tar.bz2: update
-
-	* tools/serial_probe/serial.c: fix serial probe not detecting legacy mice
-
-	* install_steps.pm, detect_devices.pm, any.pm: no need to fake scsi for
-	ide anymore (hopefully!)
-
-2004/02/10  tsdgeos
-
-	* share/po/ca.po: Updates, unfuzzying and spell checking
-
-2004/02/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* security/msec.pm (apply_checks) reindent
-	(apply_checks) fix unable to save checks when config file is empty
-	(aka substInFile does not support using print in that case)
-
-2004/02/10  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/pwp-05.pl, share/advertising/dis-11.pl,
-	share/advertising/ppp-11.pl, share/advertising/dwd-02.pl,
-	share/advertising/dis-09.pl, share/advertising/ppp-09.pl,
-	share/advertising/pwp-04.pl, share/advertising/dis-04.pl,
-	share/advertising/pwp-06.pl, share/advertising/dwd-09.pl: Update
-
-	* share/advertising/dwd-06.pl: Update
-	Update
-
-2004/02/10  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - add 'ath' and 'wlan' to ethernet kind
-	  - use regexp once
-
-2004/02/10  fwang
-
-	* share/po/zh_CN.po: Updated Simplified Chinese translation
-
-2004/02/10  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/probing.c: fake usb floppies detection by looking at blocks
-	size of scsi disk devices, 1048575 is for 2.4 and 1440 for 2.6
-
-	* mdk-stage1/mount.c: in network mode we need to create nodes as well
-	because of usb floppies support
-
-	* mdk-stage1/tools.c, mdk-stage1/tools.h: floppy_device returns first
-	floppy device, look for medias first in case of usb floppies (maybe ide
-	floppies also? never tested) then regular floppy drive
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c: use floppy_device rather than
-	/dev/fd0 because we now support usb floppies as well
-
-2004/02/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-	updated pot file
-
-2004/02/10  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm, detect_devices.pm, install_steps.pm: no need to fake scsi for
-	ide anymore (hopefully!)
-
-	* interactive/gtk.pm: have modal windows
-
-	* ugtk2.pm: better code for detecting if the window is hidden or not
-	(fixes embedded drakconnect wizard should be popped window) (bugzilla
-	#7246)
-
-	* services.pm: for install, a service is on if there is at least one
-	runlevel for which the
-	service is on (esp. for service "dm") (bugzilla #7146)
-
-	* c/stuff.xs.pl: we don't KTYP anymore, but we need K_NOSUCHMAP
-
-	* keyboard.pm: rewrite & cleanup. Now works with kernel 2.6, don't know
-	exactly why...
-
-	* common.pm: add unpack_with_refs()
-
-	* tools/serial_probe/serial.c: fix serial probe not detecting legacy mice
-
-	* share/keymaps.tar.bz2: update
-
-2004/02/10  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Use logdrake mail method, allow definition of
-	SMTP server. (Arnaud de Lorbeau)
-
-2004/02/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: do not allow to step forward if no network card
-	was found (workaround
-	#7672). we'd better be able to manually add an unsupported network
-	card though.
-
-	* drakxtools.spec: 10-0.10mdk
-
-	* security/msec.pm (apply_checks) reindent
-	(apply_checks) fix unable to save checks when config file is empty
-	(aka substInFile does not support using print in that case)
-
-	* share/po/fr.po: update
-
-2004/02/10  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/02/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-
-2004/02/10  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: better code for detecting if the window is hidden or not
-	(fixes embedded drakconnect wizard should be popped window) (bugzilla
-	#7246)
-	remove many warnings about unitialised value (causing a bug in
-	diagnostics.pm?)
-
-	* pkgs.pm: remove postfix from naughtyServers (fix titi)
-
-	* Xconfig/resolution_and_depth.pm: prefer BoardName to card_name
-
-	* interactive/gtk.pm: have modal windows
-
-2004/02/10  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Undo some of the breakage, format is still
-	wrong :(
-
-	* standalone/drakbackup: Remove confusing "On hard drive" checkbox from
-	wizard (Arnaud de Lorbeau)
-	Fix failure to disable user cron job. Code reduction.
-
-2004/02/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* pkgs.pm: warn when installing postfix server (#7102)
-	fix not warning about apache2 servers (#7559)
-
-	* network/ethernet.pm (mapIntfToDevice) match pci function too (not that
-	important since we
-	do not know of any ethernet pci card that export two functions on the
-	pci bug but anyway it's saner)
-	note that we do not match for pci domain since ldetect does not report
-	it
-
-2004/02/09  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/09  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/02/09  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_gtk.pm: resurrect 9.2 code for setting background. i was said to
-	remove it for move because default colour is already mandrake colour but
-	obviously it isn't.
-
-	* Xconfig/resolution_and_depth.pm: RIVA128 fails miserably when using
-	16bpp
-
-2004/02/09  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, standalone/XFdrake:
-	handle allowNVIDIA_rpms & allowATI_rpms directly in
-	Xconfig::card::install_server
-
-	* .cvsignore: my test file is now t.pl
-
-	* install_steps_gtk.pm: use modal windows during install
-
-	* common.pm: fix typo
-
-	* Xconfig/card.pm: fix typo
-	handle allowNVIDIA_rpms & allowATI_rpms directly in
-	Xconfig::card::install_server
-	force XF4 on all archs
-
-	* ugtk2.pm: remove show_all that breaks when there are some hidden windows
-	allow set_modal for popped windows at install
-
-2004/02/09  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Thierry compliance. Doesn't work anymore and
-	fails perl_checker now :P
-
-2004/02/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/ethernet.pm (ether_conf) rename it as write_ether_conf()
-	(mapIntfToDevice) fix pci/usb ethernet devices matching
-
-	* standalone/drakfont (appli_choice) fix crash on option toggling (#7248)
-
-	* network/netconnect.pm: fix unability to select gateway (#7585)
-	fix empty list in "multiple internet_connexions" step
-	fix unwritten ethernet interface config
-	sort ethX interfaces in list
-	blacklist bogus forcedeth driver for network hotplugging, enable
-	ifplugd support for all other drivers even at install time (#7389)
-
-	* drakxtools.spec: 10-0.9mdk
-	10-0.8mdk
-
-	* detect_devices.pm (getNet) detect athX interfaces too (maybe should we
-	inverse this func
-	logic and blacklist ppp and the like interfaces ...)
-	some eide Lite-on drivers are reported with different casse
-
-2004/02/08  Pixel  <pixel at mandrakesoft.com>
-
-	* Newt/.cvsignore: simplify
-
-	* install_steps_interactive.pm: adapt to change allowing checking
-	nvidia/ati proprietary driver availability only when needed
-
-	* xf86misc/main.pm, c/stuff.xs.pl, install_steps_gtk.pm, mouse.pm,
-	Makefile.config, xf86misc/main.xs, xf86misc/.cvsignore, drakxtools.spec,
-	xf86misc/Makefile.PL, common.pm, xf86misc/Makefile, Xconfig/test.pm,
-	Makefile.drakxtools: move Xtest() and setMouseLive() out of c/stuff to
-	xf86misc::main
-	so that we can use them (esp. setMouseLive) in standalone without making
-	drakxtools-newt
-	require xfree libs
-
-2004/02/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-	update
-
-	* drakxtools.spec: XFdrake can run w/o gtk+ toolkit
-	10-0.7mdk
-
-	* Xconfig/card.pm, standalone/XFdrake: make XFdrake startup be
-	instantenous for non nv|ati cards (allowNVIDIA_rpms and
-	allowATI_rpms tests used to cost us 99% of the long startup time of
-	XFdrake:-()
-
-2004/02/08  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org Arabic translation
-
-2004/02/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-	updated pot file
-
-	* standalone/logdrake: English typo and disambiguation of some strings
-
-2004/02/07  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: PXE image support, researched by Venantius
-	Kumar.
-
-2004/02/06  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/dwd-05.pl, share/advertising/dwd-08.pl,
-	share/advertising/dwd-02.pl, share/advertising/dwd-04.pl,
-	share/advertising/dwd-06.pl, share/advertising/dwd-07.pl,
-	share/advertising/dwd-09.pl: Update
-
-	* share/rpmsrate: Update for Discovery
-
-2004/02/06  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - do only one regexp on $interface
-	  - more readable repack
-	  - add sub check_field
-	  - check IPs
-	  - delete BOOTPROTO when not needed
-
-2004/02/06  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/06  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/url.c: log server http response
-
-	* ugtk2.pm: shrink_topwindow: add (force gtk to recompute size of
-	topwindow, when some child widgets got destroyed or shrinked)
-
-2004/02/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/help-zh_CN.pot, share/po/ms.po, share/po/sk.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/help_xml2pm.pl, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/he.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/nb.po, share/po/uz.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/lv.po, share/po/hu.po, share/po/fa.po, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/mn.po, share/po/uk.po,
-	share/po/lt.po, share/po/cy.po, share/po/help-it.pot, share/po/tg.po,
-	share/po/bs.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* help.pm: Changed Newt/Previous strings to remove arrows
-
-2004/02/06  Pixel  <pixel at mandrakesoft.com>
-
-	* drakxtools.spec: draksec needs gtk, no must not be in drakxtools-newt
-	(bugzilla #7413)
-
-	* Xconfig/monitor.pm: 
-	  - ensure ModelName comes from the ddc probe when choosing "Plug'n
-	Play"
-	  - only "Plug'n Play" instead of "Plug'n Play (<ModelName>)" when
-	current monitor is not plug'n play
-
-	* mouse.pm: 
-	  - add change_mouse_live()
-	  - use /dev/mouse in XF86Config to allow changing protocol in
-	standalone
-
-	* interactive/gtk.pm: workaround gtk limitation #133489
-
-	* install_steps_gtk.pm: use mouse::change_mouse_live()
-
-	* bootloader.pm: special way to remove mem=<memsize>
-	please perl_checker
-	following quintela's lilo change, allowing lilo labels up to 31
-	characters
-
-	* share/po/help_xml2pm.pl: 
-	  - handle zh_CN.po
-	  - handle tags <phrase> and <hardware>
-
-	* Xconfig/card.pm: don't test X config if using driver vmware (bugzilla
-	#5346)
-
-	* share/po/help-zh_CN.pot, share/po/help-ru.pot, help.pm,
-	share/po/help-de.pot, share/po/help-fr.pot, share/po/help-es.pot,
-	share/po/help-it.pot: update from xml
-
-	* standalone/mousedrake: use ->create_okcancel instead of doing it by hand
-	(hopefully it will ensure better choice of Ok/Cancel vs Cancel/Ok
-	without breaking anything...)
-	  - no special testing mouse in embedded
-	  - use mouse::change_mouse_live()
-
-	* network/shorewall.pm: handle range (bugzilla #7172)
-
-	* any.pm (fileshare_config): quite different way of handling it, asking
-	first if user
-	wants sharing or not, then asking which protocol (when users wants
-	sharing).
-	Removing or installing the server package handling the protocols (smb or
-	nfs).
-	handle better bootloader per entries video mode
-	special way to remove mem=<memsize>
-	remove defaulting global vga mode to normal
-	fix old typo: complete callback was not called
-	drop bootloader main options "Compact" and "Video mode"
-
-2004/02/06  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Provide more detailed info on files backed
-	up/ignored. <Anthill #306>
-	Cleanup some of the redundant code in the actual backup routines.
-
-2004/02/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/logdrake (alert_config) do not complain when removing non
-	existing cron entry
-	(aka when one run twice the disable path)
-
-	* security/msec.pm: fix draksec not saving options when config file do not
-	exists :-(
-
-	* share/po/fr.po: update
-	update
-	fix layout in drakconnect
-
-	* standalone/draksec: workaround gtk limitation #133489
-
-	* drakxtools.spec: 10-0.6mdk
-	move drakbug, drakclock, drakperm, drakTermServ, net_monitor in
-	drakxtools too since they require ugtk2.
-	move their aliases (soft links) their too.
-	10-0.5mdk
-	10-0.4mdk
-
-	* network/netconnect.pm: help perl_checker regarding comments for
-	translators
-	wireless step: add an hint for translators
-	split wireless step into two steps since there way too much options
-	fix wireless settings (references being made too early)
-	(main) try first to match a pcmcia device before trying to match
-	pci/usb when looking for module (#7431)
-
-	* ugtk2.pm (new) remove unused flush()
-	(new) fix pixel breaking non wizard embedded case while cleaning :-(
-
-	* standalone/draksound: advertize alsaconf too since sndconfig failled for
-	cards only managed
-	by ALSA (#7456)
-
-2004/02/06  Warly  <warly at mandrakesoft.com>
-
-	* standalone/drakboot: Warn if the user is not in framebuffer mode, but
-	allow to see the installed theme.
-	Do not perform autologin config in splash mode
-	Better parsing of current resolution from detect-resolution
-
-2004/02/05  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* any.pm: this part of code is already executed only in $::isInstall
-
-	* standalone/drakconnect: Informations doesn't exist in english, use
-	Information instead (no need to update the POs, they already contain
-	Information elsewhere)
-
-2004/02/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/mn.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/nb.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/mk.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/hi.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-
-	* share/po/zh_CN.po: updated pot file
-	updated Chinese file
-
-	* share/po/sl.po: updated Slovenian file
-	updated pot file
-
-	* share/po/et.po: updated pot file
-	updated Estonian file
-
-	* keyboard.pm: ichanged console uz keyboard to uz.uni
-
-	* share/po/cs.po: updated Czech file
-	updated pot file
-
-2004/02/05  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: allow 24bpp for DRI (since all drivers
-	now support it: we had mga tdfx r128
-	radeon, and i810 also works (tested on a i865))
-
-	* interactive/gtk.pm: since we use WrappedLabel, it's better not to
-	warp_text()
-
-	* standalone/drakboot: write fstab for /tmp using tmpfs when "clean /tmp"
-	is chosen
-
-	* Xconfig/xfreeX.pm, Xconfig/parse.pm, Xconfig/main.pm, Xconfig/xfree.pm: 
-	  - add ->prepare_write to allow comparing raw_X's
-	  - ensure "config_changed" is returned only if the config file really
-	changed
-
-	* ugtk2.pm: simplify _create_window() prototype
-
-	* diskdrake/dav.pm: remove "Quit" icon
-
-	* any.pm: fix ugly typo (occuring when removing "clean /tmp", ie not
-	often, especially
-	since drakboot didn't write fstab)
-
-	* install_steps.pm: install_steps is a do_pkgs, so add "use do_pkgs"
-
-2004/02/05  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2004/02/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/logdrake: typo fix (spoted by Per �yvind Karlsen)
-	upcase protocol name
-
-	* network/netconnect.pm: enable one to not enter optional parameters (aka
-	relax checks on valid
-	values for bitrate and frequency) (#7432)
-
-	* share/po/fr.po: update
-	another typo fix regarding firewall
-	typo fixes (cosmic flo)
-
-	* ugtk2.pm (new) add a border too when embedded
-
-	* network/ethernet.pm (get_eth_cards) try first to match a pcmcia device
-	before trying to
-	match pci/usb ones when looking for real device's name (#7401)
-
-2004/02/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/mn.po,
-	share/po/uk.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/bs.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/hi.po, share/po/af.po, share/po/az.po, share/po/pt.po,
-	share/po/fr.po, share/po/ta.po, share/po/vi.po, share/po/nl.po,
-	share/po/de.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po, share/po/uz@Latn.po: updated pot file
-
-	* lang.pm: more locale fixes; and changed images for Uzbek to default to
-	cyrillic
-	a bit of locales corrections
-
-	* pixmaps/langs/lang-uz@Latn.png, pixmaps/langs/lang-uz.png: more locale
-	fixes; and changed images for Uzbek to default to cyrillic
-
-2004/02/04  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/icons/wiz_default_left.png: remove $draw2 (in ugtk2.pm) and
-	wiz_default_left.png which are unused
-
-	* install_steps_gtk.pm: rename $ugtk2::force_center used at install with
-	$ugtk2::force_center_at_pos
-	the boolean $ugtk2::force_center value used standalone is kept as before
-
-	* mouse.pm: use protocol "ExplorerPS/2" instead of "auto" for kernel 2.6
-	(not statisfying since people booting with kernel 2.4 will not get a
-	working
-	mouse, but at least we can test if this really works nicely for 2.6)
-
-	* standalone/harddrake2, standalone.pm: $::noBorder is deprecated (it was
-	the same as !$::isInstall)
-
-	* ugtk2.pm: 
-	  - rename $ugtk2::force_center used at install with
-	$ugtk2::force_center_at_pos
-	the boolean $ugtk2::force_center value used standalone is kept as before
-	  - deprecate $::noBorder (it was the same as !$::isInstall)
-	  - deprecate $ugtk2::force_position (unused AFAIK)
-	
-	  - _create_window() now returns the created window, it doesn't assign
-	{rwindow}
-	  nor {window} anymore. It doesn't handle a Frame for the window
-	  (it is now directly done by ugtk2->new which is the only function
-	using _create_window())
-	
-	  - deprecate option no_interactive_objects (unused AFAIK)
-	
-	  - {rwindow} is a VBox for both isWizard and isEmbedded
-	  (when isEmbedded, a HBox was created, replacing the create VBox)
-	
-	  - call ->set_title on $::WizardWindow so that the title is honored in
-	non embedded wizard
-	
-	  - remove $draw2 and wiz_default_left.png which are unused
-	
-	  - remove ->set_uposition on $::WizardWindow for install. This is not
-	needed
-	  anymore since force_center_at_pos now works on $::WizardWindow
-	
-	  - hoist $::WizardTable creation
-	
-	  - explicitly set the size of the window during install. The chosen
-	value is
-	  the same as before +9 pixels for the height
-	  (the size needs to be fixed since the advertising images must fit)
-	
-	  - remove the callbacks on expose_event and delete_event for non
-	embedded wizard.
-	  they are the same as the one in _create_window()
-	  (except for the delete_event which explicitly destroy the window, is
-	that ok??)
-	
-	more questions:
-	  - ->set_title on a plug may break, it needs testing
-	  - flush() just after Gtk2::Plug->new, is it needed? (since there is
-	another flush())
-
-2004/02/04  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* drakxtools.spec: 
-	  - don't be afraid, this is not the doc package but just perl module
-	needed by drakhelp.
-
-	* timezone.pm: 
-	  - less arguments in ntp_server, $prefix no more passed to function
-	args
-
-	* share/rpmsrate: 
-	  - new mandrake-doc* names
-
-2004/02/04  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm: 
-	  - add network::ethernet::get_eth_cards_names
-	  - kill duplicated code
-	drop Storable and use Dumper (queen & pipi rulez)
-
-	* network/ethernet.pm: 
-	  - add network::ethernet::get_eth_cards_names
-	  - kill duplicated code
-
-	* standalone/drakconnect: compact declaration
-	ethernet cards get via get_eth_cards()
-	  - add network::ethernet::get_eth_cards_names
-	  - kill duplicated code
-	drop Storable and use Dumper (queen & pipi rulez)
-	typo fix...
-
-2004/02/04  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* standalone.pm: http://www.gnu.org/prep/standards_18.html says --help and
-	--version are printed on standard output
-
-	* docs/README: update netauto doc
-
-2004/02/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: a bit of locales corrections
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po, share/po/uz@Latn.po: updated pot file
-
-2004/02/04  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/icons/wiz_default_left.png: remove $draw2 (in ugtk2.pm) and
-	wiz_default_left.png which are unused
-
-	* lvm.pm: create /dev/mapper/control (needed when you don't have devfs)
-	  - replace PE_size with extent_size and get it (fix illegal division by
-	0)
-	  - fix getting the output of pvs vgs lvs commands
-	(chomp_ is not enough because of spaces at the end)
-	  - fix get_lvs() (and use lvs instead of vgdisplay)
-
-	* diskdrake/interactive.pm: 
-	  - don't display start sector and cylinders used for LVs
-	  - display "Number of logical extents" of LVs
-
-	* install_gtk.pm: we now use XF4 during install, so we can support
-	ExplorerPS/2 (XF3 didn't know it)
-
-	* install_steps_gtk.pm: rename $ugtk2::force_center used at install with
-	$ugtk2::force_center_at_pos
-	the boolean $ugtk2::force_center value used standalone is kept as before
-
-	* mouse.pm: use protocol "ExplorerPS/2" instead of "auto" for kernel 2.6
-	(not statisfying since people booting with kernel 2.4 will not get a
-	working
-	mouse, but at least we can test if this really works nicely for 2.6)
-
-	* Xconfig/card.pm: replace 4.3 with 4.4 (XFree version) (bugzilla #7378)
-
-	* ugtk2.pm: 
-	  - rename $ugtk2::force_center used at install with
-	$ugtk2::force_center_at_pos
-	the boolean $ugtk2::force_center value used standalone is kept as before
-	  - deprecate $::noBorder (it was the same as !$::isInstall)
-	  - deprecate $ugtk2::force_position (unused AFAIK)
-	
-	  - _create_window() now returns the created window, it doesn't assign
-	{rwindow}
-	  nor {window} anymore. It doesn't handle a Frame for the window
-	  (it is now directly done by ugtk2->new which is the only function
-	using _create_window())
-	
-	  - deprecate option no_interactive_objects (unused AFAIK)
-	
-	  - {rwindow} is a VBox for both isWizard and isEmbedded
-	  (when isEmbedded, a HBox was created, replacing the create VBox)
-	
-	  - call ->set_title on $::WizardWindow so that the title is honored in
-	non embedded wizard
-	
-	  - remove $draw2 and wiz_default_left.png which are unused
-	
-	  - remove ->set_uposition on $::WizardWindow for install. This is not
-	needed
-	  anymore since force_center_at_pos now works on $::WizardWindow
-	
-	  - hoist $::WizardTable creation
-	
-	  - explicitly set the size of the window during install. The chosen
-	value is
-	  the same as before +9 pixels for the height
-	  (the size needs to be fixed since the advertising images must fit)
-	
-	  - remove the callbacks on expose_event and delete_event for non
-	embedded wizard.
-	  they are the same as the one in _create_window()
-	  (except for the delete_event which explicitly destroy the window, is
-	that ok??)
-	
-	more questions:
-	  - ->set_title on a plug may break, it needs testing
-	  - flush() just after Gtk2::Plug->new, is it needed? (since there is
-	another flush())
-	(gtk_TextView_get_log): handle errors
-
-	* standalone/harddrake2, standalone.pm: $::noBorder is deprecated (it was
-	the same as !$::isInstall)
-
-	* interactive.pm: 
-	  ->ask_from_entry and ->ask_from_entries are better with focus_first
-
-	* do_pkgs.pm (ensure_is_installed): file to test if the package is
-	installed is optional.
-	But in that case, you have to check if it is installed first.
-
-2004/02/03  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm, standalone/drakconnect: 
-	  - fix adsl_conf_backend call
-	  - store and retreive network interfaces via $config file
-
-2004/02/03  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/03  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/modules.c: differentiate no floppy disk in driver or ext2 fs
-
-	* mdk-stage1/dhcp.c: document when netauto is not provided and bootfile
-	DHCP server param is given
-
-	* mdk-stage1/doc/TECH-INFOS: more doc on DHCP server response conf
-
-2004/02/03  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: perl_checker fix
-
-	* modules.pm: fix typo
-	fix typo
-
-2004/02/03  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Maintain /etc/passwd$$CLIENT$$ so mdkkdm has a
-	valid userlist.
-
-2004/02/03  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* modules/parameters.pm (parameters) fix modinfo parsing (format had been
-	altered between
-	modutils and module-init-tools :-()
-
-	* modules/interactive.pm (config_window) do not even try to hint the user
-	about the parameter
-	format on a 2.6.x kernel
-
-	* share/po/fr.po: fix translator that ignore shortcut hints
-
-2004/02/02  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/dis-07.pl, share/advertising/dis-09.pl: Update
-	Update
-
-	* share/advertising/pwp-05.pl, share/advertising/dis-06.pl,
-	share/advertising/dwd-08.pl, share/advertising/pwp-02.pl,
-	share/advertising/dwd-04.pl, share/advertising/ppp-03.pl,
-	share/advertising/dis-02.pl, share/advertising/dis-08.pl,
-	share/advertising/dis-04.pl, share/advertising/pwp-06.pl,
-	share/advertising/dis-11.pl, share/advertising/dwd-03.pl,
-	share/advertising/dis-10.pl, share/advertising/ppp-08.pl,
-	share/advertising/dwd-06.pl, share/advertising/ppp-02.pl,
-	share/advertising/pwp-07.pl, share/advertising/dwd-07.pl,
-	share/advertising/ppp-07.pl, share/advertising/dwd-02.pl,
-	share/advertising/dis-05.pl, share/advertising/ppp-09.pl,
-	share/advertising/dis-01.pl, share/advertising/pwp-10.pl,
-	share/advertising/dwd-05.pl, share/advertising/ppp-06.pl,
-	share/advertising/ppp-05.pl, share/advertising/ppp-01.pl,
-	share/advertising/dis-03.pl, share/advertising/pwp-03.pl,
-	share/advertising/ppp-04.pl, share/advertising/pwp-01.pl,
-	share/advertising/pwp-04.pl, share/advertising/pwp-08.pl,
-	share/advertising/pwp-09.pl, share/advertising/dwd-09.pl: Update
-
-2004/02/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po, share/po/uz@Latn.po: updated pot file;
-	changed Uzbek to default to cyrillic
-
-2004/02/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 10-0.3mdk
-	10-0.2mdk
-
-	* share/po/fr.po: make installer look smoother in french
-	fix drakboot layout when localized in french
-	update
-
-	* ugtk2.pm: use wrapped labels in various places
-
-	* interactive/gtk.pm: do not pass extra empty invisible label (really
-	cosmetic)
-	use wrapped labels in various places
-
-	* c/stuff.xs.pl: kill warning
-
-	* network/netconnect.pm: only list wireless capabale cards when one choose
-	wireless cnx
-	split out wireless connections out of lan ones so that users are less
-	confused
-	fix preselecting ppoa for speedtouch modem
-
-	* standalone/logdrake: remove unneeded next fields
-	make cron script be able to use either local smtp server or a remote
-	one (arnaud)
-	add "remove cron entry" on arnaud request
-
-	* standalone.pm: update drakfont help message
-	bump copyright
-	  --help: documente new drakboot and drakconnect parameters
-
-	* any.pm: fix drakboot layout: use checkboxes own labels rather than
-	packing extra
-	labels
-
-	* network/tools.pm (is_wireless_intf) kill it since it's no more usefull.
-	rationale: rather than duplicating modules list in
-	kernel/list_modules.pm
-	and network/tools.pm (with usual sync bugs), it's quite much easier to
-	maintain one single list of wireless modules in list_modules.pm
-
-2004/02/02  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/advertising/dis-10.pl, share/advertising/pwp-09.pl: unified
-	phrases that are the same, to ease translating
-
-2004/02/02  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: fix reading stage1 network configuration
-
-	* detect_devices.pm: 
-	  - no ide-scsi emulation for ide ZIPs
-	  - no ide-scsi emulation for cd burners when kernel 2.6
-
-	* install_steps.pm: fix typo creating agpgart alias
-	  - no ide-scsi emulation for ide ZIPs
-	  - no ide-scsi emulation for cd burners when kernel 2.6
-
-2004/02/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: remove debug message
-	fix adsl modem detection
-
-	* network/tools.pm: remove pseudo global variables use from use_floppy()
-
-	* network/adsl.pm (adsl_detect) fix modem detection so that harddrake get
-	full device
-	meta data rather than plain presence boolean
-	remove pseudo global variables use from adsl_conf_backend()
-
-	* network/netconnect.pm: fix preselecting ppoa for speedtouch modem
-	remove pseudo global variables use from use_floppy()
-	remove pseudo global variables use from adsl_conf_backend()
-
-	* drakxtools.spec: 10-0.2mdk
-	10-0.1mdk
-
-	* share/rpmsrate: add some packages for adsl
-
-	* network/ethernet.pm: this module does not need anymore pseudo global
-	variables
-
-	* harddrake/sound.pm: handle new aureal drivers
-
-2004/02/02  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/02/02  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: 
-	  - no ide-scsi emulation for ide ZIPs
-	  - no ide-scsi emulation for cd burners when kernel 2.6
-
-	* install_steps.pm: fix typo creating agpgart alias
-	  - no ide-scsi emulation for ide ZIPs
-	  - no ide-scsi emulation for cd burners when kernel 2.6
-
-2004/02/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/ethernet.pm (get_eth_cards) handle not loaded drivers
-
-	* harddrake/sound.pm: handle new aureal drivers
-
-	* drakxtools.spec: 9.3-28mdk
-
-2004/02/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: only install uim and anthil on cjk boxes
-
-	* network/ethernet.pm (get_eth_cards) handle not loaded drivers
-
-	* drakxtools.spec: 9.3-28mdk
-
-2004/02/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: changed font names to match real font name capitalization
-
-	* share/po/de.po: updated German file
-
-2004/02/01  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org's Arabic translation.
-
-2004/01/31  keld
-
-	* share/po/da.po: updates
-	soft/ftw/po/da.po soft/initscripts/po/da.po
-	soft/menudrake/po/da.po soft/urpmi/po/da.po
-	soft/wizard_perl/po/da.po gi/perl-install/share/po/da.po
-
-2004/01/31  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl_consts.pm: add sources url
-
-	* network/netconnect.pm: enable to set hostname even when using DHCP
-	(#7230)
-
-2004/01/30  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/ppp-07.pl, share/advertising/dis-06.pl,
-	share/advertising/dwd-08.pl, share/advertising/dwd-02.pl,
-	share/advertising/dwd-04.pl, share/advertising/ppp-09.pl,
-	share/advertising/ppp-03.pl, share/advertising/dwd-01.pl,
-	share/advertising/dwd-05.pl, share/advertising/ppp-06.pl,
-	share/advertising/dwd-03.pl, share/advertising/dis-10.pl,
-	share/advertising/ppp-05.pl, share/advertising/ppp-11.pl,
-	share/advertising/ppp-01.pl, share/advertising/ppp-08.pl,
-	share/advertising/ppp-10.pl, share/advertising/dwd-06.pl,
-	share/advertising/ppp-04.pl, share/advertising/ppp-02.pl,
-	share/advertising/dwd-07.pl: Update
-
-	* share/advertising/dwd-09.pl: Fix typo
-	Update
-
-2004/01/30  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - remove not needed $security
-	  - clean dumb foreach repetition (one foreach to rule them all)
-
-2004/01/30  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: hack :( if ' ' is at the beginning of a text section, don't
-	forget it, substitute
-	with an unbreakable space because gtk allocates too much space otherwise
-
-	* install_messages.pm: bump up to 100errata
-
-2004/01/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-2004/01/30  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: add help method ->iter_each_children for Gtk2::TreeModel
-
-2004/01/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: do not offer to select dhcp client when
-	configuring static interfaces
-	fix crash on module lookup when ifcfg-<intf> file is missing on disk
-	(not yet configured interface case)
-
-	* share/po/fr.po: update
-
-	* share/advertising/dwd-07.pl: share string with dis-10.pl ppp-10.pl and
-	pwp-09.pl
-
-	* drakxtools.spec: log one more change in -27mdk
-	9.3-27mdk
-
-	* share/rpmsrate: add anthy/uim better cjk input methods
-
-2004/01/30  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: add magicdev in SYSTEM for KDE or GNOME
-
-2004/01/30  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - remove not needed $security
-	  - clean dumb foreach repetition (one foreach to rule them all)
-
-2004/01/30  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: hack :( if ' ' is at the beginning of a text section, don't
-	forget it, substitute
-	with an unbreakable space because gtk allocates too much space otherwise
-
-	* install_messages.pm: bump up to 100errata
-
-2004/01/30  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* install_steps.pm: add/fix various/agpgart section
-
-2004/01/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-2004/01/30  Pixel  <pixel at mandrakesoft.com>
-
-	* modules.pm, install_steps.pm: xxx-agp is not loaded at install, so
-	when_load() is not the right place
-
-	* ugtk2.pm: add help method ->iter_each_children for Gtk2::TreeModel
-
-2004/01/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: do not offer to select dhcp client when
-	configuring static interfaces
-	fix crash on module lookup when ifcfg-<intf> file is missing on disk
-	(not yet configured interface case)
-
-	* drakxtools.spec: log one more change in -27mdk
-	9.3-27mdk
-
-2004/01/30  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - show gateway in ethernet only
-	  - hide gateway Entry in dhcp mode
-
-2004/01/30  Nicolas Planel  <nplanel at mandrakesoft.com>
-
-	* install_steps.pm: add/fix various/agpgart section
-
-2004/01/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/fi.po: updated Estonian and Finnish files
-
-2004/01/30  Pixel  <pixel at mandrakesoft.com>
-
-	* modules.pm, install_steps.pm: xxx-agp is not loaded at install, so
-	when_load() is not the right place
-
-	* c/stuff.xs.pl: the multiplication must be done with type "long long"
-	otherwise it overflows at 4GB
-
-	* partition_table.pm: 
-	  - tell kernel to remove the extended partition
-	  - true/false is better than yes/no in log message
-	enhance log message "tell kernel ..."
-
-2004/01/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/rpmsrate: force availlability of speedtouch and eagle packages at
-	install time
-
-	* network/ethernet.pm (conf_network_card_backend) make type and interface
-	arguments mandatory
-
-	* network/netconnect.pm: perl_checker cleanups
-
-2004/01/30  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: add rpm-rebuilder and lm_sensors
-	add dvd+rw-tools in BURNER
-
-2004/01/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po: updated pot file
-
-2004/01/29  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: replace iocharset= with nls= for ntfs (as instructed by Thomas
-	Backlund, thanks)
-
-2004/01/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/tools.pm (set_cnx_script) split it out of write_cnx_script()
-	rationale:functions whose behavior is totally altered by arguments
-	number are insane should just be splited and their callers be fixed
-
-	* network/adsl.pm, network/isdn.pm: convert some write_cnx_script()
-	callers into set_cnx_script() ones
-
-	* network/network.pm, standalone/drakconnect: replace
-	conf_network_card_backend() "detect" calls by get_eth_cards() ones
-
-	* network/netconnect.pm: kppp provider db reading: blacklist spurious
-	.directory entries
-	kill dead code
-	prevent the installer from going back to proxy configuration (!!!)
-	when pressinth the previous button on first step of network config
-	wizard :-)
-	cleanups enabled b/c of path sharing between standalone tool and
-	installer
-	convert some write_cnx_script() callers into set_cnx_script() ones
-	replace conf_network_card_backend() "detect" calls by get_eth_cards()
-	ones
-
-	* drakxtools.spec: fix changelog
-
-	* share/po/fr.po: update
-
-	* network/ethernet.pm: convert some write_cnx_script() callers into
-	set_cnx_script() ones
-	(conf_network_card_backend) insert a bug notice
-	(conf_network_card_backend) remove compat stuff since callers were
-	cleaned up
-
-2004/01/29  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: beautify ethernet cards name
-	shrink
-
-2004/01/29  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/advertising/dwd-03.pl, install_steps_gtk.pm,
-	share/advertising/dwd-01.pl, share/advertising/dwd-02.pl, ugtk2.pm:
-	advertising:
-	  - support leftish and centered text
-	  - support arbitrary bold text with ml-like syntax <b>foo</b> in
-	strings
-	  - simplify get_text_coord and unexport it, no one else than
-	wrap_paragraph uses it nowadays
-
-2004/01/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/help-ru.pot, share/po/help-fr.pot: converted help-*.pot files
-	to utf-8 too (they MUST be of same encoding
-	as po files)
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po: updated pot file
-
-2004/01/29  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: replace iocharset= with nls= for ntfs (as instructed by Thomas
-	Backlund, thanks)
-
-2004/01/29  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Configure clients with defined IPs to set
-	hostname so gnome works.
-
-2004/01/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: prevent the installer from going back to proxy
-	configuration (!!!)
-	when pressinth the previous button on first step of network config
-	wizard :-)
-	cleanups enabled b/c of path sharing between standalone tool and
-	installer
-	convert some write_cnx_script() callers into set_cnx_script() ones
-	replace conf_network_card_backend() "detect" calls by get_eth_cards()
-	ones
-	help cperl-mode parsing this file (drawback: perl_checker won't be
-	happy)
-	simplify
-
-	* network/tools.pm (set_cnx_script) split it out of write_cnx_script()
-	rationale:functions whose behavior is totally altered by arguments
-	number are insane should just be splited and their callers be fixed
-
-	* network/adsl.pm, network/isdn.pm: convert some write_cnx_script()
-	callers into set_cnx_script() ones
-
-	* network/network.pm, standalone/drakconnect: replace
-	conf_network_card_backend() "detect" calls by get_eth_cards() ones
-
-	* share/po/fr.po: update
-
-	* network/ethernet.pm: convert some write_cnx_script() callers into
-	set_cnx_script() ones
-	(conf_network_card_backend) insert a bug notice
-	(conf_network_card_backend) remove compat stuff since callers were
-	cleaned up
-
-	* drakxtools.spec: 9.3-26mdk
-	9.3-24mdk was never released
-	9.3-25mdk
-
-2004/01/29  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: shrink
-	fix modem login fetching
-	  - use nice interfaces name (e.g. ethernet0 rather than eth0)
-	  - fix adsl loading and saving calls
-
-2004/01/29  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/advertising/dwd-03.pl, install_steps_gtk.pm,
-	share/advertising/dwd-01.pl, share/advertising/dwd-02.pl, ugtk2.pm:
-	advertising:
-	  - support leftish and centered text
-	  - support arbitrary bold text with ml-like syntax <b>foo</b> in
-	strings
-	  - simplify get_text_coord and unexport it, no one else than
-	wrap_paragraph uses it nowadays
-
-2004/01/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/net_monitor: do not force page switch
-
-	* drakxtools.spec: 9.3-25mdk
-	9.3-24mdk
-
-	* security/msec.pm: fix parsing of default values for multi argument msec
-	functions
-
-	* network/netconnect.pm: help cperl-mode parsing this file (drawback:
-	perl_checker won't be
-	happy)
-	simplify
-	fix interface config file writing
-	fix DHCP client installation
-	fix static/dhcp step branching
-	fix ethernet network card list
-
-	* security/help.pm: add help for newly introduced MAIL_EMPTY_CONTENT item
-	notify that timeout is in seconds
-
-2004/01/29  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/01/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm: fix encapsulation parameter
-	fix VPI parameter setting
-	(adsl_conf_backend) fix disconnect script
-	(adsl_conf_backend) fix ppp's pty server
-
-	* network/netconnect.pm: typo fix
-	fix encapsulation pull down menu filling
-	enable to alter encapsulation, vci and vpi parameters in advanced mode
-	write cnx scripts for cable connection too
-
-	* drakxtools.spec: 9.3-23mdk
-
-2004/01/28  David Baudens  <baudens at mandrakesoft.com>
-
-	* pixmaps/about.png, pixmaps/nosplash_thumb.png,
-	pixmaps/slpash-drakeprint-2.png, pixmaps/printerdrake.png: Update
-
-2004/01/28  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: sucky toggled fix (queen fix)
-	  - move radio buttons to $gui->{intf_radio}
-	  - fix authentication menu wrongly used for isdn
-
-2004/01/28  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/dns.c, mdk-stage1/network.c: allow having no DNS by only
-	using the ip callback once, see DNS == IP as a special case, don't do
-	DNS calls when no DNS is configured to avoid timeouts
-
-2004/01/28  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm: create add_modify_remove_sensitive() and use it so
-	that "Modify" and "Remove"
-	are non sensitive when the initial list is empty
-
-2004/01/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm (adsl_probe_info) minor cleanups
-	(adsl_conf_backend) new configuration stuff
-
-	* network/modem.pm: simplify code through format callback (thus enabling
-	to centralize translatable
-	strings, thus reducing error risk)
-
-	* network/netconnect.pm: removed useless variable
-	simplify code through format callback (thus enabling to centralize
-	translatable
-	strings, thus reducing error risk)
-
-2004/01/27  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/th.po,
-	share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/po/hu.po: fix typo s#Network name#Network name#
-
-	* standalone/drakconnect: fix typo s/Netwok name (ESSID)/Network name
-	(ESSID)/
-	  - fix Information page
-	  - use mapIntfToDevice to get infos
-
-2004/01/27  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: 
-	  - add gtk_new_TextView_get_log() and gtk_TextView_get_log() which
-	allow
-	running a command in background and get the filtered output in a
-	TextView
-	  - add Gtk2::OptionMenu::new_with_strings() which is a simple
-	combination of
-	  ->new, ->set_popdown_strings and ->set_text
-
-2004/01/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: rollback debug stuff :-(
-	typo fix
-	get encapsulation default value from provider db and offer to configure
-	it
-	typo fix
-	adiusbadsl package was renamed as eagle
-	default protocol for speedtouch is pppoa
-	do not try to install "auto" package
-	install needed packages w/o second thoughs
-	remove extra argument
-	add a step in order to select a provider from kppp database
-	configure adsl account
-	(isdn account step)
-	  - directly use needed variables
-	  - kill uneeded fields
-	preset domainname for a few known providers
-
-	* share/po/fr.po: update
-
-	* network/adsl.pm: kill dead code
-	(adsl_probe_info) vpi and vci parameters are independant
-
-	* network/adsl_consts.pm: typo fix
-	  - add Retevision spanish provider
-	  - add encapsulation default value
-	preset domainname for a few known providers
-	typo fix
-
-2004/01/26  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - fix sucky fix
-	  - fix missing parameters
-	  - add kind and protocol to $config
-	  - fix various issues from $config changes
-
-2004/01/26  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/modules.c: don't forget to umount additional drivers floppy
-	after successful copy of modules.mar (gc sux)
-
-2004/01/26  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: fix typo
-
-	* ugtk2.pm: add gtk_set_treelist
-
-	* share/list: perl Gtk2 has been rebuilt
-
-	* interactive/gtk.pm: 
-	  - pack add_modify_remove widget growable
-	  - no need to size it
-	new function add_modify_remove_action()
-
-2004/01/26  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Another cron issue reported on Anthill.
-
-	* standalone/drakTermServ: Remove unused sub.
-
-2004/01/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: reput back my changes that poulpy gratuitously
-	rollbacked because:
-	  - he hadn't update network/*pm but only update standalone/drakconnect
-	  - he happilly followed what perl_checker instrumentate him w/o any
-	second thoughs
-	next time damien, do not listen gc when he's explaining how he
-	resolves conflicts the first time he used cvs :-(
-	get rid of global variables regarding connect/disconnect scripts
-
-	* network/ethernet.pm (mapIntfToDevice) actually use given interface
-	rather than hardcoded "eth0"
-	cleanups
-	(get_eth_cards)
-	  - split it out of conf_network_card_backend() (which still call it for
-	compatibility for now but sincefunctions whose behavior is totally
-	altered by
-	  arguments are insane should just be splited, caller will be fixed then
-	this
-	  compatibily call removed)
-	  - add a third string in returned tuples (physical net device
-	description)
-	(mapIntfToDevice) introduce it in order to map a network interface to a
-	pci/usb/... device
-	get rid of pseudo global $prefix, just reuse global $::prefix :-)
-
-	* standalone/net_monitor: get rid of global variables regarding
-	connect/disconnect scripts
-
-	* network/network.pm: get rid of pseudo global $prefix, just reuse global
-	$::prefix :-)
-	kill unused down_it() and up_it() functions
-
-	* network/tools.pm: get rid of global variables regarding
-	connect/disconnect scripts
-	get rid of pseudo global $prefix, just reuse global $::prefix :-)
-
-	* network/adsl.pm, network/isdn.pm: get rid of pseudo global $prefix, just
-	reuse global $::prefix :-)
-
-	* network/adsl_consts.pm: rename dns fields as they're named in netc
-	structure
-
-	* network/netconnect.pm: reuse values got from provider db
-	display nice "ethX: card description" rather than raw interface name
-	when
-	selecting an ethernet interface
-	perl_checker was wrong
-	get rid of global variables regarding connect/disconnect scripts
-	(stop_internet) init_globals()'s prefix parameter is dead
-	get rid of pseudo global $prefix, just reuse global $::prefix :-)
-	fix the cleanup
-	remove useless parenthessis
-	make wizard be faster when trying to install speedtouch_mgmt and when
-	firmware
-	is already present
-	share provider db for all usb modems (vpi/vci parameters are need for
-	most
-	modem/protocol combinaisons and anyway it's ok to guess the protocol and
-	dns
-	servers for the end user)
-	  - let be faster when trying to install already installed packages
-	  - fix next step name when installing kppp
-
-2004/01/26  keld
-
-	* share/po/da.po: Updates
-	soft/control-center/po/da.po soft/GtkMdkWidgets/po/da.po
-	soft/mdkhtmlbrowser/po/da.po soft/menudrake/po/da.po
-	soft/rfbdrake/po/da.po gi/perl-install/share/po/da.po
-
-2004/01/26  Pixel  <pixel at mandrakesoft.com>
-
-	* keyboard.pm: don't use ioctl KDSKBENT with kernel 2.6, until fixed...
-
-2004/01/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakclock (Repaint) help perl_checker in checking
-	time_to_rad() arguments
-	(spinned) do not pass extra arguments to time_to_rad()
-	reindent gtkpack calls
-	rename adj_* variables as adj* in order to help cperl-mode parsing
-	this file
-
-	* c/stuff.xs.pl (getNetDriver) introduce getHwIDs() alias that return
-	pci/usb/... hw
-	addr (or "N/A" for some isapnp cards due to lack of support from
-	drivers)
-
-2004/01/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: kill unused dhcp_hostname step
-	fix again adsl type setting :-(
-	modem connection: install kppp
-	set adsl protocol to use according to provider database when using a
-	sagem 800
-	modem
-	modem connection: default to pap/chap authentification method (should
-	work for
-	most people)
-	typo fix
-
-	* drakxtools.spec: typo fix
-
-	* share/po/fr.po: update
-
-	* share/po/br.po: minor update
-
-2004/01/25  yrahal
-
-	* share/po/ar.po: Committing Arabeyes.org translation.
-
-2004/01/24  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2004/01/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: s/ppptp/pptp/
-	factorize lan module search for adsl through ethernet
-	make adsl device choose somewhat readable (detabable though
-	fix adsl device setting :-(
-	kill unreachable code
-	kill unused variable
-	cleanup
-
-2004/01/23  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/dis-01.png, share/advertising/dwd-06.png,
-	share/advertising/dis-05.png, share/advertising/dis-08.png,
-	share/advertising/pwp-01.png, share/advertising/ppp-08.png,
-	share/advertising/dis-10.png, share/advertising/dwd-07.png,
-	share/advertising/dwd-02.png, share/advertising/ppp-06.png,
-	share/advertising/dis-07.png, share/advertising/pwp-05.png,
-	share/advertising/ppp-03.png, share/advertising/ppp-01.png,
-	share/advertising/dwd-04.png, share/advertising/dis-02.png,
-	share/advertising/pwp-03.png, share/advertising/ppp-05.png,
-	share/advertising/pwp-08.png, share/advertising/dwd-03.png,
-	share/advertising/dis-09.png, share/advertising/dis-03.png,
-	share/advertising/ppp-04.png, share/advertising/ppp-11.png,
-	share/advertising/dwd-08.png, share/advertising/pwp-06.png,
-	share/advertising/dis-06.png, share/advertising/ppp-09.png,
-	share/advertising/dis-11.png, share/advertising/ppp-10.png,
-	share/advertising/pwp-02.png, share/advertising/dis-04.png,
-	share/advertising/pwp-10.png, share/advertising/ppp-07.png,
-	share/advertising/pwp-09.png, share/advertising/dwd-01.png,
-	share/advertising/dwd-09.png, share/advertising/dwd-05.png,
-	share/advertising/ppp-02.png, share/advertising/pwp-07.png,
-	share/advertising/pwp-04.png: Update
-
-2004/01/23  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* rescue/tree/bin/insmod: autoprobe? what's that?
-
-	* docs/HACKING: wrong, "make" in kernel by hand is not even needed
-	update
-
-	* rescue/tree/sbin/modprobe: support 2.4 and 2.6
-
-	* standalone/printerdrake: "use USER" is unecessary and probably comes
-	from copy-pasting userdrake's GUI
-
-	* modules.pm: don't miss the hook with 2.6 usb kernels (might explain
-	fredl problem with usb keyboard)
-
-	* mdk-stage1/nfsmount.c: since dietlibc always reports null strings for
-	RPC errors, at least provide something useful instead
-
-	* rescue/list: lsmod.old and rmmod.old also needed
-
-2004/01/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po: upfdated pot file
-
-	* share/po/et.po: updated Estonian po file
-	upfdated pot file
-
-2004/01/23  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: checking {notFormatted} must never be done alone, one must check
-	{isFormatted} first!
-
-2004/01/23  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: perl_checker: assigned, but not read
-	More perl_checker fixes. Remove another unused sub.
-	Fix broken sys, other restore.
-	Rework timestamp for backup files to please perl_checker.
-
-2004/01/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakfont (search_dir_font) kill unused variable
-
-	* network/adsl_consts.pm: provider database needed in oder to not
-	arbitrary set obfuscated vpi
-	and vci parameters
-
-	* network/adsl.pm (adsl_probe_info) make it aware of the fact we now see
-	the adsl modem
-	and protocol separatly
-
-	* share/po/fr.po: update
-	minor update
-	update
-
-	* network/netconnect.pm: fix adsl connection type retrieving
-	fix interface name when doing adsl over an ethernet card
-	sort ADSL connection types
-	offer to configure sagem800 (needed because of unfriendly vpi/vci
-	parameters)
-
-	* interactive/gtk.pm: remove debug message
-	(ask_fromW) enable TreeView to take all availlable space
-
-2004/01/22  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - remove _radio suffix
-	  - prevent undefined value to be get_texted
-	  - further s/cnx/intf/
-	  - remove old code
-
-2004/01/22  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/probing.c: moving forward our story with nice kernel guys,
-	now they decided to remove the trailing space at the end of "Attached
-	devices:" of /proc/scsi/scsi, probably that they had nothing more
-	interesting to do this day
-	until we haven't loaded the usb interface and the keyboard usb driver,
-	we can't allow asking for additional drivers floppy, so need another
-	parameter to my_insmod to indicate in which situation we are
-
-	* mdk-stage1/cdrom.c, mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/mount.c,
-	mdk-stage1/lomount.c, mdk-stage1/disk.c, mdk-stage1/modules.h,
-	mdk-stage1/stage1.c, mdk-stage1/adsl.c, mdk-stage1/network.c: until we
-	haven't loaded the usb interface and the keyboard usb driver, we can't
-	allow asking for additional drivers floppy, so need another parameter to
-	my_insmod to indicate in which situation we are
-
-	* tools/cvslog2changelog.pl: clean up users
-	add planou
-
-	* mdk-stage1/modules.c: better do 2.4->2.6 compat module alias as soon as
-	possible to display correct stuff in logs and simplify code
-	until we haven't loaded the usb interface and the keyboard usb driver,
-	we can't allow asking for additional drivers floppy, so need another
-	parameter to my_insmod to indicate in which situation we are
-	when checking for modules already loaded, be sure to check for the real
-	name
-	ensure insmod will try to access correct filename according to 2.4->2.6
-	compat mapping
-	really display filename when "error reading" a file to insmod in 2.6
-
-	* mdk-stage1/Makefile: stage1-network-usb is deprecated
-
-2004/01/22  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/stdio.pm: $def_n is unused
-
-	* interactive/gtk.pm: remove unused variable
-
-	* modules/interactive.pm, install_steps_interactive.pm: help perl_checker
-
-2004/01/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: update copyright notices
-	  - fix untraslated strings
-	  - upcase tcp/ip
-
-	* network/tools.pm (copy_firmware) kill it (was merged into add intf
-	wizard
-
-	* network/netconnect.pm: fix doble "IP address" entries
-	typo fix
-	config some stuff about adsl protocol
-	kill debug statement
-	factorize out adsl protocols' translations
-	get rid of uselesss net_device variabl
-	code simplification due to previous assertion
-	ensure struct XXX and o_XXX parameters always reference the same hashes
-	when configuring an ethernet card, skip the protocol choice step for any
-	cnx
-	type different than lan (eg: for cable and adsl connections)
-	rollback debug stuff :-(
-	handle speedtouch firmware if needed
-	detect ECI like modems and warn we cannot support them (hence less
-	pressure on
-	our support services)
-	fix typo fix
-	typo fix :-(
-	tag speedtouch and eci connections as to be restarted as in old wizard
-
-	* detect_devices.pm: perl_checker cleanups
-	do not mix before and after firmware upload usb ids
-	(getECI) introduce it in order to detect eci like usb modems
-
-	* standalone/drakfont: update copyright notices
-	remove never implemented --strong option
-	perl_checker cleanups
-	fix button label
-
-	* network/adsl.pm (adsl_conf_backend) kill interactive code (was merged
-	into adsl wizard)
-	(adsl_detect) detect ECI modems
-	rename old end adsl step
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/br.po, share/po/sl.po,
-	share/po/uz@Cyrl.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/advertising/dwd-03.pl, share/po/mn.po, share/po/uk.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/bs.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/hi.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/fr.po, share/po/ta.po, share/po/nl.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/cs.po:
-	s/(Mandrake Linux is one) (the most widely used)/\1 of \2/
-
-	* ugtk2.pm: perl_checker cleanups
-	minor cleanups
-	(gtkadd_widget) introduce it for size groups
-
-	* standalone/drakfirewall, standalone/logdrake, standalone/drakpxe,
-	standalone/drakboot, standalone/drakTermServ, standalone/net_monitor,
-	standalone/drakbackup, standalone/printerdrake, standalone/fileshareset,
-	standalone/drakedm, standalone/drakhelp, standalone/XFdrake,
-	standalone/drakbug, standalone/drakupdate_fstab, standalone/draksound,
-	standalone/drakxtv, standalone/draksec, standalone/drakautoinst,
-	standalone/drakproxy, standalone/diskdrake, standalone/drakfloppy,
-	standalone/drakgw, standalone/scannerdrake: update copyright notices
-
-	* interactive/gtk.pm (ask_fromW) gc prefers ->isa()
-	(ask_fromW) enable properly setted checkbuttons (aka those who
-	correctly use text instead of label) to take all the place they need,
-	thus preventing spurious horizontal scrolling bar to show up
-
-	* harddrake/sound.pm: draksound doesn't write the sound alias b/c of wrong
-	comparison with the
-	default driver, thus not configuring not yet configured cards (#6988)
-
-2004/01/22  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2004/01/22  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: do not test $intf but $gui, poulpy sux
-	fix isdn modem page
-	factorise gui set_text
-	  - drop detection, will use interface scheme ($config)
-	  - use $interface_kind
-	drop now unused code
-	fix broken MII_NOT_SUPPORTED and HWADDR
-	add dns3 entry
-
-2004/01/22  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* modules.pm: nice kernel guys spend their free time renaming modules for
-	fun
-
-	* mdk-stage1/doc/TECH-INFOS: disk will also need the directory
-
-	* mdk-stage1/modules.c: nice kernel guys like to change modules names for
-	no reasons when they have a break
-
-2004/01/22  Pixel  <pixel at mandrakesoft.com>
-
-	* tools/Makefile: rpmtools and perl-URPM are still 5.8.2
-
-2004/01/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: typo fix :-(
-	tag speedtouch and eci connections as to be restarted as in old wizard
-	install needed package depending of modem
-	rollback
-	add static configuration for sagem800 spanish users
-	hide too big label (which is useless because of above text) but keep
-	it for translation b/c of further reusage
-
-	* network/adsl.pm: rename old end adsl step
-
-2004/01/21  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: retreive vpi and vci from config file for speedtouch
-
-2004/01/21  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/modules.c: add capability to use an additional drivers floppy
-	network_gigabit_usb doesn't exist anymore
-
-	* network/netconnect.pm: perl checker fixes
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h: add capability to use an
-	additional drivers floppy
-
-	* modules.pm: misc change: more readable way of setting usb-interface
-	alias
-
-2004/01/21  nplanel
-
-	* modules.pm: add *-agp module support
-
-2004/01/21  Till Kamppeter  <till at mandrakesoft.com>
-
-	* scanner.pm, standalone/printerdrake: Removed occurences of "Mandrake"
-	from translateable strings.
-
-	* printer/main.pm, printer/printerdrake.pm: Added title bar texts for
-	error and warning pop-ups.
-	Removed occurences of "Mandrake" from translateable strings.
-
-	* standalone/scannerdrake: Updated title bar texts of error pop-ups.
-	Removed occurences of "Mandrake" from translateable strings.
-
-2004/01/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/adsl.pm: rename old adsl step
-	(adsl_detect)
-	  - remove useless parameter
-	  - always return an hash, even if empty (simplify caller code)
-
-	* network/netconnect.pm: really use the same path in standalone and
-	install mode
-	add new first adsl steps
-	factorize lan detection (needed for adsl)
-
-2004/01/21  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/po/fr.po: fix typo
-
-2004/01/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po: updated pot file
-
-2004/01/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-2004/01/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pl.po, share/po/hi.po: updated pot file
-	updated Hindi file; corrected syntax error in Polish file
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/nl.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/hu.po: updated
-	pot file
-
-	* network/netconnect.pm: fixed typo
-
-2004/01/21  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm, ugtk2.pm: 
-	  - fix sizing main window
-	  - always use a scrolled window when non pop_it
-	(so that the buttons are at the bottom)
-
-	* any.pm: perl_checker fix
-
-	* modules.pm: don't pass empty options, new insmod doesn't like it
-
-	* share/po/Makefile, Makefile: remove checking "$" in po strings,
-	perl_checker takes care of this correctly
-	(ie. N("a\$b") will get string "a$b" in po which is ok, whereas N("a$b")
-	gives an error)
-
-2004/01/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: simplify
-
-2004/01/20  Pixel  <pixel at mandrakesoft.com>
-
-	* modules.pm: 
-	  - ugly hack to temporary handle reading ide_cd in /proc/modules
-	whereas we
-	insmoded ide-cd
-	  - removing load_ide() (unused)
-
-	* rescue/list, share/list: replace PERL_VERSION with current version of
-	some perl modules
-
-	* install_steps.pm: modules::load_ide() is removed, now we use the same as
-	install_step_interactive
-
-2004/01/20  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated partially
-
-2004/01/20  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakgw: install the squid package, if necessary
-
-2004/01/20  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/01/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po: updated pot file
-
-2004/01/20  Pixel  <pixel at mandrakesoft.com>
-
-	* modules.pm: 
-	  - ugly hack to temporary handle reading ide_cd in /proc/modules
-	whereas we
-	insmoded ide-cd
-	  - removing load_ide() (unused)
-
-	* any.pm: in setupBootloader__entries():
-	  - move vga and initrd from $::expert to advanced
-	  - drop setting read-write, table, unsafe
-
-	* rescue/list, share/list: replace PERL_VERSION with current version of
-	some perl modules
-
-	* install_steps.pm: modules::load_ide() is removed, now we use the same as
-	install_step_interactive
-
-	* interactive/gtk.pm: do not try anymore to have small pop_it dialog
-	boxes. Make them all the same
-	size and so drop all the (big) code trying to use scrolled windows only
-	when
-	needed and to size them appropriately
-
-	* lang.pm: disable wen and dns until fixed
-
-	* docs/HACKING: update (thanks to Sunny Dubey)
-
-2004/01/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.3-22mdk
-
-	* network/network.pm: fix #6944: ensure proper perms on
-	/etc/profile.d/proxy.{,c}sh
-	(pieleric@etu.utc.fr)
-
-	* network/modem.pm: remove useless LOGIN field
-	do not gratuitously reinvent write_secret_backend()
-	s/N('...')/N("...")/
-	save login in ifcfg-ppp0
-	save ip if needed
-	fix dyn/static stuff
-	fix static/dyn settings
-	  - handle PAP/CHAP auth method too
-	  - translate again strings
-	handle more kppp options from new steps
-	make sections more visible in generated kppprc conf file
-
-	* network/netconnect.pm: share same path in both standalone and in install
-	mode (2/2)
-	do not offer to enter domain name twice
-	share same path in both standalone and in install mode
-	read back auth method
-	read back new fields
-	fix gateway reading and writing
-	  - handle PAP/CHAP auth method too
-	  - translate again strings
-	use checkbow's label
-	dyn hostname is a boolean
-	  - split ppp steps into account, ip, dns and gateway parameters step
-	  - offer to configure more ip, dns and gateway parameters
-	rename ppp_choose as ppp_account
-
-2004/01/20  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: cooker logo
-
-2004/01/20  hilbert
-
-	* share/po/zh_TW.po: This is a test commit
-
-2004/01/20  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: fix mount point /tmp/image for the cdrom in generated /etc/fstab
-
-	* install_steps.pm: help perl_checker seeing charsetChanged even if known
-	install_steps_* can be seen
-	kernel 2.6 .ko adaptation
-
-	* share/advertising/Makefile: CVS has all the advertisings, but only
-	upload the dwd (download) one
-
-	* modules.pm, modules/parameters.pm: kernel 2.6 .ko adaptation
-
-	* install_steps_interactive.pm: help perl_checker seeing charsetChanged
-	even if known install_steps_* can be seen
-
-	* lang.pm: disable wen and dns until fixed
-
-	* commands.pm: cleanup & kernel 2.6 .ko adaptation
-
-2004/01/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/modem.pm: handle more kppp options from new steps
-	make sections more visible in generated kppprc conf file
-	simpkify %toreplace build
-
-	* network/netconnect.pm: use checkbow's label
-	dyn hostname is a boolean
-	  - split ppp steps into account, ip, dns and gateway parameters step
-	  - offer to configure more ip, dns and gateway parameters
-	rename ppp_choose as ppp_account
-	typo fix
-	simplify
-	go to wireless step if needed
-	always go to hostname step (shared by all paths)
-	kill old cable step
-	install requested dhcp client
-	add hidden option enabling to select dhcp client
-	skip protocol step when configuring cable connection
-	cable is like lan but with dhcp
-	set connection type at one point only
-	load adsl wizard on demand
-	(get_subwizard) introduce the infrastructure that enable to load a
-	part of a wizard from another module
-	init modem data structure when manually selecting a serial port
-	fix modem dns servers reading
-	keep entered data when stepping back to dialup options step
-	do not mix modem choice and modem configuration, so that we keep
-	entered data when stepping back and forward
-	pass dynamically build data into interactive layer when configuring
-	modems
-	fix device (was broken due to the fact we kept all the data collected
-	about modems)
-
-	* install_gtk.pm: fix set_default_direction() call
-
-	* network/adsl.pm: fix wizard layer usage (b/c of new api)
-	remove useless parameter
-
-2004/01/20  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: part. update
-
-2004/01/20  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: fix typo
-
-2004/01/20  hilbert
-
-	* share/po/zh_TW.po: This is a test commit
-
-2004/01/20  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: help perl_checker seeing charsetChanged even if known
-	install_steps_* can be seen
-	kernel 2.6 .ko adaptation
-
-	* share/advertising/Makefile: CVS has all the advertisings, but only
-	upload the dwd (download) one
-
-	* modules.pm, modules/parameters.pm: kernel 2.6 .ko adaptation
-
-	* install_steps_interactive.pm: help perl_checker seeing charsetChanged
-	even if known install_steps_* can be seen
-
-	* commands.pm: cleanup & kernel 2.6 .ko adaptation
-
-	* rescue/list: replace rpmpopt-4.2 with rpmpopt-* (since we now have
-	rpmpopt-4.2.2)
-
-2004/01/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* bootloader.pm: workaround buggy installkernel that left default value be
-	geater than
-	the current number of entries, thus making drakboot displaying
-	(default-entries_count) spurious "()*" entries which then results in
-	writing back bogus grub conf file.
-	kernel team should just be shuted down :-(
-
-	* share/po/bs.po: fix duplicate message
-	fix duplicate message
-
-	* install_gtk.pm: fix set_default_direction() call
-
-	* network/adsl.pm: fix wizard layer usage (b/c of new api)
-	remove useless parameter
-
-	* network/modem.pm: simpkify %toreplace build
-	merge ppp_configure_raw() into its only caller (ppp_configure())
-	do not bother try installing packages in testing mode
-
-	* network/netconnect.pm: load adsl wizard on demand
-	(get_subwizard) introduce the infrastructure that enable to load a
-	part of a wizard from another module
-	init modem data structure when manually selecting a serial port
-	fix modem dns servers reading
-	keep entered data when stepping back to dialup options step
-	do not mix modem choice and modem configuration, so that we keep
-	entered data when stepping back and forward
-	pass dynamically build data into interactive layer when configuring
-	modems
-	fix device (was broken due to the fact we kept all the data collected
-	about modems)
-	fix ppp_configure call
-	prepare killing obfuscated install path
-	merge in next_cnx_step into handle_multiple_cnx
-
-2004/01/19  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/ppp-04.pl: Update
-
-2004/01/19  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - add build_tree to fetch info before doing GUI stuff
-	  - use $intf->{$interface}{save} to re-use existing write_foo specific
-	fonctions
-	  - change build_notebook thing
-	  - indenting && perl_checking
-
-2004/01/19  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/01/19  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: Epiphany is now GNOME default web browser.
-
-2004/01/19  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakgw: typo error
-	add transparent proxy support
-
-	* network/network.pm: add the silly read_squid function
-
-2004/01/19  fwang
-
-	* share/po/zh_CN.po: update
-	update
-
-2004/01/19  keld
-
-	* share/po/da.po: Trying to get rid of "Translated to da.po" problem - did
-	not work:-(
-	soft/menu-messages/da.po soft/control-center/po/da.po
-	soft/drakcronat/po/da.po soft/ftw/po/da.po
-	soft/GtkMdkWidgets/po/da.po soft/kdebase-servicemenu/po/da.po
-	soft/krozat/po/da.po soft/mandrake-menu-directory/po/da.po
-	soft/mdkkdm/po/da.po soft/mdklaunchhelp/po/da.po
-	soft/menudrake/po/da.po soft/rpmdrake/po/da.po
-	soft/urpmi/po/da.po soft/userdrake2/po/da.po
-	soft/wizard_perl/po/da.po gi/perl-install/share/po/da.po
-	soft/galaxy/thememdk/mandrake_client/po/da.po
-	updates
-	soft/control-center/po/da.po soft/ftw/po/da.po
-	soft/rpmdrake/po/da.po soft/urpmi/po/da.po
-	gi/perl-install/share/po/da.po
-
-2004/01/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po, share/po/et.po: updated Estonian and Norwegian files
-
-2004/01/19  Pixel  <pixel at mandrakesoft.com>
-
-	* install_any.pm: kernel22 is not there anymore (since a long time now)
-	select bestKernelPackage before selecting basesystem (otherwise
-	basesystem already requires kernel)
-
-	* modules.pm, fs.pm: kernel 2.2 is deprecated
-
-	* bootloader.pm: cleanup sanitize_ver (re-synced with common.pm from
-	bootloader-utils)
-	add a warning telling to run lilo after modifying the lilo.conf
-	(bugzilla #6924)
-
-	* pkgs.pm: 
-	  - factorize kernel regexp in analyse_kernel_name()
-	  - remove special kernel choosing in packageCallbackChoices()
-	add some logging explaining the default kernel choice
-
-	* do_pkgs.pm: 
-	  - factorize kernel regexp in analyse_kernel_name()
-	  - remove special kernel choosing in packageCallbackChoices()
-
-	* install_steps_interactive.pm: $::testing means testing, not "testing
-	what titi wants to test"
-
-2004/01/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakgw: perl_checker fixes
-	remove empty lines in order to get more place for entry fields
-
-	* detect_devices.pm (getSerialModem) fix device field
-	(getModem) simplify
-	(getSerialModem)
-	  - drop useless first arg
-	  - return all detected serial modems, not only first
-	  - return all data we collected on serial modems
-	(getSerialModem) do not even bother check for /dev/modem since anyway
-	probeSerialDevices() set a bijection between modems and /dev/ttySx
-	devices (not /dev/modem) thus making hasModem() test useless for
-	/dev/modem
-	(getUPS) use HIDIOCAPPLICATION ioctl definition from c module
-
-	* share/po/br.po: minor update
-	update
-	update
-
-	* ugtk2.pm (reate_box_with_title) shrink TextView size to its minimal size
-	in
-	order to get the bigger place for other widgets
-
-	* network/modem.pm (ppp_configure_raw) remove code stolen from
-	ppp_configure()
-
-	* interactive/gtk.pm: prevent unpoped wait messages when called from
-	within wizards in standalone
-	mode
-	remove useless spacing above advanced options
-
-	* network/netconnect.pm: 
-	  - kill duplicated code
-	  - move some code where it belongs so that it's shared by isdn/modem
-	  - merge wireless step into normal modem one
-	  - report all detected serial modems
-	  - use all collected data on modems in order to have a nice list
-	rollback bogus change
-	dot not try to alter squid config in --testing mode
-	isdn: detect serial modems if needed
-	rename "ppp_choose step" as "choose_serial_port" and "ppp_choose2" one
-	as "ppp_choose"
-	chain hostname/dns step with zeroconf one (more work on zeroconf will
-	be done between beta 1 and 2)
-	turn "unsupported winmodem" into a terminal step
-	add strings for future options
-	fix next_cnx_step call
-	(detect) display a nice string for serial modems
-	(detect)
-	  - adapt modem detection to new detect_devices
-	  - keep all data collected on modems
-	add proper window title
-	make a real wizard step out of first modem step
-	winmodem connection'll be merge into modem connection
-	kill Data::Dumper orphean
-	merge dhcp hostname into hostname step
-	use radio button instead of optionmenu if possible (aka not too many
-	network interfaces)
-
-	* standalone/drakbug: simplify
-
-	* share/po/cy.po: add missing empty lines
-	another update
-	further update
-	update
-
-	* share/po/fr.po: update
-
-	* standalone/drakconnect: kill useless diagnostics pragma
-
-2004/01/18  fwang
-
-	* share/po/zh_CN.po: update
-
-2004/01/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/cy.po: update
-	update
-
-	* share/po/fr.po: 
-	  - typo fix (#6919)
-	  - let drakconnect message be wrapped by gtk+ rather than us
-
-2004/01/17  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/dwd-09.pl: Fix (r)
-
-2004/01/17  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: add wait message as hardware detection takes
-	time
-
-2004/01/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/po/hu.po: udated pot file; converted to UTF-8 all po files (as
-	therer are utf-8 msgid
-
-	* diskdrake/hd_gtk.pm: spell checking
-
-2004/01/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: fix obvious typo
-	update
-	fix doble entries
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/nb.po,
-	share/po/uz.po, share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/lv.po, share/po/hu.po, share/po/fa.po,
-	share/po/id.po, share/po/ru.po, share/po/sl.po, share/po/uz@Cyrl.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/po/mn.po, share/po/lt.po, share/po/cy.po, share/po/tg.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/nl.po, share/po/de.po, share/po/eo.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po: fix doble entries
-
-	* ugtk2.pm: fix #6899: tools failling to popup windows while embedded
-
-	* share/po/br.po: update
-	fix doble entries
-
-	* share/advertising/dwd-08.pl, share/advertising/dwd-04.pl,
-	share/advertising/dis-11.pl, share/advertising/ppp-11.pl,
-	share/advertising/ppp-09.pl, share/advertising/dwd-05.pl,
-	share/advertising/pwp-09.pl, share/advertising/dwd-06.pl,
-	share/advertising/ppp-07.pl, share/advertising/pwp-10.pl,
-	share/advertising/ppp-05.pl, share/advertising/dis-09.pl,
-	share/advertising/ppp-04.pl, share/advertising/pwp-04.pl,
-	share/advertising/pwp-08.pl: fix package build
-
-2004/01/16  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: * manage interfaces:
-	  - fix Ok button logic
-	  - fix some calls to $apply
-	* manage interfaces
-	  - added Modem page
-	  - most of the GUI in place
-
-2004/01/16  Pixel  <pixel at mandrakesoft.com>
-
-	* network/shorewall.pm: fix N() badly used
-	  - add icmp support
-	  - add "Echo request (ping)" choice
-
-	* network/drakfirewall.pm: 
-	  - add icmp support
-	  - add "Echo request (ping)" choice
-
-2004/01/16  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakTermServ: ask_warn fixes per
-	Thierry, purge some old, unused code
-
-2004/01/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/tools.pm: prevent faillure when trying to dereference undef in
-	testing mode
-
-	* install_steps_interactive.pm (Accept) default to accept in testing mode
-	do not complain about root password in testing mode
-
-	* network/adsl.pm, network/isdn.pm, network/ethernet.pm: do not export
-	dead functions
-
-	* share/po/da.po: rollback bogus change
-	remove arrows from previous/next buttons according to interface team
-
-	* network/modem.pm (ppp_configure) reintroduce it for drakconnect's
-	manager
-
-	* network/network.pm: do not alter proxies config while configuring
-	network interfaces (needed since
-	we've disabled proxy config in network interface config path)
-	do not install zeroconf if no zeroconf hostname was typed in (we may add
-	a
-	USE_ZEROCONF variable to /etc/sysconfig/network instead)
-
-	* network/netconnect.pm: new host settings step
-	clean horrible code
-	split/merge lan config steps according to new specs
-	(card => protocol => parameters => hostname)
-	rollback "separate standalone and install paths" try (just too painful
-	to
-	maintain and anyway install net wizard has no logic)
-	  - make a real step out of "manage multiple internet connections" case
-	  - factorize and fix accessing to this step
-	drop proxy configuration step.
-	rationale:
-	  - miscellaneous_choose() was reintroduced in network::network since it
-	was still
-	  needed by drakproxy
-	  - anyway configuring proxies is:
-	  o not supposed to be done while configuring network interfaces
-	  o duplicated with drakproxy and the like
-	  o removed in new drakconnect specs
-	morph hw_account step through reusing new wizard layer capabilites (aka
-	dynamically return just build needed data rather than ackwardly puting
-	it in
-	place)
-	fix ppp_first_step() call
-	small reindenting
-	remove overrided variables
-	enable to step forward after to "connect now?" step since wizard
-	infrastructure fixed the ask_yesorno design flaw (and remove bug hint
-	left by
-	previous maintainers)
-	use wizard layer 's yesorno type
-	typo fix
-
-	* share/po/ms.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/th.po, interactive.pm, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/be.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/he.po, standalone/drakbackup, share/po/ca.po, share/po/ar.po,
-	share/po/nb.po, share/po/uz.po, share/po/ro.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/lv.po, share/po/hu.po,
-	printer/printerdrake.pm, share/po/fa.po, share/po/id.po,
-	drakxtools.spec, share/po/ru.po, help.pm, share/po/br.po,
-	share/po/sl.po, share/po/uz@Cyrl.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/uk.po, share/po/mn.po, share/po/lt.po,
-	share/po/cy.po, share/po/tg.po, install_steps_gtk.pm, share/po/bs.po,
-	interactive/newt.pm, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/nl.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po: remove arrows from previous/next buttons according to
-	interface team
-
-	* standalone/drakconnect: kill unused variables
-
-	* standalone/logdrake: 
-	  - set a meaningfull window title when called from mcc for explanations
-	  - upcase default window title
-	do not abuse global namespace (this also allow to track variables
-	usage through static code analysers such as perl_checker)
-
-2004/01/15  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/01/15  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_gtk.pm: fix individual package selection (was broken since
-	30 september...)
-	formatList is imported, no need to get it in common::
-
-	* c/stuff.xs.pl, diskdrake/interactive.pm, fsedit.pm,
-	install_interactive.pm, partition_table/raw.pm, partition_table.pm: 
-	  - remove the use of BLKRRPART (telling the kernel to re-read the
-	partition table) in most cases
-	  - replace with tell_kernel() and will_tell_kernel()
-	  - correctly handle in standalone the need to reboot, with no way to
-	forget it
-	(telling the WM to quit nicely then call reboot when it's done)
-
-	* rescue/list: insmod.old is needed when the kernel is a 2.4
-
-	* lvm.pm: adaptation/simplification for new lvm2 (thanks to Luca Berra)
-
-	* share/rpmsrate: have hylafax-client installed when kdebase-kdeprintfax
-	is selected
-
-	* bootloader.pm: don't modify {append} after add_kernel(), call
-	add_kernel() directly with the append parameter
-	(so that comparison with previous entries is done correctly)
-
-2004/01/15  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: First time wizard
-
-2004/01/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po: update
-	update
-
-	* standalone/drakboot: add bug hint
-	remove unused variable
-	(lilo_choice) do not complain on canceling
-	(lilo_choice) let's set dialog title when poping up an error message
-	(lilo_choice) do not complaing about lilo faillure when we use another
-	bootloader: just complain about the actually used bootloader
-	warly said that we should not restrict ourselves to lilo
-	make splash config looks better when embedded
-
-	* standalone/drakups: reuse create_okcancel() in ordet to get some std
-	button layout
-	remove useless menu infrastucture
-
-	* drakxtools.spec: require a fixed perl-Glib
-	fix changelog
-	9.3-21mdk
-	9.3-20mdk
-
-	* ugtk2.pm: do not create spurious top window when embedded (why does this
-	fsck us
-	only now?)
-
-2004/01/14  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/README, share/advertising/dis-06.pl,
-	share/advertising/dis-05.png, share/advertising/dwd-08.pl,
-	share/advertising/pwp-02.pl, share/advertising/dwd-04.pl,
-	share/advertising/06-development.pl, share/advertising/01-thanks.png,
-	share/advertising/dis-10.png, share/advertising/dwd-07.png,
-	share/advertising/dis-02.pl, share/advertising/ppp-06.png,
-	share/advertising/dis-04.pl, share/advertising/02-community.png,
-	share/advertising/pwp-05.png, share/advertising/11-mnf.png,
-	share/advertising/02-community.pl, share/advertising/05-desktop.pl,
-	share/advertising/dis-11.pl, share/advertising/01-thanks.pl,
-	share/advertising/dwd-04.png, share/advertising/dis-10.pl,
-	share/advertising/ppp-11.pl, share/advertising/08-store.pl,
-	share/advertising/pwp-07.pl, share/advertising/08-store.png,
-	share/advertising/pwp-08.png, share/advertising/dwd-03.png,
-	share/advertising/dwd-02.pl, share/advertising/12-mdkexpert.png,
-	share/advertising/dis-05.pl, share/advertising/06-development.png,
-	share/advertising/ppp-09.pl, share/advertising/11-mnf.pl,
-	share/advertising/dis-03.png, share/advertising/dwd-01.pl,
-	share/advertising/dwd-08.png, share/advertising/dis-01.pl,
-	share/advertising/pwp-06.png, share/advertising/dis-07.pl,
-	share/advertising/pwp-02.png, share/advertising/list,
-	share/advertising/dwd-05.pl, share/advertising/ppp-06.pl,
-	share/advertising/ppp-07.png, share/advertising/pwp-09.png,
-	share/advertising/ppp-10.pl, share/advertising/dis-03.pl,
-	share/advertising/dwd-09.png,
-	share/advertising/13-mdkexpert_corporate.png,
-	share/advertising/pwp-07.png, share/advertising/pwp-09.pl,
-	share/advertising/pwp-04.png, share/advertising/pwp-05.pl,
-	share/advertising/dis-01.png, share/advertising/10-security.png,
-	share/advertising/07-server.pl, share/advertising/dwd-06.png,
-	share/advertising/dis-08.png, share/advertising/pwp-01.png,
-	share/advertising/ppp-08.png, share/advertising/ppp-03.pl,
-	share/advertising/07-server.png, share/advertising/dis-08.pl,
-	share/advertising/dwd-02.png, share/advertising/pwp-06.pl,
-	share/advertising/dis-07.png, share/advertising/ppp-03.png,
-	share/advertising/dwd-03.pl, share/advertising/ppp-01.png,
-	share/advertising/03-software.png, share/advertising/ppp-08.pl,
-	share/advertising/dis-02.png, share/advertising/dwd-06.pl,
-	share/advertising/10-security.pl, share/advertising/Makefile,
-	share/advertising/pwp-03.png, share/advertising/ppp-05.png,
-	share/advertising/ppp-02.pl, share/advertising/dwd-07.pl,
-	share/advertising/ppp-07.pl, share/advertising/dis-09.png,
-	share/advertising/09-mdksecure.png, share/advertising/ppp-04.png,
-	share/advertising/ppp-11.png, share/advertising/pwp-10.pl,
-	share/advertising/ppp-09.png, share/advertising/dis-06.png,
-	share/advertising/ppp-10.png, share/advertising/dis-11.png,
-	share/advertising/dis-04.png, share/advertising/03-software.pl,
-	share/advertising/pwp-10.png, share/advertising/09-mdksecure.pl,
-	share/advertising/13-mdkexpert_corporate.pl,
-	share/advertising/12-mdkexpert.pl, share/advertising/ppp-05.pl,
-	share/advertising/ppp-01.pl, share/advertising/dis-09.pl,
-	share/advertising/pwp-03.pl, share/advertising/04-configuration.png,
-	share/advertising/dwd-01.png, share/advertising/ppp-04.pl,
-	share/advertising/dwd-05.png, share/advertising/pwp-04.pl,
-	share/advertising/pwp-01.pl, share/advertising/ppp-02.png,
-	share/advertising/05-desktop.png, share/advertising/pwp-08.pl,
-	share/advertising/04-configuration.pl, share/advertising/dwd-09.pl: New
-	texts to translate for next release.
-	Images will be modified in a short time.
-
-2004/01/14  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - manage interfaces :
-	o add Account page
-	  o speedtouch and sagem modems
-	  o build_notebook don't need $window anymore
-	  o cosmetic change to Infornations page
-
-2004/01/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po: updated pot file
-
-2004/01/14  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: don't write fstab entries which are notFormatted
-
-2004/01/14  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Let list of printer models get sorted.
-
-2004/01/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update
-	update
-
-	* drakxtools.spec: 9.3-19mdk
-
-	* network/network.pm (miscellaneous_choose) restore it for drakproxy (we'd
-	better split out
-	network interface and proxy configuration at install time)
-
-	* standalone/drakboot: typo fix
-	use class->new rather than new class style
-	minor cleanup
-	perl_checker cleanups
-	proper indenting
-	  - offer to configure bootsplash only on --splash
-	  - drop useless frames
-	  - set main window title according to current mode (autologin,
-	bootloader or bootsplash)
-
-	* install_steps_interactive.pm: proxy conf: do not touch files in
-	--testing mode
-	split out proxy configuration out of network interfaces configuration
-
-	* standalone/drakautoinst: 
-	  - kill unused variables
-	  - fix gtk+2 notebook usage
-	  - perl_checker cleanups
-
-	* any.pm: move bootloader title from drakboot
-
-	* standalone/drakclock: unused variable
-
-	* network/tools.pm: ask_info2 is dead
-
-	* install2.pm: fix fix
-	fix logic test order in order to prevent useless error message in
-	--testing mode
-
-	* wizards.pm: using box radio looks better for yes/no like questions
-	(process) in yes/no case, keep the same logic as
-	interactive->ask_yesorno() and pass 1 if /yes/ and undef else
-
-2004/01/14  Warly  <warly at mandrakesoft.com>
-
-	* standalone/drakboot: clean splash management code
-
-2004/01/13  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/Makefile: cookr
-
-	* pkgs.pm: perl check
-	allow DRIVER"regexp" in rpmsrate and use it to install xmms-alsa when we
-	use alsa sound driver
-
-	* share/rpmsrate: allow DRIVER"regexp" in rpmsrate and use it to install
-	xmms-alsa when we use alsa sound driver
-
-	* Xconfig/card.pm, common.pm, detect_devices.pm, modules.pm:
-	detect_devices::matching_driver -> matching_desc but matching driver
-	names (kernel modules)
-
-	* any.pm: changing utf8 flag on an installed OS is not supported
-
-2004/01/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po, share/po/et.po: updated Estonian and Norwegian files
-
-2004/01/13  Pixel  <pixel at mandrakesoft.com>
-
-	* devices.pm: lvm2 uses urandom
-
-	* lvm.pm: lvm2 uses urandom
-	  - install lvm2 rpm instead of lvm (and using ->ensure_is_installed)
-	  - "vgdisplay" error status is not good, using "vgs" instead
-
-	* diskdrake/smbnfs_gtk.pm: revert titi breaking the code, keeping the only
-	valid change
-
-2004/01/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakautoinst: alter message according to interface team
-	suggestion
-
-	* ugtk2.pm: 
-	  - "Next->" => "Next"
-	  - "<-Previous" => "Previous"
-	enable to access extra buttons $w->{buttons}{<label>}
-	do not pack empty label before extra buttons if there'll be no button
-	before it
-	rationale: when there's no cancel button, packing an empty label
-	instead of the cancel button results in extra buttons (eg: help,
-	advanced) to be shifted with a space before;
-
-	* standalone/drakboot, standalone/draksec, standalone/drakconnect:
-	sanitize buttons through reusing create_okcancel()
-
-	* standalone/drakedm: perl_checker sometimes wrongly complain
-
-	* standalone/drakfloppy: sanitize buttons through reusing
-	create_okcancel()
-	upcase label
-
-	* share/po/fr.po: typo fix
-
-	* standalone/drakfont: hide about butto b/c there's already mcc about
-	dialog and there're
-	already too much buttons
-	sanitize buttons through reusing create_okcancel()
-
-	* standalone/drakperm, standalone/drakclock: alter message according to
-	interface team suggestion
-	sanitize buttons through reusing create_okcancel()
-
-	* wizards.pm: add support for yes/no questions
-	better rely on the end field being set rather than on the last step to
-	be named "end" (thus allowing to have several different last steps)
-
-2004/01/12  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/01/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* pixmaps/langs/lang-sr.png: changed the Serbian cyrillic image to display
-	using cyrillic.
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po: updated pot file
-
-	* lang.pm: adding spaces to please perl_checker
-	Added to the language selection menu languages with recently appeared
-	translations in Gnome or KDE (fo, ia, ku, nds, ne, oc, wen, yi)
-
-2004/01/12  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: used the ip from stage1 instead of using IPADDR which is
-	not given for dhcp
-	for auto_install file (as asked by Michael Riss)
-
-	* install_gtk.pm: wacom support should be re-added :-/
-
-2004/01/12  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: Added functionality to
-	configure a PostScript printer with a
-	manufacturer-supplied PPD file.
-
-2004/01/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakedm: perl_checker cleanups
-
-	* drakxtools.spec: 9.3-18mdk
-
-	* standalone/drakfloppy: handle both kernel 2.4.x and 2.6.x (before size
-	field was not properly
-	when switching between threes b/c we looked for module.ko instead of
-	module.o.gz and the like)
-
-	* standalone/drakfont: upcase first letter of error messages
-	perl_checker fixes
-	new layout with subdialogs
-	remove spurious minus at beginning of paragraph
-
-	* standalone/printerdrake: do not push anymore help menu at right (hig and
-	kde guidelines are
-	against this)
-
-2004/01/12  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/01/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po: updated pot file
-
-2004/01/12  Pixel  <pixel at mandrakesoft.com>
-
-	* share/list: need insmod.old for kernel 2.4
-
-	* install_gtk.pm: wacom support should be re-added :-/
-	XFree4 during install
-
-	* install2.pm: used the ip from stage1 instead of using IPADDR which is
-	not given for dhcp
-	for auto_install file (as asked by Michael Riss)
-
-	* install_steps_gtk.pm, share/list.i386: XFree4 during install
-
-	* network/drakfirewall.pm: allow a range of ports (anthill bug #267)
-
-	* run_program.pm: don't print refs in log when output is redirected
-	(nice patch from blino :)
-
-	* do_pkgs.pm, install_steps.pm, interactive.pm: 
-	  - install_steps_auto_install is not a interactive but still needs
-	do_pkgs
-	  - so making do_pkgs a class, and interactive and install_steps will
-	inheritate from it
-	  - do_pkgs renamed into do_pkgs_common, containing the things common to
-	do_pkgs_during_install and do_pkgs_standalone
-
-	* docs/HACKING: update from sunny@opencurve.org
-
-2004/01/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: bump perl(Gtk2) require
-	9.3-17mdk
-
-	* standalone/drakfont: new layout with subdialogs
-	remove spurious minus at beginning of paragraph
-	make font removing working with --testing
-	fix unstalling fonts
-	kill unused variables
-	(put_font_dir) factorize some code into put_font_dir_real()
-	fix chkfontpath call in --testing mode (/usr/sbin) not in path
-	fix applications layout:
-	  - remove spurious empty boxes
-	  - fix layout (aka do not uselessly resize main window)
-	  - sanitize layout (put legal warning between title and application
-	list)
-	  - "[X] label" packing looks quite a less uglier than "label
-	[X]"
-	fix about layout:
-	  - sanitize horrible line breaking (let pango do it for now, it know
-	how to do
-	it quite a lot better than we)
-	  - add myself in author list
-	  - split about translation in three pieces (copyright holders, std fsf
-	header
-	  and thanks), enabling to share std fsf legal header among several
-	programs
-	prevent useless spacing above button bar
-	enforce class->new calling convention rather than "new class" one
-	style only change; "fix" gtkpacking so that expand arg always precede
-	the
-	widget it's about rather that following another widget
-
-	* Makefile: handle poulpy code
-
-	* standalone/drakedm: perl_checker cleanups
-	when offering to restart dm, offer yes/no as choice rather than
-	ok/cancel (#6810)
-
-	* interactive/gtk.pm: fix embedding:
-	  - prevent subwindows being too small
-	  - prevent subwindows breaking when canceled
-
-	* standalone/drakconnect: show a finish button on last step
-	exit once delete interface wizard has ended instead of then running the
-	std
-	add wizard...
-	list ppp interfaces too when offering to delete an interface
-
-	* diskdrake/smbnfs_gtk.pm (per_entry_action_box)
-	  - sanitieze buttons packing (do not eat extra space)
-	  - get rid of groupby2
-
-	* share/po/fr.po: typo fix
-	update
-	fix french translation: always translate "NONE" as "AUCUN" in draksec
-
-	* wizards.pm: rollback debug statements
-	only complain if a problem actually happened
-
-2004/01/10  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-	last messages updated
-
-2004/01/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* standalone/drakconnect, standalone/scannerdrake: fixed typos
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/mn.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/nb.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/mk.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/hi.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po: big pot file update
-
-2004/01/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: fix changelog
-	one more fix
-
-2004/01/09  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - apply and ok button now working
-	  - some clean up
-
-2004/01/09  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive.pm, do_pkgs.pm, standalone.pm: new do_pkgs package which get
-	rid of pkgs_interactive::* which was in install_any
-	and standalone, and partially duplicated
-
-2004/01/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/logdrake: fix wizard when logdrake is embeded
-
-	* ugtk2.pm: handle exceptions with Glib-1.020/Gtk2-1.022
-	(gtktext_insert) make it works with both Glib-0.95/Gtk2-0.95 and
-	Glib-1.020/Gtk2-1.022
-
-	* drakxtools.spec: 9.3-16mdk
-	9.3-15mdk
-
-	* standalone/drakboot: fix drakboot --boot embedding
-
-2004/01/09  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: information box fully fonctionnal for ethernet
-	cards
-
-2004/01/09  Pixel  <pixel at mandrakesoft.com>
-
-	* share/po/Makefile: get translated strings in directory gi/perl-install
-	to have xxx.pm instead of ../../xxx.pm
-
-	* install_any.pm: http://serv.mydomain/pub/install must get split into
-	server:serv.mydomain and
-	directory:/pub/install, and not directory:pub/install
-	simplify
-
-	* interactive.pm, do_pkgs.pm: new do_pkgs package which get rid of
-	pkgs_interactive::* which was in install_any
-	and standalone, and partially duplicated
-
-	* fs.pm, install_steps_gtk.pm: remove a few other SIG{__DIE__}
-
-	* standalone.pm: new do_pkgs package which get rid of pkgs_interactive::*
-	which was in install_any
-	and standalone, and partially duplicated
-	perl_checker compliance
-	simplify, cleanup
-
-2004/01/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: share translations with harddrake
-
-	* harddrake/data.pm: tag megaraid controllers as scsi ones
-
-	* common.pm: enable other packages to override libDrakx translations with
-	those
-	from their own domains (eg: prevent mcc to display "partition de
-	demarrage" instead of "demarrage" in french for "boot" ...)
-
-	* share/po/br.po: update
-
-2004/01/08  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - informations afford copy/paste (mac address)
-	  - add module name to informations
-	  - perl_checker compliant
-
-2004/01/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-2004/01/08  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/drakauth, any.pm, authentication.pm, install_any.pm,
-	install_steps_interactive.pm: 
-	  - integrate chkauth (which is now deprecated)
-	  - new module authentication
-
-	* install_steps_auto_install.pm: display the error
-
-	* common.pm: better override formatError than replacing all the
-	formatError with formatError_and_log
-	(goal: get log'ing even now that SIG{__DIE__} is not there anymore)
-	add formatError_and_log (to get log'ing even now that SIG{__DIE__} is
-	not there anymore)
-
-	* install2.pm: no need to log the error twice, errorInStep will take care
-	of it
-	display the error
-
-2004/01/08  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: fix sagem net_cnx_up (thanks to QA team)
-
-	* standalone/drakconnect: first 'manage interface'
-	implementatiimplementation
-
-	* drakxtools.spec: new version
-
-2004/01/08  Pixel  <pixel at mandrakesoft.com>
-
-	* Makefile: runinstall2 is deprecated, install2 is called directly
-
-	* share/aliases: i thought stage1 didn't call runinstall2 anymore...
-	what's wrong with me??
-	runinstall2 is deprecated, install2 is called directly
-
-	* install2.pm: no need to log the error twice, errorInStep will take care
-	of it
-	display the error
-
-	* diskdrake/interactive.pm, Xconfig/resolution_and_depth.pm: perl_checker
-	compliance
-
-	* network/smb.pm, diskdrake/smbnfs_gtk.pm: authentification is french, the
-	english word is authentication
-
-	* bootloader.pm: drop keytable line in grub config file since grub doesn't
-	handle it anymore
-	(patch dropped long ago in grub 0.90-3mdk)
-	  - simplify lilo boot message. Not mentioning the timeout parameter
-	fixes bugzilla #5429
-	  - remove /boot/grub/messages and don't use the i18n command which are
-	obsolete
-	  since grub doesn't handle it anymore
-
-	* standalone/drakauth, any.pm, authentication.pm,
-	install_steps_interactive.pm, install_any.pm: 
-	  - integrate chkauth (which is now deprecated)
-	  - new module authentication
-
-	* services.pm: add a fam description (telling that GNOME & KDE uses it).
-	closes part of bugzilla #1704
-
-	* common.pm: better override formatError than replacing all the
-	formatError with formatError_and_log
-	(goal: get log'ing even now that SIG{__DIE__} is not there anymore)
-	add formatError_and_log (to get log'ing even now that SIG{__DIE__} is
-	not there anymore)
-
-	* install_steps_auto_install.pm: display the error
-
-2004/01/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakbackup: merge back drakbacup update
-
-	* ugtk2.pm: add a separator below buttons on fredc request
-
-	* drakxtools.spec: merge in spec file from update SRPM
-
-	* network/adsl.pm: fordward sagem net_cnx_up fix
-
-	* standalone/drakconnect (configure_net)
-	  - make buttons smaller
-	  - follow button std order
-	move all options parsing pieces together
-	restore exit_dialogsub
-	(configure_net)
-	when there's no connection:
-	  - fix message for new drakconnect scheme
-	  - shrink code by reusing interactive
-
-2004/01/07  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2004/01/07  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm, standalone/diskdrake: logging when __DIE__ing is dangerous:
-	  - in diskdrake, logging the error via c::syslog caused $@ to be
-	undefined, causing the error to be dropped! (esp "you need to reboot")
-	  - during install, no known error, but it's better to remove it anyway
-	(bye bye the "warning: ..." in ddebug.log, sniff)
-
-	* pkgs.pm: handle lilo not installed
-
-	* install_any.pm: use whereis_binary()
-
-	* Makefile.config: livedrake is deprecated/removed
-
-	* bootloader.pm: handle lilo not installed
-	pass --splash <resolution> to mkinitrd
-	(so that make-boot-splash doesn't rely on lilo.conf or menu.lst)
-
-	* run_program.pm: when called from commands.pm, install_any is not loaded
-
-	* any.pm, Xconfig/resolution_and_depth.pm: pass --splash <resolution> to
-	mkinitrd
-	(so that make-boot-splash doesn't rely on lilo.conf or menu.lst)
-
-	* drakxtools.spec: we need latest perl-MDK-Common
-
-2004/01/07  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: DVD+RW support, perl_checker, fix bogus cron
-	message
-
-2004/01/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/br.po, share/po/fr.po: update
-
-	* standalone/service_harddrake, modules.pm, c/stuff.xs.pl,
-	network/ethernet.pm, drakxtools.spec: fixes merged from head into
-	updates
-
-2004/01/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po, share/po/ms.po, share/po/id.po, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/th.po,
-	share/po/sl.po, share/po/uz@Cyrl.po, share/po/et.po, share/po/ja.po,
-	share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/mn.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/nb.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/mk.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/hi.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/nl.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/lv.po, share/po/el.po, share/po/bg.po, share/po/cs.po,
-	share/po/hu.po: updated pot file
-
-2004/01/06  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: perl_checker compliance
-	get rid of g_auto_install (unused & not working)
-
-	* Xconfig/card.pm, live_install, Makefile.config, install_gtk.pm,
-	standalone/livedrake, modules.pm, live_install2: obsolete livedrake,
-	live_install, live_update
-
-	* g_auto_install: get rid of g_auto_install (unused & not working)
-
-	* install_any.pm: obsolete livedrake, live_install, live_update
-	perl_checker compliance
-	use $::prefix
-	get rid of g_auto_install (unused & not working)
-
-	* detect_devices.pm: perl_checker compliance
-	obsolete livedrake, live_install, live_update
-
-	* standalone/adduserdrake, partition_table/mac.pm, standalone/XFdrake,
-	fsedit.pm, commands.pm, standalone/localedrake, partition_table.pm:
-	perl_checker compliance
-
-	* drakxtools.spec: obsolete live_update
-
-	* install_steps.pm: obsolete livedrake, live_install, live_update
-	use $::prefix
-	get rid of g_auto_install (unused & not working)
-
-	* standalone/drakclock: perl_checker compliance
-	use $::prefix
-
-	* Makefile, install2.pm: obsolete livedrake, live_install, live_update
-	get rid of g_auto_install (unused & not working)
-
-	* timezone.pm: use $::prefix
-
-	* install_steps_interactive.pm: perl_checker compliance
-	perl_checker compliance
-	perl_checker compliance
-	use $::prefix
-	get rid of g_auto_install (unused & not working)
-
-2004/01/06  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: kill unused variables
-
-2003/09/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uk.po, share/po/it.po: updated Basque, Italian and Ukrainian
-	files
-
-	* share/po/eu.po: updated Basque file
-	updated Basque, Italian and Ukrainian files
-
-	* share/po/nl.po: updated Dutch file
-
-2003/09/22  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps.pm: avoid mounting partitions in recovery mode.
-
-	* network/netconnect.pm: make sure module are loaded only during
-	installation.
-
-	* install2.pm: keep use_existing_root for recovery (behaviour changed
-	later)
-
-	* pkgs.pm: simplified code.
-	use kernel-i686 or kernel-enterprise as other kernel.
-
-2003/09/22  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: fix error message
-
-	* detect_devices.pm: dmi doesn't detect ht, but acpi does, so use it
-
-2003/09/22  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Bug 5916, all users overrides individual
-	selection in wizard.
-
-2003/09/22  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* pkgs.pm: simplified code.
-	use kernel-i686 or kernel-enterprise as other kernel.
-
-	* network/netconnect.pm: make sure module are loaded only during
-	installation.
-
-	* install2.pm: keep use_existing_root for recovery (behaviour changed
-	later)
-
-	* install_steps.pm: avoid mounting partitions in recovery mode.
-
-2003/09/22  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: fix error message
-
-	* detect_devices.pm: dmi doesn't detect ht, but acpi does, so use it
-
-2003/09/22  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_gtk.pm: try to follow what is wrong when requiring
-	multiple cds.
-
-	* install_steps.pm: avoid mounting partitions in recovery mode.
-	avoid urpmi source in oem to use cdrom (we now use disk instead,
-	avoiding
-	supermount problems).
-
-	* pkgs.pm: simplified code.
-	use kernel-i686 or kernel-enterprise as other kernel.
-
-	* network/network.pm: simplified perl writing, make sure bool2yesno has a
-	chance to be called for MII_NOT_SUPPORTED
-	fixed strange perl writing sense less...
-
-	* install2.pm: keep use_existing_root for recovery (behaviour changed
-	later)
-
-	* network/netconnect.pm: make sure module are loaded only during
-	installation.
-	try loading boot kernel modules before trying to start internet
-	connection...
-
-2003/09/22  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: dmi doesn't detect ht, but acpi does, so use it
-
-	* fs.pm: fix error message
-
-	* rescue/tree/etc/oem-all: 
-	  - fix typo
-	  - add CVS Id
-
-2003/09/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po, share/po/fa.po, share/po/eu.po, share/po/bs.po,
-	share/po/zh_CN.po, share/po/pt_BR.po, share/po/it.po: updated Bosnian,
-	Basque, Farsi, Italian, Portuguese and Chinese files
-
-2003/09/21  Pixel  <pixel at mandrakesoft.com>
-
-	* lang.pm: allowing consolefonts to be ungzip'ed (adapting to new
-	console-tools) (thanks to Mark Draheim)
-
-2003/09/20  keld
-
-	* share/po/da.po: Updates
-	soft/ftw/po/da.po gi/perl-install/share/po/da.po
-
-2003/09/19  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: switch the other way too
-	switch to kdebase-kdm while the reboot options aren't fixed
-
-2003/09/19  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* rescue/tree/etc/oem-all: updated with oem
-	fixed too many files copied.
-
-	* rescue/tree/etc/oem: fixed severe bug of directory not created.
-	fixed too many files copied.
-
-2003/09/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/is.po: updated Icelandic file
-
-	* share/po/vi.po, share/po/sv.po, share/po/de.po, share/po/pt_BR.po:
-	updated German, Brazilian, Swedish and Vietnamese files
-
-2003/09/19  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: next FreeWnn is not a naughtyServers anymore
-	final update naughtyServers for 9.2
-
-2003/09/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-16mdk
-
-	* standalone/drakconnect: fix the fix
-	fix #5825 (hostname set as ARRAY(0x...))
-
-2003/09/19  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: do not install lisa by default (reduce to 3)
-
-2003/09/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/is.po: updated Icelandic file
-
-	* share/po/pl.po, share/po/hu.po, share/po/cs.po, share/po/pt_BR.po,
-	share/po/zh_TW.po, share/po/fi.po, share/po/ja.po, share/po/az.po:
-	updated Azeri, Czech, Finnish, Hungarian, Japanese, Polish,
-	Brazilian and Chinese files
-
-2003/09/19  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: next FreeWnn is not a naughtyServers anymore
-	final update naughtyServers for 9.2
-
-2003/09/18  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: last license message update
-
-2003/09/18  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/09/18  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/probing.c, mdk-stage1/disk.c: close file descriptors
-
-2003/09/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-2003/09/18  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: update naughtyServers
-
-2003/09/18  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/09/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: one more typo fix
-	typo fix
-	9.2-15mdk
-
-2003/09/18  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: last license message update
-
-2003/09/18  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Add kdemultimedia-common to allow kaudiocreator to work
-
-2003/09/18  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* share/rpmsrate: added kdeutils in rpmsrate to help upgrading it.
-
-2003/09/18  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/probing.c, mdk-stage1/disk.c: close file descriptors
-
-2003/09/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/sq.po: updated Albanian file
-	updated pot file
-
-	* share/po/nb.po: updated Norwegian file
-	updated pot file
-
-	* share/po/eo.po, share/po/da.po, share/po/uz@Cyrl.po, share/po/sl.po,
-	share/po/sv.po, share/po/hu.po, share/po/fa.po, share/po/de.po,
-	share/po/sr@Latn.po, share/po/ga.po, share/po/it.po, share/po/cy.po,
-	share/po/wa.po, share/po/vi.po, share/po/fi.po, share/po/ru.po,
-	share/po/gl.po, share/po/af.po, share/po/ar.po, share/po/pl.po,
-	share/po/pt_BR.po, share/po/lt.po, share/po/el.po, share/po/zh_CN.po,
-	share/po/id.po, share/po/eu.po, share/po/sr.po, share/po/ja.po,
-	share/po/be.po, share/po/uk.po, share/po/hr.po, share/po/th.po,
-	share/po/nl.po, share/po/ca.po, share/po/DrakX.pot, share/po/bg.po,
-	share/po/lv.po, share/po/ta.po, share/po/he.po, share/po/ro.po,
-	share/po/fr.po, share/po/ko.po, share/po/bs.po, share/po/mt.po,
-	share/po/sk.po, share/po/es.po, share/po/tr.po, share/po/az.po,
-	share/po/is.po, share/po/ms.po, share/po/uz.po, share/po/cs.po,
-	share/po/pt.po, share/po/zh_TW.po, share/po/tg.po: updated pot file
-
-2003/09/18  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: update naughtyServers
-
-	* modules.pm: don't "probeall scsi_hostadapter usb-storage" (as requested
-	by flepied and planel)
-
-	* install_steps_gtk.pm: the install package dialog box must be explictly
-	destroyed when quitting
-	installation (esp. this occurs when answering "No" to "There was an
-	error
-	installing packages")
-	rationale: the $w (created with ugtk2->new) is not reference counted
-	correctly
-	(it was already workarounded when leaving installPackages the normal
-	way)
-
-2003/09/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-15mdk
-
-	* install_steps_interactive.pm: fix slot number when configuring sound
-	cards
-
-	* harddrake/sound.pm: prevent some obscure crash at install time
-	when installing, remember the new sound driver so that the user isn't
-	confused if he ever want to configure it again
-
-2003/09/18  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: last license message update
-
-2003/09/18  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Add kdemultimedia-common to allow kaudiocreator to work
-
-2003/09/18  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* rescue/tree/etc/oem-all: updated with oem
-
-	* share/rpmsrate: added kdeutils in rpmsrate to help upgrading it.
-
-	* rescue/tree/etc/oem: fixed for %{ARCH} used in hdlists.
-
-2003/09/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/bs.po, share/po/zh_TW.po, share/po/pt_BR.po,
-	share/po/is.po, share/po/tr.po, share/po/sr@Latn.po, share/po/az.po,
-	share/po/ta.po, share/po/ro.po, share/po/ga.po, share/po/eu.po,
-	share/po/cy.po, share/po/fa.po, share/po/tg.po, share/po/ar.po,
-	share/po/ru.po, share/po/el.po, share/po/lt.po, share/po/it.po,
-	share/po/de.po, share/po/pt.po, share/po/hr.po, share/po/uz.po,
-	share/po/ko.po, share/po/ca.po, share/po/be.po, share/po/hu.po,
-	share/po/sv.po, share/po/fr.po, share/po/bg.po, share/po/lv.po,
-	share/po/uz@Cyrl.po, share/po/sl.po, share/po/pl.po, share/po/ms.po,
-	share/po/ja.po, share/po/eo.po, share/po/nl.po, share/po/mt.po,
-	share/po/nb.po, share/po/vi.po, share/po/wa.po, share/po/sk.po,
-	share/po/DrakX.pot, share/po/fi.po, share/po/sr.po, share/po/th.po,
-	share/po/he.po, share/po/da.po, share/po/gl.po, share/po/es.po,
-	share/po/af.po, share/po/id.po: updated pot file
-
-	* install_messages.pm: paragraph about patents was not tagged as
-	translatable; added N( )
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/Makefile: Arabic and Farsi po files not used at install, as
-	there
-	isn't available font during install
-
-	* share/po/sq.po: updated Albanian file
-	updated pot file
-
-	* share/po/cs.po, share/po/uk.po: updated pot file
-	updated Czech and Ukrainian files
-
-2003/09/18  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: update naughtyServers
-
-	* share/po/Makefile, Makefile: don't remove some po's from drakxtools,
-	only from install
-	(ar/fa disabled because not working at install, ga/sl not translated
-	enough)
-
-	* install_steps.pm: sanitize ld.so.conf *before* calling ldconfig
-
-	* standalone/drakboot: ensure update_bootloader_label() won't break when
-	called in text interactive
-	(hint: in that case, $boot_label is unset)
-
-	* bootloader.pm: 
-	  - fix grub/menu.lst -> lilo.conf
-	  - cleanup
-
-	* install_steps_gtk.pm: the install package dialog box must be explictly
-	destroyed when quitting
-	installation (esp. this occurs when answering "No" to "There was an
-	error
-	installing packages")
-	rationale: the $w (created with ugtk2->new) is not reference counted
-	correctly
-	(it was already workarounded when leaving installPackages the normal
-	way)
-
-	* modules.pm: don't "probeall scsi_hostadapter usb-storage" (as requested
-	by flepied and planel)
-
-2003/09/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-15mdk
-
-	* install_steps_interactive.pm: fix slot number when configuring sound
-	cards
-
-	* harddrake/sound.pm: prevent some obscure crash at install time
-	when installing, remember the new sound driver so that the user isn't
-	confused if he ever want to configure it again
-
-2003/09/17  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: fresh updates
-
-2003/09/17  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakhelp: 
-	  - replace mdklaunchhelp by konqueror
-
-	* standalone/drakbug: 
-	  - drakhelp will load online drakbug help file
-
-2003/09/17  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* install_steps.pm: remove deprecated function call (thanks to guillaume
-	'eagle eye' Cottenceau)
-
-2003/09/17  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install2.pm: make sure use_existing_root is not set.
-
-	* install_steps.pm: moved update-menu after installation of oem-theme.rpm
-	allow exit code of detached process to be seen.
-	fixed closing of rpmdb directly in pkgs
-	install urpmi before update-menus is called.
-	fixed to close rpm db whenever possible.
-
-	* pkgs.pm: make always sure rpmdb is closed before attempting
-	installation.
-
-2003/09/17  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* lang.pm, install_steps.pm: treat C encoding specially when computing
-	utf8 flag, it should not trigger utf8 set by itself
-
-2003/09/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_TW.po: removed duplicate entry
-	Completed a translation
-	s:country:country/region:
-	updated Italian, Brazilian and Chinese files
-
-	* share/po/it.po, share/po/pt_BR.po: updated Italian, Brazilian and
-	Chinese files
-
-	* share/po/wa.po, lang.pm: Added "English (Ireland)" choice;
-	make Russian encoding compatible with Ukrainian (choosin 'ru' and 'uk'
-	languages doesn't force utf-8 but keeps koi8)
-
-	* pixmaps/langs/lang-en_IE.png: readded with binary flag
-	removed binary file
-	Added "English (Ireland)" choice;
-	make Russian encoding compatible with Ukrainian (choosin 'ru' and 'uk'
-	languages doesn't force utf-8 but keeps koi8)
-
-2003/09/17  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/interactive.pm: don't display a wait_message together with the
-	write_partitions() dialog
-
-	* fs.pm, partition_table.pm: ensure that a number is not written as the
-	type in fstab
-
-	* any.pm: add /usr/lib/qt3/lib (and sometimes /usr/lib/qt3/lib64) in
-	ld.so.conf
-	(needed for upgrade where package renaming can cause this to disappear)
-
-	* install_steps_interactive.pm: cancel in setRootPassword means "No
-	password", not cancel
-
-	* pkgs.pm: don't warn about FreeWnn being an open port (gc will try to
-	only open it to localhost)
-
-	* fsedit.pm: when the checking the mount point is not already used, don't
-	take into account current partition
-
-	* interactive/gtk.pm: fix ugliness: don't display $advanced_pack when
-	there are no @widgets_advanced
-	(esp. since $advanced_pack is now in its own scrolled window)
-
-2003/09/17  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Fixed "Configure CUPS" function of printerdrake adding
-	a second
-	"<Location />...</Location>" in /etc/cups/cupsd.conf instead of
-	replacing the existing one (fix of Titi's newly introduced bug from
-	May 19 14:17:58 2003 UTC).
-
-2003/09/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* handle_configs.pm (comment_directive) fix it
-
-	* drakxtools.spec: 9.2-14mdk
-	we still are 13mdk
-	do not log changes that got reversed between two releases
-	9.2-13mdk
-
-2003/09/17  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: force mandrake_doc-en if language is not fr, it or es
-
-2003/09/17  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: fresh updates
-
-2003/09/17  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/09/17  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps.pm: fixed to close rpm db whenever possible.
-
-2003/09/17  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_steps.pm, lang.pm: treat C encoding specially when computing
-	utf8 flag, it should not trigger utf8 set by itself
-
-2003/09/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po, share/po/nb.po, share/po/et.po, share/po/cy.po,
-	share/po/hu.po: updated Welsh, Estonian, Hungarian, Norwegian and
-	Portuguese files
-
-2003/09/17  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm: fix ugliness: don't display $advanced_pack when
-	there are no @widgets_advanced
-	(esp. since $advanced_pack is now in its own scrolled window)
-
-	* any.pm: add /usr/lib/qt3/lib (and sometimes /usr/lib/qt3/lib64) in
-	ld.so.conf
-	(needed for upgrade where package renaming can cause this to disappear)
-	run nisdomainname et ypbind so that nis is correctly set up *now*, not
-	at next reboot.
-	TODO: also do it during install since nis can be useful to resolve
-	domain names. Not done because 9.2-RC
-
-	* fsedit.pm: when the checking the mount point is not already used, don't
-	take into account current partition
-
-	* install_steps_interactive.pm: cancel in setRootPassword means "No
-	password", not cancel
-
-	* standalone/drakauth: display errors occuring in
-	any::set_authentication()
-	(esp. for "Can't use broadcast with no NIS domain")
-
-	* diskdrake/interactive.pm: don't display a wait_message together with the
-	write_partitions() dialog
-
-	* fs.pm, partition_table.pm: ensure that a number is not written as the
-	type in fstab
-
-2003/09/17  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/09/16  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps.pm: make sure / and /usr are formatted in recovery mode.
-
-2003/09/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sl.po, share/po/fa.po, share/po/sr.po, share/po/ar.po,
-	share/po/sr@Latn.po, share/po/nl.po, share/po/es.po, share/po/eo.po,
-	share/po/th.po, share/po/uz@Cyrl.po, share/po/vi.po, share/po/hu.po,
-	share/po/wa.po, share/po/eu.po, share/po/tr.po, share/po/ro.po,
-	share/po/sq.po, share/po/et.po, share/po/is.po, share/po/zh_CN.po,
-	share/po/he.po, share/po/ca.po, share/po/be.po, share/po/lt.po,
-	share/po/ja.po, share/po/ms.po, share/po/da.po, share/po/nb.po,
-	share/po/bs.po, share/po/cs.po, share/po/el.po, share/po/pt_BR.po,
-	share/po/az.po, share/po/cy.po, share/po/uz.po, share/po/hr.po,
-	share/po/ru.po, share/po/bg.po, share/po/gl.po, share/po/ko.po,
-	share/po/mt.po, share/po/zh_TW.po, share/po/uk.po, share/po/tg.po,
-	share/po/sv.po, share/po/pl.po, share/po/af.po, share/po/pt.po,
-	share/po/ta.po, share/po/fr.po, share/po/fi.po, share/po/id.po,
-	share/po/de.po, share/po/sk.po, share/po/ga.po, share/po/it.po,
-	share/po/lv.po: updated pot files
-
-2003/09/16  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: pixelization
-
-2003/09/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: fix typos
-
-	* harddrake/sound.pm: fix #5403:
-	  - make sure to use OptionMenu instead of Combo boxes
-	  - move help into a tooltip
-
-2003/09/16  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: fix firmware testing at installation
-
-2003/09/16  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps.pm: make sure / and /usr are formatted in recovery mode.
-
-2003/09/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/help-it.pot, share/po/help-de.pot, share/po/help-es.pot,
-	share/po/help-ru.pot, share/po/DrakX.pot: updated pot files
-
-2003/09/16  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* share/rpmsrate: wireless packages fix
-
-	* network/adsl.pm: fix firmware testing at installation
-
-2003/09/16  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_interactive.pm: added question to ask for recovering the
-	system in recover mode.
-
-	* install_any.pm: removing update media tag (except for update medium)
-
-	* install2.pm: made mouse, keyboard, packages selection, timezone and
-	security selection automatic...
-	/ and /usr should be formatted, keep default for installation.
-	fixed stupid typo preventing mouse modules to be loaded.
-	added automatic steps in recovery mode.
-	disable recovery mode if recovery.cfg file has not been read
-	successfully.
-
-2003/09/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/help-ru.pot, share/po/help-de.pot, share/po/DrakX.pot,
-	share/po/help-it.pot, share/po/help-es.pot: updated pot files
-
-2003/09/16  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive/gtk.pm: Gtk2::CheckButton->new is
-	Gtk2::CheckButton->new_with_mnemonic, it's better to use
-	Gtk2::CheckButton->new_with_label (bug #5728)
-
-2003/09/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* interactive/gtk.pm: fix expert mode resulting in advanced setting being
-	displayed by
-	default but label still being "advanced" instead of "basic"
-
-	* drakxtools.spec: one more fix
-	9.2-12mdk
-
-2003/09/16  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: add minichinput in X 5
-
-2003/09/15  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: initialize $adsl, fix #5674 and pppoe.conf problems
-	fix #5056 (mostly workaround as kernel is frozen)
-
-	* network/netconnect.pm: net install autodetection fix
-
-2003/09/15  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: avoid using other depth than 24 for
-	fglrx in automatic mode.
-
-	* standalone.pm: improved speed by invoking once `rpm -qa` instead of 4.
-
-2003/09/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/is.po, share/po/fr.po, share/po/fi.po: updated Finnish, French
-	and Icelandic files
-
-	* share/po/help-ru.pot, share/po/help-fr.pot, share/po/help-it.pot,
-	share/po/help-de.pot, share/po/help-es.pot: put back previous versions
-	of help-*.pot files to be in synch with help.pm
-
-2003/09/15  Pixel  <pixel at mandrakesoft.com>
-
-	* run_program.pm: better logging of killed runaway processes
-
-	* Xconfig/main.pm: configure_resolution() must return 'config_changed'
-	when a new resolution is chosen
-
-	* lang.pm: use locale_special when $::prefix is set (so that X test is
-	i18n)
-
-	* any.pm: set ICEAUTHORITY for "gnome-session-save --kill"
-	(it would be better to set it in usermode, but it works :)
-
-	* standalone/XFdrake: 
-	  - call any::ask_window_manager_to_logout() after forking so that exit
-	doesn't happen before it is done
-	(otherwise it can loose Xauth access)
-	  - fix checking config_changed (it can be string 'config_changed' or
-	the new $raw_X)
-
-	* partition_table.pm: associate partition table 0xeb (BeOS) with
-	filesystem befs (part of bug #5523)
-
-2003/09/15  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbug: New, improved, compact code, courtesy of Thierry.
-	Updates for stable release bug submission to anthill (vdanen)
-
-2003/09/15  Till Kamppeter  <till at mandrakesoft.com>
-
-	* share/rpmsrate: Added usbutils to the packages needed for installation.
-	This package
-	is needed for setting up the HP PSC 1xxx and OfficeJet 4xxx with HPOJ.
-
-	* printer/main.pm: Small fix on LIDIL workaround.
-	Put device identity info into the HPOJ config file also when HPOJ
-	configuration was not verified (LIDIL devices).
-	Added workaround to make HP PSC 1xxx and OfficeJet 4xxx really working.
-
-2003/09/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/sound.pm: fix #5488: do not overwrite current driver if it's a
-	viable driver for
-	the current sound card
-	show the current driver too (being preselected) so that users do not
-	get confused
-
-	* drakxtools.spec: typo fixes
-
-	* interactive/gtk.pm: fix hidden or cutted buttons (#1919, #2364, #2705,
-	#3667, ...)
-
-2003/09/15  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: fix #5056 (mostly workaround as kernel is frozen)
-
-2003/09/15  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/09/15  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* c/Makefile: fixed possible typo...
-
-	* standalone.pm: improved speed by invoking once `rpm -qa` instead of 4.
-
-2003/09/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* help.pm: reverted to previous version, to avoid huge strings break at
-	this stage
-
-	* share/po/pt.po, share/po/it.po, share/po/af.po, share/po/hu.po,
-	share/po/mt.po: updated Afrikaans, Hungarian, Italian, Maltese and
-	Portuguese files
-
-2003/09/15  Pixel  <pixel at mandrakesoft.com>
-
-	* lang.pm: use locale_special when $::prefix is set (so that X test is
-	i18n)
-
-	* Xconfig/main.pm: configure_resolution() must return 'config_changed'
-	when a new resolution is chosen
-
-	* run_program.pm: better logging of killed runaway processes
-
-	* diskdrake/interactive.pm: fix growing ext2/ext3 partitions
-
-	* standalone/drakupdate_fstab: fix typo (pixel sux)
-
-	* any.pm: set ICEAUTHORITY for "gnome-session-save --kill"
-	(it would be better to set it in usermode, but it works :)
-	when "Back" is pressed, restore the list of entries in bootloader (bug
-	#5680)
-
-	* standalone/XFdrake: 
-	  - call any::ask_window_manager_to_logout() after forking so that exit
-	doesn't happen before it is done
-	(otherwise it can loose Xauth access)
-	  - fix checking config_changed (it can be string 'config_changed' or
-	the new $raw_X)
-
-	* partition_table.pm: associate partition table 0xeb (BeOS) with
-	filesystem befs (part of bug #5523)
-
-2003/09/15  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakTermServ: drakTermServ -
-	translation issues (Arpad Biro), fix help text format
-	drakbackup - translation issues (Arpad Biro)
-	fix user, cron misbehavior (Keld J�rn Simonsen)
-
-2003/09/15  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Added support for user-mode-only HPOJ devices
-	(HP PSC 1xxx and
-	OfficeJet 4xxx). Fixes bug #5641.
-
-	* printer/main.pm: perl_checker fix.
-	Added support for user-mode-only HPOJ devices (HP PSC 1xxx and
-	OfficeJet 4xxx). Fixes bug #5641.
-
-2003/09/14  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: add a warning for / on LVM: "You may not be able to install
-	lilo (since lilo doesn't handle a LV on multiple PVs)"
-
-2003/09/14  Warly  <warly at mandrakesoft.com>
-
-	* standalone/service_harddrake: stop bootsplash silent mode if something
-	is detected
-
-2003/09/14  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: last updates, fixed some typos
-
-2003/09/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po, share/po/he.po, share/po/pt_BR.po, share/po/uk.po,
-	share/po/fa.po, share/po/sq.po: updated Farsi, Hebrew, Hungarian,
-	Brazilian, Albanian and Ukrainian files
-
-2003/09/14  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: add a warning for / on LVM: "You may not be able to install
-	lilo (since lilo doesn't handle a LV on multiple PVs)"
-
-2003/09/13  nplanel
-
-	* install2.pm: back to i810fb xcon=4 (bad docummented option)
-
-2003/09/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: put quotes around the XIM_PROGRAM values that use spaces
-
-	* share/po/it.po, share/po/ro.po, share/po/he.po, share/po/pt_BR.po,
-	share/po/sk.po, share/po/bg.po: updated Bulgarian, Hebrew, Italian,
-	Brazilian and Romanian files;
-	fixed syntax errors in Slovak file
-
-	* share/po/zh_CN.po, share/po/cy.po: updated Welsh and Chinese files
-
-2003/09/13  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/09/12  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/compssUsers: Always install a termunal emulator and don't install
-	GNOME by default
-
-	* standalone/icons/wiz_logdrake.png, standalone/icons/wiz_drakgw.png,
-	standalone/icons/wiz_scannerdrake.png,
-	standalone/icons/wiz_drakconnect.png,
-	standalone/icons/wiz_default_up.png, standalone/icons/wiz_firewall.png,
-	standalone/icons/wiz_printerdrake.png,
-	standalone/icons/drakfont.620x57.png: Update
-
-2003/09/12  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: 
-	  - dropped sub load_firmware_floppy
-	  - handle windows firmware's copy
-
-	* network/tools.pm: added sub copy_firmware, sub use_windows(), sub
-	use_floppy
-	firmware copy works from floppy and windows/winnt
-
-2003/09/12  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* share/rpmsrate: fixed fatal error in rpmsrate.
-
-2003/09/12  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* lang.pm: fix garbled font when asking UTF8 in text install
-
-	* c/Makefile.PL, c/stuff.xs.pl: stuff doesn't contain gtk stuff anymore
-
-	* tools/make_mdkinst_stage2: die if cp failed
-
-	* share/themes-galaxy.rc: fix progressbar color (should be blue)
-
-2003/09/12  keld
-
-	* share/po/da.po: corrections
-	gi/perl-install/share/po/da.po
-	corrections
-	soft/wizard_perl/po/da.po gi/perl-install/share/po/da.po
-	updates
-	soft/menu-messages/da.po soft/ftw/po/da.po
-	gi/perl-install/share/po/da.po
-
-2003/09/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sv.po, share/po/nb.po, share/po/vi.po: updated Norwegian,
-	Swedish and Vietnamese files
-
-	* share/po/cs.po: updated Czech file
-
-	* share/po/az.po: updated Azeri file
-
-2003/09/12  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: hd as default daemon media
-
-2003/09/12  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/09/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: fix #5586 (profiles with spaces in name)
-
-	* drakxtools.spec: 9.2-11mdk
-
-2003/09/12  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2003/09/12  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Fix gnome-audio entry
-	Update
-
-2003/09/12  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translation
-
-2003/09/12  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: removed nautilus-gtkhtml
-	added rnboifd and cm2020 packages
-
-2003/09/12  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* share/rpmsrate: fixed fatal error in rpmsrate.
-
-2003/09/12  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/themes-galaxy.rc: fix progressbar color (should be blue)
-
-2003/09/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/uz.po, share/po/nb.po, share/po/id.po, share/po/da.po,
-	share/po/tr.po, share/po/mt.po, share/po/tg.po, share/po/sr.po,
-	share/po/ru.po, share/po/sl.po, share/po/hr.po, share/po/uk.po,
-	share/po/ro.po, share/po/af.po, share/po/he.po, share/po/ms.po,
-	share/po/el.po, share/po/wa.po, share/po/uz@Cyrl.po, share/po/ta.po,
-	share/po/az.po, share/po/ja.po, share/po/de.po, share/po/lt.po,
-	share/po/cy.po, share/po/ga.po, share/po/is.po, share/po/vi.po,
-	share/po/pl.po, share/po/zh_TW.po, share/po/fr.po, share/po/sv.po,
-	share/po/nl.po, share/po/ar.po, share/po/lv.po, share/po/sq.po,
-	share/po/pt_BR.po, share/po/zh_CN.po, share/po/th.po, share/po/hu.po,
-	share/po/es.po, share/po/eo.po, share/po/sk.po, share/po/be.po,
-	share/po/ko.po, share/po/fa.po, share/po/cs.po, share/po/gl.po,
-	share/po/sr@Latn.po, share/po/pt.po, share/po/ca.po, share/po/bg.po,
-	share/po/it.po, share/po/DrakX.pot, share/po/fi.po, share/po/bs.po,
-	share/po/eu.po: updated pot file
-
-2003/09/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: fix #5586 (netprofile package still need be
-	fixed)
-
-2003/09/11  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_steps_gtk.pm: don't display a watch when slow things because due
-	to the
-	large number of gtkflush(), the ask_ok_cancel appears
-	before its Gtk->main is called, hence clicking too fast
-	will call Gtk->main_quit before Gtk->main, but the dialog
-	doesn't disappear; then on the next click on ok/cancel,
-	the call to another Gtk->main_quit will lead to two
-	Gtk->main being exited, hence destroying the ok/cancel
-	dialog but alors the main window (choose of individual
-	packages)
-
-	* ugtk2.pm: don't pack_end two times a button, this causes a Gtk Critical
-	and we never know what can happen after that :/
-
-2003/09/11  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/test.pm, ugtk2.pm: use center_always for popped windows (if
-	transient is not used), and force centering in Xconfig test
-
-	* lang.pm: move configuring kdmrc to lang::write so that it is done in
-	localedrake
-	don't configure kde config files when they are not present
-	(otherwise minimal install followed by urpmi kde gives a badly
-	configured kde)
-
-	* c/Makefile.PL: libXext seems to be needed, i don't know why...
-
-	* install_steps.pm: move configuring kdmrc to lang::write so that it is
-	done in localedrake
-
-2003/09/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* modules/interactive.pm: if some module has no parameter, instead of not
-	displaying the config
-	window, show that there's no parameters to configure
-	translate one more string
-
-	* standalone/harddrake2: fix infamous #4136
-	rationale: our own SIG_CHLD handler intercept the child death after
-	run_program's waitpid() got interrupted by the signal but before it
-	get rescheduled by the kernel (at which stage the child it wait for
-	does not exists anymore)
-
-	* standalone/drakfont: fix #5571
-
-	* share/po/fr.po: help making printerdrake icon bar be shorter (#5282
-	again)
-
-2003/09/11  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: one fix
-	typo fixes
-
-2003/09/11  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Add   5 LOCALES"zh_CN" miniChinput (#4408)
-
-2003/09/11  Florin Grad  <florin at mandrakesoft.com>
-
-	* network/shorewall.pm: add the network interface window as in the
-	drakgw's case
-
-	* standalone/drakgw: silly me, I forgot the debug messages
-	some Cancel interface fix
-
-2003/09/11  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* bootloader.pm: protected restore entry to be only visible if restore
-	option added during boot.
-
-	* install2.pm: added restore option to allow restore entry to be created
-	(refused by default)
-
-	* any.pm: fixed to use meta_class desktop instead of virtual discovery
-	(mapped to desktop).
-
-	* Xconfig/resolution_and_depth.pm: fixed depth to 24 when using driver
-	fglrx (it won't work unless 24 bits)
-
-	* install_steps.pm: simplified oem theme generation, now use oem-theme.rpm
-	wait for processes that need to be correctly finished before.
-
-	* run_program.pm: added detach option to handle detached process running
-	(for update-menus).
-
-2003/09/11  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_gtk.pm: inactivate antialias in VGA16 because it makes fonts
-	look worse
-
-	* mdk-stage1/disk.c: fix recovery behaviour thx to francois comments
-
-	* any.pm: don't use images for language choice in vga16, it's too ugly
-
-2003/09/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uz@Cyrl.po, share/po/uz.po, share/po/cy.po: updated Welsh and
-	Uzbek files
-
-	* share/po/lt.po, share/po/he.po, share/po/wa.po, share/po/ta.po,
-	share/po/tg.po, share/po/ms.po, share/po/sl.po, share/po/eo.po: updated
-	po files (country names strings merged from drakfw)
-
-	* share/po/it.po: updated Italian file
-	updated Italian file
-
-2003/09/11  Pixel  <pixel at mandrakesoft.com>
-
-	* lang.pm: move configuring kdmrc to lang::write so that it is done in
-	localedrake
-	don't configure kde config files when they are not present
-	(otherwise minimal install followed by urpmi kde gives a badly
-	configured kde)
-
-	* Xconfig/test.pm, ugtk2.pm: use center_always for popped windows (if
-	transient is not used), and force centering in Xconfig test
-
-	* install_steps.pm: move configuring kdmrc to lang::write so that it is
-	done in localedrake
-
-	* c/Makefile.PL: libXext seems to be needed, i don't know why...
-
-2003/09/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/logdrake: always display the log domain names in the same
-	order, that is in
-	english (not l10n) alphabetic order
-
-	* standalone/drakconnect: do not set hostname if there's a dynamic
-	interface
-
-	* standalone/drakperm: remove debugging assertion
-	display "the current level is X" instead of "the current level is level
-	X"
-
-2003/09/10  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated one string
-
-2003/09/10  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: 2 typo fixes
-	Updated
-
-2003/09/10  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate, share/compssUsers.desktop: Update
-
-2003/09/10  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: Don't install nautilus-gtkhtml by default
-
-2003/09/10  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install2.pm: make sure mouse modules are loaded before using them
-	(usefull for defcfg or recovery).
-	save recovery file if disk installation.
-	take recovery option into account.
-
-	* mouse.pm: fixed the fix of fpons trick...
-	fixed the fpons trick (which was false moreover)
-	added load_modules to load mouse module according to configuration.
-
-	* bootloader.pm: restore entry is a recovery entry.
-	restore entry shouldn't have reference of vga=... in append, moved to
-	vga.
-
-	* network/adsl.pm: added sagem support for dhcp (as used by Free
-	degroupped ;-))
-
-	* standalone/XFdrake, install_steps_interactive.pm: added nplanel patch
-	for ATI proprietary drivers.
-
-	* Xconfig/card.pm: fixed perl_checker fixes.
-	added nplanel patch for ATI proprietary drivers.
-
-2003/09/10  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* Xconfig/test.pm: clean
-	we don't have .jpg loader in install, file needs to be in .png
-	(mandrake_desk 9.2-8mdk)
-
-	* rescue/tree/etc/issue, mdk-stage1/Makefile: 9.2
-
-	* mdk-stage1/stage1.c, mdk-stage1/stage1.h, mdk-stage1/disk.h,
-	mdk-stage1/automatic.h, mdk-stage1/tools.c, mdk-stage1/disk.c: recovery
-
-2003/09/10  nplanel
-
-	* Xconfig/card.pm: fixup default fglrx config to be included in Device
-	Section. thanks pixel
-
-2003/09/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pl.po, share/po/et.po, share/po/pt_BR.po, share/po/nb.po,
-	share/po/az.po, share/po/cs.po, share/po/zh_CN.po, share/po/hu.po:
-	updated Azeri, Czech, Estonian, Hungarian, Brazilian and Chinese files
-
-2003/09/10  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: no more "dos" label in bootloader (it seems WinXP use the
-	"DOS FAT16" for fat partitions)
-
-2003/09/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-10mdk
-
-	* standalone/drakperm: 
-	  - do not comply on filter change (system, user or system & user)
-	  - default to "system & user" by default
-	  - show customized rules after system ones since these are managed once
-	system ones get applied
-	  - add new rules to end of list
-
-	* network/netconnect.pm: follow std explanations policy
-
-	* standalone/drakedm: follow std explanations policy
-	add higher level explanations
-
-2003/09/09  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* any.pm: 
-	  - userdrake is in /usr/sbin/ (#5447)
-
-2003/09/09  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm: profile is 'default' if no configuration file
-	found
-
-2003/09/09  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/09/09  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_messages.pm: fixed reference to 9.1 errata, (now
-	http://www.mandrakelinux.com/en/92errata.php3).
-
-	* standalone/drakautoinst: try again if no floppy (or error during
-	creation of floppy)
-
-	* bootloader.pm: avoid lilo-graphic for ProSavageDDR card as this card
-	seems to report bad window size.
-
-2003/09/09  keld
-
-	* share/po/da.po: updates
-	soft/GtkMdkWidgets/po/da.po soft/wizard_perl/po/da.po
-	gi/perl-install/share/po/da.po
-
-2003/09/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/de.po: updated German file
-	updated pot file
-
-	* share/po/help-es.pot, share/po/pt_BR.po, share/po/nb.po, share/po/eu.po,
-	share/po/ta.po, share/po/help-de.pot, share/po/it.po, share/po/ja.po,
-	share/po/uz.po, share/po/tr.po, share/po/et.po, share/po/sl.po,
-	share/po/fr.po, share/po/DrakX.pot, share/po/uk.po,
-	share/po/help-it.pot, share/po/nl.po, share/po/af.po, share/po/cs.po,
-	share/po/he.po, share/po/wa.po, share/po/bg.po, share/po/ru.po,
-	share/po/be.po, share/po/ms.po, share/po/pl.po, share/po/vi.po,
-	share/po/help-ru.pot, share/po/ga.po, share/po/cy.po, share/po/ca.po,
-	share/po/eo.po, share/po/th.po, share/po/sr.po, share/po/sk.po,
-	share/po/az.po, share/po/da.po, share/po/sq.po, share/po/ar.po,
-	share/po/mt.po, share/po/el.po, share/po/uz@Cyrl.po, share/po/tg.po,
-	share/po/hr.po, share/po/sv.po, share/po/pt.po, share/po/lt.po,
-	share/po/gl.po, share/po/fa.po, share/po/es.po, share/po/zh_TW.po,
-	share/po/fi.po, share/po/zh_CN.po, share/po/lv.po, share/po/ko.po,
-	share/po/bs.po, share/po/sr@Latn.po, share/po/ro.po, share/po/id.po,
-	share/po/is.po, share/po/hu.po: updated pot file
-
-2003/09/09  Pixel  <pixel at mandrakesoft.com>
-
-	* mouse.pm: write "MOVE YOUR WHEEL!" only for ps2 mice
-
-	* ugtk2.pm: remove too verbose _XSetInputFocus log
-
-	* modules.pm: increase sleep time after modprobing usb-uhci/usb-ohci
-	(otherwise USB mouse may be undetected)
-
-	* standalone/drakupdate_fstab: re-enable supermount
-
-	* standalone/diskdrake, any.pm: ensure userdrake works when diskdrake
-	--fileshare is embedded or run through kdesu
-
-	* install_steps_interactive.pm: don't ask security level when upgrading
-
-	* share/po/help-es.pot, share/po/help-fr.pot, share/po/help-de.pot,
-	share/po/help-ru.pot, help.pm, share/po/help-it.pot: update from xml
-	help
-
-2003/09/09  Till Kamppeter  <till at mandrakesoft.com>
-
-	* scanner.pm: Fixed functions for scanner database (ScannerDB) generation.
-
-	* printer/printerdrake.pm: Fixed bug #5423: Some option settings were not
-	be recognized or changed.
-
-2003/09/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/logdrake: fix #5448 (infinite entries)
-
-	* standalone/drakxtv: install xawtv if needed
-
-	* standalone/drakconnect: fix window size in when non embedded & non
-	wizard
-
-	* share/po/fr.po: fix drakboot layout
-
-	* interactive/gtk.pm: fix #5040 (too small drakboot's window width)
-
-	* standalone/drakboot: fix default size without draksplash
-
-2003/09/09  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/ta.po, share/po/ko.po, share/po/fi.po, share/po/sq.po: Fix
-	s/9.1/9.2
-
-2003/09/09  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/printerdrake: 
-	  - help call
-	  - reportbug via bugzilla
-
-2003/09/09  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_messages.pm: fixed reference to 9.1 errata, (now
-	http://www.mandrakelinux.com/en/92errata.php3).
-
-	* standalone/drakautoinst: try again if no floppy (or error during
-	creation of floppy)
-
-2003/09/09  keld
-
-	* share/po/da.po: updates
-	soft/GtkMdkWidgets/po/da.po soft/wizard_perl/po/da.po
-	gi/perl-install/share/po/da.po
-
-2003/09/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po, share/po/uk.po, share/po/eu.po: updated Basque,
-	Portuguese and Ukrainian files
-
-2003/09/09  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: don't ask security level when upgrading
-
-	* mouse.pm: write "MOVE YOUR WHEEL!" only for ps2 mice
-
-	* modules.pm: increase sleep time after modprobing usb-uhci/usb-ohci
-	(otherwise USB mouse may be undetected)
-
-	* share/po/help-it.pot, share/po/help-de.pot, share/po/help-fr.pot,
-	help.pm, share/po/help-ru.pot, share/po/help-es.pot: update from xml
-	help
-
-2003/09/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakfloppy: fix #5430: do not confuse users with debug
-	messages
-
-	* install_steps.pm: fix network install
-
-	* standalone/drakboot: fix default size without draksplash
-
-2003/09/09  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2003/09/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po, share/po/eu.po, share/po/uk.po: updated Basque,
-	Portuguese and Ukrainian files
-
-2003/09/09  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* install_steps.pm: fix network install
-
-	* standalone/drakfloppy: fix #5430: do not confuse users with debug
-	messages
-
-2003/09/08  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: last updates
-
-2003/09/08  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/sq.po, share/po/vi.po, share/po/gl.po, share/po/ro.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/ta.po, share/po/it.po,
-	share/po/ru.po, share/po/de.po, share/po/zh_CN.po, share/po/ja.po,
-	share/po/ms.po, share/po/ko.po, share/po/tr.po, share/po/lv.po,
-	share/po/ca.po, share/po/ga.po, share/po/el.po, share/po/he.po,
-	share/po/da.po, share/po/uz.po, share/po/af.po, share/po/nb.po,
-	share/po/hr.po, share/po/be.po, share/po/uz@Cyrl.po, share/po/fi.po,
-	share/po/es.po, share/po/id.po, share/po/et.po, share/po/eo.po,
-	share/po/sl.po, share/po/pt_BR.po, share/po/bg.po, share/po/fr.po,
-	share/po/mt.po, share/po/nl.po, share/po/uk.po, share/po/tg.po,
-	share/po/lt.po, share/po/th.po, share/po/pl.po, share/po/hu.po,
-	share/po/sr.po, share/po/sk.po, share/po/pt.po, share/po/fa.po,
-	share/po/az.po, share/po/cs.po, share/po/bs.po, share/po/is.po,
-	share/po/eu.po, share/po/zh_TW.po, share/po/sr@Latn.po, share/po/wa.po,
-	share/po/cy.po, share/po/ar.po: s/9\.1/9\.2/g
-
-	* share/advertising/06-development.pl, share/advertising/01-thanks.pl,
-	share/advertising/04-configuration.pl: Update
-
-2003/09/08  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - do not call anymore network::netconnect::save_conf
-	  - good set_profiles($netcnx) call
-	shrink
-
-	* network/nfs.pm, network/isdn.pm, network/adsl.pm, network/network.pm: 
-	  - fix/use explanations
-	  - fix #5307 (firmware)
-
-	* network/netconnect.pm: 
-	  - do not call anymore network::netconnect::save_conf
-	  - good set_profiles($netcnx) call
-	  - fix/use explanations
-	  - fix #5307 (firmware)
-
-2003/09/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fi.po, share/po/et.po, share/po/az.po, share/po/zh_CN.po:
-	updated Azeri, Estonian, Finnish and Chinese files
-
-	* share/po/hu.po, share/po/eu.po: updated Basque and Hungarian files
-
-	* share/po/nb.po, share/po/cy.po: updated Welsh and Norwegian files
-
-2003/09/08  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: don't warnAboutNaughtyServers when
-	upgrading
-
-	* standalone/diskdrake: remove obsolete code
-	~fix~ calling userdrake in "diskdrake --fileshare"
-
-	* any.pm: perl_checker compliance
-	~fix~ calling userdrake in "diskdrake --fileshare"
-
-	* standalone/XFdrake: Xdrakres is "XFdrake resolution" not simply
-	"XFdrake"
-
-	* Xconfig/resolution_and_depth.pm: 
-	  - use OptionMenu's instead of Combo's (better looking and mcc doesn't
-	like embedding combos)
-	  - cleanup
-
-2003/09/08  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/printerdrake: Fixed copyright notice.
-
-2003/09/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: fix current profile load in wizard mode
-	increase drakconnect robustness regarding profiles managment
-	  - fix set_profiles() call on profiles menu user change
-	  - (set_profiles) consolidate netcnx->{PROFILE} setting where we call
-	  set_profile
-	
-	  - (update_profiles) rely on netcnx->{PROFILE}
-	
-	  - fix profiles list update when wizard exits
-
-	* standalone/drakperm, standalone/draksec: add help buttons
-
-	* network/netconnect.pm: save_conf() really is dead
-
-	* drakxtools.spec: last 9.2-9mdk bits
-	fix net_monitor not working as root
-	9.2-9mdk
-
-	* ugtk.pm, my_gtk.pm: no more used (drakcronat just removed from distro)
-	=> less dependancies :-)
-
-	* standalone/drakfont: fix #4964 (not being able to select directories)
-
-2003/09/08  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: last updates
-
-2003/09/08  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/printerdrake: 
-	  - support new help call
-
-2003/09/08  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: shrink
-
-	* network/network.pm, network/adsl.pm, network/isdn.pm,
-	network/netconnect.pm, network/nfs.pm: 
-	  - fix/use explanations
-	  - fix #5307 (firmware)
-
-	* share/po/fr.po: s/Utiliserer une disquette/Utiliser une disquette/
-
-2003/09/08  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/09/08  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install2.pm: set xcon=6 when loading i810fb module (to have console 7
-	with X).
-
-2003/09/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uz.po, share/po/ru.po, share/po/lv.po, share/po/lt.po,
-	share/po/ga.po, share/po/sr@Latn.po, share/po/ar.po, share/po/hu.po,
-	share/po/bg.po, share/po/zh_TW.po, share/po/sl.po, share/po/mt.po,
-	share/po/gl.po, share/po/DrakX.pot, share/po/cy.po, share/po/sv.po,
-	share/po/uk.po, share/po/tg.po, share/po/id.po, share/po/hr.po,
-	share/po/ms.po, share/po/nl.po, share/po/de.po, share/po/uz@Cyrl.po,
-	share/po/is.po, share/po/fr.po, share/po/ja.po, share/po/sk.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/it.po,
-	share/po/tr.po, share/po/sr.po, share/po/nb.po, share/po/be.po,
-	share/po/fa.po, share/po/eu.po, share/po/da.po, share/po/ko.po,
-	share/po/af.po, share/po/es.po, share/po/ro.po, share/po/pl.po,
-	share/po/vi.po, share/po/bs.po, share/po/wa.po, share/po/sq.po,
-	share/po/he.po, share/po/ta.po, share/po/pt.po, share/po/ca.po,
-	share/po/th.po, share/po/pt_BR.po: updated pot file
-
-	* share/po/az.po, share/po/zh_CN.po, share/po/et.po, share/po/fi.po:
-	updated Azeri, Estonian, Finnish and Chinese files
-	updated pot file
-
-2003/09/08  Pixel  <pixel at mandrakesoft.com>
-
-	* tools/aewm-drakx/aewm-drakx.c, install_steps_gtk.pm,
-	tools/aewm-drakx/client.c, tools/Makefile, tools/aewm-drakx/aewm.h,
-	tools/aewm-drakx/README, tools/aewm-drakx/misc.c, Makefile.config,
-	ugtk2.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/events.c: fixing
-	keyboard focus during install:
-	  - removed aewm-drakx which doesn't work nicely
-	  - fix @interactive::objects handling
-	(don't push non pop_it windows, ensure destroyed windows are removed)
-	  - ensure XSetInputFocus is called on $::WizardWindow
-
-	* Xconfig/resolution_and_depth.pm: 
-	  - use OptionMenu's instead of Combo's (better looking and mcc doesn't
-	like embedding combos)
-	  - cleanup
-
-	* any.pm: ~fix~ calling userdrake in "diskdrake --fileshare"
-
-	* standalone/XFdrake: Xdrakres is "XFdrake resolution" not simply
-	"XFdrake"
-
-	* fsedit.pm: fix check_mntpoint to get back error "There is already a
-	partition with mount point %s\n"
-
-	* install_steps_interactive.pm: don't warnAboutNaughtyServers when
-	upgrading
-
-	* standalone/diskdrake: remove obsolete code
-	~fix~ calling userdrake in "diskdrake --fileshare"
-	use formatError to have the error message instead of SCALAR(0x....)
-
-2003/09/08  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/printerdrake: Fixed copyright notice.
-	  - Use a field in the $printer data structure and no a global variable
-	for the expert mode.
-	  - Fixed bug of database not being re-read when switching between
-	  normal and expert mode with the new GTK2 main window.
-
-	* standalone/scannerdrake: Show an error message if saned could not be
-	installed.
-
-	* printer/printerdrake.pm, printer/main.pm, printer/cups.pm: 
-	  - Use a field in the $printer data structure and no a global variable
-	for the expert mode.
-	  - Fixed bug of database not being re-read when switching between
-	  normal and expert mode with the new GTK2 main window.
-
-2003/09/08  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-9mdk
-
-	* standalone/drakfont: fix #4964 (not being able to select directories)
-
-	* ugtk.pm, my_gtk.pm: no more used (drakcronat just removed from distro)
-	=> less dependancies :-)
-
-2003/09/07  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: typo fix
-
-2003/09/07  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect, network/netconnect.pm: 
-	  - $netcnx->{PROFILE} is current profile name (now scalar)
-	  - fix non working profiles loading/saving
-	  - perl_checker
-
-2003/09/07  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Fixed first-time dialog.
-
-2003/09/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-8mdk
-
-	* share/po/br.po: update
-
-2003/09/06  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Update
-
-2003/09/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po, share/po/vi.po, share/po/bs.po, share/po/he.po,
-	share/po/cy.po: updated Bosnian, Welsh, Hebrew, Hungarian and Vietnamese
-	files
-
-2003/09/05  David Baudens  <baudens at mandrakesoft.com>
-
-	* pixmaps/monitor-640.png, pixmaps/monitor-2048.png,
-	pixmaps/monitor-1920.png, pixmaps/monitor-1600.png,
-	pixmaps/monitor-800.png, pixmaps/monitor-1280.png,
-	pixmaps/monitor-1400.png, pixmaps/monitor.png, pixmaps/monitor-1152.png,
-	pixmaps/monitor-1024.png: Update
-
-2003/09/05  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/network.pm: workaround messed up ppp0 configration
-
-2003/09/05  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/09/05  Florin Grad  <florin at mandrakesoft.com>
-
-	* network/network.pm, network/netconnect.pm: small fixes for drakgw and
-	drakfirewall
-
-2003/09/05  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* lang.pm: add support for "variants" as explained by pablo (in uz@Cyrl
-	the @Cyrl is a variant)
-
-	* keyboard.pm: /me sux
-	apply patch asked by pablo so that users are not confused during
-	install that their chosen grp_toggle is not usable. yes it's too
-	late for additional translations but it's not very important that
-	this is untranslated, it's better to have it in.
-
-2003/09/05  keld
-
-	* share/po/da.po: updates
-	soft/control-center/po/da.po gi/perl-install/share/po/da.po
-
-2003/09/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/pt.po: updated Portuguese file
-
-	* lang.pm: increazed size of Arabic font in KDE
-
-	* share/po/uz.po, share/po/ru.po, share/po/zh_CN.po, share/po/uz@Cyrl.po,
-	share/po/sk.po, share/po/cs.po: updated Czech, Slovak, Uzbek and Chinese
-	files
-
-	* share/po/hu.po, share/po/nb.po, share/po/fa.po: updated pot files
-
-2003/09/05  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Change the strings again for Pablo
-
-2003/09/05  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/printerdrake: Reverted button texts to not break existing
-	translations, added hints
-	for translators to make the button texts short.
-	Shorter button texts, so that translations do not let the buttons go
-	out of the window.
-
-2003/09/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update fr translation
-	help making printerdrake icon bar be shorter (#5282)
-
-2003/09/04  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: passed spellchecking, fixed some typos
-	last updates
-
-2003/09/04  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Fully updated
-
-2003/09/04  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/compssUsers.desktop: Update
-
-2003/09/04  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/modem.pm: always ask for modem device even if not detected,
-	unless user has winmodem
-	fix #5242, don't go back to main menu if winmodem isn't found
-
-2003/09/04  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: XF 3.3 should use depth 16 if
-	use_UTAH_GLX, this has been glitched in XF4 mode
-	(so never available).
-
-2003/09/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/sq.po: updated Estonian and Albanian files
-	updated pot file
-
-	* share/po/uz.po, share/po/ru.po, share/po/lv.po, share/po/lt.po,
-	share/po/az.po, share/po/zh_CN.po, share/po/ga.po, share/po/sr@Latn.po,
-	share/po/ar.po, share/po/hu.po, share/po/bg.po, share/po/zh_TW.po,
-	share/po/sl.po, share/po/mt.po, share/po/gl.po, share/po/DrakX.pot,
-	share/po/cy.po, share/po/sv.po, share/po/uk.po, share/po/tg.po,
-	share/po/id.po, share/po/hr.po, share/po/ms.po, share/po/nl.po,
-	share/po/de.po, share/po/uz@Cyrl.po, share/po/is.po, share/po/fr.po,
-	share/po/ja.po, share/po/sk.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/tr.po, share/po/sr.po, share/po/be.po,
-	share/po/fa.po, share/po/da.po, share/po/ko.po, share/po/af.po,
-	share/po/es.po, share/po/ro.po, share/po/pl.po, share/po/vi.po,
-	share/po/bs.po, share/po/wa.po, share/po/he.po, share/po/ta.po,
-	share/po/ca.po, share/po/fi.po, share/po/th.po, share/po/pt_BR.po:
-	updated pot file
-
-	* share/po/eu.po: updated pot file
-	updated Basque file
-
-	* share/po/nb.po: updated Norwegian file
-	updated pot file
-
-	* share/po/it.po: updated pot file
-	updated Italian file
-
-	* share/po/pt.po: updated pot file
-	updated Portuguese file
-
-2003/09/04  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/icons/drakbackup.540x57.png,
-	standalone/icons/drakTS.620x57.png: No longer needed with reworked
-	banners.
-
-	* standalone/drakTermServ: Add application title in banner.
-
-	* standalone/drakbackup: CDROM -> CDR
-
-2003/09/04  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/scannerdrake: Abort scannerdrake when SANE packages cannot be
-	installed.
-
-2003/09/04  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/09/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 
-	  - printerdrake needs foomatic-db-engine
-	  - printerdrake is moved to drakxtools since it does not anymore run on
-	  the console
-	remove doble entry
-	9.2-7mdk (arghh, 9.2-6mdk was really uploaded)
-	9.2-6mdk last bits
-	fix buildrequires for 64bit ports
-
-2003/09/03  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/rpmsrate: Update
-	Update
-	Update
-
-2003/09/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/nl.po, share/po/nb.po: updated Norwegian and Dutch files
-
-2003/09/03  Pixel  <pixel at mandrakesoft.com>
-
-	* pixmaps/mouse_3b+_middle.png, pixmaps/mouse_2b.png, mouse.pm,
-	pixmaps/mouse_right.xpm, pixmaps/mouse_3b.xpm,
-	pixmaps/mouse_2b_left.png, pixmaps/mouse_3b.png,
-	pixmaps/mouse_3b_middle.png, pixmaps/mouse_middle.xpm,
-	pixmaps/mouse_3b_left.png, pixmaps/arrow_up.png,
-	pixmaps/mouse_3b_mini.xpm, pixmaps/arrow_down.xpm,
-	pixmaps/mouse_2b_right.png, pixmaps/mouse_3b+_mini.xpm,
-	pixmaps/mouse_3b+.png, pixmaps/mouse_3b_right.png,
-	pixmaps/mouse_3b+.xpm, pixmaps/arrow_down.png, pixmaps/mouse_left.xpm,
-	pixmaps/arrow_up.xpm: 
-	  - much cleanup in test_mouse()
-	  - new images for mouse test (thanks to Jerome Villette)
-
-	* install_steps_newt.pm, install_steps_interactive.pm, install_steps.pm,
-	install_steps_stdio.pm, install_steps_auto_install.pm: 
-	  - move call to ->charsetChanged from install_steps_interactive to
-	install_steps
-	so that we can use it in install_steps_auto_install_non_interactive
-	  - don't overload ->selectLanguage to call lang::load_console_font(),
-	overload ->charsetChanged instead
-
-	* diskdrake/hd_gtk.pm, diskdrake/interactive.pm: require resize_fat::main
-	when needed (fix bug #5204)
-
-2003/09/03  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Default to all users for wizard->Users (as root).
-	Only allow 1 media select from wizard.
-	Limit possible user list to self for nonroot users.
-
-2003/09/03  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakhelp: 
-	  - change to handle documentaion system other than drakxtools one (for
-	instance MandrakeGalaxy)
-
-2003/09/03  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* standalone/drakautoinst: fixed missing import of ugtk2
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: created simple image
-	from 9.2 install isolinux pictures for floppy.
-
-2003/09/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: use command line parameter to specify traditional or simplified
-	style
-	for Chinput
-
-2003/09/03  Pixel  <pixel at mandrakesoft.com>
-
-	* pixmaps/mouse_3b_middle.png, pixmaps/mouse_3b_left.png,
-	pixmaps/mouse_3b.xpm, pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_left.xpm,
-	pixmaps/mouse_3b+.png, pixmaps/mouse_3b+_middle.png,
-	pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.png,
-	pixmaps/mouse_2b_right.png, pixmaps/arrow_down.xpm,
-	pixmaps/arrow_up.xpm, pixmaps/mouse_2b_left.png,
-	pixmaps/mouse_right.xpm, pixmaps/mouse_3b+_mini.xpm,
-	pixmaps/mouse_3b+.xpm, pixmaps/arrow_up.png, pixmaps/mouse_2b.png,
-	pixmaps/arrow_down.png, pixmaps/mouse_3b_right.png, mouse.pm: 
-	  - much cleanup in test_mouse()
-	  - new images for mouse test (thanks to Jerome Villette)
-
-	* install_steps_interactive.pm, install_steps_stdio.pm,
-	install_steps_auto_install.pm, install_steps_newt.pm, install_steps.pm: 
-	  - move call to ->charsetChanged from install_steps_interactive to
-	install_steps
-	so that we can use it in install_steps_auto_install_non_interactive
-	  - don't overload ->selectLanguage to call lang::load_console_font(),
-	overload ->charsetChanged instead
-
-	* diskdrake/hd_gtk.pm, diskdrake/interactive.pm: require resize_fat::main
-	when needed (fix bug #5204)
-
-2003/09/03  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Last untranslated string.  Rework banner with
-	title ala rpmdrake.
-	Fix some untranslated strings - Arpad Biro
-
-2003/09/02  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: fixed some errors in license message
-
-2003/09/02  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/09/02  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_gtk.pm: fixed duplicate entries in src architecture.
-
-	* pkgs.pm: fixed XFree86-75dpi-fonts not available (seems like a problem
-	with length of
-	rpmsrate computation, strange as it fails now and not before).
-
-2003/09/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque and Farsi files
-	updated po files
-
-	* share/po/fa.po: updated Basque and Farsi files
-
-	* share/po/hu.po: updated po files
-
-	* share/fonts.tar.bz2: updated 12x13 bitmap font (replaced hebrew glyphs
-	with a copy from
-	nachlieli font, under gpl)
-
-	* share/po/fi.po, share/po/pt.po: Updated Finnish and Portuguese files
-
-2003/09/02  Pixel  <pixel at mandrakesoft.com>
-
-	* lang.pm: do not disable arabic completly (tis very ugly to do this,
-	better remove the
-	arabic choice!)
-
-	* fs.pm: add description for option "umask=0" (bug #4310)
-
-	* share/po/Makefile: do not translate in arabic during install since
-	there's no font available
-
-2003/09/02  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Fixed major number of libsane-hpoj.
-
-	* standalone/printerdrake: Prevent main window crash when queue list gets
-	empty by deleting all
-	print queues.
-
-2003/09/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: update french translation
-
-	* share/po/br.po: update
-
-2003/09/01  gbeauchesne
-
-	* drakxtools.spec: Fix lsnsetdrake on AMD64
-
-2003/09/01  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: _ask_file: don't forget to overwrite $o->{window} as well or
-	else
-	it will be ->show'ed as a blank window (#5083)
-
-2003/09/01  keld
-
-	* share/po/da.po: Update
-	soft/urpmi/po/da.po gi/perl-install/share/po/da.po
-
-2003/09/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/ru.po, share/po/de.po, share/po/vi.po,
-	share/po/sk.po, share/po/sq.po, share/po/az.po, share/po/da.po,
-	share/po/uk.po: updated Azeri, Albanian, Ucrainian, Vietnamese and
-	Chinese files
-
-	* share/po/pt.po: updated Portuguese file
-
-	* share/po/uz@Cyrl.po, share/po/uz.po, share/po/cs.po: updated Czech and
-	Uzbek files
-
-	* share/po/bs.po, share/po/nb.po: updated Bosnian and Nrowegian files
-
-	* share/po/he.po: updated Hebrew file
-
-2003/09/01  Pixel  <pixel at mandrakesoft.com>
-
-	* pkgs.pm: oops, really kill gconfd silently
-	don't warn when killing /usr/lib/gconfd-2 when runs in background
-
-	* tools/ntp_servers.pl: update to new timezone.pm and adapt to new web
-	page listing ntp servers
-
-	* timezone.pm: update stratum 2 ntp servers
-
-	* install_steps.pm, any.pm: chksession gives GNOME for gnome, not Gnome
-
-2003/09/01  siegel
-
-	* share/po/de.po: updates german translation
-
-2003/09/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/printerdrake: do not explicitely reject embedding there, it
-	has to be done in mcc.
-	else, mcc wait forever for rpmdrake to embed in, then display an error
-	dialog explaining that rpmdrake has failled (since it exited before
-	displaying anything in mcc...)
-
-2003/08/31  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: don't check ext3 filesystems nor mount them as ext2 during
-	upgrade (bug #5067)
-
-2003/08/31  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/08/31  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakedm: in non expert mode, only display the list of
-	*installed* display managers.
-	(interface team request)
-	if no dm is installed, then switch back to expert mode behaviour and
-	display
-	all dm and install them if needed.
-	explanations now work again thanks to pixel, no need to duplicate them
-
-	* share/po/fr.po: fix draksec french translation
-
-	* standalone/drakfloppy: fix dialogs height: replace"small" option by
-	"height" & "weight" ones
-	rationale: make thecommon path be the easiest one to set up (and make
-	the
-	uncommon path be the hardest one to follow)
-
-	* standalone/harddrake2: harddrake2 help dialog: use the new scrolled
-	dialog API for scrolled labels
-	fix dialogs height: replace"small" option by "height" & "weight" ones
-	rationale: make thecommon path be the easiest one to set up (and make
-	the
-	uncommon path be the hardest one to follow)
-
-	* drakxtools.spec: 9.2-6mdk
-	conflicts with older drakxtools doc due to new ctxhelp (drakhelp being
-	broken
-	until ctxhelp module is splited out as perl-MDK-Doc)
-	requires perl-Gtk2 >= 0.95-6mdk for working XSetInputFocus()
-	since we renewed network profiles feature, we shall require netprofile
-	for
-	drakconnect
-
-	* ugtk2.pm (create_dialog) do not scroll labels by default
-	fix dialogs height: replace"small" option by "height" & "weight" ones
-	rationale: make thecommon path be the easiest one to set up (and make
-	the
-	uncommon path be the hardest one to follow)
-
-	* standalone/drakconnect: fix profiles list refreshing
-	fix dialogs height: replace"small" option by "height" & "weight" ones
-	rationale: make thecommon path be the easiest one to set up (and make
-	the
-	uncommon path be the hardest one to follow)
-
-2003/08/30  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: current updates
-
-2003/08/30  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2003/08/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/pt.po: updated Estonian and Portuguese files
-
-	* share/po/hu.po: updated Hungarian file
-
-2003/08/30  Pixel  <pixel at mandrakesoft.com>
-
-	* Makefile: since XFree86-VGA16-3.3.6-29mdk is bad, insist on having
-	XFree86-VGA16 28mdk instead
-
-2003/08/30  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/icons/wiz_printerdrake.png: Updated head image for
-	add-printer wizard to have the new printerdrake icon.
-
-	* pixmaps/printer_del.png, pixmaps/printer_conf.png,
-	pixmaps/slpash-drakeprint-2.png, pixmaps/about.png,
-	pixmaps/unselected.png, pixmaps/cups_config.png,
-	pixmaps/printer_add.png, pixmaps/selected.png, pixmaps/refresh.png,
-	pixmaps/redhat-config-users.png, pixmaps/printerdrake.png,
-	pixmaps/printer_default.png, pixmaps/help.png: Re-uploaded binary files
-	added with "cvs add -kb ...".
-	Binary files uploaded without "cvs add -kb ...", removed for re-upload.
-
-2003/08/29  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: set {perImageAppend} to the append= line from the default
-	entry or the first image= entry
-
-	* ugtk2.pm: set_minmax_width was commented which caused the individual
-	package selection
-	tree to be to large (fix bug #4548 #4865)
-
-2003/08/30  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2003/08/30  Pixel  <pixel at mandrakesoft.com>
-
-	* Makefile: since XFree86-VGA16-3.3.6-29mdk is bad, insist on having
-	XFree86-VGA16 28mdk instead
-
-2003/08/30  Till Kamppeter  <till at mandrakesoft.com>
-
-	* standalone/icons/wiz_printerdrake.png: Updated head image for
-	add-printer wizard to have the new printerdrake icon.
-
-2003/08/29  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: remove system("cp..."); (I suck so much...)
-
-2003/08/29  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* pkgs.pm: try to make sure additional CD are taken into account if low
-	memory available
-	for configuring urpmi.
-
-2003/08/29  gbeauchesne
-
-	* modules.pm: no imm/ppa on ia64
-
-2003/08/29  keld
-
-	* share/po/da.po: Updates
-	soft/menu-messages/da.po soft/GtkMdkWidgets/po/da.po
-	soft/urpmi/po/da.po soft/wizard_perl/po/da.po
-	gi/perl-install/share/po/da.po
-
-2003/08/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ko.po, share/po/sl.po, share/po/vi.po, share/po/mt.po,
-	share/po/af.po, share/po/tr.po, share/po/sk.po, share/po/ja.po,
-	share/po/hr.po, share/po/ga.po, share/po/nl.po, share/po/nb.po,
-	share/po/he.po, share/po/az.po, share/po/fa.po, share/po/cy.po,
-	share/po/et.po, share/po/lv.po, share/po/uz@Cyrl.po, share/po/lt.po,
-	share/po/sv.po, share/po/zh_TW.po, share/po/eu.po, share/po/wa.po,
-	share/po/bs.po, share/po/sr@Latn.po, share/po/de.po, share/po/is.po,
-	share/po/ro.po, share/po/ru.po, share/po/bg.po, share/po/pl.po,
-	share/po/ms.po, share/po/eo.po, share/po/tg.po, share/po/ta.po,
-	share/po/id.po, share/po/sq.po, share/po/da.po, share/po/ca.po,
-	share/po/gl.po, share/po/uz.po, share/po/el.po, share/po/fi.po,
-	share/po/it.po, share/po/th.po, share/po/ar.po, share/po/es.po,
-	share/po/be.po, share/po/DrakX.pot, share/po/fr.po, share/po/sr.po,
-	share/po/pt.po, share/po/pt_BR.po, share/po/hu.po: updated pot file
-
-	* share/po/uk.po, share/po/cs.po, share/po/zh_CN.po: updated pot file
-	updated Czech, Ukrainian and Chinese files
-
-2003/08/29  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: set {perImageAppend} to the append= line from the default
-	entry or the first image= entry
-
-	* ugtk2.pm: set_minmax_width was commented which caused the individual
-	package selection
-	tree to be to large (fix bug #4548 #4865)
-
-2003/08/29  Till Kamppeter  <till at mandrakesoft.com>
-
-	* pixmaps/unselected.png, pixmaps/printer_conf.png,
-	pixmaps/cups_config.png, pixmaps/printer_del.png,
-	pixmaps/printer_add.png, pixmaps/refresh.png, pixmaps/printerdrake.png,
-	pixmaps/selected.png, standalone/printerdrake,
-	pixmaps/printer_default.png, pixmaps/redhat-config-users.png,
-	pixmaps/help.png, pixmaps/slpash-drakeprint-2.png, pixmaps/about.png:
-	New GTK2-based main window for printerdrake (only after installation).
-
-	* printer/printerdrake.pm: Do not show hidden options in the options
-	dialog.
-	Enabled Wizards in embedded mode. They work there now!
-
-2003/08/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: restore profiles feature through new netprofile
-	package
-
-	* ctxhelp.pm: provided by mandrake_doc-drakxtools-LL
-
-	* drakxtools.spec: 9.2-5mdk
-
-	* standalone/drakconnect: restore profiles feature
-	fix title when not embedded (print right number of network interfaces
-	instead of displaying a big random number)
-
-	* share/po/fr.po: translation just means translation, not gratuitously
-	speaking about
-	the whole universe
-
-2003/08/29  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: major cleaning
-
-2003/08/28  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Partially updated
-	Updated
-
-2003/08/28  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/28  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: removed drakprofile
-
-	* share/compssUsers, share/compssUsers.desktop: select Documentation for
-	all classes
-
-2003/08/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-
-2003/08/28  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm: don't install autologin if using KDE or Gnome desktop
-	(not needed nor used)
-
-	* any.pm: 
-	  - configure /etc/sysconfig/autologin in case of xdm, but remove it if
-	kde/gnome
-	  - create any::sessions()
-	if there is only one users and meta_class is discovery, choose autologin
-	without asking
-
-2003/08/28  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Moved some stuff from mainwindow_interactive()
-	to main() and init() as
-	it has nothing to do with the main window.
-
-2003/08/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: fix dialogs heigh
-
-	* ugtk2.pm (create_dialog) enable to pass an already created Gtk2::Label
-
-2003/08/28  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* ctxhelp.pm: 
-	  - put ctxhelp modules to prevent broken drakx build
-
-2003/08/28  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: fix #4372
-
-2003/08/28  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/compssUsers.desktop, share/compssUsers: select Documentation for
-	all classes
-
-	* share/rpmsrate: removed drakprofile
-	removed linuxconf and gnome-network
-
-2003/08/28  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* share/compssUsers: make selected=all by default (so that RC1 (in
-	meta_class=download will see them)
-
-2003/08/28  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* detect_devices.pm: detect a laptop if cpu name contains "mobile" as many
-	recent laptops are in that case (in case other means would fail)
-
-2003/08/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uz.po, share/po/uz@Cyrl.po: updated Uzbek files
-
-	* share/po/fi.po: updated Finnish file
-
-	* share/po/et.po: updated Estonian file
-
-2003/08/28  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone.pm: fix MDK::Common::* explainations
-
-	* install_steps.pm: don't install autologin if using KDE or Gnome desktop
-	(not needed nor used)
-
-	* any.pm: 
-	  - configure /etc/sysconfig/autologin in case of xdm, but remove it if
-	kde/gnome
-	  - create any::sessions()
-	if there is only one users and meta_class is discovery, choose autologin
-	without asking
-
-2003/08/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone.pm (output) remove buggy warn
-
-	* install_gtk.pm: fix direction setting for bidi (need perl-Gtk2-0.95-5mdk
-	though)
-
-	* ugtk2.pm (create_dialog) enable to pass an already created Gtk2::Label
-
-2003/08/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-	* share/po/he.po: updated Hebrew file
-
-2003/08/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* any.pm, printer/cups.pm: fix pot regeneration at package build time
-
-	* drakxtools.spec: 9.2-4mdk
-
-2003/08/27  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2003/08/27  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/diskdrake: 
-	  - new drakhelp call schema
-
-	* standalone/drakhelp: 
-	  - perl-checker
-	  - New drakhelp to increase accuracy in help system
-	  - contextual help
-
-	* standalone/drakconnect, standalone/harddrake2, standalone/drakbackup: 
-	  - new drakhelp args
-
-	* standalone/drakbug: 
-	  - help connects to qa.mandrakesoft.com
-
-2003/08/27  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakboot: typo fix
-
-	* network/adsl.pm: fix firmware name (shame on me)
-	fix #4363 (titi's so beautiful)
-
-2003/08/27  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/27  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_interactive.pm: scandisk is not enough! you can destroy your
-	windows XP if you
-	don't use chkdsk and then ntfsresize is used on a buggy partition
-	(drakx should detect it via ntfsresize though), running chkdsk is
-	*mandatory*
-
-2003/08/27  nplanel
-
-	* any.pm: Now acpi=ht to prevent HT detection only
-
-	* install_steps.pm: fixup last hack
-	Now acpi=ht to prevent HT detection only
-
-2003/08/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-	updated pot file
-
-	* share/po/nl.po: updated po file
-	updated pot file
-
-	* share/po/he.po: updated Hebrew file
-	updated pot file
-
-	* share/po/sr@Latn.po, share/po/sk.po, share/po/eo.po, share/po/bg.po,
-	share/po/zh_TW.po, share/po/sv.po, share/po/sr.po, share/po/ta.po,
-	share/po/sl.po, share/po/lt.po, share/po/it.po, share/po/es.po,
-	share/po/el.po, share/po/pt_BR.po, share/po/eu.po, share/po/ca.po,
-	share/po/ru.po, share/po/pl.po, share/po/id.po, share/po/mt.po,
-	share/po/da.po, share/po/lv.po, share/po/ga.po, share/po/be.po,
-	share/po/uz@Cyrl.po, share/po/zh_CN.po, share/po/ja.po, share/po/ms.po,
-	share/po/is.po, share/po/ko.po, share/po/ar.po, share/po/af.po,
-	share/po/fr.po, share/po/de.po, share/po/fi.po, share/po/et.po,
-	share/po/gl.po, share/po/tr.po, share/po/bs.po, share/po/tg.po,
-	share/po/uz.po, share/po/hr.po, share/po/ro.po, share/po/wa.po,
-	share/po/cy.po, share/po/th.po, share/po/vi.po, share/po/DrakX.pot,
-	share/po/az.po: updated pot file
-
-	* share/po/nb.po: updated Norwegian file
-	updated pot file
-	updated Norwegian file
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* share/po/uk.po, share/po/fa.po, share/po/sq.po, share/po/pt.po: updated
-	pot file
-	updated Farsi, Portuguese, Albanian and Ukrainian files
-
-2003/08/27  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Determine default printer already when reading in the
-	queue data,
-	this is much faster than running "foomatic-configure" a second time.
-
-	* printer/cups.pm: Added lpstat_lpv() function to list remotely defined
-	printers with
-	description and location.
-
-2003/08/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: let draconnect banner fit in french
-
-	* standalone/drakconnect: rename vbox2 as param_vbox
-	remove useless bbox8 (due to use of std dialog button box)
-	get rid of useless/badly named bbox0
-	rename combo1 as profile_combo
-	  - fix hostname setting
-	  - set hostname at the same time we apply dns changes, that is when one
-	ask to apply changes
-
-	* drakxtools.spec: 9.2-4mdk
-
-	* any.pm, printer/cups.pm: fix pot regeneration at package build time
-
-	* harddrake/v4l.pm: resync with current bttv card and tuner lists
-
-2003/08/26  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: current update
-
-2003/08/26  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakfont: fix buttons sensitive behavior
-
-2003/08/26  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install2.pm: alias meta_class=discovery with meta_class=desktop
-
-	* share/compssUsers: added [selected=default] for all section which needed
-	to be selected
-	(approximative map of existing packages).
-
-	* share/compssUsers.desktop: added [selected=desktop] when needed (same as
-	default selection (PowerPack) but
-	Gnome is removed).
-
-	* install_steps_interactive.pm: drop security level selection for desktop
-	user.
-	do not ask user for group selection if desktop meta class is used.
-
-	* install_any.pm: added default compssUsers group selection from
-	compssUser file directly (use
-	[selected=...] where ... is a list of comma separated meta_class (or
-	default for
-	no meta_class or all for all meta_class).
-	fixed all radeon card are using 3D for 3D package group.
-
-	* share/compssUsers.server: added [selected=server] for groups to be
-	selected by default.
-
-	* pkgs.pm: get selected list from compssUsers for readCompssUsers.
-
-2003/08/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po, share/po/et.po: updated Estonian, Finnish, Hungarian,
-	Norwegian and Swedish files
-	updated pot file
-	updated Estonian, Hungarian and Ukrainian files
-
-	* share/po/uk.po: updated pot file
-	updated Estonian, Hungarian and Ukrainian files
-
-	* share/po/sv.po, share/po/nb.po, share/po/fi.po: updated Estonian,
-	Finnish, Hungarian, Norwegian and Swedish files
-	updated pot file
-
-	* share/po/pt.po: updated Portuguese file
-	updated pot file
-
-	* share/po/sr@Latn.po, share/po/sk.po, share/po/eo.po, share/po/bg.po,
-	share/po/zh_TW.po, share/po/sr.po, share/po/ta.po, share/po/sl.po,
-	share/po/lt.po, share/po/it.po, share/po/es.po, share/po/el.po,
-	share/po/pt_BR.po, share/po/he.po, share/po/eu.po, share/po/ca.po,
-	share/po/ru.po, share/po/pl.po, share/po/id.po, share/po/mt.po,
-	share/po/da.po, share/po/lv.po, share/po/ga.po, share/po/be.po,
-	share/po/uz@Cyrl.po, share/po/cs.po, share/po/fa.po, share/po/zh_CN.po,
-	share/po/ja.po, share/po/ms.po, share/po/is.po, share/po/ko.po,
-	share/po/ar.po, share/po/af.po, share/po/nl.po, share/po/fr.po,
-	share/po/de.po, share/po/sq.po, share/po/gl.po, share/po/tr.po,
-	share/po/bs.po, share/po/tg.po, share/po/uz.po, share/po/hr.po,
-	share/po/ro.po, share/po/wa.po, share/po/cy.po, share/po/th.po,
-	share/po/vi.po, share/po/DrakX.pot, share/po/az.po: updated pot file
-
-	* lang.pm: updated list of available kde-i18n-xx packages
-
-	* share/fonts.tar.bz2: updated Nimbus Sans font with more cyrillic glyphs
-
-2003/08/26  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: install "autofs" pkg when using ldap (thanks to Buchan Milne)
-
-	* share/po/i18n_compssUsers: adapt to new flag [selected=...]
-
-2003/08/26  Till Kamppeter  <till at mandrakesoft.com>
-
-	* pixmaps/printer-mdk.png: Updated icon for printerdrake's dialog windows.
-
-2003/08/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-3mdk
-
-	* standalone/drakconnect: hide profile in "internet config" dialog if
-	profiles are disabled
-	fix "Internet Connection Configuration" dialog does not show up its
-	contents
-	rename --gui option as --skip-wizard option on interface team request
-	only write conf & install packages on exit (Ok press) if something
-	really has been altered so that we do not write the config twice if
-	the user already pressed the "apply" button
-	  - "Configure hostname..." button: offer to configure DNS too
-	  - (configure_hostname) kill it since it only duplicate code from
-	network/*pm
-	still more dialogs cleanups
-	add --gui in order to start in "mcc" state (aka not in wizard mode)
-	more dialog misusage and some indent fixes
-	enfore gc style for gtk+2 widgets creation
-	more layout fixes: cance/ok order coherency, no VBoxes/HButtonBoxes
-	abuses, ...
-	(configure_net) Gtk2::Dialog main area is already a vbox, so it's
-	useless to pack a vbox there idem for action area and Gtk2::HButtonBox
-	(get_intf_status) kill duplicate
-	net & lan configuration dialogs: prevent one to do concurrent config
-	changes from the gui
-	(sensitive_buttons) fix it
-	  - only allow to run one wizard at once (insensitive button if one is
-	already started)
-	  - reload the configuration once the wizard exited
-	  - prevent one to do concurrent config changes from the gui while the
-	  wizard is run (proper fix involve both fix modality/transcientness
-	  when embedded and running the wizard within the same process instead
-	  of forking it]
-
-	* network/drakfirewall.pm: fix pkg to install for samba
-
-2003/08/26  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakfont: fix buttons sensitive behavior
-
-2003/08/26  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_interactive.pm: drop security level selection for desktop
-	user.
-	do not ask user for group selection if desktop meta class is used.
-
-	* pkgs.pm: get selected list from compssUsers for readCompssUsers.
-
-	* share/compssUsers.server: added [selected=server] for groups to be
-	selected by default.
-
-	* share/compssUsers.desktop: added [selected=desktop] when needed (same as
-	default selection (PowerPack) but
-	Gnome is removed).
-
-	* share/compssUsers: added [selected=default] for all section which needed
-	to be selected
-	(approximative map of existing packages).
-
-	* install_any.pm: added default compssUsers group selection from
-	compssUser file directly (use
-	[selected=...] where ... is a list of comma separated meta_class (or
-	default for
-	no meta_class or all for all meta_class).
-	fixed all radeon card are using 3D for 3D package group.
-
-2003/08/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/uk.po, share/po/hu.po: updated Estonian,
-	Hungarian and Ukrainian files
-
-2003/08/26  Pixel  <pixel at mandrakesoft.com>
-
-	* share/po/i18n_compssUsers: adapt to new flag [selected=...]
-
-	* any.pm: install "autofs" pkg when using ldap (thanks to Buchan Milne)
-
-	* keyboard.pm: 
-	  - don't set XkbCompat to group_led, it's better to use grp_led:scroll
-	in
-	XkbOptions
-	  - also set compose:rwin if GRP_TOGGLE is not rwin_toggle. rationale:
-		  Also, for multilayout keyboards, it would be nice to also
-		  in XkbOptions "compose:rwin" to define the right windows
-		  key as the compose key (unless "rwin_toggle" has been
-		  choosen to toggle the layouts) "compose:rwin" is the
-		  default when loading a single latin layout, but is lost
-		  when loading several layouts...
-
-	* fs.pm: use fs=ext2:vfat or fs=udf:iso9600 for supermount (it needs
-	supermount-ng)
-
-2003/08/26  Till Kamppeter  <till at mandrakesoft.com>
-
-	* pixmaps/printer-mdk.png: Updated icon for printerdrake's dialog windows.
-
-2003/08/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: more last bits for 9.2-2mdk for lord pixel
-	9.2-2mdk
-
-	* standalone/drakconnect: still more dialogs cleanups
-	add --gui in order to start in "mcc" state (aka not in wizard mode)
-	more dialog misusage and some indent fixes
-	enfore gc style for gtk+2 widgets creation
-	more layout fixes: cance/ok order coherency, no VBoxes/HButtonBoxes
-	abuses, ...
-	(configure_net) Gtk2::Dialog main area is already a vbox, so it's
-	useless to pack a vbox there idem for action area and Gtk2::HButtonBox
-	(get_intf_status) kill duplicate
-	net & lan configuration dialogs: prevent one to do concurrent config
-	changes from the gui
-	(sensitive_buttons) fix it
-	  - only allow to run one wizard at once (insensitive button if one is
-	already started)
-	  - reload the configuration once the wizard exited
-	  - prevent one to do concurrent config changes from the gui while the
-	  wizard is run (proper fix involve both fix modality/transcientness
-	  when embedded and running the wizard within the same process instead
-	  of forking it]
-
-	* modules.pm (add_alias) override current setting when adding an alias
-
-	* harddrake/sound.pm, standalone/service_harddrake: while bootstrapping,
-	only write /etc/modules.conf only if we really altered it
-	(thus preventing depmod to be runned everytime)
-
-2003/08/26  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* pkgs.pm: get selected list from compssUsers for readCompssUsers.
-
-	* install_steps_interactive.pm: drop security level selection for desktop
-	user.
-	do not ask user for group selection if desktop meta class is used.
-
-	* share/compssUsers.server: added [selected=server] for groups to be
-	selected by default.
-
-	* share/compssUsers: added [selected=default] for all section which needed
-	to be selected
-	(approximative map of existing packages).
-
-	* install_any.pm: added default compssUsers group selection from
-	compssUser file directly (use
-	[selected=...] where ... is a list of comma separated meta_class (or
-	default for
-	no meta_class or all for all meta_class).
-	fixed all radeon card are using 3D for 3D package group.
-
-	* share/compssUsers.desktop: added [selected=desktop] when needed (same as
-	default selection (PowerPack) but
-	Gnome is removed).
-
-2003/08/26  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/diskdrake: do embed WebDAV configuration (fix bug #4703)
-
-	* any.pm: install "autofs" pkg when using ldap (thanks to Buchan Milne)
-
-	* diskdrake/dav.pm: focus_first on the webdav server field
-
-	* keyboard.pm: 
-	  - don't set XkbCompat to group_led, it's better to use grp_led:scroll
-	in
-	XkbOptions
-	  - also set compose:rwin if GRP_TOGGLE is not rwin_toggle. rationale:
-		  Also, for multilayout keyboards, it would be nice to also
-		  in XkbOptions "compose:rwin" to define the right windows
-		  key as the compose key (unless "rwin_toggle" has been
-		  choosen to toggle the layouts) "compose:rwin" is the
-		  default when loading a single latin layout, but is lost
-		  when loading several layouts...
-
-	* fs.pm: use fs=ext2:vfat or fs=udf:iso9600 for supermount (it needs
-	supermount-ng)
-
-2003/08/26  Till Kamppeter  <till at mandrakesoft.com>
-
-	* pixmaps/printer-mdk.png: Updated icon for printerdrake's dialog windows.
-
-2003/08/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: more last bits for 9.2-2mdk for lord pixel
-	9.2-2mdk
-
-	* modules.pm (add_alias) override current setting when adding an alias
-
-	* standalone/drakconnect: add --gui in order to start in "mcc" state (aka
-	not in wizard mode)
-	more dialog misusage and some indent fixes
-	enfore gc style for gtk+2 widgets creation
-	more layout fixes: cance/ok order coherency, no VBoxes/HButtonBoxes
-	abuses, ...
-	(configure_net) Gtk2::Dialog main area is already a vbox, so it's
-	useless to pack a vbox there idem for action area and Gtk2::HButtonBox
-	(get_intf_status) kill duplicate
-	net & lan configuration dialogs: prevent one to do concurrent config
-	changes from the gui
-	(sensitive_buttons) fix it
-	  - only allow to run one wizard at once (insensitive button if one is
-	already started)
-	  - reload the configuration once the wizard exited
-	  - prevent one to do concurrent config changes from the gui while the
-	  wizard is run (proper fix involve both fix modality/transcientness
-	  when embedded and running the wizard within the same process instead
-	  of forking it]
-
-	* harddrake/data.pm: explain data struct
-
-	* harddrake/sound.pm, standalone/service_harddrake: while bootstrapping,
-	only write /etc/modules.conf only if we really altered it
-	(thus preventing depmod to be runned everytime)
-
-2003/08/26  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/dav.pm: focus_first on the webdav server field
-
-	* keyboard.pm: 
-	  - don't set XkbCompat to group_led, it's better to use grp_led:scroll
-	in
-	XkbOptions
-	  - also set compose:rwin if GRP_TOGGLE is not rwin_toggle. rationale:
-		  Also, for multilayout keyboards, it would be nice to also
-		  in XkbOptions "compose:rwin" to define the right windows
-		  key as the compose key (unless "rwin_toggle" has been
-		  choosen to toggle the layouts) "compose:rwin" is the
-		  default when loading a single latin layout, but is lost
-		  when loading several layouts...
-
-	* any.pm: install "autofs" pkg when using ldap (thanks to Buchan Milne)
-
-	* fs.pm: use fs=ext2:vfat or fs=udf:iso9600 for supermount (it needs
-	supermount-ng)
-
-	* standalone/diskdrake: do embed WebDAV configuration (fix bug #4703)
-
-2003/08/26  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: If an HPOJ-controlled HP MF device on a parallel port
-	has an URI with
-	model reference (and not port number) tell at least in the menues that
-	it is on a parallel port.
-
-	* printer/printerdrake.pm: Let names of automatically generated queues not
-	contain the word "Series".
-
-2003/08/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* modules.pm (add_alias) override current setting when adding an alias
-
-	* standalone/service_harddrake, harddrake/sound.pm: while bootstrapping,
-	only write /etc/modules.conf only if we really altered it
-	(thus preventing depmod to be runned everytime)
-
-	* harddrake/data.pm: explain data struct
-
-	* drakxtools.spec: more last bits for 9.2-2mdk for lord pixel
-	9.2-2mdk
-
-2003/08/25  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: update
-
-2003/08/25  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po: updated po file
-	updated pot file
-
-	* share/po/uz@Cyrl.po, share/po/id.po, share/po/be.po, share/po/ru.po,
-	share/po/ja.po, share/po/he.po, share/po/ga.po, share/po/tr.po,
-	share/po/ms.po, share/po/hr.po, share/po/uz.po, share/po/nb.po,
-	share/po/ko.po, share/po/es.po, share/po/zh_CN.po, share/po/cy.po,
-	share/po/zh_TW.po, share/po/eu.po, share/po/vi.po, share/po/eo.po,
-	share/po/tg.po, share/po/sr@Latn.po, share/po/DrakX.pot, share/po/th.po,
-	share/po/lt.po, share/po/cs.po, share/po/sr.po, share/po/pt.po,
-	share/po/nl.po, share/po/hu.po, share/po/is.po, share/po/fr.po,
-	share/po/uk.po, share/po/sv.po, share/po/de.po, share/po/ca.po,
-	share/po/bs.po, share/po/et.po, share/po/lv.po, share/po/az.po,
-	share/po/it.po, share/po/ro.po, share/po/wa.po, share/po/af.po,
-	share/po/pl.po, share/po/sk.po, share/po/pt_BR.po, share/po/mt.po,
-	share/po/da.po, share/po/ta.po, share/po/fi.po, share/po/sq.po,
-	share/po/el.po, share/po/ar.po, share/po/gl.po, share/po/sl.po,
-	share/po/bg.po: updated pot file
-
-2003/08/25  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Distinguish between printers "Configured on this
-	machine" and
-	"Configured on other machines", not any more "Local Printers" and
-	"Remote Printers", so the current dialog is compatible to the new GTK2
-	dialog.
-	Fixed recognition of installed parallel HPOJ-driven MF devices.
-
-	* printer/cups.pm: Distinguish between printers "Configured on this
-	machine" and
-	"Configured on other machines", not any more "Local Printers" and
-	"Remote Printers", so the current dialog is compatible to the new GTK2
-	dialog.
-
-	* printer/printerdrake.pm: Distinguish between printers "Configured on
-	this machine" and
-	"Configured on other machines", not any more "Local Printers" and
-	"Remote Printers", so the current dialog is compatible to the new GTK2
-	dialog.
-	  - Modularized the function main() to have separate subroutines for
-	adding, setting as default, editing, and removing a printer (for new
-	  main window).
-	  - Cleaned up the code of the former function main().
-	  - Re-activated the wizard mode for adding a printer, it works again!
-
-2003/08/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakboot: fix drakboot always showing advanced stuff even
-	when --expert was not
-	passed
-
-	* share/po/fr.po: update french translation
-
-	* network/netconnect.pm: fix drakconnect not working on console (found by
-	poulpy) due to having
-	killed pre_func() which used to set a background pixmap in the old
-	days, thus the bogus test that went in.
-
-	* drakxtools.spec: 9.2-1mdk
-
-2003/08/25  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/25  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Add /etc/modules for local hardware config.
-
-2003/08/25  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Fixed recognition of installed parallel HPOJ-driven MF
-	devices.
-
-	* printer/detect.pm: Removed use of "parport_probe", we do not need to
-	support kernel 2.2.x
-	any more.
-
-2003/08/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/netconnect.pm: fix drakconnect not working on console (found by
-	poulpy) due to having
-	killed pre_func() which used to set a background pixmap in the old
-	days, thus the bogus test that went in.
-
-	* standalone/drakfloppy: this tool really is gtk2 ported, so do not trash
-	languages not handled
-	by gtk+-1.x
-
-2003/08/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po, share/po/zh_CN.po, share/po/fa.po, share/po/uk.po,
-	share/po/eu.po: updated Basque, Farsi, Hungarian, Ukrainian and Chinese
-	files
-
-2003/08/24  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Adapted version mark in HPOJ config files to the
-	current HPOJ.
-	  - Fixed expert/normal mode switch (it will perhaps be removed, but a
-	working switch makes the further development easier).
-	  - Added connectionstr() function which produces a human-readable
-	  string for the connection type, needed for new main window.
-	  - Added missing parantheses (there was a warning complaining about
-	this).
-
-	* printer/printerdrake.pm: Made the HP DeskJet 450 really being recognized
-	as a printer needing HPOJ.
-	Added HP DeskJet 450 to the models which need HPOJ.
-	  - Fixed expert/normal mode switch (it will perhaps be removed, but a
-	working switch makes the further development easier).
-	  - Added connectionstr() function which produces a human-readable
-	  string for the connection type, needed for new main window.
-	  - Added missing parantheses (there was a warning complaining about
-	this).
-
-2003/08/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: require a perl-Gtk2 that properly handle perl
-	exceptions in gtk+ callbacks
-	typo fix
-
-2003/08/23  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2003/08/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po, share/po/zh_CN.po, share/po/eu.po: updated pot file
-	updated Basque, Hungarian and Chinese files
-
-	* share/po/ta.po, share/po/pt_BR.po, share/po/fr.po, share/po/de.po,
-	share/po/cy.po, share/po/lv.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/he.po, share/po/cs.po, share/po/fi.po, share/po/ca.po,
-	share/po/ms.po, share/po/ja.po, share/po/bs.po, share/po/bg.po,
-	share/po/th.po, share/po/mt.po, share/po/el.po, share/po/et.po,
-	share/po/wa.po, share/po/pl.po, share/po/fa.po, share/po/uk.po,
-	share/po/uz@Cyrl.po, share/po/nl.po, share/po/is.po, share/po/it.po,
-	share/po/sq.po, share/po/es.po, share/po/id.po, share/po/ko.po,
-	share/po/tr.po, share/po/be.po, share/po/hr.po, share/po/vi.po,
-	share/po/sr@Latn.po, share/po/az.po, share/po/ar.po, share/po/nb.po,
-	share/po/eo.po, share/po/gl.po, share/po/sl.po, share/po/ru.po,
-	share/po/pt.po, share/po/sk.po, share/po/af.po, share/po/tg.po,
-	share/po/lt.po, share/po/ga.po, share/po/zh_TW.po, share/po/da.po,
-	share/po/ro.po, share/po/uz.po, share/po/sr.po: updated pot file
-
-2003/08/23  Till Kamppeter  <till at mandrakesoft.com>
-
-	* handle_configs.pm: if_($A, $B) got extremely slow, replaced by ( $A ? $B
-	: () ).
-
-2003/08/23  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/08/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm: as discussed with david, gc, laurent & pixel early this week,
-	since
-	gtk+ dialogs are HIG-ed and since most drakxtools' explicit gtk+
-	windows follow cancel/ok order for now, let implicit windows (that is
-	interactive written ones) follow the same order in standalone mode.
-	after release, we'll have to make ugtk2 handle one more abstractions,
-	that is taking some buttons callbacks, add buttons that have callbacks
-	and pack them in kde or gnome order depending of interface team
-	decision or maybe of runtime detection of desktop.
-
-	* standalone/icons/non-editable.png: add new icon for drakperm
-
-	* standalone/drakperm: rename $treeModel as $model since it really is a
-	ListModel, not a
-	TreeModel anymore (cosmetic)
-	  - disable up button when selected rule is the first one
-	  - disable down button when selected rule is the latest one or when
-	next rule is non editable
-	always add newly created setting at top of editable settings so that
-	we're we can sort them since they're no non editable items between old
-	& new editable ones
-	once we start to alter settings ordering, we need to save it on exit;
-	so just tell it to drakperm
-	  - fix gtk bug on moving down line
-	  - merge moving up & down callbacks
-	  - we do not have a hierarchy, so just use a s/tree/list/
-
-	* share/po/fr.po: a few more translations
-	translate last remaining non translated languages with google help
-
-	* drakxtools.spec: 9.2-0.35mdk
-	9.2-0.34mdk
-
-2003/08/22  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: typo fix s/succeed/succeeded/
-
-2003/08/22  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: updated Spanish translations
-
-2003/08/22  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: add erwan
-
-	* share/po/fr.po: fix titi
-
-	* interactive/gtk.pm: fix keyboard browsing in treeviews not always
-	centering on
-	selected row (workaround gtk2 bug not honouring centering on the
-	given row if node was closed by updating ui before requesting the
-	scrolling to the cell)
-
-2003/08/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nb.po: updated Norwegian file
-	updated pot file
-
-	* share/po/ru.po: updated Russian file
-	updated pot file
-
-	* share/po/ta.po, share/po/pt_BR.po, share/po/fr.po, share/po/de.po,
-	share/po/cy.po, share/po/lv.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/hu.po, share/po/he.po, share/po/fi.po, share/po/ca.po,
-	share/po/ms.po, share/po/ja.po, share/po/bs.po, share/po/zh_CN.po,
-	share/po/bg.po, share/po/th.po, share/po/eu.po, share/po/mt.po,
-	share/po/el.po, share/po/et.po, share/po/wa.po, share/po/pl.po,
-	share/po/fa.po, share/po/uk.po, share/po/uz@Cyrl.po, share/po/nl.po,
-	share/po/is.po, share/po/it.po, share/po/sq.po, share/po/es.po,
-	share/po/id.po, share/po/ko.po, share/po/tr.po, share/po/be.po,
-	share/po/hr.po, share/po/vi.po, share/po/sr@Latn.po, share/po/az.po,
-	share/po/ar.po, share/po/eo.po, share/po/gl.po, share/po/sl.po,
-	share/po/pt.po, share/po/sk.po, share/po/af.po, share/po/tg.po,
-	share/po/lt.po, share/po/ga.po, share/po/zh_TW.po, share/po/da.po,
-	share/po/ro.po, share/po/uz.po, share/po/sr.po: updated pot file
-
-	* lang.pm: use "Sans" as default font name
-
-	* share/po/cs.po: updated po file
-	updated pot file
-
-2003/08/22  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: fix crash on file select of "Other"
-	finish custom cron configuration - normal users can now do cron backups
-
-2003/08/22  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/detect.pm: Adapted to scli 0.2.12.
-
-	* printer/printerdrake.pm, printer/main.pm: Support for the new
-	"ptal://..." (two slashes) URIs of the new HPOJ.
-
-2003/08/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* interactive/gtk.pm (ask_fromW) split $set_advanced into $set_advanced
-	and
-	$set_advanced_raw to fix drakconnect "failling" to detect network
-	interfaces in standalone mode when in expert mode
-
-	* standalone/draksec: translate default value in help tooltips too
-	CJK fixes: use newly introduced Gtk2::WrappedLabel package
-
-	* network/drakfirewall.pm: offer samba in services list
-
-	* standalone/drakperm: renew drakperm gui (interface team feedback):
-	  - indicate if current setting is editable or not
-	  - only display current security level, editable settings or both
-
-	* ugtk2.pm: CJK fixes: use newly introduced Gtk2::WrappedLabel package
-	introduce Gtk2::WrappedLabel to factorize fixed labels for CJK
-	languages
-	(gtkset_line_wrap) export it
-
-	* share/po/fr.po: update french translation
-	minor fix (due to ala latex format used in draksec)
-	update french translation
-	update french translation
-	update french translation
-	translate draksec main label
-
-2003/08/21  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/adsl.pm: 
-	  - more use info in load_firmware_floppy
-	  - catch no floppy in drive error
-	  - catch wizcancel
-	  - add '-e 1' pppoa option for speedtouch USB
-	  - N_ instead of N, won't translate twice (guillaume has the greatest
-	member)
-
-	* network/modem.pm: fix no winmodem message/behavior
-
-2003/08/21  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-	* network/adsl.pm: s/alcatel/Alcatel/
-
-	* share/po/zh_CN.po: updated Chinese file
-
-	* share/po/fr.po: updated French file
-
-	* share/po/cs.po: updated Czech file
-
-2003/08/21  Pixel  <pixel at mandrakesoft.com>
-
-	* diskdrake/resize_ntfs.pm: display the error returned by ntfsresize (need
-	i18n though)
-
-	* standalone/draksec: fix english (thanks to Reinout van Schouwen)
-
-	* bootloader.pm: have bootsplash also for smp & enterprise kernels
-
-	* ugtk2.pm: only access $::o->{mouse}{unsafe} during install
-
-	* modules.pm: don't care if insmod'ing ohci1394 fail (bug #1972)
-
-2003/08/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm: 
-	  - (gtkset_line_wrap) introduce a Gtk2::Label wrapper for
-	set_line_wrap()
-	  - (create_box_with_title)
-	  o factorize label creation
-	  o fix label wrongly wrap cjk languages by enabling its wrapping
-	    (real bugs is that GtkLabel does not really know its geometry: see
-	    gtk+ bugs #118045, #118046, #101968 and #104188)
-	move ugtk2 related language fixes into ugtk2 jail
-
-	* harddrake/sound.pm: typo fixes from Arpad Biro
-
-	* standalone.pm: move ugtk2 related language fixes into ugtk2 jail
-
-	* standalone/harddrake2: workaround gtk bug #118047
-
-2003/08/21  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated to current pot
-
-2003/08/21  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/modem.pm: fix no winmodem message/behavior
-
-	* network/adsl.pm: 
-	  - allow user to copy firmware from a floppy
-	  - fix 'previous' behavior
-	  - change wrong url
-
-	* share/po/id.po, share/po/af.po, share/po/hr.po, share/po/eo.po,
-	share/po/de.po, share/po/ar.po, share/po/zh_TW.po, share/po/nb.po,
-	share/po/fr.po, share/po/ko.po, share/po/el.po, share/po/da.po,
-	share/po/sr@Latn.po, share/po/lt.po, share/po/eu.po, share/po/nl.po,
-	share/po/he.po, share/po/tr.po, share/po/wa.po, share/po/uz@Cyrl.po,
-	share/po/ta.po, share/po/pl.po, share/po/az.po, share/po/be.po,
-	share/po/mt.po, share/po/uk.po, share/po/hu.po, share/po/uz.po,
-	share/po/fa.po, share/po/ja.po, share/po/it.po, share/po/pt.po,
-	share/po/ro.po, share/po/sq.po, share/po/sk.po, share/po/ru.po,
-	share/po/fi.po, share/po/gl.po, share/po/cs.po, share/po/sv.po,
-	share/po/th.po, share/po/es.po, share/po/sl.po, share/po/lv.po,
-	share/po/ca.po, share/po/sr.po, share/po/pt_BR.po, share/po/vi.po,
-	share/po/tg.po, share/po/cy.po, share/po/zh_CN.po, share/po/bg.po,
-	share/po/is.po, share/po/ga.po, share/po/et.po, share/po/bs.po: fix
-	firmware url
-
-2003/08/21  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/21  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* pkgs.pm: use perl-URPM 0.94
-	really fixed bad content generated.
-	fixed next key block not taken into accound.
-
-	* install_any.pm: updated with new perl-URPM 0.94 (simplified code)
-	avoid 0 to be dumped in urpmi.cfg :(
-	added some log when importing pbukey block and when key id have been
-	found.
-	make sure other key are added to urpmi.cfg when imported.
-
-2003/08/21  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/merge_from_pcitable: also display probe.c entries
-	that are completely missing from pcitable
-
-	* mdk-stage1/pcmcia_/probe.c: 0x1524 0x1411 is a yenta_socket on Asus
-	Pundit machine (laurent at pschit.net)
-
-	* share/rpmsrate: s/freeciv/freeciv-client/
-
-2003/08/21  keld
-
-	* share/po/da.po: updates
-	soft/GtkMdkWidgets/po/da.po soft/mdkkdm/po/da.po
-	soft/urpmi/po/da.po soft/userdrake2/po/da.po
-	gi/perl-install/share/po/da.po
-
-2003/08/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-	updated pot file
-
-	* share/po/zh_CN.po: updated Chinese file
-	updated pot file
-
-	* standalone/drakbackup: fixed English typos
-
-	* share/po/fr.po: updated French file
-	updated pot file
-
-	* share/po/cs.po: updated Czech file
-	updated pot file
-
-	* standalone/logdrake: Changed back NC() to N() (functionality will be
-	merged)
-	definition and use of an NC() function (translation with context, kde
-	like)
-
-	* share/po/id.po, share/po/af.po, share/po/hr.po, share/po/eo.po,
-	share/po/de.po, share/po/ar.po, share/po/zh_TW.po, share/po/nb.po,
-	share/po/ko.po, share/po/el.po, share/po/da.po, share/po/sr@Latn.po,
-	share/po/lt.po, share/po/eu.po, share/po/he.po, share/po/tr.po,
-	share/po/wa.po, share/po/uz@Cyrl.po, share/po/ta.po, share/po/pl.po,
-	share/po/az.po, share/po/be.po, share/po/mt.po, share/po/uk.po,
-	share/po/hu.po, share/po/uz.po, share/po/fa.po, share/po/ja.po,
-	share/po/it.po, share/po/pt.po, share/po/ro.po, share/po/sq.po,
-	share/po/sk.po, share/po/ru.po, share/po/fi.po, share/po/gl.po,
-	share/po/sv.po, share/po/th.po, share/po/es.po, share/po/DrakX.pot,
-	share/po/sl.po, share/po/lv.po, share/po/ca.po, share/po/sr.po,
-	share/po/pt_BR.po, share/po/vi.po, share/po/tg.po, share/po/ms.po,
-	share/po/cy.po, share/po/bg.po, share/po/is.po, share/po/ga.po,
-	share/po/et.po, share/po/bs.po: updated pot file
-
-	* common.pm: perl_checker complain avout using N(@_) so NC() has been
-	rewritten as
-	a duplicate of N() plus one line
-	definition and use of an NC() function (translation with context, kde
-	like)
-
-2003/08/21  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: when umount fails, try killing fam and trying again
-
-	* diskdrake/resize_ntfs.pm: display the error returned by ntfsresize (need
-	i18n though)
-
-	* Xconfig/card.pm: don't propose XF3 when $force_xf4
-	fix typo ($::force_xf4 doesn't exist anymore)
-
-	* ugtk2.pm: only access $::o->{mouse}{unsafe} during install
-
-	* partition_table.pm: 
-	  - fix call to openit()
-	  - replace *F with $F
-
-	* fsedit.pm: simplify
-	allocatePartitions() resulted in a small unallocated area at the end of
-	the
-	drive when:
-	  - suggest_part() reserves some room for the other partitions which are
-	going to
-	be added next. For maxsize limited partition, it reserves maxsize (if
-	maxsize
-	is reached)
-	  - suggest_part() which adds the last partition limited by maxsize can
-	be
-	called on a partition a little bigger than maxsize due to cylinder
-	boundary
-	adjustments on previous partition creations. In that case, it doesn't
-	use the
-	full area.
-	It occured for example with the current $fsedit::suggestions{server}.
-	The fix chosen is to ensure the last suggest_part() is called with a
-	size
-	defined as maxsize <= size < maxsize + cylinder_size.
-
-	* modules.pm: don't care if insmod'ing ohci1394 fail (bug #1972)
-
-	* standalone/draksec: fix english (thanks to Reinout van Schouwen)
-
-	* Xconfig/test.pm: fix typo
-	  - use $TMPDIR before using $HOME/tmp
-	  - if $HOME doesn't exist, it will use /tmp which is safe when using
-	secured_file()
-
-	* common.pm: no need for NC(), doing it in translate() in any case
-
-2003/08/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakxtv: only offer to configure xawtv if bttv was configured
-	fix warnings with diagnostics pragma
-
-	* drakxtools.spec: 9.2-0.33mdk
-
-	* ugtk2.pm: move ugtk2 related language fixes into ugtk2 jail
-	chinese badly wrap with labels too
-	the scrolled text is correctly sized, so do not let it compete with
-	the options box and the advanced box for availlable space
-
-	* harddrake/sound.pm: typo fixes from Arpad Biro
-
-	* standalone.pm: move ugtk2 related language fixes into ugtk2 jail
-	set $::o in standalone mode too (because of guillaume fixes for "pango
-	vs cjk" match)
-
-	* harddrake/v4l.pm: return ok/cancel state
-
-2003/08/21  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: simplify
-	allocatePartitions() resulted in a small unallocated area at the end of
-	the
-	drive when:
-	  - suggest_part() reserves some room for the other partitions which are
-	going to
-	be added next. For maxsize limited partition, it reserves maxsize (if
-	maxsize
-	is reached)
-	  - suggest_part() which adds the last partition limited by maxsize can
-	be
-	called on a partition a little bigger than maxsize due to cylinder
-	boundary
-	adjustments on previous partition creations. In that case, it doesn't
-	use the
-	full area.
-	It occured for example with the current $fsedit::suggestions{server}.
-	The fix chosen is to ensure the last suggest_part() is called with a
-	size
-	defined as maxsize <= size < maxsize + cylinder_size.
-
-2003/08/20  erwan
-
-	* share/rpmsrate: Decreasing weight of pbs (pro),
-	Increasing weight of ScalablePBS & Maui
-
-2003/08/20  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/20  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* mouse.pm: added emulate wheel support (a bit hacky though) (bug 3976)
-
-	* install_any.pm: added missing require.
-	added pubkey and rpmdb key importation.
-
-	* Xconfig/parse.pm: fix bug 3976.
-
-	* pkgs.pm: added pubkey support for medium.
-
-	* share/list: added URPM::Signature module needed to parse pubkey and
-	import them to rpmdb.
-
-2003/08/20  gbeauchesne
-
-	* tools/x86_64/busybox: Add busybox/amd64 compiled with dietlibc
-
-	* c/smp.c: Use x86 smp detection scheme on amd64 instead of the ugly dmesg
-	workaround.
-
-	* mdk-stage1/pcmcia_/cardmgr.c: Use "%p" specifier as "Base" is likely to
-	be an address.
-
-	* mdk-stage1/ppp/pppd/sys-linux.c: Use <net/if_arp.h> thusly bypassing
-	need for <linux/byteorder/generic.h>
-
-	* Makefile: Use busybox in stage2 on AMD64
-
-2003/08/20  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/fonts.tar.bz2: re-put etc/fonts/fonts.conf, pablo removed it in
-	previous commit, it broke the whole installation program starting up :)
-
-	* tools/make_lang_png_transparent.c: this file allows to make an
-	antialiased black-on-white png, antialiased black-on-transparent
-	it's used for perl-install/pixmaps/langs/lang-*.png
-
-	* pixmaps/langs/lang-ve.png, pixmaps/langs/lang-gu.png,
-	pixmaps/langs/lang-as.png, pixmaps/langs/lang-se.png,
-	pixmaps/langs/lang-mr.png, pixmaps/langs/lang-uz.png,
-	pixmaps/langs/lang-xh.png, pixmaps/langs/lang-ne.png,
-	pixmaps/langs/lang-ml.png, pixmaps/langs/lang-li.png,
-	pixmaps/langs/lang-zu.png, pixmaps/langs/lang-ku.png,
-	pixmaps/langs/lang-uz@Cyrl.png, pixmaps/langs/lang-te.png,
-	pixmaps/langs/lang-st.png, pixmaps/langs/lang-ss.png: make them
-	transparent
-
-2003/08/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tg.po, share/po/da.po, share/po/ro.po, share/po/sv.po,
-	share/po/bs.po, share/po/DrakX.pot, share/po/az.po, share/po/uz.po,
-	share/po/cs.po, share/po/ar.po, share/po/ko.po, share/po/cy.po,
-	share/po/tr.po, share/po/gl.po, share/po/ga.po, share/po/nl.po,
-	share/po/ja.po, share/po/eo.po, share/po/wa.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/be.po, share/po/fr.po, share/po/ta.po,
-	share/po/sl.po, share/po/es.po, share/po/fi.po, share/po/hu.po,
-	share/po/pl.po, share/po/el.po, share/po/et.po, share/po/eu.po,
-	share/po/sk.po, share/po/lv.po, share/po/bg.po, share/po/pt.po,
-	share/po/zh_CN.po, share/po/sr.po, share/po/uk.po, share/po/af.po,
-	share/po/zh_TW.po, share/po/he.po, share/po/hr.po, share/po/vi.po,
-	share/po/id.po, share/po/uz@Cyrl.po, share/po/th.po, share/po/de.po,
-	share/po/ru.po, share/po/fa.po, share/po/pt_BR.po, share/po/mt.po,
-	share/po/nb.po, share/po/ca.po, share/po/lt.po, share/po/is.po: updated
-	pot file
-
-	* keyboard.pm, share/keyboards.tar.bz2: Added choice of Irish keyboard;
-	updated the Georgian "latin layout" one.
-
-	* share/po/it.po: updated pot file
-	updated Italian file
-
-2003/08/20  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm, modules.pm, install_steps.pm: load
-	detected firewire modules during install
-
-	* detect_devices.pm: add firewire_probe() and use it in probeall()
-
-	* fsedit.pm, security/l10n.pm: fix english (thanks to Arpad Biro)
-
-2003/08/20  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakTermServ: Text typos - Arpad Biro
-
-2003/08/20  siegel
-
-	* share/po/de.po: updates
-
-2003/08/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm: standalone wizards: increase height to prevent some hidden or
-	cutted
-	buttons (some locales and some steps may still be partially hidden)
-
-	* standalone/logdrake: annotate load for translators (Arpad Biro)
-	only complain if an error really happened
-
-	* standalone.pm: frederic crozat said that border is ugly for standalone
-	tools.
-	so let it be used only by install.
-
-	* share/po/fr.po: fix #4787
-
-2003/08/20  Pixel  <pixel at mandrakesoft.com>
-
-	* detect_devices.pm: add firewire_probe() and use it in probeall()
-
-	* modules.pm, install_steps.pm, install_steps_interactive.pm: load
-	detected firewire modules during install
-
-2003/08/19  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Partially updated
-
-2003/08/19  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/tools.pm: fix internet reconnection in mcc
-
-2003/08/19  erwan
-
-	* share/rpmsrate: Switching to ScalablePBS
-
-	* install_any.pm: Fixing Nvidia detection.. Many were missing due to wrong
-	regexp
-
-2003/08/19  gbeauchesne
-
-	* mdk-stage1/dietlibc/librpc/pmap_getport.c: Gracefully handle IPPROTO_TCP
-	in pmap_getport() [PR libc/4943]
-
-	* share/list: lib64 fixes. Make sure we grab Gtk2.pm
-
-	* mdk-stage1/dietlibc/librpc/xdr.c, mdk-stage1/dietlibc/librpc/clnt_udp.c,
-	mdk-stage1/dietlibc/librpc/clnt_tcp.c: 64-bit clean RPC code enough to
-	let MDK stage1 do NFS mounts
-
-	* mdk-stage1/dietlibc/librpc/xdr_mem.c,
-	mdk-stage1/dietlibc/librpc/xdr_rec.c: 64-bit clean RPC code enough to
-	let MDK stage1 do NFS mounts
-	XDR security fix from glibc [CAN 2003-0028]
-
-	* mdk-stage1/dietlibc/lib/htonl.c, mdk-stage1/dietlibc/lib/htons.c,
-	mdk-stage1/dietlibc/include/netinet/in.h: Fix htonl() on 64-bit
-	platforms
-
-	* mdk-stage1/Makefile: Build ppp stuff on AMD64 too
-
-	* Xconfig/card.pm, install_steps_gtk.pm: Use xf4 on AMD64 too
-
-	* mdk-stage1/ppp/pppd/utils.c: Fix varargs for AMD64
-
-	* install_any.pm: 
-	  - Don't care about BIGMEM stuff for IA-64 & AMD64
-	  - Handle platforms that are only aware of all.img
-
-	* partition_table.pm: 
-	  - Merge in AMD64 tree
-	  - Handle EFI partitions on IA-64
-
-	* fsedit.pm: Handle /boot/efi as an EFI partition
-
-	* any.pm: Merge from AMD64 branch: lib64 fixes
-
-	* mdk-stage1/dietlibc/librpc/xdr_stdio.c: XDR security fix from glibc [CAN
-	2003-0028]
-
-	* share/list.ia64, share/list.x86_64: AMD64 updates for 9.2
-
-	* mdk-stage1/dietlibc/include/sys/types.h: Really match dietlibc 0.22 for
-	<sys/types.h> u_long definition though
-	it ought to be uint32_t.
-
-	* fs.pm: Handle EFI partitions. umount syscall does not exist on AMD64,
-	use umount2
-
-2003/08/19  keld
-
-	* share/po/da.po: updates
-	soft/rpmdrake/po/da.po gi/perl-install/share/po/da.po
-	soft/bootsplash/po/da.po
-
-2003/08/19  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/ro.po, share/po/et.po, share/po/wa.po,
-	share/po/nl.po, share/po/ja.po, share/po/uz@Cyrl.po, share/po/el.po,
-	share/po/th.po, share/po/be.po, share/po/gl.po, share/po/id.po,
-	share/po/bg.po, share/po/uz.po, share/po/af.po, share/po/ru.po,
-	share/po/tg.po, share/po/lv.po, share/po/ca.po, share/po/vi.po,
-	share/po/ko.po, share/po/bs.po, share/po/is.po, share/po/he.po,
-	share/po/lt.po, share/po/ta.po, share/po/sl.po, share/po/fi.po,
-	share/po/de.po, share/po/DrakX.pot, share/po/uk.po, share/po/eu.po,
-	share/po/ga.po, share/po/tr.po, share/po/mt.po, share/po/cy.po,
-	share/po/es.po, share/po/sv.po, share/po/fr.po, share/po/sr.po,
-	share/po/zh_TW.po, share/po/da.po, share/po/nb.po, share/po/az.po,
-	share/po/pt_BR.po, share/po/eo.po, share/po/sk.po, share/po/pl.po,
-	share/po/hr.po, share/po/pt.po, share/po/sq.po, share/po/hu.po,
-	share/po/sr@Latn.po, share/po/it.po: updated pot file
-
-	* standalone/drakbackup, help.pm: Fixed typos
-
-	* share/po/fa.po: updated Farsi file
-	updated pot file
-
-	* share/po/cs.po, share/po/ar.po: updated Arabic and Czech files
-	updated pot file
-
-	* share/fonts.tar.bz2: Updated Nimbus Sans L font (some wrong cyrillic
-	glyphs fixed by
-	Mashrab Kuvatov <kmashrab@uni-bremen.de>)
-
-2003/08/19  Pixel  <pixel at mandrakesoft.com>
-
-	* modules.pm, standalone/drakxtv, detect_devices.pm, harddrake/data.pm,
-	mouse.pm, standalone/draksound: full pci probe does not freeze anymore,
-	removing code work-arounding the freeze
-
-	* install_steps.pm: add resume=/dev/XXX where /dev/XXX is the swap
-	partition (when the swap partition is bigger than ram size)
-
-	* standalone/drakpxe: "xxx or xxx" in list context is always bad!
-
-	* network/netconnect.pm: perl_checker compliance (revert non usefull titi
-	change)
-
-	* standalone/drakhelp, standalone/drakperm, standalone/drakautoinst,
-	pkgs.pm: perl_checker compliance
-
-	* share/po/help_xml2pm.pl: remove debug code
-	adapt to new documentation layout
-
-	* standalone/adduserdrake: fix any::write_passwd_user() call
-
-	* modules/interactive.pm: do translate choices N_("Yes"), N_("No"),
-	N_("See hardware info")
-	(thanks to Arpad Biro)
-	full pci probe does not freeze anymore, removing code work-arounding the
-	freeze
-
-	* help.pm: new version from XML doc
-
-2003/08/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* detect_devices.pm: help perl_checker somewhat
-	pci hardware discovery: do full-probe by default
-
-	* standalone/logdrake: mark one more string as translatable (spoted by
-	Arpad Biro)
-	remove unused variable
-
-	* ugtk2.pm: remove broken and unused gtkexpand()
-
-	* standalone/drakconnect: mark one more string as translatable (spoted by
-	Arpad Biro)
-	readd LANGUAGE=C
-	pablo say that redefining LC_* is useless if LC_ALL is defined as the
-	later overrides and take priority over the former
-	add perl_checker hint
-	(update_intbutt) consolidate internet connection button switch code
-	  - use real known interface name everywhere not guessed one
-	(having eth0 and eth9 would resulting in displaying eth0 & eth1
-	  before), thus enabling to get rid of get_eth_ip()
-	  - replace build_list() by update_list() that fix flicker on list
-	  update: only add/remove added/removed interfaces, just update fields
-	  for others
-
-	* install_steps.pm: fix brown paper bug #4702 ...
-
-	* drakxtools.spec: first bits of 9.2-0.32mdk
-
-	* interactive/gtk.pm: show advanced options by default if --expert was
-	passed or if expect
-	checkbox was checked (#4353)
-
-	* commands.pm, c/stuff.xs.pl: pci hardware discovery: do full-probe by
-	default
-
-	* standalone/drakfloppy: translate one more string (already translated as
-	this is a double)
-
-2003/08/18  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated with current pot
-
-2003/08/18  keld
-
-	* share/po/da.po: Updates
-	soft/menu-messages/da.po soft/userdrake2/po/da.po
-	gi/perl-install/share/po/da.po
-
-2003/08/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/hu.po, share/po/it.po: updated pot file
-	updated pot file
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/zh_CN.po, share/po/ro.po, share/po/cs.po, share/po/wa.po,
-	share/po/nl.po, share/po/ja.po, share/po/uz@Cyrl.po, share/po/el.po,
-	share/po/th.po, share/po/be.po, share/po/gl.po, share/po/bg.po,
-	share/po/uz.po, share/po/af.po, share/po/ru.po, share/po/tg.po,
-	share/po/lv.po, share/po/ca.po, share/po/vi.po, share/po/ar.po,
-	share/po/ko.po, share/po/bs.po, share/po/is.po, share/po/he.po,
-	share/po/lt.po, share/po/ta.po, share/po/sl.po, share/po/fi.po,
-	share/po/fa.po, share/po/de.po, share/po/DrakX.pot, share/po/uk.po,
-	share/po/eu.po, share/po/ga.po, share/po/tr.po, share/po/mt.po,
-	share/po/cy.po, share/po/es.po, share/po/sv.po, share/po/fr.po,
-	share/po/sr.po, share/po/zh_TW.po, share/po/az.po, share/po/nb.po,
-	share/po/pt_BR.po, share/po/eo.po, share/po/sk.po, share/po/hr.po,
-	share/po/pl.po, share/po/pt.po, share/po/sq.po, share/po/sr@Latn.po:
-	updated pot file
-
-	* share/po/da.po: updated Danish file
-	updated pot file
-
-2003/08/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: typo fix
-
-	* drakxtools.spec: 9.2-0.31mdk (aka do not forget about killing poulpy)
-	9.2-0.30mdk
-
-2003/08/18  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: updated
-
-2003/08/18  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - fix up/down interface detection
-	  - do not wipe out IP and NETMASK when "No ip" is filled in
-	  - fix typo
-
-2003/08/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/cs.po, share/po/nb.po, share/po/uz@Cyrl.po,
-	share/po/uz.po: updated Czech, Indonesian, Norwegian and Uzbek files
-
-	* standalone/drakTermServ: splitted too big text into smaller chunks for
-	translators
-
-2003/08/18  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: progess -> progress typo
-
-2003/08/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: typo fix
-	(configure_lan) fix crash on interface enabling/disabling
-	(get_intf_status) factorize translations and use upcase initale
-	better message when no ip (aka interface down or broken)
-
-	* network/netconnect.pm, network/isdn.pm, network/modem.pm: fix some
-	previous callback in drakconnect wizard mode
-
-	* standalone/drakfloppy: perl_checker fixes
-	sort modules and directories in treeview
-	  - fix long-standing broken mkbootdisk call bug
-	  - btw fix the passing of mkinirtd arguments to mkbootdisk
-	  - save the modules list on exit and restore it on load
-	  - simplify modules list managment btw
-	  - consolidate some code in get_file_size()
-	try to be more user friendly:
-	  - if no error, display a success message, then exit
-	  - on error, instead of displaying the raw exit code that has no
-	meaning for
-	the end user, display in red the log message of mkbootdisk
-	  - remove insane expert button and so called expert frame
-	make testing mode usefull for debugging drakfloppy
-
-	* .perl_checker: 
-	  - we do not use anymore perl-GTK
-	  - let be able to parse ugtk2
-
-	* standalone/harddrake2: display the right information when no selected
-	device
-	use new create_dialog api to get better modal dialogs
-
-	* ugtk2.pm (_create_dialog, create_dialog) let support the same api as
-	new() and
-	threat transient option
-	(info_dialog) introduce another dialog helper
-	kill buggy and no more used gtkbuttonset()
-
-2003/08/17  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: allow hostname change in mcc
-	perl_checker
-
-2003/08/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-	updated Farsi and Hungarian files
-
-	* share/po/sk.po, share/po/es.po: updated Hungarian file
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/po/fa.po: updated Farsi and Hungarian files
-
-2003/08/17  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/08/16  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-	updated Bulgarian, Estonian, Basque, Hungarian, Albanian, Uzbek and
-	Chinese
-
-	* share/po/et.po, share/po/bg.po, share/po/sq.po, share/po/zh_CN.po,
-	share/po/eu.po, share/po/uz@Cyrl.po, share/po/uz.po: updated Bulgarian,
-	Estonian, Basque, Hungarian, Albanian, Uzbek and Chinese
-
-2003/08/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sq.po, share/po/lv.po, share/po/hu.po, share/po/eo.po,
-	share/po/cs.po, share/po/uz@Cyrl.po, share/po/sr@Latn.po,
-	share/po/uz.po, share/po/af.po, share/po/ga.po, share/po/id.po,
-	share/po/tg.po, share/po/sl.po, share/po/da.po, share/po/th.po,
-	share/po/hr.po, share/po/uk.po, share/po/ko.po, share/po/mt.po,
-	share/po/lt.po, share/po/bs.po, share/po/wa.po, share/po/sr.po,
-	share/po/nl.po, share/po/de.po, share/po/fi.po, share/po/ro.po,
-	share/po/he.po, share/po/tr.po, share/po/bg.po, share/po/fr.po,
-	share/po/zh_TW.po, share/po/DrakX.pot, share/po/es.po, share/po/cy.po,
-	share/po/it.po, share/po/pt.po, share/po/zh_CN.po, share/po/pt_BR.po,
-	share/po/sv.po, share/po/ru.po, share/po/is.po, share/po/ja.po,
-	share/po/be.po, share/po/ta.po, share/po/fa.po, share/po/el.po,
-	share/po/vi.po, share/po/et.po, share/po/sk.po, share/po/pl.po,
-	share/po/ar.po, share/po/ca.po, share/po/nb.po, share/po/eu.po,
-	share/po/gl.po, share/po/az.po: updated pot file
-
-2003/08/14  keld
-
-	* share/po/da.po: update
-	gi/perl-install/share/po/da.po
-	updates
-	soft/drakcronat/po/da.po soft/rpmdrake/po/da.po
-	soft/urpmi/po/da.po gi/perl-install/share/po/da.po
-	Updates
-	po/po/da.po gi/perl-install/share/po/da.po
-
-2003/08/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bg.po, share/po/nb.po: updated Bulgarian and Norwegian files
-	updated Turkish file
-
-	* share/po/sq.po, share/po/lv.po, share/po/hu.po, share/po/eo.po,
-	share/po/cs.po, share/po/uz@Cyrl.po, share/po/sr@Latn.po,
-	share/po/uz.po, share/po/af.po, share/po/ga.po, share/po/id.po,
-	share/po/tg.po, share/po/sl.po, share/po/da.po, share/po/th.po,
-	share/po/hr.po, share/po/uk.po, share/po/ko.po, share/po/mt.po,
-	share/po/lt.po, share/po/bs.po, share/po/wa.po, share/po/sr.po,
-	share/po/de.po, share/po/fi.po, share/po/ro.po, share/po/he.po,
-	share/po/tr.po, share/po/fr.po, share/po/zh_TW.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/cy.po, share/po/it.po, share/po/pt.po,
-	share/po/zh_CN.po, share/po/pt_BR.po, share/po/sv.po, share/po/ru.po,
-	share/po/is.po, share/po/ja.po, share/po/be.po, share/po/ta.po,
-	share/po/fa.po, share/po/el.po, share/po/vi.po, share/po/et.po,
-	share/po/sk.po, share/po/pl.po, share/po/ar.po, share/po/ca.po,
-	share/po/eu.po, share/po/gl.po, share/po/az.po: updated Turkish file
-
-	* share/po/nl.po: updated Dutch file
-	updated Turkish file
-
-2003/08/14  Pixel  <pixel at mandrakesoft.com>
-
-	* c/stuff.xs.pl: in floppy_info(), check ioctl success and use
-	FDPOLLDRVSTAT (copied from kudzu code)
-
-2003/08/14  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: start user definable crontab entry - sorry
-	translators, new strings :(
-
-2003/08/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/zh_TW.po, share/po/eo.po, share/po/eu.po,
-	share/po/zh_CN.po, share/po/vi.po, share/po/be.po, share/po/et.po,
-	share/po/pl.po, share/po/tr.po, share/po/ca.po, share/po/uk.po,
-	share/po/it.po, share/po/is.po, share/po/th.po, share/po/mt.po,
-	share/po/id.po, share/po/fi.po, share/po/el.po, share/po/wa.po,
-	share/po/lt.po, share/po/ar.po, share/po/bg.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/nl.po, share/po/pt.po, share/po/fa.po,
-	share/po/sl.po, share/po/de.po, share/po/uz@Cyrl.po, share/po/ja.po,
-	share/po/sr@Latn.po, share/po/he.po, share/po/hr.po, share/po/gl.po,
-	share/po/nb.po, share/po/da.po, share/po/fr.po, share/po/cs.po,
-	share/po/bs.po, share/po/sk.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sq.po, share/po/hu.po, share/po/ga.po, share/po/tg.po,
-	share/po/ta.po, share/po/sr.po, share/po/ko.po, share/po/ro.po,
-	share/po/es.po, share/po/uz.po, share/po/az.po, share/po/af.po,
-	share/po/lv.po: updated Turkish file
-
-2003/08/14  Pixel  <pixel at mandrakesoft.com>
-
-	* c/stuff.xs.pl: in floppy_info(), check ioctl success and use
-	FDPOLLDRVSTAT (copied from kudzu code)
-
-2003/08/14  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: start user definable crontab entry - sorry
-	translators, new strings :(
-
-2003/08/13  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: fix mcc lan changes (fix at least #4088)
-
-2003/08/13  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/13  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* rescue/list.i386: updated with xfs_progs.
-
-	* pkgs.pm: added log for checking deselection (check deadlock unless gtk
-	are doing them).
-	workaround for rpmdb problems of opening Conflictname and Triggername
-	files.
-
-	* share/list.i386: updated with newer xfs_progs.
-
-	* standalone/drakpxe: fixed to match new pxe dhcp.conf configuration file.
-
-	* install_any.pm: fixed to build an inflexion point in list file (so that
-	urpmi can found it).
-	generate a list file if a macro is used (and only in this case).
-	fixed with_hdlist possibly incorrect.
-	added tiny support for arch dependant directory.
-
-2003/08/13  gbeauchesne
-
-	* Makefile: Use bash in stage2 on IA-64
-
-	* mdk-stage1/Makefile: Fix merge from amd64-branch
-
-	* rescue/list.x86_64, rescue/list: Merge with amd64-branch (rpm libdir is
-	always /usr/lib/rpm, update lists)
-
-2003/08/13  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/zh_TW.po, share/po/eo.po,
-	install_steps_interactive.pm, share/po/eu.po, share/po/zh_CN.po,
-	share/po/vi.po, share/po/be.po, standalone/drakbackup, share/po/et.po,
-	share/po/pl.po, share/po/tr.po, share/po/ca.po, share/po/uk.po,
-	share/po/it.po, share/po/is.po, share/po/th.po, share/po/mt.po,
-	share/po/id.po, share/po/fi.po, share/po/el.po, share/po/wa.po,
-	share/po/lt.po, share/po/ar.po, share/po/bg.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/nl.po, share/po/pt.po, share/po/fa.po,
-	share/po/sl.po, share/po/br.po, share/po/de.po, share/po/uz@Cyrl.po,
-	share/po/ja.po, share/po/sr@Latn.po, share/po/he.po, share/po/hr.po,
-	share/po/gl.po, share/po/nb.po, share/po/da.po, share/po/fr.po,
-	share/po/cs.po, share/po/bs.po, share/po/sk.po, share/po/sv.po,
-	share/po/sq.po, share/po/hu.po, share/po/ga.po, share/po/tg.po,
-	share/po/ta.po, share/po/sr.po, share/po/ko.po, share/po/ro.po,
-	share/po/es.po, standalone/drakboot, share/po/uz.po, share/po/az.po,
-	share/po/af.po, share/po/lv.po: some english typo fixes thx to Arpad
-	Biro
-
-	* mdk-stage1/probing.c: full pci probe can't be run with fopen/fread
-	because we might read too many bytes. this was the reason for freezes on
-	some boxes from drakx, that may impact stage1 also, so better change
-	that.
-
-2003/08/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: corrected typo
-
-	* share/po/cy.po, share/po/zh_TW.po, share/po/eo.po, share/po/eu.po,
-	share/po/zh_CN.po, share/po/vi.po, share/po/be.po, share/po/et.po,
-	share/po/pl.po, share/po/tr.po, share/po/ca.po, share/po/uk.po,
-	share/po/it.po, share/po/is.po, share/po/th.po, share/po/mt.po,
-	share/po/id.po, share/po/fi.po, share/po/el.po, share/po/wa.po,
-	share/po/lt.po, share/po/ar.po, share/po/bg.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/nl.po, share/po/pt.po, share/po/fa.po,
-	share/po/sl.po, share/po/de.po, share/po/uz@Cyrl.po, share/po/ja.po,
-	share/po/sr@Latn.po, share/po/he.po, share/po/hr.po, share/po/gl.po,
-	share/po/nb.po, share/po/da.po, share/po/fr.po, share/po/cs.po,
-	share/po/bs.po, share/po/sk.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sq.po, share/po/hu.po, share/po/ga.po, share/po/tg.po,
-	share/po/ta.po, share/po/sr.po, share/po/ko.po, share/po/ro.po,
-	share/po/es.po, share/po/uz.po, share/po/az.po, share/po/af.po,
-	share/po/lv.po: updated pot file
-	updated pot file
-
-	* harddrake/sound.pm: fixed typo
-
-2003/08/12  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* drakxtools.spec: drakxtools depends on gurpmi (do_pkgs->install for
-	example)
-
-2003/08/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/he.po: updated Hebrew file
-
-	* share/po/cs.po: updated Czech file
-	updated Czech file
-
-2003/08/12  Pixel  <pixel at mandrakesoft.com>
-
-	* share/gen_locales.sh: by the way, gen_locales.sh makes an error because
-	/usr/X11R6/lib/X11/locale/common doesn't exist anymore. It used to
-	contain
-	ximcp.so.2 xlcDef.so.2 xlcUTF8Load.so.2
-	          xlibi18n.so.2 xlocale.so.2 xomGeneric.so.2
-	in mdk9.0, but mdk9.1 install was without it and it was ok...
-
-	* diskdrake/smbnfs_gtk.pm: do pop the "do you want to install samba?"
-	(otherwise when cancel is pressed,
-	drakconf thinks the install exited abnormally since no window was
-	embedded
-	whereas "diskdrake --smb" is normally embedded)
-
-	* lang.pm: > During the installation when one chooses Uzbek (latin) as a
-	language the next
-	> installation stage comes in English. However, DrakX creates
-	> /usr/share/locale_special/uz/LC_MESSAGES/libDrakX.mo and
-	> /usr/share/locale/uz/LC_* files.
-	this comes from during_install__l2charset() returning UNICODE which is
-	not recognised.
-
-2003/08/12  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: medias -> media
-	Mb -> MB [Bug 4381]
-
-2003/08/11  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* share/rpmsrate: added bash-completion in TERMINALS section.
-
-2003/08/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/zh_TW.po, share/po/eo.po, share/po/eu.po,
-	share/po/zh_CN.po, share/po/vi.po, share/po/be.po, share/po/pl.po,
-	share/po/tr.po, share/po/ca.po, share/po/uk.po, share/po/it.po,
-	share/po/is.po, share/po/th.po, share/po/mt.po, share/po/id.po,
-	share/po/fi.po, share/po/el.po, share/po/wa.po, share/po/lt.po,
-	share/po/ar.po, share/po/bg.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/nl.po, share/po/pt.po, share/po/fa.po, share/po/sl.po,
-	share/po/de.po, share/po/uz@Cyrl.po, share/po/ja.po,
-	share/po/sr@Latn.po, share/po/he.po, share/po/hr.po, share/po/gl.po,
-	share/po/da.po, share/po/fr.po, share/po/cs.po, share/po/bs.po,
-	share/po/sk.po, share/po/DrakX.pot, share/po/sv.po, share/po/sq.po,
-	share/po/ga.po, share/po/tg.po, share/po/ta.po, share/po/sr.po,
-	share/po/ko.po, share/po/ro.po, share/po/es.po, share/po/uz.po,
-	share/po/az.po, share/po/af.po, share/po/lv.po: updated pot file
-
-	* share/po/et.po, share/po/nb.po, share/po/hu.po: updated Estonian,
-	Hungarian and Norvegian files
-	updated pot file
-
-2003/08/11  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/XFdrake: more newbie-friendly message:
-	"You need to log out and back in again for changes to take effect"
-	instead of "Please relog into %s to activate the changes"
-	(as suggested on cooker, thanks!)
-
-	* install2.pm: when any::setupBootloader_simple() fail, use
-	any::setupBootloader() afterwards
-
-	* install_steps_interactive.pm: when any::setupBootloader_simple() fail,
-	use any::setupBootloader() afterwards
-	perl_checker compliance
-
-	* .perl_checker: why were c, pkgs and URPM::Resolve excluded? i don't
-	know, but that's much
-	better when perl_checker can see them
-
-	* security/msec.pm, ugtk2.pm, scanner.pm, security/l10n.pm,
-	install_gtk.pm, services.pm: perl_checker compliance
-
-	* lvm.pm: fix typo (fix bug #4239)
-
-	* bootloader.pm: perl_checker compliance
-	sanitize_ver() can fail and return ''
-
-2003/08/11  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Search for files to restore.
-	Fix looping signal_connect in catalog restore.
-	GUI fixes - Fabrice FACORAT.
-
-2003/08/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2003/08/10  Pixel  <pixel at mandrakesoft.com>
-
-	* install_any.pm, install_steps_interactive.pm, standalone/adduserdrake,
-	any.pm: use $::prefix instead of passing $prefix to functions
-
-	* install_steps.pm: use $::prefix instead of passing $prefix to functions
-	since we wrote the password in /etc/passwd, we must convert to shadow
-
-	* interactive/gtk.pm, diskdrake/hd_gtk.pm: use
-	Gtk2::Button->new_with_label instead of Gtk2::Button->new for some
-	widgets otherwise underscores become underlines (bug #4678)
-
-	* network/netconnect.pm: perl_checker compliance
-	replace "Press \"Forward\" to continue" with "Press \"%s\" to continue"
-	(bug #4564)
-
-2003/08/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/po/fa.po: updated Farsi file
-
-2003/08/08  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: add gtkset_alignment
-
-2003/08/08  keld
-
-	* share/po/da.po: Updates
-	soft/control-center/po/da.po soft/ftw/po/da.po
-	soft/mdkhtmlbrowser/po/da.po soft/rpmdrake/po/da.po
-	soft/urpmi/po/da.po soft/userdrake2/po/da.po
-	gi/perl-install/share/po/da.po
-
-2003/08/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/zh_TW.po, share/po/eo.po, share/po/eu.po,
-	share/po/zh_CN.po, share/po/vi.po, share/po/be.po, share/po/pl.po,
-	share/po/tr.po, share/po/ca.po, share/po/uk.po, share/po/it.po,
-	share/po/is.po, share/po/th.po, share/po/mt.po, share/po/id.po,
-	share/po/fi.po, share/po/el.po, share/po/wa.po, share/po/lt.po,
-	share/po/ar.po, share/po/bg.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/nl.po, share/po/pt.po, share/po/fa.po, share/po/sl.po,
-	share/po/de.po, share/po/uz@Cyrl.po, share/po/ja.po,
-	share/po/sr@Latn.po, share/po/he.po, share/po/hr.po, share/po/gl.po,
-	share/po/nb.po, share/po/da.po, share/po/fr.po, share/po/cs.po,
-	share/po/bs.po, share/po/sk.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/hu.po, share/po/ga.po, share/po/tg.po, share/po/ta.po,
-	share/po/sr.po, share/po/ko.po, share/po/ro.po, share/po/es.po,
-	share/po/uz.po, share/po/az.po, share/po/af.po, share/po/lv.po: updated
-	pot file
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/sq.po: updated Albanian file
-	updated pot file
-
-2003/08/07  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sv.po: updated Hebrew and Swedish files
-
-	* share/po/de.po: Small fix (too long string)
-
-	* share/po/he.po: updated Hebrew file
-	updated Hebrew and Swedish files
-
-2003/08/07  Pixel  <pixel at mandrakesoft.com>
-
-	* drakxtools.spec: 
-	  - drakxservices: xinetd services have a special treatment
-	  - localedrake: fix the "zh_TW with country China" case
-	  - no more stock icons
-
-2003/08/07  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix removed users code (thanks gc).  Enable
-	.backupignore.
-	Clean up spastic progress bar. Add more info in "View Config"
-	Deal with users that are deleted from the system [Bug 4541].
-
-2003/08/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sv.po, share/po/he.po: updated Hebrew and Swedish files
-
-2003/08/06  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Update (partially)
-
-2003/08/06  David Baudens  <baudens at mandrakesoft.com>
-
-	* standalone/drakfloppy: Use capital letter when needed
-
-2003/08/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2003/08/06  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: try to restore the MBR using "lilo -u" for users not liking the
-	default
-	bootloader automatic configuration (eg: bug #4415)
-
-	* services.pm: in drakxservices, display differently services handled by
-	xinetd (bug #4516)
-	create services_raw() which returns all the info out of "chkconfig
-	--list"
-	perl_checker compliance
-
-2003/08/05  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install2.pm: added discovery and download meta_class facility in VERSION
-	file.
-
-	* pkgs.pm: checking transaction allow ordering them ;-)
-	make default size of transaction to 13 (?) and avoid rpm ordering which
-	seems
-	nasty at present (missing configuration read ?).
-
-2003/08/05  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* lang.pm: ghanese ppl don't talk french!?
-
-2003/08/05  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: Turkish "F" keyboard was unavailable due to a typo
-
-	* share/po/sk.po, share/po/it.po: updated Italian file
-
-2003/08/05  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: do not invert Ok/Cancel for mdk 9.2 (per IHM team request)
-	remove stock icons (per IHM team request)
-
-	* any.pm: fix an old typo
-
-	* standalone/drakbackup, standalone/drakfloppy, standalone/logdrake,
-	diskdrake/hd_gtk.pm, standalone/harddrake2, standalone/drakgw,
-	standalone/drakperm, standalone/draksec,
-	Xconfig/resolution_and_depth.pm, standalone/mousedrake, Xconfig/main.pm,
-	interactive/gtk.pm, standalone/drakboot, standalone/net_monitor,
-	services.pm, standalone/drakbug, standalone/drakfont,
-	standalone/drakconnect: remove stock icons (per IHM team request)
-
-	* lang.pm: 
-	  - fix system_locales_to_ourlocale() returning { lang => 'zh' } for
-	$locale_lang == 'zn_CN.UTF8'
-	  - in standard_locale, return zh_TW instead of zh_CN for lang=zh_TW
-	country=CN
-	  - cleanup standard_locale
-
-	* install_any.pm: add flag UTF8 for rpmsrate
-
-2003/08/05  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* pkgs.pm: checking transaction allow ordering them ;-)
-	make default size of transaction to 13 (?) and avoid rpm ordering which
-	seems
-	nasty at present (missing configuration read ?).
-	fixed ordering of packages.
-	fixed otherOnly for package selection not correctly updated (according
-	to
-	changes in perl-URPM).
-
-	* install2.pm: added discovery and download meta_class facility in VERSION
-	file.
-
-2003/08/05  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* drakxtools.spec: commit titi's requested typos changes
-
-	* ftp.pm: revert my bad change
-
-2003/08/05  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: do not invert Ok/Cancel for mdk 9.2 (per IHM team request)
-	remove stock icons (per IHM team request)
-
-	* interactive/gtk.pm, standalone/mousedrake, standalone/drakconnect,
-	standalone/draksec, standalone/drakperm, diskdrake/hd_gtk.pm,
-	standalone/net_monitor, standalone/drakbackup, standalone/harddrake2,
-	standalone/drakgw, standalone/drakbug, standalone/drakboot,
-	Xconfig/resolution_and_depth.pm, Xconfig/main.pm, standalone/logdrake,
-	standalone/drakfloppy, services.pm, standalone/drakfont: remove stock
-	icons (per IHM team request)
-
-2003/08/05  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* drakxtools.spec: commit titi's requested typos changes
-
-2003/08/05  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* drakxtools.spec: commit titi's requested typos changes
-
-2003/08/04  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/08/04  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* pkgs.pm: added log.
-	updated with newer perl-URPM
-
-2003/08/04  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ftp.pm: don't have two / in the urpmi url or it seems it causes problems
-	for some people (some ftp servers? wget/curl? proxy? no s�..)
-
-	* drakxtools.spec: 9.2-0.27mdk
-
-	* ugtk2.pm: fix not possible to select with mouse anymore (rpmdrake etc)
-	revert "use checkboxes instead of icons"
-
-2003/08/04  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sq.po, share/po/mt.po, share/po/sr@Latn.po,
-	share/po/nb.po, share/po/hr.po, share/po/be.po, share/po/sv.po,
-	share/po/vi.po, share/po/fi.po, share/po/ru.po, share/po/eo.po,
-	share/po/sl.po, share/po/el.po, share/po/bg.po, share/po/gl.po,
-	share/po/DrakX.pot, share/po/az.po, share/po/bs.po, share/po/eu.po,
-	share/po/pt.po, share/po/zh_TW.po, share/po/tr.po, share/po/sk.po,
-	share/po/ar.po, share/po/it.po, share/po/af.po, share/po/ga.po,
-	share/po/da.po, share/po/ta.po, share/po/lt.po, share/po/id.po,
-	share/po/ko.po, share/po/cy.po, share/po/is.po, share/po/tg.po,
-	share/po/fa.po, share/po/uz@Cyrl.po, share/po/pt_BR.po, share/po/pl.po,
-	share/po/nl.po, share/po/lv.po, share/po/cs.po, share/po/th.po,
-	share/po/ca.po, share/po/ro.po, share/po/ja.po, share/po/zh_CN.po,
-	share/po/es.po, share/po/uz.po, share/po/hu.po, share/po/wa.po,
-	share/po/fr.po, share/po/de.po: updated pot file
-
-	* share/po/he.po: updated Hebrew file
-	updated pot file
-
-	* share/po/et.po: updated Estonian file
-	updated pot file
-
-	* share/po/uk.po: updated Ukrainian file
-	updated pot file
-
-	* keyboard.pm: removed bad keyboard from list for Swedish;
-
-	* lang.pm: removed 'xh_ZA' in double in @locales
-	updated list of available locales
-
-2003/08/04  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: fix ask_window_manager_to_logout for gnome
-
-	* ugtk2.pm: don't export destroy_window(), this function doesn't exist!
-	(thanks to perl_checker)
-	perl_checker compliance
-	disable selecting text and popping the contextual menu
-	(GUI team says it's *horrible* to be able to do select text!)
-
-	* drakxtools.spec: gc: commit pixel's 9.2-0.26mdk changelog diff (pixel
-	sux)
-
-2003/08/04  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/08/04  Warly  <warly at mandrakesoft.com>
-
-	* share/logo-mandrake.png: Add new cooker logo for installation
-
-2003/08/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/fa.po: Added Farsi file
-
-2003/08/03  Pixel  <pixel at mandrakesoft.com>
-
-	* bootloader.pm: don't overwrite $o->{bootloader}{method} (much nicer for
-	auto_installs)
-
-	* install_steps_interactive.pm: more complete name for the setRootPassword
-	step: "Set root password and
-	network authentication methods" instead of simply "Set root password"
-
-	* interactive/gtk.pm: OptionMenus do not have an horizontal scroll-bar.
-	This can cause havoc for
-	long strings. So use combo box as we used to do in those cases
-	(eg: diskdrake Create dialog box in expert mode) (bug #4484)
-
-	* rescue/make_rescue_img: fix /sbin/insmod /sbin/rmmod and /sbin/lsmod
-	which were dead symlinks
-	(to /etc/alternatives/something)
-
-	* rescue/guessmounts: 
-	  - copy /etc/mtab to /mnt/etc/mtab to have a nice chrooted "mount" or
-	"df"
-	  - some perl_checker compliance
-
-2003/08/03  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Tool tips.
-
-2003/08/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2003/08/01  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm, install_steps.pm, network/smb.pm,
-	install_steps_interactive.pm: 
-	  - move write_smb_conf() from install_any to network::smb
-	  - rename setAuthentication() to set_authentication()
-	  - move the work of set_authentication() from install_any to any
-	  - move the per-authentification kind questions from
-	install_steps_interactive::setRootPassword() to
-	any::ask_authentification_parameters()
-	  - various cleanup in code prompting authentification questions
-	  - call install_any::set_authentication() in
-	install_steps::setRootPassword()
-	instead of waiting for the installPackages step to be done
-	  (since setRootPassword occurs *after* packages installation)
-	  - don't call set_authentification() in install_steps::addUser()
-	  (why was this done there??)
-	=> these changes will allow drakauth
-
-	* drakxtools.spec: re-adding with -kb
-	add drakauth
-
-	* Xconfig/xfreeX.pm, Xconfig/parse.pm, Xconfig/xfree4.pm,
-	Xconfig/xfree3.pm: => do as Chris Picton suggested
-	Chris Picton said (nearly one year ago :-/) :
-	I have found the need for many low res screen resolutions for such
-	thingas as movie playing, xmame, etc.
-	
-	The method XFdrake uses to enable modes is to enumerate each mode in the
-	XF86Config file. For example (a newly created file):
-	
-	Subsection "Display"
-	    Depth 24
-	    Modes "1280x960" "1152x864" "1024x768" "800x600" "640x480"
-	EndSubsection
-	
-	It would be better (at least under XFree 4, which automatically provides
-	resoltions from the monitor, if it is capable), to not limit the modes
-	provided to the user
-	
-	If I use instead, the following:
-	
-	Subsection "Display"
-	    Depth 24
-	    Virtual 1280 960
-	EndSubsection
-	
-	My maximum mode is exactly the same as before, but I have many more low
-	resolution modes.
-
-	* any.pm, install_any.pm: 
-	  - move write_smb_conf() from install_any to network::smb
-	  - rename setAuthentication() to set_authentication()
-	  - move the work of set_authentication() from install_any to any
-	  - move the per-authentification kind questions from
-	install_steps_interactive::setRootPassword() to
-	any::ask_authentification_parameters()
-	  - various cleanup in code prompting authentification questions
-	  - call install_any::set_authentication() in
-	install_steps::setRootPassword()
-	instead of waiting for the installPackages step to be done
-	  (since setRootPassword occurs *after* packages installation)
-	  - don't call set_authentification() in install_steps::addUser()
-	  (why was this done there??)
-	=> these changes will allow drakauth
-	use $::prefix
-
-	* standalone/drakauth, Makefile.config: add drakauth
-
-	* pixmaps/langs/lang-ku.png, pixmaps/langs/lang-uz@Cyrl.png,
-	pixmaps/langs/lang-gu.png, pixmaps/langs/lang-zu.png,
-	pixmaps/langs/lang-sr@Latn.png, pixmaps/langs/lang-ne.png,
-	pixmaps/langs/lang-se.png, pixmaps/langs/lang-xh.png,
-	pixmaps/langs/lang-as.png, pixmaps/langs/lang-st.png,
-	pixmaps/langs/lang-li.png, pixmaps/langs/lang-ss.png,
-	pixmaps/langs/lang-ve.png, pixmaps/langs/lang-ml.png: re-adding with -kb
-	removing for re-adding with -kb
-
-2003/08/01  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: Add gnome calculator and charmap
-
-2003/08/01  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_CN.po: updated Chinese file
-
-	* lang.pm: Added some more languages to the list;
-	defined kde fonts for some languages
-
-	* pixmaps/langs/lang-zu.png, pixmaps/langs/lang-te.png,
-	pixmaps/langs/lang-mr.png, pixmaps/langs/lang-uz@Cyrl.png,
-	pixmaps/langs/lang-ss.png, pixmaps/langs/lang-xh.png,
-	pixmaps/langs/lang-sr@Latn.png, pixmaps/langs/lang-se.png,
-	pixmaps/langs/lang-ku.png, pixmaps/langs/lang-ml.png,
-	pixmaps/langs/lang-ne.png, pixmaps/langs/lang-as.png,
-	pixmaps/langs/lang-li.png, pixmaps/langs/lang-st.png,
-	pixmaps/langs/lang-ve.png, pixmaps/langs/lang-gu.png,
-	pixmaps/langs/lang-uz.png: New/updated images with language names
-
-	* share/po/et.po: updated po file
-
-	* share/rpmsrate: Added locale->fonts-* dependencies
-
-2003/08/01  Pixel  <pixel at mandrakesoft.com>
-
-	* .perl_checker: printer::printerdrake is not perl_checker compliant,
-	don't pretend it is!
-
-	* standalone/draksec: perl_checker compliance
-
-	* Makefile: s/head -1/head -n 1/
-	(am i the only one who thinks changing head's usage is really stupid?
-	well...)
-
-	* diskdrake/smbnfs_gtk.pm: instead of removing the "Search servers" button
-	when the search is over, keep
-	it to allow searching for new servers (the label is changed from "Search
-	servers" to "Search new servers") (bug #4297)
-
-	* install_any.pm, any.pm: 
-	  - move write_smb_conf() from install_any to network::smb
-	  - rename setAuthentication() to set_authentication()
-	  - move the work of set_authentication() from install_any to any
-	  - move the per-authentification kind questions from
-	install_steps_interactive::setRootPassword() to
-	any::ask_authentification_parameters()
-	  - various cleanup in code prompting authentification questions
-	  - call install_any::set_authentication() in
-	install_steps::setRootPassword()
-	instead of waiting for the installPackages step to be done
-	  (since setRootPassword occurs *after* packages installation)
-	  - don't call set_authentification() in install_steps::addUser()
-	  (why was this done there??)
-	=> these changes will allow drakauth
-	use $::prefix
-
-	* interactive/gtk.pm: don't warn when label is used with no text for boot
-	entries
-	(i want titi's explaination on this first)
-
-	* Xconfig/card.pm: Intel drivers don't need DontVTSwitch anymore (dixit
-	Arnaud de Lorbeau)
-
-	* drakxtools.spec, standalone/drakauth, Makefile.config: add drakauth
-
-	* install_steps_interactive.pm, install2.pm, install_steps.pm,
-	network/smb.pm: 
-	  - move write_smb_conf() from install_any to network::smb
-	  - rename setAuthentication() to set_authentication()
-	  - move the work of set_authentication() from install_any to any
-	  - move the per-authentification kind questions from
-	install_steps_interactive::setRootPassword() to
-	any::ask_authentification_parameters()
-	  - various cleanup in code prompting authentification questions
-	  - call install_any::set_authentication() in
-	install_steps::setRootPassword()
-	instead of waiting for the installPackages step to be done
-	  (since setRootPassword occurs *after* packages installation)
-	  - don't call set_authentification() in install_steps::addUser()
-	  (why was this done there??)
-	=> these changes will allow drakauth
-
-	* ugtk2.pm: replace signal_disconnect with signal_handler_disconnect
-	(needed for perl-gtk2-xs)
-
-	* Xconfig/xfree4.pm, Xconfig/xfree3.pm, Xconfig/xfreeX.pm,
-	Xconfig/parse.pm: => do as Chris Picton suggested
-	Chris Picton said (nearly one year ago :-/) :
-	I have found the need for many low res screen resolutions for such
-	thingas as movie playing, xmame, etc.
-	
-	The method XFdrake uses to enable modes is to enumerate each mode in the
-	XF86Config file. For example (a newly created file):
-	
-	Subsection "Display"
-	    Depth 24
-	    Modes "1280x960" "1152x864" "1024x768" "800x600" "640x480"
-	EndSubsection
-	
-	It would be better (at least under XFree 4, which automatically provides
-	resoltions from the monitor, if it is capable), to not limit the modes
-	provided to the user
-	
-	If I use instead, the following:
-	
-	Subsection "Display"
-	    Depth 24
-	    Virtual 1280 960
-	EndSubsection
-	
-	My maximum mode is exactly the same as before, but I have many more low
-	resolution modes.
-
-2003/07/31  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* rescue/tree/etc/oem: make oem-all by default (obsoleted previous oem)
-
-	* install_steps.pm: added redo of initrd files for oem changes to take
-	effects for bootsplash...
-	fixed /usr/share/bootsplash directory not created for images.
-	apply oem image modification to bootsplash too.
-
-2003/07/31  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sv.po: updated pot file
-	updated Swedish file
-
-	* share/po/ru.po, share/po/et.po, share/po/cy.po, share/po/ca.po,
-	share/po/ja.po, share/po/tg.po, share/po/pt_BR.po, share/po/ar.po,
-	share/po/lt.po, share/po/id.po, share/po/eo.po, share/po/be.po,
-	share/po/af.po, share/po/sq.po, share/po/he.po, share/po/az.po,
-	share/po/ta.po, share/po/uk.po, share/po/sk.po, share/po/it.po,
-	share/po/ro.po, share/po/pt.po, share/po/es.po, share/po/ko.po,
-	share/po/bs.po, share/po/sr@Latn.po, share/po/lv.po, share/po/bg.po,
-	share/po/DrakX.pot, share/po/sr.po, share/po/el.po, share/po/nb.po,
-	share/po/zh_TW.po, share/po/sl.po, share/po/th.po, share/po/hu.po,
-	share/po/cs.po, share/po/ga.po, share/po/is.po, share/po/uz@Cyrl.po,
-	share/po/gl.po, share/po/pl.po, share/po/fr.po, share/po/eu.po,
-	share/po/de.po, share/po/da.po, share/po/tr.po, share/po/nl.po,
-	share/po/vi.po, share/po/wa.po, share/po/hr.po, share/po/zh_CN.po,
-	share/po/fi.po, share/po/mt.po, share/po/uz.po: updated pot file
-
-2003/07/31  Pixel  <pixel at mandrakesoft.com>
-
-	* drakxtools.spec: 
-	  - drakxtools-newt must not require perl(interactive::gtk) or
-	perl(ugtk2)
-	  - only drakbackup require perl(Net::FTP) & perl(Time::localtime), i
-	don't want
-	this require for all drakxtools. What about moving drakbackup to a
-	separate
-	package?
-
-	* bootloader.pm: use "splash=silent" instead of "quiet".
-	kernel messages will still be written, but will be hidden (can be seen
-	if
-	pressing F2 or escape at boot time)
-
-2003/07/31  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: UI issues from cooker list.  Push help off to
-	drakhelp.
-
-2003/07/30  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/07/30  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* interactive/gtk.pm: removed ugly code for scrollbars as pixel has fixed
-	it now.
-
-	* ugtk2.pm: intermediate commit to completely broken ugtk2 for handling
-	tree, in order for
-	gc or pixel to fix this...
-
-	* pkgs.pm: allow testing locally, should not avoid pkgs to work in real
-	place.
-
-	* install_steps_interactive.pm: removed remaining code of eval (eq nop).
-	remove eval around choosePackagesTree as it display something even if it
-	doesn't run...
-
-2003/07/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cs.po, share/po/he.po, share/po/sq.po: updated Albanian, Czech
-	and Hebrew files
-
-2003/07/30  Pixel  <pixel at mandrakesoft.com>
-
-	* network/network.pm: revert to 1.129:
-	it's no good removing " (using module ...)" from {DEVICE} field, it's
-	much
-	  better not having it in the first place. See network/ethernet.pm v1.81
-	for
-	  the real fix
-
-	* install_steps.pm: Aurora doesn't exist anymore (and it's been that way
-	for quite a few time)
-
-	* network/ethernet.pm: fix typo (thanks to perl_checker)
-	cleanup (especially ensure $interface is not something like "eth0 (using
-	module ...)" but only "eth0" (cf network/network.pm 1.130 nasty change)
-
-	* timezone.pm: 
-	  - cleanup
-	  - add pool.ntp.org (and make it the default) (cf bug #4197)
-
-	* install_steps_gtk.pm: ensure "No details" is displayed instead of
-	"Details" when beginning a new
-	package installation round and "No details" was pressed in previous
-	round
-
-	* any.pm: perl_checker compliance
-	  - cleanup debug code
-	  - use read_gnomekderc & update_gnomekderc instead of getVarsFromSh &
-	substInFile
-	allow other=/dev/fd0 (bug #4405)
-
-	* Xconfig/test.pm: 
-	  - move from perl-GTK2 to perl-Gtk2
-	  - fix an old weird typo
-
-	* install_steps_interactive.pm: fix typo
-	  - cleanup
-	  - add pool.ntp.org (and make it the default) (cf bug #4197)
-
-2003/07/29  Frederic Crozat  <fcrozat at mandrakesoft.com>
-
-	* share/rpmsrate: Add vera font by default
-
-2003/07/29  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/wa.po, share/po/da.po, share/po/zh_CN.po,
-	share/po/uz@Cyrl.po, share/po/sk.po, share/po/uz.po: updated pot file
-
-2003/07/29  Pixel  <pixel at mandrakesoft.com>
-
-	* docs/README: remove some really obsolete doc
-
-	* fsedit.pm: re-export %fsedit::suggestions as needed (why did titi my-ed
-	it?) (fixes bug #4298)
-
-	* install2.pm: use formatError for the error message occuring when
-	auto_install.cfg is bad
-
-	* drakxtools.spec: there is no good url for drakxtools, but at least don't
-	give a broken one!
-	(thanks to Raul Dias)
-
-	* ugtk2.pm: labels are not able to correctly handle long texts, so
-	rollback to using
-	TextView instead.
-	For information on this pb:
-	  - IHM team doesn't like TextView because the text can be selected, and
-	a
-	contextual menu is available
-	  - IHM team doesn't like the difference between small text (using a
-	Label) and
-	longer text (using a TextView)
-	  - Label can wrap automatically but not nicely (it doesn't use the full
-	width)
-	  - Label can't wrap CJK text which have no spaces
-	Apart from this Label vs TextView pb, Titi only left some code which
-	takes
-	care of small text, causing the text to be wrapped using warp_text
-	(which is
-	not proportional font aware) and not using a scrolled window (causing
-	the
-	license to take more than the screen, the buttons disappearing at the
-	bottom
-	of the screen)
-
-2003/07/28  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* share/list.i386: moved mkfs.xfs
-
-	* rescue/list.i386: moved xfs files.
-
-	* rescue/list.ia64: moved xfs files (problably the same for ia64 ?).
-
-	* interactive/gtk.pm: make sure the split of message is done only in
-	install mode, as standalone has
-	no problem.
-
-2003/07/28  Pixel  <pixel at mandrakesoft.com>
-
-	* tools/ddcprobe/Makefile: we now need -lm to link
-
-2003/07/28  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/07/26  keld
-
-	* share/po/da.po: small update
-	gi/perl-install/share/po/da.po
-	update!
-	soft/menudrake/po/da.po gi/perl-install/share/po/da.po
-	update
-	gi/perl-install/share/po/da.po
-
-2003/07/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po, share/po/uk.po: updated Japanese and Ukrainian files
-
-2003/07/25  aginies
-
-	* pixmaps/drakcluster.png: new icon, without alpha-layer (unsupported
-	under 9.0)
-
-2003/07/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: Updated Estonian file
-	updated pot file
-
-	* share/po/ru.po, share/po/cy.po, share/po/ca.po, share/po/ja.po,
-	share/po/tg.po, share/po/pt_BR.po, share/po/ar.po, share/po/lt.po,
-	share/po/id.po, share/po/eo.po, share/po/be.po, share/po/af.po,
-	share/po/sq.po, share/po/he.po, share/po/az.po, share/po/ta.po,
-	share/po/uk.po, share/po/sk.po, share/po/it.po, share/po/ro.po,
-	share/po/pt.po, share/po/es.po, share/po/ko.po, share/po/bs.po,
-	share/po/sr@Latn.po, share/po/lv.po, share/po/bg.po, share/po/DrakX.pot,
-	share/po/sr.po, share/po/el.po, share/po/nb.po, share/po/zh_TW.po,
-	share/po/sv.po, share/po/sl.po, share/po/th.po, share/po/hu.po,
-	share/po/cs.po, share/po/ga.po, share/po/is.po, share/po/uz@Cyrl.po,
-	share/po/gl.po, share/po/pl.po, share/po/fr.po, share/po/eu.po,
-	share/po/de.po, share/po/da.po, share/po/tr.po, share/po/nl.po,
-	share/po/vi.po, share/po/wa.po, share/po/hr.po, share/po/zh_CN.po,
-	share/po/fi.po, share/po/mt.po, share/po/uz.po: updated pot file
-
-2003/07/25  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-0.24mdk
-	9.2-0.24mdk: work in progress
-
-	* ugtk2.pm: work in progress (follow interface team recommendation) : use
-	checkboxes instead of ugly icon
-	inconsistent (aka semi-selected) state still need working
-	install caller must be fixed like rpmdrake is
-
-	* standalone/drakbug: use std button layout
-	use option menus instead of combos in on interface team request
-
-	* standalone/drakperm: fix crash on adding new permission
-
-2003/07/24  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Update
-
-2003/07/24  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* share/rpmsrate: removed ncompress (contrib)
-
-2003/07/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakboot: hide splash screen section for now on ihm team
-	request
-
-	* standalone/net_monitor: 
-	  - use option menus instead of combos
-	  - fix crash on profile change due to netconnect api change
-
-	* harddrake/sound.pm: fix #4258
-
-	* standalone/logdrake: upcase label
-
-	* security/l10n.pm: describe
-
-	* security/help.pm: better help
-	  - filter dumb characters
-	  - strip help from internal msec doc so that it better fit end user
-
-	* share/po/fr.po: update
-	one more typo (still fabrice)
-	typo fix (spoted by Fabrice Facorat)
-	follow english case
-
-	* interactive/gtk.pm: if the callee explicitely want to force the user to
-	pick sg from a
-	fixed set of options, the right widget to use is an OptionMenu rather
-	than a Combo (see ugtk2 r1.141 log and ugtk2::Gtk2::OptionMenu
-	sub-module)
-
-	* standalone/drakperm: since we've replace save "button" by "ok", exit the
-	tool after saving the preferences
-	fix tree filling
-	  - ugtk2-ize dialog construction
-	  - fix tip setting
-	localize level option menu
-	settings dialog:
-	  - localize all fields
-	  - add tips for all check boxes
-	use stock icons on rule toolbar
-	make label be undserstandable
-	upcase various widget texts (still have to localize settings dialog
-	fields though)
-	simplify (un|)sensitive property setting of the list
-	use option menus instead of combos in settings dialog too
-	use stock icons and std button layout in settings dialog
-	use option menus instead of combos
-
-	* drakxtools.spec: bump perl-Gtk2 requires in order to fix drakfont bug
-	with utf8 file
-	names
-	9.2-0.23mdk
-	draksec: requires a non broken msec
-	9.2-0.22mdk
-
-	* standalone/mousedrake: use std button layout
-
-	* standalone/draksec: restore help for msec checks
-
-	* standalone/drakconnect: remove nonsense expert button
-	  - (configure_lan) directly use global variables
-	  - double click on ethernet lines run lan config dialog
-
-2003/07/23  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* standalone/drakhelp: 
-	  - ru, de and it have no specific drakxtools help packages. Default to
-	english
-	  - retest $$path to see if the page exists.
-	  - don't launch browser unless help page exists.
-
-2003/07/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/he.po: fixed "arrows"
-
-	* share/po/uz@Cyrl.po, share/po/uz.po: Added Uzbek cyrillic file
-
-2003/07/23  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix catalog restore for perl-Gtk2
-	Fix rsync behavior - broken in perl_checker fixes
-	Fix wildcard_to_tarfile
-
-2003/07/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* any.pm: new autologin scheme (spec87): directly configure display
-	manager
-
-	* drakxtools.spec: log drakfont fixes
-	9.2-0.21mdk
-
-	* standalone/drakboot: we do not need anymore autologin (spec87)
-
-	* standalone/drakfont: fix #1679 & #3673
-
-2003/07/22  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/07/22  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_gtk.pm: fixed titi sucks (as usually as he never tests nor
-	checks what he is writing).
-
-	* standalone.pm: avoid being clashed by signature checking when installing
-	packages,
-	need a better fix later.
-
-	* interactive/gtk.pm: tempory fix for title not having scroll bars (which
-	sounds reasonable ?), as the
-	size of the window is fixed the low part of the window is not visible.
-	titi who makes the portage to newer Gtk2 has not tested this (again, for
-	info).
-
-2003/07/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-2003/07/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* share/po/fr.po: last but not least ...
-	more unfuzzy
-	unfuzzy...
-	more french translation
-	better phrasing
-
-	* drakxtools.spec: first bits of 9.2-0.21mdk
-	9.2-0.20mdk
-	9.2-0.20mdk
-
-	* standalone/draksec: N_ON_E is of no use, NONE is
-	simplify and order vertically OptionMenus
-
-	* network/network.pm: fix fpons sucks (as usuall as he neither tests nor
-	care about bug
-	reports)
-
-	* standalone/drakconnect: 
-	  - fix "lan config" dialog where fields were not filled
-	  - factorize some code in order to achieve it
-
-	* standalone/drakgw: disable service start/stop too in testing mode
-	do not install package in testing mode
-	no valid reason not to be able to go back at first step
-	fix going backward in the wizard at deepest stages
-	testing mode: enable to go some steps further when testing this tool
-	fix back step
-
-2003/07/21  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid src package to be seen in tree.
-
-	* pkgs.pm: fixed setSelectedFromCompssList (updated with newer perl-URPM
-	interface),
-	more need to be done. maybe increased speed of unselectAllPackages.
-
-2003/07/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ru.po, share/po/et.po, share/po/cy.po, share/po/ca.po,
-	share/po/ja.po, share/po/tg.po, share/po/pt_BR.po, share/po/ar.po,
-	share/po/lt.po, share/po/id.po, share/po/eo.po, share/po/be.po,
-	share/po/af.po, share/po/sq.po, share/po/he.po, share/po/az.po,
-	share/po/ta.po, share/po/uk.po, share/po/sk.po, share/po/it.po,
-	share/po/ro.po, share/po/pt.po, share/po/es.po, share/po/ko.po,
-	share/po/bs.po, share/po/sr@Latn.po, share/po/lv.po, share/po/bg.po,
-	share/po/DrakX.pot, share/po/sr.po, share/po/el.po, share/po/nb.po,
-	share/po/zh_TW.po, share/po/sv.po, share/po/sl.po, share/po/th.po,
-	share/po/hu.po, share/po/cs.po, share/po/ga.po, share/po/is.po,
-	share/po/gl.po, share/po/pl.po, share/po/fr.po, share/po/eu.po,
-	share/po/de.po, share/po/da.po, share/po/tr.po, share/po/nl.po,
-	share/po/vi.po, share/po/wa.po, share/po/hr.po, share/po/zh_CN.po,
-	share/po/fi.po, share/po/mt.po, share/po/uz.po: updated pot file
-
-2003/07/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: mcc view: add an help button (and ugtk2-ize main
-	window buttons btw)
-
-	* network/netconnect.pm: add a hint if we never restore profiles feature
-	do not gratuitously waste space
-	if we really want the type connection to be translated by translate()
-	call in
-	step_2, we should mark it as translatable for gettext somewhere ...
-	fix final success message:
-	  - fix join usage
-	  - fix gtk frontend detection
-	do not loop if one refuse to save changes, just skip the save step
-	keep user changes on back step
-	fix no previous button when using ask_okcancel() in wizard mode due to
-	*very*
-	ugly "$common->{cancel} = '' if !defined wantarray();" in interactive.pm
-	anyway, the whole pre_func() idea was totally dumb
-	it now looks a little cleaner
-	
-	
-	
-	making all main configuration callbacks having the same prototype and
-	name
-	would enable further cleanups (direct call to
-	network::$net_module{$type}::configure(...);)
-
-	* standalone/harddrake2: add hints for translators
-	workaround buggy gtk+-2.x that do not wrap textviews when realized
-
-	* standalone/diskdrake: provide some help access in standalone mode
-
-	* network/network.pm: dhcp host name cannot be set if one want to get it
-	from dhcp server
-
-	* drakxtools.spec: 9.2-0.19mdk
-
-	* standalone/draksec: add hints for translators
-	make 1st tab title somewhat clearer
-	fix infamous "when embedded draksec can be enlarged but never shrink
-	back"
-	one should not be able to set syadmin when no reports
-	  - describe all security levels
-	  - make it clean than security admin is not a security level
-	  - colorize security levels names
-	  - use a label instead of textview
-
-2003/07/21  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid src package to be seen in tree.
-
-	* pkgs.pm: fixed setSelectedFromCompssList (updated with newer perl-URPM
-	interface),
-	more need to be done. maybe increased speed of unselectAllPackages.
-
-2003/07/21  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid src package to be seen in tree.
-
-	* pkgs.pm: fixed setSelectedFromCompssList (updated with newer perl-URPM
-	interface),
-	more need to be done. maybe increased speed of unselectAllPackages.
-
-2003/07/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/draksec: fix checks loading
-	fix checks setting
-	fix config load
-
-	* drakxtools.spec: 9.2-0.18mdk
-
-	* security/msec.pm: sort functions & checks when writing configuration
-
-2003/07/18  erwan
-
-	* pixmaps/drakcluster.png: new drakcluster icon from LN
-
-2003/07/18  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* Makefile: trying to follow the sucking of titi...
-	use perl-Gtk2 and perl-Glib files.
-
-2003/07/18  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm: new binding returns a list intead of an array ref
-
-	* network/netconnect.pm: sync translation with stock item
-
-	* standalone/draksec: now that we display localized descriptions instead
-	of raw function
-	names, we've to sort the formers instead of sorting the laters
-	fix preferences loading & saving
-
-	* interactive/gtk.pm: only catch real wrong callees
-
-	* drakxtools.spec: add bug ref
-	first 9.2-0.17mdk bits
-
-2003/07/17  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/07/17  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm: do not exit the whole app when one destroy a dialog
-	(_create_dialog) default is "as much as needed" size
-	perl_checker fixes
-	center_always is unuser-friendly
-	  - ihm team said: always use labels, textview are stupid nonsenses
-	  - fcrozat then said: labels have no wrapping problems with cjk and the
-	like
-	use stock items in wizards
-
-	* network/ethernet.pm: proxy configuration step: do not go back two steps
-	back on "previous"
-	click, but only one back
-
-	* standalone/drakconnect: adjust dialogs size
-	correctly align fields in "lan configuration" dialog
-	perl_checker fixes
-	center_always is unuser-friendly
-	fix internet gateway buttons layout
-	remove ugly icon
-
-	* network/network.pm: properly use checkboxes
-
-	* drakxtools.spec: one more bit for 0.16mdk
-	9.2-0.16mdk
-	frop gtk+1 requires
-
-	* network/netconnect.pm: fix usage of bool type in interactive: put the
-	text in the checkbox's
-	label instead of packing a standalone label *and* a checkbox with an
-	empty label
-
-	* interactive/gtk.pm: perl_checker fix
-	simplify with gtkshow()
-	intercept buggy callees/users of bool type that wrongly pass label
-	instead of text
-
-2003/07/16  aginies
-
-	* fsedit.pm: now swap is before / on client node
-
-2003/07/16  Pixel  <pixel at mandrakesoft.com>
-
-	* commands.pm, swap.pm, Makefile: remove mkswap from commands.pm, so no
-	need anymore to have mkswap_ (the drawback is that the mkswap command
-	won't create the device anymore)
-
-2003/06/06  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/Makefile: we're in cooker now
-
-	* share/logo-mandrake.png: cooker
-
-2003/06/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* help.pm: "Country" -> "Country" . " / Region" in a few places still
-	missing that change
-
-2003/06/06  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: stricter regexp when looking /dev/xxx otherwise it is used also
-	for nfs names
-	and causes havoc
-
-	* standalone/fileshareset: fileshareset doesn't use MDK::Common
-
-	* any.pm: perl_checker compliance
-
-	* fsedit.pm: fix computeSize which took into account suggested partitions
-	on another drives
-	(which is especially bad for LVMs)
-
-	* network/nfs.pm: 
-	  - handle spaces in exported directories
-	  - simplify using --no-headers when calling showmount
-
-	* common.pm, ugtk2.pm: ensure N() is not called before ugtk2 is
-	initialised, otherwise
-	the gettext is not forced to utf8
-
-	* diskdrake/interactive.pm: fix typos + perl_checker fixes
-
-	* standalone.pm: don't use N() so early
-	(beware, this removes translation, some translate() calls must be
-	added!)
-
-2003/06/05  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* Makefile: fix install crashed X server because /usr/bin/true was no more
-	available :/
-
-2003/06/05  Pixel  <pixel at mandrakesoft.com>
-
-	* mdk-stage1/Makefile.common: fix build with new gcc
-
-	* fs.pm: make perl_checker a happy bot
-	don't use description of fstab options from manpage mount(8), inline
-	them in the source
-
-2003/06/05  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Bug 3647 - Chinese translations.  More
-	perl_checker fixes.
-
-2003/06/05  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/v4l.pm: support more tuners and tv cards
-
-2003/06/04  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* rescue/list: updated with rpm 4.2.
-
-	* tools/updatehdlist: update only RPMS1 and RPMS2 to keep other package in
-	RPMS3.
-
-	* tools/syncrpms: avoid updating kernel-BOOT (as kernel-BOOT of cooker is
-	pure shit).
-
-	* install_steps_gtk.pm: allow X server to use :9 (:1 seems to not working
-	?) and disable access control
-	(no clients can connect by default).
-
-	* pkgs.pm: updated for newer perl-URPM (0.90 series).
-
-2003/06/04  gbeauchesne
-
-	* mdk-stage1/dietlibc/include/termio.h,
-	mdk-stage1/dietlibc/i386/sendmsg.S, mdk-stage1/dietlibc/i386/asin.S,
-	mdk-stage1/dietlibc/libpthread/pthread_flockfile.c,
-	mdk-stage1/dietlibc/ia64/__longjmp.S, mdk-stage1/dietlibc/i386/strcmp.S,
-	mdk-stage1/dietlibc/libcruft/scan_ulong.c,
-	mdk-stage1/dietlibc/libdl/_dl_relocate.c,
-	mdk-stage1/dietlibc/i386/stpcpy.S, mdk-stage1/dietlibc/i386/ltostr.S,
-	mdk-stage1/dietlibc/libugly/utent.c, mdk-stage1/dietlibc/i386/connect.S,
-	mdk-stage1/dietlibc/i386/atan2.S,
-	mdk-stage1/dietlibc/syscalls.s/mlock.S,
-	mdk-stage1/dietlibc/ppc/syscalls.h, mdk-stage1/dietlibc/lib/__ptrace.c,
-	mdk-stage1/dietlibc/libstdio/scanf.c, mdk-stage1/dietlibc/i386/memcmp.S,
-	mdk-stage1/dietlibc/include/stdarg-cruft.h,
-	mdk-stage1/dietlibc/i386/fmod.S, mdk-stage1/dietlibc/i386/strrchr.S,
-	mdk-stage1/dietlibc/libcruft/bzero.c,
-	mdk-stage1/dietlibc/syscalls.s/sendfile64.S,
-	mdk-stage1/dietlibc/libugly/iconv.c,
-	mdk-stage1/dietlibc/libugly/getprotobyname.c,
-	mdk-stage1/dietlibc/include/asm/types.h,
-	mdk-stage1/dietlibc/i386/accept.S,
-	mdk-stage1/dietlibc/include/sys/fsuid.h,
-	mdk-stage1/dietlibc/syscalls.s/ftruncate64.S,
-	mdk-stage1/dietlibc/x86_64/socket.S,
-	mdk-stage1/dietlibc/libcruft/gethostbyaddr2_r.c,
-	mdk-stage1/dietlibc/lib/llabs.c, mdk-stage1/dietlibc/i386/memccpy.S,
-	mdk-stage1/dietlibc/libugly/getservbyname.c,
-	mdk-stage1/dietlibc/include/write12.h, mdk-stage1/dietlibc/i386/bind.S,
-	mdk-stage1/dietlibc/x86_64/listen.S,
-	mdk-stage1/dietlibc/alpha/errlist.S,
-	mdk-stage1/dietlibc/libcruft/setlocale.c,
-	mdk-stage1/dietlibc/x86_64/msgctl.S,
-	mdk-stage1/dietlibc/syscalls.s/setfsuid.S,
-	mdk-stage1/dietlibc/lib/tcflow.c,
-	mdk-stage1/dietlibc/syscalls.s/geteuid32.S,
-	mdk-stage1/dietlibc/libcruft/scandir.c,
-	mdk-stage1/dietlibc/syscalls.s/getuid32.S,
-	mdk-stage1/dietlibc/include/asm/ia64-sigcontext.h,
-	mdk-stage1/dietlibc/libcruft/getusershell.c,
-	mdk-stage1/dietlibc/i386/floor.S,
-	mdk-stage1/dietlibc/syscalls.s/alarm.S,
-	mdk-stage1/dietlibc/ia64/utime.S, mdk-stage1/dietlibc/x86_64/mmap.S,
-	mdk-stage1/dietlibc/ia64/README, mdk-stage1/dietlibc/libcruft/tmpnam.c,
-	mdk-stage1/dietlibc/libm/acosh.c,
-	mdk-stage1/dietlibc/libcruft/alphasort64.c,
-	mdk-stage1/dietlibc/syscalls.s/fchown32.S,
-	mdk-stage1/dietlibc/libcruft/getopt_long_only.c,
-	mdk-stage1/dietlibc/syscalls.s/munlock.S,
-	mdk-stage1/dietlibc/ppc/clone.S, mdk-stage1/dietlibc/libcruft/pwbuf.c,
-	mdk-stage1/dietlibc/i386/getpeername.S,
-	mdk-stage1/dietlibc/ia64/clone.S, mdk-stage1/dietlibc/x86_64/setjmp.S,
-	mdk-stage1/dietlibc/libpthread/pthread_fgetc.c,
-	mdk-stage1/dietlibc/ia64/listen.S,
-	mdk-stage1/dietlibc/include/net/if_ether.h,
-	mdk-stage1/dietlibc/lib/strtof.c,
-	mdk-stage1/dietlibc/x86_64/Makefile.add,
-	mdk-stage1/dietlibc/lib/errlistu.c,
-	mdk-stage1/dietlibc/libstdio/vfscanf.c,
-	mdk-stage1/dietlibc/syscalls.s/create_module.S,
-	mdk-stage1/dietlibc/alpha/syscalls.h,
-	mdk-stage1/dietlibc/x86_64/unified.S, mdk-stage1/dietlibc/lib/write12.c,
-	mdk-stage1/dietlibc/lib/__stime.c,
-	mdk-stage1/dietlibc/include/netpacket/packet.h,
-	mdk-stage1/dietlibc/i386/poly.S, mdk-stage1/dietlibc/libugly/netent.c,
-	mdk-stage1/dietlibc/ia64/msgrcv.S,
-	mdk-stage1/dietlibc/libcruft/seteuid.c,
-	mdk-stage1/dietlibc/syscalls.s/delete_module.S,
-	mdk-stage1/dietlibc/ia64/pipe.S, mdk-stage1/dietlibc/libcruft/setegid.c,
-	mdk-stage1/dietlibc/libpthread/pthread_getschedparam.c,
-	mdk-stage1/dietlibc/include/linux/nfs.h,
-	mdk-stage1/dietlibc/libugly/gai_strerror.c,
-	mdk-stage1/dietlibc/i386/rint.S,
-	mdk-stage1/dietlibc/include/asm/arm-sigcontext.h,
-	mdk-stage1/dietlibc/lib/ipv6constants.c,
-	mdk-stage1/dietlibc/lib/sigpending.c,
-	mdk-stage1/dietlibc/i386/syscalls.h,
-	mdk-stage1/dietlibc/include/float.h, mdk-stage1/dietlibc/i386/hypot.S,
-	mdk-stage1/dietlibc/i386/cosh.S, mdk-stage1/dietlibc/x86_64/semop.S,
-	mdk-stage1/dietlibc/libugly/strndup.c, mdk-stage1/dietlibc/libm/erf.c,
-	mdk-stage1/dietlibc/lib/memmem.c,
-	mdk-stage1/dietlibc/syscalls.s/setregid32.S,
-	mdk-stage1/dietlibc/libcruft/tempnam.c,
-	mdk-stage1/dietlibc/libcompat/syscall.S,
-	mdk-stage1/dietlibc/x86_64/recvfrom.S,
-	mdk-stage1/dietlibc/lib/strtold.c,
-	mdk-stage1/dietlibc/syscalls.s/setfsgid32.S,
-	mdk-stage1/dietlibc/libcruft/herror.c,
-	mdk-stage1/dietlibc/libcruft/bcopy.c,
-	mdk-stage1/dietlibc/libcruft/__parse_ws.c,
-	mdk-stage1/dietlibc/i386/sendto.S, mdk-stage1/dietlibc/ia64/sendmsg.S,
-	mdk-stage1/dietlibc/i386/sleep.S, mdk-stage1/dietlibc/i386/shutdown.S,
-	mdk-stage1/dietlibc/libugly/getservent.c,
-	mdk-stage1/dietlibc/libugly/putpwent.c, mdk-stage1/dietlibc/libm/sinh.c,
-	mdk-stage1/dietlibc/libcruft/getspent_r.c,
-	mdk-stage1/dietlibc/i386/send.S, mdk-stage1/dietlibc/ia64/msgget.S,
-	mdk-stage1/dietlibc/libcruft/killpg.c,
-	mdk-stage1/dietlibc/x86_64/__testandset.S,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigqueueinfo.S,
-	mdk-stage1/dietlibc/libstdio/fsetpos.c,
-	mdk-stage1/dietlibc/i386/isleap.S, mdk-stage1/dietlibc/i386/PIC.h,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigtimedwait.S,
-	mdk-stage1/dietlibc/lib/tcsendbreak.c,
-	mdk-stage1/dietlibc/x86_64/shmat.S,
-	mdk-stage1/dietlibc/libcruft/dnscruft3.c,
-	mdk-stage1/dietlibc/libugly/difftime.c,
-	mdk-stage1/dietlibc/libstdio/ftello.c,
-	mdk-stage1/dietlibc/x86_64/sendto.S,
-	mdk-stage1/dietlibc/x86_64/syscalls.h, mdk-stage1/dietlibc/ia64/send.S,
-	mdk-stage1/dietlibc/ia64/bind.S, mdk-stage1/dietlibc/x86_64/shmctl.S,
-	mdk-stage1/dietlibc/libcruft/clock.c,
-	mdk-stage1/dietlibc/syscalls.s/settimeofday.S,
-	mdk-stage1/dietlibc/libugly/protoent_buf.c,
-	mdk-stage1/dietlibc/libstdio/fgetpos.c,
-	mdk-stage1/dietlibc/libugly/getprotobynumber_r.c,
-	mdk-stage1/dietlibc/sparc/strlen.S,
-	mdk-stage1/dietlibc/lib/sigprocmask.c,
-	mdk-stage1/dietlibc/ia64/__nice.c,
-	mdk-stage1/dietlibc/syscalls.s/mmap2.S, mdk-stage1/dietlibc/i386/sqrt.S,
-	mdk-stage1/dietlibc/i386/strlen.S, mdk-stage1/dietlibc/ia64/shmget.S,
-	mdk-stage1/dietlibc/x86_64/bind.S,
-	mdk-stage1/dietlibc/syscalls.s/setreuid32.S,
-	mdk-stage1/dietlibc/include/net/ethernet.h,
-	mdk-stage1/dietlibc/include/linux/eventpoll.h,
-	mdk-stage1/dietlibc/syscalls.s/errlist.S,
-	mdk-stage1/dietlibc/i386/getenv.S, mdk-stage1/dietlibc/libm/bessel.c,
-	mdk-stage1/dietlibc/libm/ipow.c, mdk-stage1/dietlibc/libm/atanh.c,
-	mdk-stage1/dietlibc/libstdio/fdglue2.c,
-	mdk-stage1/dietlibc/libcruft/getgrent_r.c,
-	mdk-stage1/dietlibc/i386/strcpy.S,
-	mdk-stage1/dietlibc/include/linux/types.h,
-	mdk-stage1/dietlibc/include/asm/ppc-sigcontext.h,
-	mdk-stage1/dietlibc/libugly/unlockpt.c,
-	mdk-stage1/dietlibc/ia64/unified.S,
-	mdk-stage1/dietlibc/libugly/freeaddrinfo.c,
-	mdk-stage1/dietlibc/libcruft/getpwuid_r.c,
-	mdk-stage1/dietlibc/ia64/semget.S,
-	mdk-stage1/dietlibc/libcruft/hstrerror.c,
-	mdk-stage1/dietlibc/libcruft/grbuf.c,
-	mdk-stage1/dietlibc/sparc/syscalls.h,
-	mdk-stage1/dietlibc/libstdio/fseeko64.c,
-	mdk-stage1/dietlibc/libcruft/getgrnam_r.c,
-	mdk-stage1/dietlibc/i386/log.S, mdk-stage1/dietlibc/lib/sigsuspend.c,
-	mdk-stage1/dietlibc/ia64/getpeername.S,
-	mdk-stage1/dietlibc/i386/strncmp.S,
-	mdk-stage1/dietlibc/syscalls.s/setfsuid32.S,
-	mdk-stage1/dietlibc/syscalls.s/__pwrite.S,
-	mdk-stage1/dietlibc/ia64/shmdt.S, mdk-stage1/dietlibc/libm/rint.c,
-	mdk-stage1/dietlibc/libcruft/mktemp.c,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigsuspend.S,
-	mdk-stage1/dietlibc/libcruft/__end_parse.c,
-	mdk-stage1/dietlibc/syscalls.s/adjtimex.S,
-	mdk-stage1/dietlibc/i386/exp2.S,
-	mdk-stage1/dietlibc/libcruft/alphasort.c,
-	mdk-stage1/dietlibc/libugly/openpty.c,
-	mdk-stage1/dietlibc/profiling/monitor.c,
-	mdk-stage1/dietlibc/ia64/recv.S,
-	mdk-stage1/dietlibc/syscalls.s/getresgid32.S,
-	mdk-stage1/dietlibc/lib/atoll.c,
-	mdk-stage1/dietlibc/libcruft/getopt_long.c,
-	mdk-stage1/dietlibc/ia64/connect.S,
-	mdk-stage1/dietlibc/include/linux/loop.h,
-	mdk-stage1/dietlibc/alpha/sigaction.c,
-	mdk-stage1/dietlibc/libstdio/vfprintf.c,
-	mdk-stage1/dietlibc/libugly/getservent_r.c,
-	mdk-stage1/dietlibc/ia64/recvmsg.S,
-	mdk-stage1/dietlibc/libcruft/mkdtemp.c,
-	mdk-stage1/dietlibc/ia64/Makefile.add,
-	mdk-stage1/dietlibc/libshell/basename.c,
-	mdk-stage1/dietlibc/x86_64/semget.S,
-	mdk-stage1/dietlibc/x86_64/getsockopt.S,
-	mdk-stage1/dietlibc/syscalls.s/fdatasync.S,
-	mdk-stage1/dietlibc/libcruft/spbuf.c,
-	mdk-stage1/dietlibc/syscalls.s/errno.S,
-	mdk-stage1/dietlibc/syscalls.s/setfsgid.S,
-	mdk-stage1/dietlibc/syscalls.s/n_sigpending.S,
-	mdk-stage1/dietlibc/ia64/semop.S, mdk-stage1/dietlibc/lib/sigaction.c,
-	mdk-stage1/dietlibc/libdl/_dl_main.c,
-	mdk-stage1/dietlibc/include/sys/alpha-ioctl.h,
-	mdk-stage1/dietlibc/x86_64/getpeername.S,
-	mdk-stage1/dietlibc/libpthread/pthread_internal.c,
-	mdk-stage1/dietlibc/i386/tan.S, mdk-stage1/dietlibc/lib/__isinf.c,
-	mdk-stage1/dietlibc/i386/strncpy.S,
-	mdk-stage1/dietlibc/lib/__v_printf.c,
-	mdk-stage1/dietlibc/syscalls.s/msync.S,
-	mdk-stage1/dietlibc/syscalls.s/epoll_ctl.S,
-	mdk-stage1/dietlibc/x86_64/clone.S,
-	mdk-stage1/dietlibc/libugly/getservbyport_r.c,
-	mdk-stage1/dietlibc/libcruft/getopt_data.c,
-	mdk-stage1/dietlibc/libcompat/stpcpy.c,
-	mdk-stage1/dietlibc/libcruft/getpwent_r.c,
-	mdk-stage1/dietlibc/include/linux/posix_types.h,
-	mdk-stage1/dietlibc/libstdio/fseeko.c,
-	mdk-stage1/dietlibc/libugly/getnameinfo.c,
-	mdk-stage1/dietlibc/include/dietref.h, mdk-stage1/dietlibc/libm/asinh.c,
-	mdk-stage1/dietlibc/include/pty.h, mdk-stage1/dietlibc/i386/exp.S,
-	mdk-stage1/dietlibc/include/sys/soundcard.h,
-	mdk-stage1/dietlibc/include/sys/klog.h,
-	mdk-stage1/dietlibc/libpthread/pthread_setschedparam.c,
-	mdk-stage1/dietlibc/i386/sqrtl.S,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigaction.S,
-	mdk-stage1/dietlibc/i386/strcasecmp.S,
-	mdk-stage1/dietlibc/syscalls.s/setgid32.S,
-	mdk-stage1/dietlibc/i386/__half.S,
-	mdk-stage1/dietlibc/include/asm/sparc-sigcontext.h,
-	mdk-stage1/dietlibc/profiling/__mcount.c,
-	mdk-stage1/dietlibc/include/sys/arm-ioctl.h,
-	mdk-stage1/dietlibc/libugly/getprotobynumber.c,
-	mdk-stage1/dietlibc/i386/log2.S, mdk-stage1/dietlibc/ia64/mmap.S,
-	mdk-stage1/dietlibc/sparc/errlist.S,
-	mdk-stage1/dietlibc/ia64/__testandset.S,
-	mdk-stage1/dietlibc/include/sys/i386-ioctl.h,
-	mdk-stage1/dietlibc/libcruft/getpwent.c,
-	mdk-stage1/dietlibc/syscalls.s/environ.S,
-	mdk-stage1/dietlibc/libpthread/pthread_errno.c,
-	mdk-stage1/dietlibc/alpha/__alarm.c, mdk-stage1/dietlibc/i386/mmap64.S,
-	mdk-stage1/dietlibc/i386/vfork.S, mdk-stage1/dietlibc/ia64/vfork.S,
-	mdk-stage1/dietlibc/libugly/timezone.c,
-	mdk-stage1/dietlibc/libugly/servent_buf.c,
-	mdk-stage1/dietlibc/x86_64/getsockname.S,
-	mdk-stage1/dietlibc/include/sys/prctl.h,
-	mdk-stage1/dietlibc/x86_64/semctl.S, mdk-stage1/dietlibc/i386/write12.S,
-	mdk-stage1/dietlibc/libm/cosh.c, mdk-stage1/dietlibc/include/libgen.h,
-	mdk-stage1/dietlibc/syscalls.s/bdflush.S,
-	mdk-stage1/dietlibc/libcompat/re_bsd.c,
-	mdk-stage1/dietlibc/libdl/_dl_rel.c,
-	mdk-stage1/dietlibc/alpha/__testandset.S,
-	mdk-stage1/dietlibc/libstdio/vscanf.c, mdk-stage1/dietlibc/i386/atanh.S,
-	mdk-stage1/dietlibc/i386/copysign.S, mdk-stage1/dietlibc/i386/htons.S,
-	mdk-stage1/dietlibc/libugly/hasmntopt.c,
-	mdk-stage1/dietlibc/libm/gamma.c, mdk-stage1/dietlibc/ia64/msgctl.S,
-	mdk-stage1/dietlibc/i386/recvfrom.S,
-	mdk-stage1/dietlibc/libcompat/daemon.c,
-	mdk-stage1/dietlibc/profiling/PORTING,
-	mdk-stage1/dietlibc/libdl/_dl_load.c,
-	mdk-stage1/dietlibc/libcompat/getline.c,
-	mdk-stage1/dietlibc/include/sys/sparc-ioctl.h,
-	mdk-stage1/dietlibc/libstdio/vprintf.c,
-	mdk-stage1/dietlibc/include/asm/statfs.h,
-	mdk-stage1/dietlibc/x86_64/shmdt.S, mdk-stage1/dietlibc/libugly/dirfd.c,
-	mdk-stage1/dietlibc/i386/atoll.S, mdk-stage1/dietlibc/ia64/sendto.S,
-	mdk-stage1/dietlibc/syscalls.s/getegid32.S,
-	mdk-stage1/dietlibc/i386/getsockopt.S,
-	mdk-stage1/dietlibc/libpthread/pthread_sigmask.c,
-	mdk-stage1/dietlibc/libpthread/pthread_key.c,
-	mdk-stage1/dietlibc/x86_64/shmget.S,
-	mdk-stage1/dietlibc/libcruft/__parse_1.c,
-	mdk-stage1/dietlibc/alpha/socketpair.S,
-	mdk-stage1/dietlibc/sparc/sigaction.c,
-	mdk-stage1/dietlibc/x86_64/shutdown.S,
-	mdk-stage1/dietlibc/libdl/_dl_alloc.c,
-	mdk-stage1/dietlibc/lib/setlinebuf.c, mdk-stage1/dietlibc/lib/bcd.c,
-	mdk-stage1/dietlibc/libcruft/getgrent.c,
-	mdk-stage1/dietlibc/i386/mcount.S, mdk-stage1/dietlibc/i386/ceil.S,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_fdatasync.c,
-	mdk-stage1/dietlibc/x86_64/recv.c, mdk-stage1/dietlibc/lib/adjtime.c,
-	mdk-stage1/dietlibc/i386/expm1.S, mdk-stage1/dietlibc/ia64/setjmp.S,
-	mdk-stage1/dietlibc/i386/cos.S, mdk-stage1/dietlibc/i386/fabs.S,
-	mdk-stage1/dietlibc/i386/htonl.S, mdk-stage1/dietlibc/i386/log10.S,
-	mdk-stage1/dietlibc/i386/pow.S,
-	mdk-stage1/dietlibc/include/linux/if_ether.h,
-	mdk-stage1/dietlibc/lib/cfsetospeed.c,
-	mdk-stage1/dietlibc/alpha/n_sigprocmask.S,
-	mdk-stage1/dietlibc/libcruft/localeconv.c,
-	mdk-stage1/dietlibc/ia64/shmat.S, mdk-stage1/dietlibc/libstdio/puts.c,
-	mdk-stage1/dietlibc/i386/memset.S, mdk-stage1/dietlibc/libm/poly.c,
-	mdk-stage1/dietlibc/include/libintl.h,
-	mdk-stage1/dietlibc/libugly/ftime.c,
-	mdk-stage1/dietlibc/ia64/socketpair.S, mdk-stage1/dietlibc/lib/rand_r.c,
-	mdk-stage1/dietlibc/i386/ilogb.S,
-	mdk-stage1/dietlibc/libpthread/pthread_equal.c,
-	mdk-stage1/dietlibc/libcrypt/md5.c, mdk-stage1/dietlibc/i386/cbrt.S,
-	mdk-stage1/dietlibc/syscalls.s/ptrace.S,
-	mdk-stage1/dietlibc/syscalls.s/pivot_root.S,
-	mdk-stage1/dietlibc/libdl/elf_hash.h, mdk-stage1/dietlibc/include/md5.h,
-	mdk-stage1/dietlibc/x86_64/__longjmp.S,
-	mdk-stage1/dietlibc/include/cpio.h,
-	mdk-stage1/dietlibc/syscalls.s/chown32.S,
-	mdk-stage1/dietlibc/x86_64/connect.S,
-	mdk-stage1/dietlibc/libugly/ptsname.c,
-	mdk-stage1/dietlibc/libstdio/fdprintf.c,
-	mdk-stage1/dietlibc/ia64/__waitpid.c,
-	mdk-stage1/dietlibc/i386/socketpair.S,
-	mdk-stage1/dietlibc/libstdio/fscanf.c,
-	mdk-stage1/dietlibc/ia64/getsockname.S,
-	mdk-stage1/dietlibc/lib/sigtimedwait.c,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigpending.S,
-	mdk-stage1/dietlibc/include/sys/ppc-ioctl.h,
-	mdk-stage1/dietlibc/libstdio/vfdprintf.c,
-	mdk-stage1/dietlibc/i386/usleep.S, mdk-stage1/dietlibc/include/iconv.h,
-	mdk-stage1/dietlibc/ia64/semctl.S,
-	mdk-stage1/dietlibc/include/sys/timex.h,
-	mdk-stage1/dietlibc/include/asm/i386-sigcontext.h,
-	mdk-stage1/dietlibc/i386/dyn_syscalls.S,
-	mdk-stage1/dietlibc/libcruft/getgrgid_r.c,
-	mdk-stage1/dietlibc/libcruft/sysconf.c,
-	mdk-stage1/dietlibc/include/tar.h, mdk-stage1/dietlibc/x86_64/umount.S,
-	mdk-stage1/dietlibc/libugly/getprotoent_r.c,
-	mdk-stage1/dietlibc/syscalls.s/prctl.S, mdk-stage1/dietlibc/i386/acos.S,
-	mdk-stage1/dietlibc/libpthread/pthread_funlockfile.c,
-	mdk-stage1/dietlibc/libcruft/res_mkquery.c,
-	mdk-stage1/dietlibc/include/sys/timeb.h,
-	mdk-stage1/dietlibc/libugly/iconv_close.c,
-	mdk-stage1/dietlibc/ia64/__alarm.c,
-	mdk-stage1/dietlibc/x86_64/socketpair.S,
-	mdk-stage1/dietlibc/i386/sinh.S, mdk-stage1/dietlibc/libdl/test/test.c,
-	mdk-stage1/dietlibc/include/asm/alpha-sigcontext.h,
-	mdk-stage1/dietlibc/i386/memchr.S,
-	mdk-stage1/dietlibc/profiling/profil.c,
-	mdk-stage1/dietlibc/libdl/_dl_rel.h, mdk-stage1/dietlibc/i386/__ten.S,
-	mdk-stage1/dietlibc/lib/execle.c,
-	mdk-stage1/dietlibc/include/sys/s390-ioctl.h,
-	mdk-stage1/dietlibc/i386/recvmsg.S,
-	mdk-stage1/dietlibc/ia64/getsockopt.S,
-	mdk-stage1/dietlibc/i386/md5asm.S, mdk-stage1/dietlibc/i386/memcpy.S,
-	mdk-stage1/dietlibc/libcruft/__parse.c,
-	mdk-stage1/dietlibc/x86_64/setsockopt.S,
-	mdk-stage1/dietlibc/libcruft/getspnam_r.c,
-	mdk-stage1/dietlibc/syscalls.s/getgid32.S,
-	mdk-stage1/dietlibc/libpthread/pthread_fdglue2.c,
-	mdk-stage1/dietlibc/ia64/__time.c, mdk-stage1/dietlibc/i386/tanh.S,
-	mdk-stage1/dietlibc/lib/siginterrupt.c,
-	mdk-stage1/dietlibc/i386/strcat.S,
-	mdk-stage1/dietlibc/libugly/grantpt.c, mdk-stage1/dietlibc/lib/rand48.c,
-	mdk-stage1/dietlibc/syscalls.s/setresgid32.S,
-	mdk-stage1/dietlibc/syscalls.s/lchown32.S,
-	mdk-stage1/dietlibc/profiling/README, mdk-stage1/dietlibc/ia64/msgsnd.S,
-	mdk-stage1/dietlibc/libugly/getservbyname_r.c,
-	mdk-stage1/dietlibc/x86_64/send.c, mdk-stage1/dietlibc/i386/socket.S,
-	mdk-stage1/dietlibc/ia64/setsockopt.S,
-	mdk-stage1/dietlibc/include/asm/parisc-sigcontext.h,
-	mdk-stage1/dietlibc/include/sys/gmon.h,
-	mdk-stage1/dietlibc/i386/acosh.S, mdk-stage1/dietlibc/ia64/socket.S,
-	mdk-stage1/dietlibc/libcruft/dn_expand.c,
-	mdk-stage1/dietlibc/lib/binshstr.c,
-	mdk-stage1/dietlibc/include/netinet/udp.h,
-	mdk-stage1/dietlibc/x86_64/msgget.S,
-	mdk-stage1/dietlibc/libugly/getprotobyname_r.c,
-	mdk-stage1/dietlibc/libcruft/res_search.c,
-	mdk-stage1/dietlibc/libshell/dirname.c,
-	mdk-stage1/dietlibc/i386/exp10.S, mdk-stage1/dietlibc/libdl/_dl_queue.c,
-	mdk-stage1/dietlibc/lib/socketpair.c, mdk-stage1/dietlibc/i386/ldexp.S,
-	mdk-stage1/dietlibc/libstdio/ftello64.c,
-	mdk-stage1/dietlibc/libpthread/pthread_fputc.c,
-	mdk-stage1/dietlibc/libdl/test/test_so.c,
-	mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/lib/pwrite64.c,
-	mdk-stage1/dietlibc/include/netinet/tcp.h,
-	mdk-stage1/dietlibc/libm/pow.c,
-	mdk-stage1/dietlibc/libcruft/res_query.c,
-	mdk-stage1/dietlibc/include/asm/mips-sigcontext.h,
-	mdk-stage1/dietlibc/libstdio/fputc_unlocked.c,
-	mdk-stage1/dietlibc/libcruft/sysconf_cpus.c,
-	mdk-stage1/dietlibc/alpha/lseek64.S, mdk-stage1/dietlibc/i386/recv.S,
-	mdk-stage1/dietlibc/libcruft/getspent.c,
-	mdk-stage1/dietlibc/libugly/iconv_open.c,
-	mdk-stage1/dietlibc/lib/memrchr.c,
-	mdk-stage1/dietlibc/syscalls.s/epoll_wait.S,
-	mdk-stage1/dietlibc/x86_64/sendmsg.S,
-	mdk-stage1/dietlibc/libugly/wtent.c, mdk-stage1/dietlibc/i386/mmap.S,
-	mdk-stage1/dietlibc/syscalls.s/getgroups32.S,
-	mdk-stage1/dietlibc/i386/atol.S,
-	mdk-stage1/dietlibc/include/sys/ucontext.h,
-	mdk-stage1/dietlibc/libcruft/dnscruft4.c,
-	mdk-stage1/dietlibc/include/sys/mips-ioctl.h,
-	mdk-stage1/dietlibc/include/netinet/ip_icmp.h,
-	mdk-stage1/dietlibc/lib/sigqueueinfo.c,
-	mdk-stage1/dietlibc/libcruft/__prepare_parse.c,
-	mdk-stage1/dietlibc/x86_64/waitpid.S,
-	mdk-stage1/dietlibc/i386/setsockopt.S,
-	mdk-stage1/dietlibc/include/sys/gmon_out.h,
-	mdk-stage1/dietlibc/lib/cfsetispeed.c,
-	mdk-stage1/dietlibc/i386/socketcall.S,
-	mdk-stage1/dietlibc/include/asm/sigcontext.h,
-	mdk-stage1/dietlibc/x86_64/msgsnd.S, mdk-stage1/dietlibc/lib/labs.c,
-	mdk-stage1/dietlibc/x86_64/recvmsg.S,
-	mdk-stage1/dietlibc/libugly/getservbyport.c,
-	mdk-stage1/dietlibc/libugly/getaddrinfo.c,
-	mdk-stage1/dietlibc/ia64/syscalls.h,
-	mdk-stage1/dietlibc/libcompat/getdelim.c,
-	mdk-stage1/dietlibc/lib/__truncate64.c,
-	mdk-stage1/dietlibc/include/sys/hppa-ioctl.h,
-	mdk-stage1/dietlibc/libcrypt/md5crypt.c,
-	mdk-stage1/dietlibc/syscalls.s/n_sigsuspend.S,
-	mdk-stage1/dietlibc/i386/listen.S,
-	mdk-stage1/dietlibc/lib/if_nameindex.c,
-	mdk-stage1/dietlibc/syscalls.s/truncate64.S,
-	mdk-stage1/dietlibc/libcruft/__parse_nws.c,
-	mdk-stage1/dietlibc/lib/readdir64.c,
-	mdk-stage1/dietlibc/syscalls.s/setuid32.S,
-	mdk-stage1/dietlibc/libugly/gethostent.c,
-	mdk-stage1/dietlibc/syscalls.s/epoll_create.S,
-	mdk-stage1/dietlibc/include/sys/sysmacros.h,
-	mdk-stage1/dietlibc/syscalls.s/madvise.S,
-	mdk-stage1/dietlibc/lib/pwrite.c, mdk-stage1/dietlibc/i386/log1p.S,
-	mdk-stage1/dietlibc/ia64/shutdown.S,
-	mdk-stage1/dietlibc/lib/__v_scanf.c,
-	mdk-stage1/dietlibc/include/sys/epoll.h,
-	mdk-stage1/dietlibc/x86_64/start.S,
-	mdk-stage1/dietlibc/x86_64/sigaction.c,
-	mdk-stage1/dietlibc/i386/getsockname.S, mdk-stage1/dietlibc/i386/sin.S,
-	mdk-stage1/dietlibc/i386/sincos.S,
-	mdk-stage1/dietlibc/libcruft/scandir64.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/i386/asinh.S,
-	mdk-stage1/dietlibc/libstdio/tmpfile.c,
-	mdk-stage1/dietlibc/syscalls.s/n_sigprocmask.S,
-	mdk-stage1/dietlibc/ia64/recvfrom.S, mdk-stage1/dietlibc/i386/ipow.S,
-	mdk-stage1/dietlibc/syscalls.s/init_module.S,
-	mdk-stage1/dietlibc/lib/__ftruncate64.c,
-	mdk-stage1/dietlibc/i386/atan.S, mdk-stage1/dietlibc/libm/tanh.c,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigprocmask.S,
-	mdk-stage1/dietlibc/x86_64/accept.S, mdk-stage1/dietlibc/ia64/start.S,
-	mdk-stage1/dietlibc/include/sysexits.h,
-	mdk-stage1/dietlibc/lib/signal.c, mdk-stage1/dietlibc/ia64/accept.S,
-	mdk-stage1/dietlibc/include/stddef.h,
-	mdk-stage1/dietlibc/include/stdarg.h,
-	mdk-stage1/dietlibc/libstdio/fgetc_unlocked.c,
-	mdk-stage1/dietlibc/syscalls.s/n_sigaction.S,
-	mdk-stage1/dietlibc/lib/strxfrm.c, mdk-stage1/dietlibc/ia64/shmctl.S,
-	mdk-stage1/dietlibc/x86_64/msgrcv.S,
-	mdk-stage1/dietlibc/libcruft/getpwnam_r.c,
-	mdk-stage1/dietlibc/i386/libm2.S, mdk-stage1/dietlibc/ia64/fork.S:
-	Import dietlibc 0.22 + other fixes for AMD64
-
-	* mdk-stage1/dns.c, mdk-stage1/dietlibc/lib/msgget.c,
-	mdk-stage1/dietlibc/lib/strerror.c,
-	mdk-stage1/insmod-modutils/obj/obj_s390.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyname.c,
-	mdk-stage1/dietlibc/librpc/rpc_prot.c,
-	mdk-stage1/dietlibc/lib/iscntrl.c, mdk-stage1/dietlibc/include/stdint.h,
-	mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/include/stdlib.h,
-	mdk-stage1/dietlibc/libpthread/pthread_cancel.c,
-	mdk-stage1/dietlibc/libdl/dlopen.c, mdk-stage1/dietlibc/lib/isgraph.c,
-	mdk-stage1/dietlibc/lib/closedir.c,
-	mdk-stage1/insmod-modutils/obj/obj_alpha.c,
-	mdk-stage1/insmod-modutils/include/config.h,
-	mdk-stage1/dietlibc/lib/alloc.c, mdk-stage1/dietlibc/lib/tcsetpgrp.c,
-	mdk-stage1/dietlibc/i386/Makefile.add,
-	mdk-stage1/dietlibc/include/sys/mman.h,
-	mdk-stage1/dietlibc/include/fcntl.h, mdk-stage1/dietlibc/lib/memchr.c,
-	mdk-stage1/dietlibc/lib/isupper.c, mdk-stage1/dietlibc/lib/qsort.c,
-	mdk-stage1/dietlibc/lib/isxdigit.c,
-	mdk-stage1/dietlibc/librpc/svc_raw.c,
-	mdk-stage1/dietlibc/include/arpa/nameser.h,
-	mdk-stage1/dietlibc/lib/open64.c, mdk-stage1/newt/form.c,
-	mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/insmod-modutils/obj/Makefile, mdk-stage1/dietlibc/lib/ftw.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa.c,
-	mdk-stage1/dietlibc/libstdio/ftell.c,
-	mdk-stage1/dietlibc/libstdio/fdopen.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c,
-	mdk-stage1/dietlibc/include/pwd.h, mdk-stage1/dietlibc/lib/snprintf.c,
-	mdk-stage1/dietlibc/i386/unified.S, mdk-stage1/dietlibc/lib/msgrcv.c,
-	mdk-stage1/dietlibc/alpha/start.S,
-	mdk-stage1/insmod-modutils/include/kallsyms.h,
-	mdk-stage1/dietlibc/include/sys/ptrace.h,
-	mdk-stage1/dietlibc/lib/mkfifo.c, mdk-stage1/dietlibc/lib/send.c,
-	mdk-stage1/dietlibc/lib/execvp.c,
-	mdk-stage1/dietlibc/librpc/get_myaddress.c,
-	mdk-stage1/insmod-modutils/include/elf_m68k.h,
-	mdk-stage1/dietlibc/libugly/mktime.c,
-	mdk-stage1/dietlibc/sparc/__longjmp.S,
-	mdk-stage1/dietlibc/include/pthread.h,
-	mdk-stage1/dietlibc/libpthread/pthread_key_delete.c,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/syscalls.s/nice.S,
-	mdk-stage1/insmod-modutils/include/elf_mips.h,
-	mdk-stage1/dietlibc/syscalls.s/getdents64.S,
-	mdk-stage1/dietlibc/librpc/svc_run.c, mdk-stage1/dietlibc/lib/isblank.c,
-	mdk-stage1/dietlibc/syscalls.s/time.S,
-	mdk-stage1/dietlibc/libugly/gmtime_r.c,
-	mdk-stage1/dietlibc/include/sys/kd.h,
-	mdk-stage1/dietlibc/librpc/bindresvport.c,
-	mdk-stage1/dietlibc/libstdio/fdglue.c,
-	mdk-stage1/dietlibc/lib/ttyname.c,
-	mdk-stage1/dietlibc/libcruft/getspnam.c,
-	mdk-stage1/dietlibc/lib/strncat.c,
-	mdk-stage1/dietlibc/libugly/strsignal.c,
-	mdk-stage1/dietlibc/librpc/clnt_tcp.c,
-	mdk-stage1/insmod-modutils/util/sys_cm.c,
-	mdk-stage1/dietlibc/libcruft/initgroups.c,
-	mdk-stage1/dietlibc/lib/sendmsg.c,
-	mdk-stage1/dietlibc/include/sys/stat.h,
-	mdk-stage1/dietlibc/libshell/fnmatch.c,
-	mdk-stage1/dietlibc/syscalls.s/setresgid.S,
-	mdk-stage1/dietlibc/libstdio/feof.c, mdk-stage1/init-libc-headers.h,
-	mdk-stage1/dietlibc/include/dirent.h,
-	mdk-stage1/dietlibc/libpthread/thread_internal.h,
-	mdk-stage1/insmod-modutils/util/snap_shot.c,
-	mdk-stage1/dietlibc/include/shadow.h,
-	mdk-stage1/dietlibc/include/sys/select.h,
-	mdk-stage1/dietlibc/lib/strsep.c,
-	mdk-stage1/dietlibc/include/rpc/auth_unix.h,
-	mdk-stage1/dietlibc/lib/msgsnd.c,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c,
-	mdk-stage1/insmod-modutils/util/logger.c,
-	mdk-stage1/dietlibc/libpthread/Makefile,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c,
-	mdk-stage1/dietlibc/lib/__ltostr.c, mdk-stage1/dietlibc/lib/strlen.c,
-	mdk-stage1/dietlibc/libregex/rx.c,
-	mdk-stage1/insmod-modutils/util/xsystem.c,
-	mdk-stage1/dietlibc/liblatin1/latin1-islower.c,
-	mdk-stage1/dietlibc/lib/raise.c,
-	mdk-stage1/dietlibc/libpthread/pthread_setspecific.c,
-	mdk-stage1/dietlibc/lib/semget.c,
-	mdk-stage1/dietlibc/libcruft/inet_aton.c,
-	mdk-stage1/dietlibc/lib/sigismember.c, mdk-stage1/dietlibc/librpc/svc.c,
-	mdk-stage1/dietlibc/lib/sigemptyset.c,
-	mdk-stage1/dietlibc/include/sys/vfs.h,
-	mdk-stage1/insmod-modutils/include/elf_ppc.h,
-	mdk-stage1/dietlibc/libugly/getprotoent.c,
-	mdk-stage1/dietlibc/lib/__stat64.c, mdk-stage1/dietlibc/include/elf.h,
-	mdk-stage1/dietlibc/lib/strncmp.c,
-	mdk-stage1/dietlibc/lib/gethostname.c,
-	mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
-	mdk-stage1/dietlibc/lib/perror.c, mdk-stage1/dietlibc/include/time.h,
-	mdk-stage1/dietlibc/lib/strncasecmp.c,
-	mdk-stage1/dietlibc/lib/__lltostr.c,
-	mdk-stage1/dietlibc/libpthread/pthread_key_create.c,
-	mdk-stage1/dietlibc/include/fnmatch.h,
-	mdk-stage1/dietlibc/libugly/time_table_spd.c,
-	mdk-stage1/dietlibc/libstdio/stderr.c,
-	mdk-stage1/insmod-modutils/util/arch64.c,
-	mdk-stage1/dietlibc/libdl/dlerror.c,
-	mdk-stage1/dietlibc/libcruft/mkstemp.c,
-	mdk-stage1/dietlibc/libstdio/ungetc.c,
-	mdk-stage1/dietlibc/libugly/tzfile.c, mdk-stage1/log.c,
-	mdk-stage1/dietlibc/include/rpc/xdr.h,
-	mdk-stage1/dietlibc/include/rpc/key_prot.h,
-	mdk-stage1/insmod-modutils/include/elf_sparc.h,
-	mdk-stage1/dietlibc/sparc/start.S,
-	mdk-stage1/dietlibc/libcruft/getpwnam.c,
-	mdk-stage1/dietlibc/libpthread/pthread_spinlock.c,
-	mdk-stage1/dietlibc/include/sys/un.h,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c,
-	mdk-stage1/insmod-busybox/insmod.c,
-	mdk-stage1/insmod-modutils/include/elf_arm.h,
-	mdk-stage1/dietlibc/alpha/unified.S,
-	mdk-stage1/dietlibc/include/sys/io.h,
-	mdk-stage1/dietlibc/lib/getsockname.c,
-	mdk-stage1/dietlibc/i386/__testandset.S,
-	mdk-stage1/dietlibc/libcruft/dnscruft.c,
-	mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/rp-pppoe/src/Makefile,
-	mdk-stage1/dietlibc/lib/tcdrain.c,
-	mdk-stage1/dietlibc/include/sys/time.h,
-	mdk-stage1/dietlibc/lib/errno_location.c,
-	mdk-stage1/dietlibc/liblatin1/latin1-isprint.c,
-	mdk-stage1/dietlibc/libshell/glob.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c,
-	mdk-stage1/dietlibc/lib/_brk.c,
-	mdk-stage1/insmod-modutils/obj/obj_arm.c,
-	mdk-stage1/dietlibc/lib/sys_siglist.c,
-	mdk-stage1/dietlibc/libcruft/getgrnam.c,
-	mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/lib/isascii.c,
-	mdk-stage1/dietlibc/librpc/xdr_reference.c,
-	mdk-stage1/dietlibc/sparc/urem.S, mdk-stage1/dietlibc/i386/__longjmp.S,
-	mdk-stage1/dietlibc/include/sys/syslog.h, mdk-stage1/Makefile,
-	mdk-stage1/dietlibc/lib/bind.c, mdk-stage1/dietlibc/libdl/Makefile,
-	mdk-stage1/dietlibc/librpc/svc_simple.c,
-	mdk-stage1/dietlibc/lib/lockf.c, mdk-stage1/dietlibc/lib/htons.c,
-	mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/i386/setjmp.S,
-	mdk-stage1/dietlibc/syscalls.s/ioperm.S,
-	mdk-stage1/dietlibc/lib/getenv.c,
-	mdk-stage1/dietlibc/include/features.h,
-	mdk-stage1/dietlibc/libpthread/CHANGES,
-	mdk-stage1/dietlibc/include/arpa/inet.h,
-	mdk-stage1/dietlibc/lib/strtoul.c,
-	mdk-stage1/dietlibc/libstdio/fprintf.c,
-	mdk-stage1/dietlibc/include/regex.h,
-	mdk-stage1/dietlibc/lib/__stat64_cvt.c,
-	mdk-stage1/dietlibc/libcruft/inet_ntop.c,
-	mdk-stage1/dietlibc/include/getopt.h,
-	mdk-stage1/insmod-modutils/obj/obj_ia64.c, mdk-stage1/minilibc.c,
-	mdk-stage1/insmod-modutils/include/util.h,
-	mdk-stage1/insmod-modutils/include/version.h,
-	mdk-stage1/dietlibc/alpha/Makefile.add,
-	mdk-stage1/dietlibc/include/net/if.h,
-	mdk-stage1/dietlibc/lib/recvfrom.c, mdk-stage1/dietlibc/sparc/clone.S,
-	mdk-stage1/dietlibc/lib/memccpy.c, mdk-stage1/dietlibc/lib/strtoull.c,
-	mdk-stage1/dietlibc/libcruft/getgrgid.c,
-	mdk-stage1/dietlibc/librpc/auth_unix.c,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/include/strings.h,
-	mdk-stage1/insmod-modutils/include/elf_alpha.h,
-	mdk-stage1/dietlibc/lib/execv.c,
-	mdk-stage1/dietlibc/include/sys/param.h,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c,
-	mdk-stage1/dietlibc/librpc/xdr_mem.c,
-	mdk-stage1/dietlibc/libcruft/res_init.c,
-	mdk-stage1/dietlibc/libpthread/pthread_detach.c,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c,
-	mdk-stage1/newt/Makefile, mdk-stage1/dietlibc/lib/isatty.c,
-	mdk-stage1/dietlibc/include/sys/mtio.h,
-	mdk-stage1/dietlibc/lib/memcmp.c,
-	mdk-stage1/dietlibc/include/sys/sysinfo.h,
-	mdk-stage1/dietlibc/librpc/clnt_simple.c,
-	mdk-stage1/dietlibc/lib/vfork.c, mdk-stage1/dietlibc/lib/isalpha.c,
-	mdk-stage1/dietlibc/lib/strncpy.c, mdk-stage1/dietlibc/lib/strcmp.c,
-	mdk-stage1/insmod-modutils/include/obj.h,
-	mdk-stage1/dietlibc/include/rpc/clnt.h, mdk-stage1/frontend.h,
-	mdk-stage1/dietlibc/libcruft/getpass.c, mdk-stage1/dietlibc/lib/abort.c,
-	mdk-stage1/dietlibc/syscalls.s/stime.S,
-	mdk-stage1/dietlibc/sparc/fork.S, mdk-stage1/dietlibc/lib/readdir.c,
-	mdk-stage1/dietlibc/lib/sbrk.c,
-	mdk-stage1/dietlibc/include/sys/reboot.h,
-	mdk-stage1/dietlibc/syscalls.s/getresuid.S,
-	mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c,
-	mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/putenv.c,
-	mdk-stage1/dietlibc/include/paths.h,
-	mdk-stage1/dietlibc/librpc/pmap_prot2.c,
-	mdk-stage1/dietlibc/librpc/pmap_clnt.c,
-	mdk-stage1/dietlibc/lib/memcpy.c,
-	mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
-	mdk-stage1/dietlibc/syscalls.s/_llseek.S,
-	mdk-stage1/dietlibc/include/setjmp.h,
-	mdk-stage1/insmod-modutils/obj/obj_m68k.c,
-	mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/abs.c,
-	mdk-stage1/dietlibc/Makefile, mdk-stage1/dietlibc/include/net/route.h,
-	mdk-stage1/dietlibc/syscalls.s/fstat64.S, mdk-stage1/mar/Makefile,
-	mdk-stage1/dietlibc/include/rpc/auth.h, mdk-stage1/dietlibc/ppc/start.S,
-	mdk-stage1/dietlibc/lib/assert_fail.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc.c,
-	mdk-stage1/dietlibc/lib/if_nametoindex.c,
-	mdk-stage1/dietlibc/include/inttypes.h, mdk-stage1/dietlibc/lib/atoi.c,
-	mdk-stage1/dietlibc/librpc/svc_tcp.c,
-	mdk-stage1/dietlibc/alpha/setjmp.S,
-	mdk-stage1/dietlibc/include/net/if_arp.h, mdk-stage1/ppp/pppd/Makefile,
-	mdk-stage1/insmod-modutils/obj/obj_common.c,
-	mdk-stage1/dietlibc/librpc/authunix_prot.c,
-	mdk-stage1/dietlibc/lib/longjmp.c,
-	mdk-stage1/dietlibc/libugly/getmntent.c,
-	mdk-stage1/insmod-modutils/obj/obj_load.c, mdk-stage1/dietlibc/diet.c,
-	mdk-stage1/dietlibc/libstdio/fwrite.c,
-	mdk-stage1/insmod-modutils/obj/obj_mips.c,
-	mdk-stage1/dietlibc/libugly/asprintf.c,
-	mdk-stage1/dietlibc/librpc/clnt_udp.c,
-	mdk-stage1/dietlibc/lib/recvmsg.c, mdk-stage1/dietlibc/lib/sendto.c,
-	mdk-stage1/dietlibc/include/endian.h,
-	mdk-stage1/dietlibc/libstdio/stdin.c,
-	mdk-stage1/dietlibc/libdl/dlclose.c, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/Makefile.common, mdk-stage1/dietlibc/dietdirent.h,
-	mdk-stage1/insmod-modutils/util/xstrcat.c,
-	mdk-stage1/dietlibc/libpthread/pthread_testcancel.c,
-	mdk-stage1/dietlibc/libshell/realpath.c, mdk-stage1/rescue-gui.c,
-	mdk-stage1/dietlibc/lib/tcsetattr.c,
-	mdk-stage1/dietlibc/libstdio/fgets.c,
-	mdk-stage1/dietlibc/include/rpc/netdb.h,
-	mdk-stage1/dietlibc/lib/sscanf.c, mdk-stage1/dietlibc/lib/creat.c,
-	mdk-stage1/dietlibc/lib/getdomainname.c,
-	mdk-stage1/dietlibc/libstdio/fclose.c,
-	mdk-stage1/dietlibc/lib/vsnprintf.c, mdk-stage1/dietlibc/lib/ispunct.c,
-	mdk-stage1/insmod-modutils/util/sys_oim.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c,
-	mdk-stage1/dietlibc/sparc/mmap.c, mdk-stage1/dietlibc/dietstdio.h,
-	mdk-stage1/dietlibc/librpc/xdr_array.c, mdk-stage1/init.c,
-	mdk-stage1/dietlibc/lib/__isnan.c,
-	mdk-stage1/dietlibc/include/sys/resource.h,
-	mdk-stage1/dietlibc/lib/tolower.c,
-	mdk-stage1/dietlibc/alpha/__longjmp.S,
-	mdk-stage1/dietlibc/libpthread/pthread_join.c,
-	mdk-stage1/dietlibc/libstdio/fopen.c,
-	mdk-stage1/dietlibc/syscalls.s/umount2.S,
-	mdk-stage1/dietlibc/include/signal.h,
-	mdk-stage1/dietlibc/librpc/rpc_callmsg.c,
-	mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c,
-	mdk-stage1/dietlibc/i386/clone.S,
-	mdk-stage1/insmod-modutils/include/elf_i386.h,
-	mdk-stage1/dietlibc/lib/__dtostr.c,
-	mdk-stage1/dietlibc/syscalls.s/ipc.S,
-	mdk-stage1/dietlibc/include/sys/cdefs.h,
-	mdk-stage1/dietlibc/include/sys/types.h,
-	mdk-stage1/insmod-modutils/util/sys_gks.c,
-	mdk-stage1/insmod-modutils/util/xrealloc.c,
-	mdk-stage1/dietlibc/include/sys/shm.h,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyname_r.c,
-	mdk-stage1/dietlibc/lib/lseek64.c,
-	mdk-stage1/dietlibc/libdl/_dl_search.c,
-	mdk-stage1/dietlibc/dietfeatures.h,
-	mdk-stage1/dietlibc/libcruft/gethostbyaddr.c,
-	mdk-stage1/dietlibc/librpc/svc_udp.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c,
-	mdk-stage1/dietlibc/libugly/localtime_r.c,
-	mdk-stage1/dietlibc/include/netdb.h, mdk-stage1/dietlibc/lib/semop.c,
-	mdk-stage1/insmod-modutils/obj/obj_i386.c,
-	mdk-stage1/dietlibc/lib/opendir.c, mdk-stage1/dietlibc/libugly/system.c,
-	mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/include/dlfcn.h,
-	mdk-stage1/dietlibc/lib/usleep.c, mdk-stage1/dietlibc/lib/strchr.c,
-	mdk-stage1/dietlibc/ppc/unified.S,
-	mdk-stage1/dietlibc/syscalls.s/waitpid.S,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c,
-	mdk-stage1/dietlibc/lib/memset.c, mdk-stage1/dietlibc/lib/__fstat64.c,
-	mdk-stage1/dietlibc/include/sched.h,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c,
-	mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/lib/pread.c,
-	mdk-stage1/dietlibc/.cvsignore, mdk-stage1/dietlibc/sparc/setjmp.S,
-	mdk-stage1/dietlibc/librpc/pmap_rmt.c,
-	mdk-stage1/insmod-modutils/util/xstrdup.c,
-	mdk-stage1/dietlibc/include/sys/ioctl.h,
-	mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c,
-	mdk-stage1/dietlibc/lib/exec_lib.c,
-	mdk-stage1/dietlibc/include/string.h,
-	mdk-stage1/dietlibc/libpthread/pthread_atfork.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc64.h,
-	mdk-stage1/dietlibc/include/assert.h, mdk-stage1/dietlibc/lib/connect.c,
-	mdk-stage1/dietlibc/include/locale.h,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_init.c,
-	mdk-stage1/dietlibc/lib/execl.c, mdk-stage1/dietlibc/lib/tcflush.c,
-	mdk-stage1/dietlibc/libstdio/setvbuf.c,
-	mdk-stage1/dietlibc/libpthread/README,
-	mdk-stage1/insmod-modutils/include/elf_s390.h,
-	mdk-stage1/dietlibc/libcruft/getlogin.c,
-	mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/strcpy.c,
-	mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/libdl/_dl_open.c,
-	mdk-stage1/dietlibc/include/stdio.h,
-	mdk-stage1/insmod-modutils/util/sys_nim.c,
-	mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/libdl/dlsym.c,
-	mdk-stage1/dietlibc/lib/setsockopt.c,
-	mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c,
-	mdk-stage1/dietlibc/libcruft/inet_ntoa.c,
-	mdk-stage1/dietlibc/lib/vsprintf.c,
-	mdk-stage1/insmod-modutils/util/alias.h,
-	mdk-stage1/dietlibc/include/grp.h, mdk-stage1/pcmcia_/Makefile,
-	mdk-stage1/dietlibc/lib/isprint.c,
-	mdk-stage1/dietlibc/syscalls.s/setresuid.S,
-	mdk-stage1/dietlibc/syscalls.s/lstat64.S,
-	mdk-stage1/dietlibc/lib/__getcwd.c, mdk-stage1/dietlibc/lib/isdigit.c,
-	mdk-stage1/dietlibc/lib/semctl.c, mdk-stage1/dietlibc/include/rpc/rpc.h,
-	mdk-stage1/dietlibc/lib/strstr.c,
-	mdk-stage1/dietlibc/include/rpc/pmap_rmt.h,
-	mdk-stage1/dietlibc/include/rpc/types.h,
-	mdk-stage1/dietlibc/libcruft/inet_pton.c,
-	mdk-stage1/insmod-modutils/util/sys_qm.c,
-	mdk-stage1/dietlibc/include/utmp.h, mdk-stage1/dietlibc/lib/sleep.c,
-	mdk-stage1/dietlibc/libugly/asctime_r.c,
-	mdk-stage1/dietlibc/include/netinet/in.h,
-	mdk-stage1/dietlibc/syscalls.s/sendfile.S,
-	mdk-stage1/dietlibc/include/sys/msg.h,
-	mdk-stage1/dietlibc/include/rpc/svc.h,
-	mdk-stage1/dietlibc/include/netinet/ip.h,
-	mdk-stage1/dietlibc/libcruft/getpagesize.c,
-	mdk-stage1/dietlibc/sparc/unified.S,
-	mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/dietlibc/lib/execlp.c, mdk-stage1/dietlibc/libstdio/fread.c,
-	mdk-stage1/dietlibc/librpc/xdr.c, mdk-stage1/ppp/include/net/ppp_defs.h,
-	mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/lib/reboot.c,
-	mdk-stage1/dietlibc/librpc/svc_auth_unix.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
-	mdk-stage1/dietlibc/include/errno.h,
-	mdk-stage1/dietlibc/syscalls.s/stat64.S,
-	mdk-stage1/dietlibc/include/sys/uio.h,
-	mdk-stage1/dietlibc/librpc/pmap_getport.c,
-	mdk-stage1/dietlibc/libstdio/printf.c,
-	mdk-stage1/dietlibc/include/sys/times.h,
-	mdk-stage1/dietlibc/lib/sigaddset.c, mdk-stage1/dietlibc/lib/sigjmp.c,
-	mdk-stage1/dietlibc/lib/getopt.c,
-	mdk-stage1/dietlibc/lib/if_indextoname.c,
-	mdk-stage1/dietlibc/libcrypt/crypt.c,
-	mdk-stage1/insmod-modutils/Makefile,
-	mdk-stage1/dietlibc/include/rpc/pmap_prot.h,
-	mdk-stage1/dietlibc/libstdio/fflush.c,
-	mdk-stage1/dietlibc/libugly/popen.c,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c,
-	mdk-stage1/dietlibc/ppc/mmap.c, mdk-stage1/dietlibc/include/sys/poll.h,
-	mdk-stage1/dietlibc/librpc/getrpcport.c,
-	mdk-stage1/dietlibc/librpc/auth_none.c,
-	mdk-stage1/dietlibc/lib/pread64.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c,
-	mdk-stage1/insmod-modutils/util/config.c,
-	mdk-stage1/dietlibc/lib/strtoll.c, mdk-stage1/dietlibc/include/resolv.h,
-	mdk-stage1/insmod-modutils/util/sys_dm.c,
-	mdk-stage1/dietlibc/lib/bsearch.c, mdk-stage1/dietlibc/lib/strcasecmp.c,
-	mdk-stage1/dietlibc/sparc/shmat.c,
-	mdk-stage1/dietlibc/librpc/pmap_getmaps.c,
-	mdk-stage1/dietlibc/ppc/__testandset.S,
-	mdk-stage1/dietlibc/libugly/setenv.c,
-	mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/libdl/README,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c,
-	mdk-stage1/insmod-busybox/Makefile,
-	mdk-stage1/dietlibc/librpc/clnt_generic.c,
-	mdk-stage1/dietlibc/lib/memmove.c, mdk-stage1/dietlibc/sparc/pipe.S,
-	mdk-stage1/dietlibc/include/daemon.h,
-	mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c,
-	mdk-stage1/dietlibc/include/math.h, mdk-stage1/dietlibc/sparc/udiv.S,
-	mdk-stage1/dietlibc/lib/remove.c,
-	mdk-stage1/dietlibc/include/sys/sendfile.h,
-	mdk-stage1/dietlibc/libugly/isleap.c,
-	mdk-stage1/dietlibc/syscalls.s/syslog.S,
-	mdk-stage1/insmod-modutils/obj/obj_reloc.c,
-	mdk-stage1/dietlibc/lib/getpeername.c,
-	mdk-stage1/dietlibc/include/sys/ipc.h, mdk-stage1/dietlibc/lib/rand.c,
-	mdk-stage1/dietlibc/include/ftw.h,
-	mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c,
-	mdk-stage1/dietlibc/lib/shmat.c,
-	mdk-stage1/insmod-modutils/include/module.h,
-	mdk-stage1/dietlibc/librpc/xdr_stdio.c,
-	mdk-stage1/insmod-modutils/util/xmalloc.c,
-	mdk-stage1/dietlibc/sparc/umul.S,
-	mdk-stage1/insmod-modutils/include/kerneld.h,
-	mdk-stage1/dietlibc/librpc/clnt_raw.c,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c,
-	mdk-stage1/dietlibc/libstdio/stdout.c, mdk-stage1/dietlibc/README,
-	mdk-stage1/dietlibc/libcruft/herrno_location.c,
-	mdk-stage1/dietlibc/lib/shmctl.c,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c,
-	mdk-stage1/dietlibc/librpc/xdr_rec.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c,
-	mdk-stage1/dietlibc/include/rpc/rpc_msg.h,
-	mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/lib/toupper.c,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_open.c,
-	mdk-stage1/dietlibc/lib/sigfillset.c, mdk-stage1/dietlibc/lib/listen.c,
-	mdk-stage1/dietlibc/include/glob.h, mdk-stage1/dietlibc/libdl/_dl_int.h,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c,
-	mdk-stage1/dietlibc/include/sys/mount.h, mdk-stage1/disk.c,
-	mdk-stage1/dietlibc/lib/socket.c,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c,
-	mdk-stage1/dietlibc/libugly/strftime.c,
-	mdk-stage1/dietlibc/lib/shutdown.c, mdk-stage1/insmod-modutils/insmod.c,
-	mdk-stage1/dietlibc/lib/msgctl.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyname2.c,
-	mdk-stage1/dietlibc/include/rpc/pmap_clnt.h,
-	mdk-stage1/dietlibc/syscalls.s/pause.S,
-	mdk-stage1/dietlibc/syscalls.s/socketcall.S,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_init.c,
-	mdk-stage1/dietlibc/liblatin1/latin1-isupper.c,
-	mdk-stage1/dietlibc/lib/islower.c,
-	mdk-stage1/dietlibc/sparc/Makefile.add,
-	mdk-stage1/dietlibc/include/sys/wait.h,
-	mdk-stage1/dietlibc/lib/isalnum.c, mdk-stage1/dietlibc/libstdio/fseek.c,
-	mdk-stage1/slang/Makefile, mdk-stage1/minilibc.h,
-	mdk-stage1/dietlibc/librpc/getrpcent.c, mdk-stage1/dietlibc/AUTHOR,
-	mdk-stage1/dietlibc/lib/getsockopt.c,
-	mdk-stage1/dietlibc/libdl/_dl_jump.S, mdk-stage1/dietlibc/lib/atol.c,
-	mdk-stage1/dietlibc/lib/isspace.c,
-	mdk-stage1/dietlibc/syscalls.s/__pread.S,
-	mdk-stage1/dietlibc/lib/strtol.c, mdk-stage1/dietlibc/lib/htonl.c,
-	mdk-stage1/dietlibc/include/sys/sem.h,
-	mdk-stage1/insmod-modutils/obj/obj_ppc.c,
-	mdk-stage1/dietlibc/lib/shmget.c,
-	mdk-stage1/dietlibc/include/rpc/auth_des.h,
-	mdk-stage1/dietlibc/libcruft/getpwuid.c,
-	mdk-stage1/dietlibc/libugly/logging.c,
-	mdk-stage1/dietlibc/libcruft/dnscruft2.c,
-	mdk-stage1/dietlibc/libpthread/pthread_create.c,
-	mdk-stage1/dietlibc/alpha/clone.S,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c: Merge from
-	R9_0-AMD64, most notably:
-	  - AMD64 support to insmod-busybox, minilibc, et al.
-	  - Sync with insmod-modutils 2.4.19 something but everyone should use
-	dietlibc nowadays
-	  - Factor out compilation and prefix with $(DIET) for dietlibc builds
-	  - 64-bit & varargs fixes
-
-	* mdk-stage1/stdio-frontend.c: typo from post-rereading
-	Merge from R9_0-AMD64, most notably:
-	  - AMD64 support to insmod-busybox, minilibc, et al.
-	  - Sync with insmod-modutils 2.4.19 something but everyone should use
-	dietlibc nowadays
-	  - Factor out compilation and prefix with $(DIET) for dietlibc builds
-	  - 64-bit & varargs fixes
-
-	* mdk-stage1/dietlibc/threadsafe.sh, mdk-stage1/dietlibc/findcflags.sh:
-	add missing scripts
-
-	* mdk-stage1/dietlibc/libpthread/thread_key.c,
-	mdk-stage1/dietlibc/lib/puts.c, mdk-stage1/dietlibc/lib/memccmp.c,
-	mdk-stage1/dietlibc/libcruft/entlib.c,
-	mdk-stage1/dietlibc/libcruft/grent.c, mdk-stage1/dietlibc/dirstream.h,
-	mdk-stage1/dietlibc/syscalls.s/ptrace.s,
-	mdk-stage1/dietlibc/lib/set_errno.c, mdk-stage1/dietlibc/lib/vprintf.c,
-	mdk-stage1/dietlibc/syscalls.s/sigaction.S,
-	mdk-stage1/dietlibc/libcruft/entlib.h, mdk-stage1/dietlibc/start.h,
-	mdk-stage1/dietlibc/lib/__xmknod.c, mdk-stage1/dietlibc/lib/alarm.c,
-	mdk-stage1/dietlibc/libcruft/pwent.c,
-	mdk-stage1/dietlibc/libstdio/fputc.c,
-	mdk-stage1/dietlibc/alpha/signal.S,
-	mdk-stage1/dietlibc/libdl/elf_hash.c, mdk-stage1/dietlibc/dietstdarg.h,
-	mdk-stage1/dietlibc/lib/speed.c,
-	mdk-stage1/dietlibc/syscalls.s/llseek.S,
-	mdk-stage1/dietlibc/lib/getservent.c,
-	mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
-	mdk-stage1/dietlibc/lib/errlist.c, mdk-stage1/dietlibc/lib/nop.c,
-	mdk-stage1/dietlibc/syscalls.s/signal.S,
-	mdk-stage1/dietlibc/libcruft/spent.c,
-	mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
-	mdk-stage1/dietlibc/libpthread/thread_internal.c,
-	mdk-stage1/dietlibc/alpha/sigprocmask.S,
-	mdk-stage1/dietlibc/lib/random.c,
-	mdk-stage1/dietlibc/syscalls.s/sigpending.S,
-	mdk-stage1/dietlibc/syscalls.s/exit.S,
-	mdk-stage1/dietlibc/syscalls.s/pwrite.S,
-	mdk-stage1/dietlibc/libugly/daemon.c,
-	mdk-stage1/dietlibc/libstdio/fgetc.c,
-	mdk-stage1/dietlibc/lib/vfprintf.c: even more removals
-
-	* mdk-stage1/dietlibc/dieticonv.h, mdk-stage1/dietlibc/dietlibm.h,
-	mdk-stage1/dietlibc/dyn_stop.c, mdk-stage1/dietlibc/binshstr.h,
-	mdk-stage1/dietlibc/linuxnet.h, mdk-stage1/dietlibc/parselib.h,
-	mdk-stage1/dietlibc/dietuglyweaks.h, mdk-stage1/dietlibc/dyn_start.c,
-	mdk-stage1/dietlibc/dietdns.h: latest missing files
-
-2003/06/04  Pixel  <pixel at mandrakesoft.com>
-
-	* fsedit.pm: allow specifying lv_name in auto_installs (not tested!)
-
-	* install_steps.pm: don't use framebuffer after install on i845 (even if
-	framebuffer works during install)
-	(this implies no graphical boot)
-
-	* diskdrake/interactive.pm, lvm.pm: allow choosing lv name (thanks to
-	Brian Murrell)
-
-2003/06/03  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/ja.po, share/po/vi.po, share/po/sq.po: updated
-	Estonien, Japanese, Albanian and Vietnamese po files
-
-2003/06/02  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Update
-
-2003/06/02  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: updated Spanish translations
-
-2003/05/31  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sr@Latn.po,
-	share/po/sq.po, keyboard.pm, share/po/it.po, share/po/nl.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po,
-	share/po/hu.po: changed the name of the russian phonetic layout
-
-2003/05/30  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* standalone/mousedrake, drakxtools.spec: add mouse test in non-embedded
-	mode (#2049)
-
-2003/05/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated Vietnamese file
-
-	* share/po/de.po: updated German file
-	updated Vietnamese file
-
-2003/05/28  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/isdn.pm: forgot to commit the new configuration step
-	  - remove isdn-light config (seen with isdn4net maintainer)
-	  - new step to keep old device configuration
-
-	* network/isdn_consts.pm: s/my/our/ to make perl_checker happy in isdn.pm
-
-2003/05/28  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* network/modem.pm: remove /dev/ttyS14 link by drakconnect.
-
-2003/05/28  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: grow MAX_ARP_RETRIES from 4 to 7 after erwan's
-	suggestion
-
-2003/05/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tg.po, share/po/id.po, share/po/ru.po, share/po/ro.po,
-	share/po/th.po, share/po/is.po, share/po/no.po, share/po/hr.po,
-	share/po/tr.po, share/po/ta.po, share/po/mt.po, share/po/sq.po,
-	share/po/it.po, share/po/nl.po, share/po/fi.po, share/po/he.po,
-	share/po/lt.po, share/po/lv.po, share/po/hu.po: updated Albanian file
-
-2003/05/28  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* network/isdn_consts.pm: fix isdndata export in stripped package
-
-2003/05/27  Daouda Lo  <daouda at mandrakesoft.com>
-
-	* any.pm: 
-	  - user name must begin with a letter but not with a number or - or _
-
-2003/05/27  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: updated Spanish translation
-
-2003/05/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/be.po, share/po/bs.po, share/po/gl.po, share/po/de.po,
-	share/po/br.po, share/po/cy.po, share/po/af.po, share/po/et.po,
-	share/po/az.po, share/po/da.po, share/po/ca.po, share/po/cs.po,
-	share/po/bg.po, share/po/ar.po, share/po/ga.po: updated Estonian file
-
-2003/05/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-0.5mdk
-	9.2-0.4mdk
-
-2003/05/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/uz.po, share/po/sk.po, share/po/wa.po, share/po/pt_BR.po,
-	share/po/sl.po, share/po/et.po, share/po/zh_TW.po, share/po/ja.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/sr@Latn.po, share/po/sq.po, share/po/uk.po, share/po/eu.po,
-	share/po/es.po, share/po/DrakX.pot, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/fi.po, share/po/pl.po, share/po/eo.po,
-	share/po/el.po: updated pot file
-
-2003/05/26  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: be perl_checker prototype compliant
-
-	* commands: use formatError to display the error message
-	(to have a better error message than "SCALAR(0x....) at ...")
-
-	* interactive/http.pm, interactive.pm, interactive/newt.pm: 
-	  - methods with no argument are not functions with no argument!
-	  - perl_checker fixes
-
-2003/05/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm: Added new toggle possibilities to the menu; use "en_US" for
-	US layout
-
-2003/05/23  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/network.pm: #3628 /etc/resolv.conf explicit rights set (by titi)
-
-2003/05/23  gbeauchesne
-
-	* any.pm, bootloader.pm: Kernel and initrd are now in /boot/efi/mandrake
-	on IA-64
-
-	* drakxtools.spec: Update changelog
-
-	* mdk-stage1/insmod-modutils/obj/Makefile: 
-	  -Wno-error on IA-64 too for insmod-modutils/obj
-
-	* install_gtk.pm, share/list.ia64: Clean-ups. Remove
-	/var/log/XFree86.0.log from filelist
-
-2003/05/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-	* share/po/ja.po: updated Japanese file
-
-2003/05/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/draksplash, network/network.pm, network/modem.pm,
-	standalone/draksec, install_steps.pm, handle_configs.pm,
-	standalone/drakautoinst, standalone/drakpxe, my_gtk.pm,
-	partition_table/sun.pm, install_steps_interactive.pm,
-	standalone/harddrake2, standalone/drakboot, standalone/drakTermServ,
-	standalone/net_monitor, standalone/drakbackup, partition_table/raw.pm,
-	partition_table.pm, interactive/http.pm, printer/main.pm,
-	security/msec.pm, diskdrake/interactive.pm, partition_table/bsd.pm,
-	standalone/fileshareset, standalone/drakfloppy, standalone/drakfont,
-	standalone/drakconnect, standalone/drakgw, interactive/gtk.pm,
-	standalone/drakbug, standalone/drakperm, fsedit.pm, .perl_checker,
-	printer/printerdrake.pm: perl_checker fixes
-
-	* drakxtools.spec: next release
-
-	* standalone/drakfirewall: please perl_checker
-
-	* standalone/logdrake: perl_checker fixes
-	perl_checker fixes
-
-2003/05/22  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/05/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	pot file
-
-2003/05/22  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: Fix differntial user file naming.
-
-2003/05/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* printer/printerdrake.pm: better english (#1342)
-
-	* standalone/draksplash, standalone/logdrake: gtk+-2 specs prohibid
-	playing with policy
-
-	* drakxtools.spec: 9.2-0.3mdk
-	next 9.2-0.3mdk bits
-	fix #3485
-
-	* network/netconnect.pm: kill some warnings catched by diagnostics pragma
-
-	* standalone/drakconnect: gtk+-2 specs prohibid playing with policy
-	(build_list) simplify ip parsing
-	workaround #3341: display "Bad ip" instead of a blank field if ip
-	wasn't correctly parsed as an ip ?
-
-	* standalone/drakbug: do not mix interactive and ugtk2, let reusse
-	create_dialog()
-	do not set twice the title, ugtk2->new already do it for us
-	remove unused variable
-	gtk+-2 specs prohibid playing with policy
-	(quit_global) inline it
-	  - further clean gui construction through functionnal ugtk2
-	  - do not gratuitously add:
-	o " " around button labels
-	  o empty strings at end of kernel release
-	  - (parse_release) simplify
-	  - there's no need to keep a reference on field that we do not further
-	  use (distro release is parsed again when needed and kernel release
-	  is already stored in some variable)
-	  - do not pack nothing to widgets
-	  - simplify gui construction through create_packtable(), we really do
-	  not have to offuscate it like c programmers have to
-	  - one shall not be able to alter kernel or distribution release number
-
-	* harddrake/data.pm: do not fork usb module drivers list but reuse
-	list_modules one instead
-
-	* share/po/fr.po: update fr translation
-
-2003/05/21  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/network.pm: add some ip checking (#853)
-	remove old comments
-
-2003/05/21  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translations
-
-2003/05/21  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: fix gc sux in 1.117 modfiying function behaviour
-	gtktext_insert: fix indenting of one line, takes that as a
-	pretext to redo whole function identing without tabs
-	beautify titi
-
-2003/05/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/be.po, share/po/uk.po, share/po/bg.po, share/po/sr.po,
-	share/po/ru.po: put "yawerty" in cyrillic for languages using cyrillic
-	alphabet
-
-2003/05/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.2-0.3mdk's first bits (more to com tomorrow)
-
-	* standalone/drakboot: we already have fork()+exec() detect_loader, so
-	there's no need to do
-	it again
-
-	* standalone/harddrake2: remove unused function that should never have
-	come to live
-	  - help menu items are not checkable
-	  - do not display spurious "/" on menu buttons when embedded
-	  - (strip_first_underscore) let speedup the regexp
-
-	* printer/gimp.pm: please gc
-
-	* ugtk2.pm (gtktext_append) fix gtktext_insert() call
-
-2003/05/20  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Partially updated
-
-2003/05/20  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* modules/interactive.pm: fix BUG 2530, no more spurious window when
-	insmoding fail
-
-	* network/ethernet.pm: #763 #2336 fix alias in modules.conf
-	perl_checker compliant
-
-2003/05/20  keld
-
-	* share/po/da.po: Updates
-	gi/perl-install/share/po/da.po
-
-2003/05/20  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po, share/po/fi.po, share/po/de.po: updated pot file
-	updated German, Estonian and Finnish files
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/lt.po, share/po/he.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/bs.po, share/po/uz.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sr@Latn.po, share/po/sq.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/eo.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po,
-	share/po/hu.po: updated pot file
-
-2003/05/20  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/scannerdrake (removeverticalbar) pixelate
-	perl_checker fixes
-
-	* Xconfig/xfreeX.pm: perl_checker fix
-
-	* common.pm (set_permissions): owner and group are optional parameters
-
-	* printer/gimp.pm: typo fix
-	(pop_spaces) prevent infinite loop
-	(addprinter,isprinterconfigured): remove temp variables
-
-	* drakxtools.spec: 9.1-0.2mdk
-	distriblint fix
-	one last fix
-	further bits for 9.2-0.1mdk
-	first bits of 9.2-0.1mdk
-
-	* printer/printerdrake.pm: 
-	  - perl_checker fixes, which show up the following bugs:
-	  - printer::printerdrake::{setup_smb,setup_socket}(): do not use undef
-	  values, but reuse those we just calculate
-	  - printer::printerdrake::main(): fix printer::default::printer_type()
-	  callee
-	
-	  - printer::printerdrake::check_network(): fix
-	  network::netconnect::main() callee
-
-	* network/nfs.pm (find_servers): chomp is uneeded
-	(find_exports) better behavior when regexp does not match
-
-	* standalone/harddrake2: better explanation of the wp field
-
-	* standalone/draksplash: perl_checker fixes
-
-	* printer/detect.pm, standalone/printerdrake: perl_checker fixes
-	printer::printerdrake::{setup_smb,setup_socket}(): do not use undef
-	values, but reuse those
-	we just calculate
-	printer::printerdrake::main(): fix printer::default::printer_type()
-	callee
-
-	* my_gtk.pm: fix #3952: do not pass extra argument (gc altered
-	common::take_screenshot() api in r1.172 but forget to alter all
-	callees)
-
-	* standalone/drakfont: try to simplify
-	(put_font_dir): $/variable is unlikely what was initially intended
-	(chk_empty_xfs_path): typo fix
-	(search_dir_font_uninstall): further simplify
-	(chk_empty_xfs_path):
-	  - any { !cdt} equals to every { cdt }
-	  - if_ is unneeded
-	
-	(search_dir_font_uninstall) map { if_(cdt, $_ } equals to grep { cdt }
-	(file_ok_sel) prevent potential crash in perl regexp engine if sg bad
-	happenned in the translation
-	fix #3960: divide by zero execption
-
-	* security/msec.pm: 
-	  - fix #3616 (draksec discarding changes)
-	  - add a end of line btw at the end of file to please cat
-
-	* standalone/drakedm: fix #1743: offer to restart the dm service
-
-	* printer/main.pm: perl_checker fixes
-	printer::printerdrake::{setup_smb,setup_socket}(): do not use undef
-	values, but reuse those
-	we just calculate
-	printer::printerdrake::main(): fix printer::default::printer_type()
-	callee
-	prevent set_usermode() vs set_cups_autoconf() conflict
-	restore service restart
-
-	* .perl_checker: check again printerdrake, this would have prevent whoever
-	altered
-	network::netconnect::main() to forget some calle when updating all
-	calle for new parameters signature :-(
-
-	* bootloader.pm: for whatever reason, the second part of
-	detect_bootloader()
-	consolidation didn't make up into the cvs
-
-	* modules.pm (probe_category): one regexp is enough for isdn
-
-	* share/po/fr.po: update french translation
-
-2003/05/19  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: updated Spanish translations
-
-2003/05/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* printer/gimp.pm (gimp::pop_spaces): consolidate skipping of lines that
-	are space ended
-	perl_checker fixes
-
-	* any.pm: in standalone drakboot, raise a wait message window so that the
-	user can figure
-	out what occurs (lilo installation being quite long)
-
-	* bootloader.pm: fix #3560 (drakboot not updating bootloader label): the
-	only confusing
-	bug is that when one come back to drakboot main window after having
-	altered the bootloader, the main window still list the old bootloader
-	as the current bootloader.
-	let update this label.
-	btw consolidate bootloader detection in bootloader::detect_bootloader()
-	further fix #2826 (lilo failling to handle entry with spaces): replace
-	spaces by underscores in labels (image names are not likely to contain
-	spaces) to prevent the error
-	when configuring to install grub bootloader, we first install lilo, then
-	grub.
-	
-	the logic is that we only reread /etc/lilo.conf[1], so we need to write
-	/etc/lilo.conf.  but when installing grub, we really do not need to run
-	lilo, we
-	only have to write its config file.
-	
-	[1] because grub/menu.lst lacks some data and because we do neither want
-	to
-	parse both config files nor to resolve conflicts between configuration
-	let further consolidate make_label_lilo_compatible()
-
-	* printer/main.pm: 
-	  - (read_location, rip_location): simplify loop condition since once we
-	get
-	$location_end, we exit it
-	  - (rip_location): simplify @location build when no existing one
-	  - (get_cups_autoconf, set_cups_autoconf, get_usermode, set_usermode):
-	simplify
-	  a lot through getVarsFromSh() and setVarsInSh()
-	
-	  - (set_jap_textmode) simplify a lot through substInFile()
-	
-	now all /etc/sysconfig/printing accesses get done by MDK::Common::File
-	(until
-	shell template from libconf is used)
-	perl_checker fixes
-
-	* standalone/logdrake: dialog window is already modal
-
-	* printer/cups.pm, printer/detect.pm, printer/office.pm,
-	printer/default.pm, printer/services.pm, printer/printerdrake.pm:
-	perl_checker fixes
-
-	* standalone/drakboot: fix #3560 (drakboot not updating bootloader label):
-	the only confusing
-	bug is that when one come back to drakboot main window after having
-	altered the bootloader, the main window still list the old bootloader
-	as the current bootloader.
-	let update this label.
-	btw consolidate bootloader detection in bootloader::detect_bootloader()
-
-	* network/network.pm: move expert stuff under the "advanced" button like
-	in all other drakx/drakxtools code
-
-	* network/nfs.pm: do not drop return values from regexp but use them to
-	ensure we do not
-	reuse capture buffers from previous one, which is really bad and
-	trully buggy
-
-	* lang.pm: %langs: first column is supposed to be localized in english
-
-	* standalone/drakconnect: some drakconnect cleanups
-
-	* standalone/lsnetdrake: simplify
-
-	* standalone/harddrake2: localize drive capabilites (aka burning, dvd
-	managment, ...)
-
-	* drakxtools.spec: add a bug reference
-	last 9.1-38mdk bits
-	update perl-gtk0 users list (drakcronat being ported to gtk+2)
-
-	* install_steps.pm: fix network::netconnect::save_conf() callee
-
-2003/05/16  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm: add a step to warn user before writing settings
-	(bug #852 and so)
-
-2003/05/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sr@Latn.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	pot file
-
-2003/05/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk2.pm: perl_checker fix
-
-	* network/isdn_consts.pm: let it work
-
-	* drakxtools.spec: first bits of 9.1-38mdk
-
-2003/05/15  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Typo fix
-
-2003/05/15  keld
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-
-2003/05/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po, share/po/DrakX.pot: updated pot file
-
-2003/05/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* ugtk.pm: mark it as deprecated
-
-	* standalone/harddrake2: 
-	  - describe wp flag on ia32 cpus
-	  - make all field descriptions begin by a lower case letter
-	  - (create_dialog) :
-	o options are passed through a hash ref
-	  o wrap text
-	  o update caller list
-	  - harddrake2: convert to use create_dialog() instead of
-	interactive->warn
-	  (fix #3487)
-
-	* standalone/drakfont (create_dialog) :
-	  - update caller list
-	  - add title parameter and update callers
-	remove unused variable
-	do not use interactive to get root capabilties, directly use
-	require_root_capability()
-	fix #1352 : do not add buggy font directories
-	hide "mode switch" buttons to only enable to switch to the other mode,
-	not the current one
-
-	* ugtk2.pm (create_dialog) scroll window if needed
-	  - (create_dialog) :
-	o options are passed through a hash ref
-	  o wrap text
-	  o update caller list
-	  - harddrake2: convert to use create_dialog() instead of
-	interactive->warn
-	  (fix #3487)
-	(create_dialog) :
-	  - update caller list
-	  - add title parameter and update callers
-
-	* standalone/drakfloppy (create_dialog) :
-	  - update caller list
-	  - add title parameter and update callers
-
-	* harddrake/data.pm: bump version
-
-	* drakxtools.spec: 
-	  - 9.1-37mdk
-	  - bump require in order to help rpm to update for new autoreq
-
-2003/05/14  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Some fixes and so...
-	Updated partially
-
-2003/05/14  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* bootloader.pm: perl_checker fixes
-
-	* standalone/drakfont: 
-	  - uninline poulpy
-	  - use map instead of foreach in some places
-	  - (chk_empty_xfs_path): replacing foreach by map make obvious that we
-	  don't have to grep all items, grep will be enough
-	
-	  - (put_font_dir): consolidate some code into convert_fonts; this make
-	  obvious there were some bug due to $/varname typo; this also reduce
-	  the message to translate ammount
-
-2003/05/13  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakTermServ: perl_checker cleaning
-
-2003/05/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakedm: perl_checker fix
-
-	* .perl_checker: ignore URPM::Resolve until francois qiet it down
-
-	* standalone/drakperm: better use get instead of _get
-
-	* network/netconnect.pm: 
-	  - gtkcreate_img is exported by helpers tag in ugtk2
-	  - add a bug note: write_on_pixmap() is only in my_gtk, not in ugtk2 !
-
-	* standalone/drakbug: make option managment look like real perl
-
-	* standalone/drakgw: perl_checker fixes
-
-	* Xconfig/main.pm (configure_everything_or_configure_chooser) keyboard and
-	mouse
-	paremeters really are optional, Xconfig::default::configure() handle
-	the fact they're undefined for us
-
-	* standalone/drakboot: let ugtk2->new manage the title setting
-
-	* standalone/drakfont: better use s/_get/get/ and {get,set}_fraction
-	instead of ->fraction
-	helper
-
-	* standalone/drakconnect: 
-	  - remove 80% of perl_checker warnings
-	  - gtkbuttonset is not exported by ugtk2
-
-	* standalone/drakTermServ: cleanups
-
-	* standalone/drakfloppy: 
-	  - add empty prototypes to help perl_checker
-	  - has_sub_trees: better use ||
-
-	* standalone/drakxtv: help perl_checker by providing an empty prototype
-
-2003/05/12  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/isdn.pm: s/@isdn::isdndata/@isdndata/
-
-2003/05/12  Pixel  <pixel at mandrakesoft.com>
-
-	* interactive.pm: have the "Ok" in ask_from__add_modify_remove return true
-	in default mode (eg: newt)
-
-	* standalone/diskdrake: add "--list-hd" to please gbeauchesne
-
-2003/05/12  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: perl_checker compliance, differential mode
-	option, explain adding directories
-
-2003/05/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* any.pm: use matched values only if matching did success
-
-	* drakxtools.spec: help auto-provides
-	9.1-36mdk
-
-	* standalone/drakboot: 
-	  - pass enough dummy parameters to fs::merge_info_from_fstab
-	  - add empty prototypes to help perl_checker catch miss writeen func
-	calls
-	  - do not log localized messages; what's more, this is supposed to be
-	  already logged by standalone
-	  - in testing mode:
-	  o do not enforce the need for bootsplash
-	  o do not really run mkinitrd
-	  - if bootsplash miss, we should just go back to main config window
-
-2003/05/10  keld
-
-	* share/po/da.po: updates
-	gi/perl-install/share/po/da.po
-
-2003/05/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/he.po: updated Hebrew file
-
-2003/05/07  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - follow new network::netconnect::save_conf signature
-	  - remove call to network::netconnect::set_net_conf, no longer exist
-
-	* network/netconnect.pm: 
-	  - configuration stuff
-	. rewrite sub save_conf, new signature is ($netcnx)
-	 . rewrite sub load_conf, connection type stored in
-	/etc/sysconfig/drakconnect
-	 . remove sub read_raw_net_conf
-	 . shrink sub read_net_conf
-	  - drop if ($nb < 1 ), useless
-	  - perl_checker
-
-	* network/isdn.pm: s|/sbin/isdnctrl|/usr/sbin/isdnctrl|
-
-2003/05/06  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: More entries
-
-2003/05/06  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/netconnect.pm: 
-	  - remove sub intro
-	  - change sub main signature
-	  - drop !$::isWizard code
-	  - perl_checker
-
-	* network/tools.pm: 
-	  - drop !$::isWizard code
-	  - perl_checker
-
-	* standalone/drakconnect: 
-	  - drop !$::isWizard code
-	  - change netconnect::main signature
-	  - change network::modem::ppp_configure signature
-	  - perl_checker
-	  - cleanup
-
-	* install_steps_interactive.pm: change network::netconnect::main signature
-
-2003/05/06  erwan
-
-	* drakxtools.spec: Fix changelog
-
-2003/05/06  gbeauchesne
-
-	* standalone/drakboot: Fix drakboot booloader methods for ia64 and amd64
-
-2003/05/06  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* keyboard.pm, share/po/sp.po, pixmaps/langs/lang-sh.png, lang.pm,
-	share/po/sr.po, share/po/sr@Latn.po, pixmaps/langs/lang-sp.png: Renamed
-	Serbian po files to follow standard (sr -> cyrillic, sr@Latn -> latin).
-	'sh' is used internally by DrakX for identifier by DrakX; and 'sh_YU'
-	used as locale name, for latin Serbian, to avoid use of '@' character
-	which may be problematic in some cases.
-
-	* share/po/ru.po, share/po/he.po: updated Hebrew and Russian files
-
-2003/05/06  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: crash on add other files
-	fix disabled incremental other files checkbox
-	fix lack of incremental backups of other files
-	fix broken daemon mode
-	fix file remove issue
-	I know it fails perl_checker - require ugtk2 never returns on console
-
-2003/05/05  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/ethernet.pm: perl_checker fixes
-
-	* network/adsl.pm: 
-	  - remove unused $intf in adsl_probe_info and adsl_ask_info
-	  - perl_checker fixes
-
-	* network/netconnect.pm: 
-	  - change configure and winmodemConfigure args (due to $intf drop)
-
-	* network/modem.pm: 
-	  - drop unused $intf in configure and winmodemConfigure
-	  - fix winmodem configuration behavior
-	  - perl_checker
-
-2003/05/02  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* network/ethernet.pm: fix typo
-
-	* network/netconnect.pm, network/tools.pm, network/network.pm:
-	perl_checker fixes
-
-	* standalone/drakfont: fix sucky fonction (thanks to master guillaume)
-
-2003/04/30  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakfont: more perl_checker compliant
-
-2003/04/30  gbeauchesne
-
-	* partition_table.pm: Revert XFS support, not stable enough especially on
-	SMP
-
-2003/04/30  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* any.pm: have /etc/sysconfig/i18n in report.bug
-
-	* ugtk2.pm: remove export for two removed functions
-
-2003/04/30  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/zh_CN.po: Changed charset encoding
-
-2003/04/30  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps.pm, http.pm, detect_devices.pm, network/isdn.pm,
-	interactive.pm, Xconfig/resolution_and_depth.pm, c.pm,
-	partition_table/sun.pm, network/adsl.pm, swap.pm, pkgs.pm, lang.pm,
-	install2.pm: perl_checker compliance
-
-2003/04/30  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake: perl_checker fix
-
-	* drakxtools.spec: 9.1-35mdk
-
-	* standalone/drakfont: 
-	  - no non empty prototypes
-	  - s/sub { one func call }/code ref/
-	perl_checker fixes
-
-	* ugtk2.pm (create_dialog):
-	  - second parameter really is optionnal
-	  - do not blindly set the title to logdrake, this is used elsewhere
-
-	* security/level.pm: fix #3618
-
-	* scanner.pm, standalone/drakperm, standalone/drakbug: perl_checker fixes
-
-2003/04/29  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated partially
-
-2003/04/29  Damien Chaumette  <dchaumette at mandrakesoft.com>
-
-	* standalone/drakfont: more perl_checker friendly
-	empty install list at cancel
-	prevent void list installation
-
-2003/04/29  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: perl_checker can parse me at last
-
-2003/04/29  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakboot: no doble module loading
-
-	* modules.pm (get_parameters) perl-ize
-
-	* drakxtools.spec: 9.1-34mdk
-
-	* standalone/drakedm: fix #3701: return back to the display managers menu
-	if one cancel the
-	installation of the required packages
-
-2003/04/28  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* rescue/list.i386: add resize_reiserfs
-
-2003/04/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bg.po, share/po/he.po: updated Hebrew and Bulgarian files
-
-2003/04/26  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-2003/04/24  gbeauchesne
-
-	* drakxtools.spec: 1.1.19-56mdk
-
-2003/04/24  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/various.pm, Xconfig/card.pm, standalone/draksec, scanner.pm,
-	install_steps.pm, diskdrake/removable.pm, network/isdn.pm,
-	interactive.pm, c.pm, partition_table/gpt.pm, resize_fat/directory.pm,
-	install_steps_interactive.pm, network/netconnect.pm, mouse.pm,
-	standalone/harddrake2, devices.pm, lang.pm, lvm.pm, install2.pm,
-	raid.pm, crypto.pm, diskdrake/smbnfs_gtk.pm, commands.pm, ugtk2.pm,
-	partition_table.pm, any.pm, loopback.pm, Xconfig/xfree3.pm,
-	sbus_probing/main.pm, interactive/http.pm, diskdrake/interactive.pm,
-	interactive/stdio.pm, pkgs.pm, interactive/newt.pm, harddrake/sound.pm,
-	services.pm, security/level.pm, fs.pm, install_messages.pm,
-	install_steps_auto_install.pm, harddrake/data.pm, keyboard.pm,
-	diskdrake/hd_gtk.pm, Xconfig/monitor.pm, fsedit.pm, modules.pm,
-	common.pm, detect_devices.pm, network/tools.pm, network/shorewall.pm,
-	install_any.pm, timezone.pm: perl_checker adaptations + fixes
-
-2003/04/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: fix conflict with perl-Locale-gettext
-
-2003/04/23  gbeauchesne
-
-	* share/list.x86_64, rescue/list.x86_64, partition_table.pm: add xfs for
-	amd64
-
-2003/04/23  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* rescue/list: file-4.02
-
-2003/04/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/tg.po, share/po/uz.po, share/po/sk.po, share/po/ru.po,
-	share/po/ro.po, share/po/wa.po, share/po/pt_BR.po, share/po/th.po,
-	share/po/sl.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/tr.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/sq.po,
-	share/po/uk.po, share/po/pl.po, share/po/sr.po, share/po/sv.po,
-	share/po/sp.po, share/po/help-it.pot: updated pot file
-
-2003/04/23  Pixel  <pixel at mandrakesoft.com>
-
-	* help.pm: add prototypes
-
-	* share/po/help_xml2pm.pl: add prototypes to help.pm
-
-2003/04/23  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.1-32mdk
-	  - localedrake is part of drakxtools-newt, so does its menu entry (and
-	sanitize its entry btw)
-	  - drakxtools-newt: add the needed post and postun macros
-	  - sort provides'n obsoletes, add missing drakfloppy
-
-	* share/po/fr.po: update french translation
-
-2003/04/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/et.po: updated pot file
-	updated pot file
-
-	* share/po/bs.po, share/po/id.po, share/po/gl.po, share/po/br.po,
-	share/po/is.po, share/po/no.po, share/po/af.po, share/po/az.po,
-	share/po/ja.po, share/po/hr.po, share/po/mt.po, share/po/fr.po,
-	share/po/ga.po, share/po/nl.po, share/po/it.po, share/po/be.po,
-	share/po/eu.po, share/po/es.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/fi.po, share/po/de.po, share/po/lt.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/eo.po,
-	share/po/lv.po, share/po/bg.po, share/po/cs.po, share/po/el.po,
-	share/po/hu.po, share/po/ar.po: updated pot file
-
-2003/04/22  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix typos and cleanup syntax
-
-	* install_any.pm: perl_checker compliance for optional method arguments
-	fix bug #3652 (grub must be installed for a loopback install)
-
-	* share/po/help_xml2pm.pl, help.pm: fix typo (help.pm must return a true
-	value)
-	per Pablo's request:
-	  - create a mini header in the generated help-*.pot files
-	  - guilabel, guibutton and guimenu now uses %s to separate more cleanly
-	what
-	comes is doc and what is gui text
-	!! the new generated help.pm has a different interface, non-backward
-	compliant !!
-
-	* Xconfig/xfree3.pm, Xconfig/xfreeX.pm, install_steps_gtk.pm,
-	Xconfig/xfree.pm: perl_checker compliance for optional method arguments
-
-	* interactive.pm: perl_checker compliance for optional method arguments
-	adapt to new help.pm
-
-	* share/po/help-fr.pot, share/po/help-de.pot, share/po/help-ru.pot,
-	share/po/help-es.pot, share/po/help-it.pot: per Pablo's request:
-	  - create a mini header in the generated help-*.pot files
-	  - guilabel, guibutton and guimenu now uses %s to separate more cleanly
-	what
-	comes is doc and what is gui text
-	!! the new generated help.pm has a different interface, non-backward
-	compliant !!
-
-2003/04/22  tpittich
-
-	* share/po/sk.po: fixed slovak translation (thanks to Stanislav Visnovsky
-	and Zdenko Podobny)
-
-2003/04/22  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: array costs less than a hash
-
-	* drakxtools.spec: 9.1-31mdk
-
-2003/04/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po: updated Italian file
-
-2003/04/21  Pixel  <pixel at mandrakesoft.com>
-
-	* keyboard.pm: 'Option "XkbCompat" "group_led"' is no good because
-	it means that effectively NO other compatibility settings
-		  are included i.e. NONE of standard XFree86 keys work,
-		  including Ctrl-Alt-Fx, Ctrl-Alt-KP+, Ctrl-Alt-KP- etc.
-	'Option "XkbCompat" "default+group_led"' is much better
-	(thanks Andrey Borzenkov)
-
-	* share/rpmsrate: have bison and flex installed when DEVELOPMENT is chosen
-	(thanks to Adam
-	Williamson)
-
-2003/04/18  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_any.pm: make all CD as update (as it should have been to allow
-	updates to be resolved).
-
-2003/04/17  gbeauchesne
-
-	* share/list.x86_64: Add raid & reiserfs tools
-
-	* drakxtools.spec: Use RPM_OPT_FLAGS when compiling tools
-	(rpcinfo-flushed)
-	1.1.9-55mdk
-
-	* tools/Makefile: Compile rpcinfo-flushed/xhost+ with -Os so that code
-	size is reduced
-	and magically fixed on hammer. ;-)
-
-2003/04/17  Pixel  <pixel at mandrakesoft.com>
-
-	* fs.pm: another perl_checker optional parameter compliance
-	new perl_checker compliance
-
-	* Xconfig/various.pm, network/network.pm, network/modem.pm,
-	security/various.pm, standalone/draksec, partition_table/dos.pm,
-	scanner.pm, install_steps.pm, Xconfig/parse.pm, network/isdn.pm,
-	interactive.pm, resize_fat/directory.pm, install_steps_interactive.pm,
-	network/netconnect.pm, Xconfig/xfreeX.pm, mouse.pm, devices.pm, lang.pm,
-	resize_fat/boot_sector.pm, network/drakfirewall.pm,
-	modules/interactive.pm, standalone/diskdrake, crypto.pm,
-	Xconfig/main.pm, diskdrake/smbnfs_gtk.pm, install_interactive.pm,
-	partition_table/raw.pm, ugtk2.pm, partition_table.pm, any.pm,
-	install_steps_gtk.pm, partition_table/mac.pm, ftp.pm,
-	diskdrake/interactive.pm, pkgs.pm, interactive/newt.pm,
-	network/ethernet.pm, Xconfig/resolution_and_depth.pm, bootloader.pm,
-	diskdrake/hd_gtk.pm, Xconfig/monitor.pm, fsedit.pm,
-	partition_table/lvm_PV.pm, modules.pm, common.pm, detect_devices.pm,
-	standalone/drakupdate_fstab, install_any.pm, timezone.pm: new
-	perl_checker compliance
-
-2003/04/16  gbeauchesne
-
-	* mdk-stage1/insmod-busybox/Makefile: 
-	  - Update to busybox 0.65.0 version
-	  - Add support for x86-64
-	Use $(DIET) wrapper
-
-	* mdk-stage1/insmod-busybox/insmod.c, mdk-stage1/insmod-busybox/Config.h,
-	mdk-stage1/insmod-busybox/busybox.h: Fixes. Don't care about taint
-	stuff. Constify a little so that some dead
-	branches could be nuked. -> Reduce code size by 5 KB.
-	  - Update to busybox 0.65.0 version
-	  - Add support for x86-64
-	Merge back fixes from HEAD but don't use the init_module() et al. tricks
-	since correct dietlibc 0.22 is used on the branch.
-	  - Update to insmod from busybox 0.65.0
-	  - Add support for x86-64
-
-	* mdk-stage1/insmod-busybox/README: Update README
-
-	* mdk-stage1/Makefile: use insmod-busybox on x86-64, save around 50 KB.
-	;-)
-
-2003/04/16  Pixel  <pixel at mandrakesoft.com>
-
-	* ugtk2.pm: comply to new each_index behaviour
-
-2003/04/16  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakconnect: fix #1675: swap the text and button widgets
-
-2003/04/15  gbeauchesne
-
-	* detect_devices.pm: Fix hasSMP()
-
-	* install_any.pm: CD-ROM installations use cdrom.img on x86-64 nowadays
-
-2003/04/15  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/harddrake2: add hint for translators
-
-2003/04/14  gbeauchesne
-
-	* harddrake/data.pm: fix harddrake doesn't display unknow hardware (tv,
-	9.0 updates)
-
-	* mdk-stage1/dhcp.c, docs/README, mdk-stage1/tools.c, mdk-stage1/stage1.h:
-	Handle "netauto" mode (gc, post 9.1)
-
-	* drakxtools.spec: Match current 9_0-64bit-branch state
-
-2003/04/14  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c, mdk-stage1/tools.c, mdk-stage1/stage1.h: put dhcp
-	bootfile under netauto parameter
-
-2003/04/11  dam's  <dams at idm.fr>
-
-	* standalone/drakconnect: corrected titi typo
-
-2003/04/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/th.po: changed "reboot" to latin letters, as requested.
-
-2003/04/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/drakboot: any::setupBootloader() already call
-	bootloader::install()
-
-	* standalone/drakedm: it was designed in 2003, not 2002
-
-2003/04/07  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: first bits of 9.1-31mdk
-	fix harddrake menu entry description
-
-	* standalone/drakboot: fix #2826 (aka pixel sucks):
-	pixel changed the booloader module api by throwing an exception
-	instead of using the ugly /tmp/.error temporary file and altered drakx
-	callers but forget to update standalone/* callers (aka drakboot).
-	now, with this patch, any error during lilo/grub installation is
-	catched and displayed, which is more generic than checking for spaces.
-
-2003/04/04  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* docs/README: some fixes and improvements
-
-	* docs/HACKING: some updates
-
-2003/04/04  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: bump gtk2-perl require because of #3633
-	9.1-30mdk
-
-	* scanner.pm: fix doble explanation logging of scannerdrake and harddrake
-	startup
-
-	* standalone/logdrake: 
-	  - perl_checker fixes
-	  - ensure only one callback do regular parsing
-
-	* standalone/drakfloppy: fix crash on floppy generation reported by
-	Francisco Alcaraz
-
-2003/04/03  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Updated
-
-2003/04/03  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: after adding gtk_text_buffer_place_cursor in gtk2-perl, use it
-	here :)
-	fix #3633 (cursor at the end of TextView after gtktext_insert)
-	remove a few memory leaks
-
-	* drakxtools.spec: after adding gtk_text_buffer_place_cursor in gtk2-perl,
-	use it here :)
-
-2003/04/02  gbeauchesne
-
-	* detect_devices.pm: Update to match IA-64 ACPI format string "XXX CPUs
-	available"
-
-2003/04/02  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* patch/9.1/patch-loopback.pl: Error scenario: When using a file for your
-	/ (a "loopback"), booting your newly
-	installed system will fail with a kernel panic with flashing keyboard
-	lights
-	Why: The initrd needs to load the loop.o module to mount your /
-	partition; but
-	since recently, loop.o depends on aes.o, and since mkinitrd doesn't
-	handle
-	dependencies automatically and we didn't notice that change, we didn't
-	update
-	mkinitrd accordingly
-	Solution: Format a floppy disk with a DOS filesystem (in Linux, you can
-	use the
-	command "mkdosfs /dev/fd0"). Copy patch.pl to the floppy disk. Remove
-	the floppy
-	and reboot using the Mandrake Linux 9.1 CD1 to do a CD-ROM installation.
-	During
-	boot, press F1 at the splash screen, then place your floppy disk that
-	contains
-	patch.pl in the floppy drive. At the prompt, type "patch", then follow
-	the
-	installation as usual.
-	
-	see bugzilla #3614
-
-2003/04/02  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2003/04/02  Pixel  <pixel at mandrakesoft.com>
-
-	* patch/9.1/patch-detectSMP-K6.pl: Error scenario: On a AMD-K6, install
-	fails after the formatting partitions steps with a strange "type read"
-	error
-	Why: in some cases, the SMP detection code fails and force the install
-	to exit
-	Solution: Use patch.pl which disables SMP detection
-	(thanks to Angela Bayley)
-
-2003/04/02  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/logdrake: remove unused variable
-	  - various perl_checker "fixes"
-	  - (logcolorize): make it saner regarding its arguments, thanks
-	perl_checker
-
-	* harddrake/sound.pm: hackism to shut up perl_checker
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, standalone/drakTermServ,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/lt.po, share/po/he.po, share/po/sp.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/tg.po,
-	share/po/bs.po, share/po/uz.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sq.po, share/po/it.po, share/po/nl.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po,
-	share/po/hu.po: s/initrdrd/initrd/ (Arpad Biro)
-
-	* standalone/harddrake2: fix pablo patch that broke two translations
-	(reported by Arkadiusz
-	Lipiec)
-
-2003/04/01  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* rescue/tree/etc/oem-all: added restore into boot_entries default value,
-	increased hd install size from
-	1500 MB to 2500 MB to include current ackbar cooker repository.
-
-2003/04/01  gbeauchesne
-
-	* bootloader.pm: Indentation fixes
-
-	* install_steps_gtk.pm: Pass $Driver to launchX in non /FB/ case
-	Pass $Driver to launchX in non /FB/ case
-	Backport from 9.1 xf4 fallbacking to fbdev driver
-
-	* install_steps.pm: Remove MAKEDEV workaround for ia64. Fixes must be
-	found, and kernel nowadays
-	have devfs support.
-
-	* install_gtk.pm: Backport from 9.1 xf4 fallbacking to fbdev driver
-
-2003/04/01  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* lang.pm: misc
-
-2003/04/01  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/logdrake (parse_file) pass explicit argument instead of
-	relying on lexical $_
-	being correct in that context (worked fine but this is bad)
-
-	* share/po/fr.po: 
-	  - fix fscking french translation
-	  - explain why it's bad to translate this way
-
-	* standalone/draksound, install_steps_interactive.pm: move
-	harddrake::sound $index param in hash and pass only the hash ref around
-	functions
-
-	* ugtk2.pm: perl_checker fixes
-
-	* standalone/harddrake2: 
-	  - fix fscking french translation
-	  - explain why it's bad to translate this way
-	  - prevent translators to do bad things (that is having badly
-	constructed
-	strings on screen)
-	  - reuse some translations instead of relying on extracting tools'
-	merge
-	  feature
-	  - give translators more control on about window text
-
-	* harddrake/sound.pm: propagate $in where needed
-	move harddrake::sound $index param in hash and pass only the hash ref
-	around
-	functions
-
-	* standalone/drakhelp: simplify
-
-2003/03/31  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Typo fix
-
-2003/03/31  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* bootloader.pm: copy kernel and stage1 in order to avoid remapping
-	/mnt/hd on the fly during
-	install for bootloader installation to complete correctly.
-	fixed regex for kernel options retrieved for restore bootloader entry.
-
-2003/03/31  keld
-
-	* share/po/da.po: spelling errors
-	po/po/da.po gi/perl-install/share/po/da.po
-
-2003/03/31  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/vi.po: updated Vietnamese file
-
-	* share/po/fr.po: fixed a bad grammatical error
-
-2003/03/30  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* lang.pm: clean
-
-2003/03/30  keld
-
-	* share/po/da.po: spelling errors
-	soft/menu-messages/da.po gi/perl-install/share/po/da.po
-	some spelling errors
-	soft/control-center/po/da.po gi/perl-install/share/po/da.po
-
-2003/03/29  keld
-
-	* share/po/da.po: Updates
-	soft/GtkMdkWidgets/po/da.po gi/perl-install/share/po/da.po
-
-2003/03/28  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* lang.pm: disable arabic whic doesn't work well after install
-
-	* patch/9.1/hp.diff: disable arabic
-
-2003/03/28  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* lang.pm: Special cases for KDE to recognize zh_HK and zh_SG
-
-2003/03/28  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/card.pm: fix typo, grr...
-	also have DontVTSwitch for i845 (and i85x)
-	use option DontVTSwitch for i865
-
-	* drakxtools.spec: use ServerFlags DontVTSwitch for i845, i865 and i85x
-	use ServerFlags DontVTSwitch for i865
-
-2003/03/27  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sq.po: updated Albanian file
-
-	* share/po/ja.po: updated Japanese file
-
-2003/03/27  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* docs/9.1_errata.txt: 
-	  - mcc erratas
-	  - lexical ordering
-
-2003/03/26  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_any.pm: moved hdInstallPath to any.pm.
-
-	* any.pm: removed acpi reference here (should already been have removed
-	earlier).
-	moved here hdInstallPath from install_any.
-
-	* standalone.pm: simplified code to allow parsing rpmdb instead of just
-	urpmi db.
-
-	* bootloader.pm: fixed another typo for adding restore entry (grub menu).
-	fixed wrong usage of any::hdInstallPath which is mapped as /tmp/image
-	during
-	installation.
-	fix typo on grub menu file read.
-
-	* rescue/tree/etc/oem-all: use fat32 instead of fat16, fixed
-	mandrake-release to install.
-	fix typo.
-	mandrake-release should be installed.
-	current parted does no more support fat fs but fat16 or fat32 fs.
-
-2003/03/26  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* docs/9.1_errata.txt: first drakxtools errata
-
-	* drakxtools.spec: fix harddrake menu entry
-
-2003/03/25  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sq.po: updated Albanian file
-
-2003/03/24  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* network/netconnect.pm: added modem configuration after LT Modem support.
-
-	* network/modem.pm: added login and password retrieval for ppp0 in
-	configure function.
-	propose /dev/modem before other device (as it will work for other most
-	case).
-	added modem configuration after LT Modem support.
-
-2003/03/24  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	Japanese file; updated pot file
-
-2003/03/24  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* any.pm, install_steps_interactive.pm: hp fix
-
-	* drakxtools.spec: 
-	  - fix changelog
-	  - 9.1-28mdk
-	first bits of 9.1-26mdk
-
-	* patch/9.1/hp.diff: more hp fixes
-	mdk9.1 changes for hp
-
-2003/03/23  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/sq.po: updated Italian and Albanian files
-
-2003/03/22  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/tr.po, share/po/pt.po: updated Italian,
-	Portuguese and Turkish files
-
-2003/03/21  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/ja.po: changed translation fo "mandrakesoft store"
-	changed "mandrakesoft-shouten" to "mandrakesoft-no shouten"
-	("store named mandrakesoft" -> "mandrakesoft's store")
-
-2003/03/21  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/service_harddrake: increase timeout from 5 to 25 seconds
-
-2003/03/20  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed typo.
-	add probe for netncx type in case of not already setted.
-
-2003/03/19  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: fix
-
-2003/03/19  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/tree/etc/oem-all: added support for passing
-	kernel options to oem scrpit.
-
-	* lang.pm: silently use en_US for arabic.
-	removed Arabic language (no correct font during install).
-	avoid displaying Hong Kong as a country.
-
-2003/03/19  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* docs/mdk-9.2: update, sort
-
-	* standalone/harddrake2: properly *both* reap zombies and clear status bar
-	message
-
-	* share/po/fr.po: 
-	  - fix harddrake2 main window title broken by stupid translators
-	  - explain the problem
-	  - explain how to easily get � and � caracters
-
-	* docs/9.1_errata.txt: first errate: ntfs kernel bug (bug and fix reported
-	by Szakacsits
-	Szabolcs)
-
-2003/03/18  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/tree/etc/oem-all: added lookup into
-	isolinux/alt0 if possible
-	updated ramdisk_size=128000 acpi=off
-
-2003/03/18  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-	* share/po/wa.po: corrected small typo
-
-2003/03/18  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: s/mplayer-guimplayer-gui/mplayer-gui/
-
-2003/03/17  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* install_steps.pm: reverted to 1.604
-
-2003/03/17  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/da.po: updated Danish and Italian files
-
-	* share/po/pt.po: updated Portuguese file
-
-	* share/po/ja.po: updated Japanese file
-
-2003/03/17  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: Add NVIDIA_nforce for smp and secure kernel
-	Fix NVIDIA_nforce entry removing kernel version (added by cleanrpmsrate)
-	FlashPlayer with a capital P
-
-2003/03/16  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bs.po, share/po/ro.po: updated Bosnian and Romanian files
-
-2003/03/16  Warly  <warly at mandrakesoft.com>
-
-	* drakxtools.spec: 26mdk to fix drakperm
-
-2003/03/15  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/bs.po, share/po/vi.po: updated Bosnian and Vietnamese files
-
-	* share/po/he.po: updated Hebrew file
-
-2003/03/15  Warly  <warly at mandrakesoft.com>
-
-	* install_steps.pm, share/rpmsrate, drakxtools.spec: fix a fatal error in
-	drakpem in editable mode
-
-	* standalone/drakperm: Fix fatal error in editable window when adding a
-	new entry
-
-2003/03/14  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/po/fr.po: Fix typo in french ads
-
-2003/03/14  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* standalone.pm: fix checking for installed kernel modules (for nvidia)
-	(/me sux)
-	(fix & changelog by pixel)
-
-	* share/rpmsrate: fixed error mandrake_doc
-	fixed gnupg using multiple rates.
-	fixed synthax error.
-
-	* install_steps_gtk.pm: made desktop group centred.
-
-2003/03/14  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* mdk-stage1/modules.c: fix myself sux: don't unconditionnally fgets
-	/proc/modules, because fopen
-	may have failed (the libc, in its great search for speed, probably
-	doesn't
-	care to check if the FILE* given to fgets is valid and opened)
-
-2003/03/14  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/po/is.po, share/po/el.po, share/po/he.po: updated Greek file
-
-	* share/po/zh_CN.po: updated Chinese file
-
-	* share/po/tr.po: updated Turkish file
-
-2003/03/14  Pixel  <pixel at mandrakesoft.com>
-
-	* drakxtools.spec: fix XFdrake handling NVidia proprietary drivers
-
-2003/03/14  Till Kamppeter  <till at mandrakesoft.com>
-
-	* drakxtools.spec: 9.1-23mdk
-
-2003/03/14  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: mandrake-galaxy doc link is broken if mandrake_doc is
-	not install. Waiting for a better solution install mandrake_doc via
-	rpmsrate in the same group as mandrake-galaxy.
-
-2003/03/13  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Fixed bug #417: '$' character in printer URI not
-	correctly handled.
-
-2003/03/13  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/main.pm: Fixed bug #417: '$' character in printer URI not
-	correctly handled.
-
-2003/03/13  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: updated Spanish translations
-
-2003/03/13  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_steps_gtk.pm: desktop group simplification.
-
-2003/03/13  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/ru.po, share/po/fi.po: updated Russian and Finnish files
-
-	* share/po/id.po, share/po/eo.po, share/po/cs.po, share/po/hu.po: updated
-	Czech, Esperanto, Indonesian and Hungarian files
-
-2003/03/13  Pixel  <pixel at mandrakesoft.com>
-
-	* any.pm: cleanup (still need to handle permissions more cleanly, people
-	using umask 0
-	should be shot)
-
-2003/03/13  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakTermServ: Fix IP pool range bug from gtk2 conversion.
-
-2003/03/13  Till Kamppeter  <till at mandrakesoft.com>
-
-	* scanner.pm: Bug fixes:
-	  - SHOWSTOPPER: SCSI scanners were never recognized as already
-	configured, the user was always asked whether he wants to configure
-	  them. Problem was that device files are symlinks.
-	  - Made most ISDN and ADSL devices not being considered as a scanner by
-	  Scannerdrake, SANE does not support internet scanners.
-
-2003/03/13  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/03/13  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: more logs
-	first 9.1-22mdk bits
-
-	* install_any.pm: alsa drivers are now named snd-<name> not anymore
-	snd-card-<name>
-
-	* any.pm: fix #3161 (ensure right permissions on /etc/sysconfig/autologin
-	for
-	bad root umask case)
-
-	* modules.pm: via via686 upgdrade after simplification too (next time
-	pixel told me
-	it's better to reuse some regexp, i kill him)
-	fix upgrade after simplification
-	simplify
-	convert alsa driver from old naming system to new one (snd-card-XXX =>
-	snd-XXX) and ensure correct upgrade for snd-via683 and snd-via8233
-	drivers
-
-	* docs/mdk-9.2: more stuff
-	more thoughts
-
-2003/03/13  Warly  <warly at mandrakesoft.com>
-
-	* install_gtk.pm: logo is the same for desktop and powerpack
-	installations.
-
-	* share/compssUsers.desktop: Make only one sectio. Include KDE/GNOME and
-	documentation into it.
-
-2003/03/12  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: updated
-
-2003/03/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/cy.po, share/po/et.po, share/po/he.po: updated Welsh, Estonian
-	and Hebrew files
-
-2003/03/12  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_any.pm: added log for kernel module packages found.
-
-	* network/modem.pm: fixed typo.
-	fix ltmodem package name with newer version.
-
-	* install_steps_interactive.pm: fix for newer kernel module package name.
-
-	* standalone/XFdrake: fix for newer commercial kernel module package name.
-
-	* install_steps.pm: fix for newer commercial package name (kernel module).
-	added minimal of what is selected log for pkg_install.
-
-	* detect_devices.pm: fix titi sucks.
-
-	* standalone.pm: fixed return value of check_kernel_module_packages and
-	examination of synthesis
-	file using current interface of urpm library.
-	fix small typo.
-
-2003/03/12  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: fix non-important (but still valid) part of #2488, a.k.a
-	package tree not expanding visually when it should (needs the mouse
-	pointer over it to be updated visually)
-
-	* share/po/ja.po: fix for "Advanced" by utuhiro <utuhiro at
-	mx12.freecom.ne.jp>
-
-2003/03/12  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file
-
-	* share/po/nl.po: updated dutch file
-	updated pot file
-
-	* keyboard.pm: Tagged cyrillic keyboard as non-latin
-
-2003/03/12  Pixel  <pixel at mandrakesoft.com>
-
-	* standalone/diskdrake: set by default the fs type and mntpoint for
-	removables not present in fstab
-	(useful for harddrake)
-
-	* standalone/drakupdate_fstab: have fd0 & fd1 be recognised as known
-	entries, even if we don't probe them
-	(useful for harddrake)
-
-	* diskdrake/interactive.pm, install_interactive.pm: fix maximum loopback
-	size (bug #3188)
-
-2003/03/12  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* harddrake/data.pm: jackadit^h^h^h^h^ hpixel said: "we do not need
-	anymore --auto"
-	fix typo
-	handle multiple removable devices: their managment is different from
-	other hw
-	classes since we need to run a config tool per device and not one per hw
-	class
-
-	* standalone/harddrake2: fix first message display
-	better packed paned behavior in both embedded and standalone modes
-	handle multiple removable devices: their managment is different from
-	other hw
-	classes since we need to run a config tool per device and not one per hw
-	class
-
-	* drakxtools.spec: update requires
-	9.1-20mdk
-
-	* standalone/service_harddrake: let it look better
-	shut up perl_checker
-	handle multiple removable devices: their managment is different from
-	other hw
-	classes since we need to run a config tool per device and not one per hw
-	class
-
-	* docs/mdk-9.2: better embedded diskdrake hint
-
-	* diskdrake/hd_gtk.pm: 
-	  - let diskdrake fit when embedded in mcc
-	  - let action box be larger so that there's no horizontal scrollbar in
-	standalone mode
-
-	* share/po/wa.po: fix package build :-(
-
-	* standalone/drakedm: really sort
-	  - check if dm package is installed and install it if needed
-	  - use format instead of reverse() (not a big slow down but small
-	rivers make
-	big ones and it makes gc happier...)
-
-2003/03/11  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* lang.pm: thx perl checko
-	(pablo) change kde font scheme (crossing fingers)
-
-2003/03/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/nl.po, share/po/cs.po: updated Dutch and Czech files
-
-2003/03/11  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: typos fixed
-
-2003/03/11  David Baudens  <baudens at mandrakesoft.com>
-
-	* share/advertising/10-security.png, share/advertising/07-server.pl,
-	share/advertising/12-mdkexpert.png,
-	share/advertising/06-development.png,
-	share/advertising/06-development.pl, share/advertising/11-mnf.pl,
-	share/advertising/09-mdksecure.png, share/advertising/01-thanks.png,
-	share/advertising/07-server.png, share/advertising/02-community.png,
-	share/po/fr.po, share/advertising/list, share/advertising/11-mnf.png,
-	share/advertising/02-community.pl, share/advertising/03-software.pl,
-	share/advertising/05-desktop.pl, share/advertising/09-mdksecure.pl,
-	share/advertising/01-thanks.pl,
-	share/advertising/13-mdkexpert_corporate.pl,
-	share/advertising/12-mdkexpert.pl, share/advertising/03-software.png,
-	share/advertising/08-store.pl, share/advertising/04-configuration.png,
-	share/advertising/13-mdkexpert_corporate.png,
-	share/advertising/10-security.pl, share/advertising/05-desktop.png,
-	share/advertising/04-configuration.pl, share/advertising/08-store.png:
-	Update
-
-2003/03/11  Florin Grad  <florin at mandrakesoft.com>
-
-	* standalone/drakgw: really use the chosen net_connect interface
-
-2003/03/11  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* network/network.pm: changed netcnx type probe (so that if an ethernet
-	connection exists, it won't
-	cause netcnx type to be always lan).
-
-	* rescue/tree/etc/oem: modified language settings.
-
-	* network/adsl.pm: moved probing code outside adsl_ask_info.
-
-	* network/ethernet.pm: use $::prefix, waiting for 9.1 to be out before
-	cleaning network modules.
-
-	* standalone/drakconnect: added probing of adsl connection.
-
-2003/03/11  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_steps_gtk.pm: the shadow behind the new adverts looks ugly,
-	remove it
-	new advertisement will be with grey background
-
-	* share/po/fr.po: rephrase a bit MNF advert to make it fit
-	spelling
-
-	* share/advertising/07-server.pl, share/advertising/06-development.pl,
-	share/advertising/11-mnf.pl, share/advertising/02-community.pl,
-	share/advertising/03-software.pl, share/advertising/05-desktop.pl,
-	share/advertising/09-mdksecure.pl, share/advertising/01-thanks.pl,
-	share/advertising/12-mdkexpert.pl,
-	share/advertising/13-mdkexpert_corporate.pl,
-	share/advertising/08-store.pl, share/advertising/10-security.pl,
-	share/advertising/04-configuration.pl: fix pablo breaking translation of
-	advertisement :)
-
-	* lang.pm: thx perl checko
-	(pablo) change kde font scheme (crossing fingers)
-
-	* install_steps_interactive.pm: install additional locales package for
-	country according to the locale that will be really used, not according
-	to the default locale for a given country (fixing unecessary installing
-	of locales-de in case of a fr_CH install)
-
-2003/03/11  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/it.po, share/po/no.po: updated Italian and Norwegian files
-
-	* lang.pm: Changed Qt Chinese XIMStyle to 'Over The Spot' ('On The Spot'
-	crashes)
-	changed KDE default font names for CJK
-
-	* share/po/nl.po, share/po/cs.po: updated Dutch and Czech files
-
-	* share/po/da.po, share/po/vi.po: updated Danish and Vientamese files
-
-2003/03/11  Pixel  <pixel at mandrakesoft.com>
-
-	* Xconfig/main.pm: remove XFdrake icons (per dadou's request)
-
-	* any.pm, bootloader.pm, standalone/drakboot: fix lilo-menu not working
-	(bug #3048)
-
-2003/03/11  Stew Benedict  <sbenedict at mandrakesoft.com>
-
-	* standalone/drakbackup: More gtk2 fixes.
-
-2003/03/11  Till Kamppeter  <till at mandrakesoft.com>
-
-	* printer/printerdrake.pm: Added button to switch to japanese text file
-	printing.
-	Many bug fixes:
-	  - Wait messages bloxked the OK buttons of the dialogs telling how to
-	scan and how to read photo cards on HP�s MF devices.
-	  - Do not configure OpenOffice.org any more, only Star Office.
-	  OpenOffice.org is patched to have native CUPS support now.
-	  - If the Port for a BrowsePoll address is left blank, 631 is taken as
-	  default now.
-	  - Text for firmware upload for HP LaserJet 1000 now also available in
-	  the 'Learn how to use printer' dialog.
-	  - Updated check of model name for HP�s MF devices to newest models.
-
-	* printer/detect.pm: Made sure that all IP addresses of the local machine
-	are in 'Allow
-	From' lines in the /etc/cups/cupsd.conf, otherwise one can have
-	certain configurations with which one cannot access to the options of
-	the local printer(s).
-
-	* printer/main.pm: Made sure that all IP addresses of the local machine
-	are in 'Allow
-	From' lines in the /etc/cups/cupsd.conf, otherwise one can have
-	certain configurations with which one cannot access to the options of
-	the local printer(s).
-	Added button to switch to japanese text file printing.
-
-	* printer/office.pm: Many bug fixes:
-	  - Wait messages bloxked the OK buttons of the dialogs telling how to
-	scan and how to read photo cards on HP�s MF devices.
-	  - Do not configure OpenOffice.org any more, only Star Office.
-	  OpenOffice.org is patched to have native CUPS support now.
-	  - If the Port for a BrowsePoll address is left blank, 631 is taken as
-	  default now.
-	  - Text for firmware upload for HP LaserJet 1000 now also available in
-	  the 'Learn how to use printer' dialog.
-	  - Updated check of model name for HP�s MF devices to newest models.
-
-2003/03/11  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* drakxtools.spec: 9.1-19mdk final
-
-	* docs/mdk-9.2: update
-
-2003/03/11  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: add kdeartwork level 3 in KDE
-
-	* share/logo-mandrake.png: 9.1 logo
-
-2003/03/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/no.po: minor typo
-
-2003/03/10  Alice Lafox  <alice at lafox.com.ua>
-
-	* share/po/ru.po: some fixes
-	update
-
-2003/03/10  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* install_any.pm: use quoted url instead for install_urpmi.
-	fixed duplicate url entry for file and removable.
-	build a list file only if needed for install_urpmi.
-
-	* rescue/tree/etc/oem, rescue/tree/etc/oem-all: added missing right
-	parenthesis.
-	fix for strange parted behaviour.
-
-2003/03/10  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* install_steps.pm: fix original #2842 problem
-
-	* lang.pm (pablo) workaround console localization broken in RTL languages
-	fix original #2842 problem
-
-	* install_gtk.pm: meta class desktop also uses galaxy theme, not blue
-	theme
-
-2003/03/10  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/no.po: minor typo
-	updated Norwegian file
-	updated Welsh, Icelandic, Italian, Norwegian
-
-	* share/po/Makefile, share/po/it.po, share/po/is.po, share/po/cy.po:
-	updated Welsh, Icelandic, Italian, Norwegian
-
-	* keyboard.pm: Changed console Czech keyboard
-
-2003/03/10  Pixel  <pixel at mandrakesoft.com>
-
-	* install2.pm: fix getting brltty help and table (thanks to Hans Schou)
-
-2003/03/10  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/03/10  Thierry Vignaud  <tvignaud at mandrakesoft.com>
-
-	* standalone/draksec: 
-	  - clean wait messages creation
-	  - fix wait messages displaying (label was not displayed) in both
-	standalone and embedded modes
-
-	* drakxtools.spec: fix #1461
-	more logs
-	typo fix
-
-	* harddrake/TODO, docs/mdk-9.2: update
-
-	* services.pm: 
-	  - fix packing on standalone mode (no horizontal scrolling)
-	  - let show it all when embedded
-
-2003/03/10  Warly  <warly at mandrakesoft.com>
-
-	* share/rpmsrate: add kdeartwork-kde-classic not to have trouble in KDE
-	updates.
-	reduce gpm level from 4 to 2 in system
-
-	* share/compssUsers.desktop: Update for new standard pack
-
-2003/03/09  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: Typo fix
-
-2003/03/09  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* share/po/fr.po: latest missing stuff
-
-	* Xconfig/test.pm: fix background of X test during install
-
-2003/03/09  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	pot file
-
-	* standalone/drakTermServ: fixed text (missing '/')
-
-2003/03/09  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: make perl_checker a happy prog
-	no "Previous" button when choosing install or upgrade
-
-2003/03/08  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2003/03/07  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: mask encryption key (using stars)
-
-2003/03/07  Arkadiusz Lipiec  <alipiec at elka.pw.edu.pl>
-
-	* share/po/pl.po: One message
-	updated
-
-2003/03/07  Fabian Mandelbaum  <fabman at 2vias.com.ar>
-
-	* share/po/es.po: Updated Spanish translation
-
-2003/03/07  Frederic Lepied  <flepied at mandrakesoft.com>
-
-	* any.pm: launch startx.autologin instead of startx in autologin
-
-2003/03/07  Fran�ois Pons  <fpons at mandrakesoft.com>
-
-	* network/adsl.pm: dropped a line.
-	fix logical error (flepied).
-
-2003/03/07  Guillaume Cottenceau  <gc at mandrakesoft.com>
-
-	* ugtk2.pm: refine the already dirty code to workaround gtk bug leading to
-	bugzilla #1445 (clicking two times too fast still lead to same problem)
-	fix rpmdrake dumping core when multiple searchs in
-	"selected" and "upgradable" sorting modes (#2899)
-
-	* tools/cvslog2changelog.pl: add fabman
-	protect emails
-
-	* drakxtools.spec: fix rpmdrake dumping core when multiple searchs in
-	"selected" and "upgradable" sorting modes (#2899)
-
-2003/03/07  Pablo Saratxaga  <pablo at mandrakesoft.com>
-
-	* share/po/sk.po, share/po/pt_BR.po, share/po/th.po, share/po/et.po,
-	share/po/ja.po, share/po/ko.po, share/po/da.po, share/po/uz.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/sq.po,
-	share/po/it.po, share/po/es.po, share/po/lv.po, share/po/ru.po,
-	share/po/sl.po, share/po/tr.po, share/po/mt.po, share/po/uk.po,
-	share/po/lt.po, share/po/cy.po, share/po/tg.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/nl.po: iupdated Vietnamese,
-	Estonian and Dutch files;
-	fixed the translations of "default:LTR"
-	updated pot file
-
-	* share/po/gl.po, share/po/hr.po, share/po/be.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/he.po,
-	share/po/ca.po, share/po/ar.po, share/po/eu.po, share/po/hu.po,
-	share/po/id.po, share/po/br.po, share/po/no.po, share/po/ga.po,
-	share/po/sp.po, share/po/bs.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/fr.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po: updated
-	pot file
-
-	* share/advertising/06-development.pl, share/advertising/02-community.pl,
-	share/advertising/05-desktop.pl, share/advertising/01-thanks.pl,
-	share/advertising/08-store.pl, share/advertising/11-mnf.pl,
-	share/advertising/07-server.pl, share/advertising/10-security.pl,
-	share/advertising/03-software.pl, share/advertising/09-mdksecure.pl,
-	share/advertising/12-mdkexpert.pl,
-	share/advertising/13-mdkexpert_corporate.pl,
-	share/advertising/04-configuration.pl: Changed _() to N_()
-
-	* share/po/fi.po: updated Finnish file
-	updated pot file
-
-2003/03/07  Pixel  <pixel at mandrakesoft.com>
-
-	* install_steps_interactive.pm: mask encryption key (using stars)
-
-	* Makefile.config: don't install share/advertising/*.pl files in
-	Mandrake/mdkinst/usr/bin/perl-install/share, only in
-	Mandrake/share/advertising
-
-2003/03/06  David Baudens  <baudens@mandrakesoft.com>
-
-	* share/advertising/03-software.pl: Fix typo
-	Update
-	Sync names with text files
-
-	* share/advertising/07-server.pl, share/advertising/06-development.pl,
-	share/advertising/05-desktop.pl, share/advertising/08-store.pl,
-	share/advertising/11-mnf.pl,
-	share/advertising/13-mdkexpert_corporate.pl: Update
-	Sync names with text files
-
-	* share/advertising/07-desktop.png, share/advertising/14-mdkexpert.png,
-	share/advertising/14-mdkexpert.pl, share/advertising/17-mdkclub.pl,
-	share/advertising/13-mdkcampus.png, share/advertising/06-mcc.png,
-	share/advertising/11-mdkstore.pl, share/advertising/17-mdkclub.png,
-	share/advertising/11-mdkstore.png, share/advertising/12-mdkstore.png,
-	share/advertising/04-multimedia.png, share/advertising/10-mnf.png,
-	share/advertising/03-internet.pl, share/advertising/05-games.pl,
-	share/advertising/16-thanks.png, share/advertising/12-mdkstore.pl,
-	share/advertising/15-mdkexpert-corporate.png,
-	share/advertising/09-server.pl, share/advertising/05-games.png,
-	share/advertising/04-multimedia.pl, share/advertising/13-mdkcampus.pl,
-	share/advertising/03-internet.png, share/advertising/07-desktop.pl,
-	share/advertising/09-server.png, share/advertising/08-development.png,
-	share/advertising/10-mnf.pl,
-	share/advertising/15-mdkexpert-corporate.pl,
-	share/advertising/08-development.pl, share/advertising/06-mcc.pl: Remove
-	old files
-
-	* share/advertising/02-community.pl, share/advertising/01-thanks.pl,
-	share/advertising/list: Use texts from specifications
-
-	* share/advertising/10-security.png, share/advertising/07-server.png,
-	share/advertising/11-mnf.png, share/advertising/03-software.png,
-	share/advertising/10-security.pl, share/advertising/08-store.png,
-	share/advertising/12-mdkexpert.png,
-	share/advertising/06-development.png,
-	share/advertising/09-mdksecure.png, share/advertising/09-mdksecure.pl,
-	share/advertising/12-mdkexpert.pl,
-	share/advertising/04-configuration.png,
-	share/advertising/13-mdkexpert_corporate.png,
-	share/advertising/05-desktop.png, share/advertising/04-configuration.pl:
-	Sync names with text files
-
-2003/03/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* network/ethernet.pm: avoid virtual ethX to be reconfigured by
-	drakconnect
-	fixed ifconfig invocation and state analysis in install mode.
-
-	* drakxtools.spec: avoid virtual ethX to be reconfigured by drakconnect
-	NVIDIA drop.
-
-	* install_any.pm: dropped allowNVIDIA_rpms method.
-	added check_kernel_module_packages for checking prioprietary base kernel
-	package.
-
-	* install2.pm: added summaryAfter steps for summary.
-
-	* any.pm: make sure acpi is installed.
-
-	* standalone/XFdrake: moved prioprietary NVIDIA code support to generic
-	prioprietary support in standalone.pm.
-
-	* standalone.pm: fixed error message.
-	added check_kernel_module_packages with same behaviour expected as for
-	install_any module.
-
-	* install_steps.pm: dropped allowNVIDIA_rpms
-	fixed stupid again typo.
-	modified logic for summaryAfter.
-	fixed again the same typo.
-	fixed stupid typo.
-	summaryAfter created to install acpi and acpid if needed.
-
-	* install_steps_interactive.pm: dropped allowNVIDIA_rpms
-
-	* install_steps_gtk.pm: added desktop groups organization.
-
-	* network/modem.pm: added support for kernel base name of ltmodem.
-
-	* network/adsl.pm: fixed adsl login not probed in install mode.
-
-2003/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c: provide Host: in http requests so that install works
-	from sites with virtual hosting (#2561)
-
-	* share/po/es.po: this translation can't get much big or else it will
-	enlarge too
-	much diskdrake
-
-2003/03/06  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* lang.pm: Enabled Laotian (was missing a definition in %charsets),
-	Bengali (there starts to be gnome translations available),
-	and Kannada (there starts to be gnome translations available).
-	Code for Xhosa added (there is an official kde-i18n-xh package
-	available),
-	wating for lang-xh.png to enable it
-
-	* share/po/cs.po, share/po/vi.po, share/po/ta.po, share/po/fi.po,
-	share/po/ar.po: updated Czech, Arabic, Finnish, Tamil and Vietnamese
-	files
-
-2003/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: don't create xxx.conf for standard devfs compatibility names
-
-	* install_steps_interactive.pm: basic encrypt_key handling in upgrade
-	(don't mistype!)
-
-	* share/po/help-ru.pot: add it since drakx-chapter.xml is ok (dixit Alice
-	Lafox)
-
-	* share/po/help_xml2pm.pl: do not exclude "ru" drakx-help.xml anymore
-
-	* detect_devices.pm: merge cdroms__faking_ide_scsi() and
-	zips__faking_ide_scsi() in
-	cdroms_and_zips__faking_ide_scsi() to be able to have a good devfs
-	device name
-	this fixes *__faking_ide_scsi() not faking devfs_device causing bad
-	/etc/devfs/conf.d/dvd.conf for dvd burners
-
-	* install_any.pm: cleanup
-
-2003/03/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/draksec: perl_checker fix
-
-	* harddrake/data.pm: move usb webcams which have mod_quickcam as a driver
-	from unknown to
-	webcam clategory since they do not have any valid usb class
-
-	* standalone/service_harddrake: s/perl -w/use diagnostics/ so stat it get
-	removed from package at
-	build time
-
-	* drakxtools.spec: typo fix
-	9.1-17mdk
-	update
-	9.1-16mdk, first bit
-	more fixes
-
-	* harddrake/sound.pm: perl_checker fix
-	fix #1929
-	let fix #2244, #2245, #2730
-
-	* standalone/draksplash: do not crash on color selection
-	prevent one to pop up hundred of windows: make browse dialog be modal
-	  - fix #1766
-	  - do not crash when browsing
-
-	* services.pm: we do use $in !!!!
-
-	* docs/mdk-9.2: first bits of mdk9.2 specs (aka postponed bugs...) stuff
-
-	* scanner.pm: perl_checker fixes
-	do not detect some usb webcams as scanners ...
-
-	* harddrake/TODO: update
-
-	* standalone/draksound, install_steps_interactive.pm: let fix #2244,
-	#2245, #2730
-
-2003/03/06  Warly  <warly@mandrakesoft.com>
-
-	* network/network.pm: detect if the device is pcmcia when initializing the
-	ONBOOT parameter
-
-2003/03/06  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/po/fr.po: corrected remaining mise-�-jour
-
-2003/03/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: make sure acpi is installed.
-
-	* install_steps.pm: modified logic for summaryAfter.
-	fixed again the same typo.
-	fixed stupid typo.
-	summaryAfter created to install acpi and acpid if needed.
-	menu update method modified for upgrade.
-
-	* install2.pm: added summaryAfter steps for summary.
-
-2003/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/es.po: this translation can't get much big or else it will
-	enlarge too
-	much diskdrake
-
-2003/03/06  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* standalone/harddrake2: fixed XIM definitions for Chinese locales
-
-	* share/rpmsrate: removed non-ascii chars
-
-	* share/po/sv.po, share/po/sk.po: updated Slovak and Swedish files
-
-	* lang.pm: Enabled Laotian (was missing a definition in %charsets),
-	Bengali (there starts to be gnome translations available),
-	and Kannada (there starts to be gnome translations available).
-	Code for Xhosa added (there is an official kde-i18n-xh package
-	available),
-	wating for lang-xh.png to enable it
-	fixed XIM definitions for Chinese locales
-
-2003/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: don't create xxx.conf for standard devfs compatibility names
-
-	* detect_devices.pm: merge cdroms__faking_ide_scsi() and
-	zips__faking_ide_scsi() in
-	cdroms_and_zips__faking_ide_scsi() to be able to have a good devfs
-	device name
-	this fixes *__faking_ide_scsi() not faking devfs_device causing bad
-	/etc/devfs/conf.d/dvd.conf for dvd burners
-
-	* share/po/help_xml2pm.pl: do not exclude "ru" drakx-help.xml anymore
-
-	* interactive/gtk.pm: "ensure buttons are visible when the widgets above
-	are too big" only at install
-
-2003/03/06  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/03/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk2.pm: fix #2672
-
-	* Makefile: move ugtk2 back in drakxtools on gc idea
-
-	* standalone/logdrake: 
-	  - display "wait while searching" message also when embedded: we do not
-	want it only when embedded for explanations
-	  - flush this wait dialog draw queue on each update so that it get
-	  displayed when embedded
-
-	* harddrake/data.pm: move usb webcams which have mod_quickcam as a driver
-	from unknown to
-	webcam clategory since they do not have any valid usb class
-
-	* scanner.pm: do not detect some usb webcams as scanners ...
-
-	* standalone/drakedm: log system config changes
-
-	* drakxtools.spec: more fixes
-	more logdrake fixes
-	move ugtk2 back in drakxtools on gc idea
-	more fixes
-	more fixes
-	9.1-15mdk
-
-	* lang.pm: 
-	  - cornish is a p-celtic language (aka a britonnic one), not a gaelic
-	one
-	  - homogeinize q-celtic languages (aka gaelic ones)
-
-	* standalone/draksec: let i fit in 800x600
-
-2003/03/05  Arkadiusz Lipiec  <alipiec@elka.pw.edu.pl>
-
-	* share/po/pl.po: two entries remained
-
-2003/03/05  fabman
-
-	* share/po/es.po: updated Spanish translation
-
-2003/03/05  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* network/isdn.pm: read right config according to isdn-light or isdn4linux
-
-	* network/adsl.pm: read login name from net_cnx_up in pptp mode.
-
-	* network/ethernet.pm: fix to avoid creating an ifcfg-1 config file.
-
-	* network/tools.pm: if the user don't want to start the internet
-	connection, continue without
-	error message.
-
-	* network/netconnect.pm: use driver instead of descrition to validate an
-	isdn autodetection
-
-2003/03/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* drakxtools.spec: add changelog for drakconnect modification.
-
-	* standalone/drakconnect: fixed wizard modification not taken into account
-	when using drakconf.
-
-2003/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix one translation
-
-	* any.pm, drakxtools.spec, standalone/localedrake: fix behaviour when only
-	one lang is available (clicking
-	on "cancel" on the country selection didn't cancel it)
-
-2003/03/05  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ro.po, share/po/vi.po, share/po/ar.po: updated Arabic, Romanian
-	and Vietnamese files
-
-	* share/po/tg.po, share/po/th.po, share/po/is.po, share/po/sl.po,
-	share/po/az.po, share/po/be.po, share/po/uk.po, share/po/lt.po,
-	share/po/eo.po, share/po/hu.po: updated Hungarian file
-
-	* share/po/fr.po, share/po/it.po, share/po/es.po, share/po/de.po: merged
-	with help strings from manuals
-
-	* share/po/uz.po: updated Uzbek file
-
-	* share/po/no.po: updated Norwegian file
-
-2003/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/various.pm (choose_xdm): allow to switch back from level 5 to
-	level 3
-
-	* network/network.pm, network/isdn.pm: this is perl, not python ;p
-
-	* install_steps.pm: modifying keyboard in summary must modify XF86Config
-
-	* interactive/gtk.pm: ensure buttons are visible when the widgets above
-	are too big
-
-2003/03/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* mouse.pm, standalone/harddrake2, common.pm, harddrake/data.pm: prevent
-	warning when using diagnostics pragma (easier debugging)
-
-	* standalone/drakedm: handle low case config variables despite they should
-	have been upcase
-	(fix side effects of stupid rh code that manage $prefdm)
-
-	* detect_devices.pm: 
-	  - (getTVcards, isTVcard) : consolidate tv detection code
-	  - no need to keep capture buffer (not a big slow down but small rivers
-	make big ones...)
-	normalize
-	prevent warning when using diagnostics pragma (easier debugging)
-
-	* standalone/logdrake: restore old search behavior like we did before
-	gtk+-2 port:
-	  - empty log buffer on search startup
-	  - freeze buffer while searching
-	  - do not realize ourselves the window, it's done by next statement
-	  - set initial text to '' so that editable property is disabled once
-	  the textview is realized
-	no need to explicitely disable editable property, this is already
-	handled by ugtk2::gtktext_insert() called from ugtk2::gtktext_append()
-
-	* standalone/drakxtv, install_steps_interactive.pm: 
-	  - (getTVcards, isTVcard) : consolidate tv detection code
-	  - no need to keep capture buffer (not a big slow down but small rivers
-	make big ones...)
-
-	* drakxtools.spec: more to come
-
-	* share/po/fr.po: update french translation
-
-	* share/po/br.po: minor update
-
-2003/03/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* network/isdn.pm: corrected isdn-light choice
-
-	* network/modem.pm: install kdenetwork-kppp if kdebase is already
-	installed
-
-	* network/network.pm: allow to set hostname in DHCP mode
-	install tmdns only when bind isn't installed
-
-2003/03/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/drakconnect: clean interface flags when dhcp mode is used.
-
-	* network/ethernet.pm: avoid being pertubed by created virtual interface
-	(no inet addre nor
-	physicall card behing)
-
-2003/03/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: add florin alafox alus
-
-	* lang.pm: set better default XIMInputStyle value for CJK, thx to Narfi
-	Stefansson <narfi at cs.wisc.edu> for the idea
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: don't forget to
-	probe USB for info and error messages as well
-
-2003/03/04  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-	updated pot files
-
-	* share/po/ar.po: corrected encoding problems
-	updated pot files
-
-	* share/po/sk.po, share/po/ru.po, share/po/pt_BR.po, share/po/sl.po,
-	share/po/no.po, share/po/ja.po, share/po/tr.po, share/po/mt.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/lt.po, share/po/sp.po,
-	share/po/tg.po, share/po/uz.po, share/po/ro.po, share/po/wa.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/sq.po, share/po/nl.po, share/po/lv.po: updated
-	pot file
-
-	* share/po/th.po: corrected encoding problems
-	updated pot file
-
-	* share/po/et.po: updated Estonian file
-	updated pot files
-
-	* share/po/id.po, share/po/gl.po, share/po/br.po, share/po/hr.po,
-	share/po/ga.po, share/po/be.po, share/po/fi.po, share/po/he.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/bs.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/fr.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/hu.po: updated
-	pot files
-
-2003/03/04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add "acpi" and "acpid" to INSTALL
-	move imap to NETWORKING_MAIL_SERVER (bug #2622)
-
-2003/03/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakperm: 
-	  - untabify
-	  - fix small memory leak (tree iterators)
-	  - restore edit dialog on doble click and
-	  - restore informations retrieving for edit dialog on doble click and
-	get rid of %CURENT
-
-	* standalone/logdrake: scroll back when logging
-
-2003/03/04  florin
-
-	* standalone/drakgw: simplified form (pixel)
-
-2003/03/04  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2003/03/04  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/hd_gtk.pm: 
-	  - in focus_in_event for partition buttons, grab_focus is needed
-	because gtk2 is buggy. Forcing an expose event would be enough
-	  - in button_press_event for partition buttons, grab_focus is needed
-	because gtk2 is buggy. The creation of widgets causes the lost of the
-	focus
-	(fixes part of #2621)
-
-	* share/rpmsrate: move imap to NETWORKING_MAIL_SERVER (bug #2622)
-
-	* rescue/tree/etc/profile: 
-	  - unsetting LD_LIBRARY_PATH: setting LD_LIBRARY_PATH to libraries in
-	/mnt is
-	wrong since the ld loader used (/lib/ld-linux.so.2) won't use the one in
-	/mnt,
-	causing dependency problems.
-	  - removing /mnt dirs from PATH (which are not useful anymore since the
-	corresponding libraries won't be found)
-	(fixes bug #2554)
-
-	* install_steps_interactive.pm: fix typo
-
-	* network/nfs.pm (check): fix return value (bug introduced with checking
-	portmap is running)
-
-	* lang.pm: make perl_checker happy
-
-	* services.pm: in drakxservices, don't stop services if one is using the
-	gtk frontend (since it allows one to start/stop services)
-	this allows to skip stopping service "dm" (bug #2664)
-
-2003/03/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakboot: remove debuging assertions (as spoted by gc)
-
-	* standalone/drakperm: 
-	  - remove last warning
-	  - remove unused variables
-	  - fix #1776 (part one): make up and down button be usefull instead of
-	nop (this need an updated perl-GTK2 though)
-	  - let up, down, delete and edit buttons be insensitive when selection
-	  is destroyed or when there's no selection
-	  - fix #1776 part two (do not insert dummy lines)
-	  - restore special lines with current keyword
-	  - reuse already defined path
-
-2003/03/03  alafox
-
-	* share/po/ru.po: updated and partially proofread. need more lproof
-
-2003/03/03  alus
-
-	* share/po/pl.po: updated
-
-2003/03/03  florin
-
-	* standalone/drakgw: add an extra first choose the net device step
-
-2003/03/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* network/tools.pm: simplified unquotify.
-
-	* network/adsl.pm: simplified code of adsl_ask_info, password can be
-	retrieved using
-	passwd_by_login which was not used with computed login from
-	/etc/ppp/peers/adsl
-	or /etc/ppp/options or /etc/ppp/options.adsl.
-
-2003/03/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: thx po validato
-
-	* any.pm, drakxtools.spec: any::selectLanguage: in standalone, don't
-	categorize langs, for
-	better looking (since most people will have very few of them)
-
-	* share/po/validate.pl: make it useful
-	  - print problems with GREP_COLOR
-	  - have enough exceptions to get usable errors
-
-	* interactive/gtk.pm: a few treeview/list fixes:
-	  - when selecting a value, scroll it like in treeview/tree
-	  - use saved_default_val dirty hackery to really honour default value
-	  - fix not calling $select again when trying to select an already
-	selected value (happens when clicking or keyboard-selecting;
-	  broken, it ended up in always scrolling the selected value to
-	  the center)
-
-2003/03/03  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/lt.po, share/po/he.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/sq.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file
-
-	* share/po/it.po: updated Italian file
-	updated pot file
-
-	* share/po/et.po, share/po/fi.po, share/po/nl.po: updated Estonian,
-	Finnish and Dutch files
-	updated pot file
-
-2003/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk2.pm (n_line_size): spacing for default font using XFT is 3
-
-	* install_steps_interactive.pm: add some explaination for translators
-	translate _bootloader_ on _device_
-	translate mouse names
-
-	* install_interactive.pm: use formatAlaTeX() for the warning "DrakX will
-	now resize your Windows partition..."
-
-	* share/po/help-fr.pot, share/po/help-de.pot, help.pm,
-	share/po/help-es.pot: update from xml
-
-	* share/rpmsrate: add ncurses-devel in DEVELOPMENT
-
-	* Xconfig/various.pm (runlevel): fix typo
-
-2003/03/03  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/detect.pm: Fixed bug of USB printers which do not report back an
-	IEEE-1284 ID string after
-	three attempts being invisible instead of being listed as an "Unknown
-	device".
-
-	* printer/data.pm, printer/printerdrake.pm: Fixed bug of wrong function
-	call to display the spooler name (Titi's untested changes).
-
-2003/03/03  tpittich
-
-	* share/po/sk.po: updated slovak translation
-	updated slovak translation
-	change code page to utf-8
-
-2003/03/03  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: 9.1-13mdk
-	9.1-12mdk
-
-	* share/po/fr.po: unfuzzy()
-	fix translation
-
-	* standalone/harddrake2: 
-	  - remove a warning
-	  - better scsi bus location
-	reap zombie children (aka fix mem leak :-( )
-
-	* standalone/drakboot: 
-	  - fix #2091 and #2480 (settings restoration
-	  - make dialogs be modal
-
-	* standalone/drakperm: remove unused $rows_cnt
-	smoother gui: let main windows be unreachable until modal dialog is
-	closed
-	fix bug reported by C�dric Th�venet (impossible to save newly edited
-	rules)
-
-	* share/po/help-fr.pot, share/po/help-de.pot, share/po/help-es.pot,
-	share/po/help-it.pot: revert to non broken version
-
-2003/03/02  alafox
-
-	* share/po/ru.po: updated
-
-2003/03/02  alus
-
-	* share/po/pl.po: Hard spell checking
-
-2003/03/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/translation_size.pl: add
-
-2003/03/02  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po, share/po/es.po, share/po/ro.po, share/po/hu.po,
-	share/po/fi.po, share/po/ar.po: updated Arabic, Estonian, Finnish,
-	Hungarian and Romanian files
-
-2003/03/02  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Avoid two overlayed wait messages when installing packages
-	  - Let applications (OpenOffice.org/GIMP) being once on startup of
-	Printerdrake
-	Call function for configuring applications only if really needed.
-	Shortened the texts in some list dialogs to get a better layout.
-	  - When non-interactively creating print queues ask the user for the
-	model
-	  name if the model is not in the database, don't do wild guesses then.
-
-	* printer/data.pm: Make file checks for CUPS package installation
-	independent of whether "curl"
-	or "wget" is installed to fulfill the "webfetch" requirement.
-
-	* printer/detect.pm: Read device ID string for a USB printer up to three
-	times when it does not contain information.
-
-	* printer/gimp.pm: Fixed auto-configuration for printers in the GIMP to
-	work with Foomatic 3.0.
-
-	* printer/main.pm: Correction on reading the Foomatic overview.
-	Fixes on reading of Foomatic data overview ("foomatic-configure -O"):
-	  - Removed usage of on-disk cache
-	  - Made new "<general>" and "<ieee1284>" tags for auto-detection info
-	being recognized.
-
-2003/03/01  fabman
-
-	* share/po/es.po: updated Spanish translation
-	updated Spanish translation
-
-2003/03/01  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/sv.po, share/po/sr.po,
-	share/po/hu.po: updated Chinese, Swedish, Hungarian and Serbian files
-
-2003/03/01  Till Kamppeter  <till@mandrakesoft.com>
-
-	* install_steps_interactive.pm: The generation of the "Summary" button for
-	printer configuration created a blank entry in the
-	$o->{printer}{configures} hash which lead to a blank menu entry in the
-	main menu of printerdrake. This is fixed now.
-
-2003/02/28  alus
-
-	* share/po/pl.po: updated
-
-2003/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/ja.po: reduce a translation size so that groups choice still
-	has the "ok" button shown
-
-	* detect_devices.pm: let hasSMP don't exit DrakX in testing mode because
-	/dev/mem is not accessible
-
-2003/02/28  alus
-
-	* share/po/pl.po: updated
-
-2003/02/28  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakhelp: 
-	  - fix the check of mandrake_doc installed package (gc)
-
-2003/02/28  fabman
-
-	* share/po/es.po: updated Spanish translations. Some fuzzy left
-
-2003/02/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* network/modem.pm: add LT WinModem support by searching ltmodem package.
-
-	* drakxtools.spec: ltmodem support reminder.
-	fixes for drakconnect.
-
-	* any.pm: install acpi and acpid if "Enable ACPI" is ok.
-
-	* standalone/drakconnect: removed profile management entry point.
-
-2003/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_gtk.pm: fix theming in --doc mode
-
-	* mdk-stage1/init.c: moltes powered (for deush)
-
-	* lang.pm: remove temporiraly lo because utf_lo is not in the charsets
-	hash
-	put new pablo's images (less large, add missing ones)
-	sort langs in lang.pm
-
-	* mdk-stage1/modules.c, mdk-stage1/.cvsignore: hd_usb.img ->
-	hdcdrom_usb.img
-
-	* standalone/draksplash, standalone/drakfirewall, standalone/logdrake,
-	standalone/drakpxe, standalone/keyboarddrake, standalone/drakboot,
-	standalone/mousedrake, standalone/drakbackup, standalone/drakconnect,
-	standalone/drakxtv, standalone/adduserdrake, standalone/drakxservices,
-	standalone/drakproxy, standalone/livedrake, standalone/harddrake2,
-	standalone/drakfont, standalone/drakgw, standalone/drakperm,
-	standalone/scannerdrake: reflect in standalone drakxtools the removal of
-	DrakX icons
-
-	* pixmaps/langs/lang-zh_CN.png, pixmaps/langs/lang-sl.png,
-	pixmaps/langs/lang-hy.png, pixmaps/langs/lang-de.png,
-	pixmaps/langs/lang-cy.png, pixmaps/langs/lang-it.png,
-	pixmaps/langs/lang-eu.png, pixmaps/langs/lang-ca.png,
-	pixmaps/langs/lang-sp.png, pixmaps/langs/lang-mr.png,
-	pixmaps/langs/lang-am.png, pixmaps/langs/lang-nb.png,
-	pixmaps/langs/lang-kn.png, pixmaps/langs/lang-gd.png,
-	pixmaps/langs/lang-bn.png, pixmaps/langs/lang-lo.png,
-	pixmaps/langs/lang-el.png, pixmaps/langs/lang-ia.png,
-	pixmaps/langs/lang-pt_BR.png, pixmaps/langs/lang-sv.png,
-	pixmaps/langs/lang-mi.png, pixmaps/langs/lang-bg.png,
-	pixmaps/langs/lang-fo.png, pixmaps/langs/lang-kw.png,
-	pixmaps/langs/lang-hu.png, pixmaps/langs/lang-ur.png,
-	pixmaps/langs/lang-iu.png, pixmaps/langs/lang-az.png,
-	pixmaps/langs/lang-mt.png, pixmaps/langs/lang-et.png,
-	pixmaps/langs/lang-wa.png, pixmaps/langs/lang-sq.png,
-	pixmaps/langs/lang-he.png, pixmaps/langs/lang-eo.png,
-	pixmaps/langs/lang-ta.png, pixmaps/langs/lang-ga.png,
-	pixmaps/langs/lang-sr.png, pixmaps/langs/lang-lt.png,
-	pixmaps/langs/lang-oc.png, pixmaps/langs/lang-ms.png,
-	pixmaps/langs/lang-mk.png, pixmaps/langs/lang-lv.png,
-	pixmaps/langs/lang-zh_TW.png, pixmaps/langs/lang-is.png,
-	pixmaps/langs/lang-ro.png, pixmaps/langs/lang-be.png,
-	pixmaps/langs/lang-fr.png, pixmaps/langs/lang-te.png,
-	pixmaps/langs/lang-hr.png, pixmaps/langs/lang-no.png,
-	pixmaps/langs/lang-en_GB.png, pixmaps/langs/lang-sk.png,
-	pixmaps/langs/lang-uk.png, pixmaps/langs/lang-br.png,
-	pixmaps/langs/lang-en_US.png, pixmaps/langs/lang-bs.png,
-	pixmaps/langs/lang-nl.png, pixmaps/langs/lang-af.png,
-	pixmaps/langs/lang-tr.png, pixmaps/langs/lang-pt.png,
-	pixmaps/langs/lang-gl.png, pixmaps/langs/lang-uz.png,
-	pixmaps/langs/lang-pl.png, pixmaps/langs/lang-hi.png,
-	pixmaps/langs/lang-id.png, pixmaps/langs/lang-mn.png,
-	pixmaps/langs/lang-yi.png, pixmaps/langs/lang-fi.png,
-	pixmaps/langs/lang-ka.png, pixmaps/langs/lang-ru.png,
-	pixmaps/langs/lang-nn.png, pixmaps/langs/lang-gv.png,
-	pixmaps/langs/lang-th.png, pixmaps/langs/lang-cs.png,
-	pixmaps/langs/lang-ko.png, pixmaps/langs/lang-tg.png,
-	pixmaps/langs/lang-tt.png, pixmaps/langs/lang-da.png,
-	pixmaps/langs/lang-ja.png, pixmaps/langs/lang-vi.png,
-	pixmaps/langs/lang-es.png: put new pablo's images (less large, add
-	missing ones)
-	sort langs in lang.pm
-
-	* detect_devices.pm: let hasSMP don't exit DrakX in testing mode because
-	/dev/mem is not accessible
-
-	* mdk-stage1/Makefile: fix deps problem when re-running make
-	hd_usb.img -> hdcdrom_usb.img
-
-	* share/po/ja.po: reduce a translation size so that groups choice still
-	has the "ok" button shown
-	reduce some translations sizes to make diskdrake at least usable ("ok"
-	button was hidden!)
-
-	* share/po/fr.po: update
-
-	* ugtk2.pm: perl checko says we need to use parentheses with ref
-	hugly hack because GtkLabel doesn't wrap when using languages that don't
-	contain spaces
-
-	* drakxtools.spec: c�ws g� m��h
-
-2003/02/28  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/help-de.pot, share/po/help-it.pot, share/po/help-fr.pot,
-	share/po/help-es.pot: updated pot file
-
-	* standalone/harddrake2: i18n fixes
-
-	* standalone/drakpxe: fixed bad English string
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, share/po/sq.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/lv.po, share/po/hu.po: updated pot file
-	updated pot file
-
-	* share/po/et.po, share/po/ja.po: updated pot file
-	Updated Estonian file
-	updated pot file
-
-2003/02/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: ensure the $::expert flag in netconnect
-	doesn't propagate to the rest of the
-	install
-
-2003/02/28  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* network/netconnect.pm: allow to switch in expert mode during install.
-
-	* network/ethernet.pm: Configure hostname only in expert mode.
-
-	* network/network.pm: corrected HOSTNAME/DHCP_HOSTNAME management.
-
-2003/02/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: ensure the $::expert flag in netconnect
-	doesn't propagate to the rest of the
-	install
-
-2003/02/28  Till Kamppeter  <till@mandrakesoft.com>
-
-	* scanner.pm, share/rpmsrate: 
-	  - Fixed confScanner() deleting the config file in some cases.
-	  - Removed PDQ from share/rpmsrate
-
-2003/02/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* lang.pm, Makefile: error out when a listed lang doesn't have a png lang
-	file
-	when doing the check of lang.pm, first show the warnings,
-	then the errors
-	at make-install time, remove pang lang files corresponding
-	to disabled langs
-
-2003/02/27  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: 9.1-10mdk
-
-2003/02/27  alafox
-
-	* share/po/ru.po: spellchecked and updated some translations
-
-2003/02/27  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* network/network.pm: corrected HOSTNAME management
-
-2003/02/27  florin
-
-	* standalone/drakgw: read more carefully the existing network
-	configuration
-
-2003/02/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: added mirror url not given.
-	fixed small typo.
-	added cancel button.
-	fixed message displayed.
-	added dialog more precisely.
-	added message box in case of error.
-
-	* share/rpmsrate: moved galaxy-gnome to X from GNOME (lmontel and dadou
-	request)
-
-	* network/adsl.pm: add sagem connection and disconnection script using
-	/etc/ppp/peers/adsl file.
-	probe user and password in /etc/ppp/options.adsl too (as produced by
-	original eagle installation),
-	sagem adsl type connection does not need to configure an ethernet
-	connection.
-
-2003/02/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: don't forget gigabit network
-	adapters
-
-2003/02/27  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	pot file
-
-2003/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: /root on a separate partition gives a warning, not an error
-
-	* network/nfs.pm (check): start portmap if needed
-
-	* install_any.pm: 
-	  - add get_info_from_fstab()
-	  - use it when reading existing fstab (to get for example devfs mount)
-	have locales-xx first in default_packages so that default choosing based
-	on
-	locales works for packages in default_packages
-
-	* pkgs.pm: perl_checker fix
-	enhance packageCallbackChoices and %preferred
-	(uses new URPM::Resolve feature allowing multiple choices)
-
-	* fs.pm, standalone/diskdrake: 
-	  - add get_info_from_fstab()
-	  - use it when reading existing fstab (to get for example devfs mount)
-
-	* interactive/gtk.pm: workaround gtk suckiness (set_text in a combo
-	generates two 'change' signals, one when removing the whole, one for
-	inserting the replacement..)
-
-	* install2.pm: no mouse probe when brltty
-
-	* standalone/drakupdate_fstab: allow removing device "non kudzu flagged"
-	(for harddrake)
-
-	* bootloader.pm: use lilo-like code for selecting mapdrive or not
-	(it was buggy, always generating "map (0x81) (0x80)", even for hd2)
-
-	* share/rpmsrate: 
-	  - don't need to list packages providing a required virtual language
-	(eg: aspell-dictionnary)
-	  - replace ispell with aspell (otherwise people using evolution get
-	both aspell and ispell)
-
-2003/02/27  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/data.pm, printer/office.pm: Make OpenOffice.org opening a GUI
-	printing tool when printing with the "Generic Printer".
-
-	* standalone/scannerdrake: Do not ask for the port when the user has
-	chosen an HP MF device as scanner model.
-
-2003/02/27  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: translate missing translations
-	fix sorting in keybordrake that was broken by bad translator
-
-	* standalone/drakconnect: fix too big internet configuration window
-
-	* standalone/service_harddrake: add ieee1394-controller alias and load
-	ohci1394 when a firewire controller appeared
-	handle configurators with options (eg: "diskdrake --removable=scd0")
-
-	* drakxtools.spec: 9.1-10mdk
-	9.1-10mdk
-	9.1-9mdk
-
-	* standalone/drakperm: make it fit in embedded mode, large enough else
-
-	* harddrake/data.pm: add ieee1394-controller alias and load ohci1394 when
-	a firewire controller appeared
-
-	* standalone/drakgw: fix embedding
-
-2003/02/27  florin
-
-	* standalone/drakgw: read more carefully the existing network
-	configuration
-	the function is called read_dhcpd_conf not read_dhcpd_conf_raw
-	read the dhcpd conf file before hand
-
-	* network/network.pm: add the read_dhcpd_conf function for drakgw
-
-2003/02/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: change default version to 9.1
-
-	* standalone/drakconnect: fixed cancel on configure_net, fixed bad fields
-	setted up in configure_lan,
-	fixed Data::Dumper->Dump on stdout on startup.
-
-2003/02/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/mousedrake: fix mousedrake in embedded mode
-
-2003/02/27  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/da.po, share/po/hu.po: updated Dutch, Hungarian
-	and Danish files
-
-2003/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive/newt.pm: perl_checker fix
-
-	* pkgs.pm: enhance packageCallbackChoices and %preferred
-	(uses new URPM::Resolve feature allowing multiple choices)
-
-	* install_any.pm: have locales-xx first in default_packages so that
-	default choosing based on
-	locales works for packages in default_packages
-
-	* share/rpmsrate: 
-	  - don't need to list packages providing a required virtual language
-	(eg: aspell-dictionnary)
-	  - replace ispell with aspell (otherwise people using evolution get
-	both aspell and ispell)
-
-2003/02/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: More gtk2 updates.  May have finally suppressed
-	the hanging.
-
-2003/02/27  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm: Fixed bug #2171.
-
-2003/02/27  tpittich
-
-	* share/po/sk.po: updated slovak translation
-
-2003/02/27  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/data.pm: detect firewire controllers
-
-	* services.pm: perl_checker fix
-
-	* standalone/logdrake: fix scrolling when embedded
-
-	* standalone/drakboot: 
-	  - disable autologin settings when autologin is disabled
-	  - make embedded app look better
-	  - add vertical separators
-
-	* drakxtools.spec: 9.1-8mdk
-
-	* standalone/harddrake2: remove debugging print
-	small perl_checker fix
-	  - consolidate menu titles translations
-	  - add two pull down menu that enable one to access options and help
-	when
-	embedded
-	  - (popup_menu) provide this callback for embedded pull down menus
-	  - cleanup various other embedding stuff
-	  - convert all object creations to gc blessed style
-
-	* standalone/drakfloppy: 
-	  - gtk+2 port
-	  - clean the code through ugtk2
-	  - too many fixes to count
-	  - clean, clean it, ... (thus shrinking the code by 20%)
-	  - ...
-
-	* standalone/drakconnect: 
-	  - better check /sbin/ifconfig is executable rather than simply exists
-	  - fix lan configuration window filling ...
-
-	* ugtk2.pm: 
-	  - (create_factory_popup_menu): introduce it for embedded harddrake2
-	  - embedding cleanups:
-	o give access to top-level gtk2::plug widget
-	  o reuse gtkshow
-
-	* standalone/drakperm: make it fit in embedded mode, large enough else
-
-2003/02/26  alus
-
-	* share/po/pl.po: uipdated
-	updated
-
-2003/02/26  erwan
-
-	* rescue/list.ia64: merg ia64
-
-	* share/list.ia64, bootloader.pm, install_any.pm, Makefile: merge ia64
-
-	* install_steps.pm: Merging ia64
-
-	* any.pm: Merging any.pm with ia64
-
-	* fs.pm: merging fs.pm with ia64
-
-	* fsedit.pm, steps.pm, partition_table.pm: merging ia64
-
-2003/02/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved type detection code to network.
-
-	* install2.pm: added corporate global flag.
-
-	* standalone/drakpxe: added code to handle more smootly if apache or
-	apache-mod_perl is installed, or
-	try using apache2.
-	switched to apache2 instead of apache (avoid problem with
-	apache-mod_perl).
-
-	* network/network.pm: small fixes.
-	added probe separately to handle drakconnect horror.
-	add probe of internet connection (this could avoid strange behaviour).
-	fixed back as titi sucks about message.
-	try to get back DOMAINNAME if needed.
-
-	* standalone/drakconnect: fixed unablities to launch Internet
-	configuration dialog.
-	add explicit probe for netcnx type.
-
-2003/02/26  nplanel
-
-	* c/smp-dmi.c, c/smp.c: Two smp detection for intel arch
-
-2003/02/26  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-	* share/gen_locales.sh: removed exception for Tamil
-
-	* share/po/pl.po: Fixed syntax error
-
-	* share/po/nl.po, share/po/fi.po: updated Finnish and Dutch files
-
-	* keyboard.pm: There is no arabic keyboard available for the console
-
-2003/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive/newt.pm: handle multi-line labels for Checkbox'es (eg:
-	Options in diskdrake)
-	handle the "Advanced" button in newt
-
-	* network/isdn.pm: replace the last @isdndata with @isdn::isdndata (beurk)
-
-2003/02/26  Till Kamppeter  <till@mandrakesoft.com>
-
-	* scanner.pm: Skip Alcatel Speed Touch ADSL Modem when it is detected by
-	"sane-find-scanner"
-
-2003/02/26  tpittich
-
-	* share/po/sk.po: updated slovak translation (this is my first cvs commit
-	;) ).
-
-2003/02/26  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* c/smp-dmi.c: fix planel sucks that broke the installation (hint look at
-	nm output
-	on old stuff.so ... )
-
-	* standalone/drakedm: untabify
-	on laurent request, strip the empty lines and add a end-of-line
-	character on
-	last line
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, harddrake/sound.pm, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: typo fix
-	(s/snd-slot/sound-slot/)
-
-	* bootlook.pm, standalone/drakboot: 
-	  - kill used once only bootlook module
-	  - inline oneliners use only once
-	  - kill unused variables
-	  - strict pragma fixes
-	  - ...
-
-	* harddrake/data.pm: detect usb adsl speed touch modem as modem and not as
-	unknown device
-	what's remain: why sane-find-scanner keep detect it a scanner ??
-
-	* standalone/harddrake2: 
-	  - remove unused variable (hey perl_checker, why didn't you see it ?)
-	  - (rename_field) better use the parameter we passed than relying on $_
-	be set to the right value in that context even if it was correct
-
-2003/02/26  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	Finnish, Hungarian and Slovak files
-
-2003/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm, install_interactive.pm: after ntfs resize,
-	warn user that on Windows next boot fsck will be done
-
-2003/02/26  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: Gtk2 port.  Bugzilla reports.  Some perl_checker
-	errors still, but cleaner.
-	(some are generated by calls from other modules used)
-
-2003/02/26  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* c/smp-dmi.c: fix planel sucks that broke the installation (hint look at
-	nm output
-	on old stuff.so ... )
-
-2003/02/25  fabman
-
-	* share/po/es.po: updated spanish translation
-
-2003/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* network/network.pm (read_resolv_conf_raw): fix "search ..." handling
-
-2003/02/25  fabman
-
-	* share/po/es.po: Updated Spanish translations (some left)
-
-2003/02/25  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: removed gnome-tiles
-
-	* share/po/fr.po: mise-�-jour => mise � jour
-
-2003/02/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added dmidecode in install.
-
-	* pkgs.pm: improved code for populating group with pixel.
-
-	* network/adsl.pm: cleaned a bit the code.
-	added login and passwd remember from /etc/ppp/peers/adsl
-	/etc/ppp/options
-	/etc/ppp/pap-secrets /etc/ppp/chap-secrets file
-	modified string as sagem driver now use pppoa
-
-	* any.pm: added dmidecode in bug report.
-
-	* tools/Makefile, Makefile: removed dmidecode.
-	added dmidecode
-
-	* tools/dmidecode/dmidecode.c, tools/dmidecode/Makefile: added dmidecode
-
-	* rescue/list: removed dmidecode.
-	added dmidecode for rescue (from lm_sensors)
-
-2003/02/25  gbeauchesne
-
-	* share/list.x86_64: More xf86 modules for x86-64
-
-2003/02/25  nplanel
-
-	* c/smp-dmi.c, c/smp.c, c/Makefile.PL: Add dmidetection for smp
-
-2003/02/25  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ga.po, share/po/uk.po, share/po/lt.po, share/po/af.po,
-	share/po/lv.po: Fixed the wrong Finish/Finnish of some translations
-	updated Finnish and French files
-
-	* share/po/et.po: updated Estonian file
-	updated Finnish and French files
-
-	* share/po/th.po: Fixed Thai button for "Finish" (it means "end" and not
-	"from Finland")
-	updated Finnish and French files
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/sl.po, share/po/no.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/be.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/he.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, share/po/sq.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/hu.po: updated Finnish and French files
-
-2003/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm, install_gtk.pm: cleanup handling of XF4 server
-	choice during install
-
-	* network/network.pm (read_resolv_conf_raw): fix "search ..." handling
-
-	* share/rpmsrate: s/apache/apache2/
-
-	* mdk-stage1/mount.c: handle device hdi, hdj... hdt creation
-
-	* modules/interactive.pm: join detect_devices::stringlist() to have it in
-	a text box (eurk!)
-	(for bug #1802), the result is quite ugly, but at least the full line
-	can be read
-
-	* any.pm (fileshare_config): create group "fileshare" in "Custom" mode
-
-2003/02/25  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: Prepared for LPRng and PDQ
-	goint to Contribs or leaving the distro, "Change
-	Printing System" button only appears if at least one of them is manually
-	installed.
-
-2003/02/25  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/data.pm: handle floppes, zip drives, dvd-rom, cdrom and
-	burners at startup time
-	  - factorize code into harddrake::data::set_removable_configurator()
-	  - really do not offer to configure module for removable devices
-	  - do not put zip drives in unknown devices class
-	  - reuse Yes|No translations in harddrake::ui
-
-	* standalone/drakfloppy: we already use diagnostics pragma, so -w will
-	just slow down normal execution
-	only list physically present floppies
-	reuse MDK::Common
-	  - fix stupid copy 'n past of copyright header
-	  - update copyright years
-	fix #???? : switch the "expert mode" toggle button label regarding the
-	current
-	mode (beginner or expert)
-
-	* bootlook.pm: 
-	  - remove deprecated, half-commented aurora related code
-	  - fix display of autologin radio buttons
-
-	* standalone/harddrake2: do not display alternatives oss/alsa drivers if
-	there's none
-	  - factorize code into harddrake::data::set_removable_configurator()
-	  - really do not offer to configure module for removable devices
-	  - do not put zip drives in unknown devices class
-	  - reuse Yes|No translations in harddrake::ui
-	  - don't offer to configure module for removable media
-	  - usb devices (such as zip): display vendor, description and a more
-	detailled media type
-	display media capacity too (DVD and/or burning ability)
-
-	* standalone/service_harddrake: handle floppes, zip drives, dvd-rom, cdrom
-	and burners at startup time
-	don't black out the screen if not needed
-
-	* drakxtools.spec: 9.1-7mdk
-
-	* share/po/fr.po: update french translation
-
-2003/02/25  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: readd harddrake in SYSTEM 5
-
-	* share/compssUsers: add ARCHIVING in OFFICE
-
-2003/02/24  alus
-
-	* share/po/pl.po: one entry
-
-2003/02/24  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po,
-	share/po/sv.po, share/po/sr.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sq.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated Welsh, Greek,
-	Swedish and Chinese files
-
-	* lang.pm: improved default fonts for KDE, completed the geographic
-	location
-	by continent for a few remaining country codes
-
-	* share/po/et.po: updated Estonian file
-	updated Welsh, Greek, Swedish and Chinese files
-
-	* share/po/pt_BR.po, share/po/DrakX.pot, share/po/pl.po, share/po/pt.po:
-	updated Portuguese file
-	updated Welsh, Greek, Swedish and Chinese files
-
-2003/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm: use Sans & Monospace for kde (as requested by lmontel)
-
-	* mdk-stage1/probing.c: replace checking hd[a-h] with hd[a-t] (cf bug
-	#1801)
-
-	* install_steps_interactive.pm: allow neuneus to quit install at license
-	step (esp. for Ann & Warly's father)
-
-2003/02/24  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm: dmasound_awacs -> dmasound_pmac
-
-2003/02/24  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk2.pm: final embedding cleanups
-	  - clean up embedding; since socket automatically emit plug-added gtk+
-	signal
-	when plug is realize, it's just cleaner to centralize/consolidate the
-	child
-	  embedding in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR2', $::CCPID;"
-	  - keyboarddrake, xfdrake, drakautoinst: goto cleaning btw
-	  - clean up embedding; since socket get automatically destroyed on
-	child exit
-	  and since they emit plug-removed at that moment, it's just cleaner to
-	  centralize/consolidate the child exit in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR1', $::CCPID;"
-	  - drakautoinst, drakxservices, keyboardrake: fix fscking embedding
-	managment
-
-	* standalone.pm: final embedding cleanups
-
-	* standalone/harddrake2: fix size when embedded
-	first attempt at making printerdrake to behave smoother when embedded in
-	the
-	mcc
-	  - untabify
-	  - hide devices which has no driver or whose driver is an url,
-	a graphic server and consolidate the test by the way
-	prefix devfs device name with "/dev/" too
-
-	* standalone/drakfloppy: 
-	  - fix packing (#1760)
-	  - --expert command line option switch to expert mode by default
-	  - only hide expert stuff if not in expert mode at startup
-
-	* standalone/logdrake: 
-	  - remove debug statements
-	  - print an error message if we die on something other than wizcancel
-	fix mail alert generation
-	  - do not crash without any message in strict mode (wizcancel die
-	miscatched)
-	  - make the generated script be 'use strict' and perl_checker compliant
-	simplify
-	  - clean up embedding; since socket automatically emit plug-added gtk+
-	signal
-	  when plug is realize, it's just cleaner to centralize/consolidate the
-	child
-	  embedding in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR2', $::CCPID;"
-	  - keyboarddrake, xfdrake, drakautoinst: goto cleaning btw
-
-	* standalone/printerdrake, standalone/drakconnect,
-	standalone/scannerdrake: 
-	  - clean up embedding; since socket automatically emit plug-added gtk+
-	signal
-	when plug is realize, it's just cleaner to centralize/consolidate the
-	child
-	  embedding in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR2', $::CCPID;"
-	  - keyboarddrake, xfdrake, drakautoinst: goto cleaning btw
-
-	* standalone/drakfont: looks better like this
-	  - clean up embedding; since socket get automatically destroyed on
-	child exit
-	and since they emit plug-removed at that moment, it's just cleaner to
-	  centralize/consolidate the child exit in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR1', $::CCPID;"
-	  - drakautoinst, drakxservices, keyboardrake: fix fscking embedding
-	managment
-
-	* interactive/gtk.pm, printer/printerdrake.pm: first attempt at making
-	printerdrake to behave smoother when embedded in the
-	mcc
-
-	* standalone/drakautoinst, my_gtk.pm, standalone/XFdrake,
-	standalone/keyboarddrake: 
-	  - clean up embedding; since socket automatically emit plug-added gtk+
-	signal
-	when plug is realize, it's just cleaner to centralize/consolidate the
-	child
-	  embedding in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR2', $::CCPID;"
-	  - keyboarddrake, xfdrake, drakautoinst: goto cleaning btw
-	  - clean up embedding; since socket get automatically destroyed on
-	child exit
-	  and since they emit plug-removed at that moment, it's just cleaner to
-	  centralize/consolidate the child exit in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR1', $::CCPID;"
-	  - drakautoinst, drakxservices, keyboardrake: fix fscking embedding
-	managment
-
-	* drakxtools.spec: 9.1-6mdk
-	more fixes
-	9.1-5mdk
-	  - clean up embedding; since socket get automatically destroyed on
-	child exit
-	and since they emit plug-removed at that moment, it's just cleaner to
-	  centralize/consolidate the child exit in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR1', $::CCPID;"
-	  - drakautoinst, drakxservices, keyboardrake: fix fscking embedding
-	managment
-
-	* standalone/net_monitor: fix embedding (even if we don't embbed it, it's
-	better)
-
-	* bootlook.pm: perl_checker fix
-	clean up:
-	  - no more directly handle embeddign
-	  - use ugtk2
-	  - clean up embedding; since socket automatically emit plug-added gtk+
-	signal
-	when plug is realize, it's just cleaner to centralize/consolidate the
-	child
-	  embedding in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR2', $::CCPID;"
-	  - keyboarddrake, xfdrake, drakautoinst: goto cleaning btw
-	  - clean up embedding; since socket get automatically destroyed on
-	child exit
-	  and since they emit plug-removed at that moment, it's just cleaner to
-	  centralize/consolidate the child exit in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR1', $::CCPID;"
-	  - drakautoinst, drakxservices, keyboardrake: fix fscking embedding
-	managment
-
-	* standalone/drakxservices, diskdrake/hd_gtk.pm, standalone/drakboot,
-	standalone/drakTermServ: 
-	  - clean up embedding; since socket get automatically destroyed on
-	child exit
-	and since they emit plug-removed at that moment, it's just cleaner to
-	  centralize/consolidate the child exit in mcc
-	  this of course, need a newer up-to-date mcc
-	  what's more, it allows to remove the somewhat mythical
-	  "$::isEmbedded and kill 'USR1', $::CCPID;"
-	  - drakautoinst, drakxservices, keyboardrake: fix fscking embedding
-	managment
-
-	* standalone/drakperm: fix #1771
-	level should not be editable
-
-	* services.pm: in standalone mode, only display a service as enabled at
-	boot time
-	only if it's really enabled in current runlevel.
-	what's more it's more coherent with other "only show current runlevel
-	status" tools like ntsysv.
-
-2003/02/24  Warly  <warly@mandrakesoft.com>
-
-	* share/compssUsers: "Mail/Groupware/News" is now just "Mail"
-
-2003/02/23  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/it.po: fixed several fuzzy lines
-
-2003/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm: use output_p() instead of output() for
-	/etc/ntp/step-tickers
-
-2003/02/23  Till Kamppeter  <till@mandrakesoft.com>
-
-	* standalone/scannerdrake: Fixed wait message not embedded in drakconf.
-
-	* printer/main.pm, printer/printerdrake.pm: Several bug fixes on
-	printerdrake
-	  - "BrowsePoll <IP>:<Port>" needs "Browsing On" in
-	/etc/cups/cupsd.conf.
-	  - If the same printer model is once on the parallel port and second on
-	USB,
-	there was a new USB queue created on every start of Printerdrake.
-	  - Now CUPS is restarted whenever a new USB print queue is set up so
-	that
-	  CUPS can provide the model-related USB URI.
-	  - Made sure that the default printer is defined and that it is an
-	existing
-	  queue so that during installation printerdrake does not show a line
-	only
-	  containing " (Default)" in the list of installed printers.
-	  - Cleaned up data structure after automatic queue generation.
-
-2003/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm (migrate_files): check return values (fixes bug
-	#2170)
-
-2003/02/23  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/printerdrake.pm, install_steps_interactive.pm: Fixed bug of
-	printerdrake loosing the printer queue info during the
-	preparation of the "Summary" window (only if there are local
-	printers). No the printer queue entries should not be empty when
-	clicking on "Configure" in the "Printer" part of the "Summary" window.
-
-2003/02/22  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po, share/po/wa.po: updated pot file
-	updated Estonian file
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, share/po/sq.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/lv.po, share/po/hu.po: updated pot file
-
-	* standalone/harddrake2: changed an English string
-
-2003/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive/gtk.pm: in $::expert, use a SpinButton instead of HScale for
-	type "range"
-	(useful in diskdrake to enter the partition size directly)
-
-	* share/rpmsrate: ensure galaxy-kde is installed together with kdebase
-
-	* partition_table/raw.pm (test_for_bad_drives): don't open in write mode
-	when testing
-
-2003/02/22  siegel
-
-	* share/po/de.po: updates
-
-2003/02/21  alus
-
-	* share/po/pl.po: updated
-
-2003/02/21  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: no need to use regexp
-
-	* drakxtools.spec: 4mdk
-
-	* network/isdn.pm: $isdn->{is_light} wasn't set while using autodetection,
-	rpm wasn't installed
-
-	* network/tools.pm: oups... hu... nothing
-
-	* network/netconnect.pm: oups... hu... nothing
-	get back password input for adsl
-
-2003/02/21  florin
-
-	* network/netconnect.pm: add isdn check in get_net_device
-
-2003/02/21  gbeauchesne
-
-	* mdk-stage1/dietlibc/libcruft/dnscruft2.c: Better fix for DNS resolver
-	bug
-
-2003/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk2.pm: embedded should segfault a bit less if I don't let the
-	embedded
-	window creation destroy the destroy handler
-	workaround what seems to be a gtk bug (#1445)
-	gtk seems to loop (and take 100% user cpu) when
-	I change the pixbuf of a gtkcellrendererpixbuf
-	in a treeview that is not currently displayed
-
-2003/02/21  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	Estonian and Dutch files
-	updated Danish file
-
-	* help.pm: fixed a typo
-
-2003/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk2.pm: when isEmbedded, use $::WizardTable to allow non pop_it when
-	not visible
-
-	* pixmaps/colors16.png: 
-	  - make it the same range as colors.png and colors8.png
-	  - it is a 64 colors image (note that colors8 is 16 colors)
-
-	* services.pm (ask_standalone_gtk): ensure popup is not destroyed more
-	than once
-
-	* fsedit.pm: use test_for_bad_drives even after install (esp. to detect
-	removed usb-storage
-	devices still visible in /proc/scsi/scsi)
-
-	* install_steps_interactive.pm: "Generate auto install floppy" and "Save
-	packages selection" are now available in advanced
-
-	* Xconfig/resolution_and_depth.pm: fix setting the image & colors in
-	resolution chooser
-
-2003/02/21  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/printerdrake.pm: 
-	  - Fixed text of "Refresh printer list" button when list is empty.
-	  - Let printerdrake clean up its datastructure after auto-installing
-	printers in the beginning of the "Summary" installation step.
-
-2003/02/20  florin
-
-	* network/shorewall.pm: update 2 rules for the pptp dsl internet
-	connection
-
-2003/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: added wait message when building groups.
-
-2003/02/20  gbeauchesne
-
-	* mdk-stage1/dns.c: Fix mygethostbyaddr(), struct in is not a NULL
-	terminated string.
-	i.e. len has to be either sizeof(in.s_addr) or INADDRSZ.
-
-	* mdk-stage1/dietlibc/libcruft/dnscruft2.c: Workaround DNS resolver bug on
-	64-bit platforms.
-
-	* mdk-stage1/dietlibc/syscalls.s/lstat64.S,
-	mdk-stage1/dietlibc/libregex/rx.c, mdk-stage1/dietlibc/include/string.h,
-	mdk-stage1/dietlibc/libugly/strftime.c,
-	mdk-stage1/dietlibc/i386/ldexp.S, mdk-stage1/dietlibc/i386/sin.S,
-	mdk-stage1/dietlibc/lib/strerror.c, mdk-stage1/dietlibc/dietstdio.h,
-	mdk-stage1/dietlibc/include/sys/vfs.h,
-	mdk-stage1/dietlibc/include/unistd.h, mdk-stage1/dietlibc/i386/mmap64.S,
-	mdk-stage1/dietlibc/i386/vfork.S,
-	mdk-stage1/dietlibc/libstdio/fdglue2.c,
-	mdk-stage1/dietlibc/alpha/errlist.S,
-	mdk-stage1/dietlibc/include/dirent.h, mdk-stage1/dietlibc/sparc/urem.S,
-	mdk-stage1/dietlibc/libcruft/scandir64.c,
-	mdk-stage1/dietlibc/include/assert.h, mdk-stage1/dietlibc/lib/__isnan.c,
-	mdk-stage1/dietlibc/sparc/umul.S,
-	mdk-stage1/dietlibc/i386/dyn_syscalls.S, mdk-stage1/dietlibc/CHANGES,
-	mdk-stage1/dietlibc/libstdio/fflush.c,
-	mdk-stage1/dietlibc/libcruft/sysconf.c,
-	mdk-stage1/dietlibc/syscalls.s/pause.S,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/syscalls.s/n_sigprocmask.S,
-	mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/FAQ,
-	mdk-stage1/dietlibc/syscalls.s/socketcall.S,
-	mdk-stage1/dietlibc/include/sys/poll.h,
-	mdk-stage1/dietlibc/sparc/Makefile.add,
-	mdk-stage1/dietlibc/syscalls.s/n_sigsuspend.S,
-	mdk-stage1/dietlibc/include/dlfcn.h,
-	mdk-stage1/dietlibc/syscalls.s/umount2.S,
-	mdk-stage1/dietlibc/include/sys/time.h,
-	mdk-stage1/dietlibc/include/signal.h,
-	mdk-stage1/dietlibc/libcruft/alphasort64.c,
-	mdk-stage1/dietlibc/libshell/glob.c,
-	mdk-stage1/dietlibc/syscalls.s/n_sigpending.S,
-	mdk-stage1/dietlibc/include/stdarg-cruft.h,
-	mdk-stage1/dietlibc/lib/signal.c, mdk-stage1/dietlibc/lib/__dtostr.c,
-	mdk-stage1/dietlibc/lib/__isinf.c, mdk-stage1/dietlibc/syscalls.s/ipc.S,
-	mdk-stage1/dietlibc/include/sys/types.h, mdk-stage1/dietlibc/Makefile,
-	mdk-stage1/dietlibc/libstdio/fread.c,
-	mdk-stage1/dietlibc/syscalls.s/n_sigaction.S,
-	mdk-stage1/dietlibc/syscalls.s/fstat64.S,
-	mdk-stage1/dietlibc/libugly/tzfile.c,
-	mdk-stage1/dietlibc/lib/__v_printf.c,
-	mdk-stage1/dietlibc/sparc/errlist.S, mdk-stage1/dietlibc/i386/memchr.S,
-	mdk-stage1/dietlibc/syscalls.s/msync.S,
-	mdk-stage1/dietlibc/i386/libm2.S, mdk-stage1/dietlibc/sparc/udiv.S,
-	mdk-stage1/dietlibc/i386/cos.S, mdk-stage1/dietlibc/include/sys/ioctl.h,
-	mdk-stage1/dietlibc/syscalls.s/errlist.S,
-	mdk-stage1/dietlibc/syscalls.s/stat64.S,
-	mdk-stage1/dietlibc/libugly/strndup.c: Merge with dietlibc 0.22-1mdk
-
-2003/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dns.c: fix potential segfault thx to gwenole
-
-	* install_steps_interactive.pm: oops i didn't understand the internals of
-	wait_message hence breaking it. hopes that will fix.
-	install the potentially needed locales country when user selected
-	another country
-	Gtk2::Label::set is deprecated
-
-	* install_steps_gtk.pm, services.pm: Gtk2::Label::set is deprecated
-
-	* share/logo-mandrake.png: update shadow
-	Gtk2::Label::set is deprecated
-
-	* interactive.pm: oops i didn't understand the internals of wait_message
-	hence breaking it. hopes that will fix.
-	Gtk2::Label::set is deprecated
-
-	* install_gtk.pm, ugtk2.pm: change a bit position of main window and steps
-	window
-	in steps window, have titles in grey
-
-	* fs.pm: thx rekcehc_lrep
-
-	* any.pm: cows go m��h
-
-2003/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* network/shorewall.pm: fix florin: replace $prefix with $::prefix
-
-	* help.pm: fix typos
-
-	* any.pm: allow Cancel in setupBootloader__entries
-	  - add "Force No APIC"
-	  - rename add_append() to set_append()
-	(since it can be used to remove a key)
-	  - add remove_append_simple()
-
-	* install_steps.pm, bootloader.pm: 
-	  - add "Force No APIC"
-	  - rename add_append() to set_append()
-	(since it can be used to remove a key)
-	  - add remove_append_simple()
-
-	* network/network.pm: use detect_devices::pcmcia_probe() instead of
-	detect_devices::probeall()
-	  - read_resolv_conf() reads DOMAINNAME & DOMAINNAME2
-	  - read_resolv_conf() reads /etc/resolv.conf by default
-	  - read_resolv_conf_raw() created
-
-	* install_steps_interactive.pm: help perl_checker find the N("...") the
-	#-PO corresponds to
-
-	* diskdrake/interactive.pm: have ask_okcancel instead of ask_warn on
-	cdie's
-	add catch_cdie's around fsedit::check_mntpoint and fsedit::add
-
-	* install2.pm: {brltty}{device} is optional, default is ttyS0 or ttyS1 (?)
-
-	* fsedit.pm: warn non-ascii chars in mount point (cf bug #1588)
-	use cdie instead of die for warnings
-
-	* Xconfig/card.pm: don't vivify @cards
-
-	* install_steps_gtk.pm: fix $check_complete use in gtk summary
-
-2003/02/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: perl_checker
-	Finish gtk2 port.
-
-2003/02/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakgw: don't use gtk+2 deprecated functions
-
-	* bootlook.pm: 
-	  - add --testing support
-	  - fix #1923 (aka reuse consolided code instead of using deprecated
-	code)
-	  - minor cleanup
-	  - skip comments while parsing /etc/lilo.conf
-	don't use gtk+2 deprecated functions
-
-	* drakxtools.spec: 9.1-3mdk
-
-	* standalone/harddrake2: perl_checker fix
-	  - prevent any l10n problem by having only one path string when both
-	creating the menu and acessing a menu widget (aka translate menu
-	  paths only once), which also nicely cut down the translators job.
-	  - decrease diagnostics pragma verbosity (aka remove big fat warning
-	  messages)
-
-	* share/po/fr.po: further updates
-	translate all countrie names
-	update french translation
-
-2003/02/20  alus
-
-	* share/po/pl.po: typo fix
-
-2003/02/20  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: dhcp fix
-
-2003/02/20  gbeauchesne
-
-	* mdk-stage1/dietlibc/dietfeatures.h: Disable back WANT_TZFILE_PARSER,
-	0.22 fixed strftime() problem
-
-	* share/rpmsrate: Better defaults for OOo
-
-	* mdk-stage1/dns.c: Fix mygethostbyaddr(), struct in is not a NULL
-	terminated string.
-	i.e. len has to be either sizeof(in.s_addr) or INADDRSZ.
-
-2003/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: install the potentially needed locales
-	country when user selected
-	another country
-	Gtk2::Label::set is deprecated
-	add a PO comment to try to keep buttons in the window..
-
-	* share/themes-galaxy.rc: logo is aso white on blue
-
-	* mdk-stage1/dns.c: fix potential segfault thx to gwenole
-
-	* share/po/fr.po: some misc fixes
-	translate iraq
-
-	* fs.pm: thx rekcehc_lrep
-
-	* install_steps_gtk.pm: Gtk2::Label::set is deprecated
-	fix bold diplay of texts in adverts
-
-	* share/logo-mandrake.png, services.pm, interactive.pm: Gtk2::Label::set
-	is deprecated
-
-	* ugtk2.pm: try to handle case with large fonts (CJK for example) ->
-	branch on TextView
-	when the box will be quite large
-
-2003/02/20  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: corrected Russian
-	translation
-
-	* share/po/eu.po: changed encoding
-	corrected Russian translation
-
-2003/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: don't let diskdrake detect ext3/reiserfs/jfs/xfs on a type
-	0x7 partition
-	  - simplify check_mntpoint
-	  - fix checking mount point in Mount_point()
-
-	* partition_table.pm: set {device_windobe} for 0x107 *and* 0x7 (since
-	0x107 is not set correctly at this stage)
-	(otherwise this causes mount points /mnt/win_ /mnt/win_1...)
-
-	* diskdrake/interactive.pm: 
-	  - simplify check_mntpoint
-	  - fix checking mount point in Mount_point()
-
-	* bootloader.pm: 
-	  - add "Force No APIC"
-	  - rename add_append() to set_append()
-	(since it can be used to remove a key)
-	  - add remove_append_simple()
-
-	* install_steps_interactive.pm: help perl_checker find the N("...") the
-	#-PO corresponds to
-
-	* any.pm: 
-	  - add "Force No APIC"
-	  - rename add_append() to set_append()
-	(since it can be used to remove a key)
-	  - add remove_append_simple()
-	add XF86Config and XF86Config-4 to report.bug
-	no autologin by default if more than one users
-
-	* Xconfig/card.pm: log manually chosen graphic card
-	log why auto X config failed (needVideoRam)
-
-	* ugtk2.pm: ensure {box_size} is set (to have less warnings)
-
-	* standalone/diskdrake, interactive.pm: have less warnings when debugging
-
-	* pkgs.pm: prefer myspell-en_US
-
-	* install_steps.pm: 
-	  - add "Force No APIC"
-	  - rename add_append() to set_append()
-	(since it can be used to remove a key)
-	  - add remove_append_simple()
-	usb is runned by rc.sysinit, and doesn't like "chkconfig --add" anymore
-
-	* install2.pm: {brltty}{device} is optional, default is ttyS0 or ttyS1 (?)
-	fix brltty support
-
-	* interactive/gtk.pm: set a minimum size for Gtk2::HScale's (mainly used
-	for resizing partitions)
-	fix $ok_clicked when there is no ok button
-	have less warnings when debugging
-
-2003/02/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Partial gtk2 update - still needs work on
-	TreeViews
-
-2003/02/20  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - Improved/fixed generation of printer list entries from
-	manufacturer-supplied PostScript PPD files
-	  - Removed forgotten debug mode
-	  - Disabled wizard-mode temporarily
-
-	* install_steps_interactive.pm: Made sure that printerdrake does not open
-	its main window when called during the preparation of the "Summary"
-	screen.
-
-2003/02/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/harddrake2: 
-	  - prevent any l10n problem by having only one path string when both
-	creating the menu and acessing a menu widget (aka translate menu
-	  paths only once), which also nicely cut down the translators job.
-	  - decrease diagnostics pragma verbosity (aka remove big fat warning
-	  messages)
-
-	* drakxtools.spec: 9.1-2mdk
-
-	* standalone/logdrake: fix #1829
-
-	* share/po/fr.po: further updates
-	translate all countrie names
-	update french translation
-
-2003/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk2.pm: ensure {box_size} is set (to have less warnings)
-
-	* diskdrake/interactive.pm, fsedit.pm: 
-	  - simplify check_mntpoint
-	  - fix checking mount point in Mount_point()
-
-	* interactive/gtk.pm, standalone/diskdrake, interactive.pm: have less
-	warnings when debugging
-
-	* Xconfig/card.pm: log why auto X config failed (needVideoRam)
-
-2003/02/19  alus
-
-	* share/po/pl.po: updated
-
-2003/02/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed if update fail to allow retry.
-	added code to retry finding an update medium if something went wrong.
-	add ugly probed type of network configuration.
-	make sure network::network:: is used (just in case)
-	add default configuration for network for summary.
-
-	* install_steps.pm: add simplified menu for desktop mode.
-
-	* pkgs.pm: added a missing sanity unwind.
-	add sanity code on error when reading hdlist (this will avoid update
-	medium
-	being trashed if an error occurred during hdlist download and so ...)
-
-	* crypto.pm: code slight reorganization.
-
-2003/02/19  gbeauchesne
-
-	* share/rpmsrate, share/compssUsers: 
-	  - Add localized help files for OpenOffice.org
-	  - Add new SPELLCHECK category for myspell spellchecking and
-	hyphenators
-
-	* mdk-stage1/Makefile: Enable all usual stage1-* BINS on x86-64. Add
-	dietlibc to DIRS too for that
-	arch. Fix rescue-gui build with $(DIET) wrapper.
-
-	* mdk-stage1/mar/Makefile: Rearrange build so that only mar binary is
-	built with glibc and other objects
-	with either glibc or dietlibc.
-
-2003/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* lang.pm: I'm stupid, we need to set UTF8 when there are two installed
-	langs with different encodings, not just when the additional
-	languages have different encoding than main one
-
-	* loopback.pm, any.pm, diskdrake/interactive.pm, fs.pm, install_steps.pm,
-	network/ethernet.pm, bootloader.pm, install_steps_interactive.pm,
-	diskdrake/hd_gtk.pm, lvm.pm, fsedit.pm, install2.pm,
-	network/drakfirewall.pm, raid.pm, install_interactive.pm,
-	install_any.pm, partition_table/raw.pm, partition_table.pm: to
-	workaround perl bug removing UTF8 flag when passing scalars to die's,
-	pass
-	a scalar-ref. but we need to de-ref, so it might break many things :).
-	let's make a prayer :).
-
-	* share/rpmsrate: add fonts-ttf-arabic when locale ar
-
-	* ugtk2.pm: set the destroy handler after wizard creation, or the fact
-	that
-	wizard window will overwrite existing window will also destroy
-	the destroy handler
-	fix some segfaults caused by still calling destroy
-	or other gtk functions after a destroy has been
-	already done, triggered by the user clicking on
-	the WM's "close this application" button (#1651)
-	better comply to look of text like in Gtk1 (text inside a Frame)
-	clean
-
-2003/02/19  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-	updated Uzbek file
-
-	* share/rpmsrate: Improved the locale->font selection;
-	added the tetex-latex-arab-doc package (previously was included in the
-	main)
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/uz.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sq.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated Uzbek file
-
-2003/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: don't log "warning: find_index failed in ..."
-
-	* install_steps.pm, install_steps_interactive.pm: add some more
-	formatError
-
-	* raid.pm: mkraid wants all the md devices written in raidtab to exist,
-	even if asking to
-	create a specific md
-	cleanup
-
-	* install_steps_auto_install.pm: add a formatError
-
-	* pixmaps/X.png: add it back (used by XFdrake)
-
-	* install_any.pm: use formatError
-
-	* install_interactive.pm: add some formatError's
-
-	* fsedit.pm, detect_devices.pm: 
-	  - cleanup & simplify
-	  - handle raid on raid detection
-
-	* interactive/gtk.pm: can't use $mainw->{ok}->clicked since $mainw->{ok}
-	doesn't always exist, set
-	{retval} and main_quit instead (the way it was done for double click, is
-	this
-	ok when pressing enter?)
-
-	* diskdrake/interactive.pm: use formatError on $err
-	use formatError($err) instead of $@
-	  - allow raid on raid (raid 10)
-	  - focus mount point in Mount_point
-	  - focus type in Type
-
-	* standalone/icons/ic82-tape-40.png, pixmaps/ic82-tape-40.png,
-	pixmaps/ic82-systemeplus-40.png,
-	standalone/icons/ic82-systemeplus-40.png: move some images from
-	standalone to pixmaps to have them both during install and after install
-	(images used by XFdrake)
-
-	* install_steps_gtk.pm: indent more the entries in the summary (as asked
-	by dadou)
-
-2003/02/19  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: 
-	  - perl_checker fixes
-	  - indent-region, untabify
-	  - comment workaround
-	workaround a drakx bug which don't always add bttv to /etc/modules
-
-	* standalone/scannerdrake: cleanup
-	fix embedding
-
-	* standalone/printerdrake: hide the icon when embedded to get more space
-	fix embedding and clean it up
-
-2003/02/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: make sure network::network:: is used (just
-	in case)
-	add default configuration for network for summary.
-
-2003/02/19  gbeauchesne
-
-	* share/rpmsrate, share/compssUsers: 
-	  - Add localized help files for OpenOffice.org
-	  - Add new SPELLCHECK category for myspell spellchecking and
-	hyphenators
-
-2003/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/de.po: fix typo (#1821)
-
-	* share/compssUsers: provide a minimum desrciption for Scientific
-	Workstation (#1814)
-
-	* share/themes-galaxy.rc: try to choose sensible values for insensitive
-	widgets
-
-2003/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: don't log "warning: find_index failed in ..."
-
-	* diskdrake/interactive.pm: 
-	  - allow raid on raid (raid 10)
-	  - focus mount point in Mount_point
-	  - focus type in Type
-
-	* raid.pm: mkraid wants all the md devices written in raidtab to exist,
-	even if asking to
-	create a specific md
-	cleanup
-
-	* detect_devices.pm, fsedit.pm: 
-	  - cleanup & simplify
-	  - handle raid on raid detection
-
-2003/02/19  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: 
-	  - perl_checker fixes
-	  - indent-region, untabify
-	  - comment workaround
-	workaround a drakx bug which don't always add bttv to /etc/modules
-
-2003/02/18  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* drakxtools.spec: new version
-
-	* network/network.pm: Get back configuration settings from conf files
-	(fix some kind of titi sucking)
-
-2003/02/18  gbeauchesne
-
-	* mdk-stage1/bzlib/Makefile, mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/insmod-modutils/Makefile, mdk-stage1/newt/Makefile,
-	mdk-stage1/slang/Makefile, mdk-stage1/mar/Makefile: 
-	  - Use minilibc on x86-64
-	  - mar requires bzlib to be built beforehand, especially if building
-	with
-	dietlibc
-	  - Nuke trickery to handle -DIET objects, everything is now built
-	through
-	  the diet driver, defined into $(DIET)
-
-	* mdk-stage1/dietlibc/include/net/ethernet.h: Add <net/ethernet.h> and
-	<linux/if_ether.h> so that dhcp.c can be compiled
-
-	* mdk-stage1/dietlibc/dietfeatures.h: Define WANT_TZFILE_PARSER so that
-	call to tset() in strftime() implementation
-	can be resolved.
-	Merge back small config file
-	Merge in CVS dietlibc 0.21 for IA-64 and X86-64 support. However, drop
-	the
-	following architectures we currently don't support: arm, mips, mipsel,
-	parisc,
-	s390, sparc64.
-
-	* mdk-stage1/dietlibc/syscalls.c/fchmod.c,
-	mdk-stage1/dietlibc/librpc/authunix_prot.c,
-	mdk-stage1/dietlibc/include/termio.h,
-	mdk-stage1/dietlibc/i386/sendmsg.S,
-	mdk-stage1/dietlibc/syscalls.c/syslog.c,
-	mdk-stage1/dietlibc/syscalls.c/setpriority.c,
-	mdk-stage1/dietlibc/lib/msgget.c, mdk-stage1/dietlibc/lib/longjmp.c,
-	mdk-stage1/dietlibc/lib/strerror.c, mdk-stage1/dietlibc/dieticonv.h,
-	mdk-stage1/dietlibc/i386/asin.S,
-	mdk-stage1/dietlibc/libpthread/pthread_flockfile.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyname.c,
-	mdk-stage1/dietlibc/alpha/__alarm.c,
-	mdk-stage1/dietlibc/librpc/rpc_prot.c,
-	mdk-stage1/dietlibc/libugly/getmntent.c,
-	mdk-stage1/dietlibc/lib/iscntrl.c, mdk-stage1/dietlibc/include/stdint.h,
-	mdk-stage1/dietlibc/i386/mmap64.S, mdk-stage1/dietlibc/lib/getservent.c,
-	mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/i386/strcmp.S,
-	mdk-stage1/dietlibc/syscalls.c/sigsuspend.c,
-	mdk-stage1/dietlibc/include/stdlib.h,
-	mdk-stage1/dietlibc/libugly/timezone.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cancel.c,
-	mdk-stage1/dietlibc/libdl/dlopen.c,
-	mdk-stage1/dietlibc/libugly/servent_buf.c,
-	mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/closedir.c,
-	mdk-stage1/dietlibc/libcruft/scan_ulong.c,
-	mdk-stage1/dietlibc/include/sys/prctl.h,
-	mdk-stage1/dietlibc/lib/alloc.c, mdk-stage1/dietlibc/lib/tcsetpgrp.c,
-	mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
-	mdk-stage1/dietlibc/i386/write12.S,
-	mdk-stage1/dietlibc/syscalls.c/mount.c,
-	mdk-stage1/dietlibc/syscalls.c/setdomainname.c,
-	mdk-stage1/dietlibc/libstdio/fwrite.c,
-	mdk-stage1/dietlibc/libdl/_dl_relocate.c, mdk-stage1/dietlibc/diet.c,
-	mdk-stage1/dietlibc/include/libgen.h,
-	mdk-stage1/dietlibc/i386/Makefile.add,
-	mdk-stage1/dietlibc/syscalls.s/bdflush.S,
-	mdk-stage1/dietlibc/i386/stpcpy.S, mdk-stage1/dietlibc/i386/ltostr.S,
-	mdk-stage1/dietlibc/syscalls.c/lchown.c,
-	mdk-stage1/dietlibc/libugly/utent.c, mdk-stage1/dietlibc/i386/connect.S,
-	mdk-stage1/dietlibc/include/sys/mman.h,
-	mdk-stage1/dietlibc/include/fcntl.h,
-	mdk-stage1/dietlibc/libdl/_dl_rel.c, mdk-stage1/dietlibc/lib/memchr.c,
-	mdk-stage1/dietlibc/lib/isupper.c,
-	mdk-stage1/dietlibc/libugly/asprintf.c,
-	mdk-stage1/dietlibc/libpthread/thread_key.c,
-	mdk-stage1/dietlibc/lib/errlist.c,
-	mdk-stage1/dietlibc/librpc/clnt_udp.c, mdk-stage1/dietlibc/i386/atan2.S,
-	mdk-stage1/dietlibc/lib/recvmsg.c, mdk-stage1/dietlibc/lib/qsort.c,
-	mdk-stage1/dietlibc/lib/sendto.c,
-	mdk-stage1/dietlibc/alpha/__testandset.S,
-	mdk-stage1/dietlibc/include/endian.h,
-	mdk-stage1/dietlibc/libstdio/vscanf.c,
-	mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/i386/atanh.S,
-	mdk-stage1/dietlibc/syscalls.s/mlock.S,
-	mdk-stage1/dietlibc/ppc/syscalls.h,
-	mdk-stage1/dietlibc/libstdio/stdin.c,
-	mdk-stage1/dietlibc/lib/__ptrace.c,
-	mdk-stage1/dietlibc/libstdio/scanf.c,
-	mdk-stage1/dietlibc/libdl/dlclose.c,
-	mdk-stage1/dietlibc/librpc/svc_raw.c,
-	mdk-stage1/dietlibc/include/arpa/nameser.h,
-	mdk-stage1/dietlibc/dietuglyweaks.h,
-	mdk-stage1/dietlibc/i386/copysign.S, mdk-stage1/dietlibc/i386/memcmp.S,
-	mdk-stage1/dietlibc/i386/htons.S, mdk-stage1/dietlibc/lib/open64.c,
-	mdk-stage1/dietlibc/include/stdarg-cruft.h,
-	mdk-stage1/dietlibc/libugly/hasmntopt.c,
-	mdk-stage1/dietlibc/dietdirent.h,
-	mdk-stage1/dietlibc/syscalls.c/setsid.c,
-	mdk-stage1/dietlibc/libpthread/pthread_testcancel.c,
-	mdk-stage1/dietlibc/libshell/realpath.c,
-	mdk-stage1/dietlibc/include/sys/file.h, mdk-stage1/dietlibc/lib/ftw.c,
-	mdk-stage1/dietlibc/i386/fmod.S, mdk-stage1/dietlibc/lib/tcsetattr.c,
-	mdk-stage1/dietlibc/i386/strrchr.S,
-	mdk-stage1/dietlibc/libcruft/bzero.c,
-	mdk-stage1/dietlibc/i386/recvfrom.S,
-	mdk-stage1/dietlibc/libstdio/ftell.c,
-	mdk-stage1/dietlibc/libstdio/fgets.c,
-	mdk-stage1/dietlibc/include/rpc/netdb.h,
-	mdk-stage1/dietlibc/libdl/_dl_load.c,
-	mdk-stage1/dietlibc/syscalls.c/getresgid.c,
-	mdk-stage1/dietlibc/syscalls.s/sendfile64.S,
-	mdk-stage1/dietlibc/lib/sscanf.c, mdk-stage1/dietlibc/lib/creat.c,
-	mdk-stage1/dietlibc/syscalls.c/sync.c,
-	mdk-stage1/dietlibc/lib/getdomainname.c,
-	mdk-stage1/dietlibc/syscalls.c/flock.c,
-	mdk-stage1/dietlibc/libugly/iconv.c,
-	mdk-stage1/dietlibc/libstdio/fclose.c,
-	mdk-stage1/dietlibc/libugly/getprotobyname.c,
-	mdk-stage1/dietlibc/libstdio/vprintf.c,
-	mdk-stage1/dietlibc/include/sys/sparc-ioctl.h,
-	mdk-stage1/dietlibc/libstdio/fdopen.c,
-	mdk-stage1/dietlibc/lib/vsnprintf.c,
-	mdk-stage1/dietlibc/libugly/dirfd.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_signal.c,
-	mdk-stage1/dietlibc/include/pwd.h, mdk-stage1/dietlibc/i386/atoll.S,
-	mdk-stage1/dietlibc/i386/accept.S, mdk-stage1/dietlibc/lib/ispunct.c,
-	mdk-stage1/dietlibc/syscalls.s/getegid32.S,
-	mdk-stage1/dietlibc/sparc/mmap.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setschedparam.c,
-	mdk-stage1/dietlibc/lib/snprintf.c,
-	mdk-stage1/dietlibc/include/sys/fsuid.h,
-	mdk-stage1/dietlibc/syscalls.s/ftruncate64.S,
-	mdk-stage1/dietlibc/i386/getsockopt.S,
-	mdk-stage1/dietlibc/syscalls.c/fchdir.c,
-	mdk-stage1/dietlibc/i386/unified.S,
-	mdk-stage1/dietlibc/libpthread/pthread_sigmask.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyaddr2_r.c,
-	mdk-stage1/dietlibc/syscalls.c/signal.c,
-	mdk-stage1/dietlibc/syscalls.c/munmap.c,
-	mdk-stage1/dietlibc/lib/llabs.c, mdk-stage1/dietlibc/lib/msgrcv.c,
-	mdk-stage1/dietlibc/i386/memccpy.S,
-	mdk-stage1/dietlibc/libugly/getservbyname.c,
-	mdk-stage1/dietlibc/include/write12.h, mdk-stage1/dietlibc/dietstdio.h,
-	mdk-stage1/dietlibc/alpha/start.S, mdk-stage1/dietlibc/i386/bind.S,
-	mdk-stage1/dietlibc/libpthread/pthread_key.c, mdk-stage1/dietlibc/BUGS,
-	mdk-stage1/dietlibc/syscalls.c/chown.c,
-	mdk-stage1/dietlibc/libcruft/setlocale.c,
-	mdk-stage1/dietlibc/librpc/xdr_array.c,
-	mdk-stage1/dietlibc/libcruft/__parse_1.c,
-	mdk-stage1/dietlibc/lib/__isnan.c,
-	mdk-stage1/dietlibc/include/sys/ptrace.h,
-	mdk-stage1/dietlibc/syscalls.s/setfsuid.S,
-	mdk-stage1/dietlibc/lib/tcflow.c,
-	mdk-stage1/dietlibc/syscalls.s/geteuid32.S,
-	mdk-stage1/dietlibc/lib/puts.c, mdk-stage1/dietlibc/CHANGES,
-	mdk-stage1/dietlibc/lib/mkfifo.c,
-	mdk-stage1/dietlibc/syscalls.c/utime.c,
-	mdk-stage1/dietlibc/lib/memccmp.c,
-	mdk-stage1/dietlibc/alpha/socketpair.S,
-	mdk-stage1/dietlibc/libcruft/scandir.c,
-	mdk-stage1/dietlibc/syscalls.s/getuid32.S,
-	mdk-stage1/dietlibc/lib/tolower.c,
-	mdk-stage1/dietlibc/include/sys/resource.h,
-	mdk-stage1/dietlibc/syscalls.c/access.c,
-	mdk-stage1/dietlibc/libcruft/getusershell.c,
-	mdk-stage1/dietlibc/i386/floor.S,
-	mdk-stage1/dietlibc/syscalls.s/alarm.S, mdk-stage1/dietlibc/lib/send.c,
-	mdk-stage1/dietlibc/sparc/sigaction.c, mdk-stage1/dietlibc/lib/execvp.c,
-	mdk-stage1/dietlibc/libpthread/pthread_join.c,
-	mdk-stage1/dietlibc/alpha/__longjmp.S,
-	mdk-stage1/dietlibc/libcruft/entlib.c,
-	mdk-stage1/dietlibc/libcruft/tmpnam.c,
-	mdk-stage1/dietlibc/syscalls.c/getppid.c,
-	mdk-stage1/dietlibc/libdl/_dl_alloc.c,
-	mdk-stage1/dietlibc/lib/setlinebuf.c,
-	mdk-stage1/dietlibc/libstdio/fopen.c,
-	mdk-stage1/dietlibc/librpc/get_myaddress.c,
-	mdk-stage1/dietlibc/lib/bcd.c, mdk-stage1/dietlibc/include/signal.h,
-	mdk-stage1/dietlibc/syscalls.c/fcntl.c,
-	mdk-stage1/dietlibc/libugly/mktime.c,
-	mdk-stage1/dietlibc/syscalls.s/fchown32.S,
-	mdk-stage1/dietlibc/libcruft/getopt_long_only.c,
-	mdk-stage1/dietlibc/syscalls.s/munlock.S,
-	mdk-stage1/dietlibc/libcruft/getgrent.c,
-	mdk-stage1/dietlibc/syscalls.c/poll.c,
-	mdk-stage1/dietlibc/sparc/__longjmp.S,
-	mdk-stage1/dietlibc/librpc/rpc_callmsg.c,
-	mdk-stage1/dietlibc/include/pthread.h,
-	mdk-stage1/dietlibc/libpthread/pthread_key_delete.c,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/libpthread/pthread_mutexattr_setkind_np.c,
-	mdk-stage1/dietlibc/ppc/clone.S, mdk-stage1/dietlibc/i386/clone.S,
-	mdk-stage1/dietlibc/libcruft/pwbuf.c,
-	mdk-stage1/dietlibc/syscalls.c/getrlimit.c,
-	mdk-stage1/dietlibc/i386/getpeername.S,
-	mdk-stage1/dietlibc/syscalls.c/setresuid.c,
-	mdk-stage1/dietlibc/syscalls.c/clone.c,
-	mdk-stage1/dietlibc/i386/mcount.S, mdk-stage1/dietlibc/lib/__dtostr.c,
-	mdk-stage1/dietlibc/syscalls.s/nice.S,
-	mdk-stage1/dietlibc/libcruft/grent.c, mdk-stage1/dietlibc/i386/ceil.S,
-	mdk-stage1/dietlibc/syscalls.c/vhangup.c,
-	mdk-stage1/dietlibc/include/sys/cdefs.h,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_fdatasync.c,
-	mdk-stage1/dietlibc/syscalls.c/getuid.c,
-	mdk-stage1/dietlibc/syscalls.s/getdents64.S,
-	mdk-stage1/dietlibc/librpc/svc_run.c,
-	mdk-stage1/dietlibc/libpthread/pthread_fgetc.c,
-	mdk-stage1/dietlibc/lib/adjtime.c,
-	mdk-stage1/dietlibc/syscalls.c/truncate.c,
-	mdk-stage1/dietlibc/include/net/if_ether.h,
-	mdk-stage1/dietlibc/lib/isblank.c, mdk-stage1/dietlibc/lib/strtof.c,
-	mdk-stage1/dietlibc/syscalls.s/time.S,
-	mdk-stage1/dietlibc/libugly/gmtime_r.c,
-	mdk-stage1/dietlibc/include/sys/shm.h,
-	mdk-stage1/dietlibc/include/sys/kd.h,
-	mdk-stage1/dietlibc/lib/errlistu.c, mdk-stage1/dietlibc/i386/expm1.S,
-	mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/syscalls.c/rename.c,
-	mdk-stage1/dietlibc/libstdio/vfscanf.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_timedwait.c,
-	mdk-stage1/dietlibc/librpc/bindresvport.c,
-	mdk-stage1/dietlibc/i386/cos.S, mdk-stage1/dietlibc/libstdio/fdglue.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyname_r.c,
-	mdk-stage1/dietlibc/lib/lseek64.c,
-	mdk-stage1/dietlibc/libdl/_dl_search.c,
-	mdk-stage1/dietlibc/syscalls.c/mknod.c, mdk-stage1/dietlibc/i386/fabs.S,
-	mdk-stage1/dietlibc/lib/ttyname.c,
-	mdk-stage1/dietlibc/syscalls.s/signal.S,
-	mdk-stage1/dietlibc/syscalls.s/create_module.S,
-	mdk-stage1/dietlibc/alpha/syscalls.h, mdk-stage1/dietlibc/i386/htonl.S,
-	mdk-stage1/dietlibc/libcruft/getspnam.c,
-	mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/i386/log10.S,
-	mdk-stage1/dietlibc/libugly/strsignal.c,
-	mdk-stage1/dietlibc/librpc/clnt_tcp.c, mdk-stage1/dietlibc/i386/pow.S,
-	mdk-stage1/dietlibc/libcruft/initgroups.c,
-	mdk-stage1/dietlibc/lib/sendmsg.c, mdk-stage1/dietlibc/lib/write12.c,
-	mdk-stage1/dietlibc/lib/cfsetospeed.c,
-	mdk-stage1/dietlibc/include/sys/stat.h,
-	mdk-stage1/dietlibc/libcruft/gethostbyaddr.c,
-	mdk-stage1/dietlibc/lib/__stime.c, mdk-stage1/dietlibc/i386/poly.S,
-	mdk-stage1/dietlibc/librpc/svc_udp.c,
-	mdk-stage1/dietlibc/libugly/netent.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyaddr_r.c,
-	mdk-stage1/dietlibc/syscalls.c/setpgid.c,
-	mdk-stage1/dietlibc/libugly/localtime_r.c,
-	mdk-stage1/dietlibc/libcruft/localeconv.c,
-	mdk-stage1/dietlibc/alpha/n_sigprocmask.S,
-	mdk-stage1/dietlibc/syscalls.c/gettimeofday.c,
-	mdk-stage1/dietlibc/libshell/fnmatch.c,
-	mdk-stage1/dietlibc/syscalls.c/mkdir.c,
-	mdk-stage1/dietlibc/syscalls.s/setresgid.S,
-	mdk-stage1/dietlibc/libstdio/feof.c,
-	mdk-stage1/dietlibc/libcruft/seteuid.c,
-	mdk-stage1/dietlibc/libstdio/puts.c,
-	mdk-stage1/dietlibc/syscalls.c/sigpending.c,
-	mdk-stage1/dietlibc/include/netdb.h, mdk-stage1/dietlibc/i386/memset.S,
-	mdk-stage1/dietlibc/syscalls.s/delete_module.S,
-	mdk-stage1/dietlibc/lib/semop.c, mdk-stage1/dietlibc/include/dirent.h,
-	mdk-stage1/dietlibc/syscalls.c/getpid.c,
-	mdk-stage1/dietlibc/libpthread/thread_internal.h,
-	mdk-stage1/dietlibc/libugly/ftime.c,
-	mdk-stage1/dietlibc/include/libintl.h, mdk-stage1/dietlibc/lib/rand_r.c,
-	mdk-stage1/dietlibc/libcruft/setegid.c,
-	mdk-stage1/dietlibc/syscalls.c/dup.c,
-	mdk-stage1/dietlibc/syscalls.c/fsync.c,
-	mdk-stage1/dietlibc/include/shadow.h,
-	mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/dietlibc/PORTING,
-	mdk-stage1/dietlibc/i386/ilogb.S, mdk-stage1/dietlibc/lib/strsep.c,
-	mdk-stage1/dietlibc/lib/opendir.c,
-	mdk-stage1/dietlibc/libpthread/pthread_equal.c,
-	mdk-stage1/dietlibc/libugly/system.c,
-	mdk-stage1/dietlibc/libpthread/pthread_getschedparam.c,
-	mdk-stage1/dietlibc/libcrypt/md5.c, mdk-stage1/dietlibc/i386/cbrt.S,
-	mdk-stage1/dietlibc/syscalls.s/ptrace.S,
-	mdk-stage1/dietlibc/libcruft/spent.c, mdk-stage1/dietlibc/i386/start.S,
-	mdk-stage1/dietlibc/syscalls.s/pivot_root.S,
-	mdk-stage1/dietlibc/include/rpc/auth_unix.h,
-	mdk-stage1/dietlibc/libdl/elf_hash.h,
-	mdk-stage1/dietlibc/include/dlfcn.h,
-	mdk-stage1/dietlibc/syscalls.c/nanosleep.c,
-	mdk-stage1/dietlibc/lib/usleep.c, mdk-stage1/dietlibc/include/md5.h,
-	mdk-stage1/dietlibc/lib/strchr.c, mdk-stage1/dietlibc/lib/msgsnd.c,
-	mdk-stage1/dietlibc/include/cpio.h,
-	mdk-stage1/dietlibc/syscalls.s/chown32.S,
-	mdk-stage1/dietlibc/ppc/unified.S,
-	mdk-stage1/dietlibc/libugly/gai_strerror.c,
-	mdk-stage1/dietlibc/syscalls.c/sethostname.c,
-	mdk-stage1/dietlibc/syscalls.c/geteuid.c,
-	mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
-	mdk-stage1/dietlibc/i386/rint.S, mdk-stage1/dietlibc/libugly/ptsname.c,
-	mdk-stage1/dietlibc/lib/ipv6constants.c,
-	mdk-stage1/dietlibc/syscalls.s/waitpid.S,
-	mdk-stage1/dietlibc/libstdio/fdprintf.c,
-	mdk-stage1/dietlibc/lib/sigpending.c,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_fcntl.c,
-	mdk-stage1/dietlibc/lib/memset.c, mdk-stage1/dietlibc/lib/__fstat64.c,
-	mdk-stage1/dietlibc/include/sched.h,
-	mdk-stage1/dietlibc/i386/syscalls.h, mdk-stage1/dietlibc/dirstream.h,
-	mdk-stage1/dietlibc/i386/socketpair.S, mdk-stage1/dietlibc/CAVEAT,
-	mdk-stage1/dietlibc/include/float.h,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setschedpolicy.c,
-	mdk-stage1/dietlibc/libstdio/fscanf.c,
-	mdk-stage1/dietlibc/syscalls.c/setitimer.c,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_alloc.c,
-	mdk-stage1/dietlibc/i386/hypot.S,
-	mdk-stage1/dietlibc/libpthread/Makefile,
-	mdk-stage1/dietlibc/lib/pread.c, mdk-stage1/dietlibc/lib/accept.c,
-	mdk-stage1/dietlibc/i386/mmap.c,
-	mdk-stage1/dietlibc/syscalls.c/setresgid.c,
-	mdk-stage1/dietlibc/sparc/setjmp.S, mdk-stage1/dietlibc/.cvsignore,
-	mdk-stage1/dietlibc/librpc/pmap_rmt.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setscope.c,
-	mdk-stage1/dietlibc/lib/sigtimedwait.c, mdk-stage1/dietlibc/i386/cosh.S,
-	mdk-stage1/dietlibc/include/sys/ioctl.h,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigpending.S,
-	mdk-stage1/dietlibc/lib/__ltostr.c,
-	mdk-stage1/dietlibc/include/sys/ppc-ioctl.h,
-	mdk-stage1/dietlibc/syscalls.s/ptrace.s,
-	mdk-stage1/dietlibc/libpthread/pthread_setcanceltype.c,
-	mdk-stage1/dietlibc/lib/exec_lib.c,
-	mdk-stage1/dietlibc/libstdio/vfdprintf.c,
-	mdk-stage1/dietlibc/lib/strlen.c, mdk-stage1/dietlibc/libregex/rx.c,
-	mdk-stage1/dietlibc/liblatin1/latin1-islower.c,
-	mdk-stage1/dietlibc/lib/memmem.c, mdk-stage1/dietlibc/include/string.h,
-	mdk-stage1/dietlibc/lib/raise.c, mdk-stage1/dietlibc/i386/usleep.S,
-	mdk-stage1/dietlibc/include/iconv.h,
-	mdk-stage1/dietlibc/libpthread/pthread_setspecific.c,
-	mdk-stage1/dietlibc/lib/semget.c,
-	mdk-stage1/dietlibc/syscalls.s/setregid32.S,
-	mdk-stage1/dietlibc/syscalls.c/swapoff.c,
-	mdk-stage1/dietlibc/libpthread/pthread_atfork.c,
-	mdk-stage1/dietlibc/libcruft/tempnam.c,
-	mdk-stage1/dietlibc/libcruft/inet_aton.c,
-	mdk-stage1/dietlibc/lib/sigismember.c, mdk-stage1/dietlibc/librpc/svc.c,
-	mdk-stage1/dietlibc/lib/set_errno.c,
-	mdk-stage1/dietlibc/syscalls.c/execve.c,
-	mdk-stage1/dietlibc/lib/sigemptyset.c,
-	mdk-stage1/dietlibc/include/sys/vfs.h, mdk-stage1/dietlibc/SECURITY,
-	mdk-stage1/dietlibc/include/sys/timex.h,
-	mdk-stage1/dietlibc/libugly/getprotoent.c,
-	mdk-stage1/dietlibc/lib/__stat64.c, mdk-stage1/dietlibc/include/elf.h,
-	mdk-stage1/dietlibc/lib/strncmp.c, mdk-stage1/dietlibc/include/assert.h,
-	mdk-stage1/dietlibc/lib/gethostname.c,
-	mdk-stage1/dietlibc/i386/dyn_syscalls.S,
-	mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
-	mdk-stage1/dietlibc/THANKS, mdk-stage1/dietlibc/libcruft/getgrgid_r.c,
-	mdk-stage1/dietlibc/lib/connect.c,
-	mdk-stage1/dietlibc/libcruft/sysconf.c,
-	mdk-stage1/dietlibc/lib/perror.c, mdk-stage1/dietlibc/include/locale.h,
-	mdk-stage1/dietlibc/syscalls.c/getresuid.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_init.c,
-	mdk-stage1/dietlibc/syscalls.c/sigaction.c,
-	mdk-stage1/dietlibc/include/tar.h, mdk-stage1/dietlibc/lib/execl.c,
-	mdk-stage1/dietlibc/include/time.h,
-	mdk-stage1/dietlibc/libstdio/setvbuf.c,
-	mdk-stage1/dietlibc/lib/tcflush.c, mdk-stage1/dietlibc/lib/strtold.c,
-	mdk-stage1/dietlibc/libugly/getprotoent_r.c,
-	mdk-stage1/dietlibc/syscalls.s/setfsgid32.S,
-	mdk-stage1/dietlibc/syscalls.s/prctl.S,
-	mdk-stage1/dietlibc/lib/strncasecmp.c,
-	mdk-stage1/dietlibc/syscalls.c/close.c,
-	mdk-stage1/dietlibc/libpthread/README,
-	mdk-stage1/dietlibc/lib/__lltostr.c, mdk-stage1/dietlibc/lib/vprintf.c,
-	mdk-stage1/dietlibc/i386/acos.S,
-	mdk-stage1/dietlibc/libpthread/pthread_funlockfile.c,
-	mdk-stage1/dietlibc/libcruft/getlogin.c,
-	mdk-stage1/dietlibc/libpthread/thread_internal.c,
-	mdk-stage1/dietlibc/libpthread/pthread_key_create.c,
-	mdk-stage1/dietlibc/libcruft/herror.c,
-	mdk-stage1/dietlibc/syscalls.c/dup2.c,
-	mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/strtod.c,
-	mdk-stage1/dietlibc/lib/strcpy.c, mdk-stage1/dietlibc/libdl/_dl_open.c,
-	mdk-stage1/dietlibc/libcruft/bcopy.c,
-	mdk-stage1/dietlibc/include/stdio.h,
-	mdk-stage1/dietlibc/syscalls.c/chroot.c,
-	mdk-stage1/dietlibc/libcruft/__parse_ws.c,
-	mdk-stage1/dietlibc/include/fnmatch.h,
-	mdk-stage1/dietlibc/alpha/sigprocmask.S,
-	mdk-stage1/dietlibc/libcruft/res_mkquery.c,
-	mdk-stage1/dietlibc/include/sys/timeb.h,
-	mdk-stage1/dietlibc/i386/sendto.S,
-	mdk-stage1/dietlibc/libugly/iconv_close.c,
-	mdk-stage1/dietlibc/i386/sleep.S,
-	mdk-stage1/dietlibc/libugly/time_table_spd.c,
-	mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/libdl/dlsym.c,
-	mdk-stage1/dietlibc/libstdio/stderr.c,
-	mdk-stage1/dietlibc/libdl/dlerror.c,
-	mdk-stage1/dietlibc/lib/setsockopt.c,
-	mdk-stage1/dietlibc/i386/shutdown.S,
-	mdk-stage1/dietlibc/libcruft/mkstemp.c,
-	mdk-stage1/dietlibc/libstdio/ungetc.c,
-	mdk-stage1/dietlibc/syscalls.c/fork.c,
-	mdk-stage1/dietlibc/libpthread/pthread_setcancelstate.c,
-	mdk-stage1/dietlibc/i386/sinh.S,
-	mdk-stage1/dietlibc/libcruft/inet_ntoa.c,
-	mdk-stage1/dietlibc/libugly/tzfile.c,
-	mdk-stage1/dietlibc/syscalls.c/getgroups.c,
-	mdk-stage1/dietlibc/i386/memchr.S,
-	mdk-stage1/dietlibc/libugly/getservent.c, mdk-stage1/dietlibc/diet.1,
-	mdk-stage1/dietlibc/include/rpc/xdr.h,
-	mdk-stage1/dietlibc/libugly/putpwent.c,
-	mdk-stage1/dietlibc/libdl/_dl_rel.h,
-	mdk-stage1/dietlibc/libcruft/getspent_r.c,
-	mdk-stage1/dietlibc/include/rpc/key_prot.h,
-	mdk-stage1/dietlibc/syscalls.c/setgid.c,
-	mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/execle.c,
-	mdk-stage1/dietlibc/i386/__ten.S, mdk-stage1/dietlibc/include/grp.h,
-	mdk-stage1/dietlibc/lib/random.c, mdk-stage1/dietlibc/i386/send.S,
-	mdk-stage1/dietlibc/include/sys/s390-ioctl.h,
-	mdk-stage1/dietlibc/libcruft/killpg.c,
-	mdk-stage1/dietlibc/sparc/start.S,
-	mdk-stage1/dietlibc/syscalls.s/setresuid.S,
-	mdk-stage1/dietlibc/libcruft/getpwnam.c,
-	mdk-stage1/dietlibc/lib/isprint.c, mdk-stage1/dietlibc/i386/recvmsg.S,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigqueueinfo.S,
-	mdk-stage1/dietlibc/libstdio/fsetpos.c,
-	mdk-stage1/dietlibc/i386/md5asm.S, mdk-stage1/dietlibc/i386/isleap.S,
-	mdk-stage1/dietlibc/i386/PIC.h,
-	mdk-stage1/dietlibc/libpthread/pthread_spinlock.c,
-	mdk-stage1/dietlibc/syscalls.c/pipe.c,
-	mdk-stage1/dietlibc/syscalls.c/ioctl.c,
-	mdk-stage1/dietlibc/syscalls.c/fchown.c,
-	mdk-stage1/dietlibc/i386/memcpy.S,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigtimedwait.S,
-	mdk-stage1/dietlibc/libcruft/__parse.c,
-	mdk-stage1/dietlibc/lib/__getcwd.c, mdk-stage1/dietlibc/lib/isdigit.c,
-	mdk-stage1/dietlibc/include/sys/un.h,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_lock.c,
-	mdk-stage1/dietlibc/syscalls.s/sigaction.S,
-	mdk-stage1/dietlibc/libcruft/getspnam_r.c,
-	mdk-stage1/dietlibc/lib/semctl.c, mdk-stage1/dietlibc/lib/tcsendbreak.c,
-	mdk-stage1/dietlibc/include/rpc/rpc.h,
-	mdk-stage1/dietlibc/syscalls.s/getgid32.S,
-	mdk-stage1/dietlibc/libpthread/pthread_fdglue2.c,
-	mdk-stage1/dietlibc/syscalls.c/waitpid.c,
-	mdk-stage1/dietlibc/alpha/unified.S, mdk-stage1/dietlibc/lib/strstr.c,
-	mdk-stage1/dietlibc/syscalls.c/socketcall.c,
-	mdk-stage1/dietlibc/include/rpc/pmap_rmt.h,
-	mdk-stage1/dietlibc/include/sys/io.h, mdk-stage1/dietlibc/findcflags.sh,
-	mdk-stage1/dietlibc/libcruft/inet_pton.c,
-	mdk-stage1/dietlibc/i386/tanh.S, mdk-stage1/dietlibc/lib/getsockname.c,
-	mdk-stage1/dietlibc/libugly/grantpt.c,
-	mdk-stage1/dietlibc/i386/strcat.S,
-	mdk-stage1/dietlibc/lib/siginterrupt.c,
-	mdk-stage1/dietlibc/libcruft/dnscruft3.c,
-	mdk-stage1/dietlibc/syscalls.c/link.c,
-	mdk-stage1/dietlibc/libugly/difftime.c,
-	mdk-stage1/dietlibc/include/utmp.h,
-	mdk-stage1/dietlibc/libstdio/ftello.c,
-	mdk-stage1/dietlibc/syscalls.c/sigprocmask.c,
-	mdk-stage1/dietlibc/lib/rand48.c, mdk-stage1/dietlibc/lib/sleep.c,
-	mdk-stage1/dietlibc/i386/__testandset.S,
-	mdk-stage1/dietlibc/syscalls.s/setresgid32.S,
-	mdk-stage1/dietlibc/libugly/asctime_r.c,
-	mdk-stage1/dietlibc/syscalls.s/lchown32.S,
-	mdk-stage1/dietlibc/libcruft/entlib.h,
-	mdk-stage1/dietlibc/lib/sprintf.c,
-	mdk-stage1/dietlibc/libcruft/dnscruft.c,
-	mdk-stage1/dietlibc/syscalls.c/setgroups.c,
-	mdk-stage1/dietlibc/libugly/getservbyname_r.c,
-	mdk-stage1/dietlibc/syscalls.s/sigpending.S,
-	mdk-stage1/dietlibc/lib/tcdrain.c, mdk-stage1/dietlibc/libcruft/clock.c,
-	mdk-stage1/dietlibc/include/netinet/in.h,
-	mdk-stage1/dietlibc/syscalls.s/settimeofday.S,
-	mdk-stage1/dietlibc/syscalls.s/sendfile.S,
-	mdk-stage1/dietlibc/i386/socket.S,
-	mdk-stage1/dietlibc/libugly/protoent_buf.c,
-	mdk-stage1/dietlibc/include/sys/time.h,
-	mdk-stage1/dietlibc/lib/errno_location.c,
-	mdk-stage1/dietlibc/include/sys/msg.h,
-	mdk-stage1/dietlibc/liblatin1/latin1-isprint.c,
-	mdk-stage1/dietlibc/libstdio/fgetpos.c,
-	mdk-stage1/dietlibc/libshell/glob.c,
-	mdk-stage1/dietlibc/libugly/getprotobynumber_r.c,
-	mdk-stage1/dietlibc/sparc/strlen.S,
-	mdk-stage1/dietlibc/include/rpc/svc.h,
-	mdk-stage1/dietlibc/include/netinet/ip.h,
-	mdk-stage1/dietlibc/include/sys/gmon.h,
-	mdk-stage1/dietlibc/syscalls.c/wait4.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_broadcast.c,
-	mdk-stage1/dietlibc/i386/acosh.S, mdk-stage1/dietlibc/lib/sigprocmask.c,
-	mdk-stage1/dietlibc/lib/_brk.c,
-	mdk-stage1/dietlibc/syscalls.c/getegid.c,
-	mdk-stage1/dietlibc/syscalls.c/uname.c,
-	mdk-stage1/dietlibc/syscalls.s/mmap2.S,
-	mdk-stage1/dietlibc/libcruft/getpagesize.c,
-	mdk-stage1/dietlibc/sparc/unified.S,
-	mdk-stage1/dietlibc/libcruft/dn_expand.c,
-	mdk-stage1/dietlibc/i386/sqrt.S, mdk-stage1/dietlibc/lib/binshstr.c,
-	mdk-stage1/dietlibc/syscalls.s/exit.S, mdk-stage1/dietlibc/lib/execlp.c,
-	mdk-stage1/dietlibc/libstdio/fread.c,
-	mdk-stage1/dietlibc/include/netinet/udp.h, mdk-stage1/dietlibc/start.h,
-	mdk-stage1/dietlibc/lib/sys_siglist.c,
-	mdk-stage1/dietlibc/i386/strlen.S,
-	mdk-stage1/dietlibc/syscalls.c/ftruncate.c,
-	mdk-stage1/dietlibc/librpc/xdr.c, mdk-stage1/dietlibc/lib/__xmknod.c,
-	mdk-stage1/dietlibc/syscalls.s/pwrite.S,
-	mdk-stage1/dietlibc/libcruft/getgrnam.c,
-	mdk-stage1/dietlibc/lib/strtok.c,
-	mdk-stage1/dietlibc/syscalls.s/setreuid32.S,
-	mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/lib/reboot.c,
-	mdk-stage1/dietlibc/syscalls.c/write.c,
-	mdk-stage1/dietlibc/libugly/getprotobyname_r.c,
-	mdk-stage1/dietlibc/syscalls.s/errlist.S,
-	mdk-stage1/dietlibc/librpc/svc_auth_unix.c,
-	mdk-stage1/dietlibc/libshell/dirname.c,
-	mdk-stage1/dietlibc/libcruft/res_search.c,
-	mdk-stage1/dietlibc/i386/getenv.S, mdk-stage1/dietlibc/i386/exp10.S,
-	mdk-stage1/dietlibc/include/errno.h,
-	mdk-stage1/dietlibc/libdl/_dl_queue.c,
-	mdk-stage1/dietlibc/include/sys/uio.h,
-	mdk-stage1/dietlibc/lib/socketpair.c,
-	mdk-stage1/dietlibc/librpc/pmap_getport.c,
-	mdk-stage1/dietlibc/dyn_start.c, mdk-stage1/dietlibc/i386/ldexp.S,
-	mdk-stage1/dietlibc/dietlibm.h, mdk-stage1/dietlibc/libstdio/printf.c,
-	mdk-stage1/dietlibc/libstdio/ftello64.c,
-	mdk-stage1/dietlibc/libpthread/pthread_fputc.c,
-	mdk-stage1/dietlibc/syscalls.c/exit.c,
-	mdk-stage1/dietlibc/include/sys/times.h,
-	mdk-stage1/dietlibc/include/unistd.h, mdk-stage1/dietlibc/lib/isascii.c,
-	mdk-stage1/dietlibc/syscalls.c/chdir.c,
-	mdk-stage1/dietlibc/libugly/daemon.c,
-	mdk-stage1/dietlibc/lib/sigaddset.c,
-	mdk-stage1/dietlibc/syscalls.c/reboot.c,
-	mdk-stage1/dietlibc/lib/sigjmp.c, mdk-stage1/dietlibc/i386/strchr.S,
-	mdk-stage1/dietlibc/syscalls.c/getdents.c,
-	mdk-stage1/dietlibc/libstdio/fdglue2.c,
-	mdk-stage1/dietlibc/i386/strcpy.S, mdk-stage1/dietlibc/lib/getopt.c,
-	mdk-stage1/dietlibc/libcruft/getgrent_r.c,
-	mdk-stage1/dietlibc/librpc/xdr_reference.c,
-	mdk-stage1/dietlibc/include/netinet/tcp.h,
-	mdk-stage1/dietlibc/lib/pwrite64.c,
-	mdk-stage1/dietlibc/syscalls.c/kill.c,
-	mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/TODO,
-	mdk-stage1/dietlibc/include/sys/syslog.h,
-	mdk-stage1/dietlibc/libcruft/res_query.c,
-	mdk-stage1/dietlibc/lib/bind.c,
-	mdk-stage1/dietlibc/lib/if_indextoname.c,
-	mdk-stage1/dietlibc/syscalls.c/readlink.c,
-	mdk-stage1/dietlibc/libcrypt/crypt.c,
-	mdk-stage1/dietlibc/libugly/unlockpt.c,
-	mdk-stage1/dietlibc/libstdio/fflush.c,
-	mdk-stage1/dietlibc/libdl/Makefile,
-	mdk-stage1/dietlibc/include/rpc/pmap_prot.h,
-	mdk-stage1/dietlibc/libugly/popen.c,
-	mdk-stage1/dietlibc/libstdio/fputc_unlocked.c,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_trylock.c,
-	mdk-stage1/dietlibc/syscalls.c/swapon.c,
-	mdk-stage1/dietlibc/lib/alarm.c, mdk-stage1/dietlibc/ppc/mmap.c,
-	mdk-stage1/dietlibc/librpc/svc_simple.c,
-	mdk-stage1/dietlibc/libcruft/sysconf_cpus.c,
-	mdk-stage1/dietlibc/include/sys/poll.h,
-	mdk-stage1/dietlibc/libugly/freeaddrinfo.c,
-	mdk-stage1/dietlibc/libcruft/getpwuid_r.c,
-	mdk-stage1/dietlibc/syscalls.c/_llseek.c,
-	mdk-stage1/dietlibc/lib/lockf.c,
-	mdk-stage1/dietlibc/librpc/getrpcport.c,
-	mdk-stage1/dietlibc/lib/htons.c, mdk-stage1/dietlibc/librpc/auth_none.c,
-	mdk-stage1/dietlibc/syscalls.c/getpgid.c,
-	mdk-stage1/dietlibc/libcruft/hstrerror.c,
-	mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/libcruft/grbuf.c,
-	mdk-stage1/dietlibc/lib/pread64.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setinheritsched.c,
-	mdk-stage1/dietlibc/i386/setjmp.S,
-	mdk-stage1/dietlibc/syscalls.s/ioperm.S,
-	mdk-stage1/dietlibc/lib/getenv.c,
-	mdk-stage1/dietlibc/include/features.h,
-	mdk-stage1/dietlibc/lib/strtoll.c, mdk-stage1/dietlibc/sparc/syscalls.h,
-	mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/bsearch.c,
-	mdk-stage1/dietlibc/libstdio/fseeko64.c,
-	mdk-stage1/dietlibc/libcruft/pwent.c,
-	mdk-stage1/dietlibc/lib/strcasecmp.c,
-	mdk-stage1/dietlibc/libcruft/getgrnam_r.c,
-	mdk-stage1/dietlibc/syscalls.c/getrusage.c,
-	mdk-stage1/dietlibc/libpthread/CHANGES, mdk-stage1/dietlibc/i386/log.S,
-	mdk-stage1/dietlibc/lib/sigsuspend.c,
-	mdk-stage1/dietlibc/alpha/lseek64.S,
-	mdk-stage1/dietlibc/syscalls.c/mprotect.c,
-	mdk-stage1/dietlibc/sparc/shmat.c,
-	mdk-stage1/dietlibc/syscalls.c/_newselect.c,
-	mdk-stage1/dietlibc/i386/strncmp.S,
-	mdk-stage1/dietlibc/syscalls.s/setfsuid32.S,
-	mdk-stage1/dietlibc/libcruft/getspent.c,
-	mdk-stage1/dietlibc/i386/recv.S,
-	mdk-stage1/dietlibc/librpc/pmap_getmaps.c,
-	mdk-stage1/dietlibc/syscalls.c/setrlimit.c,
-	mdk-stage1/dietlibc/ppc/__testandset.S,
-	mdk-stage1/dietlibc/threadsafe.sh,
-	mdk-stage1/dietlibc/syscalls.s/__pwrite.S,
-	mdk-stage1/dietlibc/libugly/setenv.c,
-	mdk-stage1/dietlibc/libugly/iconv_open.c,
-	mdk-stage1/dietlibc/include/arpa/inet.h,
-	mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/memrchr.c,
-	mdk-stage1/dietlibc/lib/strtoul.c,
-	mdk-stage1/dietlibc/syscalls.s/epoll_wait.S,
-	mdk-stage1/dietlibc/syscalls.c/getgid.c,
-	mdk-stage1/dietlibc/libcruft/mktemp.c,
-	mdk-stage1/dietlibc/libugly/wtent.c,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigsuspend.S,
-	mdk-stage1/dietlibc/libcruft/__end_parse.c,
-	mdk-stage1/dietlibc/syscalls.s/adjtimex.S,
-	mdk-stage1/dietlibc/libstdio/fprintf.c,
-	mdk-stage1/dietlibc/libdl/README, mdk-stage1/dietlibc/include/regex.h,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_wait.c,
-	mdk-stage1/dietlibc/i386/exp2.S, mdk-stage1/dietlibc/i386/mmap.S,
-	mdk-stage1/dietlibc/libcruft/alphasort.c,
-	mdk-stage1/dietlibc/syscalls.c/umask.c,
-	mdk-stage1/dietlibc/librpc/clnt_generic.c,
-	mdk-stage1/dietlibc/syscalls.s/getgroups32.S,
-	mdk-stage1/dietlibc/i386/atol.S, mdk-stage1/dietlibc/lib/memmove.c,
-	mdk-stage1/dietlibc/sparc/pipe.S,
-	mdk-stage1/dietlibc/include/sys/ucontext.h,
-	mdk-stage1/dietlibc/include/daemon.h,
-	mdk-stage1/dietlibc/lib/__stat64_cvt.c,
-	mdk-stage1/dietlibc/liblatin1/latin1-isgraph.c,
-	mdk-stage1/dietlibc/libcruft/inet_ntop.c,
-	mdk-stage1/dietlibc/include/getopt.h,
-	mdk-stage1/dietlibc/libugly/openpty.c,
-	mdk-stage1/dietlibc/include/math.h,
-	mdk-stage1/dietlibc/libcruft/dnscruft4.c,
-	mdk-stage1/dietlibc/lib/remove.c, mdk-stage1/dietlibc/libugly/isleap.c,
-	mdk-stage1/dietlibc/include/sys/mips-ioctl.h,
-	mdk-stage1/dietlibc/include/sys/sendfile.h,
-	mdk-stage1/dietlibc/syscalls.s/getresgid32.S,
-	mdk-stage1/dietlibc/include/netinet/ip_icmp.h,
-	mdk-stage1/dietlibc/lib/atoll.c,
-	mdk-stage1/dietlibc/syscalls.s/syslog.S,
-	mdk-stage1/dietlibc/lib/sigqueueinfo.c,
-	mdk-stage1/dietlibc/libcruft/__prepare_parse.c,
-	mdk-stage1/dietlibc/lib/getpeername.c,
-	mdk-stage1/dietlibc/libcruft/getopt_long.c,
-	mdk-stage1/dietlibc/include/sys/ipc.h,
-	mdk-stage1/dietlibc/i386/setsockopt.S,
-	mdk-stage1/dietlibc/libstdio/fputc.c, mdk-stage1/dietlibc/lib/rand.c,
-	mdk-stage1/dietlibc/alpha/sigaction.c,
-	mdk-stage1/dietlibc/include/sys/gmon_out.h,
-	mdk-stage1/dietlibc/libstdio/vfprintf.c,
-	mdk-stage1/dietlibc/alpha/signal.S,
-	mdk-stage1/dietlibc/libugly/getservent_r.c,
-	mdk-stage1/dietlibc/i386/socketcall.S,
-	mdk-stage1/dietlibc/lib/cfsetispeed.c,
-	mdk-stage1/dietlibc/alpha/Makefile.add,
-	mdk-stage1/dietlibc/include/net/if.h,
-	mdk-stage1/dietlibc/lib/recvfrom.c,
-	mdk-stage1/dietlibc/libstdio/fgetc.c, mdk-stage1/dietlibc/include/ftw.h,
-	mdk-stage1/dietlibc/libcruft/mkdtemp.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyname2_r.c,
-	mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/lib/labs.c,
-	mdk-stage1/dietlibc/syscalls.c/getcwd.c,
-	mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/librpc/xdr_stdio.c,
-	mdk-stage1/dietlibc/syscalls.c/mremap.c,
-	mdk-stage1/dietlibc/libshell/basename.c,
-	mdk-stage1/dietlibc/lib/memccpy.c,
-	mdk-stage1/dietlibc/libugly/getservbyport.c,
-	mdk-stage1/dietlibc/lib/strtoull.c,
-	mdk-stage1/dietlibc/libcruft/getgrgid.c,
-	mdk-stage1/dietlibc/syscalls.c/symlink.c,
-	mdk-stage1/dietlibc/librpc/auth_unix.c,
-	mdk-stage1/dietlibc/libugly/getaddrinfo.c,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/include/strings.h,
-	mdk-stage1/dietlibc/syscalls.c/open.c, mdk-stage1/dietlibc/dyn_stop.c,
-	mdk-stage1/dietlibc/lib/__truncate64.c, mdk-stage1/dietlibc/lib/execv.c,
-	mdk-stage1/dietlibc/libdl/elf_hash.c,
-	mdk-stage1/dietlibc/include/sys/param.h,
-	mdk-stage1/dietlibc/syscalls.c/read.c,
-	mdk-stage1/dietlibc/libcrypt/md5crypt.c,
-	mdk-stage1/dietlibc/include/sys/hppa-ioctl.h,
-	mdk-stage1/dietlibc/syscalls.s/fdatasync.S,
-	mdk-stage1/dietlibc/libcruft/spbuf.c,
-	mdk-stage1/dietlibc/syscalls.s/n_sigsuspend.S,
-	mdk-stage1/dietlibc/syscalls.s/errno.S,
-	mdk-stage1/dietlibc/syscalls.s/setfsgid.S,
-	mdk-stage1/dietlibc/syscalls.c/setuid.c,
-	mdk-stage1/dietlibc/librpc/clnt_raw.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setstacksize.c,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_init.c,
-	mdk-stage1/dietlibc/librpc/xdr_mem.c,
-	mdk-stage1/dietlibc/syscalls.s/n_sigpending.S,
-	mdk-stage1/dietlibc/lib/sigaction.c, mdk-stage1/dietlibc/i386/listen.S,
-	mdk-stage1/dietlibc/libstdio/stdout.c,
-	mdk-stage1/dietlibc/libdl/_dl_main.c,
-	mdk-stage1/dietlibc/lib/if_nameindex.c,
-	mdk-stage1/dietlibc/syscalls.s/truncate64.S,
-	mdk-stage1/dietlibc/include/sys/alpha-ioctl.h,
-	mdk-stage1/dietlibc/binshstr.h, mdk-stage1/dietlibc/libcruft/res_init.c,
-	mdk-stage1/dietlibc/libpthread/pthread_detach.c,
-	mdk-stage1/dietlibc/libpthread/pthread_internal.c,
-	mdk-stage1/dietlibc/README, mdk-stage1/dietlibc/libcruft/__parse_nws.c,
-	mdk-stage1/dietlibc/lib/readdir64.c, mdk-stage1/dietlibc/i386/tan.S,
-	mdk-stage1/dietlibc/syscalls.c/getpriority.c,
-	mdk-stage1/dietlibc/libcruft/herrno_location.c,
-	mdk-stage1/dietlibc/lib/shmctl.c,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_unlock.c,
-	mdk-stage1/dietlibc/librpc/xdr_rec.c,
-	mdk-stage1/dietlibc/i386/strncpy.S,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_tcdrain.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_destroy.c,
-	mdk-stage1/dietlibc/syscalls.s/setuid32.S,
-	mdk-stage1/dietlibc/lib/__v_printf.c,
-	mdk-stage1/dietlibc/libugly/gethostent.c,
-	mdk-stage1/dietlibc/syscalls.s/epoll_create.S,
-	mdk-stage1/dietlibc/include/rpc/rpc_msg.h,
-	mdk-stage1/dietlibc/lib/isatty.c,
-	mdk-stage1/dietlibc/syscalls.s/msync.S,
-	mdk-stage1/dietlibc/include/sys/mtio.h, mdk-stage1/dietlibc/syscalls.h,
-	mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/toupper.c,
-	mdk-stage1/dietlibc/syscalls.s/epoll_ctl.S,
-	mdk-stage1/dietlibc/include/sys/sysmacros.h,
-	mdk-stage1/dietlibc/include/sys/sysinfo.h,
-	mdk-stage1/dietlibc/librpc/clnt_simple.c,
-	mdk-stage1/dietlibc/syscalls.s/madvise.S,
-	mdk-stage1/dietlibc/libugly/getservbyport_r.c,
-	mdk-stage1/dietlibc/lib/vfork.c,
-	mdk-stage1/dietlibc/libcruft/getopt_data.c,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_open.c,
-	mdk-stage1/dietlibc/lib/isalpha.c, mdk-stage1/dietlibc/lib/pwrite.c,
-	mdk-stage1/dietlibc/lib/sigfillset.c,
-	mdk-stage1/dietlibc/libcruft/getpwent_r.c,
-	mdk-stage1/dietlibc/i386/log1p.S, mdk-stage1/dietlibc/lib/listen.c,
-	mdk-stage1/dietlibc/lib/strncpy.c, mdk-stage1/dietlibc/include/glob.h,
-	mdk-stage1/dietlibc/linuxnet.h, mdk-stage1/dietlibc/lib/__v_scanf.c,
-	mdk-stage1/dietlibc/include/sys/epoll.h,
-	mdk-stage1/dietlibc/lib/strcmp.c,
-	mdk-stage1/dietlibc/libpthread/pthread_mutex_destroy.c,
-	mdk-stage1/dietlibc/libdl/_dl_int.h,
-	mdk-stage1/dietlibc/include/sys/mount.h,
-	mdk-stage1/dietlibc/libstdio/fseeko.c,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_waitpid.c,
-	mdk-stage1/dietlibc/include/rpc/clnt.h,
-	mdk-stage1/dietlibc/lib/socket.c,
-	mdk-stage1/dietlibc/libugly/getnameinfo.c,
-	mdk-stage1/dietlibc/libpthread/pthread_attr_setdetachstate.c,
-	mdk-stage1/dietlibc/include/dietref.h, mdk-stage1/dietlibc/dietstdarg.h,
-	mdk-stage1/dietlibc/libugly/strftime.c,
-	mdk-stage1/dietlibc/i386/getsockname.S, mdk-stage1/dietlibc/i386/sin.S,
-	mdk-stage1/dietlibc/libcruft/getpass.c,
-	mdk-stage1/dietlibc/include/pty.h, mdk-stage1/dietlibc/lib/abort.c,
-	mdk-stage1/dietlibc/syscalls.s/stime.S,
-	mdk-stage1/dietlibc/lib/shutdown.c, mdk-stage1/dietlibc/i386/exp.S,
-	mdk-stage1/dietlibc/include/sys/soundcard.h,
-	mdk-stage1/dietlibc/include/sys/klog.h,
-	mdk-stage1/dietlibc/sparc/fork.S,
-	mdk-stage1/dietlibc/libpthread/pthread_setschedparam.c,
-	mdk-stage1/dietlibc/i386/sincos.S, mdk-stage1/dietlibc/lib/readdir.c,
-	mdk-stage1/dietlibc/lib/sbrk.c, mdk-stage1/dietlibc/syscalls.c/unlink.c,
-	mdk-stage1/dietlibc/include/sys/reboot.h,
-	mdk-stage1/dietlibc/i386/sqrtl.S, mdk-stage1/dietlibc/syscalls.c/time.c,
-	mdk-stage1/dietlibc/lib/vfprintf.c,
-	mdk-stage1/dietlibc/syscalls.c/getsid.c,
-	mdk-stage1/dietlibc/syscalls.c/chmod.c,
-	mdk-stage1/dietlibc/lib/msgctl.c,
-	mdk-stage1/dietlibc/syscalls.c/rmdir.c,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigaction.S,
-	mdk-stage1/dietlibc/i386/strcasecmp.S, mdk-stage1/dietlibc/i386/asinh.S,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c,
-	mdk-stage1/dietlibc/libcruft/gethostbyname2.c,
-	mdk-stage1/dietlibc/libstdio/tmpfile.c,
-	mdk-stage1/dietlibc/include/rpc/pmap_clnt.h,
-	mdk-stage1/dietlibc/syscalls.s/getresuid.S,
-	mdk-stage1/dietlibc/syscalls.s/n_sigprocmask.S, mdk-stage1/dietlibc/FAQ,
-	mdk-stage1/dietlibc/i386/ipow.S,
-	mdk-stage1/dietlibc/liblatin1/latin1-iscntrl.c,
-	mdk-stage1/dietlibc/libpthread/pthread_cond_init.c,
-	mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/putenv.c,
-	mdk-stage1/dietlibc/syscalls.s/init_module.S,
-	mdk-stage1/dietlibc/liblatin1/latin1-isupper.c,
-	mdk-stage1/dietlibc/syscalls.s/setgid32.S,
-	mdk-stage1/dietlibc/lib/__ftruncate64.c,
-	mdk-stage1/dietlibc/lib/islower.c, mdk-stage1/dietlibc/i386/atan.S,
-	mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/i386/__half.S,
-	mdk-stage1/dietlibc/include/sys/wait.h,
-	mdk-stage1/dietlibc/librpc/pmap_prot2.c,
-	mdk-stage1/dietlibc/librpc/pmap_clnt.c,
-	mdk-stage1/dietlibc/lib/isalnum.c, mdk-stage1/dietlibc/lib/speed.c,
-	mdk-stage1/dietlibc/libstdio/fseek.c, mdk-stage1/dietlibc/lib/memcpy.c,
-	mdk-stage1/dietlibc/syscalls.s/rt_sigprocmask.S,
-	mdk-stage1/dietlibc/librpc/getrpcent.c,
-	mdk-stage1/dietlibc/include/sysexits.h,
-	mdk-stage1/dietlibc/syscalls.c/setreuid.c,
-	mdk-stage1/dietlibc/lib/signal.c,
-	mdk-stage1/dietlibc/include/sys/arm-ioctl.h,
-	mdk-stage1/dietlibc/syscalls.s/llseek.S,
-	mdk-stage1/dietlibc/syscalls.s/_llseek.S,
-	mdk-stage1/dietlibc/syscalls.c/setregid.c,
-	mdk-stage1/dietlibc/include/setjmp.h, mdk-stage1/dietlibc/AUTHOR,
-	mdk-stage1/dietlibc/include/stddef.h,
-	mdk-stage1/dietlibc/libugly/getprotobynumber.c,
-	mdk-stage1/dietlibc/libdl/_dl_jump.S,
-	mdk-stage1/dietlibc/include/stdarg.h,
-	mdk-stage1/dietlibc/lib/getsockopt.c,
-	mdk-stage1/dietlibc/syscalls.c/umount.c, mdk-stage1/dietlibc/lib/atol.c,
-	mdk-stage1/dietlibc/syscalls.s/__pread.S,
-	mdk-stage1/dietlibc/lib/isspace.c, mdk-stage1/dietlibc/lib/abs.c,
-	mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/i386/log2.S,
-	mdk-stage1/dietlibc/libstdio/fgetc_unlocked.c,
-	mdk-stage1/dietlibc/include/net/route.h, mdk-stage1/dietlibc/parselib.h,
-	mdk-stage1/dietlibc/dietdns.h,
-	mdk-stage1/dietlibc/syscalls.s/n_sigaction.S,
-	mdk-stage1/dietlibc/lib/strxfrm.c,
-	mdk-stage1/dietlibc/include/rpc/auth.h,
-	mdk-stage1/dietlibc/lib/strtol.c, mdk-stage1/dietlibc/ppc/start.S,
-	mdk-stage1/dietlibc/libcruft/getpwnam_r.c,
-	mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/htonl.c,
-	mdk-stage1/dietlibc/include/sys/sem.h,
-	mdk-stage1/dietlibc/include/sys/i386-ioctl.h,
-	mdk-stage1/dietlibc/lib/if_nametoindex.c,
-	mdk-stage1/dietlibc/lib/shmget.c, mdk-stage1/dietlibc/i386/libm2.S,
-	mdk-stage1/dietlibc/include/rpc/auth_des.h,
-	mdk-stage1/dietlibc/include/inttypes.h, mdk-stage1/dietlibc/lib/atoi.c,
-	mdk-stage1/dietlibc/syscalls.c/lseek.c,
-	mdk-stage1/dietlibc/libcruft/getpwuid.c,
-	mdk-stage1/dietlibc/libugly/logging.c,
-	mdk-stage1/dietlibc/librpc/svc_tcp.c,
-	mdk-stage1/dietlibc/alpha/setjmp.S,
-	mdk-stage1/dietlibc/libpthread/pthread_create.c,
-	mdk-stage1/dietlibc/libcruft/dnscruft2.c,
-	mdk-stage1/dietlibc/libcruft/getpwent.c,
-	mdk-stage1/dietlibc/include/net/if_arp.h,
-	mdk-stage1/dietlibc/alpha/clone.S,
-	mdk-stage1/dietlibc/syscalls.s/environ.S,
-	mdk-stage1/dietlibc/libpthread/pthread_sys_logging.c,
-	mdk-stage1/dietlibc/COPYING,
-	mdk-stage1/dietlibc/libpthread/pthread_errno.c: Merge in CVS dietlibc
-	0.21 for IA-64 and X86-64 support. However, drop the
-	following architectures we currently don't support: arm, mips, mipsel,
-	parisc,
-	s390, sparc64.
-
-	* mdk-stage1/dietlibc/Makefile: dynlinker/ directory is obsolete and dead
-	here.
-	Fixes for unmerged parts (contrib, examples)
-	Merge in CVS dietlibc 0.21 for IA-64 and X86-64 support. However, drop
-	the
-	following architectures we currently don't support: arm, mips, mipsel,
-	parisc,
-	s390, sparc64.
-
-	* mdk-stage1/newt/form.c: #include <string.h> for memset()
-
-	* mdk-stage1/Makefile.common, mdk-stage1/Makefile: Use dietlibc on x86-64
-	  - Use minilibc on x86-64
-	  - mar requires bzlib to be built beforehand, especially if building
-	with
-	dietlibc
-	  - Nuke trickery to handle -DIET objects, everything is now built
-	through
-	  the diet driver, defined into $(DIET)
-
-	* mdk-stage1/dietlibc/include/sys/types.h,
-	mdk-stage1/dietlibc/include/rpc/types.h: Define u_char et al. from
-	<rpc/types.h>. The __dietlibc_u_char mechanism
-	is here to ensure we are not redefining types, if we were to compile
-	programs with -D_BSD_SOURCE (u_char et al. are defined in <sys/types.h>
-	int that case).
-	Merge in CVS dietlibc 0.21 for IA-64 and X86-64 support. However, drop
-	the
-	following architectures we currently don't support: arm, mips, mipsel,
-	parisc,
-	s390, sparc64.
-
-	* mdk-stage1/dns.c: dietlibc defined __dietlibc__ macro. Also add check
-	for __GLIBC__. If none
-	of those C library is used, simply abort compilation.
-
-2003/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: remove unneeded pablo's change on RTL
-
-	* ugtk2.pm: fix titi's perl checko
-	internalize prepare_gtk2 in the BEGIN {} of ugtk2 already containing the
-	Gtk2->init
-
-	* lang.pm: small change thx to pablo
-	reposition main and steps window when in RTL language
-	allow to specify font size in output of l2pango_font
-	destroy and recreate steps window when charset changed because gtk won't
-	update the font size otherwise
-
-	* install_gtk.pm: reposition main and steps window when in RTL language
-	allow to specify font size in output of l2pango_font
-	destroy and recreate steps window when charset changed because gtk won't
-	update the font size otherwise
-
-	* interactive/gtk.pm: internalize prepare_gtk2 in the BEGIN {} of ugtk2
-	already containing the Gtk2->init
-
-	* install_steps_gtk.pm: allow to specify font size in output of
-	l2pango_font
-	destroy and recreate steps window when charset changed because gtk won't
-	update the font size otherwise
-
-2003/02/18  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* help.pm: fixed small typo
-
-	* install_steps_interactive.pm: define language direction
-
-	* printer/printerdrake.pm: Removed N( ) around IP numbers, there is no
-	point in "translating" them
-
-	* steps.pm: changed "Choose your Language" -> "Language"
-	shortened some strings to help them fit in the steps window
-
-2003/02/18  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: /proc/partitions includes partition with type
-	"empty" and a non-null size
-	so add them for comparison
-	  - ensure someone can't set a mount point on a non formatted ntfs
-	partition
-	  - remove the mount point when destructive resizing and isNonMountable
-
-	* diskdrake/interactive.pm: fix ugly bug (the bug was introduced in
-	diskdrake/interactive.pm 1.67)
-	  - ensure someone can't set a mount point on a non formatted ntfs
-	partition
-	  - remove the mount point when destructive resizing and isNonMountable
-
-	* interactive/gtk.pm: in {complete} or {canceled}, ensure giving a bad
-	entry number to focus doesn't
-	break (and log that something wrong happened)
-
-	* interactive/newt.pm: simplify
-	fix tree in newt (now handles default selected entry, and disallow using
-	non-leaves)
-
-	* diskdrake/resize_ntfs.pm (resize): do a test resize before doing the
-	real one
-
-	* any.pm: don't use tmpfs on /tmp if /tmp is a separate partition
-	(anyway, all this is ugly, see with titi)
-
-	* install2.pm: simplify
-
-	* install_steps_interactive.pm (setRootPassword): display "Authentication"
-	in Advanced
-	display the release even when there is only one system to upgrade
-	(asked by flepied & warly)
-
-	* ugtk2.pm: the empty label in the HButtonBox had the same size as the
-	buttons (since
-	HButtonBox are always homogeneous), causing addUser in german not to fit
-	on
-	the screen. No good way to solve this :-(
-
-	* fsedit.pm: /proc/partitions includes partition with type "empty" and a
-	non-null size
-	so add them for comparison
-	better default partitioning
-
-	* keyboard.pm: translate grp_toggles at display-time, not compile-time
-
-	* Newt/Newt.xs: fix tree in newt (now handles default selected entry, and
-	disallow using non-leaves)
-
-	* tools/ddcprobe/ddcxinfos.c: catch bad HorizSync or VertRefresh
-	(on Regis's monitor, it gives "62-0 Hz VertRefresh")
-
-2003/02/18  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - "BrowsePoll" support in the CUPS configuration dialog.
-	  - Fixes on error message windows in the dialog for printer sharing
-	destinations.
-
-	* scanner.pm: Replaced "my" by "our" for the declaration of the
-	"ScannerDB" variable, so that /usr/bin/scannerdrake has access to it.
-
-2003/02/18  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* scanner.pm: perl_checker fixes
-
-	* network/network.pm: perl_checker fix
-
-	* drakxtools.spec: 9.1-1mdk
-
-	* Xconfig/card.pm: bump version on fredl request
-
-	* security/help.pm: resync with msec
-
-2003/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix bug occurring "if no sound card are
-	detected AND the user selected things
-	needing a sound card, propose a special case for ISA cards"
-	(thanks to guran)
-
-	* help.pm: some more fixes (thanks to Edward Cherlin and Reinout van
-	Schouwen)
-
-	* security/level.pm: replace %level_list with level_list() so that
-	N("...") is called at runtime
-	instead of compile-time
-
-	* network/drakfirewall.pm: translate server {name} at display-time, not
-	compile-time
-
-2003/02/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* fsedit.pm: given default size of / increased.
-	increased /var container for suggestion (simple or with /usr).
-
-	* commands.pm: fixed command insmod.
-
-	* install_steps_interactive.pm: add a reboot if not enough free space is
-	available for installation or upgrade.
-
-2003/02/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: fix translation of title: N() needs to be called
-	after
-	interactive->vnew has been called
-
-	* steps.pm: fix pixel's commit: never display choosePackages and
-	configureServices, instead of always
-
-	* lang.pm: change %countries so that we really have translated countries
-	(side effect of #1723 -> noticing this bug)
-	disable mn until we have lang-mn.png
-
-	* drakxtools.spec: gr�h
-
-	* standalone/drakpxe: fix translation of title by calling N() after
-	interactive->vnew
-
-2003/02/17  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/nl.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/hu.po: updated
-	Estonian file
-	updated pot file
-
-	* share/po/help-de.pot, share/po/help-it.pot, share/po/help-fr.pot,
-	share/po/help-es.pot: updated Estonian file
-
-	* lang.pm: updated @locales list
-
-2003/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix bug occurring "if no sound card are
-	detected AND the user selected things
-	needing a sound card, propose a special case for ISA cards"
-	(thanks to guran)
-	ensure $o->{raw_X} is not destroyed when there is no modification done
-	(since in that case
-	Xconfig::main::configure_everything_or_configure_chooser() returns
-	undef)
-
-	* any.pm: add a checkbox "Force ACPI"
-
-	* ugtk2.pm: fix pop_it...
-
-	* steps.pm: don't show "Choose packages to install" nor "Configure
-	services"
-	(was still there in expert)
-
-	* diskdrake/interactive.pm: remove debug code :-(
-
-	* security/level.pm: replace %level_list with level_list() so that
-	N("...") is called at runtime
-	instead of compile-time
-
-	* install_steps.pm: propagate /proc/cmdline acpi=xxx
-	have acpi=off by default
-
-	* rescue/list.x86_64, rescue/list.i386, rescue/list.ia64: replace
-	ext2resize with resize2fs in rescue (already done in DrakX)
-
-	* network/drakfirewall.pm: translate server {name} at display-time, not
-	compile-time
-
-	* help.pm: some more fixes (thanks to Edward Cherlin and Reinout van
-	Schouwen)
-	fix typos (thanks to Reinout van Schouwen)
-
-2003/02/17  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* security/help.pm: synced with msec
-
-	* harddrake/data.pm: bump version number
-
-2003/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk2.pm: fix pop_it...
-	hopefully final fix for pop_it
-
-	* interactive/gtk.pm: also ->hide in when a button is clicked in
-	standalone
-
-	* any.pm: add a checkbox "Force ACPI"
-
-	* install_steps_interactive.pm: ensure $o->{raw_X} is not destroyed when
-	there is no modification done
-	(since in that case
-	Xconfig::main::configure_everything_or_configure_chooser() returns
-	undef)
-
-	* install2.pm: don't security::various::config_security_user() can fail,
-	don't let it bother us
-
-	* install_steps.pm: propagate /proc/cmdline acpi=xxx
-	have acpi=off by default
-
-	* Xconfig/xfree3.pm (is_fbdev): fix typo
-
-	* Xconfig/xfree.pm (get_both): fix typo
-
-	* Xconfig/resolution_and_depth.pm (to_string): simpler way to handle the
-	"default" resolution of frame-buffer
-
-2003/02/17  Till Kamppeter  <till@mandrakesoft.com>
-
-	* drakxtools.spec: 9.1-0.34mdk
-
-	* printer/main.pm: 
-	  - Fixed bug of HP DeskJetb 990C being automatically installed even if
-	there is already a queue for it
-	  - Fixed checking whether a device is known to CUPS
-
-2003/02/17  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/da.po, share/po/ta.po, share/po/sv.po,
-	share/po/fi.po: updated Arabic, Dutch, Danish, Finnish, Swedish and
-	Tamil files
-
-	* standalone/harddrake2: correction for non-latin1 locales,
-	made strings "Unknown" and "unknown" translatable in device info
-
-	* share/po/ru.po: updated Russian and Arabic files
-
-	* share/po/ar.po: updated Russian and Arabic files
-	updated Arabic, Dutch, Danish, Finnish, Swedish and Tamil files
-
-	* lang.pm: synchrnoization of locale names with what we ship.
-	updated list of available kde langs
-
-2003/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: add module2description()
-
-	* diskdrake/hd_gtk.pm: fix help popping all the time
-
-	* ugtk2.pm: hopefully final fix for pop_it
-	fix setting pop_it for wizard in standalone
-
-	* interactive/gtk.pm: also ->hide in when a button is clicked in
-	standalone
-
-	* Xconfig/card.pm: use fbdev when the graphic card is unknown
-
-	* install_steps_gtk.pm: enhance summary layout
-
-	* install_steps_interactive.pm: better sound card description in summary
-
-	* install2.pm: don't security::various::config_security_user() can fail,
-	don't let it bother us
-
-	* Xconfig/monitor.pm: warn when auto conf fail
-
-	* Xconfig/xfree.pm (get_both): fix typo
-
-	* Xconfig/xfree3.pm (is_fbdev): fix typo
-
-	* Xconfig/resolution_and_depth.pm (to_string): simpler way to handle the
-	"default" resolution of frame-buffer
-
-2003/02/17  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm: 
-	  - Fixed bug of HP DeskJetb 990C being automatically installed even if
-	there is already a queue for it
-	  - Fixed checking whether a device is known to CUPS
-	  - Restructured function "main()"
-	  - Made automatic queue setup being done during installation
-	  - Support for unknown printers in auto-detection and in automatic
-	queue
-	  setup
-	  - Fixed determination of default printer
-	  - Fixed printer help page display
-	  - Fixed wait message in /usr/sbin/printerdrake
-
-	* printer/detect.pm, printer/data.pm, standalone/printerdrake,
-	printer/printerdrake.pm: 
-	  - Restructured function "main()"
-	  - Made automatic queue setup being done during installation
-	  - Support for unknown printers in auto-detection and in automatic
-	queue
-	setup
-	  - Fixed determination of default printer
-	  - Fixed printer help page display
-	  - Fixed wait message in /usr/sbin/printerdrake
-
-	* drakxtools.spec: 9.1-0.31mdk
-
-2003/02/17  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm, standalone/drakconnect: perl
-	generate undef indefinitely from the void
-
-	* standalone/logdrake: this was just tested before
-
-	* scanner.pm: 
-	  - (get_usb_ids_for_port, updateScannerDBfromSane) : simplify
-	  - perl_checker fixes
-
-	* drakxtools.spec: 9.1-0.33mdk
-	fix #1718
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/tg.po, share/po/bs.po, share/po/uz.po, share/po/ro.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, share/po/sq.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/cs.po, share/po/bg.po,
-	share/po/el.po, share/po/hu.po: simplify translator job by propaging
-	pixel english typo fix
-
-	* ugtk2.pm: in the old days, on cannot disable shrink1, resize2 or shrink2
-	since they always were true
-
-2003/02/17  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: 9.1 rc1
-
-2003/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: summary written in gtk, isn't it nice (?)
-
-	* install_steps_interactive.pm: handle "not configured" in summary_prompt
-
-2003/02/16  siegel
-
-	* share/po/de.po: updates
-
-2003/02/16  alus
-
-	* share/po/pl.po: updated
-
-2003/02/16  fabman
-
-	* share/po/es.po: updated
-
-2003/02/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* lang.pm: log a bit more
-
-	* install_steps_gtk.pm, install_gtk.pm: fix my breakage (broke non-latin1
-	installs :/)
-
-	* any.pm: clean $o->{locale}{langs}
-
-2003/02/16  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* keyboard.pm, lang.pm: Enabled Arabic keyboard,
-	added full list of countries listed in iso 3166,
-	changed japanese charset->font for KDE,
-	removed charset names no longer used
-
-2003/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: summary written in gtk, isn't it nice (?)
-	  - factorize "Help"-button handling
-	  - fix interactive_help_get_id (happily, it was no pb :)
-
-	* help.pm: fix typo (thanks to Christophe Combelles)
-
-	* install_steps_interactive.pm: handle "not configured" in summary_prompt
-
-	* services.pm: fix rawdevices description (bug #1677)
-
-	* diskdrake/hd_gtk.pm, interactive.pm, Xconfig/resolution_and_depth.pm,
-	install_interactive.pm: 
-	  - factorize "Help"-button handling
-	  - fix interactive_help_get_id (happily, it was no pb :)
-
-2003/02/15  alus
-
-	* share/po/pl.po: mostly updated
-	updated partially
-	why this file wasn't regenerated?
-
-2003/02/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk2.pm: don't mute the keyboard in ask_browse_tree_info (#1598)
-
-	* printer/printerdrake.pm: 
-	  - try to workaround #1581
-	  - fix the most code style-independant perl checker things
-
-2003/02/15  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian, Norwegian and Vietnamese files
-	updated po files
-
-	* share/po/vi.po: updated Estonian, Norwegian and Vietnamese files
-	updated pot files
-	updated po files
-
-	* share/po/id.po, share/po/gl.po, share/po/ja.po, share/po/hr.po,
-	share/po/mt.po, share/po/ga.po, share/po/ko.po, share/po/lt.po,
-	share/po/he.po, share/po/is.po, share/po/it.po, share/po/lv.po,
-	share/po/hu.po: updated pot files
-
-	* share/po/ar.po: updated remaining po files
-	updated po files
-
-	* share/po/pt_BR.po, share/po/br.po, share/po/be.po, share/po/uk.po,
-	share/po/fi.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/tg.po, share/po/bs.po, share/po/uz.po, share/po/wa.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/fr.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po: updated po files
-
-	* share/po/sk.po, share/po/ru.po, share/po/th.po, share/po/sl.po,
-	share/po/tr.po, share/po/sv.po, share/po/sr.po, share/po/sp.po,
-	share/po/ro.po, share/po/ta.po, share/po/sq.po, share/po/nl.po: updated
-	remaining po files
-
-	* share/po/no.po: updated Estonian, Norwegian and Vietnamese files
-	updated remaining po files
-
-2003/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: fix gc's typo
-
-2003/02/15  Till Kamppeter  <till@mandrakesoft.com>
-
-	* standalone/scannerdrake: Fixed bug in setting up multiple scanners at
-	once.
-
-2003/02/14  Till Kamppeter  <till@mandrakesoft.com>
-
-	* scanner.pm, standalone/scannerdrake: Improved manual scanner
-	configuration, bug fixes.
-
-	* standalone.pm: Updated "Usage:" message for Scannerdrake.
-
-2003/02/14  alus
-
-	* share/po/pl.po: fixed
-
-2003/02/14  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* drakxtools.spec: 0.30mdk
-
-	* standalone/drakperm: o Gtk2
-	o 'add a rule' works again
-	o 'edit rule' too
-	o get_rights get all rights, not just a few
-	o little cleanup (more to come)
-
-2003/02/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk2.pm: okcehc lrep (hebrew feeling)
-	wizard: free memory
-	add a frame to the wizard's outline
-	honour 9.1 theme title of windows: no icon, text to the left
-
-	* share/themes-galaxy.rc: adapt theme: grey for selection's background, no
-	inverse video on the selected text
-
-	* pixmaps/services.png, pixmaps/X.png, pixmaps/bootloader.png,
-	pixmaps/language.png, pixmaps/summary.png, pixmaps/security.png,
-	pixmaps/partition.png, pixmaps/keyboard.png, pixmaps/mouse.png,
-	pixmaps/rootpasswd.png, steps.pm, pixmaps/bootdisk.png,
-	pixmaps/harddrive.png, install2.pm, pixmaps/user.png, pixmaps/exit.png,
-	pixmaps/network.png: honour 9.1 theme title of windows: no icon, text to
-	the left
-
-	* install_gtk.pm: cleanup
-	fix default_theme always responding 'galaxy'
-	  - update steps window to 9.1 theme (blue/white bullets)
-	  - don't destroy steps window between each step => better looking
-
-	* install_steps_gtk.pm, pixmaps/steps_off.png, pixmaps/steps_on.png: 
-	  - update steps window to 9.1 theme (blue/white bullets)
-	  - don't destroy steps window between each step => better looking
-
-	* install_any.pm: install the locales-xx package for the selected country
-
-	* share/po/fr.po: fix misc
-
-2003/02/14  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/DrakX.pot: updated pot file
-
-2003/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/draksec: cleanup security::level, hopefully the **** draksec
-	still works
-
-	* security/level.pm: cleanup security::level, hopefully the **** draksec
-	still works
-	fix errors (due to previous commit)
-	create security::level::to_string()
-
-	* install_steps.pm: remove unneeded msec related actions (those are done
-	in msec)
-	simpler way to detect broken alternatives. It works for symlinks to
-	symlinks,
-	eg: rvi -> /bin/vi -> /etc/alternatives/vi -> /bin/vim-minimal
-	use $::prefix
-
-	* install_steps_interactive.pm: add "Security level" in summary
-	  - re-indent summary entries
-	  - add group for summary entries
-	(acceptLicense): do translate "Accept" and "Refuse"
-	  - add "Services" and "Firewall" in summary
-	  - rework a little summary & summary_prompt
-	use $::prefix
-	change order of entries in summary
-
-	* install_steps_gtk.pm: toggle Details / No details (as suggested by Prabu
-	Anand)
-
-	* interactive.pm: in ask_browse_tree_info, have Next instead of Ok,
-	Previous instead of Cancel when isWizard
-
-	* install_any.pm, install2.pm: create install_any::set_security() and use
-	it
-
-	* network/drakfirewall.pm: install package shorewall only when the user
-	wants a firewall
-
-	* services.pm: use $::prefix
-
-	* Makefile: themes/* is gone, no need to copy those files
-
-2003/02/14  Till Kamppeter  <till@mandrakesoft.com>
-
-	* scanner.pm, standalone/scannerdrake: Improved manual scanner
-	configuration, bug fixes.
-
-	* standalone.pm: Updated "Usage:" message for Scannerdrake.
-
-2003/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: when detected too little memory in ftp/http,
-	inform user that he/she may try an nfs install
-
-2003/02/13  alus
-
-	* share/po/pl.po: updated
-
-2003/02/13  fabman
-
-	* share/po/es.po: updated Spanish translation
-
-2003/02/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added tmdns zcip mandrake-galaxy galaxy-gnome
-
-2003/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/themes.rc, share/themes-mdk.rc, share/themes-galaxy.rc,
-	share/list, share/themes-mdk-Desktop.rc, install_gtk.pm,
-	share/themes-marble3d.rc, share/install.rc, install_steps_gtk.pm: 
-	  - use nice new gnome theme by ln and fcrozat
-	  - remove old no more used themes
-	  - for doc team, provide an option so that we'll
-	override some colors of the default theme
-	(for B&W printing screeshots)
-
-	* pixmaps/langs/lang-zh_CN.png, pixmaps/langs/lang-sl.png,
-	pixmaps/langs/lang-hy.png, pixmaps/langs/lang-de.png,
-	pixmaps/langs/lang-cy.png, pixmaps/langs/lang-it.png,
-	pixmaps/langs/lang-eu.png, pixmaps/langs/lang-ca.png,
-	pixmaps/langs/lang-sp.png, pixmaps/langs/lang-am.png,
-	pixmaps/langs/lang-nb.png, pixmaps/langs/lang-gd.png,
-	pixmaps/langs/lang-el.png, pixmaps/langs/lang-ia.png,
-	pixmaps/langs/lang-pt_BR.png, pixmaps/langs/lang-sv.png,
-	pixmaps/langs/lang-mi.png, pixmaps/langs/lang-bg.png,
-	pixmaps/langs/lang-fo.png, pixmaps/langs/lang-kw.png,
-	pixmaps/langs/lang-hu.png, pixmaps/langs/lang-ur.png,
-	pixmaps/langs/lang-iu.png, pixmaps/langs/lang-az.png,
-	pixmaps/langs/lang-mt.png, pixmaps/langs/lang-et.png,
-	pixmaps/langs/lang-wa.png, pixmaps/langs/lang-sq.png,
-	pixmaps/langs/lang-he.png, pixmaps/langs/lang-eo.png,
-	pixmaps/langs/lang-ta.png, pixmaps/langs/lang-ga.png,
-	pixmaps/langs/lang-sr.png, pixmaps/langs/lang-lt.png,
-	pixmaps/langs/lang-fa.png, pixmaps/langs/lang-oc.png,
-	pixmaps/langs/lang-ms.png, pixmaps/langs/lang-mk.png,
-	pixmaps/langs/lang-ar.png, pixmaps/langs/lang-lv.png,
-	pixmaps/langs/lang-zh_TW.png, pixmaps/langs/lang-is.png,
-	pixmaps/langs/lang-be.png, pixmaps/langs/lang-fr.png,
-	pixmaps/langs/lang-ro.png, pixmaps/langs/lang-hr.png,
-	pixmaps/langs/lang-en_GB.png, pixmaps/langs/lang-sk.png,
-	pixmaps/langs/lang-uk.png, pixmaps/langs/lang-br.png,
-	pixmaps/langs/lang-en_US.png, pixmaps/langs/lang-bs.png,
-	pixmaps/langs/lang-nl.png, pixmaps/langs/lang-af.png,
-	pixmaps/langs/lang-tr.png, pixmaps/langs/lang-gl.png,
-	pixmaps/langs/lang-pt.png, pixmaps/langs/lang-uz.png,
-	pixmaps/langs/lang-pl.png, pixmaps/langs/lang-id.png,
-	pixmaps/langs/lang-yi.png, pixmaps/langs/lang-fi.png,
-	pixmaps/langs/lang-ka.png, pixmaps/langs/lang-ru.png,
-	pixmaps/langs/lang-nn.png, pixmaps/langs/lang-gv.png,
-	pixmaps/langs/lang-th.png, pixmaps/langs/lang-cs.png,
-	pixmaps/langs/lang-ko.png, pixmaps/langs/lang-tg.png,
-	pixmaps/langs/lang-tt.png, pixmaps/langs/lang-da.png,
-	pixmaps/langs/lang-ja.png, pixmaps/langs/lang-vi.png,
-	pixmaps/langs/lang-es.png: invert video the images since the new theme
-	will be printing black text on white background
-
-	* install2.pm: 
-	  - add option 'theme' to allow specifying a theme
-	  - add option 'doc' to specify that we should override the default
-	theme with values well suited for printing screenshots on a B&W printer
-
-	* ugtk2.pm: remove shape of windows
-
-	* install_any.pm: die if getAndSaveFile failed, so that it will be easier
-	to debug
-	if we have this problem..
-
-	* install_steps_interactive.pm: don't allow going back from
-	accept_licenser to select_language, hence allow removing langs images
-	before downloading huge CJK fonts
-
-	* mdk-stage1/network.c: when detected too little memory in ftp/http,
-	inform user that he/she may try an nfs install
-
-	* lang.pm: don't allow going back from accept_licenser to select_language,
-	hence allow removing langs images before downloading huge CJK fonts
-	gc sux: install_any is not available in drakxtools
-
-2003/02/13  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/nl.po, share/po/et.po, share/po/fi.po: updated Arabic, Dutch,
-	Estonian and Finnish files
-
-	* share/po/ar.po: updated Arabic, Dutch, Estonian and Finnish files
-	updated Arabic file
-
-2003/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/help-de.pot, share/po/help-it.pot, share/po/help-fr.pot,
-	share/po/help-es.pot: minor changes (update from xml)
-	new help from xml
-
-	* network/network.pm, modules/interactive.pm, ugtk2.pm,
-	diskdrake/interactive.pm, services.pm, security/level.pm,
-	diskdrake/hd_gtk.pm, printer/printerdrake.pm: 
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-
-	* install_steps_gtk.pm: 
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-	  - {interactive_help} is a function returning text, it doesn't need to
-	do the help window
-	  - drop global interactive_help during install. Will be done per
-	->ask_*
-
-	* share/po/help_xml2pm.pl: no need for "empty" id anymore
-	  - adapt to new drakx-chapter.xml (esp. handle <variablelist> tags)
-	  - replace __ with N_
-	  - add "our" for "%steps"
-
-	* interactive.pm: fix ask_warn(), really dont make it pop
-	don't force pop_it on ask_warn's
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-	add ask_yesorno_, ask_okcancel_, ask_warn_, ask_from_listf_raw (to allow
-	help)
-
-	* network/modem.pm, network/isdn.pm, network/ethernet.pm, network/adsl.pm,
-	network/tools.pm: 
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-	add CVS $Id
-
-	* help.pm: minor changes (update from xml)
-	no need for "empty" id anymore
-	fix typo (from xml)
-	new help from xml
-
-	* interactive/gtk.pm: fix ask_warn(), really dont make it pop
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-	  - {interactive_help} is a function returning text, it doesn't need to
-	do the help window
-	  - drop global interactive_help during install. Will be done per
-	->ask_*
-
-	* standalone/fileshareset: cleanup
-
-	* Makefile: fix typo
-	use PerlIO-gzip
-
-	* c/Makefile: at last fix the culprit for the dreaded "relocation error"
-	(esp. occured when the glibc changed)
-
-	* harddrake/sound.pm: 
-	  - {interactive_help} is a function returning text, it doesn't need to
-	do the help window
-	  - drop global interactive_help during install. Will be done per
-	->ask_*
-
-	* Xconfig/card.pm, Xconfig/main.pm, Xconfig/resolution_and_depth.pm,
-	Xconfig/monitor.pm: fix and some more Help
-
-	* Xconfig/various.pm, install_interactive.pm, any.pm: fix and some more
-	Help
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-
-	* install_steps_interactive.pm: 
-	  - fix calling configureTimezone
-	  - have country before timezone (gc wants it that way...)
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-	don't use $_total, use $total_ instead
-
-	* standalone/drakboot, commands: make perl_checker happy
-
-	* standalone/drakupdate_fstab: help perl_checker
-
-	* share/list: use PerlIO-gzip
-
-	* network/netconnect.pm: 
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-	add cvs $Id
-
-	* install_steps.pm: have supermount back by default (at least when the
-	security level < 4)
-	  - set_help is deprecated
-	  - it is replaced by interactive_help_id on each ask_*
-	  - many set_help do not have any correspondance in help.pm (drakxid-*),
-	those are commented for now
-
-2003/02/13  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mouse.pm: Mouse button emulation. Clarify L-Command, add Enter. (Ben
-	Reser)
-
-2003/02/13  Till Kamppeter  <till@mandrakesoft.com>
-
-	* standalone/scannerdrake: Fixed typo.
-	Improved handling and structure of scanner database
-	  - Scanners with multiple ports are supported now
-	  - Fully automatic build of the scanner database, including lines for
-	configuration files
-	  - Fixed "SnapScan" <-> "snapscan" bug
-	  - Some HP scanners had no manufacturer field. Fixed.
-
-	* scanner.pm, handle_configs.pm: Improved handling and structure of
-	scanner database
-	  - Scanners with multiple ports are supported now
-	  - Fully automatic build of the scanner database, including lines for
-	configuration files
-	  - Fixed "SnapScan" <-> "snapscan" bug
-	  - Some HP scanners had no manufacturer field. Fixed.
-
-2003/02/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: 9.1-0.29mdk
-	9.1-0.28mdk
-
-	* services.pm (start_service_on_boot) prevent copying this style
-	(do_not_start_service_on_boot) : simplify it
-
-	* scanner.pm: no comment
-	fix drakxtools build
-
-2003/02/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix fpons sucks (at least one time).
-	configure profile in order to avoid standalone networking tools to
-	complain
-	about unconfigured device.
-
-	* standalone/drakpxe: updated to find an interface even when no profile
-	are available.
-
-	* pkgs.pm: prefer apache for drakpxe to find the right package.
-
-2003/02/12  gbeauchesne
-
-	* rescue/list, share/list: rpm files are not set to live in /usr/lib/rpm,
-	always.
-
-2003/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk2.pm: 
-	  - ensure focus should not be needed anymore
-	  - support XSetInputFocus hackery
-
-	* mdk-stage1/stdio-frontend.c: compile with -W
-
-	* lang.pm: clean
-	add missing pango rendering modules
-	in ramdisk, do download additional fonts if needed (fixes problems with
-	CJK languages and namely #1098)
-
-	* share/fonts.tar.bz2: CJK fonts can now be pcf.gz, hopefully since they
-	will be too large for ramdisks :(
-
-	* tools/make_mdkinst_stage2, share/list: add missing pango rendering
-	modules
-	in ramdisk, do download additional fonts if needed (fixes problems with
-	CJK languages and namely #1098)
-
-2003/02/12  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: Updated
-	pot file
-
-2003/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* harddrake/sound.pm: use {interactive_help}
-
-	* any.pm, install_steps_gtk.pm, diskdrake/interactive.pm, run_program.pm,
-	install_steps_auto_install.pm, install_steps_stdio.pm,
-	network/netconnect.pm, modules.pm, raid.pm, install_steps_newt.pm,
-	commands.pm, partition_table.pm: perl_checker compliance ("ref" now need
-	parentheses in many case)
-
-	* interactive.pm, interactive/gtk.pm: allow {interactive_help} per dialog
-	boxes instead of global
-	perl_checker compliance ("ref" now need parentheses in many case)
-
-	* install_steps.pm, install_steps_interactive.pm: rework summary() (esp.
-	to allow a gtk frontend)
-	perl_checker compliance ("ref" now need parentheses in many case)
-
-	* services.pm: cleanup starts_on_boot()
-
-	* install2.pm: rework summary() (esp. to allow a gtk frontend)
-
-	* ugtk2.pm: don't set pop_it when the window is hidden
-	perl_checker compliance ("ref" now need parentheses in many case)
-
-2003/02/12  Till Kamppeter  <till@mandrakesoft.com>
-
-	* scanner.pm, services.pm, standalone/scannerdrake: Scannerdrake vastly
-	improved
-	  - Use auto-detection methods of SANE
-	  - Do not ask the user to configure scanners which are already
-	configured
-	  - Handle systems with more than one scanner correctly
-	  - Added ports of newer scanners (libusb, parallel, ...) to the port
-	selector
-	in manual setup
-	  - Main dialog showing all configured scanners
-	  - Full support for scanner sharing via SANE (server/client)
-	  - Support for USB scanner access via libusb
-
-2003/02/12  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakpxe: fix just stupid fpons sucks
-
-	* drakxtools.spec: 9.1-0.27mdk
-
-	* standalone/drakconnect: 
-	  - clean up through ugtk2
-	  - enforce strict mode
-	  - give meaningful names to widget variables
-	  - fix embedding in mcc at last, aka going into expert mode does not
-	fsck up
-	the gui
-	  - display all configuration buttons (both internet and lan) the same
-	way
-	  - fix doble variable declaration to MDK::Common::Globals
-	  - fix non obvious "not a CODE reference" errors when embedded
-	  (fortunately, gc will fix perl-GTK2 if this syntax is still
-	authorized)
-	  - (configure_lan) : fix gtk+-2 port and remove old commented out
-	debugging code
-
-	* standalone/drakperm: perl_checker fixes
-
-	* standalone/draksec: do not enfore default settings
-
-2003/02/11  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Makefile.drakxtools: don't take lang subdir in pixmap
-
-2003/02/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_gtk.pm: format-a-la-tex the message telling that the
-	system is low on resources
-
-	* install_steps.pm: try to fix the $o->{lang} compat
-	have compatibility with old $o->{lang} for not breaking existing auto
-	install files
-
-	* install_any.pm: reflect lang->locale changes in saving auto_inst.cfg
-	file
-
-	* lang.pm: no need to duplicate LC_MONETARY
-	thx perl checko
-	have compatibility with old $o->{lang} for not breaking existing auto
-	install files
-
-	* Makefile.drakxtools: have localedrake in /usr/bin rather than /usr/sbin
-	(#1407)
-
-	* share/gen_locales.pl: update to changes in lang.pm
-
-2003/02/11  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: 
-	  - ensure log::l's don't appear on stderr
-	  - catch authentification errors
-
-	* keyboard.pm: for GRP_TOGGLE'd keyboard layouts, have "us,XX" instead of
-	simply "XX"
-	(to have previous XFree's behaviour)
-
-	* fsedit.pm, partition_table.pm: handle 0x7 partition table id specially
-	since it can be both hpfs or ntfs.
-	so adding 0x107 being really ntfs. hopefully this change won't break too
-	much things
-	(but things were already broken, since it assigned a mount point with
-	type ntfs to
-	some hpfs partitions) (fixes bug #1455)
-
-	* partition_table/raw.pm: add "OS/2 boot manager" (see bug #1338)
-
-	* share/diskdrake.rc: 
-	  - have the "Windows" button blue
-	  - set xthickness = 1 and ythickness = 1 for buttons
-	(so that non-colored buttons have the same feelings with the upcoming
-	new
-	  theme)
-
-	* Xconfig/card.pm: don't set AGPMode (see bug #707)
-
-2003/02/11  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* bootlook.pm: stop:
-	  - copying stude && useless trace around
-	  - reinventing the wheel: kill parse_etc_passwd() and use list_users()
-	instead
-
-	* standalone/harddrake2: no frame in standalone mode
-
-	* standalone/drakperm: smoother gui
-	  - further ugtk2 cleanups
-	  - (row_setting_dialog) : fix implosion
-	phase 1 of drakperm clean up through ugtk2
-	  - gtk2 port of dialogs (poulpy)
-	  - one callback cleanup (me):
-	o enforce strict mode (aka kill jonathanries) and introuce
-	    a permission data structure.
-	  o no need to keep global references on widget we pack through
-	    symbolic references; this is only namespace pollution
-
-2003/02/10  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - help link can be non local (http, www connnections).
-
-	* standalone/drakhelp: 
-	  - s/link/path/
-	  - http connections handled.
-
-2003/02/10  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* network/netconnect.pm: reworded network restart string
-
-	* network/ethernet.pm: added a text to describe the Zeroconf host name
-	field
-
-	* network/network.pm: corrected option handling and added hotplug checkbox
-
-2003/02/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: perl checko
-
-	* tools/make_mdkinst_stage2: count space needed for the filesystem so that
-	we don't end up with 3 mbytes of free space if /tmp was ext3
-
-	* interactive/gtk.pm: two fixes thx to perl_checker, one among them being
-	very important :)
-	when displaying images in treeview, unref pixbufs right after their use
-	so that we try to save some memory
-
-	* lang.pm: perl checko files
-
-2003/02/10  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ar.po: updated Arabic file
-
-2003/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: ck hptraid, but discard the insmod error for it
-	small cleanup
-
-	* bootloader.pm: in lilo.conf, "unsafe" is incompatible with "table=..."
-	(fixes bug #1382)
-
-	* fs.pm, diskdrake/interactive.pm, install_steps_interactive.pm: 
-	  - more precise message when formatting / fsck'ing / mounting
-	partitions
-	  - hide passwords (for smb)
-
-2003/02/10  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* network/netconnect.pm, network/network.pm, network/ethernet.pm:
-	perl_checker fixes
-
-	* ugtk2.pm: 
-	  - sort functions by name in export tags
-	  - (gtkset_name) introduce it for mcc and reuse it in
-	create_box_with_title()
-
-	* harddrake/sound.pm: cs4239 is managed by both "ad1848" and "snd-cs4236"
-
-2003/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_gtk.pm: do translate "System installation" and "System
-	configuration" in steps window
-
-2003/02/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: when probing that we're in testing mode, print out
-	the pid (since the probe is based on the pid and some recent machines
-	seem to interact badly with that when in bad acpi mood)
-
-	* mdk-stage1/Makefile: set version to 9.1
-
-	* pixmaps/langs/lang-zh_CN.png, pixmaps/langs/lang-sl.png,
-	pixmaps/langs/lang-hy.png, pixmaps/langs/lang-de.png,
-	pixmaps/langs/lang-cy.png, pixmaps/langs/lang-it.png,
-	pixmaps/langs/lang-eu.png, pixmaps/langs/lang-ca.png,
-	pixmaps/langs/lang-sp.png, install_steps_interactive.pm,
-	pixmaps/langs/lang-am.png, pixmaps/langs/lang-nb.png,
-	pixmaps/langs/lang-gd.png, install_steps_newt.pm,
-	pixmaps/langs/lang-el.png, pixmaps/langs/lang-ia.png,
-	pixmaps/langs/lang-pt_BR.png, pixmaps/langs/lang-sv.png,
-	pixmaps/langs/lang-mi.png, pixmaps/langs/lang-bg.png,
-	pixmaps/langs/lang-fo.png, pixmaps/langs/lang-kw.png,
-	pixmaps/langs/lang-hu.png, pixmaps/langs/lang-ur.png,
-	pixmaps/langs/lang-iu.png, install_steps_auto_install.pm,
-	pixmaps/langs/lang-az.png, standalone/drakhelp,
-	pixmaps/langs/lang-mt.png, pixmaps/langs/lang-et.png,
-	pixmaps/langs/lang-wa.png, pixmaps/langs/lang-sq.png,
-	pixmaps/langs/lang-he.png, pixmaps/langs/lang-eo.png,
-	pixmaps/langs/lang-ta.png, pixmaps/langs/lang-ga.png,
-	pixmaps/langs/lang-sr.png, pixmaps/langs/lang-lt.png,
-	pixmaps/langs/lang-fa.png, install_any.pm, pixmaps/langs/lang-oc.png,
-	standalone/drakxtv, pixmaps/langs/lang-ms.png,
-	pixmaps/langs/lang-mk.png, pixmaps/langs/lang-ar.png,
-	pixmaps/langs/lang-lv.png, pixmaps/langs/lang-zh_TW.png,
-	pixmaps/langs/lang-is.png, pixmaps/langs/lang-ro.png,
-	pixmaps/langs/lang-be.png, pixmaps/langs/lang-fr.png, install_steps.pm,
-	install_gtk.pm, pixmaps/langs/lang-hr.png, Makefile,
-	pixmaps/langs/lang-en_GB.png, pixmaps/langs/lang-sk.png,
-	install_steps_stdio.pm, pixmaps/langs/lang-uk.png,
-	pixmaps/langs/lang-br.png, pixmaps/langs/lang-en_US.png, lang.pm,
-	install2.pm, pixmaps/langs/lang-nl.png, pixmaps/langs/lang-bs.png,
-	pixmaps/langs/lang-af.png, pixmaps/langs/lang-tr.png,
-	pixmaps/langs/lang-pt.png, pixmaps/langs/lang-gl.png,
-	standalone/localedrake, pixmaps/langs/lang-uz.png, any.pm,
-	pixmaps/langs/lang-pl.png, pixmaps/langs/lang-id.png,
-	pixmaps/langs/lang-yi.png, pixmaps/langs/lang-fi.png,
-	pixmaps/langs/lang-ka.png, pixmaps/langs/lang-ru.png,
-	pixmaps/langs/lang-nn.png, pixmaps/langs/lang-gv.png,
-	pixmaps/langs/lang-th.png, pixmaps/langs/lang-cs.png,
-	pixmaps/langs/lang-ko.png, pixmaps/langs/lang-tg.png, keyboard.pm,
-	pixmaps/langs/lang-tt.png, pixmaps/langs/lang-da.png,
-	pixmaps/langs/lang-ja.png, pixmaps/langs/lang-vi.png,
-	pixmaps/langs/lang-es.png, timezone.pm: language/country selection
-	change:
-	  - first install step is selection of your language, in your language;
-	it uses images for that
-	  - language->country is probed, the selection of the country is
-	possible
-	  if there was a problem, in the Summary step
-	  - in the $o big structure, we now use $o->{locale} which contains
-	  three keys: lang, country and utf8
-	  - lang.pm has been cleaned and rewritten a bit
-	  - keyboard probing now done only on language (because this step is
-	  at the beginning of the install)
-	  - timezone probing done on country, if use changes country before
-	  timezone in the Summary, re-probe timezone accordingly
-
-	* rescue/tree/etc/issue: remove "cooker" from the issue of the rescue
-	since we're
-	aproaching the release candidates
-
-	* install_steps_gtk.pm: say we're low on resources if we have less than 70
-	Mb of RAM (was 60 Mb)
-
-	* tools/make_mdkinst_stage2: the shitload of images for selecting
-	languages in their languages needs a few additional inodes..
-
-	* install_messages.pm: change address for errata to reflect the future 9.1
-
-	* mdk-stage1/network.c: indent
-
-	* interactive.pm, interactive/gtk.pm: add option advanced_state: if set to
-	1, force the "Advanced" part of the dialog to be opened initially
-	add possibility to display images in tree-lists and bool-lists
-
-	* mdk-stage1/config-stage1.h: ramdisk is enlarging, move the limit from 52
-	Mb to 68 Mb (it won't work properly in gtk on a box with 64 Mb of
-	memory..)
-
-2003/02/07  alus
-
-	* share/po/pl.po: updated
-
-2003/02/07  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: 
-	  - DHCP & Zeroconf fixes for installation
-	  - fix '217.0.0.1 localhost' not written in /etc/hosts when using DHCP
-
-	* standalone/drakfont: 
-	  - full Gtk2
-	  - cleanup code (still much to do...)
-
-	* drakxtools.spec: new version
-
-2003/02/07  fabman
-
-	* share/po/es.po: updated Spanish translations
-
-2003/02/07  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/sp.po,
-	share/po/ca.po, share/po/da.po, share/po/tg.po, share/po/bs.po,
-	share/po/uz.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	pot file
-
-	* share/po/ar.po: updated Arabic file
-	updated pot file
-
-	* share/po/sv.po, share/po/cy.po: Updated Welsh and Swedish files
-	updated pot file
-
-	* printer/printerdrake.pm: Fixed English typo
-
-	* share/po/et.po: updated po file
-	updated pot file
-
-	* standalone/drakedm: fixed English typo
-
-2003/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/card.pm: fix english typo (bug #1350)
-
-2003/02/06  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakhelp: 
-	  - change package name to install
-
-2003/02/06  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* drakxtools.spec: new version
-
-	* network/network.pm: avoid to mess up tmdns.conf file
-	fix dhcp package installation
-	fix zeroconf suckiness
-
-2003/02/06  fabman
-
-	* share/po/es.po: updated translation
-
-2003/02/06  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/uz.po, share/po/de.po: Added start of Uzbek file; updated
-	German file
-
-2003/02/06  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive/gtk.pm: add "Help" button
-
-	* install_steps_interactive.pm (setRootPassword): have the focus on the
-	password field
-
-	* any.pm (ask_users): focus the "name" field, and change the buttons name
-	& place
-
-	* install_steps_gtk.pm: have the focus on the help "Ok" button
-	missing aewm-drakx causes pb when testing (perl going havoc?)
-	add "Help" button
-
-	* install_gtk.pm: remove create_big_help
-
-	* ugtk2.pm: drop "F1" for help (since a "Help" button is now available)
-	(create_okcancel): allow buttons on the left (for the "Help" button)
-
-	* interactive/newt.pm: fix sizing in the scrolled window in 80x25
-
-	* diskdrake/hd_gtk.pm: add "Help" button
-	(filesystems_button_box): in the caption write "Windows" instead of
-	"FAT"
-	(since NTFS uses the same color)
-
-2003/02/06  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/detect.pm: Corrected call for "tryWrite" function.
-
-2003/02/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakedm: sanitize
-	perl_checker fix (yeah, i was faster than perl_checko!)
-	the result of David Sansome|Laurent Montel|Frederic Lepied|Davod
-	Beidebs|Thierry Vignaud collision
-
-	* Makefile.config: add drakedm
-
-	* standalone/drakfloppy: fix floppy create :-)
-
-2003/02/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* network/adsl.pm: fixed small typo.
-	add support for adiusbadsl 1.0.2 (using adictrl -i to find interface and
-	using
-	pppoa).
-
-2003/02/04  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/tg.po, share/po/bs.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/sq.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file
-
-2003/02/04  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk2.pm: don't ->set_modal during install
-
-	* devices.pm: add "vcsa" (for brltty)
-
-	* Makefile: add brltty help file
-	wildcard * in share/list allowed to match multiple files, but not
-	multiple directories
-
-	* install2.pm: fix typo
-	add brltty help file
-	brltty support
-
-	* tools/make_mdkinst_stage2, install_steps.pm, install_any.pm: brltty
-	support
-
-	* share/list: add brltty help file
-	brltty support
-
-	* share/rpmsrate: add brltty
-	move packages from 3 to 4 (fix bug #1265)
-
-2003/02/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: Use system configs when wrapped in mcc.
-
-2003/02/04  Till Kamppeter  <till@mandrakesoft.com>
-
-	* handle_configs.pm: 
-	  - "Out-sourced" functions for config file handling into
-	handle_configs.pm,
-	it is used by both printerdrake and scannerdrake.
-	  - Improvements and fixes on CUPS daemon configuration by printerdrake.
-
-	* printer/printerdrake.pm: Fixed auto-detection of a configured (but not
-	started) network.
-	  - "Out-sourced" functions for config file handling into
-	handle_configs.pm,
-	it is used by both printerdrake and scannerdrake.
-	  - Improvements and fixes on CUPS daemon configuration by printerdrake.
-
-	* printer/main.pm: Removed debug helper line.
-	  - "Out-sourced" functions for config file handling into
-	handle_configs.pm,
-	it is used by both printerdrake and scannerdrake.
-	  - Improvements and fixes on CUPS daemon configuration by printerdrake.
-
-2003/02/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/draksec: 
-	  - fix get_check_default() and get_function_default() description
-	  - fix "check states were not saved if their value did not change (thus
-	reverting it to default on disk)"
-	  - fix emebedding (no transcience when embedded)
-	  - fix "value get chop()-ed until it disapear and is reset to default"
-	  - log which security level is set and not only the switch
-	killing latest remanent parts of christian "yeah baby, i'm piggy"
-	work:
-	
-	  - functions and checks listing :
-	  o rename get_functions() as list_functions() and
-	    get_default_checks() as list_checks();   this is both
-	    more homogenous and enable one to separate them from the
-	    get_(check|function)_(value|default) function group
-	  o regroup them
-	  o over simplify list_functions(): leave functions listing to msec
-	    (aka /usr/share/msec/level.<LEVEL>, assuming share/msec.py is
-	    always up to date, just don't care reparsing python code (this is
-	    plain stupid);  if we cannot rely on msec, on who could we :-) ?
-	  o this allow to simplify msec gui so that we do not exclude stuff
-	    already excluded
-	  - remove config_check(), config_funtion(): replace them by:
-	  o set_check() and set_function() to store new values in data
-	    structure
-	  o apply_checks() and apply_functions() to save these new values,
-	    thus writing config files once and not twice the functions &
-	    checks count
-	now, we always have a help entry and a default value but when fredl
-	rename a
-	check and forgot to remove it from /var/lib/msec/security.conf like
-	CHECK_SUID_GROUP => CHECK_SGID, but hopefully, he'll fix msec
-
-	* share/theme-editor.pl: update theme editor to current libDrakX api
-
-	* drakxtools.spec: 9.1-0.22mdk
-
-	* security/msec.pm: perl_checker fix
-	  - fix get_check_default() and get_function_default() description
-	  - fix "check states were not saved if their value did not change (thus
-	reverting it to default on disk)"
-	  - fix emebedding (no transcience when embedded)
-	  - fix "value get chop()-ed until it disapear and is reset to default"
-	  - log which security level is set and not only the switch
-	killing latest remanent parts of christian "yeah baby, i'm piggy"
-	work:
-	
-	  - functions and checks listing :
-	  o rename get_functions() as list_functions() and
-	    get_default_checks() as list_checks();   this is both
-	    more homogenous and enable one to separate them from the
-	    get_(check|function)_(value|default) function group
-	  o regroup them
-	  o over simplify list_functions(): leave functions listing to msec
-	    (aka /usr/share/msec/level.<LEVEL>, assuming share/msec.py is
-	    always up to date, just don't care reparsing python code (this is
-	    plain stupid);  if we cannot rely on msec, on who could we :-) ?
-	  o this allow to simplify msec gui so that we do not exclude stuff
-	    already excluded
-	  - remove config_check(), config_funtion(): replace them by:
-	  o set_check() and set_function() to store new values in data
-	    structure
-	  o apply_checks() and apply_functions() to save these new values,
-	    thus writing config files once and not twice the functions &
-	    checks count
-
-	* standalone/harddrake2: adapt to new mandrake_doc-drakxtools-* packages
-
-2003/02/03  alus
-
-	* share/po/pl.po: Not too many entries in beta release?
-
-2003/02/03  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: dhcp/zeroconf stuff
-
-2003/02/03  florin
-
-	* network/netconnect.pm: fix some drakgw behaviour
-
-2003/02/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: integrated chmouel fixes.
-
-2003/02/03  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/tg.po, share/po/bs.po, share/po/ro.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, share/po/sq.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/lv.po, share/po/hu.po: updated pot file
-
-	* share/po/ar.po: updated Arabic file
-	updated pot file
-
-2003/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pl, install_any.pm: do not eject cdrom when already removed
-	at the end of install (bug #1235)
-
-	* modules/parameters.pm: use run_program::get_stdout
-
-	* standalone/icons/smbnfs_mounted.png,
-	standalone/icons/smbnfs_default.png,
-	standalone/icons/smbnfs_has_mntpoint.png: have the background fully
-	transparent
-
-	* pkgs.pm: prefer mdkkdm over kdebase-kdm
-
-	* diskdrake/interactive.pm: make perl_checker happy
-
-	* diskdrake/smbnfs_gtk.pm: cleanup
-	port to Gtk2
-
-	* install_steps_gtk.pm: fix test mode install when Xnest is not there
-
-	* standalone/diskdrake: don't "use diskdrake::interactive", only require
-	it when needed
-
-	* Xconfig/test.pm: ensure the X test strings are translated
-
-	* interactive/newt.pm: fix typo (for treelist)
-
-	* standalone/keyboarddrake: make perl_checker happy
-	translate keyboard names
-
-	* install_steps.pm: remove yelp-pregenerate
-
-2003/02/03  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/draksec: 
-	  - msec was altered to produce help suitable for formatAlaTeX()
-	  - use formatAlaTeX() to have nicer tooltips
-
-	* docs/porting-ugtk: new obsolete func (thanks drakcronat)
-
-	* share/po/fr.po: typo fix
-
-	* security/msec.pm: 
-	  - consolidate file names
-	  - remove unused variables
-	  - rename get_(default|value as load_(default|value)s and alter them so
-	that config file are read only one time instead of one per option;
-	  data is stocked in package variable
-	  - thus get_default_checks() is quite a lot faster
-	  - alter get_(check|function)_(value|default) to use new data structure
-	  - fix check default reading
-	  - group default values reading and current values reading
-	what's left: do the same thing for writing tomorow
-
-	* security/help.pm: 
-	  - msec was altered to produce help suitable for formatAlaTeX()
-	  - use formatAlaTeX() to have nicer tooltips
-	auto-generated from msec/share/draksec_help.py libmsec and moved from
-	msec to here so that draksec help'll get translated
-	all changes must be done in soft/msec/share/libmsec.py !!!
-
-	* drakxtools.spec: 9.1-0.21mdk (to be continued by pouly)
-
-	* share/po/Makefile: remove drakpxe exception since fpons has at lease
-	fixed "fpons sucks"
-	in drakpxe
-
-2003/02/03  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm, network/ethernet.pm: 
-	  - fix zeroconf support
-	  - cleanups
-
-2003/02/03  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/cy.po: updated Welsh file
-
-2003/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* modules/parameters.pm: use run_program::get_stdout
-
-2003/02/03  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/draksec: sanitize gui (aka make it look nicer):
-	  - put the same help label on top of each msec options notebook pages
-	and consolidate it
-	  - use gtkpack_ instead of gtkpack so that we can tell gtk+ that label
-	  must neither fill nor expand, only the packtable should
-	display again the first notebook page
-	if no default value, then do not print one (aka for cron checks)
-	fix help system description.
-	we should really use the camille/deush help system though.
-	  - perl_checker fixes
-	  - display sorted options (hey pixel, note that the last diff trunk
-	with
-	  execessive () was not detected by perl_checker :-( )
-
-	* modules/parameters.pm: pixelize(tm)
-
-	* standalone/interactive_http/authorised_progs: draksec is not written to
-	use interactive, thus cannot be used by http
-	frontend
-
-	* standalone/interactive_http/miniserv.init: sanitize draxktools server
-	service script:
-	  - no gratuitous shell forking
-	  - now can be debugged through "sh -x"
-	  - use std shell service lib
-	  - make it print [OK] || [FAILLED]
-
-	* ugtk2.pm: let simplify
-
-2003/02/02  alus
-
-	* share/po/pl.po: updated
-
-2003/02/02  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ar.po: updated Arabic, Spanish, Finnish and Slovak files
-	updated Arabic and Danish files
-
-	* share/po/es.po, share/po/sk.po, share/po/fi.po: updated Arabic, Spanish,
-	Finnish and Slovak files
-
-	* share/po/da.po: updated Arabic and Danish files
-
-2003/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* printer/printerdrake.pm: move whatPrinter(), whatUsbport() and
-	whatPrinterPort() out of detect_devices to printer::detect
-	(it cleans up detect_devices, and won't hurt eyes anymore :)
-	this change, together with .perl_checker skipping printer::* marks the
-	style disagreement
-	    between printer/* and the rest of install
-
-	* lang.pm, common.pm, install_interactive.pm: please perl_checker
-
-	* printer/detect.pm, detect_devices.pm: move whatParport() to
-	printer::detect
-	move whatPrinter(), whatUsbport() and whatPrinterPort() out of
-	detect_devices to printer::detect
-	(it cleans up detect_devices, and won't hurt eyes anymore :)
-	this change, together with .perl_checker skipping printer::* marks the
-	style disagreement
-	    between printer/* and the rest of install
-
-	* bootloader.pm: fix grub installed on {first_hd_device} instead of {boot}
-	(bug #1199)
-
-	* share/diskdrake.rc: NTFS is blue
-
-	* partition_table.pm (adjust_local_extended): fix resizing local extended
-
-	* install_gtk.pm, ugtk2.pm: ensure the window is big enough in 640x480:
-	remove logo and steps window
-
-	* .perl_checker: do not check printer::main, printer::printerdrake and
-	printer::detect, too many warnings
-
-	* install_steps_gtk.pm: 
-	  - handle {vga16} in Xnest testing mode
-	  - fix weird bug due to missing aewm-drakx in test mode (??)
-	  - add Xnest feature when testing
-	  - cleanup and re-indent
-
-2003/02/02  siegel
-
-	* share/po/de.po: some updates
-
-2003/02/02  Till Kamppeter  <till@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: Fixed Foomatic
-	installation done by installer.
-
-2003/02/01  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: updated Vietnamese, Estonian and Albanian files
-	updated Vietnamese file
-
-	* share/po/et.po, share/po/sq.po: updated Vietnamese, Estonian and
-	Albanian files
-
-2003/02/01  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/data.pm, printer/printerdrake.pm: 
-	  - Completed support for pre-compiled Foomatic PPDs.
-	 - Cleaning of mamufacturer names for menues and for comparing
-	auto-dtected
-	   data against Foomatic centralized in one function.
-	 - Fixed file name in check for installed packages.
-	 - Fixed display of boolean options from native PostScript PPD files in
-	the
-	   option setting dialog.
-
-	* printer/main.pm: 
-	  - Improved generation of printer list entries from
-	manufacturer-supplied PostScript PPDs.
-	  - Completed support for pre-compiled Foomatic PPDs.
-	 - Cleaning of mamufacturer names for menues and for comparing
-	auto-dtected
-	   data against Foomatic centralized in one function.
-	 - Fixed file name in check for installed packages.
-	 - Fixed display of boolean options from native PostScript PPD files in
-	the
-	   option setting dialog.
-
-2003/01/31  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* install_steps_interactive.pm: be sure $o->{netcnx}{type} is set when
-	using easy_dhcp
-
-	* mdk-stage1/network.c: don't save hostname if intf->boot_proto ==
-	BOOTPROTO_DHCP
-
-	* network/ethernet.pm: zeroconf
-
-	* drakxtools.spec: new version
-
-	* ugtk2.pm: avoid poping
-
-	* network/network.pm: more zeroconf configuration
-
-2003/01/31  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/he.po, share/po/sp.po, share/po/cy.po, share/po/da.po,
-	share/po/ar.po, share/po/tg.po, share/po/bs.po, share/po/ro.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po,
-	share/po/ta.po, share/po/fr.po, share/po/sq.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/lv.po, share/po/hu.po: updated pot file
-
-	* share/po/ca.po: updated pot file
-	Fixed small error (missing "/" in menu entry)
-
-	* standalone/drakbackup: fixed typo (drakbakup.conf -> drakbackup.conf)
-
-2003/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix poulpy
-
-2003/01/31  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* install_steps_interactive.pm: be sure $o->{netcnx}{type} is set when
-	using easy_dhcp
-
-	* mdk-stage1/network.c: don't save hostname if intf->boot_proto ==
-	BOOTPROTO_DHCP
-
-	* ugtk2.pm: avoid poping
-
-2003/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/resize_ntfs.pm: create diskdrake::resize_ntfs to factorize
-	code
-
-	* install_gtk.pm (createXconf): special case for "none" mouse device
-	graphical layout change
-
-	* install_steps_gtk.pm: handle pop_it more nicely: no need to precise
-	pop_it when the wizard window already has a window,
-	that way, two dialog boxes won't merge in the same window (which is
-	dumb!)
-	remove explicitly setting the size of advertising window
-	(it wasn't setting the same size as the wizard mode size)
-
-	* install_any.pm: fix typo
-
-	* diskdrake/interactive.pm: 
-	  - do not write_partitions when resizing & loosing data (not needed)
-	  - handle "cancel" on write_partitions
-	fix typo (calling resize_fat::main instead of diskdrake::resize_ntfs)
-	create diskdrake::resize_ntfs to factorize code
-
-	* install_interactive.pm: fix "one big ntfs" resizing (in the limit case)
-	small fixes
-	add ntfs resize to the wizard
-
-	* interactive/gtk.pm, diskdrake/hd_gtk.pm, ugtk2.pm: handle pop_it more
-	nicely: no need to precise pop_it when the wizard window already has a
-	window,
-	that way, two dialog boxes won't merge in the same window (which is
-	dumb!)
-
-	* mouse.pm (detect): cleanup the value returned when only a wacom is found
-
-	* install_steps_interactive.pm: fix poulpy
-
-	* install_steps.pm: do "yelp-pregenerate -a" only once
-
-2003/01/31  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - Faster switch between normal and expert mode (no re-read of the
-	print
-	queues).
-	  - Prepared for working with pre-compiled Foomatic PPDs.
-
-2003/01/31  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: beta 3 logo
-
-2003/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm, diskdrake/resize_ntfs.pm: create
-	diskdrake::resize_ntfs to factorize code
-
-	* install_interactive.pm: add ntfs resize to the wizard
-
-	* install_any.pm: fix typo
-
-	* install_gtk.pm: graphical layout change
-
-2003/01/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixed progress bar
-	too small.
-	new image for floppy for 9.1
-
-	* share/list: added pango-hebrew-xft.so for hebrew to be displayed
-	(chmouel)
-
-2003/01/30  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/tg.po: Added Tajiki file
-
-	* share/po/cy.po: converted Welsh file to UTF-8
-
-	* share/po/nl.po: updated Dutch file
-
-2003/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: drop $o->{lnx4win} handling
-	add isFat_or_NTFS() and use it where possible instead of isFat() since
-	Windows
-	is now using ntfs, not only Windows NT
-
-	* install2.pm: drop $o->{lnx4win} handling
-
-	* mdk-stage1/Makefile: remove other.img & usb.img, add hd_usb.img &
-	network_gigabit_usb.img
-
-	* Xconfig/xfree.pm (merge_values): allow get_monitors to work when xfree3
-	is missing
-
-	* interactive.pm (helper_separator_tree_to_tree): this new function helps
-	transforming a
-	flag {list} to a tree, using {separator}
-
-	* interactive/newt.pm: perl_checker small fixes
-	basic treelist handling (it leaks memory, but who cares, compared to gtk
-	:)
-
-	* any.pm, bootloader.pm, install_steps_interactive.pm,
-	diskdrake/hd_gtk.pm, fsedit.pm, install_any.pm, partition_table.pm: add
-	isFat_or_NTFS() and use it where possible instead of isFat() since
-	Windows
-	is now using ntfs, not only Windows NT
-
-	* network/network.pm, network/ethernet.pm, install_steps_auto_install.pm,
-	network/netconnect.pm, modules.pm: adapt to new category network/gigabit
-	(which used to be in network/main)
-
-	* Newt/Newt.xs: basic treelist handling (it leaks memory, but who cares,
-	compared to gtk :)
-
-2003/01/30  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - Conservation of option settings also for queues with PostScript PPD
-	files
-	or when switching between PostScript PPD file and Foomatic.
-	  - Fixed tree structure of main window in expert mode.
-	  - Several smaller bug fixes.
-	  - Display options devided in the groups defined in the PPD file.
-	  - For Foomatic PPDs the options in the "General" group are shown by
-	default
-	  the rest when clicking "Advanced". When there ar no groups, the
-	decision
-	  is done by a table of most commonly used option names.
-	  - Sort the displayed options of a queue with a non-Foomatic PPD file
-	by the
-	  importance of the options.
-	  - Do not sort the values of an option, they are already conveniently
-	sorted
-	  in the PPD files.
-	  - Removed some unnecessary re-reads of the printer option information.
-	  - Several fixes to run smoothly with Foomatic 2.9.x.
-
-	* printer/data.pm: 
-	  - Conservation of option settings also for queues with PostScript PPD
-	files
-	or when switching between PostScript PPD file and Foomatic.
-	  - Fixed tree structure of main window in expert mode.
-	  - Several smaller bug fixes.
-
-2003/01/30  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/harddrake2: translate topics (aka hw class names) in
-	harddrake gui
-
-	* drakxtools.spec: 9.1-0.19mdk
-
-	* harddrake/data.pm: translate topics (aka hw class names) in harddrake
-	gui
-	  - cosmetic fix for "drakconnect does not detect nvnet part of nvforce2
-	chips"
-	hint: their class is MEMORY_RAM :-( ...
-	  - btw, simplify unknown devices detection (merging tests regarding
-	driver and
-	  media type)
-	  - move nforce system controllers in bridge class (which is renamed
-	"bridges and
-	  system controllers" aka where we put stuff we've nothing to configure
-	but we
-	  don't want to put them in controller so that users are not afraid) but
-	nvnet
-
-	* standalone/logdrake: on second thoughts, this is just simpler
-	  - perl_checker fixes
-	  - fix non embedded case :-(
-
-2003/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (helper_separator_tree_to_tree): this new function helps
-	transforming a
-	flag {list} to a tree, using {separator}
-
-	* Newt/Newt.xs, interactive/newt.pm: basic treelist handling (it leaks
-	memory, but who cares, compared to gtk :)
-
-2003/01/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/drakpxe: fixed perl_checker
-
-	* network/netconnect.pm: fixed some perl_checker
-
-2003/01/29  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/pt.po: updated Portuguese and Danish files
-
-	* keyboard.pm, lang.pm: switched some languages to UTF-8 (they use ascii
-	only, so it shouldn't
-	be noticed); changed a keyboard name to match name used by XFree86
-
-2003/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: ntfsresize feature added (not tested!)
-
-	* detect_devices.pm, raid.pm: software raid (mdX) can go up to md31
-
-	* diskdrake/hd_gtk.pm: don't set $::main_window during install
-
-	* diskdrake/interactive.pm: fix various resize pbs:
-	  - write partition table *before* resizing when partition is enlarged
-	  - debug ntfsresize
-	dumpe2fs call cleanup
-	ntfsresize feature added (not tested!)
-
-	* fsedit.pm: handle mdX where X >= 10 (it should fix bug #1129)
-
-2003/01/29  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - Automatic non-interactive installation of local print queues.
-	  - Standard and advanced options selected by option groups in PPD.
-	  - Fixed bug of "CUPS + GIMP-Print" drivers being preferred against
-	"Foomatic + gimp-print" drivers in beginners mode.
-	  - Foomatic package installation adapted to Foomatic 2.9.x.
-
-2003/01/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/logdrake: logdrake is a special case as for embedding in mcc
-	since it can be embedded
-	twice: one as explanation viewer and one a log search tool.
-	so we must handly ask mcc to display us ...
-
-	* detect_devices.pm (getIDE) don't provide information when we don't have
-	it (vendor, description)
-	(getModem) it always return an empy hash, thus confusing harddrake
-
-	* harddrake/data.pm: fix doble detection of pci modems
-	restore cd/dvd burners detection
-
-	* standalone/harddrake2: print badly managed devices' drivers in red
-
-2003/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive/gtk.pm: fixes unresponsive keyboard
-
-2003/01/28  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po, share/po/DrakX.pot: updated Portuguese file
-
-	* share/po/fi.po, share/po/he.po: updated Finnish and Hebrew files
-
-2003/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* Newt/Newt.xs, interactive/newt.pm: cleanup use of flags
-	simplify API (always -1,-1 for left,top when creating widget, it means
-	auto-placement)
-
-	* any.pm: log configured dvds for better post-debugging
-
-	* diskdrake/interactive.pm: for resize2fs, don't multiply by 512 *then*
-	divide by $block_size, better
-	divide by ($block_size / 512)
-
-2003/01/28  Till Kamppeter  <till@mandrakesoft.com>
-
-	* share/rpmsrate: Take into account the new splitting of the Foomatic
-	packages.
-
-	* printer/main.pm, printer/printerdrake.pm: More stuff for non-interactive
-	printer configuration:
-	  - Added find_new_printer() function to find local printers which are
-	not
-	configured yet
-	  - Fixed Titi's bugs which messed up list of auto-detected printers
-	  - Corrected text in the dialog for changing the printer connection
-	type
-	  (for local printer connections).
-	  - Allow switching to expert mode during installation (the installation
-	has
-	  no global expert mode any more.
-
-2003/01/28  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone.pm: s/version name/version number/ (Christophe Combelles)
-	typo fix in logdrake usage help (spoted by Christophe Combelles)
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/he.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/nl.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po,
-	share/po/cs.po, share/po/bg.po, share/po/el.po, share/po/hu.po: typo fix
-	in logdrake usage help (spoted by Christophe Combelles)
-
-	* interactive.pm, ugtk2.pm, ugtk.pm, interactive/gtk.pm, common.pm:
-	cleaning the utf8 support stuff:
-	  - consolidate check_for_xserver() to check for x11 access
-	  - introduce prepare_gtk2() to do what gtk+2 needs, so that
-	  tools that're not part of drakxtools (aka: rpmdrake, mcc, ...) can
-	just do :
-	
-	  unshift @::textdomains, 'drakconf';  prepare_gtk2();
-
-	* harddrake/TODO: update
-
-	* drakxtools.spec: 9.1-0.17mdk
-
-2003/01/27  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* standalone/drakfont: 
-	  - progress bars works
-	  - change sucky About box
-	  - wipeout commented code
-	  - remove ugly borders when embedded
-
-2003/01/27  florin
-
-	* standalone/drakgw: typo rename, not renamef
-
-2003/01/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mouse.pm: fix missing pointer_ungrab so that after testing mouse during
-	install we can move the mouse pointer everywhere
-
-	* interactive/gtk.pm: since return values of callbacks are now
-	non-ignored, we need to
-	return 0 to the expose_event when displaying wait message so that
-	gdk really does the exposure :)
-
-2003/01/27  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: updated po file
-
-2003/01/27  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive/newt.pm: don't blindly truncate strings to size 40 in
-	simplify_string
-
-2003/01/27  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: Adapted printerdrake to
-	Foomatic 2.9.x, bug fix for use of native PPDs in recommended mode, bug
-	fixes in association between detected printers and existing queues.
-
-2003/01/27  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* modules.pm: fix latest source of "unlisted modules" in draksound:
-	modules::get_alias() was able to give "module " instead of only "module"
-	beacause modules::read_conf() split the line on space with a maximum of
-	3
-	splited elements.
-	i choose to strip terminal spaces and btw terminal comments.
-	i did not choose to do not put a limit to split since it's usefull for
-	some
-	cases.
-
-	* standalone/drakbug: force drakbug to be runnable in strict mode
-
-	* drakxtools.spec: 9.1-0.16mdk
-	9.1-0.15mdk
-	reput back perl-gtk-0.7 dependancy because of drakfloppy and
-	net_monitor
-
-	* standalone/drakxtv: this patch enable doc team to take snapshot of
-	drakxtv even if they do not
-	have any card:
-	  - running "/usr/sbin/drakxtv" will enable to take snapshot of error
-	message
-	when xawtv wasn't installed by the drakx installer
-	  - running "/usr/sbin/drakxtv --testing" will emulate a fake dummy tv
-	card
-	  so that one is able to take snapshots of configuring a tv card
-
-	* Makefile: roll back (mcc!=gi)
-	remove warnings in package
-
-	* standalone/draksec: it's useless to import %security::help::help since
-	it's already
-	exported by our
-
-	* ugtk2.pm: remove debugging statement
-	let mcc pack tables behave smoother, so that all columns of mcc tables
-	behave
-	like last column of drakx's pack tables
-	don't sent USR2 to mcc for logdrake;
-	logdrake is handled differently since it's a special case.
-	else on first execution of an embedded app, we take two USR2 (one from
-	the
-	embedded app and one from logdrake, which is bad)
-
-	* standalone/drakfloppy, interactive.pm, standalone/net_monitor: strip
-	authentification out of interactive->vnew into common.pm
-	This enable apps that still use gtk+-1.2 via my_gtk to still work when
-	they only need interactive->vnew('su') just to get root capabilities.
-	Indeed, interactive load ugtk if it has access to the X server, which
-	make my_gtk and ugtk fight for the cpu forever... which is bad imho...
-	drakfloppy and net_monitor were converted to use it and are now usuable
-	again
-	("i leave ...  again" commit).
-	
-	it would also enable to complete spec 64 by enabling rpmdrake
-	to use kdesu under kde and consolehelper under gnome.
-	rpmdrake is indeed the last program to not behave like
-	the running desktop to get root capability.
-	
-	unless someone is against this, i'll convert the mcc and all other gtk+
-	pure
-	tools to do not use anymore interactive just to get root capability.
-	
-	
-	btw, i fixed the infamous SECTOR_SIZE warning...
-
-	* diskdrake/hd_gtk.pm, interactive/gtk.pm: diskdrake: when non embedded,
-	ensure sub window are modal
-	all other drakx tool can be fixed the same way
-
-	* share/po/Makefile: since fpons don't care about fixing drakxtools build
-	broken by
-	drakpxe, let remove drakpxe from translatable files
-
-	* standalone/logdrake: cosmetic fix for embedded mode:
-	don't display "wait while parsing" window when embedded
-	fix logdrake behaviour in mcc where logdrake would only log
-	the first process.
-	another (rare indeed) case of a bug introduced because perl_checker
-	wanted us to localize a file handle :-(
-
-	* common.pm (require_root_capability): having extracted it from
-	interactive enable
-	to further simplify it
-	strip authentification out of interactive->vnew into common.pm
-	This enable apps that still use gtk+-1.2 via my_gtk to still work when
-	they only need interactive->vnew('su') just to get root capabilities.
-	Indeed, interactive load ugtk if it has access to the X server, which
-	make my_gtk and ugtk fight for the cpu forever... which is bad imho...
-	drakfloppy and net_monitor were converted to use it and are now usuable
-	again
-	("i leave ...  again" commit).
-	
-	it would also enable to complete spec 64 by enabling rpmdrake
-	to use kdesu under kde and consolehelper under gnome.
-	rpmdrake is indeed the last program to not behave like
-	the running desktop to get root capability.
-	
-	unless someone is against this, i'll convert the mcc and all other gtk+
-	pure
-	tools to do not use anymore interactive just to get root capability.
-	
-	
-	btw, i fixed the infamous SECTOR_SIZE warning...
-
-	* standalone/harddrake2: make interactive help window be modal, aka
-	transcient for main ugtk2
-	window
-	perl_checker fix
-	use new help system
-
-	* network/netconnect.pm: let drakconnect be less verbose: aka explain
-	rename of old configuration files
-	if that had been already done
-
-	* standalone/drakhelp: 
-	  - strict mode
-	  - we need at least 1 argument, and only one
-
-2003/01/26  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/es.po, share/po/zh_CN.po: updated Spanish and Chinese files
-
-	* share/po/et.po: updated Estonian file
-
-2003/01/25  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sq.po: updated po file
-
-2003/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk2.pm (ask_browse_tree_info): better look when embedded in a smaller
-	window
-
-2003/01/24  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* detect_devices.pm: get back serial modem detection
-
-	* drakxtools.spec: new version
-
-	* network/network.pm: fix typo
-
-2003/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive/gtk.pm: remove unused variable
-	fix Return key on a radio button grabbing focus on next functional group
-	of widgets AND doing an action on it (toggling checkbuttons etc) (needs
-	perl-GTK2 >= 0.0.cvs.2003.01.24.1)
-
-	* mouse.pm: remove blinks in mouse test
-
-2003/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_list, ask_from_list_, ...): option nocancel
-	added
-	(ask_yesorno): no "Cancel" or "Previous" button
-
-	* install_any.pm, install_steps_interactive.pm: fix "Previous" button in
-	warnAboutNaughtyServers, so there is 3 choices
-	(Previous, unselect servers, accept :)
-
-	* install_steps_gtk.pm, mouse.pm: 
-	  - don't setMouseLive when the protocol hasn't changed
-	  - don't say "MOVE YOUR WHEEL" when there is no wheel and the protocol
-	hasn't changed
-	(nb: no wheel + IMPS/2 can now happen for usb mice)
-
-2003/01/24  alus
-
-	* share/po/pl.po: done
-
-2003/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* common.pm, c/stuff.xs.pl, interactive.pm, lang.pm: fix non latin1
-	post-install perl-gtk2 apps, seems like perl upgrading strings to utf8
-	is somewhat broken (dunno why), so now we bind the codeset or our
-	textdomains to utf8 and tag the translated strings to utf8, when using
-	gtk
-
-	* mouse.pm: remove blinks in mouse test
-
-2003/01/24  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sq.po, share/po/it.po, share/po/nl.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po,
-	share/po/hu.po: updated pot file (English proofreading)
-
-	* standalone/draksplash, standalone/logdrake, standalone/draksec,
-	share/compssUsers.desktop, standalone/harddrake2,
-	standalone/net_monitor, standalone/mousedrake, standalone/drakperm,
-	standalone/scannerdrake: English proofreading
-
-	* share/po/et.po: updated Estonian file
-	updated pot file (English proofreading)
-
-2003/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm: 
-	  - don't setMouseLive when the protocol hasn't changed
-	  - don't say "MOVE YOUR WHEEL" when there is no wheel and the protocol
-	hasn't changed
-	(nb: no wheel + IMPS/2 can now happen for usb mice)
-	  - switch "<= 3 buttons usb mice" from X protocol PS/2 to IMPS/2 (it
-	works
-	nicely, and redhat do so)
-	  - default usb mice to USB|Wheel instead of USB|Generic, since most
-	(all?) usb
-	mice have a wheel
-	(i tested on 1 button mac mouse, it works nicely with ZAxisMapping and
-	IMPS/2)
-
-	* interactive.pm (ask_from_list, ask_from_list_, ...): option nocancel
-	added
-	(ask_yesorno): no "Cancel" or "Previous" button
-
-	* install_any.pm, install_steps_interactive.pm: fix "Previous" button in
-	warnAboutNaughtyServers, so there is 3 choices
-	(Previous, unselect servers, accept :)
-
-	* install_steps_gtk.pm: 
-	  - don't setMouseLive when the protocol hasn't changed
-	  - don't say "MOVE YOUR WHEEL" when there is no wheel and the protocol
-	hasn't changed
-	(nb: no wheel + IMPS/2 can now happen for usb mice)
-
-2003/01/23  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* lang.pm: fixed some (locally used) charset names
-
-	* share/po/et.po: updated Estonian file
-
-2003/01/23  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/main.pm (configure_chooser_raw): no special case for "Next"
-	button
-
-	* install_steps_interactive.pm (formatMountPartitions): help perl
-	(otherwise wait_message stays forever in newt)
-
-	* interactive/newt.pm: fix special case "for license agreement": only use
-	it for long messages, and fix {format} use
-	add a button to "summary"-like dialog boxes
-
-2003/01/23  alus
-
-	* share/po/pl.po: updated
-
-2003/01/23  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm, network/ethernet.pm: 
-	  - perl_checker compliant
-	  - s/$pump/$auto_ip/
-	  - use join('', if_(..), if_(..))
-	  - each_index instead of for
-	  - various fixes
-
-	* network/netconnect.pm, network/modem.pm, network/isdn.pm,
-	network/adsl.pm: isdn.pm now in use strict
-	little cleanup
-
-2003/01/23  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po: updated Estonian file
-
-	* share/po/ko.po: Changes asked by HP people to Korean translation
-
-2003/01/23  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/main.pm (configure_chooser_raw): no special case for "Next"
-	button
-
-	* common.pm: better fix of ->isa use
-	remove use of UNIVERSAL::isa() (it is not much more complex with ref +
-	->isa, and UNIVERSAL::isa() would need a special case in perl_checker)
-
-	* keyboard.pm (read): fix return value when no configured keyboard is
-	found
-
-	* diskdrake/interactive.pm: fix diskdrake in newt (causing error about
-	missing method ->cylinder_size)
-
-	* Xconfig/xfree3.pm, Xconfig/xfreeX.pm, Xconfig/xfree4.pm: introduce
-	->is_fbdev, and use it to simplify ->set_resolution
-
-	* install_any.pm (getHds): do not handle missing harddrives by calling
-	setupSCSI, since
-	setupSCSI do it by itself now
-
-	* interactive/newt.pm: fix special case "for license agreement": only use
-	it for long messages, and fix {format} use
-	add a button to "summary"-like dialog boxes
-	  - handle {ok_disabled}
-	  - correctly wrap messages
-	  - fix Textbox size
-	  - fix Listbox size
-	  - special code to handle the license dialog
-
-	* Xconfig/various.pm (to_string): created, try to shortly describe current
-	configuration
-	(configure_FB_TVOUT): don't do anything when not using XF4
-
-	* interactive/gtk.pm: focus first widget when there is no ok
-
-	* Xconfig/xfree.pm (is_fbdev): created
-	(get_both, set_both): skip modifications on missing xfree3 or xfree4
-
-	* install_steps_interactive.pm (formatMountPartitions): help perl
-	(otherwise wait_message stays forever in newt)
-	(reallyChooseGroups): remove "Previous" button
-	(setupSCSI): remove now unused variable $clicked
-	(summary): display more nicely the current X config when fbdev
-	(selectLanguage): no need to handle "Cancel" on language choosing :)
-	(setupSCSI): handle calling modules::interactive::load_category in
-	non-automatic mode when no harddrives are found
-
-	* modules/interactive.pm (load_category__prompt_for_more): cleanup,
-	propose "See hardware info" in any case
-
-	* network/network.pm: pixelification
-
-2003/01/23  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: fix perl-GTK2 dependancy
-	9.1-0.13mdk
-
-	* standalone/drakpxe: perl_checker fix
-
-	* network/ethernet.pm: 
-	  - force use strict
-	  - perl_checker fix
-
-	* network/isdn.pm: force strict pragma
-	force strict mode
-
-	* interactive/gtk.pm: workaround bug introduced by new pixel focus
-	managment
-
-	* standalone/service_harddrake: perl_checker fix
-	reconfigure sound slots at boot time (we should enhance slot filling
-	by keeping existent module affectation, aka keep user choice if his
-	module for slot X is not the default one)
-
-	* network/netconnect.pm, network/tools.pm, network/shorewall.pm,
-	network/network.pm, network/modem.pm: force strict mode
-
-2003/01/22  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/adsl.pm: 
-	  - speedtouch fixes :
-	o binaries location from /usr/bin to /usr/sbin
-	  o clean previous instance of pppoa3 according to modem id (-c)
-	(special thanks to Corsikas who proudly brings this patch to me :)
-
-2003/01/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: perl checker fixes.
-
-	* bootloader.pm: fix call to sanitize_ver by giving it linux-$version
-	instead of linux$ext.
-
-2003/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/stuff.xs.pl, lang.pm: fix accents characters displaying in console
-	mode during install:
-	  - convert translations into utf8 only during install && if using gtk
-	  - explicitely bind the codeset to the specified locale's encoding
-	because
-	during install they are reported as utf8
-
-	* ugtk2.pm: correctly pop when F2 (screenshots)
-	revive F1, F2 and alt-e (dialogs for F1 and F2 are broken, though)
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl, mdk-stage1/probing.c: add
-	full pci probe support
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: have pci usb controllers
-	sorted alphabetically
-
-	* common.pm: correctly pop when F2 (screenshots)
-	fix accents characters displaying in console mode during install:
-	  - convert translations into utf8 only during install && if using gtk
-	  - explicitely bind the codeset to the specified locale's encoding
-	because
-	during install they are reported as utf8
-
-2003/01/22  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/lt.po, share/po/he.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/sq.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	pot file
-
-	* standalone/draksplash, standalone/drakbackup, standalone/drakfloppy,
-	standalone/drakfont, standalone/drakconnect, standalone/drakgw,
-	standalone/drakperm: English proofreading
-
-	* lang.pm: small changes in charset naming so they work better in console
-	(console
-	is still not in utf-8)
-
-	* share/po/et.po, share/po/fi.po: updated pot file
-	updated Finnish and Estonian files
-
-2003/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: call "yelp-pregenerate -a" after installing pkgs
-	(since it's skipped DURING_INSTALL)
-	  - remove createBootdisk step
-	  - add mkbootdisk option in setupBootloader__general()
-	  - move kernelVersion() from install_any to any
-
-	* interactive.pm: add some documentation about the various possible fields
-
-	* interactive/gtk.pm: add {callbacks}{ok_disabled}
-
-	* network/network.pm: simplify easy_dhcp prototype
-
-	* install_steps_interactive.pm (acceptLicense): use new "interactive"
-	feature to gray "Next" button until
-	license is accepted
-	simplify easy_dhcp prototype
-	  - remove createBootdisk step
-	  - add mkbootdisk option in setupBootloader__general()
-	  - move kernelVersion() from install_any to any
-
-	* any.pm, install2.pm, install_any.pm, steps.pm: 
-	  - remove createBootdisk step
-	  - add mkbootdisk option in setupBootloader__general()
-	  - move kernelVersion() from install_any to any
-
-2003/01/22  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* network/netconnect.pm, network/network.pm, standalone/mousedrake,
-	printer/printerdrake.pm, harddrake/TODO, standalone/drakxtv:
-	perl_checker fixes
-
-	* standalone/drakfont: 
-	  - perl_checker fixes
-	  - is_a_font(): display the non existant file we just checked for
-	instead of an undefined value
-	fix progressbar label initialization
-
-	* harddrake/sound.pm: 
-	  - if there's no know driver, offer to pick a driver in the drivers
-	list in case ldetect-lst isn't up to date but the user know which
-	  driver to use
-	  - consolidate "pick any driver" entry
-
-2003/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, install_any.pm, install2.pm, steps.pm,
-	install_steps_interactive.pm: 
-	  - remove createBootdisk step
-	  - add mkbootdisk option in setupBootloader__general()
-	  - move kernelVersion() from install_any to any
-
-2003/01/21  alus
-
-	* share/po/pl.po: utf-8 again
-	updated again...? And again UTF -> ISO
-	back from UTF-8 to ISO-8859-2 ... Why Why Why? It should work from
-	UTF-8...
-
-2003/01/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/drakpxe: latest fixes for having default file correctly
-	documented and make sure if
-	server boot using dhcp itself, server hostname is given instead of ip
-	address.
-	add daemons stop/start code.
-	update with something that look like running.
-
-2003/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mouse.pm: fix absence of scroll up and scroll down in mouse test
-
-	* interactive/gtk.pm, install_steps_gtk.pm: perl-GTK2 0.0.cvs.2003.01.21.1
-	should fix set_active(undef) misbehaviour
-
-	* ugtk2.pm: seems like gdk_window_foreign_new is leaking as well..
-	since gtkset_mousecursor is called by a timeout, don't leak
-	memory because it can lead to problems on the long term
-
-2003/01/21  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: updated Vietnamese and Polish files
-	English proofreading (first pass)
-
-	* network/adsl.pm: English proofreading by Stew Beneditcs
-
-	* share/po/sk.po, share/po/DrakX.pot, share/po/zh_CN.po: English
-	proofreading (first pass)
-	updated Slovak and Chinese files
-
-	* network/isdn.pm: English proofreading (first pass)
-	English proofreading by Stew Benedicts
-
-	* share/po/pl.po: updated Vietnamese and Polish files
-
-	* network/network.pm, share/po/gl.po, share/po/pt_BR.po, share/po/th.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/be.po,
-	share/advertising/01-thanks.pl, share/po/ko.po, standalone/drakTermServ,
-	share/po/sv.po, share/po/sr.po, share/po/fi.po, share/po/he.po,
-	share/advertising/05-games.pl, share/po/da.po, share/po/ca.po,
-	share/po/ar.po, share/advertising/04-multimedia.pl, share/po/ro.po,
-	security/level.pm, share/po/zh_TW.po, share/po/sq.po, share/po/it.po,
-	share/po/eu.po, share/po/es.po, share/advertising/07-desktop.pl,
-	network/shorewall.pm, network/tools.pm,
-	share/advertising/08-development.pl, share/advertising/06-mcc.pl,
-	share/po/lv.po, share/po/hu.po, printer/printerdrake.pm, share/po/id.po,
-	share/po/ru.po, share/po/br.po, share/po/sl.po, share/po/no.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/uk.po,
-	share/advertising/03-internet.pl, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, partition_table/raw.pm, share/po/bs.po, share/po/wa.po,
-	share/po/is.po, standalone/drakfont, share/po/af.po, share/po/az.po,
-	share/po/pt.po, share/po/ta.po, share/po/fr.po, share/po/nl.po,
-	share/po/de.po, share/po/eo.po, share/po/bg.po, share/po/cs.po,
-	share/po/el.po: English proofreading (first pass)
-
-	* bootlook.pm, install_steps_interactive.pm, network/netconnect.pm,
-	network/drakfirewall.pm, standalone/mousedrake,
-	diskdrake/interactive.pm, Xconfig/monitor.pm, install_any.pm,
-	harddrake/v4l.pm, modules/interactive.pm, any.pm, harddrake/sound.pm,
-	services.pm, network/ethernet.pm, bootloader.pm: English proofreading by
-	Stew Benedicts
-
-2003/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* steps.pm: on error in acceptLicense, go back to selectLanguage (ie.
-	handle "Previous ->" correctly)
-
-	* Xconfig/various.pm, Xconfig/card.pm: have Xfree version at only one
-	place
-	(nb: it would be better to parse available package and get version from
-	it.)
-
-	* install_interactive.pm: remove or fix some "Previous"
-
-	* help.pm: "license" is now step "acceptLicense"
-
-	* interactive.pm: when the return value of ask_from_ and ask_from is not
-	used, do not have a
-	"Previous ->" or "Cancel" button (beware, black magic here :)
-
-	* interactive/gtk.pm: remove unused variable
-	(ask_fromW): very smart code to know which widget to focus (dilemna is:
-	"Next" vs first widget). One can also force focusing of first widget
-	using $common->{focus_first}
-	(ask_fromW): have "advanced" widgets above buttons, not below
-	(create_list): fix old bug (nb: this code must be unused)
-	(create_boxradio): need to set {focus_w} to the selected widget (nb:
-	this is ugly)
-	(create_boxradio, $may_go_to_next): no special case for "tab", gtk2
-	handles things better than gtk1
-	($set_all): pass the full_struct to the setters (this allows modifying
-	{focus_w}) (nb: this is ugly)
-
-	* install_gtk.pm: enlarge "steps" window a little
-	small enhancement to know which step is currently done
-
-	* ugtk2.pm: enlarge "steps" window a little
-	(create_okcancel): rework to prepare next move, "Next" and "Previous" on
-	the left, and @other buttons on the right
-	(create_hbox): do handle the layout parameter
-
-	* install_steps_interactive.pm: replace "Next" button with "Reboot" at
-	exitInstall step
-	remove or fix some "Previous"
-	(acceptLicense): handle "Previous ->" correctly, and simplify code
-	(esp. don't set useless_thing_accepted)
-
-	* any.pm (setupBootloader__mbr_or_not): add ability to skip and to put on
-	floppy
-	rework autologin dialog box
-	(selectLanguage): no "Previous ->" during install
-
-	* diskdrake/interactive.pm (Mount_point): use uniq() on suggested mount
-	points (otherwise the suggested mount point appears twice) (fixes bug
-	#954)
-
-	* install2.pm: don't prompt for license when useless_thing_accepted
-	(this used to be done in install_steps_interactive::acceptLicense)
-
-	* install_steps_gtk.pm: workaround set_active on Gtk2::CheckButton widgets
-	thinking undef is true :-(
-	(hopefully, gc will fix perl-GTK2!)
-	replace some "Ok" with "Next ->"
-
-	* Xconfig/main.pm: replace some "Ok" with "Next ->"
-
-2003/01/21  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm, printer/printerdrake.pm: 
-	  - Support for manufacturer-supplied PostScript PPDs also in
-	recommended
-	mode.
-	  - If "Foomatic + Postscript" is recommended driver for a printer and a
-	  manufacturer-supplied PPD file exists for it, the PPD file gets the
-	  recommended driver.
-	  - Tried to extract IEEE-1284 auto-detection info from the PPD files
-	but
-	  this takes too long time (40 sec for 800 PPDs).
-	  - Fixed long-standing bug in activation of auto-load of the USB
-	"printer"
-	  kernel module.
-
-2003/01/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/TODO: update
-
-	* share/po/fr.po: update french translation
-
-	* harddrake/sound.pm: handle proprietary drivers
-	if there's no alternative driver or if the current setting does not
-	please the user, let he pick any driver among multimedia/sound modules
-	category
-
-2003/01/20  alus
-
-	* share/po/pl.po: updated
-
-2003/01/20  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/adsl.pm: little cleanup
-
-	* network/network.pm: void label removed
-	  - zero conf is avaible in drakconnect, with/without dhcp
-	  - install tmdns and zcip packages when needed
-
-	* network/tools.pm: get username back in menu
-
-	* network/ethernet.pm: 
-	  - zero conf is avaible in drakconnect, with/without dhcp
-	  - install tmdns and zcip packages when needed
-
-2003/01/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/drakpxe: initial revision with translation message.
-
-	* Makefile.config: added drakpxe
-
-2003/01/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Xconfig/test.pm: use gtk rather than qiv to display the background tile
-	in X test
-	fix Gtk2 port
-
-2003/01/20  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/fi.po, share/po/sp.po, share/po/tr.po: updated
-	Finnish, Serbian and Turkish files
-
-	* share/po/et.po: updated Estonian file
-
-	* keyboard.pm: small keyboard name change
-
-	* share/po/es.po, share/po/ar.po: updated Spanish and Arabic files
-
-2003/01/20  Till Kamppeter  <till@mandrakesoft.com>
-
-	* share/rpmsrate: Make flphoto getting onto the CDs.
-
-	* printer/main.pm: Improved printer/driver list entries for PostScript PPD
-	files.
-	Improve association of printers with database entries (preparation for
-	non-interactive print queue generation):
-	  - Make use of device ID strings in the Foomatic database
-	 - Association of generic printers when PDL (PCL, PCL-XL, PostScript)
-	could
-	   be auto-detected
-	 - Cleaned up entries from manufacturer-supplied PPDs for PostScript
-	   printers to try to match model names of Foomatic entries
-	 - Bug fixes on previous association mechanism
-
-	* detect_devices.pm, printer/printerdrake.pm: Improve association of
-	printers with database entries (preparation for
-	non-interactive print queue generation):
-	  - Make use of device ID strings in the Foomatic database
-	 - Association of generic printers when PDL (PCL, PCL-XL, PostScript)
-	could
-	   be auto-detected
-	 - Cleaned up entries from manufacturer-supplied PPDs for PostScript
-	   printers to try to match model names of Foomatic entries
-	 - Bug fixes on previous association mechanism
-
-2003/01/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/sound.pm: make all chkconfig calls be chrooted
-
-	* services.pm: fix prefix usage
-
-	* mouse.pm: fix gtk+-2 port
-
-	* standalone/draksec: use new help scheme just added to msec (this *does*
-	need a newer msec
-	package!!)
-
-	* standalone.pm: fix breakage introduced when lowering warning level
-
-2003/01/19  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/sq.po: updated Danish and Albanian files
-
-2003/01/18  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/mapping, tools/ppc/magic: Update magic, mapping files for PPC
-	from Christian Walther
-
-2003/01/17  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm, network/ethernet.pm: 
-	  - some changes to dhcp behavior for beta2 (not clean yet)
-
-	* drakxtools.spec: 0.12mdk
-
-2003/01/17  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ru.po: updated po file
-
-	* share/po/it.po: updated Italian file
-
-2003/01/17  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: do not remove mdk_10.pcf in the ramdisk
-	(or handle it in lang.pm since it seems to be needed for greek display)
-
-2003/01/17  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm: airport support for ppc
-
-2003/01/17  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: add some applications on club voting
-
-2003/01/16  alus
-
-	* share/po/pl.po: updated
-
-2003/01/16  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* Makefile.drakxtools: 
-	  - drakhelp moved to /usr/bin/
-
-	* standalone/drakhelp: 
-	  - checker
-	  - support gnome help
-	  - warn if documentation is not installed
-	  - syntax : drakhelp relative_link
-	example: drakhelp Quick_Startup.html/drakx.html
-	  - drakhelp will check the running wm and will launch kdehelpcenter
-	  with the correct URL after localizing the link.
-	  Otherwise, it launch a default browser: mozilla konqueror or galeon.
-
-	* standalone.pm: 
-	  - remove help callback (moved into drakhelp)
-
-	* Makefile.config: 
-	  - add drakhelp
-
-2003/01/16  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: 
-	  - fix /etc/hosts localhost.localdomain in localhost
-
-2003/01/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed not to ask group instead of
-	individual package selection.
-
-2003/01/16  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* keyboard.pm, lang.pm: Added some more English locales; and changed all
-	locale names using xx
-	notation to xx_YY notation (so it's easier to just append a ".UTF-8" in
-	case we provide a way to let the user choose if he wants UTF-8 or not)
-
-2003/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: workaround ref count perl bug
-
-	* share/step-orange-click.xpm, share/step-red-on.xpm,
-	share/step-orange.xpm, share/step-red-click.xpm,
-	share/step-green-on.xpm, install2.pm, share/step-green.xpm,
-	install_steps.pm, install_gtk.pm, share/step-green-click.xpm,
-	share/step-red.xpm, install_steps_interactive.pm, steps.pm,
-	share/step-orange-on.xpm: new steps window layout
-
-2003/01/16  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/harddrake2, services.pm: fix embedding
-
-2003/01/16  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone.pm: 
-	  - remove help callback (moved into drakhelp)
-
-	* standalone/drakhelp: 
-	  - syntax : drakhelp relative_link
-	example: drakhelp Quick_Startup.html/drakx.html
-	  - drakhelp will check the running wm and will launch kdehelpcenter
-	  with the correct URL after localizing the link.
-	  Otherwise, it launch a default browser: mozilla konqueror or galeon.
-
-	* Makefile.config: 
-	  - add drakhelp
-
-2003/01/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: do not propose individual package on
-	upgrade.
-
-	* install_steps.pm: fixed test of alternatives always seen as broken.
-
-2003/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add coreutils-doc by default
-	add hdparm in default install (esp. per cooker request)
-
-	* install_steps_interactive.pm: new steps window layout
-	ask security level in every install
-	hopefully last titi's bug on getSoundDevices :-(
-
-	* share/po/Makefile: don't yell when checking for "$" in DrakX.pot and
-	only finding "\$"
-
-	* steps.pm: new steps window layout
-	ask security level in every install
-
-	* security/level.pm, standalone/drakconnect, network/netconnect.pm,
-	standalone/drakperm, standalone/net_monitor, detect_devices.pm,
-	network/tools.pm: replace occurences of "$foo ? $foo : $bar" with "$foo
-	|| $bar"
-
-	* standalone/service_harddrake, standalone.pm: make perl_checker happy
-
-	* network/network.pm: replace occurences of "$foo ? $foo : $bar" with
-	"$foo || $bar"
-	have dhcp-client the default dhcp client
-
-	* share/step-orange-click.xpm, share/step-red-on.xpm,
-	share/step-orange.xpm, share/step-green-on.xpm, share/step-green.xpm,
-	install_steps.pm, install_gtk.pm, share/step-green-click.xpm,
-	share/step-orange-on.xpm, share/step-red-click.xpm, install2.pm,
-	share/step-red.xpm: new steps window layout
-
-	* install_steps_auto_install.pm: configureNetwork step must be non-auto
-	otherwise only
-	install_steps::configureNetwork is called
-
-2003/01/16  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakbug, bootlook.pm, log.pm, standalone.pm,
-	standalone/draksec, standalone/drakTermServ, harddrake/v4l.pm,
-	standalone/drakxtv, standalone/drakgw, harddrake/TODO: "je n'en veux +
-	de cette engeance" (c) pixel :
-	make explanations provided by log and not anymore by standalone,
-	thus preventing using standalone in drakx (which is bad)
-
-	* standalone/service_harddrake, standalone/drakautoinst: perl_checker
-	fixes
-	"je n'en veux + de cette engeance" (c) pixel :
-	make explanations provided by log and not anymore by standalone,
-	thus preventing using standalone in drakx (which is bad)
-
-	* drakxtools.spec: require an recent enought MDK::Common
-
-	* harddrake/sound.pm: "je n'en veux + de cette engeance" (c) pixel :
-	make explanations provided by log and not anymore by standalone,
-	thus preventing using standalone in drakx (which is bad)
-	happy drakx
-	move "require standalone" where needed
-	fix sound configuration while installing
-
-2003/01/16  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: beta 2
-
-	* share/rpmsrate: move gnucash up on mandrakeclub demand
-
-2003/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix typo
-	(selectInstallClass): display mandrake release version when listing the
-	choices of partitions to upgrade
-
-	* install_steps.pm: adapt to install_any::find_root_parts() return value
-	changes
-
-	* install_any.pm (find_root_parts):
-	  - do not use guess_mount_point() anymore
-	  - check /etc/mandrake-release instead of /etc/fstab
-	  - return a list of { release => "Mandrake Linux release X.X (XXXX)",
-	part => ... }
-	instead of a list of parts
-
-	* harddrake/sound.pm: do not "use standalone" in a module used during
-	install!
-
-2003/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: don't yell when checking for "$" in DrakX.pot and
-	only finding "\$"
-
-	* install_steps_interactive.pm: hopefully last titi's bug on
-	getSoundDevices :-(
-
-2003/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix typo
-	(selectInstallClass): display mandrake release version when listing the
-	choices of partitions to upgrade
-
-	* install_steps.pm: adapt to install_any::find_root_parts() return value
-	changes
-
-	* install_any.pm (find_root_parts):
-	  - do not use guess_mount_point() anymore
-	  - check /etc/mandrake-release instead of /etc/fstab
-	  - return a list of { release => "Mandrake Linux release X.X (XXXX)",
-	part => ... }
-	instead of a list of parts
-
-	* harddrake/sound.pm: do not "use standalone" in a module used during
-	install!
-
-2003/01/15  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/he.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/sq.po, share/po/it.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file
-
-	* share/po/nl.po: updated pot file
-	fixed encoding problem
-	updated Dutch file
-
-	* lang.pm: Added "Amharic" in the languages list, so it can be choosed and
-	its
-	translations can get installed from the rpm packages
-
-2003/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest_onmbr): log the choice
-
-	* patch/patch-9.0-auto-inst-network-config.pl: fix for network module
-	probe & configuration in interactive auto_install
-
-	* install_steps.pm: adapt to install_any::find_root_parts() return value
-	changes
-
-	* install_steps_interactive.pm (selectInstallClass): display mandrake
-	release version when listing the choices of partitions to upgrade
-
-	* install_any.pm (find_root_parts):
-	  - do not use guess_mount_point() anymore
-	  - check /etc/mandrake-release instead of /etc/fstab
-	  - return a list of { release => "Mandrake Linux release X.X (XXXX)",
-	part => ... }
-	instead of a list of parts
-
-	* install_steps_auto_install.pm: move
-	install_steps_auto_install_non_interactive::configureNetwork() to
-	install_steps_auto_install::configureNetwork() as it should be
-	(thanks to Luc Bourdot)
-
-	* harddrake/sound.pm: do not "use standalone" in a module used during
-	install!
-
-2003/01/15  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/sound.pm: snd-sscape does not exist
-	  - factorize snd devices listing in detect_devices::getSoundDevices()
-	so that each caller is ppc aware
-	  - factorize sound slots configuration into
-	  harddrake::sound::configure_sound_slots() so that harddrake service
-	  will eventually set them at bootstrapping time
-
-	* standalone/drakproxy: drakproxy need common for getVarsFromSh()
-
-	* detect_devices.pm, install2.pm, install_steps_interactive.pm: 
-	  - factorize snd devices listing in detect_devices::getSoundDevices()
-	so that each caller is ppc aware
-	  - factorize sound slots configuration into
-	  harddrake::sound::configure_sound_slots() so that harddrake service
-	  will eventually set them at bootstrapping time
-
-	* standalone/harddrake2: add an option to skip jazz drives detection
-
-2003/01/14  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/list: /usr/share/magic has moved to /usr/share/misc/magic
-
-	* any.pm: ensure cancel on setupBootloader__mbr_or_not do cancel
-
-	* modules.pm: changes to have less "Use of uninitialized value"
-
-	* printer/printerdrake.pm: please perl_checker
-
-	* share/list: unicore/To/Fold.pl is necessary to fix "panic: swash_fetch"
-	error occuring in
-	a regexp with /i on ->{device} (fixes bug #799)
-
-	* install2.pm: don't probe mouse when testing (startup is now much faster)
-	remove the ugly temporary fix for fontconfig
-	remove duplicate code
-	don't automatically configure network on upgrade, now only done when
-	called via summary
-
-	* sbus_probing/main.pm: fix bug & cleanup (to have less warning in debug
-	mode)
-
-	* interactive/gtk.pm: set_active on Gtk2::CheckButton is pretty dumb, it
-	thinks undef is true ;p
-
-2003/01/14  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/data.pm, printer/printerdrake.pm: Removed bugs from Titi which
-	prevented printerdrake from installing the requested spooler.
-
-2003/01/14  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakfont: fix font_choice()
-
-	* harddrake/check_snd.pl: add harddrake::sound checker
-
-2003/01/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: unicore/To/Fold.pl is necessary to fix "panic: swash_fetch"
-	error occuring in
-	a regexp with /i on ->{device} (fixes bug #799)
-
-	* install2.pm: don't automatically configure network on upgrade, now only
-	done when called via summary
-
-2003/01/14  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/sound.pm: add missing sound modules (found by check_snd in
-	comparing
-	harddrake::sound vs list_modules).  we only left audio and bttv...
-	add a "trouble shooting" window
-
-	* harddrake/check_snd.pl: add harddrake::sound checker
-
-	* standalone/drakfont: fix font_choice()
-
-2003/01/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: don't say "You must have a swap partition"
-	(since it's after using diskdrake which is for experts)
-
-2003/01/13  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/detect.pm: New CUPS printer sharing configuration dialog.
-	Reverted broken printer::main::set_usermode() to version of Mandrake
-	9.0.
-
-	* printer/main.pm: Avoid unnecessary restarts of the CUPS daemon.
-	New CUPS printer sharing configuration dialog.
-	Reverted broken printer::main::set_usermode() to version of Mandrake
-	9.0.
-
-	* printer/printerdrake.pm: Avoid unnecessary restarts of the CUPS daemon.
-	Removed debug helper line.
-	New CUPS printer sharing configuration dialog.
-	Reverted broken printer::main::set_usermode() to version of Mandrake
-	9.0.
-
-2003/01/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* printer/data.pm: remove old bug reference
-
-	* share/po/fr.po: typo fix
-
-	* printer/main.pm: make get_descr_from_ppd() clearer by :
-	  - using cat_() instead of manual open or ...
-	  - using "$var = s/$regexp//" instead of
-	"var=/regexp\(...\)/; var=$1;"
-	simplify set_cups_autoconf()
-	add_spooler_to_security_level(), configure_queue()
-	and config_sane() :
-	factorize common code, aka resuse MDK::Common
-
-	* harddrake/data.pm: add support for zip drives
-
-	* harddrake/TODO: update
-
-	* standalone/harddrake2: it's uneeded to force scalar context
-	this is not a per class help, but we told the user what
-	he can achieve (aka not only on startup)
-	listlength() is obviously just "overhead" for arrays
-	use diskdrake to configure cdroms, dvroms, cd|dvd -burners,
-	floppies and zip drives
-
-	* printer/printerdrake.pm: print_testpages() : factorize and simplify
-	options managment
-	by using an options hash
-	setup_local_autoscan():
-	  - don't reinvent the wheel, reverse is faster
-	  - remove doble $device initialization in one path
-	setup_local_autoscan() : simplify loop of loop
-	and optimize away useless $alreadyfound
-
-2003/01/12  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Albanian and Swedish files
-
-2003/01/12  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/comparisons: add explained changes in hwdata and kudzu from redhat
-	8.0 to 8.1beta
-	add changes between anaconda 8.0 and current
-
-	* drakxtools.spec: drakxtools need latest perl-MDK-Common
-
-2003/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: capitalise win $domain ASAP so that directory
-	/home/$domain is created
-	capitalised (thanks to Buchan Milne)
-
-2003/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: do not use supermount by default
-	(readBootloaderConfigBeforeInstall): set bootUnsafe to 0 when upgrading
-	so
-	that it doesn't ask where to install the bootloader (mbr vs boot
-	partition)
-
-2003/01/10  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/netconnect.pm: 
-	  - catch wizcancel die
-	  - fix fucked previous button after configuration completes
-	  - little cleanup
-
-2003/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: do not use supermount by default
-	(readBootloaderConfigBeforeInstall): set bootUnsafe to 0 when upgrading
-	so
-	that it doesn't ask where to install the bootloader (mbr vs boot
-	partition)
-	simplify and factorize
-	(now works on 1.upgrade 2.install 3.install + change existing config)
-
-	* Xconfig/card.pm: fix priority
-
-	* Xconfig/main.pm, standalone/XFdrake, install_steps_interactive.pm:
-	simplify and factorize
-	(now works on 1.upgrade 2.install 3.install + change existing config)
-
-	* fsedit.pm: lvm on / works (dixit Brian J. Murrell)
-
-	* install2.pm: fix unused vars
-
-2003/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: changed interface of detect_devices::install_addons.
-
-	* detect_devices.pm: add update-ldetect-lst after install_addons.
-
-2003/01/09  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/fi.po, share/po/sq.po: updated Finnish and Albanian files
-
-2003/01/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureNetwork): call
-	install_steps::configureNetwork()
-	  - configureNetwork step now only does easy_dhcp()
-	  - added full network configuration to summary
-
-	* network/network.pm (easy_dhcp): don't call network::configureNetwork2
-	  - fix priority
-	  - add a log
-
-	* install2.pm: 
-	  - configureNetwork step now only does easy_dhcp()
-	  - added full network configuration to summary
-
-	* install_steps_gtk.pm (installPackages): do pop error messages
-
-2003/01/09  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/main.pm: Added cupsd.conf handling functions for a new printer
-	sharing configuration dialog.
-
-2003/01/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: fix invalid translation for draksound
-
-	* harddrake/sound.pm: there's an oss usb driver too
-	  - snd-rme9652 is a snd-rme96 sub module
-	  - fix rme96xx <=> snd-rme96 equivalence
-	quite a number of ensoniq cards are managed by sb.o
-	  - pss is the oss equivalent of alsa ad1848
-	  - oss ad1848 is not a driver but a sub module
-	cmi8330 is handled by sb too
-	als100 card is handled by sb oss sound driver
-	oss trident driver handle ali5451 too
-	  - remove doble
-	  - add a comment noting there's no alsa alternative for oss' ad1889
-	driver
-	fix "unlisted driver" bug for rme driver
-	  - add new oss drivers : ad1889, ali5455 and forte
-	  - mark forte as oss counterpart for alsa snd-fm801 driver
-	  - mark ice1712 as oss counterpart for alsa snd-ice1712 driver
-	  - mark ali5455 as one of the oss counterpart for alsa snd-intel8x0
-	  driver
-	  - update top commentary
-	  - snd-via686 and snd-via8233 were merged in via82cxxx_audio
-	  - don't pollute install ml anymore
-
-	* keyboard.pm: make return value name more explicit
-	simplify
-
-2003/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: added install_addons to install pcitable or usbtable
-	addons.
-
-	* install2.pm: removed perl_checker warning.
-	added install_addons before leaving.
-
-	* any.pm: really install the bootloader.
-
-2003/01/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk2.pm: fix a misc bug in rpmdrake (selecting a pkg doesn't work in
-	certain circumstances - seems to be when the treeview doesn't have the
-	focus, for exa
-	mple after a search) by changing a bit the way we handle
-	button_press_event in ask_browse_tree_info
-
-2003/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* network/network.pm: pass $::prefix instead of ''
-	fix typo
-	(easy_dhcp): cleanup
-
-	* install2.pm: UGLY TEMPORARY FIX: create an /etc/passwd for fontconfig
-
-	* ugtk2.pm: ensure drakx don't need wiz_default_up.png and
-	wiz_default_left.png
-
-2003/01/08  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer/office.pm: Fixed Titi's bugs in the auto-configuration of
-	printers in OpenOffice.org.
-
-2003/01/08  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* printer/printerdrake.pm: once we identify the protocal, skip remaining
-	tests
-
-	* printer/office.pm: 
-	  - typo fix
-	  - s/if !/unless/
-	  - remove useless next
-
-2003/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk2.pm: ensure drakx don't need wiz_default_up.png and
-	wiz_default_left.png
-
-2003/01/07  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: "require bootloader" where needed
-
-	* interactive/gtk.pm, install_steps_gtk.pm, install_gtk.pm, install2.pm,
-	ugtk2.pm: 
-	  - remove help (which was at the bottom)
-	  - wizard style
-	  - focus "Next" button by default (this is rough, some dialog boxes
-	*need* changes
-	before being able to complete (think root password dialog))
-
-	* diskdrake/hd_gtk.pm: fix ugly global setting of $ugtk2::pop_it
-
-2003/01/07  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - new way to use request help
-
-	* standalone.pm: 
-	  - compress code (pixel)
-	  - use ask_warn when no browser is found on the system and BROWSER env
-	var not set.
-
-2003/01/07  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: add network::easy_dhcp function. Quietly setup eth0
-	in dhcp and restart network.
-
-2003/01/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/issue: version 9.1 cooker
-
-	* rescue/devices.pl: init doesn't like anymore that /etc/initctl is
-	already here
-	(breaks any communication to init :/); remove /etc/initctl from
-	the initial filesystem, and let init create it as a fifo during
-	boot
-
-2003/01/07  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/th.po: converted th.po to UTF-8
-
-	* share/po/pl.po: converted pl.po to utf-8
-
-2003/01/07  Pixel  <pixel@mandrakesoft.com>
-
-	* steps.pm: move "configureX" step before "summary" step
-	move setupBootloader before summary
-
-	* any.pm: "require bootloader" where needed
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-	  - part of setupBootloader() are now in setupBootloader__mbr_or_not(),
-	setupBootloader__general() and setupBootloader__boot_bios_drive()
-	  - this allows the creation of the new setupBootloader_simple() which
-	is
-	somehow similar to the old setupBootloader() in beginner mode
-	  - setupBootloader() is now always expert mode
-
-	* printer/printerdrake.pm: 
-	  - fix autodetection code (remember me to teach titi that "and" in list
-	context is bad)
-	  - use printer::detect::whatNetPrinter directly (instead of
-	net_detect() +
-	net_smb_detect()), it is faster when one wants both
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* install_steps_interactive.pm (summary): add X configuration
-	(configureX): this step is now always automatic. don't call
-	configureXAfter() when config failed
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-	  - adapt to new setupBootloader
-	  - add bootloader configuration in summary (still rough)
-	  - various cleanup
-
-	* crypto.pm: cleanup and add a comment (!)
-
-	* install_steps.pm: cleanup
-	fix looking for broken alternatives
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-	  - adapt to new setupBootloader
-	  - add bootloader configuration in summary (still rough)
-	  - various cleanup
-
-	* network/network.pm, Xconfig/xfreeX.pm, network/smb.pm, lang.pm,
-	network/drakfirewall.pm, raid.pm, diskdrake/smbnfs_gtk.pm,
-	partition_table.pm, printer/main.pm, diskdrake/interactive.pm, pkgs.pm,
-	interactive/newt.pm, fs.pm, standalone/drakfont, network/ethernet.pm,
-	common.pm, detect_devices.pm, modules.pm, install_any.pm, timezone.pm:
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* Xconfig/card.pm (configure): do not do card_config__not_listed in $auto
-	mode
-	(configure): return without doing anything when probe fails or
-	needVideoRam in $auto mode
-	(multi_head_choose): be completly automatic in $auto mode
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* bootloader.pm: use "if any" instead of "if grep", and various other
-	occurences of "any", "every", "partition"
-	(method_choices): returns the choices of bootloaders (lilo, grub,
-	yaboot...) + cleanup
-	(suggest_onmbr): "lilo" and "grub" are now "unsafe" "on_mbr" choices
-	  - renaming of $lilo with $bootloader
-	  - $bootloader->{methods} is replaced by the much simpler
-	$bootloader->{method},
-	the special handling of grub (which need to also generate lilo.conf)
-	  is nicely handled in bootloader::install()
-	  - cleanup error handling: it was using the ugly (though safe)
-	/tmp/.error
-	  temporary file, better use an exception
-
-	* printer/detect.pm (detect): don't use net_smb_detect() and net_detect(),
-	call
-	whatNetPrinter() directly asking for both network & smb (faster)
-
-	* Xconfig/various.pm (various): in $auto mode, don't ask about tvout
-
-	* install_gtk.pm, install_steps_gtk.pm: 
-	  - remove help (which was at the bottom)
-	  - wizard style
-	  - focus "Next" button by default (this is rough, some dialog boxes
-	*need* changes
-	before being able to complete (think root password dialog))
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* install_interactive.pm: fsedit::part2hd() returns a scalar, no need to
-	do "my ($hd) = fsedit::part2hd(...)"
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* ugtk2.pm, interactive/gtk.pm: 
-	  - remove help (which was at the bottom)
-	  - wizard style
-	  - focus "Next" button by default (this is rough, some dialog boxes
-	*need* changes
-	before being able to complete (think root password dialog))
-
-	* diskdrake/hd_gtk.pm: fix ugly global setting of $ugtk2::pop_it
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* interactive.pm: fix ask_okcancel in wizard mode
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-	nicer debug message
-
-	* Xconfig/resolution_and_depth.pm (configure): in $auto mode, use
-	$default_resolution without asking
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* Xconfig/monitor.pm: don't do anything when automatic configuration fails
-	in $auto mode
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* Xconfig/main.pm (configure_everything): in $auto mode, don't test nor
-	ask when the config failed
-
-	* fsedit.pm: fsedit::part2hd() returns a scalar, no need to do "my ($hd) =
-	fsedit::part2hd(...)"
-	fix typo (operator priority related)
-	use "if any" instead of "if grep", and various other occurences of
-	"any", "every", "partition"
-
-	* partition_table/raw.pm: use internal_error instead of die for better
-	error message (esp. backtrace)
-
-	* install2.pm: 
-	  - remove help (which was at the bottom)
-	  - wizard style
-	  - focus "Next" button by default (this is rough, some dialog boxes
-	*need* changes
-	before being able to complete (think root password dialog))
-	cleanup
-	  - adapt to new setupBootloader
-	  - add bootloader configuration in summary (still rough)
-	  - various cleanup
-
-2003/01/07  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/data.pm: forgot to commit threat-hub-as-usb-controllers...
-
-	* standalone/draksound: perl_checker fix
-	let it ask for root capabilites if launched in standalone mode
-
-	* printer/printerdrake.pm: printerdrake is back alive
-
-	* printer/gimp.pm: fix new data structure usage
-	fixes
-	  - remove useless $_ setting
-	  - simplify overgianted look for functions
-	  - mask isprinterconfigured() as bogus: if $done is 1 then
-	$sectionfound *is* already 1
-	  - simplify by reusing list_passwd()
-	  - simplify program flow
-	  - one perl_checker fix
-	  - simplify directories list building
-	  - simplify test: if a file is a plain regular file, testing if it's a
-	  directory is useless;
-	  anyway, this test is probably bogus and should just be -e and not -f
-
-	* printer/office.pm: fix new data structure usage
-
-	* printer/main.pm: printerdrake is back alive
-	perl_checker fix
-	beautify
-	simplif installed spoolers "detection"
-
-	* Xconfig/card.pm: fix pixel sucks(bis)
-
-	* ugtk2.pm: CList and CTree being deprecated and unsupported in perl-gtk2,
-	don't bother handle them
-
-	* drakxtools.spec: 9.1-0.9mdk
-	9.1-0.8mdk
-
-	* Xconfig/resolution_and_depth.pm: fix pixel sucks
-
-2003/01/07  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (method_choices): returns the choices of bootloaders
-	(lilo, grub, yaboot...) + cleanup
-	(suggest_onmbr): "lilo" and "grub" are now "unsafe" "on_mbr" choices
-	  - renaming of $lilo with $bootloader
-	  - $bootloader->{methods} is replaced by the much simpler
-	$bootloader->{method},
-	the special handling of grub (which need to also generate lilo.conf)
-	  is nicely handled in bootloader::install()
-	  - cleanup error handling: it was using the ugly (though safe)
-	/tmp/.error
-	  temporary file, better use an exception
-
-	* any.pm: 
-	  - part of setupBootloader() are now in setupBootloader__mbr_or_not(),
-	setupBootloader__general() and setupBootloader__boot_bios_drive()
-	  - this allows the creation of the new setupBootloader_simple() which
-	is
-	somehow similar to the old setupBootloader() in beginner mode
-	  - setupBootloader() is now always expert mode
-
-	* interactive.pm: nicer debug message
-
-	* steps.pm: move setupBootloader before summary
-
-	* install_steps.pm, install2.pm, install_steps_interactive.pm: 
-	  - adapt to new setupBootloader
-	  - add bootloader configuration in summary (still rough)
-	  - various cleanup
-
-2003/01/06  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone.pm: 
-	  - perl checker
-	  - no retval
-	  - function on_request_help to display online help.
-	  - use it as callback to help button or help menu.
-
-	* standalone/drakbug: 
-	  - support help system
-	  - remove unused function
-
-2003/01/06  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* keyboard.pm: synchronized with XFree86 4.2.99 keyboard layout names
-
-2003/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: fix typos (thanks
-	perl_checko!)
-	selectInstallClass now automatically detect if an existing install is
-	there,
-	and propose update or install based on this
-
-	* bootloader.pm: when reading existing config, remove double quotes around
-	the default label
-
-	* install2.pm (selectKeyboard): read existing keyboard config even if not
-	upgrading (it
-	won't do anything when not upgrading :)
-	(selectInstallClass): do not move step doPartitionDisks after setupSCSI
-	on
-	upgrade (since the "upgrade" part of the job of doPartitionDisks is now
-	done in selectInstallClass)
-	(selectMouse): "addToBeDone mouse::write()" was done only on upgrade,
-	replace it with an "addToBeDone" done in any case which only does
-	"mouse::write()" if $o->{isUpgrade} is set (since isUpgrade *will* be
-	set
-	correctly but is not set at this step)
-
-	* steps.pm: 
-	  - selectMouse is now just after selectLanguage
-	  - selectSCSI is before selectInstallClass
-
-	* Makefile: when taking files from perl-GTK2, don't
-	/usr/lib/libDrakX/ugtk2.pm since we don't need it
-
-	* install_interactive.pm (partition_with_diskdrake): fix reloading
-	partition table
-
-	* common.pm: common::secured_file() is a wrapper around
-	c::is_secure_file()
-
-	* any.pm: fix "Where do you want to install the bootloader?" dialog box
-
-	* fs.pm (mount): do not fsck.ext2 when mounting readonly
-
-	* swap.pm: replace *F with $F
-	fix an *old* bug causing pbs when formatting more than one partition
-	using
-	format v0 (occurs when the sizes differ)
-
-2003/01/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: require a recent enough ldetect-lst for fixed usb hubs
-	detection
-	9.1-0.7mdk
-
-	* printer/main.pm: fix displaying list of availlable printer spoolers
-
-	* printer/printerdrake.pm: fix displaying of spooler list
-
-	* printer/gimp.pm: fix printerdrake regarding gimp configuration
-
-	* standalone/logdrake: perl_checker fixes
-	prevent one to write in log buffer
-
-	* printer/data.pm: put full data in all variants of the data structure
-
-	* share/po/fr.po: update french translation
-
-2003/01/05  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: in bootloader configuration, add return values to Add and Remove
-	callbacks
-
-	* interactive.pm: 
-	  - callbacks "Add", "Modify" and "Remove" return undef when they fail
-	  - callback "Add" return the new added element (not handled by
-	interactive emulation, but correctly handled by interactive::gtk native
-	ask_from__add_modify_removeW)
-
-2003/01/05  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: in bootloader configuration, add return values to Add and Remove
-	callbacks
-
-	* interactive.pm: 
-	  - callbacks "Add", "Modify" and "Remove" return undef when they fail
-	  - callback "Add" return the new added element (not handled by
-	interactive emulation, but correctly handled by interactive::gtk native
-	ask_from__add_modify_removeW)
-
-	* interactive/gtk.pm: add ask_from__add_modify_removeW gtk handling
-
-2003/01/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix missing "use modules::interactive"
-	(thanks to David Eastcott)
-
-2003/01/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/stuff.xs.pl: dgettext needs to have previous behaviour in standalone
-	mode (fixes #736)
-
-2003/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: fix call to method ask_from__add_modify_removeW
-
-	* interactive/gtk.pm (create_treeview_list): fix setter
-	  - factorize the creation of the {formatted_list} from {list} for
-	create_boxradio, create_treeview_list, create_treeview_tree
-	  - an added advantage for create_treeview_list is the ability to easily
-	change
-	{list}, {formatted_list} and Gtk2::ListStore without breaking keyboard
-	acceleration (see next commit for a usage of this feature)
-
-	* ugtk2.pm (create_packtable): ScrolledWindow are not the only one allowed
-	to grow,
-	widgets with get_data('must_grow') set are allowed too
-
-	* printer/printerdrake.pm (first_time_dialog): much cleanup (but not
-	tested)
-
-	* mdk-stage1/minilibc.c: add symbols __libc_csu_fini and __libc_csu_init
-	to be compatible with new glibc (?)
-
-2003/01/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/test.pm: X test is now working :)
-
-2003/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: fix call to method ask_from__add_modify_removeW
-
-	* mdk-stage1/minilibc.c: add symbols __libc_csu_fini and __libc_csu_init
-	to be compatible with new glibc (?)
-
-2003/01/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk2.pm: titi's message annoys me too much.. removing it
-
-2003/01/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: replace any::load_category() with
-	modules::interactive::load_category()
-
-	* Xconfig/test.pm: X test is now working :)
-
-	* interactive.pm (ask_from__add_modify_remove): check all callbacks are
-	given
-	(ask_from__add_modify_remove): fix
-	add ask_from__add_modify_remove, and use it for bootloader entries
-
-	* any.pm: add ask_from__add_modify_remove, and use it for bootloader
-	entries
-
-2003/01/02  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk2.pm: 
-	  - Layout widget has native scrolling support
-	  - shadow parameter can always be used
-
-	* standalone.pm: fixes for wizards
-
-	* drakxtools.spec: 9.1-0.6mdk
-	merge in back external stefan changes
-
-	* standalone/logdrake: embedding fixes
-
-2002/12/30  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/fi.po: updated Finnish file
-
-2002/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* network/ethernet.pm: move any::load_category() to
-	network::interactive::load_category()
-	(and a few other functions which are only used by load_category())
-	  - move any::pppConfig() to network::modem::ppp_configure()
-	  - move any::miscellaneousNetwork() to
-	network::network::proxy_configure()
-	(and uses the parameter instead of $::o->{miscellaneous})
-	  - move network::network::miscellaneousNetwork() to
-	network::network::miscellaneous_choose()
-	  (and do not export it)
-	  (and uses a parameter instead of $::o->{miscellaneous})
-	  - move network::modem::pppConfig() to network::modem::ppp_choose()
-	  (and change parameter order, and drop unused parameter $intf)
-	  - do not export network::network::write_interface_conf()
-	  (since it is only used locally (?))
-	  - cleanup network::network::write_interface_conf()
-	  (one still needs to pass $::o->{miscellaneous}{track_network_id} more
-	  cleanly, and use run_program::rooted when calling /sbin/ip)
-
-	* printer/gimp.pm: set_permissions() doesn't want the given file to be
-	$::prefix'ed
-
-	* network/network.pm, standalone/drakproxy: 
-	  - move any::pppConfig() to network::modem::ppp_configure()
-	  - move any::miscellaneousNetwork() to
-	network::network::proxy_configure()
-	(and uses the parameter instead of $::o->{miscellaneous})
-	  - move network::network::miscellaneousNetwork() to
-	network::network::miscellaneous_choose()
-	  (and do not export it)
-	  (and uses a parameter instead of $::o->{miscellaneous})
-	  - move network::modem::pppConfig() to network::modem::ppp_choose()
-	  (and change parameter order, and drop unused parameter $intf)
-	  - do not export network::network::write_interface_conf()
-	  (since it is only used locally (?))
-	  - cleanup network::network::write_interface_conf()
-	  (one still needs to pass $::o->{miscellaneous}{track_network_id} more
-	  cleanly, and use run_program::rooted when calling /sbin/ip)
-
-	* pkgs.pm: use "our" instead of "use vars"
-	*pkg::LOG is unused, so don't export it
-
-	* install_steps.pm: move any::runlevel() to Xconfig::various::runlevel()
-	  - move any::choose_security_level() to security::level::level_choose()
-	  - move any::config_security_user() to
-	security::various::config_security_user()
-	  - move any::config_libsafe() and security::libsafe::config_libsafe()
-	to security::various::config_libsafe()
-	no need to close *pkgs::LOG, pkgs handles it nicely now
-
-	* install_steps_interactive.pm: move any::keyboard_group_toggle_choose()
-	to keyboard::group_toggle_choose()
-	  - move any::choose_security_level() to security::level::level_choose()
-	  - move any::config_security_user() to
-	security::various::config_security_user()
-	  - move any::config_libsafe() and security::libsafe::config_libsafe()
-	to security::various::config_libsafe()
-	cleanup comments
-
-	* security/various.pm: deprecates security::libsafe
-
-	* security/level.pm, security/libsafe.pm, install2.pm: 
-	  - move any::choose_security_level() to security::level::level_choose()
-	  - move any::config_security_user() to
-	security::various::config_security_user()
-	  - move any::config_libsafe() and security::libsafe::config_libsafe()
-	to security::various::config_libsafe()
-
-	* network/modem.pm: in network::modem::configure $intf is unused, rename
-	it to $_intf
-	  - do not use a global $in in network::modem, pass it as a parameter
-	  - create network::modem::ppp_configure_raw() which doesn't need $in
-	(it is only used by network::modem::ppp_configure(), but this is clearer
-	that way)
-	  - use $::prefix instead the global $prefix
-	  - don't pass $prefix to ppp_configure
-	  - move any::pppConfig() to network::modem::ppp_configure()
-	  - move any::miscellaneousNetwork() to
-	network::network::proxy_configure()
-	  (and uses the parameter instead of $::o->{miscellaneous})
-	  - move network::network::miscellaneousNetwork() to
-	network::network::miscellaneous_choose()
-	  (and do not export it)
-	  (and uses a parameter instead of $::o->{miscellaneous})
-	  - move network::modem::pppConfig() to network::modem::ppp_choose()
-	  (and change parameter order, and drop unused parameter $intf)
-	  - do not export network::network::write_interface_conf()
-	  (since it is only used locally (?))
-	  - cleanup network::network::write_interface_conf()
-	  (one still needs to pass $::o->{miscellaneous}{track_network_id} more
-	  cleanly, and use run_program::rooted when calling /sbin/ip)
-
-	* Xconfig/various.pm, bootlook.pm, Xconfig/main.pm: move any::runlevel()
-	to Xconfig::various::runlevel()
-
-	* keyboard.pm, standalone/keyboarddrake: move
-	any::keyboard_group_toggle_choose() to keyboard::group_toggle_choose()
-
-	* network/netconnect.pm: 
-	  - do not use a global $in in network::modem, pass it as a parameter
-	  - create network::modem::ppp_configure_raw() which doesn't need $in
-	(it is only used by network::modem::ppp_configure(), but this is clearer
-	that way)
-
-	* standalone/drakconnect: any::load_category_no_message() doesn't exist
-	anymore, it really is modules::load_category() !
-	  - move any::pppConfig() to network::modem::ppp_configure()
-	  - move any::miscellaneousNetwork() to
-	network::network::proxy_configure()
-	(and uses the parameter instead of $::o->{miscellaneous})
-	  - move network::network::miscellaneousNetwork() to
-	network::network::miscellaneous_choose()
-	  (and do not export it)
-	  (and uses a parameter instead of $::o->{miscellaneous})
-	  - move network::modem::pppConfig() to network::modem::ppp_choose()
-	  (and change parameter order, and drop unused parameter $intf)
-	  - do not export network::network::write_interface_conf()
-	  (since it is only used locally (?))
-	  - cleanup network::network::write_interface_conf()
-	  (one still needs to pass $::o->{miscellaneous}{track_network_id} more
-	  cleanly, and use run_program::rooted when calling /sbin/ip)
-
-	* modules/interactive.pm: move any::load_category() to
-	network::interactive::load_category()
-	(and a few other functions which are only used by load_category())
-
-	* any.pm: cleanup (using ask_from instead of ask_from_listf_)
-	cleanup (using "format => ...")
-	move any::load_category() to network::interactive::load_category()
-	(and a few other functions which are only used by load_category())
-	move any::keyboard_group_toggle_choose() to
-	keyboard::group_toggle_choose()
-	move any::runlevel() to Xconfig::various::runlevel()
-	  - move any::choose_security_level() to security::level::level_choose()
-	  - move any::config_security_user() to
-	security::various::config_security_user()
-	  - move any::config_libsafe() and security::libsafe::config_libsafe()
-	to security::various::config_libsafe()
-	  - move any::pppConfig() to network::modem::ppp_configure()
-	  - move any::miscellaneousNetwork() to
-	network::network::proxy_configure()
-	(and uses the parameter instead of $::o->{miscellaneous})
-	  - move network::network::miscellaneousNetwork() to
-	network::network::miscellaneous_choose()
-	  (and do not export it)
-	  (and uses a parameter instead of $::o->{miscellaneous})
-	  - move network::modem::pppConfig() to network::modem::ppp_choose()
-	  (and change parameter order, and drop unused parameter $intf)
-	  - do not export network::network::write_interface_conf()
-	  (since it is only used locally (?))
-	  - cleanup network::network::write_interface_conf()
-	  (one still needs to pass $::o->{miscellaneous}{track_network_id} more
-	  cleanly, and use run_program::rooted when calling /sbin/ip)
-
-	* network/isdn.pm: 
-	  - do not use a global $in in network::modem, pass it as a parameter
-	  - create network::modem::ppp_configure_raw() which doesn't need $in
-	(it is only used by network::modem::ppp_configure(), but this is clearer
-	that way)
-	  - move any::pppConfig() to network::modem::ppp_configure()
-	  - move any::miscellaneousNetwork() to
-	network::network::proxy_configure()
-	  (and uses the parameter instead of $::o->{miscellaneous})
-	  - move network::network::miscellaneousNetwork() to
-	network::network::miscellaneous_choose()
-	  (and do not export it)
-	  (and uses a parameter instead of $::o->{miscellaneous})
-	  - move network::modem::pppConfig() to network::modem::ppp_choose()
-	  (and change parameter order, and drop unused parameter $intf)
-	  - do not export network::network::write_interface_conf()
-	  (since it is only used locally (?))
-	  - cleanup network::network::write_interface_conf()
-	  (one still needs to pass $::o->{miscellaneous}{track_network_id} more
-	  cleanly, and use run_program::rooted when calling /sbin/ip)
-
-2002/12/28  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone.pm: don't import everything from "common" (including
-	MDK::Common::*) to get rid of
-	warnings "Subroutine renamef redefined ..." "Subroutine linkf redefined
-	..."
-	... (but I don't understand how to make explainations on common_functs
-	work?!)
-
-	* printer/gimp.pm: 
-	  - mkdir_p throws an exception on error, so "mkdir_p() or ..." is dumb,
-	fixing
-	(thanks to Lea Gris)
-	  - use output()
-
-2002/12/24  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: Updated Portuguese file
-
-2002/12/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* lang.pm: CJK font names changes (still doesn't work :/)
-
-	* share/list: perl's automatic utf8 handling will need these files (will
-	try to do better in the future)
-
-	* install_steps_gtk.pm: fix 'bold' advertisements
-
-	* share/fonts.tar.bz2: use another default font
-	have a default fixed alias for a font which will always be here even in
-	ramdisk
-
-	* tools/make_mdkinst_stage2: fonts changes (doesn't work with CJK (at
-	least) in ramdisk, though)
-
-	* Xconfig/resolution_and_depth.pm: workaround gtk bug in
-	gtk_entry_set_text
-	fix titi porting gtk2 without testing enough..
-
-	* interactive/gtk.pm: be more efficient in precomputing, previous
-	situation could lead to several tens of seconds of wait in
-	XFdrake-monitor
-
-2002/12/23  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po: updated Brazilian file
-
-2002/12/23  Pixel  <pixel@mandrakesoft.com>
-
-	* printer/printerdrake.pm: help perl_checker (interactive is used even if
-	the constructor is not there)
-
-	* Xconfig/resolution_and_depth.pm: fix setting size of depth combo
-
-2002/12/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* lang.pm: simplify since we don't use X11 fonts (we can't since
-	GDK_USE_XFT is not switchable once program is launched)
-
-	* mouse.pm: image in CVS is 3b+, not 3bp
-
-	* share/themes-mdk.rc: allow gtk2 theme engine to find pixmaps
-
-	* share/list, Makefile: list files changes for gtk2 (is that really
-	optimal to have utf8.pm and utf8_heavy.pl?)
-
-2002/12/20  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: updated Portuguese file
-	updated Portuguese file
-
-	* share/fonts.tar.bz2: updated fonts tarball, all old bitmap fonts have
-	been removed,
-	now it only includes:
-	  - an OpenType font with glyphs for latin and cyrillic
-	  - two unicode encoded bitmap fonts with glyphs for CJK and Greek
-	(and it could be used for non latin/cyrillic scripts for which there
-	  isn't any outline font available).
-	Those fonts are based on fonts shipped with XFree86 (Nimbus Sans L and
-	"misc-fixed"), but with some modifications (extra glyphs added to
-	complete the "holes" in latin and cyrillic for the outline font,
-	added a few missing chines chars and changed ascii portion from
-	monospaced
-	to varaible width for the bitmap fonts (so the visual output is
-	better)).
-	The choice of bitmap fonts for CJK has been done due to the very huge
-	size of CJK outline fonts.
-
-	* share/po/fi.po: updated Finnish file
-
-	* share/po/eo.po: Small change in Esperanto file
-
-2002/12/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk2.pm: gtk+2 support for plug/socket is back since 2.1.5-2mdk
-
-2002/12/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/doc/README: meuh
-
-2002/12/19  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: updated Portuguese file
-
-	* share/po/ta.po: Converted Tamil file to utf-8
-
-2002/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: add "make test_pms_all"
-
-	* standalone/.perl_checker: use libDrakX from CVS (ie. ..) in perl_checker
-
-	* printer/cups.pm, printer/main.pm, printer/printerdrake.pm: 
-	  - printer::main::read_cups_printer_list() is now
-	printer::cups::read_printer_list() (but it is unused!)
-	  - printer::main::get_cups_remote_queues() is now
-	printer::cups::get_formatted_remote_queues()
-	  - cleanup printer::cups::get_remote_queues() using
-	printer::cups::lpstat_v()
-
-	* standalone/drakupdate_fstab: any::get_secure_level() doesn't exist
-	anymore, use security::level::get() instead (fix titi change)
-
-	* printer/gimp.pm: do not use "$1 !~ ..."
-
-2002/12/19  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: conflict with "non gtk+-2 aware" releases of mcc
-	9.1-0.4mdk
-
-2002/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm, .perl_checker, install_any.pm: new features including checking
-	unused functions, and checking methods being available
-
-	* install2.pm, partition_table.pm: enumerate the various required packages
-	when requiring a package dynamically known
-
-	* standalone.pm, Newt/Newt.pm: help perl_checker knowing packages are used
-	as classes
-
-	* diskdrake/interactive.pm, lvm.pm, fsedit.pm: add "new" to lvm.pm, and
-	use it
-
-	* .cvsignore: ignore .perl_checker.cache
-
-2002/12/18  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: XFdrake gtk+-2
-
-	* Xconfig/test.pm: fix
-	XFdrake gtk+-2
-
-	* standalone/drakperm: 
-	  - basic gtk+-2 port (edition is not ready yet)
-	  - perl_checker fixes
-
-	* ugtk2.pm: perl_checker fixes
-	disable embedded mode for now due to gtk+-2 bugs
-	fix wizards and draconnect:
-	it's the same code as in old my_gtk but i don't understand
-	how it could have worked...
-	yet the logic is quite simple : we add the "previous" button only if
-	we're not in the wizard's first page; but the "next/finish" button
-	must still be added, else the wizard is quite unusefull :-(
-
-	* standalone/harddrake2, harddrake/data.pm: saner default size (too big
-	for 800x600 sadly)
-
-	* standalone/drakconnect: refresh: remove current interfaces before
-	readding them, like it was
-	before
-	  - consolidate some code into new_dialog
-	  - simplify through MDK::Common
-	perl_checker fixes
-	  - gtk+-2 port is completed (switch from CList to TreeView)
-	  - gtk+-2 minor fixes (use new API rather than old one)
-	  - fix non wizard mode (add to frame not to window which is already
-	full)
-	  - wizard mode is fixed by previous ugtk2 fix
-	  - simplify through MDK::Common
-	fix drakconnect warnings
-
-2002/12/17  alus
-
-	* share/po/pl.po: updated
-
-2002/12/17  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* ugtk2.pm: 
-	  - export gtkappend_page
-	  - add gtkappend_page function (for gui building wizard)
-
-2002/12/16  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: updated Portuguese file
-
-2002/12/16  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/card.pm: fix english typo (thanks to J. Grant)
-
-	* mouse.pm: really drop update_type_name
-
-	* fsedit.pm: really drop check()
-
-	* standalone/drakautoinst: use ->method syntax for method call
-
-2002/12/16  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk2.pm: build automatically the font description if needed
-	fix string_size() usage in get_text_coord()
-
-2002/12/14  Pixel  <pixel@mandrakesoft.com>
-
-	* network/netconnect.pm: do not export start_internet and stop_internet
-	(was broken since network::netconnect do not inheritate from Exporter)
-
-2002/12/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_messages.pm: must return a true value
-
-	* interactive/gtk.pm: expand_row no longer bugs, great :)
-
-	* c/stuff.xs.pl: iconv_ is needed all the times, not only in drakx
-
-2002/12/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): drop (unused)
-
-	* detect_devices.pm: drop hasUltra66 (unused)
-
-	* any.pm, bootloader.pm: drop loadlin handling
-
-	* network/network.pm, ugtk.pm, my_gtk.pm, printer/data.pm,
-	partition_table.pm, ugtk2.pm: remove exported names which are not
-	defined
-
-	* printer/main.pm: commit the real code, not the debug code :-(
-	put back the comment
-	(read_cups_printer_list, get_cups_remote_queues): much cleanup
-
-	* fsedit.pm (check): drop it (unused, maybe you should use
-	diskdrake::interactive::check instead)
-
-	* services.pm: use wrap_text (instead of handcoding it)
-
-	* Xconfig/various.pm (show_info): drop (unused)
-
-	* timezone.pm (sexProb): drop (unused!)
-
-	* standalone/drakbackup: replace "%" with "%%" in translated string
-
-	* mouse.pm (update_type_name): drop (unused (?))
-
-	* bootlook.pm: drop unused function
-
-	* fs.pm (add_options): drop (unused, use mount_options_unpack +
-	mount_options_pack instead)
-	(mount_all): drop (unused, use formatMount_all instead)
-
-2002/12/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Makefile.drakxtools, Makefile: fix installation after pixel changes
-
-	* drakxtools.spec: fix {build,}requires for gtk+2
-
-	* ugtk.pm: remove uneeded variables
-
-	* standalone.pm: remove double
-	move draksec's gui into the standalone program,
-	nobody will uses it so it's useless to load drakx with it.
-	also use common cli options managment
-
-	* standalone/harddrake2: perl_checker fixes
-
-	* security/main.pm, standalone/draksec: move draksec's gui into the
-	standalone program,
-	nobody will uses it so it's useless to load drakx with it.
-	also use common cli options managment
-
-2002/12/12  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po, share/po/he.po: Added a starting Hebrew file; updated
-	Portguese file
-
-2002/12/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: remove unused variable $clicked
-	remove some $::expert
-	remove beginner/expert choice
-
-	* install_steps_gtk.pm: remove beginner/expert choice
-
-	* ugtk.pm: unused variables renamed with a leading underscore (some code
-	should be removed?)
-
-	* diskdrake/hd_gtk.pm: when clicking on one of the legend buttons together
-	with an existing partition
-	selected, it doesn't change the partition type, it tells to use "Type"
-	(it used to be ignored in non-expert, and do a change type in expert)
-
-	* install2.pm: drop options "fexpert" and "fbeginner" which used to skip
-	the choice expert/beginner
-
-2002/12/12  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk2.pm: simplify
-	add gtkmodify_font() and gtkset_property()
-
-	* standalone/harddrake2: better english
-	don't confuse people by altering sentences that could have been
-	interpreted as questions
-	  - s/::/:/ on cpu info
-	  - print field names in bold blue rather than just blue
-
-2002/12/11  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/pt.po: updated Portuguese and Chinese files
-
-2002/12/11  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk2.pm: reuse already consolided code
-	reuse already consolided code
-	add set_back_pixbuf() to let a widget paint itself a pixbuf in its
-	background rather that doing this ourselves in rpmdrake or mcc
-
-2002/12/10  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/fake_c.pl: use "perl_checker --generate-pot"
-	instead of fake_c + xgettext
-
-	* Xconfig/test.pm: do not duplicate "An error occurred ..." t10n string
-
-	* any.pm, bootloader.pm: perl_checker --generate-pot is a bit picky about
-	the localisation of "#-PO:" comments
-
-	* install_steps_interactive.pm: fix % in translated string (it must be %%)
-
-	* standalone/drakbug, standalone/logdrake, standalone/drakfloppy,
-	standalone/drakTermServ, standalone/drakautoinst, standalone/drakbackup,
-	standalone/drakconnect, standalone/drakxtv: minimal perl_checker fixes
-	to have only warnings
-
-	* Makefile.config: service_harddrake.sh is not a PM, so i remove it from
-	STANDALONEPMS_
-	live_install is a shell script, do not pretend it's perl ;p
-
-2002/12/10  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* network/netconnect.pm, network/tools.pm, network/isdn.pm,
-	standalone/drakTermServ, standalone/drakxtv: perl_checker fixes
-
-	* standalone/harddrake2: no gratuitously tab
-
-	* standalone/draksplash: 
-	  - gtk+2 port
-	  - "use strict" fixes
-	  - perl_checker fixes
-
-	* standalone/drakconnect: perl_checker fixes
-	fix gtk+2 port
-
-2002/12/09  adesmons
-
-	* network/netconnect.pm: make perl_checker happy
-	drakconnect conf file no more uploaded with now useless variable
-
-	* network/adsl.pm: drakconnect conf file no more uploaded with now useless
-	variable
-
-2002/12/09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/themes-blackwhite.rc, share/themes.rc, share/themes-savane.rc:
-	remove already obsolete themes
-
-	* my_gtk.pm, ugtk2.pm: remove dynamic theme choosing, and next/previous
-	(F11/F12) handling
-	remove code handling setstep
-
-	* diskdrake/hd_gtk.pm, diskdrake/interactive.pm, install_interactive.pm: 
-	  - handle more locally "Reload partition table" (esp. without using
-	setstep)
-	=> no exception is called through gtk
-
-	* interactive/newt.pm, install2.pm: remove code handling setstep
-
-	* install_steps_gtk.pm, install_messages.pm, install_steps_interactive.pm:
-	move long messages (like license) to a new package: install_messages.pm
-
-	* install_gtk.pm: remove unused variable ($step_name)
-	remove code handling setstep
-
-	* any.pm: remove old code
-
-2002/12/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* network/isdn.pm: remove unused modules
-
-2002/12/08  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po: updated Brazilian file
-
-2002/12/07  alus
-
-	* share/po/pl.po: update
-	update
-
-2002/12/07  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sq.po: Added Albanian file
-
-2002/12/06  adesmons
-
-	* network/netconnect.pm, network/tools.pm, network/modem.pm,
-	network/isdn.pm, network/adsl.pm: isdn data are now fetched form system
-	instead of drakconnect conf file
-
-2002/12/06  alus
-
-	* share/po/pl.po: removed unuset texts
-
-2002/12/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk2.pm: don't use unless
-
-	* c/stuff.xs.pl: add bind_textdomain_codeset, iconv the dgettext results
-	to UTF8 since perl seems to mess with that when trying to do so from
-	within gtk2-perl (with sv_utf8_upgrade)
-
-	* install_gtk.pm: better style
-
-	* interactive/gtk.pm: 2.1.3 doesn't have trouble with expand_to_path
-
-	* lang.pm: perl checker OwnZ Da W3rld
-	misc
-
-	* bootlook.pm: perl_checker help'ed fix
-	s/Gtk->/Gtk2->/
-
-2002/12/06  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po, share/po/vi.po: updated po file
-
-2002/12/06  Pixel  <pixel@mandrakesoft.com>
-
-	* network/isdn.pm, standalone/XFdrake: be more perl_checker compliant
-
-2002/12/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_gtk.pm: fix syntax & style
-
-	* lang.pm: try to fix charset2pango_font
-	fix syntax & style
-	add bind_textdomain_codeset
-
-	* ugtk2.pm: remove unused $_lan
-
-2002/12/05  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* standalone/harddrake2, share/po/DrakX.pot, standalone/net_monitor: Fixed
-	some typos or bad English
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/Makefile,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/cs.po,
-	share/po/bg.po, share/po/el.po, share/po/hu.po: updated po files
-
-	* install_gtk.pm: two pango font names, for 10 and 12 sizes
-	made some functions to retrieve pango font namese from lang/charset
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: Changed the way
-	locale->encoding is handled; revert to the old way which was
-	working.
-	And changed the charset to use during install to UTF-8 for all but CJK
-	locales,
-	in the X11 locale config files and in lang.pm;
-	So, the same values of LC_* variables are used as before; but they
-	should
-	point, in glibc and in X11, to UTF-8 locales now
-
-	* lang.pm: made some functions to retrieve pango font namese from
-	lang/charset
-	Changed the way locale->encoding is handled; revert to the old way which
-	was
-	working.
-	And changed the charset to use during install to UTF-8 for all but CJK
-	locales,
-	in the X11 locale config files and in lang.pm;
-	So, the same values of LC_* variables are used as before; but they
-	should
-	point, in glibc and in X11, to UTF-8 locales now
-
-2002/12/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: parameter passing using $_ is bad
-
-	* any.pm: format => sub { ...}  doesn't pass parameter as $_, but as $_[0]
-
-	* printer/main.pm: $_ was not localized, fixing (and cleanup)
-
-	* bootlook.pm: fix typo, be perl_checker compatible
-	packages should not "use lib qw(/usr/lib/libDrakX)"
-
-	* partition_table.pm: replace "map $_->{normal}, @l" with "map {
-	$_->{normal} } @l"
-	(the other form is perl_checker-deprecated)
-
-	* standalone.pm: remove unused variables or rename them with an underscore
-	(eg: $o becomes $_o)
-
-2002/12/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/mousedrake: gtk+2 port (how difficult it was ...)
-
-	* network/netconnect.pm: gtk+-2 port
-
-	* c/Makefile.PL: glib-config is obsolete now
-	gtk+-2 port
-
-	* modules/interactive.pm: bug fix
-
-	* standalone/drakTermServ, standalone/drakconnect: use gtkflush()
-
-	* drakxtools.spec: pre gtk+2 work snapshot for mcc (mandrake_release() and
-	the like
-
-	* standalone/drakgw: gtk+2 fixes
-
-	* bootlook.pm: use gtkflush()
-	start gtk+2 port; perl-gtk2 is expected to implement
-	Gtk::Image->set_from_pixbuf()
-
-	* standalone/drakautoinst: use gtkflush()
-	gtk+2 port
-
-	* standalone/harddrake2: s/describe/describes/
-
-	* standalone/drakfont: fix gtk+-2 port
-	don't use anymore deprecated widgets
-
-	* services.pm: drakxservices' gtk+-2 port
-
-	* standalone/logdrake: fix gtk+2 port
-
-2002/12/04  adesmons
-
-	* network/netconnect.pm, network/tools.pm, network/network.pm,
-	network/modem.pm: More data are now fetched from system instead of
-	drakconnect conf file
-
-2002/12/04  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/locales-skeleton.tar.bz2: added recognition of locale named
-	"en_US.UTF-8"
-
-	* lang.pm: made 'en_US.UTF-8' the default locale for LC_* varaibles during
-	isntall
-
-	* share/fonts.tar.bz2: Put Nimbus Sans L as default font
-	put back the default iso8859-15 fonts used by install.rc
-
-	* install_gtk.pm: put "Nimbus Sans L" as used font
-	try of Gtk2 font definitions
-
-2002/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* network/adsl.pm: remove unused variables or rename them with an
-	underscore (eg: $o becomes $_o)
-	syntax changes to make perl_checker happy
-
-	* install_steps.pm: remove unused code (installCrypto)
-	remove unused variables or rename them with an underscore (eg: $o
-	becomes $_o)
-	do not use "local *F"
-
-	* install_steps_interactive.pm, install2.pm: remove unused code
-	(installCrypto)
-	remove unused variables or rename them with an underscore (eg: $o
-	becomes $_o)
-
-	* interactive.pm: remove unused variables or rename them with an
-	underscore (eg: $o becomes $_o)
-	"require log" causes some pb, perl thinking that "log" is the log()
-	function. So replace it with require 'log.pm' (perl_checker will handle
-	this)
-
-	* fsedit.pm: remove unused variables or rename them with an underscore
-	(eg: $o becomes $_o)
-	use if_() where possible (as reported by perl_checker)
-	don't use "local *F"
-
-	* interactive/stdio.pm: remove unused variables or rename them with an
-	underscore (eg: $o becomes $_o)
-	fix typo
-
-	* crypto.pm: use if_() where possible (as reported by perl_checker)
-
-	* my_gtk.pm, ugtk.pm, printer/printerdrake.pm, ugtk2.pm,
-	install_steps_gtk.pm, printer/main.pm, fs.pm, bootloader.pm: remove
-	unused variables or rename them with an underscore (eg: $o becomes $_o)
-	use if_() where possible (as reported by perl_checker)
-
-	* scanner.pm: remove unused variables or rename them with an underscore
-	(eg: $o becomes $_o)
-	$prefix is no good, replace it with $::prefix
-
-	* partition_table/dos.pm, partition_table/sun.pm, partition_table/bsd.pm,
-	partition_table/empty.pm, keyboard.pm, partition_table/lvm_PV.pm: do not
-	use "local *F"
-
-	* printer/office.pm, Xconfig/parse.pm, network/smb.pm, mouse.pm,
-	resize_fat/io.pm, Xconfig/xfree4.pm, network/drakfirewall.pm,
-	Xconfig/main.pm, diskdrake/smbnfs_gtk.pm, partition_table.pm,
-	printer/common.pm, diskdrake/interactive.pm, pkgs.pm,
-	install_steps_auto_install.pm, diskdrake/hd_gtk.pm, Xconfig/monitor.pm,
-	install_any.pm, diskdrake/removable.pm, network/isdn.pm, swap.pm,
-	resize_fat/directory.pm, devices.pm, commands.pm,
-	install_interactive.pm, printer/gimp.pm, any.pm, interactive/http.pm,
-	printer/detect.pm, ftp.pm, services.pm, interactive/newt.pm,
-	resize_fat/dir_entry.pm, network/ethernet.pm,
-	Xconfig/resolution_and_depth.pm, Xconfig/test.pm, diskdrake/dav.pm,
-	network/smbnfs.pm, interactive/gtk.pm, network/nfs.pm: remove unused
-	variables or rename them with an underscore (eg: $o becomes $_o)
-
-	* standalone.pm: no need to "require common", it is "use"d
-	"require log" causes some pb, perl thinking that "log" is the log()
-	function. So replace it with require 'log.pm' (perl_checker will handle
-	this)
-
-	* network/tools.pm: remove unused variables or rename them with an
-	underscore (eg: $o becomes $_o)
-	my' variables as needed
-
-	* security/main.pm, network/modem.pm: remove unused variables or rename
-	them with an underscore (eg: $o becomes $_o)
-	syntax changes to make perl_checker happy
-	syntax changes to make perl_checker happy
-
-	* network/network.pm: remove unused variables or rename them with an
-	underscore (eg: $o becomes $_o)
-	syntax changes to make perl_checker happy
-	use if_() where possible (as reported by perl_checker)
-
-	* network/netconnect.pm: remove unused variables or rename them with an
-	underscore (eg: $o becomes $_o)
-	  - %l is not used, so why declare it??
-	  - in network::netconnect::main(), declare @l as it should be. But the
-	code is really wrong, it NEEDS fixing (bis)
-	syntax changes to make perl_checker happy
-	use if_() where possible (as reported by perl_checker)
-	syntax changes to make perl_checker happy
-
-	* partition_table/mac.pm, modules.pm, partition_table/raw.pm, loopback.pm:
-	remove unused variables or rename them with an underscore (eg: $o
-	becomes $_o)
-	do not use "local *F"
-
-	* partition_table/gpt.pm: remove unused variables or rename them with an
-	underscore (eg: $o becomes $_o)
-	fix typo ($hd is not available in read_header(), so don't use it)
-	do not use "local *F"
-
-2002/12/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/harddrake2: 
-	  - free objects non freeed by gtk+ (the eternal gobject vs boxed types
-	debat)
-	  - remove dead code
-	  - use ->append_set() everywhere
-	  - strip again vendor name from displayed string (aka keep only the
-	  model description)
-	  - enfoce pixel style : remove () from method calls
-
-	* harddrake/data.pm: display "cpu #<XX>: <name>" for cpus
-
-	* harddrake/TODO: update
-
-2002/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: use option tty7 to force X server to be on tty7
-	(instead of opening tty5 and
-	tty6 so that the next available tty is tty7)
-
-2002/12/04  uid580
-
-	* harddrake/ui.pm: kill "used by only one" harddrake::ui module,
-	move its content to standalone/harddrake2
-	cleanups
-	hide config buttons when switching from a configurable device to a non
-	configurable one
-	fix gtktext_insert() usage
-	gtk+2 port, yeah baby :-)
-
-	* security/main.pm: share common options
-
-	* pkgs.pm: perl_checker
-
-	* standalone/harddrake2, harddrake/data.pm: kill "used by only one"
-	harddrake::ui module,
-	move its content to standalone/harddrake2
-
-	* standalone/drakxservices: strict mode
-
-	* ugtk2.pm: reverse
-	clean up
-
-	* security/msec.pm: 
-	  - fix obvious pixel typo (s/if/if_/)
-	  - no need to maintain dummy documentation about something which is
-	called only in one place
-	  - simplify
-
-2002/12/03  dam's  <dams@idm.fr>
-
-	* any.pm: allow #, and other characters in phone number
-
-2002/12/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: gcsux
-
-	* pkgs.pm, network/tools.pm: make it $::testing aware
-
-	* ugtk2.pm: misc fixes
-
-	* interactive/gtk.pm, diskdrake/hd_gtk.pm, install_steps_gtk.pm, mouse.pm,
-	services.pm, install_gtk.pm, diskdrake/smbnfs_gtk.pm: gtk2
-
-2002/12/03  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po, share/po/ja.po, share/po/vi.po: updated Estonian and
-	Vietnamese files; fixed typo in Japanese file
-
-2002/12/03  Pixel  <pixel@mandrakesoft.com>
-
-	* raid.pm: use output()
-
-	* network/tools.pm: cleanup use of filehandles
-
-	* detect_devices.pm: do not use "local my $F, ...", use "local(my $F, ...)
-	instead
-	do not use "local *F", use run_program::get_stdout() or "local $F"
-	instead
-
-	* scanner.pm, install_any.pm, timezone.pm, partition_table.pm: do not use
-	"local *F", use "my $F" or output() instead
-
-	* install_steps.pm: do not use "local my $F, ...", use "local(my $F, ...)
-	instead
-
-	* network/network.pm (read_resolv_conf): simplify
-
-	* Xconfig/test.pm, devices.pm: do not use "local my $F, ...", use
-	"local(my $F, ...) instead
-	do not use "local *F"
-
-	* commands.pm: do not use "local my $F, ...", use "local(my $F, ...)
-	instead
-	remove pack_ and unpack_ (unused)
-
-	* security/msec.pm: fix typo
-	simplify (esp. use cat_)
-	(get_value): cleanup
-
-	* fs.pm: one need run_program::raw() to use options
-
-	* common.pm: do not use "local my $F, ...", use "local(my $F, ...) instead
-	(formatXiB): simplify
-	use "my $F" instead of "local *F" (and cleanup)
-
-	* network/nfs.pm (find_exports): use run_program::raw + stdout
-
-2002/12/03  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/logdrake, ugtk2.pm: add gtktext_append() and uses it
-
-2002/12/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* common.pm, c/stuff.xs.pl: workaround perl sprintf bug when some
-	parameters are utf8 and some not
-
-	* ugtk2.pm: titisux, revert the pango pixels stuff
-
-2002/12/03  uid551
-
-	* share/fonts.tar.bz2: First try of fonts for Xft2
-
-	* share/po/zh_CN.po, share/po/pt_BR.po: updated Brazilian and Chinese
-	files
-
-2002/12/02  adesmons
-
-	* network/netconnect.pm, network/network.pm, network/modem.pm,
-	standalone/drakconnect, network/adsl.pm: Some data are now fetched from
-	system instead of drakconnect conf file (adsl, ppp, ifcfg-eth)
-
-2002/12/02  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated
-	pot file
-
-2002/12/02  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: remove commented code
-
-	* proxy.pm: this package is unused, no need to keep it
-
-	* install_steps.pm: use output_with_perm()
-	use $::prefix
-	any::runlevel() doesnt need the prefix anymore
-
-	* Xconfig/card.pm: don't use $_
-
-	* bootloader.pm: use output()
-
-	* fs.pm: formatting timeout is now 1 hour
-	remove the duplicate mke2fs (fixes buggy 1.225 change)
-	use append_to_file()
-
-	* install_steps_interactive.pm: any::get_autologin() doesnt modify $o, it
-	returns a hash
-	use $::prefix
-
-	* network/network.pm (add2hosts): use output and pixelization
-
-	* any.pm: use output_with_perm()
-	any::get_autologin() doesnt modify $o, it returns a hash
-	use $::prefix
-	(get_autologin): $o->{autologin} is set to the chosen user only if
-	AUTOLOGIN is set (it now mirrors what set_autologin() does)
-	any::runlevel() doesnt need the prefix anymore
-	use output and append_to_file
-
-	* common.pm (set_alternative): simplify
-	(files_exist): simplify
-
-	* Xconfig/main.pm: any::runlevel() doesnt need the prefix anymore
-
-	* Xconfig/various.pm: 
-	  - any::runlevel() doesnt need the prefix anymore
-	  - fix use of any:runlevel()
-
-	* printer/main.pm, printer/office.pm: simplify
-
-	* network/isdn.pm, network/netconnect.pm, mouse.pm, network/smb.pm,
-	network/tools.pm: use output_with_perm()
-
-	* Makefile: adapt "make test_pms" to new perl_checker
-
-	* bootlook.pm: 
-	  - use any::get_autologin and any::set_autologin
-	  - any::set_autologin doesn't set /etc/sysconfig/autologin to perm 600,
-	is it needed??
-	use any::runlevel()
-
-2002/12/02  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakbug: fix gtk2 port
-
-	* standalone/logdrake: make append option be usable as other ones
-	use named tags for color rather than rgbt triplet,
-	waiting for full foreground-gdk support in perl-gtk2
-	  - gtk2 port
-	  - add a note to remember to try gtkhtml instead of TextView
-	  - make wait message be transcient and modal (we should share some
-	create_*_dialog() around logdrake/mcc/drakfloppy/rpmdrake)
-	  - fixes for 'strict ref'
-
-	* security/main.pm, standalone/drakbackup, standalone/drakconnect: 
-	  - gtk2 port
-	  - perl_checker fixes
-
-	* standalone/drakgw: 
-	  - fix gtk2 port
-	  - let it work with kernel 2.5 too
-
-	* docs/porting-ugtk: add a tool to ease gtk2 port.
-	this is not the rule of thumb but basic stuff.
-
-	* standalone/drakTermServ, standalone/drakfont: 
-	  - gtk2 port
-	  - consolidate some code in text_view()
-	  - perl_checker fixes
-
-	* ugtk2.pm: make append option be usable as other ones
-	gtkfontinfo() is bugged since it uses a C macro which is
-	(oh surprise) not in binary library .... :
-	$fontinfo{$_} = Gtk2::Pango->PANGO_PIXELS($metrics->$func);
-	  - use useless when needed
-	  - gtktext_insert() : add an append argument to prevent overwriting
-	already present text in TextBuffer
-	  - gtkfontinfo() is bugged since it uses a C macro which is
-	  (oh surprise) not in binary library .... :
-	  $fontinfo{$_} = Gtk2::Pango->PANGO_PIXELS($metrics->$func);
-
-2002/11/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* raid.pm: testing aware
-
-	* any.pm: load_category__prompt: use formatAlaTeX
-
-2002/11/28  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/et.po: Updated Estonian file
-
-	* share/po/pt.po: Updated Portuguese file
-
-2002/11/28  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm: fix "ps" and "df" (were broken due to localization of *DF
-	and *PS)
-
-	* bootlook.pm, network/adsl.pm, printer/printerdrake.pm: perl_checker
-	adaptations
-	perl_checker adaptations
-
-	* resize_fat/c_rewritten.pm: to export, one needs to inheritate from
-	Exporter
-
-	* resize_fat/io.pm: perl_checker adaptations
-	remove debug code
-
-	* Makefile: fix removing of pods when installing pms
-
-	* printer/cups.pm, any.pm, install_steps_gtk.pm, printer/main.pm,
-	printer/detect.pm, printer/common.pm, network/network.pm, ftp.pm,
-	services.pm, ugtk.pm, network/isdn.pm, network/ethernet.pm,
-	resize_fat/fat.pm, install_steps_interactive.pm, network/netconnect.pm,
-	lang.pm, network/tools.pm, install_any.pm, printer/gimp.pm,
-	partition_table.pm, harddrake/ui.pm: perl_checker adaptations
-
-	* Xconfig/test.pm: in the test snippet, add "use common" to have access to
-	N()
-
-	* bootloader.pm: 
-	  - compare labels case insensitively (thanks to D.Faure)
-	  - when reading existing config, remove double quotes around the label
-	(thanks to D.Faure)
-	  - add double quotes around the label instead of removing spaces (need
-	checking installkernel compatibility)
-	perl_checker adaptations
-
-2002/11/28  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* services.pm: 
-	  - my_gtk->main already do the kill 'USR2'
-	and hardcoding signal number was bad anyway
-	  - use gtkflush()
-	  - my_gtk->main already do the kill 'USR2'
-	  and hardcoding signal number was bad anyway
-	  - use gtkflush()
-
-	* standalone/drakperm: one more fix
-	  - "use strict" fixes
-	  - perl_checker fixes
-
-	* standalone/drakgw: fix
-
-	* ugtk2.pm: perl_checker fixes
-	fix create_factory_menu*(): since we get an object and not anymore a
-	hash, let just return factory as another variable...
-
-2002/11/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk2.pm: reflect calling style change of PANGO_PIXELS
-
-2002/11/27  Pixel  <pixel@mandrakesoft.com>
-
-	* printer/main.pm: perl_checker adaptations
-	(configure_hpoj): functions dynamically loaded from /usr/sbin/ptal-init
-	are
-	now loaded in printer::hpoj namespace (needs testing)
-
-	* .perl_checker: update for new packages (Gtk2), and remove the
-	now-handled-by-perl_check packages
-
-	* Xconfig/card.pm, bootlook.pm, network/network.pm, log.pm,
-	printer/office.pm, help.pm, scanner.pm, install_steps.pm,
-	Xconfig/parse.pm, install_gtk.pm, network/isdn.pm, interactive.pm,
-	my_gtk.pm, swap.pm, resize_fat/fat.pm, partition_table/gpt.pm,
-	Newt/Newt.pm, resize_fat/c_rewritten.pm, mouse.pm, resize_fat/io.pm,
-	standalone.pm, lang.pm, devices.pm, install2.pm, commands.pm,
-	install_interactive.pm, printer/gimp.pm, partition_table.pm,
-	Xconfig/xfree3.pm, any.pm, install_steps_gtk.pm, printer/detect.pm,
-	interactive/http.pm, diskdrake/interactive.pm, ftp.pm,
-	interactive/stdio.pm, interactive/newt.pm, harddrake/sound.pm, fs.pm,
-	ugtk.pm, network/ethernet.pm, Xconfig/resolution_and_depth.pm,
-	bootloader.pm, Xconfig/test.pm, harddrake/data.pm, Xconfig/monitor.pm,
-	network/adsl.pm, fsedit.pm, modules.pm, network/tools.pm,
-	network/isdn_consts.pm, install_any.pm, printer/printerdrake.pm,
-	timezone.pm, harddrake/ui.pm, c/stuff.pm: perl_checker adaptations
-
-2002/11/27  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - Gtk2 port
-	  - perl_checker fixes
-
-	* standalone/drakbug: 
-	  - Gtk2 port
-	  - one perl_checker fix
-
-	* standalone/mousedrake: restore previous behaviour and exit early only in
-	cancel case
-	fix bad interaction between mcc & mousedrake.
-	interactive already take care of it through my_gtk...
-
-2002/11/26  gbeauchesne
-
-	* install_any.pm: Only all.img is currently used on x86-64, ia64 and ppc.
-	Therefore, don't
-	complain nor try to stat some cdrom.img on first CD.
-
-2002/11/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* unused/demo-frozen-bubble.patch: forgot to commit it (.cvsignore
-	containing * doesn't help)
-
-	* ugtk2.pm: fix typo (gtkstring_size) thx to perl checker
-	fix shadow bug due to wrong extraction of allocation data
-	two small fixes
-	add
-
-	* Makefile: ugtk2.pm is temporarily not in drakxtools but in perl-GTK2
-
-2002/11/26  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* lang.pm: changed values for console font when en_US is chosen
-
-	* share/po/pt.po, share/po/pt_BR.po: Updated Portuguese files
-
-2002/11/26  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm, standalone.pm: no need to call common::backtrace(), use
-	directly backtrace() (was it written that way to workaround a bug in old
-	perl_checker?)
-
-	* ugtk2.pm: make perl_checker happy
-
-	* diskdrake/removable_gtk.pm: fix undeclared variable
-
-2002/11/26  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* printer/main.pm: simplify some stuff
-
-	* harddrake/data.pm: fix eating too much items
-
-	* modules.pm, printer/detect.pm, run_program.pm, services.pm: perl_checker
-	fixes
-
-	* printer/printerdrake.pm: miaouh
-	simplify
-
-2002/11/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: assume any hardware is found (forget to commit).
-
-	* rescue/tree/etc/oem-all: synced with latest change to HP version (and
-	now HP is in CVS).
-
-	* network/netconnect.pm: removed old code (commented out).
-
-	* diskdrake/interactive.pm: revert previous change useless (another
-	problem).
-	added a trailing true value for perl being happy.
-
-	* network/ethernet.pm: add support ADIModem.
-	removed reference to ...->{nb_cards} no more used.
-	removed 2 labels and 2 gotos by a very simple while, dam's is really
-	great
-	sometimes ;-)
-
-	* network/adsl.pm: add support for Sagem USB Modem (for free.fr ;-))
-
-	* network/network.pm: added is_domain_name that checks validity of a
-	domain name.
-
-	* detect_devices.pm: add getSagem() to detect Sagem USB ADSL Modem.
-
-	* install_any.pm: fixes perl-checker importation of bug, getFile is
-	complex for perl newbies, do
-	not rely on perl-checker for trying to "fix" it else it won't run
-	anymore ;-)
-	make it work (changed *F => *GETFILE and added a return) else perl has
-	some
-	problem using it as reference to file handle.
-
-	* mdk-stage1/dietlibc/include/sys/mount.h: fixes for new kernel headers
-	(It should problably be kernel-headers to be
-	modified but it is *much* faster to modify yoyotte's works).
-
-2002/11/25  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: fix typo (openInstallLog *must* return the filehandle)
-	don't use filehandle *pkgs::LOG, use a my'ed $LOG
-	since we use the "fileno", perl doesn't know we're still using the
-	filehandle, and so closes it, and :-(
-
-	* network/netconnect.pm: in network::netconnect::main(), declare @l as it
-	should be. But the code is really wrong, it NEEDS fixing
-	$modem is redefined 2 lines below its first declaration. this first
-	declaration is useless (??)
-
-	* standalone/diskdrake: oops, didn't see titi modified option handling
-	fix handling of options --expert and --testing
-
-	* install_any.pm: use a scalar instead of a typeglob (let typeglobs be
-	deprecated!)
-
-	* lang.pm: fix handling of "all" languages selected
-
-	* network/isdn.pm: since $mouse is undefined, replace it with undef (??)
-
-	* diskdrake/interactive.pm: make perl_checker happy
-
-	* network/tools.pm: 
-	  - $up was my-ed inside the if-then block though it was used outside
-	the block (hint: buggy code)
-	  - my @country as it should be
-
-2002/11/25  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone.pm: 
-	  - simplify --embedded handling
-	  - stricter matching on --no-autoc
-
-	* ugtk.pm: 
-	  - simplify mcc stuff
-	  - prevent bad stacking of right icons in mcc at startup
-
-	* detect_devices.pm: remove dobles
-
-	* my_gtk.pm: warn about broken programs that misuse my_gtk
-	display in mcc when embedded only when ready to interact with the user
-
-	* harddrake/ui.pm: interactive->exit call my_gtk->exit which destroy the
-	window
-
-	* common.pm, standalone/drakbug, standalone/drakbug_report:
-	s/mdk_rel/mandrake_release/
-	consolidate some stuff from standalone tools & mcc into mdk_rel()
-
-2002/11/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: incorporate 8.2 HP fixes back in cooker.
-
-2002/11/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: use ask_warn when I should, and remove a one
-	year old debug statement (???)
-
-2002/11/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/net_monitor: switch latest tools that still manually handle
-	embedding
-	to use my_gtk
-	  - perl_checker fixes
-	  - use my_gtk to transparently handle embedding
-
-	* standalone/drakproxy: this one requires any
-
-	* standalone/drakbug: 
-	  - Gtk::Gdk::ImlibImage is not needed
-	  - perl_checker fixes
-	  - fix interactive exit (s/in/$in/ ->exit)
-
-	* standalone/drakfont, standalone/drakconnect, standalone/drakTermServ,
-	standalone/drakgw: switch latest tools that still manually handle
-	embedding
-	to use my_gtk
-
-	* standalone/drakbackup: switch latest tools that still manually handle
-	embedding
-	to use my_gtk
-	remove dead code about option managment which is
-	obsoleted by standalone
-
-2002/11/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: hide the "please wait" at the latest stage
-
-	* ugtk.pm: 
-	  - api change for latest harddrake
-	  - s/$x ne ''/$x/
-
-	* security/msec.pm: simplify
-	cleanups
-
-	* printer/printerdrake.pm: cleanups
-	update to new security::level scheme
-
-	* standalone/drakbackup: message_noconf_box() and message_underdevel()
-	were quite
-	identical.  let consolidate them
-	message_noselect_box() and message_noselect_what_box() were just
-	identical (but for their label).
-	let consolidate this
-	send_mail_pb() and client_ftp_pb() were just identical (modulo their
-	label)
-	kill heavy duplication in get_cd_info()
-	perl_checker fixes
-	  - don't gratuitously copy a 70 lines help text with typo changes,
-	translators will kill us
-	  - use strict, fix it
-	s/$x ne (0|'')/$x/
-
-	* standalone/logdrake: do not use print_hello() callback, anyway it does
-	not exists (but in
-	drakfloppy ...)
-	  - logdrake does not need any
-	  - use ugtk for gtkcolor & co
-	  - perl_checker fixes
-
-	* standalone/draksec, standalone/service_harddrake, standalone/drakgw,
-	standalone/draksound: perl_checker fixes
-
-	* standalone/draksplash: perl_checker fixes
-	  - fixes for "use strict" (still some work to do since some variables
-	are created through ${ $x.$y }
-	  - use my_gtk :
-	  o clean code
-	  o transparently manage embedding
-	
-	  - perl_checker fixes
-
-	* standalone/drakproxy, standalone/drakupdate_fstab: fix blind copyright
-	copy
-
-	* interactive/stdio.pm, standalone/drakbug, standalone/drakTermServ: s/$x
-	ne (0|'')/$x/
-
-	* standalone/drakfloppy: perl_checker fixes
-	more perl_checker fixes
-	  - don't require unused modules
-	  - use my_gtk to transparently handle embedding
-	  - fixes for strict mode
-	  - fixes for perl_checker (more to come after lunch)
-
-	* bootlook.pm: this is a module, not a program
-
-2002/11/19  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, network/ethernet.pm, share/po/az.po, share/po/zh_TW.po,
-	standalone/drakconnect, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/lv.po, share/po/hu.po: default dhcp client is dhcp-client
-
-2002/11/19  gbeauchesne
-
-	* mdk-stage1/log.c: Don't forget to va_end() what was va_copy()'ed.
-
-2002/11/19  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* keyboard.pm, share/keyboards.tar.bz2: Added Malayalam keyboard
-
-	* share/po/fi.po: updated Finnish file
-
-2002/11/19  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* security/main.pm, any.pm, security/level.pm, install_steps.pm: 
-	  - fix duplication of sec level setting:
-	merge any::get_secure_level() with
-	  secure::msec::get_secure_level()
-	  - move security level functions from secure::msec
-	  to secure::level
-	  - uses secure::level in install_steps
-	  - fix duplication of security level labels
-	  - draksec: use same strings in drakx, got nice
-	  translations
-	  - get_default_checks(): make it more readable
-
-	* mouse.pm: perldoc: explain basic usage of mouse.pm, regarding
-	problems that show up in early interaction between
-	harddrake::data and mouse
-
-	* harddrake/ui.pm: 
-	  - remove debugging code
-	  - document menu building
-	  - add option menu check boxes to prevent (slowly) detecting
-	printers and modems
-	  - remove warnings on usb devices
-	  - explains more cpu bugs
-	  - eventually fix --testing effect
-	  --testing handling was erronously reverted
-
-	* security/msec.pm: 
-	  - fix duplication of sec level setting:
-	merge any::get_secure_level() with
-	  secure::msec::get_secure_level()
-	  - move security level functions from secure::msec
-	  to secure::level
-	  - uses secure::level in install_steps
-	  - fix duplication of security level labels
-	  - draksec: use same strings in drakx, got nice
-	  translations
-	  - get_default_checks(): make it more readable
-	previous example in perldoc was buggy;
-	put one that really works
-
-	* diskdrake/hd_gtk.pm, diskdrake/interactive.pm: make perldoc working
-
-	* harddrake/data.pm: don't display two times some usb mice
-
-	* help.pm: one can now alter settings there
-
-2002/11/18  Pixel  <pixel@mandrakesoft.com>
-
-	* network/netconnect.pm, Xconfig/card.pm, bootlook.pm, printer/main.pm,
-	printer/detect.pm, Xconfig/monitor.pm, network/adsl.pm, standalone.pm,
-	pkgs.pm, harddrake/sound.pm, printer/office.pm, network/isdn.pm,
-	printer/printerdrake.pm, printer/gimp.pm, harddrake/ui.pm: make
-	perl_checker happy
-
-2002/11/18  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/net_monitor, standalone/drakfont: drakbug, drakfont,
-	drakperm, draksplash, drakxtv, harddrake2,
-	net_monitor : final update for common cli options/help manager
-	update copyright years
-
-	* harddrake/TODO: final switch of drakbackup, logdrake and scannerdrake
-	to new option scheme
-
-	* standalone/adduserdrake, standalone/drakxservices, standalone/livedrake,
-	standalone/keyboarddrake, standalone/drakboot, standalone/mousedrake,
-	standalone/drakconnect, standalone/draksound: 
-	  - standalone.pm :
-	o make it be 'use strict' aware
-	  o factorize options managment in one place
-	  - standalone tools :
-	  o they all now support -h|--help -v|--version, ...
-	  o they can add their own options to %standalone::usages
-	  - harddrake : use std --testing/$::testing rather than its own
-	  --test option
-
-	* standalone/draksplash, standalone/harddrake2, standalone/drakbug,
-	standalone/drakperm: drakbug, drakfont, drakperm, draksplash, drakxtv,
-	harddrake2,
-	net_monitor : final update for common cli options/help manager
-
-	* drakxtools.spec: 9.1-0.2dmk
-
-	* standalone/drakautoinst, standalone/printerdrake, standalone/XFdrake,
-	standalone/drakgw: 
-	  - standalone.pm :
-	o make it be 'use strict' aware
-	  o factorize options managment in one place
-	  - standalone tools :
-	  o they all now support -h|--help -v|--version, ...
-	  o they can add their own options to %standalone::usages
-	  - harddrake : use std --testing/$::testing rather than its own
-	  --test option
-	update copyright years
-
-	* standalone/drakfloppy: 
-	  - standalone.pm :
-	o make it be 'use strict' aware
-	  o factorize options managment in one place
-	  - standalone tools :
-	  o they all now support -h|--help -v|--version, ...
-	  o they can add their own options to %standalone::usages
-	  - harddrake : use std --testing/$::testing rather than its own
-	  --test option
-	remove old dead commented i18n code that kept being copied around
-
-	* standalone/diskdrake: final switch of drakbackup, logdrake and
-	scannerdrake
-	to new option scheme
-	  - standalone.pm :
-	o make it be 'use strict' aware
-	  o factorize options managment in one place
-	  - standalone tools :
-	  o they all now support -h|--help -v|--version, ...
-	  o they can add their own options to %standalone::usages
-	  - harddrake : use std --testing/$::testing rather than its own
-	  --test option
-	update copyright years
-
-	* standalone/logdrake: final switch of drakbackup, logdrake and
-	scannerdrake
-	to new option scheme
-	update copyright years
-	  - clean code sot that it runs under "use strict"
-	  - simplify date command construction, this is basic perl :-(
-	  - kill dead old commented code to handle i18n instead of relying on
-	common shared modules
-	remove old dead commented i18n code that kept being copied around
-
-	* modparm.pm, modules/parameters.pm, modules/interactive.pm, any.pm:
-	rename modparm as modules::parameters
-
-	* standalone.pm: drakbug, drakfont, drakperm, draksplash, drakxtv,
-	harddrake2,
-	net_monitor : final update for common cli options/help manager
-	typo fix
-	switch drakTermServ to new option scheme
-	rename modparm as modules::parameters
-	final switch of drakbackup, logdrake and scannerdrake
-	to new option scheme
-	  - standalone.pm :
-	o make it be 'use strict' aware
-	  o factorize options managment in one place
-	  - standalone tools :
-	  o they all now support -h|--help -v|--version, ...
-	  o they can add their own options to %standalone::usages
-	  - harddrake : use std --testing/$::testing rather than its own
-	  --test option
-
-	* standalone/drakxtv: drakbug, drakfont, drakperm, draksplash, drakxtv,
-	harddrake2,
-	net_monitor : final update for common cli options/help manager
-	  - standalone.pm :
-	o make it be 'use strict' aware
-	  o factorize options managment in one place
-	  - standalone tools :
-	  o they all now support -h|--help -v|--version, ...
-	  o they can add their own options to %standalone::usages
-	  - harddrake : use std --testing/$::testing rather than its own
-	  --test option
-
-	* bootlook.pm: switch to new help/options scheme
-	update copyright years
-
-	* harddrake/ui.pm: 
-	  - standalone.pm :
-	o make it be 'use strict' aware
-	  o factorize options managment in one place
-	  - standalone tools :
-	  o they all now support -h|--help -v|--version, ...
-	  o they can add their own options to %standalone::usages
-	  - harddrake : use std --testing/$::testing rather than its own
-	  --test option
-	simplify code though my_gtk::gtkcolor
-
-	* standalone/drakTermServ: switch drakTermServ to new option scheme
-
-	* standalone/drakbackup, standalone/scannerdrake: final switch of
-	drakbackup, logdrake and scannerdrake
-	to new option scheme
-	update copyright years
-
-	* scanner.pm, standalone/drakproxy, security/msec.pm,
-	printer/printerdrake.pm: update copyright years
-
-2002/11/17  alus
-
-	* share/po/pl.po: fix
-
-2002/11/16  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/pt.po: updated Portuguese and Chinese files
-
-2002/11/15  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm, run_program.pm, interactive.pm, c.pm, ftp.pm:
-	s/wantarray/wantarray()/
-
-2002/11/15  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Xconfig/monitor.pm: perl_checker fix
-
-	* harddrake/data.pm: s/usbvideo/usbvision/
-
-	* standalone/drakxtv: typo fix
-
-	* printer/printerdrake.pm: 
-	  - more cleanups
-	  - don't display messages if we're not going to remove/install some
-	packages
-	cleanups
-	cleanups
-	printerdrake::install_spooler() : fix heavy duplication of code
-	by using %spoolers data structure (function shrunked by 66%)
-	consolidate some stuff into printer::data::spoolers{XXX}{alternatives}
-	so that all alternatives get centralized in one data structure
-	cleanups
-
-	* printer/data.pm: printerdrake::install_spooler() : fix heavy duplication
-	of code
-	by using %spoolers data structure (function shrunked by 66%)
-	consolidate some stuff into printer::data::spoolers{XXX}{alternatives}
-	so that all alternatives get centralized in one data structure
-
-	* security/main.pm: 
-	  - use run_program rather than raw system
-	  - kill useless show_msec_help()
-	  - kill commented remanant code of help buttons
-	  - add tooltip with default values on combos & entries
-	  - log about security administrator changes only when we do some
-	  - factorize some code into new_editable_combo() and
-	set_default_tip()
-
-	* Makefile.config, drakxtools.spec, harddrake/sound.pm,
-	Makefile.drakxtools: 
-	  - add missing printer directory
-	  - bump version to 9.1 like most of our packages
-
-2002/11/14  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: updated Romanian file
-
-	* standalone/drakfont: Make drakfont use ttmkfdir again, as it recognizes
-	more encodings,
-	use of parameter "-u" of ttmkfdir to always output unicode entries,
-	call xftcache to create/update the Xftcache files (used by Xft),
-	rewrite fonts.dir (with ttmkfdir) when removing a ttf file so it no
-	longer appears on the font list, and execute "xset fp rehash" after
-	adding/removing fonts, so the font list used by X server is
-	synchronized.
-
-2002/11/14  Pixel  <pixel@mandrakesoft.com>
-
-	* printer/cups.pm, bootlook.pm, network/network.pm, resize_fat/main.pm,
-	printer/office.pm, partition_table/dos.pm, scanner.pm, unused/scsi.pm,
-	my_gtk.pm, swap.pm, install_steps_interactive.pm, Xconfig/xfreeX.pm,
-	network/smb.pm, devices.pm, crypto.pm, commands.pm, printer/gimp.pm,
-	any.pm, install_steps_gtk.pm, printer/main.pm, printer/detect.pm,
-	interactive/stdio.pm, interactive/newt.pm, fs.pm,
-	resize_fat/dir_entry.pm, ugtk.pm, run_program.pm, bootloader.pm,
-	steps.pm, harddrake/data.pm, diskdrake/hd_gtk.pm, interactive/gtk.pm,
-	detect_devices.pm, network/tools.pm, install_any.pm,
-	printer/printerdrake.pm, harddrake/ui.pm: 
-	  - add/remove spaces to make perl_checker happy
-	  - remove redundant parentheses
-	  - add some parentheses for clarity
-
-	* partition_table/mac.pm, ftp.pm, pkgs.pm: make perl_checker happy
-	  - add/remove spaces to make perl_checker happy
-	  - remove redundant parentheses
-	  - add some parentheses for clarity
-
-	* partition_table/gpt.pm, partition_table/raw.pm, partition_table.pm: make
-	perl_checker happy
-
-2002/11/14  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/v4l.pm: resync with bttv-0.7.100 and saa7134-0.2.2snapshot
-
-	* drakxtools.spec: 1.1.12-1mdk
-
-	* security/main.pm: 
-	  - kill unused myexit()
-	  - perl_checker fixes
-
-	* printer/main.pm, printer/data.pm, printer/STATUS, printer/office.pm,
-	printer/gimp.pm: 
-	  - printer::data : export all data structures
-	  - cleanups
-	  - all code is now runnable in strict mode
-
-	* security/msec.pm: 
-	  - perl_checker fixes
-	  - clean code
-	  - simplify config_function()
-
-	* harddrake/ui.pm: explain the detect() vs new() delayed gui construction
-	when embedded
-	display port for network printers too
-
-2002/11/13  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/ru.po: updated Slovak and Russian files
-
-2002/11/13  Pixel  <pixel@mandrakesoft.com>
-
-	* printer/common.pm: fix syntax error
-
-	* Xconfig/various.pm, http.pm, network/network.pm, network/modem.pm,
-	resize_fat/main.pm, install_gtk.pm, interactive.pm, my_gtk.pm, mouse.pm,
-	printer/data.pm, devices.pm, lang.pm, install2.pm, install_steps_gtk.pm,
-	interactive/http.pm, partition_table/mac.pm, pkgs.pm,
-	interactive/newt.pm, network/ethernet.pm, standalone/XFdrake, steps.pm,
-	harddrake/data.pm, keyboard.pm, network/adsl.pm, fsedit.pm,
-	install_any.pm, harddrake/ui.pm: add/remove spaces to make perl_checker
-	happy
-
-	* bootlook.pm, printer/office.pm, scanner.pm, install_steps.pm,
-	network/isdn.pm, install_steps_interactive.pm, network/netconnect.pm,
-	harddrake/v4l.pm, printer/main.pm, harddrake/sound.pm, ugtk.pm,
-	network/tools.pm, printer/printerdrake.pm: add/remove spaces to make
-	perl_checker happy
-	add/remove spaces to make perl_checker happy
-
-2002/11/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* printer/printerdrake.pm: simplify install_spooler() but there's still
-	lot of duplication there
-	(some work for tomorow)
-	  - final switch to $::prefix
-	  - simplify main::get_copiable_queues(), main::setcupslink()
-	  - s/unless (X ne Y)/if (X eq Y)/
-	  - set_usermode() : ensure we add the line if it didn't exists
-
-	* harddrake/ui.pm: display floppy driver type as well as mouse type
-
-	* printer/office.pm: fix files lookup
-	printer::common: export function
-
-	* printer/gimp.pm: don't reinvent the wheel, use common
-
-	* detect_devices.pm: fix vendor/model spliting when there's neither space
-	nor separator
-
-	* printer/common.pm: printer::common: export function
-
-	* printer/main.pm: 
-	  - final switch to $::prefix
-	  - simplify main::get_copiable_queues(), main::setcupslink()
-	  - s/unless (X ne Y)/if (X eq Y)/
-	  - set_usermode() : ensure we add the line if it didn't exists
-	  - set_usermode() : don't reinvent the wheel, use substInFile
-	  - get_usermode() : ditto, use getVarsFromSh
-
-	* drakxtools.spec: pixel neither know how to update cvs nor comitting its
-	changes
-
-2002/11/12  erwan
-
-	* mdk-stage1/network.c, mdk-stage1/stage1.h: Cleaning old stuff
-
-2002/11/12  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2002/11/12  Pixel  <pixel@mandrakesoft.com>
-
-	* security/main.pm, bootlook.pm, printer/main.pm, printer/detect.pm,
-	partition_table/mac.pm, diskdrake/interactive.pm, pkgs.pm, services.pm,
-	printer/office.pm, ugtk.pm, run_program.pm,
-	install_steps_auto_install.pm, bootloader.pm, standalone/XFdrake,
-	network/netconnect.pm, lang.pm, install2.pm, modules.pm, commands.pm,
-	printer/printerdrake.pm, printer/gimp.pm, partition_table.pm: add/remove
-	some spaces to make perl_checker happy
-
-	* diskdrake/removable_gtk.pm: add "use common" for N()
-
-2002/11/12  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* printer/main.pm: kill set_prefix()
-	printer related modules cleaning :
-	  - create the printer/ hierarchy
-	  - split services related stuff into services.pm & printer::services,
-	
-	  - move things that've nothing to do with printers into common.pm
-	  (alternatives, permissions, ...)
-	
-	  - move eveything related to cups, gimp-print, detection,
-	  {star,open}office to the corresponding splited printer:: module
-	
-	  - big consolidation of printer::office (it was obvious there were tons
-	  of duplication between staroffice and openoffice managment)
-	
-	  - move other stuff into printer::main, printer::common,
-	
-	status : print.pm has been heavily splited (now one can begin to
-	understand the little bits).
-	printerdrake still needs to be splited/cleaned and eventually removed
-	since printer/printerdrake modules separation is not understandable by
-	other people
-	
-	till, in printer::gimp, $lprcommand is neither declared nor setted
-	nowhere.  idem in mdk9.0 ...
-
-	* security/main.pm: fix _() -> N() conversion
-
-	* install_steps_interactive.pm: resync with latest printerdrake
-
-	* printer/printerdrake.pm: fix getSNMPModel() location
-	printer related modules cleaning :
-	  - create the printer/ hierarchy
-	  - split services related stuff into services.pm & printer::services,
-	
-	  - move things that've nothing to do with printers into common.pm
-	  (alternatives, permissions, ...)
-	
-	  - move eveything related to cups, gimp-print, detection,
-	  {star,open}office to the corresponding splited printer:: module
-	
-	  - big consolidation of printer::office (it was obvious there were tons
-	  of duplication between staroffice and openoffice managment)
-	
-	  - move other stuff into printer::main, printer::common,
-	
-	status : print.pm has been heavily splited (now one can begin to
-	understand the little bits).
-	printerdrake still needs to be splited/cleaned and eventually removed
-	since printer/printerdrake modules separation is not understandable by
-	other people
-	
-	till, in printer::gimp, $lprcommand is neither declared nor setted
-	nowhere.  idem in mdk9.0 ...
-
-	* drakxtools.spec: 1.1.12-1mdk
-
-	* printer/cups.pm, printer/detect.pm, printer/common.pm,
-	standalone/printerdrake, services.pm, printer/office.pm,
-	printer/default.pm, printer.pm, printer/data.pm, common.pm,
-	printer/services.pm, printerdrake.pm, printer/gimp.pm: printer related
-	modules cleaning :
-	  - create the printer/ hierarchy
-	  - split services related stuff into services.pm & printer::services,
-	
-	  - move things that've nothing to do with printers into common.pm
-	  (alternatives, permissions, ...)
-	
-	  - move eveything related to cups, gimp-print, detection,
-	  {star,open}office to the corresponding splited printer:: module
-	
-	  - big consolidation of printer::office (it was obvious there were tons
-	  of duplication between staroffice and openoffice managment)
-	
-	  - move other stuff into printer::main, printer::common,
-	
-	status : print.pm has been heavily splited (now one can begin to
-	understand the little bits).
-	printerdrake still needs to be splited/cleaned and eventually removed
-	since printer/printerdrake modules separation is not understandable by
-	other people
-	
-	till, in printer::gimp, $lprcommand is neither declared nor setted
-	nowhere.  idem in mdk9.0 ...
-
-	* standalone/drakxtv: don't offer to configure kernel for usbvision (no
-	option for now)
-	handle devices managed by usbvision too
-
-	* install_steps.pm: update for new printerdrake
-
-	* harddrake/data.pm: resync with printerdrake
-	handle devices managed by usbvision too
-	exclude more usb mice from unknown devices
-
-2002/11/11  alus
-
-	* share/po/pl.po: updated
-
-2002/11/11  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/ru.po: updated Russian and Vietnamese files
-
-2002/11/11  Pixel  <pixel@mandrakesoft.com>
-
-	* security/msec.pm: 
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-	add or remove spaces where need to please perl_checker
-	  - use "foreach" instead of "for" in list context
-	  - use "for" instead of "foreach" when used a la C
-	various small syntax enhancements to please perl_checker
-
-	* partition_table/sun.pm: 
-	  - use "foreach" instead of "for" in list context
-	  - use "for" instead of "foreach" when used a la C
-
-	* Xconfig/card.pm, bootlook.pm, my_gtk.pm, network/netconnect.pm,
-	harddrake/data.pm, network/tools.pm, install_any.pm, security/main.pm,
-	network/isdn.pm, harddrake/ui.pm: 
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-	add or remove spaces where need to please perl_checker
-
-	* detect_devices.pm: 
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-	add or remove spaces where need to please perl_checker
-	  - do not use "foreach $var (...) {...}" use "foreach my $var (...)
-	{...}" instead
-	(only pb are functions called in {...} that could use $var, none found
-	except in commands.pm)
-	  - various small syntax enhancements to please perl_checker
-
-	* partition_table/mac.pm: 
-	  - do not use "foreach $var (...) {...}" use "foreach my $var (...)
-	{...}" instead
-	(only pb are functions called in {...} that could use $var, none found
-	except in commands.pm)
-	  - various small syntax enhancements to please perl_checker
-
-	* pkgs.pm: 
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-	  - do not use "foreach $var (...) {...}" use "foreach my $var (...)
-	{...}" instead
-	(only pb are functions called in {...} that could use $var, none found
-	except in commands.pm)
-	  - various small syntax enhancements to please perl_checker
-
-	* network/adsl.pm: 
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-	add or remove spaces where need to please perl_checker
-	replace qq{...} with qq(...)
-
-	* network/network.pm, mouse.pm, standalone.pm, network/drakfirewall.pm,
-	partition_table.pm, partition_table/bsd.pm, ugtk.pm, Xconfig/monitor.pm,
-	modules.pm, network/shorewall.pm, network/modem.pm, resize_fat/main.pm,
-	resize_fat/any.pm, install_gtk.pm, unused/scsi.pm,
-	resize_fat/directory.pm, lang.pm, devices.pm, harddrake/v4l.pm, any.pm,
-	install_steps_gtk.pm, ftp.pm, services.pm, harddrake/sound.pm,
-	Xconfig/test.pm, steps.pm, keyboard.pm, interactive/gtk.pm,
-	partition_table/lvm_PV.pm, network/isdn_consts.pm: add or remove spaces
-	where need to please perl_checker
-
-	* standalone/drakfloppy: don't use <*> for globbing, use all or glob_
-
-	* standalone/logdrake: replace q@...@ with q(...) or here_doc
-
-	* interactive/stdio.pm, common.pm: 
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-	various small syntax enhancements to please perl_checker
-
-	* http.pm, install_steps.pm, interactive/newt.pm, fs.pm, diskdrake/dav.pm:
-	
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-
-	* resize_fat/fat.pm: 
-	  - use "foreach" instead of "for" in list context
-	  - use "for" instead of "foreach" when used a la C
-	various small syntax enhancements to please perl_checker
-
-	* standalone/draksplash, raid.pm, Xconfig/xfreeX.pm,
-	partition_table/raw.pm: various small syntax enhancements to please
-	perl_checker
-
-	* install2.pm: add or remove spaces where need to please perl_checker
-	replace availableMemory with availableMemory()
-
-	* scanner.pm, commands.pm: add or remove spaces where need to please
-	perl_checker
-	  - do not use "foreach $var (...) {...}" use "foreach my $var (...)
-	{...}" instead
-	(only pb are functions called in {...} that could use $var, none found
-	except in commands.pm)
-	  - various small syntax enhancements to please perl_checker
-
-	* install_steps_interactive.pm: 
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-	add or remove spaces where need to please perl_checker
-	replace availableMemory with availableMemory()
-
-	* network/ethernet.pm: add or remove spaces where need to please
-	perl_checker
-	various small syntax enhancements to please perl_checker
-
-	* printerdrake.pm, printer.pm: 
-	  - replace ... =~ 'foo'  with  ... =~ /foo/
-	  - remove unneeded parentheses for things like ... if (...)
-	add or remove spaces where need to please perl_checker
-	  - use "foreach" instead of "for" in list context
-	  - use "for" instead of "foreach" when used a la C
-	  - do not use "foreach $var (...) {...}" use "foreach my $var (...)
-	{...}" instead
-	(only pb are functions called in {...} that could use $var, none found
-	except in commands.pm)
-	  - various small syntax enhancements to please perl_checker
-
-2002/11/10  gbeauchesne
-
-	* mdk-stage1/minilibc.c: Fix implementation of signal() for x86-64, adjust
-	for new kernel-headers
-
-2002/11/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive/http.pm: don't return a typeglob ref, return the typeglob
-	(reference to typeglobs are
-	soft references which doesn't increment the ref count)
-
-	* network/tools.pm: don't return a typeglob ref, return the typeglob
-	(reference to typeglobs are
-	soft references which doesn't increment the ref count) (thanks to Gerard
-	Patel
-	for the precise bug report)
-
-	* standalone/draksplash, standalone/drakperm, standalone/drakbug,
-	bootlook.pm, standalone/harddrake2, standalone/printerdrake,
-	standalone/logdrake, standalone/drakfloppy, standalone/localedrake:
-	ensure "common" is imported to have N()
-
-2002/11/09  Pixel  <pixel@mandrakesoft.com>
-
-	* proxy.pm: fix typo
-
-	* network/tools.pm: 
-	  - do not use q{...} to please perl_checker
-	  - use <<'EOF' instead
-	  - at the same time, fix the "\n" at the beginning of the generated
-	script
-
-	* harddrake/data.pm: make perl_checker happy
-
-2002/11/08  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm: fix my typos
-
-	* my_gtk.pm: normalize
-
-2002/11/07  erwan
-
-	* mdk-stage1/stage1-data/stage1-with-kadeploy.tar.bz2,
-	mdk-stage1/network.c, mdk-stage1/stage1.h, mdk-stage1/url.c: SCSI
-	Support is now activated
-
-	* rescue/Makefile: Adding missing link for test in tree/usr/bin
-
-	* rescue/list, rescue/list.i386: SCSI support now activated
-
-2002/11/07  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* lang.pm: Added definition of default font for Thai
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/nl.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/hu.po: updated
-	pot file
-
-	* share/rpmsrate: Added dependences for greek font and urw-fonts for
-	cyrillic
-
-2002/11/07  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* detect_devices.pm: 
-	  - getCPUs() : fix cpu fields parsing
-	  - harddrake::detect :
-	o describe most cpu fields
-	  o print value of skipped fields
-	perl checker fixes
-	  - harddrake : don't display modem when there're none
-	  - getModem() :
-	       o simplify
-	       o remove unused variables
-	  - getSerialModem() : indent
-
-	* harddrake/ui.pm: 
-	  - getCPUs() : fix cpu fields parsing
-	  - harddrake::detect :
-	o describe most cpu fields
-	  o print value of skipped fields
-	  - describe cpu frequency
-	  - only display help topics related to currently displayed fields in
-	  right framea
-	  - if no device selected, display a message explaining the help dialog
-	  - simplify the unknow driver case for color choice
-	  - only display fields we described
-	perl checker fixes
-	  - add help for some cpu items
-	  - only display choosen items
-	  - remove a dead statement
-
-	* drakxtools.spec: 1.1.11-1mdk
-
-2002/11/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem-all: add extra partition support as primary/logical
-	with configurable size and fs.
-	allow configurable min_size, def_size, trigger_size, inst_size,
-	swap_size.
-
-2002/11/06  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm, install_any.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-	replace complex "unless"s with "if"s
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* printerdrake.pm: replace "for my ..." with "foreach my ..."
-	replace complex "unless"s with "if"s
-	remove unneeded parentheses on the right side of infix if/foreach/unless
-	please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* partition_table/raw.pm: remove unneeded parentheses on the right side of
-	infix if/foreach/unless
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* harddrake/data.pm, install2.pm, standalone/service_harddrake,
-	standalone/scannerdrake: make perl_checker happy
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* network/netconnect.pm, diskdrake/interactive.pm, network/isdn.pm:
-	replace complex "unless"s with "if"s
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* standalone/draksplash, bootlook.pm, share/advertising/14-mdkexpert.pl,
-	standalone/logdrake, share/advertising/17-mdkclub.pl, interactive.pm,
-	my_gtk.pm, share/advertising/11-mdkstore.pl,
-	share/advertising/02-community.pl, share/advertising/01-thanks.pl,
-	mouse.pm, standalone/keyboarddrake, standalone/drakboot,
-	share/po/DrakX.pot, standalone.pm, lvm.pm, standalone/drakTermServ,
-	standalone/net_monitor, share/advertising/05-games.pl,
-	network/drakfirewall.pm, standalone/mousedrake, Xconfig/main.pm,
-	install_steps_newt.pm, standalone/drakbackup, diskdrake/smbnfs_gtk.pm,
-	share/advertising/09-server.pl, share/advertising/04-multimedia.pl,
-	standalone/printerdrake, share/advertising/13-mdkcampus.pl,
-	install_steps_auto_install.pm, standalone/drakconnect,
-	standalone/drakbug, diskdrake/hd_gtk.pm,
-	share/advertising/07-desktop.pl, Xconfig/monitor.pm, network/adsl.pm,
-	proxy.pm, modules.pm, share/advertising/10-mnf.pl, network/shorewall.pm,
-	share/advertising/15-mdkexpert-corporate.pl,
-	share/advertising/08-development.pl, share/advertising/06-mcc.pl,
-	standalone/draksound, standalone/drakxtv, security/main.pm,
-	Xconfig/various.pm, network/modem.pm, help.pm,
-	diskdrake/removable_gtk.pm, install_gtk.pm, diskdrake/removable.pm,
-	standalone/drakautoinst, share/po/b_dump_strings.pm, modparm.pm,
-	install_steps_stdio.pm, Xconfig/xfreeX.pm, standalone/livedrake,
-	share/advertising/03-internet.pl, standalone/harddrake2,
-	harddrake/v4l.pm, modules/interactive.pm, crypto.pm,
-	install_interactive.pm, share/advertising/12-mdkstore.pl,
-	standalone/localedrake, loopback.pm, any.pm, interactive/http.pm,
-	interactive/stdio.pm, standalone/drakfloppy, services.pm,
-	interactive/newt.pm, share/po/Makefile, fs.pm, standalone/drakfont,
-	network/ethernet.pm, Xconfig/resolution_and_depth.pm, standalone/drakgw,
-	steps.pm, keyboard.pm, diskdrake/dav.pm, standalone/drakperm, fsedit.pm,
-	common.pm, share/po/fake_c.pl, harddrake/ui.pm: replace "_" with "N" and
-	"__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* install_steps.pm: replace complex "unless"s with "if"s
-	please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* bootloader.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-	cleanup get_of_dev (aka ofpath)
-	replace complex "unless"s with "if"s
-	remove unneeded parentheses on the right side of infix if/foreach/unless
-	please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* network/network.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-	(write_resolv_conf): much cleanup (originally it was meant to introduce
-	cat_ and output, but it ended up with a complete rewrite :)
-	replace complex "unless"s with "if"s
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* scanner.pm: make perl_checker happy
-	make perl_checker happy
-
-	* commands.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-	(cp): use cp_af
-	please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-
-	* Xconfig/test.pm: please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* standalone/diskdrake, network/nfs.pm: make perl_checker happy
-
-	* Xconfig/card.pm: when needVideoRam, don't take the raw value
-	VideoRam_probed,
-	better take a known value <= VideoRam_probed
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* Xconfig/xfree4.pm: please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-
-	* log.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-
-	* detect_devices.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-	make perl_checker happy
-	replace complex "unless"s with "if"s
-	please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-
-	* ugtk.pm: make perl_checker happy
-	please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* install_steps_interactive.pm, harddrake/sound.pm: make perl_checker
-	happy
-	replace complex "unless"s with "if"s
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* standalone/XFdrake: fix typo
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* raid.pm, network/tools.pm, install_steps_gtk.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* printer.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-	replace "for my ..." with "foreach my ..."
-	remove unneeded parentheses on the right side of infix if/foreach/unless
-	please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-	* pkgs.pm: 
-	  - have "local *FILEHANDLE" before each "open FILEHANDLE, ..."
-	  - use some "cat_" and "output" where possible
-	please perl_checker:
-	  - local'ize $_ before doing while (<...>)
-	  - use "foreach" instead of "for"
-	  - remove unneeded parentheses on the right side of infix
-	if/foreach/unless
-	replace "_" with "N" and "__" with "N_"
-	rationale:
-	  - currently, we use _("xxx") as a shorthand for gettext("xxx"). It
-	also used to call xgettext with --keyword=_
-	
-	  - alas, function &_ is global and not by package (notice esp. that _
-	is not exported in common.pm)
-	
-	  - this lead to big ugly pb with packages defining their own &_,
-	overriding common.pm's &_
-	
-	  - a fix is to set @::textdomains to add a new domain (the default
-	being "libDrakX")
-	
-	but relying on the global "_" is still dangerous!
-
-2002/11/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: 1.1.10-mdk
-
-	* harddrake/sound.pm: fix for modules.pm not exporting
-	category2modules_and_description
-
-2002/11/05  erwan
-
-	* rescue/tree/etc/rc.sysinit: modified rc.sysinit for ka
-
-2002/11/05  gbeauchesne
-
-	* c/smp.c: Revert last change
-	Add generic cpu detection on x86-64 and IA-64, based on
-	sysconf(_SC_NPROCESSORS_ONLN)
-
-	* detect_devices.pm: Detect SMP more easily if we have APIC stuff capable
-
-2002/11/05  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: add /dev/ubd/0, /dev/ubd/1... support (thanks to Brian
-	Murrell)
-
-	* mouse.pm (xmouse2xId): ensure weird ids are ignored
-	use find_index instead of map_index
-
-	* interactive/newt.pm: 
-	  - fix dialog boxes using a scrollbar
-	  - cleanup
-	use each_index instead of map_index when the return value is not used
-
-	* interactive.pm: 
-	  - do not handle "format"ing in interactive for combos
-	  - do it in interactive::gtk instead (that way, "val" is back"format"ed
-	in callbacks as wanted)
-	  - die when editable combos are used with non-strings (like arrays or
-	hashes)
-
-	* partition_table.pm: 
-	  - isUBD can tell wether it is an ubd partition
-	  - isSpecial is true for ubd partitions
-
-	* fs.pm (format_ext2): better error message when it is called from
-	format_ext3
-	(thanks to Brian Murrell)
-
-	* diskdrake/interactive.pm, fsedit.pm: introduce a new flag:
-	getting_rid_of_readonly_allowed. It is set when the partition table
-	badly handled by diskdrake, but we are still allowed to wipe the
-	partition table and start
-	with something new.
-
-	* interactive/gtk.pm: 
-	  - do not handle "format"ing in interactive for combos
-	  - do it in interactive::gtk instead (that way, "val" is back"format"ed
-	in callbacks as wanted)
-	  - die when editable combos are used with non-strings (like arrays or
-	hashes)
-	use each_index instead of map_index when the return value is not used
-
-	* install2.pm: basic uml_install support (thanks to Brian Murrell)
-	use each_index instead of map_index when the return value is not used
-
-	* interactive/http.pm, interactive/stdio.pm, ugtk.pm, raid.pm,
-	bootloader.pm: use each_index instead of map_index when the return value
-	is not used
-
-	* Newt/Newt.xs: 
-	  - fix dialog boxes using a scrollbar
-	  - cleanup
-
-	* services.pm: fix the use of a non-bounded regexp to check services (fix
-	"nfs" being marked
-	on whereas it is "nfslock" which is on)
-
-2002/11/05  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/mkINSTALLCD: Update PPC boot CD creation.
-
-	* mdk-stage1/init.c: PPC TIOCSCTTY changed to 0x540E
-
-2002/11/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: newt rebuild
-
-2002/11/04  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sk.po: updated Slovak file
-
-2002/11/04  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm, Xconfig/xfreeX.pm, Xconfig/parse.pm,
-	standalone/keyboarddrake: add XkbCompat "group_led" for all keyboards
-	where a group layout switching is used
-
-	* Xconfig/xfree.pm: have an empty configuration when a config file is
-	buggy
-
-2002/11/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* printer.pm: typo fixes
-
-	* drakxtools.spec: 1.1.10-2mdk
-
-2002/11/01  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ru.po, share/po/pt_BR.po: updated Russian and Portuguese files
-
-2002/10/31  erwan
-
-	* mdk-stage1/stage1.c, mdk-stage1/network.c, mdk-stage1/tools.c,
-	mdk-stage1/tools.h, mdk-stage1/url.h, mdk-stage1/url.c: Including
-	ka-deploy for stage 2
-
-	* mdk-stage1/stage1-data/stage1-with-kadeploy.tar.bz2: Including ka-deploy
-	for stage 2
-	Adding missing file (stage1-with-kadeploy)
-
-2002/10/30  erwan
-
-	* mdk-stage1/stage1.c, mdk-stage1/network.c, mdk-stage1/stage1.h,
-	mdk-stage1/network.h: Applying patch from 8.2, ka.img is working fine in
-	old mode
-
-2002/10/30  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: updated Portuguese file
-
-2002/10/29  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* bootloader.pm, rescue/list.ppc: Reflect changes in yaboot package.
-
-2002/10/28  alus
-
-	* share/po/pl.po: updated
-	updated translation
-
-2002/10/28  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/modem.pm: add sub winmodemConfigure
-
-	* network/netconnect.pm: few reworks for winmodem detection
-
-	* detect_devices.pm: s#$_->{driver} eq
-	'Bad:www.linmodems.org'#$_->{driver} =~ /www.linmodems.org/# to fit with
-	ldetect
-
-2002/10/28  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: Updated Romanian and Vietnamese files
-
-2002/10/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (preConfigureTimezone): don't set UTC in beginner mode if
-	there is no windows
-
-2002/10/28  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: typo in comments: Josep L. Guallar-Esteve
-	<jlguallar@computer.org>
-
-2002/10/28  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/sound.pm: add new drivers
-
-2002/10/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem-all: reduced version of oem script which allow
-	installing in oem mode but
-	without restricting language and without installing any packages.
-	all package are copied to disk, ie this is an automated hd install
-	builder.
-
-2002/10/25  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/vi.po: updated Chinese and Vietnamese files
-
-2002/10/24  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: Updated
-	pot file
-
-2002/10/23  Pixel  <pixel@mandrakesoft.com>
-
-	* network/netconnect.pm, install_steps_newt.pm, harddrake/sound.pm: make
-	perl_checker happy: replace PKG::f with PKG::f()
-
-2002/10/23  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/data.pm: nono changes for stupid perl_checker whose maintainer
-	don't want to fix deficienties
-	reindent for lord pix
-
-	* harddrake/sound.pm: do a perl_checker pass after pixel one since he only
-	do half the work
-	reindent for lord pix
-
-	* ugtk.pm, printer.pm, network/adsl.pm, printerdrake.pm: perl_checker
-	fixes
-
-	* harddrake/v4l.pm, harddrake/ui.pm: reindent for lord pix
-
-	* detect_devices.pm: fix "poulpy sux"
-
-	* Xconfig/resolution_and_depth.pm: fix pixel code
-
-2002/10/18  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* detect_devices.pm: change dumb return values s/@pci_modems,
-	$serial_modem/$serial_modem, @pci_modems/ (thanks to pixel)
-
-	* network/netconnect.pm: remove useless 'pop'
-	change dumb return values s/@pci_modems, $serial_modem/$serial_modem,
-	@pci_modems/ (thanks to pixel)
-
-2002/10/17  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* harddrake/sound.pm: titi almost sux (he helped me that's why I can't say
-	titi sux :p)
-
-2002/10/17  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm, interactive/gtk.pm, network/modem.pm, Xconfig/monitor.pm,
-	pkgs.pm, interactive/newt.pm, install_steps.pm,
-	Xconfig/resolution_and_depth.pm, install_steps_interactive.pm: make new
-	perl_checker happy: replacing PKG::f by PKG::f()
-
-	* network/netconnect.pm: "=head" doc must end with "=cut"
-
-2002/10/17  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* printer.pm: consolidate more stuff into %spoolers
-	start to consolidate %spoolers as a data structure
-	  - printerdrake::auto_detect(local, net, smb):
-	o split into local_detect, net_detect, net_smb_detect
-	  o detect: return all printers
-	  - printer: consolidate all *help_output into help_output
-
-	* detect_devices.pm: add some comments to getCPUs
-
-	* printerdrake.pm: setup_common: consolidate regexp
-	  - printerdrake::auto_detect(local, net, smb):
-	o split into local_detect, net_detect, net_smb_detect
-	  o detect: return all printers
-	  - printer: consolidate all *help_output into help_output
-
-	* network/netconnect.pm: document network::netconnect::detect()
-
-	* harddrake/data.pm: 
-	  - printerdrake::auto_detect(local, net, smb):
-	o split into local_detect, net_detect, net_smb_detect
-	  o detect: return all printers
-	  - printer: consolidate all *help_output into help_output
-
-2002/10/16  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/netconnect.pm: 
-	  - winmodem detection fix
-
-2002/10/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* my_gtk.pm: fix dams suckiness breaking install2 --test
-
-2002/10/16  Pixel  <pixel@mandrakesoft.com>
-
-	* patch/patch-da.pl, patch/patch-IMPS2.pl: 
-	  - fix for bad da .mo charset
-	  - ugly hack to allow IMPS2 switch to work
-
-	* c/stuff.xs.pl: initIMPS2: use /dev/mouse instead of /dev/cdrom (!)
-
-2002/10/16  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: don't print empty help for fields without any help
-	  - alphabetically sort help items
-	  - add help for some cpu fields
-	fix Gtk::CTree:insert_node inversing devices order
-	  -add cpus detection
-	  - update todo list
-	  - perl_checker fix
-
-	* standalone/drakfont: bit me!
-
-	* detect_devices.pm: getCPUs() : fix multiples cpu detection
-	  -add cpus detection
-	  - update todo list
-	  - perl_checker fix
-
-	* harddrake/data.pm: display cpu name (eg "Pentium") too in harddrake gui
-	display "$vendor cpu number $id" for cpus in harddrake gui
-	miaouh
-	use code factored in detect_devices for modem detection
-	  -add cpus detection
-	  - update todo list
-	  - perl_checker fix
-
-	* drakxtools.spec: 1.1.10-1mdk
-	buildrequires: libext2fs-devel
-
-	* harddrake/v4l.pm, harddrake/TODO: 
-	  -add cpus detection
-	  - update todo list
-	  - perl_checker fix
-
-2002/10/15  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* detect_devices.pm: add Pioneer to vendors list
-
-	* harddrake/data.pm: display again unknown category (spoted by florent
-	beranger)
-
-2002/10/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: remove initrd images before umounting and exiting.
-
-2002/10/14  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-2002/10/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, install_any.pm: Hide password to browse W2k
-	servers. (Buchan Milne).
-	Domain name to all caps in smb.conf. (Buchan Milne).
-
-	* standalone/drakTermServ: Finish thin client setup option.
-
-2002/10/14  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - fix typos
-	  - when something is eating io bandwith, drakbug is very slow to scroll
-	  the menu, since on each item selection, it does rpm db
-	  access. solution :
-	  o cache rpm result in %packages
-	
-	  o only call rpm & which if nothing is cached
-	
-	  - if there's the selected package isn't installed, just print "package
-	  not installed" (and translate that)
-
-2002/10/12  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Read/Write thin client configuration.
-	Add draktermserv config to enable/disable thin clients.
-	Update documentation.
-
-2002/10/11  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/adsl.pm: fix speedtouch detection
-
-2002/10/11  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ca.po, share/po/pt.po, share/po/DrakX.pot: updated Catalan and
-	Portuguese files
-
-2002/10/11  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Dynamic IP pool for client machines.
-	Don't require image for PCI clients.
-	Perl_checker fixes.
-
-2002/10/10  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/adsl.pm: notify if speedtouch is detected or not
-
-	* network/netconnect.pm: add a warning window for winmodems
-
-	* detect_devices.pm, network/modem.pm: 
-	  - move serial modem detection to detect_devices.pm
-	  - add speedtouch USB detection
-	  - add winmodem detection
-
-2002/10/10  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Correct typo in create boot ISO code
-	Add note in help about optional net boot image entry for PCI cards
-
-2002/10/09  gbeauchesne
-
-	* mdk-stage1/log.c: ISO C standard as to say about va_list on 7.15 [#3]
-	If  access  to  the varying arguments is desired, the called
-	       function shall declare an object (referred to as ap in  this
-	       subclause) having type va_list.  The object ap may be passed
-	       as an argument to another function; if that function invokes
-	       the  va_arg  macro with parameter ap, the value of ap in the
-	       calling function is indeterminate and shall be passed to the
-	       va_end macro prior to any further reference to ap.199)
-	Which interprets to do reuse a va_list that was already processed.
-	Instead, use a copy. This fixes crashes on x86-64 and debugging
-	feasible, since logging is now available. ;-)
-
-	* mdk-stage1/minilibc.h, mdk-stage1/minilibc.c: Add support for x86-64 to
-	minilibc. But we don't really use it yet, as glibc
-	requirements for stage1 undoubtedly make images already bigger. So let
-	have
-	glibc init there too. ;-)
-
-	* bootloader.pm: I surely don't want nor expect grub and loadlin to work
-	on x86-64.
-
-	* share/list.x86_64: Update list for perl mods and XF86 4.2.1 support
-
-	* tools/aewm-drakx/misc.c: Apply FredL change from HEAD
-
-	* mdk-stage1/disk.c: Use standard memset() instead of BSD-ish bzero().
-
-	* mdk-stage1/Makefile, mdk-stage1/Makefile.common: Add x86-64, use glibc
-	in init and stage1 as dietlibc is not working enough
-	and minilibc for init doesn't seem to let umounting take place at the
-	end
-	of installation.
-
-	* fs.pm: SYS_umount does not exist on modern kernels and architectures
-	like x86-64 :)
-
-	* mdk-stage1/rescue-gui.c: lib64 support
-
-	* tools/aewm-drakx/client.c: Fix get/set_wm_state(), we have to get the
-	same data (size) that was set.
-
-	* mdk-stage1/init.c: Add support for lib64 architectures (x86-64, ppc64,
-	etc.). Aka native
-	libraries are in */lib64 there.
-
-	* install_any.pm: Let's try a real bash prior to defaulting to perl'ish
-	/bin/sh?
-
-	* Xconfig/card.pm: Default to XF4 on x86-64 too
-
-	* install_steps_gtk.pm: Yeah, stuck with XFree86 4.X server on x86-64 too.
-
-	* partition_table.pm: Supported journalised FS on x86-64 are ReiserFS and
-	ext3fs for now. Though,
-	I haven't tested reiserfs and don't expect it to work before next kernel
-	update.
-
-	* mdk-stage1/insmod-modutils/util/sys_oim.c,
-	mdk-stage1/insmod-modutils/obj/obj_common.c,
-	mdk-stage1/insmod-modutils/include/obj.h,
-	mdk-stage1/insmod-modutils/util/xsystem.c,
-	mdk-stage1/insmod-modutils/include/util.h,
-	mdk-stage1/insmod-modutils/include/version.h,
-	mdk-stage1/insmod-modutils/util/sys_cm.c,
-	mdk-stage1/insmod-modutils/obj/obj_s390.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc64.h,
-	mdk-stage1/insmod-modutils/include/elf_ppc.h,
-	mdk-stage1/insmod-modutils/insmod.c,
-	mdk-stage1/insmod-modutils/include/kallsyms.h,
-	mdk-stage1/insmod-modutils/include/elf_arm.h,
-	mdk-stage1/insmod-modutils/include/module.h,
-	mdk-stage1/insmod-modutils/util/xmalloc.c,
-	mdk-stage1/insmod-modutils/util/snap_shot.c,
-	mdk-stage1/insmod-modutils/include/kerneld.h,
-	mdk-stage1/insmod-modutils/util/sys_qm.c,
-	mdk-stage1/insmod-modutils/obj/obj_load.c,
-	mdk-stage1/insmod-modutils/obj/obj_alpha.c,
-	mdk-stage1/insmod-modutils/obj/obj_x86_64.c,
-	mdk-stage1/insmod-modutils/include/config.h,
-	mdk-stage1/insmod-modutils/Makefile,
-	mdk-stage1/insmod-modutils/obj/obj_gpl_license.c,
-	mdk-stage1/insmod-modutils/obj/obj_i386.c,
-	mdk-stage1/insmod-modutils/obj/obj_mips.c,
-	mdk-stage1/insmod-modutils/include/elf_alpha.h,
-	mdk-stage1/insmod-modutils/include/elf_s390.h,
-	mdk-stage1/insmod-modutils/util/config.c,
-	mdk-stage1/insmod-modutils/util/sys_dm.c,
-	mdk-stage1/insmod-modutils/include/elf_x86_64.h,
-	mdk-stage1/insmod-modutils/include/elf_m68k.h,
-	mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
-	mdk-stage1/insmod-modutils/include/elf_i386.h,
-	mdk-stage1/insmod-modutils/util/xstrcat.c,
-	mdk-stage1/insmod-modutils/obj/obj_arm.c,
-	mdk-stage1/insmod-modutils/obj/obj_m68k.c,
-	mdk-stage1/insmod-modutils/util/sys_nim.c,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
-	mdk-stage1/insmod-modutils/util/arch64.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa.c,
-	mdk-stage1/insmod-modutils/util/sys_gks.c,
-	mdk-stage1/insmod-modutils/include/elf_mips.h,
-	mdk-stage1/insmod-modutils/util/logger.c,
-	mdk-stage1/insmod-modutils/obj/obj_ppc.c,
-	mdk-stage1/insmod-modutils/util/xrealloc.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc.c,
-	mdk-stage1/insmod-modutils/util/alias.h,
-	mdk-stage1/insmod-modutils/util/xstrdup.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc.h,
-	mdk-stage1/insmod-modutils/obj/obj_ia64.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
-	mdk-stage1/insmod-modutils/obj/obj_reloc.c: Update to modutils 2.4.19
-	with x86-64 support and other fixes
-
-	* mdk-stage1/frontend.h, mdk-stage1/stdio-frontend.c: Hint compiler about
-	unused arguments and don't make it yell in that case. As,
-	we do use -Werror along with -Wall stuff.
-
-	* mdk-stage1/init-libc-headers.h: <sys/ioctl.h> is needed
-
-	* install_gtk.pm: Somehow, "recent" DrakX changes mutated driver into
-	Driver and card->type
-	into card->BoardName
-
-	* printerdrake.pm, any.pm: lib64 fixes
-
-	* proxy.pm: wgetrc is in /etc not /usr/lib
-
-2002/10/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: don't use ugtk directly
-
-2002/10/08  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* tools/aewm-drakx/misc.c: removed client removal
-
-2002/10/04  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: updated Romanian file
-
-2002/10/02  alus
-
-	* share/po/pl.po: some changes
-
-2002/10/02  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* patch/patch-oem-9.0.pl, patch/rpmsrate.oem-9.0-staroffice,
-	patch/rpmsrate.oem-9.0-openoffice: patch necessary for oem to work
-	nicely and the two rpmsrate that allow
-	CD of 700MB to be used.
-
-2002/10/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: try to fix my fix for blank
-
-	* modules.pm: try to fix my fix for blank
-	try to make the install work in "blank" mode (aka fix pixel
-	sucked when changed modules.pm code, not handling blank mode)
-
-	* mdk-stage1/Makefile: cooker
-
-	* mdk-stage1/stage1.c: do not detect/configure pcmcia stuff when "noauto"
-	param
-
-2002/10/02  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* patch/patch-nforce.pl: update from oem patch
-	fix nforce (from francois oem patch)
-
-	* docs/9.0_errata.txt: miaou
-	i810 crash when using XRender on vt switch (see fredc for further
-	information) (fixed in cvs & rh's xfree86)
-	kernel : snd-via686 is said to produce white noise; add workaround
-	nforce audio bug
-	drakconf bug has been workarounded
-
-2002/10/01  dam's  <dams@idm.fr>
-
-	* ugtk.pm: forking ugtk, sorry guys. reverted last patch
-	cleaned, readded needed hack, removed mdk specific functions, added
-	libconf GUI, WARNING, create_dialog API changed
-
-	* my_gtk.pm: mdk icon_path are added here
-
-2002/10/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed oem images management not working at all!
-
-2002/10/01  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* docs/9.0_errata.txt: add 3 bugs:
-	  - drakfont: stat64 syscall blocks drakfont on ntfs partitions
-	  - XFree86: X can corrupt sound when overusing pci bus
-	(PciRetry fix it)
-	  - some people reports stops on reboot on "illegal seek" (having /usr
-	  and / on the same fs "fix" it)
-
-	* drakxtools.spec: harddrake-ui doesn't need the same obsoletes/provides
-	as harddrake,
-	else we may require harddrake-ui on update (thus XFree86 ...)
-
-2002/09/30  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* docs/9.0_errata.txt: 
-	  - first draft for all bugs/glitches/inconsistencies in 9.0. Developers
-	are welcomed to fill it, read it and fix.
-
-2002/09/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added possible fix for noauto: flag of hdlist not
-	generating good list file.
-
-2002/09/30  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/id.po, share/po/ro.po: Updated Romanian and Indonesian files
-
-2002/09/30  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: drop "notail" when filesystem is not reiserfs
-
-2002/09/30  Till Kamppeter  <till@mandrakesoft.com>
-
-	* docs/9.0_errata.txt: "Best Grayscale" on HP DJ 6xx/Apollo.
-	Several bugs found.
-
-2002/09/28  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Latvian file; corrected Danish file
-	corrected encoding
-
-	* share/po/lv.po: updated Latvian file; corrected Danish file
-
-2002/09/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/README: refine info on blank.img
-
-2002/09/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* network/network.pm: workaround situation when /etc/resolv.conf is an
-	absolute link to /etc/ppp/resolv.conf or whatever
-
-	* mdk-stage1/dhcp.c, mdk-stage1/network.c: try to not save the hostname
-	answered by the dhcp server
-
-2002/09/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: log install class selection
-
-2002/09/25  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-	* share/po/tr.po, share/po/cs.po: updated Turkish and Czech files
-
-2002/09/25  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: do not allow to create user "root" (thanks to Eric Fernandez)
-
-2002/09/25  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/sound.pm: handle nvaudio too
-
-2002/09/24  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* any.pm: change load_category__prompt_for_more dying 'already displayed'
-	in return
-
-	* network/ethernet.pm: Fix configureNetwork to fit with new
-	any::load_category_prompt_for_more behavior
-
-2002/09/24  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po, share/po/pt.po: updated Chinese and Portuguese files
-
-2002/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* raid.pm: also create a raidtab if it doesn't exist (occurs when / has
-	been formatted)
-
-	* detect_devices.pm: fix raidAutoStartRaidtab crushing /etc/raidtab
-
-	* patch/patch-raidtab.pl: also create a raidtab if it doesn't exist
-	(occurs when / has been formatted)
-	fix raidAutoStartRaidtab crushing /etc/raidtab
-
-2002/09/24  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm: dams fix enable to get rid of the infamous ugly gtk timeout
-	from dams:
-	remove his ugly hack for mcc which altered the
-	scrolledwindow's "bordure" to hide it.
-	this used to be done through a gtk timer (hance
-	the ugly flash on first display of notebook pages)
-	now createScrolledWindow take a new optional argument
-	that enable to hide the border the right way
-	thanks dams
-	fix expansion of widgets
-	(eg see draksound help window behaviour on resizing)
-
-	* harddrake/TODO, harddrake/data.pm: move usb video devices to webcam
-	category
-
-	* security/main.pm: remember to factorize this with rpmdrake's wait
-	messages in my_gtk
-	remove "bogus periodic check 2" from periodic checks page
-	let simplify
-
-	* harddrake/ui.pm: add a few comments
-	split harddrake part that configure a module into modules::interactive
-	split devices listing ("detection") part into its own function
-	(detect) for readability
-
-	* Makefile.config, modules/interactive.pm: split harddrake part that
-	configure a module into modules::interactive
-
-	* security/msec.pm: ignore_list is useless
-
-	* share/po/br.po: update
-
-2002/09/23  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: fix NULL Gateway IP checking
-
-2002/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: tellAboutProprietaryModules: use formatAlaTeX
-
-	* rescue/devices.pl: add st devices
-
-2002/09/23  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/ru.po: updated Russian file
-
-	* share/po/id.po, share/po/zh_CN.po, share/po/pt.po: updated Indonesian,
-	Portuguese and Chinese files
-
-	* keyboard.pm: Made Lithuanian numeric row keyboard bi-mode
-
-2002/09/23  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: Really fix daemon mode issue.
-	Fix daemon mode bug.
-
-2002/09/23  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: move vim-enhanced in X 4
-	fix nforce version
-
-2002/09/22  alus
-
-	* share/po/pl.po: No... Changes few days before release...
-
-2002/09/22  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/cy.po, share/po/id.po, share/po/lv.po, share/po/vi.po,
-	share/po/sk.po, share/po/ru.po, share/po/hu.po: updated Welsh,
-	Hungarian, Indonesian, Latvian, Russian, Slovak and Vietnamese
-
-2002/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix url
-
-2002/09/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: add a small sentence to the license in
-	order to solve a negociation with
-	Thomson about the MP3 patents.
-
-2002/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix url
-
-2002/09/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: add a small sentence to the license in
-	order to solve a negociation with
-	Thomson about the MP3 patents.
-
-2002/09/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: add a small sentence to the license in
-	order to solve a negociation with
-	Thomson about the MP3 patents.
-
-2002/09/21  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Correct help notes on \$\$IP=IP-ADDRESS\$\$.
-
-2002/09/21  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: final
-
-2002/09/20  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po: updated Chinese file
-
-2002/09/20  Till Kamppeter  <till@mandrakesoft.com>
-
-	* network/shorewall.pm: The LPD/LPRng port is 515, not 5015.
-
-2002/09/20  florin
-
-	* standalone/drakgw: fix the disable function
-
-	* network/shorewall.pm: add the 5015 port for some printers in
-	internal_ports
-
-2002/09/20  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file
-
-	* standalone/drakgw: removed unneeded '\t' in translatable text
-
-	* share/po/zh_CN.po: updated Chinese file
-	updated pot file
-
-2002/09/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: 53mdk
-	52mdk
-	51mdk
-
-	* harddrake/ui.pm: don't print logs in console
-
-	* standalone/drakbug: fixes:
-	  - don't create bogus 1 file (deush: s/2>1&/2>&1/)
-	  - don't print error messages when which cannot find the program
-
-	* harddrake/TODO: update
-
-	* standalone/harddrake2: don't print useless warnings in console
-
-	* standalone/drakxtv: no -w
-
-2002/09/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Catch non-existant config files on copy.
-
-2002/09/19  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of printerdrake installing LPRng when it is
-	started for the
-	first time and CUPS is already installed without local queues but with
-	remote CUPS servers broadcasting in their printer info.
-
-2002/09/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: try to avoid infinite loop on error to install package.
-
-2002/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix titisucks making cards choice in bttv
-	dialog unavailable
-
-2002/09/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: prefer cups for lpddaemon
-
-2002/09/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Catch non-existant config files on copy.
-
-2002/09/19  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of printerdrake installing LPRng when it is
-	started for the
-	first time and CUPS is already installed without local queues but with
-	remote CUPS servers broadcasting in their printer info.
-
-2002/09/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: try to avoid infinite loop on error to install package.
-
-2002/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone.pm: when in install mode, log when a **** does a "use
-	standalone"
-
-	* interactive.pm: require log will reliably fail, use require 'log.pm'
-	instead
-
-	* install_steps_interactive.pm: fix titisucks making cards choice in bttv
-	dialog unavailable
-
-	* install2.pm: revert
-
-2002/09/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm: catch error in Done (mainly "reboot needed"),
-	so that fstab can be written
-	even if reboot needed (useful when removing partitions mounted by
-	default)
-
-	* install_steps.pm: 
-	  - do not set type to ext2 when the type is ntfs
-	  - set to ext3 instead of ext2
-
-2002/09/19  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - s/rpm/mdk/ in package version matching
-
-2002/09/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: avoid proposing ntfs partition to be
-	formatted.
-
-2002/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* network/tools.pm: fix spurious ";" before closing block
-
-	* standalone.pm: when in install mode, log when a **** does a "use
-	standalone"
-
-	* interactive.pm: require log will reliably fail, use require 'log.pm'
-	instead
-
-	* install_steps_interactive.pm: fix titisucks making cards choice in bttv
-	dialog unavailable
-
-	* install2.pm: revert
-	try to workaround strange situations when mkinitrd fail because
-	loop is not loaded (we don't know who calls mkinitrd), by loading
-	the loop module right after format-mount'ing the partitions
-
-2002/09/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm: catch error in Done (mainly "reboot needed"),
-	so that fstab can be written
-	even if reboot needed (useful when removing partitions mounted by
-	default)
-
-	* install_steps.pm: 
-	  - do not set type to ext2 when the type is ntfs
-	  - set to ext3 instead of ext2
-
-2002/09/19  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/v4l.pm: don't use standalone while installing
-
-	* security/libsafe.pm: s/package draksec::libsafe/package
-	security::libsafe/
-	anyway nobody uses that one
-
-2002/09/19  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: remove old WIZARDS package
-	add drakwizard
-	remove LPRng
-
-2002/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: 
-	  - add ntfs in isOtherAvailableFS
-	  - but ensure it is not in isMountableRW
-
-2002/09/18  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: remove *-mdk-cdcom
-
-2002/09/18  florin
-
-	* standalone/drakgw: more details for the dhcp server
-
-	* network/shorewall.pm: remove forgotten debug hash printings
-
-2002/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: 
-	  - add ntfs in isOtherAvailableFS
-	  - but ensure it is not in isMountableRW
-
-2002/09/18  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* security/msec.pm: 
-	  - factorize @sec_levels and %sec_levels for get_default() and
-	get_seclevel_list()
-	  - use them in get_default()
-	  - get_value() : don't assume a space between "function_name" and
-	  "(parameters)"
-	remove brackets on function values loading
-	respect msec syntax
-	"kill quart of draksec code" patch aka make it really working aka "happy
-	fred" :
-	  - security::msec :
-	  o consolidate get_function_value() and get_value into get_value()
-	  o really apply changes, aka save them :
-	    * config_check() : use substInFile and setVarsInSh
-	    * config_function() : use substInFile and append_to_file
-	    * kill stupid and bogus config_option()
-	  o don't overwrite previous changes, aka reread them :
-	    * fix checks and functions current value loading
-	    * fix checks and functions default loading
-	
-	  - security::main :
-	  o simplify ui creation, make it more readable
-	  o kill offuscating basic_secadmin_check(), basic_secadmin_entry(),
-	    network_generate_page(), system_generate_page() and
-	checks_generate_page()
-	  o increase default height because of stupid "add_with_viewport" in
-	    ugtk::createScrolledWindow
-	  o consolidate network and system functions managment, they're all the
-	same for
-	    msec, splitting is only a draksec "feature";  all go in
-	%options_values
-	
-	  - draksec :
-	  o let standalone module configure standalone mode
-	  o security::main already take care of initializing gtk
-	  o security::main already take care of exiting
-	  o don't play with embedded mode special variables
-	
-	it overall looks better but big cleanups're still possible for mdk9.1
-
-	* standalone/draksec: "kill quart of draksec code" patch aka make it
-	really working aka "happy fred" :
-	  - security::msec :
-	  o consolidate get_function_value() and get_value into get_value()
-	  o really apply changes, aka save them :
-	    * config_check() : use substInFile and setVarsInSh
-	    * config_function() : use substInFile and append_to_file
-	    * kill stupid and bogus config_option()
-	  o don't overwrite previous changes, aka reread them :
-	    * fix checks and functions current value loading
-	    * fix checks and functions default loading
-	  - security::main :
-	  o simplify ui creation, make it more readable
-	  o kill offuscating basic_secadmin_check(), basic_secadmin_entry(),
-	    network_generate_page(), system_generate_page() and
-	checks_generate_page()
-	  o increase default height because of stupid "add_with_viewport" in
-	    ugtk::createScrolledWindow
-	  o consolidate network and system functions managment, they're all the
-	same for
-	    msec, splitting is only a draksec "feature";  all go in
-	%options_values
-	
-	  - draksec :
-	  o let standalone module configure standalone mode
-	  o security::main already take care of initializing gtk
-	  o security::main already take care of exiting
-	  o don't play with embedded mode special variables
-	
-	it overall looks better but big cleanups're still possible for mdk9.1
-
-	* security/main.pm: fix wait_message doesn't display
-	run msec after setting changes
-	"kill quart of draksec code" patch aka make it really working aka "happy
-	fred" :
-	  - security::msec :
-	  o consolidate get_function_value() and get_value into get_value()
-	  o really apply changes, aka save them :
-	    * config_check() : use substInFile and setVarsInSh
-	    * config_function() : use substInFile and append_to_file
-	    * kill stupid and bogus config_option()
-	  o don't overwrite previous changes, aka reread them :
-	    * fix checks and functions current value loading
-	    * fix checks and functions default loading
-	  - security::main :
-	  o simplify ui creation, make it more readable
-	  o kill offuscating basic_secadmin_check(), basic_secadmin_entry(),
-	    network_generate_page(), system_generate_page() and
-	checks_generate_page()
-	  o increase default height because of stupid "add_with_viewport" in
-	    ugtk::createScrolledWindow
-	  o consolidate network and system functions managment, they're all the
-	same for
-	    msec, splitting is only a draksec "feature";  all go in
-	%options_values
-	
-	  - draksec :
-	  o let standalone module configure standalone mode
-	  o security::main already take care of initializing gtk
-	  o security::main already take care of exiting
-	  o don't play with embedded mode special variables
-	
-	it overall looks better but big cleanups're still possible for mdk9.1
-
-2002/09/17  David Baudens  <baudens@mandrakesoft.com>
-
-	* share/advertising/04-multimedia.png: Use the right image
-
-2002/09/17  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - sync option names with server's name.
-	  - fix typo
-	  - back to normal http connection (instead of https)
-	  - relocated web wizard
-
-2002/09/17  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/po/fr.po: corrected typo
-
-2002/09/17  florin
-
-	* network/shorewall.pm: small updates
-
-	* network/drakfirewall.pm: add a silly message
-
-	* standalone/drakgw: add warning message
-	add the nameserver IP variable in advanced mode
-
-2002/09/17  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/nl.po, share/po/sk.po: updated Dutch and Slovak files
-
-	* share/po/tr.po: updated Turkish file
-
-2002/09/17  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: fix draksec typo
-
-	* drakxtools.spec: 50mdk for lord fredl
-
-	* security/msec.pm: 
-	  - security::msec :
-	o config_check: use MDK::Common to set option rather
-	    than overwriting config file
-	  o remove all stupid prefix that just ofuscate code
-	    whereas it's always set to  '',
-	    $::prefix will be a lot better
-	  o s/shift @_/shift/
-	  o kill config_option()
-	  o simplify get_default()
-	  o get_secure_level() : replace if cascade by an array
-	  o set_secure_level() :
-	    * replace if cascade by an hash
-	    * default to runlevel 3 if undefined
-	  o get_functions() : simplify by merging code paths
-	  - security::main :
-	  o security::libsafe is unneeded
-	  o don't pass useless prefix
-	  o begin to read default values
-	  - msec::config_check: use MDK::Common to set option rather
-	  than overwriting config file
-	  - remove all stupid prefix that just ofuscate code
-	  whereas it's always set to  '',
-	  $::prefix will be a lot better
-	  - security::main: kill duplicated 'use strict'
-	  - no ignore choice for periodic checks
-	  - save functions in /etc/security/msec/level.local
-	  and not security.conf
-	  - "from mseclib import" is useless
-	  - fix functions saving (an object method invocation
-	  takes class name as argument)
-	remove libsafe option (not anymore used by msec)
-
-	* security/main.pm: 
-	  - security::msec :
-	o config_check: use MDK::Common to set option rather
-	    than overwriting config file
-	  o remove all stupid prefix that just ofuscate code
-	    whereas it's always set to  '',
-	    $::prefix will be a lot better
-	  o s/shift @_/shift/
-	  o kill config_option()
-	  o simplify get_default()
-	  o get_secure_level() : replace if cascade by an array
-	  o set_secure_level() :
-	    * replace if cascade by an hash
-	    * default to runlevel 3 if undefined
-	  o get_functions() : simplify by merging code paths
-	  - security::main :
-	  o security::libsafe is unneeded
-	  o don't pass useless prefix
-	  o begin to read default values
-	  - msec::config_check: use MDK::Common to set option rather
-	  than overwriting config file
-	  - remove all stupid prefix that just ofuscate code
-	  whereas it's always set to  '',
-	  $::prefix will be a lot better
-	  - security::main: kill duplicated 'use strict'
-	  - no ignore choice for periodic checks
-	  - save functions in /etc/security/msec/level.local
-	  and not security.conf
-	  - "from mseclib import" is useless
-	  - fix functions saving (an object method invocation
-	  takes class name as argument)
-	add ignore option to msec items
-
-2002/09/17  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: remove !CDCOM flag for OpenOffice.org
-
-2002/09/16  siegel
-
-	* share/po/de.po: updates
-
-2002/09/16  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm, share/po/de.po: Do not try to install "webfetch" during
-	installation.
-
-2002/09/16  Warly  <warly@mandrakesoft.com>
-
-	* drakxtools.spec: 49mdk for new printerdrake code regarding webfetch that
-	breaks during install.
-
-2002/09/16  siegel
-
-	* share/po/de.po: updates
-
-2002/09/16  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm, share/po/de.po: Do not try to install "webfetch" during
-	installation.
-
-2002/09/16  David Baudens  <baudens@mandrakesoft.com>
-
-	* share/advertising/17-mdkclub.pl,
-	share/advertising/15-mdkexpert-corporate.pl,
-	share/advertising/04-multimedia.pl, share/advertising/06-mcc.pl,
-	share/advertising/12-mdkstore.pl: Adapt text postion to fix french
-	translations
-
-2002/09/16  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - typo in options
-
-	* standalone.pm: 
-	  - use basename with drakbug for standalone tools
-
-	* standalone/drakfloppy: 
-	  - translation for drakfloppy
-
-	* standalone/logdrake: 
-	  - enable translation for logdrake
-
-2002/09/16  florin
-
-	* network/shorewall.pm: add internal_ports variable
-
-2002/09/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/XFdrake: fixed no translation for XFdrake (pixel idea).
-
-2002/09/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* my_gtk.pm, drakxtools.spec: fix die wizcancel in non wizard mode
-
-	* rescue/tree/sbin/modprobe: remove modules files even when modprobe fails
-
-2002/09/16  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* bootlook.pm: remove File::Copy dependencies and change lilo message path
-
-2002/09/16  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/zh_CN.po, share/po/pt.po, share/po/lv.po,
-	share/po/sv.po: updated Indonesian, Latvian, Portuguese, Swedish and
-	Chinese files
-
-2002/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: do not allow encrypted filesystem for /boot
-
-2002/09/15  Till Kamppeter  <till@mandrakesoft.com>
-
-	* share/po/de.po: In wizards: "Finish" --> "Assistent beenden"
-
-2002/09/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* my_gtk.pm: workaround ERROR: Can't call method "child" on an undefined
-	value at
-	/usr/lib/libDrakX/my_gtk.pm line 94
-
-	* mdk-stage1/network.c: http: don't add a / between the hostname and the
-	url, apache
-	doesn't understand //~fermigier the same way as /~fermigier
-
-2002/09/14  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-	* share/po/wa.po: corrected typo
-
-	* standalone/logdrake, standalone/drakfloppy: corrected gettext domain
-	(translations are now in libDrakX)
-
-	* share/po/cy.po, share/po/zh_CN.po, share/po/lv.po, share/po/fr.po:
-	updated Welsh, French, Latvian and Chinese files
-
-2002/09/14  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: Made "LPRng" show up in the spooler menu when LPRng is
-	installed.
-
-	* share/po/de.po: Printerdrake translations
-	Printerdrake translations
-	Printerdrake translations
-	Printerdrake translations.
-	Printerdrake translations
-
-2002/09/13  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone.pm: 
-	  - meuh aka launch drakbug when incident is risen
-
-2002/09/13  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/netconnect.pm: 
-	  - fix old conf files name (thx titi)
-
-2002/09/13  florin
-
-	* network/shorewall.pm: more services in drakgw_protocols
-
-2002/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install2: allow devfsd to be restarted after update.
-
-	* install_any.pm: allow live_update to have something configured correctly
-	for urpmi media.
-
-2002/09/13  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: removed
-	obsolete old unused strings, to make the po files lighter
-
-2002/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po: update the help english part (so that no
-	fuzzy occurs)
-
-	* share/rpmsrate: put back kernel-secure
-
-	* install_any.pm: don't write fstab on upgrade (to workaround the fact
-	that many entries are dropped)
-
-	* help.pm, share/po/help-de.pot, share/po/help-it.pot,
-	share/po/help-fr.pot, share/po/help-es.pot: update help from xml
-
-2002/09/13  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: Do not insist on "curl" to download PPDs from a CUPS
-	server (for Star Office/OpenOffice.org/GIMP), take the one from "curl"
-	and "wget" which is there. Install "webfetch" when none is there.
-	Let "cups-drivers" be installed when switching from normal to expert
-	mode.
-	Entries in "auto-detected" field of SMB printer setup mask should not be
-	editable.
-
-	* printer.pm: Do not insist on "curl" to download PPDs from a CUPS server
-	(for Star Office/OpenOffice.org/GIMP), take the one from "curl" and
-	"wget" which is there. Install "webfetch" when none is there.
-	Let "cups-drivers" be installed when switching from normal to expert
-	mode.
-	Added timeouts to network scan with "nmap" so that scan does not take
-	too long when there are machines running a firewall.
-	To find running machines in the network, do not only a broadcast ping
-	but also an "nmblookup" to also catch Windows machines which do not
-	answer to ping.
-
-2002/09/13  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* drakxtools.spec: 
-	  - obsoletes drakfloppy
-
-2002/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install2: allow devfsd to be restarted after update.
-	added modprobe loop before killing devfsd.
-	fixed for newer perl 5.8.0 (vendor_perl directory).
-	fixed to kill devfsd before.
-
-	* install_any.pm: allow live_update to have something configured correctly
-	for urpmi media.
-
-2002/09/13  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/es.po, share/po/zh_TW.po, share/po/da.po, share/po/pt.po,
-	share/po/lv.po, share/po/hu.po: updated Danish, Spanish, Hungarian,
-	Latvian, Portuguese and Chinese files
-
-2002/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/hu.po: update the help english part (so that no
-	fuzzy occurs)
-
-	* share/rpmsrate: put back kernel-secure
-
-	* install_any.pm: don't write fstab on upgrade (to workaround the fact
-	that many entries are dropped)
-
-	* help.pm, share/po/help-de.pot, share/po/help-it.pot,
-	share/po/help-fr.pot, share/po/help-es.pot: update help from xml
-
-2002/09/13  Till Kamppeter  <till@mandrakesoft.com>
-
-	* share/po/de.po: German translations for printerdrake and some
-	corrections.
-
-2002/09/13  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: rc3
-
-2002/09/12  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sk.po: updated slovak file
-
-2002/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, install_any.pm, install2.pm,
-	install_steps_interactive.pm: do something with "Security Administrator
-	(login or email)"
-
-	* share/po/help_xml2pm.pl: 
-	  - discard &shy; (ie \x{ad})
-	  - handle <quote><literal>xxx</literal></quote> specially to not have
-	double
-	double quotes
-
-2002/09/12  siegel
-
-	* share/po/de.po: updates
-
-2002/09/12  alus
-
-	* share/po/pl.po: Updated polish translation
-
-2002/09/12  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/tools.pm, drakxtools.spec, standalone/net_monitor: 
-	  - patch net_monitor
-
-2002/09/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed very stupid typo and inconsistency in
-	allowNVIDIA_rpms.
-
-	* install_steps.pm: added code after install of package to fix broken
-	alternatives.
-
-2002/09/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: meumeuh
-	meuh
-	a fix from florin/pixel to make it work
-
-	* network/shorewall.pm: run_program crazyness
-
-	* drakxtools.spec: meuuuuh meuh meuh ?
-
-2002/09/12  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* bootlook.pm: resize previews pixmap to be nice when embedded
-
-	* share/po/fr.po: modif bootlook.pm translation to keep a good when
-	embedded
-
-2002/09/12  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: Updated Hungarian file
-	updated pot file
-
-	* share/po/sk.po: updated slovak file
-	updated pot file
-
-	* share/po/mt.po, share/po/vi.po: updated Vietnamese and Maltese files
-	updated pot file
-
-	* share/po/tr.po: updated pot file
-	updated turkish file
-
-	* share/po/id.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/ta.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/lv.po: updated pot file
-
-	* share/po/cs.po: updated Czech file
-	updated pot file
-
-	* share/po/ru.po: updated Russian file
-	updated pot file
-
-2002/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, install_any.pm, install2.pm,
-	install_steps_interactive.pm: do something with "Security Administrator
-	(login or email)"
-
-	* share/po/help_xml2pm.pl: 
-	  - discard &shy; (ie \x{ad})
-	  - handle <quote><literal>xxx</literal></quote> specially to not have
-	double
-	double quotes
-
-	* network/shorewall.pm: fix writing twice tcp instead of tcp & udp
-
-2002/09/12  siegel
-
-	* share/po/de.po: updates
-
-2002/09/12  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: When adding a local printer during an expert install
-	without network,
-	printerdrake insists on starting the network and does not enter the
-	add printer procedure.
-	Made the association of model names obtained by auto-detection and of
-	the model names in the printer database much more reliable.
-
-	* detect_devices.pm: Made the association of model names obtained by
-	auto-detection and of
-	the model names in the printer database much more reliable.
-
-2002/09/12  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/logdrake, standalone/drakfloppy: fix logdrake and drakfloppy
-
-	* drakxtools.spec: 45mdk
-
-	* security/main.pm, security/msec.pm: 
-	  - draksec window title is draksec, not "draksec - basic options" since
-	it offer
-	advanced options too now
-	  - mark some strings to be translated (mainly notebook pages titles)
-
-	* share/po/fr.po: update french translation
-
-2002/09/11  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/es.po, share/po/cs.po, share/po/vi.po, share/po/mt.po,
-	share/po/hu.po: updated po files
-
-2002/09/11  alus
-
-	* share/po/pl.po: updated po
-
-2002/09/11  David Baudens  <baudens@mandrakesoft.com>
-
-	* share/advertising/11-mdkstore.pl, share/advertising/07-desktop.pl,
-	share/advertising/10-mnf.pl: Fix typos
-
-	* share/advertising/09-server.pl: Update
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/cs.po,
-	share/po/bg.po, share/po/el.po, share/po/hu.po: Don't break po
-	Update
-
-2002/09/11  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - s/bugzilla.com/drakbug.mandrakesoft.com/
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: 
-	  -s/bugzilla.com/drakbug.mandrakesoft.com/
-
-2002/09/11  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* drakxtools.spec: 
-	  - update spec for 44mdk
-
-2002/09/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed possible problem with NVIDIA packages parsing.
-
-2002/09/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/frontend-common.c: meuh
-	probe for usb stuff in info and error msg also
-
-2002/09/11  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* standalone/draksplash: use do_pkgs for check and install ImageMagick
-
-2002/09/11  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sk.po: updated Slovak file
-	updated pot file
-
-	* share/po/id.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/ga.po,
-	share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/ta.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/lv.po: updated
-	pot file
-
-	* standalone/draksplash: small text for translatators
-
-	* share/po/mt.po, share/po/vi.po, share/po/es.po, share/po/cs.po,
-	share/po/hu.po: updated po files
-	updated pot file
-
-	* share/po/fr.po: updatd French file
-	updated pot file
-
-	* share/po/ru.po: updated Russian file
-	updated pot file
-
-	* network/isdn.pm: corrected i18n usage
-
-2002/09/11  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakupdate_fstab: use flag "kudzu" for entries automatically
-	handled by drakupdate_fstab
-
-	* common.pm: allow various textdomains for i18n
-
-2002/09/11  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: 
-	  - Made printer::assure_device_is_available_for_cups() more reliable by
-	checking and retrying.
-	  - Do not start the network when it is not configured.
-
-2002/09/11  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update french translation
-	s/was the firt sound API/was the first sound API/
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po, share/po/bs.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/it.po, share/po/nl.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/bg.po, share/po/cs.po, share/po/el.po, share/po/lv.po,
-	share/po/hu.po: s/was the firt sound API/was the first sound API/
-
-	* standalone/draksound: 
-	  - fix: we displayed current driver as default one: display the right
-	one
-	  - show a wait message while switching driver
-
-	* harddrake/sound.pm: 
-	  - fix: we displayed current driver as default one: display the right
-	one
-	  - show a wait message while switching driver
-	s/was the firt sound API/was the first sound API/
-
-	* drakxtools.spec: update
-
-2002/09/10  alus
-
-	* share/po/pl.po: Strings one day before deadline????
-	updated translation
-
-2002/09/10  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - definitive link and options
-
-2002/09/10  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/isdn.pm: 
-	  - remove variable from a translated chain
-
-2002/09/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.pm: removed old code no more used.
-
-	* pkgs.pm: consolidate unselectAllPackages.
-
-	* install_steps_interactive.pm: fixed test of chooseCD on nfs (always
-	enabled).
-	avoid removing all packages during upgrade (safe guard).
-
-2002/09/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag version as 9.0
-
-	* rescue/tree/etc/rc.sysinit: don't drvinst SERIAL_USB when noauto (it
-	needs a lspcidrake -v)
-
-	* rescue/drvinst: drvinst <param> is broken when we don't -v
-
-2002/09/10  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* standalone/draksplash: change the preview rendering method
-
-2002/09/10  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po, share/po/fr.po: updated French and Portuguese files
-	updated pot file
-	updated pot file
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/ta.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/cs.po, share/po/bg.po, share/po/lv.po,
-	share/po/hu.po: updated pot file
-	updated pot file
-
-	* security/main.pm: improved i18n handling
-
-	* share/po/vi.po: updated Vietnamese file
-	updated Vietnamese file
-
-	* share/po/nl.po: updated Dutch file
-	updated pot file
-	updated pot file
-
-	* standalone/drakTermServ: small i18n change
-
-2002/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: set mount point for nt partitions by default
-
-	* Xconfig/card.pm: do not prefer_xf3 for "NeoMagic (laptop/notebook)"
-	since:
-	  - long ago it was decided to distrust driver "neomagic" together with
-	Riva's, SiS, GeForce
-	  - in 09/2001 (XFree 4.1.0), it was decided to keep distrusting driver
-	"neomagic"
-	  - Cosmic Flo says driver "neomagic" works (on card Neomagic
-	Corporation|[MagicGraph 256AV])
-
-	* fs.pm: 
-	  - have ntfs "ro" by default
-	  - "umask=0" is a special option for ntfs
-
-2002/09/10  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Display issues in other locales.
-
-2002/09/10  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/sound.pm: description update
-	fix OSS definition
-
-	* share/po/fr.po: next updates batch
-	update french translation
-
-2002/09/10  alus
-
-	* share/po/pl.po: updated translation
-
-2002/09/10  David Baudens  <baudens@mandrakesoft.com>
-
-	* share/po/fr.po: Update
-
-2002/09/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.pm: removed old code no more used.
-
-	* mouse.pm: fixed pixel typo (strange, I was sure it was titi but not ?).
-
-	* pkgs.pm: consolidate unselectAllPackages.
-
-	* install_steps_interactive.pm: fixed test of chooseCD on nfs (always
-	enabled).
-	avoid removing all packages during upgrade (safe guard).
-
-2002/09/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag version as 9.0
-
-	* rescue/tree/etc/rc.sysinit: don't drvinst SERIAL_USB when noauto (it
-	needs a lspcidrake -v)
-
-	* rescue/drvinst: drvinst <param> is broken when we don't -v
-
-2002/09/10  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po,
-	share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/ro.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/ta.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/bg.po, share/po/lv.po,
-	share/po/hu.po: updated pot file
-
-	* share/po/ru.po, share/po/pt.po, share/po/cs.po: updated pot file
-	updated Czech, Russian and Portuguese files
-
-	* security/main.pm: improved i18n handling
-
-	* standalone/drakTermServ: small i18n change
-
-2002/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: set mount point for nt partitions by default
-
-	* fs.pm: 
-	  - have ntfs "ro" by default
-	  - "umask=0" is a special option for ntfs
-
-2002/09/10  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Display issues in other locales.
-
-2002/09/10  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* security/libsafe.pm, standalone/draksec: move back draksec's files in
-	drakxtools
-
-	* drakxtools.spec: move back draksec to drakxtools
-
-	* Makefile.config: move back draksec's files in drakxtools
-	move back draksec to drakxtools
-
-	* security/main.pm, security/msec.pm: inline seclevel_explain (why using
-	functions to return a text label ?)
-	move back draksec's files in drakxtools
-
-2002/09/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: fixed pixel typo (strange, I was sure it was titi but not ?).
-
-2002/09/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: fixed pixel typo (strange, I was sure it was titi but not ?).
-
-2002/09/10  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/eu.po, share/po/sk.po: updated Basque and Slovak files
-
-2002/09/09  dam's  <dams@idm.fr>
-
-	* ugtk.pm: corrected typo (modification of constant if ugtk.pm was a
-	string)
-
-2002/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm: have the IMPS/2 warning "MOVE YOUR WHEEL" for ExplorerPS/2 too
-
-	* Xconfig/card.pm: have BusID's on MULTI_HEAD, otherwise G450 & G550 go
-	crazy
-
-2002/09/09  David Baudens  <baudens@mandrakesoft.com>
-
-	* share/po/fr.po: Update
-	Update
-	Fix typos and bad french translations
-	Update
-
-	* share/advertising/14-mdkexpert.pl, share/advertising/03-internet.pl: Fix
-	typos
-
-2002/09/09  dam's  <dams@idm.fr>
-
-	* ugtk.pm: corrected typo (modification of constant if ugtk.pm was a
-	string)
-
-2002/09/09  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/ethernet.pm: 
-	  - check DNS & Gateway IP
-
-	* network/network.pm: 
-	  - show pcmcia ethernet cards in list
-
-	* modules.pm: 
-	  - change "=~ /isdn/" in "eq 'network/isdn'"
-
-2002/09/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fix urpmi installation.
-	fixed still present hdlist and synthesis file for media not configured
-	(because
-	of not selected).
-
-2002/09/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* my_gtk.pm: gfx specs is to have the text justified on the left
-
-	* share/po/fi.po: a fix from cooker
-
-2002/09/09  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot: updated pot file
-
-	* share/po/fr.po: updated po files
-	updated pot file
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/lv.po, share/po/hu.po: updated po files
-
-2002/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk.pm, Xconfig/test.pm, install2.pm: 
-	  - use variable $::no_ugtk_init in ugtk.pm instead of using
-	$::isInstall
-	  - that way, the X test can be made to work both at install and
-	standalone
-
-	* standalone/drakupdate_fstab: force non-supermount, supermount is too
-	buggy
-
-	* mouse.pm: have the IMPS/2 warning "MOVE YOUR WHEEL" for ExplorerPS/2 too
-
-	* Xconfig/card.pm: have BusID's on MULTI_HEAD, otherwise G450 & G550 go
-	crazy
-
-	* any.pm: when "password" or "restricted" is set, propose the entries to
-	change them
-	(thanks to Aleksander Adamowski)
-	fix detection of mixed_kind_of_disks (eg: hde with hda)
-
-	* standalone/fileshareset: add "sync" to nfs exports default_options (so
-	that exportfs doesn't warn a lot of stuff)
-
-2002/09/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: enforce unique ids
-	add drakbug report entry in help menu
-
-	* drakxtools.spec: fix confirm script
-	require perl-GTK-Gdkpixbuf for bootlook
-
-	* harddrake/TODO: update
-
-2002/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* ugtk.pm, Xconfig/test.pm, install2.pm: 
-	  - use variable $::no_ugtk_init in ugtk.pm instead of using
-	$::isInstall
-	  - that way, the X test can be made to work both at install and
-	standalone
-
-	* standalone/drakupdate_fstab: force non-supermount, supermount is too
-	buggy
-
-	* any.pm: fix detection of mixed_kind_of_disks (eg: hde with hda)
-
-2002/09/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: enforce unique ids
-	add drakbug report entry in help menu
-
-	* standalone/service_harddrake: don't detect same removed/added when
-	upgrading from previous releases
-	  - harddrake:
-	o don't pollute sbin namespace with one shot scripts
-	  o add run wrapper script for harddrake service
-	  o disable ?dm part
-	  o timeout configurator offer to 5 seconds
-
-	* ugtk.pm, bootlook.pm, standalone/logdrake, standalone/drakfloppy: 
-	  - drakfloppy / logdrake: destroy_window and create_dialog were
-	gratuitously duplicated;   move them in ugtk
-	  - drakfloppy / logdrake / bootlook.pm: get_main_menu was
-	  gratuitously duplicated;
-	  common code which was moved from harddrake::ui to
-	  ugtk::create_factory_menu just do the job
-
-	* drakxtools.spec: 
-	  - harddrake:
-	o don't pollute sbin namespace with one shot scripts
-	  o add run wrapper script for harddrake service
-	  o disable ?dm part
-	  o timeout configurator offer to 5 seconds
-
-2002/09/09  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: remove harddrake
-
-2002/09/08  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: 
-	  - s/occurance/occurence.
-
-	* install_steps_interactive.pm: 
-	  - s/occurance/occurence in license.txt (thx qqun)
-
-2002/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/various.pm, Xconfig/proprietary.pm: replace a few more 4.2.0
-	with 4.2.1
-
-	* install_interactive.pm: warn "You don't have a swap
-	partition.\n\nContinue anyway?" in expert mode
-
-	* Xconfig/card.pm: replace 4.2.0 with 4.2.1
-
-2002/09/07  dam's  <dams@idm.fr>
-
-	* standalone/drakbackup: don't display the banner id in embedded mode
-
-2002/09/07  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/draksplash: 
-	  - use standalone for explanations and center dialog
-
-	* drakxtools.spec: 
-	  - cvs up before packaging (fix messy drakboot conf).
-
-2002/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix log
-
-	* share/rpmsrate: don't install kernel-secure on HIGH_SECURITY since
-	kernel-secure is broken
-
-2002/09/06  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/isdn.pm: 
-	  - fix typo
-	  - add new screen for ISND detected device. Still have to get back in
-	Expert mode to choose by hand.
-
-	* modules.pm: 
-	  - Fix isdn card detection
-
-2002/09/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/service_harddrake, drakxtools.spec, harddrake/ui.pm,
-	harddrake/data.pm: 
-	  - harddrake::data : consolidate common code in custom_id()
-	  - do some detection in dm stage
-	  - fix bad test
-	  - display better name
-
-2002/09/06  David Baudens  <baudens@mandrakesoft.com>
-
-	* standalone/icons/hori.png: Re-add old obsolete Aurora image requires by
-	drakboot (can someone explain why? It is stupid)
-	Update icons & remove old Aurora stuff
-
-	* standalone/icons/gmon.png, standalone/icons/categ.png,
-	standalone/icons/verti.png: Re-add completly obsolote Aurora's images
-	needed for drakboot (really, but really stupid requires)
-	Update icons & remove old Aurora stuff
-
-	* standalone/icons/ic82-tape-40.png, standalone/icons/ic-drakfont-48.png,
-	standalone/icons/mdk_logo.png, standalone/icons/ic82-when-40.png,
-	standalone/icons/ic82-moreoption-40.png,
-	standalone/icons/ic82-system-40.png,
-	standalone/icons/ic82-dossier-32.png, standalone/icons/ic82-CD-40.png,
-	standalone/icons/ic82-back-up-32.png,
-	standalone/icons/ic82-where-40.png,
-	standalone/icons/ic82-back-up-16.png,
-	standalone/icons/ic82-network-40.png,
-	standalone/icons/ic82-back-up-48.png,
-	standalone/icons/ic82-discdurwhat-40.png,
-	standalone/icons/ic82-systemeplus-40.png,
-	standalone/icons/ic82-users-40.png, standalone/icons/ic82-others-40.png:
-	Update
-
-	* drakxtools.spec: Update
-	Update
-	Update
-
-2002/09/06  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* my_gtk.pm: 
-	  - fix wizard title and pixmap overlap
-
-2002/09/06  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/isdn.pm: 
-	  - fix typo
-	  - add new screen for ISND detected device. Still have to get back in
-	Expert mode to choose by hand.
-
-	* modules.pm: 
-	  - Fix isdn card detection
-
-2002/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to allow changing boot medium.
-
-2002/09/06  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* bootlook.pm: comment old code concerning aurora
-
-2002/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm: during install, don't probe PS/2 mice when a serial mouse is
-	already found.
-	(otherwise if a PS/2 keyboard is present, a PS/2 is found even if
-	absent, and
-	configuring an auxmouse PS/2 causes the PS/2 keyboard to freeze)
-	(thanks to Nora Etukudo)
-
-	* bootloader.pm (read): cleanup duplicate labels (in case file is
-	corrupted)
-	(get_label): compare labels using 15 first characters (to be compliant
-	with lilo)
-	(add_entry): fix removing duplicate entries
-	(read): fix
-
-2002/09/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakTermServ: QA BugSummer90 fixes
-
-2002/09/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/sound.pm: killing debugging prints
-	  - blacklist cs46xx and cs4281 drivers : we won't unload these drivers
-	since they're know to oopses the kernel but just warn the user
-	  - add rooted(), unload() and load() wrapper to check wheter we're in
-	  drakx or in standalone mode
-	  - workaround alsaconf's aliases
-	  - add an help button that describe ALSA and OSS
-	  - display current driver, its type (OSS or ALSA), and the default
-	  driver for the card
-
-	* harddrake/data.pm, harddrake/ui.pm: 
-	  - harddrake::data : consolidate common code in custom_id()
-	  - do some detection in dm stage
-	  - fix bad test
-	  - display better name
-	  - don't list usb mouses as unknown hw
-	  - fix mouse detection (mouse::detect() needed
-	modules::mergein_conf('/etc/modules.conf') first
-	  - don't skip mouse in --test mode
-
-	* standalone/draksound: if there's no sound card, add a note about
-	sndconfig
-
-	* standalone/service_harddrake: 
-	  - harddrake::data : consolidate common code in custom_id()
-	  - do some detection in dm stage
-	  - fix bad test
-	  - display better name
-
-	* standalone/harddrake2: 
-	  - document --test
-	  - mark usage as translatable
-
-	* share/po/fr.po: update french translation
-
-	* harddrake/TODO: update
-
-	* drakxtools.spec: 
-	  - harddrake::data : consolidate common code in custom_id()
-	  - do some detection in dm stage
-	  - fix bad test
-	  - display better name
-	40mdk
-
-2002/09/06  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: add lisa in KDE in REMOTE_ACCESS
-	remove contrib packages
-	add !CDCOM for OpenOffice.org
-	move mod_php to 5
-
-2002/09/06  David Baudens  <baudens@mandrakesoft.com>
-
-	* standalone/icons/ic82-tape-40.png, standalone/icons/ic-drakfont-48.png,
-	standalone/icons/mdk_logo.png, standalone/icons/ic82-when-40.png,
-	standalone/icons/ic82-moreoption-40.png,
-	standalone/icons/ic82-system-40.png,
-	standalone/icons/ic82-dossier-32.png, standalone/icons/ic82-CD-40.png,
-	standalone/icons/ic82-back-up-32.png,
-	standalone/icons/ic82-where-40.png,
-	standalone/icons/ic82-back-up-16.png,
-	standalone/icons/ic82-network-40.png,
-	standalone/icons/ic82-back-up-48.png,
-	standalone/icons/ic82-discdurwhat-40.png,
-	standalone/icons/ic82-systemeplus-40.png,
-	standalone/icons/ic82-users-40.png, standalone/icons/ic82-others-40.png:
-	Update
-
-	* drakxtools.spec: Update
-	Update
-
-	* standalone/icons/gmon.png, standalone/icons/hori.png,
-	standalone/icons/categ.png, standalone/icons/verti.png: Update icons &
-	remove old Aurora stuff
-
-2002/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to allow changing boot medium.
-
-	* install_steps.pm: changed how pkgs::remove is called.
-
-	* pkgs.pm: fixed excesive reduction of size.
-	fixed stupid typo.
-	allow obsoleted packages to be taken into account.
-	allow cleaning ask_remove according to removed package.
-
-2002/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ugtk.pm, my_gtk.pm: add gtkset_visibility
-
-	* drakxtools.spec: fix and change a few things in the description
-
-2002/09/06  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-	* share/po/pt.po, share/po/sk.po: updated Portuguese and Slovak files
-
-2002/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/various.pm, Xconfig/main.pm: ensure Xconfig::various::various is
-	called at install
-
-	* bootloader.pm (read): cleanup duplicate labels (in case file is
-	corrupted)
-	(get_label): compare labels using 15 first characters (to be compliant
-	with lilo)
-	(add_entry): fix removing duplicate entries
-	(read): fix
-
-2002/09/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update french translation
-	s/si vous �tre nouveau/si vous �tes nouveau/
-	s/des actions additionnelle/des actions additionnelles/
-	s/sur le disk/sur le disque/
-	s/vous pouves atteindre les toutes options/vous pouvez modifier toutes
-	les options/
-	Ctrl - C (.... => manque )
-	s/Si vous installer/Si vous installez/
-	s/qui sera utilis�/qui sera utilis�e/ (partition)
-	s/accessible en cas de/des images ��ramdisk�� accessibles/
-	s/Cette installation prends/Cette installation prend/
-	s/Assurez vous/Assurez-vous/
-	fix po
-
-	* ugtk.pm: export compose_pixbufs for mcc
-	  - ugtk::gtkicons_labels_widget() :
-	o pass icon name in $tag to $exec_func so that the later can display
-	    big icon
-	  o $label_exec is a duplicate of $label
-	  o simplify notebook redrawing:
-	    * remove dam'sugly hacks
-	    * $redraw_function->() : resize Gtk::Fixed on first run if more
-	      than 4 icons
-	    * redraw in only one place
-	    * don't redraw on realize event
-	    (now we both don't flick and have proper icon alignment without
-	     old hacks)
-	  - mcc:
-	  o print big icon while launching a tool (anim in next commit)
-	  o move todo list in TODO
-	  o stricter check:
-	    * default to use strict
-	    * disable strict mode when building rpm
-	    * fixes for 'use strict'
-	  o kill :
-	    * a debugging print
-	    * a superflous 'no warnings'
-	    * a title->show since we never hide it
-	    * $rootheight since gtk packer do the job for us
-	    * unused $nb_pages
-	  o begin to un-hardcode some values (window and notebook size, ...)
-	  o cosmetics:
-	    * comment some code
-	    * add myself to authors list (deush, you should add yourself too
-	      since you're the localedrake/mcc interaction guru)
-	    * s/darea1/summary_darea/
-	  o don't display logs when back in main summary
-	  o destroy pixbuf after
-
-	* harddrake/ui.pm: fix translated string
-
-	* standalone/drakbackup: handle delete_event in all cases
-	use my_gtk for window creation, thus:
-	  - window creation and embedding mode're handled automatically
-	  - when one close drackbackup, my_gtk close it properly and return to
-	mcc
-
-	* drakxtools.spec: 36mdk
-
-	* standalone/drakperm: use my_gtk for embedded mode.
-	code must be cleaned up through my_gtk usage though.
-
-2002/09/06  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: remove contrib packages
-	add !CDCOM for OpenOffice.org
-	move mod_php to 5
-
-2002/09/05  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/zh_TW.po, share/po/sk.po: updated po Slovak and Chinese files
-
-2002/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive/newt.pm: special case to handle many buttons in newt:
-	replacing with something alike ask_from_list (useful for XFdrake)
-
-2002/09/05  David Baudens  <baudens@mandrakesoft.com>
-
-	* standalone/icons/drakfont.620x57.png: Update
-
-	* share/po/fr.po: Update
-	Update
-
-2002/09/05  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/adsl.pm: 
-	  - Remove ECI ADSL modem from menu until we have an agreement
-
-	* network/netconnect.pm: 
-	  - little fix
-
-2002/09/05  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ta.po: updated po file
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/nl.po: updated Dutch file
-
-	* share/po/zh_TW.po, share/po/sk.po: updated po Slovak and Chinese files
-
-2002/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: better NT & Fat bootloader entry adding or not
-	do not add an nt label if there is no magic
-	use name mangling for labels (taken from installkernel)
-
-	* interactive/newt.pm: special case to handle many buttons in newt:
-	replacing with something alike ask_from_list (useful for XFdrake)
-
-	* Xconfig/card.pm, Xconfig/main.pm: add an option for prefering Xinerama
-	in auto_installs
-
-	* fs.pm: set umask=0 for ntfs partitions (currently only used when user
-	sets the mount point to a ntfs partition)
-	(suggested in bug #189)
-
-2002/09/05  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: cleanup check for Expect - thx gc
-
-2002/09/05  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: rc2
-
-2002/09/05  David Baudens  <baudens@mandrakesoft.com>
-
-	* pixmaps/services.png, pixmaps/X.png, pixmaps/quit.png,
-	pixmaps/bootloader.png, pixmaps/language.png, pixmaps/summary.png,
-	pixmaps/security.png, pixmaps/partition.png, pixmaps/default.png,
-	pixmaps/keyboard.png, pixmaps/mouse.png,
-	share/advertising/02-community.png, pixmaps/rootpasswd.png,
-	pixmaps/bootdisk.png, pixmaps/colors16.png, pixmaps/harddrive.png,
-	pixmaps/warning.png, pixmaps/user.png, pixmaps/printer-mdk.png,
-	pixmaps/network.png, standalone/icons/drakfont.620x57.png,
-	pixmaps/eth_card_mini.png: Update
-
-	* share/po/fr.po: Update
-	Update
-	Update
-	Update
-	Update
-
-2002/09/05  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/modem.pm: 
-	  - fix drakconnect broken modem detection
-
-2002/09/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed problem of --auto-select not always run.
-	fixed copy of hdlist to avoid copying ignored media.
-
-	* install_any.pm: allow noauto:... media in hdlists file to be installed
-	for urpmi.
-
-2002/09/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: add baudens
-
-	* drakxtools.spec: meuuuuuuuuuh
-
-	* my_gtk.pm: ask_browse_tree_info_given_widgets: add ability of partial
-	selection clickery leading to unselection for rpmdrake (if
-	someone understands this log message..)
-
-	* mdk-stage1/modules.c, mdk-stage1/usb-resource/update-usb-ids.pl,
-	mdk-stage1/probing.c, mdk-stage1/modules.h: fake support the firewire in
-	stage1 (as if it were usb ;p)
-
-2002/09/05  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* bootlook.pm: add use ugtk.pm
-
-	* standalone/draksplash: preview window bug correction
-
-2002/09/05  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: updated Portuguese file
-
-	* share/po/zh_CN.po: updated Chinese and Danish files
-
-	* share/po/it.po: updated Chinese file, some more Italian typo corrections
-	updated Czech and Swedish files; corrected various erros in Italian file
-
-	* share/po/es.po, share/po/ta.po, share/po/hu.po: updated po file
-
-	* share/po/zh_TW.po: updated Chinese file, some more Italian typo
-	corrections
-
-	* share/po/da.po: updated Chinese and Danish files
-	updated Danish file
-
-	* share/po/cs.po, share/po/sv.po: updated Czech and Swedish files;
-	corrected various erros in Italian file
-
-	* share/po/sk.po: updated Slovak file
-
-	* share/po/vi.po: Updated Vietnamese file
-
-	* share/po/nl.po: updated Dutch file
-
-2002/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/localedrake: workaround kde control center calling
-	localedrake with an empty kde lang
-
-	* diskdrake/dav.pm: add nice description to the initial dialog box (thanks
-	Stew!)
-
-	* install_any.pm: add flag CDCOM when using commercial cds
-
-	* network/network.pm, proxy.pm: allow http://xxx for ftp_proxy
-
-	* lvm.pm: fix using given size for created LVs whereas lvcreate allocates
-	a little less
-	(thanks to Alan Hughes)
-
-	* any.pm (ask_window_manager_to_logout): do not su into user before doing
-	dcop if
-	we are not root (otherwise localedrake in user ask for user's password
-	before login out) (thanks to H. Narfi Stefansson for reporting it)
-
-	* bootloader.pm: do not add an nt label if there is no magic
-	use name mangling for labels (taken from installkernel)
-
-	* standalone/XFdrake: correctly set allowFB flag
-
-2002/09/05  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* drakxtools.spec: rework perl-Expect usage/requirements
-
-	* standalone/drakbackup: cleanup check for Expect - thx gc
-	rework perl-Expect usage/requirements
-
-2002/09/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: don't rely on ctree row number
-
-2002/09/04  David Baudens  <baudens@mandrakesoft.com>
-
-	* standalone/logdrake, standalone/icons/wiz_logdrake.png: Add image for
-	logdrake
-
-	* standalone/icons/drakbackup.540x57.png, drakxtools.spec,
-	standalone/icons/wiz_printerdrake.png, standalone/icons/wiz_drakgw.png,
-	standalone/icons/wiz_scannerdrake.png,
-	standalone/icons/wiz_drakconnect.png, standalone/icons/wiz_firewall.png,
-	standalone/icons/wiz_default_up.png: Update
-
-2002/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/it.po: fix typo
-
-2002/09/04  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/af.po: updated pot file
-
-	* share/po/sk.po, share/po/pt.po, share/po/vi.po, share/po/el.po: updated
-	po file
-	updated Greek, Hungarian, Portuguese, Slovak and Vietnamese files
-
-	* share/po/cy.po: updated Welsh file
-	updated po file
-	updated Danish and Welsh files
-
-	* share/po/da.po: updated po file
-	updated Danish and Welsh files
-
-	* share/po/id.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/ca.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/ta.po, share/po/it.po, share/po/nl.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po: updated po file
-
-	* share/po/hu.po: updated hungarian file
-	updated po file
-	updated Greek, Hungarian, Portuguese, Slovak and Vietnamese files
-
-	* share/po/fr.po: updated po file
-	corrected error syntax
-
-2002/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* drakxtools.spec: remove symlink Xconfigurator (which was broken anyway,
-	thanks to Ian Ventura-Whiting for reporting it)
-
-	* standalone/drakupdate_fstab: do not use standalone (so that no
-	"explaination" are generated)
-
-	* bootloader.pm (same_entries): compare kernel options sorted (this is an
-	approximation of
-	reality since order can matter, but...). An example is "quiet
-	devfs=mount
-	hdc=ide-scsi" vs "devfs=mount hdc=ide-scsi quiet" (thanks to Gabriel
-	Phoenix)
-
-	* ugtk.pm: make perl_checker happy
-
-	* fs.pm: revert add2hash_ username=% to add2hash (it breaks diskdrake
-	--smb not
-	defaulting to username=%, and i can't find out what was wrong in
-	auto_install's manualFstab)
-
-	* install_steps.pm (addUser): fix calling with a user already existing
-	(mainly for installs keeping the / non-formatted, special for pixel)
-
-	* install_steps_interactive.pm: fix dialog box asking "Load from floppy"
-	or "Save on floppy" in individual package selection
-
-2002/09/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* drakxtools.spec: add perl-Expect requires for drakbackup (now enabled
-	and in main)
-
-2002/09/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Makefile.config: add drakperm!
-
-	* share/po/fr.po: s/Si vous disque/Si votre disque/
-	s/Si non,, Les partitions devront �tre cr��s/Sinon, les partitions
-	devront ,bj(Btre cr,bii(Bes/
-	s/des fonctionnalit� additionnelle/des fonctionnalit,bi(Bs
-	additionnelles/
-	s/sur un disque amovibles/sur un disque amovible/
-	s/sauves la table/sauve la table/
-	s/pour r�curer les partitions/pour r,bi(Bcup,bi(Brer les partitions/
-
-	* standalone/drakperm: 
-	  - really embbed
-	  - kill stupid things (aka embedded window withouth any widget vs
-	toplevel window)
-
-	* ugtk.pm: gtkcreate_png_pixbuf() : support jpeg too for bootlook.pm
-
-2002/09/04  baudens
-
-	* standalone/icons/wiz_logdrake.png, standalone/logdrake: Add image for
-	logdrake
-
-	* share/po/fr.po: Update
-	Update
-
-2002/09/04  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* network/network.pm: 
-	  - correct typos in orinoco orinoco_cs modules
-
-2002/09/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig/test.pm: move last warning before removing tempory file in order
-	to have a chance to look
-	at them.
-
-2002/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: add fcrozat
-
-	* rescue/tree/etc/rc.sysinit: drvinst serial_usb in rc.sysinit so that
-	legacy free machines may
-	work with rescue
-
-2002/09/04  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* standalone/drakperm: changing bad save path for perm.local
-
-	* bootlook.pm: replace convert dependencies by gdk-pixbuf dependencies
-
-2002/09/04  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/cy.po, share/po/da.po: updated Danish and Welsh files
-
-2002/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* drakxtools.spec: remove symlink Xconfigurator (which was broken anyway,
-	thanks to Ian Ventura-Whiting for reporting it)
-
-	* bootloader.pm (same_entries): compare kernel options sorted (this is an
-	approximation of
-	reality since order can matter, but...). An example is "quiet
-	devfs=mount
-	hdc=ide-scsi" vs "devfs=mount hdc=ide-scsi quiet" (thanks to Gabriel
-	Phoenix)
-
-	* ugtk.pm: make perl_checker happy
-
-	* install_steps.pm (addUser): fix calling with a user already existing
-	(mainly for installs keeping the / non-formatted, special for pixel)
-
-	* share/keymaps.tar.bz2: update (now includes ro2)
-
-	* install_steps_interactive.pm: fix dialog box asking "Load from floppy"
-	or "Save on floppy" in individual package selection
-
-	* fs.pm: revert add2hash_ username=% to add2hash (it breaks diskdrake
-	--smb not
-	defaulting to username=%, and i can't find out what was wrong in
-	auto_install's manualFstab)
-	handle no options in fs::mount (is it really needed?... it should not!)
-
-	* Xconfig/test.pm: set isInstall in test script otherwise it uses
-	/usr/X11R6/bin/xtest
-
-2002/09/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: enable perl-Expect (moved to main)
-
-2002/09/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Makefile.config: add drakperm!
-
-	* harddrake/ui.pm: 
-	  - add --test option to skip mice|modem|printer detection (now
-	harddrake start instantaneously)
-	  - print probed class to show progression
-	  - fix tree moving by using a Gtk::CTree instead of a Gtk::Tree; side
-	  effect is some code cleaning which compensate above features (code
-	  lenght)
-	  - let my_gtk handle embedded case
-	  - don't try to center window when embedded
-
-	* standalone/drakbackup: embbed drakbackup in mcc
-
-	* drakxtools.spec: 33mdk
-	32mdk
-
-	* standalone/drakperm: 
-	  - really embbed
-	  - kill stupid things (aka embedded window withouth any widget vs
-	toplevel window)
-
-	* ugtk.pm: gtkcreate_png_pixbuf() : support jpeg too for bootlook.pm
-
-	* share/po/fr.po: s/Si vous disque/Si votre disque/
-	s/Si non,, Les partitions devront �tre cr��s/Sinon, les partitions
-	devront ,bj(Btre cr,bii(Bes/
-	s/des fonctionnalit� additionnelle/des fonctionnalit,bi(Bs
-	additionnelles/
-	s/sur un disque amovibles/sur un disque amovible/
-	s/sauves la table/sauve la table/
-	s/pour r�curer les partitions/pour r,bi(Bcup,bi(Brer les partitions/
-	fix dadou fsck; please check the po before comitting it!!!!!
-
-2002/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* drakxtools.spec: meumeu
-	meuh
-
-	* ugtk.pm, my_gtk.pm: try to get rid of BEGIN but still be able to start
-	up the install :-)
-
-2002/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/icons/harddrake2/multimedia.png: re-adding with -kb
-	removing for re-adding with -kb
-
-2002/09/03  baudens
-
-	* share/advertising/09-server.pl, share/advertising/02-community.pl,
-	share/advertising/04-multimedia.pl, share/advertising/07-desktop.pl,
-	share/advertising/14-mdkexpert.pl, share/advertising/03-internet.pl,
-	share/advertising/13-mdkcampus.pl, share/advertising/12-mdkstore.pl,
-	share/advertising/11-mdkstore.pl, share/advertising/05-games.pl: Use
-	official marketing ads
-
-	* share/advertising/list: Add MandrakeClub screen in list
-
-	* share/po/fr.po: Use MandrakeSoft marketing ads
-	Begin to use Mandrake's marketing ads
-
-	* share/advertising/17-mdkclub.pl, share/advertising/17-mdkclub.png: Add
-	MDKclub screen and text
-
-2002/09/03  dam's  <dams@idm.fr>
-
-	* ugtk.pm: added create_pixbutton
-
-	* my_gtk.pm: better icon association
-	added create_pixbutton
-	added add_icon_path for control-center
-
-	* pixmaps/stock_cancel.xpm, pixmaps/stock_right.xpm, pixmaps/stock_ok.xpm,
-	pixmaps/stock_exit.xpm, pixmaps/stock_left.xpm: re-adding with -kb
-	removing for re-adding with -kb
-	icons for ok/cancel/back/previou/next icons
-
-2002/09/03  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* drakxtools.spec: 
-	  -  obsoletes/provides drakfloppy
-
-	* my_gtk.pm: 
-	  - better size of wizard for printerdrake
-
-2002/09/03  fcrozat
-
-	* share/rpmsrate: mdk-eazel-engine is now in gtk-engines
-
-2002/09/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: fixed old Xconf style because it doesn't work anymore on
-	i845 with newer format.
-
-	* mouse.pm: add a sleep and second try for usb mouse.
-	added log when no usb interface is found, rare enough now.
-
-	* ugtk.pm: fixed previous fix;
-	try to avoid clashes with install.
-
-	* modules.pm: make modules.pm patchable (avoid my ...)
-	updated log of add_probeall to be correct.
-
-	* my_gtk.pm: fixed damien (aka pitchounette) sucking, this is not this way
-	pitchounette you
-	will lost your current name as pitchounette :-)
-
-	* install_steps_interactive.pm: fixed too higher percentage.
-
-2002/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* drakxtools.spec: meumeu
-	meuh
-
-	* ugtk.pm: try to get rid of BEGIN but still be able to start up the
-	install :-)
-	have the possibility in gtktext_insert to provide font/color
-	information as well
-	meuh gtk init
-	gtkcreate_png was too stupid to allow subdirectories for images,
-	fix it
-
-	* my_gtk.pm: try to get rid of BEGIN but still be able to start up the
-	install :-)
-
-2002/09/03  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-	* share/po/cs.po: updated po file
-
-	* share/po/zh_CN.po: updated Chinese file
-
-	* lang.pm: Changed Turkish console font
-
-	* share/po/Makefile: enabled ro.po
-
-2002/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/list.i386: add gpart (per Giuseppe Ghib� request)
-
-	* my_gtk.pm: remove the use of Ok/Cancel/Exit icons (per ergonomy team
-	request)
-
-2002/09/03  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Fix empty subnet in /etc/exports /home entry.
-
-2002/09/03  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: remove double translation
-
-	* ugtk.pm: 
-	  - create_pix_text, gtkicons_labels_widget: remove text color argument,
-	default to black
-	  - remove last debugging prints
-	  - ugtk :
-	o create_pix_text:
-	    * remove
-	    * kill uni colored background
-	    * api change:
-	      + background argument => background list
-	      + remove bold argument
-	    * render all text (normal, highlighted, selected) on specified
-	      background in one pass
-	  o gtkicons_labels_widget():
-	    * explain/comment
-	    * move all drawing logic in &$draw
-	    * create buffer area, text pics only one time
-	    * add a pixbuf for highlighted item
-	    * render highlighted icon by making it more transparent
-	    * recalculate drawing buffer only on state change
-	  - mcc :
-	    * move all drawing logic in &$draw
-	    * create buffer area, text pics only one time
-	    * render highlighted icon by making it more transparent
-	    * recalculate drawing buffer only on state change
-
-	* drakxtools.spec: 30mdk
-
-2002/09/02  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm, network/ethernet.pm: 
-	  - fix previous behavior in Expert mode... (100% lazy loop free this
-	time)
-
-	* network/netconnect.pm: 
-	  - network restart previous bug fixed
-
-2002/09/02  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/po/fr.po: corrected a gramatical error
-
-2002/09/02  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: restore auto build of synthesis file (for updates).
-
-	* ugtk.pm: fixed titi suckings.
-
-	* install_steps_interactive.pm: make sure upgrade is done instead.
-
-2002/09/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/id.po, share/advertising/14-mdkexpert.pl, share/po/sk.po,
-	share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po,
-	share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/advertising/03-internet.pl, share/po/ko.po, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/advertising/05-games.pl, share/po/sp.po, share/po/cy.po,
-	share/po/da.po, share/po/ca.po, share/po/ar.po,
-	share/advertising/12-mdkstore.pl, share/advertising/09-server.pl,
-	share/advertising/04-multimedia.pl, share/po/bs.po, share/po/ro.po,
-	share/advertising/13-mdkcampus.pl, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/pt.po, share/po/vi.po, share/po/ta.po, share/po/fr.po,
-	share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/cs.po,
-	share/po/bg.po, share/po/el.po, share/po/hu.po: try to fix broken
-	english in advertisements and not break po's
-
-2002/09/02  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/advertising/12-mdkstore.pl,
-	share/advertising/15-mdkexpert-corporate.pl: small fix
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/ta.po, share/po/fr.po, share/po/nl.po,
-	share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/bg.po, share/po/el.po: updated
-	pot file
-
-	* share/advertising/14-mdkexpert.pl: fixed typo
-	small fix
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* help.pm: Fixed typo
-
-	* share/po/zh_TW.po: updated Chinese file
-	updated pot file
-
-	* share/po/pl.po, share/po/cs.po: updated pot file
-	updated Czech and Polish files
-
-2002/09/02  Till Kamppeter  <till@mandrakesoft.com>
-
-	* share/rpmsrate: Updated for the new printerdrake.
-
-2002/09/02  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/data.pm: use new ln icons
-
-	* ugtk.pm: gtkicons_labels_widget(): check binary exists
-
-	* drakxtools.spec, Makefile.drakxtools: 29mdk: add harddrake icons
-
-	* standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/usb.png, standalone/icons/harddrake2/tv.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/modem.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/cd.png, standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/hw_network.png: add new icons
-	remove old icons
-	add new ln icons
-
-	* standalone/icons/harddrake2/menu/harddrake-menu48.png,
-	standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/menu/harddrake-menu16.png,
-	standalone/icons/harddrake2/menu/harddrake-menu32.png,
-	standalone/icons/harddrake2/multimedia.png,
-	standalone/icons/harddrake2/K7.png: add new ln icons
-
-2002/09/02  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/po/fr.po: corrected a gramatical error
-
-2002/09/02  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: restore auto build of synthesis file (for updates).
-
-	* ugtk.pm: fixed titi suckings.
-
-	* install_steps_interactive.pm: make sure upgrade is done instead.
-
-2002/09/02  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/pl.po: updated Czech and Polish files
-
-2002/09/02  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm: gtkicons_labels_widget(): check binary exists
-	kill glib warnings
-
-	* harddrake/data.pm: use new ln icons
-
-	* drakxtools.spec, Makefile.drakxtools: 29mdk: add harddrake icons
-
-	* standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/usb.png, standalone/icons/harddrake2/tv.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/modem.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/cd.png, standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/hw_network.png: add new icons
-	remove old icons
-	add new ln icons
-
-	* standalone/icons/harddrake2/menu/harddrake-menu48.png,
-	standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/menu/harddrake-menu16.png,
-	standalone/icons/harddrake2/menu/harddrake-menu32.png,
-	standalone/icons/harddrake2/multimedia.png,
-	standalone/icons/harddrake2/K7.png: add new ln icons
-
-2002/09/02  baudens
-
-	* share/advertising/list, share/advertising/07-desktop.pl,
-	share/advertising/05-games.pl, share/advertising/06-mcc.pl: Update
-
-	* share/advertising/09-server.pl, share/advertising/04-multimedia.pl,
-	share/advertising/14-mdkexpert.pl, share/advertising/13-mdkcampus.pl,
-	share/advertising/11-mdkstore.pl, share/advertising/02-community.pl,
-	share/advertising/01-thanks.pl, share/advertising/03-internet.pl,
-	share/advertising/10-mnf.pl,
-	share/advertising/15-mdkexpert-corporate.pl,
-	share/advertising/08-development.pl, share/advertising/12-mdkstore.pl:
-	Update
-	Update
-
-2002/09/02  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* Makefile.config, drakxtools.spec, standalone.pm, docs/README.devel: 
-	  - s/tinyfirewall/drakfirewall/
-
-	* standalone/drakbug: s/tinyfirewall/drakfirewall/
-	  - drakbug point to https://drakbug.mandrakesoft.com
-
-	* network/netconnect.pm, standalone/tinyfirewall, standalone/drakfirewall,
-	network/drakfirewall.pm, network/tinyfirewall.pm: 
-	  - replace tinyfirewall by drakfirewall
-
-2002/09/02  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: sympa => mailman
-	removed PHP-nuke
-
-	* share/po/fr.po: corrected a gramatical error
-
-2002/09/02  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: make sure upgrade is done instead.
-	reverted previous modification moved to crypto module.
-	make sure rpmdb is open before displaying packages tree.
-
-	* install2.pm: now allow meta_class option on command line to be taken
-	into account instead of
-	previous options desktop and firewall.
-
-	* install_steps.pm: add $o->{packages} to install_any::install_urpmi call.
-
-	* install_any.pm: restore auto build of synthesis file (for updates).
-	fixed typo.
-	fix list building not to use parsehdlist.
-	install_urpmi only install selected media.
-
-	* crypto.pm: fix typo.
-	allow selecting packages to upgrade.
-
-	* install_steps_gtk.pm: strange typo where no filtering on medium was
-	issued ?
-
-	* pkgs.pm: fixed to call to getFile by giving medium description,
-	necessary for updates.
-	allow selectPackagesToUpgrade to use a specific medium instead of all of
-	them.
-
-	* ugtk.pm: fixed titi suckings.
-
-2002/09/02  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* drakperm: solving bugs on add and save functions
-
-2002/09/02  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech and Polish files
-
-	* share/po/sv.po, share/po/sk.po, share/po/de.po, share/po/zh_TW.po,
-	share/po/tr.po, share/po/hu.po: updated Hungarian, Turkish, Swedish,
-	Slovak and Chinese files
-
-	* share/po/pl.po: updated Czech and Polish files
-	updated Hungarian, Turkish, Swedish, Slovak and Chinese files
-
-	* share/po/es.po, share/po/ru.po: updated Spanish and Russian files
-
-2002/09/02  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm: gtkicons_labels_widget(): check binary exists
-	kill glib warnings
-
-	* harddrake/sound.pm, harddrake/ui.pm: display alternative drivers (oss,
-	alsa) for sound cards
-
-	* harddrake/data.pm: use new ln icons
-
-	* drakxtools.spec, Makefile.drakxtools: 29mdk: add harddrake icons
-
-	* standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/modem.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/usb.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/cd.png, standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/hw_network.png: add new icons
-	remove old icons
-	add new ln icons
-
-	* share/po/fr.po: update french translation
-
-	* standalone/icons/harddrake2/menu/harddrake-menu48.png,
-	standalone/icons/harddrake2/multimedia.png,
-	standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/menu/harddrake-menu16.png,
-	standalone/icons/harddrake2/menu/harddrake-menu32.png,
-	standalone/icons/harddrake2/K7.png: add new ln icons
-
-2002/09/01  alus
-
-	* share/po/pl.po: and more...
-	some translations
-
-2002/09/01  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: updated Vientamese file
-
-2002/09/01  siegel
-
-	* share/po/de.po: updates
-	new german version
-
-2002/09/01  Till Kamppeter  <till@mandrakesoft.com>
-
-	* scanner.pm: s/Seiko Epson/Epson/ in subroutine to update ScannerDB from
-	Sane.
-
-	* printerdrake.pm: 
-	  - Tell users of the HP LaserJet 1000 that they have to upload firmware
-	to the printer.
-	  - Updated instructions to get Lexmark's inkjet drivers.
-	  - Suppressed the display of the "Refresh printer list" and "Specify
-	CUPS server" buttons in recommended mode when there is no local network.
-
-2002/08/31  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated po file
-	updated pot file
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/ta.po,
-	share/po/fr.po, share/po/nl.po, share/po/it.po, share/po/eu.po,
-	share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po,
-	share/po/cs.po, share/po/bg.po, share/po/el.po: updated pot file
-
-	* share/advertising/14-mdkexpert.pl, share/advertising/12-mdkstore.pl,
-	share/advertising/15-mdkexpert-corporate.pl: no need to translate web
-	adresses
-
-	* standalone/drakbackup: fixed use of variables in translatable strings
-
-2002/08/31  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: Fix prompt text saved as filename - Advanced What
-	- Other
-
-2002/08/31  siegel
-
-	* share/po/de.po: some upadtes
-
-2002/08/31  Warly  <warly@mandrakesoft.com>
-
-	* share/rpmsrate: add shorewall and iptables in INSTALL section
-
-2002/08/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed possible problem with is_installed and
-	are_installed.
-
-	* install_steps.pm: fixed call to pkgs::remove.
-
-2002/08/30  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2002/08/30  siegel
-
-	* share/po/de.po: update german version
-
-2002/08/30  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: 
-	  - Fixed bugs in automatic GIMP printer configuration during
-	installation.
-	  - Worked around a bug of "ls -r xxx*" returning "xxx*" instead of
-	nothing when "xxx*" does not exist ("ls" of "busybox" during
-	installation).
-
-2002/08/30  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm, drakxtools.spec: 
-	  - mcc :
-	o kill gtkpng_() and gtk_createpng_() wrappers: if icon is missing,
-	    better die while testing rather than make perl display "uncaught
-	    code ..."
-	  o kill unused timer
-	  o use new ln's icons
-	  o disable stupid icon highlighting (was made with duplicating
-	    manually all icons in gimp and blue-y them there); restore this
-	    effect'll need little play with gamma
-	  o use ugtk
-	  o kill dead code
-	  o cleanups
-	  o icons:
-	    * switch to new icons set
-	    * replace pixmap table by a pixbuf one
-	    * use pixbufs for backgrouns and icons,
-	    * composite background and icons with transparency trough
-	      ugtk::compose_pixbufs()
-	    * render icons with full alpha blender in left column
-	    * comment the different states
-	    * simplify callbacks
-	  - ugtk :
-	  o readd gdkpixbuf support
-	  o ensure imlib is used by default to load files, not gdk-pixbuf
-	  o compose_with_back(): load a png icon into a pixbuf and call
-	    compose_pixbufs with background pixbuf
-	  o compose_pixbufs(): render transparent icon onto background into a
-	    new pixbuf
-	  o merge gtkcreate_png_pixbuf() from gdk-pixbuf-0-branch : load an
-	    icon into a pixbuf
-	    gdk-pixbuf-0-branch also uses it to simplify a lot of code
-	  o gtkicons_labels_widget() :
-	    * add a new background pixbuf parameter that'll be composited with
-	icons
-	    * render icons with alpha blender in right area
-	    * kill imlib_counter
-	    * kill imlib usage for
-	    * kill dead code (was dead since i fixed mcc memory leaks)
-	
-	  - TODO: icon flashing on application launch
-	
-	  - POSTPONED: merge big cleanup, global replacement of imlib usage by
-	gdk-pixbuf
-	             from gdk-pixbuf-0-branch since it would impacted drakx
-	which is not
-	             so good
-
-2002/08/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed possible problem with is_installed and
-	are_installed.
-
-2002/08/30  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2002/08/30  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm, drakxtools.spec: 
-	  - mcc :
-	o kill gtkpng_() and gtk_createpng_() wrappers: if icon is missing,
-	    better die while testing rather than make perl display "uncaught
-	    code ..."
-	  o kill unused timer
-	  o use new ln's icons
-	  o disable stupid icon highlighting (was made with duplicating
-	    manually all icons in gimp and blue-y them there); restore this
-	    effect'll need little play with gamma
-	  o use ugtk
-	  o kill dead code
-	  o cleanups
-	  o icons:
-	    * switch to new icons set
-	    * replace pixmap table by a pixbuf one
-	    * use pixbufs for backgrouns and icons,
-	    * composite background and icons with transparency trough
-	      ugtk::compose_pixbufs()
-	    * render icons with full alpha blender in left column
-	    * comment the different states
-	    * simplify callbacks
-	  - ugtk :
-	  o readd gdkpixbuf support
-	  o ensure imlib is used by default to load files, not gdk-pixbuf
-	  o compose_with_back(): load a png icon into a pixbuf and call
-	    compose_pixbufs with background pixbuf
-	  o compose_pixbufs(): render transparent icon onto background into a
-	    new pixbuf
-	  o merge gtkcreate_png_pixbuf() from gdk-pixbuf-0-branch : load an
-	    icon into a pixbuf
-	    gdk-pixbuf-0-branch also uses it to simplify a lot of code
-	  o gtkicons_labels_widget() :
-	    * add a new background pixbuf parameter that'll be composited with
-	icons
-	    * render icons with alpha blender in right area
-	    * kill imlib_counter
-	    * kill imlib usage for
-	    * kill dead code (was dead since i fixed mcc memory leaks)
-	
-	  - TODO: icon flashing on application launch
-	
-	  - POSTPONED: merge big cleanup, global replacement of imlib usage by
-	gdk-pixbuf
-	             from gdk-pixbuf-0-branch since it would impacted drakx
-	which is not
-	             so good
-
-2002/08/30  baudens
-
-	* share/advertising/list: Temporary fix
-
-	* share/advertising/15-mdkexpert-corporate.pl,
-	share/advertising/14-mdkexpert.pl, share/advertising/13-mdkcampus.pl,
-	share/advertising/12-mdkstore.pl, share/advertising/11-mdkstore.pl:
-	Temporary new texts. Need to be checked and fixed
-
-2002/08/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed possible problem with is_installed and
-	are_installed.
-
-2002/08/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* network/network.pm: fix looping on network step when configuring
-	ethernet card
-
-2002/08/30  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-	updated Swedish file
-
-2002/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: 
-	  - use keyboard::keyboard2full_xkb
-	  - call setxkbmap with -option and -model
-	  - use "/etc/init.d/keytable restart" instead of loadkeys
-
-	* keyboard.pm, Xconfig/default.pm: most of the code of
-	Xconfig::default::config_keyboard moved to keyboard::keyboard2full_xkb
-
-	* verify_c: ignore c::from_utf8
-
-	* any.pm: 
-	  - set GRP_TOGGLE to '' when no GRP_TOGGLE are used
-	  - defaults to previous GRP_TOGGLE if one is available
-
-	* Xconfig/card.pm: make perl_checker happy
-
-	* Xconfig/resolution_and_depth.pm: fix typo (choosing the Flat Panel
-	resolution by default)
-
-2002/08/30  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm, drakxtools.spec: 
-	  - mcc :
-	o kill gtkpng_() and gtk_createpng_() wrappers: if icon is missing,
-	    better die while testing rather than make perl display "uncaught
-	    code ..."
-	  o kill unused timer
-	  o use new ln's icons
-	  o disable stupid icon highlighting (was made with duplicating
-	    manually all icons in gimp and blue-y them there); restore this
-	    effect'll need little play with gamma
-	  o use ugtk
-	  o kill dead code
-	  o cleanups
-	  o icons:
-	    * switch to new icons set
-	    * replace pixmap table by a pixbuf one
-	    * use pixbufs for backgrouns and icons,
-	    * composite background and icons with transparency trough
-	      ugtk::compose_pixbufs()
-	    * render icons with full alpha blender in left column
-	    * comment the different states
-	    * simplify callbacks
-	  - ugtk :
-	  o readd gdkpixbuf support
-	  o ensure imlib is used by default to load files, not gdk-pixbuf
-	  o compose_with_back(): load a png icon into a pixbuf and call
-	    compose_pixbufs with background pixbuf
-	  o compose_pixbufs(): render transparent icon onto background into a
-	    new pixbuf
-	  o merge gtkcreate_png_pixbuf() from gdk-pixbuf-0-branch : load an
-	    icon into a pixbuf
-	    gdk-pixbuf-0-branch also uses it to simplify a lot of code
-	  o gtkicons_labels_widget() :
-	    * add a new background pixbuf parameter that'll be composited with
-	icons
-	    * render icons with alpha blender in right area
-	    * kill imlib_counter
-	    * kill imlib usage for
-	    * kill dead code (was dead since i fixed mcc memory leaks)
-	
-	  - TODO: icon flashing on application launch
-	
-	  - POSTPONED: merge big cleanup, global replacement of imlib usage by
-	gdk-pixbuf
-	             from gdk-pixbuf-0-branch since it would impacted drakx
-	which is not
-	             so good
-
-2002/08/30  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: rc1
-
-2002/08/30  baudens
-
-	* share/advertising/list: Temporary fix
-
-2002/08/30  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* install_steps_newt.pm: Added text for translators
-
-	* share/po/nl.po, share/po/cy.po, share/po/eu.po, share/po/cs.po: updated
-	po files
-
-2002/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/resolution_and_depth.pm: fix typo (choosing the Flat Panel
-	resolution by default)
-
-2002/08/30  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: rc1
-
-2002/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* share/keymaps.tar.bz2: now the only bad one is ro2
-
-	* share/po/it.po, share/po/help-fr.pot, share/po/help-de.pot,
-	share/po/es.po, share/po/de.po, share/po/help-es.pot,
-	share/po/help-it.pot, share/po/fr.po: 
-	  - re-update help-xx.pot after fixing bad drakxid's in xml files
-	  - update xx.po's using help-xx.pot
-	=> at last, DrakX help is now in sync with xml files :)
-
-	* pixmaps/printer-mdk.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* detect_devices.pm (isRemovableDrive): usb with class "Floppy (UFI)" are
-	removable even if they are not media_type fd
-
-	* share/po/help_xml2pm.pl: 
-	  - fix missing to_ascii on english part in help-xx.pot
-	  - ignore drakxid's in a language but not in english
-
-2002/08/29  baudens
-
-	* share/advertising/09-MDKcampus_icon.png,
-	share/advertising/12-MDKstore_icon.png, share/advertising/00-thanks.png,
-	share/advertising/10-MDKexpert.png, share/advertising/06-user.png,
-	share/advertising/03-graphic_icon.png, share/advertising/03-graphic.png,
-	share/advertising/13-Nvert.png, share/advertising/04-develop_icon.png,
-	share/advertising/12-MDKstore.png,
-	share/advertising/05-contcenter_icon.png,
-	share/advertising/02-internet_icon.png,
-	share/advertising/02-internet.png, share/advertising/08-games.png,
-	share/advertising/11-consul.png, share/advertising/06-user_icon.png,
-	share/advertising/07-server.png, share/advertising/04-develop.png,
-	share/advertising/10-MDKexpert_icon.png,
-	share/advertising/07-server_icon.png,
-	share/advertising/08-games_icon.png, share/advertising/01-gnu.png,
-	share/advertising/05-contcenter.png, share/advertising/09-MDKcampus.png:
-	Remove old images
-
-	* share/advertising/07-desktop.png, share/advertising/14-mdkexpert.png,
-	share/advertising/01-thanks.png, share/advertising/02-community.png,
-	share/advertising/11-mdkstore.png, share/advertising/12-mdkstore.png,
-	share/advertising/04-multimedia.png, share/advertising/05-games.png,
-	share/advertising/03-internet.png, share/advertising/06-mcc.png,
-	share/advertising/13-mdkcampus.png, share/advertising/10-mnf.png,
-	share/advertising/16-thanks.png,
-	share/advertising/15-mdkexpert-corporate.png,
-	share/advertising/09-server.png, share/advertising/08-development.png:
-	New images
-
-	* share/advertising/05-contcenter.pl, share/advertising/09-MDKcampus.pl,
-	share/advertising/08-games.pl, share/advertising/11-consul.pl,
-	share/advertising/07-server.pl, share/advertising/01-gnu.pl,
-	share/advertising/03-graphic.pl, share/advertising/02-internet.pl,
-	share/advertising/00-thanks.pl, share/advertising/04-develop.pl,
-	share/advertising/06-user.pl, share/advertising/12-MDKstore.pl,
-	share/advertising/13-Nvert.pl, share/advertising/10-MDKexpert.pl: Remove
-	old texts
-
-	* share/advertising/02-community.pl, share/advertising/01-thanks.pl,
-	share/advertising/05-games.pl, share/advertising/09-server.pl,
-	share/advertising/04-multimedia.pl, share/advertising/07-desktop.pl,
-	share/advertising/10-mnf.pl, share/advertising/08-development.pl,
-	share/advertising/06-mcc.pl, share/advertising/03-internet.pl: New text
-	(other will come later)
-
-2002/08/29  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* network/adsl.pm: 
-	  - dns settings for pppoe
-	  - set DNS in adsl config.
-	  - update speedtouch link
-
-2002/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/probe.c: merge some code from pcmcia-cs-3.2.1 so that
-	some pci pcmcia driver
-	use i82365 rather than yenta_socket
-
-	* standalone/logdrake: in explain mode, don't display day and hostname to
-	have more
-	space for the rest
-
-	* drakxtools.spec: meuh
-	24mdk
-
-	* my_gtk.pm: ask_browse: display_info needs to be available for rpmdrake
-
-2002/08/29  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* drakperm: Gui for file permission in msec
-
-2002/08/29  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* standalone/drakfont, standalone/drakxtv: English typos (no space before
-	colon in English)
-
-	* share/po/es.po: updated po file
-	updated pot file
-
-	* share/po/sk.po, share/po/vi.po: updated Slovak and Vietnamese files
-	updated pot file
-
-	* share/po/id.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/ta.po, share/po/fr.po, share/po/it.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/cs.po, share/po/bg.po,
-	share/po/el.po, share/po/hu.po: updated pot file
-
-	* share/rpmsrate: removed ami-gnome (the package won't be in 9.0, as it
-	doesn't work
-	with Gnome2)
-
-	* harddrake/ui.pm: English typos (Quitter->Quit,
-	Informations->Information)
-	corrected English typos (no space before colon in English)
-
-	* share/po/cy.po, share/po/nl.po, share/po/eu.po: updated pot file
-	updated Welsh, Basque and Dutch files
-
-	* harddrake/v4l.pm, standalone/drakbackup: corrected English typos (no
-	space before colon in English)
-
-2002/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* share/keymaps.tar.bz2: now the only bad one is ro2
-
-	* share/po/help_update_english_only.pl: semi-automatic script allowing to
-	update help.pm without creating a hell lot of "fuzzy" in po's
-
-	* share/po/Makefile: workaround missing entities in spanish
-	adapt to new manual cvs dirs
-
-	* share/po/help_xml2pm.pl: 
-	  - fix missing to_ascii on english part in help-xx.pot
-	  - ignore drakxid's in a language but not in english
-	  - adapt to new manualB xml help
-	  - fix tr/// causing havoc in french accents (and other)
-
-	* install2.pm (formatPartitions): create /dev/null as soon as possible on
-	to be installed system
-
-	* detect_devices.pm (isRemovableDrive): usb with class "Floppy (UFI)" are
-	removable even if they are not media_type fd
-	(isRemovableUsb): using "Floppy (UFI)" usb media_type is no good, use
-	magical usb2removable instead
-	(usb_description2removable): more entries
-	(suggest_mount_point): use new function usb2removable
-
-	* share/po/help-eu.pot: not available anymore (=> use the i18n from eu.po)
-
-	* help.pm: update help from xml
-
-	* standalone/drakupdate_fstab: fix check_hard_drives
-	in --auto, print the mount points add/removed for use in hotplug
-	  - add option --auto
-	  - when --auto, ignore actions on partitions when the drive has
-	extended partitions
-
-	* devices.pm: allow creation of "/dev/null" device
-
-	* share/po/sk.po, share/po/gl.po, share/po/pt_BR.po, share/po/th.po,
-	share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/be.po,
-	share/po/ko.po, share/po/sv.po, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/da.po, share/po/ca.po, share/po/ar.po,
-	share/po/ro.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/eu.po,
-	share/po/lv.po, share/po/hu.po, share/po/id.po, share/po/ru.po,
-	share/po/no.po, share/po/sl.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/uk.po, share/po/lt.po, share/po/cy.po,
-	share/po/sp.po, share/po/bs.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/pt.po, share/po/ta.po,
-	share/po/vi.po, share/po/nl.po, share/po/eo.po, share/po/el.po,
-	share/po/bg.po, share/po/cs.po: automatic update to new help.pm (so that
-	no fuzzy appears)
-
-	* share/po/help-de.pot, share/po/help-it.pot, share/po/help-fr.pot,
-	share/po/help-es.pot: 
-	  - re-update help-xx.pot after fixing bad drakxid's in xml files
-	  - update xx.po's using help-xx.pot
-	=> at last, DrakX help is now in sync with xml files :)
-	update help from xml
-
-	* install_steps_gtk.pm: rpm description & group are in utf8, so use
-	c::from_utf8
-
-	* standalone/drakgw: drakgw now needs shorewall, so install shorewall if
-	needed (fix bug reported by Erwan)
-
-	* share/po/it.po, share/po/es.po, share/po/fr.po, share/po/de.po: 
-	  - re-update help-xx.pot after fixing bad drakxid's in xml files
-	  - update xx.po's using help-xx.pot
-	=> at last, DrakX help is now in sync with xml files :)
-	automatic update to new help.pm (so that no fuzzy appears)
-
-2002/08/29  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: GUI feedback during restore.
-
-2002/08/29  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: s/||/or/ between commands, the high-precedence "||" lead to
-	problems sometimes.
-
-2002/08/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/data.pm: move STORAGE_OTHER devices in ata controllers (aka
-	pseudo raid controllers
-	ala pdc)
-
-	* standalone/logdrake: add a scroll bar in embedded mode for mcc
-
-	* standalone/service_harddrake, harddrake/TODO: 25mdk
-
-	* harddrake/ui.pm: embedded mode: exit on "quit" click
-
-	* drakxtools.spec: harddrake service:
-	  - Prereq: rpm-helper
-	  - fix init-script-without-chkconfig-{post,preun}
-	  - s/perl -w/perl/
-	  - don't use diags and strict
-	gc must how learn to commit
-	25mdk
-
-2002/08/28  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/th.po: fixed Project-Id line
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/bs.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/sl.po, share/po/af.po, share/po/az.po, share/po/ja.po,
-	share/po/ga.po, share/po/uk.po, share/po/ko.po, share/po/sr.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po,
-	share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/eo.po,
-	share/po/lv.po, share/po/cs.po, share/po/bg.po, share/po/el.po,
-	share/po/ar.po: fixed Project-Id header
-
-2002/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/card.pm: 
-	  - ensure prefer_xf3 is never set when {server} is missing
-	  - don't propose xfree3 when no {server} for the card
-	  - don't propose xfree4 when no {Driver} for the card
-
-	* detect_devices.pm: 
-	  - why did hds() did return removable drives in standalone? changing
-	this (this was written in 1999 so no good reason must stand)
-	  - remove the ugly isFloppyOrHD
-	  - new function get_usb_storage_info which magically links
-	/proc/scsi/scsi entries to /proc/bus/usb/devices & usbtable one :)
-	  - new function usb_description2removable which tries to categorize the
-	removables
-	  - new function removables returning various things
-	  - new function isRemovableUsb using usb class
-	  - new function isFloppyUsb using the usbtable "Removable:floppy"
-	  - suggest_mount_point use "Removable:xxx" entries from usbtable, or
-	usb_description2removable()
-
-	* drakxtools.spec: 
-	  - drakupdate_fstab first appearance
-	  - remind me to teach titi how to commit
-
-	* Makefile.config, standalone/drakupdate_fstab: new prog drakupdate_fstab
-
-	* fs.pm: use add2hash_ for setting "username=%" otherwise it causes havoc
-	in auto_install's manualFstab
-	  - read_fstab, write_fstab: add the possibility to not change
-	credentials
-	  - use detect_devices::removables()
-
-2002/08/28  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatical configuration of the
-	printers in the GIMP.
-
-2002/08/28  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/logdrake: 
-	  - fix logdrake display window in embedded mode
-
-2002/08/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: small fix
-
-2002/08/28  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: updated po files
-	Changed encoding of Vietnamese file to be the same as used in vi.po of
-	rpmdrake
-
-	* share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po,
-	share/po/bs.po, share/po/af.po, share/po/az.po, share/po/eo.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po: fixed Project-Id header
-	updated pot file
-
-	* share/po/br.po, share/po/be.po, share/po/DrakX.pot, share/po/de.po:
-	updated pot file
-
-	* share/po/ro.po: updated po files
-	updated po files
-	updated Italian and Romanian files
-
-	* share/po/tr.po: updated Turkish file
-	updated po files
-	updated po files
-
-	* share/po/sk.po, share/po/no.po, share/po/mt.po, share/po/sv.po,
-	share/po/ta.po, share/po/nl.po: updated po files
-	updated po files
-
-	* harddrake/sound.pm: Fixed typo (no space before a colon in English)
-
-	* share/po/gl.po, share/po/pt_BR.po, share/po/ga.po, share/po/pl.po,
-	share/po/fi.po: fixed Project-Id header
-	updated po files
-
-	* share/po/it.po: updated po files
-	updated Italian and Romanian files
-
-	* share/po/th.po: fixed Project-Id line
-	updated po files
-	updated po files
-
-	* share/po/id.po, share/po/et.po, share/po/hr.po, share/po/wa.po,
-	share/po/is.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/eu.po, share/po/es.po, share/po/hu.po: updated
-	po files
-
-	* share/po/ru.po, share/po/sl.po, share/po/ja.po, share/po/uk.po,
-	share/po/ko.po, share/po/sr.po, share/po/lt.po, share/po/sp.po,
-	share/po/lv.po: fixed Project-Id header
-	updated po files
-	updated po files
-
-2002/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (is_same_hd): add ugly support for davfs devices (http://...)
-	comparison without the ending "/"
-
-	* partition_table/dos.pm (partition_table::dos::last_usable_sector): don't
-	use totalsectors, compute it so that it is cylinder aligned
-
-	* Xconfig/monitor.pm: choose a good_default_monitor based on laptop-or-not
-	(thanks to cosmic flo)
-
-	* fs.pm: use add2hash_ for setting "username=%" otherwise it causes havoc
-	in auto_install's manualFstab
-	  - read_fstab, write_fstab: add the possibility to not change
-	credentials
-	  - use detect_devices::removables()
-	remove deprecated comment (supermount *does* handle auto type nowadays)
-	(set_default_options): use $is_removable to know if it is removable
-	instead of
-	testing the presence of $part->{rootDevice} (this must be old code
-	predating
-	the avaibility of $is_removable)
-	create detect_devices::suggest_mount_point and use it instead of doing
-	it in fs::set_removable_mntpoints
-	use mkdir_p instead of mkdir
-	use new function part2device() to have the file from {device} (fixes
-	mounting of ntfs in standalone)
-	default option username=% for smb
-
-	* Makefile.config, standalone/drakupdate_fstab: new prog drakupdate_fstab
-
-	* interactive.pm, interactive/gtk.pm: add {callbacks}{advanced}, called
-	when "Advance" button is pressed
-
-	* standalone/diskdrake: remove unused $fstab
-
-	* detect_devices.pm: 
-	  - why did hds() did return removable drives in standalone? changing
-	this (this was written in 1999 so no good reason must stand)
-	  - remove the ugly isFloppyOrHD
-	  - new function get_usb_storage_info which magically links
-	/proc/scsi/scsi entries to /proc/bus/usb/devices & usbtable one :)
-	  - new function usb_description2removable which tries to categorize the
-	removables
-	  - new function removables returning various things
-	  - new function isRemovableUsb using usb class
-	  - new function isFloppyUsb using the usbtable "Removable:floppy"
-	  - suggest_mount_point use "Removable:xxx" entries from usbtable, or
-	usb_description2removable()
-	create detect_devices::suggest_mount_point and use it instead of doing
-	it in fs::set_removable_mntpoints
-	use mkdir_p instead of mkdir
-
-	* Xconfig/main.pm: fix calling export_to_install_X in
-	configure_everything_auto_install
-
-	* install_steps.pm: 
-	  - use $::prefix in any::get_secure_level()
-	  - fix any::get_secure_level() not using prefix when it should
-
-	* Xconfig/xfree3.pm, Xconfig/xfree4.pm: Xconfig::xfree3::set_resolution
-	and Xconfig::xfree4::set_resolution must not modify parameter $Screen
-	before calling Xconfig::xfreeX::set_resolution (otherwise the resolution
-	setting is done on only one device which is bad for multi-head)
-
-	* any.pm: 
-	  - use $::prefix in any::get_secure_level()
-	  - fix any::get_secure_level() not using prefix when it should
-	(selectLanguage): fix the ugly use of focus_out for setting langs. Was
-	completly rubbish in newt.
-
-	* network/tinyfirewall.pm: better error message
-
-	* partition_table.pm: remove associating 0x35 => 'jfs' since it causes
-	types_rev to associate jfs to 0x35 instead of 0x383
-
-	* loopback.pm, devices.pm, install_any.pm: use mkdir_p instead of mkdir
-
-	* install_steps_interactive.pm: bus/usb category prompting is automatic
-
-	* diskdrake/interactive.pm, diskdrake/removable.pm,
-	diskdrake/smbnfs_gtk.pm: in "Mount point", by default choose the default
-	proposition (asked by dadou for smb)
-
-	* diskdrake/dav.pm: add "Mount" and "Unmount"
-	in "Mount point", by default choose the default proposition (asked by
-	dadou for smb)
-
-	* Xconfig/resolution_and_depth.pm: on a "Flat Panel" use the flat planel
-	resolution (as suggested by Alastair Scott)
-
-	* install_steps_gtk.pm, share/list, Makefile: group icons are not used,
-	remove them
-
-2002/08/28  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: Printerdrake remembers now whether it was in normal mode or
-	in expert
-	mode last time.
-	OpenOffice.org: Remove default printer tag from the "Generic Printer"
-	when Printerdrake adds an entry for the system's default printer.
-
-	* pixmaps/printer-mdk.png, pixmaps/printer.png: Renamed icon of
-	Printerdrake so that it does not get overwritten by
-	Star Office.
-
-	* standalone/printerdrake: Printerdrake remembers now whether it was in
-	normal mode or in expert
-	mode last time.
-	Renamed icon of Printerdrake so that it does not get overwritten by
-	Star Office.
-
-	* printerdrake.pm: Printerdrake remembers now whether it was in normal
-	mode or in expert
-	mode last time.
-
-2002/08/28  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: 
-	  - embeded mode:
-	o only display menu bar if not in embedded mode
-	  o add a "quit" button in  embedded mode
-	  - make my_gtk ui be readable by indentation
-
-	* harddrake/TODO: update
-
-2002/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/various.pm, standalone/drakboot: use the new fsedit::get_hds
-
-	* detect_devices.pm: set {prefix} for rd/ida/cciss/... (instead of doing
-	it in fsedit::hds)
-
-	* fsedit.pm: 
-	  - create lvms() which contains what was in hds()
-	  - create get_hds() which handle errors when calling hds()
-	  - remove commented obsolete code
-	  - read_partitions is now read_proc_partitions_raw
-	  - readProcPartitions is now read_proc_partitions
-	  - read_proc_partitions use fake {start}s so that the empty space is
-	computed ok by get_normal_parts_and_holes
-	  - verifyHds doesn't exist anymore
-	  - part of it is in hds() using compare_with_proc_partitions() and
-	use_proc_partitions()
-	  - part of it is in install_any::getHds
-
-	* partition_table.pm: 
-	  - do not handle clearall in read()
-	  - ensure not partition table in written when "readonly" (it must not
-	happen, but just in case)
-
-	* diskdrake/interactive.pm: handle "readonly" per hds
-
-	* partition_table/raw.pm (test_for_bad_drives): classify error messages
-	(either read, write or something-else)
-
-	* install_interactive.pm: handle "readonly" flag per hard drives instead
-	of a global one
-
-	* standalone/diskdrake: use function fsedit::get_hds which handles errors
-
-	* share/po/de.po: remove duplicate entries
-
-	* install_steps_interactive.pm, install_any.pm: remove/simplify error
-	hanling (most of it is moved to fsedit.pm)
-
-	* any.pm, bootloader.pm, install2.pm: :x
-
-	* diskdrake/hd_gtk.pm: nicer error message when no devices are available
-	(esp. for standalone)
-
-2002/08/27  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: 
-	  - new 'previous' button bug fix
-
-2002/08/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: display a warning message about packages
-	to remove.
-
-	* install_any.pm: added warn about packages to remove.
-
-	* crypto.pm: restore real distrution version used.
-
-2002/08/27  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated po file
-
-	* share/po/sk.po: updated Slovak file
-
-2002/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm: handle "readonly" per hds
-
-	* Xconfig/various.pm, standalone/drakboot: use the new fsedit::get_hds
-
-	* my_gtk.pm: 
-	  - add ",*-r-*" in wizard fontset
-	  - i18n the fontset
-
-	* detect_devices.pm: set {prefix} for rd/ida/cciss/... (instead of doing
-	it in fsedit::hds)
-
-	* partition_table/raw.pm (test_for_bad_drives): classify error messages
-	(either read, write or something-else)
-
-	* fsedit.pm: 
-	  - create lvms() which contains what was in hds()
-	  - create get_hds() which handle errors when calling hds()
-	  - remove commented obsolete code
-	  - read_partitions is now read_proc_partitions_raw
-	  - readProcPartitions is now read_proc_partitions
-	  - read_proc_partitions use fake {start}s so that the empty space is
-	computed ok by get_normal_parts_and_holes
-	  - verifyHds doesn't exist anymore
-	  - part of it is in hds() using compare_with_proc_partitions() and
-	use_proc_partitions()
-	  - part of it is in install_any::getHds
-
-	* any.pm: set password2 to password so that upgrading bootloader with an
-	existing password works (thanks to Aleksander Adamowski)
-	add ntools and ctools in %high_security_groups
-
-	* install_interactive.pm: handle "readonly" flag per hard drives instead
-	of a global one
-
-	* standalone/diskdrake: use function fsedit::get_hds which handles errors
-
-	* install_any.pm, install_steps_interactive.pm: remove/simplify error
-	hanling (most of it is moved to fsedit.pm)
-
-	* partition_table.pm: 
-	  - do not handle clearall in read()
-	  - ensure not partition table in written when "readonly" (it must not
-	happen, but just in case)
-
-	* diskdrake/hd_gtk.pm: nicer error message when no devices are available
-	(esp. for standalone)
-
-2002/08/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: catalog restore via HD, CD, tape & network
-
-2002/08/27  siegel
-
-	* share/po/de.po: updates
-	updates
-
-2002/08/27  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: 
-	  - Bug fix: s/detect_devices::getSNMPModel/printer::getSNMPModel/
-	  - Added support for the photo card reader in the HP PSC 2200 series.
-	Make number of MB to install in first time dialog changeable without
-	breaking the translations.
-
-	* printer.pm: Set default text margins to half an inch and default size
-	for images
-	to be printed to the full page.
-
-2002/08/26  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/monitor.pm: fix 2 occurences of use of $monitors as a hash
-	(thanks to Nora Etukudo)
-
-	* bootloader.pm: correctly handle empty and commented lines in lilo.conf
-
-	* mouse.pm: create /dev/usbmouse symlink for non devfs use
-
-	* detect_devices.pm: dev_is_devfs always return false during install
-
-2002/08/26  Till Kamppeter  <till@mandrakesoft.com>
-
-	* standalone/printerdrake: 
-	  - Ask user whether he really wants to set up printing when he starts
-	Printerdrake for the first time.
-	  - Added titles ("Printerdrake") to all wait messages.
-
-	* printerdrake.pm: Button to close Printerdrake shows "Done" during
-	installation and in MCC and "Quit" in standalone mode.
-	  - Ask user whether he really wants to set up printing when he starts
-	Printerdrake for the first time.
-	  - Added titles ("Printerdrake") to all wait messages.
-
-2002/08/26  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/ethernet.pm: 
-	  - fix previous button behavior in Proxies configuration
-
-2002/08/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: avoid using serial_probe on non terminal device
-	(ttyxx or ttySxx).
-
-2002/08/26  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: autoselection of tamil fonts when tamil locale is chosen
-
-	* lang.pm: Now console fonts (at least those used by DrakX) include an sfm
-	map;
-	no need to provide one.
-	small fix (ta->ta_IN)
-
-	* share/po/zh_CN.po: updated Chinese file
-
-2002/08/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix deleting previous report.bug when upgrading
-	revert (not needed by gnome-panel)
-	move modules::write_pcmcia before install packages
-
-	* Xconfig/monitor.pm: fix 2 occurences of use of $monitors as a hash
-	(thanks to Nora Etukudo)
-
-	* bootloader.pm: correctly handle empty and commented lines in lilo.conf
-
-	* mouse.pm: create /dev/usbmouse symlink for non devfs use
-
-	* network/shorewall.pm: ensure net_interface is found in any case
-
-	* fsedit.pm: increase maxsize for / (partitioning with /usr) since it
-	contains /tmp and /opt (as requested by Arnaud de Lorbeau)
-
-	* detect_devices.pm: dev_is_devfs always return false during install
-
-	* fs.pm (prepare_write_fstab): use mkdir_p instead of mkdir to handle
-	mount points like /mnt/foo/bar (bug reported by David Eastcott)
-
-2002/08/26  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: Dialog for printing test pages: Unmark all test pages when
-	"No test
-	pages" is marked.
-	Accelerated printing of the photo test page when CUPS is the spooler,
-	the internal image converter of CUPS is faster than ImageMagick.
-
-	* printerdrake.pm: Dialog for printing test pages: Unmark all test pages
-	when "No test
-	pages" is marked.
-	Accelerated printing of the photo test page when CUPS is the spooler,
-	the internal image converter of CUPS is faster than ImageMagick.
-	Hide buttons to choose network printer auto-detection in the add printer
-	wizard when there is no local network (recommended mode).
-	Let "samba-client" only be installed when really needed.
-
-2002/08/26  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm: 
-	  - lots of cleanups
-	  - documente gtkcreate_png()
-	  - fix Gdk::DrawingArea usage in gtkpng_pixbuf()
-	  - common bring MDK::Common::Math for us
-	  - globalize state (aka highlith icon or not)
-	code is much more understandable now
-	instead of creating a global callback for repainting exposing widgets,
-	all Gdk::DrawingArea'll come from gtkpng_pixbuf() whose code is 80 %
-	the redrawing callback
-
-2002/08/25  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Suggest "OpenOffice.org" instead of "openoffice"
-	  - First attempt to get localized installations of OOo
-
-2002/08/25  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/es.po, share/po/da.po: updated Danish and Spanish files
-
-2002/08/25  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakautoinst: fixe explanation use
-
-2002/08/24  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-	* lang.pm: ichanged kde default fonts to match what we ship
-
-2002/08/24  Till Kamppeter  <till@mandrakesoft.com>
-
-	* detect_devices.pm, printer.pm, printerdrake.pm: Let command line tools
-	for network scanning run under "chroot $refix", otherwise they take ages
-	during installation.
-	Moved network scanning functions from "detect_devices.pm" to
-	"printer.pm" so that they have access to the "$prefix" variable.
-
-2002/08/23  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po, share/po/hu.po: updated Hungarian and Chinese files
-
-2002/08/23  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/xfree4.pm: fix "screen1 RightOf screen2", it must be "screen2
-	RightOf screen1"
-
-	* network/netconnect.pm (read_raw_net_conf): new function to access
-	/etc/sysconfig/drakconnect and /etc/sysconfig/drakconnect.$type ensuring
-	migration from /etc/sysconfig/draknet and /etc/sysconfig/draknet.$type
-
-	* network/shorewall.pm: remove debug code
-
-	* Xconfig/card.pm: 
-	  - fix setting "Screen <number>" for multi-head cards
-	  - don't propose XFree3 when using multi-head
-
-	* standalone.pm: add modules network::tinyfirewall and network::shorewall
-
-	* interactive.pm: when standalone, use the name of the program for the
-	window title
-
-	* Xconfig/xfreeX.pm (set_resolution): set the resolution on all Screen
-	sections (otherwise Xinerama fails (?))
-
-2002/08/23  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: combine file browser subs into generic routine
-	catalog restore - check restore media params - verify media
-	reworked failure to find restore path treatment
-	  - now user gets option to reselect dir, install
-	   media, or use the catalog browser for
-	   unmountable media
-	 - fix eject media typo
-	 - create/read tape label for catalog
-	 - more GUI crash fixes
-	 - catalog browser - can select session or
-	   individual files for restore - needs backend
-	 - merge with other CVS changes, some language fixes
-
-2002/08/23  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm: 19mdk
-	  - ugtk:
-	o switch from imlib to gdk-pixbuf
-		o kill gtkcreate_imlib()
-		o big cleanup by the way
-		o support alpha blender [not complete]
-		o fix mem leak
-		o remove dynamic support of imlib||gdk-pixbuf since:
-		  * gtk2 require gdk-pixbuf anyway
-		  * imlib sucks
-		  * less code/libs in install
-	    o kill unused cursors
-	    o kill icon flashing
-	    o gtkcreate_png_pixbuf() : load a png into a pixbuf
-	    o gtkpng_pixbuf() : render a pixbuf into a drawable
-	    o simplify gtkcreate_png(): render a pixbuf into a pixmap and an
-	      alpha bitmap
-	    o add2notebook() : simplify
-	fix 95% of mcc memory leaks
-	  - ugtk:
-	     o switch from imlib to gdk-pixbuf
-		o kill gtkcreate_imlib()
-		o big cleanup by the way
-		o support alpha blender
-		o fix mem leak
-		o remove dynamic support of imlib||gdk-pixbuf since:
-		  * gtk2 require gdk-pixbuf anyway
-	    o kill unused cursors
-	    o kill icon flashing
-	    o gtkcreate_png_pixbuf() : load a png into a pixbuf
-	    o gtkpng_pixbuf() : render a pixbuf into a drawable
-	    o simplify gtkcreate_png(): render a pixbuf into a pixmap and an
-	      alpha bitmap
-	    o add2notebook() : simplify
-	  - harddrake:
-	    o bump version number
-
-	* standalone/draksound: use right sound-slot
-
-	* share/po/fr.po: s/p,bi(Bph,bi(Briques/p,bi(Briph,bi(Briques/
-
-	* network/netconnect.pm, standalone/drakgw: florin fixes for multiple NIC
-	boxes
-
-	* harddrake/sound.pm: 20mdk:
-	  - florin fixes for firewalling
-	  - check that alternative is unknown, not the current driver, before
-	saying that there's no alternative.
-	  anyway, our only caller cannot get there's with a current unknown
-	  driver since he only try listed/know drivers ....
-	19mdk
-	use right sound-slot
-	check that alternative is unknown, not the current driver, before
-	saying that there's no alternative.
-	anyway, our only caller cannot get there's with a current unknown
-	driver since he only try listed/know drivers ....
-
-	* drakxtools.spec: 20mdk:
-	  - florin fixes for firewalling
-	  - check that alternative is unknown, not the current driver, before
-	saying that there's no alternative.
-	  anyway, our only caller cannot get there's with a current unknown
-	  driver since he only try listed/know drivers ....
-	19mdk
-	  - ugtk:
-	     o switch from imlib to gdk-pixbuf
-		o kill gtkcreate_imlib()
-		o big cleanup by the way
-		o support alpha blender [not complete]
-		o fix mem leak
-		o remove dynamic support of imlib||gdk-pixbuf since:
-		  * gtk2 require gdk-pixbuf anyway
-		  * imlib sucks
-		  * less code/libs in install
-	    o kill unused cursors
-	    o kill icon flashing
-	    o gtkcreate_png_pixbuf() : load a png into a pixbuf
-	    o gtkpng_pixbuf() : render a pixbuf into a drawable
-	    o simplify gtkcreate_png(): render a pixbuf into a pixmap and an
-	      alpha bitmap
-	    o add2notebook() : simplify
-	18mdk
-	  - ugtk:
-	     o switch from imlib to gdk-pixbuf
-		o kill gtkcreate_imlib()
-		o big cleanup by the way
-		o support alpha blender
-		o fix mem leak
-		o remove dynamic support of imlib||gdk-pixbuf since:
-		  * gtk2 require gdk-pixbuf anyway
-	    o kill unused cursors
-	    o kill icon flashing
-	    o gtkcreate_png_pixbuf() : load a png into a pixbuf
-	    o gtkpng_pixbuf() : render a pixbuf into a drawable
-	    o simplify gtkcreate_png(): render a pixbuf into a pixmap and an
-	      alpha bitmap
-	    o add2notebook() : simplify
-	  - harddrake:
-	    o bump version number
-
-2002/08/23  Warly  <warly@mandrakesoft.com>
-
-	* share/logo-mandrake.png: beta 4 logo
-
-2002/08/22  Pablo Saratxaga  <pablo@mandrakesoft.com>
-
-	* share/po/ca.po, share/po/hu.po: updated Hungarian file
-
-2002/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* network/shorewall.pm: make perl_checker happy
-	use $::prefix to access shorewall config files
-	  - add network::shorewall
-	  - add tinyfirewall during install
-
-	* standalone/tinyfirewall: complete rewrite
-
-	* network/netconnect.pm, tinyfirewall.pm, network/tinyfirewall.pm: 
-	  - add network::shorewall
-	  - add tinyfirewall during install
-
-	* pixmaps/monitor-1152.png, pixmaps/monitor-1920.png,
-	pixmaps/monitor-1400.png, pixmaps/monitor-2048.png,
-	pixmaps/monitor-1600.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* standalone/drakgw: use shorewall (need testing)
-
-2002/08/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: uniformize real names
-
-2002/08/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed stupid typo for bestKernelPackage.
-	added return for bestKernelPackage ;-)
-
-2002/08/21  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* bootlook.pm: add link to draksplash
-
-	* standalone/draksplash: remove warnings
-
-2002/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: updated po file
-
-2002/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: put back loadkeys_files which *is* used (by
-	make_rescue_img)
-
-2002/08/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated po file
-
-	* keyboard.pm, share/keyboards.tar.bz2: merged keyboards with XFree86
-
-2002/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: fix pablo... uh no, too hard. fix his typo instead ;p
-
-	* drakxtools.spec: 
-	  - fix dangling waiting watch mousecursor (well, please test!)
-	  - adding draksplash (nathan)
-
-	* my_gtk.pm: 
-	  - in destroy, detect if program is going to leave, in that case
-	don't do anything, especially don't set the waiting mouse cursor
-	another thing is that calling flush() at this moment causes segfault
-	so don't do it and no more segfault :)
-	(now, if someone finds out what this 4 is about... but you cares, it
-	works :)
-	this fixes program ending on an exception
-	  - also add END() calling exit() (in case a program forgets to (heurk)
-	call exit())
-
-2002/08/20  alus
-
-	* share/po/pl.po: Upper Case
-	updated translation
-
-2002/08/20  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/adsl.pm: o ECI adsl config fix
-
-2002/08/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: make sure kernel is selected during upgrade.
-
-	* pkgs.pm: fixed ldconfig not visible in packages tree.
-	fixed ldconfig not selected for installation.
-	added bestKernelPackage.
-
-2002/08/20  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* standalone/draksplash: a tool for bootsplash theme creation
-
-	* drakxtools.spec: adding draksplash
-
-	* Makefile.config: adding draksplash in STANDALONEPMS_
-
-2002/08/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2, keyboard.pm: merged keyboards with XFree86
-
-	* share/po/ta.po, share/po/hu.po: updated po file
-	updated pot file
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/cs.po,
-	share/po/bg.po, share/po/el.po: updated pot file
-
-	* lang.pm: Removed fallback languages for "bs" (there are enough native
-	translations now)
-
-2002/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm: 
-	  - in destroy, detect if program is going to leave, in that case
-	don't do anything, especially don't set the waiting mouse cursor
-	another thing is that calling flush() at this moment causes segfault
-	so don't do it and no more segfault :)
-	(now, if someone finds out what this 4 is about... but you cares, it
-	works :)
-	this fixes program ending on an exception
-	  - also add END() calling exit() (in case a program forgets to (heurk)
-	call exit())
-
-	* share/keymaps.tar.bz2: update to correspond to keyboard.pm
-
-	* mouse.pm: fix the use of create_okcancel
-
-	* keyboard.pm: fix pablo... uh no, too hard. fix his typo instead ;p
-	  - drop the loadkeys_files (it is unused)
-	  - add more precise check of the existence of .bkmap's and that
-	share/keymaps.tar.bz2 is up to date
-
-	* install_steps_interactive.pm: firewire configuration is only automatic
-	add firewire controller configuration
-
-	* standalone/drakbackup: fix $'s in i18n'ed strings
-
-	* standalone/XFdrake: when restarting X, don't kill kdm/gdm/xdm, they
-	don't need this (worse, they don't respawn)
-
-	* install_steps.pm, modules.pm: add firewire controller configuration
-
-	* drakxtools.spec: 
-	  - fix dangling waiting watch mousecursor (well, please test!)
-	  - adding draksplash (nathan)
-
-2002/08/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: remove unused subs
-	disable forced "backup before restore" that erases previous backup
-	more work towards tracking backed up files for future recovery
-
-2002/08/20  Till Kamppeter  <till@mandrakesoft.com>
-
-	* standalone/scannerdrake: 
-	  - Let all occurences of "Seiko Epson" replaced by "Epson" both in the
-	scanner names read from the ScannerDB and in the names resulting from
-	scanner auto-detection (names from usbtable). So the user gets
-	presented "Epson" and usbtable can have "Epson" names where ScannerDB
-	can have "Seiko Epson" names.
-	  - If a scanner is listed as "unsupported" in ScannerDB, the user gets
-	a message instead of scannerdrake silently exiting.
-	Fixed parantheses of a "member" function, fixed typos.
-
-	* scanner.pm: 
-	  - Let all occurences of "Seiko Epson" replaced by "Epson" both in the
-	scanner names read from the ScannerDB and in the names resulting from
-	scanner auto-detection (names from usbtable). So the user gets
-	presented "Epson" and usbtable can have "Epson" names where ScannerDB
-	can have "Seiko Epson" names.
-	  - If a scanner is listed as "unsupported" in ScannerDB, the user gets
-	a message instead of scannerdrake silently exiting.
-
-	* printer.pm: Taken LPRng from spooler menu in printerdrake.
-
-2002/08/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/logdrake: s/one of the selected service/one of the selected
-	services/
-	(spoted by Arpad Biro)
-
-	* standalone/draksound: 
-	  - simplify
-	  - allocate sound slots in the same order as install2.pm (aka in
-	modules::probe_category('multimedia/sound') order)
-	add draksound: allow to switch between alsa and oss;
-	should result in better sound support
-
-	* harddrake/TODO: instead of generating my own list of module descriptions
-	from
-	list_modules.pm list of sound modules, just
-	usemodules::category2modules_and_description
-
-	* standalone/service_harddrake: 
-	  - kill dead code
-	  - more use of MDK::Common
-	  - use draksound wizard
-	  - boot: only check for removed/added disks, video card, ethernet
-	devices and mouse
-
-	* ugtk.pm: kill debugging prints
-
-	* help.pm: s/enter a disk/insert a disk/ (Arpad Biro)
-
-	* standalone/drakbackup: typo fixed seen by Arpad Biro:
-	s/durind/during/
-	s/an user/a user/
-	s/select select/select/
-	s/propogate/propagate/
-
-	* harddrake/data.pm: 
-	  - use draksound wizard
-	  - boot: only check for removed/added disks, video card, ethernet
-	devices and mouse
-	don't put dvd burners in both dvd and burners classes but only in
-	burners
-
-	* harddrake/Makefile, harddrake/gen_snd_list, harddrake/sound.pm: instead
-	of generating my own list of module descriptions from
-	list_modules.pm list of sound modules, just
-	usemodules::category2modules_and_description
-	add draksound: allow to switch between alsa and oss;
-	should result in better sound support
-
-	* docs/Partition-ends-after-end-of-disk.txt: typo fix
-
-	* bootlook.pm: s/mkinird/mkinitrd/ (Arpad Biro)
-
-2002/08/19  alus
-
-	* share/po/pl.po: one fix
-
-2002/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.config: remove dir security
-
-	* interactive/gtk.pm: use my_gtk {isWizard} and {isEmbedded} which are
-	more accurate than
-	$::isWizard && !$my_gtk::pop_it and $::isEmbedded && !$my_gtk::pop_it,
-	since
-	when the Plug is full, the window is not embedded.
-
-	* fs.pm: fix checking the return value of fsck.jfs
-
-	* my_gtk.pm: in my_gtk object, set {isEmbedded} if embedded and {isWizard}
-	if displayed wizard mode
-
-	* Xconfig/monitor.pm (readMonitorsDB): now return a list instead of a hash
-	to handle same name entries with different EISA_ID
-	(configure_automatic): handle EISA_ID but no VertRefresh/HorizSync
-	(happens for some hardware)
-	(choose): handle user asking for "Plug'n Play" monitor and ddcxinfos
-	failing
-
-	* Xconfig/main.pm: replace "xxx => eval { }" with "xxx => scalar eval {}"
-
-2002/08/19  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* modules.pm: typo fix spoted by Arpad Biro
-
-	* standalone/drakbackup: s/progess/progress/ (Arpad Biro)
-
-2002/08/19  alus
-
-	* share/po/pl.po: one fix
-
-2002/08/19  Christian Belisle  <cbelisle@mandrakesoft.com>
-
-	* standalone/draksec: 
-	  - draksec is now in his own package
-
-2002/08/19  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/network.pm: o remove old /etc/hosts entries for the hostname
-	before adding new one
-
-2002/08/19  fcrozat
-
-	* share/rpmsrate: Make sure nautilus-gtkhtml is installed by default for
-	GNOME
-
-2002/08/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ta.po: Added Tamil file
-
-	* share/po/pt.po: updated Portuguese file
-
-2002/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.config: remove dir security
-
-	* proxy.pm: add $Id: ChangeLog,v 1.1039 2005/04/12 13:43:17 prigaux Exp $
-
-	* interactive/gtk.pm: use my_gtk {isWizard} and {isEmbedded} which are
-	more accurate than
-	$::isWizard && !$my_gtk::pop_it and $::isEmbedded && !$my_gtk::pop_it,
-	since
-	when the Plug is full, the window is not embedded.
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): ensure mount fail doesn't
-	cause any pb
-
-	* detect_devices.pm: add scsi Optical Device recognition (thanks to
-	Michael Riss)
-	(without this, a hard drive following the optical device gets assigned
-	sda
-	whereas sda is the optical device and the hard drive really is sdb)
-
-	* fs.pm: fix checking the return value of fsck.jfs
-
-	* my_gtk.pm: in my_gtk object, set {isEmbedded} if embedded and {isWizard}
-	if displayed wizard mode
-
-	* Xconfig/monitor.pm (readMonitorsDB): now return a list instead of a hash
-	to handle same name entries with different EISA_ID
-	(configure_automatic): handle EISA_ID but no VertRefresh/HorizSync
-	(happens for some hardware)
-	(choose): handle user asking for "Plug'n Play" monitor and ddcxinfos
-	failing
-
-	* Xconfig/main.pm: replace "xxx => eval { }" with "xxx => scalar eval {}"
-
-2002/08/19  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: s/drakconnet/drakconnect/ (Thank you for adding this
-	bug, Titi)
-
-2002/08/19  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* modules.pm: add remove_modules
-
-2002/08/18  alus
-
-	* share/po/pl.po: updated translation
-
-2002/08/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: updated Catalan file
-
-	* share/po/id.po, share/po/da.po: updated Danish and Indonesian files
-
-	* share/po/cs.po, share/po/hu.po: updated Czech and Hungarian files
-
-2002/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: since lba32 is the default in lilo.conf
-	  - write "geometric" when lba32 is not set
-	  - don't write lba32 (useless)
-
-2002/08/18  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Fixed HP multi-function device
-	configuration during the installation:
-	  - Fixed mistyped package name for "mtoolsfm"
-	 - Set links for photo card reader auto-detection to work
-
-2002/08/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po,
-	share/po/br.po, share/po/th.po, share/po/no.po, share/po/et.po,
-	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
-	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po,
-	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/cy.po,
-	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po,
-	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
-	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/vi.po, share/po/fr.po, share/po/it.po, share/po/nl.po,
-	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
-	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po,
-	share/po/hu.po: updated po files
-
-2002/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/card.pm: 
-	  - allow to change the detected card
-	  - the chosen card can be used for dualhead if it is dualhead
-
-	* Xconfig/resolution_and_depth.pm: sort resolutions to default to
-	1280x1024 instead of 1280x960
-	if the monitor size is not given, default to 14'
-
-	* any.pm (devfssymlinkf): use "mksymlink" instead of "symlink" so that
-	devfsd doesn't give an error when the symlink already exists
-
-	* Xconfig/proprietary.pm: 
-	  - fix module not returning true
-	  - don't install_matrox_hal when testing
-
-	* Xconfig/main.pm: ensure the chosen resolution is maintained unchanged
-	when changing the graphic
-	card or monitor.
-
-2002/08/17  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: Fixes to make it possible toinstall HP's multi-function
-	devices during installation.
-
-	* scanner.pm: Let a newline character be put after the entry in
-	/etc/sane.d/dll.conf, so more than one driver name can be added
-	without all of them going into one line and then being unreadable.
-
-2002/08/16  alus
-
-	* share/po/pl.po: updated
-
-2002/08/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/sl.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/sk.po: updated Slovak file
-
-	* share/po/da.po, share/po/ko.po: updated Danish and Korean files
-
-2002/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix "Security Administrator (login or email)" missing field
-
-	* interactive/newt.pm: fix dialog box with empty buttons (thanks to
-	Hamster <hamster@hamsternet.org>)
-
-	* Xconfig/test.pm: raise the testing time from 8 to 12 seconds
-
-	* my_gtk.pm (create_okcancel): do not display "Cancel" when {cancel} is
-	empty string
-
-	* bootloader.pm (add_entry): new entry will now keep its label, the
-	conflicting one will be renamed "old_xxx" (and not the opposite)
-
-	* diskdrake/interactive.pm: limit max size of loopback to 2GB on FAT
-
-2002/08/16  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: insert a space between "field:" and "description"
-
-	* harddrake/v4l.pm, harddrake/bttv.pm, standalone/drakxtv,
-	install_steps_interactive.pm: 
-	  - harddrake::bttv is renamed harddrake::v4l
-	  - harddrake::v4l handle saa7134 too now (and not only bttv)
-	  - harddrake::v4l::config need a new driver parameter in order to be
-	able to offer the right cards and tuners list
-	  - drakxtv: kill some old comments
-	  - add the list of cards supported by saa7134
-	  - add a not to remember a potentiel speedup
-
-2002/08/15  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - add --incident : could be used by signal catcher to launch drakbug
-	when app crash
-
-	* standalone/drakautoinst: 
-	  - explanations
-
-2002/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/da.po, share/po/DrakX.pot, share/po/fr.po,
-	share/po/fi.po, share/po/de.po: updated Danish and Hungarian files
-
-	* share/po/zh_CN.po, share/po/gl.po, share/po/ga.po: updated Chinese file
-
-	* share/po/hu.po: updated Chinese and hungarian files
-	updated Danish and Hungarian files
-
-	* share/po/zh_TW.po: updated Chinese and hungarian files
-	updated Chinese file
-
-2002/08/15  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: Allow non-root user to use program with personal
-	config.
-	Finish multisession support.
-	Fix various crash scenarios in GUI in restore mode.
-	Fix user restore mode to restore only what is requested.
-	View archive contents before restore, user & sys mode.
-	Add explanation of config file options for non-X users.
-
-2002/08/14  alus
-
-	* share/po/pl.po: updated translation
-
-2002/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po, share/po/da.po: updated Catalan, Danish and Turkish
-	files
-	updated some po files
-
-	* share/po/et.po, share/po/eu.po, share/po/es.po, share/po/eo.po,
-	share/po/el.po: updated Vietnamese file
-
-	* share/po/id.po, share/po/no.po, share/po/ja.po, share/po/hr.po,
-	share/po/mt.po, share/po/ko.po, share/po/DrakX.pot, share/po/lt.po,
-	share/po/cy.po, share/po/ar.po, share/po/wa.po, share/po/is.po,
-	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
-	share/po/it.po, share/po/nl.po, share/po/de.po, share/po/cs.po,
-	share/po/lv.po, share/po/hu.po: updated some po files
-
-	* share/po/sp.po: Updated Slovak file
-	updated some po files
-
-	* share/po/vi.po: updated Vietnamese file
-	updated some po files
-
-	* share/po/th.po, share/po/tr.po: updated Catalan, Danish and Turkish
-	files
-
-	* share/po/ru.po, share/po/pt_BR.po, share/po/ro.po, share/po/pt.po:
-	updated po files
-
-	* share/po/sk.po, share/po/br.po, share/po/sl.po, share/po/be.po,
-	share/po/uk.po, share/po/sv.po, share/po/sr.po, share/po/bs.po,
-	share/po/bg.po: Updated Slovak file
-
-2002/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: reduce the width of install window
-
-	* bootloader.pm: fix "You can't install the bootloader on a xfs partition"
-	happening in weird cases (thanks to Alan Hughes)
-
-	* standalone/diskdrake: disable embedding of WebDAV configuration since it
-	is broken
-	$all_hds->{hds} must be filled in any case, not only in --hd
-
-2002/08/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: undo advanced_what_user I broke perl_checking
-	multisession CD support
-
-2002/08/14  Warly  <warly@mandrakesoft.com>
-
-	* share/compssUsers.server: add LSB group
-
-2002/08/13  alus
-
-	* share/po/pl.po: 2 strings overlapped each other
-
-2002/08/13  Pixel  <pixel@mandrakesoft.com>
-
-	* network/dav.pm: nothing useful for the moment
-	use ensure_is_installed
-
-	* interactive/gtk.pm: handle the setting of 'ok' and 'cancel'
-
-	* diskdrake/dav.pm: add checking davfs is installed
-	rough WebDAV gui
-
-	* standalone.pm: add ensure_is_installed (which was
-	network::smbnfs::check_raw and is often useful)
-
-	* standalone/diskdrake, diskdrake/interactive.pm: rough WebDAV gui
-
-	* network/smbnfs.pm, network/smb.pm, network/nfs.pm: use
-	ensure_is_installed
-
-2002/08/13  siegel
-
-	* share/po/de.po: updates
-
-2002/08/13  alus
-
-	* share/po/pl.po: 2 strings overlapped each other
-	updated translation
-
-2002/08/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed stupid typo.
-	allow selecting a choice package according to locales-xx found.
-
-	* crypto.pm: added a true value.
-
-	* share/rpmsrate: removed duplicate aspell-xx as DrakX will take care of
-	them now.
-
-2002/08/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/gen_locales.sh: corrected erros that made the script fail
-
-	* share/po/eu.po, share/po/es.po, share/po/DrakX.pot, share/po/ru.po,
-	share/po/ro.po, share/po/pl.po, share/po/gl.po, share/po/fi.po,
-	share/po/pt_BR.po, share/po/et.po, share/po/zh_TW.po, share/po/eo.po,
-	share/po/pt.po, share/po/el.po, share/po/fr.po, share/po/ga.po: updated
-	Portuguese and Chinese files
-
-	* share/po/zh_CN.po: updated Chinese file
-	updated Portuguese and Chinese files
-
-2002/08/13  Pixel  <pixel@mandrakesoft.com>
-
-	* drakxtools.spec: require latest perl-MDK-Common
-
-	* interactive.pm: remove completly setting 'ok' & 'cancel' since it's
-	better done per
-	interactive::* to handle correctly the Wizard mode
-	button "Previous" and "Next" are not only there in interactive::gtk
-
-	* standalone.pm: add ensure_is_installed (which was
-	network::smbnfs::check_raw and is often useful)
-
-	* fsedit.pm, fs.pm: backend davfs (WebDAV) support
-
-	* interactive/gtk.pm: handle the setting of 'ok' and 'cancel'
-
-	* interactive/http.pm, interactive/stdio.pm, interactive/newt.pm: 
-	  - handle setting 'ok' && 'cancel'
-	  - handle isWizard in newt (basic handling)
-
-	* diskdrake/dav.pm: add checking davfs is installed
-	rough WebDAV gui
-
-	* Xconfig/main.pm (export_to_install_X): if monitor is p'n'p, don't save
-	it for auto_install
-
-	* network/dav.pm: nothing useful for the moment
-	use ensure_is_installed
-	backend davfs (WebDAV) support
-
-	* standalone/diskdrake: rough WebDAV gui
-
-	* network/smbnfs.pm, network/smb.pm, network/nfs.pm: use
-	ensure_is_installed
-
-	* diskdrake/interactive.pm: rough WebDAV gui
-	backend davfs (WebDAV) support
-
-2002/08/13  siegel
-
-	* share/po/de.po: updates
-
-2002/08/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: harddrake-ui doesn't have to provides kudzu
-
-	* standalone/drakxtv: add "Australian Optus cable TV" support (need xawtv
-	<= 3.76)
-
-	* standalone/service_harddrake: check the config file isn't empty
-
-2002/08/12  alus
-
-	* share/po/pl.po: spell checking
-	updated translation
-
-2002/08/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: allow removing packages on upgrade.
-
-	* pkgs.pm: fixed stupid change (almost hope it was really changes).
-	fix to reduce size of already installed packages.
-
-	* install_steps_interactive.pm: synced to force calling
-	selectPackagesAlreadyInstalled in order to have
-	installed and upgrade computed (necessary to known if a package is
-	already
-	installed or will be upgradable to compute size more precisely).
-
-2002/08/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/et.po, share/po/zh_TW.po, share/po/vi.po,
-	share/po/eu.po, share/po/uk.po, share/po/es.po, share/po/eo.po,
-	share/po/el.po: updated po files
-
-	* share/po/zh_CN.po: updated Chinese file
-	updated po files
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2, share/Makefile:
-	locale name <-> charset correspondances better matching what DrakX uses
-
-	* share/po/bs.po, share/po/br.po, share/po/be.po, share/po/cy.po,
-	share/po/ca.po, share/po/cs.po, share/po/bg.po: updated Chinese file
-
-2002/08/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone.pm: 
-	  - add setExportedVarsInSh and setExportedVarsInCsh
-	  - remove setVarsInCsh (obsoleted by setExportedVarsInCsh)
-
-	* bootloader.pm: fix typo
-
-	* interactive.pm: don't switch to 2 buttons dialog box if the labels are
-	too long in ask_from_list
-	(otherwise it's ugly (reported for XFdrake multi-head choice with 67 &
-	58
-	chars strings) (fix bug #62)
-
-	* Xconfig/xfreeX.pm: create a backup of XF86Config (XF86Config.old)
-
-	* any.pm: use setExportedVarsInSh for setting /etc/profile.d/proxy.sh so
-	that http_proxy
-	and ftp_proxy are exported (thanks to Pascal <pascal@vmfacility.fr>)
-
-	* keyboard.pm, network/network.pm, install_steps.pm: 
-	  - fix reading previous keyboard config on upgrade (for displaying in
-	summary)
-	  - ensure keyboard and mouse configuration are not overwritten if not
-	explictly modified on upgrade
-	  - propagate pci=xxx at install to bootloader (since "pci=bios,biosirq"
-	is needed on some box, see http://islay.dyndns.org/taz/index.html for
-	more)
-
-	* proxy.pm: allow ftp_proxy beginning with http: (thanks to Christophe
-	Combelles)
-
-	* install2.pm: 
-	  - fix reading previous keyboard config on upgrade (for displaying in
-	summary)
-	  - ensure keyboard and mouse configuration are not overwritten if not
-	explictly modified on upgrade
-	  - propagate pci=xxx at install to bootloader (since "pci=bios,biosirq"
-	is needed on some box, see http://islay.dyndns.org/taz/index.html for
-	more)
-	use $::prefix
-
-	* mouse.pm, Xconfig/default.pm: use $::prefix
-
-	* bootlook.pm: fix embedding
-
-2002/08/12  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* ugtk.pm: consolidate create_factory_menu
-	  - ugtk::gtkexpand : new function
-	  - harddrake::ui : uses it
-	write_on_pixmap: kill unused variable
-	tree_set_icon: new function
-	create_okcancel isn't in ugtk so don't export it (warning fix)
-
-	* harddrake/ui.pm: print fields values in blue, paint unknown module in
-	red
-	consolidate create_factory_menu
-	  - on exit, kill the running configurator if any
-	  - modules::get_parameters : consolidate some code
-	  - harddrake::ui : uses it
-	  - ugtk::gtkexpand : new function
-	  - harddrake::ui : uses it
-	  - perl_checker fix
-	  - simplifications
-	  - put signals ids in %IDs
-	  - consolidate duplicated disconnection code into disconnect
-	tree_set_icon: new function
-
-	* modules.pm: 
-	  - modules::get_parameters : consolidate some code
-	  - harddrake::ui : uses it
-
-	* scanner.pm: update TODO list
-
-	* harddrake/TODO: 
-	  - on exit, kill the running configurator if any
-
-2002/08/12  Warly  <warly@mandrakesoft.com>
-
-	* share/compssUsers: update LSB text
-
-	* share/logo-mandrake.png: logo for beta 3
-
-	* share/rpmsrate: remove useless 2 GNOME
-
-2002/08/11  alus
-
-	* share/po/pl.po: updated
-
-2002/08/11  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table/raw.pm: add Acronis bootloader magic
-
-	* share/rpmsrate: adding aspell-LANGS before evolution to workaround the
-	choices limitation (=> allow to choose the right aspell-LANG)
-
-	* docs/comparisons: comprehensive feature-to-feature comparison with
-	redhat 8.0
-
-	* diskdrake/interactive.pm: allow to enter any mount point even in
-	non-expert (why was it still the other way??)
-
-	* drakxtools.spec: add "PreReq: rpm-helper" in drakxtools-http as advised
-	by rpmlint
-
-	* bootloader.pm: 
-	  - compare_entries is now called same_entries
-	  - same_entries try hard to return true even if the files not the same
-	but symlinks to the same file
-	  - rework add_entry (it handles weird case which used to give old_linux
-	and old2_linux even if they are the same)
-	  - ensure the old failsafe entry doesn't give any old_failsafe
-
-2002/08/11  alus
-
-	* share/po/pl.po: updated
-
-2002/08/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/sk.po,
-	share/po/sp.po, share/po/af.po, share/po/sl.po, share/po/az.po,
-	share/po/hr.po, share/po/ar.po, share/po/hu.po: updated some po files
-
-	* share/po/th.po, share/po/tr.po: updated Turkish file
-
-2002/08/11  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm: 
-	  - vg_add: do not vgremove the old_name anymore, this is dangerous and
-	should not happen
-	  - lv_create: fix bug when {primary}{normal} didn't exist
-	  - use run_program::get_stdout instead of ``
-	  - create and use run() and run_or_die() which takes care of running
-	vgscan again when needed
-	  - rename LVMname to VG_name
-
-	* diskdrake/interactive.pm: allow to enter any mount point even in
-	non-expert (why was it still the other way??)
-	rename LVMname to VG_name
-
-	* detect_devices.pm (floppies): module "floppy" can fail to insmod, in
-	that case it means
-	there's no floppy controller, so don't try fd0 & fd1 which may cause
-	havoc
-	(esp. segfault) (thanks to rcc)
-
-	* share/rpmsrate: adding aspell-LANGS before evolution to workaround the
-	choices limitation (=> allow to choose the right aspell-LANG)
-
-	* docs/comparisons: comprehensive feature-to-feature comparison with
-	redhat 8.0
-
-	* diskdrake/hd_gtk.pm, partition_table.pm: rename LVMname to VG_name
-
-	* fsedit.pm: get rid of the duplicated /tmp in for suggestions_mntpoint()
-	(thanks to Amaury)
-	  - rename LVMname to VG_name
-	  - part2hd: allow rootDevice to be a VG_name
-	  - add auto_allocate_vgs
-	cleanup
-
-	* fs.pm (prepare_write_fstab): no need to read the fstab once again before
-	writing since reading takes care of everything, including unknown
-	entries (which go to {special}). This fixes a bug when removing existing
-	partition with associated mount point. It used to keep the entry in
-	fstab, which is wrong (as reported by andr� <naderrt@wanadoo.fr>)
-
-	* modules.pm (load): when isStandalone, ignore errors when loading
-	unavailable modules (ie have the same behaviour as during install)
-
-	* run_program.pm: add get_stdout (similar to rooted_get_stdout)
-
-	* bootloader.pm: 
-	  - compare_entries is now called same_entries
-	  - same_entries try hard to return true even if the files not the same
-	but symlinks to the same file
-	  - rework add_entry (it handles weird case which used to give old_linux
-	and old2_linux even if they are the same)
-	  - ensure the old failsafe entry doesn't give any old_failsafe
-
-	* network/smb.pm: fix yet another bug regarding credentials during install
-
-	* install_steps_auto_install.pm: nice message when rebootNeeded in
-	auto_install (otherwise it reboots without prompting)
-
-2002/08/11  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Setup of HP MF devices on parallel port did
-	not work. Fixed.
-	Allow setup of MF device if device file name "/dev/printer/<number>" was
-	entered.
-	If auto-detection of model name fails, ask user always whether he has an
-	MF device.
-	If SNMP or local auto-detection fails but HPOJ auto-detection succeeds,
-	use model name found by HPOJ.
-
-2002/08/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/sv.po: updated po file
-
-2002/08/10  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm: 
-	  - fix computing the minimal size for reiserfs resizing
-	  - use run_program::run instead of system for calling resizing tools
-
-	* install_any.pm: workaround perl bug another way
-
-2002/08/10  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: GUI fixes, scp, rsync, webDAV, CD, tape support.
-	Consolidate all net methods into one configure screen.
-	Daemon mode, email fixed. Ran perl_checker and corrected.
-	GUI feedback during various backup modes and result report.
-	CD/Tape drive/media detection. Start to look at cataloging
-	runs for locating restore media.
-
-2002/08/10  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: Removed HP multi-function device configuration from SMB
-	and remote LPD printer setup.
-	Let the Sony IJP-V100 being treated as an HP multi-function device.
-	Taken into account that the HP PhotoSmart 7150 has no photo card reader.
-	Use any::get_secure_level() instead of printer::get_security_level().
-
-	* detect_devices.pm: Scanning network for printers did not work during
-	installation. Fixed.
-
-	* printer.pm: Use any::get_secure_level() instead of
-	printer::get_security_level().
-
-2002/08/09  fcrozat
-
-	* share/rpmsrate: No longer requires metacity-setup (everything can be
-	done using gnome-control-center)
-	Ensure we install enough GNOME packages when selection GNOME
-
-2002/08/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: make sure size of packages is computed.
-
-	* pkgs.pm: take care of packages already installed that will be removed
-	(untested).
-
-	* install_any.pm: fixed loadO when getFile is not used (local files).
-
-	* interactive.pm: allow cancel button even for wizard.
-
-	* install_steps_interactive.pm: small update to avoid side effect of bless
-	to HASH even if nothing results from
-	this.
-
-2002/08/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-
-	* share/po/pt.po: updated Portuguese file
-
-	* share/po/id.po, share/po/fr.po: updated French and Indonesian files
-
-2002/08/09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: fix rights on files
-
-	* tools/make_mdkinst_stage2, share/list.i386, install_any.pm: add fsck.jfs
-
-	* any.pm, modparm.pm, harddrake/ui.pm: 
-	  - fix module parameter dialog box handling
-	  - enable the cancel on load_module__ask_options
-
-	* bootloader.pm (mkinitrd): when an initrd is already there, it means an
-	initrd is needed
-	not the contrary (thanks to Damon Lynch for his test)
-
-	* install_steps.pm: remove previous report.bug.gz (otherwise one get a
-	report.bug *and* the previous report.bug.gz)
-	(report.bug's are not rotated, ddebug.log's and install.log's are)
-
-2002/08/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* modparm.pm: no need anymore to pass extra arguments for harddrake::ui
-
-	* Xconfig/various.pm: perl_checker fixes
-
-	* harddrake/TODO: module parameters're now read from /etc/modules.conf
-	before being
-	altered
-
-	* harddrake/bttv.pm: resync with bttv-0.7.95, add support for :
-	  - tv cards:
-	o Hauppauge WinTV PVR
-	  o Leadtek|WinFast VC 100
-	  - tv tuners:
-	  o LG NTSC (newer TAPC series)
-
-	* drakxtools.spec: harddrake changes
-
-	* modules.pm: mergein_conf: return options if they're set
-
-	* harddrake/ui.pm: 
-	  - module configuration window:
-	o read current options
-		o don't display ranges, we cannot really know when a range is
-	       needed and so display them in wrong cases (kill code, enable us
-	       to simplify modparm::parameters after
-		o read & parse modules.conf only when configuring the module, not
-	       on each click in the tree
-		o move up "require module" since we use it above
-		o use get_options accessor instead of direct $conf access
-		o split the options string into a hash{option => value}
-		o don't call several times interactive->vnew
-		o fix busy cursor on window exit because of the previous change
-
-2002/08/08  alus
-
-	* share/po/pl.po: various changes
-
-2002/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* services.pm (services): better sorting of services
-
-2002/08/08  alus
-
-	* share/po/pl.po: various changes
-	corrected errors
-
-2002/08/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: make sure fsck is called for ext3 partition (due to possible
-	kernel panic on
-	corrupted ext3 partition, even after mounting ext3, umounting and
-	remounting
-	ext2).
-
-2002/08/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2, keyboard.pm: Added Tamils TSCII keyboard
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/de.po,
-	share/po/eo.po, share/po/lv.po, share/po/cs.po, share/po/bg.po,
-	share/po/el.po, share/po/hu.po: updated pot file
-
-	* lang.pm: Added Tamils TSCII keyboard
-	Added some support for Tamil (proper KDE default fonts, and define it
-	as iso8859-1 encoding for kde)
-
-	* share/po/es.po: updated pot file
-	updated Spanish file
-
-2002/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: 
-	  - remove the icons in reallyChooseGroups
-	  - add the LSB group
-	  - remove buttons to change theme
-	  - add F5 to change the theme to the 'white' theme
-	  - cleanup the theme code
-	workaround a weird pb with gtk: still re-creating help Gtk::Text at each
-	step :-/
-	  - remove the "help" button
-	  - ensure the help box is not created twice (except when changing
-	theme)
-
-	* Xconfig/xfreeX.pm (set_resolution): handle the optional $resolution->{Y}
-	(@resolutions): add 1280x960
-	fix typo
-	replace 1152x768 with 1152x864 as it should and used to be
-
-	* install_steps.pm: don't add users in group usb (unneeded (?), anyway
-	doesn't do anything since group usb doesn't exist currently)
-
-	* install2.pm: 
-	  - remove buttons to change theme
-	  - add F5 to change the theme to the 'white' theme
-	  - cleanup the theme code
-
-	* services.pm (services): better sorting of services
-
-	* install_any.pm, timezone.pm: use $::prefix in timezone::read
-	timezone::read now returns a hash
-
-	* install_gtk.pm: 
-	  - remove buttons to change theme
-	  - add F5 to change the theme to the 'white' theme
-	  - cleanup the theme code
-	workaround a weird pb with gtk: still re-creating help Gtk::Text at each
-	step :-/
-	  - remove the "help" button
-	  - ensure the help box is not created twice (except when changing
-	theme)
-
-	* Xconfig/various.pm (tvout): rough default value for PAL vs NTSC
-	(configure_FB_TVOUT): add ModeLines (Florent Beranger says it displays
-	better with them)
-
-	* any.pm: 
-	  - write_passwd_user: ensure {pw} is set (at least '')
-	  - cleanup dead code
-	(ask_window_manager_to_logout): adapt to new gnome
-	sort security level descriptions
-
-	* my_gtk.pm: do not hard code icon path
-	  - remove buttons to change theme
-	  - add F5 to change the theme to the 'white' theme
-	  - cleanup the theme code
-
-	* Xconfig/card.pm, Xconfig/monitor.pm, Xconfig/main.pm: when prompting for
-	VideoRam, default to the value obtained via DDC
-
-	* Xconfig/resolution_and_depth.pm: handle the pb of resolutions where X
-	doesn't imply Y (eg: 1280x1024 and 1280x960)
-
-	* standalone/adduserdrake: 
-	  - fix detecting use of MD5 and shadow passwords
-	  - cosmetic move of any::addUsers
-
-2002/08/08  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm, install_steps_interactive.pm: Windows PDC -> Windows
-	Domain, don't make samba dirs - samba fixed now
-
-2002/08/08  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* scanner.pm: old hp scanners report themselves as "Processor"s as :
-	  - tested in hw lab
-	  - written in linux/include/scsi/scsi.h: "TYPE_PROCESSOR.*HP scanners
-	use this"
-	  - reported by sane-find-sane: "old HP scanners use the CPU id"
-
-	* detect_devices.pm: explain the fscking "Processor" need
-	old hp scanners report themselves as "Processor"s as :
-	  - tested in hw lab
-	  - written in linux/include/scsi/scsi.h: "TYPE_PROCESSOR.*HP scanners
-	use this"
-	  - reported by sane-find-sane: "old HP scanners use the CPU id"
-
-2002/08/07  Christian Belisle  <cbelisle@mandrakesoft.com>
-
-	* security/shorewall.pm: shorewall-related functions will go here.
-
-2002/08/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: added automatic update of lilo image and KDE & GNOME
-	background.
-
-	* install2.pm: allow automatic oem patch. add log if successfull patching.
-
-	* install_steps_interactive.pm: do not ask user to select ignored medium.
-
-	* crypto.pm: allow patching of mirror used.
-
-	* pkgs.pm: call rpmReadConfigFiles before installing packages.
-	do not read package of ignored medium (contrib) to save memory.
-
-	* install_any.pm: getAndSaveFile now return before writing zero-length
-	file if input file doesn't
-	exists on invocation.
-
-2002/08/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: updated Vietnamese file
-
-2002/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/card.pm: load glx in any case (well except for nvidia
-	proprietary shit)
-
-	* fs.pm: "LABEL=xxx" in fstab handling
-
-	* bootlook.pm: replace glob() with all()
-
-	* network/netconnect.pm (get_profiles): get rid of "glob", clean it up
-
-2002/08/06  alus
-
-	* share/po/pl.po: updated translation
-
-2002/08/06  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* network/tools.pm: 
-	  - set the vpi vci correctly according to selected country.
-
-2002/08/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added log to follow dead lock to check what may cause it).
-
-2002/08/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: add warly,jgotti
-
-2002/08/06  Jonathan Gotti  <jgotti@mandrakesoft.com>
-
-	* bootlook.pm: add standalone::explanations for bootsplash configuration
-
-2002/08/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: Increased the level of "yudit"; it's one of the editors
-	with best utf-8
-	support, so very useful to have.
-
-	* share/po/fr.po, share/po/wa.po: updated French and Walloon files
-	Put _() around two strings in security level choosing
-
-	* share/po/DrakX.pot: updated French and Walloon files
-
-	* any.pm, share/po/pl.po: Put _() around two strings in security level
-	choosing
-
-2002/08/06  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/xfree3.pm, Xconfig/xfreeX.pm, Xconfig/xfree4.pm,
-	Xconfig/parse.pm: make wacom config work
-
-	* bootloader.pm (get_kernels_and_labels): only take kernels for which we
-	have the corresponding /lib/modules/VERSION (otherwise mkinitrd will
-	fail)
-
-	* run_program.pm (raw): new function allowing special options like
-	{timeout}
-
-	* fsedit.pm: 
-	  - add /tmp in %suggestions for server partitioning
-	  - tweak some ratio's in %suggestions
-
-	* any.pm (ddcxinfos): use the new run_program::raw with a 20s timeout to
-	workaround ddcxinfos going wild using 100% system CPU
-
-	* detect_devices.pm, my_gtk.pm, install_any.pm: make perl_checker happy
-
-	* standalone.pm: add "use run_program" as needed
-
-2002/08/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: typo, change /etc/exports explanation in help
-
-2002/08/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/data.pm: make perl_checker happier :-)
-	  - dont detect undef devices
-	detect modem too
-	  - rename scanner::findScannerUsbport  as scanner::detect
-	as in mouse.pm
-	  - scanner::detect : detect SCSI scanners too
-
-	* drakxtools.spec: log changes
-
-	* network/modem.pm: nobody pass the second argument of
-	network::modem::modem_detect_backend() so let simplify it
-
-	* standalone/scannerdrake: 
-	  - rename scanner::findScannerUsbport  as scanner::detect
-	as in mouse.pm
-	  - scanner::detect : detect SCSI scanners too
-
-	* ugtk.pm: remove old references to rectangle drawing around mcc icons
-
-	* scanner.pm: make perl_checker happier :-)
-	  - dont detect undef devices
-	  - rename scanner::findScannerUsbport  as scanner::detect
-	as in mouse.pm
-	  - scanner::detect : detect SCSI scanners too
-
-2002/08/05  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: switch to thread-multi
-
-	* any.pm, mouse.pm: do the job of devfsd in case devfsd doesn't do it
-
-	* drakxtools.spec: rebuild for perl thread-multi
-
-	* rescue/list.sparc, rescue/list.x86_64, rescue/list.i386,
-	rescue/list.ia64, rescue/list, rescue/list.alpha, rescue/list.ppc: 
-	  - adapt to thread-multi
-	  - packdrake.pm is now out of arch dir
-
-2002/08/05  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm: smbpasswd call deferred with addToBeDone
-
-2002/08/05  alus
-
-	* share/po/pl.po: removed unused strings
-	updated translation, ugh... after second beta so much changes??
-
-2002/08/05  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/logdrake: 
-	  - do not show empty wizard when save button clicked.
-	  - cleanup (remove all sms stuffs: code and labels)
-	  - do not expand mail address
-
-2002/08/05  gbeauchesne
-
-	* Makefile: lib64 fixes
-	  - Move xf86Wacom.so modules to {i386,ppc}-specific filelist
-	  - Make filelists lib64 aware with LIB variable
-	  - Add x86_64-specific filelist
-
-	* share/list.i386, Makefile.config, share/list, share/list.x86_64,
-	share/list.ppc: 
-	  - Move xf86Wacom.so modules to {i386,ppc}-specific filelist
-	  - Make filelists lib64 aware with LIB variable
-	  - Add x86_64-specific filelist
-
-2002/08/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* drakxtools.spec: 1.1.9-5mdk
-	1.1.9-4mdk
-
-	* my_gtk.pm: the state can be XXX also in flat mode, for disabling
-	the setting of the state
-
-2002/08/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/ko.po, share/po/DrakX.pot, share/po/sr.po, share/po/pl.po,
-	share/po/fi.po, share/po/lt.po, share/po/cy.po, share/po/ca.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/vi.po, share/po/fr.po, share/po/it.po,
-	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
-	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
-	share/po/lv.po: updated pot file
-
-	* share/po/sv.po, share/po/da.po, share/po/hu.po: updated pot file
-	updated po files
-
-	* share/po/tr.po, share/po/pt.po: updated po files
-	updated pot file
-
-2002/08/05  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile: packdrake.pm is now in vendorlib
-
-	* commands.pm: make perl_checker happy
-
-	* bootlook.pm, standalone/printerdrake, standalone/draksec,
-	standalone/drakfloppy, standalone/drakxservices, standalone/drakfont,
-	standalone/drakautoinst, my_gtk.pm, standalone/drakconnect,
-	standalone/drakgw, standalone/XFdrake, standalone/tinyfirewall,
-	standalone/keyboarddrake, standalone/drakTermServ,
-	standalone/mousedrake, standalone/scannerdrake: replace "kill USR1" with
-	"kill 'USR1'" (and same for USR2)
-	(so that 'use strict' works)
-
-	* drakxtools.spec: rebuild for perl thread-multi
-
-	* diskdrake/smbnfs_gtk.pm: adapt to ugtk
-
-	* standalone.pm (install): verify at least one package is not installed
-	before displaying a
-	wait_message and calling urpmi (thanks to Jure Repinc)
-	(is_installed): use run_program and redirect stdout to dave null for
-	cleanness
-
-	* Xconfig/card.pm: fix Option's (especially for XFree3)
-	don't have Utah GLX the default. XFree4 is the default
-
-	* share/list: switch to thread-multi
-	packdrake.pm is now in vendorlib
-
-	* Xconfig/main.pm: call the "Quit" button exit during install (as
-	suggested by David Sansome)
-
-	* any.pm, mouse.pm: do the job of devfsd in case devfsd doesn't do it
-
-	* install_steps_interactive.pm: as suggested by Buchan Milne, defaults
-	LDAP Server to ldap.DOMAINNAME
-
-	* Xconfig/xfree4.pm: still have HorizSync and VertRefresh for Plug'n Play
-	monitors
-	(XFree4 still need some help)
-
-	* standalone/drakboot: replace "kill USR1" with "kill 'USR1'" (and same
-	for USR2)
-	(so that 'use strict' works)
-	a few more fixes (thanks Jure Repinc & Richard Burt)
-
-2002/08/05  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm: smbpasswd call deferred with addToBeDone
-
-2002/08/05  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: Make/Model/Driver list in expert mode: Fixed bug of
-	"recommended" driver entries getting a duplicate entry without
-	"recommended" when entering the list via double-click on existing queue
-	/ "Printer manufacturer, model, driver".
-	Finished auto-detection of network and SMB printers.
-	Added automatic configuration of HP's multi-function devices when
-	connected via HP JetDirect (network).
-
-	* printer.pm: Finished auto-detection of network and SMB printers.
-	Added automatic configuration of HP's multi-function devices when
-	connected via HP JetDirect (network).
-
-2002/08/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* modules.pm: 
-	  - export %modules::conf
-	  - kill modparm::raw_parameters and modparm::parameter_type
-	which get merged back in modparm::parameters
-	  - add more parameters to modparm::parameters for harddrake
-	 harddrake/ui.pm |   19 ++++++++++---------
-	 modparm.pm      |   33 +++++++++------------------------
-	   2 files changed, 19 insertions(+), 33 deletions(-)
-
-	* install_steps_gtk.pm, network/network.pm, log.pm, install_steps.pm,
-	interactive.pm, bootloader.pm, harddrake/data.pm, steps.pm,
-	install_steps_interactive.pm, keyboard.pm, printer.pm, lang.pm,
-	fsedit.pm, install2.pm, detect_devices.pm, common.pm, commands.pm:
-	s/__END__/1;
-	kill "wonderful perl"
-
-	* harddrake/ui.pm: 
-	  - export %modules::conf
-	  - kill modparm::raw_parameters and modparm::parameter_type
-	which get merged back in modparm::parameters
-	  - add more parameters to modparm::parameters for harddrake
-	 harddrake/ui.pm |   19 ++++++++++---------
-	 modparm.pm      |   33 +++++++++------------------------
-	   2 files changed, 19 insertions(+), 33 deletions(-)
-	no one use second paramater of raw_parameters
-	factorize some code in modparm::parameter_type
-	s/__END__/1;
-
-	* modparm.pm: 
-	  - export %modules::conf
-	  - kill modparm::raw_parameters and modparm::parameter_type
-	which get merged back in modparm::parameters
-	  - add more parameters to modparm::parameters for harddrake
-	 harddrake/ui.pm |   19 ++++++++++---------
-	 modparm.pm      |   33 +++++++++------------------------
-	   2 files changed, 19 insertions(+), 33 deletions(-)
-	no one use second paramater of raw_parameters
-	factorize some code in modparm::parameter_type
-
-	* standalone/service_harddrake.sh: english fixes
-
-	* standalone/logdrake, scanner.pm, standalone/drakautoinst,
-	standalone/drakgw, standalone/scannerdrake: kill $Log (487 useless lines
-	supressed from drakxtools)
-
-2002/08/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm, install_steps_interactive.pm: partial rework of Windows
-	PDC authentication, still need
-	to run smbpasswd after network is up
-
-2002/08/04  Till Kamppeter  <till@mandrakesoft.com>
-
-	* detect_devices.pm, printerdrake.pm: Accelerated network scanning for
-	printers by applying "nmap" only to machines which answered to a
-	broadcast ping before.
-	Completed network/SMB printer auto-detection for recommended mode.
-	Started network/SMB printer auto-detection for expert mode.
-
-2002/08/02  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/logdrake: 
-	  - expand $email in cron script
-	  - disable sms alerts (free sms site too complicated to
-	handle). Postponed
-	  - mail service should work now
-	  - clean up code
-	  - give the correct right to cron file to work correctly
-	  - fix titi mess
-
-	* standalone/drakbug: 
-	  - avoiding looping indefinitalely when selecting items in combo
-	  - add commandline arguments: drakbug --report name_app
-
-2002/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive/gtk.pm, my_gtk.pm: move interactive::gtk::exit to
-	my_gtk::exit so that my_gtk
-	apps can call it (and fix busy mouse cursor problem that way)
-
-2002/08/02  jgotti
-
-	* standalone/drakboot: minor bugfix in calling bootloader::read
-
-2002/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* drakxtools.spec: keyboarddrake now handles choosing toggle key
-	(XkbOptions)
-
-2002/08/02  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: Corrected strings for printer queue list in main window.
-
-2002/08/02  warly
-
-	* share/rpmsrate, share/compssUsers: add lsb group
-
-2002/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: drop keyboard unsafe when not unsafe
-	anymore
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-
-	* Xconfig/various.pm: finish tvout configuration
-
-	* any.pm, Xconfig/xfreeX.pm, standalone/keyboarddrake, install2.pm,
-	install_steps.pm, Xconfig/parse.pm, Xconfig/default.pm, commands.pm,
-	printerdrake.pm: 
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-
-	* bootloader.pm (duplicate_kernel_entry): added
-
-	* keyboard.pm: don't have "unsafe" in /etc/sysconfig/keyboard
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-
-2002/08/01  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added stuff for scanning network for SMB printer
-	shares.
-
-	* detect_devices.pm: Added facility to scan network for SMB/Windows-hosted
-	printers.
-
-2002/08/01  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Makefile.config, drakxtools.spec: drakconf is dead
-
-	* harddrake/ui.pm, harddrake/TODO: update
-
-2002/08/01  warly
-
-	* share/logo-mandrake.png: new logo for beta 2
-
-2002/08/01  alus
-
-	* share/po/pl.po: updated translation
-
-2002/08/01  dam's <dams@idm.fr>
-
-	* ugtk.pm: removed fonctions typage
-
-2002/08/01  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/netconnect.pm, network/adsl.pm: 
-	  - First ECI adsl support step
-
-2002/08/01  gbeauchesne
-
-	* rescue/make_rescue_img: While stripping libraries, note that we may need
-	to have both /lib and
-	/lib64 on biarch systems.
-	  - MDK::Common'ize for arch() support
-	  - Don't grab /lib/i686/ libraries
-	  - Update list to use LIB which expands to either lib64 or lib
-
-	* rescue/list.x86_64: Add x86_64-specific filelist
-
-	* docs/HACKING: Add /bin/mknod to command list of sudoers
-
-	* mdk-stage1/disk.c: Add missing includes, <string.h> for bzero()
-
-	* rescue/list: 
-	  - MDK::Common'ize for arch() support
-	  - Don't grab /lib/i686/ libraries
-	  - Update list to use LIB which expands to either lib64 or lib
-
-2002/08/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/base.png, share/selected.png, share/rpm-semiselected.png,
-	share/rpm-installed.png, share/rpm-unselected.png, share/installed.png,
-	share/rpm-base.png, share/semiselected.png, share/unselected.png,
-	share/rpm-selected.png: change some png files names according to
-	simplification of
-	gtkcreate_png call of new my_gtk.pm
-
-	* drakxtools.spec, ugtk.pm, my_gtk.pm: commit according to 1.1.9-1mdk of
-	drakxtools, and especially:
-	  - integrate patches in my_gtk and ugtk for new rpmdrake:
-	  - [ugtk] add "gtkentry" so that we can create an entry and set
-	    initial value in one call
-	  - [my_gtk::main] don't set the events, to fix keyboard focus
-	    problem in entries when embedded
-	  - [my_gtk::_create_window] add $::noBorder, to not have a frame
-	    in the main window, so that it's possible to end up with
-	    windows with no border
-	  - [my_gtk] add ask_dir which is a ask_file with only the dir list
-	  - [my_gtk] add ask_browse_tree_info to the export tags, and:
-	  - add support for parents with no leaves, so that then we can
-	    partially build the trees (for speedup)
-	  - add "delete_all" and "delete_category" callbacks
-	  - use Gtk::CList::clear when removing all the nodes, much
-	    speedup
-
-2002/08/01  jgotti
-
-	* bootlook.pm: 
-	  - add splash theme section
-
-	* pixmaps/nosplash_thumb.png: add pixmap for drakboot
-
-2002/08/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-	* share/po/vi.po: updated vietnamese file
-
-2002/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: drop keyboard unsafe when not unsafe
-	anymore
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-
-	* any.pm: 
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-	get rid of some $prefix parameter passing (using $::prefix where needed
-	instead)
-
-	* Xconfig/various.pm: finish tvout configuration
-
-	* ugtk.pm, my_gtk.pm: move back Gtk->init to "new" and "gtkroot"
-	make perl_checker happy
-
-	* Xconfig/parse.pm: 
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-	BusID needs a string (thanks to Florent BERANGER)
-
-	* standalone.pm: don't display a wait_message in newt, but do suspend
-
-	* install_any.pm: get rid of some $prefix parameter passing
-
-	* pkgs.pm, fsedit.pm: get rid of some $prefix parameter passing (using
-	$::prefix where needed instead)
-
-	* loopback.pm (prepare_boot): use $::prefix
-
-	* interactive/gtk.pm: fix the many warnings when {icon} is not given
-
-	* Xconfig/resolution_and_depth.pm: in newt, have the resolutions sorted by
-	resolution size (wilplizgg)
-
-	* install_steps.pm: 
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-	get rid of some $prefix parameter passing
-	get rid of some $prefix parameter passing (using $::prefix where needed
-	instead)
-	bootloader::suggest uses a hash for its options
-
-	* .perl_checker: tune perl_checker
-
-	* Xconfig/xfreeX.pm, standalone/keyboarddrake, install2.pm,
-	Xconfig/default.pm, commands.pm, printerdrake.pm: 
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-
-	* keyboard.pm: don't have "unsafe" in /etc/sysconfig/keyboard
-	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
-	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
-	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
-	sysconfig/keyboard)
-	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
-	  - add dialog box to choose GRP_TOGGLE
-
-	* bootloader.pm (duplicate_kernel_entry): added
-	get rid of some $prefix parameter passing (using $::prefix where needed
-	instead)
-	bootloader::suggest uses a hash for its options
-
-2002/08/01  Till Kamppeter  <till@mandrakesoft.com>
-
-	* share/rpmsrate: Added new packages needed by printerdrake.
-
-	* printerdrake.pm: Let packages "nmap" and "scli" get installed by
-	printerdrake.
-	Printer model auto-detection for ethernet-connected printers when
-	setting up TCP/Socket, remote LPD, IPP, or HTTP printers.
-	Continued work on scanning the local network for printers.
-	In "setup_local()": Renamed variable "@parport" to "@autodetected".
-	Do not let list of auto-detected printers get sorted alphabetically, it
-	should stay sorted by ports.
-	Fixed typo in file name in "check_network()".
-
-2002/08/01  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm: perl_checker fix
-
-	* drakxtools.spec: drakconf is dead
-	17mdk: stage 1
-	my_gtk:
-	  - splitup it into my_gtk and ugtk as done by dams
-	  - resync with dams
-	  - increase the icon blinkage from 50ms to 100ms
-	%postun -n harddrake: return 0 when nothing has to be done
-
-	* ugtk.pm: we already require perl-GTK-GdkImLib so temporary disable
-	Gtk::Gdk::Pixbuf support, thus removing all gdk/gtk warnings
-	remove INFO warnings
-	my_gtk:
-	  - splitup it into my_gtk and ugtk as done by dams
-	  - resync with dams
-	  - increase the icon blinkage from 50ms to 100ms
-
-	* my_gtk.pm: my_gtk:
-	  - splitup it into my_gtk and ugtk as done by dams
-	  - resync with dams
-	  - increase the icon blinkage from 50ms to 100ms
-
-	* tinyfirewall.pm: kill stupide style
-	perl_checker fixes
-
-	* standalone/harddrake2: export license
-	move embedded and standalone managment from harddrake::ui to
-	standalone/harddrake2
-
-	* harddrake/TODO: update
-	move embedded and standalone managment from harddrake::ui to
-	standalone/harddrake2
-
-	* harddrake/ui.pm: update
-	add_icon_path is exported in :various
-	perl_checker fixes
-	perl_checker fixes
-	  - workaround for the busy mouse cursor set by
-	gtkset_mousecursor_wait() in my_gtk::destroy
-	  - remove debugging prints
-	
-	  - don't handle "$::isEmbedded ? kill('USR1', $::CCPID) :
-	  Gtk->exit(0);", it's done by interactive->exit()
-	export license
-	move embedded and standalone managment from harddrake::ui to
-	standalone/harddrake2
-
-	* standalone/logdrake, harddrake/bttv.pm, standalone/drakconnect,
-	standalone/drakbug, standalone/tinyfirewall, standalone/scannerdrake,
-	standalone/drakxtv: perl_checker fixes
-
-	* standalone/drakxconf: remove obsolote file
-
-	* Makefile.config: drakconf is dead
-
-	* tools/cvslog2changelog.pl: use new dam's email
-
-	* scanner.pm, harddrake/data.pm: perl_checker fixes
-	perl_checker fixes
-
-2002/07/31  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/card.pm, Xconfig/main.pm: 
-	  - add non-wizard ability to XFdrake
-	  - first part of ATI TVout support
-	(still needs patching initscript, and adding an entry in bootloader)
-	  (and testing of course :)
-
-	* bootlook.pm, network/network.pm, resize_fat/main.pm,
-	network/netconnect.pm, Xconfig/xfreeX.pm, diskdrake/interactive.pm,
-	network/ethernet.pm, printer.pm, detect_devices.pm,
-	resize_fat/info_sector.pm, install_any.pm: make perl_checker happy again
-	(replacing "{xx}->{yy}" by "{xx}{yy}")
-
-	* any.pm (devfssymlinkf): when creating a symlink on the system, use devfs
-	name if devfs is mounted
-
-	* standalone/logdrake, standalone/draksec, standalone/drakxservices,
-	standalone/drakautoinst, standalone/drakproxy, standalone/tinyfirewall,
-	standalone/keyboarddrake, standalone/drakboot, standalone.pm,
-	standalone/drakTermServ, standalone/net_monitor, standalone/diskdrake,
-	standalone/mousedrake, standalone/drakbackup, standalone/printerdrake,
-	standalone/drakfloppy, standalone/drakfont, standalone/drakconnect,
-	standalone/drakgw, standalone/scannerdrake, standalone/drakxtv: Handle
-	parsing --embedded command line in standalone.pm
-	=> allows to remove the somewhat mythical
-	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
-
-	* standalone/XFdrake: Handle parsing --embedded command line in
-	standalone.pm
-	=> allows to remove the somewhat mythical
-	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
-	  - add non-wizard ability to XFdrake
-	  - first part of ATI TVout support
-	  (still needs patching initscript, and adding an entry in bootloader)
-	  (and testing of course :)
-
-	* Xconfig/various.pm: make perl_checker happy again (replacing
-	"{xx}->{yy}" by "{xx}{yy}")
-	  - add non-wizard ability to XFdrake
-	  - first part of ATI TVout support
-	(still needs patching initscript, and adding an entry in bootloader)
-	  (and testing of course :)
-
-2002/07/31  Christian Belisle  <cbelisle@mandrakesoft.com>
-
-	* security/msec.pm: 
-	  - Fix page change between checks -> advanced
-	  - Factorize options-related functions
-	  - s/choose_options/choose_functions
-	  - Added security checks page
-	  - put the basic button on top (in the advanced page)
-	  - move set_server_link in the ignore list temporary
-
-	* security/main.pm: 
-	  - Factorize options-related functions
-	  - s/choose_options/choose_functions
-	  - Added security checks page
-	  - factorize functions (many functions -> one function)
-
-2002/07/31  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - s/GNOME/X/ for gnome-linuxconf
-
-	* standalone/drakbug: 
-	  - many changes
-	  - command line support (--report name_of_program), to be used in tools
-	  - ergonomy fixes (use table to align widget correctly)
-
-2002/07/31  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* run_program.pm: 
-	  - fix $ENV{HOME} value to '/root' if usermode break it
-
-2002/07/31  gbeauchesne
-
-	* c/Makefile.PL: lib64 fixes
-
-2002/07/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: hopefully fix "device or resource busy" problem in
-	cdrom
-	automatic mode (I messed up between truth value and number in a
-	list... the first value is numbered "0" whicih is "false"...)
-
-2002/07/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/help-it.pot, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po,
-	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
-	share/po/zh_TW.po, share/po/zh_CN.po, share/po/vi.po, share/po/fr.po,
-	share/po/nl.po, share/po/it.po, share/po/help-fr.pot, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/hu.po: updated pot file
-
-	* share/po/pt.po, share/po/eu.po: updated Portuguese file
-	updated pot file
-
-2002/07/31  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/main.pm: 
-	  - add non-wizard ability to XFdrake
-	  - first part of ATI TVout support
-	(still needs patching initscript, and adding an entry in bootloader)
-	  (and testing of course :)
-
-	* install_steps_interactive.pm, printerdrake.pm, pkgs.pm, network/adsl.pm,
-	modules.pm, commands.pm, install_interactive.pm, install_steps_gtk.pm,
-	interactive/stdio.pm, services.pm, keyboard.pm: make new perl_checker
-	happy
-	make new perl_checker happy (and that's not easy!)
-
-	* any.pm (devfssymlinkf): when creating a symlink on the system, use devfs
-	name if devfs is mounted
-	replace "$foo" with $foo
-	make new perl_checker happy
-	make new perl_checker happy (and that's not easy!)
-
-	* Xconfig/test.pm: change the location of X test image as told by dadou
-
-	* Xconfig/resolution_and_depth.pm (choose_gtk): ensure the response is one
-	of @resolutions (so that Y and maybe bios is kept)
-	(to_string): created
-	fix using $_ instead of $_[0] (thanks to perl_checker)
-	make new perl_checker happy (and that's not easy!)
-
-	* network/modem.pm: replace "$foo" with $foo
-
-	* resize_fat/info_sector.pm, Xconfig/xfreeX.pm: make perl_checker happy
-	again (replacing "{xx}->{yy}" by "{xx}{yy}")
-
-	* printer.pm, install_any.pm, detect_devices.pm: make perl_checker happy
-	again (replacing "{xx}->{yy}" by "{xx}{yy}")
-	replace "$foo" with $foo
-	make new perl_checker happy
-	make new perl_checker happy (and that's not easy!)
-
-	* bootlook.pm, network/netconnect.pm, network/ethernet.pm: make
-	perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}")
-	make new perl_checker happy
-	make new perl_checker happy (and that's not easy!)
-
-	* network/tools.pm, install_gtk.pm, network/isdn.pm: replace "$foo" with
-	$foo
-	make new perl_checker happy
-	make new perl_checker happy (and that's not easy!)
-
-	* my_gtk.pm (create_box_with_title): create an empty box when there is no
-	message
-	(also don't set $o->{box} since unused outside of this function)
-	replace "$foo" with $foo
-	make new perl_checker happy
-	make new perl_checker happy (and that's not easy!)
-
-	* Xconfig/card.pm: 
-	  - add non-wizard ability to XFdrake
-	  - first part of ATI TVout support
-	(still needs patching initscript, and adding an entry in bootloader)
-	  (and testing of course :)
-	handle cancel in xfree_and_glx_choose
-	default VideoRam choice 4096 when needVideoRam
-	make new perl_checker happy
-	make new perl_checker happy (and that's not easy!)
-
-	* network/network.pm: make perl_checker happy again (replacing
-	"{xx}->{yy}" by "{xx}{yy}")
-	replace "$foo" with $foo
-	  - have is_ip return the 4 parts of the ip address
-	  - cleanup
-	make new perl_checker happy (and that's not easy!)
-
-	* interactive/gtk.pm: allow "icon" to use the icon path
-	make new perl_checker happy (and that's not easy!)
-
-	* Makefile, crypto.pm: make new perl_checker happy
-
-	* Xconfig/monitor.pm: fix keeping the existing name when choosing monitor
-
-	* resize_fat/main.pm: make perl_checker happy again (replacing
-	"{xx}->{yy}" by "{xx}{yy}")
-	make new perl_checker happy
-
-	* standalone/mousedrake: Handle parsing --embedded command line in
-	standalone.pm
-	=> allows to remove the somewhat mythical
-	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
-	what is needed for usbmouse is "hid mousedev usbmouse" not the weird
-	"serial_usb"
-	make new perl_checker happy
-
-	* mouse.pm (read): don't look at /dev/mouse symlink to get {device},
-	sysconfig/mouse
-	gives it, so why bother (this fixes /dev//dev/misc/psaux bug)
-	make new perl_checker happy
-	make new perl_checker happy (and that's not easy!)
-
-	* standalone/logdrake, standalone/tinyfirewall, standalone/drakboot,
-	standalone.pm, standalone/drakTermServ, standalone/net_monitor,
-	standalone/drakbackup, standalone/printerdrake, standalone/drakconnect,
-	standalone/drakxtv, standalone/draksec, standalone/drakxservices,
-	standalone/drakautoinst, standalone/drakproxy, standalone/diskdrake,
-	standalone/drakfloppy, standalone/drakfont, standalone/scannerdrake:
-	Handle parsing --embedded command line in standalone.pm
-	=> allows to remove the somewhat mythical
-	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
-
-	* standalone/keyboarddrake, standalone/drakgw: Handle parsing --embedded
-	command line in standalone.pm
-	=> allows to remove the somewhat mythical
-	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
-	make new perl_checker happy
-
-	* install2.pm: allow acceptLicence to be automatic
-	make new perl_checker happy
-	make new perl_checker happy (and that's not easy!)
-
-	* diskdrake/interactive.pm: make perl_checker happy again (replacing
-	"{xx}->{yy}" by "{xx}{yy}")
-	make new perl_checker happy (and that's not easy!)
-
-	* standalone/XFdrake: Handle parsing --embedded command line in
-	standalone.pm
-	=> allows to remove the somewhat mythical
-	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
-	  - add non-wizard ability to XFdrake
-	  - first part of ATI TVout support
-	  (still needs patching initscript, and adding an entry in bootloader)
-	  (and testing of course :)
-	use configure_chooser when there is an existing configuration
-
-	* log.pm, interactive.pm, resize_fat/fat.pm, network/smb.pm, raid.pm,
-	partition_table.pm, diskdrake/hd_gtk.pm, install_steps.pm, swap.pm,
-	resize_fat/directory.pm, devices.pm, lang.pm, partition_table/raw.pm,
-	bootloader.pm, fsedit.pm, network/isdn_consts.pm: make new perl_checker
-	happy (and that's not easy!)
-
-	* Xconfig/various.pm: make perl_checker happy again (replacing
-	"{xx}->{yy}" by "{xx}{yy}")
-	  - add non-wizard ability to XFdrake
-	  - first part of ATI TVout support
-	(still needs patching initscript, and adding an entry in bootloader)
-	  (and testing of course :)
-	(info): fix displaying depth
-
-2002/07/31  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: Started working on network printer auto-detection.
-
-	* detect_devices.pm: Added subroutines for ethernet printer
-	auto-detection.
-
-2002/07/31  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: 
-	  - bump harddrake version
-	  - module configuration is saved (todo: read the config)
-	initial configuration window for modules. nothing is done yet.
-	remove latest (?) gtk warnings
-	don't display bogus fields
-	in embedded mode, don't kill the main gtk app (aka drakconf) but
-	only harddrake
-	  - add embedded mode for drakconf
-	further simplification
-	  - the hw tree and the info text are auto-size now
-	  - further ui simplifications
-	still more my_gtk simplifications
-	 ui.pm |   49 ++++++++++++++++---------------------------------
-	 1 files changed, 16 insertions(+), 33 deletions(-)
-	  - simplify Gtk::Text filling
-	
-	  - less gtk warnings get printed
-	further my_gtk simplifications
-	further my_gtk simplifications
-	further use of my_gtk
-	  - remove useless realizations
-	
-	  - simplify ctree and frames creation
-	  - make used once callbacks be anonymous functions
-	
-	  - replace scores of useless ->show() call by one show_all() call
-	
-	
-	 ui.pm |   82
-	+++++++++++++++++++++++++++---------------------------------------
-	 1 files changed, 34 insertions(+), 48 deletions(-)
-
-	* printer.pm: "cp -a" doesn't need "echo yes|"
-
-	* modparm.pm: split parameters in raw_parameters and parameters.
-	raw_parameters is
-	used by harddrake to list module options in order to offer a module
-	configuration window.
-
-	* harddrake/TODO: update
-	  - bump harddrake version
-	  - module configuration is saved (todo: read the config)
-	in embedded mode, don't kill the main gtk app (aka drakconf) but
-	only harddrake
-	  - add embedded mode for drakconf
-	  - bump version number
-	  - fix pcmcia network card detection (no more unknown)
-	  - fix scsi detection :
-	
-		o fix SCSI controllers detection (no more unknown)
-	
-		o fix misdetection of scsi devices as scsi host adapter
-	
-		o fix double scsi devices detection (both unknown and real
-		  category)
-	
-	  - update TODO list
-
-	* Makefile: rename a few target:
-	  - srpm -> slowsrpm
-	  - fastsrpm -> srpm
-
-	* drakxtools.spec: 15mdk (will be released tomorrow before the beta2)
-	don't require detect-lst, it'll take harddrake instead :-(
-	14mdk
-
-	* harddrake/data.pm: 
-	  - bump harddrake version
-	  - module configuration is saved (todo: read the config)
-	  - bump version number
-	  - fix pcmcia network card detection (no more unknown)
-	  - fix scsi detection :
-	
-		o fix SCSI controllers detection (no more unknown)
-	
-		o fix misdetection of scsi devices as scsi host adapter
-	
-		o fix double scsi devices detection (both unknown and real
-		  category)
-	
-	  - update TODO list
-
-	* share/po/fr.po: update fr translation
-
-2002/07/30  alus
-
-	* share/po/pl.po: variuos fixes and updates
-	updates
-
-2002/07/30  Christian Belisle  <cbelisle@mandrakesoft.com>
-
-	* security/libsafe.pm: 
-	  - complete re-write of draksec. splitted all the libsafe related
-	functions
-	in this file.
-
-	* security/msec.pm, standalone/draksec: 
-	  - complete re-write
-
-	* security/main.pm: 
-	  -complete re-write of draksec. The main functions will go in this
-	file.
-
-2002/07/30  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* Makefile.drakxtools: 
-	  - mv drakbug executable from $$SBINDEST to $$BINDEST
-
-2002/07/30  gbeauchesne
-
-	* tools/Makefile, tools/aewm-drakx/Makefile: lib64 fixes
-
-2002/07/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/hr.po, share/po/tr.po,
-	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
-	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
-	share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
-	share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po,
-	share/po/wa.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: reflect errata changes
-
-	* install_steps_interactive.pm: have errata in parameter to not break too
-	much updates
-	8.2->9.0
-	s/82errata.php3/90errata.php3/
-
-2002/07/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: updated po file
-
-2002/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: 
-	  - call fsck.jfs before mounting read-write (otherwise mount simply
-	fails)
-	  - propose fsck -y for ext2 when fsck -a fails
-
-	* standalone/drakbackup: never EVER put $xxxx in to-be-translated
-	strings!!
-
-	* diskdrake/interactive.pm (Add2LVM): for LVM on RAID, ensure the RAID is
-	created & enabled
-
-	* Xconfig/parse.pm: fix handling of commented empty line
-
-	* standalone/drakautoinst: use $o->{interactiveSteps} instead of
-	@install_steps_auto_install::graphical_steps
-
-	* keyboard.pm, c/stuff.xs.pl, detect_devices.pm, install_steps.pm: use usb
-	keyboard bCountryCode to choose the right keyboard
-
-	* install_steps_interactive.pm: use usb keyboard bCountryCode to choose
-	the right keyboard
-	  - call fsck.jfs before mounting read-write (otherwise mount simply
-	fails)
-	  - propose fsck -y for ext2 when fsck -a fails
-
-2002/07/30  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printerdrake.pm: Better placement for waiting message.
-
-	* printer.pm: Fixed a typo and a comment in the "SIGHUP_daemon()"
-	function.
-
-2002/07/30  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: further translations
-	update fr translation
-
-	* standalone/drakbackup: don't translate useless strings (here: "\n")
-
-	* standalone/drakbug: deush need to learn english
-
-2002/07/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): also save chosen on_services (this is
-	the only thing left to do to make it work :)
-
-	* mouse.pm: 
-	  - don't display "To activate the mouse, MOVE YOUR WHEEL!" when not
-	install
-	  - don't display "Please test the mouse" either
-	allow to not mess with X config auxmouse
-	(that way mousedrake doesn't need to care about it)
-
-	* run_program.pm: fix rooted() when chrooted and saving the result in a
-	perl variable
-
-	* Xconfig/resolution_and_depth.pm (configure_auto_install): really use
-	resolution_wanted given in $o
-
-	* partition_table.pm: cleanup
-
-	* services.pm (ask_standalone_gtk, ask_install): only return the
-	on_services (those
-	functions used to return ($l, $on_services) which used in a scalar
-	context
-	returned $on_services)
-
-	* standalone/mousedrake: 
-	  - fix using deprecated Xconfig.pm
-	  - document dam's hack for test mouse
-	  - cleanup
-	  - don't bother reading XFree mouse config
-	(using keep_auxmouse_unchanged of mouse::write_conf)
-
-	* diskdrake/interactive.pm: nicer error message when "You can't create a
-	new partition
-	(since you reached the maximal number of primary partitions).
-	First remove a primary partition and create an extended partition."
-
-	* printer.pm: make perl_checker happy
-
-	* standalone/XFdrake: make perl_checker happy
-	(ask_for_X_restart): make it work
-
-2002/07/29  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: Fixed some "$prefix" issues in the HPOJ auto-configuration
-	and in the Star Office/OpenOffice.org auto-configuration.
-
-2002/07/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: use aliases for stage1 params to reduce kernel msg
-
-2002/07/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file
-
-2002/07/29  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm: 
-	  - don't display "To activate the mouse, MOVE YOUR WHEEL!" when not
-	install
-	  - don't display "Please test the mouse" either
-	allow to not mess with X config auxmouse
-	(that way mousedrake doesn't need to care about it)
-	disallow big_help (when pressing F1) when testing mouse
-
-	* install_any.pm (g_auto_install): also save chosen on_services (this is
-	the only thing left to do to make it work :)
-
-	* drakxtools.spec: remove "Requires: groff" (nobody know why it's there)
-	(Pixel)
-
-	* run_program.pm: fix rooted() when chrooted and saving the result in a
-	perl variable
-
-	* share/rpmsrate: xpcd is still there (deush)
-	  - remove deprecated packages
-	  - adapt some to their names
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fix typo
-
-	* Xconfig/main.pm: restore xdm choice previous behaviour (auto_install)
-
-	* Xconfig/resolution_and_depth.pm (configure_auto_install): really use
-	resolution_wanted given in $o
-
-	* fs.pm: fix mke2fs on loopback
-	  - use $::prefix for reading/writing (it was missing for writing)
-	  - use output_p so that /etc/samba directory is created if needed
-	(fix bug reported by David Eastcott)
-
-	* Xconfig/test.pm: try harder to have "xfs" running
-
-	* partition_table.pm: cleanup
-
-	* services.pm (ask_standalone_gtk, ask_install): only return the
-	on_services (those
-	functions used to return ($l, $on_services) which used in a scalar
-	context
-	returned $on_services)
-
-	* standalone/mousedrake: 
-	  - fix using deprecated Xconfig.pm
-	  - document dam's hack for test mouse
-	  - cleanup
-	  - don't bother reading XFree mouse config
-	(using keep_auxmouse_unchanged of mouse::write_conf)
-
-	* Xconfig/default.pm: fix default config for mouse
-
-	* my_gtk.pm: disallow big_help (when pressing F1) when testing mouse
-
-	* printer.pm: make perl_checker happy
-
-	* diskdrake/interactive.pm: nicer error message when "You can't create a
-	new partition
-	(since you reached the maximal number of primary partitions).
-	First remove a primary partition and create an extended partition."
-	fix diskdrake::interactive::Options() excepts a value from
-	fs::mount_options_pack(), but fs::mount_options_pack() doesn't return
-	any
-	value (reported by Olivier Thauvin)
-
-	* standalone/XFdrake: make perl_checker happy
-	(ask_for_X_restart): make it work
-
-	* bootloader.pm: try to allow /boot on vfat (it used to work)
-
-	* network/smb.pm: 
-	  - use $::prefix for reading/writing (it was missing for writing)
-	  - use output_p so that /etc/samba directory is created if needed
-	(fix bug reported by David Eastcott)
-
-	* install_interactive.pm: fix partition wizard choice updating after
-	calling diskdrake
-
-	* install_steps_gtk.pm, install_steps_interactive.pm, install2.pm: ensure
-	choosing install-or-upgrade can't be done twice
-	(since it's badly handled and hard to handle nicely)
-
-2002/07/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: read and wrote /etc/modules.conf
-
-	* Makefile: 
-	  - consolidate duplicated 'use (warn|strict...' into nuke_perl target
-	  - thus enable to fix bug reported by gc (aka i only fixed localsrpm
-	  nuke, not srpm: one)
-
-	* drakxtools.spec: final changes batch
-	  - pixel: don't set release to 14mdk when 13mdk hadn't be released ...
-	  - list 13mdk changes
-	replace trigger by format test for hw config file conversion
-
-2002/07/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (configureX, configureXBefore, configureXAfter):
-	greatly simplified using new Xconfig stuff
-
-	* standalone/XFdrake: 
-	  - adapt to new Xconfig modules
-	  - try out the new "XFdrake resolution" and "XFdrake monitor" that'll
-	get into DrakConf soon
-
-	* Xconfig/xfree3.pm, Xconfig/various.pm, Xconfig/parse.pm,
-	Xconfig/xfree.pm, Xconfig/test.pm, Xconfig/xfreeX.pm,
-	Xconfig/proprietary.pm, Xconfig/xfree4.pm, Xconfig/monitor.pm,
-	Xconfig/default.pm, Xconfig/screen.pm, Xconfig/FILES: 14 new modules,
-	will it be enough?? :)
-
-	* any.pm (running_window_manager): return the pids found if wanted
-	(ddcxinfos): ensure no probe is done when $::noauto
-
-	* install_steps_gtk.pm, install_gtk.pm, standalone.pm: adapt to new
-	Xconfig modules
-
-	* install_any.pm (g_auto_install): no need to handle $o->{X} as a special
-	case, it's already done by Xconfig::main::export_to_install_X
-
-	* Xconfig.pm, Xconfigurator.pm, Xconfigurator_consts.pm: thou hast served
-	well, you may now lie in peace
-
-	* common.pm (availableRamMB): use a precise constraint on 'Card:Intel 810'
-	instead of a regexp
-
-	* Xconfig/card.pm: make perl_checker happy
-	rahh, don't commit my test code!
-	14 new modules, will it be enough?? :)
-
-	* share/list: CardsNames is not needed anymore
-
-	* interactive.pm: fix "nicer error message when {val} is not set for
-	ask_from & list" in case of a reference to a reference (ref is REF
-	instead of SCALAR)
-
-	* Xconfig/main.pm: fix displaying info about current configuration
-	14 new modules, will it be enough?? :)
-
-	* Xconfig/resolution_and_depth.pm: 
-	  - make the gtk resolution chooser work
-	  - dropped the differenciation between embedded or not
-	14 new modules, will it be enough?? :)
-
-	* mouse.pm (detect): return wacom inside $mouse
-	(mouseconfig): reduce the number of "Use of undefined value"
-	(set_xfree_conf): created
-
-	* install2.pm: wacom is now inside $mouse
-
-	* install_steps_interactive.pm (configureX): adapt to new Xconfig
-
-2002/07/28  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig/main.pm: fix displaying info about current configuration
-	14 new modules, will it be enough?? :)
-
-	* Xconfig/resolution_and_depth.pm: 
-	  - make the gtk resolution chooser work
-	  - dropped the differenciation between embedded or not
-	14 new modules, will it be enough?? :)
-
-	* install_steps_gtk.pm, install_gtk.pm, standalone.pm: adapt to new
-	Xconfig modules
-
-	* install_any.pm (g_auto_install): no need to handle $o->{X} as a special
-	case, it's already done by Xconfig::main::export_to_install_X
-
-	* mouse.pm (detect): return wacom inside $mouse
-	(mouseconfig): reduce the number of "Use of undefined value"
-	(set_xfree_conf): created
-
-	* install_steps.pm (configureX, configureXBefore, configureXAfter):
-	greatly simplified using new Xconfig stuff
-
-	* install2.pm: wacom is now inside $mouse
-
-	* standalone/XFdrake: 
-	  - adapt to new Xconfig modules
-	  - try out the new "XFdrake resolution" and "XFdrake monitor" that'll
-	get into DrakConf soon
-
-	* Xconfig/xfree3.pm, Xconfig/various.pm, Xconfig/parse.pm,
-	Xconfig/xfree.pm, Xconfig/test.pm, Xconfig/xfreeX.pm,
-	Xconfig/proprietary.pm, Xconfig/xfree4.pm, Xconfig/monitor.pm,
-	Xconfig/default.pm, Xconfig/screen.pm, Xconfig/FILES: 14 new modules,
-	will it be enough?? :)
-
-	* Xconfig.pm, Xconfigurator.pm, Xconfigurator_consts.pm: thou hast served
-	well, you may now lie in peace
-
-	* install_steps_interactive.pm (configureX): adapt to new Xconfig
-
-	* any.pm (running_window_manager): return the pids found if wanted
-	(ddcxinfos): ensure no probe is done when $::noauto
-
-	* Xconfig/card.pm: make perl_checker happy
-	rahh, don't commit my test code!
-	14 new modules, will it be enough?? :)
-
-	* common.pm (availableRamMB): use a precise constraint on 'Card:Intel 810'
-	instead of a regexp
-
-	* interactive.pm: fix "nicer error message when {val} is not set for
-	ask_from & list" in case of a reference to a reference (ref is REF
-	instead of SCALAR)
-
-2002/07/28  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ: Check for/install terminal-server and friends.
-	More intelligent error message when
-	mkisofs fails.  Cleanup code for use strict. Fix crash when no backup
-	dhcpd.conf.
-
-	* standalone/drakbackup: Numerous GUI crash fixes, oddities. Install
-	needed packages. Fix email, daemon modes.
-	Add rsync, webdav, cd, tape capabilities. Consolidate net method setup
-	screens.
-	Add CD device capability query.
-
-2002/07/27  alus
-
-	* share/po/pl.po: Fixes. There're some entries concerning mdk 8.2 - they
-	should be changed
-	globally
-
-2002/07/27  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_probeall): use "uniq" to have modules only once in
-	ddebug.log (a "uniq"
-	was already in modules.conf so it doesn't change the result)
-
-	* detect_devices.pm: use add_probeall for scsi_hostadapter, not add_alias
-	(may fix a bug reported by Jure Repinc)
-
-2002/07/27  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Completed implementation of the support for
-	HPOJ 0.9: Automatic photo card reader configuration, bugfixes.
-
-2002/07/26  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/logdrake: 
-	  - more consistency when back button hit in wizard mode
-	  - back button at last stage.
-
-	* standalone/drakbug: 
-	  - add browser list in case BROWSER env var isn't set
-
-2002/07/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/Makefile: fixed reference to rpmtools perl module.
-
-2002/07/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/rescue-gui.c: 
-	  - usage of attribute unused (has not been rebuilt since -W? ;p)
-	  - since i polluted the newt-frontend with probing functions, i
-	need to have probing functions (doing nothing) here :-((
-
-2002/07/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* harddrake/ui.pm: changed _("") -> "" empty strings must not be
-	translated
-
-2002/07/26  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/list: remove traceroute (c naze dixit gc)
-
-	* share/gen_locales.sh, lang.pm: hy is now using UTF8 locales
-
-	* any.pm, services.pm, install_steps.pm: use
-	run_program::rooted_get_stdout instead of `chroot $prefix ...`
-
-	* install_any.pm: use run_program::rooted_get_stdout
-
-	* Xconfigurator.pm: cleanup launching qiv (using run_program)
-
-	* bootloader.pm: 
-	  - fix dying when mkinitrd doesn't create an initrd
-	  - cleanup
-
-	* run_program.pm (rooted_get_stdout): handle one line return using
-	wantarray
-	  - also give the ability to redirect to an array ref
-	  - add rooted_get_stdout which is alike ``
-	add 2 functionalities to run_program:
-	  - run_program::run(prog, '>', 'STDOUT', ...)
-	run_program::run(prog, '2>', 'STDERR, ...)
-	  which will run with verbatim stdout or stderr
-	  - run_program::run(prog, '>', \$s, ...)
-	  run_program::run(prog, '2>', \$s, ...)
-	  which will return the stdout (resp. stderr) of the program in $s
-
-	* rescue/Makefile: ensure rescue is built and uploaded
-
-2002/07/26  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/TODO: dadou said "no expert mode"
-
-	* harddrake/ui.pm: 
-	  - s/channel/Channel/
-	  - bus_id is for usb devices too
-	  - remove obsolete fields info and name
-	  - add nbuttons, device, old_device descriptions
-
-	* drakxtools.spec: 13mdk
-
-2002/07/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/Makefile: fixed reference to rpmtools perl module.
-
-2002/07/26  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm: First step of automatic HP multi-function device
-	configuration with HPOJ 0.9.
-
-	* detect_devices.pm: Added detection of trhe serial number of a USB
-	printer (in preparation for HPOJ 0.9 support in printerdrake).
-
-2002/07/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix loading ide-cd (big thanks to rcc
-	<rickscafe.casablanca@gmx.net> you did
-	all the work to resolve the pb)
-	=> this fixes ide burner detection
-
-2002/07/25  alus
-
-	* share/po/pl.po: fix
-	fix
-	one entry more clearly :)
-
-2002/07/25  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/logdrake: 
-	  - don't display services that are not installed
-	  - word wrap string correctly
-	  - cleanup
-
-2002/07/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added log.
-	small code changes for upgrade.
-
-	* tools/syncrpms: no more use rpmtools.pm.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new logo (simplified
-	for 9.0).
-
-2002/07/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/id.po, share/po/vi.po: updated po files
-
-2002/07/25  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm: use a function icon_paths instead of @icon_paths
-	=> this ensure that $ENV{SHARE_PATH} value (used in @icon_paths) is set
-	independently of the loading order of the modules
-
-	* install_steps_interactive.pm: fix loading ide-cd (big thanks to rcc
-	<rickscafe.casablanca@gmx.net> you did
-	all the work to resolve the pb)
-	=> this fixes ide burner detection
-	Help "perl -cw" not reporting any warning
-	  - for mac free partition, use $freepart instead of $freepart_device,
-	$freepart_size ...
-	  - replace $timezone::ntp_servers by a function
-
-	* bootloader.pm: let the bootloader::mkinitrd error be seen by the GUI
-
-	* install_steps_newt.pm: please "perl -cw"
-
-	* verify_c: adapt to stuff.xs.pl instead of stuff.xs.pm
-
-	* partition_table.pm: add 0x35 partition table id meaning JFS (under OS/2)
-	(thank to Mika Laitio)
-
-	* fs.pm: noreturn is now exported, no need to
-	MDK::Common::Various::noreturn()
-
-	* common.pm: remove internal_error (which is now in MDK::Common)
-
-	* partition_table/mac.pm, timezone.pm: Help "perl -cw" not reporting any
-	warning
-	  - for mac free partition, use $freepart instead of $freepart_device,
-	$freepart_size ...
-	  - replace $timezone::ntp_servers by a function
-
-2002/07/25  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: 12mdk
-	final batch of changes
-	11mdk
-
-	* harddrake/TODO: still less things to do
-	update
-
-	* c/stuff.xs.pl: don't copy struct pciusb_entries on the stack
-
-	* standalone/service_harddrake: merge timeout and cancel cases
-	simplify:
-	  - we don't need to set media_type, we don't use it
-	  - mouse and mass storage media use the same key, let merge their code
-	path
-
-	* interactive/newt.pm: typo fix
-
-	* Makefile.drakxtools: fix pixel "i do not need to test" fscking bug that
-	broke drakxtools
-	build :-)
-
-	* harddrake/ui.pm: remove all gtk's "no callback/signal to disconnect"
-	warnings
-	add a fields data structure:
-	  - put together field translation and field description
-	  - this enable to get rid of %reverse_fields usage & creation
-	  - this ensure all field names & translations are marked translatables
-	for gettext
-	  - move $wait declaration around its usage and explicit its destruction
-	  - remove usb debugging message needed to trace the null description
-	  bug i fixed in ldetect
-	  - simplify the device fields rendering "because of" the above
-	  - simplify the help window creation/display/destruction (only one
-	  statement left)
-	  - explicitely call interactive->exit
-	handle both old device name and new devfs name
-
-	* share/po/fr.po: update french translation
-
-	* harddrake/data.pm: only do one probeall here (there's still many in
-	detect_devices,
-	probing caching should go there)
-
-	* Makefile: use spec_test rather than test
-
-2002/07/24  alus
-
-	* share/po/pl.po: fixes
-	the last untranslated entry
-
-2002/07/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c, mdk-stage1/disk.c, mdk-stage1/tools.c,
-	mdk-stage1/stage1.h, mdk-stage1/tools.h, mdk-stage1/frontend.h,
-	mdk-stage1/probing.h, mdk-stage1/stdio-frontend.c,
-	mdk-stage1/newt-frontend.c, mdk-stage1/probing.c: enhance (complicate?
-	;p) device detection so that scsi and usb
-	detection are done only when no ide cdrom with mandrake install
-	is detected (speed up), have usb keyboard modules installed
-	before any interactive question, honour "noauto" (skip usb
-	detection and insmod'ing)
-
-2002/07/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
-	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated po files
-
-2002/07/24  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, Makefile.drakxtools: add PMS_DIRS in Makefile.config and use
-	it everywhere
-	(cleaning some ugly stuff in Makefile.drakxtools while doing so)
-	=> now adding a new directory only need to be done at one place
-
-	* Xconfig/xfree3.pm, Xconfig/xfreeX.pm, mouse.pm, Xconfig/xfree4.pm,
-	Xconfig/parse.pm: new XFree handling library
-	  - only keyboard and mice functions are done, but adding the others is
-	quite easy
-	  - so for now only used in mousedrake
-	  - but keyboarddrake and (of course) XFdrake will come
-
-	* Makefile.config: add Xconfig
-	add PMS_DIRS in Makefile.config and use it everywhere
-	(cleaning some ugly stuff in Makefile.drakxtools while doing so)
-	=> now adding a new directory only need to be done at one place
-
-	* standalone/keyboarddrake: use Xconfig::xfree to set the XkbLayout
-	(better should&will come)
-
-	* c/stuff.xs.pl, c/Makefile, c/stuff.xs.pm: rename stuff.xs.pm to
-	stuff.xs.pl (since it's a prog, not a module)
-	(it helps for not having stuff.xs.pm in PMS)
-
-	* Xconfig/xfree.pm (get_both): fix returning one element (eg:
-	get_keyboard)
-	new XFree handling library
-	  - only keyboard and mice functions are done, but adding the others is
-	quite easy
-	  - so for now only used in mousedrake
-	  - but keyboarddrake and (of course) XFdrake will come
-
-	* log.pm: when testing, log on STDERR
-
-2002/07/24  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/data.pm: don't account scanners as unknown devices
-
-	* harddrake/ui.pm: scanners support:
-	  - split scannerdrake:val into vendor and description
-	  - don't display bogus "val:%HASH"
-
-2002/07/23  alus
-
-	* share/po/pl.po: fuzzy cheched
-
-2002/07/23  Christian Belisle  <cbelisle@mandrakesoft.com>
-
-	* security.pm: removal
-
-2002/07/23  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* security/msec.pm: 
-	  - fix typo: s/%%options;/%%options/
-
-2002/07/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: manage correctly unselectPackage and use perl-URPM >= 0.50.
-
-2002/07/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: s/usb/moreprofessional/ thanks to vdanen
-
-2002/07/23  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/help-eu.pot: rebuild after replacing \" by "
-
-	* any.pm, interactive.pm: use fuzzy_pidofs (to detect if kwin is running)
-
-	* detect_devices.pm: handle computers with no /proc/scsi/scsi
-
-	* .cvsignore, share/modparm.lst, Makefile: modparm.lst is not used anymore
-	(modinfo -p)
-
-2002/07/23  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: further translations update
-	update french translation
-
-	* drakxtools.spec: 10mdk changes
-	final changes batch
-	9mdk
-	g Move 2: partition table: hierarchy
-	  - Big Move 1: interactive::* hierarchy
-
-	* partition_table_dos.pm, partition_table/dos.pm, partition_table_mac.pm,
-	partition_table/sun.pm, partition_table/gpt.pm, partition_table_raw.pm,
-	partition_table_lvm_PV.pm, partition_table_empty.pm, standalone.pm,
-	partition_table_sun.pm, partition_table_bsd.pm, install_interactive.pm,
-	partition_table/raw.pm, partition_table.pm, any.pm,
-	partition_table/mac.pm, partition_table/bsd.pm, bootloader.pm,
-	diskdrake/hd_gtk.pm, partition_table/empty.pm, fsedit.pm,
-	partition_table/lvm_PV.pm, partition_table_gpt.pm: g Move 2: partition
-	table: hierarchy
-
-	* Makefile.config, install_steps.pm, install_steps_interactive.pm,
-	diskdrake/interactive.pm, Makefile.drakxtools, install_any.pm: g Move 2:
-	partition table: hierarchy
-	  - Big Move 1: interactive::* hierarchy
-
-	* harddrake/ui.pm: remove dead code
-	remove dead args
-	about and help windows: only show "OK" button, cancel one has no
-	purpose here
-
-	* detect_devices.pm: remove '-' before description for IBM eide hard disks
-	g Move 2: partition table: hierarchy
-
-	* standalone/service_harddrake: faster service startup
-
-	* interactive_newt.pm, interactive.pm, standalone/drakautoinst,
-	install_steps_stdio.pm, standalone/tinyfirewall, Xconfigurator.pm,
-	standalone/drakboot, standalone/diskdrake, standalone/mousedrake,
-	install_steps_newt.pm, printerdrake.pm, interactive_gtk.pm,
-	install_steps_gtk.pm, interactive/http.pm, interactive/stdio.pm,
-	interactive/newt.pm, services.pm, standalone/drakconnect,
-	standalone/drakgw, interactive/gtk.pm, interactive_http.pm,
-	interactive_stdio.pm, standalone/drakxtv: 
-	  - Big Move 1: interactive::* hierarchy
-
-	* Makefile: check make got correct tag from spec file
-	fast build: new target (fastsrpm = cvstag localsrpm)
-	g Move 2: partition table: hierarchy
-	  - Big Move 1: interactive::* hierarchy
-
-	* harddrake/data.pm: s/drakconnet/drakconnect
-
-	* harddrake/TODO: update
-
-2002/07/22  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm, mouse.pm, install2.pm, detect_devices.pm: when $::noauto,
-	hardwire no probing in detect_devices::probeall to ensure no probing is
-	never done
-
-	* share/po/help-fr.pot, share/po/help-de.pot, share/po/help-eu.pot,
-	help.pm, share/po/.cvsignore, share/po/Makefile, share/po/help-es.pot,
-	share/po/help-it.pot: 
-	  - update help.pm based on the xml manual
-	  - this fixes entities sticked together with no space in between
-	  - this also implies a few bad line-wrapping changes,
-	    but it needs to be done to have a clean state
-	    (we don't have one since 8.2beta where i updated things by hand)
-	  - put help-*.pot in CVS so that the files based on the xml manual can
-	be updated
-	  independently from DrakX.pot & .po's
-
-	* Newt/Makefile, resize_fat/Makefile, c/Makefile: ensure things build as
-	they should when perl is upgraded on compilation box
-	(using a nice scheme: make || make)
-
-2002/07/22  Till Kamppeter  <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Adapted printerdrake to CUPS 1.1.15 and
-	Perl 5.8.0 (for Foomatic).
-	Let network also be started during installation when LPRng or PDQ is the
-	spooler, so that the user can install queues to remote printers.
-
-2002/07/22  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/tools.pm: hide password in adsl configuration
-
-2002/07/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: try avoiding infinite loop.
-
-2002/07/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
-	share/po/lv.po, share/po/hu.po: updated pot file
-
-	* share/po/cs.po: updated Czech file
-	updated pot file
-
-2002/07/22  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile, Newt/Makefile, resize_fat/Makefile: ensure things build as
-	they should when perl is upgraded on compilation box
-	(using a nice scheme: make || make)
-
-	* any.pm, mouse.pm, install2.pm, detect_devices.pm: when $::noauto,
-	hardwire no probing in detect_devices::probeall to ensure no probing is
-	never done
-
-	* help.pm, share/po/.cvsignore, share/po/Makefile, share/po/help-de.pot,
-	share/po/help-fr.pot, share/po/help-eu.pot, share/po/help-es.pot,
-	share/po/help-it.pot: 
-	  - update help.pm based on the xml manual
-	  - this fixes entities sticked together with no space in between
-	  - this also implies a few bad line-wrapping changes,
-	    but it needs to be done to have a clean state
-	    (we don't have one since 8.2beta where i updated things by hand)
-	  - put help-*.pot in CVS so that the files based on the xml manual can
-	be updated
-	  independently from DrakX.pot & .po's
-
-	* share/po/help_xml2pm.pl: 
-	  - use new PerlIO instead of iconv
-	  - transliterate by hand &ndash and &eacute
-	  - move "use utf8" at top
-	  - fix the spaces between entities
-	(eg: &company-microsoft; &os-windows; must not be MicrosoftWindows)
-
-2002/07/21  Pixel  <pixel@mandrakesoft.com>
-
-	* drakxtools.spec: new snapshot
-
-	* Xconfigurator.pm: fix multi-head auto-choosing in auto install
-
-	* install_any.pm: workaround "traverse_tag" pb in Resolve.pm
-	resolve_requested (is it ok??)
-
-2002/07/21  Pixel  <pixel@mandrakesoft.com>
-
-	* drakxtools.spec: new snapshot
-
-	* install_any.pm: workaround "traverse_tag" pb in Resolve.pm
-	resolve_requested (is it ok??)
-
-2002/07/21  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: Load "extmod" is a must! (for things like shape and
-	dga)
-
-	* Xconfig.pm: fix typo
-
-2002/07/21  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: Load "extmod" is a must! (for things like shape and
-	dga)
-
-	* Xconfig.pm: fix typo
-
-	* share/locales-skeleton.tar.bz2: usr/share/locale skeleton is now build
-	in gen_locales.pl
-
-	* share/gen_locales.pl, share/gen_locales.sh: build per languages symlinks
-	using the new::during_install__lang2charset
-	  -> this enables doing the same during install when using ramdisk
-	=> no need to have a locale.cz2 anymore
-	  (this is now possible since the number of special cases is lower than
-	before)
-
-	* lang.pm: 
-	  - remove utf_xxx charsets, adding a flag UTF-8 instead
-	  - add during_install__lang2charset
-	  - when using ramdisk, no locale.cz2 anymore:
-	there are 3 main charsets containing everything for all locales, except
-	LC_CTYPE
-	    by default, there is UTF-8.
-	    when asked for GB2312 or BIG5, removing the other main charsets
-	  - cleanup comments (use #- instead of #)
-	  - various cleanup
-
-	* tools/make_mdkinst_stage2: no more locale.cz2, just keeping the main
-	charset /usr/share/locale/UTF-8
-
-2002/07/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/locales-skeleton.tar.bz2: usr/share/locale skeleton is now build
-	in gen_locales.pl
-
-	* share/gen_locales.pl, share/gen_locales.sh: build per languages symlinks
-	using the new::during_install__lang2charset
-	  -> this enables doing the same during install when using ramdisk
-	=> no need to have a locale.cz2 anymore
-	  (this is now possible since the number of special cases is lower than
-	before)
-
-	* lang.pm: 
-	  - remove utf_xxx charsets, adding a flag UTF-8 instead
-	  - add during_install__lang2charset
-	  - when using ramdisk, no locale.cz2 anymore:
-	there are 3 main charsets containing everything for all locales, except
-	LC_CTYPE
-	    by default, there is UTF-8.
-	    when asked for GB2312 or BIG5, removing the other main charsets
-	  - cleanup comments (use #- instead of #)
-	  - various cleanup
-
-	* tools/make_mdkinst_stage2: no more locale.cz2, just keeping the main
-	charset /usr/share/locale/UTF-8
-
-2002/07/20  Daouda Lo  <daouda@mandrakesoft.com>
-
-	* standalone/drakbug: 
-	  - complete app list
-
-2002/07/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: shorter and nicer XF86Config's
-
-	* mouse.pm: devfssymlinkf doesn't have any return value, so don't check it
-
-	* Xconfig.pm (getinfoFromXF86Config): move here setting prefer_xf3 based
-	on current choice on system
-	shorter and nicer XF86Config's
-
-	* install_gtk.pm: 
-	  - rename updateCardAccordingName into add_to_card__using_Cards
-	  - rename cardConfigurationAuto into probe_cards
-	  - cleanup the simple XF86Config used during install
-
-	* install_steps.pm: call config_dvd with $have_devfsd
-
-	* install_steps_gtk.pm: 
-	  - rename updateCardAccordingName into add_to_card__using_Cards
-	  - rename cardConfigurationAuto into probe_cards
-
-	* any.pm: try very hard to make rdvd work:
-	  - if not using devfs, it worked so keeping things unchanged
-	  - if using devfs, using the new dynamic rawdevice.script script to
-	bind a
-	rawdevice on demand
-	pb: can't have both a devfs and a non-devfs config,
-	    the /etc/sysconfig/rawdevices solution gives errors with devfs
-	    (since the dvd is not REGISTERed yet)
-	please perl_checker
-	fix typo
-	(devfssymlinkf): use devfs names for devfs/conf.d/xxx.conf, but not for
-	the
-	symlink in /dev (which is used when devfs is not)
-	devfssymlinkf doesn't have any return value, so don't check it
-
-	* Xconfigurator.pm: 
-	  - $in and $do_pkgs are no more global
-	=> it's now easier to keep track of interactive vs non-interactive
-	functions
-	  - rename updateCardAccordingName into add_to_card__using_Cards
-	  - rename cardConfigurationAuto into probe_cards
-	  - and a few other function renamings
-	shorter and nicer XF86Config's
-
-2002/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: 
-	  - reorganize monitor tree
-	  - merge XF3 & XF4 server/module choosing
-	  - replace {eide} by {EISA_ID} (=> {monitor} cleanup)
-	  - ensure a few "Cancel" are more better handled
-	  - ensure the default monitor in the monitor tree is the last chosen
-	one
-
-	* Xconfigurator_consts.pm: 
-	  - fix good_default_monitor (must not be 1600x1200!)
-	  - add r128 & radeon in XF4 drivers list
-
-	* interactive_gtk.pm: reduce "Use of uninitialized value" in a heavy used
-	place
-	(useful when debugging)
-
-	* Xconfig.pm: read monitor's VendorName & ModelName
-
-2002/07/19  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/adsl.pm: 
-	  - check if speedtouch_mgmt exist before installing it
-
-2002/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: revert changes so that DrakX work again.
-
-	* install_any.pm: select default_packages directly during setPackages.
-
-	* install_steps_interactive.pm: make sure unselectMostPackages is called
-	(so that changes in default_packages
-	are taken into account... but is may be any changes here ?).
-
-2002/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: 
-	  - fix good_default_monitor (must not be 1600x1200!)
-	  - add r128 & radeon in XF4 drivers list
-	fix default_monitors to adapt new MonitorsDB
-
-	* mouse.pm (devfssymlinkf): use devfs_device instead of device when
-	available
-
-	* partition_table.pm: handling devfs names for cdrom/hds on ide/scsi
-	(needs testing)
-
-	* any.pm (devfssymlinkf): try devices::to_devfs when devfs_device is not
-	provided
-	(devfssymlinkf): use devfs_device instead of device when available
-
-	* detect_devices.pm: help perl_checker
-	handling devfs names for cdrom/hds on ide/scsi (needs testing)
-
-	* devices.pm: add functions to_devfs and from_devfs. These only work for
-	devices entries
-	which can go devfs -> normal and normal -> devfs
-
-	* interactive_gtk.pm: reduce "Use of uninitialized value" in a heavy used
-	place
-	(useful when debugging)
-
-	* Xconfig.pm: read monitor's VendorName & ModelName
-	(readCardsDB): add handling BAD_FB_RESTORE & BAD_FB_RESTORE_XF3
-
-	* Xconfigurator.pm: 
-	  - reorganize monitor tree
-	  - merge XF3 & XF4 server/module choosing
-	  - replace {eide} by {EISA_ID} (=> {monitor} cleanup)
-	  - ensure a few "Cancel" are more better handled
-	  - ensure the default monitor in the monitor tree is the last chosen
-	one
-	partly cleanup monitor re-configuration (work in progress)
-
-2002/07/19  Christian Belisle  <cbelisle@mandrakesoft.com>
-
-	* any.pm: 
-	  - remove any msec related functions
-	  - remove 'use security::msec'
-
-2002/07/19  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/adsl.pm: 
-	  - check if speedtouch_mgmt exist before installing it
-
-2002/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: revert changes so that DrakX work again.
-
-	* install_any.pm: select default_packages directly during setPackages.
-	fix typo on what_provides (for pitchounette :-)).
-	added what_provides.
-
-	* standalone.pm: fix typo on last commit.
-	added what_provides.
-
-	* install_steps_interactive.pm: make sure unselectMostPackages is called
-	(so that changes in default_packages
-	are taken into account... but is may be any changes here ?).
-
-2002/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: updated Portuguese file
-
-2002/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/XFdrake: rename $i in $X (to have the same as
-	Xconfigurator.pm)
-
-	* interactive.pm: nicer error message when {val} is not set for ask_from &
-	list
-
-	* Xconfigurator.pm: partly cleanup monitor re-configuration (work in
-	progress)
-	  - don't write XF86Config when no {card}{server}
-	  - don't write XF86Config-4 when no {card}{driver}
-	  - workaround mixing values from existing config and
-	cardConfigurationAuto()
-	  - fix asking VideoRam
-	  - fix device0 in XF86Config
-	  - use "device1", "device2"... for "Device" Identifier
-	  - restore having a nice VendorName + BoardName
-	(since Identifier is not very useful)
-	  - get {card}{Chipset} from existing XF86Config
-	  - use $::prefix
-	  - drop obsolete stuff: Ramdac, Dacspeed, Clockchip
-	  - drop {card}{flags}, the few flags are moved directly to {card}
-	  - force_xf4 is now a global in Xconfigurator
-	  - create new functions for better modularity: multi_head_config,
-	xfree_and_glx_choices, xfree_and_glx_choose
-	  - for ppc, allow choosing DRI or not
-	  - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding
-	wether
-	to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX}
-	are only flags allowing or not DRI/UTAH.
-	  - {card}{use_xf4} is dropped. New function using_xf4 has this
-	functionality. The flags are now:
-	  - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
-	  - error if $force_xf4 && !{driver} || !{driver} && !{server}
-	  - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} &&
-	!{server}
-	  - {card}{description} contains what used to be {card}{identifier}
-	  - rename {card}{type} to {card}{card_name}
-	  - drop {monitor}{type}
-
-	* install_steps.pm: don't pass the prefix parameter, not needed/wanted
-	anymore
-
-	* Xconfigurator_consts.pm: fix default_monitors to adapt new MonitorsDB
-
-	* Xconfig.pm (readCardsDB): add handling BAD_FB_RESTORE &
-	BAD_FB_RESTORE_XF3
-	  - use "device1", "device2"... for "Device" Identifier
-	  - restore having a nice VendorName + BoardName
-	(since Identifier is not very useful)
-	  - get {card}{Chipset} from existing XF86Config
-	  - use $::prefix
-	  - drop obsolete stuff: Ramdac, Dacspeed, Clockchip
-	  - drop {card}{flags}, the few flags are moved directly to {card}
-	  - force_xf4 is now a global in Xconfigurator
-	  - create new functions for better modularity: multi_head_config,
-	xfree_and_glx_choices, xfree_and_glx_choose
-	  - for ppc, allow choosing DRI or not
-	  - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding
-	wether
-	to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX}
-	are only flags allowing or not DRI/UTAH.
-	  - {card}{use_xf4} is dropped. New function using_xf4 has this
-	functionality. The flags are now:
-	  - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
-	  - error if $force_xf4 && !{driver} || !{driver} && !{server}
-	  - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} &&
-	!{server}
-	  - {card}{description} contains what used to be {card}{identifier}
-	  - rename {card}{type} to {card}{card_name}
-	  - drop {monitor}{type}
-
-2002/07/19  Christian Belisle  <cbelisle@mandrakesoft.com>
-
-	* any.pm: 
-	  - remove any msec related functions
-	  - remove 'use security::msec'
-
-2002/07/19  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* standalone/drakconnect: 
-	  - any::setup_thiskind_backend changed in any::load_category_no_message
-
-2002/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt.po: updated Portuguese file
-
-2002/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/XFdrake: rename $i in $X (to have the same as
-	Xconfigurator.pm)
-
-	* Xconfigurator.pm: 
-	  - don't write XF86Config when no {card}{server}
-	  - don't write XF86Config-4 when no {card}{driver}
-	  - workaround mixing values from existing config and
-	cardConfigurationAuto()
-	  - fix asking VideoRam
-	  - fix device0 in XF86Config
-	  - use "device1", "device2"... for "Device" Identifier
-	  - restore having a nice VendorName + BoardName
-	(since Identifier is not very useful)
-	  - get {card}{Chipset} from existing XF86Config
-	  - use $::prefix
-	  - drop obsolete stuff: Ramdac, Dacspeed, Clockchip
-	  - drop {card}{flags}, the few flags are moved directly to {card}
-	  - force_xf4 is now a global in Xconfigurator
-	  - create new functions for better modularity: multi_head_config,
-	xfree_and_glx_choices, xfree_and_glx_choose
-	  - for ppc, allow choosing DRI or not
-	  - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding
-	wether
-	to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX}
-	are only flags allowing or not DRI/UTAH.
-	  - {card}{use_xf4} is dropped. New function using_xf4 has this
-	functionality. The flags are now:
-	  - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
-	  - error if $force_xf4 && !{driver} || !{driver} && !{server}
-	  - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} &&
-	!{server}
-	  - {card}{description} contains what used to be {card}{identifier}
-	  - rename {card}{type} to {card}{card_name}
-	  - drop {monitor}{type}
-
-	* interactive.pm: nicer error message when {val} is not set for ask_from &
-	list
-
-	* Xconfig.pm: 
-	  - use "device1", "device2"... for "Device" Identifier
-	  - restore having a nice VendorName + BoardName
-	(since Identifier is not very useful)
-	  - get {card}{Chipset} from existing XF86Config
-	  - use $::prefix
-	  - drop obsolete stuff: Ramdac, Dacspeed, Clockchip
-	  - drop {card}{flags}, the few flags are moved directly to {card}
-	  - force_xf4 is now a global in Xconfigurator
-	  - create new functions for better modularity: multi_head_config,
-	xfree_and_glx_choices, xfree_and_glx_choose
-	  - for ppc, allow choosing DRI or not
-	  - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding
-	wether
-	to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX}
-	are only flags allowing or not DRI/UTAH.
-	  - {card}{use_xf4} is dropped. New function using_xf4 has this
-	functionality. The flags are now:
-	  - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
-	  - error if $force_xf4 && !{driver} || !{driver} && !{server}
-	  - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} &&
-	!{server}
-	  - {card}{description} contains what used to be {card}{identifier}
-	  - rename {card}{type} to {card}{card_name}
-	  - drop {monitor}{type}
-
-	* install_steps.pm: don't pass the prefix parameter, not needed/wanted
-	anymore
-
-2002/07/18  Christian Belisle  <cbelisle@mandrakesoft.com>
-
-	* standalone/draksec: create the main() function in security.pm
-
-	* security.pm: Re-Addition: will contain the security related (but not
-	related to any apps)
-	funtioncs and the draksec interface.
-	removing
-
-	* security/msec.pm: 
-	  - add prefix var in file names
-	  - remove useless expert_mode var
-	  - add get_options(): will be used to get various options from msec
-	move the msec related functions from any.pm to msec.pm. create
-	sec_options
-
-2002/07/18  Damien Chaumette  <dchaumette@mandrakesoft.com>
-
-	* network/netconnect.pm: . draknet renamed in drakconnect
-
-2002/07/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixes allowNVIDIA_rpms against perl-URPM.
-	really fixes it.
-	fixes error if package is not found (regression fixed).
-
-	* pkgs.pm: removed all the commented out code obsoleted.
-	fix speed improvement for computeGroupSize by computing closure directly
-	(in
-	order to have an approximative size, not the real one).
-	add back change CD support.
-
-	* standalone/XFdrake: fixes with new urpm library of urpmi.
-
-2002/07/18  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: 
-	  - set $::prefix
-	  - drop $o->{root} (was "/tmp/root-perl-install" when testing but
-	completly unused)
-
-	* standalone/XFdrake, install_steps_interactive.pm: don't pass the prefix
-	parameter, not needed/wanted anymore
-
-	* Xconfigurator.pm, Xconfigurator_consts.pm, Xconfig.pm: 
-	  - %standard_monitors are now in Cards+, dropping them
-	  - multi head support generalized, now based on Cards+ MULTI_HEAD
-	  - fix some ModeLines being written twice in XF86Config
-	  - remove setting DefaultFbBpp to 32
-	(since it is the default in all my tests)
-
-	* common.pm, install_any.pm: use $::prefix instead of $::o->{prefix}
-
-2002/07/18  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm, install_steps_interactive.pm: add support/option for
-	Windows(tm) authentication via winbind
-
-2002/07/18  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: 7mdk changes
-	6mdk final changes
-
-	* harddrake/bttv.pm: useless standalone dependancy for pixel fscking
-	checker
-
-	* Makefile: faster startup: remove use (diagnostics|vars|strict) in srpm
-	target as
-	in local target (dams fsck)
-
-	* harddrake/TODO: update
-
-	* harddrake/data.pm: s/draknet/drakconnect/
-	  - bump version number
-	  - move scsi & ata controllers, tv-audio, dvd, burners, ... in their
-	own "non configurable" sections
-
-2002/07/18  warly
-
-	* share/logo-mandrake.png: install logo for 9.0 beta 1
-
-2002/07/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fix speed improvement for computeGroupSize by computing closure
-	directly (in
-	order to have an approximative size, not the real one).
-	add back change CD support.
-
-2002/07/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm, Xconfigurator_consts.pm, Xconfig.pm: 
-	  - %standard_monitors are now in Cards+, dropping them
-	  - multi head support generalized, now based on Cards+ MULTI_HEAD
-	  - fix some ModeLines being written twice in XF86Config
-	  - remove setting DefaultFbBpp to 32
-	(since it is the default in all my tests)
-
-2002/07/17  alus
-
-	* share/po/pl.po: some more fixes
-	some little changes
-
-2002/07/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: added missing use pkgs.
-
-2002/07/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pkgs.pm: spell right harddrake (two 'd') in @preferred
-
-	* tools/cvslog2changelog.pl: add daouda chaumette cbelisle
-
-2002/07/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_gtk.pm: normalize Modeline to ModeLine
-
-	* common.pm: add function "internal_error" (a specialized "die")
-
-	* drakxtools.spec: the new XFdrake needs latest ldetect-lst
-
-	* Makefile (test_pms): exclude urpm from uses
-
-	* printer.pm, printerdrake.pm: use {XXX} instead of {'XXX'} (as detected
-	by new perl_checker)
-	remove "$_ =~ " (as detected by new perl_checker)
-
-	* any.pm: move the "if !$::testing" for not modifying inittab in function
-	runlevel()
-	(was in install_steps.pm)
-
-	* commands.pm: remove "$_ =~ " (as detected by new perl_checker)
-
-	* Xconfigurator.pm, Xconfigurator_consts.pm, install_steps.pm,
-	standalone/XFdrake, Xconfig.pm: Big Xconfigurator.pm cleanup/rework
-	  - use $X instead of $o (to avoid name conflict with DrakX's $o)
-	  - {flag}{noclockprobe} unused, dropping it
-	  - rename {memory} into "VideoRam"
-	  - rename {ramdac} into {Ramdac}
-	  - rename {chipset} into {Chipset}
-	  - rename {clockchip} into {Clockchip}
-	  - rename {keyboard}{xkb_model} into {keyboard}{XkbModel}
-	  - rename {keyboard}{xkb_keymap} into {keyboard}{XkbLayout}
-	  - drop {mouse}{chordmiddle} (obsolete)
-	  - drop {mouse}{cleardtrrts} (obsolete, was not written to XF4 config)
-	  - &testConfig is unused, removing it
-	  - as a concequence, {clocklines} is never set, dropping it
-	  - when UNSUPPORTED remove {driver}, instead of setting
-	{flag}{unsupported}
-	  - Cards+ now only provide {Chipset} for cards needing it
-	  => {flag}{needChipset} not needed anymore
-	  - moved setting needVideoRam in Cards+ (via NEEDVIDEORAM)
-	  (hoping it will work: since the regexp was broken, it was never done.
-	   (it was applied on the module field of pcitable, instead of the
-	description))
-	  - dropped modelines_text_Trident_TG_96xx case (it has never been used)
-	  - rename %xkb_options into %XkbOptions
-	  - rename {DRI_glx} into {DRI_GLX}, the value now comes from Cards+
-	  instead of regexp'ing {identifier}
-	  - rename {Utah_glx} into {UTAH_GLX}, the value now comes from Cards+
-	  instead of regexp'ing {identifier}
-	  - rename {Utah_glx_EXPERIMENTAL} into {UTAH_GLX_EXPERIMENTAL}, the
-	value now comes from Cards+
-	  instead of regexp'ing {identifier}
-	  - very_bad_card and bad_card are now the same, the value now comes
-	from
-	  Cards+ (BAD_FB_RESTORE & BAD_FB_RESTORE_XF3)
-	  - drop unused @accelservers
-	  - remove $modelines_text_apple, use $modelines_text_ext instead
-	  - don't use a <Section "Modes"> together with <UseModes "Mac Modes">,
-	put
-	  directly modelines in Section "Monitor"
-	  (why should ppc behave differently than others!?)
-	  - replace (conflicting) ModeLines "1280x1024 @ 74 Hz" and
-	  "1280x1024 @ 76 Hz" with "1280x1024 @ 75 Hz" (from ddcxinfos)
-	  - drop ModeLine "640x480 @ 72 Hz"
-	  (it conflicts, and anyway, it has no real use nowadays :)
-	  - drop comments about HorizSync, VertRefresh and ModeLine's from
-	  XF86Config
-	  - drop many unneeded stuff from XF86Config:
-	  AutoRepeat, Xqueue, Xleds, NoTrapSignals, XkbTypes, XkbKeycodes,
-	  XkbCompat, XkbRules, LeftAlt/RightAlt/ScrollLock/RightCtl
-	  - drop section comments from XF86Config
-	  - drop XF86_Mono configuration
-	  (it doesn't work anyway, seems like it needs a special ModeLine?)
-	  - drop 320x200 with XF86_SVGA (who can use this!?)
-	  - do not write Screen section "accel" if the server configured is not
-	an
-	  accel one
-	  - drop the "Generic VGA" Device section for XF4
-	  (this device is unused)
-	  - drop {monitor}{vendor}, {monitor}{model}, {card}{vendor},
-	{card}{model},
-	  {card}{board} (only description strings, not useful for running the
-	server)
-	  - use x_res instead of wres for things like 1024 in 1024x768
-
-2002/07/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: added missing use pkgs.
-
-2002/07/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pkgs.pm: spell right harddrake (two 'd') in @preferred
-
-2002/07/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_gtk.pm: normalize Modeline to ModeLine
-
-	* common.pm: add function "internal_error" (a specialized "die")
-
-	* drakxtools.spec: the new XFdrake needs latest ldetect-lst
-
-	* Makefile (test_pms): exclude urpm from uses
-
-	* printer.pm, printerdrake.pm: use {XXX} instead of {'XXX'} (as detected
-	by new perl_checker)
-	remove "$_ =~ " (as detected by new perl_checker)
-
-	* any.pm: move the "if !$::testing" for not modifying inittab in function
-	runlevel()
-	(was in install_steps.pm)
-
-	* commands.pm: remove "$_ =~ " (as detected by new perl_checker)
-
-	* Xconfigurator.pm, Xconfigurator_consts.pm, install_steps.pm,
-	standalone/XFdrake, Xconfig.pm: Big Xconfigurator.pm cleanup/rework
-	  - use $X instead of $o (to avoid name conflict with DrakX's $o)
-	  - {flag}{noclockprobe} unused, dropping it
-	  - rename {memory} into "VideoRam"
-	  - rename {ramdac} into {Ramdac}
-	  - rename {chipset} into {Chipset}
-	  - rename {clockchip} into {Clockchip}
-	  - rename {keyboard}{xkb_model} into {keyboard}{XkbModel}
-	  - rename {keyboard}{xkb_keymap} into {keyboard}{XkbLayout}
-	  - drop {mouse}{chordmiddle} (obsolete)
-	  - drop {mouse}{cleardtrrts} (obsolete, was not written to XF4 config)
-	  - &testConfig is unused, removing it
-	  - as a concequence, {clocklines} is never set, dropping it
-	  - when UNSUPPORTED remove {driver}, instead of setting
-	{flag}{unsupported}
-	  - Cards+ now only provide {Chipset} for cards needing it
-	  => {flag}{needChipset} not needed anymore
-	  - moved setting needVideoRam in Cards+ (via NEEDVIDEORAM)
-	  (hoping it will work: since the regexp was broken, it was never done.
-	   (it was applied on the module field of pcitable, instead of the
-	description))
-	  - dropped modelines_text_Trident_TG_96xx case (it has never been used)
-	  - rename %xkb_options into %XkbOptions
-	  - rename {DRI_glx} into {DRI_GLX}, the value now comes from Cards+
-	  instead of regexp'ing {identifier}
-	  - rename {Utah_glx} into {UTAH_GLX}, the value now comes from Cards+
-	  instead of regexp'ing {identifier}
-	  - rename {Utah_glx_EXPERIMENTAL} into {UTAH_GLX_EXPERIMENTAL}, the
-	value now comes from Cards+
-	  instead of regexp'ing {identifier}
-	  - very_bad_card and bad_card are now the same, the value now comes
-	from
-	  Cards+ (BAD_FB_RESTORE & BAD_FB_RESTORE_XF3)
-	  - drop unused @accelservers
-	  - remove $modelines_text_apple, use $modelines_text_ext instead
-	  - don't use a <Section "Modes"> together with <UseModes "Mac Modes">,
-	put
-	  directly modelines in Section "Monitor"
-	  (why should ppc behave differently than others!?)
-	  - replace (conflicting) ModeLines "1280x1024 @ 74 Hz" and
-	  "1280x1024 @ 76 Hz" with "1280x1024 @ 75 Hz" (from ddcxinfos)
-	  - drop ModeLine "640x480 @ 72 Hz"
-	  (it conflicts, and anyway, it has no real use nowadays :)
-	  - drop comments about HorizSync, VertRefresh and ModeLine's from
-	  XF86Config
-	  - drop many unneeded stuff from XF86Config:
-	  AutoRepeat, Xqueue, Xleds, NoTrapSignals, XkbTypes, XkbKeycodes,
-	  XkbCompat, XkbRules, LeftAlt/RightAlt/ScrollLock/RightCtl
-	  - drop section comments from XF86Config
-	  - drop XF86_Mono configuration
-	  (it doesn't work anyway, seems like it needs a special ModeLine?)
-	  - drop 320x200 with XF86_SVGA (who can use this!?)
-	  - do not write Screen section "accel" if the server configured is not
-	an
-	  accel one
-	  - drop the "Generic VGA" Device section for XF4
-	  (this device is unused)
-	  - drop {monitor}{vendor}, {monitor}{model}, {card}{vendor},
-	{card}{model},
-	  {card}{board} (only description strings, not useful for running the
-	server)
-	  - use x_res instead of wres for things like 1024 in 1024x768
-
-2002/07/16  alus
-
-	* share/po/pl.po: unused string removed
-
-2002/07/16  cbelisle
-
-	* standalone/draksec: re-write the part setting the security admin
-
-	* security.pm: draksec - initial commit. preparing for the advanced
-	section.
-
-	* any.pm: draksec:
-	  - rewrite the function to set the security admin
-	  - remove ugly buttons, 'advanced' button will come later
-
-2002/07/16  dchaumette
-
-	* standalone/drakbug, standalone/interactive_http/authorised_progs,
-	standalone/drakxconf: o finish moving draknet to drakconnect in
-	standalone
-
-2002/07/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: update with newer perl-URPM.
-	added log (finding packages to upgrade or computing installed flag)
-
-	* install_steps.pm: removed useless package selection cleaning.
-
-	* install_steps_gtk.pm: code cleanup.
-
-	* install_steps_interactive.pm: improve a little.
-	fixed missing upgrade.
-	added wait message when finding packages to upgrade.
-
-	* install2.pm: fixed reference to step 'selectPackagesToUpgrade'.
-
-	* install_any.pm: fixed die when choosePackages step is redone.
-
-	* crypto.pm: allow upgrade (if any) by using version at 8.2.
-
-2002/07/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: small english fix thx to vdanen
-
-	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
-	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
-	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
-	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
-	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
-	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
-	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
-	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
-	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
-	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
-	share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po,
-	share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/el.po,
-	share/po/cs.po, share/po/bg.po, share/po/hu.po: reflect typo fix in
-	any.pm in the po's so that the translation are not broken
-
-	* mdk-stage1/stage1.c: extend a bit fatal error when trying to execute
-	/usr/bin/runinstall2 and it's not possible
-
-2002/07/16  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakTermServ: fix "$" in translated string
-
-	* Makefile: don't display etags command (too long, not nice)
-
-2002/07/15  daouda
-
-	* standalone/drakbug: 
-	  - isStandalone is set in standalone.pm, removed
-
-	* standalone/draksec: 
-	  - isStandalone is set in standalone.pm, removed.
-	  - set isStandalone to 1 to center wait messages
-
-2002/07/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: synced.
-
-	* install_any.pm: synced with other module updated.
-
-	* c/stuff.xs.pm: cleaned no more used method.
-
-	* pkgs.pm: made upgrade almost work again (need testing and
-	remove/deselect still doesn't
-	work properly).
-
-	* install_steps.pm: code re-organisation (a little).
-
-	* install_steps_gtk.pm: fixed flag usage (still check selected package to
-	upgrade but already selected
-	are correctly shown).
-
-2002/07/15  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: revert titi's error
-
-2002/07/11  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/list.i386: switch to vendor_perl
-
-2002/07/10  daouda
-
-	* standalone/drakbug: 
-	  - code update
-	  - use local http server for test.
-
-2002/07/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_gtk.pm, crypto.pm, share/list, pkgs.pm,
-	install_any.pm, install2.pm, install_steps_interactive.pm: use perl-URPM
-	instead of rpmtools.
-
-	* tools/Makefile: use vendor_perl instead of site_perl (check of
-	rpmtools.pm and packdrake.pm presence).
-
-2002/07/10  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile: nicer use of vendor_perl instead of site_perl (check of
-	rpmtools.pm and
-	packdrake.pm presence) ... i had forgot to commit :-(
-
-	* ftp.pm: don't let Timeout kill us
-
-	* modparm.pm: rollback titi's modif
-
-	* detect_devices.pm: cleanup
-
-	* share/list: add integer.pm (needed by Time::Local (needed by Net::FTP))
-
-2002/07/10  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* drakxtools.spec: list and describe all gui tools from drakxtools
-	enhance cohenrency: step 1
-	  - ide and scsi devices use channel rather than bus to store their
-	  physical connection, which is more logic (at least for eide)
-	  - all devices have their connection bus in bus field, not in bus for
-	  {pci,usb,...} and interface_type for {scsi,eide,other_block_devices}
-	
-	  - detect_devices:getIDE() : add eide_hds hash in order to be able to
-	  split info field between model and vendor
-	
-	  - harddrake::ui : code reduction allowed by the above changes
-	fix parrallel build
-	fix perl depandancy on new perl
-
-	* diskdrake/interactive.pm, detect_devices.pm, install_steps.pm,
-	harddrake/ui.pm: enhance cohenrency: step 1
-	  - ide and scsi devices use channel rather than bus to store their
-	  physical connection, which is more logic (at least for eide)
-	  - all devices have their connection bus in bus field, not in bus for
-	  {pci,usb,...} and interface_type for {scsi,eide,other_block_devices}
-	
-	  - detect_devices:getIDE() : add eide_hds hash in order to be able to
-	  split info field between model and vendor
-	
-	  - harddrake::ui : code reduction allowed by the above changes
-
-	* modparm.pm: typo fix
-	no need to test two times if modinfo is executable in normal (ie not
-	in drakx) case ...
-
-	* Makefile, Makefile.drakxtools: remove all
-	(use\s+(diagnostics|vars|strict)' instances
-
-2002/07/09  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: have MDK::Common's in TAGS
-
-	* detect_devices.pm: rewrite getSCSI, now handling scanners
-
-	* share/list: adapt to new perl 5.8.0
-
-	* common.pm, modparm.pm: move join_lines to common
-
-2002/07/09  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: have MDK::Common's in TAGS
-
-	* detect_devices.pm: rewrite getSCSI, now handling scanners
-
-	* share/list: adapt to new perl 5.8.0
-
-	* common.pm, modparm.pm: move join_lines to common
-
-2002/07/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/TODO: fix boot freeze on hw change: initscript was running us
-	with stdout
-	redirected to /dev/null; just use a small sh wrapper to fix it
-	update
-
-	* standalone/service_harddrake.sh: 
-	  - redirect stderr
-	  - remove old commented stuff
-	fix boot freeze on hw change: initscript was running us with stdout
-	redirected to /dev/null; just use a small sh wrapper to fix it
-
-	* Makefile.drakxtools: fix boot freeze on hw change: initscript was
-	running us with stdout
-	redirected to /dev/null; just use a small sh wrapper to fix it
-
-	* standalone/service_harddrake: 
-	  - configurator got displayed
-	  - move timeout around configurator asking (still not 100% ok)
-	time out after 200 seconds
-	fix boot freeze on hw change: initscript was running us with stdout
-	redirected to /dev/null; just use a small sh wrapper to fix it
-
-	* drakxtools.spec: fix url
-	add harddrake service wrapper
-	really final changes
-	final batch of changes for -3mdk ?
-	fix boot freeze on hw change: initscript was running us with stdout
-	redirected to /dev/null; just use a small sh wrapper to fix it
-
-	* Makefile.config: add harddrake service wrapper to installed files
-
-	* harddrake/ui.pm: 
-	  - add channel: primary/slave for eide deivces
-	  - get rid of ->{set,get}_user_data
-	ensure we don't mix scsi and pci devices
-
-	* harddrake/bttv.pm: log only if options set
-	typo fix
-	only log explanations in standalone mode
-
-	* share/po/Makefile: fake make so that its builtin rule to create file
-	from file.sh doesn't
-	nuke service_harddrake with it wrapper
-
-2002/07/08  daouda
-
-	* standalone/drakbug: 
-	  - detect package automatically when app is chosen
-
-2002/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: create the list_modules symlink
-	make test_pms should now work (was pb with list_modules.pm)
-
-	* install_steps.pm, any.pm: mtools config so that "mdir a:" accesses the
-	usb floppy if one is there
-
-	* diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind
-	buttons) for the raid tab
-
-	* install_steps_interactive.pm: in case the licence is refused, ask for
-	confirmation
-
-	* diskdrake/interactive.pm: make Clear_all work on a LVM VG
-	make Clear_all remove partitions from raids
-
-2002/07/08  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/TODO: remove fixed stuff
-
-	* Makefile.drakxtools: s/PHONY/.PHONY/
-	  - simplifications
-	  - harddrake support is complete
-
-	* drakxtools.spec: update
-	fix post: add start argument
-	service changes batch for 2mdk
-	rpmlint fixes
-	parrallel build
-	1.1.8-2mdk
-	  - enhance descriptions
-	  - various spec clean
-	split-up between harddrake and harddrake-ui
-	complete changelog
-	  - obsoletes/provides libdetect-lst, libdetect-lst-devel, detect,
-	detect-lst
-	  - don't restart harddrake on install
-	  - some stuff moved into Makefile.drakxtools
-	  - fix harddrake menu entry
-	  - fix build
-
-	* harddrake/data.pm: cache @devices so that hw probe is only done once
-
-	* standalone/harddrake2: no need to 'use strict' in "binary"
-
-	* standalone/service_harddrake: 
-	  - only work on start
-	  - add "please wait" message
-	  - really don't cry when no previous config
-	skip configuration on firt run
-	skip hw classes without configurator (which'll have a configurator
-	after porting updfstab)
-
-	* harddrake/ui.pm: 
-	  - rehide "run config tool" button when it has been displayed in
-	another hw class
-	don't display "run config tool" button if no configurator availlable
-	  - center the main window
-	  - remove drakx decorations
-	mice:
-	  - s/nbuttons/Number of buttons/
-	  - delete qw(MOUSETYPE XMOUSETYPE unsafe)
-	don't delete info field in normal path
-	  - eide devices: split up info field into vendor and model fields
-	  - complete help
-	hummm ... eide: 0->master, 1->slave :-(
-	  - remove save_report menu entry, this is done by service_harddrake
-	  - move $in declaration near where it's used
-	eide hard disks : print master/slave for bus_location
-
-2002/07/08  daouda
-
-	* Makefile.config: 
-	  - add drakbug
-
-	* drakxtools.spec: 
-	  - add dir recursively
-
-	* standalone/drakbug: 
-	  - detect package automatically when app is chosen
-	  - standalone app
-
-2002/07/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mount.c: small readability & size enhancement
-
-2002/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: in case the licence is refused, ask for
-	confirmation
-	help perl_checker
-
-	* diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind
-	buttons) for the raid tab
-
-	* diskdrake/interactive.pm: make Clear_all work on a LVM VG
-	make Clear_all remove partitions from raids
-
-	* Makefile: create the list_modules symlink
-	make test_pms should now work (was pb with list_modules.pm)
-
-2002/07/08  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* harddrake/ui.pm: 
-	  - remove save_report menu entry, this is done by service_harddrake
-	  - move $in declaration near where it's used
-	eide hard disks : print master/slave for bus_location
-	  - remove dead stuff
-	  - comment some stuff
-	minor simplication
-	various cleanups:
-	  - move all harddrake modules to harddrake namespace
-	 - replace two use by require so that it's not done at compil time
-	   but at runtime
-	 - there was a missing $ in harddrake::ui.pm
-
-	* harddrake/TODO: update todo list
-
-	* install_steps_interactive.pm, standalone/draknet, harddrake/bttv.pm,
-	standalone/harddrake2, standalone/service_harddrake, harddrake/data.pm:
-	various cleanups:
-	  - move all harddrake modules to harddrake namespace
-	 - replace two use by require so that it's not done at compil time
-	   but at runtime
-	 - there was a missing $ in harddrake::ui.pm
-
-	* drakxtools.spec: 
-	  - some stuff moved into Makefile.drakxtools
-	  - fix harddrake menu entry
-	  - fix build
-	fixes for missing files
-	enhanced description
-
-	* modules.pm: 
-	  - s/snd-card/snd/
-	  - make some code clearer
-
-	* Makefile.drakxtools: 
-	  - simplifications
-	  - harddrake support is complete
-
-	* scanner.pm: this doesn't need either "#!/usr/bin/perl" nor "use lib
-	qw(/usr/lib/libDrakX);"
-
-	* standalone/drakxtv: 
-	  - fix options handling
-	  - use "perl -w"
-	  - s/bttv/harddrake::bttv/ due to recent changes
-
-2002/07/07  daouda
-
-	* drakxtools.spec: 
-	  - directory should exist before mv'ing things (mkdir
-	%%buildroot%%_initrddir)
-
-2002/07/07  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: smarter raidAutoStartRaidtab
-	great new raidAutoStartRaidtab allowing to handle existing software
-	raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-
-	* fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
-	software raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-
-	* devices.pm: use c::total_sectors() instead of BLKGETSIZE
-
-	* diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
-	marked dirty on any actions that destroy the raid
-
-2002/07/07  daouda
-
-	* Makefile: 
-	  - remove share/wizard.rc in DISTFILE
-
-	* drakxtools.spec: 
-	  - directory should exist before mv'ing things (mkdir
-	%%buildroot%%_initrddir)
-	  - mv typo in %install section (titi sux)
-
-2002/07/07  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: smarter raidAutoStartRaidtab
-	great new raidAutoStartRaidtab allowing to handle existing software
-	raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-	remove detect_devices::check (including the annoying log about no
-	modules for the pci entry)
-
-	* modules.pm: new "append_to_etc_modules" function
-	remove detect_devices::check (including the annoying log about no
-	modules for the pci entry)
-
-	* fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
-	software raids
-	even when RAID_AUTORUN is not supported by kernel (which is the case for
-	us
-	since md.o is a not builtin the kernel)
-
-	* any.pm: small regexp cleanup
-
-	* fs.pm, partition_table.pm: for greater symmetry with smb, drop isNfs in
-	favour of isThisFs('nfs', ...)
-
-	* interactive_newt.pm: make the buttons work in all cases
-	  - workaround segfaults
-	  - ensure the perl values are set when calling the clicked_may_quit
-	callback
-
-	* devices.pm: use c::total_sectors() instead of BLKGETSIZE
-
-	* diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
-	marked dirty on any actions that destroy the raid
-
-2002/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (ask_users): the user name length must be <= 32
-
-	* diskdrake/interactive.pm (as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* Makefile.config: standalone/drakbug doesn't exist! (why did deush add
-	it???)
-	it is standalone/harddrake2, not standalone/harddrake (poor deush must
-	be loosing his brain :p)
-
-	* diskdrake/hd_gtk.pm: s/check_type/diskdrake::interactive::check_type/
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-	(as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* fsedit.pm: /root and /mnt must "remain within the root filesystem" (ie
-	can't be used as mountpoints), dixit redhat
-	(package_needed_for_partition_type): return the package needed for a
-	partition type
-	(check_type): cleanup
-
-	* install_any.pm (setDefaultPackages): use
-	fsedit::package_needed_for_partition_type to get things like jfsprogs
-
-	* fs.pm: supermount now handles fs=auto, using it :)
-
-	* Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-
-2002/07/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* Makefile.config: add the harddrake service which was missing
-
-	* printer.pm: try to simplify
-
-	* harddrake/ui.pm: simplify: use reverse
-	  - help system:
-	  - add an help entry in help menu;
-	   - begin to describe information fields
-	
-	   - reformat license in about window
-	
-	  - information frame (mostly fixing incoherency between various hw
-	  classes fields)
-	
-	   - s/media type/media class/
-	
-	   - s/info/Hardware id/
-	
-	   - s/device/device file/
-	
-	   - split description into manufacturer/description
-	
-	   - eide devices:
-	
-		  - rename bus as bus_location
-	
-	       - set interface_type as bus
-	
-	   - scsi devices:
-	
-	       - set bus to SCSI
-	
-		  - set bus_location to bus:id fields
-	
-	   - don't print pci subids when non set
-	
-	   - remove fields that were already used above (vendor id subvendor
-	     subid pci_bus pci_device pci_function)
-	
-	  - no need to return window after program exit
-	
-	  - print usage if needed
-	
-	  - embed hardware tree in a "detected hardware" frame
-	
-	  - cleanups:
-	
-	   - rename widget2 as frame
-	
-	   - remove dead commented code
-
-	* drakxtools.spec: add harddrake2 service
-
-	* standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/usb.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/hw_network.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/cd.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/tv.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/modem.png,
-	standalone/icons/harddrake2/K7.png: add harddrake2 icons
-
-2002/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (ask_users): the user name length must be <= 32
-
-	* commands.pm: adapt to new modprobe.pm
-
-	* diskdrake/hd_gtk.pm: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-	(as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-
-	* diskdrake/interactive.pm (as suggested by Alexander Skwar)
-	  - in interactive::check_type, check if the package (like jfsprogs) is
-	installed
-	  - use interactive::check_type where usefull
-	  - cleanup
-	(Resize): resize2fs handles ext3 :)
-
-	* install_any.pm (setDefaultPackages): use
-	fsedit::package_needed_for_partition_type to get things like jfsprogs
-	when merge_fstabs, handle in a different way mtab and fstab (or
-	manualFstab)
-	=> this allows to force the type&options in manualFstab
-
-	* fsedit.pm (package_needed_for_partition_type): return the package needed
-	for a partition type
-	(check_type): cleanup
-
-	* docs/comparisons: various remarks about mandrake
-
-	* partition_table_lvm_PV.pm: Allows people having PVs on unpartitioned
-	disks to install
-	(but no way to create such beasts)
-
-	* Makefile.config: standalone/drakbug doesn't exist! (why did deush add
-	it???)
-	it is standalone/harddrake2, not standalone/harddrake (poor deush must
-	be loosing his brain :p)
-	add harddrake pm's
-
-	* partition_table.pm: Allows people having PVs on unpartitioned disks to
-	install
-	(but no way to create such beasts)
-	cleanup
-
-	* fs.pm: supermount now handles fs=auto, using it :)
-	when merge_fstabs, handle in a different way mtab and fstab (or
-	manualFstab)
-	=> this allows to force the type&options in manualFstab
-
-	* Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: 
-	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
-	  - remove unused wizard.rc
-
-2002/07/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/lsnetdrake: simplify
-
-	* Makefile: add harddrake to DISTFILES
-
-	* printer.pm: try to simplify
-
-	* harddrake/TODO: add bits regarding eide and scsi
-
-	* standalone/harddrake2: add missing 'use lib' due to harddrak::ui changes
-
-	* harddrake/ui.pm: simplify: use reverse
-	  - help system:
-	  - add an help entry in help menu;
-	   - begin to describe information fields
-	
-	   - reformat license in about window
-	
-	  - information frame (mostly fixing incoherency between various hw
-	  classes fields)
-	
-	   - s/media type/media class/
-	
-	   - s/info/Hardware id/
-	
-	   - s/device/device file/
-	
-	   - split description into manufacturer/description
-	
-	   - eide devices:
-	
-		  - rename bus as bus_location
-	
-	       - set interface_type as bus
-	
-	   - scsi devices:
-	
-	       - set bus to SCSI
-	
-		  - set bus_location to bus:id fields
-	
-	   - don't print pci subids when non set
-	
-	   - remove fields that were already used above (vendor id subvendor
-	     subid pci_bus pci_device pci_function)
-	
-	  - no need to return window after program exit
-	
-	  - print usage if needed
-	
-	  - embed hardware tree in a "detected hardware" frame
-	
-	  - cleanups:
-	
-	   - rename widget2 as frame
-	
-	   - remove dead commented code
-
-	* harddrake/data.pm: add a configurator for sound
-
-	* standalone/icons/harddrake2/cable.png,
-	standalone/icons/harddrake2/tape.png,
-	standalone/icons/harddrake2/usb.png,
-	standalone/icons/harddrake2/hw_network.png,
-	standalone/icons/harddrake2/unknown.png,
-	standalone/icons/harddrake2/hw_printer.png,
-	standalone/icons/harddrake2/scanner.png,
-	standalone/icons/harddrake2/isdn.png,
-	standalone/icons/harddrake2/cd.png,
-	standalone/icons/harddrake2/scsi.png,
-	standalone/icons/harddrake2/hw_mouse.png,
-	standalone/icons/harddrake2/K7.png,
-	standalone/icons/harddrake2/webcam.png,
-	standalone/icons/harddrake2/harddrake.png,
-	standalone/icons/harddrake2/keyboard.png,
-	standalone/icons/harddrake2/ide_hd.png,
-	standalone/icons/harddrake2/harddisk.png,
-	standalone/icons/harddrake2/joystick.png,
-	standalone/icons/harddrake2/video.png,
-	standalone/icons/harddrake2/memory.png,
-	standalone/icons/harddrake2/scsi_hd.png,
-	standalone/icons/harddrake2/floppy.png,
-	standalone/icons/harddrake2/sound.png,
-	standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/cpu.png,
-	standalone/icons/harddrake2/modem.png: add harddrake2 icons
-
-2002/07/05  daouda
-
-	* Makefile.config: 
-	  - add harddrake drakbug drakTermServ to STANDALONEPMS_
-
-	* drakxtools.spec: 
-	  - snapshot
-	  - new entries:
-	o harddrake2 : new hardware detection && configuration tool
-		o drakbugreport: bug reporting tool a la Kde (not working!)
-		o drakTermServ : configuration tool for diskless stations.
-
-2002/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (prepare_write_fstab): for supermount, have "none" as the device
-	(cleaner, and
-	more coherent with the "supermount" script (tx to FredC))
-
-2002/07/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* install_steps_interactive.pm: minimize startup: only load
-	harddrake::bttv if the user click on "tv
-	card" field in the hw summary window
-	use harddrake::bttv to let people configure their tv card if it's
-	misdetected
-
-	* harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
-	a module)
-	POSIX is no more used too.
-
-	* harddrake/bttv.pm: remove device test: there're only two harddrake::bttv
-	users,
-	install_steps_interactive.pm and drakxtv which both have already
-	tested that a bttv managed tv card is there.
-	  - add more tv cards
-	  - enable users to select number of buffers for mmap()
-	  - better description for pll setting
-	
-	  - add tooltips help for some entries
-	tv cards list:
-	
-		- split multi-cards entries
-	
-	     - reverse the hash (needed since now bttv card types are not
-	       anymore unique)
-	
-		- complete the list from various sources
-	
-		- use a tree to display the list, it's clearer now since it's
-	       splitted by vendors
-	
-	  - longer message
-	  - remove uneeded stuff for modules ("#!/..", "use lib..", "use
-	  standalone", ...)
-	
-	  - simplify bttv options managment:
-	
-	   - use if_, thanks MDK::Common
-	
-	   - s/mapn/map by using a hash at first
-	
-	   - s/mapn{if}/map{if_}
-	
-	  - don't read/write modules.conf here, drakx take care of that for us
-	
-	thus, the test program became:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use bttv;
-	use interactive;
-	use modules;
-	
-	modules::read_conf;
-	bttv::config('interactive'->vnew());
-	modules::write_conf;
-	spec29: bttv configuration part of drakxtv.
-	it can be used by:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use harddrake::bttv;
-	use interactive;
-	
-	bttv::config('interactive'->vnew());
-
-	* drakxtools.spec: fix typo
-	fix dirs1/dirs2 mismatch
-	  - M-q descriptions
-	  - simplify file lists building
-	  - we can use several -f on one "%%files" line
-
-	* standalone/drakxtv: if we're root and there's a tv card managed by bttv,
-	offer to
-	configure bttv trough harddrake::bttv
-
-	* tools/cvslog2changelog.pl: typo fix
-
-	* harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: 
-	  - handle /lib/i686 case
-	  - replace Mandrake/RPMS with Mandrake/RPMS*
-
-2002/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/config.h,
-	mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/pcmcia/tcic.h,
-	mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c:
-	pcmcia is now pcmcia_ (it was to begin with a clean branch of unmodified
-	sources)
-
-2002/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: make it work with "use
-	strict"
-	do not look at the mar files anymore, only use kernel/modules.pl (and so
-	list_modules.pm)
-
-	* diskdrake/interactive.pm: handle comments in fstab
-
-	* fs.pm (merge_info_from_fstab): try to keep options from merged fstab IF
-	the entry is for the same mountpoint AND the same device
-	handle comments in fstab
-
-	* share/rpmsrate: add gnupg in "4 SYSTEM", so that rpm do not *Require*
-	gnupg, only suggest it very strongly :)
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: 
-	  - do not use mar files for the list of modules, use list_modules.pm
-	via kernel/modules.pl instead
-	  - use read_pcitable to parse usbtable
-
-2002/07/05  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
-	a module)
-	POSIX is no more used too.
-
-	* drakxtools.spec: fix typo
-	fix dirs1/dirs2 mismatch
-	  - M-q descriptions
-	  - simplify file lists building
-	  - we can use several -f on one "%%files" line
-	  - add preliminary harddrake support
-	
-	  - clean %post
-	
-	  - bump version number
-
-	* harddrake/bttv.pm: 
-	  - remove uneeded stuff for modules ("#!/..", "use lib..", "use
-	standalone", ...)
-	  - simplify bttv options managment:
-	
-	   - use if_, thanks MDK::Common
-	
-	   - s/mapn/map by using a hash at first
-	
-	   - s/mapn{if}/map{if_}
-	
-	  - don't read/write modules.conf here, drakx take care of that for us
-	
-	thus, the test program became:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use bttv;
-	use interactive;
-	use modules;
-	
-	modules::read_conf;
-	bttv::config('interactive'->vnew());
-	modules::write_conf;
-	spec29: bttv configuration part of drakxtv.
-	it can be used by:
-	
-	#!/usr/bin/perl
-	
-	use strict;
-	use lib qw(/usr/lib/libDrakX);
-	
-	use standalone;
-	use harddrake::bttv;
-	use interactive;
-	
-	bttv::config('interactive'->vnew());
-
-	* Makefile: don't use sed when not needed
-
-	* install_steps_interactive.pm: minimize startup: only load
-	harddrake::bttv if the user click on "tv
-	card" field in the hw summary window
-	use harddrake::bttv to let people configure their tv card if it's
-	misdetected
-
-	* harddrake/data.pm: remove uneeded "#!/.." and "use lib"
-
-2002/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
-	printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
-	install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
-	modules.pm
-
-	* c/stuff.xs.pm: adapt to new ldetect
-
-	* modules.pm: reworked, cleaned:
-	  - the list of modules is moved to kernel/list_modules.pm (and a few
-	functions too)
-	  - new "add_probeall" function (similar to "add_alias")
-	  -> used for scsi_hostadapter and usb-interface
-	  - "load_multi" removed in favour of "load" which is now more powerful
-	  - load_thiskind renamed load_category
-	  - get_that_type renamed probe_category
-	  - %modules::drivers dropped (handled for list_modules)
-	still more cleanup to come
-
-	* rescue/make_rescue_img: adapt to the move all.modules ->
-	kernel/all.modules  and  all.kernels -> kernel/all.kernels
-
-	* modparm.pm: rework, cleanup, simplify and make it work
-
-	* install2: create symlink list_modules.pm in current directory for
-	testing purpose
-
-	* Makefile: when building the tar for drakxtools, handle specially
-	list_modules.pm
-	adapt to the move all.modules -> kernel/all.modules  and  all.kernels ->
-	kernel/all.kernels
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
-	containing:
-	  - all.modules all.kernels update_kernel
-	  - part of perl-install/modules.pm now in kernel/list_modules.pm and
-	kernel/modules.pl
-	  - update_kernel cleaned (it doesn't mention module names anymore, it
-	is now in kernel/modules.pl)
-	  - cleanup Makefile
-	  - mdk-stage1 doesn't depend on perl-install anymore
-	(more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
-	* any.pm: reworked & cleaned the kernel modules part
-	  - adapt to new modules.pm
-	  - adapt to new modparm.pm
-	  - renamed setup_thiskind to load_category
-	  - renamed setup_thiskind_backend to load_category_no_message
-
-	* share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04  daouda
-
-	* standalone/draknet: 
-	  - don't display clear password
-
-2002/07/04  fcrozat
-
-	* share/rpmsrate: Fix GNOME2 packages
-	Install urw-fonts when installing XFree
-
-2002/07/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/fr.po: updated French file
-
-	* lang.pm: Changed some languages to defautl to utf-8
-	removed X11_NOT_LOCALIZED (now Gnome2 fully supports right-to-left
-	languages)
-
-2002/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
-	printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
-	install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
-	modules.pm
-
-	* c/stuff.xs.pm: adapt to new ldetect
-
-	* modules.pm: reworked, cleaned:
-	  - the list of modules is moved to kernel/list_modules.pm (and a few
-	functions too)
-	  - new "add_probeall" function (similar to "add_alias")
-	  -> used for scsi_hostadapter and usb-interface
-	  - "load_multi" removed in favour of "load" which is now more powerful
-	  - load_thiskind renamed load_category
-	  - get_that_type renamed probe_category
-	  - %modules::drivers dropped (handled for list_modules)
-	still more cleanup to come
-
-	* getpkgs_deps, do_resize_fat: removed since unused
-
-	* Makefile, rescue/make_rescue_img: adapt to the move all.modules ->
-	kernel/all.modules  and  all.kernels -> kernel/all.kernels
-
-	* modparm.pm: rework, cleanup, simplify and make it work
-
-	* install2: create symlink list_modules.pm in current directory for
-	testing purpose
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
-	containing:
-	  - all.modules all.kernels update_kernel
-	  - part of perl-install/modules.pm now in kernel/list_modules.pm and
-	kernel/modules.pl
-	  - update_kernel cleaned (it doesn't mention module names anymore, it
-	is now in kernel/modules.pl)
-	  - cleanup Makefile
-	  - mdk-stage1 doesn't depend on perl-install anymore
-	(more precisely mdk-stage1/pci-resource/update-pci-ids.pl)
-
-	* tools/specific_arch: simplified using MDK::Common
-
-	* any.pm: reworked & cleaned the kernel modules part
-	  - adapt to new modules.pm
-	  - adapt to new modparm.pm
-	  - renamed setup_thiskind to load_category
-	  - renamed setup_thiskind_backend to load_category_no_message
-
-	* share/po/Makefile: make the "clean" rule less verbose
-
-2002/07/04  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* harddrake/TODO: add harddrake2 todo list
-
-	* harddrake/data.pm: get rid of 'use vars'
-	remove wait_message hack for printerdraker, better use class_discard
-	harddrake2: "the return of the vengeance son"
-	  - harddrake/data.pm: the data structure
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-	* harddrake/ui.pm: don't stack signals on config buttons
-	  - remove no more used @pid_launched
-	  - better GUI reactivity: don't wait for config tool to complete, just
-	  "fork and forget" [(c) us air force] and refuse to run another
-	  config tool until the first one to complete
-	print "Running $configurator ..." in status bar while running a config
-	tool
-	  - POSIX is needed for POSIX::wait
-	  - move strict and standalone require at top
-	
-	  - c is unused
-	
-	  - comment exceptions in devices loop (ie skip classes without any
-	  devices or any detector
-	
-	  - optimize away $pid
-	fix move from harddrake.pm to harddrake/data.pm:
-	
-	  - menu does appear
-	
-	  - information fields are translated from raw to english again
-	harddrake2: "the return of the vengeance son"
-	
-	  - harddrake/data.pm: the data structure
-	
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-	* detect_devices.pm: add tapes() for harddrake2
-
-	* standalone/harddrake2, standalone/service_harddrake: harddrake2: "the
-	return of the vengeance son"
-	  - harddrake/data.pm: the data structure
-	  - harddrake/ui.pm: the ui code
-	
-	  - standalone/service_harddrake: the init.d service (which need a few
-	polishing (timeout, ...)
-	
-	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied
-
-2002/07/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: fixed static definition when non static
-	declaration (gcc limitation).
-	added conditional code around network detection.
-
-2002/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/minilibc.c,
-	mdk-stage1/newt/newt.c, mdk-stage1/bzlib/bzlib.c,
-	mdk-stage1/newt/listbox.c, mdk-stage1/newt-frontend.c,
-	mdk-stage1/disk.c, mdk-stage1/modules.c, mdk-stage1/stage1.c,
-	mdk-stage1/newt/checkboxtree.c, mdk-stage1/mar/mar-frontend.c,
-	mdk-stage1/Makefile.common, mdk-stage1/url.c, mdk-stage1/newt/textbox.c,
-	mdk-stage1/newt/grid.c, mdk-stage1/dhcp.c, mdk-stage1/init.c,
-	mdk-stage1/automatic.c, mdk-stage1/newt/entry.c: compile with -W
-
-2002/07/02  daouda
-
-	* my_gtk.pm: 
-	  - fill a combo by default :
-	gtkcombo_setpopdown_strings($combo_widget,@strings)
-
-2002/07/02  gbeauchesne
-
-	* c/smp.c: 
-	  - TODO: Update ia64 check with /proc/pal/cpuX ?
-	  - TODO: Update x86_64 check when SMP machines are actually available
-	  - Conditionalize compilation of main() with TEST macro
-
-2002/07/02  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: try harder to find the full list of servers available,
-	using "smbclient -L" to
-	check the workgroup masters
-
-2002/07/01  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm (raw_hd_mount_point): nicer default mount point
-
-2002/06/28  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, network/smb.pm, network/smbnfs.pm: 
-	  - add authentification in diskdrake --smb (esp. for windows NT)
-	  - use "credentials=" to put the passwords
-	(ideas and investigations from Stew Benedict,
-	integrated by Pixel, but need testing)
-	Known bug: if you want to change the password when there are 2 entries
-	in fstab
-	  using the same username=/password=, writing the credentials is done in
-	random order,
-	  => you've got one chance in 2 that the password is changed :-(
-
-	* fs.pm: 
-	  - add authentification in diskdrake --smb (esp. for windows NT)
-	  - use "credentials=" to put the passwords
-	(ideas and investigations from Stew Benedict,
-	integrated by Pixel, but need testing)
-	Known bug: if you want to change the password when there are 2 entries
-	in fstab
-	  using the same username=/password=, writing the credentials is done in
-	random order,
-	  => you've got one chance in 2 that the password is changed :-(
-	handle spaces in mount points and devices (using \040)
-
-2002/06/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakTermServ, standalone/icons/drakTS.620x57.png: Add
-	drakTermServ application and icon.
-
-2002/06/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm: ensure
-	licence step is asked in any case (ie. even when selectLanguage is
-	automatic)
-
-	* any.pm: "my" variables where needed
-
-2002/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po, share/po/ar.po: Updated po files
-
-2002/06/19  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Makefile: corrected rules to make distributable rpms.
-
-2002/06/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* patch/patch-oem-hp.pl: added patch-oem.pl file used to generate HP
-	Mandrake Linux 8.2.
-
-2002/06/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: remove a few drivers so that hd.img and network.img are
-	possible with latest BOOT kernel
-
-2002/06/19  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: use "wide links = no" for exporting via samba
-	(thanks to Jan Sch�fer)
-
-	* fs.pm: mounting of ntfs after install really mount the partition (thanks
-	to Buchan Milne)
-
-2002/06/18  daouda
-
-	* my_gtk.pm: 
-	  - add gtkset_text, gtkprepend_text, gtkappend_text for entry widgets
-
-2002/06/18  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Makefile.drakxtools: manage security subdir.
-
-	* Makefile: added targets to build test and distribution rpms and srpms
-	(localrpm,
-	localsrpm, rpm, srpm).
-	added security to the installed directories
-
-	* pam.net_monitor, diskdrake/diskdrake.html, drakxtools.spec,
-	apps.net_monitor: ripped from the srpm
-
-2002/06/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2002/06/17  cbelisle
-
-	* standalone/draksec: added server, user and network advanced options
-
-	* any.pm: draksec: customize entries for each options (lists, checkboxes
-	and text boxes)
-	Added user,server and network advanced options
-
-	* security/msec.pm: 
-	  - Customize entries for each options (checkboxes, text boxes and
-	lists)
-	added network, server and user advanced options
-
-2002/06/15  alus
-
-	* share/po/pl.po: updates
-
-2002/06/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Catalan doesn't have French fallback anymore
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/06/11  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: added /tmp in @suggestions_mntpoints (as suggested by
-	Philippe Coulon)
-
-2002/06/10  cbelisle
-
-	* standalone/draksec: Add an entry for the security user email
-
-	* security/msec.pm: Initial commit
-
-	* any.pm: Add security user email entry in draksec
-
-2002/06/10  daouda
-
-	* network/tools.pm: 
-	  - choose country according to timezone.
-
-2002/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/syncrpms: english fix
-
-2002/06/10  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: s/class/class_/ for ldetect 0.4
-
-2002/06/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* timezone.pm: remove duplicate entry in ntp_servers
-
-	* interactive_gtk.pm, my_gtk.pm: split ask_browse_tree_info from
-	interactive_gtk
-	to my_gtk between widgets creation and real
-	stuff so that we can now call it with widgets
-	places differently
-
-2002/06/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated po file
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: adapt to new lilo
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-	* bootloader.pm: adapt to new lilo
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
-	install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
-	fixes thx to vincent meyer
-
-2002/06/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
-	instead of weird style
-	with clearall unset & auto_allocate set
-
-2002/05/29  alus
-
-	* share/po/pl.po: little fixes
-
-2002/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm: remove typo fix when it's not a fix :-)
-	small typo
-	remove typo (hopefully really a typo ;p)
-
-	* any.pm: be a bit more polite
-
-2002/05/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: make sure patch is always read after defcfg to take
-	precedance.
-
-2002/05/27  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15  alus
-
-	* share/po/Changelog: info about polish translation
-
-2002/05/14  alus
-
-	* share/po/pl.po: polish finished
-	updated polish translation
-	polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13  alus
-
-	* share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libbzip2* and more explanations about failing compilation
-
-	* mdk-stage1/Makefile, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/probing.c:
-	adapt to gcc-3.1
-
-2002/05/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
-	* share/po/eu.po: small corrections
-
-2002/04/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: support USB2 controllers as
-	well
-
-2002/04/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed some machine with two present i830 CGC but only
-	one in reality.
-
-	* detect_devices.pm: updated usbMice to take care of device declared as
-	Mouse:USB in usbtable (was
-	not the case !)
-
-2002/04/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootlook.pm: a few english fixes
-
-	* any.pm: fixes
-	english fixes from v meyer
-	a few english fixes thx to vincent meyer
-
-2002/04/19  alus
-
-	* share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-	* share/po/hu.po: updated po file
-
-2002/04/18  alus
-
-	* share/po/pl.po: 3 more long messages
-	one entry
-	stil working....
-
-2002/04/17  alus
-
-	* share/po/pl.po: Mostly finished polish translation
-	translations, fixes etc...
-
-2002/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: final candidate.
-
-	* rescue/tree/etc/oem: final candidate.
-	add gcc-cpp to oem install.
-
-2002/04/16  alus
-
-	* share/po/pl.po: still working
-	Few fixes
-	Updated translation. Many strings is not yet translated...
-
-2002/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: sync with oem-prepare
-	fixed stupid error.
-	forget packdrake module invocation.
-	fixed to support non standard rpm filename.
-
-	* tools/oem-prepare: add gcc-cpp to always installed.
-	disable unselection of some package (gmc, all gcc3.0 stuff).
-
-2002/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: only main version of automake
-
-2002/04/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated po file
-
-2002/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
-	dialog box
-
-2002/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: Another small fix
-	Small corrections
-
-2002/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/mt.po: updated Maltese file
-
-2002/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: small typo correction
-
-2002/04/10  warly
-
-	* share/rpmsrate: autofs -> 2
-
-2002/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
-	and iptables
-	packages conflict
-
-2002/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm, partition_table_gpt.pm,
-	partition_table_empty.pm, partition_table_bsd.pm,
-	partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
-	error message (thanks to Brian J. Murrell)
-
-2002/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed a bunch of things
-
-	* install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
-	partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
-	printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
-	network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
-	network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
-	strings
-
-2002/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
-	drakfloppy strings
-
-2002/04/07  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakfloppy: moving from his own rpm to drakxtools
-
-	* Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  sdupont
-
-	* standalone/drakbackup: please yduret, do not commit these changes on cvs
-	before to test it.
-	you can say "bugs fixes" only if you have corrected  some errors but not
-	if you create it!
-	the backup on cd was disabled because the backend is not available for
-	moment.
-
-	* standalone/drakfont: remove uninteresting yduret changes,
-	would it be possible to know what are your "bugs fixies" ?
-	to yduret: I'm the creator of this program so please do not remove my
-	changes.
-
-2002/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs
-
-2002/06/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
-	install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
-	fixes thx to vincent meyer
-
-2002/06/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
-	instead of weird style
-	with clearall unset & auto_allocate set
-
-2002/05/29  alus
-
-	* share/po/pl.po: little fixes
-
-2002/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm: remove typo fix when it's not a fix :-)
-	small typo
-	remove typo (hopefully really a typo ;p)
-
-	* any.pm: be a bit more polite
-
-2002/05/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: make sure patch is always read after defcfg to take
-	precedance.
-
-2002/05/27  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: have usb-interface1 for ehci-hcd
-
-2002/05/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Xconfigurator.pm: dams fixes a bug in the install :-)
-
-2002/05/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: xtraceroute needs 3d
-
-2002/05/15  alus
-
-	* share/po/Changelog: info about polish translation
-
-2002/05/14  alus
-
-	* share/po/pl.po: polish finished
-	updated polish translation
-	polish updated to near finished. Fuzzy removed and checked
-
-2002/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libncurses* also for the sucking neuneux
-
-2002/05/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po, share/po/id.po: updated po file
-
-2002/05/13  alus
-
-	* share/po/pl.po: mostly finished polish translation.!!
-
-2002/05/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* docs/HACKING: libbzip2* and more explanations about failing compilation
-
-	* mdk-stage1/Makefile, mdk-stage1/probing.c: adapt to gcc-3.1
-
-2002/05/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Put back xcin as default XIM for zh_TW.Big5
-
-	* share/po/eu.po: small corrections
-
-2002/04/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/hu.po: updated po files
-
-2002/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed some machine with two present i830 CGC but only
-	one in reality.
-
-	* detect_devices.pm: updated usbMice to take care of device declared as
-	Mouse:USB in usbtable (was
-	not the case !)
-
-2002/04/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/04/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootlook.pm: a few english fixes
-
-	* any.pm: fixes
-	english fixes from v meyer
-	a few english fixes thx to vincent meyer
-
-2002/04/19  alus
-
-	* share/po/pl.po: It's only about 100 entries to the end
-
-2002/04/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-	* share/po/hu.po: updated po file
-
-2002/04/18  alus
-
-	* share/po/pl.po: 3 more long messages
-	one entry
-	stil working....
-
-2002/04/17  alus
-
-	* share/po/pl.po: Mostly finished polish translation
-	translations, fixes etc...
-
-2002/04/16  alus
-
-	* share/po/pl.po: still working
-	Few fixes
-	Updated translation. Many strings is not yet translated...
-
-2002/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: only main version of automake
-
-2002/04/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated po file
-
-2002/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
-	dialog box
-
-2002/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: ipchains now conflicts with iptables
-
-2002/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: Another small fix
-	Small corrections
-
-2002/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ro.po: merged with drakfloppy strings
-
-2002/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/mt.po: updated Maltese file
-
-2002/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: small typo correction
-
-2002/04/10  warly
-
-	* share/rpmsrate: autofs -> 2
-
-2002/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
-	and iptables
-	packages conflict
-
-2002/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm, partition_table_gpt.pm,
-	partition_table_empty.pm, partition_table_bsd.pm,
-	partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
-	error message (thanks to Brian J. Murrell)
-
-2002/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed a bunch of things
-
-	* install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
-	partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
-	printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
-	network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
-	network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
-	strings
-
-2002/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
-	drakfloppy strings
-
-2002/04/07  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakfloppy: moving from his own rpm to drakxtools
-
-	* Makefile.config: add drakfloppy to STANDALONEPMS_
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  sdupont
-
-	* standalone/drakbackup: please yduret, do not commit these changes on cvs
-	before to test it.
-	you can say "bugs fixes" only if you have corrected  some errors but not
-	if you create it!
-	the backup on cd was disabled because the backend is not available for
-	moment.
-
-	* standalone/drakfont: remove uninteresting yduret changes,
-	would it be possible to know what are your "bugs fixies" ?
-	to yduret: I'm the creator of this program so please do not remove my
-	changes.
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt
-
-2002/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
-	doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
-	doesn't use $ENV{SECURE_LEVEL} anymore
-
-2002/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: do not have "root=" with no root (needed for memtest)
-	(thanks to Borsenkow Andrej)
-
-	* share/rpmsrate: add tmpwatch (since it is not mandatory any more)
-
-2002/03/30  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakfont: bugs fixes, code clean up,
-	more mdkish..
-
-2002/03/26  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Fixed several problems related to HP
-	multi-function devices:
-	  - Parallel multi-function devices worked only on the first (onboard)
-	parallel
-	port.
-	  - HP LaserJet 2200 needs HPOJ for printing via USB.
-	  - For the HP OfficeJet D series the scanning instructions were not
-	shown.
-	  - HPOJ does not work with HP PhotoSmart 10xx, 11xx, and 12xx.
-
-2002/03/22  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: cleaned gtkpowerpack
-
-2002/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: use /root rather than /tmp for some temp files (security
-	suxx)
-
-2002/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list: rpm 4.0.4
-
-	* mdk-stage1/network.c: don't save DHCP_HOSTNAME if the value is void
-
-2002/03/20  sdupont
-
-	* standalone/drakfont: fixing problems
-	exchanging: ttmkfdir by  /usr/X11R6/bin/mkttfdir
-	which generate correct fonts.dir
-
-	* standalone/drakbackup: remove backup on cd
-
-2002/03/20  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: use log for what is not related to explanations
-
-2002/03/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/updatehdlist: take care of commercial medium (not syncable).
-
-2002/03/19  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: 
-	  - default tv norm is pal rather than ntsc (because of alphabetical
-	sort) since it's the most used tv norm
-	  - figure out tv norm & country (aka frequency table) from locales
-	
-	  - add a hash based on lang in order to do this
-	
-	  - add --no-guess if one doesn't want drakxtv to automagically guess tv
-	  norm and geographic area through locales (lang.pm)
-	
-	  - log with standalone::explanations:
-	
-		 - guessed values from locales: language, tv norm and country
-	
-		 - runned command to scan for tv channels
-	
-	  	 - ~/.xawtv creation
-	
-	
-	  - s/bcast/broadcast/ in displayed messages
-	
-	  - add -h and --help support
-
-2002/03/18  dam's  <damien@mandrakesoft.com>
-
-	* install_gtk.pm, mouse.pm, my_gtk.pm: corrected create_xpm API
-
-2002/03/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed to support rpm filename incoherent to standard
-	naming for commercial
-	packages (commercial are *really* shit (almost, for the hope) all the
-	time ?)
-
-2002/03/16  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
-	connection.
-
-2002/03/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/ar.po: updated po file
-
-2002/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/16  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
-	connection.
-
-2002/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* network/ethernet.pm: small cleanup on untested code (need testing:)
-
-2002/03/15  fabman
-
-	* share/po/es.po: updated bad lilo/grub/yaboot translation
-	updated spanish translations
-
-2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: force mkinitrd *really* for bootsplash.
-	force initrd regeneration for oem on some case (maybe the cause of
-	bootsplash
-	perturbation, as maintainer don't even known why it is running correctly
-	:-)
-
-	* pkgs.pm: do not try to get synthesis if hdlist is available as an handle
-	on file (typical
-	for updates).
-
-	* share/rpmsrate: remove doublon on NVIDIA_nforce.
-	update to 6mdk for NVIDIA_nforce*
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: yet again add some dropped entities from drakx-help.xml
-	add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
-
-	* install_steps_interactive.pm: 
-	  - remove obsolete code
-	  - the result is to use directly $availableC instead $size2install
-	which was min($availableC, $max_size)
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: do not try to get synthesis if hdlist is available as an handle
-	on file (typical
-	for updates).
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: yet again add some dropped entities from drakx-help.xml
-	add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
-	s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
-	drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/15  dam's  <damien@mandrakesoft.com>
-
-	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
-	the way we wrap for the advertising
-
-	* install_steps_gtk.pm: submitting widget instead of style (style/font
-	initialization bug from gtk
-
-	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
-	handling of ugly language (/ja|zh/)
-
-2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
-	@euro appended for 8.1).
-
-2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
-	ones
-
-2002/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
-	drakx-help.xml not merged)
-
-	* keyboard.pm (unpack_keyboards): return undef on error
-
-2002/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po: updated po file
-
-2002/03/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakxtv: english
-
-2002/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/da.po, share/po/no.po: updated po files
-
-	* share/po/eu.po: updated po file
-
-	* lang.pm: changed LANGUAGE for basque
-
-	* share/po/ja.po: added \n in advertising
-
-2002/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: CHARSET"iso-8859-1" and CHARSET"iso-8859-15" is no good
-	for english which has CHARSET"C", adding it
-
-	* share/rpmsrate.server: obsolete
-
-2002/03/14  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: 
-	  - add SECAM to france description to ease user comprehension
-	  - remove unused variables
-	  - revert gc & dam's (also known as the usual suckers) garbage
-	  who'ven't the hardware to test:
-	
-		- explain in source why we don't try to install xawtv (see below)
-	
-		- just display a message if xawtv isn't installed
-		  since drakx should have installed it
-	
-		- let it be runned as root again (how many times i'm
-		  supposed to restore this behaviour)
-	
-		- retest with a tv card
-	
-	  - use %ENV rather than relying on shell ~ expansion
-	
-	  - if tv card wasn't detected, ask the user to spam us
-	
-	  - factorize $in->exit() out of scan4tvchannels()
-	
-	  - add to TODO list the possibility to install xawtv if needed
-	
-	  - check scantv return value and display an error message
-	
-	  - also if the wrapper was runned on console, display a nice
-	  message saying one can now run xawtv under X11
-
-2002/03/14  warly
-
-	* share/rpmsrate: add commercial apps
-
-2002/03/14  Yves Duret <yduret@mandrakesoft.com>
-
-	* standalone/logdrake: fix some bug
-	fix * bug in field matching/ not matching
-
-2002/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: sync with oem (removed mach32 server).
-	sync with oem.
-	remove bzflag.
-	synced with oem script.
-
-	* rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
-	remove Mach8 and Mono driver for oem only.
-	remove bzflag.
-	fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-2002/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: sync with oem (removed mach32 server).
-	sync with oem.
-	remove bzflag.
-	synced with oem script.
-
-	* rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
-	remove Mach8 and Mono driver for oem only.
-	remove bzflag.
-	fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-2002/03/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/eu.po: updated po files
-
-2002/03/13  warly
-
-	* share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed closure selection on sub groups (like 3D),
-	moved some big package out of oem,
-	minor fixes.
-
-	* tools/oem-prepare: synced with oem script.
-
-2002/03/13  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add openoffice with weight = 2
-
-2002/03/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/vi.po, share/po/cs.po, share/po/hu.po,
-	share/po/eu.po: updated po files
-
-	* lang.pm: small console font changes
-	set default console fotns for latin1/0 to lat1-16 and lat0-16;
-	the font lat0-sun16 is missing some chars of iso-8859-1/15 !
-
-2002/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: add gcc and gcc-c++ in @preferred
-
-2002/03/13  warly
-
-	* share/rpmsrate: add aspell-fr and en for gabber require
-
-2002/03/12  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: onboot option only in expert mode
-	corrected domainname bug; added onboot option
-
-2002/03/12  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup, standalone/drakfont: minor bug correction
-
-	* standalone/net_monitor: greater timeout
-
-	* network/tools.pm, network/netconnect.pm: changed timeout for testing
-	internet connection
-
-2002/03/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: remove synthesis if not found (filesize is 0)
-
-	* Xconfigurator.pm: avoid Utah GLX only if > 800MB, not if <= 800MB (!)
-
-	* install_any.pm: added fix to support update hdlist renaming (ie hdlist
-	of update are always hdlist.cz).
-	remove old synthesis file, to make sure gzip can build a new one.
-
-	* share/rpmsrate: added nforce support (hack by adding kernel version
-	inside)
-
-2002/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/ga.po: fixed email address
-
-	* share/po/zh_TW.po: updated po file
-
-2002/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, bootloader.pm: don't have "quiet" boot in the server
-	meta_class
-
-	* pkgs.pm: "fam" is not a naughtyServers
-	remove the old "boa" comment
-	adapt naughtyServers for 8.2
-
-2002/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few missing translations
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt.po, share/po/ga.po, share/po/de.po, share/po/az.po,
-	share/po/pt_BR.po, share/po/nl.po, share/po/ja.po, share/po/id.po,
-	share/po/ar.po, share/po/mt.po, share/po/eo.po, share/po/da.po: updated
-	po files
-
-	* share/po/eu.po, share/po/it.po: updated po files
-	merged with new strings from manuals
-
-	* share/po/DrakX.pot, share/po/fr.po: merged with new strings from manuals
-
-	* share/po/be.po, share/po/bg.po, share/po/et.po, share/po/hr.po,
-	share/po/ko.po, share/po/is.po, share/po/pl.po, share/po/no.po,
-	share/po/fi.po, share/po/el.po, share/po/lt.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/bs.po,
-	share/po/cs.po, share/po/af.po: updated po files (finished merging with
-	manual strings)
-	updated po files
-
-	* share/po/hu.po: updated po files
-	updated po files
-
-	* share/po/cy.po: updated po file
-	updated po files
-
-	* share/po/es.po: updated Spanish
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/sr.po, share/po/tr.po,
-	share/po/ru.po, share/po/wa.po, share/po/sv.po, share/po/th.po,
-	share/po/sk.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
-	share/po/ro.po, share/po/zh_TW.po: updated po files (finished merging
-	with manual strings)
-
-2002/03/11  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.config: added drakproxy
-
-	* standalone/drakxtv: added embedded mode
-
-2002/03/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: for updates, make tree as flat instead in order to
-	see all packages.
-
-2002/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: webmin: 3
-
-	* standalone/drakxtv: 
-	  - install xawtv when necessary instead of
-	telling people to use urpmi (titi sucks)
-	  - prints out a message when no tv card
-	has been detected
-
-	* share/po/fr.po: small ortograf
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/it.po, share/po/eu.po: merged with new strings
-	from manuals
-
-	* share/po/DrakX.pot: merged with new strings from manuals
-	updated GErman file
-
-	* share/po/de.po: updated GErman file
-
-	* share/po/es.po: updated Spanish
-
-2002/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (fullname2mouse): workaround when "1 Button" is not found
-
-	* install_steps.pm, install2.pm: 
-	  - default security level now set in miscellaneousBefore
-	  - default security level is 3 in meta_class server
-
-	* install_any.pm: 
-	  - fix the setting of compssUsersChoices in auto_install when it is
-	empty
-	  - set the default compssUsersChoices adapted to the server meta_class
-
-	* share/rpmsrate: remove phpgroupware from OFFICE (since it appeas twice,
-	the rate is 4, and it requires apache, and ...)
-
-	* Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
-	* install_steps_gtk.pm: 
-	  - remove the hack for not displaying Utilities in classic meta_class
-	  - new compssUsers groups for the server meta_class
-
-	* share/compssUsers: remove "Utilities" here instead of removing it
-	hackily in install_steps_gtk
-
-	* share/compssUsers.server: fix the path=Utilities for the Utilities
-	section
-
-2002/03/11  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Small text fix.
-	Security fix: Give a warning that SMB passwords can easily be revealed
-	by normal users when printing on a Windows-hosted printer is set up.
-
-	* detect_devices.pm: Reverted parts of the last change, they broke in
-	non-DevFS environments (e. g. during installation).
-
-2002/03/11  warly
-
-	* share/rpmsrate: add bwbserver_linux in rpmsate for BeeWeb server
-
-	* share/compssUsers.server: remove ICEWM choice
-
-2002/03/11  Yves Duret <yduret@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: added yduret entry in user.
-
-2002/03/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: add Rage Mobility as bad card for XF4 (was already bad
-	card for XF3) (g�g� report).
-
-2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/de.po, share/po/DrakX.pot: updated GErman file
-
-2002/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm (Mount_point): when files exist in the chosen
-	mount point, propose migration
-
-	* install_steps_interactive.pm: search /commercial/i instead of
-	/Application/ before showing the commercial license
-
-	* standalone/drakboot, bootloader.pm: fix Stew sucks
-
-	* install2.pm, install_steps.pm: 
-	  - default security level now set in miscellaneousBefore
-	  - default security level is 3 in meta_class server
-
-	* install_steps_gtk.pm: 
-	  - remove the hack for not displaying Utilities in classic meta_class
-	  - new compssUsers groups for the server meta_class
-	search /commercial/i instead of /Application/ before showing the
-	commercial license
-
-	* install_any.pm: 
-	  - fix the setting of compssUsersChoices in auto_install when it is
-	empty
-	  - set the default compssUsersChoices adapted to the server meta_class
-
-	* Makefile: upload the various compssUsers* (esp. compssUsers.server)
-
-	* share/compssUsers: remove "Utilities" here instead of removing it
-	hackily in install_steps_gtk
-
-	* share/compssUsers.server: fix the path=Utilities for the Utilities
-	section
-
-2002/03/11  yduret
-
-	* standalone/scannerdrake: re-re-re-re-re-re-uncomment the pkgs check
-	line.
-
-2002/03/10  chipaux
-
-	* share/po/fr.po: Corrected few typo mistakes.
-
-2002/03/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: gcize damienization
-
-	* share/rpmsrate: put userdrake together with drakconf so that
-	userdrake is not missing (till)
-
-2002/03/10  siegel
-
-	* share/po/help_xml2pm.pl: added tag filename
-
-	* any.pm: added missing i18n _()
-
-	* share/po/de.po: update
-	and still fixes ...
-	updates
-	update
-
-2002/03/10  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Protect the Star Office/OpenOffice.org configuration against
-	manual changing of the "update-alternatives" assignment of the "lpr"
-	command.
-
-	* detect_devices.pm: Made USB printer auto-detection more stable and
-	reliable.
-
-2002/03/10  yduret
-
-	* standalone/scannerdrake: added ASK DEVICE support
-
-	* scanner.pm: added ASK support for more interactiveness during
-	configuration
-
-2002/03/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: comply better to ClientID stuff
-
-2002/03/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated po file
-
-2002/03/09  yduret
-
-	* standalone/scannerdrake: added sum up at the end
-	uncomment line that checks if sane rpm is installed or not (thx gc).
-	i sux,
-
-2002/03/08  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakproxy: drakproxy rewritten
-	working drakproxy
-
-	* install_steps.pm: corrected network up/down when network install
-
-	* standalone/drakfont: ergonomy changed to fit in mcc
-	corrected network up/down when network install
-
-	* network/network.pm: proxy settings corrected
-
-2002/03/08  fabman
-
-	* share/po/es.po: updated spanish translation
-
-2002/03/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed allowNVIDIA_rpms to take care of new kernel naming
-	conventions.
-
-	* standalone/XFdrake: fixed NVIDIA support to use newer kernel naming
-	conventions.
-
-	* Xconfigurator.pm: fixed possible additional XFree packages not installed
-	if server is already
-	installed.
-
-2002/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: missing translations + a few changes
-
-	* mdk-stage1/probing.c: have 4 seconds of delay for usb stuff
-	to show up rather than seconds
-
-2002/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/it.po: updated po files
-
-	* share/po/es.po: corrected typo
-
-	* share/po/da.po: updated Danish file
-
-	* lang.pm, share/locales-skeleton.tar.bz2: Added symlinks in
-	locales-skeleton so non primary chinese encodings
-	can work
-
-	* share/po/ar.po: updated po file
-
-	* share/po/cy.po: removed the "translation" of licence, it was random
-	text.
-
-2002/03/07  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po, modparm.pm: corrected
-
-2002/03/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/newt-frontend.c: english fix thx to till & phil
-
-2002/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated po file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2002/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: removing quota choices for reiserfs
-
-2002/03/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: make gc happy
-
-	* modparm.pm, share/po/fr.po: corrected
-
-	* standalone/draknet: corrected network/internet restart when already
-	connected
-
-	* network/netconnect.pm: corrected bad previous behaviour
-
-	* standalone/drakfont: corrected bad system command
-
-	* share/advertising/02-internet_icon.png,
-	share/advertising/05-contcenter_icon.png,
-	share/advertising/10-MDKexpert_icon.png, share/advertising/06-user.pl,
-	share/advertising/08-games.pl, share/advertising/02-internet.pl,
-	share/advertising/03-graphic_icon.png, share/advertising/07-server.pl,
-	share/advertising/12-MDKstore_icon.png,
-	share/advertising/06-user_icon.png,
-	share/advertising/07-server_icon.png, share/advertising/09-MDKcampus.pl,
-	share/advertising/10-MDKexpert.pl, share/advertising/05-contcenter.pl,
-	share/advertising/04-develop.pl,
-	share/advertising/09-MDKcampus_icon.png,
-	share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
-	share/advertising/04-develop_icon.png,
-	share/advertising/08-games_icon.png: changed icon sizes
-
-2002/03/07  fcrozat
-
-	* share/rpmsrate: Evolution is not dependent on GNOME selection (not
-	require gnome-core)
-
-2002/03/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: avoid destroying some files in /etc.
-
-	* install_steps_interactive.pm: fixed package tree with a given medium.
-
-	* any.pm: fix autologin sometimes activated without user intervention.
-
-2002/03/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: generate_automatic_stage1_params: also save
-	the interface number in case the machine will
-	have several interfaces; clean code a bit
-
-	* mdk-stage1/network.c: better error msg regarding pcmcia net
-	adapters supported either with pcmcia.img
-	or network.img (amaury sucks)
-
-	* install_steps_auto_install.pm: in replay mode, since
-	$o->{interactiveSteps}
-	exists, we can't simply ||= @graphical_steps,
-	we need to push to ensure that the
-	@graphical_steps is always honoured
-
-	* standalone/drakgw: 
-	  - call net_monitor to disable internet
-	connection before network-restart
-	  - user return value when status'ing the
-	  initscripts rather than grepping their
-	  text output
-
-	* modules.pm: try to avoid segfaulting probeall stuff
-	add ns83820 gigabit (goes to other.img)
-
-	* rescue/rescue-doc: english fixes thx to phil
-
-2002/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* standalone/drakfont: Added a missing _( ) around a text
-
-	* share/po/vi.po, share/po/cy.po, share/po/hu.po, share/po/id.po: updated
-	po files
-
-	* share/po/ko.po, share/po/ca.po, share/po/tr.po: commented out the
-	translations using argument switching (not yet handled by DrakX)
-
-	* bootlook.pm, standalone/drakboot: i18n changes
-
-	* keyboard.pm: corrected the locale->keyboard list building
-	make keyboard selection choose first the 5 first chars of lang;
-	then the 2 first chars;
-
-	* share/po/eu.po: commented out the translations using argument switching
-	(not yet handled by DrakX)
-	updated po file
-
-2002/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix fileshare custom config
-	fix *some* stew errors
-
-	* bootloader.pm: "--timeout=" must be after terminal
-	add --timeout=... for "terminal serial ..." line in grub's menu.lst
-	fix *some* stew errors
-
-	* install_any.pm: don't have the adsl & modem passwords in report.bug
-
-	* detect_devices.pm (zips__faking_ide_scsi): fix returned value in
-	standalone
-	(getSCSI): don't call isFloppyOrHD for ZIPs (lowers the number of kernel
-	error when there is no floppy)
-
-	* fs.pm: removing quota choices for reiserfs
-
-2002/03/07  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* any.pm, bootlook.pm, standalone/drakboot, bootloader.pm: drakboot
-	functionality for PPC
-
-2002/03/07  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of network not being started by Printerdrake
-	during installation.
-
-2002/03/07  warly
-
-	* share/compssUsers.server, share/compssUsers, share/rpmsrate: update
-	server, merge with normal rpmsrate
-
-2002/03/06  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/no.po, share/po/cy.po: updated po file
-
-2002/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset (nfs_exports::update_server): ensure portmap is
-	running
-
-2002/03/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected font stuff
-
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-
-2002/03/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: no 3D with Utah GLX (XF 3.3) if more than 800 MB.
-
-	* pkgs.pm: fixed error when using multiple removable media and user
-	aborted installation
-	(for some other error) and hdlists cannot be retrieved.
-	add save of synthesis too when partitions are reformated, so that urpmi
-	is happy after.
-	fixed when hdlist gives no new package (new name) but only obsoleted
-	package or
-	updated package, ie security updates may appreciate.
-
-	* install_any.pm: update for newer pkgs module (fix for abort during
-	installation).
-
-	* rescue/tree/etc/oem: allow oem script to be executable from standard cd
-	set (powerpack or other).
-
-2002/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po: updated po file
-	updated pot file
-
-	* share/po/fr.po, share/po/cy.po, share/po/id.po, share/po/zh_TW.po:
-	updated pot file
-	updated some po files
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2002/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: add @preferred libxpm4
-
-	* lang.pm: fix typo in %xim (for chineese)
-	  - create the kde share/config's directory, so that kde config files
-	are created in any case
-	  - in user_only localedrake, ensure the /etc/sysconfig/i18n is taken
-	into account when ~/.i18n doesn't exist (thanks to F.Crozat)
-
-	* install_any.pm: ensure the fstab is kept on upgrade
-	(g_auto_install): use "interactiveSteps" field instead of pushing in
-	@install_steps_auto_install::graphical_steps
-
-	* standalone/localedrake: when called by kcontrol with --apply, don't
-	modify kde config files, kcontrol takes care of it more nicely
-
-	* diskdrake/interactive.pm: translate the actions
-	choose to activate crypto. type password. unselect encryption. Select
-	encryption again, you were not asked for password. Fixed
-	use formatError
-
-	* bootloader.pm (add_append): don't add to entries of type 'other'
-
-	* devices.pm (find_free_loop): fix
-
-	* install_steps_interactive.pm, install_steps.pm: ensure the fstab is kept
-	on upgrade
-
-	* fsedit.pm: do not allow encrypted /var
-
-2002/03/06  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: print an error message if xawtv isn't installed
-	fix conflict between i18n and complete signal handler (ie return key
-	and not value)
-
-2002/03/06  warly
-
-	* share/rpmsrate: remove abiword
-
-2002/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/probe.c: an old sucking PCI card needs oldskool
-	i82365 :-((, ugly patch
-
-2002/03/05  warly
-
-	* share/rpmsrate: add Fred Bastok modif
-	remove too many duplicate in i18n packages that are now automatically
-	added
-
-2002/03/05  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* modules.pm: Add USB2 controller
-
-2002/03/05  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected expert option in install mode
-	added expert mode
-
-	* my_gtk.pm: greater interstice
-
-	* modparm.pm: cosmetic
-	gzipped modules handled
-
-2002/03/05  fcrozat
-
-	* share/rpmsrate: Install xlockmore when installing gnome, since
-	xscreensaver can't lock
-	root desktop..
-
-2002/03/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivate v4l module if DRI is enabled and r128
-	driver used.
-
-	* install_steps.pm: added auto restore of some files (/etc/profile) needed
-	by upgrade (from .rpmnew).
-	added log for hasNetwork (so that we can understand why installUpdates
-	do nothing).
-
-	* crypto.pm: avoid trying to find hdlist-updates.cz in existing medium
-	(instead of ftp one).
-
-	* fs.pm: fixed hd install to allow using specific directory.
-
-	* install_any.pm: fix duplicate synthesis.hdlist.xxx file present in
-	/var/lib/urpmi, and
-	furthermore uncompressed :-(
-	fixed possible bug when generating synthesis file for urpmi
-	installation.
-
-2002/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c, mdk-stage1/dhcp.h, mdk-stage1/network.c: save
-	dhcp_hostname for stage2
-
-	* install_any.pm: fix bug in generating automatic stage1
-	params for http
-
-	* modules.pm: aironet core sucking thing
-
-2002/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po: updated po files
-
-2002/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: if mem=nopentium is given on cmdline, have it after
-	install
-
-	* modules.pm (extract_modules): created (was done in load_raw)
-
-2002/03/05  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator.pm: use UseFBDev for r128 - PPC
-
-2002/03/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added support for HP's newest MF devices: HP OfficeJet
-	D series, HP LaserJet 33xx MFP.
-	Fixed bug of printerdrake sometimes assuming the user has an MF device
-	when he has typed the device file name in the expert mode.
-
-2002/03/05  yduret
-
-	* bootlook.pm: fix nobody bug
-
-	* standalone/logdrake: mail alert: use eval {} to catch wizcancel
-
-2002/03/04  dam's  <damien@mandrakesoft.com>
-
-	* modparm.pm: corected weirdness, I suck
-
-2002/03/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fix scroll total to match reality.
-	fixed interpretation of size of package when doing an install (this can
-	be
-	severe, need testing).
-
-2002/03/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cy.po, share/po/id.po: updated po file
-
-2002/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (gtkicons_labels_widget): since style is not set either, use
-	the widget and ask it the style->font. This *works*
-	(gtkicons_labels_widget): pass the style instead of directly passing the
-	font
-
-2002/03/03  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Let Star Office/OpenOffice.org configuration corrcet a bug
-	in the PostScript produced by these programs so that the Euro symbol is
-	printed correctly.
-
-2002/03/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated po file
-
-2002/03/02  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: better name for windobe new 0x42 special id (their
-	own LVM marker)
-
-	* detect_devices.pm: better jaz detection (thanks to Randy Welch)
-
-2002/03/02  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/da.po, share/po/vi.po, share/po/hu.po: updated
-	po files
-
-	* share/po/tr.po: updated po file
-
-2002/03/02  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: add lvreduce & lvextend
-
-	* detect_devices.pm: fix ide zip name when there are already some other
-	SCSI drives
-	ZIPs and Jazz's are not floppies
-
-	* diskdrake/interactive.pm (Resize): ensure we call lv_resize from lvm and
-	adjust_* for normal partitions, even for destructive resizes
-
-2002/03/02  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix gc's bulshit
-
-2002/03/01  dam's  <damien@mandrakesoft.com>
-
-	* services.pm: corrected translation used for shell command
-
-	* my_gtk.pm: style & font correction
-
-2002/03/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
-	* rescue/tree/etc/oem: added ext3 support.
-
-	* share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
-	* install_any.pm: reset correct setup_postinstall_rpms calling.
-	removed some card where 3D is not installed by default:
-	Riva128, Radeon 8500 and Rage Mobility card.
-	removed staling debug code.
-	fixed bad copied package (if one is not found).
-
-	* tools/oem-prepare: added handling of newer rpmsrate format with INSTALL
-	category.
-
-	* pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
-	handling.
-	only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few missing trads
-	please translators, keep two newlines when
-	there are two newlines in original string,
-	it's on purpose
-
-2002/03/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated po files
-
-	* share/po/fr.po: fixed two typos
-	small corrections (non breakable spaces)
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
-	Xdrakres completly obsolete)
-
-	* standalone/localedrake: restrict localedrake to installed lang
-
-	* lang.pm: restrict localedrake to installed lang
-	add 'C' in %charset2kde_font (so that english has normal fonts)
-
-	* bootloader.pm: 
-	  - do not indent "disk=... bios=..."
-	  - $lilo->{first_hd_device} can be used to tell which drive is the
-	first one
-	for the BIOS. Useful when the bootloader is installed on a partition and
-	not
-	on the MBR.
-	read "disk=/dev/xxx bios=0x8x" and save it
-
-	* any.pm: restrict localedrake to installed lang
-	ask which hard drive is the booting one when there is mixed kind of
-	drives
-	(scsi+ide, ide2+ide) and the bootloader is not installed on MBR
-
-2002/03/01  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Reduced the paths to search for Star/Open Office, on systems
-	without these applications installed the search needed a significant
-	time.
-
-2002/03/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: updated INSTALL category with NOCOPY new flag added.
-
-	* share/rpmsrate.server: synced with rpmsrate INSTALL category.
-
-	* install_any.pm: removed staling debug code.
-	fixed bad copied package (if one is not found).
-
-	* pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
-	handling.
-	only copy package in INSTALL category with a rate of at least 2.
-
-2002/03/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: add hostname/domain in dhcp negociation,
-	thx to david@eastcott.net
-
-	* share/po/fr.po: please translators, keep two newlines when
-	there are two newlines in original string,
-	it's on purpose
-
-2002/03/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/zh_TW.po, share/po/hu.po: updated po files
-
-2002/03/01  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
-	Xdrakres completly obsolete)
-
-	* detect_devices.pm: add is_a_recent_computer()
-
-	* any.pm: call dcop as user
-
-	* lang.pm: add 'C' in %charset2kde_font (so that english has normal fonts)
-	switch en_GB, *_CH, da, es@tradicional and wa to iso-8859-15
-
-	* bootloader.pm: read "disk=/dev/xxx bios=0x8x" and save it
-
-	* mouse.pm: special case for non detected usb interface on a box with no
-	mouse.
-	we *must* find out if there really is no usb, otherwise the box may
-	not be accessible via the keyboard (if the keyboard is USB)
-	the only way to know this is to make a full pci probe
-
-2002/02/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: bugfixs
-	corrected translation for crontab
-
-	* modparm.pm: corrected modinfo path for isa modules during install
-
-2002/02/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: try to fix if no chosen width has been found.
-	removed Radeon 8500 from DRI capable cards.
-
-	* rescue/tree/etc/oem: added curl as a bonus for oem install (it will be
-	used by urpmi)
-	added a2ps as a bonus (it fetch tetex where oem limited disk usage do
-	not agree
-	a lot).
-	fixed bad copy of install packages.
-
-	* tools/oem-prepare: added curl as a bonus for oem install (it will be
-	used by urpmi)
-	added a2ps as a bonus (it fetch tetex where oem limited disk usage do
-	not agree
-	a lot).
-	fixed bad copy of INSTALL packages.
-
-2002/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: more precise msg when can't access kernel modules because
-	we still have many dumb people on cooker asking what's going on
-
-	* install_steps_interactive.pm: small english fix
-
-2002/02/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/de.po, share/po/no.po: updated po files
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-	* share/po/sv.po: updated Swedish file
-	updated pot file
-
-2002/02/28  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
-	"no" could be either "no-dvorak" or "no-latin1")
-
-	* keyboard.pm (loadkeys_files): ensure each file appear only once
-
-2002/02/28  siegel
-
-	* share/po/de.po: and another part of updates
-	updates
-
-2002/02/28  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: last translation but not least.
-	further updates
-	update french translation
-
-2002/02/28  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-marble3d.rc: rechanged bg for camille
-
-	* standalone/drakbackup: corrected translation for crontab
-
-2002/02/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed bad copy of install packages.
-
-	* tools/oem-prepare: fixed bad copy of INSTALL packages.
-
-	* Xconfigurator.pm: removed Radeon 8500 from DRI capable cards.
-
-2002/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/aliases, rescue/list: include /sbin/fsck.ext3 since our users are
-	so dumb
-
-2002/02/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2002/02/28  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
-	"no" could be either "no-dvorak" or "no-latin1")
-
-	* keyboard.pm (loadkeys_files): ensure each file appear only once
-
-	* bootloader.pm: add "nowarn" in lilo.conf
-
-	* install_steps.pm, fs.pm: use the "soft" option by default for /mnt/nfs
-	and for "diskdrake --nfs"
-
-2002/02/28  sdupont
-
-	* standalone/drakfont: including 'su' mode on drakfont.
-
-2002/02/28  siegel
-
-	* share/po/de.po: updated missing strings
-
-2002/02/28  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Re-activated function to specify a CUPS server in
-	another network and to switch to manual CUPS configuration.
-	  - Fixes/Improvements on Star Office/Open Office support:
-	o When one switches the spooler, the entries of the printers under the
-	     old spooler are removed from Star Office/Open Office
-	   o Printers on remote CUPS servers (which are known through
-	broadcasting)
-	     can be added to Star Office/Open Office
-
-	* share/rpmsrate.server, share/rpmsrate: Added "curl" to install section,
-	it is needed by printerdrake.
-
-	* printer.pm: 
-	  - Fixes/Improvements on Star Office/Open Office support:
-	o When one switches the spooler, the entries of the printers under the
-	     old spooler are removed from Star Office/Open Office
-	   o Printers on remote CUPS servers (which are known through
-	broadcasting)
-	     can be added to Star Office/Open Office
-
-2002/02/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: updated Basque file
-
-2002/02/27  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: 
-	  - Improved fully automatic adding of printer queue:
-	o Ask for a queue name if more than one printer is detected
-	   o Let user confirm the model automatically chosen from the database
-	   o Set correct paper size according to the language/country
-	  - When one chooses a "CUPS + GIMP-Print" driver now all important
-	options
-	  are displayed directly (without needing "Advanced" button).
-	  - Made less warning appearing on the console from where "printerdrake"
-	was
-	  called.
-
-2002/02/27  fabman
-
-	* share/po/es.po: converted to UTF-8
-
-2002/02/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: fix missing version listed when doing update.
-
-2002/02/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: a few translations
-
-	* mdk-stage1/rescue-gui.c, rescue/restore_ms_boot, rescue/list.i386,
-	rescue/make_rescue_img: add "restore Windows Boot Loader" to rescue
-
-	* install_steps_interactive.pm: formatAlaTex for congratz msg
-	xfs + bootdisk = warning_msg
-
-	* share/rpmsrate: flightgear is now fully lowercase
-	glaxium
-
-	* mdk-stage1/pcmcia_/probe.c: add Keld J�rn Simonsen <keld@dkuug.dk>'s O2
-	Micro
-	CardBus controller, and two other PCI entries which
-	have close descriptions
-
-	* mdk-stage1/pcmcia_/merge_from_pcitable: misc
-	also report when pcitable is "too old"
-	write a short perl program to easily merge new
-	cardbus controllers from pcitable into probe.c
-
-2002/02/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eu.po: updated po file
-
-2002/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: simplify pyDict
-
-	* install_steps_interactive.pm: ensure a keyboard is only once available,
-	either in advanced or normal, but
-	not in both (tx2fredl)
-
-	* share/po/da.po: 
-	  - it is UTF-8
-	  - fix line splitting
-
-	* lang.pm: workaround iso-8859-1 charset based languages not displayed
-	correctly at install
-	  - %lang2country is the authority, so if the country given by
-	%lang2country doesn't exist in KDE, return C
-	  - fix be,sp,sr
-	  - s/def/default/ (typo)
-	  - add some utf kde fonts
-
-2002/02/27  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: update french translation
-
-	* standalone/drakxtv: 
-	  - simplify an ACTION||fallback;fallback into ACTION;fallback
-	  - print a message saying that xawtv can be used now at the end of the
-	channels auto-probing in case of direct use from cl and not from
-	  XawTV wrapper (from qa test) aka let the world be better :-)
-
-	* share/po/br.po: minor update
-	update brezhoneg translation
-
-2002/02/26  dam's  <damien@mandrakesoft.com>
-
-	* modparm.pm: corrected bad sprintf
-
-2002/02/26  fabman
-
-	* share/po/es.po: updated spanish translations
-
-2002/02/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version 8.2
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/sv.po, share/po/hu.po: updated po files
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
-	diskdrake/interactive.pm: propose some mount points for
-	removable/nfs/smb
-
-	* install_steps_interactive.pm: if no sound card are detected AND the user
-	selected things needing a sound card, propose a special case for ISA
-	cards
-
-	* share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
-	when asked for a ISA
-	sound card)
-
-	* my_gtk.pm (@icon_paths): ease testing
-
-2002/02/26  siegel
-
-	* share/po/de.po: updates
-
-2002/02/26  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: corrected ttf/TTF and xfs restart
-
-	* share/logo-mandrake.png: new logo
-
-2002/02/26  fabman
-
-	* share/po/es.po: updated spanish translations
-
-2002/02/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix translation of test program.
-
-2002/02/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fclose.c: don't segfault when fclose(NULL)
-
-	* share/po/fr.po: 
-	  - explain where to put nbsp spaces, explain
-	what's nbsp spaces, explain how to compose them
-	  - add a few missing nbsp spaces
-	  - translate a few more things
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* any.pm: fixed English typo
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
-	diskdrake/interactive.pm: propose some mount points for
-	removable/nfs/smb
-
-	* Xconfigurator.pm: make perl_checker happy
-	have "Ok  More  Show all" instead of "Ok  Cancel  Show all"
-	set the locale properly instead of setting the translated messages in
-	the script
-
-	* any.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	(devfssymlinkf): use /etc/devfs/conf.d/name.conf instead of putting the
-	symlink in lib/dev-state
-
-	* share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
-	when asked for a ISA
-	sound card)
-	add xine in VIDEO 4
-
-	* install_steps.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	don't add mem=nopentium anymore. kernel people says it's not needed and
-	bad
-	for performance. It also means any bug must be addressed to them
-	create /dev/dvd for DVDs
-
-	* my_gtk.pm (@icon_paths): ease testing
-
-	* lang.pm: create bindtextdomain which does only part of the load_mo job
-
-	* install_steps_interactive.pm: if no sound card are detected AND the user
-	selected things needing a sound card, propose a special case for ISA
-	cards
-
-	* detect_devices.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-	cleanup
-
-	* fs.pm: 
-	  - zips() now return devices ending with "4", raw_zips() is the old
-	zips()
-	  - rdvd handling
-	  - add .conf for /etc/devfs/conf.d/ files
-
-2002/02/26  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: Ti Powerbook uses non-std 1152x768, rather than
-	1152x864
-
-2002/02/26  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* standalone/drakxtv: use "xvt -T" rather than "xvt --title": now not only
-	we support rxvt
-	and xterm but konsole too.
-	the only one missing is gnome-terminal which has -t but not -T
-	update comments
-	  - remove useless "no_edit => 1"
-	  - use interactive_gtk to determine if we're runned under X11 (ie
-	authorized acces to X11 server, X11 context, ...)
-	  - add a note to remember that we should add a method to detect if we
-	  run under X11 if/when we implement interactive_qt
-	  - simplify code :
-		* remove is_tv and simplify its code to be a one-liner (replace a
-		  foreach by a scalar context)
-		* use format to prevent reverse lookup on scantv run thus
-		  enabling to reverse the initial hash table
-	  - all cases (newt, gtk, wt/wo xvt, ...) have been re tested on real
-	hw.
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated po file
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated po file
-
-2002/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove passwords and realnames from report.bug
-
-2002/02/25  dam's  <damien@mandrakesoft.com>
-
-	* any.pm, modparm.pm: corrected modules parameters functions
-
-	* standalone/drakfont: debug
-
-2002/02/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixes for cursor or
-	nasty pixel displayed using syslinux-1.67-3mdk
-
-2002/02/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: don't put accents for bootloader, we can just use 7bit
-	chars
-	(titi sucks bigtime)
-	add a few nbsp spaces
-
-	* rescue/list: add mt-st DAT stuff for joeghi (ghibo)
-
-2002/02/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2002/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: ignore-table is a global flag, so put it there (when
-	needed)
-
-	* standalone/drakboot: add --testing
-
-	* modules.pm, install_steps.pm, fs.pm, detect_devices.pm: use ide-scsi for
-	ide zips
-
-	* install_steps_interactive.pm: sort the list of keyboards
-
-2002/02/25  Thierry Vignaud  <tvignaud@mandrakesoft.com
-
-	* share/po/fr.po: fix a typo (thanks gc)
-
-2002/02/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ru.po, share/po/sp.po, share/po/ca.po, share/po/th.po,
-	share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/ro.po,
-	share/po/sv.po, share/po/sr.po, share/po/da.po, share/po/el.po,
-	share/po/et.po, share/po/cs.po, share/po/tr.po, share/po/az.po,
-	share/po/eu.po: updated some po files
-
-2002/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: fix permission
-
-2002/02/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cy.po, share/po/Makefile: updated Welsh file
-
-	* share/po/zh_CN.po, share/po/DrakX.pot, share/po/eu.po, share/po/vi.po,
-	share/po/wa.po, share/po/zh_TW.po: udated Vietnamese file
-
-	* install_steps_interactive.pm: removed useless _( ) around a string
-	displayed in English only
-
-	* share/po/be.po, share/po/bg.po, share/po/sk.po, share/po/ar.po,
-	share/po/sl.po, share/po/br.po, share/po/bs.po, share/po/sv.po,
-	share/po/af.po: updated some po files
-
-2002/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_newt.pm: 
-	  - use simplify_string to ensure multi-line and too long strings are
-	not used
-	(hacky, but no other solution)
-	  - set $::setstep like interactive_gtk is doing (??)
-
-	* partition_table_empty.pm: handle MBR containing the same character (0 or
-	"l")
-
-	* diskdrake/interactive.pm: not_edit'able filesystem type (allow esp. a
-	nicer newt version)
-
-	* devices.pm (devices::make): following a good advice from Andrej
-	Borsenkow, return the
-	file even if the device file doesn't exist the caller will fail or not.
-	The
-	advantage is better compatibility than raising an exception
-	devices::make doesn't mknod with devfs
-
-	* detect_devices.pm: no need to catch the exception from devices::make
-	anymore
-	devices::make doesn't mknod with devfs
-
-	* fs.pm: nicer error message when mount fails
-
-	* share/rpmsrate: adding gphoto2
-
-	* install_steps_interactive.pm: when passwords do not match, focus on
-	first password entry, not the second (thanks to garrick)
-
-	* Xconfigurator_consts.pm: remove Option "sw_cursor" for "SiS 6326" since
-	it's already handled in Xconfigurator.pm
-
-	* my_gtk.pm: fix @icon_paths to include /usr/share/libDrakX/pixmaps
-	(thanks to garrick)
-
-	* modules.pm: remove "-f" option for insmod
-
-2002/02/23  siegel
-
-	* share/po/de.po: fixed silly error
-	updates
-
-2002/02/23  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of printers
-	in Star Office and Open Office.
-
-2002/02/22  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/02-internet.pl, share/advertising/07-server.pl,
-	share/advertising/11-consul.pl, share/advertising/09-MDKcampus.pl,
-	share/advertising/01-gnu.pl, share/advertising/13-Nvert.pl,
-	share/advertising/06-user.pl, share/advertising/10-MDKexpert.pl,
-	share/advertising/04-develop.pl, share/advertising/05-contcenter.pl,
-	share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
-	share/advertising/08-games.pl: corrected advertising text
-
-	* share/po/fr.po: corrected bad translation
-
-	* my_gtk.pm: corrected icon paths
-
-2002/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: exit the pur_gtk version after launching the wizard
-	version
-
-	* any.pm: better rephrasing
-	change name and description of security levels
-
-	* share/rpmsrate: powermanga: 2 -> 3
-
-2002/02/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/DrakX.pot: updated Danish file
-
-	* lang.pm: start of support of kde fonts
-	fixed some keyboard names
-
-	* keyboard.pm: fixed some keyboard names
-	added the two ?win_toggle choices
-	some info useful for keyboard handling
-
-	* share/keyboards.tar.bz2: fixed some keyboard names
-
-	* share/po/hu.po: updated hungarian file
-
-2002/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: even smarted process to kill selection
-
-	* lang.pm: fix 2 entries in charset2kde_font
-	  - remove non needed entries in lang2country
-	  - fix syntax errors
-	  - rename kdefont in charset2kde_font
-	  - much cleanup
-	use invalid instead of unknown for errors when checking
-	put back the less deep langs
-	have the tree less deep (esp. nicer when not displaying UTF-8 entries)
-	not translating in console installs (esp. newt) when the font is missing
-	restrict the langs displayed to non utf8 during install
-	fix warning message
-	disable perl warnings when checking
-	make perl_checker happy
-
-	* devices.pm: add atibm (thanks to Robin Pollard)
-
-	* bootloader.pm: put ignore-table to disable lilo's partition table
-	checking
-	(esp. the checking of the CHS geometry vs linear geometry)
-
-	* Xconfigurator_consts.pm: fix syntax typo
-
-	* Makefile: 
-	  - exclude urpm from perl_checker
-	  - add checking keyboard.pm
-
-	* install_steps_interactive.pm, install2.pm, install_steps.pm: not
-	translating in console installs (esp. newt) when the font is missing
-
-	* keyboard.pm: use invalid instead of unknown for errors when checking
-	change the message
-	disable perl warnings when checking
-	  - add checks for the various data structures
-	  - fix another typo for usb2drakxkbd
-	fix typo
-
-	* share/rpmsrate: add procmail in SYSTEM 4
-	add samba-doc samba-winbind samba-swat
-
-	* Xconfigurator.pm: workaround set_active failing
-
-	* any.pm: use the setupBootloader help instead of setupBootloaderGeneral
-	restrict the langs displayed to non utf8 during install
-
-2002/02/22  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: update TODO list;
-	explain what is HRC
-
-	* share/po/fr.po: further translations
-	update french translation
-
-2002/02/21  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected icon list
-
-2002/02/21  fabman
-
-	* share/po/es.po: updated spanish po file
-
-2002/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: spacecup no more exists
-	armagetron is nice, no use to install gltron as well
-	autoconf2.5 and automake1.5
-
-	* interactive.pm: when not in X and needs su, use consolehelper now
-	use consolehelper when no "kdeinit: kwin" process
-	is running
-
-2002/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm, install_any.pm: ensure lvm tools don't need to be all installed
-	at the same time
-
-	* lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
-	getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
-	* share/rpmsrate: add kinput2-wnn4
-
-2002/02/21  siegel
-
-	* share/po/de.po: update
-
-2002/02/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Removed "Manual configuration" button when "Local
-	Printer" dialog is started from the queue modification menu (Recommended
-	mode).
-	Improved matching of printer names resulting from auto-detection with
-	names in the database.
-
-2002/02/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: final batch of typos fixes (next time, please run a
-	check speller)
-	fix more typos
-	update french translation;
-	fix typos
-
-	* diskdrake/interactive.pm: shorter displayed message
-
-2002/02/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: changed button label
-
-	* standalone/icons/gmon.png, standalone/icons/categ.png,
-	standalone/icons/verti.png, standalone/icons/drakbackup.540x57.png,
-	standalone/icons/net_c.png, standalone/icons/ic82-system-40.png,
-	standalone/icons/wiz_drakgw.png, standalone/icons/ic-drakfont-48.png,
-	standalone/icons/ic82-back-up-16.png,
-	standalone/icons/wiz_scannerdrake.png,
-	standalone/icons/ic82-discdurwhat-40.png,
-	standalone/icons/ic82-tape-40.png, standalone/icons/ic82-network-40.png,
-	standalone/icons/smbnfs_default.png, standalone/icons/smbnfs_server.png,
-	standalone/icons/hori.png, standalone/icons/wiz_draknet.png,
-	standalone/icons/smbnfs_mounted.png, standalone/icons/wiz_firewall.png,
-	standalone/icons/wiz_default_up.png,
-	standalone/icons/ic82-back-up-32.png, standalone/icons/ic82-CD-40.png,
-	standalone/icons/ic82-systemeplus-40.png,
-	standalone/icons/ic82-back-up-48.png,
-	standalone/icons/ic82-dossier-32.png, standalone/icons/net_d.png,
-	standalone/icons/ic82-moreoption-40.png,
-	standalone/icons/smbnfs_has_mntpoint.png, standalone/icons/tradi.png,
-	standalone/icons/wiz_printerdrake.png,
-	standalone/icons/wiz_default_left.png,
-	standalone/icons/eth_card_mini2.png, standalone/icons/net_u.png,
-	standalone/icons/ic82-users-40.png, standalone/icons/mdk_logo.png,
-	standalone/icons/ic82-others-40.png, standalone/icons/ic82-when-40.png,
-	standalone/icons/draknet_step.png, standalone/icons/drakfont.620x57.png,
-	standalone/icons/ic82-where-40.png: added new gfx only standalone
-
-	* pixmaps/categ.png, pixmaps/verti.png, pixmaps/ic82-moreoption-40.png,
-	pixmaps/ic82-system-40.png, pixmaps/net_c.png,
-	pixmaps/ic-drakfont-48.png, pixmaps/ic82-CD-40.png,
-	pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
-	pixmaps/draknet_step.png, pixmaps/ic82-dossier-32.png,
-	pixmaps/ic82-back-up-48.png, pixmaps/smbnfs_server.png,
-	pixmaps/ic82-discdurwhat-40.png, pixmaps/smbnfs_default.png,
-	pixmaps/gmon.png, pixmaps/drakbackup.540x57.png,
-	pixmaps/smbnfs_mounted.png, pixmaps/wiz_printerdrake.png,
-	pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
-	pixmaps/drakfont.620x57.png, pixmaps/ic82-tape-40.png,
-	pixmaps/wiz_draknet.png, pixmaps/net_d.png,
-	pixmaps/ic82-systemeplus-40.png, pixmaps/wiz_drakgw.png,
-	pixmaps/mdk_logo.png, pixmaps/ic82-users-40.png,
-	pixmaps/ic82-back-up-16.png, pixmaps/hori.png, pixmaps/tradi.png,
-	pixmaps/smbnfs_has_mntpoint.png, pixmaps/eth_card_mini2.png,
-	pixmaps/wiz_firewall.png, pixmaps/net_u.png, pixmaps/ic82-where-40.png,
-	pixmaps/ic82-others-40.png, pixmaps/ic82-network-40.png,
-	pixmaps/wiz_scannerdrake.png: removed gfx not used during install
-
-2002/02/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: fixed another not seen 8.1 reference in label.
-	fixed 8.1 release hard coded.
-
-2002/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fi.po: updated pot file
-	updated Finnish file
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/themes/blueHeart-button4.png, share/themes-DarkMarble.rc,
-	install_gtk.pm, share/themes/DarkMarble-button3_out.png,
-	share/themes.rc, share/themes/blueHeart-brown_bg1.png,
-	share/themes/DarkMarble-button3_in.png, share/themes-blueHeart.rc,
-	share/themes/DarkMarble-check_on.png,
-	share/themes/blueHeart-button1.png,
-	share/themes/DarkMarble-check_off.png,
-	share/themes/blueHeart-button2.png, share/themes/DarkMarble-gloom2.png,
-	share/themes/DarkMarble-button3_in_prelight.png,
-	share/themes/DarkMarble-button3_out_prelight.png: remove DarkMarble and
-	blueHeart themes
-
-	* bootloader.pm: have devfs=nomount for failsafe
-
-	* Makefile.config, share/po/Makefile: make a difference between PMS and
-	ALLPMS. For install, only use PMS
-
-	* lvm.pm: ensure lvm tools don't need to be all installed at the same time
-
-	* Makefile: template.in stuff removed
-	make a difference between PMS and ALLPMS. For install, only use PMS
-
-	* pkgs.pm: smarter choosing of processes to kill
-
-	* tools/i386/netboot/make_boot_network: cleanup
-
-	* modules.pm: add aic7xxx_old
-
-	* install_any.pm: ensure lvm tools don't need to be all installed at the
-	same time
-	(remove_bigseldom_used): remove xf86Wacom.so & mkfs.xfs
-	DarkMarble theme is removed
-	(kdeicons_postinstall): remove this obsolete code
-	no special case for installing imwheel
-
-	* lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
-	getFile'd (cuz they are big, causing the .cz2 to be *big*)
-
-	* network/smbnfs.pm, network/nfs.pm: nicer conditional displaying of nfs
-	comment
-
-2002/02/21  siegel
-
-	* share/po/de.po: update
-	snapshot
-
-2002/02/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added "type => 'list'" to the printer modification
-	menu, it appeared as a drop-down list during the installation.
-
-2002/02/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv: more translatable strings;
-	hide scantv output on console;
-	check that we're under X11 before running scantv in an xterm
-
-2002/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/doc/UPDATEMODULES: add an example on modules with options
-	first line comment no more necessary
-	s/row/column/, silly me
-
-	* standalone.pm: explanations stuff: no reason to use "updated" at a place
-	when we
-	use "modified" at the rest of the locations..
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-	updated Spanish file
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (ejectCdrom): display "files still open:" for all
-	processes when umounting fail
-
-	* pkgs.pm: much simpler & stronger killing of still running processes
-
-	* mouse.pm: USB|Generic is 3 button mice, add a USB 2 Button entry
-
-2002/02/20  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-marble3d.rc: updated theme
-
-	* network/adsl.pm: mgmt install corrected
-
-2002/02/20  daouda
-
-	* share/rpmsrate: 
-	  - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20  fcrozat
-
-	* share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, tools/oem-prepare: synced with newer rpmsrate of
-	DrakX and newer method to select INSTALL packages.
-
-	* standalone/XFdrake: fixed NVIDIA package in urpmi db by directly using
-	urpm library instead of
-	parsing (now removed) depslist.ordered file.
-
-	* Xconfigurator.pm: fixed default value if selecting a card (use previous
-	one or existing one).
-	added XFree 4 driver choice if Other|Unlisted is chosen.
-	fixed cancel on card selection so that previous choice is not lost.
-
-	* Xconfigurator_consts.pm: added @allbutfbdrivers and @alldrivers for
-	listing XFree 4 drivers.
-
-2002/02/20  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add gcc3.0-c++ and libstdc++3.0-devel
-	  - Prefer gcc3.0-java over gcc-java
-	  - Remove BasiliskII-sheepnet since it does no longer exist
-	  - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated FRench file
-
-	* share/po/es.po: updated Spanish file
-	updated Spanish file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix s/SILO/LILO/
-
-	* fsedit.pm: have "with /usr" translated
-
-	* install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
-	button
-
-	* steps.pm: move installUpdates after configureX (workaround for bad
-	timeouts during installing updates)
-
-	* install_steps.pm, any.pm, standalone/draksec: factorize and update the
-	reading of previous security level
-
-2002/02/20  siegel
-
-	* share/po/de.po: update
-
-2002/02/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update french translations
-
-2002/02/20  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/13-Nvert.pl: changed toll free
-
-	* my_gtk.pm: added mcc kill if wait message
-
-	* standalone/logdrake: cosmetic change, mcc compliance
-
-2002/02/20  daouda
-
-	* share/rpmsrate: 
-	  - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/20  fcrozat
-
-	* share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla
-
-2002/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: fixed INSTALL category in rpmsrate for copying
-	file when changing cd (was an
-	limitation in read_rpmsrate when a package having a category and INSTALL
-	caused
-	INSTALL to be dropped).
-
-2002/02/20  gbeauchesne
-
-	* share/rpmsrate: 
-	  - Add gcc3.0-c++ and libstdc++3.0-devel
-	  - Prefer gcc3.0-java over gcc-java
-	  - Remove BasiliskII-sheepnet since it does no longer exist
-	  - Add/prefer BasiliskII-jit over BasiliskII
-
-2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/advertising/07-server.pl, share/advertising/01-gnu.pl: Improved
-	English strings
-
-	* share/po/hu.po, share/po/es.po, share/po/ar.po: updated Hungarian and
-	Spanish files
-
-2002/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove fsck_option (obsolete)
-
-	* share/po/fr.po: fix s/SILO/LILO/
-
-	* fsedit.pm: have "with /usr" translated
-
-	* install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
-	button
-
-	* steps.pm: move installUpdates after configureX (workaround for bad
-	timeouts during installing updates)
-
-	* install_steps.pm, any.pm, standalone/draksec: factorize and update the
-	reading of previous security level
-
-2002/02/20  siegel
-
-	* share/po/de.po: snapshot
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19  fcrozat
-
-	* share/rpmsrate: 
-	  -Install gnome-vfs-extras when installing nautilus (to get samba
-	browsing)
-	  -don't install nautilus-mozilla, it is pulled by nautilus
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: english fix
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-	* diskdrake/smbnfs_gtk.pm: ugly hack to fix die
-
-2002/02/19  siegel
-
-	* share/po/de.po: updates for beta 3
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
-	$prefix in front of /var/* when missing
-	since we give "lilo.conf" in drakbug_report, let's also
-	give "menu.lst"
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-2002/02/19  siegel
-
-	* share/po/de.po: updates for beta 3
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-
-2002/02/19  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: setting help
-
-	* share/advertising/10-MDKexpert.png, share/advertising/07-server.png,
-	share/advertising/05-contcenter.png, share/advertising/03-graphic.png,
-	share/advertising/12-MDKstore_icon.png,
-	share/advertising/06-user_icon.png,
-	share/advertising/04-develop_icon.png,
-	share/advertising/12-MDKstore.png, share/advertising/00-thanks.png,
-	share/advertising/06-user.png, share/advertising/02-internet_icon.png,
-	share/advertising/04-develop.png,
-	share/advertising/05-contcenter_icon.png,
-	share/advertising/10-MDKexpert_icon.png, share/advertising/13-Nvert.png,
-	share/advertising/11-consul.png, share/advertising/03-graphic_icon.png,
-	share/advertising/02-internet.png, share/advertising/07-server_icon.png,
-	share/advertising/01-gnu.png, share/advertising/08-games.png,
-	share/advertising/09-MDKcampus.png,
-	share/advertising/09-MDKcampus_icon.png,
-	share/advertising/08-games_icon.png: re-adding with -kb
-	removing for re-adding with -kb
-	added advertising for translation
-
-	* share/advertising/essi.p: blah
-	added advertising for translation
-
-	* my_gtk.pm: new icon handler
-
-	* Makefile.config: addde share/advertising/*.pl for translation
-
-	* share/advertising/Makefile: new Makefile to install ads
-
-	* share/advertising/00-thanks.pl, share/advertising/06-user.pl,
-	share/advertising/08-games.pl, share/advertising/list,
-	share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl,
-	share/advertising/11-consul.pl, share/advertising/13-Nvert.pl,
-	share/advertising/02-internet.pl, share/advertising/07-server.pl,
-	share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl,
-	share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl,
-	share/advertising/03-graphic.pl: added advertising for translation
-
-2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
-	$prefix in front of /var/* when missing
-	since we give "lilo.conf" in drakbug_report, let's also
-	give "menu.lst"
-
-2002/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/hu.po: updated Vietnamese and Hungarian files
-
-2002/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/advertising/Makefile: advertising installation cleanup
-
-	* install2.pm: anchor the -IP match at the end of the string
-	move loading /tmp/network from stage1 before doing the auto_install
-	stuff to
-	allow the -IP feature on auto_install file name
-
-	* share/rpmsrate: add grub in 4 SYSTEM
-
-2002/02/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* standalone/printerdrake, printer.pm: Assured that the default page size
-	is "Letter" for US/Canada and "A4" for the rest of the world.
-	The "Description" field of a printer queue is filled in with printer
-	manufacturer and model by default.
-	Removed unused varaiables in /usr/sbin/printerdrake.
-
-	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
-	dialog.
-	Assured that the default page size is "Letter" for US/Canada and "A4"
-	for the rest of the world.
-	The "Description" field of a printer queue is filled in with printer
-	manufacturer and model by default.
-	Removed unused varaiables in /usr/sbin/printerdrake.
-
-	* install_steps_interactive.pm: Replaced "a4" and "letter" by "A4" and
-	"Letter" so that Foomatic recognizes
-	the paper sizes.
-	Also use "Letter" paper for "en_CA" and "fr_CA" locales.
-
-2002/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: when no net device found, print a msg to tell
-	that now most pcmcia network adapters are supported
-	with network.img
-
-2002/02/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/DrakX.pot, share/po/th.po,
-	share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po,
-	share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po,
-	share/po/vi.po, share/po/uk.po, share/po/wa.po, share/po/sv.po,
-	share/po/zh_TW.po, share/po/it.po: updated pot file
-
-2002/02/18  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm, standalone/localedrake: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-
-	* install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
-2002/02/18  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new gfx
-
-2002/02/18  fcrozat
-
-	* share/rpmsrate: Install Guppi when installing gnumeric
-
-2002/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: titi sucks again
-
-2002/02/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po: updated Slovak ile
-	updated pot file
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	updated pot file
-
-2002/02/18  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: 
-	  - remove media_type cdrom-burner, use {capacity} instead
-	  - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - add Cancel
-	  - move "click here" in "Search servers" on the right side
-	  - remove Export
-	  - fix bug
-
-	* share/rpmsrate: raise xsane in SCANNER (Yves Duret)
-	raise mkisofs & cdrecord in BURNER
-
-	* Xconfigurator.pm: workaround not having the right to connect to our new
-	created test server.
-	info about the pb (sorry for the french):
-	quand on lance le serveur
-	  - via xdm/kdm/startx, ca utilise xauth, xhost est ferm�
-	  - via X/xinit, xhost est ouvert sur localhost, xauth n'est pas utilis�
-	  *sauf* si X/xinit est lanc� � partir d'un X *et* .Xauthority est non
-	vide.
-	    dans ce cas, xhost est ferm�, et aucun xauth n'est ajout�
-	    une cons�quence, c'est que XFdrake ne peut pas acc�der au X de
-	    test si XFdrake est lanc� sous X ou "xauth list" est non vide
-	      exception: quand on lance le xdm/kdm en root, xhost n'est pas
-	ferm�,
-	         pas contre il est ferm� en root & startx.
-
-	* any.pm (fileshare_config): rework the custom message and launch
-	userdrake
-	(report_bug): add lilo.conf
-
-	* standalone/localedrake: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-	change the message & ask wether to logout or not
-
-	* lang.pm: 
-	  - handle --kde_lang with optionally --kde_country
-	  - handle --apply
-	(lang2kde_lang): add missing valid_kde_langs
-	fuzzy language finding between available langs when it doesn't match
-	(useful for upgrades where fr_FR was fr_FR@euro)
-
-	* diskdrake/interactive.pm: remove cdrom-burner from media_type set
-
-	* install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"
-
-	* fs.pm (mount_options_unpack): add usrquota and grpquota for
-	ext2/ext3/reiserfs/xfs
-	  - remove media_type cdrom-burner, use {capacity} instead
-	  - use /proc/sys/dev/cdrom/info to fill in the {capacity}
-
-	* share/compssUsers: add EDITORS in Development/Development
-	add EDITORS in Development/Development
-
-2002/02/18  yduret
-
-	* bootlook.pm: remove aurora part (commented for the moment)
-
-	* standalone/scannerdrake: HP OfficeJet support
-	scsi/parport preliminary support
-
-	* scanner.pm: update
-	scsi parport preliminary support
-	no more show unsupported scanner
-	common output for ScannerDB update from sane *.desc files and from
-	usbtable
-
-2002/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/interactive.pm: warn_if_renumbered now also done at install
-
-2002/02/17  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: have icewm-light in any case (to be used as a failsafe
-	window manager)
-	add hotplug, usbutils and usbview with the new flag USB
-
-	* install_any.pm: hotplug now handled via rpmsrate and the USB flag
-	add some log to know why umounting /tmp/image fail
-
-	* diskdrake/interactive.pm: warn_if_renumbered now also done at install
-	force scalar context for warp_text
-
-	* share/po/id.xsl, share/po/help_xml2pm.pl: use xsltproc as a filter to
-	remove entities
-
-	* share/po/Makefile (clean): remove .memdump
-
-	* any.pm (autologin): do not allow empty user name since no autologin can
-	already be achieved by choosing "No"
-
-	* install2.pm: do not use run_program::xxx, use directly "system" so that
-	stdout is kept unchanged during "postInstall" execution
-
-	* network/smb.pm: fix typo (s/nfs/smbfs/)
-
-2002/02/17  siegel
-
-	* help.pm: new version for 8.2
-
-	* share/po/de.po: new german version
-
-	* share/po/help_xml2pm.pl: added check for missing xsltproc
-	fix perl warnings after adding -w
-
-	* share/po/.cvsignore: added .memdump
-
-	* share/po/Makefile: allow me to work with a symlink to doc in this
-	directory
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm: 
-	  - LVs "device" field were containing "/dev/vg/number" whereas it must
-	be "vg/name"
-	  - added lv_resize
-
-	* diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
-	* crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfig.pm: 
-	  - prefer XKB available from existing XF86Config over
-	/etc/sysconfig/keyboard KEYTABLE
-	  - fix translating from /etc/sysconfig/keyboard KEYTABLE to XKB
-
-	* diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM
-
-	* interactive_newt.pm: do not trash error messages if testing
-
-	* lang.pm (country2lang): created
-	(write): ensure it doesn't fail when kdeglobals is not writable (eg: the
-	directory doesn't exist)
-	(list): return the languages in a "specific" order (favours non utf8
-	over utf8)
-
-	* crypto.pm (mirrors): add a timeout via "alarm" (needs testing)
-
-	* install_steps_interactive.pm (setupSCSI): when "clicked", ask "Do you
-	have any SCSI interfaces" instead
-	of assuming there is a SCSI interface and asking the driver name
-
-	* lvm.pm: 
-	  - LVs "device" field were containing "/dev/vg/number" whereas it must
-	be "vg/name"
-	  - added lv_resize
-	  - call pvcreate with "-y -ff"
-	  - created LVs are notFormatted
-
-	* interactive.pm: 
-	  - fix non X + testing + su
-	  - since "interactive" takes care of "format" for type "combo", remove
-	"format" (so that interactive_newt which switch to type "list" don't
-	apply
-	"format" once again)
-
-	* standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (country2lang): created
-	(write): ensure it doesn't fail when kdeglobals is not writable (eg: the
-	directory doesn't exist)
-	(list): return the languages in a "specific" order (favours non utf8
-	over utf8)
-	fix call to update_gnomekderc
-
-	* standalone/localedrake: handle --kde_country=<country>
-
-2002/02/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/sk.po, share/po/cs.po, share/po/es.po: updated Czech, Spanish
-	and Slovak files
-
-2002/02/16  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm: fix call to update_gnomekderc
-	remove unused & unneeded special %lang2kde_lang
-	  - add lang::check
-	  - fix utf-ko -> utf_ko
-	  - fix utf-14 -> utf_14
-	  - modify share/config/kdeglobals
-	  - add charset2kde_charset, lang2country, lang2kde_lang
-
-2002/02/15  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: embedded mode correction
-
-	* my_gtk.pm: highlight in gtk icon widget
-
-	* share/themes/mdk-check_on.png, share/themes/mdk-toggle_off.png,
-	share/themes/mdk-toggle_on.png, share/themes/mdk-check_off.png: new gfx
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
-	share/step-orange-on.xpm, share/step-green-on.xpm,
-	share/step-red-click.xpm: new gfx
-	new gfx
-
-2002/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/fi.po, share/po/DrakX.pot, share/po/fr.po,
-	share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/hu.po,
-	share/po/eu.po: updated Basque file; fixed a msgid change
-
-	* share/po/sv.po: updated Swedish file
-	updated Basque file; fixed a msgid change
-
-2002/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm: remove assigning STDIN to /dev/null since:
-	  - programs should not use STDIN
-	  - the "postInstall" script for auto_install's is more happy still
-	having the STDIN.
-
-	* diskdrake/smbnfs_gtk.pm, pixmaps/smbnfs_has_mntpoint.png,
-	pixmaps/smbnfs_default.png, pixmaps/smbnfs_mounted.png,
-	pixmaps/smbnfs_server.png: add icons showing if a mount-point is
-	associated or if the share is mounted
-
-	* pkgs.pm: fix typo
-
-	* diskdrake/interactive.pm: use the new warp_text
-
-	* install_steps.pm: use lang::charset2kde_charset
-
-	* standalone/localedrake: lang::write doesn't need the filename anymore
-
-	* any.pm: use 'combo' instead of 'type' for bootloader choice and security
-	choice
-	(requested by fredb&dadou)
-
-	* interactive_gtk.pm: force scalar for Gtk::Label->new with warp_text
-
-	* interactive.pm: favour "combo" over "list" in any case
-
-	* Makefile (check): add lang::check checking
-
-2002/02/15  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update translation
-
-2002/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
-	* network/smb.pm, network/smbnfs.pm, network/nfs.pm: cleaner & OOed code,
-	with more code sharing
-
-	* interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
-	feature
-
-	* my_gtk.pm (ctree_set_icon): new function
-
-	* diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
-	mount-point is associated are coming
-
-	* standalone/diskdrake: fix expert and testing options handling
-
-2002/02/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: embedded mode
-	drakfont embedde mode
-
-	* share/step-red-on.xpm, share/step-red.xpm, share/step-orange.xpm,
-	share/step-orange-on.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-red-click.xpm,
-	share/step-green-on.xpm: new gfx
-
-2002/02/14  erwan
-
-	* tools/i386/netboot/ni5010/pxegrub, tools/i386/netboot/epic100/stage1,
-	tools/i386/netboot/epic100/stage2, tools/i386/netboot/3c90x/pxegrub,
-	tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/ni5210/nbgrub,
-	tools/i386/netboot/otulip/stage1, tools/i386/netboot/otulip/stage2,
-	tools/i386/netboot/exos205/nbgrub, tools/i386/netboot/eepro/stage1,
-	tools/i386/netboot/eepro/stage2, tools/i386/netboot/3c529/nbgrub,
-	tools/i386/netboot/smc9000/pxegrub, tools/i386/netboot/ne2100/stage1,
-	tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/pxegrub,
-	tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/ne/stage1,
-	tools/i386/netboot/ne/stage2, tools/i386/netboot/tulip/nbgrub,
-	tools/i386/netboot/sk_g16/nbgrub, tools/i386/netboot/eepro100/pxegrub,
-	tools/i386/netboot/tiara/nbgrub, tools/i386/netboot/rtl8139/stage1,
-	tools/i386/netboot/rtl8139/stage2, tools/i386/netboot/tiara/pxegrub,
-	tools/i386/netboot/lance/nbgrub, tools/i386/netboot/depca/nbgrub,
-	tools/i386/netboot/ni6510/stage1, tools/i386/netboot/3c90x/nbgrub,
-	tools/i386/netboot/ni6510/stage2, tools/i386/netboot/smc9000/stage1,
-	tools/i386/netboot/smc9000/stage2, tools/i386/netboot/3c509/pxegrub,
-	tools/i386/netboot/3c509/stage1, tools/i386/netboot/3c509/stage2,
-	tools/i386/netboot/sis900/pxegrub, tools/i386/netboot/ne2100/pxegrub,
-	tools/i386/netboot/3c595/nbgrub, tools/i386/netboot/eepro/pxegrub,
-	tools/i386/netboot/wd/nbgrub, tools/i386/netboot/ns8390/nbgrub,
-	tools/i386/netboot/ni5210/stage1, tools/i386/netboot/ni5010/nbgrub,
-	tools/i386/netboot/ni5210/stage2, tools/i386/netboot/exos205/stage1,
-	tools/i386/netboot/exos205/stage2, tools/i386/netboot/eepro100/nbgrub,
-	tools/i386/netboot/3c529/stage1, tools/i386/netboot/3c529/stage2,
-	tools/i386/netboot/sis900/stage1, tools/i386/netboot/tulip/stage1,
-	tools/i386/netboot/sis900/stage2, tools/i386/netboot/tulip/stage2,
-	tools/i386/netboot/sk_g16/stage1, tools/i386/netboot/w89c840/nbgrub,
-	tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/tiara/stage1,
-	tools/i386/netboot/tiara/stage2, tools/i386/netboot/depca/stage1,
-	tools/i386/netboot/lance/stage1, tools/i386/netboot/3c90x/stage1,
-	tools/i386/netboot/depca/stage2, tools/i386/netboot/lance/stage2,
-	tools/i386/netboot/3c90x/stage2, tools/i386/netboot/otulip/pxegrub,
-	tools/i386/netboot/tulip/pxegrub, tools/i386/netboot/epic100/nbgrub,
-	tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/pxegrub,
-	tools/i386/netboot/3c595/stage2, tools/i386/netboot/w89c840/pxegrub,
-	tools/i386/netboot/wd/stage1, tools/i386/netboot/wd/pxegrub,
-	tools/i386/netboot/wd/stage2, tools/i386/netboot/otulip/nbgrub,
-	tools/i386/netboot/ns8390/stage1, tools/i386/netboot/eepro/nbgrub,
-	tools/i386/netboot/ni5010/stage1, tools/i386/netboot/ns8390/stage2,
-	tools/i386/netboot/ni5010/stage2, tools/i386/netboot/ne2100/nbgrub,
-	tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/eepro100/stage1,
-	tools/i386/netboot/eepro100/stage2, tools/i386/netboot/ne/nbgrub,
-	tools/i386/netboot/depca/pxegrub, tools/i386/netboot/ne/pxegrub,
-	tools/i386/netboot/w89c840/stage1, tools/i386/netboot/rtl8139/nbgrub,
-	tools/i386/netboot/w89c840/stage2, tools/i386/netboot/sk_g16/pxegrub,
-	tools/i386/netboot/lance/pxegrub, tools/i386/netboot/ni6510/nbgrub,
-	tools/i386/netboot/smc9000/nbgrub, tools/i386/netboot/3c529/pxegrub,
-	tools/i386/netboot/3c595/pxegrub, tools/i386/netboot/ns8390/pxegrub,
-	tools/i386/netboot/epic100/pxegrub, tools/i386/netboot/3c509/nbgrub: New
-	version of grub (0.91) with allstage and pxegrub
-
-	* tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/3c507/stage1,
-	tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c503/nbgrub,
-	tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c507/nbgrub,
-	tools/i386/netboot/3c503/stage1, tools/i386/netboot/3c503/stage2:
-	Fixning some file missing in netboot
-
-2002/02/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed obsoletes management according to urpmi code.
-
-2002/02/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ga.po, share/po/cy.po, share/po/is.po, share/po/ar.po,
-	share/po/sl.po, share/po/ro.po: Instead of temporary removingfiles from
-	CVS put a rule in Makefile to
-	don't use them (thanks Thierry)
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/pt_BR.po: updted Brazilian file
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po,
-	share/po/ru.po, share/po/hr.po, share/po/ko.po, share/po/nl.po,
-	share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated some po files; removed the ones
-	too lowly translated for the 8.2
-
-	* share/po/vi.po: updated Vietnamese file
-	updated some po files; removed the ones too lowly translated for the 8.2
-
-	* share/po/Makefile: Instead of temporary removingfiles from CVS put a
-	rule in Makefile to
-	don't use them (thanks Thierry)
-
-2002/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: adapt to the neater network::smb and network::nfs
-
-	* network/smbnfs.pm, network/smb.pm, network/nfs.pm: cleaner & OOed code,
-	with more code sharing
-
-	* interactive.pm: if testing, don't use kdesu
-
-	* install_steps.pm: gzip report.bug
-
-	* interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
-	feature
-
-	* standalone/diskdrake: fix expert and testing options handling
-
-	* my_gtk.pm (ctree_set_icon): new function
-
-	* c/stuff.xs.pm: undef'ing some macros used by 2 independent sources et
-	still needed :-(
-	#include iconv.h is needed even when C_RPM is undefined
-
-	* diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
-	mount-point is associated are coming
-
-2002/02/14  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/br.po: update
-	convert to utf-8
-
-	* standalone/drakxtv: uses xawtv internal strings instead of frequencies
-	tables ids as values
-	in %freqtables in order to enhance drakxtv robustness when
-	translators'll
-	arrive. thus we'll pass right strings to scantv instead of translated
-	ones
-	explain how we manage the "all frequencies" case
-	display sorted tv norms
-
-2002/02/13  erwan
-
-	* tools/i386/netboot/device.map, tools/i386/netboot/makeImages: Adding
-	missing file on netboot
-
-	* tools/i386/netboot/make_boot_network, tools/i386/netboot/grub: updating
-	grub in netboot
-
-2002/02/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: avoid generating headers for copying file in
-	postinstall-rpm directory.
-	make sure not to crash if a package that should have been in CD1 is
-	somewhere
-	else.
-	fixed stupid typo.
-	removed all @needToCopy... variables and now use INSTALL category in
-	rpmsrate.
-
-	* share/rpmsrate: updated INSTALL category with the merge of DrakX
-	obsoleted list (it will use
-	INSTALL now :-)
-
-	* pkgs.pm: added extension to setSelectedFromCompssList.
-
-	* share/rpmsrate.server: synced INSTALL category with standard rpmsrate.
-
-2002/02/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Danish and Hungarian files
-
-	* share/po/da.po: updated Danish file
-	updated Danish and Hungarian files
-
-2002/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* network/nfs.pm: $server->{ip} is no more mandatory
-
-	* network/smb.pm: don't show shares ending with "$"
-	$server->{ip} is no more mandatory
-
-	* any.pm (setupBootloader): switch from "list" to "combo"
-
-	* fs.pm (fstab_to_string): unsetting mount points in standalone will now
-	work
-	  - handle WORM type in /proc/scsi/scsi
-	  - added media_type cdrom-burner
-	  - adapting to new media_type
-	  - nicer fd&hd testing
-
-	* diskdrake/smbnfs_gtk.pm: have the fstab entries shown by default
-
-	* detect_devices.pm, diskdrake/interactive.pm: 
-	  - handle WORM type in /proc/scsi/scsi
-	  - added media_type cdrom-burner
-	  - adapting to new media_type
-	  - nicer fd&hd testing
-
-2002/02/13  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: When one visited the help page of a remote CUPS printer
-	afterwards the full
-	printer modification menu was shown, not only the one for remote CUPS
-	printers. This is fixed now.
-
-2002/02/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/DrakX.pot: updated Czech and Walloon files
-
-	* share/po/cs.po: updated Czech file
-	updated Czech and Walloon files
-
-2002/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
-2002/02/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm: In the USB auto-detection checked whether and where
-	the device node was
-	created.
-
-2002/02/12  dam's  <damien@mandrakesoft.com>
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/themes/mdk-check_on.png, share/step-green-click.xpm,
-	share/step-green.xpm, share/step-red-click.xpm,
-	share/themes/mdk-check_off.png: new gfx
-
-	* standalone/drakbackup, network/network.pm: bug correction
-
-2002/02/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/
-
-	* docs/README.pxe: cleanup the .cfg
-
-	* share/rpmsrate: 
-	  - move bootsplash from SYSTEM to X
-	  - lower Aurora
-
-2002/02/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed:
-	  - Endless loop when entering printerdrake during installation in
-	recommended
-	mode without local printer
-	  - Printerdrake was not closed when one was in the "Add Printer"
-	sequence
-	  during installation and one clicked another installation item (entries
-	  on left hand side)
-	  - When configuring printing only after installation Printerdrake tried
-	to
-	  check the installed queues without Foomatic being installed (bug was
-	  already in 8.1, but noone discovered it).
-	  - CUPS died when one tried to add a (local) printer in recommended
-	mode
-	  after installation.
-	  - Improved text for the dialog telling that no local printer was
-	detected.
-	  - The list of auto-detected printers appeared as drop-down menu and
-	not as
-	  a list.
-
-	* detect_devices.pm: In the USB auto-detection checked whether and where
-	the device node was
-	created.
-	Fixes on device auto-detection:
-	  - Made USB printer auto-detection routine in "detect_devices.pm"
-	creating
-	the appropriate device nodes (needed for USB printers being recognized
-	  during installation).
-	  - Fixed "devices.pm" to be able to handle device files with numbers
-	geater
-	  than 9 (ex: /dev/usb/lp10).
-
-	* standalone/printerdrake: 
-	  - Assure that Foomatic is installed before checking existing printer
-	queues.
-
-	* devices.pm: Fixes on device auto-detection:
-	  - Made USB printer auto-detection routine in "detect_devices.pm"
-	creating
-	the appropriate device nodes (needed for USB printers being recognized
-	  during installation).
-	  - Fixed "devices.pm" to be able to handle device files with numbers
-	geater
-	  than 9 (ex: /dev/usb/lp10).
-
-	* printer.pm: Added forgotten '$prefix'es.
-	Fixed:
-	  - Endless loop when entering printerdrake during installation in
-	recommended
-	mode without local printer
-	  - Printerdrake was not closed when one was in the "Add Printer"
-	sequence
-	  during installation and one clicked another installation item (entries
-	  on left hand side)
-	  - When configuring printing only after installation Printerdrake tried
-	to
-	  check the installed queues without Foomatic being installed (bug was
-	  already in 8.1, but noone discovered it).
-	  - CUPS died when one tried to add a (local) printer in recommended
-	mode
-	  after installation.
-	  - Improved text for the dialog telling that no local printer was
-	detected.
-	  - The list of auto-detected printers appeared as drop-down menu and
-	not as
-	  a list.
-
-2002/02/11  dam's  <damien@mandrakesoft.com>
-
-	* share/list: added modinfo
-
-	* network/netconnect.pm: added cancel for first step
-
-2002/02/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: fixed syntax error...
-
-	* Xconfigurator.pm: avoid testing fbdev driver.
-
-	* install_steps.pm: added Aurora or bootsplash for getting a need on frame
-	buffer.
-	added fbdev for GeForce Integrated.
-
-2002/02/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/vi.po, share/po/hu.po: updated Danish,
-	Hungarian and Vietnamese files
-
-2002/02/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: booh, fpons was faster than me on "bootsplash wanting
-	fb". Keeping my solution ;p
-
-	* c/stuff.xs.pm: "standard_charset" and "iconv" are needed even when C_RPM
-	is undefined
-
-	* any.pm: allow to edit the initrd field (thx to randy.k.wilson)
-
-	* install_any.pm (@needToCopy): add "ntp"
-
-2002/02/11  warly
-
-	* share/rpmsrate: remove dev from INSTALL, the sun is rising, and there
-	are no more needs to have ppp in the INSTALL section, as the darkness is
-	going away...
-
-2002/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: in case there is both ata66 (hde) and ata33 hard drives, go to
-	expert
-	questions directly (it would need a semi_auto asking on which drive the
-	bios
-	boots...)
-
-2002/02/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2002/02/09  daouda
-
-	* share/rpmsrate: 
-	  - add rfbdrake to NETWORKING_REMOTE_ACCESS and
-	NETWORKING_REMOTE_ACCESS_SERVER
-
-2002/02/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help.pm file
-
-	* share/po/fi.po, share/po/DrakX.pot, share/po/help_xml2pm.pl,
-	share/po/es.po, share/po/fr.po, share/po/sv.po, share/po/da.po,
-	share/po/de.po, share/po/hu.po, share/po/it.po, share/po/eu.po: merged
-	with the manual help
-
-2002/02/09  warly
-
-	* share/rpmsrate: add ppp in INSTALL
-	add dev in INSTALL
-
-2002/02/08  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_drakgw.png, pixmaps/wiz_default_up.png,
-	pixmaps/wiz_firewall.png, pixmaps/wiz_draknet.png: new gfx
-
-	* network/network.pm: corrected wireless modules
-
-2002/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales-skeleton.tar.bz2: Added choice of charset for
-	various languages
-
-2002/02/08  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/SHORTCUTS: add F1 & F2
-
-2002/02/08  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added instructions for scanning on HP's MF devices to
-	the printer help page.
-	HP PhotoSmart printers do not scan, so do not show how to scan with
-	them.
-	Do not let dialogs of network configuration correction appear embedded
-	in the "Add printer" wizard.
-	Completed wizard mode for adding a printer in both recommended and
-	expert mode.
-
-	* printer.pm: Enabled transferring queues of HP multi-function devices
-	between spoolers.
-	CUPS 1.1.13 dies on SIGHUP, do normal restart instead.
-	Completed wizard mode for adding a printer in both recommended and
-	expert mode.
-
-2002/02/08  warly
-
-	* share/rpmsrate: add bootsplash in system 4
-
-2002/02/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm: fix error causing a bad window sizing when there is
-	a horiz scroll
-
-2002/02/07  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: fixed shadow when testing X
-
-2002/02/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/help_xml2pm.pl: fixed email address
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - don't pop the "do you want to install samba?"
-	  - rwindow is not a window when embedded, so set_default_size only if
-	possible
-
-	* my_gtk.pm: make perl_checker happy
-	ensure no more than one child is in the Plug
-
-	* interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
-	* interactive_gtk.pm: fix error causing a bad window sizing when there is
-	a horiz scroll
-	(exit): ensure USR1 is sent to mcc
-
-	* Xconfigurator.pm: allow to edit the hsyncrange and vsyncrange when
-	choosing monitor "Custom"
-
-	* install2.pm, install_steps.pm: create and use miscellaneousAfter (so
-	that SECURE_LEVEL is set *after* asking)
-
-	* diskdrake/interactive.pm (Options): wrap the help text
-
-	* standalone/diskdrake: handle --embedded xxx xxx
-
-2002/02/07  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* standalone/drakxtv, Makefile.config: add drakxtv (scantv gui)
-
-	* standalone/localedrake: fix pixel stuff: don't restart wm on cancel
-
-2002/02/07  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: beta 2
-
-	* printerdrake.pm: corrected wizard pb
-
-	* my_gtk.pm: wizard fixes
-
-2002/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): precise the type when mounting in standalone (for smb,
-	nfs would not need it)
-
-	* diskdrake/smbnfs_gtk.pm: 
-	  - don't pop the "do you want to install samba?"
-	  - rwindow is not a window when embedded, so set_default_size only if
-	possible
-
-	* interactive.pm: fix (causing XFdrake to use a combo instead of a list)
-
-	* my_gtk.pm: ensure no more than one child is in the Plug
-
-	* standalone/diskdrake: handle --embedded xxx xxx
-
-	* interactive_gtk.pm (exit): ensure USR1 is sent to mcc
-
-2002/02/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: removed ugly pink and ugly left bar for wizard mode
-
-2002/02/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, tools/oem-prepare: better handling of group linked
-	to hardware or options.
-
-2002/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: have frozen-bubble in GAMES at level 4
-
-2002/02/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/fi.po, share/po/DrakX.pot: updated French file
-
-2002/02/06  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Automatic configuration of the scanning part of HP's
-	multi-function devices.
-
-	* printerdrake.pm: Added some stuff for the Wizard mode.
-	Automatic configuration of the scanning part of HP's multi-function
-	devices.
-	Updated automatic package installation in printerdrake, no "kups" and
-	"qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
-	"rpmsrate" and "rpmsrate.server" appropriately.
-
-	* share/rpmsrate.server, share/rpmsrate: Added scanning packages to
-	INSTALL section, for HP MF device installation by printerdrake.
-	Updated automatic package installation in printerdrake, no "kups" and
-	"qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
-	"rpmsrate" and "rpmsrate.server" appropriately.
-
-2002/02/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
-	HP's multi-function devices.
-
-2002/02/05  dam's  <damien@mandrakesoft.com>
-
-	* standalone/logdrake: wizard updated
-	correction for mcc.
-
-2002/02/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate.server: synced with normal rpmsrate for Basque
-	management.
-
-	* install2.pm: auto_allocate for oem mode is not needed as oem script
-	create all necessary partition.
-
-	* install_any.pm: add support for Basque (no KDE).
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: newer syslinux 1.67.
-
-	* share/rpmsrate: add support for Basque (no netscape in such case)
-
-	* rescue/tree/etc/oem: select preferred kernel as kernel-\d.
-
-	* install_steps.pm: fixed logic, when someone want /root/drakx,
-	it has to check /root/drakx and not /root only.
-
-2002/02/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/sbin/modprobe: don't do insmod -f, it's not really necessary
-	and it taints the kernel (pabo)
-
-	* rescue/tree/etc/profile: use LD_LIBRARY_PATH in rescue so that PATH'ing
-	in /mnt
-	can really be used
-
-2002/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
-	* Xconfigurator.pm: testFinalConfig now always returns true if test is
-	skipped because of a bad_card (back to the old behaviour, this was no
-	good (the aim is to enable changing the monitor when test is skipped))
-
-	* share/po/fr.po: fix "Details" translated in "D�tails de la partition"
-	but is used at different
-	place where the meaning has nothing to do with "partitions"
-
-2002/02/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
-	HP's multi-function devices.
-
-2002/02/05  warly
-
-	* share/compssUsers.server: remove non server group from rpmsrate.server
-	add utilities group in compssUser.server
-	(webmin,ssh-server,wizards,monitoring)
-
-	* share/rpmsrate.server: begin rpmsrate.server cleaning
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: fix "help lilo when there is hdd with no hdc drive"
-
-	* Xconfigurator.pm: testFinalConfig now always returns true if test is
-	skipped because of a bad_card (back to the old behaviour, this was no
-	good (the aim is to enable changing the monitor when test is skipped))
-
-2002/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: log the "chkconfig --del gpm" when there is a serial
-	mouse
-
-2002/02/04  dam's  <damien@mandrakesoft.com>
-
-	* standalone/logdrake: corrected typo. Yvounet, check your code!!
-	embedded, explain
-
-	* my_gtk.pm: bug correction
-
-	* standalone/drakfont, services.pm, network/netconnect.pm: applied cooker
-	guy english review
-
-2002/02/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added v4l module all the time (along with dbe already
-	present).
-
-2002/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: have numlock activated when isLaptop rather than
-	$o->{pcmcia}
-
-2002/02/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
-	share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po,
-	share/po/sr.po, share/po/el.po, share/po/et.po, share/po/sk.po,
-	share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
-	share/po/uk.po, share/po/eo.po, share/po/nl.po, share/po/wa.po,
-	share/po/sv.po, share/po/zh_TW.po: updated some po files
-
-2002/02/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix creating /etc/security/msec/server
-
-	* share/po/fr.po: fix "More" translation
-
-2002/02/04  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Made HP multi-function devices configured
-	with HPOJ being displayed correctly by printerdrake.
-
-	* detect_devices.pm: Replace "Hewlett-Packard" by "HP" when HP device is
-	detected on a parallel port.
-
-2002/02/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update french translations
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: force a few more "list"s instead of "combo" boxes
-	since "format" is now handled for combo boxes, combo boxes are used in
-	much too many places. Fix this by forcing type "list" for some cases,
-	and using type "list" when a ask_from has only one entry
-
-	* interactive.pm: since "format" is now handled for combo boxes, combo
-	boxes are used in much too many places. Fix this by forcing type "list"
-	for some cases, and using type "list" when a ask_from has only one entry
-
-	* bootloader.pm: 
-	  - fix some vga text modes 80x30
-	  - chmod 600 lilo.conf when a password is given
-	  - fix general "append"
-	(thanks to David Eastcott)
-	"password" works without "restricted", not the other way round (reported
-	by David Eastcott)
-	fix typo
-
-2002/02/03  warly
-
-	* share/rpmsrate.server: synchronize with current cooker rpmsrate
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: force a few more "list"s instead of "combo" boxes
-	since "format" is now handled for combo boxes, combo boxes are used in
-	much too many places. Fix this by forcing type "list" for some cases,
-	and using type "list" when a ask_from has only one entry
-
-	* interactive.pm: since "format" is now handled for combo boxes, combo
-	boxes are used in much too many places. Fix this by forcing type "list"
-	for some cases, and using type "list" when a ask_from has only one entry
-
-	* bootloader.pm: fix typo
-	help lilo when there is hdd with no hdc drive (needs testing!)
-
-2002/02/03  warly
-
-	* share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
-	compssUsers.server
-
-2002/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: help lilo when there is hdd with no hdc drive (needs
-	testing!)
-
-2002/02/03  warly
-
-	* share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
-	compssUsers.server
-
-2002/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: XFree is now 4.2
-
-	* standalone/fileshareset: fix dropping samba sections which don't have
-	any "path="
-
-2002/02/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/DrakX.pot: updated Swedish file
-
-	* share/po/fr.po: merged again French file to recover some lost strings;
-	and added non breakable spaces at all the needed places as required
-	by French typography
-
-2002/02/01  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm: please perl_checker
-
-	* install_interactive.pm: use from_Mb for choosing the size of the windows
-	partition
-
-	* install_steps.pm: create symlink /etc/security/msec/server in security >
-	3
-
-2002/02/01  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: First steps of the implementation for the "Add printer"
-	wizard.
-
-	* detect_devices.pm: Made auto-detection working for HP DeskJet 840C on
-	USB
-	General improvements for reliability of USB printer auto-detection
-
-2002/02/01  yduret
-
-	* pixmaps/wiz_scannerdrake.png: readding it with -kb option (i am still
-	jeune and boulet)
-	rm for readding with -kb option (i am jeune and boulet)
-
-	* standalone/logdrake: ergo fix thx dadou report
-	fix --explain=foo bug that prevent to show anything
-
-	* bootlook.pm: ergo fix thx dadou report...
-
-2002/02/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm, standalone/drakbackup, printerdrake.pm,
-	standalone/logdrake: changed some strings to make translation easier
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/02/01  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm: please perl_checker
-
-	* install_interactive.pm: use from_Mb for choosing the size of the windows
-	partition
-
-	* Xconfigurator.pm: testFinalConfig now returns false if test is skipped
-	because of a bad_card or
-	verybad_card and $skip_badcard is not set
-
-2002/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/keyboards.tar.bz2, keyboard.pm: Added Tamil language and
-	keyboard choices (KDE is translated to Tamil)
-
-2002/01/31  yduret
-
-	* pixmaps/wiz_scannerdrake.png: on rajoute la zolie image
-
-2002/01/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* Xconfigurator.pm: Added setting of model=jp106 for Japanese keyboard
-
-	* keyboard.pm, share/keyboards.tar.bz2: Added Bulgarian "phonetic"
-	keyboard
-
-	* lang.pm: Enabled "ms" language in the language selection list (there are
-	Gnome and KDE
-	translations for it)
-
-	* share/po/be.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
-	share/po/es.po, share/po/bg.po, share/po/de.po, share/po/et.po,
-	share/po/el.po, share/po/ru.po, share/po/br.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/nl.po, share/po/ro.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po:
-	updated some po files
-
-2002/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add gnome-core in GNOME (used to be required?)
-
-	* Xconfigurator_consts.pm, Xconfigurator.pm: move "what is the
-	running_window_manager" and "ask_window_manager_to_logout" to any.pm
-
-	* any.pm (ask_window_manager_to_logout, running_window_manager): created
-	from Xconfigurator and cleaned
-	(selectLanguage): if $langs is empty, don't ask for "other languages"
-
-	* pixmaps/wiz_printerdrake.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* standalone/localedrake: now works in normal user: it modifies the
-	~/.i18n (todo: handle kde crazy variables?)
-
-	* lang.pm: handle read'ing and write'ing to a specified file (useful
-	example: ~/.i18n)
-
-2002/01/30  sdupont
-
-	* standalone/drakbackup: complex merging....
-	change /var/drakbackup to /var/lib/drakbackup
-	crontab update
-	mail report update
-	sendmail update
-	require rpm mode
-	code optimisation
-	remove about gi
-	new help function
-
-2002/01/29  Till Kamppeter <till@mandrakesoft.com>
-
-	* pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
-	printerdrake.
-
-	* printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
-	wizard.
-	Improvements for the selection of a local printer, especially when no or
-	one printer was detected.
-
-2002/01/29  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: icons placements are better
-
-2002/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakbug_report, standalone/drakautoinst, install2.pm,
-	install_any.pm, install_steps.pm, log.pm, docs/README, pkgs.pm: move
-	/root/* files (ddebug.log, install.log, report.bug,
-	auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
-	and also save stage1.log there
-
-	* partition_table_raw.pm: add new pixel-made grub signature
-
-	* crypto.pm: update land2tzs accordingly to new url2land
-	Add url2land entries for nl, it, at
-
-	* any.pm: move /root/* files (ddebug.log, install.log, report.bug,
-	auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
-	and also save stage1.log there
-	rephrase a little bit highest level
-	to not refer to "level 4" anymore
-	use formatAlaTeX for describing security levels
-
-	* install_steps_interactive.pm: fix thanks to chipaux msg about mkbootdisk
-
-2002/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po, share/po/sv.po, share/po/hr.po, share/po/de.po,
-	share/po/DrakX.pot, help.pm, share/po/it.po, share/po/eu.po,
-	share/po/es.po: updated pot file with help messages from manual
-
-2002/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: handle "format" for combo's
-
-	* bootloader.pm: use the new format for combo's to clean code handling
-	{vga} field
-
-	* diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
-	* any.pm: use the new format for combo's to clean code handling {vga}
-	field
-	handle the case where samba and/or nfs-utils are not installed
-
-	* install_steps.pm: move the various bootloader::add_append's in
-	setupBootloaderBefore
-
-	* diskdrake/smbnfs_gtk.pm: handle the case where samba and/or nfs-utils
-	are not installed
-
-	* install_steps_interactive.pm: visually unselect X and docs when minimal
-	install
-	"With X" choice is now working
-	handle "Cancel" on language selection
-
-2002/01/29  Till Kamppeter <till@mandrakesoft.com>
-
-	* pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
-	printerdrake.
-
-	* printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
-	wizard.
-	Improvements for the selection of a local printer, especially when no or
-	one printer was detected.
-
-2002/01/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* interactive.pm: fix pixel's minimal example using interactive.
-
-2002/01/29  yduret
-
-	* docs/interactive/ask_from_list, docs/interactive/wait_message,
-	docs/interactive/ask_from_treelist, docs/interactive/ask_from_listf,
-	docs/interactive/ask_from: added some snipet coe for example
-
-	* standalone/logdrake: logdrake is now under gi/perl-install/standalone
-
-2002/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake/hd_gtk.pm: look diskdrake.rc in another directory
-
-	* install_steps.pm: move the various bootloader::add_append's in
-	setupBootloaderBefore
-
-2002/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: do the few new translations
-
-	* standalone.pm: try to reflect hierarchy for */*.pm
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
-	printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
-	share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
-	standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
-	share/po/id.po: Corrected various English typos
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo
-
-	* partition_table.pm: warn if partitions have been renumbered due to a
-	partition being added or removed
-
-	* diskdrake/interactive.pm: don't warn_if_renumbered during install
-	warn if partitions have been renumbered due to a partition being added
-	or removed
-
-2002/01/28  siegel
-
-	* share/po/de.po: new german version
-
-2002/01/28  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Replaced "sleep" commands by a subroutine which waits
-	exactly until CUPS is ready.
-	CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
-	is not "known" to it.
-
-	* printer.pm: Removed debug helper line.
-	Replaced "sleep" commands by a subroutine which waits exactly until CUPS
-	is ready.
-	CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
-	is not "known" to it.
-
-2002/01/28  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/br.po: update brezhoneg translations
-
-	* share/po/fr.po: more french translations
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
-	printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
-	share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
-	standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
-	share/po/id.po: Corrected various English typos
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo
-
-	* diskdrake/interactive.pm, partition_table.pm: warn if partitions have
-	been renumbered due to a partition being added or removed
-
-2002/01/28  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm, network/netconnect.pm: debug network testing
-
-2002/01/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated color of
-	scroll bar and reduced its size.
-
-	* bootloader.pm: fixed get_append if key=mem.
-	timeout passed to 10 instead of 5.
-
-2002/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: update games rates
-
-2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (remove_advertising): ensure removing /tmp/drakx-images
-	can't fail
-
-	* any.pm: simpler&nicer solution for writing kppprc in utf8
-	have kppprc strings in utf8
-
-	* detect_devices.pm: remove test code
-
-	* install_steps.pm, bootloader.pm: cleanup perImageAppend code (hopefully
-	handling nicely the mem=nopentium case)
-
-	* diskdrake/smbnfs_gtk.pm: don't use wait_message's when waiting (waiting
-	is usually very short), use a waiting cursor instead.
-	(the wait_message's were causing bad interactivity stuff)
-
-2002/01/27  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: add a minimal example
-
-	* services.pm: 
-	  - move the require on my_gtk to ask_standalone_gtk
-	  - cleanup
-
-	* Makefile.config: 
-	  - adapt to new diskdrake modules
-	  - add logdrake to STANDALONEPMS_
-
-	* my_gtk.pm: strange protection against ensure_focus generating a "focus"
-	event causing a
-	dead-loop (reminder: ensure_focus helps ensuring a widget is focused)
-
-	* Makefile.drakxtools, standalone.pm, Makefile, diskdrake_interactive.pm,
-	install_interactive.pm, diskdrake.pm: 
-	  - adapt to new diskdrake modules
-	  - some cleanup in drakxtools build
-
-	* diskdrake/removable.pm: remove debugging code
-	new diskdrake modules (diskdrake_interactive is now
-	diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
-	created from diskdrake.pm)
-
-	* diskdrake/interactive.pm, diskdrake/hd_gtk.pm,
-	diskdrake/removable_gtk.pm: new diskdrake modules (diskdrake_interactive
-	is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk,
-	others created from diskdrake.pm)
-
-	* diskdrake/smbnfs_gtk.pm: fix updating the actions
-	new diskdrake modules (diskdrake_interactive is now
-	diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
-	created from diskdrake.pm)
-
-	* network/nfs.pm: find_exports: add a timeout
-
-	* fs.pm: new function fstab_to_string
-
-	* standalone/diskdrake: handle --removable *and* --removable=<dev>
-	handle --removable=<dev>
-	  - new options --hd, --nfs, --smb, --removable
-	  - adapt to new diskdrake modules
-	  - save $all_hds->{current_fstab} to know if /etc/fstab must be saved
-
-2002/01/25  fabman
-
-	* share/po/es.po: updated spanish translation
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add devfsd
-
-	* install_any.pm: remove_advertising: use rm_rf since we don't have the
-	real list of files (the .pl's are not in @advertising_images)
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Less important options only shown when
-	"Advanced" button clicked.
-	Handling of cursor position in the main window improved.
-	Handling of empty printer queue list in main window improved.
-	Removed line breaks from longer texts, so that text flows into window
-	nicely
-	Minor text improvements.
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install_any.pm: advertising engine updated
-
-	* share/logo-mandrake.png: beta logo
-
-	* install_steps_gtk.pm: corrected decy
-	advertising engine updated
-
-2002/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: please find a better fix
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
-	linux
-	fix spelling
-
-	* Makefile: call clean-rpmsrate
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm, install_any.pm: advertising engine updated
-
-	* share/po/fr.po: typo
-
-	* share/logo-mandrake.png: beta logo
-
-2002/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: please find a better fix
-
-2002/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: ensure errors propagate
-
-	* bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
-	linux
-	fix spelling
-
-	* Makefile: call clean-rpmsrate
-
-	* mdk-stage1/pci-resource/Makefile: silly shell
-	ensure errors propagate
-
-2002/01/25  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po: typo
-	corrected too long label Mise � niveau deas paquetages seule. please
-	find a better FIX
-
-2002/01/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: cosmetic changes.
-
-	* pkgs.pm: fixed try opening to trigger changeCD callback.
-
-2002/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add msec in any install
-	  - use BIGMEM flag for kernel-enterprise
-	  - use SMP flag for kernel-smp
-	(those 2 goes together with Warly's clean-rpmsrate)
-	add flag DOCS which should work together with !excludedocs
-
-	* any.pm: ensure grub is installed if grub is chosen
-
-	* install_any.pm: 
-	  - add DOCS (based on !excludedocs)
-	  - set BIGMEM and SMP flags
-	(since kernel-smp and kernel-enterprise sub-numbers are better handled
-	by
-	 rpmsrate together with Warly's clean-rpmsrate)
-
-	* install_steps_interactive.pm, install2.pm: minimal install now handles
-	excludedocs
-
-	* install_steps.pm: log excludedocs
-	minimal install now handles excludedocs
-	put devfs=mount only if devfsd is installed
-
-	* diskdrake_interactive.pm: truncate lvm name to 63 characters since
-	longer vg names are not allowed
-
-2002/01/24  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm, printer.pm, printerdrake.pm: Fixed bug of empty menu
-	entry appearing after adding a new printer.
-	Modified "Local Printer" dialog to be more newbie-friendly.
-
-2002/01/23  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: updated speedtouch code to use pppoa3
-
-	* my_gtk.pm: removed font loading
-
-2002/01/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: fixed to allow multiple mem=xxx parameter (especially
-	mem=nopentium).
-
-	* install_steps.pm: restored mem=nopentium.
-	removed mem=nopentium.
-
-2002/01/23  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: name mangling max length set to 12
-	use name mangling for samba labels
-
-2002/01/23  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: New user interface in main window
-	More printer info in printer modification window
-	Better support for remote CUPS printers
-
-2002/01/22  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: improved widget_icons
-
-	* install_steps.pm: added net_cnx_pg output when configuring network in
-	auto install
-
-2002/01/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added support to save already existing synthesis file.
-
-	* install_any.pm: changed code to build synthesis file, check if they have
-	not already been copied
-	from mirror, or build them using parsehdlist.
-
-2002/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: Translate a few things more
-
-2002/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: cleanup error messages (and fix diskdrake's)
-	defaults to ext3 instead of ext2
-
-	* interactive.pm: add "quit_if_double_click" and "tree_expanded" flags
-	(request from till)
-	add feature "allow_empty_list" for "list" entries (disables the special
-	cases for 0 and 1 element lists)
-
-	* install_any.pm, diskdrake.pm: cleanup error messages (and fix
-	diskdrake's)
-
-	* install_interactive.pm, raid.pm: defaults to ext3 instead of ext2
-
-	* partition_table.pm: remove unused auto_win_extended stuff
-	handle extended partitions with no partitions inside (esp. for the first
-	hda5 & windows XP)
-
-	* bootloader.pm: 
-	  - fix default not being formatted like labels for lilo
-	  - check the label is not already used *case-sensitively*
-	  - check a kernel_or_dev is given
-
-	* any.pm: 
-	  - remove the default entry when that entry is removed
-	  - use allow_empty_list for displaying the entries
-	  - fix default not being formatted like labels for lilo
-	  - check the label is not already used *case-sensitively*
-	  - check a kernel_or_dev is given
-
-	* fsedit.pm: yet again better error reporting
-	defaults to ext3 instead of ext2
-
-	* standalone/drakboot, bootlook.pm: fix yves's code duplication of
-	lilo_choice (use $::lilo_choice in bootlook)
-
-	* interactive_gtk.pm: add "quit_if_double_click" and "tree_expanded" flags
-	(request from till)
-
-	* install_steps_interactive.pm: cleanup error messages (and fix
-	diskdrake's)
-	better messages for the minimal installs
-
-	* standalone/diskdrake: yet again better error reporting
-	cleanup error messages (and fix diskdrake's)
-
-	* share/rpmsrate: move mandrake-mime from SYSTEM to X
-	lower sndconfig
-
-2002/01/22  fcrozat
-
-	* share/rpmsrate: Really install gnome control center when installing
-	GNOME
-
-2002/01/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: added mem=nopentium for any Athlon or Duron processor.
-
-2002/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* Makefile: exclude standalone from testing
-
-	* share/po/fr.po: resolve small conflict
-
-2002/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: add the new "mii" module to 'net_raw'
-
-	* install_steps_interactive.pm: better messages for the minimal installs
-	fix a few cancel's (reported by slegros)
-	don't ask security level in non-expert
-
-	* install_steps_gtk.pm, install_interactive.pm: fix a few cancel's
-	(reported by slegros)
-
-	* share/rpmsrate: move mandrake-mime from SYSTEM to X
-	lower sndconfig
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
-	* install_steps_interactive.pm, install2.pm: can't call
-	any::config_libsafe so early during install, move it where msec is
-	called
-
-	* any.pm: quiet perl's warning
-
-2002/01/21  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm: fixed network conf in auto install
-	corrected network down
-
-	* my_gtk.pm: removed debug print
-	icons widget improvment : icon placment, highlighting
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: increase the size of the "Choose action" box
-
-	* diskdrake_interactive.pm: remove the "Active" partition feature
-
-	* interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing
-
-	* install2.pm: can't call any::config_libsafe so early during install,
-	move it where msec is called
-
-	* install_steps_interactive.pm: can't call any::config_libsafe so early
-	during install, move it where msec is called
-	cleanup, update, enhance security level choice
-
-	* standalone/draksec: cleanup, update, enhance security level choice
-
-	* install_steps.pm: remove deprecated msec groups adding
-	cleanup
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: newer grub
-
-	* any.pm: quiet perl's warning
-	cleanup, update, enhance security level choice
-	when creating users, add handling of xgrp/rpm/adm/wheel groups in high
-	security
-	fix advice about "usermod -G"
-
-	* tools/i386/netboot/menu.lst.example: add gateway parameter
-
-2002/01/21  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: new ugly icon
-
-	* install_steps.pm: corrected network down
-
-2002/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2002/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: add helvR12_iso15
-
-	* install_steps_interactive.pm: """ When I choose a / partition smaller
-	than 200 MB, the installation
-	gives me an error message complaining that my system does not
-	    have enough free space for the installation, although basesystem
-	install
-	    require less than 100 MB. """
-	up to around 250MB, minimal install is chosen.
-	questions are: base system only, or no X, or normal.
-
-2002/01/21  siegel
-
-	* share/po/de.po: updates
-
-	* standalone/drakbackup: fixed i18n bugs
-
-2002/01/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: call msec with run_commands=0 to fix the network reloading
-	(causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakbackup: sorry, _("$_") is not allowed
-
-2002/01/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/fr.po: fix "`msgid' and `msgstr' entries do not both end with
-	'\n'"
-
-	* install2.pm: call msec with run_commands=0 to fix the network reloading
-	(causing various problems, esp. "Net::FTP: Timeout" at X config step)
-
-2002/01/20  yduret
-
-	* timezone.pm: added Italy (time.ien.it) in
-
-2002/01/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* standalone/drakbackup: Rework English syntax in drakbackup - hopefully
-	I've got the intent correct ;^)
-
-2002/01/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* detect_devices.pm: Replaced USB printer auto-detection by a more
-	reliable method.
-
-2002/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: changed Update -> Upgrade for installation
-	class.
-
-2002/01/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/draknet: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - fix an english typo, s/connexion/connection/
-
-	* standalone/drakgw: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - write higher-level 'explanations'
-	  - small fix, s/`ls ..`/glob(..)/
-
-	* standalone/scannerdrake: 
-	  - move 'use standalone' up to comply to 'explanations'
-	  - fix a small english problem
-
-	* share/po/fr.po: reduce a lot of fuzzy and untranslations
-	large stuff from printerdrake, drakbackup and drakfont still to do :-)
-
-	* c/stuff.xs.pm, standalone/printerdrake, standalone/net_monitor,
-	standalone/drakautoinst, standalone/keyboarddrake,
-	standalone/localedrake, standalone/livedrake, standalone/drakboot,
-	standalone/draksec, standalone/tinyfirewall, standalone/mousedrake,
-	standalone/drakxservices, standalone.pm, standalone/drakproxy,
-	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
-	standalone/drakxconf, log.pm, standalone/logdrake,
-	standalone/drakbackup, standalone/drakfont: 
-	  - write the 'common' part of the 'explanations' stuff,
-	with nice help from Pixel for the tough Perl part
-	  - move 'use standalone' up in all standalone apps,
-	  to comply to 'explanations'
-
-2002/01/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2,
-	share/fonts.tar.bz2: changes to get in line with new XFree86
-
-2002/01/18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
-	locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: add update flag for urpmi medium.
-
-	* install_steps_interactive.pm: even if user cancel update of package on
-	tree, allow urpmi to install the medium.
-	avoid downNetwork as no difference are made between ethernet or ppp.
-	fixed typo.
-	allow cancel when installUpdates.
-
-	* crypto.pm: add update medium for crypto for urpmi (flag update).
-	fixed typo.
-	allow selection/deselection of update medium (for cancel of
-	installation).
-
-	* install_steps_gtk.pm: allow choosePackageTree to display a cancel if a
-	specific medium has been given.
-
-2002/01/18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
-	locale on the box so that XI18N_OBJS's and common are included
-
-2002/01/18  sdupont
-
-	* standalone/drakfont: update warning messages (qa).
-
-	* standalone/drakbackup: fix traduction problems and more ...
-
-2002/01/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm, diskdrake_interactive.pm: better error message when auto
-	allocate doesn't do anything
-
-2002/01/17  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm, network/netconnect.pm: draknet : success message only
-	if success
-
-	* my_gtk.pm: added timeout for redrawing icon widget
-
-2002/01/17  fcrozat
-
-	* share/rpmsrate: kdebase-nsplugins will be installed by default when
-	selecting KDE
-
-2002/01/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid upgrading a package by selection on files unless it has
-	been obsoleted.
-
-2002/01/17  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: check the mountpoint is valid for encrypting (disallow "/"
-	and "/usr")
-
-	* fsedit.pm, diskdrake_interactive.pm: better error message when auto
-	allocate doesn't do anything
-	check the mountpoint is valid for encrypting (disallow "/" and "/usr")
-
-	* fs.pm: do not create /swap
-
-	* services.pm: move service apcupsd from Printing to System
-
-	* bootloader.pm: fix many disks bios remapping (esp. booting on scsi when
-	ide is present)
-
-2002/01/17  sdupont
-
-	* standalone/drakbackup: stable version for qa pkg.
-	(without unstables options)
-
-2002/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix cancel on scsi module loading
-
-2002/01/16  sdupont
-
-	* standalone/drakbackup: update send mail.
-	(pixel mode. ;))
-
-2002/01/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: installUpdates: use formatAlaTeX
-
-2002/01/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix cancel on scsi module loading
-
-	* install_steps_interactive.pm: don't drop default_packages in "Base
-	system only"
-
-	* standalone/fileshareset: add locking to ensure things are in a proper
-	state
-
-2002/01/15  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: advertising engine amelioration
-
-	* my_gtk.pm: automatic icon placement in icon_labels_widget
-
-2002/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: remove the test trick
-	encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
-	diskdrake.pm: encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-2002/01/15  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn_consts.pm: updated
-
-2002/01/15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: remove the test trick
-	encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
-	diskdrake.pm: encrypted filesystem handling:
-	  - using losetup
-	  - add "Options" for partitions in diskdrake (expert mode)
-
-	* any.pm: have ddcxinfos take the best result of every run
-
-2002/01/15  sdupont
-
-	* standalone/drakfont: fix progress bar problem.
-	some gi updates:
-	  - windows font importation.
-	 - advanced font importation.
-	 - licence interface.
-	 - ...
-
-	* standalone/drakbackup: new ./drakbackup --show-conf
-	fix daemon problem (media to use).
-	update informations on drakbackup report mail.
-	__ 3290 lines.
-	man pages fr created.
-	some code cleaning on backend mode. (all_user_list && return_path)
-	new functions on backend mode:
-		- show-conf
-		- debug
-	        - help
-	        - version.
-
-2002/01/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - eata is SCSI adapter, not 'disk' adapter
-	  - have eata module in boot floppies
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: we need also "big" modules in
-	pci ids
-
-	* share/rpmsrate: have lbreakout weigthed 4 instead of 2
-
-	* mdk-stage1/modules.c: suggest other.img in file-not-found-in-archive
-	(sugg David Faure
-	and Pixel)
-
-2002/01/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: fix typo (making auto installs working again)
-
-2002/01/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: s/lbreakout/lbreakout2/
-
-	* install_steps_interactive.pm: cleanup
-
-2002/01/13  sdupont
-
-	* standalone/drakbackup: some updates ...
-	in "more option" steps user could choose to receive a report by mail for
-	each backups.
-	ftp backup work.
-	fix time problems.
-	remove doc from file.
-	security fix for configuration file.
-
-2002/01/11  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: advertising engine works !
-	champagne.
-	still some display bugs, but they will be corrected later.
-	need new ads and adequat description file
-	new advertising engine
-
-	* install_any.pm: modifications for new avertising engine
-
-	* my_gtk.pm: new icons placement
-
-2002/01/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po,
-	share/po/tr.po, share/po/ar.po, share/po/az.po, share/po/eu.po,
-	share/po/sl.po, share/po/vi.po, share/po/eo.po, share/po/wa.po,
-	share/po/sv.po, share/po/zh_TW.po, share/po/Makefile, share/po/af.po,
-	share/po/it.po: updated Spanish file; merged help-* files
-
-2002/01/11  sdupont
-
-	* standalone/drakbackup: update header pixmaps.
-	correction of message problem.
-
-	* pixmaps/drakfont.620x57.png, pixmaps/BDO-drakebackup1.png,
-	pixmaps/drakbackup.540x57.png: update pixmaps for drakbakup & drakfont.
-
-	* standalone/drakfont: update header pixmaps.
-
-2002/01/10  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: domainname corection
-
-	* network/network.pm: domainname corection
-	corrected network domainname pb
-
-	* install2.pm: corrected read_resolv => read_conf
-
-2002/01/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: english taste inspired by daminette.
-
-2002/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/lsparts: better looking output of type of partition (%x => %0x)
-
-2002/01/09  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, standalone/net_monitor, standalone/draknet,
-	network/network.pm, network/modem.pm, network/netconnect.pm: big merge
-	from update 8.1 with cvs
-	First part. Part 2 following
-
-	* my_gtk.pm: added bold option in text creation. Some corrections
-
-	* install_steps_interactive.pm: corrected fpons typo
-
-2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed too many package selected for No X or With X
-	option of minimal installation.
-
-	* install_steps_interactive.pm: avoid asking for minimal install for
-	upgrade.
-	fixed stupid.
-
-	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
-	for urpmi.
-
-	* pkgs.pm: use rpm version comparison function.
-
-	* c/stuff.xs.pm: added rpmvercmp.
-
-2002/01/08  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: cosmetik
-
-2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: added eval around pixmap drawing for advertising.
-
-2002/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakbackup: another round of bad use of _() fixes.
-	fixed bad use of _().
-
-2002/01/08  sdupont
-
-	* standalone/drakbackup: drakbackup work ...
-	incremental backup and restore work.
-
-2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-	* standalone/drakautoinst: removed stupid invocation of _("$_"), is it
-	correct code to change it to $_ only ?
-
-2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-	* standalone/drakautoinst: removed stupid invocation of _("$_"), is it
-	correct code to change it to $_ only ?
-
-2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile: again fixed dam's sucking, please dam's check what you write
-	before commiting.
-
-2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-2002/01/07  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: socmetic
-	typo
-	added debug mode for the whole install
-
-	* my_gtk.pm: removed print
-	new pack_start functions, powerpack sub added (code from adrien)
-	incorporated adrien's code to generalize pack functions
-	minor bug fixes
-
-	* install_steps.pm, network/netconnect.pm: corrected network connection
-	during install
-
-	* install2: added debug mode for the whole install
-
-2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* steps.pm: changed installUpdates after summary (to get corrected
-	timezone).
-
-	* install_any.pm: separated setDefaultPackages from setPackages because it
-	is used by allowing
-	only base system to be installed (allow remade a better package
-	selection).
-
-	* crypto.pm: added bestMirror method to retrieve a good mirror (according
-	to timezone) and
-	add salt with random number to avoid using always the same.
-
-	* install2.pm: added option to only upgrade packages.
-
-	* install_steps_interactive.pm: added minimal type of install support.
-
-	* share/list: fixed to match newer menu package.
-
-	* Makefile: fixed overwriting of install2 filtering, keep diagnostic and
-	strict for debug mode.
-
-2002/01/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: also log server name for HTTP install
-
-2002/01/04  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, install_steps.pm, network/tools.pm, my_gtk.pm,
-	network/netconnect.pm: corrected minor bugs in network (among others bug
-	"modifying read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-
-2002/01/04  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected minor bugs in network (among others bug "modifying
-	read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-	corrected font display : no useless font->height, but ascent + descent
-	updated
-
-	* network/isdn_consts.pm: changed asus isdn hisax identify
-
-	* network/adsl.pm, install_steps.pm, network/tools.pm,
-	network/netconnect.pm: corrected minor bugs in network (among others bug
-	"modifying read only values")
-	recode upNetwork and downNetwork (it might work, at least if you are
-	lucky);
-
-2002/01/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* http.pm, install2.pm, steps.pm, install_any.pm: added update
-	installation support to install (big modifs need testing).
-
-	* pkgs.pm: allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* crypto.pm: removed test code.
-	allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps_interactive.pm: removed obsoleted comment.
-	allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps_gtk.pm: fixed empty flat package selection when giving a
-	limit to medium.
-	added update installation support to install (big modifs need testing).
-
-	* install_steps.pm: allow to use same identifier for security medium (1u).
-	re-install urpmi.
-	allow some error to be catched.
-	fix for auto updates.
-	added update installation support to install (big modifs need testing).
-
-2002/01/04  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: enable easy patch-adding of pcitable and usbtable
-	entries
-
-2002/01/03  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: user can be equal to 500
-
-2002/01/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated code to create synthesis file (including
-	provides on files).
-
-2002/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ar.po: updated Arabic file
-
-2002/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, Xconfig.pm: save the output of ddcxinfos before
-	modprobe'ing i810fb, and use that output for Xconfig (when i810fb is
-	modprobe'd, ddc probe doesn't work anymore)
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: fix english messages
-
-	* share/rpmsrate: as asked by Vincent Danen, lower uucp and raise sudo
-
-	* pkgs.pm: prefer gcc-cpp
-
-	* interactive_gtk.pm, interactive.pm: toggle Advanced/Basic button
-
-	* any.pm: fix english messages
-	save the output of ddcxinfos before modprobe'ing i810fb, and use that
-	output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work
-	anymore)
-
-2002/01/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: changed @euro locales to plain names; now old currencies ones
-	are obsolete
-
-2001/12/31  sdupont
-
-	* standalone/drakfont: new fixed size and add a head pixmap (to update).
-
-	* standalone/drakbackup: lots of update ...
-	  - cron work.
-	 - backup incremental & normal work.
-	 - corrupted backup data files supported.
-	 - error messages updated.
-	 - aff list of backup data files pbs.
-	 - test all backup files before to restore it.
-
-2001/12/30  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
-	root reserved part is 0% (and not 5%)
-
-2001/12/30  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
-	root reserved part is 0% (and not 5%)
-
-2001/12/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectMouse): when selecting a usb mouse,
-	call setup_thiskind with
-	at_least_one=1 (so that pci_class probe is used and so unknown
-	serial_usb
-	recognised (cf ldetect))
-
-	* modules.pm (load_thiskind): allow $probe_type to be given, allowing
-	forced pci probe (unsafe)
-
-	* any.pm (setup_thiskind_backend): when at_least_one==1, try load_thiskind
-	forcing
-	pci_class probe when no modules is found.
-
-2001/12/28  sdupont
-
-	* standalone/drakbackup: update select data on backup cd
-
-2001/12/27  sdupont
-
-	* standalone/drakbackup: fix of user selection during restore step.
-			remove return_file_date.
-			change algo for incremental backup.
-
-2001/12/26  sdupont
-
-	* standalone/drakbackup: some gi corrections & update.
-	 incremental restore.
-
-2001/12/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: s/use pkgs/require pkgs/ since pkgs::versionCompare is
-	only used during install
-
-	* my_gtk.pm: export gtkcolor (used in install_steps_gtk)
-	make perl_checker happy
-
-2001/12/22  sdupont
-
-	* pixmaps/backup_bot.png, pixmaps/cdrom.png, pixmaps/backup_time.png,
-	pixmaps/backup_bot2.png, pixmaps/backup_left.png, pixmaps/net.png,
-	pixmaps/backup_hd.png, pixmaps/backup_title.png,
-	pixmaps/backup_left2.png, pixmaps/filedialog.png, pixmaps/hd.png,
-	pixmaps/backup_options.png, pixmaps/backup_net.png: remove old
-	drakbackup pixmaps files.
-
-	* pixmaps/ic82-back-up-16.png, pixmaps/ic82-discdurwhat-40.png,
-	pixmaps/ic82-tape-40.png, pixmaps/ic82-moreoption-40.png,
-	pixmaps/ic82-where-40.png, pixmaps/ic82-system-40.png,
-	pixmaps/ic82-others-40.png, pixmaps/ic82-systemeplus-40.png,
-	pixmaps/ic82-network-40.png, pixmaps/ic82-CD-40.png,
-	pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
-	pixmaps/ic82-users-40.png, pixmaps/ic82-dossier-32.png,
-	pixmaps/ic82-back-up-48.png: drakbackup designer icons.
-
-	* standalone/drakbackup: add pixmaps on backup step.
-	new designer pixmaps on drakbackup.
-
-2001/12/21  sdupont
-
-	* standalone/drakbackup: some update in file name parsing...
-	etc ...
-
-	* pixmaps/BDO-drakebackup1.png: drakbackup
-
-2001/12/20  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: API changed, so call changed
-
-	* share/logo-mandrake.png: new ayo logo
-
-2001/12/20  sdupont
-
-	* standalone/drakbackup: update the todo header
-	the REQUIRE header
-	& code cleaning
-	  - tar -cvf tarfilename --after-date="sept 1, 2000" /home
-	   l.380 incremental: date -> if already exist do find -m ... | tar ...
-	   non incremental: date + delete old before the backup
-	  - correct detection of backups during restore.
-	  - gi for other media during restore. hd-> ok
-	  - backend for build backup update and support
-	  incremental backups.
-	  - real incremental backup
-	update resore & help.
-
-2001/12/19  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: update graphical backend
-
-2001/12/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add dl2k.o (nic module) per request of nplanel
-
-2001/12/19  sdupont
-
-	* standalone/drakbackup: 
-	  - gi for other media during restore. hd-> ok
-	  - backend for build backup update and support
-	incremental backups.
-	  - real incremental backup
-	add other media source during restore.
-	  - update help & license.
-	  - code cleaning.
-	  - ask during whqt sys step if user want to backup critical
-	  files, like /etc/passwd /etc/group /etc/fstab
-	  - use preserve permissions during tar
-	  - begin of total backup step.( all partitions wanted, windows
-	partitions for example!)
-	  - remove replace mode (backup_*_version is enought)
-
-2001/12/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: fixed dam's sucking (syntax error only, code is
-	untested).
-
-2001/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix typos
-
-2001/12/18  sdupont
-
-	* standalone/drakfont: include new pixmap on main menu.
-
-	* standalone/drakbackup: sort lists in all lists selection.
-			correct use of incremental backup
-			parse of restore & system state.
-	fix restore user selection problems
-	fix build backup data selection problems
-	ect ...
-	drakbackup -> drakxtools.rpm
-
-	* pixmaps/ic-drakfont-48.png: drakfont pixmap...
-
-2001/12/18  yduret
-
-	* standalone/logdrake: fix console mode : exit now
-
-2001/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: fix typos
-
-2001/12/17  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: power graphical backend update : text is now
-	centered
-
-	* my_gtk.pm: power graphical backend update : text is now centered
-	updated new graphical backend
-
-2001/12/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_gtk.pm, standalone/drakgw: drakgw for gold
-
-	* tools/pcmcia_config.patch: remove permanently (using
-	patch_pcmcia_config.pl now)
-
-2001/12/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
-	tmpfs
-
-2001/12/17  sdupont
-
-	* standalone/drakbackup:
-	________________________________________________________________
-	DONE:
-	incremental backups have depends whith replace options.
-	     gtklist not maximized.
-	     restore mode.
-	     view date during restore
-	     view size of file, date & hours during backup on CD
-	________________________________________________________________
-
-2001/12/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
-	tmpfs
-
-2001/12/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new picture for 8.2.
-
-2001/12/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: change again way of selection
-	PCI entries :
-	what's in mar files --> what's given by modules (e.g. just
-	as update_kernel does)
-
-2001/12/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: use "askdisplay" to ask a question at begining of install
-	for what
-	display you want to use during install
-
-	* Makefile, tools/patch_pcmcia_config.pl: externalize patch_pcmcia_config
-	(from make_boot_img)
-	because we need it in perl-install/Makefile also
-
-	* mdk-stage1/rescue-gui.c, rescue/make_rescue_img, rescue/rescue-doc,
-	rescue/Makefile: have a bunch of Rescue documentation directly
-	available from the Rescue-menu following suggestions
-	by Denis among others
-
-2001/12/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: enable easy screenshot'ing
-	  - ensure /usr is formatted if / is
-	  - remove /var/lib/rpm if /var is kept
-
-	* common.pm, docs/README: enable easy screenshot'ing
-
-2001/12/12  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/make_rescue_img: larger rescue image on PPC to accomodate huge
-	xfs module
-
-	* bootloader.pm: mods to address new yaboot's lack of symlink ability, xfs
-	initrd load
-
-2001/12/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/stage1.h: support
-	"filename" in DHCP answers and give this
-	to stage2 as --kickstart parameter
-
-2001/12/11  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, keyboard.pm: finish journalled fs usage - PPC,
-	add "\n" keyboard.pm, new modelines
-
-2001/12/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added network package not present in @needToCopy
-	(package that may be installed
-	by DrakX to avoid re-asking of CD1).
-
-	* bootloader.pm: added safe guard against looping symlink.
-
-2001/12/10  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, bootloader.pm: 
-	  - fix bootloader::add_append
-	  - add handling of serial console
-
-	* http.pm, install_any.pm: enable http:// in auto_install file location
-
-2001/12/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
-	* install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
-	* bootloader.pm (suggest, add_kernel): much cleanup
-
-	* diskdrake.pm: fix call to fileshare_config
-
-2001/12/05  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: updateed logo
-
-2001/12/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile, mdk-stage1/pcmcia_/cardmgr.c: 
-	  - fix problems with sockets not initialized (disabling
-	hotplug support -> cardmgr handles sockets)
-	  - fix problems with PCMCIA net adapters now using PCI
-	  modules, by adding PCMCIA base code in `network.img'
-
-2001/12/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: no need to give kernelVersion to bootloader::suggest
-
-	* pkgs.pm (selectPackage): hard coded preference to simple kernel
-
-	* install_any.pm (kernelVersion): looks at /boot/vmlinuz
-
-	* diskdrake.pm: fix call to fileshare_config
-
-	* steps.pm: createBootdisk now after setupBootloader (together with dumber
-	install_any::kernelVersion)
-
-	* network/tools.pm: fix missing ";" (thanks to Robert Fox)
-
-	* bootloader.pm (suggest, add_kernel): much cleanup
-
-	* fs.pm: fix type "smb" vs "smbfs", and handle options in fs::mount
-
-2001/12/05  sdupont
-
-	* pixmaps/backup_bot2.png: update pixmaps
-
-	* standalone/drakbackup: todo : scp ssl sftp rsync connections perl || c ?
-	done : bzip2 backup
-	merge
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakbackup: corrected pixmap path
-	corrected pixmap path
-
-	* Makefile.config: added drakbackup drakfont
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* any.pm, mdk-stage1/log.c, docs/README: save stage1.log and have it in
-	report.bug
-
-	* mdk-stage1/automatic.c, mdk-stage1/doc/TECH-INFOS: support shorter
-	versions of automatic keywords to beat problems with very long kernel
-	commandlines
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-	* c/stuff.xs.pm: floppy_info: add missing close(fd)
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: cleaner smbclient call
-
-	* install_steps.pm: re-enable supermount by default
-
-2001/12/04  sdupont
-
-	* pixmaps/backup_bot.png, pixmaps/backup_left.png: correct colors
-	problems.
-
-	* standalone/drakbackup: bzip2 ok for compression to see: decomp without
-	pbs whith tar.gz and tar.bz2
-	todo: update mode -> decomp + update tar file + recomp
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: re-enable supermount by default
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fix bad parsing of package to copy (when one doen't
-	exist anymore) in
-	postinstall_rpms directory.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: re-enable supermount by default
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: additional package for wlan
-
-	* network/tools.pm: corrected pipe reading
-
-2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: make sure lilo is installed on automatic mode.
-
-	* install_any.pm: fix bad parsing of package to copy (when one doen't
-	exist anymore) in
-	postinstall_rpms directory.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_interactive.pm: try to not get something poorly wrapped
-
-	* mdk-stage1/modules.c: fpons is a sucking chief
-
-	* modules.pm, mdk-stage1/usb-resource/update-usb-ids.pl,
-	mdk-stage1/Makefile, mdk-stage1/.cvsignore, mdk-stage1/probing.c:
-	support install from USB CDROMS (using usb-storage)
-
-2001/12/04  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm: cleaner smbclient call
-
-2001/12/04  sdupont
-
-	* standalone/drakbackup: last update... for cooker
-	drakbackup deamon -> ok
-	drakbackup cvs -> to do (only for /etc)
-	drakbackup wizard -> only last step
-	drakbackup cd -> device detection and ask for only iso file.
-	drakbackup net -> do rsync
-	drakbackup begin -> todo : update initial message
-	update help and about.
-
-2001/12/04  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: additional package for wlan
-
-2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: make sure lilo is installed on automatic mode.
-
-	* mdk-stage1/modules.c: fixed g�g� sucking.
-
-2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: fpons is a sucking chief
-
-2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: fixed g�g� sucking.
-
-2001/12/04  sdupont
-
-	* standalone/drakbackup: update...
-
-2001/12/03  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed use gtk
-
-2001/12/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/updatehdlist: initial revision, simple way to update a local set
-	of medium from /RPMS.
-
-2001/12/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: typo of last commit (unused variable -> could not
-	compile)
-
-2001/12/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/hu.po, share/po/es.po: updated Hungarian
-	and Spanish files
-
-2001/12/03  sdupont
-
-	* standalone/drakbackup: update
-	option step.
-	write other file content.
-	restore gi.
-
-2001/12/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/12/01  sdupont
-
-	* standalone/drakbackup: do not include browser cache.
-
-2001/11/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* docs/spec-DrakX-8.0.html: added spec (forgotten for quite a long)
-
-2001/11/30  gbeauchesne
-
-	* partition_table_gpt.pm: 
-	  - cleanups from mainline
-
-	* modules.pm: Suckiness fixes from mainline (gc):
-	  - Do parse /proc/modules in reverse order
-	  - Fix "convert old scsi_hostadapter's to new probeall" scheme
-
-	* bootloader.pm: 
-	  - Don't forget to link the initrd to the real image in /boot/efi/ too
-	  - Remove DEBUG printouts in install_efi_boot_menu
-
-2001/11/30  Pixel  <pixel@mandrakesoft.com>
-
-	* network/smb.pm, any.pm, Makefile.drakxtools, standalone/diskdrake,
-	Makefile.config, diskdrake.pm: fileshare should be ok, handle diskdrake
-	--fileshare, fix smb import
-
-2001/11/30  sdupont
-
-	* pixmaps/backup_left2.png: drakbackup pixmap
-
-	* standalone/drakbackup: backend mode-> ok for hd
-	we can use drakbackup !.
-	todo :
-		backend mode:
-			- net
-			- cd
-	
-		advanced mode:
-			- device detection (cd writer)
-	
-		wizard:
-			- end of this step.
-	
-		gi:
-			- option step in adnanced step to choice
-			for example tar.gz or tar.gz2 ...
-	update
-	restore step 1 & 2.
-	adv step -> ok
-	todo: wizard ...
-	little update!
-	
-	variables correction in advanced step.
-	wizard user question, sys question & daemon
-
-2001/11/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Remove linux_logo
-
-2001/11/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add wvlan_cs
-
-	* mdk-stage1/modules.c: remove unneeded handling of "alias
-	scsi_hostadapter"
-
-	* mdk-stage1/stage1.c: add another expert_third_party_modules at the end
-	of enabling-pcmcia-stuff
-
-2001/11/29  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: remove the export tree for nfs/smb feature, remove some
-	test code
-	tentative version with export/import nfs/smb tree (committed to have it
-	in CVS as the export tree is already deprecated)
-
-	* standalone/fileshareset: 
-	  - allow root to export everything
-	  - remove empty mntpoint (from smb)
-
-2001/11/29  sdupont
-
-	* standalone/drakbackup: just update....
-	advanced: users correction during save.
-	user pass, user login, path to save local or on host
-	          combo for network protocol.
-	wizrad:   already to do!
-	CDRW burn:     todo: devices detection (see to_fond_cd).
-	code cleaning.
-
-	* standalone/drakfont: cleanning code.
-
-2001/11/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - fix pixel sucks of not parsing /proc/modules in
-	reverse order
-	  - be more in sync regarding names of pcmcia drivers
-
-	* any.pm: add modules.conf in report.bug
-
-2001/11/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_CN.po, share/po/zh_TW.po: updated Chinese file
-
-2001/11/28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (read_conf): fix "convert old scsi_hostadapter's to new
-	probeall"
-
-	* standalone/drakbackup: make check_what_user works
-
-	* standalone/fileshareset: better description
-	gr_mem in getgrent is space separated, not comma separated
-	add samba handling. Should be finished now :)
-
-2001/11/28  sdupont
-
-	* pixmaps/backup_bot2.png, pixmaps/quit.png: drakbackup pixmaps.
-
-	* standalone/drakbackup: no important changement!
-	clean code
-	update!
-	for gc & Warly: some fixes, correction of advanced, wizard and after
-	advanced steps.
-	the user have a better gestion during advanced step, the protocols ftp,
-	sftp, scp, rsync
-	are now include in advanced step..... etc ;-)
-	todo: when checkbuttonbox are clicked for user choice set it to 0 or 1
-	juste after.
-	clean code.
-	new after advanced step, correction of checkbuttons problems & new
-	pixmaps.
-
-2001/11/27  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake.png: updated, cooker style
-
-2001/11/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: avoid problem of array reference badly evaluated.
-
-2001/11/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/mailchangelog.pl: beurk
-	changelog is at linux-mandrake not mandrakesoft
-
-	* install_steps.pm: i810 -> no FB at boot
-
-2001/11/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_gpt.pm (generate_guid): cleanup
-
-	* any.pm (setupBootloader): s/last/return/
-
-2001/11/27  sdupont
-
-	* standalone/drakbackup: advanced step...
-	update.
-	advanced mode ... and ...
-	read and use user list correctly, advanced step user list.
-
-	* pixmaps/hd.png, pixmaps/net.png, pixmaps/cdrom.png: pixmaps for
-	drakbackup.
-
-2001/11/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.rtl8139: add rtl8139 netboot file that works
-
-	* tools/i386/netboot/stage1.rtl8139: add rtl8139 netboot file that works
-	stage1/stage2 of rtl8139 didn't work
-
-2001/11/26  dam's  <damien@mandrakesoft.com>
-
-	* common.pm, my_gtk.pm: new features for new mcc
-
-2001/11/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: getAndSaveAutoInstallFloppy: don't die when output'ing
-	of
-	auto_inst.cfg is not possible
-
-2001/11/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: add $o->{excludedocs} feature
-
-	* Makefile.drakxtools: remove unneeded files (*.bs and .exists)
-
-	* interactive_gtk.pm: cleanup
-
-2001/11/26  sdupont
-
-	* standalone/drakbackup: new gi, advanced step.
-	update.
-	gawk cmds.
-	better use for read and save conf. file now on
-	/etc/draxtools/drakbackup/drakbackup.cfg
-
-	* pixmaps/backup_hd.png, pixmaps/backup_options.png,
-	pixmaps/backup_net.png, pixmaps/backup_time.png: png files for
-	DrakBackup.
-
-2001/11/25  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/fileshareset: first version. for the moment, only nfs.
-
-2001/11/25  sdupont
-
-	* standalone/drakbackup: update of read_conf_file and default mode.
-
-2001/11/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/es.po: updated Spanish and Danish files
-
-2001/11/24  sdupont
-
-	* standalone/drakfont: about...
-
-	* standalone/drakbackup: update
-	update gi ,build of system, user, other, options interfaces.
-	advanced step.
-
-2001/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: package for pcmcia is now called "pcmcia-cs"
-
-	* any.pm, detect_devices.pm: pcmcia: /var/run/stab is nor
-	/var/lib/pcmcia/stab
-	yes it probably doesn't bring anything valuable but it's
-	how life is :-)
-
-2001/11/23  sdupont
-
-	* standalone/drakbackup: radio buttons & information message.
-	change gi interface, include help, about and pixmaps (backup_*.png on
-	standalone/pixmaps directory)
-
-2001/11/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed loading of agpgart module for i810 card.
-
-2001/11/22  sdupont
-
-	* standalone/drakfont: about button & GPL license.
-
-	* standalone/drakbackup: update gi.
-	TODO: separate all the boxes.
-	include wizard and advanced in pixmaps.
-	update
-	notebook gi.
-
-2001/11/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
-	mdk-stage1/init-data/msgboot-blank.img.bz2,
-	mdk-stage1/init-data/msgboot.img.bz2: fixed typo in help.msg
-
-	* Xconfigurator.pm: hack for SiS 640 for laptop.
-
-	* install_any.pm: fixed install_urpmi to build a correct urpmi db.
-
-2001/11/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: i810fb
-	migrate pcmcia in drakx to use in-kernel version (only
-	for 2.4, though --> pcmcia in 2.2 no longer supported)
-
-	* install_steps_interactive.pm, Makefile, c/Makefile.PL: migrate pcmcia in
-	drakx to use in-kernel version (only
-	for 2.4, though --> pcmcia in 2.2 no longer supported)
-
-	* install2.pm: i810fb
-
-	* mdk-stage1/stage1.c, mdk-stage1/pcmcia_/lex_config.c,
-	mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/yacc_config.c,
-	mdk-stage1/pcmcia_/Makefile, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia_/pcmcia.h, mdk-stage1/pcmcia_/ds.h,
-	mdk-stage1/pcmcia_/probe.c: migrate to pcmcia support from kernel,
-	patching untouched imported
-	sources from pcmcia-cs-3.1.29, to ease further updates of vendor
-	code (start from a clean pcmcia_ subdir)
-
-2001/11/21  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (suggestions_mntpoint): if there's no server suggestion, use
-	the simple
-	one, so that 'simple' is the only one required when someone modifies
-	%fsedit::suggestions
-
-2001/11/20  gbeauchesne
-
-	* partition_table.pm: 
-	  - Add isEfi() to isOtherAvailableFS() test so that install doesn't
-	suggest
-	to format /boot/efi by default. That way, we could preserve (shame on
-	us)
-	  EFI boot partition generated by Windows XP 64 bits...
-
-2001/11/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c,
-	mdk-stage1/pcmcia_/bulkmem.h, mdk-stage1/pcmcia_/cardmgr.h,
-	mdk-stage1/pcmcia_/vg468.h, mdk-stage1/pcmcia_/driver_ops.h,
-	mdk-stage1/pcmcia_/i82365.h, mdk-stage1/pcmcia_/cirrus.h,
-	mdk-stage1/pcmcia_/version.h, mdk-stage1/pcmcia_/cistpl.h,
-	mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/cs_types.h,
-	mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/yacc_config.h,
-	mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/tcic.h,
-	mdk-stage1/pcmcia_/probe.c: Initial revision
-	version 3.1.29
-
-2001/11/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_stdio.pm: for po i can't use $ for string interpolation
-
-2001/11/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm, standalone/scannerdrake: Corrected English errors
-
-	* share/po/hu.po, share/po/cs.po: updated pot file
-	updated Czech and Hungarian files
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/af.po:
-	updated pot file
-
-2001/11/19  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (setupBootloader): fix typo
-	(setupBootloader): fix typo
-
-2001/11/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Last correction was wrong, reverted it.
-
-2001/11/19  yduret
-
-	* standalone/scannerdrake: added dynamic support
-
-2001/11/16  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: syntax cleanup
-	  - a little cleanup
-	  - in case there is both scsi and ide hard drives, go to expert
-	questions
-	directly (it would need a semi_auto asking on which drive the bios
-	boots...)
-
-2001/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* keyboard.pm: Added Swedish dvorak keyboard
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/help_xml2pm.pl, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/11/12  sdupont
-
-	* standalone/drakbackup: new backup tool.
-	backend_mode with options.
-	        begin interactive mode.
-
-2001/10/29  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: code correction
-
-2001/10/29  gbeauchesne
-
-	* rescue/list.ia64: 
-	  - Add xfs_repair and efibootmgr
-
-2001/10/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd
-
-	* modules.pm: here too
-	CDCEther looks good, I add it
-
-2001/10/29  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/pcmcia_config.patch: adapt for new pcmcia-cs
-
-2001/10/29  sdupont
-
-	* standalone/drakfont: Copyright (C)
-	correction of warning & code cleaning.
-	the end.... i think...
-	updated
-	uninstall interface & progress bar
-	uninstall interface : lists & progress bar
-	new progress bar update
-	todo: second list
-
-2001/10/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: cleaning
-
-2001/10/27  daouda
-
-	* devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module
-
-	* share/rpmsrate: 
-	  - increase icewm weight.
-
-2001/10/26  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst, standalone/drakfont: progress bar hack
-
-2001/10/26  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools
-
-	* partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end
-	on GPT
-
-2001/10/26  sdupont
-
-	* standalone/drakfont: updated.
-	search correct progress bar mode implementation.
-	updated
-	fix some bugs & interface progress implementation.
-	TODO:
-	progress before backend.
-		search if directory already exist before custom install.
-
-2001/10/25  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakautoinst: simple variables handled, code compression.
-	The new and shiny drakautoinst is coming. P|-|34R
-	The new drakautoinst is coming. P|-|34R
-
-	* pixmaps/mdk_logo.png: additional logo
-
-	* standalone/drakfont: code correction
-
-2001/10/25  sdupont
-
-	* standalone/drakfont: merge differents versions.
-	file sector, list of fonts for advanced install...
-	applications choice, license widget, help widget.
-
-2001/10/24  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: updated
-	updated
-	updated, lot of bugs.
-	updated
-
-	* my_gtk.pm: added set_editable
-
-2001/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h,
-	mdk-stage1/.cvsignore, rescue/install_bootloader,
-	rescue/tree/etc/rc.sysinit, rescue/Makefile,
-	mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile,
-	rescue/tree/etc/issue, rescue/make_rescue_img,
-	mdk-stage1/newt-frontend.c: 
-	  - add a GUI to the rescue
-	  - provide guessmounts with better efficiency and output, go to
-	console, and reboot
-	  - provide install_bootloader which runs lilo from /mnt if it seems
-	safe
-	  - add lsparts to rescue, which prints partitions with detected types
-
-2001/10/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: replace /initrd with /lib/initrd
-	(hds): in case of GPT, allow ext2 to be replaced by any kind of
-	partitions (esp. EFI)
-
-	* partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm,
-	partition_table_raw.pm: add methods first_usable_sector and
-	last_usable_sector
-
-	* fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd
-
-2001/10/24  sdupont
-
-	* standalone/drakfont: scroll
-	`
-	import_status & progress.
-	gi update.
-
-2001/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* services.pm: tagged as translatable some left out strigns
-
-2001/10/23  sdupont
-
-	* standalone/drakfont: gi update
-	doc and progress bar.
-	gui: install from directory
-	gui supported.
-
-2001/10/23  yduret
-
-	* share/po/fr.po: fixed fohtes grammar
-
-2001/10/22  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: speedtouch config : added usa vpi vci
-
-2001/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: oops forgot to umount after "updatemodules"...
-
-2001/10/22  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...)
-
-2001/10/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed connection device setting for "oki4w" driver.
-
-2001/10/19  gbeauchesne
-
-	* partition_table_gpt.pm: 
-	  - Use /dev/random through devices::make() instead of /dev/urandom
-	  - Localize file descriptor
-	  - Capitalize error message if no /dev/random found
-
-	* partition_table.pm: 
-	  - s/Win98 FAT32/FAT32/
-	  - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/
-	  - Add "FAT32" to @important_types for IA-64 & /boot/efi
-
-2001/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: small fix
-
-2001/10/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: OOize can_raw_add
-
-	* partition_table.pm: handle empty $hd->{primary}{raw} (happens with no
-	partitions on ia64)
-	  - raw_add, can_raw_add moved to partition_table_raw
-	  - using raw_removed
-
-	* partition_table_dos.pm: better handling of CHS overflow (mainly for non
-	cylinder-boundary aligned part (like ia64))
-
-	* partition_table_raw.pm (adjustEnd): in case the end is totalsectors,
-	don't adjust since totalsectors / cylinder_size may not be an integer
-	(zero_MBR): defaults to GPT on ia64
-	(raw_add, can_raw_add, raw_removed): created, can now be overloaded in
-	partition_table_*.pm's
-	(get_geometry): keep the total_sectors as given by c::total_sectors,
-	don't try to recompute it based on nb_cylinders (for hds where
-	total_sectors is not a multiple of nb_cylinders)
-
-	* common.pm: cleanup
-
-	* partition_table_gpt.pm: fix ending is last sector, not next one
-	add TODO for partition entry guid
-	  - writing partition table now works
-	  - creating a new partition table now works (except GUIDs generation)
-
-2001/10/18  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: corrected GET_FL and co
-
-2001/10/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now
-	use rgb.txt instead).
-
-2001/10/18  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_gpt.pm: 
-	  - add checksum verif on partition entries
-	  - detect the type of partition since the partition table types seem
-	quite poor
-	read part of GPT partition table working
-
-	* fsedit.pm: 
-	  - add checksum verif on partition entries
-	  - detect the type of partition since the partition table types seem
-	quite poor
-
-	* partition_table.pm: read part of GPT partition table working
-	shorter GPT name
-
-	* detect_devices.pm: safer modprobe ide-floppy
-
-2001/10/18  sdupont
-
-	* standalone/drakfont: change Fontmap ghostscript file.
-	drakfont support now .gsf fonts
-	end of backend......
-	update
-
-2001/10/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: typo
-
-2001/10/17  sdupont
-
-	* standalone/drakfont: implementation of type1 fonts removing.
-	ghostscript, xfs and staroffice tested and supported.
-
-2001/10/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: correct bad level display
-
-	* standalone/interactive_http/Makefile: makes rpmlint happy
-
-2001/10/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: print checks
-
-	* rescue/tree/etc/rc.sysinit: better phrasing
-
-2001/10/16  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl,
-	rescue/list.ppc: typo in update kernel by /me
-	fine-tune sanity_check for ppc
-	move /dev/nvram from list.ppc to devices.pl
-
-2001/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/10/15  yduret
-
-	* scanner.pm: wonderful perl forgotten
-
-2001/10/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also
-	supported
-
-2001/10/12  sdupont
-
-	* standalone/drakfont: support all installations, and support xfs,
-	ghostcript, staroffice.
-	todo aplli: openoffice, gimp, abiword, netscape & other browsers...
-	todo or to see: --strong  ttmkfdir -c ???
-	emd of backend..
-
-2001/10/11  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: multiple card configuration bug corrected.
-	allelluia.
-
-	* network/tools.pm: aded use c
-
-	* standalone/drakfont: code review
-
-2001/10/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again
-
-2001/10/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom
-
-2001/10/11  sdupont
-
-	* docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
-	docs/drakfont/drakfont.dvi: clean directory..
-
-	* docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia,
-	docs/drakfont/dia_srcs/drakfont_uninstall.dia,
-	docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files...
-
-	* standalone/drakfont: improved....
-	improved && implement remove fonts for xfs
-	improved
-	improved
-	optimisation
-	correction of option install --replace
-	dialog of install options
-	correction of install option.
-
-	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg,
-	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg &
-	ps with -kb option
-	clean...2
-
-2001/10/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakfont: typo
-	improved options handling
-
-	* standalone/net_monitor: ergo and features improvments, pipe handling
-	correction
-
-	* network/tools.pm: updated
-
-2001/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language
-
-2001/10/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: normalize the default type entry ("entry")
-
-	* interactive_gtk.pm: fix typo (on clicked_may_quit)
-
-2001/10/10  sdupont
-
-	* standalone/drakfont: option replace for "install from" &
-	windows_import...
-	update install dir
-	better for --install
-	new version of drakfont. in perl langage.
-
-	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux,
-	docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
-	docs/drakfont/drakfont.tex, docs/drakfont/Makefile,
-	docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi,
-	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs
-	drakfont
-
-2001/10/10  yduret
-
-	* standalone/scannerdrake: first apparition on earth..
-
-	* Makefile.config: added scannerdrake
-
-2001/10/09  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: removed trash
-	connection test is now in background, corrects the interface freeze
-	problem
-
-	* pixmaps/net_u.png: new pixmap for draknet/net_monitor
-
-	* standalone/net_monitor, standalone/draknet: connection test is now in
-	background, corrects the interface freeze problem
-
-2001/10/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2001/10/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: fix detecting read-only drives (like memory-sticks)
-
-	* partition_table.pm: make perl_checker happy
-
-	* partition_table_raw.pm: fix detecting read-only drives (like
-	memory-sticks)
-	make perl_checker happy
-
-	* modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care
-	of usb-storage if possible, so that patch on usb floppy works
-
-2001/10/09  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux
-	keycodes on PPC, add additional Apple modelines
-
-	* install_steps_interactive.pm: re-enable PPC bootloader setup
-
-2001/10/08  dam's  <damien@mandrakesoft.com>
-
-	* c/stuff.xs.pm: added FL_GET and FL_SET
-
-2001/10/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as
-	they have been
-	removed from the skip list for stage1.
-
-	* rescue/tree/etc/oem: added silly modification to avoid using more than 7
-	partition for DAC960 (/home
-	and /var are not created in the current state).
-
-2001/10/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: ia64
-
-	* mdk-stage1/Makefile: 8.1 -> cooker
-
-2001/10/08  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm, partition_table.pm: yet a few other ataraid cases
-
-2001/10/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* partition_table_raw.pm, partition_table.pm: updates to accomodate IBM
-	PPC systems with DOS partition table
-
-2001/10/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added (missing) creation of
-	/hd/boot/grub/device.map (needed for
-	CompactSmartArray).
-
-2001/10/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: kdegames : 2 -> 4
-
-2001/10/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fix (work around) parted problem when it refuse to
-	use all disk space for
-	partition.
-	added another psacct log file in touch.
-	fixed typo on scalar reference for psacct bug.
-	updated with 8.1 OEM ProSuite.
-
-	* tools/oem-prepare: updated with 8.1 OEM ProSuite.
-
-2001/10/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po: updated Hungarian file
-
-2001/10/04  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_dos.pm: is little-endian, so use "V" instead of "I"
-
-2001/10/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: synced with oem script.
-	removed 3D games not installed by default.
-
-	* rescue/tree/etc/oem: fixed typo in produced patch.
-	added extension to pro suite CD (added kernel-enterprise to possibly
-	installable
-	and install kernel22).
-	removed 3D games not installed by default.
-	added missing xmms-arts.
-	allow halting.
-
-2001/10/03  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm: yet another ataraid support patch
-
-2001/10/02  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix previous hack.
-	added hack to do "/sbin/depmod -a" for NVIDIA driver.
-
-2001/10/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: new pci-ids.h
-
-	* mdk-stage1/usb-resource/update-usb-ids.pl: better look
-
-	* share/po/fr.po: small fix
-
-	* standalone/drakgw: don't call pkgs_install when no package needs to be
-	installed
-
-2001/10/02  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm: bloody ataraid detection
-
-	* devices.pm: ataraid devices support
-
-2001/10/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT.
-
-	* rescue/tree/etc/oem: added CHARSET support, removed kernel22 and
-	kernel-enterprise from list of
-	package installable in oem mode, added possibility to set language on
-	/etc/oem
-	script invocation.
-
-	* install_steps_interactive.pm: avoid chooseCD on oem install.
-
-	* install_steps_gtk.pm: avoid asking for changing CD on oem install.
-
-	* install_any.pm: use $boot_medium for default medium in oem install,
-	avoid using kernel22 or
-	kernel-enterprise in oem install (space available is too tight on CD oem
-	version).
-
-	* tools/oem-prepare: synced with oem script.
-
-2001/10/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects
-	what's in the marfiles
-
-2001/10/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2001/09/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* docs/README: New adress where to find the kernel BOOT
-
-2001/09/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/09/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/drvinst: don't install usb keyboard drivers more than once
-	try to fix usb keyboards
-
-2001/09/27  kjx
-
-	* share/po/zh_CN.po: translating
-
-2001/09/26  gbeauchesne
-
-	* install_any.pm: 
-	  - Suggest /boot/efi on IA-64 for the first VFAT partition found,
-	instead
-	of /mnt/windows
-
-	* bootloader.pm: 
-	  - bootloader.pm (suggest): don't search for dos (or windows) boot
-	partition
-	on IA-64 since ELILO can only boot Linux.
-	  - bootloader.pm (write_lilo_conf): don't cry if we don't have
-	/boot/boot.b
-	  or boot/message on IA-64.
-
-	* rescue/list.ia64: 
-	  - Add file list for "rescue" disk
-
-	* share/list.ia64, partition_table.pm: 
-	  - partition_table.pm: Add XFS suggestion for IA-64
-	  - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS
-
-2001/09/25  baudens
-
-	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/
-	Remove totally crazy translation.
-	Translators, please use your brain!
-
-2001/09/25  gbeauchesne
-
-	* partition_table.pm: 
-	  - Add ReiserFS and Ext3fs entries for IA-64
-
-2001/09/25  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): cleanup comments
-
-2001/09/25  warly
-
-	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
-	installed for newbie and drakfirsttime does not fail.
-	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
-	does not fail.
-
-2001/09/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: allow non ejectable medium to allow all
-	hdlists on the bootable medium.
-	make current boot medium already selected if multiple hdlist are on this
-	boot medium.
-
-2001/09/25  warly
-
-	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
-	installed for newbie and drakfirsttime does not fail.
-	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
-	does not fail.
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* share/po/fr.po: corrected translation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h,
-	mdk-stage1/disk.c: hd.img now detects partition types... backport from
-	DrakX :-)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount_part): fix for iso loopback mounted
-
-	* share/po/fr.po: fix
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/isdn.pm: type assignation bug fix
-	corrected type assignation
-
-	* share/po/fr.po: corrected bad translation
-
-	* standalone/draknet: corrected type assignation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
-	value)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount_part): fix for iso loopback mounted
-
-	* share/po/fr.po: fix
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: corrected isdn firmware
-
-	* network/adsl.pm, network/isdn.pm: type assignation bug fix
-	corrected type assignation
-
-	* share/po/fr.po: corrected bad translation
-
-	* standalone/draknet: corrected type assignation
-
-2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
-	value)
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix small error merging existing fstab
-
-	* share/po/fr.po: fix
-
-	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
-	for now)
-
-	* diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm: bug fix
-
-	* modules.pm: corrected isdn firmware
-
-	* network/isdn.pm, network/adsl.pm: type assignation bug fix
-	corrected type assignation
-
-	* standalone/draknet: corrected type assignation
-
-	* install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd
-	during install
-
-2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
-	problems reported with it.
-
-	* share/rpmsrate: allow rpm build for non expert who choose development.
-
-	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
-	packages).
-
-2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
-	and Turkish files
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix small error merging existing fstab
-	add "iocharset=" for cdrom
-
-	* install_steps.pm: 
-	  - disable supermount by default
-	  - cleanup nsswitch.conf wins removing
-
-	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
-	for now)
-
-	* diskdrake_interactive.pm: hide the supermount checkbox in standalone
-
-2001/09/24  siegel
-
-	* share/po/de.po: new german version
-
-2001/09/24  warly
-
-	* share/rpmsrate: lower arkeia
-
-2001/09/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/ethernet.pm: bug fix
-
-2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
-	problems reported with it.
-
-	* share/rpmsrate: allow rpm build for non expert who choose development.
-	removed any reference to XFree86-glide-module or Glide_XXX packages.
-
-	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
-	hash keys orders in
-	install_steps_interactive::chooseCD().
-
-	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
-	packages).
-
-2001/09/24  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: add "iocharset=" for cdrom
-
-	* install_steps.pm: 
-	  - disable supermount by default
-	  - cleanup nsswitch.conf wins removing
-
-2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/rpmsrate: removed any reference to XFree86-glide-module or
-	Glide_XXX packages.
-
-	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
-	hash keys orders in
-	install_steps_interactive::chooseCD().
-
-2001/09/24  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: File permission settings during install were not done.
-	Fixed.
-
-2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: misc typo correction
-
-	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
-	* share/rpmsrate: simplify (for the moment)
-	do not force X flag, have it selected for any "Graphical Environment"
-
-	* share/compssUsers, install_any.pm: do not force X flag, have it selected
-	for any "Graphical Environment"
-
-2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode
-
-2001/09/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2001/09/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server
-
-	* fsedit.pm: add magic SWAPSPACE2
-
-	* bootloader.pm: allow bootloader on fat partitions
-
-	* share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag,
-	have it selected for any "Graphical Environment"
-
-2001/09/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version is 8.1
-
-2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated Bosnian file
-
-2001/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, install2.pm: 
-	  - cleanup noatime option setting
-	  - cleanup exec option setting (must noexec => 0 instead of exec => 1)
-
-	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated Bulgarian file
-
-2001/09/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu
-
-2001/09/22  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added support for automatic /dev/... file permissions
-	setting by devfsd.
-	Improved matching of auto-detection results with database entries.
-	Given hint to the user to select the correct model when matching fails.
-
-	* printer.pm: Added support for automatic /dev/... file permissions
-	setting by devfsd.
-
-2001/09/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: avoid detecting plip for live upgrade.
-
-2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some
-	functionality is lost
-	small fix for "vn" keyboard (enable toggle key)
-
-	* share/po/ko.po: updated Korean file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* printerdrake.pm: small fix
-
-2001/09/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: When one changes the driver of a freshly
-	added printer, the cursor was not pointed to the old driver, fixed.
-	Fixed paper size not set according to chosen language during
-	installation.
-
-2001/09/21  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: typo
-
-2001/09/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: reworked medium management.
-	moved com_license to parent package (as code that show the license is
-	now
-	available even for non gtk install).
-
-	* Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade.
-
-	* pkgs.pm, install_any.pm: reworked medium management.
-
-	* detect_devices.pm: avoid detecting plip for live upgrade.
-
-	* install_steps_interactive.pm: avoid keeping testing code.
-	reworked medium management.
-	added code to support changeable cdrom, set a unique copy of license for
-	installing commercial application as package variable (exported).
-
-2001/09/21  gbeauchesne
-
-	* share/po/no.po: remove trailing '\n'
-
-2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hu.po, share/po/no.po: updated pot file
-	updated pot file
-	updated Norwegian and Hungarian files
-	updated pot file
-
-	* help.pm: updated help file
-
-	* share/po/help_xml2pm.pl: updated pot file
-
-	* printerdrake.pm: small fix
-	changed text strings to be more translator friendly
-	(NEVER EVER cut a phrase)
-
-	* share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file
-	updated pot file
-	corrected extra \n
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-	updated pot file
-	updated pot file
-
-	* keyboard.pm: adapted keyboard priority numbers (it is useless to give a
-	multichoice with a
-	value higher than 90)
-
-	* share/po/zh_TW.po: updated pot file
-	updated pot file
-
-2001/09/21  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm: write password in lilo.conf even if it's also done by
-	msec, otherwise lilo will fail with restricted only
-
-	* install_steps.pm: Ensure $o->{superuser}{name} is temporary
-
-	* share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for
-	libsafe and kernel22-secure
-
-2001/09/21  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Added a forgotten "_( ... )".
-
-2001/09/21  warly
-
-	* share/rpmsrate: add gnomemeeting and openmcu
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
-	flag modifications in
-	diskdrake do not escape from diskdrake
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	check bad blocks for xfs and jfs
-
-2001/09/20  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't reapply the conf, if already applied.
-	usefull for dhcp, because the network should be restarted after
-	configured
-
-	* network/adsl.pm: test if microcode is there
-
-	* bootlook.pm: removed blocking die
-
-2001/09/20  fcrozat
-
-	* share/rpmsrate: Add gnome-user-docs to GNOME install
-	Install Mdk eazel engine for gnome
-
-2001/09/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
-	this cause
-	problem in live_upgrade.
-
-	* Xconfigurator.pm: added VideoRam for ET 6x00 card.
-
-	* network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: misc
-
-2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/cs.po: updated Czech file
-
-	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
-	Chinese and Dutch files
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
-	flag modifications in
-	diskdrake do not escape from diskdrake
-
-	* share/rpmsrate: raise i18n fonts
-
-	* fsedit.pm (hds): do a get_major_minor where needed
-
-	* lang.pm: replace xcin by chinput as per Alex request
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	check bad blocks for xfs and jfs
-
-2001/09/20  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed flow of the program for the "recommended" mode of
-	the installation.
-
-2001/09/20  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't reapply the conf, if already applied.
-	usefull for dhcp, because the network should be restarted after
-	configured
-
-	* mouse.pm: text positionning
-
-	* standalone/net_monitor: less gethostbyname
-
-2001/09/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
-	this cause
-	problem in live_upgrade.
-
-	* network/netconnect.pm: tried to fix damien sucking.
-
-2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
-	Chinese and Dutch files
-
-2001/09/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: raise i18n fonts
-	s/telnet-server/telnet-server-krb5/
-
-	* fsedit.pm (hds): do a get_major_minor where needed
-
-	* fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type
-
-	* lang.pm: replace xcin by chinput as per Alex request
-
-	* printerdrake.pm: back out the modif from till as asked by till
-
-2001/09/20  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Make it possible to configure more than 1 printer in a
-	"recommended" mode installation.
-
-2001/09/19  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
-	restart at better place
-
-2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: updated pot file
-	updated help xml
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
-	share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
-	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po:
-	updated help xml
-
-	* share/po/wa.po: updated pot file
-	updated pot file
-
-2001/09/19  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
-	restart at better place
-
-2001/09/19  fcrozat
-
-	* share/rpmsrate: Add mdk-eazel-engine
-
-	* share/po/fr.po: Fix french mistakes
-
-2001/09/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added code to check if package are really installed.
-
-	* Xconfigurator.pm: Rage 128 doesn't like XF3 at all.
-	make only bad card Riva128 for testing XF4.
-	Riva128 is now a bad card.
-
-2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: raklet quoting
-
-	* share/rpmsrate: chromium and tuxracer don't work well with Riva
-
-2001/09/19  Pixel  <pixel@mandrakesoft.com>
-
-	* loopback.pm (create): don't use seek to create big files otherwise you
-	get hole and
-	swapon doesn't like it
-
-	* any.pm (ask_users): default icon "man"
-
-	* lang.pm: compatibility with older $o->{lang} names (for auto_installs)
-
-	* install2.pm: initial support for server install
-	compatibility with older $o->{lang} names (for auto_installs)
-
-	* install_steps_gtk.pm: initial support for server install
-
-	* printerdrake.pm: help perl_checker
-
-	* pkgs.pm, share/rpmsrate, install_any.pm: 
-	  - gmc instead of nautilus for non-latin1 installs
-	  - introduce CHARSET flag and use it
-
-2001/09/19  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Network is now only required (and checked) for remote
-	printers.
-	Several buglets fixed in remote CUPS server dialog.
-
-	* printerdrake.pm: Removed a forgotten debug help line from the code.
-	Fixed typo in dialog text of high/paranoid security.
-	Network is now only required (and checked) for remote printers.
-	Several buglets fixed in remote CUPS server dialog.
-
-2001/09/18  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: don't ask to connect if lan or dhcp
-
-2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: don't create bootdisk by default
-
-	* share/po/fr.po: misc
-
-2001/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
-	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
-	installs
-
-2001/09/18  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch
-
-	* network/netconnect.pm: don't ask to connect if lan or dhcp
-
-	* standalone/drakgw: debug
-
-2001/09/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added X group with SYSTEM.
-	finally work arounded rpm bug by flepied.
-
-	* detect_devices.pm: added back full pci probe for stage2 command lspci.
-	removed full pci probe for stringlist (used for generating report_bug).
-
-	* install_steps_interactive.pm: now finally really fixed printer label in
-	summary dialog.
-	fixed printer description in summary (again).
-	fixed no printer displayed (at least, print Remote CUPS server).
-
-	* commands.pm: make lspci a full pci probe instead of safe pci probe.
-
-2001/09/18  gbeauchesne
-
-	* Xconfigurator.pm: 
-	  - Force XFree 4 on IA-64. No XFree 3.3.X there...
-
-	* tools/ia64/elilo.efi: 
-	  - elilo 3.1
-
-2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install2.pm: don't create bootdisk by default
-
-	* standalone/drakautoinst: have "manual" and "replay" translated
-
-	* share/po/fr.po: misc
-
-2001/09/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files
-
-2001/09/18  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2: 
-	  - remove ISO-8859-5, KOI8-R and KOI8-U
-	  - cleanup packdrake extracting locales
-	  - cleanup/fixes lang.pm
-
-	* install_steps.pm: fix setting kdmrc for latin1
-
-	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)
-
-	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
-	installs
-
-2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/list: updated for rpm 4.0.3.
-
-	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
-	"rpm --root" but need more testing.
-
-	* standalone/XFdrake: removed comment.
-	added support to configure NVIDIA driver if everything is correctly
-	installed.
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, fsedit.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-
-2001/09/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
-	in expert install.
-
-2001/09/17  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: no expert mode needed to choose gateway
-
-2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/list: updated for rpm 4.0.3.
-
-	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
-	"rpm --root" but need more testing.
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-	* Xconfigurator.pm: deactivating bad card test (too).
-
-	* standalone/XFdrake: removed comment.
-	added support to configure NVIDIA driver if everything is correctly
-	installed.
-
-2001/09/17  odin
-
-	* share/po/fr.po: updated fr.po
-
-2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting
-	English language but also euro symbol can choose it.
-	fixed Belgian keyboard
-
-	* share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and
-	Wallon files; corrected error syntax in French file
-
-	* lang.pm: Added choice of "English|Ireland (euro)" so people wanting
-	English language but also euro symbol can choose it.
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-	(mount): do not hand update /etc/mtab for nfs mounts, already done by
-	mount(8)
-	(set_default_options): disable iocharset= and codepage= for supermount
-
-	* partition_table.pm (adjust_main_extended): do not use linux extended
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-	* standalone/drakbug_report: fix
-
-	* fsedit.pm: 
-	  - '--' to separate options for supermount + small workaround (ro and
-	exec before --)
-	  - fix nfs in manualFstab (for auto_installs, reported by David
-	Eastcott)
-
-2001/09/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
-	in expert install.
-	Do not die when "chkconfig" fails (needed for "security_check").
-	Added "-q" option to foomatic-configure (should not get interactive).
-	Added handling of high and paranoid security levels.
-
-	* printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert
-	mode installation.
-	Added handling of high and paranoid security levels.
-
-2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-	* fs.pm (set_default_options): disable iocharset= and codepage= for
-	supermount
-
-2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: add eval around installing lexmark-driver
-	(proprietary).
-
-2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/17  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (pci_probe): log full pci probes
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-
-	* pkgs.pm (read_rpmsrate): fix bug
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug which prevented from printing the option list
-	during install.
-	Fixed bug which prevents printerdrake from running without PDQ
-	installed.
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-	more up to my need ALL flag in compssUsersChoice
-	remove auto-install special case (initialisation of compssUsersChoice)
-
-	* share/rpmsrate: 
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from
-	MDK::Common
-
-2001/09/16  siegel
-
-	* share/po/help_xml2pm.pl: added "systemitem"
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Fixed bug which prevents printerdrake from running without
-	PDQ installed.
-
-2001/09/16  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm, my_gtk.pm: bugfix + cosmetic changes
-
-2001/09/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: updated help.pm file
-
-	* share/po/hu.po: updated Hungarian file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
-	share/po/cs.po, share/po/af.po: updated pot file
-
-2001/09/16  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: "please click on ..." for removable, nfs, smb.
-
-	* fsedit.pm: enhance lvm handling (mostly standalone)
-	  - cleanup & enhance raid mdstat reading (now works with or without
-	devfs mounted)
-	  - chunk size is buggy?
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
-	more up to my need ALL flag in compssUsersChoice
-	remove auto-install special case (initialisation of compssUsersChoice)
-	use new mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* share/rpmsrate: 
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-
-	* verify_c: add special case for c::to_utf8
-
-	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
-	  - cleanup packages appearing twice in rpmsrate
-	  - handle a few case of packages appearing twice
-	  - special case for packages appearing in INSTALL section (flag
-	dropped)
-	  - new special flag ALL for compssUsersChoice
-	use new mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* services.pm, install2.pm, lang.pm, commands.pm, loopback.pm,
-	tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm,
-	network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm,
-	any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new
-	mkdir_p, rm_rf and cp_af from MDK::Common
-
-	* diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly
-	standalone)
-
-	* devices.pm (make): ensure it never returns a non-absolute name
-	(it happened with make("foo") when cwd=/dev and /dev/foo existed)
-
-2001/09/16  siegel
-
-	* share/po/help_xml2pm.pl: added "systemitem"
-	added commet explainig that help.pm is automatically generated.
-
-	* .cvsignore: added .*.sw? for vim users
-
-2001/09/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Added possibility to list command line
-	options for the printers and to give the users help for printing
-	Fixed bug of sometimes appearing the wron dialog after printing test
-	pages
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix options appearing twice in fstab
-
-	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix options appearing twice in fstab
-
-	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  civileme
-
-	* help.pm: Added a dialog in English for users selecting a printing system
-	since no other
-	OS seems to offer such a choice during install.
-
-2001/09/15  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: better connection testing
-
-	* network/tools.pm: more timeout
-
-	* network/adsl.pm: avoid asking 2 times to restart the ethernet card
-
-	* mouse.pm: readded darea realization
-
-2001/09/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: make gtk-themes installed when Gnome is choosen
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/wa.po, share/po/hu.po: updated Hungarian file
-
-2001/09/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.config, tools/Makefile: add aewm-drakx
-
-	* install_steps_gtk.pm: makes cancel on mouse selection works even better
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c,
-	tools/aewm-drakx/README: 
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* any.pm: i18n kdmrc
-	fix user icons choice
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install2.pm: don't warn if modules are missing when testing
-
-	* bootloader.pm: find error in /tmp/.error only if exception is "xxx
-	failed"
-	(write_lilo_conf): ensure linear and lba32 are not both set
-
-	* share/po/fake_c.pl: fix a tricky hack
-
-	* my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no
-	more keyboard focus)
-
-	* c/stuff.pm: i18n kdmrc
-
-	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
-	installs)
-
-	* install_steps_interactive.pm: fix typo
-	find error in /tmp/.error only if exception is "xxx failed"
-	makes cancel on mouse selection works even better
-	fix cancel on mouse choice
-
-	* install_steps.pm: i18n kdmrc
-	enable supermount again
-
-	* network/adsl.pm: correct dams typo
-
-	* fs.pm (write_fstab): fix supermount moving from options to fstype
-
-	* steps.pm: find error in /tmp/.error only if exception is "xxx failed"
-
-	* tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c,
-	tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on
-	new map_request event (fix summary step)
-	  - add and use aewm-drakx
-	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
-	know they don't need keyboard focus
-	  - add some more title to ease debugging (when aewm-drakx is in debug
-	mode)
-
-	* install_steps_auto_install.pm (enteringStep): do not translate in
-	ja|ko|zh
-
-2001/09/15  siegel
-
-	* share/po/de.po: fixed another typo
-	new string
-
-	* printerdrake.pm: added missing _()
-
-	* standalone/draksec: use " instead of ' to get i18n
-
-	* standalone/draknet: fixed missing _()
-
-2001/09/15  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added the PDQ panic button.
-	Removed a superfluous "set_help" line.
-	Save default spooler at program start, fixed typos in comments.
-	Command line commands as "lpr", "lpq", ... are mapped to the correct
-	spooler now.
-	Fixed bug of a waiting message appearing together with a dialog
-	Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type
-	for a printer
-
-	* printer.pm: Added the PDQ panic button.
-	Command line commands as "lpr", "lpq", ... are mapped to the correct
-	spooler now.
-
-	* standalone/printerdrake: Fixed bug of spooler choice via command line
-	options being ignored.
-
-2001/09/15  warly
-
-	* share/rpmsrate: add drakfirsttime
-
-2001/09/14  dam's  <damien@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: make test_pms happy
-
-	* install_any.pm: pptp-adsl instead of pptp-adsl-fr
-
-	* Xconfigurator.pm: no shadow when X test
-
-	* standalone.pm: bugfix
-
-	* my_gtk.pm: no icon if wizard
-	no shadow when X test
-	shadow color
-
-	* bootlook.pm: bugfix
-	iautologin correction
-
-	* mouse.pm: trying to remove draw
-
-	* network/adsl.pm: debug
-	pptp-adsl instead of pptp-adsl-fr
-	bugfix
-	updated speedtouch handling.
-
-2001/09/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: removed S3 ViRGE card from card with problem with
-	frame buffer as it works fine.
-
-	* Xconfigurator.pm: fixed filtering of depth for newt version.
-	depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as
-	depth
-	32 simply doesn't work, even if DRI guide says it works :-) 24 bit works
-	fine
-	for Rage 128.
-	apply restriction on depth available when changing resolution, removed
-	S3 ViRGE
-	from experimental 3D accelerated card list as it really does not work,
-	allow on
-	second pass to change card configuration to choose server (experimental
-	server
-	are still only available to expert), added support for UseCCEFor2D for
-	Rage 128
-	card if a TV card is installed (set to true, else set to false), added
-	support
-	for Rage Mobility M... card that are Rage 128 Mobile chipset, improved
-	error
-	message display to catch only appropriate error message of XFree 4.1.0
-	only,
-	added support for 32 bits for DRI using Matrox card, improved info
-	message with
-	real version of XFree used (anybody) and identifier from PCI probe
-	(expert).
-
-2001/09/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target
-
-	* mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using
-	a reduced form of mkinitrd_helper for mkinitrd (only
-	to provide a dietlibc-enabled static insmod)
-
-2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-
-	* share/po/ko.po: updated Korean file
-
-	* share/po/da.po: updated Danish file
-	updated Danish file
-
-	* share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files
-
-2001/09/14  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm, install_any.pm: when testing for bad drives, if
-	opening for writing fails, remove the drive from the hard drive list
-	(useful for Smartmedia readers)
-
-	* pkgs.pm: update correctSize and invCorrectSize (now linear)
-
-	* share/po/fr.po: fix odin bug (please run msgfmt before committing!)
-
-	* share/rpmsrate: do not install Aurora in russian
-
-2001/09/14  siegel
-
-	* share/po/de.po: updates
-
-	* standalone/drakautoinst: Check exisence of "/root/replay_install.img"
-	before anything else ...
-
-2001/09/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Added "set_help" lines for installer help texts.
-	Raw queue entry added, so cursor not always on "Alps MD-1000" when no
-	printer
-	detected.
-	Resolved conflict.
-	Now it is checked whether the network is configured and running.
-	draknet is called when the network is not configured.
-	It is checked whether the spooler is automatically started at boot.
-	The oki4daemon is started when needed.
-	Lexmarks inkjet drivers are fully integrated.
-	The permissions of the device files are set so that normal users can
-	print with PDQ.
-
-	* standalone/printerdrake: Fixed spooler selection by command line.
-
-	* printer.pm: Raw queue entry added, so cursor not always on "Alps
-	MD-1000" when no printer
-	detected.
-	Made network checking working on non-english systems.
-	Now it is checked whether the network is configured and running.
-	draknet is called when the network is not configured.
-	It is checked whether the spooler is automatically started at boot.
-	The oki4daemon is started when needed.
-	Lexmarks inkjet drivers are fully integrated.
-	The permissions of the device files are set so that normal users can
-	print with PDQ.
-
-2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
-	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13  odin
-
-	* share/po/fr.po: updated up to 6648
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: new migration feature for creation of
-	partitions on existing mount points
-
-	* diskdrake.pm: 
-	  - add back shortcuts
-	  - red colored buttons in nfs/smb/removable
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated
-
-	* my_gtk.pm: updated
-	addde /usr/share/icons in path for pixmaps search
-	shadow reduced to 5 pixels
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added mt-st to ARCHIVING
-
-2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
-	trouble to XFree86 4.1.0.
-
-	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
-	fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13  odin
-
-	* share/po/fr.po: updated up to 6648
-	updated fr.po
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add krozat
-
-	* any.pm (inspect): use a safer dir when standalone
-
-	* install_steps.pm: extend disable KDE GreetString to
-	ja|ko|zh|ru|th|vi|be|bg
-	do not translate kdm GreetString in ja|ko|zh (what about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-	* diskdrake_interactive.pm: new migration feature for creation of
-	partitions on existing mount points
-
-	* diskdrake.pm: 
-	  - add back shortcuts
-	  - red colored buttons in nfs/smb/removable
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install_steps_interactive.pm (selectKeyboard): don't prompt in newbie
-	mode if >=90, not >90
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: shadow reduced to 5 pixels
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
-	fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-
-	* services.pm: updated repartition of services into category, network
-	category are commented so
-	that service will to "Other" one.
-
-	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
-	trouble to XFree86 4.1.0.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: filtered the list from lang2keyboard to display only valid
-	keyboards
-
-	* c/stuff.xs.pm: add partition adding on the fly trick
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
-	about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/13  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet, network/isdn.pm: isdn timeout works now.
-
-2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* lang.pm: fixed bad $localedir in load_mo().
-
-	* g_auto_install: updated so that this scripts is running again.
-
-	* install2.pm: do not output error message for bad kernel if using
-	--g_auto_install.
-
-	* install_steps_interactive.pm: fixed Printer name reporting for a
-	specific printer.
-
-	* install_any.pm: updates 3D category according Matrox G550 and Radeon
-	card.
-
-	* services.pm: updated repartition of services into category, network
-	category are commented so
-	that service will to "Other" one.
-
-	* live_install2: updated #! as ../perl is not used.
-
-	* my_gtk.pm: synced with --g_auto_install mode.
-
-	* install_steps.pm: synced with Xconfigurator bad_card class of video card
-	to avoid using frame
-	buffer, added ET6\d00 style card which seems to have problem.
-
-	* Xconfigurator.pm: fix for Matrox G550 support, now add DRI support.
-	disable any question to user about XF3 if he choose a dual head
-	configuration.
-	disable DRI if Xinerama has been chosen.
-	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
-	Tseng ET6\d00.
-	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
-	synced with --g_auto_install mode.
-	disable testing with all SiS card except SiS 630 under XF4.
-
-2001/09/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po,
-	share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po,
-	share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
-	share/po/id.po: updated pot file
-
-2001/09/13  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm: filtered the list from lang2keyboard to display only valid
-	keyboards
-
-	* c/stuff.xs.pm: add partition adding on the fly trick
-
-	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
-	the fly without rebooting on a device with some already mounted
-	partitions)
-
-	* install2.pm (selectKeyboard): remove code causing
-	install_steps::selectKeyboard to be skipped
-
-	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
-	about ru?)
-	in kdmrc GreetString, magic string HOSTNAME replaced by %n
-
-2001/09/12  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: typo
-	new color for shadow
-	corrected shadow handling
-	no shadow if liveupdate
-
-	* share/help.png: new help
-
-	* mouse.pm: removed debug code
-
-	* network/tools.pm, network/netconnect.pm, network/ethernet.pm,
-	network/isdn.pm, network/adsl.pm, network/modem.pm: new default
-	connection handling
-
-	* standalone.pm: added wait message while installing package
-
-2001/09/12  daouda
-
-	* standalone/drakbug_report: add Mandrake release section
-
-2001/09/12  fcrozat
-
-	* share/rpmsrate: Fix gnome install
-
-2001/09/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: removed obsolete --nocpi flag for install2.
-	avoid probing usb device (for mouse) if --noauto is given.
-
-	* install_steps.pm: disabled frame buffer for most of the SiS display card
-	except SiS 630.
-
-	* Xconfigurator.pm: added MGA G550 as always having two head.
-
-	* live_install2: fix when switching perl version.
-
-	* live_install: use system perl instead.
-
-2001/09/12  gbeauchesne
-
-	* share/list.ia64, share/list, share/list.i386: 
-	  - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to...
-	  - list.i386: ... Here.
-	  - list.ia64: Updates.
-
-2001/09/12  odin
-
-	* share/po/fr.po: updated fr.po
-
-2001/09/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po,
-	share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po,
-	share/po/it.po, share/po/af.po: updated pot file
-
-	* help.pm: new version with [ and ]
-
-	* lang.pm: commented out utf-8 russian locale, for now
-
-2001/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/lsnetdrake: fix typo
-	added wonderful lsnetdrake
-
-	* modules.pm, install2.pm: display error when the kernel mismatch the
-	modules
-
-	* docs/README: explain how to get the boot kernels
-
-	* install_steps_gtk.pm (choosePackagesTree): translate the categories
-
-	* standalone/drakbug_report: cleanup
-
-	* bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels
-	(suggest): no "quiet" boot for smp and enterprise kernels
-	allow grub even for more than 800MB
-
-	* Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake
-
-2001/09/12  siegel
-
-	* share/po/de.po: new & shiny verion
-
-	* share/po/help_xml2pm.pl: fixed silly error
-	added keycap patch
-
-2001/09/12  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: corrected shadow handling
-	no shadow if liveupdate
-	table undef corrected
-	removed shadows if standalone
-
-	* standalone/drakgw, standalone/draknet: corrected wizard mode in newt
-	mode
-
-	* mouse.pm: removed debug code
-
-	* network/netconnect.pm: corrected splash in non X mode
-
-2001/09/12  daouda
-
-	* standalone/drakbug_report: add Mandrake release section
-
-2001/09/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install2: fix when switching perl version.
-
-	* live_install: use system perl instead.
-
-2001/09/12  kjx
-
-	* share/po/zh_CN.po: revison
-
-2001/09/12  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README: explain how to get the boot kernels
-
-	* install_steps_gtk.pm (choosePackagesTree): translate the categories
-
-	* standalone/drakbug_report: cleanup
-
-	* bootloader.pm: allow grub even for more than 800MB
-
-2001/09/11  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: removed useless print
-	don't detect ethx if no autodetection.
-	implement smarter checkboxes
-
-	* mouse.pm: test updated
-	mouse test worked
-
-	* network/ethernet.pm: don't detect ethx if no autodetection.
-	implement smarter checkboxes
-
-	* pixmaps/arrow_down.xpm: pixmap corrected
-	new arrows
-
-	* pixmaps/arrow_up.xpm: new arrows
-
-	* share/rpmsrate: added ibod
-	added isdn-light
-
-	* interactive_gtk.pm, my_gtk.pm: fear the shaped windows...
-
-2001/09/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* help.pm: small fix
-
-	* share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po,
-	share/po/it.po: updated Hungarian file;
-	updated pot file
-
-2001/09/11  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile (tar-drakxtools): remove the building of "help" for drakxtools
-
-	* bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not
-	a primary
-	partition (otherwise lilo dies)
-
-2001/09/10  dam's  <damien@mandrakesoft.com>
-
-	* network/modem.pm, network/ethernet.pm: detect_devices
-
-	* standalone/net_monitor, network/network.pm: removed timeout:1 in
-	resolv.conf, modified timeout scanning in draknet/net_monitor
-
-	* install_gtk.pm, install_steps_gtk.pm: mouse test moved
-
-	* mouse.pm: test_mouse moved
-
-	* my_gtk.pm: added border
-	window decorations
-	no set_events if embedded
-
-	* standalone/draknet: removed timeout:1 in resolv.conf, modified timeout
-	scanning in draknet/net_monitor
-	debug
-
-	* standalone/mousedrake: don't fork the code
-
-	* network/adsl.pm: debug
-	debug
-
-2001/09/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated g_auto_install() for newer printerdrake
-	interface.
-
-	* modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into
-	detect_devices::pcmcia_probe.
-
-	* mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for
-	blank.img floppy image.
-
-	* install_steps_interactive.pm, mouse.pm: added hid type usb mouse
-	support.
-
-	* Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz,
-	1024x480 but not automatically used).
-
-2001/09/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: plop
-	some adjustements in Games section
-
-2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/de.po: updated German file; added choice of
-	various quotes in help_xml2pm.pl
-	Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/zh_TW.po: updated Chinese file
-
-	* share/po/ko.po: updated Korean file
-	Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated pot file;
-	removed translations that are too low on percentage.
-
-	* share/po/help_xml2pm.pl: updated German file; added choice of various
-	quotes in help_xml2pm.pl
-
-2001/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: 
-	  - make diskdrake work in embedded mode
-	  - $my_gtk::pop_it used where it should
-
-	* detect_devices.pm: fix ide-scsi appearing 2 times when standalone
-	because both in /proc/ide
-	and /proc/scsi/scsi
-
-	* share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars
-	  - skip directories missing drakx-help.xml
-	  - convert to the right charset (taken from $lang.po)
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-	* diskdrake.pm: 
-	  - make diskdrake work in embedded mode
-	  - $my_gtk::pop_it used where it should
-	fix Umount and Mount when i18ned for nfs/smb
-	don't display Wizard if wizard done before DrakX
-
-	* share/po/Makefile, share/po/.cvsignore: 
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-2001/09/10  siegel
-
-	* share/po/de.po: updates
-
-2001/09/10  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue
-	modified to not get
-	interactive when overwriting a file.
-	Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be
-	able to
-	  identify which PPD from /usr/share/cups/model was used (for
-	auto-install).
-
-2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated pot file;
-	removed translations that are too low on percentage.
-
-2001/09/10  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl: 
-	  - rename help-*.po by help-*.pot
-	  - fix typo in script removing $lang.po translations to favour
-	help-*.pot
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: probeall handling
-
-2001/09/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue
-
-2001/09/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-	* share/po/sv.po: updated Swedish file
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (ejectCdrom): fix D state on exit
-
-	* diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm: 
-	  - "Wizard" and "More" are back
-	  - allow "Use for loopback" when there is already a loopback
-	  - set the options on newly created partitions
-	  - recompute_loopbacks called after modification of loopbacks, no more
-	before reading
-	  - restrict the lenght of the lines in partition description
-	  - make loopback work
-
-	* interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm:
-	clicked_may_quit used in place of clicked+exception to work-around
-	perl-GTK bug (?)
-
-	* share/po/i18n_compssUsers: ensure we're not adding a string already
-	there (otherwise msgmerge yells)
-
-	* share/po/help_xml2pm.pl, share/po/.cvsignore: xml help
-	handling/enhancing for multi-langs
-
-	* modules.pm: probeall handling
-	(write_conf): switch to "probeall scsi_hostadapter ..."
-
-	* share/po/Makefile: xml help handling/enhancing for multi-langs
-	xml help handling/enhancing for multi-langs
-
-	* partition_table.pm (get_normal_parts_and_holes): remove only small
-	holes, not small partitions
-
-	* fs.pm (set_default_options): remove iocharset=... for nfs (why was it
-	there?)
-
-2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix some ortograf
-
-	* share/rpmsrate: lvm not installed for everyone ?!
-
-2001/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: force exitInstall to be non automatic
-
-	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
-	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
-	installs work again
-
-2001/09/09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): switch to "probeall scsi_hostadapter ..."
-
-2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix some ortograf
-
-	* share/rpmsrate: lvm not installed for everyone ?!
-
-	* modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't
-	flush it when
-	it didn't decide to put any modules in it (to leave user's modules) (2)
-	it
-	doesn't remove the last line (3) it uses stronger regexp'es for
-	substitution to not remove modules that have names made of other modules
-	names subsets
-
-2001/09/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/zh_TW.po: updated Chinese file
-
-2001/09/08  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm: fix font in iso-15
-
-	* modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..."
-
-	* interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak
-	with nested subs)
-
-	* share/diskdrake.rc: change name
-
-	* install_steps_auto_install.pm: force exitInstall to be non automatic
-
-	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
-	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
-	installs work again
-
-	* timezone.pm: Asia/Taipei for Traditional Chinese
-
-	* detect_devices.pm: remove debug code
-
-2001/09/07  daouda
-
-	* share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07  fcrozat
-
-	* share/rpmsrate: Add grio500
-
-2001/09/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
-	result).
-	fix all Matrox card used with XF4 which really does not like X in frame
-	buffer
-	(unable to restore frame buffer of DrakX).
-
-2001/09/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386,
-	rescue/tree/etc/rc.sysinit: ext3, xfs, jfs
-
-	* bootloader.pm: use -v for mkinitrd
-
-	* share/po/fr.po: "reseaux" and plurals
-	misc
-
-	* share/rpmsrate: some work on games
-
-2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files
-
-2001/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: cleanup po
-
-	* install_steps.pm: s|kdmrc|kdm/kdmrc|
-
-	* lang.pm: fix load_mo call
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
-	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
-	disable_forced_fsck called for ext3 formatting
-	(Type): disable fsck when migrated ext2->ext3
-
-	* fs.pm: disable_forced_fsck called for ext3 formatting
-
-2001/09/07  siegel
-
-	* share/po/de.po: updates
-
-2001/09/07  Till Kamppeter <till@mandrakesoft.com>
-
-	* standalone/printerdrake, printer.pm, printerdrake.pm: Data structure
-	fitted for auto-install to work
-	Optimized program to be much faster
-	Many more waiting messages
-	Many bugfixes
-
-2001/09/07  daouda
-
-	* share/rpmsrate: add mdkonline (X 4)
-
-2001/09/07  fcrozat
-
-	* share/rpmsrate: Add grio500
-
-2001/09/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
-	result).
-	fix all Matrox card used with XF4 which really does not like X in frame
-	buffer
-	(unable to restore frame buffer of DrakX).
-
-2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* any.pm: Changed simple quote to double quote for a translatable string
-	(otherwise
-	it isn't seen)
-
-	* share/po/es.po: updated Spanish file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po,
-	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	updated pot file
-
-	* share/po/sv.po: updated Swedish file
-	updated pot file
-
-2001/09/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: s|kdmrc|kdm/kdmrc|
-	remove the "konsole and gnome-terminal are lamers in exotic languages,
-	link them to something better"
-
-	* bootloader.pm (write_lilo_conf): fix typo
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help
-
-	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
-	disable_forced_fsck called for ext3 formatting
-	(Type): disable fsck when migrated ext2->ext3
-
-	* install_any.pm, keyboard.pm: cleanup
-
-	* partition_table.pm, share/list: add xfs
-
-	* fs.pm: disable_forced_fsck called for ext3 formatting
-
-	* share/rpmsrate: add jfsprogs
-
-2001/09/07  siegel
-
-	* share/po/de.po: updates
-	updates/fixes
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-
-2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
-	XFree 4.1.0 is not bad, and
-	all NVIDIA card are no more considered bad.
-
-	* pkgs.pm: fixed retry of package 3 times everytime even if first install
-	succeeded, now
-	after first successfull install, go to next package to install.
-
-	* install_steps.pm: removed some cards for allowing frame buffer.
-
-2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: works now ;p
-
-2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX
-	corrected lang.pm to have coherence in locale usage (it was the source
-	of much of the problems); changed keyboard.pm to ignore charset encoding
-	in locale name for locale -> keyboard guessing.
-	removed unused gconv modules, converted az.po to utf-8 (as it was the
-	only
-	remaining az.po on Earth still in a non standard encoding)
-
-	* share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2,
-	keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in
-	locale usage (it was the source
-	of much of the problems); changed keyboard.pm to ignore charset encoding
-	in locale name for locale -> keyboard guessing.
-	removed unused gconv modules, converted az.po to utf-8 (as it was the
-	only
-	remaining az.po on Earth still in a non standard encoding)
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: fix keyboard config + some cleanup
-	cleanup (use /proc/self instead of /proc/$$)
-
-	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
-	keyboard config + some cleanup
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-
-2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
-	XFree 4.1.0 is not bad, and
-	all NVIDIA card are no more considered bad.
-	avoid using @resolutions_laptop, now use only @resolutions, this means
-	1400x1050
-	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
-	(so
-	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
-	file).
-
-	* install_steps.pm: removed some cards for allowing frame buffer.
-	fix log when configuring printer queue.
-
-	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
-	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
-	and
-	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
-	* pkgs.pm: fixed retry of package 3 times everytime even if first install
-	succeeded, now
-	after first successfull install, go to next package to install.
-
-	* install_any.pm: update printer data for g_auto_install.
-
-2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: works now ;p
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: fix keyboard config + some cleanup
-	cleanup (use /proc/self instead of /proc/$$)
-
-	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
-	keyboard config + some cleanup
-
-	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
-	type
-
-2001/09/06  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm: corrected speedtouch
-
-	* install_gtk.pm: removed comments
-	new mouse test
-
-2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: revert previous patch, this is not usable with current rpm as
-	it complains if
-	one the file has a modified MD5SUM against the header describing it in
-	the
-	hdlist, so this is most of the time useless.
-	guess filename if the file is not found (for an rpm file during
-	installation),
-	so try with release incremented in such case (good for Cooker user or
-	local
-	tester using network installation).
-
-	* install_steps.pm: fix log when configuring printer queue.
-
-	* Xconfigurator.pm: avoid using @resolutions_laptop, now use only
-	@resolutions, this means 1400x1050
-	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
-	(so
-	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
-	file).
-
-	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
-	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
-	and
-	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).
-
-	* install_any.pm: update printer data for g_auto_install.
-
-	* printerdrake.pm: revert previous commit.
-	added a missing ifup lo, on some case (auto_install) it fails.
-
-	* printer.pm: start ifup lo before starting service cups.
-
-2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-	* share/po/ga.po, share/po/no.po: updated Irish and Norwegian files
-
-2001/09/06  Pixel  <pixel@mandrakesoft.com>
-
-	* share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend,
-	fix the use
-
-	* diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names
-
-	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
-	type
-
-	* timezone.pm (ntp_server): fix (step-tickers was empty)
-
-2001/09/05  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor, standalone/draknet: corrected opeions
-
-	* standalone/mousedrake: typo
-	updated
-
-	* network/tools.pm: corrected initcript
-
-	* pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm,
-	pixmaps/mouse_left.xpm: new pixmaps
-
-2001/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/diskdrake: fix function called
-
-2001/09/05  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Set default printer (all spoolers), manual
-	config (CUPS), bugfixes, clean-ups.
-
-2001/09/05  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
-	pixmaps/wiz_drakgw.png: new icons
-
-	* share/themes-mdk.rc: updated theme
-
-	* standalone/draknet: interface display corrected
-
-	* share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons
-
-	* install_gtk.pm: 2 sec without sensitives buttons
-
-	* network/netconnect.pm: only if standalone
-
-	* pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png,
-	pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png,
-	pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png,
-	pixmaps/bootdisk.png: new pixmaps
-
-2001/09/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed display of XFdrake test image (fcrozat).
-
-	* install_steps.pm: fixed typo preventing removable devices to be seen in
-	/etc/fstab.
-	fixed configurePrinter (used for auto_install).
-
-	* install_steps_interactive.pm: avoid asking when using existing partition
-	for magic partition with a real
-	mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so
-	partition is
-	not unmountable).
-
-	* bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown
-	lilo.
-
-	* fs.pm: fix bad creation of /mnt/hd for an hd installation without
-	ramdisk.
-	support setting /tmp/hdimage in /etc/fstab even if memory is low (not
-	using ramdisk).
-
-	* install_any.pm: filtering $o->{printer} for g_auto_install().
-	allow installing urpmi on hd install even if low memory (so not using
-	ramdisk).
-
-	* diskdrake_interactive.pm: Do not use for loopback of magic partition
-	(/tmp/hdimage).
-
-2001/09/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1
-
-2001/09/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated Bosnian file
-
-	* share/po/uk.po: updated Ukrainian file
-
-2001/09/05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: use EISA_ID in more cases to have the name
-	non-case dependent EISA comparison
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* Xconfig.pm: fix typos
-	non-case dependent EISA comparison
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* modules.pm: favor tmscsim over AM53C974
-
-	* tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info
-	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
-	there, but not the [hv]syncrange
-
-	* standalone/diskdrake: fix function called
-
-2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	Updated Danish file; updated pot file
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix typo
-
-2001/09/04  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Fitted to the new Foomatic version.
-	Fixed bug of spooler change only working when language is English.
-
-2001/09/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix bad vga= which go for some install.
-
-2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* network/netconnect.pm: small english change
-
-	* mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff
-
-	* share/rpmsrate: tetex-doc
-
-	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(
-
-2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
-	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
-	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
-	Updated Danish file; updated pot file
-
-	* share/po/ja.po: updated Japanese file
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): use "above" instead of "post-install"
-
-	* partition_table.pm: re-add JFS
-
-	* fsedit.pm, common.pm, bootloader.pm: 
-	  - don't expand symlinks in grub's menu.lst
-	  - better use of /proc/partitions verification
-
-	* detect_devices.pm (getCompaqSmartArray): add yet another location for
-	cpqarray location
-
-	* fs.pm: fix typo
-	mount ext3 as ext2 during install for speed up
-
-2001/09/04  fcrozat
-
-	* share/rpmsrate: Add plugins for KDE and Mozilla
-
-2001/09/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fix bad vga= which go for some install.
-
-	* pkgs.pm: cleanup to avoid invalid file error.
-
-2001/09/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): use "above" instead of "post-install"
-
-	* fs.pm: mount ext3 as ext2 during install for speed up
-
-	* partition_table.pm: re-add JFS
-
-	* fsedit.pm, common.pm, bootloader.pm: 
-	  - don't expand symlinks in grub's menu.lst
-	  - better use of /proc/partitions verification
-
-	* detect_devices.pm (getCompaqSmartArray): add yet another location for
-	cpqarray location
-
-2001/09/04  yduret
-
-	* my_gtk.pm: emebedded mode fix
-
-	* interactive_gtk.pm, diskdrake.pm: embedded mode fix
-
-2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzy-ise a few things, translate a few things
-
-2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated Korean file
-
-2001/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: fix for lvm (non-)creation of devices
-
-2001/09/03  yduret
-
-	* my_gtk.pm, diskdrake.pm: fix Embedded mode
-
-2001/09/03  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: added timeout in resolv.conf
-
-2001/09/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: updated to use new urpmi.cfg format for install_urpmi,
-	make sure the directory
-	is not given for ftp and http install ($dir).
-
-	* Xconfigurator_consts.pm: added 1920x1440 and 2048x1536.
-
-	* Xconfig.pm: make sure a staling Mouse2 is not present unless it really
-	physically exists.
-
-2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add axnet_cs to pcmcia category
-
-	* mdk-stage1/probing.c: change `scd' with `sr'
-
-2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-	* share/po/ko.po: updated Korean file
-
-2001/09/03  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm (ntp_server): also set /etc/ntp/step-tickers
-
-	* fsedit.pm, devices.pm: fix mtab reading and pseudo-device use
-
-	* interactive_gtk.pm: better sizing for combo boxes
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
-	to propose already formatted
-	fat partitions
-
-	* share/list: those files disappeared ??
-
-	* fs.pm: fix for lvm (non-)creation of devices
-	(set_default_options): created
-	fix mtab reading and pseudo-device use
-
-	* diskdrake.pm (smb_create, nfs_create): make the "New" button work
-	(raw_hd_mount_point): fix checking the same mount point
-	(try_): fix error displaying
-
-	* partition_table.pm: fix switching to 0x85 extended when
-	remove_empty_extended is called
-
-2001/09/03  yduret
-
-	* standalone/net_monitor: sync with new logdrake command line options
-
-2001/09/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bs.po: updated bosnian file
-	Added Bosnian file
-
-2001/09/01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid deleting package from %packages in install() when closing
-	fd associated,
-	if the open is called again (?), it will cause an invalid file (seems to
-	happens
-	on some invalid file).
-
-2001/08/31  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draksec: corrected yesno interpretation
-	libsafe modification
-
-	* network/netconnect.pm: corrected profil recording for modem
-
-	* standalone/net_monitor: correted typo
-
-	* network/ethernet.pm: corrected zero return when cable configuring
-
-	* any.pm: corrected autologin : no uc anymore
-
-	* network/modem.pm: added domainname2 setting
-
-	* share/logo-mandrake.png: new logo
-
-2001/08/31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added missing AlwaysCore line for second mouse for
-	XF3.
-
-	* mouse.pm: added missing AlwaysCore line for second mouse in XF3.
-
-	* standalone.pm: add option --allow-medium-change to force asking question
-	even if --auto is
-	given on command line of urpmi, for installing package so that a dialog
-	appears.
-
-2001/08/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES
-	section
-	have "numlock" in INSTALL because it's the only package which goes to
-	CD#2
-	when you unselect all groups, so having it here will allow not changing
-	CD
-	with this kind of small install
-
-2001/08/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian
-	and Spanish files
-
-	* share/po/sv.po: updated Swedish file
-	updated Ukrainian and Spanish files
-
-2001/08/31  siegel
-
-	* share/help_sav.png: not used any more
-
-	* share/po/de.po: updates
-
-	* share/logo-mandrake2.png, share/logo-mandrake_trans.png,
-	share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old
-	versions => not in use any more
-
-2001/08/31  yduret
-
-	* bootlook.pm: updated code
-
-2001/08/30  dam's  <damien@mandrakesoft.com>
-
-	* network/tools.pm: nicer display
-
-	* standalone/draknet: added use common.pm (can be usefull, eh?)
-
-	* network/network.pm: silently /sbin/ip
-	track_network_id only if laptop
-
-2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: Updated Danishfile
-	updated pot file (I had lost the group descriptions, sorry, they are
-	back now)
-	moved chinese files to charset independent names
-
-	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
-	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
-	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I
-	had lost the group descriptions, sorry, they are back now)
-	moved chinese files to charset independent names
-
-2001/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (read): it works now
-
-	* help.pm: fixed (was utf8)
-
-	* install_steps_gtk.pm (new): call interactive_gtk::new
-
-	* install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial
-	mouse) before service choice
-
-	* pkgs.pm (naughtyServers): update for 8.1
-
-2001/08/30  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: corrected icon display
-
-	* my_gtk.pm: new wizard
-
-	* interactive_gtk.pm: corrected wizard mode display height/width
-
-	* standalone/draknet: added draknet client installation
-
-	* network/network.pm: track_network_id only if laptop
-	dhcp package installation
-
-	* pixmaps/wiz_default_left.png: new logo
-
-2001/08/30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: make sure to update all symlink according to any mouse (max 2)
-	probed.
-	fix previous fixes on mouse::write_conf
-
-	* standalone/mousedrake: fix previous fix (typo).
-	keep mouse specific paramater if user does not change its mouse.
-	make sure --auto is not interactive on some part.
-	use default value for port device if a serial mouse.
-
-	* printer.pm: fixed foomatic failed (no lo up since ifup lo don't run)
-
-	* Makefile: ugly to make sure standalone/pixmaps is not here when building
-	tar-drakxtools.
-
-	* Xconfig.pm: when reading existing configuration for mouse, update
-	type|name for second mouse too.
-	make sure default to set 3 for nbuttons for getinfoFromXF86Config for
-	second
-	mouse if this mouse has 3 buttons.
-
-	* Xconfigurator.pm: for single heads mode, no screen id should be set in
-	file (or XFree is going
-	mad, but he is right, no ?)
-
-	* install_any.pm: if a medium is refused, get rid of it definitively until
-	it is accepted again.
-
-2001/08/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: have a wait_message during installation of
-	bootloader
-
-	* mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA
-	Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28
-
-2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese,
-	Spanish and Vietnamese files
-
-2001/08/30  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: allow LVM on RAID
-
-	* help.pm: fixed (was utf8)
-
-	* any.pm: cleanup
-
-	* pkgs.pm (naughtyServers): update for 8.1
-
-	* lang.pm (read): it works now
-
-	* fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if
-	removable
-	media
-
-	* share/po/Makefile: fix utf8 translation of xml file
-
-	* interactive_gtk.pm: fix&cleanup window size
-
-	* tools/Makefile: cleanup unneeded stuff
-
-2001/08/30  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/30  warly
-
-	* share/rpmsrate: add koffice-i18n diald vlan-utils
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix language selection
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
-	in /)
-
-2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed if undef encountered in depslist when installing package
-	(traversing
-	depslist as $depOrder).
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix language selection
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* install_steps_gtk.pm (installPackages): have Ok button by default for
-	asking for changing CD
-
-	* bootloader.pm (mkbootdisk): cleanup
-
-	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
-	in /)
-
-	* devices.pm: remove fd0H1440 and fd1H1440
-
-	* modules.pm: remove "msdos"
-
-2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
-	already defined.
-
-	* standalone/mousedrake: try to merge already existing mouse configuration
-	with what has been probed,
-	change if mouse is really changed as probe is incomplete.
-
-	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-	* pkgs.pm: fixed if undef encountered in depslist when installing package
-	(traversing
-	depslist as $depOrder).
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, standalone/drakautoinst: quit_global
-
-	* share/po/fr.po: minor fix
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* c.pm: better error message when function c::foo() is missing
-
-	* keyboard.pm (loadkeys_files): fixed
-
-	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
-	Makefile.config: add localedrake (not tested)
-
-	* rescue/make_rescue_img: make it work (do not have the dev in /)
-	cleanup, speedup, use mknod for devices
-
-	* install_steps_gtk.pm (installPackages): have Ok button by default for
-	asking for changing CD
-
-	* rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices
-
-	* bootloader.pm (mkbootdisk): cleanup
-
-	* rescue/dirs: make it work (do not have the dev in /)
-
-	* devices.pm: remove fd0H1440 and fd1H1440
-
-	* modules.pm: remove "msdos"
-
-2001/08/29  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch
-	configuration
-
-2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
-	already defined.
-
-	* install_steps.pm: add support for mandatory frame buffer support (SiS
-	630) need them for XF3 to
-	work properly, XF4 does work with it nicely.
-
-	* Xconfigurator.pm: make sure Port entry for wacom is placed first.
-
-	* standalone/mousedrake: try to merge already existing mouse configuration
-	with what has been probed,
-	change if mouse is really changed as probe is incomplete.
-
-	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.
-
-2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: games
-
-2001/08/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file
-
-2001/08/29  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle
-	symlinks device and devfs devices
-
-	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
-	Makefile.config: add localedrake (not tested)
-
-	* install_steps.pm: no need to have devfs=nomount anymore in root raid
-	do not modify fstab options in upgrade
-
-	* keyboard.pm (loadkeys_files): fixed
-	fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup
-
-	* diskdrake_interactive.pm: try to better handle symlinks device and devfs
-	devices
-	(main): fix
-	(Create): fix typo causing primaryOrExtended to be ignored
-
-	* rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup,
-	speedup, use mknod for devices
-
-	* c/stuff.xs.pm, detect_devices.pm: better floppy detection/info
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm, install2.pm: corrected icon handling
-
-	* services.pm: added cupslpd in printing section
-
-2001/08/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile.config: really fix typo...
-	fixed typo.
-
-2001/08/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: updated Czech file
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove the temporary file /tmp/autoinst.img
-
-	* install_steps.pm, install_steps_interactive.pm: propose to format / and
-	/usr even if isFormatted. More generally do not trust isFormatted to
-	show which partitions to format
-
-2001/08/28  siegel
-
-	* ChangeLog, keyboard.pm: 
-	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
-	if no laptop is detected (= give users the chance to know about the
-	existence of this variable).
-
-2001/08/28  yduret
-
-	* standalone/diskdrake: embedded mode nicer
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm, install2.pm: corrected icon handling
-
-2001/08/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added /sbin/e2fsck
-
-	* share/aliases: added fsck.ext2 -> e2fsck (now in list file)
-	removed e2fsck.shared as e2fsprogs now provide a shared version instead
-	of a
-	static one.
-
-	* Makefile.config: really fix typo...
-	fixed typo.
-	removed reference to e2fsck.shared (now use e2fsck from package which is
-	shared
-	since 1.23-2mdk).
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: remove the temporary file /tmp/autoinst.img
-
-2001/08/28  siegel
-
-	* ChangeLog, keyboard.pm: 
-	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
-	if no laptop is detected (= give users the chance to know about the
-	existence of this variable).
-
-2001/08/28  yduret
-
-	* standalone/diskdrake: embedded mode nicer
-
-2001/08/28  Stefan Siegel  <siegel@mandrakesoft.com>
-
-	* keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard 
-	if no laptop is detected (= give users the chance to know about
-	the existence of this variable).
-
-2001/08/28  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: typo
-
-2001/08/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: default the licence agreement to "Refuse"
-
-	* standalone/drakboot: security fix and various
-	move to all_hds stuff
-
-	* c/stuff.xs.pm, bootloader.pm: security fix and various
-
-2001/08/28  warly
-
-	* share/rpmsrate: move libsafe to SERVER_OTHER 2
-	added prelude, libsafe...
-
-2001/08/28  yduret
-
-	* standalone/drakxconf: readded dsikdrake
-	added new items, remove some old ones
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: corrected hwaddr setting and draknet first window
-	display
-	corrected typo
-
-	* network/netconnect.pm: corrected hwaddr setting and draknet first window
-	display
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/network.pm: corrected hwaddr setting and draknet first window
-	display
-	corrected typo
-
-	* network/netconnect.pm: corrected hwaddr setting and draknet first window
-	display
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: nicer help display
-
-	* share/keyboards.tar.bz2: fix the rights
-
-	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected bad window size
-
-	* network/network.pm: make it compile
-	corrected hwaddr stuff
-	added HWADDR
-
-	* network/tools.pm: corrected internet initscript
-
-	* any.pm, mouse.pm: make it compile
-	add_devfslink
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
-	Added Latvian keyboard
-
-	* share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX
-
-	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm: nicer help display
-
-	* diskdrake.pm: use empty hash instead of the raid/loopback array
-
-	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC
-
-2001/08/27  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: corrected bad window size
-
-	* network/network.pm: added HWADDR
-
-	* network/tools.pm: corrected internet initscript
-
-2001/08/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej
-	patch to support CHAP again.
-
-2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
-	Added Latvian keyboard
-
-2001/08/27  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: use empty hash instead of the raid/loopback array
-
-2001/08/26  warly
-
-	* share/rpmsrate: add some important packages
-
-2001/08/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: require -> use
-
-	* install_any.pm: save the .img file so that multi-cd install won't ask to
-	re-enter first cd
-
-2001/08/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/26  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile, share/po/.cvsignore: fetch directly the latest
-	drakx-help.xml
-
-2001/08/25  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakbug_report: add "rpm -qa"
-
-	* bootlook.pm: fix deprecated call standalone::pkgs_install
-
-	* diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/25  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm, steps.pm: icon correction
-
-2001/08/25  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): accept mounting iso9660 filesystem as it should be
-	(write_fstab): enable mounting more than one swap :)
-
-	* bootlook.pm: fix deprecated call standalone::pkgs_install
-
-	* install_steps.pm: added the missing security parameter to
-	set_default_options
-
-	* diskdrake.pm: don't the grab flag propagate everywhere
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm,
-	pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal
-	pix
-
-	* standalone/mousedrake: updated mouse test
-
-2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
-	uncompressing of ramdisk will rulz now
-
-	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
-	parameter provided in network steps
-
-	* mdk-stage1/probing.c: 
-	  - descr of proc files
-	  - fix small typo (segfault or not segfault? that's the question)
-	enable install from Compaq Smart Array
-
-	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
-	than gcc statically
-
-	* mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart
-	Array
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/pcmcia_config.patch: update the patch
-
-	* Makefile (test_pms): make perl_checker skip help.pm
-	ensure no .orig are generated when the pcmcia patch is applied
-
-	* tools/make_mdkinst_stage2: give a little more free space (esp. for
-	russian lang)
-
-	* lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
-	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates
-	help.pm from xml doc done by doc team
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm: bugfix, speedtouch help
-
-	* standalone/mousedrake: updated mouse test
-
-2001/08/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed possible bug (not sorted partition when calling
-	mount_part).
-
-	* install_any.pm: fixed hdInstallPath for an hd installation without
-	usingRamdisk (not installing
-	urpmi in such case).
-	updated packages to copy for printerdrake, removed almost obsoletes
-	XFree86
-	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
-	3DLabs)
-	which means user will have to change CD back to CD#1 if he a such a
-	card.
-	removed obsolete code for cond_remount and cond_umount and update
-	hdInstallPath
-	for hd installation.
-
-	* diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of
-	common::useRamdisk().
-	take care mount point action is available for the hd installation
-	partition only
-	if a ramdisk is used (as it can be unmounted).
-	use more global isMagicPart instead of isInstallHdPart.
-	added real_mntpoint documentation and take care of hd install partition
-	for
-	available actions.
-
-	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
-	partition.
-	fixed partition never seen as mounted, added special case for
-	real_mntpoint to
-	remount magic partition on the right place.
-
-2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
-	uncompressing of ramdisk will rulz now
-
-	* mdk-stage1/automatic.c: revert my auto->interactive patch
-
-	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
-	parameter provided in network steps
-
-	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
-	than gcc statically
-
-	* mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable
-	install from Compaq Smart Array
-
-2001/08/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm:
-	enabling euro and utf-8 for some languages; added unicode font
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-
-	* tools/pcmcia_config.patch: update the patch
-
-	* lang.pm: no need for UTF-8/LC_CTYPE
-	(load_mo): if not usingRamdisk, don't try getFile
-
-	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-	(Done): do not write fstab nor ask about it in install
-
-	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-	* Makefile: ensure no .orig are generated when the pcmcia patch is applied
-
-	* partition_table.pm (write): do not die when real_mntpoint fs fail to
-	unmount/remount, just log
-	(write): unmount+remount real_mntpoint before doing the kernel_read
-
-	* share/gen_locales.sh: no need for UTF-8/LC_CTYPE
-
-	* pkgs.pm: fix "invalid file"
-
-2001/08/24  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: speedtouch configuration
-
-	* my_gtk.pm: gtk_create_xpm handles no absolute xpm path
-
-	* pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm:
-	added new mouse pixmap for mousedrake
-
-	* network/adsl.pm: bugfix, speedtouch help
-	added aliases for speedtouch stuff
-	speedtouch configuration
-	removed adsl detectioin, once again.
-
-	* standalone/mousedrake: no absolute pixmap reference
-	new mousedrake. experimental
-
-	* network/tools.pm: speedtouch configuration
-	export write_initscript, correct initscript.
-
-2001/08/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed possible bug (not sorted partition when calling
-	mount_part).
-
-	* diskdrake_interactive.pm: take care mount point action is available for
-	the hd installation partition only
-	if a ramdisk is used (as it can be unmounted).
-	use more global isMagicPart instead of isInstallHdPart.
-	added real_mntpoint documentation and take care of hd install partition
-	for
-	available actions.
-
-	* install_any.pm: fixed hdInstallPath for an hd installation without
-	usingRamdisk (not installing
-	urpmi in such case).
-	updated packages to copy for printerdrake, removed almost obsoletes
-	XFree86
-	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
-	3DLabs)
-	which means user will have to change CD back to CD#1 if he a such a
-	card.
-	removed obsolete code for cond_remount and cond_umount and update
-	hdInstallPath
-	for hd installation.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
-	mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures
-	and updated documentation.
-
-	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
-	partition.
-	fixed partition never seen as mounted, added special case for
-	real_mntpoint to
-	remount magic partition on the right place.
-
-2001/08/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (write): do not die when real_mntpoint fs fail to
-	unmount/remount, just log
-	(write): unmount+remount real_mntpoint before doing the kernel_read
-
-	* install_steps.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-
-	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
-	cond_remount_hdimage
-	(Done): do not write fstab nor ask about it in install
-
-	* lang.pm (load_mo): if not usingRamdisk, don't try getFile
-
-	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'
-
-2001/08/24  siegel
-
-	* share/po/de.po: New & shiny german version
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/el.po: updated Greek file
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/23  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: at_boot connection,resolvconf in profiles
-
-	* standalone/draksec: addedlibsafe option
-
-	* network/adsl.pm: restart network after having tested adsl. experimental
-
-2001/08/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: removed unusefull greping when building package
-	tree.
-
-2001/08/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: work on GAMES section
-
-2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/lv.po: updated Latvian file
-
-2001/08/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not
-	using ramdisk
-	(disable_user_view): damned kdmrc moved
-
-	* diskdrake_interactive.pm: cancel at startup will now exit
-	ask wether to save fstab
-	(part_possible_actions): have "Mount point" first to please fpons
-
-	* fs.pm: keep the freq&passno of /etc/fstab
-
-	* tools/i386/netboot/menu.lst.example,
-	tools/i386/netboot/make_boot_network,
-	tools/i386/netboot/automatic.para.default: as we now have
-	menu.lst.example, i remove automatic.para for more flexibility
-
-	* lang.pm: fix locale support when usingRamdisk
-
-2001/08/22  anoncvs
-
-	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
-	<dxiaoming@mandrakesoft.com>
-	Updated chinese (simplied) translation.
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
-	* network/nfs.pm: pleac perl_checker
-
-	* interactive_gtk.pm: more intelligent setting back the selected value in
-	the clist and ctree
-	(done already for entry)
-	  - fix entries editing causing the cursor to go to the end of line
-	  - select the text
-
-	* c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside
-	otherwise LOG is closed and rpmlib tries to write in it and ...
-
-2001/08/22  anoncvs
-
-	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
-	<dxiaoming@mandrakesoft.com>
-	Updated chinese (simplied) translation.
-
-2001/08/22  fabman
-
-	* share/po/es.po: updated spanish .po files for DrakX and drakbootdisk
-
-2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
-	entries are not given
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
-	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
-	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
-	but ramdisk Read Only
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R
-
-	* bootlook.pm: fix typo
-
-	* network/nfs.pm: pleac perl_checker
-
-	* install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed
-	and rpmlib tries to write in it and ...
-	do not call configurePrinter if no printer is wanted
-
-	* interactive_gtk.pm: more intelligent setting back the selected value in
-	the clist and ctree
-	(done already for entry)
-	  - fix entries editing causing the cursor to go to the end of line
-	  - select the text
-
-	* c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is
-	closed and rpmlib tries to write in it and ...
-
-2001/08/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: fixed int and float checking which should accept
-	negative number (added explicit
-	positive too), cleaned code for some perl idioms.
-
-	* install_steps.pm: updated configurePrinter to use foomatic printer
-	configuration.
-
-2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
-	entries are not given
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
-	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
-	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
-	but ramdisk Read Only
-
-2001/08/22  kjx
-
-	* share/po/zh_CN.GB2312.po: review
-	review
-
-2001/08/22  Pixel  <pixel@mandrakesoft.com>
-
-	* bootlook.pm: fix typo
-
-	* install_steps_auto_install.pm: don't have formatPartitions interactive
-	by default
-
-	* install_steps.pm: do not call configurePrinter if no printer is wanted
-
-2001/08/22  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/21  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: added rpcinfo to the tar
-	corrected bad Makefile : rpcinfo-flushed.c comes from tools.
-
-	* standalone/draknet: ergonomy correction
-
-	* network/tools.pm: corrected qq bug
-	corrected bug
-
-	* standalone/net_monitor: log updatede
-	removed memoty leak
-	time connection label
-
-2001/08/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved installation code of foomatic (only)
-	if a printer may be chosen.
-
-	* install_any.pm: fixed hd installation for urpmi.
-
-	* printerdrake.pm: slight rewrite of some perl idioms.
-
-2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-	updated pot file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2001/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5
-
-	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
-	install
-
-	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
-	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-
-	* install_any.pm: cleanup
-
-	* install_steps_interactive.pm: fix '$' in i18n message
-
-2001/08/21  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: removed memoty leak
-	time connection label
-
-	* network/tools.pm, network/modem.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm: generik internet initscript, planq
-	the children again
-
-	* network/adsl.pm: speedtouch config
-	generik internet initscript, planq the children again
-
-2001/08/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed hd installation for urpmi.
-
-2001/08/21  kjx
-
-	* share/po/zh_CN.GB2312.po: review
-
-2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/21  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix spelling error
-
-	* install_any.pm: cleanup
-	install hotplug if usb (i kept usbd just in case)
-
-	* diskdrake_interactive.pm (Create): force no sorting on filesystems,
-	editable mount points
-
-	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
-	install
-
-	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot
-
-	* install_steps_interactive.pm: fix '$' in i18n message
-
-	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
-	umask=0 only if security level < 3
-
-2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
-	nowhere)
-
-2001/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: basic nfs handling in drakx
-	fix bug 4257
-
-	* detect_devices.pm (raidAutoStart): fix for when kmod is there
-
-	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
-	with devfs
-
-	* diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder
-	to umount /tmp/hdimage only when needed
-
-	* Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm,
-	tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in
-	drakx
-
-2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
-	nowhere)
-
-2001/08/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request
-	of Alex Hulse <axh0@aber.ac.uk> on cooker)
-
-	* detect_devices.pm (raidAutoStart): fix for when kmod is there
-
-	* diskdrake.pm: remove test code
-
-	* fs.pm: fix bug 4257
-
-	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
-	with devfs
-
-	* install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder
-	to umount /tmp/hdimage only when needed
-
-	* interactive_gtk.pm (wait_message_nextW): fix previous text == new text
-	causing no
-	expose_event causing dead loop
-
-2001/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake_interactive.pm: save fstab on exit
-
-	* fsedit.pm: various typos fix
-
-	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	make the devfs= mount or nomount choice based on raid-based root work
-
-	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	fix diskdrake requiring gtk
-	add some test code
-
-	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
-	removed unless we're in ramdisk
-	various typos fix
-
-	* install_steps_interactive.pm, common.pm, install2.pm, install_any.pm,
-	lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-
-2001/08/19  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: major fs.pm rework + adaptation to it
-	don't show nfs/smb/removable in install
-	basic smb handling
-
-	* network/smb.pm: basic smb handling
-
-	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	make the devfs= mount or nomount choice based on raid-based root work
-	disable supermount for the moment
-	major fs.pm rework + adaptation to it
-
-	* install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in
-	usingRamdisk, ensure no files are removed unless we're in ramdisk
-	simplify
-
-	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
-	files are removed unless we're in ramdisk
-	fix diskdrake requiring gtk
-	add some test code
-	major fs.pm rework + adaptation to it
-
-	* install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files
-	are removed unless we're in ramdisk
-	major fs.pm rework + adaptation to it
-
-	* partition_table.pm: remove JFS from @important_types (too broken for the
-	moment)
-	remove isSupermount (was unused)
-
-	* common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in
-	usingRamdisk, ensure no files are removed unless we're in ramdisk
-
-	* interactive_gtk.pm (create_ctree): fix focusing (the assumption number
-	of leaves = number of lines is dumb)
-
-	* fsedit.pm: various typos fix
-	major fs.pm rework + adaptation to it
-
-	* bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it
-
-	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
-	removed unless we're in ramdisk
-	various typos fix
-	major fs.pm rework + adaptation to it
-	cleanup
-	basic smb handling
-
-	* diskdrake_interactive.pm: save fstab on exit
-	major fs.pm rework + adaptation to it
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm: basic nfs/smb handling in diskdrake
-	fixes and function prototype removing
-
-	* diskdrake.pm: basic nfs/smb handling in diskdrake
-	nicer mount options code (for autofs and supermount)
-
-	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-
-	* interactive_gtk.pm: fix bug in box's height use
-
-	* partition_table.pm, any.pm: fixes and function prototype removing
-
-	* interactive.pm: readd the sorting based on size when no sorting is
-	precised
-
-	* my_gtk.pm (n_line_size): bigger spacing for 'various'
-
-	* standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb
-	handling in diskdrake
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (n_line_size): bigger spacing for 'various'
-	enhance look, fix ask_fileW
-
-	* fs.pm: basic nfs/smb handling in diskdrake
-	fixes and function prototype removing
-	(write_fstab): add notail for reiserfs partitions in any case
-	cleanup mounting options parsing
-
-	* diskdrake.pm: basic nfs/smb handling in diskdrake
-	nicer mount options code (for autofs and supermount)
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-	cleanup mounting options parsing
-
-	* raid.pm: update the raid size as it should be
-
-	* diskdrake_interactive.pm: basic nfs/smb handling in diskdrake
-	less verbose resize_reiserfs
-	update the raid size as it should be
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* fsedit.pm: basic nfs/smb handling in diskdrake
-	update the raid size as it should be
-
-	* network/tools.pm: fix typo
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* partition_table.pm: fixes and function prototype removing
-
-	* install_steps_interactive.pm, standalone/drakautoinst, proxy.pm,
-	install_interactive.pm, network/ethernet.pm, interactive_http.pm,
-	printerdrake.pm, Xconfigurator.pm, network/netconnect.pm,
-	network/network.pm, interactive_newt.pm, network/modem.pm: big renaming
-	of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered
-	in ask_from_
-
-	* standalone/diskdrake: basic nfs/smb handling in diskdrake
-
-	* any.pm: fixes and function prototype removing
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* interactive_gtk.pm: fix bug in box's height use
-	better radiobox keyboard handling
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-	enhance look, fix ask_fileW
-
-	* interactive.pm: readd the sorting based on size when no sorting is
-	precised
-	big renaming of ask_from_entries_refH in ask_from and
-	ask_from_entries_refH_powered in ask_from_
-
-	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
-	do not use devfs with root software raid
-
-2001/08/18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix pass $all_hds->{hds} instead of
-	$all_hds
-
-2001/08/18  siegel
-
-	* share/po/de.po: new german version
-
-	* standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm,
-	network/network.pm, raid.pm: fixed i18n
-
-	* printerdrake.pm: i18n fixes
-
-2001/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
-
-	* standalone/interactive_http/interactive_http.cgi: fix typo
-	restrict the progs callable to a few one.
-
-	* standalone/interactive_http/index.html.pl,
-	standalone/interactive_http/index.html: autogenerate index.html
-
-	* fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice
-	(with IA-like stripping of unused options)
-
-	* c/stuff.xs.pm: is_ext3 is needed in standalone
-	Xtest not needed in standalone
-
-	* c/Makefile.PL: is_ext3 is needed in standalone
-
-	* standalone/interactive_http/miniserv.init,
-	standalone/interactive_http/Makefile: restrict the progs callable to a
-	few one.
-
-	* Makefile.drakxtools: fix po not build, add interactive_http in DIRS
-
-	* modules.pm: move back sunhme in sparc only
-
-2001/08/17  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone
-
-	* interactive.pm, install2.pm: removed no_incon
-
-	* standalone/net_monitor: added no internet connection configured label on
-	button
-
-	* network/netconnect.pm, network/ethernet.pm: corrected connection script
-	creation
-
-2001/08/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of
-	unused options)
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* install_steps_interactive.pm, install_steps_auto_install.pm,
-	install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm,
-	standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm,
-	any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell
-	lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* diskdrake_interactive.pm: add mount options choice (with IA-like
-	stripping of unused options)
-	(part_possible_actions): have possible actions sorted the way we want
-	(Type): fix ext2->ext3 detection
-	a hell lot of cleanup/rewrite:
-	* diskdrake_interactive created, diskdrake is now interactive aware
-	* added some documentation about the structure used for partitioning
-	* all_hds now contain the various hds, lvm, raid
-	* cleanup the isLVM, isRAID and alike functions
-	* field {type} in detect_devices is now {media_type}
-	* detect_devices::floppies is now floppies_dev
-	* removed old function prototypes
-
-	* modules.pm: move back sunhme in sparc only
-
-2001/08/17  Till Kamppeter <till@mandrakesoft.com>
-
-	* share/rpmsrate: Corrected listing of packages for printing in 'INSTALL'
-	section.
-
-2001/08/17  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-	remove shapecfg and gpa
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of CUPS not being installed during
-	installation
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, install_any.pm: add remove_unused to have more place for mo
-	files
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed bug of CUPS not being installed during
-	installation
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: add remove_unused to have more place for mo files
-	(getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the
-	unmounting at end of install to fail
-
-	* install2.pm: add remove_unused to have more place for mo files
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-
-2001/08/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: updated French file
-
-	* share/po/sk.po: updated Slovak file
-
-	* lang.pm: Added explicit setting of XFree86 internal XIM for Thai
-
-2001/08/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop
-	which caused the
-	unmounting at end of install to fail
-
-2001/08/16  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type
-
-2001/08/16  warly
-
-	* share/rpmsrate: add package needed by the install in INSTALL
-	add kernel in INSTALL
-	s/DrakConf/drakconf/
-
-2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian,
-	Italian and Korean files
-
-	* share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and
-	Serbian files
-
-2001/08/15  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/diskdrake: oops reverting modifs commited by error
-	fix XkbOptions handling
-
-	* standalone/keyboarddrake: fix XkbOptions handling
-
-2001/08/15  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: Let the "Options" button only appear when
-	the queue is Foomatic or with PPD (CUPS)
-
-2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean
-	files
-
-	* share/po/es.po: updated spanish and Indonesian files
-
-	* share/po/id.po: updated Indonesian, Italian and Korean files
-	updated spanish and Indonesian files
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: added options
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: oops, fix type of installing X or not
-	  - fix choice of packages when auto install
-
-	* Makefile.config: add drakautoinst in drakxtools standalone binaries
-
-	* install_steps_interactive.pm, install2.pm: 
-	  - fix createBootdisk with auto
-	  - fix setupBootloader with auto
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* install_steps.pm, network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm: add number-only device-name handling (eg: "801" is "sda1")
-
-	* interactive_gtk.pm, interactive.pm: 
-	  - small fixes (esp. gtk sensitive handling)
-	  - add ask_file
-	  - add "gtk" preference field
-
-	* my_gtk.pm: remove ask_file (was unused)
-
-	* http.pm: cleanup to please perl_checker
-
-	* Makefile (TAGS): add MDK/Common files
-
-	* services.pm: cleanup (it was working, but wasn't nice)
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected activation button
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: oops, fix type of installing X or not
-	  - fix choice of packages when auto install
-
-	* Makefile.config: add drakautoinst in drakxtools standalone binaries
-
-	* install_steps_interactive.pm, install2.pm: 
-	  - fix createBootdisk with auto
-	  - fix setupBootloader with auto
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* install_steps.pm, network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix typo?
-
-2001/08/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Transfer queues non-interactively when switching
-	between LPD and LPRng.
-
-2001/08/14  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected activation button
-
-2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm,
-	network/netconnect.pm: 
-	  - fix behaviour of draknet when auto-install
-	  - remove auto flag when error-in-step
-
-	* Xconfigurator.pm: fix automatic configuration
-
-	* install_any.pm: 
-	  - fix choice of packages when auto install
-
-2001/08/14  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: fix typo?
-
-2001/08/14  Till Kamppeter <till@mandrakesoft.com>
-
-	* printer.pm: Removed superfluous lines.
-
-	* printerdrake.pm: Transfer queues non-interactively when switching
-	between LPD and LPRng.
-	Wait message for queue transfer, manufacturer name bugfix
-
-2001/08/13  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage.
-	Removing old version of eepro100 (no stage1).
-
-	* tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage.
-
-2001/08/13  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: corrected 'no icon'
-
-	* network/adsl.pm, network/netconnect.pm: adsl autodetection activated
-	(planq the children)
-
-2001/08/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather
-	than from ..
-	initial revision for drakautoinst
-	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
-	  - use additional fields {auto} and {noauto}, by step, to ease
-	interactive auto install and oem stuff
-	  - in install2.pm, perform each step either from the interactive class
-	or from install_steps, according to the {auto} flag
-	  - id, tell each step to not try to be automatic if {noauto}
-	  - in the install, have auto install bootdisk created in install_any so
-	we can always write a bootdisk (from install_steps) for further use from
-	drakautoinst in standalone
-	  - interactive version of install_steps_auto_install is now inheriting
-	from the interactive class, so we can click on a previous automatic step
-	and have it interactively during an interactive auto install
-
-	* install_steps.pm, install_steps_interactive.pm,
-	install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm:
-	initial revision for drakautoinst
-	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
-	  - use additional fields {auto} and {noauto}, by step, to ease
-	interactive auto install and oem stuff
-	  - in install2.pm, perform each step either from the interactive class
-	or from install_steps, according to the {auto} flag
-	  - id, tell each step to not try to be automatic if {noauto}
-	  - in the install, have auto install bootdisk created in install_any so
-	we can always write a bootdisk (from install_steps) for further use from
-	drakautoinst in standalone
-	  - interactive version of install_steps_auto_install is now inheriting
-	from the interactive class, so we can click on a previous automatic step
-	and have it interactively during an interactive auto install
-
-2001/08/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm:
-	auto_inst enhancements
-
-	* install_steps_interactive.pm, standalone/XFdrake, install_steps.pm,
-	Xconfigurator.pm: really use a class_discard for Xconfigurator::main
-
-	* devices.pm: add /dev/hd[mt] handling
-
-2001/08/13  siegel
-
-	* share/po/de.po: new german version
-
-2001/08/13  Till Kamppeter <till@mandrakesoft.com>
-
-	* printerdrake.pm: Automatic transfer of queues when changing the spooler.
-	Update printer queue list when exiting during install, so that the
-	"Summary" entry is correct.
-	When one sayd "No" on the test page, the modify dialog was not pointing
-	to the current printer
-
-	* printer.pm: Automatic transfer of queues when changing the spooler.
-	The photo test page was not printed during installation.
-
-	* interactive.pm: Tree lists are sorted again now.
-
-2001/08/13  yduret
-
-	* standalone/drakxconf: removed diskdrake from the choice
-
-2001/08/12  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: longer timeout
-
-2001/08/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix ortograf typo
-
-2001/08/12  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: po->mo is no longer gonna be nasty with us
-
-	* interactive_gtk.pm: clean the nice till fix
-
-	* tools/cvslog2changelog.pl: add till
-
-	* Makefile: ensure locales.tar.bz2 in perl-install/share is build
-	po->mo is no longer gonna be nasty with us
-
-2001/08/12  Till Kamppeter <till@mandrakesoft.com>
-
-	* interactive.pm: Lists get only sorted when the "sort" option is given.
-
-	* printer.pm, printerdrake.pm: Check files before checking RPM database =>
-	Acceleration, waiting windows
-
-2001/08/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
-	share/themes/mdk-bg.png: new theme for beta
-
-	* share/theme-editor.pl: updated
-	now works.
-
-2001/08/11  tkamppeter
-
-	* printer.pm, printerdrake.pm: Restructuring continued and debugged
-
-2001/08/10  dam's  <damien@mandrakesoft.com>
-
-	* share/theme-editor.pl: added theme editor
-
-	* network/tools.pm: corrected password file substitution
-
-	* network/ethernet.pm: remove Data::Dumper
-
-	* network/netconnect.pm: added spped and timeout handling for isdn
-
-	* any.pm: corrected autologin question
-
-	* network/isdn.pm: tomeout option deactivated.
-
-	* standalone/draknet: corrected internet cnfiguration pop up, and some
-	other studds
-	ifup/down ethx, anew pixmap for list
-
-	* my_gtk.pm: removed Datta::Dump use
-
-	* pixmaps/eth_card_mini2.png: added
-
-2001/08/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: small font fix
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* share/po/bg.po: updated Bulgarian file
-	updated pot file
-
-2001/08/10  yduret
-
-	* bootlook.pm: corrected vnew usage (thx gc)
-
-2001/08/09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: added missing use
-	added pixmap for eth. Some factorisation
-
-	* network/tools.pm: added useless function type2interface for future use
-
-	* my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for
-	standalone mode.
-
-	* network/isdn.pm: labels corrections
-
-2001/08/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake,
-	standalone/drakxservices, standalone/net_monitor, standalone/draknet,
-	standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake,
-	standalone/drakxconf, standalone/adduserdrake, standalone/livedrake,
-	standalone/drakboot, standalone/draksec: use vnew the right way
-	everywhere
-
-	* standalone/drakgw: use vnew the right way everywhere
-	  - if package installs fail, redo one by one to know which one failed
-	  - try to not end up with a failing configuration file, if program is
-	brutally stopped
-	  - if unrecognized config file, don't fail, rather ignore it and
-	proceed
-	  - run dhcpd_update feature (if present) after setup of dhcp server
-
-	* share/rpmsrate: put traceroute in network client also, for claudio
-
-2001/08/09  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone.pm, install_any.pm: rename interactive_pkgs in
-	pkgs_interactive
-
-2001/08/09  siegel
-
-	* standalone/interactive_http/miniserv.logrotate,
-	standalone/interactive_http/Makefile: Added logrotate for
-	"/var/log/drakxtools_http.log"
-
-2001/08/09  tkamppeter
-
-	* printer.pm, printerdrake.pm: New structure for queue modification,
-	general structure clean-up
-
-2001/08/09  yduret
-
-	* bootlook.pm: readded in->do_pkg->install (i sux)
-	rewrite in a more drakx fashion
-
-	* my_gtk.pm: added gtkset_sensitive in wrapper..
-
-2001/08/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: typo
-	makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-	* Makefile: skip module CGI in test_pms (perl_checker)
-
-	* fsedit.pm (check_mntpoint): remove /root from directories that "should
-	remain within the root filesystem"
-
-	* proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm,
-	printerdrake.pm, standalone/drakgw, standalone/draknet,
-	network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy,
-	standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake,
-	network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add
-	interactive_pkgs stuff
-
-	* install_steps_interactive.pm: installing foomatic before doing anything
-	about printer
-	add interactive_pkgs stuff
-
-	* Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-	* install_any.pm (remove, remove_nodeps): fix typo
-	makes interactive_pkgs stuff work
-	add interactive_pkgs stuff
-
-2001/08/08  tkamppeter
-
-	* install_steps_interactive.pm: Installation fitted to new printerdrake
-
-	* printer.pm: Different choosable test pages available now
-	Corrected init script calls in the (start|stop|restart)_service
-	functions
-
-	* printerdrake.pm: Different choosable test pages available now
-	Removed superfluous line in install_spooler function
-
-2001/08/08  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): add drakxtools-http
-
-2001/08/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: nex features
-
-	* network/netconnect.pm: removed debugging message
-
-	* network/isdn.pm: corrected pkgs use -> require
-
-	* my_gtk.pm: added gtkset_relief
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb
-	removing for re-adding with -kb
-
-2001/08/07  tkamppeter
-
-	* printer.pm, printerdrake.pm: Automatic installation of all needed
-	packages
-
-2001/08/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected label
-
-	* network/netconnect.pm: removed debugging message
-
-	* standalone/net_monitor: nex features
-	added color choice
-	lot of improvments
-
-	* network/isdn.pm: corrected pkgs use -> require
-
-	* my_gtk.pm: added gtkset_relief
-
-	* pixmaps/network.png, pixmaps/draknet_step.png: added
-
-2001/08/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c: say that it's a data read error, when we can't load
-	the ramdisk
-
-	* mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system
-	wide bzlib.h but our own provided one
-
-2001/08/07  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/tree/etc/issue: fix distrib number
-
-	* interactive.pm: adding http feature, mainly for standalone tools
-
-	* standalone/miniserv.pem, standalone/miniserv.pl: Initial revision
-	import
-
-	* standalone/interactive_http/miniserv.pl: add interactive_http
-	Initial revision
-
-	* resize_fat/main.pm: fix
-
-	* partition_table.pm: nicer names for journalised fs
-
-	* Makefile.drakxtools, standalone/interactive_http/miniserv.init,
-	standalone/interactive_http/index.html,
-	standalone/interactive_http/interactive_http.cgi,
-	standalone/interactive_http/miniserv.conf,
-	standalone/interactive_http/miniserv.pam,
-	standalone/interactive_http/miniserv.users, Makefile,
-	standalone/interactive_http/Makefile: add interactive_http
-
-	* interactive_http.pm, standalone/interactive_http.cgi: add
-	interactive_http
-	adding http feature, mainly for standalone tools
-
-	* share/diskdrake.rc: have every journalised in darkred
-
-	* c/stuff.xs.pm: add S_IFIFO
-
-	* standalone/interactive_http/miniserv.pem: Initial revision
-
-2001/08/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: debugging, profile coding, isdn 128 debugging
-	corrected gtkradio : shift instead of pop
-
-	* interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift
-	instead of pop
-
-	* network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging,
-	profile coding, isdn 128 debugging
-
-2001/08/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/i386/busybox: try a busybox with better globbing under the SHELL
-
-2001/08/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/de.po: Updates to German file by Peer Dunker <peer46@gmx.net>
-
-	* share/po/vi.po: updated Vietnamese file
-
-2001/08/06  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: kernel_arch removed
-
-	* fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc)
-
-	* interactive_gtk.pm, interactive_newt.pm: cleanup, functions already
-	defined in interactive
-
-2001/08/06  yduret
-
-	* tinyfirewall.pm: use MDK::Common;
-	use network::netconnect;
-
-	* standalone/drakgw: use MDK::Common;
-	use network::netconnect; and update functions call from netconnect
-
-2001/08/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eo.po: updated Esperanto file
-
-2001/08/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: switch to gtk install when
-	interactiveSteps is defined
-
-2001/08/05  tkamppeter
-
-	* printer.pm, printerdrake.pm: Automatic installation and start of the
-	desired printer spooler
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: add tune2fs enabling switching from ext2 to ext3
-
-	* fs.pm, fsedit.pm, partition_table.pm: add ext3 support
-
-	* diskdrake.pm: add ext3 support
-	(Type): handle lossless switch from ext2 to ext3
-
-	* pkgs.pm: make perl_checker happy
-
-	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
-	* common.pm: moved arch() and alike to MDK::Common::System
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): simplify, fix
-	setSelectedFromCompssList not called in
-	expert even the first_time (especially nasty for auto_installs)
-
-	* fs.pm, partition_table.pm, fsedit.pm: add ext3 support
-
-	* diskdrake.pm: add ext3 support
-	(Type): handle lossless switch from ext2 to ext3
-
-	* install_steps_gtk.pm: add the feather feature, but do not enable it
-
-	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
-	(wait_msg doesn't
-	exist anywhere, it must be a fpons typo)
-
-	* pkgs.pm: make perl_checker happy
-
-	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3
-
-	* bootloader.pm: as when lilo is selected, we don't try to install grub,
-	just create the
-	config file in case it may be useful
-
-	* common.pm: moved arch() and alike to MDK::Common::System
-
-	* partition_table_raw.pm: add yaboot detection
-
-	* install_any.pm, share/rpmsrate: create a new flags "X" selected by
-	default, contain what X related packages
-	which were in "SYSTEM"
-
-2001/08/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): simplify, fix
-	setSelectedFromCompssList not called in
-	expert even the first_time (especially nasty for auto_installs)
-
-	* install_steps_gtk.pm: add the feather feature, but do not enable it
-
-	* bootloader.pm: as when lilo is selected, we don't try to install grub,
-	just create the
-	config file in case it may be useful
-
-	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
-	(wait_msg doesn't
-	exist anywhere, it must be a fpons typo)
-
-	* share/rpmsrate, install_any.pm: create a new flags "X" selected by
-	default, contain what X related packages
-	which were in "SYSTEM"
-
-2001/08/03  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor, network/tools.pm, network/netconnect.pm,
-	network/isdn.pm: debugging, 128Kb/s ISDN
-
-	* Makefile.drakxtools, Makefile: added network pms
-
-2001/08/03  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: typo fix
-	replace isJfs/isXfs/... with isThisFs("jfs"
-
-	* install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs"
-	update_userkderc is now called update_gnomekderc
-
-	* Makefile: better po skipping
-
-	* commands.pm (sync): (re-?)add
-
-	* fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm:
-	replace isJfs/isXfs/... with isThisFs("jfs"
-
-	* fsedit.pm (check_mntpoint): /root should remain within the root
-	filesystem
-
-	* install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr
-	update_userkderc is now called update_gnomekderc
-
-2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: 
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-	* mdk-stage1/doc/TECH-INFOS: 
-	  - small update
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, services.pm, install_interactive.pm,
-	network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of
-	testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk
-	is in ISA of the object
-
-	* partition_table.pm, fsedit.pm, diskdrake.pm: JFS support
-
-2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: 
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-	* mdk-stage1/doc/TECH-INFOS: 
-	  - small update
-	  - fix problem of clashing user/pass between adsl and ftp/http in case
-	of automatic installs
-	  - update doc on automatic install parameters (doc/TECH-INFOS)
-
-2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: instead of testing if ref($in) or ref($o) contains
-	/gtk/, test if interactive_gtk is in ISA of the object
-	add jfs support
-
-	* install_steps_interactive.pm, services.pm, install_interactive.pm,
-	network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in)
-	or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the
-	object
-
-	* partition_table.pm: JFS support
-	add jfs support
-
-	* fsedit.pm, diskdrake.pm: JFS support
-
-	* tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
-	* fs.pm, share/list: add jfs support
-
-2001/08/02  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl, timezone.pm: update ntp servers list
-
-	* fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support
-
-2001/08/01  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: write_on_text writes in blue instead of black
-
-	* network/isdn.pm: typo
-	added de-installation before installateion
-
-	* network/netconnect.pm: translation correction
-
-2001/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
-	auto_installs
-
-	* raid.pm (new): now works with a list of partitions
-
-2001/08/01  tkamppeter
-
-	* printer.pm: Fixed bug in recognizing the printer ID in the Foomatic
-	overview.
-
-2001/08/01  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: write_on_text writes in blue instead of black
-
-	* network/isdn.pm: typo
-	added de-installation before installateion
-
-	* network/netconnect.pm: translation correction
-
-2001/08/01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
-	auto_installs
-
-	* raid.pm (new): now works with a list of partitions
-
-2001/07/31  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: added splash screen between different
-	configurations. Added splash wizard mode
-	added intro step for each configuration type.
-
-	* network/tools.pm: corrected ask_connect_now
-
-	* my_gtk.pm: added write_on pixmap : a function to write text on pixma,
-	using fonts.
-
-	* network/ethernet.pm: added intro step for each configuration type.
-
-2001/07/31  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_steps_interactive.pm: after copying the auto install floppy,
-	sync in case you shall remove the
-	floppy right after the LED switches off yet the kernel decides to not
-	flush
-	everything
-
-	* modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet
-	installs
-
-	* bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux
-	so..)
-
-2001/07/31  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (translate): empty string translation is an empty string
-
-	* install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/
-
-	* share/rpmsrate: add cpio
-	lower gurpmi (5->4)
-
-	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale
-	support
-	better handling of locales
-
-	* Makefile.drakxtools (install): s/cp -rf/cp -rfL/   (-L = --dereference,
-	aka always follow symbolic links)
-
-	* install_steps_gtk.pm (installPackages): make $show_advertising a global
-	state (for Vincent Meyer)
-
-	* share/Makefile, Makefile: better handling of locales
-
-	* install_steps_auto_install.pm: remove bad prototype
-
-2001/07/30  dam's  <damien@mandrakesoft.com>
-
-	* network/ethernet.pm: added cable internet connection selection
-	added internet connection selection in case of multiple configurations
-
-	* network/netconnect.pm: corrected ask_connect_now behaviour
-	corrected ask_connect_now
-	debug
-	added internet connection selection in case of multiple configurations
-
-	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
-	corrected ask_connect_now
-	added internet connection selection in case of multiple configurations
-
-2001/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
-	hdlist files"
-	occurs when the hdlists are in fact not available
-
-	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
-	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
-	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
-	based on installed glibc
-
-	* printer.pm, printerdrake.pm: use MDK::Common
-	i wonder why it was included and Till used an older version without
-	merging?
-
-	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
-	yet)
-
-	* share/rpmsrate: raise rxvt (4->5)
-	lower rpmdrake & harddrake (5->4)
-	remove rootfiles (unneeded)
-
-	* Makefile: use -excludeMDK::Common::Globals for perl_checker
-	automatic handling of locales.tar.bz2 based on installed glibc
-
-2001/07/30  tkamppeter
-
-	* printer.pm, printerdrake.pm: In beginners mode one chooses only the
-	printer, not the driver (default driver)
-
-2001/07/30  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm: debug
-	added internet connection selection in case of multiple configurations
-
-	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
-	added internet connection selection in case of multiple configurations
-
-	* network/ethernet.pm: added cable internet connection selection
-	added internet connection selection in case of multiple configurations
-
-2001/07/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h:
-	have a memory limit also for Rescue (different one)
-
-2001/07/30  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm, printerdrake.pm: use MDK::Common
-	i wonder why it was included and Till used an older version without
-	merging?
-
-	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
-	yet)
-
-	* share/rpmsrate: raise rxvt (4->5)
-	lower rpmdrake & harddrake (5->4)
-	remove rootfiles (unneeded)
-
-	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
-	hdlist files"
-	occurs when the hdlists are in fact not available
-
-	* Makefile: use -excludeMDK::Common::Globals for perl_checker
-	automatic handling of locales.tar.bz2 based on installed glibc
-
-	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
-	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
-	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
-	based on installed glibc
-
-2001/07/28  tkamppeter
-
-	* printer.pm, printerdrake.pm: Support for PPD files of PostScript
-	printers (when CUPS is used)
-
-2001/07/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree
-	is seen as a package.
-
-	* interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on
-	cancel (previously always 1).
-	added a before leaving code to clean added reference (else it seems to
-	bahave
-	strangely on changing steps).
-	fixed wrong reference to added icons to ask_browse_tree_info_refW.
-
-	* services.pm: allow cancel on services which do not change anything.
-
-	* install_steps_interactive.pm: changed warn dialog to okcancel dialog
-	when asking user to insert Boot floppy
-	used or Update Modules floppy (die may cause to rerun install else).
-
-2001/07/27  gbeauchesne
-
-	* install_steps_gtk.pm: 
-	  - install_steps_gtk.pm (launchX) : create /var/log, if not existent,
-	for
-	XFree86.log
-
-2001/07/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: allow to escape from Update Modules if you don't
-	want to insert an ext2 floppy
-	Disk -> Floppy for Update Modules disk
-
-2001/07/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm,
-	Xconfigurator.pm: last of sync with PPC beta mods
-
-2001/07/27  tkamppeter
-
-	* standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake
-	changed to use Foomatic, driver options, spooler change
-
-2001/07/26  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn.pm: added firmware loading/configuration
-	not loading the module at detection.
-
-	* standalone/draknet: MDK::common correction
-
-	* modules.pm: added default option id="HiSax" to isdn module
-
-2001/07/26  fcrozat
-
-	* share/po/fr.po: Fix spelling of 'molette'
-
-2001/07/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: added blank and updatemodules options to DrakX.
-
-	* bootloader.pm: added prioritary kernel entry 'default' as the kernel
-	typically copied from a
-	modified blank.img file with a kernel (no initrd.img necessary to
-	build).
-	This kernel takes precedance over any other kernel.
-
-	* install_steps_interactive.pm: really fixes Diskette with Floppy.
-	fix typo as Diskette to Floppy.
-	add support for new modules load as described by GG.
-
-	* install_steps.pm: fixed some silly typo and tiny bugs.
-	fixed typo as Diskette to Floppy.
-	add support for modified blank.img floppy and Update Modules floppy.
-	In first case copy kernel to /boot/vmlinuz-default to be taken into
-	account by
-	bootloader suggestion method.
-	In second case, check installed kernel and update any modules listed in
-	the
-	Update Modules floppy.
-
-2001/07/26  gbeauchesne
-
-	* bootloader.pm: 
-	  - Don't set "lba32" on ia64
-
-2001/07/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass
-	"--blank" to DrakX when module loading is disabled
-	  - add "changedisk" feature
-	  - add "updatemodules" feature
-
-	* mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h: 
-	  - add "changedisk" feature
-	  - add "updatemodules" feature
-
-	* mdk-stage1/probing.c: silently load usb controllers
-
-2001/07/25  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: fixed new network organization
-
-	* standalone/net_monitor: updated. Profile handling.
-
-	* network/isdn_consts.pm: updated ISDN detection. Added firmware handling
-	and drivers other than hisax
-
-2001/07/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed no test (or die test) to void package read on depslist
-	(allowed to keep
-	package indexing good on multi-arch).
-	cleaned code to examine depslist.ordered and packages list.
-
-	* rescue/make_rescue_img: fixed to use perl-MDK-Common.
-
-	* tools/syncrpms: fixed still missing rpmtools:: before a version_compare
-	...
-
-2001/07/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: small typo
-
-	* mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting
-
-2001/07/25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile (install): build mo's
-
-	* commands: move to MDK::Common, bool->to_bool
-
-	* common.pm: do not export sync, keep it in common (esp. so that it
-	doesn't conflict with my_gtk::sync
-	(removeXiBSuffix): add TB (tera)
-
-	* share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common
-
-	* share/verify_modules.pl: new common syntax
-
-	* Makefile: 
-	  - temporary hack to have at least good UTF-8 based locales (otherwise
-	rpmlib segfaults)
-	  - touch share/po/*.po, so that they are not rebuilded (pablo takes
-	care of them)
-
-	* share/list: add MDK::Common::Globals
-
-	* partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm,
-	install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not
-	export sync, keep it in common (esp. so that it doesn't conflict with
-	my_gtk::sync
-
-2001/07/25  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: add decriptions for integrated Apple
-	Network/SCSI hardware
-
-2001/07/24  dam's  <damien@mandrakesoft.com>
-
-	* network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm:
-	corrected speed fax + PCI, updated configuration
-
-2001/07/24  daouda
-
-	* bootlook.pm: better runlevel handling -> persistent level choice
-
-2001/07/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-2001/07/24  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm: move to MDK::Common, bool->to_bool
-	fix syntax
-	removed/renamed unused/seldom-used functions
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* swap.pm: temporary hack to have at least good UTF-8 based locales
-	(otherwise rpmlib segfaults)
-	move to MDK::Common, bool->to_bool
-
-	* unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the
-	functional alternative to chomp (and works on lists)
-
-	* globals.pm, perl2fcalls: 
-	  - globals is now MDK::Common::Globals
-	  - perl2fcalls is now /usr/bin/perl_checker
-
-	* install_steps_gtk.pm: move to MDK::Common, bool->to_bool
-	move to MDK::Common, bool->to_bool
-	removed/renamed unused/seldom-used functions
-
-	* common.pm: move to MDK::Common, bool->to_bool
-	cleanup (remove unused stuff and dangerous prototypes)
-	removed/renamed unused/seldom-used functions
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* network/tools.pm, network/adsl.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm, network/modem.pm: 
-	  - globals is now MDK::Common::Globals
-	  - perl2fcalls is now /usr/bin/perl_checker
-	move to MDK::Common, bool->to_bool
-
-	* partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm,
-	standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm,
-	partition_table_mac.pm, standalone/mousedrake, devices.pm,
-	install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm,
-	install_steps_stdio.pm, loopback.pm, resize_fat/any.pm,
-	standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm,
-	interactive_gtk.pm, standalone/drakxservices, fsedit.pm,
-	network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm,
-	resize_fat/directory.pm, standalone/net_monitor,
-	install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm,
-	lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec,
-	standalone/drakxconf, resize_fat/info_sector.pm,
-	standalone/adduserdrake, sbus_probing/main.pm, printer.pm,
-	partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm,
-	Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm,
-	standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm,
-	interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm,
-	bootloader.pm: move to MDK::Common, bool->to_bool
-
-	* services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool
-	removed/renamed unused/seldom-used functions
-
-	* standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm,
-	detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool
-	generalize the use of chomp_ as the functional alternative to chomp (and
-	works on lists)
-
-	* Makefile: temporary hack to have at least good UTF-8 based locales
-	(otherwise rpmlib segfaults)
-	move to MDK::Common, bool->to_bool
-	move to MDK::Common, bool->to_bool
-
-2001/07/23  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm, network/tools.pm, network/isdn_consts.pm,
-	network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light.
-	Only 64kb/s and still some debuf stuff to be fixed.
-
-2001/07/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files
-
-2001/07/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: cleanup
-
-	* c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile,
-	tools/make_mdkinst_stage2, lang.pm, share/po/Makefile,
-	share/po/.cvsignore: do not use the po's directly. Use mo's through
-	gettext
-
-2001/07/22  dam's  <damien@mandrakesoft.com>
-
-	* network/netconnect.pm, network/isdn.pm: updated isdn config, moved
-	isdn_data from netconnect_const to isdn_const
-	big work on isdn. Not finished
-
-	* modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm:
-	big work on isdn. Not finished
-
-	* network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn
-	config, moved isdn_data from netconnect_const to isdn_const
-
-2001/07/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* docs/README.pxe: initial release, dhcpd and tftpd only.
-
-2001/07/20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/el.po: updated Greek file
-
-2001/07/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl
-
-	* lang.pm: fix
-	(load_po): enhance readability
-
-	* share/po/fake_c.pl: cleanup
-	externalize the pm 2 pm_.c in fake_c.pl
-
-	* common.pm (translate): basic plural forms handling (not finished)
-
-	* help.pm: fix missing ``"''
-
-	* bootloader.pm: fix
-	(install_lilo): order fat partitions first
-
-2001/07/19  dam's  <damien@mandrakesoft.com>
-
-	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
-	share/help.png: new color
-
-	* network/netconnect.pm: correct bug. thanx to the little stagiaire.
-
-2001/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
-	graphic logo for 8.1
-
-2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
-	share/po/eu.po: updated Croatian file
-
-2001/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
-	graphic logo for 8.1
-
-	* Xconfigurator.pm: fixed problable freeze on pci probe.
-
-2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
-	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
-	share/po/eu.po: updated Croatian file
-
-2001/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* globals.pm: no strict 'refs' instead of 'vars'
-
-	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
-	ask_install_simple (obsolete)
-
-	* install_steps_auto_install.pm: fix exit install in graphical
-	auto_install's
-
-2001/07/19  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based
-	on Michael Brown <mbrown@fensystems.co.uk> patch:
-	  - enables graphical steps in auto_installs for more than gtk
-	  - various cleanup
-
-	* globals.pm: no strict 'refs' instead of 'vars'
-
-	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
-	ask_install_simple (obsolete)
-
-2001/07/18  mbadaire
-
-	* modules.pm, install_any.pm, bootloader.pm: IA64 adaptation
-
-2001/07/18  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm, install_steps.pm, install_steps_interactive.pm,
-	tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm,
-	diskdrake.pm: roll back some changes from PPC beta - OldWorld vs
-	NewWorld bootloader
-	modem detection on ttyS0, new sound module in 2.4.4
-
-2001/07/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4
-	and S3 ViRGE on reboot
-	with Aurora).
-
-	* Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test
-	for these card.
-
-2001/07/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no
-	more used)
-
-	* keyboard.pm: small keyboard changes
-
-2001/07/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/po/fr.po: update
-
-2001/07/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
-	fsck succeeded in
-	fixing partition and now is ok).
-
-	* run_program.pm: changed exit code of failed exec in rooted to 128
-	instead of 1 (may clash with
-	exit code of fsck else).
-
-	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW
-	(default).
-
-	* services.pm: reworked to use new service layout for install.
-
-	* install_steps_gtk.pm: use common code for tree with info dialog
-	(individual package selection).
-
-	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
-	fsck succeeded in
-	fixing partition and now is ok).
-
-	* interactive_gtk.pm: merging common code for individual package selection
-	and service to create
-	ask_browse_tree_info_refW, added featrures for group icon always
-	up-to-date
-	(take some memory but not too much, not used if flat model).
-
-	* run_program.pm: changed exit code of failed exec in rooted to 128
-	instead of 1 (may clash with
-	exit code of fsck else).
-
-	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.
-
-2001/07/10  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build,
-	define TIOCSCTTY, Makefile mods
-
-2001/07/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added multiple tries if a transaction of only one package
-	fails.
-
-	* install_any.pm: added LDAP support for authentication.
-
-	* install_steps_interactive.pm: added LDAP support for password
-	authentication, updated root password window look.
-
-	* bootloader.pm: fixed compilation error.
-	removed compilation error, the resolution is not quite good and may be
-	reworked :-)
-
-	* help.pm: updated root password help.
-
-2001/07/09  mbadaire
-
-	* bootloader.pm: modify lilo.conf to elilo.conf if arch ia64
-
-	* common.pm: Add IA64 support
-
-2001/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
-	boot partition is
-	set correctly again
-
-2001/07/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
-	boot partition is
-	set correctly again
-
-2001/07/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
-	still causes dead
-	lock and may not reproduce correct list. take care of choice that need
-	to be
-	examined before else another package may be chosen if choice is not
-	satisfied
-	when selecting packages.
-
-	* install_any.pm: change all 8 space into a tabulation, this is simple and
-	may change visual
-	aspect but it gives correct output and filesize by 40%.
-
-2001/07/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
-	still causes dead
-	lock and may not reproduce correct list. take care of choice that need
-	to be
-	examined before else another package may be chosen if choice is not
-	satisfied
-	when selecting packages.
-
-	* install_any.pm: change all 8 space into a tabulation, this is simple and
-	may change visual
-	aspect but it gives correct output and filesize by 40%.
-
-2001/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl: some workarounds
-
-2001/07/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/ntp_servers.pl: some workarounds
-
-2001/07/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a
-	laptop is detected.
-
-2001/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules_descr.h: add usb net descriptions
-
-2001/07/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (file2part): created
-
-	* any.pm: ia64 bootloader configuration adaptations
-
-	* bootloader.pm: typo fix
-	ia64 bootloader configuration adaptations
-
-2001/07/04  dam's  <damien@mandrakesoft.com>
-
-	* globals.pm: added error handling
-
-	* network/netconnect.pm, network/ethernet.pm: modularized. It compiles,
-	runs, and works for some stuff.
-	modularization continuated
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-	corrected
-
-	* standalone/draknet: corrected
-
-	* network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and
-	works for some stuff.
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-	corrected
-
-	* network/network.pm: modularized. It compiles, runs, and works for some
-	stuff.
-	modularization continuated
-
-	* network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and
-	works for some stuff.
-	updated CVS:
-	----------------------------------------------------------------------
-	uses the fantastic global module.
-
-	* docs/net_object_class.fig: updated doc
-
-2001/07/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added missing last Card read from Cards+ file.
-	allow S3 card to have VideoRam uncommented, fix 86c368 video driver that
-	seems
-	needing VideoRam too.
-	fixed need of video ram if 86c368 and S3 ViRGE.
-
-	* install_any.pm: another too wide string truncated to 80 chars.
-	make auto_inst.cfg file no longer than 80 chars wide.
-
-	* install_steps_interactive.pm: added back timezone settings (thanks
-	FredC).
-
-2001/07/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*"
-
-	* mdk-stage1/newt-frontend.c: very nice things happen when you hardcode
-	arrays to a too small value
-
-	* docs/HACKING: update -d in order to get all the directories...
-
-2001/07/04  mbadaire
-
-	* tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64,
-	tools/ia64/e2fsck.shared: Ia64 Adaptation
-
-	* install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list,
-	share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64
-	adaptation
-
-2001/07/04  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (selected_leaves): fix dead-loop
-	(selected_leaves): make it work with loops (eg: mandrake_desk loops with
-	control-center resulting on none of them being a leaf)
-
-	* perl2fcalls: check exclude_uses before reporting bad use of "use"
-	exclude module globals from use's to look at
-
-	* globals.pm (import): yet another fix
-	fix a pb when init is called before another import
-	typo correction
-	enhanced: shared values are grouped together based on a name
-	module to share constant values between modules
-
-	* fsedit.pm: add /boot/efi in suggestions for ia64
-
-	* install_interactive.pm, install_steps.pm: fix typo
-	verify a /boot/efi partition exists
-
-	* Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list,
-	share/list.sparc: remove busybox as default shell. Only use it as the
-	interactive shell on tty2
-
-2001/07/03  dam's  <damien@mandrakesoft.com>
-
-	* network/adsl.pm, network/netconnect_consts.pm, network/tools.pm,
-	network/modem.pm, network/netconnect.pm, network/isdn.pm: network
-	subsystem now compiles. Enjoy
-
-	* docs/net_object_class.fig: documentation about net modules structure
-
-2001/07/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* network/netconnect.pm: fix another dam's sucks
-	fix dam's sucks
-
-	* network/netconnect_consts.pm, Makefile.config: fix dam's sucks
-
-	* standalone/XFdrake: expert is allowed to choose frame buffer.
-
-	* install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage
-	package selection file used by
-	auto_install too from packages tree directly on floppies.
-
-	* share/floppy.png: updated size to 16x22 to be more aligned.
-	for loading/saving packages selection.
-
-	* install_any.pm: modified g_default_packages to be used from package tree
-	save on floppy.
-
-	* install_steps_gtk.pm: added Load/Save on floppy.
-	added improve choice of package, well not very usefull but asked by
-	higher
-	people :-)
-
-2001/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/rp-pppoe/gui/html/props-basic.png,
-	mdk-stage1/rp-pppoe/gui/html/props-options.png,
-	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
-	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
-	mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop
-
-	* modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore,
-	mdk-stage1/usb-resource/Makefile,
-	mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile,
-	mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support
-	for install from USB Network Adapters
-
-2001/07/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po,
-	share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po,
-	share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po,
-	share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po,
-	share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file
-
-2001/07/03  Pixel  <pixel@mandrakesoft.com>
-
-	* timezone.pm (configureTimezone): propose a list of NTP servers
-	(ntp_server): fix
-	add ntp handling
-
-	* fs.pm (mount): fix fsck.ext2'ing
-	(mount): add fsck.ext2 before ext2-mounting
-
-	* share/themes/DarkMarble-gloom2.png: re-adding with -kb
-	re-adding with -kb
-
-	* pixmaps/user.png: re-adding with -kb
-	removing for re-adding with -kb
-	re-adding with -kb
-	removing for re-adding with -kb
-
-	* share/themes/blueHeart-button4.png, share/reload.png,
-	share/themes/focus.png, share/themes/DarkMarble-button3_in.png,
-	share/logo-mandrake.png, share/themes/marble3d-check1.png,
-	share/themes/blueHeart-button_def.png, share/rpm-semiselected.png,
-	share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png,
-	share/rpm-installed.png, share/themes/marble3d-button1.png,
-	share/logo-mandrake_sav.png, share/themes/mdk-button1.png,
-	share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png,
-	share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png,
-	share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png,
-	pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png,
-	share/themes/marble3d-button4.png, pixmaps/bootloader.png,
-	share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png,
-	share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png,
-	share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png,
-	share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png,
-	pixmaps/rootpasswd.png, share/help.png,
-	share/themes/DarkMarble-check_on.png,
-	share/themes/blueHeart-button1.png, pixmaps/keyboard.png,
-	pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png,
-	share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png,
-	pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb
-	removing for re-adding with -kb
-
-	* install_any.pm, install_steps.pm: add ntp handling
-
-	* tools/addchangelog.pl: reverted the last erroneous modif
-	re-adding with -kb
-
-	* tools/ntp_servers.pl: get a formatted list of NTP servers from an
-	authorised source
-
-	* install_steps_interactive.pm (doPartitionDisks): better error message
-	when no root partition is found
-	(configureTimezone): propose a list of NTP servers
-	add ntp handling
-
-	* docs/comparisons: re-adding with -kb
-
-2001/07/02  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: new network sources reorganizationCVS:
-	----------------------------------------------------------------------
-
-	* share/list: added modinfo
-
-	* modparm.pm: syntax correction
-
-	* network/netconnect_consts.pm, network.pm, standalone/draknet,
-	network/tools.pm, netconnect.pm, network/netconnect.pm,
-	network/ethernet.pm, network/isdn.pm, network/adsl.pm,
-	network/network.pm, network/modem.pm, netconnect_consts.pm: new network
-	sources reorganization
-
-2001/07/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: update po files
-
-2001/07/02  Pixel  <pixel@mandrakesoft.com>
-
-	* crypto.pm: remove buggy prototype
-
-	* share/po/Makefile: yet even better i18n strings extraction
-	  - fix to add some missing messages
-	  - add more verif
-
-	* c/stuff.xs.pm: use size_t instead of int where it should
-
-	* Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in
-	XF3)
-
-	* share/po/b_dump_strings.pm: high level i18n messages getting. only
-	partial stuff. Used only for verification
-
-	* perl2fcalls: add handling of using pkg::func when func is provided by
-	pkg2 use'd by pkg
-
-2001/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-2001/06/25  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: switch from llseek to lseek64
-
-2001/06/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/06/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: take care of enterprise kernel if installed.
-
-	* install_any.pm: automagically install kernel-enterprise if memory is
-	greater than 800MB.
-
-2001/06/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzyise
-
-2001/06/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm,
-	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, install_steps_interactive.pm,
-	share/po/pl.po, share/po/no.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po,
-	share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/
-
-2001/06/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added minimal support for rpmtools >= 3.0
-
-2001/06/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: generate_automatic_stage1_params: listize
-	use busybox for the shell of stage2
-
-	* mdk-stage1/Makefile: defaults to not spawn shell
-
-	* mdk-stage1/hack: kloug
-
-	* Makefile, tools/i386/busybox, share/list.ppc, share/list,
-	share/list.alpha, share/aliases: use busybox for the shell of stage2
-
-2001/06/21  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-	s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-	* genmodparm: remove duplicate, look in gi/tools
-
-	* standalone/printerdrake, install2, docs/HACKING, tools/genmodparm,
-	mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README,
-	standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit,
-	mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm,
-	mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl,
-	bootloader.pm: s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-	* mdk-stage1/make_boot_img: remove GG sux
-	s/Linux-Mandrake/Mandrake Linux/
-	s/linux-mandrake/mandrakesoft/
-	(hand made, no i18n messages done)
-
-2001/06/11  dam's  <damien@mandrakesoft.com>
-
-	* proxy.pm: updated
-	typoCVS:
-	----------------------------------------------------------------------
-	proxy
-
-	* my_gtk.pm: added gtkset_layout
-
-	* standalone/drakproxy: corrected CVS:
-	----------------------------------------------------------------------
-	updated
-	perlised
-
-	* interactive.pm: no icon if wizard
-
-2001/06/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: added some bigger memory range.
-
-	* Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when
-	modifying mga_dma = 0
-	really fix the Matrox G200 PCI card acceleration using XF3, by disabling
-	DMA on
-	/etc/X11/glx.conf
-	added magic probe of resolution found, if the probed resolution seems
-	strange
-	according to memory available, it try to let the user select the right
-	resolution and depth.
-
-	* install_steps.pm, printer.pm: applied patches given for printer
-	configuration bug reported by David Eastcott.
-
-2001/06/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: have PPP drivers in net_raw rather than in net
-	add PPP modules for 'net' drivers
-
-	* rescue/tree/etc/rc.sysinit: minor changes
-
-	* rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much
-	as possible before rebooting the rescue
-
-	* mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c,
-	mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h,
-	mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c,
-	mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl
-	pppoe installation available
-	Initial revision
-	import initial ppp sources
-
-	* mdk-stage1/dhcp.c: change location of error message when no reply
-	received
-
-	* mdk-stage1/rp-pppoe/man/pppoe-relay.8,
-	mdk-stage1/rp-pppoe/configs/firewall-masq,
-	mdk-stage1/rp-pppoe/gui/html/props-nic.png,
-	mdk-stage1/rp-pppoe/src/pppoe-sniff.c,
-	mdk-stage1/rp-pppoe/configs/firewall-standalone,
-	mdk-stage1/rp-pppoe/gui/html/tkpppoe.html,
-	mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui,
-	mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8,
-	mdk-stage1/rp-pppoe/scripts/adsl-start.in,
-	mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go,
-	mdk-stage1/rp-pppoe/man/pppoe.8,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
-	mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in,
-	mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c,
-	mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c,
-	mdk-stage1/rp-pppoe/man/pppoe-server.8,
-	mdk-stage1/rp-pppoe/configs/pppoe.conf,
-	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
-	mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh,
-	mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure,
-	mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c,
-	mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c,
-	mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h,
-	mdk-stage1/rp-pppoe/scripts/adsl-init.in,
-	mdk-stage1/rp-pppoe/rp-pppoe.spec,
-	mdk-stage1/rp-pppoe/scripts/adsl-connect.in,
-	mdk-stage1/rp-pppoe/man/pppoe.conf.5,
-	mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in,
-	mdk-stage1/rp-pppoe/man/adsl-start.8,
-	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
-	mdk-stage1/rp-pppoe/rp-pppoe-gui.spec,
-	mdk-stage1/rp-pppoe/gui/html/props-basic.png,
-	mdk-stage1/rp-pppoe/man/adsl-status.8,
-	mdk-stage1/rp-pppoe/configs/pppoe-server-options,
-	mdk-stage1/rp-pppoe/man/adsl-connect.8,
-	mdk-stage1/rp-pppoe/scripts/adsl-setup.in,
-	mdk-stage1/rp-pppoe/scripts/adsl-stop.in,
-	mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c,
-	mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c,
-	mdk-stage1/rp-pppoe/README,
-	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
-	mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1,
-	mdk-stage1/rp-pppoe/scripts/adsl-status,
-	mdk-stage1/rp-pppoe/man/adsl-setup.8,
-	mdk-stage1/rp-pppoe/gui/html/props-options.png,
-	mdk-stage1/rp-pppoe/src/configure.in,
-	mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c,
-	mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in,
-	mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c,
-	mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision
-	import initial sources from rp-pppoe v3.0
-
-	* mdk-stage1/Makefile: change handling of .depend in Makefile
-	have adsl pppoe installation available
-
-	* mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD
-	that will show us '**' for passwords
-
-	* mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore,
-	mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore,
-	mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c,
-	mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile,
-	mdk-stage1/make_boot_img: have adsl pppoe installation available
-
-	* detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to
-	autodetect raid arrays (still needs a kernel that implements the
-	ioctl..)
-
-	* tools/Makefile: perl 5.6.1 now
-
-	* mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from
-	my code anymore, expect the bootloader to set the parameter correctly
-
-	* mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README,
-	mdk-stage1/ppp/solaris/Makefile.sol2,
-	mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down,
-	mdk-stage1/ppp/solaris/Makefile.sol2-64,
-	mdk-stage1/ppp/include/net/ppp_defs.h,
-	mdk-stage1/ppp/pppstats/Makefile.sunos4,
-	mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c,
-	mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h,
-	mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux,
-	mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c,
-	mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2,
-	mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h,
-	mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2,
-	mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc,
-	mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c,
-	mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c,
-	mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c,
-	mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h,
-	mdk-stage1/ppp/svr4/ppp_comp_mod.c,
-	mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c,
-	mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer,
-	mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h,
-	mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h,
-	mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c,
-	mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets,
-	mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8,
-	mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2,
-	mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile,
-	mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4,
-	mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX,
-	mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c,
-	mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh,
-	mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c,
-	mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8,
-	mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h,
-	mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h,
-	mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c,
-	mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs,
-	mdk-stage1/ppp/pppd/sys-linux.c.wtmp,
-	mdk-stage1/ppp/include/linux/if_pppvar.h,
-	mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux,
-	mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam,
-	mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3,
-	mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c,
-	mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c,
-	mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile,
-	mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8,
-	mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h,
-	mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ,
-	mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c,
-	mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2,
-	mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh,
-	mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL,
-	mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c,
-	mdk-stage1/ppp/pppd/plugins/passprompt.c,
-	mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c,
-	mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback,
-	mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP,
-	mdk-stage1/ppp/pppd/Makefile.sol2,
-	mdk-stage1/ppp/pppd/plugins/minconn.c,
-	mdk-stage1/ppp/etc.ppp/options.options,
-	mdk-stage1/ppp/pppdump/Makefile.linux.makeopt,
-	mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem,
-	mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System,
-	mdk-stage1/ppp/etc.ppp/chap-secrets,
-	mdk-stage1/ppp/pppstats/Makefile.linux,
-	mdk-stage1/ppp/sample/pap-secrets,
-	mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8,
-	mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on,
-	mdk-stage1/ppp/include/linux/ppp_defs.h,
-	mdk-stage1/ppp/scripts/chatchat/chatchat.c,
-	mdk-stage1/ppp/scripts/chatchat/README,
-	mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master,
-	mdk-stage1/ppp/svr4/Makedefs,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c,
-	mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h,
-	mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2,
-	mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc,
-	mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c,
-	mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux,
-	mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer,
-	mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux,
-	mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master,
-	mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h,
-	mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c,
-	mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h,
-	mdk-stage1/ppp/pppd/Makefile.linux.makeopt,
-	mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c,
-	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh,
-	mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add,
-	mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h,
-	mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c,
-	mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf,
-	mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h,
-	mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top,
-	mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c,
-	mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c,
-	mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h,
-	mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top,
-	mdk-stage1/ppp/svr4/Makefile.svr4,
-	mdk-stage1/ppp/pppd/plugins/Makefile.linux,
-	mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision
-	import initial ppp sources
-
-2001/06/11  odin
-
-	* standalone/drakproxy: first import of drakproxy
-
-2001/06/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): don't check /usr/bin/urpmi, better check
-	/usr/sbin/urpmi.update
-
-	* commands.pm (grep_): add a missing semi-colon
-
-	* share/compssUsers: remove NIS which is handled by DrakX (titi sucks)
-
-2001/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit,
-	rescue/Makefile: 
-	  - add 'guessmounts' that mimics RH's detecting of partitions when
-	rescue starts
-
-2001/06/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-	* share/po/ru.po, share/po/DrakX.pot: updated Russian file
-
-2001/06/10  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/guessmounts: pixelization (tested!)
-
-	* install_any.pm (g_auto_install): more comments in auto_inst.cfg file
-
-2001/06/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list.i386: rescuept is in /sbin now
-
-	* share/list: rescuept in /sbin now
-
-2001/06/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: don't wait on upping lo interface
-
-	* mdk-stage1/modules.c: fix minor bug detecting when modules are present
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c:
-	i need working random suite for ppp with dietlibc
-
-	* mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two
-	stage1 processes!
-
-2001/06/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-2001/06/05  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (mount): notail in any case
-
-	* tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst,
-	tools/i386/netboot/.cvsignore: menu.lst is now a local file created from
-	the example
-
-	* share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1
-
-	* Makefile: fix
-
-2001/06/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
-	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file
-
-2001/06/01  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: use -FULL postfix for common .c files targetting
-	stage1-full
-
-	* mdk-stage1/stage1.c: minor fix
-
-	* mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs,
-	i want to link against glibc too
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c:
-	
-	  - have strncat behave the same way as in glibc
-	  - declare that we're using the DIETLIBC in include/stdlib.h, so I can
-	change my mind in "dns.c" to handle broken glibc which is not capable of
-	doing name resolution with a static binary
-
-	* mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c,
-	mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c,
-	mdk-stage1/url.c, mdk-stage1/network.h: 
-	  - first draft of adsl support
-	  - get back some code for supporting broken glibc unable to resolve
-	when linked statically
-
-	* mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c,
-	mdk-stage1/dietlibc/lib/tcsetattr.c,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/include/netdb.h,
-	mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe
-	stuff compile better
-
-2001/05/31  daouda
-
-	* bootlook.pm: add runlevel chooser feature
-
-2001/05/31  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/make_rescue_img: check presence of files from list and list.ARCH
-
-	* Makefile (get_needed_files): exit with error message if files from
-	share/list (and
-	share/list.ARCH) are missing
-
-	* install2.pm: hide step formatPartitions when upgrading
-
-2001/05/30  mbadaire
-
-	* mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c,
-	mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile,
-	mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c: 
-	  - allow build on ia64
-	  - have CFLAGS centralized in Makefile.common (should help ports such
-	as alpha)
-	  - better looking sub makefiles
-
-2001/05/30  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile.drakxtools (install): ensure pm's in subdirs don't have
-	/use(diagnostics|vars|strict)/
-
-2001/05/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
-	name for lpr.
-
-2001/05/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* share/compssUsers: add NIS client to network clients
-
-2001/05/29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
-	name for lpr.
-
-2001/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly
-	rewritten..)
-
-2001/05/25  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix
-	bootstrap creation, formatting sequence
-
-	* install_steps_interactive.pm: fix bootstrap information screen back to
-	orig with missing ":" - PPC
-	add hfs support to rescue - PPC, fix bootstrap creation, formatting
-	sequence
-
-2001/05/25  siegel
-
-	* share/po/de.po: updated time
-	moved to UTF-8
-
-2001/05/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-2001/05/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): autoExitInstall set if not replay (was
-	the opposite)
-
-2001/05/23  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/list: add scd0...
-
-2001/05/22  siegel
-
-	* share/po/de.po: updates
-
-2001/05/21  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation
-	of PPC boot CD on x86 platform
-
-2001/05/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: 
-	  - better detect when IP is not good
-	  - error_msg when netmask seems invalid
-	  - don't log too much `guessing netmask'
-
-	* mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits
-	each
-
-2001/05/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed parted that ask for confirmation if partition
-	table is not right (MAXDATA
-	for example), this cause parted to ignore warning.
-	added blank space between partition windows and linux to help resolving
-	above case.
-	fixed hole in partitionning (need testing), use fdisk to get disk
-	geometry and
-	create partition that matches cylinder boundaries (no more
-	approximation).
-	make sure to create all partitions including /home.
-
-2001/05/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers
-	don't write nonsense code to separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/probing.c: unify user notification of network and scsi
-	devices that make load of drivers
-	don't write nonsense code to separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
-	mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c,
-	mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to
-	separate frontend from stage1,
-	but rather, try to do some clever things
-
-	* mdk-stage1/frontend-common.c: plop
-
-2001/05/16  dam's  <damien@mandrakesoft.com>
-
-	* pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png,
-	pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png,
-	pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png,
-	pixmaps/bootdisk.png, pixmaps/services.png: added icons
-
-	* standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot,
-	standalone/draksec, standalone/drakxservices, standalone/drakgw,
-	standalone/XFdrake, standalone/adduserdrake: added icon management
-
-	* my_gtk.pm, interactive.pm: icons management
-
-	* install2.pm: added icons management
-
-	* standalone/draknet: added icon managment
-
-	* pixmaps/printer.png: added icon
-
-2001/05/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added support for /var creation, and more specific
-	package selection for server.
-	Include option support by VERSION file.
-
-2001/05/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h,
-	mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README,
-	mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff
-	and code from stage1
-
-2001/05/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po:
-	updated Turkish file
-
-2001/05/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: fix yet again DrakX.pot making
-
-	* partition_table.pm: re-add reiserfs as it should
-	add xfs
-
-2001/05/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be
-	usefull.
-
-2001/05/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: libresolv deprecated in GLIBC
-	have stage1-full with pcmcia also compile with dietlibc, cool!
-
-	* mdk-stage1/network.c: fix guess netmask
-	configure_net_device is only used internally
-
-	* mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling
-	interface (use of enum rather than guessing single numbers..)
-
-	* mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines
-
-	* mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile
-	with dietlibc, cool!
-	  - build glibc and dietlibc targets
-	  - bzero string buffer before sscanf call (dietlibc implementation)
-	  - verify returns of ioperm so that I can use it in test mode
-
-	* mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/dietlibc/include/sys/io.h,
-	mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia
-	also compile with dietlibc, cool!
-
-	* mdk-stage1/stage1.c: a bit of size reduction plus some language change
-	blurk
-
-	* mdk-stage1/WHY-DIETLIBC: advocate dietlibc
-
-	* mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author
-
-	* mdk-stage1/disk.c: bzero string buffer before sscanf call, security for
-	dietlibc implementation
-
-	* mdk-stage1/network.h: configure_net_device is only used internally
-
-	* mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c: 
-	  - build glibc and dietlibc targets
-	  - bzero string buffer before sscanf call (dietlibc implementation)
-	  - verify returns of ioperm so that I can use it in test mode
-
-	* standalone/drakgw: full path for iptables
-
-	* mdk-stage1/probing.c: allow wait_message calls to be multi-lines
-	nicer layout for PCI detection messages
-	better modules handling interface (use of enum rather than guessing
-	single numbers..)
-
-2001/05/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po, share/po/ar.po: Updated Turkish file
-
-	* share/keyboards.tar.bz2: Added north-african keyboard
-
-	* keyboard.pm: added arabic azerty keyboard
-
-2001/05/15  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile: fix messages to i18n extracting
-
-2001/05/14  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* fs.pm: s|mkxfs|mkfs.xfs|;
-
-2001/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: use new gethostby* interface
-
-	* mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data
-	which provides the busybox
-
-	* mdk-stage1/network.c: Have the wait_message() with the sleep()
-	  - complies to gethostby functions
-	  - add sleep(2) so that net intf is really up before operation
-	  - more logs
-	  - FTP: don't try to close control connection with data socket, erhm
-	:-(
-	  - debug netmask guessing, with stdio-frontend
-
-	* mdk-stage1/Makefile: i can compile slang and newt with dietlibc now
-	every targets build with dietlibc
-
-	* mdk-stage1/make_boot_img: use busybox for my debugging purpose
-
-	* mdk-stage1/tools.c: no need to poll() for data at beginning of
-	load_ramdisk_fd, it was a fix of another problem (bug with file stdio
-	operations with sockets in dietlibc)
-
-	* mdk-stage1/dietlibc/Makefile: build this new dietlibc
-	import new version of dietlibc
-
-	* mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions
-	provided by dietlibc
-
-	* mdk-stage1/url.c: use poll() rather than select(), smaller code size
-
-	* mdk-stage1/stage1.c: we don't use this sucking sash no more
-	we now use `busybox' compiled with the marvellous dietlibc, which
-	provides no less than 73 usefull binaries
-
-	* mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c,
-	mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c,
-	mdk-stage1/dietlibc/include/sys/ipc.h,
-	mdk-stage1/dietlibc/alpha/sendmsg.S,
-	mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c,
-	mdk-stage1/dietlibc/sparc/__testandset.S,
-	mdk-stage1/dietlibc/syscalls.s/open.S,
-	mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h,
-	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S,
-	mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h,
-	mdk-stage1/dietlibc/include/sys/syscall.h,
-	mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c,
-	mdk-stage1/dietlibc/syscalls.s/ptrace.s,
-	mdk-stage1/dietlibc/lib/isprint.c,
-	mdk-stage1/dietlibc/syscalls.s/dietstat.S,
-	mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c,
-	mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h,
-	mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c,
-	mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S,
-	mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c,
-	mdk-stage1/dietlibc/include/sys/sem.h,
-	mdk-stage1/dietlibc/syscalls.s/query_module.S,
-	mdk-stage1/dietlibc/lib/strchr.c,
-	mdk-stage1/dietlibc/syscalls.s/dietfstat64.S,
-	mdk-stage1/dietlibc/syscalls.s/lstat64.S,
-	mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c,
-	mdk-stage1/dietlibc/lib/perror.c,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c,
-	mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c,
-	mdk-stage1/dietlibc/include/utmp.h,
-	mdk-stage1/dietlibc/syscalls.s/sendfile.S,
-	mdk-stage1/dietlibc/syscalls.s/nice.S,
-	mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
-	mdk-stage1/dietlibc/syscalls.s/select.S,
-	mdk-stage1/dietlibc/include/sys/mtio.h,
-	mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S,
-	mdk-stage1/dietlibc/lib/__telldir.c,
-	mdk-stage1/dietlibc/i386/__testandset.S,
-	mdk-stage1/dietlibc/lib/remove.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S,
-	mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c,
-	mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c,
-	mdk-stage1/dietlibc/include/sys/un.h,
-	mdk-stage1/dietlibc/alpha/connect.S,
-	mdk-stage1/dietlibc/include/termios.h,
-	mdk-stage1/dietlibc/lib/sigfillset.c,
-	mdk-stage1/dietlibc/lib/sigismember.c,
-	mdk-stage1/dietlibc/syscalls.s/dietstat64.S,
-	mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c,
-	mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c,
-	mdk-stage1/dietlibc/lib/tcsetpgrp.c,
-	mdk-stage1/dietlibc/sparc/Makefile.add,
-	mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S,
-	mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c,
-	mdk-stage1/dietlibc/include/inttypes.h,
-	mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S,
-	mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c,
-	mdk-stage1/dietlibc/alpha/recvmsg.S,
-	mdk-stage1/dietlibc/syscalls.s/fork.S,
-	mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c,
-	mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S,
-	mdk-stage1/dietlibc/include/features.h,
-	mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c,
-	mdk-stage1/dietlibc/syscalls.s/writev.S,
-	mdk-stage1/dietlibc/lib/fputs.c,
-	mdk-stage1/dietlibc/alpha/sigprocmask.S,
-	mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h,
-	mdk-stage1/dietlibc/syscalls.s/nanosleep.S,
-	mdk-stage1/dietlibc/syscalls.s/creat.S,
-	mdk-stage1/dietlibc/include/sys/sysinfo.h,
-	mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S,
-	mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c,
-	mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c,
-	mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S,
-	mdk-stage1/dietlibc/include/dirent.h,
-	mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c,
-	mdk-stage1/dietlibc/include/net/route.h,
-	mdk-stage1/dietlibc/syscalls.s/exit.S,
-	mdk-stage1/dietlibc/include/pthread.h,
-	mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S,
-	mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c,
-	mdk-stage1/dietlibc/lib/execvp.c,
-	mdk-stage1/dietlibc/syscalls.s/__reboot.S,
-	mdk-stage1/dietlibc/lib/stdin.c,
-	mdk-stage1/dietlibc/syscalls.s/getitimer.S,
-	mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c,
-	mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S,
-	mdk-stage1/dietlibc/sparc/fork.S,
-	mdk-stage1/dietlibc/syscalls.s/__pread.S,
-	mdk-stage1/dietlibc/include/sys/poll.h,
-	mdk-stage1/dietlibc/syscalls.s/personality.S,
-	mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h,
-	mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h,
-	mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c,
-	mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c,
-	mdk-stage1/dietlibc/include/sys/param.h,
-	mdk-stage1/dietlibc/syscalls.s/__getpagesize.S,
-	mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S,
-	mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c,
-	mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h,
-	mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S,
-	mdk-stage1/dietlibc/include/sys/kd.h,
-	mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_yield.S,
-	mdk-stage1/dietlibc/include/sys/mman.h,
-	mdk-stage1/dietlibc/lib/__readdir.c,
-	mdk-stage1/dietlibc/lib/cfgetospeed.c,
-	mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c,
-	mdk-stage1/dietlibc/alpha/reml.S,
-	mdk-stage1/dietlibc/syscalls.s/fcntl.S,
-	mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c,
-	mdk-stage1/dietlibc/syscalls.s/ipc.S,
-	mdk-stage1/dietlibc/syscalls.s/mlockall.S,
-	mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c,
-	mdk-stage1/dietlibc/include/sys/msg.h,
-	mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
-	mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c,
-	mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c,
-	mdk-stage1/dietlibc/include/net/if_arp.h,
-	mdk-stage1/dietlibc/lib/execlp.c,
-	mdk-stage1/dietlibc/syscalls.s/stat64.S,
-	mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h,
-	mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c,
-	mdk-stage1/dietlibc/syscalls.s/fstat64.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_setparam.S,
-	mdk-stage1/dietlibc/include/sys/reboot.h,
-	mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c,
-	mdk-stage1/dietlibc/include/sys/sendfile.h,
-	mdk-stage1/dietlibc/include/sys/syslog.h,
-	mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c,
-	mdk-stage1/dietlibc/syscalls.s/sched_getparam.S,
-	mdk-stage1/dietlibc/lib/vsnprintf.c,
-	mdk-stage1/dietlibc/include/signal.h,
-	mdk-stage1/dietlibc/syscalls.s/pause.S,
-	mdk-stage1/dietlibc/include/arpa/inet.h,
-	mdk-stage1/dietlibc/include/sys/wait.h,
-	mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c,
-	mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c,
-	mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c,
-	mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c,
-	mdk-stage1/dietlibc/lib/__ltostr.c,
-	mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c,
-	mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S,
-	mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c,
-	mdk-stage1/dietlibc/lib/htons.c,
-	mdk-stage1/dietlibc/syscalls.s/sigaltstack.S,
-	mdk-stage1/dietlibc/include/sys/resource.h,
-	mdk-stage1/dietlibc/lib/__stat64_cvt.c,
-	mdk-stage1/dietlibc/lib/localtime.c,
-	mdk-stage1/dietlibc/alpha/seteuid.c,
-	mdk-stage1/dietlibc/syscalls.s/stime.S,
-	mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c,
-	mdk-stage1/dietlibc/ppc/Makefile.add,
-	mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c,
-	mdk-stage1/dietlibc/include/net/if.h,
-	mdk-stage1/dietlibc/include/shadow.h,
-	mdk-stage1/dietlibc/lib/__rewinddir.c,
-	mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c,
-	mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h,
-	mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c,
-	mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S,
-	mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c,
-	mdk-stage1/dietlibc/include/regex.h,
-	mdk-stage1/dietlibc/include/sys/ptrace.h,
-	mdk-stage1/dietlibc/lib/tcdrain.c,
-	mdk-stage1/dietlibc/syscalls.s/lstat.S,
-	mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c,
-	mdk-stage1/dietlibc/lib/random.c,
-	mdk-stage1/dietlibc/syscalls.s/times.S,
-	mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
-	mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S,
-	mdk-stage1/dietlibc/syscalls.s/dietlstat64.S,
-	mdk-stage1/dietlibc/ppc/__testandset.S,
-	mdk-stage1/dietlibc/include/mntent.h,
-	mdk-stage1/dietlibc/include/sys/file.h,
-	mdk-stage1/dietlibc/syscalls.s/fstat.S,
-	mdk-stage1/dietlibc/syscalls.s/llseek.S,
-	mdk-stage1/dietlibc/lib/strsep.c,
-	mdk-stage1/dietlibc/include/sys/stat.h,
-	mdk-stage1/dietlibc/syscalls.s/munlockall.S,
-	mdk-stage1/dietlibc/syscalls.s/setpriority.S,
-	mdk-stage1/dietlibc/include/assert.h,
-	mdk-stage1/dietlibc/include/strings.h,
-	mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c,
-	mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c,
-	mdk-stage1/dietlibc/ppc/__longjmp.S,
-	mdk-stage1/dietlibc/lib/__closedir.c,
-	mdk-stage1/dietlibc/include/sys/signal.h,
-	mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c,
-	mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore,
-	mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h,
-	mdk-stage1/dietlibc/lib/tm_conv.c,
-	mdk-stage1/dietlibc/syscalls.s/reboot.S,
-	mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S,
-	mdk-stage1/dietlibc/syscalls.s/umount2.S,
-	mdk-stage1/dietlibc/syscalls.s/readv.S,
-	mdk-stage1/dietlibc/lib/__fxstat.c,
-	mdk-stage1/dietlibc/include/sys/select.h,
-	mdk-stage1/dietlibc/syscalls.s/syslog.S,
-	mdk-stage1/dietlibc/syscalls.s/sysinfo.S,
-	mdk-stage1/dietlibc/lib/fprintf.c,
-	mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README,
-	mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c,
-	mdk-stage1/dietlibc/syscalls.s/getcwd.S,
-	mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c,
-	mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S,
-	mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S,
-	mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S,
-	mdk-stage1/dietlibc/lib/__opendir.c,
-	mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c,
-	mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c,
-	mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c,
-	mdk-stage1/dietlibc/lib/__getcwd.c,
-	mdk-stage1/dietlibc/include/netinet/in.h,
-	mdk-stage1/dietlibc/lib/shmctl.c,
-	mdk-stage1/dietlibc/syscalls.s/dietlstat.S,
-	mdk-stage1/dietlibc/include/arpa/nameser.h,
-	mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c,
-	mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c,
-	mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S,
-	mdk-stage1/dietlibc/lib/stderr.c,
-	mdk-stage1/dietlibc/syscalls.s/close.S,
-	mdk-stage1/dietlibc/syscalls.s/dietfstat.S,
-	mdk-stage1/dietlibc/include/locale.h,
-	mdk-stage1/dietlibc/syscalls.s/getpriority.S,
-	mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c,
-	mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c,
-	mdk-stage1/dietlibc/include/sys/mount.h,
-	mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S,
-	mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h,
-	mdk-stage1/dietlibc/lib/islower.c,
-	mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c,
-	mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c,
-	mdk-stage1/dietlibc/include/ctype.h,
-	mdk-stage1/dietlibc/include/netdb.h,
-	mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c,
-	mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c,
-	mdk-stage1/dietlibc/syscalls.s/waitpid.S,
-	mdk-stage1/dietlibc/lib/strtoul.c,
-	mdk-stage1/dietlibc/syscalls.s/stat.S,
-	mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc
-
-	* mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers
-
-	* mdk-stage1/dietlibc/include/stdio.h,
-	mdk-stage1/dietlibc/include/stdlib.h,
-	mdk-stage1/dietlibc/include/math.h,
-	mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile
-	with dietlibc
-	import new version of dietlibc
-
-	* mdk-stage1/Makefile.common: new dietlibc binaries location
-
-	* mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc
-	now
-
-	* mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc
-
-	* mdk-stage1/dhcp.c: Have the wait_message() with the sleep()
-	  - add a sleep(2) after ioctl ifupping so that further operation can
-	work normally
-	  - more logs
-
-2001/05/14  kjx
-
-	* share/po/zh_CN.GB2312.po: process untranslated
-
-2001/05/14  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling
-
-2001/05/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed missing package which may be selected on
-	hardware during real install.
-
-	* rescue/tree/etc/oem: added support to change boot entries when invoking
-	oem script.
-	fixed missing SCSI support and driver module loading.
-	fixed missing speficic packages not installed on HW detected.
-
-2001/05/08  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: VBox -> HBox in Embedded mode
-
-	* standalone/mousedrake: code cleaned and debugged
-	added mouse test. Ugly
-
-2001/05/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: fix minor stuff
-	re-include correct layout for [] choices, in a smaller way than before
-
-	* mdk-stage1/tools.c: minor fix
-	needs to poll() for available data before loading ramdisk because ftp
-	transfers would fail in some situations
-
-	* mdk-stage1/init.c: new maxim
-
-	* mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star
-	is printed when last blocks of file are read
-
-	* mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS:
-	----------------------------------------------------------------------
-
-2001/05/08  siegel
-
-	* share/po/de.po: fixed plenty ugly typos
-
-2001/05/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po: updated Brazilian file
-
-2001/05/07  yduret
-
-	* docs/README.devel: fix one typo
-
-	* any.pm, bootloader.pm: updated install_lilo() according to new lilo
-	package
-	(/boot/lilo-{menu,graphic,text})
-
-2001/05/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad output and bad adsl script
-
-2001/05/06  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install2.pm: workaround for msec hang on PPC
-
-2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts
-
-2001/05/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC,
-	don't run xmodmap, PPC SMP routine placeholder
-
-2001/05/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt
-
-2001/04/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c: nicer layout for progressbar and
-	statusreport, when update_progression
-	Provide some description of the drivers
-
-	* docs/HACKING: fix
-	pserver -> ext
-
-	* mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h,
-	mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h,
-	mdk-stage1/modules.c: Provide some description of the drivers
-
-2001/04/30  Pixel  <pixel@mandrakesoft.com>
-
-	* docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/
-
-	* docs/advocacy: fuck'em all
-
-2001/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* docs/README.devel, docs/README: added some more comments for DrakX code
-	source and usage.
-
-2001/04/25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/oem-prepare: fixed use of VERSION file to find language.
-	prepare a oem disk to be used by moving all files that will not be
-	installed by oem (oem-master disk preparation).
-
-	* rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed
-	usage of free space on disk, added NVIDIA packages to install.
-
-	* rescue/tree/etc/oem-server: added missing VERSION file.
-	fixed usage of free space on disk, added NVIDIA packages to install.
-
-	* rescue/tree/etc/oem: added missing autologin package.
-	added option to enable oem mode.
-	added missing VERSION file.
-	fixed usage of free space on disk, added NVIDIA packages to install.
-
-2001/04/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: version is labelled "cooker"
-
-2001/04/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c:
-	integrate fg's fixes for includes
-
-2001/04/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha,
-	rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc
-
-2001/04/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: fix bug that trashes the network config of stage1
-	during stage2, when no DNS is provided
-
-2001/04/18  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: last corrections
-
-	* standalone/draknet, netconnect.pm: last corrections
-	corrected internet connection test, and parameters editing
-
-	* install_steps_gtk.pm: corrected cursor on details
-
-2001/04/18  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE
-	* drakprofile in level 1
-	* swapped tkinter and python-devel
-	* vnc-server in NETWORKING_REMOTE_ACCESS_SERVER
-	* vnc-SVGALIB in level 2
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed embedded
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: restored grub as everything seems fine.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-
-	* install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV
-
-2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* standalone/draknet: fixed typo
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Basque file
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  warly
-
-	* share/rpmsrate: put MAKEDEV at end of line
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed embedded
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: restored grub as everything seems fine.
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-	* install_steps_interactive.pm: fixed missing mouse update in summary.
-
-2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Basque file
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): better ensure
-	'broadcast' insteaf of overriding
-	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
-	means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/17  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: chmoded autologin
-
-2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
-	make sure kernel is selected.
-	fixed parted problem.
-
-	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
-	swap gap.
-	make sure kernel will be selected.
-
-2001/04/17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): set NIS to broadcast
-	when NIS asked. Empty NIS still means no NIS
-
-	* any.pm (setupBootloader): remove a warning
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* any.pm: removed Grub if Embedded
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: minor bug.
-
-	* any.pm: removed Grub if Embedded
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/net_monitor: updated
-	updated
-
-	* network.pm: dhcpd -> dhcpcd
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* netconnect.pm: minor bug.
-	dhcpd -> dhcpcd
-
-	* standalone/draknet: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: added missing rio500 in closure.
-	finally fixed menu by generating /etc/rpm/macros file.
-	added missing LF.
-	now fixed menu problems.
-	try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of
-	fr:fr_FR.
-	really disable server.
-	maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* fs.pm: restored not neccessary to load reiserfs for formating.
-	loading reiserfs module before formatting.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-	* mdk-stage1/TECH-INFOS: update doc
-
-	* share/po/fr.po: fix minor thing
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* standalone/net_monitor: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
-	"fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/16  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: bugfix
-	added update thread
-	corrected bad install package.
-	updated expert mode
-
-	* network.pm, install_steps.pm: corrected bad install package.
-
-	* Xconfigurator.pm: added nice monitor.png
-
-	* tinyfirewall.pm: corrected package installation
-
-	* standalone/net_monitor: updated
-
-	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
-	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
-	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
-	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
-	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
-	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
-	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
-	removed for readd in kb
-
-	* my_gtk.pm: corrected typo
-	added grey fix for contreol-center
-
-	* netconnect.pm: debug
-	corrected bad install package.
-
-2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: fixed standalone error for wacom weirdness.
-	fixed HASH() in /etc/X11/XF86Config*.
-
-	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
-	"fr:fr_FR" for french).
-	fixed to avoid nasty message in wrong places.
-	moved warning message around.
-	fixed wrong LOCALES"...".
-	fixed lang weirdness, fixed minimal size of / partition to be more
-	confortable,
-	fixed default language for starting DrakX after.
-
-2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
-	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
-	XFdrake
-
-2001/04/16  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: remove BURNER from Utilities
-
-	* install_any.pm (g_auto_install): do not take 'mkbootdisk'
-
-2001/04/16  warly
-
-	* share/rpmsrate: lower portsentry
-
-2001/04/15  fabman
-
-	* share/po/es.po: updates
-
-2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix minor typo
-
-2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/gl.po: updated Galician file
-
-2001/04/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
-	Workstation, Server) to make gg happy
-
-2001/04/15  fabman
-
-	* share/po/es.po: updates
-
-2001/04/15  fcrozat
-
-	* share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories
-
-2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fix minor typo
-
-2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files
-
-2001/04/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
-	Workstation, Server) to make gg happy
-
-	* printerdrake.pm (main): restore the "Ok" button for the queues
-	manipulation
-
-	* any.pm (write_passwd_user): fix use of local
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): add an eval
-	around "require log" to keep perl from going totally mad (getting things
-	like v18.843.482 required--this is only v5.6.0)
-
-2001/04/15  yduret
-
-	* bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to
-	mcc normally
-	fix layout & size
-
-2001/04/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected isdn detect display
-
-	* standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7
-
-2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
-	selection of packages.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (naughtyServers): add apache
-
-	* install_gtk.pm (createXconf): ensure the mouse device is created (mainly
-	for auto_inst)
-
-	* install_steps_interactive.pm (exitInstall): fix bad i18n of Replay
-	button (thx2submarine)
-
-2001/04/14  warly
-
-	* share/rpmsrate: lower viavoicemenu to 1 to avoid error message for
-	powerpack boxes without ViaVoice
-
-2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
-	selection of packages.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code
-
-2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to gzip synthesis file.
-	safe guard generation of synthesis file.
-	fixed umask on urpmi list file and generate synthesis file for each
-	hdlist.
-
-	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
-	/mnt/etc/gtk) instead of /etc/gtkrc
-
-	* any.pm (autologin): spurious messages of chksession  -> dave nul
-
-	* interactive_newt.pm (exit): fix the exit code
-	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
-	them exist...)
-	(waitbox): remove spurious '0' in wait_messages
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14  warly
-
-	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
-	and list
-
-2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed to gzip synthesis file.
-	safe guard generation of synthesis file.
-	fixed umask on urpmi list file and generate synthesis file for each
-	hdlist.
-
-2001/04/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
-	/mnt/etc/gtk) instead of /etc/gtkrc
-
-	* any.pm (autologin): spurious messages of chksession  -> dave nul
-
-	* interactive_newt.pm (exit): fix the exit code
-	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
-	them exist...)
-	(waitbox): remove spurious '0' in wait_messages
-
-	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
-	test)
-
-	* Xconfigurator.pm (use vars): fix stew sux
-	(testFinalConfig): nicer stderr handling
-
-	* interactive_gtk.pm (exit): fix the exit code
-
-2001/04/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse
-	setup for PPC
-
-2001/04/14  warly
-
-	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
-	and list
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
-	opened).
-
-2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: Updated Norwegian file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
-	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated po files
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): reverse message
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
-	ru(winkeys), it is redondant
-
-	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
-	* any.pm (ask_users): do not have an empty icon. better not ask for icon
-	if no icon
-
-2001/04/13  siegel
-
-	* share/po/de.po: updates
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
-	opened).
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): reverse message
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
-	ru(winkeys), it is redondant
-
-	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250
-
-	* any.pm (ask_users): do not have an empty icon. better not ask for icon
-	if no icon
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* Xconfigurator.pm: corrected
-	updated
-	updated message
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install_steps_gtk.pm (installPackages): hide Details button sooner
-	(installPackages): do not show button "Details" when no advertising
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* standalone/draknet: message corrected
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated
-	updated message
-
-	* standalone/draknet: message corrected
-	updated
-
-	* netconnect.pm: net_cnx_up/down xritten in neuneu
-
-	* bootlook.pm: embedded = 0 -> local
-
-2001/04/13  fabman
-
-	* share/po/es.po: synchro with EN
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
-	available.
-	fixed very old typo not encountered before;
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* install_steps_gtk.pm (installPackages): do not show button "Details"
-	when no advertising
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add ssh server in Network Computer Server
-	add DATABASES to Database
-	add icons for server
-
-2001/04/13  dam's  <damien@mandrakesoft.com>
-
-	* network.pm: updated wireless configuration
-
-	* netconnect.pm: corrected loop in isdn + other things
-
-	* bootlook.pm: embedded = 0 -> local
-
-	* standalone/draknet: updated
-	added delete event
-
-2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* netconnect.pm: fixed syntax error :-)
-
-	* install_steps.pm, install_steps_gtk.pm: added conditional update-menus
-	if package are installed.
-
-	* install_steps_interactive.pm: added conditional update-menus if package
-	are installed.
-	make sure update-menus is called after installing cups related packages.
-
-2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated
-	Croatian and Swedish files
-
-	* share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po,
-	share/po/is.po, share/po/cs.po: Removed po files with too low leve lof
-	translating ( < 60% )
-	so they are not included on final CD
-
-2001/04/13  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (backtrace): created
-
-	* install_steps_interactive.pm (addUser): remove the setting of
-	$o->{autologin}, now done in any::autologin
-
-	* bootlook.pm: don't use Locale::GetText, use DrakX's i18n
-
-	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
-	/etc/sysconfig/usb as asked by Lord Chmou
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
-	list instead of dying (for 8.0 only, should be switched back to die)
-	(ask_from_listf): display the backtrace when empty list
-
-	* my_gtk.pm (new): make dams happy
-
-	* any.pm (ask_users): add the empty icon
-	(autologin): fix
-
-2001/04/13  warly
-
-	* share/compssUsers: add DATABASES to Database
-	add icons for server
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: remove unnecessary redhat history code
-
-2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed wrong kernel version extraction (typically for
-	upgrade).
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* interactive.pm: removed strict die on empty list.
-
-	* live_install2: added some gtk and gdk_imlib missing variables.
-
-	* live_install: removed gtk variable for data, moved to second script.
-
-	* modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: remove unneeded #define
-
-	* standalone/drakgw: add some rule so later on tinyfirewall will not
-	prevent everything from working
-
-	* share/po/fr.po: minor fix
-	write some ppc translations
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Updated Italian file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* printer.pm: use run_program and remove "require run_program"s
-
-	* my_gtk.pm (main): only accept X (gdk) events key_press, key_release and
-	exposure (so
-	that not to receive motion_notify which would generate focus_out in
-	non-interesting cases)
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): fix the test
-	for empty lists
-	(ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: if neuneu but explicited clicked, don't skip
-	corrected pcmcia driver
-
-2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* common.pm: improved bestMatchSentence2.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* interactive.pm: removed strict die on empty list.
-
-	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: add some rule so later on tinyfirewall will not
-	prevent everything from working
-
-	* share/po/fr.po: write some ppc translations
-	un-dadouize a problem
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Updated Italian file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix no advertising with less
-	than 20MB of packages
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* install_steps_interactive.pm (configureX): fix for X test at install
-	with exotic fonts
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected typo
-	added use bootloader
-
-	* standalone/net_monitor: typo
-
-	* netconnect.pm: if neuneu but explicited clicked, don't skip
-	corrected pcmcia driver
-	corrected typo
-
-	* lang.pm: pixel sux
-
-	* network.pm, standalone/draknet: corrected network connection
-
-	* my_gtk.pm: corrected set_modal
-
-2001/04/12  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: removed Cancel of Summary.
-	fixed ask printer configuration.
-
-	* common.pm: improved bestMatchSentence2.
-
-	* detect_devices.pm: fix Hewlett-Packard to HP in case.
-
-	* standalone/printerdrake: never ask to configure a printer in standalone.
-
-	* printerdrake.pm: automatically add a queue if nothing exists.
-	fixed ask to configure a printer.
-
-	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
-	packdrake.
-
-2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: un-dadouize a problem
-	sync
-
-2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
-	share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po,
-	share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po,
-	share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
-	share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po,
-	share/po/id.po: Updated Chinese file
-
-	* share/po/it.po: Updated Italian file
-	Updated Chinese file
-
-2001/04/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix no advertising with less
-	than 20MB of packages
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize):
-	  - when not_edit and empty list, die.
-	  - when not_edit and single element list, don't display that entry.
-
-	* install_steps_interactive.pm (configureX): fix for X test at install
-	with exotic fonts
-
-	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"
-
-	* modules.pm (configure_pcmcia): better handling for not running cardmgr
-	many times
-	(configure_pcmcia): always run cardmgr so that it is run even if stage1
-	did create a /var/run/stab. This is just a try :-/
-
-2001/04/12  siegel
-
-	* share/po/de.po: new german version
-
-2001/04/12  yduret
-
-	* bootlook.pm: added some stuff
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/12  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected typo
-	added use bootloader
-
-	* netconnect.pm: corrected typo
-
-2001/04/12  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/12  siegel
-
-	* share/po/de.po: new german version
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: tooltips
-
-	* netconnect.pm: updated
-
-	* my_gtk.pm: no setmodal 0 if wizard
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (reallyChooseGroups): relook
-
-	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
-	big
-
-	* share/compssUsers: adapt for new profile choosing layout
-
-2001/04/11  yduret
-
-	* bootlook.pm: bug fix in autologin
-
-2001/04/11  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: tooltips
-
-	* bootlook.pm: updated
-	corrected
-
-	* tinyfirewall.pm: installation of package : not at the same place
-
-	* netconnect.pm: updated
-	added driver for pcmcia, corrected eth conf for pppoe
-
-2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added missing LD_LOADER for calling rpm.
-
-	* printerdrake.pm: fixed probe on kernel 2.4.
-	make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on
-	upgrade.
-
-	* detect_devices.pm: avoid need of shell for live upgrade on serial_probe
-	(removed 2>/dev/null which
-	is not necessary).
-	fixed printer probe (usb and parallel).
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* lang.pm: added missing LD_LOADER reference and remove old code
-	commented.
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: unfuzzyize
-	sync with new msg in services.pm and compssUsers
-	sync with pablo update
-	fixes of translations
-	write the shitload of untranslated and fuzzy msg
-
-	* standalone/tinyfirewall: i18n title
-
-	* services.pm: have many more services tooltipped from here so we can get
-	translations afterwards
-
-	* share/compssUsers: fix typos of rpmsrate groups
-
-	* standalone/drakgw: kosmetik
-	do i18n for title also
-
-2001/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: Added reference to netscape-chinese_big5 file
-
-	* share/po/DrakX.pot, share/po/wa.po: Updated Walloon file
-	Updated po files
-	Updated Slovak, Walloon and Polish files
-
-	* share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
-	share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po,
-	share/po/ca.po, share/po/cs.po: Updated po files
-	Updated Slovak, Walloon and Polish files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po,
-	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po,
-	share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/af.po: Updated po files
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* share/compssUsers: adapt for new profile choosing layout
-
-	* Makefile: take cardmgr-*
-
-	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
-	big
-	translate the ``path'' in profile selection
-
-	* share/po/i18n_compssUsers: relooking
-
-	* any.pm (setupBootloader): translate the bootloaders to use
-	(setupBootloader): nicer look&feel
-
-	* install_any.pm (fsck_option): add a closing ``"'' so that strings to
-	i18n extraction works
-	(fsck_option): add a closing ``"'' so that strings to i18n extraction
-	works
-	(check_prog): make it work
-
-	* install_steps_gtk.pm (reallyChooseGroups): relook
-	(installPackages): pressing "Details" gives you more detailed info
-	(reallyChooseGroups): start relooking
-	(installPackages): don't display advertising if less 20MB of packages
-	translate the ``path'' in profile selection
-
-2001/04/11  warly
-
-	* share/compssUsers: Add descr for servers
-
-2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* services.pm: have many more services tooltipped from here so we can get
-	translations afterwards
-
-	* share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-	* share/compssUsers: fix typos of rpmsrate groups
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-
-	* diskdrake.pm (More): fix exception relaunching
-
-	* install_any.pm (check_prog): make it work
-
-	* any.pm (setupBootloader): nicer look&feel
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* Makefile: take cardmgr-*
-
-2001/04/11  fabman
-
-	* share/po/es.po: updated spanish .po file
-
-2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make printer devices more accurate.
-	removed limitation to only one port probed
-
-	* mouse.pm: fix wacom usb tablet
-
-	* standalone/printerdrake: added missing take into account of
-	/etc/modules.conf
-
-	* detect_devices.pm: fixed printer probe (usb and parallel).
-
-2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: write the shitload of untranslated and fuzzy msg
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
-	  - completly remove po's (will be getFile'd)
-	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
-	* standalone/drakboot: make it work (why was bootloader::install
-	commented?)
-
-	* share/aliases: add rmmod -> insmod_
-
-	* lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-	* Makefile: take cardmgr-*
-
-	* install_any.pm (check_prog): make it work
-	(check_prog): if a prog isn't available, try to fetch it via getFile
-	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
-	stage2
-	to allow a getAndSaveFile.
-	(getAndSaveFile): if only one arg is given, assume the name is the same
-
-	* standalone/XFdrake: fix bug for running xfs
-
-	* any.pm (setupBootloader): nicer look&feel
-
-	* diskdrake.pm (More): fix exception relaunching
-	check resize_reiserfs is there or get it
-
-	* run_program.pm (rooted): don't call install_any::check_prog if rooted
-	in install, call install_any::check_prog to allow shadow progs which are
-	fetched when needed via getFile
-
-	* share/list: remove rmmod (is now a symlink)
-
-2001/04/11  siegel
-
-	* share/po/de.po: updated german version
-
-2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: Updated Catalan file
-
-2001/04/10  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: 
-	  - fix wiz_*.png removing
-	  - fix copying cardmgr* which included cardmgr.o
-
-2001/04/11  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
-	  - completly remove po's (will be getFile'd)
-	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)
-
-	* standalone/XFdrake: fix bug for running xfs
-
-	* diskdrake.pm: check resize_reiserfs is there or get it
-
-	* share/aliases: add rmmod -> insmod_
-
-	* install_any.pm (check_prog): if a prog isn't available, try to fetch it
-	via getFile
-	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
-	stage2
-	to allow a getAndSaveFile.
-	(getAndSaveFile): if only one arg is given, assume the name is the same
-
-	* share/list: remove rmmod (is now a symlink)
-
-	* run_program.pm: in install, call install_any::check_prog to allow shadow
-	progs which are
-	fetched when needed via getFile
-
-	* lang.pm (get_x_fontset): special cases for some big (size) fonts
-
-2001/04/10  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad network restart
-
-	* my_gtk.pm: corrected bad font
-
-	* network.pm: get rid of ifcfg-
-	minor correction
-
-2001/04/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed selection of CDs.
-
-	* devices.pm: added input/event class of devices (necessary for usb wacom
-	at install)
-
-2001/04/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
-	mdk-stage1/mkinitrd_helper/Makefile: 
-	  - honour quiet mode at boot time
-	  - fake modprobe to shut up kmod
-
-	* bootlook.pm: do not use french in i18n'ed msg yvounet!!
-
-	* standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth
-	interoperation with bastille-firewall
-
-2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: Updated Czech file
-	Updated po files
-
-	* share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated
-	Indonesian, Japanese, Korean and Vietnamese files
-	Updated po files
-
-	* share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing
-	translatable string
-	Updated po files
-
-	* share/po/ca.po: Updated Catalan file
-	Updated po files
-
-	* share/locales.tar.bz2: Added missing file for Vietnamese
-
-	* share/po/bg.po: Updated Bulgarian file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po,
-	share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files
-
-2001/04/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq
-	'')
-	(create_boxradio): handle double_click
-	(ask_from_entries_refW): use radio boxes instead of list/clist if small
-	number
-	of choices
-	(create_ctree): handle single click on node opens the node
-
-	* my_gtk.pm: create and use gtkset_tip
-	(_create_window): XSetInputFocus done only on expose_event of the
-	topmost window
-	(new): ensure only one modal
-
-	* Xconfigurator.pm (main): have an "Ok" button to leave
-
-	* install_steps_gtk.pm: use gtkset_tip
-	(choosePackagesTree): fix "Show automatically selected packages"
-	create and use gtkset_tip
-
-	* Makefile: 
-	  - fix wiz_*.png removing
-	  - fix copying cardmgr* which included cardmgr.o
-
-2001/04/10  warly
-
-	* share/rpmsrate: add viavoicemenu_{us,gr,fe}
-
-2001/04/10  yduret
-
-	* bootlook.pm: grub/lilo mode
-
-2001/04/10  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad network restart
-
-	* my_gtk.pm: corrected bad font
-
-	* network.pm: get rid of ifcfg-
-	minor correction
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: typo
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
-	size as the check is done before rounding.
-
-	* bootloader.pm (install_grub): altconfigfile only if /boot is not
-	reiserfs :-/
-
-	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
-	modules.cz)
-
-	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
-	based on pciusbtable
-
-	* share/compssUsers, share/rpmsrate: 
-	  - SOUND is now a flag
-	  - AUDIO is the group
-
-2001/04/09  siegel
-
-	* tinyfirewall.pm: i18n fixes
-
-2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixes of grub installation using hd.img
-	fix the fix for loopback mounting of hd.img.
-
-	* Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth.
-
-	* pkgs.pm: changed transaction error management this way: if a transaction
-	fails, DrakX
-	tries to make as many transaction as there are package that have failed
-	to be
-	installed (this means one transaction of only one package). This help
-	installing
-	most package that are correct (as a transaction that failed cause all
-	remaining
-	package to be not installed).
-
-2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: 8.0rc -> 8.0
-
-	* rescue/tree/etc/oem: fix english thanks to Kevin
-
-	* standalone/drakgw: do not die when an initscript returns non-0
-	(initscripts too buggy)
-
-2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Danish file
-
-	* any.pm: changed  ISO_8859-1 TO ISO-8859-1
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
-	use it for kdm message
-
-	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
-	size as the check is done before rounding.
-
-	* bootloader.pm (install_grub): altconfigfile only if /boot is not
-	reiserfs :-/
-
-	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
-	modules.cz)
-
-	* install2.pm (main): sets umask (seems like default one is no more 022,
-	kernel change?)
-
-	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
-	(especially for abnt2 (br))
-
-	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
-	based on pciusbtable
-
-	* share/compssUsers, share/rpmsrate: 
-	  - SOUND is now a flag
-	  - AUDIO is the group
-
-	* lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09  siegel
-
-	* share/po/de.po: fixes
-
-	* Xconfigurator.pm: fixed i18n bug
-
-2001/04/09  yduret
-
-	* standalone/tinyfirewall: button policy (thx gc)
-
-	* standalone/drakgw: deyvounification : remove some un-useful comments in
-	code
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected
-
-	* standalone.pm: install function now returns the return value of the
-	system.
-
-	* netconnect.pm: corrected buggy cable
-	removed buggy modem screen repetition
-
-2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
-	applied).
-	fixed cancel support.
-	added conditional restart of gpm on mouse configuration change.
-
-	* fs.pm: removed notail option for reiserfs.
-
-	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
-	DrakConf only).
-
-	* install_any.pm: added missing package to copy.
-
-	* rescue/tree/etc/oem: fixes of grub installation using hd.img
-	fix the fix for loopback mounting of hd.img.
-	fixed hd.img access right.
-	make kernel22 installed for every oem install...
-	moved some package to closure instead of installed.
-	added some missing packages.
-	added nolock option for nfsmount.
-	added missing package to copy.
-
-2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton
-
-	* mdk-stage1/Makefile: 8.0beta -> 8.0rc
-
-	* standalone/drakgw: fix for when there is an already existing rc.firewall
-	complies with old format of drakgw so that upgrades will work
-
-	* rescue/tree/etc/oem: fix english thanks to Kevin
-
-2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* any.pm: changed  ISO_8859-1 TO ISO-8859-1
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
-	use it for kdm message
-
-	* interactive.pm (ask_from_treelistf): make it behaves correctly when
-	"cancel" is clicked
-
-	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
-	(especially for abnt2 (br))
-
-	* install2.pm (main): sets umask (seems like default one is no more 022,
-	kernel change?)
-	(main): log the umask
-
-	* devices.pm (entry): add hd[ijkl]*
-
-	* bootloader.pm (install_lilo): better handling of map-drive (there's not
-	always only 2 disks!)
-
-	* lang.pm (load_po): sets $lang::charset to the charset used in the po
-
-2001/04/09  siegel
-
-	* share/po/de.po: fixes
-
-2001/04/09  yduret
-
-	* standalone/drakboot: added lilo/grub
-
-	* bootlook.pm: added lilo/grub mode
-
-2001/04/09  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: removed use install_any
-
-	* tinyfirewall.pm: corrected
-
-	* netconnect.pm: corrected buggy cable
-	removed buggy modem screen repetition
-	corrected bad bug when creating new profile
-
-	* standalone.pm: install function now returns the return value of the
-	system.
-
-	* Makefile: removed install_any
-
-2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
-	applied).
-	fixed cancel support.
-	added conditional restart of gpm on mouse configuration change.
-
-	* rescue/tree/etc/oem: fixed hd.img access right.
-	make kernel22 installed for every oem install...
-	moved some package to closure instead of installed.
-	added some missing packages.
-	added nolock option for nfsmount.
-	added missing package to copy.
-
-	* fs.pm: removed notail option for reiserfs.
-
-	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
-	DrakConf only).
-
-	* printer.pm: added Till patch for printer (raw queue and PostScript
-	queue).
-
-	* install_any.pm: added missing package to copy.
-
-2001/04/09  kjx
-
-	* share/po/zh_CN.GB2312.po: translate before 8.0 release
-
-2001/04/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): log the umask
-
-	* interactive.pm (ask_from_treelistf): make it behaves correctly when
-	"cancel" is clicked
-
-	* devices.pm (entry): add hd[ijkl]*
-
-	* bootloader.pm (install_lilo): better handling of map-drive (there's not
-	always only 2 disks!)
-
-2001/04/09  yduret
-
-	* bootlook.pm: fix, added lilo/grub frame
-	fixed till bug
-
-2001/04/08  dam's  <damien@mandrakesoft.com>
-
-	* rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get
-	rid of kisdn
-
-	* tinyfirewall.pm: updated
-	added package installation
-
-	* netconnect.pm: get rid of kisdn
-	updated
-	no more askwarn in wizard mode
-	updated
-
-	* standalone/tinyfirewall, standalone/drakgw, my_gtk.pm,
-	netconnect_consts.pm: updated
-
-	* standalone/net_monitor: removed Data::Dumper
-	typo
-
-	* standalone/draknet: updated
-	typo
-	corrected bad isdn field
-
-2001/04/08  daouda
-
-	* share/rpmsrate: increase quanta weight .
-
-2001/04/08  fabman
-
-	* share/po/es.po: updated spanish .po files
-
-2001/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: correct my mistakes on removing some modules from stage1 and
-	stage2 (-> remove only from stage1)
-
-2001/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/compssUsers.desktop, standalone/draknet: Fixed some english typos
-
-	* standalone/net_monitor, netconnect.pm: Some English changes
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Fixed some english typos
-	Updated pot file and various po files
-
-2001/04/08  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (write): remove debugging info :-(
-
-	* bootloader.pm (suggest): add option "quiet" to the kernel in fb
-	(requested by chmou)
-
-	* install_steps.pm (afterInstallPackages): remove setting of kde charset
-	in kdeglobals (kde is a grown-up now)
-
-2001/04/08  siegel
-
-	* share/po/de.po: new german version
-	updates
-
-2001/04/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo
-	typo
-	net_monitor incorporation
-
-	* standalone/net_monitor, Makefile.config: net_monitor incorporation
-
-2001/04/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po: updated Croatian files
-
-	* share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot,
-	share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and
-	Walloon files
-
-2001/04/07  warly
-
-	* share/compssUsers: PCL-CVS release v2_9_9
-	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
-	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
-	In directory .:
-	              Modified                compssUsers
-	In directory po:
-	patched       Up-To-Date              po/DrakX.pot
-	patched       Up-To-Date              po/ca.po
-	patched       Up-To-Date              po/de.po
-	patched       Up-To-Date              po/hr.po
-	patched       Up-To-Date              po/id.po
-	patched       Up-To-Date              po/it.po
-	patched       Up-To-Date              po/ja.po
-	patched       Up-To-Date              po/ko.po
-	patched       Up-To-Date              po/sp.po
-	patched       Up-To-Date              po/sr.po
-	patched       Up-To-Date              po/vi.po
-	patched       Up-To-Date              po/wa.po
-	
-	  --------------------- End ---------------------
-	  -- last cmd: cvs -f update -d -P --
-
-	* share/rpmsrate: PCL-CVS release v2_9_9
-	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
-	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
-	In directory .:
-	              Modified                rpmsrate
-	
-	  --------------------- End ---------------------
-	  -- last cmd: cvs -f update -d -P --
-
-2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-
-2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: use jeff's suggestions to remove some old stuff
-	Sun Happy Meal only for Sparc
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-	
-	  - do not print warning when we are in AUTOMATIC and insmod failed
-	because of file-not-found in mar file (raid cards, etc)
-	  - print "please include msg from Alt-F3" for this warning message to
-	ease further support
-	  - print pci entry of cards found in te logs
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
-	mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files
-
-	* share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files
-
-2001/04/06  siegel
-
-	* share/po/de.po: updates
-
-2001/04/06  yduret
-
-	* standalone/drakgw: swap cancel/configure button
-
-2001/04/06  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: dead code
-
-	* standalone/net_monitor: updated
-
-	* netconnect.pm: be quiet
-
-2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
-	fixed if label does not exists and grub refuse to read.
-
-	* install_steps_interactive.pm: fixed typo for cups checking of
-	installation.
-	fixed "No printer" after configuring cups for remove server.
-	added log for CD medium chosen par user.
-
-	* pkgs.pm: added killing on child process of transaction that have been
-	detached (typically
-	with pid > transaction_pid and parent is 1).
-
-2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - correct yvounetification in i18n stuff
-	  - remove some remaining debugging printings
-	  - add a bit more of explanations when starting drakgw in wizard mode
-
-	* modules.pm: re integrate some TR net cards
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
-	
-	  - do not print warning when we are in AUTOMATIC and insmod failed
-	because of file-not-found in mar file (raid cards, etc)
-	  - print "please include msg from Alt-F3" for this warning message to
-	ease further support
-	  - print pci entry of cards found in te logs
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Thai file
-	Updated pot file
-
-2001/04/06  yduret
-
-	* standalone/drakgw: swap cancel/configure button
-
-2001/04/06  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: addde tk like routines
-
-	* netconnect.pm: be quiet
-	correctedInternetAccessTye and ADSLType
-
-	* Makefile: iCorrected missing file install_any.pm. pixel sux.
-
-	* standalone/draknet2: dead code
-
-	* standalone/net_monitor: updated
-	updated
-	updated
-	updated
-	updated
-	added
-
-	* pixmaps/net_d.png, pixmaps/net_c.png: added
-
-	* share/logo-mandrake.png: new icon
-
-2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: fixed if label does not exists and grub refuse to
-	read.
-
-	* install_steps_interactive.pm: fixed typo for cups checking of
-	installation.
-	fixed "No printer" after configuring cups for remove server.
-	added log for CD medium chosen par user.
-
-	* pkgs.pm: added killing on child process of transaction that have been
-	detached (typically
-	with pid > transaction_pid and parent is 1).
-
-2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Thai file
-	Updated pot file
-
-2001/04/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
-	every modules.cz except the
-	biggest one
-
-	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
-	and use it
-
-	* install_any.pm: add write_fstab
-	create install_any::write_fstab and use it
-
-2001/04/06  yduret
-
-	* bootlook.pm: minor fix
-
-	* standalone/drakgw: recoded a embedded && gtk mode
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (fs_options): created (gets codepage and iocharset)
-
-	* common.pm (if_): better logging of the error
-
-2001/04/06  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
-	every modules.cz except the
-	biggest one
-
-	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
-	and use it
-
-	* install_any.pm: add write_fstab
-	create install_any::write_fstab and use it
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakboot: 
-	  - fix getting result of fsedit::hds
-	  - cleanup
-
-	* lang.pm (fs_options): created (gets codepage and iocharset)
-
-	* common.pm (if_): better logging of the error
-	(getVarsFromSh): fix for AA="" inspired by chmou the Great (but the
-	Great
-	what?)
-
-	* bootloader.pm (install_grub): small fix
-	(install_lilo): fix lilo's dumbness (when lilo warns about not the first
-	drive, it usually fails)
-
-	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-	* install_steps_interactive.pm (addUser): default autologin to first user
-	in beginner
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (autologin): fix
-	ask for autologin
-
-	* install_steps_interactive.pm: ask for autologin
-	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
-	was used. Better have a look at /proc/cmdline
-
-	* bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about
-	not the first drive, it usually fails)
-
-	* pkgs.pm, share/rpmsrate: 
-	  - s/PCI/HW/
-	  - add rio500
-
-	* install_any.pm (kernelVersion): fix enormous stupid typo
-
-	* common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great
-	(but the Great
-	what?)
-
-	* install_steps.pm (exitInstall): oups, report_bug is no more in
-	commands::
-
-	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
-	automatically selected
-	packages' to go along with the new description
-
-	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
-	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
-	* install_any.pm (kernelVersion): fix enormous stupid typo
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* install_steps.pm (exitInstall): oups, report_bug is no more in
-	commands::
-	(configureXBefore): fix the xkb verification (was broken for things like
-	``de(nodeadkeys)'')
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* any.pm: ask for autologin
-
-	* fs.pm (format_reiserfs): quietly format reiserfs
-
-	* commands.pm: 
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* install_steps_interactive.pm: ask for autologin
-	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
-	was used. Better have a look at /proc/cmdline
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* share/rpmsrate: 
-	  - add ldetect
-	  - the default Aurora chose is the categorizing one
-
-2001/04/05  siegel
-
-	* share/po/de.po: fixed typo
-
-2001/04/05  yduret
-
-	* bootlook.pm: fix pablo mess
-	install autolgin just if we want to autolog :)
-
-2001/04/05  dam's  <damien@mandrakesoft.com>
-
-	* ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure
-	vs msec.
-
-	* my_gtk.pm: added gtksize
-
-2001/04/05  fcrozat
-
-	* share/rpmsrate: No longer propose nautilus-mozilla (required by
-	nautilus)
-	propose nautilus-trilobite (for Eazel services)
-
-2001/04/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
-	automatically selected
-	packages' to go along with the new description
-
-	* commands.pm, install_steps_interactive.pm, install_any.pm: 
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-	* fs.pm (format_reiserfs): quietly format reiserfs
-
-	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
-	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')
-
-	* share/rpmsrate: 
-	  - add ldetect
-	  - the default Aurora chose is the categorizing one
-
-	* install_steps.pm (configureXBefore): fix the xkb verification (was
-	broken for things like ``de(nodeadkeys)'')
-	  - move report_bug in install_any
-	  - g_auto_install generates the auto_inst.cfg string without output'ing
-	it
-
-2001/04/05  siegel
-
-	* share/po/de.po: fixed typo
-
-2001/04/05  yduret
-
-	* bootlook.pm: fix pablo mess
-	install autolgin just if we want to autolog :)
-
-2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: make sure to insmod parport_probe alone as it is not
-	available in 2.4 kernel and
-	this this not a problem (silent error).
-	added complete callback to check queue name under cups does contains
-	only letters, numerics or underscore.
-
-	* install_steps_interactive.pm: fixed printer description in summary.
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure
-	to remove 32 bits depth
-	for such card.
-
-	* detect_devices.pm: fixed parport probe for printer under 2.4 kernel.
-
-	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
-	some times.
-
-	* printer.pm: added die on error of lpadmin.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (tv): add ultracam & usbvideo
-	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
-	skip them
-	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
-	skip them
-
-	* install_any.pm (kernelVersion): cleanup
-
-2001/04/04  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_any.pm: kernelVersion mods for PPC
-
-2001/04/04  daouda
-
-	* share/rpmsrate: add gatos for ati tv card .
-
-2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* share/rpmsrate: added SCANNER and PHOTO groups
-
-2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install: unset locale environment for safety
-
-	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
-	(needed for live upgrade so
-	that error message are not printed)
-
-	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
-	some times.
-
-	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
-	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): better handling for tv, photo and scanner
-
-	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
-	stage1, so skip them
-	  - add photo, tv and scanner
-	  - add pegasus and kaweth modules
-
-2001/04/04  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo
-
-2001/04/04  daouda
-
-	* share/rpmsrate: add gatos for ati tv card .
-	reput klyx but in lower weight (2)
-	removed klyx from rpmsrate (bad idea according to pixel )
-	add klyx in install "Office KDE"
-
-2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install: unset locale environment for safety
-
-	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
-	(needed for live upgrade so
-	that error message are not printed)
-
-	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share
-
-	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share
-
-	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
-	is called.
-
-	* install_steps.pm: disable frame buffer for Matrox cards.
-
-	* install_any.pm: fixed multiple wait message (looking+finding packages)
-
-2001/04/04  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): better handling for tv, photo and scanner
-
-	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
-	stage1, so skip them
-	  - add photo, tv and scanner
-	  - add pegasus and kaweth modules
-
-	* share/compssUsers: remove TV (it is a hardware flag)
-
-2001/04/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: keep mount point configuration trhough multi-passes of
-	diskdrake and others.
-
-	* Xconfigurator.pm: prefer XF3 for SiS card.
-
-2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file
-
-2001/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: do not use isSpecial which should only be used on
-	partitions
-	(main): do not have loopback pseudo hd in hds out of diskdrake
-
-	* modules.pm (load_raw): add the require install_any
-
-	* share/rpmsrate: restore Aurora (i really don't understand what i've done
-	with flag AURORA a month ago) to a simple behaviour
-
-	* install_steps_interactive.pm (choosePackages): do not make a special
-	case for upgrades (was: select the
-	min size, which was on contradiction with profile selection)
-
-	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
-	* standalone/mousedrake: fix horrible error (using an undefined $o)
-
-	* share/list: add back mkreiserfs
-
-	* standalone/XFdrake: don't start xfs if skiptest
-
-	* fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains
-	only true
-	hard drives (not pseudo one like raid, loopback and lvm)
-
-	* bootloader.pm (suggest): trap strange error. Should not really fix the
-	pb
-
-	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
-	detetection
-
-	* lang.pm (charset): fix for chineese which have charset in the name
-
-	* Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
-	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
-	dependencies"
-
-	* install_any.pm (setPackages): don't preselect profiles in upgrade
-	(setPackages): handle Flag:<theflag>
-	(setPackages): install kernel22 if install kernel is a 2.2
-
-	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
-	(didn't
-	propose to format it)
-	protect the loading of module lvm-mod
-
-2001/04/03  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button
-	emulation
-
-2001/04/03  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: a lot of bugfixs
-	corrected bad flag test
-	corrected bad priority
-
-	* standalone/draknet: typo
-	bug fixes
-	removed debugging messages and Data::Dumper
-	corrected bad flag test
-
-2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file
-
-2001/04/03  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_raw): add the require install_any
-
-	* share/rpmsrate: restore Aurora (i really don't understand what i've done
-	with flag AURORA a month ago) to a simple behaviour
-
-	* lang.pm (charset): fix for chineese which have charset in the name
-
-	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
-	detetection
-
-	* Makefile: no more special case for mkreiserfs (can be done via -v 1)
-
-	* install_steps_interactive.pm (choosePackages): do not make a special
-	case for upgrades (was: select the
-	min size, which was on contradiction with profile selection)
-
-	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2
-
-	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
-	dependencies"
-
-	* install_any.pm (setPackages): don't preselect profiles in upgrade
-	(setPackages): handle Flag:<theflag>
-	(setPackages): install kernel22 if install kernel is a 2.2
-
-	* share/list: add back mkreiserfs
-
-	* standalone/XFdrake: don't start xfs if skiptest
-
-	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
-	(didn't
-	propose to format it)
-	protect the loading of module lvm-mod
-
-2001/04/02  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: corrected petite's mistake
-
-	* netconnect.pm: protecting against non existent files
-
-2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix
-	comply to all.kernels policy
-
-	* tools/make_mdkinst_stage2: fix remove of alternate cz modules
-
-2001/04/02  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/cs.po: Updated Czech file
-
-	* lang.pm: codepage option to mount requires only numeric values, eg "437"
-	and not "cp437"
-	Changed accordingly in the lists
-
-	* share/rpmsrate: Install latin2 Postscript fonts for latin2 locales,
-	install fonts-ttf-thai for Thai locale
-
-2001/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile: small cleanup for pcmcia_probe.c
-
-	* tools/Makefile (install): s/-r/-rf/
-
-	* install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/
-	(setPackages): install imwheel if nbuttons > 3
-
-	* c/Makefile.PL: small cleanup for pcmcia_probe.c
-	don't use pcmcia_probe.o from stage1, better compile it here, otherwise
-	perl-install require mdk-stage1 to do compiled => circular dependency
-
-	* Makefile: ignore dams or at least dams errors
-
-	* c/.cvsignore: add pcmcia_probe.c
-
-2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/make_rescue_img: fix pixelization (aka take advantage of
-	all.kernels/.main)
-
-2001/04/02  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile (install): s/-r/-rf/
-
-2001/03/30  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/Makefile (install): fix the globbing for packdrake.pm and
-	rpmtools.pm
-
-2001/03/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/drvinst: test for "Card:" and not install, some videoboards are
-	not reported as DISPLAY_VGA :-(
-
-	* tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img,
-	mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more
-	than one boot kernel :-)
-
-	* rescue/list.i386: add reiserfsck
-
-2001/03/29  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: bad message at the end if kernel2.4
-
-	* netconnect.pm: added missing Device in Ethx when saving/loading
-
-	* standalone/draknet: translation
-
-2001/03/28  dam's  <damien@mandrakesoft.com>
-
-	* standalone/tinyfirewall: typo
-
-	* interactive_gtk.pm: corrected pixel shit if embedded
-
-	* standalone/draksec: embedded mode
-
-	* standalone/draknet: corrected gtkpng in gtkwpm
-	added translation
-
-	* bootlook.pm: cute button box
-
-	* tinyfirewall.pm: workaround to make it work if kernel 2.4
-
-2001/03/28  fcrozat
-
-	* share/rpmsrate: gmc is back in standard GNOME install, for people with
-	existing home
-
-2001/03/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for
-	standalone XFdrake and mousedrake (multi-mouse and
-	correct probe (USB)).
-
-	* Xconfig.pm: re-fix mouse fix.
-	fixed wrong mouse probe.
-	fixed for standalone XFdrake and mousedrake (multi-mouse and
-	correct probe (USB)).
-
-	* Xconfigurator.pm: restore multi mouse support for XF3.
-
-2001/03/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish,
-	Finnish, Croatian and Turkish files
-
-	* share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files
-
-	* share/po/az.po: Updated Azeri and Danish files
-
-	* share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
-	files
-	Updated Finnish, Korean and Slovak files
-
-	* share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
-	files
-	Updated Azeri and Danish files
-
-2001/03/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: add fstab in the log
-
-	* interactive_gtk.pm: better default_size setting
-
-	* commands.pm: fix typo
-	add fstab in the log
-
-	* install_gtk.pm (test_mouse): ensure the test mouse is not too big
-
-2001/03/28  warly
-
-	* share/rpmsrate: add some commercial apps
-
-2001/03/27  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: added kill USR2 before main
-
-	* share/help.png: changed help button
-
-	* share/help.xpm: changed help
-
-	* tinyfirewall.pm: workaround to make it xork.
-
-2001/03/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
-	* Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported
-	currently.
-
-2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po,
-	share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po,
-	share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese,
-	Indonesian, Japanese, Korean and Walloon files
-	changed i18n_compssUsers to make "path" i18n'able
-
-2001/03/27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: warnAboutNaughtyServers
-	(setPackages): default profiles selection to GNOME, KDE, CONFIG
-
-	* install_steps_interactive.pm: warnAboutNaughtyServers
-	(summary): fix displaying of printer configured
-
-	* pkgs.pm: warnAboutNaughtyServers
-
-	* install_steps_gtk.pm (installPackages): catch the no png file exception
-	(in case warly is dumb again)
-
-	* my_gtk.pm: try to fix displaying in draksec
-	(create_box_with_title): save the box_size in field "box_size"
-
-	* install2.pm, any.pm: remove use of Bastille. get back to the good state
-	we had :)
-
-	* interactive_gtk.pm: try to fix displaying in draksec
-
-	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
-	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
-	LOCALES"zh"
-	  - raise WindowMaker
-	  - add xfce
-	  - am-utils is a server
-	  - raise some stuff in CONFIG to have stuff there
-	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
-	  - DrakConf from 5 to 4
-
-	* lang.pm (langsLANGUAGE): give the list of languages
-
-2001/03/27  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm: change verbage on bootloader warning
-
-2001/03/27  siegel
-
-	* share/po/de.po: minor typo-fixes
-
-2001/03/27  dam's  <damien@mandrakesoft.com>
-
-	* share/help.png: changed help button
-
-	* share/help.xpm: changed help
-
-2001/03/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now
-	postponed at end of install
-	and only if rpm-4.0 or above has been installed.
-
-	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.
-
-	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added
-	support for two mice (laptop). The second mice is generally PS/2 as
-	probe can says it is present.
-
-2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers
-
-2001/03/27  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm, install2.pm: remove use of Bastille. get back to the good state
-	we had :)
-
-	* install_any.pm: warnAboutNaughtyServers
-	(setPackages): default profiles selection to GNOME, KDE, CONFIG
-
-	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
-	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
-	LOCALES"zh"
-	  - raise WindowMaker
-	  - add xfce
-	  - am-utils is a server
-	  - raise some stuff in CONFIG to have stuff there
-	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
-	  - DrakConf from 5 to 4
-
-	* install_steps_interactive.pm: warnAboutNaughtyServers
-	(summary): fix displaying of printer configured
-
-	* lang.pm (langsLANGUAGE): give the list of languages
-
-	* pkgs.pm: warnAboutNaughtyServers
-
-	* install_steps_gtk.pm (installPackages): catch the no png file exception
-	(in case warly is dumb again)
-
-2001/03/27  siegel
-
-	* share/po/i18n_compssUsers: i18n group names
-
-	* share/po/de.po: minor typo-fixes
-	new german version
-
-2001/03/26  daouda
-
-	* share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate)
-
-2001/03/26  fcrozat
-
-	* share/rpmsrate: Install xscreensaver when installing GNOME
-
-2001/03/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: first attempt at pixelization of code (till's cups
-	patches)
-
-2001/03/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon
-	files
-
-	* share/po/vi.po: Updated Croatian, vietnamese and Walloon files
-	Updated Portuguese, Swedish and Thai files
-
-	* share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po,
-	share/po/sv.po: Updated Portuguese, Swedish and Thai files
-
-2001/03/25  Pixel  <pixel@mandrakesoft.com>
-
-	* http.pm (getFile): verify the return value of the server. If not 200
-	(aka Ok),
-	return undef
-
-	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
-	and libqtcups2 for kups in
-	pkg_install_if_requires_satisfied
-
-2001/03/25  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/25  fabman
-
-	* share/po/es.po: updated spanish .po file
-
-2001/03/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: Updated Korean file
-
-	* share/po/sv.po: Updated Swedish file
-
-2001/03/25  Pixel  <pixel@mandrakesoft.com>
-
-	* http.pm (getFile): verify the return value of the server. If not 200
-	(aka Ok),
-	return undef
-
-	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
-	and libqtcups2 for kups in
-	pkg_install_if_requires_satisfied
-
-	* any.pm (ask_users): fix dead-loop
-
-	* bootloader.pm (suggest): add entry for nt
-
-2001/03/25  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/vi.po: Updated Vietnamese file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which
-	is unneeded (and "member" of merge2pcitable
-	was clashing)
-
-	* any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user
-	is given.
-
-	* install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users
-
-	* install_any.pm (disable_user_view): created, takes care of gdm too
-	(taken from msec)
-
-	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
-	francois's bugs ;pp
-
-	* timezone.pm (%l2t): fix for fuzzyChoice
-
-	* share/keyboards.tar.bz2: 
-	  - readding with -kb
-	  - fixing permissions on xmodmap.kr
-	remove before adding again with -kb
-
-	* modules.pm: have natsemi in network.img
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
-	francois's bugs ;pp
-
-	* timezone.pm (%l2t): fix for fuzzyChoice
-
-	* modules.pm: 
-	  - add missing modules (now in sync with pcitable)
-	  - add 'media' class
-	  - cleanup
-
-2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Updated Azeri file
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (copy_advertising): fix escaping $f causing perl to
-	segfault :-(
-	(copy_advertising): handle i18n'ed advertising
-
-	* pkgs.pm: cleanup
-
-	* modules.pm: 
-	  - add missing modules (now in sync with pcitable)
-	  - add 'media' class
-	  - cleanup
-
-2001/03/24  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected bad exited. reincorporated some ugly code,
-	need fixing
-
-2001/03/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (copy_advertising): handle i18n'ed advertising
-
-	* modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel
-	2.4
-
-2001/03/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed screen id for Device to be present whenever the
-	same BusID is used.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* printerdrake.pm: Do not ask to configure a printer if standalone,
-	previously only for embended.
-
-	* Xconfig.pm: fixed typo for wacom.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
-	multiple tablet support (wacom), moved usb probe for mouse and tablet
-	at the beginning.
-
-2001/03/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
-	(ask_from_listf_no_check): fix the fix fix
-
-	* common.pm (formatError): created
-
-	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
-	DHCP/BOOTP
-
-	* diskdrake.pm (try): format the error (no more "at line ...")
-	(Add2LVM): "new" was not i18n'ed
-
-	* install_steps_interactive.pm (exitInstall): no "cancel" button
-
-	* partition_table.pm: add Empty to bad_types
-
-	* fsedit.pm (change_type): When changing a partition type from ext2fs to
-	Linux RAID
-	(or LVM), the mount point should be removed.
-
-2001/03/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/23  dam's  <damien@mandrakesoft.com>
-
-	* tinyfirewall.pm: corrected bad translation
-	correctedd typo
-	updated
-	code cleaning
-	tinyfirewall now works.
-
-	* Makefile.config: added tinyfirewall
-
-	* any.pm, mouse.pm: added /dev/modem in modem list selection
-
-	* standalone/drakxconf: added tinyfirewall entry
-
-	* standalone/tinyfirewall: added update code
-	updated wrapper to launch tinyfirewall in embedded mode
-
-	* netconnect.pm: added /dev/modem in modem list selection
-	netconnect doesn't write the file 1
-
-2001/03/23  fcrozat
-
-	* share/rpmsrate: nautilus-mozilla and xalf are installed by default in
-	GNOME
-	gmc is not installed by default in GNOME
-	gabber gaim are moved to instant messaging
-	gcombust in moved to GNOME CD burner
-	gtm is installed by GNOME/File transfer
-	mozilla is installed by default as www browser
-	galeon is installed by default as www browser for GNOME
-
-2001/03/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/syncrpms: added size-stamp test to copy identical file in version,
-	release.
-
-	* Xconfig.pm: fixed typo for wacom.
-	added multiple tablet support (wacom), moved usb probe for mouse and
-	tablet
-	at the beginning.
-
-	* Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe
-	for mouse and tablet
-	at the beginning.
-	fixed wrong usage of Screen keyword in Device section, should be present
-	and
-	reseted for any multi head card with only one BusID.
-
-	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
-	multiple tablet support (wacom), moved usb probe for mouse and tablet
-	at the beginning.
-
-2001/03/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file
-	Updated Finnish file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
-	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: Added Vietnamese file
-
-2001/03/23  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm: ifix the dams stuff
-
-	* install_steps_interactive.pm (exitInstall): no "cancel" button
-
-	* share/po/i18n_compssUsers: fix for better compliance with po format
-
-	* netconnect.pm: ifix the dams stuff
-	cleanup and enable gzip'ed isdn.db
-
-	* Makefile: gzip ldetect-lst files
-
-	* modules.pm: add i810_audio (still need a script to add missing one and
-	keep in sync)
-
-	* bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives
-
-	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
-	(ask_from_listf_no_check): fix the fix fix
-	(ask_from_listf_no_check): fix the bad fix
-
-	* common.pm (formatError): created
-	(openFileMaybeCompressed, catMaybeCompressed): added
-	(getVarsFromSh): take care of comments
-
-	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
-	DHCP/BOOTP
-
-	* partition_table.pm: add Empty to bad_types
-
-	* mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug)
-
-	* fsedit.pm (change_type): When changing a partition type from ext2fs to
-	Linux RAID
-	(or LVM), the mount point should be removed.
-
-	* detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale
-	(isFloppyOrHD): floppy type is 'fd', not 'floppy'
-	(stringlist): nicer (a la new lspcidrake)
-
-	* Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and
-	MonitorsDB
-
-	* diskdrake.pm (try): format the error (no more "at line ...")
-	(Add2LVM): "new" was not i18n'ed
-
-2001/03/23  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC,
-	use vmlinux for PPC
-	prepend of_dev to initrd stanza in yaboot.conf
-	add 1-button mouse for PPC
-
-2001/03/23  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/22  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139:
-	Add 8139 grub stage.
-
-2001/03/22  dam's  <damien@mandrakesoft.com>
-
-	* bootlook.pm: corrected mapn
-
-	* standalone/draknet: removed use Data::Dumper
-
-	* netconnect.pm: removed mail informat oin
-	comment update
-
-	* tinyfirewall.pm: removed use Data::Dumper
-	working on tinyfirewall
-
-2001/03/22  fabman
-
-	* share/po/es.po: changed "swap" for "intercambio" in the spanish .po
-	files
-	updated DrakX, menudrake and urpmi es.po files
-
-2001/03/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed wrong access to undefined value promoted to
-	empty array reference.
-
-2001/03/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c, mdk-stage1/tools.h: 
-	  - fix detection of more than 3 scsi attached devices
-	  - cleaner code for cmp of ptr against static strings
-
-2001/03/22  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake: remove test ugliness of dams
-
-	* c/Makefile.PL: no pcmcia_probe in drakxtools
-
-	* modules.pm (load_thiskind): indent as it should be
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): fix the message
-	which was uptodate only for
-	sparc :-(
-
-	* Xconfigurator.pm: no need for "use Data::Dumper;"
-
-2001/03/22  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should
-	have been mace
-
-2001/03/22  yduret
-
-	* bootlook.pm: mapn works tx dams
-	nmap
-	added mapn fun to reduce code.. testing it
-	added install of rpm
-	xpm  png files
-
-	* pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm,
-	pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm,
-	pixmaps/verti.xpm: convert xpm to png
-
-2001/03/21  dam's  <damien@mandrakesoft.com>
-
-	* standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool
-
-	* netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug
-
-2001/03/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm: added pci id reference.
-
-	* c/stuff.xs.pm: added support for pci id extraction.
-
-	* Xconfigurator.pm: fixed wrong XFree4 version reference.
-	fixed null string in monitor identifier.
-	added multi-head support in XFdrake.
-
-2001/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: honour embedded mode
-
-	* share/compssUsers: move NETWORKING_FILE (contains stuff for nfs
-	mounting..) from Internet
-	Station to Network Computer
-
-2001/03/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po,
-	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po,
-	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
-	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated
-	Croatian and Serbian files
-
-	* share/po/sp.po, share/po/sr.po: Updated Serbian files
-	Updated Croatian and Serbian files
-
-	* share/po/az.po: Updated Azeri file
-	Updated Croatian and Serbian files
-
-	* share/po/sk.po: Updated Azeri and Slovak files
-	Updated Croatian and Serbian files
-
-	* lang.pm: Added fields to charsets table holding info for mount
-	(iocharset and
-	codepage mount options)
-
-2001/03/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_default_packages): nice warning if mount in vfat fails
-
-	* share/rpmsrate: move webmin to CONFIG
-	remove ipchains and iptables, raise gfcc
-
-	* docs/README: add cvs howto
-
-	* install_steps_interactive.pm (summary): fix
-
-	* detect_devices.pm: old code
-
-	* bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo
-	doesn't like them
-	(add_kernel): cleanup
-	(suggest): make it work with kernel22-secure and no kernel22
-
-	* modules.pm (when_load): move the alias sound to when_load, don't check
-	ppc as it
-	could be used for non-ppc
-	(load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for
-	every
-	load_thiskind, not only scsi one
-
-	* c/stuff.xs.pm (from_utf8): as pablo said...
-
-2001/03/21  siegel
-
-	* share/po/de.po: new german version
-	new german version
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (@drivers_by_category): if_ization
-	(load_thiskind): cleanup
-
-2001/03/21  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (add_kernel): cleanup
-	(suggest): make it work with kernel22-secure and no kernel22
-
-	* share/rpmsrate: remove ipchains and iptables, raise gfcc
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* interactive.pm: no wizard if warning
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fix pcmcia functions only on x86
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-	* modules.pm (@drivers_by_category): if_ization
-	(load_thiskind): cleanup
-
-	* any.pm, install2.pm, share/rpmsrate: use bastille backend
-
-	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-
-	* install_steps.pm, install_any.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add
-	routine for - PPC
-	any.pm: double "Append" entry in expert mode for yaboot.conf - PPC
-	install_steps_interactive: setup dmasound - PPC
-	modules.pm: load Mac hardware modules - PPC
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bug in reading resolv.conf, and changed chmod
-	for net_cnx_*
-
-	* interactive.pm: no wizard if warning
-
-	* standalone/draknet: added update after {dis}connecting
-
-2001/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* diskdrake.pm: fix formatting of raid
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: use bastille backend
-	  - add nautilus
-
-	* install_steps_interactive.pm: fix pcmcia functions only on x86
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-	(setupSCSI): don't pcmcia_probe if testing
-	  - tellAboutProprietaryModules moved to setupSCSI
-	  - miscellaneous step re-enabled, called Security
-	  - pcmcia_probe moved to setupSCSI, skipped in noauto
-
-	* any.pm: use bastille backend
-
-	* install2.pm: use bastille backend
-	  - tellAboutProprietaryModules moved to setupSCSI
-	  - miscellaneous step re-enabled, called Security
-	  - pcmcia_probe moved to setupSCSI, skipped in noauto
-	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
-	parameter any more)
-
-	* netconnect.pm (modem_detect_backend): cleanup
-
-	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
-	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
-	parameter any more)
-
-	* Makefile: install cardmgr
-
-	* install_any.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-	(setPackages): install usbd in case of usb
-
-	* install_steps.pm: 
-	  - create install_any::unselectMostPackages
-	  - use it instead of pkgs::unselectAllPackages (otherwise
-	default_packages ends up non-selected)
-
-2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC
-	detect_devices.pm: forgot to remove commented code after test
-	netconnect.pm: load macserial module for PPC
-
-2001/03/20  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet, netconnect.pm: improved connection windows, and
-	loading / saving of /etc/sysconfig/network-scripot/net�cnx*
-
-2001/03/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: 
-	  - add nautilus
-
-	* install_any.pm (setPackages): install usbd in case of usb
-
-	* Makefile: install cardmgr
-
-2001/03/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* fsedit.pm: fix loopback appearing twice in format partition
-
-	* diskdrake.pm: fix "loopback" name of loopback tab in diskdrake
-
-2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated korean file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (computeGroupSize): fix hacks, better hacks
-	(saveCompssUsers): fix
-
-	* install_steps_interactive.pm (chooseGroups):
-	  - make the computed size work
-	  - unselectAll when a profile is unselected
-
-	* interactive_gtk.pm (ask_from_entries_refW): better sizing in case of
-	scrolls
-
-2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corrected graphical layout for newbies
-
-	* netconnect.pm: added net_cnx_{up, down} save
-
-2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ko.po: updated korean file
-	Updated po files
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files
-
-2001/03/19  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (computeGroupSize): fix hacks, better hacks
-	(saveCompssUsers): fix
-
-	* share/rpmsrate: 
-	  - add rxvt-CJK
-	  - exchange xterm and rxvt
-	  - move bc from SCIENCES to SYSTEM
-
-	* interactive_newt.pm (ask_from_entries_refW):
-	  - ensure the width is less than $width - 7 (in french and 80x25, the
-	treelist was too big)
-	  - if term is very big, use 10 lines instead of 5
-	  - if no button is asked, but one in any case otherwise it's buggy
-
-	* install_steps_interactive.pm (chooseGroups):
-	  - make the computed size work
-	  - unselectAll when a profile is unselected
-
-	* interactive.pm (ask_from_listf_no_check): fix fix
-	(ask_from_listf_no_check): fix the filtering of exceptions
-
-2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC
-
-2001/03/18  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for
-	hd-install when you provide a not valid ISO (cd #2 for example)
-
-	* mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h,
-	mdk-stage1/log.h: use some help with __attribute__
-
-2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup
-
-	* mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync
-
-	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
-	editing ask_from_entries in stdio mode
-
-	* mdk-stage1/pci-resource/Makefile: do not use marfiles for deps
-
-2001/03/17  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
-	* install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
-	* share/rpmsrate: add gpm & evolution
-
-2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to
-	work with dietlibc
-
-	* mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET
-	for testing purposes..
-
-	* mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new
-	mkinitrd package release
-
-	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
-	editing ask_from_entries in stdio mode
-
-2001/03/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sv.po: updated Swedish file
-
-	* share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese
-	keyboard
-
-	* keyboard.pm: Added choice of Korean keyboard
-
-2001/03/17  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (write_langs): in case of empty %_install_langs, don't write it
-
-	* install_steps.pm (pkg_install_if_requires_satisfied): better logging
-
-	* share/rpmsrate: add gpm & evolution
-
-2001/03/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/Makefile: refine deps
-
-	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile,
-	mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper
-
-	* mdk-stage1/insmod-busybox/insmod.c: force load
-
-2001/03/16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): set flag "TV" when bttv hardware is there
-
-	* share/compssUsers, share/rpmsrate: move out TV from VIDEO
-
-	* diskdrake.pm (Type): fix the code verifying size >32 for reiserfs
-
-	* modules.pm (write_conf): better logging
-
-	* c/stuff.xs.pm: add from_utf8
-
-	* c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and
-	description
-
-2001/03/16  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert,
-	tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic,
-	mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad
-	gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot -
-	remove/re-add - did not use -kb switch - thx Pixel
-
-2001/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: SiS card are no more prefered for XF3.
-	added standalone support to prefer XF3 or XF4 to
-	keep current used server version.
-
-	* standalone/XFdrake: remove duplicate begin label.
-	take care of existing configuration.
-
-2001/03/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: skip dc395x_trm on stage1
-	dc395x_trm is back in 2.4
-
-	* share/compssUsers: try to enhance
-
-2001/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2001/03/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says
-	this is not needed anymore :)
-
-2001/03/15  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot,
-	tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot,
-	tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD,
-	mkhybrid-1.12b5.4, yaboot: create PPC CD
-
-	* install_steps_interactive.pm, detect_devices.pm, bootloader.pm:
-	bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed
-	temporary file read/write per Pixel
-
-	* Xconfigurator.pm: force 1024x768 on Powerbook
-
-	* tools/ppc/README: README: README for creating PPC boot CD
-
-2001/03/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: changed label + profile before types..
-
-2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po,
-	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po,
-	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
-	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
-	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po:
-	corrected the script and updated po files
-
-2001/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssUsers: keep only one Development entry
-
-	* install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation
-
-	* bootlook.pm: fix for perl2fcalls
-
-	* install_steps_interactive.pm (chooseGroups): disable the size display as
-	it is wrong (for the beta2)
-
-2001/03/14  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm,
-	partition_table_mac.pm, bootloader.pm: fix bootstrap partition
-	creation/tracking
-	allow Xpmac to launch in 2 modes based on cmdline
-
-2001/03/14  siegel
-
-	* share/po/de.po: new german version
-
-2001/03/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: changed label + profile before types..
-
-2001/03/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed unselect management of choice, propagate unselection
-	correctly to all
-	packages requiring unselected package.
-
-	* install_any.pm: use LD_LOADER when invoking parshedlist.
-
-2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/nl.po: updated Norwegian file
-
-	* share/locales.tar.bz2, share/gconv.tar.bz2, share/list,
-	share/fonts.tar.bz2: new fonts and locale files
-
-	* share/po/ko.po: Fixed email of Korean translator
-	updated Korean file
-
-	* install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm:
-	completed language list
-	completed language->keyboard guessing list
-	aesthetic changes to an English message (removed \n and let gtk+
-	do the formatting, it is nicer)
-
-	* share/po/az.po: Updated Azeri file
-
-2001/03/14  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: fix the compssUsers interpretation
-	(readCompssUsers): change the key of compssUsers, added "label"
-	(computeGroupSize): fix bug
-	(computeGroupSize): fix logging
-
-	* share/gconv.tar.bz2: moved to share/list
-
-	* bootlook.pm: fix for perl2fcalls
-
-	* share/rpmsrate: CLIENT & SERVER is prohibited
-
-	* timezone.pm: 
-	  - add many timezones
-	  - defaults to GMT
-	  - verifier added
-
-	* install_steps_gtk.pm: fix the compssUsers interpretation
-	(choosePackagesTree): fix
-
-	* common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return
-	the number
-	of matched words/characters
-
-	* share/compssUsers: keep only one Development entry
-	CLIENT & SERVER is prohibited
-
-	* install_steps_interactive.pm (chooseGroups): disable the size display as
-	it is wrong (for the beta2)
-	(chooseGroups): add path for seperating groups, use "label" for the
-	group text
-
-	* Makefile: remove gconv
-
-2001/03/13  siegel
-
-	* share/po/de.po: Fixed typos.
-
-2001/03/13  siegel
-
-	* share/po/de.po: Fixed typos.
-
-2001/03/13  dam's  <damien@mandrakesoft.com>
-
-	* share/help.png: changed
-
-2001/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers
-	for the tree
-
-	* standalone/drakgw: pixelization
-
-	* share/rpmsrate: HDF can't be at the beginning of the line or it will be
-	taken as a flag
-	moved icewm to SYSTEM with !KDE !GNOME
-
-	* pkgs.pm: compss is deprecated. use compssUsers for the tree
-	(readCompssUsers): get the "path"
-
-	* install_steps.pm: compss is deprecated. use compssUsers for the tree
-	renamef created and used
-
-	* detect_devices.pm (burners): don't use cdroms() which return scdX for
-	ide burners, and
-	isBurner don't use the same technique. so use get() and grep for type
-	"cdrom"
-
-	* install_any.pm: compss is deprecated. use compssUsers for the tree
-	(setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA
-	renamef created and used
-
-	* install_steps_interactive.pm: compss is deprecated. use compssUsers for
-	the tree
-	(chooseGroups): fix to get back the icons
-	(chooseGroups): size computed should work
-
-	* common.pm: renamef created and used
-
-2001/03/13  siegel
-
-	* share/po/de.po: new german translation
-
-2001/03/13  warly
-
-	* share/compssUsers: fix {W,w}orkstation
-	remove ^Server and ^Development
-
-2001/03/13  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakgw: pixelization
-
-	* install_steps_interactive.pm (chooseGroups): size computed should work
-
-	* share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME
-
-	* install_steps.pm, common.pm, install_any.pm: renamef created and used
-
-2001/03/12  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: removed wizard pixmap from install
-
-	* pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated
-	added pixmap for wizard
-
-	* my_gtk.pm: new wizard layout, with pixmaps.
-	added ugly workaround for ugly Hseparator
-
-	* share/step-red.png, share/step-orange.png, share/step-orange-click.png,
-	share/step-green-click.png, share/step-green.png, share/step-red-on.png,
-	share/step-orange-on.png, share/step-green-on.png,
-	share/step-green_s.png, share/step-red-click.png: removing bad png
-	files...
-
-	* share/help.png: new help button. blah
-
-	* install_any.pm: typo
-
-	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated
-
-	* netconnect.pm: corrected askokcancel -> askyesorno
-
-	* interactive.pm: corrected bad okcanel in wizard mode
-
-	* install_steps_interactive.pm: added $::isInstall
-
-	* share/logo-mandrake_trans.png: new logo for other themes
-
-	* services.pm: removed use Data::Dumper
-	corrected bug in display
-
-2001/03/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm,
-	live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should
-	work for other
-	combination but not tested. fixed locale usage and gtk environment
-	interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX).
-	created LD_LOADER environment variable to keep track of right ELF loader
-	to be used for the GLIBC used by the live update. added internal PATH
-	to LD_LIBRARY_PATH as ELF loader only check this one and not PATH.
-
-2001/03/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: 
-	  - make it work as a wizard
-	  - make it work with iptables (kernel-2.4)
-
-	* modules.pm: reflect Jeff Garzik's answers to my questions on kernel@
-
-2001/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po,
-	share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po,
-	share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque
-	file
-
-2001/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): save the compssUsers flattened
-	for rpmdrake
-
-	* install_steps_interactive.pm (summary): remove 'clicked' (labels are
-	used)
-	put everything in %compssUsers, use field flags for the flags :)
-
-	* pkgs.pm (computeGroupSize): log what is found
-	(saveCompssUsers): make it work
-	(readCompssUsers): clean-up
-	(saveCompssUsers): created
-	put everything in %compssUsers, use field flags for the flags :)
-	(computeGroupSize): created
-
-	* share/rpmsrate: lower Zope (anyway Zope is not in main)
-
-	* fsedit.pm (hds): search for existing lvm in @hds *and* @lvms
-
-	* commands.pm (loadkeys): created
-
-	* install_any.pm (setPackages): don't readCompssUsers with $o->{packages}
-	(setPackages): kernel-secure doesn't exist anymore, use kernel22-secure.
-	don't use kernel-secure as a kernel-smp.
-	put everything in %compssUsers, use field flags for the flags :)
-	(setPackages): set compssUsersChoice "3D" if 3D enabled graphic card
-
-	* interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries
-	add "label" type
-
-	* share/compssUsers: change the path format
-
-	* detect_devices.pm (get_mac_model): fix for perl2fcalls
-
-	* interactive.pm: add "label" type
-
-2001/03/12  warly
-
-	* share/compssUsers: add some NETWORKING_* that were empty
-	dispach some DEVELOPMENT and SERVER to more appropriate groups
-	added path
-
-	* share/rpmsrate: add some NETWORKING_* that were empty
-	dispach some DEVELOPMENT and SERVER to more appropriate groups
-
-2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ftp.pm: do not retry on 550 file unavailable
-
-2001/03/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled
-	graphic card
-
-2001/03/11  dam's  <damien@mandrakesoft.com>
-
-	* services.pm: no more restart button
-
-2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* ftp.pm: do not retry on 550 file unavailable
-
-2001/03/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (summary): fix clicked empty handler
-
-	* share/rpmsrate: 
-	  - lower tftp-server
-	  - a lot of modifs (thanks to Prana)
-
-2001/03/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakxservices: embedded mode
-
-	* my_gtk.pm: added gtkset_border_width
-	typo again
-	typo
-	added gtkmove
-	added gtkset_modal and gtkappenditems
-
-	* services.pm: fixed big bug.
-	imajor improvement.
-	improved.
-
-2001/03/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Korean file
-
-2001/03/09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakxconf: added harddrake
-
-	* my_gtk.pm: applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-	added gtkradio
-
-	* bootlook.pm: workaround for the graphical layout.
-
-	* install_steps_gtk.pm: applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-
-	* printerdrake.pm: if embedded -> no first question
-
-	* interactive_gtk.pm: added tooltips to create_boxradio
-	applied gtkradio
-	created create_boxradio
-	in wizard mode : list -> radio buttons
-
-2001/03/09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
-	DEVELOPEMENT
-
-2001/03/09  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: keyboard mapping for PPC
-
-	* detect_devices.pm: routine to detect MacIntosh model code
-
-2001/03/09  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm: added gtkradio
-
-	* standalone/draknet: changed graphical layout, expert mode
-
-2001/03/09  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (read_rpmsrate): handle the special case of packages requiring
-	locales-*,
-	adding the flag LOCALES"*" for them
-
-	* install_steps_interactive.pm (choosePackages): moved the log to
-	install2::choosePackages (to have it in
-	auto_installs too)
-
-	* install_any.pm (setPackages): set compssUsersChoice LOCALES"*"
-
-	* install2.pm (choosePackages): log groups choosen
-
-	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
-	DEVELOPEMENT
-	  - chineese packages
-	  - move Aurora's to AURORA (DrakX take care of Aurora)
-
-	* install_steps_gtk.pm (remove_advertising): created
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* verify_c: fix the regexp
-
-	* detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: applied if__
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* verify_c: fix the regexp
-
-	* share/rpmsrate: add i18n'ed packages
-
-	* detect_devices.pm (floppies): load module "floppy" before probing
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* common.pm: added if__
-
-	* netconnect.pm: applied if__
-
-2001/03/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: avoid using e2fsck, else it abort by checking partition
-	size (which differs).
-	fix resize ext2 by using resize2fs.
-
-	* pkgs.pm: changed choice of package for selection.
-
-	* share/list: added resize2fs and dumpe2fs, removed ext2resize which is
-	replaced.
-
-2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not
-	honoured by kernel
-
-2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: advertising modifs
-	(setPackages): use burners instead of IDEburners
-
-	* bootloader.pm: cleanup
-
-	* interactive.pm (ask_from_listf_no_check): catch wizcancel and return
-	undef
-
-	* fs.pm (write_fstab): change again for 'none' checking the mount point
-	(write_fstab): special case for device ``none'' (which can be mounted
-	twice or more :)
-
-	* my_gtk.pm (_create_window): on delete_event, destroy the window and
-	raise wizcancel
-
-	* share/po/fr.po: fix bad translation
-
-	* share/rpmsrate: add i18n'ed packages
-	raise kdebase
-
-	* install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs
-
-	* detect_devices.pm: cleanup
-	(isBurner): use syslog to detect scsi burners
-
-2001/03/08  Stew Benedict  <sbenedict@mandrakesoft.com>
-
-	* install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp
-
-	* partition_table_mac.pm: fixed variable referencing - thx Pixel
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad pci number -> string
-
-2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated
-	Bulgarian, Catalan and Serbian files
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (dev2grub): better error reporting
-
-	* tools/cvslog2changelog.pl (%users): add stew
-
-	* install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix
-
-	* share/rpmsrate: raise kdebase
-	xcdroast is the best cd burner ui, raise it above others
-	lower some EDITORS
-	raise vim-X11
-	lower xrn, raise pan
-
-	* install_any.pm (setPackages): use burners instead of IDEburners
-	(setPackages): at least set BURNER for ide burners
-
-	* any.pm: cleanup
-
-	* install_steps_interactive.pm, install2.pm: re-add miscellaneous step,
-	but always hidden (aka automatic)
-
-	* detect_devices.pm (isBurner): use syslog to detect scsi burners
-
-	* fs.pm (write_fstab): special case for device ``none'' (which can be
-	mounted
-	twice or more :)
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
-	(without mem=)
-
-2001/03/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad pci number -> string
-
-2001/03/08  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
-	(without mem=)
-
-2001/03/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected default focus after detection
-	don't test adsl if net install
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (add_alias): remove the alias block-major-11 as it's
-	overriding the
-	default alias to sr_mod, and is uneeded with scsi_hostadapter being
-	added
-	to /etc/modules.conf
-
-	* share/rpmsrate: lower heartbeat
-
-2001/03/07  sbenedict
-
-	* help.pm: * perl-install/help.pm  - typo in yaboot help
-
-	* any.pm: * perl-install/any.pm - fixed two $l vs. @l references -
-	bootloader menu, need image/boot in rec mode PPC
-	CVl:
-	----------------------------------------------------------------------
-
-	* devices.pm: * perl-install/devices.pm - add adbmouse
-
-2001/03/07  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages
-
-2001/03/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm, bootloader.pm: fixed support for other kernel for
-	bootloader entries.
-	automatically add 2.2 entries for kernel22 (manage hack-kernel too).
-
-	* Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card.
-
-	* pkgs.pm: added support for killing all child process of a transaction,
-	necessary to be
-	able to umount cdrom and eject it correctly.
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: use gb16fs instead of gb16st
-
-	* modules.pm (add_alias): remove the alias block-major-11 as it's
-	overriding the
-	default alias to sr_mod, and is uneeded with scsi_hostadapter being
-	added
-	to /etc/modules.conf
-
-	* share/rpmsrate: lower heartbeat
-	lower Mesa's rate
-
-	* install2.pm (main): save $@ in $err so that it's not modified before
-	being used
-
-	* share/locales.tar.bz2: remove ending '/' in symlinks not pleasing
-	packdrake
-
-	* standalone/drakboot: make it please perl2fcalls
-
-2001/03/07  sbenedict
-
-	* bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force
-	XF4 for PPC in recommended mode
-	* perl-install/bootloader.pm - rework get_of_dev to work in live install
-
-	* install_steps_interactive.pm, any.pm, partition_table_mac.pm: *
-	perl-install/any.pm - change in partition_table_mac'xxx syntax
-	* perl-install/install_steps_interactive.pm - change in
-	partition_table_mac'xxx syntax
-	
-	* perl-install/partition_table_mac.pm - change in
-	partition_table_mac'xxx syntax
-
-2001/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/fr.po: Fixed French typos reported by tester
-
-2001/03/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: use gb16fs instead of gb16st
-
-	* fsedit.pm: fix typo
-
-	* install2.pm (main): save $@ in $err so that it's not modified before
-	being used
-
-	* share/rpmsrate: lower Mesa's rate
-
-	* standalone/drakboot: make it please perl2fcalls
-
-2001/03/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected bad %intf while savung
-	don't ask configuration if expert
-	now detecting adsl
-
-	* standalone/draknet: remmoved 'quiting appli' screen
-
-2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: fix save of automatic stage1 info for static network
-
-	* mdk-stage1/init.c: do not display from syslog msg's from RPM telling
-	that it
-	installed/removed some pkg's
-
-	* mdk-stage1/Makefile: fix includes for init
-
-2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
-	share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese
-	file
-
-2001/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* perl2fcalls: 
-	  - small fix for bootlook.pm
-	  - don't display reused
-
-	* detect_devices.pm (stringlist): if no text description, display ids
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): comment old code
-	(summary): fixes
-	(setupSCSI): cleanup
-	(summary): display sound/tv/isdn cards found
-
-	* fsedit.pm (check_mntpoint): don't allow LVM on / or /boot
-	(@suggestions_mntpoints): add /boot
-
-	* install_any.pm: hack to make perl2fcalls happy
-	(getHds): fix for no hd detected in newbie installs
-	(setPackages): s/snd-slot/sound-slot/
-
-	* install_steps_auto_install.pm (@graphical_steps): add
-	beforeInstallPackages so that advertisings are there
-
-	* install2.pm (setupSCSI): remove autoSCSI, cleanup
-
-	* http.pm, ftp.pm: don't use install_any
-
-	* modules.pm: add cciss
-
-	* partition_table.pm (add): create 3 primaries before creating an extended
-	if DAC960 (/dev/rd/*)
-	(add): max number of parts for rd, ida and cciss
-
-2001/03/06  yduret
-
-	* bootlook.pm: pixelisation
-
-2001/03/06  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: corrected bad file search
-	corrected intf setting
-
-	* standalone/draknet: added enable/disable networking button.
-
-	* standalone/drakxconf: updated to be launched frome DrakConf if no
-	DISPLAY
-
-	* netconnect.pm: now detecting adsl
-	typo
-	better load_conf
-
-	* Xconfigurator.pm: cleaned png displaying
-
-	* common.pm: setinhash -> set_in_hash
-	added setinhash
-
-	* fs.pm: typo
-	use set_in_hash
-
-2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic
-	mode
-
-	* mdk-stage1/Makefile: fix includes for init
-
-2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: corrected some typos, Updated Japanese file
-	updated Lithuanian file
-
-	* help.pm, standalone/draknet: corrected some typos, Updated Japanese file
-
-2001/03/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to
-	any::runlevel
-
-	* partition_table.pm (add): max number of parts for rd, ida and cciss
-
-	* fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash
-
-	* diskdrake.pm (Create): pixelization
-
-	* fsedit.pm (hds): pixelization
-
-	* install_steps_auto_install.pm (@graphical_steps): add
-	beforeInstallPackages so that advertisings are there
-
-	* modules.pm: add cciss
-
-	* install2.pm (main): remove unloading vfat (not needed anymore with
-	mdk-stage1)
-
-2001/03/05  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
-
-	* Makefile: added pixmaps copying
-
-2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* netconnect.pm, bootlook.pm, help.pm: fixed English typos
-
-2001/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use
-	generate_automatic_stage1_params
-
-	* c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK
-
-	* install_any.pm (generate_automatic_stage1_params): replace
-	generate_ks_cfg
-
-2001/03/05  dam's  <damien@mandrakesoft.com>
-
-	* Makefile: added pixmaps copying
-
-	* standalone/draknet: required gtk only if needed, added redirection to
-	newt if needed
-
-	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
-	corrected short circuit if network install
-	corrected bad end message,
-	added copying of resolv.conf & modules.conf
-
-	* install2.pm: moved askrootpasswd and adduser before network conf
-
-	* network.pm: removed old NS0 fetching. /etc/resolv.conf is read in
-	install2.pm now
-	removed setdefaultroute and sethostname
-
-2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: Updated Latvian, Belarussian and Spanish files
-
-2001/03/05  Pixel  <pixel@mandrakesoft.com>
-
-	* lvm.pm (lv_create): fix typo
-
-	* bootloader.pm: add use devices
-	(install_grub): ensure the translated messages are not too big the hard
-	way
-
-	* install_any.pm (generate_automatic_stage1_params): replace
-	generate_ks_cfg
-	(install_urpmi): have "use hdlist ..." in any case
-
-	* my_gtk.pm: XSetInputFocus now done in perl-GTK
-	(_create_window): don't care about c::XSetInputFocus not existing
-
-	* any.pm (setupBootloader): pixelization
-	(setupBootloader): fix call to get_append
-
-	* interactive.pm (vnew): cleanup
-
-	* common.pm (salt): cleanup
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use
-	generate_automatic_stage1_params
-
-	* c/stuff.xs.pm: XSetInputFocus now done in perl-GTK
-
-	* c/Makefile.PL: compile fix
-
-	* diskdrake.pm (create_buttons4partitions_): fix for displaying LVM
-
-	* Xconfigurator.pm (xtest): use external xtest if standalone
-
-	* install2.pm (main): remove unloading vfat (not needed anymore with
-	mdk-stage1)
-
-2001/03/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	diskdrake.pm, share/po/af.po: updated po files
-
-2001/03/04  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work
-
-	* share/rpmsrate: 
-	  - remove autologin
-	  - move X11R6-contrib to DEVELOPEMENT and lower rate
-
-2001/03/04  stew   <sbenedict@mandrakesoft.com>
-
-	* any.pm - changes to enable yaboot configuration for PPC
-
-	* diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap
-
-	* install_steps_interactive.pm - auto-add Apple Bootstrap - PPC
-
-2001/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake,
-	install_interactive.pm, install2.pm: small fixes for LVM
-
-	* diskdrake.pm: don't default the LVM name to 'pp' ;pp
-	small fixes for LVM
-
-2001/03/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: small fixes for LVM
-	(doPartitionDisksAfter): small adaptation for LVMs
-	use run_or_die
-
-	* fsedit.pm: small fixes for LVM
-	(hds): detect LVMs and return them
-	(add): handling of LVMs
-	(@partitions_signatures): add new magic of reiserfs
-
-	* bootloader.pm: use run_or_die
-
-	* run_program.pm (run_or_die, rooted_or_die): created
-
-	* install_steps_interactive.pm: cleanup
-
-	* install_any.pm (getHds): handle LVMs. $o->{lvms} contain them
-	(setPackages): ask for installation of package lvm when needed
-	(suggest_mount_points, find_root_parts): take $fstab as arg instead of
-	$hds
-
-	* install2.pm: small fixes for LVM
-	(formatPartitions): call vgscan if needed when / is mounted
-
-	* devices.pm (make): better caller in error
-
-	* share/list: add progs for LVM handling
-
-	* install_interactive.pm: small fixes for LVM
-
-	* diskdrake.pm: small fixes for LVM
-	  - addition of drive to notebook cleaned
-	  - various clean-up
-	  - handling of LVMs
-
-	* standalone/diskdrake: small fixes for LVM
-	small adaptation
-
-	* lvm.pm: small fixes for LVM
-	creation
-
-	* partition_table.pm: add isLVMBased
-
-2001/03/02  stew   <sbenedict@mandrakesoft.com>
-
-	* commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC
-
-	* install_steps.pm - no bootfloppy, added yaboot.conf - PPC
-
-	* install_interactive.pm - pdisk vs. fdisk - PPC
-
-	* bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz
-
-2001/03/02  stew   <sbenedict@mandrakesoft.com>
-
-	* c/smp.c -stanza for PPC
-	
-	* detect_devices.pm - added code for MO devices
-
-	* help.pm - help information for yaboot - PPC
-
-	* partition_table.pm - PPC mods
-
-	* partition_table_mac.pm - PPC mods 
-
-	* modules.pm - PPC mods - parallel port not used
-
-	* diskdrake.pm - PPC mods - display like pdisk
-
-	* install2.pm - PPC mod - no bootdisk
-
-	* fs.pm - bootstrap partition - PPC
-	
-2001/02/27  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: pop up a dialog to quit X when accepting
-	configuration
-
-2001/02/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm (@MBR_signatures): add yet another grub signature
-
-	* devices.pm (entry): add fd0H1440 and fd1H1440
-
-	* bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be
-	created
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm,
-	pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy
-
-	* Makefile: typo
-	new pixmap policy
-
-	* bootlook.pm: typo
-	new pixmap policy
-	need to be merged with bootloader
-
-	* standalone/draknet: reincluded Gtk + init Gtk
-	thiskind -> thiskind_backend
-	new pixmap policy
-
-	* standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po,
-	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers
-	script to produce a correct pot file
-	Updated Estonian and Walloon files
-
-	* bootlook.pm: changed I_() to _() so xgettext cna find the translatable
-	strings
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/drakgw: pixelization
-
-	* install_steps.pm: remove unneeded "use install_interactive"
-
-	* install_steps_gtk.pm (copy_advertising): fix changing for
-	advertising_images
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: should correct bad resolv.conf when swithcinf in
-	standalone embedded mode. Not Certified
-	fixed standalone edition
-	corrected wizard mode.
-
-	* Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap
-	policy
-
-	* standalone/draknet: new pixmap policy
-	fixed standalone edition
-
-	* bootlook.pm: need to be merged with bootloader
-
-	* interactive_gtk.pm: if wizard, show the button
-
-	* standalone/drakboot: short-circuit to bootlook for the moment.
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (if_): fix for use in scalar context
-
-	* install_steps_interactive.pm (summary): translate mouse description
-
-	* install_steps.pm: remove unneeded "use install_interactive"
-
-	* install_steps_gtk.pm (copy_advertising): fix changing for
-	advertising_images
-
-2001/02/26  warly
-
-	* share/compssUsers, share/rpmsrate: remove some packages
-
-2001/02/26  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: if wizard, show the button
-
-	* netconnect.pm: corrected wizard mode.
-
-2001/02/26  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (if_): fix for use in scalar context
-
-	* install_steps_interactive.pm (summary): translate mouse description
-
-2001/02/25  dam's  <damien@mandrakesoft.com>
-
-	* share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo.
-
-	* netconnect.pm: profile handling.
-	profile handling
-	corrected wizard.
-
-	* standalone/draknet: profile handling.
-	profile handling
-
-	* install_steps_interactive.pm: updated
-
-2001/02/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the load_deps before all the loadO's
-
-	* install_any.pm (g_auto_install): have formatMountPartitions graphical if
-	$graphical
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1"
-	for replay
-
-	* interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists
-	center the chosen value
-
-2001/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install2.pm: move writing to config files from
-	install2::selectKeyboard to install_steps
-
-	* share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in
-	the CVS since the current cooker version is too recent
-
-	* commands.pm (more): handle 'q' to quit
-
-2001/02/24  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile (stuff): fix the fix's fix :'-(
-
-	* detect_devices.pm (pci_probe): fix to clean the log
-
-	* install_steps_interactive.pm (setRootPassword): NIS server must be
-	editable
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
-	fully automated install'.
-
-	* install_steps_auto_install.pm (@graphical_steps): specify which step
-	should be interactive
-
-	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-
-	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
-	(configurePrinter): if_'ization
-
-	* install_steps_interactive.pm (exitInstall): ask wether Replay or
-	Automated
-	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
-	automated install'.
-	(summary): nicer mouse name
-
-2001/02/23  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard
-	layout, no use gtk in draknet, minor bugfixes
-
-2001/02/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: added accessor the rpmsrate data of packages.
-	avoid rebuilding the database for oem, rpm db is assumed to be fine.
-
-	* rescue/make_rescue_img: removed kernel_reread program.
-
-	* rescue/tree/etc/oem: removed server from selection.
-	added mutli CD support to OEM (NFS/DVD transparent)
-	fixed selection of package now select much more than before.
-	fixed root partition size set to the minimum.
-
-2001/02/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/rpmsrate: move xterm to SYSTEM
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if
-	needed
-
-	* install_steps_auto_install.pm (@graphical_steps): specify which step
-	should be interactive
-
-	* c/stuff.xs.pm: hack for macroporcessing in term.h
-	use C_DRAKX
-
-	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
-	(configurePrinter): if_'ization
-
-	* share/rpmsrate: add packages installed on demand by DrakX. they are
-	specifically flagged
-	or flagged 'INSTALL'
-
-	* perl2fcalls: handling of ``package''->import(``what to import'')
-
-	* interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest
-
-	* Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0
-
-	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
-	fully automated install'.
-
-	* c/Makefile.PL: use C_DRAKX
-
-	* pkgs.pm (setSelectedFromCompssList): fix the fix
-
-	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
-	add setting C_DRAKX to 1 by default
-
-	* install_steps_interactive.pm (exitInstall): ask wether Replay or
-	Automated
-	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
-	automated install'.
-	(summary): nicer mouse name
-
-2001/02/23  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): double clicking on list
-	means 'Ok'
-
-	* pkgs.pm (setSelectedFromCompssList): fix sillyness
-
-2001/02/22  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corected infinite loop
-
-2001/02/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* rescue/tree/etc/oem: minor cleanup to edit partition size more easily.
-	brand new version written in perl, support repartitionning on the fly of
-	the
-	hard disk and resize of already present FAT partition.
-
-	* rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit
-	more cleaner (added dependancy).
-	added missing file for rescue to enable new oem install.
-
-2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/insmod-modutils/include/elf_hppa64.h,
-	mdk-stage1/insmod-modutils/util/alias.h,
-	mdk-stage1/insmod-modutils/util/xstrcat.c,
-	mdk-stage1/insmod-modutils/util/gzfiles.c,
-	mdk-stage1/insmod-modutils/include/elf_arm.h,
-	mdk-stage1/insmod-modutils/util/sys_qm.c,
-	mdk-stage1/insmod-modutils/util/modstat.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc.c,
-	mdk-stage1/insmod-modutils/include/elf_m68k.h,
-	mdk-stage1/insmod-modutils/Makefile,
-	mdk-stage1/insmod-modutils/util/xstrdup.c,
-	mdk-stage1/insmod-modutils/obj/obj_arm.c,
-	mdk-stage1/insmod-modutils/obj/obj_m68k.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc64.h,
-	mdk-stage1/insmod-modutils/util/sys_dm.c,
-	mdk-stage1/insmod-modutils/include/elf_s390.h,
-	mdk-stage1/insmod-modutils/obj/obj_s390.c,
-	mdk-stage1/insmod-modutils/util/xmalloc.c,
-	mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h,
-	mdk-stage1/insmod-modutils/util/xftw.c,
-	mdk-stage1/insmod-modutils/include/elf_i386.h,
-	mdk-stage1/insmod-modutils/util/sys_gks.c,
-	mdk-stage1/insmod-modutils/util/snap_shot.c,
-	mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c,
-	mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h,
-	mdk-stage1/insmod-modutils/include/elf_ppc.h,
-	mdk-stage1/insmod-modutils/obj/obj_reloc.c,
-	mdk-stage1/insmod-modutils/include/elf_sparc.h,
-	mdk-stage1/insmod-modutils/util/sys_nim.c,
-	mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile,
-	mdk-stage1/insmod-modutils/include/elf_hppa.h,
-	mdk-stage1/insmod-busybox/insmod.c,
-	mdk-stage1/insmod-modutils/util/meta_expand.c,
-	mdk-stage1/insmod-modutils/util/arch64.c,
-	mdk-stage1/insmod-modutils/obj/obj_load.c,
-	mdk-stage1/insmod-modutils/obj/obj_hppa.c,
-	mdk-stage1/insmod-busybox/insmod.h,
-	mdk-stage1/insmod-modutils/include/elf_ia64.h,
-	mdk-stage1/insmod-modutils/obj/obj_ia64.c,
-	mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
-	mdk-stage1/insmod-modutils/include/elf_mips.h,
-	mdk-stage1/insmod-modutils/include/module.h,
-	mdk-stage1/insmod-modutils/obj/obj_mips.c,
-	mdk-stage1/insmod-modutils/util/sys_cm.c,
-	mdk-stage1/insmod-modutils/obj/obj_alpha.c,
-	mdk-stage1/insmod-modutils/include/kerneld.h,
-	mdk-stage1/insmod-modutils/util/xrealloc.c,
-	mdk-stage1/insmod-modutils/obj/Makefile,
-	mdk-stage1/insmod-modutils/insmod-frontend.c,
-	mdk-stage1/insmod-modutils/obj/obj_common.c,
-	mdk-stage1/insmod-modutils/include/modstat.h,
-	mdk-stage1/insmod-modutils/util/Makefile,
-	mdk-stage1/insmod-modutils/include/config.h,
-	mdk-stage1/insmod-modutils/util/logger.c,
-	mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
-	mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h,
-	mdk-stage1/insmod-modutils/util/config.c,
-	mdk-stage1/insmod-modutils/include/version.h,
-	mdk-stage1/insmod-modutils/include/kallsyms.h,
-	mdk-stage1/insmod-modutils/include/elf_alpha.h,
-	mdk-stage1/insmod-modutils/util/sys_oim.c,
-	mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
-	not
-	over existing /etc/fstab. Fix some stupid stuff
-
-	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
-	* install2.pm (main): don't set a special $remote_path PATH for
-	postInstallNonRooted
-	(otherwise install's modprobe is not used, and you can't "modprobe
-	vfat",
-	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
-	found.
-
-	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
-	non-scrolled
-
-2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c,
-	mdk-stage1/init-libc-headers.h,
-	mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile,
-	mdk-stage1/init.c, mdk-stage1/minilibc.h,
-	mdk-stage1/dietlibc/include/unistd.h,
-	mdk-stage1/dietlibc/include/sys/socket.h,
-	mdk-stage1/dietlibc/include/signal.h: have "init" compiled against
-	dietlibc (rather than glibc) on non-Intel arch's
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_auto_install.pm: $graphical is now a module variable. Can
-	be changed from everywhere
-
-	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
-	not
-	over existing /etc/fstab. Fix some stupid stuff
-
-	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path
-
-	* install2.pm (main): don't set a special $remote_path PATH for
-	postInstallNonRooted
-	(otherwise install's modprobe is not used, and you can't "modprobe
-	vfat",
-	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
-	found.
-
-	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
-	non-scrolled
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): fix setting
-	type to 'list' in
-	case of format. should be only set if type is unset
-	(ask_from_entries_refH_powered_normalize): if list+format then type is
-	'list', combo not accepted (hacky?)
-
-	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
-	call create_okcancel
-
-2001/02/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): if list+format
-	then type is
-	'list', combo not accepted (hacky?)
-
-	* install_steps_auto_install.pm: $graphical is now a module variable. Can
-	be changed from everywhere
-
-	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
-	call create_okcancel
-
-2001/02/21  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, netconnect.pm: netconnect recode, wizard compatible.
-	network.pm modified for wizard. Still need work for ask_yesorno,
-	ask_okcancel. +debugging of course
-
-	* standalone/draknet: updated (don't remember what)
-
-2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/Makefile,
-	mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c,
-	mdk-stage1/minilibc.h, mdk-stage1/minilibc.c,
-	mdk-stage1/init-libc-headers.h: 
-	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
-	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
-	  - cleanup of "init"
-
-	* mdk-stage1/init.c: 
-	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
-	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
-	  - cleanup of "init"
-	fix up syslog logging stuff
-
-2001/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (generateAutoInstFloppy): removed
-
-	* install_any.pm (g_auto_install): use selected_leaves for
-	default_packages to reduce the
-	list of packages (aka cleanup auto_inst.cfg)
-	(g_default_packages): created
-
-	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
-	and g_default_packages calls in
-	advanced
-
-	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
-	* pkgs.pm (selected_leaves): created
-
-	* install2.pm (main): do postInstallNonRooted before postInstall (so that
-	'modprobe
-	vfat' can be done in postInstallNonRooted and used in postInstall)
-	  - move the loadO of patch/defcfg after loading modules.dep
-	  - generateAutoInstFloppy is no more a step
-	  - removed use Data::Dumper
-
-2001/02/21  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Add iputils to SYSTEM.
-
-2001/02/21  dam's  <damien@mandrakesoft.com>
-
-	* docs/wizard.doc: putain de doc de merde pout petite qui est trop d�bile
-
-	* interactive.pm, my_gtk.pm: corrected wizard mode.
-
-2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/TECH-INFOS: sync doc with disk automatic installs
-
-	* mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk
-	installs
-
-2001/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/02/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (generateAutoInstFloppy): removed
-
-	* install_any.pm (g_auto_install): use selected_leaves for
-	default_packages to reduce the
-	list of packages (aka cleanup auto_inst.cfg)
-	(g_default_packages): created
-
-	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
-	and g_default_packages calls in
-	advanced
-
-	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use
-
-	* pkgs.pm (selected_leaves): created
-
-	* install2.pm (main): do postInstallNonRooted before postInstall (so that
-	'modprobe
-	vfat' can be done in postInstallNonRooted and used in postInstall)
-	  - move the loadO of patch/defcfg after loading modules.dep
-	  - generateAutoInstFloppy is no more a step
-	  - removed use Data::Dumper
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* printerdrake.pm: fix typo
-
-	* install_steps.pm, install_steps_gtk.pm, install_any.pm: better
-	advertising support
-
-2001/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP
-	installs, make use of Content-Length when available, to display
-	progressbar
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: various
-	  - pcmcia_config.patch now in tools (no more in install which is
-	removed)
-	  - copy xpm's (until step icons work with png's)
-	  - transform group icons in pngs
-
-	* modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various
-
-	* tools/pcmcia_config.patch: pcmcia_config.patch now here
-
-	* printerdrake.pm: fix typo
-
-	* install_any.pm, install_steps.pm, install_steps_gtk.pm: better
-	advertising support
-
-2001/02/20  warly
-
-	* share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate
-
-2001/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE
-	env variable to choose rpmrc file for rpmlib used
-	by DrakX, neccessary for live update from a 7.2 or older.
-	Check that if something goes wrong with rebuilddb, avoid removing
-	old rpm-3 db files.
-	Make sure live_install can start from top directory too.
-
-2001/02/20  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: various
-	  - pcmcia_config.patch now in tools (no more in install which is
-	removed)
-	  - copy xpm's (until step icons work with png's)
-	  - transform group icons in pngs
-
-	* modules.pm, class_discard.pm: various
-
-	* tools/pcmcia_config.patch: pcmcia_config.patch now here
-
-	* my_gtk.pm, Xconfigurator.pm: various
-	major move. now ask_from_list returns false when canceled (it doesn't
-	die 'ask_from_list canceled' anymore)
-
-	* interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm,
-	netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm,
-	any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list
-	returns false when canceled (it doesn't die 'ask_from_list canceled'
-	anymore)
-
-2001/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c: try to print errno's stuff when symlink to
-	/tmp/stage2 failed
-
-	* mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4
-
-2001/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Estonian file
-
-2001/02/19  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on
-	cancel
-
-	* my_gtk.pm (create_packtable): don't use attach_raw anymore (was a
-	sillyme)
-
-2001/02/18  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: typo
-	make fbastok happy about button placement.
-	little improvements.
-
-2001/02/16  dam's  <damien@mandrakesoft.com>
-
-	* install_gtk.pm: corrected xpm mask
-
-	* network.pm: wireless eth support corrected.
-
-	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
-	share/step-orange-on.xpm, share/step-green-on.xpm,
-	share/step-red-click.xpm: re added these xpm files against display mask
-	pb.
-
-2001/02/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/init.c: better ansi colors
-
-	* mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers
-
-	* mdk-stage1/stdio-frontend.c: display more nicely when there is a long
-	list to choose from (1, 2 or 4 columns)
-
-2001/02/15  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc
-
-2001/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix i_images
-
-	* fsedit.pm (suggestions_mntpoint): fix
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): fix i_images
-	(installPackages): traktolpilization and advertising
-
-	* Makefile (get_needed_files): copy png files instead of xpm's
-
-	* fsedit.pm (suggestions_mntpoint): fix
-
-	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
-	* share/list: add GdkImlib stuff
-
-	* perl2fcalls: add Gtk::Gdk::ImlibImage
-
-	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
-	if it exists
-
-2001/02/15  dam's  <damien@mandrakesoft.com>
-
-	* my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm,
-	install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to
-	test the faces2xpm stuff.
-
-	* share/step-orange-click.xpm, share/rpm-selected.xpm,
-	share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm,
-	share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm,
-	share/step-red-click.xpm, share/step-green-on.xpm,
-	share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm,
-	share/reload.xpm, share/rpm-semiselected.xpm,
-	share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm,
-	share/step-red-on.xpm: removed, png are used instead.
-
-	* standalone/draknet: updated internet and added eth conf
-
-	* share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead.
-	added png images
-
-	* share/step-red.png, share/step-orange.png, share/reload.png,
-	share/logo-mandrake.png, share/rpm-semiselected.png,
-	share/logo-mandrake-Desktop.png, share/rpm-installed.png,
-	share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png,
-	share/rpm-selected.png, share/step-orange-click.png,
-	share/step-green-click.png, share/step-green.png, share/rpm-base.png,
-	share/logo-mandrake2.png, share/ftin.png, share/help.png,
-	share/step-orange-on.png, share/step-green-on.png, share/ftout.png,
-	share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc,
-	share/rpm-unselected.png: added png images
-
-2001/02/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile (get_needed_files): copy png files instead of xpm's
-
-	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
-	if it exists
-	(selectKeyboard): give clicked as parameter
-
-	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup
-
-	* fsedit.pm (suggestions_mntpoint): fix typo
-
-	* share/list: add GdkImlib stuff
-
-	* perl2fcalls: add Gtk::Gdk::ImlibImage
-
-	* install_steps_interactive.pm (summary): better message for i18n
-
-	* install_steps_gtk.pm (installPackages): traktolpilization and
-	advertising
-
-2001/02/14  dam's  <damien@mandrakesoft.com>
-
-	* network.pm, standalone/draknet: wireless updated
-
-	* share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin
-	theme :)
-
-2001/02/14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): add user in group usb
-
-2001/02/14  dam's  <damien@mandrakesoft.com>
-
-	* share/themes-mdk.rc: valentin theme :)
-	added drawing theme section
-
-	* network.pm: wireless updated
-	updated wireless eth support
-
-	* standalone/draknet: wireless updated
-
-	* share/help.xpm, share/logo-mandrake.xpm: valentin theme :)
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: network con initiated in draknet.
-	netconnect improvement.
-	typo
-
-	* network.pm: typo
-	corrected domainname setting
-
-	* standalone/draknet: network con initiated in draknet.
-	netconnect improvement.
-
-2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/frontend.h, mdk-stage1/network.h,
-	mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c,
-	mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c,
-	mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff
-
-	* mdk-stage1/modules.c: ask for modules parameters everytime in expert
-	mode, to avoid wrong autodetections in certain cases
-	  - better log of nfs mount errors
-	  - don't insmod modules already present (important for bzip2 slowness)
-
-	* mdk-stage1/cdrom.c: better error msg thx to mcdtg
-
-	* mdk-stage1/mount.c, mdk-stage1/nfsmount.c: 
-	  - better log of nfs mount errors
-	  - don't insmod modules already present (important for bzip2 slowness)
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue
-	better console messages at startup
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: profile handling updated
-
-	* network.pm: typo
-	corrected domainname setting
-
-	* netconnect.pm: finished load_conf
-
-2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/make_rescue_img, rescue/list: include libs for hostname resolving
-
-	* mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at
-	startup
-
-	* mdk-stage1/tools.c: 
-	  - save /etc/resolv.conf for rescue
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
-	non-expert
-
-	* any.pm: md5 now done via crypt
-
-	* install_steps.pm (exitInstall): catch exception of output report.bug
-	(for gc)
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
-	non-expert
-
-	* tools/cvslog2changelog.pl: fix for gc & fpons
-	fix for fredl broken CVS
-
-	* any.pm: md5 now done via crypt
-
-	* install_steps.pm (exitInstall): catch exception of output report.bug
-	(for gc)
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* network.pm: experimental wireless eth support. Not tested
-
-2001/02/13  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/cvslog2changelog.pl: fix for gc & fpons
-	fix for fredl broken CVS
-
-	* c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can
-	be done via crypt of glibc, so remove all this
-
-2001/02/13  dam's  <damien@mandrakesoft.com>
-
-	* any.pm: merging difference
-
-	* netconnect.pm: corrected profile handling
-
-	* network.pm: experimental wireless eth support. Not tested
-
-2001/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
-	docs, rescue, tools)
-
-2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/probing.c: do not close un unbound socket!!
-
-	* c/stuff.xs.pm: close socket everytime in hasNetDevice
-
-	* mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future
-	potential confusions
-
-	* modules.pm: re include some network modules
-
-2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* rescue/list: fix vi trouble
-	  - add lspci, lspcidrake, vim-minimal
-	  - better /etc/issue
-	  - better PS1
-	  - write embryonic tool (installation of detected drivers according to
-	pci cards)
-
-	* rescue/aliases, rescue/tree/etc/issue: fix vi trouble
-
-	* rescue/list.i386, rescue/make_rescue_img, rescue/drvinst: 
-	  - add lspci, lspcidrake, vim-minimal
-	  - better /etc/issue
-	  - better PS1
-	  - write embryonic tool (installation of detected drivers according to
-	pci cards)
-
-2001/02/12  Pixel  <pixel@mandrakesoft.com>
-
-	* rescue/drvinst: pixelization
-
-	* docs/README: fix doc about Mandrake/base/compss
-
-	* install_steps_gtk.pm (choosePackagesTree): non first choice packages are
-	in "Other".
-
-	* install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate
-	partitions choice modified. diskdrake in expert asks what kind
-	of auto_allocation is wanted, others choose 'simple' in
-	%fsedit::suggestions
-
-	* install2.pm: auto_allocate partitions choice modified. diskdrake in
-	expert asks what kind
-	of auto_allocation is wanted, others choose 'simple' in
-	%fsedit::suggestions
-	(main): gc has done it again! /tmp/conf.modules is now
-	/etc/modules.conf,
-	so load both to keep compatibility.
-
-	* my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list)
-
-	* interactive_gtk.pm (ask_from_entries_refW): use
-	$common->{advanced_label}
-	(create_ctree): add keyboard shortcuts
-	(create_clist): moveto only if row_is_visible
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label
-	defaults to
-	_("Advanced")
-
-	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
-	docs, rescue, tools)
-
-	* install_steps_interactive.pm (configurePrinter): cleanup,
-	pkg_install_if_requires_satisfied('xpp',
-	'kups') only if a printer is configured (for the case when _("Would you
-	like to configure a printer?") is answered no)
-
-	* rescue/tree/etc/rc.sysinit: add floppy module for 2.4
-
-2001/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
-	* install_any.pm: add preConfigureTimezone
-	add step summary. remove steps configureTimezone and configurePrinter
-
-	* install_interactive.pm: cleanup
-
-	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
-	  - lang2keyboards handle keyboard percentages
-	  - xmodmaps now named keyboards
-
-	* install_steps_interactive.pm: add step summary. remove steps
-	configureTimezone and configurePrinter, modify selectKeyboard
-
-	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
-	steps configureTimezone and configurePrinter
-
-	* netconnect.pm: corrected back $install call
-
-2001/02/10  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
-	  - lang2keyboards handle keyboard percentages
-	  - xmodmaps now named keyboards
-
-	* install_steps_interactive.pm: add step summary. remove steps
-	configureTimezone and configurePrinter, modify selectKeyboard
-
-	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given
-
-	* install_any.pm: add preConfigureTimezone
-	add step summary. remove steps configureTimezone and configurePrinter
-
-	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
-	steps configureTimezone and configurePrinter
-
-	* install_interactive.pm: cleanup
-
-	* netconnect.pm: corrected back $install call
-
-2001/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, install2.pm,
-	timezone.pm: configureTimezone doesn't take parameter
-	/etc/sysconfig/clock
-
-2001/02/09  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button
-	handling, quite weird behaviour though cuz of newt sillyness
-
-	* install2.pm: configureTimezone doesn't take parameter
-	/etc/sysconfig/clock
-	(main): have compatibility with old stage1 (rhimage -> image)
-	(formatPartitions):
-	s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans|
-	as it should now be (see lang.pm 1.143)
-
-	* install_steps.pm, install_steps_interactive.pm, timezone.pm:
-	configureTimezone doesn't take parameter /etc/sysconfig/clock
-
-2001/02/09  siegel
-
-	* share/po/de.po: new german version
-
-2001/02/08  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakgw: implemented or updated embedded mode
-	added embedded and (ugly) wizard mode.
-
-	* standalone/printerdrake, standalone/mousedrake, standalone/diskdrake,
-	standalone/keyboarddrake: implemented or updated embedded mode
-
-	* standalone/draknet: implemented or updated embedded mode
-	added embedded mode
-
-	* standalone/XFdrake: implemented or updated embedded mode
-	corrected compilation bug.
-
-	* standalone/drakboot: implemented or updated embedded mode
-	updated embedded mode. Should work, not tested in real world
-
-	* netconnect.pm: removed testing wizard instruction
-
-2001/02/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* ftp.pm: fixed wrong URLPREFIX formation if no user given.
-
-	* standalone/XFdrake: fix the previous changelog wich was wrong (bad
-	spelling),
-	added a char in comment to allow a new release (thanks to pixel :-)
-	make sure SHARE_PATH is set.
-	fixed SHARE_PATH to make sure it is setted.
-
-	* Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer
-	XF3 for SiS card.
-
-	* pkgs.pm: fixed problem for updating hdlist after going back to partition
-	step.
-
-2001/02/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c:
-	better memory detection (from wonderful drakx)
-
-2001/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Norwegian file
-
-2001/02/08  Pixel  <pixel@mandrakesoft.com>
-
-	* common.pm (availableRamMB): cleanup
-
-	* standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in
-	standalone
-
-2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed unknown package ARRAY... and locales selection
-	according to langs.
-
-	* modules.pm: fixed module name without text for SCSI configuration
-	dialog, add log.
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c,
-	mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c,
-	mdk-stage1/network.c: 
-	  - use description of network cards when you have to select between
-	interfaces; has accuracy even in the case of multiple interface for a
-	given kernel module
-	  - write down a small "shell" to change parameters on the fly (needs
-	compile option SPAWN_INTERACTIVE)
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): better fix for getting
-	max install size.
-	(choosePackages): call setSelectedFromCompssList with empty
-	compssUsersChoice meaning max
-
-	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixed unknown package ARRAY... and locales selection
-	according to langs.
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): better fix for getting
-	max install size.
-	(choosePackages): call setSelectedFromCompssList with empty
-	compssUsersChoice meaning max
-
-	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* share/rpmsrate: Add usbd to SYSTEM.
-
-2001/02/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: updated wizard mode, intro and other stuff
-
-	* interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode
-
-	* share/logo-mandrake.xpm: new logo
-
-2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too)
-	caused by forked DrakX
-	with latent ftp connection.
-
-2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
-	8.0
-
-	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
-	hostname+domain
-
-2001/02/07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(
-
-	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)
-
-	* install_steps_interactive.pm (miscellaneous): remove asking about
-	numlock and hd optimizations,
-	deprecates it (aka don't do anything)
-
-	* Xconfigurator.pm (main): don't need isLaptop anymore, use
-	detect_devices::hasPCMCIA
-
-	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
-	value of memsize
-	if given
-	(install): save CLEAN_TMP in sysconfig/system
-	(get_append, add_append): get or set an append value
-	(has_profiles, set_profiles): get or add an entry office for profiles,
-	also add prof=Home in
-	the default entry
-
-	* any.pm (setupBootloader): take care of profiles and memsize
-	(facesnames): only display icons capitalized. This goes along the new
-	mandrake_desk where capitalized named faces are the new one. [a-z].*
-	icons
-	being only kept for compatibility. (in case no capitalized icons
-	available
-	display everything (compatibility with old mandrake_desk)
-
-	* standalone/draknet, standalone/XFdrake: don't pass isLaptop
-
-	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
-	taking care of
-	profiles and memsize. Now in any & bootloader
-	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
-	$o->{miscellaneous} anymore
-
-	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm
-
-	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions
-
-	* install2.pm (@installSteps): remove miscellaneous
-	(main): don't remove pcmcia modules anymore (not there anymore), remove
-	/sbin/stage1
-
-2001/02/07  siegel
-
-	* share/po/de.po: new german version
-
-2001/02/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid
-	opening
-	and closing connection too fast for each transaction). There seems
-	to be some problem for retrieving twice a package, this cause huge pause
-	between each transaction, the best is to avoid them so ?
-
-2001/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c,
-	mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c,
-	mdk-stage1/modules.c, mdk-stage1/disk.c: 
-	  - slighty change the message when exiting successfully from install,
-	to not mess with abnormal termination
-	  - get back dialog for hostname and domain in case of unable to guess
-	domain
-	  - try to resolve DNS if self-ip can't resolve, to guess domain
-	  - remember entries so that when there is a problem you don't have to
-	re-enter everything (ncurses sucking stuff in case of stdio-frontend..)
-	  - use larger buffer for list_directory since in /dev there can be
-	*many* files
-
-2001/02/05  dam's  <damien@mandrakesoft.com>
-
-	* Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles.
-
-	* standalone/draknet: added infos recovering.
-
-	* netconnect.pm: added load_conf() to recover saved infos from conffile.
-
-2001/02/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: removed abusive white char.
-	updated to use urpmi new format (change fakemedium to better label)
-	fixed frame buffer usage if not enabled (installation of Aurora)
-	clean up and remove unused code.
-
-	* ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore.
-
-	* pkgs.pm: updated to use urpmi new format (change fakemedium to better
-	label)
-
-	* Xconfigurator.pm: Removed Device3Dfx as it is no more.
-
-	* install_steps.pm: fixed frame buffer usage if not enabled (installation
-	of Aurora)
-	clean up and remove unused code.
-
-2001/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/list: updated list of gconv modules
-
-2001/02/05  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (head_tail): fix usage
-
-	* interactive_gtk.pm (create_ctree): node_moveto done only if
-	node_is_visible is not full
-
-2001/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with
-	file-not-found in args
-
-2001/02/04  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_newt.pm: fix adaptation to the terminal size, should now
-	work in 80x25
-
-	* Xconfigurator.pm (monitorConfiguration): better handling of auto_install
-
-	* install_steps_interactive.pm (choosePackages): don't call
-	chooseSizeToInstall even with experts
-
-	* install_steps_gtk.pm (charsetChanged): re-create steps window
-
-2001/02/03  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm, standalone/draknet, netconnect.pm: corrected module.conf
-	update, net conf saving, and no wizard by default.
-
-2001/02/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2001/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
-	auto_installs
-
-	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
-	the right charset the windows
-
-	* install_steps_interactive.pm (selectLanguage): call charsetChanged
-
-	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
-	move ftp to SYSTEM so that it is installed
-
-	* Makefile: install cardmgr
-
-	* modules.pm (configure_pcmcia): cleanup
-
-2001/02/03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
-	auto_installs
-
-	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
-	the right charset the windows
-
-	* install_steps_interactive.pm (selectLanguage): call charsetChanged
-
-	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
-	move ftp to SYSTEM so that it is installed
-
-	* Makefile: install cardmgr
-
-	* modules.pm (configure_pcmcia): cleanup
-
-2001/02/02  dam's  <damien@mandrakesoft.com>
-
-	* share/wizard.rc: added rc file for wizard mode
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
-	fails and
-	auto_install and not provided any info about the monitor
-
-	* my_gtk.pm (gtkcreate_xpm): error handling with error message
-
-	* share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP
-
-	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
-	/etc/sysconfig/i18n
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-	* install_any.pm (setPackages): in auto_installs, default to all groups
-	chosen, unless
-	compssUsersChoice exist. Won't change anything unless compssListLevel is
-	used of course
-
-	* Xconfigurator_consts.pm: add low_default_monitor for default of
-	auto_installs
-
-	* interactive_gtk.pm (ask_from_entries_refW): use gtkxpm
-
-	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
-	diskdrake.pm: using the new formatXiB
-
-	* detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to
-	the fact that kernel
-	2.4 uses /proc/driver/array instead of /proc/array. Also adapted the
-	regexp now that ida/c0d0p? is no more at the beginning of the line.
-	(get): cleanup, remove hasIDE hasSCSI...
-
-	* common.pm (formatXiB): created, format a number in human readable format
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-2001/02/02  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm,
-	standalone/diskdrake: recoded wizard mode
-	corrected some stuff.
-	trying not to break draknet for cooker snapshot
-
-2001/02/02  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
-	fails and
-	auto_install and not provided any info about the monitor
-
-	* install_any.pm (setPackages): in auto_installs, default to all groups
-	chosen, unless
-	compssUsersChoice exist. Won't change anything unless compssListLevel is
-	used of course
-
-	* share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i
-	chose was glibc-2.1 :-(
-	this one en_US and seems all right!
-
-	* Xconfigurator_consts.pm: add low_default_monitor for default of
-	auto_installs
-
-	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
-	diskdrake.pm: using the new formatXiB
-
-	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
-	/etc/sysconfig/i18n
-
-	* common.pm (formatXiB): created, format a number in human readable format
-
-	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
-	/tmp/hdimage to /tmp/disk without even
-	telling, changing it back as i don't see any good reason for the move.
-
-2001/02/01  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: new draknet snapshot. Still unuseable
-
-	* interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in
-	install.
-
-2001/01/31  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: corected translation and conflict.
-
-2001/01/31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: added missing die if modprobe failed on live upgrade.
-
-	* pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm
-	file
-	if everything has been successfull.
-
-	* install_steps.pm: changed to clean selection for non expert as used for
-	group selection
-	because it is not cleaned, need better solution TODO.
-
-2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES
-	BEFORE COLON (:);
-	and it is "Profile" and not "Profil")
-	CV:
-	----------------------------------------------------------------------
-
-2001/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackagesTree): created, simple
-	ask_many_from_list to choose
-	individual packages
-	(choosePackages): log for debug
-	(choosePackages): don't ask to install in beginner. Max is chosen
-	(setRootPassword): help not based on installClass being server or not
-	(selectInstallClass): remove installClass choice (was
-	normal/devel/server)
-	(chooseGroups): fix for individual package selection flag
-
-	* netconnect.pm (get_net_device): more cleanup syntax
-	(get_net_device): cleanup syntax
-
-	* install_steps.pm (selectLanguage): warning for debug
-	(miscellaneousBefore): don't use installClass to decide to use
-	supermount
-	or not. Choice is done on $::corporate. Can't say "no supermount in
-	server
-	installs" anymore
-	(selectInstallClass): emptied
-	(setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
-	* install_any.pm (g_auto_install): installClass removed
-	(setPackages): do not preselect compssUsers entries
-
-	* install2.pm (main): don't set installClass=normal meta_class desktop
-	(deprecated)
-	(miscellaneous): TYPE= removed (was installClass)
-	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
-	ask in a set of possibilities
-	($o): replace fclass by fbeginner and fexpert
-	($o): default security level to 2 since it can't be based on
-	installClass (deprecated)
-
-	* install_steps_gtk.pm: restore window size for time being
-
-	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
-	* Xconfigurator.pm (main): better error message for auto_install failing
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
-	drakx. Still
-	need finding the guilty
-
-2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: more kbd corrections
-	fixed soem keybopard values
-
-2001/01/31  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackagesTree): created, simple
-	ask_many_from_list to choose
-	individual packages
-	(choosePackages): log for debug
-	(choosePackages): don't ask to install in beginner. Max is chosen
-	(setRootPassword): help not based on installClass being server or not
-	(selectInstallClass): remove installClass choice (was
-	normal/devel/server)
-	(chooseGroups): fix for individual package selection flag
-
-	* install_steps.pm (selectLanguage): warning for debug
-	(miscellaneousBefore): don't use installClass to decide to use
-	supermount
-	or not. Choice is done on $::corporate. Can't say "no supermount in
-	server
-	installs" anymore
-	(selectInstallClass): emptied
-	(setupSCSI): don't configure PCMCIA if there is no PCMCIA
-
-	* install_any.pm (g_auto_install): installClass removed
-	(setPackages): do not preselect compssUsers entries
-
-	* install2.pm (main): don't set installClass=normal meta_class desktop
-	(deprecated)
-	(miscellaneous): TYPE= removed (was installClass)
-	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
-	ask in a set of possibilities
-	($o): replace fclass by fbeginner and fexpert
-	($o): default security level to 2 since it can't be based on
-	installClass (deprecated)
-
-	* install_steps_gtk.pm: restore window size for time being
-
-	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate
-
-	* Xconfigurator.pm (main): better error message for auto_install failing
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
-	drakx. Still
-	need finding the guilty
-
-2001/01/30  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: new draknet. unstable
-
-	* netconnect.pm: updated
-	debugged network card configuration after pixelisation.
-
-2001/01/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from
-	trying to set progressbar to more than 100% (rescue is more compressed
-	than drakx)
-
-	* share/rpmsrate: add ldetect to config stuff I want to have on all
-	installs (lspcidrake)
-
-2001/01/30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm, netconnect.pm, install_interactive.pm:
-	adapt format functions given to ask_from_listf. $_ is no more set
-
-	* mouse.pm (detect): replace commands::modprobe by modules::load as it
-	should (or??)
-
-	* perl2etags: adapt to new etags (emacs 21) format
-
-	* raid.pm (make): replace commands::modprobe by modules::load as it should
-	(or??)
-
-	* perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his
-	regexps
-
-	* share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number
-	separator instead of ".".
-	The sheer result is:
-	"0.6" * 10  gives 0
-	"0,6" * 10  gives 6
-	
-	So i have overwritten misc/LC_NUMERIC with
-	/usr/share/locale/en/LC_NUMERIC and
-	it works nicely now :)
-
-2001/01/29  dam's  <damien@mandrakesoft.com>
-
-	* standalone/drakboot: corrected typo
-
-2001/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: 
-	  - deprecate "hdreiser.img" since we have room for "reiserfs.o" in
-	"hd.img"
-	  - following deprecation of "other.img", reintegrate big modules in
-	relevant boot disks
-
-2001/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/po/et.po: updated Estonian file
-
-2001/01/29  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain
-	more than one ida/c0d0p*
-
-2001/01/28  dam's  <damien@mandrakesoft.com>
-
-	* share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
-	bug causing reiserfs partitions
-	not to be displayed/asked for formatting. The default value being used.
-
-	* any.pm (get_autologin): adapt to new format of sysconfig/desktop
-
-2001/01/28  siegel
-
-	* share/po/de.po: new german version
-
-2001/01/26  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: updated embedded mode
-
-	* standalone/drakboot: added embedded mode
-
-2001/01/26  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile
-	bzlib
-
-	* mdk-stage1/stage1.c: restore passing of pcmcia info to stage2
-
-	* mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c,
-	mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c,
-	mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c,
-	mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile,
-	mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c,
-	mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: 
-	  - use bzlib instead of zlib to reduce overall size
-	  - take home my own bzlib code to (1) reduce code size with good
-	compile options (2) make it compile and link against dietlibc
-
-	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h,
-	mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h,
-	mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/26  siegel
-
-	* share/po/de.po: .
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (installPackages): prepare for advertising...
-
-	* interactive_newt.pm (ask_from_entries_refW): major rework for new
-	format, still need work
-	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
-	NEWT_FLAG_HIDDEN
-	(myTextbox): wrap the text if needed
-	(myTextbox): use a vertical scrollbar if needed
-
-	* Newt/Newt.xs (newtFormAddGrid): new name for
-	newtGridAddComponentsToForm, swap
-	parameters for much better understanding
-	(newtListboxGetCurrent): returns a SV (together with
-	newtListboxAddEntry)
-	(newtListboxAddEntry): data is now a SV
-
-2001/01/25  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: disable steps 'packages choice', 'configure X', and
-	'configure' 'printer'
-
-	* install_steps_interactive.pm: don't oblige user addition
-
-	* network.pm: display ethernet module
-
-	* netconnect.pm: network informations filled into
-	$prefix/var/lib/naat/configuration
-
-2001/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh ->
-	/usr/bin/sh for stage2
-
-	* mdk-stage1/probing.h: better tightness of probing stuff
-
-	* mdk-stage1/probing.c: better tightness of probing stuff
-	print warning message when insmod of PCI-detected device fails
-
-	* mdk-stage1/stage1.c: 
-	  - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives
-	  - remove fat/vfat modules from some boot floppies now that we don't
-	need it anymore
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of
-	tulip network cards, kernel-2.4 has strange way to classify some of its
-	net modules..
-
-2001/01/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: Waw, italian translator is very fast :)
-	updated Indonesian and Italian fiels
-
-	* share/po/id.po: updated Indonesian and Italian fiels
-
-	* share/locales.tar.bz2: added iso9 locale definitions
-
-	* lang.pm: fixed LANGUAGE for mk locale
-
-2001/01/25  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (spawnShell): fix error message
-
-2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: 
-	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
-	  - remove unecessary device files
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
-	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
-	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
-	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
-	* install_steps.pm (afterInstallPackages): cleanup
-
-	* interactive.pm: better documentation of ask_from_entries_refH features
-	(entry)
-
-2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2: 
-	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
-	  - remove unecessary device files
-
-	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
-	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
-	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
-	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
-	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
-	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
-	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
-	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
-	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
-	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
-	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
-	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia
-
-2001/01/24  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun
-
-	* install_steps.pm (afterInstallPackages): cleanup
-
-	* interactive.pm: better documentation of ask_from_entries_refH features
-	(entry)
-
-2001/01/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file
-
-2001/01/22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm, netconnect.pm: corrected slide bar, and
-	added network conf save in /root/networking.tmp
-
-2001/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/network.c: add automatic support in choice of NET device, in
-	case of multiple NET devices
-	consistent dot-terminated error messages, consistent no-dot log messages
-	re-put Netmask input per default (void entry -> automatic guess)
-
-	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent
-	dot-terminated error messages, consistent no-dot log messages
-
-2001/01/22  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/id.po: updated Indonesian file
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
-	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
-	share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated po files
-
-	* share/po/wa.po: updated po files
-	updated pot file
-
-	* install2.pm, lang.pm: fixed the places where console fonts and related
-	files are put under
-	/etc/sysconfig to the places really used by console-tools
-
-	* share/po/DrakX.pot: updated pot file
-
-	* share/po/hr.po: updated po files
-	updated Croatian file
-
-2001/01/22  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way,
-	read_rpmsrate
-	can be called standalone.
-
-	* network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm,
-	install_interactive.pm, install2.pm, partition_table.pm, install_any.pm,
-	any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is
-	deprecated, replaced by !$::expert
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
-	network/ftp installs
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
-	network/ftp installs
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (create_ctree): fix case with formatted list
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's
-
-2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/nfsmount.c: fix remaining perror's
-
-	* mdk-stage1/stage1.c: fix remaining perror's
-	  - better msg in fatal errors
-	  - do not include code to spawn a shell for releases
-
-2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files
-
-2001/01/21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectMouse): use ask_from_treelist_
-
-	* interactive.pm (ask_from_treelist_): created, split with the separator,
-	call translate on
-	words, then re-join.
-
-2001/01/19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: fixes for CD not changeable.
-
-	* install_steps_interactive.pm: fixed unselect group and inoperant
-	individual package selection.
-	removed expert mode and install class.
-
-2001/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: fixed obligation of relative large install, now
-	minimum is lesser.
-
-	* install_steps_gtk.pm: make sure no ratio above 1 can occur, still need
-	to see why as it happens
-	on install-abort-choices-install or
-	install-abort-choices-fs-format(none)-choices-install
-
-	* live_install: update live install to match /tmp/image instead of
-	/tmp/rhimage.
-
-2001/01/17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, install_any.pm: fixes with /tmp/rhimage and
-	/tmp/image.
-
-	* pkgs.pm: update to use new header file format in hdlist (added arch) but
-	depslist has not it...
-
-	* install2.pm: fixes with /tmp/rhimage and /tmp/image
-
-2001/01/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/bg.po: updated bulgarian file
-
-2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/url.c: use strrchr instead of doing it by hand
-
-	* mdk-stage1/insmod-busybox/busybox.h,
-	mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c:
-	
-	  - replace remaining perror's with log_perror's
-	  - little code cleanup
-
-	* mdk-stage1/stage1-data/stage1.tar.bz2,
-	mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c,
-	mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: 
-	  - add load of third party modules in Expert mode (PS rulz)
-
-2001/01/12  siegel
-
-	* share/po/de.po: updates
-
-2001/01/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed addUser for invocation of
-	any::ask_users.
-	fixed bad invocation of installation of X server.
-
-2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/cdrom.c: add more memory carefulness with CDROM install
-	  - add wait_message for initializing of CDROM's (it can be long when
-	it's SCSI)
-	  - print CDROM drive names (model) in dialogs
-
-	* mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: 
-	  - fix behaviour with bad ISO images (DISK installs)
-	  - better dialogs for DISK installs
-
-2001/01/12  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: make lang list in format for tree-selector
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/disk.c: fix failing umount for DISK installs in some failing
-	loopback situations
-	act nicely when no partitions are found on some disk
-
-	* mdk-stage1/modules.h: polish generic blank.img situation (no modules
-	and/or modules.dep available)
-
-	* mdk-stage1/lomount.c: fix failing umount for DISK installs in some
-	failing loopback situations
-	better log messages
-	continue anyway when insmod'ing of modules fail (for blank.img)
-
-	* mdk-stage1/probing.c: close some fd's
-
-	* mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img
-	situation (no modules and/or modules.dep available)
-	continue anyway when insmod'ing of modules fail (for blank.img)
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/Makefile, mdk-stage1/disk.c: 
-	  - add DISK install from ISO image file
-	  - add FTP
-	  - add HTTP
-	  - use single place for mountpoints and static directories
-
-	* mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: 
-	  - add DISK install from ISO image file
-
-	* mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
-	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
-	mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: 
-	  - add FTP
-	  - add HTTP
-	  - use single place for mountpoints and static directories
-
-	* mdk-stage1/insmod-busybox/Config.h: tweak config
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: adduserdrake may handles autologin
-
-	* install_steps.pm (addUser): set autologin
-
-	* install2.pm (addUser): moved setAuthentication to install_steps::addUser
-
-	* install_steps_interactive.pm (addUser): fix
-
-2001/01/11  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm, ChangeLog,
-	netconnect.pm: updated
-
-2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when
-	mar or marfiles not available to perform consistency check
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* interactive_gtk.pm (create_ctree): fix default value selecting failing
-	(in case of "format")
-	(ask_from_entries_refW): apply "format" on label when icon is missing
-	for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
-	icon is missing for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at
-	the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake
-	and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/11  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): moved to package any
-
-	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
-	icon is missing for iconlist
-	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
-	the cancel.
-
-	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
-	add 'XFree86-' at
-	the beginning
-	(addUser): use any::write_passwd_user
-	(setRootPassword): use any::write_passwd_user
-	(configureX): fix bad $install given to Xconfigurator::main
-
-	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
-	(ask_users): created, interactively ask users to add (used in
-	adduserdrake
-	and install)
-	(allocUsers, addUsers): changed the prototype
-	(setupBootloader): grep out fat partitions for the "Boot device"
-	propositions (people are too stupid)
-
-	* my_gtk.pm (main): third argument is a function to call before leaving in
-	case of
-	"cancel" clicked.
-
-	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
-	modifying it
-
-	* Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated)
-
-	* install_steps_interactive.pm (addUser): use any::ask_users
-
-	* standalone/adduserdrake: use any::ask_users
-
-	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
-	install2::main)
-
-	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
-	here
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
-	callback defaults
-	to "sub { 0 }"
-
-2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal
-	size
-
-	* mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c:
-	remove warnings from compile
-
-2001/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
-	callback on clist/list/ctree
-
-	* install_steps.pm (addUser): use any::pack_passwd
-	(setRootPassword): use any::unpack_passwd and any::pack_passwd
-
-	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
-	generic
-	(autologin): use $install which is now generic
-
-	* install_steps_interactive.pm (selectLanguage): many_languages choice
-	moved there as advanced
-
-	* my_gtk.pm (create_packtable): yet another try to have something nice :)
-	!! uses Gtk::Table::attach_raw which is available in
-	perl-GTK-0.7004-6mdk !!
-	(create_box_with_title): with the size given to set_usize for the scroll
-	containing the text widget in case of long text. and don't let the
-	scroll
-	grow.
-	(gtktext_insert): remove adding an ending "\n" (no more needed?)
-
-	* any.pm (setAutologin): cleanup
-	(pack_passwd, unpack_passwd): created
-
-2001/01/10  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: corrected last message . firewall
-
-2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm,
-	parport*, plip)
-
-2001/01/10  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
-	callback on clist/list/ctree
-
-	* install_steps.pm (addUser): use any::pack_passwd
-	(setRootPassword): use any::unpack_passwd and any::pack_passwd
-
-	* my_gtk.pm (create_packtable): yet another try to have something nice :)
-	!! uses Gtk::Table::attach_raw which is available in
-	perl-GTK-0.7004-6mdk !!
-	(create_box_with_title): with the size given to set_usize for the scroll
-	containing the text widget in case of long text. and don't let the
-	scroll
-	grow.
-	(gtktext_insert): remove adding an ending "\n" (no more needed?)
-
-	* any.pm (setAutologin): cleanup
-	(pack_passwd, unpack_passwd): created
-
-	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
-	generic
-	(autologin): use $install which is now generic
-
-	* install_steps_interactive.pm (selectLanguage): many_languages choice
-	moved there as advanced
-
-	* standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2,
-	standalone/livedrake, standalone/drakboot, standalone/draksec,
-	standalone/netdrake, standalone/mousedrake, standalone/drakgw,
-	standalone/drakxservices, standalone.pm, standalone/draknet,
-	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
-	standalone/drakxconf: use standalone and standalone::pkgs_install
-
-2001/01/09  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (drakx_version): nicer (4gc)
-
-	* install2.pm (main): log::l the drakx_version
-
-	* my_gtk.pm (create_packtable): no_expand option added
-
-	* interactive.pm (ask_from_entries_refH_powered_normalize): field
-	"disabled" added,
-	"advanced_messages" added
-
-	* lang.pm (langs): created (transform the $o->{langs} hash ref in a list)
-	(pack_langs): use lang::langs
-
-	* install_steps.pm (selectLanguage): $o->{langs} is now a ref so
-	initialize as such
-
-	* Makefile (get_needed_files): generate /usr/share/VERSION which contains
-	the version
-	of ChangeLog (which is updated at each upload)
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): handle "check
-	for bad blocks" as advanced
-	(setRootPassword): remove choosing non-md5 or non-shadow passwords.
-
-	* install_any.pm (setPackages): use lang::langs instead of using
-	$o->{langs} as a array ref (it is not so anymore)
-	(spawnShell): print the drakx_version
-
-2001/01/08  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm: fixes
-	(ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH
-	(ask_from_entries_refH_powered): remove "1;" (was there for debugging)
-
-	* interactive_gtk.pm: fixes
-	(ask_from_treelistW): removed
-	(create_ctree): created, used for ``type => treelist'' entries
-
-	* my_gtk.pm: fixes
-
-	* ChangeLog: New snapshot uploaded
-
-2001/01/07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated
-	Czech, Norwegian and Serbian files
-
-2001/01/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm: update code for new ask_from_entries_refH
-	which doesn't handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-	(selectLanguage, selectKeyboard): use ask_from_entries_refH instead of
-	ask_from_listf_, it enables the use of advanced
-
-	* any.pm, printerdrake.pm: update code for new ask_from_entries_refH which
-	doesn't handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-
-	* interactive.pm: update code for new ask_from_entries_refH which doesn't
-	handle optional ok/cancel names in arg 1.
-	must be handled via ask_from_entries_refH_powered
-	(ask_from_listf_no_check): replaces ask_from_list_no_check
-	(ask_from_entries_refH_powered): sorts the list if needed or wanted
-
-	* partition_table_raw.pm (test_for_bad_drives): created
-	- ugly stuff needed mainly for Western Digital IDE drives
-	- try writing what we've just read, yells if it fails
-	- testing on last sector of head #0 (unused in 99% cases)
-
-	* ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an
-	non-existent
-	file, stressing the ftp server :-/ )
-	for the moment, just release cdrom.img, hd.img and hdreiser.img
-	others should should come...
-
-	* install_steps.pm: for the moment, just release cdrom.img, hd.img and
-	hdreiser.img
-	others should should come...
-
-	* interactive_gtk.pm (ask_from_listW): removed
-	(create_list): calls "format" on list elems before prompting them
-	(create_clist): created
-	(ask_from_entries_refW): calls create_clist in case of list with no help
-
-	* install_steps_gtk.pm (installPackages): autoflush stdout before beeping
-	(installPackages): don't take into account the time when prompting the
-	user
-
-	* common.pm (may_apply): added
-
-	* install_any.pm (getHds): test_for_bad_drives called on hard drives
-	(getHds): ensure $o->{hds} is not set until the hard drives are checked
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* ChangeLog: New snapshot uploaded
-	New snapshot uploaded
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* ChangeLog: New snapshot uploaded
-
-2001/01/06  Pixel  <pixel@mandrakesoft.com>
-
-	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset
-
-	* standalone/rpmdrake: deprecated (and has been for a long time now)
-
-	* network.pm, install_steps_interactive.pm, netconnect.pm,
-	install_interactive.pm, standalone/adduserdrake, any.pm,
-	Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm:
-	ask_from_entries_refH parameter format has changed so change all
-	accesses to it.
-
-2001/01/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: forget _exit in child process after a fork of
-	DrakX
-	removed need of packdrake binary
-
-	* Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames
-
-	* live_install2: cleanup to keep libperl.so but the right one
-
-	* live_install: no more copy of files on live system, now use environment
-	variable by DrakX cleanup
-
-	* perl2fcalls: added packdrake call (via new but incomplete) and package
-
-	* install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary
-
-	* netconnect.pm: fixed syntax error
-
-	* modules.pm: eval insmoding ide-cd (just in case)
-	removed need of packdrake binary
-
-2001/01/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan
-	and Japanese files
-
-2001/01/05  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm: help cperl-mode
-
-	* interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm,
-	interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to
-	new ask_from's:
-	- ask_from_entries_ref is deprecated, use ask_from_entries_refH
-	- ask_from_list now calls ask_from_entries_refH_powered
-	still not done:
-	- ask_from_treelist should use ask_from_entries_refH_powered,
-	and lists with no help should use CList (List is bad)
-	- keyboard and mouse binding is still rough
-	- enhance the look
-
-	* keyboard.pm: add the percentage of each keyboard types (as a comment for
-	now)
-
-2001/01/04  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: cleaned... everything should be buggy.
-
-2001/01/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed some old $p->{file} by new $p->[$FILE]
-	code cleanup and fixes for lilo not upgrade
-
-2001/01/04  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* install_any.pm: fixed the functions doing the lists of languages
-
-	* lang.pm: fixed the functions doing the lists of languages
-	The list of languages now has complete locale names insted of just
-	language
-	code (that is needed to differentiate zh_CN and zh_TW among others)
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file
-
-	* share/po/eu.po: updated Basque file
-	updated Brazilian file
-
-2001/01/04  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: some pixelization using the new if_
-
-	* install_steps_interactive.pm (setRootPassword): fix pixelization
-	keep $o->{langs} unpacked to simplify things
-	if_ pixelization
-
-	* common.pm (%EXPORT_TAGS): add if_ in "common" exported tags
-	(if_): created. Use it to replace things like
-	($::expert ? $val : ()) by if_($::expert, $val)
-
-	* keyboard.pm: nl keyboard is not used, so defaults to us_intl
-
-	* lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs}
-	unpacked to simplify things
-
-	* netconnect.pm: quite a few clean-up (and buggying)
-
-2001/01/03  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm: admin user removed before beeing added
-
-	* netconnect.pm: corrected typo
-	LAN is configured with default value if firewall
-
-2001/01/03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: fixed invocation of change_type by clicking on legend
-	unless expert
-
-	* install2.pm: fixed usage with testing
-
-	* install_steps.pm: fixed some other services to start in case something
-	gets wrong,
-	this fixes some deadlock on upgrade from 7.0.
-	fixed usage with testing
-
-	* partition_table.pm: fixed overlapping partitions between one extended
-	and one regular primary.
-	should be accepted (log printed instead of error) as diskdrake allow
-	their
-	creation in expert.
-
-2001/01/03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: add checks of dependencies on marfiles
-	fix a couple of broken dependencies in modules.pm
-
-2001/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format
-
-2001/01/03  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the setting of PATH and spawnShell *after*
-	setting $prefix
-
-2000/12/31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/rpmsrate: added a few locales dependences
-
-2000/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (addUser): typo fix
-
-	* ChangeLog: New snapshot uploaded
-
-	* ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/29  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (addUser): typo fix
-
-	* ftp.pm (getFile): recall getFile after rewindGetFile
-
-2000/12/28  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and
-	jako
-
-2000/12/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* keyboard.pm: Add the very ghost option REMOVE_MOD_META_L.
-
-2000/12/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated Lithuanian file
-
-2000/12/22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps.pm, install_steps_interactive.pm: corrected admin user
-	setting for firewall install.
-
-2000/12/22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm: fixed load_multi on live.
-	added back all removed module with the new great mdk-stage1 of g�g�.
-
-2000/12/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* modules.pm: make them work with kernel-2.4 by disabling non existent
-	modules
-
-2000/12/22  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage
-
-2000/12/21  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: New snapshot uploaded
-
-2000/12/21  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: firewall : automatic class set when firewall (beginner=0)
-
-	* install_steps_interactive.pm: if firewall, admin password obliged
-
-	* install_steps.pm: added setAdminpassword (a little bit redundant, sorry)
-
-	* any.pm: corrected module stuff.. Thanx to pixel
-
-2000/12/20  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectMouse): unsure the device exists
-
-	* unused/christmas-karaoke.patch: handle isa cards
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* ChangeLog: New snapshot uploaded
-	New snapshot uploaded
-
-2000/12/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
-	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
-	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
-	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
-	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
-	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
-	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
-	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
-	standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
-	* unused/christmas-karaoke.patch: Happy Christmas :)
-
-	* install_any.pm: spawnShell: set DISPLAY, just in case :)
-
-	* install2.pm: set PATH before doing spawnShell
-
-	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-	* ChangeLog: New snapshot uploaded
-
-2000/12/18  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: added embedded support for control-center
-	corrected embedded support.
-	new control center and related
-
-	* netconnect.pm: corrected typo
-	corrected typo
-
-	* standalone/drakxservices, standalone/control-center, ChangeLog,
-	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
-	standalone/drakboot: new control center and related
-
-	* install_gtk.pm: added firewall support
-
-	* install2.pm: included firewall handling
-	changed firewall comportement
-
-	* install_steps_interactive.pm: changed firewall comportement
-
-	* modules.pm: corrected bad mergeinconf
-
-2000/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
-	cfI/xfI
-	remove isdndb.net
-
-2000/12/19  dam's  <damien@mandrakesoft.com>
-
-	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
-	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
-	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
-	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
-	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
-	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
-	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
-	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
-	standalone/pixmaps/draknet3.xpm: added control-center.
-
-2000/12/19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss
-
-	* unused/christmas-karaoke.patch: Happy Christmas :)
-
-	* install_any.pm: spawnShell: set DISPLAY, just in case :)
-
-	* install2.pm: set PATH before doing spawnShell
-
-	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)
-
-2000/12/18  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm: added embedded support for control-center
-	corrected embedded support.
-	new control center and related
-
-	* netconnect.pm: corrected typo
-	corrected typo
-
-	* standalone/drakxservices, standalone/control-center, ChangeLog,
-	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
-	standalone/drakboot: new control center and related
-
-	* install_gtk.pm: added firewall support
-
-	* install2.pm: included firewall handling
-	changed firewall comportement
-
-	* install_steps_interactive.pm: changed firewall comportement
-
-	* modules.pm: corrected bad mergeinconf
-
-2000/12/18  Pixel  <pixel@mandrakesoft.com>
-
-	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
-	cfI/xfI
-	remove isdndb.net
-
-2000/12/16  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake, standalone/drakgw: use ldetect-lst
-
-	* Makefile.drakxtools: fix daminetsex
-	use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* share/list: use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* any.pm: fix daminetsex
-
-	* modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm,
-	mouse.pm: use ldetect-lst for usb => now auto detects mice types :)
-
-	* c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto
-	detects mice types :)
-	use ldetect-lst
-	pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-	* Makefile.config: fix daminetsex
-	use ldetect-lst
-
-	* Makefile: use ldetect-lst for usb => now auto detects mice types :)
-	use ldetect-lst
-
-	* netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm,
-	Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net,
-	share/Cards2CardsNames: pci_probing now done by libldetect
-	config files moved in package ldetect-lst
-
-2000/12/15  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst
-
-	* install_steps.pm: clean all unneeded stuff
-
-2000/12/14  dam's  <damien@mandrakesoft.com>
-
-	* any_new.pm, netconnect_new.pm: preparing for big jump.
-
-	* netconnect.pm: Big jump. The *_new.pm are replaced by *.pm
-	Everything should work, but you better test :)
-
-	* standalone/control-center: big improvement and cosmetic changes
-	a lot of improvement. Is able to launch multiples soft passing in
-	arguments.
-	new file. Its location should change soon.
-
-	* any.pm: Big jump. The *_new.pm are replaced by *.pm
-	Everything should work, but you better test :)
-	corrected typo.
-
-2000/12/14  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: obsoleted by rpmsrate
-
-	* share/rpmsrate: obsoletes compssList
-
-	* share/compssUsers, install_steps.pm, install_steps_interactive.pm,
-	Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm:
-	move from compssList to rpmsrate
-
-	* Newt/Newt.xs: cleanup (use of alloca to pass parameters)
-
-2000/12/13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/it.po: updated Italian file
-
-2000/12/12  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: typo + if firewall, don't display 'disable network'
-
-	* standalone/draknet2: new version... still working on it
-
-	* ChangeLog: commit
-
-	* share/themes-mdk-Firewall.rc: added firewall theme
-
-	* modules.pm: my fault, corrected renaud's patch incorporation
-
-	* share/logo-mandrake-Firewall.xpm: new logo
-
-2000/12/12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/list: added packdrake.pm as packdrake has been splited.
-
-	* pkgs.pm: fixed versionCompare to always return number. added checking of
-	version to
-	select obsoletes on upgrade.
-
-2000/12/11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: Radeon uses 3D now.
-
-	* lang.pm: fixed write_langs for upgrade.
-	i18n sucking fixes.
-
-	* Xconfigurator.pm: Radeon uses 3D hw accel theoritically now.
-
-2000/12/09  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: Added configuration of Vietnamese input server
-
-2000/12/09  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/adduserdrake: remove debugging code
-
-	* install2.pm (selectInstallClass): give $clicked to selectInstallClass
-
-	* interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to
-	null in case of error
-	on hidden entry cuz newt doesn't display null entries, disturbing
-
-	* install_steps_interactive.pm (formatMountPartitions): the format
-	partition dialog created at first use,
-	so that it doesn't appear if no partitions are formatted.
-	(selectInstallClass): ensure expert choice is kept if it was prechosen
-	(selectInstallClass): if expert pre-chosen, ensure expert is kept
-
-	* interactive_gtk.pm, install_steps.pm: small renicing
-
-2000/12/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed bug in list of packages provided by another one.
-
-2000/12/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po,
-	share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po,
-	share/po/az.po, share/po/tr.po: updated Brazilian file
-
-2000/12/08  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): warn if VERSION file doesn't exist
-	(formatPartitions): call rotate_logs after mounting the partitions
-
-	* mouse.pm (write_conf): fix to make make test_pms happy
-
-	* install_steps.pm (exitInstall): save the report.bug in /root/report.bug
-
-	* any.pm (rotate_logs): created, rotates ddebug.log and install.log in
-	/root
-
-	* ftp.pm (new): retry in case of ftp connection/login
-
-	* commands.pm: report_bug: created, returns a string
-
-2000/12/07  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: corrected ADSL connection choice.
-	corrected typo
-
-2000/12/06  dam's  <damien@mandrakesoft.com>
-
-	* install2.pm: erare humanum es
-	firewall begins to infect the install :).
-	new meta_class.
-
-	* share/logo-mandrake-Firewall.xpm: aded logo for firewall
-
-	* install_gtk.pm: corrected errors
-	left pixmap centered if firewall
-	improved the firewall theme.
-	errare humanum es
-	firewall infects the install.
-	The logo is changed if firewall.
-
-2000/12/06  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: add possibility to use keyboarddrake
-	non-interactive (aka give the keyboard as
-	first parameter)
-
-	* lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm,
-	install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted.
-	Now rpm uses %_install_langs in /etc/rpm/macros
-
-2000/12/05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: final fixes to versionCompare to make sure no deadlock can
-	occurs.
-
-	* Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration.
-
-2000/12/05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po,
-	share/po/es.po: updated several pofiles
-
-2000/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: use isCdNotEjectable.
-
-	* common.pm: added function isCdNotEjectable.
-
-	* share/Cards+: SiS620 card are said to be unsupported by XF4.
-
-	* pkgs.pm: load only one hdlist in memory if CD is not ejectable (low
-	memory).
-	fixed compareVersion for deadlock. removed silly CODE print on deporder
-	problems.
-
-	* Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode.
-
-2000/12/03  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: incorporated cmodifications in the firewall branch
-
-	* netconnect.pm: netconnect_new > netconnect.pm
-
-	* netconnect_consts.pm: incorporated in the firewall branch.
-
-	* standalone/draknet2: incoporated in the firewall branch
-
-	* any_new.pm: any_new > any, so we remove it now.
-
-	* netconnect_new.pm: netconnect_new > netconnect, so we remove it now.
-	incorporated in the firewall branch
-
-	* modules.pm: incorporated modifications to the firewall branch. Hope they
-	won't break anything...
-
-2000/12/02  dam's  <damien@mandrakesoft.com>
-
-	* share/po/az.po: correction in firewall incorporated
-
-	* ChangeLog: first attempt ro build the firewall install
-
-	* standalone/mousedrake: incorporated in the firewall branch
-
-	* share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated
-	in the firewall branch
-
-2000/11/28  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: included reno's patches. Now should work without kudzu.
-	branch to build the firewall install.
-
-	* standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm,
-	standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm,
-	standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm,
-	standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm,
-	standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm,
-	standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm,
-	standalone/pixmaps/isdn.xpm: Initial revision
-	branch to build the firewall install.
-
-	* partition_table_dos.pm, share/po/bg.po, share/po/sr.po,
-	share/template.in/cdrom.kdelnk.in,
-	share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c,
-	Makefile, share/consolefonts/lat0-sun16,
-	share/themes/DarkMarble-check_off.png,
-	share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc,
-	do_resize_fat, share/po/wa.po, share/po/is.po,
-	share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm,
-	class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm,
-	install_interactive.pm, c/README, Xconfig.pm, share/themes.rc,
-	share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc,
-	share/themes-blueHeart.rc, pkgs.pm, keyboard.pm,
-	share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po,
-	standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm,
-	share/step-green-click.xpm, partition_table_sun.pm,
-	share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c,
-	share/po/.cvsignore, share/ftin.xpm, standalone/draksec,
-	resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm,
-	Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm,
-	share/themes/marble3d-button4.png, share/rpm-unselected.xpm,
-	share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png,
-	c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm,
-	standalone/livedrake, share/diskdrake.rc,
-	share/themes/DarkMarble-check_on.png, standalone/draknet,
-	share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png,
-	share/po/ro.po, share/list, share/po/cs.po, share/po/be.po,
-	share/po/sp.po, share/step-orange-click.xpm, modparm.pm,
-	share/step-green.xpm, share/rpm-base.xpm,
-	share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po,
-	share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm,
-	share/Cards2CardsNames, Newt/Makefile.PL,
-	share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po,
-	share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po,
-	standalone/icons/findf.xpm, share/po/lt.po,
-	share/themes/mdk-check_off.png, fs.pm, c/.cvsignore,
-	share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm,
-	detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm,
-	standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm,
-	Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po,
-	share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm,
-	share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po,
-	resize_fat/.cvsignore, install_steps_interactive.pm,
-	share/themes/mdk-button4.png, live_install, standalone/draknet2,
-	any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm,
-	share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm,
-	share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl,
-	swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake,
-	g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po,
-	partition_table_mac.pm, standalone/mousedrake, devices.pm,
-	share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po,
-	share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm,
-	share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po,
-	Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc,
-	share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c,
-	share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm,
-	perl2etags, share/po/Changelog, standalone/drakboot,
-	resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc,
-	share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po,
-	share/MonitorsDB, share/template.in/Dos_.kdelnk.in,
-	standalone/printerdrake, services.pm, share/kmap2bkmap,
-	share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po,
-	common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm,
-	install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16,
-	share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames,
-	c/Makefile.PL, share/themes-mdk-Desktop.rc,
-	share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm,
-	share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw,
-	share/po/sl.po, standalone/rpmdrake, share/makedev.sh,
-	share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc,
-	install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm,
-	my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList,
-	share/po/fr.po, share/themes/DarkMarble-button3_in.png,
-	standalone/icons/ftin.xpm, share/modparm.lst, raid.pm,
-	standalone/diskdrake, share/po/ko.po,
-	share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop,
-	share/po/ja.po, any.pm, share/isdndb.net,
-	share/template.in/floppy.kdelnk.in, share/step-green-on.xpm,
-	share/step-red-click.xpm, share/po/Makefile, help.pm,
-	share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po,
-	share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po,
-	loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm,
-	Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm,
-	standalone/drakxservices, resize_fat/Makefile, fsedit.pm,
-	interactive_stdio.pm, live_install2, resize_fat/directory.pm,
-	share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot,
-	share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po,
-	share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm,
-	share/themes/marble3d-check2.png, ftp.pm, c/md5.h,
-	standalone/adduserdrake, share/themes/marble3d-button2.png,
-	partition_table_raw.pm, share/template.in/zip.kdelnk.in,
-	share/locales.tar.bz2, standalone/icons/fileopen.xpm,
-	share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm,
-	commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po,
-	interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png,
-	interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm,
-	bootloader.pm, share/po/af.po: branch to build the firewall install.
-
-2000/11/28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: change upgrade section for keyboard.
-
-	* install_steps_gtk.pm: extended chooseSizeToInstall.
-
-	* install_steps.pm: updated comment.
-
-	* pkgs.pm: fixed misuse of map with values returing list which are indexed
-	afterward.
-
-	* install_any.pm: removed some more logs.
-
-	* keyboard.pm: keep track of unknown keyboard (for upgrade)
-
-	* install_steps_interactive.pm: modified def_mark to 59 (gl hw
-	acceleration level) and upgrade use this level
-	for newbies so.
-	make sure a recommended upgrade get the minimum and a little more (80).
-	choose default size according to a default mark (currently 49).
-
-2000/11/27  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_consts.pm: added isdn Gazel card 10b5 1151
-
-2000/11/27  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (@bad_types): list of the different type of extended
-	partitions
-	(important_types): remove @bad_types from important_types
-
-2000/11/25  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ru.po: updated Russian file
-
-2000/11/24  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: doc + split
-
-	* netconnect_new.pm: added depmod after having writed modules.conf
-
-	* standalone/mousedrake: splited
-
-2000/11/24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: avoid .la files for selection.
-
-	* install_steps.pm: added missing portmap.
-
-2000/11/23  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: progressbar.
-
-2000/11/23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: updated with
-	structural change of pkgs.
-
-	* install_any.pm: removed some ugly logs.
-	updated with structural change of pkgs.
-
-	* install_steps.pm: added tempory fix for initscripts %post.
-	updated with structural change of pkgs.
-
-	* pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk.
-	removed ugly log on transaction.
-	added special case to avoid counting kernels space when upgrading
-	as these package are not upgraded (just installed).
-	Memory usage optimization, change structure of storing
-	package informations. lot of fork to make sure of
-	freeing memory by perl (no free on used hashes or arrays
-	usable by other than perl), now upgrade takes as much as
-	install which takes at least 0.5Mb less than before.
-
-2000/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: put all tina stuff to weight 0
-
-2000/11/21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files,
-	keep
-	wacom entries.
-
-	* Xconfigurator.pm: upgrade for XF86Config, take care of resolution and
-	depth wanted.
-
-	* install_steps.pm: always try to get default from /etc/X11/XF86Config
-	removing logs.
-
-	* pkgs.pm: cosmetic changes for upgrade, removing some logs.
-
-	* install_steps_interactive.pm: removed code to ask if take care of
-	/etc/X11/XF86Config* files.
-	added wait message during rebuild of rpm database as it takes some time.
-
-	* Xconfigurator_new.pm: WARNING
-
-2000/11/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: updated Azeri file
-
-2000/11/20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: clean up as today filelist is no more.
-	use parsehdlist from rpmtools-2.1-3mdk or above instead of
-	perl code from DrakX forking to simulate a filelist server.
-	this increase performance by 100 to 150% on selection of
-	packages to upgrade.
-
-	* share/list: added parsehdlist.
-
-	* c/stuff.xs.pm: removed logs.
-
-2000/11/20  Pixel  <pixel@mandrakesoft.com>
-
-	* share/Cards+: add radeon
-
-	* install_steps_auto_install.pm (exitInstall): fix message
-
-	* install_steps.pm (afterInstallPackages): moved the
-	writeandclean_ldsoconf here
-
-	* fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points
-
-2000/11/17  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* install_any.pm: add openuniverse to the list of gl apps
-
-2000/11/16  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: corrected isdn_get_{list, info}
-
-2000/11/16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-)
-
-	* modules.pm: tempory version for current glibc, a lot of module have been
-	removed due to
-	problem of stage1 increase in size when compiled with glibc-2.2 and
-	current
-	modutils.
-
-	* c/Makefile.PL: updated with rpmlib 4.
-
-	* c/stuff.xs.pm: completed something that seems to work almost correctly
-	at the first look
-	with rpmlib 4.
-
-2000/11/16  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: add netscape-german, thx to florin
-	isdn4k-utils gets same weight as isdn4net, thx to Florin
-
-2000/11/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po: updated Norwegian file
-
-	* share/po/sk.po: updated Slovak file
-
-2000/11/15  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: added isdn_get_list and isdn_get_info
-	calls modules::write_conf to fill the modules.conf.
-
-	* Xconfigurator_new.pm: added to fork frontends backends. Not operationnal
-	at all for now.
-
-	* modules.pm: when loading a new module, add an alias for it, even in
-	standalone mode.
-
-2000/11/15  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* c/stuff.xs.pm: updated for rpm 4.
-
-	* pkgs.pm: rpmdepOrder again (for new TAGp)
-
-2000/11/15  Pixel  <pixel@mandrakesoft.com>
-
-	* c/Makefile.PL: add librpmio
-
-	* c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc
-	(dev_t)
-
-2000/11/14  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: better structure for the ethx-driver.
-	added call to add_alias and write_conf
-
-	* standalone/draknet2: updated
-
-2000/11/14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: removed foreach (<... which are eating memory
-	fork install on upgrade for searching trhough filelist, this saves
-	about 20Mb of memory before rpmlib transaction are started so its is
-	more than 2 times faster for upgrading a system, sorry it was
-	effectively
-	a machine two overloaded that makes the upgrade slower.
-	make rpmlib not to check size as DrakX should do it.
-	added special cases for selection of packages according to files, avoid
-	all kde-i18n packages if their locales-$lang is not selected, avoid
-	a -devel package if only one files is updated (typical for fixes on
-	package by moving files around).
-	
-	deactivated rpmdepOrder as it should be done directly in
-	depslist.ordered
-	file.
-	
-	fixed obsoletes which never run correctly, even if almost no package are
-	selected explicitely this way.
-	
-	added log during selection of packages to upgrade to keep a track of
-	what DrakX is doing.
-
-	* modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm,
-	Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm,
-	printer.pm, Xconfigurator.pm: removed foreach (<... which are eating
-	memory
-
-2000/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/da.po: updated Danish file
-
-2000/11/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: Integrate Till's patches for better work with Cups.
-
-2000/11/12  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/mousedrake: fix for bug #1350
-	(mousedrake dies with: Undefined subroutine &mouse::serial_ports_names)
-
-	* pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and
-	.cz22 for
-	.cz2) that makes for than one CD install breaks :-(
-
-2000/11/11  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
-	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
-	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
-	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
-	share/po/pl.po, share/po/fi.po, share/po/no.po,
-	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
-	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
-	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-2000/11/10  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet2: draknet2 : new version of draknet, post-install
-	only, uses only libDrakX backend, beautyfull
-
-	* netconnect_new.pm: completed adsl_conf_backend
-	corrected conf_network_card_backend : return interface and module
-	separately
-	splitted pppconfig.
-
-2000/11/10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/po/fr.po: typo fixing
-
-	* printerdrake.pm: fixed wrong case for managing IP for remove CUPS server
-	updated typo for remote CUPS server configuration dialog
-
-2000/11/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files
-
-	* share/po/wa.po, share/po/da.po: updated Danish and Walloon files
-
-2000/11/10  Pixel  <pixel@mandrakesoft.com>
-
-	* c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent
-	section)
-
-2000/11/09  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: added handling for 2 ethernet cards with the same module
-
-2000/11/09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* share/po/fr.po: add some missing translation (mainly printer for CUPS
-	remote config)
-
-	* printer.pm: make sure to restart cups when cupsd.conf is modified.
-
-	* printerdrake.pm: fixed modification of BrowsePoll on a existing file.
-
-2000/11/08  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: updated
-
-2000/11/08  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: make sure class discarding do not destroy result
-
-	* pkgs.pm: added new function for selected or installed accessor on pkg
-	make sure package already installed for oem are marked as selected, as
-	some
-	code refer to this state to perform some actions (install_urpmi)
-
-	* install_steps.pm: fixed for urpmi again;
-
-	* printerdrake.pm: add management of BrowsePoll <ip>:<port> in
-	/etc/cups/cupsd.conf
-
-	* printer.pm: add minimal management of /etc/cups/cupsd.conf
-
-2000/11/08  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136)
-
-2000/11/08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/es.po: updated Spanish file
-
-2000/11/07  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: now there are 8 ttyS* available for configuration. Used for
-	internal modem configuration that uses ttyS* > 3
-
-	* netconnect_new.pm: ttyS0 -> ttyS7 available for configuration
-	some doc
-
-2000/11/07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128).
-
-	* install_steps_interactive.pm: use of install_any::boot_medium to avoid
-	listing medium used for boot
-
-	* install_any.pm: use of $boot_medium where the boot medium is used
-	(default 1)
-
-2000/11/07  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to
-	<sileryti@mail.com>
-
-2000/11/07  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): in oem, configureX automatic
-	(main): $::oem is now global :-(  (needed in install_steps.pm)
-
-	* install_steps.pm (afterInstallPackages): give medium 'cdrom' to
-	install_urpmi in case of $::oem
-
-2000/11/06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: backend/frontend fork complete
-
-	* any_new.pm: load_thiskind changed to load_thiskind_backend, the wait
-	function is passed by argument
-
-	* network.pm: configureNetwork2 commented.
-
-2000/11/06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: created function for examining already installed package on
-	install (oem).
-
-	* install2.pm: add a flag to allow by default formating /
-
-	* install_steps.pm: conditionnal format of / and use already installed
-	packages if any on install.
-
-2000/11/06  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius
-	<ajulius@yahoo.com>
-
-2000/11/06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file
-	GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to
-	ascii transliteration for them
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
-	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
-	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
-	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
-	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
-	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
-	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
-	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
-	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
-	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
-	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
-	share/po/af.po: updated pot file
-
-	* keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds
-
-2000/11/06  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (formatPartitions): formatMountPartitions done even in
-	upgrade
-	(main): set $o->{partitioning}{use_existing_root} in oem
-
-	* install_steps.pm (doPartitionDisksAfter): remove the mount_all which is
-	plain dumb
-	(doPartitionDisksAfter): fs::mount_all moved here
-	(doPartitionDisks): use $o->{partitioning}{use_existing_root}
-
-	* install_any.pm (use_root_part): fs::mount_all really removed
-	(use_root_part): fs::mount_all removed
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): don't propose
-	already mounted partitions
-	(installCrypto): nicer layout
-
-2000/11/05  dam's  <damien@mandrakesoft.com>
-
-	* mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse'
-
-2000/11/05  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette
-	<yves@maniette.com>
-
-2000/11/01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/eo.po: updated Esperanto file
-
-2000/10/31  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: continuing forking frontend - backend. adsl ist
-	nearly finished
-
-	* any_new.pm: added this file to fork frontends and backends in any.pm
-
-2000/10/30  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux
-	tu damsera
-
-2000/10/30  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/wa.po: updated Walloon file
-
-	* share/keyboards.tar.bz2: updated keyboards
-
-2000/10/30  Pixel  <pixel@mandrakesoft.com>
-
-	* lang.pm (load_po): backslash @ in po strings, otherwise the eval fails
-
-2000/10/28  dam's  <damien@mandrakesoft.com>
-
-	* netconnect_new.pm: new version of draknet. Splited frontends - backends
-
-2000/10/28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/tr.po: updated Turkish file
-
-2000/10/27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: remove the noising rpm output command line when loging
-	installed rpm
-	size (only usefull for live_update and just for conveniance).
-
-	* pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP
-	hack)
-	before reading a compssUsers file.
-
-	* live_install: add VERSION in list of file that have to be symlinked.
-
-	* common.pm: list_skels returns list of existing directory and writeable.
-
-	* live_install2: Make sure to remove font path in /tmp/drakx before
-	exiting.
-
-2000/10/26  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and
-	Turkish files
-
-2000/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: fortune-mod gets 10/0/10 on request from egil
-
-2000/10/24  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/pl.po: updated Polish file
-
-2000/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/ca.po: updated Catalan file
-
-2000/10/23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns
-	to please jl :)
-
-	* detect_devices.pm (floppies, probeall): add require "modules" as it
-	should be
-
-	* install_interactive.pm (partitionWizardSolutions): add "require
-	resize_fat::main" as it should be
-
-2000/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has
-	74/0/74
-
-2000/10/21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish
-	and Ukrainian files
-
-2000/10/20  fabman
-
-	* share/po/es.po: updated
-
-2000/10/20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: ntp to -1/-1/-1
-
-2000/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: put all packages requiring kde1-compat to 0 except
-	kisdn-free
-	aumix now gets a high weight (79) because it's required to save the
-	mixer
-	settings at shutdown
-
-2000/10/19  Pixel  <pixel@mandrakesoft.com>
-
-	* share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212)
-
-2000/10/19  tlb
-
-	* share/po/da.po: 100%, Troels Liebe Bentsen.
-
-2000/10/18  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/az.po: Added AZeri file
-
-	* share/po/no.po: updated Norwegian file
-
-2000/10/17  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused
-	code in ineractive_gtk
-	added some isdn card in pcitable
-	corrected typos, and made ISA isdn work
-
-2000/10/17  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/lv.po: updated Latvian file
-
-2000/10/16  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
-	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
-	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
-	share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
-	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
-	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
-	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
-	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
-	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
-	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
-	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
-	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file
-
-	* standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace
-	setting
-
-2000/10/16  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (cdroms): fix the setting of scdX for ide burners
-
-	* share/compssList: sympa is -1 except for server
-
-	* keyboard.pm (write): small pixelization (neater now)
-
-	* install_steps.pm (installPackages): don't run ldconfig in g_auto_install
-
-2000/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/nl.po: updated Dutch file
-
-2000/10/14  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm, keyboard.pm: small fix for Swedish locale
-
-	* share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po,
-	share/po/wa.po, share/po/de.po: updated Bulgarian file
-
-2000/10/13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* partition_table_empty.pm: empty partition table as assumed only if the
-	MBR is really composed of only null chars.
-
-2000/10/13  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: added viavoicemenu
-
-2000/10/12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (ask_mntpoint_s): dqs
-
-2000/10/11  Pixel  <pixel@mandrakesoft.com>
-
-	* .cvsignore: ignore flog files
-
-	* install2.pm (main): test
-
-	* ChangeLog: qsdqsd
-
-	* install_steps_interactive.pm: * (selectKeyboard): set default
-	$o->{langs} to $o->{lang}
-
-2000/10/10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw, ChangeLog: make only one call to urpmi in order to
-	install all the needed rpm's
-
-2000/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/po/no.po, share/po/es.po: updated Norwegian file
-
-	* share/po/pl.po: updated Polish file
-
-	* share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file
-
-2000/10/10  tlb
-
-	* share/po/da.po: 99%.
-
-2000-10-10  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: make only one call to urpmi in order
-	to install all the needed rpm's
-
-2000-10-10  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-10  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm: increase $::VERSION
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: update after Dam's new messages in netconnect
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): remove the handling of
-	doc desktop icons. see dadou
-
-2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers: new list (with icons)
-
-	* share/list: add icons for compssUsers
-
-2000-10-09  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: added wait message
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* share/themes-*.rc: change the fg[INSENSITIVE] entry
-
-2000-10-09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: added tuxracer in OpenGL games to install if an
-	accelerated card has been found.
-
-2000-10-09  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): asking connection after writing start/stop scripts.
-	(adsl_conf): if during install, don't use chkconfig, make the
-	links directly for the adsl init script.
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): UserView in kdmrc is
-	now true by default. So put false if security >= 3 instead of
-	removing it.
-
-2000-10-09  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: default speed of modem set to 115200.
-
-	* fs.pm: fixed format of RAID partition.
-
-	* install_interactive.pm: take into account RAID partitions for
-	searching / partition.
-
-2000-10-09  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (selectKeyboard): don't assume $o->{langs} is set
-	(selectLanguage): don't set $o->{langs} (so that you can go back
-	and it works)
-
-	* common.pm (round_up, round_down): ensure number is an integer
-
-	* install_steps_interactive.pm (chooseGroups): take into account
-	the min_level to compute the size
-
-2000-10-08  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): move the
-	computing of max_size before calling chooseGroups (not the one for
-	desktop meta_class)
-	(chooseGroups): compute the size of Miscellaneous
-
-2000-10-07  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-07  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: don't install locales-* even in 'all' install
-	(those files are usefull if RPM_INSTALL_LANG doesn't include that
-	lang)	
-
-2000-10-07  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-07  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (install): log the gonna be installed packages (-> be
-	able to track not installed packages that should have been
-	installed)	
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf
-	(intro): connection detection improved : now use "ifconfig | grep interface"
-	(pppConfig): corrected cnx_up/down
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): don't fail if
-	kdeglobals file is not there	
-
-	* share/compssUsers.desktop: fix icons
-
-	* detect_devices.pm (cdroms): fix for scsi cdrom drives
-
-	* pci_probing/pcitable: put cs46xx instead of snd-card-cs461x
-	(dixit jeff)
-
-	* diskdrake.pm (Resize): comment ext2&reiserfs resizing for the
-	moment	
-
-2000-10-06  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* Xconfigurator.pm (write_XF86Config): added mode of wacom devices
-
-2000-10-06  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (ask_connect_now): connection is now tested.
-
-2000-10-06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps_gtk.pm: updated
-	license.
-
-	* Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by
-	DRI, use only Mesa with Utah GLX, fixed autologin for avoiding
-	drakres and no wm available, moved Riva128 card from experimental
-	to stable, fixed presentations of text.
-
-	* pci_probing/pcitable: fixed Cirrus Logic sound card.
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: fixed bad call to hasUsb...
-
-	* share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep
-	530, 620 and 6326 with XFree 4.0.1.
-
-2000-10-06  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-06  Pixel  <pixel@mandrakesoft.com>
-
-	* share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore	
-
-	* install_steps.pm (afterInstallPackages): put the Charset in
-	kdeglobals, otherwise kde uses charset iso8859-1 :(
-
-	* lang.pm (charset): created
-
-	* common.pm (update_userkderc): fix it, change the argument
-	passing	
-
-2000-10-05  Pixel  <pixel@mandrakesoft.com>
-
-	* share/compssList: raise kde-i18n-*, should be installed whenever
-	kdebase is installed
-
-	* pci_probing/pcitable: integrate patch from viet (concerns
-	sym53c8xx cards)
-
-	* share/compssUsers: use "documentation" as the database icon
-
-	* install_steps_interactive.pm (chooseGroups): fix to accept icons
-	not in the format "*_section.xpm"
-
-	* install2.pm (miscellaneous): put yes/no in sysconfig/usb entries	
-
-2000-10-05  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (adsl_conf): updated pppoe conf.
-	(main): added $netc->{minus_one} to avoid to count dhcp configured
-	eth when asking to share the connection.
-	(adsl-pppoe): improvement. Should work now.
-	(miscellaneous): corrected chmod 755 to 744 for connections scripts
-
-	* netconnect.pm (main): network is stopped then started, instead
-	of restarted.
-
-2000-10-05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* live_install: added icons (this fixes the yellow on white
-	tooltips problem).
-
-	* install_any.pm: added ghostscript-utils in the list of packages
-	to copy when changing CD.
-
-	* printerdrake.pm: install ghostscript-utils if a lexmark printer
-	is selected on cups.
-
-2000-10-05  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-05  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (loadO): look for auto_inst.cfg in /, not in
-	/Mandrake/base	
-
-2000-10-05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* netconnect.pm: fixed syntax error.
-
-	* share/po/i18n_compssUsers: simplified version and fixed
-	dependancies to pkgs.pm (for building drakxtools).
-
-2000-10-04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: removed 80 pixel on height for live upgrade.
-
-	* install_steps.pm: do not set keyboard when live upgrade after
-	setting the language.
-
-	* install_steps_gtk.pm: fixed the trying to start a X server on
-	live.
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/i18n_compssUsers: fake module ``c'' so that no need to
-	build DrakX to use i18n_compssUsers
-
-	* install_steps_interactive.pm (selectLanguage): update license
-
-	* install_steps_gtk.pm (installPackages): add second license for
-	shitty soft (commercial one)
-
-2000-10-04  dam's  <damien@mandrakesoft.com>
-
-	* draknet (netconnect.pm and network.pm): various translations
-	corrected, network is restarted, buttons connect/disconnect
-	debugged. 
-
-2000-10-04  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (main): kill prefdm instead of autologin
-
-	* install_any.pm (find_root_parts): don't use
-	suggest_mount_points, it couldn't do what we wanted	
-	(guess_mount_point): created, contains the common stuff between
-	suggest_mount_points and find_root_parts
-
-2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: fix some failing/untranslated i18n messages
-
-	* share/po/fr.po: write translations according to drakgw
-	
-2000-10-04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: removed bad card for 3D Rage Pro.
-
-	* install_any.pm: removed Aurora for SiS card, add more case for
-	detecting right cdrom for live upgrade, fixed wrong list of
-	packages for laptops.
-
-	* c/stuff.xs.pm: added time interval of 200ms between update of
-	progression bar of install, make sure the last step is seen.
-
-2000-10-04  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (when_load): stricter regexp for $type is scsi or not
-	(so that scsi_mod with is scsi_raw doesn't get an alias
-	scsi_hostadapter)	
-
-	* detect_devices.pm (isLS120Drive): extend the regexp to include
-	"Caleb Technology - 144MB FDD UHD Floppy"
-
-	* detect_devices.pm (burners, IDEburners): reworked, renamed, now
-	works!	
-	* c/stuff.xs.pm (isBurner): created
-
-	* modules.pm (load_ide): make sure ide-cd is loaded!
-
-	* install_steps_interactive.pm (chooseGroups): the label and help
-	are now translated (at least will be), so use the translations
-
-2000-10-03  Pixel  <pixel@mandrakesoft.com>
-
-	* share/po/Makefile (DrakX.pot): added the to-be-translated from
-	compssUsers
-	* share/po/i18n_compssUsers: read the compssUsers's and output the
-	to-be-translated in po format
-
-	* log.pm (l): log to STDERR instead of STDOUT
-
-	* install_any.pm (loadO): use first floppy drive available (won't
-	help much though, as stage1 doesn't follow this...)
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-03  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): don't propose autologin in
-	security > 3
-
-	* common.pm (availableRamMB): HACK HACK if i810 and memsize,
-	returns 127
-
-	* bootloader.pm (suggest): don't use grub if more than 800MB
-
-2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/validate.pl: create this tool
-	
-	* share/po/fr.po: fix many typos
-
-	* share/po/fr.po: make compssUsers translation
-
-2000-10-03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator_consts.pm: changed resolution allocation.
-
-	* fs.pm: removed no more used log.
-
-	* install2.pm: add exit button if live upgrade.
-
-	* install_any.pm: increased minimal available size to 65Mb.
-
-	* install_steps.pm, standalone/printerdrake: fixed cups to CUPS
-	for mode.
-
-	* printerdrake.pm: fixed not_edit for lpr mode of printerdrake.
-
-	* share/Cards+: fixed Savage2000 entry.
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: updated bad card with Rage Mobility card.
-
-	* live_install: added test of root user, abort if not root.
-
-2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/po/fr.po: fixed bug #518 and fixed other misc errors
-
-2000-10-03  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-10-02  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm (Resize): fix to make ext2resizing work a little
-	better	
-
-	* install_steps.pm: fixed installation of urpmi configuration.
-
-	* detect_devices.pm: updated comment about UltraDMA66/100
-	management.
-
-	* modules.pm: updated comment about UltraDMA66/100 management.
-
-	* diskdrake.pm: adding a cylinder for the minimum of the resize
-	and if there is nothing to do for resize, simply return.
-
-	* install_any.pm: added missing require pkgs.
-
-2000-10-02  Pixel  <pixel@mandrakesoft.com>
-
-	* many files: remove many lnx4win special cases which are not
-	needed anymore        
-	
-	* any.pm (addUsers): grpuser output goes to Mr Dave
-
-	* bootloader.pm (install_lilo): change the default color of menu
-
-	* install_steps_interactive.pm (choosePackages): add 300MB choice
-	in desktop
-
-	* mouse.pm (fullnames): fix i18n fix
-
-	* install_steps.pm (miscellaneous): don't add ide2=0x... for
-	ultra66 (otherwise chmouel is not happy, so is hdc being hde)
-	
-	* Xconfigurator.pm (main): add handling of icewm logout
-
-	* c/stuff.xs.pm: changed the stepping of "Progressing installing package"
-
-2000-10-02  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): infos are written only when needed.
-	* netconnect.pm (intro): connection checking now works.
-	
-2000-10-02  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like
-	jeff request.
-
-2000-09-30  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-30  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm: a LOT of bugs fixed. draknet is now completely
-	brok^H^H^H^Hfrozen.
-
-2000-09-29  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-29  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (adsl_conf): dhcp should better work.
-
-	* network.pm (configureNetwork): remove connection script if a
-	gateway is given.
-
-	* common.pm (setVarsInShMode): created. chmod the file with
-	permissions passed in argument.
-
-2000-09-29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* modules.pm (load): fixed when standalone, use modprobe.
-
-	* pkgs.pm: added preference for wu-ftpd.
-
-	* detect_devices.pm: added code to proble USB printer.
-
-	* printer.pm: fixed missing PRINTER=yes on CUPS configuration for
-	USB printer.
-
-	* install_steps.pm: removed possibilty to add an user in urpmi
-	group (jloup).
-
-	* install_steps_interactive.pm: log if CD not ejectable.
-
-2000-09-29  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: sync with latest packages
-
-	* install_steps_interactive.pm (selectLanguage($)): s/42/43/ in
-	  MandrakeSoft physical address 
-
-2000-09-29  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-29  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (intro): detection of internet
-	configuration/connexion state.
-	
-	* network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_thiskind): add read_already_loaded cuz of
-	pcmcia	
-
-2000-09-28  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: add nasty DrakSync and DrakProfile with 50 0 50
-
-2000-09-28  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): the minimum is 25
-	in beginner, not 10
-
-	* pkgs.pm (readCompssUsers): fix reading description
-
-	* install_steps.pm (afterInstallPackages): remove the code to
-	handle RPM-GPG-KEYS
-
-2000-09-28  dam's  <damien@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_list_with_helpW): no more theme
-	parsing, no more draknet.rc
-
-	* netconnect.pm (read_net_conf): no adsl tree anymore.
-
-	* netconnect.pm: drakgw called if enough card are installed.
-
-	* netconnect.pm: minor bugs correction.
-
-2000-09-28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Makefile.config: added livedrake for drakxtools.
-	* diskdrake.pm: use corrected partition size when resizing a dos
-	partition (like the others).
-	* install_any.pm: no more pnm2ppa packages and others in package
-	to copy when changing CD.
-	* live_install: exec live_install2 instead.
-	* live_install2: contains post live upgrade stuff now.
-	* printerdrake.pm: protect set_help() usage by if $::isInstall,
-	removed reference to package pnm2ppa and others.
-	* standalone/livedrake: initial release for drakxtools.
-
-2000-09-28  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_interactive.pm (partitionWizardSolutions): fix the limit
-	cases for lnx4win	
-
-	* share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation	
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): set $size2install
-	to $availableC in desktop install, as it should be
-
-	* install2.pm (choosePackages): remove the code for removing kdesu
-	in high security...
-
-	* install_steps_interactive.pm (createBootdisk): format more
-	nicely the text
-
-	* install_steps_gtk.pm (installPackages): add 10 seconds to have a
-	better estimation
-
-	* install_steps_interactive.pm (chooseGroups): now returns a boolean
-	(choosePackages): use chooseGroups return value to redo
-	choosePackages	
-
-	* install_steps_gtk.pm (selectMouse): if mouse type is none, then
-	don't test!
-
-	* Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom
-
-	* various: replace all Rescue by Update
-
-	* pkgs.pm (readCompssUsers): read description for groups
-	
-	* install_steps_interactive.pm (chooseGroups): add description for
-	groups	
-
-2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssUsers.desktop: added description
-
-	* share/compssUsers: added description
-
-	* share/compssUsers.desktop: added icon support, reordered,
-	  renamed
-
-	* share/compssUsers: reordered, renamed
-
-2000-09-27  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectLanguage): intregrate
-	license again
-
-	* pkgs.pm (readCompssUsers): reads compssUsers.meta_class
-
-	* diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/''
-	(as should be)
-
-	* install_steps_gtk.pm (selectInstallClass1): if @$l (list of
-	install classes) contains only one element, call
-	install_steps_interactive::selectInstallClass1	
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): fix for
-	"no partitions selected to format"
-
-	* my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie	
-
-2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* share/compssList: more for gnupg, -11 for sucking things,
-          changed compss-groups to be less than 70.
-
-	* share/compssUsers: modified compssUsers with Warly, added
-          compssUsers.desktop, simplified for KD (now uses Graphical
-	  Desktop/KDE instead of listing all relevant packages)
-
-2000-09-27  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (get_info_adsl_providers, read_adsl_providers):
-	Created. adsl provider tree. 
-	(set_net_conf): better informations storing.
-
-	* my_gtk.pm (new): windows are always centered if standalone.
-
-2000-09-27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed
-	3D hw acceleration for i815 (VideoRam). prefer XF3 for all
-	NeoMagic cards.
-	* install_gtk.pm: re-enabled themes on live upgrade but without
-	modifying background image.
-	* install_steps_gtk.pm: fixed missing help.
-	* live_install: lot of fixes to enable DrakX font, keep upgraded
-	system clean (libperl.so which allows graphical login).
-	* pkgs.pm: added function allowedToUpgrade to filter kernel
-	package.
-
-2000-09-27  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (configureX): if `clicked' don't go
-	to auto mode
-
-	* Xconfigurator.pm (monitorConfiguration): fix the translated
-	'Generic' which is not so (and must not be so) anymore
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm: remove all Unskip code
-
-	* my_gtk.pm (_create_window): add shortcut alt-e to switch to
-	expert
-
-	* Xconfigurator.pm (resolutionsConfiguration): fix for setting
-	legal resolution
-
-	* install_steps_interactive.pm (selectLanguage): use formatAlaTeX
-	on the license
-
-2000-09-26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* fs.pm: added mounting of swap partition when mounting them
-	all (this can help :-) 
-	* pkgs.pm: fixed correction size code to make (really) a true
-	bijection between corrected and rpm size.
-
-2000-09-26  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectLanguage): integrate the
-	license (temporary one)
-
-	* modules.pm (write_conf): fix the /etc/modules generation
-
-	* interactive_gtk.pm (ask_many_from_listW): if more than 5 entries
-	in icon format, use scrollbar. In non-icon format, use scrollbar
-	for more than 11 entries.
-
-	* commands.pm (bug): add ddcxinfos
-
-	* pci_probing/pcitable: replace tulip by de4x5 for 2104x cards	
-
-2000-09-26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added more 3D Rage Pro card for 3D
-	acceleration with Utah-GLX (Rage Mobility, Rage XC/XL),
-	modified identification for checking acceleration.
-	* install_any.pm: added automatic installation (up 60) for
-	OpenGL games if a graphic card MAY BE accelerated.
-	* live_install: fixed perl idioms in pure shell script and added
-	packdrake symlink if not already installed.
-	* share/compssList: changed level to -1 for all needing 3D hw
-	acceleration packages.
-
-2000-09-26  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (write_resolv_conf): write temp dns line to be used
-	with new initscripts package. Use to set dns live.
-
-2000-09-26  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-26  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (read): catch exception if fullname2mouse fails (eg:
-	old FULLNAME format)
-
-2000-09-25  Pixel  <pixel@mandrakesoft.com>
-
-	* share/MonitorsDB: merge with latest redhat MonitorsDB
-
-	* pci_probing/pcitable: major merge with latest redhat pcitable
-
-	* share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to
-	"Rage 128", added "Rage 128 Mobility"
-
-	* install_any.pm (getAvailableSpace): keep 10% of free space on
-	big partitions
-
-	* Xconfigurator.pm (readMonitorsDB): don't translate Generic
-	(otherwise, only a part is translated, see MonitorsDB for the
-	non-translated part)
-
-	* interactive.pm (ask_many_from_list): fix sorting
-
-	* install_gtk.pm (test_mouse): smaller box to fit in 640x480
-
-	* install_steps.pm (afterInstallPackages, beforeInstallPackages):
-	RPM-GPG-KEYS is copied before installing packages
-
-	* pkgs.pm (readCompssUsers): handle icons in compssUsers
-
-	* common.pm (truncate_list): ensure the list is not too big
-
-	* install_steps_gtk.pm (choosePackagesTree): restrict the list to
-	20 elements if it is too big (use truncate_list)
-
-2000-09-25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: add Video mode for entry.
-	* fs.pm: updated for live upgrade.
-	* install2.pm: dropped unuseful steps filtering.
-	* install_any.pm: fixed wrong Device3Dfx package name and clean
-	postinstall rpms directory on upgrade before filling it.
-	* install_gtk.pm: removed window restrictions of live upgrade.
-	* install_steps.pm: fixed initrd symlink following in case of
-	upgrade.
-	* install_steps_gtk.pm, install_steps_interactive.pm: keep always
-	upgrade on live upgrade.
-	* modules.pm: may fixed pcmcia lost driver (typically on network).
-	* pkgs.pm: fixed (uggly?) usage of floating perl data on perl
-	script :-)
-	* printer.pm: back to "Generic PostScript" for default printer (jloup).
-	* printerdrake.pm: make sure an expert can choose among available
-	devices.
-
-2000-09-25  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (write_resolv_conf): write '# ppp temp entry adsl' in
-	/etc/resolv.conf if needed.
-
-	* netconnect.pm : adsl connection does'nt need any dns anymore.
-
-	* netconnect.pm (read_net_conf): created. draknet now stores and
-	reload the config.
-	
-	* netconnect.pm (main): if the user is french and uses french
-	keyboard, don't ask his country.
-
-2000-09-25  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: added 8139too
-
-	* share/Cards+: GeForce2 DDR is handled by driver "nv"
-
-	* Xconfigurator.pm (main): in killall X for Xdrakres, also killall
-	kdm/xdm/gdm/autologin :)
-
-2000-09-25  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-25  dam's  <damien@mandrakesoft.com>
-
-	* network.pm (configureNetwork): Warn user if he already
-	configured the interface.
-
-2000-09-24  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (mergein_conf): created. call read_conf, fills
-	%modules::conf and set $modules::scsi
-
-2000-09-24  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit
-
-2000-09-24  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-24  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (bug): use first floppy drive instead of fd0 hard
-	coded (nice for LS120's)
-
-	* install_steps_gtk.pm (selectMouse): if device changed, do the
-	test	
-	* standalone/mousedrake: fix for serial mice
-	* install_steps_interactive.pm (selectMouse): fix for serial mice
-
-2000-09-23  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (conf_network_card): now displays the modules of
-	detected ethernet cards.
-
-2000-09-22  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (main): calls drakegw.
-	* netconnect.pm (get_net_device): fixed
-
-2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw:
-	  - added logs
-	  - added verbose mode
-          - fixed wrong stopping of named in other languages than english
-
-	* netconnect.pm (get_net_device): try to fix it..
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard,
-	choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list
-	(): 
-
-	* interactive.pm (ask_many_from_list): now only ask_many_from_list
-	exists, obsoleting ask_many_from_list_ref and
-	ask_many_from_list_with_help. More flexible and nicer
-	* interactive_newt.pm (ask_many_from_listW): adapted to new
-	calling type
-	* interactive_gtk.pm (ask_many_from_listW): adapted to new calling
-	type, handle 'shadow' and 'icon2f'
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win}
-
-	* Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for
-	i810	
-	(testFinalConfig): i810 is a verybad_card, aka can't test anything
-	on it :-(
-	(main): fork to background and stay there while waiting for the WM
-	to exit
-	(testFinalConfig): update the backgroung image path
-
-	* interactive_gtk.pm (exit): flush X before leaving (otherwise the
-	mousecursor is not restored)
-
-	* run_program.pm (rooted): don't redirect the stdout and stderr to
-	ddebug.log if not $::isInstall
-
-	* log.pm (l): log on stdout/stderr if !isInstall and !isStandalone
-
-	* modules.pm (load_raw): redirect stderr to tty5
-
-	* install2.pm (main): set variable $::isInstall
-
-2000-09-22  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/drakgw: now includes information from netconnect to
-	ignore the interface used for Internet connection
-
-2000-09-22  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectInstallClass1): pixel's typo.
-
-	* netconnect.pm (get_net_device): added get_net_device to know
-	which interface has been used to configure the internet connection.
-	(conf_network_card): ask to restart network if dhcp too.
-	(main): enable dialing when modem.
-
-	* network.pm (configureNetworkIntf): changed label to warn people
-	about already configured eth cards.
-
-2000-09-22  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_gtk.pm: added Desktop themes.
-	* share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png:
-	initial release.
-	* install2.pm: moved back to all steps for live upgrade.
-	* install_gtk.pm: select right logo if desktop.
-	* install_steps_interactive, install_steps_gtk.pm: avoid asking if
-	upgrade for a live upgrade.
-
-2000-09-22  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm: add some call to log_sizes to log the
-	installed size
-
-	* install_steps_gtk.pm (installPackages): beep before changeMedium		
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf): try to call the f translation
-	function on the default value with the index
-
-	* install_steps.pm (afterInstallPackages): make the gpg code work,
-	changed the call to 
-	"gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS"
-
-	* detect_devices.pm: cleanup and removed unused code
-
-2000-09-21  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* detect_devices.pm (getNet()): really remove plip in standalone
-
-2000-09-21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm, netconnect.pm: changed NETWORKING reference
-	from false to no.
-	* printer.pm: changed timeout from 30 to 60.
-	* printerdrake.pm: added wait message when waiting for cups to
-	start.
-	* pci_probing/pcitable: added erwan VIA Rhine board.
-	* network.pm: added DHCP_HOSTNAME reference.
-
-2000-09-21  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/keyboarddrake: fix for XF4
-
-	* Xconfigurator.pm (write_XF86Config): comment the omit
-	xfree86-dga	
-
-	* install_steps.pm (afterInstallPackages): configure GPG public
-	keyring with mandrake key	
-
-	* standalone/mousedrake: updated/fixed for new mouse handling	
-
-	* install2.pm (main): update for handling oem installs
-
-	* many files: relGetFile cleanup, updated calls to getFile and
-	getAndSaveFile accordingly
-
-	* Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg
-
-	* detect_devices.pm (@netdevices): plip removed in standalone,
-	otherwise plip is always there (because of kmod)
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): replace
-	the die "cancel" by die "already displayed", so that no error is
-	displayed.
-
-	* pci_probing/pcitable: replace some rtl8139 by 8139too, added
-	cards DELTA8139 and ADDTRON8139 (for jeff)
-
-	* Xconfigurator.pm (show_info): also show the colordepth and
-	resolution. don't show server if none, show XF4 driver if there's
-	one.	
-	(main): change the "Forget the changes" to "Keep the changes?"
-	with displaying the current configuration.
-
-2000-09-21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printer.pm: changed "PostScript" ppd default description to "Raw
-	queue (no filtering)", asked by Till.
-	* Xconfigurator.pm: add log of what user select for 3D hw
-	acceleration.
-	* share/compssList: changed XFree86-glide-module to -2 because the
-	level is the same for XFree86-Glide* which may have multiple
-	different version installed due to dependancies of the first one.
-
-2000-09-21  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (conf_network_card): added check when dhcp. Cable connection
-	should now work.
-
-2000-09-21  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (exitInstall): call $o->exit if
-	"Some steps are not completed"
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* bootloader.pm (install_loadlin_config_sys,
-	install_loadlin_desktop): extracted from install_loadlin, do not
-	call them anymore (remove it?)
-	(suggest): put grub in lnx4win install
-
-	* common.pm (availableRamMB): fixed (round to a multiple of 4)	
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (get_info_isdn_providers & read_isdn_providers):
-	read file in /usr/share and $prefix/usr/share 
-	(isdn_write_config): corrected file to be sh compliant.
-	(isdn_write_config): added default route settings for isdn.
-
-2000-09-20  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* pci_probing/pcitable: replace es1371 by snd-card-ens1371
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 
-
-2000-09-20  Guillaume Cottenceau  <gc@mandrakesoft.com>
-
-	* standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume 
-
-	* standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* standalone/draknet: used new package install function.
-
-2000-09-20  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (isFloppyOrHD): detects wether a device is a
-	floppy or not based on its size (for scsi floppy)
-
-	* Xconfigurator.pm (testFinalConfig): check if "server" OR
-	"driver" field is set (otherwise XF4 only card won't pass)
-
-	* bootloader.pm (suggest): fix for ``installing the last cooker
-	from kenobi:/I on an smp machine i don't get anymore an entry for
-	linux-up'' (c chmouel)
-
-2000-09-20  dam's  <damien@mandrakesoft.com>
-
-	* netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])
-
-2000-09-20  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (get_pcmcia_devices): fix (especially, now ethernet
-	should be detected)
-
-	* lang.pm (get_langs): created, gives rpm install langs
-	* install_any.pm (setPackages): give langs::get_langs() to
-	readCompssList	
-	* pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
-	$langs instead. This fixes the RPM_INSTALL_LANG=all install.
-
-2000-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* netconnect.pm: make dhcp-client, pump and such not translatable.
-	Those are program names and should therefore not be translated,
-	that only confuses translators
-
-2000-09-19  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm (autologin): corrected @users definition and
-	passwd cat.
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* many files: changed some access to get_root to get_root_	
-	
-	* install_steps_interactive.pm (choosePackages): added code for
-	desktop meta_class install type
-
-	* install_steps_gtk.pm (selectMouse): cleanup, give parameter
-	emulate3buttons to setMouseLive
-	* c/stuff.xs.pm (setMouseLive): add argument emulate3buttons
-
-2000-09-19  Guillaume Cottenceau <gc@mandrakesoft.com>
-
-	* interactive*.pm: changed `suspend' and `resume' to behave as expected,
-	added `enter_console' and `leave_console'
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
-	META_CLASS
-
-	* Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
-	result (not enough VideoRam), also remove the found resolutions
-	* Xconfigurator.pm (main): remove the automatic searching of
-	resolutions	
-	* Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
-	automatic searching of resolutions.
-
-	* mouse.pm (fullnames): changed the `_' in `[' before Other
-	(nicer, uh?)
-
-	* install2.pm (selectMouse): changed clicked to !first_time
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-19  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (testFinalConfig): remove the bloody prototype
-
-2000-09-19  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-18  Dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator (autologin): do it eve, if newbie. Autologin is
-	now in separated function.
-	
-2000-09-18  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (testFinalConfig): don't skip the test in auto
-	if called via "Test again"
-	* Xconfigurator.pm (resolutionsConfiguration): ensure all depth
-	are bounded
-
-	* bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
-	classic and no-fb
-
-	* fsedit.pm (check_mntpoint): add a check for /etc /lib... which
-	must not be mount points. Also check that /home, /tmp and /usr are
-	on trueFS
-
-	* interactive.pm (ask_from_entries_ref): add bounding of "val" in
-	case of type "range". die if min > max.
-
-2000-09-18  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): nicer
-	partition/device display
-
-	* partition_table_raw.pm (zero_MBR): add on the fly require of the
-	good partition_table_$type
-
-	* detect_devices.pm (cdroms): fix (yet again) the scd$nb device
-	assignment to ide burners
-
-	* install_steps.pm (afterInstallPackages): comment out a part of
-	the icons mess messing
-
-	* Xconfigurator.pm (cardConfiguration): move Unlisted to
-	Other/Unlisted
-	* share/CardsNames: updated (for Voodoo5)
-
-	* install_steps_gtk.pm (selectMouse): fix the test to know wether
-	the guy has changed the mouse type (to know wether to test the
-	mouse or not)
-
-	* install_steps_interactive.pm (selectLanguage): add the license
-	
-	* install_steps_interactive.pm (choosePackages): have the
-	"Recommended" size be the default 
-	(in the choice Minimum/Recommanded/Complete)
-	
-	* diskdrake.pm (Type): fix a typo
-
-	* install_steps.pm (doPartitionDisksAfter): mark partition as
-	mounted	
-
-2000-09-17  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-17  Pixel  <pixel@mandrakesoft.com>
-
-	* install/pcmcia_config.patch: cleaned
-	
-	* diskdrake.pm (Create, Type): have type field not_editable
-
-	* tools/make_mdkinst_stage2: use TMPDIR if available
-
-2000-09-16  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): move
-	the setting of toFormat before asking for bad blocks, seems to fix
-	things?? weird :-/
-
-	* network.pm (miscellaneousNetwork): fix the setting of focus on
-	error (tx2Thomas Poindessous :)	
-
-	* install_steps_interactive.pm (configurePrinter): changed
-	"Cancel" to "None" (for Thomas Poindessous :)
-
-	* printer.pm (poll_ppd_base): max polling time raised from 10s to
-	30s (for Till)	
-
-	* install_steps.pm (ask_mntpoint_s): don't force partition type to
-	be ext2 (at least if it's a known fs) (for Warly)
-
-2000-09-15  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-15  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (set_help): save the help message displayed
-	in $o->{current_help}
-	* install_gtk.pm (create_big_help): display $o->{current_help}
-
-	* mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.	
-	* install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
-	* install2.pm (selectMouse): adapted for mouse::read now returning
-	an hash ref
-
-	* detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
-	one function (now takes the device in the parameter)
-
-	* interactive.pm (ask_from_treelistf): added (just like
-	ask_from_listf, but with a tree)
-
-	* Xconfigurator.pm: the reference is now nbuttons to
-	know wether to put Emulate3Buttons or ZAxisMapping.
-	* Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
-	Banshee too.
-
-	* Xconfig.pm: guess nbuttons based on Emulate3Buttons and
-	ZAxisMapping.
-
-	* common.pm (availableRamMB): replace availableRam, now use the
-	size of /proc/kcore (what else to find the real ramsize?)
-
-	* common.pm (cat__): created
-
-	* install2.pm (main): add field meta_class in $o. Can be
-	'desktop', in case option desktop is given, or if /desktop/i is
-	found in /VERSION
-
-	* install_steps.pm (miscellaneous): for lnx4win, always have
-	'mem=' (so that the initrd is visible by both windows
-
-	* install2.pm (main): add option "desktop"
-
-	* install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format
-
-	* install_interactive.pm (partitionWizardSolutions): 
-	use only TrueFS for existing_part
-	(partitionWizard): have only "loopback" for lnx4win
-
-	* pci_probing/pcitable: associate Voodoo5 with Voodoo5
-
-	* share/Cards+: add Voodoo5
-
-	* bootloader.pm (suggest): add entry linux-nonfb (called linux-up
-	for smp)
-
-2000-09-14  DrakX <install@mandrakesoft.com>
-
-	* snapshot uploaded
-
-2000-09-12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm, mouse.pm: moved probing serial port before to
-	detect a wacom tablet (even if a PS/2 or USB mouse is found).
-	* help.pm: corrected reference to previous version of LM (jloup).
-	* install2.pm: removed duplicate code for getting network
-	configuration, using network module.
-	* netconnect.pm: intf is now a hash and no more an array.
-	* network.pm: changed nature of intf to hash from array, reworked
-	write_resolv_conf function to keep old code in comment but only
-	when not used anymore (to make it easier by hand modification).
-	* printer.pm: SOCKET accessible to expert only (jloup).
-	* printerdrake.pm: local port only available for expert if a
-	printer has been detected (jloup).
-
-2000-09-11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: reorganized choices of 3D optimizations, added
-	experimental support for expert users.
-	* install_steps_interactive.pm: removed question to keep XF3.
-
-2000-09-05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: removed all previous URI specific mode and
-	added socket and expert URI general mode.
-	* printer.pm: fixed bugs, start lo interface before cups.
-
-2000-09-04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added pnm2ppa and lm110 support in cups
-	configuration. probe for printer device (parallel) and try to
-	install usb for printer.
-	* printer.pm: removed local printer configuration for cups (keep
-	only local configuration using URI).
-
-2000-09-01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
-	is installed, make 16bits by default on 3D hardware acceleration,
-	fixed selection of hardware for hardware acceleration.
-	* install_steps.pm: add cups for printer configuration, used for
-	auto_install. added new function to add packages only if requires
-	are already satisfied.
-	* standalone/printerdrake: updated.
-
-2000-08-31  dam's  <damien@mandrakesoft.com>
-
-	* moved many things to network.pm and any.pm
-	* everything should be broken now.
-
-2000-08-31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: removed printer default config (now obsoleted).
-	* install_steps_interactive.pm: add cups support.
-	* printerdrake.pm: add cups support.
-	* printer.pm: add cups support.
-
-2000-08-31  Frederic Lepied  <flepied@mandrakesoft.com>
-
-	* install_any.pm (setPackages): install the right glide module
-	according to the Voodoo card detected.
-
-	* Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
-	(autoDefaultDepth): default depth to 16 for Voodoo cards except
-	for Voodo5 ones.
-
-2000-08-29  dam's  <damien@mandrakesoft.com>
-
-	* moved pppConfig in netconnect.pm and any.pm
-	* moved miscellaneousNetwork in any
-	* modem configuration is now useable in standalone mode.
-
-2000-08-29 David BAUDENS <baudens@mandrakesoft.com>
-
-	* install_steps_interactive.pm: change Small/Normal/Full ->
-	  Minimum/Recommanded/Complete (aka make FredB happy)
-
-2000-08-28  dam's  <damien@mandrakesoft.com>
-
-	* draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
-	and french alcatel ADSL implemented.
-	* Xconfigurator.pm (autologin) : use of the new autologin system.
-
-2000-08-24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* ../update_kernel*: changed reference from extract_archive to
-	packadrake.
-	* Makefile*: added live_install and live_install2.
-	* Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
-	Pro AGP card type, commented SiS and S3ViRGE support by GLX.
-	* commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
-	updated to use packdrake now.
-	* install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
-	manage live upgrade.
-	* modules.pm: use standard modprobe command for load in live
-	upgrade.
-	* netconnect.pm: added minimal modification for being compilable.
-	* rescue/list: added packdrake and sfdisk.
-	* live_install, live_install2: live upgrade of package.
-
-2000-08-22  dam's  <damien@mandrakesoft.com>
-
-	* drakfuck (netconnect):finished isdn PCI/ISA card implemetation
-	* added isdndb.net: providers database
-
-2000-08-20  dam's  <damien@mandrakesoft.com>
-
-	* moved Netconnect.pm to netconnect.pm
-	* moved DrakFuck to drakfuck
-
-2000-08-18  Pixel  <pixel@mandrakesoft.com>
-
-	* share/Cards+: for i810, force VideoRam
-
-2000-08-18  dam's  <damien@mandrakesoft.com>
-
-	* modules.pm: added isdn type in @drivers_by_category. corrected
-	load_thiskind (thx pixel) : it's not unsafe anymore
-	* Netconnect.pm: just display PCI isdn card recognized.
-	
-2000-08-17  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm: many cleanup. moved some functions to common,
-	any or install_interactive (newly created)
-
-2000-08-16  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_interactive.pm(configureNetwork): added call to
-	isdn configuration
-	* added standalone/DrakFuck: standalone entry point to configure
-	internet connexion.
-	* added Netconnect.pm: internet connexion functions.
-
-2000-08-11  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectInstallClass): yet a bigger
-	warning so that people don't choose expert installs. Also set the
-	focus on "Custom" by default.
-	
-	* install_steps_interactive.pm (doPartitionDisks): created, calls
-	the wizard.
-	* install_steps.pm (doPartitionDisksBefore,
-	doPartitionDisksAfter): created (was mainly in
-	install2::doPartitionDisks)
-	* install2.pm (doPartitionDisks): much cleanup
-	* install_any.pm (partitionWizard): working state (still rough)
-
-2000-08-08  Pixel  <pixel@mandrakesoft.com>
-
-	* standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
-	cdrom addmedia
-
-2000-08-07  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Resize): 
-	* install_steps_gtk.pm (doPartitionDisks): remove the
-	before_leaving ensuring the filehandle is closed
-	* resize_fat/main.pm (DESTROY): use a better solution for ensuring
-	the filehandle is closed
-
-2000-08-07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added SiS6326 in the list of chipset that
-	needVideoRam, reported on ml.
-	* install_steps.pm: fixed auto install of printer.
-
-2000-08-06  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive.pm (ask_from_listf): created this GREAT function
-	that should have been created a long time ago.
-	* any.pm, install_any.pm, install_steps_gtk.pm,
-	install_steps_interactive.pm: a lot of rewrite to use the new
-	ask_from_listf, a lot of nice cleanup!
-
-	* fs.pm (df): created, returns the free space of the part. Save it
-	in $part->{free}
-
-	* install_steps_gtk.pm (doPartitionDisks): ensure the closing of
-	the device in case of error
-	* resize_fat/main.pm (new): ensure the closing of the device in
-	case of error
-
-	* install_any.pm (partitionWizard): the great partitioning wizard
-	is created. Not finished yet (nor called from anywhere)
-
-	* install_steps.pm (doPartitionDisksLnx4win): created function out
-	of doPartitionDisks
-
-	* install_steps_gtk.pm (installPackages): removed the displaying
-	of size to install (people are bothered cuz not the same size)
-
-2000-08-06  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_steps_window): use drawing area
-	instead of button. Implemented all steps events. 
-
-2000-08-05  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): test a hack for usb mouse via hub
-	(sparhawk@enteract.com)	
-
-	* fsedit.pm (undo): force isDirty and needKernelReread only if hd
-	hasBeenDirty, otherwise believe the flag saved
-	* partition_table.pm (write): flag hd as hasBeenDirty
-
-	* install2.pm: a few renaming of methods so that the step names
-	correspond to install2 function and install_steps* methods (eg:
-	configureX & setupXfree unified to configureX)
-
-2000-08-04  dam's  <damien@mandrakesoft.com>
-
-	* any.pm (setAutoLogin): added this method to write xdm-config
-	* Xconfigurator.pm: clenead autologin code and use of above method
-
-2000-08-04  Pixel  <pixel@mandrakesoft.com>
-
-	* pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
-	it in case of max_size reached. only purpose is the log!
-
-	* install_steps_interactive.pm (choosePackages): in newbie, ask
-	between Small/Medium/Full install
-	* install_steps_interactive.pm (choosePackages): in expert, have
-	the min_mark be 0 instead of 1
-
-	* common.pm (find_index): added this nice function
-
-	* install_any.pm (getAvailableSpace_mounted): use common::df
-	* loopback.pm (getFree): use common::df
-	* commands.pm (df): use common::df
-	* common.pm (df): added
-
-	* diskdrake.pm (Resize)): add resizing of reiserfs
-	* share/list.i386: add resize_reiserfs
-
-
-2000-08-02  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm : autologin is functionall. When wmsession.d is
-	more up to date, I'll add the list of wm to launch at boot. It
-	writes in /etc/X11/xdm/xdm-config.
-	
-2000-08-01  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (miscellaneous): modify as chmouel want (aka, ""
-	instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)
-
-	* services.pm: separation between interaction and action.
-	* install_steps.pm (servicesConfig): the job is now done here	
-	* install_steps_interactive.pm (servicesConfig): only the asking
-	part	
-
-2000-08-01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed the below fixe, now ok.
-	* Xconfigurator.pm: fixed a bug for using default card flags
-	setting, add support for GeForce DDR for both 3.3 and 4.0.
-	* pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
-	XFree 3.3 as unsupported in XFree 4.0.
-	* share/Cards+: added "NVIDIA GeForce2 DDR (generic)".
-
-2000-07-31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: fixed provided package with choice in deps used with a
-	base package, complicated but kernel-fb or similar can be
-	unselected now.
-
-2000-07-27  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: changed expert message to ask
-	using XFree 3.3 instead of XFree 4.0 used by default (server).
-	* Xconfigurator.pm: make sure only one server is installed,
-	default to XFree 4.0 if supported unless XFree 3.3 accept
-	3D acceleration and not XFree 4.0, ask user in such case.
-	* pci_probing/pcitable: added Intel 815 pci ids.
-
-2000-07-26  dam's  <damien@mandrakesoft.com>
-
-	* install_steps_gtk.pm: applied new LN stars, logo title and help
-	logo. improved steps appearences.
-	* modified share/step-*.xpm
-	* added share/help.xpm
-	* updated ../HACKING to ling help logo.
-
-2000-07-21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: enable 3D acceleration configuration with
-	XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
-	Utah-GLX accelerated module.
-
-2000-07-20  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
-	{miscellaneous}{autologuser} + {miscellaneous}{autologing}.
-	* move some README content to ../HACKING
-
-2000-07-19  dam's  <damien@mandrakesoft.com>
-
-	* Xconfigurator.pm: added autologin boxes.
-	result is in {miscellaneous}{autologin} and in
-	{miscellaneous}{autologuser}
-	
-2000-07-19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* any.pm: added default root to existing root device when adding
-	an entry in bootloader.
-	* bootloader.pm: avoid duplicating entry (floppy and old-floppy)
-	when they are identical.
-	manage hackkernel by suggest an entry by default if installed.
-	* install_steps.pm: reworked symlink closure for bootloader
-	to keep previous configuration.
-
-2000-07-11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
-	this include a configure_entry from silo.pm to build a initrd if
-	used.
-	* share/compssList: added kde2 packages.
-	* share/compssUsers: added kde2 group, renamed kde to kde1 group
-	specific.
-
-2000-07-07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm (choosePackages): always execute setPackage to copy
-	hdlist* and depslist files (support mixed partitionDisks and
-	choosePackages).
-	* install_any.pm (setPackages): avoid clearing upgrade flag.
-	* install_steps.pm (choosePackages): use $first_time to avoid
-	reselection of packages according to compssList.
-	* install_steps_interactive (choosePackages): use $first_time and
-	$individual to avoid reselection of packages according if user go
-	back to step choosePackages.
-	* pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
-	depslist files in /var/lib/urpmi.
-	* diskdrake.pm: fixed uneditable combo for Mount point action.
-
-2000-06-23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: better approach for Sun* server in newbie.
-	* fs.pm: added romfs support for mount.
-	* fsedit.pm: changed auto allocation for partitions for sparc*.
-	* install2.pm: restored bootdisk creation and auto install boot
-	disk creation for sparc*.
-	* install_any.pm: changed vfat to romfs when mounting kickstart
-	floppy on sparc*.
-	* install_steps.pm: avoid proposing formating sunos partition.
-	* install_steps_interactive.pm: boot disk for sparc* and support for
-	installation of SILO on /boot partition (sparc*).
-	* install_steps_newt.pm: removed cylinder 0 bug warning.
-	* interactive.pm: fixed typo for not_edit set to 1 by default.
-	* partition_table.pm: fixed get_holes on sparc* where a whole disk
-	partition caused problems.
-	* partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
-	* silo.pm: handle /boot partition, install silo.conf in /boot and
-	make a symlink from /etc.
-	* share/list.sparc: added losetup and genromfs for boot disk creation.
-
-2000-06-21  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* lang.pm: changed the way console font data is written; not all
-	of the [0], [1], [2] values must defined, so three cases must be used.
-	Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
-	be used by console-tools to load the proper compose table
-
-2000-06-20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* c/sbus.c: added some functions for silo.c integration.
-	* c/silo.c: initial release including write in prom, and translation
-	of disk name from openprom to linux, rh version modified.
-	* silo.pm: added write in prom, support of sunos boot from silo.
-	* partition_table.pm: added support for ufs partition like windows one.
-	* install_steps_interactive.pm: added other entries in silo.
-	* install_steps.pm: support sunos partition.
-	* install_any.pm: automatically mount sunos partition with diskdrake.
-	* fsedit.pm: added /mnt/sunos suggested mount point.
-	* fs.pm: added ufs support for mount.
-
-2000-06-19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm: modified for getting sparc crypto file for sparc*.
-	* modules.pm: make sure to load sd_mod when needed.
-	* pci_probing/main.pm: always use loaw_endian in pci structs.
-	* pci_probing/translate-pcitable.pl: added arch specific module name
-	translation.
-
-2000-06-16  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): rename conf.modules to modules.conf if
-	needed. Outputs to modules.conf
-
-	* detect_devices.pm (cdroms): fix using scd0 for ide-burners when
-	already a scsi cdrom drive
-
-2000-06-13  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* pkgs.pm: added 'acon' requirement for all right-to-left languages
-
-2000-06-07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: added SunOS partition as blue for diskdrake.
-	* install_steps_interactive.pm: make sure of no division by zero may
-	happen.
-	* install_steps_newt.pm: added WARNING for fdisk on sparc*.
-	* modules.pm: make sure of loading sd_mod module after any scsi module.
-	* sbus_probing/main.pm: insmod openprom before trying sbus probing.
-	* pkgs.pm: corrected by use of parabolic solution for size approximation.
-	* silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.
-
-2000-06-05  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* install_steps.pm,lang.pm: added load_console_font, to load the 
-	proper console fonts (text mode install is not very useful otherwise)
-
-2000-06-03  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
-	* diskdrake.pm (Type): don't accept less than 32MB part for reiserfs
-
-2000-06-01  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
-	it fits better with the other fonts. Added a 'README' file with
-	some comments and the required copyright notice
-
-2000-05-29  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* Xconfigurator.pm: added support for SBUS card autodetection.
-	* commands.pm: added lssbus to list SBUS devices detected.
-	* detect_devices.pm: removed alpha restriction on USB.
-	* install_steps_interactive.pm: added SBUS support.
-	* c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
-	* c/stuff.xs.pm: added wrapper for sbus.c interface.
-	* sbus_probing/main.pm: initial revision (inspired from kudzu).
-
-2000-05-27 Adam Lebsack <adam@mandrakesoft.com>
-
-	* share/list.ppc: various PPC modifications, for HFS
-	* partition_table_mac.pm: bug fixes
-	* partition_table.pm: various HFS fixes, isHiddenMacPart()
-	* diskdrake.pm: added HFS to top buttons when run on PPC
-	* keyboard.pm: fixed name of mac-fr2-ext keymap
-	* install_steps_gtk.pm: added Xpmac server support for PPC.
-	* install_steps_interactive.pm: disallow hardware configuration on PPC for
-	now.  All drivers should be in the kernel. setup_this_kind().
-	* fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
-	our partition table read.  Added PPC grep condition for PPC in get_visible_fstab.
-	* fs.pm: fix argument for HFS formatting.	
-	* Makefile: special installation of PPC files.
-
-2000-05-25  Chmouel Boudjnah  <chmouel@mandrakesoft.com>
-
-	* standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
-	alpha|sparc.
-
-2000-05-25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* silo.pm: added configure_entry to try creating an initrd for an image
-	entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
-	* commands.pm: fixed insmod command to take modules64.cz* on sparc*
-	* install2.pm: removed create boot disk and create auto install disk on
-	sparc*. force writing of /etc/conf.modules for step setupBootloader.
-	* install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
-	* install_steps_interactive.pm: added missing $prefix for glob_. call
-	configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
-	* modules.pm: updated alias for sparc*.
-	* any.pm: fixed proprable wrong test for setupBootloader in beginner at
-	the very beginning.
-	* printer.pm: fixed typo.
-	* Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
-	resolution for these server too.
-
-2000-05-24  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
-	* partition_table_sun.pm: fixed a bug when reading partition table
-	with unused partition in the middle of the table.
-
-2000-05-23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* common.pm: update arch to take into account sparc and sparc64. added
-	better_arch and compat_arch function.
-	* silo.pm: fixed adding new kernel automatically.
-	* install2.pm: removed create boot disk stuff for sparc*.
-	* install_steps.pm: added initrd generation for alpha. added ldconfig
-	at end of installation. removed /usr/bin/dumpkeys existence test on
-	sparc*, should be added in the future.
-	* install_steps_interactive.pm: removed supermount for sparc*.
-	* install_steps_gtk.pm: added /dev/kbd device creation and permedia2
-	support for sparc*. removed screen limit of 1024x768.
-	* detect_devices.pm: fixed problem on machine with really no IDE interface.
-	* modules.pm: added support for 32 and 64 bit architectures on sparc*.
-	* install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
-	partition.
-	* pkgs.pm: added support for multi-arch rpm file (need for sparc*),
-	fixed correctSize and invCorrectSize to take back a linear approximation
-	above 9Gb approximatively. removed ftp rewind as broken currently.
-	* keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
-	globing (removed) against existing '*'.
-	* partition_table.pm: removed support for non SUN partition table, as it
-	may freeze the kernel or may be blanked?
-	* Xconfigurator.pm: take Sun24 server by default on sparc*, add support
-	for permedia2 card (3DLabs server).
-	* share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
-	* Makefile: added support for modules and modules64 for sparc*.
-	* c/stuff.xs.pm: added kernel_arch function for getting the current true
-	architecture provided by the kernel (uname -m).
-
-2000-05-09  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (kdeicons_postinstall): the URL link to doc must
-	be $lang/index.html, not only $lang.
-
-	* standalone/mousedrake: add handling of XF86Config-4
-
-	* any.pm (setupBootloader): fix bug (was adding 2 glob_'s)
-
-2000-05-08  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): move the touch of some files here to please linuxconf
-	
-	* install2.pm (miscellaneous): s/KBD/KEYBOARD/
-
-	* lilo.pm (install_grub): don't keep symlinks for reiserfs
-	* lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)
-
-	* install_any.pm (getHds): default mount point for windobe in
-	lowercased for StartOffice(!)
-
-2000-05-08  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
-	  Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
-	* keyboard.pm: Added new Lithuanian keyboard and changed the
-	  string for brazilian ABNT-2 to state more clearly its ABNT nature
-	  (it is not a standard PC keyboard; it uses some different keycodes)
-
-2000-05-07  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (choosePackages): return availableCorrected
-	instead of available
-
-	* pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)
-
-	* modules.pm (text2driver): same as text2lang below
-	* keyboard.pm (text2keyboard): same as text2lang below
-	* lang.pm (text2lang): replace the while (... each) by a foreach
-	(keys) (because each is dangerous if loop is exited)
-
-	* install_steps_interactive.pm (selectKeyboard): better handling
-	of multiple langs question.
-
-	* ftp.pm (new): Timeout set to 60 (seconds), was default (120)
-
-	* install_steps_interactive.pm (setup_thiskind): remove ide-*
-	from modules displayed as loaded.
-
-2000-05-06  Pixel  <pixel@mandrakesoft.com>
-
-	* fsedit.pm (check_mntpoint): verify that standard mntpoints (/
-	/usr) are not on not trueFS
-
-	* any.pm (setupBootloader): add $prefix for the 2 glob_'s
-
-2000-05-07  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua
-
-2000-05-06  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* printerdrake.pm: fixed English error
-
-2000-05-05  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm (monitorConfiguration): remove the special case
-	for fbdev.
-
-	* install_steps_interactive.pm (setup_thiskind): replace return by
-	next in case load_module fails.
-
-	* install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade
-
-	* Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
-	* Xconfigurator.pm (testFinalConfig): force $bad_card for xf4
-
-	* pkgs.pm (correctSize): updated for 7.1
-
-	* install_any.pm (getAvailableSpace): move the removing of
-	$minAvailableSize here.
-
-2000-05-04  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (configurePrinter): give clicked to printerConfig
-
-	* interactive.pm (ask_from_entries_ref): set default val if not_edit
-
-	* interactive_newt.pm (ask_from_entries_refW): remove setting of
-	default val. Now done in interactive::ask_from_entries_ref
-
-	* interactive_gtk.pm (ask_from_entries_refW): handle empty value
-
-	* modules.pm (read_already_loaded): ensure that already loaded
-	modules are put in %loaded.
-	* modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)
-
-	* lilo.pm (install_lilo): truncate label's to 15 chars
-
-	* install_any.pm (generate_ks_cfg): fix missing space
-	* install_any.pm (generate_ks_cfg): fix bug for nfs comand
-
-	* install2.pm: get rid of autoformat
-	* install_steps.pm (choosePartitionsToFormat): get rid of autoformat
-
-2000-05-03  Pixel  <pixel@mandrakesoft.com>
-
-	* any.pm (setupBootloader): replace ask_many_from_list by
-	ask_from_list for bootloader choice
-
-	* services.pm (drakxservices): stop immediately service if removed
-
-	* install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
-	* install_steps.pm (afterInstallPackages): touch some files to
-	please linuxconf
-
-2000-05-03  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: updated min size, fixed kppprc generation.
-	* install_any.pm: make sure postinstall-rpm is here before
-	erasing (avoid error on reboot only).
-
-2000-05-02  Pixel  <pixel@mandrakesoft.com>
-
-	* raid.pm (format_part): don't call raid::make if part is already
-	formatted (as raidstop fails)
-
-	* Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
-	more	
-
-	* install_steps_interactive.pm (setup_thiskind): make insmod'ing
-	fail a simple warning.
-
-	* Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
-	* share/MonitorsDB: take new one from RedHat
-
-	* standalone/drakboot: added kfloppy
-
-	* g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
-	not to have it)
-
-2000-05-01  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setRootPassword): remove
-	NIS_server, use NIS instead
-	* install_any.pm (setAuthentication): remove NIS_server, use NIS instead
-
-	* standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist
-
-2000-04-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps.pm (afterInstallPackages): fix yet another bug for
-	ttf from windobe handling
-
-	* install_steps_interactive.pm (selectInstallClass): hide beginner
-	mode in corporate. Display special help.
-
-2000-04-29  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
-	text to be properly aligned (reported by Craig Chang
-	<craig_chang@taipei.siscomm.com.tw>)
-	* common.pm: now that po handling is correct, I changed the order
-	of reading variables so that it follows the standards ($LANGUAGE first)
-	* share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251
-
-2000-04-28  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps*.pm: added support for selection of package during
-	upgrade the same way it is done for installation. added check of
-	minimal size, abort else (at least let the user know about :-)
-	fixed crypto if no network interface available.
-	* install2.pm: fixed problem during upgrade that lost network
-	configuration.
-
-2000-04-28  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_raw): don't call commands::insmod, do it in
-	place. Merge with load_multi
-
-	* install_steps.pm (afterInstallPackages): fix windobe ttfonts
-	symlinking	
-
-	* Xconfigurator.pm (cardConfiguration): load module agpgart for
-	i810
-	
-	* install_any.pm (getHds): changed the mount point setting for
-	windows partitions as device_windobe is not unique
-
-2000-04-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_steps_window): changed to adapt to
-	new hidden format
-
-	* install2.pm (@installSteps): changed the way hidden is handled.
-	Now it is a true perl expression (great power now)
-
-	* install_steps_gtk.pm (selectInstallClass1): update steps window
-	before asking normal/devel/server. Nicer!
-
-	* install_steps_interactive.pm (configureNetwork): when "Cancel"
-	pressed at network interface configuration do not skip all
-	configuration.	
-
-2000-04-26  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm (pppConfig): modified a lot, removed template
-	file for ifcfg and chat file.
-
-2000-04-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): use a fix width for
-	the tree column (so that the checkbox are always visible without
-	scrolling)	
-
-	* standalone/drakboot: drakfloppy and gfloppy are X only, no need
-	to propose them in console
-	
-	* install_any.pm (relGetFile): added auto_inst to files to get
-	from Mandrake/base
-
-	* install2.pm (main): changed auto_inst behaviour
-
-	* standalone/adduserdrake: fix a bug (s/$o/$in/g)
-
-	* interactive_newt.pm (ask_from_entries_refW): now handling
-	complete/changed/focus_out callbacks (at least more than before)	
-
-	* Newt/Newt.xs: added rough callback handling
-
-2000-04-25  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* printerdrake.pm: added support for PPA more easily, allow
-	printers entry using ppa driver event if pnm2ppa not installed,
-	install it if neccessary after.
-	* network.pm, install_steps.pm, install_steps_interactive.pm:
-	added support for stoping a network interface, usefull for ppp0 to
-	avoid using it too long.
-	* install_steps.pm: fixed missing local on pap_secrets file.
-
-2000-04-25  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (install): moved the generation of the keytable here. It
-	is used by both lilo & grub (lilo is not always installed as was
-	assumed)	
-
-	* common.pm (formatAlaTeX): remove bounding spaces
-
-	* pkgs.pm (setSelectedFromCompssList): remove the hack for min
-	mark 25 in beginner
-	* install_steps_interactive.pm (choosePackages): set $min_mark to
-	25 in beginner
-
-2000-04-24  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (setupXfree): add a yesorno
-	question for choosing between XF4 and XF3 in expert
-
-	* install_steps_gtk.pm (choosePackagesTree): enlarge the tree window
-
-	* install_any.pm (update_userkderc): make sure uid and gid are kept
-
-	* diskdrake.pm (Create): add Extended_0x85 as a choice for expert
-
-	* partition_table.pm (add_extended): handle a 3rd arg,
-	$extended_type to tell which kind of extended partition is wanted
-	* partition_table.pm (adjust_main_extended): in non-expert,
-	automatically set extended to linux-extended if there's only
-	linux-type partitions.	
-
-2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>
-
-	* install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
-	  and not for byte. RAM is expressed in megabytes -> MB
-
-2000-04-19  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: fixed crazy mutli CD manipulation.
-	* printer.pm: fixed wrong prototype of print_pages.
-	* install2.pm: set version to 7.1 for crypto stuff.
-	* crypto.pm: commented ackbar crypto site.
-
-2000-04-17  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
-	linuxconf)	
-
-2000-04-14  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePartitionsToFormat): don't
-	ask about checking bad blocks for reiserfs, cuz not handled
-
-	* fs.pm (mount): reiserfs handling
-	* fs.pm (format_reiserfs): added
-	* fs.pm (write_fstab): add option "notail" for reiserfs if
-	the partition holds the kernel (/boot or /)
-
-	* partition_table.pm (isTrueFS): added, replaces most occurences
-	of isExt2
-
-2000-04-12  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2.pm: force installation step if package have been
-	selected on step choose packages.
-	* install_any.pm: protected against die in perl (setstep or
-	theme_changed).
-
-2000-04-11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* resize_fat: added some limits verification.
-	* interactive_gtk.pm: corrected swap of arg with help adding.
-
-2000-04-10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
-	which is used by printerdrake only. drops key bindings.
-
-2000-04-07  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* tools/serial_probe: obsoleting pnp_serial which is now replaced
-	by this one, taken from kudzu, really faster and probe all serial
-	devices at one time. modified to probe correctly modem :-)
-	* mouse.pm: updated to use serial_probe interface of
-	detect_devices.pm.
-	* detect_devices.pm: modified to use serial_probe, cache probed
-	devices to avoid reprobing.
-
-2000-04-06  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm, install_steps.pm: added support
-	for peerdns options of ppp, so removed dns address unless expert.
-
-2000-04-05  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* crypto.pm, install_steps_interactive.pm, install2.pm,
-	install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
-	and depslist-crypto. dependancies are not supported but with a
-	simpler format of depslist file where closure are not done and
-	only package name are used for dependancies.
-	* pkgs.pm: added better support for multi CD manipulation,
-	including selection and refus.
-
-2000-04-04  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm: modified selection packages from compssList by
-	incremental selection, much more quickly.
-	added selected medium for selecting a package.
-	* install_any.pm: refused media hash transfered to selected value
-	of media table.
-	@needToCopy list should only have package of default medium.
-
-2000-04-03  Pixel  <pixel@mandrakesoft.com>
-
-	* fs.pm (format_ext2): add options "-b 1024 -O none" for alpha
-
-2000-03-31  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_gtk.pm: made changeMedium sub modification
-	permanent.
-	* pkgs.pm: modified upgrade to avoid use of header.
-
-2000-03-31  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: some more choices for PPC keyboards
-
-2000-03-30  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install2pm: added eval around loading af_packet and postinstall
-	copy of RPMS.
-	* devices.pm: added /dev/kdb for SPARC.
-	* install_any.pm: modified multi CD management, postinstall copy
-	of RPMS.
-	* install_steps_gtk.pm: added support for Xsun server for SPARC.
-	* install_steps_interactive.pm: added multi CD dialog box for
-	selecting CD available. Serialized ethernet configuration and ppp
-	configuration.
-	* pkgs.pm: added check for infinite recursion for bad depslist.
-	* printer.pm: better test for reparse of printerdb.
-	* Xconfigurator.pm: added support for Xsun server for SPARC.
-
-2000-03-30  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (choosePackagesTree): enhance tree selection
-
-2000-03-29  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (wait_messageW): add some padding (nicer)
-
-	* install_steps_interactive.pm (generateAutoInstFloppy): created,
-	creates a floppy for auto installs.
-
-	* install_any.pm (generate_ks_cfg): created, generates stage1
-	ks.cfg file
-
-	* share/po/DrakX.pot: added special comment for grub entry
-
-2000-03-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (selectKeyboard): sort langs for
-	many-lang install
-
-	* mouse.pm (write): add WHEEL telling if a wheel mouse is there
-
-2000-03-28  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: added entries for all three Armenian keyboards
-
-2000-03-26  Pixel  <pixel@mandrakesoft.com>
-
-	* install_any.pm (install_urpmi): full support for multi-hdlist's	
-
-	* pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
-	$prefix/var/lib/urpmi
-	* pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
-	fake name. Access via /tmp/$hdlist is given for non-fake name
-
-	* detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)
-
-2000-03-25  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm: updated to the new format of entries. It was an hash.
-	Now the key is field kernel_or_dev, and entries is an array.
-	
-	(get): added, it returns the entry using a kernel
-	   (needed because entries is no more a hash)
-
-	* install_steps_interactive.pm (setupLILO): adapted to the new format
-
-	* Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling	
-
-	* fsedit.pm (suggest_part): if suggested part contains a field
-	"hd", ensure the partition is created on this hard drive
-
-	* install2.pm (main): before leaving installation, remove
-	/var/lib/urpmi if urpmi not installed	
-
-	* diskdrake.pm (Resize): ext2resize to size $part->{size} instead
-	of $size
-
-2000-03-24  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (hasHPT): added. Now nice handling of hpt366
-	(ultra66) without rebooting and making special floppy :)
-
-	* lilo.pm (install_grub): much better grub configuration (better
-	than lilo's :pp)
-
-	* install_steps.pm (setupBootloaderBefore): remove entry floppy
-	for security > 3
-
-2000-03-23  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (selectMouse): added, takes care of telling
-	the X server if the user changed the mouse type. Only done if
-	a serial mouse is chosen.
-
-	* install_steps_newt.pm (doPartitionDisks): add a call to
-
-	* mouse.pm (write): added "device=" in etc/sysconfig/mouse for
-	devfs (it looses the symlink /dev/mouse)
-
-2000-03-22  Pixel  <pixel@mandrakesoft.com>
-
-	* pci_probing/pcitable: replace Server:Rage128 by proper XFree entry
-
-2000-03-20  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* detect_devices.pm, fs.pm, install_any.pm: added supports for
-	LS-120 floppy drive and icons on desktop of KDE (untested).
-	* printer.pm, printerdrake.pm: added supports for PPA interface in
-	new rhs-printfilters, always enable "Print text as postscript"
-	option for such printers.
-
-2000-03-20  Pablo Saratxaga <pablo@mandrakesoft.com>
-
-	* keyboard.pm: changed XKB name for Swedish keyboard
-	  changed XKB names for Russian and German keyboards
-	  added a choice for "Croatian" keyboard
-	* share/compss{,List}: added various new locales-*, ispell-* 
-	  and netscape-* files. changed ppa to pnm2ppa.
-
-2000-03-17  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps.pm: added setup for all configured queue.
-	* install_steps_interactive.pm: modified for retrieving packages
-	or current configuration.
-	* printer.pm: correction, tested retrieve of printer
-	configuration without printtool comments in printcap file: added
-	update of entry according to gsdriver used (untested again).
-	* printerdrake.pm: better handling of cancel, manage of multiple
-	queue definition together (as lp|My printer).
-
-2000-03-16  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_steps_interactive.pm: moved in printerdrake.pm the test
-	of printer usage.
-	* printerdrake.pm: heavy modification to handle multiple queue,
-	corrected some bugs too, added much more features as printtool.
-	* printer.pm: added more features for filter, allow printer to be
-	retrieved without help of printtool id in printcap file (untested).
-
-2000-03-14  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Loopback): handling of the file loopback: test
-	existence of the file and take its size.
-
-2000-03-14  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* install_any.pm: corrected for duplicate file on other CD.
-
-2000-03-13  Pixel  <pixel@mandrakesoft.com>
-
-	* detect_devices.pm (floppies): don't return hash but the device name
-
-2000-03-13  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* pkgs.pm, install_any.pm: small correction for multiple media
-	installation.
-	* tools/syncrpms: added for handling synchronisation of multiple source
-	rpm directories (and multiple target), include cleaning.
-	* tools/closurepkgs: tools to get rpm that may be installed by DrakX
-	after normal packages installation (printer, network, X11...), may
-	be used to duplicate on other CD some important stuff of the first
-	one.
-
-2000-03-12  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_interactive.pm (choosePackages): compute the
-	max_size very simply (sum of all package sizes), otherwise too costly
-
-	* pkgs.pm (install): call cleanHeaders at the end
-	* pkgs.pm (cleanHeaders): created
-
-	* install2.pm (miscellaneous): /etc/msec/init.sh is now
-	/usr/sbin/msec (yoann thanks for not telling :pp)
-
-	* pkgs.pm (install): remove the $prefix of mountpoints for not
-	enough room to install error message
-
-2000-03-11  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (_create_window): add callback on focus to
-	ensure_focus. The result is no more 3 focus states with 2 buttons.
-
-	* interactive_gtk.pm (ask_from_treelistW): better keyboard handling
-
-	* raid.pm (make): check the result of mkraid. Suggest raidtools
-	are missing in standalone diskdrake
-
-	* devices.pm (set_loop): created, searches for an available
-	loopback and sets the file to it
-
-	* lilo.pm (dev2grub): fixed a missing slash
-
-	* interactive_gtk.pm (wait_message_nextW): do not update if same
-	message, otherwise silly gtk won't do anything and we'll wait
-	forever :(
-
-2000-03-10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* *.pm: heavy modification to take into account multiple media
-	installation.
-
-2000-03-10  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (@install_classes): cleanup, no more i18n (is now in
-	install_steps_interactive), remove old entries
-
-2000-03-09  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): don't add alias block-major-11 in every case
-	* modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)
-
-	* fs.pm (format_*): move the @options before the device
-
-	* loopback.pm: created, added a lot of stuff for loopback in
-	diskdrake.pm, fs.pm...
-
-2000-03-08  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm: %type2fs replaced ox402 by 0x402
-
-	* detect_devices.pm (cdroms): fix "scd" (should be "scd0")
-
-	* install_any.pm (install_urpmi): update for new hdlist.cz2
-
-2000-03-07  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/
-
-	* install_steps_interactive.pm (addUser): force add a normal user
-	for security 4
-
-2000-03-05  Pixel  <pixel@mandrakesoft.com>
-
-	* my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
-	(tis the Gtk-Perl 0.7002 was of doing)
-
-2000-03-04  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (write_conf): add ide-floppy to the modprobes of
-	post-install supermount
-
-2000-03-03  Pixel  <pixel@mandrakesoft.com>
-
-	* commands.pm (ps): add RSS to ps command
-
-2000-03-02 Adam Lebsack <adam@mandrakesoft.com>
-
-	* mouse.pm: added mac mouse detection to mouse::detect.
-	* detect_devices.pm: added a routine to probe /dev/usbmouse on macs.
-
-2000-03-01  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* *.pm: heavy modification to take into account smaller
-	transaction during installation.
-	still a lot of test to perform, no provides updated currently and
-	building of hdlist.cz2 and depslist.ordered need old files...
-	nothing done for hdlist.gz during post installation, but
-	hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
-	installation of packages as extract_archive need a true file].
-
-2000-03-01  Pixel  <pixel@mandrakesoft.com>
-
-	* lilo.pm (install_grub): creation
-
-	* network.pm (write_interface_conf): ONBOOT = !pcmcia
-
-	* install_steps_gtk.pm (new): more intelligent SIGCHLD handler
-
-2000-02-29  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm: moved common network stuff from "net" to "network"
-	(modules like nfs lockd...)
-
-	* fs.pm (write_fstab): moved the sort to the right place
-
-	* services.pm (drakxservices): chkconfig --list is i18n'ed :(
-	set LANGUAGE=C before
-
-	* partition_table_raw.pm (get_geometry): geom{cylinders} must not
-	be a decimal value :)
-
-	* install_steps_gtk.pm (create_logo_window): set_name logo for
-	logo window
-	* share/install.rc: force disabling of background image theme
-
-	* install_steps_gtk.pm (enteringStep): add step information for
-	console 1
-
-	* any.pm (addKdmIcon): new function
-	* install_steps.pm (addUser): handle field icon
-	* install_steps_interactive.pm (addUser): add choice of kdm icon
-	* standalone/adduserdrake: add choice of kdm icon
-
-	* diskdrake.pm (ask_all_data...): change for easier i18n
-
-	* install_steps.pm (miscellaneous): add CLEAN_TMP handling
-	(need cleaning?)
-	* install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
-	option in expert
-	* install2.pm (miscellaneous): add CLEAN_TMP option for
-	/etc/sysconfig/system	
-
-	* install_steps_interactive.pm (miscellaneous): forbidden
-	useSupermount if high security.	
-
-	* mouse.pm (detect): fix bug (ttyS instead of ttyS0)
-
-2000-02-28  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
-	svga and accel. SVGA also wants 16 bpp. added ugly modeline for
-	800x600.	
-
-	* partition_table_raw.pm (get_geometry): when the
-	HDIO_GET_IDENTITY fails, defaults to what GETGEO gave
-
-	* install2.pm (main): use modules::load_multi to increase boot
-	start time
-
-	* modules.pm (load_multi): added this function for loading many
-	modules at once.
-
-	* install_steps_gtk.pm (new): increase time before timeout
-
-	* detect_devices.pm (cdroms): change the device associated with
-	ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(	
-
-	* modules.pm (write_conf): sort scsi_hostadapter's
-
-2000-02-27  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): load ide-probe and the like in 'prereq' type
-	so no aliases are added to conf.modules
-
-2000-02-25  Pixel  <pixel@mandrakesoft.com>
-
-	* devices.pm (make): small code cleanup
-
-	* partition_table_raw.pm (adjustEnd): more explicit error message
-
-	* fsedit.pm (allocatePartitions): fix a bug (size was getting too
-	big after each allocation) making adjustEnd cry
-
-2000-02-24  Pixel  <pixel@mandrakesoft.com>
-
-	* interactive_gtk.pm (new): added the "new" method to initialize
-	windowheight for isStandalone
-
-	* install_steps_gtk.pm (new): returns undef in case no X server
-	works	
-
-	* install2.pm (main): moved the ejectCdrom from install_steps::END
-	to here
-	* install2.pm (main): fix the $SIG{SEGV} handler
-	* install2.pm (main): added a "try again" in text install if the
-	"new" fails
-
-	* install_steps_interactive.pm (createBootdisk): fix an error for
-	non fdX choice of floppy drive
-	
-	* install_steps_interactive.pm (setup_thiskind): remove the
-	"defined @l"
-
-2000-02-23  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (%suggestedPartitions): remove any /boot entries
-	* install2.pm (selectInstallClass): removed the special code to
-	/boot entries from suggestedPartitions for on non-intel (and it
-	was buggy :)
-	* fsedit.pm (@suggestions): remove the /boot entry
-	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
-	* fsedit.pm (suggest_part): remove the 1024 cylinder special case
-
-	* install_steps_interactive.pm (setupLILO): replace linear option
-	by lba32
-
-	* lilo.pm (suggest): add lba32 by default
-
-	* install_steps_interactive.pm (load_thiskind): moved the HPT
-	stuff to install_any::ultra66 and call it.
-	Add sound card configuration (3 lines :)
-
-	* my_gtk.pm and interactive_gtk: resize the list and tree based on
-	root window size
-
-	* install_steps_gtk: $width and $height goes $::rootwidth and
-	$::rootheight, also other dimensions goes global (main::)
-
-	* commands.pm (strings): replace the typo \{$n,} by {$n,}
-
-2000-02-23  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* build_archive, extract_archive: changed format of TOC to speed
-	up extraction of archive, now 5 to 6 times faster to read TOC :-)
-	
-2000-02-22  Pixel  <pixel@mandrakesoft.com>
-
-	* Xconfigurator.pm: load "Cards" database only to translate NAME
-	to fields. Added file CardsNames created from Cards using
-	share/Cards2CardsNames. Kind of list of normalized NAMEs	
-
-	* MonitorsDB: replace the ` ' separator for vendor by `|'
-
-	* install_steps_interactive.pm (timeConfig): use ask_from_treelist	
-
-	* interactive_gtk.pm (ask_from_treelist): creation of
-	ask_from_treelist. Usage is just the same as ask_from_list with
-	one more argument (the separator eg: |, /)
-
-2000-02-21  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* diskdrake.pm: fixed deadlock while trying to create partition
-	when available space is equal or less than 2 cylinders. fixed
-	Create action on corrupted partition by removing stalling window.
-	Blocked partition table writing if there are error by forcing user
-	to correct partition table.
-	* partition_table.pm: fixed typo in verifyParts with cdie, added
-	verifyParts on Resize action.
-	
-2000-02-21  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (create_big_help): display the help in full
-	screen	
-
-	* my_gtk.pm (_create_window): add big help on F1
-
-	* common.pm (add2hash): now returns the first parameter
-
-	* mouse.pm (detect): really defaults to serial mouse
-
-	* interactive.pm: add ask_many_from_list_with_help and
-	ask_many_from_list_with_help_ref
-
-	* services.pm: creation, it handles what was in
-	standalone/drakxservices
-
-2000-02-18  Pixel  <pixel@mandrakesoft.com>
-
-	* install_steps_gtk.pm (createXconf): added /dev/ (X wants
-	"/dev/psaux" and not "psaux")
-
-	* diskdrake.pm (Create): show start sector even for non-expert on
-	non-i386
-
-2000-02-16  Pixel  <pixel@mandrakesoft.com>
-
-	* mouse.pm (detect): add defaults to serial mouse
-
-	* install_steps_gtk.pm (createXconf): remove the defaults to
-	serial mouse
-
-2000-02-15  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm: "After %s partition %s," inlined otherwise does
-	not please pablo and translators...
-
-2000-02-14  Pixel  <pixel@mandrakesoft.com>
-
-	* diskdrake.pm (Create): hide start sector choice for non-expert
-
-2000-02-11  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table_raw.pm (get_geometry): do not use the cylinder
-	number given by HDIO_GETGEO cuz limited to 16bits. Compute using
-	the total_sectors using HDIO_GET_IDENTITY
-
-	* c/stuff.xs.pm: added total_sectors (gives the number of sector
-	of a drive)
-
-	* modules.pm (load): ignore error in loading prereq's
-	
-	* modules.pm (@drivers_by_category): rcpci instead of rcpci45,
-	z85230 added
-
-	* commands.pm (mount): add modules::load_deps otherwise the
-	fs::mount won't succeed insmoding vfat if needed
-
-2000-02-11  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* fixed diskdrake to handle limit case when creating and resizing
-	partition table, address size limit and start sector limit.
-
-2000-02-11  Pixel  <pixel@mandrakesoft.com>
-
-	* install2.pm (main): add a callback on SEGV
-	-> message printed
-	-> that way, ENDs are called (otherwise skipped)
-
-	* install_steps_interactive.pm (setup_thiskind): handles the undef
-	value returned by load_thiskind
-	
-	* install_steps_interactive.pm (exitInstall): do not call
-	install_steps::exitInstall
-
-	* install_steps (exitInstall): removed
-	* install_steps (END): added (it does ejectCdrom)
-
-	* install_steps_interactive.pm (load_thiskind): returns undef if
-	error loading a module
-
-	* fs.pm (format_part): changed the prototype from $;$@ to $;@
-	otherwise, @options always have a value (mostly undef) and mkdosfs
-	fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)
-
-	* install_steps_interactive.pm (setup_thiskind):
-	add a $auto_probe_pci that overrules $o->{auto_probe_pci}
-	(that way no pci probe the second time)
-
-2000-02-10  Fran�ois Pons  <fpons@mandrakesoft.com>
-
-	* heavy modification of build_archive and extract_archive to manage
-	a TOC directly in archive file, handle bzip2 or gzip compression,
-	extract_archive can extract multiple files a time, with minimal
-	invocation of uncompress program and follow symlink and expand
-	directory contents.
-	* use build_archive/extract_archive for locales.
-	* fixed a min/max in install_steps_gtk for Resize/Create partition.
-	* fixed adjustEnd with dos partition table, take care of magic 63
-	sectors at beginning of partitions, a more solid method should be
-	used for that.
-
-2000-02-10  Pixel  <pixel@mandrakesoft.com>
-
-	* modules.pm (load_thiskind): skip modules "unknown" and "ignore"
-
-2000-02-09  Pixel  <pixel@mandrakesoft.com>
-
-	* partition_table.pm (add): cdie if maximum number of partitions
-	handled by linux is reached
-
-	* Xconfigurator.pm (chooseResolutionsGtk): display the graphic
-	card or server found
-
-	* install_any.pm (relGetFile): for mdkinst files, take care not to
-	have a double '/' (see debbugs #591)
-
-	* install_steps_interactive.pm (configureNetwork):
-	purpose: add ability to configure both modem and lan
-	         clean up the behaviour
-
-	* fs.pm (write_fstab): 
-	purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
-	also: rewrite of the part writing the fstab. 
diff --git a/perl-install/Makefile b/perl-install/Makefile
deleted file mode 100644
index 50944f882..000000000
--- a/perl-install/Makefile
+++ /dev/null
@@ -1,218 +0,0 @@
-PACKAGE=drakxtools
-PKGVERSION:=$(shell rpm -q --qf '%{VERSION}\n' --specfile $(PACKAGE).spec|head -n 1)
-RELEASE:=$(shell rpm -q --qf '%{RELEASE}\n' --specfile $(PACKAGE).spec|head -n 1)
-TAG := $(shell echo "V$(PKGVERSION)_$(RELEASE)" | tr -- '-.' '__')
-
-include ../Makefile.config
-include Makefile.config
-
-POFILES   = $(shell ls share/po/*.po)
-MOFILES   = $(POFILES:%.po=%.mo)
-DISTFILES = *.pm $(PMS_DIRS) Makefile Makefile.config drakxtools.spec serial_probe share/po share/diskdrake.rc $(STANDALONEPMS) standalone/icons standalone/man/C/* pixmaps pixmaps/langs standalone/interactive_http rpcinfo-flushed.c share/rpmsrate standalone/convert standalone/finish-install.xsetup standalone/service_harddrake.sh
-OTHERS     = $(OTHERDIRS) $(OTHERFILES)
-OTHERDIRS  = tools/serial_probe
-OTHERFILES = tools/rpcinfo-flushed.c
-
-STAGE1 = ../mdk-stage1
-
-USE_PCMCIA := n
-ifeq ($(ARCH),i386)
-USE_PCMCIA := y
-endif
-ifeq ($(ARCH),x86_64)
-USE_PCMCIA := y
-endif
-
-.PHONY: all $(DIRS) install clean stage2 full_stage2
-
-all: list_modules.pm TAGS $(DIRS)
-
-up:
-	(cd ..; cvs up;cd -;make localsrpm;up /home/tv/rpm/SRPMS/drakxtools-$(PKGVERSION)-$(RELEASE:).src.rpm)
-
-
-xs: $(DIRS)
-
-list_modules.pm:
-	ln -sf ../kernel/list_modules.pm
-
-TAGS: $(ALLPMS)
-	@etags -o - $^ /usr/lib/perl5/*/*/MDK/Common/*.pm | ./perl2etags > $@
-
-clean:
-	for i in $(DIRS) share/po; do $(MAKE) -C $$i clean; done;:
-	rm -rf auto ../drakxtools.tar.bz2 *.bak
-	find . -name "*~" -o -name ".#*" -o -name "TAGS" -o -name "*.old" | xargs rm -f
-
-check_pms_encoding:
-	@for i in $(ALLPMS); do charset=ascii; grep -q 'use utf8' $$i && charset=utf8; iconv -f $$charset -t $$charset $$i >/dev/null || { echo "bad $$charset character in $$i"; exit 1; }; done
-
-check: check_pms_encoding
-	perl -I. -Mlang -e 'lang::check'
-
-check2:
-	perl -I. -Mkeyboard -e 'keyboard::check'
-
-localcopy: clean
-	rm -rf standalone/pixmaps
-	$(MAKE) -C ../tools clean || :
-	cd .. ; rm -rf $(PACKAGE)-$(PKGVERSION) ; cp -af perl-install $(PACKAGE)-$(PKGVERSION) ; cp -af $(OTHERS) $(PACKAGE)-$(PKGVERSION)
-	cd .. ; rm -f $(PACKAGE)-$(PKGVERSION)/c/probe.c; cp -a mdk-stage1/{log.h,pcmcia_/{probe.c,*.h}} $(PACKAGE)-$(PKGVERSION)/c/
-	cd
-	@make nuke_perl
-
-
-$(DIRS):
-	install -d auto
-	$(MAKE) -C $@
-
-test_pms:
-	perl_checker install2.pm install_steps_gtk.pm install_steps_stdio.pm partition_table/*.pm standalone/{harddrake2,diskdrake,draksec}
-
-test_pms_all:
-	perl_checker $(shell echo $(ALLPMS) | perl -pe 's!(printer|share/advertising)\S+!!g')
-
-%.mo: %.po
-	msgfmt -o $@ $<
-
-install_pms: $(DIRS)
-	[ -d $(DEST) ] || $(MISC_DEST)/mdkinst_stage2_tool $(STAGE2_DEST)
-
-	for i in `perl -ne 's/sub (\w+?)_?(\(\))? {.*/$$1/ and print' commands.pm` sync; do ln -sf commands $(DEST)/usr/bin/$$i; done
-
-	install -d $(DESTREP4PMS)
-	find $(DESTREP4PMS) -name "*.pm.gz" | xargs rm -f
-	for i in $(PMS); do \
-		dest=$(DESTREP4PMS)/`dirname $$i`; \
-		install -d $$dest; \
-		perl -ne 'print' $$i > $(DESTREP4PMS)/$$i; \
-		perl -pe 's/#[-+].*//; $$_ = "\n" if (/^=(head|begin)/ .. /^=cut/) || /use (diagnostics|strict|vars|warnings)/' $$i > $(DESTREP4PMS)/$$i; \
-	done
-
-	rm -f $(DESTREP4PMS)/{bootlook,tinyfirewall}.pm
-
-	cp share/*.rc $(DESTREP4PMS)
-	chmod a+x $(DESTREP4PMS)/install2
-	chmod a+x $(DESTREP4PMS)/commands
-
-mo_files : $(MOFILES)
-
-get_needed_files: $(DIRS) mo_files
-	REP4PMS=$(REP4PMS) ../tools/install-xml-file-list share/list.xml $(DEST)
-
-	mv -f $(DEST)/usr/{lib,X11R6/lib}/*.so* $(DEST)/lib
-	../tools/simplify-drakx-modules $(DEST)/usr/*/*/*/utf8_heavy.pl
-
-	cp -f $(STAGE1)/init-stage2 $(DEST)/etc/init
-
-	cat share/symlinks `../tools/specific_arch share/symlinks` > $(DEST)/usr/share/symlinks
-
-	perl -I. -Mlang -e 'symlink "UTF-8", "$(DEST)/usr/share/locale/$$_" foreach lang::list_langs()'
-
-	perl -ane 'symlink "$$F[1]", "$(DEST)$$F[0]"' share/aliases
-ifeq (ia64,$(ARCH))
-	ln -sf bash $(DEST)/bin/sh
-else
-	ln -sf ash $(DEST)/bin/sh
-endif
-
-	mkfontdir $(DEST)/usr/X11R6/lib/X11/fonts
-	fc-cache -f $(DEST)/usr/X11R6/lib/X11/fonts
-
-	for i in `ls ../kernel/all.kernels`; do cp -f ../kernel/all.kernels/$$i/modules.cz $(DEST)/lib/modules.cz-$$i; done
-	ls ../kernel/all.kernels | grep '^2' > $(STAGE2_DEST)/mdkinst.kernels
-
-	$(MAKE) -C share/po install SUDO= NAME=libDrakX LOCALEDIR=$(DEST)/usr/share/locale_special
-# POFILES to disable for installation:
-# be,fur: too few messages translated; 
-# ta: font problem
-	rm -rf $(DEST)/usr/share/locale_special/{be,fur,ta}
-
-ifeq (y,$(USE_PCMCIA))
-	install -s /sbin/cardmgr $(DEST)/sbin
-	cp -a /etc/pcmcia $(DEST)/etc
-	../tools/patch_pcmcia_config.pl $(DEST)/etc/pcmcia/config ../kernel/all.kernels/`cat ../kernel/RPMS/.main`/modules.dep
-endif
-
-	install -d $(MEDIA_INFO_DEST)
-	grep ChangeLog CVS/Entries > $(STAGE2_DEST)/VERSION
-
-	cd share ; cp compssUsers.pl* rpmsrate $(MEDIA_INFO_DEST)
-	clean-rpmsrate $(MEDIA_INFO_DEST)/rpmsrate $(MAIN_RPMS_DIR)
-
-full_stage2:
-	$(MAKE) stage2
-	$(MAKE) clp
-
-clp:
-	$(MISC_DEST)/mdkinst_stage2_tool $(STAGE2_DEST)
-
-stage2:
-	if [ `id -u` = 0 ]; then rm -rf $(DEST); else $(SUDO) rm -rf $(DEST); fi
-	mkdir -p $(DEST)
-	$(MAKE) get_needed_files 
-	$(MAKE) install_pms
-
-# rules to build a test rpm
-
-localrpm: localdist buildrpm
-
-localsrpm: spec_test localdist buildsrpm
-
-srpm: spec_test cvstag localsrpm
-
-localdist: cleandist localcopy tar
-
-cleandist:
-	rm -rf ../$(PACKAGE)-$(PKGVERSION) ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-spec_test:
-	@if [[ -z "$(PKGVERSION)"  ]]; then echo "unable to get spec version"; exit 3;fi
-	@if [[ -z "$(RELEASE)"  ]]; then echo "unable to get spec release"; exit 2;fi
-
-tar:
-	cd ../$(PACKAGE)-$(PKGVERSION) && perl -pi -e 's/^all: help/all:/' share/po/Makefile
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -rf install* pkgs.pm help.pm ftp.pm http.pm crypto.pm t.pm debug.log `find -name CVS`
-	cd ../$(PACKAGE)-$(PKGVERSION) && mv -f Makefile.drakxtools Makefile
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -f list_modules.pm && cp -f ../kernel/list_modules.pm .
-	cd ..; tar cfj $(PACKAGE)-$(PKGVERSION).tar.bz2 $(patsubst %,$(PACKAGE)-$(PKGVERSION)/%,$(DISTFILES))
-	cd ..; rm -rf $(PACKAGE)-$(PKGVERSION)
-
-buildrpm:
-	rpm -ta ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-buildsrpm:
-	rpm -ts --nodeps ../$(PACKAGE)-$(PKGVERSION).tar.bz2
-
-# rules to build a distributable rpm
-
-rpm: cvstag dist buildrpm
-
-slowsrpm: spec_test cvstag dist buildsrpm
-
-dist: cleandist export tar
-
-export:
-	cd ..; cvs export -d $(PACKAGE)-$(PKGVERSION) -r $(TAG) $(PACKAGE)
-	cd ../$(PACKAGE)-$(PKGVERSION) && rm -rf $(OTHERDIRS) && set -x && for f in $(OTHERDIRS); do cvs -d `cat ../CVS/Root` export -r $(TAG) -d `basename $$f` gi/$$f; done
-	cd ..; set -x && for f in $(OTHERFILES); do cvs -d `cat ../CVS/Root` export -r $(TAG) -d $(PACKAGE)-$(PKGVERSION) gi/$$f; done
-	@make nuke_perl
-
-cvstag:
-	cvs tag $(CVSTAGOPT) $(TAG)
-	cd ..; cvs tag $(CVSTAGOPT) $(TAG) $(OTHERS)
-
-nuke_perl:
-	find ../$(PACKAGE)-$(PKGVERSION) -name '*.pm' | xargs ../tools/simplify-drakx-modules
-	find ../$(PACKAGE)-$(PKGVERSION)/standalone -type f | xargs ../tools/simplify-drakx-modules
-
-dont_run_directly_stage2:
-	[ -d $(DEST) ] || $(MISC_DEST)/mdkinst_stage2_tool $(STAGE2_DEST)
-	echo -e '#!/bin/sh\n\nexec /usr/bin/busybox sh' > $(DEST)/usr/bin/runinstall2.sh
-	chmod a+x $(DEST)/usr/bin/runinstall2.sh
-	ln -sf runinstall2.sh $(DEST)/usr/bin/runinstall2
-
-trace_stage2:
-	[ -d $(DEST) ] || $(MISC_DEST)/mdkinst_stage2_tool $(STAGE2_DEST)
-	f=`perldoc -l Devel::Trace`; install -m 644 -D $$f $(DEST)$$f
-	perl -pi -e 's|(#!/usr/bin/perl).*|$$1 -d:Trace|' $(DEST)/usr/bin/runinstall2
diff --git a/perl-install/Makefile.config b/perl-install/Makefile.config
deleted file mode 100644
index 940ac2d32..000000000
--- a/perl-install/Makefile.config
+++ /dev/null
@@ -1,21 +0,0 @@
-# -*- Makefile -*-
-VERSION     = 2.2.10-BOOT                                                                             
-SUDO        = sudo
-TMPDIR      = /tmp
-SO_FILES    = c/blib/arch/auto/c/c.so                                                                 
-PMS_DIRS    = Newt Xconfig c xf86misc diskdrake harddrake interactive modules network partition_table printer resize_fat sbus_probing security fs
-PMS         = *.pm $(PMS_DIRS:%=%/*.pm) commands install2
-STANDALONEPMS_ = XFdrake adduserdrake autosetupprintqueues diskdrake drakTermServ drakautoinst drakauth drakbackup drakboot drakbug drakbug_report drakclock drakconnect drakedm drakfirewall drakfloppy drakfont drakgw drakhelp drakperm drakproxy drakpxe drakroam draksec draksound draksplash drakupdate_fstab drakups drakvpn drakxservices drakxtv fileshareset harddrake2 finish-install keyboarddrake listsupportedprinters localedrake logdrake lsnetdrake mousedrake net_applet net_monitor printerdrake scannerdrake service_harddrake service_harddrake_confirm bootloader-config
-
-STANDALONEPMS = $(STANDALONEPMS_:%=standalone/%)
-ALLPMS	    = $(PMS) $(STANDALONEPMS) share/advertising/*.pl share/compssUsers.pl*
-REP4PMS     = /usr/bin/perl-install
-ROOTDEST    = /export
-DEST        = $(STAGE2_LIVE)
-DESTREP4PMS = $(DEST)$(REP4PMS)
-PERL        = perl
-LOCALFILES  = $(patsubst %, ../tools/%,serial_probe/serial_probe xhost+)
-DIRS        = c Newt resize_fat xf86misc #po 
-CFLAGS	    = -Wall
-override CFLAGS  += -pipe
-
diff --git a/perl-install/Makefile.drakxtools b/perl-install/Makefile.drakxtools
deleted file mode 100644
index 7f4b25bd8..000000000
--- a/perl-install/Makefile.drakxtools
+++ /dev/null
@@ -1,85 +0,0 @@
-# -*- Makefile -*-
-include Makefile.config
-
-INLIBDEST_DIRS = Newt c resize_fat xf86misc sbus_probing 
-HAVEINST_DIRS = share/po standalone/interactive_http
-DIRS = $(INLIBDEST_DIRS) $(HAVEINST_DIRS) harddrake printer serial_probe
-NAME = libDrakX
-PREFIX = 
-LIBDIR = $(PREFIX)/usr/lib
-MENUDIR= $(LIBDEST)/menu
-DATADIR = $(PREFIX)/usr/share
-ICONSDIR= $(DATADIR)/icons
-BINDEST = $(PREFIX)/usr/bin
-SBINDEST = $(PREFIX)/usr/sbin
-ETCDEST = $(PREFIX)/etc/gtk
-BINX11DEST = $(PREFIX)/usr/X11R6/bin
-LIBX11DEST = $(PREFIX)/usr/X11R6/lib/X11
-LIBDEST = $(LIBDIR)/$(NAME)
-PIXDIR = $(DATADIR)/$(NAME)/pixmaps
-INITDIR =  $(PREFIX)/etc/rc.d/init.d
-.PHONY: $(DIRS)
-
-all: rpcinfo-flushed $(DIRS)
-
-$(DIRS):
-	install -d auto
-	rm -f share/po/DrakX.pot # force rebuild of po's
-	[ ! -e $@/Makefile ] || $(MAKE) -C $@
-
-install:
-	mkdir -p $(BINDEST) $(ETCDEST) $(SBINDEST) $(DATADIR)/{harddrake,pixmaps,icons/{large,mini},autostart} $(BINX11DEST) $(LIBX11DEST) $(PIXDIR) $(INITDIR) $(MENUDIR)
-	install -d $(INLIBDEST_DIRS:%=$(LIBDEST)/%)
-	install $(STANDALONEPMS) standalone/service_harddrake.sh standalone/convert $(SBINDEST)
-	install -s rpcinfo-flushed serial_probe/serial_probe $(SBINDEST)
-	ln -s ../../$(patsubst $(PREFIX)/usr%,%,$(SBINDEST))/XFdrake $(BINX11DEST)/Xdrakres
-	ln -s fileshareset $(SBINDEST)/filesharelist
-	mv -f $(SBINDEST)/lsnetdrake $(BINDEST)
-	mv -f $(SBINDEST)/drakbug $(BINDEST)
-	mv -f $(SBINDEST)/drakhelp $(BINDEST)
-	mv -f $(SBINDEST)/localedrake $(BINDEST)
-	mv -f $(SBINDEST)/net_applet $(BINDEST)
-
-	install -m 644 *.pm $(LIBDEST)
-	for i in $(PMS_DIRS); do install -d $(LIBDEST)/$$i ; install -m 644 $$i/*.pm $(LIBDEST)/$$i/;done
-	install -m 644 pixmaps/*.* $(PIXDIR)
-	install -m 644 share/diskdrake.rc $(DATADIR)/$(NAME)
-
-	install -d $(PREFIX)/etc/security
-	echo 'RESTRICT=yes' > $(PREFIX)/etc/security/fileshare.conf
-
-	install -D standalone/finish-install.xsetup $(PREFIX)/etc/X11/xsetup.d/finish-install.xsetup
-	install -d $(PREFIX)/etc/sysconfig
-	echo 'FINISH_INSTALL=yes' > $(PREFIX)/etc/sysconfig/finish-install
-
-	for i in $(HAVEINST_DIRS); do \
-		$(MAKE) -C $$i install PREFIX=$(PREFIX) SUDO= DATADIR=$(DATADIR) NAME=$(NAME) ; \
-	done
-
-	find auto -follow -name .exists -o -name "*.bs" | xargs rm -f
-	cp -rfL auto standalone/icons $(LIBDEST)
-	mv $(LIBDEST)/icons/harddrake2/menu/harddrake-menu32.png $(ICONSDIR)/harddrake.png
-	mv $(LIBDEST)/icons/harddrake2/menu/harddrake-menu48.png $(ICONSDIR)/large/harddrake.png
-	mv $(LIBDEST)/icons/harddrake2/menu/harddrake-menu16.png $(ICONSDIR)/mini/harddrake.png
-	mv $(LIBDEST)/icons/localedrake-32.png $(ICONSDIR)/localedrake.png
-	mv $(LIBDEST)/icons/localedrake-48.png $(ICONSDIR)/large/localedrake.png
-	mv $(LIBDEST)/icons/localedrake-16.png $(ICONSDIR)/mini/localedrake.png
-	rmdir $(LIBDEST)/icons/harddrake2/menu
-	mv $(LIBDEST)/icons/harddrake2/ $(DATADIR)/pixmaps/
-	mv $(SBINDEST)/service_harddrake.sh $(INITDIR)/harddrake
-	install share/rpmsrate $(DATADIR)/harddrake/
-	mv $(SBINDEST)/convert $(DATADIR)/harddrake
-	mv $(SBINDEST)/service_harddrake $(DATADIR)/harddrake/
-	ln -s {XFdrake,$(SBINDEST)/drakx11}
-	ln -s {diskdrake,$(SBINDEST)/drakdisk}
-	ln -s {drakclock,$(SBINDEST)/clock.pl}
-	ln -s {harddrake2,$(SBINDEST)/drakhardware}
-	ln -s {keyboarddrake,$(SBINDEST)/drakkeyboard}
-	ln -s {localedrake,$(BINDEST)/draklocale}
-	ln -s {logdrake,$(SBINDEST)/draklog}
-	ln -s {mousedrake,$(SBINDEST)/drakmouse}
-	ln -s {net_monitor,$(SBINDEST)/draknet_monitor}
-	ln -s {printerdrake,$(SBINDEST)/drakprinter}
-	ln -s {scannerdrake,$(SBINDEST)/drakscanner}
-	mkdir -p $(PREFIX)/usr/share/man/man{5,8}
-	for i in 5 8; do install -m 644 standalone/man/C/man$$i/* $(PREFIX)/usr/share/man/man$$i; done
diff --git a/perl-install/Newt/.cvsignore b/perl-install/Newt/.cvsignore
deleted file mode 100644
index 25fe4e1c1..000000000
--- a/perl-install/Newt/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-Newt.bs
-Newt.c
-pm_to_blib
-blib
-Makefile_c
diff --git a/perl-install/Newt/Av_CharPtrPtr.c b/perl-install/Newt/Av_CharPtrPtr.c
deleted file mode 100644
index f28fa6315..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.c
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifdef __cplusplus
-extern "C" {
-#endif
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include "Av_CharPtrPtr.h"  /* XS_*_charPtrPtr() */
-#ifdef __cplusplus
-}
-#endif
-
-
-/* Used by the INPUT typemap for char**.
- * Will convert a Perl AV* (containing strings) to a C char**.
- */
-char **
-XS_unpack_charPtrPtr( rv )
-SV *rv;
-{
-	AV *av;
-	SV **ssv;
-	char **s;
-	int avlen;
-	int x;
-
-	if( SvROK( rv ) && (SvTYPE(SvRV(rv)) == SVt_PVAV) )
-		av = (AV*)SvRV(rv);
-	else {
-		warn("XS_unpack_charPtrPtr: rv was not an AV ref");
-		return( (char**)NULL );
-	}
-
-	/* is it empty? */
-	avlen = av_len(av);
-	if( avlen < 0 ){
-		warn("XS_unpack_charPtrPtr: array was empty");
-		return( (char**)NULL );
-	}
-
-	/* av_len+2 == number of strings, plus 1 for an end-of-array sentinel.
-	 */
-	s = (char **)safemalloc( sizeof(char*) * (avlen + 2) );
-	if( s == NULL ){
-		warn("XS_unpack_charPtrPtr: unable to malloc char**");
-		return( (char**)NULL );
-	}
-	for( x = 0; x <= avlen; ++x ){
-		ssv = av_fetch( av, x, 0 );
-		if( ssv != NULL ){
-			if( SvPOK( *ssv ) ){
-				s[x] = (char *)safemalloc( SvCUR(*ssv) + 1 );
-				if( s[x] == NULL )
-					warn("XS_unpack_charPtrPtr: unable to malloc char*");
-				else
-					strcpy( s[x], SvPV( *ssv, PL_na ) );
-			}
-			else
-				warn("XS_unpack_charPtrPtr: array elem %d was not a string.", x );
-		}
-		else
-			s[x] = (char*)NULL;
-	}
-	s[x] = (char*)NULL; /* sentinel */
-	return( s );
-}
-
-/* Used by the OUTPUT typemap for char**.
- * Will convert a C char** to a Perl AV*.
- */
-void
-XS_pack_charPtrPtr( st, s )
-SV *st;
-char **s;
-{
-	AV *av = newAV();
-	SV *sv;
-	char **c;
-
-	for( c = s; *c != NULL; ++c ){
-		sv = newSVpv( *c, 0 );
-		av_push( av, sv );
-	}
-	sv = newSVrv( st, NULL );	/* upgrade stack SV to an RV */
-	SvREFCNT_dec( sv );	/* discard */
-	SvRV( st ) = (SV*)av;	/* make stack RV point at our AV */
-}
-
-
-/* cleanup the temporary char** from XS_unpack_charPtrPtr */
-void
-XS_release_charPtrPtr(s)
-char **s;
-{
-	char **c;
-	for( c = s; *c != NULL; ++c )
-		safefree( *c );
-	safefree( s );
-}
-
diff --git a/perl-install/Newt/Av_CharPtrPtr.h b/perl-install/Newt/Av_CharPtrPtr.h
deleted file mode 100644
index 765f1a731..000000000
--- a/perl-install/Newt/Av_CharPtrPtr.h
+++ /dev/null
@@ -1,4 +0,0 @@
-char ** XS_unpack_charPtrPtr _(( SV *rv ));
-void XS_pack_charPtrPtr _(( SV *st, char **s ));
-void XS_release_charPtrPtr _(( char **s ));
-
diff --git a/perl-install/Newt/Makefile b/perl-install/Newt/Makefile
deleted file mode 100644
index 613ca8a1c..000000000
--- a/perl-install/Newt/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-Newt: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH= || $(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/Newt ; ln -s ../Newt/blib/arch/auto/Newt ../auto
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o
diff --git a/perl-install/Newt/Makefile.PL b/perl-install/Newt/Makefile.PL
deleted file mode 100644
index 6378a8f31..000000000
--- a/perl-install/Newt/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
-    'NAME'	=> 'Newt',
-    'OBJECT'    => 'Av_CharPtrPtr.o Newt.o',
-    'MAKEFILE'  => 'Makefile_c',
-    'OPTIMIZE'  => '-Os',
-    'VERSION_FROM' => 'Newt.pm', # finds $VERSION
-    'LIBS'	=> ['-lnewt -lslang'],
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-);
diff --git a/perl-install/Newt/Newt.pm b/perl-install/Newt/Newt.pm
deleted file mode 100644
index 1a93f02a0..000000000
--- a/perl-install/Newt/Newt.pm
+++ /dev/null
@@ -1,20 +0,0 @@
-package Newt; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-use DynaLoader;
-
-use vars qw($VERSION @ISA);
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-Newt->bootstrap($VERSION);
-
-package Newt::Component;
-
-our @ISA = qw(); # help perl_checker
-
-package Newt::Grid;
-
-our @ISA = qw(); # help perl_checker
-
-1;
diff --git a/perl-install/Newt/Newt.xs b/perl-install/Newt/Newt.xs
deleted file mode 100644
index 7b2317cc7..000000000
--- a/perl-install/Newt/Newt.xs
+++ /dev/null
@@ -1,498 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include <newt.h>
-#include <slang/slang.h>
-
-static void suspend() {
-  newtSuspend();
-  raise(SIGTSTP);
-  newtResume();
-}
-
-static void componentCallback(newtComponent co, void *data) {
-  dSP;
-  PUSHMARK(SP);
-  perl_call_sv((SV *) data, G_DISCARD);
-}
-
-
-typedef newtComponent Newt__Component;
-typedef newtGrid Newt__Grid;
-
-
-MODULE = Newt		PACKAGE = Newt 	PREFIX = newt
-
-PROTOTYPES: DISABLE
-
-
-void
-DESTROY()
-	CODE:
-	{
-		newtFinished();
-	}
-
-int
-newtInit(setlocale)
-  int setlocale
-  CODE:
-  SLsmg_Setlocale = setlocale;
-  newtInit();
-
-int
-newtFinished()
-
-void
-newtCls()
-
-void
-newtSuspend()
-
-void
-newtResume()
-
-int
-newtCenteredWindow(width,height,title)
-	int width;
-	int height;
-	const char * title;
-
-void
-newtPopWindow()
-
-void
-newtRefresh()
-
-void
-newtPushHelpLine(text)
-	const char * text;
-
-void
-newtDrawRootText(row,col,text)
-	int row;
-	int col;
-	const char * text;
-
-void
-newtGetScreenSize()
-  PPCODE:
-{
-  int cols, rows;
-  newtGetScreenSize(&cols, &rows);
-  PUSHs(sv_2mortal(newSViv(cols)));
-  PUSHs(sv_2mortal(newSViv(rows)));
-}
-
-void
-newtSetSuspendCallback()
-	CODE:
-	{
-	  newtSetSuspendCallback(suspend, NULL);
-	}
-
-
-void
-newtWinMessage(title,buttonText,text)
-	char * title;
-	char * buttonText;
-	char * text;
-
-int
-newtWinChoice(title,button1,button2,text)
-	char * title;
-	char * button1;
-	char * button2;
-	char * text;
-
-int
-newtWinTernary(title,button1,button2,button3,message)
-	char * title;
-	char * button1;
-	char * button2;
-	char * button3;
-	char * message;
-
-MODULE = Newt		PACKAGE = Newt::Component 	PREFIX = newt
-
-void
-addCallback(co, callback)
-  Newt::Component co;
-  SV *callback;
-  CODE:
-  newtComponentAddCallback(co, componentCallback, callback);
-
-Newt::Component
-newtCompactButton(text)
-	const char * text;
-	CODE: 
-	RETVAL = newtCompactButton(-1, -1, text);
-	OUTPUT:
-	RETVAL
-
-Newt::Component
-newtButton(text)
-	const char * text;
-	CODE: 
-	RETVAL = newtButton(-1, -1, text);
-	OUTPUT:
-	RETVAL
-
-Newt::Component
-newtCheckbox(text,defValue,seq)
-	const char * text;
-	char *defValue;
-	const char * seq;
-	CODE: 
-	RETVAL = newtCheckbox(-1, -1, text, defValue[0], seq, NULL);
-	OUTPUT:
-	RETVAL
-
-int
-newtCheckboxGetValue(co)
-	Newt::Component co;
-
-void
-newtCheckboxSetValue(co, value)
-	Newt::Component co;
-	char *value;
-  CODE: 
-  newtCheckboxSetValue(co, value[0]);
-
-Newt::Component
-newtLabel(text)
-	const char * text;
-CODE:
-        RETVAL = newtLabel(-1, -1, text);
-OUTPUT:
-	RETVAL
-
-void
-newtLabelSetText(co,text)
-	Newt::Component co;
-	const char * text;
-
-Newt::Component
-newtVerticalScrollbar(height,normalColorset,thumbColorset)
-	int height;
-	int normalColorset;
-	int thumbColorset;
-CODE:
-        RETVAL = newtVerticalScrollbar(-1, -1, height,normalColorset,thumbColorset);
-OUTPUT:
-	RETVAL
-
-void
-newtScrollbarSet(co,where,total)
-	Newt::Component co;
-	int where;
-	int total;
-
-Newt::Component
-newtListbox(height,flags)
-	int height;
-	int flags;
-CODE:
-        RETVAL = newtListbox(-1, -1, height, flags);
-OUTPUT:
-	RETVAL
-
-SV *
-newtListboxGetCurrent(co)
-	Newt::Component co;
-CODE:
-        RETVAL = SvREFCNT_inc(newtListboxGetCurrent(co));
-OUTPUT:
-	RETVAL
-
-
-void
-newtListboxSetCurrent(co,indice)
-	Newt::Component co;
-	int indice;
-
-void
-newtListboxSetWidth(co,width)
-	Newt::Component co;
-	int width;
-
-int
-newtListboxAddEntry(co,text,data)
-	Newt::Component co;
-	const char * text;
-	SV * data;
-CODE:
-	RETVAL = newtListboxAddEntry(co, text, data);
-OUTPUT:
-	RETVAL
-
-
-Newt::Component
-newtTree(height,want_scroll)
-	int height;
-        int want_scroll;
-	CODE:
-	RETVAL = newtCheckboxTree(-1,-1,height, (want_scroll ? NEWT_FLAG_SCROLL : 0) | NEWT_CHECKBOXTREE_HIDE_BOX);
-	OUTPUT:
-	RETVAL
-
-int
-newtTreeAdd(co,text,data,parents)
-	Newt::Component co;
-	const char * text;
-	int data;
-        SV * parents;
-	CODE:
-        {
-	  int l[10];
-	  int i;
-	  AV *av = (AV*) SvRV(parents);
-	  for (i = 0; i <= av_len(av); i++) l[i] = SvIV(*av_fetch(av, i, 0));
-	  l[i++] = NEWT_ARG_APPEND;
-	  l[i] = NEWT_ARG_LAST;
-	  RETVAL = newtCheckboxTreeAddArray(co, text, (void *) data, 0, l);
-	}
-	OUTPUT:
-	RETVAL
-
-void
-newtTreeSetCurrent(co, data)
-	Newt::Component co;
-	int data;
-	CODE:
-	newtCheckboxTreeSetCurrent(co, (void *) data);
-
-void
-newtTreeSetWidth(co,width)
-	Newt::Component co;
-	int width;
-	CODE:
-	newtCheckboxTreeSetWidth(co, width);
-
-int
-newtTreeGetCurrent(co)
-	Newt::Component co;
-CODE:
-	RETVAL = (int) newtCheckboxTreeGetCurrent(co);
-OUTPUT:
-	RETVAL
-
-
-Newt::Component
-newtTextbox(left,top,width,height,want_scroll)
-	int left;
-	int top;
-	int width;
-	int height;
-	int want_scroll;
-	CODE: 
-	RETVAL = newtTextbox(left,top,width,height, (want_scroll ? NEWT_FLAG_SCROLL : 0) | NEWT_FLAG_WRAP);
-	OUTPUT:
-	RETVAL
-
-void
-newtTextboxSetText(co,text)
-	Newt::Component co;
-	const char * text;
-
-void
-newtTextboxSetHeight(co,height)
-	Newt::Component co;
-	int height;
-
-int
-newtTextboxGetNumLines(co)
-	Newt::Component co;
-
-char *
-newtReflowText(text,width,flexDown,flexUp,actualWidth,actualHeight)
-	char * text;
-	int width;
-	int flexDown;
-	int flexUp;
-	int * actualWidth;
-	int * actualHeight;
-
-Newt::Component
-newtForm(vertBar,help,flags)
-	Newt::Component vertBar;
-	char * help;
-	int flags;
-
-void
-newtFormSetSize(co)
-	Newt::Component co;
-
-Newt::Component
-newtFormGetCurrent(co)
-	Newt::Component co;
-
-void
-newtFormSetBackground(co,color)
-	Newt::Component co;
-	int color;
-
-void
-newtFormSetCurrent(co,subco)
-	Newt::Component co;
-	Newt::Component subco;
-
-void
-newtFormAddComponent(form,co)
-	Newt::Component form;
-	Newt::Component co;
-
-void
-newtFormAddGrid(form,grid,recurse)
-	Newt::Component form;
-	Newt::Grid grid;
-        int recurse;
-  CODE:
-  newtGridAddComponentsToForm(grid,form,recurse);
-
-void
-newtFormSetHeight(co,height)
-	Newt::Component co;
-	int height;
-
-void
-newtFormSetWidth(co,width)
-	Newt::Component co;
-	int width;
-
-Newt::Component
-newtRunForm(form)
-	Newt::Component form;
-
-void
-newtDrawForm(form)
-	Newt::Component form;
-
-Newt::Component
-newtEntry(initialValue,width,flag)
-	const char * initialValue;
-	int width;
-        int flag;
-	CODE:
-	{
-		const char *result;
-		RETVAL = newtEntry(-1, -1, initialValue,width,&result,flag);
-	}
-	OUTPUT:
-	RETVAL
-
-void
-newtEntrySet(co,value,cursorAtEnd)
-	Newt::Component co;
-	const char * value;
-	int cursorAtEnd;
-
-char *
-newtEntryGetValue(co)
-	Newt::Component co;
-
-void
-newtFormDestroy(form)
-	Newt::Component form;
-
-MODULE = Newt		PACKAGE = Newt::Grid 	PREFIX = newt
-
-Newt::Grid
-newtCreateGrid(cols,rows)
-	int cols;
-	int rows;
-
-Newt::Grid
-HCloseStacked3(c1, c2, c3)
-	Newt::Component c1;
-	Newt::Component c2;
-	Newt::Component c3;
-     CODE:
-	{
-	  RETVAL = newtGridHCloseStacked(NEWT_GRID_COMPONENT, c1, NEWT_GRID_COMPONENT, c2, NEWT_GRID_COMPONENT, c3);
-	}
-OUTPUT:
-RETVAL
-
-
-Newt::Grid
-newtGridBasicWindow(text,middle,buttons)
-	Newt::Component text;
-	Newt::Grid middle;
-	Newt::Grid buttons;
-
-
-Newt::Grid
-newtGridSimpleWindow(text,middle,buttons)
-	Newt::Component text;
-	Newt::Component middle;
-	Newt::Grid buttons;
-
-void
-newtGridSetField(grid,col,row,type,val,padLeft,padTop,padRight,padBottom,anchor,flags)
-	Newt::Grid grid;
-	int col;
-	int row;
-	enum newtGridElement type;
-	void * val;
-	int padLeft;
-	int padTop;
-	int padRight;
-	int padBottom;
-	int anchor;
-	int flags;
-
-
-void
-newtGridFree(grid,recurse)
-	Newt::Grid grid;
-	int recurse;
-
-void
-newtGridPlace(grid,left,top)
-	Newt::Grid grid;
-        int left;
-        int top;
-
-void
-newtGridGetSize(grid)
-	Newt::Grid grid;
- PPCODE:
-{
-  int width;
-  int height;
-  newtGridGetSize(grid, &width, &height);
-  PUSHs(sv_2mortal(newSViv(width)));
-  PUSHs(sv_2mortal(newSViv(height)));
-}
-
-void
-newtGridWrappedWindow(grid,title)
-	Newt::Grid grid;
-	char * title;
-	
-Newt::Grid
-newtButtonBar(button1, ...)
-	char * button1;
- PPCODE:
-	{
-	  static newtComponent p[11];
-	  int i;
-	  EXTEND(SP, items + 1);
-#define a(i) (char *)SvPV(ST(i),PL_na)
-          PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Grid", 
-	     newtButtonBar(items >  0 ? a( 0) : NULL, items >  0 ? &p[ 0] : NULL, 
-			   items >  1 ? a( 1) : NULL, items >  1 ? &p[ 1] : NULL, 
-			   items >  2 ? a( 2) : NULL, items >  2 ? &p[ 2] : NULL, 
-			   items >  3 ? a( 3) : NULL, items >  3 ? &p[ 3] : NULL, 
-			   items >  4 ? a( 4) : NULL, items >  4 ? &p[ 4] : NULL, 
-			   items >  5 ? a( 5) : NULL, items >  5 ? &p[ 5] : NULL, 
-			   items >  6 ? a( 6) : NULL, items >  6 ? &p[ 6] : NULL, 
-			   items >  7 ? a( 7) : NULL, items >  7 ? &p[ 7] : NULL, 
-			   items >  8 ? a( 8) : NULL, items >  8 ? &p[ 8] : NULL, 
-			   items >  9 ? a( 9) : NULL, items >  9 ? &p[ 9] : NULL, 
-			   items > 10 ? a(10) : NULL, items > 10 ? &p[10] : NULL,  
-			   NULL)));
-#undef a
-        for (i = 0; i < items; i++) PUSHs(sv_setref_pv(sv_newmortal(), "Newt::Component", p[i]));
-	}
diff --git a/perl-install/Newt/typemap b/perl-install/Newt/typemap
deleted file mode 100644
index 5aaa2f668..000000000
--- a/perl-install/Newt/typemap
+++ /dev/null
@@ -1,25 +0,0 @@
-TYPEMAP
-
-const char *		T_PV
-const void *		T_PV
-int *			T_PV
-void **			T_PACKED
-
-enum newtFlagsSense	T_IV
-enum newtGridElement	T_IV
-SV **			T_SV
-
-Newt::Component		NewtComponent
-Newt::Grid		NewtGrid
-
-INPUT
-NewtComponent
-	$var = ($type) SvIV((SV*)SvRV($arg))
-NewtGrid
-	$var = ($type) SvIV((SV*)SvRV($arg))
-
-OUTPUT
-NewtComponent
-	sv_setref_pv($arg, "Newt::Component", (void*) $var);
-NewtGrid
-	sv_setref_pv($arg, "Newt::Grid", (void*) $var);
diff --git a/perl-install/Xconfig/FILES b/perl-install/Xconfig/FILES
deleted file mode 100644
index f6352dedf..000000000
--- a/perl-install/Xconfig/FILES
+++ /dev/null
@@ -1,6 +0,0 @@
-       
-parse --- xfree ---- default ------------------ main 
-                \--- card -------------------/  test
-                 \-- monitor ---------------/   various
-                  \- screen ---------------/    proprietary
-                   \ resolution_and_depth-/
diff --git a/perl-install/Xconfig/card.pm b/perl-install/Xconfig/card.pm
deleted file mode 100644
index 46249de4f..000000000
--- a/perl-install/Xconfig/card.pm
+++ /dev/null
@@ -1,607 +0,0 @@
-package Xconfig::card; # $Id$
-
-use diagnostics;
-use strict;
-
-use detect_devices;
-use modules;
-use common;
-use log;
-
-
-my %VideoRams = (
-     256 => N_("256 kB"),
-     512 => N_("512 kB"),
-    1024 => N_("1 MB"),
-    2048 => N_("2 MB"),
-    4096 => N_("4 MB"),
-    8192 => N_("8 MB"),
-   16384 => N_("16 MB"),
-   32768 => N_("32 MB"),
-   65536 => N_("64 MB or more"),
-);
-
-my $lib = arch() =~ /x86_64/ ? "lib64" : "lib";
- 
-my @xfree4_Drivers = ((arch() =~ /^sparc/ ? qw(sunbw2 suncg14 suncg3 suncg6 sunffb sunleo suntcx) :
-		    qw(apm ark chips cirrus cyrix glide i128 i740 i810 imstt 
-                       mga neomagic newport nv rendition r128 radeon vesa
-                       s3 s3virge savage siliconmotion sis tdfx tga trident tseng vmware)), 
-		    qw(ati glint vga fbdev));
-
-sub from_raw_X {
-    my ($raw_X) = @_;
-
-    my $device = $raw_X->get_device or die "no card configured";
-
-    my $card = {
-	use_DRI_GLX  => eval { any { /dri/ } $raw_X->get_modules },
-	%$device,
-    };
-    add_to_card__using_Cards($card, $card->{BoardName});
-    $card;
-}
-
-sub to_raw_X {
-    my ($card, $raw_X) = @_;
-
-    my @cards = ($card, @{$card->{cards} || []});
-
-    foreach (@cards) {
-	#- Specific ATI fglrx driver default options
-	if ($_->{Driver} eq 'fglrx') {
-	    # $default_ATI_fglrx_config need to be move in proprietary ?
-	    $_->{raw_LINES} ||= default_ATI_fglrx_config();
-	}
-	if (arch() =~ /ppc/ && ($_->{Driver} eq 'r128' || $_->{Driver} eq 'radeon')) {
-	    $_->{UseFBDev} = 1;
-	}
-    }
-
-    $raw_X->set_devices(@cards);
-
-    $raw_X->get_ServerLayout->{Xinerama} = { commented => !$card->{Xinerama}, Option => 1 }
-      if defined $card->{Xinerama};
-
-    $raw_X->set_load_module('glx', !$card->{DRI_GLX_SPECIAL} && $card->{Driver2} ne 'fglrx'); #- glx for everyone, except proprietary nvidia
-    $raw_X->set_load_module('dri', $card->{use_DRI_GLX} && !$card->{DRI_GLX_SPECIAL});
-
-    # This loads the NVIDIA GLX extension module.
-    # IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE
-    # IT WILL LOAD XFree86 glx module and the server will crash.
-    $raw_X->set_load_module("/usr/X11R6/$lib/modules/extensions/libglx.so", $card->{DRI_GLX_SPECIAL}); 
-    if ($card->{Driver2} ne 'nvidia') {
-        $raw_X->set_load_module("/usr/X11R6/$lib/modules/extensions/libglx.a", 1);
-    }
-
-    $raw_X->remove_Section('DRI');
-
-    $raw_X->remove_load_module('v4l') if $card->{use_DRI_GLX} && $card->{Driver} eq 'r128';
-}
-
-sub default_ATI_fglrx_config() { our $default_ATI_fglrx_config }
-
-sub probe() {
-#-for Pixel tests
-#-    my @c = { driver => 'Card:Matrox Millennium G400 DualHead', description => 'Matrox|Millennium G400 Dual HeadCard' };
-    my @c = detect_devices::matching_driver__regexp('^(Card|Server|Driver):');
-
-    my @cards = map {
-	my @l = $_->{description} =~ /(.*?)\|(.*)/;
-	my $card = { 
-	    description => $_->{description},
-	    VendorName => $l[0], BoardName => $l[1],
-	    BusID => "PCI:$_->{pci_bus}:$_->{pci_device}:$_->{pci_function}",
-	};
-	if    ($_->{driver} =~ /Card:(.*)/)   { $card->{BoardName} = $1; add_to_card__using_Cards($card, $1) }
-	elsif ($_->{driver} =~ /Driver:(.*)/) { $card->{Driver} = $1 }
-	else { internal_error() }
-
-	$card;
-    } @c;
-
-    if (@cards >= 2 && $cards[0]{card_name} eq $cards[1]{card_name} && $cards[0]{card_name} eq 'Intel 830') {
-	shift @cards;
-    }
-    #- take a default on sparc if nothing has been found.
-    if (arch() =~ /^sparc/ && !@cards) {
-        log::l("Using probe with /proc/fb as nothing has been found!");
-	my $s = cat_("/proc/fb");
-	@cards = { server => $s =~ /Mach64/ ? "Mach64" : $s =~ /Permedia2/ ? "3DLabs" : "Sun24" };
-    }
-
-    #- disabling MULTI_HEAD when not available
-    foreach (@cards) { 
-	$_->{MULTI_HEAD} && $_->{card_name} =~ /G[24]00/ or next;
-	if ($ENV{MATROX_HAL}) {
-	    $_->{need_MATROX_HAL} = 1;
-	} else {
-	    delete $_->{MULTI_HEAD};
-	}
-    }
-
-    #- in case of only one cards, remove all BusID reference, this will avoid
-    #- need of change of it if the card is moved.
-    #- on many PPC machines, card is on-board, BusID is important, leave?
-    if (@cards == 1 && !$cards[0]{MULTI_HEAD} && arch() !~ /ppc/) {
-	delete $cards[0]{BusID};
-    }
-
-    @cards;
-}
-
-sub card_config__not_listed {
-    my ($in, $card, $options) = @_;
-
-    my $vendors_regexp = join '|', map { quotemeta } (
-        '3Dlabs',
-        'AOpen', 'ASUS', 'ATI', 'Ark Logic', 'Avance Logic',
-        'Cardex', 'Chaintech', 'Chips & Technologies', 'Cirrus Logic', 'Compaq', 'Creative Labs',
-        'Dell', 'Diamond', 'Digital',
-        'ET', 'Elsa',
-        'Genoa', 'Guillemot', 'Hercules', 'Intel', 'Leadtek',
-        'Matrox', 'Miro', 'NVIDIA', 'NeoMagic', 'Number Nine',
-        'Oak', 'Orchid',
-        'RIVA', 'Rendition Verite',
-        'S3', 'Silicon Motion', 'STB', 'SiS', 'Sun',
-        'Toshiba', 'Trident',
-        'VideoLogic',
-    );
-    my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+");
-
-    my @xf4 = grep { $options->{allowFB} || $_ ne 'fbdev' } @xfree4_Drivers;
-    my @list = (
-	(map { 'Vendor|' . $_ } keys %$cards),
-	(map { 'Xorg|' . $_ } @xf4),
-    );
-
-    my $r = exists $cards->{$card->{BoardName}} ? "Vendor|$card->{BoardName}" : 'Xorg|vesa';
-    $in->ask_from_({ title => N("X server"), 
-		     messages => N("Choose an X server"),
-		     interactive_help_id => 'configureX_card_list',
-		   },
-		   [ { val => \$r, separator => '|', list => \@list, sort => 1,
-		       format => sub { $_[0] =~ /^Vendor\|($vendors_regexp)\s*-?(.*)/ ? "Vendor|$1|$2" : 
-				       $_[0] =~ /^Vendor\|(.*)/ ? "Vendor|Other|$1" : $_[0] } } ]) or return;
-
-    log::explanations("Xconfig::card: $r manually chosen");
-
-    $r eq "Vendor|$card->{BoardName}" and return 1; #- it is unchanged, do not modify $card
-
-    my ($kind, $s) = $r =~ /(.*?)\|(.*)/;
-
-    %$card = ();
-    if ($kind eq 'Vendor') {
-	add_to_card__using_Cards($card, $s);
-    } else {
-	$card->{Driver} = $s;
-    }
-    $card->{manually_chosen} = 1;
-    1;
-}
-
-sub multi_head_choose {
-    my ($in, $auto, @cards) = @_;
-
-    my @choices = multi_head_choices('', @cards);
-
-    my $tc = $choices[0];
-    if ($auto) {
-	@choices == 1 or return;
-    } else {
-	$tc = $in->ask_from_listf(N("Multi-head configuration"),
-				  N("Your system supports multiple head configuration.
-What do you want to do?"), sub { $_[0]{text} }, \@choices) or return;
-    }
-    $tc->{code} or die internal_error();
-    return $tc->{code}();
-}
-
-sub configure_auto_install {
-    my ($raw_X, $do_pkgs, $old_X, $options) = @_;
-
-    my $card = $old_X->{card} || {};
-
-    if ($card->{card_name}) {
-	#- try to get info from given card_name
-	add_to_card__using_Cards($card, $card->{card_name});
-	if (!$card->{Driver}) {
-	    log::l("bad card_name $card->{card_name}, using probe");
-	    undef $card->{card_name};
-	}
-    }
-
-    if (!$card->{Driver}) {
-	my @cards = probe();
-	my ($choice) = multi_head_choices($old_X->{Xinerama}, @cards);
-	$card = $choice ? $choice->{code}() : do {
-	    log::explanations('no graphic card probed, try providing one using $o->{card}{Driver} or $o->{card}{card_name}. Defaulting...');
-	    { Driver => $options->{allowFB} ? 'fbdev' : 'vesa' };
-	};
-    }
-
-    my ($glx_choice) = xfree_and_glx_choices($card);
-    log::explanations("Using $glx_choice->{text}");
-    $glx_choice->{code}();
-    set_glx_restrictions($card);
-
-    install_server($card, $options, $do_pkgs);
-    if ($card->{needVideoRam} && !$card->{VideoRam}) {
-	$card->{VideoRam} = $options->{VideoRam_probed} || 4096;
-	log::explanations("argh, I need to know VideoRam! Taking " . ($options->{probed_VideoRam} ? "the probed" : "a default") . " value: VideoRam = $card->{VideoRam}");
-    }
-    to_raw_X($card, $raw_X);
-    $card;
-}
-
-sub configure {
-    my ($in, $raw_X, $do_pkgs, $auto, $options) = @_;
-
-    my @cards = probe();
-    @cards or @cards = {};
-
-    if (!$cards[0]{Driver}) {
-	if ($options->{allowFB}) {
-	    $cards[0]{Driver} = 'fbdev';
-	} elsif ($auto) {
-	    log::explanations("Xconfig::card: auto failed (unknown card and no allowFB)");
-	    return 0;
-	}
-    }
-    if (!$auto) {
-      card_config__not_listed:
-	card_config__not_listed($in, $cards[0], $options) or return;
-    }
-
-    my $card = multi_head_choose($in, $auto, @cards) or return;
-
-    xfree_and_glx_choose($in, $card, $auto) or return;
-
-    eval { install_server($card, $options, $do_pkgs) };
-    if ($@) {
-	$in->ask_warn('', N("Can not install Xorg package: %s", $@));
-	goto card_config__not_listed;
-    }
-    
-    if ($card->{needVideoRam} && !$card->{VideoRam}) {
-	if ($auto) {
-	    log::explanations("Xconfig::card: auto failed (needVideoRam)");
-	    return;
-	}
-	$card->{VideoRam} = (find { $_ <= $options->{VideoRam_probed} } reverse ikeys %VideoRams) || 4096;
-	$in->ask_from('', N("Select the memory size of your graphics card"),
-		      [ { val => \$card->{VideoRam},
-			  type => 'list',
-			  list => [ ikeys %VideoRams ],
-			  format => sub { translate($VideoRams{$_[0]}) },
-			  not_edit => !$::expert } ]) or return;
-    }
-
-    to_raw_X($card, $raw_X);
-    $card;
-}
-
-sub install_server {
-    my ($card, $options, $do_pkgs) = @_;
-
-    my $prog = "$::prefix/usr/X11R6/bin/Xorg";
-
-    my @packages;
-    push @packages, 'xorg-x11-server' if ! -x $prog;
-
-    #- additional packages to install according available card.
-    #- add XFree86-libs-DRI here if using DRI (future split of XFree86 TODO)
-    if ($card->{use_DRI_GLX}) {
-	push @packages, 'Glide_V5' if $card->{card_name} eq 'Voodoo5 (generic)';
-	push @packages, 'Glide_V3-DRI' if member($card->{card_name}, 'Voodoo3 (generic)', 'Voodoo Banshee (generic)');
-	push @packages, 'xorg-x11-glide-module' if $card->{card_name} =~ /Voodoo/;
-    }
-
-    if ($options->{freedriver}) {
-	delete $card->{Driver2};
-    }
-
-    my %proprietary_Driver2 = (
-	nvidia => [ 'nvidia-kernel', 'nvidia' ], #- using NVIDIA driver (TNT, TN2 and GeForce cards only).
-	fglrx => [ 'ati-kernel', 'ati' ], #- using ATI fglrx driver (Radeon, Fire GL cards only).
-    );
-    if (my $rpms_needed = $proprietary_Driver2{$card->{Driver2}}) {
-	if (my $proprietary_packages = $do_pkgs->check_kernel_module_packages($rpms_needed->[0], $rpms_needed->[1])) {
-	    push @packages, @$proprietary_packages;
-	}
-    }
-
-    $do_pkgs->install(@packages) if @packages;
-    -x $prog or die "server not available (should be in $prog)";
-
-    #- make sure everything is correct at this point, packages have really been installed
-    #- and driver and GLX extension is present.
-    if ($card->{Driver2} eq 'nvidia' &&
-	-e "$::prefix/usr/X11R6/$lib/modules/drivers/nvidia_drv.o" &&
-	-l "$::prefix/usr/X11R6/$lib/modules/extensions/libglx.so") {
-	log::explanations("Using specific NVIDIA driver and GLX extensions");
-	$card->{Driver} = 'nvidia';
-	$card->{DRI_GLX_SPECIAL} = 1;
-	$card->{Options}{IgnoreEDID} = 1;
-    }
-    if ($card->{Driver2} eq 'fglrx' &&
-	-e "$::prefix/usr/X11R6/$lib/modules/dri/fglrx_dri.so" &&
-	-e "$::prefix/usr/X11R6/$lib/modules/drivers/fglrx_drv.o") {
-	log::explanations("Using specific ATI fglrx and DRI drivers");
-	$card->{Driver} = 'fglrx';
-    }
-
-    libgl_config($card->{Driver});
-
-    if ($card->{need_MATROX_HAL}) {
-	require Xconfig::proprietary;
-	Xconfig::proprietary::install_matrox_hal($::prefix);
-    }
-}
-
-sub xfree_and_glx_choose {
-    my ($in, $card, $auto) = @_;
-
-    my @choices = xfree_and_glx_choices($card);
-
-    my $tc = 
-      $auto ? $choices[0] :
-	$in->ask_from_listf_raw({ title => N("Xorg configuration"), 
-				  messages => formatAlaTeX(join("\n\n\n", (grep { $_ } map { $_->{more_messages} } @choices),
-								N("Which configuration of Xorg do you want to have?"))), 
-				  interactive_help_id => 'configureX_xfree_and_glx',
-				},
-				sub { $_[0]{text} }, \@choices) or return;
-    log::explanations("Using $tc->{text}");
-    $tc->{code}();
-    set_glx_restrictions($card);
-    1;
-}
-
-sub multi_head_choices {
-    my ($want_Xinerama, @cards) = @_;
-    my @choices;
-
-    my $has_multi_head = @cards > 1 || @cards && $cards[0]{MULTI_HEAD} > 1;
-    my $disable_multi_head = any { 
-	$_->{Driver} or log::explanations("found card $_->{description} not supported by XF4, disabling multi-head support");
-	!$_->{Driver};
-    } @cards;
-
-    if ($has_multi_head && !$disable_multi_head) {
-	my $configure_multi_head = sub {
-
-	    #- special case for multi head card using only one BusID.
-	    @cards = map {
-		map_index { { Screen => $::i, %$_ } } ($_) x ($_->{MULTI_HEAD} || 1);
-	    } @cards;
-
-	    my $card = shift @cards; #- assume good default.
-	    $card->{cards} = \@cards;
-	    $card->{Xinerama} = $_[0];
-	    $card;
-	};
-	my $independent = { text => N("Configure all heads independently"), code => sub { $configure_multi_head->('') } };
-	my $xinerama    = { text => N("Use Xinerama extension"),            code => sub { $configure_multi_head->(1) } };
-	push @choices, $want_Xinerama ? ($xinerama, $independent) : ($independent, $xinerama);
-    }
-
-    foreach my $c (@cards) {
-	push @choices, { text => N("Configure only card \"%s\"%s", $c->{description}, $c->{BusID} && " ($c->{BusID})"),
-			 code => sub { $c } };
-    }
-    @choices;
-}
-
-#- Xorg version available, it would be better to parse available package and get version from it.
-sub xorg_version() { '6.8.2' }
-
-sub xfree_and_glx_choices {
-    my ($card) = @_;
-
-    my @choices = if_($card->{Driver}, { text => N("Xorg %s", xorg_version()), code => sub {} });
-
-    #- no GLX with Xinerama
-    return @choices if $card->{Xinerama};
-
-    #- ask the expert or any user on second pass user to enable or not hardware acceleration support.
-    if ($card->{DRI_GLX}) {
-	unshift @choices, { text => N("Xorg %s with 3D hardware acceleration", xorg_version()),
-			    code => sub { $card->{use_DRI_GLX} = 1 },
-			    more_messages => N("Your card can have 3D hardware acceleration support with Xorg %s.", xorg_version()),
-			  };
-    }
-
-    #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration.
-    if ($card->{DRI_GLX_EXPERIMENTAL} && $::expert) {
-	push @choices, { text => N("Xorg %s with EXPERIMENTAL 3D hardware acceleration", xorg_version()),
-			 code => sub { $card->{use_DRI_GLX} = 1 },
-			 more_messages => N("Your card can have 3D hardware acceleration support with Xorg %s,
-NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", xorg_version()),
-		       };
-    }
-    @choices;
-}
-
-sub set_glx_restrictions {
-    my ($card) = @_;
-
-    #- 3D acceleration configuration for XFree 4 using DRI, this is enabled by default
-    #- but for some there is a need to specify VideoRam (else it will not run).
-    if ($card->{use_DRI_GLX}) {
-	$card->{needVideoRam} = 1 if $card->{description} =~ /Matrox.* G[245][05]0/;
-	($card->{needVideoRam}, $card->{VideoRam}) = (1, 16384)
-	  if member($card->{card_name}, 'Intel 810', 'Intel 815');
-
-	#- hack for ATI Rage 128 card using a bttv or peripheral with PCI bus mastering exchange
-	#- AND using DRI at the same time.
-	if (member($card->{card_name}, 'ATI Rage 128', 'ATI Rage 128 TVout', 'ATI Rage 128 Mobility')) {
-	    $card->{Options}{UseCCEFor2D} = bool2text(modules::probe_category('multimedia/tv'));
-	}
-    }
-
-    #- check for Matrox G200 PCI cards, disable AGP in such cases, causes black screen else.
-    if (member($card->{card_name}, 'Matrox Millennium 200', 'Matrox Millennium 200', 'Matrox Mystique') && $card->{description} !~ /AGP/) {
-	log::explanations("disabling AGP mode for Matrox card, as it seems to be a PCI card");
-	log::explanations("this is only used for XFree 3.3.6, see /etc/X11/glx.conf");
-	substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$::prefix/etc/X11/glx.conf";
-    }
-}
-
-sub libgl_config {
-    my ($Driver) = @_;
-
-    my $dir = "$::prefix/etc/ld.so.conf.d/";
-
-    my %driver_to_libgl_config = (
-	nvidia => '.conf.nvidia',
-	fglrx => '.conf.ati',
-    );
-    my $need_to_run_ldconfig;
-    my $link = "$dir/GL.conf";
-    if (my $file = $driver_to_libgl_config{$Driver}) {
-        if (-e "$dir/$file" && readlink($link) ne $file) {
-            symlinkf($file, "$dir/GL.conf");
-            $need_to_run_ldconfig = 1;
-            log::explanations("ldconfig will be run because the GL library was enabled");
-        }
-    } elsif (-e $link) {
-	eval { rm_rf($link) };
-        $need_to_run_ldconfig = 2;
-        log::explanations("ldconfig will be run because the GL library was disabled");
-
-    }
-    system("/sbin/ldconfig") if $::isStandalone && $need_to_run_ldconfig;
-}
-
-sub add_to_card__using_Cards {
-    my ($card, $name) = @_;
-    my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+");
-    add2hash($card, $cards->{$name});
-    $card->{BoardName} = $card->{card_name};
-
-    $card;
-}
-
-#- needed for bad cards not restoring cleanly framebuffer, according to which version of Xorg are used.
-sub check_bad_card {
-    my ($card) = @_;
-    my $bad_card = $card->{BAD_FB_RESTORE};
-    $bad_card ||= $card->{Driver} eq 'i810' || $card->{Driver} eq 'fbdev';
-    $bad_card ||= member($card->{Driver}, 'nvidia', 'vmware') if !$::isStandalone; #- avoid testing during install at any price.
-
-    log::explanations("the graphics card does not like X in framebuffer") if $bad_card;
-
-    !$bad_card;
-}
-
-sub readCardsDB {
-    my ($file) = @_;
-    my ($card, %cards);
-
-    my $F = openFileMaybeCompressed($file);
-
-    my $lineno = 0;
-    my ($cmd, $val);
-    my $fs = {
-	NAME => sub {
-	    $cards{$card->{card_name}} = $card if $card;
-	    $card = { card_name => $val };
-	},
-	SEE => sub {
-	    my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
-	    add2hash($card, $c);
-	},
-        LINE => sub { $val =~ s/^\s*//; $card->{raw_LINES} .= "$val\n" },
-	CHIPSET => sub { $card->{Chipset} = $val },
-	DRIVER => sub { $card->{Driver} = $val },
-	DRIVER2 => sub { $card->{Driver2} = $val },
-	NEEDVIDEORAM => sub { $card->{needVideoRam} = 1 },
-	DRI_GLX => sub { $card->{DRI_GLX} = 1 if $card->{Driver} },
-	DRI_GLX_EXPERIMENTAL => sub { $card->{DRI_GLX_EXPERIMENTAL} = 1 if $card->{Driver} },
-	MULTI_HEAD => sub { $card->{MULTI_HEAD} = $val if $card->{Driver} },
-	BAD_FB_RESTORE => sub { $card->{BAD_FB_RESTORE} = 1 },
-	FB_TVOUT => sub { $card->{FB_TVOUT} = 1 },
-	UNSUPPORTED => sub { delete $card->{Driver} },
-
-	COMMENT => sub {},
-    };
-
-    local $_;
-    while (<$F>) { $lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-	/^END/ and do { $cards{$card->{card_name}} = $card if $card; last };
-
-	($cmd, $val) = /(\S+)\s*(.*)/ or next;
-
-	my $f = $fs->{$cmd};
-
-	$f ? $f->() : log::l("unknown line $lineno ($_)");
-    }
-    \%cards;
-}
-
-our $default_ATI_fglrx_config = <<'END';
-# === disable PnP Monitor  ===
-#Option                              "NoDDC"
-# === disable/enable XAA/DRI ===
-Option "no_accel"                   "no"
-Option "no_dri"                     "no"
-# === FireGL DDX driver module specific settings ===
-# === Screen Management ===
-Option "DesktopSetup"               "0x00000000" 
-Option "MonitorLayout"              "AUTO, AUTO"
-Option "IgnoreEDID"                 "off"
-Option "HSync2"                     "unspecified" 
-Option "VRefresh2"                  "unspecified" 
-Option "ScreenOverlap"              "0" 
-# === TV-out Management ===
-Option "NoTV"                       "yes"     
-Option "TVStandard"                 "NTSC-M"     
-Option "TVHSizeAdj"                 "0"     
-Option "TVVSizeAdj"                 "0"     
-Option "TVHPosAdj"                  "0"     
-Option "TVVPosAdj"                  "0"     
-Option "TVHStartAdj"                "0"     
-Option "TVColorAdj"                 "0"     
-Option "GammaCorrectionI"           "0x00000000"
-Option "GammaCorrectionII"          "0x00000000"
-# === OpenGL specific profiles/settings ===
-Option "Capabilities"               "0x00000000"
-# === Video Overlay for the Xv extension ===
-Option "VideoOverlay"               "on"
-# === OpenGL Overlay ===
-# Note: When OpenGL Overlay is enabled, Video Overlay
-#       will be disabled automatically
-Option "OpenGLOverlay"              "off"
-Option "CenterMode"                 "off"
-# === QBS Support ===
-Option "Stereo"                     "off"
-Option "StereoSyncEnable"           "1"
-# === Misc Options ===
-Option "UseFastTLS"                 "0"
-Option "BlockSignalsOnLock"         "on"
-Option "UseInternalAGPGART"         "no"
-Option "ForceGenericCPU"            "no"
-# === FSAA ===
-Option "FSAAScale"                  "1"
-Option "FSAADisableGamma"           "no"
-Option "FSAACustomizeMSPos"         "no"
-Option "FSAAMSPosX0"                "0.000000"
-Option "FSAAMSPosY0"                "0.000000"
-Option "FSAAMSPosX1"                "0.000000"
-Option "FSAAMSPosY1"                "0.000000"
-Option "FSAAMSPosX2"                "0.000000"
-Option "FSAAMSPosY2"                "0.000000"
-Option "FSAAMSPosX3"                "0.000000"
-Option "FSAAMSPosY3"                "0.000000"
-Option "FSAAMSPosX4"                "0.000000"
-Option "FSAAMSPosY4"                "0.000000"
-Option "FSAAMSPosX5"                "0.000000"
-Option "FSAAMSPosY5"                "0.000000"
-END
-
-1;
-
diff --git a/perl-install/Xconfig/default.pm b/perl-install/Xconfig/default.pm
deleted file mode 100644
index f41fccaf7..000000000
--- a/perl-install/Xconfig/default.pm
+++ /dev/null
@@ -1,44 +0,0 @@
-package Xconfig::default; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::xfree;
-use keyboard;
-use common;
-use mouse;
-
-
-sub configure {
-    my ($do_pkgs, $o_keyboard, $o_mouse) = @_;
-
-    my $keyboard = $o_keyboard || keyboard::read();
-    my $mouse = $o_mouse || do {
-	my $mouse = mouse::read(); 
-	add2hash($mouse, mouse::detect(modules::any_conf->read)) if !$::noauto;
-	$mouse;
-    };
-
-    my $raw_X = Xconfig::xfree->empty_config;
-
-    $raw_X->add_load_module($_) foreach qw(dbe v4l extmod type1 freetype);
-
-    config_keyboard($raw_X, $keyboard);
-    config_mouse($raw_X, $do_pkgs, $mouse);
-
-    $raw_X;
-}
-
-sub config_mouse {
-    my ($raw_X, $do_pkgs, $mouse) = @_;
-    mouse::set_xfree_conf($mouse, $raw_X);
-    mouse::various_xfree_conf($do_pkgs, $mouse);
-}
-
-sub config_keyboard {
-    my ($raw_X, $keyboard) = @_;
-    $raw_X->set_keyboard(keyboard::keyboard2full_xkb($keyboard));
-}
-
-1;
-
diff --git a/perl-install/Xconfig/main.pm b/perl-install/Xconfig/main.pm
deleted file mode 100644
index 724dc111f..000000000
--- a/perl-install/Xconfig/main.pm
+++ /dev/null
@@ -1,252 +0,0 @@
-package Xconfig::main; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::monitor;
-use Xconfig::card;
-use Xconfig::resolution_and_depth;
-use Xconfig::various;
-use Xconfig::screen;
-use Xconfig::test;
-use common;
-use any;
-
-
-sub configure_monitor {
-    my ($in) = @_;
-
-    my ($raw_X, $before) = Xconfig::xfree->read_and_prepare_write;
-    Xconfig::monitor::configure($in, $raw_X, int($raw_X->get_devices)) or return;
-    if ($raw_X->prepare_write ne $before) {
-	$raw_X->write;
-	'need_restart';
-    } else {
-	'';
-    }
-}
-
-sub configure_resolution {
-    my ($in) = @_;
-
-    my ($raw_X, $before) = Xconfig::xfree->read_and_prepare_write;
-    my $X = { 
-	card => Xconfig::card::from_raw_X($raw_X),
-	monitors => [ $raw_X->get_monitors ],
-    };
-    $X->{resolution} = Xconfig::resolution_and_depth::configure($in, $raw_X, $X->{card}, $X->{monitors}) or return;
-    if ($raw_X->prepare_write ne $before) {
-	&write($raw_X, $X);
-    } else {
-	'';
-    }
-}
-
-
-sub configure_everything_auto_install {
-    my ($raw_X, $do_pkgs, $old_X, $options) = @_;
-    my $X = {};
-    $X->{monitors} = Xconfig::monitor::configure_auto_install($raw_X, $old_X) or return;
-    $options->{VideoRam_probed} = $X->{monitors}[0]{VideoRam_probed};
-    $X->{card} = Xconfig::card::configure_auto_install($raw_X, $do_pkgs, $old_X, $options) or return;
-    Xconfig::screen::configure($raw_X) or return;
-    $X->{resolution} = Xconfig::resolution_and_depth::configure_auto_install($raw_X, $X->{card}, $X->{monitors}, $old_X);
-
-    my $action = &write($raw_X, $X);
-
-    Xconfig::various::runlevel(exists $old_X->{xdm} && !$old_X->{xdm} ? 3 : 5);
-
-    $action;
-}
-
-sub configure_everything {
-    my ($in, $raw_X, $do_pkgs, $auto, $options) = @_;
-    my $X = {};
-    my $ok = 1;
-
-    my $probed_info = Xconfig::monitor::probe($raw_X->get_Driver);
-    $options->{VideoRam_probed} = $probed_info->{VideoRam_probed};
-    $ok &&= $X->{card} = Xconfig::card::configure($in, $raw_X, $do_pkgs, $auto, $options);
-    $ok &&= $X->{monitors} = Xconfig::monitor::configure($in, $raw_X, int($raw_X->get_devices), $probed_info, $auto);
-    $ok &&= Xconfig::screen::configure($raw_X);
-    $ok &&= $X->{resolution} = Xconfig::resolution_and_depth::configure($in, $raw_X, $X->{card}, $X->{monitors}, $auto);
-    $ok &&= Xconfig::test::test($in, $raw_X, $X->{card}, '', 'skip_badcard') if !$auto;
-
-    if (!$ok) {
-	return if $auto;
-	($ok) = configure_chooser_raw($in, $raw_X, $do_pkgs, $options, $X, 1);
-    }
-    $X->{various} ||= Xconfig::various::various($in, $X->{card}, $options, $auto);
-
-    may_write($in, $raw_X, $X, $ok);
-}
-
-sub configure_chooser_raw {
-    my ($in, $raw_X, $do_pkgs, $options, $X, $b_modified) = @_;
-
-    my %texts;
-
-    my $update_texts = sub {
-	$texts{card} = $X->{card} && $X->{card}{BoardName} || N("Custom");
-	$texts{monitors} = $X->{monitors} && $X->{monitors}[0]{ModelName} || N("Custom");
-	$texts{resolution} = Xconfig::resolution_and_depth::to_string($X->{resolution});
-
-	$texts{$_} =~ s/(.{20}).*/$1.../ foreach keys %texts; #- ensure not too long
-    };
-    $update_texts->();
-
-    my $may_set = sub {
-	my ($field, $val) = @_;
-	if ($val) {
-	    $X->{$field} = $val;
-	    $X->{"modified_$field"} = 1;
-	    $b_modified = 1;
-	    $update_texts->();
-
-	    if (member($field, 'card', 'monitors')) {
-		Xconfig::screen::configure($raw_X);
-		$raw_X->set_resolution($X->{resolution}) if $X->{resolution};
-	    }
-	}
-    };
-
-    my $ok;
-    $in->ask_from_({ interactive_help_id => 'configureX_chooser',
-		     if_($::isStandalone, ok => N("Quit")) }, 
-		   [
-		    { label => N("Graphic Card"), val => \$texts{card}, clicked => sub { 
-			  $may_set->('card', Xconfig::card::configure($in, $raw_X, $do_pkgs, 0, $options));
-		      } },
-		    { label => N("Monitor"), val => \$texts{monitors}, clicked => sub { 
-			  $may_set->('monitors', Xconfig::monitor::configure($in, $raw_X, int($raw_X->get_devices)));
-		      } },
-		    { label => N("Resolution"), val => \$texts{resolution}, disabled => sub { !$X->{card} || !$X->{monitors} },
-		      clicked => sub {
-			  $may_set->('resolution', Xconfig::resolution_and_depth::configure($in, $raw_X, $X->{card}, $X->{monitors}));
-		      } },
-		        if_(Xconfig::card::check_bad_card($X->{card}) || $::isStandalone,
-		     { val => N("Test"), disabled => sub { !$X->{card} || !$X->{monitors} },
-		       clicked => sub { 
-			  $ok = Xconfig::test::test($in, $raw_X, $X->{card}, 'auto', 0);
-		      } },
-			),
-		    { val => N("Options"), clicked => sub {
-			  Xconfig::various::various($in, $X->{card}, $options);
-			  $X->{various} = 'done';
-		      } },
-		   ]);
-    $ok, $b_modified;
-}
-
-sub configure_chooser {
-    my ($in, $raw_X, $do_pkgs, $options) = @_;
-
-    my $X = {
-	card => scalar eval { Xconfig::card::from_raw_X($raw_X) },
-	monitors => [ $raw_X->get_monitors ],
-	resolution => scalar eval { $raw_X->get_resolution },
-    };
-    my $before = $raw_X->prepare_write;
-    my ($ok) = configure_chooser_raw($in, $raw_X, $do_pkgs, $options, $X);
-
-    if ($raw_X->prepare_write ne $before) {
-	may_write($in, $raw_X, $X, $ok);
-    } else {
-	'';
-    }
-}
-
-sub configure_everything_or_configure_chooser {
-    my ($in, $options, $auto, $o_keyboard, $o_mouse) = @_;
-
-    my $raw_X = eval { Xconfig::xfree->read };
-    my $err = $@ && formatError($@);
-    $err ||= check_valid($raw_X) if $raw_X && @$raw_X; #- that's ok if config is empty
-    if ($err) {
-	log::l("ERROR: bad X config file (error: $err)");
-	$in->ask_okcancel('',
-			  N("Your Xorg configuration file is broken, we will ignore it.")) or return;
-	$raw_X = [];
-    }
-
-    my $rc = 'ok';
-    if (is_empty_array_ref($raw_X)) {
-	$raw_X = Xconfig::default::configure($in->do_pkgs, $o_keyboard, $o_mouse);
-	$rc = Xconfig::main::configure_everything($in, $raw_X, $in->do_pkgs, $auto, $options);
-    } elsif (!$auto) {
-	$rc = Xconfig::main::configure_chooser($in, $raw_X, $in->do_pkgs, $options);
-    }
-    $rc && $raw_X, $rc;
-}
-
-
-sub may_write {
-    my ($in, $raw_X, $X, $ok) = @_;
-
-    $ok ||= $in->ask_yesorno('', N("Keep the changes?
-The current configuration is:
-
-%s", Xconfig::various::info($raw_X, $X->{card})), 1);
-
-    $ok && &write($raw_X, $X);
-}
-
-sub write {
-    my ($raw_X, $X) = @_;
-    export_to_install_X($X) if $::isInstall;
-    $raw_X->write;
-    Xconfig::various::check_XF86Config_symlink();
-    symlinkf "../../usr/X11R6/bin/Xorg", "$::prefix/etc/X11/X";
-    if ($X->{resolution}{bios}) {
-	Xconfig::various::setupFB($X->{resolution}{bios});
-	'need_reboot';
-    } else {
-	'need_restart';
-    }
-}
-
-
-sub export_to_install_X {
-    my ($X) = @_;
-
-    $::o->{X}{resolution_wanted} = $X->{resolution}{X};
-    $::o->{X}{default_depth} = $X->{resolution}{Depth};
-    $::o->{X}{bios_vga_mode} = $X->{resolution}{bios};
-    $::o->{X}{monitors} = $X->{monitors} if $X->{monitors}[0]{manually_chosen} && $X->{monitors}[0]{vendor} ne "Plug'n Play";
-    $::o->{X}{card} = $X->{card} if $X->{card}{manually_chosen};
-    $::o->{X}{Xinerama} = 1 if $X->{card}{Xinerama};
-}
-
-sub check_valid {
-    my ($raw_X) = @_;
-
-    my %sections = map { 
-	my @l = $raw_X->get_Sections($_) or return "missing section $_";
-	$_ => \@l;
-    } qw(Files InputDevice Monitor Device Screen ServerLayout);
-
-    $sections{Files}[0]{FontPath} or return "missing FontPath";
-
-    '';
-}
-
-#- most usefull XFree86-4.0.1 server options. Default values is the first ones.
-our @options_serverflags = (
-			'DontZap'                 => [ "Off", "On" ],
-			'DontZoom'                => [ "Off", "On" ],
-			'DisableVidModeExtension' => [ "Off", "On" ],
-			'AllowNonLocalXvidtune'   => [ "Off", "On" ],
-			'DisableModInDev'         => [ "Off", "On" ],
-			'AllowNonLocalModInDev'   => [ "Off", "On" ],
-			'AllowMouseOpenFail'      => [ "False", "True" ],
-			'VTSysReq'                => [ "Off", "On" ],
-			'BlankTime'               => [ "10", "5", "3", "15", "30" ],
-			'StandByTime'             => [ "20", "10", "6", "30", "60" ],
-			'SuspendTime'             => [ "30", "15", "9", "45", "90" ],
-			'OffTime'                 => [ "40", "20", "12", "60", "120" ],
-			'Pixmap'                  => [ "32", "24" ],
-			'PC98'                    => [ "auto-detected", "False", "True" ],
-			'NoPM'                    => [ "False", "True" ],
-);
-
-1;
diff --git a/perl-install/Xconfig/monitor.pm b/perl-install/Xconfig/monitor.pm
deleted file mode 100644
index 251f384c8..000000000
--- a/perl-install/Xconfig/monitor.pm
+++ /dev/null
@@ -1,277 +0,0 @@
-package Xconfig::monitor; #- $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::xfree;
-use detect_devices;
-use common;
-use any;
-use log;
-
-
-sub good_default_monitor() {
-  is_xbox() ? 'Generic|640x480 @ 60 Hz' :
-    arch() =~ /ppc/ ? 
-      (detect_devices::get_mac_model() =~ /^iBook/ ? 'Apple|iBook 800x600' : 'Apple|iMac/PowerBook 1024x768') :
-      (detect_devices::isLaptop() ? 'Generic|Flat Panel 1024x768' : 'Generic|1024x768 @ 70 Hz');
-}
-
-my @VertRefresh_ranges = ("50-70", "50-90", "50-100", "40-150");
-
-my @HorizSync_ranges = (
-	"31.5",
-	"31.5-35.1",
-	"31.5-37.9",
-	"31.5-48.5",
-	"31.5-57.0",
-	"31.5-64.3",
-	"31.5-79.0",
-	"31.5-82.0",
-	"31.5-88.0",
-	"31.5-94.0",
-);
-
-sub configure {
-    my ($in, $raw_X, $nb_monitors, $o_probed_info, $b_auto) = @_;
-
-    my $monitors = [ $raw_X->get_or_new_monitors($nb_monitors) ];
-    if ($o_probed_info) {
-	put_in_hash($monitors->[0], $o_probed_info);
-    }
-    my $head_nb = 1;
-    foreach my $monitor (@$monitors) {
-	choose($in, $monitor, @$monitors > 1 ? $head_nb++ : 0, $raw_X->get_Driver, $b_auto) or return;
-    }
-    $raw_X->set_monitors(@$monitors);
-    $monitors;
-}
-
-sub configure_auto_install {
-    my ($raw_X, $old_X) = @_;
-
-    if ($old_X->{monitor}) {
-	#- keep compatibility
-	$old_X->{monitor}{VertRefresh} = $old_X->{monitor}{vsyncrange};
-	$old_X->{monitor}{HorizSync} = $old_X->{monitor}{hsyncrange};
-
-	#- new name
-	$old_X->{monitors} = [ delete $old_X->{monitor} ];
-    }
-
-    my $monitors = [ $raw_X->get_or_new_monitors($old_X->{monitors} ? int @{$old_X->{monitors}} : 1) ];
-    mapn {
-	my ($monitor, $auto_install_monitor) = @_;
-	put_in_hash($monitor, $auto_install_monitor);
-	configure_automatic($monitor);
-    } $monitors, $old_X->{monitors} if $old_X->{monitors};
-
-    if (!is_valid($monitors->[0])) {
-	put_in_hash($monitors->[0], probe($old_X->{card}{Driver}));
-    }
-
-    foreach my $monitor (@$monitors) {
-	if (!is_valid($monitor)) {
-	    good_default_monitor() =~ /(.*)\|(.*)/ or internal_error("bad good_default_monitor");
-	    put_in_hash($monitor, { VendorName => $1, ModelName => $2 });
-	    configure_automatic($monitor) or internal_error("good_default_monitor (" . good_default_monitor()  . ") is unknown in MonitorsDB");
-	}
-    }
-    $raw_X->set_monitors(@$monitors);
-    $monitors;
-}
-
-sub choose {
-    my ($in, $monitor, $head_nb, $card_Driver, $b_auto) = @_;
-
-    my $ok = is_valid($monitor);
-    if ($b_auto) {
-	log::l("Xconfig::monitor: auto failed") if !$ok;
-	return $ok;
-    }
-
-    my %h_monitors = map { ("$_->{VendorName}|$_->{ModelName}" => $_) } monitors_db();
-
-  ask_monitor:
-    my $merged_name = do {
-	if ($monitor->{VendorName} eq "Plug'n Play") {
-	    $monitor->{VendorName};
-	} else {
-	    my $merged_name = $monitor->{VendorName} . '|' . $monitor->{ModelName};
-
-	    if (!exists $h_monitors{$merged_name}) {
-		$merged_name = is_valid($monitor) ? 'Custom' : good_default_monitor();
-	    } else {
-		$merged_name;
-	    }
-	}
-    };
-
-    $in->ask_from_({ title => N("Monitor"),
-		     messages => $head_nb ? N("Choose a monitor for head #%d", $head_nb) : N("Choose a monitor"), 
-		     interactive_help_id => 'configureX_monitor' 
-		   },
-		  [ { val => \$merged_name, separator => '|', 
-		      list => ['Custom', "Plug'n Play", sort keys %h_monitors],
-		      format => sub { $_[0] eq 'Custom' ? N("Custom") : 
-				      $_[0] eq "Plug'n Play" ? N("Plug'n Play") . ($monitor->{VendorName} eq "Plug'n Play" ? " ($monitor->{ModelName})" : '') :
-				      $_[0] =~ /^Generic\|(.*)/ ? N("Generic") . "|$1" :  
-				      N("Vendor") . "|$_[0]" },
-		      sort => 0 } ]) or return;
-
-    if ($merged_name eq "Plug'n Play") {
-	local $::noauto = 0; #- hey, you asked for plug'n play, so i do probe!
-	delete @$monitor{'VendorName', 'ModelName', 'EISA_ID'};
-	if ($head_nb <= 1) {
-	    if (my $probed_info = probe($card_Driver)) {
-		put_in_hash($monitor, $probed_info);
-	    } else {
-		$in->ask_warn('', N("Plug'n Play probing failed. Please select the correct monitor"));
-		goto ask_monitor;
-	    }
-	} else {
-	    $monitor->{VendorName} = "Plug'n Play";
-	}
-    } elsif ($merged_name eq 'Custom') {
-	$in->ask_from('',
-N("The two critical parameters are the vertical refresh rate, which is the rate
-at which the whole screen is refreshed, and most importantly the horizontal
-sync rate, which is the rate at which scanlines are displayed.
-
-It is VERY IMPORTANT that you do not specify a monitor type with a sync range
-that is beyond the capabilities of your monitor: you may damage your monitor.
- If in doubt, choose a conservative setting."),
-		      [ { val => \$monitor->{HorizSync}, list => \@HorizSync_ranges, label => N("Horizontal refresh rate"), not_edit => 0 },
-			{ val => \$monitor->{VertRefresh}, list => \@VertRefresh_ranges, label => N("Vertical refresh rate"), not_edit => 0 } ]) or goto &choose;
-	delete @$monitor{'VendorName', 'ModelName', 'EISA_ID'};
-    } else {
-	put_in_hash($monitor, $h_monitors{$merged_name});
-    }
-    $monitor->{manually_chosen} = 1;
-    1;
-}
-
-sub configure_automatic {
-    my ($monitor) = @_;
-
-    if ($monitor->{EISA_ID}) {
-	log::l("EISA_ID: $monitor->{EISA_ID}");
-	if (my $mon = find { lc($_->{EISA_ID}) eq $monitor->{EISA_ID} } monitors_db()) {
-	    add2hash($monitor, $mon);
-	    log::l("EISA_ID corresponds to: $monitor->{ModelName}");
-	} elsif (!is_valid($monitor)) {
-	    log::l("unknown EISA_ID and partial DDC probe, so unknown monitor");
-	    delete @$monitor{'VendorName', 'ModelName', 'EISA_ID'};	    
-	}
-    } elsif ($monitor->{VendorName}) {
-	if (my $mon = find { $_->{VendorName} eq $monitor->{VendorName} && $_->{ModelName} eq $monitor->{ModelName} } monitors_db()) {
-	    put_in_hash($monitor, $mon);
-	}
-    }
-    is_valid($monitor);
-}
-
-sub is_valid {
-    my ($monitor) = @_;
-    $monitor->{HorizSync} && $monitor->{VertRefresh};
-}
-
-sub probe {
-    my ($o_card_Driver) = @_;
-    probe_DDC() || probe_DMI() || probe_using_X($o_card_Driver);
-}
-
-sub probe_DDC() {
-    my ($edid, $vbe) = any::monitor_full_edid() or return;
-    my $monitor = eval($edid);
-
-    if ($vbe =~ /Memory: (\d+)k/) {
-	$monitor->{VideoRam_probed} = $1;
-    }
-    $monitor->{ModeLine} = Xconfig::xfree::default_ModeLine();
-    my $detailed_timings = $monitor->{detailed_timings} || [];
-    foreach (grep { !$_->{bad_ratio} } @$detailed_timings) {
-	my $ratio = $_->{horizontal_active} / $_->{vertical_active};
-
-	if (abs($ratio - 4 / 3) < 0.01) {
-	    #- we don't want the 4/3 modelines otherwise they conflict with the Xorg builtin vesamodes
-	} else {
-	    unshift @{$monitor->{ModeLine}},
-	      { val => $_->{ModeLine}, pre_comment => $_->{ModeLine_comment} . "\n" };
-	}
-
-	if (@$detailed_timings == 1) {
-	    #- should we care about {has_preferred_timing} ?
-	    $monitor->{preferred_resolution} = { X => $_->{horizontal_active}, Y => $_->{vertical_active} };
-	}
-    }
-
-    if ($monitor->{EISA_ID}) {
-	$monitor->{VendorName} = "Plug'n Play";
-	$monitor->{ModelName} = $monitor->{monitor_name};
-    }
-    configure_automatic($monitor) or return;
-    $monitor;
-}
-
-sub probe_using_X {
-    my ($card_Driver) = @_;
-
-    detect_devices::isLaptop() or return;
-
-    $card_Driver ||= do {
-	require Xconfig::card;
-	my @cards = Xconfig::card::probe();
-	$cards[0]{Driver};
-    } or return;
-
-    my $resolution = run_program::rooted_get_stdout($::prefix, 'monitor-probe-using-X', $card_Driver) or return;
-    generic_flat_panel(chomp_($resolution));
-}
-
-sub probe_DMI() {
-    my ($res) = my @res = uniq(map { if_($_->{driver} =~ /^Resolution:(.*)/, $1) } detect_devices::probeall()) or return;
-    if (@res > 1) {
-	log::l("oops, more than one resolution from DMI and pci probe: ", join(' ', @res));
-    }
-    generic_flat_panel($res);
-}
-
-sub generic_flat_panel {
-    my ($resolution) = @_;
-    my ($X, $Y) = $resolution =~ /(\d+)x(\d+)/ or log::l("bad resolution $resolution"), return;
-    {
-	VendorName => 'Generic',
-	ModelName => "Flat Panel $resolution",
-	HorizSync => '31.5-100', VertRefresh => '60',
-	preferred_resolution => { X => $X, Y => $Y },
-    };
-}
-
-my $monitors_db;
-sub monitors_db() {
-    $monitors_db ||= readMonitorsDB("$ENV{SHARE_PATH}/ldetect-lst/MonitorsDB");
-    @$monitors_db;
-}
-sub readMonitorsDB {
-    my ($file) = @_;
-
-    my @monitors_db;
-    my $F = openFileMaybeCompressed($file);
-    local $_;
-    my $lineno = 0; while (<$F>) {
-	$lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-
-	my @fields = qw(VendorName ModelName EISA_ID HorizSync VertRefresh dpms);
-	my %l; @l{@fields} = split /\s*;\s*/;
-	push @monitors_db, \%l;
-    }
-    \@monitors_db;
-}
-
-
-1;
-
diff --git a/perl-install/Xconfig/parse.pm b/perl-install/Xconfig/parse.pm
deleted file mode 100644
index 609534b54..000000000
--- a/perl-install/Xconfig/parse.pm
+++ /dev/null
@@ -1,205 +0,0 @@
-package Xconfig::parse; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-
-sub read_XF86Config {
-    my ($file) = @_;
-    my $raw_X = raw_from_file($file);
-    from_raw(@$raw_X);
-    $raw_X;
-}
-
-sub prepare_write_XF86Config {
-    my ($raw_X) = @_;
-    map { raw_to_string(before_to_string({ %$_ }, 0)) } @$raw_X;
-}
-
-sub write_XF86Config {
-    my ($raw_X, $file) = @_;
-    my @blocks = prepare_write_XF86Config($raw_X);
-    @blocks ? output($file, @blocks) : unlink $file;
-}
-
-sub read_XF86Config_from_string {
-    my ($s) = @_;
-    my $raw_X = raw_from_file('-', [ split "\n", $s ]);
-    from_raw(@$raw_X);
-    $raw_X;
-}
-
-#-###############################################################################
-#- raw reading/saving
-#-###############################################################################
-sub raw_from_file { #- internal
-    my ($file, $o_lines) = @_;
-    my $raw_X = [];
-
-    my $lines = $o_lines || [ cat_($file) ];
-    my $line;
-
-    my ($comment, $obj, @objs);
-
-    my $attach_comment = sub {
-	$obj || @objs or warn "$file:$line: can not attach comment\n";
-	if ($comment) {
-	    $comment =~ s/\n+$/\n/;
-	    ($obj || $objs[0])->{$_[0] . '_comment'} = $comment;
-	    $comment = '';
-	}
-    };
-
-    foreach (@$lines) {
-	$line++;
-	s/^\s*//; s/\s*$//;
-
-	if (/^$/) {
-	    $comment .= "\n" if $comment;
-	    next;
-	} elsif (@objs ? m/^#\W/ || /^#$/ : /^#/) {
-	    s/^#\s+/# /;
-	    $comment .= "$_\n";
-	    next;
-	}
-
-	if (/^Section\s+"(.*)"/i) {
-	    die "$file:$line: missing EndSection\n" if @objs;
-	    my $e = { name => $1, l => [], kind => 'Section' };
-	    push @$raw_X, $e;
-	    unshift @objs, $e; $obj = '';
-	    $attach_comment->('pre');
-	} elsif (/^Subsection\s+"(.*)"/i) {
-	    die "$file:$line: missing EndSubsection\n" if  @objs && $objs[0]{kind} eq 'Subsection';
-	    die "$file:$line: not in Section\n"        if !@objs || $objs[0]{kind} ne 'Section';
-	    my $e = { name => $1, l => [], kind => 'Subsection' };
-	    push @{$objs[0]{l}}, $e;
-	    unshift @objs, $e; $obj = '';
-	    $attach_comment->('pre');
-	} elsif (/^EndSection/i) {
-	    die "$file:$line: not in Section\n"        if !@objs || $objs[0]{kind} ne 'Section';
-	    $attach_comment->('post');
-	    shift @objs; $obj = '';
-	} elsif (/^EndSubsection/i) {
-	    die "$file:$line: not in Subsection\n"     if !@objs || $objs[0]{kind} ne 'Subsection';
-	    $attach_comment->('post');
-	    shift @objs; $obj = '';
-	} else {
-	    die "$file:$line: not in Section\n" if !@objs;
-
-	    my $commented = s/^#//;
-
-	    my $comment_on_line;
-	    s/(\s*#.*)/$comment_on_line = $1; ''/e;
-
-	    if (/^$/) {
-		die "$file:$line: weird";
-	    }
-
-	    (my $name, my $Option, $_)  = 
- 	      /^Option\s*"(.*?)"(.*)/ ? ($1, 1, $2) : /^(\S+)(.*)/ ? ($1, 0, $2) : internal_error($_);
-	    my ($val) = /(\S.*)/;
-
-	    my %e = (Option => $Option, commented => $commented, comment_on_line => $comment_on_line, pre_comment => $comment);
-	    $comment = '';
-	    $obj = { name => $name, val => $val };
-	    $e{$_} and $obj->{$_} = $e{$_} foreach keys %e;
-
-	    push @{$objs[0]{l}}, $obj;
-	}
-    }
-    $raw_X;
-}
-
-sub raw_to_string {
-    my ($e, $b_want_spacing) = @_;
-    my $s = do {
-	if ($e->{l}) {
-	    my $inside = join('', map_index { raw_to_string($_, $::i) } @{$e->{l}});
-	    $inside .= $e->{post_comment} || '';
-	    $inside =~ s/^/    /mg;
-	    qq(\n$e->{kind} "$e->{name}"\n) . $inside . "End$e->{kind}";
-	} else {
-	    ($e->{commented} ? '#' : '') .
-	      ($e->{Option} ? qq(Option "$e->{name}") : $e->{name}) .
-	      (defined $e->{val} ? ($e->{Option} && $e->{val} !~ /^"/ ? qq( "$e->{val}") : qq( $e->{val})) : '');
-	}
-    };
-    ($e->{pre_comment} ? ($b_want_spacing ? "\n" : '') . $e->{pre_comment} : '') . $s . ($e->{comment_on_line} || '') . "\n" . (!$e->{l} && $e->{post_comment} || '');
-}
-
-#-###############################################################################
-#- refine the data structure for easier use
-#-###############################################################################
-my %kind_names = (
-    Pointer  => [ qw(Protocol Device Emulate3Buttons Emulate3Timeout EmulateWheel EmulateWheelButton) ],
-    Mouse    => [ qw(DeviceName Protocol Device AlwaysCore Emulate3Buttons Emulate3Timeout EmulateWheel EmulateWheelButton) ], # Subsection in XInput
-    Keyboard => [ qw(Protocol Driver XkbModel XkbLayout XkbDisable) ],
-    Monitor  => [ qw(Identifier VendorName ModelName HorizSync VertRefresh) ],
-    Device   => [ qw(Identifier VendorName BoardName Chipset Driver VideoRam Screen BusID DPMS power_saver) ],
-    Display  => [ qw(Depth Modes Virtual) ], # Subsection in Device
-    Screen   => [ qw(Identifier Driver Device Monitor DefaultColorDepth) ],
-    InputDevice => [ qw(Identifier Driver Protocol Device Type Mode XkbModel XkbLayout XkbDisable Emulate3Buttons Emulate3Timeout EmulateWheel EmulateWheelButton) ],
-    WacomCursor => [ qw(Port) ], #-\
-    WacomStylus => [ qw(Port) ], #--> Port must be first
-    WacomEraser => [ qw(Port) ], #-/
-    ServerLayout => [ qw(Identifier) ],
-);
-my @want_string = qw(Identifier DeviceName VendorName ModelName BoardName Driver Device Chipset Monitor Protocol XkbModel XkbLayout XkbOptions XkbCompat Load BusID);
-
-%kind_names = map_each { lc $::a => [ map { lc } @$::b ] } %kind_names;
-@want_string = map { lc } @want_string;
-
-sub from_raw {
-    sub from_raw__rec {
-	my ($current, $e) = @_;
-	if ($e->{l}) {
-	    from_raw($e);
-	    push @{$current->{l}{$e->{name}}}, $e;
-	} else {
-	    if (member(lc $e->{name}, @want_string)) {
-		$e->{val} =~ s/^"(.*)"$/$1/ or warn "$e->{name} $e->{val} has no quote\n";
-	    }
-
-	    if (member(lc $e->{name}, @{$kind_names{lc $current->{name}} || []})) {
-		if ($current->{l}{$e->{name}} && !$current->{l}{$e->{name}}{commented}) {
-		    warn "skipping conflicting line for $e->{name} in $current->{name}\n" if !$e->{commented};
-		} else {
-		    $current->{l}{$e->{name}} = $e;
-		}
-	    } else {
-		push @{$current->{l}{$e->{name}}}, $e;
-	    }
-	}
-	delete $e->{name};
-    }
-
-    foreach my $e (@_) {
-	($e->{l}, my $l) = ({}, $e->{l});
-	from_raw__rec($e, $_) foreach @$l;
-
-	delete $e->{kind};
-    }
-}
-
-sub before_to_string {
-    my ($e, $depth) = @_;
-
-    if ($e->{l}) {
-	$e->{kind} = $depth ? 'Subsection' : 'Section';
-
-	my %rated = map_index { $_ => $::i + 1 } @{$kind_names{lc $e->{name}} || []};
-	my @sorted = sort { ($rated{lc $a} || 99) <=> ($rated{lc $b} || 99) } keys %{$e->{l}};
-	$e->{l} = [ map {		  
-	    my $name = $_;
-	    map { 
-		before_to_string({ name => $name, %$_ }, $depth+1);
-	    } deref_array($e->{l}{$name});
-	} @sorted ];
-    } elsif (member(lc $e->{name}, @want_string)) {
-	$e->{val} = qq("$e->{val}");
-    }
-    $e;
-}
diff --git a/perl-install/Xconfig/proprietary.pm b/perl-install/Xconfig/proprietary.pm
deleted file mode 100644
index ed196deb7..000000000
--- a/perl-install/Xconfig/proprietary.pm
+++ /dev/null
@@ -1,35 +0,0 @@
-package Xconfig::proprietary; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-
-sub install_matrox_hal {
-    my ($prefix) = @_;
-    my $tmpdir = "$prefix/root/tmp";
-
-    my $tar = "mgadrivers-2.0.tgz";
-    my $dir_in_tar = "mgadrivers";
-    my $dest_dir = "$prefix/usr/X11R6/lib/modules/drivers";
-
-    #- already installed
-    return if -e "$dest_dir/mga_hal_drv.o" || $::testing;
-
-    system("wget -O $tmpdir/$tar ftp://ftp.matrox.com/pub/mga/archive/linux/2002/$tar") if !-e "$tmpdir/$tar";
-    system("tar xzC $tmpdir -f $tmpdir/$tar");
-
-    my $src_dir = "$tmpdir/$dir_in_tar/xfree86/4.2.1/drivers";
-    foreach (all($src_dir)) {
-	my $src = "$src_dir/$_";
-	my $dest = "$dest_dir/$_";
-	rename $dest, "$dest.non_hal";
-	cp_af($src, $dest_dir);
-    }
-    rm_rf("$tmpdir/$tar");
-    rm_rf("$tmpdir/$dir_in_tar");
-}
-
-1;
-
diff --git a/perl-install/Xconfig/resolution_and_depth.pm b/perl-install/Xconfig/resolution_and_depth.pm
deleted file mode 100644
index 7179186ec..000000000
--- a/perl-install/Xconfig/resolution_and_depth.pm
+++ /dev/null
@@ -1,385 +0,0 @@
-package Xconfig::resolution_and_depth; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::card;
-use Xconfig::monitor;
-use common;
-
-
-our %depth2text = (
-      8 => N_("256 colors (8 bits)"),
-     15 => N_("32 thousand colors (15 bits)"),
-     16 => N_("65 thousand colors (16 bits)"),
-     24 => N_("16 million colors (24 bits)"),
-);
-our @depths_available = ikeys(%depth2text);
-
-my @bios_vga_modes = (
-    { bios => 769, X =>  640, Y =>  480, Depth =>  8 },
-    { bios => 771, X =>  800, Y =>  600, Depth =>  8 },
-    { bios => 773, X => 1024, Y =>  768, Depth =>  8 },
-    { bios => 775, X => 1280, Y => 1024, Depth =>  8 },
-    { bios => 777, X => 1600, Y => 1200, Depth =>  8 }, 
-    { bios => 784, X =>  640, Y =>  480, Depth => 15 },
-    { bios => 787, X =>  800, Y =>  600, Depth => 15 },
-    { bios => 790, X => 1024, Y =>  768, Depth => 15 },
-    { bios => 793, X => 1280, Y => 1024, Depth => 15 },
-    { bios => 796, X => 1600, Y => 1200, Depth => 15 }, 
-    { bios => 785, X =>  640, Y =>  480, Depth => 16 },
-    { bios => 788, X =>  800, Y =>  600, Depth => 16 },
-    { bios => 791, X => 1024, Y =>  768, Depth => 16 },
-    { bios => 794, X => 1280, Y => 1024, Depth => 16 },
-    { bios => 797, X => 1600, Y => 1200, Depth => 16 }, 
-);
-
-sub from_bios {
-    my ($bios) = @_;
-    find { $_->{bios} == $bios } @bios_vga_modes;
-}
-
-sub bios_vga_modes() { @bios_vga_modes }
-
-sub size2default_resolution {
-    my ($size) = @_; #- size in inch
-
-    if (arch() =~ /ppc/) {
-	require detect_devices;
-	return "1024x768" if detect_devices::get_mac_model() =~ /^PowerBook|^iMac/;
-    } elsif (is_xbox()) {
-	return "640x480";
-    }
-
-    my %monitorSize2resolution = (
-	13 => "640x480",
-	14 => "800x600",
-	15 => "800x600",
-	16 => "1024x768",
-	17 => "1024x768",
-	18 => "1024x768",
-	19 => "1280x1024",
-	20 => "1280x1024",
-	21 => "1600x1200",
-	22 => "1600x1200",
-    );
-    $monitorSize2resolution{round($size)} || ($size < 13 ? "640x480" : "1600x1200");
-}
-
-sub to_string {
-    my ($resolution) = @_;
-    $resolution or return '';
-
-    $resolution->{X} ? sprintf("%sx%s %dbpp", @$resolution{'X', 'Y', 'Depth'}) : 'frame-buffer';
-}
-
-sub allowed {
-    my ($card) = @_;
-
-    my ($prefered_depth, @resolution_and_depth);
-    
-    if ($card->{Driver} eq 'fbdev') {
-	@resolution_and_depth = grep { $_->{Depth} == 16 } @bios_vga_modes;
-    } else {
-	my @depths;
-	if ($card->{Driver} eq 'fglrx') {
-	    @depths = 24;
-	} elsif ($card->{BoardName} eq 'RIVA128') { 
-	    @depths = qw(8 15 24);
-	} elsif ($card->{use_DRI_GLX}) {
-	    $prefered_depth = 16;
-	    @depths = (16, 24);
-	} else {
-	    @depths = our @depths_available;
-	}
-	my @resolutions = @Xconfig::xfree::resolutions;
-
-	push @resolution_and_depth,
-	  map {
-	      my $Depth = $_;
-	      map { m/(\d+)x(\d+)/ && { X => $1, Y => $2, Depth => $Depth } } @resolutions;
-	  } @depths;
-    }
-    $prefered_depth, @resolution_and_depth;
-}
-
-# ($card->{VideoRam} || ($card->{server} eq 'FBDev' ? 2048 : 32768))
-sub filter_using_VideoRam {
-    my ($VideoRam, @resolutions) = @_;
-    my $mem = 1024 * $VideoRam;
-    grep { $_->{X} * $_->{Y} * $_->{Depth}/8 <= $mem } @resolutions;
-    
-}
-sub filter_using_HorizSync_VertRefresh {
-    my ($HorizSync, $VertRefresh, @resolutions) = @_;
-    my $max_hsync = 1000 * max(split(/[,-]/, $HorizSync));
-    my ($min_vsync, $max_vsync) = (min(split(/[,-]/, $VertRefresh)), max(split(/[,-]/, $VertRefresh)));
-
-    #- enforce at least 60Hz, if max_vsync > 100 (ie don't do it on LCDs which are ok with low vsync)
-    $min_vsync = max(60, $min_vsync) if $max_vsync > 100;
-
-    #- computing with {Y} which is active sync instead of total sync, but that's ok
-    grep { $max_hsync / $_->{Y} > $min_vsync } @resolutions;
-}
-
-sub choose {
-    my ($in, $default_resolution, @resolutions) = @_;
-
-    my $resolution = $default_resolution || {};
-    $in->ask_from(N("Resolutions"), "",
-		  [ {
-		     val => \$resolution, type => 'list', sort => 0,
-		     list => [ sort { $a->{X} <=> $b->{X} } @resolutions ],
-		     format => \&to_string,
-		    } ]) or return;
-    $resolution;
-}
-
-
-sub choices {
-    my ($_raw_X, $resolution_wanted, $card, $monitors) = @_;
-    $resolution_wanted ||= {};
-
-    my ($prefered_depth, @resolutions) = allowed($card);
-
-    @resolutions = filter_using_HorizSync_VertRefresh($monitors->[0]{HorizSync}, $monitors->[0]{VertRefresh}, @resolutions) if $monitors->[0]{HorizSync};
-    @resolutions = filter_using_VideoRam($card->{VideoRam}, @resolutions) if $card->{VideoRam};
-
-    #- sort it, so we can take the first one when we want the "best"
-    @resolutions = sort { $b->{X} <=> $a->{X} || $b->{Y} <=> $a->{Y} || $b->{Depth} <=> $a->{Depth} } @resolutions;
-
-    if ($resolution_wanted->{X} && !$resolution_wanted->{Y}) {
-	#- assuming ratio 4/3
-	$resolution_wanted->{Y} = round($resolution_wanted->{X} * 3 / 4);
-    } elsif (!$resolution_wanted->{X}) {
-	if ($monitors->[0]{preferred_resolution}) {
-	    put_in_hash($resolution_wanted, $monitors->[0]{preferred_resolution});
-	} elsif ($monitors->[0]{ModelName} =~ /^Flat Panel (\d+)x(\d+)$/) {
-	    put_in_hash($resolution_wanted, { X => $1, Y => $2 });
-	} else {
-	    my ($X, $Y) = split('x', size2default_resolution($monitors->[0]{diagonal_size} * 1.08 || 14));
-	    put_in_hash($resolution_wanted, { X => $X, Y => $Y });
-	}
-    }
-    my @matching = grep { $_->{X} eq $resolution_wanted->{X} && $_->{Y} eq $resolution_wanted->{Y} } @resolutions;
-    if (!@matching) {
-	#- hard choice :-(
-	#- first trying the greater resolution with same ratio
-	my $ratio = $resolution_wanted->{X} / $resolution_wanted->{Y};
-	@matching = grep { abs($ratio - $_->{X} / $_->{Y}) < 0.01 } @resolutions;
-    }
-    if (!@matching) {
-	#- really hard choice :'-(
-	#- take the first available resolution <= the wanted resolution
-	@matching = grep { $_->{X} < $resolution_wanted->{X} } @resolutions;
-    }
-    if (!@matching) {
-	@matching = @resolutions;
-    }
-
-    my $default_resolution;
-    foreach my $Depth ($resolution_wanted->{Depth}, $prefered_depth) {
-	$Depth and $default_resolution ||= find { $_->{Depth} eq $Depth } @matching;
-    }
-    $default_resolution ||= $matching[0];
-
-    $default_resolution, @resolutions;
-}
-
-sub configure {
-    my ($in, $raw_X, $card, $monitors, $b_auto) = @_;
-
-    my ($default_resolution, @resolutions) = choices($raw_X, $raw_X->get_resolution, $card, $monitors);
-
-    if ($b_auto) {
-	#- use $default_resolution
-	if ($card->{Driver} eq 'fglrx') {
-	    $default_resolution = first(find { $default_resolution->{Y} eq $_->{Y} && $_->{Depth} == 24 }
-					$default_resolution, @resolutions);
-	    $default_resolution ||= first(find { $_->{Depth} == 24 } $default_resolution, @resolutions);
-	}
-    } elsif ($in->isa('interactive::gtk')) {
-	$default_resolution = choose_gtk($in, $card, $default_resolution, @resolutions) or return;
-    } else {
-	$default_resolution = choose($in, $default_resolution, @resolutions) or return;
-    }
-    set_resolution($raw_X, $default_resolution);
-
-    $default_resolution;
-}
-
-sub configure_auto_install {
-    my ($raw_X, $card, $monitors, $old_X) = @_;
-
-    my $resolution_wanted = do {
-	my ($X, $Y) = split('x', $old_X->{resolution_wanted});
-	{ X => $X, Y => $Y, Depth => $old_X->{default_depth} };
-    };
-
-    my ($default_resolution) = choices($raw_X, $resolution_wanted, $card, $monitors);
-    $default_resolution or die "you selected an unusable depth";
-
-    set_resolution($raw_X, $default_resolution);
-
-    $default_resolution;
-}
-
-sub set_resolution {
-    my ($raw_X, $resolution) = @_; 
-    $raw_X->set_resolution($resolution);
-    set_default_background($resolution);
-}
-sub set_default_background {
-    my ($resolution) = @_;
-
-    my $ratio = $resolution->{X} / $resolution->{Y};
-    my $dir = "$::prefix/usr/share/mdk/backgrounds";
-    my @l = 
-      sort {
-	  $a->[1] <=> $b->[1] || $b->[2] <=> $a->[2] || $a->[1] <=> $b->[1];
-      } map {
-	  if (my ($X, $Y) = /^Mandrivalinux-(\d+)x(\d+).png$/) {
-	      [
-		  $_, 
-		  int(abs($ratio - $X / $Y) * 100), #- we want the nearest ratio (precision .01)
-		  $X >= $resolution->{X}, #- then we don't want a resolution smaller
-		  abs($X - $resolution->{X}), #- the nearest resolution
-	      ];
-	  } else { () }
-      } all($dir);
-
-    symlinkf $l[0][0], "$dir/default.png";
-}
-
-sub resolution2ratio {
-    my ($resolution, $b_non_strict) = @_;
-    my $res = $resolution->{X} . 'x' . $resolution->{Y};
-    $res eq '1280x1024' && $b_non_strict ? '4/3' : $Xconfig::xfree::resolution2ratio{$res};
-}
-
-sub choose_gtk {
-    my ($in, $card, $default_resolution, @resolutions) = @_;
-
-    $_->{ratio} ||= resolution2ratio($_) foreach @resolutions;
-
-    my $chosen_Depth = $default_resolution->{Depth};
-    my $chosen_res = { X => $default_resolution->{X} || 1024, Y => $default_resolution->{Y} };
-    my $chosen_ratio = resolution2ratio($chosen_res, 'non-strict') || '4/3';
-
-    my $filter_on_ratio = sub {
-	grep {
-	    !$chosen_ratio
-	      || $_->{ratio} eq $chosen_ratio 
-	      || $chosen_ratio eq '4/3' && "$_->{X}x$_->{Y}" eq '1280x1024';
-	} @_;
-    };
-    my $filter_on_Depth = sub {
-	grep { $_->{Depth} == $chosen_Depth } @_;
-    };
-    my $filter_on_res = sub {
-	grep { $_->{X} == $chosen_res->{X} && $_->{Y} == $chosen_res->{Y} } @_;
-    };
-    #- $chosen_res must be one of @resolutions, so that it has a correct {ratio} field
-    $chosen_res = first($filter_on_res->(@resolutions)) || $resolutions[0];
-
-    require ugtk2;
-    mygtk2->import;
-    ugtk2->import(qw(:create :helpers :wrappers));
-    my $W = ugtk2->new(N("Resolution"), modal => 1);
-
-    my %monitor_images_x_res = do {
-	my @l = qw(640 800 1024 1152 1280 1400 1600 1920 2048);
-	my %h = map { $_ => ugtk2::_find_imgfile("monitor-$_.png") } @l;
-
-	#- for the other, use the biggest smaller
-	foreach my $x_res (uniq map { $_->{X} } @resolutions) {
-	    my $x_res_ = max(grep { $_ <= $x_res } @l);
-	    $h{$x_res} ||= $h{$x_res_} || $h{640};
-	}
-	%h;
-    };
-
-    my $res2text = sub { "$_[0]{X}x$_[0]{Y}" . ($chosen_ratio || $_[0]{ratio} =~ /other/ ? '' : "  ($_[0]{ratio})") };
-    my @matching_ratio;
-    my $proposed_resolutions = [];
-    my $set_proposed_resolutions = sub {
-	my ($suggested_res) = @_;
-	@matching_ratio = $filter_on_ratio->(@resolutions);
-	gtkval_modify(\$proposed_resolutions, [ 
-	    (reverse uniq_ { $res2text->($_) } @matching_ratio),
-	    if_($chosen_ratio, { text => N_("Other") }),
-	]);
-	if (!$filter_on_res->(@matching_ratio)) {
-	    my $res = $suggested_res || find { $_->{X} == $chosen_res->{X} } @matching_ratio;
-	    gtkval_modify(\$chosen_res, $res || $matching_ratio[0]);
-	}
-    };
-    $set_proposed_resolutions->();
-
-    my $depth_combo = gtknew('ComboBox', width => 220, 
-			     text_ref => \$chosen_Depth,
-			     format => sub { translate($depth2text{$_[0]}) },
-			     list => [ uniq(reverse map { $_->{Depth} } @resolutions) ],
-			     changed => sub {
-				 my @matching_Depth = $filter_on_Depth->(@matching_ratio);
-				 if (!$filter_on_res->(@matching_Depth)) {
-				     gtkval_modify(\$chosen_res, $matching_Depth[0]);
-				 }
-			     });
-    my $previous_res = $chosen_res;
-    my $res_combo = gtknew('ComboBox', 
-			   text_ref => \$chosen_res,
-			   format => sub { $_[0]{text} ? translate($_[0]{text}) : &$res2text },
-			   list_ref => \$proposed_resolutions,
-			   changed => sub {
-			       if ($chosen_res->{text}) {
-				   undef $chosen_ratio;
-				   $set_proposed_resolutions->($previous_res);
-			       } else {
-				   my @matching_res = $filter_on_res->(@matching_ratio);
-				   if (!$filter_on_Depth->(@matching_res)) {
-				       gtkval_modify(\$chosen_Depth, $matching_res[0]{Depth});
-				   }
-				   $previous_res = $chosen_res;
-			       }
-			   });
-    my $pix_colors = gtknew('Image', 
-			    file_ref => \$chosen_Depth,
-			    format => sub {
-				$_[0] >= 24 ? "colors.png" : $_[0] >= 15 ? "colors16.png" : "colors8.png";
-			    });
-    my $pixmap_mo = gtknew('Image', 
-			   file_ref => \$chosen_res,
-			   format => sub {
-			       $monitor_images_x_res{$_[0]{X}} or internal_error("no image for resolution $chosen_res->{X}");
-			   });
-
-    my $help_sub = $in->interactive_help_sub_display_id('configureX_resolution');
-    gtkadd($W->{window},
-	   gtkpack_($W->create_box_with_title(N("Choose the resolution and the color depth"),
-					      if_($card->{BoardName}, "(" . N("Graphics card: %s", $card->{BoardName}) . ")"),
-					     ),
-		    1, '',
-		    0, $pixmap_mo,
-		    0, gtknew('HBox', children => [
-			  1, '',
-			  0, gtknew('Table', col_spacings => 5, row_spacings => 5, 
-				    children => [
-						 [ $res_combo, gtknew('Label', text => "") ],
-						 [ $depth_combo, gtknew('Frame', shadow_type => 'etched_out', child => $pix_colors) ],
-						]),
-			  1, '',
-		       ]),
-	            1, '',
-		    0, gtkadd($W->create_okcancel(N("Ok"), N("Cancel"), '', if_($help_sub, [ N("Help"), $help_sub, 1 ]))),
-		    ));
-    $W->{ok}->grab_focus;
-
-    $W->main or return;
-
-    find { $_->{X} == $chosen_res->{X} && 
-	   $_->{Y} == $chosen_res->{Y} && 
-	   $_->{Depth} == $chosen_Depth } @resolutions;
-}
-
-1;
diff --git a/perl-install/Xconfig/screen.pm b/perl-install/Xconfig/screen.pm
deleted file mode 100644
index e0a3ebd64..000000000
--- a/perl-install/Xconfig/screen.pm
+++ /dev/null
@@ -1,29 +0,0 @@
-package Xconfig::screen; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-
-sub configure {
-    my ($raw_X) = @_;
-
-    my @devices = $raw_X->get_devices;
-    my @monitors = $raw_X->get_monitors;
-
-    if (@monitors < @devices) {
-	$raw_X->set_monitors(@monitors, ({}) x (@devices - @monitors));
-	@monitors = $raw_X->get_monitors;
-    }
-
-    my @sections = mapn {
-	my ($device, $monitor) = @_;
-	{ Device => $device->{Identifier}, Monitor => $monitor->{Identifier} };
-    } \@devices, \@monitors;
-
-    $raw_X->set_screens(@sections);
-    1;
-}
-
-1;
diff --git a/perl-install/Xconfig/test.pm b/perl-install/Xconfig/test.pm
deleted file mode 100644
index 524530bef..000000000
--- a/perl-install/Xconfig/test.pm
+++ /dev/null
@@ -1,140 +0,0 @@
-package Xconfig::test; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::card;
-use run_program;
-use common;
-use log;
-
-
-my $tmpconfig = "/tmp/Xconfig";
-
-
-sub xtest {
-    my ($display) = @_;
-    eval {
-	require xf86misc::main;
-	xf86misc::main::Xtest($display);
-    };
-}
-
-sub test {
-    my ($in, $raw_X, $card, $auto, $skip_badcard) = @_;
-
-    my $bad_card = !Xconfig::card::check_bad_card($card);
-    return 1 if $skip_badcard && $bad_card;
-
-    if ($bad_card || !$auto) {
-	$in->ask_yesorno(N("Test of the configuration"), 
-			 N("Do you want to test the configuration?") . ($bad_card ? "\n" . N("Warning: testing this graphic card may freeze your computer") : ''),
-			 !$bad_card) or return 1;
-    }
-
-    unlink "$::prefix/tmp/.X9-lock";
-
-    #- create a link from the non-prefixed /tmp/.X11-unix/X9 to the prefixed one
-    #- that way, you can talk to :9 without doing a chroot
-    #- but take care of non X11 install :-)
-    if (-d "/tmp/.X11-unix") {
-	symlinkf "$::prefix/tmp/.X11-unix/X9", "/tmp/.X11-unix/X9" if $::prefix;
-    } else {
-	symlinkf "$::prefix/tmp/.X11-unix", "/tmp/.X11-unix" if $::prefix;
-    }
-
-    #- ensure xfs is running
-    fuzzy_pidofs(qr/\bxfs\b/) or do { run_program::rooted($::prefix, "/etc/rc.d/init.d/xfs", $_) foreach 'stop', 'start' };
-    fuzzy_pidofs(qr/\bxfs\b/) or die "xfs is not running";
-
-    my $f = $::testing ? $tmpconfig : "/etc/X11/XF86Config.test";
-    $raw_X->write("$::prefix/$f");
-
-    my $f_err = common::secured_file($::prefix . ($ENV{TMPDIR} || "$ENV{HOME}/tmp") . '/.drakx.Xoutput');
-    
-    my $pid;
-    unless ($pid = fork()) {
-	system("xauth add :9 . `mcookie`");
-	open STDERR, ">$f_err";
-	chroot $::prefix if $::prefix;
-	exec 'Xorg', '-xf86config', $f, ":9" or c::_exit(0);
-    }
-
-    do { sleep 1 } until xtest(":9") || waitpid($pid, c::WNOHANG());
-
-    my $_b = before_leaving { unlink $f_err };
-
-    my $warn_error = sub {
-	my ($error_msg) = @_;
-	$in->ask_warn('', [ N("An error occurred:\n%s\nTry to change some parameters", $error_msg) ]);
-    };
-
-    if (!xtest(":9")) {
-	open(my $F, $f_err);
-
-	local $_;
-      i: while (<$F>) {
-	    if (/^\(EE\)/ && !/Disabling/ || /^Fatal\b/) {
-		my @msg = !/error/ && $_;
-		local $_;
-		while (<$F>) {
-		    /reporting a problem/ and last;
-		    $warn_error->(join('', @msg, $_));
-		    return 0;
-		}
-	    }
-	}
-    }
-
-    open(my $F, "|perl 2>/dev/null");
-    printf $F q(
-        use lib qw(%s);
-        BEGIN { $::no_ugtk_init = 1 }
-        require lang;
-        require ugtk2; #- help perl_checker
-        ugtk2->import(qw(:wrappers :helpers)); #- help perl_checker
-	use interactive::gtk;
-        use run_program;
-        use common;
-
-        $::prefix = "%s";
-
-        lang::bindtextdomain();
-
-	$ENV{DISPLAY} = ":9";
-        Gtk2->init;
-
-        gtkset_background(200 * 257, 210 * 257, 210 * 257);
-        my $text = Gtk2::Label->new;
-        my $time = 12;
-        Glib::Timeout->add(1000, sub {
-	    $text->set(sprintf(translate("%s"), $time));
-	    $time-- or Gtk2->main_quit;
-            1;
-	});
-
-        eval {  #- eval it so that missing pixmap will not break the test completely
-            my $root = gtkroot();
-            my $gc = Gtk2::Gdk::GC->new($root);
-            my $pixbuf = Gtk2::Gdk::Pixbuf->new_from_file("$::prefix/usr/share/mdk/xfdrake/xfdrake-test-card.png");
-            my ($w, $h) = ($pixbuf->get_width, $pixbuf->get_height);
-            my $pixmap = Gtk2::Gdk::Pixmap->new($root, $w, $h, $root->get_depth);
-            $pixbuf->render_to_drawable($pixmap, $gc, 0, 0, 0, 0, $w, $h, 'none', 0, 0);
-            $root->set_back_pixmap($pixmap, 0);
-            $root->clear;
-        };
-
-        my $in = interactive::gtk->new;
-	$in->exit($in->ask_yesorno('', [ translate("%s"), $text ], 0) ? 0 : 222);
-    ), join(' ', @INC), $::prefix, N_("Leaving in %d seconds"), N_("Is this the correct setting?");
-    my $rc = close $F;
-    my $err = $?;
-
-    $rc || $err == 222 << 8 or $warn_error->('');
-
-    unlink "$::prefix/$f", "$::prefix/$f-4";
-    unlink "/tmp/.X11-unix/X9" if $::prefix;
-    kill 2, $pid;
-
-    $rc;
-}
diff --git a/perl-install/Xconfig/various.pm b/perl-install/Xconfig/various.pm
deleted file mode 100644
index 6a8a93551..000000000
--- a/perl-install/Xconfig/various.pm
+++ /dev/null
@@ -1,175 +0,0 @@
-package Xconfig::various; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::card;
-use Xconfig::default;
-use Xconfig::resolution_and_depth;
-use common;
-
-
-sub to_string {
-    my ($raw_X) = @_;
-
-    $raw_X->is_fbdev ? 'frame-buffer' : Xconfig::resolution_and_depth::to_string($raw_X->get_resolution);
-}
-
-sub info {
-    my ($raw_X, $card) = @_;
-    my $info;
-    my $xf_ver = Xconfig::card::xorg_version();
-    my $title = $card->{use_DRI_GLX} ? N("Xorg %s with 3D hardware acceleration", $xf_ver) : 
-                                       N("Xorg %s", $xf_ver);
-    my $keyboard = eval { $raw_X->get_keyboard } || {};
-    my @monitors = eval { $raw_X->get_monitors };
-    my $device = eval { $raw_X->get_device } || {};
-    my $mouse = eval { first($raw_X->get_mice) } || {};
-
-    $info .= N("Keyboard layout: %s\n", $keyboard->{XkbLayout});
-    $info .= N("Mouse type: %s\n", $mouse->{Protocol});
-    $info .= N("Mouse device: %s\n", $mouse->{Device}) if $::expert;
-    foreach my $monitor (@monitors) {
-	$info .= N("Monitor: %s\n", $monitor->{ModelName});
-	$info .= N("Monitor HorizSync: %s\n", $monitor->{HorizSync}) if $::expert;
-	$info .= N("Monitor VertRefresh: %s\n", $monitor->{VertRefresh}) if $::expert;
-    }
-    $info .= N("Graphics card: %s\n", $device->{VendorName} . ' ' . $device->{BoardName});
-    $info .= N("Graphics memory: %s kB\n", $device->{VideoRam}) if $device->{VideoRam};
-    if (my $resolution = eval { $raw_X->get_resolution }) {
-	$info .= N("Color depth: %s\n", translate($Xconfig::resolution_and_depth::depth2text{$resolution->{Depth}}));
-	$info .= N("Resolution: %s\n", join('x', @$resolution{'X', 'Y'}));
-    }
-    $info .= N("Xorg driver: %s\n", $device->{Driver}) if $device->{Driver};
-    "$title\n\n$info";
-}
-
-sub various {
-    my ($in, $card, $options, $b_auto) = @_;
-
-    tvout($in, $card, $options) if !$b_auto;
-    choose_xdm($in, $b_auto);
-    1;
-}
-
-sub runlevel {
-    my ($o_runlevel) = @_;
-    my $f = "$::prefix/etc/inittab";
-    -r $f or log::l("missing inittab!!!"), return;
-    if ($o_runlevel) {
-	substInFile { s/^id:\d:initdefault:\s*$/id:$o_runlevel:initdefault:\n/ } $f if !$::testing;
-    } else {
-	cat_($f) =~ /^id:(\d):initdefault:\s*$/m && $1;
-    }
-}
-
-sub choose_xdm {
-    my ($in, $b_auto) = @_;
-    my $xdm = $::isStandalone ? runlevel() == 5 : 1;
-
-    if (!$b_auto) {
-	$xdm = $in->ask_yesorno_({ 
-				  title => N("Graphical interface at startup"),
-				  messages =>
-N("I can setup your computer to automatically start the graphical interface (Xorg) upon booting.
-Would you like Xorg to start when you reboot?"),
-				  interactive_help_id => 'configureXxdm',
-				 }, $xdm);
-    }
-    runlevel($xdm ? 5 : 3);
-}
-
-sub tvout {
-    my ($in, $card, $options) = @_;
-
-    $card->{FB_TVOUT} && $options->{allowFB} or return;
-
-    $in->ask_yesorno('', N("Your graphic card seems to have a TV-OUT connector.
-It can be configured to work using frame-buffer.
-
-For this you have to plug your graphic card to your TV before booting your computer.
-Then choose the \"TVout\" entry in the bootloader
-
-Do you have this feature?")) or return;
-    
-    #- rough default value (rationale: http://download.nvidia.com/XFree86_40/1.0-2960/README.txt)
-    require timezone;
-    my $norm = timezone::read()->{timezone} =~ /America/ ? 'NTSC' : 'PAL';
-
-    $norm = $in->ask_from_list('', N("What norm is your TV using?"), [ 'NTSC', 'PAL' ], $norm) or return;
-
-    configure_FB_TVOUT($in->do_pkgs, { norm => $norm });
-}
-
-sub configure_FB_TVOUT {
-    my ($do_pkgs, $use_FB_TVOUT) = @_;
-
-    my $raw_X = Xconfig::default::configure($do_pkgs);
-    return if is_empty_array_ref($raw_X);
-
-    $raw_X->set_monitors({ HorizSync => '30-50', VertRefresh => ($use_FB_TVOUT->{norm} eq 'NTSC' ? 60 : 50),
-			   ModeLine => [ 
-	{ val => '"640x480"   29.50       640 675 678 944  480 530 535 625', pre_comment => "# PAL\n" },
-	{ val => '"800x600"   36.00       800 818 820 960  600 653 655 750' },
-	{ val => '"640x480"  28.195793   640 656 658 784  480 520 525 600', pre_comment => "# NTSC\n" },
-	{ val => '"800x600"  38.769241   800 812 814 880  600 646 649 735' },
-    ] });
-    $raw_X->set_devices({ Driver => 'fbdev' });
-
-    my ($device) = $raw_X->get_devices;
-    my ($monitor) = $raw_X->get_monitors;
-    $raw_X->set_screens({ Device => $device->{Identifier}, Monitor => $monitor->{Identifier} });
-
-    my $Screen = $raw_X->get_default_screen;
-    $Screen->{Display} = [ map { { l => { Depth => { val => $_ } } } } 8, 16 ];
-
-    $raw_X->write("$::prefix/etc/X11/XF86Config.tvout");
-
-    check_XF86Config_symlink();
-
-    {
-	require bootloader;
-	require fsedit;
-	require detect_devices;
-	my $all_hds = $::isInstall ? $::o->{all_hds} : fsedit::get_hds();
-	my $bootloader = $::isInstall ? $::o->{bootloader} : bootloader::read($all_hds);
-	
-	if (my $tvout = bootloader::duplicate_kernel_entry($bootloader, 'TVout')) {
-	    $tvout->{append} .= " XFree=tvout";
-	    bootloader::install($bootloader, $all_hds);
-	}
-    }
-}
-
-sub check_XF86Config_symlink() {
-    my $f = "$::prefix/etc/X11/XF86Config";
-    if (!-l $f && -e "$f.tvout") {
-	rename $f, "$f.standard";
-	symlink "XF86Config.standard", $f;
-    }
-}
-
-sub setupFB {
-    my ($bios_vga_mode) = @_;
-
-    require bootloader;
-    my ($bootloader, $all_hds);
-
-    if ($::isInstall) {
-	($bootloader, $all_hds) = ($::o->{bootloader}, $::o->{all_hds});
-    } else {
-	$all_hds = fsedit::get_hds();
-	fs::get_info_from_fstab($all_hds);
-
-	$bootloader = bootloader::read($all_hds) or return;
-    }
-
-    foreach (@{$bootloader->{entries}}) {
-	$_->{vga} = $bios_vga_mode if $_->{vga}; #- replace existing vga= with
-    }
-
-    bootloader::action($bootloader, 'write', $all_hds);
-    bootloader::action($bootloader, 'when_config_changed');
-}
-
-1;
diff --git a/perl-install/Xconfig/xfree.pm b/perl-install/Xconfig/xfree.pm
deleted file mode 100644
index da6799b6a..000000000
--- a/perl-install/Xconfig/xfree.pm
+++ /dev/null
@@ -1,720 +0,0 @@
-package Xconfig::xfree; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use Xconfig::parse;
-
-#- mostly internal only
-sub new {
-    my ($class, $val) = @_;
-    bless $val, $class;
-}
-
-sub _conf_files() {
-    map { "$::prefix/etc/X11/$_" } 'xorg.conf', 'XF86Config-4', 'XF86Config';
-}
-
-################################################################################
-# I/O ##########################################################################
-################################################################################
-sub read_and_prepare_write {
-    my ($class) = @_;
-    my $file = find { -f $_ } _conf_files();
-    my $raw_X = $class->new(Xconfig::parse::read_XF86Config($file));
-    my $before = $raw_X->prepare_write;
-
-    if (my ($Keyboard) = $raw_X->get_InputDevices('Keyboard')) {
-	$Keyboard->{Driver}{val} = 'keyboard';
-    }
-
-    #- ugly hack to fix empty ModeLine lines, XFdrake seems to generate some, but where???
-    #- at least this allows fixing the pb by re-running XFdrake 
-    foreach ($raw_X->get_Sections('Monitor')) {
-	my $l = $_->{ModeLine} or next;
-	@$l = grep { $_->{val} } @$l;
-    }
-
-    $raw_X, $before;
-}
-sub read {
-    my ($class) = @_;
-    first(read_and_prepare_write($class));
-}
-sub write {
-    my ($raw_X, $o_file) = @_;
-    my $file = $o_file || first(_conf_files());
-    if (!$o_file) {
-	foreach (_conf_files()) {
-	    if (-l $_) {
-		unlink $_;
-	    } else {
-		renamef($_, "$_.old"); #- there will not be any XF86Config nor XF86Config-4 anymore, we want this!
-	    }
-	}
-	#- keep it for old programs still using this name
-	symlink basename($file), "$::prefix/etc/X11/XF86Config";
-    }
-    Xconfig::parse::write_XF86Config($raw_X, $file);
-}
-sub prepare_write {
-    my ($raw_X) = @_;
-    join('', Xconfig::parse::prepare_write_XF86Config($raw_X));
-}
-sub empty_config {
-    my ($class) = @_;
-    $class->new(Xconfig::parse::read_XF86Config_from_string(our $default_header));
-}
-
-################################################################################
-# keyboard #####################################################################
-################################################################################
-my @keyboard_fields = qw(XkbLayout XkbModel XkbDisable XkbOptions XkbCompat);
-sub get_keyboard {
-    my ($raw_X) = @_;
-    my $raw_kbd = first(map { $raw_X->get_InputDevices($_) } 'keyboard', 'kbd') or die "no keyboard section";
-    raw_export_section($raw_kbd, \@keyboard_fields);
-}
-sub set_keyboard {
-    my ($raw_X, $kbd) = @_;
-    my $raw_kbd = first(map { $raw_X->get_InputDevices($_) } 'keyboard', 'kbd') || _new_keyboard_section($raw_X);
-    raw_import_section($raw_kbd, $kbd);
-    _set_Option('keyboard', $raw_kbd, keys %$kbd);
-}
-sub _new_keyboard_section {
-    my ($raw_X) = @_;
-    my $raw_kbd = { Identifier => { val => 'Keyboard1' }, Driver => { val => 'keyboard' } };
-    $raw_X->add_Section('InputDevice', $raw_kbd);
-
-    my $layout = get_ServerLayout($raw_X)->{InputDevice} ||= [];
-    push @$layout, { val => '"Keyboard1" "CoreKeyboard"' };
-
-    $raw_kbd;
-}
-
-
-################################################################################
-# mouse ########################################################################
-################################################################################
-#- example: { Protocol => 'IMPS/2', Device => '/dev/psaux', Emulate3Buttons => undef, Emulate3Timeout => 50, ZAxisMapping => [ '4 5', '6 7' ] }
-my @mouse_fields = qw(Protocol Device ZAxisMapping Emulate3Buttons Emulate3Timeout); #-);
-sub get_mice {
-    my ($raw_X) = @_;
-    my @raw_mice = $raw_X->get_InputDevices('mouse');
-    map { raw_export_section($_, \@mouse_fields) } @raw_mice;
-}
-sub set_mice {
-    my ($raw_X, @mice) = @_;
-    my @raw_mice = _new_mouse_sections($raw_X, int @mice);
-    mapn { 
-	my ($raw_mouse, $mouse) = @_;
-	raw_import_section($raw_mouse, $mouse);
-	_set_Option('mouse', $raw_mouse, keys %$mouse);
-    } \@raw_mice, \@mice;
-}
-sub _new_mouse_sections {
-    my ($raw_X, $nb_new) = @_;
-    $raw_X->remove_InputDevices('mouse');
-    
-    my $layout = get_ServerLayout($raw_X)->{InputDevice} ||= [];
-    @$layout = grep { $_->{val} !~ /^"Mouse/ } @$layout;
-    
-    $nb_new or return;
-    
-    my @l = map {
-	my $h = { Identifier => { val => "Mouse$_" }, Driver => { val => 'mouse' } };
-	$raw_X->add_Section('InputDevice', $h);
-    } (1 .. $nb_new);
-    
-    push @$layout, { val => qq("Mouse1" "CorePointer") };
-    push @$layout, { val => qq("Mouse$_" "SendCoreEvents") } foreach 2 .. $nb_new;
-    
-    @l;
-}
-
-
-################################################################################
-# resolution ###################################################################
-################################################################################
-sub get_resolution {
-    my ($raw_X, $o_Screen) = @_;
-    my $Screen = $o_Screen || $raw_X->get_default_screen or return {};
-    
-    my $depth = val($Screen->{DefaultColorDepth});
-    my $Display = find { !$depth || val($_->{l}{Depth}) eq $depth } @{$Screen->{Display} || []} or return {};
-    $Display->{l}{Virtual} && val($Display->{l}{Virtual}) =~ /(\d+)\s+(\d+)/ or
-      val($Display->{l}{Modes}) =~ /(\d+)x(\d+)/ or return {};
-    { X => $1, Y => $2, Depth => val($Display->{l}{Depth}) };
-}
-sub set_resolution {
-    my ($raw_X, $resolution, $o_Screen_) = @_;
-    
-    foreach my $Screen ($o_Screen_ ? $o_Screen_ : $raw_X->get_Sections('Screen')) {
-	$Screen ||= $raw_X->get_default_screen or internal_error('no screen');
-
-	my $Mode_name = (any { $_->{l}{Modes} } @{$Screen->{Display} || []}) ? 'Modes' : 'Virtual';
-	my $Mode = sprintf($Mode_name eq 'Modes' ? '"%dx%d"' : '%d %d', @$resolution{'X', 'Y'});
-	
-	$Screen->{DefaultColorDepth} = { val => $resolution->{Depth} eq '32' ? 24 : $resolution->{Depth} };	
-	$Screen->{Display} = [ map {
-	    { l => { Depth => { val => $_ }, $Mode_name => { val => $Mode } } };
-	} 8, 15, 16, 24 ];
-    }
-    add_gtf_ModeLines($raw_X, $resolution);
-}
-
-
-################################################################################
-# device #######################################################################
-################################################################################
-my @device_fields = qw(VendorName BoardName Driver VideoRam Screen BusID); #-);
-sub get_device {
-    my ($raw_X) = @_;
-    first(get_devices($raw_X));
-}
-sub get_devices {
-    my ($raw_X) = @_;
-    my @raw_devices = $raw_X->get_Sections('Device');
-    map {
-	my $raw_device = $_;
-	my $device = raw_export_section($raw_device, [ 'Identifier', @device_fields ]);
-	$device->{Options} = raw_export_section($raw_device, [ grep { (deref_array($raw_device->{$_}))[0]->{Option} } keys %$raw_device ]);
-	$device;
-    } @raw_devices;
-}
-sub set_devices {
-    my ($raw_X, @devices) = @_;
-    my @raw_devices = _new_device_sections($raw_X, int @devices);
-    mapn { 
-	my ($raw_device, $device) = @_;
-	my %Options  = %{$device->{Options} || {}};
-	raw_import_section($raw_device, $device, \@device_fields);
-	raw_import_section($raw_device, \%Options);
-	$_->{Option} = 1 foreach map { deref_array($raw_device->{$_}) } keys %Options;
-	$raw_device->{''} = [ { post_comment => $device->{raw_LINES} } ] if $device->{raw_LINES};
-    } \@raw_devices, \@devices;
-}
-sub _new_device_sections {
-    my ($raw_X, $nb_new) = @_;
-    $raw_X->remove_Section('Device');
-    map { $raw_X->add_Section('Device', { Identifier => { val => "device$_" }, DPMS => { Option => 1 } }) } (1 .. $nb_new);
-}
-sub get_Driver {
-    my ($raw_X) = @_;
-    my $card = eval { $raw_X->get_device };
-    $card && $card->{Driver};
-}
-
-################################################################################
-# wacoms #######################################################################
-################################################################################
-sub set_wacoms {
-    my ($raw_X, @wacoms) = @_;
-    $raw_X->remove_InputDevices('wacom');
-    
-    my $layout = get_ServerLayout($raw_X)->{InputDevice} ||= [];
-    @$layout = grep { $_->{val} !~ /^"(Stylus|Eraser|Cursor)/ } @$layout;
-    
-    @wacoms or return;
-    
-    my %Modes = (Stylus => 'Absolute', Eraser => 'Absolute', Cursor => 'Relative');
-    
-    each_index {
-	my $wacom = $_;
-	foreach (keys %Modes) {
-	    my $identifier = $_ . ($::i + 1);
-	    my $h = { Identifier => { val => $identifier }, 
-		      Driver => { val => 'wacom' },
-		      Type => { val => lc $_, Option => 1 },
-		      Device => { val => $wacom->{Device}, Option => 1 },
-		      Mode => { val => $Modes{$_}, Option => 1 },
-		      if_($wacom->{USB}, USB => { Option => 1 })
-		    };
-	    $raw_X->add_Section('InputDevice', $h);
-	    push @$layout, { val => qq("$identifier" "AlwaysCore") };
-	}
-    } @wacoms;
-}
-
-
-################################################################################
-# synaptics ####################################################################
-################################################################################
-sub set_synaptics {
-    my ($raw_X, @synaptics) = @_;
-    $raw_X->remove_InputDevices('synaptics');
-
-    my $layout = get_ServerLayout($raw_X)->{InputDevice} ||= [];
-    @$layout = grep { $_->{val} !~ /^"SynapticsMouse/ } @$layout;
-
-    @synaptics or return;
-    add_load_module($raw_X, "synaptics");
-
-    each_index {
-	my $synaptics_mouse = $_;
-        my $identifier = "SynapticsMouse" . ($::i + 1);
-        my $pointer_type = $synaptics_mouse->{Primary} ? "CorePointer" : "AlwaysCore";
-        my $h = {
-            Identifier => { val => $identifier },
-            Driver => { val => "synaptics" },
-        };
-        my %opts = (
-            Device => $synaptics_mouse->{Device},
-            Protocol => $synaptics_mouse->{Protocol},
-            $synaptics_mouse->{ALPS} ? (
-                #- from /usr/share/doc/synaptics-0.14.0/README.alps
-                #- and http://qa.mandrakesoft.com/show_bug.cgi?id=14512
-                LeftEdge => 120,
-                RightEdge => 830,
-                TopEdge => 120,
-                BottomEdge => 650,
-                FingerLow => 14,
-                FingerHigh => 15,
-                MaxTapTime => 180,
-                MaxTapMove => 110,
-                EmulateMidButtonTime => 75,
-                VertScrollDelta => 20,
-                HorizScrollDelta => 20,
-                MinSpeed => '0.8',
-                MaxSpeed => '1.00',
-                AccelFactor => '0.015',
-                EdgeMotionMinSpeed => 200,
-                EdgeMotionMaxSpeed => 200,
-                UpDownScrolling => 1,
-                CircularScrolling => 1,
-                CircScrollDelta => '0.1',
-                CircScrollTrigger => 2,
-                UpDownScrolling => 0,
-            ) : (
-                #- from /usr/share/doc/synaptics-0.14.0/INSTALL
-                LeftEdge => 1700,
-                RightEdge => 5300,
-                TopEdge => 1700,
-                BottomEdge => 4200,
-                FingerLow => 25,
-                FingerHigh => 30,
-                MaxTapTime => 180,
-                MaxTapMove => 220,
-                VertScrollDelta => 100,
-                MinSpeed => '0.09',
-                MaxSpeed => '0.18',
-                AccelFactor => '0.0015',
-            ),
-            SHMConfig => "on",
-        );
-        while (my ($k, $v) = each %opts) {
-            $h->{$k} = { val => $v, Option => 1 };
-        }
-        $raw_X->add_Section('InputDevice', $h);
-        push @$layout, { val => qq("$identifier" "$pointer_type") };
-    } @synaptics;
-}
-
-
-################################################################################
-# monitor ######################################################################
-################################################################################
-my @monitor_fields = qw(VendorName ModelName HorizSync VertRefresh);
-sub get_monitors {
-    my ($raw_X) = @_;
-    my @raw_monitors = $raw_X->get_Sections('Monitor');
-    map { 
-	my $h = raw_export_section($_, [ 'Identifier', @monitor_fields ]);
-	$h->{ModeLine} = $_->{ModeLine};
-	$h;
-    } @raw_monitors;
-}
-sub set_monitors {
-    my ($raw_X, @monitors) = @_;
-    my @raw_monitors = _new_monitor_sections($raw_X, int @monitors);
-    mapn { 
-	my ($raw_monitor, $monitor) = @_;
-	raw_import_section($raw_monitor, $monitor, \@monitor_fields);
-	$raw_monitor->{ModeLine} = $monitor->{ModeLine};
-    } \@raw_monitors, \@monitors;
-}
-sub get_or_new_monitors {
-    my ($raw_X, $nb_new) = @_;
-    my @monitors = $raw_X->get_monitors;
-
-    #- ensure we have exactly $nb_new monitors;
-    if ($nb_new > @monitors) {
-	@monitors, ({}) x ($nb_new - @monitors);
-    } else {
-	splice(@monitors, 0, $nb_new);
-    }
-}
-sub _new_monitor_sections {
-    my ($raw_X, $nb_new) = @_;
-    $raw_X->remove_Section('Monitor');
-    map { $raw_X->add_Section('Monitor', { Identifier => { val => "monitor$_" }, ModeLine => default_ModeLine() }) } (1 .. $nb_new);
-}
-sub default_ModeLine() {
-    ModeLine_from_string(qq(Section "Monitor"\n) . (our $default_ModeLine) . qq(EndSection\n));
-}
-
-sub add_gtf_ModeLines {
-    my ($raw_X, $resolution) = @_;
-
-    my $banner = 'modeline generated by gtf(1) [handled by XFdrake]';
-    my $res = $resolution->{X} . 'x' . $resolution->{Y};
-    my @to_add;
-    if ($res ne '1280x1024' && 
-	  ($res eq '1400x1050' || $res eq '1152x864' || $Xconfig::xfree::resolution2ratio{$res} ne '4/3')) {
-	@to_add = map {
-	    my $s = run_program::rooted_get_stdout($::prefix, 'gtf', $resolution->{X}, $resolution->{Y}, $_);
-	    if (my ($name, $val) = $s =~ /ModeLine\s*"(.*)"(.*)/i) {
-		chomp $val;
-		$name =~ s/\.00//;	#- nicer that way
-		{ val => qq("${name}"$val), pre_comment => "# $banner\n" };
-	    } else { () }
-	} reverse(sort_numbers(@Xconfig::xfree::vfreqs));
-    }
-
-    $raw_X->set_monitors(map {
-	@{$_->{ModeLine}} = (
-	    (grep { index($_->{pre_comment}, $banner) == -1 } @{$_->{ModeLine}}),
-	    @to_add,
-	);
-	$_;
-    } $raw_X->get_monitors);
-    
-    1;
-}
-
-
-################################################################################
-# screens ######################################################################
-################################################################################
-sub get_default_screen {
-    my ($raw_X) = @_;
-    my @l = $raw_X->get_Sections('Screen');
-    (find { $_->{Identifier} && val($_->{Identifier}) eq 'screen1' || 
-	      $_->{Driver} && val($_->{Driver}) =~ /svga|accel/ } @l) || $l[0];
-}
-sub set_screens {
-    my ($raw_X, @screens) = @_;
-    my @raw_screens = _new_screen_sections($raw_X, int @screens);
-    mapn { 
-	my ($raw_screen, $screen) = @_;
-	raw_import_section($raw_screen, $screen);
-    } \@raw_screens, \@screens;
-}
-sub _new_screen_sections {
-    my ($raw_X, $nb_new) = @_;
-    $raw_X->remove_Section('Screen');
-    my @l = map { $raw_X->add_Section('Screen', { Identifier => { val => "screen$_" } }) } (1 .. $nb_new);
-
-    get_ServerLayout($raw_X)->{Screen} = [ 
-	{ val => qq("screen1") },
-	map { { val => sprintf('"screen%d" RightOf "screen%d"', $_, $_ - 1) } } (2 .. $nb_new)
-    ];
-    @l;
-}
-sub is_fbdev {
-    my ($raw_X, $o_Screen) = @_;
-
-    my $Screen = $o_Screen || $raw_X->get_default_screen or return;
-
-    my $Device = $raw_X->get_Section_by_Identifier('Device', val($Screen->{Device})) or internal_error("no device named $Screen->{Device}");
-    val($Device->{Driver}) eq 'fbdev';
-}
-
-
-
-
-################################################################################
-# modules ######################################################################
-################################################################################
-sub get_modules {
-    my ($raw_X) = @_;
-    my $raw_Module = $raw_X->get_Section('Module') or return;
-    my $Module = raw_export_section($raw_Module, ['Load']);
-    @{$Module->{Load} || []};
-}
-sub add_load_module {
-    my ($raw_X, $module) = @_;
-    my $raw_Module = $raw_X->get_Section('Module') || $raw_X->add_Section('Module', {});
-
-    my %load_modules_comment = (
-	dbe => 'Double-Buffering Extension',
-	v4l => 'Video for Linux',
-	dri => 'direct rendering',
-	glx => '3D layer',
-	'glx-3.so' => '3D layer',
-    );
-    my $comment = $load_modules_comment{$module};
-    push @{$raw_Module->{Load}}, { val => $module,
-				   comment_on_line => $comment && " # $comment",
-				 } if !member($module, $raw_X->get_modules);
-}
-sub remove_load_module {
-    my ($raw_X, $module) = @_;
-    my $raw_Module = $raw_X->get_Section('Module') or return;
-    if (my @l = grep { $_->{val} ne $module } @{$raw_Module->{Load}}) {
-	$raw_Module->{Load} = \@l;
-    } else {
-	$raw_X->remove_Section('Module');
-    }
-}
-sub set_load_module {
-    my ($raw_X, $module, $bool) = @_;
-    $bool ? add_load_module($raw_X, $module) : remove_load_module($raw_X, $module);
-}
-
-
-#-##############################################################################
-#- helpers
-#-##############################################################################
-sub _set_Option {
-    my ($category, $node, @names) = @_;
-    
-    if (member($category, 'keyboard', 'mouse')) {
-	#- everything we export is an Option
-	$_->{Option} = 1 foreach map { deref_array($node->{$_}) } @names;
-    }
-}
-
-sub get_InputDevices {
-    my ($raw_X, $Driver) = @_;
-    $raw_X->get_Sections('InputDevice', sub { val($_[0]{Driver}) eq $Driver });
-}
-sub remove_InputDevices {    
-    my ($raw_X, $Driver) = @_;
-    $raw_X->remove_Section('InputDevice', sub { val($_[0]{Driver}) ne $Driver });
-}
-
-sub get_ServerLayout {
-    my ($raw_X) = @_;
-    $raw_X->get_Section('ServerLayout') ||
-      $raw_X->add_Section('ServerLayout', { Identifier => { val => 'layout1' } });
-}
-
-#-##############################################################################
-#- helpers
-#-##############################################################################
-sub raw_export_section {
-    my ($section, $fields) = @_;
-
-    my $export_name = sub {
-	my ($name) = @_;
-	my $h = $section->{$name} or return;
-
-	my @l = map { if_(!$_->{commented}, $_->{val}) } deref_array($h) or return;    
-	$name => (ref($h) eq 'ARRAY' ? \@l : $l[0]);
-    };
-
-    my %h = map { $export_name->($_) } @$fields;
-    \%h;
-}
-
-sub raw_import_section {
-    my ($section, $h, $o_fields) = @_;
-    foreach ($o_fields ? grep { exists $h->{$_} } @$o_fields : keys %$h) {
-	my @l = map { ref($_) eq 'HASH' ? $_ : { val => $_ } } deref_array($h->{$_});
-	$section->{$_} = (ref($h->{$_}) eq 'ARRAY' ? \@l : $l[0]);
-    }
-}
-
-sub add_Section {
-    my ($raw_X, $Section, $h) = @_;
-    my @suggested_ordering = qw(Files ServerFlags Module DRI Keyboard Pointer XInput InputDevice Monitor Device Screen ServerLayout);
-    my %order = map_index { { lc($_) => $::i } } @suggested_ordering;
-    my $e = { name => $Section, l => $h };
-    my $added;
-    @$raw_X = map { 
-	if ($order{lc $_->{name}} > $order{lc $Section} && !$added) {
-	    $added = 1;
-	    ($e, $_);
-	} else { $_ }
-    } @$raw_X;
-    push @$raw_X, $e if !$added;
-    $h;
-}
-sub remove_Section {
-    my ($raw_X, $Section, $o_when) = @_;
-    @$raw_X = grep { $_->{name} ne $Section || $o_when && $o_when->($_->{l}) } @$raw_X;
-    $raw_X;
-}
-sub get_Sections {
-    my ($raw_X, $Section, $o_when) = @_;
-    map { if_(lc($_->{name}) eq lc($Section) && (!$o_when || $o_when->($_->{l})), $_->{l}) } @$raw_X;
-}
-sub get_Section {
-    my ($raw_X, $Section, $o_when) = @_;
-    my @l = get_Sections($raw_X, $Section, $o_when);
-    @l > 1 and log::l("Xconfig: found more than one Section $Section");
-    $l[0];
-}
-sub get_Section_by_Identifier {
-    my ($raw_X, $Section, $Identifier) = @_;
-    my @l = get_Sections($raw_X, $Section, sub { val($_[0]{Identifier}) eq $Identifier });
-    @l > 1 and die "more than one Section $Section has Identifier $Identifier";
-    $l[0];
-}
-
-sub val {
-    my ($ref) = @_;
-    $ref && $ref->{val};
-}
-
-
-sub ModeLine_from_string {
-    my ($s) = @_;
-    my $raw_X_for_ModeLine = Xconfig::parse::read_XF86Config_from_string($s);
-    get_Section($raw_X_for_ModeLine, 'Monitor')->{ModeLine};
-}
-
-
-
-# http://home.comcast.net/~igpl/Aspect.html
-# movies http://www.technosound.co.uk/nav.php?pageid=hcg_widescreen
-
-# www.dell.com/downloads/global/vectors/2003_cvt.pdf
-# file vesamodes in Xorg is DMT Standard Display Modes
-
-# http://www.vesa.org/Public
-# http://www.vesa.org/Public/EEDIDguideV1.pdf 
-
-#- http://www.vesa.org/Public/CVT
-our @CVT_ratios = qw(4/3 16/9 16/10 5/4 15/9 3/2);
-our @CVT_vfreqs = qw(50 60 75 85); # and also 60Hz "reduced blanking" in CVT
-
-our @vfreqs = (@CVT_vfreqs, qw(100 120));
-
-our %ratio2resolutions = (
-
-    # first all the CVT_ratios
-
-    # 1.25
-    '5/4' => [ qw(640x512 720x576 1280x1024 1800x1440) ],
-		# SXGA=1280x1024
-
-    # 1.33
-    '4/3' => [
-	qw(320x240 480x360 640x480 800x600 832x624 
-	   1024x768 1152x864 1280x960 1400x1050 
-	   1600x1200 1920x1440 2048x1536),
-    ],		# VGA=640x480, SVGA=800x600, XGA=1024x768, SXGA+=1400x1050, UXGA=1600x1200, QXGA=2048x1536
-
-    # 1.5
-    '3/2' => [ qw(360x240 720x480 1152x768) ],
-
-    # 1.6
-    '16/10' => [ qw(1280x800 1440x900 1600x1000 1680x1050 1920x1200) ],
-                # WSXGA+=1680x1050, WUXGA=1920x1200
-
-    # 1.67
-    '15/9' => [ qw(1280x768) ],
-		# WXGA=1280x768 or ??? (should be 1366x768)
-    
-    # 1.78
-    '16/9' => [ qw(1280x720 1600x900 1920x1080) ],
-
-
-    # now more weird things
-
-    # 1.32
-    # '192/145' => [ qw(1152x870) ],
-
-    # 1.42
-    # '17/12' => [ qw(544x384) ] ,
-
-    # 1.56
-    # '25/16' => [ qw(1600x1024) ], # WSXGA
-
-    # 1.775
-    # '71/15' => [ qw(852x480) ],
-
-    N_("_:weird aspect ratio\nother") => [
-	# 2.13 = 32/15
-	qw(1024x480 1280x600), # VAIO
-
-	# 2.67 = 8/3
-	qw(2048x768 2560x960 3200x1200),
-
-	# 4.0 = 4/1
-	qw(3072x768 3456x864 3840x960 4800x1200),
-
-	# ?? 352x288
-    ],
-);
-
-our %resolution2ratio = map_each { map { $_ => $::a } @$::b } %ratio2resolutions;
-our @resolutions = map_each { @$::b } %ratio2resolutions;
-
-foreach my $ratio (keys %ratio2resolutions) {
-    if ($ratio =~ m!^(\d+)/(\d+)$!) {
-	my $eval = $2 / $1;
-	foreach (@{$ratio2resolutions{$ratio}}) {
-	    my ($x, $y) = /(\d+)x(\d+)/;
-	    my $y2 = round($x * $eval);
-	    $y == $y2 or die "bad resolution $_ for ratio $ratio, it should be $x x $y2\n";
-	}
-    }
-}
-
-our $default_header = <<'END';
-# File generated by XFdrake.
-
-# **********************************************************************
-# Refer to the XF86Config man page for details about the format of
-# this file.
-# **********************************************************************
-
-Section "Files"
-    # Multiple FontPath entries are allowed (they are concatenated together)
-    # By default, Mandrake 6.0 and later now use a font server independent of
-    # the X server to render fonts.
-    FontPath "unix/:-1"
-EndSection
-
-Section "ServerFlags"
-    #DontZap # disable <Crtl><Alt><BS> (server abort)
-    #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
-    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
-END
-
-$default_header .= <<'END_XBOX' if is_xbox(); 
-    Option "PciProbe1" "false"
-    Option "PciProbe2" "false"
-    Option "PciForceConfig1" "false"
-    Option "PciForceConfig2" "false"
-    Option "PciOsConfig" "true"
-END_XBOX
-
-$default_header .= <<'END';
-EndSection
-END
-
-our $default_ModeLine = arch() =~ /ppc/ ? <<'END_PPC' : <<'END';
-    # Apple iMac modes
-    ModeLine "1024x768"   78.525 1024 1049 1145 1312   768  769  772  800 +hsync +vsync
-    ModeLine "800x600"    62.357  800  821  901 1040   600  601  604  632 +hsync +vsync
-    ModeLine "640x480"    49.886  640  661  725  832   480  481  484  514 +hsync +vsync
-    # Apple monitors tend to do 832x624
-    ModeLine "832x624"    57      832  876  940 1152   624  625  628  667 -hsync -vsync
-    # Apple PowerBook G3
-    ModeLine "800x600"    100     800  816  824  840   600  616  624  640 -hsync -vsync
-    # Apple TI Powerbook 
-    ModeLine "1152x768"   78.741 1152 1173 1269 1440   768  769  772  800 +vsync +vsync
-    # Pismo Firewire G3   
-    ModeLine "1024x768"   65     1024 1032 1176 1344   768  771  777  806 -hsync -vsync
-    # iBook2
-    ModeLine "1024x768"   65     1024 1048 1184 1344   768  771  777  806 -hsync -vsync
-    # 17" Apple Studio Display
-    ModeLine "1024x768"   112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
-    # HiRes Apple Studio Display
-    ModeLine "1280x1024"  135    1280 1288 1392 1664  1024 1027 1030 1064
-    # Another variation
-    ModeLine "1280x1024"  134.989 1280 1317 1429 1688  1024 1025 1028 1066 +hsync +vsync
-END_PPC
-    # TV fullscreen mode or DVD fullscreen output.
-    # 768x576 @ 79 Hz, 50 kHz hsync
-    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
-    # 768x576 @ 100 Hz, 61.6 kHz hsync
-    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
-END
-
-1;
diff --git a/perl-install/any.pm b/perl-install/any.pm
deleted file mode 100644
index e7a972a0e..000000000
--- a/perl-install/any.pm
+++ /dev/null
@@ -1,1104 +0,0 @@
-package any; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use partition_table;
-use fs::type;
-use lang;
-use run_program;
-use keyboard;
-use devices;
-use modules;
-use log;
-use fs;
-use c;
-
-sub facesdir() {
-    "$::prefix/usr/share/mdk/faces/";
-}
-sub face2png {
-    my ($face) = @_;
-    facesdir() . $face . ".png";
-}
-sub facesnames() {
-    my $dir = facesdir();
-    my @l = grep { /^[A-Z]/ } all($dir);
-    map { if_(/(.*)\.png/, $1) } (@l ? @l : all($dir));
-}
-
-sub addKdmIcon {
-    my ($user, $icon) = @_;
-    my $dest = "$::prefix/usr/share/faces/$user.png";
-    eval { cp_af(facesdir() . $icon . ".png", $dest) } if $icon;
-}
-
-sub alloc_user_faces {
-    my ($users) = @_;
-    my @m = my @l = facesnames();
-    foreach (grep { !$_->{icon} || $_->{icon} eq "automagic" } @$users) {
-	$_->{auto_icon} = splice(@m, rand(@m), 1); #- known biased (see cookbook for better)
-	log::l("auto_icon is $_->{auto_icon}");
-	@m = @l unless @m;
-    }
-}
-
-sub create_user {
-    my ($u, $isMD5) = @_;
-
-    my @existing = stat("$::prefix/home/$u->{name}");
-
-    if (!getpwnam($u->{name})) {
-	my $uid = $u->{uid} || $existing[4];
-	if ($uid && getpwuid($uid)) {
-	    undef $uid; #- suggested uid already in use
-	}
-	my $gid = $u->{gid} || $existing[5] || int getgrnam($u->{name});
-	if ($gid) {
-	    if (getgrgid($gid)) {
-		undef $gid if getgrgid($gid) ne $u->{name};
-	    } else {
-		run_program::rooted($::prefix, 'groupadd', '-g', $gid, $u->{name});
-	    }
-	}
-	require authentication;
-	run_program::raw({ root => $::prefix, sensitive_arguments => 1 },
-			    'adduser', 
-			    '-p', authentication::user_crypted_passwd($u, $isMD5),
-			    if_($uid, '-u', $uid), if_($gid, '-g', $gid), 
-			    if_($u->{realname}, '-c', $u->{realname}),
-			    if_($u->{home}, '-d', $u->{home}),
-			    if_($u->{shell}, '-s', $u->{shell}), 
-			    $u->{name});
-    }
-
-    my (undef, undef, $uid, $gid, undef, undef, undef, $home) = getpwnam($u->{name});
-
-    if (@existing && $::isInstall && ($uid != $existing[4] || $gid != $existing[5])) {
-	log::l("chown'ing $home from $existing[4].$existing[5] to $uid.$gid");
-	require commands;
-	eval { commands::chown_("-r", "$uid.$gid", "$::prefix$home") };
-    }
-}
-
-sub add_users {
-    my ($users, $authentication) = @_;
-
-    alloc_user_faces($users);
-
-    foreach (@$users) {
-	create_user($_, $authentication->{md5});
-	run_program::rooted($::prefix, "usermod", "-G", join(",", @{$_->{groups}}), $_->{name}) if !is_empty_array_ref($_->{groups});
-	addKdmIcon($_->{name}, delete $_->{auto_icon} || $_->{icon});
-    }
-}
-
-sub hdInstallPath() {
-    my $tail = first(readlink("/tmp/image") =~ m|^(?:/tmp/)?hdimage/*(.*)|);
-    my $head = first(readlink("/tmp/hdimage") =~ m|$::prefix(.*)|);
-    log::l("search HD install path, tail=$tail, head=$head, tail defined=" . to_bool(defined $tail));
-    defined $tail && ($head ? "$head/$tail" : "/mnt/hd/$tail");
-}
-
-sub install_acpi_pkgs {
-    my ($do_pkgs, $b) = @_;
-
-    my $acpi = bootloader::get_append_with_key($b, 'acpi');
-    if (!member($acpi, 'off', 'ht')) {
-	$do_pkgs->install('acpi', 'acpid') if !(-x "$::prefix/usr/bin/acpi" && -x "$::prefix/usr/sbin/acpid");
-    }
-}
-
-sub setupBootloader {
-    my ($in, $b, $all_hds, $fstab, $security) = @_;
-
-    require bootloader;
-  general:
-    {
-	local $::Wizard_no_previous = 1 if $::isStandalone;
-	setupBootloader__general($in, $b, $all_hds, $fstab, $security) or return 0;
-    }
-    setupBootloader__boot_bios_drive($in, $b, $all_hds->{hds}) or goto general;
-    {
-	local $::Wizard_finished = 1 if $::isStandalone;
-	setupBootloader__entries($in, $b, $all_hds, $fstab) or goto general;
-    }
-    1;
-}
-
-sub installBootloader {
-    my ($in, $b, $all_hds) = @_;
-    return if is_xbox();
-    install_acpi_pkgs($in->do_pkgs, $b);
-
-    eval { run_program::rooted($::prefix, 'echo | lilo -u') } if $::isInstall && !$::o->{isUpgrade} && -e "$::prefix/etc/lilo.conf" && glob("$::prefix/boot/boot.*");
-
-  retry:
-    eval { 
-	my $_w = $in->wait_message(N("Please wait"), N("Bootloader installation in progress"));
-	bootloader::install($b, $all_hds);
-    };
-
-    if (my $err = $@) {
-	$err =~ /wizcancel/ and return;
-	$err =~ s/^\w+ failed// or die;
-	$err = formatError($err);
-	while ($err =~ s/^Warning:.*//m) {}
-	if (my ($dev) = $err =~ /^Reference:\s+disk\s+"(.*?)".*^Is the above disk an NT boot disk?/ms) {
-	    if ($in->ask_yesorno('',
-formatAlaTeX(N("LILO wants to assign a new Volume ID to drive %s.  However, changing
-the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows error.
-This caution does not apply to Windows 95 or 98, or to NT data disks.
-
-Assign a new Volume ID?", $dev)))) {
-		$b->{force_lilo_answer} = 'n';
-	    } else {
-		$b->{'static-bios-codes'} = 1;
-	    }
-	    goto retry;
-	} else {
-	    $in->ask_warn('', [ N("Installation of bootloader failed. The following error occurred:"), $err ]);
-	    return;
-	}
-    } elsif (arch() =~ /ppc/) {
-	if (detect_devices::get_mac_model() !~ /IBM/) {
-            my $of_boot = bootloader::dev2yaboot($b->{boot});
-	    $in->ask_warn('', N("You may need to change your Open Firmware boot-device to\n enable the bootloader.  If you do not see the bootloader prompt at\n reboot, hold down Command-Option-O-F at reboot and enter:\n setenv boot-device %s,\\\\:tbxi\n Then type: shut-down\nAt your next boot you should see the bootloader prompt.", $of_boot));
-	}
-    }
-    1;
-}
-
-
-sub setupBootloader_simple {
-    my ($in, $b, $all_hds, $fstab, $security) = @_;
-    my $hds = $all_hds->{hds};
-
-    require bootloader;
-    my $mixed_kind_of_disks = bootloader::mixed_kind_of_disks($hds);
-    #- full expert questions when there is 2 kind of disks
-    #- it would need a semi_auto asking on which drive the bios boots...
-
-    $mixed_kind_of_disks || $b->{bootUnsafe} || arch() =~ /ppc/ or return 1; #- default is good enough
-    
-    if (!$mixed_kind_of_disks && arch() !~ /ia64/) {
-	setupBootloader__mbr_or_not($in, $b, $hds, $fstab) or return 0;
-    } else {
-      general:
-	setupBootloader__general($in, $b, $all_hds, $fstab, $security) or return 0;
-    }
-    setupBootloader__boot_bios_drive($in, $b, $hds) or goto general;
-    1;
-}
-
-
-sub setupBootloader__boot_bios_drive {
-    my ($in, $b, $hds) = @_;
-
-    bootloader::mixed_kind_of_disks($hds) && 
-      $b->{boot} =~ /\d$/ && #- on a partition
-	is_empty_hash_ref($b->{bios}) && #- some bios mapping already there
-	  arch() !~ /ppc/ or return 1;
-
-    log::l("mixed_kind_of_disks");
-    my $hd = $in->ask_from_listf('', N("You decided to install the bootloader on a partition.
-This implies you already have a bootloader on the hard drive you boot (eg: System Commander).
-
-On which drive are you booting?"), \&partition_table::description, $hds) or return 0;
-    log::l("mixed_kind_of_disks chosen $hd->{device}");
-    $b->{first_hd_device} = "/dev/$hd->{device}";
-    1;
-}
-
-sub setupBootloader__mbr_or_not {
-    my ($in, $b, $hds, $fstab) = @_;
-
-    if (arch() =~ /ppc/) {
-	if (defined $partition_table::mac::bootstrap_part) {
-	    $b->{boot} = $partition_table::mac::bootstrap_part;
-	    log::l("set bootstrap to $b->{boot}"); 
-	} else {
-	    die "no bootstrap partition - yaboot.conf creation failed";
-	}
-    } else {
-	my $floppy = detect_devices::floppy();
-
-	my @l = (
-		 [ N("First sector of drive (MBR)") => '/dev/' . $hds->[0]{device} ],
-		 [ N("First sector of the root partition") => '/dev/' . fs::get::root($fstab, 'boot')->{device} ],
-		     if_($floppy, 
-                 [ N("On Floppy") => "/dev/$floppy" ],
-		     ),
-		 [ N("Skip") => '' ],
-		);
-
-	my $default = find { $_->[1] eq $b->{boot} } @l;
-	$in->ask_from_({ title => N("LILO/grub Installation"),
-			 messages => N("Where do you want to install the bootloader?"),
-			 interactive_help_id => 'setupBootloaderBeginner',
-		       },
-		      [ { val => \$default, list => \@l, format => sub { $_[0][0] }, type => 'list' } ]);
-	my $new_boot = $default->[1] or return;
-
-	#- remove bios mapping if the user changed the boot device
-	delete $b->{bios} if $new_boot ne $b->{boot};
-	$b->{boot} = $new_boot;
-    }
-    1;
-}
-
-sub setupBootloader__general {
-    my ($in, $b, $all_hds, $fstab, $security) = @_;
-
-    return if is_xbox();
-    my @method_choices = bootloader::method_choices($fstab);
-    my $prev_force_acpi = my $force_acpi = bootloader::get_append_with_key($b, 'acpi') !~ /off|ht/;
-    my $prev_force_noapic = my $force_noapic = bootloader::get_append_simple($b, 'noapic');
-    my $prev_force_nolapic = my $force_nolapic = bootloader::get_append_simple($b, 'nolapic');
-    my $memsize = bootloader::get_append_memsize($b);
-    my $prev_clean_tmp = my $clean_tmp = any { $_->{mntpoint} eq '/tmp' } @{$all_hds->{special} ||= []};
-    my $prev_boot = $b->{boot};
-
-    $b->{password2} ||= $b->{password} ||= '';
-    $::Wizard_title = N("Boot Style Configuration");
-    if (arch() !~ /ppc/) {
-	$in->ask_from_({ messages => N("Bootloader main options"),
-			 interactive_help_id => 'setupBootloader',
-			 callbacks => {
-			     complete => sub {
-				 !$memsize || $memsize =~ /^\d+K$/ || $memsize =~ s/^(\d+)M?$/$1M/i or $in->ask_warn('', N("Give the ram size in MB")), return 1;
-				 #- $security > 4 && length($b->{password}) < 6 and $in->ask_warn('', N("At this level of security, a password (and a good one) in lilo is requested")), return 1;
-				 $b->{restricted} && !$b->{password} and $in->ask_warn('', N("Option ``Restrict command line options'' is of no use without a password")), return 1;
-				 $b->{password} eq $b->{password2} or !$b->{restricted} or $in->ask_warn('', [ N("The passwords do not match"), N("Please try again") ]), return 1;
-				 0;
-			     },
-			 },
-		       }, [
-            { label => N("Bootloader to use"), val => \$b->{method}, list => \@method_choices, format => \&bootloader::method2text },
-                if_(arch() !~ /ia64/,
-            { label => N("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_->{device}" } bootloader::allowed_boot_parts($b, $all_hds) ], not_edit => !$::expert },
-		),
-            { label => N("Delay before booting default image"), val => \$b->{timeout} },
-            { text => N("Enable ACPI"), val => \$force_acpi, type => 'bool' },
-		if_(!$force_nolapic,
-            { text => N("Force no APIC"), val => \$force_noapic, type => 'bool' }, 
-	        ),
-            { text => N("Force No Local APIC"), val => \$force_nolapic, type => 'bool' },
-		if_($security >= 4 || $b->{password} || $b->{restricted},
-            { label => N("Password"), val => \$b->{password}, hidden => 1 },
-            { label => N("Password (again)"), val => \$b->{password2}, hidden => 1 },
-            { text => N("Restrict command line options"), val => \$b->{restricted}, type => "bool", text => N("restrict") },
-		),
-            { text => N("Clean /tmp at each boot"), val => \$clean_tmp, type => 'bool', advanced => 1 },
-            { label => N("Precise RAM size if needed (found %d MB)", availableRamMB()), val => \$memsize, advanced => 1 },
-        ]) or return 0;
-    } else {
-	$b->{boot} = $partition_table::mac::bootstrap_part;	
-	$in->ask_from_({ messages => N("Bootloader main options"),
-			 interactive_help_id => 'setupYabootGeneral',
-		       }, [
-            { label => N("Bootloader to use"), val => \$b->{method}, list => \@method_choices, format => \&bootloader::method2text },
-            { label => N("Init Message"), val => \$b->{'init-message'} },
-            { label => N("Boot device"), val => \$b->{boot}, list => [ map { "/dev/$_" } (map { $_->{device} } (grep { isAppleBootstrap($_) } @$fstab)) ], not_edit => !$::expert },
-            { label => N("Open Firmware Delay"), val => \$b->{delay} },
-            { label => N("Kernel Boot Timeout"), val => \$b->{timeout} },
-            { label => N("Enable CD Boot?"), val => \$b->{enablecdboot}, type => "bool" },
-            { label => N("Enable OF Boot?"), val => \$b->{enableofboot}, type => "bool" },
-            { label => N("Default OS?"), val => \$b->{defaultos}, list => [ 'linux', 'macos', 'macosx', 'darwin' ] },
-        ]) or return 0;				
-    }
-
-    #- remove bios mapping if the user changed the boot device
-    delete $b->{bios} if $b->{boot} ne $prev_boot;
-
-    if ($b->{boot} =~ m!/dev/md\d+$!) {
-	$b->{'raid-extra-boot'} = 'mbr';
-    } else {
-	delete $b->{'raid-extra-boot'} if $b->{'raid-extra-boot'} eq 'mbr';
-    }
-
-    if ($b->{method} eq 'grub') {
-	$in->do_pkgs->ensure_binary_is_installed('grub', "grub", 1) or return 0;
-    }
-
-    bootloader::set_append_memsize($b, $memsize);
-    if ($prev_force_acpi != $force_acpi) {
-	bootloader::set_append_with_key($b, acpi => ($force_acpi ? '' : 'ht'));
-    }
-    if ($prev_force_noapic != $force_noapic) {
-	($force_noapic ? \&bootloader::set_append_simple : \&bootloader::remove_append_simple)->($b, 'noapic');
-    }
-    if ($prev_force_nolapic != $force_nolapic) {
-	($force_nolapic ? \&bootloader::set_append_simple : \&bootloader::remove_append_simple)->($b, 'nolapic');
-    }
-
-    if ($prev_clean_tmp != $clean_tmp) {
-	if ($clean_tmp && !fs::get::has_mntpoint('/tmp', $all_hds)) {
-	    push @{$all_hds->{special}}, { device => 'none', mntpoint => '/tmp', fs_type => 'tmpfs' };
-	} else {
-	    @{$all_hds->{special}} = grep { $_->{mntpoint} ne '/tmp' } @{$all_hds->{special}};
-	}
-    }
-    1;
-}
-
-sub setupBootloader__entries {
-    my ($in, $b, $_all_hds, $fstab) = @_;
-
-    require Xconfig::resolution_and_depth;
-
-    my $Modify = sub {
-	require network::netconnect; #- to list network profiles
-	my ($e) = @_;
-	my $default = my $old_default = $e->{label} eq $b->{default};
-	my $vga = Xconfig::resolution_and_depth::from_bios($e->{vga});
-	my ($append, $netprofile) = bootloader::get_append_netprofile($e);
-
-	my @l;
-	if ($e->{type} eq "image") { 
-	    @l = (
-{ label => N("Image"), val => \$e->{kernel_or_dev}, list => [ map { "/boot/$_" } bootloader::installed_vmlinuz() ], not_edit => 0 },
-{ label => N("Root"), val => \$e->{root}, list => [ map { "/dev/$_->{device}" } @$fstab ], not_edit => !$::expert },
-{ label => N("Append"), val => \$append },
-  if_(arch() !~ /ppc|ia64/,
-{ label => N("Video mode"), val => \$vga, list => [ '', Xconfig::resolution_and_depth::bios_vga_modes() ], format => \&Xconfig::resolution_and_depth::to_string, advanced => 1 },
-),
-{ label => N("Initrd"), val => \$e->{initrd}, list => [ map { if_(/^initrd/, "/boot/$_") } all("$::prefix/boot") ], not_edit => 0, advanced => 1 },
-{ label => N("Network profile"), val => \$netprofile, list => [ sort(uniq('', $netprofile, network::netconnect::get_profiles())) ], advanced => 1 },
-	    );
-	} else {
-	    @l = ( 
-{ label => N("Root"), val => \$e->{kernel_or_dev}, list => [ map { "/dev/$_->{device}" } @$fstab, detect_devices::floppies() ], not_edit => !$::expert },
-	    );
-	}
-	if (arch() !~ /ppc/) {
-	    @l = (
-		  { label => N("Label"), val => \$e->{label} },
-		  @l,
-		  { text => N("Default"), val => \$default, type => 'bool' },
-		 );
-	} else {
-	    unshift @l, { label => N("Label"), val => \$e->{label}, list => ['macos', 'macosx', 'darwin'] };
-	    if ($e->{type} eq "image") {
-		@l = ({ label => N("Label"), val => \$e->{label} },
-		$::expert ? @l[1..4] : (@l[1..2], { label => N("Append"), val => \$append }),
-		if_($::expert, { label => N("Initrd-size"), val => \$e->{initrdsize}, list => [ '', '4096', '8192', '16384', '24576' ] }),
-		if_($::expert, $l[5]),
-		{ label => N("NoVideo"), val => \$e->{novideo}, type => 'bool' },
-		{ text => N("Default"), val => \$default, type => 'bool' }
-		);
-	    }
-	}
-
-	$in->ask_from_(
-	    {
-	     interactive_help_id => arch() =~ /ppc/ ? 'setupYabootAddEntry' : 'setupBootloaderAddEntry',
-	     callbacks => {
-	       complete => sub {
-		   $e->{label} or $in->ask_warn('', N("Empty label not allowed")), return 1;
-		   $e->{kernel_or_dev} or $in->ask_warn('', $e->{type} eq 'image' ? N("You must specify a kernel image") : N("You must specify a root partition")), return 1;
-		   member(lc $e->{label}, map { lc $_->{label} } grep { $_ != $e } @{$b->{entries}}) and $in->ask_warn('', N("This label is already used")), return 1;
-		   0;
-	       } } }, \@l) or return;
-
-	$b->{default} = $old_default || $default ? $default && $e->{label} : $b->{default};
-	$e->{vga} = ref($vga) ? $vga->{bios} : $vga;
-	bootloader::set_append_netprofile($e, $append, $netprofile);
-	bootloader::configure_entry($e); #- hack to make sure initrd file are built.
-	1;
-    };
-
-    my $Add = sub {
-	my @labels = map { $_->{label} } @{$b->{entries}};
-	my ($e, $prefix);
-	if ($in->ask_from_list_('', N("Which type of entry do you want to add?"),
-				[ N_("Linux"), arch() =~ /sparc/ ? N_("Other OS (SunOS...)") : arch() =~ /ppc/ ? 
-				  N_("Other OS (MacOS...)") : N_("Other OS (Windows...)") ]
-			       ) eq "Linux") {
-	    $e = { type => 'image',
-		   root => '/dev/' . fs::get::root($fstab)->{device}, #- assume a good default.
-		 };
-	    $prefix = "linux";
-	} else {
-	    $e = { type => 'other' };
-	    $prefix = arch() =~ /sparc/ ? "sunos" : arch() =~ /ppc/ ? "macos" : "windows";
-	}
-	$e->{label} = $prefix;
-	for (my $nb = 0; member($e->{label}, @labels); $nb++) {
-	    $e->{label} = "$prefix-$nb";
-	}
-	$Modify->($e) or return;
-	bootloader::add_entry($b, $e);
-	$e;
-    };
-
-    my $Remove = sub {
-	my ($e) = @_;
-	delete $b->{default} if $b->{default} eq $e->{label};
-	@{$b->{entries}} = grep { $_ != $e } @{$b->{entries}};
-	1;
-    };
-
-    my @prev_entries = @{$b->{entries}};
-    if ($in->ask_from__add_modify_remove('',
-N("Here are the entries on your boot menu so far.
-You can create additional entries or change the existing ones."), [ { 
-        format => sub {
-	    my ($e) = @_;
-	    ref($e) ? 
-	      "$e->{label} ($e->{kernel_or_dev})" . ($b->{default} eq $e->{label} && "  *") : 
-		translate($e);
-	}, list => $b->{entries},
-    } ], Add => $Add, Modify => $Modify, Remove => $Remove)) {
-	1;
-    } else {
-	@{$b->{entries}} = @prev_entries;
-	'';
-    }
-}
-
-sub get_autologin() {
-    my %desktop = getVarsFromSh("$::prefix/etc/sysconfig/desktop");
-    my $desktop = $desktop{DESKTOP} || 'KDE';
-    my $autologin = do {
-	if (($desktop{DISPLAYMANAGER} || $desktop) eq 'GNOME') {
-	    my %conf = read_gnomekderc("$::prefix/etc/X11/gdm/gdm.conf", 'daemon');
-	    text2bool($conf{AutomaticLoginEnable}) && $conf{AutomaticLogin};
-	} else { # KDM / MdkKDM
-	    my %conf = read_gnomekderc("$::prefix/usr/share/config/kdm/kdmrc", 'X-:0-Core');
-	    text2bool($conf{AutoLoginEnable}) && $conf{AutoLoginUser};
-	}
-    };
-    { autologin => $autologin, desktop => $desktop };
-}
-
-sub set_autologin {
-    my ($o_user, $o_wm) = @_;
-    log::l("set_autologin $o_user $o_wm");
-    my $autologin = bool2text($o_user);
-
-    #- Configure KDM / MDKKDM
-    eval { update_gnomekderc("$::prefix/usr/share/config/kdm/kdmrc", 'X-:0-Core' => (
-	AutoLoginEnable => $autologin,
-	AutoLoginUser => $o_user,
-    )) };
-
-    #- Configure GDM
-    eval { update_gnomekderc("$::prefix/etc/X11/gdm/gdm.conf", daemon => (
-	AutomaticLoginEnable => $autologin,
-	AutomaticLogin => $o_user,
-    )) };
-  
-    my $xdm_autologin_cfg = "$::prefix/etc/sysconfig/autologin";
-    if (member($o_wm, 'KDE', 'GNOME')) {
-	unlink $xdm_autologin_cfg;
-    } else {
-	setVarsInShMode($xdm_autologin_cfg, 0644,
-			{ USER => $o_user, AUTOLOGIN => bool2yesno($o_user), EXEC => '/usr/X11R6/bin/startx.autologin' });
-    }
-
-    if ($o_user) {
-	my $home = (getpwnam($o_user))[7];
-	set_window_manager($home, $o_wm);
-    }
-}
-sub set_window_manager {
-    my ($home, $wm) = @_;
-    log::l("set_window_manager $home $wm");
-    my $p_home = "$::prefix$home";
-
-    #- for KDM/GDM
-    my $wm_number = sessions_with_order()->{$wm} || '';
-    update_gnomekderc("$p_home/.dmrc", 'Desktop', Session => "$wm_number$wm");
-    my $user = find { $home eq $_->[7] } list_passwd();
-    chown($user->[2], $user->[3], "$p_home/.dmrc");
-
-    #- for startx/autologin
-    {
-	my %l = getVarsFromSh("$p_home/.desktop");
-	$l{DESKTOP} = $wm;
-	setVarsInSh("$p_home/.desktop", \%l);
-    }
-}
-
-sub rotate_log {
-    my ($f) = @_;
-    if (-e $f) {
-	my $i = 1;
-	for (; -e "$f$i" || -e "$f$i.gz"; $i++) {}
-	rename $f, "$f$i";
-    }
-}
-sub rotate_logs {
-    my ($prefix) = @_;
-    rotate_log("$prefix/root/drakx/$_") foreach qw(ddebug.log install.log);
-}
-
-sub writeandclean_ldsoconf {
-    my ($prefix) = @_;
-    my $file = "$prefix/etc/ld.so.conf";
-    my @l = chomp_(cat_($file));
-
-    my @default = ('/lib', '/usr/lib'); #- no need to have /lib and /usr/lib in ld.so.conf
-    my @suggest = ('/usr/X11R6/lib', '/usr/lib/qt3/lib'); #- needed for upgrade where package renaming can cause this to disappear
-
-    if (arch() =~ /x86_64/) {
-	push @default, map { $_, $_ . '64' } @default;
-	push @suggest, map { $_, $_ . '64' } @suggest;
-    }
-    push @l, grep { -d "$::prefix$_" } @suggest;
-    @l = difference2(\@l, \@default);
-
-    output($file, map { "$_\n" } uniq(@l));
-}
-
-sub shells() {
-    grep { -x "$::prefix$_" } chomp_(cat_("$::prefix/etc/shells"));
-}
-
-sub inspect {
-    my ($part, $o_prefix, $b_rw) = @_;
-
-    isMountableRW($part) || !$b_rw && isOtherAvailableFS($part) or return;
-
-    my $dir = $::isInstall ? "/tmp/inspect_tmp_dir" : "/root/.inspect_tmp_dir";
-
-    if ($part->{isMounted}) {
-	$dir = ($o_prefix || '') . $part->{mntpoint};
-    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
-	$dir = '';
-    } else {
-	mkdir $dir, 0700;
-	eval { fs::mount(devices::make($part->{device}), $dir, $part->{fs_type}, !$b_rw) };
-	$@ and return;
-    }
-    my $h = before_leaving {
-	if (!$part->{isMounted} && $dir) {
-	    fs::umount($dir);
-	    unlink($dir);
-	}
-    };
-    $h->{dir} = $dir;
-    $h;
-}
-
-sub ask_user_one {
-    my ($in, $users, $security, $u, %options) = @_;
-
-    my @icons = facesnames();
-
-    my %high_security_groups = (
-        xgrp => N("access to X programs"),
-	rpm => N("access to rpm tools"),
-	wheel => N("allow \"su\""),
-	adm => N("access to administrative files"),
-	ntools => N("access to network tools"),
-	ctools => N("access to compilation tools"),
-    );
-
-    $u->{password2} ||= $u->{password} ||= '';
-    $u->{shell} ||= '/bin/bash';
-    my $names = @$users ? N("(already added %s)", join(", ", map { $_->{realname} || $_->{name} } @$users)) : '';
-    
-    my %groups;
-    my $verif = sub {
-        $u->{password} eq $u->{password2} or $in->ask_warn('', [ N("The passwords do not match"), N("Please try again") ]), return 1,2;
-        $security > 3 && length($u->{password}) < 6 and $in->ask_warn('', N("This password is too simple")), return 1,2;
-	    $u->{name} or $in->ask_warn('', N("Please give a user name")), return 1,0;
-        $u->{name} =~ /^[a-z]+?[a-z0-9_-]*?$/ or $in->ask_warn('', N("The user name must contain only lower cased letters, numbers, `-' and `_'")), return 1,0;
-        length($u->{name}) <= 32 or $in->ask_warn('', N("The user name is too long")), return 1,0;
-        member($u->{name}, 'root', map { $_->{name} } @$users) and $in->ask_warn('', N("This user name has already been added")), return 1,0;
-        return 0;
-    };
-    my $ret = $in->ask_from_(
-        { title => N("Add user"),
-          messages => N("Enter a user\n%s", $options{additional_msg} || $names),
-          interactive_help_id => 'addUser',
-          focus_first => 1,
-          if_(!$::isInstall, ok => N("Done")),
-          cancel => $options{noaccept} ? '' : N("Accept user"),
-          callbacks => {
-	          focus_out => sub {
-		      if ($_[0] eq '0') {
-			  $u->{name} ||= lc first($u->{realname} =~ /([a-zA-Z0-9_-]+)/);
-		      }
-		  },
-	          complete => sub { $u->{name} ? &$verif : 0 },
-                  canceled => $verif,
-                  ok_disabled => sub { $security >= 4 && !@$users || $options{needauser} && !$u->{name} },
-	  } }, [ 
-	  { label => N("Real name"), val => \$u->{realname} },
-          { label => N("Login name"), val => \$u->{name} },
-          { label => N("Password"),val => \$u->{password}, hidden => 1 },
-          { label => N("Password (again)"), val => \$u->{password2}, hidden => 1 },
-          { label => N("Shell"), val => \$u->{shell}, list => [ shells() ], not_edit => !$::expert, advanced => 1 },
-	    if_($security <= 3 && !$options{noicons} && @icons,
-	  { label => N("Icon"), val => \ ($u->{icon} ||= 'default'), list => \@icons, icon2f => \&face2png, format => \&translate },
-	    ),
-	    if_($security > 3,
-                map {
-                    { label => $_, val => \$groups{$_}, text => $high_security_groups{$_}, type => 'bool' };
-                } keys %high_security_groups,
-               ),
-               ],
-                            );
-    $u->{groups} = [ grep { $groups{$_} } keys %groups ];
-
-    push @$users, $u if $u->{name};
-
-    return $ret;
-}
-
-sub ask_users {
-    my ($in, $users, $security, $suggested_names) = @_;
-
-    while (1) {
-	my $u = {};
-	$u->{name} = shift @$suggested_names;
-        ask_user_one($in, $users, $security, $u) and return;
-    }
-}
-
-sub sessions() {
-    split(' ', run_program::rooted_get_stdout($::prefix, '/usr/sbin/chksession', '-l'));
-}
-sub sessions_with_order() {
-    my %h = map { /(.*)=(.*)/ } split(' ', run_program::rooted_get_stdout($::prefix, '/usr/sbin/chksession', '-L'));
-    \%h;
-}
-
-sub autologin {
-    my ($o, $in) = @_;
-
-    my @wm = sessions();
-    my @users = map { $_->{name} } @{$o->{users} || []};
-
-    if (member('KDE', @wm) && @users == 1 && $o->{meta_class} eq 'desktop') {
-	$o->{desktop} = 'KDE';
-	$o->{autologin} = $users[0];
-    } elsif (@wm > 1 && @users && !$o->{authentication}{NIS} && $o->{security} <= 2) {
-	my $use_autologin = bool2yesno(@users == 1);
-
-	$in->ask_from_(
-		       { title => N("Autologin"),
-			 messages => N("I can set up your computer to automatically log on one user.") },
-		       [ { label => N("Do you want to use this feature?"), val => \$use_autologin, type => 'list', list => [ N_("Yes"), N("No") ],
-                     format => sub { translate($_[0]) },  gtk => { use_boxradio => 1 } },
-			 { label => N("Choose the default user:"), val => \$o->{autologin}, list => \@users, disabled => sub { !$use_autologin } },
-			 { label => N("Choose the window manager to run:"), val => \$o->{desktop}, list => \@wm, disabled => sub { !$use_autologin } } ]
-		      );
-	$use_autologin = to_bool($use_autologin);
-	delete $o->{autologin} if !$use_autologin;
-    } else {
-	delete $o->{autologin};
-    }
-}
-
-
-sub selectLanguage {
-    my ($in, $lang, $o_langs_) = @_;
-
-    my $common = { messages => N("Please choose a language to use."),
-		   title => N("Language choice"),
-		   interactive_help_id => 'selectLanguage' };
-
-    if ($::isInstall) {
-	my $langs = $o_langs_ || {};
-	my $using_images = $in->isa('interactive::gtk') && !$in->{vga16};
-	
-	my %name2l = map { lang::l2name($_) => $_ } lang::list_langs();
-	my $listval2val = sub { $_[0] =~ /\|(.*)/ ? $1 : $_[0] };
-
-	#- since gtk version will use images (function image2f) we need to sort differently
-	my $sort_func = $using_images ? \&lang::l2transliterated : \&lang::l2name;
-	my @langs = sort { $sort_func->($a) cmp $sort_func->($b) } lang::list_langs();
-	if (@langs > 15) {
-	    my $add_location = sub {
-		my ($l) = @_;
-		map { "$_|$l" } lang::l2location($l);
-	    };
-	    @langs = map { $add_location->($_) } @langs;
-
-	    #- to create the default value, use the first location for that value :/
-	    $lang = first($add_location->($lang));
-	}
-
-        my $last_utf8 = $in->{locale}{utf8};
-	add2hash($common, { cancel => '',
-			    advanced_messages => formatAlaTeX(N("Mandriva Linux can support multiple languages. Select
-the languages you would like to install. They will be available
-when your installation is complete and you restart your system.")),
-			    advanced_state => 1,
-			    callbacks => { advanced => sub { $langs->{$listval2val->($lang)} = 1 },
-                                           changed => sub {
-                                               if ($last_utf8 == $in->{locale}{utf8}) {
-                                                   $last_utf8 = $in->{locale}{utf8} = lang::utf8_should_be_needed({ lang => $listval2val->($lang), langs => $langs });
-                                               } else {
-                                                   $last_utf8 = -1;  #- disable auto utf8 once touched
-                                               }
-                                           } } });
-			    
-	$in->ask_from_($common,
-	[ { val => \$lang, separator => '|', 
-	    if_($using_images, image2f => sub { $name2l{$_[0]} =~ /^[a-z]/ ? ('', "langs/lang-$name2l{$_[0]}") : $_[0] }),
-	    format => sub { $_[0] =~ /(.*\|)(.*)/ ? $1 . lang::l2name($2) : lang::l2name($_[0]) },
-	    list => \@langs, sort => 0 },
-	    if_($o_langs_ && !$::move,
-                { val => \$in->{locale}{utf8}, type => 'bool', text => N("Use Unicode by default"), advanced => 1 },
-		{ val => \$langs->{all}, type => 'bool', text => N("All languages"), advanced => 1 },
-	        map {
-		  { val => \$langs->{$_->[0]}, type => 'bool', disabled => sub { $langs->{all} },
-		    text => $_->[1], advanced => 1,
-		    image => "langs/lang-$_->[0]",
-		  }; 
-	      } sort { $a->[1] cmp $b->[1] } map { [ $_, $sort_func->($_) ] } lang::list_langs())
-	]) or return;
-	$langs->{$listval2val->($lang)} = 1;
-	$langs->{$_} or delete $langs->{$_} foreach keys %$langs;  #- clean hash
-	
-	#- convert to the default locale for asked language
-	$listval2val->($lang);
-
-    } else {
-	my @langs = sort { lang::l2name($a) cmp lang::l2name($b) } lang::list_langs(exclude_non_installed => 1);
-	die 'one lang only' if @langs == 1;
-	$in->ask_from_($common,
-		       [ { val => \$lang, type => 'list',
-                     format => sub { lang::l2name($_[0]) }, list => \@langs },
-                   { val => \$in->{locale}{utf8}, type => 'bool', text => N("Use Unicode by default"), advanced => 1 },
-               ]) or return;
-	$lang;
-    }
-}
-
-sub selectCountry {
-    my ($in, $locale) = @_;
-
-    my $country = $locale->{country};
-    my @countries = lang::list_countries(exclude_non_installed => !$::isInstall);
-    my @best = uniq map {
-	my $h = lang::analyse_locale_name($_);
-	if_($h->{main} eq lang::locale_to_main_locale($locale->{lang}) && $h->{country},
-	    $h->{country});
-    } @lang::locales;
-    @best == 1 and @best = ();
-
-    my ($other, $ext_country);
-    member($country, @best) or ($ext_country, $country) = ($country, $ext_country);
-    $in->ask_from_(
-		  { title => N("Country / Region"), 
-		    messages => N("Please choose your country."),
-		    interactive_help_id => 'selectCountry',
-		    if_(@best, advanced_messages => N("Here is the full list of available countries")),
-		    advanced_label => @best ? N("Other Countries") : N("Advanced"),
-		    advanced_state => $ext_country && scalar(@best),
-		    callbacks => { changed => sub { $_[0] != 2 and $other = $_[0] == 1 } },
-		  },
-		  [ if_(@best, { val => \$country, type => 'list', format => \&lang::c2name,
-				 list => \@best, sort => 1 }),
-		    { val => \$ext_country, type => 'list', format => \&lang::c2name,
-		      list => [ @countries ], advanced => scalar(@best) },
-		    { val => \$locale->{IM}, type => 'combo', label => N("Input method:"), sort => 0, 
-		      list => [ N_("None"), sort(lang::get_ims()) ], format => sub { uc(translate($_[0])) },
-                advanced => !$locale->{IM} || $locale->{IM} eq 'None',
-              },
-		  ]) or return;
-
-    $locale->{country} = $other || !@best ? $ext_country : $country;
-}
-
-sub set_login_serial_console {
-    my ($port, $speed) = @_;
-
-    my $line = "s$port:12345:respawn:/sbin/getty ttyS$port DT$speed ansi\n";
-    substInFile { s/^s$port:.*//; $_ = $line if eof } "$::prefix/etc/inittab";
-}
-
-sub report_bug {
-    my (@other) = @_;
-
-    sub header { "
-********************************************************************************
-* $_[0]
-********************************************************************************";
-    }
-
-    join '', map { chomp; "$_\n" }
-      header("lspci"), detect_devices::stringlist(),
-      header("pci_devices"), cat_("/proc/bus/pci/devices"),
-      header("dmidecode"), `$ENV{LD_LOADER} dmidecode`,
-      header("fdisk"), arch() =~ /ppc/ ? `$ENV{LD_LOADER} pdisk -l` : `$ENV{LD_LOADER} fdisk -l`,
-      header("scsi"), cat_("/proc/scsi/scsi"),
-      header("/sys/bus/scsi/devices"), `ls -l /sys/bus/scsi/devices`,
-      header("lsmod"), cat_("/proc/modules"),
-      header("cmdline"), cat_("/proc/cmdline"),
-      header("pcmcia: stab"), cat_("$::prefix/var/lib/pcmcia/stab") || cat_("$::prefix/var/run/stab"),
-      header("usb"), cat_("/proc/bus/usb/devices"),
-      header("partitions"), cat_("/proc/partitions"),
-      header("cpuinfo"), cat_("/proc/cpuinfo"),
-      header("syslog"), cat_("/tmp/syslog") || cat_("$::prefix/var/log/syslog"),
-      header("monitor_full_edid"), monitor_full_edid(),
-      header("stage1.log"), cat_("/tmp/stage1.log") || cat_("$::prefix/root/drakx/stage1.log"),
-      header("ddebug.log"), cat_("/tmp/ddebug.log") || cat_("$::prefix/root/drakx/ddebug.log"),
-      header("install.log"), cat_("$::prefix/root/drakx/install.log"),
-      header("fstab"), cat_("$::prefix/etc/fstab"),
-      header("modules.conf"), cat_("$::prefix/etc/modules.conf"),
-      header("lilo.conf"), cat_("$::prefix/etc/lilo.conf"),
-      header("menu.lst"), cat_("$::prefix/boot/grub/menu.lst"),
-      header("XF86Config"), cat_("$::prefix/etc/X11/XF86Config"),
-      header("/etc/modules"), cat_("$::prefix/etc/modules"),
-      header("sysconfig/i18n"), cat_("$::prefix/etc/sysconfig/i18n"),
-      map_index { even($::i) ? header($_) : $_ } @other;
-}
-
-sub devfssymlinkf {
-    my ($if_struct, $of) = @_;
-    my $if = $if_struct->{device};
-
-    my $devfs_if = $if_struct->{devfs_device};
-    $devfs_if ||= devices::to_devfs($if);
-    $devfs_if ||= $if;
-
-    #- example: $of is mouse, $if is usbmouse, $devfs_if is input/mouse0
-
-    output_p("$::prefix/etc/devfs/conf.d/$of.conf", 
-"REGISTER	^$devfs_if\$	CFUNCTION GLOBAL mksymlink $devfs_if $of
-UNREGISTER	^$devfs_if\$	CFUNCTION GLOBAL unlink $of
-");
-
-    output_p("$::prefix/etc/devfs/conf.d/$if.conf", 
-"REGISTER	^$devfs_if\$	CFUNCTION GLOBAL mksymlink $devfs_if $if
-UNREGISTER	^$devfs_if\$	CFUNCTION GLOBAL unlink $if
-") if $devfs_if ne $if && $if !~ /^hd[a-z]/ && $if !~ /^sr/ && $if !~ /^sd[a-z]/;
-
-    output_p("$::prefix/etc/udev/rules.d/$of.rules", qq(KERNEL="$if", SYMLINK="$of"\n));
-
-    #- when creating a symlink on the system, use devfs name if devfs is mounted
-    symlinkf($devfs_if, "$::prefix/dev/$if") if $devfs_if ne $if && detect_devices::dev_is_devfs();
-    symlinkf($if, "$::prefix/dev/$of");
-}
-sub devfs_rawdevice {
-    my ($if_struct, $of) = @_;
-
-    my $devfs_if = $if_struct->{devfs_device};
-    $devfs_if ||= devices::to_devfs($if_struct->{device});
-    $devfs_if ||= $if_struct->{device};
-
-    output_p("$::prefix/etc/devfs/conf.d/$of.conf", 
-"REGISTER	^$devfs_if\$	EXECUTE /etc/dynamic/scripts/rawdevice.script add /dev/$devfs_if /dev/$of
-UNREGISTER	^$devfs_if\$	EXECUTE /etc/dynamic/scripts/rawdevice.script del /dev/$of
-");
-}
-
-sub fix_broken_alternatives {
-    my ($force_default) = @_;
-    #- fix bad update-alternatives that may occurs after upgrade (and sometimes for install too).
-    -d "$::prefix/etc/alternatives" or return;
-
-    foreach (all("$::prefix/etc/alternatives")) {
-	if ($force_default) {
-	    log::l("setting alternative $_");
-	} else {
-	    next if run_program::rooted($::prefix, 'test', '-e', "/etc/alternatives/$_");
-	    log::l("fixing broken alternative $_");
-	}
-	run_program::rooted($::prefix, 'update-alternatives', '--auto', $_);
-    }
-}
-
-
-sub fileshare_config {
-    my ($in, $type) = @_; #- $type is 'nfs', 'smb' or ''
-
-    my $file = '/etc/security/fileshare.conf';
-    my %conf = getVarsFromSh($file);
-
-    my @l = (N_("No sharing"), N_("Allow all users"), N_("Custom"));
-    my $restrict = exists $conf{RESTRICT} ? text2bool($conf{RESTRICT}) : 1;
-
-    my $r = $in->ask_from_list_('fileshare',
-N("Would you like to allow users to share some of their directories?
-Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.
-
-\"Custom\" permit a per-user granularity.
-"),
-				\@l, $l[$restrict ? (getgrnam('fileshare') ? 2 : 0) : 1]) or return;
-    $restrict = $r ne $l[1];
-    my $custom = $r eq $l[2];
-    if ($r ne $l[0]) {
-	require services;
-	my %types = (
-	    nfs => [ 'nfs-utils', 'nfs',
-		     N("NFS: the traditional Unix file sharing system, with less support on Mac and Windows.")
-		   ],
-	    smb => [ 'samba-server', 'smb',
-		     N("SMB: a file sharing system used by Windows, Mac OS X and many modern Linux systems.")
-		   ],
-       );
-	my %l;
-	if ($type) {
-	    %l = ($type => 1);
-	} else {
-	    %l = map_each { $::a => services::starts_on_boot($::b->[1]) } %types;
-	    $in->ask_from_({ messages => N("You can export using NFS or SMB. Please select which you would like to use."),
-			     callbacks => { ok_disabled => sub { !any { $_ } values %l } },
-			   },
-			   [ map { { text => $types{$_}[2], val => \$l{$_}, type => 'bool' } } keys %l ]) or return;
-	}
-	foreach (keys %types) {
-	    my ($pkg, $service, $_descr) = @{$types{$_}};
-	    my $file = "/etc/init.d/$service";
-	    if ($l{$_}) {
-		$in->do_pkgs->ensure_is_installed($pkg, $file) or return;
-		services::start($service);
-		services::start_service_on_boot($service);
-	    } elsif (-e $file) {
-		services::stop($service);
-		services::do_not_start_service_on_boot($service);
-	    }
-	}
-    }
-    $conf{RESTRICT} = bool2yesno($restrict);
-    setVarsInSh($file, \%conf);
-
-    if ($custom) {
-	run_program::rooted($::prefix, 'groupadd', '-r', 'fileshare');
-	if ($in->ask_from_no_check(
-	{
-	 -e '/usr/sbin/userdrake' ? (ok => N("Launch userdrake"), cancel => N("Close")) : (cancel => ''),
-	 messages =>
-N("The per-user sharing uses the group \"fileshare\". 
-You can use userdrake to add a user to this group.")
-	}, [])) {
-	    run_program::run('userdrake');
-	}
-    }
-}
-
-sub monitor_full_edid() {
-    return if $::noauto;
-
-    devices::make('zero');
-    my ($vbe, $edid);
-    run_program::raw({ timeout => 20 }, 'monitor-edid', '>', \$edid, '2>', \$vbe, '-v', '--perl');
-    if ($::isInstall) {
-	foreach (['edid', \$edid], ['vbe', \$vbe]) {
-	    my ($name, $val) = @$_;
-	    if (-e "/tmp/$name") {
-		my $old = cat_("/tmp/$name");
-		if (length($$val) < length($old)) {
-		    log::l("new $name is worse, keeping the previous one");
-		    $$val = $old;
-		} elsif (length($$val) > length($old)) {
-		    log::l("new $name is better, dropping the previous one");
-		}
-	    }
-	    output("/tmp/$name", $$val);
-	}
-    }
-    ($edid, $vbe);
-}
-
-sub running_window_manager() {
-    my @window_managers = qw(kwin gnome-session icewm wmaker afterstep fvwm fvwm2 fvwm95 mwm twm enlightenment xfce blackbox sawfish olvwm fluxbox);
-
-    foreach (@window_managers) {
-	my @pids = fuzzy_pidofs(qr/\b$_\b/) or next;
-	return wantarray() ? ($_, @pids) : $_;
-    }
-    undef;
-}
-
-sub ask_window_manager_to_logout {
-    my ($wm) = @_;
-    
-    my %h = (
-	'kwin' => "dcop kdesktop default logout",
-	'gnome-session' => "gnome-session-save --kill",
-	'icewm' => "killall -QUIT icewm",
-    );
-    my $cmd = $h{$wm} or return;
-    if ($wm eq 'gnome-session') {
-	#- NB: consolehelper does not destroy $HOME whereas kdesu does
-	#- for gnome, we use consolehelper, so below works
-	$ENV{ICEAUTHORITY} ||= "$ENV{HOME}/.ICEauthority";
-    } elsif ($wm eq 'kwin' && $> == 0) {
-	#- we can not use dcop when we are root
-	$cmd = "su $ENV{USER} -c '$cmd'";
-    }
-    system($cmd);
-    1;
-}
-
-sub ask_window_manager_to_logout_then_do {
-    my ($wm, $pid, $action) = @_;
-    if (fork()) {
-	any::ask_window_manager_to_logout($wm);
-	return;
-    }
-    
-    open STDIN, "</dev/zero";
-    open STDOUT, ">/dev/null";
-    open STDERR, ">&STDERR";
-    c::setsid();
-    exec 'perl', '-e', q(
-	my ($wm, $pid, $action) = @ARGV;
-	my $nb;
-	for ($nb = 30; $nb && -e "/proc/$pid"; $nb--) { sleep 1 }
-	system($action) if $nb;
-    ), $wm, $pid, $action;
-}
-
-sub alloc_raw_device {
-    my ($prefix, $device) = @_;
-    my $used = 0;
-    my $raw_dev;
-    substInFile {
-	$used = max($used, $1) if m|^\s*/dev/raw/raw(\d+)|;
-	if (eof) {
-	    $raw_dev = "raw/raw" . ($used + 1);
-	    $_ .= "/dev/$raw_dev /dev/$device\n";
-	}
-    } "$prefix/etc/sysconfig/rawdevices";
-    $raw_dev;
-}
-
-sub config_dvd {
-    my ($prefix, $have_devfsd) = @_;
-
-    #- can not have both a devfs and a non-devfs config
-    #- the /etc/sysconfig/rawdevices solution gives errors with devfs
-
-    my @dvds = grep { detect_devices::isDvdDrive($_) } detect_devices::cdroms() or return;
-
-    log::l("configuring DVD: " . join(" ", map { $_->{device} } @dvds));
-    #- create /dev/dvd symlink
-    each_index {
-	devfssymlinkf($_, 'dvd' . ($::i ? $::i + 1 : ''));
-	devfs_rawdevice($_, 'rdvd' . ($::i ? $::i + 1 : '')) if $have_devfsd;
-    } @dvds;
-
-    if (!$have_devfsd) {
-	my $raw_dev = alloc_raw_device($prefix, 'dvd');
-	symlink($raw_dev, "$prefix/dev/rdvd");
-    }
-}
-
-sub config_mtools {
-    my ($prefix) = @_;
-    my $file = "$prefix/etc/mtools.conf";
-    -e $file or return;
-
-    my ($f1, $f2) = detect_devices::floppies_dev();
-    substInFile {
-	s|drive a: file="(.*?)"|drive a: file="/dev/$f1"|;
-	s|drive b: file="(.*?)"|drive b: file="/dev/$f2"| if $f2;
-    } $file;
-}
-
-1;
diff --git a/perl-install/authentication.pm b/perl-install/authentication.pm
deleted file mode 100644
index 11716b539..000000000
--- a/perl-install/authentication.pm
+++ /dev/null
@@ -1,680 +0,0 @@
-package authentication; # $Id$
-
-use common;
-use any;
-
-sub kinds { 
-    my $no_para = @_ == 0;
-    my ($do_pkgs, $meta_class) = @_;
-    my $allow_SmartCard = $no_para || $do_pkgs->is_available('castella-pam');
-    my $allow_AD = $no_para || $meta_class =~ /corporate/;
-    (
-	'local', 
-	'LDAP',
-	'NIS', 
-	if_($allow_SmartCard, 'SmartCard'), 
-	'winbind', 
-	if_($allow_AD, 'AD', 'SMBKRB'),
-    );
-}
-
-sub kind2name {
-    my ($kind) = @_;
-    # Keep the following strings in sync with kind2description ones!!!
-    ${{ local => N("Local file"), 
-    LDAP => N("LDAP"), 
-    NIS => N("NIS"),
-    SmartCard => N("Smart Card"),
-    winbind => N("Windows Domain"), 
-    AD => N("Active Directory with SFU"),
-    SMBKRB => N("Active Directory with Winbind") }}{$kind};
-}
-
-my %kind2pam_kind = (
-    local     => [],
-    SmartCard => ['castella'],
-    LDAP      => ['ldap'], 
-    NIS       => [],
-    AD        => ['krb5'],
-    winbind   => ['winbind'], 
-    SMBKRB    => ['winbind'],
-);
-
-my %kind2nsswitch = (
-    local     => [],
-    SmartCard => [],
-    LDAP      => ['ldap'], 
-    NIS       => ['nis'],
-    AD        => ['ldap'],
-    winbind   => ['winbind'], 
-    SMBKRB    => ['winbind'],
-);
-
-sub kind2description {
-    my (@kinds) = @_;
-    my %kind2description = (
-	local     => [ N("Local file:"), N("Use local for all authentication and information user tell in local file"), ],
-	LDAP      => [ N("LDAP:"), N("Tells your computer to use LDAP for some or all authentication. LDAP consolidates certain types of information within your organization."), ],
-	NIS       => [ N("NIS:"), N("Allows you to run a group of computers in the same Network Information Service domain with a common password and group file."), ],
-	winbind   => [ N("Windows Domain:"), N("Winbind allows the system to retrieve information and authenticate users in a Windows domain."), ],
-	AD        => [ N("Active Directory with SFU:"), N("Kerberos is a secure system for providing network authentication services."), ],
-	SMBKRB    => [ N("Active Directory with Winbind:"), N("Kerberos is a secure system for providing network authentication services.")  ],
-    );
-    join('', map { $_ ? qq($_->[0]\n$_->[1]\n\n) : '' } map { $kind2description{$_} } @kinds);
-}
-sub to_kind {
-    my ($authentication) = @_;
-    (find { exists $authentication->{$_} } kinds()) || 'local';
-}
-
-sub domain_to_ldap_domain {
-    my ($domain) = @_;
-    join(',', map { "dc=$_" } split /\./, $domain);
-}
-
-sub ask_parameters {
-    my ($in, $netc, $authentication, $kind) = @_;
-
-    #- keep only this authentication kind
-    foreach (kinds()) {
-	delete $authentication->{$_} if $_ ne $kind;
-    }
-
-    if ($kind eq 'LDAP') {
-	$netc->{LDAPDOMAIN} ||= domain_to_ldap_domain($netc->{DOMAINNAME});
-	$in->ask_from('',
-		     N("Authentication LDAP"),
-		     [ { label => N("LDAP Base dn"), val => \$netc->{LDAPDOMAIN} },
-		       { label => N("LDAP Server"), val => \$authentication->{LDAP_server} },
-		     ]) or return;
-    } elsif ($kind eq 'AD') {
-	
-	$authentication->{AD_domain} ||= $netc->{DOMAINNAME};
-	$authentication->{AD_users_db} ||= 'cn=users,' . domain_to_ldap_domain($authentication->{AD_domain});
-
-	$in->do_pkgs->install(qw(perl-Net-DNS));
-
-	my @srvs = query_srv_names($authentication->{AD_domain});
-	$authentication->{AD_server} ||= $srvs[0] if @srvs;
-
-	my %sub_kinds = my @sub_kinds = (
-	    simple => N("simple"), 
-	    tls => N("TLS"),
-	    ssl => N("SSL"),
-	    kerberos => N("security layout (SASL/Kerberos)"),
-	);
-
-	my $AD_user = $authentication->{AD_user} =~ /(.*)\@\Q$authentication->{AD_domain}\E$/ ? $1 : $authentication->{AD_user};
-	my $anonymous = $AD_user;
-
-	$in->ask_from('',
-		     N("Authentication Active Directory"),
-		     [ { label => N("Domain"), val => \$authentication->{AD_domain} },
-		     #{ label => N("Server"), val => \$authentication->{AD_server} },
-		       { label => N("Server"), type => 'combo', val => \$authentication->{AD_server}, list => \@srvs , not_edit => 0 },
-		       { label => N("LDAP users database"), val => \$authentication->{AD_users_db} },
-		       { label => N("Use Anonymous BIND "), val => \$anonymous, type => 'bool' },
-		       { label => N("LDAP user allowed to browse the Active Directory"), val => \$AD_user, disabled => sub { $anonymous } },
-		       { label => N("Password for user"), val => \$authentication->{AD_password}, disabled => sub { $anonymous } },
-		       { label => N("Encryption"), val => \$authentication->{sub_kind}, list => [ map { $_->[0] } group_by2(@sub_kinds) ], format => sub { $sub_kinds{$_[0]} } },
-		     ]) or return;
-	$authentication->{AD_user} = !$AD_user || $authentication->{sub_kind} eq 'anonymous' ? '' : 
-	                             $AD_user =~ /@/ ? $AD_user : "$AD_user\@$authentication->{AD_domain}";
-	$authentication->{AD_password} = '' if !$authentication->{AD_user};
-
-
-    } elsif ($kind eq 'NIS') { 
-	$authentication->{NIS_server} ||= 'broadcast';
-	$netc->{NISDOMAIN} ||= $netc->{DOMAINNAME};
-	$in->ask_from('',
-		     N("Authentication NIS"),
-		     [ { label => N("NIS Domain"), val => \$netc->{NISDOMAIN} },
-		       { label => N("NIS Server"), val => \$authentication->{NIS_server}, list => ["broadcast"], not_edit => 0 },
-		     ]) or return;
-    } elsif ($kind eq 'winbind' || $kind eq 'SMBKRB') {
-	#- maybe we should browse the network like diskdrake --smb and get the 'doze server names in a list 
-	#- but networking is not setup yet necessarily
-	$in->ask_warn('', N("For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.
-You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.
-If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.
-Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.
-The command 'wbinfo -t' will test whether your authentication secrets are good."))
-	  if $kind eq 'winbind';
-
-	$authentication->{AD_domain} ||= $netc->{DOMAINNAME} if $kind eq 'SMBKRB';
-	 $authentication->{AD_users_idmap} ||= 'ou=idmap,' . domain_to_ldap_domain($authentication->{AD_domain}) if $kind eq 'SMBKRB';
-	$netc->{WINDOMAIN} ||= $netc->{DOMAINNAME};
-	my $anonymous;
-	$in->ask_from('',
-		      $kind eq 'SMBKRB' ? N("Authentication Active Directory") : N("Authentication Windows Domain"),
-		        [ if_($kind eq 'SMBKRB', 
-			  { label => N("Domain"), val => \$authentication->{AD_domain} }
-			     ),
-			  { label => N("Windows Domain"), val => \$netc->{WINDOMAIN} },
-			  { label => N("Domain Admin User Name"), val => \$authentication->{winuser} },
-			  { label => N("Domain Admin Password"), val => \$authentication->{winpass}, hidden => 1 },
-			  { label => N("Use Idmap for store UID/SID "), val => \$anonymous, type => 'bool' },
-			  { label => N("Default Idmap "), val => \$authentication->{AD_users_idmap}, disabled => sub { $anonymous } },
-			]) or return;
-    }
-    $authentication->{$kind} ||= 1;
-    1;
-}
-
-sub ask_root_password_and_authentication {
-    my ($in, $netc, $superuser, $authentication, $meta_class, $security) = @_;
-
-    my $kind = to_kind($authentication);
-    my @kinds = authentication::kinds($in->do_pkgs, $meta_class);
-
-    $in->ask_from_({
-	 title => N("Set administrator (root) password and network authentication methods"), 
-	 messages => N("Set administrator (root) password"),
-	 advanced_label => N("Authentication method"),
-	 advanced_messages => kind2description(@kinds),
-	 interactive_help_id => "setRootPassword",
-	 cancel => ($security <= 2 ? 
-		    #-PO: keep this short or else the buttons will not fit in the window
-		    N("No password") : ''),
-	 focus_first => 1,
-	 callbacks => { 
-	     complete => sub {
-		 $superuser->{password} eq $superuser->{password2} or $in->ask_warn('', [ N("The passwords do not match"), N("Please try again") ]), return 1,0;
-		 length $superuser->{password} < 2 * $security
-		   and $in->ask_warn('', N("This password is too short (it must be at least %d characters long)", 2 * $security)), return 1,0;
-		 return 0;
-        } } }, [
-{ label => N("Password"), val => \$superuser->{password},  hidden => 1 },
-{ label => N("Password (again)"), val => \$superuser->{password2}, hidden => 1 },
-{ label => N("Authentication"), val => \$kind, type => 'list', list => \@kinds, format => \&authentication::kind2name, advanced => 1 },
-        ]) or delete $superuser->{password};
-
-    ask_parameters($in, $netc, $authentication, $kind) or goto &ask_root_password_and_authentication;
-}
-
-
-sub get() {
-    my $system_auth = cat_("/etc/pam.d/system-auth");
-    { md5 => $system_auth =~ /md5/, shadow => $system_auth =~ /shadow/ };
-}
-
-sub set {
-    my ($in, $netc, $authentication, $o_when_network_is_up) = @_;
-
-    my $when_network_is_up = $o_when_network_is_up || sub { my ($f) = @_; $f->() };
-
-    enable_shadow() if $authentication->{shadow};    
-
-    my $kind = authentication::to_kind($authentication);
-
-    log::l("authentication::set $kind");
-
-    my $pam_modules = $kind2pam_kind{$kind} or log::l("kind2pam_kind does not know $kind");
-    $pam_modules ||= [];
-    sshd_config_UsePAM(@$pam_modules > 0);
-    set_pam_authentication(@$pam_modules);
-
-    my $nsswitch = $kind2nsswitch{$kind} or log::l("kind2nsswitch does not know $kind");
-    $nsswitch ||= [];
-    set_nsswitch_priority(@$nsswitch);
-
-    if ($kind eq 'local') {
-    } elsif ($kind eq 'SmartCard') {
-	$in->do_pkgs->install('castella-pam');
-    } elsif ($kind eq 'LDAP') {
-	$in->do_pkgs->install(qw(openldap-clients nss_ldap pam_ldap autofs));
-
-	my $domain = $netc->{LDAPDOMAIN} || do {
-	    my $s = run_program::rooted_get_stdout($::prefix, 'ldapsearch', '-x', '-h', $authentication->{LDAP_server}, '-b', '', '-s', 'base', '+');
-	    first($s =~ /namingContexts: (.+)/);
-	} or log::l("no ldap domain found on server $authentication->{LDAP_server}"), return;
-
-	update_ldap_conf(
-			 host => $authentication->{LDAP_server},
-			 base => $domain,
-			 nss_base_shadow => $domain . "?sub",
-			 nss_base_passwd => $domain . "?sub",
-			 nss_base_group => $domain . "?sub",
-			);
-    } elsif ($kind eq 'AD') {
-	$in->do_pkgs->install(qw(nss_ldap pam_krb5 libsasl2-plug-gssapi));
-	my $port = "389";
-	
-	my $ssl = { 
-		   anonymous => 'off', 
-		   simple => 'off', 
-		   tls => 'start_tls',
-		   ssl => 'on',
-		   kerberos => 'off',
-		  }->{$authentication->{sub_kind}};
-
-	if ($ssl eq 'on') {
-		$port = '636';
-	}
-	
-	
-	
-	update_ldap_conf(
-			 host => $authentication->{AD_server},
-			 base => domain_to_ldap_domain($authentication->{AD_domain}),
-			 nss_base_shadow => "$authentication->{AD_users_db}?sub",
-			 nss_base_passwd => "$authentication->{AD_users_db}?sub",
-			 nss_base_group => "$authentication->{AD_users_db}?sub",
-
-			 ssl => $ssl,
-			 sasl_mech => $authentication->{sub_kind} eq 'kerberos' ? 'GSSAPI' : '',
-			 port => $port,
-
-			 binddn => $authentication->{AD_user},
-			 bindpw => $authentication->{AD_password},
-
-			 (map_each { "nss_map_objectclass_$::a" => $::b }
-			  posixAccount => 'User',
-			  shadowAccount => 'User',
-			  posixGroup => 'Group',
-			 ),
-
-
-			 scope => 'sub',
-			 pam_login_attribute => 'sAMAccountName',
-			 pam_filter => 'objectclass=User',
-			 pam_password => 'ad',
-
-			 
-			 (map_each { "nss_map_attribute_$::a" => $::b }
-			  uid => 'sAMAccountName',
-			  uidNumber => 'msSFU30UidNumber',
-			  gidNumber => 'msSFU30GidNumber',
-			  cn => 'sAMAccountName',
-			  uniqueMember => 'member',
-			  userPassword => 'msSFU30Password',
-			  homeDirectory => 'msSFU30HomeDirectory',
-			  loginShell => 'msSFU30LoginShell',
-			  gecos => 'name',
-			 ),
-			);
-
-	configure_krb5_for_AD($authentication);
-
-    } elsif ($kind eq 'NIS') {
-	$in->do_pkgs->install(qw(ypbind autofs));
-	my $domain = $netc->{NISDOMAIN};
-	$domain || $authentication->{NIS_server} ne "broadcast" or die N("Can not use broadcast with no NIS domain");
-	my $t = $domain ? "domain $domain" . ($authentication->{NIS_server} ne "broadcast" && " server") : "ypserver";
-	substInFile {
-	    $_ = "#~$_" unless /^#/;
-	    $_ .= "$t $authentication->{NIS_server}\n" if eof;
-	} "$::prefix/etc/yp.conf";
-
-	#- no need to modify system-auth for nis
-
-	$when_network_is_up->(sub {
-	    run_program::rooted($::prefix, 'nisdomainname', $domain);
-	    run_program::rooted($::prefix, 'service', 'ypbind', 'restart');
-	}) if !$::isInstall; #- TODO: also do it during install since nis can be useful to resolve domain names. Not done because 9.2-RC
-#    } elsif ($kind eq 'winbind' || $kind eq 'AD' && $authentication->{subkind} eq 'winbind') {
-
-#	}) if !$::isInstall; 
-#- TODO: also do it during install since nis can be useful to resolve domain names. Not done because 9.2-RC
-    } elsif ($kind eq 'winbind') {
-
-	my $domain = uc $netc->{WINDOMAIN};
-	
-	$in->do_pkgs->install('samba-winbind');
-
-	require network::smb;
-	network::smb::write_smb_conf($domain);
-	run_program::rooted($::prefix, "chkconfig", "--level", "35", "winbind", "on");
-	mkdir_p("$::prefix/home/$domain");
-	run_program::rooted($::prefix, 'service', 'smb', 'restart');
-	run_program::rooted($::prefix, 'service', 'winbind', 'restart');
-	
-	#- defer running smbpassword until the network is up
-
-	$when_network_is_up->(sub {
-	    run_program::rooted($::prefix, 'net', 'join', $domain, '-U', $authentication->{winuser} . '%' . $authentication->{winpass});
-	});
-    } elsif ($kind eq 'SMBKRB') {
-	 $authentication->{AD_server} ||= 'ads.' . $authentication->{AD_domain};
-	my $domain = uc $netc->{WINDOMAIN};
-	my $realm = $authentication->{AD_domain};
-
-	configure_krb5_for_AD($authentication);
-	$in->do_pkgs->install('samba-winbind', 'pam_krb5', 'samba-server', 'samba-client');
-		
-	require network::smb;
-	network::smb::write_smb_ads_conf($domain,$realm);
-	run_program::rooted($::prefix, "chkconfig", "--level", "35", "winbind", "on");
-	mkdir_p("$::prefix/home/$domain");
-	run_program::rooted($::prefix, 'net', 'time', 'set', '-S', $authentication->{AD_server});
-	run_program::rooted($::prefix, 'service', 'smb', 'restart');
-	run_program::rooted($::prefix, 'service', 'winbind', 'restart');
-	
-	$when_network_is_up->(sub {
-	    run_program::rooted($::prefix, 'net', 'ads', 'join', '-U', $authentication->{winuser} . '%' . $authentication->{winpass});
-	});
-    }
-}
-
-
-sub pam_modules() {
-    'pam_ldap', 'pam_castella', 'pam_winbind', 'pam_krb5', 'pam_mkhomedir';
-}
-sub pam_module_from_path { 
-    $_[0] && $_[0] =~ m|(/lib/security/)?(pam_.*)\.so| && $2;
-}
-sub pam_module_to_path { 
-    "$_[0].so";
-}
-sub pam_format_line {
-    my ($type, $control, $module, @para) = @_;
-    sprintf("%-11s %-13s %s\n", $type, $control, join(' ', pam_module_to_path($module), @para));
-}
-
-sub get_raw_pam_authentication() {
-    my %before_deny;
-    foreach (cat_("$::prefix/etc/pam.d/system-auth")) {
-	my ($type, $control, $module, @para) = split;
-	if ($module = pam_module_from_path($module)) {
-	    $before_deny{$type}{$module} = \@para if $control eq 'sufficient' && member($module, pam_modules());
-	}
-    }
-    \%before_deny;
-}
-
-sub set_pam_authentication {
-    my (@authentication_kinds) = @_;
-    
-    my %special = (
-	auth => \@authentication_kinds,
-	account => [ difference2(\@authentication_kinds, [ 'castella' ]) ],
-	password => [ intersection(\@authentication_kinds, [ 'ldap', 'krb5' ]) ],
-    );
-    my %before_first = (
-	session => 
-	  intersection(\@authentication_kinds, [ 'winbind', 'krb5', 'ldap' ]) 
-	    ? pam_format_line('session', 'optional', 'pam_mkhomedir', 'skel=/etc/skel/', 'umask=0022') :
-	  member('castella', @authentication_kinds)
-	    ? pam_format_line('session', 'optional', 'pam_castella') : '',
-    );
-    my %after_deny = (
-	session => member('krb5', @authentication_kinds) ? pam_format_line('session', 'optional', 'pam_krb5') : '',
-    );
-
-    substInFile {
-	my ($type, $control, $module, @para) = split;
-	if ($module = pam_module_from_path($module)) {
-	    if (member($module, pam_modules())) {
-		#- first removing previous config
-		$_ = '';
-	    }
-	    if ($module eq 'pam_unix' && $special{$type}) {
-		my @para_for_last = 
-		    $type eq 'auth' ? qw(likeauth nullok use_first_pass) :
-		    $type eq 'account' ? qw(use_first_pass) : @{[]};
-		@para = difference2(\@para, \@para_for_last);
-
-		my ($before_noask, $ask) = partition { $_ eq 'castella' } @{$special{$type}};
-		my ($before, $after) = partition { $_ eq 'krb5' } @$ask;
-
-		if (!@$ask) {
-		    @para_for_last = grep { $_ ne 'use_first_pass' } @para_for_last;
-		}
-
-		my @l = ((map { [ "pam_$_" ] } @$before_noask, @$before),
-			 [ 'pam_unix', @para ],
-			 (map { [ "pam_$_" ] } @$after),
-			 );
-		push @{$l[-1]}, @para_for_last;
-		$_ = join('', map { pam_format_line($type, 'sufficient', @$_) } @l);
-
-		if ($control eq 'required') {
-		    #- ensure a pam_deny line is there
-		    ($control, $module, @para) = ('required', 'pam_deny');
-		    $_ .= pam_format_line($type, $control, $module);
-		}
-	    }
-	    if (my $s = delete $before_first{$type}) {
-		$_ = $s . $_;
-	    }
-	    if ($control eq 'required' && member($module, 'pam_deny', 'pam_unix')) {
-		if (my $s = delete $after_deny{$type}) {
-		    $_ .= $s;
-		}
-	    }
-	}
-    } "$::prefix/etc/pam.d/system-auth";
-}
-
-sub get_pam_authentication_kinds() {
-    my $before_deny = get_raw_pam_authentication();
-    map { s/pam_//; $_ } keys %{$before_deny->{auth}};
-}
-
-sub set_nsswitch_priority {
-    my (@kinds) = @_;
-    my @known = qw(nis ldap winbind);
-    substInFile {
-	if (my ($database, $l) = /^(\s*(?:passwd|shadow|group|automount):\s*)(.*)/) {
-	    my @l = difference2([ split(' ', $l) ], \@known);
-	    $_ = $database . join(' ', uniq('files', @kinds, @l)) . "\n";
-	}	
-    } "$::prefix/etc/nsswitch.conf";
-}
-
-my $special_ldap_cmds = join('|', 'nss_map_attribute', 'nss_map_objectclass');
-sub _after_read_ldap_line {
-    my ($s) = @_;
-    $s =~ s/\b($special_ldap_cmds)\s*/$1 . '_'/e;
-    $s;
-}
-sub _pre_write_ldap_line {
-    my ($s) = @_;
-    $s =~ s/\b($special_ldap_cmds)_/$1 . ' '/e;
-    $s;
-}
-
-sub read_ldap_conf() {
-    my %conf = map { 
-	s/^\s*#.*//; 
-	if_(_after_read_ldap_line($_) =~ /(\S+)\s+(.*)/, $1 => $2);
-    } cat_("$::prefix/etc/ldap.conf");
-    \%conf;
-}
-
-sub update_ldap_conf {    
-    my (%conf) = @_;
-
-    substInFile {
-	my ($cmd) = _after_read_ldap_line($_) =~ /^\s*#?\s*(\w+)\s/;
-	if ($cmd && exists $conf{$cmd}) {
-	    my $val = $conf{$cmd};
-	    $conf{$cmd} = '';
-	    $_ = $val ? _pre_write_ldap_line("$cmd $val\n") : /^\s*#/ ? $_ : "#$_";
-        }
-	if (eof) {
-	    foreach my $cmd (keys %conf) {
-		my $val = $conf{$cmd} or next;
-		$_ .= _pre_write_ldap_line("$cmd $val\n");
-	    }
-	}
-    } "$::prefix/etc/ldap.conf";
-}
-
-sub configure_krb5_for_AD {
-    my ($authentication) = @_;
-
-    my $uc_domain = uc $authentication->{AD_domain};
-    my $krb5_conf_file = "$::prefix/etc/krb5.conf";
-
-    krb5_conf_update($krb5_conf_file,
-		     libdefaults => (
-				     default_realm => $uc_domain,
-				     dns_lookup_realm => $authentication->{AD_server} ? 'false' : 'true',
-				     dns_lookup_kdc => $authentication->{AD_server} ? 'false' : 'true',
-				    ));
-
-    my @sections = (
-		    realms => <<EOF,
- $uc_domain = {
-  kdc = $authentication->{AD_server}:88
-  admin_server = $authentication->{AD_server}:749
-  default_domain = $authentication->{AD_domain}
- }
-EOF
-		    domain_realm => <<EOF,
- .$authentication->{AD_domain} = $uc_domain
-EOF
-		    kdc => <<'EOF',
- profile = /etc/kerberos/krb5kdc/kdc.conf
-EOF
-		    pam => <<'EOF',
- debug = false
- ticket_lifetime = 36000
- renew_lifetime = 36000
- forwardable = true
- krb4_convert = false
-EOF
-		    login => <<'EOF',
- krb4_convert = false
- krb4_get_tickets = false
-EOF
-		       );
-    foreach (group_by2(@sections)) {
-	my ($section, $txt) = @$_;
-	krb5_conf_overwrite_category($krb5_conf_file, $section => $authentication->{AD_server} ? $txt : '');
-    }
-}
-
-sub krb5_conf_overwrite_category {
-    my ($file, $category, $new_val) = @_;
-
-    my $done;
-    substInFile {
-	if (my $i = /^\s*\[\Q$category\E\]/i ... /^\[/) {
-	    if ($new_val) {
-		if ($i == 1) {
-		    $_ .= $new_val;
-		    $done = 1;
-		} elsif ($i =~ /E/) {
-		    $_ = "\n$_";
-		} else {
-		    $_ = '';
-		}
-	    } else {
-		$_ = '' if $i !~ /E/;
-	    }
-	}
-	#- if category has not been found above.
-	if (eof && $new_val && !$done) {
-	    $_ .= "\n[$category]\n$new_val";
-	}
-    } $file;
-}
-
-sub krb5_conf_update {
-    my ($file, $category, %subst_) = @_;
-
-    my %subst = map { lc($_) => [ $_, $subst_{$_} ] } keys %subst_;
-
-    my $s;
-    foreach (MDK::Common::File::cat_($file), "[NOCATEGORY]\n") {
-	if (my $i = /^\s*\[\Q$category\E\]/i ... /^\[/) {
-	    if ($i =~ /E/) { #- for last line of category
-		chomp $s; $s .= "\n";
-		$s .= " $_->[0] = $_->[1]\n" foreach values %subst;
-		%subst = ();
-	    } elsif (/^\s*([^=]*?)\s*=/) {
-		if (my $e = delete $subst{lc($1)}) {
-		    $_ = " $1 = $e->[1]\n";
-		}
-	      }
-	}
-	$s .= $_ if !/^\Q[NOCATEGORY]/;
-    }
-
-    #- if category has not been found above.
-    if (keys %subst) {
-	chomp $s;
-	$s .= "\n[$category]\n";
-	$s .= " $_->[0] = $_->[1]\n" foreach values %subst;
-    }
-
-    MDK::Common::File::output($file, $s);
-
-}
-
-sub sshd_config_UsePAM {
-    my ($UsePAM) = @_;
-    my $sshd = "$::prefix/etc/ssh/sshd_config";
-    -e $sshd or return;
-
-    my $val = "UsePAM " . bool2yesno($UsePAM);
-    substInFile {
-	$val = '' if s/^#?UsePAM.*/$val/;
-	$_ .= "$val\n" if eof && $val;
-    } $sshd;
-}
-
-sub query_srv_names {
-    my ($domain) = @_;
-
-    eval { require Net::DNS; 1 } or return;
-    my $res = Net::DNS::Resolver->new;
-    my $query = $res->query("_ldap._tcp.$domain", 'srv') or return;
-    map { $_->target } $query->answer;
-}
-
-sub enable_shadow() {
-    run_program::rooted($::prefix, "pwconv")  or log::l("pwconv failed");
-    run_program::rooted($::prefix, "grpconv") or log::l("grpconv failed");
-}
-
-sub user_crypted_passwd {
-    my ($u, $isMD5) = @_;
-    if ($u->{password}) {
-	crypt($u->{password}, $isMD5 ? '$1$' . salt(8) : salt(2));
-    } else {
-	$u->{pw} || '';
-    }
-}
-
-sub set_root_passwd {
-    my ($superuser, $authentication) = @_;
-    $superuser->{name} = 'root';
-    write_passwd_user($superuser, $authentication->{md5});    
-    delete $superuser->{name};
-}
-
-sub write_passwd_user {
-    my ($u, $isMD5) = @_;
-
-    $u->{pw} = user_crypted_passwd($u, $isMD5);      
-    $u->{shell} ||= '/bin/bash';
-
-    substInFile {
-	my $l = unpack_passwd($_);
-	if ($l->{name} eq $u->{name}) {
-	    add2hash_($u, $l);
-	    $_ = pack_passwd($u);
-	    $u = {};
-	}
-	if (eof && $u->{name}) {
-	    $_ .= pack_passwd($u);
-	}
-    } "$::prefix/etc/passwd";
-}
-
-my @etc_pass_fields = qw(name pw uid gid realname home shell);
-sub unpack_passwd {
-    my ($l) = @_;
-    my %l; @l{@etc_pass_fields} = split ':', chomp_($l);
-    \%l;
-}
-sub pack_passwd {
-    my ($l) = @_;
-    join(':', @$l{@etc_pass_fields}) . "\n";
-}
-
-1;
-
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
deleted file mode 100644
index dea939d0e..000000000
--- a/perl-install/bootloader.pm
+++ /dev/null
@@ -1,1442 +0,0 @@
-package bootloader; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%vga_modes);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table;
-use fs::type;
-use fs::get;
-use log;
-use any;
-use devices;
-use loopback;
-use detect_devices;
-use partition_table::raw;
-use run_program;
-use modules;
-
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-my $vmlinuz_regexp = 'vmlinuz|win4lin';
-my $decompose_vmlinuz_name = qr/((?:$vmlinuz_regexp).*?)-(\d+\.\d+.*)/;
-
-sub expand_vmlinuz_symlink {
-    my ($vmlinuz) = @_;
-    my $f = $::prefix . ($vmlinuz =~ m!^/! ? $vmlinuz : "/boot/$vmlinuz");
-    -l $f ? readlink($f) : $vmlinuz;
-}
-
-sub installed_vmlinuz_raw() { grep { /^($vmlinuz_regexp)/ } all("$::prefix/boot") }
-sub installed_vmlinuz() { grep { ! -l "$::prefix/boot/$_" } installed_vmlinuz_raw() }
-sub vmlinuz2version {
-    my ($vmlinuz) = @_;
-    expand_vmlinuz_symlink($vmlinuz) =~ /$decompose_vmlinuz_name/ && $2;
-}
-sub vmlinuz2basename {
-    my ($vmlinuz) = @_;
-    expand_vmlinuz_symlink($vmlinuz) =~ /$decompose_vmlinuz_name/ && $1;
-}
-sub basename2initrd_basename {
-    my ($basename) = @_;
-    $basename =~ s!vmlinuz-?!!; #- here we do not use $vmlinuz_regexp since we explictly want to keep all that is not "vmlinuz"
-    'initrd' . ($basename ? "-$basename" : '');    
-}
-sub kernel_str2vmlinuz_long {
-    my ($kernel) = @_;
-    $kernel->{basename} . '-' . $kernel->{version};
-}
-sub kernel_str2initrd_long {
-    my ($kernel) = @_;
-    basename2initrd_basename($kernel->{basename}) . '-' . $kernel->{version} . '.img';
-}
-sub kernel_str2vmlinuz_short {
-    my ($kernel) = @_;
-    if ($kernel->{use_long_name}) {
-	kernel_str2vmlinuz_long($kernel);
-    } else {
-	my $ext = $kernel->{ext} ? "-$kernel->{ext}" : '';
-	$kernel->{basename} . $ext;
-    }
-}
-sub kernel_str2initrd_short {
-    my ($kernel) = @_;
-    if ($kernel->{use_long_name}) {
-	kernel_str2initrd_long($kernel);
-    } else {
-	my $ext = $kernel->{ext} ? "-$kernel->{ext}" : '';
-	basename2initrd_basename($kernel->{basename}) . $ext . '.img';
-    }
-}
-
-sub vmlinuz2kernel_str {
-    my ($vmlinuz) = @_;
-    my ($basename, $version) = expand_vmlinuz_symlink($vmlinuz) =~ /$decompose_vmlinuz_name/ or return;
-    { 
-	basename => $basename,
-	version => $version, 
-	$version =~ /(.*mdk)-?(.*)/ ? (ext => $2, version_no_ext => $1) : (version_no_ext => $version),
-    };
-}
-sub kernel_str2label {
-    my ($kernel, $o_use_long_name) = @_;
-    my $base = $kernel->{basename} eq 'vmlinuz' ? 'linux' : $kernel->{basename};
-    $o_use_long_name || $kernel->{use_long_name} ?
-      sanitize_ver("$base-$kernel->{version}") : 
-        $kernel->{ext} ? "$base-$kernel->{ext}" : $base;
-}
-
-sub get {
-    my ($vmlinuz, $bootloader) = @_;
-    $_->{kernel_or_dev} && $_->{kernel_or_dev} eq $vmlinuz and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-sub get_label {
-    my ($label, $bootloader) = @_;
-    $_->{label} && lc(make_label_lilo_compatible($_->{label})) eq lc(make_label_lilo_compatible($label)) and return $_ foreach @{$bootloader->{entries}};
-    undef;
-}
-
-sub mkinitrd {
-    my ($kernel_version, $entry) = @_;
-
-    my $initrd = $entry->{initrd};
-    $::testing || -e "$::prefix/$initrd" and return 1;
-
-    my $loop_boot = loopback::prepare_boot();
-
-    modules::load('loop');
-    my @options = (
-		   "-v", "-f", $initrd, "--ifneeded", $kernel_version, 
-		   if_($entry->{initrd_options}, split(' ', $entry->{initrd_options})),
-		  );
-    if (!run_program::rooted($::prefix, 'mkinitrd', @options)) {
-	unlink("$::prefix/$initrd");
-	die "mkinitrd failed:\n(mkinitrd @options))";
-    }
-    add_boot_splash($entry->{initrd}, $entry->{vga});
-
-    loopback::save_boot($loop_boot);
-
-    -e "$::prefix/$initrd";
-}
-
-sub remove_boot_splash {
-    my ($initrd) = @_;
-    run_program::rooted($::prefix, '/usr/share/bootsplash/scripts/remove-boot-splash', $initrd);
-}
-sub add_boot_splash {
-    my ($initrd, $vga) = @_;
-
-    $vga or return;
-
-    require Xconfig::resolution_and_depth;
-    if (my $res = Xconfig::resolution_and_depth::from_bios($vga)) {
-	run_program::rooted($::prefix, '/usr/share/bootsplash/scripts/make-boot-splash', $initrd, $res->{X});
-    } else {
-	log::l("unknown vga bios mode $vga");
-    }
-}
-
-sub read {
-    my ($all_hds) = @_;
-    my $fstab = [ fs::get::fstab($all_hds) ];
-    foreach my $main_method (main_method_choices()) {
-	my $f = $bootloader::{"read_$main_method"} or die "unknown bootloader method $main_method (read)";
-	my $bootloader = $f->($fstab);
-
-	my @devs = $bootloader->{boot};
-	if ($bootloader->{'raid-extra-boot'} =~ /mbr/ && 
-	    (my $md = fs::get::device2part($bootloader->{boot}, $all_hds->{raids}))) {
-	    @devs = map { $_->{rootDevice} } @{$md->{disks}};
-	} elsif ($bootloader->{'raid-extra-boot'} =~ m!/dev/!) {
-	    @devs = split(',', $bootloader->{'raid-extra-boot'});
-	}
-
-	my ($type) = map {
-	    if (m!/fd\d+$!) {
-		warn "not checking the method on floppy, assuming $main_method is right\n";
-		$main_method;
-	    } elsif ($main_method eq 'yaboot') {
-		#- not checking on ppc, there's only yaboot anyway :)
-		$main_method;
-	    } elsif ($main_method eq 'cromwell') {
-		#- XBox
-		$main_method;
-	    } elsif (my $type = partition_table::raw::typeOfMBR($_)) {
-		warn "typeOfMBR $type on $_ for method $main_method\n" if $ENV{DEBUG};
-		$type;
-	    } else { () }
-	} @devs;
-
-	if ($type eq $main_method) {
-	    my @prefered_entries = map { get_label($_, $bootloader) } $bootloader->{default}, 'linux';
-
-	    if (my $default = find { $_ && $_->{type} eq 'image' } (@prefered_entries, @{$bootloader->{entries}})) {
-		$bootloader->{default_vga} = $default->{vga};
-		$bootloader->{perImageAppend} ||= $default->{append};
-		log::l("perImageAppend is now $bootloader->{perImageAppend}");
-	    }
-	    return $bootloader;
-	}
-    }
-}
-
-sub read_grub {
-    my ($fstab) = @_;
-    my $global = 1;
-    my ($e, %b);
-
-    my $grub2dev = read_grub_device_map();
-
-    my $menu_lst_file = "$::prefix/boot/grub/menu.lst";
-    -e $menu_lst_file or return;
-
-    foreach (cat_($menu_lst_file)) {
-        chomp;
-	s/^\s*//; s/\s*$//;
-        next if /^#/ || /^$/;
-	my ($keyword, $v) = split(' ', $_, 2) or
-	  warn qq(unknown line in /boot/grub/menu.lst: "$_"\n), next;
-
-        if ($keyword eq 'title') {
-            push @{$b{entries}}, $e = { label => $v };
-            $global = 0;
-        } elsif ($global) {
-            $b{$keyword} = $v eq '' ? 1 : grub2file($v, $grub2dev, $fstab);
-        } else {
-            if ($keyword eq 'kernel') {
-                $e->{type} = 'image';
-                (my $kernel, $e->{append}) = split(' ', $v, 2);
-		$e->{root} = $1 if $e->{append} =~ s/root=(\S*)\s*//;
-		$e->{kernel_or_dev} = grub2file($kernel, $grub2dev, $fstab);
-            } elsif ($keyword eq 'root') {
-                $e->{type} = 'other';
-		if ($v !~ /,/) {
-		    $e->{unsafe} = 1;
-		}
-                $e->{kernel_or_dev} = grub2dev($v, $grub2dev);
-                $e->{append} = "";
-            } elsif ($keyword eq 'initrd') {
-                $e->{initrd} = grub2file($v, $grub2dev, $fstab);
-            } elsif ($keyword eq 'map') {
-		$e->{mapdrive}{$2} = $1 if $v =~ m/\((.*)\) \((.*)\)/;
-	    }
-        }
-    }
-    foreach (cat_("$::prefix/boot/grub/install.sh")) {
-        $b{boot} = grub2dev($1, $grub2dev) if /\s+d\s+(\(.*?\))/;
-    }
-
-    #- sanitize
-    foreach (@{$b{entries}}) {
-	my ($vga, $other) = partition { /^vga=/ } split(' ', $_->{append});
-	if (@$vga) {
-	    $_->{vga} = $vga->[0] =~ /vga=(.*)/ && $1;
-	    $_->{append} = join(' ', @$other);
-	}
-    }
-
-    $b{nowarn} = 1;
-    # handle broken installkernel -r:
-    if (@{$b{entries}}) {
-	$b{default} = min($b{default}, scalar(@{$b{entries}}) - 1);
-	$b{default} = $b{entries}[$b{default}]{label};
-    }
-    $b{method} = 'grub';
-
-    \%b;
-}
-
-sub yaboot2dev {
-    my ($of_path) = @_;
-    find { dev2yaboot($_) eq $of_path } map { "/dev/$_->{dev}" } devices::read_proc_partitions_raw();
-}
-
-# assumes file is in /boot
-# to do: use yaboot2dev for files as well
-#- example of of_path: /pci@f4000000/ata-6@d/disk@0:3,/initrd-2.6.8.1-8mdk.img
-sub yaboot2file {
-    my ($of_path) = @_;
-    
-    if ($of_path =~ /,/) {
-	"$::prefix/boot/" . basename($of_path);
-    } else {
-	yaboot2dev($of_path);
-    }
-}
-
-sub read_cromwell() {
-    my %b;
-    $b{method} = 'cromwell';
-    \%b;
-}
-sub read_yaboot() { &read_lilo }
-sub read_lilo() {
-    my $file = sprintf("$::prefix/etc/%s.conf", arch() =~ /ppc/ ? 'yaboot' : 'lilo');
-    my $global = 1;
-    my ($e, $v);
-    my %b;
-    -e $file or return;
-    foreach (cat_($file)) {
-	next if /^\s*#/ || /^\s*$/;
-	($_, $v) = /^\s*([^=\s]+)\s*(?:=\s*(.*?))?\s*$/ or log::l("unknown line in $file: $_"), next;
-
-	if (/^(?:image|other|macos|macosx|bsd|darwin)$/) {
-	    $v = yaboot2file($v) if arch() =~ /ppc/;
-	    push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
-	    $global = 0;
-	} elsif ($global) {
-	    if ($_ eq 'disk' && $v =~ /(\S+)\s+bios\s*=\s*(\S+)/) {
-		$b{bios}{$1} = $2;
-	    } elsif ($_ eq 'bios') {
-		$b{bios}{$b{disk}} = $v;
-	    } elsif ($_ eq 'init-message') {
-		$v =~ s/\\n//g; 
-		$v =~ s/"//g;
-		$b{'init-message'} = $v;
-	    } else {
-		$b{$_} = $v eq '' ? 1 : $v;
-	    }
-	} else {
-	    if ((/map-drive/ .. /to/) && /to/) {
-		$e->{mapdrive}{$e->{'map-drive'}} = $v;
-	    } else {
-		if (arch() =~ /ppc/ && $_ eq 'initrd') {
-		    $v = yaboot2file($v);
-		}
-		$e->{$_} = $v || 1 if !member($_, 'read-only');
-	    }
-	}
-    }
-
-    sub remove_quotes_and_spaces {
-	local ($_) = @_;
-	s/^\s*//; s/\s*$//;
-	s/^"(.*?)"$/$1/;
-	s/^\s*//; s/\s*$//; #- do it again for append=" foo"
-	$_;
-    }
-
-    $_->{append} = remove_quotes_and_spaces($_->{append}) foreach \%b, @{$b{entries}};
-    $_->{label}  = remove_quotes_and_spaces($_->{label})  foreach @{$b{entries}};
-    $b{default} = remove_quotes_and_spaces($b{default}) if $b{default};
-    if (arch() =~ /ppc/) {
-	$b{method} = 'yaboot';
-    } else {
-	delete $b{timeout} unless $b{prompt};
-	$b{timeout} = $b{timeout} / 10 if $b{timeout};
-	$b{method} = 'lilo-' . (member($b{install}, 'text', 'menu', 'graphic') ? $b{install} : 'graphic');
-	delete $b{message};
-    }
-
-    #- cleanup duplicate labels & bad entries (in case file is corrupted)
-    my %seen;
-    @{$b{entries}} = 
-	grep { !$seen{$_->{label}}++ }
-	grep { $_->{type} ne 'image' || -e "$::prefix$_->{kernel_or_dev}" } @{$b{entries}};
-
-    \%b;
-}
-
-sub suggest_onmbr {
-    my ($hd) = @_;
-    
-    my ($onmbr, $unsafe) = (1, 1);
-
-    if (my $type = partition_table::raw::typeOfMBR($hd->{device})) {
-	if (member($type, qw(dos dummy empty))) {
-	    $unsafe = 0;
-	} elsif (!member($type, qw(lilo grub))) {
-	    $onmbr = 0;
-	}
-	log::l("bootloader::suggest_onmbr: type $type, onmbr $onmbr, unsafe $unsafe");
-    }
-    ($onmbr, $unsafe);
-}
-
-sub allowed_boot_parts {
-    my ($bootloader, $all_hds) = @_;
-    (
-     @{$all_hds->{hds}},
-     if_($bootloader->{method} =~ /lilo/,
-	 grep { $_->{level} eq '1' } @{$all_hds->{raids}}
-	),
-     (grep { !isFat_or_NTFS($_) } fs::get::hds_fstab(@{$all_hds->{hds}})),
-     detect_devices::floppies(),
-    );
-}
-
-sub same_entries {
-    my ($a, $b) = @_;
-
-    foreach (uniq(keys %$a, keys %$b)) {
-	if (member($_, 'label', 'append', 'mapdrive')) {
-	    next;
-	} else {
-	    next if $a->{$_} eq $b->{$_};
-
-	    my ($inode_a, $inode_b) = map { (stat "$::prefix$_")[1] } ($a->{$_}, $b->{$_});
-	    next if $inode_a && $inode_b && $inode_a == $inode_b;
-	}
-
-	log::l("entries $a->{label} do not have same $_: $a->{$_} ne $b->{$_}");
-	return;
-    }
-    1;
-}
-
-sub add_entry {
-    my ($bootloader, $v) = @_;
-
-    my $to_add = $v;
-    my $label = $v->{label};
-    for (my $i = 0; $i < 10;) {
-	my $conflicting = get_label($label, $bootloader);
-
-	$to_add->{label} = $label;
-
-	if ($conflicting) {
-	    #- replacing $conflicting with $to_add
-	    @{$bootloader->{entries}} = map { $_ == $conflicting ? $to_add : $_ } @{$bootloader->{entries}};
-	} else {
-	    #- we have found an unused label
-	    push @{$bootloader->{entries}}, $to_add;
-	}
-
-	if (!$conflicting || same_entries($conflicting, $to_add)) {
-	    log::l("current labels: " . join(" ", map { $_->{label} } @{$bootloader->{entries}}));
-	    return $v;
-	}
-	$to_add = $conflicting;
-
-	if ($to_add->{label} eq 'linux') {
-	    expand_entry_symlinks($bootloader, $to_add);
-	    $label = kernel_str2label(vmlinuz2kernel_str($to_add->{kernel_or_dev}), 'use_long_name');
-	} else {
-	    $label =~ s/^alt\d*_//;
-	    $label = 'alt' . ($i++ ? $i : '') . "_$label";
-	}
-    }
-    die 'add_entry';
-}
-
-sub expand_entry_symlinks {
-    my ($bootloader, $entry) = @_;
-
-    foreach my $kind ('kernel_or_dev', 'initrd') {
-	my $old_long_name = $bootloader->{old_long_names} && $bootloader->{old_long_names}{$entry->{$kind}} or next;
-
-	#- replace all the {$kind} using this symlink to the real file
-	log::l("replacing $entry->{$kind} with $old_long_name for bootloader label $entry->{label}");
-	$entry->{$kind} = $old_long_name;
-    }
-}
-
-sub _do_the_symlink {
-    my ($bootloader, $link, $long_name) = @_;
-
-    my $existing_link = readlink("$::prefix$link");
-    if ($existing_link && $existing_link eq $long_name) {
-	#- nothing to do :)
-	return;
-    }
-
-    #- the symlink is going to change! 
-    #- replace all the {$kind} using this symlink to the real file
-    my $old_long_name = $existing_link =~ m!^/! ? $existing_link : "/boot/$existing_link";
-    if (-e "$::prefix$old_long_name") {
-	$bootloader->{old_long_names}{$link} = $old_long_name;
-    } else {
-	log::l("ERROR: $link points to $old_long_name which does not exist");
-    }
-
-    #- changing the symlink
-    symlinkf($long_name, "$::prefix$link")
-      or cp_af("$::prefix/boot/$long_name", "$::prefix$link");
-}
-
-sub add_kernel {
-    my ($bootloader, $kernel_str, $v, $b_nolink, $b_no_initrd) = @_;
-
-    add2hash($v,
-	     {
-	      type => 'image',
-	      label => kernel_str2label($kernel_str),
-	     });
-
-    #- normalize append and handle special options
-    {
-	my ($simple, $dict) = unpack_append("$bootloader->{perImageAppend} $v->{append}");
-	if (-e "$::prefix/sbin/udev" && $kernel_str->{version} =~ /(2\.\d+\.\d+)/ && c::rpmvercmp($1, '2.6.8') >= 0) {
-	    log::l("it is a recent kernel, so we remove any existing devfs= kernel option to enable udev");
-	    @$dict = grep { $_->[0] ne 'devfs' } @$dict;
-	}
-	$v->{append} = pack_append($simple, $dict);
-    }
-
-    #- new versions of yaboot do not handle symlinks
-    $b_nolink ||= arch() =~ /ppc/;
-
-    $b_nolink ||= $kernel_str->{use_long_name};
-
-    my $vmlinuz_long = kernel_str2vmlinuz_long($kernel_str);
-    $v->{kernel_or_dev} = "/boot/$vmlinuz_long";
-    -e "$::prefix$v->{kernel_or_dev}" or log::l("unable to find kernel image $::prefix$v->{kernel_or_dev}"), return;
-    if (!$b_nolink) {
-	$v->{kernel_or_dev} = '/boot/' . kernel_str2vmlinuz_short($kernel_str);
-	_do_the_symlink($bootloader, $v->{kernel_or_dev}, $vmlinuz_long);
-    }
-    log::l("adding $v->{kernel_or_dev}");
-
-    if (!$b_no_initrd) {
-	my $initrd_long = kernel_str2initrd_long($kernel_str);
-	$v->{initrd} = "/boot/$initrd_long";
-	mkinitrd($kernel_str->{version}, $v) or undef $v->{initrd};
-	if ($v->{initrd} && !$b_nolink) {
-	    $v->{initrd} = '/boot/' . kernel_str2initrd_short($kernel_str);
-	    _do_the_symlink($bootloader, $v->{initrd}, $initrd_long);
-	}
-    }
-
-    add_entry($bootloader, $v);
-}
-
-sub duplicate_kernel_entry {
-    my ($bootloader, $new_label) = @_;
-
-    get_label($new_label, $bootloader) and return;
-
-    my $entry = { %{ get_label('linux', $bootloader) }, label => $new_label };
-    add_entry($bootloader, $entry);
-}
-
-my $uniq_dict_appends = join('|', qw(devfs acpi pci resume PROFILE XFree));
-
-sub unpack_append {
-    my ($s) = @_;
-    my @l = split(' ', $s);
-    [ grep { !/=/ } @l ], [ map { if_(/(.*?)=(.*)/, [$1, $2]) } @l ];
-}
-sub pack_append {
-    my ($simple, $dict) = @_;
-
-    #- normalize
-    $simple = [ reverse(uniq(reverse @$simple)) ];
-    $dict = [ reverse(uniq_ { 
-	my ($k, $v) = @$_; 
-	$k =~ /^($uniq_dict_appends)$/ ? $k : "$k=$v";
-    } reverse @$dict) ];
-
-    join(' ', @$simple, map { "$_->[0]=$_->[1]" } @$dict);
-}
-
-sub normalize_append {
-    my ($s) = @_;
-    my ($simple, $dict) = unpack_append($s);
-    pack_append($simple, $dict);
-}
-
-sub modify_append {
-    my ($b, $f) = @_;
-
-    my @l = grep { $_->{type} eq 'image' && !($::isStandalone && $_->{label} eq 'failsafe') } @{$b->{entries}};
-
-    foreach (\$b->{perImageAppend}, map { \$_->{append} } @l) {
-	my ($simple, $dict) = unpack_append($$_);
-	$f->($simple, $dict);
-	$$_ = pack_append($simple, $dict);
-	log::l("modify_append: $$_");
-    }
-}
-
-sub append__mem_is_memsize { $_[0] =~ /^\d+[kM]?$/i }
-
-sub get_append_simple {
-    my ($b, $key) = @_;
-    my ($simple, $_dict) = unpack_append($b->{perImageAppend});
-    member($key, @$simple);
-}
-sub get_append_with_key {
-    my ($b, $key) = @_;
-    my ($_simple, $dict) = unpack_append($b->{perImageAppend});
-    my @l = map { $_->[1] } grep { $_->[0] eq $key } @$dict;
-
-    log::l("more than one $key in $b->{perImageAppend}") if @l > 1;
-    $l[0];
-}
-sub remove_append_simple {
-    my ($b, $key) = @_;
-    modify_append($b, sub {
-	my ($simple, $_dict) = @_;
-	@$simple = grep { $_ ne $key } @$simple;
-    });
-}
-sub set_append_with_key {
-    my ($b, $key, $val) = @_;
-
-    modify_append($b, sub {
-	my ($_simple, $dict) = @_;
-
-	if ($val eq '') {
-	    @$dict = grep { $_->[0] ne $key } @$dict;
-	} else {
-	    push @$dict, [ $key, $val ];
-	}
-    });
-}
-sub set_append_simple {
-    my ($b, $key) = @_;
-
-    modify_append($b, sub {
-	my ($simple, $_dict) = @_;
-	@$simple = uniq(@$simple, $key);
-    });
-}
-sub may_append_with_key {
-    my ($b, $key, $val) = @_;
-    set_append_with_key($b, $key, $val) if !get_append_with_key($b, $key);
-}
-
-sub get_append_memsize {
-    my ($b) = @_;
-    my ($_simple, $dict) = unpack_append($b->{perImageAppend});
-    my $e = find { $_->[0] eq 'mem' && append__mem_is_memsize($_->[1]) } @$dict;
-    $e && $e->[1];
-}
-
-sub set_append_memsize {
-    my ($b, $memsize) = @_;
-
-    modify_append($b, sub {
-	my ($_simple, $dict) = @_;
-
-	@$dict = grep { $_->[0] ne 'mem' || !append__mem_is_memsize($_->[1]) } @$dict;
-	push @$dict, [ mem => $memsize ] if $memsize;
-    });
-}
-
-sub get_append_netprofile {
-    my ($e) = @_;
-    my ($simple, $dict) = unpack_append($e->{append});
-    my ($p, $dict_) = partition { $_->[0] eq 'PROFILE' } @$dict;
-    pack_append($simple, $dict_), $p->[0][1];
-}
-sub set_append_netprofile {
-    my ($e, $append, $profile) = @_;
-    my ($simple, $dict) = unpack_append($append);
-    push @$dict, [ 'PROFILE', $profile ] if $profile;
-    $e->{append} = pack_append($simple, $dict);
-}
-
-sub configure_entry {
-    my ($entry) = @_;
-    $entry->{type} eq 'image' or return;
-
-    if (my $kernel_str = vmlinuz2kernel_str($entry->{kernel_or_dev})) {
-	$entry->{initrd} ||= '/boot/' . kernel_str2initrd_short($kernel_str);
-	mkinitrd($kernel_str->{version}, $entry) or undef $entry->{initrd};
-    }
-}
-
-sub get_kernels_and_labels_before_kernel_remove {
-    my ($to_remove_kernel) = @_;
-    my @kernels = grep { $_ ne $to_remove_kernel } installed_vmlinuz();
-    map { kernel_str2label($_) => $_ } get_kernel_labels(\@kernels);
-}
-
-sub get_kernels_and_labels {
-    my ($b_prefer_24) = @_;
-    get_kernel_labels([ installed_vmlinuz() ], $b_prefer_24);
-}
-
-sub get_kernel_labels {
-    my ($kernels, $b_prefer_24) = @_;
-    
-    my @kernels_str = 
-      sort { c::rpmvercmp($b->{version_no_ext}, $a->{version_no_ext}) } 
-      grep { -d "$::prefix/lib/modules/$_->{version}" }
-      map { vmlinuz2kernel_str($_) } @$kernels;
-
-    if ($b_prefer_24) {
-	my ($kernel_24, $other) = partition { $_->{ext} eq '' && $_->{version} =~ /^\Q2.4/ } @kernels_str;
-	@kernels_str = (@$kernel_24, @$other);
-    }
-
-    $kernels_str[0]{ext} = '';
-
-    my %labels;
-    foreach (@kernels_str) {
-	if ($labels{$_->{ext}}) {
-	    $_->{use_long_name} = 1;
-	} else {
-	    $labels{$_->{ext}} = 1;
-	}
-    }
-    @kernels_str;
-}
-
-# sanitize_ver: long function when it could be shorter but we are sure
-#		to catch everything and can be readable if we want to
-#		add new scheme name.
-# DUPLICATED from /usr/share/loader/common.pm
-sub sanitize_ver {
-    my ($string) = @_;
-
-    my ($name, $main_version, undef, $extraversion, $rest) = 
-      $string =~ m!^(.*?-)(\d+(?:\.\d+)*)(-((?:pre|rc)\d+))?(.*)$!;
-
-    if (my ($mdkver, $cpu, $nproc, $mem) = $rest =~ m|-(.+)-(.+)-(.+)-(.+)|) {
-	$rest = "$cpu$nproc$mem-$mdkver";
-    }
-    $name = '' if $name eq 'linux-';
-
-    my $return = "$name$main_version$extraversion$rest";
-
-    $return =~ s|\.||g;
-    $return =~ s|mdk||;
-    $return =~ s|64GB|64G|;
-    $return =~ s|4GB|4G|;
-    $return =~ s|secure|sec|;
-    $return =~ s|enterprise|ent|;
-
-    $return;
-}
-
-sub suggest {
-    my ($bootloader, $all_hds, %options) = @_;
-    my $fstab = [ fs::get::fstab($all_hds) ];
-    my $root_part = fs::get::root($fstab);
-    my $root = '/dev/' . (isLoopback($root_part) ? 'loop7' : $root_part->{device});
-    my $boot = fs::get::root($fstab, 'boot')->{device};
-    #- PPC xfs module requires enlarged initrd
-    my $xfsroot = $root_part->{fs_type} eq 'xfs';
-
-    my ($onmbr, $unsafe) = $bootloader->{crushMbr} ? (1, 0) : suggest_onmbr($all_hds->{hds}[0]);
-    add2hash_($bootloader, arch() =~ /ppc/ ?
-	{
-	 defaultos => "linux",
-	 entries => [],
-	 'init-message' => "Welcome to Mandriva Linux!",
-	 delay => 30,	#- OpenFirmware delay
-	 timeout => 50,
-	 enableofboot => 1,
-	 enablecdboot => 1,
-	   if_(detect_devices::get_mac_model() =~ /IBM/,
-	 boot => "/dev/sda1",
-           ),
-	 xfsroot => $xfsroot,
-	} :
-	{
-	 bootUnsafe => $unsafe,
-	 entries => [],
-	 timeout => $onmbr && 10,
-	 nowarn => 1,
-	   if_(arch() !~ /ia64/,
-	 boot => "/dev/" . ($onmbr ? $all_hds->{hds}[0]{device} : $boot),
-	 map => "/boot/map",
-	 color => 'black/cyan yellow/cyan',
-         ),
-	});
-
-    if (!$bootloader->{message} || $bootloader->{message} eq "1") {
-	my $msg_en =
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-N_("Welcome to the operating system chooser!
-
-Choose an operating system from the list above or
-wait for default boot.
-
-");
-	my $msg = translate($msg_en);
-	#- use the english version if more than 20% of 8bits chars
-	$msg = $msg_en if int(grep { $_ & 0x80 } unpack "c*", $msg) / length($msg) > 0.2;
-	$bootloader->{message} = $msg;
-    }
-
-    add2hash_($bootloader, { memsize => $1 }) if cat_("/proc/cmdline") =~ /\bmem=(\d+[KkMm]?)(?:\s.*)?$/;
-    if (my ($s, $port, $speed) = cat_("/proc/cmdline") =~ /console=(ttyS(\d),(\d+)\S*)/) {
-	log::l("serial console $s $port $speed");
-	set_append_with_key($bootloader, console => $s);
-	any::set_login_serial_console($port, $speed);
-    }
-
-    my @kernels = get_kernels_and_labels() or die "no kernel installed";
-
-    foreach my $kernel (@kernels) {
-	my $e = add_kernel($bootloader, $kernel,
-	       {
-		root => $root,
-		if_($options{vga_fb} && $kernel->{ext} eq '', vga => $options{vga_fb}), #- using framebuffer
-		if_($options{vga_fb} && $options{quiet}, append => "splash=silent"),
-	       });
-
-	if ($options{vga_fb} && $e->{label} eq 'linux') {
-	    add_kernel($bootloader, $kernel, { root => $root, label => 'linux-nonfb' });
-	}
-    }
-
-    #- remove existing libsafe, do not care if the previous one was modified by the user?
-    @{$bootloader->{entries}} = grep { $_->{label} ne 'failsafe' } @{$bootloader->{entries}};
-
-    add_kernel($bootloader, $kernels[0],
-	       { root => $root, label => 'failsafe', append => 'devfs=nomount failsafe' });
-
-    if (arch() =~ /ppc/) {
-	#- if we identified a MacOS partition earlier - add it
-	if (defined $partition_table::mac::macos_part) {
-	    add_entry($bootloader,
-		      {
-		       type => "macos",
-		       kernel_or_dev => $partition_table::mac::macos_part
-		      });
-	}
-    } elsif (arch() !~ /ia64/) {
-	#- search for dos (or windows) boot partition. Do not look in extended partitions!
-	my @windows_boot_parts =
-	  grep { isFat_or_NTFS($_) && member(fs::type::fs_type_from_magic($_), 'vfat', 'ntfs') }
-	    map { @{$_->{primary}{normal}} } @{$all_hds->{hds}};
-	each_index {
-	    add_entry($bootloader,
-		      {
-		       type => 'other',
-		       kernel_or_dev => "/dev/$_->{device}",
-		       label => 'windows' . ($::i || ''),
-		       table => "/dev/$_->{rootDevice}"
-		      });
-	} @windows_boot_parts;
-    }
-
-    my @preferred = map { "linux-$_" } 'p3-smp-64GB', 'secure', 'enterprise', 'smp', 'i686-up-4GB';
-    if (my $preferred = find { get_label($_, $bootloader) } @preferred) {
-	$bootloader->{default} ||= $preferred;
-    }
-    $bootloader->{default} ||= "linux";
-    $bootloader->{method} ||= first(method_choices($fstab));
-}
-
-sub detect_main_method {
-    my ($all_hds) = @_;
-    my $bootloader = &read($all_hds);
-    $bootloader && main_method($bootloader->{method});
-}
-
-sub main_method {
-    my ($method) = @_;
-    $method =~ /(\w+)/ && $1;
-}
-
-sub config_files() {
-    my %files = (
-	lilo => '/etc/lilo.conf',
-	grub => '/boot/grub/menu.lst',
-	grub_install => '/boot/grub/install.sh',
-    );
-    
-    map_each { 
-	my $content = cat_("$::prefix/$::b");
-	{ main_method => main_method($::a), name => $::a, file => $::b, content => $content };
-    } %files;
-}
-
-sub method2text {
-    my ($method) = @_;
-    +{
-	'lilo-graphic' => N("LILO with graphical menu"),
-	'lilo-menu'    => N("LILO with text menu"),
-	'grub'         => N("Grub"),
-	'yaboot'       => N("Yaboot"),
-    }->{$method};
-}
-
-sub method_choices_raw {
-    my ($b_prefix_mounted) = @_;
-    is_xbox() ? 'cromwell' :
-    arch() =~ /ppc/ ? 'yaboot' : 
-    arch() =~ /ia64/ ? 'lilo' : 
-      (
-       if_(!$b_prefix_mounted || whereis_binary('lilo', $::prefix), 
-	   'lilo-graphic', 'lilo-menu'),
-       if_(!$b_prefix_mounted || whereis_binary('grub', $::prefix), 
-	   'grub'),
-      );
-}
-sub method_choices {
-    my ($fstab) = @_;
-    my $root_part = fs::get::root($fstab);
-
-    grep {
-	!(/lilo/ && isLoopback($root_part))
-	  && !(/lilo-graphic/ && detect_devices::matching_desc__regexp('ProSavageDDR'))
-	  && !(/grub/ && isRAID($root_part));
-    } method_choices_raw(1);
-}
-sub main_method_choices {
-    my ($b_prefix_mounted) = @_;
-    uniq(map { main_method($_) } method_choices_raw($b_prefix_mounted));
-}
-sub configured_main_methods() {
-    my @bad_main_methods = map { if_(!$_->{content}, $_->{main_method}) } config_files();
-    difference2([ main_method_choices(1) ], \@bad_main_methods);
-}
-
-sub keytable {
-    my ($f) = @_;
-    $f or return;
-
-    if ($f !~ /\.klt$/) {
-	my $file = "/boot/$f.klt";
-	run_program::rooted($::prefix, "keytab-lilo.pl", ">", $file, $f) or return;
-	$f = $file;
-    }
-    -r "$::prefix/$f" && $f;
-}
-
-
-sub create_link_source() {
-    #- we simply do it for all kernels :)
-    #- so this can be used in %post of kernel and also of kernel-source
-    foreach (all("$::prefix/usr/src")) {
-	my ($version) = /^linux-(\d+\.\d+.*)/ or next;
-	foreach (glob("$::prefix/lib/modules/$version*")) {
-	    -d $_ or next;
-	    log::l("creating symlink $_/build");
-	    symlink "/usr/src/linux-$version", "$_/build";
-	}
-    }
-}
-
-sub dev2yaboot {
-    my ($dev) = @_;
-
-    devices::make("$::prefix$dev"); #- create it in the chroot
-
-    my $of_dev;
-    run_program::rooted_or_die($::prefix, "/usr/sbin/ofpath", ">", \$of_dev, $dev);
-    chomp($of_dev);
-    log::l("OF Device: $of_dev");
-    $of_dev;
-}
-
-sub check_enough_space() {
-    my $e = "$::prefix/boot/.enough_space";
-    output $e, 1; -s $e or die N("not enough room in /boot");
-    unlink $e;
-}
-
-sub write_yaboot {
-    my ($bootloader, $all_hds) = @_;
-
-    my $fstab = [ fs::get::fstab($all_hds) ]; 
-
-    my $file2yaboot = sub {
-	my ($part, $file) = fs::get::file2part($fstab, $_[0]);
-	dev2yaboot('/dev/' . $part->{device}) . "," . $file;
-    };
-
-    #- do not write yaboot.conf for old-world macs
-    my $mac_type = detect_devices::get_mac_model();
-    return if $mac_type =~ /Power Macintosh/;
-
-    $bootloader->{prompt} ||= $bootloader->{timeout};
-
-    if ($bootloader->{message}) {
-	eval { output("$::prefix/boot/message", $bootloader->{message}) }
-	  or $bootloader->{message} = 0;
-    }
-
-    my @conf;
-
-    if (!get_label($bootloader->{default}, $bootloader)) {
-	log::l("default bootloader entry $bootloader->{default} is invalid, choose another one");
-	$bootloader->{default} = $bootloader->{entries}[0]{label};
-    }
-    push @conf, "# yaboot.conf - generated by DrakX/drakboot";
-    push @conf, "# WARNING: do not forget to run ybin after modifying this file\n";
-    push @conf, "default=" . make_label_lilo_compatible($bootloader->{default}) if $bootloader->{default};
-    push @conf, sprintf('init-message="\n%s\n"', $bootloader->{'init-message'}) if $bootloader->{'init-message'};
-
-    if ($bootloader->{boot}) {
-	push @conf, "boot=$bootloader->{boot}";
-	push @conf, "ofboot=" . dev2yaboot($bootloader->{boot}) if $mac_type !~ /IBM/;
-    } else {
-	die "no bootstrap partition defined.";
-    }
-
-    push @conf, map { "$_=$bootloader->{$_}" } grep { $bootloader->{$_} } (qw(delay timeout), if_($mac_type !~ /IBM/, 'defaultos'));
-    push @conf, "install=/usr/lib/yaboot/yaboot";
-    if ($mac_type =~ /IBM/) {
-	push @conf, 'nonvram';
-    } else {
-	push @conf, 'magicboot=/usr/lib/yaboot/ofboot';
-	push @conf, grep { $bootloader->{$_} } qw(enablecdboot enableofboot);
-    }
-    foreach my $entry (@{$bootloader->{entries}}) {
-
-	if ($entry->{type} eq "image") {
-	    push @conf, "$entry->{type}=" . $file2yaboot->($entry->{kernel_or_dev});
-	    my @entry_conf;
-	    push @entry_conf, "label=" . make_label_lilo_compatible($entry->{label});
-	    push @entry_conf, "root=$entry->{root}";
-	    push @entry_conf, "initrd=" . $file2yaboot->($entry->{initrd}) if $entry->{initrd};
-	    #- xfs module on PPC requires larger initrd - say 6MB?
-	    push @entry_conf, "initrd-size=6144" if $bootloader->{xfsroot};
-	    push @entry_conf, qq(append=" $entry->{append}") if $entry->{append};
-	    push @entry_conf, $entry->{'read-write'} ? "read-write" : "read-only";
-	    push @conf, map { "\t$_" } @entry_conf;
-	} else {
-	    my $of_dev = dev2yaboot($entry->{kernel_or_dev});
-	    push @conf, "$entry->{type}=$of_dev";
-	}
-    }
-    my $f = "$::prefix/etc/yaboot.conf";
-    log::l("writing yaboot config to $f");
-    renamef($f, "$f.old");
-    output($f, map { "$_\n" } @conf);
-}
-
-sub install_yaboot {
-    my ($bootloader, $all_hds) = @_;
-    log::l("Installing boot loader...");
-    write_yaboot($bootloader, $all_hds);
-    when_config_changed_yaboot($bootloader);
-}
-sub when_config_changed_yaboot {
-    my ($bootloader) = @_;
-    $::testing and return;
-    if (defined $install_steps_interactive::new_bootstrap) {
-	run_program::run("hformat", $bootloader->{boot}) or die "hformat failed";
-    }	
-    my $error;
-    run_program::rooted($::prefix, "/usr/sbin/ybin", "2>", \$error) or die "ybin failed: $error";
-}
-
-sub install_cromwell { 
-    my ($_bootloader, $_all_hds) = @_;
-    log::l("XBox/Cromwell - nothing to install...");
-}
-sub write_cromwell { 
-    my ($_bootloader, $_all_hds) = @_;
-    log::l("XBox/Cromwell - nothing to write...");
-}
-sub when_config_changed_cromwell {
-    my ($_bootloader) = @_;
-    log::l("XBox/Cromwell - nothing to do...");
-}
-
-sub make_label_lilo_compatible {
-    my ($label) = @_; 
-    $label = substr($label, 0, 31); #- lilo does not handle more than 31 char long labels
-    $label =~ s/ /_/g; #- lilo does not support blank character in image names, labels or aliases
-    qq("$label");
-}
-
-sub write_lilo {
-    my ($bootloader, $all_hds) = @_;
-    $bootloader->{prompt} ||= $bootloader->{timeout};
-
-    my $file2fullname = sub {
-	my ($file) = @_;
-	if (arch() =~ /ia64/) {
-	    my $fstab = [ fs::get::fstab($all_hds) ];
-	    (my $part, $file) = fs::get::file2part($fstab, $file);
-	    my %hds = map_index { $_ => "hd$::i" } map { $_->{device} } 
-	      sort { 
-		  my ($a_is_fat, $b_is_fat) = ($a->{fs_type} eq 'vfat', $b->{fs_type} eq 'vfat');
-		  $a_is_fat <=> $b_is_fat || $a->{device} cmp $b->{device};
-	      } @$fstab;
-	    $hds{$part->{device}} . ":" . $file;
-	} else {
-	    $file;
-	}
-    };
-
-    my @sorted_hds = sort_hds_according_to_bios($bootloader, $all_hds);
-
-    if (is_empty_hash_ref($bootloader->{bios} ||= {}) && $all_hds->{hds}[0] != $sorted_hds[0]) {
-	log::l("Since we're booting on $sorted_hds[0]{device}, make it bios=0x80");
-	$bootloader->{bios} = { "/dev/$sorted_hds[0]{device}" => '0x80' };
-    }
-
-    my @conf;
-
-    #- normalize: RESTRICTED is only valid if PASSWORD is set
-    delete $bootloader->{restricted} if !$bootloader->{password};
-    foreach my $entry (@{$bootloader->{entries}}) {
-	delete $entry->{restricted} if !$entry->{password} && !$bootloader->{password};
-    }
-
-    if (!get_label($bootloader->{default}, $bootloader)) {
-	log::l("default bootloader entry $bootloader->{default} is invalid, choose another one");
-	$bootloader->{default} = $bootloader->{entries}[0]{label};
-    }
-    push @conf, "# File generated by DrakX/drakboot";
-    push @conf, "# WARNING: do not forget to run lilo after modifying this file\n";
-    push @conf, "default=" . make_label_lilo_compatible($bootloader->{default}) if $bootloader->{default};
-    push @conf, map { "$_=$bootloader->{$_}" } grep { $bootloader->{$_} } qw(boot root map install vga keytable raid-extra-boot);
-    push @conf, grep { $bootloader->{$_} } qw(linear geometric compact prompt nowarn restricted static-bios-codes);
-    push @conf, qq(append="$bootloader->{append}") if $bootloader->{append};
-    push @conf, "password=" . $bootloader->{password} if $bootloader->{password}; #- also done by msec
-    push @conf, "timeout=" . round(10 * $bootloader->{timeout}) if $bootloader->{timeout};
-    push @conf, "serial=" . $1 if get_append_with_key($bootloader, 'console') =~ /ttyS(.*)/;
-    
-    push @conf, "message=/boot/message" if arch() !~ /ia64/;
-    push @conf, "menu-scheme=wb:bw:wb:bw" if arch() !~ /ia64/;
-
-    push @conf, "ignore-table" if any { $_->{unsafe} && $_->{table} } @{$bootloader->{entries}};
-
-    push @conf, map_each { "disk=$::a bios=$::b" } %{$bootloader->{bios}};
-
-    foreach my $entry (@{$bootloader->{entries}}) {
-	push @conf, "$entry->{type}=" . $file2fullname->($entry->{kernel_or_dev});
-	my @entry_conf;
-	push @entry_conf, "label=" . make_label_lilo_compatible($entry->{label});
-
-	if ($entry->{type} eq "image") {		
-	    push @entry_conf, "root=$entry->{root}" if $entry->{root};
-	    push @entry_conf, "initrd=" . $file2fullname->($entry->{initrd}) if $entry->{initrd};
-	    push @entry_conf, qq(append="$entry->{append}") if $entry->{append};
-	    push @entry_conf, "vga=$entry->{vga}" if $entry->{vga};
-	    push @entry_conf, $entry->{'read-write'} ? "read-write" : "read-only";
-	    push @entry_conf, grep { $entry->{$_} } qw(optional);
-	} else {
-	    delete $entry->{unsafe} if $entry->{table}; #- we can't have both
-	    push @entry_conf, map { "$_=$entry->{$_}" } grep { $entry->{$_} } qw(table boot-as);
-	    push @entry_conf, grep { $entry->{$_} } qw(unsafe master-boot);
-		
-	    if ($entry->{table}) {
-		#- hum, things like table=c: are needed for some os2 cases,
-		#- in that case $hd below is undef
-		my $hd = fs::get::device2part($entry->{table}, $all_hds->{hds});
-		if ($hd && $hd != $sorted_hds[0]) {		       
-		    #- boot off the nth drive, so reverse the BIOS maps
-		    my $nb = sprintf("0x%x", 0x80 + (find_index { $hd == $_ } @sorted_hds));
-		    $entry->{mapdrive} ||= { '0x80' => $nb, $nb => '0x80' }; 
-		}
-	    }
-	    if ($entry->{mapdrive}) {
-		push @entry_conf, map_each { "map-drive=$::a", "   to=$::b" } %{$entry->{mapdrive}};
-	    }
-	}
-	push @entry_conf, "password=$entry->{password}" if $entry->{password};
-	push @entry_conf, "restricted" if $entry->{restricted};
-
-	push @conf, map { "\t$_" } @entry_conf;
-    }
-    my $f = arch() =~ /ia64/ ? "$::prefix/boot/efi/elilo.conf" : "$::prefix/etc/lilo.conf";
-
-    log::l("writing lilo config to $f");
-    renamef($f, "$f.old");
-    output_with_perm($f, $bootloader->{password} ? 0600 : 0644, map { "$_\n" } @conf);
-}
-
-sub install_lilo {
-    my ($bootloader, $all_hds) = @_;
-
-    if (my ($install) = $bootloader->{method} =~ /lilo-(text|menu)/) {
-	$bootloader->{install} = $install;
-    } else {
-	delete $bootloader->{install};
-    }
-    output("$::prefix/boot/message-text", $bootloader->{message}) if $bootloader->{message};
-    symlinkf "message-" . ($bootloader->{method} ne 'lilo-graphic' ? 'text' : 'graphic'), "$::prefix/boot/message";
-
-    write_lilo($bootloader, $all_hds);
-
-    when_config_changed_lilo($bootloader);
-
-    configure_kdm_BootManager('Lilo');
-}
-
-sub install_raw_lilo {
-    my ($o_force_answer) = @_;
-
-    my $error;
-    my $answer = $o_force_answer || '';
-    run_program::rooted($::prefix, "echo $answer | lilo", '2>', \$error) or die "lilo failed: $error";
-}
-
-sub when_config_changed_lilo {
-    my ($bootloader) = @_;
-    if (!$::testing && arch() !~ /ia64/ && $bootloader->{method} =~ /lilo/) {
-	log::l("Installing boot loader on $bootloader->{boot}...");
-	install_raw_lilo($bootloader->{force_lilo_answer});
-    }
-}
-
-#- NB: ide is lower than scsi, this is important for sort_hds_according_to_bios()
-sub hd2bios_kind {
-    my ($hd) = @_;
-    lc(join('_', $hd->{bus}, $hd->{host}));
-}
-
-sub mixed_kind_of_disks {
-    my ($hds) = @_;
-    (uniq_ { hd2bios_kind($_) } @$hds) > 1;
-}
-
-sub sort_hds_according_to_bios {
-    my ($bootloader, $all_hds) = @_;
-    my $boot_hd = fs::get::device2part($bootloader->{first_hd_device} || $bootloader->{boot}, $all_hds->{hds}); #- $boot_hd is undefined when installing on floppy
-    my $boot_kind = $boot_hd && hd2bios_kind($boot_hd);
-
-    my $translate = sub {
-	my ($hd) = @_;
-	my $kind = hd2bios_kind($hd);
-	$boot_hd ? ($hd == $boot_hd ? 0 : $kind eq $boot_kind ? 1 : 2) . "_$kind" : $kind;
-    };
-    sort { $translate->($a) cmp $translate->($b) } @{$all_hds->{hds}};
-}
-
-sub device_string2grub {
-    my ($dev, $legacy_floppies, $sorted_hds) = @_;
-    if (my $device = fs::get::device2part($dev, [ @$sorted_hds, fs::get::hds_fstab(@$sorted_hds) ])) {
-	device2grub($device, $sorted_hds);
-    } elsif (my $floppy = fs::get::device2part($dev, $legacy_floppies)) {
-	my $bios = find_index { $floppy eq $_ } @$legacy_floppies;
-	"(fd$bios)";
-    } else {
-	internal_error("unknown device $dev");
-    }
-}
-sub device2grub {
-    my ($device, $sorted_hds) = @_;
-    my ($hd, $part_nb) = 
-      $device->{rootDevice} ?
-	(fs::get::device2part($device->{rootDevice}, $sorted_hds), $device->{device} =~ /(\d+)$/) :
-	$device;
-    my $bios = find_index { $hd eq $_ } @$sorted_hds;
-    my $part_string = defined $part_nb ? ',' . ($part_nb - 1) : '';    
-    "(hd$bios$part_string)";
-}
-
-sub read_grub_device_map() {
-    my %grub2dev = map { m!\((.*)\) /dev/(.*)$! } cat_("$::prefix/boot/grub/device.map");
-    \%grub2dev;
-}
-sub write_grub_device_map {
-    my ($legacy_floppies, $sorted_hds) = @_;
-    my $f = "$::prefix/boot/grub/device.map";
-    renamef($f, "$f.old");
-    output($f,
-	   (map_index { "(fd$::i) /dev/$_->{device}\n" } @$legacy_floppies),
-	   (map_index { "(hd$::i) /dev/$_->{device}\n" } @$sorted_hds));
-}
-
-sub grub2dev_and_file {
-    my ($grub_file, $grub2dev, $o_block_device) = @_;
-    my ($grub_dev, $rel_file) = $grub_file =~ m!\((.*?)\)/?(.*)! or return;
-    my ($hd, $part) = split(',', $grub_dev);
-    $part = $o_block_device ? '' : defined $part && $part + 1; #- grub wants "(hdX,Y)" where lilo just want "hdY+1"
-    my $device = '/dev/' . $grub2dev->{$hd} . $part;
-    $device, $rel_file;
-}
-sub grub2dev {
-    my ($grub_file, $grub2dev, $o_block_device) = @_;
-    first(grub2dev_and_file($grub_file, $grub2dev, $o_block_device));
-}
-
-# replace dummy "(hdX,Y)" in "(hdX,Y)/boot/vmlinuz..." by appropriate path if needed
-sub grub2file {
-    my ($grub_file, $grub2dev, $fstab) = @_;
-    if (my ($device, $rel_file) = grub2dev_and_file($grub_file, $grub2dev)) {	
-	if (my $part = fs::get::device2part($device, $fstab)) {
-	    my $mntpoint = $part->{mntpoint} || '';
-	    ($mntpoint eq '/' ? '' : $mntpoint) . '/' . $rel_file;
-	} else {
-	    log::l("ERROR: unknown device $device (computed from $grub_file)");
-	    $grub_file;
-	}
-    } else {
-	$grub_file;
-    }
-}
-
-sub write_grub {
-    my ($bootloader, $all_hds) = @_;
-
-    my $fstab = [ fs::get::fstab($all_hds) ]; 
-    my @legacy_floppies = detect_devices::floppies();
-    my @sorted_hds = sort_hds_according_to_bios($bootloader, $all_hds);
-    write_grub_device_map(\@legacy_floppies, \@sorted_hds);
-
-    if (get_append_with_key($bootloader, 'console') =~ /ttyS(\d),(\d+)/) {
-	$bootloader->{serial} ||= "--unit=$1 --speed=$2";
-	$bootloader->{terminal} ||= "--timeout=" . ($bootloader->{timeout} || 0) . " console serial";
-    }
-
-    my $file2grub = sub {
-	my ($file) = @_;
-	if ($file =~ m!^\(.*\)/!) {
-	    $file; #- it's already in grub format
-	} else {
-	    my ($part, $rel_file) = fs::get::file2part($fstab, $_[0], 'keep_simple_symlinks');
-	    device2grub($part, \@sorted_hds) . $rel_file;
-	}
-    };
-    {
-	my @conf;
-
-	push @conf, map { "$_ $bootloader->{$_}" } grep { $bootloader->{$_} } qw(timeout color serial terminal);
-	push @conf, map { $_ . ' ' . $file2grub->($bootloader->{$_}) } grep { $bootloader->{$_} } qw(splashimage);
-
-	eval {
-	    push @conf, "default " . (find_index { $_->{label} eq $bootloader->{default} } @{$bootloader->{entries}});
-	};
-
-	foreach (@{$bootloader->{entries}}) {
-	    my $title = "\ntitle $_->{label}";
-
-	    if ($_->{type} eq "image") {
-		my $vga = $_->{vga} || $bootloader->{vga};
-		push @conf, $title,
-		  join(' ', 'kernel', $file2grub->($_->{kernel_or_dev}),
-		       if_($_->{root}, $_->{root} =~ /loop7/ ? "root=707" : "root=$_->{root}"), #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-		       $_->{append},
-		       if_($_->{'read-write'}, 'rw'),
-		       if_($vga && $vga ne "normal", "vga=$vga"));
-		push @conf, "initrd " . $file2grub->($_->{initrd}) if $_->{initrd};
-	    } else {
-		my $dev = eval { device_string2grub($_->{kernel_or_dev}, \@legacy_floppies, \@sorted_hds) };
-		if (!$dev) {
-		    log::l("dropping bad entry $_->{label} for unknown device $_->{kernel_or_dev}");
-		    next;
-		}
-		push @conf, $title, "root $dev";
-
-		if ($_->{table}) {
-		    if (my $hd = fs::get::device2part($_->{table}, \@sorted_hds)) {
-			if (my $bios = find_index { $hd eq $_ } @sorted_hds) {
-			    #- boot off the nth drive, so reverse the BIOS maps
-			    my $nb = sprintf("0x%x", 0x80 + $bios);
-			    $_->{mapdrive} ||= { '0x80' => $nb, $nb => '0x80' }; 
-			}
-		    }
-		}
-		if ($_->{mapdrive}) {
-		    push @conf, map_each { "map ($::b) ($::a)" } %{$_->{mapdrive}};
-		    push @conf, "makeactive";
-		}
-		push @conf, "chainloader +1";
-	    }
-	}
-	my $f = "$::prefix/boot/grub/menu.lst";
-	log::l("writing grub config to $f");
-	renamef($f, "$f.old");
-	output($f, map { "$_\n" } @conf);
-    }
-    {
-	my $f = "$::prefix/boot/grub/install.sh";
-	my $dev = device_string2grub($bootloader->{boot}, \@legacy_floppies, \@sorted_hds);
-	my ($stage1, $stage2, $menu_lst) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
-	renamef($f, "$f.old");
-	output_with_perm("$::prefix/boot/grub/install.sh", 0755,
-"grub --device-map=/boot/grub/device.map --batch <<EOF
-install $stage1 d $dev $stage2 p $menu_lst
-quit
-EOF
-");
-    }
-
-    check_enough_space();
-}
-
-sub configure_kdm_BootManager {
-    my ($name) = @_;
-    eval { update_gnomekderc("$::prefix/usr/share/config/kdm/kdmrc", 'Shutdown' => (
-	BootManager => $name
-    )) };
-}
-
-sub install_grub {
-    my ($bootloader, $all_hds) = @_;
-
-    write_grub($bootloader, $all_hds);
-
-    install_raw_grub() if !$::testing;
-
-    configure_kdm_BootManager('Grub');
-}
-sub install_raw_grub() {
-    log::l("Installing boot loader...");
-    my $error;
-    run_program::rooted($::prefix, "sh", '/boot/grub/install.sh', "2>", \$error) or die "grub failed: $error";
-}
-
-sub when_config_changed_grub {
-    my ($_bootloader) = @_;
-    #- do not do anything
-}
-
-sub action {
-    my ($bootloader, $action, @para) = @_;
-
-    my $main_method = main_method($bootloader->{method});
-    my $f = $bootloader::{$action . '_' . $main_method} or die "unknown bootloader method $bootloader->{method} ($action)";
-    $f->($bootloader, @para);
-}
-
-sub install {
-    my ($bootloader, $all_hds) = @_;
-
-    if (my $part = fs::get::device2part($bootloader->{boot}, [ fs::get::fstab($all_hds) ])) {
-	die N("You can not install the bootloader on a %s partition\n", $part->{fs_type})
-	  if $part->{fs_type} eq 'xfs';
-    }
-    $bootloader->{keytable} = keytable($bootloader->{keytable});
-    action($bootloader, 'install', $all_hds);
-}
-
-sub update_for_renumbered_partitions {
-    my ($in, $renumbering, $all_hds) = @_;
-
-    my @configs = grep { $_->{content} } config_files();
-    $_->{new} = $_->{orig} = $_->{content} foreach @configs;
-
-    my @sorted_hds; {
- 	my $grub2dev = read_grub_device_map();
-	map_each {
-	    $sorted_hds[$1] = fs::get::device2part($::b, $all_hds->{hds}) if $::a =~ /hd(\d+)/;
-	} %$grub2dev;
-    }
-
-    foreach (@$renumbering) {
-	my ($old, $new) = @$_;
-	log::l("renaming $old -> $new");
-	$_->{new} =~ s/\b$old/$new/g foreach @configs;
-
-	any { $_->{name} eq 'grub' } @configs or next;
-
-	my ($old_grub, $new_grub) = map { device_string2grub($_, [], \@sorted_hds) } $old, $new;
-	log::l("renaming $old_grub -> $new_grub");
-	$_->{new} =~ s/\Q$old_grub/$new_grub/g foreach @configs;
-    }
-
-    my @changed_configs = grep { $_->{orig} ne $_->{new} } @configs or return 1; # no need to update
-
-    $in->ask_okcancel('', N("Your bootloader configuration must be updated because partition has been renumbered")) or return;
-
-    foreach (@changed_configs) {
-	renamef("$::prefix/$_->{file}", "$::prefix/$_->{file}.old");
-	output("$::prefix/$_->{file}", $_->{new});
-    }
-
-    my $main_method = detect_main_method($all_hds);
-    my @needed = map { 
-	$_ eq 'grub' ? 'grub_install' : $_;
-    } $main_method ? $main_method : ('lilo', 'grub');
-
-    if (intersection(\@needed, [ map { $_->{name} } @changed_configs ])) {
-	$in->ask_warn('', N("The bootloader can not be installed correctly. You have to boot rescue and choose \"%s\"", 
-			    N("Re-install Boot Loader")));
-    }
-    1;
-}
-
-1;
diff --git a/perl-install/bootsplash.pm b/perl-install/bootsplash.pm
deleted file mode 100644
index 46c84c72e..000000000
--- a/perl-install/bootsplash.pm
+++ /dev/null
@@ -1,207 +0,0 @@
-package bootsplash;
-
-use common;
-use Xconfig::resolution_and_depth;
-use vars qw(@ISA %EXPORT_TAGS);
-
-@ISA = qw(Exporter);
-%EXPORT_TAGS = (drawing => [qw(rectangle2xywh xywh2rectangle distance farthest nearest)]);
-@EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-my $themes_dir = "$::prefix/usr/share/bootsplash/themes";
-my $themes_config_dir = "$::prefix/etc/bootsplash/themes";
-my $sysconfig_file = "$::prefix/etc/sysconfig/bootsplash";
-my $bootsplash_scripts = "$::prefix/usr/share/bootsplash/scripts";
-my $default_theme = 'Mandrivalinux';
-our $default_thumbnail = '/usr/share/libDrakX/pixmaps/nosplash_thumb.png';
-our @resolutions = uniq(map { "$_->{X}x$_->{Y}" } Xconfig::resolution_and_depth::bios_vga_modes());
-
-sub get_framebuffer_resolution {
-    require bootloader;
-    require fsedit;
-    my $bootloader = bootloader::read(fsedit::get_hds());
-    my $x_res = Xconfig::resolution_and_depth::from_bios($bootloader->{default_vga});
-    $x_res ?
-      ($x_res->{X} . 'x' . $x_res->{Y}, 1) :
-      (first(@resolutions), 0);
-}
-
-sub themes_read_sysconfig {
-    my ($res) = @_;
-    my %theme = (
-                 name => $default_theme,
-                 enabled => 1,
-                 keep_logo => 1
-                );
-    if (-r $sysconfig_file) {
-        local $_;
-        foreach (cat_($sysconfig_file)) {
-            /^SPLASH=no/ and $theme{enabled} = 0;
-            /^THEME=(.*)/ && -f theme_get_image_for_resolution($1, $res) and $theme{name} = $1;
-            /^LOGO_CONSOLE=(.*)/ and $theme{keep_logo} = $1 ne "no";
-        }
-    }
-    \%theme;
-}
-
-sub theme_get_image_for_resolution {
-    my ($theme, $res) = @_;
-    $themes_dir . '/' . $theme . '/images/bootsplash-' . $res . ".jpg";
-}
-
-sub theme_get_config_for_resolution {
-    my ($theme, $res) = @_;
-    $themes_config_dir . '/' . $theme . '/config/bootsplash-' . $res . ".cfg";
-}
-
-sub theme_exists_for_resolution {
-    my ($theme, $res) = @_;
-    -f theme_get_image_for_resolution($theme, $res) && -f theme_get_config_for_resolution($theme, $res);
-}
-
-sub themes_list() {
-    grep { !/^\./ && -d $themes_dir } sort(all($themes_dir));
-}
-
-sub themes_list_for_resolution {
-    my ($res) = @_;
-    grep { theme_exists_for_resolution($_, $res) } themes_list();
-}
-
-sub switch {
-    my ($theme) = @_;
-    if ($::testing) {
-        print "enabling bootsplash theme $theme\n";
-    } else {
-        #- theme scripts will update SPLASH value in sysconfig file
-        system($bootsplash_scripts . '/switch-themes', $theme);
-    }
-}
-
-sub remove() {
-    if ($::testing) {
-        print "disabling bootsplash theme\n";
-    } else {
-        system($bootsplash_scripts . '/remove-theme');
-    }
-}
-
-sub set_logo_console {
-    my ($keep_logo) = @_;
-    my $logo_console = $keep_logo ? 'theme' : 'no';
-    substInFile { s/^LOGO_CONSOLE=.*/LOGO_CONSOLE=$logo_console/ } $sysconfig_file;
-}
-
-sub create_path {
-    my ($file) = @_;
-    require File::Basename;
-    my $dir = File::Basename::dirname($file);
-    -d $dir or mkdir_p($dir);
-}
-
-sub theme_set_image_for_resolution {
-    my ($name, $res, $source_image) = @_;
-    my $dest_image = theme_get_image_for_resolution($name, $res);
-    create_path($dest_image);
-    #- Append an exclamation point to the geometry to force the image size to exactly the size you specify.
-    system('convert', '-geometry', $res . '!', $source_image, $dest_image);
-    system($bootsplash_scripts . '/rewritejpeg',  $dest_image);
-}
-
-sub theme_read_config_for_resolution {
-    my ($theme, $res) = @_;
-    +{ getVarsFromSh(theme_get_config_for_resolution($theme, $res)) };
-}
-
-sub theme_write_config_for_resolution {
-    my ($name, $res, $conf) = @_;
-
-    my $config = theme_get_config_for_resolution($name, $res);
-    create_path($config);
-    my $jpeg = theme_get_image_for_resolution($name, $res);
-    output($config,
-	   qq(# This is the configuration file for the $res bootsplash picture
-# this file is necessary to specify the coordinates of the text box on the
-# splash screen.
-
-# config file version
-version=3
-
-# should the picture be displayed?
-state=1
-
-# fgcolor is the text forground color.
-# bgcolor is the text background (i.e. transparent) color.
-fgcolor=7
-bgcolor=0
-
-# (tx, ty) are the (x, y) coordinates of the text window in pixels.
-# tw/th is the width/height of the text window in pixels.
-tx=$conf->{tx}
-ty=$conf->{ty}
-tw=$conf->{tw}
-th=$conf->{th}
-
-# name of the picture file (full path recommended)
-jpeg=$jpeg
-silentjpeg=$jpeg
-
-progress_enable=1
-
-overpaintok=1
-
-LOGO_CONSOLE=$conf->{LOGO_CONSOLE}
-));
-}
-
-sub rectangle2xywh {
-    my ($rect) = @_;
-
-    my $x = min($rect->[0]{X} , $rect->[1]{X});
-    my $y = min($rect->[0]{Y} , $rect->[1]{Y});
-    my $w = abs($rect->[0]{X} - $rect->[1]{X});
-    my $h = abs($rect->[0]{Y} - $rect->[1]{Y});
-    ($x, $y, $w, $h);
-}
-
-sub xywh2rectangle {
-    my ($x, $y, $w, $h) = @_;
-    [ { X => $x, Y => $y }, { X => $x+$w, Y => $y+$w } ];
-}
-
-sub distance {
-    my ($p1, $p2) = @_;
-    sqr($p1->{X} - $p2->{X}) + sqr($p1->{Y} - $p2->{Y});
-}
-
-sub farthest {
-    my ($point, @others) = @_;
-    my $i = 0;
-    my $dist = 0;
-    my $farthest;
-    foreach (@others) {
-	my $d = distance($point, $_);
-	if ($d >= $dist) {
-	    $dist = $d;
-	    $farthest = $_;
-	}
-    }
-    $farthest;
-}
-
-sub nearest {
-    my ($point, @others) = @_;
-    my $i = 0;
-    my $dist;
-    my $nearest;
-    foreach (@others) {
-	my $d = distance($point, $_);
-	if (! defined $dist || $d < $dist) {
-	    $dist = $d;
-	    $nearest = $_;
-	}
-    }
-    $nearest;
-}
-
-1;
diff --git a/perl-install/c.pm b/perl-install/c.pm
deleted file mode 100644
index f1904ebc4..000000000
--- a/perl-install/c.pm
+++ /dev/null
@@ -1,19 +0,0 @@
-package c; # $Id$
-
-use vars qw($AUTOLOAD);
-
-use c::stuff;
-use MDK::Common;
-
-sub AUTOLOAD() {
-    $AUTOLOAD =~ /::(.*)/ or return;
-    my @l = eval { &{$c::stuff::{$1}} };
-    if (my $err = $@) {
-	$err =~ /Undefined subroutine &main::/ ?
-	  die("can not find function $AUTOLOAD\n" . backtrace()) :
-	  die($err);	
-    }
-    wantarray() ? @l : $l[0];
-}
-
-1;
diff --git a/perl-install/c/.cvsignore b/perl-install/c/.cvsignore
deleted file mode 100644
index 665b57e54..000000000
--- a/perl-install/c/.cvsignore
+++ /dev/null
@@ -1,9 +0,0 @@
-Makefile
-Makefile_c
-stuff.c
-stuff.bs
-pm_to_blib
-Makefile_c.old
-blib
-stuff.xs
-pcmcia_probe.c
diff --git a/perl-install/c/Makefile b/perl-install/c/Makefile
deleted file mode 100644
index 0d09a8919..000000000
--- a/perl-install/c/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-.PHONY: clean
-
-MAKEIT = $(MAKE) -f Makefile_c LD_RUN_PATH=
-
-stuff: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKEIT) || $(MAKEIT)
-	rm -f ../auto/c ; ln -s ../c/blib/arch/auto ../auto/c
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o stuff.xs probe.c
-
-stuff.xs: %: %.pl
-	rm -f $@
-	perl $< > $@
-	chmod a-w $@
diff --git a/perl-install/c/Makefile.PL b/perl-install/c/Makefile.PL
deleted file mode 100644
index 46960e36d..000000000
--- a/perl-install/c/Makefile.PL
+++ /dev/null
@@ -1,25 +0,0 @@
-use MDK::Common;
-use ExtUtils::MakeMaker;
-use Config;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-my $lib = arch() =~ /x86_64/ ? 'lib64' : 'lib';
-
-my $libs = '-lldetect -lext2fs';
-$libs .= ' -lrpm -lrpmdb -lrpmio -lpopt -lz';
-
-my $pcmcia_dir = $Config{archname} =~ /i.86/ ? '../../mdk-stage1/pcmcia_' : '';
-
-symlink "$pcmcia_dir/probe.c", "probe.c" if $pcmcia_dir;
-
-WriteMakefile(
-    'NAME'	=> 'stuff',
-    'OPTIMIZE'  => '-Os',
-    'MAKEFILE'  => 'Makefile_c',
-    'OBJECT'    => "stuff.o smp.o sbus.o silo.o smp-dmi.o" . ($pcmcia_dir && " probe.o"),
-    'VERSION_FROM' => 'stuff.pm', # finds $VERSION
-    'LIBS'	=> [$libs],   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-    'INC'	=> "-I/usr/include/rpm " . ($pcmcia_dir && " -I$pcmcia_dir -I$pcmcia_dir/.."), 
-);
diff --git a/perl-install/c/README b/perl-install/c/README
deleted file mode 100644
index b5ad1224f..000000000
--- a/perl-install/c/README
+++ /dev/null
@@ -1,3 +0,0 @@
-md5.c, md5_crypt.c and md5.h are taken from pam (dir modules/pam_pwdb)
-
-smp.c is taken from RedHat's install
diff --git a/perl-install/c/sbus.c b/perl-install/c/sbus.c
deleted file mode 100644
index 85d44fa79..000000000
--- a/perl-install/c/sbus.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* This file is inspired from source code of kudzu from Red Hat, Inc.
- * It has been modified to keep only "what is needed" in C, the prom_walk
- * has been rewritten in perl for convenience :-)
- *
- * Copyright notice from original version.
- * sbus.c: Probe for Sun SBUS and UPA framebuffers using OpenPROM,
- *         SBUS SCSI and Ethernet cards and SBUS or EBUS audio chips.
- *
- * Copyright (C) 1998, 1999 Jakub Jelinek (jj@ultra.linux.cz)
- *           (C) 1999 Red Hat, Inc.
- * 
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- */
-
-#ifdef __sparc__
-
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-
-static char *promdev = "/dev/openprom";
-static int promfd = -1;
-static int prom_current_node;
-#define MAX_PROP        128
-#define MAX_VAL         (4096-128-4)
-static char buf[4096];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-int prom_open()
-{
-    int prom_root_node;
-
-    if (promfd == -1) {
-        promfd = open(promdev, O_RDONLY);
-	if (promfd == -1)
-	    return 0;
-    }
-    prom_root_node = prom_getsibling(0);
-    if (!prom_root_node) {
-        close(promfd);
-	promfd = -1;
-	return 0;
-    }
-    return prom_root_node;
-}
-
-void prom_close()
-{
-    if (promfd != -1) {
-        close(promfd);
-	promfd = -1;
-    }
-}
-
-int prom_getsibling(int node)
-{
-    DECL_OP(sizeof(int));
-        
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMNEXT, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-int prom_getchild(int node)
-{
-    DECL_OP(sizeof(int));
-        
-    if (!node || node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMCHILD, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-char *prom_getopt(char *var, int *lenp)
-{
-    DECL_OP(MAX_VAL);
-        
-    strcpy (op->oprom_array, var);
-    if (ioctl (promfd, OPROMGETOPT, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-void prom_setopt(char *var, char *value) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    strcpy (op->oprom_array + strlen (var) + 1, value);
-    ioctl (promfd, OPROMSETOPT, op);
-}
-
-char *prom_getproperty(char *prop, int *lenp)
-{
-    DECL_OP(MAX_VAL);
-        
-    strcpy (op->oprom_array, prop);
-    if (ioctl (promfd, OPROMGETPROP, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-int prom_getbool(char *prop)
-{
-    DECL_OP(0);
-
-    *(int *)op->oprom_array = 0;
-    for (;;) {
-        op->oprom_size = MAX_PROP;
-	if (ioctl(promfd, OPROMNXTPROP, op) < 0)
-	    return 0;
-	if (!op->oprom_size)
-	    return 0;
-	if (!strcmp (op->oprom_array, prop))
-	    return 1;
-    }
-}
-
-int prom_pci2node(int bus, int devfn) {
-    DECL_OP(2*sizeof(int));
-    
-    ((int *)op->oprom_array)[0] = bus;
-    ((int *)op->oprom_array)[1] = devfn;
-    if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-#else
-int prom_open() { return 0; }
-void prom_close() {}
-int prom_getsibling(int node) { return 0; }
-int prom_getchild(int node) { return 0; }
-char *prom_getopt(char *var, int *lenp) { return 0; /* NULL */ }
-void prom_setopt(char *var, char *value) {}
-char *prom_getproperty(char *prop, int *lenp) { return 0; /* NULL */ }
-int prom_getbool(char *prop) { return 0; }
-int prom_pci2node(int bus, int devfn) { return 0; }
-#endif /* __sparc__ */
diff --git a/perl-install/c/silo.c b/perl-install/c/silo.c
deleted file mode 100644
index 2fd621f4e..000000000
--- a/perl-install/c/silo.c
+++ /dev/null
@@ -1,817 +0,0 @@
-/* silo.c: Conversions between SCSI and IDE disk names
- *	   and OpenPROM fully qualified paths.
- *
- * Modified for DrakX light integration.
- * Copyright (C) 1999, 2000 Jakub Jelinek <jakub@redhat.com>
- * 
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef __sparc__
-
-#define _GNU_SOURCE
-#include <fcntl.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/ioctl.h>
-#include <asm/openpromio.h>
-#include <ctype.h>
-#include <dirent.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-
-#ifndef OPROMSETCUR
-#define OPROMSETCUR	0x20004FF0
-#define OPROMPCI2NODE	0x20004FF1
-#define OPROMPATH2NODE	0x20004FF2
-#endif
-
-static int hasaliases;
-static char *promdev = "/dev/openprom";
-static int promfd;
-static char sd_targets[10] = "31204567";
-static int p1275 = 0;
-static int prom_root_node, prom_current_node;
-static int promvers;
-static void (*prom_walk_callback)(int node);
-static char prom_path[1024];
-#define MAX_PROP	128
-#define MAX_VAL		(4096-128-4)
-static char buf[4096];
-static char regstr[40];
-#define DECL_OP(size) struct openpromio *op = (struct openpromio *)buf; op->oprom_size = (size)
-
-static int
-prom_setcur(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMSETCUR, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_getsibling(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMNEXT, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_getchild(int node) {
-    DECL_OP(sizeof(int));
-    
-    if (!node || node == -1) return 0;
-    *(int *)op->oprom_array = node;
-    if (ioctl (promfd, OPROMCHILD, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static char *
-prom_getproperty(char *prop, int *lenp) {
-    DECL_OP(MAX_VAL);
-    
-    strcpy (op->oprom_array, prop);
-    if (ioctl (promfd, OPROMGETPROP, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-static char *
-prom_getopt(char *var, int *lenp) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    if (ioctl (promfd, OPROMGETOPT, op) < 0)
-        return 0;
-    if (lenp) *lenp = op->oprom_size;
-    return op->oprom_array;
-}
-
-static void
-prom_setopt(char *var, char *value) {
-    DECL_OP(MAX_VAL);
-
-    strcpy (op->oprom_array, var);
-    strcpy (op->oprom_array + strlen (var) + 1, value);
-    ioctl (promfd, OPROMSETOPT, op);
-}
-
-static int
-prom_getbool(char *prop) {
-    DECL_OP(0);
-
-    *(int *)op->oprom_array = 0;
-    for (;;) {
-        op->oprom_size = MAX_PROP;
-            if (ioctl(promfd, OPROMNXTPROP, op) < 0)
-                return 0;
-            if (!op->oprom_size)
-                return 0;
-            if (!strcmp (op->oprom_array, prop))
-                return 1;
-    }
-}
-
-static int
-prom_pci2node(int bus, int devfn) {
-    DECL_OP(2*sizeof(int));
-    
-    ((int *)op->oprom_array)[0] = bus;
-    ((int *)op->oprom_array)[1] = devfn;
-    if (ioctl (promfd, OPROMPCI2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-static int
-prom_path2node(char *path) {
-    DECL_OP(MAX_VAL);
-    
-    strcpy (op->oprom_array, path);
-    if (ioctl (promfd, OPROMPATH2NODE, op) < 0)
-        return 0;
-    prom_current_node = *(int *)op->oprom_array;
-    return *(int *)op->oprom_array;
-}
-
-#define PW_TYPE_SBUS	1
-#define PW_TYPE_PCI	2
-#define PW_TYPE_EBUS	3
-
-static void
-prom_walk(char *path, int parent, int node, int type) {
-    int nextnode;
-    int len, ntype = type;
-    char *prop;
-    
-    prop = prom_getproperty("name", &len);
-    if (prop && len > 0) {
-        if ((!strcmp(prop, "sbus") || !strcmp(prop, "sbi")) && !type)
-            ntype = PW_TYPE_SBUS;
-        else if (!strcmp(prop, "ebus") && type == PW_TYPE_PCI)
-            ntype = PW_TYPE_EBUS;
-        else if (!strcmp(prop, "pci") && !type)
-            ntype = PW_TYPE_PCI;
-    }
-    *path = '/';
-    strcpy (path + 1, prop);
-    prop = prom_getproperty("reg", &len);
-    if (prop && len >= 4) {
-        unsigned int *reg = (unsigned int *)prop;
-        int cnt = 0;
-        if (!p1275 || (type == PW_TYPE_SBUS))
-	    sprintf (regstr, "@%x,%x", reg[0], reg[1]);
-        else if (type == PW_TYPE_PCI) {
-	    if ((reg[0] >> 8) & 7)
-		sprintf (regstr, "@%x,%x", (reg[0] >> 11) & 0x1f, (reg[0] >> 8) & 7);
-	    else
-		sprintf (regstr, "@%x", (reg[0] >> 11) & 0x1f);
-        } else if (len == 4)
-	    sprintf (regstr, "@%x", reg[0]);
-        else {
-	    unsigned int regs[2];
-
-	    /* Things get more complicated on UPA. If upa-portid exists,
-	       then address is @upa-portid,second-int-in-reg, otherwise
-	       it is @first-int-in-reg/16,second-int-in-reg (well, probably
-	       upa-portid always exists, but just to be safe). */
-	    memcpy (regs, reg, sizeof(regs));
-	    prop = prom_getproperty("upa-portid", &len);
-	    if (prop && len == 4) {
-		reg = (unsigned int *)prop;
-		sprintf (regstr, "@%x,%x", reg[0], regs[1]); 
-	    } else
-	        sprintf (regstr, "@%x,%x", regs[0] >> 4, regs[1]);
-	}
-        for (nextnode = prom_getchild(parent); nextnode; nextnode = prom_getsibling(nextnode)) {
-	    prop = prom_getproperty("name", &len);
-	    if (prop && len > 0 && !strcmp (path + 1, prop))
-		cnt++;
-	}
-        if (cnt > 1)
-	    strcat (path, regstr);
-    }
-
-    prom_walk_callback(node);
-
-    nextnode = prom_getchild(node);
-    if (nextnode)
-        prom_walk(strchr (path, 0), node, nextnode, ntype);
-    nextnode = prom_getsibling(node);
-    if (nextnode)
-        prom_walk(path, parent, nextnode, type);
-}
-
-static int
-prom_init(int mode) {    
-    struct utsname u;
-
-    promfd = open(promdev, mode);
-    if (promfd == -1)
-	return -1;
-    prom_root_node = prom_getsibling(0);
-    if (!prom_root_node)
-	return -1;
-
-    if (!uname (&u) && !strcmp (u.machine, "sparc64"))
-	p1275 = 1;
-    return 0;
-}
-
-#define SDSK_TYPE_IDE	1
-#define SDSK_TYPE_SD	2
-#define SDSK_TYPE_PLN	3
-#define SDSK_TYPE_FC	4
-
-static struct sdsk_disk {
-    unsigned int prom_node;
-    unsigned int type, host, hi, mid, lo;
-    unsigned char *prom_name;
-} *hd = NULL, *sd = NULL;
-static int hdlen, sdlen;
-
-static void
-scan_walk_callback(int node) {
-    int nextnode;
-    char *prop;
-    int len, disk;
-    static int v0ctrl = 0;
-
-    for (disk = 0; disk < hdlen + sdlen; disk++) {
-	if (hd[disk].prom_node == node) {
-	    switch (hd[disk].type) {
-	    case SDSK_TYPE_IDE:
-		for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0 && (!strcmp (prop, "ata") || !strcmp (prop, "disk")))
-			break;
-		}
-		if (!nextnode)
-		    continue;
-		if (prop[0] == 'a')
-		    sprintf (prop, "/ata@%x,0/cmdk@%x,0", hd[disk].hi, hd[disk].lo);
-		else
-		    sprintf (prop, "/disk@%x,0", hd[disk].hi * 2 + hd[disk].lo);
-		break;
-	    case SDSK_TYPE_SD:
-		for (nextnode = prom_getchild(node); nextnode; nextnode = prom_getsibling(nextnode)) {
-		    prop = prom_getproperty("compatible", &len);
-		    if (prop && len > 0 && !strcmp (prop, "sd"))
-			break;
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0 && (!strcmp (prop, "sd") || !strcmp (prop, "disk")))
-			break;
-		}
-		if (!nextnode || hd[disk].hi)
-		    continue;
-		if (promvers) {
-		    char name[1024];
-		    prop = prom_getproperty("name", &len);
-		    if (prop && len > 0)
-			strcpy (name, prop);
-		    else
-			strcpy (name, "sd");
-		    if (!prop)
-			prop = ((struct openpromio *)buf)->oprom_array;
-		    sprintf (prop, "/%s@%x,%x", name, hd[disk].mid, hd[disk].lo);
-		} else {
-		    int i;
-		    for (i = 0; sd_targets[i]; i++)
-			if (sd_targets[i] == '0' + hd[disk].mid)
-			    break;
-		    if (!sd_targets[i])
-			i = hd[disk].mid;
-		    sprintf (prop, "sd(%d,%d,", v0ctrl, i);
-		}
-		break;
-	    case SDSK_TYPE_PLN:
-		prop = ((struct openpromio *)buf)->oprom_array;
-		sprintf (prop, "/SUNW,pln@%x,%x/SUNW,ssd@%x,%x",
-			 hd[disk].lo & 0xf0000000, hd[disk].lo & 0xffffff,
-			 hd[disk].hi, hd[disk].mid);
-		break;
-	    case SDSK_TYPE_FC:
-		prop = ((struct openpromio *)buf)->oprom_array;
-		sprintf (prop, "/sf@0,0/ssd@w%08x%08x,%x", hd[disk].hi, hd[disk].mid, hd[disk].lo);
-		break;
-	    default:
-		continue;
-	    }
-	    hd[disk].prom_name = malloc (strlen (prom_path) + strlen(prop) + 3);
-	    if (!hd[disk].prom_name)
-		continue;
-	    if (promvers)
-		strcpy (hd[disk].prom_name, prom_path);
-	    else
-		hd[disk].prom_name[0] = '\0';
-	    strcat (hd[disk].prom_name, prop);
-	}
-    }
-    v0ctrl++;
-}
-
-static int
-scan_ide(void) {
-    DIR * dir;
-    char path[80];
-    char buffer[512];
-    int fd, i, disk;
-    struct dirent * ent;
-    int pci_bus, pci_devfn;
-
-    if (access("/proc/ide", R_OK)) return 0;
-
-    if (!(dir = opendir("/proc/ide"))) {
-	return 1;
-    }
-
-    while ((ent = readdir(dir))) {
-	if (ent->d_name[0] == 'h' && ent->d_name[1] == 'd' &&
-	    ent->d_name[2] >= 'a' && ent->d_name[2] <= 'z' &&
-	    ent->d_name[3] == '\0') {
-	    disk = ent->d_name[2] - 'a';
-	    if (disk >= hdlen) {
-		hd = (struct sdsk_disk *)realloc(hd, ((disk&~3)+4)*sizeof(struct sdsk_disk));
-		memset (hd + hdlen, 0, ((disk&~3)+4-hdlen)*sizeof(struct sdsk_disk));
-		hdlen = (disk&~3)+4;
-	    }
-	    for (i = (disk & ~3); i <= (disk | 3); i++) {
-		if (hd[i].type)
-		    break;
-	    }
-	    if (i > (disk | 3)) {
-		sprintf(path, "/proc/ide/%s", ent->d_name);
-		if (readlink(path, buffer, 512) < 5)
-		    continue;
-		if (strncmp(buffer, "ide", 3) ||
-		    !isdigit(buffer[3]) ||
-		    buffer[4] != '/')
-		    continue;
-		buffer[4] = 0;
-		sprintf(path, "/proc/ide/%s/config", buffer);
-		if ((fd = open(path, O_RDONLY)) < 0)
-		    continue;
-		i = read(fd, buffer, 50);
-		close(fd);
-		if (i < 50) continue;
-		if (sscanf (buffer, "pci bus %x device %x ",
-			    &pci_bus, &pci_devfn) != 2)
-			continue;
-		hd[disk].prom_node = prom_pci2node (pci_bus, pci_devfn);
-	    } else
-	    	hd[disk].prom_node = hd[i].prom_node;
-	    hd[disk].type = SDSK_TYPE_IDE;
-	    hd[disk].hi = (disk & 2) >> 1;
-	    hd[disk].lo = (disk & 1);
-	}
-    }
-
-    closedir(dir);
-
-    return 0;
-}
-
-static int
-scan_scsi(void) {
-    FILE *f;
-    DIR * dir, *dirhba;
-    struct dirent * ent, *enthba;
-    struct stat st;
-    char * p, * q;
-    char buf[512];
-    char path[128];
-    int disk = 0;
-    int host, channel, id, lun;
-    int prom_node, pci_bus, pci_devfn;
-
-    if (access("/proc/scsi/scsi", R_OK)) {
-	return 0;
-    }
-
-    f = fopen("/proc/scsi/scsi", "r");
-    if (f == NULL) return 1;
-
-    if (fgets(buf, sizeof(buf), f) == NULL) {
-	fclose(f);
-	return 1;
-    }
-    if (!strcmp(buf, "Attached devices: none\n")) {
-	fclose(f);
-	return 0;
-    }
-
-    while (fgets(buf, sizeof(buf), f) != NULL) {
-	if (sscanf(buf, "Host: scsi%d Channel: %d Id: %d Lun: %d\n",
-		   &host, &channel, &id, &lun) != 4)
-	    break;
-	if (fgets(buf, sizeof(buf), f) == NULL)
-	    break;
-	if (strncmp(buf, "  Vendor:", 9))
-	    break;
-	if (fgets(buf, sizeof(buf), f) == NULL)
-	    break;
-	if (strncmp(buf, "  Type:   ", 10))
-	    break;
-	if (!strncmp(buf+10, "Direct-Access", 13)) {
-	    if (disk >= sdlen) {
-		hd = (struct sdsk_disk *)
-		     realloc(hd, (hdlen+(disk&~3)+4)*sizeof(struct sdsk_disk));
-		sd = hd + hdlen;
-		memset (sd + sdlen, 0,
-			((disk&~3)+4-sdlen)*sizeof(struct sdsk_disk));
-		sdlen = (disk&~3)+4;
-	    }
-	    sd[disk].type = SDSK_TYPE_SD;
-	    sd[disk].host = host;
-	    sd[disk].hi = channel;
-	    sd[disk].mid = id;
-	    sd[disk].lo = lun;
-	    disk++;
-	}
-    }
-    fclose (f);
-
-    if (!(dir = opendir("/proc/scsi"))) {
-	if (!hdlen && hd) {
-	    free(hd);
-	    hd = NULL;
-	}
-	sd = NULL;
-	sdlen = 0;
-	return 1;
-    }
-
-    while ((ent = readdir(dir))) {
-	if (!strcmp (ent->d_name, "scsi") || ent->d_name[0] == '.')
-	    continue;
-	sprintf (path, "/proc/scsi/%s", ent->d_name);
-	if (stat (path, &st) < 0 || !S_ISDIR (st.st_mode))
-	    continue;
-	if (!(dirhba = opendir(path)))
-	    continue;
-
-	while ((enthba = readdir(dirhba))) {
-	    if (enthba->d_name[0] == '.')
-		continue;
-	    host = atoi(enthba->d_name);
-	    sprintf (path, "/proc/scsi/%s/%s", ent->d_name, enthba->d_name);
-	    f = fopen (path, "r");
-	    if (f == NULL) continue;
-
-	    if (!strcmp (ent->d_name, "esp") ||
-		!strcmp (ent->d_name, "qlogicpti") ||
-		!strcmp (ent->d_name, "fcal"))
-		p = "PROM node";
-	    else if (!strcmp (ent->d_name, "pluto"))
-		p = "serial ";
-	    else
-		p = "PCI bus";
-	    while (fgets (buf, sizeof(buf), f) != NULL) {
-		q = strstr (buf, p);
-		if (q == NULL) continue;
-		prom_node = 0;
-		switch (p[1]) {
-		case 'R':
-		    if (sscanf (q, "PROM node %x", &prom_node) == 1)
-			q = NULL;
-		    break;
-		case 'e':
-		    if (sscanf (q, "serial 000000%x %*dx%*d on soc%*d port %x PROM node %x",
-				&id, &lun, &prom_node) == 3 &&
-			lun >= 10 && lun <= 11) {
-			q = NULL;
-		    }
-		    break;
-		case 'C':
-		    if (sscanf (q, "PCI bus %x device %x", &pci_bus, &pci_devfn) == 2) {
-			q = NULL;
-			prom_node = prom_pci2node (pci_bus, pci_devfn);
-		    }
-		    break;
-		}
-		if (q == NULL) {
-		    for (disk = 0; disk < sdlen; disk++)
-			if (sd[disk].host == host && sd[disk].type) {
-			    sd[disk].prom_node = prom_node;
-			    if (p[1] == 'e') {
-				sd[disk].type = SDSK_TYPE_PLN;
-				sd[disk].lo = (lun << 28) | id;
-			    } else if (!strcmp (ent->d_name, "fcal"))
-				sd[disk].type = SDSK_TYPE_FC;
-			}
-		}
-	    }
-	    if (!strcmp (ent->d_name, "fcal")) {
-		while (fgets (buf, sizeof(buf), f) != NULL) {
-		    unsigned long long ll;
-		    if (sscanf (buf, " [AL-PA: %*x, Id: %d, Port WWN: %Lx, Node WWN: ", &id, &ll) == 2) {
-			for (disk = 0; disk < sdlen; disk++)
-			if (sd[disk].host == host && sd[disk].mid == id) {
-			    sd[disk].hi = ll >> 32;
-			    sd[disk].mid = ll;
-			}
-		    }
-		}
-	    }
-	    fclose(f);
-	}
-	closedir(dirhba);
-    }
-    closedir(dir);
-    return 0;
-}
-
-static int get_prom_ver(void)
-{
-    FILE *f = fopen ("/proc/cpuinfo","r");
-    int ver = 0;
-    char buffer[1024];
-    char *p;
-                    
-    if (f) {
-	while (fgets (buffer, 1024, f)) {
-	    if (!strncmp (buffer, "promlib", 7)) {
-		p = strstr (buffer, "Version ");
-		if (p) {
-		    p += 8;
-		    if (*p == '0' || (*p >= '2' && *p <= '3')) {
-			ver = *p - '0';
-		    }
-		}
-		break;
-	    }
-	}
-	fclose(f);
-    }
-    if (!ver) {
-	int len;
-        p = prom_getopt("sd-targets", &len);
-        if (p && len > 0 && len <= 8)
-	    strcpy(sd_targets, p);
-    }
-    return ver;
-}
-
-static void check_aliases(void) {
-    int nextnode, len;
-    char *prop;
-    hasaliases = 0;
-    for (nextnode = prom_getchild(prom_root_node); nextnode; nextnode = prom_getsibling(nextnode)) {
-	prop = prom_getproperty("name", &len);
-	if (prop && len > 0 && !strcmp (prop, "aliases"))
-	    hasaliases = 1;
-    }
-}
-
-char *prom_root_name = NULL;
-
-static void get_root_name(void) {
-    int len;
-    char *prop;
-    
-    prom_getsibling(0);
-    prop = prom_getproperty("name", &len);
-    if (prop && len > 0)
-	prom_root_name = strdup(prop);
-}
-
-int init_sbusdisk(void) {
-    if (prom_init(O_RDONLY))
-	return -1;
-    promvers = get_prom_ver();
-    check_aliases();
-    get_root_name();
-    scan_ide();
-    scan_scsi();
-    prom_walk_callback = scan_walk_callback;
-    prom_walk(prom_path, prom_root_node, prom_getchild (prom_root_node), 0);
-    close(promfd);
-    return 0;
-}
-
-void set_prom_vars(char *linuxAlias, char *bootDevice) {
-    int len;
-    int aliasDone = 0;
-    if (prom_init(O_RDWR))
-	return;
-    if (linuxAlias && hasaliases) {
-	char *use_nvramrc;
-	char nvramrc[2048];
-	char *p, *q, *r, *s;
-	int enabled = -1;
-	int count;
-
-	use_nvramrc = prom_getopt ("use-nvramrc?", &len);
-	if (len > 0) {
-	    if (!strcasecmp (use_nvramrc, "false"))
-		enabled = 0;
-	    else if (!strcasecmp (use_nvramrc, "true"))
-		enabled = 1;
-	}
-	if (enabled != -1) {
-	    p = prom_getopt ("nvramrc", &len);
-	    if (p) {
-		memcpy (nvramrc, p, len);
-		nvramrc [len] = 0;
-		q = nvramrc;
-		for (;;) {
-		    /* If there is already `devalias linux /some/ugly/prom/path'
-		       make sure we fully understand that and remove it. */
-		    if (!strncmp (q, "devalias", 8) && (q[8] == ' ' || q[8] == '\t')) {
-			for (r = q + 9; *r == ' ' || *r == '\t'; r++);
-			if (!strncmp (r, "linux", 5)) {
-			    for (s = r + 5; *s && *s != ' ' && *s != '\t'; s++);
-			    if (!*s) break;
-			    if (s == r + 5 ||
-				(r[5] == '#' && r[6] >= '0' && r[6] <= '9' &&
-				 (s == r + 7 ||
-				  (r[7] >= '0' && r[7] <= '9' && s == r + 8)))) {
-				for (r = s + 1; *r == ' ' || *r == '\t'; r++);
-				for (; *r && *r != ' ' && *r != '\t' && *r != '\n'; r++);
-				for (; *r == ' ' || *r == '\t'; r++);
-				if (*r == '\n') {
-				    r++;
-				    memmove (q, r, strlen(r) + 1);
-				    continue;
-				}
-			    }
-			}
-		    }
-		    q = strchr (q, '\n');
-		    if (!q) break;
-		    q++;
-		}
-		len = strlen (nvramrc);
-		if (len && nvramrc [len-1] != '\n')
-		    nvramrc [len++] = '\n';
-		p = nvramrc + len;
-		p = stpcpy (p, "devalias linux ");
-		r = linuxAlias;
-		q = strchr (r, ';');
-		count = 1;
-		while (q) {
-		    memcpy (p, r, q - r);
-		    p += q - r;
-		    sprintf (p, "\ndevalias linux#%d ", count++);
-		    p = strchr (p, 0);
-		    r = q + 1;
-		    q = strchr (r, ';');
-		}
-		p = stpcpy (p, r);
-		*p++ = '\n';
-		*p = 0;
-		prom_setopt ("nvramrc", nvramrc);
-		if (!enabled)
-		    prom_setopt ("use-nvramrc?", "true");
-		aliasDone = 1;
-	    }
-	}
-    }
-    if (bootDevice) {
-	char *p;
-	if (aliasDone)
-	    bootDevice = "linux";
-	p = prom_getopt ("boot-device", &len);
-	if (p) {
-	    prom_setopt ("boot-device", bootDevice);
-	    prom_setopt ("boot-file", "");
-	} else {
-	    p = prom_getopt ("boot-from", &len);
-	    if (p)
-		prom_setopt ("boot-from", bootDevice);
-	}
-    }
-    close(promfd);
-}
-
-#ifdef STANDALONE_SILO
-
-int main(void) {
-    int i;
-
-    init_sbusdisk();
-    set_prom_vars ("/sbus@1f,0/espdma/esp/sd@1,0:c;/sbus@1f,0/espdma/esp/sd@1,0:g;/sbus@1f,0/espdma/esp/sd@1,0:h", "linux");
-    printf ("prom root name `%s'\n", prom_root_name);
-    for (i = 0; i < hdlen; i++) {
-	if (hd[i].type)
-		printf ("hd%c %x %d %d %d\n", i + 'a', hd[i].prom_node,
-						    hd[i].hi, hd[i].mid, hd[i].lo);
-	if (hd[i].prom_name) printf ("%s\n", hd[i].prom_name);
-    }
-    for (i = 0; i < sdlen; i++) {
-	if (sd[i].type) {
-	    if (i < 26)
-		printf ("sd%c %x %d %d %d\n", i + 'a', sd[i].prom_node,
-						    sd[i].hi, sd[i].mid, sd[i].lo);
-	    else
-		printf ("sd%c%c %x %d %d %d\n", (i / 26) + 'a' - 1, (i % 26) + 'a', sd[i].prom_node,
-						    sd[i].hi, sd[i].mid, sd[i].lo);
-	}
-	if (sd[i].prom_name) printf ("%s\n", sd[i].prom_name);
-    }
-    exit(0);
-}
-
-#else
-
-void
-initSilo ()
-{
-    return init_sbusdisk();
-}
-
-char *
-disk2PromPath (unsigned char *disk)
-{
-    static unsigned char prompath[1024];
-    int diskno = -1, part;
-
-    if (disk[0] == 'h' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
-	diskno = disk[2] - 'a';
-	disk += 3;
-    } else if (disk[0] == 's' && disk[1] == 'd' && disk[2] >= 'a' && disk[2] <= 'z') {
-	if (disk[3] >= 'a' && disk[3] <= 'z') {
-	    diskno = (disk[2] - 'a' + 1) * 26 + (disk[3] - 'a');
-	    disk += 4;
-	} else {
-	    diskno = disk[2] - 'a';
-	    disk += 3;
-	}
-	if (diskno >= 128)
-	    diskno = -1;
-	else
-	    diskno += hdlen;
-    }
-    if (diskno == -1)
-	part = -1;
-    else if (!disk[0])
-	part = 3;
-    else {
-	part = atoi (disk);
-	if (part <= 0 || part > 8) part = -1;
-    }
-    if (diskno < 0 || part == -1 ||
-	diskno >= hdlen + sdlen || !hd[diskno].prom_name) {
-	return NULL;
-    }
-    if (!promvers)
-	sprintf (prompath, "%s%d)", hd[diskno].prom_name, part ? part - 1 : 2);
-    else {
-	if (part)
-	    sprintf (prompath, "%s:%c", hd[diskno].prom_name, part + 'a' - 1);
-	else
-	    strcpy (prompath, hd[diskno].prom_name);
-    }
-    return prompath;
-}
-
-int
-hasAliases (void)
-{
-    return hasaliases;
-}
-
-char *
-promRootName (void)
-{
-    return prom_root_name ? prom_root_name : "";
-}
-
-void
-setPromVars (char *linuxAlias, char *bootDevice)
-{
-    if (linuxAlias && !*linuxAlias) linuxAlias = NULL;
-    if (bootDevice && !*bootDevice) bootDevice = NULL;
-    set_prom_vars (linuxAlias, bootDevice);
-}
-
-#endif
-
-#else
-void initSilo() {}
-char *disk2PromPath(unsigned char *disk) { return 0; /* NULL */ }
-int hasAliases(void) { return 0; }
-char *promRootName(void) { return 0; /* NULL */ }
-void setPromVars(char *linuxAlias, char *bootDevice) {}
-#endif /* __sparc__ */
diff --git a/perl-install/c/smp-dmi.c b/perl-install/c/smp-dmi.c
deleted file mode 100644
index 241d8f464..000000000
--- a/perl-install/c/smp-dmi.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- *	CPU detetion based on DMI decode rev 1.2
- *
- *	(C) 2003 Nicolas Planel <nplanel@mandrakesoft.com>
- *      
- *	Licensed under the GNU Public license. If you want to use it in with
- *	another license just ask.
- */
-
-#include <stdio.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include <stdlib.h>
-
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned int u32;
-
-static void
-dump_raw_data(void *data, unsigned int length)
-{
-	unsigned char buffer1[80], buffer2[80], *b1, *b2, c;
-	unsigned char *p = data;
-	unsigned long column=0;
-	unsigned int length_printed = 0;
-	const unsigned char maxcolumn = 16;
-	while (length_printed < length) {
-		b1 = buffer1;
-		b2 = buffer2;
-		for (column = 0;
-		     column < maxcolumn && length_printed < length; 
-		     column ++) {
-			b1 += sprintf(b1, "%02x ",(unsigned int) *p);
-			if (*p < 32 || *p > 126) c = '.';
-			else c = *p;
-			b2 += sprintf(b2, "%c", c);
-			p++;
-			length_printed++;
-		}
-		/* pad out the line */
-		for (; column < maxcolumn; column++)
-		{
-			b1 += sprintf(b1, "   ");
-			b2 += sprintf(b2, " ");
-		}
-		
-		printf("%s\t%s\n", buffer1, buffer2);
-	}
-}
-
-
-
-struct dmi_header
-{
-	u8	type;
-	u8	length;
-	u16	handle;
-};
-
-static char *dmi_string(struct dmi_header *dm, u8 s)
-{
-	u8 *bp=(u8 *)dm;
-	if (!s) return "";
-	
-	bp+=dm->length;
-	while(s>1)
-	{
-		bp+=strlen(bp);
-		bp++;
-		s--;
-	}
-	return bp;
-}
-
-static char *dmi_processor_type(u8 code)
-{
-	static char *processor_type[]={
-		"",
-		"Other",
-		"Unknown",
-		"Central Processor",
-		"Math Processor",
-		"DSP Processor",
-		"Video Processor"
-	};
-	
-	if(code == 0xFF)
-		return "Other";
-	
-	if (code > 0xA1)
-		return "";
-	return processor_type[code];
-}
-
-static char *dmi_processor_family(u8 code)
-{
-	static char *processor_family[]={
-		"",
-		"Other",
-		"Unknown",
-		"8086",
-		"80286",
-		"Intel386 processor",
-		"Intel486 processor",
-		"8087",
-		"80287",
-		"80387",
-		"80487",
-		"Pentium processor Family",
-		"Pentium Pro processor",
-		"Pentium II processor",
-		"Pentium processor with MMX technology",
-		"Celeron processor",
-		"Pentium II Xeon processor",
-		"Pentium III processor",
-		"M1 Family",
-		"M1","M1","M1","M1","M1","M1", /* 13h - 18h */
-		"K5 Family",
-		"K5","K5","K5","K5","K5","K5", /* 1Ah - 1Fh */
-		"Power PC Family",
-		"Power PC 601",
-		"Power PC 603",
-		"Power PC 603+",
-		"Power PC 604",
-	};
-	
-	if(code == 0xFF)
-		return "Other";
-	
-	if (code > 0x24)
-		return "";
-	return processor_family[code];
-}
-
-typedef int (*dmi_decode)(u8 * data);
-
-static int decode_handle(int fd, u32 base, int len, int num, dmi_decode decode)
-{
-	u8 *buf = malloc(len);
-	struct dmi_header *dm;
-	u8 *data;
-	int i = 0;
-	int ret = 0;
-	
-	if (lseek(fd, (long)base, 0) == -1) {
-		perror("dmi: lseek");
-		return;
-	}
-	if (read(fd, buf, len)!=len) {
-		perror("dmi: read");
-		return;
-	}
-	data = buf;
-	while(i<num && data+sizeof(struct dmi_header)<=buf+len)
-	{
-		u8 *next;
-		struct dmi_header *dm = (struct dmi_header *)data;
-
-		/* look for the next handle */
-		next=data+dm->length;
-		while(next-buf+1<len && (next[0]!=0 || next[1]!=0))
-			next++;
-		next+=2;
-		if(next-buf<=len)
-			ret += decode(data);
-		else {
-			ret = 0; /* TRUNCATED */
-			break;
-		}
-		data=next;
-		i++;
-	}
-	free(buf);
-	return ret;
-}
-
-static int dmi_detect(dmi_decode decode) {
-  	unsigned char buf[20];
-	int fd = open("/dev/mem", O_RDONLY);
-	long fp = 0xE0000L;
-	int ret = 0;
-
-	if (fd == -1) {
-		perror("/dev/mem");
-		exit(1);
-	}
-	if (lseek(fd, fp, 0) == -1) {
-		perror("seek");
-		exit(1);
-	}
-	
-	while (fp < 0xFFFFF)
-	{
-		if (read(fd, buf, 16) != 16)
-			perror("read");
-		
-		if (memcmp(buf, "_DMI_", 5) == 0) {
-			u16 num = buf[13]<<8|buf[12];
-			u16 len = buf[7]<<8|buf[6];
-			u32 base = buf[11]<<24|buf[10]<<16|buf[9]<<8|buf[8];
-			
-			ret = decode_handle(fd, base, len, num, decode);
-			break;
-		}
-		fp += 16;
-	}
-	close(fd);
-	return ret;
-}
-
-static int processor(u8 *data) {
-	struct dmi_header *dm = (struct dmi_header *)data;
-
-	if((dm->type == 4) && /*"Central Processor"*/(data[5] == 3)) {
-		if(/*Processor Manufacturer*/data[7] != 0) 
-			return 1;
-	}
-	return 0;
-}
-
-static int memory_in_MB_type6(u8 *data)
-{
-	struct dmi_header *dm;
-	
-	int dmi_memory_module_size(u8 code) {
-		/* 3.3.7.2 */
-		switch(code&0x7F) {
-		case 0x7D: /* Not Determinable */
-		case 0x7E: /* Disabled */
-		case 0x7F: /* Not Installed */
-			break;
-		default:
-			return 1<<(code&0x7F);
-		}
-		return 0;
-	}
-
-	dm = (struct dmi_header *)data;
-		
-	if ((dm->type == 6) && (dm->length >= 0xC))
-		return dmi_memory_module_size(data[0x0A]); /* Enabled Size */
-	
-	return 0;
-}
-
-static int memory_in_MB_type17(u8 *data)
-{
-	struct dmi_header *dm;
-	
-	int form_factor_check(u8 code) {
-		/* 3.3.18.1 */
-		static const char form_factor[]={
-			0, /* "Other", */ /* 0x01 */
-			0, /* "Unknown", */
-			1, /* "SIMM", */
-			1, /* "SIP", */
-			0, /* "Chip", */
-			1, /* "DIP", */
-			0, /* "ZIP", */
-			0, /* "Proprietary Card", */
-			1, /* "DIMM", */
-			0, /* "TSOP", */
-			0, /* "Row Of Chips", */
-			1, /* "RIMM", */
-			1, /* "SODIMM", */
-			1, /* "SRIMM" *//* 0x0E */
-		};
-
-		if(code>=0x01 && code<=0x0E)
-			return form_factor[code-0x01];
-		return 0; /* out of spec */
-	}
-	int dmi_memory_device_size(u16 code) {
-		int mult = 1;
-
-		if (code == 0 || code == 0xFFFF)
-			return 0;
-		if (code & 0x8000) /* code is in KB */
-			mult = 1024;
-		return (code & 0x7FFF) * mult;
-	}
-
-	dm = (struct dmi_header *)data;
-		
-	if ((dm->type == 17) && (dm->length >= 0x15)) {
-		if (form_factor_check(data[0x0E]))
-			return dmi_memory_device_size((data[0x0D] << 8) + data[0x0C]);
-	}
-	
-	return 0;
-}
-
-int intelDetectSMP(void) {
-	return dmi_detect(processor) > 1;
-}
-
-int dmiDetectMemory(void) {
-	int s1 = dmi_detect(memory_in_MB_type6);
-	int s2 = dmi_detect(memory_in_MB_type17);
-	return s1 > s2 ? s1 : s2;
-}
diff --git a/perl-install/c/smp-test.c b/perl-install/c/smp-test.c
deleted file mode 100644
index f644449b8..000000000
--- a/perl-install/c/smp-test.c
+++ /dev/null
@@ -1,6 +0,0 @@
-main() {
-  if (detectSMP())
-    printf("has smp\n");
-  else
-    printf("no smp\n");
-}
diff --git a/perl-install/c/smp.c b/perl-install/c/smp.c
deleted file mode 100644
index 886321e06..000000000
--- a/perl-install/c/smp.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/*
-[_Anarchy_(alan@lightning.swansea.uk.linux.org)] you should do one check
-   though - if the board seems to be SMP and the CPU in /proc/cpuinfo is non
-   intel dont install an SMP kernel - thats a dual pentium board with a cyrix
-   or similar single cpu in it
-*/
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <string.h>
-#include <errno.h>
-
-#ifdef __alpha__
-int alphaDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-	char buff[1024];
-	
-	while (fgets (buff, 1024, f) != NULL) {
-	    if (!strncmp (buff, "cpus detected\t\t: ", 17)) {
-		if (strtoul (buff + 17, NULL, 0) > 1)
-		    issmp = 1;
-		break;
-	    }
-	}
-	fclose(f);
-    } else
-	return -1;
-    
-    return issmp;
-}
-#endif /* __alpha__ */
-
-#ifdef __sparc__
-int sparcDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-	char buff[1024];
-	
-	while (fgets (buff, 1024, f) != NULL) {
-	    if (!strncmp (buff, "ncpus probed\t: ", 15)) {
-		if (strtoul (buff + 15, NULL, 0) > 1)
-		    issmp = 1;
-		break;
-	    }
-	}
-	fclose(f);
-    } else
-	return -1;
-    
-    return issmp;
-}
-#endif /* __sparc__ */
-
-/* just a placeholder for now - don't have an SMP machine
-   need something in place to build - s.benedict */
-
-#ifdef __powerpc__
-int ppcDetectSMP(void)
-{
-    int issmp = 0;
-    FILE *f;
-    
-    f = fopen("/proc/cpuinfo", "r");
-    if (f) {     
-        char buff[1024];
-        
-        while (fgets (buff, 1024, f) != NULL) {
-            if (!strncmp (buff, "ncpus active\t: ", 15)) {
-                if (strtoul (buff + 15, NULL, 0) > 1)
-                    issmp = 1;
-                break;
-            }
-        }
-        fclose(f);
-    } else
-        return -1;
-    
-    return issmp;
-}
-#endif /* __powerpc__ */
-
-#if defined(__i386__) || defined(__x86_64__)
-/*
- * Copyright (c) 1996, by Steve Passe
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. The name of the developer may NOT be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      $Id$
- */
-
-/*
- * mptable.c
- */
-
-#define VMAJOR                  2
-#define VMINOR                  0
-#define VDELTA                  12
-
-/*
- * this will cause the raw mp table to be dumped to /tmp/mpdump
- *
-#define RAW_DUMP
- */
-
-#define MP_SIG                  0x5f504d5f      /* _MP_ */
-#define EXTENDED_PROCESSING_READY
-#define OEM_PROCESSING_READY_NOT
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <sys/types.h>
-
-#define LINUX 1
-#if LINUX
-typedef unsigned int vm_offset_t;
-#else
-#include <machine/types.h>
-#endif
-
-typedef unsigned char	u8;
-typedef unsigned short	u16;
-typedef unsigned int	u32;
-typedef vm_offset_t		addr_t;
-
-/* EBDA is @ 40:0e in real-mode terms */
-#define EBDA_POINTER            0x040e          /* location of EBDA pointer */
-
-/* CMOS 'top of mem' is @ 40:13 in real-mode terms */
-#define TOPOFMEM_POINTER        0x0413          /* BIOS: base memory size */
-
-#define DEFAULT_TOPOFMEM        0xa0000
-
-#define BIOS_BASE               0xf0000
-#define BIOS_BASE2              0xe0000
-#define BIOS_SIZE               0x10000
-#define ONE_KBYTE               1024
-
-#define GROPE_AREA1             0x80000
-#define GROPE_AREA2             0x90000
-#define GROPE_SIZE              0x10000
-
-/* MP Floating Pointer Structure */
-typedef struct MPFPS {
-    char        signature[ 4 ];
-    addr_t      pap;
-    u8          length;
-    u8          spec_rev;
-    u8          checksum;
-    u8          mpfb1;
-    u8          mpfb2;
-    u8          mpfb3;
-    u8          mpfb4;
-    u8          mpfb5;
-} mpfps_t;
-
-/* MP Configuration Table Header */
-typedef struct MPCTH {
-    char        signature[ 4 ];
-    u16         base_table_length;
-    u8          spec_rev;
-    u8          checksum;
-    u8          oem_id[ 8 ];
-    u8          product_id[ 12 ];
-    addr_t      oem_table_pointer;
-    u16         oem_table_size;
-    u16         entry_count;
-    addr_t      apic_address;
-    u16         extended_table_length;
-    u8          extended_table_checksum;
-    u8          reserved;
-} mpcth_t;
-
-typedef struct PROCENTRY {
-    u8          type;
-    u8          apicID;
-    u8          apicVersion;
-    u8          cpuFlags;
-    u32         cpuSignature;
-    u32         featureFlags;
-    u32         reserved1;
-    u32         reserved2;
-} ProcEntry;
-
-#define PROCENTRY_FLAG_EN       0x01
-
-static void seekEntry( vm_offset_t addr );
-static void apic_probe( vm_offset_t* paddr, int* where );
-static void readEntry( void* entry, int size );
-
-/* global data */
-static int     pfd;            /* physical /dev/mem fd */
-static int     verbose = 0;
-static int     grope = 0;
-
-static int
-readType()
-{
-    u_char      type;
-
-    if ( read( pfd, &type, sizeof( u_char ) ) != sizeof( u_char ) ) {
-        perror( "type read" );
-        fprintf( stderr, "\npfd: %d", pfd );
-        fflush( stderr );
-        exit( 1 );
-    }
-
-    if ( lseek( pfd, -1, SEEK_CUR ) < 0 ) {
-        perror( "type seek" );
-        exit( 1 );
-    }
-
-    return (int)type;
-}
-
-extern int intelDetectSMP(void);
-
-// old detection
-static int intelDetectSMP_mptable(void)
-{
-    vm_offset_t paddr;
-    int         where;
-    mpfps_t     mpfps;
-    int		rc = 0;
-    int		ncpus = 0;
-    
-    /* open physical memory for access to MP structures */
-    if ( (pfd = open( "/dev/mem", O_RDONLY )) < 0 ) {
-	return 0;
-    }
-
-    /* probe for MP structures */
-    apic_probe( &paddr, &where );
-    if ( where <= 0 )
-	return 0;
-
-    seekEntry( paddr );
-    readEntry( &mpfps, sizeof( mpfps_t ) );
-
-    if (mpfps.mpfb1)
-	/* old style */
-	rc = 1;
-    else {
-	/* go to the config table */
-	mpcth_t     cth;
-	int count, i;
-	    
-	paddr = mpfps.pap;
-	seekEntry( paddr );
-	readEntry( &cth, sizeof( cth ) );
-	/* if we don't have any entries, the kernel sure
-	   won't be able to set up mp.  Needs at least one entry
-	   for smp kernel */
-	if (cth.entry_count <= 1) {
-	    close (pfd);
-	    return 0;
-	}
-	count = cth.entry_count;
-	for (i = 0; i < count; i++) {
-	    if ( readType() == 0 ) {
-		ProcEntry   entry;
-		readEntry( &entry, sizeof( entry ) );
-		if (entry.cpuFlags & PROCENTRY_FLAG_EN)
-		    ncpus++;
-	    }
-	}
-	if (ncpus > 1)
-	    rc = 1;
-    }
-
-    close (pfd);
-    return rc;
-}
-
-/*
- * set PHYSICAL address of MP floating pointer structure
- */
-#define NEXT(X)         ((X) += 4)
-static void
-apic_probe( vm_offset_t* paddr, int* where )
-{
-    /*
-     * c rewrite of apic_probe() by Jack F. Vogel
-     */
-
-    int         x;
-    u_short     segment;
-    vm_offset_t target;
-    u_int       buffer[ BIOS_SIZE / sizeof( int ) ];
-
-    if ( verbose )
-        printf( "\n" );
-
-    /* search Extended Bios Data Area, if present */
-    if ( verbose )
-        printf( " looking for EBDA pointer @ 0x%04x, ", EBDA_POINTER );
-    seekEntry( (vm_offset_t)EBDA_POINTER );
-    readEntry( &segment, 2 );
-    if ( segment ) {                /* search EBDA */
-        target = (vm_offset_t)segment << 4;
-        if ( verbose )
-            printf( "found, searching EBDA @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, ONE_KBYTE );
-
-        for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 1;
-                *paddr = (x * sizeof( unsigned int )) + target;
-                return;
-            }
-        }
-    }
-    else {
-        if ( verbose )
-            printf( "NOT found\n" );
-    }
-
-    /* read CMOS for real top of mem */
-    seekEntry( (vm_offset_t)TOPOFMEM_POINTER );
-    readEntry( &segment, 2 );
-    --segment;                                          /* less ONE_KBYTE */
-    target = segment * 1024;
-    if ( verbose )
-        printf( " searching CMOS 'top of mem' @ 0x%08x (%dK)\n",
-                target, segment );
-    seekEntry( target );
-    readEntry( buffer, ONE_KBYTE );
-
-    for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 2;
-            *paddr = (x * sizeof( unsigned int )) + target;
-            return;
-        }
-    }
-
-    /* we don't necessarily believe CMOS, check base of the last 1K of 640K */
-    if ( target != (DEFAULT_TOPOFMEM - 1024)) {
-        target = (DEFAULT_TOPOFMEM - 1024);
-        if ( verbose )
-            printf( " searching default 'top of mem' @ 0x%08x (%dK)\n",
-                    target, (target / 1024) );
-        seekEntry( target );
-        readEntry( buffer, ONE_KBYTE );
-
-        for ( x = 0; x < ONE_KBYTE / sizeof ( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 3;
-                *paddr = (x * sizeof( unsigned int )) + target;
-                return;
-            }
-        }
-    }
-
-    /* search the BIOS */
-    if ( verbose )
-        printf( " searching BIOS @ 0x%08x\n", BIOS_BASE );
-    seekEntry( BIOS_BASE );
-    readEntry( buffer, BIOS_SIZE );
-
-    for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 4;
-            *paddr = (x * sizeof( unsigned int )) + BIOS_BASE;
-            return;
-        }
-    }
-
-    /* search the extended BIOS */
-    if ( verbose )
-        printf( " searching extended BIOS @ 0x%08x\n", BIOS_BASE2 );
-    seekEntry( BIOS_BASE2 );
-    readEntry( buffer, BIOS_SIZE );
-
-    for ( x = 0; x < BIOS_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-        if ( buffer[ x ] == MP_SIG ) {
-            *where = 5;
-            *paddr = (x * sizeof( unsigned int )) + BIOS_BASE2;
-            return;
-        }
-    }
-
-    if ( grope ) {
-        /* search additional memory */
-        target = GROPE_AREA1;
-        if ( verbose )
-            printf( " groping memory @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, GROPE_SIZE );
-
-        for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 6;
-                *paddr = (x * sizeof( unsigned int )) + GROPE_AREA1;
-                return;
-            }
-        }
-
-        target = GROPE_AREA2;
-        if ( verbose )
-            printf( " groping memory @ 0x%08x\n", target );
-        seekEntry( target );
-        readEntry( buffer, GROPE_SIZE );
-
-        for ( x = 0; x < GROPE_SIZE / sizeof( unsigned int ); NEXT(x) ) {
-            if ( buffer[ x ] == MP_SIG ) {
-                *where = 7;
-                *paddr = (x * sizeof( unsigned int )) + GROPE_AREA2;
-                return;
-            }
-        }
-    }
-
-    *where = 0;
-    *paddr = (vm_offset_t)0;
-}
-
-
-/*
- *
- */
-static void
-seekEntry( vm_offset_t addr )
-{
-    if ( lseek( pfd, (off_t)addr, SEEK_SET ) < 0 ) {
-        return;
-        perror( "/dev/mem seek" );
-        exit( 1 );
-    }
-}
-
-
-/*
- *
- */
-static void
-readEntry( void* entry, int size )
-{
-    if ( read( pfd, entry, size ) != size ) {
-        return;
-        perror( "readEntry" );
-        exit( 1 );
-    }
-}
-
-
-#endif /* __i386__ */
-
-int detectSMP(void)
-{
-    static int isSMP = -1;
-
-    if (isSMP != -1)
-	return isSMP;
-
-#ifdef __i386__
-    return isSMP = intelDetectSMP() || intelDetectSMP_mptable();
-#elif __sparc__
-    return isSMP = sparcDetectSMP();
-#elif __alpha__
-    return isSMP = alphaDetectSMP();
-#elif __powerpc__
-    return isSMP = ppcDetectSMP();
-#elif __ia64__
-	/* TODO: Update to check against /proc/pal/cpuX */
-    return isSMP = 1;
-#elif __x86_64__
-	return isSMP = intelDetectSMP() || intelDetectSMP_mptable();
-#else
-    #error unknown architecture
-#endif
-}
-
-#if TEST
-int main() {
-  if (detectSMP())
-    printf("has smp\n");
-  else
-    printf("no smp\n");
-}
-#endif
diff --git a/perl-install/c/smp.h b/perl-install/c/smp.h
deleted file mode 100644
index 3255cc489..000000000
--- a/perl-install/c/smp.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef SMP_H
-#define SMP_H
-
-int detectSMP(void);
-
-#endif /* SMP_H */
diff --git a/perl-install/c/stuff.pm b/perl-install/c/stuff.pm
deleted file mode 100644
index 405f896cd..000000000
--- a/perl-install/c/stuff.pm
+++ /dev/null
@@ -1,17 +0,0 @@
-package c::stuff; # $Id$
-
-use strict;
-use vars qw($VERSION @ISA);
-
-require DynaLoader;
-
-@ISA = qw(DynaLoader);
-$VERSION = '0.01';
-# perl_checker: EXPORT-ALL
-
-c::stuff->bootstrap($VERSION);
-
-sub from_utf8 { iconv($_[0], "utf-8", standard_charset()) }
-sub to_utf8 { iconv($_[0], standard_charset(), "utf-8") }
-
-1;
diff --git a/perl-install/c/stuff.xs.pl b/perl-install/c/stuff.xs.pl
deleted file mode 100644
index a162dfe6e..000000000
--- a/perl-install/c/stuff.xs.pl
+++ /dev/null
@@ -1,817 +0,0 @@
-use Config;
-
-print '
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-
-/* workaround for glibc and kernel header files not in sync */
-#define dev_t dev_t
-
-#include <ctype.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <syslog.h>
-#include <fcntl.h>
-#include <resolv.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <sys/ioctl.h>
-#include <sys/time.h>
-#include <sys/resource.h>
-#include <sys/stat.h>
-#include <sys/utsname.h>
-#include <sys/mount.h>
-#undef __USE_MISC
-#include <linux/wireless.h>
-#include <linux/keyboard.h>
-#include <linux/kd.h>
-#include <linux/hdreg.h>
-#include <linux/vt.h>
-#include <linux/fd.h>
-#include <linux/cdrom.h>
-#include <linux/loop.h>
-#include <linux/blkpg.h>
-#include <linux/iso_fs.h>
-#include <net/if.h>
-#include <net/route.h>
-#include <netinet/in.h>
-#include <linux/sockios.h>
-
-// for ethtool structs:
-typedef unsigned long long u64;
-typedef __uint32_t u32;
-typedef __uint16_t u16;
-typedef __uint8_t u8;
-
-#include <linux/ethtool.h>
-
-/* for is_ext3 */
-#include <ext2fs/ext2_fs.h>
-#include <ext2fs/ext2fs.h>
-
-// for UPS on USB:
-# define HID_MAX_USAGES 1024
-#include <linux/hiddev.h>
-
-#include <libldetect.h>
-
-#include <langinfo.h>
-#include <string.h>
-#include <iconv.h>
-
-#include <libintl.h>
-
-#define SECTORSIZE 512
-
-char *prom_getopt();
-void prom_setopt();
-char *prom_getproperty();
-char *disk2PromPath();
-char *promRootName();
-
-';
-
-$Config{archname} =~ /i.86/ and print '
-char *pcmcia_probe(void);
-';
-
-print '
-#undef Fflush
-#undef Mkdir
-#undef Stat
-#include <rpm/rpmlib.h>
-#include <rpm/rpmio.h>
-
-void rpmError_callback_empty(void) {}
-
-int rpmError_callback_data;
-void rpmError_callback(void) {
-  if (rpmErrorCode() != RPMERR_UNLINK && rpmErrorCode() != RPMERR_RMDIR) {
-    write(rpmError_callback_data, rpmErrorString(), strlen(rpmErrorString()));
-  }
-}
-
-';
-
-print '
-
-void log_message(const char * s, ...) {
-   va_list args;
-   va_list args_copy;
-   FILE * logtty = fopen("/dev/tty3", "w");
-   if (!logtty)
-      return;
-   fprintf(logtty, "* ");
-   va_start(args, s);
-   vfprintf(logtty, s, args);
-   fprintf(logtty, "\n");
-   fclose(logtty);
-   va_end(args);
-
-   logtty = fopen("/tmp/ddebug.log", "a");
-   if (!logtty)
-      return;
-   fprintf(logtty, "* ");
-   va_copy(args_copy, args);
-   va_start(args_copy, s);
-   vfprintf(logtty, s, args_copy);
-   fprintf(logtty, "\n");
-   fclose(logtty);
-   va_end(args_copy);
-}
-
-';
-
-print '
-
-SV * iconv_(char* s, char* from_charset, char* to_charset) {
-  iconv_t cd = iconv_open(to_charset, from_charset);
-  char* retval = s;
-  if (cd != (iconv_t) (-1)) {
-      size_t s_len = strlen(retval);
-      /* the maximum expansion when converting happens when converting
-	 tscii to utf-8; each tscii char can become up to 4 unicode chars
-	 and each one of those unicode chars can be 3 bytes long */
-      char *buf = alloca(4 * 3 * s_len);
-      {
-	  char *ptr = buf;
-	  size_t ptr_len = 4 * 3 * s_len;
-	  if ((iconv(cd, &s, &s_len, &ptr, &ptr_len)) != (size_t) (-1)) {
-	      *ptr = 0;
-	      retval = buf;
-	  }
-      }
-      iconv_close(cd);
-  }
-  return newSVpv(retval, 0);
-}
-
-int length_of_space_padded(char *str, int len) {
-  while (len >= 0 && str[len-1] == \' \')
-    --len;
-  return len;
-}
-
-MODULE = c::stuff		PACKAGE = c::stuff
-
-';
-
-$Config{archname} =~ /i.86/ and print '
-char *
-pcmcia_probe()
-';
-
-print '
-char *
-dgettext(domainname, msgid)
-   char * domainname
-   char * msgid
-
-int
-del_partition(hd, part_number)
-  int hd
-  int part_number
-  CODE:
-  {
-    struct blkpg_partition p = { 0, 0, part_number, "", "" };
-    struct blkpg_ioctl_arg s = { BLKPG_DEL_PARTITION, 0, sizeof(struct blkpg_partition), (void *) &p };
-    RETVAL = ioctl(hd, BLKPG, &s) == 0;
-  }
-  OUTPUT:
-  RETVAL
-
-int
-add_partition(hd, part_number, start_sector, size_sector)
-  int hd
-  int part_number
-  unsigned long start_sector
-  unsigned long size_sector
-  CODE:
-  {
-    long long start = (long long) start_sector * 512;
-    long long size = (long long) size_sector * 512;
-    struct blkpg_partition p = { start, size, part_number, "", "" };
-    struct blkpg_ioctl_arg s = { BLKPG_ADD_PARTITION, 0, sizeof(struct blkpg_partition), (void *) &p };
-    RETVAL = ioctl(hd, BLKPG, &s) == 0;
-  }
-  OUTPUT:
-  RETVAL
-
-int
-is_secure_file(filename)
-  char * filename
-  CODE:
-  {
-    int fd;
-    unlink(filename); /* in case it exists and we manage to remove it */
-    RETVAL = (fd = open(filename, O_RDWR | O_CREAT | O_EXCL, 0600)) != -1;
-    if (RETVAL) close(fd);
-  }
-  OUTPUT:
-  RETVAL
-
-int
-is_ext3(device_name)
-  char * device_name
-  CODE:
-  {
-    ext2_filsys fs;
-    int retval = ext2fs_open (device_name, 0, 0, 0, unix_io_manager, &fs);
-    if (retval) {
-      RETVAL = 0;
-    } else {
-      RETVAL = fs->super->s_feature_compat & EXT3_FEATURE_COMPAT_HAS_JOURNAL;
-      ext2fs_close(fs);  
-    }
-  }
-  OUTPUT:
-  RETVAL
-
-char *
-get_ext2_label(device_name)
-  char * device_name
-  CODE:
-  {
-    ext2_filsys fs;
-    int retval = ext2fs_open (device_name, 0, 0, 0, unix_io_manager, &fs);
-    if (retval) {
-      RETVAL = 0;
-    } else {
-      RETVAL = fs->super->s_volume_name;
-      ext2fs_close(fs);  
-    }
-  }
-  OUTPUT:
-  RETVAL
-
-void
-setlocale()
-   CODE:
-   setlocale(LC_ALL, "");
-   setlocale(LC_NUMERIC, "C"); /* otherwise eval "1.5" returns 1 in fr_FR for example */
-
-char *
-bindtextdomain(domainname, dirname)
-   char * domainname
-   char * dirname
-
-char *
-bind_textdomain_codeset(domainname, codeset)
-   char * domainname
-   char * codeset
-
-int
-lseek_sector(fd, sector, offset)
-  int fd
-  long sector
-  long offset
-  CODE:
-  RETVAL = lseek64(fd, (off64_t) sector * SECTORSIZE + offset, SEEK_SET) >= 0;
-  OUTPUT:
-  RETVAL
-
-int
-isBurner(fd)
-  int fd
-  CODE:
-  RETVAL = ioctl(fd, CDROM_GET_CAPABILITY) & CDC_CD_RW;
-  OUTPUT:
-  RETVAL
-
-int
-isDvdDrive(fd)
-  int fd
-  CODE:
-  RETVAL = ioctl(fd, CDROM_GET_CAPABILITY) & CDC_DVD;
-  OUTPUT:
-  RETVAL
-
-char *
-floppy_info(name)
-  char * name
-  CODE:
-  int fd = open(name, O_RDONLY | O_NONBLOCK);
-  RETVAL = NULL;
-  if (fd != -1) {
-     char drivtyp[17];
-     if (ioctl(fd, FDGETDRVTYP, (void *)drivtyp) == 0) {
-       struct floppy_drive_struct ds;
-       if (ioctl(fd, FDPOLLDRVSTAT, &ds) == 0 && ds.track >= 0)
-         RETVAL = drivtyp;
-     }
-     close(fd);
-  }
-  OUTPUT:
-  RETVAL
-
-unsigned int
-total_sectors(fd)
-  int fd
-  CODE:
-  {
-    long s;
-    RETVAL = ioctl(fd, BLKGETSIZE, &s) == 0 ? s : 0;
-  }
-  OUTPUT:
-  RETVAL
-
-void
-unlimit_core()
-  CODE:
-  {
-    struct rlimit rlim = { RLIM_INFINITY, RLIM_INFINITY };
-    setrlimit(RLIMIT_CORE, &rlim);
-  }
-
-int
-getlimit_core()
-  CODE:
-  {
-    struct rlimit rlim;
-    getrlimit(RLIMIT_CORE, &rlim);
-    RETVAL = rlim.rlim_cur;
-  }
-  OUTPUT:
-  RETVAL
-
-void
-openlog(ident)
-  char *ident
-  CODE:
-  openlog(ident, 0, 0);
-
-void
-closelog()
-
-void
-syslog(priority, mesg)
-  int priority
-  char *mesg
-  CODE:
-  syslog(priority, mesg);
-
-void
-setsid()
-
-void
-_exit(status)
-  int status
-
-void
-usleep(microseconds)
-  unsigned long microseconds
-
-int
-detectSMP()
-
-int
-dmiDetectMemory()
-
-void
-pci_probe()
-  PPCODE:
-    //proc_pci_path = "/tmp/pci";
-    struct pciusb_entries entries = pci_probe();
-    char buf[2048];
-    int i;
-
-    EXTEND(SP, entries.nb);
-    for (i = 0; i < entries.nb; i++) {
-      struct pciusb_entry *e = &entries.entries[i];
-      snprintf(buf, sizeof(buf), "%04x\t%04x\t%04x\t%04x\t%d\t%d\t%d\t%s\t%s\t%s", 
-               e->vendor, e->device, e->subvendor, e->subdevice, e->pci_bus, e->pci_device, e->pci_function,
-               pci_class2text(e->class_), e->module ? e->module : "unknown", e->text);
-      PUSHs(sv_2mortal(newSVpv(buf, 0)));
-    }
-    pciusb_free(&entries);
-
-void
-usb_probe()
-  PPCODE:
-    struct pciusb_entries entries = usb_probe();
-    char buf[2048];
-    int i;
-
-    EXTEND(SP, entries.nb);
-    for (i = 0; i < entries.nb; i++) {
-      struct pciusb_entry *e = &entries.entries[i];
-      struct usb_class_text class_text = usb_class2text(e->class_);
-      snprintf(buf, sizeof(buf), "%04x\t%04x\t%s|%s|%s\t%s\t%s\t%d\t%d", 
-               e->vendor, e->device, class_text.usb_class_text, class_text.usb_sub_text, class_text.usb_prot_text, e->module ? e->module : "unknown", e->text, e->pci_bus, e->pci_device);
-      PUSHs(sv_2mortal(newSVpv(buf, 0)));
-    }
-    pciusb_free(&entries);
-
-void
-dmi_probe()
-  PPCODE:
-    //dmidecode_file = "/usr/share/ldetect-lst/dmidecode.Laptop.Dell-Latitude-C810";
-    //dmidecode_file = "../../soft/ldetect-lst/test/dmidecode.Laptop.Sony-Vaio-GRX316MP";
-
-    struct dmi_entries entries = dmi_probe();
-    char buf[2048];
-    int i;
-
-    EXTEND(SP, entries.nb);
-    for (i = 0; i < entries.nb; i++) {
-      snprintf(buf, sizeof(buf), "%s\t%s", 
-               entries.entries[i].module, entries.entries[i].constraints);
-      PUSHs(sv_2mortal(newSVpv(buf, 0)));
-    }
-    dmi_entries_free(entries);
-
-
-unsigned int
-getpagesize()
-
-
-char*
-get_usb_ups_name(int fd)
-  CODE:
-        /* from nut/drivers/hidups.c::upsdrv_initups() : */
-        char name[256];
-        ioctl(fd, HIDIOCGNAME(sizeof(name)), name);
-        RETVAL=name;
-        ioctl(fd, HIDIOCINITREPORT, 0);
-  OUTPUT:
-  RETVAL
-
-
-
-int
-hasNetDevice(device)
-  char * device
-  CODE:
-    struct ifreq req;
-    int s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s == -1) { RETVAL = 0; return; }
-
-    strncpy(req.ifr_name, device, IFNAMSIZ);
-
-    RETVAL = ioctl(s, SIOCGIFFLAGS, &req) == 0;
-    close(s);
-  OUTPUT:
-  RETVAL
-
-
-int
-isNetDeviceWirelessAware(device)
-  char * device
-  CODE:
-    struct iwreq ifr;
-
-    int s = socket(AF_INET, SOCK_DGRAM, 0);
-
-    memset(&ifr, 0, sizeof(ifr));
-    strncpy(ifr.ifr_name, device, IFNAMSIZ);
-    RETVAL = ioctl(s, SIOCGIWNAME, &ifr) != -1;
-    close(s);
-  OUTPUT:
-  RETVAL
-
-
-int enable_net_device(device)
-  char * device
-  CODE:
-    struct ifreq ifr;
-    int err;
-    int s = socket(AF_INET, SOCK_DGRAM, 0);
-
-    strncpy(ifr.ifr_name, device, IFNAMSIZ);
-    err = ioctl(s, SIOCGIFFLAGS, &ifr);
-    if (!err && !(ifr.ifr_flags & IFF_UP)) {
-        ifr.ifr_flags |= IFF_UP;
-        err = ioctl(s, SIOCSIFFLAGS, &ifr);
-    }
-    if (err)
-        perror("SIOCSIFFLAGS");
-    RETVAL = err;
-  OUTPUT:
-    RETVAL
-
-void
-get_netdevices()
-  PPCODE:
-     struct ifconf ifc;
-     struct ifreq *ifr;
-     int i;
-     int numreqs = 10;
-
-     int s = socket(AF_INET, SOCK_DGRAM, 0);
-
-     ifc.ifc_buf = NULL;
-     for (;;) {
-          ifc.ifc_len = sizeof(struct ifreq) * numreqs;
-          ifc.ifc_buf = realloc(ifc.ifc_buf, ifc.ifc_len);
-
-          if (ioctl(s, SIOCGIFCONF, &ifc) < 0) {
-               perror("SIOCGIFCONF");
-               return;
-          }
-          if (ifc.ifc_len == sizeof(struct ifreq) * numreqs) {
-               /* assume it overflowed and try again */
-               numreqs += 10;                                                                         
-               continue;                                                                              
-          }
-          break;
-     }
-     if (ifc.ifc_len) {
-          ifr = ifc.ifc_req;
-          EXTEND(sp, ifc.ifc_len);
-          for (i=0; i < ifc.ifc_len; i+= sizeof(struct ifreq)) {
-               PUSHs(sv_2mortal(newSVpv(ifr->ifr_name, 0)));
-               ifr++;
-          }
-     }
-
-     close(s);
-
-
-char*
-getNetDriver(char* device)
-  ALIAS:
-    getHwIDs = 1
-  CODE:
-    struct ifreq ifr;
-    struct ethtool_drvinfo drvinfo;
-    int s = socket(AF_INET, SOCK_DGRAM, 0);
-
-    memset(&ifr, 0, sizeof(ifr));
-    strncpy(ifr.ifr_name, device, IFNAMSIZ);
-
-    drvinfo.cmd = ETHTOOL_GDRVINFO;
-    ifr.ifr_data = (caddr_t) &drvinfo;
-
-    if (ioctl(s, SIOCETHTOOL, &ifr) != -1) {
-        switch (ix) {
-            case 0:
-                RETVAL = strdup(drvinfo.driver);
-                break;
-            case 1:
-                RETVAL = strdup(drvinfo.bus_info);
-                break;
-        }
-    } else { perror("SIOCETHTOOL"); RETVAL = strdup(""); }
-  OUTPUT:
-  RETVAL
-
-
-int
-addDefaultRoute(gateway)
-  char *gateway
-  CODE:
-    struct rtentry route;
-    struct sockaddr_in addr;
-    int s = socket(AF_INET, SOCK_DGRAM, 0);
-    if (s == -1) { RETVAL = 0; return; }
-
-    memset(&route, 0, sizeof(route));
-
-    addr.sin_family = AF_INET;
-    addr.sin_port = 0;
-    inet_aton(gateway, &addr.sin_addr);
-    memcpy(&route.rt_gateway, &addr, sizeof(addr));
-
-    addr.sin_addr.s_addr = INADDR_ANY;
-    memcpy(&route.rt_dst, &addr, sizeof(addr));
-    memcpy(&route.rt_genmask, &addr, sizeof(addr));
-
-    route.rt_flags = RTF_UP | RTF_GATEWAY;
-    route.rt_metric = 0;
-
-    RETVAL = !ioctl(s, SIOCADDRT, &route);
-  OUTPUT:
-  RETVAL
-
-
-char*
-get_hw_address(const char* ifname)
-  CODE:
-    int s;
-    struct ifreq ifr;
-    unsigned char *a;
-    char *res;
-    s = socket(AF_INET, SOCK_DGRAM, IPPROTO_IP);
-    if (s < 0) {
-        perror("socket");
-        RETVAL = NULL;
-        return;
-    }
-    strncpy((char*) &ifr.ifr_name, ifname, IFNAMSIZ);
-    if (ioctl(s, SIOCGIFHWADDR, &ifr) < 0) {
-        perror("ioctl(SIOCGIFHWADDR)");
-        RETVAL = NULL;
-        return;
-    }
-    a = ifr.ifr_hwaddr.sa_data;
-    asprintf(&res, "%02x:%02x:%02x:%02x:%02x:%02x", a[0],a[1],a[2],a[3],a[4],a[5]);
-    RETVAL= res;
-  OUTPUT:
-  RETVAL
-
-
-
-char *
-kernel_version()
-  CODE:
-  struct utsname u;
-  if (uname(&u) == 0) RETVAL = u.release; else RETVAL = NULL;
-  OUTPUT:
-  RETVAL
-
-int
-prom_open()
-
-void
-prom_close()
-
-int
-prom_getsibling(node)
-  int node
-
-int
-prom_getchild(node)
-  int node
-
-void
-prom_getopt(key)
-  char *key
-  PPCODE:
-  int lenp = 0;
-  char *value = NULL;
-  value = prom_getopt(key, &lenp);
-  EXTEND(sp, 1);
-  if (value != NULL) {
-    PUSHs(sv_2mortal(newSVpv(value, 0)));
-  } else {
-    PUSHs(&PL_sv_undef);
-  }
-
-void
-prom_setopt(key, value)
-  char *key
-  char *value
-
-void
-prom_getproperty(key)
-  char *key
-  PPCODE:
-  int lenp = 0;
-  char *value = NULL;
-  value = prom_getproperty(key, &lenp);
-  EXTEND(sp, 1);
-  if (value != NULL) {
-    PUSHs(sv_2mortal(newSVpv(value, lenp)));
-  } else {
-    PUSHs(&PL_sv_undef);
-  }
-
-void
-prom_getstring(key)
-  char *key
-  PPCODE:
-  int lenp = 0;
-  char *value = NULL;
-  value = prom_getproperty(key, &lenp);
-  EXTEND(sp, 1);
-  if (value != NULL) {
-    PUSHs(sv_2mortal(newSVpv(value, 0)));
-  } else {
-    PUSHs(&PL_sv_undef);
-  }
-
-int
-prom_getbool(key)
-  char *key
-
-void
-initSilo()
-
-char *
-disk2PromPath(disk)
-  unsigned char *disk
-
-int
-hasAliases()
-
-char *
-promRootName()
-
-void
-setPromVars(linuxAlias, bootDevice)
-  char *linuxAlias
-  char *bootDevice
-
-SV *
-iconv(s, from_charset, to_charset)
-  char *s
-  char *from_charset
-  char *to_charset
-  CODE:
-  RETVAL = iconv_(s, from_charset, to_charset);
-  OUTPUT:
-  RETVAL
-
-int
-is_tagged_utf8(s)
-   SV *s
-   CODE:
-   RETVAL = SvUTF8(s);
-   OUTPUT:
-   RETVAL
-
-void
-set_tagged_utf8(s)
-   SV *s
-   CODE:
-   SvUTF8_on(s);
-
-void
-upgrade_utf8(s)
-   SV *s
-   CODE:
-   sv_utf8_upgrade(s);
-
-void
-unset_tagged_utf8(s)
-   SV *s
-   CODE:
-   SvUTF8_off(s);
-
-char *
-standard_charset()
-  CODE:
-  RETVAL = nl_langinfo(CODESET);
-  OUTPUT:
-  RETVAL
-
-void
-get_iso_volume_ids(int fd)
-  INIT:
-  struct iso_primary_descriptor voldesc;
-  PPCODE:
-  lseek(fd, 16 * ISOFS_BLOCK_SIZE, SEEK_SET);
-  if (read(fd, &voldesc, sizeof(struct iso_primary_descriptor)) == sizeof(struct iso_primary_descriptor)) {
-    if (voldesc.type[0] == ISO_VD_PRIMARY && !strncmp(voldesc.id, ISO_STANDARD_ID, sizeof(voldesc.id))) {
-      XPUSHs(sv_2mortal(newSVpv(voldesc.volume_id, length_of_space_padded(voldesc.volume_id, sizeof(voldesc.volume_id)))));
-      XPUSHs(sv_2mortal(newSVpv(voldesc.application_id, length_of_space_padded(voldesc.application_id, sizeof(voldesc.application_id)))));
-    }
-  }
-
-';
-
-print '
-const char *
-rpmErrorString()
-
-void
-rpmSetVeryVerbose()
-  CODE:
-  rpmSetVerbosity(RPMMESS_DEBUG);
-
-void
-rpmErrorSetCallback(fd)
-  int fd
-  CODE:
-  rpmError_callback_data = fd;
-  rpmErrorSetCallback(rpmError_callback);
-
-int
-rpmvercmp(char *a, char *b);
-';
-
-@macros = (
-  [ qw(int S_IFCHR S_IFBLK S_IFIFO KDSKBENT KT_SPEC K_NOSUCHMAP NR_KEYS MAX_NR_KEYMAPS BLKRRPART TIOCSCTTY
-       HDIO_GETGEO BLKGETSIZE LOOP_GET_STATUS HIDIOCAPPLICATION
-       MS_MGC_VAL MS_RDONLY O_NONBLOCK F_SETFL F_GETFL O_CREAT SECTORSIZE WNOHANG
-       VT_ACTIVATE VT_WAITACTIVE VT_GETSTATE CDROM_LOCKDOOR CDROMEJECT CDROM_DRIVE_STATUS CDS_DISC_OK
-       LOG_WARNING LOG_INFO LOG_LOCAL1
-       ) ],
-);
-
-$\= "\n";
-print;
-
-foreach (@macros) {
-    my ($type, @l) = @$_;
-    foreach (@l) {
-	print<< "END"
-$type
-$_()
-  CODE:
-  RETVAL = $_;
-
-  OUTPUT:
-  RETVAL
-
-END
-
-    }
-}
-print '
-
-PROTOTYPES: DISABLE
-';
-
diff --git a/perl-install/class_discard.pm b/perl-install/class_discard.pm
deleted file mode 100644
index 6ca677e9d..000000000
--- a/perl-install/class_discard.pm
+++ /dev/null
@@ -1,11 +0,0 @@
-package class_discard; # $Id$
-
-use log;
-
-sub new { bless {}, "class_discard" }
-
-sub AUTOLOAD {
-    log::l("class_discard: $AUTOLOAD called at ", caller, ", params ", join(', ', @_));
-}
-
-1;
diff --git a/perl-install/commands b/perl-install/commands
deleted file mode 100755
index f08fbb95c..000000000
--- a/perl-install/commands
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/usr/bin/perl
-
-use diagnostics;
-use strict;
-
-use lib qw(/usr/bin/perl-install .);
-use common;
-use commands;
-
-$::isInstall = 1;
-$::prefix = '/mnt';
-my $progname = basename($0);
-
-eval {
-    # hack as some functions are defined by perl... so chmod -> chmod_
-    &{$commands::{$progname} || $commands::{$progname . "_"} || \&err}(@ARGV), exit 0;
-};
-die formatError($@) . "\n";
-
-sub err { die "$0: unknown program (unimplemented)\n" }
diff --git a/perl-install/commands.pm b/perl-install/commands.pm
deleted file mode 100644
index 43dcbeca6..000000000
--- a/perl-install/commands.pm
+++ /dev/null
@@ -1,500 +0,0 @@
-package commands; # $Id$
-
-#-########################################################################
-#- This file implement many common shell commands:
-#- true, false, cat, which, dirname, basename, rmdir, lsmod, grep, tr,
-#- mount, umount, mkdir, mknod, ln, rm, chmod, chown, swapon,
-#- swapoff, ls, cp, ps, dd, head, tail, strings, hexdump, more, insmod,
-#- modprobe, route, df, kill, lspci, lssbus, dmesg, sort, du, 
-#-########################################################################
-
-use diagnostics;
-use strict;
-use vars qw($printable_chars *ROUTE *DF *PS);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub getopts {
-    my $o = shift;
-    my @r = map { '' } (@_ = split //, $_[0]);
-    while (1) {
-	local $_ = $o->[0];
-	$_ && /^-/ or return @r;
-	for (my $i = 0; $i < @_; $i++) { /$_[$i]/ and $r[$i] = $_[$i] }
-	shift @$o;
-    }
-    @r;
-}
-
-sub true() { exit 0 }
-sub false() { exit 1 }
-sub cat { @ARGV = @_; print while <> }
-sub dirname_ { print dirname(@_), "\n" }
-sub basename_ { print basename(@_), "\n" }
-sub rmdir_ { foreach (@_) { rmdir $_ or die "rmdir: can not remove $_\n" } }
-sub lsmod() { print "Module                  Size  Used by\n"; cat("/proc/modules") }
-sub which { 
-  ARG: foreach (@_) { foreach my $c (split /:/, $ENV{PATH}) { -x "$c/$_" and print("$c/$_\n"), next ARG } }
-}
-
-sub grep_ {
-    my ($h, $v, $i) = getopts(\@_, qw(hvi));
-    @_ == 0 || $h and die "usage: grep <regexp> [files...]\n";
-    my $r = shift;
-    $r = qr/$r/i if $i;
-    @ARGV = @_; (/$r/ xor $v) and print while <>;
-}
-
-sub tr_ {
-    my ($s, $c, $d) = getopts(\@_, qw(s c d));
-    @_ >= 1 + (!$d || $s) or die "usage: tr [-c] [-s [-d]] <set1> <set2> [files...]\n    or tr [-c] -d <set1> [files...]\n";
-    my $set1 = shift;
-    my $set2; !$d || $s and $set2 = shift;
-    @ARGV = @_;
-    eval "(tr/$set1/$set2/$s$d$c, print) while <>";
-}
-
-sub mount {
-    @_ or return cat("/proc/mounts");
-    my ($t, $r) = getopts(\@_, qw(tr));
-    my $fs = $t && shift;
-
-    @_ == 2 or die "usage: mount [-r] [-t <fs>] <device> <dir>\n",
-    "       (use -r for readonly)\n",
-    "       (if /dev/ is left off the device name, a temporary node will be created)\n";
-
-    my ($dev, $where) = @_;
-    $fs ||= $dev =~ /:/ ? "nfs" :
-            $dev =~ /fd/ ? "vfat" : "ext2";
-
-    require fs;
-    require modules;
-    modules::load_dependencies("/modules/modules.dep");
-    fs::mount($dev, $where, $fs, $r);
-}
-
-sub umount {
-    @_ == 1 or die "umount expects a single argument\n";
-
-    require fs;
-    fs::umount($_[0]);
-}
-
-sub mkdir_ {
-    my ($_rec) = getopts(\@_, qw(p));
-    mkdir_p($_) foreach @_;
-}
-
-
-sub mknod {
-    if (@_ == 1) {
-	require devices;
-	eval { devices::make($_[0]) }; $@ and die "mknod: failed to create $_[0]\n";
-    } elsif (@_ == 4) {
-	require c;
-	my $mode = ${{ "b" => c::S_IFBLK(), "c" => c::S_IFCHR() }}{$_[1]} or die "unknown node type $_[1]\n";
-	syscall_('mknod', my $_a = $_[0], $mode | 0600, makedev($_[2], $_[3])) or die "mknod failed: $!\n";
-    } else { die "usage: mknod <path> [b|c] <major> <minor> or mknod <path>\n" }
-}
-
-sub ln {
-    my ($force, $soft) = getopts(\@_, qw(fs));
-    @_ >= 1 or die "usage: ln [-s] [-f] <source> [<dest>]\n";
-
-    my ($source, $dest) = @_;
-    $dest ||= basename($source);
-
-    $force and unlink $dest;
-
-    ($soft ? symlink($source, $dest) : link($source, $dest)) or die "ln failed: $!\n";
-}
-
-sub rm {
-    my ($rec, undef) = getopts(\@_, qw(rf));
-
-    my $rm; $rm = sub {
-	foreach (@_) {
-	    if (!-l $_ && -d $_) {
-		$rec or die "$_ is a directory\n";
-		&$rm(glob_($_));
-		rmdir $_ or die "can not remove directory $_: $!\n";
-	    } else { unlink $_ or die "rm of $_ failed: $!\n" }
-	}
-    };
-    &$rm(@_);
-}
-
-sub chmod_ {
-    @_ >= 2 or die "usage: chmod <mode> <files>\n";
-
-    my $mode = shift;
-    $mode =~ /^[0-7]+$/ or die "illegal mode $mode\n";
-
-    foreach (@_) { chmod oct($mode), $_ or die "chmod failed $_: $!\n" }
-}
-
-sub chown_ {
-    my ($rec, undef) = getopts(\@_, qw(r));
-    local $_ = shift or die "usage: chown [-r] name[.group] <files>\n";
-
-    my ($name, $group) = (split('\.'), $_);
-
-    my ($uid, $gid) = (getpwnam($name) || $name, getgrnam($group) || $group);
-
-    my $chown; $chown = sub {
-	foreach (@_) {
-	    chown $uid, $gid, $_ or die "chown of file $_ failed: $!\n";
-	    -d $_ && $rec and &$chown(glob_($_));
-	}
-    };
-    &$chown(@_);
-}
-
-sub swapon {
-    @_ == 1 or die "swapon <file>\n";
-    require fs;
-    fs::swapon($_[0]);
-}
-sub swapoff {
-    @_ == 1 or die "swapoff <file>\n";
-    require fs;
-    fs::swapoff($_[0]);
-}
-
-sub uncpio {
-    @_ and die "uncpio reads from stdin\n";
-
-#    cpioInstallArchive(gzdopen(0, "r"), NULL, 0, NULL, NULL, &fail);
-}
-
-
-sub rights {
-    my $r = '-' x 9;
-    my @rights = (qw(x w r x w r x w r), ['t', 0], ['s', 3], ['s', 6]);
-    for (my $i = 0; $i < @rights; $i++) {
-	if (vec(pack("S", $_[0]), $i, 1)) {
-	    my ($val, $place) = $i >= 9 ? @{$rights[$i]} : ($rights[$i], $i);
-	    my $old = \substr($r, 8 - $place, 1);
-	    $$old = $$old eq '-' && $i >= 9 ? uc $val : $val;
-	}
-    }
-    my @types = split //, "_pc_d_b_-_l_s";
-    $types[($_[0] >> 12) & 0xf] . $r;
-}
-
-sub displaySize {
-    my $m = $_[0] >> 12;
-    $m == 4 || $m == 8 || $m == 10;
-}
-
-sub ls {
-    my ($l, $h) = getopts(\@_, qw(lh));
-    $h and die "usage: ls [-l] <files...>\n";
-
-    @_ or @_ = '.';
-    @_ == 1 && -d $_[0] and @_ = glob_($_[0]);
-    foreach (sort @_) {
-	if ($l) {
-	    my @s = lstat or warn("can not stat file $_\n"), next;
-	    formline(
-"@<<<<<<<<< @<<<<<<< @<<<<<<< @>>>>>>>> @>>>>>>>>>>>>>>> @*\n",
-		     rights($s[2]), getpwuid $s[4] || $s[4], getgrgid $s[5] || $s[5],
-		     displaySize($s[2]) ? $s[7] : join(", ", unmakedev($s[6])),
-		     scalar localtime $s[9], -l $_ ? "$_ -> " . readlink $_ : $_);
-	    print $^A; $^A = '';
-	} else { print "$_\n" }
-    }
-}
-sub cp {
-    @_ >= 2 or die "usage: cp <sources> <dest>\n(this cp does -Rfl by default)\n";
-    cp_af(@_);
-}
-
-sub ps {
-    @_ and die "usage: ps\n";
-    my ($pid, $rss, $cpu, $cmd);
-    my ($uptime) = split ' ', first(cat_("/proc/uptime"));
-    my $hertz = 100;
-
-    require c;
-    my $page = c::getpagesize() / 1024;
-
-    open PS, ">&STDOUT"; #- PS must be not be localised otherwise the "format PS" fails
-    format PS_TOP =
-  PID   RSS %CPU CMD
-.
-    format PS =
-@>>>> @>>>> @>>> @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-$pid, $rss, $cpu, $cmd
-.
-    foreach (sort { $a <=> $b } grep { /\d+/ } all('/proc')) {
-	$pid = $_;
-	my @l = split(' ', cat_("/proc/$pid/stat"));
-	$cpu = sprintf "%2.1f", max(0, min(99, ($l[13] + $l[14]) * 100 / $hertz / ($uptime - $l[21] / $hertz)));
-	$rss = (split ' ', cat_("/proc/$pid/stat"))[23] * $page;
-	($cmd = cat_("/proc/$pid/cmdline")) =~ s/\0/ /g;
-	$cmd ||= (split ' ', (cat_("/proc/$pid/stat"))[0])[1];
-	write PS;
-    }
-}
-
-
-sub dd {
-    my $u = "usage: dd [-h] [-p] [if=<file>] [of=<file>] [bs=<number>] [count=<number>]\n";
-    my ($help, $percent) = getopts(\@_, qw(hp));
-    die $u if $help;
-    my %h = (if => *STDIN, of => *STDOUT, bs => 512, count => undef);
-    foreach (@_) {
-	/(.*?)=(.*)/ && exists $h{$1} or die $u;
-	$h{$1} = $2;
-    }
-    local (*IF, *OF); my ($tmp, $nb, $read);
-    ref($h{if}) eq 'GLOB' ? (*IF = $h{if}) : sysopen(IF, $h{if}, 0)    || die "error: can not open file $h{if}\n";
-    ref($h{of}) eq 'GLOB' ? (*OF = $h{of}) : sysopen(OF, $h{of}, 0x41) || die "error: can not open file $h{of}\n";
-
-    $h{bs} = removeXiBSuffix($h{bs});
-
-    for ($nb = 0; !$h{count} || $nb < $h{count}; $nb++) {
-	printf "\r%02.1d%%", 100 * $nb / $h{count} if $h{count} && $percent;
-	$read = sysread(IF, $tmp, $h{bs}) or ($h{count} ? die "error: can not read block $nb\n" : last);
-	syswrite(OF, $tmp) or die "error: can not write block $nb\n";
-	$read < $h{bs} and $read = 1, last;
-    }
-    print STDERR "\r$nb+$read records in\n";
-    print STDERR   "$nb+$read records out\n";
-}
-
-sub head_tail {
-    my ($h, $n) = getopts(\@_, qw(hn));
-    $h || @_ < to_bool($n) and die "usage: $0 [-h] [-n lines] [<file>]\n";
-    $n = $n ? shift : 10;
-    my $fh; @_ ? open($fh, $_[0]) || die "error: can not open file $_[0]\n" : ($fh = *STDIN);
-
-    if ($0 eq 'head') {
-	local $_;
-	while (<$fh>) { $n-- or return; print }
-    } else {
-	@_ = (); 
-	local $_;
-	while (<$fh>) { push @_, $_; @_ > $n and shift }
-	print @_;
-    }
-}
-sub head { $0 = 'head'; &head_tail }
-sub tail { $0 = 'tail'; &head_tail }
-
-sub strings {
-    my ($h, $o, $n) = getopts(\@_, qw(hon));
-    $h and die "usage: strings [-o] [-n min-length] [<files>]\n";
-    $n = $n ? shift : 4;
-    $/ = "\0"; @ARGV = @_; my $l = 0; 
-    local $_;
-    while (<>) {
-	while (/[$printable_chars]{$n,}/og) {
-	    printf "%07d ", ($l + length $') if $o;
-	    print "$&\n";
-	}
-	$l += length;
-    } continue { $l = 0 if eof }
-}
-
-sub hexdump {
-    my $i = 0; $/ = \16; @ARGV = @_; 
-    local $_;
-    while (<>) {
-	printf "%08lX  ", $i; $i += 16;
-	print join(" ", (map { sprintf "%02X", $_ } unpack("C*", $_)),
-		   (s/[^$printable_chars]/./og, $_)[1]), "\n";
-    }
-}
-
-sub more {
-    @ARGV = @_;
-    require devices;
-    my $tty = devices::make('tty');
-    my $n = 0; 
-    open(my $IN, $tty) or die "can not open $tty\n";
-    local $_;
-    while (<>) {
-	if (++$n == 25) {
-	    my $v = <$IN>;
-	    $v =~ /^q/ and exit 0;
-	    $n = 0;
-	}
-	print;
-    }
-}
-
-sub insmod {
-    my ($h) = getopts(\@_, qw(h));
-    $h || @_ == 0 and die "usage: insmod <module> [options]\n";
-    my $f = shift;
-
-    require run_program;
-    require modules;
-
-    if (! -r $f) {
-	my $name = basename($f);
-	$name =~ s/\.k?o$//;
-	($f) = modules::extract_modules('/tmp', $name);
-    }
-    if (! -r $f) {
-	die "can not find module $f\n";
-    }
-    run_program::run(["insmod_", "insmod"], "-f", $f, @_) or die("insmod $f failed");
-    unlink $f;
-}
-
-sub modprobe {
-    my ($h) = getopts(\@_, qw(h));
-    $h || @_ == 0 and die "usage: modprobe <module> [options]\n";
-    my $name = shift;
-    require modules;
-    modules::load_dependencies("/modules/modules.dep");
-    modules::load_with_options([ $name ], { $name => join(' ', @_) });
-}
-
-sub route {
-    @_ == 0 or die "usage: route\nsorry, no modification handled\n";
-    my ($titles, @l) = cat_("/proc/net/route");
-    my @titles = split ' ', $titles;
-    my %l;
-    open ROUTE, ">&STDOUT"; #- ROUTE must be not be localised otherwise the "format ROUTE" fails
-    format ROUTE_TOP =
-Destination    Gateway        Mask           Iface
-.
-    format ROUTE =
-@<<<<<<<<<<<<  @<<<<<<<<<<<<  @<<<<<<<<<<<<  @<<<<<<<
-$l{Destination}, $l{Gateway}, $l{Mask}, $l{Iface}
-.
-    foreach (@l) {
-	/^\s*$/ and next;
-	@l{@titles} = split;
-	$_ = join ".", reverse map { hex $_ } unpack "a2a2a2a2", $_ foreach @l{qw(Destination Gateway Mask)};
-	$l{Destination} = 'default' if $l{Destination} eq "0.0.0.0";
-	$l{Gateway}     = '*'       if $l{Gateway}     eq "0.0.0.0";
-	write ROUTE;
-    }
-}
-
-sub df {
-    my ($h) = getopts(\@_, qw(h));
-    my ($dev, $size, $free, $used, $use, $mntpoint);
-    open DF, ">&STDOUT"; #- DF must be not be localised otherwise the "format DF" fails
-    format DF_TOP =
-Filesystem          Size      Used    Avail     Use  Mounted on
-.
-    format DF =
-@<<<<<<<<<<<<<<<< @>>>>>>> @>>>>>>> @>>>>>>> @>>>>>% @<<<<<<<<<<<<<<<<<<<<<<<<<
-$dev, $size, $used, $free, $use, $mntpoint
-.
-    my %h;
-    foreach (cat_("/proc/mounts"), cat_("/etc/mtab")) {
-	($dev, $mntpoint) = split;
-	$h{$dev} = $mntpoint;
-    }
-    foreach (sort keys %h) {
-	$dev = $_;
-	($size, $free) = MDK::Common::System::df($mntpoint = $h{$dev});
-	$size or next;
-
-	$use = int(100 * ($size - $free) / $size);
-	$used = $size - $free;
-	if ($h) {
-	    $used = int($used / 1024 . "M");
-	    $size = int($size / 1024 . "M");
-	    $free = int($free / 1024 . "M");
-	}
-	write DF if $size;
-    }
-}
-
-sub kill {
-    my $signal = 15;
-    @_ or die "usage: kill [-<signal>] pids\n";
-    $signal = (shift, $1)[1] if $_[0] =~ /^-(.*)/;
-    kill $signal, @_ or die "kill failed: $!\n";
-}
-
-sub lspci() { lspcidrake() }
-sub lspcidrake() {
-    require detect_devices;
-    print join "\n", detect_devices::stringlist(), '';
-}
-*lssbus = \&lspci;
-
-sub dmesg() { print cat_("/tmp/syslog") }
-
-sub sort {
-    my ($n, $h) = getopts(\@_, qw(nh));
-    $h and die "usage: sort [-n] [<file>]\n";
-    my $fh; @_ ? open($fh, $_[0]) || die "error: can not open file $_[0]\n" : ($fh = *STDIN);
-    if ($n) {
-	print(sort { $a <=> $b } <$fh>);
-    } else {
-	print(sort <$fh>);
-    }
-}
-
-sub du {
-    my ($s, $h) = getopts(\@_, qw(sh));
-    $h || !$s and die "usage: du -s [<directories>]\n";
-
-    my $f; $f = sub {
-	my ($e) = @_;
-	my $s = (lstat($e))[12];
-	$s += sum(map { &$f($_) } glob_("$e/*")) if !-l _ && -d _;
-	$s;
-    };
-    print &$f($_) >> 1, "\t$_\n" foreach @_ ? @_ : glob_("*");
-}
-
-sub  install_cpio($$;@) {
-    my ($dir, $name, @more) = @_; 
-
-    return "$dir/$name" if -e "$dir/$name";
-
-    my $cpio = "$dir.cpio.bz2";
-    -e $cpio or return;
-
-    eval { rm("-r", $dir) };
-    mkdir $dir, 0755;
-    require run_program;
-    
-    my $more = join " ", map { $_ && "$_ $_/*" } @more;
-    run_program::run("cd $dir ; $ENV{LD_LOADER} bzip2 -cd $cpio | $ENV{LD_LOADER} cpio -id $name $name/* $more");
-
-    "$dir/$name";
-}
-
-sub bug {
-    my ($h) = getopts(\@_, "h");
-    $h and die "usage: bug\nput file report.bug on fat formatted floppy\n";
-
-    require detect_devices;
-    mount devices::make(detect_devices::floppy()), "/fd0";
-
-    require install_any;
-    output("/fd0/report.bug", install_any::report_bug());
-    umount "/fd0";
-    common::sync();
-}
-
-sub loadkeys {
-    my ($h) = getopts(\@_, "h");
-    $h || @_ != 1 and die "usage: loadkeys <keyboard>\n";
-
-    require keyboard;
-    keyboard::setup({ KEYBOARD => $_[0] });
-}
-
-sub sync() { common::sync() }
-
-1;
diff --git a/perl-install/common.pm b/perl-install/common.pm
deleted file mode 100644
index 15da3a2c5..000000000
--- a/perl-install/common.pm
+++ /dev/null
@@ -1,308 +0,0 @@
-package common; # $Id$
-
-use MDK::Common;
-use MDK::Common::System;
-use diagnostics;
-use strict;
-use run_program;
-use vars qw(@ISA @EXPORT $SECTORSIZE);
-
-@ISA = qw(Exporter);
-# no need to export ``_''
-@EXPORT = qw($SECTORSIZE N N_ check_for_xserver files_exist formatTime formatXiB is_xbox makedev mandrake_release removeXiBSuffix require_root_capability salt setVirtual set_alternative set_l10n_sort set_permissions translate unmakedev untranslate);
-
-# perl_checker: RE-EXPORT-ALL
-push @EXPORT, @MDK::Common::EXPORT;
-
-
-$::prefix ||= ""; # no warning
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-our $SECTORSIZE  = 512;
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-
-sub sprintf_fixutf8 {
-    my $need_upgrade;
-    $need_upgrade |= to_bool(c::is_tagged_utf8($_)) + 1 foreach @_;
-    if ($need_upgrade == 3) { c::upgrade_utf8($_) foreach @_ }
-    sprintf shift, @_;
-}
-
-sub N {
-    $::one_message_has_been_translated ||= join(':', (caller(0))[1,2]); #- see ugtk2.pm
-    my $s = shift @_; my $t = translate($s);
-    sprintf_fixutf8 $t, @_;
-}
-sub N_ { $_[0] }
-
-
-sub salt {
-    my ($nb) = @_;
-    require devices;
-    open(my $F, devices::make("random")) or die "missing random";
-    my $s; read $F, $s, $nb;
-    $s = pack("b8" x $nb, unpack "b6" x $nb, $s);
-    $s =~ tr|\0-\x3f|0-9a-zA-Z./|;
-    $s;
-}
-
-sub makedev { ($_[0] << 8) | $_[1] }
-sub unmakedev { $_[0] >> 8, $_[0] & 0xff }
-
-sub translate_real {
-    my ($s) = @_;
-    $s or return '';
-    foreach (@::textdomains, 'libDrakX') {
-	my $s2 = c::dgettext($_, $s);
-	return $s2 if $s ne $s2;
-    }
-    $s;
-}
-
-sub translate {
-    my $s = translate_real(@_);
-    $::need_utf8_i18n and c::set_tagged_utf8($s);
-
-    #- translation with context, kde-like 
-    $s =~ s/^_:.*\n//;
-    $s;
-}
-
-
-sub untranslate {
-    my $s = shift || return;
-    foreach (@_) { translate($_) eq $s and return $_ }
-    die "untranslate failed";
-}
-
-#- This is needed because text printed by Gtk2 will always be encoded
-#- in UTF-8;
-#- we first check if LC_ALL is defined, because if it is, changing
-#- only LC_COLLATE will have no effect.
-sub set_l10n_sort() {
-    my $collation_locale = $ENV{LC_ALL};
-    if (!$collation_locale) {
-	require POSIX;
-        $collation_locale = POSIX::setlocale(POSIX::LC_COLLATE());
-        $collation_locale =~ /UTF-8/ or POSIX::setlocale(POSIX::LC_COLLATE(), "$collation_locale.UTF-8");
-    }
-}
-
-
-BEGIN { undef *availableRamMB }
-sub availableRamMB()  { 
-    my $s = MDK::Common::System::availableRamMB();
-    #- HACK HACK: if i810 and memsize
-    require detect_devices;
-    return $s - 1 if $s == 128 && detect_devices::matching_driver__regexp('^Card:Intel 810$');
-    $s;
-}
-
-sub setVirtual {
-    my ($vt_number) = @_;
-    my $vt = '';
-    sysopen(my $C, "/dev/console", 2) or die "failed to open /dev/console: $!";
-    ioctl($C, c::VT_GETSTATE(), $vt) &&
-      ioctl($C, c::VT_ACTIVATE(), $vt_number) &&
-	ioctl($C, c::VT_WAITACTIVE(), $vt_number) or die "setVirtual failed";
-    unpack "S", $vt;
-}
-
-sub nonblock {
-    my ($F) = @_;
-    fcntl($F, c::F_SETFL(), fcntl($F, c::F_GETFL(), 0) | c::O_NONBLOCK());
-}
-
-sub removeXiBSuffix {
-    local $_ = shift;
-
-    /(\d+)\s*kB?$/i and return $1 * 1024;
-    /(\d+)\s*MB?$/i and return $1 * 1024 * 1024;
-    /(\d+)\s*GB?$/i and return $1 * 1024 * 1024 * 1024;
-    /(\d+)\s*TB?$/i and return $1 * 1024 * 1024 * 1024 * 1024;
-    $_;
-}
-sub formatXiB {
-    my ($newnb, $o_newbase) = @_;
-    my $newbase = $o_newbase || 1;
-    my ($nb, $base);
-    my $decr = sub { 
-	($nb, $base) = ($newnb, $newbase);
-	$base >= 1024 ? ($newbase = $base / 1024) : ($newnb = $nb / 1024);
-    };
-    foreach ('', N("KB"), N("MB"), N("GB")) {
-	$decr->(); 
-	if ($newnb < 1 && $newnb * $newbase < 1) {
-	    my $v = $nb * $base;
-	    my $s = $v < 10 && int(10 * $v - 10 * int($v));
-	    return int($v) . ($s ? ".$s" : '') . $_;
-	}
-    }
-    int($newnb * $newbase) . N("TB");
-}
-
-sub formatTime {
-    my ($s, $m, $h) = gmtime($_[0]);
-    if ($h) {
-	sprintf "%02d:%02d", $h, $m;
-    } elsif ($m > 1) {
-	N("%d minutes", $m);
-    } elsif ($m == 1) {
-	N("1 minute");
-    } else {
-	N("%d seconds", $s);
-    }
-}
-
-sub expand_symlinks_but_simple {
-    my ($f) = @_;
-    my $link = readlink($f);
-    my $f2 = expand_symlinks($f);
-    if ($link && $link !~ m|/|) {
-	# put back the last simple symlink
-	$f2 =~ s|\Q$link\E$|basename($f)|e;
-    }
-    $f2;
-}
-
-sub sync { &MDK::Common::System::sync }
-
-BEGIN { undef *formatError }
-sub formatError {
-    my ($err) = @_;
-    ref($err) eq 'SCALAR' and $err = $$err;
-    log::l("error: $err");
-    &MDK::Common::String::formatError($err);
-}
-
-# Group the list by n. Returns a reference of lists of length n
-sub group_n_lm {
-    my $n = shift;
-    my @l;
-    push @l, [ splice(@_, 0, $n) ] while @_;
-    @l;
-}
-
-sub join_lines {
-    my @l;
-    my $s;
-    foreach (@_) {
-	if (/^\s/) {
-	    $s .= $_;
-	} else {
-	    push @l, $s if $s;
-	    $s = $_;
-	}
-    }
-    @l, if_($s, $s);
-}
-
-
-sub set_alternative {
-    my ($command, $executable) = @_;
-
-    #- check the existance of $executable as an alternative for $command
-    #- (is this needed???)
-    run_program::rooted_get_stdout($::prefix, 'update-alternatives', '--display', $command) =~ /^\Q$executable /m or return;
-
-    #- this does not handle relative symlink, but neither does update-alternatives ;p
-    symlinkf $executable, "$::prefix/etc/alternatives/$command";
-}
-
-sub files_exist { and_(map { -f "$::prefix$_" } @_) }
-
-sub secured_file {
-    my ($f) = @_;
-    c::is_secure_file($f) or die "can not ensure a safe $f";
-    $f;
-}
-
-sub set_permissions {
-    my ($file, $perms, $o_owner, $o_group) = @_;
-    # We only need to set the permissions during installation to be able to
-    # print test pages. After installation the devfsd daemon does the business
-    # automatically.
-    return 1 unless $::isInstall;
-    if ($o_owner && $o_group) {
-        run_program::rooted($::prefix, "/bin/chown", "$o_owner.$o_group", $file)
-	    or die "Could not start chown!";
-    } elsif ($o_owner) {
-        run_program::rooted($::prefix, "/bin/chown", $o_owner, $file)
-	    or die "Could not start chown!";
-    } elsif ($o_group) {
-        run_program::rooted($::prefix, "/bin/chgrp", $o_group, $file)
-	    or die "Could not start chgrp!";
-    }
-    run_program::rooted($::prefix, "/bin/chmod", $perms, $file)
-	or die "Could not start chmod!";
-}
-
-sub release_file {
-    my ($o_dir) = @_;
-    find { -r "$o_dir$_" } map { "/etc/$_" } 'mandrakelinux-release', 'mandrake-release', 'release', 'redhat-release';
-}
-
-sub mandrake_release {
-    my ($o_dir) = @_;
-    my $f = release_file($o_dir);
-    $f && chomp_(cat_("$o_dir$f"));
-}
-
-sub require_root_capability() {
-    return if $::testing || !$>; # we're already root
-    if (check_for_xserver()) {
-	if (fuzzy_pidofs(qr/\bkwin\b/) > 0) {
-	    exec("kdesu", "--ignorebutton", "-c", "$0 @ARGV") or die N("kdesu missing");
-	}
-    }
-    exec { 'consolehelper' } $0, @ARGV or die N("consolehelper missing");
-
-    # still not root ?
-    die "you must be root to run this program" if $>;
-}
-
-sub check_for_xserver() {
-    if (!defined $::xtest) {
-	$::xtest = 0;         
-	eval { 
-	    require xf86misc::main; 
-	    $::xtest = xf86misc::main::Xtest($ENV{DISPLAY});
-	} if $ENV{DISPLAY};
-    }
-    return $::xtest;
-}
-
-sub is_xbox() {
-    require detect_devices;
-    any { $_->{vendor} == 0x10de && $_->{id} == 0x02a5 } detect_devices::pci_probe();
-}
-
-#- special unpack
-#- - returning an array refs for each element like "s10"
-#- - handling things like s10* at the end of the format
-sub unpack_with_refs {
-    my ($format, $s) = @_;
-    my $initial_format = $format;
-    my @r;
-    while ($format =~ s/\s*(\w(\d*))(\*?)\s*//) {
-	my ($sub_format, $nb, $many) = ($1, $2, $3);
-	$many && $format and internal_error("bad * in the middle of format in $initial_format");
-
-	my $done = $many && !length($s);
-	while (!$done) {
-	    my @l = unpack("$sub_format a*", $s);
-	    $s = pop @l;
-	    push @r, $nb ? \@l : @l;
-	    $done = !$many || !length($s);
-	}
-    }
-    @r;
-}
-
-1;
diff --git a/perl-install/crypto.pm b/perl-install/crypto.pm
deleted file mode 100644
index c07556f9f..000000000
--- a/perl-install/crypto.pm
+++ /dev/null
@@ -1,802 +0,0 @@
-package crypto; # $Id$
-
-use diagnostics;
-use strict;
-
-use vars qw(%url2land %land2tzs %static_mirrors %mirrors);
-
-use MDK::Common::System;
-use common;
-use log;
-use ftp;
-
-%url2land = (
-	     at => N("Austria"),
-	     au => N("Australia"),
-	     be => N("Belgium"),
-	     br => N("Brazil"),
-	     ca => N("Canada"),
-	     ch => N("Switzerland"),
-	     cr => N("Costa Rica"),
-	     cz => N("Czech Republic"),
-	     de => N("Germany"),
-	     dk => N("Denmark"),
-	     ee => N("Estonia"),
-	     es => N("Spain"),
-	     fi => N("Finland"),
-	     fr => N("France"),
-	     gr => N("Greece"),
-	     hu => N("Hungary"),
-	     ie => N("Ireland"),
-	     il => N("Israel"),
-	     it => N("Italy"),
-	     jp => N("Japan"),
-	     nl => N("Netherlands"),
-	     no => N("Norway"),
-	     nz => N("New Zealand"),
-	     pl => N("Poland"),
-	     pt => N("Portugal"),
-	     ru => N("Russia"),
-	     se => N("Sweden"),
-	     sk => N("Slovakia"),
-	     th => N("Thailand"),
-	     tw => N("Taiwan"),
-	     za => N("South Africa"),
-	    );
-
-%land2tzs = (
-	     N("Australia") => [ 'Australia/Sydney' ],
-	     N("Austria") => [ 'Europe/Vienna', 'Europe/Brussels', 'Europe/Berlin' ],
-	     N("Belgium") => [ 'Europe/Brussels', 'Europe/Paris', 'Europe/Berlin' ],
-	     N("Brazil") => [ 'Brazil/East' ],
-	     N("Canada") => [ 'Canada/Atlantic', 'Canada/Eastern' ],
-	     N("Czech Republic") => [ 'Europe/Prague', 'Europe/Berlin' ],
-	     N("Denmark") => [ 'Europe/Copenhagen', 'Europe/Berlin' ],
-	     N("Estonia") => [ 'Europe/Tallinn', 'Europe/Helsinki' ],
-	     N("Finland") => [ 'Europe/Helsinki', 'Europe/Tallinn' ],
-	     N("France") => [ 'Europe/Paris', 'Europe/Brussels', 'Europe/Berlin' ],
-	     N("Germany") => [ 'Europe/Berlin', 'Europe/Prague' ],
-	     N("Greece") => [ 'Europe/Athens', 'Europe/Prague' ],
-	     N("Hungary") => [ 'Europe/Budapest' ],
-	     N("Ireland") => [ 'Europe/Dublin', 'Europe/London' ],
-	     N("Israel") => [ 'Asia/Tel_Aviv' ],
-	     N("Italy") => [ 'Europe/Rome', 'Europe/Brussels', 'Europe/Paris' ],
-	     N("Japan") => [ 'Asia/Tokyo', 'Asia/Seoul' ],
-	     N("Netherlands") => [ 'Europe/Amsterdam', 'Europe/Brussels', 'Europe/Berlin' ],
-	     N("New Zealand") => [ 'Pacific/Auckland' ],
-	     N("Norway") => [ 'Europe/Oslo', 'Europe/Stockholm' ],
-	     N("Poland") => [ 'Europe/Warsaw' ],
-	     N("Portugal") => [ 'Europe/Lisbon', 'Europe/Madrid' ],
-	     N("Russia") => [ 'Europe/Moscow', ],
-	     N("Slovakia") => [ 'Europe/Bratislava' ],
-	     N("South Africa") => [ 'Africa/Johannesburg' ],
-	     N("Spain") => [ 'Europe/Madrid', 'Europe/Lisbon' ],
-	     N("Sweden") => [ 'Europe/Stockholm', 'Europe/Oslo' ],
-	     N("Switzerland") => [ 'Europe/Zurich', 'Europe/Berlin', 'Europe/Brussels' ],
-	     N("Taiwan") => [ 'Asia/Taipei', 'Asia/Seoul' ],
-	     N("Thailand") => [ 'Asia/Bangkok', 'Asia/Seoul' ],
-	     N("United States") => [ 'America/New_York', 'Canada/Atlantic', 'Asia/Tokyo', 'Australia/Sydney', 'Europe/Paris' ],
-	    );
-
-%static_mirrors = (
-#		   "ackbar" => [ "Ackbar", "/updates", "a", "a" ],
-		  );
-
-%mirrors = ();
-
-sub mirror2text { $mirrors{$_[0]} && $mirrors{$_[0]}[0] . '|' . $_[0] }
-sub mirrors {
-    my ($o_distro_type, $o_use_local_list) = @_;
-
-    unless (keys %mirrors) {
-	my $f;
-	if ($o_use_local_list) {
-	    $f = \*DATA;
-	} else {
-	    #- contact the following URL to retrieve the list of mirrors.
-	    require http;
-	    $f = http::getFile("http://www.mandrivalinux.com/mirrorsfull.list");
-	}
-
-	local $SIG{ALRM} = sub { die "timeout" };
-	$o_use_local_list or alarm 60;
-	my $distro_type = $o_distro_type || 'updates';
-	my $sub_dir = $distro_type =~ /cooker|community/ ? '' : '/' . version() . '/main_updates';
-	foreach (<$f>) {
-	    my ($arch, $url, $dir) = m|$distro_type([^:]*):ftp://([^/]*)(/\S*)| or next;
-	    MDK::Common::System::compat_arch($arch) or next;
-	    my $land = N("United States");
-	    foreach (keys %url2land) {
-		my $qu = quotemeta $_;
-		$url =~ /\.$qu(?:\..*)?$/ and $land = $url2land{$_};
-	    }
-	    $mirrors{$url} = [ $land, $dir . $sub_dir ];
-	}
-	unless ($o_use_local_list) {
-	    http::getFile('/XXX'); #- close connection.
-	    alarm 0; 
-	}
-
-	#- now add static mirror (in case of something wrong happened above).
-	add2hash(\%mirrors, \%static_mirrors);
-    }
-    keys %mirrors;
-}
-
-sub bestMirror {
-    my ($string, $o_distro_type) = @_;
-    my %mirror2value;
-
-    foreach my $url (mirrors($o_distro_type)) {
-	my $value = 0;
-	my $cvalue = mirrors($o_distro_type);
-
-	$mirror2value{$url} ||= 1 + $cvalue;
-	foreach (@{$land2tzs{$mirrors{$url}[0]} || []}) {
-	    $_ eq $string and $mirror2value{$url} > $value and $mirror2value{$url} = $value;
-	    (split '/')[0] eq (split '/', $string)[0] and $mirror2value{$url} > $cvalue and $mirror2value{$url} = $cvalue;
-	    ++$value;
-	}
-    }
-    my $min_value = min(values %mirror2value);
-
-    my @possible = (grep { $mirror2value{$_} == $min_value } keys %mirror2value) x 2; #- increase probability
-    push @possible, grep { $mirror2value{$_} == 1 + $min_value } keys %mirror2value;
-
-    $possible[rand @possible];
-}
-
-#- hack to retrieve Mandrivaalinux version...
-sub version() {
-    require pkgs;
-    my $pkg = pkgs::packageByName($::o->{packages}, 'mandrakelinux-release');
-    $pkg && $pkg->version || '9.1'; #- safe but dangerous ;-)
-}
-
-sub dir { $mirrors{$_[0]}[1] }
-sub ftp($) { ftp::new($_[0], dir($_[0])) }
-
-sub getFile {
-    my ($file, $o_host) = @_;
-    my $host = $o_host || $crypto::host;
-    my $dir = dir($host);
-    log::l("getting crypto file $file on directory $dir with login $mirrors{$host}[2]");
-    my ($ftp, $retr) = ftp::new($host, $dir,
-				if_($mirrors{$host}[2], $mirrors{$host}[2]),
-				if_($mirrors{$host}[3], $mirrors{$host}[3])
-			       );
-    $$retr->close if $$retr;
-    $$retr   = $ftp->retr($file) or ftp::rewindGetFile();
-    $$retr ||= $ftp->retr($file);
-}
-
-sub getPackages {
-    my ($packages, $mirror) = @_;
-
-    $crypto::host = $mirror;
-
-    #- get pubkey file first as we cannot handle 2 files opened simultaneously.
-    my $pubkey;
-    eval {
-	my $fpubkey = getFile("media_info/pubkey", $mirror);
-	$pubkey = [ $packages->parse_armored_file($fpubkey) ];
-    };
-
-    #- check first if there is something to get...
-    my $fhdlist = getFile("media_info/hdlist.cz", $mirror);
-    unless ($fhdlist) {
-	log::l("no updates available, bailing out");
-	return;
-    }
-    
-    #- extract hdlist of crypto, then depslist.
-    require pkgs;
-    my $update_medium = pkgs::psUsingHdlist('ftp', $packages, "hdlist-updates.cz", "1u", "",
-					    "Updates for Mandriva Linux " . version(), 1, $fhdlist, $pubkey);
-    if ($update_medium) {
-	log::l("read updates hdlist");
-	#- keep in mind where is the URL prefix used according to mirror (for install_any::install_urpmi).
-	$update_medium->{prefix} = "ftp://$mirror" . dir($mirror);
-	#- (re-)enable the medium to allow install of package,
-	#- make it an update medium (for install_any::install_urpmi).
-	$update_medium->{selected} = 1;
-	$update_medium->{update} = 1;
-
-	$install_any::global_ftp_prefix = [ $mirror, dir($mirror) ]; #- host, dir (for install_any::getFile)
-
-	#- search for packages to update.
-	$packages->{rpmdb} ||= pkgs::rpmDbOpen();
-	pkgs::selectPackagesToUpgrade($packages, $update_medium);
-    }
-    return $update_medium;
-}
-
-sub get {
-    my ($mirror, $dir, @files) = @_;
-    foreach (@files) {
-	log::l("crypto: downloading $_");
-	ftp($mirror)->get($_, "$dir/$_"); 
-    }
-    int @files;
-}
-
-1;
-
-#- mirror list, hardcoded here to be used in mini-cds (ftp suppl. media)
-__DATA__
-communityi586:ftp://ftp-linux.cc.gatech.edu/pub/linux/distributions/mandrake/devel/community/i586/media/main
-communityi586:ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://ftp.gwdg.de/pub/linux/mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://ftp.join.uni-muenster.de/pub/linux/distributions/mandrake-devel/community/i586/media/main
-communityi586:ftp://ftp.lip6.fr/pub/linux/distributions/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://ftp.nluug.nl/pub/os/Linux/distr/Mandrake/devel/community/i586/media/main
-communityi586:ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://ftp.sunet.se/pub/Linux/distributions/mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://ftp.surfnet.nl/pub/os/Linux/distr/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://ftp.tugraz.at/mirror/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://ftp.uninett.no/pub/unix/Linux/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://ftp.u-strasbg.fr/pub/linux/distributions/mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://gd.tuwien.ac.at/pub/linux/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://jungle.metalab.unc.edu/pub/Linux/distributions/mandrake/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://mandrake.contactel.cz/Mandrakelinux/devel/community/i586/media/main
-communityi586:ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/mandrake-devel/community/i586/media/main
-communityi586:rsync://ftp.sunet.se::Mandrakelinux/devel/community/i586/media/main
-communityi586:rsync://mirrors.usc.edu::mandrakelinux/devel/community/i586/media/main
-cookerppc:ftp://ftp-linux.cc.gatech.edu/pub/linux/distributions/mandrake/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/Mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.club-internet.fr/pub/unix/linux/distributions/Mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.gwdg.de/pub/linux/mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.join.uni-muenster.de/pub/linux/distributions/mandrake-devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.nluug.nl/pub/os/Linux/distr/Mandrake/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.sunet.se/pub/Linux/distributions/mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.surfnet.nl/pub/os/Linux/distr/Mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.tugraz.at/mirror/Mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://ftp.uninett.no/pub/unix/Linux/Mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://gd.tuwien.ac.at/pub/linux/Mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://mandrake.contactel.cz/Mandrakelinux/devel/cooker/ppc/media/main
-cookerppc:ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/mandrake-devel/cooker/ppc/media/main
-updatesppc:ftp://ftp-linux.cc.gatech.edu/pub/linux/distributions/mandrake/official/updates/ppc
-updatesppc:ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.club-internet.fr/pub/unix/linux/distributions/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.esat.net/pub/linux/mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.gwdg.de/pub/linux/mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.ikoula.com/pub/ftp.mandrake-linux.com/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.join.uni-muenster.de/pub/linux/distributions/mandrake/updates/ppc
-updatesppc:ftp://ftp.nluug.nl/pub/os/Linux/distr/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.pcds.ch/pub/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.ps.pl/mirrors/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.sunet.se/pub/Linux/distributions/mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.surfnet.nl/pub/os/Linux/distr/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.tugraz.at/mirror/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.uninett.no/pub/unix/Linux/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.uni-bayreuth.de/pub/linux/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://ftp.vat.tu-dresden.de/pub/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://gd.tuwien.ac.at/pub/linux/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://jungle.metalab.unc.edu/pub/Linux/distributions/mandrake/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://linux.cdpa.nsysu.edu.tw/pub/mandrake/updates/ppc
-updatesppc:ftp://mandrake.contactel.cz/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://mandrake.mirrors.pair.com/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://mirrors.secsup.org/pub/linux/mandrake/Mandrakelinux/official/updates/ppc
-updatesppc:ftp://spirit.profinet.sk/mirrors/Mandrake/updates/ppc
-updatesppc:ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/mandrake/updates/ppc
-updatesppc:ftp://updates.roma2.infn.it/linux/updates/mandrake/ppc
-updatesppc:rsync://ftp.sunet.se::Mandrakelinux/official/updates/ppc
-updatesppc:rsync://mirrors.usc.edu::mandrakelinux/official/updates/ppc
-cookerx86_64:ftp://ftp-linux.cc.gatech.edu/pub/linux/distributions/mandrake/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/Mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.club-internet.fr/pub/unix/linux/distributions/Mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.gwdg.de/pub/linux/mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.join.uni-muenster.de/pub/linux/distributions/mandrake-devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.nluug.nl/pub/os/Linux/distr/Mandrake/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.proxad.net/pub/Distributions_Linux/Mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.sunet.se/pub/Linux/distributions/mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.surfnet.nl/pub/os/Linux/distr/Mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.tugraz.at/mirror/Mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://ftp.uninett.no/pub/unix/Linux/Mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://gd.tuwien.ac.at/pub/linux/Mandrakelinux/devel/cooker/x86_64/media/main
-cookerx86_64:ftp://mandrake.contactel.cz/Mandrakelinux/devel/cooker/x86_64/media/main
-cookeri586:ftp://anorien.csc.warwick.ac.uk/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://bo.mirror.garr.it/pub/mirrors/Mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://carroll.cac.psu.edu/pub/linux/distributions/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://fr2.rpmfind.net/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.ale.org/pub/mirrors/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.aso.ee/pub/Mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.belnet.be/packages/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.bylinux.net/pub/mirror/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.cica.es/pub/Linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.ciril.fr/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.cise.ufl.edu/pub/mirrors/mandrake/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.cs.ucr.edu/pub/mirrors/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.esat.net/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.fh-wolfenbuettel.de/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.fi.muni.cz/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.free.fr/mirrors/ftp.mandrake-linux.com/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.gtlib.cc.gatech.edu/pub/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.gwdg.de/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.heanet.ie/pub/mandrake/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.icm.edu.pl/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.int-evry.fr/pub/linux/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.isu.edu.tw/pub/Linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.isu.net.sa/pub/mirrors/ftp.mandrake.com/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.join.uni-muenster.de/pub/linux/distributions/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.kddlabs.co.jp/Linux/packages/Mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.linux.cz/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.lip6.fr/pub/linux/distributions/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.mandrake.ikoula.com/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.mirrorservice.org/pub/Mandrake_Linux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.nara.wide.ad.jp/pub/Linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.ndlug.nd.edu/pub/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.neva.ru/Linux-Distrib/Mandrake/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.nluug.nl/pub/os/Linux/distr/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.ntua.gr/pub/linux/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.phys.ttu.edu/pub/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.physics.auth.gr/pub/mirrors/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.planetmirror.com/pub/Mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.prew.hu/pub/Linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.ps.pl/mirrors/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.rediris.es/pub/linux/distributions/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.riken.go.jp/pub/Linux/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.sun.ac.za/pub/linux/mandrake/pub/Linux/distributions/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.sunet.se/pub/Linux/distributions/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.sunsite.org.uk/package/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.surfnet.nl/pub/os/Linux/distr/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.tu-chemnitz.de/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.tuniv.szczecin.pl/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.u-strasbg.fr/pub/linux/distributions/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.uasw.edu/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.uio.no/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.uni-bayreuth.de/pub/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.uni-wuppertal.de/pub/linux/mandrake/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.uninett.no/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp.vat.tu-dresden.de/pub/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://ftp3.mandrake.sk/mirrors/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://gd.tuwien.ac.at/pub/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://helios.dii.utk.edu/pub/linux/Mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://mandrake.contactel.cz/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mandrake.mirrors.pair.com/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mdk.linux.org.tw/pub/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.aca.oakland.edu/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.averse.net/pub/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.cs.wisc.edu/pub/mirrors/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.etf.bg.ac.yu/distributions/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.fis.unb.br/pub/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.pacific.net.au/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.switch.ch/mirror/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.umr.edu/pub/linux/mandrake/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirror.usu.edu/mirrors/Mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://mirrors.secsup.org/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://mirrors.xmission.com/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://ramses.wh2.tu-dresden.de/pub/mirrors/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://raven.cslab.vt.edu/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://sunsite.cnlab-switch.ch/mirror/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://sunsite.icm.edu.pl/pub/Linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://sunsite.mff.cuni.cz/OS/Linux/Dist/Mandrake/mandrake/devel/cooker/i586/media/main
-cookeri586:ftp://tux.cprm.net/pub/Mandrake/devel/cooker/i586/media/main
-cookeri586:http://anorien.csc.warwick.ac.uk/mirrors/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://fr2.rpmfind.net/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://ftp.ale.org/pub/mirrors/mandrake/devel/cooker/i586/media/main
-cookeri586:http://ftp.heanet.ie/pub/mandrake/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://ftp.nluug.nl/ftp/pub/os/Linux/distr/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://ftp.rediris.es/pub/linux/distributions/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://ftp.riken.go.jp/Linux/mandrake/devel/cooker/i586/media/main
-cookeri586:http://ftp.surfnet.nl/ftp/pub/os/Linux/distr/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://gd.tuwien.ac.at/pub/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://gulus.usherbrooke.ca/pub/distro/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://mandrake.mirrors.pair.com/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://mirror.hamakor.org.il/pub/mirrors/mandrake/devel/cooker/i586/media/main
-cookeri586:http://mirror.pacific.net.au/linux/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://mirror.umr.edu/pub/linux/mandrake/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:http://wftp.tu-chemnitz.de/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:rsync://carroll.cac.psu.edu/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:rsync://ftp.fi.muni.cz/pub/linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:rsync://ftp.join.uni-muenster.de/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:rsync://ftp.nluug.nl/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:rsync://ftp.riken.go.jp/mandrake/devel/cooker/i586/media/main
-cookeri586:rsync://ftp.surfnet.nl/Mandrakelinux/devel/cooker/i586/media/main
-cookeri586:rsync://mirror.umr.edu/mandrake/devel/cooker/i586/media/main
-cookeri586:rsync://rsync.mirrorservice.org/sunsite.uio.no/pub/unix/Linux/mandrakelinux/devel/cooker/i586/media/main
-cookeri586:rsync://rsync.uni-bayreuth.de/Mandrakelinux/devel/cooker/i586/media/main
-updatesi586:ftp://anorien.csc.warwick.ac.uk/Mandrakelinux/official/updates
-updatesi586:ftp://bo.mirror.garr.it/pub/mirrors/Mandrake/official/updates
-updatesi586:ftp://carroll.cac.psu.edu/pub/linux/distributions/mandrakelinux/official/updates
-updatesi586:ftp://chronos.iut-bm.univ-fcomte.fr/pub/linux/distributions/Mandrake/official/updates
-updatesi586:ftp://distro.ibiblio.org/pub/Linux/distributions/mandrake/Mandrakelinux/official/updates
-updatesi586:ftp://fr2.rpmfind.net/linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.ale.org/pub/mirrors/mandrake/official/updates
-updatesi586:ftp://ftp.aso.ee/pub/Mandrake/official/updates
-updatesi586:ftp://ftp.belnet.be/packages/mandrakelinux/official/updates
-updatesi586:ftp://ftp.cica.es/pub/Linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.ciril.fr/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.cise.ufl.edu/pub/mirrors/mandrake/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.cru.fr/pub/linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.cs.ucr.edu/pub/mirrors/mandrakelinux/official/updates
-updatesi586:ftp://ftp.cse.buffalo.edu/pub/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.ens-cachan.fr/pub/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.esat.net/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.fh-wolfenbuettel.de/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.free.fr/mirrors/ftp.mandrake-linux.com/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.fsn.hu/pub/linux/distributions/mandrake/official/updates
-updatesi586:ftp://ftp.gtlib.cc.gatech.edu/pub/mandrake/official/updates
-updatesi586:ftp://ftp.gwdg.de/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.heanet.ie/pub/mandrake/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.iasi.roedu.net/mirrors/ftp.mandrake.com/official/updates
-updatesi586:ftp://ftp.icm.edu.pl/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.int-evry.fr/pub/linux/mandrake/official/updates
-updatesi586:ftp://ftp.isu.edu.tw/pub/Linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.isu.net.sa/pub/mirrors/ftp.mandrake.com/mandrakelinux/official/updates
-updatesi586:ftp://ftp.join.uni-muenster.de/pub/linux/distributions/mandrakelinux/official/updates
-updatesi586:ftp://ftp.kddlabs.co.jp/Linux/packages/Mandrake/official/updates
-updatesi586:ftp://ftp.linux.cz/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.lip6.fr/pub/linux/distributions/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.mandrake.ikoula.com/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.mirror.ac.uk/sites/sunsite.uio.no/ftp/linux/mdl/official/updates
-updatesi586:ftp://ftp.mirrorservice.org/pub/Mandrake_Linux/official/updates
-updatesi586:ftp://ftp.mki.fh-duesseldorf.de/Mirror/Mandrake/official/updates
-updatesi586:ftp://ftp.nara.wide.ad.jp/pub/Linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.ndlug.nd.edu/pub/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.nectec.or.th/pub/linux-distributions/Mandrake/official/updates
-updatesi586:ftp://ftp.neva.ru/Linux-Distrib/Mandrake/mandrakelinux/official/updates
-updatesi586:ftp://ftp.nluug.nl/pub/os/Linux/distr/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.ntua.gr/pub/linux/mandrake/official/updates
-updatesi586:ftp://ftp.phys.ttu.edu/pub/mandrakelinux/official/updates
-updatesi586:ftp://ftp.physics.auth.gr/pub/mirrors/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.prew.hu/pub/Linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.ps.pl/mirrors/mandrake/official/updates
-updatesi586:ftp://ftp.rediris.es/pub/linux/distributions/mandrakelinux/official/updates
-updatesi586:ftp://ftp.riken.go.jp/pub/Linux/mandrake/official/updates
-updatesi586:ftp://ftp.song.fi/pub/mirrors/Mandrake-linux/official/updates
-updatesi586:ftp://ftp.sun.ac.za/pub/linux/mandrake/pub/Linux/distributions/official/updates
-updatesi586:ftp://ftp.sunet.se/pub/Linux/distributions/mandrakelinux/official/updates
-updatesi586:ftp://ftp.sunsite.org.uk/package/mandrakelinux/official/updates
-updatesi586:ftp://ftp.surfnet.nl/pub/os/Linux/distr/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.task.gda.pl/pub/linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.tu-chemnitz.de/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.tuniv.szczecin.pl/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.u-strasbg.fr/pub/linux/distributions/mandrakelinux/official/updates
-updatesi586:ftp://ftp.uasw.edu/linux/mandrakelinux/official/updates
-updatesi586:ftp://ftp.uio.no/linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.uni-bayreuth.de/pub/linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.unicamp.br/pub/mandrakelinux/official/updates
-updatesi586:ftp://ftp.uninett.no/linux/Mandrakelinux/official/updates
-updatesi586:ftp://ftp.univ-lille1.fr/pub/os/linux/distributions/mandrakelinux/official/updates
-updatesi586:ftp://ftp.uvsq.fr/pub/mandrake/official/updates
-updatesi586:ftp://ftp.uwsg.indiana.edu/linux/mandrake/official/updates
-updatesi586:ftp://ftp.vat.tu-dresden.de/pub/Mandrakelinux/official/updates
-updatesi586:ftp://ftp3.mandrake.sk/mirrors/Mandrakelinux/official/updates
-updatesi586:ftp://gd.tuwien.ac.at/pub/linux/Mandrakelinux/official/updates
-updatesi586:ftp://helios.dii.utk.edu/pub/linux/Mandrake/official/updates
-updatesi586:ftp://mandrake.contactel.cz/Mandrakelinux/official/updates
-updatesi586:ftp://mandrake.mirrors.pair.com/Mandrakelinux/official/updates
-updatesi586:ftp://mdk.linux.org.tw/pub/mandrakelinux/official/updates
-updatesi586:ftp://mirror.aca.oakland.edu/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://mirror.averse.net/pub/Mandrakelinux/official/updates
-updatesi586:ftp://mirror.cs.wisc.edu/pub/mirrors/linux/Mandrakelinux/official/updates
-updatesi586:ftp://mirror.etf.bg.ac.yu/distributions/Mandrakelinux/official/updates
-updatesi586:ftp://mirror.fis.unb.br/pub/linux/Mandrakelinux/official/updates
-updatesi586:ftp://mirror.inspire.net.nz/mandrake//official/updates
-updatesi586:ftp://mirror.pacific.net.au/linux/Mandrakelinux/official/updates
-updatesi586:ftp://mirror.switch.ch/mirror/mandrake/official/updates
-updatesi586:ftp://mirror.umr.edu/pub/linux/mandrake/Mandrakelinux/official/updates
-updatesi586:ftp://mirror.usu.edu/mirrors/Mandrake/official/updates
-updatesi586:ftp://mirrors.dotsrc.org/mandrake/official/updates
-updatesi586:ftp://mirrors.ptd.net/mandrake/official/updates
-updatesi586:ftp://mirrors.secsup.org/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates
-updatesi586:ftp://mirrors.xmission.com/mandrake/official/updates
-updatesi586:ftp://ramses.wh2.tu-dresden.de/pub/mirrors/mandrake/official/updates
-updatesi586:ftp://raven.cslab.vt.edu/pub/linux/mandrakelinux/official/updates
-updatesi586:ftp://sunsite.cnlab-switch.ch/mirror/mandrake/official/updates
-updatesi586:ftp://sunsite.icm.edu.pl/pub/Linux/mandrakelinux/official/updates
-updatesi586:ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/mandrake/official/updates
-updatesi586:ftp://sunsite.mff.cuni.cz/OS/Linux/Dist/Mandrake/mandrake/official/updates
-updatesi586:ftp://tux.cprm.net/pub/Mandrake/official/updates
-updatesi586:http://anorien.csc.warwick.ac.uk/mirrors/Mandrakelinux/official/updates
-updatesi586:http://distro.ibiblio.org/pub/Linux/distributions/mandrake/Mandrakelinux/official/updates
-updatesi586:http://fr2.rpmfind.net/linux/Mandrakelinux/official/updates
-updatesi586:http://ftp.ale.org/pub/mirrors/mandrake/official/updates
-updatesi586:http://ftp.club-internet.fr/pub/linux/Mandrakelinux/official/updates
-updatesi586:http://ftp.esat.net/pub/linux/mandrakelinux/official/updates
-updatesi586:http://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/updates
-updatesi586:http://ftp.heanet.ie/pub/mandrake/Mandrakelinux/official/updates
-updatesi586:http://ftp.iasi.roedu.net/mirrors/ftp.mandrake.com/official/updates
-updatesi586:http://ftp.isu.edu.tw/pub/Linux/Mandrakelinux/official/updates
-updatesi586:http://ftp.isu.net.sa/pub/mirrors/ftp.mandrake.com/mandrakelinux/official/updates
-updatesi586:http://ftp.kddlabs.co.jp/Linux/distributions/Mandrake/official/updates
-updatesi586:http://ftp.nluug.nl/ftp/pub/os/Linux/distr/Mandrakelinux/official/updates
-updatesi586:http://ftp.rediris.es/pub/linux/distributions/mandrakelinux/official/updates
-updatesi586:http://ftp.riken.go.jp/Linux/mandrake/official/updates
-updatesi586:http://ftp.sun.ac.za/ftp/mirrorsites/mandrakelinux/official/updates
-updatesi586:http://ftp.surfnet.nl/ftp/pub/os/Linux/distr/Mandrakelinux/official/updates
-updatesi586:http://ftpdem.ubi.pt/mandrake/official/updates
-updatesi586:http://gd.tuwien.ac.at/pub/linux/Mandrakelinux/official/updates
-updatesi586:http://gulus.usherbrooke.ca/pub/distro/Mandrakelinux/official/updates
-updatesi586:http://klid.dk/homeftp/mandrakelinux/official/updates
-updatesi586:http://mandrake.mirrors.pair.com/Mandrakelinux/official/updates
-updatesi586:http://mirror.averse.net/pub/Mandrakelinux/official/updates
-updatesi586:http://mirror.etf.bg.ac.yu/distributions/Mandrakelinux/official/updates
-updatesi586:http://mirror.hamakor.org.il/pub/mirrors/mandrake/official/updates
-updatesi586:http://mirror.pacific.net.au/linux/Mandrakelinux/official/updates
-updatesi586:http://mirror.umr.edu/pub/linux/mandrake/Mandrakelinux/official/updates
-updatesi586:http://mirror.usu.edu/mirrors/Mandrake/official/updates
-updatesi586:http://mirrors.dotsrc.org/mandrake/official/updates
-updatesi586:http://sunsite.icm.edu.pl/pub/Linux/mandrakelinux/official/updates
-updatesi586:http://wftp.tu-chemnitz.de/pub/linux/mandrakelinux/official/updates
-updatesi586:http://www.gtlib.cc.gatech.edu/pub/mandrake/official/updates
-updatesi586:http://www.mirror.ac.uk/sites/sunsite.uio.no/ftp/linux/mdl/official/updates
-updatesi586:http://www.sunsite.org.uk/package/mandrakelinux/official/updates
-updatesi586:rsync://carroll.cac.psu.edu/mandrakelinux/official/updates
-updatesi586:rsync://distro.ibiblio.org/distros/mandrake/Mandrakelinux/official/updates
-updatesi586:rsync://ftp.esat.net/ftp/pub/linux/mandrakelinux/official/updates
-updatesi586:rsync://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/updates
-updatesi586:rsync://ftp.iasi.roedu.net/mandrake.com/official/updates
-updatesi586:rsync://ftp.join.uni-muenster.de/mandrakelinux/official/updates
-updatesi586:rsync://ftp.nluug.nl/Mandrakelinux/official/updates
-updatesi586:rsync://ftp.riken.go.jp/mandrake/official/updates
-updatesi586:rsync://ftp.surfnet.nl/Mandrakelinux/official/updates
-updatesi586:rsync://mirror.umr.edu/mandrake/official/updates
-updatesi586:rsync://rsync.gtlib.cc.gatech.edu/mandrake/official/updates
-updatesi586:rsync://rsync.mirrorservice.org/sunsite.uio.no/pub/unix/Linux/mandrakelinux/official/updates
-updatesi586:rsync://rsync.uni-bayreuth.de/Mandrakelinux/official/updates
-officiali586:ftp://anorien.csc.warwick.ac.uk/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://bo.mirror.garr.it/pub/mirrors/Mandrake/official/10.1/i586/media/main/
-officiali586:ftp://chronos.iut-bm.univ-fcomte.fr/pub/linux/distributions/Mandrake/official/10.1/i586/media/main/
-officiali586:ftp://distro.ibiblio.org/pub/Linux/distributions/mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://fr2.rpmfind.net/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.ale.org/pub/mirrors/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.aso.ee/pub/Mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.belnet.be/packages/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.cica.es/pub/Linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.ciril.fr/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.cru.fr/pub/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.cs.ucr.edu/pub/mirrors/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.cse.buffalo.edu/pub/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.ens-cachan.fr/pub/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.esat.net/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.fh-giessen.de/pub/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.fh-wolfenbuettel.de/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.free.fr/mirrors/ftp.mandrake-linux.com/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.fsn.hu/pub/linux/distributions/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.gtlib.cc.gatech.edu/pub/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.gwdg.de/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.heanet.ie/pub/mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.iasi.roedu.net/mirrors/ftp.mandrake.com/official/10.1/i586/media/main/
-officiali586:ftp://ftp.icm.edu.pl/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.informatik.hu-berlin.de/pub/Linux/Distributions/Mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.int-evry.fr/pub/linux/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.isu.edu.tw/pub/Linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.isu.net.sa/pub/mirrors/ftp.mandrake.com/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.kddlabs.co.jp/Linux/packages/Mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.linux.cz/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.lip6.fr/pub/linux/distributions/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.mandrake.ikoula.com/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.mirror.ac.uk/sites/sunsite.uio.no/ftp/linux/mdl/official/10.1/i586/media/main/
-officiali586:ftp://ftp.mirrorservice.org/pub/Mandrake_Linux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.mki.fh-duesseldorf.de/Mirror/Mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.nara.wide.ad.jp/pub/Linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.ndlug.nd.edu/pub/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.neva.ru/Linux-Distrib/Mandrake/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.nluug.nl/pub/os/Linux/distr/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.ntua.gr/pub/linux/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.phys.ttu.edu/pub/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.physics.auth.gr/pub/mirrors/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.prew.hu/pub/Linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.ps.pl/mirrors/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.rediris.es/pub/linux/distributions/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.riken.go.jp/pub/Linux/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.song.fi/pub/mirrors/Mandrake-linux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.sun.ac.za/pub/linux/mandrake/pub/Linux/distributions/official/10.1/i586/media/main/
-officiali586:ftp://ftp.sunet.se/pub/Linux/distributions/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.sunsite.org.uk/package/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.surfnet.nl/pub/os/Linux/distr/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.tu-chemnitz.de/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.tuniv.szczecin.pl/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.u-strasbg.fr/pub/linux/distributions/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.uasw.edu/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.uio.no/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.uni-bayreuth.de/pub/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.uni-wuppertal.de/pub/linux/mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.unicamp.br/pub/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.uninett.no/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://ftp.uvsq.fr/pub/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.uwsg.indiana.edu/linux/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ftp.vat.tu-dresden.de/pub/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://gd.tuwien.ac.at/pub/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://linux.ntcu.net/dists/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://linux.ups-tlse.fr/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mandrake.contactel.cz/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mandrake.mirrors.pair.com/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mdk.linux.org.tw/pub/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mirror.averse.net/pub/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mirror.cs.wisc.edu/pub/mirrors/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mirror.etf.bg.ac.yu/distributions/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mirror.fis.unb.br/pub/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mirror.inspire.net.nz/mandrake//official/10.1/i586/media/main/
-officiali586:ftp://mirror.pacific.net.au/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mirror.switch.ch/mirror/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://mirror.umr.edu/pub/linux/mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mirror.usu.edu/mirrors/Mandrake/official/10.1/i586/media/main/
-officiali586:ftp://mirrors.dotsrc.org/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://mirrors.ptd.net/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://mirrors.secsup.org/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://mirrors.xmission.com/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://ramses.wh2.tu-dresden.de/pub/mirrors/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://sunsite.cnlab-switch.ch/mirror/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://sunsite.icm.edu.pl/pub/Linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/mandrake/official/10.1/i586/media/main/
-officiali586:ftp://sunsite.mff.cuni.cz/OS/Linux/Dist/Mandrake/mandrake/official/10.1/i586/media/main/
-officiali586:http://anorien.csc.warwick.ac.uk/mirrors/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://distro.ibiblio.org/pub/Linux/distributions/mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://fr2.rpmfind.net/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.ale.org/pub/mirrors/mandrake/official/10.1/i586/media/main/
-officiali586:http://ftp.club-internet.fr/pub/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.esat.net/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.heanet.ie/pub/mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.iasi.roedu.net/mirrors/ftp.mandrake.com/official/10.1/i586/media/main/
-officiali586:http://ftp.isu.edu.tw/pub/Linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.kddlabs.co.jp/Linux/distributions/Mandrake/official/10.1/i586/media/main/
-officiali586:http://ftp.nluug.nl/ftp/pub/os/Linux/distr/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.rediris.es/pub/linux/distributions/mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.riken.go.jp/Linux/mandrake/official/10.1/i586/media/main/
-officiali586:http://ftp.sun.ac.za/ftp/mirrorsites/mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://ftp.surfnet.nl/ftp/pub/os/Linux/distr/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://gd.tuwien.ac.at/pub/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://gulus.usherbrooke.ca/pub/distro/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://klid.dk/homeftp/mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://mandrake.mirrors.pair.com/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://mirror.averse.net/pub/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://mirror.etf.bg.ac.yu/distributions/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://mirror.hamakor.org.il/pub/mirrors/mandrake/official/10.1/i586/media/main/
-officiali586:http://mirror.pacific.net.au/linux/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://mirror.umr.edu/pub/linux/mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://mirror.usu.edu/mirrors/Mandrake/official/10.1/i586/media/main/
-officiali586:http://mirrors.dotsrc.org/mandrake/official/10.1/i586/media/main/
-officiali586:http://sunsite.icm.edu.pl/pub/Linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://wftp.tu-chemnitz.de/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:http://www.gtlib.cc.gatech.edu/pub/mandrake/official/10.1/i586/media/main/
-officiali586:http://www.mirror.ac.uk/sites/sunsite.uio.no/ftp/linux/mdl/official/10.1/i586/media/main/
-officiali586:http://www.sunsite.org.uk/package/mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://carroll.cac.psu.edu/mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://distro.ibiblio.org/distros/mandrake/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://ftp.esat.net/ftp/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://ftp.iasi.roedu.net/mandrake.com/official/10.1/i586/media/main/
-officiali586:rsync://ftp.join.uni-muenster.de/mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://ftp.nluug.nl/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://ftp.riken.go.jp/mandrake/official/10.1/i586/media/main/
-officiali586:rsync://ftp.surfnet.nl/Mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://mirror.umr.edu/mandrake/official/10.1/i586/media/main/
-officiali586:rsync://rsync.gtlib.cc.gatech.edu/mandrake/official/10.1/i586/media/main/
-officiali586:rsync://rsync.mirrorservice.org/sunsite.uio.no/pub/unix/Linux/mandrakelinux/official/10.1/i586/media/main/
-officiali586:rsync://rsync.uni-bayreuth.de/Mandrakelinux/official/10.1/i586/media/main/
-updatesx86_64:ftp://anorien.csc.warwick.ac.uk/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://bo.mirror.garr.it/pub/mirrors/Mandrake/official/updates/x86_64
-updatesx86_64:ftp://carroll.cac.psu.edu/pub/linux/distributions/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://distro.ibiblio.org/pub/Linux/distributions/mandrake/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://fr2.rpmfind.net/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.ale.org/pub/mirrors/mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.aso.ee/pub/Mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.belnet.be/packages/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.cica.es/pub/Linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.ciril.fr/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.cru.fr/pub/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.cs.ucr.edu/pub/mirrors/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.cse.buffalo.edu/pub/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.ens-cachan.fr/pub/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.esat.net/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.fh-wolfenbuettel.de/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.free.fr/mirrors/ftp.mandrake-linux.com/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.fsn.hu/pub/linux/distributions/mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.gtlib.cc.gatech.edu/pub/mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.gwdg.de/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.heanet.ie/pub/mandrake/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.icm.edu.pl/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.isu.edu.tw/pub/Linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.isu.net.sa/pub/mirrors/ftp.mandrake.com/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.join.uni-muenster.de/pub/linux/distributions/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.kddlabs.co.jp/Linux/packages/Mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.linux.cz/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.lip6.fr/pub/linux/distributions/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.mandrake.ikoula.com/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.mirror.ac.uk/sites/sunsite.uio.no/ftp/linux/mdl/official/updates/x86_64
-updatesx86_64:ftp://ftp.mirrorservice.org/pub/Mandrake_Linux/official/updates/x86_64
-updatesx86_64:ftp://ftp.nara.wide.ad.jp/pub/Linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.ndlug.nd.edu/pub/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.nectec.or.th/pub/linux-distributions/Mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.nluug.nl/pub/os/Linux/distr/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.phys.ttu.edu/pub/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.physics.auth.gr/pub/mirrors/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.ps.pl/mirrors/mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.rediris.es/pub/linux/distributions/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.riken.go.jp/pub/Linux/mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.sunet.se/pub/Linux/distributions/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.sunsite.org.uk/package/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.surfnet.nl/pub/os/Linux/distr/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.task.gda.pl/pub/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.tu-chemnitz.de/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.tuniv.szczecin.pl/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.uasw.edu/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.uio.no/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.uni-bayreuth.de/pub/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.uninett.no/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.univ-lille1.fr/pub/os/linux/distributions/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://ftp.uwsg.indiana.edu/linux/mandrake/official/updates/x86_64
-updatesx86_64:ftp://ftp.vat.tu-dresden.de/pub/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://gd.tuwien.ac.at/pub/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://helios.dii.utk.edu/pub/linux/Mandrake/official/updates/x86_64
-updatesx86_64:ftp://mandrake.contactel.cz/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mandrake.mirrors.pair.com/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mdk.linux.org.tw/pub/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirror.averse.net/pub/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirror.cs.wisc.edu/pub/mirrors/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirror.etf.bg.ac.yu/distributions/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirror.fis.unb.br/pub/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirror.inspire.net.nz/mandrake//official/updates/x86_64
-updatesx86_64:ftp://mirror.pacific.net.au/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirror.switch.ch/mirror/mandrake/official/updates/x86_64
-updatesx86_64:ftp://mirror.umr.edu/pub/linux/mandrake/Mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirror.usu.edu/mirrors/Mandrake/official/updates/x86_64
-updatesx86_64:ftp://mirrors.dotsrc.org/mandrake/official/updates/x86_64
-updatesx86_64:ftp://mirrors.ptd.net/mandrake/official/updates/x86_64
-updatesx86_64:ftp://mirrors.secsup.org/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirrors.usc.edu/pub/linux/distributions/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://mirrors.xmission.com/mandrake/official/updates/x86_64
-updatesx86_64:ftp://ramses.wh2.tu-dresden.de/pub/mirrors/mandrake/official/updates/x86_64
-updatesx86_64:ftp://raven.cslab.vt.edu/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://sunsite.cnlab-switch.ch/mirror/mandrake/official/updates/x86_64
-updatesx86_64:ftp://sunsite.icm.edu.pl/pub/Linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/mandrake/official/updates/x86_64
-updatesx86_64:ftp://sunsite.mff.cuni.cz/OS/Linux/Dist/Mandrake/mandrake/official/updates/x86_64
-updatesx86_64:http://anorien.csc.warwick.ac.uk/mirrors/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://distro.ibiblio.org/pub/Linux/distributions/mandrake/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://fr2.rpmfind.net/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.ale.org/pub/mirrors/mandrake/official/updates/x86_64
-updatesx86_64:http://ftp.club-internet.fr/pub/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.esat.net/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.heanet.ie/pub/mandrake/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.isu.edu.tw/pub/Linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.isu.net.sa/pub/mirrors/ftp.mandrake.com/mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.kddlabs.co.jp/Linux/distributions/Mandrake/official/updates/x86_64
-updatesx86_64:http://ftp.nluug.nl/ftp/pub/os/Linux/distr/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.rediris.es/pub/linux/distributions/mandrakelinux/official/updates/x86_64
-updatesx86_64:http://ftp.riken.go.jp/Linux/mandrake/official/updates/x86_64
-updatesx86_64:http://ftp.surfnet.nl/ftp/pub/os/Linux/distr/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://gd.tuwien.ac.at/pub/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://gulus.usherbrooke.ca/pub/distro/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://klid.dk/homeftp/mandrakelinux/official/updates/x86_64
-updatesx86_64:http://mandrake.mirrors.pair.com/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://mirror.averse.net/pub/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://mirror.etf.bg.ac.yu/distributions/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://mirror.pacific.net.au/linux/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://mirror.umr.edu/pub/linux/mandrake/Mandrakelinux/official/updates/x86_64
-updatesx86_64:http://mirror.usu.edu/mirrors/Mandrake/official/updates/x86_64
-updatesx86_64:http://mirrors.dotsrc.org/mandrake/official/updates/x86_64
-updatesx86_64:http://sunsite.icm.edu.pl/pub/Linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:http://wftp.tu-chemnitz.de/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:http://www.gtlib.cc.gatech.edu/pub/mandrake/official/updates/x86_64
-updatesx86_64:http://www.mirror.ac.uk/sites/sunsite.uio.no/ftp/linux/mdl/official/updates/x86_64
-updatesx86_64:http://www.sunsite.org.uk/package/mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://carroll.cac.psu.edu/mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://distro.ibiblio.org/distros/mandrake/Mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://ftp.esat.net/ftp/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://ftp.fi.muni.cz/pub/linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://ftp.join.uni-muenster.de/mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://ftp.nluug.nl/Mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://ftp.riken.go.jp/mandrake/official/updates/x86_64
-updatesx86_64:rsync://ftp.surfnet.nl/Mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://mirror.umr.edu/mandrake/official/updates/x86_64
-updatesx86_64:rsync://rsync.gtlib.cc.gatech.edu/mandrake/official/updates/x86_64
-updatesx86_64:rsync://rsync.mirrorservice.org/sunsite.uio.no/pub/unix/Linux/mandrakelinux/official/updates/x86_64
-updatesx86_64:rsync://rsync.uni-bayreuth.de/Mandrakelinux/official/updates/x86_64
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
deleted file mode 100644
index e689ff7e5..000000000
--- a/perl-install/detect_devices.pm
+++ /dev/null
@@ -1,1005 +0,0 @@
-package detect_devices; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($pcitable_addons $usbtable_addons);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use log;
-use common;
-use devices;
-use run_program;
-use modules;
-use c;
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-my %serialprobe;
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub dev_is_devfs() { -e "/dev/.devfsd" } #- no $::prefix, returns false during install and that's nice :)
-
-
-sub get() {
-    #- Detect the default BIOS boot harddrive is kind of tricky. We may have IDE,
-    #- SCSI and RAID devices on the same machine. From what I see so far, the default
-    #- BIOS boot harddrive will be
-    #- 1. The first IDE device if IDE exists. Or
-    #- 2. The first SCSI device if SCSI exists. Or
-    #- 3. The first RAID device if RAID exists.
-
-    getIDE(), getSCSI(), getDAC960(), getCompaqSmartArray(), getATARAID();
-}
-sub hds()         { grep { may_be_a_hd($_) } get() }
-sub tapes()       { grep { $_->{media_type} eq 'tape' } get() }
-sub cdroms()      { grep { $_->{media_type} eq 'cdrom' } get() }
-sub burners()     { grep { isBurner($_) } cdroms() }
-sub dvdroms()     { grep { isDvdDrive($_) } cdroms() }
-sub raw_zips()    { grep { member($_->{media_type}, 'fd', 'hd') && isZipDrive($_) } get() }
-#-sub jazzs     { grep { member($_->{media_type}, 'fd', 'hd') && isJazzDrive($_) } get() }
-sub ls120s()      { grep { member($_->{media_type}, 'fd', 'hd') && isLS120Drive($_) } get() }
-sub zips()        {
-    map { 
-	$_->{device} .= 4; 
-	$_->{devfs_device} = $_->{devfs_prefix} . '/part4'; 
-	$_;
-    } raw_zips();
-}
-
-sub floppies() {
-    require modules;
-    my @fds;
-    eval { modules::load("floppy") if $::isInstall };
-    if (!is_xbox()) {
-        @fds = map {
-            my $info = (!dev_is_devfs() || -e "/dev/fd$_") && c::floppy_info(devices::make("fd$_"));
-            if_($info && $info ne '(null)', { device => "fd$_", devfs_device => "floppy/$_", media_type => 'fd', info => $info });
-        } qw(0 1);
-    }
-        
-    my @ide = ls120s() and eval { modules::load("ide-floppy") };
-
-    eval { modules::load("usb-storage") } if usbStorage();
-    my @scsi = grep { $_->{media_type} eq 'fd' } getSCSI();
-    @ide, @scsi, @fds;
-}
-sub floppies_dev() { map { $_->{device} } floppies() }
-sub floppy() { first(floppies_dev()) }
-#- example ls120, model = "LS-120 SLIM 02 UHD Floppy"
-
-sub removables() {
-    floppies(), cdroms(), zips();
-}
-
-sub get_sys_cdrom_info {
-    my (@drives) = @_;
-
-    my @drives_order;
-    foreach (cat_("/proc/sys/dev/cdrom/info")) {
-	my ($t, $l) = split ':';
-	my @l;
-	@l = split(' ', $l) if $l;
-	if ($t eq 'drive name') {
-	    @drives_order = map {
-		my $dev = $_;
-		find { $_->{device} eq $dev } @drives;
-	    } @l;
-	} else {
-	    my $capacity;
-	    if ($t eq 'Can write CD-R') {
-		$capacity = 'burner';
-	    } elsif ($t eq 'Can read DVD') {
-		$capacity = 'DVD';
-	    }
-	    if ($capacity) {
-		each_index {
-		    ($drives_order[$::i] || {})->{capacity} .= "$capacity " if $_;
-		} @l;
-	    }
-	}
-    }
-}
-
-sub get_usb_storage_info_24 {
-    my (@l) = @_;
-
-    my %usbs = map {
-	my $s = cat_(glob_("$_/*"));
-	my ($host) = $s =~ /^\s*Host scsi(\d+):/m; #-#
-	my ($vendor_name) = $s =~ /^\s*Vendor: (.*)/m;
-	my ($vendor, $id) = $s =~ /^\s*GUID: (....)(....)/m;
-	if_(defined $host, $host => { vendor_name => $vendor_name, usb_vendor => hex $vendor, usb_id => hex $id });
-    } glob_('/proc/scsi/usb-storage-*') or return;
-
-    #- only the entries matching the following conditions can be usb-storage devices
-    @l = grep { $_->{channel} == 0 && $_->{id} == 0 && $_->{lun} == 0 } @l;
-    my %l; push @{$l{$_->{host}}}, $_ foreach @l;
-
-    foreach my $host (keys %usbs) {
-	my @choices = @{$l{$host} || []} or log::l("weird, host$host from /proc/scsi/usb-storage-*/* is not in /proc/scsi/scsi"), next;
-	if (@choices > 1) {
-	    @choices = grep { $_->{info} =~ /^\Q$usbs{$host}{vendor_name}/ } @choices;
-	    @choices or log::l("weird, can not find the good entry host$host from /proc/scsi/usb-storage-*/* in /proc/scsi/scsi"), next;
-	    @choices == 1 or log::l("argh, can not determine the good entry host$host from /proc/scsi/usb-storage-*/* in /proc/scsi/scsi"), next;
-	}
-	add2hash($choices[0], $usbs{$host});
-    }
-    complete_usb_storage_info(@l);
-
-    @l;
-}
-
-sub complete_usb_storage_info {
-    my (@l) = @_;
-
-    my @usb = grep { exists $_->{usb_vendor} } @l;
-
-    foreach my $usb (usb_probe()) {
-	if (my $e = find { $_->{usb_vendor} == $usb->{vendor} && $_->{usb_id} == $usb->{id} } @usb) {
-	    $e->{"usb_$_"} = $usb->{$_} foreach keys %$usb;
-	}
-    }
-}
-
-sub get_devfs_devices {
-    my (@l) = @_;
-
-    my %h = (cdrom => 'cd', hd => 'disc');
-
-    foreach (@l) {
-	$_->{devfs_prefix} = sprintf('scsi/host%d/bus%d/target%d/lun%d', $_->{host}, $_->{channel}, $_->{id}, $_->{lun})
-	  if $_->{bus} eq 'SCSI';
-
-	my $t = $h{$_->{media_type}} or next;
-	$_->{devfs_device} = $_->{devfs_prefix} . '/' . $t;
-    }
-}
-
-sub isBurner { 
-    my ($e) = @_;
-    $e->{capacity} =~ /burner/ and return 1;
-      
-    #- do not work for SCSI
-    my $f = tryOpen($e->{device}); #- SCSI burner are not detected this way.
-    $f && c::isBurner(fileno($f));
-}
-sub isDvdDrive {
-    my ($e) = @_;
-    $e->{capacity} =~ /DVD/ || $e->{info} =~ /DVD/ and return 1;
-
-    #- do not work for SCSI
-    my $f = tryOpen($e->{device});
-    $f && c::isDvdDrive(fileno($f));
-}
-sub isZipDrive { $_[0]{info} =~ /ZIP\s+\d+/ } #- accept ZIP 100, untested for bigger ZIP drive.
-sub isJazzDrive { $_[0]{info} =~ /\bJAZZ?\b/i } #- accept "iomega jaz 1GB"
-sub isLS120Drive { $_[0]{info} =~ /LS-?120|144MB/ }
-sub isRemovableUsb { begins_with($_[0]{usb_media_type} || '', 'Mass Storage') && usb2removable($_[0]) }
-sub isKeyUsb { begins_with($_[0]{usb_media_type} || '', 'Mass Storage') && $_[0]{media_type} eq 'hd' }
-sub isFloppyUsb { $_[0]{usb_driver} && $_[0]{usb_driver} eq 'Removable:floppy' }
-sub may_be_a_hd { 
-    my ($e) = @_;
-    $e->{media_type} eq 'hd' && !(
-	isZipDrive($e) 
-           || isLS120Drive($e)
-           || begins_with($e->{usb_media_type} || '', 'Mass Storage|Floppy (UFI)')
-    );
-}
-
-sub get_scsi_driver {
-    my (@l) = @_;
-    my %host2driver = map { if_(m!.*/(.*)/(.*)!, $2, $1) } glob("/proc/scsi/*/*");
-    foreach (@l) {
-	if (my $driver = $host2driver{$_->{host}}) {
-	    $_->{driver} = $driver;
-	}
-    }
-}
-
-sub getSCSI_24() {
-    my $err = sub { log::l("ERROR: unexpected line in /proc/scsi/scsi: $_[0]") };
-
-    my ($first, @l) = common::join_lines(cat_("/proc/scsi/scsi")) or return;
-    $first =~ /^Attached devices:/ or $err->($first);
-
-    @l = map_index {
-	my ($host, $channel, $id, $lun) = m/^Host: scsi(\d+) Channel: (\d+) Id: (\d+) Lun: (\d+)/ or $err->($_);
-	my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/m or $err->($_);
-	my ($type) = /^\s*Type:\s*(.*)/m or $err->($_);
-	{ info => "$vendor $model", host => $host, channel => $channel, id => $id, lun => $lun, 
-	  device => "sg$::i", raw_type => $type, bus => 'SCSI' };
-    } @l;
-
-    get_usb_storage_info_24(@l);
-
-    each_index {
-	my $dev = "sd" . chr($::i + ord('a'));
-	put_in_hash $_, { device => $dev, media_type => isFloppyUsb($_) ? 'fd' : 'hd' };
-    } grep { $_->{raw_type} =~ /Direct-Access|Optical Device/ } @l;
-
-    each_index {
-	put_in_hash $_, { device => "st$::i", media_type => 'tape' };
-    } grep { $_->{raw_type} =~ /Sequential-Access/ } @l;
-
-    each_index {
-	put_in_hash $_, { device => "sr$::i", media_type => 'cdrom' };
-    } grep { $_->{raw_type} =~ /CD-ROM|WORM/ } @l;
-
-    # Old hp scanners report themselves as "Processor"s
-    # (see linux/include/scsi/scsi.h and sans-find-scanner.1)
-    each_index {
-	put_in_hash $_, { media_type => 'scanner' };
-    } grep { $_->{raw_type} =~ /Scanner/ || $_->{raw_type} =~ /Processor / } @l;
-
-    delete $_->{raw_type} foreach @l;
-
-    get_devfs_devices(@l);
-    get_sys_cdrom_info(@l);
-    get_scsi_driver(@l);
-    @l;
-}
-
-sub getSCSI_26() {
-    my $dev_dir = '/sys/bus/scsi/devices';
-
-    my @scsi_types = (
-	"Direct-Access",
-	"Sequential-Access",
-	"Printer",
-	"Processor",
-	"WORM",
-	"CD-ROM",
-	"Scanner",
-	"Optical Device",
-	"Medium Changer",
-	"Communications",
-    );
-
-    my @l = map {
-	my ($host, $channel, $id, $lun) = split ':' or log::l("bad entry in $dev_dir: $_"), next;
-
-	my $dir = "$dev_dir/$_";
-	my $get = sub {
-	    my $s = cat_("$dir/$_[0]");
-	    $s =~ s/\s+$//;
-	    $s;
-	};
-
-	my $usb_dir = readlink("$dir/block/device") =~ m!/usb! && "$dir/block/device/../../..";
-	my $get_usb = sub { chomp_(cat_("$usb_dir/$_[0]")) };
-
-	my ($device) = readlink("$dir/block") =~ m!/block/(.*)!;
-
-	my $media_type = ${{ st => 'tape', sr => 'cdrom', sd => 'hd' }}{substr($device, 0, 2)};
-	# Old hp scanners report themselves as "Processor"s
-	# (see linux/include/scsi/scsi.h and sans-find-scanner.1)
-	my $raw_type = $scsi_types[$get->('type')];
-	$media_type ||= 'scanner' if $raw_type =~ /Scanner|Processor/;
-
-	{ info =>  $get->('vendor') . ' ' . $get->('model'), host => $host, channel => $channel, id => $id, lun => $lun, 
-	  bus => 'SCSI', media_type => $media_type, device => $device,
-	    $usb_dir ? (
-	  usb_vendor => hex($get_usb->('idVendor')), usb_id => hex($get_usb->('idProduct')),
-	    ) : (),
-        };
-    } all($dev_dir);
-
-    @l = sort { $a->{host} <=> $b->{host} || $a->{channel} <=> $b->{channel} || $a->{id} <=> $b->{id} || $a->{lun} <=> $b->{lun} } @l;
-
-    complete_usb_storage_info(@l);
-
-    foreach (@l) {
-	$_->{media_type} = 'fd' if $_->{media_type} eq 'hd' && isFloppyUsb($_);
-    }
-
-    get_devfs_devices(@l);
-    get_sys_cdrom_info(@l);
-    get_scsi_driver(@l);
-    @l;
-}
-sub getSCSI() { c::kernel_version() =~ /^\Q2.6/ ? getSCSI_26() : getSCSI_24() }
-
-
-my %eide_hds = (
-    "ASUS" => "Asus",
-    "CD-ROM CDU" => "Sony",
-    "CD-ROM Drive/F5D" => "ASUSTeK",
-    "Compaq" => "Compaq",
-    "CONNER" => "Conner Peripherals",
-    "IBM" => "IBM",
-    "FUJITSU" => "Fujitsu",
-    "HITACHI" => "Hitachi",
-    "Lite-On" => "Lite-On Technology Corp.",
-    "LITE-ON" => "Lite-On Technology Corp.",
-    "LTN" => "Lite-On Technology Corp.",
-    "IOMEGA" => "Iomega",
-    "MAXTOR" => "Maxtor",
-    "Maxtor" => "Maxtor",
-    "Micropolis" => "Micropolis",
-    "Pioneer" => "Pioneer",
-    "PLEXTOR" => "Plextor",
-    "QUANTUM" => "Quantum", 
-    "SAMSUNG" => "Samsung",
-    "Seagate " => "Seagate Technology",
-    "ST3" => "Seagate Technology",
-    "TEAC" => "Teac",
-    "TOSHIBA" => "Toshiba",
-    "WDC" => "Western Digital Corp.",
-);
-
-
-sub getIDE() {
-    my @idi;
-
-    #- what about a system with absolutely no IDE on it, like some sparc machine.
-    -e "/proc/ide" or return ();
-
-    #- Great. 2.2 kernel, things are much easier and less error prone.
-    foreach my $d (sort @{[glob_('/proc/ide/hd*')]}) {
-	cat_("$d/driver") =~ /ide-scsi/ and next; #- already appears in /proc/scsi/scsi
-	my $t = chomp_(cat_("$d/media"));
-	my $type = ${{ disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd' }}{$t} or next;
-	my $info = chomp_(cat_("$d/model")) || "(none)";
-
-	my $num = ord(($d =~ /(.)$/)[0]) - ord 'a';
-	my ($vendor, $model) = map { 
-	    if_($info =~ /^$_(-|\s)*(.*)/, $eide_hds{$_}, $2);
-	} keys %eide_hds;
-
-	my $host = $num;
-	($host, my $id) = divide($host, 2);
-	($host, my $channel) = divide($host, 2);
-	my $devfs_prefix = sprintf('ide/host%d/bus%d/target%d/lun0', $host, $channel, $id);
-
-	push @idi, { media_type => $type, device => basename($d), 
-		     devfs_prefix => $devfs_prefix,
-		     info => $info, host => $host, channel => $channel, id => $id, bus => 'ide', 
-		     if_($vendor, Vendor => $vendor), if_($model, Model => $model) };
-    }
-    get_devfs_devices(@idi);
-    get_sys_cdrom_info(@idi);
-    @idi;
-}
-
-sub block_devices() {
-    -d '/sys/block' 
-      ? map { s|!|/|; $_ } all('/sys/block') 
-      : map { $_->{dev} } devices::read_proc_partitions_raw();
-}
-
-sub getCompaqSmartArray() {
-    my (@idi, $f);
-
-    foreach ('array/ida', 'cpqarray/ida', 'cciss/cciss') {
-	my $prefix = "/proc/driver/$_"; #- kernel 2.4 places it here
-	$prefix = "/proc/$_" if !-e "${prefix}0"; #- kernel 2.2
-
-	my ($name) = m|/(.*)|;
-	for (my $i = 0; -r ($f = "${prefix}$i"); $i++) {
-	    my @raw_devices = cat_($f) =~ m|^\s*($name/.*?):|gm;
-	    @raw_devices or @raw_devices = grep { m!^$name/! } block_devices();
-
-	    foreach my $raw_device (@raw_devices) {
-		my $device = -d "/dev/$raw_device" ? "$raw_device/disc" : $raw_device;
-		push @idi, { device => $device, prefix => $raw_device . 'p', 
-			     info => "Compaq RAID logical disk",
-			     media_type => 'hd', bus => $name };
-	    }
-	}
-    }
-    @idi;
-}
-
-sub getDAC960() {
-    my %idi;
-
-    #- We are looking for lines of this format:DAC960#0:
-    #- /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012
-    foreach (syslog()) {
-	my ($device, $info) = m|/dev/(rd/.*?): (.*?),| or next;
-	$idi{$device} = { info => $info, media_type => 'hd', device => $device, prefix => $device . 'p', bus => 'dac960' };
-    }
-    values %idi;
-}
-
-sub getATARAID() {
-    my %l;
-    foreach (syslog()) {
-	my ($device) = m|^\s*(ataraid/d\d+):| or next;
-	$l{$device} = { info => 'ATARAID block device', media_type => 'hd', device => $device, prefix => $device . 'p', bus => 'ataraid' };
-	log::l("ATARAID: $device");
-    }
-    values %l;
-}
-
-
-# cpu_name : arch() =~ /^alpha/ ? "cpu	" :
-# arch() =~ /^ppc/ ? "processor" : "vendor_id"
-
-# cpu_model : arch() =~ /^alpha/ ? "cpu model" :
-# arch() =~ /^ppc/ ? "cpu  " : "model name"
-
-# cpu_freq = arch() =~ /^alpha/ ? "cycle frequency [Hz]" :
-# arch() =~ /^ppc/ ? "clock" : "cpu MHz"
-
-sub getCPUs() { 
-    my (@cpus, $cpu);
-    foreach (cat_("/proc/cpuinfo")) {
-	   if (/^processor/) { # ix86 specific
-		  push @cpus, $cpu if $cpu;
-		  $cpu = {};
-	   }
-	   $cpu->{$1} = $2 if /^([^\t]+).*:\s(.*)$/;
-	   $cpu->{processor}++ if $1 eq "processor";
-    }
-    push @cpus, $cpu;
-    @cpus;
-}
-
-sub getSoundDevices() {
-    modules::probe_category('multimedia/sound');
-}
-
-sub isTVcard { member($_[0]{driver}, qw(bttv saa7134)) }
-
-sub getTVcards() { modules::probe_category('multimedia/tv') }
-
-sub getInputDevices() {
-    my (@devices, $device);
-    foreach (cat_('/proc/bus/input/devices')) {
-        if (/^I:/) {
-            push @devices, $device if $device;
-            $device = {};
-            $device->{vendor} = $1 if /Vendor=([0-9a-f]+)/;
-            $device->{id} = $1 if /Product=([0-9a-f]+)/;
-        }
-        $device->{description} = "|$1" if /N: Name="(.*)"/;
-        $device->{driver} = $1 if /H: Handlers=(\w+)/;
-        if (/P: Phys=(.*)/) {
-            $device->{location} = $1;
-            $device->{bus} = 'isa' if $device->{location} =~ /^isa/;
-            $device->{bus} = 'usb' if $device->{location} =~ /^usb/i;
-        }
-    }
-    push @devices, $device if $device;
-    @devices;
-}
-
-sub getSynapticsTouchpads() {
-    grep {
-        member($_->{description}, "|SynPS/2 Synaptics TouchPad", "|AlpsPS/2 ALPS TouchPad");
-    } getInputDevices();
-}
-
-sub getSerialModem {
-    my ($modules_conf, $o_mouse) = @_;
-    my $mouse = $o_mouse || {};
-    $mouse->{device} = readlink "/dev/mouse";
-    my $serdev = arch() =~ /ppc/ ? "macserial" : "serial";
-    eval { modules::load($serdev) };
-
-    my @modems;
-
-    probeSerialDevices();
-    foreach my $port (map { "ttyS$_" } (0..7)) {
-	next if $mouse->{device} =~ /$port/;
-     my $device = "/dev/$port";
-	next if !-e $device || !hasModem($device);
-     $serialprobe{$device}{device} = $device;
-     push @modems, $serialprobe{$device};
-    }
-    my @devs = pcmcia_probe();
-    foreach my $modem (@modems) {
-        #- add an alias for macserial on PPC
-        $modules_conf->set_alias('serial', $serdev) if arch() =~ /ppc/ && $modem->{device};
-        foreach (@devs) { $_->{type} =~ /serial/ and $modem->{device} = $_->{device} }
-    }
-    @modems;
-}
-
-sub getModem {
-    my ($modules_conf) = @_;
-    getSerialModem($modules_conf, {}), matching_driver__regexp('www\.linmodems\.org'),
-      matching_driver(list_modules::category2modules('network/modem'), list_modules::category2modules('network/slmodem'));
-}
-
-sub getSpeedtouch() {
-    grep { $_->{description} eq 'Alcatel|USB ADSL Modem (Speed Touch)' } probeall();
-}
-
-sub getBewan() {
-    matching_desc__regexp('Bewan Systems\|.*ADSL|BEWAN ADSL USB|\[Unicorn\]');
-}
-sub getSagem() {
-    matching_driver('eagle-usb');
-}
-
-# generate from the following from eci driver sources:
-# perl -e 'while (<>) { print qq("$1$2",\n"$3$4",\n) if /\b([a-z\d]*)\s*([a-z\d]*)\s*([a-z\d]*)\s*([a-z\d]*)$/ }' <modems.db|sort|uniq
-sub getECI() {
-    my @ids = (
-              "05090801",
-              "05472131",
-              "06590915",
-              "071dac81",
-              "08ea00c9",
-              "09150001",
-              "09150002",
-              "091500ca",
-              "091500e7",
-              "09150101",
-              "09150102",
-              "09150204",
-              "09150206",
-              "09150802",
-              "09150916",
-              "09158000",
-              "09158001",
-              "0915ac82",
-              "0baf00e6",
-              "0e600100",
-              "0e600101",
-              "0fe88000",
-              "16900203",
-              "16900205",
-             );
-    grep { member(sprintf("%04x%04x%04x%04x", $_->{vendor}, $_->{id}, $_->{subvendor}, $_->{subid}), @ids) } usb_probe();
-}
-
-sub is_lan_interface {
-    # we want LAN like interfaces here (eg: ath|br|eth|fddi|plip|ra|tr|usb|wifi|wlan).
-    # there's also bnep%d for bluetooth, bcp%d...
-    # we do this by blacklisting the following interfaces:
-    # - sit0 which is *always* created by net/ipv6/sit.c, thus is always created since net.agent loads ipv6 module
-    # - ippp|isdn|plip|ppp (initscripts suggest that isdn%d can be created but kernel sources claim not)
-    #   ippp%d are created by drivers/isdn/i4l/isdn_ppp.c
-    #   plip%d are created by drivers/net/plip.c
-    #   ppp%d are created by drivers/net/ppp_generic.c
-    # - wifi%d are created by 3rdparty/hostap/hostap_hw.c (pseudo statistics devices, #14523)
-    #
-    # we need both detection schemes since:
-    # - get_netdevices() use the SIOCGIFCONF ioctl that does not list interfaces that are down
-    # - /proc/net/dev does not list VLAN and IP aliased interfaces
-
-    $_[0] !~ /^(?:lo|ippp|isdn|plip|ppp|sit0|wifi)/;
-}
-
-sub is_wireless_interface {
-    my ($interface) = @_;
-    #- some wireless drivers don't always support the SIOCGIWNAME ioctl
-    #-   ralink devices need to be up to support it
-    #-   wlan-ng (prism2_*) need some special tweaks to support it
-    #- use sysfs as fallback to detect wireless interfaces,
-    #- i.e interfaces for which get_wireless_stats() is available
-    c::isNetDeviceWirelessAware($interface) || -e "/sys/class/net/$interface/wireless";
-}
-
-sub get_sysfs_device_id_map {
-    my ($dev_path) = @_;
-    my $is_usb = -f "$dev_path/bInterfaceNumber";
-    $is_usb ?
-      { id => '../idProduct', vendor => '../idVendor' } :
-      { id => "device", subid => "subsystem_device", vendor => "vendor", subvendor => "subsystem_vendor" };
-}
-
-sub getNet() {
-    grep { is_lan_interface($_) }
-      uniq(
-           (map { if_(/^\s*([A-Za-z0-9:\.]*):/, $1) } cat_("/proc/net/dev")),
-           c::get_netdevices(),
-          );
- }
-
-#sub getISDN() {
-#    mapgrep(sub {member (($_[0] =~ /\s*(\w*):/), @netdevices), $1 }, split(/\n/, cat_("/proc/net/dev")));
-#}
-
-sub getUPS() {
-    my @usb_devices = map { ($_->{name} = $_->{description}) =~ s/.*\|//; $_ } grep { $_->{description} !~ /GamePad|IR Combo Device|Joystick|SideWinder/ } usb_probe();
-
-    # MGE serial PnP devices:
-    (map {
-        $_->{port} = $_->{DEVICE};
-        $_->{bus} = "Serial";
-        $_->{driver} = "mge-utalk" if $_->{MODEL} =~ /0001/;
-        $_->{driver} = "mge-shut"  if $_->{MODEL} =~ /0002/;
-        $_->{media_type} = 'UPS';
-        $_->{description} = "MGE UPS SYSTEMS|UPS - Uninterruptible Power Supply" if $_->{MODEL} =~ /000[12]/;
-        $_;
-    } grep { $_->{DESCRIPTION} =~ /MGE UPS/ } values %serialprobe),
-      # USB UPSs;
-      (grep { $_->{driver} = 'hidups' if $_->{driver} eq 'usbhid'; $_->{description} =~ /American Power Conversion\|Back-UPS/ } @usb_devices),
-      (map {
-          $_->{port} = "auto";
-          $_->{media_type} = 'UPS';
-          $_->{driver} = 'newhidups';
-          $_;
-      } grep { $_->{driver} =~ /ups$/ && $_->{description} !~ /American Power Conversion\|Back-UPS/ } @usb_devices);
-}
-
-$pcitable_addons = <<'EOF';
-# add here lines conforming the pcitable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
-EOF
-
-$usbtable_addons = <<'EOF';
-# add here lines conforming the usbtable format (0xXXXX\t0xXXXX\t"\w+"\t".*")
-EOF
-
-sub install_addons {
-    my ($prefix) = @_;
-
-    #- this test means install_addons can only be called after ldetect-lst has been installed.
-    if (-d "$prefix/usr/share/ldetect-lst") {
-	my $update = 0;
-	foreach ([ 'pcitable.d', $pcitable_addons ], [ 'usbtable.d', $usbtable_addons ]) {
-	    my ($dir, $str) = @$_;
-	    -d "$prefix/usr/share/ldetect-lst/$dir" && $str =~ /^[^#]/m and $update = 1 and
-	      output "$prefix/usr/share/ldetect-lst/$dir/95drakx.lst", $str;
-	}
-	$update and run_program::rooted($prefix, "/usr/sbin/update-ldetect-lst");
-    }
-}
-
-sub add_addons {
-    my ($addons, @l) = @_;
-
-    foreach (split "\n", $addons) {
-	/^\s/ and die qq(bad detect_devices::probeall_addons line "$_");
-	s/^#.*//;
-	s/"(.*?)"/$1/g;
-	next if /^$/;
-	my ($vendor, $id, $driver, $description) = split("\t", $_, 4) or die qq(bad detect_devices::probeall_addons line "$_");
-	foreach (@l) {
-	    $_->{vendor} == hex $vendor && $_->{id} == hex $id or next;
-	    put_in_hash($_, { driver => $driver, description => $description });
-	}
-    }
-    @l;
-}
-
-sub pci_probe() {
-    add_addons($pcitable_addons, map {
-	my %l;
-	@l{qw(vendor id subvendor subid pci_bus pci_device pci_function media_type driver description)} = split "\t";
-	$l{$_} = hex $l{$_} foreach qw(vendor id subvendor subid);
-	$l{bus} = 'PCI';
-	\%l;
-    } c::pci_probe());
-}
-
-sub usb_probe() {
-    -e "/proc/bus/usb/devices" or return;
-
-    add_addons($usbtable_addons, map {
-	my %l;
-	@l{qw(vendor id media_type driver description pci_bus pci_device)} = split "\t";
-	$l{media_type} = join('|', grep { $_ ne '(null)' } split('\|', $l{media_type}));
-	$l{$_} = hex $l{$_} foreach qw(vendor id);
-	$l{bus} = 'USB';
-	\%l;
-    } c::usb_probe());
-}
-
-sub firewire_probe() {
-    my $dev_dir = '/sys/bus/ieee1394/devices';
-    my @l = map {
-        my $dir = "$dev_dir/$_";
-        my $get = sub { chomp_(cat_($_[0])) };
-        {
-            version => hex($get->("$dir/../vendor_id")),
-            specifier_id => hex($get->("$dir/specifier_id")),
-            specifier_version => hex($get->("$dir/version")),
-            bus => 'Firewire',
-        };
-    } grep { -f "$dev_dir/$_/specifier_id" } all($dev_dir);
-
-    my $e;
-    foreach (cat_('/proc/bus/ieee1394/devices')) {
-	if (m!Vendor/Model ID: (.*) \[(\w+)\] / (.*) \[(\w+)\]!) {
-	    push @l, $e = { 
-			   vendor => hex($2), id => hex($4), 
-			   description => join('|', $1, $3),
-			   bus => 'Firewire',
-			  };
-	} elsif (/Software Specifier ID: (\w+)/) {
-	    $e->{specifier_id} = hex $1;
-	} elsif (/Software Version: (\w+)/) {
-	    $e->{specifier_version} = hex $1;	    
-	}
-    }
-
-    foreach (@l) {
-	if ($_->{specifier_id} == 0x00609e && $_->{specifier_version} == 0x010483) {
-	    add2hash($_, { driver => 'sbp2', description => "Generic Firewire Storage Controller" });
-	} elsif ($_->{specifier_id} == 0x00005e && $_->{specifier_version} == 0x000001) {
-	    add2hash($_, { driver => 'eth1394', description => "IEEE 1394 IPv4 Driver (IPv4-over-1394 as per RFC 2734)" });
-	}
-    }
-    @l;
-}
-
-sub pcmcia_controller_probe() {
-    require list_modules;
-    my @modules = list_modules::category2modules('bus/pcmcia');
-    grep { member($_->{driver}, @modules) } probeall();
-}
-
-sub real_pcmcia_probe() {
-    return if $::testing;
-
-    c::pcmcia_probe() || first(map { $_->{driver} } pcmcia_controller_probe());
-}
-
-sub pcmcia_probe() {
-    -e '/var/run/stab' || -e '/var/lib/pcmcia/stab' or return ();
-
-    my (@devs, $desc);
-    foreach (cat_('/var/run/stab'), cat_('/var/lib/pcmcia/stab')) {
-	if (/^Socket\s+\d+:\s+(.*)/) {
-	    $desc = $1;
-	} else {
-	    my (undef, $type, $module, undef, $device) = split;
-	    push @devs, { description => $desc, driver => $module, type => $type, device => $device };
-	}
-    }
-    @devs;
-}
-
-my $dmi_probe;
-sub dmi_probe() {
-    $dmi_probe ||= [ map {
-	/(.*?)\t(.*)/ && { bus => 'DMI', driver => $1, description => $2 };
-    } c::dmi_probe() ];
-    @$dmi_probe;
-}
-
-# pcmcia_probe provides field "device", used in network.pm
-# => probeall with $probe_type is unsafe
-sub probeall() {
-    return if $::noauto;
-
-    require sbus_probing::main;
-    pci_probe(), usb_probe(), firewire_probe(), pcmcia_probe(), sbus_probing::main::probe(), dmi_probe();
-}
-sub matching_desc__regexp {
-    my ($regexp) = @_;
-    grep { $_->{description} =~ /$regexp/i } probeall();
-}
-sub matching_driver__regexp {
-    my ($regexp) = @_;
-    grep { $_->{driver} =~ /$regexp/i } probeall();
-}
-
-sub matching_driver {
-    my (@list) = @_;
-    grep { member($_->{driver}, @list) } probeall();
-}
-
-sub stringlist() { 
-    map {
-	sprintf("%-16s: %s%s%s", 
-		$_->{driver} || 'unknown', 
-		$_->{description} eq '(null)' ? sprintf("Vendor=0x%04x Device=0x%04x", $_->{vendor}, $_->{id}) : $_->{description},
-		$_->{media_type} ? sprintf(" [%s]", $_->{media_type}) : '',
-		$_->{subid} && $_->{subid} != 0xffff ? sprintf(" SubVendor=0x%04x SubDevice=0x%04x", $_->{subvendor}, $_->{subid}) : '',
-	       );
-    } probeall(); 
-}
-
-sub tryOpen($) {
-    my $F;
-    sysopen($F, devices::make($_[0]), c::O_NONBLOCK()) && $F;
-}
-
-sub tryWrite($) {
-    my $F;
-    sysopen($F, devices::make($_[0]), 1 | c::O_NONBLOCK()) && $F;
-}
-
-sub syslog() {
-    -r "/tmp/syslog" and return map { /<\d+>(.*)/ } cat_("/tmp/syslog");
-    my $LD_LOADER = $ENV{LD_LOADER} || "";
-    `$LD_LOADER /bin/dmesg`;
-}
-
-sub get_mac_model() {
-    my $mac_model = cat_("/proc/device-tree/model") || die "Can not open /proc/device-tree/model";
-    log::l("Mac model: $mac_model");
-    $mac_model;	
-}
-
-sub get_mac_generation() {
-    cat_('/proc/cpuinfo') =~ /^pmac-generation\s*:\s*(.*)/m ? $1 : "Unknown Generation";	
-}
-
-sub hasSMP() { 
-    return if $::testing;
-    c::detectSMP() || any { /\bProcessor #(\d+)\s+(\S*)/ && $1 > 0 && $2 ne 'invalid' } syslog();
-}
-sub hasPCMCIA() { $::o->{pcmcia} } #- because /proc/pcmcia seems not to be present on 2.4 at least (or use /var/run/stab)
-
-my (@dmis, $dmidecode_already_runned);
-
-# we return a list b/c several DMIs have the same name:
-sub dmidecode() {
-    return @dmis if $dmidecode_already_runned;
-
-    foreach (run_program::get_stdout('dmidecode')) {
-	if (/^\t\t(.*)/) {
-	    $dmis[-1]{string} .= "$1\n";
-	    $dmis[-1]{$1} = $2 if /^\t\t(.*): (.*)$/;
-	} elsif (my ($s) = /^\t(.*)/) {
-	    next if $s =~ /^DMI type /;
-	    $s =~ s/ Information$//;
-	    push @dmis, { name => $s };
-	}
-    }
-    $dmidecode_already_runned = 1;
-    @dmis;
-}
-sub dmidecode_category {
-    my ($cat) = @_;
-    my @l = find { $_->{name} eq $cat } dmidecode();
-    wantarray() ? @l : $l[0] || {};
-}
-
-sub computer_info() {
-     my $Chassis = dmidecode_category('Chassis')->{Type} =~ /(\S+)/ && $1;
-
-     my $date = dmidecode_category('BIOS')->{'Release Date'} || '';
-     my $BIOS_Year = $date =~ m!(\d{4})! && $1 ||
-	             $date =~ m!\d\d/\d\d/(\d\d)! && "20$1";
-	
-     +{ 
-	 isLaptop => member($Chassis, 'Portable', 'Laptop', 'Notebook', 'Hand Held', 'Sub Notebook', 'Docking Station'),
-	 if_($BIOS_Year, BIOS_Year => $BIOS_Year),
-     };
-}
-
-#- try to detect a laptop, we assume pcmcia service is an indication of a laptop or
-#- the following regexp to match graphics card apparently only used for such systems.
-sub isLaptop() {
-    arch() =~ /ppc/ ? 
-      get_mac_model() =~ /Book/ :
-      computer_info()->{isLaptop}
-	|| (matching_desc__regexp('C&T.*655[45]\d') || matching_desc__regexp('C&T.*68554') ||
-	    matching_desc__regexp('Neomagic.*Magic(Media|Graph)') ||
-	    matching_desc__regexp('ViRGE.MX') || matching_desc__regexp('S3.*Savage.*[IM]X') ||
-	    matching_desc__regexp('ATI.*(Mobility|LT)'))
-	|| cat_('/proc/cpuinfo') =~ /\bmobile\b/i;
-}
-
-sub BIGMEM() {
-    arch() !~ /x86_64|ia64/ && $> == 0 && c::dmiDetectMemory() > 4 * 1024;
-}
-
-sub is_i586() {
-    my $cpuinfo = cat_('/proc/cpuinfo');
-    $cpuinfo =~ /^cpu family\s*:\s*(\d+)/m && $1 < 6 ||
-      !has_cpu_flag('cmov');
-}
-sub has_cpu_flag {
-    my ($flag) = @_;
-    cat_('/proc/cpuinfo') =~ /^flags.*\b$flag\b/m;
-}
-
-sub matching_type {
-    my ($type) = @_;
-    if ($type =~ /laptop/i) {
-        return isLaptop();
-    } elsif ($type =~ /wireless/i) {
-        return any { is_wireless_interface($_) } getNet();
-    }
-}
-
-sub usbMice()      { grep { $_->{media_type} =~ /\|Mouse/ && $_->{driver} !~ /wacom/ ||
-			  $_->{driver} =~ /Mouse:USB/ } usb_probe() }
-sub usbWacom()     { grep { $_->{driver} =~ /wacom/ } usb_probe() }
-sub usbKeyboards() { grep { $_->{media_type} =~ /\|Keyboard/ } usb_probe() }
-sub usbStorage()   { grep { $_->{media_type} =~ /Mass Storage\|/ } usb_probe() }
-sub has_mesh()     { find { /mesh/ } all_files_rec("/proc/device-tree") }
-sub has_53c94()    { find { /53c94/ } all_files_rec("/proc/device-tree") }
-
-sub usbKeyboard2country_code {
-    my ($usb_kbd) = @_;
-    my ($F, $tmp);
-    sysopen($F, sprintf("/proc/bus/usb/%03d/%03d", $usb_kbd->{pci_bus}, $usb_kbd->{pci_device}), 0) and
-      sysseek $F, 0x28, 0 and
-      sysread $F, $tmp, 1 and
-      unpack("C", $tmp);
-}
-
-sub probeSerialDevices() {
-    require list_modules;
-    require modules;
-    modules::append_to_modules_loaded_at_startup_for_all_kernels(modules::load_category($::o->{modules_conf}, 'various/serial'));
-    foreach (0..3) {
-	#- make sure the device are created before probing,
-	devices::make("/dev/ttyS$_");
-	#- and make sure the device is a real terminal (major is 4).
-	int((stat "/dev/ttyS$_")[6]/256) == 4 or $serialprobe{"/dev/ttyS$_"} = undef;
-    }
-
-    #- for device already probed, we can safely (assuming device are
-    #- not moved during install :-)
-    #- include /dev/mouse device if using an X server.
-    mkdir_p("/var/lock");
-    -l "/dev/mouse" and $serialprobe{"/dev/" . readlink "/dev/mouse"} = undef;
-    foreach (keys %serialprobe) { m|^/dev/(.*)| and touch "/var/lock/LCK..$1" }
-
-    print STDERR "Please wait while probing serial ports...\n";
-    #- start probing all serial ports... really faster than before ...
-    #- ... but still take some time :-)
-    my %current; 
-    foreach (run_program::get_stdout('serial_probe')) {
-	if (/^\s*$/) {
-	    $serialprobe{$current{DEVICE}} = { %current } if $current{DEVICE};
-	    %current = ();
-	} elsif (/^([^=]+)=(.*?)\s*$/) {
-	    $current{$1} = $2;
-	}
-    }
-
-    foreach (values %serialprobe) {
-	$_->{DESCRIPTION} =~ /modem/i and $_->{CLASS} = 'MODEM'; #- hack to make sure a modem is detected.
-	$_->{DESCRIPTION} =~ /olitec/i and $_->{CLASS} = 'MODEM'; #- hack to make sure such modem gets detected.
-	log::l("probed $_->{DESCRIPTION} of class $_->{CLASS} on device $_->{DEVICE}");
-    }
-}
-
-sub probeSerial($) { $serialprobe{$_[0]} }
-
-sub hasModem($) {
-    $serialprobe{$_[0]} && $serialprobe{$_[0]}{CLASS} eq 'MODEM' && $serialprobe{$_[0]}{DESCRIPTION};
-}
-
-sub hasMousePS2 {
-    my $t; sysread(tryOpen($_[0]) || return, $t, 256) != 1 || $t ne "\xFE";
-}
-
-sub usb_description2removable {
-    local ($_) = @_;
-    return 'camera' if /\bcamera\b/i;
-    return 'memory_card' if /\bmemory\s?stick\b/i || /\bcompact\s?flash\b/i || /\bsmart\s?media\b/i;
-    return 'memory_card' if /DiskOnKey/i || /IBM-DMDM/i;
-    return 'zip' if /\bzip\s?(100|250|750)/i;
-    return 'floppy' if /\bLS-?120\b/i;
-    return;
-}
-
-sub usb2removable {
-    my ($e) = @_;
-    $e->{usb_driver} or return;
-
-    if ($e->{usb_driver} =~ /Removable:(.*)/) {
-	return $1;
-    } elsif (my $name = usb_description2removable($e->{usb_description})) {
-	return $name;
-    }
-    undef;
-}
-
-sub suggest_mount_point {
-    my ($e) = @_;
-
-    my $name = $e->{media_type};
-    if (member($e->{media_type}, 'hd', 'fd')) {
-	if (exists $e->{usb_driver}) {
-	    $name = usb2removable($e) || 'removable';
-	} elsif (isZipDrive($e)) {
-	    $name = 'zip';
-	} elsif ($e->{media_type} eq 'fd') {
-	    $name = 'floppy';
-	} else {
-	    log::l("suggest_mount_point: do not know what to with hd $e->{device}");
-	}
-    }
-    $name;
-}
-
-1;
diff --git a/perl-install/devices.pm b/perl-install/devices.pm
deleted file mode 100644
index 513c1714a..000000000
--- a/perl-install/devices.pm
+++ /dev/null
@@ -1,277 +0,0 @@
-package devices; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use run_program;
-use log;
-use c;
-
-sub size {
-    my ($dev) = @_;
-    sysopen(my $F, $dev, 0) or log::l("open $dev: $!"), return 0;
-
-    my $valid_offset = sub { sysseek($F, $_[0], 0) && sysread($F, my $_a, 1) };
-
-    #- first try getting the size nicely
-    if (my $size = c::total_sectors(fileno $F)) {
-	return $size * $common::SECTORSIZE;
-    }
-
-    #- sad it did not work, well searching the size using the dichotomy algorithm!
-    my $low = 0;
-    my ($high, $mid);
-
-    #- first find n where 2^n < size <= 2^n+1
-    for ($high = 1; $high > 0 && $valid_offset->($high); $high *= 2) { $low = $high }
-
-    while ($low < $high - 1) {
-	$mid = int(($low + $high) / 2);
-	$valid_offset->($mid) ? $low : $high = $mid;
-    }
-    $low + 1;
-}
-
-sub del_loop {
-    my ($dev) = @_;
-    run_program::run("losetup", "-d", $dev);
-}
-sub find_free_loop() {
-    foreach (0..255) {
-	my $dev = make("loop$_");
-	sysopen(my $F, $dev, 2) or next;
-	!ioctl($F, c::LOOP_GET_STATUS(), my $_tmp) && $! == 6 or next; #- 6 == ENXIO
-	return $dev;
-    }
-    die "no free loop found";
-}
-sub set_loop {
-    my ($file, $o_encrypt_key, $o_encryption) = @_;
-    eval { modules::load('loop') };
-    my $dev = find_free_loop();
-
-    if ($o_encrypt_key && $o_encryption) {
-	eval { modules::load('cryptoloop', arch() =~ /i.86/ ? 'aes-i586' : 'aes') };
-	my $cmd = "losetup -p 0 -e $o_encryption $dev $file";
-	log::l("calling $cmd");
-	open(my $F, "|$cmd");
-	print $F $o_encrypt_key;
-	close $F or die "losetup failed";
-    } else {
-	run_program::run("losetup", $dev, $file) or return;
-    }
-    $dev;
-}
-
-sub find_clp_loop {
-    my ($name) = @_;
-    foreach (0..255) {
-	my $dev = make("loop$_");
-	my ($file) = `losetup $dev 2>/dev/null` =~ m!\((.*?)\)! or return;
-	$file =~ s!^/sysroot/!/!;
-	basename($file) eq $name and return $dev, $file;
-    }
-    undef;
-}
-
-sub init_device_mapper() {
-    eval { modules::load('dm-mod') };
-    make('urandom');
-    my $control = '/dev/mapper/control';
-    if (! -e $control) {
-	my ($major) = cat_('/proc/devices') =~ /(\d+) misc$/m or return;
-	my ($minor) = cat_('/proc/misc') =~ /(\d+) device-mapper$/m or return;
-	mkdir_p(dirname($control));
-	syscall_('mknod', $control, c::S_IFCHR() | 0600, makedev($major, $minor)) or die "mknod $control failed: $!";	
-    }
-}
-
-sub entry {
-    my ($type, $major, $minor);
-    local ($_) = @_;
-
-    if (/^0x([\da-f]{3,4})$/i) {
-	$type = c::S_IFBLK();
-	($major, $minor) = unmakedev(hex $1);
-    } elsif (/^sd(.)(\d{0,2})/) {
-	$type = c::S_IFBLK();
-	$major = 8;
-	$minor = 16 * (ord($1) - ord('a')) + ($2 || 0);
-    } elsif (/^hd(.)(\d{0,2})/) {
-	$type = c::S_IFBLK();
-	($major, $minor) =
-	    @{ ${{'a' => [3, 0], 'b' => [3, 64],
-		   'c' => [22,0], 'd' => [22,64],
-		   'e' => [33,0], 'f' => [33,64],
-		   'g' => [34,0], 'h' => [34,64],
-		   'i' => [56,0], 'j' => [56,64],
-		   'k' => [57,0], 'l' => [57,64],
-                   'm' => [88,0], 'n' => [88,64],
-                   'o' => [89,0], 'p' => [89,64],
-                   'q' => [90,0], 'r' => [90,64],
-                   's' => [91,0], 't' => [91,64],
-	       }}{$1} or internal_error("unknown device $_") };
-	$minor += $2 || 0;
-    } elsif (/^ram(.*)/) {
-	$type = c::S_IFBLK();
-	$major = 1;
-	$minor = $1 eq '' ? 1 : $1;
-    } elsif (m|^rd/c(\d+)d(\d+)(p(\d+))?|) {
-	# dac 960 "rd/cXdXXpX"
-        $type = c::S_IFBLK();
-	$major = 48 + $1;
-	$minor = 8 * $2 + $4;
-    } elsif (m,(ida|cciss)/c(\d+)d(\d+)(?:p(\d+))?,) {
-	# Compaq Smart Array "ida/c0d0{p1}"
-	$type = c::S_IFBLK();
-	$major = ($1 eq 'ida' ? 72 : 104) + $2;
-	$minor = 16 * $3 + ($4 || 0);
-    } elsif (m,(ataraid)/d(\d+)(?:p(\d+))?,) {
-	# ATA raid "ataraid/d0{p1}"
-	$type = c::S_IFBLK();
-	$major = 114;
-	$minor = 16 * $1 + ($2 || 0);
-    } elsif (/(.*?)(\d+)$/) {
-	    ($type, $major, $minor) =
-	     @{ ${{"fd"          => [ c::S_IFBLK(), 2,  0  ],
-		   "hidbp-mse-"  => [ c::S_IFCHR(), 10, 32 ],
-		   "lp"          => [ c::S_IFCHR(), 6,  0  ],
-		   "usb/lp"      => [ c::S_IFCHR(), 180, 0 ],
-		   "input/event" => [ c::S_IFCHR(), 13, 64 ],
-		   "loop"        => [ c::S_IFBLK(), 7,  0  ],
-		   "md"          => [ c::S_IFBLK(), 9,  0  ],
-		   "nst"         => [ c::S_IFCHR(), 9, 128 ],
-		   "sr"          => [ c::S_IFBLK(), 11, 0  ],
-		   "ttyS"        => [ c::S_IFCHR(), 4, 64  ],
-		   "ubd/"        => [ c::S_IFBLK(), 98, 0  ],
-	       }}{$1} };
-	    $minor += $2;
-    }
-    unless ($type) {
-	($type, $major, $minor) =
-	     @{ ${{"aztcd"    => [ c::S_IFBLK(), 29, 0  ],
-		   "bpcd"     => [ c::S_IFBLK(), 41, 0  ],
-		   "cdu31a"   => [ c::S_IFBLK(), 15, 0  ],
-		   "cdu535"   => [ c::S_IFBLK(), 24, 0  ],
-		   "cm206cd"  => [ c::S_IFBLK(), 32, 0  ],
-		   "gscd"     => [ c::S_IFBLK(), 16, 0  ],
-		   "mcd"      => [ c::S_IFBLK(), 23, 0  ],
-		   "mcdx"     => [ c::S_IFBLK(), 20, 0  ],
-		   "mem"      => [ c::S_IFCHR(), 1,  1  ],
-		   "optcd"    => [ c::S_IFBLK(), 17, 0  ],
-		   "kbd"      => [ c::S_IFCHR(), 11, 0  ],
-		   "psaux"    => [ c::S_IFCHR(), 10, 1  ],
-		   "atibm"    => [ c::S_IFCHR(), 10, 3  ],
-		   "random"   => [ c::S_IFCHR(), 1,  8  ],
-		   "urandom"  => [ c::S_IFCHR(), 1,  9  ],
-		   "sbpcd"    => [ c::S_IFBLK(), 25, 0  ],
-		   "sjcd"     => [ c::S_IFBLK(), 18, 0  ],
-		   "tty"      => [ c::S_IFCHR(),  5, 0  ],
-		   "input/mice"
-		              => [ c::S_IFCHR(), 13, 63 ],
-		   "usbmouse" => [ c::S_IFCHR(), 13, 63 ], #- aka /dev/input/mice
-		   "adbmouse" => [ c::S_IFCHR(), 10, 10 ], #- PPC
-		   "vcsa"     => [ c::S_IFCHR(), 7,  128 ],
-		   "zero"     => [ c::S_IFCHR(), 1,  5  ],		     
-		   "null"     => [ c::S_IFCHR(), 1,  3  ],		     
-	       }}{$_} or internal_error("unknown device $_") };
-    }
-    ($type, $major, $minor);
-}
-
-
-sub make($) {
-    local $_ = my $file = $_[0];
-
-    if (m!^(.*/dev)/(.*)!) {
-	$_ = $2;
-    } else {
-	$file =~ m|^/| && -e $file or $file = "/dev/$_";
-    }
-    -e $file and return $file; #- assume nobody takes fun at creating files named as device
-
-    my ($type, $major, $minor) = entry($_);
-
-    if ($file =~ m|/dev/| && -e '/dev/.devfsd') {
-	#- argh, creating devices is no good with devfs...
-	#- return the file even if the device file does not exist
-	#- the caller will fail or not, better compatibility than raising an exception here
-	return $file;
-    }
-
-    #- make a directory for this inode if needed.
-    mkdir_p(dirname($file));
-
-    syscall_('mknod', $file, $type | 0600, makedev($major, $minor)) or die "mknod failed (dev $_): $!";
-
-    $file;
-}
-
-
-#- only isomorphic entries are allowed, 
-#- i.e. entries which can go devfs -> normal and normal -> devfs
-my %to_devfs = (
-    psaux => 'misc/psaux',
-    usbmouse => 'input/mice',
-);
-my %to_devfs_prefix = (
-    ttyS => 'tts/',
-);
-
-sub to_devfs {
-    my ($dev) = @_;
-    if (my $r = $to_devfs{$dev}) { 
-	return $r;
-    } elsif ($dev =~ /(.*?)(\d+)$/) {
-	my $r = $to_devfs_prefix{$1};
-	return "$r$2" if $r;
-    }
-    readlink("/dev/" . $dev);
-}
-
-sub read_proc_partitions_raw() {
-    my (undef, undef, @all) = cat_("/proc/partitions");
-    grep {
-	$_->{size} != 1 &&	  # skip main extended partition
-	$_->{size} != 0x3fffffff; # skip cdroms (otherwise stops cd-audios)
-    } map { 
-	my %l; 
-	@l{qw(major minor size dev)} = split; 
-	\%l;
-    } @all;
-}
-
-sub from_devfs {
-    my ($dev) = @_;
-    my %from_devfs = reverse %to_devfs;
-    if (my $r = $from_devfs{$dev}) { 
-	return $r;
-    } elsif ($dev =~ /(.*?)(\d+)$/) {
-	my %from_devfs_prefix = reverse %to_devfs_prefix;
-	my $r = $from_devfs_prefix{$1};
-	return "$r$2" if $r;
-    }
-    $dev = "/dev/" . $dev;
-    if (-e $dev) {
-        my ($major, $minor) = unmakedev((stat($dev))[6]);
-        my $r = find { $_->{major} == $major && $_->{minor} == $minor } read_proc_partitions_raw();
-        $r and return $r->{dev};
-    }
-    undef;
-}
-
-sub simple_partition_scan {
-    my ($part) = @_;
-    $part->{device} =~ /([hs]d[a-z])(\d+)$/;
-}
-sub part_number {
-    my ($part) = @_;
-    (simple_partition_scan($part))[1];
-}
-sub part_prefix {
-    my ($part) = @_;
-    (simple_partition_scan($part))[0];
-}
-
-1;
diff --git a/perl-install/diskdrake/dav.pm b/perl-install/diskdrake/dav.pm
deleted file mode 100644
index 1229d5f3f..000000000
--- a/perl-install/diskdrake/dav.pm
+++ /dev/null
@@ -1,115 +0,0 @@
-package diskdrake::dav; # $Id$
-
-use diagnostics;
-use strict;
-use diskdrake::interactive;
-use common;
-
-sub main {
-    my ($in, $all_hds) = @_;
-    my $davs = $all_hds->{davs};
-
-    $in->do_pkgs->ensure_binary_is_installed('davfs', 'mount.davfs') or return;
-    
-    my $quit;
-    do {
-	$in->ask_from_({ ok => '', messages => formatAlaTeX(
-N("WebDAV is a protocol that allows you to mount a web server's directory
-locally, and treat it like a local filesystem (provided the web server is
-configured as a WebDAV server). If you would like to add WebDAV mount
-points, select \"New\".")) },
-		       [ 
-			(map { 
-			    my $dav = $_;
-			    { label => $dav->{device}, val => $dav->{mntpoint}, clicked_may_quit => sub { config($in, $dav, $all_hds); 1 } } } @$davs),
-			 { val => N("New"), clicked_may_quit => sub { create($in, $all_hds); 1 } },
-			 { val => N("Quit"), clicked_may_quit => sub { $quit = 1 } },
-		       ]);
-    } until $quit;
-
-    diskdrake::interactive::Done($in, $all_hds);
-}
-
-sub create {
-    my ($in, $all_hds) = @_;
-
-    my $dav = { fs_type => 'davfs' };
-    ask_server($in, $dav, $all_hds) or return;
-    push @{$all_hds->{davs}}, $dav;
-    config($in, $dav, $all_hds);
-}
-
-sub config {
-    my ($in, $dav_, $all_hds) = @_;
-
-    my $dav = { %$dav_ }; #- working on a local copy so that "Cancel" works
-
-    my $action;
-    while ($action ne 'Done') {
-	my %actions = my @actions = actions($dav);
-	$action = $in->ask_from_list_('', format_dav_info($dav), 
-					 [ map { $_->[0] } group_by2 @actions ], 'Done') or return;
-	$actions{$action}->($in, $dav, $all_hds);    
-    }
-    %$dav_ = %$dav; #- applying
-}
-
-sub actions {
-    my ($dav) = @_;
-
-    (
-     if_($dav && $dav->{isMounted}, N_("Unmount") => sub { try('Unmount', @_) }),
-     if_($dav && $dav->{mntpoint} && !$dav->{isMounted}, N_("Mount") => sub { try('Mount', @_) }),
-     N_("Server") => \&ask_server,
-     N_("Mount point") => \&mount_point,
-     N_("Options") => \&options,
-     N_("Done") => sub {},
-    );
-}
-
-sub try {
-    my ($name, $in, $dav) = @_;
-    my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
-    eval { $f->($in, {}, $dav) };
-    if (my $err = $@) {
-	$in->ask_warn(N("Error"), formatError($err));
-    }
-}
-
-sub ask_server {
-    my ($in, $dav, $_all_hds) = @_;
-
-    my $server = $dav->{device};
-    $in->ask_from_({ messages => N("Please enter the WebDAV server URL"),
-		     focus_first => 1,
-		     callbacks => {
-		         complete => sub {
-			     $server =~ m!https?://! or $in->ask_warn('', N("The URL must begin with http:// or https://")), return 1;
-			     0;
-			 },
-		     } },
-		  [ { val => \$server } ]) or return;
-    $dav->{device} = $server;
-}
-
-sub options {
-    my ($in, $dav, $all_hds) = @_;
-    diskdrake::interactive::Options($in, {}, $dav, $all_hds);
-}
-sub mount_point { 
-    my ($in, $dav, $all_hds) = @_;
-    my $proposition = $dav->{device} =~ /(\w+)/ ? "/mnt/$1" : "/mnt/dav";
-    diskdrake::interactive::Mount_point_raw_hd($in, $dav, $all_hds, $proposition);
-}
-
-sub format_dav_info {
-    my ($dav) = @_;
-
-    my $info = '';
-    $info .= N("Server: ") . "$dav->{device}\n" if $dav->{device};
-    $info .= N("Mount point: ") . "$dav->{mntpoint}\n" if $dav->{mntpoint};
-    $info .= N("Options: %s", $dav->{options}) if $dav->{options};
-    $info;
-}
-
-1;
diff --git a/perl-install/diskdrake/diskdrake.html b/perl-install/diskdrake/diskdrake.html
deleted file mode 100644
index cba732084..000000000
--- a/perl-install/diskdrake/diskdrake.html
+++ /dev/null
@@ -1,139 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML//EN">
-<html>
-  <head>
-    <title>DiskDrake</title>
-  </head>
-  <body bgcolor="#ffffff">
-
-<center>
-<table width=80% border=0 cellpadding=10 cellspacing=10>
-<tr>
-<td bgcolor=#ffffff>
-
-    <p>
-    <img src="images/diskdrake1-def.jpg" alt="diskdrake logo" width=400 height=100>
-    <p>  
-
-    <H2>I- What's it?</H2>
-
-      The purpose of the DiskDrake project is to make easier the hard disk
-      partitionning. It is graphical, simple and powerful. The license is
-      the GPL (General Public License).
-      <BR>
-      Different skill levels will be available (newbie, advanced user, expert).
-      <BR>
-      It's written entirely in Perl and Perl/Gtk. It uses resize_fat which is
-      a perl rewrite of the work of Andrew Clausen (libresize).
-      <P>
-      DiskDrake is a project from Mandrakesoft, the company behind the popular
-      <a href="http://www.linux-mandrake.com">Linux-Mandrake</a>
-      operating-system.
-      <P>
-      A <A href="http://www.eatel.net/~john/diskdrake/faq.html">FAQ</A> is in construction.
-
-    <H2>II - What's available now</H2>
-
-    DiskDrake should be usable now...
-
-    it can:
-    <UL>
-	<LI> create partitions
-	<LI> delete partitions
-	<LI> change type of partition
-	<LI> format partitions
-	<LI> assign a mount point (<IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(21/07/99)</SMALL> propose a list
-	of classic mount points and verify the mount point is valid)
-	<LI> mount partitions
-	<LI> resize fat partitions
-	<LI> resize partitions (when not caring loosing its data)
-	<LI> clear partition table
-	<LI> auto allocation (usefull for install)
-	<LI> write fstab
-    </UL>
-
-with nice contextual menu (shortcuts available, but dangerous as all actions are
-available, whereas with the contextual menu these actions are hidden. This will
-change)
-
-    <P><IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(25/07/99)</SMALL> 
-    A new Expert button appear now. It toggles between
-    expert and normal mode. Some changes in information displayed:
-    <UL>
-       <LI> when you click (or focus) the drive tab (eg: hda), you get
-       information about your drive: size, geometry
-       (cylinders/sectors/heads number), type (eg: IBM DDRS-39130D), and bus/id.
-       In normal mode you have only the size.
-       <LI> the windows drive letter (eg: C: D: ...)
-       <LI> the `start sector' information from normal mode, it still appears in
-       expert mode
-       <LI> the start&end cylinder of each partition is now displayed in expert
-       mode
-       <LI> the type is displayed numerically in expert mode
-    </UL>
-
-    <P><IMG SRC="/images/updated.gif" ALT="updated"><SMALL>(25/07/99)</SMALL>
-    The mount point in the `Create' window and `Change type' window is now a
-    combo box. It lets you choose between classical mount points (/ /usr /var
-    ...) but with already allocated mount points removed.
-
-    <H2>III - Actual developpment</H2>
-
-    We need people!!!
-
-    <UL>
-      <LI><B>Tests</B> and remove bugs (no known yet :)
-      <LI>integrate ext2resize (which has been release in version 1.0.0 <IMG
-      SRC="/images/updated.gif" ALT="updated"><SMALL>(26/07/99)</SMALL>)
-      <LI>add possibility to move partition without loosing data (by copying all
-      data) <IMG SRC="/images/updated.gif" ALT="updated">
-      <LI>Improve the look
-      <LI>Add a text-only version
-      <LI>Help text, tutorial...
-      <LI>Internationalization
-      <LI>Add some features...
-      <LI>Packaging (rpm, deb, slp...)
-    </UL>
-	
-    <H2>IV- ScreenShot</H2>
-
-    Warning: features was the main focus, so don't be too hard :)
-
-    <P>
-      <CENTER><IMG SRC="1.gif"></IMG></CENTER>
-      <CENTER>DiskDrake main interface</CENTER>      
-      
-      <BR>
-      <CENTER><IMG SRC="3.gif"></IMG></CENTER>
-      <CENTER>create dialog box</CENTER>      
-      
-    <H2>V - Contacts</H2>
-    
-    A Mailing List has been created to allow developpers to discuss about DiskDrake.<BR>
-
-    <P>
-    Send a mail to: <A HREF="mailto:sympa@linux-mandrake.com">sympa@linux-mandrake.com</A>
-
-    <BR>Put in the subject: subscribe diskdrake
-    <BR>When you're subscribed, send your messages to: <A HREF="mailto:diskdrake@linux-mandrake.com">diskdrake@linux-mandrake.com</A>
-
-    <P>Otherwise you can contact directly the <A HREF="mailto:pixel@linux-mandrake.com">project leader</A>.
-
-    <H2>VI - Download</H2>
-    
-    Warning: You must have <a href="http://www.perl.com/CPAN/modules/by-module/Gtk/Gtk-Perl-0.5121.tar.gz">Gtk-Perl</a>.
-    You can get the rpm from the <a href="http://linux-mandrake.com/cooker/">Cooker</a> distribution.
-   
-    <P>You also need perl version 5.00503 or better
-
-    <P> Here you can find the plain tgz or a rpm:
-    <a href="ftp://ftp.phys.ttu.edu/pub/mandrake-devel/contrib/others/diskdrake/">diskdrake</a> (Other mirrors in <a href="http://linux-mandrake.com/cooker/">Cooker</a>)
-
-</td>
-</tr>
-</table>
-<p>
-<a href="/en/fpowerpack.php3"><img src="/images/mandrake6.0-loop.gif" width=468 height=60 alt="Mandrake 6.0 PowerPack"></a>
-</center>    
-  </body>
-  <address><a href="mailto:pixel@linux-mandrake.com"></a></address>
-</html>
diff --git a/perl-install/diskdrake/hd_gtk.pm b/perl-install/diskdrake/hd_gtk.pm
deleted file mode 100644
index 036bfff85..000000000
--- a/perl-install/diskdrake/hd_gtk.pm
+++ /dev/null
@@ -1,394 +0,0 @@
-package diskdrake::hd_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use ugtk2 qw(:helpers :wrappers :create);
-use partition_table;
-use fs::type;
-use detect_devices;
-use diskdrake::interactive;
-use run_program;
-use loopback;
-use devices;
-use raid;
-use any;
-use log;
-use fsedit;
-
-my ($width, $height, $minwidth) = (400, 50, 5);
-my ($all_hds, $in, $do_force_reload, $current_kind, $current_entry, $update_all);
-my ($w, @notebook, $done_button);
-
-=begin
-
-
-=head1 SYNOPSYS
-
-struct {
-  string name      # which is displayed in tab of the notebook
-  bool no_auto     # wether the kind can disappear after creation
-  string type      # one of { 'hd', 'raid', 'lvm', 'loopback', 'removable', 'nfs', 'smb' }
-  hd | hd_lvm | part_raid[] | part_loopback[] | raw_hd[]  val
-
-  # 
-  widget main_box
-  widget display_box
-  widget action_box
-  widget info_box
-} current_kind
-
-part current_entry
-
-notebook current_kind[]
-
-=cut
-
-sub main {
-    ($in, $all_hds, my $nowizard, $do_force_reload, my $interactive_help) = @_;
-
-    @notebook = ();
-
-    local $in->{grab} = 1;
-
-    $w = ugtk2->new('DiskDrake');
-    $::main_window = $w->{real_window} if !$::isEmbedded && !$::isInstall;
-    my $rc = "/usr/share/libDrakX/diskdrake.rc";
-    -r $rc or $rc = dirname(__FILE__) . "/../diskdrake.rc";
-    -r $rc or $rc = dirname(__FILE__) . "/../share/diskdrake.rc";
-    Gtk2::Rc->parse($rc);
-
-    # TODO
-#    is_empty_array_ref($all_hds->{raids}) or raid::stopAll;
-#    updateLoopback();
-
-    gtkadd($w->{window},
-	   gtkpack_(Gtk2::VBox->new(0,7),
-		    0, filesystems_button_box(),
-		    1, (my $notebook_widget = Gtk2::Notebook->new),
-		    0, (my $per_kind_action_box = Gtk2::HBox->new(0,0)),
-		    0, (my $general_action_box  = Gtk2::HBox->new(0,0)),
-		   ),
-	  );
-    my $lock;
-    $update_all = sub {
-	$lock and return;
-	$lock = 1;
-	partition_table::assign_device_numbers($_) foreach fs::get::hds($all_hds);
-	create_automatic_notebooks($notebook_widget);
-	general_action_box($general_action_box, $nowizard, $interactive_help);
-	per_kind_action_box($per_kind_action_box, $current_kind);
-	current_kind_changed($in, $current_kind);
-	current_entry_changed($current_kind, $current_entry);
-	$lock = 0;
-    };
-    create_automatic_notebooks($notebook_widget);
-
-    $notebook_widget->signal_connect(switch_page => sub {
-	$current_kind = $notebook[$_[2]];
-	$current_entry = '';
-	$update_all->();
-    });
-    $w->sync;
-    $done_button->grab_focus;
-    $in->ask_okcancel(N("Read carefully!"), N("Please make a backup of your data first"), 1) or return
-      if $::isStandalone;
-    $in->ask_warn('', 
-N("If you plan to use aboot, be careful to leave a free space (2048 sectors is enough)
-at the beginning of the disk")) if arch() eq 'alpha' && !$::isEmbedded;
-
-    $w->main;
-}
-
-sub try {
-    my ($name, @args) = @_;
-    my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
-    try_($name, \&$f, @args);
-}
-sub try_ {
-    my ($name, $f, @args) = @_;
-
-    fsedit::undo_prepare($all_hds) if $name ne 'Undo';
-
-    my $v = eval { $f->($in, @args, $all_hds) };
-    if (my $err = $@) {
-	$in->ask_warn(N("Error"), formatError($err));
-    }
-    if ($v eq 'force_reload') {	
-	$all_hds = $do_force_reload->();
-    }
-
-    $current_entry = '' if !diskdrake::interactive::is_part_existing($current_entry, $all_hds);
-    $update_all->();
-
-    Gtk2->main_quit if $v && member($name, 'Done', 'Wizard');
-}
-
-################################################################################
-# generic: helpers
-################################################################################
-sub add_kind2notebook {
-    my ($notebook_widget, $kind) = @_;
-    die if $kind->{main_box};
-
-    $kind->{display_box} = gtkset_size_request(Gtk2::HBox->new(0,0), $width, $height);
-    $kind->{action_box} = gtkset_size_request(Gtk2::VBox->new(0,0), $::isStandalone ? 165 : 150, $::isEmbedded ? 150 : 180);
-    $kind->{info_box} = Gtk2::VBox->new(0,0);
-    $kind->{main_box} =
-      gtkpack_(Gtk2::VBox->new(0,7),
-	       0, $kind->{display_box},
-	       1, gtkpack_(Gtk2::HBox->new(0,7),
-			   0, $kind->{action_box},
-			   1, $kind->{info_box}));
-    ugtk2::add2notebook($notebook_widget, $kind->{name}, $kind->{main_box});
-    push @notebook, $kind;
-    $kind;
-}
-
-sub general_action_box {
-    my ($box, $nowizard, $interactive_help) = @_;
-    $_->destroy foreach $box->get_children;
-
-    gtkadd($box, gtksignal_connect(Gtk2::Button->new(N("Help")), clicked => $interactive_help)) if $interactive_help;
-
-    my @actions = (if_($::isInstall && !$nowizard, N_("Wizard")), 
-		   diskdrake::interactive::general_possible_actions($in, $all_hds), 
-		   N_("Done"));
-    foreach my $s (@actions) {
-	my $button = Gtk2::Button->new(translate($s));
-	$done_button = $button if $s eq 'Done';
-	gtkadd($box, gtksignal_connect($button, clicked => sub { try($s) }));
-    }
-}
-sub per_kind_action_box {
-    my ($box, $kind) = @_;
-    $_->destroy foreach $box->get_children;
-
-    $kind->{type} =~ /hd|lvm/ or return;
-
-    foreach my $s (diskdrake::interactive::hd_possible_actions($in, kind2hd($kind), $all_hds)) {
-	gtkadd($box, 
-	       gtksignal_connect(Gtk2::Button->new(translate($s)),
-				 clicked => sub { try($s, kind2hd($kind)) }));
-    }
-}
-sub per_entry_action_box {
-    my ($box, $kind, $entry) = @_;
-    $_->destroy foreach $box->get_children;
-
-    if ($entry) {
-	my @buttons = map { 
-	    my $s = $_;
-	    my $w = Gtk2::Button->new(translate($s));
-	    $w->signal_connect(clicked => sub { try($s, kind2hd($kind), $entry) });
-	    $w;
-	} diskdrake::interactive::part_possible_actions($in, kind2hd($kind), $entry, $all_hds);
-
-	gtkadd($box, gtkadd(Gtk2::Frame->new(N("Choose action")),
-			    create_scrolled_window(gtkpack__(Gtk2::VBox->new(0,0), @buttons)))) if @buttons;
-    } else {
-	my $txt = !$::isStandalone && fsedit::is_one_big_fat_or_NT($all_hds->{hds}) ?
-N("You have one big Microsoft Windows partition.
-I suggest you first resize that partition
-(click on it, then click on \"Resize\")") : N("Please click on a partition");
-	gtkpack($box, gtktext_insert(Gtk2::TextView->new, $txt));
-    }
-}
-
-sub per_entry_info_box {
-    my ($box, $kind, $entry) = @_;
-    $_->destroy foreach $box->get_children;
-    my $info;
-    if ($entry) {
-	$info = diskdrake::interactive::format_part_info(kind2hd($kind), $entry);
-    } elsif ($kind->{type} =~ /hd|lvm/) {
-	$info = diskdrake::interactive::format_hd_info($kind->{val});
-    }
-    gtkpack($box, gtkadd(Gtk2::Frame->new(N("Details")), gtkset_justify(Gtk2::Label->new($info), 'left')));
-}
-
-sub current_kind_changed {
-    my ($_in, $kind) = @_;
-
-    $_->destroy foreach $kind->{display_box}->get_children;
-
-    my $v = $kind->{val};
-    my @parts = 
-      $kind->{type} eq 'raid' ? grep { $_ } @$v :
-      $kind->{type} eq 'loopback' ? @$v : fs::get::hds_fstab_and_holes($v);
-    my $totalsectors = 
-      $kind->{type} =~ /raid|loopback/ ? sum(map { $_->{size} } @parts) : $v->{totalsectors};
-    create_buttons4partitions($kind, $totalsectors, @parts);
-}
-
-sub current_entry_changed {
-    my ($kind, $entry) = @_;
-    $current_entry = $entry;
-    if ($kind) {
-	per_entry_action_box($kind->{action_box}, $kind, $entry);
-	per_entry_info_box($kind->{info_box}, $kind, $entry);
-    }
-}
-
-sub create_automatic_notebooks {
-    my ($notebook_widget) = @_;
-
-    $_->{marked} = 0 foreach @notebook;
-    my $may_add = sub {
-	my ($kind) = @_;
-	my @l = grep { $kind->{val} == $_->{val} } @notebook;
-	@l > 1 and log::l("weird: create_automatic_notebooks");
-	$kind = $l[0] || add_kind2notebook($notebook_widget, $kind);
-	$kind->{marked} = 1;
-    };
-    $may_add->(hd2kind($_)) foreach @{$all_hds->{hds}};
-    $may_add->(lvm2kind($_)) foreach @{$all_hds->{lvms}};
-    $may_add->(raid2kind()) if @{$all_hds->{raids}};
-    $may_add->(loopback2kind()) if @{$all_hds->{loopbacks}};
-
-    @notebook = grep_index {
-	my $b = $_->{marked} or $notebook_widget->remove_page($::i);
-	$b;
-    } @notebook;
-    @notebook or die N("No hard drives found");
-}
-
-################################################################################
-# parts: helpers
-################################################################################
-sub create_buttons4partitions {
-    my ($kind, $totalsectors, @parts) = @_;
-
-    $width = max($width, 0.9 * second($w->{window}->window->get_size)) if $w->{window}->window;
-
-    my $ratio = $totalsectors ? ($width - @parts * $minwidth) / $totalsectors : 1;
-    while (1) {
-	my $totalwidth = sum(map { $_->{size} * $ratio + $minwidth } @parts);
-	$totalwidth <= $width and last;
-	$ratio /= $totalwidth / $width * 1.1;
-    }
-
-    my $current_button;
-    my $set_current_button = sub {
-	my ($w) = @_;
-	$current_button->set_active(0) if $current_button;
-	($current_button = $w)->set_active(1);
-    };
-
-    foreach my $entry (@parts) {
-	my $w = Gtk2::ToggleButton->new_with_label($entry->{mntpoint} || '') or die '';
-	$w->signal_connect(clicked => sub { 
-	    $current_button != $w or return;
-	    current_entry_changed($kind, $entry); 
-	    $set_current_button->($w);
-	});
-	$w->signal_connect(key_press_event => sub {
-	    my (undef, $event) = @_;
-	    member('control-mask', @{$event->state}) && $w == $current_button or return; 
-	    my $c = chr $event->keyval;
-
-	    foreach my $s (diskdrake::interactive::part_possible_actions($in, kind2hd($kind), $entry, $all_hds)) {
-		${{
-		    Create => 'c', Delete => 'd', Format => 'f', 
-		    Loopback => 'l', Resize => 'r', Type => 't', 
-		    Mount => 'M', Unmount => 'u', 'Mount point' => 'm',
-		    'Add to LVM' => 'L', 'Remove from LVM' => 'L', 
-		    'Add to RAID' => 'R', 'Remove from RAID' => 'R',
-		}}{$s} eq $c or next;
-
-		try($s, kind2hd($kind), $entry);
-		last;
-	    }
-	});
-	$w->set_name("PART_" . fs::type::part2type_name($entry));
-	$w->set_size_request($entry->{size} * $ratio + $minwidth, 0);
-	gtkpack__($kind->{display_box}, $w);
-	if ($current_entry && fsedit::are_same_partitions($current_entry, $entry)) {
-	    $set_current_button->($w);
-	    $w->grab_focus;
-	}
-    }
-}
-
-
-################################################################################
-# disks: helpers
-################################################################################
-sub current_hd() { 
-    $current_kind->{type} eq 'hd' or die 'current_hd called but $current_kind is not an hd';
-    $current_kind->{val};
-}
-sub current_part() {
-    current_hd();
-    $current_entry;
-}
-
-sub kind2hd {
-    my ($kind) = @_;
-    $kind->{type} =~ /hd|lvm/ ? $kind->{val} : {};
-}
-
-sub hd2kind {
-    my ($hd) = @_;
-    { type => 'hd', name => $hd->{device}, val => $hd };
-}
-
-sub filesystems_button_box() {
-    my @types = (N_("Ext2"), N_("Journalised FS"), N_("Swap"), arch() =~ /sparc/ ? N_("SunOS") : arch() eq "ppc" ? N_("HFS") : N_("Windows"),
-		 N_("Other"), N_("Empty"));
-    my %name2fs_type = (Ext2 => 'ext2', 'Journalised FS' => 'ext3', Swap => 'swap', Other => 'other', "Windows" => 'vfat', HFS => 'hfs');
-
-    gtkpack(Gtk2::HBox->new(0,0), 
-	    N("Filesystem types:"),
-	    map { my $w = Gtk2::Button->new(translate($_));
-		  my $t = $name2fs_type{$_};
-		  $w->signal_connect(clicked => sub { try_('', \&createOrChangeType, $t, current_hd(), current_part()) });
-		  $w->can_focus(0);
-		  $w->set_name($_); 
-		  $w;
-	    } @types);
-}
-
-sub createOrChangeType {
-    my ($in, $fs_type, $hd, $part, $all_hds) = @_;
-
-    $part ||= !fs::get::hds_fstab($hd) && 
-              { pt_type => 0, start => 1, size => $hd->{totalsectors} - 1 };
-    $part or return;
-    if ($fs_type eq 'other') {
-	$in->ask_warn('', N("Use ``%s'' instead", isEmpty($part) ? N("Create") : N("Type")));
-    } elsif (!$fs_type) {
-	$in->ask_warn('', N("Use ``%s'' instead", N("Delete"))) if !isEmpty($part);
-    } elsif (isEmpty($part)) {
-	fs::type::set_fs_type($part, $fs_type);
-	diskdrake::interactive::Create($in, $hd, $part, $all_hds);
-    } else {
-	return if $fs_type eq $part->{fs_type};
-	$in->ask_warn('', isBusy($part) ? N("Use ``Unmount'' first") : N("Use ``%s'' instead", N("Type")));
-    }
-}
-
-################################################################################
-# lvms: helpers
-################################################################################
-sub lvm2kind {
-    my ($lvm) = @_;
-    { type => 'lvm', name => $lvm->{VG_name}, val => $lvm };
-}
-
-################################################################################
-# raids: helpers
-################################################################################
-sub raid2kind() {
-    { type => 'raid', name => 'raid', val => $all_hds->{raids} };
-}
-
-################################################################################
-# loopbacks: helpers
-################################################################################
-sub loopback2kind() {
-    { type => 'loopback', name => 'loopback', val => $all_hds->{loopbacks} };
-}
-
-1;
diff --git a/perl-install/diskdrake/interactive.pm b/perl-install/diskdrake/interactive.pm
deleted file mode 100644
index 404dd9c79..000000000
--- a/perl-install/diskdrake/interactive.pm
+++ /dev/null
@@ -1,1318 +0,0 @@
-package diskdrake::interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use fs::type;
-use partition_table;
-use partition_table::raw;
-use detect_devices;
-use run_program;
-use loopback;
-use devices;
-use fsedit;
-use raid;
-use any;
-use log;
-
-
-=begin
-
-=head1 SYNOPSYS
-
-struct part {
-  int active            # one of { 0 | 0x80 }  x86 only, primary only
-  int start             # in sectors
-  int size              # in sectors
-  int pt_type           # 0x82, 0x83, 0x6 ...
-  string fs_type        # 'ext2', 'nfs', ...
-
-  int part_number       # 1 for hda1...
-  string device         # 'hda5', 'sdc1' ...
-  string devfs_device   # 'ide/host0/bus0/target0/lun0/part5', ...
-  string prefer_devfs_name # should the {devfs_device} or the {device} be used in fstab
-  string device_LABEL   # volume label. LABEL=xxx can be used in fstab instead of
-  bool prefer_device_LABEL # should the {device_LABEL} or the {device} be used in fstab
-  bool faked_device     # false if {device} is a real device, true for nfs/smb/dav/none devices. If the field does not exist, we do not know
-
-  string rootDevice     # 'sda', 'hdc' ... (can also be a VG_name)
-  string real_mntpoint  # directly on real /, '/tmp/hdimage' ...
-  string mntpoint       # '/', '/usr' ...
-  string options        # 'defaults', 'noauto'
-  string device_windobe # 'C', 'D' ...
-  string encrypt_key    # [0-9A-Za-z./]{20,}
-  string comment        # comment to have in fstab
-  string volume_label   # 
-
-  bool is_removable     # is the partition on a removable drive
-  bool isMounted
-
-  bool isFormatted
-  bool notFormatted 
-    #  isFormatted                  means the device is formatted
-    # !isFormatted &&  notFormatted means the device is not formatted
-    # !isFormatted && !notFormatted means we do not know which state we're in
-
-  string raid       # for partitions of type isRawRAID and which isPartOfRAID, the raid device
-  string lvm        # partition used as a PV for the VG with {lvm} as VG_name  #-#
-  loopback loopback[]   # loopback living on this partition
-
-  # internal
-  string real_device     # '/dev/loop0', '/dev/loop1' ...
-
-  # internal CHS (Cylinder/Head/Sector)
-  int start_cyl, start_head, start_sec, end_cyl, end_head, end_sec, 
-}
-
-struct part_allocate inherits part {
-  int maxsize        # in sectors (alike "size")
-  int ratio          # 
-  string hd          # 'hda', 'hdc'
-  string parts       # for creating raid partitions. eg: 'foo bar' where 'foo' and 'bar' are mntpoint
-}
-
-struct part_raid inherits part {
-  string chunk-size  # in KiB, usually '64'
-  string level       # one of { 0, 1, 4, 5, 'linear' }
-  string UUID
-
-  part disks[]
-
-  # invalid: active, start, rootDevice, device_windobe?, CHS
-}
-
-struct part_loopback inherits part {
-  string loopback_file   # absolute file name which is relative to the partition
-  part loopback_device   # where the loopback file live
-
-  # device is special here: it is the absolute filename of the loopback file.
-
-  # invalid: active, start, rootDevice, device_windobe, CHS
-}
-
-struct part_lvm inherits part {
-  # invalid: active, start, device_windobe, CHS
-  string lv_name
-}
-
-
-struct partition_table_elem {
-  part normal[]     #
-  part extended     # the main/next extended
-  part raw[4]       # primary partitions
-}
-
-struct geom {
-  int heads 
-  int sectors
-  int cylinders
-  int totalcylinders # for SUN, forget it
-  int start          # always 0, forget it
-}
-
-struct hd {
-  int totalsectors      # size in sectors
-  string device         # 'hda', 'sdc' ...
-  string device_alias   # 'cdrom', 'floppy' ...
-  string media_type     # one of { 'hd', 'cdrom', 'fd', 'tape' }
-  string capacity       # contain of the strings of { 'burner', 'DVD' }
-  string info           # name of the hd, eg: 'QUANTUM ATLAS IV 9 WLS'
-
-  bool readonly         # is it allowed to modify the partition table
-  bool getting_rid_of_readonly_allowed # is it forbidden to write because the partition table is badly handled, or is it because we MUST not change the partition table
-  bool isDirty          # does it need to be written to the disk 
-  list will_tell_kernel # list of actions to tell to the kernel so that it knows the new partition table
-  bool hasBeenDirty     # for undo
-  bool rebootNeeded     # happens when a kernel reread failed
-  list partitionsRenumbered # happens when you
-                            # - remove an extended partition which is not the last one
-                            # - add an extended partition which is the first extended partition
-  list allPartitionsRenumbered # used to update bootloader configuration
-  int bus, id
-  
-  partition_table_elem primary
-  partition_table_elem extended[]
-
-  geom geom
-
-  # internal
-  string prefix         # for some RAID arrays device=>c0d0 and prefix=>c0d0p
-  string file           # '/dev/hda' ...
-}
-
-struct hd_lvm inherits hd {
-  int PE_size           # block size (granularity, similar to cylinder size on x86)
-  string VG_name        # VG name
-
-  part_lvm disks[]
-
-  # invalid: bus, id, extended, geom
-}
-
-struct raw_hd inherits hd {
-  string fs_type       # 'ext2', 'nfs', ...
-  string mntpoint   # '/', '/usr' ...
-  string options    # 'defaults', 'noauto'
-
-  # invalid: isDirty, will_tell_kernel, hasBeenDirty, rebootNeeded, primary, extended
-}
-
-struct all_hds {
-  hd hds[]
-  hd_lvm lvms[]
-  part_raid raids[]
-  part_loopback loopbacks[]
-  raw_hd raw_hds[]
-  raw_hd nfss[]
-  raw_hd smbs[]
-  raw_hd davs[]
-  raw_hd special[]
-
-  # internal: if fstab_to_string($all_hds) eq current_fstab then no need to save
-  string current_fstab
-}
-
-
-=cut
-
-
-sub main {
-    my ($in, $all_hds, $_nowizard, $do_force_reload, $_interactive_help) = @_;
-
-    if ($in->isa('interactive::gtk')) {
-	require diskdrake::hd_gtk;
-	goto &diskdrake::hd_gtk::main;
-    }
-
-    my ($current_part, $current_hd);
-    
-    while (1) {
-	my $choose_txt = $current_part ? N_("Choose another partition") : N_("Choose a partition");
-	my $parts_and_holes = [ fs::get::fstab_and_holes($all_hds) ];
-	my $choose_part = sub {
-	    $current_part = $in->ask_from_listf('diskdrake', translate($choose_txt), 
-						sub {
-						    my $hd = fs::get::part2hd($_[0] || return, $all_hds);
-						    format_part_info_short($hd, $_[0]);
-						}, $parts_and_holes, $current_part) || return;
-	    $current_hd = fs::get::part2hd($current_part, $all_hds);
-	};
-
-	$choose_part->() if !$current_part;
-	return if !$current_part;
-
-	my %actions = my @actions = (
-            if_($current_part, 
-          (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $current_hd, $current_part, $all_hds) } } part_possible_actions($in, $current_hd, $current_part, $all_hds)),
-		'____________________________' => sub {},
-            ),
-            if_(@$parts_and_holes > 1, $choose_txt => $choose_part),
-	    if_($current_hd,
-	  (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $current_hd, $all_hds) } } hd_possible_actions_interactive($in, $current_hd, $all_hds)),
-	    ), 
-	  (map { my $s = $_; $_ => sub { $diskdrake::interactive::{$s}($in, $all_hds) } } general_possible_actions($in, $all_hds)),
-        );
-	my ($actions) = list2kv(@actions);
-	my $a;
-	if ($current_part) {
-	    $in->ask_from_({
-			    cancel => N("Exit"), 
-			    title => 'diskdrake',
-			    messages => format_part_info($current_hd, $current_part),
-			   },
-			   [ { val => \$a, list => $actions, format => \&translate, type => 'list', sort => 0, gtk => { use_boxradio => 0 } } ]) or last;
-	    my $v = eval { $actions{$a}() };
-	    if (my $err = $@) {
-		$in->ask_warn(N("Error"), formatError($err));		
-	    }
-	    if ($v eq 'force_reload') {
-		$all_hds = $do_force_reload->();
-	    }
-	    $current_hd = $current_part = '' if !is_part_existing($current_part, $all_hds);	    
-	} else {
-	    $choose_part->();
-	}
-	partition_table::assign_device_numbers($_) foreach fs::get::hds($all_hds);
-    }
-    return if eval { Done($in, $all_hds) };
-    if (my $err = $@) {
-    	$in->ask_warn(N("Error"), formatError($err));
-    }
-    goto &main;
-}
-
-
-
-
-################################################################################
-# general actions
-################################################################################
-sub general_possible_actions {
-    my ($_in, $_all_hds) = @_;
-    N_("Undo"), ($::expert ? N_("Toggle to normal mode") : N_("Toggle to expert mode"));
-}
-
-
-sub Undo {
-    my ($_in, $all_hds) = @_;
-    fsedit::undo($all_hds);
-}
-
-sub Wizard {
-    $::o->{wizard} = 1;
-    goto &Done;
-}
-
-sub Done {
-    my ($in, $all_hds) = @_;
-    eval { raid::verify($all_hds->{raids}) };
-    if (my $err = $@) {
-	$::expert or die;
-	$in->ask_okcancel('', [ formatError($err), N("Continue anyway?") ]) or return;
-    }
-    if (my $part = find { $_->{mntpoint} && !maybeFormatted($_) } fs::get::fstab($all_hds)) {
-	$in->ask_okcancel('', N("You should format partition %s.
-Otherwise no entry for mount point %s will be written in fstab.
-Quit anyway?", $part->{device}, $part->{mntpoint})) or return if $::isStandalone;
-    }
-    foreach (@{$all_hds->{hds}}) {
-	if (!write_partitions($in, $_, 'skip_check_rebootNeeded')) {
-	    return if !$::isStandalone;
-	    $in->ask_yesorno(N("Quit without saving"), N("Quit without writing the partition table?"), 1) or return;
-	}
-    }
-    if (!$::isInstall) {
-	my $new = fs::fstab_to_string($all_hds);
-	if ($new ne $all_hds->{current_fstab} && $in->ask_yesorno('', N("Do you want to save /etc/fstab modifications"), 1)) {
-	    $all_hds->{current_fstab} = $new;
-	    fs::write_fstab($all_hds);
-	}
-	update_bootloader_for_renumbered_partitions($in, $all_hds);
-
-	if (any { $_->{rebootNeeded} } @{$all_hds->{hds}}) {
-	    $in->ask_warn('', N("You need to reboot for the partition table modifications to take place"));
-	    tell_wm_and_reboot();
-	}
-    }
-    1;
-}
-
-################################################################################
-# per-hd actions
-################################################################################
-sub hd_possible_actions {
-    my ($_in, $hd, $_all_hds) = @_;
-    ( 
-     if_(!$hd->{readonly} || $hd->{getting_rid_of_readonly_allowed}, N_("Clear all")), 
-     if_(!$hd->{readonly} && $::isInstall, N_("Auto allocate")),
-     N_("More"),
-    );
-}
-sub hd_possible_actions_interactive {
-    my ($_in, $_hd, $_all_hds) = @_;
-    &hd_possible_actions, N_("Hard drive information");
-}
-
-sub Clear_all {
-    my ($in, $hd, $all_hds) = @_;
-    return if is_xbox(); #- do not let them wipe the OS
-    my @parts = partition_table::get_normal_parts($hd);
-    foreach (@parts) {
-	RemoveFromLVM($in, $hd, $_, $all_hds) if isPartOfLVM($_);
-	RemoveFromRAID($in, $hd, $_, $all_hds) if isPartOfRAID($_);
-    }
-    if (isLVM($hd)) {
-	lvm::lv_delete($hd, $_) foreach @parts;
-    } else {
-	$hd->{readonly} = 0; #- give a way out of readonly-ness. only allowed when getting_rid_of_readonly_allowed
-	$hd->{getting_rid_of_readonly_allowed} = 0;
-	partition_table::raw::zero_MBR_and_dirty($hd);
-    }
-}
-
-sub Auto_allocate {
-    my ($in, $hd, $all_hds) = @_;
-    my $suggestions = partitions_suggestions($in) or return;
-
-    my %all_hds_ = %$all_hds;
-    $all_hds_{hds} = [ sort { $a == $hd ? -1 : 1 } @{$all_hds->{hds}} ];
-
-    eval { fsedit::auto_allocate(\%all_hds_, $suggestions) };
-    if ($@) {
-	$@ =~ /partition table already full/ or die;
-
-	$in->ask_warn("", [ 
-			   N("All primary partitions are used"),
-			   N("I can not add any more partitions"), 
-			   N("To have more partitions, please delete one to be able to create an extended partition"),
-			  ]);
-    }
-}
-
-sub More {
-    my ($in, $hd) = @_;
-
-    my %automounting = (
-	0 => N("No supermount"), 
-	1 => N("Supermount"),
-	magicdev => N("Supermount except for CDROM drives"),
-    );
-
-    my $r;
-    $in->ask_from('', '',
-	    [
-	     { val => N("Save partition table"),    clicked_may_quit => sub { SaveInFile($in, $hd);   1 } },
-	     { val => N("Restore partition table"), clicked_may_quit => sub { ReadFromFile($in, $hd); 1 } },
-	     { val => N("Rescue partition table"),  clicked_may_quit => sub { Rescuept($in, $hd);     1 } },
-	         if_($::isInstall, 
-	     { val => N("Reload partition table"), clicked_may_quit => sub { $r = 'force_reload'; 1 } }),
-	         if_($::isInstall || 1, 
-	     { label => N("Removable media automounting"), val => \$::o->{useSupermount}, 
-	       format => sub { $automounting{$_[0]} }, 
-	       list => [ 0, 'magicdev', 1 ], advanced => 1 },
-		 ),
-	    ],
-    ) && $r;
-}
-
-sub ReadFromFile {
-    my ($in, $hd) = @_;
-
-    my ($h, $file, $fh);
-    if ($::isStandalone) {
-	$file = $in->ask_filename({ title => N("Select file") }) or return;
-    } else {
-	undef $h; #- help perl_checker
-	my $name = $hd->{device}; $name =~ s!/!_!g;
-	($h, $fh) = install_any::media_browser($in, '', "part_$name") or return;
-    }
-
-    eval {
-    catch_cdie { partition_table::load($hd, $file || $fh) }
-      sub {
-	  $@ =~ /bad totalsectors/ or return;
-	  $in->ask_yesorno('',
-N("The backup partition table has not the same size
-Still continue?"), 0);
-      };
-    };
-    if (my $err = $@) {
-    	$in->ask_warn(N("Error"), formatError($err));
-    }
-}
-
-sub SaveInFile {
-    my ($in, $hd) = @_;
-
-    my ($h, $file) = ('', '');
-    if ($::isStandalone) {
-	$file = $in->ask_filename({ save => 1, title => N("Select file") }) or return;
-    } else {
-	undef $h; #- help perl_checker
-	my $name = $hd->{device}; $name =~ s!/!_!g;
-	($h, $file) = install_any::media_browser($in, 'save', "part_$name") or return;
-    }
-
-    eval { partition_table::save($hd, $file) };
-    if (my $err = $@) {
-    	$in->ask_warn(N("Error"), formatError($err));
-    }
-}
-
-sub Rescuept {
-    my ($in, $hd) = @_;
-    my $_w = $in->wait_message('', N("Trying to rescue partition table"));
-    fsedit::rescuept($hd);
-}
-
-sub Hd_info {
-    my ($in, $hd) = @_;
-    $in->ask_warn('', [ N("Detailed information"), format_hd_info($hd) ]);
-}
-
-################################################################################
-# per-part actions
-################################################################################
-
-sub part_possible_actions {
-    my ($_in, $hd, $part, $all_hds) = @_;
-    $part or return;
-
-    my %actions = my @l = (
-        N_("Mount point")      => '$part->{real_mntpoint} || (!isBusy && !isSwap && !isNonMountable)',
-        N_("Type")             => '!isBusy && $::expert && (!readonly || $part->{pt_type} == 0x83)',
-        N_("Options")          => '$::expert',
-        N_("Resize")	       => '!isBusy && !readonly && !isSpecial || isLVM($hd) && LVM_resizable',
-        N_("Format")           => '!isBusy && !readonly && ($::expert || $::isStandalone)',
-        N_("Mount")            => '!isBusy && (hasMntpoint || isSwap) && maybeFormatted && ($::expert || $::isStandalone)',
-        N_("Add to RAID")      => '!isBusy && isRawRAID && (!isSpecial || isRAID)',
-        N_("Add to LVM")       => '!isBusy && isRawLVM',
-        N_("Unmount")          => '!$part->{real_mntpoint} && isMounted',
-        N_("Delete")	       => '!isBusy && !readonly',
-        N_("Remove from RAID") => 'isPartOfRAID',
-        N_("Remove from LVM")  => 'isPartOfLVM',
-        N_("Modify RAID")      => 'canModifyRAID',
-        N_("Use for loopback") => '!$part->{real_mntpoint} && isMountableRW && !isSpecial && hasMntpoint && $::expert',
-    );
-    my ($actions_names) = list2kv(@l);
-    my $_all_hds = $all_hds; #- help perl_checker know the $all_hds *is* used in the macro below
-    my %macros = (
-	readonly => '$hd->{readonly}',
-        hasMntpoint => '$part->{mntpoint}',
-        isPrimary => 'isPrimary($part, $hd)',
-	LVM_resizable => '$part->{fs_type} eq "reiserfs" || (isMounted ? $part->{fs_type} eq "xfs" : $part->{fs_type} eq "ext3")',
-	canModifyRAID => 'isPartOfRAID($part) && !isMounted(fs::get::device2part($part->{raid}, $all_hds->{raids}))',
-    );
-    if (isEmpty($part)) {
-	if_(!$hd->{readonly}, N_("Create"));
-    } elsif ($part->{pt_type} == 0xbf) {
-        #- XBox OS partitions, do not allow anything
-        return;    
-    } else {
-        grep { 
-    	    my $cond = $actions{$_};
-    	    while (my ($k, $v) = each %macros) {
-    	        $cond =~ s/$k/qq(($v))/e;
-    	    }
-    	    $cond =~ s/(^|[^:\$]) \b ([a-z]\w{3,}) \b ($|[\s&\)])/$1 . $2 . '($part)' . $3/exg;
-    	    eval $cond;
-        } @$actions_names;
-    }
-}
-
-#- in case someone use diskdrake only to create partitions, 
-#- ie without assigning a mount point,
-#- do not suggest mount points anymore
-my $do_suggest_mount_point = 1;
-
-sub Create {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my ($def_start, $def_size, $max) = ($part->{start}, $part->{size}, $part->{start} + $part->{size});
-
-    $part->{maxsize} = $part->{size}; $part->{size} = 0;
-    if (fsedit::suggest_part($part, $all_hds)) {
-	$part->{mntpoint} = '' if !$do_suggest_mount_point;
-    } else {
-	$part->{size} = $part->{maxsize};
-	fs::type::suggest_fs_type($part, 'ext3');
-    }
-    if (isLVM($hd)) {
-	lvm::suggest_lv_name($hd, $part);
-    }
-
-    #- update adjustment for start and size, take into account the minimum partition size
-    #- including one less sector for start due to a capacity to increase the adjustement by
-    #- one.
-    my ($primaryOrExtended, $migrate_files);
-    my $type_name = fs::type::part2type_name($part);
-    my $mb_size = $part->{size} >> 11;
-    my $has_startsector = ($::expert || arch() !~ /i.86/) && !isLVM($hd);
-
-    $in->ask_from(N("Create a new partition"), '',
-        [
-           if_($has_startsector,
-         { label => N("Start sector: "), val => \$part->{start}, min => $def_start, max => ($max - min_partition_size($hd)), type => 'range' },
-           ),
-         { label => N("Size in MB: "), val => \$mb_size, min => min_partition_size($hd) >> 11, max => $def_size >> 11, type => 'range' },
-         { label => N("Filesystem type: "), val => \$type_name, list => [ fs::type::type_names() ], sort => 0 },
-         { label => N("Mount point: "), val => \$part->{mntpoint}, list => [ fsedit::suggestions_mntpoint($all_hds), '' ],
-           disabled => sub { my $p = fs::type::type_name2subpart($type_name); isSwap($p) || isNonMountable($p) }, type => 'combo', not_edit => 0,
-         },
-           if_($::expert && $hd->hasExtended,
-         { label => N("Preference: "), val => \$primaryOrExtended, list => [ '', "Extended", "Primary", if_($::expert, "Extended_0x85") ] },
-           ),
-	   if_($::expert && isLVM($hd),
-	 { label => N("Logical volume name "), val => \$part->{lv_name}, list => [ qw(root swap usr home var), '' ], sort => 0, not_edit => 0 },
-           ),
-        ], changed => sub {
-	    if ($part->{start} + ($mb_size << 11) > $max) {
-		if ($_[0] == 0) {
-		    # Start sector changed => restricting Size
-		    $mb_size = ($max - $part->{start}) >> 11; 
-		} else {
-		    # Size changed => restricting Start sector
-		    $part->{start} = $max - ($mb_size << 11); 
-		}
-	    }
-        }, complete => sub {
-	    $part->{size} = from_Mb($mb_size, min_partition_size($hd), $max - $part->{start}); #- need this to be able to get back the approximation of using MB
-	    put_in_hash($part, fs::type::type_name2subpart($type_name));
-	    $do_suggest_mount_point = 0 if !$part->{mntpoint};
-	    $part->{mntpoint} = '' if isNonMountable($part);
-	    $part->{mntpoint} = 'swap' if isSwap($part);
-	    fs::mount_options::set_default($part, ignore_is_removable => 1);
-
-	    check($in, $hd, $part, $all_hds) or return 1;
-	    $migrate_files = need_migration($in, $part->{mntpoint}) or return 1;
-	    
-	    my $seen;
-	    eval { 
-		catch_cdie { fsedit::add($hd, $part, $all_hds, { force => 1, primaryOrExtended => $primaryOrExtended }) }
-		  sub { $seen = 1; $in->ask_okcancel('', formatError($@)) };
-	    };
-	    if (my $err = $@) {
-		if ($err =~ /raw_add/ && $hd->hasExtended && !$hd->{primary}{extended}) {
-		    $in->ask_warn(N("Error"), N("You can not create a new partition
-(since you reached the maximal number of primary partitions).
-First remove a primary partition and create an extended partition."));
-		    return 0;
-		} else {
-		    $in->ask_warn(N("Error"), formatError($err)) if !$seen;
-		    return 1;
-		}
-	    }
-	    0;
-	},
-    ) or return;
-
-    warn_if_renumbered($in, $hd);
-
-    if ($migrate_files eq 'migrate') {
-	format_($in, $hd, $part, $all_hds) or return;
-	migrate_files($in, $hd, $part);
-	fs::mount_part($part);
-    }
-}
-
-sub Delete {
-    my ($in, $hd, $part, $all_hds) = @_;
-    if (isRAID($part)) {
-	raid::delete($all_hds->{raids}, $part);
-    } elsif (isLVM($hd)) {
-	lvm::lv_delete($hd, $part);
-    } elsif (isLoopback($part)) {
-	my $f = "$part->{loopback_device}{mntpoint}$part->{loopback_file}";
-	if (-e $f && $in->ask_yesorno('', N("Remove the loopback file?"))) {
-	    unlink $f;
-	}
-	my $l = $part->{loopback_device}{loopback};
-	@$l = grep { $_ != $part } @$l;
-	delete $part->{loopback_device}{loopback} if @$l == 0;
-	fsedit::recompute_loopbacks($all_hds);
-    } else {
-	if (arch() =~ /ppc/) {
-	    undef $partition_table::mac::bootstrap_part if isAppleBootstrap($part) && ($part->{device} = $partition_table::mac::bootstrap_part);
-	}
-	partition_table::remove($hd, $part);
-	warn_if_renumbered($in, $hd);
-    }
-}
-
-sub Type {
-    my ($in, $hd, $part) = @_;
-
-    my $warn = sub { ask_alldatawillbelost($in, $part, N_("After changing type of partition %s, all data on this partition will be lost")) };
-
-    #- for ext2, warn after choosing as ext2->ext3 can be achieved without loosing any data :)
-    $part->{fs_type} eq 'ext2' or $warn->() or return;
-
-    my @types = fs::type::type_names();
-
-    #- when readonly, Type() is allowed only when changing {fs_type} but not {pt_type}
-    #- eg: switching between ext2, ext3, reiserfs...
-    @types = grep { fs::type::type_name2pt_type($_) == $part->{pt_type} } @types if $hd->{readonly};
-
-    my $type_name = fs::type::part2type_name($part);
-    $in->ask_from_({ title => N("Change partition type"),
-		     messages => N("Which filesystem do you want?"),
-		     focus_first => 1,
-		   },
-		  [ { label => N("Type"), val => \$type_name, list => \@types, sort => 0, not_edit => !$::expert } ]) or return;
-
-    my $type = $type_name && fs::type::type_name2subpart($type_name);
-
-    if (member($type->{fs_type}, 'ext2', 'ext3')) {
-	my $_w = $in->wait_message('', N("Switching from ext2 to ext3"));
-	if (run_program::run("tune2fs", "-j", devices::make($part->{device}))) {
-	    put_in_hash($part, $type);
-	    set_isFormatted($part, 1); #- assume that if tune2fs works, partition is formatted
-
-	    #- disable the fsck (do not do it together with -j in case -j fails?)
-	    fs::format::disable_forced_fsck($part->{device});	    
-	    return;
-	}
-    }
-    #- either we switch to non-ext3 or switching losslessly to ext3 failed
-    $part->{fs_type} ne 'ext2' or $warn->() or return;
-
-    if (defined $type) {
-	check_type($in, $type, $hd, $part) and fsedit::change_type($type, $hd, $part);
-    }
-}
-
-sub Mount_point {
-    my ($in, $hd, $part, $all_hds) = @_;
-
-    my $migrate_files;
-    my $mntpoint = $part->{mntpoint} || do {
-	my $part_ = { %$part };
-	if (fsedit::suggest_part($part_, $all_hds)) {
-	    fs::get::has_mntpoint('/', $all_hds) || $part_->{mntpoint} eq '/boot' ? $part_->{mntpoint} : '/';
-	} else { '' }
-    };
-    $in->ask_from_({ messages =>
-        isLoopback($part) ? N("Where do you want to mount the loopback file %s?", $part->{loopback_file}) :
-			    N("Where do you want to mount device %s?", $part->{device}),
-		     focus_first => 1,
-		     callbacks => {
-		         complete => sub {
-	    !isPartOfLoopback($part) || $mntpoint or $in->ask_warn('', 
-N("Can not unset mount point as this partition is used for loop back.
-Remove the loopback first")), return 1;
-	    $part->{mntpoint} eq $mntpoint || check_mntpoint($in, $mntpoint, $part, $all_hds) or return 1;
-    	    $migrate_files = need_migration($in, $mntpoint) or return 1;
-	    0;
-	} },
-	},
-	[ { label => N("Mount point"), val => \$mntpoint, 
-	    list => [ uniq(if_($mntpoint, $mntpoint), fsedit::suggestions_mntpoint($all_hds), '') ], 
-	    not_edit => 0 } ],
-    ) or return;
-    $part->{mntpoint} = $mntpoint;
-
-    if ($migrate_files eq 'migrate') {
-	format_($in, $hd, $part, $all_hds) or return;
-	migrate_files($in, $hd, $part);
-	fs::mount_part($part);
-    }
-}
-sub Mount_point_raw_hd {
-    my ($in, $part, $all_hds, @propositions) = @_;
-
-    my $mntpoint = $part->{mntpoint} || shift @propositions;
-    $in->ask_from(
-        '',
-        N("Where do you want to mount %s?", $part->{device}),
-	[ { label => N("Mount point"), val => \$mntpoint, 
-	    list => [ if_($mntpoint, $mntpoint), '', @propositions ], 
-	    not_edit => 0 } ],
-	complete => sub {
-	    $part->{mntpoint} eq $mntpoint || check_mntpoint($in, $mntpoint, $part, $all_hds) or return 1;
-	    0;
-	}
-    ) or return;
-    $part->{mntpoint} = $mntpoint;
-}
-
-sub Resize {
-    my ($in, $hd, $part) = @_;
-    my (%nice_resize, $block_count, $free_block, $block_size);
-    my ($min, $max) = (min_partition_size($hd), partition_table::next_start($hd, $part) - $part->{start});
-
-    if (maybeFormatted($part)) {
-	# here we may have a non-formatted or a formatted partition
-	# -> doing as if it was formatted
-
-	if ($part->{fs_type} eq 'vfat') {
-	    write_partitions($in, $hd) or return;
-	    #- try to resize without losing data
-	    my $_w = $in->wait_message(N("Resizing"), N("Computing FAT filesystem bounds"));
-
-	    require resize_fat::main;
-	    $nice_resize{fat} = resize_fat::main->new($part->{device}, devices::make($part->{device}));
-	    $min = max($min, $nice_resize{fat}->min_size);
-	    $max = min($max, $nice_resize{fat}->max_size);	    
-	} elsif (member($part->{fs_type}, 'ext2', 'ext3')) {
-	    write_partitions($in, $hd) or return;
-	    my $dev = devices::make($part->{device});
-	    my $r = run_program::get_stdout('dumpe2fs', $dev);
-	    $r =~ /Block count:\s*(\d+)/ and $block_count = $1;
-	    $r =~ /Free blocks:\s*(\d+)/ and $free_block = $1;
-	    $r =~ /Block size:\s*(\d+)/ and $block_size = $1;
-	    log::l("dumpe2fs $nice_resize{ext2} gives: Block_count=$block_count, Free_blocks=$free_block, Block_size=$block_size");
-	    if ($block_count && $free_block && $block_size) {
-		$min = max($min, ($block_count - $free_block) * ($block_size / 512));
-		$nice_resize{ext2} = $dev;
-	    }
-	} elsif ($part->{fs_type} eq 'ntfs') {
-	    write_partitions($in, $hd) or return;
-	    require diskdrake::resize_ntfs;
-	    diskdrake::resize_ntfs::check_prog($in) or return;
-	    $nice_resize{ntfs} = diskdrake::resize_ntfs->new($part->{device}, devices::make($part->{device}));
-	    $min = $nice_resize{ntfs}->min_size or delete $nice_resize{ntfs};
-	} elsif ($part->{fs_type} eq 'reiserfs') {
-	    write_partitions($in, $hd) or return;
-	    if ($part->{isMounted}) {
-		$nice_resize{reiserfs} = 1;		  
-		$min = $part->{size}; #- ensure the user can only increase
-	    } elsif (defined(my $free = fs::df($part))) {
-		$nice_resize{reiserfs} = 1;		  
-		$min = max($min, $part->{size} - $free);
-	    }
-	} elsif ($part->{fs_type} eq 'xfs' && isLVM($hd) && $::isStandalone && $part->{isMounted}) {
-	    $min = $part->{size}; #- ensure the user can only increase
-	    $nice_resize{xfs} = 1;
-	}
-	#- make sure that even after normalizing the size to cylinder boundaries, the minimun will be saved,
-	#- this save at least a cylinder (less than 8Mb).
-	$min += partition_table::raw::cylinder_size($hd);
-	$min >= $max and return $in->ask_warn('', N("This partition is not resizeable"));
-
-	#- for these, we have tools to resize partition table
-	#- without losing data (or at least we hope so :-)
-	if (%nice_resize) {
-	    ask_alldatamaybelost($in, $part, N_("All data on this partition should be backed-up")) or return;
-	} else {
-	    ask_alldatawillbelost($in, $part, N_("After resizing partition %s, all data on this partition will be lost")) or return;
-	}
-    }
-
-    my $mb_size = $part->{size} >> 11;
-    $in->ask_from(N("Resize"), N("Choose the new size"), [ 
-		   { label => N("New size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
-		]) or return;
-
-
-    my $size = from_Mb($mb_size, $min, $max);
-    $part->{size} == $size and return;
-
-    my $oldsize = $part->{size};
-    $part->{size} = $size;
-    $hd->adjustEnd($part);
-
-    undef $@;
-    my $_b = before_leaving { $@ and $part->{size} = $oldsize };
-
-    my $adjust = sub {
-	my ($write_partitions) = @_;
-
-	if (isLVM($hd)) {
-	    lvm::lv_resize($part, $oldsize);
-	} else {
-	    partition_table::will_tell_kernel($hd, resize => $part);
-	    partition_table::adjust_local_extended($hd, $part);
-	    partition_table::adjust_main_extended($hd);
-	    write_partitions($in, $hd) or return if $write_partitions && %nice_resize;
-	}
-	1;
-    };
-
-    $adjust->(1) or return if $size > $oldsize;
-
-    my $wait = $in->wait_message(N("Resizing"), '');
-
-    if ($nice_resize{fat}) {
-	local *log::l = sub { $wait->set(join(' ', @_)) };
-	$nice_resize{fat}->resize($part->{size});
-    } elsif ($nice_resize{ext2}) {
-	my $s = int($part->{size} / ($block_size / 512));
-	log::l("resize2fs $nice_resize{ext2} to size $s in block of $block_size bytes");
-	run_program::run("resize2fs", "-pf", $nice_resize{ext2}, $s);
-    } elsif ($nice_resize{ntfs}) {
-	log::l("ntfs resize to $part->{size} sectors");
-	$nice_resize{ntfs}->resize($part->{size});
-	$wait = undef;
-	$in->ask_warn('', N("To ensure data integrity after resizing the partition(s), 
-filesystem checks will be run on your next boot into Windows(TM)"));
-    } elsif ($nice_resize{reiserfs}) {
-	log::l("reiser resize to $part->{size} sectors");
-	run_program::run('resize_reiserfs', '-f', '-q', '-s' . int($part->{size}/2) . 'K', devices::make($part->{device}));
-    } elsif ($nice_resize{xfs}) {
-	#- happens only with mounted LVM, see above
-	run_program::run("xfs_growfs", $part->{mntpoint});
-    }
-
-    if (%nice_resize) {
-	set_isFormatted($part, 1);
-    } else {
-	set_isFormatted($part, 0);
-	partition_table::verifyParts($hd);
-	$part->{mntpoint} = '' if isNonMountable($part); #- mainly for ntfs, which we can not format
-    }
-
-    $adjust->(0) if $size < $oldsize;
-}
-sub Format {
-    my ($in, $hd, $part, $all_hds) = @_;
-    format_($in, $hd, $part, $all_hds);
-}
-sub Mount {
-    my ($in, $hd, $part) = @_;
-    write_partitions($in, $hd) or return;
-    my $w;
-    fs::mount_part($part, $::prefix, 0, sub {
-        	my ($msg) = @_;
-        	$w ||= $in->wait_message('', $msg);
-        	$w->set($msg);
-    });
-}
-sub Add2RAID {
-    my ($in, $_hd, $part, $all_hds) = @_;
-    my $raids = $all_hds->{raids};
-
-    my $md_part = $in->ask_from_listf('', N("Choose an existing RAID to add to"),
-				      sub { ref($_[0]) ? $_[0]{device} : $_[0] },
-				      [ @$raids, N_("new") ]) or return;
-
-    if (ref($md_part)) {
-	raid::add($md_part, $part);
-    } else {
-	raid::check_prog($in) or return;
-	my $md_part = raid::new($raids, disks => [ $part ]);
-	modifyRAID($in, $raids, $md_part) or return raid::delete($raids, $md_part);
-    }
-}
-sub Add2LVM {
-    my ($in, $hd, $part, $all_hds) = @_;
-    my $lvms = $all_hds->{lvms};
-    write_partitions($in, $_) or return foreach isRAID($part) ? @{$all_hds->{hds}} : $hd;
-
-    my $lvm = $in->ask_from_listf_('', N("Choose an existing LVM to add to"),
-				  sub { ref($_[0]) ? $_[0]{VG_name} : $_[0] },
-				  [ @$lvms, N_("new") ]) or return;
-    require lvm;
-    if (!ref $lvm) {
-	# create new lvm
-	my $name = $in->ask_from_entry('', N("LVM name?")) or return;
-	$lvm = new lvm($name);
-	push @$lvms, $lvm;
-    }
-    raid::make($all_hds->{raids}, $part) if isRAID($part);
-    $part->{lvm} = $lvm->{VG_name};
-    push @{$lvm->{disks}}, $part;
-    delete $part->{mntpoint};
-
-    lvm::check($in) if $::isStandalone;
-    lvm::vg_add($part);
-    lvm::update_size($lvm);
-}
-sub Unmount {
-    my ($_in, $_hd, $part) = @_;
-    fs::umount_part($part);
-}
-sub RemoveFromRAID { 
-    my ($_in, $_hd, $part, $all_hds) = @_;
-    raid::removeDisk($all_hds->{raids}, $part);
-}
-sub RemoveFromLVM {
-    my ($_in, $_hd, $part, $all_hds) = @_;
-    isPartOfLVM($part) or die;
-    my ($lvm, $other_lvms) = partition { $_->{VG_name} eq $part->{lvm} } @{$all_hds->{lvms}};
-    lvm::vg_destroy($lvm->[0]);
-    $all_hds->{lvms} = $other_lvms;
-}
-sub ModifyRAID { 
-    my ($in, $_hd, $part, $all_hds) = @_;
-    modifyRAID($in, $all_hds->{raids}, fs::get::device2part($part->{raid}, $all_hds->{raids}));
-}
-sub Loopback {
-    my ($in, $hd, $real_part, $all_hds) = @_;
-
-    write_partitions($in, $hd) or return;
-
-    my $handle = any::inspect($real_part) or $in->ask_warn('', N("This partition can not be used for loopback")), return;
-
-    my ($min, $max) = (1, loopback::getFree($handle->{dir}, $real_part));
-    $max = min($max, 1 << (31 - 9)) if $real_part->{fs_type} eq 'vfat'; #- FAT does not handle file size bigger than 2GB
-    my $part = { maxsize => $max, size => 0, loopback_device => $real_part, notFormatted => 1 };
-    if (!fsedit::suggest_part($part, $all_hds)) {
-	$part->{size} = $part->{maxsize};
-	fs::type::suggest_fs_type($part, 'ext3');
-    }
-    delete $part->{mntpoint}; # we do not want the suggested mntpoint
-
-    my $type_name = fs::type::part2type_name($part);
-    my $mb_size = $part->{size} >> 11;
-    $in->ask_from(N("Loopback"), '', [
-		  { label => N("Loopback file name: "), val => \$part->{loopback_file} },
-		  { label => N("Size in MB: "), val => \$mb_size, min => $min >> 11, max => $max >> 11, type => 'range' },
-		  { label => N("Filesystem type: "), val => \$type_name, list => [ fs::type::type_names() ], not_edit => !$::expert, sort => 0 },
-             ],
-	     complete => sub {
-		 $part->{loopback_file} or $in->ask_warn('', N("Give a file name")), return 1, 0;
-		 $part->{loopback_file} =~ s|^([^/])|/$1|;
-		 if (my $size = loopback::verifFile($handle->{dir}, $part->{loopback_file}, $real_part)) {
-		     $size == -1 and $in->ask_warn('', N("File is already used by another loopback, choose another one")), return 1, 0;
-		     $in->ask_yesorno('', N("File already exists. Use it?")) or return 1, 0;
-		     delete $part->{notFormatted};
-		     $part->{size} = divide($size, 512);
-		 } else {
-		     $part->{size} = from_Mb($mb_size, $min, $max);
-		 }
-		 0;
-	     }) or return;
-    put_in_hash($part, fs::type::type_name2subpart($type_name));
-    push @{$real_part->{loopback}}, $part;
-    fsedit::recompute_loopbacks($all_hds);
-}
-
-sub Options {
-    my ($in, $hd, $part, $all_hds) = @_;
-
-    my @simple_options = qw(user noauto supermount username= password=);
-
-    my (undef, $user_implies) = fs::mount_options::list();
-    my ($options, $unknown) = fs::mount_options::unpack($part);
-    my %help = fs::mount_options::help();
-
-    my $prev_user = $options->{user};
-    $in->ask_from(N("Mount options"),
-		  '',
-		  [ 
-		   (map { 
-			 { label => $_, text => scalar warp_text(formatAlaTeX($help{$_})), val => \$options->{$_}, hidden => scalar(/password/),
-			   advanced => !$part->{rootDevice} && !member($_, @simple_options), if_(!/=$/, type => 'bool') };
-		     } keys %$options),
-		    { label => N("Various"), val => \$unknown, advanced => 1 },
-		  ],
-		  changed => sub {
-		      if ($prev_user != $options->{user}) {
-			  $prev_user = $options->{user};
-			  $options->{$_} = $options->{user} foreach @$user_implies;
-		      }
-		      if ($options->{encrypted}) {
-			  # modify $part->{options} for the check
-			  local $part->{options};
-			  fs::mount_options::pack($part, $options, $unknown);
-			  if (!check($in, $hd, $part, $all_hds)) {
-			      $options->{encrypted} = 0;
-			  } elsif (!$part->{encrypt_key} && !isSwap($part)) {
-			      if (my ($encrypt_key, $encrypt_algo) = choose_encrypt_key($in, $options)) {
-				  $options->{'encryption='} = $encrypt_algo;
-				  $part->{encrypt_key} = $encrypt_key;
-			      } else {
-				  $options->{encrypted} = 0;
-			      }
-			  }
-		      } else {
-			  delete $options->{'encryption='};
-			  delete $part->{encrypt_key};
-		      }
-		  },
-		 ) or return;
-
-    fs::mount_options::pack($part, $options, $unknown);
-    1;
-}
-
-
-{ 
-    no strict; 
-    *{'Toggle to normal mode'} = sub() { $::expert = 0 };
-    *{'Toggle to expert mode'} = sub() { $::expert = 1 };
-    *{'Clear all'} = \&Clear_all;
-    *{'Auto allocate'} = \&Auto_allocate;
-    *{'Mount point'} = \&Mount_point;
-    *{'Modify RAID'} = \&ModifyRAID;
-    *{'Add to RAID'} = \&Add2RAID;
-    *{'Remove from RAID'} = \&RemoveFromRAID; 
-    *{'Add to LVM'} = \&Add2LVM;
-    *{'Remove from LVM'} = \&RemoveFromLVM; 
-    *{'Use for loopback'} = \&Loopback;
-    *{'Hard drive information'} = \&Hd_info;
-}
-
-
-################################################################################
-# helpers
-################################################################################
-
-sub is_part_existing {
-    my ($part, $all_hds) = @_;
-    $part && any { fsedit::are_same_partitions($part, $_) } fs::get::fstab_and_holes($all_hds);
-}
-
-sub modifyRAID {
-    my ($in, $raids, $md_part) = @_;
-    my $new_device = $md_part->{device};
-    $in->ask_from('', '',
-		  [
-{ label => N("device"), val => \$new_device, list => [ $md_part->{device}, raid::free_mds($raids) ], sort => 0 },
-{ label => N("level"), val => \$md_part->{level}, list => [ qw(0 1 4 5 linear) ] },
-{ label => N("chunk size in KiB"), val => \$md_part->{'chunk-size'} },
-		  ],
-		 ) or return;
-    raid::change_device($md_part, $new_device);
-    raid::updateSize($md_part); # changing the raid level changes the size available
-    1;
-}
-
-
-sub ask_alldatamaybelost {
-    my ($in, $part, $msg) = @_;
-
-    maybeFormatted($part) or return 1;
-
-    #- here we may have a non-formatted or a formatted partition
-    #- -> doing as if it was formatted
-    $in->ask_okcancel(N("Read carefully!"), 
-		      [ N("Be careful: this operation is dangerous."), sprintf(translate($msg), $part->{device}) ], 1);
-}
-sub ask_alldatawillbelost {
-    my ($in, $part, $msg) = @_;
-
-    maybeFormatted($part) or return 1;
-
-    #- here we may have a non-formatted or a formatted partition
-    #- -> doing as if it was formatted
-    $in->ask_okcancel(N("Read carefully!"), sprintf(translate($msg), $part->{device}), 1);
-}
-
-sub partitions_suggestions {
-    my ($in) = @_;
-    my $t = $::expert ? 
-      $in->ask_from_list_('', N("What type of partitioning?"), [ keys %fsedit::suggestions ]) :
-      'simple';
-    $fsedit::suggestions{$t};
-}
-
-sub check_type {
-    my ($in, $type, $hd, $part) = @_;
-    eval { fs::type::check($type->{fs_type}, $hd, $part) };
-    if (my $err = $@) {
-	$in->ask_warn('', formatError($err));
-	return;
-    }
-    if ($::isStandalone && $type->{fs_type}) {
-	fs::format::check_package_is_installed($in->do_pkgs, $type->{fs_type}) or return;
-    }
-    1;
-}
-sub check_mntpoint {
-    my ($in, $mntpoint, $part, $all_hds) = @_;
-    my $seen;
-    eval { 
-	catch_cdie { fsedit::check_mntpoint($mntpoint, $part, $all_hds) }
-	  sub { $seen = 1; $in->ask_okcancel('', formatError($@)) };
-    };
-    if (my $err = $@) {
-	$in->ask_warn('', formatError($err)) if !$seen;
-	return;
-    }
-    1;
-}
-sub check {
-    my ($in, $hd, $part, $all_hds) = @_;
-    check_type($in, $part, $hd, $part) &&
-      check_mntpoint($in, $part->{mntpoint}, $part, $all_hds);
-}
-
-sub check_rebootNeeded {
-    my ($_in, $hd) = @_;
-    $hd->{rebootNeeded} and die N("You'll need to reboot before the modification can take place");
-}
-
-sub write_partitions {
-    my ($in, $hd, $b_skip_check_rebootNeeded) = @_;
-    check_rebootNeeded($in, $hd) if !$b_skip_check_rebootNeeded;
-    $hd->{isDirty} or return 1;
-    isLVM($hd) and return 1;
-
-    $in->ask_okcancel(N("Read carefully!"), N("Partition table of drive %s is going to be written to disk!", $hd->{device}), 1) or return;
-    partition_table::write($hd) if !$::testing;
-    check_rebootNeeded($in, $hd) if !$b_skip_check_rebootNeeded;
-    1;
-}
-
-sub unmount {
-    my ($_hd, $part) = @_;
-    fs::umount_part($part);
-}
-sub format_ {
-    my ($in, $hd, $part, $all_hds) = @_;
-    write_partitions($in, $_) or return foreach isRAID($part) ? @{$all_hds->{hds}} : $hd;
-    ask_alldatawillbelost($in, $part, N_("After formatting partition %s, all data on this partition will be lost")) or return;
-    if ($::isStandalone) {
-	fs::format::check_package_is_installed($in->do_pkgs, $part->{fs_type}) or return;
-    }
-    $part->{isFormatted} = 0; #- force format;
-    my ($_w, $wait_message) = fs::format::wait_message($in);
-    fs::format::part($all_hds->{raids}, $part, $::prefix, $wait_message);
-    1;
-}
-
-sub need_migration {
-    my ($in, $mntpoint) = @_;
-
-    my @l = grep { $_ ne "lost+found" } all($mntpoint);
-    if (@l && $::isStandalone) {
-	my $choice;
-	my @choices = (N_("Move files to the new partition"), N_("Hide files"));
-	$in->ask_from('', N("Directory %s already contains data\n(%s)", $mntpoint, formatList(5, @l)), 
-		      [ { val => \$choice, list => \@choices, type => 'list' } ]) or return;
-	$choice eq $choices[0] ? 'migrate' : 'hide';
-    } else {
-	'hide';
-    }    
-}
-
-sub migrate_files {
-    my ($in, $_hd, $part) = @_;
-
-    my $wait = $in->wait_message('', N("Moving files to the new partition"));
-    my $handle = any::inspect($part, '', 'rw');
-    my @l = glob_("$part->{mntpoint}/*");
-    foreach (@l) {
-	$wait->set(N("Copying %s", $_)); 
-	system("cp", "-a", $_, $handle->{dir}) == 0 or die "copying failed";
-    }
-    foreach (@l) {
-	$wait->set(N("Removing %s", $_)); 
-	system("rm", "-rf", $_) == 0 or die "removing files failed";
-    }
-}
-
-sub warn_if_renumbered {
-    my ($in, $hd) = @_;
-    my $l = delete $hd->{partitionsRenumbered};
-    return if is_empty_array_ref($l);
-
-    push @{$hd->{allPartitionsRenumbered}}, @$l;
-
-    my @l = map { 
-	my ($old, $new) = @$_;
-	N("partition %s is now known as %s", $old, $new) } @$l;
-    $in->ask_warn('', join("\n", N("Partitions have been renumbered: "), @l));
-}
-
-#- unit of $mb is mega bytes, min and max are in sectors, this
-#- function is used to convert back to sectors count the size of
-#- a partition ($mb) given from the interface (on Resize or Create).
-#- modified to take into account a true bounding with min and max.
-sub from_Mb {
-    my ($mb, $min, $max) = @_;
-    $mb <= $min >> 11 and return $min;
-    $mb >= $max >> 11 and return $max;
-    $mb * 2048;
-}
-
-sub format_part_info {
-    my ($hd, $part) = @_;
-
-    my $info = '';
-
-    $info .= N("Mount point: ") . "$part->{mntpoint}\n" if $part->{mntpoint};
-    $info .= N("Device: ") . "$part->{device}\n" if $part->{device} && !isLoopback($part);
-    $info .= N("Devfs name: ") . "$part->{devfs_device}\n" if $part->{devfs_device} && $::expert;
-    $info .= N("Volume label: ") . "$part->{device_LABEL}\n" if $part->{device_LABEL} && $::expert;
-    $info .= N("DOS drive letter: %s (just a guess)\n", $part->{device_windobe}) if $part->{device_windobe};
-    if (arch() eq "ppc") {
-	my $pType = $part->{pType};
-	$pType =~ s/[^A-Za-z0-9_]//g;
-	$info .= N("Type: ") . $pType . ($::expert ? sprintf " (0x%x)", $part->{pt_type} : '') . "\n";
-	if (defined $part->{pName}) {
-	    my $pName = $part->{pName};
-	    $pName =~ s/[^A-Za-z0-9_]//g;
-	    $info .= N("Name: ") . $pName . "\n";
-	}
-    } elsif (isEmpty($part)) {
-	$info .= N("Empty") . "\n";
-    } else {
-	$info .= N("Type: ") . (fs::type::part2type_name($part) || $part->{fs_type}) . ($::expert ? sprintf " (0x%x)", $part->{pt_type} : '') . "\n";
-    }
-    $info .= N("Start: sector %s\n", $part->{start}) if $::expert && !isSpecial($part) && !isLVM($hd);
-    $info .= N("Size: %s", formatXiB($part->{size}, 512));
-    $info .= sprintf " (%s%%)", int 100 * $part->{size} / $hd->{totalsectors} if $hd->{totalsectors};
-    $info .= N(", %s sectors", $part->{size}) if $::expert;
-    $info .= "\n";
-    $info .= N("Cylinder %d to %d\n", $part->{start} / $hd->cylinder_size, ($part->{start} + $part->{size} - 1) / $hd->cylinder_size) if ($::expert || isEmpty($part)) && !isSpecial($part) && !isLVM($hd);
-    $info .= N("Number of logical extents: %d\n", $part->{size} / $hd->cylinder_size) if $::expert && isLVM($hd);
-    $info .= N("Formatted\n") if $part->{isFormatted};
-    $info .= N("Not formatted\n") if !$part->{isFormatted} && $part->{notFormatted};
-    $info .= N("Mounted\n") if $part->{isMounted};
-    $info .= N("RAID %s\n", $part->{raid}) if isPartOfRAID($part);
-    $info .= sprintf "LVM %s\n", $part->{lvm} if isPartOfLVM($part);
-    $info .= N("Loopback file(s):\n   %s\n", join(", ", map { $_->{loopback_file} } @{$part->{loopback}})) if isPartOfLoopback($part);
-    $info .= N("Partition booted by default\n    (for MS-DOS boot, not for lilo)\n") if $part->{active} && $::expert;
-    if (isRAID($part)) {
-	$info .= N("Level %s\n", $part->{level});
-	$info .= N("Chunk size %d KiB\n", $part->{'chunk-size'});
-	$info .= N("RAID-disks %s\n", join ", ", map { $_->{device} } @{$part->{disks}});
-    } elsif (isLoopback($part)) {
-	$info .= N("Loopback file name: %s", $part->{loopback_file});
-    }
-    if (isApple($part)) {
-	$info .= N("\nChances are, this partition is\na Driver partition. You should\nprobably leave it alone.\n");
-    }
-    if (isAppleBootstrap($part)) {
-	$info .= N("\nThis special Bootstrap\npartition is for\ndual-booting your system.\n");
-    }
-    # restrict the length of the lines
-    $info =~ s/(.{60}).*/$1.../mg;
-    $info;
-}
-
-sub format_part_info_short { 
-    my ($hd, $part) = @_;
-    isEmpty($part) ? format_part_info($hd, $part) : partition_table::description($part);
-}
-
-sub format_hd_info {
-    my ($hd) = @_;
-
-    my $info = '';
-    $info .= N("Device: ") . "$hd->{device}\n";
-    $info .= N("Read-only") . "\n" if $hd->{readonly};
-    $info .= N("Size: %s\n", formatXiB($hd->{totalsectors}, 512)) if $hd->{totalsectors};
-    $info .= N("Geometry: %s cylinders, %s heads, %s sectors\n", $hd->{geom}{cylinders}, $hd->{geom}{heads}, $hd->{geom}{sectors}) if $::expert && $hd->{geom};
-    $info .= N("Info: ") . ($hd->{info} || $hd->{media_type}) . "\n" if $::expert && ($hd->{info} || $hd->{media_type});
-    $info .= N("LVM-disks %s\n", join ", ", map { $_->{device} } @{$hd->{disks}}) if isLVM($hd) && $hd->{disks};
-    $info .= N("Partition table type: %s\n", $1) if $::expert && ref($hd) =~ /_([^_]+)$/;
-    $info .= N("on channel %d id %d\n", $hd->{channel}, $hd->{id}) if $::expert && exists $hd->{channel};
-    $info;
-}
-
-sub format_raw_hd_info {
-    my ($raw_hd) = @_;
-
-    my $info = '';
-    $info .= N("Mount point: ") . "$raw_hd->{mntpoint}\n" if $raw_hd->{mntpoint};
-    $info .= format_hd_info($raw_hd);
-    if (!isEmpty($raw_hd)) {
-	$info .= N("Type: ") . (fs::type::part2type_name($raw_hd) || $raw_hd->{fs_type}) . "\n";
-    }
-    if (my $s = $raw_hd->{options}) {
-	$s =~ s/password=([^\s,]*)/'password=' . ('x' x length($1))/e;
-	$info .= N("Options: %s", $s);
-    }
-    $info;
-}
-
-#- get the minimal size of partition in sectors to help diskdrake on
-#- limit cases, include a cylinder + start of a eventually following
-#- logical partition.
-sub min_partition_size { $_[0]->cylinder_size + 2*$_[0]{geom}{sectors} }
-
-
-sub choose_encrypt_key {
-    my ($in, $options) = @_;
-
-    my ($encrypt_key, $encrypt_key2);
-    my @algorithms = map { "AES$_" } 128, 196, 256, 512, 1024, 2048;
-    my $encrypt_algo = $options->{'encryption='} || "AES128";
-
-    $in->ask_from_(
-		       {
-         title => N("Filesystem encryption key"), 
-	 messages => N("Choose your filesystem encryption key"),
-	 callbacks => { 
-	     complete => sub {
-		 length $encrypt_key < 6 and $in->ask_warn('', N("This encryption key is too simple (must be at least %d characters long)", 6)), return 1,0;
-		 $encrypt_key eq $encrypt_key2 or $in->ask_warn('', [ N("The encryption keys do not match"), N("Please try again") ]), return 1,1;
-		 return 0;
-        } } }, [
-{ label => N("Encryption key"), val => \$encrypt_key,  hidden => 1 },
-{ label => N("Encryption key (again)"), val => \$encrypt_key2, hidden => 1 },
-{ label => N("Encryption algorithm"), type => 'list', val => \$encrypt_algo, list => \@algorithms }
-    ]) && ($encrypt_key, $encrypt_algo);
-}
-
-
-sub tell_wm_and_reboot() {
-    my ($wm, $pid) = any::running_window_manager();
-
-    if (!$wm) {
-	system('reboot');
-    } else {    
-	any::ask_window_manager_to_logout_then_do($wm, $pid, 'reboot');
-    }
-}
-
-sub update_bootloader_for_renumbered_partitions {
-    my ($in, $all_hds) = @_;
-    my @renumbering = map { @{$_->{allPartitionsRenumbered} || []} } @{$all_hds->{hds}} or return;
-
-    require bootloader;
-    bootloader::update_for_renumbered_partitions($in, \@renumbering, $all_hds);
-}
diff --git a/perl-install/diskdrake/removable.pm b/perl-install/diskdrake/removable.pm
deleted file mode 100644
index 14eb26772..000000000
--- a/perl-install/diskdrake/removable.pm
+++ /dev/null
@@ -1,52 +0,0 @@
-package diskdrake::removable; # $Id$
-
-use diagnostics;
-use strict;
-use diskdrake::interactive;
-use common;
-use fs;
-
-sub main {
-    my ($in, $all_hds, $raw_hd) = @_;
-    my %actions = my @actions = actions();
-    my $action;
-    while ($action ne 'Done') {
-	$action = $in->ask_from_list_('', 
-					 diskdrake::interactive::format_raw_hd_info($raw_hd), 
-					 [ map { $_->[0] } group_by2 @actions ], 'Done') or return;
-	$actions{$action}->($in, $raw_hd, $all_hds);
-    }
-}
-
-sub actions() {
-    (
-     N_("Mount point") => \&mount_point,
-     N_("Options") => \&options,
-     N_("Type") => \&type,
-     N_("Done") => \&done,
-    );
-}
-
-sub done {
-    my ($in, $_raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Done($in, $all_hds);
-}
-sub options {
-    my ($in, $raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Options($in, {}, $raw_hd, $all_hds);
-}
-sub mount_point { 
-    my ($in, $raw_hd, $all_hds) = @_;
-    diskdrake::interactive::Mount_point_raw_hd($in, $raw_hd, $all_hds, "/mnt/$raw_hd->{device}");
-}
-sub type {
-    my ($in, $raw_hd) = @_;
-    my @fs = ('auto', fs::auto_fs());
-    my $fs_type = $raw_hd->{fs_type};
-    $in->ask_from(N("Change type"),
-			      N("Which filesystem do you want?"),
-			      [ { label => N("Type"), val => \$fs_type, list => [@fs], not_edit => !$::expert } ]) or return;
-    $raw_hd->{fs_type} = $fs_type;
-}
-
-1;
diff --git a/perl-install/diskdrake/resize_ntfs.pm b/perl-install/diskdrake/resize_ntfs.pm
deleted file mode 100644
index 5af20f273..000000000
--- a/perl-install/diskdrake/resize_ntfs.pm
+++ /dev/null
@@ -1,35 +0,0 @@
-package diskdrake::resize_ntfs;
-
-use diagnostics;
-use strict;
-
-use run_program;
-use common;
-
-
-sub new {
-    my ($type, $_device, $dev) = @_;
-    bless { dev => $dev }, $type;
-}
-
-sub check_prog {
-    my ($in) = @_;
-    $::isInstall || $in->do_pkgs->ensure_binary_is_installed('ntfsprogs', 'ntfsresize');
-}
-
-sub min_size {
-    my ($o) = @_;
-    my $r;
-    run_program::run('ntfsresize', '>', \$r, '-f', '-i', $o->{dev}) or die "ntfsresize failed:\n$r\n";
-    $r =~ /minimal size: (\d+) KiB/ && $1 * 2; 
-}
-
-sub resize {
-    my ($o, $size) = @_;
-    my @l = ('-ff', '-s' . int($size / 2) . 'ki', $o->{dev});
-    my $r;
-    run_program::run('ntfsresize', '>', \$r, '-n', @l) or die "ntfsresize failed: $r\n";
-    run_program::run('ntfsresize', '>', \$r, @l) or die "ntfsresize failed: $r\n";
-}
-
-1;
diff --git a/perl-install/diskdrake/smbnfs_gtk.pm b/perl-install/diskdrake/smbnfs_gtk.pm
deleted file mode 100644
index 69c9517a6..000000000
--- a/perl-install/diskdrake/smbnfs_gtk.pm
+++ /dev/null
@@ -1,270 +0,0 @@
-package diskdrake::smbnfs_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use any;
-use fs::get;
-use diskdrake::interactive;
-use common;
-use interactive;
-use network::smb;
-use network::nfs;
-use ugtk2 qw(:helpers :wrappers :create);
-
-my ($all_hds, $in, $tree_model, $current_entry, $current_leaf, %icons);
-
-sub main {
-    ($in, $all_hds, my $type) = @_;
-    my ($kind) = $type eq 'smb' ? smb2kind() : nfs2kind();
-    $kind->check($in) or return;
-
-    my $w = ugtk2->new('DiskDrake');
-
-    add_smbnfs($w->{window}, $kind);
-    $w->{rwindow}->set_default_size(400, 300) if $w->{rwindow}->can('set_default_size');
-    $w->{window}->show_all;
-    $w->main;
-}
-
-################################################################################
-# nfs/smb: helpers
-################################################################################
-sub try {
-    my ($kind, $name, @args) = @_;
-    my $f = $diskdrake::interactive::{$name} or die "unknown function $name";
-    try_($kind, $name, \&$f, @args);
-}
-sub try_ {
-    my ($kind, $name, $f, @args) = @_;
-    eval { $f->($in, @args, $all_hds) };
-    if (my $err = $@) {
-	$in->ask_warn(N("Error"), formatError($err));
-    }
-    update($kind);
-    Gtk2->main_quit if member($name, 'Cancel', 'Done');
-}
-
-sub raw_hd_options {
-    my ($in, $raw_hd) = @_;
-    diskdrake::interactive::Options($in, {}, $raw_hd, fs::get::empty_all_hds());
-}
-sub raw_hd_mount_point {
-    my ($in, $raw_hd) = @_;
-    my ($default) = $raw_hd->{device} =~ m|([^/]+)$|;
-    $default =~ s/\s+/-/g;
-    diskdrake::interactive::Mount_point_raw_hd($in, $raw_hd, $all_hds, "/mnt/$default");
-}
-
-sub per_entry_info_box {
-    my ($box, $kind, $entry) = @_;
-    my $info = $entry ? diskdrake::interactive::format_raw_hd_info($entry) : '';
-    $kind->{per_entry_info_box}->destroy if $kind->{per_entry_info_box};
-    gtkpack($box, $kind->{per_entry_info_box} = gtkadd(Gtk2::Frame->new(N("Details")), gtkset_justify(Gtk2::Label->new($info), 'left')));
-}
-
-sub per_entry_action_box {
-    my ($box, $kind, $entry) = @_;
-    $_->destroy foreach $box->get_children;
-
-    my @buttons;
-
-    push @buttons, map {
-	  my $s = $_;
-	  gtksignal_connect(Gtk2::Button->new(translate($s)), clicked => sub { try($kind, $s, {}, $entry) });
-      } (if_($entry->{isMounted}, N_("Unmount")),
-	 if_($entry->{mntpoint} && !$entry->{isMounted}, N_("Mount"))) if $entry;
-
-    my @l = (
-	     if_($entry, N_("Mount point") => \&raw_hd_mount_point),
-	     if_($entry && $entry->{mntpoint}, N_("Options") => \&raw_hd_options),
-	     N_("Cancel") => sub {},
-	     N_("Done") => \&done,
-	    );
-    push @buttons, map {
-        my ($txt, $f) = @$_;
-        $f ? gtksignal_connect(Gtk2::Button->new(translate($txt)), clicked => sub { try_($kind, $txt, $f, $entry) })
-          : Gtk2::Label->new("");
-    } group_by2(@l);
-    
-    gtkadd($box, gtkpack(Gtk2::HBox->new(0,0), @buttons));
-}
-
-sub done {
-    my ($in) = @_;
-    diskdrake::interactive::Done($in, $all_hds);
-}
-
-sub export_icon {
-    my ($entry) = @_;
-    $entry ||= {};
-    $icons{$entry->{isMounted} ? 'mounted' : $entry->{mntpoint} ? 'has_mntpoint' : 'default'};
-}
-
-sub update {
-    my ($kind) = @_;
-    per_entry_action_box($kind->{action_box}, $kind, $current_entry);
-    per_entry_info_box($kind->{info_box}, $kind, $current_entry);
-    $tree_model->set($current_leaf, 0 => export_icon($current_entry)) if $current_entry;
-}
-
-sub find_fstab_entry {
-    my ($kind, $e, $b_add_or_not) = @_;
-
-    my $fs_entry = $kind->to_fstab_entry($e);
-
-    if (my $fs_entry_ = find { $fs_entry->{device} eq $_->{device} } @{$kind->{val}}) {
-	$fs_entry_;
-    } elsif ($b_add_or_not) {
-	push @{$kind->{val}}, $fs_entry;
-	$fs_entry;
-    } else {
-	undef;
-    }
-}
-
-sub import_tree {
-    my ($kind, $info_box) = @_;
-    my (%servers_displayed, %wservers, %wexports);
-
-    $tree_model = Gtk2::TreeStore->new("Gtk2::Gdk::Pixbuf", "Glib::String");
-    my $tree = Gtk2::TreeView->new_with_model($tree_model);
-    $tree->get_selection->set_mode('browse');
-
-    my $col = Gtk2::TreeViewColumn->new;
-    $col->pack_start(my $pixrender = Gtk2::CellRendererPixbuf->new, 0);
-    $col->add_attribute($pixrender, 'pixbuf', 0);
-    $col->pack_start(my $texrender = Gtk2::CellRendererText->new, 1);
-    $col->add_attribute($texrender, 'text', 1);
-    $tree->append_column($col);
-
-    $tree->set_headers_visible(0);
-
-    foreach ('default', 'server', 'has_mntpoint', 'mounted') {
-	$icons{$_} = gtkcreate_pixbuf("smbnfs_$_");
-    }
-
-    my $add_server = sub {
-	my ($server) = @_;
-	my $name = $server->{name} || $server->{ip};
-	$servers_displayed{$name} ||= do {
-	    my $w = $tree_model->append_set(undef, [ 0 => $icons{server}, 1 => $name ]);
-	    $wservers{$tree_model->get_path_str($w)} = $server;
-	    $w;
-	};
-    };
-
-    my $find_exports; $find_exports = sub {
-	my ($server) = @_;
-	my @l = eval { $kind->find_exports($server) };
-	return @l if !$@;
-
-	if ($server->{username}) {
-	    $in->ask_warn('', N("Can not login using username %s (bad password?)", $server->{username}));
-	    network::smb::remove_bad_credentials($server);
-	} else {
-	    if (my @l = network::smb::authentications_available($server)) {
-		my $user = $in->ask_from_list_(N("Domain Authentication Required"),
-					       N("Which username"), [ @l, N_("Another one") ]) or return;
-		if ($user ne 'Another one') {
-		    network::smb::read_credentials($server, $user);
-		    goto $find_exports;
-		}
-	    }
-	}
-
-	if ($in->ask_from(N("Domain Authentication Required"),
-		      N("Please enter your username, password and domain name to access this host."),
-		      [ 
-		       { label => N("Username"), val => \$server->{username} },
-		       { label => N("Password"), val => \$server->{password}, hidden => 1 },
-		       { label => N("Domain"), val => \$server->{domain} },
-		      ])) {
-	    goto $find_exports;
-	} else {
-	    delete $server->{username};
-	    ();
-	}	
-    };
-
-    my $add_exports = sub {
-	my ($node) = @_;
-
-	my $path = $tree_model->get_path($node);
-	$tree->expand_row($path, 0);
-
-	foreach ($find_exports->($wservers{$tree_model->get_path_str($node)} || return)) { #- can not die here since insert_node provoque a tree_select_row before the %wservers is filled
-	    my $s = $kind->to_string($_);
-	    my $w = $tree_model->append_set($node, [ 0 => export_icon(find_fstab_entry($kind, $_)), 
-						     1 => $s ]);
-	    $wexports{$tree_model->get_path_str($w)} = $_;
-	}
-    };
-
-    { 
-	my $search = Gtk2::Button->new(N("Search servers"));
-	gtkpack__($info_box, 
-		  gtksignal_connect($search,
-				    clicked => sub {
-					$add_server->($_) foreach sort { $a->{name} cmp $b->{name} } $kind->find_servers;
-					$search->set_label(N("Search new servers"));
-				    }));
-    }
-
-    foreach (uniq(map { ($kind->from_dev($_->{device}))[0] } @{$kind->{val}})) {
-	my $node = $add_server->({ name => $_ });
-	$add_exports->($node);
-    }
-
-    $tree->get_selection->signal_connect(changed => sub {
-	my ($_model, $curr) = $_[0]->get_selected;
-	$curr or return;
-
-	if ($tree_model->iter_parent($curr)) {
-	    $current_leaf = $curr;
-	    $current_entry = find_fstab_entry($kind, $wexports{$tree_model->get_path_str($curr)} || die(''), 'add');
-	} else {
-	    if (!$tree_model->iter_has_child($curr)) {
-		gtkset_mousecursor_wait($tree->window);
-		ugtk2::flush();
-		$add_exports->($curr);		
-		gtkset_mousecursor_normal($tree->window);
-	    }
-	    $current_entry = undef;
-	}
-	update($kind);
-    });
-    $tree;
-}
-
-sub add_smbnfs {
-    my ($widget, $kind) = @_;
-    die if $kind->{main_box};
-
-    $kind->{info_box} = Gtk2::VBox->new(0,0);
-    $kind->{display_box} = create_scrolled_window(import_tree($kind, $kind->{info_box}));
-    $kind->{action_box} = Gtk2::HBox->new(0,0);
-    $kind->{main_box} =
-      gtkpack_(Gtk2::VBox->new(0,7),
-	       1, gtkpack(Gtk2::HBox->new(0,7),
-			  gtkset_size_request($kind->{display_box}, 200, 0),
-			  $kind->{info_box}),
-	       0, $kind->{action_box},
-	     );
-
-    $widget->add($kind->{main_box});
-    $current_entry = undef;
-    update($kind);
-    $kind;
-}
-
-sub nfs2kind() {
-    network::nfs->new({ type => 'nfs', name => 'NFS', val => $all_hds->{nfss}, no_auto => 1 });
-}
-
-sub smb2kind() {
-    network::smb->new({ type => 'smb', name => 'Samba', val => $all_hds->{smbs}, no_auto => 1 });
-}
-
-
-1;
diff --git a/perl-install/do_pkgs.pm b/perl-install/do_pkgs.pm
deleted file mode 100644
index f8ed44028..000000000
--- a/perl-install/do_pkgs.pm
+++ /dev/null
@@ -1,238 +0,0 @@
-package do_pkgs; # $Id$
-
-sub do_pkgs {
-    my ($in) = @_;
-    ($::isInstall ? 'do_pkgs_during_install' : 'do_pkgs_standalone')->new($in);
-}
-
-################################################################################
-package do_pkgs_common;
-use common;
-
-sub ensure_is_installed {
-    my ($do, $pkg, $o_file, $b_auto) = @_;
-
-    if (! $o_file || ! -e "$::prefix$o_file") {
-	$do->in->ask_okcancel('', N("The package %s needs to be installed. Do you want to install it?", $pkg), 1) 
-	  or return if !$b_auto;
-	$do->install($pkg) or return;
-    }
-    if ($o_file && ! -e "$::prefix$o_file") {
-	$do->in->ask_warn('', N("Mandatory package %s is missing", $pkg));
-	return;
-    }
-    1;
-}
-
-sub ensure_binary_is_installed {
-    my ($do, $pkg, $binary, $b_auto) = @_;
-
-    if (!whereis_binary($binary, $::prefix)) {
-	$do->in->ask_okcancel('', N("The package %s needs to be installed. Do you want to install it?", $pkg), 1) 
-	  or return if !$b_auto;
-	$do->install($pkg) or return;
-    }
-    if (!whereis_binary($binary, $::prefix)) {
-	$do->in->ask_warn('', N("Mandatory package %s is missing", $pkg));
-	return;
-    }
-    1;
-}
-
-sub ensure_is_installed_if_available {
-    my ($do, $pkg, $file) = @_;
-    if (-e "$::prefix$file" || $::testing) {
-	1;
-    } else {
-        $do->what_provides($pkg) && $do->install($pkg);
-    }
-}
-
-sub is_available {
-    my ($do, $name) = @_;
-    $do->are_available($name);
-}
-
-sub is_installed {
-    my ($do, $name) = @_;
-    $do->are_installed($name);
-}
-
-sub check_kernel_module_packages {
-    my ($do, $base_name, $o_ext_name) = @_;
-    
-    require bootloader;
-    my ($short_name) = $base_name =~ /^(.*)-kernel$/;
-    my @rpms = $do->are_available("dkms-$short_name",
-                                  map {
-                                      $base_name . '-' . bootloader::vmlinuz2version($_);
-                                  } bootloader::installed_vmlinuz());
-    my @ext = $o_ext_name ? $do->are_available($o_ext_name) : ();
-
-    log::l("found kernel module packages $_") foreach @rpms, @ext;
-
-    #- we want at least a kernel package and the ext package if specified
-    @rpms && (!$o_ext_name || @ext) && [ @rpms, @ext ];
-}
-
-################################################################################
-package do_pkgs_during_install;
-use run_program;
-use common;
-
-our @ISA = qw(do_pkgs_common);
-
-sub new {
-    my ($type, $in) = @_;
-    require pkgs;
-    bless { in => $in, o => $::o }, $type;
-}
-
-sub in {
-    my ($do) = @_;
-    $do->{in};
-}
-
-sub install {
-    my ($do, @l) = @_;
-    log::l("do_pkgs_during_install::install");
-    if ($::testing || $::globetrotter) {
-	log::l("i would install packages " . join(' ', @l));
-	return 1;
-    } else {
-	$do->{o}->pkg_install(@l);
-    }
-}
-
-sub what_provides {
-    my ($do, $name) = @_;
-    map { $_->name } pkgs::packagesProviding($do->{o}{packages}, $name);
-}
-
-sub are_available {
-    my ($do, @pkgs) = @_;
-    grep { pkgs::packageByName($do->{o}{packages}, $_) } @pkgs;
-}
-
-sub are_installed {
-    my ($do, @l) = @_;
-    grep {
-	my $p = pkgs::packageByName($do->{o}{packages}, $_);
-	$p && $p->flag_available;
-    } @l;
-}
-
-sub remove {
-    my ($do, @l) = @_;
-
-    @l = grep {
-	my $p = pkgs::packageByName($do->{o}{packages}, $_);
-	pkgs::unselectPackage($do->{o}{packages}, $p) if $p;
-	$p;
-    } @l;
-    run_program::rooted($::prefix, 'rpm', '-e', @l);
-}
-
-sub remove_nodeps {
-    my ($do, @l) = @_;
-
-    @l = grep {
-	my $p = pkgs::packageByName($do->{o}{packages}, $_);
-	if ($p) {
-	    $p->set_flag_requested(0);
-	    $p->set_flag_required(0);
-	}
-	$p;
-    } @l;
-    run_program::rooted($::prefix, 'rpm', '-e', '--nodeps', @l);
-}
-
-################################################################################
-package do_pkgs_standalone;
-use run_program;
-use common;
-use log;
-
-our @ISA = qw(do_pkgs_common);
-
-sub new {
-    my ($type, $o_in) = @_;
-    bless { in => $o_in }, $type;
-}
-
-sub in {
-    my ($do) = @_;
-    $do->{in} ||= do {
-	require interactive;
-	interactive->vnew;
-    };
-    $do->{in};
-}
-
-sub install {
-    my ($do, @l) = @_;
-
-    return 1 if listlength(are_installed($do, @l)) == @l;
-
-    if ($::testing) {
-	log::l("i would install packages " . join(' ', @l));
-	return 1;
-    }
-
-    my $_wait = $do->in->wait_message('', N("Installing packages..."));
-    $do->in->suspend;
-    log::explanations("installed packages @l");
-    #- --expect-install added in urpmi 4.6.11
-    my $ret = system('urpmi', '--allow-medium-change', '--auto', '--no-verify-rpm', '--gui', '--expect-install', @l) == 0;
-    $do->in->resume;
-    $ret;
-}
-
-sub are_available {
-    my ($_do, @pkgs) = @_;
-    my %pkgs = map { $_ => 1 } @pkgs;
-
-    eval {
-	local *_;
-	require urpm;
-	my $urpm = urpm->new;
-	$urpm->read_config(nocheck_access => 1);
-	foreach (grep { !$_->{ignore} } @{$urpm->{media} || []}) {
-	    $urpm->parse_synthesis("$urpm->{statedir}/synthesis.$_->{hdlist}");
-	}
-	map { $_->name } grep { $pkgs{$_->name} } @{$urpm->{depslist} || []};
-    };
-    
-}
-
-sub what_provides {
-    my ($_do, $name) = @_;
-    split('\|', chomp_(run_program::get_stdout('urpmq', $name)));
-}
-
-sub is_installed {
-    my ($do, $name) = @_;
-    are_installed($do, $name);
-}
-
-sub are_installed {
-    my ($_do, @l) = @_;
-    my @l2;
-    run_program::run('/bin/rpm', '>', \@l2, '-q', '--qf', "%{name}\n", @l); #- do not care about the return value
-    intersection(\@l, [ chomp_(@l2) ]); #- can not return directly @l2 since it contains things like "package xxx is not installed"
-}
-
-sub remove {
-    my ($do, @l) = @_;
-    my $_wait = $do->in->wait_message('', N("Removing packages..."));
-    $do->in->suspend;
-    log::explanations("removed packages @l");
-    my $ret = system('rpm', '-e', @l) == 0;
-    $do->in->resume;
-    $ret;
-}
-
-sub remove_nodeps {
-    my ($do, @l) = @_;
-    remove($do, '--nodeps', @l) == 0;
-}
diff --git a/perl-install/drakxtools.spec b/perl-install/drakxtools.spec
deleted file mode 100644
index f33f5650c..000000000
--- a/perl-install/drakxtools.spec
+++ /dev/null
@@ -1,5784 +0,0 @@
-Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
-Name:    drakxtools
-Version: 10.3
-Release: 0.17mdk
-Url: http://www.mandrivalinux.com/en/drakx.php3
-Source0: %name-%version.tar.bz2
-License: GPL
-Group: System/Configuration/Other
-Requires: %{name}-newt = %version-%release, perl-Gtk2 >= 1.072-1mdk, perl-Glib >= 1.072-1mdk, /usr/X11R6/bin/xtest, font-tools, usermode >= 1.63-5mdk, perl-MDK-Common >= 1.1.18-1mdk, mandrake-doc-common >= 9.2-5mdk
-Requires: foomatic-db-engine
-Requires: drakconf-icons
-Conflicts: drakconf < 10.1-0.6mdk
-Conflicts: rpmdrake < 2.1-29mdk
-Conflicts: mandrake_doc-drakxtools-en < 9.2, mandrake_doc-drakxtools-es < 9.2, mandrake_doc-drakxtools-fr < 9.2
-Conflicts: bootloader-utils < 1.8-4mdk, bootsplash < 2.1.7-1mdk
-BuildRequires: gettext, gtk+2-devel, ldetect-devel >= 0.5.3-1mdk, ncurses-devel, newt-devel, perl-devel >= 1:5.8.0-20mdk, libext2fs-devel, perl-MDK-Common-devel >= 1.1.8-3mdk
-BuildRequires: rpm-devel
-BuildRoot: %_tmppath/%name-buildroot
-Provides: draksec
-Obsoletes: draksec
-%define _requires_exceptions perl(Net::FTP)\\|perl(Time::localtime)\\|perl(URPM)
-
-%package newt
-Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
-Group: System/Configuration/Other
-Requires: perl-base >= 2:5.8.6-1mdk, urpmi >= 4.6.13, modutils >= 2.3.11, usermode-consoleonly >= 1.44-4mdk, msec >= 0.38-5mdk
-Requires: %{name}-backend = %version-%release
-Requires: monitor-edid
-Requires: netprofile
-Obsoletes: diskdrake kbdconfig mouseconfig printtool setuptool drakfloppy
-Provides: diskdrake, kbdconfig mouseconfig printtool setuptool, drakfloppy = %version-%release
-Provides: perl(Newt::Newt)
-Provides: perl(network::isdn_consts)
-
-%package backend
-Summary: Drakxtools libraries and background tools 
-Group: System/Configuration/Other
-Requires: ldetect-lst >= 0.1.71
-Requires: dmidecode
-Conflicts: drakxtools-newt < 10-51mdk
-
-
-%package http
-Summary: The drakxtools via http
-Group: System/Configuration/Other
-Requires: %{name}-newt = %version-%release, perl-Net_SSLeay >= 1.22-1mdk, perl-Authen-PAM >= 0.14-1mdk, perl-CGI >= 2.91-1mdk
-PreReq: rpm-helper
-
-%package -n drakx-finish-install
-Summary: First boot configuration
-Group: System/Configuration/Other
-Requires: %{name} = %version-%release
-
-%package -n harddrake
-Summary: Main Hardware Configuration/Information Tool
-Group: System/Configuration/Hardware
-Requires: %{name}-newt = %version-%release
-Requires: hwdb-clients
-Obsoletes: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-Provides: kudzu, kudzu-devel, libdetect0, libdetect0-devel, libdetect-lst, libdetect-lst-devel, detect, detect-lst
-Prereq: rpm-helper
-
-%package -n harddrake-ui
-Summary: Main Hardware Configuration/Information Tool
-Group: System/Configuration/Hardware
-Requires: %name = %version-%release
-Requires: sane-backends
-
-%description
-Contains many Mandrivalinux applications simplifying users and
-administrators life on a Mandrivalinux machine. Nearly all of
-them work both under XFree (graphical environment) and in console
-(text environment), allowing easy distant work.
-
-drakbug: interactive bug report tool
-
-drakbug_report: help find bugs in DrakX
-
-drakclock: date & time configurator
-
-drakfloppy: boot disk creator
-
-drakfont: import fonts in the system
-
-draklog: show extracted information from the system logs
-
-draknet_monitor: connection monitoring
-
-drakperm: msec GUI (permissions configurator)
-
-drakprinter: detect and configure your printer
-
-draksec: security options managment / msec frontend
-
-draksplash: bootsplash themes creation
-
-drakTermServ: terminal server configurator
-
-listsupportedprinters: list printers
-
-net_applet: applet to check network connection
-
-%description backend
-See package %name
-
-%description newt
-Contains many Mandrivalinux applications simplifying users and
-administrators life on a Mandrivalinux machine. Nearly all of
-them work both under XFree (graphical environment) and in console
-(text environment), allowing easy distant work.
-
-adduserdrake: help you adding a user
-
-diskdrake: DiskDrake makes hard disk partitioning easier. It is
-graphical, simple and powerful. Different skill levels are available
-(newbie, advanced user, expert). It's written entirely in Perl and
-Perl/Gtk. It uses resize_fat which is a perl rewrite of the work of
-Andrew Clausen (libresize).
-
-drakauth: configure authentification (LDAP/NIS/...)
-
-drakautoinst: help you configure an automatic installation replay
-
-drakbackup: backup and restore your system
-
-drakboot: configures your boot configuration (Lilo/GRUB,
-Bootsplash, X, autologin)
-
-drakconnect: LAN/Internet connection configuration. It handles
-ethernet, ISDN, DSL, cable, modem.
-
-drakfirewall: simple firewall configurator
-
-drakgw: internet connection sharing
-
-drakkeyboard: configure your keyboard (both console and X)
-
-draklocale: language configurator, available both for root
-(system wide) and users (user only)
-
-drakmouse: autodetect and configure your mouse
-
-drakproxy: proxies configuration
-
-drakscanner: scanner configurator
-
-draksound: sound card configuration
-
-drakx11: menu-driven program which walks you through setting up
-your X server; it autodetects both monitor and video card if
-possible
-
-drakxservices: SysV services and daemons configurator
-
-drakxtv: auto configure tv card for xawtv grabber
-
-lsnetdrake: display available nfs and smb shares
-
-lspcidrake: display your pci information, *and* the corresponding
-kernel module
-
-%description http
-This add the capability to be runned behind a web server to the drakx tools.
-See package %name
-
-
-%description -n drakx-finish-install
-For OEM-like duplications, it allows at first boot:
-- network configuration
-- creating users
-- setting root password
-- choosing authentication
-
-
-%description -n harddrake
-The harddrake service is a hardware probing tool run at system boot
-time to determine what hardware has been added or removed from the
-system.
-It then offer to run needed config tool to update the OS
-configuration.
-
-
-%description -n harddrake-ui
-This is the main configuration tool for hardware that calls all the
-other configuration tools.
-It offers a nice GUI that show the hardware configuration splitted by
-hardware classes.
-
-
-%prep
-%setup -q
-
-%build
-%make CFLAGS="$RPM_OPT_FLAGS"
-
-%install
-rm -rf $RPM_BUILD_ROOT
-
-%make PREFIX=$RPM_BUILD_ROOT install
-mkdir -p $RPM_BUILD_ROOT/{%_initrddir,%_sysconfdir/{X11/xinit.d,sysconfig/harddrake2}}
-touch $RPM_BUILD_ROOT/etc/sysconfig/harddrake2/previous_hw
-
-dirs1="usr/lib/libDrakX usr/share/libDrakX"
-(cd $RPM_BUILD_ROOT ; find $dirs1 usr/bin usr/sbin ! -type d -printf "/%%p\n")|egrep -v 'bin/.*harddrake' > %{name}.list
-(cd $RPM_BUILD_ROOT ; find $dirs1 -type d -printf "%%%%dir /%%p\n") >> %{name}.list
-
-perl -ni -e '/activefw\.pm|clock|drak(backup|bug|clock|floppy|font|log|net_monitor|perm|printer|sec|splash|TermServ)|gtk|icons|logdrake|net_applet|net_monitor|pixmaps|printer|roam|xf86misc|\.png$/ ? print STDERR $_ : print' %{name}.list 2> %{name}-gtk.list
-perl -ni -e '/http/ ? print STDERR $_ : print' %{name}.list 2> %{name}-http.list
-perl -ni -e 'm!lib/libDrakX|bootloader-config|fileshare|lsnetdrake|drakupdate_fstab|rpcinfo|serial_probe! && !/newt/i ? print STDERR $_ : print' %{name}.list 2> %{name}-backend.list
-
-#mdk menu entry
-mkdir -p $RPM_BUILD_ROOT/%_menudir
-
-cat > $RPM_BUILD_ROOT%_menudir/drakxtools-newt <<EOF
-?package(drakxtools-newt): \
-	needs="X11" \
-	section="System/Configuration/Other" \
-	title="LocaleDrake (System)" \
-	longtitle="System wide language configurator" \
-	command="/usr/bin/drakconf --start-with=Localization" \
-	icon="localedrake.png"
-
-?package(drakxtools-newt): \
-	needs="X11" \
-	section="System/Configuration/Other" \
-	title="LocaleDrake (User)" \
-	longtitle="Language configurator" \
-	command="/usr/bin/localedrake" \
-	icon="localedrake.png"
-
-EOF
- 
-cat > $RPM_BUILD_ROOT%_menudir/harddrake-ui <<EOF
-?package(harddrake-ui):\
-	needs="X11"\
-	section="Configuration/Hardware"\
-	title="HardDrake"\
-	longtitle="Hardware Central Configuration/information tool"\
-	command="/usr/sbin/harddrake2"\
-	icon="harddrake.png"
-EOF
-
-cat > $RPM_BUILD_ROOT%_menudir/net_applet <<EOF
-?package(drakxtools):\
-        needs="X11"\
-        section="System/Monitoring"\
-        title="NetApplet"\
-        longtitle="Network monitoring applet"\
-        command="/usr/bin/net_applet --force"\
-        icon="/usr/share/libDrakX/pixmaps/connected.png"
-EOF
-
-cat > $RPM_BUILD_ROOT%_sysconfdir/X11/xinit.d/harddrake2 <<EOF
-#!/bin/sh
-exec /usr/share/harddrake/service_harddrake X11
-EOF
-
-cat > $RPM_BUILD_ROOT%_sysconfdir/X11/xinit.d/net_applet <<EOF
-#!/bin/sh
-DESKTOP=\$1
-case \$DESKTOP in
-   KDE|GNOME|IceWM|Fluxbox|XFce4) exec /usr/bin/net_applet;;
-esac
-EOF
-
-mv $RPM_BUILD_ROOT%_sbindir/service_harddrake_confirm $RPM_BUILD_ROOT%_datadir/harddrake/confirm
-
-chmod +x $RPM_BUILD_ROOT{%_datadir/harddrake/*,%_sysconfdir/X11/xinit.d/{harddrake2,net_applet}}
-# temporary fix until we reenable this feature
-rm -f $RPM_BUILD_ROOT%_sysconfdir/X11/xinit.d/harddrake2
-
-%find_lang libDrakX
-cat libDrakX.lang >> %name.list
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-%update_menus
-[[ ! -e %_sbindir/kbdconfig ]] && %__ln_s -f keyboarddrake %_sbindir/kbdconfig
-[[ ! -e %_sbindir/mouseconfig ]] && %__ln_s -f mousedrake %_sbindir/mouseconfig
-[[ ! -e %_bindir/printtool ]] && %__ln_s -f ../sbin/printerdrake %_bindir/printtool
-:
-
-%postun
-%clean_menus
-for i in %_sbindir/kbdconfig %_sbindir/mouseconfig %_bindir/printtool;do
-    [[ -L $i ]] && %__rm -f $i
-done
-:
-
-%post http
-%_post_service drakxtools_http
-
-%preun http
-%_preun_service drakxtools_http
-
-%post newt
-%update_menus
-
-%postun newt
-%clean_menus
-
-%post -n harddrake-ui
-%update_menus
-
-%postun -n harddrake-ui
-%clean_menus
-
-%post -n harddrake
-%_post_service harddrake
-
-%preun -n harddrake
-%_preun_service harddrake
-
-%postun -n harddrake
-file /etc/sysconfig/harddrake2/previous_hw | fgrep -q perl && %_datadir/harddrake/convert || :
-
-%files backend -f %{name}-backend.list
-%defattr(-,root,root)
-%config(noreplace) /etc/security/fileshare.conf
-%attr(4755,root,root) %_sbindir/fileshareset
-
-%files newt -f %name.list
-%defattr(-,root,root)
-%_menudir/drakxtools-newt
-%doc diskdrake/diskdrake.html
-%_iconsdir/localedrake.png
-%_iconsdir/large/localedrake.png
-%_iconsdir/mini/localedrake.png
-%_mandir/*/*
-
-%files -f %{name}-gtk.list
-%defattr(-,root,root)
-/usr/X11R6/bin/*
-%_sysconfdir/X11/xinit.d/net_applet
-%_menudir/net_applet
-
-%files -n harddrake
-%defattr(-,root,root)
-%config(noreplace) %_initrddir/harddrake
-%dir /etc/sysconfig/harddrake2/
-%config(noreplace) /etc/sysconfig/harddrake2/previous_hw
-%dir %_datadir/harddrake/
-%_datadir/harddrake/*
-#%_sysconfdir/X11/xinit.d/harddrake2
-
-%files -n harddrake-ui
-%defattr(-,root,root)
-%dir /etc/sysconfig/harddrake2/
-%_sbindir/harddrake2
-%_datadir/pixmaps/harddrake2
-%_menudir/harddrake-ui
-%_iconsdir/large/harddrake.png
-%_iconsdir/mini/harddrake.png
-%_iconsdir/harddrake.png
-
-%files -n drakx-finish-install
-%defattr(-,root,root)
-%config(noreplace) %_sysconfdir/sysconfig/finish-install
-%_sysconfdir/X11/xsetup.d/finish-install.xsetup
-%_sbindir/finish-install
-
-%files http -f %{name}-http.list
-%defattr(-,root,root)
-%dir %_sysconfdir/drakxtools_http
-%config(noreplace) %_sysconfdir/pam.d/miniserv
-%config(noreplace) %_sysconfdir/init.d/drakxtools_http
-%config(noreplace) %_sysconfdir/drakxtools_http/conf
-%config(noreplace) %_sysconfdir/drakxtools_http/authorised_progs
-%config(noreplace) %_sysconfdir/logrotate.d/drakxtools-http
-
-%changelog
-* Tue May 24 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.17mdk
-- drakgw (blino):
-  o wizardify
-  o allow not to enable DNS, dhcpd and proxy servers
-  o allow not to enable CUPS broadcast
-  o use network interfaces instead of network addresses in CUPS
-    configuration
-- harddrake: use mousedrake to configure tablets & touchscreens
-
-* Sun May 22 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.16mdk
-- interactive layer: fix canceling managment in text mode
-- XFdrake: only run ldconfig if needed (aka only if GL config was
-  altered), thus speeding up auto-config of X in harddrake service
-- fix joystick detection (pixel, #16099)
-
-* Thu May 19 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.15mdk
-- drakconnect, harddrake: detect all ADSL modems of each kind
-- harddrake GUI:
-  o detect yet more webcams and USB audio devices
-  o DVB support:
-    * list DVB cards in their own category
-    * install needed packages for DVB
-  o list tablets and touchscreens in their own category
-  o fix detecting joysticks
-  o really list ATM devices
-- harddrake service: install/remove DVB drivers if needed
-
-* Thu May 19 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.14mdk
-- interactive layer: handle canceling wizards in text mode
-- hardware support:
-  o detect more webcams
-  o detect more ADSL USB modems (needs further drakconnect work)
-- harddrake:
-  o create new categories for USB audio, ATM, Bluetooth, WAN, and radio devices
-  o split joysticks category into real joystick and gameport controller ones
-- localedrake: clarify "other countries" vs "advanced" label depending if the
-  language is spoken in several countries and if the language needs an IM method
-
-* Tue May 17 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.13mdk
-- drakboot (blino):
-  o add the "Create new theme" button back
-  o allow to choose between "text only", "verbose" and "silent"
-    bootsplash modes
-- drakconnect (blino):
-  o use iwpriv for WPA with rt2x00 drivers (since they don't support
-    wpa_supplicant)
-  o keep # and * characters in phone number (#16031)
-- drakroam:
-  o fix perms on /etc/wlandetect.conf (#16020)
-  o really write waproamd config files (blino)
-
-* Mon May 16 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.12mdk
-- fix GtkTextView wrapper
-- drakups: do not detect MS joystick as UPS (#15930)
-
-* Thu May 12 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.11mdk
-- diskdrake: default to "Custom" when group fileshare exists (pixel, #15917)
-- drakbackup (stew):
-  o drop webdav support (can be mounted as a normal net filesystem
-    these days)
-  o remove translation on "tape" media selection (#15437)
-  o rework .backupignore handling (#12352)
-- drakconnect: netconnect.pm: reorder drakconnect first screen (blino)
-- drakups: fix detecting Wingman gamepad as UPS (#15750)
-- harddrake: ensure wait message is centered on mcc
-- harddrake service: fix PCMCIA breakage (#15742)
-- fix serial controllers detection (#15457)
-
-* Tue May 10 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.10mdk
-- draksplash (blino):
-  o improved layout (separate window for image previews, notebook to
-    split silent/verbose/console settings)
-  o update scale factors when the theme name is changed too
-  o use default jpeg image path in config file for both silent and
-    verbose images
-  o force the exact image size when writing a theme
-  o write bootsplash v3 configuration files (progress bar still
-    missing)
-  o allow to modify progress bar and console box by dragging the mouse
-  o really get default vga mode
-  o shrink preview window on resolution change
-  o handle both silent and verbose images
-- localedrake (UTUMI Hirosi):
-  o add support for iiimf
-  o do not install anymore uim-anthy for japanese users
-
-* Wed May  4 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.9mdk
-- diskdrake (pixel):
-  o fix displaying number of logical extents
-  o allow resizing ext3 LV if not mounted
-  o allow resizing reiserfs LV even if not mounted
-- drakbackup (stew):
-  o clarify quota message, optional delete old backups (#15066)
-  o optional mail "From" address (#15293)
-  o fix automagic addition of /root to backups when not desired
-- drakconnect (blino):
-  o ask wireless settings before boot protocol selection
-  o remove useless warning in install, we never override configuration (#10827)
-- draksplash (blino):
-  o fix theme creation
-  o preview theme in real time, cleanups
-  o use default values for scale settings
-  o draw a cross inside the text box
-- drakTermServ (stew):
-  o update for new etherboot
-  o predict NBI disk space usage and check
-  o catch failed NBI creation (#13902)
-  o catch failed dhcpd.conf creation (#13943)
-  o misc small bug fixes
-
-* Mon May  2 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.8mdk
-- ensure most sub dialogs reuse the icon of their main window
-- drakboot: improve layout
-- drakconnect: fix USB devices detection for ndiswrapper (blino)
-- harddrake: fix SATA & hw RAID detection (detect them pior to detecting PATA)
-
-* Fri Apr 29 2005 Thierry Vignaud <tvignaud@mandriva.com> 10.3-0.7mdk
-- drakconnect (blino):
-  o don't write /etc/ppp/options anymore, adjust options in peer files
-  o display VPI/VCI values in decimal
-  o configure pppoe connections in a ppp peer file
-- drakroam (blino):
-  o do not write blank ESSID
-  o exit and warn when no wireless interface is found (#15244)
-- drakups: do not detect IR devices as UPSes (#15495)
-- XFdrake: if one prefer using "Modes" instead of "Virtual", keep it
-  as is (pixel)
-
-* Mon Apr 25 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.3-0.6mdk
-- drakconnect (blino):
-  o fix WPA key (#15621)
-  o allow to disable WPA even if no key is used
-  o handle errors in wireless packages installation
-- drakroam: fix Signal Quality parsing (blino)
-
-* Thu Apr 21 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.3-0.5mdk
-- mandrakesoft is now mandriva
-
-* Thu Apr 21 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.3-0.4mdk
-- drakconnect: basic tokenring support
-
-* Thu Apr 21 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.3-0.3mdk
-- drakbackup, drakfont, draksplash: switch to gtk+-2.6's new file selector
-- drakbackup, drakroam: fix layout
-- drakfont: filter file list so that only fonts are displayed
-
-* Wed Apr 20 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.3-0.2mdk
-- drakconnect (blino):
-  o merge wireless steps and move advanced settings in advanced mode (#15501)
-  o configure wpa driver in drakconnect, wpa_supplicant init script is dropped
-  o fix default wireless mode to be "Managed" instead of "Secondary"
-  o really use given encryption key
-  o improve ndiswrapper driver configuration (allow to select driver,
-    device and many errors handling)
-  o fix fallback sysfs if ethtool failled
-  o do not write zeroed MAC addresses in iftab, it confuses ifrename
-  o do not crash if modprobe fails
-  o unload ndiswrapper first so that the newly installed .inf files
-    will be read
-  o allow to choose the wireless encryption mode between "None", "Open
-    WEP", "Restricted WEP" and "WPA Pre-Shared Key"
-- drakfirewall: fix automatic net interface detection (blino)
-- drakroam: fix SSID listing (blino)
-- keyboardrake: update keyboard list for next xorg-x11 (pablo)
-- mousedrake (blino):
-  o preselect synaptics touchpad if no external mouse is present
-  o better detection for touchpad
-  o append evdev in modprobe.preload if a touchpad is detected
-  o always configure an universal mouse so that USB mices can be hotplugged
-  o always set synaptics touchpad as secondary and don't list them in
-    mousedrake
-- net_applet: increase network check timeout to lower the load (blino)
-- XFdrake: suggest 1280x1024 instead of 1280x960 which causes pbs (pixel)
-
-* Fri Apr 15 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.3-0.1mdk
-- drakbackup: fix direct-to-tape backup/restore issues (stew, #15293)
-- drakconnect (blino):
-  o use sysfs as fallback to detect wireless interfaces (eg:
-    rt2x00/prism2_*)
-  o allow to modify METRIC settings in the wizard
-  o fix displaying wifi data in manage interface
-
-* Tue Apr 12 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-24mdk
-- drakconnect: fix connection establishment (rafael)
-
-* Mon Apr 11 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-23mdk
-- drakconnect (blino):
-  o fix error reporting for ndiswrapper package installation (#15373)
-  o handle spaces in ndiswrapper drivers path
-- XFdrake (pixel):
-  o fix empty ModeLine lines
-  o 1152x864 needs more modelines than the poor 1152x864@75Hz builtin
-    xorg (#11698)
-
-* Fri Apr  8 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-22mdk
-- drakconnect: always restart slmodem, even if it was already
-  installed (blino)
-- harddrake: fix harddrake crash with USB/PCI DSL modems (blino, #15034)
-
-* Thu Apr  7 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-21mdk
-- drakconnect (blino):
-  o fix support for fix h[cs]f modems
-  o create correct /dev/modem && install correct package for HCF modems
-- drakroam (blino):
-  o don't truncate default gateway (#15247)
-  o hide roaming frame by default
-- net_applet (blino):
-  o really allow users to start connection without having to type the
-    root password
-  o fix refresh
-
-* Tue Apr  5 2005 Olivier Blin <oblin@mandrakesoft.com> 10.2-20mdk
-- mousedrake: really apply specific ALPS touchpad settings (#14510)
-- drakconnect:
-  o install dkms packages if found
-  o support more slmodems
-- net_monitor: improve wifi detection
-- drakroam:
-  o do not crash if no essid is selected (partially fix #15244)
-  o hide unavailable features, add close button
-- drakboot (Pixel): apply patch from bugzilla #15216, adding support for
-  "password=..." and "restricted" at per-entry level (thanks to jarfil)
-- misc charset fixes (Pixel, Pablo)
-
-* Mon Apr  4 2005 Olivier Blin <oblin@mandrakesoft.com> 10.2-19mdk
-- drakconnect:
-  o only switch up wireless devices during detection
-  o do not reupload firmware for eagle-usb modems if already done
-  o disconnect internet interface before trying to connect
-- mousedrake: configure wacom devices with synaptics touchpads too
-- printerdrake (Till):
-  o Fixed bug #4319: Printer options cannot be set after renaming the
-    printer or changing the connection type
-  o Fixed bug of PostScript printers with manufacturer-supplied PPD
-    cannot be renamed at all
-  o Fixed bug of print queue being deleted when renaming fails
-  o Fixed bug of printerdrake trying to open a message window when
-    non-interactive queue generation fails
-  o Fixed pre-definition of $printer->{ARGS}, this bug made printerdrake
-    crashing sometimes
-- diskdrake (Pixel): add /usr/local and /opt to suggestions_mntpoints
-
-* Fri Apr  1 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-18mdk
-- drakconnect: enable ethernet interfaces during detection, thus
-  fixing Ralink wireless detection (blino)
-- harddrake: fix crash
-- mousedrake: configure wacom devices with synaptics touchpads too
-  (blino)
-
-* Thu Mar 31 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-17mdk
-- drakconnect: do not use ifplugd for wireless cards (and don't allow
-  to enable it) (blino)
-- drakfirewall: make it usable (pixel, #15116)
-- drakups: do not detect USB joystics as UPSes (#15131)
-- harddrake:
-  o do not try to install packages that are not availlable (#15106)
-  o do no try to install too generic hw packages (#15101)
-  o do not detect USB joystics as UPSes (#15102)
-- localedrake: do not try to logout wm (pixel, #15087)
-
-* Wed Mar 30 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-16mdk
-- drakconnect (blino):
-  o fix speedtouch microcode url (#15095)
-  o fix sagem modem config
-  o try to use the country specific CMV for sagem modems
-- harddrake:
-  o list hardware RAID controllers in their own section (so that they do not
-    appear in the unknown one)
-  o ensure we detect all known SATA controllers and all known sound cards
-  o fix optical mice detection (#15082)
-- net_applet: really load network configuration at start (blino)
-- printerdrake: do not mis-detect some USB keyboards as printers (till)
-
-* Tue Mar 29 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-15mdk
-- drakconnect (blino):
-  o fix eaglectrl path (#15033)
-  o detect more Bewan devices
-  o fix support for sagem modems not using pppoa
-- harddrake: add an option in harddrake to probe imm/ppa (pixel,
-  #12560)
-- localedrake:
-  o fix russian size (pixel, #14988)
-  o "unicode" checkbox is visible only in expert mode
-- fix tools' crash when drakconf is not installing (#13392)
-
-* Fri Mar 25 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-14mdk
-- drakroam:
-  o do not crash (blino)
-  o fix translations
-- net_applet (blino):
-  o ask for root password if needed when setting a new profile
-  o force refresh if asked by user from the menu
-
-* Thu Mar 24 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-13mdk
-- banners: make banner be RTL aware (aka follow language direction and
-  display itself mirrored for RTL languages) (#11910)
-- diskdrake (pixel):
-  o ensure we use/propose a free md when creating a new one
-  o after "mdadm --assemble" there can be some inactivate mds busying
-    devices, stopping them
-- drakconnect (blino):
-  o make Bewan PCI modems work again
-  o add support for modems using pppoatm (e.g. SpeedTouch) and ISP
-    using RFC 1483 Routed VC MUX (e.g. Free Degroupe)
-
-* Wed Mar 23 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-12mdk
-- XFdrake: fix probing on neomagic (pixel)
-- harddrake: package rpmsrate so that installing hw packages works
-
-* Tue Mar 22 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-11mdk
-- drakconnect: do not list wifi* interfaces (blino, #14523)
-- harddrake2: install packages needed for hw support
-- keyboarddrake: run dmidecode only once we acquired root capabilities
-  (pixel, #13619)
-
-* Mon Mar 21 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-10mdk
-- drakboot: enhance yaboot macos entry handling (cjw, #14642)
-- drakconnect: disable network hotplug for the via-velocity driver
-  (#14763)
-- drakups:
-  o fix driver for APC UPSes for auto USB probing
-  o set extra parameters if present
-- net_applet (blino):
-  o force start from menu (#14858)
-  o don't modify autostart config file value if started with --force
-- XFdrake (blino):
-  o use new recommended settings for synaptics-0.14.0
-  o use specific Synaptics settings for ALPS devices (#14512)
-
-* Fri Mar 18 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-9mdk
-- drakTermServ: detect all NIC that're know to drakconnect
-- drakups: fix device path when manually adding an UPS (#12290)
-- logdrake: fix explanation mode only displaying last line (#14368)
-
-* Fri Mar 18 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-8mdk
-- diskdrake (pixel):
-  o fix remove on LVM in newt interface (#14254)
-  o remove the lvm if destroying it succeeds (#14249)
-- drakboot: handle grub file names that do not correspond to a mounted
-  filesystem (pixel, #14410)
-- drakconnect: remove other mac address occurrences in iftab (blino)
-- drakTermServ (stew):
-  o lose the "system" calls
-  o use pxe.include now
-- drakperm:
-  o do not ignore groups with empty password field (#14777)
-  o better looking GUI: span groups & users on several columns (up to 3)
-- localedrake: always warn the user to logout, even if we can't help
-  (pixel, #14403)
-
-* Thu Mar 17 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-7mdk
-- drakconnect:
-  o fix localized sorting (#14634)
-  o manage interface (blino):
-    * allow to modify non configured devices
-    * really detect wireless devices
-- harddrake: fix adsl devices detection (blino, #14747)
-- logdrake: fix save dialog (blino)
-- printerdrake: fix queue name auto-generation, it sometimes hanged in
-  an endless loop (till, #14426, #14525, #14563)
-- XFdrake (pixel): 
-  o instead of having xorg.conf symlinked to XF86Config, do the
-    contrary
-  o use monitor-probe-using-X
-  o remove the "ratio" combo and have the resolutions from current
-    ratio by default and allow "Other" to see all others
-
-* Wed Mar 16 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-6mdk
-- drakboot: fix dropping line macos in yaboot.conf (pixel, #14642)
-- drakconnect (blino):
-  o allow to display multiple instances of the similar adsl devices
-  o fix unicorn packages installation
-- interactive layer: fix some nasty bug
-- localekdrake:
-  o preserve utf-8 setting (#12308)
-  o properly set UTF-8 for HAL mount options if needed (#13833)
-  o enable to enable/disable utf-8
-  o install scim-input-pad when switching IM for japanese
-  o ensure there's never a "previous" button on first step (even when
-    stepping back)
-- printerdrake: fix setting of default printer on daemon-less CUPS
-  client (till, #13940)
-- XFdrake: probe DDC, then fallbacks on DMI
-
-* Tue Mar 15 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-5mdk
-- diskdrake: add support for XBox (stew, pixel)
-- drakboot: don't die when we have no entries in grub menu.lst (pixel)
-- drakconnect (blino):
-  o allow not to set gateway device (#14633)
-  o fix and force CMVs symlink creation for eagle-usb
-- drakfirewall: allow connections from local net to firewall (blino,
-  #14586)
-- XFdrake (pixel):
-  o for 1400x1050, put the resolutions (60 and 75Hz are already in
-    extramodes, but they are GTF modelines, we can overrule them) 
-  o don't add modelines for 1280x1024, they are already in standard
-    vesamodes (builtin Xorg)
-  o when adding gtf modelines, sort them with high frequencies first
-    (since Xorg prefer the first matching modeline (!))
-
-* Thu Mar 10 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-4mdk
-- harddrake2: enable to upload the hardware list
-- XFdrake:
-  o fix crash when called from hwdb-clients
-  o skip the 4/3 detailed_timings otherwise they conflict with the
-    Xorg builtin vesamodes (pixel)
-- drakconnect (blino):
-  o use a higher timeout for modem dialing (#10814)
-  o make wpa_supplicant.conf readable by root only
-
-* Wed Mar  9 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-3mdk
-- drakconnect:
-  o workaround buggy sk98lin kernel driver (#14163)
-  o write selected dhcp client in ifcfg files (blino)
-- draksec: fix setting null values (#14364)
-
-* Tue Mar  8 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-2mdk
-- drakconnect (oblin):
-  o scan hidden ssid
-  o manage interface:
-    * handle more DHCP options
-    * move DHCP settings in a notebook page
-- XFdrake: choose a 4/3 resolution by default (pixel)
-- XBox support (stew)
-
-* Mon Mar  7 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-1mdk
-- diskdrake: allow live resizing of reiserfs on lvm (pixel)
-- drakboot: fix detecting yaboot (pixel)
-- drakconnet (blino):
-  o configure CMV for sagem modems
-  o delete gateway:
-    * if reconfiguring the gateway interface to dhcp
-    * if gateway device is invalid (#11761)
-    * if needed when configuring DSL devices (#13978)
-  o manage interface:
-    * detect all ethernet interfaces
-    * allow to modify DHCP settings
-- localedrake: let's be able to setup gcin (funda wang)
-- printerdrake: detect if the user has manually edited
-  /etc/cups/client.conf (till)
-- XFdrake: still improving monitors support (pixel)
-
-* Wed Mar  2 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.35mdk
-- drakboot (pixel):
-  o fix corrupted "Precise RAM size" field (#13874)
-  o handle boot-as and master-boot (#13846)
-- drakconnect: workaround buggy kernel (#12609)
-- net_applet: refresh every second, and do not reread network conf on
-  each refresh (blino, #11467)
-- printerdrake (till):
-  o add possibility to add a remote LPD printer in beginner's mode (#13734)
-  o fix incorrect display of accentuated characters in PPD options
-    also for boolean options (#13928)
-  o let detected LPD printer model be shown in a pop-up window and not
-    in the add printer wizard
-  o let detected socket printer model be shown if the IP/port was
-    manually entered
-  o fix selection of test pages
-  o ensure that recommended driver is preselected in expert mode, even
-    if the recommended driver is a manufacturer-supplied PPD with
-    language tag
-- ugtk2 layer: misc fixes
-- XFdrake (pixel):
-  o add a ratio choice, and restrict the resolutions to this choice
-  o add 1280x600 for VAIO PCG-C1M (#5192)
-  o fix section with only comments
-  o "keyboard" InputDevice can also be called "kbd"
-  o do not only add modelines not defined in xorg, otherwise xorg will
-    prefer the modelines we provide (eg: it will use 1024x768@50
-    whereas it could have used 1024x768@60)
-- configure iocharset and codepage option for hal (pixel, #13833)
-
-* Tue Mar  1 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.34mdk
-- diskdrake: allow to choose encryption algorithm (blino, #13472)
-- drakhelp, drakbug: use www-browser (daouda)
-- printerdrake: fix "add printer" wizard chen embedded in the MCC (#13929)
-- XFdrake: further monitor fixes (pixel)
-
-* Tue Mar  1 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.33mdk
-- drakconnect: enhance "wrong network mask format" message (blino, #10712)
-- drakTermServ: sort list of nbis (stew, #13998)
-- keyboardrake: set compose key as "rwin" if not set (pablo)
-- XFdrake (pixel):
-  o replaced by use monitor-edid instead of ddcxinfos
-  o add many resolutions
-  o set the "Monitor preferred modeline" from EDID in xorg.conf
-  o handle lower than 640 resolutions
-  o set better resolution
-
-* Mon Feb 28 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.32mdk
-- drakboot: make sure /boot/grub/install.sh is 755 (pixel)
-- drakconnect (blino):
-  o allow to alter DHCP timeout (# 11435)
-  o add support for PEERDNS, PEERYP and PEERNTPD (#9982)
-  o workaround broken ethtool from hostap drivers (#13979)
-  o handle USERCTL settings for modems too
-- net_applet (blino):
-  o add menu entry (#11898)
-  o netprofile support (#12094)
-  o allow to select watched interface
-- printerdrake: let country and not language decide about default
-  paper size (till)
-
-* Fri Feb 25 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.31mdk
-- drakconnect (blino):
-  o allow users to start the connection (#12837)
-  o pre-detect modem device
-- keyboarddrake: new default keyboard is "us" for Chinese (pablo)
-- printerdrake: driver "oki4w" was renamed to "oki4drv" (till)
-
-* Fri Feb 25 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.30mdk
-- drakconnect :allow to select "unlisted" provider in adsl provider
-  list (blino)
-- drakfont: fix uninstalling fonts (#9324)
-- drakproxy: do not update kde config file if kde isn't installed (blino)
-
-* Thu Feb 24 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.29mdk
-- drakconnect:
-  o add norwegian ADSL providers (Eskild Hustvedt)
-  o remove all non-digit characters in phone number (blino, #10813)
-  o minimal WPA support (blino)
-- drakxtv: scan TV channels for TV cards that do not require any
-  driver configuration (#13865)
-- drakups:
-  o fix crash due to latest perl-Libconf 
-  o fix reading UPS db
-- net_applet: fix name of mcc tool (blino & me, #13896)
-- printerdrake:
-  o enable to alter options of a not set up non-Foomatic queu
-  o fix accentuated characters in PPDs not correctly reproduced in the
-   printer options dialog
-- GUI layers:
-  o fix displaying "Advanced" instead of "Basic" in advanced_state by
-    default (pixel, #13944)
-  o force to open file selector as a modal window (rafael, #13942)
-
-* Tue Feb 22 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.28mdk
-- drakfont: allow to select multiple files (blino)
-- localedrake:
-  o adapt to new uim splitting (UTUMI Hirosi)
-  o adapt to new scim packages splitting (Funda Wang)
-  o fix koi8-u font size (Funda Wang, #13809)
-- keyboardrake: handle lb locale (pablo)
-- printerdrake: if a printer is set up with HPLIP and has still an old
-  HPOJ configuration, it will be automatically removed (till)
-- scannerdrake (till):
-  o display unsupported scanners as such in the scanners list (#12049)
-  o load kernel modules (and make them loaded on boot) if specified in
-    ScannerDB
-  o tell user if his scanner requires manual editing of config files
-    to work (the appropriate scanner models are marked in ScannerDB)
-
-* Wed Feb 16 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.27mdk
-- drakboot: make it more robust (pixel)
-- drakproxy: set up KDE too (blino)
-- harddrake: list usb mice that are not listed in usbtable (#13575)
-- interactive layer: use the new gtk+ file chooser (pixel)
-- keyboarddrake: make keyboard layout more user friendly
-- printerdrake (till):
-  o force only ASCII letters, numbers, and underscores being used in
-    print queue names
-  o wait for CUPS being ready before querying the printer states for
-    the printer list in the main window
-- reduce drakxtools-backend's requires (pixel)
-
-* Mon Feb 14 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.26mdk
-- draksound, service_harddrake: handle more sound cards
-- localedrake: alter font settings for zh_CN and zh_TW (funda wang)
-- printerdrake (till):
-  o allow HPLIP setup also when setting up the print queue manually
-  o fix undetection of network printers without DNS hostname entry
-  o longer timeouts for "ping", as some network printers were missed
-- service_harddrake: handle removal of cards (#7049)
-
-* Fri Feb 11 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.25mdk
-- harddrake service: fix removing PCMCIA controller
-- hardware support: detect & load modules for RNG (crypto hw)
-
-* Thu Feb 10 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.24mdk
-- drakxtv:
-  o only offer to configure tv cards that (may) need to be configured
-  o do not complain about no tv cards when there're but they do not
-    require any configuration beyond loading proper module (#7443,
-    #11270, ...)
-- harddrake:
-  o detect more webcams
-  o do not detect speakers as keyboards
-- printerdrake: misc fixes (till)
-
-* Thu Feb 10 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.23mdk
-- printerdrake (till):
-  o add automatic setup of HP printers with HPLIP
-  o fixes for embedded mode
-- drakconnect:
-  o add support for ACP (Mwave) modems
-  o fix stepping back from lan interface step with ndiswrapper
-  o fix ndiswrapper installing
-- interactive layer: fix selecting a file (eg: ndiswrapper's drivers)
-- hardware support:
-  o detect & load modules for:
-    * toshiba driver for some laptops
-    * some multiport serial cards
-    * DVB
-    * joysticks
-  o add support for multiple different AGP controllers
-  o handle a few more special serial port cards
-
-* Wed Feb  9 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.22mdk
-- localedrake: switch arabic font for KDE from "Roya" to "Terafik"
-  that supports ascii glyphs (pablo)
-- ugtk2: API changes for rpmdrake (rafael)
-
-* Wed Feb  9 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.21mdk
-- drakboot: fix ACPI checkbox (pixel, #13335)
-- drakkeyboard: synchronized keyboards with X11 (pablo)
-- harddrake service: prevent adding spurious empty lines at end of
-  /etc/hotplub/blacklist on stop
-- printerdrake: updates
-
-* Tue Feb  8 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.20mdk
-- drakconnect (blino):
-  o add basic ndiswrapper support
-  o select manual adsl connection type if the network interface was
-    static
-  o add missing protocol for Free and Telecom Italia in ISB DB
-- drakproxy: support gnome proxy (blino)
-- printerdrake (till):
-  o adapt to new printer drivers packages
-  o limit automatically generated print queue names to 12 characters
-    and warn user if he manually enters longer names (which will make
-    the printer unaccessible for some Windows clients) (#12674).
-- allow upper case letters in users' real names (rafael)
-- net_applet: automatically start in fluxbox and XFce4 too (blino)
-
-* Fri Feb  4 2005 Olivier Blin <blino@mandrake.org> 10.2-0.19mdk
-- drakconnect: add bpalogin support for cable connections
-
-* Thu Feb  3 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.18mdk
-- drakconnect: fix CAPI kernel drivers installation (blino)
-- drakfirewall: port 445 is used for Samba (w/o NetBios) (blino)
-
-* Fri Jan 28 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.17mdk
-- diskdrake: fix autocheck flag in /etc/fstab for / (pixel, #13283)
-- drakbackup: Wizard, System Backup configuration problems (stew, #13235)
-- harddrake service:
-  o fix PCMCIA autoconfig
-  o make --force force harddrake to reconfigure everything
-
-* Wed Jan 26 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.16mdk
-- diskdrake: use the new option auto=dev instead of auto=yes when
-  configuring mdadm (pixel)
-- drakTermServ (stew):
-  o drop quasi-pxe setup in dhcp.conf as we can use real pxe now
-  o portmap check, dhcpd.conf.pxe.include (#13138 & #13139)
-- package installation: use the new --gui option to urpmi for the
-  drakxtools to ask for media change (rafael)
-- mygtk2 related fixes (pixel)
-
-* Fri Jan 21 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.15mdk
-- fix mygtk2 for drakloop (pixel)
-- printerdrake: fix main loop (daouda)
-
-* Fri Jan 21 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.14mdk
-- drakconnect: update ISP db (baud)
-- harddrake: fix pcmcia controllers detection
-
-* Fri Jan 21 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.13mdk
-- keyboarddrake: minimal XkbModel support (pixel)
-- diskdrake (pixel):
-  o don't write /etc/mdadm.conf when no raid
-  o use option "auto=yes" in mdadm.conf to ensure mdadm will create
-    /dev/mdX devices when needed
-- printerdrake:
-  o fix subdialogs when embedded in mcc
-  o fix banner's title by initializing l10n domains before ugtk2
-
-* Wed Jan 19 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.12mdk
-- diskdrake: progress bar when formatting ext3 (pixel)
-- drakauth: fix switching back nsswitch.conf to local authentication
-  (pixel, #13024)
-- drakbackup: custom cron configuration (stew, #13056)
-- drakboot: do not create a maping table when uneeded (#12307)
-- drakconnect: fix bug introduced by mygtk2 (pixel)
-- drakfirewall: fix ethernet card detection (pixel, #12996)
-- harddrake2: fix crash on opening help windows
-- interactive layer: separate alignement for basic and advanced
-  entries (pixel)
-- XFdrake (pixel):
-  o when reading an existing X config file, ensure it is not too bad,
-    otherwise propose to start from scratch (#8548)
-  o set up framebuffer in standalone mode too
-  o for fbdev, advise to reboot instead of restarting X server
-
-* Wed Jan 12 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.11mdk
-- harddrake2: display the menubar and the banner when embedded
-
-* Wed Jan 12 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.10mdk
-- drakbackup, drakTermServ: silent install of terminal-server (urpmi
-  --X is deprecated) (rafael)
-- localedrake (Funda Wang):
-  o install scim-chewing for zh locale
-  o fix font setting for zh_CN
-- printerdrake: show banner when embedded
-- write in lilo.conf the global root= (pixel, #12312)
-
-* Thu Jan  6 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.9mdk
-- diskdrake: display a progress bar while formating (pixel)
-- localedrake: fix UIM config b/c of new UIM-0.4.5
-
-* Wed Jan  5 2005 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.8mdk
-- drakauth: "Administrator (root)" is more user-friendly than "root"
-- drakbackup (stew):
-  o directories with spaces Mandrakeclub
-  o perms on tarballs too (#12861)
-- drakconnect: update ADSL ISPs list (baud)
-- drakfirewall: "Samba server" is better named "Windows Files Sharing
-  (SMB)" (pixel, #10585)
-- draksound, harddrake service: handle a couple of new ALSA drivers
-- handle handle spaces in SMB username (pixel)
-- keyboardrake: handle various new keyboard layouts (pablo)
-- localedrake: do not localize console in japanese (Funda Wang)
-- remove codepage= option for fs types which don't handle it (eg:
-  ntfs) (pixel)
-
-* Thu Dec 23 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.7mdk
-- detect more floppies when dmidecode is supported (pixel)
-- drakconnect:
-  o do not crash when configuring a modem
-  o fix NETMASK autofilling
-- localedrake: do not localize console when using jp (Funda Wang)
-- XFdrake: make "XFdrake --auto" fully automatic (pixel)
-
-* Wed Dec 15 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.6mdk
-- handle more PCMCIA/CardBus cards
-- do not try to load floppy module if there's no floppy drive (#8211)
-- drakTermServ: misc GUI enhancements (pixel, stew)
-- harddrake service: configure PCMCIA host controller if needed
-- new package drakx-finish-install (pixel)
-- new mygtk2 layer
-
-* Fri Nov 26 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.5mdk
-- diskdrake: handle common geometry XXX/240/63 is quite common thus
-  fixing yet another infamous "XP doesn't boot" (though it should
-  already be fixed via EDD) (pixel)
-- XFdrake: don't write X config when there is none (otherwise we write
-  a partial and broken X config)
-
-* Thu Nov 25 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.4mdk
-- diskdrake: more intelligent sort of fstab to handle loopback files
-  or bind directory (pixel, bug anthil #1198)
-- drakboot: detect on lilo on floppy (pixel, #12213)
-- drakconnect: in "ADSL provider" step, reset the protocol on provider
-  switch
-- draksound: handle new sound drivers from kernel-tmb and kernel-multimedia
-- drakupdate_fstab: fix /dev//dev/foobar in /etc/fstab (pixel, #12224)
-- harddrake service:
-  o fix setting scsi and usb probell in live CD (thus fixing
-    mousedrake --auto with USB mice on live CD)
-  o do not die if sound never was configured (aka on first boot from a
-    live CD)
-
-* Wed Nov 17 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.3mdk
-- bootloader: let be kernel-i686-up-64GB aware (pixel)
-- diskdrake: LVM/DM/MD fixes (pixel)
-- drakupdate_fstab: use the right encoding when creating an entry for
-  /etc/fstab (pixel, #12387)
-- PPC fixes (Christiaan Welvaart, pixel)
-- service_harddrake: on startup, redo ethX aliases
-
-* Fri Nov 12 2004 Rafael Garcia-Suarez <rgarciasuarez@mandrakesoft.com> 10.2-0.2mdk
-- Rebuild for new perl
-- drakauth (pixel):
-  o correctly restore pam.d/system-auth when setting "local" authentication 
-  o no use_first_pass on "auth sufficient pam_unix.so" line for pam_castella
-- localedrake: switch zh_CN to GBK (Funda Wang)
-- logdrake: speed it up
-
-* Wed Nov 10 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.2-0.1mdk
-- drakauth: add SmartCard authentication (pixel)
-- drakbackup: advise user about anacron (stew, anthill #1134)
-- drakconnect:
-  o add support for Philips Semiconductors DSL card (blino)
-  o security fix: let ifcfg files be readable only by root when a WEP
-    key is set (blino, #12177)
-  o update/add ADSL ISP entries (baud)
-- drakTermServ (stew):
-  o create cfg dir if needed
-  o use xorg.conf
-  o touch /etc/dhcpd.conf.etherboot.kernel if missing
-  o ignore vmnet for broadcast address
-  o start reworking PXE support.
-- harddrake2: display more information about memory
-- localedrake: fix configuring fcitx IM (Funda Wang)
-- XFdrake: do not detect smartcards (pixel)
-
-* Thu Oct 28 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-27mdk
-- bootloader: run grub chrooted (gwenole)
-- diskdrake:
-  o show older partition types (eg: ntfs) on x86_64 (gwenole)
-  o newly created raids must have a fs_type (pixel)
-- drakconnect:
-  o add support for freebox v4 ADSL modem with USB link
-  o show correct strings for freebox and n9box ADSL modems
-- drakups: fix again MGE USB UPSes
-
-* Tue Oct 12 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-26mdk
-- bootloader-config: in grub menu.lst, keep previous "serial ..." and
-  "terminal ..." lines (pixel, #12054)
-- drakconnect:
-  o fix crash in delete wizard
-  o workaround more buggy drivers that returns a bogus driver name for
-    the GDRVINFO command of the ETHTOOL ioctl
-
-* Mon Oct 11 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-25mdk
-- drakconnect: workaround buggy prism2_usb that returns a bogus driver
-  name for the GDRVINFO command of the ETHTOOL ioctl
-
-* Mon Oct 11 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-24mdk
-- drakconnect (blino):
-  o delete wizard: remove /etc/sysconfig/network-scripts/ethX files
-  o ADSL configuration:
-    * remove /etc/sysconfig/network-scripts/ethX files that may have
-      been created by sagem scripts
-    * don't write ifcfg-ppp0 for static/dhcp connections
-
-* Fri Oct  8 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-23mdk
-- drakconnect:
-  o fix encapsulation for chinese ISPs (Funda Wang, #10965)
-  o fix H[CS]F modems configuration (adapt to new kernel packages
-    names)
-  o start slmodemd when installing it (thus preventing the average
-    user to have to restart his machine in order to get a working
-    connection)
-  o try /dev/ttyS14 too for serial modems (ie internal PCI modems that
-    don't need any driver but export a serial port instead)
-
-* Fri Oct  8 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-22mdk
-- bootloader-config: on a recent kernel, remove any existing devfs=
-  kernel option in order to enable udev (pixel)
-- drakconnect: add chinese ISPs (Funda Wang, #10965)
-- XFdrake: fix parsing fully commented Section (pixel)
-
-* Wed Oct  6 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-21mdk
-- bootloader-config: fix installing kernel-2.6.8.1-12.1mdk (pixel)
-- drakups: fix brown paper bug in USB detection
-
-* Tue Oct  5 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-20mdk
-- drakups:
-  o fix port for MGE's USB UPSes
-  o fix drivers for MGE UPSes
-  o fix installing nut
-  o add support for "American Power Conversion" UPSes
-  o restart upsd daemon once nut config is written
-  o write config in pure wizard mode
-  o when manual adding an UPS:
-   * fix reading driver DB
-   * fix reading driver from the list
-- diskdrake: do not fail with c0d0p* devices (pixel)
-- drakconnect: applying changes can be quite time expensive,
-  especially with ppp and wifi connections thus let's show a "wait"
-  message
-- drakfont: fix closing import dialog (#11052)
-
-* Tue Oct  5 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-19mdk
-- drakconnect: 
-  o ADSL DB (baud):
-    * add a few new ADSL ISPs
-    * fix wrong VCI which wasn't in hexa for brazililan Velox/Telemar ISP
-  o manage interface (blino:
-    * recompute NETWORK and BROADCAST fiels
-    * use both type and device name in non-ethernet interfaces list
-    * do not crash if BOOTPROTO is empty, use 'none' by default (#11899)
-
-* Mon Oct  4 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-18mdk
-- drakconnect: do not lose GATEWAYDEV if it is a non wireless one and
-  a static wireless card is configured (and vice versa) (blino)
-
-* Mon Oct  4 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-17mdk
-- 64-bit fixes (gwenole)
-- drakconnect: write wlan-ng config files for prism2 drivers (blino)
-- harddrake service: 
-  o do not disable glx when switching from nvidia driver to nv
-    (indirect support, #11285)
-  o do not fail when hw db is corrupted
-
-* Mon Oct  4 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-16mdk
-- drakconnect (blino):
-  o only write TYPE field in ifcfg files for xDSL connection
-  o do not lose ONBOOT setting for manual/DHCP DSL connections
-  o fix the "IP %s address is usually reserved" warning
-  o sagem modems:
-    * fix again DHCP/static connections with sagem
-    * write static IP in eagle-usb.conf if needed
-    * load specific modules/programs before config is written
-    * do not reset IP address when configuring
-    * automatically guess gateway for static connections
-
-* Fri Oct  1 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-15mdk
-- fix serial UPS detection
-
-* Fri Oct  1 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-14mdk
-- mousedrake, harddrake service: do not crash with touchpads (blino)
-- harddrake service: on stop, blacklist snd-usb-audio (#8004)
-
-* Fri Oct  1 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-13mdk
-- diskdrake: don't die when device-mapper is missing (eg on 2.4
-  kernel) (pixel, #11834)
-- drakconnect : call the scripts in
-  /etc/sysconfig/network-scripts/hostname.d like the network scripts
-  are doing when changing the hostname (fredl)
-- drakups:
-  o add --wizard option in order to directly run the wizard
-  o do not show banner when embedded
-- harddrake:
-  o list tablets with mice
-  o fix UPS devices listed in both "UPS" and "unknown" classes
-  o provide more data on UPS
-- localedrake:
-  o set KDE in m17n emvironment if needed
-  o split its menu entry in two (one for user config, one for system
-    embedded in mcc)
-
-* Thu Sep 30 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-12mdk
-- disable the new gtk smart search which display an entry box (pixel)
-- preload nvram on laptops
-- print translated usage message (#5657)
-- bootloader-config, drakboot: add raid-extra-boot=mbr when installing
-  on mdX (pixel, #11699)
-- diskdrake (pixel):
-  o fix LVM2 support
-  o fix "Illegal division by zero" when installing lilo (#11738)
-  o skip unopenable devices when looking for device geometry
-- drakperm: list users rather than groups when requested for (anthill #1161)
-- drakroam: specify device to iwconfig when applying settings (blino,
-  #11279)
-- localedrake:
-  o fix KDE font names to match currently shiped Xfs font names (pablo)
-  o fix setting fonts at install time
-- drakconnect (blino):
-  o all linmodems (including Hsf and Hcf ones) are now supported with
-    2.6 kernels
-  o ask to connect for modem/isdn connections again
-  o better default connection detection
-  o check if IP address is already used for static interfaces
-  o handle madwifi (fredl)
-  o try to detect default connection in adsl > isdn > modem > ethernet
-    order
-- drakups: really fix refreshing UPS list when adding a new UPS though
-  the add wizard
-- harddrake: list all mice and keyboards (thus lowering unknown
-  hardware in hwdb-clients)
-- mousedrake, XFdrake: use input/mice instead of psaux for synaptics
-  touchpads with 2.6 kernels (blino, #11771)
-- net_applet (blino):
-  o do not destroy/re-create menu if state hasn't changed, or else the
-    menu may disappear without any reason
-  o fix again running processes detection
-- net_monitor (blino):
-  o fix start/stop
-  o check every 5 seconds (instead of 20) for new or disconnected
-    interfaces (#11780)
-- printerdrake: misc fixes (pixel)
-- XFdrake: use driver "keyboard" instead of "Keyboard" (fix Xorg-6.8
-  support) (pixel)
-
-* Fri Sep 24 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-11mdk
-- handle aes-i586 instead of aes (pixel, #11588)
-- bootloader-config: fix typos in usage (pixel)
-- diskdrake (pixel):
-  o get geometry from EDD
-  o don't add /dev/pts line in fstab anymore (already done in initrd
-    and by udev)
-  o log more explanations
-  o remove every PVs when destroying a VG (#11579)
-  o handle renamed devices (eg: hde->hda or hda->sda)
-  o silently ignore encrypted filesystems with no encrypt_key
-- drakconnect (blino):
-  o zeroconf:
-    * really enable zeroconf if zeroconf is requested
-    * write blank zeroconf hostname if zeroconf is disabled
-    * fix disabling zeroconf
-    * do not disable not installed (prevent warnings in console)
-    * zcip isn't a service,
-    * stop tmdns service if zeroconf is disabled,
-  o move "Start at boot" step for lan-like adsl/cable connections
-  o do not disable ifplugd support for wireless cards
-  o do not let speedtouch-start launch connection
-  o fix installing kernel packages for winmodems
-  o fix /dev/modem symlink on ttySL0 (#8947 again)
-  o use avmadsl option for capi cards to use settings generated by
-    drdsl
-  o PPPoA: fix reseting vpi and vci if vpi equals zero
-  o ADSL provider DB: rename "T�l�2 128k " as "T�l�2"
-- drakupdate_fstab: allow SYNC=no option in /etc/sysconfig/dynamic
-  (blino)
-- drakups:
-  o refresh UPS list when adding a new UPS though the add wizard
-  o fix automatically detect/add an UPS
-  o default to automatic detection
-- localedrake:
-  o add support for SKIM IM
-  o install x-unikey when switching to vietnamese
-  o always use "Sazanami Gothic" font in japanese
-- mousedrake: prevent a broken X configuration to break mouse
-  configuration (pixel)
-- net_monitor: remove connection time timer if connection fails (#11590)
-- XFdrake: allow ignoring X config file when it contains errors (pixel)
-
-* Fri Sep 17 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-10mdk
-- drakbackup: use radio buttons in media selection (wildman)
-- drakconnect (blino):
-  o better looking description list in drivers list (me)
-  o remove the "speedtch off" alias (fix mdk10.0 upgrade)
-  o don't write aliases for pcmcia cards, thus fixing the pcmcia
-    service startup
-  o stop capi service before new config is written so that capiinit
-    can unload the old driver
-  o make isdn over capi work again
-  o do not ask which driver to use when only capidrv is supported
-  o install unicorn-kernel package for Bewan modems if available
-  o add "Unlisted - edit manually" entry in modem provider list (#11549)
-- harddrake service (blino):
-  o probe firewire and pcmcia network devices too
-  o update iftab when new ethernet devices are detected
-
-* Wed Sep 15 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-9mdk
-- drakconnect:
-  o don't create empty pppoe.conf if the package isn't installed
-  o load modules and run start programs
-- bootloader-config: fix crash when when removing some break entries (pixel)
-- keyboarddrake, XFdrake: better turkish support (pablo)
-
-* Tue Sep 14 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-8mdk
-- localedrake: offer to select IM if language has one preselected
-  (eg: CJKV, else option is only availlable in advanced mode)
-- harddrake service: adapt to new nvidia driver location
-
-* Tue Sep 14 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-7mdk
-- add man pages for drakbackup and drakconnect
-- drakauth: misc fixes (stew)
-- drakconnect:
-  o misc cleanups (blino)
-  o setup slmodem (blino)
-  o workaround buggy eth1394 that returns a bogus driver name for the
-    GDRVINFO command of the ETHTOOL ioctl (so that we set a
-    sensible name for firewire network adapters in GUIes)
-
-* Tue Sep 14 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-6mdk
-- drakconnect: install firmware if needed for CAPI devices (blino)
-- harddrake:
-  o detect not yet supported ethernet cards too
-  o detect more bridges and the like
-- scannerdrake: try harder not to detect non scanner USB devices (#7057)
-
-* Tue Sep 14 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-5mdk
-- drakbackup:
-  o fix crashes in CD/Tape setup (stew)
-  o fix wizard's UI behavior (Nicolas Adenis-Lamarre)
-- drakconnect (blino):
-  o handle CAPI drivers
-  o add support for xDSL over CAPI (eg: AVM cards)
-  o fix pppoe configuration
-- draksec: move help from tooltips into separate page (#9894)
-- scannerdrake: fix "dynamic()" in scannerdrake to do not contain
-  anything interactive (till)
-
-* Mon Sep 13 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-4mdk
-- drakbug_report: fix crash
-- XFdrake: adapt to new proprietary package naming (pixel)
-
-* Fri Sep 10 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-3mdk
-- net_applet (blino):
-  o fix crash on connect/disconnect (#11389)
-  o refresh status on every 5 second
-
-* Fri Sep 10 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-2mdk
-- description
-  o split drakxtools description in drakxtools and drakxtools-newt
-  o describe missing tools
-  o sanitize tool names
-- drakconnect: do not ask twice if network should be started on boot
-  for ADSL modem (blino)
-- keyboarddrake, XFdrake (pablo):
-  o fix compose:rwin
-  o fix some keyboard layout on xorg in order to match to match x.org
-
-* Fri Sep 10 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-1mdk
-- fix console UIs (pixel)
-- drakboot: do not kill the whole bootsplash wizard when embedded (blino)
-- drakconnect: fix cnx status in "internet" interface (blino)
-- harddrake service: autoconfigure mice if needed
-- localedrake: fix ENC setting when IM is disabled
-
-* Thu Sep  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.27mdk
-- localedrake:
-  o really reset IM on language switch
-  o set ENC and locale specific stuff even when IM is disabled
-  o fix thai IM
-
-* Thu Sep  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.26mdk
-- bootloader-config: handle raid-extra-boot (pixel, #11350)
-- drakboot: handles more cases where lilo wants to assign a new Volume
-  ID (pixel)
-- localedrake:
-  o install miniChinput when configuring chinput
-  o fix miniChinput configuration for Singapore 
-  o handle languages with default IM w/o any configured IM (aka keep
-    "none" user choice) but default to per locale default IM when
-    switching between locales
-  o fix configuration of IM when altering depending on encoding (eg:
-    miniChinput)
-
-* Thu Sep  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.25mdk
-- bootloader-config (pixel):
-  o fix regexp to work with "linux-2.6.8.1-10mdk"
-  o handle lilo "static-bios-codes" option
-  o prevent LILO from reading from tty
-  o only expand symlinks when renaming "linux" into the kernel version
-    based label (eg: "2681-10")
-- drakboot:
-  o ensure ~/.dmrc is owned by user else GDM complains about
-  o handles the lilo case where it wants to assign a new Volume ID (pixel)
-- drakconnect: 
-  o ignore rpm's backups (#10816)
-  o always update iftab when config is written (blino)
-  o detect slamr, slusb and ltmodem modules for modems (fredl)
-- drakupdate_fstab: handle options in any order (fix harddrake service
-  regarding amove media as well as regarding cdroms, burners and dvds)
-- harddrake service: log which tools are runned
-
-* Wed Sep  8 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.24mdk
-- drakboot (blino, #11282):
-  o update splash when removed too
-  o use Mandrakelinux theme by default
-  o don't give theme name to remove-theme
-- drakconnect: fix empty "manage interface" (blino, #11287)
-- drakperm: fix freeze (#11274)
-- harddrake service: fix X11 autoconfiguration
-
-* Tue Sep  7 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.23mdk
-- bootloader-config: take care of symlink based bootloader entries (pixel)
-- diskdrake (pixel):
-  o ignore first line of /proc/swaps
-  o partially handle /udev/xxx device names in fstab
-  o ignore rootfs "device"
-  o don't warn for loopback files
-- drakbug: fix --report and --incident (daouda)
-- drakconnect (blino):
-  o "delete network interface" wizard:
-    * use long device names
-    * be aware of internet service -> regular ifcfg files
-  o misc fixes (especially regarding sagem ADSL modems)
-- harddrake service: really autoconf TV cards
-- more synaptics fixes (blino)
-- use "users" options for removable devices (so that users can unmount
-  them if the devices were mounted by root) (blino)
-
-* Mon Sep  6 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.22mdk
-- diskdrake (pixel):
-  o detect linux software raid magic
-  o detect LVM2
-  o misc fixes
-  o fix displaying "mdmd0" instead of "md0"
-- drakboot: ensure we do not enable autologin w/o any user
-- drakconnect (blino):
-  o fix detection in 2.4 kernel for net devices with high traffic
-  o only complain about kernel-2.4.x for h[cs]f modems
-  o fix kppp config reread
-  o read kppp config when user dir is configured
-  o use /dev/modem if no modem was detected (do not crash when we edit
-    a connection whose modem is unplugged)
-- harddrake service: everything should be done automagically now
-- localedrake:
-  o list specific packages to install for japanese when using SCIM
-  o install scim-m17n as well for generic SCIM configuration (more
-    input methods)
-  o log more explanations
-  o set QT_IM_MODULE too since it's needed by Qt-immodule-20040819
-    (UTUMI Hirosi)
-  o disable translations on console for kn, pa, ug too (pablo)
-
-* Mon Sep  6 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.21mdk
-- misc GUI enhancements
-- diskdrake: be more failsafe with half broken existing raids (pixel)
-- drakconnect: fix crashes (#11100)
-- harddrake service: really add module for storage controllers, AGP
-  controllers, TV cards
-- mousedrake, XFdrake: fix synaptics configuration (blino)
-
-* Fri Sep  3 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.20mdk
-- detect more devices
-- misc GUI cleanups
-- netconnect: support DHCP and static for sagem devices (blino)
-
-* Thu Sep  2 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.19mdk
-- add icons to most tools' windows
-- drakboot: do not crash if default autologin or default desktop
-  doesn't exist (blino)
-- drakupdate_fstab: do not use supermount by default for removable
-  devices (blino)
-- localedrake:
-  o enable SCIM for Amharic language
-  o fix missing banner title
-- net_applet: tell when internet connection is not configured (blino)
-- printerdrake: misc enhancements (till)
-- service_harddrake: add modules to conf files if a tv card is detected (blino)
-
-* Tue Aug 31 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.18mdk
-- drakclock (warly):
-  o check if the ntpdate command succeed or not
-  o do not perform a date command when we use ntpdate
-  o fix hour setting though mouse on the clock
-  o make the hour tick shorter
-  o repaint the calendar (especially when the day changed)
-- drakconnect:
-  o fix crashes (#11100)
-  o misc fixes (blino)
-- drakfirewall: use the loc zone in sharewall policy only if the loc
-  interface exists (florin, #10539)
-- harddrake2:
-  o add UPS class (fredl)
-  o be more enable friendly regarding themes (eg font size properly
-    adapt to theme changes)
-- net_applet: make it start again
-
-* Mon Aug 30 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.17mdk
-- drakclock: fix layout so that NTP frame is not badly cut on small
-  resolution (#10971)
-- net_applet:
-  o allow to connect/disconnect from net_applet
-  o launch net_monitor once
-  o launch net_monitor in background
-- printerdrake:
-  o add column to show whether the printers are enabled or disabled to
-    the list of available print queues in the main window
-  o add command to the edit-printer window to enable and disable print
-    queues
-  o fix managment of "--expert" command line option
-
-* Sun Aug 29 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.16mdk
-- drakconnect: add metric support according to connection type (blino)
-- drakroam (Austin):
-  o fix "Add" button behavior
-  o don't show channel 0 for auto mode
-  o move DHCP column to left for better sizing
-- drakupdate_fstab: do not mount and add/delete in fstab when many
-  partitions (blino, #11005)
-- logdrake: fix displaying only last parsed file
-- printerdrake (till):
-  o add support for daemon-less CUPS client
-  o fix graying out of buttons/menu entries in the main window
-  o fix unrecognized local queues when the spooler daemon is not
-    running during printerdrake startup
-- XFdrake: fix crash on resolution change
-
-* Fri Aug 27 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.15mdk
-- GUI cleanups:
-  o drakboot: fix canceling first step
-  o localedrake: let's look & behave like a wizard (fix cancel on
-    country choice)
-- drakconnect: detect Intel & ATI PCI modems
-- localedrake: really install proper packages depending on (locale,
-  input method) tuple (and not just those depending on IM)
-- XFdrake: add dell D800 specific modeline and resolution (Olivier
-  Thauvin)
-
-* Thu Aug 26 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.14mdk
-- fix ddcprobe for other archictectures
-- drakconnect: restart network for non ethernet adsl devices (blino)
-- harddrake service:
-  o add --force parameter (#9613)
-  o do run configurator
-  o restore bootsplash (blino)
-- printerdrake: prepare support for daemonless CUPS client (till)
-- XFdrake: fix synaptics configuration (blino)
-
-* Wed Aug 25 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.13mdk
-- fix modules conf parsing (blino)
-- ddcxinfos: extensive rewrite and cleanups to use the new int10
-  interface and a last-resort means to get VBE/EDID information from
-  special -BOOT kernel during early boot (gwenole)
-- drakconnect (blino):
-  o add Siol (the bigest ADSL provider in Slovenia) in ADSL providers
-    DB (Gregor Pirnaver)
-  o allow multiple aliases per host
-  o always add an hostname alias and add it on the loopback device
-    (#10345)
-  o do not ask the user to do an inifinite looping in MCC ...
-  o prevent recognize ppp0 as both modem and adsl (#10772)
-- drakroam: fix crash when config directory does not exist (#10935)
-- listsupportedprinters (till): introduce it for auto-generation of
-  Mandrakelinux hardware support DB
-- localedrake: 
-  o fix country selection (blino, #10938)
-  o install proper packages depending on (locale, input method) tuple
-- mousedrake, XFdrake (blino):
-  o synaptics touchpad support
-  o fix wacom support
-- printerdrake:
-  o fix crash
-  o handle print queues with the "lbp660" and "ml85p" drivers (which
-    directly communicate with the printer instead of sending the
-    output to a CUPS backend) (till)
-  o prevent queues using "lbp660" and "ml85p" from opening message
-    windows when the print queues are auto-generated by
-    dynamic/hotplug (till)
-  o if the user gets an error/warning message during setup of a
-    lbp660/ml85p queue, he is automatically put back to the previous
-    step in the add-printer wizard (till)
-  o do not embedd warning messages in the add-printer wizard, as they
-    have no "Previous" button (till)
-
-* Mon Aug 23 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.12mdk
-- really fix drakxtools build for ppc & sparc
-- use sysfs to detect firewire devices thus fixing eth1394 detection
-  (blino)
-- drakconnect (blino):
-  o ensure iftab is always up-to-date
-  o fix spurious ifcfg-ippp0 creation
-- net_monitor (blino):
-  o do not assume internet isn't configured if obsoleted cnx scripts
-    do not exist
-  o fix connect button sensitivity
-  o watch connection time, not disconnection time
-- printerdrake:
-  o added fully automatic, non-interactive, X-less print queue set up
-    by the "autosetupprintqueues" command, preferrably to be started
-    by hotplug
-  o fix file check for package installation
-  o fix problem of Brother laser printer on parallel port not showing
-    its name in auto-detection result.
-  o let printer name, description, location be entered after
-    determining the model in the add printer wizard
-  o let default print queue name be derived from the model instead of
-    being "Printer", "Printer1", ...
-  o simplify print queue name generation in non-interactive printer
-    setup
-  o fix "Previous" button in the test page step of the add printer
-    wizard
-- XFdrake: do not set DRI mode anymore which is not needed anymore
-  with latest PAM
-
-* Thu Aug 19 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.11mdk
-- drakconnect: use mac_ieee1394 descriptor in iftab for firewire links
-  (WIP) (oblin)
-- fix drakxtools build for ppc & sparc
-- keyboarddrake: fix it not modifying xkb (pixel)
-- printerdrake:
-  o fix crash
-  o prevent potential crashes (blino)
-  o do not ignore some internal errors (blino)
-  o fix unloaded "usblp" kernel module before local printer
-    auto-detection (blino)
-  o do not install anymore gimpprint (included in gimp2_0) (till) 
-  o do not configure GIMP and OpenOffice.org which were patched so
-    that they do not need anymore to be configured regarding print
-    queues (till)
-  o text fix for scanners in HP's multi-function devices (till)
-- service_harddrake: check usb controllers on boot (oblin, #9613)
-
-* Wed Aug 18 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.10mdk
-- drakconnect (oblin):
-  o do not write 'ifcfg-Manually load a driver' file
-  o fix sagem pty in pppd config
-  o prevent boot from timeoutingforever if modem can't be synchronized
-- localedrake: fix default IM setting when switching language (#10831)
-- net_applet: fix tooltip's messages
-- harddrake: add a PCMCIA controllers class
-
-* Tue Aug 17 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.9mdk
-- drakboot:
-  o install acpi and acpid if needed (pixel, #10760)
-  o allow to choose net profile in advanced mode (oblin)
-  o enable to allow to choose a video mode if boot is not graphical
-    while configuring bootsplash (oblin)
-- drakbug: better wrapping
-- drakconnect (oblin):
-  o do not use noipdefault pppd option for pptp connections
-  o fix pppoe with sagem ADSL modem
-  o write MAC addresses into /etc/iftab
-  o pppoe/pptp fixes
-- drakroam: support multiple roaming daemons support (oblin)
-- drakupdate_fstab: fix adding usb medias (oblin, #10399)
-- drakvpn: do not assume drakvpn is already configured if the tunnel
-  file is made of comments only (oblin)
-- localedrake: handle turkmen and tatar (pablo)
-- net_monitor:
-  o let's be more l10n-friendly
-  o fix default connection time (Fabrice FACORAT)
-- XFdrake (pixel):
-  o do not use XF86Config-4 anymore
-  o handle /etc/X11/xorg.conf
-- typo fixes (#10713, ...)
-
-* Wed Aug 11 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.8mdk
-- bootloader-config: log command on mkinitrd faillure
-- drakbug (olivier):
-  o update product list and fix case (bugzilla is case sensitive)
-  o fix product, component and version for bugzilla
-  o fix bugzilla url
-- drakhelp (daouda):
-  o use webclient-kde instead of konqueror
-  o add epiphany browser
-- drakroam:
-  o initial import of wlandetect version, from Austin Action
-- mousedrake, diskdrake: create /etc/udev/conf.d/xxx.conf as well as
-  devfsd rules (pixel)
-- net_monitor:
-  o add a horizontal separator in stats to prevent visual disguts
-    between supposed non aligned labels
-  o fix looking aka vertical alignment of labels (Fabrice FACORAT, #10300)
-  o fix resizing (Fabrice FACORAT, #10300)
-- XFdrake: s/XFree/Xorg/ (pixel)
-
-* Mon Aug  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.7mdk
-- diskdrake: switch from raidtools to mdadm (pixel)
-- drakboot: sort themes, users and WMs lists
-- drakupdate_fstab: do not complain about ips in /etc/fstab (pixel)
-- localedrake:
-  o changed default font for gb2312 (Funda Wang)
-  o rename the "More" button as "Other Countries" (pixel)
-- net_applet:
-  o do not die when gateway canot be guessed (Joe Bolin)
-  o fix status toolip
-  o allow multiple instances, but only one per user (Joe Bolin)
-
-* Fri Aug  6 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.6mdk
-- add a 6px border around scrolled TextViews (Fabrice FACORAT, #10561)
-- drakbackup: fix crash when selecting an entry in pull down menus
-- localedrake:
-  o fix configuring IM
-  o fix x-unikey support (Larry Nguyen)
-
-* Fri Aug  6 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.5mdk
-- drakclock: if ntp is used, get the new time before updating the
-  hwclock (Emmanuel Blindauer, #10537)
-- drakconnect (oblin):
-  o install kdenetwork-kppp-provider when configuring a modem
-  o fix external ISDN modem configuration (Anthill #1033)
-  o use ifup/ifdown rather than restarting the network service for
-    ADSL & ISDN
-- draksound:
-  o add support for ALSA on PPC and SPARC
-  o update sound drivers list
-  o map dmasound_pmac <=> snd-powermac (Christiaan Welvaart)
-- fix autologin somewhat (pixel)
-- localedrake:
-  o add x-unikey support for Vietnamese
-  o switch korean to scim-hangul IM by default
-- update ppc support (Christiaan Welvaart, pixel)
-- XFdrake: replaced XFree86 and XFree with Xorg (pixel, #10531)
-
-* Wed Aug  4 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.4mdk
-- don't set /etc/sysconfig/desktop anymore, configure ~/.wmrc,
-  ~/.gnome2/gdm and ~/.desktop instead (pixel)
-
-* Tue Aug  3 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.3mdk
-- bootloader-config (pixel):
-  o try to keep the order of kernel options
-  o don't allow unknown kernel names to mess everything
-  o handle win4lin kernels
-- draksec: sanitize GUI:
-  o upcase fields values
-  o fix spacing issues
-- localedrake:
-  o fix current IM setting reading
-  o reset IM setting when switching to a new IM
-  o support nabi input method too
-- net_applet: automatic launch for KDE, GNOME and IceWM (daouda)
-- misc typo fixes
-- diskdrake: fix LMV resizing (anthill #994) (pixel)
-- service_harddrake: fix nuking x.org config on 2.4.x <-> 2.6.x kernel
-  switch (#10487) (pixel)
-
-* Fri Jul 30 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.2mdk
-- drakbackup (stew):
-  o fixes Anthill #1009 and #1010 (DVD recording, disk quota)
-  o direct-to-tape enahancement
-- drakconnect:
-  o do not restart the network service if ethernet modem
-  o only restart network for ADSL if we use an ethernet modem
-  o fix sagem ADLS modem support (olivier)
-- draksec: sync with msec-0.44
-- draksplash:
-  o do not crash when the image format is unknown
-  o fix preview refresh
-- localedrake:
-  o enable to choose input method in advanced mode
-  o support im-ja input method too
-- service_harddrake: do not offer to configure mouse if we've already
-  automatically reconfigure it b/c of 2.4.x vs 2.6.x switch
-
-* Thu Jul 29 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10.1-0.1mdk
-- diskdrake: fix Compaq Smart Array support (pixel)
-- drakauth: misc (vincent)
-- drakbackup, drakTermServ: fix crashes on append_set (stew)
-- drakbug: (daouda)
-  o scroll down text while typing
-  o many cleanups
-  o stable releases are 'Official' and 'Community'
-- explanations: only log succesfull renamings
-- harddrake GUI: do not automatically configure removable media but
-  use diskdrake
-- modules: read modutils or module-init-tools config depending on
-  which kernel is run (pixel)
-- net_monitor: save/restore options
-
-* Wed Jul 21 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-57mdk
-- drakauth (vincent):
-  o restart services if needed
-  o describe authentification kinds
-  o modify nss_path one to sub config winbind for AD
-- drakconnect: misc bug fixes (olivier)
-- localedrake: fix xmodifiers setting which is broken since
-  perl-MDK-Common-1.1.13-1mdk
-- net_monitor:
-  o fix GraphicalContext memory leak (olivier)
-  o translate connection type (Fabrice Facorat)
-  o fix spacing (from Fabrice Facorat, #10300)
-
-* Mon Jul 19 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-56mdk
-- bootloader-config (pixel):
-  o save prior boot loader config file (#10072)
-  o don't unset prompt when timeout is undefined (and don't care when
-    timeout is 0)
-  o also add long name when adding add short name
-- net_monitor:
-  o add a border spacing of 5 pixel (Fabrice Facorat, #10299)
-  o disable the connect button if up interface is found (there is
-    currently no reliable way to find the gateway interface)
-    (olivier blin)
-  o use ifup/ifdown to connect/disconnect (olivier blin)
-  o no need to be root to monitor connection (olivier blin)
-- drakconnect (olivier blin):
-  o make connection status check work as non root
-  o do not write wireless encryption key if empty
-  o use blacklist too for adsl connections
-
-* Sat Jul 17 2004 Daouda LO <daouda@mandrakesoft.com> 10-55mdk
-- remove historical consolehelper files (pam.d and console.apps)
-
-* Thu Jul 15 2004 Olivier Blin <blino@mandrake.org> 10-54mdk
-- drakboot: use bootloader and Xconfig instead of detect-resolution
-- net_applet:
-  o use drakconnect to configure network
-  o use 'ip route show' to find the gateway device when no GATEWAYDEV
-    is defined
-- drakauth: add "Active Directory" through winbind (pixel)
-- bootloader-config: fix installation on floppy (#10260) (pixel)
-- drakedm: typo fix (lost -> lose) (rvojta)
-
-* Thu Jul  8 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-53mdk
-- bootloader-config (pixel):
-  o nicer "usage: ..." 
-  o add actions "add-entry" and "remove-entry"
-  o add option --label
-  o add option --chainload
-  o rename --vmlinuz to --image
-  o remove unneeded spaces in append=" foo"
-  o handles "optional" in LILO
-- drakbackup: fixes for Anthill #927 & #929 (filenames with spaces,
-  .backupignore, gui behavior)
-- drakboot: update bootsplash even if framebuffer was disabled (oblin)
-- XFdrake: add 1024x480 (pixel, #5192)
-- redo modules managment (prepare for reading either modprobe.conf or
-  modules.conf based on the running kernel version) (pixel)
-- fix build with new glibc
-
-* Mon Jul  5 2004 Pixel <pixel@mandrakesoft.com> 10-53mdk
-- drakxtools-backend needs ldetect-lst (for complete_usb_storage_info())
-
-* Mon Jul  5 2004 Pixel <pixel@mandrakesoft.com> 10-52mdk
-- ensure proper upgrade: explictly tell urpmi that old drakxtools-newt
-  conflicts with drakxtools-backend
-- drakauth: more features (vincent guardiola)
-- drakconnect: pptp support (#6515) (olivier blin)
-- localedrake: configure menu-method's language too so that altering
-  language is done for KDE menu entries too (instead of just programs'
-  messages) (Thierry Vignaud)
-
-* Thu Jul  1 2004 Pixel <pixel@mandrakesoft.com> 10-51mdk
-- create package drakxtools-backend
-- bootloader configuration: misc fixes (pixel)
-- XFdrake: fix typo causing multiple "Keyboard" entries in XF86Config
-  (pixel, #10163)
-
-* Thu Jul  1 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-50mdk
-- drakupdate_fstab (oblin): fix moving mount point (#6982, #10175)
-- drakauth: for Active Directory, allow: Kerberos, SSL/TLS, simple and
-  anonymous (pixel)
-- net_monitor (oblin):
-  o always display a speed label for transmitted graph
-  o allow the user to use different scales for received and
-    transmitted (#10177)
-  o always draw an arrow next to transmitted amount
-
-* Tue Jun 29 2004 Pixel <pixel@mandrakesoft.com> 10-49mdk
-- add bootloader-config (used by bootloader-utils and bootsplash scripts)
-- drakboot (pixel):
-  o major backend rewrite b/c of code sharing with new installkernel
-  o when adding a new kernel, have a nicer new name for conflicting
-    entry
-  o when modifying kernel parameters in all entries, skip the
-    "failsafe" entry (#10143)
-  o when modifying a symlink, ensure we also use the long name for the
-    old symlink in the existing entries
-- drakconnect (Olivier Blin):
-  o never disable "DHCP host name" entry box, it shouldn't be linked
-    with "Assign host name from DHCP address" checkbox (#2759, #9981)
-  o unblacklist sis900 since its link beat detection works with latest
-    kernels
-- draksound: remove unneeded "above" lines in modules::write_conf
-  (Olivier Blin) (#8288)
-- ugtk2 layer: catch missing wizard pixmap, otherwise we end up with
-  unshown windows and error messages can't pop up (pixel)
-- don't require mkbootdisk
-
-* Wed Jun 23 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-48mdk
-- drakboot (oblin):
-  o ask for bootloader choice when framebuffer isn't configured (#9925)
-  o do not update bootsplash in autologin wizard
-- drakclock: be mouse wheel aware (oblin, #9926)
-- drakconnect (olivier blin):
-  o blacklists the sis900 driver (#9233) for network hotplugging
-  o properly handle ascii WEP keys (#9884)
-  o rephrase zeroconf dialog (cybercfo)
-- drakxtv: fix tv driver not loaded on boot (oblin, #9112)
-- localedrake: new default IM for CKJ
-  o set up SCIM for chinese
-  o set uo SCIM+UIM for japanese
-- mousedrake: load usbhid instead of hid is now named (pixel, svetljo)
-- XFdrake (pixel):
-  o better auto monitor config
-  o sync with bootsplash's detect-resolution
-
-* Tue Jun 22 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-47mdk
-- add net_applet (daouda)
-- drakconnect: update ADSL ISP database (baud <baud123@tuxfamily.org>):
-  o default to pppoa method whenever encapsulation is 6 (PPPoA VCmux),
-  o default to pppoe method whenever encapsulation is 1 (PPPoE LLC)
-  o add new ISP entries : Belgium ADSL Office, Brasil (4 ISP),
-    Bulgaria ISDN/POTS, Greece, Switzerland BlueWin / Swisscom Telecom
-    Italia/Office Users, Turboline Austria Telstra,
-- harddrake2: do not display version number in title bar
-- shorewall configuration: accept from fw to loc (florin)
-
-* Mon Jun 21 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-46mdk
-- harddrake service:
-  o do not uselessy fork shells
-  o faster auto mouse reconfiguration on major kernel switch
-  o fix logs of newly added hardware
-  o fix mouse autoconfiguration done on every boot instead of on 2.4.x/2.6.x
-    switches
-  o handle newly added wireless network card (broken since early 2004/02)
-  o log error when we cannot run the config tool or when it isn't executable
-  o only log about nv <-> nvidia swtich only if we do have to perform it
-- harddrake GUI:
-  o display media type for mass storage devices
-  o enhanced data for mice and hard disks
-  o fix undisplayed fields
-  o show disk ID if we cannot guess its vendor string from it
-  o show splited vendor and description fields for USB hard disks too
-  o really ensure that "identification" section is displayed first
- 
-* Fri Jun 18 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-45mdk
-- authentication: more LDAP work (pixel)
-- drakbackup: fix .backupignore issue (stew)
-- drakupdate_fstab: add support for floppies
-- harddrake service:
-  o mouse: autoreconfigure it when switching between 2.4.x and 2.6.x kernels
-  o network: automatic config with DHCP of new cards
-  o removable media: automatically config
-  o x11:
-    * do not automatically swtich from nv to nvidia driver (b/c the
-      nvidia driver is buggy on some machines)
-    * automatic configuration of new card
-  o only stop the boot progress bar if we've a non automatic tool to run
-- harddrake GUI:
-  o show more data on SCSI disks
-  o do not display USB disks in both harddisks and unknown sections
-  o fix cpu and SCSI hd help
-  o show right driver for USB devices (from /proc/bus/usb/devices)
-  o enhanced help
-  o show detailled data on bus connection
-- interactive layer: display "cancel" button instead of "previous" in
-  wizards' first step
-
-* Mon Jun 14 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-44mdk
-- diskdrake: fix hde devfs link (pixel)
-- drakconnect: start to make strings more helpfull
-- drakperm: enable drag 'n drop (only when looking at customized settings)
-- draksec: do not show empty pages in notebook if security level is not set
-- draksplash: make it work again...
-- harddrake2:
-  o do not list usb hard disk as unknown (fix doble entries)
-  o fix misdetection of nvidia nforce ethernet cards (broken since forcedeth
-    replaced nvnet on 2004-01-21 in MDK10's ldetect-lst)
-  o ethernet card detection: only rely on driver for matching ethernet cards,
-    thus preventing mislisting of other/unwanted devices and enableing to catch
-    ldetect/ldetect-lst/detect_devices bugs where some devices are *not* seen by
-    drakx and drakconnect.
-  o display more data about hard disks (geometry, number of primary/extended
-    partitions)
-
-* Wed Jun  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-43mdk
-- drakauth: add "Active Directory" authentication (WIP) (pixel)
-- drakbackup: (stew)
-  o deal with kernel ring buffer that is flooded with msgs for tape
-    device detection (#9877)
-  o GUI fixes
-  o enforce binary ftp transfers
-- drakconnect: (poulpy)
-  o switch ONBOOT to on/off for isdn and adsl connections
-  o new way to specify how to up connection for pppoe(xDSL) and
-    others(ADSL)
-  o rename /etc/ppp/peers/adsl as /etc/ppp/peers/ppp0 as we now use
-    ifup-ppp for adsl, it will look for ppp0
-- drakservices: add descriptions for NFS and SMB (#9940) (pixel)
-- harddrake service: run it earlier (aka before network service)
-- XFdrake: add resolution 1920x1200 called WUXGA (used by Dell Laptops
-  Inspiron 8500, 8600 and Latitude D800) (#6795) (pixel)
-- XFdrake, drakedm: switch to x.org  (pixel)
-
-* Tue Jun  1 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-42mdk
-- handle the nfs/smb service disabled (Olivier Blin)
-- drakconnect:
-  o handle interface w/o ip addresses
-  o make LAN wizard more user friendly: move "manual choice" after 
-    detected interfaces
-  o detect again ethernet interfaces that are down (got broken in 10-38mdk)
-- drakboot:
-  o do not write partial GRUB config file (thus garbaging previous config) if an
-    error occured
-  o fix "two windows appears on canceling after an exception" bug
-
-* Fri May 28 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-41mdk
-- drakconnect:
-  o fix protocol switching from manual to DHCP when stepping back in
-    wizard
-  o read VLAN and IP aliased interfaces config too
-- drakbackup: fix typo in tape restore (Federico Belvisi).
-
-* Fri May 28 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-40mdk
-- drakconnect:
-  o blacklist loopback interface in new detection scheme
-  o switch from internet service to regular ifcfg files (poulpy) (WIP)
-  o fallback on sysfs in order to get driver and card description when
-    ethtool is not supported (eg: ipw2100 driver for intel centrino)
-
-* Thu May 27 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-39mdk
-- diskdrake (pixel):
-  o allow /home on nfs (#7460)
-  o disable package instead of removing nfs-utils or samba-server
-    (when "diskdrake --fileshare" disables a export kind) (#9804)
-
-* Thu May 27 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-38mdk
-- detect aliased network interfaces too
-- drakfirewall: handle BitTorrent (robert vojta)
-- keyboardrake (pablo):
-  o support more keyboards
-  o Nepali uses devanagari script
-- localedrake: handle Latgalian language (pablo)
-- net_monitor: ignore sit0
-- switch Japanese input method to "uim" (pablo)
-
-* Tue May 25 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-37mdk
-- drakbackup: fix dropped .txt files when running mkisofs (stew)
-  (Anthill #799)
-- drakconnect (#9669):
-  o prevent identification mismatch on ethtool results
-  o fix card name lookup when driver does not support GDRVINFO command
-    from ETHTOOL ioctl and there's only one card managed by this
-    driver
-- switch from deprecated OptionMenu into new ComboBox widget
-
-* Mon May 24 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-36mdk
-- ugtk2:: still provide compat stuff for OptionMenu widget (#9826)
-- drakTermServ: add /etc/modprobe* mount points for client hardware
-  config (stew)
-
-* Wed May 19 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-35mdk
-- authentication:
-  o fix winbind configuration and do the same for LDAP
-    and NIS (vincent guardiola, pixel)
-  o install autofs for nis authentication (florin & fcrozat)
-- diskdrake: handle LABEL=foobar in /etc/fstab (pixel)
-  (ex2/3 only for now, no xfs)
-- drakclock: do saner check for ntp package (Robert Vojta)
-- drakconnect:
-  o fix speedtouch ADSL model (using kernel mode) (poulpy)
-  o better LAN vs wireless filtering by using SIOCGIWNAME ioctl)
-  o handle ipw2100 wireless driver
-  o do not offer to set DOMAINNAME2 since it is never saved nor read
-    (#9580)
-  o kill "speedtouch and ISDN only work under 2.4 kernel" warnings
-    (poulpy)
-- drakfirewall: open more ports for samba
-- harddrake service: do not run XFdrake in automatic mode
-- misc cleanups & bug fixes (pixel)
-- scannerdrake: fix firmware installation (till)
-- XFdrake (pixel):
-  o can now configure monitors on heads > 1
-  o do not succeed automatic configuration (not auto_install) when
-    there is many cards (as requested by Joe Bolin)
-  o speed-up monitor choosing dialog when {VendorName} is undef
-  o vmware doesn't like 24bpp (#9755)
-  o defaults to the greatest depth rather than 24
-- do not prefer devfs names when reading /proc/mounts (which uses
-  devfs names) (pixel)
-- ugtk2 layer: transparently replace obsolete OptionMenu widget by the
-  new ComboBox widget
-
-* Tue May  4 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-34mdk
-- drakconnect:
-  o fix last step of interface destruction wizard
-  o wizard: take ISDN protocol into account for people outside Europe
-    to use it (poulpy)
-- drakupdate_fstab: fix adding twice an entry in fstab, one with the
-  old name, one with the devfs name (pixel)
-- XFdrake: kill XFree86 3.x support (pixel)
-
-* Fri Apr 30 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-33mdk
-- create ~/tmp if needed when running a program
-- device managment: fix sdX <=> scsi devices mapping (especially for
-  USB devices) (pixel)
-- drakclock: time is displayed as HH:MM:SS with RTL languages
-- drakconnect (poulpy):
-  o manage interface: more gui layout fixes
-  o try harder to locate firmware on windows partition (#3793)
-  o no need to up ippp0 in net_cnx_up, it's been up'ed at startup
-- harddrake gui: list SATA controllers in their own category (anthill
-  #741)
-- harddrake service: log removed/added hw
-- localedrake: use utf8 if any of the languages chosen is utf8, not
-  only the main one (pixel)
-
-* Fri Apr 23 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-32mdk
-- diskdrake, XFdrake: make --auto really not interactive
-- drakconnect:
-  o wizard: fix ISDN support (poulpy)
-  o manage interface: smoother layout
-- drakxtv:
-  o fix brown paper bag bug regarding tv cards detection
-  o sync card and tuner lists with 2.6.6-rc2
-- harddrake GUI: split USB sontrollers and ports
-  o new data structure
-- harddrake service: autoconfigure X11, sound and removable media
-- log more actions regarding modules managment in explanations
-
-* Tue Apr 20 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-31mdk
-- drakbackup: some drives don't return "ATIP info from disk" (stew)
-- drakclock: check /etc/init.d/ntpd instead of /etc/ntp.conf for ntp
-  installation (daouda)
-- drakfont: fix font importing (#9423) (dam's)
-- drakconnect (manage interface): fix insensitive IPADDR, NETMASK and
-  GATEWAY fields by default are not sensitive by default in DHCP
-  (broken by #8498 fix) (poulpy�
-
-* Thu Apr  8 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-30mdk
-- fix inverted translations in french catalog (#8217)
-- fix drakxtools postuninstall script
-- drakbackup (stew):
-  o remove config-info (will be in a man page)
-  o reuse more code from ugtk2 layer regarding cursors managment
-  o combine/rework restore code
-- drakTermServ (stew):
-  o do not move existing dhcpd.conf
-  o add an include for terminal-server instead
-- drakups: update to new libconf-0.32 API (dam's)
-- harddrake service: log nv<=>nvidia switches
-- localedrake: set default font to use in KDE for devanagari and
-  malayalam scripts
-- ugtk2: fix faillure with perl-Gtk+-1.04x (#9411)
-
-* Mon Mar 29 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-29mdk
-- harddrake service: skip nv/nvidia test when there's no nvidia card
-
-* Mon Mar 29 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-28mdk
-- harddrake service: fix disabling nvidia driver (#9300)
-
-* Fri Mar 26 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-27mdk
-- drakconnect:
-  o fix some bugs in ISDN configuration
-  o warn than speedtouch only works with 2.4.x kernels for now
-  o fix "manage interface" that broke speedtouch configuration
-  o blacklist b44 for ifplugd
-- drakboot blacklist again Savage gfx cards, they're broken again with
-  lilo
-
-* Wed Mar 24 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-26mdk
-- diskdrake: tag removable medias as noauto in fstab file (pixel, #9076)
-- drakboot: add nolapic support option (planel)
-- drakclock (Robert Vojta, #9141):
-  o display current timezone
-  o sort servers
-- drakclock, drakperm: GUI fixes (Robert Vojta: #9141, #9153)
-- drakconnect:
-  o complain louder about supported kernels for ISDN cards
-  o enable to delete ADSL and ISDN connections
-  o do not complain anymore about kernel when using bewan adsl modems
-    since they works now with 2.6.x kernels
-  o do write drakconnect config file when there's only one configured
-    interface (#8998)
-  o fix speedtouch support: use kernel mode on 2.6.x kernels
-- drakgw: fix drakgw removing MII_NOT_SUPPORTED parameter from ifcfg
-- drakTermServ: fix button layout
-- drakxtv:
-  o read current configuration (Scott Mazur)
-  o fix setting options for bttv instead of saa7134 (#5612)
-  o fix saa7134 detection (#5612)
-  o fix wiping out /etc/modules.conf (Scott Mazur)
-  o default canada-cable to NTSC (Scott Mazur)
-  o handle tv cards managed by cx88 and saa7134 (#9112)
-  o use right device (#3193)
-  o offer to set the user to config (#3193)
-  o sync with 2.6.3-4mdk
-- firewall: do not write the REDIRECT squid rules if one has only one
-  NIC connected to the net zone (florin)
-- harddrake service: switch between nv and nvidia driver if commercial driver
-  isn't installed
-- keyboarddrake: az, tr and tr_f needs XkbOptions 'caps:shift' (pixel)
-- logdrake: fix non first searches (#9115)
-
-* Fri Mar 19 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-25mdk
-- add missing icons for localedrake menu entry (dadou)
-- diskdrake: fix compaq smart array support (pixel, #9029)
-- drakboot: reread current bootsplash config (olivier blin, #8888)
-- drakconnect:
-  o always offer to restart adsl connections
-  o fix bewan adsl modem support by providing an ad-how
-    /etc/ppp/options
-  o only warn about the fact we need 2.4.x kernel
-    * when we're under 2.6.x
-    * for bewan modem (not for other adsl modems) and pci rtc modems
-  o only kill pppoa for sagem modem (fix bewan modem shutdown)
-- draksound: install alsa-utils if needed (#6288)
-- include drakups again
-
-* Wed Mar 17 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-24mdk
-- set window icon
-- diskdrake: (pixel)
-  o fix "xp does not boot anymore" (#7302, #7959, #8891)
-  o add --change-geometry=<device>=[<cylinders>,]<heads>,<sectors>
-  option in order to allow forcing the geometry used in the partition
-  table. This allows helping poor Windows booting using old int13
-  function 2.  This should work when Windows has not been resized.
-- drakclock: fix server lookup (#8846)
-- drakconnect:
-  o do not pass eth interface and user to adsl-start, they're already
-    provided in pppoe.conf (#2004)
-  o fix pci modem support
-  o fix SmartLink modem managment (#8959)
-  o really fix modem symlink (#7967)
-  o try harder to get a name (in wizard) and information (in manage
-    interface) for cards whose driver do not support ethtool ioctl
-  o update wanadoo dns servers ip addresses
-  o wizard:
-    * bewan support
-    * fix adsl stop on pppoa links
-    * preselect pppoa for bewan modems
-    * for ADSL Bewan, ISDN and PCI modems, warn that only 2.4.x
-      kernels are supported
-    * only show encapsulation parameter for sagem modem
-  o "internet access" window:
-    * enable to alter hostname
-    * do not offer to alter domain name since this is achievable
-      through FQDN
-- drakfont: make subdialogs be transcient for main window when not
-  embedded
-- drakedm: fix dm restart
-- draksound (olivier blin, #8501):
-   o do not alter oss<->alsa drivers mapping table
-   o when current driver doesn't match current sound card, list
-     alternatives for both current driver and the default driver
-- drakTermServ: fix misnamed inittab (stew)
-- drakupdate_fstab: choose wether to use supermount is now based on
-  variable SUPERMOUNT in /etc/sysconfig/dynamic (pixel)
-- harddrake2:
-  o show module for system bridges if it's not unknown (aka not
-    managed by kernel core)
-  o update icons
-- localedrake: list Filipino, Low-Saxon and Kyrgyz (pablo)
-- logdrake: fix wizard
-- service_harddrake:
-  o remove /etc/asound.state *before* restarting sound service
-  o add agpgart modules to modprobe.preload if needed
-
-* Mon Mar 15 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-23mdk
-- drakbackup: (stew)
-  o install extra packages when using wizard too
-  o report error on key transfer in GUI if needed
-- drakboot:
-  o list yes/no for autologin in a more intuitive way, that is yes is
-    grouped with user and wm pull down menus (robert.vojta@qcm.cz,
-    anthill #390)
-  o always generate a precise entry using the precise version and
-    remove the linux-2.4 or linux-2.6 (but keep the "linux" entry)
-    (pixel)
-- drakclock: make the ntpdate after stopping the ntpd (manu@agat.net,
-  #8141)
-- drakfont: make "install" button be insensitive when there's no
-  selected fonts
-- drakconnect:
-  o fix misdetection of some network cards (aka do not try to match a
-    physical device when SIOCETHTOOL ioctl is not supported) (#8010)
-  o fix missing quotes around wireless encryption key (#8887)
-  o wizard:
-    * do not list anymore wireless cards in LAN connection, only in
-      wireless connections
-    * fix unlisted ADSL modems when there's no network card (#8611)
-    * handle orinoco_pci and orinoco_plx driven card as wireless ones
-    * skip "start on boot" step for LAN (already managed by network
-      scripts)
-    * write ether conf later on QA request
-  o renew "internet access" window:
-    * sanitize buttons layout (#8637)
-    * sanitize fields layout
-    * fix config reading/writing
-    * fix connection status (#7800)
-    * fix unlisted first dns server
-  o manage interface:
-    * do not write IPADDR, NETMASK and NETWORK fields in ifcfg-ethX
-      when using DHCP (fix writing "no ip"/"no netmask" in config file)
-    * default protocol is dhcp (fix fields checking when an interface
-      isn't yet configured)
-    * fix gateway setting (#6527)
-- drakfirewall, drakgw: add ppp+ and ippp+ at the interfaces list
-  (florin) (#8419)
-- localedrake: always define KDM fonts dependending on encoding
-  (pablo, #8714)
-- logdrake: fix explanations in mcc that got broken by #8412 speedup
-- printerdrake: install "scanner-gui" instead of "xsane" when it sets
-  up an HP multi-function device (till)
-- scannerdrake: install "scanner-gui" instead of "xsane", so that
-  scanning GUI actually used can be determined by the system
-  environment (till)
-
-* Thu Mar 11 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-22mdk
-- fix imm & ppa managment on kernel 2.6 (pixel)
-- no entry in fstab for zips (now cleanly done by hotplug) (pixel)
-- drakbackup (stew):
-  o fix crash on first wizard run (#8654)
-  o deal with mixture of formats on restore
-  o do not save host passwd when user requests not to (#8700)
-  o fix issue with first incremental pass not using base as
-    comparison
-  o support for plain tar (#8676)
-- drakconnect wizard:
-  o start to handle bewan ADSL modems
-  o port old ISDN wizard upon new wizard layer
-- drakfirewall, drakgw: network card name rather than just ethX in device list
-  (florin and me)
-- drakgw (florin):
-  o add some tests for the REDIRECT squid rules
-  o fix previous button on first step (anthill #386)
-  o fix "sharing already configured" #8669 (florin)
-  o fix the proxy REDIRECT shorewall rule,
-  o fix the disable, enable functions
-  o fix the shorewall interfaces configuration
-  o really enable the proxy squid
-- draksplash: make it works again
-- drakTermServ (stew):
-  o add gdm user if needed
-  o autologin warning
-  o copy server X keyboard config to client
-  o default kernel version
-  o default thin client setup
-  o do not destroy "fat" client inittab
-  o use std banner
-- drakgw: fix previous button on first step (anthill #387)
-- harddrake2: fix ISDN cards detection
-- keyboardrake: list jp106 keyboard too (pablo)
-- logdrake: searching speedup (#8412)
-- printerdrake (till):
-  o let URIs listed by "lpinfo -v" be shown in the dialog for entering
-    a URI manually
-  o make first dialog be somewhat clearer
-- XFdrake: catch exception (#8726) (pixel)
-
-* Wed Mar  3 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-21mdk
-- drakconnect: add australia in adsl providers db (#5056)
-- support cryptoloop and aes when using encryption on kernel 2.6 (pixel)
-
-* Wed Mar  3 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-20mdk
-- drakbackup: use preferred conf file read/write method (stew)
-- drakconnect: hide dns settings by default when using dhcp
-- drakupdate_fstab (pixel):
-  o fix device removal
-  o log calls
-- printerdrake: fix HPOJ configuration when manually setting up a
-  device (till)
-
-* Tue Mar  2 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-19mdk
-- fix doble ISDN detection (#6535)
-- drakconnect: fix modem symlink (#7967)
-- drakboot --boot is now a wizard
-- printerdrake: fix missing "default settings" option in the printer
-  options dialog (till)
-
-* Tue Mar  2 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-18mdk
-- drakboot (pixel):
-  o if the default bootloader entry is invalid, choose another one
-  o remove "VT8751 [ProSavageDDR P4M266] VGA Controller" (0x5333,
-    0x8d04) from graphical lilo blacklist (#8133)
-- drakconnect:
-  o fix pci modem type matching
-  o list pump in dhcp clients list (synced with ifup one)
-  o preselect first availlable dhcp client (according to ifup priority
-    list)
-
-* Tue Mar  2 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-17mdk
-- logdrake mail alert: fix crash due to icon renaming
-
-* Mon Mar  1 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-16mdk
-- adduserdrake: default to "man" icon (pixel)
-- drakconnect manage interface: fix bootproto filling (#8498)
-- harddrake2: update icons
-- printerdrake (till):
-  o do not configure the GIMP-Print plug-in on more than 50 users (#6423)
-  o fix no "ptal:/..." in manual device URI list (#8483)
-- scannerdrake (till): fix firmware not found by "gt68xx" SANE backend
-  (#7242)
-
-* Mon Mar  1 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-15mdk
-- left align labels
-- drakfirewall: remove the masq zone and add policies, rules only if
-  there is an interface in loc (florin)
-- draksec:
-  o sanitize main explanation text
-  o prevent pull-down menus to fill availlable space in packtables
-- printerdrake (till):
-  o fix HPOJ config
-  o support new HP multi-function devices
-  o better Lexmark X125 printer support
-
-* Fri Feb 27 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-14mdk
-- drakautoinst: support two-floppies boot style for replay_install
-  disk as well (gc)
-- drakbackup: fix tape backup/restore (#8284) (stew)
-- drakconnect: fix crash on manually choosing modem again
-- printerdrake: better layout for about dialog box (dadou)
-
-* Thu Feb 26 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-13mdk
-- drakconnect wizard:
-  o never delete up/down scripts
-  o only write internet service if start at boot requested
-- banners: prevent shadow to be darker on theme switches
-
-* Thu Feb 26 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-12mdk
-- drakbackup: use ATAPI:/dev/hdX for both 2.4/2.6 compatibility (stew)
-- drakconnect wizard:
-  o do not ask for apply settings since most just have been written
-  o only write ether config for lan...
-  o install needed packages for pppoa, pppoe, pptp
-- drakTermServ (stew):
-  o really filter symlinked kernels. nohup the dm restart
-  o don't let any kernel symlinks be visible for making NBIs
-- harddrake-ui package: requires sane-backends so that scanner
-  detection works smoothly (#8305)
-- localedrake: use xim by default for CJK languages for which we don't
-  ship good enough native gtk2 input methods (pablo)
-
-* Wed Feb 25 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-11mdk
-- harddrake service: 
-  o look at sound cards changes on bootstrapping
-  o when sound card is added/removed, delete current sound levels so
-    that sound service reset it to sg sane
-
-* Wed Feb 25 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-10mdk
-- drakbackup: rework CD recording for ATA device setup (stew)
-- drakconnect manage interface (poulpy):
-  o modem configuration has been completed
-  o write /root/.kde/share/config/kppprc for any local change
-
-* Tue Feb 24 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-9mdk
-- drakconnect: alter both /etc/analog/adiusbadsl.conf and
-  /etc/eagle-usb/eagle-usb.conf when configuring sagemXXX
-
-* Tue Feb 24 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-8mdk
-- drakconnect wizard:
-  o ethernet: fix module lookup for pcmcia cards
-  o adsl ISP db (Benoit Audouard):
-    * set default protocol to pppoa for various ISPs
-    * update 9telecom entry
-    * add encapsulation method for "tiscali 512k.fr"
-    * fix wrongly inverted encapsulation methods for "Free" isp cnx
-      offers
-- drakTermServ (stew):
-  o mknbi-set always wants a kernel version now
-  o deal with conflicts with msec > 3 and exporting / (use
-    no_root_squash).
-  o always pass a kernel to mkinitrd-net (#8216)
-  o add --restart option for terminal-server.
-- printerdrake, scannerdrake: misc gui fixes (till)
-- printerdrake (till):
-  o give clear warning/error messages if a package installation fails
-  o let printer model in first-time dialog also be shown if there is
-    no description field in the device ID of the printer
-- scannerdrake: ask user before installing packages (till)
- 
-* Mon Feb 23 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-7mdk
-- drakconnect
-  o add wizard:
-    * always write up/down scripts
-    * only write initscript when starting at boot was choosen
-    * write ethX aliases and ifup/ifdown scripts when configuring a LAN
-    connection
-  o remove wizard:
-    * when no network configuration is configured, just report it
-    * only list configured interfaces when offering to delete them
-    * keep ethX aliases b/c in order to prevent ethX be renumbered on
-      next boot
-    * down the network interface when deleting it
-
-* Mon Feb 23 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-6mdk
-- drakconnect: fix sagem8xx && speedtouch adsl modem scripts
-
-* Mon Feb 23 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-5mdk
-- drakconnect: write vci and vpi parameters in decimal base when
-  configuring speedtouch
-
-* Mon Feb 23 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-4mdk
-- drakbackup (stew):
-  o verify user has selected a cron interval and media (#8138)
-  o tweak wizard setup
-- drakconnect:
-  o misc santizing in manual module loading
-  o adsl provider db: fix vci number for Belgium and France (poulpy)
-  o wizard:
-    * modem:
-      + enable one to manually choose the serial port to use while
-        configuring modem
-      + really default to dynamic dns, gateway and ip (really fix #7705)
-      + do not overwrite current kppp settings with provider db ones
-        but on provider switch
-    * adsl: prevent having to choose between '' and 'adsl' connections
-    * ethernet: enable one to manually load a driver like expert mode
-      in old pre-10.0 wizard
-  o manage interface:
-    * modem:
-      + read kppp authentication method
-      + handle new PAP/CHAP method
-    * ethernet:
-      + handle and translate BOOTPROTO
-      + do not complain about gateway format when it's not set
-    * fix untranslated strings
-
-* Fri Feb 20 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-3mdk
-- drakconnect: fix empty vci/vpi paremeters when speetouch firmware
-  wasn't provided
-- logdrake: fix title when run from mcc (#8111)
-
-* Fri Feb 20 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-2mdk
-- drakboot/diskdrake updates regarding partition renumbering (pixel)
-- drakconnect:
-  o do not overwrite provider vpi/vci settings (poulpy)
-  o detect more sagem 8xx modems
-  o enable to refuse network restarting
-  o add "Free non degroupe 1024/256" in adsl provider db
-- drakperm: fix "current" checkbox vs "group" and "user" pull-down
-  menus
-- localedrake: better uim support (pablo)
-- modules configuration: fix some agpgart aliases issues regarding
-  2.4.x/2.6.x kernels (pixel)
-
-* Fri Feb 20 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-1mdk
-- drakconnect: fix writing modules aliases (fix broken speedtouch)
-- drakbackup: use Gnome icon order (stew)
-
-* Thu Feb 19 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.21mdk
-- drakboot: fix theme displaying under console (Olivier Blin)
-- drakconnect: since no PCMCIA cards support link status notification,
-  ifplugd should be disabled for all pcmcia cards by default (#8031)
-- XFdrake: kill spurious icons (pixel)
-- fix some wrapping (pixel)
-- do not use global scrolled window but many local scrolled windows
-  instead (pixel)
-- fix uim-xim input method (pablo)
-
-* Thu Feb 19 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.20mdk
-- fix broken "advanced" and "help" buttons (pixel)
-- switch japanese from kinput2 to uim input method
-- fix file dialog when embedded (#7984) (pixel)
-- drakbackup (stew):
-  o fix issue with multisession CDs (Anthill #349)
-  o encourage user to finish configuring media before leaving wizard.
-- drakvpn (florin):
-  o add plenty of help files, add anonymous support for sainfo
-  o add quite much help explanations
-  o add anonymous support in sainfo
-- harddrake2: sanitize buttons layout when embedded
-
-* Wed Feb 18 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.19mdk
-- diskdrake: type 0x17 can be ntfs
-- drakbackup: rework backupignore behavior (Anthill #306) (stew)
-- drakconnect
-  o wizard:
-    * do not use ifplugd on wireless connections by default
-    * fix "network needs to be restarted" step
-    * do not overwrite current wireless parameters with default
-      values
-    * tag some wireless options as advanced ones
-  o manage interface:
-    * update adsl (poulpy)
-    * sanitize buttons layout
-
-* Tue Feb 17 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.18mdk
-- new default icon for wizards banner
-- drakconnect
-  o wizard:
-    * handle atmel_cs wireless driver
-    * sort lan protocols
-  o manage interface: update (poulpy)
-- drakvpn: one can now start from scratch with ipsec.conf (florin)
-- enforce gnome button order everywhere
-- harddrake: really fix doble blanked ISDN detection
-- mousedrake (pixel):
-  o detection defaults on automatic choices
-  o fix mouse detection on kernel 2.4
-- printerdrake: fix problem that not used parallel ports were detected
-  as printers (till)
-
-* Tue Feb 17 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.17mdk
-- drakboot: remove bad entries after reading existing conf file (pixel)
-- drakclock: let's look better when embedded
-- drakconnect:
-  o wizard:
-    * explain about DNS (#7908)
-    * fix automatically found "...2" dns when network is done
-  o manage interface: check gateway entry (poulpy)
-- drakfont: new banner style
-- drakvpn:
-  o fix drakvpn logic when translated
-  o fix steps skiped b/c of translations
-  o start to sanitize gui (more user friendly labels, pull-down menus, ...)
-  o fix the ";" mark in the "Security Policies" section (florin)
-- interactive layer: don't have a scroll inside a scroll which causes
-  display pbs (#7433) (pixel)
-- printerdrake (till):
-  o recognize parallel printers also when they miss the
-    "CLASS:PRINTER;" in their device ID string (ex: Brother HL-720,
-    bug #7753)
-  o warn when there's no network access
-  o remove printer list button when there's no network also in expert
-    mode.
-
-* Sun Feb 15 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.16mdk
-- fix harddrake crash (#7897)
-- printerdrake (till):
-  o handle weird printer ID strings, as the one of the Brother HL-720
-    with empty manufacturer and description fields (#7753).
-  o recognize also "SN:" as serial number field in printer ID string
-    (HP PhotoSmart 7760, bug #6534).
-  o load the "usblp" module instead of the "printer" one on kernel
-    2.6.x
-
-* Sat Feb 14 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.15mdk
-- drakbackup: (stew)
-  o FTP restore failure feedback
-  o allow multiple catalog/file restore selection
-- drakconnect:
-  o fix automatically found "...2" dns server
-  o fix crash on canceling "already configured net device"
-    configuration (#7679)
-  o by default do not start connection at boot for modems (#7705)
-  o prevent displaying dummy empty fields in text mode (#7593)
-- harddrake:
-  o fix ISDN detection (#6535)
-  o prevent detecting twice the same devices (#4906)
-  o workaround sane-find-scanner detecting too much usb scanners
-- center popup windows (pixel)
-- don't have a wait_message above another empty wait_message when
-  probing hardware (pixel)
-- add support for embedding rpmdrake
-
-* Fri Feb 13 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.14mdk
-- drakboot: better grub support, esp. when /boot is a separate
-  partition (pixel)
-- diskdrake: reconfigure boot loader on partition renumbering
-- wizards: add relief around trees and lists
-
-* Fri Feb 13 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.13mdk
-- all tools: new banner style
-- add drakvpn (florin)
-- drakbackup: fix crash on file search, failure to report ftp error
-  (stew)
-- drakconnect:
-  o wizard:
-    * fix wireless network interfaces detection
-    * ask isp for ip and gateway by default (#7705)
-  o manage interface: (poulpy)
-    * fix adsl/eth confusion
-    * fix apply button
-- harddrake service: only probe for local printers
-- harddrake2:
-  o remove statusbar on interface team request
-  o do not force black color for fields values which badly conflict
-    with inverted accessibility themes
-- fix module dependancies problem because of 2.4/2.6 mappings, better
-  support 2.4 and 2.6 alltogether by keeping 2.4 names in modules.conf
-  (gc)
-- XFdrake: handle packages not found (#7786)
-
-* Thu Feb 12 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.12mdk
-- drakconnect:
-  o preselect right protocol for ethernet though connections
-  o only offer to connect now for ppp connections
-  o fix module retrieving when configuring an adsl connection over
-    ethernet
-- authentication: (pixel)
-  o install ldap packages *before* doing ldapsearch
-  o pam*.so modules do not have /lib/security/ prefix anymore
-
-* Thu Feb 12 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.11mdk
-- drakconnect wizard:
-  o fix choosing dhcp as adsl protocol
-  o do not allow to step forward if no network card was found
-    (workaround #7672)
-- keyboardrake: support 2.6.x kernel (pixel)
-- drakbackup: misc changes (stew)
-- draksec: fix unable to save checks when config file is empty
-- harddrake: support more webcams
-
-* Tue Feb 10 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.10mdk
-- fix poped dialogs when embedded (#7246) (pixel)
-- drakbackup/drakTermServ: misc updates (stew)
-
-* Mon Feb  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.9mdk
-- drakconnect wizard:
-  o fix unability to select gateway (#7585)
-  o detect athX interfaces too (#7531)
-- drakfont: fix crash on option toggling (#7248)
-
-* Mon Feb  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.8mdk
-- drakconnect wizard:
-  o blacklist forcedeth for network hotplug (#7389)
-  o fix ethernet devices description matching
-  o fix unwritten ethernet interface config
-  o fix empty list in "multiple internet_connexions" step
-- fix vendor/description for some Lite-On drives
-- ugtk2 layer: fix some layout (spurious space at window bottom)
-  (pixel)
-
-* Sun Feb  8 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.7mdk
-- drakx11: make XFdrake startup be instantenous for non nv|ati cards
-- drakTermServ: add PXE image support (Venantius Kumar)
-
-* Fri Feb  6 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.6mdk
-- move drakbug, drakclock, drakperm, draksec, drakTermServ,
-  net_monitor in drakxtools since they require ugtk2 (#7413)
-- workaround gtk+ bug #133489 (behaviour on click when in scrolled
-  window) (pixel)
-- drakboot: do not try anymore to set global video mode and compat
-  option
-- drakfirewall: handle ip ranges (#7172) (pixel)
-- draksound: advertize alsaconf too since sndconfig failled for cards
-  only managed by ALSA (#7456)
-- logdrake: do not fail when disabling twice the alert mail cron
-- mousedrake: allow changing protocol in standalone (pixel)
-
-* Fri Feb  6 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.5mdk
-- fix embedded apps
-
-* Fri Feb  6 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.4mdk
-- print --help on stdout rather than stderr (gc according to gnu std) 
-- diskdrake: (pixel)
-  o fix lvm support when devfs is not mounted
-  o fix lvm extent sizing (fix illegal division by 0)
-  o fix getting the output of pvs vgs lvs commands
-  o fix get_lvs() (and use lvs instead of vgdisplay)
-  o don't display start sector and cylinders used for LVs
-  o display "Number of logical extents" of LVs
-- drakbackup: provide more detailed info on files backed
-  up/ignored. (Anthill #306) (stew)
-- drakboot: write fstab for /tmp using tmpfs when "clean /tmp" is
-  chosen (pixel)
-- drakboot, drakconnect: fix some layouts
-- drakconnect wizard:
-  o fix pcmcia card config (#7401, #7431)
-  o fix wireless settings (#7432, faillure to set parameters)
-  o split wireless step into two steps since there way too much
-    options
-- draktermserv: fix user list in mdkkdm (stew)
-- harddrake: fix module parameters with kernel-2.6.x
-- keyboardrake, localedrake: fix some locales (pablo)
-- mousedrake: use protocol "ExplorerPS/2" instead of "auto" for kernel
-  2.6 (pixel)
-- XFdrake: (pixel)
-  o do not test X config under vmware (#5346)
-  o allow 24bpp for DRI (since all drivers now support it)
-
-* Mon Feb  2 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.3mdk
-- drakconnect wizard:
-  o support more wireless cards
-  o split out "wireless connection" configuration out of "lan
-    connections" path
-- logdrake: (arnaud)
-  o make cron script be able to use either local smtp server or a
-    remote one
-  o add "remove cron entry" on arnaud request
-
-* Mon Feb  2 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.2mdk
-- draconnect: preselect pppoa for speetouch again
-
-* Mon Feb  2 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 10-0.1mdk
-- harddrake: fix adsl modem detection
-- draksound: handle new aureal drivers
-- do not user ide-scsi emulation for ide ZIPs (pixel)
-- do no ide-scsi emulation for cd burners with kernel-2.6.x (pixel)
-
-* Mon Feb  2 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-28mdk
-- drakconnect:
-  o enable to set hostname even when using DHCP (#7230)
-  o handle not loaded drivers (#7273)
-
-* Fri Jan 30 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-27mdk
-- drakconnect:
-  o wizard:
-    * fix configuring unconfigured eth interfaces
-    * ignore spurious .directory entries when loading kppp provider db
-    * do not offer to select dhcp client for static interfaces
-  o manage: only show gateway for eth devices (poulpy)
-- diskdrake (pixel):
-  o fix overflows at 4GB when adding partitions
-  o tell kernel to remove the extended partition
-  o replace iocharset= with nls= for ntfs in /etc/fstab
-
-* Thu Jan 29 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-26mdk
-- drakconnect: use somewhat nicer interfaces name (eg: "eth0: 3com
-  905") in manage interface (poulpy)
-- drakTermServ: configure clients with defined IPs to set hostname so
-  gnome works (stew)
-- fix accentued characters with fr and ru locales (pablo)
-
-* Thu Jan 29 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-25mdk
-- drakconnect:
-  o wizard:
-    * fix ethernet network card list
-    * fix interface config file writing
-    * fix DHCP client installation
-    * fix static/dhcp step branching
-  o manage interface: (poulpy)
-	* fix modem login fetching
-	* use somewhat nicer interfaces name (eg: ethernet0 rather than
-	  eth0)
-     * fix adsl loading and saving
-- draksec:
-  o add help for newly introduced MAIL_EMPTY_CONTENT item
-  o notify that shell timeout is in seconds
-  o fix parsing of default values for multi argument msec functions
-- net_monitor: do not force switch to last page on network interface
-  reload
-
-* Wed Jan 28 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-23mdk
-- drakbackup: (stew)
-  o another cron issue reported on Anthill
-  o fix broken sys, other restore
-- drakconnect:
-  o new drakconnect wizard:
-    * remaining issues: isdn and zeroconf config, bewan modem, isapnp
-      cards, X11 behavior on name change
-    * provider database for modem and adsl connections
-    * renewed steps
-    * show device name rather than ethX
-    * modem:
-      + handle CHAP/PAP
-      + enable to use dynamic ip/dns/gateway
-    * adsl:
-      + update for eagle package replacing adiusb
-      + detect eci modems and explain why we cannot handle them
-  o manage part: update (poulpy)
-- draksound: fix unwriten sound aliases when configuring not yet
-  configured cards (#6988)
-- printerdrake: kill stupid userdrake dependancy (gc)
-- ugtk2 / interactive layers:
-  o make trees and lists take all availlable space
-  o pack/align checkboxes to left
-  o rework window sizing: size all windows and add a scrollbar for the
-    whole window if needed (not just around advanced settings) (pixel)
-- misc fixes for 2.6.x kernels (gc, pixel & planel)
-
-* Tue Jan 20 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-22mdk
-- drakboot: add a warning telling to run lilo after modifying
-  lilo.conf (#6924)
-- drakconnect: enhanced "manage" part (poulpy)
-- drakfirewall: add icmp support and "Echo request (ping)" choice
-  (pixel)
-- drakgw: transparent proxy support (florin)
-- more kernel 2.6.x support (pixel)
-- fix subdialogs when embedded (#6899)
-
-* Thu Jan 15 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-21mdk
-- prevent spurious top windows to appears when embedded in mcc
-
-* Thu Jan 15 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-20mdk
-- diskdrake:
-  o more lvm2 support (pixel / Luca Berra)
-  o update partition reread on kernel side and rebooting if needed (pixel)
-- drakboot:
-  o boot loader config: do not complain on canceling
-  o graphical boot theme config:
-    * handle grub too (bootsplash being independant of boot loader)
-    * fix layout when embedded
-- drakconnect: update manage interfaces (poulpy)
-- drakTermServ: first time wizard (stew)
-
-* Wed Jan 14 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-19mdk
-- diskdrake: updated lvm2 support (pixel)
-- drakboot: boot theme configuration is back (warly)
-- drakboot, drakclock, drakconnect, drakfloppy, drakfont, drakperm,
-  draksec: sanitize buttons bar
-- drakedm: fix dm list
-- printerdrake: sort printer models list
-
-* Mon Jan 12 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-18mdk
-- drakedm: when offering to restart dm, offer yes/no as choice rather
-  than ok/cancel (#6810)
-- drakdisk: sanitize buttons when working on mount points (smb,
-  webdav, ...)
-- drakfloppy: handle both kernel 2.4.x and 2.6.x (before size field
-  was not properly when switching between threes b/c we looked for
-  module.ko instead of module.o.gz and the like)
-- drakfont: renew GUI through subdialogs
-- localedrake: update languages list (pablo)
-- printerdrake: do not push anymore help menu at right
-
-* Mon Jan 12 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-17mdk
-- drakfirewall: allow a range of ports (anthill bug #267) (pixel)
-- drakfont:
-  o fix unstalling fonts
-  o sanitize application options, about, font import and font removeal
-    layouts
-- fix behavior when embedded in interactive layer:
-  o prevent subwindows being too small
-  o prevent subwindows breaking when canceled
-- run_program layer: don't print refs in log when output is redirected
-  (blino)
-- wizards layer: only complain if a problem actually happened
-- drakconnect:
-  o first snapshot of new manage wizard (poulpy)
-  o "delete network interface" wizard:
-    * show a finish button on last step
-    * exit once delete interface wizard has ended instead of then
-      running the std add wizard...
-    * list ppp interfaces too
-
-* Fri Jan  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-16mdk
-- support newer gtk2 bindings
-- fix drakboot --boot embedding
-- fix logdrake wizard when embedded
-
-* Fri Jan  9 2004 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-15mdk
-- alias scannerdrake => drakscanner
-- drakauth: integrate chkauth (which is now deprecated) (pixel)
-- drakbackup: (stew)
-  o DVD+RW support,
-  o fix bogus cron message
-- drakboot:
-  o split it into bootloader and autologin configuration
-  o drop no more handled keytable line in grub config file  (pixel)
-  o simplify lilo boot message. Not mentioning the timeout parameter
-    (#5429)  (pixel)
-  o remove /boot/grub/messages and don't use the i18n command which
-    are obsolete since grub doesn't handle it anymore (pixel)
-- drakconnect: fix sagem800 configuration (poulpy)
-- drakdisk: basic lvm2 support (pixel)
-- drakfloppy must not be in drakxtools-newt, must now require mkbootdisk
-  (which is not installed by default anymore)
-- drakperm: do not discard 0 when perms are 0xx like
-- drakTermServ: support new etherboot floppy image syntax and file
-  locations (stew)
-- drakxservices: fix descriptions (#1704) (pixel)
-- enable other packages to override libDrakx translations with those
-  from their own domains
-- handle /etc/modprobe.preload
-- harddrake: detect megaraid controllers as scsi ones
-- harddrake service:
-  o for removable devices, we've to remove/add them one by one, so
-    when several devices of the same class are removed/added, we ask
-    if we should handle them several time.
-  o let ask confirmation once per class instead (olivier blin, #6649)
-  o do no ask several times the kernel to switch into verbose mode
-    (olivier blin)
-  o really display which devices were removed
-- misc cleanups
-- tool layout:
-  o add a separator below buttons
-  o really pack the two button sets at edges
-  o try to have a better layout when embedded: let's have only one
-    scrollbar that scroll the whole window
-
-* Tue Dec 30 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 9.3-14mdk
-- ugtk2.pm: fix ask_dir dialog (#6152)
-
-* Mon Dec 22 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-13mdk
-- do not show useless "ignore" button when requesting root password
-  through kdesu
-- drakperm: keep changes when switching view moed
-- drakclock:
-  o prevent one to open zillions of sub dialogs
-  o reuse std dialogs
-  o remove stock icons
-- fix buttons layouts and text wrapping in in drakboot, drakfloppy and
-  drakperm
-- logdrake's mail alert wizard: 
-  o properly handle faillure
-  o accept local user names as well as emails
-- printerdrake, harddrake2: push help menu at right
-- scannerdrake: (till)
-  o add upload firmware feature 
-  o configure non-root access to parallel port scanners automatically.
-
-* Tue Dec  9 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-12mdk
-- net_monitor:
-  o properly handle multiple interfaces (each one having its own pixmap)
-  o make it fit when embedded
-  o kill icons on button
-  o kill profile managment (duplicated features already availlable
-    within mcc)
-- drakconnect:
-  o split in multiples pieces
-  o move profile support into mcc
-  o fix writing spurious "WIRELESS_NWID=HASH(0x8e93758)" in ifcfg-<intf>
-  o add "delete an interface" wizard
-- draksound: handle new snd-bt87x driver 
-
-* Fri Nov 28 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-11mdk
-- improve buttons layout in interactive written tools
-- drakconnect:
-  o fix sagem configuration
-  o do not silently ignore internal errors
-- drakgw:
-  o make --testing somewhat more useful
-  o log more explanations
-  o really support embedding
-- wizards: do not show up anymore banners when embeeded
-
-* Tue Nov 25 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-10mdk
-- detect serial MGE ups
-- drakconnect:
-  o fix #5664: list ppp0 for modem and adsl connections too and ippp0
-    too for isdn ones
-  o fix #6184: read back "Connection Name" and "Domain Name" fields
-    when configuring modem
-  o fix adsl configuration steps that were hidden
-  o configure all isdn cards, not only the first one
-  o fix "kid exited -1" warnings
-  o handle zaurus connected through USB cables resulting in usbnet
-    driver creating usbX interfaces
-- mousedrake: default to "PS/2|Automatic" for ps/2 mice (automagically
-  use IMPS/2 when needed)
-- XFdrake: misc fixes
-
-* Wed Nov 19 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-9mdk
-- resync serial_probe with kudzu
-- fix some untranslated strings
-
-* Mon Nov 17 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-8mdk
-- rebuild for reupload
-
-* Sat Nov 15 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-7mdk
-- fix links
-
-* Fri Nov 14 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-6mdk
-- drakconnect: fix speedtouch start/stop scripts when firmware is
-  already there or when firmware installation is canceled
-- harddrake2: do not show module if unknow for system bridges since
-  it's normal
-- harddrake service: remove net aliases if needed
-- move clock.pl from mcc into drakxtools package
-- provide drakclock, drakdisk, drakhardware, drakkeyboard, draklocale,
-  draklog, drakmouse, draknet_monitor, drakprinter, drakx11 new names
-- XFdrake: choose a not-to-bad default when X auto config fails in
-  auto install
-
-* Sat Nov  8 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-5mdk
-- drakconnect:
-  o fix lan always marked as detected even when no detection was performed or
-    when there's no ethernet devices
-  o list acx100_pci as a wireless network cards driver so that one can
-    set wireless parameters for it (#6312)
-- harddrake2: 
-  o do not display "unknown module" in red for modems known to not
-    need any module (#3047)
-  o enumerate cpus from 1 instead of 0 (#4704)
-  o typo fix #6134: (JAZ drives are nothing to do with jazz music)
-
-* Fri Nov  7 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-4mdk
-- drakconnect:
-  o mcc view: fix network interfaces list update (really remove from
-    the Gtk+ list lost interfaces)
-  o prevent droping wireless parameters for modules not listed in
-    wireless modules list
-  o more usb wireless detection fix
-
-* Thu Nov  6 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-3mdk
-- drakconnect:
-  o fix wireless cards detection (#3690, #4181, #5143, #5814, ...)
-  o always list sagem_dhcp in list, showing it only in expert mode is
-    confusing
-- drakconnect/localedrake: fix a few unstranslated strings
-
-* Wed Nov  5 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-2mdk
-- drakbackup: enable bz2 compression option (stew)
-- drakconnect: detect again unconfigured network interfaces
-
-* Tue Nov  4 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.3-1mdk
-- overall misc cleanups
-- diskdrake: check both nfs servers version 2 and version 3, and
-  remove duplicates (bug #6055) (pixel)
-- drakconnect:
-  o fix going back in some places (isdn, ...)
-  o fix #6159: fix detection when a local name server is faking the
-    connection because of its cache by checking at least a packet is
-    ack-ed
-  o translate a few strings (part of #5670)
-  o handle more than 4 ethernet cards
-- drakconnect, drakfirewall, drakgw: show up a combo box with detected
-  network interfaces (but still let the user manually type it sg like
-  ppp0 if needed) instead of letting the user guessing the network
-  interface
-- drakfont: support getting fonts from samba (Salane KIng)
-- harddrake:
-  o show isdn & adsl adapters too (adsl adapters were previously
-    classed as modems)
-  o use drakconnect to configure modems
-- drakfirewall: translate services names
-- "mail alert" wizard from logdrake:
-  o save options into /etc/sysconfig/mail_alert instead of hardcoding
-    them in the cron task and restore them when configuring it again
-  o ensure services are always listed in the same order
-  o send the mail only if there's really sg to warn about (aka do not
-    sent empty mails)
-  o generate perl_checker compliant cron tasks
-- translations: updates, breakages
-
-* Tue Nov  4 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-19mdk
-- drakboot: disable lun detections for ide burners
-- drakconnect:
-  o fix empty fields in expert mode
-  o fix anthill bug #50: ensure /etc/ppp/pap-secrets is not world
-    readable since it contains password/user mapping for dialup
-- net_monitor: handle multiple network interfaces
-
-* Mon Oct 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-18mdk
-- drakconnect:
-  o do not blacklist anymore bcm4400 for network hotplugging
-  o support ISDN usb adapters
-- drakperm:
-  o force user|group|other rights order in edit dialog
-  o one was able to alter system rules in memory wheareas this is not
-    supported since they're enforced by msec.
-    disable "ok" button for system rules to prevent confusion.
-- harddrake service: workaround anthill bug #18 (do not overwrite sound
-  aliases when no hardware change occured)
-- misc amd64 fixes (gwenole)
-- net_monitor:
-  o fix connection status detection
-  o fix profile managment switch
-
-* Thu Oct 16 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-17mdk
-- drakbackup: all users overrides individual selection in wizard
-  (#5916) (stew)
-- drakconnect:
-  o fix #425, #1881: wireless adapters settings were lost when
-    altering network configuration when not from wizard mode
-  o when steping back in wizard, do not overwrite first card
-    parameters with last one's (#3276)
-  o fix expert mode (lost checkboxes states when "expert mode" option
-    is checked)
-  o blacklist bcm4400 for network hotplugging
-- drakfont:
-  o fix ttf conversion (#5088)
-  o log more explanations
-- draksec: fix unsaved security administrator setting (#6103)
-- misc chinese fixes (arnaud, pablo)
-- printerdrake: fix lpd call (pablo)
-- translations updates (pablo)
-- misc amd64 fixes (gwenole)
-
-* Fri Sep 19 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-16mdk
-- drakconnect: fix #5825 (hostname set as ARRAY(0x...))
-
-* Thu Sep 18 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-15mdk
-- drakboot: (pixel)
-  o fix switching from grub to lilo
-  o fix drakboot crashing once bootloader has been altered in text
-    mode
-- printerdrake: further fix cups configuration (till)
-- update translations
-
-* Wed Sep 17 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-14mdk
-- printerdrake: fix cups configuration regarding commented out rules
-
-* Wed Sep 17 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-13mdk
-- diskdrake: (pixel)
-  o fix writting wrong types in fstab
-  o fix handling of mount points with underscoresb (#5728)
-  o do not check current partition for already used mount point
-- drakauth : fix NIS managment (#5668) (pixel)
-- drakhelp: load online drakbug help (daouda)
-- draksound: (#5403)
-  o make sure to use OptionMenu instead of Combo boxes
-  o move help into a tooltip
-- upate translations
-
-* Tue Sep 16 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-12mdk
-- diskdrake: (pixel)
-  o fix growing ext2/ext3 partitions
-  o handle beos partitions with filesystem befs (#5523)
-- drakbackup:
-  o use hd as default daemon media (stew)
-  o fix translation issues (Arpad Biro)
-  o fix user cron misbehavior (Keld J�rn Simonsen)
-- drakTermServ:
-  o fix translation issues (Arpad Biro)
-  o fix help text format (stew)
-- drakboot: when "Back" is pressed, restore the list of entries in
-  bootloader (#5680) (pixel)
-- drakbug: add support for bug submission about stable releases into
-  anthill (stew)
-- drakconnect: (poulpy)
-  o fix adsl support regarding ppoe.conf (#5674)
-  o fix speedtouch (#5056)
-- draksound:
-  o do not overwrite current driver if it's a viable driver for the
-    current sound card (#5488)
-  o show the current driver too (being preselected) so that users do
-    not get confused
-- drakupdate_fstab: fix supermount handling (pixel)
-- fix hidden or cutted buttons (#1919, #2364, #2705, #3667, ...)
-- fix expert mode resulting in advanced setting being displayed by
-  default but label still being "advanced" instead of "basic" (#4353)
-- harddrake service: switch to verbose mode when using bootsplash
-  (warly)
-- localedrake: fix chinese input (#4408)
-- printerdrake: (till)
-  o fix LIDIL devices management
-  o really handle PSC 1xxx and OfficeJet 4xxx
-  o added support for user-mode-only HPOJ devices (HP PSC 1xxx and
-    OfficeJet 4xxx) (#5641)
-- standalone tools: speedup startup by invoking "rpm -qa" only once (fpons)
-- XFdrake:
-  o use 24bit for fglrx in automatic mode (fpons)
-  o prevent lost Xauth access (pixel)
-  o fix logout from gnome (pixel)
-  o fix not translated test page (pixel)
-
-* Thu Sep 11 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-11mdk
-- drakboot: misc fixes (pixel, fpons)
-- drakconnect:
-  o do not set hostname if there's a dynamic interface
-  o fix firmware loading (poulpy)
-  o fix profiles with spaces in name (#5586)
-- drakfont: fix faillure to install fonts (#5571)
-- drakfirewall: make it work with dialup connexion (#4424) (florin)
-- drakgw: fix canceling info steps (florin)
-- harddrake2:
-  o fix freeze while configuring modules (infamous #4136)
-  o warn about no module parameters instead of not showing the dialog
-- localedrake: configure kdmrc too (pixel)
-- logdrake: always display the log domain names in the same order
-- printerdrake: help making printerdrake icon bar be shorter (#5282)
-- update wizard banners (davod beidebs)
-- XFdrake: handle ati drivers (nplanel, fpons)
-
-* Tue Sep  9 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-10mdk
-- disdrake: fix userdrake not runnable (#5447) (pixel)
-- drakboot:
-  o fix too small kernels window width (#5040)
-  o fix too big main window
-- drakconnect:
-  o when no profile is set, use default one (poulpy)
-  o add support for sagem dhcp (francois)
-- drakperm: do not complain about saving on view change
-- drakxtv: install xawtv if needed (#5130)
-- logdrake: fix infinite entries (#5448)
-- printerdrake: fix options saving (#5423) (till)
-
-* Mon Sep  8 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-9mdk
-- drakfont: fix not being able to select directories (#4964)
-- drakconnect:
-  o fix profiles managment (poulpy & tv)
-  o fix firmware loading (#5307, poulpy)
-- fix net_monitor not working as root
-- printerdrake:
-  o use new help scheme (daouda)
-  o reread database when switching between normal and expert mode
-    (till)
-- scannerdrake: complain if saned could not be installed
-- XFdrake: use OptionMenu's rather than Combo's (more consistent gui
-  and better behavior when embedded)
-
-* Sun Sep  7 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-8mdk
-- localedrake: configuration fixes (gc)
-- drakgw: fix #2120 & #2405 (florin)
-- drakconnect: (poulpy)
-  o workaround messed up ppp0 configration
-  o fix profiles
-
-* Thu Sep  4 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-7mdk
-- diskdrake: fix #5204 (pixel)
-- drakbackup: fix untranslatable strings, ... (stew)
-- drakconnect:
-  o fix #5242: loop on winmodem connection if no windomem but winmodem
-    is selected
-  o offer to select modem device
-- fix buildrequires for 64bits ports
-- fix lsnetdrake on AMD64 (gwenole)
-
-* Sun Aug 31 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-6mdk
- - drakboot: default parameters are those of the default target (pixel)
- - drakedm: in non expert mode, only display the list of *installed* display
-   managers
- - drakfloppy, drakconnect: fix more dialogs height
- - fix requires
-
-* Thu Aug 28 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-5mdk
-- drakhelp: add support for contextual help (daouda)
-- explanations are back (pixel)
-- fix autologin for xdm (pixel)
-- drakconnect:
-  o fix dialogs height
-  o fix #4372 (poulpy)
-  o profiles are back
-- printerdrake: new GUI (till)
-
-* Wed Aug 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-4mdk
-- drakconnect:
-  o non wizard gui
-    * fix hostname setting
-    * set hostname at the same time we apply dns changes (on apply
-      button press)
-  o both wizard and non wizard modes: (poulpy)
-    * fix #4363
-    * fix speedtouch firmware file name
-- drakxtv: resync with kernel's bttv
-- printerdrake: misc fixes (till)
-
-* Tue Aug 26 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-3mdk
-- drakconnect (non wizard gui):
-  o add --skip-wizard option to get into non wizard mode
-  o hide profile in "internet config" dialog if profiles are disabled
-  o "Configure hostname..." button: offer to configure DNS too
-  o only allow to run one wizard at once
-  o reload the configuration once the wizard exited
-  o prevent one to do concurrent config changes from the gui while the
-    wizard is run
-  o only write conf & install packages on exit if something really has
-    been altered so that we do not write the config twice if the
-    "apply" button was already pressed
-
-* Tue Aug 26 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-2mdk
-- diskdrake: (pixel)
-  o fix WebDAV configuration embedding (#4703)
-  o use fs=ext2:vfat or fs=udf:iso9600 for supermount-ng
-- printerdrake: misc fixes (till)
-- service_harddrake: prevent depmod to be runned everytime
-- XFdrake: more fixes for multilayout keyboards
-
-* Mon Aug 25 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-1mdk
-- drakfloppy: make it CJK aware
-- drakTermServ: add /etc/modules for local hardware config (stew)
-- fix #4579: drakconnect not working on console (poulpy)
-- printerdrake: misc fixes (till)
-
-* Sat Aug 23 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.35mdk
-- drakperm:
-  o add new rules at top
-  o always display editable rules before non editable ones
-  o disable up button when selected rule is the first one
-  o disable down button when selected rule is the latest one or when
-    next rule is non editable
-  o fix moving up/down rules
-  o fix no saving if we've sort rules
-
-* Sat Aug 23 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.34mdk
-- disdrake: explain why ntfs resizing had failled (pixel)
-- drakbackup: (stew)
-  o fix crash on file select of "Other" finish custom cron
-    configuration
-  o normal users can now do cron backups
-- drakconnect:
-  o fix no detection in expert mode
-  o better firmware load from floppy managment (poulpy)
-  o fix pppoa use for speedtouch USB (poulpy)
-- drakfirewall: add samba in services list
-- drakperm: make security level menu be more understandable & usuable
-- draksec: translate default value in help tooltips too
-- fix CJK wrapping in more places (#3670 and the like)
-- make interactive button order be the same as gtk dialogs one and our
-  dialogs but only in standalone mode
-- misc fixes from pixel
-
-* Thu Aug 21 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.33mdk
-- fix CJK wrapping in interactive tools (#4642)
-- remove ugly border around standalone tools
-- wizards: increase height to prevent some hidden or cutted buttons
-- diskdrake: fix small unallocated area at the end of the drive
-  (pixel)
-- drakconnect: (poulpy)
-  o allow user to copy firmware from a floppy
-  o fix another back step
-  o fix wrong url
-- drakxtv: only offer to configure xawtv if bttv was configured
-- XFdrake: fix #3976 (francois)
-- update keyboards list & translations (pablo)
-
-* Tue Aug 19 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.32mdk
-- pci hardware discovery: do full-probe by default
-- show advanced options by default if --expert was passed or if expect
-  checkbox was checked (#4353)
-- drakconnect: fix internet reconnection (poulpy)
-
-* Tue Aug 19 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.31mdk
-- drakbackup: user definable crontab entry (stew)
-
-- drakconnect:
-  o fix up/down interface detection (poulpy)
-  o fix some more previous buttons in drakconnect wizard mode
-  o fix crash on interface enabling/disabling
-  o fix lan changes (#4088)
-
-- drakfloppy:
-  o fix long-standing broken mkbootdisk call bug
-  o sort modules and directories in treeview
-  o save the options & modules list on exit and them restore it on
-    load
-  o try to be more user friendly:
-    * if no error, display a success message, then exit
-    * on error, instead of displaying the raw exit code that has no
-      meaning for the end user, display in red the log message of mkbootdisk
-    * remove insane expert button and so called expert frame
-
-- drakpxe: match new pxe dhcp.conf configuration file (francois)
-
-- harddrake2:
-  o display the right fields description when no device is selected
-  o make dialogs be modals and transcient
-
-- diskdrake: (pixel)
-  o fix lvm managment(#4239)
-  o fix underscores being underlines (#4678)
-  o fix interaction with mcc
-
-- fix misc issues with shadow passwords and package managment
-  (francois/pixel)
-* Sun Aug 17 2003 Damien Chaumette <dchaumette@mandrakesoft.com> 9.2-0.30mdk
-
-- drakconnect mcc: 
-  - allow hostname change
-  - dhcp to static fixes
-
-* Tue Aug 12 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 9.2-0.29mdk
-- drakconnect: fix message (#4564)
-- drakbackup: (stew)
-  o fix #4381
-  o search for files to restore
-  o fix looping in catalog restore
-  o gui enhancements (fabrice facorat)
-  o deal with users that are deleted from the system (#4541)
-- drakxtools depends on gurpmi
-- lot of misc bug fixes
-
-* Thu Aug  7 2003 Pixel <pixel@mandrakesoft.com> 9.2-0.28mdk
-- drakxservices: xinetd services have a special treatment
-- localedrake: fix the "zh_TW with country China" case
-- no more stock icons 
-
-* Mon Aug  4 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 9.2-0.27mdk
-- ugtk2.pm:
-  - revert "use checkboxes instead of icons"
-  - fix not possible to select with mouse anymore (rpmdrake etc)
-
-* Mon Aug  4 2003 Pixel <pixel@mandrakesoft.com> 9.2-0.26mdk
-- various fixes
-- clean tarball with no Makefile_c (thanks to Christiaan Welvaart)
-
-* Sat Aug  2 2003 Pixel <pixel@mandrakesoft.com> 9.2-0.25mdk
-- drakauth first appearance
-- diskdrake --nfs and --smb:
-  o instead of removing the "Search servers" button when the search is over,
-    keep it to allow searching for new servers
-    (the label is changed from "Search servers" to "Search new servers") (bug #4297)
-- XFdrake
-  o use something like """Virtual 1280 960""" instead of """Modes "1280x960" "1024x768" "800x600" "640x480""""
-  o fix test dialog box
-- drakbackup (various changes)
-- drakboot
-  o allow to choose /dev/fd0 for the boot device
-  
-* Thu Jul 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.24mdk
-- drakbug:
-  o use option menus instead of combos
-  o use std button layout
-- drakconnect:
-  o double click on ethernet interface list lines run lan config
-    dialog
-  o remove nonsense expert button
-- drakperm: fix crash on adding new permission
-- harddrake: fix #4258
-- mousedrake: use std button layout
-- ugtk2:
-  o add infrastucture for rpmlint toggle (semi-selected state mis-functionnal)
-  o restore mouse selection
-
-* Thu Jul 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.23mdk
-- drakperm:
-  o main window:
-    * "ok" button should exit after having saved the preferences
-    * localize levels in option menu
-  o preferences dialog :
-    * fix preferences saving on  exit
-    * fix tips
-- draksec:
-  o restore help for msec checks
-  o enhanced help in tooltips
-
-* Thu Jul 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.22mdk
-- drakautoinst, drakper, draksound, and many other tools: use option
-  menus instead of combo boxes when the user is selecting from a fixed
-  set of options
-- drakboot: hide non working splash stuff
-- drakperm:
-  o sanitize gui (upcased labels, understandable labels, ...)
-  o settings dialog:
-    * localize all fields
-    * add tips for all check boxes
-    * use std button layout
-    * use stock icons
-  o rules toolbar: use stock icons
-- net_monitor: fix crash on profile change due to netconnect api
-  change
-
-* Wed Jul 23 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.21mdk
-- drakbackup: misc fixes (stew)
-- drakboot: directly configure gdm & kdm
-- drakconnect: fix #4050
-- drakfont: fix #1679 & #3673
-- drakgw:
-  o fix not being able to step backward
-  o fix canceling resulting in broken dhcp config
-  o make --testing option being usefull
-- drakhelp: fix no help for de/it/ru locales (daouda)
-
-* Tue Jul 22 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.20mdk
-- drakconnect: fix "lan config" dialog where fields were not filled
-- draksec: vertically align OptionMenus
-
-* Mon Jul 21 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.19mdk
-- diskdrake, drakconnect: add an help button in standalone mode
-- draksec
-  o describe all security levels
-  o make it clear that security admin is not a security level
-  o colorize security levels names
-  o do not offer to set syadmin when reports are disabled
-  o fix infamous "when embedded draksec can be enlarged but never shrink back"
-  o make 1st tab title somewhat clearer
-- harddrake2: workaround buggy gtk+-2.x that do not enable wrapping textviews when
-  realized
-- renew drakconnect wizard gui (2/x):
-  o make previous button always be availlable when configuring lan
-  o keep user changes when going back to main connection types menu
-  o do not loop if one refuse to save changes, just skip the save step
-  o fix final success message
-  o really translate type connection to be translated
-  o try to get more space on screen
-  o dhcp host name cannot be set if one want to get it from dhcp server
-
-* Sat Jul 19 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.18mdk
-- draksec:
-  o sort functions & checks when writing configuration
-  o really fix config load
-
-* Fri Jul 18 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.17mdk
-- draksec:
-  o fix preferences loading & saving
-  o sort again functions & checks
-
-* Thu Jul 17 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.16mdk
-- do not exit the whole application when one destroy a dialog
-- drop gtk+1 requires
-- renew drakconnect gui (1/x):
-  o embedded mode:
-    * remove ugly icon
-    * fix internet gateway buttons layout
-    * smaller dialogs
-    * correctly align fields in "lan configuration" dialog
-    * run wizard in background (no more main window freeze until
-      wizard exit)
-  o wizard mode:
-    * proxy configuration step: do not go back two steps back on
-      "previous" click, but only one back
-    * properly use checkboxes (do not put extra labels before when
-      checkbox's label is empty)
-- wizard mode:
-  o stock items in wizards for previous/next
-  o do not force permanent center of wizard windows, which is not
-    user-friendly
-  o always use s/TextView/Label/ 
-
-* Tue Jul 15 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.15mdk
-- drakbackup, drakperm: fix button layout
-- drakboot, drakfloppy: use option menus rather than non editable
-  combo
-- drakboot:
-  o grey theme config instead of hiding it
-  o describe user and desktop lists
-- drakfloppy: grey remove button if no module to remove in modules
-  list
-- draksec: wrap labels
-- fix interactive apps on X11 (eg diskdrake)
-- fix error and warning dialogs
-- logdrake: ensure we got a valied email in "email alert"
-- printerdrake: make printerdrake runable
-- xfdrake: make it use stock items too
-
-* Mon Jul 14 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.14mdk
-- drakboot: fix /etc/lilo.conf generation when reading grub config by setting
-  valid "boot=" parameter
-- drakconnect, drakfloppy: make checkboxes out of ugly "expert <-> normal modes"
-  buttons (saner gui)
-- drakconnect:
-  o kill duplicated code, share it with drakfloppy and others
-  o renew GUI:
-    * make sub windows be modal, centered on parent and trancient dialogs
-      instead of toplevel windows
-    * fix "Internet connection configuration" dialog
-    * fix layout of main window:
-      + pack together expert mode toggle and wizard button
-      + merge wizard label and button
-- drakfloppy:
-  o fix warning on menu building
-  o fix module browsing after gtk2-perl-xs switch
-  o support new 2.5.x kernels' kbuild
-  o fix old brown paper bug (mdk8.2/9.0 :-() not passing extra selected modules
-    to mkinitrd
-  o fix unable to pick a module again after having removed it from selection
-  o renew GUI:
-    * window with enabled expert options is too big when embedded: let's move
-      expert options into a sub dialog
-    * use stock dialogs
-- draksec:
-  o translate msec options' default values
-  o display descriptions rather than raw function names
-- drakTermserv: fix entry filling
-- logdrake: fix crash when called from net_monitor
-- net_monitor: switch from gtk+-1.2.x to gtk+-2.2.x (fix #3998 btw)
-- sanitize guis, especially button layouts:
-  o use std layout (ButtonBoxes) for buttons everywhere
-  o use stock items everywhere
-  o let interactive apps using stock items on x11 and old drak translated items
-    in other backends
-  o pack buttons always in the same order and places
-  o use OptionMenu instead of Combo Boxes when the user is selecting from a
-    fixed set of options
-
-* Thu Jul 10 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.13mdk
-- drakfloppy: one cannot edit output buffer
-- drakperm: fix crash when moving lines around sorted columns
-- draksec: more stock icons
-- logdrake: fixes
-
-* Thu Jul 10 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.12mdk
-- drakboot, drakfont: use stock button
-- drakconnect, drakfloppy: grey widgest instead of hiding them when
-  not in expert mode
-- drakconnect, draksec: fix crash
-- drakbackup: misc fixes (stew)
-
-* Wed Jul  9 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.11mdk
-- more work on new perl binding for gtk+-2, especially for drakbug and
-  rpmdrake
-
-* Wed Jul  9 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.10mdk
-- switch from gtk2-perl to gtk2-perl-xs
-- a few more stock items
-
-* Sun Jul  6 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.9mdk
-- increase gui coherency of drakxtools vs other gtk+ apps: use stock icons
-- drakbackup: (stew)
-  o show units for hard-drive allocation
-  o add "View Configuration" 1st screen.
-  o honor user defined limits for backup disk consumption
-  o log last backup and to enable view last backup log
-  o fix gui crash on restore. (Keld Jorn Simonsen/Cooker list)
-- drakconnect, drakfloppy, drakperm: let columns be sortable
-- drakconnect (isdn): virtual interface ippp0 is started at boot
-  (dam's)
-- harddrake2: colorize help
-- keyboard managment: added various new keyboard layouts (pablo)
-
-* Tue Jul  1 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.8mdk
-- drakbackup: try to better fit gui when embedded (fix #4111) (stew)
-- drakTermServ: enable local client hardware configuration (stew)
-- harddrake2: let gui behave better when embedded
-- ugtk2: locales setting fix for rpmdrake (gc)
-
-* Tue Jun 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.7mdk
-- drakboot: more work on grub conf reread
-- drakedm: fix crash on service restart
-- drakfont: fix crash when trying to remove empty font list (#1944)
-
-* Tue Jun 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.6mdk
-- autoinstall: (pixel)
-  o fix regarding LVMs
-  o support encrypted partitions
-- draconnect: misc fixes (poulpy)
-- drakboot: reread grub config file if grub is the current boot loader
-  (#3965)
-- diskdrake: fix for nfs mount points (pixel)
-- drakgw: reread current network conf (florin) (#468)
-- i18n fixes (#3647 and co)
-- mousedrake: add mouse test in non-embedded mode (#2049) (gc)
-
-* Tue May 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.5mdk
-- keyboardrake: resync with XFree86-4.3 (pablo)
-
-* Tue May 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.4mdk
-- drakconnect: fix #3628 (ensure 644 perms on /etc/resolv.conf)
-
-* Wed May 21 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.3mdk
-- drakbackup: fixes regarding file names in differntial mode (stew)
-- drakboot, drakconnect, harddrake2, printerdrake: misc cleaning
-- drakconnect:
-  o workaround #3341 (display "Bad ip" instead of a blank field if we
-    failled to parse the ip)
-  o fix #853 (check ip) (poulpy)
-- printerdrake: fix #1342 (english rephrasing)
-- requires: fix #3485
-
-* Tue May 20 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.2mdk
-- printerdrake: misc bug fixes
-- drakconnect: fix #763, #2336 (ethX aliases on network card changes)
-  (poulpy)
-
-* Tue May 20 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.2-0.1mdk
-- drakconnect: fix #2530 (extraneous vindow on wizard error) (poulpy)
-- drakedm: fix #1743 (offer to restart the dm service)
-- drakfont: fix #3960 (divide by zero execption)
-- draksec: fix #3616 (draksec discarding changes)
-- my_gtk: fix #3952 (non working drakcronat)
-
-* Fri May 16 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-38mdk
-- drakboot:
-  o do not install both lilo and grub when grub is choosen
-  o further fix #2826: replace spaces by underscores in labels
-  o further fix #3560: update main bootloader label after the
-    bootloader switch
-  o raise a wait message window so that the user can figure out what
-    occurs (lilo installation being quite long)
-- harddrake: localize drive capabilites (aka burning, dvd managment, ...)
-- drakconnect: fix #852: add a step to warn user before writing
-  settings (poulpy)
-
-* Thu May 15 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-37mdk
-- drakfont: fix #1352 (do not add font directory with dummy messages)
-- harddrake2: fix #3487 (invalid charset in help windows)
-- drakconnect: fix "isdn modem choice step is skipped" bug (poulpy)
-
-* Mon May 12 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-36mdk
-- drakboot:
-  o do not loop on console (part of #3560) (pixel)
-  o do not log localized messages
-  o if the bootsplash is missing, just go back to main config window
-
-* Wed Apr 30 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-35mdk
-- draksec: fix #3618 (let one pick any security level)
-- harddrake service: display all removed devices
-
-* Tue Apr 29 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-34mdk
-- drakedm: fix #3701 (return back to the display managers menu if one
-  cancel the installation of the required packages)
-- drakfont: empty the font queue when step back (poulpy)
-
-* Thu Apr 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-33mdk
-- fix provides
-
-* Wed Apr 23 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-32mdk
-- translation snapshot
-
-* Mon Apr  7 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-31mdk
-- harddrake gui: fix menu entry description
-- drakbtoot: fix #2826 (aka crash when one enter space in lilo label)
-- ugtk2: fix #3633
-- drakconnect:
-  o fix #1675: swap the text and button widgets
-  o typo fix (dam's)
-- new perl_checker compliance (pixel)
-- xfdrake: better keyboard managment (pixel)
-- update translations (pablo)
-- build fix for 64bits arch (gwenole)
-
-* Fri Apr  4 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-30mdk
-- fix drakfloppy crash on boot floppy creation
-- ugtk2.pm: fix slight pb with gtktext_insert (#3633) (gc)
-
-* Fri Mar 28 2003 Pixel <pixel@mandrakesoft.com> 9.1-29mdk
-- use ServerFlags DontVTSwitch for i845, i865 and i85x
-
-* Mon Mar 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-28mdk
-- drakconnect: add support for ltpmodem
-
-* Fri Mar 21 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-27mdk
-- harddrake service: increase default timeout from 5 to 25 seconds
-
-* Sun Mar 16 2003 Warly <warly@mandrakesoft.com> 9.1-26mdk
-- do a correct cvs up of all gi before (me sux)
-
-* Sat Mar 15 2003 Warly <warly@mandrakesoft.com> 9.1-25mdk
-- fix drakperm fatal error in editable mode
-
-* Fri Mar 14 2003 Pixel <pixel@mandrakesoft.com> 9.1-24mdk
-- fix XFdrake handling NVidia proprietary drivers
-
-* Thu Mar 13 2003 Till Kamppeter <till@mandrakesoft.com> 9.1-23mdk
-- printerdrake: Fixed bug #417: '$' character in printer URI was not
-  correctly handled.
-- Desktop group simplification (francois).
-- Translation updates (pablo, fabian).
-
-* Thu Mar 13 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-22mdk
-- drakboot/drakx: fix #3161 (ensure right permissions on
-  /etc/sysconfig/autologin for bad root umask case)
-- enable smooth sound configuration update from mdk9.0 (new unified
-  via sound driver) and from mdk8.x
-- scannerdrake detection fixes (till)
-- drakTermServ: Fix IP pool range (stew)
-
-* Wed Mar 12 2003 Pixel <pixel@mandrakesoft.com> 9.1-21mdk
-- diskdrake: have a default mount point for newly added removables
-- drakupdate_fstab: allow --del to remove fd0 & fd1
-
-* Wed Mar 12 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-20mdk
-- drakedm: install dm if needed
-- harddrake service: handle multiple remvable devices in the same hw
-  class (eg: 2+ cd burners or 2+ dvd drives or 2 floppies, ...)
-- drakgw: really use the chosen net_connect interface (florin)
-- drakbackup: gtk2 port fixes (stew)
-- drakboot: fix #3048 (pixel)
-
-* Tue Mar 11 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-19mdk
-- ugtk2: fix still seldom happening #1445 (clicking two times too
-  fast) (gc)
-- drakxservices: fix embedding and packing in standalone mode (tv)
-- localedrake: add menu entry (fix #1461) (tv)
-- draksec: fix wait messages displaying (label was not displayed) in
-  both standalone and embedded modes (tv)
-- printerdrake fixes (till)
-- translation updates
-
-* Fri Mar  7 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 9.1-18mdk
-- ugtk2.pm: fix rpmdrake dumping core when multiple searchs in some
-  sorting modes (#2899)
-- network/adsl.pm: one small logical fix (fpons)
-
-* Thu Mar  6 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-17mdk
-- draksplash:
-  o fix #1766
-  o do not crash when browsing (#1947)
-  o do not crash on color selection
-- avoid virtual ethX to be reconfigured by drakconnect (francois)
-
-* Thu Mar  6 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-16mdk
-- draksound: fix #1929
-- moved code of XFdrake NVIDIA support to generic in standalone. (francois)
-
-* Thu Mar  6 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-15mdk
-- fix infamous #2672
-- let draksec fit in 800x600
-- harddrake: fix detection of mod_quickcam's webcams
-- scannerdrake: do not detect mod_quickcam's webcams as scanners
-- logdrake:
-  o do not update the text buffer when filling it
-  o show the wait message also when searching while embedded (else the
-    user will be confused and will wonder why logdrake is freezed
-- fix drakwizard ("next" button being packed too far) (pixel)
-
-* Wed Mar  5 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 9.1-14mdk
-- localedrake: fix behaviour when only one lang is available (clicking
-  on "cancel" on the country selection didn't cancel it)
-- drakconnect: fixes in isdn configuration (flepied)
-- drakperm (tv):
-  o fix #1776
-  o fix small memory leak (tree iterators)
-  o restore edit dialog on doble click
-- logdrake: restore "pre gtk+-2 port" search  behavior (tv)
-  o empty log buffer on search startup
-  o freeze buffer while searching
-  o scroll down the log buffer on filling
-- localedrake: don't categorize langs, for better looking (since
-  most people will have very few of them) (gc)
-- fixed wizard mode not taken into account for drakconnect in
-  drakconf. (francois)
-- fixed expert mode in drakconnect for dhcp for cleaning
-  variables. (francois)
-- fixed not to use invalid ethX. (francois)
-
-* Mon Mar  3 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-13mdk
-- drakboot: fix #2091, #2480
-
-* Mon Mar  3 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-12mdk
-- drakperm: fix rules saving
-- printerdrake: various fixes (till)
-
-* Fri Feb 28 2003 Guillaume Cottenceau <gc@mandrakesoft.com> 9.1-11mdk
-- drakconnect is no more supporting profiles. (francois)
-- drakconnect support for sagem Fast 800 used by free.fr (francois)
-- drakconnect support for ltmodem. (francois)
- 
-* Thu Feb 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-10mdk
-- harddrake service: 
-  o offer to configure cdrom/dvd/burners/floppies/
-    and the like mount points
-  o configure firewire controllers
-- diskdrake fixes (pixel)
-- drakconnect fixes (francois)
-
-* Thu Feb 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-9mdk
-- drakconnect: 
-  o fix lan configuration window filling
-  o fix net configuration window sizing
-- drakperm: make it fit better in both embedded and non embedded modes
-- drakgw: fix embedding
-- logdrake: fix scrolling for embedded explanations
-- mousedrake: fix embedding  (gc)
-
-* Thu Feb 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-8mdk
-- drakfloppy gtk+2 port
-- drakboot:
-  o cleanups
-  o disable autologin settings when autologin is disabled
-  o make embedded app look better
-- harddrake2: 
-  o fix #1858 (usb adsl speed touch modem misdetection)
-  o provides "options" and "help" pull down menu when embedded
-  o detect firewire controllers
-- drakedm: strip empty lines
-- lot of network fixes (francois)
-- drakbackup gtk+2 port fixes: #1753, #1754, #1933, #2159 (stew)
-
-* Tue Feb 25 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-7mdk
-- drakfloppy: 
-  o fix #1761
-  o only list physically present floppies
-- harddrake gui:
-  o better support for zip devices
-  o removable devices cleanups
-  o display dvd/burning capacities
-- harddrake service:
-  o do not flash the screen if nothing has to be configured
-  o removable devices cleanups
-- fix #1802 (pixel)
-
-* Mon Feb 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-6mdk
-- fix logdrake's mail alerts (services alert, don't crash)
-- drakperm: fix #1771, non editable combo1
-- drakfloppy: fix #1760
-- drakxservices: fix #502
-
-* Mon Feb 24 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-5mdk
-- clean up tools embeddeding in the mcc
-  o make it hard to freeze the mcc
-  o make tools loo better when embedded (no embedded wait messages,
-    ...)
-- harddrake2:
-  o add "/dev" to devfs paths
-  o do not offer to configure module when there's no module or when
-    driver is an url or a graphic server
-  o fix embedding
-
-* Fri Feb 21 2003 Damien Chaumette <dchaumette@mandrakesoft.com> 9.1-4mdk
-- drakconnect fixes
-
-* Thu Feb 20 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-3mdk
-- drakboot: fix #1922
-- drakgw, drakboot: remove gtk+ warnings
-- harddrake2: fix latest l10n bugs
-- disdkrake fixes (pixel)
-- drakconnect: dhcp fix (poulpy)
-- printerdrake fix (pixel)
-
-* Thu Feb 20 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-2mdk
-- logdrake: fix #1829
-- translation updates
-- scannerdrake:fix embedding
-- drakxtv: workaround a drakx bug which don't always add bttv to
-  /etc/modules (fix #)
-- printerdrake:
-  o fix embedding
-  o hide the icon when embedded to get more space
-  o various improvements (till)
-- drakfont: fc-cache enhancement (pablo)
-- drakTermServ: fix #1774, #1775 (stew)
-- newt bindind: better trees managment on console (pixel)
-- diskdrake fixes (pixel)
-- xfdrake: log failure sources (pixel)
-
-* Tue Feb 18 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-1mdk
-- fix "nothing to edit" in drakperm (#1769)
-- fix draksec help
-- drakedm: fix badly generated config file by 3rd party progs
-- i18n fixes (pablo, gc)
-- scannerdrake updates (till)
-- diskdrake fixes: raid, ... (pixel)
-- printerdrake fixes (till)
-- drakconnect fix (poulpy)
-
-* Mon Feb 17 2003 Till Kamppeter <till@mandrakesoft.com> 9.1-0.34mdk
-- Fixed automatic print queue generation for HP DeskJet 990C.
-
-* Mon Feb 17 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.33mdk
-- fix wizard mode (pixel)
-
-* Mon Feb 17 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.32mdk
-- harddrake: fix #1718
-- translation snapshot
-
-* Sun Feb 16 2003 Till Kamppeter <till@mandrakesoft.com> 9.1-0.31mdk
-- Various fixes/improvements on printerdrake:
-  o Restructured function "main()"
-  o Auto-generation of print queues during installation
-  o Support for unknown printers in auto-detection and auto-generation of
-    print queues
-  o Fixed display of printer help pages
-  o Fixed determination of default printer
-
-* Fri Feb 14 2003 Damien Chaumette <dchaumette@mandrakesoft.com> 9.1-0.30mdk
-- drakperm fixes
-- drakfont fixes
-
-* Thu Feb 13 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.29mdk
-- fix gc breakage
-
-* Thu Feb 13 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.28mdk
-- vastly improved scannerdrake (till):
-  o fixed scsi/usb/parrallel scanners detection
-  o new known scanners
-  o support scanners with multiple ports 
-  o better configuration files
-  o fix "SnapScan" <-> "snapscan" bug
-  o fix "HP scanners had no manufacturer field"
-- drakxservices fixes (pixel)
-
-* Wed Feb 12 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.27mdk
-- fix embedded drakconnect: 
-  o no crash on expert "configure" buttons
-  o better behaviour when buttons are hidden/showx
-- harddrake/draksound: card list update
-- pixel:
-  o diskdrake: 
-    * discrimate hpfs and ntfs
-    * more precise message when formatting / fsck'ing / mounting
-      partitions
-    * hide passwords for smb mount points
-  o XFdrake: fix #707
-- drakperm: first gtk+2 port fixes, still more to come (pouly & me)
-- fix drakbug help (daouda)
-- drakconnect fixes (frederic lepied)
-- updated translations (pablo)
-
-* Fri Feb  7 2003 Damien Chaumette <dchaumette@mandrakesoft.com> 9.1-0.26mdk
-- drakconnect : dhcp & zeroconf fixes
-- drakfont : full Gtk2
-
-* Thu Feb  6 2003 Damien Chaumette <dchaumette@mandrakesoft.com> 9.1-0.25mdk
-- drakconnect fixes
-
-* Thu Feb  6 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.24mdk
-- fix drakfloppy
-- diskdrake: s/fat/windows/ because of ntfs
-- poulpy:
-  o drakfont updates
-  o drakconnect fixes
-- translation updates (pablo & co)
-- add drakedm to choose display manager
-- drakhelp: install help on demand (deush)
-- harddrake2: fix for rtl languages
-
-* Wed Feb  5 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.23mdk
-- draksec cleanups
-- fix harddrake2 embedding in mcc
-- update translations (pablo)
-
-* Tue Feb  4 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.22mdk
-- add support for adiusbadsl 1.0.2 (fponsinet)
-- faster draksec shutdown
-
-* Mon Feb  3 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.21mdk
-- draksec:
-  o gui look nicer
-  o add help for check cron 
-  o fix "first notebook page do not show up"
-  o do not be listed in drakxtools-http
-  o faster startup
-- sanitize draxktools-http service script
-- diskdrake: ntfs resizing bug fixes (pixel)
-
-* Fri Jan 31 2003 Damien Chaumette <dchaumette@mandrakesoft.com> 9.1-0.20mdk
-- drakconnect: add more zeroconf support
-
-* Thu Jan 30 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.19mdk
-- printerdrake: fixes for new foomatic
-- requires a recent enought perl-GTK2
-- harddrake2:
-  o fix misdetection of nvnet part of nvforce2 chips
-  o move nforce system controllers in bridge class (which is renamed
-    "bridges and system controllers")
-  o mark class names as being translatable
-- logdrake works again in both embedded and non embedded cases
-- translation updates, add Tajiki (pablo)
-- interactive: add support for trees on console (pixel)
-- diskdrake: ntfs resizing support (pixel) (acked by ntfsresize author)
-
-* Wed Jan 29 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.18mdk
-- fix locales managment for non interactive tools (aka pure gtk+ tools)
-- harddrake2:
-  o restore cd/dvd burners detection
-  o fix doble detection of pci modems
-  o don't display vendor & description when we don't have them for ata disks
-  o fix ghost modem detection
-  o logdrake is embeddable again
-
-* Tue Jan 28 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.17mdk
-- drakfont updates (poulpy):
-  o fix progress bar,
-  o about box,
-  o ugly border when embedded.
-- printerdrake: various fixes for local printer (till)
-- small fix in drakgw (florin)
-
-* Mon Jan 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.16mdk
-- fix wait messages (gc)
-- vietnamese translation update
-
-* Mon Jan 27 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.15mdk
-- diskdrake:
-  o make sub window be modal
-  o fix text mode (pixel)
-- drakconnect: 
-  o don't log actions not done
-  o fix modem detection (poulpy)
-  o cleanups (poulpy, pixel)
-- draksound: remove last source of "unlisted driver" because of hand
-  edited /etc/modules.conf
-- drakxtv: add test mode
-- fix encoding conversions for non latin1 (gc)
-- harddrake2:
-  o use new help system
-  o make sub window be modal
-  o configure sound slots on bootstrapping
-- logdrake:
-  o don't display "wait while parsing" window when embedded in mcc
-  o log all drakx tools (not only the first one)
-- mousedrake: cleanups (pixel, gc)
-- printerdrake: updates for new foomatic (till)
-- requires old perl-gtk for drakfloppy and net_monitor which works
-  again
-- translation updates (pablo)
-- xfdrake: various fixes (pixel)
-
-* Fri Jan 24 2003 Damien Chaumette <dchaumette@mandrakesoft.com> 9.1-0.14mdk
-- drakconnect :
-  o get back serial modem detection
-
-* Thu Jan 23 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.13mdk
-- fix standalone apps error on --help
-- many enhancements to draksound:
-  o no more unlisted message
-  o "how to debug sound problem" window
-  o offer to pick any driver if no detected sound card (for eg isa
-    card owners) or if no alternative driver 
-  o handle proprietary drivers
-  o fix unchrooted chkconfig call
-- draksec: display help in tooltips
-- drakconnect :
-  o cleaning (poulpy, me)
-  o zeroconf support (poulpy)
-- big interactive cleanup for drakx and focus handling (pixel)
-- boot floppy fixes (pixel)
-- diskdrake: don't display twice the same mount point (pixel)
-- keyboardrake:
-  o cleanups (pixel)
-  o update supported keyboard layouts ... (pablo)
-- xfdrake: (pixel)
-  o cleanups
-  o don't use anymore qiv to render background while testing X config
-- add drakpxe (francois)
-- printerdrake:
-  o updates (till)
-  o fix chrooted services (me)
-- translation updates (many people)
-- mousedrake: fix scrolling test (gc)
-- ugtk2: fix some (small) memory leaks (gc)
-- ppc updates (stew)
-- english sentences proofreading (pablo, stew)
-- fix gtk+-2 port of mousedrake (me), 
-
-* Fri Jan 17 2003 Damien Chaumette <dchaumette@mandrakesoft.com> 9.1-0.12mdk
-- drakconnect : 
-  o little dhcp behavior rework
-  o fix /etc/hosts localdomain
- 
-* Thu Jan 16 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.11mdk
-- snapshot
-
-* Thu Jan 09 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.10mdk
-- draksound : fix and update driver list
-- printerdrake: fix staroffice/ooffice configuration (till)
-
-* Tue Jan 07 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.9mdk
-- fix wizards
-
-* Tue Jan  7 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.8mdk
-- update french translation
-- harddrake: treat usb hubs as usb controllers
-- logdrake: set it non editable
-- printerdrake:
-  o simplify gimp-print configuration 
-  o let it work
-- various cleanups (pixel)
-- standalone tools: first help system bits (deush)
-
-* Mon Jan  6 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.7mdk
-- printerdrake fixes
-
-* Thu Jan  2 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.6mdk
-- embedding fixes
-- wizard fixes
-- fix permissions setting
-- internals cleanups
-- drakconnect & printerdrake fixes
-- gtk+-2 fixes
-- faster xfdrake startup
-- translations update
-- fix redefinition warnings
-
-* Mon Dec 30 2002 Stefan van der Eijk <stefan@eijk.nu> 9.1-0.5mdk
-- BuildRequires: perl-MDK-Common-devel
-
-* Thu Dec 19 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.4mdk
-- gtk+2 snapshot
-
-* Wed Dec 04 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.3mdk
-- snapshot for mcc
-
-* Mon Nov 18 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.2mdk
-- more printerdrake redesign
-- more perl_checker fixes
-- standalone : provide a common cli options/help manager
-- logdrake : use my_gtk to transparently handle embedding and ease future gtk2 port
-- kill dead code
-
-* Fri Nov 15 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-0.1mdk
-- bump version
-- add missing printer/ directory
-- typo fix in drakxtv
-
-* Thu Nov 14 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.12-1mdk
-- printerdrake cleanups
-- various perl lifting
-- harddrake:
-  o display floppy driver type as well as mouse type & network printer port
-  o fix vendor/model spliting for eide disks when there's neither
-    space nor separator
-  o v4l card lists : resync with latest bttv & saa7134 drivers
-
-* Mon Nov 11 2002 Pixel <pixel@mandrakesoft.com> 1.1.11-3mdk
-- bug fix (most drakxtools)
-
-* Sun Nov 10 2002 Pixel <pixel@mandrakesoft.com> 1.1.11-2mdk
-- bug fix (printerdrake, netconnect)
-
-* Thu Nov  7 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.11-1mdk
-- harddrake:
-  o only display "selected" fields, skip other (aka only display
-    fields we described)
-  o print name and value of skipped fields on console
-  o only display help topics related to currently displayed fields in
-    right "information" frame
-  o if no device selected, display a message explaining the help dialog
-  o don't display modem when there're none
-  o describe most cpu fields
-  o simplify the coloring logic
-
-- detect_devices :
-  o getModem() : simplify
-  o getCPUs() : fix cpu fields parsing
-
-* Wed Nov  6 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.10-4mdk
-- s/_(/N(/
-
-* Tue Nov 05 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.10-3mdk
-- rebuild for newt
-
-* Mon Nov  4 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.10-2mdk
-- snapshot
-
-* Wed Oct 16 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.10-1mdk
-- harddrake :
-  o try to discriminate webcams from video cards
-  o fix not displayed unknow devices
-- detection engin :
-  o update eide vendors list
-  o detect cpus
-  o adsl work (damien)
-- drakbug:
-  o make ui faster
-  o fix displayed result when the package isn't installed
-- drakTermServ : fixes (stew)
-- smb updates (stew)
-- fix broken danish translations (wrong unicode encoding) (pablo)
-- update other translations by the way (pablo)
-
-* Fri Sep 20 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-53mdk
-- remove useless warnings from harddrake
-
-* Fri Sep 20 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-52mdk
-- fix draksec
-
-* Fri Sep 20 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-51mdk
-- printerdrake: various fixes (till)
-- drabug:
-  o fix spurious '1' file creation
-  o don't print error messages when a program isn't found
-
-* Tue Sep 17 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-50mdk
-- draksec:
-  o add ignore option to pull-down list
-  o remove not anymore used libsafe option
-  o save items
-  o reread already set item
-
-* Tue Sep 17 2002 Warly <warly@mandrakesoft.com> 1.1.9-49mdk
-- printerdrake fix for webfetch
-
-* Mon Sep 16 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-48mdk
-- fix die wizcancel in non wizard mode (dams sucks?)
-
-* Sat Sep 14 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-47mdk
-- fix printerdrake network scanning for printers/print servers hangs
-  on with firewalled machines (till)
-- fix printerdrake curl dependancy break urpmi (till)
-- obsoletes drakfloppy (daouda)
-
-* Thu Sep 12 2002 Damien Chaumette <dchaumette@mandrakesoft.com> 1.1.9-46mdk
-- fix broken net_monitor
-
-* Thu Sep 12 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-45mdk
-- try to fix drakgw & drakfirewall thx to pixel and florin
-- fix drakfloppy and logdrake (tv)
-
-* Wed Sep 11 2002 Damien Chaumette <dchaumette@mandrakesoft.com> 1.1.9-44mdk
-- drakconnect :
-  o fix RTC, ISDN detection
-  o fix pcmcia cards detection / module list
-  o check DNS and Gateway IPs
-
-* Mon Sep  9 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-43mdk
-- move back draksec to drakxtools
-- harddrake:
-  o don't pollute sbin namespace with one shot scripts
-  o add run wrapper script for harddrake service
-  o disable ?dm part
-- draksound:
-  o really display default driver
-  o wait message while switching
-- update translations
-
-* Sat Sep  7 2002 Daouda LO <daouda@mandrakesoft.com> 1.1.9-42mdk
-- cvs up before packaging (fix messy drakboot conf). 
-
-* Fri Sep  6 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-41mdk
-- fix harddrake service, run non essential checks after dm start
-
-* Fri Sep  6 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-40mdk
-- harddrake:
-  o fix usb mouse detection
-  o list --test in -h|--help
-  o enhanced draksound :
-    * blacklist cs46xx and cs4281 drivers : we won't unload these
-      drivers since they're know to oopses the kernel but just warn
-      the user
-    * chroot aware - can be used in drakx
-    * workaround alsaconf's aliases
-    * add an help button that describe ALSA and OSS
-    * display current driver, its type (OSS or ALSA), and the default
-      driver for the card
-    * if there's no (usb|pci) sound card, print a note about sndconfig
-      for isa pnp cards
-
-* Fri Sep 06 2002 David BAUDENS <baudens@mandrakesoft.com> 1.1.9-39mdk
-- Re-add old obsolete Aurora's images needed by drakboot (this is stupid)
-
-* Fri Sep 06 2002 David BAUDENS <baudens@mandrakesoft.com> 1.1.9-38mdk
-- Update mdk_logo.png
-- Update drakbackup icons
-
-* Fri Sep  6 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-37mdk
-- drakperm, drakbackup: fix embedded mode
-
-* Fri Sep  6 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-36mdk
-- gtkicons_labels_widget() :
-  o add support for mcc' big icon animation
-  o cleanups
-  o simplify notebook redrawing vs flick/icon_aligment
-
-* Thu Sep  5 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-35mdk
-- Update banners (David Baudens)
-- my_gtk snapshot for rpmdrake (gc)
-
-* Wed Sep  4 2002 Stew Benedict <sbenedict@mandrakesoft.com> 1.1.9-34mdk
-- add perl-Expect requires for drakbackup (now enabled)
-
-* Wed Sep  4 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-33mdk
-- harddrake: fix scrolling tree
-
-* Wed Sep  4 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-32mdk
-- embbed drakbackup
-
-* Wed Sep  4 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-31mdk
-- snapshot for gtktext_insert with color/font capabilities (rpmdrake)
-
-* Tue Sep  3 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-30mdk
-- ugtk:
-  o better fix for glib warning that don't make drakx feel mad
-  o make icons more transparent when selected in mcc
-
-* Mon Sep  2 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-29mdk
-- harddrake:
-  o use new icons
-  o add menu icon
-- mcc: ensure all binaries're there
-- ugtk: remove all glib warnings
-
-* Mon Sep  2 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-28mdk
-- tinyfirewall is now drakfirewall (daouda)
-
-* Fri Aug 30 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-27mdk
-- ugtk: add alpha blendering support for mcc's icons through pixbufs
-  o readd gdkpixbuf support
-  o ensure imlib is used by default to load files, not gdk-pixbuf
-  o compose_with_back(): load a png icon into a pixbuf and call
-    compose_pixbufs with background pixbuf
-  o compose_pixbufs(): render transparent icon onto background into a
-    new pixbuf
-  o merge gtkcreate_png_pixbuf() from gdk-pixbuf-0-branch : load an
-    icon into a pixbuf
-    gdk-pixbuf-0-branch also uses it to simplify a lot of code
-  o gtkicons_labels_widget() :
-    * add a new background pixbuf parameter that'll be composited with icons
-    * render icons with alpha blender in right area
-    * kill imlib_counter
-    * kill imlib usage for 
-    * kill dead code (was dead since i fixed mcc memory leaks)
-- fix init-script-without-chkconfig-{post,preun}
-
-* Thu Aug 29 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-26mdk
-- harddrake: 
-  o quit button really work in embedded mode
-  o move so called eide raid controllers from unknown to ata
-    controllers
-- logdrake: add a scrollbar when embedded in mcc
-
-* Thu Aug 29 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-25mdk
-- snapshot (drakupdate_fstab --auto feature (pixel), logdrake don't
-  display too much information in explanations to save space for what's
-  useful)
-
-* Thu Aug 29 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-24mdk
-- snapshot for display_info availability in ask_browse for rpmdrake
-
-* Thu Aug 29 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-23mdk
-- drakupdate_fstab first appearance
-
-* Wed Aug 28 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-22mdk
-- harddrake: don't display the menu bar in embedded mode, but a "quit"
-  button
-
-* Tue Aug 27 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-21mdk
-- drakconnect fixes (damien)
-
-* Fri Aug 23 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-20mdk
-- draksound: display right message ("no alternative") when no
-  alternative rather than "no known module"
-- fixes for multiple NIC boxes (florin)
-
-* Fri Aug 23 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-19mdk
-- draksound: use right sound slot
-
-* Fri Aug 23 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-18mdk
-- ugtk: fix most mcc memory leaks (pending ones seems related to perl-gtk)
-- tinyfirewall: misc fixes (pixel)
-
-* Fri Aug 23 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-17mdk
-- snapshot (including new tinyfirewall)
-
-* Thu Aug 22 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-16mdk
-- snapshot (for rpmdrake)
-
-* Wed Aug 21 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-15mdk
-- add draksound
-- mousedrake: default usbmouse link to input/mice rather than
-  input/mouse0, thus giving support for multiple mouse, wacom tables,
-  ...
-
-* Wed Aug 21 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-14mdk
-- fix dangling waiting watch mousecursor (well, please test!)
-- adding draksplash (nathan)
-
-* Mon Aug 19 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-13mdk
-- snapshot (including better XFdrake)
-
-* Wed Aug 14 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-12mdk
-- snapshot (fix diskdrake making a hell of fstab)
-
-* Tue Aug 13 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-11mdk
-- snapshot (including "diskdrake --dav")
-
-* Mon Aug 12 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-10mdk
-- snapshot (various bug fixes including no-floppy-box-segfault)
-
-* Fri Aug  9 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-9mdk
-- harddrake:
-  o module configuration window:
-    * read current options
-    * don't display ranges, we cannot really know when a range
-      is needed and so display them in wrong cases
-    * read & parse modules.conf only when configuring the module,
-      not on each click in the tree
-    * don't display ranges, we cannot really know when a range is needed 
-      and so display them in wrong cases (kill code, enable us to simplify
-      modparm::parameters after
-
-* Fri Aug  9 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-8mdk
-- snapshot
-
-* Tue Aug  6 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-7mdk
-- harddrake, scannerdrake: add scsi scanner detection support
-- harddrake: detect external modems
-
-* Tue Aug  6 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-6mdk
-- rebuild for perl thread-multi
-
-* Mon Aug  5 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-5mdk
-- snapshot for rpmdrake
-
-* Fri Aug  2 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-4mdk
-- have interactive::gtk::exit in my_gtk so that my_gtk apps can call
-  it and then fix the problem of clock mouse cursor on exit
-
-* Thu Aug  1 2002 Pixel <pixel@mandrakesoft.com> 1.1.9-3mdk
-- keyboarddrake now handles choosing toggle key (XkbOptions)
-
-* Thu Aug  1 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.9-2mdk
-- remove obsoleted drakconf
-- various fixes
-- [ugtk::gtkcreate_png] suppress all gtk warnings
-- updated vietnamese translation (pablo)
-- [interactive::gtk] fix many warnings when {icon} is not given (pixel)
-
-* Thu Aug  1 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.9-1mdk
-- integrate patches in my_gtk and ugtk for new rpmdrake:
-  - [ugtk] add "gtkentry" so that we can create an entry and set
-    initial value in one call
-  - [my_gtk::main] don't set the events, to fix keyboard focus
-    problem in entries when embedded
-  - [my_gtk::_create_window] add $::noBorder, to not have a frame
-    in the main window, so that it's possible to end up with
-    windows with no border
-  - [my_gtk] add ask_dir which is a ask_file with only the dir list
-  - [my_gtk] add ask_browse_tree_info to the export tags, and:
-    - add support for parents with no leaves, so that then we can
-      partially build the trees (for speedup)
-    - add "delete_all" and "delete_category" callbacks
-    - use Gtk::CList::clear when removing all the nodes, much
-      speedup
-- Titi, harddrake :
-	o workaround for the busy mouse cursor set by
-	  gtkset_mousecursor_wait() in my_gtk::destroy
-	o remove debugging prints
-	o cleanups
-    - drakx: various cleanups
-
-* Thu Aug  1 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-16mdk
-- my_gtk:
-	o splitup it into my_gtk and ugtk as done by dams
-	o resync with dams
-	o increase the icon blinkage from 50ms to 100ms
-- harddrake: 
-	o use new embedded managment
-
-* Thu Aug  1 2002 Pixel <pixel@mandrakesoft.com> 1.1.8-15mdk
-- harddrake (titi):
-	o add embedded mode for drakconf
-	o print less gtk warnings
-	o module configuration window
-- fix mousedrake
-- fix XFdrake in embedded
-- enhance XFdrake
-- don't require detect-lst (titi)
-- printerdrake work in progress (till)
-
-* Wed Jul 31 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-14mdk
-- harddrake:
-	o fix pcmcia network card detection (unknown => ethernet)
-	o fix scsi detection :
-		* fix SCSI controllers detection (unknown => scsi controllers)
-		* fix misdetection of scsi devices as scsi host adapter
-		* fix double scsi devices detection (both unknown and real
-		  category)
-- updated translations
-- fix mousedrake (pixel)
-- drakbug, drakbackup: spell/i18n fixes (pixel, me)
-- xfdrake: fixes (pixel)
-- new draksex (stew)
-- diskdrake: (pixel)
-	o fix LVM on RAID
-	o explain the pb when maximal number of primary partitions is reached
-
-* Mon Jul 29 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-13mdk
-- harddrake:
-	o service: fix config file conversion
-	o harddrake::ui :
-	  * s/channel/Channel/
-	  * bus_id is for usb devices too
-	  * remove obsolete fields info and name
-	  * add nbuttons, device, old_device descriptions
-- updated XFdrake (gtk resolution chooser work, i810 fixes, ...) (pixel)
-- remove "Requires: groff" (nobody know why it's there) (Pixel)
-- updated translations (nl/id/vi)
-- standalone/logdrake: (deush)
-	o don't display services that are not installed
-	o word wrap string correctly
-	o cleanup
-- bootloader.pm: (pixel)
-	o let the bootloader::mkinitrd error be seen by the GUI
-	o fix dying when mkinitrd doesn't create an initrd
-- interactive.pm: error messages fixes (pixel)
-- diskdrake: add 0x35 partition table id meaning JFS (under OS/2)
-  (thank to Mika Laitio)
-- printerdrake: first step of automatic HP multi-function device
-  configuration with HPOJ 0.9. (till)
-- drakTermServ (stew)
-	o Check for/install terminal-server and friends.
-	o More intelligent error message when mkisofs fails.
-	o  Cleanup code for use strict.
-	o Fix crash when no backup dhcpd.conf.
-- drakbackup: (stew)
-	o Numerous GUI crash fixes, oddities. 
-	o Install	needed packages.
-	o Fix email, daemon modes.
-	o Add rsync, webdav, cd, tape capabilities. 
-	o Consolidate net method setup screens.
-	o Add CD device capability query.
-
-* Thu Jul 25 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-12mdk
-- simplify harddrake service:
-	o we don't need to set media_type, we don't use it
-	o mouse and mass storage media use the same key, let merge their
-	  code path
-	o merge timeout and cancel cases
-
-- harddrake::data : only do one probeall here (there's still many in
-  detect_devices, probing caching should go there)
-
-- harddrake:ui : 
-	o add a fields data structure:
-		* put together field translation and field description
-		* this enable to get rid of %reverse_fields usage & creation
-		* this ensure all field names & translations are marked
-		  translatables for gettext
-		* move $wait declaration around its usage and explicit its
-            destruction
-		* remove usb debugging message needed to trace the null
-		  description bug i fixed in ldetect
-		* simplify the device fields rendering "because of" the
-            above
-		* simplify the help window creation/display/destruction
-		  (only one statement left)
-	o explicitely call interactive->exit
-	o remove all "no signal to disconnect" gtk+ warnings 
-
-
-* Thu Jul 25 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-11mdk
-- rebuild against new libldetect (fix (null) descriptions)
-- new XFdrake (pixel)
-- harddrake:
-	o devfs names
-	o scanner support;
-		* don't account scanners as unknown devices
-		* split scannerdrake:val into vendor and description
-		* don't display bogus "val:%HASH"
-- updated translations (fr, pl)
-- tools can be runned on console again
-
-* Tue Jul 23 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-10mdk
-- harddrake :
-	o remove - between vendor and model for ibm eide disks
-	o network devices are configurable again now
-- draksec : typo fix (deush)
-
-* Tue Jul 23 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-9mdk
-- harddrake :
-	o don't show "cancel" button in about and help windows
-	o service: convert config file from plain perl to Storable binary
-	  file (faster startup)
-- general reorganization cleanup:
-    o move interactive_* into interactive::*
-    o move partition_table_* into partition_table::*
-- XFdrake: more cleanups (pixel)
-
-* Sun Jul 21 2002 Pixel <pixel@mandrakesoft.com> 1.1.8-8mdk
-- new snapshot (beware of XFdrake)
-
-* Thu Jul 18 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-7mdk
-- remove last draknet reference in harddrake::ui
-- disable diagnostics and strict mode
-
-* Thu Jul 18 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-6mdk
-- able to restart WindowMaker if needed
-- draknet is dead; vival el drakconnect
-- devices managment:
-	o no need to write /etc/sysconfig/harddrake2/previous_hw in
-  	  %%post since harddrake2 service doesn't configure anything if
-  	  previous config was empty
-	o fix usb mac mouse detection
-	o move scsi/ata controllers, burners, dvd, ... from
-	  unknown/others into their own"non configurable" sections
-	o fix problems with usb-interface
-- XFdrake: big cleanup
-- general cleanups
-- translation updates
-
-* Thu Jul 11 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-5mdk
-- drakx :
-	o code enhancement: increase coherency around the whole drakx
-	  code regarding devices
-	o decrease the debug verbosity
-- harddrake2 :
-	o i18n:
-		* move $version out of translatable strings
-	o ui:
-		* increase default main window size
-		* put back the hw tree root
-		* eide devices: split info between vendor and model strings
-- spec :
-	o fix parrallel build
-	o list and describe all gui tools from drakxtools
-
-* Wed Jul 10 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-4mdk
-- fix perl depandancy
-
-* Tue Jul 09 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-3mdk
-- harddrake2:
-	o no need to 'use strict' in "binary" => remove warnings 
-	o fix boot freeze on hw change: initscript was running us with
-	  stdout redirected to /dev/null; just use a small sh wrapper to
-	  fix it
-	o harddrake::bttv: only log in standalone mode
-	o display channel of eide devices 
-
-- spec:
-	o reorder entries in description
-	o list all entries in first line of description
-	o fix post: add start argument
-
-* Mon Jul 08 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-2mdk
-- spec :
-  o enhance descriptions
-  o various spec clean
-  o harddrake :
- 	* obsoletes/provides libdetect-lst, libdetect-lst-devel, detect,
-	  detect-lst, kudzu-devel
-	* split package between harddrake and harddrake-ui to minimize
-    	  the harddrake service dependancies
-	* add missing /etc/sysconfig/harddrake2
-- harddrake2 :
-  o cache detect_devices::probeall(1) so that hw probe is run once
-  o hw configuration :
-  	* eide devices: split up info field into vendor and model fields
-  o ui:
-	* enhanced help
-	* mice:
-		- s/nbuttons/Number of buttons/ 
-		- delete qw(MOUSETYPE XMOUSETYPE unsafe)
-	* complete help
-	* center the main window
-	* remove drakx decorations
-	* don't display "run config tool" button if no configurator
-	  availlable
-  o logic:
-	* skip configuration on firt run
-	* don't restart harddrake on install
-	* skip hw classes without configurator (which'll have a
-	  configurator after porting updfstab)
-  o service :
-	* only do the job at startup
-	* add "please wait" message
-	* really don't cry when no previous config
-
-* Mon Jul 08 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.8-1mdk
-- snapshot
-- new entries: 
-	o harddrake2 : new hardware detection && configuration tool
-	o drakbugreport: bug reporting tool a la Kde (not working!)
-	o drakTermServ : configuration tool for diskless stations.
-- updated programs :
-	o drakxtv: if runned by root, offer to configure bttv for most tv cards
-	o disdrake:
-		* enhanced raid & lvm support,
-		* check if programs (ie jfsprogs) are installed
-		* cleanups
-	o Xconfigurator: bug fix
-- general : better supermout support, use new libldetect, various bug fixes
-
-* Tue Jun 18 2002 Frederic Lepied <flepied@mandrakesoft.com> 1.1.7-99mdk
-- added new draksec from Christian and a new way to build the packages (make rpm)
-
-* Mon Apr 15 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.7-98mdk
-- snapshot
-- add drakxtv description
-- drakxtv : now auto guess the country and the freq table
-
-* Fri Mar 15 2002 dam's <damien@mandrakesoft.com> 1.1.7-97mdk
-- snapshot. final release 1
-
-* Tue Mar 12 2002 dam's <damien@mandrakesoft.com> 1.1.7-96mdk
-- added onboot options foreach network cards
-- resolv.conf and domain name bug fixed
-
-* Tue Mar 12 2002 dam's <damien@mandrakesoft.com> 1.1.7-95mdk
-- included drakproxy
-- corrected various timeout (net_monitor, internet connection tests)
-- snapshot
-
-* Mon Mar 11 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-94mdk
-- various
-
-* Fri Mar  8 2002 dam's <damien@mandrakesoft.com> 1.1.7-93mdk
-- drakfont GUI corrected
-- new drakproxy
-
-* Fri Mar 08 2002 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-92mdk
-- fixes for NVIDIA drivers support in XFdrake.
-
-* Thu Mar  7 2002 dam's <damien@mandrakesoft.com> 1.1.7-91mdk
-- lot of bugfixes
-- (dams)
-	* standalone/net_monitor: make gc happy
-	* modparm.pm, share/po/fr.po: corrected
-	* standalone/draknet: corrected network/internet restart when already
-	connected
-	* standalone/drakfont: corrected bad system command
-	* standalone/drakautoinst: corrected HASH and ARRAY label
-- (gc)
-	* standalone/drakgw: 
-	  - call net_monitor to disable internet connection before
-	    network-restart
-	  - user return value when status'ing the
-	  initscripts rather than grepping their text output
-- (pixel)
-	* standalone/fileshareset (nfs_exports::update_server): ensure portmap
-	is running
-
-* Wed Mar  6 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-90mdk
-- corrected font in wizard (dams)
-- localedrake: (pixel)
-  * fix dummy entries in .i18n for chineese
-  * take sysconfig/i18n into account when no .i18n
-  * when called by kcontrol with --apply, don't modify kde config files,
-    kcontrol takes care of it more nicely
-- diskdrake: translate actions in text mode (pixel)
-- drakxtv fixed (titi)
-
-* Sun Mar  3 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-89mdk
-- (gtkicons_labels_widget): pass the widget instead of directly passing the font
-  (for drakconf)
-
-* Sun Mar  3 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-88mdk
-- (gtkicons_labels_widget): pass the style instead of directly passing the font
-  (for drakconf)
-
-* Fri Mar  1 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-87mdk
-- new snapshot (including a modified localedrake)
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-86mdk
-- corrected modinfo path. isa modules options should now work.
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-85mdk
-- corrected spec so that net_monitor.real get included too.
-
-* Thu Feb 28 2002 dam's <damien@mandrakesoft.com> 1.1.7-84mdk
-- snapshot
-
-* Wed Feb 27 2002 dam's <damien@mandrakesoft.com> 1.1.7-83mdk
-- snapshot
-
-* Tue Feb 26 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-82mdk
-- move XFdrake to drakxtools from drakxtools-newt 
-(otherwise it doesn't work, since it needs perl-GTK & xtest)
-
-* Tue Feb 26 2002 dam's <damien@mandrakesoft.com> 1.1.7-81mdk
-- added groff require
-
-* Tue Feb 26 2002 dam's <damien@mandrakesoft.com> 1.1.7-80mdk
-- isa card modules correction. Should work in post install
-- drakfont correction
-
-* Sat Feb 23 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-79mdk
-- require latest perl-MDK-Common
-- corrected icon paths (thanks to garrick)
-- don't create devices when /dev is devfs mounted (thanks to Andrej Borsenkow)
-
-* Fri Feb 22 2002 dam's <damien@mandrakesoft.com> 1.1.7-78mdk
-- corrected icon paths
-
-* Thu Feb 21 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-77mdk
-- now we can live without kdesu ; and drakxtools-newt only requires
-  usermode-consoleonly
-
-* Tue Feb 19 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-76mdk
-- fix diskdrake --nfs & --smb
-
-* Tue Feb 19 2002 dam's <damien@mandrakesoft.com> 1.1.7-75mdk
-- required specific version of perl MDK Common
-
-* Tue Feb 19 2002 dam's <damien@mandrakesoft.com> 1.1.7-74mdk
-- various things not described by the last packager
-- new png/wpm search policy in my_gtk
-
-* Mon Feb 18 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-73mdk
-- snapshot
-
-* Sat Feb 16 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-72mdk
-- localedrake now handles KDE
-- diskdrake now handles XFS on LVM live resizing (growing only)
-
-* Fri Feb 15 2002 dam's <damien@mandrakesoft.com> 1.1.7-71mdk
-- snapshot
-
-* Thu Feb 14 2002 dam's <damien@mandrakesoft.com> 1.1.7-70mdk
-- snapshot
-
-* Mon Feb 11 2002 dam's <damien@mandrakesoft.com> 1.1.7-69mdk
-- fixed bad stuff.so in drakxtools
-
-* Fri Feb  8 2002 dam's <damien@mandrakesoft.com> 1.1.7-68mdk
-- new gfx
-- various fix
-- major printerdrake updates
-
-* Thu Feb 07 2002 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.7-67mdk
-- add drakxtv
-
-* Thu Feb  7 2002 dam's <damien@mandrakesoft.com> 1.1.7-66mdk
-- new package, various wizard, mygtk, disdrake improvment.
-
-* Wed Feb  6 2002 dam's <damien@mandrakesoft.com> 1.1.7-65mdk
-- logdrake updates
-- wizard fix
-
-* Tue Jan 29 2002 dam's <damien@mandrakesoft.com> 1.1.7-64mdk
-- last mygtk, drakbackup...
-- disdrake fixed
-- snapshot
-
-* Sun Jan 27 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-63mdk
-- cleanup drakxtools-newt (move all gtk stuff to drakxtools)
-- reworked and split diskdrake
-- add logdrake
-
-* Fri Jan 25 2002 dam's <damien@mandrakesoft.com> 1.1.7-62mdk
-- bug corrections, improvements
-- new advertising engine
-- new gtkicons_labels_widget
-
-* Tue Jan 22 2002 dam's <damien@mandrakesoft.com> 1.1.7-61mdk
-- new gtkicons_labels_widget for new mcc.
-
-* Fri Jan 18 2002 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-60mdk
-- first support for 'Explanations'
-
-* Fri Jan 18 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-59mdk
-- Drakbackup without unstable options for qa. 
-- DrakFont update warning message (qa).
-
-* Wed Jan 16 2002 Pixel <pixel@mandrakesoft.com> 1.1.7-58mdk
-- ensure lsnetdrake is included
-
-* Tue Jan 15 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-57mdk
-- Drakbackup daemon, backend mode (-show-conf -daemon -debug -help -version) and report mail corrections.
-- DrakFont gi and progress bar problems.
-
-* Tue Jan 14 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-56mdk
-- New drakbackup version, ftp backup work, new pixmaps.
-- DrakFont with new pixmaps. 
-
-* Mon Jan 14 2002 Stefan van der Eijk <stefan@eijk.nu> 1.1.7-55mdk
-- BuildRequires
-
-* Fri Jan 11 2002 dam's <damien@mandrakesoft.com> 1.1.7-54mdk
-- snapshot
-
-* Wed Jan  9 2002 dam's <damien@mandrakesoft.com> 1.1.7-53mdk
-- snapshot
-- new code in my_gtk
-
-* Tue Jan  8 2002 Sebastien Dupont <sdupont@mandrakesoft.com>  1.1.7-52mdk
-- New drakbackup version, incremental backup and restore should work. 
-
-* Sat Dec 22 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-51mdk
-- fix  conflicts in drakbackup cvs version.
-
-* Sat Dec 22 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-50mdk
-- new drakbackup version.
-
-* Mon Dec 10 2001 Sebastien Dupont <sdupont@mandrakesoft.com> 1.1.7-49mdk
-- fix drakfont path problem.
-- new version of drakbakup
-
-* Wed Dec  5 2001 dam's <damien@mandrakesoft.com> 1.1.7-48mdk
-- corrected syntax error
-
-* Tue Dec  4 2001 dam's <damien@mandrakesoft.com> 1.1.7-47mdk
-- avoid network test freeze
-- added drackbackup
-- snapshot
-
-* Fri Nov 30 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-46mdk
-- add diskdrake --fileshare
-
-* Thu Nov 29 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-45mdk
-- new diskdrake including fileshareset/filesharelist stuff
-
-* Mon Nov 26 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-44mdk
-- use the CVS, not my devel (instable) version
-
-* Fri Nov 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-43mdk
-- any.pm fixed
-
-* Mon Nov 19 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-42mdk
-- scannerdrake update to add dynamic support
-
-* Mon Nov 12 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-41mdk
-- scannerdrake update with new fat ScannerDB
-
-* Mon Nov  5 2001 dam's <damien@mandrakesoft.com> 1.1.7-40mdk
-- corrected typo in drakautoinst
-
-* Fri Nov  2 2001 dam's <damien@mandrakesoft.com> 1.1.7-39mdk
-- release
-
-* Fri Oct 26 2001 dam's <damien@mandrakesoft.com> 1.1.7-38mdk
-- drakautoinst & drakfont updated
-
-* Thu Oct 25 2001 dam's <damien@mandrakesoft.com> 1.1.7-37mdk
-- big improvement on drakautoinst
-- draknet : connection script updated 
-
-* Thu Oct 18 2001 dam's <damien@mandrakesoft.com> 1.1.7-36mdk
-- draknet/net_monitor corrected
-- corrected bad stuff.so
-
-* Tue Oct 16 2001 dam's <damien@mandrakesoft.com> 1.1.7-35mdk
-- make rplint happier
-
-* Wed Oct 10 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-34mdk
-- snapshot with scanner stuff
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-33mdk
-- snapshot
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-32mdk
-- Last translations.
-
-* Mon Sep 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-31mdk
-- snapshot. draknet bugfix.
-
-* Sun Sep 23 2001 dam's <damien@mandrakesoft.com> 1.1.7-30mdk
-- snapshot. Included last printer and draknet corrections.
-
-* Fri Sep 21 2001 dam's <damien@mandrakesoft.com> 1.1.7-29mdk
-- typo in adsl.pm, Xconfigurator fix.
-
-* Thu Sep 20 2001 dam's <damien@mandrakesoft.com> 1.1.7-28mdk
-- snapshot. draknet works now. 
-
-* Wed Sep 19 2001 dam's <damien@mandrakesoft.com> 1.1.7-27mdk
-- snapshot
-
-* Mon Sep 17 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-26mdk
-- snapshot
-
-* Mon Sep 17 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-25mdk
-- snapshot
-
-* Sat Sep 15 2001 dam's <damien@mandrakesoft.com> 1.1.7-24mdk
-- snapshot with printer, draknet & install fixes
-
-* Fri Sep 14 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-23mdk
-- snapshot with latest XFdrake fixes.
-
-* Fri Sep 14 2001 dam's <damien@mandrakesoft.com> 1.1.7-22mdk
-- snapshot
-
-* Thu Sep 13 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-21mdk
-- fix Xinerama for Matrox cards (restore XFree86 4.1.0 without DRI).
-- removed Modeline 1024x768 in 97.6 Hz which troubles XF4 a lot.
-
-* Thu Sep 13 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-20mdk
-- snapshot with XFdrake fixes (G550 support, no DRI with Xinerama,
-  no XFree86 3.3.6 proposed wiht dual head).
-
-* Wed Sep 12 2001 dam's <damien@mandrakesoft.com> 1.1.7-19mdk
-- snapshot
-
-* Wed Sep 12 2001 dam's <damien@mandrakesoft.com> 1.1.7-18mdk
-- snapshot.
-
-* Mon Sep 10 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-17mdk
-- remove dependency on "perl" since pixel added Data::Dumper in perl-base
-
-* Mon Sep 10 2001 dam's <damien@mandrakesoft.com> 1.1.7-16mdk
-- new snapshot, bug corrections.
-
-* Thu Sep  6 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-15mdk
-- drakgw should be working now
-
-* Tue Sep 04 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-14mdk
-- snaphsot, better interaction with mcc (diskdrake printerdrake).
-
-* Tue Sep  4 2001 dam's <damien@mandrakesoft.com> 1.1.7-13mdk
-- snapshot.
-
-* Thu Aug 30 2001 dam's <damien@mandrakesoft.com> 1.1.7-12mdk
-- snapshot. locales corected, nicer wizards.
-
-* Thu Aug 30 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-11mdk
-- new snapshot, mousedrake fixes again.
-
-* Wed Aug 29 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.7-10mdk
-- new snapshot, mousedrake fixes.
-
-* Fri Aug 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-9mdk
-- snapshot for 8.1 beta2.
-
-* Fri Aug 24 2001 dam's <damien@mandrakesoft.com> 1.1.7-8mdk
-- bugfix.
-- new snapshot. mousedrake experimental.
-
-* Thu Aug 23 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.7-7mdk
-- fix drakboot bug
-- macros to fix some rpmlint warnings
-
-* Wed Aug 22 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-6mdk
-- put a require on "perl" which is needed for Data::Dumper in drakautoinst
-
-* Wed Aug 22 2001 dam's <damien@mandrakesoft.com> 1.1.7-5mdk
-- snapshot. draknet improvments, bug fixes.
-
-* Mon Aug 20 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-4mdk
-- new fstab munching code
-
-* Sat Aug 18 2001 Pixel <pixel@mandrakesoft.com> 1.1.7-3mdk
-- new diskdrake (with interactive version => newt)
-- drakxtools-http fix
-
-* Tue Aug 14 2001 dam's <damien@mandrakesoft.com> 1.1.7-2mdk
-- added doc (it's a shame...)
-
-* Tue Aug 14 2001 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.7-1mdk
-- add drakautoinst
-
-* Mon Aug 13 2001 dam's <damien@mandrakesoft.com> 1.1.6-3mdk
-- snapshot
-
-* Tue Aug  7 2001 dam's <damien@mandrakesoft.com> 1.1.6-2mdk
-- added draknet_splash pixmap
-
-* Tue Aug  7 2001 Pixel <pixel@mandrakesoft.com> 1.1.6-1mdk
-- add drakxtools_http
-
-* Fri Aug  3 2001 dam's <damien@mandrakesoft.com> 1.1.5-106mdk
-- added network/*.pm
-
-* Tue Jul 31 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-105mdk
-- add require perl-MDK-Common
-- fix for cp -rf (fuck FreeBSD (c))
-
-* Tue Jul 31 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-104mdk
-- fix my error: %%files with 2 times "-f <file>" doesn't work :-(
-
-* Mon Jul 30 2001 dam's <damien@mandrakesoft.com> 1.1.5-103mdk
-- updated with cooker install.
-- added require on XFree86-75dpi-fonts
-- merged with pixel specfile to handle mo.
-
-* Mon May  7 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-102mdk
-- updated bootloader.pm according to new lilo package (lilo-{menu,graphic,text})
-
-* Wed Apr 25 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-101mdk
-- updated with oem update for DrakX.
-- minor bug correction on printerdrake.
-- added minor features to XFdrake.
-
-* Wed Apr 18 2001 dam's <damien@mandrakesoft.com> 1.1.5-100mdk
-- added require on usermode.
-- added source 2 and 3.
-- snapshot. netconnect corrections. final package
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-99mdk
-- snapshot. mousedrake corrected. RC6
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-98mdk
-- snapshot. autologin corrected. RC5
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-97mdk
-- snapshot. RC4
-
-* Tue Apr 17 2001 dam's <damien@mandrakesoft.com> 1.1.5-96mdk
-- snapshot. RC3
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-95mdk
-- snapshot. RC2
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-94mdk
-- snapshot. RC
-
-* Mon Apr 16 2001 dam's <damien@mandrakesoft.com> 1.1.5-93mdk
-- draknet and tinyfirewall fixes
-
-* Sun Apr 15 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-92mdk
-- bootlook fix & layout
-
-* Fri Apr 13 2001 dam's <damien@mandrakesoft.com> 1.1.5-91mdk
-- snapshot
-
-* Fri Apr 13 2001 dam's <damien@mandrakesoft.com> 1.1.5-90mdk
-- snapshot
-
-* Thu Apr 12 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-89mdk
-- snapshot
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-88mdk
-- snapshot. pcmcia network corrected
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-87mdk
-- snapshot. Better network configuration
-
-* Thu Apr 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-86mdk
-- snapshot.
-
-* Wed Apr 11 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-85mdk
-- really fix printerdrake and snap.
-
-* Wed Apr 11 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-84mdk
-- fix printerdrake and snap.
-
-* Tue Apr 10 2001 dam's <damien@mandrakesoft.com> 1.1.5-83mdk
-- bug correction.
-
-* Mon Apr  9 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-82mdk
-- snap as always
-
-* Mon Apr  9 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-81mdk
-- snaphshot again and again
-
-* Mon Apr  9 2001 dam's <damien@mandrakesoft.com> 1.1.5-80mdk
-- snapshot. bug fix
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-79mdk
-- snapshot. bug fix.
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-78mdk
-- added require on XFree86-100dpi-fonts
-- various debugging
-- new tinyfirewall
-
-* Sun Apr  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-77mdk
-- snapshot
-- net_monitor added.
-
-* Fri Apr  6 2001 dam's <damien@mandrakesoft.com> 1.1.5-76mdk
-- corrected compilation error.
-
-* Fri Apr  6 2001 yves <yduret@mandrakesoft.com> 1.1.5-75mdk
-- snapshot : drakgw updated, boot config fix
-
-* Thu Apr  5 2001 dam's <damien@mandrakesoft.com> 1.1.5-74mdk
-- snapshot.
-
-* Mon Apr  2 2001 dam's <damien@mandrakesoft.com> 1.1.5-73mdk
-- snapshot.
-
-* Mon Apr  2 2001 dam's <damien@mandrakesoft.com> 1.1.5-72mdk
-- snapshot, typo fixs.
-
-* Fri Mar 30 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-71mdk
-- snapshot & fixes
-
-* Fri Mar 30 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-70mdk
-- snapshot : boot coonfig updated
-
-* Thu Mar 29 2001 dam's <damien@mandrakesoft.com> 1.1.5-69mdk
-- snapshot
-
-* Thu Mar 29 2001 dam's <damien@mandrakesoft.com> 1.1.5-68mdk
-- snapshot.
-
-* Thu Mar 29 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-67mdk
-- new snapshot (XFdrake should be working)
-
-* Wed Mar 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-66mdk
-- corrected tinyfirewall last step
-
-* Wed Mar 28 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-65mdk
-- fixed wrong generation of second mouse support
-
-* Wed Mar 28 2001 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-64mdk
-- fixed multi-mouse support for XF3
-- fixed XFdrake (read old config file before so probe overwrite)
-
-* Wed Mar 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-63mdk
-- added draksec embedded mode
-- corrected tinyfirewall for 2.4 kernels
-- corrected bad translations in draknet
-
-* Tue Mar 27 2001 dam's <damien@mandrakesoft.com> 1.1.5-62mdk
-- idem.
-
-* Sat Mar 24 2001 dam's <damien@mandrakesoft.com> 1.1.5-61mdk
-- corrected tinyfirewall
-
-* Fri Mar 23 2001 dam's <damien@mandrakesoft.com> 1.1.5-60mdk
-- snapshot
-- corrected require.
-
-* Fri Mar 23 2001 dam's <damien@mandrakesoft.com> 1.1.5-59mdk
-- added ldetect in require.
-- tinyfirewall included.
-
-* Thu Mar 22 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-58mdk
-- updated drakboot, new snapshot
-
-* Thu Mar 22 2001 dam's <damien@mandrakesoft.com> 1.1.5-57mdk
-- draknet without mail conf, new snapshot.
-
-* Thu Mar 22 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-56mdk
-- new version that will work with perl-base (at least XFdrake)
-
-* Thu Mar 22 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-55mdk
-- require perl-base not perl, it should be enough
-
-* Thu Mar 22 2001 dam's <damien@mandrakesoft.com> 1.1.5-54mdk
-- first release with tinyfirewall. Not stable.
-- corrected gmon pb, I suck.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-53mdk
-- corrected bad links.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-52mdk
-- no crash anymore.
-
-* Tue Mar 20 2001 dam's <damien@mandrakesoft.com> 1.1.5-51mdk
-- updated draknet. new snapshot.
-
-* Wed Mar 14 2001 dam's <damien@mandrakesoft.com> 1.1.5-50mdk
-- some minor label improvements.
-
-* Tue Mar 13 2001 Yves Duret <yduret@mandrakesoft.com> 1.1.5-49mdk
-- updated bootlook
-- macros
-
-* Mon Mar 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-48mdk
-- correted wizard pixmaps name
-
-* Mon Mar 12 2001 dam's <damien@mandrakesoft.com> 1.1.5-47mdk
-- new and shinny drakxservices
-
-* Tue Mar  6 2001 dam's <damien@mandrakesoft.com> 1.1.5-46mdk
-- XFdrake works + other improvements
-
-* Thu Mar  1 2001 dam's <damien@mandrakesoft.com> 1.1.5-45mdk
-- updated embedded mode.
-
-* Wed Feb 28 2001 dam's <damien@mandrakesoft.com> 1.1.5-44mdk
-- XFdrake : new look.
-- draknet : some corrections.
-- install : some improvements
-
-* Mon Feb 26 2001 dam's <damien@mandrakesoft.com> 1.1.5-43mdk
-- corrected draknet, and some other stuff
-
-* Mon Feb 26 2001 dam's <damien@mandrakesoft.com> 1.1.5-42mdk
-- new draknet, with wizard and profiles.
-- drakboot short-circuited.
-- new pixmaps policy.
-
-* Fri Feb 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-41mdk
-- require perl-GTK-GdkImlib, fix XFdrake and draknet with no perl-GTK
-
-* Fri Feb 23 2001 Pixel <pixel@mandrakesoft.com> 1.1.5-40mdk
-- split in drakxtools and drakxtools-newt
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-39mdk
-- install() and SHAR_PATH bug fixed in standalone.pm
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-38mdk
-- bug fix.
-
-* Thu Feb  8 2001 dam's <damien@mandrakesoft.com> 1.1.5-37mdk
-- bug correction inclusion.
-
-* Wed Feb  7 2001 dam's <damien@mandrakesoft.com> 1.1.5-36mdk
-- snapshot. Included embedded mode (for control-center), and wizard mode.
-
-* Mon Dec 18 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-35mdk
-- new version (lspcidrake not here anymore, requires ldetect-lst => don't
-include pcitable/... anymore)
-
-
-* Tue Nov 14 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-34mdk
-- snapshot
-- get rid of the rpmlib dependency
-
-* Sat Oct 21 2000 dam's <damien@mandrakesoft.com> 1.1.5-33mdk
-- RC1_fixed tagged cvs version.
-- Video cards handling enhanced
-- isa isdn-cards and non detected isdn pci-cards spported.
-
-* Thu Oct 19 2000 dam's <damien@mandrakesoft.com> 1.1.5-32mdk
-- snapshot.
-
-* Mon Oct  9 2000 dam's <damien@mandrakesoft.com> 1.1.5-31mdk
-- snapshot.
-
-* Fri Oct  6 2000 dam's <damien@mandrakesoft.com> 1.1.5-30mdk
-- snapshot.
-
-* Fri Oct  6 2000 dam's <damien@mandrakesoft.com> 1.1.5-29.1mdk
-- snapshot. not fully stable.
-
-* Thu Oct  5 2000 dam's <damien@mandrakesoft.com> 1.1.5-29mdk
-- snapshot.
-
-* Thu Oct 05 2000 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-28mdk
-- snapshot.
-
-* Tue Oct 03 2000 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.5-27mdk
-- snapshot.
-
-* Sun Oct  1 2000 dam's <damien@mandrakesoft.com> 1.1.5-26mdk
-- snapshot.
-
-* Sat Sep 30 2000 dam's <damien@mandrakesoft.com> 1.1.5-25mdk
-- snapshot.
-
-* Sat Sep 30 2000 dam's <damien@mandrakesoft.com> 1.1.5-24mdk
-- snapshot. draknet frozen.
-
-* Fri Sep 29 2000 dam's <damien@mandrakesoft.com> 1.1.5-23mdk
-- snapshot.
-
-* Thu Sep 28 2000 dam's <damien@mandrakesoft.com> 1.1.5-22mdk
-- modified spec.
-- snapshot
-- liveupdate
-
-* Wed Sep 27 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-21mdk
-- snapshot
-
-* Tue Sep 26 2000 dam's <damien@mandrakesoft.com> 1.1.5-20mdk
-- snapshot
-
-* Mon Sep 25 2000 dam's <damien@mandrakesoft.com> 1.1.5-19mdk
-- snapshot.
-
-* Fri Sep 22 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-18mdk
-- new snapshot
-- remove BuildRequires kudzu-devel, I suck bigtime..
-
-* Thu Sep 21 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-17mdk
-- new snapshot
-- BuildRequires kudzu-devel since ddcprobe/ddcxinfos.c uses /usr/include/vbe.h
-
-* Wed Sep 20 2000 dam's <damien@mandrakesoft.com> 1.1.5-16mdk
-- cvs snapshot. See changelog file
-
-* Wed Sep 20 2000 dam's <damien@mandrakesoft.com> 1.1.5-15mdk
-- cvs snapshot. See changelog file
-
-* Fri Sep 15 2000 dam's <damien@mandrakesoft.com> 1.1.5-14mdk
-- cvs snapshot.
-- draknet : better dsl configuration.
-
-* Thu Sep 14 2000 dam's <damien@mandrakesoft.com> 1.1.5-13mdk
-- cvs snapshot.
-- draknet : wizard mode. isdn_db.txt moved to /usr/share. No makedev.sh any more
-
-* Mon Sep 11 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-12mdk
-- add handling for gnome and kde2 in Xdrakres
-
-* Thu Sep  7 2000 dam's <damien@mandrakesoft.com> 1.1.5-11mdk
-- corrected draknet launch error.
-
-* Thu Sep  7 2000 dam's <damien@mandrakesoft.com> 1.1.5-10mdk
-- ISDN connection should work. test it!
-
-* Tue Sep  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-9mdk
-- setAutologin fixed in XFdrake
-
-* Tue Sep  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-8mdk
-- adduserdrake fixed
-
-* Sat Sep  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-7mdk
-- fix some typos in standalone/keyboarddrake
-- add require perl
-
-* Sat Sep  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.5-6mdk
-- add %%lang tags
-
-* Tue Aug 29 2000 dam's <damien@mandrakesoft.com> 1.1.5-5mdk
-- draknet : isa cards better recognized.
-
-* Mon Aug 28 2000 dam's <damien@mandrakesoft.com> 1.1.5-4mdk
-- corrected draknet. Please test it!
-
-* Sun Aug 27 2000 dam's <damien@mandrakesoft.com> 1.1.5-3mdk
-- Added draknet in standalone
-
-* Fri Aug 18 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-2mdk
-- add requires to modutils >= 2.3.11 because drakgw is reading
-  /etc/modules.conf which has been introduced in 2.3.11
-
-* Fri Aug 18 2000 Guillaume Cottenceau <gc@mandrakesoft.com> 1.1.5-1mdk
-- added `drakgw' in standalone (Internet Connection Sharing tool)
-
-* Fri Aug 11 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-3mdk
-- new snapshot
-
-* Thu Aug 10 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-2mdk
-- add noreplace for diskdrake.rc
-
-* Thu Aug 10 2000 Pixel <pixel@mandrakesoft.com> 1.1.4-1mdk
-- new snapshot
-
-* Mon Aug 07 2000 Frederic Lepied <flepied@mandrakesoft.com> 1.1.3-2mdk
-- automatically added BuildRequires
-
-* Fri Jul 21 2000 Pixel <pixel@mandrakesoft.com> 1.1.3-1mdk
-- new version, BM
-
-* Wed Jul 05 2000 Thierry Vignaud <tvignaud@mandrakesoft.com> 1.1.2-2mdk
-- build against new libbz2
-
-* Mon Jun 26 2000 Pixel <pixel@mandrakesoft.com> 1.1.2-1mdk
-- new version
-
-* Tue Jun 13 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-13mdk
-- hopefully fix XFdrake and DDR nvidia cards (silly xfree that is)
-
-* Mon Jun  5 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-12mdk
-- fix sbus missing
-
-* Sat Jun  3 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-10mdk
-- fix draksec calling init.sh instead of msec
-
-* Thu May 25 2000 Chmouel Boudjnah <chmouel@mandrakesoft.com> 1.1.1-9mdk
-- Don't display x86 stuff on drakboot when we are on others arch.
-
-* Thu May 25 2000 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.1-8mdk
-- update with first version for sparc and sparc64.
-- fix for printer configuration for SAMBA and NCP (security issue).
-
-* Tue May  9 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-7mdk
-- many small fixes (bis)
-
-* Tue May  2 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-6mdk
-- many small fixes
-
-* Wed Apr 26 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-5mdk
-- new version (fix in adduserdrake, enhance interactive_newt)
-
-* Wed Apr 19 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-4mdk
-- llseek works, not lseek64 :(  (need more testing)
-
-* Wed Apr 19 2000 Fran�ois Pons <fpons@mandrakesoft.com> 1.1.1-3mdk
-- updated with CVS of DrakX.
-
-* Fri Mar 31 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-2mdk
-- obsoletes setuptool, link setuptool to drakxconf
-
-* Fri Mar 31 2000 Pixel <pixel@mandrakesoft.com> 1.1.1-1mdk
-- new version (added drakboot for lilo/grub, XFdrake -xf4 for XFree4)
-
-* Sat Mar 25 2000 Pixel <pixel@mandrakesoft.com> 1.1-1mdk
-- new group
-- new version
-
-* Wed Jan 12 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- complete update with DrakX, small fixe on printerdrake again.
-
-* Wed Jan 12 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- corrected missing generic postscript and text driver for
-  printderdrake.
-
-* Wed Jan 12 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- corrected bad resolution setting in printerdrake.
-
-* Wed Jan 12 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- fixed print on STDOUT in printerdrake.
-- corrected printerdrake against not available drivers in gs.
-
-* Mon Jan 10 2000 Pixel <pixel@mandrakesoft.com>
-- new version (bis)
-- printerdrake install rhs-printfilters via urpmi if needed
-
-* Fri Jan 07 2000 Fran�ois PONS <fpons@mandrakesoft.com>
-- updated XFdrake and PrinterDrake.
-
-* Fri Jan  7 2000 Pixel <pixel@mandrakesoft.com>
-- fixed a bug causing no i18n for rpmdrake
-- add require urpmi
-
-* Thu Jan  6 2000 Pixel <pixel@mandrakesoft.com>
-- fix an error case in XFdrake
-
-* Tue Jan  4 2000 Pixel <pixel@mandrakesoft.com>
-- adduserdrake accept user names on command line
-- minor fixes
-
-* Fri Dec 31 1999 Pixel <pixel@mandrakesoft.com>
-- 32mdk
-
-* Wed Dec 29 1999 Pixel <pixel@mandrakesoft.com>
-- make rpmlint happier
-- minor fixes
-
-* Mon Dec 27 1999 Pixel <pixel@mandrakesoft.com>
-- better XFdrake and minor fixes
-
-* Fri Dec 24 1999 Pixel <pixel@mandrakesoft.com>
-- new version (better adduserdrake and more)
-- add /usr/bin/* (for lspcidrake)
-
-* Wed Dec 22 1999 Pixel <pixel@mandrakesoft.com>
-- do not try display :0 if DISPLAY is unset
-
-* Mon Dec 20 1999 Pixel <pixel@mandrakesoft.com>
-- fixed a bug in drakxservices
-- XFdrake now install XFree86 and XFree86-75dpi-fonts if needed
-- XFdrake now calls /etc/rc.d/init.d/xfs start if needed
-- minor fix
-
-* Sat Dec 18 1999 Pixel <pixel@mandrakesoft.com>
-- added kpackage's icons for rpmdrake
-
-* Thu Dec 16 1999 Pixel <pixel@mandrakesoft.com>
-- bzip2 .po's
-- mount /proc in XFdrake to avoid freeze when called by kudzu
-- added Xdrakres
-
-* Thu Dec 16 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Remove the netdrake ghost.
-
-* Thu Dec 16 1999 Pixel <pixel@mandrakesoft.com>
-- fix draksec
-- many changes in libDrakX
-
-* Sat Dec 11 1999 Pixel <pixel@mandrakesoft.com>
-- adduserdrake added and some more
-
-* Thu Dec  9 1999 Pixel <pixel@linux-mandrake.com>
-- added drakxconf, drakxservices
-- handle non root via kdesu if X
-- warning go to syslog
-
-* Wed Dec  8 1999 Chmouel Boudjnah <chmouel@mandrakesoft.com>
-- Add %post and %postun to link redhat tools to our tools.
-- Obsoletes: Xconfigurator mouseconfig kbdconfig printtool
-- A lots of changes/fix.
-
-* Thu Dec  2 1999 Pixel <pixel@linux-mandrake.com>
-- keyboarddrake added, and many changes
-- fixed typos
-
-* Fri Nov 26 1999 Pixel <pixel@linux-mandrake.com>
-- new version (printerdrake) (did i say lspcidrake was there too?)
-
-* Wed Nov 24 1999 Pixel <pixel@linux-mandrake.com>
-- new version
-- fixed *.o bundled in the %source
-
-* Sun Nov 21 1999 Pixel <pixel@mandrakesoft.com>
-- removed %config for diskdrake.rc (should i?)
-- removed xtest from the requires
-- added %config for diskdrake.rc (should i?)
-- strip .so and ddcxinfos (nice rpmlint :)
-
-* Sat Nov 20 1999 Pixel <pixel@mandrakesoft.com>
-- added MonitorsDB to %files (silly me:-!)
-
-* Thu Nov 18 1999 Pixel <pixel@mandrakesoft.com>
-- precised the required version for perl-GTK
-
-* Thu Nov 18 1999 Pixel <pixel@mandrakesoft.com>
-- First version
-
-
-# end of file
diff --git a/perl-install/fs.pm b/perl-install/fs.pm
deleted file mode 100644
index 1d16a3e9c..000000000
--- a/perl-install/fs.pm
+++ /dev/null
@@ -1,676 +0,0 @@
-package fs; # $Id$
-
-use diagnostics;
-use strict;
-
-use MDK::Common::System;
-use MDK::Common::Various;
-use common;
-use log;
-use devices;
-use fs::type;
-use fs::get;
-use fs::format;
-use fs::mount_options;
-use run_program;
-use detect_devices;
-use modules;
-use fsedit;
-use loopback;
-
-
-sub read_fstab {
-    my ($prefix, $file, @reading_options) = @_;
-
-    if (member('keep_default', @reading_options)) {
-	push @reading_options, 'freq_passno', 'keep_devfs_name', 'keep_device_LABEL';
-    }
-
-    my %comments;
-    my $comment;
-    my @l = grep {
-	if (/^Filename\s*Type\s*Size/) {
-	    0; #- when reading /proc/swaps
-	} elsif (/^\s*#/) {
-	    $comment .= chomp_($_) . "\n";
-	    0;
-	} else {
-	    $comments{$_} = $comment if $comment;
-	    $comment = '';
-	    1;
-	}
-    } cat_("$prefix$file");
-
-    #- attach comments at the end of fstab to the previous line
-    $comments{$l[-1]} = $comment if $comment;
-
-    map {
-	my ($dev, $mntpoint, $fs_type, $options, $freq, $passno) = split;
-	my $comment = $comments{$_};
-
-	$options = 'defaults' if $options eq 'rw'; # clean-up for mtab read
-
-	if ($fs_type eq 'supermount') {
-	    # normalize this bloody supermount
-	    $options = join(",", 'supermount', grep {
-		if (/fs=(.*)/) {
-		    $fs_type = $1;
-		    0;
-		} elsif (/dev=(.*)/) {
-		    $dev = $1;
-		    0;
-		} elsif ($_ eq '--') {
-		    0;
-		} else {
-		    1;
-		}
-	    } split(',', $options));
-	} elsif ($fs_type eq 'smb') {
-	    # prefering type "smbfs" over "smb"
-	    $fs_type = 'smbfs';
-	}
-	s/\\040/ /g foreach $mntpoint, $dev, $options;
-
-	my $h = { 
-		 mntpoint => $mntpoint, fs_type => $fs_type,
-		 options => $options, comment => $comment,
-		 if_(member('keep_freq_passno', @reading_options), freq => $freq, passno => $passno),
-		};
-
-	put_in_hash($h, subpart_from_wild_device_name($dev));
-
-	if ($h->{device_LABEL} && member('keep_device_LABEL', @reading_options)) {
-	    $h->{prefer_device_LABEL} = 1;
-        } elsif ($h->{devfs_device} && member('keep_devfs_name', @reading_options)) {
-	    $h->{prefer_devfs_name} = 1;
-	}
-
-	if ($h->{options} =~ /credentials=/ && !member('verbatim_credentials', @reading_options)) {
-	    require network::smb;
-	    #- remove credentials=file with username=foo,password=bar,domain=zoo
-	    #- the other way is done in fstab_to_string
-	    my ($options, $unknown) = fs::mount_options::unpack($h);
-	    my $file = delete $options->{'credentials='};
-	    my $credentials = network::smb::read_credentials_raw($file);
-	    if ($credentials->{username}) {
-		$options->{"$_="} = $credentials->{$_} foreach qw(username password domain);
-		fs::mount_options::pack($h, $options, $unknown);
-	    }
-	}
-
-	$h;
-    } @l;
-}
-
-sub merge_fstabs {
-    my ($loose, $fstab, @l) = @_;
-
-    foreach my $p (@$fstab) {
-	my ($l1, $l2) = partition { fsedit::is_same_hd($_, $p) } @l;
-	my ($p2) = @$l1 or next;
-	@l = @$l2;
-
-	$p->{mntpoint} = $p2->{mntpoint} if delete $p->{unsafeMntpoint};
-
-	$p->{fs_type} = $p2->{fs_type} if $p2->{fs_type} && !$loose;
-	$p->{options} = $p2->{options} if $p2->{options} && !$loose;
-	#- important to get isMounted property else DrakX may try to mount already mounted partitions :-(
-	add2hash($p, $p2);
-	$p->{device_alias} ||= $p2->{device_alias} || $p2->{device} if $p->{device} ne $p2->{device} && $p2->{device} !~ m|/|;
-
-	$p->{fs_type} && $p2->{fs_type} && $p->{fs_type} ne $p2->{fs_type}
-	  && $p->{fs_type} ne 'auto' && $p2->{fs_type} ne 'auto' and
-	    log::l("err, fstab and partition table do not agree for $p->{device} type: $p->{fs_type} vs $p2->{fs_type}");
-    }
-    @l;
-}
-
-sub analyze_wild_device_name {
-    my ($dev) = @_;
-
-    if ($dev =~ m!^/u?dev/(.*)!) {
-	'dev', $dev;
-    } elsif ($dev !~ m!^/! && (-e "/dev/$dev" || -e "$::prefix/dev/$dev")) {
-	'dev', "/dev/$dev";
-    } elsif ($dev =~ /^LABEL=(.*)/) {
-	'label', $1;
-    } elsif ($dev eq 'none' || $dev eq 'rootfs') {
-	'virtual';
-    } elsif ($dev =~ m!^(\S+):/\w!) {
-	'nfs';
-    } elsif ($dev =~ m!^//\w!) {
-	'smb';
-    } elsif ($dev =~ m!^http://!) {
-	'dav';
-    }
-}
-
-sub subpart_from_wild_device_name {
-    my ($dev) = @_;
-
-    my $part = { device => $dev, faked_device => 1 }; #- default
-
-    if (my ($kind, $val) = analyze_wild_device_name($dev)) {
-	if ($kind eq 'label') {	    
-	    $part->{device_LABEL} = $val;
-	} elsif ($kind eq 'dev') {
-	    my %part = (faked_device => 0);
-	    if (my $rdev = (stat "$::prefix$dev")[6]) {
-		($part{major}, $part{minor}) = unmakedev($rdev);
-	    }
-
-	    my $symlink = readlink("$::prefix$dev");
-	    $dev =~ s!/u?dev/!!;
-
-	    if ($symlink && $symlink =~ m|^[^/]+$|) {
-		$part{device_alias} = $dev;
-		$dev = $symlink;
-	    }
-
-	    if (my (undef, $part_number) = $dev =~ m!/(disc|part(\d+))$!) {
-		$part{part_number} = $part_number if $part_number;
-		$part{devfs_device} = $dev;
-	    } else {
-		my $part_number = devices::part_number(\%part);
-		$part{part_number} = $part_number if $part_number;
-	    }
-	    $part{device} = $dev;
-	    return \%part;
-	}
-    } else {
-	if ($dev =~ m!^/! && -f "$::prefix$dev") {
-	    #- it must be a loopback file or directory to bind
-	} else {
-	    log::l("part_from_wild_device_name: unknown device $dev");
-	}
-    }
-    $part;
-}
-
-sub part2wild_device_name {
-    my ($prefix, $part) = @_;
-
-    if ($part->{prefer_device_LABEL}) {
-	'LABEL=' . $part->{device_LABEL};
-    } elsif ($part->{prefer_devfs_name}) {
-	"/dev/$part->{devfs_device}";
-    } elsif ($part->{device_alias}) {
-	"/dev/$part->{device_alias}";
-    } else {
-	my $faked_device = exists $part->{faked_device} ? 
-	    $part->{faked_device} : 
-	    do {
-		#- in case $part has been created without using subpart_from_wild_device_name()
-		my ($kind) = analyze_wild_device_name($part->{device});
-		$kind ? $kind ne 'dev' : $part->{device} =~ m!^/!;
-	    };
-	if ($faked_device) {
-	    $part->{device};
-	} elsif ($part->{device} =~ m!^/dev/!) {
-	    log::l("ERROR: i have a full device $part->{device}, this should not happen. use subpart_from_wild_device_name() instead of creating bad part data-structures!");
-	    $part->{device};
-	} else {
-	    my $dev = "/dev/$part->{device}";
-	    eval { devices::make("$prefix$dev") };
-	    $dev;
-	}
-    }
-}
-
-sub add2all_hds {
-    my ($all_hds, @l) = @_;
-
-    @l = merge_fstabs('', [ fs::get::really_all_fstab($all_hds) ], @l);
-
-    foreach (@l) {
-	my $s = 
-	    $_->{fs_type} eq 'nfs' ? 'nfss' :
-	    $_->{fs_type} eq 'smbfs' ? 'smbs' :
-	    $_->{fs_type} eq 'davfs' ? 'davs' :
-	    isTrueLocalFS($_) || isSwap($_) || isOtherAvailableFS($_) ? '' :
-	    'special';
-	push @{$all_hds->{$s}}, $_ if $s;
-    }
-}
-
-sub get_major_minor {
-    eval {
-	my (undef, $major, $minor) = devices::entry($_->{device});
-	($_->{major}, $_->{minor}) = ($major, $minor);
-    } foreach @_;
-}
-
-sub merge_info_from_mtab {
-    my ($fstab) = @_;
-
-    my @l1 = map { my $l = $_; 
-		   my $h = fs::type::fs_type2subpart('swap');
-		   $h->{$_} = $l->{$_} foreach qw(device major minor); 
-		   $h;
-	       } read_fstab('', '/proc/swaps');
-    
-    my @l2 = map { read_fstab('', $_) } '/etc/mtab', '/proc/mounts';
-
-    foreach (@l1, @l2) {
-	log::l("found mounted partition on $_->{device} with $_->{mntpoint}");
-	if ($::isInstall && $_->{mntpoint} =~ m!/tmp/(image|hdimage)!) {
-	    $_->{real_mntpoint} = delete $_->{mntpoint};
-	    if ($_->{real_mntpoint} eq '/tmp/hdimage') {
-		log::l("found hdimage on $_->{device}");
-		$_->{mntpoint} = "/mnt/hd"; #- remap for hd install.
-	    }
-	}
-	$_->{isMounted} = 1;
-	set_isFormatted($_, 1);
-	delete $_->{options};
-    } 
-    merge_fstabs('loose', $fstab, @l1, @l2);
-}
-
-# - when using "$loose", it does not merge in type&options from the fstab
-sub merge_info_from_fstab {
-    my ($fstab, $prefix, $uniq, $loose) = @_;
-
-    my @l = grep { 
-	if ($uniq) {
-	    my $part = fs::get::mntpoint2part($_->{mntpoint}, $fstab);
-	    !$part || fsedit::is_same_hd($part, $_); #- keep it only if it is the mountpoint AND the same device
-	} else {
-	    1;
-	}
-    } read_fstab($prefix, '/etc/fstab', 'keep_default');
-
-    merge_fstabs($loose, $fstab, @l);
-}
-
-sub get_info_from_fstab {
-    my ($all_hds) = @_;
-    my @l = read_fstab($::prefix, '/etc/fstab', 'keep_default');
-    add2all_hds($all_hds, @l);
-}
-
-sub prepare_write_fstab {
-    my ($fstab, $o_prefix, $b_keep_smb_credentials) = @_;
-    $o_prefix ||= '';
-
-    my %new;
-    my @smb_credentials;
-    my @l = map { 
-	my $device = 
-	  isLoopback($_) ? 
-	      ($_->{mntpoint} eq '/' ? "/initrd/loopfs" : $_->{loopback_device}{mntpoint}) . $_->{loopback_file} :
-	  part2wild_device_name($o_prefix, $_);
-
-	my $real_mntpoint = $_->{mntpoint} || ${{ '/tmp/hdimage' => '/mnt/hd' }}{$_->{real_mntpoint}};
-	mkdir_p("$o_prefix$real_mntpoint") if $real_mntpoint =~ m|^/|;
-	my $mntpoint = loopback::carryRootLoopback($_) ? '/initrd/loopfs' : $real_mntpoint;
-
-	my ($freq, $passno) =
-	  exists $_->{freq} ?
-	    ($_->{freq}, $_->{passno}) :
-	  isTrueLocalFS($_) && $_->{options} !~ /encryption=/ && (!$_->{is_removable} || member($_->{mntpoint}, fs::type::directories_needed_to_boot())) ? 
-	    (1, $_->{mntpoint} eq '/' ? 1 : loopback::carryRootLoopback($_) ? 0 : 2) : 
-	    (0, 0);
-
-	if (($device eq 'none' || !$new{$device}) && ($mntpoint eq 'swap' || !$new{$mntpoint})) {
-	    #- keep in mind the new line for fstab.
-	    $new{$device} = 1;
-	    $new{$mntpoint} = 1;
-
-	    my $options = $_->{options};
-
-	    if ($_->{fs_type} eq 'smbfs' && $options =~ /password=/ && !$b_keep_smb_credentials) {
-		require network::smb;
-		if (my ($opts, $smb_credentials) = network::smb::fstab_entry_to_credentials($_)) {
-		    $options = $opts;
-		    push @smb_credentials, $smb_credentials;
-		}
-	    }
-
-	    my $fs_type = $_->{fs_type} || 'auto';
-
-	    s/ /\\040/g foreach $mntpoint, $device, $options;
-
-	    # handle bloody supermount special case
-	    if ($options =~ /supermount/) {
-		my @l = grep { $_ ne 'supermount' } split(',', $options);
-		my ($l1, $l2) = partition { member($_, 'ro', 'exec') } @l;
-		$options = join(",", "dev=$device", "fs=$fs_type", @$l1, if_(@$l2, '--', @$l2));
-		($device, $fs_type) = ('none', 'supermount');
-	    } else {
-		#- if we were using supermount, the type could be something like ext2:vfat
-		#- but this can not be done without supermount, so switching to "auto"
-		$fs_type = 'auto' if $fs_type =~ /:/;
-	    }
-
-	    my $file_dep = $options =~ /\b(loop|bind)\b/ ? $device : '';
-
-	    [ $file_dep, $mntpoint, $_->{comment} . join(' ', $device, $mntpoint, $fs_type, $options || 'defaults', $freq, $passno) . "\n" ];
-	} else {
-	    ();
-	}
-    } grep { $_->{device} && ($_->{mntpoint} || $_->{real_mntpoint}) && $_->{fs_type} && ($_->{isFormatted} || !$_->{notFormatted}) } @$fstab;
-
-    sub sort_it {
-	my (@l) = @_;
-
-	if (my $file_based = find { $_->[0] } @l) {
-	    my ($before, $other) = partition { $file_based->[0] =~ /^\Q$_->[1]/ } @l;
-	    $file_based->[0] = ''; #- all dependencies are now in before
-	    if (@$other && @$before) {
-		sort_it(@$before), sort_it(@$other);
-	    } else {
-		sort_it(@l);
-	    }
-	} else {
-	    sort { $a->[1] cmp $b->[1] } @l;
-	}	
-    }
-    @l = sort_it(@l);
-
-    join('', map { $_->[2] } @l), \@smb_credentials;
-}
-
-sub fstab_to_string {
-    my ($all_hds, $o_prefix) = @_;
-    my $fstab = [ fs::get::really_all_fstab($all_hds), @{$all_hds->{special}} ];
-    my ($s, undef) = prepare_write_fstab($fstab, $o_prefix, 'keep_smb_credentials');
-    $s;
-}
-
-sub write_fstab {
-    my ($all_hds, $o_prefix) = @_;
-    log::l("writing $o_prefix/etc/fstab");
-    my $fstab = [ fs::get::really_all_fstab($all_hds), @{$all_hds->{special}} ];
-    my ($s, $smb_credentials) = prepare_write_fstab($fstab, $o_prefix, '');
-    output("$o_prefix/etc/fstab", $s);
-    network::smb::save_credentials($_) foreach @$smb_credentials;
-}
-
-sub auto_fs() {
-    grep { chop; $_ && !/nodev/ } cat_("/etc/filesystems");
-}
-
-sub set_removable_mntpoints {
-    my ($all_hds) = @_;
-
-    my %names;
-    foreach (@{$all_hds->{raw_hds}}) {
-	my $name = detect_devices::suggest_mount_point($_) or next;
-	$name eq 'zip' and next;
-	
-	my $s = ++$names{$name};
-	$_->{mntpoint} ||= "/mnt/$name" . ($s == 1 ? '' : $s);
-    }
-}
-
-sub get_raw_hds {
-    my ($prefix, $all_hds) = @_;
-
-    push @{$all_hds->{raw_hds}}, detect_devices::removables();
-    $_->{is_removable} = 1 foreach @{$all_hds->{raw_hds}};
-
-    get_major_minor(@{$all_hds->{raw_hds}});
-
-    my @fstab = read_fstab($prefix, '/etc/fstab', 'keep_default');
-    $all_hds->{nfss} = [ grep { $_->{fs_type} eq 'nfs' } @fstab ];
-    $all_hds->{smbs} = [ grep { $_->{fs_type} eq 'smbfs' } @fstab ];
-    $all_hds->{davs} = [ grep { $_->{fs_type} eq 'davfs' } @fstab ];
-    $all_hds->{special} = [
-       (grep { $_->{fs_type} eq 'tmpfs' } @fstab),
-       { device => 'none', mntpoint => '/proc', fs_type => 'proc' },
-    ];
-}
-
-
-################################################################################
-# mounting functions
-################################################################################
-sub set_loop {
-    my ($part) = @_;
-    $part->{real_device} ||= devices::set_loop(devices::make($part->{device}), $part->{encrypt_key}, $part->{options} =~ /encryption=(\w+)/);
-}
-
-sub swapon {
-    my ($dev) = @_;
-    log::l("swapon called with $dev");
-    syscall_('swapon', devices::make($dev), 0) or die "swapon($dev) failed: $!";
-}
-
-sub swapoff {
-    my ($dev) = @_;
-    syscall_('swapoff', devices::make($dev)) or die "swapoff($dev) failed: $!";
-}
-
-sub formatMount_part {
-    my ($part, $raids, $fstab, $prefix, $wait_message) = @_;
-
-    if (isLoopback($part)) {
-	formatMount_part($part->{loopback_device}, $raids, $fstab, $prefix, $wait_message);
-    }
-    if (my $p = fs::get::up_mount_point($part->{mntpoint}, $fstab)) {
-	formatMount_part($p, $raids, $fstab, $prefix, $wait_message) unless loopback::carryRootLoopback($part);
-    }
-    if ($part->{toFormat}) {
-	fs::format::part($raids, $part, $prefix, $wait_message);
-    }
-    mount_part($part, $prefix, 0, $wait_message);
-}
-
-sub formatMount_all {
-    my ($raids, $fstab, $prefix, $wait_message) = @_;
-    formatMount_part($_, $raids, $fstab, $prefix, $wait_message) 
-      foreach sort { isLoopback($a) ? 1 : isSwap($a) ? -1 : 0 } grep { $_->{mntpoint} } @$fstab;
-
-    #- ensure the link is there
-    loopback::carryRootCreateSymlink($_, $prefix) foreach @$fstab;
-
-    #- for fun :)
-    #- that way, when install exits via ctrl-c, it gives hand to partition
-    eval {
-	my ($_type, $major, $minor) = devices::entry(fs::get::root($fstab)->{device});
-	output "/proc/sys/kernel/real-root-dev", makedev($major, $minor);
-    };
-}
-
-sub mount {
-    my ($dev, $where, $fs, $b_rdonly, $o_options, $o_wait_message) = @_;
-    log::l("mounting $dev on $where as type $fs, options $o_options");
-
-    -d $where or mkdir_p($where);
-
-    $fs or log::l("not mounting $dev partition"), return;
-
-    my @fs_modules = qw(ext3 hfs jfs ntfs romfs reiserfs ufs xfs vfat);
-
-    if (member($fs, 'smb', 'smbfs', 'nfs', 'davfs') && $::isStandalone || $::move) {
-	$o_wait_message->(N("Mounting partition %s", $dev)) if $o_wait_message;
-	system('mount', '-t', $fs, $dev, $where, if_($o_options, '-o', $o_options)) == 0 or die N("mounting partition %s in directory %s failed", $dev, $where);
-    } else {
-	my @types = ('ext2', 'proc', 'sysfs', 'usbfs', 'usbdevfs', 'iso9660', 'devfs', 'devpts', @fs_modules);
-
-	member($fs, @types) or log::l("skipping mounting $dev partition ($fs)"), return;
-
-	$where =~ s|/$||;
-
-	my $flag = c::MS_MGC_VAL();
-	$flag |= c::MS_RDONLY() if $b_rdonly;
-	my $mount_opt = "";
-
-	if ($fs eq 'vfat') {
-	    $mount_opt = 'check=relaxed';
-	} elsif ($fs eq 'reiserfs') {
-	    #- could be better if we knew if there is a /boot or not
-	    #- without knowing it, / is forced to be mounted with notail
-	    # if $where =~ m|/(boot)?$|;
-	    $mount_opt = 'notail'; #- notail in any case
-	} elsif ($fs eq 'jfs' && !$b_rdonly) {
-	    $o_wait_message->(N("Checking %s", $dev)) if $o_wait_message;
-	    #- needed if the system is dirty otherwise mounting read-write simply fails
-	    run_program::raw({ timeout => 60 * 60 }, "fsck.jfs", $dev) or do {
-		my $err = $?;
-		die "fsck.jfs failed" if $err & 0xfc00;
-	    };
-	} elsif ($fs eq 'ext2' && !$b_rdonly) {
-		$o_wait_message->(N("Checking %s", $dev)) if $o_wait_message;
-		foreach ('-a', '-y') {
-		    run_program::raw({ timeout => 60 * 60 }, "fsck.ext2", $_, $dev);
-		    my $err = $?;
-		    if ($err & 0x0100) {
-			log::l("fsck corrected partition $dev");
-		    }
-		    if ($err & 0xfeff) {
-			my $txt = sprintf("fsck failed on %s with exit code %d or signal %d", $dev, $err >> 8, $err & 255);
-			$_ eq '-y' ? die($txt) : cdie($txt);
-		    } else {
-			last;
-		    }
-		}
-	}
-	if (member($fs, @fs_modules)) {
-	    eval { modules::load($fs) };
-	} elsif ($fs eq 'iso9660') {
-	    eval { modules::load('isofs') };
-	}
-	log::l("calling mount($dev, $where, $fs, $flag, $mount_opt)");
-	$o_wait_message->(N("Mounting partition %s", $dev)) if $o_wait_message;
-	syscall_('mount', $dev, $where, $fs, $flag, $mount_opt) or die N("mounting partition %s in directory %s failed", $dev, $where) . " ($!)";
-    
-        eval { #- fail silently, /etc may be read-only
-	    append_to_file("/etc/mtab", "$dev $where $fs defaults 0 0\n");
-	};
-    }
-}
-
-#- takes the mount point to umount (can also be the device)
-sub umount {
-    my ($mntpoint) = @_;
-    $mntpoint =~ s|/$||;
-    log::l("calling umount($mntpoint)");
-
-    syscall_('umount2', $mntpoint, 0) or do {
-	kill 15, fuzzy_pidofs('^fam\b');
-	syscall_('umount2', $mntpoint, 0) or die N("error unmounting %s: %s", $mntpoint, $!);
-    };
-
-    substInFile { $_ = '' if /(^|\s)$mntpoint\s/ } '/etc/mtab'; #- do not care about error, if we can not read, we will not manage to write... (and mess mtab)
-}
-
-sub mount_part {
-    my ($part, $o_prefix, $b_rdonly, $o_wait_message) = @_;
-
-    #- root carrier's link can not be mounted
-    loopback::carryRootCreateSymlink($part, $o_prefix);
-
-    log::l("isMounted=$part->{isMounted}, real_mntpoint=$part->{real_mntpoint}, mntpoint=$part->{mntpoint}");
-    if ($part->{isMounted} && $part->{real_mntpoint} && $part->{mntpoint}) {
-	log::l("remounting partition on $o_prefix$part->{mntpoint} instead of $part->{real_mntpoint}");
-	if ($::isInstall) { #- ensure partition will not be busy.
-	    require install_any;
-	    install_any::getFile('XXX');
-	}
-	eval {
-	    umount($part->{real_mntpoint});
-	    rmdir $part->{real_mntpoint};
-	    symlinkf "$o_prefix$part->{mntpoint}", $part->{real_mntpoint};
-	    delete $part->{real_mntpoint};
-	    $part->{isMounted} = 0;
-	};
-    }
-
-    return if $part->{isMounted};
-
-    unless ($::testing) {
-	if (isSwap($part)) {
-	    $o_wait_message->(N("Enabling swap partition %s", $part->{device})) if $o_wait_message;
-	    swapon($part->{device});
-	} else {
-	    $part->{mntpoint} or die "missing mount point for partition $part->{device}";
-
-	    my $mntpoint = ($o_prefix || '') . $part->{mntpoint};
-	    if (isLoopback($part) || $part->{encrypt_key}) {
-		set_loop($part);
-	    } elsif ($part->{options} =~ /encrypted/) {
-		log::l("skip mounting $part->{device} since we do not have the encrypt_key");
-		return;
-	    } elsif (loopback::carryRootLoopback($part)) {
-		$mntpoint = "/initrd/loopfs";
-	    }
-	    my $dev = $part->{real_device} || part2wild_device_name('', $part);
-	    mount($dev, $mntpoint, $part->{fs_type}, $b_rdonly, $part->{options}, $o_wait_message);
-	    rmdir "$mntpoint/lost+found";
-	}
-    }
-    $part->{isMounted} = 1;
-    set_isFormatted($part, 1); #- assume that if mount works, partition is formatted
-}
-
-sub umount_part {
-    my ($part, $o_prefix) = @_;
-
-    $part->{isMounted} || $part->{real_mntpoint} or return;
-
-    unless ($::testing) {
-	if (isSwap($part)) {
-	    swapoff($part->{device});
-	} elsif (loopback::carryRootLoopback($part)) {
-	    umount("/initrd/loopfs");
-	} else {
-	    umount(($o_prefix || '') . $part->{mntpoint} || devices::make($part->{device}));
-	    devices::del_loop(delete $part->{real_device}) if $part->{real_device};
-	}
-    }
-    $part->{isMounted} = 0;
-}
-
-sub umount_all($;$) {
-    my ($fstab, $prefix) = @_;
-
-    log::l("unmounting all filesystems");
-
-    foreach (sort { $b->{mntpoint} cmp $a->{mntpoint} } @$fstab) {
-	$_->{mntpoint} and umount_part($_, $prefix);
-    }
-}
-
-################################################################################
-# various functions
-################################################################################
-sub df {
-    my ($part, $o_prefix) = @_;
-    my $dir = "/tmp/tmp_fs_df";
-
-    return $part->{free} if exists $part->{free};
-
-    if ($part->{isMounted}) {
-	$dir = ($o_prefix || '') . $part->{mntpoint};
-    } elsif ($part->{notFormatted} && !$part->{isFormatted}) {
-	return; #- will not even try!
-    } else {
-	mkdir_p($dir);
-	eval { mount(devices::make($part->{device}), $dir, $part->{fs_type}, 'readonly') };
-	if ($@) {
-	    set_isFormatted($part, 0);
-	    unlink $dir;
-	    return;
-	}
-    }
-    my (undef, $free) = MDK::Common::System::df($dir);
-
-    if (!$part->{isMounted}) {
-	umount($dir);
-	unlink($dir);
-    }
-
-    $part->{free} = 2 * $free if defined $free;
-    $part->{free};
-}
-
-sub mount_usbfs {
-    my ($prefix) = @_;
-    
-    my $fs = cat_('/proc/filesystems') =~ /usbfs/ ? 'usbfs' : 'usbdevfs';
-    mount('none', "$prefix/proc/bus/usb", $fs);
-}
-
-1;
diff --git a/perl-install/fs/format.pm b/perl-install/fs/format.pm
deleted file mode 100644
index 1b7b977cd..000000000
--- a/perl-install/fs/format.pm
+++ /dev/null
@@ -1,151 +0,0 @@
-package fs::format; # $Id$
-
-use diagnostics;
-use strict;
-
-use run_program;
-use common;
-use fs::type;
-use log;
-
-my %cmds = (
-    ext2     => [ 'e2fsprogs', 'mke2fs', '-F' ],
-    ext3     => [ 'e2fsprogs', 'mke2fs', '-F', '-j' ],
-    reiserfs => [ 'reiserfsprogs', 'mkreiserfs', '-ff' ],
-    xfs      => [ 'xfsprogs', 'mkfs.xfs', '-f', '-q' ],
-    jfs      => [ 'jfsprogs', 'mkfs.jfs', '-f' ],
-    hfs      => [ 'hfsutils', 'hformat' ],
-    dos      => [ 'dosfstools', 'mkdosfs' ],
-    vfat     => [ 'dosfstools', 'mkdosfs', '-F', '32' ],
-    swap     => [ 'util-linux', 'mkswap' ],
-);
-
-sub package_needed_for_partition_type {
-    my ($part) = @_;
-    my $l = $cmds{$part->{fs_type}} or return;
-    $l->[0];
-}
-
-sub known_type {
-    my ($part) = @_;
-    to_bool($cmds{$part->{fs_type}});
-}
-
-sub check_package_is_installed {
-    my ($do_pkgs, $fs_type) = @_;
-
-    my ($pkg, $binary) = @{$cmds{$fs_type} || return};
-    $do_pkgs->ensure_binary_is_installed($pkg, $binary);
-}
-
-sub part {
-    my ($raids, $part, $prefix, $wait_message) = @_;
-    if (isRAID($part)) {
-	$wait_message->(N("Formatting partition %s", $part->{device})) if $wait_message;
-	require raid;
-	raid::format_part($raids, $part);
-    } elsif (isLoopback($part)) {
-	$wait_message->(N("Creating and formatting file %s", $part->{loopback_file})) if $wait_message;
-	loopback::format_part($part, $prefix);
-    } else {
-	$wait_message->(N("Formatting partition %s", $part->{device})) if $wait_message;
-	part_raw($part, $wait_message);
-    }
-}
-
-sub part_raw {
-    my ($part, $wait_message) = @_;
-
-    $part->{isFormatted} and return;
-
-    if ($part->{encrypt_key}) {
-	require fs;
-	fs::set_loop($part);
-    }
-
-    my $dev = $part->{real_device} || $part->{device};
-
-    my @options = if_($part->{toFormatCheck}, "-c");
-    log::l("formatting device $dev (type $part->{fs_type})");
-
-    my $fs_type = $part->{fs_type};
-
-    if ($fs_type eq 'ext2' || $fs_type eq 'ext3') {
-	push @options, "-m", "0" if $part->{mntpoint} =~ m|^/home|;
-    } elsif (isDos($part)) {
-	$fs_type = 'dos';
-    } elsif ($fs_type eq 'hfs') {
-        push @options, '-l', "Untitled";
-    } elsif (isAppleBootstrap($part)) {
-	push @options, '-l', 'bootstrap';
-    }
-
-    my ($_pkg, $cmd, @first_options) = @{$cmds{$fs_type} || die N("I do not know how to format %s in type %s", $part->{device}, $part->{fs_type})};
-
-    my @args = ($cmd, @first_options, @options, devices::make($dev));
-
-    if ($cmd eq 'mke2fs' && $wait_message) {
-	mke2fs($wait_message, @args) or die N("%s formatting of %s failed", $fs_type, $dev);
-    } else {
-	run_program::raw({ timeout => 60 * 60 }, @args) or die N("%s formatting of %s failed", $fs_type, $dev);
-    }
-
-    if ($fs_type eq 'ext3') {
-	disable_forced_fsck($dev);
-    }
-
-    set_isFormatted($part, 1);
-}
-
-sub mke2fs {
-    my ($wait_message, @args) = @_;
-
-    open(my $F, "@args |");
-
-    local $/ = "\b";
-    local $_;
-    while (<$F>) {
-	#- even if it still takes some time when format is over, we don't want the progress bar to stay at 85%
-	$wait_message->('', $1, $2) if m!^\s*(\d+)/(\d+)\b!;
-    }
-    return close($F);
-}
-
-sub disable_forced_fsck {
-    my ($dev) = @_;
-    run_program::run("tune2fs", "-c0", "-i0", devices::make($dev));
-}
-
-sub wait_message {
-    my ($in) = @_;
-
-    my ($w, $progress, $last_msg, $displayed);
-    my $on_expose = sub { $displayed = 1; 0 }; #- declared here to workaround perl limitation
-    $w, sub {
-	my ($msg, $current, $total) = @_;
-	if ($msg) {
-	    $last_msg = $msg;
-	    if (!$w) {
-		$progress = Gtk2::ProgressBar->new if $in->isa('interactive::gtk');
-		$w = $in->wait_message('', [ '', if_($progress, $progress) ]);
-		if ($progress) {
-		    #- don't show by default, only if we are given progress information
-		    $progress->hide;
-		    $progress->signal_connect(expose_event => $on_expose);
-		}
-	    }
-	    $w->set($msg);
-	} elsif ($total) {
-	    if ($progress) {
-		$progress->set_fraction($current / $total);
-		$progress->show;
-		$displayed = 0;
-		mygtk2::flush() while !$displayed;
-	    } else {
-		$w->set([ $last_msg, "$current / $total" ]);
-	    }
-	}
-    };
-}
-
-1;
diff --git a/perl-install/fs/get.pm b/perl-install/fs/get.pm
deleted file mode 100644
index 6b982c1e9..000000000
--- a/perl-install/fs/get.pm
+++ /dev/null
@@ -1,128 +0,0 @@
-package fs::get; # $Id$
-
-use diagnostics;
-use strict;
-
-use partition_table;
-use fs::type;
-use fs;
-use common;
-use log;
-
-sub empty_all_hds() {
-    { hds => [], lvms => [], raids => [], loopbacks => [], raw_hds => [], nfss => [], smbs => [], davs => [], special => [] };
-}
-sub fstab {
-    my ($all_hds) = @_;
-    my @parts = map { partition_table::get_normal_parts($_) } hds($all_hds);
-    @parts, @{$all_hds->{raids}}, @{$all_hds->{loopbacks}};
-}
-sub really_all_fstab {
-    my ($all_hds) = @_;
-    my @l = fstab($all_hds);
-    @l, @{$all_hds->{raw_hds}}, @{$all_hds->{nfss}}, @{$all_hds->{smbs}}, @{$all_hds->{davs}};
-}
-
-sub fstab_and_holes {
-    my ($all_hds) = @_;
-    hds_fstab_and_holes(hds($all_hds)), @{$all_hds->{raids}}, @{$all_hds->{loopbacks}};
-}
-
-sub holes {
-    my ($all_hds) = @_;
-    grep { isEmpty($_) } fstab_and_holes($all_hds);
-}
-sub hds_holes {
-    grep { isEmpty($_) } hds_fstab_and_holes(@_);
-}
-sub free_space {
-    my ($all_hds) = @_;
-    sum map { $_->{size} } holes($all_hds);
-}
-sub hds_free_space {
-    sum map { $_->{size} } hds_holes(@_);
-}
-
-sub hds {
-    my ($all_hds) = @_;
-    (@{$all_hds->{hds}}, @{$all_hds->{lvms}});
-}
-
-#- get all normal partition including special ones as found on sparc.
-sub hds_fstab {
-    map { partition_table::get_normal_parts($_) } @_;
-}
-
-sub hds_fstab_and_holes {
-    map {
-	if (isLVM($_)) {
-	    my @parts = partition_table::get_normal_parts($_);
-	    my $free = $_->{totalsectors} - sum map { $_->{size} } @parts;
-	    my $free_part = { start => 0, size => $free, pt_type => 0, rootDevice => $_->{VG_name} };
-	    @parts, if_($free >= $_->cylinder_size, $free_part);
-	} else {
-	    partition_table::get_normal_parts_and_holes($_);
-	}
-    } @_;
-}
-
-
-sub device2part {
-    my ($dev, $fstab) = @_;
-    my $subpart = fs::subpart_from_wild_device_name($dev);
-    my $part = find { fsedit::is_same_hd($subpart, $_) } @$fstab;
-    log::l("fs::get::device2part: unknown device <<$dev>>") if !$part;
-    $part;
-}
-
-sub part2hd {
-    my ($part, $all_hds) = @_;
-    my $hd = find { $part->{rootDevice} eq ($_->{device} || $_->{VG_name}) } hds($all_hds);
-    $hd;
-}
-
-sub file2part {
-    my ($fstab, $file, $b_keep_simple_symlinks) = @_;    
-    my $part;
-
-    $file = $b_keep_simple_symlinks ? common::expand_symlinks_but_simple("$::prefix$file") : expand_symlinks("$::prefix$file");
-    unless ($file =~ s/^$::prefix//) {
-	my $part = find { loopback::carryRootLoopback($_) } @$fstab or die;
-	log::l("found $part->{mntpoint}");
-	$file =~ s|/initrd/loopfs|$part->{mntpoint}|;
-    }
-    foreach (@$fstab) {
-	my $m = $_->{mntpoint};
-	$part = $_ if 
-	  $file =~ /^\Q$m/ && 
-	    (!$part || length $part->{mntpoint} < length $m);
-    }
-    $part or die "file2part: not found $file";
-    $file =~ s|$part->{mntpoint}/?|/|;
-    ($part, $file);
-}
-
-sub mntpoint2part {
-    my ($mntpoint, $fstab) = @_;
-    find { $mntpoint eq $_->{mntpoint} } @$fstab;
-}
-sub has_mntpoint {
-    my ($mntpoint, $all_hds) = @_;
-    mntpoint2part($mntpoint, [ really_all_fstab($all_hds) ]);
-}
-sub root_ {
-    my ($fstab, $o_boot) = @_;
-    $o_boot && mntpoint2part("/boot", $fstab) || mntpoint2part("/", $fstab);
-}
-sub root { &root_ || {} }
-
-sub up_mount_point {
-    my ($mntpoint, $fstab) = @_;
-    while (1) {
-	$mntpoint = dirname($mntpoint);
-	$mntpoint ne "." or return;
-	$_->{mntpoint} eq $mntpoint and return $_ foreach @$fstab;
-    }
-}
-
-1;
diff --git a/perl-install/fs/mount_options.pm b/perl-install/fs/mount_options.pm
deleted file mode 100644
index f59a083f7..000000000
--- a/perl-install/fs/mount_options.pm
+++ /dev/null
@@ -1,263 +0,0 @@
-package fs::mount_options; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use fs::type;
-use log;
-
-sub list() {
-    my %non_defaults = (
-			sync => 'async', noatime => 'atime', noauto => 'auto', ro => 'rw', 
-			user => 'nouser', nodev => 'dev', noexec => 'exec', nosuid => 'suid',
-		       );
-    my @user_implies = qw(noexec nodev nosuid);
-    \%non_defaults, \@user_implies;
-}
-
-sub unpack {
-    my ($part) = @_;
-    my $packed_options = $part->{options};
-
-    my ($non_defaults, $user_implies) = list();
-
-    my @auto_fs = fs::auto_fs();
-    my %per_fs = (
-		  iso9660 => [ qw(unhide) ],
-		  vfat => [ qw(umask=0 umask=0022) ],
-		  ntfs => [ qw(umask=0 umask=0022) ],
-		  nfs => [ qw(rsize=8192 wsize=8192) ],
-		  smbfs => [ qw(username= password=) ],
-		  davfs => [ qw(username= password= uid= gid=) ],
-		  reiserfs => [ 'notail' ],
-		 );
-    push @{$per_fs{$_}}, 'usrquota', 'grpquota' foreach 'ext2', 'ext3', 'xfs';
-
-    while (my ($fs, $l) = each %per_fs) {
-	$part->{fs_type} eq $fs || $part->{fs_type} eq 'auto' && member($fs, @auto_fs) or next;
-	$non_defaults->{$_} = 1 foreach @$l;
-    }
-
-    $non_defaults->{encrypted} = 1 if !$part->{isFormatted} || isSwap($part);
-
-    $non_defaults->{supermount} = 1 if $part->{fs_type} =~ /:/ || member($part->{fs_type}, 'auto', @auto_fs);
-
-    my $defaults = { reverse %$non_defaults };
-    my %options = map { $_ => '' } keys %$non_defaults;
-    my @unknown;
-    foreach (split(",", $packed_options)) {
-	if ($_ eq 'user') {
-	    $options{$_} = 1 foreach 'user', @$user_implies;
-	} elsif (exists $non_defaults->{$_}) {
-	    $options{$_} = 1;
-	} elsif ($defaults->{$_}) {
-	    $options{$defaults->{$_}} = 0;
-	} elsif (/(.*?=)(.*)/) {
-	    $options{$1} = $2;
-	} else {
-	    push @unknown, $_;
-	}
-    }
-    # merge those, for cleaner help
-    $options{'rsize=8192,wsize=8192'} = delete $options{'rsize=8192'} && delete $options{'wsize=8192'}
-      if exists $options{'rsize=8192'};
-
-    my $unknown = join(",", @unknown);
-    \%options, $unknown;
-}
-
-sub pack_ {
-    my ($_part, $options, $unknown) = @_;
-
-    my ($non_defaults, $user_implies) = list();
-    my @l;
-
-    my @umasks = map {
-	if (/^umask=/) {
-	    my $v = delete $options->{$_};
-	    /^umask=(.+)/ ? if_($v, $1) : $v;
-	} else { () }
-    } keys %$options;
-    if (@umasks) {
-	push @l, 'umask=' . min(@umasks);
-    }
-
-    if (delete $options->{user}) {
-	push @l, 'user';
-	foreach (@$user_implies) {
-	    if (!delete $options->{$_}) {
-		# overriding
-		$options->{$non_defaults->{$_}} = 1;
-	    }
-	}
-    }
-    push @l, map_each { if_($::b, $::a =~ /=$/ ? "$::a$::b" : $::a) } %$options;
-    push @l, $unknown;
-
-    join(",", uniq(grep { $_ } @l));
-}
-sub pack {
-    my ($part, $options, $unknown) = @_;
-    $part->{options} = pack_($part, $options, $unknown);
-    noreturn();
-}
-
-# update me on each util-linux new release:
-sub help() {
-    (
-
-	'grpquota' => '',
-
-	'noatime' => N("Do not update inode access times on this file system
-(e.g, for faster access on the news spool to speed up news servers)."),
-
-	'noauto' => N("Can only be mounted explicitly (i.e.,
-the -a option will not cause the file system to be mounted)."),
-
-	'nodev' => N("Do not interpret character or block special devices on the file system."),
-
-	'noexec' => N("Do not allow execution of any binaries on the mounted
-file system. This option might be useful for a server that has file systems
-containing binaries for architectures other than its own."),
-
-	'nosuid' => N("Do not allow set-user-identifier or set-group-identifier
-bits to take effect. (This seems safe, but is in fact rather unsafe if you
-have suidperl(1) installed.)"),
-
-	'ro' => N("Mount the file system read-only."),
-
-	'sync' => N("All I/O to the file system should be done synchronously."),
-
-	'supermount' => '',
-
-	'user' => N("Allow an ordinary user to mount the file system. The
-name of the mounting user is written to mtab so that he can unmount the file
-system again. This option implies the options noexec, nosuid, and nodev
-(unless overridden by subsequent options, as in the option line
-user,exec,dev,suid )."),
-
-	'usrquota' => '',
-
-        'umask=0' => N("Give write access to ordinary users"),
-
-        'umask=0022' => N("Give read-only access to ordinary users"),
-    );
-}
-
-
-sub rationalize {
-    my ($part) = @_;
-
-    my ($options, $unknown) = &unpack($part);
-
-    if ($part->{fs_type} ne 'reiserfs') {
-	$options->{notail} = 0;
-    }
-    if (!fs::type::can_be_one_of_those_fs_types($part, 'vfat', 'smbfs', 'iso9660', 'udf')) {
-	delete $options->{'codepage='};
-    }
-    if (member($part->{mntpoint}, fs::type::directories_needed_to_boot())) {
-	foreach (qw(users user noauto supermount)) {
-	    if ($options->{$_}) {
-		$options->{$_} = 0;
-		$options->{$_} = 0 foreach qw(nodev noexec nosuid);
-	    }
-	}
-    }
-
-    &pack($part, $options, $unknown);
-}
-
-sub set_default {
-    my ($part, %opts) = @_;
-    #- opts are: useSupermount security iocharset codepage ignore_is_removable
-
-    my ($options, $unknown) = &unpack($part);
-
-    if (!$opts{ignore_is_removable} && $part->{is_removable} 
-	  && !member($part->{mntpoint}, fs::type::directories_needed_to_boot()) 
-	  && (!$part->{fs_type} || $part->{fs_type} eq 'auto' || $part->{fs_type} =~ /:/)) {
-	$options->{supermount} = $opts{useSupermount} && !($opts{useSupermount} eq 'magicdev' && $part->{media_type} eq 'cdrom');
-	$part->{fs_type} = !$options->{supermount} ? 'auto' :
-		    $part->{media_type} eq 'cdrom' ? 'udf:iso9660' : 'ext2:vfat';
-	$options->{sync} = 1 if $part->{media_type} ne 'cdrom';
-    }
-
-    if ($part->{media_type} eq 'cdrom') {
-	$options->{ro} = 1;
-    }
-
-    if ($part->{media_type} eq 'fd') {
-	# slow device so do not loose time, write now!
-	$options->{sync} = 1;
-    }
-
-    if (isTrueFS($part)) {
-	#- noatime on laptops (do not wake up the hd)
-	#- Do  not  update  inode  access times on this
-	#- file system (e.g, for faster access  on  the
-	#- news spool to speed up news servers).
-	$options->{noatime} = detect_devices::isLaptop();
-    }
-    if ($part->{fs_type} eq 'nfs') {
-	put_in_hash($options, { 
-			       nosuid => 1, 'rsize=8192,wsize=8192' => 1, soft => 1,
-			      });
-    }
-    if ($part->{fs_type} eq 'smbfs') {
-	add2hash($options, { 'username=' => '%' }) if !$options->{'credentials='};
-    }
-    if (fs::type::can_be_this_fs_type($part, 'vfat')) {
-
-	put_in_hash($options, {
-			       users => 1, noexec => 0,
-			      }) if $part->{is_removable};
-
-	put_in_hash($options, {
-			       'umask=0' => $opts{security} < 3, 'umask=0022' => $opts{security} < 4,
-			       'iocharset=' => $opts{iocharset}, 'codepage=' => $opts{codepage},
-			      });
-    }
-    if ($part->{fs_type} eq 'ntfs') {
-	put_in_hash($options, { ro => 1, 'nls=' => $opts{iocharset},
-				'umask=0' => $opts{security} < 3, 'umask=0022' => $opts{security} < 4,
-			      });
-    }
-    if (fs::type::can_be_this_fs_type($part, 'iso9660')) {
-	put_in_hash($options, { user => 1, noexec => 0, 'iocharset=' => $opts{iocharset} });
-    }
-    if ($part->{fs_type} eq 'reiserfs') {
-	$options->{notail} = 1;
-    }
-    if (isLoopback($part) && !isSwap($part)) { #- no need for loop option for swap files
-	$options->{loop} = 1;
-    }
-
-    # rationalize: no need for user
-    if ($options->{autofs} || $options->{supermount}) {
-	$options->{users} = $options->{user} = 0;
-    }
-
-    if ($options->{user} || $options->{users}) {
-        # have noauto when we have user
-        $options->{noauto} = 1;
-	# ensure security  (user_implies - noexec as noexec is not a security matter)
-	$options->{$_} = 1 foreach 'nodev', 'nosuid';
-    }
-
-    &pack($part, $options, $unknown);
-
-    rationalize($part);
-}
-
-sub set_all_default {
-    my ($all_hds, %opts) = @_;
-    #- opts are: useSupermount security iocharset codepage
-
-    foreach my $part (fs::get::really_all_fstab($all_hds)) {
-	set_default($part, %opts);
-    }
-}
-
-1;
diff --git a/perl-install/fs/type.pm b/perl-install/fs/type.pm
deleted file mode 100644
index 5fcc7facc..000000000
--- a/perl-install/fs/type.pm
+++ /dev/null
@@ -1,378 +0,0 @@
-package fs::type; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-
-our @ISA = qw(Exporter);
-our @EXPORT = qw(
-   isEmpty isExtended isTrueLocalFS isTrueFS isDos isSwap isOtherAvailableFS isRawLVM isRawRAID isRAID isLVM isMountableRW isNonMountable isPartOfLVM isPartOfRAID isPartOfLoopback isLoopback isMounted isBusy isSpecial isApple isAppleBootstrap isWholedisk isHiddenMacPart isFat_or_NTFS
-   maybeFormatted set_isFormatted
-);
-
-
-my (%type_name2pt_type, %type_name2fs_type, %fs_type2pt_type, %pt_type2fs_type, %type_names);
-
-{
-    my @list_types = (
-	important => [
-  0x82 => 'swap',     'Linux swap',
-  0x83 => 'ext2',     'Linux native',
-  0x83 => 'ext3',     'Journalised FS: ext3',
-  0x83 => 'reiserfs', 'Journalised FS: ReiserFS',
-if_(arch() =~ /ppc|i.86|ia64|x86_64/, 
-  0x83 => 'xfs',      'Journalised FS: XFS',
-),
-if_(arch() =~ /ppc|i.86/, 
-  0x83 => 'jfs',      'Journalised FS: JFS',
-),
-if_(arch() =~ /i.86|ia64|x86_64/,
-  0x0b => 'vfat',     'FAT32',
-),
-if_(arch() =~ /ppc/,
-  0x401	=> '',         'Apple Bootstrap',
-  0x402	=> 'hfs',      'Apple HFS Partition',
-  0x41  => '',         'PPC PReP Boot',
-),
-	],
-
-        less_important => [
-  0x8e => '',         'Linux Logical Volume Manager',
-  0xfd => '',         'Linux RAID',
-	],
-
-	special => [
-  0x0  => '',         'Empty',
-  0x05 => '',         'Extended',
-  0x0f => '',         'W95 Extended (LBA)',
-  0x85 => '',         'Linux extended',
-	],
-
-        backward_compatibility => [
-  0x183 => 'reiserfs', 'reiserfs (deprecated)',
-  0x283 => 'xfs',      'xfs (deprecated)',
-  0x383 => 'jfs',      'jfs (deprecated)',
-  0x483 => 'ext3',     'ext3 (deprecated)',
-	],
-
-	other => [
- if_(arch() =~ /^ia64/,
-  0x100 => '',         'Various',
-), if_(arch() =~ /^ppc/,
-  0x401	=> 'apple',    'Apple Partition',
-), if_(arch() =~ /^sparc/,
-  0x01 => 'ufs',      'SunOS boot',
-  0x02 => 'ufs',      'SunOS root',
-  0x03 => '',      'SunOS swap',
-  0x04 => 'ufs',      'SunOS usr',
-  0x05 => '',      'Whole disk',
-  0x06 => 'ufs',      'SunOS stand',
-  0x07 => 'ufs',      'SunOS var',
-  0x08 => 'ufs',      'SunOS home',
-), if_(arch() =~ /^i.86|x86_64/,
-  0x01 => 'vfat',     'FAT12',
-  0x02 => '',         'XENIX root',
-  0x03 => '',         'XENIX usr',
-  0x04 => 'vfat',     'FAT16 <32M',
-  0x06 => 'vfat',     'FAT16',
-  0x07 => (arch() =~ /^ppc/ ? 'hpfs' : 'ntfs'), 'NTFS (or HPFS)',
-  0x08 => '',         'AIX',
-),
-  0x09 => '',         'AIX bootable',
-  0x0a => '',         'OS/2 Boot Manager',
-  0x0c => 'vfat',     'W95 FAT32 (LBA)',
-  0x0e => 'vfat',     'W95 FAT16 (LBA)',
-  0x10 => '',         'OPUS',
-  0x11 => '',         'Hidden FAT12',
-  0x12 => '',         'Compaq diagnostics',
-  0x14 => '',         'Hidden FAT16 <32M',
-  0x16 => '',         'Hidden FAT16',
-  0x17 => 'ntfs',     'Hidden HPFS/NTFS',
-  0x18 => '',         'AST SmartSleep',
-  0x1b => 'vfat',     'Hidden W95 FAT32',
-  0x1c => 'vfat',     'Hidden W95 FAT32 (LBA)',
-  0x1e => 'vfat',     'Hidden W95 FAT16 (LBA)',
-  0x24 => '',         'NEC DOS',
-  0x39 => '',         'Plan 9',
-  0x3c => '',         'PartitionMagic recovery',
-  0x40 => '',         'Venix 80286',
-if_(arch() !~ /ppc/,
-  0x41 => '',         'PPC PReP Boot',
-),
-  0x42 => '',         'SFS',
-  0x4d => '',         'QNX4.x',
-  0x4e => '',         'QNX4.x 2nd part',
-  0x4f => '',         'QNX4.x 3rd part',
-  0x50 => '',         'OnTrack DM',
-  0x51 => '',         'OnTrack DM6 Aux1',
-  0x52 => '',         'CP/M',
-  0x53 => '',         'OnTrack DM6 Aux3',
-  0x54 => '',         'OnTrackDM6',
-  0x55 => '',         'EZ-Drive',
-  0x56 => '',         'Golden Bow',
-  0x5c => '',         'Priam Edisk',
-  0x61 => '',         'SpeedStor',
-  0x63 => '',         'GNU HURD or SysV',
-  0x64 => '',         'Novell Netware 286',
-  0x65 => '',         'Novell Netware 386',
-  0x70 => '',         'DiskSecure Multi-Boot',
-  0x75 => '',         'PC/IX',
-  0x80 => '',         'Old Minix',
-  0x81 => '',         'Minix / old Linux',
-  0x84 => '',         'OS/2 hidden C: drive',
-  0x86 => '',         'NTFS volume set',
-  0x87 => '',         'NTFS volume set ',
-  0x93 => '',         'Amoeba',
-  0x94 => '',         'Amoeba BBT',
-  0x9f => '',         'BSD/OS',
-  0xa0 => '',         'IBM Thinkpad hibernation',
-  0xa5 => '',         'FreeBSD',
-  0xa6 => '',         'OpenBSD',
-  0xa7 => '',         'NeXTSTEP',
-  0xa8 => '',         'Darwin UFS',
-  0xa9 => '',         'NetBSD',
-  0xab => '',         'Darwin boot',
-  0xb7 => '',         'BSDI fs',
-  0xb8 => '',         'BSDI swap',
-  0xbb => '',         'Boot Wizard hidden',
-  0xbe => '',         'Solaris boot',
-  0xbf => '',         'Microsoft XBox OS Partitions',
-  0xc1 => '',         'DRDOS/sec (FAT-12)',
-  0xc4 => '',         'DRDOS/sec (FAT-16 < 32M)',
-  0xc6 => '',         'DRDOS/sec (FAT-16)',
-  0xc7 => '',         'Syrinx',
-  0xda => '',         'Non-FS data',
-  0xdb => '',         'CP/M / CTOS / ...',
-  0xde => '',         'Dell Utility',
-  0xdf => '',         'BootIt',
-  0xe1 => '',         'SpeedStor (FAT-12)',
-  0xe3 => '',         'DOS R/O',
-  0xe4 => '',         'SpeedStor (FAT-16)',
-  0xeb => 'befs',     'BeOS fs',
-  0xee => '',         'EFI GPT',
-  0xef => 'vfat',     'EFI (FAT-12/16/32)',
-  0xf0 => '',         'Linux/PA-RISC boot',
-  0xf4 => '',         'SpeedStor (large part.)',
-  0xf2 => '',         'DOS secondary',
-  0xfe => '',         'LANstep',
-  0xff => '',         'BBT',
-	],
-    );
-
-    foreach (group_by2(@list_types)) {
-	my ($name, $l) = @$_;
-	for (my $i = 0; defined $l->[$i]; $i += 3) {
-	    my $pt_type   = $l->[$i];
-	    my $fs_type   = $l->[$i + 1];
-	    my $type_name = $l->[$i + 2];
-	    !exists $type_name2fs_type{$type_name} or internal_error("'$type_name' is not unique");
-	    $type_name2fs_type{$type_name} = $fs_type;
-	    $type_name2pt_type{$type_name} = $pt_type;
-
-	    $fs_type2pt_type{$fs_type} ||= $pt_type;
-	    $pt_type2fs_type{$pt_type} ||= $fs_type;
-	    push @{$type_names{$name}}, $type_name;
-	}
-    }
-}
-
-
-sub type_names() { 
-    my @l = @{$type_names{important}};
-    push @l, @{$type_names{less_important}}, sort @{$type_names{other}} if $::expert;
-    @l;
-}
-
-sub type_name2subpart {
-    my ($name) = @_;
-    exists $type_name2fs_type{$name} && 
-      { fs_type => $type_name2fs_type{$name}, pt_type => $type_name2pt_type{$name} };
-}
-
-sub part2type_name { 
-    my ($part) = @_;
-    my @names = keys %type_name2fs_type;
-   
-    my $pt_type = defined $part->{pt_type} ? $part->{pt_type} : $part->{fs_type} && $fs_type2pt_type{$part->{fs_type}};
-    if (defined $pt_type) {
-	@names = grep { $pt_type eq $type_name2pt_type{$_} } @names;
-    }
-    if (my $fs_type = $part->{fs_type} || $part->{pt_type} && $pt_type2fs_type{$part->{pt_type}}) {
-	@names = grep { $fs_type eq $type_name2fs_type{$_} } @names;
-    }
-    if (@names > 1) {
-	log::l("ERROR: (part2type_name) multiple match for $part->{pt_type} $part->{fs_type}");
-    }
-    first(@names);
-}
-sub type_name2pt_type { 
-    local ($_) = @_;
-    /0x(.*)/ ? hex $1 : $type_name2pt_type{$_} || $_;
-}
-
-
-sub pt_type2subpart {
-    my ($pt_type) = @_;
-    my $fs_type = $pt_type2fs_type{$pt_type};
-    { pt_type => $pt_type, if_($fs_type, fs_type => $fs_type) };
-}
-sub fs_type2subpart {
-    my ($fs_type) = @_;
-    my $pt_type = $fs_type2pt_type{$fs_type};
-    { fs_type => $fs_type, if_($pt_type, pt_type => $pt_type) };
-}
-sub set_fs_type {
-    my ($part, $fs_type) = @_;
-    put_in_hash($part, fs_type2subpart($fs_type));
-}
-sub set_pt_type {
-    my ($part, $pt_type) = @_;
-    put_in_hash($part, pt_type2subpart($pt_type));
-}
-sub suggest_fs_type {
-    my ($part, $fs_type) = @_;
-    set_fs_type($part, $fs_type) if !$part->{pt_type} && !$part->{fs_type};
-}
-sub set_type_subpart {
-    my ($part, $subpart) = @_;
-    if (exists $subpart->{pt_type} && exists $subpart->{fs_type}) {
-	$part->{fs_type} = $subpart->{fs_type};
-	$part->{pt_type} = $subpart->{pt_type};
-    } elsif (exists $subpart->{pt_type}) {
-	set_pt_type($part, $subpart->{pt_type});
-    } elsif (exists $subpart->{fs_type}) {
-	set_fs_type($part, $subpart->{fs_type});
-    } else {
-	log::l("ERROR: (set_type_subpart) subpart has no type");
-    }
-}
-
-
-my @partitions_signatures = (
-    (map { [ 'Linux Logical Volume Manager', 0x200 * $_ + 0x18, "LVM2" ] } 0 .. 3),
-    [ 'Linux Logical Volume Manager', 0, "HM\1\0" ],
-    [ 'ext2', 0x438, "\x53\xEF" ],
-    [ 'reiserfs', 0x10034, "ReIsErFs" ],
-    [ 'reiserfs', 0x10034, "ReIsEr2Fs" ],
-    [ 'xfs', 0, 'XFSB', 0x200, 'XAGF', 0x400, 'XAGI' ],
-    [ 'jfs', 0x8000, 'JFS1' ],
-    [ 'swap', 4086, "SWAP-SPACE" ],
-    [ 'swap', 4086, "SWAPSPACE2" ],
-    [ 'ntfs', 0x1FE, "\x55\xAA", 0x3, "NTFS" ],
-    [ 'FAT32',  0x1FE, "\x55\xAA", 0x52, "FAT32" ],
-if_(arch() !~ /^sparc/,
-    [ 'FAT16',  0x1FE, "\x55\xAA", 0x36, "FAT" ],
-    [ 'iso9660', 0x8001, "CD001" ],
-),
-);
-
-sub fs_type_from_magic {
-    my ($part) = @_;
-    if (exists $part->{fs_type_from_magic}) {
-	$part->{fs_type_from_magic};
-    } else {
-	my $type = type_subpart_from_magic($part);
-	$type && $type->{fs_type};
-    }
-}
-
-sub type_subpart_from_magic { 
-    my ($part) = @_;
-    my $dev = devices::make($part->{device});
-
-    my $check_md = sub {
-	my ($F) = @_;
-	my $MD_RESERVED_SECTORS = 128;
-	my $sector = round_down($part->{size}, $MD_RESERVED_SECTORS) - $MD_RESERVED_SECTORS; #- MD_NEW_SIZE_SECTORS($part->{size})
-	if (c::lseek_sector(fileno $F, $sector, 0)) {
-	    my $tmp;
-	    my $signature = "\xfc\x4e\x2b\xa9";
-	    sysread($F, $tmp, length $signature);
-	    $tmp eq $signature and return "Linux RAID";
-	}
-	'';
-    };
-    my $t = typeFromMagic($dev, 
-			  if_($part->{size}, $check_md),
-			  @partitions_signatures) or return;
-
-    my $p = type_name2subpart($t) || fs_type2subpart($t) || internal_error("unknown name/fs $t");
-    if ($p->{fs_type} eq 'ext2') {
-	#- there is no magic to differentiate ext3 and ext2. Using libext2fs
-	#- to check if it has a journal
-	$p->{fs_type} = 'ext3' if c::is_ext3($dev);
-    }
-    $part->{fs_type_from_magic} = $p->{fs_type};
-    $p;
-}
-
-sub true_local_fs_types() { qw(ext3 ext2 reiserfs xfs jfs) }
-
-sub isEmpty { !$_[0]{fs_type} && $_[0]{pt_type} == 0 }
-sub isEfi { arch() =~ /ia64/ && $_[0]{pt_type} == 0xef }
-sub isWholedisk { arch() =~ /^sparc/ && $_[0]{pt_type} == 5 }
-sub isExtended { arch() !~ /^sparc/ && ($_[0]{pt_type} == 5 || $_[0]{pt_type} == 0xf || $_[0]{pt_type} == 0x85) }
-sub isRawLVM { $_[0]{pt_type} == 0x8e }
-sub isRawRAID { $_[0]{pt_type} == 0xfd }
-sub isSwap { $_[0]{fs_type} eq 'swap' }
-sub isDos { arch() !~ /^sparc/ && ${{ 1 => 1, 4 => 1, 6 => 1 }}{$_[0]{pt_type}} }
-sub isFat_or_NTFS { member($_[0]{fs_type}, 'vfat', 'ntfs') }
-sub isApple { $_[0]{pt_type} == 0x401 && defined $_[0]{isDriver} }
-sub isAppleBootstrap { $_[0]{pt_type} == 0x401 && defined $_[0]{isBoot} }
-sub isHiddenMacPart { defined $_[0]{isMap} }
-
-sub isTrueFS { isTrueLocalFS($_[0]) || member($_[0]{fs_type}, qw(nfs)) }
-sub isTrueLocalFS { member($_[0]{fs_type}, true_local_fs_types()) }
-
-sub isOtherAvailableFS { isEfi($_[0]) || isFat_or_NTFS($_[0]) || member($_[0]{fs_type}, 'ufs', 'hfs', 'iso9660') } #- other OS that linux can access its filesystem
-sub isMountableRW { (isTrueFS($_[0]) || isOtherAvailableFS($_[0])) && $_[0]{fs_type} ne 'ntfs' }
-sub isNonMountable { 
-    my ($part) = @_;
-    isRawRAID($part) || isRawLVM($part) || $part->{fs_type} eq 'ntfs' && !$part->{isFormatted} && $part->{notFormatted};
-}
-
-sub isPartOfLVM { defined $_[0]{lvm} }
-sub isPartOfRAID { defined $_[0]{raid} }
-sub isPartOfLoopback { defined $_[0]{loopback} }
-sub isRAID { $_[0]{device} =~ /^md/ }
-sub isUBD { $_[0]{device} =~ /^ubd/ } #- should be always true during an $::uml_install
-sub isLVM { $_[0]{VG_name} || $_[0]{lv_name} }
-sub isLoopback { defined $_[0]{loopback_file} }
-sub isMounted { $_[0]{isMounted} }
-sub isBusy { isMounted($_[0]) || isPartOfRAID($_[0]) || isPartOfLVM($_[0]) || isPartOfLoopback($_[0]) }
-sub isSpecial { isRAID($_[0]) || isLVM($_[0]) || isLoopback($_[0]) || isUBD($_[0]) }
-
-sub can_be_this_fs_type {
-    my ($part, $fs_type) = @_;
-    can_be_one_of_those_fs_types($part, $fs_type);
-}
-sub can_be_one_of_those_fs_types {
-    my ($part, @fs_types) = @_;
-    $part->{fs_type} or return;
-    $part->{fs_type} eq 'auto' || listlength(intersection(\@fs_types, [ split(':', $part->{fs_type}) ]));
-}
-
-sub maybeFormatted { 
-    my ($part) = @_;
-    $part->{isFormatted} || !$part->{notFormatted} && !$part->{bad_fs_type_magic};
-}
-sub set_isFormatted {
-    my ($part, $val) = @_;
-    $part->{isFormatted} = $val;
-    $part->{notFormatted} = !$val;
-    delete $part->{bad_fs_type_magic};
-    delete $part->{fs_type_from_magic};
-}
-
-#- do this before modifying $part->{fs_type}
-sub check {
-    my ($fs_type, $_hd, $part) = @_;
-    $fs_type eq "jfs" && $part->{size} < 16 << 11 and die N("You can not use JFS for partitions smaller than 16MB");
-    $fs_type eq "reiserfs" && $part->{size} < 32 << 11 and die N("You can not use ReiserFS for partitions smaller than 32MB");
-}
-
-sub directories_needed_to_boot() { 
-    qw(/ /usr /var /boot /tmp);
-}
diff --git a/perl-install/fsedit.pm b/perl-install/fsedit.pm
deleted file mode 100644
index 6f28ff6fe..000000000
--- a/perl-install/fsedit.pm
+++ /dev/null
@@ -1,638 +0,0 @@
-package fsedit; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%suggestions);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table;
-use partition_table::raw;
-use fs::type;
-use detect_devices;
-use devices;
-use loopback;
-use log;
-use fs;
-
-%suggestions = (
-  N_("simple") => [
-    { mntpoint => "/",     size => 300 << 11, fs_type => 'ext3', ratio => 5, maxsize => 6000 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, fs_type => 'swap', ratio => 1, maxsize => 1100 << 11 },
-    { mntpoint => "/home", size => 300 << 11, fs_type => 'ext3', ratio => 3 },
-  ], N_("with /usr") => [
-    { mntpoint => "/",     size => 250 << 11, fs_type => 'ext3', ratio => 1, maxsize => 2000 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, fs_type => 'swap', ratio => 1, maxsize => 1100 << 11 },
-    { mntpoint => "/usr",  size => 300 << 11, fs_type => 'ext3', ratio => 4, maxsize => 4000 << 11 },
-    { mntpoint => "/home", size => 100 << 11, fs_type => 'ext3', ratio => 3 },
-  ], N_("server") => [
-    { mntpoint => "/",     size => 150 << 11, fs_type => 'ext3', ratio => 1, maxsize =>  800 << 11 },
-    { mntpoint => "swap",  size =>  64 << 11, fs_type => 'swap', ratio => 2, maxsize => 1600 << 11 },
-    { mntpoint => "/usr",  size => 300 << 11, fs_type => 'ext3', ratio => 4, maxsize => 4000 << 11 },
-    { mntpoint => "/var",  size => 200 << 11, fs_type => 'ext3', ratio => 3 },
-    { mntpoint => "/home", size => 150 << 11, fs_type => 'ext3', ratio => 3 },
-    { mntpoint => "/tmp",  size => 150 << 11, fs_type => 'ext3', ratio => 2, maxsize => 1000 << 11 },
-  ],
-);
-foreach (values %suggestions) {
-    if (arch() =~ /ia64/) {
-	@$_ = ({ mntpoint => "/boot/efi", size => 50 << 11, pt_type => 0xef, ratio => 1, maxsize => 150 << 11 }, @$_);
-    }
-}
-
-my @suggestions_mntpoints = (
-    "/var/ftp", "/var/www", "/boot", '/usr/local', '/opt',
-    arch() =~ /sparc/ ? "/mnt/sunos" : arch() =~ /ppc/ ? "/mnt/macos" : "/mnt/windows",
-);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub recompute_loopbacks {
-    my ($all_hds) = @_;
-    my @fstab = fs::get::fstab($all_hds);
-    @{$all_hds->{loopbacks}} = map { isPartOfLoopback($_) ? @{$_->{loopback}} : () } @fstab;
-}
-
-sub raids {
-    my ($hds) = @_;
-
-    my @parts = fs::get::hds_fstab(@$hds);
-
-    my @l = grep { isRawRAID($_) } @parts or return [];
-
-    log::l("looking for raids in " . join(' ', map { $_->{device} } @l));
-    
-    require raid;
-    raid::detect_during_install(@l) if $::isInstall;
-    raid::get_existing(@l);
-}
-
-sub lvms {
-    my ($all_hds) = @_;
-    my @pvs = grep { isRawLVM($_) } fs::get::fstab($all_hds) or return;
-
-    log::l("looking for vgs in " . join(' ', map { $_->{device} } @pvs));
-
-    #- otherwise vgscan will not find them
-    devices::make($_->{device}) foreach @pvs; 
-    require lvm;
-
-    my @lvms;
-    foreach (@pvs) {
-	my $name = lvm::get_vg($_) or next;
-	my $lvm = find { $_->{VG_name} eq $name } @lvms;
-	if (!$lvm) {
-	    $lvm = new lvm($name);
-	    lvm::update_size($lvm);
-	    lvm::get_lvs($lvm);
-	    push @lvms, $lvm;
-	}
-	$_->{lvm} = $name;
-	push @{$lvm->{disks}}, $_;
-    }
-    @lvms;
-}
-
-sub get_hds {
-    my ($o_flags, $o_in) = @_;
-    my $flags = $o_flags || {};
-    $flags->{readonly} && ($flags->{clearall} || $flags->{clear}) and die "conflicting flags readonly and clear/clearall";
-
-    my @drives = detect_devices::hds();
-
-    foreach my $hd (@drives) {
-	$hd->{file} = devices::make($hd->{device});
-	$hd->{prefix} ||= $hd->{device};
-    }
-
-    @drives = partition_table::raw::get_geometries(@drives);
-
-    my (@hds, @raw_hds);
-    foreach my $hd (@drives) {
-	$hd->{readonly} = $flags->{readonly};
-
-	eval { partition_table::raw::test_for_bad_drives($hd) if !$flags->{no_bad_drives} };
-	if (my $err = $@) {
-	    if ($err =~ /write error:/) { 
-		$hd->{readonly} = 1;
-	    } elsif ($err =~ /read error:/) {
-		next;
-	    } else {
-		$o_in and $o_in->ask_warn('', $err);
-		next;
-	    }
-	}
-
-	if ($flags->{clearall} || member($hd->{device}, @{$flags->{clear} || []})) {
-	    partition_table::raw::zero_MBR_and_dirty($hd);
-	} else {
-	    my $handle_die_and_cdie = sub {
-		if ($hd->{readonly}) {
-		    log::l("using /proc/partitions since diskdrake failed :(");
-		    use_proc_partitions($hd);
-		    1;
-		} elsif (my $type = fs::type::type_subpart_from_magic($hd)) {
-		    #- non partitioned drive?
-		    if (exists $hd->{usb_description} && $type->{fs_type}) {
-			#- USB keys
-			put_in_hash($hd, $type);
-			push @raw_hds, $hd;
-			$hd = '';
-			1;
-		    } elsif ($type->{pt_type} == 0x8e) {
-			#- LVM on full disk
-			my $part = { size => $hd->{totalsectors}, device => $hd->{device}, %$type };
-			bless $hd, 'partition_table::raw';
-			$hd->{readonly} = $hd->{getting_rid_of_readonly_allowed} = 1;
-			$hd->{primary}{normal} = [ $part ];
-			1;
-		    } else {
-			0;
-		    }
-		} else {
-		    0;
-		}
-	    };
-	    my $handled;
-	    eval {
-		catch_cdie {
-		    partition_table::read($hd);
-		    if (listlength(partition_table::get_normal_parts($hd)) == 0) {
-			$handled = 1 if $handle_die_and_cdie->();
-		    } else {
-			compare_with_proc_partitions($hd) if $::isInstall;
-		    }
-		} sub {
-		    my $err = $@;
-		    if ($handle_die_and_cdie->()) {
-			$handled = 1;
-			0; #- do not continue, transform cdie into die
-		    } else {
-			!$o_in || $o_in->ask_okcancel('', formatError($err));
-		    }
-		};
-	    };
-	    if (my $err = $@) {
-		if ($handled) {
-		    #- already handled in cdie handler above
-		} elsif ($handle_die_and_cdie->()) {
-		} elsif ($o_in && $o_in->ask_yesorno(N("Error"), 
-N("I can not read the partition table of device %s, it's too corrupted for me :(
-I can try to go on, erasing over bad partitions (ALL DATA will be lost!).
-The other solution is to not allow DrakX to modify the partition table.
-(the error is %s)
-
-Do you agree to lose all the partitions?
-", $hd->{device}, formatError($err)))) {
-		    partition_table::raw::zero_MBR($hd);
-		} else {
-		    #- using it readonly
-		    log::l("using /proc/partitions since diskdrake failed :(");
-		    use_proc_partitions($hd);
-		}
-	    }
-	    $hd or next;
-
-	    member($_->{device}, @{$flags->{clear} || []}) and partition_table::remove($hd, $_)
-	      foreach partition_table::get_normal_parts($hd);
-	}
-
-	my @parts = partition_table::get_normal_parts($hd);
-
-	# checking the magic of the filesystem, do not rely on pt_type
-	foreach (grep { member($_->{fs_type}, 'vfat', 'ntfs', 'ext2') || $_->{pt_type} == 0x100 } @parts) {
-	    if (my $type = fs::type::type_subpart_from_magic($_)) {
-                if ($type->{fs_type}) {
-                    #- keep {pt_type}
-		    $_->{fs_type} = $type->{fs_type};
-                } else {
-                    put_in_hash($_, $type); 
-                }
-	    } else {
-		$_->{bad_fs_type_magic} = 1;
-	    }
-	}
-	
-	foreach (@parts) {
-	    my $label =
-	      member($_->{fs_type}, qw(ext2 ext3)) ?
-		c::get_ext2_label(devices::make($_->{device})) :
-		'';
-	    $_->{device_LABEL} = $label if $label;
-	}
-
-	if ($hd->{usb_media_type}) {
-	    $_->{is_removable} = 1 foreach @parts;
-	}
-
-	push @hds, $hd;
-    }
-
-    #- detect raids before LVM allowing LVM on raid
-    my $raids = raids(\@hds);
-    my $all_hds = { %{ fs::get::empty_all_hds() }, hds => \@hds, raw_hds => \@raw_hds, lvms => [], raids => $raids };
-
-    $all_hds->{lvms} = [ lvms($all_hds) ];
-
-    fs::get_major_minor(fs::get::fstab($all_hds));
-
-    $all_hds;
-}
-
-sub read_proc_partitions {
-    my ($hds) = @_;
-
-    my @all = devices::read_proc_partitions_raw();
-    my ($parts, $disks) = partition { $_->{dev} =~ /\d$/ && $_->{dev} !~ /^(sr|scd)/ } @all;
-
-    my $devfs_like = any { $_->{dev} =~ m|/disc$| } @$disks;
-
-    my %devfs2normal = map {
-	my (undef, $major, $minor) = devices::entry($_->{device});
-	my $disk = find { $_->{major} == $major && $_->{minor} == $minor } @$disks;
-	$disk->{dev} => $_->{device};
-    } @$hds;
-
-    my $prev_part;
-    foreach my $part (@$parts) {
-	my $dev;
-	if ($devfs_like) {
-	    $dev = -e "/dev/$part->{dev}" ? $part->{dev} : sprintf("0x%x%02x", $part->{major}, $part->{minor});
-	    $part->{rootDevice} = $devfs2normal{dirname($part->{dev}) . '/disc'};
-	} else {
-	    $dev = $part->{dev};
-	    if (my $hd = find { $part->{dev} =~ /^\Q$_->{device}\E./ } @$hds) {
-		put_in_hash($part, partition_table::hd2minimal_part($hd));
-	    }
-	}
-	undef $prev_part if $prev_part && ($prev_part->{rootDevice} || '') ne ($part->{rootDevice} || '');
-
-	$part->{device} = $dev;
-	$part->{size} *= 2;	# from KB to sectors
-	$part->{start} = $prev_part ? $prev_part->{start} + $prev_part->{size} : 0;
-	put_in_hash($part, fs::type::type_subpart_from_magic($part));
-	$prev_part = $part;
-	delete $part->{dev}; # cleanup
-    }
-    @$parts;
-}
-
-sub is_same_hd {
-    my ($hd1, $hd2) = @_;
-    if ($hd1->{major} && $hd2->{major}) {
-	$hd1->{major} == $hd2->{major} && $hd1->{minor} == $hd2->{minor};
-    } elsif (my ($s1) = $hd1->{device} =~ m|https?://(.+?)/*$|) {
-	my ($s2) = $hd2->{device} =~ m|https?://(.+?)/*$|;
-	$s1 eq $s2;
-    } else {
-	$hd1->{devfs_device} && $hd2->{devfs_device} && $hd1->{devfs_device} eq $hd2->{devfs_device}
-	  || $hd1->{device_LABEL} && $hd2->{device_LABEL} && $hd1->{device_LABEL} eq $hd2->{device_LABEL}
-	  || $hd1->{device} && $hd2->{device} && $hd1->{device} eq $hd2->{device};
-    }
-}
-
-#- are_same_partitions() do not look at the device name since things may have changed
-sub are_same_partitions {
-    my ($part1, $part2) = @_;
-    foreach ('start', 'size', 'pt_type', 'fs_type', 'rootDevice') {
-	$part1->{$_} eq $part2->{$_} or return 0;
-    }
-    1;
-}
-
-sub is_one_big_fat_or_NT {
-    my ($hds) = @_;
-    @$hds == 1 or return 0;
-
-    my @l = fs::get::hds_fstab(@$hds);
-    @l == 1 && isFat_or_NTFS($l[0]) && fs::get::hds_free_space(@$hds) < 10 << 11;
-}
-
-
-sub computeSize {
-    my ($part, $best, $all_hds, $suggestions) = @_;
-    my $max = $part->{maxsize} || $part->{size};
-    return min($max, $best->{size}) unless $best->{ratio};
-
-    my $free_space = fs::get::free_space($all_hds);
-    my @l = my @L = grep { 
-	if ($free_space >= $_->{size}) {
-	    $free_space -= $_->{size};
-	    1;
-	} else { 0 } } @$suggestions;
-
-    my $cylinder_size_maxsize_adjusted;
-    my $tot_ratios = 0;
-    while (1) {
-	my $old_free_space = $free_space;
-	my $old_tot_ratios = $tot_ratios;
-
-	$tot_ratios = sum(map { $_->{ratio} } @l);
-	last if $tot_ratios == $old_tot_ratios;
-
-	@l = grep { 
-	    if ($_->{ratio} && $_->{maxsize} && $tot_ratios &&
-		$_->{size} + $_->{ratio} / $tot_ratios * $old_free_space >= $_->{maxsize}) {
-		return min($max, $best->{maxsize}) if $best->{mntpoint} eq $_->{mntpoint};
-		$free_space -= $_->{maxsize} - $_->{size};
-		if (!$cylinder_size_maxsize_adjusted++) {
-		    eval { $free_space += fs::get::part2hd($part, $all_hds)->cylinder_size - 1 };
-		}
-		0;
-	    } else {
-		$_->{ratio};
-	    } 
-	} @l;
-    }
-    my $size = int min($max, $best->{size} + $free_space * ($tot_ratios && $best->{ratio} / $tot_ratios));
-    #- verify other entry can fill the hole
-    (any { $_->{size} < $max - $size } @L) ? $size : $max;
-}
-
-sub suggest_part {
-    my ($part, $all_hds, $o_suggestions) = @_;
-    my $suggestions = $o_suggestions || $suggestions{server} || $suggestions{simple};
-
-    #- suggestions now use {fs_type}, but still keep compatibility
-    foreach (@$suggestions) {
-	fs::type::set_pt_type($_, $_->{pt_type}) if !exists $_->{fs_type};
-    }
-
-    my $has_swap = any { isSwap($_) } fs::get::fstab($all_hds);
-
-    my @local_suggestions =
-      grep { !fs::get::has_mntpoint($_->{mntpoint}, $all_hds) || isSwap($_) && !$has_swap }
-      grep { !$_->{hd} || $_->{hd} eq $part->{rootDevice} }
-	@$suggestions;
-
-    my ($best) =
-      grep { !$_->{maxsize} || $part->{size} <= $_->{maxsize} }
-      grep { $_->{size} <= ($part->{maxsize} || $part->{size}) }
-      grep { !$part->{fs_type} || $part->{fs_type} eq $_->{fs_type} || isTrueFS($part) && isTrueFS($_) }
-	@local_suggestions;
-
-    defined $best or return 0; #- sorry no suggestion :(
-
-    $part->{mntpoint} = $best->{mntpoint};
-    fs::type::set_type_subpart($part, $best) if !isTrueFS($best) || !isTrueFS($part);
-    $part->{size} = computeSize($part, $best, $all_hds, \@local_suggestions);
-    foreach ('options', 'lv_name', 'encrypt_key') {
-	$part->{$_} = $best->{$_} if $best->{$_};
-    }
-    1;
-}
-
-sub suggestions_mntpoint {
-    my ($all_hds) = @_;
-    sort grep { !/swap/ && !fs::get::has_mntpoint($_, $all_hds) }
-      (@suggestions_mntpoints, map { $_->{mntpoint} } @{$suggestions{server} || $suggestions{simple}});
-}
-
-#- you can do this before modifying $part->{mntpoint}
-#- so $part->{mntpoint} should not be used here, use $mntpoint instead
-sub check_mntpoint {
-    my ($mntpoint, $part, $all_hds) = @_;
-
-    $mntpoint eq '' || isSwap($part) || isNonMountable($part) and return 0;
-    $mntpoint =~ m|^/| or die N("Mount points must begin with a leading /");
-    $mntpoint =~ m|[\x7f-\xff]| and cdie N("Mount points should contain only alphanumerical characters");
-    fs::get::mntpoint2part($mntpoint, [ grep { $_ ne $part } fs::get::really_all_fstab($all_hds) ]) and die N("There is already a partition with mount point %s\n", $mntpoint);
-
-    cdie N("You've selected a software RAID partition as root (/).
-No bootloader is able to handle this without a /boot partition.
-Please be sure to add a /boot partition") if $mntpoint eq "/" && isRAID($part) && !fs::get::has_mntpoint("/boot", $all_hds);
-    die N("You can not use a LVM Logical Volume for mount point %s", $mntpoint)
-      if $mntpoint eq '/boot' && isLVM($part);
-    cdie N("You've selected a LVM Logical Volume as root (/).
-The bootloader is not able to handle this without a /boot partition.
-Please be sure to add a /boot partition") if $mntpoint eq "/" && isLVM($part) && !fs::get::has_mntpoint("/boot", $all_hds);
-    cdie N("You may not be able to install lilo (since lilo does not handle a LV on multiple PVs)")
-      if 0; # arch() =~ /i.86/ && $mntpoint eq '/' && isLVM($hd) && @{$hd->{disks} || []} > 1;
-
-    cdie N("This directory should remain within the root filesystem")
-      if member($mntpoint, qw(/root));
-    die N("This directory should remain within the root filesystem")
-      if member($mntpoint, qw(/bin /dev /etc /lib /sbin /mnt));
-    die N("You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n")
-      if !isTrueLocalFS($part) && $mntpoint eq '/';
-    die N("You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n")
-      if !isTrueFS($part) && member($mntpoint, fs::type::directories_needed_to_boot());
-    die N("You can not use an encrypted file system for mount point %s", $mntpoint)
-      if $part->{options} =~ /encrypted/ && member($mntpoint, qw(/ /usr /var /boot));
-
-    local $part->{mntpoint} = $mntpoint;
-    loopback::check_circular_mounts($part, $all_hds);
-}
-
-sub add {
-    my ($hd, $part, $all_hds, $options) = @_;
-
-    isSwap($part) ?
-      ($part->{mntpoint} = 'swap') :
-      $options->{force} || check_mntpoint($part->{mntpoint}, $part, $all_hds);
-
-    delete $part->{maxsize};
-
-    if (isLVM($hd)) {
-	lvm::lv_create($hd, $part);
-    } else {
-	partition_table::add($hd, $part, $options->{primaryOrExtended});
-    }
-}
-
-sub allocatePartitions {
-    my ($all_hds, $to_add) = @_;
-
-    foreach my $part_ (fs::get::holes($all_hds)) {
-	my ($start, $size, $dev) = @$part_{"start", "size", "rootDevice"};
-	my $part;
-	while (suggest_part($part = { start => $start, size => 0, maxsize => $size, rootDevice => $dev }, 
-			    $all_hds, $to_add)) {
-	    my $hd = fs::get::part2hd($part, $all_hds);
-	    add($hd, $part, $all_hds, {});
-	    $size -= $part->{size} + $part->{start} - $start;
-	    $start = $part->{start} + $part->{size};
-	}
-    }
-}
-
-sub auto_allocate {
-    my ($all_hds, $o_suggestions) = @_;
-    my $before = listlength(fs::get::fstab($all_hds));
-
-    my $suggestions = $o_suggestions || $suggestions{simple};
-    allocatePartitions($all_hds, $suggestions);
-
-    if ($o_suggestions) {
-	auto_allocate_raids($all_hds, $suggestions);
-	if (auto_allocate_vgs($all_hds, $suggestions)) {
-	    #- allocatePartitions needs to be called twice, once for allocating PVs, once for allocating LVs
-	    my @vgs = map { $_->{VG_name} } @{$all_hds->{lvms}};
-	    my @suggested_lvs = grep { member($_->{hd}, @vgs) } @$suggestions;
-	    allocatePartitions($all_hds, \@suggested_lvs);
-	}
-    }
-
-    partition_table::assign_device_numbers($_) foreach @{$all_hds->{hds}};
-
-    if ($before == listlength(fs::get::fstab($all_hds))) {
-	# find out why auto_allocate failed
-	if (any { !fs::get::has_mntpoint($_->{mntpoint}, $all_hds) } @$suggestions) {
-	    die N("Not enough free space for auto-allocating");
-	} else {
-	    die N("Nothing to do");
-	}
-    }
-}
-
-sub auto_allocate_raids {
-    my ($all_hds, $suggestions) = @_;
-
-    my @raids = grep { isRawRAID($_) } fs::get::fstab($all_hds) or return;
-
-    require raid;
-    my @mds = grep { $_->{hd} =~ /md/ } @$suggestions;
-    foreach my $md (@mds) {
-	my @raids_ = grep { !$md->{parts} || $md->{parts} =~ /\Q$_->{mntpoint}/ } @raids;
-	@raids = difference2(\@raids, \@raids_);
-
-	my %h = %$md;
-	delete @h{'hd', 'parts'}; # keeping mntpoint, level, chunk-size, fs_type/pt_type
-	$h{disks} = \@raids_;
-
-	my $part = raid::new($all_hds->{raids}, %h);
-
-	raid::updateSize($part);
-	push @raids, $part; #- we can build raid over raid
-    }
-}
-
-sub auto_allocate_vgs {
-    my ($all_hds, $suggestions) = @_;
-
-    my @pvs = grep { isRawLVM($_) } fs::get::fstab($all_hds) or return 0;
-
-    my @vgs = grep { $_->{VG_name} } @$suggestions or return 0;
-
-    partition_table::write($_) foreach @{$all_hds->{hds}};
-
-    require lvm;
-
-    foreach my $vg (@vgs) {
-	my $lvm = new lvm($vg->{VG_name});
-	push @{$all_hds->{lvms}}, $lvm;
-	
-	my @pvs_ = grep { !$vg->{parts} || $vg->{parts} =~ /\Q$_->{mntpoint}/ } @pvs;
-	@pvs = difference2(\@pvs, \@pvs_);
-
-	foreach my $part (@pvs_) {
-	    raid::make($all_hds->{raids}, $part) if isRAID($part);
-	    $part->{lvm} = $lvm->{VG_name};
-	    delete $part->{mntpoint};
-	    lvm::vg_add($part);
-	    push @{$lvm->{disks}}, $part;
-	}
-	lvm::update_size($lvm);
-    }
-    1;
-}
-
-sub undo_prepare {
-    my ($all_hds) = @_;
-    require Data::Dumper;
-    $Data::Dumper::Purity = 1;
-    foreach (@{$all_hds->{hds}}) {
-	my @h = @$_{@partition_table::fields2save};
-	push @{$_->{undo}}, Data::Dumper->Dump([\@h], ['$h']);
-    }
-}
-sub undo {
-    my ($all_hds) = @_;
-    foreach (@{$all_hds->{hds}}) {
-	my $code = pop @{$_->{undo}} or next;
-	my $h; eval $code;
-	@$_{@partition_table::fields2save} = @$h;
-
-	if ($_->{hasBeenDirty}) {
-	    partition_table::will_tell_kernel($_, 'force_reboot'); #- next action needing write_partitions will force it. We can not do it now since more undo may occur, and we must not needReboot now
-	}
-    }
-    
-}
-
-sub change_type {
-    my ($type, $hd, $part) = @_;
-    $type->{pt_type} != $part->{pt_type} || $type->{fs_type} ne $part->{fs_type} or return;
-    fs::type::check($type->{fs_type}, $hd, $part);
-    $hd->{isDirty} = 1;
-    $part->{mntpoint} = '' if isSwap($part) && $part->{mntpoint} eq "swap";
-    $part->{mntpoint} = '' if isRawLVM($type) || isRawRAID($type);
-    set_isFormatted($part, 0);
-    fs::type::set_type_subpart($part, $type);
-    fs::mount_options::rationalize($part);
-    1;
-}
-
-sub rescuept($) {
-    my ($hd) = @_;
-    my ($ext, @hd);
-
-    my $dev = devices::make($hd->{device});
-    open(my $F, "rescuept $dev|");
-    local $_;
-    while (<$F>) {
-	my ($st, $si, $id) = /start=\s*(\d+),\s*size=\s*(\d+),\s*Id=\s*(\d+)/ or next;
-	my $part = { start => $st, size => $si };
-	fs::type::set_pt_type($part, hex($id));
-	if (isExtended($part)) {
-	    $ext = $part;
-	} else {
-	    push @hd, $part;
-	}
-    }
-    close $F or die "rescuept failed";
-
-    partition_table::raw::zero_MBR($hd);
-    foreach (@hd) {
-	my $b = partition_table::verifyInside($_, $ext);
-	if ($b) {
-	    $_->{start}--;
-	    $_->{size}++;
-	}
-	local $_->{notFormatted};
-
-	partition_table::add($hd, $_, ($b ? 'Extended' : 'Primary'), 1);
-    }
-}
-
-sub compare_with_proc_partitions {
-    my ($hd) = @_;
-
-    my @l1 = partition_table::get_normal_parts($hd);
-    my @l2 = grep { $_->{rootDevice} eq $hd->{device} } read_proc_partitions([$hd]);
-
-    #- /proc/partitions includes partition with type "empty" and a non-null size
-    #- so add them for comparison
-    my ($len1, $len2) = (int(@l1) + $hd->{primary}{nb_special_empty}, int(@l2));
-
-    if ($len1 != $len2 && arch() ne 'ppc') {
-	die sprintf(
-		    "/proc/partitions does not agree with drakx %d != %d:\n%s\n", $len1, $len2,
-		    "/proc/partitions: " . join(", ", map { "$_->{device} ($_->{rootDevice})" } @l2));
-    }
-    $len2;
-}
-
-sub use_proc_partitions {
-    my ($hd) = @_;
-
-    partition_table::raw::zero_MBR($hd);
-    $hd->{readonly} = 1;
-    $hd->{getting_rid_of_readonly_allowed} = 1;
-    $hd->{primary} = { normal => [ grep { $_->{rootDevice} eq $hd->{device} } read_proc_partitions([$hd]) ] };
-}
-
-1;
diff --git a/perl-install/ftp.pm b/perl-install/ftp.pm
deleted file mode 100644
index f94af31ea..000000000
--- a/perl-install/ftp.pm
+++ /dev/null
@@ -1,86 +0,0 @@
-package ftp; # $Id$
-
-use Net::FTP;
-
-use network::network;
-use log;
-
-my %hosts;
-
-1;
-
-sub fromEnv() {
-    #- now URLPREFIX is generated from what is given by mdk-stage1 which is only this 4 variables.
-    $ENV{URLPREFIX} = "ftp://" . ($ENV{LOGIN} && ($ENV{LOGIN} . ($ENV{PASSWORD} && ":$ENV{PASSWORD}") . '@')) .
-      "$ENV{HOST}/$ENV{PREFIX}";
-    @ENV{qw(HOST PREFIX LOGIN PASSWORD)};
-}
-
-sub new {
-    my ($host, $prefix, $o_login, $o_password) = @_;
-    my @l = do { if ($hosts{"$host$prefix"}) {
-	@{$hosts{"$host$prefix"}};
-    } else {
-	my %options = (Passive => 1, Timeout => 60, Port => 21);
-	$options{Firewall} = $ENV{PROXY} if $ENV{PROXY};
-	$options{Port} = $ENV{PROXYPORT} if $ENV{PROXYPORT};
-	unless ($o_login) {
-	    $o_login = 'anonymous';
-	    $o_password = '-drakx@';
-	}
-
-	my $ftp;
-	foreach (1..10) {
-	    $ftp = Net::FTP->new(resolv($host), %options) or die "Can't resolv hostname '$host'\n";
-	    $ftp && $ftp->login($o_login, $o_password) and last;
-
-	    log::l("ftp login failed, sleeping before trying again");
-	    sleep 5 * $_;
-	}
-	$ftp or die "unable to open ftp connection to $host\n";
-	$ftp->binary;
-	$ftp->cwd($prefix);
-
-	my @l = ($ftp, \ (my $_retr));
-	$hosts{"$host$prefix"} = \@l;
-	@l;
-    } };
-    wantarray() ? @l : $l[0];
-}
-
-sub getFile {
-    my ($f, @para) = @_;
-    $f eq 'XXX' and rewindGetFile(), return; #- special case to force closing connection.
-    foreach (1..3) {
-	my ($ftp, $retr) = new(@para ? @para : fromEnv());
-	eval { $$retr->close if $$retr };
-	$@ and rewindGetFile(); #- in case Timeout got us on "->close"
-	$$retr = $ftp->retr($f) and return $$retr;
-	$ftp->code == 550 and log::l("FTP: 550 file unavailable"), return;
-	rewindGetFile();
-	log::l("ftp get failed, sleeping before trying again");
-	sleep 1;
-    }
-}
-
-#-sub closeFiles() {
-#-    #- close any existing connections
-#-    foreach (values %hosts) {
-#-	  my $retr = $_->[1] if ref $_;
-#-	  $$retr->close if $$retr;
-#-	  undef $$retr;
-#-    }
-#-}
-
-sub rewindGetFile() {
-    #- close any existing connection.
-    foreach (values %hosts) {
-	my ($ftp, $retr) = @{$_ || []};
-	#- do not let Timeout kill us!
-	eval { $$retr->close } if $$retr;
-	eval { $ftp->close } if $ftp;
-    }
-
-    #- make sure to reconnect to server.
-    %hosts = ();
-}
diff --git a/perl-install/handle_configs.pm b/perl-install/handle_configs.pm
deleted file mode 100644
index 7d6e5c6e9..000000000
--- a/perl-install/handle_configs.pm
+++ /dev/null
@@ -1,160 +0,0 @@
-package handle_configs;
-
-# $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-sub searchstr {
-    # Preceed all characters which are special characters in regexps with
-    # a backslash, so that the returned string used in a regexp searches
-    # a literal occurence of the original string. White space is replaced
-    # by "\s+"
-    # "quotemeta()" does not serve for this, as it also quotes some regular
-    # characters, as the space
-    my ($s) = @_;
-    $s =~ s!([\\/\(\)\[\]\{\}\|\.\$\@\%\*\?#\+\-])!\\$1!g;
-    return $s;
-}
-
-sub read_directives {
-    # Read one or more occurences of a directive
-    my ($lines_ptr, $directive) = @_;
-
-    my $searchdirective = searchstr($directive);
-    # do not use if_() below because it slow down printerdrake
-    # to the point one can believe in process freeze:
-    map { (/^\s*$searchdirective\s+(\S.*)$/ ? chomp_($1) : ()) } @$lines_ptr;
-}
-
-sub read_unique_directive {
-
-    # Read a directive, if the directive appears more than once, use
-    # the last occurence and remove all the others, if it does not
-    # occur, return the default value
-
-    my ($lines_ptr, $directive, $default) = @_;
-
-    if ((my @d = read_directives($lines_ptr, $directive)) > 0) {
-	my $value = $d[-1];
-	set_directive($lines_ptr, "$directive $value");
-	return $value;
-    } else {
-        return $default;
-    }
-}
-
-sub insert_directive {
-
-    # Insert a directive only if it is not already there
-
-    my ($lines_ptr, $directive) = @_;
-
-    my $searchdirective = searchstr($directive);
-    (/^\s*$searchdirective$/ and return 0) foreach @$lines_ptr;
-    push @$lines_ptr, "$directive\n";
-    return 1;
-}
-
-sub remove_directive {
-
-    # Remove a directive
-
-    my ($lines_ptr, $directive) = @_;
-
-    my $success = 0;
-    my $searchdirective = searchstr($directive);
-    (/^\s*$searchdirective/ and $_ = "" and $success = 1)
-	foreach @$lines_ptr;
-    return $success;
-}
-
-sub comment_directive {
-
-    # Comment out a directive
-
-    my ($lines_ptr, $directive, $exactmatch) = @_;
-
-    my $success = 0;
-    my $searchdirective = searchstr($directive);
-    $searchdirective .= ".*" if !$exactmatch;
-    (s/^\s*($searchdirective)$/#$1/ and $success = 1)
-	foreach @$lines_ptr;
-    return $success;
-}
-
-sub replace_directive {
-
-    # Replace a directive, if it appears more than once, remove
-    # the additional occurences.
-
-    my ($lines_ptr, $olddirective, $newdirective) = @_;
-
-    my $success = 0;
-    $newdirective = "$newdirective\n";
-    my $searcholddirective = searchstr($olddirective);
-    (/^\s*$searcholddirective/ and $_ = $newdirective and 
-     $success = 1 and $newdirective = "") foreach @$lines_ptr;
-    return $success;
-}
-
-
-sub move_directive_to_version_commented_out {
-
-    # If there is a version of the directive "commentedout" which is
-    # commented out, the directive "directive" will be moved in its place.
-
-    my ($lines_ptr, $commentedout, $directive, $exactmatch) = @_;
-
-    my $success = 0;
-    my $searchcommentedout = searchstr($commentedout);
-    $searchcommentedout .= ".*" if !$exactmatch;
-    (/^\s*#$searchcommentedout$/ and 
-     $success = 1 and last) foreach @$lines_ptr;
-    if ($success) {
-	remove_directive($lines_ptr, $directive);
-	(s/^\s*#($searchcommentedout)$/$directive/ and 
-	 $success = 1 and last) foreach @$lines_ptr;
-    }
-    return $success;
-}
-
-sub set_directive {
-
-    # Set a directive, replace the old definition or a commented definition
-
-    my ($lines_ptr, $directive, $full_line) = @_;
-
-    my $olddirective = $directive;
-    if (!$full_line) {
-	$olddirective =~ s/^\s*(\S+)\s+.*$/$1/s;
-	$olddirective ||= $directive;
-    }
-
-    my $success = (replace_directive($lines_ptr, $olddirective,
-				     $directive) ||
-		   insert_directive($lines_ptr, $directive));
-    if ($success) {
-	move_directive_to_version_commented_out($lines_ptr, $directive, 
-						$directive, 1);
-    }
-    return $success;
-}
-
-sub add_directive {
-
-    # Add a directive, replace a commented definition
-
-    my ($lines_ptr, $directive) = @_;
-
-    my $success = insert_directive($lines_ptr, $directive);
-    if ($success) {
-	move_directive_to_version_commented_out($lines_ptr, $directive, 
-						$directive, 1);
-    }
-    return $success;
-}
-
-1;
diff --git a/perl-install/harddrake/TODO b/perl-install/harddrake/TODO
deleted file mode 100644
index b09b8ee5e..000000000
--- a/perl-install/harddrake/TODO
+++ /dev/null
@@ -1,169 +0,0 @@
--*- outline -*-
-
-* drakxtools
-** drakxtools* need XF-{75,100}fonts that requires XFree86
-
-* Harddrake TODO:
-** ui
-*** more usb mice infos
-*** enable the user to force a module (isa, isapnp, ...)
-*** print "(not loaded)" if module isn't loaded
-*** add bus_position to make unique id in ui (check it does not confuse hw service)
-*** cdrom (must be done by diskdrake):
-**** ide-scsi / ide-cd switch (humm, the future (aka 2.6.x kernel) is ide-cd only)
-*** use fbgtk+2 when booting on fbcon for smoother GUI => interactive::fbgtk
-*** help: 
-**** print fields in black and their description in blue as for information fields
-*** check there's at least one config option before showing the "condigure module" button
-*** s/module/driver/ ?
-** fixes
-*** configure at boot-time (hw hooks shared by both harddrake & drakx ?):
-    all /etc/modules aliases 
-**** usb-interfaces (or rewrite usb service in perl for speed)
-**** switch nvidia/nv in /etc/X11/XF86Config
-     if [[ -e /lib/modules/`uname -r`/kernel/drivers/video/NVdriver ]]; then
-           perl -pi -e 's!Driver "nv.*"!Driver "nvidia"!g;s!#HARDDRAKE (Load.*glx)!\1!g' /etc/X11/XF86Config-4
-        else    
-           perl -pi -e 's!Driver "nv.*"!Driver "nv"!g;s!(Load.*glx)!#HARDDRAKE \1!g' /etc/X11/XF86Config-4
-        fi
-*** non needed stuff to run X must be posponed after X11 startup
-**** eg: scanner/audio/printer/floppy/cdrom/tape/tv/webcam/joystick/ ... 
-** packaging : separate version for harddrake & drakxtool
-** configurators
-*** new cd burner: offer to install cdrecord and one of its gui frontends
-*** new dvd driver : offer to install xine||mplayer
-*** draksound :
-**** add a dialog so that the user choose its wavetable.
-**** list all availables drivers, defaulting to first alternative, prepending old one with '*'
-**** add 'ALSA/OSS': tag to modules list
-** detect engine:
-*** detect isapnp devices
-*** set more field for fscking 0x0000:0x0000 usb controllers
-
-** move all drakx tools into just a small one-liner that uses real <tool>.pm
-    so that harddrake and mcc reduces their memory usage pattern and
-    be faster (the next fast step will be to use perl6/parrot)
-
-    drawback : this would level down quite a lot the global mcc/harddrake robustness
-
-** check there're enough parameters in module config
-** for to send a message for unknown hardware to install@mandrakesoft.com
-
-    Subject: [UNKNOW HARDWARE] or a new other ml
-        -> do you konw how to configure it under linux ?
-        -> description
-
-
-* ####################################################################
-* ####################################################################
-
-* / no hope / useless :
-** enable a string to be passed as detector; in that case, do ourself the =~
-** alter detect_devices in order to only probe one time
-** detect *ALL* mouses if more than one (mousedrake?)
-
-**  deeper data structure in Mandrake 9.2 ?
-
-    "Mass storage" => (Floppy,
-				   Disk,
-				   Cdrom,
-				   Tape)
-
-    "Network" => (Ethernetcard,
-			   Modem,
-			   Isdn)
-    "Multimedia" => (Videocard,
-				 Tvcard,
-				 Soundcard,
-				 Webcam)
-    "System" => (Bridge,
-			  Cpu,
-			  Memory)
-
-
-    "Publishing" => (Printer,
-				 Scanner)
-
-    "Pointing" => (Mouse,
-			    Joystick)
-
-    "Buses" => (Ideinterface,
-			 Scsiinterface,
-			 Usbinterface,
-			 );
-
-    "Unknown/Others",
-
-* ####################################################################
-
-* Suggestions
-** various
-Subject: Re: [Cooker] Optional ALSA Support for SB Live!
-From: Fabrice FACORAT <f.faber@netcourrier.com>
-To: cooker@linux-mandrake.com
-In-Reply-To: <m2ofhvtpaq.fsf@vador.mandrakesoft.com>
-References: <20020311051222.47DC087CA5@yavin.mandrax.org> 
-	<m2ofhvtpaq.fsf@vador.mandrakesoft.com>
-Date: 11 Mar 2002 11:12:31 +0100
-Message-Id: <1015841551.3895.31.camel@bastard.localdomain>
-
-Le lun 11/03/2002 � 10:41, Thierry Vignaud a �crit :
- 
-> >   In Mandrake 8.1 rerunning Harddrake post-setup would switch over
-> > to ALSA (which supports MIDI synth), however in 8.2 the only way to
-> > get ALSA support is to manually edit the modules.conf file. This
-> > would be disasterous for someone who isn't familar with
-> > modules.conf, but had been instructed on the mandrake-expert/newbie
-> > lists (as many had been) to simply rerun Harddrake on the sound card
-> > to get ALSA (and hence MIDI synth support).
-> 
-> give me the result of lspcidrake -f -v so that i switch your card
-> from oss to alsa.
-
-no please.
-just one month ago you switch SBLive from Alsa to OSS ( cause drakX
-set it as OSS and harddrake as Alsa ).
-There were also a discussion concerning the fact that Alsa doesn't
-support emu-tools and so all available options.
-Last but not least, several peoples report pbs with Alsa ( is sound is
-too high you have disturbances ). So someone is going to ask you for
-OSS as it want to use some features os SBLive, etc ...
-
-To my mind the best way for this ( but too late for 8.2 ) will be to
-have a tool called soundrake. Thanks to this tools, you choose at the
-beginning if you want to use OSS or alsa and then try to correctly
-configure your sound card. This tool should be able to work in
-embended mo in harddrake or harddrake2 ( infos concerning this so long
-awaiting harddrake 2 ? ).
-
-In order to make this tool be a perfect tool, it should be able to
-advice user concerning the advantage and the disadvantage of each
-driver ( indeed alsa sometimes is better than OSS as it support full
-duplex and wave mixing on more sound cards ).
-It's also disturbing is harddrake set alsa by default and XrakX set
-OSS by default as sometimes by lanching harddrake ( just to see what
-happen ) you lose ( or seems to lose ) your sound card ( mute mixer )
-
-For example :
-+ launch harddrake
-+ use autodetection : yes/no
-+ if auto detects enable, it detects a SBLive.
-+ explanations text concerning the fact that :
-   if I use OSS I will be able to use sounds effects, live drive and
-others things ( AC-3 passthrough ) thanks to the emu10k1-tools packages
-( available on CD sets and installable via Software Manager )
-   if I use Alsa, I won't be able to use emu10k1-tools but at the
-contrary I will be able to use midi software as alsa module support midi
-+ ask user which one he wants to use : OSS / Alsa ?
-+ set the sound card drivers and modules.conf according to user wishes
-+ <mode= dream> if I select OSS, installed emu10k1-tools and provide a
-GUI to configure them </mode = dream>
-+ <mode= dream> if I select Alsa unmute at least PCM and Vol or display
-a warning saying that by default Alsa mute everything ( configure alsa
-service so that it save mixer settings )
-+ test the sound ( mandrake sound theme )
-+ do you hear something ?
-+ yes -> your sound card have been properly set.
-+ if no -> try the others drivers set or send lspcidrake -v to
-somebody@somewhere.org to check for support for your sound card
-+ Do you ahave another sound card ?
diff --git a/perl-install/harddrake/autoconf.pm b/perl-install/harddrake/autoconf.pm
deleted file mode 100644
index 061d738af..000000000
--- a/perl-install/harddrake/autoconf.pm
+++ /dev/null
@@ -1,46 +0,0 @@
-package harddrake::autoconf;
-
-use common;
-use any;
-
-sub xconf {
-    my ($modules_conf, $o) = @_;
-
-    log::l('automatic XFree configuration');
-    
-    require Xconfig::default;
-    $o->{raw_X} = Xconfig::default::configure(do_pkgs_standalone->new);
-    
-    require Xconfig::main;
-    require do_pkgs;
-    Xconfig::main::configure_everything_auto_install($o->{raw_X}, do_pkgs_standalone->new, {}, { allowFB => 1 });
-
-    modules::load_category($modules_conf, 'various/agpgart'); 
-}
-
-sub network_conf {
-    my ($obj) = @_;
-    require network::network;
-    network::network::easy_dhcp($obj->{modules_conf}, $obj->{netc}, $obj->{intf}) and $obj->{netcnx}{type} = 'lan';
-}
-
-sub mouse_conf {
-    my ($modules_conf) = @_;
-    require do_pkgs;
-    require mouse;
-    mouse::write_conf(do_pkgs_standalone->new, $modules_conf, mouse::detect($modules_conf), 1);
-}
-
-sub pcmcia {
-    my ($pcic) = @_;
-
-    #- should be set after installing the package above otherwise the file will be renamed.
-    setVarsInSh("$::prefix/etc/sysconfig/pcmcia", {
-     PCMCIA    => bool2yesno($pcic),
-     PCIC      => $pcic,
-     PCIC_OPTS => "",
-     CORE_OPTS => "",
-    });
-}
-
-1;
diff --git a/perl-install/harddrake/check_snd.pl b/perl-install/harddrake/check_snd.pl
deleted file mode 100755
index dfa007b80..000000000
--- a/perl-install/harddrake/check_snd.pl
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use lib qw(/usr/lib/libDrakX);
-
-use common;
-use harddrake::sound;
-use list_modules;
-
-
-my @listed_modules = @{$list_modules::l{multimedia}{sound}};
-my @drivers = (keys %harddrake::sound::oss2alsa, keys %harddrake::sound::alsa2oss);
-my @alternatives = uniq map { @{$_} } values %harddrake::sound::oss2alsa, values %harddrake::sound::alsa2oss;
-
-# check harddrake::sound's data structures're coherent
-print "unknown alternative drivers : [", join(', ', difference2(\@alternatives, \@drivers)), "]\n";
-
-# check that list_modules and harddrake::sound are synced
-print "non real sound modules (submodules, tv, usb, ...) : [", join(', ', difference2(\@drivers, \@listed_modules)), "]\n";
-print "forgotten sound modules : [", join(', ', difference2(\@listed_modules, \@drivers)), "]\n";
diff --git a/perl-install/harddrake/data.pm b/perl-install/harddrake/data.pm
deleted file mode 100644
index 2e3506bae..000000000
--- a/perl-install/harddrake/data.pm
+++ /dev/null
@@ -1,538 +0,0 @@
-package harddrake::data;
-
-use strict;
-use detect_devices;
-use common;
-use modules;
-
-our @ISA = qw(Exporter);
-our @EXPORT_OK = qw(version tree);
-our ($version, $sbindir, $bindir) = ("10", "/usr/sbin", "/usr/bin");
-
-my @devices = detect_devices::probeall();
-
-# Update me each time you handle one more devices class (aka configurator)
-sub unknown() {
-    grep { $_->{media_type} !~ /BRIDGE|class\|Mouse|DISPLAY|Hub|MEMORY_RAM|MULTIMEDIA_(VIDEO|AUDIO|OTHER)|NETWORK|Printer|SERIAL_(USB|SMBUS)|STORAGE_(IDE|OTHER|SCSI)|SYSTEM_OTHER|tape|UPS/
-	       && !member($_->{driver}, qw(cpia_usb cyber2000fb forcedeth ibmcam megaraid mod_quickcam nvnet ohci1394 ov511 ov518_decomp scanner ultracam usbvideo usbvision))
-	       && $_->{driver} !~ /^ISDN|Mouse:USB|Removable:zip|class\|Mouse|sata|www.linmodems.org/
-	       && $_->{type} ne 'network'
-	       && $_->{description} !~ /Alcatel|ADSL Modem/;
-	   } @devices;
-}
-
-my @alrd_dected;
-sub f { 
-    my @devs = grep { !member(pciusb_id($_), @alrd_dected) } @_;
-    push @alrd_dected, map { pciusb_id($_) } @devs;
-    @devs;
-}
-
-
-# tree format ("CLASS_ID", "type", "type_icon", configurator, detect_sub)
-# NEVER, NEVER alter CLASS_ID or you'll see harddrake2 service detect changes
-# in hw configuration ... :-(
-
-# FIXME: add translated items
-
-sub is_removable { $_[0] =~ /FLOPPY|ZIP|DVDROM|CDROM|BURNER/ }
-
-sub set_removable_configurator {
-    my ($class, $device) = @_;
-    return "/usr/sbin/diskdrake --removable=$device->{device}" if is_removable($class);
- }
-
-sub set_removable_auto_configurator {
-    my ($class, $device) = @_;
-    return "/usr/sbin/drakupdate_fstab --no-flag --auto --add $device->{device}" if is_removable($class);
-}
-
-sub set_removable_remover {
-    my ($class, $device) = @_;
-    return "/usr/sbin/drakupdate_fstab --no-flag --del $device->{device}" if is_removable($class);
-}
-
-my $modules_conf = modules::any_conf->read;
-
-# Format is (HW class ID, l18n class name, icon, config tool , is_to_be_detected_on_boot)
-our @tree =
-    (
-     {
-      class => "FLOPPY",
-      string => N("Floppy"),
-      icon => "floppy.png",
-      configurator => "",
-      detector => \&detect_devices::floppies,
-      checked_on_boot => 1,
-      automatic => 1,
-     },
-
-     {
-      class => "ZIP",
-      string => N("Zip"),
-      icon => "floppy.png",
-      configurator => "",
-      detector => sub {
-	  my ($options) = @_;
-	  if ($options->{PARALLEL_ZIP_DETECTION}) {
-	      modules::load_parallel_zip($modules_conf) and $modules_conf->write;
-	  }
-	  detect_devices::zips();
-      },
-      checked_on_boot => 1,
-      automatic => 1,
-     },
-
-     {
-      class => "HARDDISK",
-      string => N("Hard Disk"),
-      icon => "harddisk.png",
-      configurator => "$sbindir/diskdrake",
-      detector => sub { f(detect_devices::hds()) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "CDROM",
-      string => N("CDROM"),
-      icon => "cd.png",
-      configurator => "",
-      detector => sub { grep { !(detect_devices::isBurner($_) || detect_devices::isDvdDrive($_)) } &detect_devices::cdroms },
-      checked_on_boot => 1,
-      automatic => 1,
-     },
-
-     {
-      class => "BURNER",
-      string => N("CD/DVD burners"),
-      icon => "cd.png",
-      configurator => "",
-      detector => \&detect_devices::burners,
-      checked_on_boot => 1,
-      automatic => 1,
-     },
-
-     {
-      class => "DVDROM",
-      string => N("DVD-ROM"),
-      icon => "cd.png",
-      configurator => "",
-      detector => sub { grep { ! detect_devices::isBurner($_) } detect_devices::dvdroms() },
-      checked_on_boot => 1,
-      automatic => 1,
-     },
-
-     {
-      class => "TAPE",
-      string => N("Tape"),
-      icon => "tape.png",
-      configurator => "",
-      detector => \&detect_devices::tapes,
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "VIDEO",
-      string => N("Videocard"),
-      icon => "video.png",
-      configurator => "$sbindir/XFdrake",
-      configurator_auto => "$sbindir/XFdrake",
-      detector =>  sub { f(grep { $_->{driver} =~ /^(Card|Server):/ || $_->{media_type} =~ /DISPLAY_VGA/ } @devices) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "DVB",
-      string => N("DVB card"),
-      icon => "tv.png",
-      detector => sub { f(modules::probe_category('multimedia/dvb')) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "TV",
-      string => N("Tvcard"),
-      icon => "tv.png",
-      configurator => "/usr/bin/XawTV",
-      detector => sub { f(grep { $_->{media_type} =~ /MULTIMEDIA_VIDEO/ && $_->{bus} eq 'PCI' || $_->{driver} eq 'usbvision' } @devices) },
-      checked_on_boot => 1,
-     },
-     
-     {
-      class => "MULTIMEDIA_OTHER",
-      string => N("Other MultiMedia devices"),
-      icon => "multimedia.png",
-      configurator => "",
-      detector => sub { f(grep { $_->{media_type} =~ /MULTIMEDIA_OTHER/ } @devices) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "AUDIO",
-      string => N("Soundcard"),
-      icon => "sound.png",
-      configurator => "$sbindir/draksound",
-      detector => sub { 
-          require list_modules;
-          my @modules = list_modules::category2modules('multimedia/sound');
-          f(grep { $_->{media_type} =~ /MULTIMEDIA_AUDIO/  || member($_->{driver}, @modules) } @devices);
-      },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "WEBCAM",
-      string => N("Webcam"),
-      icon => "webcam.png",
-      configurator => "",
-      detector => sub { 
-          require list_modules;
-          my @modules = list_modules::category2modules('multimedia/webcam');
-          f(grep { $_->{media_type} =~ /MULTIMEDIA_VIDEO/ && $_->{bus} ne 'PCI' || member($_->{driver}, @modules) } @devices);
-      },
-      # managed by hotplug:
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "CPU",
-      string => N("Processors"),
-      icon => "cpu.png",
-      configurator => "",
-      detector => sub { detect_devices::getCPUs() },
-      # maybe should we install schedutils?
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "ISDN",
-      string => N("ISDN adapters"),
-      icon => "modem.png",
-      configurator => "$sbindir/drakconnect",
-      detector => sub { require network::isdn; my $isdn = network::isdn::detect_backend($modules_conf); if_(@$isdn, f(@$isdn)) },
-      # we do not check these b/c this need user interaction (auth, ...):
-      checked_on_boot => 0,
-     },
-
-
-     {
-      class => "USB_AUDIO",
-      string => N("USB sound devices"),
-      icon => "sound.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('multimedia/usb_sound')) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "RADIO",
-      string => N("Radio cards"),
-      icon => "tv.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('multimedia/radio')) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "ATM",
-      string => N("ATM network cards"),
-      icon => "hw_network.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('network/atm')) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "WAN",
-      string => N("WAN network cards"),
-      icon => "hw_network.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('network/wan')) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "BLUETOOTH",
-      string => N("Bluetooth devices"),
-      icon => "hw_network.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('bus/bluetooth')) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "ETHERNET",
-      string => N("Ethernetcard"),
-      icon => "hw_network.png",
-      configurator => "$sbindir/drakconnect",
-      detector => sub {
-          require list_modules;
-          require network::ethernet;
-          my @net_modules = list_modules::category2modules(list_modules::ethernet_categories());
-          f(grep {
-              $_->{media_type} && $_->{media_type} =~ /^NETWORK/
-                || $_->{type} && $_->{type} eq 'network'
-                  ||  member($_->{driver}, @net_modules);
-          } @devices);
-      },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "MODEM",
-      string => N("Modem"),
-      icon => "modem.png",
-      configurator => "$sbindir/drakconnect",
-      detector => sub { detect_devices::getModem($modules_conf) },
-      # we do not check these b/c this need user interaction (auth, ...):
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "ADSL",
-      string => N("ADSL adapters"),
-      icon => "modem.png",
-      configurator => "$sbindir/drakconnect",
-      detector => sub { 
-          require network::adsl;
-          my $a = network::adsl::adsl_detect();
-          $a ? f(map { @$_ } grep { defined($_) } values %$a) : ();
-      },
-      # we do not check these b/c this need user interaction (auth, ...):
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "MEMORY",
-      string => N("Memory"),
-      icon => "memory.png",
-      configurator => "",
-      detector => sub { grep { member($_->{name}, 'Cache', 'Memory Module') } detect_devices::dmidecode() },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "AGP",
-      string => N("AGP controllers"),
-      icon => "memory.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('various/agpgart')) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "PRINTER",
-      string => N("Printer"),
-      icon => "hw_printer.png",
-      configurator => "$sbindir/printerdrake",
-      detector => sub { require printer::detect; printer::detect::local_detect() },
-      # we do not check these b/c this need user interaction (auth, ...):
-      checked_on_boot => 0,
-     },
-
-
-
-     {
-      class => "GAMEPORT",
-      string => 
-      #-PO: these are joysticks controllers:
-      N("Game port controllers"),
-      icon => "joystick.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('multimedia/gameport')) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "JOYSTICK",
-      string => N("Joystick"),
-      icon => "joystick.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('input/joystick')), f(grep { $_->{description} =~ /Joystick/ } @devices) },
-      checked_on_boot => 0,
-     },
-
-
-     {
-      class => "SATA_STORAGE",
-      string => N("SATA controllers"),
-      icon => "ide_hd.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('disk/sata')) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "RAID_STORAGE",
-      string => N("RAID controllers"),
-      icon => "ide_hd.png",
-      configurator => "",
-      detector => sub { f(modules::probe_category('disk/hardware_raid')) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "ATA_STORAGE",
-      string => N("(E)IDE/ATA controllers"),
-      icon => "ide_hd.png",
-      configurator => "",
-      detector => sub { f(grep { $_->{media_type} =~ /STORAGE_(IDE|OTHER)/ } @devices) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "FIREWIRE_CONTROLLER",
-      string => N("Firewire controllers"),
-      icon => "usb.png",
-      configurator => "",
-      detector => sub { f(grep { $_->{driver} =~ /ohci1394/ } @devices) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "PCMCIA_CONTROLLER",
-      string => N("PCMCIA controllers"),
-      icon => "scsi.png",
-      configurator => "",
-      detector => sub { f(detect_devices::pcmcia_controller_probe()) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "SCSI_CONTROLLER",
-      string => N("SCSI controllers"),
-      icon => "scsi.png",
-      configurator => "",
-      detector => sub { f(grep { $_->{media_type} =~ /STORAGE_SCSI/ } @devices) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "USB_CONTROLLER",
-      string => N("USB controllers"),
-      icon => "usb.png",
-      configurator => "",
-      detector => sub { f(grep { $_->{media_type} eq 'SERIAL_USB' } @devices) },
-      checked_on_boot => 1,
-     },
-
-     {
-      class => "USB_HUB",
-      string => N("USB ports"),
-      icon => "usb.png",
-      configurator => "",
-      detector => sub { f(grep { $_->{media_type} =~ /Hub/ } @devices) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "SMB_CONTROLLER",
-      string => N("SMBus controllers"),
-      icon => "usb.png",
-      configurator => "",
-      detector => sub { f(grep { $_->{media_type} =~ /SERIAL_SMBUS/ } @devices) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "BRIDGE",
-      string => N("Bridges and system controllers"),
-      icon => "memory.png",
-      configurator => "",
-      detector => sub { f(grep { $_->{media_type} =~ /BRIDGE|MEMORY_RAM|SYSTEM_OTHER/ } @devices) },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "KEYBOARD",
-      string => N("Keyboard"),
-      icon => "usb.png",
-      configurator => "$sbindir/keyboardrake",
-      detector => sub {
-          f(grep { $_->{description} =~ /Keyboard/i } @devices),
-            # USB devices are filtered out since we already catch them through probeall():
-          grep { $_->{bus} ne 'usb' && $_->{driver} eq 'kbd' && $_->{description} !~ /PC Speaker/ } detect_devices::getInputDevices();
-      },
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "MISC_INPUT",
-      string => N("Tablet and touchscreen"),
-      icon => "hw_mouse.png",
-      detector => sub { f(modules::probe_category('input/tablet'), modules::probe_category('input/touchscreen')) },
-      configurator => "$sbindir/mousedrake",
-      checked_on_boot => 0,
-     },
-
-     {
-      class => "MOUSE",
-      string => N("Mouse"),
-      icon => "hw_mouse.png",
-      configurator => "$sbindir/mousedrake",
-      detector => sub {
-          f(grep { $_->{driver} =~ /^Mouse:|^Tablet:/ || $_->{media_type} =~ /class\|Mouse/ } @devices),
-            # USB devices are filtered out since we already catch them through probeall():
-            grep { $_->{bus} ne 'usb' && $_->{driver} =~ /mouse/ } detect_devices::getInputDevices();
-      },
-      checked_on_boot => 1,
-      automatic => 1,
-     },
-     
-     {
-      class => "UPS",
-      string => N("UPS"),
-      icon => "ups.png",
-      configurator => "$sbindir/drakups",
-      detector => sub { f(detect_devices::getUPS()) },
-      checked_on_boot => 0,
-     },
-     
-     {
-      class => "SCANNER",
-      string => N("Scanner"),
-      icon => "scanner.png",
-      configurator => "$sbindir/scannerdrake",
-      detector => sub { 
-         require scanner; f(scanner::detect()) },
-      checked_on_boot => 0,
-     },
-     
-     {
-      class => "UNKNOWN",
-      string => N("Unknown/Others"),
-      icon => "unknown.png",
-      configurator => "",
-      detector => sub { f(unknown()) },
-      checked_on_boot => 0,
-     },
-
-    );
-
-sub pciusb_id {
-    my ($dev) = @_;
-    my %alt = (
-               bus => 'usb_bus',
-               description => 'usb_description',
-               id => 'usb_id',
-               pci_bus => 'usb_pci_bus',
-               pci_device => 'usb_pci_device',
-               vendor => 'usb_vendor',
-               );
-    join(':', map { $dev->{$alt{$_}} || $dev->{$_} } qw(bus pci_bus pci_device vendor id subvendor subid description));
-}
-
-
-sub custom_id {
-    my ($device, $str) = @_;
-    return if !ref($device);
-    defined($device->{device}) ? $device->{device} :
-        (defined($device->{processor}) ? 
-         N("cpu # ") . $device->{processor} . ": " . $device->{'model name'} :
-         $device->{"Socket Designation"} ?
-         "$device->{name} (" . $device->{"Socket Designation"} . ")" :
-         $device->{name} ? $device->{name} :
-         (defined($device->{description}) ? $device->{description} : $str));
-}
-
-1;
diff --git a/perl-install/harddrake/sound.pm b/perl-install/harddrake/sound.pm
deleted file mode 100644
index e1651f23c..000000000
--- a/perl-install/harddrake/sound.pm
+++ /dev/null
@@ -1,368 +0,0 @@
-package harddrake::sound;
-# lists filled with Danny Tholen help, enhanced by Thierry Vignaud
-#
-# No ALSA for OSS's 
-#    o isa cards: msnd_pinnacle, pas2, 
-#    o pci cards: ad1889, sam9407
-# No OSS for ALSA's
-#    o pci cards: snd-als4000, snd-es968, snd-hdsp
-#    o isa cards: snd-azt2320, snd-cs4231, snd-cs4236, 
-#      snd-dt0197h, snd-korg1212, snd-rme32
-#    o pcmcia cards: snd-vxp440 snd-vxpocket
-
-# TODO: 
-#    o ensure sound is not user (either dsp/midi/sequencer/mixer)
-#    o fix sound/alsa services
-
-use strict;
-use common;
-use interactive;
-use run_program;
-use modules;
-use list_modules;
-use detect_devices;
-use log;
-
-
-our %alsa2oss = 
-    (
-     if_(arch() =~ /ppc/, "snd-powermac" => [ "dmasound_pmac" ]),
-     if_(arch() =~ /sparc/,
-         "snd-sun-amd7930" => [ "unknown" ],
-         "snd-sun-cs4231" => [ "unknown" ],
-         "snd-sun-dbri" => [ "unknown" ],
-        ),
-     "snd-ad1816a" => [ "ad1816" ], # isa
-     "snd-ad1848"  => [ "ad1848", "pss" ], # isa
-     "snd-ali5451" => [ "trident" ],
-     "snd-als100"  => [ "sb" ], # isa
-     "snd-als4000" => [ "unknown" ],
-     "snd-atiixp"  => [ "unknown" ],
-     "snd-au8810"  => [ "unknown" ],
-     "snd-au8820"  => [ "unknown" ],
-     "snd-au8830"  => [ "unknown" ],
-     "snd-audigyls" => [ "unknown" ], # pci, renamed as snd-ca0106
-     "snd-azt2320" => [ "unknown" ], # isa
-     "snd-azt3328" => [ "unknown" ], # isa
-     "snd-azx"     => [ "unknown" ],
-     "snd-bt87x"   => [ "btaudio" ],
-     "snd-ca0106"  => [ "unknown" ], # pci
-     "snd-cmi8330" => [ "sb" ], # isa
-     "snd-cmipci"  => [ "cmpci" ],
-     "snd-cs4231"  => [ "unknown" ], # isa
-     "snd-cs4232"  => [ "cs4232" ],  # isa
-     "snd-cs4236"  => [ "ad1848" ], # isa
-     "snd-cs4281"  => [ "cs4281" ],
-     "snd-cs46xx"  => [ "cs46xx" ],
-     "snd-darla20" => [ "unknown" ],
-     "snd-darla24" => [ "unknown" ],
-     "snd-dt0197h" => [ "unknown" ], # isa
-     "snd-dt019x"  => [ "unknown" ], # isa
-     "snd-emu10k1" => [ "audigy", "emu10k1" ],
-     "snd-emu10k1x" => [ "unknown" ],
-     "snd-ens1370" => [ "es1370" ],
-     "snd-ens1371" => [ "es1371" ],
-     "snd-es1688"  => [ "sb" ], # isa
-     "snd-es18xx"  => [ "sb" ], # isa
-     "snd-es1938"  => [ "esssolo1" ],
-     "snd-es1968"  => [ "maestro" ], # isa
-     "snd-es968"   => [ "sb" ],
-     "snd-fm801"   => [ "forte" ],
-     "snd-gina20"  => [ "unknown" ],
-     "snd-gina24"  => [ "unknown" ],
-     "snd-gina3g"  => [ "unknown" ],
-     "snd-gusclassic" => [ "gus" ], # isa
-     "snd-gusextreme" => [ "gus" ], # isa
-     "snd-gusmax"  => [ "gus" ],    # isa
-     "snd-hda-intelp"    => [ "unknown" ],
-     "snd-hdspm"   => [ "unknown" ],
-     "snd-hdsp"    => [ "unknown" ],
-     "snd-ice1712" => [ "unknown" ], # isa
-     "snd-ice1724" => [ "unknown" ], # isa
-     "snd-indi"    => [ "unknown" ], # pci
-     "snd-indigo"  => [ "unknown" ], # pci
-     "snd-indigodj" => [ "unknown" ], # pci
-     "snd-indigoio" => [ "unknown" ], # pci
-     "snd-intel8x0" => [ "ali5455", "i810_audio", "nvaudio" ],
-     "snd-interwave" => [ "gus" ],  # isa
-     "snd-interwave-stb" => [ "unknown" ], # isa
-     "snd-korg1212" => [ "unknown" ], # isa
-     "snd-layla20" => [ "unknown" ],
-     "snd-layla24" => [ "unknown" ],
-     "snd-layla3g" => [ "unknown" ],
-     "snd-maestro3" => [ "maestro3" ],
-     "snd-mia"     => [ "unknown" ],
-     "snd-mixart"  => [ "unknown" ],
-     "snd-mona"    => [ "unknown" ],
-     "snd-mpu401"  => [ "mpu401" ],
-     "snd-nm256"   => [ "nm256_audio" ],
-     "snd-opl3sa2" => [ "opl3", "opl3sa", "opl3sa2" ], # isa
-     "snd-opti92x-ad1848" => [ "unknown" ], # isa
-     "snd-opti92x-cs4231" => [ "unknown" ], # isa
-     "snd-opti93x" => [ "mad16" ],
-     "snd-pcxhr"   => [ "unknown" ], # pci
-     "snd-rme32"   => [ "unknown" ], # isa
-     "snd-rme96"   => [ "rme96xx" ], # pci
-     "snd-rme9652" => [ "rme96xx" ], # pci
-     "snd-sb16"    => ["sscape", "sb"],
-     "snd-sb8"     => [ "sb" ],
-     "snd-sbawe"   => [ "awe_wave" ],
-     "snd-sgalaxy" => [ "sgalaxy" ], # isa
-     "snd-sonicvibes" => [ "sonicvibes" ],
-     "snd-sscape"  => [ "sscape" ], # isa
-     "snd-trident" => [ "trident" ],
-     "snd-usb-audio" => [ "audio" ], # usb
-     "snd-via82xx"  => [ "via82cxxx_audio" ],
-     "snd-vx222"   => [ "unknown" ],
-     "snd-vxp440"  => [ "unknown" ], # pcmcia
-     "snd-vxpocket" => [ "unknown" ], # pcmcia
-     "snd-wavefront" => [ "wavefront" ], # isa
-     "snd-ymfpci"  => [ "ymfpci" ],
-     );
-
-
-our %oss2alsa = 
-    (
-     if_(arch() =~ /ppc/, "dmasound_pmac" => [ "snd-powermac" ]),
-     "ad1816"  => [ "snd-ad1816a" ],
-     "ad1848"  => [ "snd-ad1848", "snd-cs4236" ],
-     "ad1889"  => [ "unknown" ],
-     "ali5455" => [ "snd-intel8x0" ],
-     "audigy"  => [ "snd-emu10k1" ],
-     "audio"   => [ "snd-usb-audio" ], # usb
-     "awe_wave" => [ "snd-sbawe" ],
-     "btaudio" => [ "snd-bt87x" ],
-     "cmpci"   => [ "snd-cmipci" ],
-     "cs4232"  => [ "snd-cs4232" ],
-     "cs4281"  => [ "snd-cs4281" ],
-     "cs46xx"  => [ "snd-cs46xx" ],
-     "emu10k1" => [ "snd-emu10k1" ],
-     "es1370"  => [ "snd-ens1370" ],
-     "es1371"  => [ "snd-ens1371" ],
-     "esssolo1" => [ "snd-es1938" ],
-     "forte"   => [ "snd-fm801" ],
-     "gus"     => ["snd-interwave", "snd-gusclassic", "snd-gusmax", "snd-gusextreme"],
-     "i810_audio" => [ "snd-intel8x0" ],
-     "ice1712" => [ "snd-ice1712" ],
-     "mad16"   => [ "snd-opti93x" ],
-     "maestro" => [ "snd-es1968" ],
-     "maestro3" => [ "snd-maestro3" ],
-     "mpu401"  => [ "snd-mpu401" ],
-     "msnd_pinnacle" => [ "unknown" ],
-     "nm256_audio" => [ "snd-nm256" ],
-     "nvaudio" => [ "snd-intel8x0" ],
-     "opl3"    => [ "snd-opl3sa2" ],
-     "opl3sa"  => [ "snd-opl3sa2" ],
-     "opl3sa2" => [ "snd-opl3sa2" ],
-     "pas2"    => [ "unknown" ],
-     "pss"     => [ "snd-ad1848" ],
-     "rme96xx" => [ "snd-rme96", "snd-rme9652" ],
-     "sam9407" => [ "unknown" ],
-     "sb"      => [ "snd-als100", "snd-cmi8330", "snd-es1688", "snd-es18xx", "snd-es968", "snd-sb8", "snd-sb16" ],
-     "sgalaxy" => [ "snd-sgalaxy" ],
-     "sonicvibes" => [ "snd-sonicvibes" ],
-     "sscape"  => [ "snd-sb16", "snd-sscape" ],
-     "trident" => [ "snd-ali5451", "snd-trident" ],
-     "via82cxxx_audio" => [ "snd-via82xx" ],
-     "wavefront" => [ "snd-wavefront" ],
-     "ymfpci"  => [ "snd-ymfpci" ],
-     );
-
-my @blacklist = qw(cs46xx cs4281);
-my $blacklisted = 0;
-
-sub rooted { run_program::rooted($::prefix, @_) }
-
-sub unload { modules::unload(@_) if $::isStandalone || $blacklisted }
-
-sub load { 
-    my ($modules_conf, $name) = @_;
-    modules::load_and_configure($modules_conf, $name) if $::isStandalone || $blacklisted;
-}
-
-sub get_alternative {
-    my ($driver) = @_;
-    $alsa2oss{$driver} || $oss2alsa{$driver};
-}
-
-sub do_switch {
-    my ($in, $modules_conf, $old_driver, $new_driver, $index) = @_;
-    return if $old_driver eq $new_driver;
-    my $_wait = $in->wait_message(N("Please wait"), N("Please Wait... Applying the configuration"));
-    log::explanations("removing old $old_driver\n");
-    if ($::isStandalone) {
-        rooted("service sound stop") unless $blacklisted;
-        rooted("service alsa stop") if $old_driver =~ /^snd-/ && !$blacklisted;
-        unload($old_driver);    # run_program("/sbin/modprobe -r $driver"); # just in case ...
-    }
-    $modules_conf->remove_module($old_driver);
-    $modules_conf->set_sound_slot("sound-slot-$index", $new_driver);
-    $modules_conf->write;
-    if ($new_driver =~ /^snd-/) {   # new driver is an alsa one
-        $in->do_pkgs->ensure_binary_is_installed('alsa-utils', 'alsactl');
-        rooted("service alsa start") if $::isStandalone && !$blacklisted;
-        rooted("/sbin/chkconfig --add alsa")  if $::isStandalone;
-        load($modules_conf, $new_driver) if $::isStandalone;   # service alsa is buggy
-    } else { rooted("/sbin/chkconfig --del alsa") }
-    log::explanations("loading new $new_driver\n");
-    rooted("/sbin/chkconfig --add sound"); # just in case ...
-    rooted("service sound start") if $::isStandalone && !$blacklisted;
-}
-
-sub switch {
-    my ($in, $modules_conf, $device) = @_;
-    my $driver = $device->{current_driver} || $device->{driver};
-
-    foreach (@blacklist) { $blacklisted = 1 if $driver eq $_ }
-    my @alternative = @{get_alternative($driver)};
-    unless ($driver eq $device->{driver} || member($device->{driver}, @alternative)) {
-	push @alternative, @{get_alternative($device->{driver})}, $device->{driver};
-    }
-    if (@alternative) {
-        my $new_driver = $driver;
-        push @alternative, $driver;
-        my %des = modules::category2modules_and_description('multimedia/sound');
-
-        if ($new_driver eq 'unknown') {
-            $in->ask_from(N("No alternative driver"),
-                          N("There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\"",
-                            $device->{description}, $driver),
-                          [
-                           get_any_driver_entry($in, $modules_conf, $driver, $device),
-                          ]
-                         );
-        } elsif ($in->ask_from_({ title => N("Sound configuration"),
-                                  messages => 
-				  N("Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s).",
-				    $device->{description}) .
-                          #-PO: here the first %s is either "OSS" or "ALSA", 
-                          #-PO: the second %s is the name of the current driver
-                          #-PO: and the third %s is the name of the default driver
-				  N("\n\nYour card currently use the %s\"%s\" driver (default driver for your card is \"%s\")", ($driver =~ /^snd-/ ? "ALSA " : "OSS "), $driver, $device->{driver}),
-				  interactive_help => sub {  
-				      N("OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.
-What's more, OSS drivers all reinvent the wheel.
-
-ALSA (Advanced Linux Sound Architecture) is a modularized architecture which
-supports quite a large range of ISA, USB and PCI cards.\n
-It also provides a much higher API than OSS.\n
-To use alsa, one can either use:
-- the old compatibility OSS api
-- the new ALSA api that provides many enhanced features but requires using the ALSA library.
-");
-                                        },
-				},
-                               [
-                                { 
-                                    label => N("Driver:"), val => \$new_driver, list => \@alternative, default => $new_driver, sort =>1,
-                                    help => join("\n\n", map { qq("$_": ) . $des{$_} } @alternative),
-                                    allow_empty_list => 1,
-                                },
-                                {
-                                    val => N("Trouble shooting"), disabled => sub {},
-                                    clicked => sub { &trouble($in) }
-                                },
-                                get_any_driver_entry($in, $modules_conf, $driver, $device),
-                                ]))
-        {
-            return if $new_driver eq $device->{current_driver};
-            log::explanations("switching audio driver from '" . $device->{current_driver} . "' to '$new_driver'\n");
-            $in->ask_warn(N("Warning"), N("The old \"%s\" driver is blacklisted.\n
-It has been reported to oops the kernel on unloading.\n
-The new \"%s\" driver will only be used on next bootstrap.", $device->{current_driver}, $new_driver)) if $blacklisted;
-            do_switch($in, $modules_conf, $device->{current_driver}, $new_driver, $device->{sound_slot_index});
-            $device->{current_driver} = $new_driver;
-        }
-    } elsif ($driver =~ /^Bad:/) {
-        $driver =~ s/^Bad://;
-        $in->ask_warn(N("No open source driver"), 
-                      N("There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\".",
-                        $device->{description}, $driver));
-    } elsif ($driver eq "unknown") {
-        $in->ask_from(N("No known driver"), 
-                      N("There's no known driver for your sound card (%s)",
-                        $device->{description}),
-                      [ get_any_driver_entry($in, $modules_conf, $driver, $device) ]);
-    } else {
-        $in->ask_warn(N("Unknown driver"), 
-                      N("Error: The \"%s\" driver for your sound card is unlisted",
-                      $driver));
-    }
-  end:
-}
-
-sub config {
-    my ($in, $modules_conf, $device) = @_;
-    switch($in, $modules_conf, $device);
-}
-
-
-sub trouble {
-    my ($in) = @_;
-    $in->ask_warn(N("Sound trouble shooting"),
-                  formatAlaTeX(
-                               #-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-                               N("The classic bug sound tester is to run the following commands:
-
-
-- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses
-by default
-
-- \"grep sound-slot /etc/modules.conf\" will tell you what driver it
-currently uses
-
-- \"/sbin/lsmod\" will enable you to check if its module (driver) is
-loaded or not
-
-- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will
-tell you if sound and alsa services're configured to be run on
-initlevel 3
-
-- \"aumix -q\" will tell you if the sound volume is muted or not
-
-- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.
-")));
-}
-
-sub get_any_driver_entry {
-    my ($in, $modules_conf, $driver, $device) = @_;
-    return () if $::isInstall;
-    +{
-        val => N("Let me pick any driver"), disabled => sub {},
-        clicked => sub {
-            my $old_driver = $driver;
-            if ($in->ask_from(N("Choosing an arbitrary driver"),
-                              formatAlaTeX(
-                                           #-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-                                           N("If you really think that you know which driver is the right one for your card
-you can pick one in the above list.
-
-The current driver for your \"%s\" sound card is \"%s\" ", $device->{description}, $driver)),
-                              [
-                               { label => N("Driver:"), val => \$driver, list => [ category2modules("multimedia/sound") ], type => 'combo', default => $driver, sort =>1, separator => '|' },
-                              ]
-                             )) {
-                do_switch($in, $modules_conf, $old_driver, $driver, $device->{sound_slot_index});
-                goto end;
-            }
-        }
-    };
-}
-
-
-sub configure_sound_slots {
-    my ($modules_conf) = @_;
-    my $altered = 0;
-    each_index {
-        my $default_driver = $modules_conf->get_alias("sound-slot-$::i");
-        if (!member($default_driver, @{get_alternative($_->{driver})}, $_->{driver})) {
-            $altered ||= $default_driver;
-            $modules_conf->set_sound_slot("sound-slot-$::i", $_->{driver});
-	    $modules_conf->set_options($_->{driver}, "xbox=1") if $_->{driver} eq "snd-intel8x0" && is_xbox();
-        }
-    } detect_devices::getSoundDevices();
-    $modules_conf->write if $altered && $::isStandalone;
-}
-
-
-1;
diff --git a/perl-install/harddrake/v4l.pm b/perl-install/harddrake/v4l.pm
deleted file mode 100644
index aa005b664..000000000
--- a/perl-install/harddrake/v4l.pm
+++ /dev/null
@@ -1,338 +0,0 @@
-package harddrake::v4l;
-
-use strict;
-
-use common;
-use interactive;
-use detect_devices;
-use lang;
-use log;
-use modules;
-
-# please update me on bttv update :
-
-my $default = N("Auto-detect");
-# TODO: split %tuners_lst in per driver perl source files that get transformed in Storable files
-my %tuners_lst = 
-    (
-     -1 => $default,
-     0 => "Temic|PAL (4002 FH5)",
-     1 => "Philips|PAL_I (FI1246 and compatibles)",
-     2 => "Philips|NTSC (FI1236, FM1236 and compatibles)",
-     3 => "Philips|(SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)",
-     4 => "NoTuner",
-     5 => "Philips|PAL_BG (FI1216 and compatibles)",
-     6 => "Temic|NTSC (4032 FY5)",
-     7 => "Temic|PAL_I (4062 FY5)",
-     8 => "Temic|NTSC (4036 FY5)",
-     9 => "Alps|HSBH1",
-     10 => "Alps|TSBE1",
-     11 => "Alps|TSBB5",
-     12 => "Alps|TSBE5",
-     13 => "Alps|TSBC5",
-     14 => "Temic|PAL_BG (4006FH5)",
-     15 => "Alps|TSCH6",
-     16 => "Temic|PAL_DK (4016 FY5)",
-     17 => "Philips|NTSC_M (MK2)",
-     18 => "Temic|PAL_I (4066 FY5)",
-     19 => "Temic|PAL* auto (4006 FN5)",
-     20 => "Temic|PAL_BG (4009 FR5) or PAL_I (4069 FR5)",
-     21 => "Temic|NTSC (4039 FR5)",
-     22 => "Temic|PAL/SECAM multi (4046 FM5)",
-     23 => "Philips|PAL_DK (FI1256 and compatibles)",
-     24 => "Philips|PAL/SECAM multi (FQ1216ME)",
-     25 => "LG|PAL_I+FM (TAPC-I001D)",
-     26 => "LG|PAL_I (TAPC-I701D)",
-     27 => "LG|NTSC+FM (TPI8NSR01F)",
-     28 => "LG|PAL_BG+FM (TPI8PSB01D)",
-     29 => "LG|PAL_BG (TPI8PSB11D)",
-     30 => "Temic|PAL* auto + FM (4009 FN5)",
-     31 => "SHARP|NTSC_JP (2U5JF5540)",
-     32 => "Samsung|PAL TCPM9091PD27",
-     33 => "MT20xx universal",
-     34 => "Temic|PAL_BG (4106 FH5)",
-     35 => "Temic|PAL_DK/SECAM_L (4012 FY5)",
-     36 => "Temic|NTSC (4136 FY5)",
-     37 => "LG|PAL (newer TAPC series)",
-     38 => "Philips|PAL/SECAM multi (FM1216ME)",
-     39 => "LG|NTSC (newer TAPC series)",
-     40 => "HITACHI V7-J180AT",
-     41 => "Philips|PAL_MK (FI1216 MK)",
-     42 => "Philips|1236D ATSC/NTSC daul in",
-     43 => "Philips|NTSC MK3 (FM1236MK3 or FM1236/F)",
-     44 => "Philips|4 in 1 (ATI TV Wonder Pro/Conexant)",
-     45 => "Microtune|4049 FM5",
-
-     );
-
-# Tweaked from Cardlist
-my $cards_lst = {
-    'bttv' => {
-        $default => -1,
-        N("Unknown|Generic") => 0,
-        "M|Miro|PCTV" => 1,
-        "H|Hauppauge|bt848" => 2,
-        "S|STB|Hauppauge 878" => 3,
-        "I|Intel|Create and Share PCI (bttv type 4)" => 4,
-        "I|Intel|Smart Video Recorder III (bttv type 4)" => 4,
-        "D|Diamond|DTV2000" => 5,
-        "A|AVerMedia|TVPhone" => 6,
-        "M|MATRIX-Vision|MV-Delta" => 7,
-        "L|Lifeview|FlyVideo II (Bt848) LR26" => 8,
-        "G|Guillemot|MAXI TV Video PCI2 LR26" => 27,
-        "G|Genius/Kye|Video Wonder Pro II (848 or 878)" => 8,
-        "I|IMS/IXmicro|TurboTV" => 9,
-        "H|Hauppauge|bt878" => 10,
-        "M|Miro|PCTV pro" => 11,
-        "A|ADS Technologies|Channel Surfer TV (bt848)" => 12,
-        "A|AVerMedia|TVCapture 98" => 13,
-        "A|Aimslab|Video Highway Xtreme (VHX)" => 14,
-        "Z|Zoltrix|TV-Max" => 15,
-        "P|Prolink|Pixelview PlayTV (bt878)" => 16,
-        "L|Leadtek|WinView 601" => 17,
-        "A|AVEC|Intercapture" => 18,
-        "L|Lifeview|FlyKit LR38 Bt848 (capture only)" => 19,
-        "L|Lifeview|FlyVideo II EZ" => 19,
-        "C|CEI|Raffles Card" => 20,
-        "L|Lifeview|FlyVideo 98" => 21,
-        "L|Lucky Star|Image World ConferenceTV LR50" => 21,
-        "A|Askey|CPH050" => 22,
-        "P|Phoebe Micro|Tv Master + FM" => 22,
-        "M|Modular|Technology MM205 PCTV (bt878)" => 23,
-        "A|Askey|CPH06X (bt878)" => 24,
-        "G|Guillemot|Maxi TV Video 3" => 24,
-        "A|Askey|CPH05X (bt878)" => 24,
-        N("Unknown|CPH05X (bt878) [many vendors]") => 24,
-        N("Unknown|CPH06X (bt878) [many vendors]") => 24,
-        "T|Terratec|Terra TV+ Version 1.0 (Bt848)" => 25,
-        "Vobis|TV-Boostar" => 25,
-        "T|Terratec|TV-Boostar" => 25,
-        "H|Hauppauge|WinCam newer (bt878)" => 26,
-        "L|Lifeview|FlyVideo 98" => 27,
-        "G|Guillemot|MAXI TV Video PCI2 LR50" => 27,
-        "T|Terratec|TerraTV+" => 28,
-        "I|Imagenation|PXC200" => 29,
-        "L|Lifeview|FlyVideo 98 LR50" => 30,
-        "Formac|iProTV" => 31,
-        "Formac|iProTV I (bt848)" => 31,
-        "I|Intel|Create and Share PCI (bttv type 32)" => 32,
-        "I|Intel|Smart Video Recorder III (bttv type 32)" => 32,
-        "T|Terratec|TerraTValue" => 33,
-        "L|Leadtek|WinFast TV 2000" => 34,
-        "L|Leadtek|WinFast VC 100" => 35,
-        "L|Lifeview|FlyVideo 98 LR50" => 35,
-        "C|Chronos|Video Shuttle II" => 35,
-        "L|Lifeview|FlyVideo 98FM LR50" => 36,
-        "T|Typhoon|TView TV/FM Tuner" => 36,
-        "P|Prolink|PixelView PlayTV pro" => 37,
-        "P|Prolink|PixelView PlayTV Theater" => 37,
-        "A|Askey|CPH06X TView99" => 38,
-        "P|Pinnacle|PCTV Studio/Rave" => 39,
-        "S|STB|STB2 TV PCI FM, P/N 6000704" => 40,
-        "A|AVerMedia|TVPhone 98" => 41,
-        "P|ProVideo|PV951" => 42,
-        "L|Little|OnAir TV" => 43,
-        "S|Sigma|TVII-FM" => 44,
-        "M|MATRIX-Vision|MV-Delta 2" => 45,
-        "Z|Zoltrix|Genie TV/FM" => 46,
-        "T|Terratec|TV/Radio+" => 47,
-        "A|Askey|CPH03x" => 48,
-        "D|Dynalink|Magic TView" => 48,
-        "I|IODATA|GV-BCTV3/PCI" => 49,
-        "P|Prolink|PixelView PlayTV PAK" => 50,
-        "L|Lenco|MXTV-9578 CP" => 50,
-        "P|Prolink|PV-BT878P+4E" => 50,
-        "L|Lenco|MXTV-9578CP (Bt878)" => 50,
-        "E|Eagle|Wireless Capricorn2 (bt878A)" => 51,
-        "P|Pinnacle|PCTV Studio Pro" => 52,
-        "T|Typhoon|KNC1 TV Station RDS" => 53,
-        "T|Typhoon|TV Tuner RDS (black package)" => 53,
-        "T|Typhoon|TView RDS + FM Stereo" => 53,
-        "L|Lifeview|FlyVideo 2000" => 54,
-        "L|Lifeview|FlyVideo A2" => 54,
-        "L|Lifetec|LT 9415 TV [LR90]" => 54,
-        "A|Askey|CPH031" => 55,
-        "L|Lenco|MXR-9571 (Bt848)" => 55,
-        "Bestbuy|Easy TV" => 55,
-        "L|Lifeview|FlyVideo 98FM LR50" => 56,
-        "G|GrandTec|Grand Video Capture (Bt848)" => 57,
-        "A|Askey|CPH060" => 58,
-        "P|Phoebe Micro|TV Master Only (No FM)" => 58,
-        "A|Askey|CPH03x TV Capturer" => 59,
-        "M|Modular|Technology MM100 PCTV" => 60,
-        "A|AG|Electronics GMV1" => 61,
-        "A|Askey|CPH061" => 62,
-        "Bestbuy|Easy TV (bt878)" => 62,
-        "L|Lifetec|LT9306" => 62,
-        "M|Medion|MD9306" => 62,
-        "A|ATI|TV-Wonder" => 63,
-        "A|ATI|TV-Wonder VE" => 64,
-        "L|Lifeview|FlyVideo 2000S LR90" => 65,
-        "T|Terratec|TValueRadio" => 66,
-        "I|IODATA|GV-BCTV4/PCI" => 67,
-        "3Dfx|VoodooTV FM (Euro)" => 68,
-        "3Dfx|VoodooTV 200 (USA)" => 68,
-        "A|Active|Imaging AIMMS" => 69,
-        "P|Prolink|Pixelview PV-BT878P+ (Rev.4C)" => 70,
-        "L|Lifeview|FlyVideo 98EZ (capture only) LR51" => 71,
-#    "G|Genius/Kye|Video Wonder/Genius Internet Video Kit" => 71,
-        "P|Prolink|Pixelview PV-BT878P+ (Rev.9B) (PlayTV Pro rev.9B FM+NICAM)" => 72,
-        "T|Typhoon|TV Tuner Pal BG (blue package)" => 72,
-        "S|Sensoray|311" => 73,
-        "RemoteVision|MX (RV605)" => 74,
-        "P|Powercolor|MTV878" => 75,
-        "P|Powercolor|MTV878R" => 75,
-        "P|Powercolor|MTV878F" => 75,
-        "C|Canopus|WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)" => 76,
-        "G|GrandTec|Multi Capture Card (Bt878)" => 77,
-        "Jetway|TV/Capture JW-TV878-FBK" => 78,
-        "Kworld|KW-TV878RF" => 78,
-        "D|DSP Design|TCVIDEO" => 79,
-        "H|Hauppauge|WinTV PVR" => 80,
-        "G|GV-BCTV5/PCI" => 81,
-        "O|Osprey|100/150 (878)" => 82,
-        "O|Osprey|100/150 (848)" => 83,
-        "O|Osprey|101 (848)" => 84,
-        "O|Osprey|101/151" => 85,
-        "O|Osprey|101/151 w/ svid" => 86,
-        "O|Osprey|200/201/250/251" => 87,
-        "O|Osprey|200/250" => 88,
-        "O|Osprey|210/220" => 89,
-        "O|Osprey|500" => 90,
-        "O|Osprey|540" => 91,
-        "O|Osprey|2000" => 92,
-        "I|IDS|Eagle" => 93,
-        "P|Pinnacle|PCTV Sat" => 94,
-        "Formac|ProTV II (bt878)" => 95,
-        "M|MachTV" => 96,
-        "E|Euresys|Picolo" => 97,
-        "P|ProVideo|PV150" => 98,
-        "A|AD-TVK503" => 99,
-        "H|Hercules|Smart TV Stereo" => 100,
-        "P|Pace|TV & Radio Card" => 101,
-        "I|IVC-200" => 102,
-        "G|Grand X-Guard / Trust 814PCI" => 103,
-        "N|Nebula Electronics|DigiTV" => 104,
-        "P|ProVideo|PV143" => 105,
-        "P|PHYTEC|VD-009-X1 MiniDIN (bt878)" => 106,
-        "P|PHYTEC|VD-009-X1 Combi (bt878)" => 107,
-        "P|PHYTEC|VD-009 MiniDIN (bt878)" => 108,
-        "P|PHYTEC|VD-009 Combi (bt878)" => 109,
-        "I|IVC-100" => 110,
-        "I|IVC-120G" => 111,
-        "P|pcHDTV HD-2000 TV" => 112,
-        "T|Twinhan DST + clones" => 113,
-        "L|Leadtek|Winfast VC100" => 114,
-        "T|Teppro|TEV-560/InterVision IV-560" => 115,
-        "S|SIMUS|GVC1100" => 116,
-        "N|NGS|NGSTV+" => 117,
-        "L|LMLBT4" => 118,
-        "T|Tekram|M205 PRO" => 119,
-        "C|Conceptronic|CONTVFMi" => 120,
-
-    },
-    'saa7134' => {
-        N("Unknown|Generic") => 0,
-        "Proteus|Pro [philips reference design]" => 1,
-        "LifeView|FlyVIDEO3000" => 2,
-        "LifeView|FlyVIDEO2000" => 3,
-        "EMPRESS" => 4,
-        "SKNet|Monster TV" => 5,
-        "Tevion|MD 9717" => 6,
-        "KNC|One TV-Station RDS" => 7,
-        "Terratec|Cinergy 400 TV" => 8,
-        "Medion|5044" => 9,
-        "Kworld/KuroutoShikou SAA7130-TVPCI" => 10,
-        "Terratec|Cinergy 600 TV" => 11,
-        "Medion|7134" => 12,
-        "ELSA|EX-VISION 300TV" => 13,
-        "ELSA|EX-VISION 500TV" => 14,
-        "ASUS|TV-FM 7134" => 15,
-        "AOPEN|VA1000 POWER" => 16,
-        "10MOONS PCI TV CAPTURE CARD" => 17,
-        "BMK|MPEX No Tuner" => 18,
-        "Compro VideoMate TV" => 19,
-        "Matrox|CronosPlus" => 20,
-        "Medion|2819" => 21,
-        "BMK|MPEX Tuner" => 22,
-        "Medion|2819 / AverMedia M156" => 23,
-        "AVerMedia|M156" => 23,
-        "BMK|MPEX Tuner alternative" => 24,
-        "ASUS|TV-FM 7133" => 25,
-        "Pinnacle|PCTV Stereo (saa7134)" => 26,
-        "Manli|MuchTV M-TV002" => 27,
-        "Manli|MuchTV M-TV001" => 28,
-        "Nagase Sangyo TransGear 3000TV" => 29,
-        "Elitegroup|ECS TVP3XP FM1216 Tuner Card(PAL-BG,FM)" => 30,
-        "Elitegroup|ECS TVP3XP FM1236 Tuner Card (NTSC,FM)" => 31,
-        "AVACS|SmartTV" => 32,
-        "AVerMedia|DVD EZMaker" => 33,
-    }
-};
-
-my %pll_lst = 
-    (
-     -1 => N("Default"),
-     0 => "do not use pll",
-     1 => "28 Mhz Crystal (X)",
-     2 => "35 Mhz Crystal"
-     );
-
-sub config {
-    my ($in, $modules_conf, $driver) = @_;
-
-    my $min_gbuffers = 2;
-    my $max_gbuffers = 32;
-
-    my %conf = (gbuffers => 4, card => $default, tuner => -1, radio => 0, pll => -1);
-
-    my %cards_list = %{$cards_lst->{$driver}};
-    my %rvs_cards_list = reverse %cards_list;
-
-    # get the existing options (if there are any)
-    my $current = $modules_conf->get_options($driver);
-
-    foreach (split(/\s+/,$current)) {
-        $conf{$1} = $2 if /^(gbuffers|tuner|radio|pll)=(.+)/;
-        $conf{$1} = $rvs_cards_list{$2} if /^(card)=(.+)/;
-    }
-    
-    #Sanity checks on defaults
-    $conf{gbuffers} = max($min_gbuffers, $conf{gbuffers});
-    $conf{gbuffers} = min($max_gbuffers, $conf{gbuffers});
-    $conf{card}  = $default if !defined $cards_list{$conf{card}};
-    $conf{tuner} = -1 if !defined $tuners_lst{$conf{tuner}};
-    $conf{pll}   = -1 if !defined $pll_lst{$conf{tuner}};
-    $conf{radio} =  0 if $conf{radio} !~ /(0|1)/;
-
-
-    if ($in->ask_from("BTTV configuration", N("For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.
-If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed."),
-                      [
-                       { label => N("Card model:"), val => \$conf{card}, list => [ keys %cards_list ], type => 'combo', default => -1, sort =>1, separator => '|' },
-                       { label => N("Tuner type:"), val => \$conf{tuner}, list => [keys %tuners_lst], format => sub { $tuners_lst{$_[0]} }, sort => 1, separator => '|' },
-                       { label => N("Number of capture buffers:"), val => \$conf{gbuffers}, min => $min_gbuffers, max => $max_gbuffers, sort => 1, default => 0, type => 'range', advanced => 1, help => N("number of capture buffers for mmap'ed capture") },                    
-                       if_($driver eq 'bttv',
-                           { label => N("PLL setting:"), val => \$conf{pll}, list => [keys %pll_lst], format => sub { $pll_lst{$_[0]} }, sort => 1, default => 0, advanced =>1 },
-                           { label => N("Radio support:"), val => \$conf{radio}, type => "bool", text => N("enable radio support") }),
-                       ]
-                      ))
-    {
-        $conf{card} = $cards_list{$conf{card}};
-
-        my $options = 
-            'radio=' . ($conf{radio} ? 1 : 0) . ' ' .
-            join(' ', map { if_($conf{$_} ne -1, "$_=$conf{$_}") } qw(card pll tuner gbuffers));
-        if ($options) {
-            log::l(qq([harddrake::v4l] set "$options" options for $driver));
-#             log::explanations("modified file /etc/modules.conf ($options)") if $::isStandalone;
-              $modules_conf->set_options($driver, $options);
-          }
-        return 1;
-    }
-    return 0;
-}
-
-
-
-1;
diff --git a/perl-install/help.pm b/perl-install/help.pm
deleted file mode 100644
index 5642e2350..000000000
--- a/perl-install/help.pm
+++ /dev/null
@@ -1,870 +0,0 @@
-package help;
-use common;
-
-1;
-
-# IMPORTANT: Do not edit this File - It is automatically generated 
-#            from the manuals !!! 
-#            Write a mail to <documentation@mandriva.com> if
-#            you want it changed.
-sub acceptLicense() {
-    N("Before continuing, you should carefully read the terms of the license. It
-covers the entire Mandriva Linux distribution. If you agree with all the
-terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"
-button will reboot your computer.", N("Accept"), N("Quit"));
-}
-sub addUser() {
-    N("GNU/Linux is a multi-user system which means each user can have his or her
-own preferences, own files and so on. But unlike \"root\", who is the
-system administrator, the users you add at this point will not be authorized
-to change anything except their own files and their own configurations,
-protecting the system from unintentional or malicious changes which could
-impact on the system as a whole. You'll have to create at least one regular
-user for yourself -- this is the account which you should use for routine,
-day-to-day usage. Although it's very easy to log in as \"root\" to do
-anything and everything, it may also be very dangerous! A very simple
-mistake could mean that your system will not work any more. If you make a
-serious mistake as a regular user, the worst that can happen is that you'll
-lose some information, but you will not affect the entire system.
-
-The first field asks you for a real name. Of course, this is not mandatory
--- you can actually enter whatever you like. DrakX will use the first word
-you type in this field and copy it to the \"%s\" one, which is the name
-this user will enter to log onto the system. If you like, you may override
-the default and change the user name. The next step is to enter a password.
-From a security point of view, a non-privileged (regular) user password is
-not as crucial as the \"root\" password, but that's no reason to neglect it
-by making it blank or too simple: after all, your files could be the ones
-at risk.
-
-Once you click on \"%s\", you can add other users. Add a user for each one
-of your friends, your father, your sister, etc. Click \"%s\" when you're
-finished adding users.
-
-Clicking the \"%s\" button allows you to change the default \"shell\" for
-that user (bash by default).
-
-When you're finished adding users, you'll be asked to choose a user who
-will be automatically logged into the system when the computer boots up. If
-you're interested in that feature (and do not care much about local
-security), choose the desired user and window manager, then click on
-\"%s\". If you're not interested in this feature, uncheck the \"%s\" box.", N("User name"), N("Accept user"), N("Next"), N("Advanced"), N("Next"), N("Do you want to use this feature?"));
-}
-sub ask_mntpoint_s() {
-    N("Listed here are the existing Linux partitions detected on your hard drive.
-You can keep the choices made by the wizard, since they are good for most
-common installations. If you make any changes, you must at least define a
-root partition (\"/\"). Do not choose too small a partition or you will not
-be able to install enough software. If you want to store your data on a
-separate partition, you will also need to create a \"/home\" partition
-(only possible if you have more than one Linux partition available).
-
-Each partition is listed as follows: \"Name\", \"Capacity\".
-
-\"Name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc.");
-}
-sub chooseCd() {
-    N("The Mandriva Linux installation is distributed on several CD-ROMs. If a
-selected package is located on another CD-ROM, DrakX will eject the current
-CD and ask you to insert the required one. If you do not have the requested
-CD at hand, just click on \"%s\", the corresponding packages will not be
-installed.", N("Cancel"));
-}
-sub choosePackages() {
-    N("It's now time to specify which programs you wish to install on your system.
-There are thousands of packages available for Mandriva Linux, and to make it
-simpler to manage, they have been placed into groups of similar
-applications.
-
-Mandriva Linux sorts package groups in four categories. You can mix and
-match applications from the various categories, so a ``Workstation''
-installation can still have applications from the ``Server'' category
-installed.
-
- * \"%s\": if you plan to use your machine as a workstation, select one or
-more of the groups in the workstation category.
-
- * \"%s\": if you plan on using your machine for programming, select the
-appropriate groups from that category. The special \"LSB\" group will
-configure your system so that it complies as much as possible with the
-Linux Standard Base specifications.
-
-   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,
-instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance
-of the system. However, if you do not select the \"LSB\" group you will
-still have a system which is nearly 100%% LSB-compliant.
-
- * \"%s\": if your machine is intended to be a server, select which of the
-more common services you wish to install on your machine.
-
- * \"%s\": this is where you will choose your preferred graphical
-environment. At least one must be selected if you want to have a graphical
-interface available.
-
-Moving the mouse cursor over a group name will display a short explanatory
-text about that group.
-
-You can check the \"%s\" box, which is useful if you're familiar with the
-packages being offered or if you want to have total control over what will
-be installed.
-
-If you start the installation in \"%s\" mode, you can deselect all groups
-and prevent the installation of any new packages. This is useful for
-repairing or updating an existing system.
-
-If you deselect all groups when performing a regular installation (as
-opposed to an upgrade), a dialog will pop up suggesting different options
-for a minimal installation:
-
- * \"%s\": install the minimum number of packages possible to have a
-working graphical desktop.
-
- * \"%s\": installs the base system plus basic utilities and their
-documentation. This installation is suitable for setting up a server.
-
- * \"%s\": will install the absolute minimum number of packages necessary
-to get a working Linux system. With this installation you will only have a
-command-line interface. The total size of this installation is about 65
-megabytes.", N("Workstation"), N("Development"), N("Server"), N("Graphical Environment"), N("Individual package selection"), N("Upgrade"), N("With X"), N("With basic documentation"), N("Truly minimal install"));
-}
-sub choosePackagesTree() {
-    N("If you choose to install packages individually, the installer will present
-a tree containing all packages classified by groups and subgroups. While
-browsing the tree, you can select entire groups, subgroups, or individual
-packages.
-
-Whenever you select a package on the tree, a description will appear on the
-right to let you know the purpose of that package.
-
-!! If a server package has been selected, either because you specifically
-chose the individual package or because it was part of a group of packages,
-you'll be asked to confirm that you really want those servers to be
-installed. By default Mandriva Linux will automatically start any installed
-services at boot time. Even if they are safe and have no known issues at
-the time the distribution was shipped, it is entirely possible that
-security holes were discovered after this version of Mandriva Linux was
-finalized. If you do not know what a particular service is supposed to do or
-why it's being installed, then click \"%s\". Clicking \"%s\" will install
-the listed services and they will be started automatically at boot time. !!
-
-The \"%s\" option is used to disable the warning dialog which appears
-whenever the installer automatically selects a package to resolve a
-dependency issue. Some packages depend on others and the installation of
-one particular package may require the installation of another package. The
-installer can determine which packages are required to satisfy a dependency
-to successfully complete the installation.
-
-The tiny floppy disk icon at the bottom of the list allows you to load a
-package list created during a previous installation. This is useful if you
-have a number of machines that you wish to configure identically. Clicking
-on this icon will ask you to insert the floppy disk created at the end of
-another installation. See the second tip of the last step on how to create
-such a floppy.", N("No"), N("Yes"), N("Automatic dependencies"));
-}
-sub configurePrinter() {
-    N("\"%s\": clicking on the \"%s\" button will open the printer configuration
-wizard. Consult the corresponding chapter of the ``Starter Guide'' for more
-information on how to set up a new printer. The interface presented in our
-manual is similar to the one used during installation.", N("Printer"), N("Configure"));
-}
-sub configureServices() {
-    N("This dialog is used to select which services you wish to start at boot
-time.
-
-DrakX will list all services available on the current installation. Review
-each one of them carefully and uncheck those which are not needed at boot
-time.
-
-A short explanatory text will be displayed about a service when it is
-selected. However, if you're not sure whether a service is useful or not,
-it is safer to leave the default behavior.
-
-!! At this stage, be very careful if you intend to use your machine as a
-server: you probably do not want to start any services which you do not need.
-Please remember that some services can be dangerous if they're enabled on a
-server. In general, select only those services you really need. !!");
-}
-sub configureTimezoneGMT() {
-    N("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to
-local time according to the time zone you selected. If the clock on your
-motherboard is set to local time, you may deactivate this by unselecting
-\"%s\", which will let GNU/Linux know that the system clock and the
-hardware clock are in the same time zone. This is useful when the machine
-also hosts another operating system.
-
-The \"%s\" option will automatically regulate the system clock by
-connecting to a remote time server on the Internet. For this feature to
-work, you must have a working Internet connection. We recommend that you
-choose a time server located near you. This option actually installs a time
-server which can be used by other machines on your local network as well.", N("Hardware clock set to GMT"), N("Automatic time synchronization"));
-}
-sub configureX_card_list() {
-    N("Graphic Card
-
-   The installer will normally automatically detect and configure the
-graphic card installed on your machine. If this is not correct, you can
-choose from this list the card you actually have installed.
-
-   In the situation where different servers are available for your card,
-with or without 3D acceleration, you're asked to choose the server which
-best suits your needs.");
-}
-sub configureX_chooser() {
-    N("X (for X Window System) is the heart of the GNU/Linux graphical interface
-on which all the graphical environments (KDE, GNOME, AfterStep,
-WindowMaker, etc.) bundled with Mandriva Linux rely upon.
-
-You'll see a list of different parameters to change to get an optimal
-graphical display.
-
-Graphic Card
-
-   The installer will normally automatically detect and configure the
-graphic card installed on your machine. If this is not correct, you can
-choose from this list the card you actually have installed.
-
-   In the situation where different servers are available for your card,
-with or without 3D acceleration, you're asked to choose the server which
-best suits your needs.
-
-
-
-Monitor
-
-   Normally the installer will automatically detect and configure the
-monitor connected to your machine. If it is not correct, you can choose
-from this list the monitor which is connected to your computer.
-
-
-
-Resolution
-
-   Here you can choose the resolutions and color depths available for your
-graphics hardware. Choose the one which best suits your needs (you will be
-able to make changes after the installation). A sample of the chosen
-configuration is shown in the monitor picture.
-
-
-
-Test
-
-   Depending on your hardware, this entry might not appear.
-
-   The system will try to open a graphical screen at the desired
-resolution. If you see the test message during the test and answer \"%s\",
-then DrakX will proceed to the next step. If you do not see it, then it
-means that some part of the auto-detected configuration was incorrect and
-the test will automatically end after 12 seconds and return you to the
-menu. Change settings until you get a correct graphical display.
-
-
-
-Options
-
-   This steps allows you to choose whether you want your machine to
-automatically switch to a graphical interface at boot. Obviously, you may
-want to check \"%s\" if your machine is to act as a server, or if you were
-not successful in getting the display configured.", N("Yes"), N("No"));
-}
-sub configureX_monitor() {
-    N("Monitor
-
-   Normally the installer will automatically detect and configure the
-monitor connected to your machine. If it is not correct, you can choose
-from this list the monitor which is connected to your computer.");
-}
-sub configureX_resolution() {
-    N("Resolution
-
-   Here you can choose the resolutions and color depths available for your
-graphics hardware. Choose the one which best suits your needs (you will be
-able to make changes after the installation). A sample of the chosen
-configuration is shown in the monitor picture.");
-}
-sub configureX_xfree_and_glx() {
-    N("In the situation where different servers are available for your card, with
-or without 3D acceleration, you're asked to choose the server which best
-suits your needs.");
-}
-sub configureXxdm() {
-    N("Options
-
-   This steps allows you to choose whether you want your machine to
-automatically switch to a graphical interface at boot. Obviously, you may
-want to check \"%s\" if your machine is to act as a server, or if you were
-not successful in getting the display configured.", N("No"));
-}
-sub doPartitionDisks() {
-    N("You now need to decide where you want to install the Mandriva Linux
-operating system on your hard drive. If your hard drive is empty or if an
-existing operating system is using all the available space you will have to
-partition the drive. Basically, partitioning a hard drive means to
-logically divide it to create the space needed to install your new
-Mandriva Linux system.
-
-Because the process of partitioning a hard drive is usually irreversible
-and can lead to data losses, partitioning can be intimidating and stressful
-for the inexperienced user. Fortunately, DrakX includes a wizard which
-simplifies this process. Before continuing with this step, read through the
-rest of this section and above all, take your time.
-
-Depending on the configuration of your hard drive, several options are
-available:
-
- * \"%s\". This option will perform an automatic partitioning of your blank
-drive(s). If you use this option there will be no further prompts.
-
- * \"%s\". The wizard has detected one or more existing Linux partitions on
-your hard drive. If you want to use them, choose this option. You will then
-be asked to choose the mount points associated with each of the partitions.
-The legacy mount points are selected by default, and for the most part it's
-a good idea to keep them.
-
- * \"%s\". If Microsoft Windows is installed on your hard drive and takes
-all the space available on it, you will have to create free space for
-GNU/Linux. To do so, you can delete your Microsoft Windows partition and
-data (see ``Erase entire disk'' solution) or resize your Microsoft Windows
-FAT or NTFS partition. Resizing can be performed without the loss of any
-data, provided you've previously defragmented the Windows partition.
-Backing up your data is strongly recommended. Using this option is
-recommended if you want to use both Mandriva Linux and Microsoft Windows on
-the same computer.
-
-   Before choosing this option, please understand that after this
-procedure, the size of your Microsoft Windows partition will be smaller
-than when you started. You'll have less free space under Microsoft Windows
-to store your data or to install new software.
-
- * \"%s\". If you want to delete all data and all partitions present on
-your hard drive and replace them with your new Mandriva Linux system, choose
-this option. Be careful, because you will not be able to undo this operation
-after you confirm.
-
-   !! If you choose this option, all data on your disk will be deleted. !!
-
- * \"%s\". This option appears when the hard drive is entirely taken by
-Microsoft Windows. Choosing this option will simply erase everything on the
-drive and begin fresh, partitioning everything from scratch.
-
-   !! If you choose this option, all data on your disk will be lost. !!
-
- * \"%s\". Choose this option if you want to manually partition your hard
-drive. Be careful -- it is a powerful but dangerous choice and you can very
-easily lose all your data. That's why this option is really only
-recommended if you have done something like this before and have some
-experience. For more instructions on how to use the DiskDrake utility,
-refer to the ``Managing Your Partitions'' section in the ``Starter Guide''.", N("Use free space"), N("Use existing partition"), N("Use the free space on the Windows partition"), N("Erase entire disk"), N("Remove Windows"), N("Custom disk partitioning"));
-}
-sub exitInstall() {
-    N("There you are. Installation is now complete and your GNU/Linux system is
-ready to be used. Just click on \"%s\" to reboot the system. Do not forget
-to remove the installation media (CD-ROM or floppy). The first thing you
-should see after your computer has finished doing its hardware tests is the
-boot-loader menu, giving you the choice of which operating system to start.
-
-The \"%s\" button shows two more buttons to:
-
- * \"%s\": enables you to create an installation floppy disk which will
-automatically perform a whole installation without the help of an operator,
-similar to the installation you've just configured.
-
-   Note that two different options are available after clicking on that
-button:
-
-    * \"%s\". This is a partially automated installation. The partitioning
-step is the only interactive procedure.
-
-    * \"%s\". Fully automated installation: the hard disk is completely
-rewritten, all data is lost.
-
-   This feature is very handy when installing on a number of similar
-machines. See the Auto install section on our web site for more
-information.
-
- * \"%s\"(*): saves a list of the packages selected in this installation.
-To use this selection with another installation, insert the floppy and
-start the installation. At the prompt, press the [F1] key, type >>linux
-defcfg=\"floppy\"<< and press the [Enter] key.
-
-(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type
-\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat
-/dev/fd0\".", N("Reboot"), N("Advanced"), N("Generate auto-install floppy"), N("Replay"), N("Automated"), N("Save packages selection"));
-}
-sub formatPartitions() {
-    N("If you chose to reuse some legacy GNU/Linux partitions, you may wish to
-reformat some of them and erase any data they contain. To do so, please
-select those partitions as well.
-
-Please note that it's not necessary to reformat all pre-existing
-partitions. You must reformat the partitions containing the operating
-system (such as \"/\", \"/usr\" or \"/var\") but you do not have to reformat
-partitions containing data that you wish to keep (typically \"/home\").
-
-Please be careful when selecting partitions. After the formatting is
-completed, all data on the selected partitions will be deleted and you
-will not be able to recover it.
-
-Click on \"%s\" when you're ready to format the partitions.
-
-Click on \"%s\" if you want to choose another partition for your new
-Mandriva Linux operating system installation.
-
-Click on \"%s\" if you wish to select partitions which will be checked for
-bad blocks on the disk.", N("Next"), N("Previous"), N("Advanced"));
-}
-sub installUpdates() {
-    N("By the time you install Mandriva Linux, it's likely that some packages will
-have been updated since the initial release. Bugs may have been fixed,
-security issues resolved. To allow you to benefit from these updates,
-you're now able to download them from the Internet. Check \"%s\" if you
-have a working Internet connection, or \"%s\" if you prefer to install
-updated packages later.
-
-Choosing \"%s\" will display a list of web locations from which updates can
-be retrieved. You should choose one near to you. A package-selection tree
-will appear: review the selection, and press \"%s\" to retrieve and install
-the selected package(s), or \"%s\" to abort.", N("Yes"), N("No"), N("Yes"), N("Install"), N("Cancel"));
-}
-sub miscellaneous() {
-    N("At this point, DrakX will allow you to choose the security level you desire
-for your machine. As a rule of thumb, the security level should be set
-higher if the machine is to contain crucial data, or if it's to be directly
-exposed to the Internet. The trade-off that a higher security level is
-generally obtained at the expense of ease of use.
-
-If you do not know what to choose, keep the default option. You'll be able
-to change it later with the draksec tool, which is part of Mandriva Linux
-Control Center.
-
-Fill the \"%s\" field with the e-mail address of the person responsible for
-security. Security messages will be sent to that address.", N("Security Administrator"));
-}
-sub partition_with_diskdrake() {
-    N("At this point, you need to choose which partition(s) will be used for the
-installation of your Mandriva Linux system. If partitions have already been
-defined, either from a previous installation of GNU/Linux or by another
-partitioning tool, you can use existing partitions. Otherwise, hard drive
-partitions must be defined.
-
-To create partitions, you must first select a hard drive. You can select
-the disk for partitioning by clicking on ``hda'' for the first IDE drive,
-``hdb'' for the second, ``sda'' for the first SCSI drive and so on.
-
-To partition the selected hard drive, you can use these options:
-
- * \"%s\": this option deletes all partitions on the selected hard drive
-
- * \"%s\": this option enables you to automatically create ext3 and swap
-partitions in the free space of your hard drive
-
-\"%s\": gives access to additional features:
-
- * \"%s\": saves the partition table to a floppy. Useful for later
-partition-table recovery if necessary. It is strongly recommended that you
-perform this step.
-
- * \"%s\": allows you to restore a previously saved partition table from a
-floppy disk.
-
- * \"%s\": if your partition table is damaged, you can try to recover it
-using this option. Please be careful and remember that it does not always
-work.
-
- * \"%s\": discards all changes and reloads the partition table that was
-originally on the hard drive.
-
- * \"%s\": un-checking this option will force users to manually mount and
-unmount removable media such as floppies and CD-ROMs.
-
- * \"%s\": use this option if you wish to use a wizard to partition your
-hard drive. This is recommended if you do not have a good understanding of
-partitioning.
-
- * \"%s\": use this option to cancel your changes.
-
- * \"%s\": allows additional actions on partitions (type, options, format)
-and gives more information about the hard drive.
-
- * \"%s\": when you are finished partitioning your hard drive, this will
-save your changes back to disk.
-
-When defining the size of a partition, you can finely set the partition
-size by using the Arrow keys of your keyboard.
-
-Note: you can reach any option using the keyboard. Navigate through the
-partitions using [Tab] and the [Up/Down] arrows.
-
-When a partition is selected, you can use:
-
- * Ctrl-c to create a new partition (when an empty partition is selected)
-
- * Ctrl-d to delete a partition
-
- * Ctrl-m to set the mount point
-
-To get information about the different file system types available, please
-read the ext2FS chapter from the ``Reference Manual''.
-
-If you are installing on a PPC machine, you will want to create a small HFS
-``bootstrap'' partition of at least 1MB which will be used by the yaboot
-bootloader. If you opt to make the partition a bit larger, say 50MB, you
-may find it a useful place to store a spare kernel and ramdisk images for
-emergency boot situations.", N("Clear all"), N("Auto allocate"), N("More"), N("Save partition table"), N("Restore partition table"), N("Rescue partition table"), N("Reload partition table"), N("Removable media auto-mounting"), N("Wizard"), N("Undo"), N("Toggle between normal/expert mode"), N("Done"));
-}
-sub resizeFATChoose() {
-    N("More than one Microsoft partition has been detected on your hard drive.
-Please choose the one which you want to resize in order to install your new
-Mandriva Linux operating system.
-
-Each partition is listed as follows: \"Linux name\", \"Windows name\"
-\"Capacity\".
-
-\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",
-\"partition number\" (for example, \"hda1\").
-
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and
-\"sd\" if it is a SCSI hard drive.
-
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
-hard drives:
-
- * \"a\" means \"master hard drive on the primary IDE controller\";
-
- * \"b\" means \"slave hard drive on the primary IDE controller\";
-
- * \"c\" means \"master hard drive on the secondary IDE controller\";
-
- * \"d\" means \"slave hard drive on the secondary IDE controller\".
-
-With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means
-\"second lowest SCSI ID\", etc.
-
-\"Windows name\" is the letter of your hard drive under Windows (the first
-disk or partition is called \"C:\").");
-}
-sub selectCountry() {
-    N("\"%s\": check the current country selection. If you're not in this country,
-click on the \"%s\" button and choose another. If your country is not in the
-list shown, click on the \"%s\" button to get the complete country list.", N("Country / Region"), N("Configure"), N("More"));
-}
-sub selectInstallClass() {
-    N("This step is activated only if an existing GNU/Linux partition has been
-found on your machine.
-
-DrakX now needs to know if you want to perform a new installation or an
-upgrade of an existing Mandriva Linux system:
-
- * \"%s\". For the most part, this completely wipes out the old system.
-However, depending on your partitioning scheme, you can prevent some of
-your existing data (notably \"home\" directories) from being over-written.
-If you wish to change how your hard drives are partitioned, or to change
-the file system, you should use this option.
-
- * \"%s\". This installation class allows you to update the packages
-currently installed on your Mandriva Linux system. Your current partitioning
-scheme and user data will not be altered. Most of the other configuration
-steps remain available and are similar to a standard installation.
-
-Using the ``Upgrade'' option should work fine on Mandriva Linux systems
-running version \"8.1\" or later. Performing an upgrade on versions prior
-to Mandriva Linux version \"8.1\" is not recommended.", N("Install"), N("Upgrade"));
-}
-sub selectKeyboard() {
-    N("Depending on the language you chose (), DrakX will automatically select a
-particular type of keyboard configuration. Check that the selection suits
-you or choose another keyboard layout.
-
-Also, you may not have a keyboard which corresponds exactly to your
-language: for example, if you are an English-speaking Swiss native, you may
-have a Swiss keyboard. Or if you speak English and are located in Quebec,
-you may find yourself in the same situation where your native language and
-country-set keyboard do not match. In either case, this installation step
-will allow you to select an appropriate keyboard from a list.
-
-Click on the \"%s\" button to be shown a list of supported keyboards.
-
-If you choose a keyboard layout based on a non-Latin alphabet, the next
-dialog will allow you to choose the key binding which will switch the
-keyboard between the Latin and non-Latin layouts.", N("More"));
-}
-sub selectLanguage() {
-    N("The first step is to choose your preferred language.
-
-Your choice of preferred language will affect the installer, the
-documentation, and the system in general. First select the region you're
-located in, then the language you speak.
-
-Clicking on the \"%s\" button will allow you to select other languages to
-be installed on your workstation, thereby installing the language-specific
-files for system documentation and applications. For example, if Spanish
-users are to use your machine, select English as the default language in
-the tree view and \"%s\" in the Advanced section.
-
-About UTF-8 (unicode) support: Unicode is a new character encoding meant to
-cover all existing languages. However full support for it in GNU/Linux is
-still under development. For that reason, Mandriva Linux's use of UTF-8 will
-depend on the user's choices:
-
- * If you choose a language with a strong legacy encoding (latin1
-languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most
-iso-8859-2 languages), the legacy encoding will be used by default;
-
- * Other languages will use unicode by default;
-
- * If two or more languages are required, and those languages are not using
-the same encoding, then unicode will be used for the whole system;
-
- * Finally, unicode can also be forced for use throughout the system at a
-user's request by selecting the \"%s\" option independently of which
-languages were been chosen.
-
-Note that you're not limited to choosing a single additional language. You
-may choose several, or even install them all by selecting the \"%s\" box.
-Selecting support for a language means translations, fonts, spell checkers,
-etc. will also be installed for that language.
-
-To switch between the various languages installed on your system, you can
-launch the \"localedrake\" command as \"root\" to change the language used
-by the entire system. Running the command as a regular user will only
-change the language settings for that particular user.", N("Advanced"), N("Espanol"), N("Use Unicode by default"), N("All languages"));
-}
-sub selectMouse() {
-    N("Usually, DrakX has no problems detecting the number of buttons on your
-mouse. If it does, it assumes you have a two-button mouse and will
-configure it for third-button emulation. The third-button mouse button of a
-two-button mouse can be obtained by simultaneously clicking the left and
-right mouse buttons. DrakX will automatically know whether your mouse uses
-a PS/2, serial or USB interface.
-
-If you have a 3-button mouse without a wheel, you can choose a \"%s\"
-mouse. DrakX will then configure your mouse so that you can simulate the
-wheel with it: to do so, press the middle button and move your mouse
-pointer up and down.
-
-If for some reason you wish to specify a different type of mouse, select it
-from the list provided.
-
-You can select the \"%s\" entry to chose a ``generic'' mouse type which
-will work with nearly all mice.
-
-If you choose a mouse other than the default one, a test screen will be
-displayed. Use the buttons and wheel to verify that the settings are
-correct and that the mouse is working correctly. If the mouse is not
-working well, press the space bar or [Return] key to cancel the test and
-you will be returned to the mouse list.
-
-Occasionally wheel mice are not detected automatically, so you will need to
-select your mouse from a list. Be sure to select the one corresponding to
-the port that your mouse is attached to. After selecting a mouse and
-pressing the \"%s\" button, a mouse image will be displayed on-screen.
-Scroll the mouse wheel to ensure that it is activating correctly. As you
-scroll your mouse wheel, you will see the on-screen scroll wheel moving.
-Test the buttons and check that the mouse pointer moves on-screen as you
-move your mouse about.", N("with Wheel emulation"), N("Universal | Any PS/2 & USB mice"), N("Next"));
-}
-sub selectSerialPort() {
-    N("Please select the correct port. For example, the \"COM1\" port under
-Windows is named \"ttyS0\" under GNU/Linux.");
-}
-sub setRootPassword() {
-    N("This is the most crucial decision point for the security of your GNU/Linux
-system: you must enter the \"root\" password. \"Root\" is the system
-administrator and is the only user authorized to make updates, add users,
-change the overall system configuration, and so on. In short, \"root\" can
-do everything! That's why you must choose a password which is difficult to
-guess: DrakX will tell you if the password you chose is too simple. As you
-can see, you're not forced to enter a password, but we strongly advise
-against this. GNU/Linux is just as prone to operator error as any other
-operating system. Since \"root\" can overcome all limitations and
-unintentionally erase all data on partitions by carelessly accessing the
-partitions themselves, it is important that it be difficult to become
-\"root\".
-
-The password should be a mixture of alphanumeric characters and at least 8
-characters long. Never write down the \"root\" password -- it makes it far
-too easy to compromise your system.
-
-One caveat: do not make the password too long or too complicated because you
-must be able to remember it!
-
-The password will not be displayed on screen as you type it. To reduce the
-chance of a blind typing error you'll need to enter the password twice. If
-you do happen to make the same typing error twice, you'll have to use this
-``incorrect'' password the first time you'll try to connect as \"root\".
-
-If you want an authentication server to control access to your computer,
-click on the \"%s\" button.
-
-If your network uses either LDAP, NIS, or PDC Windows Domain authentication
-services, select the appropriate one for \"%s\". If you do not know which
-one to use, you should ask your network administrator.
-
-If you happen to have problems with remembering passwords, or if your
-computer will never be connected to the Internet and you absolutely trust
-everybody who uses your computer, you can choose to have \"%s\".", N("Advanced"), N("authentication"), N("No password"));
-}
-sub setupBootloaderBeginner() {
-    N("A boot loader is a little program which is started by the computer at boot
-time. It's responsible for starting up the whole system. Normally, the boot
-loader installation is totally automated. DrakX will analyze the disk boot
-sector and act according to what it finds there:
-
- * if a Windows boot sector is found, it will replace it with a GRUB/LILO
-boot sector. This way you'll be able to load either GNU/Linux or any other
-OS installed on your machine.
-
- * if a GRUB or LILO boot sector is found, it'll replace it with a new one.
-
-If DrakX can not determine where to place the boot sector, it'll ask you
-where it should place it. Generally, the \"%s\" is the safest place.
-Choosing \"%s\" will not install any boot loader. Use this option only if you
-know what you're doing.", N("First sector of drive (MBR)"), N("Skip"));
-}
-sub setupDefaultSpooler() {
-    N("Now, it's time to select a printing system for your computer. Other
-operating systems may offer you one, but Mandriva Linux offers two. Each of
-the printing systems is best suited to particular types of configuration.
-
- * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice
-if you have a direct connection to your printer, you want to be able to
-panic out of printer jams, and you do not have networked printers. (\"%s\"
-will handle only very simple network cases and is somewhat slow when used
-within networks.) It's recommended that you use \"pdq\" if this is your
-first experience with GNU/Linux.
-
- * \"%s\" stands for `` Common Unix Printing System'' and is an excellent
-choice for printing to your local printer or to one halfway around the
-planet. It's simple to configure and can act as a server or a client for
-the ancient \"lpd\" printing system, so it's compatible with older
-operating systems which may still need print services. While quite
-powerful, the basic setup is almost as easy as \"pdq\". If you need to
-emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.
-\"%s\" includes graphical front-ends for printing or choosing printer
-options and for managing the printer.
-
-If you make a choice now, and later find that you do not like your printing
-system you may change it by running PrinterDrake from the Mandriva Linux
-Control Center and clicking on the \"%s\" button.", N("pdq"), N("pdq"), N("CUPS"), N("CUPS"), N("Expert"));
-}
-sub setupSCSI() {
-    N("DrakX will first detect any IDE devices present in your computer. It will
-also scan for one or more PCI SCSI cards on your system. If a SCSI card is
-found, DrakX will automatically install the appropriate driver.
-
-Because hardware detection is not foolproof, DrakX may fail in detecting
-your hard drives. If so, you'll have to specify your hardware by hand.
-
-If you had to manually specify your PCI SCSI adapter, DrakX will ask if you
-want to configure options for it. You should allow DrakX to probe the
-hardware for the card-specific options which are needed to initialize the
-adapter. Most of the time, DrakX will get through this step without any
-issues.
-
-If DrakX is not able to probe for the options to automatically determine
-which parameters need to be passed to the hardware, you'll need to manually
-configure the driver.");
-}
-sub sound_config() {
-    N("\"%s\": if a sound card is detected on your system, it'll be displayed
-here. If you notice the sound card is not the one actually present on your
-system, you can click on the button and choose a different driver.", N("Sound card"));
-}
-sub summary() {
-    N("As a review, DrakX will present a summary of information it has gathered
-about your system. Depending on the hardware installed on your machine, you
-may have some or all of the following entries. Each entry is made up of the
-hardware item to be configured, followed by a quick summary of the current
-configuration. Click on the corresponding \"%s\" button to make the change.
-
- * \"%s\": check the current keyboard map configuration and change it if
-necessary.
-
- * \"%s\": check the current country selection. If you're not in this
-country, click on the \"%s\" button and choose another. If your country
-is not in the list shown, click on the \"%s\" button to get the complete
-country list.
-
- * \"%s\": by default, DrakX deduces your time zone based on the country
-you have chosen. You can click on the \"%s\" button here if this is not
-correct.
-
- * \"%s\": verify the current mouse configuration and click on the button
-to change it if necessary.
-
- * \"%s\": clicking on the \"%s\" button will open the printer
-configuration wizard. Consult the corresponding chapter of the ``Starter
-Guide'' for more information on how to set up a new printer. The interface
-presented in our manual is similar to the one used during installation.
-
- * \"%s\": if a sound card is detected on your system, it'll be displayed
-here. If you notice the sound card is not the one actually present on your
-system, you can click on the button and choose a different driver.
-
- * \"%s\": if you have a TV card, this is where information about its
-configuration will be displayed. If you have a TV card and it is not
-detected, click on \"%s\" to try to configure it manually.
-
- * \"%s\": you can click on \"%s\" to change the parameters associated with
-the card if you feel the configuration is wrong.
-
- * \"%s\": by default, DrakX configures your graphical interface in
-\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on
-\"%s\" to reconfigure your graphical interface.
-
- * \"%s\": if you wish to configure your Internet or local network access,
-you can do so now. Refer to the printed documentation or use the
-Mandriva Linux Control Center after the installation has finished to benefit
-from full in-line help.
-
- * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine
-you're installing on is to be located behind a proxy server.
-
- * \"%s\": this entry allows you to redefine the security level as set in a
-previous step ().
-
- * \"%s\": if you plan to connect your machine to the Internet, it's a good
-idea to protect yourself from intrusions by setting up a firewall. Consult
-the corresponding section of the ``Starter Guide'' for details about
-firewall settings.
-
- * \"%s\": if you wish to change your bootloader configuration, click this
-button. This should be reserved to advanced users. Refer to the printed
-documentation or the in-line help about bootloader configuration in the
-Mandriva Linux Control Center.
-
- * \"%s\": through this entry you can fine tune which services will be run
-on your machine. If you plan to use this machine as a server it's a good
-idea to review this setup.", N("Configure"), N("Keyboard"), N("Country / Region"), N("Configure"), N("More"), N("Timezone"), N("Configure"), N("Mouse"), N("Printer"), N("Configure"), N("Sound card"), N("TV card"), N("Configure"), N("ISDN card"), N("Configure"), N("Graphical Interface"), N("Configure"), N("Network"), N("Proxies"), N("Security Level"), N("Firewall"), N("Bootloader"), N("Services"));
-}
-sub takeOverHdChoose() {
-    N("Choose the hard drive you want to erase in order to install your new
-Mandriva Linux partition. Be careful, all data on this drive will be lost
-and will not be recoverable!");
-}
-sub takeOverHdConfirm() {
-    N("Click on \"%s\" if you want to delete all data and partitions present on
-this hard drive. Be careful, after clicking on \"%s\", you will not be able
-to recover any data and partitions present on this hard drive, including
-any Windows data.
-
-Click on \"%s\" to quit this operation without losing data and partitions
-present on this hard drive.", N("Next ->"), N("Next ->"), N("<- Previous"));
-}
diff --git a/perl-install/http.pm b/perl-install/http.pm
deleted file mode 100644
index dec3773a8..000000000
--- a/perl-install/http.pm
+++ /dev/null
@@ -1,50 +0,0 @@
-package http; # $Id$
-
-use IO::Socket;
-use network::network;
-
-my $sock;
-
-sub getFile {
-    local ($^W) = 0;
-
-    my ($url) = @_;
-    $sock->close if $sock;
-    $url =~ m|/XXX$| and return; #- force closing connection.
-
-    # can be used for ftp urls (with http proxy)
-    my ($host, $port, $path) = $url =~ m,^(?:http|ftp)://([^/:]+)(?::(\d+))?(/\S*)?$,;
-    defined $host or return undef;
-
-    my $use_http_proxy = $ENV{PROXY} && $ENV{PROXYPORT};
-
-    $sock = IO::Socket::INET->new(PeerAddr => $use_http_proxy ? $ENV{PROXY} : $host,
-				  PeerPort => $use_http_proxy ? $ENV{PROXYPORT} : $port || 80,
-				  Proto    => 'tcp',
-				  Timeout  => 60) or die "can not connect $@";
-    $sock->autoflush;
-    print $sock join("\015\012" =>
-		     "GET " . ($use_http_proxy ? $url : $path) . " HTTP/1.0",
-		     "Host: $host" . ($port && ":$port"),
-		     "User-Agent: DrakX/vivelinuxabaszindozs",
-		     "", "");
-
-    #- skip until empty line
-    my $now = 0;
-    my ($last, $buf, $tmp);
-    my $read = sub { sysread($sock, $buf, 1) or die ''; $tmp .= $buf };
-    do {
-	$last = $now;
-	&$read; &$read if $buf =~ /\015/;
-	$now = $buf =~ /\012/;
-    } until $now && $last;
-
-    if ($tmp =~ /^(.*\b(\d+)\b.*)/ && $2 == 200) {
-        $sock;
-    } else {
-	log::l("HTTP error: $1");
-        undef;
-    }
-}
-
-1;
diff --git a/perl-install/install2 b/perl-install/install2
deleted file mode 100755
index bcea68225..000000000
--- a/perl-install/install2
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/usr/bin/perl
-#- PERL_INSTALL_TEST is used to launch stage2 in debug mode
-
-#- Mandrake Graphic Install $Id$
-#- Copyright (C) 1999/2000 Mandrakesoft (pixel@mandrakesoft.com)
-#-
-#- This program is free software; you can redistribute it and/or modify
-#- it under the terms of the GNU General Public License as published by
-#- the Free Software Foundation; either version 2, or (at your option)
-#- any later version.
-#-
-#- This program is distributed in the hope that it will be useful,
-#- but WITHOUT ANY WARRANTY; without even the implied warranty of
-#- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#- GNU General Public License for more details.
-#-
-#- You should have received a copy of the GNU General Public License
-#- along with this program; if not, write to the Free Software
-#- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-use diagnostics;
-use strict;
-
-BEGIN {
-    #- for testing purpose
-    (my $f = __FILE__) =~ s|install2$|list_modules.pm|;
-    -e $f or symlink '../kernel/list_modules.pm', $f;
-}
-
-use lib qw(/usr/bin/perl-install .);
-use install2;
-
-$::testing = $ENV{PERL_INSTALL_TEST};
-$::isStandalone = 0;
-
-install2::main(@ARGV);
-
-c::_exit(0);
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
deleted file mode 100644
index 3bcde1464..000000000
--- a/perl-install/install2.pm
+++ /dev/null
@@ -1,679 +0,0 @@
-package install2; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($o $version);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use steps;
-use common;
-use install_any qw(:all);
-use install_steps;
-use install_any;
-use lang;
-use keyboard;
-use mouse;
-use devices;
-use partition_table;
-use modules;
-use detect_devices;
-use run_program;
-use any;
-use log;
-use fs;
-
-
-#-#######################################################################################
-#-$O
-#-the big struct which contain, well everything (globals + the interactive methods ...)
-#-if you want to do a kickstart file, you just have to add all the required fields (see for example
-#-the variable $default)
-#-#######################################################################################
-$o = $::o = {
-#    bootloader => { linear => 0, message => 1, timeout => 5, restricted => 0 },
-#-    packages   => [ qw() ],
-    partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0 }, #-, readonly => 0 },
-    authentication => { md5 => 1, shadow => 1 },
-    locale         => { lang => 'en_US' },
-#-    isUpgrade    => 0,
-    toRemove     => [],
-    toSave       => [],
-#-    simple_themes => 1,
-
-    timezone => {
-#-                   timezone => "Europe/Paris",
-#-                   UTC      => 1,
-                },
-#-    superuser => { password => 'a', shell => '/bin/bash', realname => 'God' },
-#-    user => { name => 'foo', password => 'bar', home => '/home/foo', shell => '/bin/bash', realname => 'really, it is foo' },
-
-#-    keyboard => 'de',
-#-    display => "192.168.1.19:1",
-    steps        => \%steps::installSteps,
-    orderedSteps => \@steps::orderedInstallSteps,
-
-#- for the list of fields available for user and superuser, see @etc_pass_fields in install_steps.pm
-#-    intf => { eth0 => { DEVICE => "eth0", IPADDR => '1.2.3.4', NETMASK => '255.255.255.128' } },
-
-    netc => {},
-    intf => {},
-             
-#-step : the current one
-#-prefix
-#-mouse
-#-keyboard
-#-netc
-#-methods
-#-packages compss
-#-printer haveone entry(cf printer.pm)
-
-};
-
-
-sub installStepsCall {
-    my ($o, $auto, $fun, @args) = @_;
-    $fun = "install_steps::$fun" if $auto;
-    $o->$fun(@args);
-}
-
-#-######################################################################################
-#- Steps Functions
-#- each step function are called with two arguments : clicked(because if you are a
-#- beginner you can force the the step) and the entered number
-#-######################################################################################
-
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($_clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectLanguage', $ent_number == 1);
-}
-
-sub acceptLicense {
-    my ($_clicked, $_ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'acceptLicense');
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($clicked, $ent_number, $auto) = @_;
-
-    require pkgs;
-    my $first_time = $ent_number == 1;
-
-    installStepsCall($o, $auto, 'selectMouse', !$first_time || $clicked);
-
-    addToBeDone { mouse::write($o->do_pkgs, $o->{mouse}) if !$o->{isUpgrade} || $clicked } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($clicked, $_ent_number, $auto) = @_;
-
-    if (!$::testing && !$::uml_install) {
-	-d '/lib/modules/' . c::kernel_version() ||
-	  -s modules::cz_file() or die N("Can not access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)", modules::cz_file());
-    }
-
-    installStepsCall($o, $auto, 'setupSCSI', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($clicked, $_ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectKeyboard', $clicked);
-
-    #- read keyboard ASAP (so that summary displays ok)
-    addToBeDone {	
-	$o->{keyboard}{unsafe} or return;
-	if (my $keyboard = keyboard::read()) {
-	    $o->{keyboard} = $keyboard;
-	}
-    } 'formatPartitions';
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($clicked, $_ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'selectInstallClass', $clicked);
-
-    if ($o->{isUpgrade}) {
-	@{$o->{orderedSteps}} = uniq(map {
-	    $_ eq 'selectInstallClass' ? ($_, 'doPartitionDisks', 'formatPartitions') : $_;
-	} @{$o->{orderedSteps}});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($_clicked, $_ent_number, $auto) = @_;
-    $o->{steps}{formatPartitions}{done} = 0;
-    installStepsCall($o, $auto, 'doPartitionDisksBefore');
-    installStepsCall($o, $auto, 'doPartitionDisks');
-    installStepsCall($o, $auto, 'doPartitionDisksAfter');
-}
-
-sub formatPartitions {
-    my ($_clicked, $_ent_number, $auto) = @_;
-
-    $o->{steps}{choosePackages}{done} = 0;
-    installStepsCall($o, $auto, 'choosePartitionsToFormat', $o->{fstab}) if !$o->{isUpgrade};
-    my $want_root_formated = fs::get::root($o->{fstab})->{toFormat};
-    if ($want_root_formated) {
-	foreach ('/usr') {
-	    my $part = fs::get::mntpoint2part($_, $o->{fstab}) or next;
-	    $part->{toFormat} or die N("You must also format %s", $_);
-	}
-    }
-    installStepsCall($o, $auto, 'formatMountPartitions', $o->{fstab}) if !$::testing;
-
-    if ($want_root_formated) {
-	#- we formatted /, ensure /var/lib/rpm is cleaned otherwise bad things can happen
-	#- (especially when /var is *not* formatted)
-	eval { rm_rf("$o->{prefix}/var/lib/rpm") };
-    }
-
-    mkdir "$o->{prefix}/$_", 0755 foreach 
-      qw(dev etc etc/profile.d etc/rpm etc/sysconfig etc/sysconfig/console 
-	etc/sysconfig/network-scripts etc/sysconfig/console/consolefonts 
-	etc/sysconfig/console/consoletrans
-	home mnt tmp var var/tmp var/lib var/lib/rpm var/lib/urpmi);
-    mkdir "$o->{prefix}/$_", 0700 foreach qw(root root/tmp root/drakx);
-
-    devices::make("$o->{prefix}/dev/null");
-    chmod 0666, "$o->{prefix}/dev/null";
-
-    eval { fs::mount('none', "$o->{prefix}/proc", 'proc') };
-    eval { fs::mount('none', "$o->{prefix}/sys", 'sysfs') };
-    eval { fs::mount_usbfs($o->{prefix}) };
-
-    install_any::screenshot_dir__and_move();
-    install_any::move_clp_to_disk();
-
-    any::rotate_logs($o->{prefix});
-
-    if (any { $_->{usb_media_type} && any { $_->{mntpoint} } partition_table::get_normal_parts($_) } @{$o->{all_hds}{hds}}) {
-	log::l("we use a usb-storage based drive, so keep it as a normal scsi_hostadapter");
-    } else {
-	log::l("we do not need usb-storage for booting system, rely on hotplug");
-	#- when usb-storage is in scsi_hostadapter, 
-	#- hotplug + scsimon do not load sd_mod/sr_mod when needed
-	#- (eg: when plugging a usb key)
-	$o->{modules_conf}->remove_probeall('scsi_hostadapter', 'usb-storage');
-    }
-
-    require raid;
-    raid::prepare_prefixed($o->{all_hds}{raids});
-
-    #- needed by lilo
-    if (my @vgs = map { $_->{VG_name} } @{$o->{all_hds}{lvms}}) {
-	cp_af("/dev/$_", "$::prefix/dev") foreach 'mapper', @vgs;
-    }
-}
-
-#------------------------------------------------------------------------------
-sub choosePackages {
-    my ($_clicked, $ent_number, $auto) = @_;
-    require pkgs;
-
-    #- always setPackages as it may have to copy hdlist and synthesis files.
-    installStepsCall($o, $auto, 'setPackages', $o->{isUpgrade} && $ent_number == 1);
-    installStepsCall($o, $auto, 'choosePackages', $o->{packages}, $o->{compssUsers}, $ent_number == 1);
-    my @flags = map_each { if_($::b, $::a) } %{$o->{rpmsrate_flags_chosen}};
-    log::l("rpmsrate_flags_chosen's: ", join(' ', sort @flags));
-
-    #- check pre-condition that basesystem package must be selected.
-    pkgs::packageByName($o->{packages}, 'basesystem')->flag_available or die "basesystem package not selected";
-
-    #- check if there are packages that need installation.
-    $o->{steps}{installPackages}{done} = 0 if $o->{steps}{installPackages}{done} && pkgs::packagesToInstall($o->{packages}) > 0;
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($_clicked, $ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'readBootloaderConfigBeforeInstall') if $ent_number == 1;
-
-    installStepsCall($o, $auto, 'beforeInstallPackages');
-    installStepsCall($o, $auto, 'installPackages');
-    installStepsCall($o, $auto, 'afterInstallPackages');
-}
-#------------------------------------------------------------------------------
-sub miscellaneous {
-    my ($clicked, $_ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'miscellaneousBefore', $clicked);
-    installStepsCall($o, $auto, 'miscellaneous', $clicked);
-    installStepsCall($o, $auto, 'miscellaneousAfter', $clicked);
-}
-
-#------------------------------------------------------------------------------
-sub summary {
-    my ($_clicked, $ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'summaryBefore');
-    installStepsCall($o, $auto, 'summary', $ent_number == 1);
-    installStepsCall($o, $auto, 'summaryAfter');
-}
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($_clicked, $_ent_number, $auto) = @_;
-    #- get current configuration of network device.
-    require network::network;
-    eval { network::network::read_all_conf($o->{prefix}, $o->{netc}, $o->{intf}) };
-    installStepsCall($o, $auto, 'configureNetwork') if !$o->{isUpgrade};
-}
-#------------------------------------------------------------------------------
-sub installUpdates {
-    my ($_clicked, $_ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'installUpdates') if $o->{meta_class} ne 'firewall';
-}
-#------------------------------------------------------------------------------
-sub configureServices {
-    my ($clicked, $_ent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'configureServices', $clicked);
-}
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($clicked, $_ent_number, $auto) = @_;
-    return if $o->{isUpgrade};
-
-    installStepsCall($o, $auto, 'setRootPassword', $clicked);
-}
-#------------------------------------------------------------------------------
-sub addUser {
-    my ($clicked, $_ent_number, $auto) = @_;
-
-    installStepsCall($o, $auto, 'addUser', $clicked) if !$o->{isUpgrade};
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
-    my ($_clicked, $ent_number, $auto) = @_;
-    return if $::uml_install;
-
-    $o->{modules_conf}->write;
-
-    installStepsCall($o, $auto, 'setupBootloaderBefore') if $ent_number == 1;
-    installStepsCall($o, $auto, 'setupBootloader', $ent_number);
-
-    eval { install_any::set_security($o) };
-}
-#------------------------------------------------------------------------------
-sub configureX {
-    my ($_clicked, $_ent_number, $auto) = @_;
-
-    #- done here and also at the end of install2.pm, just in case...
-    install_any::write_fstab($o);
-    $o->{modules_conf}->write;
-
-    require pkgs;
-    installStepsCall($o, $auto, 'configureX') if !$::testing && eval { pkgs::packageByName($o->{packages}, 'xorg-x11')->flag_installed } && !$o->{X}{disabled};
-}
-#------------------------------------------------------------------------------
-sub exitInstall {
-    my ($_clicked, $_xent_number, $auto) = @_;
-    installStepsCall($o, $auto, 'exitInstall', getNextStep($::o) eq 'exitInstall');
-}
-
-sub start_i810fb() {
-    # keep the result otherwise monitor-edid does not return good results afterwards
-    eval { any::monitor_full_edid() };
-
-    my ($vga) = cat_('/proc/cmdline') =~ /vga=(\S+)/;
-    return if !$vga || listlength(cat_('/proc/fb'));
-
-    my %vga_to_xres = (0x311 => '640', 0x314 => '800', 0x317 => '1024');
-    my $xres = $vga_to_xres{$vga} || '800';
-
-    log::l("trying to load i810fb module with xres <$xres> (vga was <$vga>)");
-    eval { modules::load('intel-agp') };
-    eval {
-	my $opt = "xres=$xres hsync1=32 hsync2=48 vsync1=50 vsync2=70 vram=2 bpp=16 accel=1 mtrr=1"; #- this sucking i810fb does not accept floating point numbers in hsync!
-	modules::load_with_options([ 'i810fb' ], { i810fb => $opt }); 
-    };
-}
-
-
-#-######################################################################################
-#- MAIN
-#-######################################################################################
-sub main {
-    $SIG{SEGV} = sub { 
-	my $msg = "segmentation fault: seems like memory is missing as the install crashes"; log::l($msg);
-	$o->ask_warn('', $msg);
-	setVirtual(1);
-	require install_steps_auto_install;
-	install_steps_auto_install_non_interactive::errorInStep($o, $msg);
-    };
-    $ENV{PERL_BADLANG} = 1;
-    $ENV{LD_ASSUME_KERNEL} = '2.4.1';
-    delete $ENV{TERMINFO};
-    umask 022;
-
-    $::isInstall = 1;
-    $::isWizard = 1;
-    $::no_ugtk_init = 1;
-    $::expert = 0;
-
-#-    c::unlimit_core() unless $::testing;
-
-    my ($cfg, $patch, @auto);
-    my %cmdline = map { 
-	my ($n, $v) = split /=/;
-	$n => $v || 1;
-    } split ' ', cat_("/proc/cmdline");
-
-    my $opt; foreach (@_) {
-	if (/^--?(.*)/) {
-	    $cmdline{$opt} = 1 if $opt;
-	    $opt = $1;
-	} else {
-	    $cmdline{$opt} = $_ if $opt;
-	    $opt = '';
-	}
-    } $cmdline{$opt} = 1 if $opt;
-
-    #- from stage1
-    put_in_hash(\%ENV, { getVarsFromSh('/tmp/env') });
-    exists $ENV{$_} and $cmdline{lc($_)} = $ENV{$_} foreach qw(METHOD PCMCIA KICKSTART);
-
-    map_each {
-	my ($n, $v) = @_;
-	my $f = ${{
-	    lang      => sub { $o->{locale}{lang} = $v },
-	    flang     => sub { $o->{locale}{lang} = $v; push @auto, 'selectLanguage' },
-	    method    => sub { $o->{method} = $v },
-	    pcmcia    => sub { $o->{pcmcia} = $v },
-	    vga16     => sub { $o->{vga16} = $v },
-	    vga       => sub { $o->{vga} = $v },
-	    step      => sub { $o->{steps}{first} = $v },
-	    meta_class => sub { $o->{meta_class} = $v },
-	    freedriver => sub { $o->{freedriver} = $v },
-	    no_bad_drives => sub { $o->{partitioning}{no_bad_drives} = 1 },
-	    readonly  => sub { $o->{partitioning}{readonly} = $v ne "0" },
-	    display   => sub { $o->{display} = $v },
-	    askdisplay => sub { print "Please enter the X11 display to perform the install on ? "; $o->{display} = chomp_(scalar(<STDIN>)) },
-	    security  => sub { $o->{security} = $v },
-	    noauto    => sub { $::noauto = 1 },
-	    testing   => sub { $::testing = 1 },
-	    patch     => sub { $patch = 1 },
-	    defcfg    => sub { $cfg = $v },
-	    newt      => sub { $o->{interactive} = "newt" },
-	    text      => sub { $o->{interactive} = "newt" },
-	    stdio     => sub { $o->{interactive} = "stdio" },
-	    kickstart => sub { $::auto_install = $v },
-	    uml_install => sub { $::uml_install = 1 },
-	    auto_install => sub { $::auto_install = $v },
-	    simple_themes => sub { $o->{simple_themes} = 1 },
-	    theme     => sub { $o->{theme} = $v },
-	    doc       => sub { $o->{doc} = 1 },  #- will be used to know that we're running for the doc team,
-	                                         #- e.g. we want screenshots with a good B&W contrast
-	    useless_thing_accepted => sub { $o->{useless_thing_accepted} = 1 },
-	    alawindows => sub { $o->{security} = 0; $o->{partitioning}{clearall} = 1; $o->{bootloader}{crushMbr} = 1 },
-	    fdisk => sub { $o->{partitioning}{fdisk} = 1 },
-	    nomouseprobe => sub { $o->{nomouseprobe} = $v },
-	    updatemodules => sub { $o->{updatemodules} = 1 },
-	    move  => sub { $::move = 1 },
-	    globetrotter  => sub { $::move = 1; $::globetrotter = 1 },
-	    suppl => sub { $o->{supplmedia} = 1 },
-	    askmedia => sub { $o->{askmedia} = 1 },
-	}}{lc $n}; &$f if $f;
-    } %cmdline;
-
-    if ($::testing) {
-	$ENV{SHARE_PATH} ||= "/export/install/stage2/live/usr/share";
-	$ENV{SHARE_PATH} = "/usr/share" if !-e $ENV{SHARE_PATH};
-    } else {
-	$ENV{SHARE_PATH} ||= "/usr/share";
-    }
-
-    undef $::auto_install if $cfg;
-    if (!$::testing) {
-	unlink $_ foreach "/modules/modules.mar", "/sbin/stage1";
-    }
-
-    log::openLog(($::testing || $o->{localInstall}) && 'debug.log');
-    log::l("second stage install running (", install_any::drakx_version(), ")");
-
-    eval { output('/proc/sys/kernel/modprobe', "\n") } if !$::testing; #- disable kmod, otherwise we get a different behaviour in kernel vs kernel-BOOT
-    eval { fs::mount('none', '/sys', 'sysfs', 1) };
-
-    if ($::move) {
-        require move;
-        move::init($o);
-    }
-
-    cp_f(glob('/stage1/tmp/*'), '/tmp');
-
-    #- free up stage1 memory
-    eval { fs::umount($_) } foreach qw(/stage1/proc/bus/usb /stage1/proc /stage1);
-
-    $o->{prefix} = $::prefix = $::testing ? "/tmp/test-perl-install" : $::move ? "" : "/mnt";
-    mkdir $o->{prefix}, 0755;
-
-    #-  make sure we do not pick up any gunk from the outside world
-    my $remote_path = "$o->{prefix}/sbin:$o->{prefix}/bin:$o->{prefix}/usr/sbin:$o->{prefix}/usr/bin:$o->{prefix}/usr/X11R6/bin";
-    $ENV{PATH} = "/usr/bin:/bin:/sbin:/usr/sbin:/usr/X11R6/bin:$remote_path";
-
-    eval { spawnShell() };
-
-    modules::load_dependencies(($::testing ? ".." : "") . "/modules/modules.dep");
-    require modules::any_conf;
-    require modules::modules_conf;
-    $o->{modules_conf} = modules::modules_conf::read(modules::any_conf::vnew(), '/tmp/modules.conf');
-    modules::read_already_loaded($o->{modules_conf});
-
-    #- done before auto_install is called to allow the -IP feature on auto_install file name
-    if (-e '/tmp/network') {
-	require network::network;
-	#- get stage1 network configuration if any.
-	log::l('found /tmp/network');
-	$o->{netc} ||= {};
-	add2hash($o->{netc}, network::network::read_conf('/tmp/network'));
-	if (my ($file) = glob_('/tmp/ifcfg-*')) {
-	    log::l("found network config file $file");
-	    my $l = network::network::read_interface_conf($file);
-	    $o->{intf}{$l->{DEVICE}} ||= $l;
-	}
-	if (-e '/etc/resolv.conf') {
-	    my $file = '/etc/resolv.conf';
-	    log::l("found network config file $file");
-	    add2hash($o->{netc}, network::network::read_resolv_conf($file));
-	}
-    }
-
-    #- done after module dependencies are loaded for "vfat depends on fat"
-    if ($::auto_install) {
-	if ($::auto_install =~ /-IP(\.pl)?$/) {
-	    my ($ip) = cat_('/tmp/stage1.log') =~ /configuring device (?!lo)\S+ ip: (\S+)/;
-	    my $normalized_ip = join('', map { sprintf "%02X", $_ } split('\.', $ip)); 
-	    $::auto_install =~ s/-IP(\.pl)?$/-$normalized_ip$1/;
-	}
-	require install_steps_auto_install;
-	eval { $o = $::o = install_any::loadO($o, $::auto_install) };
-	if ($@) {
-	    if ($o->{useless_thing_accepted}) { #- Pixel's hack to be able to fail through
-		log::l("error using auto_install, continuing");
-		undef $::auto_install;
-	    } else {
-		install_steps_auto_install_non_interactive::errorInStep($o, "Error using auto_install\n" . formatError($@));
-	    }
-	} else {
-	    log::l("auto install config file loaded successfully");
-
-	    #- normalize for people not using our special scheme
-	    foreach (@{$o->{manualFstab} || []}) {
-		$_->{device} =~ s!^/dev/!!;
-	    }
-	}
-    }
-    $o->{interactive} ||= 'gtk' if !$::auto_install;
- 
-    if ($o->{interactive} eq "gtk" && availableMemory() < 22 * 1024) {
- 	log::l("switching to newt install cuz not enough memory");
- 	$o->{interactive} = "newt";
-    }
-
-    if (my ($s) = cat_("/proc/cmdline") =~ /brltty=(\S*)/) {
-	my ($driver, $device, $table) = split(',', $s);
-	$table = "text.$table.tbl" if $table !~ /\.tbl$/;
-	log::l("brltty option $driver $device $table");
-	$o->{brltty} = { driver => $driver, device => $device, table => $table };
-	$o->{interactive} = 'newt';
-	$o->{nomouseprobe} = 1;
-    }
-
-    # perl_checker: require install_steps_gtk
-    # perl_checker: require install_steps_newt
-    # perl_checker: require install_steps_stdio
-    require "install_steps_$o->{interactive}.pm" if $o->{interactive};
-
-    #- needed before accessing floppy (in case of usb floppy)
-    modules::load_category($o->{modules_conf}, 'bus/usb'); 
-
-    #- oem patch should be read before to still allow patch or defcfg.
-    eval { $o = $::o = install_any::loadO($o, "install/patch-oem.pl"); log::l("successfully read oem patch") };
-    #- patch should be read after defcfg in order to take precedance.
-    eval { $o = $::o = install_any::loadO($o, $cfg); log::l("successfully read default configuration: $cfg") } if $cfg;
-    eval { $o = $::o = install_any::loadO($o, "patch"); log::l("successfully read patch") } if $patch;
-
-    eval { modules::load("af_packet") };
-
-    require harddrake::sound;
-    harddrake::sound::configure_sound_slots($o->{modules_conf});
-
-    #- need to be after oo-izing $o
-    if ($o->{brltty}) {
-	symlink "/tmp/stage2/$_", $_ foreach "/etc/brltty";
-	eval { modules::load("serial") };
-	devices::make($_) foreach $o->{brltty}{device} ? $o->{brltty}{device} : qw(ttyS0 ttyS1);
-	devices::make("vcsa");
-	run_program::run("brltty");
-    }
-
-    #- needed very early for install_steps_gtk
-    if (!$::testing) {
-	eval { $o->{mouse} = mouse::detect($o->{modules_conf}) } if !$o->{mouse} && !$o->{nomouseprobe};
-	mouse::load_modules($o->{mouse});
-    }
-
-    $o->{locale}{lang} = lang::set($o->{locale}) if $o->{locale}{lang} ne 'en_US' && !$::move; #- mainly for defcfg
-
-    start_i810fb();
-
-    $o->{allowFB} = listlength(cat_("/proc/fb"));
-
-    if (!$::move && !$::testing && !$o->{meta_class}) {
-	my $VERSION = cat__(install_any::getFile("VERSION")) or do { print "VERSION file missing\n"; sleep 5 };
-	my @classes = qw(powerpackplus powerpack desktop download server firewall);
-	if (my $meta_class = find { $VERSION =~ /$_/i } @classes) {
-	    $o->{meta_class} = $meta_class;
-	}
-	$o->{distro_type} = 'community' if $VERSION =~ /community/i;
-	$o->{distro_type} = 'cooker' if $VERSION =~ /cooker/i;
-    }
-    $o->{meta_class} eq 'discovery' and $o->{meta_class} = 'desktop';
-    $o->{meta_class} eq 'powerpackplus' and $o->{meta_class} = 'server';
-
-    log::l("meta_class $o->{meta_class}");
-
-    foreach (@auto) {
-	my $s = $o->{steps}{/::(.*)/ ? $1 : $_} or next;
-	$s->{auto} = $s->{hidden} = 1;
-    }
-
-    my $o_;
-    while (1) {
-    	$o_ = $::auto_install ?
-    	  install_steps_auto_install->new($o) :
-    	    $o->{interactive} eq "stdio" ?
-    	  install_steps_stdio->new($o) :
-    	    $o->{interactive} eq "newt" ?
-    	  install_steps_newt->new($o) :
-    	    $o->{interactive} eq "gtk" ?
-    	  install_steps_gtk->new($o) :
-    	    die "unknown install type";
-	$o_ and last;
-
-	$o->{interactive} = "newt";
-	require install_steps_newt;
-    }
-    $::o = $o = $o_;
-
-    eval { output('/proc/splash', "verbose\n") };
-  
-    #-the main cycle
-    my $clicked = 0;
-    MAIN: for ($o->{step} = $o->{steps}{first};; $o->{step} = getNextStep($o)) {
-	$o->{steps}{$o->{step}}{entered}++;
-	$o->enteringStep($o->{step});
-	eval {
-	    &{$install2::{$o->{step}}}($clicked || $o->{steps}{$o->{step}}{noauto},
-				       $o->{steps}{$o->{step}}{entered},
-				       $clicked ? 0 : $o->{steps}{$o->{step}}{auto});
-	};
-	my $err = $@;
-	$o->kill_action;
-	$clicked = 0;
-	if ($err) {
-	    local $_ = $err;
-	    $o->kill_action;
-	    if (!/^already displayed/) {
-		eval { $o->errorInStep($_) };
-		$o->{steps}{$o->{step}}{auto} = 0;
-		$err = $@;
-		$err and next;
-	    }
-	    $o->{step} = $o->{steps}{$o->{step}}{onError};
-	    next MAIN unless $o->{steps}{$o->{step}}{reachable}; #- sanity check: avoid a step not reachable on error.
-	    redo MAIN;
-	}
-	$o->{steps}{$o->{step}}{done} = 1;
-	$o->leavingStep($o->{step});
-
-	last if $o->{step} eq 'exitInstall';
-    }
-    unlink install_any::clp_on_disk();
-    install_any::clean_postinstall_rpms();
-    install_any::log_sizes($o);
-    install_any::remove_advertising($o);
-    install_any::write_fstab($o);
-    $o->{modules_conf}->write;
-    detect_devices::install_addons($o->{prefix});
-
-    #- mainly for auto_install's
-    #- do not use run_program::xxx because it does not leave stdin/stdout unchanged
-    system("bash", "-c", $o->{postInstallNonRooted}) if $o->{postInstallNonRooted};
-    system("chroot", $o->{prefix}, "bash", "-c", $o->{postInstall}) if $o->{postInstall};
-
-    install_any::ejectCdrom();
-
-    #- to ensure linuxconf does not cry against those files being in the future
-    foreach ('/etc/modules.conf', '/etc/crontab', '/etc/sysconfig/mouse', '/etc/sysconfig/network', '/etc/X11/fs/config') {
-	my $now = time() - 24 * 60 * 60;
-	utime $now, $now, "$o->{prefix}/$_";
-    }
-    install_any::killCardServices();
-
-    #- make sure failed upgrade will not hurt too much.
-    install_steps::cleanIfFailedUpgrade($o);
-
-    -e "$o->{prefix}/usr/sbin/urpmi.update" or eval { rm_rf("$o->{prefix}/var/lib/urpmi") };
-
-    #- copy latest log files
-    eval { cp_af("/tmp/$_", "$o->{prefix}/root/drakx") foreach qw(ddebug.log stage1.log) };
-
-    #- ala pixel? :-) [fpons]
-    common::sync(); common::sync();
-
-    log::l("installation complete, leaving");
-    log::l("files still open by install2: ", readlink($_)) foreach glob_("/proc/self/fd/*");
-    print "\n" x 80;
-}
-
-1;
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
deleted file mode 100644
index dec369cdc..000000000
--- a/perl-install/install_any.pm
+++ /dev/null
@@ -1,1869 +0,0 @@
-package install_any; # $Id$
-
-use strict;
-
-our @ISA = qw(Exporter);
-our %EXPORT_TAGS = (
-    all => [ qw(getNextStep spawnShell addToBeDone) ],
-);
-our @EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use run_program;
-use fs::type;
-use fs::format;
-use partition_table;
-use devices;
-use fsedit;
-use modules;
-use detect_devices;
-use lang;
-use any;
-use log;
-
-#- boot medium (the first medium to take into account).
-our $boot_medium = 1;
-our $current_medium = $boot_medium;
-our $asked_medium = $boot_medium;
-our @advertising_images;
-
-#- current ftp root (for getFile) �- XXX must store this per media
-our $global_ftp_prefix;
-
-sub drakx_version() { 
-    $::move ? sprintf "DrakX-move v%s", cat_('/usr/bin/stage2/move.pm') =~ /move\.pm,v (\S+ \S+ \S+)/
-	    : sprintf "DrakX v%s built %s", $::testing ? ('TEST', scalar gmtime()) : (split('/', cat__(getFile("install/stage2/VERSION"))))[2,3];
-}
-
-#-######################################################################################
-#- Media change variables&functions
-#-######################################################################################
-my $postinstall_rpms = '';
-my $cdrom;
-my %iso_images;
-
-sub mountCdrom {
-    my ($mountpoint, $o_cdrom) = @_;
-    $o_cdrom = $cdrom if !defined $o_cdrom;
-    eval { fs::mount($o_cdrom, $mountpoint, "iso9660", 'readonly') };
-}
-
-sub useMedium($) {
-    #- before ejecting the first CD, there are some files to copy!
-    #- does nothing if the function has already been called.
-    $_[0] > 1 and method_allows_medium_change($::o->{method}) and setup_postinstall_rpms($::prefix, $::o->{packages});
-
-    $asked_medium eq $_[0] or log::l("selecting new medium '$_[0]'");
-    $asked_medium = $_[0];
-}
-sub changeMedium($$) {
-    my ($method, $medium_name) = @_;
-    log::l("change to medium $medium_name for method $method (refused by default)");
-    0;
-}
-sub relGetFile($) {
-    local $_ = $_[0];
-    if (my ($arch) = m|\.([^\.]*)\.rpm$|) {
-	$_ = "$::o->{packages}{mediums}{$asked_medium}{rpmsdir}/$_";
-	s/%{ARCH}/$arch/g;
-	s,^/+,,g;
-    }
-    $_;
-}
-sub askChangeMedium($$) {
-    my ($method, $medium_name) = @_;
-    my $allow;
-    do {
-	local $::o->{method} = $method = 'cdrom' if $medium_name =~ /^\d+s$/; #- Suppl CD
-	eval { $allow = changeMedium($method, $medium_name) };
-    } while $@; #- really it is not allowed to die in changeMedium!!! or install will core with rpmlib!!!
-    log::l($allow ? "accepting medium $medium_name" : "refusing medium $medium_name");
-    $allow;
-}
-
-#- guess the CD number from a media description.
-#- XXX lots of heuristics here, must design this properly
-sub getCDNumber {
-    my ($description) = @_;
-    (my $cd) = $description =~ /\b(?:CD|DVD) ?(\d+)\b/i;
-    if (!$cd) { #- test for single unnumbered DVD
-	$cd = 1 if $description =~ /\bDVD\b/i;
-    }
-    if (!$cd) { #- test for mini-ISO
-	$cd = 1 if $description =~ /\bmini.?cd\b/i;
-    }
-    #- don't mix suppl. cds with regular ones
-    if ($description =~ /suppl/i) { $cd += 100 }
-    $cd;
-}
-
-sub method_is_from_ISO_images($) {
-    my ($method) = @_;
-    $method eq "disk-iso" || $method eq "nfs-iso";
-}
-sub method_allows_medium_change($) {
-    my ($method) = @_;
-    $method eq "cdrom" || method_is_from_ISO_images($method);
-}
-
-sub look_for_ISO_images() {
-    $iso_images{media} = [];
-
-    ($iso_images{loopdev}, $iso_images{mountpoint}) = cat_("/proc/mounts") =~ m|(/dev/loop\d+)\s+(/tmp/image) iso9660| or return;
-
-    my $get_iso_ids = sub {
-	my ($F) = @_;
-	my ($vol_id, $app_id) = c::get_iso_volume_ids(fileno $F);
-	#- the ISO volume names must end in -Disc\d+ if they are belong (!) to a set
-	my ($cd_set) = $vol_id =~ /^(.*)-disc\d+$/i;
-	#- else use the full volume name as CD set identifier
-	$cd_set ||= $vol_id;
-	{ cd_set => $cd_set, app_id => $app_id };
-    };
-
-    sysopen(my $F, $iso_images{loopdev}, 0) or return;
-    put_in_hash(\%iso_images, $get_iso_ids->($F));
-
-    my $iso_dir = $ENV{ISOPATH};
-    #- strip old root and remove iso file from path if present
-    $iso_dir =~ s!^/sysroot!!; $iso_dir =~ s![^/]*\.iso$!!;
-
-    foreach my $iso_file (glob("$iso_dir/*.iso")) {
-	my $iso_dev = devices::set_loop($iso_file) or return;
-	if (sysopen($F, $iso_dev, 0)) {
-	    my $iso_ids = $get_iso_ids->($F);
-	    push @{$iso_images{media}}, { file => $iso_file, %$iso_ids };
-	    close($F); #- needed to delete loop device
-	}
-	devices::del_loop($iso_dev);
-    }
-    1;
-}
-
-sub find_ISO_image_labelled($) {
-    %iso_images or look_for_ISO_images() or return;
-    my ($iso_label) = @_;
-    find { $_->{app_id} eq $iso_label && $_->{cd_set} eq $iso_images{cd_set} } @{$iso_images{media}};
-}
-
-sub changeIso($) {
-    my ($iso_label) = @_;
-    my $iso_info = find_ISO_image_labelled($iso_label) or return;
-
-    eval { fs::umount($iso_images{mountpoint}) };
-    $@ and warnAboutFilesStillOpen();
-    devices::del_loop($iso_images{loopdev});
-
-    $iso_images{loopdev} = devices::set_loop($iso_info->{file});
-    eval { 
-	fs::mount($iso_images{loopdev}, $iso_images{mountpoint}, "iso9660", 'readonly');
-	log::l("using ISO image '$iso_label'");
-	1;
-    };
-}
-
-sub errorOpeningFile($) {
-    my ($file) = @_;
-    $file eq 'XXX' and return; #- special case to force closing file after rpmlib transaction.
-    $current_medium eq $asked_medium and log::l("errorOpeningFile $file"), return; #- nothing to do in such case.
-    $::o->{packages}{mediums}{$asked_medium}{selected} or return; #- not selected means no need to worry about.
-    my $current_method = $::o->{packages}{mediums}{$asked_medium}{method} || $::o->{method};
-
-    my $max = 32; #- always refuse after $max tries.
-    if ($current_method eq "cdrom") {
-	cat_("/proc/mounts") =~ m,(/dev/\S+)\s+(/mnt/cdrom|/tmp/image),
-	    and ($cdrom, my $mountpoint) = ($1, $2);
-	return unless $cdrom;
-	ejectCdrom($cdrom, $mountpoint);
-	while ($max > 0 && askChangeMedium($current_method, $asked_medium)) {
-	    $current_medium = $asked_medium;
-	    mountCdrom("/tmp/image");
-	    my $getFile = getFile($file); 
-	    $getFile && @advertising_images and copy_advertising($::o);
-	    $getFile and return $getFile;
-	    $current_medium = 'unknown'; #- do not know what CD is inserted now.
-	    ejectCdrom($cdrom, $mountpoint);
-	    --$max;
-	}
-    } else {
-	while ($max > 0 && askChangeMedium($current_method, $asked_medium)) {
-	    $current_medium = $asked_medium;
-	    my $getFile = getFile($file); $getFile and return $getFile;
-	    $current_medium = 'unknown'; #- do not know what CD image has been copied.
-	    --$max;
-	}
-    }
-
-    #- Do not unselect supplementary CDs.
-    return if $asked_medium =~ /^\d+s$/;
-
-    #- keep in mind the asked medium has been refused on this way.
-    #- this means it is no more selected.
-    $::o->{packages}{mediums}{$asked_medium}{selected} = undef;
-
-    #- on cancel, we can expect the current medium to be undefined too,
-    #- this enables remounting if selecting a package back.
-    $current_medium = 'unknown';
-
-    return;
-}
-sub getFile {
-    my ($f, $o_method, $o_altroot) = @_;
-    my $current_method = ($asked_medium ? $::o->{packages}{mediums}{$asked_medium}{method} : '') || $::o->{method};
-    log::l("getFile $f:$o_method ($asked_medium:$current_method)");
-    my $rel = relGetFile($f);
-    do {
-	if ($f =~ m|^http://|) {
-	    require http;
-	    http::getFile($f);
-	} elsif ($o_method =~ /crypto|update/i) {
-	    require crypto;
-	    crypto::getFile($f);
-	} elsif ($current_method eq "ftp") {
-	    require ftp;
-	    ftp::getFile($rel, @{ $::o->{packages}{mediums}{$asked_medium}{ftp_prefix} || $global_ftp_prefix || [] });
-	} elsif ($current_method eq "http") {
-	    require http;
-	    http::getFile(($ENV{URLPREFIX} || $o_altroot) . "/$rel");
-	} else {
-	    #- try to open the file, but examine if it is present in the repository,
-	    #- this allows handling changing a media when some of the files on the
-	    #- first CD have been copied to other to avoid media change...
-	    my $f2 = "$postinstall_rpms/$f";
-	    $o_altroot ||= '/tmp/image';
-	    $f2 = "$o_altroot/$rel" if $rel !~ m,^/, && (!$postinstall_rpms || !-e $f2);
-	    my $F; open($F, $f2) ? $F : do { $f2 !~ /XXX/ and log::l("Can not open $f2: $!"); undef };
-	}
-    } || errorOpeningFile($f);
-}
-
-sub getLocalFile {
-    my ($file) = @_;
-    my $F;
-    open($F, $file) ? $F : do { log::l("Can not open $file: $!"); undef };
-}
-
-sub getAndSaveFile {
-    my ($file, $local) = @_ == 1 ? ("install/stage2/live$_[0]", $_[0]) : @_;
-    local $/ = \ (16 * 1024);
-    my $f = ref($file) ? $file : getFile($file) or return;
-    open(my $F, ">$local") or log::l("getAndSaveFile(opening $local): $!"), return;
-    local $_;
-    while (<$f>) { syswrite($F, $_) or die("getAndSaveFile($local): $!") }
-    1;
-}
-
-
-#-######################################################################################
-#- Post installation RPMS from cdrom only, functions
-#-######################################################################################
-sub setup_postinstall_rpms($$) {
-    my ($prefix, $packages) = @_;
-
-    $postinstall_rpms and return;
-    $postinstall_rpms = "$prefix/usr/postinstall-rpm";
-
-    require pkgs;
-
-    log::l("postinstall rpms directory set to $postinstall_rpms");
-    clean_postinstall_rpms(); #- make sure in case of previous upgrade problem.
-    mkdir_p($postinstall_rpms);
-
-    my %toCopy;
-    #- compute closure of package that may be copied, use INSTALL category
-    #- in rpmsrate.
-    $packages->{rpmdb} ||= pkgs::rpmDbOpen();
-    foreach (@{$packages->{needToCopy} || []}) {
-	my $p = pkgs::packageByName($packages, $_) or next;
-	pkgs::selectPackage($packages, $p, 0, \%toCopy);
-    }
-    delete $packages->{rpmdb};
-
-    my @toCopy = grep { $_ && !$_->flag_selected } map { $packages->{depslist}[$_] } keys %toCopy;
-
-    #- extract headers of package, this is necessary for getting
-    #- the complete filename of each package.
-    #- copy the package files in the postinstall RPMS directory.
-    #- last arg is default medium '' known as the CD#1.
-    #- cp_af does not handle correctly a missing file.
-    eval { cp_af((grep { -r $_ } map { "/tmp/image/" . relGetFile($_->filename) } @toCopy), $postinstall_rpms) };
-
-    log::l("copying Auto Install Floppy");
-    getAndSaveInstallFloppies($::o, $postinstall_rpms, 'auto_install');
-}
-
-sub clean_postinstall_rpms() {
-    $postinstall_rpms and -d $postinstall_rpms and rm_rf($postinstall_rpms);
-}
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub getNextStep {
-    my ($o) = @_;
-    find { !$o->{steps}{$_}{done} && $o->{steps}{$_}{reachable} } @{$o->{orderedSteps}};
-}
-
-sub dont_run_directly_stage2() {
-    readlink("/usr/bin/runinstall2") eq "runinstall2.sh";
-}
-
-sub spawnShell() {
-    return if $::o->{localInstall} || $::testing || dont_run_directly_stage2();
-
-    if (my $shellpid = fork()) {
-        output('/var/run/drakx_shell.pid', $shellpid);
-        return;
-    }
-
-    $ENV{DISPLAY} ||= ":0"; #- why not :pp
-
-    local *F;
-    sysopen F, "/dev/tty2", 2 or log::l("cannot open /dev/tty2 -- no shell will be provided: $!"), goto cant_spawn;
-
-    open STDIN, "<&F" or goto cant_spawn;
-    open STDOUT, ">&F" or goto cant_spawn;
-    open STDERR, ">&F" or goto cant_spawn;
-    close F;
-
-    print drakx_version(), "\n";
-
-    c::setsid();
-
-    ioctl(STDIN, c::TIOCSCTTY(), 0) or warn "could not set new controlling tty: $!";
-
-    my @args; -e '/etc/bashrc' and @args = qw(--rcfile /etc/bashrc);
-    foreach (qw(/bin/bash /usr/bin/busybox /bin/sh)) {
-        -x $_ or next;
-        my $program_name = /busybox/ ? "/bin/sh" : $_;  #- since perl_checker is too dumb
-        exec { $_ } $program_name, @args or log::l("exec of $_ failed: $!");
-    }
-
-    log::l("cannot open any shell");
-cant_spawn:
-    c::_exit(1);
-}
-
-sub getAvailableSpace {
-    my ($o) = @_;
-
-    #- make sure of this place to be available for installation, this could help a lot.
-    #- currently doing a very small install use 36Mb of postinstall-rpm, but installing
-    #- these packages may eat up to 90Mb (of course not all the server may be installed!).
-    #- 65mb may be a good choice to avoid almost all problem of insuficient space left...
-    my $minAvailableSize = 65 * sqr(1024);
-
-    my $n = !$::testing && getAvailableSpace_mounted($o->{prefix}) || 
-            getAvailableSpace_raw($o->{fstab}) * 512 / 1.07;
-    $n - max(0.1 * $n, $minAvailableSize);
-}
-
-sub getAvailableSpace_mounted {
-    my ($prefix) = @_;
-    my $dir = -d "$prefix/usr" ? "$prefix/usr" : $prefix;
-    my (undef, $free) = MDK::Common::System::df($dir) or return;
-    log::l("getAvailableSpace_mounted $free KB");
-    $free * 1024 || 1;
-}
-sub getAvailableSpace_raw {
-    my ($fstab) = @_;
-
-    do { $_->{mntpoint} eq '/usr' and return $_->{size} } foreach @$fstab;
-    do { $_->{mntpoint} eq '/'    and return $_->{size} } foreach @$fstab;
-
-    if ($::testing) {
-	my $nb = 450;
-	log::l("taking ${nb}MB for testing");
-	return $nb << 11;
-    }
-    die "missing root partition";
-}
-
-sub preConfigureTimezone {
-    my ($o) = @_;
-    require timezone;
-   
-    #- can not be done in install cuz' timeconfig %post creates funny things
-    add2hash($o->{timezone}, timezone::read()) if $o->{isUpgrade};
-
-    $o->{timezone}{timezone} ||= timezone::bestTimezone($o->{locale}{country});
-
-    my $utc = every { !isFat_or_NTFS($_) } @{$o->{fstab}};
-    my $ntp = timezone::ntp_server();
-    add2hash_($o->{timezone}, { UTC => $utc, ntp => $ntp });
-}
-
-sub ask_if_suppl_media {
-    my ($o) = @_;
-    our $suppl_already_asked;
-    my $msg = $suppl_already_asked
-      ? N("Do you have further supplementary media?")
-      : formatAlaTeX(
-#-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-	    N("The following media have been found and will be used during install: %s.
-
-
-Do you have a supplementary installation media to configure?",
-	    join ", ", uniq(sort {
-		    (my $x) = $a =~ /CD(\d+)/;
-		    (my $y) = $b =~ /CD(\d+)/;
-		    $x && $y ? $x <=> $y : $a cmp $b;
-		} map { $_->{descr} } values %{$o->{packages}{mediums}})));
-    $o->ask_from(
-	'', $msg,
-	[ {
-	    val => \my $suppl,
-	    list => [ N_("None"), N_("CD-ROM"), N_("Network (http)"), N_("Network (ftp)") ],
-	    type => 'list',
-	    format => \&translate,
-	} ],
-    );
-    $suppl_already_asked = 1;
-    return $suppl;
-}
-
-#- if the supplementary media is networked, but not the main one, network
-#- support must be installed and network started.
-sub prep_net_suppl_media {
-    return if our $net_suppl_media_configured;
-    $net_suppl_media_configured = 1;
-    my ($o) = @_;
-    #- install basesystem now
-    $::o->do_pkgs->ensure_is_installed('basesystem', undef, 1);
-    #- from install_steps_interactive:
-    local $::expert = $::expert;
-    require network::netconnect;
-    network::netconnect::main($o->{netcnx} ||= {}, $o, $o->{modules_conf}, $o->{netc}, $o->{mouse}, $o->{intf}, 0, 1);
-    require install_interactive;
-    install_interactive::upNetwork($o);
-    sleep(3);
-}
-
-sub remountCD1 {
-    my ($o, $cdrom) = @_;
-    openCdromTray($cdrom);
-    $o->ask_warn('', N("Insert the CD 1 again"));
-    mountCdrom("/tmp/image", $cdrom);
-    log::l($@) if $@;
-    $asked_medium = 1;
-}
-
-sub selectSupplMedia {
-    my ($o, $suppl_method) = @_;
-    #- ask whether there are supplementary media
-    my $prev_asked_medium = $asked_medium;
-    if ($suppl_method && (my $suppl = ask_if_suppl_media($o)) ne 'None') {
-	#- translate to method name
-	$suppl_method = {
-	    'CD-ROM' => 'cdrom',
-	    'Network (http)' => 'http',
-	    'Network (ftp)' => 'ftp',
-	}->{$suppl};
-	#- by convention, the media names for suppl. CDs match /^\d+s$/
-	my $medium_name = $suppl_method eq 'cdrom'
-	    ? (max(map { $_->{medium} =~ /^(\d+)s$/ ? $1 : 0 } values %{$o->{packages}{mediums}}) + 1) . "s"
-	    : int(keys %{$o->{packages}{mediums}}) + 1;
-	#- configure network if needed
-	prep_net_suppl_media($o) if !scalar keys %{$o->{intf}} && $suppl_method !~ /^(?:cdrom|disk)/;
-	local $::isWizard = 0;
-	my $main_method = $o->{method};
-	local $o->{method} = $suppl_method;
-	if ($suppl_method eq 'cdrom') {
-	    (my $cdromdev) = detect_devices::cdroms();
-	    $o->ask_warn('', N("No device found")), return 'error' if !$cdromdev;
-	    $cdrom = $cdromdev->{device};
-	    $cdrom =~ m,^/, or $cdrom = "/dev/$cdrom";
-	    devices::make($cdrom);
-	    ejectCdrom($cdrom);
-	    if ($o->ask_okcancel('', N("Insert the CD"), 1)) {
-		#- mount suppl CD in /mnt/cdrom to avoid umounting /tmp/image
-		mountCdrom("/mnt/cdrom", $cdrom);
-		if ($@) {
-		    log::l($@);
-		    $o->ask_warn('', N("Unable to mount CD-ROM"));
-		    return 'error';
-		}
-		useMedium($medium_name);
-
-		#- probe for an hdlists file and then look for all hdlists listed herein
-		eval {
-		    pkgs::psUsingHdlists($o, $suppl_method, "/mnt/cdrom", $o->{packages}, $medium_name, sub {
-			my ($supplmedium) = @_;
-			$supplmedium->{issuppl} = 1;
-		    });
-		};
-		log::l("psUsingHdlists failed: $@") if $@;
-
-		#- copy latest compssUsers.pl and rpmsrate somewhere locally
-		getAndSaveFile("/mnt/cdrom/media/media_info/compssUsers.pl", "/tmp/compssUsers.pl");
-		getAndSaveFile("/mnt/cdrom/media/media_info/rpmsrate", "/tmp/rpmsrate");
-
-		#- umount supplementary CD. Will re-ask for it later
-		getFile("XXX"); #- close still opened filehandles
-		log::l("Umounting suppl. CD, back to medium 1");
-		eval { fs::umount("/mnt/cdrom") };
-		#- re-mount CD 1 if this was a cdrom install
-		$main_method eq 'cdrom' and remountCD1($o, $cdrom);
-	    } else {
-		$main_method eq 'cdrom' and remountCD1($o, $cdrom);
-		return 'error';
-	    }
-	} else {
-	    my $url;
-	    local $global_ftp_prefix;
-	    if ($suppl_method eq 'ftp') { #- mirrors are ftp only (currently)
-		$url = $o->askSupplMirror(N("URL of the mirror?")) or return 'error';
-		$url =~ m!^ftp://(?:(.*?)(?::(.*?))?\@)?([^/]+)/(.*)!
-		    and $global_ftp_prefix = [ $3, $4, $1, $2 ]; #- for getFile
-	    } else {
-		$url = $o->ask_from_entry('', N("URL of the mirror?")) or return 'error';
-		$url =~ s!/+\z!!;
-	    }
-	    useMedium($medium_name);
-	    require http if $suppl_method eq 'http';
-	    require ftp if $suppl_method eq 'ftp';
-	    #- first, try to find an hdlists file
-	    eval { pkgs::psUsingHdlists($o, $suppl_method, $url, $o->{packages}, $medium_name, \&setup_suppl_medium) };
-	    if ($@) {
-		log::l("psUsingHdlists failed: $@");
-	    } else {
-		#- copy latest compssUsers.pl and rpmsrate somewhere locally
-		if ($suppl_method eq 'ftp') {
-		    getAndSaveFile("media/media_info/compssUsers.pl", "/tmp/compssUsers.pl");
-		    getAndSaveFile("media/media_info/rpmsrate", "/tmp/rpmsrate");
-		} else {
-		    getAndSaveFile("$url/media/media_info/compssUsers.pl", "/tmp/compssUsers.pl");
-		    getAndSaveFile("$url/media/media_info/rpmsrate", "/tmp/rpmsrate");
-		}
-		useMedium($prev_asked_medium); #- back to main medium
-		return $suppl_method;
-	    }
-	    #- then probe for an hdlist.cz
-	    my $f = eval {
-		if ($suppl_method eq 'http') {
-		    http::getFile("$url/media_info/hdlist.cz");
-		} elsif ($suppl_method eq 'ftp') {
-		    getFile("media_info/hdlist.cz");
-		} else { undef }
-	    };
-	    if (!defined $f) {
-		log::l($@) if $@;
-		#- no hdlist found
-		$o->ask_warn('', N("Can't find a package list file on this mirror. Make sure the location is correct."));
-		useMedium($prev_asked_medium);
-		return 'error';
-	    }
-	    my $supplmedium = pkgs::psUsingHdlist(
-		$suppl_method,
-		$o->{packages},
-		"hdlist$medium_name.cz", #- hdlist
-		$medium_name,
-		'', #- rpmsdir
-		"Supplementary media $medium_name", #- description
-		1, # selected
-		$f,
-	    );
-	    close $f;
-	    if ($supplmedium) {
-		log::l("read suppl hdlist (via $suppl_method)");
-		setup_suppl_medium($supplmedium, $url, $suppl_method);
-	    } else {
-		log::l("no suppl hdlist");
-		$suppl_method = 'error';
-	    }
-	}
-    } else {
-	$suppl_method = '';
-    }
-    useMedium($prev_asked_medium); #- back to main medium
-    return $suppl_method;
-}
-
-sub setup_suppl_medium {
-    my ($supplmedium, $url, $suppl_method) = @_;
-    $supplmedium->{prefix} = $url; #- for install_urpmi
-    if ($suppl_method eq 'ftp') {
-	$url =~ m!^ftp://(?:(.*?)(?::(.*?))?\@)?([^/]+)/(.*)!
-	    and $supplmedium->{ftp_prefix} = [ $3, $4, $1, $2 ]; #- for getFile
-    }
-    $supplmedium->{selected} = 1;
-    $supplmedium->{method} = $suppl_method;
-    $supplmedium->{with_hdlist} = 'media_info/hdlist.cz'; #- for install_urpmi
-    $supplmedium->{issuppl} = 1; #- remember it's a suppl medium
-}
-
-sub _media_rank {
-    my ($x) = @_;
-    my ($y, $s) = $x =~ /(\d+)(s?)\)\.cz/;
-    $s and $y += 100;
-    $y;
-}
-
-sub load_rate_files {
-    my ($o) = @_;
-    #- must be done after getProvides
-    #- if there is a supplementary media, the rpmsrate/compssUsers are overridable
-    pkgs::read_rpmsrate(
-	$o->{packages},
-	$o->{rpmsrate_flags_chosen},
-	-e "/tmp/rpmsrate" ? getLocalFile("/tmp/rpmsrate") : getFile("media/media_info/rpmsrate")
-    );
-    ($o->{compssUsers}, $o->{gtk_display_compssUsers}) = pkgs::readCompssUsers(
-	-e '/tmp/compssUsers.pl' ? '/tmp/compssUsers.pl' : 'media/media_info/compssUsers.pl'
-    );
-    defined $o->{compssUsers} or die "Can't read compssUsers.pl file, aborting installation\n";
-}
-
-sub setPackages {
-    my ($o, $rebuild_needed) = @_;
-
-    require pkgs;
-    if (!$o->{packages} || is_empty_array_ref($o->{packages}{depslist})) {
-	($o->{packages}, my $suppl_method, my $copy_rpms_on_disk) = pkgs::psUsingHdlists($o, $o->{method});
-
-	1 while $suppl_method = $o->selectSupplMedia($suppl_method);
-
-	#- open rpm db according to right mode needed.
-	$o->{packages}{rpmdb} ||= pkgs::rpmDbOpen($rebuild_needed);
-
-	#- always try to select basic kernel (else on upgrade, kernel will never be updated provided a kernel is already
-	#- installed and provides what is necessary).
-	pkgs::selectPackage($o->{packages},
-			    pkgs::bestKernelPackage($o->{packages}) || die("missing kernel package"), 1);
-
-	pkgs::selectPackage($o->{packages},
-			    pkgs::packageByName($o->{packages}, 'basesystem') || die("missing basesystem package"), 1);
-
-	my $rpmsrate_flags_was_chosen = $o->{rpmsrate_flags_chosen};
-
-	put_in_hash($o->{rpmsrate_flags_chosen} ||= {}, rpmsrate_always_flags($o)); #- must be done before pkgs::read_rpmsrate()
-	load_rate_files($o);
-
-	copy_rpms_on_disk($o) if $copy_rpms_on_disk;
-
-	set_rpmsrate_default_category_flags($o, $rpmsrate_flags_was_chosen);
-
-	push @{$o->{default_packages}}, default_packages($o);
-	select_default_packages($o);
-    } else {
-	#- this has to be done to make sure necessary files for urpmi are
-	#- present.
-	pkgs::psUpdateHdlistsDeps($o->{packages});
-
-	#- open rpm db (always without rebuilding db, it should be false at this point).
-	$o->{packages}{rpmdb} ||= pkgs::rpmDbOpen();
-    }
-}
-
-sub count_files {
-    my ($dir) = @_;
-    -d $dir or return 0;
-    opendir my $dh, $dir or return 0;
-    my @list = grep { !/^\.\.?$/ } readdir $dh;
-    closedir $dh;
-    my $c = 0;
-    foreach my $n (@list) {
-	my $p = "$dir/$n";
-	if (-d $p) { $c += count_files($p) } else { ++$c }
-    }
-    $c;
-}
-
-sub cp_with_progress {
-    my $wait_message = shift;
-    my $current = shift;
-    my $total = shift;
-    my $dest = pop @_;
-    @_ or return;
-    @_ == 1 || -d $dest or die "cp: copying multiple files, but last argument ($dest) is not a directory\n";
-
-    foreach my $src (@_) {
-	my $dest = $dest;
-	-d $dest and $dest .= '/' . basename($src);
-
-	unlink $dest;
-
-	if (-l $src) {
-	    unless (symlink(readlink($src) || die("readlink failed: $!"), $dest)) {
-		warn "symlink: can't create symlink $dest: $!\n";
-	    }
-	} elsif (-d $src) {
-	    -d $dest or mkdir $dest, (stat($src))[2] or die "mkdir: can't create directory $dest: $!\n";
-	    cp_with_progress($wait_message, $current, $total, glob_($src), $dest);
-	} else {
-	    open(my $F, $src) or die "can't open $src for reading: $!\n";
-	    open(my $G, ">", $dest) or die "can't cp to file $dest: $!\n";
-	    local $/ = \4096;
-	    local $_; while (<$F>) { print $G $_ }
-	    chmod((stat($src))[2], $dest);
-	    $wait_message->('', ++$current, $total);
-	}
-    }
-    1;
-}
-
-sub copy_rpms_on_disk {
-    my ($o) = @_;
-    mkdir "$o->{prefix}/$_", 0755 foreach qw(var var/ftp var/ftp/pub var/ftp/pub/Mandrivalinux var/ftp/pub/Mandrivalinux/media);
-    local *changeMedium = sub {
-	my ($method, $medium) = @_;
-	my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	if (method_allows_medium_change($method)) {
-	    my $r;
-	    if ($method =~ /-iso$/) {
-		$r = install_any::changeIso($name);
-	    } else {
-		cat_("/proc/mounts") =~ m,(/dev/\S+)\s+(/mnt/cdrom|/tmp/image),
-		    and ($cdrom, my $mountpoint) = ($1, $2);
-		ejectCdrom($cdrom, $mountpoint);
-		$r = $o->ask_okcancel('', N("Change your Cd-Rom!
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.", $name), 1);
-	    }
-	    return $r;
-	} else {
-	    return 1;
-	}
-    };
-    foreach my $k (pkgs::allMediums($o->{packages})) {
-	my $m = $o->{packages}{mediums}{$k};
-	#- don't copy rpms of supplementary media
-	next if $m->{issuppl};#- && $m->{medium} !~ /^\d+s$/; XXX handle suppl CDs
-	my ($wait_w, $wait_message) = fs::format::wait_message($o); #- nb, this is only called when interactive
-	$wait_message->(N("Copying in progress") . "\n($m->{descr})"); #- XXX to be translated
-	if ($k != $current_medium) {
-	    my $cd_k = getCDNumber($m->{descr});
-	    my $cd_cur = getCDNumber($o->{packages}{mediums}{$current_medium}{descr});
-	    $cd_k ne $cd_cur and do {
-		askChangeMedium($o->{method}, $k)
-		    or next;
-		mountCdrom("/tmp/image", $cdrom) if $o->{method} eq 'cdrom';
-	    } while !-d "/tmp/image/$m->{rpmsdir}";
-	    $current_medium = $k;
-	}
-	log::l("copying /tmp/image/$m->{rpmsdir} to $o->{prefix}/var/ftp/pub/Mandrivalinux/media");
-	my $total = count_files("/tmp/image/$m->{rpmsdir}");
-	log::l("($total files)");
-	eval {
-	    cp_with_progress($wait_message, 0, $total, "/tmp/image/$m->{rpmsdir}", "$o->{prefix}/var/ftp/pub/Mandrivalinux/media");
-	};
-	log::l($@) if $@;
-	$m->{prefix} = "$o->{prefix}/var/ftp/pub/Mandrivalinux";
-	$m->{method} = 'disk';
-	$m->{with_hdlist} = 'media_info/hdlist.cz'; #- for install_urpmi
-	undef $wait_w;
-    }
-    ejectCdrom() if $o->{method} eq "cdrom";
-    #- now the install will continue as 'disk'
-    $o->{method} = 'disk';
-    #- shoud be enough to fool errorOpeningFile
-    $current_medium = 1;
-    our $copied_rpms_on_disk = 1;
-}
-
-sub set_rpmsrate_default_category_flags {
-    my ($o, $rpmsrate_flags_was_chosen) = @_;
-
-    #- if no cleaning needed, populate by default, clean is used for second or more call to this function.
-    if ($::auto_install && ($o->{rpmsrate_flags_chosen} || {})->{CAT_ALL}) {
-	$o->{rpmsrate_flags_chosen}{"CAT_$_"} = 1 foreach map { @{$_->{flags}} } @{$o->{compssUsers}};
-    }
-    if (!$rpmsrate_flags_was_chosen && !$o->{isUpgrade}) {
-	#- use default selection seen in compssUsers directly.
-	$_->{selected} = $_->{default_selected} foreach @{$o->{compssUsers}};
-	set_rpmsrate_category_flags($o, $o->{compssUsers});
-    }
-}
-
-sub set_rpmsrate_category_flags {
-    my ($o, $compssUsers) = @_;
-
-    $o->{rpmsrate_flags_chosen}{$_} = 0 foreach grep { /^CAT_/ } keys %{$o->{rpmsrate_flags_chosen}};
-    $o->{rpmsrate_flags_chosen}{"CAT_$_"} = 1 foreach map { @{$_->{flags}} } grep { $_->{selected} } @$compssUsers;
-    $o->{rpmsrate_flags_chosen}{CAT_SYSTEM} = 1;
-}
-
-
-sub rpmsrate_always_flags {
-    my ($o) = @_;
-
-    my $rpmsrate_flags_chosen = {};
-    $rpmsrate_flags_chosen->{uc($_)} = 1 foreach grep { modules::probe_category("multimedia/$_") } modules::sub_categories('multimedia');
-    $rpmsrate_flags_chosen->{uc($_)} = 1 foreach map { $_->{driver} =~ /Flag:(.*)/ } detect_devices::probeall();
-    $rpmsrate_flags_chosen->{DOCS} = !$o->{excludedocs};
-    $rpmsrate_flags_chosen->{UTF8} = $o->{locale}{utf8};
-    $rpmsrate_flags_chosen->{BURNER} = 1 if detect_devices::burners();
-    $rpmsrate_flags_chosen->{DVD} = 1 if detect_devices::dvdroms();
-    $rpmsrate_flags_chosen->{USB} = 1 if $o->{modules_conf}->get_probeall("usb-interface");
-    $rpmsrate_flags_chosen->{PCMCIA} = 1 if detect_devices::hasPCMCIA();
-    $rpmsrate_flags_chosen->{HIGH_SECURITY} = 1 if $o->{security} > 3;
-    $rpmsrate_flags_chosen->{BIGMEM} = 1 if detect_devices::BIGMEM();
-    $rpmsrate_flags_chosen->{SMP} = 1 if detect_devices::hasSMP();
-    $rpmsrate_flags_chosen->{CDCOM} = 1 if any { $_->{descr} =~ /commercial/i } values %{$o->{packages}{mediums}};
-    $rpmsrate_flags_chosen->{TV} = 1 if detect_devices::getTVcards();
-    $rpmsrate_flags_chosen->{'3D'} = 1 if 
-      detect_devices::matching_desc__regexp('Matrox.* G[245][05]0') ||
-      detect_devices::matching_desc__regexp('Rage X[CL]') ||
-      detect_devices::matching_desc__regexp('3D Rage (?:LT|Pro)') ||
-      detect_devices::matching_desc__regexp('Voodoo [35]') ||
-      detect_devices::matching_desc__regexp('Voodoo Banshee') ||
-      detect_devices::matching_desc__regexp('8281[05].* CGC') ||
-      detect_devices::matching_desc__regexp('Rage 128') ||
-      detect_devices::matching_desc__regexp('Radeon ') || #- all Radeon card are now 3D with 4.3.0
-      detect_devices::matching_desc__regexp('[nN]Vidia.*T[nN]T2') || #- TNT2 cards
-      detect_devices::matching_desc__regexp('[nN][vV]idia.*NV[56]') ||
-      detect_devices::matching_desc__regexp('[nN][vV]idia.*Vanta') ||
-      detect_devices::matching_desc__regexp('[nN][vV]idia.*[gG]e[fF]orce') || #- GeForce cards
-      detect_devices::matching_desc__regexp('[nN][vV]idia.*NV1[15]') ||
-      detect_devices::matching_desc__regexp('[nN][vV]idia.*Quadro');
-
-    foreach (lang::langsLANGUAGE($o->{locale}{langs})) {
-	$rpmsrate_flags_chosen->{qq(LOCALES"$_")} = 1;
-    }
-    $rpmsrate_flags_chosen->{'CHARSET"' . lang::l2charset($o->{locale}{lang}) . '"'} = 1;
-
-    $rpmsrate_flags_chosen;
-}
-
-sub default_packages {
-    my ($o) = @_;
-    my @l;
-
-    push @l, "brltty" if cat_("/proc/cmdline") =~ /brltty=/;
-    push @l, "nfs-utils-clients" if $o->{method} eq "nfs";
-    push @l, "numlock" if $o->{miscellaneous}{numlock};
-    push @l, "mdadm" if !is_empty_array_ref($o->{all_hds}{raids});
-    push @l, "lvm2" if !is_empty_array_ref($o->{all_hds}{lvms});
-    push @l, "alsa", "alsa-utils" if any { $o->{modules_conf}->get_alias("sound-slot-$_") =~ /^snd-/ } 0 .. 4;
-    push @l, map { if_($_->{driver} =~ /^Pkg:(.*)/, $1) } detect_devices::probeall();
-
-    my $dmi_BIOS = detect_devices::dmidecode_category('BIOS');
-    my $dmi_Base_Board = detect_devices::dmidecode_category('Base Board');
-    if ($dmi_BIOS->{Vendor} eq 'COMPAL' && $dmi_BIOS->{Characteristics} =~ /Function key-initiated network boot is supported/
-          || $dmi_Base_Board->{Manufacturer} =~ /^ACER/ && $dmi_Base_Board->{'Product Name'} =~ /TravelMate 610/) {
-        modules::append_to_modules_loaded_at_startup_for_all_kernels('acerhk');
-    }
-
-    push @l, "grub" if isLoopback(fs::get::root($o->{fstab}));
-    push @l, uniq(grep { $_ } map { fs::format::package_needed_for_partition_type($_) } @{$o->{fstab}});
-
-    my @locale_pkgs = map { pkgs::packagesProviding($o->{packages}, 'locales-' . $_) } lang::langsLANGUAGE($o->{locale}{langs});
-    unshift @l, uniq(map { $_->name } @locale_pkgs);
-
-    @l;
-}
-
-sub select_default_packages {
-    my ($o) = @_;
-    pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || next) foreach @{$o->{default_packages}};
-}
-
-sub unselectMostPackages {
-    my ($o) = @_;
-    pkgs::unselectAllPackages($o->{packages});
-    select_default_packages($o);
-}
-
-sub warnAboutNaughtyServers {
-    my ($o) = @_;
-    my @naughtyServers = pkgs::naughtyServers($o->{packages}) or return 1;
-    my $r = $o->ask_from_list_('', 
-formatAlaTeX(
-             #-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-             N("You have selected the following server(s): %s
-
-
-These servers are activated by default. They do not have any known security
-issues, but some new ones could be found. In that case, you must make sure
-to upgrade as soon as possible.
-
-
-Do you really want to install these servers?
-", join(", ", @naughtyServers))), [ N_("Yes"), N_("No") ], 'Yes') or return;
-    if ($r ne 'Yes') {
-	log::l("unselecting naughty servers");
-	pkgs::unselectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_)) foreach @naughtyServers;
-    }
-    1;
-}
-
-sub warnAboutRemovedPackages {
-    my ($o, $packages) = @_;
-    my @removedPackages = keys %{$packages->{state}{ask_remove} || {}} or return;
-    if (!$o->ask_yesorno('', 
-formatAlaTeX(
-             #-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-             N("The following packages will be removed to allow upgrading your system: %s
-
-
-Do you really want to remove these packages?
-", join(", ", @removedPackages))), 1)) {
-	$packages->{state}{ask_remove} = {};
-    }
-}
-
-sub addToBeDone(&$) {
-    my ($f, $step) = @_;
-
-    return &$f() if $::o->{steps}{$step}{done};
-
-    push @{$::o->{steps}{$step}{toBeDone}}, $f;
-}
-
-sub set_authentication {
-    my ($o) = @_;
-
-    my $when_network_is_up = sub {
-	my ($f) = @_;
-	#- defer running xxx - no network yet
-	addToBeDone {
-	    require install_steps;
-	    install_steps::upNetwork($o, 'pppAvoided');
-	    $f->();
-	} 'configureNetwork';
-    };
-    require authentication;
-    authentication::set($o, $o->{netc}, $o->{authentication} ||= {}, $when_network_is_up);
-}
-
-sub killCardServices() {
-    my $pid = chomp_(cat_("/tmp/cardmgr.pid"));
-    $pid and kill(15, $pid); #- send SIGTERM
-}
-
-sub unlockCdrom() {
-    my $cdrom = cat_("/proc/mounts") =~ m!(/dev/\S+)\s+(?:/mnt/cdrom|/tmp/image)! && $1 or return;
-    eval { ioctl(detect_devices::tryOpen($cdrom), c::CDROM_LOCKDOOR(), 0) };
-    $@ and log::l("unlock cdrom ($cdrom) failed: $@");
-}
-
-sub openCdromTray {
-    my ($cdrom) = @_;
-    eval { ioctl(detect_devices::tryOpen($cdrom), c::CDROMEJECT(), 1) };
-    $@ and log::l("ejection failed: $@");
-}
-
-sub ejectCdrom {
-    my ($o_cdrom, $o_mountpoint) = @_;
-    getFile("XXX"); #- close still opened filehandle
-    my $cdrom;
-    my $mounts = cat_("/proc/mounts");
-    if ($o_mountpoint) {
-	$cdrom = $o_cdrom || $mounts =~ m!(/dev/\S+)\s+(/mnt/cdrom|/tmp/image)! && $1;
-    } else {
-	my $mntpt;
-	if ($o_cdrom) {
-	    $cdrom = $mounts =~ m!((?:/dev/)?$o_cdrom)\s+(/mnt/cdrom|/tmp/image)! && $1;
-	    $mntpt = $2;
-	} else {
-	    $cdrom = $mounts =~ m!(/dev/\S+)\s+(/mnt/cdrom|/tmp/image)! && $1;
-	    $mntpt = $2;
-	}
-	$o_mountpoint ||= $cdrom ? $mntpt || '/tmp/image' : '';
-    }
-    $cdrom ||= $o_cdrom;
-
-    #- umount BEFORE opening the cdrom device otherwise the umount will
-    #- D state if the cdrom is already removed
-    $o_mountpoint and eval { fs::umount($o_mountpoint) };
-    $@ and warnAboutFilesStillOpen();
-    return if is_xbox();
-    openCdromTray($cdrom);
-}
-
-sub warnAboutFilesStillOpen() {
-    log::l("files still open: ", readlink($_)) foreach map { glob_("$_/fd/*") } glob_("/proc/*");
-}
-
-sub install_urpmi {
-    my ($method, $packages, $mediums) = @_;
-
-    my $hdInstallPath = any::hdInstallPath();
-
-    #- rare case where urpmi cannot be installed (no hd install path).
-    our $copied_rpms_on_disk;
-    $method eq 'disk' && !$hdInstallPath && !$copied_rpms_on_disk and return;
-
-    log::l("install_urpmi $method");
-    #- clean to avoid opening twice the rpm db.
-    delete $packages->{rpmdb};
-
-    #- import pubkey in rpmdb.
-    my $db = pkgs::rpmDbOpenForInstall();
-    $packages->parse_pubkeys(db => $db);
-    foreach my $medium (values %$mediums) {
-	$packages->import_needed_pubkeys($medium->{pubkey}, db => $db, callback => sub {
-					     my (undef, undef, $_k, $id, $imported) = @_;
-					     if ($id) {
-						 log::l(($imported ? "imported" : "found") . " key=$id for medium $medium->{descr}");
-						 $medium->{key_ids}{$id} = undef;
-					     }
-					 });
-    }
-
-    my @cfg;
-    foreach (sort { $a->{medium} <=> $b->{medium} } values %$mediums) {
-	my $name = $_->{fakemedium};
-	if ($_->{ignored} || $_->{selected}) {
-	    my $curmethod = $_->{method} || $::o->{method};
-	    my $dir = (($copied_rpms_on_disk ? "/var/ftp/pub/Mandrivalinux" : '')
-		|| $_->{prefix} || ${{ nfs => "file://mnt/nfs", 
-					   disk => "file:/" . $hdInstallPath,
-					   ftp => $ENV{URLPREFIX},
-					   http => $ENV{URLPREFIX},
-					   cdrom => "removable://mnt/cdrom" }}{$curmethod} ||
-		       #- for live_update or live_install script.
-		       readlink("/tmp/image/media") =~ m,^(/.*)/media/*$, && "removable:/$1") . "/$_->{rpmsdir}";
-	    #- use list file only if visible password or macro.
-	    my $need_list = $dir =~ m,^(?:[^:]*://[^/:\@]*:[^/:\@]+\@|.*%{),; #- }
-
-            my $removable_device;
-
-            if ($curmethod eq 'disk-iso') {
-                my $p = find { $_->{real_mntpoint} eq '/tmp/hdimage' } @{$::o->{fstab}} or
-                  log::l("unable to find ISO image mountpoint, not adding urpmi media"), next;
-                my $iso_info = find_ISO_image_labelled($_->{descr}) or
-                  log::l("unable to find ISO image labelled $name, not adding urpmi media"), next;
-                my ($iso_path) = $iso_info->{file} =~ m,^/tmp/hdimage/+(.*), or
-                  log::l("unable to find ISO image file name ($iso_info->{file}), not adding urpmi media"), next;
-                my $dest = "/mnt/inst_iso";
-                $dir = "removable:/$dest/$_->{rpmsdir}";
-                -d "$::prefix$dest" or mkdir_p("$::prefix$dest");
-                #- FIXME: don't use /mnt/hd but really try to find the mount point
-                $removable_device = ($p->{mntpoint} || "/mnt/hd") . "/$iso_path";
-            } elsif ($curmethod eq 'cdrom') {
-                $removable_device = '/dev/cdrom';
-		my $p; $p = fs::get::mntpoint2part("/tmp/image", $::o->{fstab})
-		    and $removable_device = $p->{device};
-		$_->{static} = 1;
-            }
-
-	    #- build a list file if needed.
-	    if ($need_list) {
-		my $mask = umask 077;
-		open(my $LIST, ">$::prefix/var/lib/urpmi/list.$name") or log::l("failed to write list.$name");
-		umask $mask;
-
-		#- build list file using internal data, synthesis file should exist.
-		if ($_->{end} > $_->{start}) {
-		    #- WARNING this method of build only works because synthesis (or hdlist)
-		    #-         has been read.
-		    foreach (@{$packages->{depslist}}[$_->{start} .. $_->{end}]) {
-			my $arch = $_->arch;
-			my $ldir = $dir;
-			$ldir =~ s|/([^/]*)%{ARCH}|/./$1$arch|; $ldir =~ s|%{ARCH}|$arch|g;
-			print $LIST "$ldir/" . $_->filename . "\n";
-		    }
-		} else {
-		    #- need to use another method here to build list file.
-		    open(my $F, "parsehdlist '$::prefix/var/lib/urpmi/hdlist.$name.cz' |");
-		    local $_; 
-		    while (<$F>) {
-                        my ($arch) = /\.([^\.]+)\.rpm$/;
-			my $ldir = $dir;
-			$ldir =~ s|/([^/]*)%{ARCH}|/./$1$arch|; $ldir =~ s|%{ARCH}|$arch|g;
-			print $LIST "$ldir/$_";
-		    }
-		    close $F;
-		}
-		close $LIST;
-	    }
-
-	    #- build a names file
-	    if (open my $F, ">", "$::prefix/var/lib/urpmi/names.$name") {
-		if (defined $_->{start} && defined $_->{end}) {
-		    foreach ($_->{start} .. $_->{end}) {
-			print $F $packages->{depslist}[$_]->name . "\n";
-		    }
-		}
-		close $F;
-	    }
-
-	    #- build synthesis file if there are still not existing (ie not copied from mirror).
-	    if (-s "$::prefix/var/lib/urpmi/synthesis.hdlist.$name.cz" <= 32) {
-		unlink "$::prefix/var/lib/urpmi/synthesis.hdlist.$name.cz";
-		run_program::rooted($::prefix, "parsehdlist", ">", "/var/lib/urpmi/synthesis.hdlist.$name",
-				    "--synthesis", "/var/lib/urpmi/hdlist.$name.cz");
-		run_program::rooted($::prefix, "gzip", "-S", ".cz", "/var/lib/urpmi/synthesis.hdlist.$name");
-	    }
-
-	    my ($qname, $qdir) = ($name, $dir);
-	    $qname =~ s/(\s)/\\$1/g; $qdir =~ s/(\s)/\\$1/g;
-
-	    #- compute correctly reference to media/media_info
-	    my $with;
-	    if ($_->{update}) {
-		$with = "media_info/hdlist.cz";
-	    } elsif ($_->{with_hdlist}) {
-		$with = $_->{with_hdlist};
-	    } else {
-		$with = $_->{rpmsdir};
-		$with =~ s|/[^/]*%{ARCH}.*||;
-		$with =~ s|/+|/|g; $with =~ s|/$||; $with =~ s|[^/]||g; $with =~ s!/!../!g;
-		$with .= "../media/media_info/$_->{hdlist}";
-	    }
-
-	    #- output new urpmi.cfg format here.
-	    push @cfg, "$qname " . ($need_list ? "" : $qdir) . " {
-  hdlist: hdlist.$name.cz
-  with_hdlist: $with" . ($need_list ? "
-  list: list.$name" : "") . (keys(%{$_->{key_ids}}) ? "
-  key-ids: " . join(',', keys(%{$_->{key_ids}})) : "") . (defined $removable_device && "
-  removable: $removable_device") . ($_->{update} ? "
-  update" : "") . ($_->{static} ? "
-  static" : "") . "
-}
-
-";
-	} else {
-	    #- remove not selected media by removing hdlist and synthesis files copied.
-	    log::l("removing media $name");
-	    unlink "$::prefix/var/lib/urpmi/hdlist.$name.cz";
-	    unlink "$::prefix/var/lib/urpmi/synthesis.hdlist.$name.cz";
-	}
-    }
-    #- touch a MD5SUM file and write config file
-    eval { output("$::prefix/var/lib/urpmi/MD5SUM", '') };
-    eval { output "$::prefix/etc/urpmi/urpmi.cfg", @cfg };
-}
-
-
-#-###############################################################################
-#- kde stuff
-#-###############################################################################
-sub kderc_largedisplay {
-    my ($prefix) = @_;
-
-    update_gnomekderc($_, 'KDE', 
-		     Contrast => 7,
-		     kfmIconStyle => "Large",
-		     kpanelIconStyle => "Normal", #- to change to Large when icons looks better
-		     KDEIconStyle => "Large") foreach list_skels($prefix, '.kderc');
-
-    substInFile {
-	s/^(GridWidth)=85/$1=100/;
-	s/^(GridHeight)=70/$1=75/;
-    } $_ foreach list_skels($prefix, '.kde/share/config/kfmrc');
-}
-
-sub kdemove_desktop_file {
-    my ($prefix) = @_;
-    my @toMove = qw(doc.kdelnk news.kdelnk updates.kdelnk home.kdelnk printer.kdelnk floppy.kdelnk cdrom.kdelnk FLOPPY.kdelnk CDROM.kdelnk);
-
-    #- remove any existing save in Trash of each user and
-    #- move appropriate file there after an upgrade.
-    foreach my $dir (grep { -d $_ } list_skels($prefix, 'Desktop')) {
-	renamef("$dir/$_", "$dir/Trash/$_") 
-	  foreach grep { -e "$dir/$_" } @toMove, grep { /\.rpmorig$/ } all($dir);
-    }
-}
-
-
-#-###############################################################################
-#- auto_install stuff
-#-###############################################################################
-sub auto_inst_file() { "$::prefix/root/drakx/auto_inst.cfg.pl" }
-
-sub report_bug() {
-    any::report_bug('auto_inst' => g_auto_install('', 1));
-}
-
-sub g_auto_install {
-    my ($b_replay, $b_respect_privacy) = @_;
-    my $o = {};
-
-    require pkgs;
-    $o->{default_packages} = pkgs::selected_leaves($::o->{packages});
-
-    my @fields = qw(mntpoint fs_type size);
-    $o->{partitions} = [ map { 
-	my %l; @l{@fields} = @$_{@fields}; \%l;
-    } grep { 
-	$_->{mntpoint} && fs::format::known_type($_);
-    } @{$::o->{fstab}} ];
-    
-    exists $::o->{$_} and $o->{$_} = $::o->{$_} foreach qw(locale authentication mouse netc timezone superuser intf keyboard users partitioning isUpgrade manualFstab nomouseprobe crypto security security_user libsafe netcnx useSupermount autoExitInstall X services postInstall postInstallNonRooted); #- TODO modules bootloader 
-
-    $o->{printer} = $::o->{printer} if $::o->{printer};
-
-    local $o->{partitioning}{auto_allocate} = !$b_replay;
-    $o->{autoExitInstall} = !$b_replay;
-    $o->{interactiveSteps} = [ 'doPartitionDisks', 'formatPartitions' ] if $b_replay;
-
-    #- deep copy because we're modifying it below
-    $o->{users} = $b_respect_privacy ? [] : [ @{$o->{users} || []} ];
-
-    my @user_info_to_remove = (
-	if_($b_respect_privacy, qw(realname pw)), 
-	qw(oldu oldg password password2),
-    );
-    $_ = { %{$_ || {}} }, delete @$_{@user_info_to_remove} foreach $o->{superuser}, @{$o->{users} || []};
-
-    if ($b_respect_privacy && $o->{netcnx}) {
-	if (my $type = $o->{netcnx}{type}) {
-	    my @netcnx_type_to_remove = qw(passwd passwd2 login phone_in phone_out);
-	    $_ = { %{$_ || {}} }, delete @$_{@netcnx_type_to_remove} foreach $o->{netcnx}{$type};
-	}
-    }
-    my $warn_privacy = $b_respect_privacy ? "!! This file has been simplified to respect privacy when reporting problems.
-# You should use /root/drakx/auto_inst.cfg.pl instead !!\n#" : '';
-    
-    require Data::Dumper;
-    my $str = join('', 
-"#!/usr/bin/perl -cw
-# $warn_privacy
-# You should check the syntax of this file before using it in an auto-install.
-# You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file
-# (note the '#!/usr/bin/perl -cw' on the first line).
-", Data::Dumper->Dump([$o], ['$o']), "\0");
-    $str =~ s/ {8}/\t/g; #- replace all 8 space char by only one tabulation, this reduces file size so much :-)
-    $str;
-}
-
-sub getAndSaveInstallFloppies {
-    my ($o, $dest_dir, $name) = @_;    
-
-    if ($postinstall_rpms && -d $postinstall_rpms && -r "$postinstall_rpms/auto_install.img") {
-	log::l("getAndSaveInstallFloppies: using file saved as $postinstall_rpms/auto_install.img");
-	cp_af("$postinstall_rpms/auto_install.img", "$dest_dir/$name.img");
-	"$dest_dir/$name.img";
-    } else {
-	my $image = cat_("/proc/cmdline") =~ /pcmcia/ ? "pcmcia" :
-	  arch() =~ /ia64|ppc/ ? "all"  : #- we only use all.img there
-	  ${{ disk => 'hd_grub', 'disk-iso' => 'hd_grub', cdrom => 'cdrom', ftp => 'network', nfs => 'network', http => 'network' }}{$o->{method}};
-	my $have_drivers = $image eq 'network';
-	$image .= arch() =~ /sparc64/ && "64"; #- for sparc64 there are a specific set of image.
-
-	if ($have_drivers) {
-	    getAndSaveFile("install/images/${image}_drivers.img", "$dest_dir/${name}_drivers.img") or log::l("failed to write Install Floppy (${image}_drivers.img) to $dest_dir/${name}_drivers.img"), return;
-	}
-	getAndSaveFile("install/images/$image.img", "$dest_dir/$name.img") or log::l("failed to write Install Floppy ($image.img) to $dest_dir/$name.img"), return;
-
-	"$dest_dir/$name.img", if_($have_drivers, "$dest_dir/${name}_drivers.img");
-    }
-}
-
-sub getAndSaveAutoInstallFloppies {
-    my ($o, $replay) = @_;
-    my $name = ($replay ? 'replay' : 'auto') . '_install';
-    my $dest_dir = "$o->{prefix}/root/drakx";
-
-    eval { modules::load('loop') };
-
-    if (arch() =~ /ia64/) {
-	#- nothing yet
-    } else {
-	my $mountdir = "$o->{prefix}/root/aif-mount"; -d $mountdir or mkdir $mountdir, 0755;
-	my $param = 'kickstart=floppy ' . generate_automatic_stage1_params($o);
-
-	my @imgs = getAndSaveInstallFloppies($o, $dest_dir, $name) or return;
-
-	foreach my $img (@imgs) {
-	    my $dev = devices::set_loop($img) or log::l("couldn't set loopback device"), return;
-	    find { eval { fs::mount($dev, $mountdir, $_, 0); 1 } } qw(ext2 vfat) or return;
-
-	    if (-e "$mountdir/menu.lst") {
-		# hd_grub boot disk is different than others
-		substInFile {
-		    s/^(\s*timeout.*)/timeout 1/;
-		    s/\bautomatic=method:disk/$param/;
-		} "$mountdir/menu.lst";
-	    } elsif (-e "$mountdir/syslinux.cfg") {
-		#- make room first
-		unlink "$mountdir/help.msg", "$mountdir/boot.msg";
-
-		substInFile { 
-		    s/timeout.*/$replay ? 'timeout 1' : ''/e;
-		    s/^(\s*append)/$1 $param/; 
-		} "$mountdir/syslinux.cfg";
-
-		output "$mountdir/boot.msg", $replay ? '' : "\n0c" .
-"!! If you press enter, an auto-install is going to start.
-   All data on this computer is going to be lost,
-   including any Windows partitions !!
-" . "07\n";
-	    }
-
-	    if (@imgs == 1 || $img =~ /drivers/) {
-		local $o->{partitioning}{clearall} = !$replay;
-		eval { output("$mountdir/auto_inst.cfg", g_auto_install($replay)) };
-		$@ and log::l("Warning: <", formatError($@), ">");
-	    }
-	
-	    fs::umount($mountdir);
-	    devices::del_loop($dev);
-	}
-	rmdir $mountdir;
-	@imgs;
-    }
-}
-
-
-sub g_default_packages {
-    my ($o) = @_;
-
-    my ($_h, $file) = media_browser($o, 'save', 'package_list.pl') or return;
-
-    require Data::Dumper;
-    my $str = Data::Dumper->Dump([ { default_packages => pkgs::selected_leaves($o->{packages}) } ], ['$o']);
-    $str =~ s/ {8}/\t/g;
-    output($file,
-	   "# You should always check the syntax with 'perl -cw auto_inst.cfg.pl'\n" .
-	   "# before testing.  To use it, boot with ``linux defcfg=floppy''\n" .
-	   $str . "\0");
-}
-
-sub loadO {
-    my ($O, $f) = @_; $f ||= auto_inst_file();
-    my $o;
-    if ($f =~ /^(floppy|patch)$/) {
-	my $f = $f eq "floppy" ? 'auto_inst.cfg' : "patch";
-	unless ($::testing) {
-            my $dev = devices::make(detect_devices::floppy());
-            foreach my $fs (arch() =~ /sparc/ ? 'romfs' : ('ext2', 'vfat')) {
-                eval { fs::mount($dev, '/mnt', $fs, 'readonly'); 1 } and goto mount_ok;
-            }
-            die "Could not mount floppy [$dev]";
-          mount_ok:
-	    $f = "/mnt/$f";
-	}
-	-e $f or $f .= '.pl';
-
-	my $_b = before_leaving {
-	    fs::umount("/mnt") unless $::testing;
-	    modules::unload(qw(vfat fat));
-	};
-	$o = loadO($O, $f);
-    } else {
-	my $fh;
-	if (ref $f) {
-	    $fh = $f;
-	} else {
-	    -e "$f.pl" and $f .= ".pl" unless -e $f;
-
-	    if (-e $f) { open $fh, $f } else { $fh = getFile($f) or die N("Error reading file %s", $f) }
-	}
-	{
-	    local $/ = "\0";
-	    no strict;
-	    eval <$fh>;
-	    close $fh;
-	    $@ and die;
-	}
-	$O and add2hash_($o ||= {}, $O);
-    }
-    $O and bless $o, ref $O;
-
-    #- handle backward compatibility for things that changed
-    foreach (@{$o->{partitions} || []}, @{$o->{manualFstab} || []}) {
-	if (my $type = delete $_->{type}) {
-	    if ($type =~ /^(0x)?(\d*)$/) {
-		fs::type::set_pt_type($_, $type);
-	    } else {
-		fs::type::set_fs_type($_, $type);
-	    }
-	}
-    }
-    #- {rpmsrate_flags_chosen} was called {compssUsersChoice}
-    if (my $rpmsrate_flags_chosen = delete $o->{compssUsersChoice}) {
-	$o->{rpmsrate_flags_chosen} = $rpmsrate_flags_chosen;
-    }
-    #- compssUsers flags are now named CAT_XXX
-    if ($o->{rpmsrate_flags_chosen} &&
-	! any { /^CAT_/ } keys %{$o->{rpmsrate_flags_chosen}}) {
-	#- we don't really know if this is needed for compatibility, but it won't hurt :)
-	foreach (keys %{$o->{rpmsrate_flags_chosen}}) {
-	    $o->{rpmsrate_flags_chosen}{"CAT_$_"} = $o->{rpmsrate_flags_chosen}{$_};
-	}
-	#- it used to be always selected
-	$o->{rpmsrate_flags_chosen}{CAT_SYSTEM} = 1;
-    }
-
-    $o;
-}
-
-sub generate_automatic_stage1_params {
-    my ($o) = @_;
-
-    my $method = $o->{method};
-    my @ks;
-
-    if ($o->{method} eq 'http') {
-	$ENV{URLPREFIX} =~ m!(http|ftp)://([^/:]+)(.*)! or die;
-	$method = $1; #- in stage1, FTP via HTTP proxy is available through FTP config, not HTTP
-	@ks = (server => $2, directory => $3);
-    } elsif ($o->{method} eq 'ftp') {
-	@ks = (server => $ENV{HOST}, directory => $ENV{PREFIX}, user => $ENV{LOGIN}, pass => $ENV{PASSWORD});
-    } elsif ($o->{method} eq 'nfs') {
-	cat_("/proc/mounts") =~ m|(\S+):(\S+)\s+/tmp/nfsimage| or internal_error("can not find nfsimage");
-	@ks = (server => $1, directory => $2);
-    }
-    @ks = (method => $method, @ks);
-
-    if (member($o->{method}, qw(http ftp nfs))) {
-	if ($ENV{PROXY}) {
-	    push @ks, proxy_host => $ENV{PROXY}, proxy_port => $ENV{PROXYPORT};
-	}
-	my ($intf) = values %{$o->{intf}};
-	push @ks, interface => $intf->{DEVICE};
-	if ($intf->{BOOTPROTO} eq 'dhcp') {
-	    push @ks, network => 'dhcp';
-	} else {
-	    push @ks, network => 'static', ip => $intf->{IPADDR}, netmask => $intf->{NETMASK}, gateway => $o->{netc}{GATEWAY};
-	    require network::network;
-	    if (my @dnss = network::network::dnsServers($o->{netc})) {
-		push @ks, dns => $dnss[0];
-	    }
-	}
-    }
-
-    #- sync it with ../mdk-stage1/automatic.c
-    my %aliases = (method => 'met', network => 'netw', interface => 'int', gateway => 'gat', netmask => 'netm',
-		   adsluser => 'adslu', adslpass => 'adslp', hostname => 'hos', domain => 'dom', server => 'ser',
-		   directory => 'dir', user => 'use', pass => 'pas', disk => 'dis', partition => 'par');
-    
-    'automatic=' . join(',', map { ($aliases{$_->[0]} || $_->[0]) . ':' . $_->[1] } group_by2(@ks));
-}
-
-sub guess_mount_point {
-    my ($part, $prefix, $user) = @_;
-
-    my %l = (
-	     '/'     => 'etc/fstab',
-	     '/boot' => 'vmlinuz',
-	     '/tmp'  => '.X11-unix',
-	     '/usr'  => 'X11R6',
-	     '/var'  => 'catman',
-	    );
-
-    my $handle = any::inspect($part, $prefix) or return;
-    my $d = $handle->{dir};
-    my $mnt = find { -e "$d/$l{$_}" } keys %l;
-    $mnt ||= (stat("$d/.bashrc"))[4] ? '/root' : '/home/user' . ++$$user if -e "$d/.bashrc";
-    $mnt ||= (any { -d $_ && (stat($_))[4] >= 500 && -e "$_/.bashrc" } glob_($d)) ? '/home' : '';
-    ($mnt, $handle);
-}
-
-sub suggest_mount_points {
-    my ($fstab, $prefix, $uniq) = @_;
-
-    my $user;
-    foreach my $part (grep { isTrueFS($_) } @$fstab) {
-	$part->{mntpoint} && !$part->{unsafeMntpoint} and next; #- if already found via an fstab
-
-	my ($mnt, $handle) = guess_mount_point($part, $prefix, \$user) or next;
-
-	next if $uniq && fs::get::mntpoint2part($mnt, $fstab);
-	$part->{mntpoint} = $mnt; delete $part->{unsafeMntpoint};
-
-	#- try to find other mount points via fstab
-	fs::merge_info_from_fstab($fstab, $handle->{dir}, $uniq, 'loose') if $mnt eq '/';
-    }
-    $_->{mntpoint} and log::l("suggest_mount_points: $_->{device} -> $_->{mntpoint}") foreach @$fstab;
-}
-
-sub find_root_parts {
-    my ($fstab, $prefix) = @_;
-    map { 
-	my $handle = any::inspect($_, $prefix);
-	if (my $f = $handle && common::release_file($handle->{dir})) {
-	    my $s = cat_("$handle->{dir}$f");
-	    chomp($s);
-	    $s =~ s/\s+for\s+\S+//;
-	    log::l("find_root_parts found $_->{device}: $s");
-	    { release => $s, part => $_, release_file => $f };
-	} else { () }
-    } @$fstab;
-}
-
-sub migrate_device_names {
-    my ($all_hds, $from_fstab, $new_root, $root_from_fstab, $o_in) = @_;
-
-    log::l("warning: fstab says root partition is $root_from_fstab->{device}, whereas we were reading fstab from $new_root->{device}");
-    my ($old_prefix, $old_part_number) = devices::simple_partition_scan($root_from_fstab);
-    my ($new_prefix, $new_part_number) = devices::simple_partition_scan($new_root);
-
-    if ($old_part_number != $new_part_number) {
-	log::l("argh, $root_from_fstab->{device} and $old_part_number->{device} are not the same partition number");
-	return;
-    }
-
-    log::l("replacing $old_prefix with $new_prefix");
-    
-    my %h;
-    foreach (@$from_fstab) {
-	if ($_->{device} =~ s!^\Q$old_prefix!$new_prefix!) {
-	    #- this is simple to handle, nothing more to do
-	} elsif ($_->{part_number}) {
-	    my $device_prefix = devices::part_prefix($_);
-	    push @{$h{$device_prefix}}, $_;
-	} else {
-	    #- hopefully this does not need anything special
-	}
-    }
-    my @from_fstab_per_hds = values %h or return;
-
-
-    my @current_hds = grep { $new_root->{rootDevice} ne $_->{device} } fs::get::hds($all_hds);
-
-    found_one:
-    @from_fstab_per_hds or return;
-
-    foreach my $from_fstab_per_hd (@from_fstab_per_hds) {
-	my ($matching, $other) = partition { 
-	    my $hd = $_;
-	    every {
-		my $wanted = $_;
-		my $part = find { $_->{part_number} eq $wanted->{part_number} } partition_table::get_normal_parts($hd);
-		$part && $part->{fs_type} && fs::type::can_be_this_fs_type($wanted, $part->{fs_type});
-	    } @$from_fstab_per_hd;
-	} @current_hds;
-	@$matching == 1 or next;
-
-	my ($hd) = @$matching;
-	@current_hds = @$other;
-	@from_fstab_per_hds = grep { $_ != $from_fstab_per_hd } @from_fstab_per_hds;
-
-	log::l("$hd->{device} nicely corresponds to " . join(' ', map { $_->{device} } @$from_fstab_per_hd));
-	foreach (@$from_fstab_per_hd) {
-	    partition_table::compute_device_name($_, $hd);
-	}
-	goto found_one;
-    }
-	
-    #- we can not find one and only one matching hd
-    my @from_fstab_not_handled = map { @$_ } @from_fstab_per_hds;
-    log::l("we still do not know what to do with: " . join(' ', map { $_->{device} } @from_fstab_not_handled));
-
-
-    if (!$o_in) {
-	die 'still have';
-	log::l("well, ignoring them!");
-	return;
-    }
-
-    my $propositions_valid = every {
-	my $wanted = $_;
-	my @parts = grep { $_->{part_number} eq $wanted->{part_number}
-			     && $_->{fs_type} && fs::type::can_be_this_fs_type($wanted, $_->{fs_type}) } fs::get::hds_fstab(@current_hds);
-	$wanted->{propositions} = \@parts;
-	@parts > 0;
-    } @from_fstab_not_handled;
-
-    $o_in->ask_from('', 
-		    N("The following disk(s) were renamed:"),
-		    [ map {
-			{ label => N("%s (previously named as %s)", $_->{mntpoint}, $_->{device}),
-			  val => \$_->{device}, format => sub { $_[0] && $_->{device} },
-			  list => [ '', 
-				    $propositions_valid ? @{$_->{propositions}} : 
-				    fs::get::hds_fstab(@current_hds) ] };
-		    } @from_fstab_not_handled ]);
-}
-
-sub use_root_part {
-    my ($all_hds, $part, $o_in) = @_;
-    my $migrate_device_names;
-    {
-	my $handle = any::inspect($part, $::prefix) or die;
-
-	my @from_fstab = fs::read_fstab($handle->{dir}, '/etc/fstab', 'keep_default');
-
-	my $root_from_fstab = fs::get::root_(\@from_fstab);
-	if (!fsedit::is_same_hd($root_from_fstab, $part)) {
-	    $migrate_device_names = 1;
-	    log::l("from_fstab contained: $_->{device} $_->{mntpoint}") foreach @from_fstab;
-	    migrate_device_names($all_hds, \@from_fstab, $part, $root_from_fstab, $o_in);
-	    log::l("from_fstab now contains: $_->{device} $_->{mntpoint}") foreach @from_fstab;
-	}
-	fs::add2all_hds($all_hds, @from_fstab);
-	log::l("fstab is now: $_->{device} $_->{mntpoint}") foreach fs::get::fstab($all_hds);
-    }
-    isSwap($_) and $_->{mntpoint} = 'swap' foreach fs::get::really_all_fstab($all_hds); #- use all available swap.
-    $migrate_device_names;
-}
-
-sub getHds {
-    my ($o, $o_in) = @_;
-
-  getHds: 
-    my $all_hds = fsedit::get_hds($o->{partitioning}, $o_in);
-    my $hds = $all_hds->{hds};
-
-    if (is_empty_array_ref($hds) && !$::move) { #- no way
-	die N("An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem");
-    }
-
-    #- try to figure out if the same number of hds is available, use them if ok.
-    @{$o->{all_hds}{hds} || []} == @$hds and return 1;
-
-    fs::get_raw_hds('', $all_hds);
-    fs::add2all_hds($all_hds, @{$o->{manualFstab}});
-
-    $o->{all_hds} = $all_hds;
-    $o->{fstab} = [ fs::get::really_all_fstab($all_hds) ];
-    fs::merge_info_from_mtab($o->{fstab});
-
-    my @win = grep { isFat_or_NTFS($_) && maybeFormatted($_) && !$_->{is_removable} } @{$o->{fstab}};
-    log::l("win parts: ", join ",", map { $_->{device} } @win) if @win;
-    if (@win == 1) {
-	#- Suggest /boot/efi on ia64.
-	$win[0]{mntpoint} = arch() =~ /ia64/ ? "/boot/efi" : "/mnt/windows";
-    } else {
-	my %w; foreach (@win) {
-	    my $v = $w{$_->{device_windobe}}++;
-	    $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/win_" . lc($_->{device_windobe}) . ($v ? $v+1 : ''); #- lc cuz of StartOffice(!) cf dadou
-	}
-    }
-
-    my @sunos = grep { $_->{pt_type} == 2 } @{$o->{fstab}}; #- take only into account root partitions.
-    if (@sunos) {
-	my $v = '';
-	map { $_->{mntpoint} = $_->{unsafeMntpoint} = "/mnt/sunos" . ($v && ++$v) } @sunos;
-    }
-    #- a good job is to mount SunOS root partition, and to use mount point described here in /etc/vfstab.
-
-    1;
-}
-
-my %media_browser;
-sub media_browser {
-    my ($in, $save, $o_suggested_name) = @_;
-
-    my %media_type2text = (
-	fd => N("Floppy"),
-	hd => N("Hard Disk"),
-	cdrom => N("CDROM"),
-    );
-    my @network_protocols = (if_(!$save, N_("HTTP")), N_("FTP"), N_("NFS"));
-
-    my $to_text = sub {
-	my ($hd) = @_;
-	($media_type2text{$hd->{media_type}} || $hd->{media_type}) . ': ' . partition_table::description($hd);
-    };
-
-  ask_media:
-    my $all_hds = fsedit::get_hds({}, $in);
-    fs::get_raw_hds('', $all_hds);
-
-    my @raw_hds = grep { !$save || $_->{media_type} ne 'cdrom' } @{$all_hds->{raw_hds}};
-    my @dev_and_text = group_by2(
-	(map { $_ => $to_text->($_) } @raw_hds),
-	(map { 
-	    my $hd = $to_text->($_);
-	    map { $_ => join('\1', $hd, partition_table::description($_)) } grep { isTrueFS($_) || isOtherAvailableFS($_) } fs::get::hds_fstab($_);
-	} fs::get::hds($all_hds)),
-	if_(member($::o->{method}, qw(ftp http nfs)) || install_steps::hasNetwork($::o),
-	    map { $_ => join('\1', N("Network"), translate($_)) } @network_protocols),
-    );
-
-    $in->ask_from_({
-	messages => N("Please choose a media"),
-    }, [ 
-	{ val => \$media_browser{dev}, separator => '\1', list => [ map { $_->[1] } @dev_and_text ] },
-    ]) or return;
-
-    my $dev = (find { $_->[1] eq $media_browser{dev} } @dev_and_text)->[0];
-
-    if (member($dev, @network_protocols)) {
-	install_interactive::upNetwork($::o);
-	if ($dev eq 'HTTP') {
-	    require http;
-	    $media_browser{network} ||= 'http://';
-	} else {
-	    $in->ask_warn('', 'todo');
-	    goto ask_media;
-	}
-	while (1) {
-	    $in->ask_from('', 'URL', [
-		{ val => \$media_browser{network} }
-	    ]) or last;
-		    
-	    if ($dev eq 'HTTP') {
-		my $fh = http::getFile($media_browser{network});
-		$fh and return '', $fh;
-	    }
-	}
-    } else {
-	if (!$dev->{fs_type} || $dev->{fs_type} eq 'auto' || $dev->{fs_type} =~ /:/) {
-	    if (my $p = fs::type::type_subpart_from_magic($dev)) {
-		add2hash($p, $dev);
-		$dev = $p;
-	    } else {
-		$in->ask_warn(N("Error"), N("Bad media %s", partition_table::description($dev)));
-		goto ask_media;
-	    }
-	}
-	my $file;
-	if (my $h = any::inspect($dev, $::prefix, $save)) {
-	    while (1) {
-		$file = $in->ask_filename({ save => $save, 
-					    directory => $h->{dir}, 
-					    if_($o_suggested_name, file => "$h->{dir}/$o_suggested_name"),
-					}) or last;
-		if (-e $file && $save) {
-		    $in->ask_yesorno('', N("File already exists. Overwrite it?")) or next;
-		}
-		if ($save) {
-		    return $h, $file;
-		} else {
-		    my $fh;
-		    open($fh, $file) and return $h, $fh;
-		}
-	    }
-	    undef $h; #- help perl
-	} else {
-	    $in->ask_warn(N("Error"), formatError($@));
-	}
-	goto ask_media;
-    }
-}
-
-sub log_sizes {
-    my ($o) = @_;
-    my @df = MDK::Common::System::df($o->{prefix});
-    log::l(sprintf "Installed: %s(df), %s(rpm)",
-	   formatXiB($df[0] - $df[1], 1024),
-	   formatXiB(sum(run_program::rooted_get_stdout($o->{prefix}, 'rpm', '-qa', '--queryformat', '%{size}\n')))) if -x "$o->{prefix}/bin/rpm";
-}
-
-sub X_options_from_o {
-    my ($o) = @_;
-    { 
-	freedriver => $o->{freedriver},
-	allowFB => $o->{allowFB},
-    };
-}
-
-sub screenshot_dir__and_move() {
-    my ($dir1, $dir2) = ("$::prefix/root", '/tmp');
-    if (-e $dir1) {
-	if (-e "$dir2/DrakX-screenshots") {
-	    cp_af("$dir2/DrakX-screenshots", $dir1);
-	    rm_rf("$dir2/DrakX-screenshots");
-	}
-	$dir1;
-    } else {
-	$dir2;
-    }
-}
-
-sub take_screenshot {
-    my ($in) = @_;
-    my $dir = screenshot_dir__and_move() . '/DrakX-screenshots';
-    my $warn;
-    if (!-e $dir) {
-	mkdir $dir or $in->ask_warn('', N("Can not make screenshots before partitioning")), return;
-	$warn = 1;
-    }
-    my $nb = 1;
-    $nb++ while -e "$dir/$nb.png";
-    system("fb2png /dev/fb0 $dir/$nb.png 0");
-
-    $in->ask_warn('', N("Screenshots will be available after install in %s", "/root/DrakX-screenshots")) if $warn;
-}
-
-sub copy_advertising {
-    my ($o) = @_;
-
-    return if $::rootwidth < 800;
-
-    my $f;
-    my $source_dir = "install/extra/advertising";
-    foreach ("." . $o->{locale}{lang}, "." . substr($o->{locale}{lang},0,2), '') {
-	$f = getFile("$source_dir$_/list") or next;
-	$source_dir = "$source_dir$_";
-    }
-    if (my @files = <$f>) {
-	my $dir = "$o->{prefix}/tmp/drakx-images";
-	mkdir $dir;
-	unlink glob_("$dir/*");
-	foreach (@files) {
-	    chomp;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.png/.pl/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.pl/_icon.png/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/_icon\.png/.png/;
-	}
-	@advertising_images = map { "$dir/$_" } @files;
-    }
-}
-
-sub remove_advertising {
-    my ($o) = @_;
-    eval { rm_rf("$o->{prefix}/tmp/drakx-images") };
-    @advertising_images = ();
-}
-
-sub disable_user_view() {
-    substInFile { s/^UserView=.*/UserView=true/ } "$::prefix/usr/share/config/kdm/kdmrc";
-    substInFile { s/^Browser=.*/Browser=0/ } "$::prefix/etc/X11/gdm/gdm.conf";
-}
-
-sub set_security {
-    my ($o) = @_;
-    {
-	local $ENV{DRAKX_PASSWORD} = $o->{bootloader}{password};
-	local $ENV{DURING_INSTALL} = 1;
-	security::level::set($o->{security});
-    }
-    require security::various;
-    security::various::config_libsafe($::prefix, $o->{libsafe});
-    security::various::config_security_user($::prefix, $o->{security_user});
-}
-
-sub write_fstab {
-    my ($o) = @_;
-    fs::write_fstab($o->{all_hds}, $o->{prefix}) if !$o->{isUpgrade} || $o->{migrate_device_names};
-}
-
-my $clp_name = 'mdkinst.clp';
-sub clp_on_disk() { "$::prefix/tmp/$clp_name" }
-
-sub move_clp_to_disk() {
-    return if -e clp_on_disk();
-
-    my ($loop, $current_clp) = devices::find_clp_loop($clp_name) or return;
-    log::l("move_clp_to_disk: copying $current_clp to ", clp_on_disk());
-    cp_af($current_clp, clp_on_disk());
-    run_program::run('losetup', '-r', $loop, clp_on_disk());
-
-    #- in $current_clp eq "/tmp/$clp_name"
-    unlink "/tmp/$clp_name";
-}
-
-#-###############################################################################
-#- pcmcia various
-#-###############################################################################
-sub configure_pcmcia {
-    my ($modules_conf, $pcic) = @_;
-
-    #- try to setup pcmcia if cardmgr is not running.
-    my $running if 0;
-    return if $running;
-    $running = 1;
-
-    log::l("i try to configure pcmcia services");
-
-    symlink "/tmp/stage2/$_", $_ foreach "/etc/pcmcia";
-
-    #- ds is an alias for pcmcia in recent 2.6 kernels
-    #- but we don't have modules.alias in install, so try to load both
-    eval { modules::load('pcmcia', $pcic, 'ds', 'pcmcia') };
-
-    #- run cardmgr in foreground while it is configuring the card.
-    run_program::run("cardmgr", "-f", "-m", "/modules");
-    sleep(3);
-    
-    #- make sure to be aware of loaded module by cardmgr.
-    modules::read_already_loaded($modules_conf);
-}
-
-
-1;
diff --git a/perl-install/install_gtk.pm b/perl-install/install_gtk.pm
deleted file mode 100644
index ca0d8ba6a..000000000
--- a/perl-install/install_gtk.pm
+++ /dev/null
@@ -1,312 +0,0 @@
-package install_gtk; # $Id$
-
-use diagnostics;
-use strict;
-
-use ugtk2;
-use mygtk2;
-use common;
-use lang;
-use devices;
-
-#-#####################################################################################
-#-INTERN CONSTANT
-#-#####################################################################################
-
-#- if we're running for the doc team, we want screenshots with
-#- a good B&W contrast: we'll override values of our theme
-my $theme_overriding_for_doc = q(style "galaxy-default"
-{
-    base[SELECTED]    = "#E0E0FF"
-    base[ACTIVE]      = "#E0E0FF"
-    base[PRELIGHT]    = "#E0E0FF"
-    bg[SELECTED]      = "#E0E0FF"
-    bg[ACTIVE]        = "#E0E0FF"
-    bg[PRELIGHT]      = "#E0E0FF"
-    text[ACTIVE]      = "#000000"
-    text[PRELIGHT]    = "#000000"
-    text[SELECTED]    = "#000000"
-    fg[SELECTED]      = "#000000"
-}
-
-style "white-on-blue"
-{
-  base[NORMAL] = { 0.93, 0.93, 0.93 }
-  bg[NORMAL] = { 0.93, 0.93, 0.93 }
-    
-  text[NORMAL] = "#000000"
-  fg[NORMAL] = "#000000"
-}
-
-style "background"
-{
-  bg[NORMAL] = { 0.93, 0.93, 0.93 }
-}
-
-style "background-logo"
-{
-  bg[NORMAL] = { 0.70, 0.70, 0.70 }
-}
-widget "*logo*" style "background-logo"
-
-);
-
-#------------------------------------------------------------------------------
-sub load_rc {
-    my ($o, $name) = @_;
-
-    my $f = $name;
-    -r $name or $f = find { -r $_ } map { "$_/themes-$name.rc" } ("share", $ENV{SHARE_PATH}, dirname(__FILE__));
-    if ($f) {
-	Gtk2::Rc->parse_string($o->{doc} ? $theme_overriding_for_doc : scalar cat_($f));
-   }
-
-    if ($::move) {
-        #- override selection color since we will not do inverse-video on the text when it's images
-	Gtk2::Rc->parse_string(q(
-style "galaxy-default"
-{
-    base[ACTIVE]      = "#CECECE"
-    base[SELECTED]    = "#CECECE"
-    text[ACTIVE]      = "#000000"
-    text[PRELIGHT]    = "#000000"
-    text[SELECTED]    = "#000000"
-}
-));
-    }
-}
-
-#------------------------------------------------------------------------------
-sub load_font {
-    my ($o) = @_;
-
-    if (lang::text_direction_rtl()) {
-	Gtk2::Widget->set_default_direction('rtl'); 
-	my ($x, $y) = $::WizardWindow->get_position;
-	my ($width) = $::WizardWindow->get_size;
-	$::WizardWindow->move($::rootwidth - $width - $x, $y);
-    }
-
-    Gtk2::Rc->parse_string(q(
-style "default-font" 
-{
-   font_name = ") . lang::l2pango_font($o->{locale}{lang}) . q("
-}
-widget "*" style "default-font"
-
-));
-}
-
-#------------------------------------------------------------------------------
-sub default_theme {
-    my ($o) = @_;
-    $::move ? '' :
-    $o->{simple_themes} || $o->{vga16} ? 'blue' : 'galaxy';
-}
-
-sub install_theme {
-    my ($o) = @_;
-
-    load_rc($o, $o->{theme} ||= default_theme($o));
-    load_font($o);
-
-    if (!$::move) {
-	my $win = gtknew('Window', widget_name => 'background');
-	$win->realize;
-	mygtk2::set_root_window_background_with_gc($win->style->bg_gc('normal'));
-    }
-}
-
-#------------------------------------------------------------------------------
-my %steps;
-sub create_steps_window {
-    my ($o) = @_;
-
-    return if $::stepswidth == 0;
-
-    $o->{steps_window} and $o->{steps_window}->destroy;
-
-    $steps{$_} ||= gtknew('Pixbuf', file => "steps_$_") foreach qw(on off);
-    my $category = sub { 
-	gtknew('HBox', children_tight => [ 
-	    gtknew('Label', text => $_[0], widget_name => 'Step-categories')
-	]);
-    };
-
-    my @l = $category->(N("System installation"));
-    foreach (grep { !eval $o->{steps}{$_}{hidden} } @{$o->{orderedSteps}}) {
-	if ($_ eq 'setRootPassword') {
-	    push @l, '', $category->(N("System configuration"));
-	}
-	my $img = gtknew('Image', file => 'steps_off.png');
-	$steps{steps}{$_}{img} = $img;
-	push @l, gtknew('HBox', spacing => 7, children_tight => [ '', '', $img, translate($o->{steps}{$_}{text}) ]);					      
-    }
-
-    my $offset = 20;
-    $o->{steps_window} =
-      gtknew('Window', width => ($::stepswidth - $offset), widget_name => 'Steps',
-	     position => [ lang::text_direction_rtl() ? $::rootwidth - $::stepswidth : $offset, 150 ],
-	     child => gtknew('VBox', spacing => 6, children_tight => \@l));
-    $o->{steps_window}->show;
-}
-
-sub update_steps_position {
-    my ($o) = @_;
-    return if !$steps{steps};
-    my $last_step;
-    foreach (@{$o->{orderedSteps}}) {
-	exists $steps{steps}{$_} or next;
-	if ($o->{steps}{$_}{entered} && !$o->{steps}{$_}{done}) {
-	    $steps{steps}{$_}{img}->set_from_pixbuf($steps{on});
-	    $last_step and $steps{steps}{$last_step}{img}->set_from_pixbuf($steps{off});
-	    return;
-	}
-	$last_step = $_;
-    }
-}
-
-#------------------------------------------------------------------------------
-sub create_logo_window {
-    my ($o) = @_;
-
-    return if $::logowidth == 0 || $::move;
-
-    mygtk2::may_destroy($o->{logo_window});
-
-    my $file = $o->{meta_class} eq 'firewall' ? "logo-mandrake-Firewall.png" : "logo-mandrake.png";
-
-    $o->{logo_window} =
-      gtknew('Window', 
-	     width => $::logowidth, height => $::logoheight, 
-	     widget_name => 'logo',
-	     child => gtknew('Image', file => $file),
-	 );
-    $o->{logo_window}->show;
-}
-
-#------------------------------------------------------------------------------
-sub init_gtk {
-    my ($o) = @_;
-
-    symlink("/tmp/stage2/etc/$_", "/etc/$_") foreach qw(gtk-2.0 pango fonts);
-
-    if ($o->{vga16}) {
-        #- inactivate antialias in VGA16 because it makes fonts look worse
-        output('/tmp/fonts.conf',
-q(<fontconfig>
-<include>/etc/fonts/fonts.conf</include>
-<match target="font"><edit name="antialias"><bool>false</bool></edit></match>
-</fontconfig>
-));
-        $ENV{FONTCONFIG_FILE} = '/tmp/fonts.conf';
-    }
-
-    Gtk2->init;
-    Gtk2->set_locale;
-}
-
-#------------------------------------------------------------------------------
-sub init_sizes() {
-    ($::rootwidth,  $::rootheight)    = (Gtk2::Gdk->screen_width, Gtk2::Gdk->screen_height);
-    $::stepswidth = $::rootwidth <= 640 ? 0 : 200 if !$::move;
-    ($::logowidth, $::logoheight) = $::rootwidth <= 640 ? (0, 0) : (500, 40);
-    ($::windowwidth, $::windowheight) = ($::rootwidth - $::stepswidth, $::rootheight - $::helpheight - $::logoheight);
-    ($::real_windowwidth, $::real_windowheight) = (576, 418);
-    $::move and $::windowwidth -= 100;
-}
-
-sub handle_unsafe_mouse {
-    my ($o, $window) = @_;
-
-    $o->{mouse}{unsafe} or return;
-
-    $window->add_events('pointer-motion-mask');
-    my $signal; $signal = $window->signal_connect(motion_notify_event => sub {
-	delete $o->{mouse}{unsafe};
-	log::l("unsetting unsafe mouse");
-	$window->signal_handler_disconnect($signal);
-    });
-}
-
-sub special_shortcuts {
-    my (undef, $event) = @_;
-    my $d = ${{ $Gtk2::Gdk::Keysyms{F2} => 'screenshot', $Gtk2::Gdk::Keysyms{Delete} => 'restart' }}{$event->keyval};
-    if ($d eq 'screenshot') {
-	install_any::take_screenshot($::o);
-    } elsif ($d eq 'restart' && member('control-mask', @{$event->state}) && member('mod1-mask', @{$event->state})) {
-	log::l("restarting install");
-	ugtk2->exit(0x35);
-    }
-    0;
-}
-
-#------------------------------------------------------------------------------
-sub createXconf {
-    my ($file, $mouse_type, $mouse_dev, $_wacom_dev, $Driver) = @_;
-
-    symlinkf(devices::make($mouse_dev), "/dev/mouse") if $mouse_dev ne 'none';
-
-    #- needed for imlib to start on 8-bit depth visual.
-    symlink("/tmp/stage2/etc/imrc", "/etc/imrc");
-    symlink("/tmp/stage2/etc/im_palette.pal", "/etc/im_palette.pal");
-
-    #- remove "error opening security policy file" warning
-    symlink("/tmp/stage2/etc/X11", "/etc/X11");
-
-if ($Driver) {
-     output($file, sprintf(<<'END', ($::globetrotter ? "" : 'Option "XkbDisable"'), $mouse_type, $Driver, $Driver eq 'fbdev' ? '"default"' : '"800x600" "640x480"'));
-Section "Files"
-   FontPath   "/usr/X11R6/lib/X11/fonts:unscaled"
-EndSection
-
-Section "InputDevice"
-    Identifier "Keyboard"
-    Driver "keyboard"
-    %s
-    Option "XkbModel" "pc105"
-    Option "XkbLayout" ""
-EndSection
-
-Section "InputDevice"
-    Identifier "Mouse"
-    Driver "mouse"
-    Option "Protocol" "%s"
-    Option "Device" "/dev/mouse"
-    Option "ZAxisMapping" "4 5"
-EndSection
-
-Section "Monitor"
-    Identifier "monitor"
-    HorizSync 31.5-35.5
-    VertRefresh 50-70
-EndSection
-
-Section "Device"
-    Identifier  "device"
-    Driver      "%s"
-EndSection
-
-Section "Screen"
-    Identifier "screen"
-    Device "device"
-    Monitor "monitor"
-    DefaultColorDepth 16
-    Subsection "Display"
-        Depth 16
-        Modes %s
-    EndSubsection
-EndSection
-
-Section "ServerLayout"
-    Identifier "layout"
-    Screen "screen"
-    InputDevice "Mouse" "CorePointer"
-    InputDevice "Keyboard" "CoreKeyboard"
-EndSection
-
-END
- }
-}
-
-1;
diff --git a/perl-install/install_interactive.pm b/perl-install/install_interactive.pm
deleted file mode 100644
index 8cc936d3d..000000000
--- a/perl-install/install_interactive.pm
+++ /dev/null
@@ -1,299 +0,0 @@
-package install_interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use partition_table;
-use partition_table::raw;
-use fs::type;
-use detect_devices;
-use install_steps;
-use install_any;
-use devices;
-use fsedit;
-use log;
-
-
-sub tellAboutProprietaryModules {
-    my ($o) = @_;
-    my @l = grep { $_ } map { $_->{driver} =~ /^Bad:(.*)/ && $1 } detect_devices::probeall();
-    $o->ask_warn('', formatAlaTeX(
-N("Some hardware on your computer needs ``proprietary'' drivers to work.
-You can find some information about them at: %s", join(", ", @l)))) if @l;
-}
-
-#- unit of $mb is mega bytes, min and max are in sectors, this
-#- function is used to convert back to sectors count the size of
-#- a partition ($mb) given from the interface (on Resize or Create).
-#- modified to take into account a true bounding with min and max.
-sub from_Mb {
-    my ($mb, $min, $max) = @_;
-    $mb <= $min >> 11 and return $min;
-    $mb >= $max >> 11 and return $max;
-    $mb * 2048;
-}
-
-sub partition_with_diskdrake {
-    my ($o, $all_hds, $nowizard) = @_;
-    my $ok; 
-
-    do {
-	$ok = 1;
-	my $do_force_reload = sub {
-	    $o->{all_hds} = fs::get::empty_all_hds();
-	    install_any::getHds($o, $o);
-	    $all_hds = $o->{all_hds};
-	    $o->{all_hds};
-	};
-	require diskdrake::interactive;
-	{
-	    local $::expert = $::expert;
-	    diskdrake::interactive::main($o, $all_hds, $nowizard, $do_force_reload, $o->interactive_help_sub_display_id('partition_with_diskdrake'));
-	}
-	if (delete $o->{wizard}) {
-	    partitionWizard($o, 'nodiskdrake') or redo;
-	    return 1;
-	}
-	my @fstab = fs::get::fstab($all_hds);
-	
-	unless (fs::get::root_(\@fstab)) {
-	    $ok = 0;
-	    $o->ask_okcancel('', N("You must have a root partition.
-For this, create a partition (or click on an existing one).
-Then choose action ``Mount point'' and set it to `/'"), 1) or return;
-	}
-	if (!any { isSwap($_) } @fstab) {
-	    $ok &&= $o->ask_okcancel('', N("You do not have a swap partition.\n\nContinue anyway?"));
-	}
-	if (arch() =~ /ia64/ && !fs::get::has_mntpoint("/boot/efi", $all_hds)) {
-	    $o->ask_warn('', N("You must have a FAT partition mounted in /boot/efi"));
-	    $ok = '';
-	}
-    } until $ok;
-    1;
-}
-
-sub partitionWizardSolutions {
-    my ($o, $all_hds) = @_;
-    my $hds = $all_hds->{hds};
-    my $fstab = [ fs::get::fstab($all_hds) ];
-    my @wizlog;
-    my (%solutions);
-
-    my $min_linux = 400 << 11;
-    my $max_linux = 2000 << 11;
-    my $min_swap = 50 << 11;
-    my $max_swap = 300 << 11;
-    my $min_freewin = 100 << 11;
-
-    # each solution is a [ score, text, function ], where the function retunrs true if succeeded
-
-    my @hds_rw = grep { !$_->{readonly} } @$hds;
-    my @hds_can_add = grep { $_->can_raw_add } @hds_rw;
-    if (fs::get::hds_free_space(@hds_can_add) > $min_linux) {
-	$solutions{free_space} = [ 20, N("Use free space"), sub { fsedit::auto_allocate($all_hds, $o->{partitions}); 1 } ];
-    } else { 
-	push @wizlog, N("Not enough free space to allocate new partitions") . ": " .
-	  (@hds_can_add ? 
-	   fs::get::hds_free_space(@hds_can_add) . " < $min_linux" :
-	   "no harddrive on which partitions can be added");
-    }
-
-    if (my @truefs = grep { isTrueLocalFS($_) } @$fstab) {
-	#- value twice the ext2 partitions
-	$solutions{existing_part} = [ 6 + @truefs + @$fstab, N("Use existing partitions"), sub { $o->ask_mntpoint_s($fstab) } ];
-    } else {
-	push @wizlog, N("There is no existing partition to use");
-    }
-
-    my @fats = grep { $_->{fs_type} eq 'vfat' } @$fstab;
-    fs::df($_) foreach @fats;
-    if (my @ok_forloopback = sort { $b->{free} <=> $a->{free} } grep { $_->{free} > $min_linux + $min_swap + $min_freewin } @fats) {
-	$solutions{loopback} = 
-	  [ -10 - @fats, N("Use the Windows partition for loopback"), 
-	    sub { 
-		my ($s_root, $s_swap);
-		my $part = $o->ask_from_listf('', N("Which partition do you want to use for Linux4Win?"), \&partition_table::description, \@ok_forloopback) or return;
-		$max_swap = $min_swap + 1 if $part->{free} - $max_swap < $min_linux;
-		$o->ask_from('', N("Choose the sizes"), [ 
-		   { label => N("Root partition size in MB: "), val => \$s_root, min => $min_linux >> 11, max => min($part->{free} - $max_swap, $max_linux) >> 11, type => 'range' },
-		   { label => N("Swap partition size in MB: "), val => \$s_swap, min => $min_swap >> 11,  max => $max_swap >> 11, type => 'range' },
-		]) or return;
-		push @{$part->{loopback}}, 
-		  { fs_type => 'ext3', loopback_file => '/lnx4win/linuxsys.img', mntpoint => '/',    size => $s_root << 11, loopback_device => $part, notFormatted => 1 },
-		  { fs_type => 'swap', loopback_file => '/lnx4win/swapfile',     mntpoint => 'swap', size => $s_swap << 11, loopback_device => $part, notFormatted => 1 };
-		fsedit::recompute_loopbacks($all_hds);
-		1;
-	    } ];
-    } else {
-	push @wizlog, N("There is no FAT partition to use as loopback (or not enough space left)") .
-	  (@fats ? "\nFAT partitions:" . join('', map { "\n  $_->{device} $_->{free} (" . ($min_linux + $min_swap + $min_freewin) . ")" } @fats) : '');
-    }
-
-    
-    if (my @ok_for_resize_fat = grep { isFat_or_NTFS($_) && !fs::get::part2hd($_, $all_hds)->{readonly} } @$fstab) {
-	$solutions{resize_fat} = 
-	  [ 6 - @ok_for_resize_fat, N("Use the free space on the Windows partition"),
-	    sub {
-		my $part = $o->ask_from_listf_raw({ messages => N("Which partition do you want to resize?"),
-						    interactive_help_id => 'resizeFATChoose',
-						  }, \&partition_table::description, \@ok_for_resize_fat) or return;
-		my $hd = fs::get::part2hd($part, $all_hds);
-		my $resize_fat = eval {
-		    my $pkg = $part->{fs_type} eq 'vfat' ? do { 
-			require resize_fat::main;
-			'resize_fat::main';
-		    } : do {
-			require diskdrake::resize_ntfs;
-			'diskdrake::resize_ntfs';
-		    };
-		    $pkg->new($part->{device}, devices::make($part->{device}));
-		};
-		$@ and die N("The FAT resizer is unable to handle your partition, 
-the following error occurred: %s", formatError($@));
-		my $min_win = do {
-		    my $_w = $o->wait_message(N("Resizing"), N("Computing the size of the Windows partition"));
-		    $resize_fat->min_size;
-		};
-		#- make sure that even after normalizing the size to cylinder boundaries, the minimun will be saved,
-		#- this save at least a cylinder (less than 8Mb).
-		$min_win += partition_table::raw::cylinder_size($hd);
-
-		$part->{size} > $min_linux + $min_swap + $min_freewin + $min_win or die N("Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandriva Linux installation.");
-		$o->ask_okcancel('', formatAlaTeX(
-                                            #-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-                                            N("WARNING!
-
-DrakX will now resize your Windows partition. Be careful: this
-operation is dangerous. If you have not already done so, you
-first need to exit the installation, run \"chkdsk c:\" from a
-Command Prompt under Windows (beware, running graphical program
-\"scandisk\" is not enough, be sure to use \"chkdsk\" in a
-Command Prompt!), optionally run defrag, then restart the
-installation. You should also backup your data.
-When sure, press Ok."))) or return;
-
-		my $mb_size = $part->{size} >> 11;
-		$o->ask_from('', N("Which size do you want to keep for Windows on"), [
-                   { label => N("partition %s", partition_table::description($part)), val => \$mb_size, min => $min_win >> 11, max => ($part->{size} - $min_linux - $min_swap) >> 11, type => 'range' },
-                ]) or return;
-
-		my $oldsize = $part->{size};
-		$part->{size} = from_Mb($mb_size, $min_win, $part->{size});
-
-		$hd->adjustEnd($part);
-
-		eval { 
-		    my $_w = $o->wait_message(N("Resizing"), N("Resizing Windows partition"));
-		    $resize_fat->resize($part->{size});
-		};
-		if (my $err = $@) {
-		    $part->{size} = $oldsize;
-		    die N("FAT resizing failed: %s", formatError($err));
-		}
-
-		$o->ask_warn('', N("To ensure data integrity after resizing the partition(s), 
-filesystem checks will be run on your next boot into Windows(TM)")) if $part->{fs_type} ne 'vfat';
-
-		set_isFormatted($part, 1);
-		partition_table::will_tell_kernel($hd, resize => $part); #- down-sizing, write_partitions is not needed
-		partition_table::adjust_local_extended($hd, $part);
-		partition_table::adjust_main_extended($hd);
-
-		fsedit::auto_allocate($all_hds, $o->{partitions});
-		1;
-	    } ];
-    } else {
-	push @wizlog, N("There is no FAT partition to resize (or not enough space left)");
-    }
-
-    if (@$fstab && @hds_rw) {
-	$solutions{wipe_drive} =
-	  [ 10, fsedit::is_one_big_fat_or_NT($hds) ? N("Remove Windows(TM)") : N("Erase entire disk"), 
-	    sub {
-		my $hd = $o->ask_from_listf_raw({ messages => N("You have more than one hard drive, which one do you install linux on?"),
-						  interactive_help_id => 'takeOverHdChoose',
-						},
-						\&partition_table::description, \@hds_rw) or return;
-		$o->ask_okcancel_({ messages => N("ALL existing partitions and their data will be lost on drive %s", partition_table::description($hd)),
-				    interactive_help_id => 'takeOverHdConfirm' }) or return;
-		partition_table::raw::zero_MBR($hd);
-		fsedit::auto_allocate($all_hds, $o->{partitions});
-		1;
-	    } ];
-    }
-
-    if (@hds_rw) {
-	$solutions{diskdrake} = [ 0, N("Custom disk partitioning"), sub { partition_with_diskdrake($o, $all_hds, 'nowizard') } ];
-    }
-
-    $solutions{fdisk} =
-      [ -10, N("Use fdisk"), sub { 
-	    $o->enter_console;
-	    foreach (@$hds) {
-		print "\n" x 10, N("You can now partition %s.
-When you are done, do not forget to save using `w'", partition_table::description($_));
-		print "\n\n";
-		my $pid = 0;
-		if (arch() =~ /ppc/) {
-			$pid = fork() or exec "pdisk", devices::make($_->{device});
-		} else {
-			$pid = fork() or exec "fdisk", devices::make($_->{device});
-		}			
-		waitpid($pid, 0);
-	    }
-	    $o->leave_console;
-	    0;
-	} ] if $o->{partitioning}{fdisk};
-
-    log::l("partitioning wizard log:\n", (map { ">>wizlog>>$_\n" } @wizlog));
-    %solutions;
-}
-
-sub partitionWizard {
-    my ($o, $b_nodiskdrake) = @_;
-
-    my %solutions = partitionWizardSolutions($o, $o->{all_hds});
-
-    delete $solutions{diskdrake} if $b_nodiskdrake;
-
-    my @solutions = sort { $b->[0] <=> $a->[0] } values %solutions;
-
-    my $level = $::expert ? -9999 : 0;
-    my @sol = grep { $_->[0] >= $level } @solutions;
-
-    log::l(''  . "solutions found: " . join('', map { $_->[1] } @sol) . 
-	   " (all solutions found: " . join('', map { $_->[1] } @solutions) . ")");
-
-    @solutions = @sol if @sol > 1;
-    log::l("solutions: ", int @solutions);
-    @solutions or $o->ask_warn('', N("I can not find any room for installing")), die 'already displayed';
-
-    log::l('HERE: ', join(',', map { $_->[1] } @solutions));
-    my $sol;
-    $o->ask_from_({ messages => N("The DrakX Partitioning wizard found the following solutions:"),
-		    interactive_help_id => 'doPartitionDisks',
-		  }, 
-		  [ { val => \$sol, list => \@solutions, format => sub { $_[0][1] }, type => 'list' } ]);
-    log::l("partitionWizard calling solution $sol->[1]");
-    my $ok = eval { $sol->[2]->() };
-    $@ and $o->ask_warn('', N("Partitioning failed: %s", formatError($@)));
-    $ok or goto &partitionWizard;
-    1;
-}
-
-sub upNetwork {
-    my ($o, $b_pppAvoided) = @_;
-    my $_w = $o->wait_message('', N("Bringing up the network"));
-    install_steps::upNetwork($o, $b_pppAvoided);
-}
-sub downNetwork {
-    my ($o, $b_pppOnly) = @_;
-    my $_w = $o->wait_message('', N("Bringing down the network"));
-    install_steps::downNetwork($o, $b_pppOnly);
-}
-
-
-
-1;
diff --git a/perl-install/install_messages.pm b/perl-install/install_messages.pm
deleted file mode 100644
index ae69b8d43..000000000
--- a/perl-install/install_messages.pm
+++ /dev/null
@@ -1,147 +0,0 @@
-package install_messages; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-sub main_license() {
-#-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-N("Introduction
-
-The operating system and the different components available in the Mandriva Linux distribution 
-shall be called the \"Software Products\" hereafter. The Software Products include, but are not 
-restricted to, the set of programs, methods, rules and documentation related to the operating 
-system and the different components of the Mandriva Linux distribution.
-
-
-1. License Agreement
-
-Please read this document carefully. This document is a license agreement between you and  
-Mandriva S.A. which applies to the Software Products.
-By installing, duplicating or using the Software Products in any manner, you explicitly 
-accept and fully agree to conform to the terms and conditions of this License. 
-If you disagree with any portion of the License, you are not allowed to install, duplicate or use 
-the Software Products. 
-Any attempt to install, duplicate or use the Software Products in a manner which does not comply 
-with the terms and conditions of this License is void and will terminate your rights under this 
-License. Upon termination of the License,  you must immediately destroy all copies of the 
-Software Products.
-
-
-2. Limited Warranty
-
-The Software Products and attached documentation are provided \"as is\", with no warranty, to the 
-extent permitted by law.
-Mandriva S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,
-incidental, direct or indirect damages whatsoever (including without limitation damages for loss of 
-business, interruption of business, financial loss, legal fees and penalties resulting from a court 
-judgment, or any other consequential loss) arising out of  the use or inability to use the Software 
-Products, even if Mandriva S.A. has been advised of the possibility or occurrence of such 
-damages.
-
-LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES
-
-To the extent permitted by law, Mandriva S.A. or its distributors will, in no circumstances, be 
-liable for any special, incidental, direct or indirect damages whatsoever (including without 
-limitation damages for loss of business, interruption of business, financial loss, legal fees 
-and penalties resulting from a court judgment, or any other consequential loss) arising out 
-of the possession and use of software components or arising out of  downloading software components 
-from one of Mandriva Linux sites  which are prohibited or restricted in some countries by local laws.
-This limited liability applies to, but is not restricted to, the strong cryptography components 
-included in the Software Products.
-
-
-3. The GPL License and Related Licenses
-
-The Software Products consist of components created by different persons or entities.  Most 
-of these components are governed under the terms and conditions of the GNU General Public 
-Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, 
-duplicate, adapt or redistribute the components which they cover. Please read carefully the terms 
-and conditions of the license agreement for each component before using any component. Any question 
-on a component license should be addressed to the component author and not to Mandriva.
-The programs developed by Mandriva S.A. are governed by the GPL License. Documentation written 
-by Mandriva S.A. is governed by a specific license. Please refer to the documentation for 
-further details.
-
-
-4. Intellectual Property Rights
-
-All rights to the components of the Software Products belong to their respective authors and are 
-protected by intellectual property and copyright laws applicable to software programs.
-Mandriva S.A. reserves its rights to modify or adapt the Software Products, as a whole or in 
-parts, by all means and for all purposes.
-\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of Mandriva S.A.  
-
-
-5. Governing Laws 
-
-If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this 
-portion is excluded from this contract. You remain bound by the other applicable sections of the 
-agreement.
-The terms and conditions of this License are governed by the Laws of France.
-All disputes on the terms of this license will preferably be settled out of court. As a last 
-resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.
-For any question on this document, please contact Mandriva S.A.  
-");
-}
-
-sub warning_about_patents() {
-N("Warning: Free Software may not necessarily be patent free, and some Free
-Software included may be covered by patents in your country. For example, the
-MP3 decoders included may require a licence for further usage (see
-http://www.mp3licensing.com for more details). If you are unsure if a patent
-may be applicable to you, check your local laws.");
-}
-sub com_license() { 
-#-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-N("
-Warning
-
-Please read carefully the terms below. If you disagree with any
-portion, you are not allowed to install the next CD media. Press 'Refuse' 
-to continue the installation without using these media.
-
-
-Some components contained in the next CD media are not governed
-by the GPL License or similar agreements. Each such component is then
-governed by the terms and conditions of its own specific license. 
-Please read carefully and comply with such specific licenses before 
-you use or redistribute the said components. 
-Such licenses will in general prevent the transfer,  duplication 
-(except for backup purposes), redistribution, reverse engineering, 
-de-assembly, de-compilation or modification of the component. 
-Any breach of agreement will immediately terminate your rights under 
-the specific license. Unless the specific license terms grant you such
-rights, you usually cannot install the programs on more than one
-system, or adapt it to be used on a network. In doubt, please contact 
-directly the distributor or editor of the component. 
-Transfer to third parties or copying of such components including the 
-documentation is usually forbidden.
-
-
-All rights to the components of the next CD media belong to their 
-respective authors and are protected by intellectual property and 
-copyright laws applicable to software programs.
-");
-}
-
-sub install_completed() {
-#-PO: keep the double empty lines between sections, this is formatted a la LaTeX
-N("Congratulations, installation is complete.
-Remove the boot media and press return to reboot.
-
-
-For information on fixes which are available for this release of Mandriva Linux,
-consult the Errata available from:
-
-
-%s
-
-
-Information on configuring your system is available in the post
-install chapter of the Official Mandriva Linux User's Guide.",
-N("http://www.mandrivalinux.com/en/errata.php3"));
-}
-
-1;
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
deleted file mode 100644
index 55bfd897d..000000000
--- a/perl-install/install_steps.pm
+++ /dev/null
@@ -1,1054 +0,0 @@
-package install_steps; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@filesToSaveForUpgrade @filesNewerToUseAfterUpgrade);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_any qw(:all);
-use partition_table;
-use detect_devices;
-use fs::type;
-use modules;
-use run_program;
-use lang;
-use keyboard;
-use fsedit;
-use loopback;
-use do_pkgs;
-use pkgs;
-use any;
-use log;
-
-our @ISA = qw(do_pkgs);
-
-@filesToSaveForUpgrade = qw(
-/etc/ld.so.conf /etc/fstab /etc/hosts /etc/conf.modules /etc/modules.conf
-);
-
-@filesNewerToUseAfterUpgrade = qw(
-/etc/profile
-);
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-sub new($$) {
-    my ($type, $o) = @_;
-
-    bless $o, ref($type) || $type;
-    return $o;
-}
-
-sub charsetChanged {
-    my ($_o) = @_;
-}
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub enteringStep {
-    my ($_o, $step) = @_;
-    log::l("starting step `$step'");
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    log::l("step `$step' finished");
-
-    if (-d "$o->{prefix}/root/drakx") {
-	eval { cp_af("/tmp/ddebug.log", "$o->{prefix}/root/drakx") };
-	output(install_any::auto_inst_file(), install_any::g_auto_install(1));
-    }
-
-    foreach my $s (@{$o->{orderedSteps}}) {
-	#- the reachability property must be recomputed each time to take
-	#- into account failed step.
-	next if $o->{steps}{$s}{done} && !$o->{steps}{$s}{redoable};
-
-	my $reachable = 1;
-	if (my $needs = $o->{steps}{$s}{needs}) {
-	    my @l = ref($needs) ? @$needs : $needs;
-	    $reachable = min(map { $o->{steps}{$_}{done} || 0 } @l);
-	}
-	$o->{steps}{$s}{reachable} = 1 if $reachable;
-    }
-    $o->{steps}{$step}{reachable} = $o->{steps}{$step}{redoable};
-
-    while (my $f = shift @{$o->{steps}{$step}{toBeDone} || []}) {
-	eval { &$f() };
-	$o->ask_warn(N("Error"), [
-N("An error occurred, but I do not know how to handle it nicely.
-Continue at your own risk."), formatError($@) ]) if $@;
-    }
-}
-
-sub errorInStep { 
-    my ($_o, $err) = @_;
-    print "error :(\n"; 
-    print "$err\n\n";
-    c::_exit(1);
-}
-sub kill_action {}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($o) = @_;
-
-    #- for auto_install compatibility with old $o->{lang}
-    $o->{locale} = lang::system_locales_to_ourlocale($o->{lang}, $o->{lang}) if $o->{lang};
-    $o->{locale}{langs} ||= { $o->{locale}{lang} => 1 };
-
-    if (!exists $o->{locale}{country}) {
-	my $h = lang::analyse_locale_name(lang::l2locale($o->{locale}{lang}));
-	$o->{locale}{country} = $h->{country} if $h->{country};
-	$o->{locale}{IM} = lang::get_default_im($o->{locale}{lang});
-    }
-
-    lang::set($o->{locale}, !$o->isa('interactive::gtk'));
-    add2hash_($o->{locale}, { utf8 => lang::utf8_should_be_needed($o->{locale}) });
-
-    log::l("selectLanguage: pack_langs: ", lang::pack_langs($o->{locale}{langs}), " utf8-flag: ", to_bool($o->{locale}{utf8}));
-
-    #- for auto_install compatibility with old $o->{keyboard} containing directly $o->{keyboard}{KEYBOARD}
-    $o->{keyboard} = { KEYBOARD => $o->{keyboard} } if $o->{keyboard} && !ref($o->{keyboard});
-
-    if (!$o->{keyboard} || $o->{keyboard}{unsafe}) {
-	$o->{keyboard} = keyboard::from_usb() || keyboard::lang2keyboard($o->{locale}{lang});
-	$o->{keyboard}{unsafe} = 1;
-	keyboard::setup($o->{keyboard});
-    }
-
-    $o->charsetChanged;
-
-    addToBeDone {
-	lang::write_langs($o->{locale}{langs});
-    } 'formatPartitions';
-    addToBeDone {
-	lang::write($o->{locale});
-    } 'installPackages';
-}
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($o) = @_;
-    $o->{keyboard}{KBCHARSET} = lang::l2charset($o->{locale}{lang});
-    keyboard::setup($o->{keyboard});
-
-    addToBeDone {
-	keyboard::write($o->{keyboard});
-    } 'installPackages' if !$o->{isUpgrade} || !$o->{keyboard}{unsafe};
-
-    if ($o->{raw_X}) {
-	require Xconfig::default;
-	Xconfig::default::config_keyboard($o->{raw_X}, $o->{keyboard});
-	$o->{raw_X}->write;
-    }
-}
-#------------------------------------------------------------------------------
-sub acceptLicense {}
-
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($o) = @_;
-    install_any::configure_pcmcia($o->{modules_conf}, $o->{pcmcia}) if $o->{pcmcia};
-    modules::load(modules::category2modules('disk/cdrom'));
-    modules::load_category($o->{modules_conf}, 'bus/firewire');
-    modules::load_category($o->{modules_conf}, 'disk/ide|scsi|hardware_raid|sata|firewire');
-
-    install_any::getHds($o);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($o) = @_;
-
-    if ($o->{partitioning}{use_existing_root} || $o->{isUpgrade}) {
-	# either one root is defined (and all is ok), or we take the first one we find
-	my $p = fs::get::root_($o->{fstab}) || (first(install_any::find_root_parts($o->{fstab}, $o->{prefix})) || die)->{part};
-	$o->{migrate_device_names} = install_any::use_root_part($o->{all_hds}, $p);
-    } 
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksBefore {
-    my ($o) = @_;
-    eval { 
-	eval { fs::umount("$o->{prefix}/sys") };
-	eval { fs::umount("$o->{prefix}/proc/bus/usb") };
-	eval { fs::umount("$o->{prefix}/proc") };
-	eval {          fs::umount_all($o->{fstab}, $o->{prefix}) };
-	eval { sleep 1; fs::umount_all($o->{fstab}, $o->{prefix}) } if $@; #- HACK
-    } if $o->{fstab} && !$::testing;
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisksAfter {
-    my ($o) = @_;
-
-    if (!$::testing) {
-	my $hds = $o->{all_hds}{hds};
-	partition_table::write($_) foreach @$hds;
-	$_->{rebootNeeded} and $o->rebootNeeded foreach @$hds;
-    }
-
-    fs::set_removable_mntpoints($o->{all_hds});
-    fs::mount_options::set_all_default($o->{all_hds}, %$o, lang::fs_options($o->{locale}))
-	if !$o->{isUpgrade};
-
-    $o->{fstab} = [ fs::get::fstab($o->{all_hds}) ];
-    fs::get::root_($o->{fstab}) or die "Oops, no root partition";
-
-    if (arch() =~ /ppc/ && detect_devices::get_mac_generation() =~ /NewWorld/) {
-	die "Need bootstrap partition to boot system!" if !(defined $partition_table::mac::bootstrap_part);
-    }
-    
-    if (arch() =~ /ia64/ && !fs::get::has_mntpoint("/boot/efi", $o->{all_hds})) {
-	die N("You must have a FAT partition mounted in /boot/efi");
-    }
-
-    if ($o->{partitioning}{use_existing_root}) {
-	#- ensure those partitions are mounted so that they are not proposed in choosePartitionsToFormat
-	fs::mount_part($_, $o->{prefix}) foreach sort { $a->{mntpoint} cmp $b->{mntpoint} }
-						 grep { $_->{mntpoint} && maybeFormatted($_) } @{$o->{fstab}};
-    }
-
-    cat_("/proc/mounts") =~ m|(\S+)\s+/tmp/nfsimage| &&
-      !any { $_->{mntpoint} eq "/mnt/nfs" } @{$o->{all_hds}{nfss}} and
-	push @{$o->{all_hds}{nfss}}, { fs_type => 'nfs', mntpoint => "/mnt/nfs", device => $1, options => "noauto,ro,nosuid,soft,rsize=8192,wsize=8192" };
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($o) = @_;
-
-    if ($o->{partitioning}{auto_allocate}) {
-	catch_cdie { fsedit::auto_allocate($o->{all_hds}, $o->{partitions}) } sub { 1 };
-    }
-}
-
-#------------------------------------------------------------------------------
-
-sub ask_mntpoint_s {#-}}}
-    my ($_o, $fstab) = @_;
-
-    #- TODO: set the mntpoints
-
-    my %m; foreach (@$fstab) {
-	my $m = $_->{mntpoint};
-
-	$m && $m =~ m!^/! or next; #- there may be a lot of swaps or "none"
-
-	$m{$m} and die N("Duplicate mount point %s", $m);
-	$m{$m} = 1;
-
-	#- in case the type does not correspond, force it to ext3
-	fs::type::set_fs_type($_, 'ext3') if !isTrueFS($_) && !isOtherAvailableFS($_);
-    }
-    1;
-}
-
-
-sub rebootNeeded($) {
-    my ($_o) = @_;
-    log::l("Rebooting...");
-    c::_exit(0);
-}
-
-sub choosePartitionsToFormat($$) {
-    my ($_o, $fstab) = @_;
-
-    foreach (@$fstab) {
-	$_->{mntpoint} = "swap" if isSwap($_);
-	$_->{mntpoint} or next;
-	
-	add2hash_($_, { toFormat => $_->{notFormatted} }) if $_->{fs_type}; #- eg: do not set toFormat for isRawRAID (0xfd)
-        $_->{toFormatUnsure} ||= member($_->{mntpoint}, '/', '/usr');
-
-	if (!$_->{toFormat}) {
-	    my $fs_type = fs::type::fs_type_from_magic($_);
-	    if (!$fs_type || $fs_type ne $_->{fs_type}) {
-		log::l("setting toFormatUnsure for $_->{device} because <$_->{fs_type}> ne <$fs_type>");
-		$_->{toFormatUnsure} = 1;
-	    }
-	}
-    }
-}
-
-sub formatMountPartitions {
-    my ($o) = @_;
-    fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix}, undef);
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
-    my ($o, $rebuild_needed) = @_;
-
-    install_any::setPackages($o, $rebuild_needed);
-    pkgs::selectPackagesAlreadyInstalled($o->{packages});
-    $rebuild_needed and pkgs::selectPackagesToUpgrade($o->{packages});
-}
-
-sub deselectFoundMedia {
-    my (undef, $hdlists) = @_;
-    return ($hdlists, 0);
-}
-
-sub selectSupplMedia { '' }
-sub askSupplMirror { '' }
-
-sub choosePackages {
-    my ($o, $packages, $_compssUsers, $first_time) = @_;
-
-    #- now for upgrade, package that must be upgraded are
-    #- selected first, after is used the same scheme as install.
-
-    #- make sure we kept some space left for available else the system may
-    #- not be able to start (xfs at least).
-    my $available = install_any::getAvailableSpace($o);
-    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-    log::l(sprintf "available size %s (corrected %s)", formatXiB($available), formatXiB($availableCorrected));
-
-    add2hash_($o, { compssListLevel => 5 }) if !$::auto_install;
-
-    #- avoid destroying user selection of packages but only
-    #- for expert, as they may have done individual selection before.
-    if ($first_time || !$::expert) {
-	exists $o->{compssListLevel}
-	  and pkgs::setSelectedFromCompssList($packages, $o->{rpmsrate_flags_chosen}, $o->{compssListLevel}, $availableCorrected);
-    }
-    $availableCorrected;
-}
-
-sub upgrading_redhat() {
-    #- remove weird config files that bother Xconfig::* too much
-    unlink "$::prefix/etc/X11/XF86Config";
-    unlink "$::prefix/etc/X11/XF86Config-4";
-
-    sub prefering_mdk {
-	my ($lpkg, $rpkg_ver, $c) = @_;
-	my $lpkg_ver = $lpkg->version . '-' . $lpkg->release;
-	log::l($lpkg->name . ' ' . ': prefering ' . ($c == 1 ? "$lpkg_ver over $rpkg_ver" : "$rpkg_ver over $lpkg_ver"));
-    }
-
-    my $old_compare_pkg = \&URPM::Package::compare_pkg;
-    undef *URPM::Package::compare_pkg;
-    *URPM::Package::compare_pkg = sub {
-	my ($lpkg, $rpkg) = @_;
-	my $c = ($lpkg->release =~ /mdk$/ ? 1 : 0) - ($rpkg->release =~ /mdk$/ ? 1 : 0);
-	if ($c) {
-	    prefering_mdk($lpkg, $rpkg->version . '-' . $rpkg->release, $c);
-	    $c;
-	} else {
-	    &$old_compare_pkg;
-	}
-    };
-
-    my $old_compare = \&URPM::Package::compare;
-    undef *URPM::Package::compare;
-    *URPM::Package::compare = sub {
-	my ($lpkg, $rpkg_ver) = @_;
-	my $c = ($lpkg->release =~ /mdk$/ ? 1 : 0) - ($rpkg_ver =~ /mdk$/ ? 1 : 0);
-	if ($c) {
-	    prefering_mdk($lpkg, $rpkg_ver, $c);
-	    return $c;
-	}
-	&$old_compare;
-    };
-}
-
-sub beforeInstallPackages {
-    my ($o) = @_;
-
-    #- save these files in case of upgrade failure.
-    if ($o->{isUpgrade}) {
-	foreach (@filesToSaveForUpgrade) {
-	    unlink "$o->{prefix}/$_.mdkgisave";
-	    if (-e "$o->{prefix}/$_") {
-		eval { cp_af("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgisave") };
-	    }
-	}
-	foreach (@filesNewerToUseAfterUpgrade) {
-	    unlink "$o->{prefix}/$_.rpmnew";
-	}
-    }
-
-    #- mainly for upgrading redhat packages, but it can help other
-    my @should_not_be_dirs = qw(/usr/X11R6/lib/X11/xkb /usr/share/locale/zh_TW/LC_TIME /usr/include/GL);
-    my @should_be_dirs = qw(/etc/X11/xkb);
-    my @to_remove = (
-		     (grep { !-l $_ && -d $_          } map { "$::prefix$_" } @should_not_be_dirs),
-		     (grep { -l $_ || !-d $_ && -e $_ } map { "$::prefix$_" } @should_be_dirs),
-		    );
-    rm_rf(@to_remove);
-
-    if ($o->{isUpgrade} eq 'redhat') {
-	upgrading_redhat();
-    }
-
-    #- some packages need such files for proper installation.
-    install_any::write_fstab($o);
-
-    require network::network;
-    network::network::add2hosts("$o->{prefix}/etc/hosts", "localhost", "127.0.0.1");
-
-    log::l("setting excludedocs to $o->{excludedocs}");
-    substInFile { s/%_excludedocs.*//; $_ .= "%_excludedocs yes\n" if eof && $o->{excludedocs} } "$o->{prefix}/etc/rpm/macros";
-
-    #- add oem theme if the files exists.
-    mkdir_p("$o->{prefix}/usr/share");
-    install_any::getAndSaveFile("install/oem-theme.rpm", "$o->{prefix}/usr/share/oem-theme.rpm");
-}
-
-#- returns number of packages installed, 0 if none were selected.
-sub pkg_install {
-    my ($o, @l) = @_;
-    log::l("selecting packages " . join(" ", @l));
-    require pkgs;
-    if ($::testing) {
-	log::l(qq(selecting package "$_")) foreach @l;
-    } else {
-	$o->{packages}{rpmdb} ||= pkgs::rpmDbOpen();
-	pkgs::selectPackage($o->{packages}, pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found") foreach @l;
-    }
-    my @toInstall = pkgs::packagesToInstall($o->{packages});
-    if (@toInstall) {
-	log::l("installing packages");
-	$o->installPackages;
-    } else {
-	log::l("all packages selected are already installed, nothing to do");
-	0;
-    }
-}
-
-sub pkg_install_if_requires_satisfied {
-    my ($o, @l) = @_;
-    require pkgs;
-    $o->{packages}{rpmdb} ||= pkgs::rpmDbOpen();
-    foreach (@l) {
-	my %newSelection;
-	my $pkg = pkgs::packageByName($o->{packages}, $_) || die "$_ rpm not found";
-	pkgs::selectPackage($o->{packages}, $pkg, 0, \%newSelection);
-	if (scalar(keys %newSelection) == 1) {
-	    pkgs::selectPackage($o->{packages}, $pkg);
-	} else {
-	    log::l("pkg_install_if_requires_satisfied: not selecting $_ because of ", join(", ", keys %newSelection));
-	}
-    }
-    $o->installPackages;
-}
-
-sub installPackages($$) { #- complete REWORK, TODO and TOCHECK!
-    my ($o) = @_;
-    my $packages = $o->{packages};
-
-    if (%{$packages->{state}{ask_remove} || {}}) {
-	log::l("removing : ", join ', ', keys %{$packages->{state}{ask_remove}});
-	pkgs::remove([ keys %{$packages->{state}{ask_remove}} ], $packages);
-    }
-
-    #- small transaction will be built based on this selection and depslist.
-    my @toInstall = pkgs::packagesToInstall($packages);
-
-    my $time = time();
-    $ENV{DURING_INSTALL} = 1;
-    pkgs::install($o->{isUpgrade}, \@toInstall, $packages);
-
-    any::writeandclean_ldsoconf($o->{prefix});
-    delete $ENV{DURING_INSTALL};
-    run_program::rooted_or_die($o->{prefix}, 'ldconfig');
-
-    eval {
-	run_program::rooted($o->{prefix}, 'gdk-pixbuf-query-loaders', '>', '/etc/gtk-2.0/gdk-pixbuf.loaders.' . (arch() =~ /64/ ? 'lib64' : 'lib'));
-	run_program::rooted($o->{prefix}, 'gtk-query-immodules-2.0', '>', '/etc/gtk-2.0/gtk.immodules.' . (arch() =~ /64/ ? 'lib64' : 'lib'));
-	run_program::rooted($o->{prefix}, 'pango-querymodules-' . (arch() =~ /64/ ? '64' : '32'), '>', '/etc/pango/' . (arch() =~ /i.86/ ? 'i386' : arch()) . '/pango.modules');
-    };
-
-    log::l("Install took: ", formatTimeRaw(time() - $time));
-    install_any::log_sizes($o);
-    scalar(@toInstall); #- return number of packages installed.
-}
-
-sub afterInstallPackages($) {
-    my ($o) = @_;
-
-    die N("Some important packages did not get installed properly.
-Either your cdrom drive or your cdrom is defective.
-Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm\"
-") if any { m|read failed: Input/output error| } cat_("$o->{prefix}/root/drakx/install.log");
-
-    if (arch() !~ /^sparc/) { #- TODO restore it as may be needed for sparc
-	-x "$o->{prefix}/usr/bin/dumpkeys" or $::testing or die 
-"Some important packages did not get installed properly.
-
-Please switch to console 2 (using ctrl-alt-f2)
-and look at the log file /tmp/ddebug.log
-
-Consoles 1,3,4,7 may also contain interesting information";
-    }
-
-    #-  why not? cuz weather is nice today :-) [pixel]
-    common::sync(); common::sync();
-
-    #- generate /etc/lvmtab needed for rc.sysinit
-    run_program::rooted($o->{prefix}, 'lvm2', 'vgscan') if -e '/etc/lvmtab';
-
-    #- configure PCMCIA services if needed.
-    require harddrake::autoconf;
-    harddrake::autoconf::pcmcia($o->{pcmcia});
-
-    #- for mandrake_firstime
-    touch "$o->{prefix}/var/lock/TMP_1ST";
-
-    any::config_dvd($o->{prefix}, 0);
-    any::config_mtools($o->{prefix});
-
-    #- make sure wins is disabled in /etc/nsswitch.conf
-    #- else if eth0 is not existing, glibc segfaults.
-    substInFile { s/\s*wins// if /^\s*hosts\s*:/ } "$o->{prefix}/etc/nsswitch.conf";
-
-    #- make sure some services have been enabled (or a catastrophic restart will occur).
-    #- these are normally base package post install scripts or important services to start.
-    run_program::rooted($o->{prefix}, "chkconfig", "--add", $_) foreach
-			qw(random netfs network rawdevices sound kheader keytable syslog crond portmap);
-
-    if ($o->{mouse}{device} =~ /ttyS/) {
-	log::l("disabling gpm for serial mice (does not get along nicely with X)");
-	run_program::rooted($o->{prefix}, "chkconfig", "--del", "gpm"); 
-    }
-
-    #- install urpmi before as rpmdb will be opened, this will cause problem with update-menus.
-    $o->install_urpmi;
-
-    #- update menu scheme before calling update menus if desktop mode.
-    if ($o->{meta_class} eq 'desktop') {
-	run_program::rooted($o->{prefix}, "touch", "/etc/menu/do-not-create-menu-link");
-	run_program::rooted($o->{prefix}, "touch", "/etc/menu/enable_simplified");
-    } elsif (!$o->{isUpgrade}) {
-	run_program::rooted($o->{prefix}, "touch", "/etc/menu/do-not-create-menu-link");
-    }
-
-    if ($o->{pcmcia}) {
-	substInFile { s/.*(TaskBarShowAPMStatus).*/$1=1/ } "$o->{prefix}/usr/lib/X11/icewm/preferences";
-	eval { cp_af("$o->{prefix}/usr/share/applnk/System/kapm.kdelnk",
-		     "$o->{prefix}/etc/skel/Desktop/Autostart/kapm.kdelnk") };
-    }
-
-    if ($o->{brltty}) {
-	output("$o->{prefix}/etc/brltty.conf", <<EOF);
-braille-driver $o->{brltty}{driver}
-braille-device $o->{brltty}{device}
-text-table $o->{brltty}{table}
-EOF
-    }
-
-
-    install_any::disable_user_view() if $o->{security} >= 3 || $o->{authentication}{NIS};
-    run_program::rooted($o->{prefix}, "kdeDesktopCleanup");
-
-    foreach (list_skels($o->{prefix}, '.kde/share/config/kfmrc')) {
-	my $found;
-	substInFile {
-	    $found ||= /KFM Misc Defaults/;
-	    $_ .= 
-"[KFM Misc Defaults]
-GridWidth=85
-GridHeight=70
-" if eof && !$found;
-	} $_; 
-    }
-
-    #- move some file after an upgrade that may be seriously annoying.
-    #- and rename saved files to .mdkgiorig.
-    if ($o->{isUpgrade}) {
-	my $pkg = pkgs::packageByName($o->{packages}, 'rpm');
-	$pkg && ($pkg->flag_selected || $pkg->flag_installed) && $pkg->compare(">= 4.0") and pkgs::cleanOldRpmDb();
-
-	log::l("moving previous desktop files that have been updated to Trash of each user");
-	install_any::kdemove_desktop_file($o->{prefix});
-
-	foreach (@filesToSaveForUpgrade) {
-	    renamef("$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_.mdkgiorig")
-	      if -e "$o->{prefix}$_.mdkgisave";
-	}
-
-	foreach (@filesNewerToUseAfterUpgrade) {
-	    if (-e "$o->{prefix}/$_.rpmnew" && -e "$o->{prefix}/$_") {
-		renamef("$o->{prefix}/$_", "$o->{prefix}/$_.mdkgiorig");
-		renamef("$o->{prefix}/$_.rpmnew", "$o->{prefix}/$_");
-	    }
-	}
-    }
-
-    any::fix_broken_alternatives($o->{isUpgrade} eq 'redhat');
-
-    #- update theme directly from a package (simplest).
-    if (-s "$o->{prefix}/usr/share/oem-theme.rpm") {
-	run_program::rooted($o->{prefix}, "rpm", "-U", "/usr/share/oem-theme.rpm");
-	unlink "/usr/share/oem-theme.rpm";
-    }
-
-    #- call update-menus at the end of package installation
-    push @{$o->{waitpids}}, run_program::raw({ root => $o->{prefix}, detach => 1 }, "update-menus", "-n");
-
-    if ($o->{updatemodules}) {
-	$o->updatemodules($ENV{THIRDPARTY_DEVICE}, $ENV{THIRDPARTY_DIR});
-    }
-}
-
-sub install_urpmi {
-    my ($o) = @_;
-
-    my $pkg = pkgs::packageByName($o->{packages}, 'urpmi');
-    if ($pkg && ($pkg->flag_selected || $pkg->flag_installed)) {
-	install_any::install_urpmi($o->{method},
-				   $o->{packages},
-				   $o->{packages}{mediums});
-	pkgs::saveCompssUsers($o->{packages}, $o->{compssUsers});
-    }
-}
-
-sub updatemodules {
-    my ($_o, $dev, $rel_dir) = @_;
-    return if $::testing;
-
-    $dev = devices::make($dev) or log::l("updatemodules: bad device $dev"), return;
-
-    my $mount_dir = '/updatemodules';
-    find {
-	eval { fs::mount($dev, $mount_dir, $_, 0); 1 };
-    } 'ext2', 'vfat' or log::l("updatemodules: can't mount $dev"), return;
-
-    my $dir = "$mount_dir$rel_dir";
-    foreach my $kernel_version (all("$::prefix/lib/modules")) {
-	log::l("examining updated modules for kernel $kernel_version");
-	-d "$dir/$kernel_version" or next;
-	log::l("found updatable modules");
-	run_program::run("cd $dir/$kernel_version ; find -type f | cpio -pdu $::prefix/lib/modules/$kernel_version");
-	run_program::rooted($::prefix, 'depmod', '-a', '-F', "/boot/System.map-$kernel_version", $kernel_version);
-    }
-
-    my $category;
-    foreach (cat_("$dir/to_load")) {
-	chomp;
-	if (/^#/) {
-	    ($category) = $1 if /\[list_modules: (.*?)\]/;
-	} elsif ($category) {
-	    log::l("adding $_ to $category\n");
-	    my $r = \%list_modules::l;
-	    $r = $r->{$_} foreach split('/', $category);
-	    push @$r, $_;
-
-	    $category = '';
-	}
-    }
-
-    fs::umount($mount_dir);
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse($) {
-    my ($_o) = @_;
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($o) = @_;
-    require network::network;
-    network::network::configureNetwork2($o, $o->{modules_conf}, $o->{prefix}, $o->{netc}, $o->{intf});
-    if ($o->{method} =~ /ftp|http|nfs/) {
-	$o->{netcnx}{type} = 'lan';
-	$o->{netcnx}{$_} = $o->{netc}{$_} foreach qw(NET_DEVICE NET_INTERFACE);
-    }
-
-    configure_firewall($o) if !$o->{isUpgrade};
-}
-
-sub configure_firewall {
-    my ($o) = @_;
-
-    if (!exists $o->{firewall_ports} && $o->{security} >= 3) {
-	require network::drakfirewall;
-	$o->{firewall_ports} = network::drakfirewall::default_ports($o->do_pkgs);
-    }
-    if ($o->{firewall_ports}) {
-	require network::drakfirewall;
-	network::drakfirewall::set_ports($o->do_pkgs, 0, $o->{firewall_ports});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub installUpdates {
-    my ($o) = @_;
-    my $u = $o->{updates} or return; $u->{updates} or return;
-
-    upNetwork($o);
-    require crypto;
-    crypto::getPackages($o->{packages}, $u->{mirror}) and
-	$o->pkg_install(@{$u->{packages} || []});
-
-    #- re-install urpmi with update security medium.
-    $o->install_urpmi;
-}
-
-sub summaryBefore {}
-
-sub summary {
-    my ($o) = @_;
-    configureTimezone($o);
-    configurePrinter($o) if $o->{printer} && $o->{printer}{SPOOLER};
-}
-
-sub summaryAfter {
-    my ($_o) = @_;
-}
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
-    my ($o) = @_;
-    install_any::preConfigureTimezone($o);
-
-    $o->pkg_install('ntp') if $o->{timezone}{ntp};
-
-    require timezone;
-    timezone::write($o->{timezone});
-}
-
-#------------------------------------------------------------------------------
-sub configureServices {
-    my ($o) = @_;
-    if ($o->{services}) {
-	require services;
-	services::doit($o, $o->{services});
-    }
-}
-#------------------------------------------------------------------------------
-sub configurePrinter {
-    my ($o) = @_;
-    eval {
-	$o->do_pkgs->install('foomatic-filters', 'foomatic-db-engine', 'foomatic-db', 'foomatic-db-hpijs', 'gutenprint-foomatic', 'postscript-ppds', 'printer-utils', 'printer-filters', 'printer-testpages',
-			     if_($o->do_pkgs->is_installed('gimp'), 'gutenprint-gimp2'));
-    };
-    if ($@ =~ /rpm not found/) {
-	log::l("ERROR: $@");
-	if ($o->{printer}) {
-	    require printer::printerdrake;
-	    printer::printerdrake::final_cleanup($o->{printer});
-	}
-	return;
-    }
-
-    require printer::main;
-    eval { add2hash($o->{printer} ||= {}, printer::main::getinfo($o->{prefix})) }; #- get existing configuration.
-
-    require printer::printerdrake;
-    printer::printerdrake::install_spooler($o->{printer}, $o->{security}, $o->do_pkgs);
-
-    foreach (values %{$o->{printer}{configured} || {}}) {
-	log::l("configuring printer queue " . $_->{queuedata}{queue} || $_->{QUEUE});
-	#- when copy is so adulee (sorry french taste :-)
-	#- and when there are some configuration in one place and in another place...
-	$o->{printer}{currentqueue} = {};
-	printer::main::copy_printer_params($_->{queuedata}, $o->{printer}{currentqueue});
-	printer::main::copy_printer_params($_, $o->{printer});
-	#- setup all configured queues, which is not the case interactively where
-	#- only the working queue is setup on configuration.
-	printer::main::configure_queue($o->{printer});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($o) = @_;
-    $o->{superuser} ||= {};
-    require authentication;
-    authentication::set_root_passwd($o->{superuser}, $o->{authentication});
-    install_any::set_authentication($o);
-}
-
-#------------------------------------------------------------------------------
-
-sub addUser {
-    my ($o) = @_;
-    my $users = $o->{users} ||= [];
-
-    if ($::prefix) {
-	#- getpwnam, getgrnam, getgrid works
-	symlinkf("$::prefix/etc/passwd", '/etc/passwd');
-	symlinkf("$::prefix/etc/group", '/etc/group');
-    }
-
-    any::add_users($users, $o->{authentication});
-
-    if ($o->{autologin}) {
-	$o->{desktop} ||= first(any::sessions());
-	$o->pkg_install("autologin") if !member($o->{desktop}, 'KDE', 'GNOME');
-    }
-    any::set_autologin($o->{autologin}, $o->{desktop});
-
-    install_any::disable_user_view() if @$users == ();
-}
-
-#------------------------------------------------------------------------------
-sub readBootloaderConfigBeforeInstall {
-    my ($o) = @_;
-
-    require bootloader;
-    add2hash($o->{bootloader} ||= {}, bootloader::read($o->{all_hds}));
-
-    $o->{bootloader}{bootUnsafe} = 0 if $o->{bootloader}{boot}; #- when upgrading, do not ask where to install the bootloader (mbr vs boot partition)
-}
-
-sub setupBootloaderBefore {
-    my ($o) = @_;
-
-    require bootloader;
-
-    #- remove previous ide-scsi lines
-    bootloader::modify_append($o->{bootloader}, sub {
-	my ($_simple, $dict) = @_;
-	@$dict = grep { $_->[1] ne 'ide-scsi' } @$dict;
-    });
-
-    if ($o->{miscellaneous}{HDPARM}) {
-	bootloader::set_append_with_key($o->{bootloader}, $_, 'autotune') foreach grep { /ide/ } all("/proc/ide");
-    }
-    if (cat_("/proc/cmdline") =~ /mem=nopentium/) {
-	bootloader::set_append_with_key($o->{bootloader}, mem => 'nopentium');
-    }
-    if (cat_("/proc/cmdline") =~ /\b(pci)=(\S+)/) {
-	bootloader::set_append_with_key($o->{bootloader}, $1, $2);
-    }
-    if (my ($acpi) = cat_("/proc/cmdline") =~ /\bacpi=(\w+)/) {
-	if ($acpi eq 'ht') {
-	    #- the user is using the default, which may not be the best
-	    my $year = detect_devices::computer_info()->{BIOS_Year};
-	    if (detect_devices::isLaptop() && $year >= 2002) {
-		log::l("forcing ACPI on a laptop with recent bios ($year)");
-		$acpi = '';
-	    }
-	}
-	bootloader::set_append_with_key($o->{bootloader}, acpi => $acpi);
-    }
-    if (cat_("/proc/cmdline") =~ /\bnoapic/) {
-	bootloader::set_append_simple($o->{bootloader}, 'noapic');
-    }
-    my ($MemTotal) = cat_("/proc/meminfo") =~ /^MemTotal:\s*(\d+)/m;
-    if (my ($biggest_swap) = sort { $b->{size} <=> $a->{size} } grep { isSwap($_) } @{$o->{fstab}}) {
-	log::l("MemTotal: $MemTotal < ", $biggest_swap->{size} / 2);
-	if ($MemTotal < $biggest_swap->{size} / 2) {
-	    bootloader::set_append_with_key($o->{bootloader}, resume => devices::make($biggest_swap->{device}));
-	}
-    }
-
-    #- check for valid fb mode to enable a default boot with frame buffer.
-    my $vga = $o->{allowFB} && (!detect_devices::matching_desc__regexp('3D Rage LT') &&
-                                !detect_devices::matching_desc__regexp('Rage Mobility [PL]') &&
-                                !detect_devices::matching_desc__regexp('i740') &&
-                                !detect_devices::matching_desc__regexp('Matrox') &&
-                                !detect_devices::matching_desc__regexp('Tseng.*ET6\d00') &&
-                                !detect_devices::matching_desc__regexp('SiS.*SG86C2.5') &&
-                                !detect_devices::matching_desc__regexp('SiS.*559[78]') &&
-                                !detect_devices::matching_desc__regexp('SiS.*300') &&
-                                !detect_devices::matching_desc__regexp('SiS.*540') &&
-                                !detect_devices::matching_desc__regexp('SiS.*6C?326') &&
-                                !detect_devices::matching_desc__regexp('SiS.*6C?236') &&
-                                !detect_devices::matching_desc__regexp('Voodoo [35]|Voodoo Banshee') && #- 3d acceleration seems to bug in fb mode
-                                !detect_devices::matching_desc__regexp('828[14][05].* CGC') #- i810 & i845 now have FB support during install but we disable it afterwards
-                               );
-    my $force_vga = $o->{allowFB} && (detect_devices::matching_desc__regexp('SiS.*630') || #- SiS 630 need frame buffer.
-                                      detect_devices::matching_desc__regexp('GeForce.*Integrated') #- needed for fbdev driver (hack).
-                                     );
-
-    #- propose the default fb mode for kernel fb, if aurora or bootsplash is installed.
-    my $need_fb = do {
-        my $p = pkgs::packageByName($o->{packages}, 'bootsplash');
-        $p && $p->flag_installed;
-    };
-    bootloader::suggest($o->{bootloader}, $o->{all_hds},
-                        vga_fb => ($force_vga || $vga && $need_fb) && $o->{vga}, 
-                        quiet => $o->{meta_class} ne 'server');
-
-    $o->{bootloader}{keytable} ||= keyboard::keyboard2kmap($o->{keyboard});
-}
-
-sub setupBootloader {
-    my ($o) = @_;
-
-    any::install_acpi_pkgs($o->do_pkgs, $o->{bootloader});
-
-    require bootloader;
-    bootloader::install($o->{bootloader}, $o->{all_hds});
-}
-
-#------------------------------------------------------------------------------
-sub configureXBefore {
-    my ($o) = @_;
-
-    #- keep this here if the package has to be updated.
-    $o->pkg_install("xorg-x11");
-}
-sub configureX {
-    my ($o) = @_;
-    configureXBefore($o);
-
-    require Xconfig::default;
-    $o->{raw_X} = Xconfig::default::configure($o->do_pkgs, $o->{keyboard}, $o->{mouse});
-
-    require Xconfig::main;
-    Xconfig::main::configure_everything_auto_install($o->{raw_X}, $o->do_pkgs, $o->{X}, install_any::X_options_from_o($o));
-    configureXAfter($o);
-}
-sub configureXAfter {
-    my ($o) = @_;
-    if ($o->{X}{default_depth} >= 16 && $o->{X}{resolution_wanted} >= 1024) {
-	log::l("setting large icon style for kde");
-	install_any::kderc_largedisplay($o->{prefix});
-    }
-}
-
-#------------------------------------------------------------------------------
-sub miscellaneousBefore {
-    my ($o) = @_;
-
-    my %s = getVarsFromSh("$o->{prefix}/etc/sysconfig/system");
-    $o->{miscellaneous}{HDPARM} = $s{HDPARM} if exists $s{HDPARM};
-    require security::level;
-    require security::various;
-    $o->{security} ||= security::level::get();
-    $o->{security_user} ||= security::various::config_security_user($o->{prefix});
-    $o->{libsafe} ||= security::various::config_libsafe($o->{prefix});
-
-    log::l("security $o->{security}");
-
-    add2hash_($o->{miscellaneous} ||= {}, { numlock => !detect_devices::isLaptop() });
-}
-sub miscellaneous {
-    my ($_o) = @_;
-    #- keep some given parameters
-    #-TODO
-}
-sub miscellaneousAfter {
-    my ($o) = @_;
-    add2hash_ $o, { useSupermount => $o->{security} < 4 ? 'magicdev' : 0 };
-
-    $ENV{SECURE_LEVEL} = $o->{security}; #- deprecated with chkconfig 1.3.4-2mdk, uses /etc/sysconfig/msec
-
-    addToBeDone {
-	setVarsInSh("$o->{prefix}/etc/sysconfig/system", { 
-            CLASS => $::expert && 'expert' || 'beginner',
-            SECURITY => $o->{security},
-	    META_CLASS => $o->{meta_class} || 'PowerPack',
-        });
-	substInFile { s/KEYBOARD_AT_BOOT=.*/KEYBOARD_AT_BOOT=yes/ } "$o->{prefix}/etc/sysconfig/usb" if detect_devices::usbKeyboards();
-
-    } 'installPackages';
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall { 
-    my ($o) = @_;
-    eval { 
-	my $report = '/root/drakx/report.bug';
-	unlink "$::prefix$report", "$::prefix$report.gz";
-	output "$::prefix$report", install_any::report_bug();
-	run_program::rooted($::prefix, 'gzip', $report);
-    };
-    install_any::getAndSaveAutoInstallFloppies($o, 1) if arch() !~ /^ppc/;
-    eval { output "$o->{prefix}/root/drakx/README", "This directory contains several installation-related files,
-mostly log files (very useful if you ever report a bug!).
-
-Beware that some Mandriva Linux tools rely on the contents of some
-of these files... so remove any file from here at your own
-risk!
-" };
-    #- wait for remaining processes.
-    foreach (@{$o->{waitpids}}) {
-	waitpid $_, 0;
-	log::l("pid $_ returned $?");
-    }
-    install_any::ejectCdrom();
-    install_any::log_sizes($o);
-}
-
-#------------------------------------------------------------------------------
-sub hasNetwork {
-    my ($o) = @_;
-    $o->{netcnx}{type} && $o->{netc}{NETWORKING} ne 'no' and return 1;
-    log::l("no network seems to be configured for internet ($o->{netcnx}{type},$o->{netc}{NETWORKING})");
-    0;
-}
-
-#------------------------------------------------------------------------------
-sub upNetwork {
-    my ($o, $b_pppAvoided) = @_;
-
-    #- do not destroy this file if prefix is '' or even '/' (could it happens ?).
-    if (length($o->{prefix}) > 1) {
-	-f "$o->{prefix}/etc/$_" && symlinkf("$o->{prefix}/etc/$_", "/etc/$_") foreach qw(resolv.conf protocols services);
-    }
-    member($o->{method}, qw(ftp http nfs)) and return 1;
-    $o->{modules_conf}->write;
-    if (hasNetwork($o)) {
-	if ($o->{netcnx}{type} =~ /adsl|lan|cable/) {
-	    log::l("starting network ($o->{netcnx}{type})");
-	    require network::netconnect;
-	    network::netconnect::start_internet($o);
-	    return 1;
-	} elsif (!$b_pppAvoided) {
-	    log::l("starting network (ppp: $o->{netcnx}{type})");
-	    eval { modules::load(qw(serial ppp bsd_comp ppp_deflate)) };
-	    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "start");
-	    require network::netconnect;
-	    network::netconnect::start_internet($o);
-	    return 1;
-	} else {
-	    log::l(qq(not starting network (b/c ppp avoided and type is "$o->{netcnx}{type})"));
-	}
-    }
-    $::testing;
-}
-
-#------------------------------------------------------------------------------
-sub downNetwork {
-    my ($o, $costlyOnly) = @_;
-
-    $o->{method} eq "ftp" || $o->{method} eq "http" || $o->{method} eq "nfs" and return 1;
-    $o->{modules_conf}->write;
-    if (hasNetwork($o)) {
-	if (!$costlyOnly) {
-	    require network::netconnect;
-	    network::netconnect::stop_internet($o);
-	    return 1;
-	} elsif ($o->{netc}{type} !~ /adsl|lan|cable/) {
-	    require network::netconnect;
-	    network::netconnect::stop_internet($o);
-	    run_program::rooted($o->{prefix}, "/etc/rc.d/init.d/syslog", "stop");
-	    eval { modules::unload(qw(ppp_deflate bsd_comp ppp serial)) };
-	    return 1;
-	}
-    }
-    $::testing;
-}
-
-#------------------------------------------------------------------------------
-sub cleanIfFailedUpgrade($) {
-    my ($o) = @_;
-
-    #- if an upgrade has failed, there should be .mdkgisave files around.
-    if ($o->{isUpgrade}) {
-	foreach (@filesToSaveForUpgrade) {
-	    if (-e "$o->{prefix}/$_" && -e "$o->{prefix}/$_.mdkgisave") {
-		rename "$o->{prefix}/$_", "$o->{prefix}/$_.mdkginew"; #- keep new files around in case !
-		rename "$o->{prefix}/$_.mdkgisave", "$o->{prefix}/$_";
-	    }
-	}
-    }
-}
-
-
-1;
diff --git a/perl-install/install_steps_auto_install.pm b/perl-install/install_steps_auto_install.pm
deleted file mode 100644
index 0933518cf..000000000
--- a/perl-install/install_steps_auto_install.pm
+++ /dev/null
@@ -1,122 +0,0 @@
-package install_steps_auto_install; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA $graphical @graphical_steps);
-
-@ISA = qw(install_steps);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use install_steps;
-
-sub new {
-    my ($type, $o) = @_;
-
-    # Handle legacy options
-    $o->{interactive} ||= 'gtk' if $graphical || !is_empty_array_ref($o->{interactiveSteps});
-    push @{$o->{interactiveSteps}}, qw(installPackages exitInstall configureNetwork), @graphical_steps;
-
-    if ($o->{interactive}) {
-        my $interactiveClass = "install_steps_$o->{interactive}";
-	require "$interactiveClass.pm";
-
-	@ISA = ($interactiveClass, @ISA);
-
-	foreach my $f (@{$o->{orderedSteps}}) {
-	    my $auto_name = member($f, @{$o->{interactiveSteps}}) ? 'noauto' : 'auto';
-	    $o->{steps}{$f}{$auto_name} = 1;
-	}
-
-	goto &{$::{$interactiveClass . "::"}{new}};
-    } else {
-	@ISA = ('install_steps_auto_install_non_interactive', @ISA);
-	(bless {}, ref($type) || $type)->install_steps::new($o);
-    }
-}
-
-sub configureNetwork {
-    my ($o) = @_;
-    log::l("install_steps_auto_install::configureNetwork");
-    modules::load_category($o->{modules_conf}, 'network/main|gigabit|usb');
-    goto &install_steps::configureNetwork;
-}
-
-sub exitInstall {
-    my ($o, $alldone) = @_;
-    return if $o->{autoExitInstall};
-
-    if ($o->{interactive}) {
-	$o->SUPER::exitInstall($alldone);
-    } else {
-	install_steps::exitInstall($o);
-	print "\a";
-	print "Auto installation complete (the postInstall is not done yet though)\n";
-	print "Press <Enter> to reboot\n";
-	<STDIN>;
-    }
-}
-
-
-#-######################################################################################
-#- install_steps_auto_install_non_interactive package
-#-######################################################################################
-package install_steps_auto_install_non_interactive;
-
-use install_steps;
-use lang;
-use modules;
-use common;
-use log;
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    my ($s, $t) = (N_("Entering step `%s'\n"), $o->{steps}{$step}{text});
-    ($s, $t) = (translate($s), translate($t)) if $ENV{LANG} !~ /ja|ko|zh/;
-    print sprintf($s, $t);
-    $o->install_steps::enteringStep($step);
-}
-
-sub rebootNeeded {
-    my ($o) = @_;
-    errorInStep($o, <<EOF);
-While partitioning, the partition table re-read failed, needing a reboot
-This is plain wrong for an auto_install
-EOF
-}
-
-sub ask_warn {
-    log::l(ref($_[1]) ? join " ", @{$_[1]} : $_[1]);
-}
-
-sub wait_message {
-    my ($_o, $_title, $_message) = @_;
-}
-
-sub charsetChanged {
-    my ($o) = @_;
-    lang::load_console_font($o->{locale});
-}
-
-sub errorInStep {
-    my ($_o, $err) = @_;
-    print "error :(\n"; 
-    print "$err\n\n";
-    print "switch to console f2 for a shell\n";
-    print "Press <Enter> to reboot\n";
-    <STDIN>;
-    c::_exit(0);
-}
-
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub installPackages {
-    my ($o, $packages) = @_;
-    catch_cdie { $o->install_steps::installPackages($packages) } sub { print formatError($@), "\n"; 1 };
-}
-
-1;
diff --git a/perl-install/install_steps_gtk.pm b/perl-install/install_steps_gtk.pm
deleted file mode 100644
index 762581b38..000000000
--- a/perl-install/install_steps_gtk.pm
+++ /dev/null
@@ -1,711 +0,0 @@
-package install_steps_gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive::gtk);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use pkgs;
-use install_steps_interactive;
-use interactive::gtk;
-use xf86misc::main;
-use common;
-use mygtk2;
-use ugtk2 qw(:helpers :wrappers :create);
-use devices;
-use modules;
-use install_gtk;
-use install_any;
-use mouse;
-use help;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub new($$) {
-    my ($type, $o) = @_;
-
-    $ENV{DISPLAY} ||= $o->{display} || ":0";
-    my $wanted_DISPLAY = $::testing && -x '/usr/X11R6/bin/Xnest' ? ':9' : $ENV{DISPLAY};
-
-    if ($ENV{DISPLAY} =~ /^:\d/ && !$::testing || $ENV{DISPLAY} ne $wanted_DISPLAY) { #- is the display local or distant?
-	my $f = "/tmp/Xconf";
-	if (!$::testing) {
-	    devices::make("/dev/kbd");
-	}
-	my $launchX = sub {
-	    my ($server, $Driver) = @_;
-
-	    mkdir '/var/log' if !-d '/var/log';
-
-	    my @options = $wanted_DISPLAY;
-	    if ($server eq 'Xnest') {
-		push @options, '-ac', '-geometry', $o->{vga} || ($o->{vga16} ? '640x480' : '800x600');
-	    } elsif ($::globetrotter || !$::move) {
-		install_gtk::createXconf($f, @{$o->{mouse}}{"XMOUSETYPE", "device"}, $o->{mouse}{wacom}[0], $Driver);
-
-		push @options, if_(!$::globetrotter, '-kb'), '-allowMouseOpenFail', '-xf86config', $f if arch() !~ /^sparc/;
-		push @options, 'tty7', '-dpms', '-s', '240';
-
-		#- old weird servers: Xsun
-		push @options, '-fp', '/usr/X11R6/lib/X11/fonts:unscaled' if $server =~ /Xsun/;
-	    }
-
-	    if (!fork()) {
-		c::setsid();
-		exec $server, @options or c::_exit(1);
-	    }
-
-	    #- wait for the server to start
-	    foreach (1..5) {
-		sleep 1;
-		last if fuzzy_pidofs(qr/\b$server\b/);
-		log::l("$server still not running, trying again");
-	    }
-	    my $nb;
-	    foreach (1..60) {
-		log::l("waiting for the server to start ($_ $nb)");
-		log::l("Server died"), return 0 if !fuzzy_pidofs(qr/\b$server\b/);
-		$nb++ if xf86misc::main::Xtest($wanted_DISPLAY);
-		if ($nb > 2) { #- one succeeded test is not enough :-(
-		    log::l("AFAIK X server is up");
-		    return 1;
-		}
-		sleep 1;
-	    }
-	    log::l("Timeout!!");
-	    0;
-	};
-	my @servers = qw(Driver:fbdev); #-)
-	if ($::testing) {
-	    @servers = 'Xnest';
-	} elsif (arch() eq "alpha") {
-	    require Xconfig::card;
-	    my ($card) = Xconfig::card::probe();
-	    Xconfig::card::add_to_card__using_Cards($card, $card->{type}) if $card && $card->{type};
-	    @servers = $card->{server} || "TGA";
-	    #-@servers = qw(SVGA 3DLabs TGA) 
-	} elsif (arch() =~ /^sparc/) {
-	    local $_ = cat_("/proc/fb");
-	    if (/Mach64/) {
-		@servers = qw(Mach64);
-	    } elsif (/Permedia2/) {
-		@servers = qw(3DLabs);
-	    } else {
-		@servers = qw(Xsun24);
-	    }
-	} elsif (arch() =~ /ia64/) {
-	    require Xconfig::card;
-	    my ($card) = Xconfig::card::probe();
-	    @servers = map { if_($_, "Driver:$_") } $card && $card->{Driver}, 'fbdev';
-        }
-
-        if (($::move || $::globetrotter) && !$::testing) {
-            require move;
-            require run_program;
-            move::automatic_xconf($o);
-            run_program::run('/sbin/service', 'xfs', 'start');
-            @servers = $::globetrotter ? qw(Driver:fbdev) : qw(X_move);
-	}
-
-	foreach (@servers) {
-	    log::l("Trying with server $_");
-	    my ($prog, $Driver) = /Driver:(.*)/ ? ('Xorg', $1) : /Xsun|Xnest|^X_move$/ ? $_ : "XF86_$_";
-	    if (/FB/i) {
-		!$o->{vga16} && $o->{allowFB} or next;
-
-		$o->{allowFB} = &$launchX($prog, $Driver) #- keep in mind FB is used.
-		  and goto OK;
-	    } else {
-		$o->{vga16} = 1 if /VGA16/;
-		&$launchX($prog, $Driver) and goto OK;
-	    }
-            $::move and print("can not launch graphical mode :(\n"), c::_exit(1);
-	}
-	return undef;
-    }
-  OK:
-    $ENV{DISPLAY} = $wanted_DISPLAY;
-    run_program::run('xset', 'm', '1/8', '1') if is_xbox();
-    install_gtk::init_gtk($o);
-    install_gtk::init_sizes();
-    install_gtk::install_theme($o);
-    install_gtk::create_logo_window($o);
-    install_gtk::create_steps_window($o);
-
-    $ugtk2::grab = 1;
-
-    $o = (bless {}, ref($type) || $type)->SUPER::new($o);
-    $o->interactive::gtk::new;
-    $o;
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-
-    printf "Entering step `%s'\n", $o->{steps}{$step}{text};
-    $o->SUPER::enteringStep($step);
-    install_gtk::update_steps_position($o);
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    $o->SUPER::leavingStep($step);
-}
-
-
-sub charsetChanged {
-    my ($o) = @_;
-    Gtk2->set_locale;
-    install_gtk::load_font($o);
-    install_gtk::create_steps_window($o);
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-sub selectLanguage {
-    my ($o, $first_time) = @_;
-    $o->SUPER::selectLanguage;
-  
-    $o->ask_warn('',
-formatAlaTeX(N("Your system is low on resources. You may have some problem installing
-Mandriva Linux. If that occurs, you can try a text install instead. For this,
-press `F1' when booting on CDROM, then enter `text'."))) if $first_time && availableRamMB() < 70; # 70MB
-
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($o, $force) = @_;
-    my %old = %{$o->{mouse}};
-    $o->SUPER::selectMouse($force) or return;
-    my $mouse = $o->{mouse};
-    $mouse->{type} eq 'none' ||
-      $old{type}   eq $mouse->{type}   && 
-      $old{name}   eq $mouse->{name}   &&
-      $old{device} eq $mouse->{device} && !$force and return;
-
-    while (1) {
-	my $x_protocol_changed = mouse::change_mouse_live($mouse, \%old);
-	mouse::test_mouse_install($mouse, $x_protocol_changed) and return;
-
-	%old = %$mouse;
-	$o->SUPER::selectMouse(1);
-	$mouse = $o->{mouse};
-    } 
-}
-
-sub reallyChooseGroups {
-    my ($o, $size_to_display, $individual, $_compssUsers) = @_;
-
-    my $w = ugtk2->new('');
-    my $w_size = gtknew('Label', text => &$size_to_display);
-
-    my $entry = sub {
-	my ($e) = @_;
-
-	gtknew('CheckButton', 
-	       text => translate($e->{label}), 
-	       tip => translate($e->{descr}),
-	       active_ref => \$e->{selected},
-	       toggled => sub { 
-		   gtkset($w_size, text => &$size_to_display);
-	       });
-    };
-    #- when restarting this step, it might be necessary to reload the compssUsers.pl (bug 11558). kludgy.
-    if (!ref $o->{gtk_display_compssUsers}) { install_any::load_rate_files($o) }
-    ugtk2::gtkadd($w->{window},
-	   gtkpack_($w->create_box_with_title(N("Package Group Selection")),
-		    1, $o->{gtk_display_compssUsers}->($entry),
-		    1, '',
-		    0, gtknew('HBox', children_loose => [
-			  gtknew('Button', text => N("Help"), clicked => $o->interactive_help_sub_display_id('choosePackages')),
-			  $w_size,
-			  if_($individual,
-			      gtknew('CheckButton', text => N("Individual package selection"), active_ref => $individual),
-			  ),
-			  gtknew('Button', text => N("Next"), clicked => sub { Gtk2->main_quit }),
-			 ]),
-		  ),
-	  );
-    $w->main;
-    1;
-}
-
-sub choosePackagesTree {
-    my ($o, $packages, $o_limit_medium) = @_;
-
-    my $available = install_any::getAvailableSpace($o);
-    my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024);
-
-    my $common;
-    $common = {             get_status => sub {
-				my $size = pkgs::selectedSize($packages);
-				N("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available / sqr(1024));
-			    },
-			    node_state => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return;
-				pkgs::packageMedium($packages, $p)->{selected} or return;
-				$p->arch eq 'src'                       and return;
-				$p->flag_base                           and return 'base';
-				$p->flag_installed && !$p->flag_upgrade and return 'installed';
-				$p->flag_selected                       and return 'selected';
-				return 'unselected';
-			    },
-			    build_tree => sub {
-				my ($add_node, $flat) = @_;
-				if ($flat) {
-				    foreach (sort map { $_->name }
-					     grep { !$o_limit_medium || pkgs::packageMedium($packages, $_) == $o_limit_medium }
-					     grep { $_ && $_->arch ne 'src' }
-					     @{$packages->{depslist}}) {
-					$add_node->($_, undef);
-				    }
-				} else {
-				    foreach my $root (@{$o->{compssUsers}}) {
-					my (@firstchoice, @others);
-					my %fl = map { ("CAT_$_" => 1) } @{$root->{flags}};
-					foreach my $p (@{$packages->{depslist}}) {
-					    !$o_limit_medium || pkgs::packageMedium($packages, $p) == $o_limit_medium or next;
-					    my @flags = $p->rflags;
-					    next if !($p->rate && any { any { !/^!/ && $fl{$_} } split('\|\|') } @flags);
-					    $p->rate >= 3 ?
-					      push(@firstchoice, $p->name) :
-						push(@others,    $p->name);
-					}
-					my $root2 = translate($root->{path}) . '|' . translate($root->{label});
-					$add_node->($_, $root2)                    foreach sort @firstchoice;
-					$add_node->($_, $root2 . '|' . N("Other")) foreach sort @others;
-				    }
-				}
-			    },
-			    get_info => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return '';
-				pkgs::extractHeaders([$p], $packages->{mediums});
-
-				my $imp = translate($pkgs::compssListDesc{$p->flag_base ? 5 : $p->rate});
-
-                                my $tag = { 'foreground' => 'royalblue3' };
-				$@ ? N("Bad package") :
-				  [ [ N("Name: "), $tag ], [ $p->name . "\n" ],
-                                    [ N("Version: "), $tag ], [ $p->version . '-' . $p->release . "\n" ],
-                                    [ N("Size: "), $tag ], [ N("%d KB\n", $p->size / 1024) ],
-                                    if_($imp, [ N("Importance: "), $tag ], [ "$imp\n" ]),
-                                    [ "\n" ], [ formatLines(c::from_utf8($p->description)) ] ];
-			    },
-			    toggle_nodes => sub {
-				my $set_state = shift @_;
-				my $isSelection = 0;
-				my %l = map { my $p = pkgs::packageByName($packages, $_);
-					      $isSelection ||= !$p->flag_selected;
-					      $p->id => 1 } @_;
-				my $state = $packages->{state} ||= {};
-				my @l = $isSelection ? $packages->resolve_requested($packages->{rpmdb}, $state, \%l,
-										    callback_choices => \&pkgs::packageCallbackChoices) :
-						       $packages->disable_selected($packages->{rpmdb}, $state,
-										   map { $packages->{depslist}[$_] } keys %l);
-				my $size = pkgs::selectedSize($packages);
-				my $error;
-
-				if (!@l) {
-				    #- no package can be selected or unselected.
-				    my @ask_unselect = grep { $state->{rejected}{$_}{backtrack} &&
-								exists $l{$packages->search($_, strict_fullname => 1)->id} }
-				      keys %{$state->{rejected} || {}};
-				    #- extend to closure (to given more detailed and not absurd reason).
-				    my %ask_unselect;
-				    while (@ask_unselect > keys %ask_unselect) {
-					@ask_unselect{@ask_unselect} = ();
-					foreach (keys %ask_unselect) {
-					    foreach (keys %{$state->{rejected}{$_}{backtrack}{closure} || {}}) {
-						next if exists $ask_unselect{$_};
-						push @ask_unselect, $_;
-					    }
-					}
-				    }
-				    $error = [ N("You can not select/unselect this package"),
-					       formatList(20, map { my $rb = $state->{rejected}{$_}{backtrack};
-									    my @froms = keys %{$rb->{closure} || {}};
-									    my @unsatisfied = @{$rb->{unsatisfied} || []};
-									    my $s = join ", ", ((map { N("due to missing %s", $_) } @froms),
-												(map { N("due to unsatisfied %s", $_) } @unsatisfied),
-												$rb->{promote} && !$rb->{keep} ? N("trying to promote %s", join(", ", @{$rb->{promote}})) : @{[]},
-												$rb->{keep} ? N("in order to keep %s", join(", ", @{$rb->{keep}})) : @{[]},
-											       );
-									    $_ . ($s ? " ($s)" : '');
-									} sort @ask_unselect) ];
-				} elsif (pkgs::correctSize($size / sqr(1024)) > $available / sqr(1024)) {
-				    $error = N("You can not select this package as there is not enough space left to install it");
-				} elsif (@l > @_ && $common->{state}{auto_deps}) {
-				    $o->ask_okcancel('', [ $isSelection ? 
-							   N("The following packages are going to be installed") :
-							   N("The following packages are going to be removed"),
-							       formatList(20, sort(map { $_->name } @l)) ], 1) or $error = ''; #- defined
-				}
-				if (defined $error) {
-				    $o->ask_warn('', $error) if $error;
-				    #- disable selection (or unselection).
-				    $isSelection ? $packages->disable_selected($packages->{rpmdb}, $state, @l) :
-				                   $packages->resolve_requested($packages->{rpmdb}, $state, { map { $_->id => 1 } @l });
-				} else {
-				    #- keep the changes, update visible state.
-				    foreach (@l) {
-					$set_state->($_->name, $_->flag_selected ? 'selected' : 'unselected');
-				    }
-				}
-			    },
-			    grep_allowed_to_toggle => sub {
-				grep { my $p = pkgs::packageByName($packages, $_); $p && !$p->flag_base } @_;
-			    },
-			    grep_unselected => sub {
-				grep { !pkgs::packageByName($packages, $_)->flag_selected } @_;
-			    },
-			    check_interactive_to_toggle => sub {
-				my $p = pkgs::packageByName($packages, $_[0]) or return;
-				if ($p->flag_base) {
-				    $o->ask_warn('', N("This is a mandatory package, it can not be unselected"));
-				} elsif ($p->flag_installed && !$p->flag_upgrade) {
-				    $o->ask_warn('', N("You can not unselect this package. It is already installed"));
-				} elsif ($p->flag_selected && $p->flag_installed) {
-				    if ($::expert) {
-					$o->ask_yesorno('', N("This package must be upgraded.\nAre you sure you want to deselect it?")) or return;
-					return 1;
-				    } else {
-					$o->ask_warn('', N("You can not unselect this package. It must be upgraded"));
-				    }
-				} else { return 1 }
-				return;
-			    },
-			    auto_deps => N("Show automatically selected packages"),
-			    interactive_help_id => 'choosePackagesTree',
-			    ok => N("Install"),
-			    cancel => N("Previous"),
-			    icons => [ { icon         => 'floppy',
-					 help         => N("Load/Save selection"),
-					 wait_message => N("Updating package selection"),
-					 code         => sub { $o->loadSavePackagesOnFloppy($packages); 1 },
-				       }, 
-				       if_(0, 
-				       { icon         => 'feather',
-					 help         => N("Minimal install"),
-					 code         => sub {
-					     
-					     install_any::unselectMostPackages($o);
-					     pkgs::setSelectedFromCompssList($packages, { SYSTEM => 1 }, 4, $availableCorrected);
-					     1;
-					 } }),
-				     ],
-			    state => {
-				      auto_deps => 1,
-				      flat      => $o_limit_medium,
-				     },
-			  };
-
-    $o->ask_browse_tree_info('', N("Choose the packages you want to install"), $common);
-}
-
-#------------------------------------------------------------------------------
-sub beforeInstallPackages {
-    my ($o) = @_;    
-    $o->SUPER::beforeInstallPackages;
-    install_any::copy_advertising($o);
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($o, $packages) = @_;
-
-    my ($current_total_size, $last_size, $nb, $total_size, $start_time, $last_dtime, $_trans_progress_total);
-
-    my $w = ugtk2->new(N("Installing"));
-    $w->sync;
-    my $text = gtknew('Label');
-    my ($advertising, $change_time, $i);
-    my $show_advertising if 0;
-    $show_advertising = to_bool(@install_any::advertising_images) if !defined $show_advertising;
-
-    my ($msg, $msg_time_remaining) = map { gtknew('Label', text => $_) } '', N("Estimating");
-    my ($progress, $progress_total) = map { Gtk2::ProgressBar->new } (1..2);
-    ugtk2::gtkadd($w->{window}, my $box = gtknew('VBox', spacing => 10));
-
-    my $advertize = sub {
-	my ($update) = @_;
-	@install_any::advertising_images or return;
-	foreach ($msg, $progress, $text) {
-	    $show_advertising ? $_->hide : $_->show;
-	}
-
-	gtkdestroy($advertising) if $advertising;
-	if ($show_advertising && $update) {
-	    $change_time = time();
-	    my $f = $install_any::advertising_images[$i++ % @install_any::advertising_images];
-	    log::l("advertising $f");
-	    my $pl = $f; $pl =~ s/\.png$/.pl/;
-	    my $icon_name = $f; $icon_name =~ s/\.png$/_icon.png/;
-	    my ($draw_text, $width, $height, $border, $y_start, @text);
-	    -e $pl and $draw_text = 1;
-	    eval(cat_($pl)) if $draw_text;
-	    my $pix = gtkcreate_pixbuf($f);
-	    my $darea = gtknew('DrawingArea');
-	    gtkpack($box, $advertising = !$draw_text ?
-		    gtkcreate_img($f) :
-		    gtkset($darea, width => $width, height => $height, expose_event => sub {
-			       my (undef, undef, $dx, $dy) = $darea->allocation->values;
-				   $darea->window->draw_rectangle($darea->style->bg_gc('active'), 1, 0, 0, $dx, $dy);
-				   $pix->render_to_drawable($darea->window, $darea->style->bg_gc('normal'), 0, 0,
-							    ($dx-$width)/2, 0, $width, $height, 'none', 0, 0);
-
-                                   my @lines = wrap_paragraph([ @text ], $darea, $border, $width);
-                                   foreach my $line (@lines) {
-                                       my $layout = $darea->create_pango_layout($line->{text});
-                                       my $draw_lay = sub {
-                                           my ($gc, $decx) = @_;
-                                           $darea->window->draw_layout($gc, $line->{'x'} + $decx, $y_start + $line->{'y'}, $layout);
-                                       };
-                                       $draw_lay->($darea->style->black_gc, 0);
-                                       $line->{options}{bold} and $draw_lay->($darea->style->black_gc, 1);
-                                   }
-			   }));
-	} else {
-	    $advertising = undef;
-	}
-    };
-
-    my $cancel = gtknew('Button', text => N("Cancel"), clicked => sub { $pkgs::cancel_install = 1 });
-    my $details = gtknew('Button', text_ref => \$show_advertising, 
-			 format => sub { $show_advertising ? N("Details") : N("No details") },
-			 clicked => sub {
-			     gtkval_modify(\$show_advertising, !$show_advertising);
-			     $advertize->('update');
-			 });
-
-    $box->pack_end(gtkshow(gtknew('VBox', spacing => 5, children_loose => [
-			   $msg, $progress,
-			   gtknew('Table', children => [ [ N("Time remaining "), $msg_time_remaining ] ]),
-			   $text,
-			   $progress_total,
-			   gtknew('HButtonBox', children_loose => [ $cancel, $details ]),
-			  ])), 0, 1, 0);
-    $details->hide if !@install_any::advertising_images;
-    $w->sync;
-    gtkset($msg, text => N("Please wait, preparing installation..."));
-    foreach ($cancel, $details) {
-	gtkset_mousecursor_normal($_->window);
-    }
-
-    $advertize->(0);
-
-    my $oldInstallCallback = \&pkgs::installCallback;
-    local *pkgs::installCallback = sub {
-	my ($data, $type, $id, $subtype, $amount, $total) = @_;
-	if ($type eq 'user' && $subtype eq 'install') {
-	    #- $amount and $total are used to return number of package and total size.
-	    $nb = $amount;
-	    $total_size = $total; $current_total_size = 0;
-	    $start_time = time();
-	    gtkset($msg, text => N("%d packages", $nb));
-	    $w->flush;
-	} elsif ($type eq 'inst' && $subtype eq 'start') {
-	    $progress->set_fraction(0);
-	    my $p = $data->{depslist}[$id];
-	    gtkset($msg, text => N("Installing package %s", $p->name));
-	    $current_total_size += $last_size;
-	    $last_size = $p->size;
-	    gtkset($text, text => (split /\n/, c::from_utf8($p->summary))[0] || '');
-	    $advertize->(1) if $show_advertising && $total_size > 20_000_000 && time() - $change_time > 20;
-	    $w->flush;
-	} elsif ($type eq 'inst' && $subtype eq 'progress') {
-	    $progress->set_fraction($total ? $amount / $total : 0);
-
-	    my $dtime = time() - $start_time;
-	    my $ratio = 
-	      $total_size == 0 ? 0 :
-		pkgs::size2time($current_total_size + $amount, $total_size) / pkgs::size2time($total_size, $total_size);
-	    $ratio >= 1 and $ratio = 1;
-	    my $total_time = $ratio ? $dtime / $ratio : time();
-
-	    $progress_total->set_fraction($ratio);
-	    if ($dtime != $last_dtime && $current_total_size > 80_000_000) {
-		gtkset($msg_time_remaining, text => formatTime(10 * round(max($total_time - $dtime, 0) / 10) + 10));
-		$last_dtime = $dtime;
-	    }
-	    $w->flush;
-	} else { goto $oldInstallCallback }
-    };
-    #- the modification is not local as the box should be living for other package installation.
-    undef *install_any::changeMedium;
-    *install_any::changeMedium = sub {
-	my ($method, $medium) = @_;
-
-	#- if not using a cdrom medium or an iso image, always abort.
-	return if !install_any::method_allows_medium_change($method);
-
-	my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	local $| = 1; print "\a";
-	my $time = time();
-	my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX(install_messages::com_license()), [ N_("Accept"), N_("Refuse") ], "Accept") eq "Accept");
-	if ($method =~ /-iso$/) {
-	    $r = install_any::changeIso($name);
-	} else {
-	    $r &&= $o->ask_okcancel('', N("Change your Cd-Rom!
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you do not have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
-	}
-	#- add the elapsed time (otherwise the predicted time will be rubbish)
-	$start_time += time() - $time;
-	return $r;
-    };
-    my $install_result;
-    catch_cdie { $install_result = $o->install_steps::installPackages($packages) }
-      sub {
-	  log::l("catch_cdie: $@");
-          my $time = time();
-	  if ($@ =~ /^error ordering package list: (.*)/) {
-	      $o->ask_yesorno('', [
-N("There was an error ordering packages:"), $1, N("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  } elsif ($@ =~ /^error installing package list: (.*)/) {
-	      $o->ask_yesorno('', [
-N("There was an error installing packages:"), $1, N("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  }
-	  $w->destroy;
-          #- add the elapsed time (otherwise the predicted time will be rubbish)
-          $start_time += time() - $time;
-	  0;
-      };
-    if ($pkgs::cancel_install) {
-	$pkgs::cancel_install = 0;
-	die 'already displayed';
-    }
-    $w->destroy;
-    $install_result;
-}
-
-sub summary_prompt {
-    my ($o, $l, $check_complete) = @_;
-
-    my $w = ugtk2->new('');
-
-    my $set_entry_labels;
-    my @table;
-    my $group;
-    foreach my $e (@$l) {
-	if ($group ne $e->{group}) {
-	    $group = $e->{group};
-	    push @table, [ gtknew('HBox', children_tight => [ $group ]), '' ];
-	}
-	$e->{widget} = gtknew('WrappedLabel', width => $::real_windowwidth * 0.72);
-
-	push @table, [], [ gtknew('HBox', spacing => 30, children_tight => [ '', $e->{widget} ]),
-			   gtknew('Button', text => N("Configure"), clicked => sub { 
-						 $w->{rwindow}->hide;
-						 $e->{clicked}(); 
-						 $w->{rwindow}->show;
-						 $set_entry_labels->();
-					     }) ];
-    }
-
-    $set_entry_labels = sub {
-	foreach (@$l) {
-	    my $t = $_->{val}() || '<span foreground="red">' . N("not configured") . '</span>';
-	    $t =~ s/&/&amp;/g;
-	    gtkset($_->{widget}, text_markup => $_->{label} . ' - ' . $t);
-	}
-    };
-    $set_entry_labels->();
-
-    my $help_sub = $o->interactive_help_sub_display_id('summary');
-
-    ugtk2::gtkadd($w->{window},
-	   gtknew('VBox', spacing => 5, children => [
-		    1, gtknew('ScrolledWindow', child => gtknew('Table', mcc => 1, children => \@table)),
-		    0, $w->create_okcancel(undef, '', '', if_($help_sub, [ N("Help"), $help_sub, 1 ]))
-		  ]));
-
-    $w->main($check_complete);
-}
-
-sub deselectFoundMedia {
-    #- group by CD
-    my ($o, $hdlists, $mediumsize) = @_;
-    my %cdlist;
-    my @hdlist2;
-    my @corresp;
-    my $i = 0;
-    my $totalsize = 0;
-    foreach (@$hdlists) {
-	my $cd = install_any::getCDNumber($_->[3]);
-	if (!$cd || !@{$cdlist{$cd} || []}) {
-	    push @hdlist2, $_;
-	    $corresp[$i] = [ $i ];
-	} else {
-	    $corresp[$i] = [];
-	    push @{$corresp[$cdlist{$cd}[0]]}, $i;
-	}
-	if ($cd) {
-	    $cdlist{$cd} ||= [];
-	    push @{$cdlist{$cd}}, $i;
-	}
-	$totalsize >= 0 and $totalsize += $mediumsize->{$_->[0]};
-	++$i;
-    }
-    $totalsize ||= -1; #- don't check size, total medium size unknown
-    my @selection = (1) x @hdlist2;
-    my $copy_rpms_on_disk = 0;
-    my $ask_copy_rpms_on_disk = $o->{method} !~ /iso/i;
-    #- check available size for copying rpms from infos in hdlists file
-    if ($ask_copy_rpms_on_disk && $totalsize >= 0) {
-	my $availvar = install_any::getAvailableSpace_mounted("$::prefix/var");
-	$availvar /= 1024 * 1024; #- Mo
-	log::l("totalsize=$totalsize, avail on $::prefix/var=$availvar");
-	$ask_copy_rpms_on_disk = $totalsize < $availvar * 0.6;
-    }
-    if ($ask_copy_rpms_on_disk) {
-	#- don't be afraid, cleanup old RPMs if upgrade
-	eval { rm_rf("$::prefix/var/ftp/pub/Mandrivalinux", "$::prefix/var/ftp/pub/Mandrivalinux") if $o->{isUpgrade} };
-	my $w = ugtk2->new("");
-	$i = -1;
-	$w->sync;
-	ugtk2::gtkadd(
-	    $w->{window},
-	    gtkpack(
-		Gtk2::VBox->new(0, 5),
-		Gtk2::WrappedLabel->new(N("The following installation media have been found.
-If you want to skip some of them, you can unselect them now.")),
-		(map {
-			++$i;
-			my $b = gtknew('CheckButton', text => $_->[3], active_ref => \$selection[$i]);
-			$b->set_sensitive(0) unless $i;
-			$b;
-		    } @hdlist2),
-		gtknew('HSeparator'),
-		Gtk2::WrappedLabel->new(N("You have the option to copy the contents of the CDs onto the hard drive before installation.
-It will then continue from the hard drive and the packages will remain available once the system is fully installed.")),
-		gtknew('CheckButton', text => N("Copy whole CDs"), active_ref => \$copy_rpms_on_disk),
-		gtknew('HSeparator'),
-		gtknew('HBox', children_tight => [
-		    gtknew('Button', text => N("Next"), clicked => sub { Gtk2->main_quit }),
-		]),
-	    ),
-	);
-	$w->main;
-    }
-    $i = -1;
-    my $l = [ grep { $selection[++$i] } @hdlist2 ];
-    my @l2; $i = 0;
-    foreach my $c (@$l) {
-	++$i while $hdlists->[$i][3] ne $c->[3];
-	push @l2, $hdlists->[$_] foreach @{$corresp[$i]};
-    }
-    log::l("keeping media " . join ',', map { $_->[1] } @l2);
-    $o->{mediumsize} = $totalsize;
-    (\@l2, $copy_rpms_on_disk);
-}
-
-1;
diff --git a/perl-install/install_steps_interactive.pm b/perl-install/install_steps_interactive.pm
deleted file mode 100644
index f2a420239..000000000
--- a/perl-install/install_steps_interactive.pm
+++ /dev/null
@@ -1,1344 +0,0 @@
-package install_steps_interactive; # $Id$
-
-
-use strict;
-use vars qw(@ISA $new_bootstrap);
-
-@ISA = qw(install_steps);
-
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table;
-use fs::type;
-use install_steps;
-use install_interactive;
-use install_any;
-use install_messages;
-use detect_devices;
-use run_program;
-use devices;
-use fsedit;
-use loopback;
-use mouse;
-use modules;
-use modules::interactive;
-use lang;
-use keyboard;
-use any;
-use log;
-
-#-######################################################################################
-#- In/Out Steps Functions
-#-######################################################################################
-sub errorInStep {
-    my ($o, $err) = @_;
-    $o->ask_warn(N("Error"), [ N("An error occurred"), formatError($err) ]);
-}
-
-sub kill_action {
-    my ($o) = @_;
-    $o->kill;
-}
-
-#-######################################################################################
-#- Steps Functions
-#-######################################################################################
-#------------------------------------------------------------------------------
-sub selectLanguage {
-    my ($o) = @_;
-
-    $o->{locale}{lang} = any::selectLanguage($o, $o->{locale}{lang}, $o->{locale}{langs} ||= {});
-    install_steps::selectLanguage($o);
-
-    if ($o->isa('interactive::gtk')) {
-	$o->ask_warn('', formatAlaTeX(
-"If you see this message it is because you chose a language for
-which DrakX does not include a translation yet; however the fact
-that it is listed means there is some support for it anyway.
-
-That is, once GNU/Linux will be installed, you will be able to at
-least read and write in that language; and possibly more (various
-fonts, spell checkers, various programs translated etc. that
-varies from language to language).")) if $o->{locale}{lang} !~ /^en/ && !lang::load_mo();
-    } else {
-	#- no need to have this in po since it is never translated
-	$o->ask_warn('', "The characters of your language can not be displayed in console,
-so the messages will be displayed in english during installation") if $ENV{LANGUAGE} eq 'C';
-    }
-}
-    
-sub acceptLicense {
-    my ($o) = @_;
-
-    $o->{release_notes} = join("\n\n", map { 
-	my $f = install_any::getFile($_);
-	$f && cat__($f);
-    } 'release-notes.txt', 'release-notes.' . arch() . '.txt');
-
-    return if $o->{useless_thing_accepted};
-
-    my $r = $::testing ? 'Accept' : 'Refuse';
-
-    $o->ask_from_({ title => N("License agreement"), 
-		     cancel => N("Quit"),
-		     messages => formatAlaTeX(install_messages::main_license() . "\n\n\n" . install_messages::warning_about_patents()),
-		     interactive_help_id => 'acceptLicense',
-		     more_buttons => [ [ N("Release Notes"), sub { $o->ask_warn(N("Release Notes"), $o->{release_notes}) }, 1 ] ],
-		     callbacks => { ok_disabled => sub { $r eq 'Refuse' } },
-		   },
-		   [ { list => [ N_("Accept"), N_("Refuse") ], val => \$r, type => 'list', format => sub { translate($_[0]) } } ])
-      or do {
-	  if ($::globetrotter) {
-	      system("killall XFree86");
-	      exec("/sbin/reboot");
-	  }
-	  install_any::ejectCdrom();
-	  $o->exit;
-      };
-}
-
-#------------------------------------------------------------------------------
-sub selectKeyboard {
-    my ($o, $clicked) = @_;
-
-    my $from_usb = keyboard::from_usb();
-    my $l = keyboard::lang2keyboards(lang::langs($o->{locale}{langs}));
-
-    if ($::expert || $clicked || !($from_usb || @$l && $l->[0][1] >= 90) || listlength(lang::langs($o->{locale}{langs})) > 1) {
-	add2hash($o->{keyboard}, $from_usb);
-	my @best = uniq($from_usb ? $from_usb->{KEYBOARD} : (), (map { $_->[0] } @$l), 'us_intl');
-
-	my $format = sub { translate(keyboard::KEYBOARD2text($_[0])) };
-	my $other;
-	my $ext_keyboard = my $KEYBOARD = $o->{keyboard}{KEYBOARD};
-	$o->ask_from_(
-		      { title => N("Keyboard"), 
-			messages => N("Please choose your keyboard layout."),
-			interactive_help_id => 'selectKeyboard',
-			advanced_messages => N("Here is the full list of available keyboards"),
-			advanced_label => N("More"),
-			callbacks => { changed => sub { $other = $_[0] == 1 } },
-		      },
-		      [ if_(@best > 1, { val => \$KEYBOARD, type => 'list', format => $format, sort => 1,
-					 list => [ @best ] }),
-			{ val => \$ext_keyboard, type => 'list', format => $format,
-			  list => [ difference2([ keyboard::KEYBOARDs() ], \@best) ], advanced => @best > 1 }
-		      ]);
-	$o->{keyboard}{KEYBOARD} = @best <= 1 || $other ? $ext_keyboard : $KEYBOARD;
-	delete $o->{keyboard}{unsafe};
-    }
-    keyboard::group_toggle_choose($o, $o->{keyboard}) or goto &selectKeyboard;
-    install_steps::selectKeyboard($o);
-}
-
-#------------------------------------------------------------------------------
-sub selectInstallClass {
-    my ($o) = @_;
-
-    if (my @l = install_any::find_root_parts($o->{fstab}, $o->{prefix})) {
-	log::l("proposing to upgrade partitions " . join(" ", map { $_->{part}{device} } @l));
-
-	my @releases = uniq(map { $_->{release} } @l);
-	if (@releases != @l) {
-	    #- same release name so adding the device to differentiate them:
-	    $_->{release} .= " ($_->{part}{device})" foreach @l;
-	}
-
-	my $p;
-	$o->ask_from_({ title => N("Install/Upgrade"),
-			messages => N("Is this an install or an upgrade?"),
-			interactive_help_id => 'selectInstallClass',
-		      },
-		      [ { val => \$p,
-			  list => [ @l, N_("Install") ], 
-			  type => 'list',
-			  format => sub { ref($_[0]) ? N("Upgrade %s", $_[0]{release}) : translate($_[0]) }
-			} ]);
-	if (ref $p) {
-	    my $part = $p->{part};
-	    log::l("choosing to upgrade partition $part->{device}");
-	    $o->{migrate_device_names} = install_any::use_root_part($o->{all_hds}, $part, $o);
-	    foreach (grep { $_->{mntpoint} } @{$o->{fstab}}) {
-		my ($options, $_unknown) = fs::mount_options::unpack($_);
-		$options->{encrypted} or next;
-		$o->ask_from_({ focus_first => 1 },
-			      [ { label => N("Encryption key for %s", $_->{mntpoint}),
-				  hidden => 1, val => \$_->{encrypt_key} } ]);
-	    }
-	    $o->{isUpgrade} = $p->{release_file} =~ /redhat/ ? 'redhat' : 'mandrake';
-	}
-    }
-}
-
-#------------------------------------------------------------------------------
-sub selectMouse {
-    my ($o, $force) = @_;
-
-    $force ||= $o->{mouse}{unsafe};
-
-    if ($force) {
-	my $prev = $o->{mouse}{type} . '|' . $o->{mouse}{name};
-
-	$o->ask_from_({ messages => N("Please choose your type of mouse."),
-			interactive_help_id => 'selectMouse',
-		      },
-		     [ { list => [ mouse::fullnames() ], separator => '|', val => \$prev, format => sub { join('|', map { translate($_) } split('\|', $_[0])) } } ]);
-	$o->{mouse} = mouse::fullname2mouse($prev);
-    }
-
-    if ($force && $o->{mouse}{type} eq 'serial') {
-	$o->{mouse}{device} = 
-	  $o->ask_from_listf_raw({ title => N("Mouse Port"),
-				   messages => N("Please choose which serial port your mouse is connected to."),
-				   interactive_help_id => 'selectSerialPort',
-				 },
-			    \&mouse::serial_port2text,
-			    [ mouse::serial_ports() ]) or return &selectMouse;
-    }
-    if (arch() =~ /ppc/ && $o->{mouse}{nbuttons} == 1) {
-	#- set a sane default F11/F12
-	$o->{mouse}{button2_key} = 87;
-	$o->{mouse}{button3_key} = 88;
-	$o->ask_from('', N("Buttons emulation"),
-		[
-		{ label => N("Button 2 Emulation"), val => \$o->{mouse}{button2_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
-		{ label => N("Button 3 Emulation"), val => \$o->{mouse}{button3_key}, list => [ mouse::ppc_one_button_keys() ], format => \&mouse::ppc_one_button_key2text },
-		]) or return;
-    }
-    
-    if ($o->{mouse}{device} eq "usbmouse") {
-	modules::interactive::load_category($o, $o->{modules_conf}, 'bus/usb', 1, 1);
-	eval { 
-	    devices::make("usbmouse");
-	    modules::load(qw(hid mousedev usbmouse));
-	};
-    }
-
-    $o->SUPER::selectMouse;
-    1;
-}
-#------------------------------------------------------------------------------
-sub setupSCSI {
-    my ($o) = @_;
-
-    if (!$::noauto && arch() =~ /i.86/) {
-	if ($o->{pcmcia} ||= detect_devices::real_pcmcia_probe()) {
-	    my $w = $o->wait_message(N("PCMCIA"), N("Configuring PCMCIA cards..."));
-	    my $results = install_any::configure_pcmcia($o->{modules_conf}, $o->{pcmcia});
-	    undef $w;
-	    $results and $o->ask_warn('', $results);
-	}
-    }
-    { 
-	my $_w = $o->wait_message(N("IDE"), N("Configuring IDE"));
-	modules::load(modules::category2modules('disk/cdrom'));
-    }
-    modules::interactive::load_category($o, $o->{modules_conf}, 'bus/firewire', 1);
-
-    my $have_non_scsi = detect_devices::hds(); #- at_least_one scsi device if we have no disks
-    modules::interactive::load_category($o, $o->{modules_conf}, 'disk/ide|scsi|hardware_raid|sata|firewire', 1, !$have_non_scsi);
-    modules::interactive::load_category($o, $o->{modules_conf}, 'disk/ide|scsi|hardware_raid|sata|firewire') if !detect_devices::hds(); #- we really want a disk!
-
-    install_interactive::tellAboutProprietaryModules($o);
-
-    install_any::getHds($o, $o);
-}
-
-sub ask_mntpoint_s { #- }{}
-    my ($o, $fstab) = @_;
-
-    my @fstab = grep { isTrueFS($_) } @$fstab;
-    @fstab = grep { isSwap($_) } @$fstab if @fstab == 0;
-    @fstab = @$fstab if @fstab == 0;
-    die N("No partition available") if @fstab == 0;
-
-    {
-	my $_w = $o->wait_message('', N("Scanning partitions to find mount points"));
-	install_any::suggest_mount_points($fstab, $o->{prefix}, 'uniq');
-	log::l("default mntpoint $_->{mntpoint} $_->{device}") foreach @fstab;
-    }
-    if (@fstab == 1) {
-	$fstab[0]{mntpoint} = '/';
-    } else {
-	$o->ask_from_({ messages => N("Choose the mount points"),
-			interactive_help_id => 'ask_mntpoint_s',
-			callbacks => {
-			    complete => sub {
-				require diskdrake::interactive;
-				eval { 1, find_index {
-				    !diskdrake::interactive::check_mntpoint($o, $_->{mntpoint}, $_, $o->{all_hds});
-				} @fstab };
-			    },
-			},
-		      },
-		      [ map { 
-			  { 
-			      label => partition_table::description($_), 
-			      val => \$_->{mntpoint},
-			      not_edit => 0,
-			      list => [ '', fsedit::suggestions_mntpoint(fs::get::empty_all_hds()) ],
-			  };
-		        } @fstab ]) or return;
-    }
-    $o->SUPER::ask_mntpoint_s($fstab);
-}
-
-#------------------------------------------------------------------------------
-sub doPartitionDisks {
-    my ($o) = @_;
-
-    if (arch() =~ /ppc/) {
-	my $generation = detect_devices::get_mac_generation();
-	if ($generation =~ /NewWorld/) {
-	    #- mac partition table
-	    if (defined $partition_table::mac::bootstrap_part) {
-    		#- do not do anything if we've got the bootstrap setup
-    		#- otherwise, go ahead and create one somewhere in the drive free space
-	    } else {
-		my $freepart = $partition_table::mac::freepart;
-		if ($freepart && $freepart->{size} >= 1) {
-		    log::l("creating bootstrap partition on drive /dev/$freepart->{hd}{device}, block $freepart->{start}");
-		    $partition_table::mac::bootstrap_part = $freepart->{part};
-		    log::l("bootstrap now at $partition_table::mac::bootstrap_part");
-		    my $p = { start => $freepart->{start}, size => 1 << 11, mntpoint => '' };
-		    fs::type::set_pt_type($p, 0x401);
-		    fsedit::add($freepart->{hd}, $p, $o->{all_hds}, { force => 1, primaryOrExtended => 'Primary' });
-		    $new_bootstrap = 1;
-
-    		} else {
-		    $o->ask_warn('', N("No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"));
-    		}
-	    }
-	} elsif ($generation =~ /IBM/) {
-	    #- dos partition table
-	    $o->ask_warn('', N("You'll need to create a PPC PReP Boot bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"));
-	}
-    }
-
-    if (!$o->{isUpgrade}) {
-        install_interactive::partitionWizard($o);
-    }
-}
-
-#------------------------------------------------------------------------------
-sub rebootNeeded {
-    my ($o) = @_;
-    $o->ask_warn('', N("You need to reboot for the partition table modifications to take place"));
-
-    install_steps::rebootNeeded($o);
-}
-
-#------------------------------------------------------------------------------
-sub choosePartitionsToFormat {
-    my ($o, $fstab) = @_;
-
-    $o->SUPER::choosePartitionsToFormat($fstab);
-
-    my @l = grep { !$_->{isMounted} && $_->{mntpoint} && 
-		   (!isSwap($_) || $::expert) &&
-		   (!isFat_or_NTFS($_) || $_->{notFormatted} || $::expert) &&
-		   (!isOtherAvailableFS($_) || $::expert || $_->{toFormat});
-	       } @$fstab;
-    $_->{toFormat} = 1 foreach grep { isSwap($_) && !$::expert } @$fstab;
-
-    return if @l == 0 || !$::expert && every { $_->{toFormat} } @l;
-
-    #- keep it temporary until the guy has accepted
-    $_->{toFormatTmp} = $_->{toFormat} || $_->{toFormatUnsure} foreach @l;
-
-    $o->ask_from_(
-        { messages => N("Choose the partitions you want to format"),
-	  interactive_help_id => 'formatPartitions',
-          advanced_messages => N("Check bad blocks?"),
-        },
-        [ map { 
-	    my $e = $_;
-	    ({
-	      text => partition_table::description($e), type => 'bool',
-	      val => \$e->{toFormatTmp}
-	     }, if_(!isLoopback($_) && !member($_->{fs_type}, 'reiserfs', 'xfs', 'jfs'), {
-	      text => partition_table::description($e), type => 'bool', advanced => 1, 
-	      disabled => sub { !$e->{toFormatTmp} },
-	      val => \$e->{toFormatCheck}
-        })) } @l ]
-    ) or die 'already displayed';
-    #- ok now we can really set toFormat
-    foreach (@l) {
-	$_->{toFormat} = delete $_->{toFormatTmp};
-	set_isFormatted($_, 0);
-    }
-}
-
-
-sub formatMountPartitions {
-    my ($o, $_fstab) = @_;
-    my ($w, $wait_message) = fs::format::wait_message($o);
-    catch_cdie {
-        fs::formatMount_all($o->{all_hds}{raids}, $o->{fstab}, $o->{prefix}, $wait_message);
-    } sub { 
-	$@ =~ /fsck failed on (\S+)/ or return;
-	$o->ask_yesorno('', N("Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)", $1), 1);
-    };
-    undef $w; #- help perl (otherwise wait_message stays forever in newt)
-    die N("Not enough swap space to fulfill installation, please add some") if availableMemory() < 40 * 1024;
-}
-
-#------------------------------------------------------------------------------
-sub setPackages {
-    my ($o, $rebuild_needed) = @_;
-
-    my $w = $o->wait_message('', $rebuild_needed ? N("Looking for available packages and rebuilding rpm database...") :
-			     N("Looking for available packages..."));
-    install_any::setPackages($o, $rebuild_needed);
-
-    $w->set(N("Looking at packages already installed..."));
-    pkgs::selectPackagesAlreadyInstalled($o->{packages});
-
-    if ($rebuild_needed) {
-	$w->set(N("Finding packages to upgrade..."));
-	pkgs::selectPackagesToUpgrade($o->{packages});
-    }
-}
-
-sub mirror2text { $crypto::mirrors{$_[0]} ? $crypto::mirrors{$_[0]}[0] . '|' . $_[0] : "-|URL" }
-sub askSupplMirror {
-    my ($o, $message) = @_;
-    my $u = $o->{updates} ||= {};
-    require crypto;
-    my @mirrors = do {
-	#- Direct the user to the community mirror tree for an install from a mini-iso
-	$o->{distro_type} ||= 'community';
-	#- get the list of mirrors locally, to avoid weird bugs with making an
-	#- http request before ftp at this point of the install
-	crypto::mirrors($o->{distro_type}, 1);
-    };
-    push @mirrors, '-';
-    $o->ask_from_(
-	{
-	    messages => N("Choose a mirror from which to get the packages"),
-	    cancel => N("Cancel"),
-	},
-	[ { separator => '|',
-	    format => \&mirror2text,
-	    list => \@mirrors,
-	    val => \$u->{mirror},
-	}, ],
-    ) or $u->{mirror} = '';
-    delete $o->{updates};
-    if ($u->{mirror} eq '-') {
-	return $o->ask_from_entry('', $message) || '';
-    }
-    my $url = "ftp://$u->{mirror}$crypto::mirrors{$u->{mirror}}[1]";
-    $url =~ s!/(?:media/)?main/?\z!!;
-    log::l("mirror chosen [$url]");
-    return $url;
-}
-
-sub selectSupplMedia {
-    my ($o, $suppl_method) = @_;
-    install_any::selectSupplMedia($o, $suppl_method);
-}
-#------------------------------------------------------------------------------
-sub choosePackages {
-    my ($o, $packages, $compssUsers, $_first_time) = @_;
-
-    #- this is done at the very beginning to take into account
-    #- selection of CD by user if using a cdrom.
-    $o->chooseCD($packages) if install_any::method_allows_medium_change($o->{method});
-
-    my $w = $o->wait_message('', N("Looking for available packages..."));
-    my $availableC = &install_steps::choosePackages;
-    my $individual;
-
-    require pkgs;
-
-    my $min_size = pkgs::selectedSize($packages);
-    undef $w;
-    if ($min_size >= $availableC) {
-	$o->ask_warn('', N("Your system does not have enough space left for installation or upgrade (%d > %d)",
-			   $min_size, $availableC));
-	install_steps::rebootNeeded($o);
-    }
-
-    my $min_mark = 4;
-
-  chooseGroups:
-    $o->chooseGroups($packages, $compssUsers, $min_mark, \$individual) if !$o->{isUpgrade} && $o->{meta_class} ne 'desktop';
-
-    ($o->{packages_}{ind}) =
-      pkgs::setSelectedFromCompssList($packages, $o->{rpmsrate_flags_chosen}, $min_mark, $availableC);
-
-    $o->choosePackagesTree($packages) or goto chooseGroups if $individual;
-
-    install_any::warnAboutRemovedPackages($o, $o->{packages});
-    install_any::warnAboutNaughtyServers($o) or goto chooseGroups if !$o->{isUpgrade} && $o->{meta_class} ne 'firewall';
-}
-
-sub choosePackagesTree {
-    my ($o, $packages, $o_limit_to_medium) = @_;
-
-    $o->ask_many_from_list('', N("Choose the packages you want to install"),
-			   {
-			    list => [ grep { !$o_limit_to_medium || pkgs::packageMedium($packages, $_) == $o_limit_to_medium }
-				      @{$packages->{depslist}} ],
-			    value => \&URPM::Package::flag_selected,
-			    label => \&URPM::Package::name,
-			    sort => 1,
-			   });
-}
-sub loadSavePackagesOnFloppy {
-    my ($o, $packages) = @_;
-    $o->ask_from('', 
-N("Please choose load or save package selection.
-The format is the same as auto_install generated files."),
-		 [ { val => \ (my $choice), list => [ N_("Load"), N_("Save") ], format => \&translate, type => 'list' } ]) or return;
-
-    if ($choice eq 'Load') {
-	while (1) {
-	    log::l("load package selection");
-	    my ($_h, $fh) = install_any::media_browser($o, '', 'package_list.pl') or return;
-	    my $O = eval { install_any::loadO(undef, $fh) };
-	    if ($@) {
-		$o->ask_okcancel('', N("Bad file")) or return;
-	    } else {
-		install_any::unselectMostPackages($o);
-		foreach (@{$O->{default_packages} || []}) {
-		    my $pkg = pkgs::packageByName($packages, $_);
-		    pkgs::selectPackage($packages, $pkg) if $pkg;
-		}
-		return 1;
-	    }
-	}
-    } else {
-	log::l("save package selection");
-	install_any::g_default_packages($o);
-    }
-}
-sub chooseGroups {
-    my ($o, $packages, $compssUsers, $min_level, $individual) = @_;
-
-    #- for all groups available, determine package which belongs to each one.
-    #- this will enable getting the size of each groups more quickly due to
-    #- limitation of current implementation.
-    #- use an empty state for each one (no flag update should be propagated).
-    
-    my $b = pkgs::saveSelected($packages);
-    install_any::unselectMostPackages($o);
-    pkgs::setSelectedFromCompssList($packages, { CAT_SYSTEM => 1 }, $min_level, 0);
-    my $system_size = pkgs::selectedSize($packages);
-    my ($sizes, $pkgs) = pkgs::computeGroupSize($packages, $min_level);
-    pkgs::restoreSelected($b);
-    log::l("system_size: $system_size");
-
-    my %stable_flags = grep_each { $::b } %{$o->{rpmsrate_flags_chosen}};
-    delete $stable_flags{"CAT_$_"} foreach map { @{$_->{flags}} } @{$o->{compssUsers}};
-
-    my $compute_size = sub {
-	my %pkgs;
-	my %flags = %stable_flags; @flags{@_} = ();
-	my $total_size;
-	A: while (my ($k, $size) = each %$sizes) {
-	    Or: foreach (split "\t", $k) {
-		  foreach (split "&&") {
-		      exists $flags{$_} or next Or;
-		  }
-		  $total_size += $size;
-		  $pkgs{$_} = 1 foreach @{$pkgs->{$k}};
-		  next A;
-	      }
-	  }
-	log::l("computed size $total_size (flags " . join(' ', keys %flags) . ")");
-	log::l("chooseGroups: ", join(" ", sort keys %pkgs));
-
-	int $total_size;
-    };
-
-    my ($size, $unselect_all);
-    my $available_size = install_any::getAvailableSpace($o) / sqr(1024);
-    my $size_to_display = sub { 
-	my $lsize = $system_size + $compute_size->(map { "CAT_$_" } map { @{$_->{flags}} } grep { $_->{selected} } @$compssUsers);
-
-	#- if a profile is deselected, deselect everything (easier than deselecting the profile packages)
-	$unselect_all ||= $size > $lsize;
-	$size = $lsize;
-	N("Total size: %d / %d MB", pkgs::correctSize($size / sqr(1024)), $available_size);
-    };
-
-    while (1) {
-	if ($available_size < 200) {
-	    # too small to choose anything. Defaulting to no group chosen
-	    $_->{selected} = 0 foreach @$compssUsers;
-	    last;
-	}
-
-	$o->reallyChooseGroups($size_to_display, $individual, $compssUsers) or return;
-
-	last if $::testing || pkgs::correctSize($size / sqr(1024)) < $available_size || every { !$_->{selected} } @$compssUsers;
-       
-	$o->ask_warn('', N("Selected size is larger than available space"));	
-    }
-    install_any::set_rpmsrate_category_flags($o, $compssUsers);
-
-    log::l("compssUsersChoice selected: ", join(', ', map { qq("$_->{path}|$_->{label}") } grep { $_->{selected} } @$compssUsers));
-
-    #- do not try to deselect package (by default no groups are selected).
-    if (!$o->{isUpgrade}) {
-	install_any::unselectMostPackages($o) if $unselect_all;
-    }
-    #- if no group have been chosen, ask for using base system only, or no X, or normal.
-    if (!$o->{isUpgrade} && !any { $_->{selected} } @$compssUsers) {
-	my $docs = !$o->{excludedocs};	
-	my $minimal;
-
-	$o->ask_from(N("Type of install"), 
-		     N("You have not selected any group of packages.
-Please choose the minimal installation you want:"),
-		     [
-		      { val => \$o->{rpmsrate_flags_chosen}{CAT_X}, type => 'bool', text => N("With X"), disabled => sub { $minimal } },
-		      { val => \$docs, type => 'bool', text => N("With basic documentation (recommended!)"), disabled => sub { $minimal } },
-		      { val => \$minimal, type => 'bool', text => N("Truly minimal install (especially no urpmi)") },
-		     ],
-		     changed => sub { $o->{rpmsrate_flags_chosen}{CAT_X} = $docs = 0 if $minimal },
-	) or return &chooseGroups;
-
-	if ($minimal) {
-	    $o->{rpmsrate_flags_chosen}{CAT_X} = $docs = 0; #- redo it in "changed" was not called
-	    $o->{rpmsrate_flags_chosen}{CAT_SYSTEM} = 0;
-	}
-	$o->{excludedocs} = !$docs;
-
-	install_any::unselectMostPackages($o);
-    }
-    1;
-}
-
-sub reallyChooseGroups {
-    my ($o, $size_to_display, $individual, $compssUsers) = @_;
-
-    my $size_text = &$size_to_display;
-
-    my ($path, $all);
-    $o->ask_from_({ messages => N("Package Group Selection"),
-		    interactive_help_id => 'choosePackages',
-		    callbacks => { changed => sub { $size_text = &$size_to_display } },
-		  }, [
-        { val => \$size_text, type => 'label' }, {},
-	 (map { 
-	       my $old = $path;
-	       $path = $_->{path};
-	       if_($old ne $path, { val => translate($path) }),
-		 {
-		  val => \$_->{selected},
-		  type => 'bool',
-		  disabled => sub { $all },
-		  text => translate($_->{label}),
-		  help => translate($_->{descr}),
-		 };
-	   } @$compssUsers),
-	 if_($o->{meta_class} eq 'desktop', { text => N("All"), val => \$all, type => 'bool' }),
-	 if_($individual, { text => N("Individual package selection"), val => $individual, advanced => 1, type => 'bool' }),
-    ]);
-
-    if ($all) {
-	$_->{selected} = 1 foreach @$compssUsers;
-    }
-    1;    
-}
-
-sub chooseCD {
-    my ($o, $packages) = @_;
-    my @mediums = grep { $_ != $install_any::boot_medium } pkgs::allMediums($packages);
-    my @mediumsDescr;
-    my %mediumsDescr;
-
-    #- the boot medium is already selected.
-    $mediumsDescr{pkgs::mediumDescr($packages, $install_any::boot_medium)} = 1;
-
-    #- build mediumDescr according to mediums, this avoid asking multiple times
-    #- all the medium grouped together on only one CD.
-    foreach (@mediums) {
-	my $descr = pkgs::mediumDescr($packages, $_);
-	$packages->{mediums}{$_}{ignored} and next;
-	exists $mediumsDescr{$descr} or push @mediumsDescr, $descr;
-	$mediumsDescr{$descr} ||= $packages->{mediums}{$_}{selected};
-    }
-
-    if (install_any::method_is_from_ISO_images($o->{method})) {
-        $mediumsDescr{$_} = install_any::method_is_from_ISO_images($packages->{mediums}{$_}{method})
-	    ? to_bool(install_any::find_ISO_image_labelled($_)) : 1
-	    foreach @mediumsDescr;
-    } elsif ($o->{method} eq "cdrom") {
-        #- if no other medium available or a poor beginner, we are choosing for him!
-        #- note first CD is always selected and should not be unselected!
-        return if @mediumsDescr == () || !$::expert;
-
-        #    $o->set_help('chooseCD');
-        $o->ask_many_from_list('',
-N("If you have all the CDs in the list below, click Ok.
-If you have none of those CDs, click Cancel.
-If only some CDs are missing, unselect them, then click Ok."),
-			   {
-			    list => \@mediumsDescr,
-			    label => sub { N("Cd-Rom labeled \"%s\"", $_[0]) },
-			    val => sub { \$mediumsDescr{$_[0]} },
-			   }) or do {
-			       $mediumsDescr{$_} = 0 foreach @mediumsDescr; #- force unselection of other CDs.
-			   };
-    }
-
-    #- restore true selection of medium (which may have been grouped together)
-    foreach (@mediums) {
-	my $descr = pkgs::mediumDescr($packages, $_);
-	$packages->{mediums}{$_}{ignored} and next;
-	$packages->{mediums}{$_}{selected} = $mediumsDescr{$descr};
-	log::l("select status of medium $_ is $packages->{mediums}{$_}{selected}");
-    }
-}
-
-#------------------------------------------------------------------------------
-sub installPackages {
-    my ($o, $packages) = @_;
-    my ($current, $total) = (0, 0);
-
-    my $w = $o->wait_message(N("Installing"), N("Preparing installation"));
-
-    my $old = \&pkgs::installCallback;
-    local *pkgs::installCallback = sub {
-	my ($data, $type, $id, $subtype, $_amount, $total_) = @_;
-	if ($type eq 'user' && $subtype eq 'install') {
-	    $total = $total_;
-	} elsif ($type eq 'inst' && $subtype eq 'start') {
-	    my $p = $data->{depslist}[$id];
-	    $w->set(N("Installing package %s\n%d%%", $p->name, $total && 100 * $current / $total));
-	    $current += $p->size;
-	} else { goto $old }
-    };
-
-    #- the modification is not local as the box should be living for other package installation.
-    #- BEWARE this is somewhat duplicated (but not exactly from gtk code).
-    undef *install_any::changeMedium;
-    *install_any::changeMedium = sub {
-	my ($method, $medium) = @_;
-
-	#- if not using a cdrom medium or an iso image, always abort.
-	return if !install_any::method_allows_medium_change($method);
-
-	my $name = pkgs::mediumDescr($o->{packages}, $medium);
-	local $| = 1; print "\a";
-	my $r = $name !~ /commercial/i || ($o->{useless_thing_accepted2} ||= $o->ask_from_list_('', formatAlaTeX(install_messages::com_license()), [ N_("Accept"), N_("Refuse") ], "Accept") eq "Accept");
-	if ($method =~ /-iso$/) {
-	    $r = install_any::changeIso($name);
-	} else {
-            $r &&= $o->ask_okcancel('', N("Change your Cd-Rom!
-Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.
-If you do not have it, press Cancel to avoid installation from this Cd-Rom.", $name), 1);
-	}
-	return $r;
-    };
-    my $install_result;
-    catch_cdie { $install_result = $o->install_steps::installPackages($packages) }
-      sub {
-	  if ($@ =~ /^error ordering package list: (.*)/) {
-	      $o->ask_yesorno('', [
-N("There was an error ordering packages:"), $1, N("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  } elsif ($@ =~ /^error installing package list: (.*)/) {
-	      $o->ask_yesorno('', [
-N("There was an error installing packages:"), $1, N("Go on anyway?") ], 1) and return 1;
-	      ${$_[0]} = "already displayed";
-	  }
-	  0;
-      };
-    if ($pkgs::cancel_install) {
-	$pkgs::cancel_install = 0;
-	die "setstep choosePackages\n";
-    }
-    $install_result;
-}
-
-sub afterInstallPackages($) {
-    my ($o) = @_;
-    my $_w = $o->wait_message('', N("Post-install configuration"));
-    $o->SUPER::afterInstallPackages;
-}
-
-sub updatemodules {
-    my ($o, $dev, $rel_dir) = @_;
-
-    $o->ask_okcancel('', N("Please ensure the Update Modules media is in drive %s", $dev), 1) or return;
-    $o->SUPER::updatemodules($dev, $rel_dir);
-}
-
-#------------------------------------------------------------------------------
-sub configureNetwork {
-    my ($o) = @_;
-    require network::ethernet;
-    modules::load_category($o->{modules_conf}, list_modules::ethernet_categories());
-
-    if ($o->{meta_class} eq 'firewall') {
-	require network::netconnect;
-	network::netconnect::main($o->{netcnx} ||= {}, $o, $o->{modules_conf}, $o->{netc}, $o->{mouse}, $o->{intf}, 0, 1);
-    } else {
-	require network::network;
-	network::network::easy_dhcp($o->{modules_conf}, $o->{netc}, $o->{intf}) and $o->{netcnx}{type} = 'lan';
-	$o->SUPER::configureNetwork;
-    }
-}
-
-#------------------------------------------------------------------------------
-sub installUpdates {
-    my ($o) = @_;
-    my $u = $o->{updates} ||= {};
-    
-    $o->hasNetwork or return;
-
-    if (is_empty_hash_ref($u)) {
-	$o->ask_yesorno_({ messages => formatAlaTeX(
-N("You now have the opportunity to download updated packages. These packages
-have been updated after the distribution was released. They may
-contain security or bug fixes.
-
-To download these packages, you will need to have a working Internet 
-connection.
-
-Do you want to install the updates?")),
-			   interactive_help_id => 'installUpdates',
-					       }) or return;
-    }
-
-    #- bring all interface up for installing crypto packages.
-    install_interactive::upNetwork($o);
-
-    #- update medium available and working.
-    my $update_medium;
-    do {
-	require crypto;
-	eval {
-	    my @mirrors = do {
-		my $_w = $o->wait_message('', N("Contacting Mandriva Linux web site to get the list of available mirrors..."));
-		crypto::mirrors($o->{distro_type});
-	    };
-	    #- if no mirror have been found, use current time zone and propose among available.
-	    $u->{mirror} ||= crypto::bestMirror($o->{timezone}{timezone}, $o->{distro_type});
-	    $o->ask_from_({ messages => N("Choose a mirror from which to get the packages"),
-			    cancel => N("Cancel"),
-			  }, [ { separator => '|',
-				 format => \&crypto::mirror2text,
-				 list => \@mirrors,
-				 val => \$u->{mirror},
-			       },
-			     ],
-			 ) or $u->{mirror} = '';
-	};
-	return if $@ || !$u->{mirror};
-
-	eval {
-	    if ($u->{mirror}) {
-		my $_w = $o->wait_message('', N("Contacting the mirror to get the list of available packages..."));
-		$update_medium = crypto::getPackages($o->{packages}, $u->{mirror});
-	    }
-	};
-    } while $@ || !$update_medium && $o->ask_yesorno('', N("Unable to contact mirror %s", $u->{mirror}) . ($@ ? " :\n$@" : "") . "\n\n" . N("Would you like to try again?"));
-
-    if ($update_medium) {
-	if ($o->choosePackagesTree($o->{packages}, $update_medium)) {
-	    $o->{isUpgrade} = 1; #- now force upgrade mode, else update will be installed instead of upgraded.
-	    $o->pkg_install;
-	} else {
-	    #- make sure to not try to install the packages (which are automatically selected by getPackage above).
-	    #- this is possible by deselecting the medium (which can be re-selected above).
-	    delete $update_medium->{selected};
-	}
-	#- update urpmi even, because there is an hdlist available and everything is good,
-	#- this will allow user to update the medium but update his machine later.
-	$o->install_urpmi;
-    }
- 
-    #- stop interface using ppp only. FIXME REALLY TOCHECK isdn (costly network) ?
-    # FIXME damien install_interactive::downNetwork($o, 'pppOnly');
-}
-
-
-#------------------------------------------------------------------------------
-sub configureTimezone {
-    my ($o, $clicked) = @_;
-
-    require timezone;
-    $o->{timezone}{timezone} = $o->ask_from_treelist('', N("Which is your timezone?"), '/', [ timezone::getTimeZones() ], $o->{timezone}{timezone}) || return;
-
-    my $ntp = to_bool($o->{timezone}{ntp});
-    $o->ask_from_({ interactive_help_id => 'configureTimezoneGMT' }, [
-	  { text => N("Hardware clock set to GMT"), val => \$o->{timezone}{UTC}, type => 'bool' },
-	  { text => N("Automatic time synchronization (using NTP)"), val => \$ntp, type => 'bool' },
-    ]) or goto &configureTimezone
-	    if $::expert || $clicked;
-    if ($ntp) {
-	my $servers = timezone::ntp_servers();
-	$o->{timezone}{ntp} ||= 'pool.ntp.org';
-
-	$o->ask_from_({},
-	    [ { label => N("NTP Server"), val => \$o->{timezone}{ntp}, list => [ keys %$servers ], not_edit => 0,
-		format => sub { $servers->{$_[0]} ? "$servers->{$_[0]} ($_[0])" : $_[0] } } ]
-        ) or goto &configureTimezone;
-    } else {
-	$o->{timezone}{ntp} = '';
-    }
-    install_steps::configureTimezone($o);
-    1;
-}
-
-#------------------------------------------------------------------------------
-sub configureServices { 
-    my ($o, $clicked) = @_;
-    require services;
-    $o->{services} = services::ask($o) if $::expert || $clicked;
-    install_steps::configureServices($o);
-}
-
-
-sub summaryBefore {
-    my ($o) = @_;
-
-    #- auto-detection
-    $o->configurePrinter(0);
-    install_any::preConfigureTimezone($o);
-    #- get back network configuration.
-    require network::network;
-    eval {
-	network::network::read_all_conf($o->{prefix}, $o->{netc} ||= {}, $o->{intf} ||= {}, $o->{netcnx} ||= {});
-    };
-    log::l("summaryBefore: network configuration: ", formatError($@)) if $@;
-}
-
-sub summary_prompt {
-    my ($o, $l, $check_complete) = @_;
-
-    foreach (@$l) {
-	my $val = $_->{val};
-	($_->{format}, $_->{val}) = (sub { $val->() || N("not configured") }, '');
-    }
-    
-    $o->ask_from_({
-		   messages => N("Summary"),
-		   interactive_help_id => 'summary',
-		   cancel   => '',
-		   callbacks => { complete => sub { !$check_complete->() } },
-		  }, $l);
-}
-
-sub summary {
-    my ($o) = @_;
-
-    my @l;
-
-    push @l, {
-	group => N("System"), 
-	label => N("Keyboard"), 
-	val => sub { $o->{keyboard} && translate(keyboard::keyboard2text($o->{keyboard})) },
-	clicked => sub { $o->selectKeyboard(1) },
-    };
-
-    my $timezone_manually_set;  
-    push @l, {
-	group => N("System"),
-	label => N("Country / Region"),
-	val => sub { lang::c2name($o->{locale}{country}) },
-	clicked => sub {
-	    any::selectCountry($o, $o->{locale}) or return;
-
-	    my $pkg_locale = lang::locale_to_main_locale(lang::getlocale_for_country($o->{locale}{lang}, $o->{locale}{country}));
-	    my @pkgs = pkgs::packagesProviding($o->{packages}, "locales-$pkg_locale");
-	    $o->pkg_install(map { $_->name } @pkgs) if @pkgs;
-
-	    lang::write($o->{locale});
-	    if (!$timezone_manually_set) {
-		delete $o->{timezone};
-		install_any::preConfigureTimezone($o); #- now we can precise the timezone thanks to the country
-	    }
-	},
-    };
-    push @l, {
-	group => N("System"),
-	label => N("Timezone"),
-	val => sub { $o->{timezone}{timezone} },
-	clicked => sub { $timezone_manually_set = $o->configureTimezone(1) || $timezone_manually_set },
-    };
-
-    push @l, {
-	group => N("System"),
-	label => N("Mouse"),
-	val => sub { translate($o->{mouse}{type}) . ' ' . translate($o->{mouse}{name}) },
-	clicked => sub { $o->selectMouse(1); mouse::write($o->do_pkgs, $o->{mouse}) },
-    };
-
-    push @l, {
-	group => N("Hardware"),
-	label => N("Printer"),
-	val => sub {
-	    if (is_empty_hash_ref($o->{printer}{configured})) {
-		require pkgs;
-		my $p = pkgs::packageByName($o->{packages}, 'cups');
-		$p && $p->flag_installed ? N("Remote CUPS server") : N("No printer");
-	    } elsif (defined($o->{printer}{configured}{$o->{printer}{DEFAULT}})  &&
-		     (my $p = find { $_ && ($_->{make} || $_->{model}) }
-		      $o->{printer}{configured}{$o->{printer}{DEFAULT}}{queuedata})) {
-		"$p->{make} $p->{model}";
-	    } elsif ($p = find { $_ && ($_->{make} || $_->{model}) }
-		      map { $_->{queuedata} } (values %{$o->{printer}{configured}})) {
-		"$p->{make} $p->{model}";
-	    } else {
-		N("Remote CUPS server"); #- fall back in case of something wrong.
-	    }
-	},
-	clicked => sub { $o->configurePrinter(1) },
-    };
-  
-    my @sound_cards = detect_devices::getSoundDevices();
-
-    my $sound_index = 0;
-    foreach my $device (@sound_cards) {
-	$device->{sound_slot_index} = $sound_index;
-	push @l, {
-	    group => N("Hardware"),
-	    label => N("Sound card"),
-	    val => sub { 
-		$device->{driver} && modules::module2description($device->{driver}) || $device->{description};
-	    },
-	    clicked => sub {
-	        require harddrake::sound; 
-	        harddrake::sound::config($o, $o->{modules_conf}, $device);
-	    },
-	};
-     $sound_index++;
-    }
-
-    if (!@sound_cards && ($o->{rpmsrate_flags_chosen}{CAT_GAMES} || $o->{rpmsrate_flags_chosen}{CAT_AUDIO})) {
-	#- if no sound card are detected AND the user selected things needing a sound card,
-	#- propose a special case for ISA cards
-	push @l, {
-	    group => N("Hardware"),
-	    label => N("Sound card"),
-	    val => sub {},
-	    clicked => sub {
-	        if ($o->ask_yesorno('', N("Do you have an ISA sound card?"))) {
-	    	  $o->do_pkgs->install(qw(alsa-utils sndconfig));
-	    	  $o->ask_warn('', N("Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound card"));
-	        } else {
-	    	  $o->ask_warn('', N("No sound card detected. Try \"harddrake\" after installation"));
-	        }
-	    },
-	};
-    }
-
-    foreach my $tv (detect_devices::getTVcards()) {
-	push @l, {
-	    group => N("Hardware"),
-	    label => N("TV card"),
-	    val => sub { $tv->{description} }, 
-	    clicked => sub { 
-	        require harddrake::v4l; 
-	        harddrake::v4l::config($o, $o->{modules_conf}, $tv->{driver});
-	    }
-	};
-    }
-
-    push @l, {
-	group => N("Hardware"),
-	label => N("Graphical interface"),
-	val => sub { $o->{raw_X} ? Xconfig::various::to_string($o->{raw_X}) : '' },
-	clicked => sub { configureX($o, 'expert') }, 
-    };
-
-    push @l, {
-	group => N("Network & Internet"),
-	label => N("Network"),
-	val => sub { $o->{netcnx}{type} },
-	clicked => sub { 
-	    local $::expert = $::expert;
-	    require network::netconnect;
-	    network::netconnect::main($o->{netcnx} ||= {}, $o, $o->{modules_conf}, $o->{netc}, $o->{mouse}, $o->{intf}, 0, 1);
-	    #- in case netcnx type is not updated.
-	    require network::network;
-	    network::network::probe_netcnx_type($o->{prefix}, $o->{netc}, $o->{intf}, $o->{netcnx});
-	},
-    };
-
-    $::o->{miscellaneous} ||= {};
-    push @l, {
-	group => N("Network & Internet"),
-	label => N("Proxies"),
-	val => sub { $::o->{miscellaneous}{http_proxy} || $::o->{miscellaneous}{ftp_proxy} ? N("configured") : N("not configured") },
-	clicked => sub { 
-	    require network::network;
-         network::network::miscellaneous_choose($o, $::o->{miscellaneous});
-         network::network::proxy_configure($::o->{miscellaneous}) if !$::testing;
-	},
-    };
-
-    push @l, {
-	group => N("Security"),
-	label => N("Security Level"),
-	val => sub { 
-	    require security::level;
-	    security::level::to_string($o->{security});
-	},
-	clicked => sub {
-	    require security::level;
-	    security::level::level_choose($o, \$o->{security}, \$o->{libsafe}, \$o->{security_user})
-		and install_any::set_security($o);
-	},
-    };
-
-    push @l, {
-	group => N("Security"),
-	label => N("Firewall"),
-	val => sub { 
-	    require network::shorewall;
-	    my $shorewall = network::shorewall::read();
-	    $shorewall && !$shorewall->{disabled} ? N("activated") : N("disabled");
-	},
-	clicked => sub { 
-	    require network::drakfirewall;
-	    if (my @rc = network::drakfirewall::main($o, $o->{security} <= 3)) {
-		$o->{firewall_ports} = !$rc[0] && $rc[1];
-	    }
-	},
-    } if detect_devices::getNet();
-
-    push @l, {
-	group => N("Boot"),
-	label => N("Bootloader"),
-	val => sub { 
-	    #-PO: example: lilo-graphic on /dev/hda1
-	    N("%s on %s", $o->{bootloader}{method}, $o->{bootloader}{boot});
-	},
-	clicked => sub { 
-	    any::setupBootloader($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}) or return;
-	    any::installBootloader($o, $o->{bootloader}, $o->{all_hds});
-	},
-    };
-
-    push @l, {
-	group => N("System"),
-	label => N("Services"),
-	val => sub {
-	    require services;
-	    my ($l, $activated) = services::services();
-	    N("Services: %d activated for %d registered", int(@$activated), int(@$l));
-	},
-	clicked => sub { 
-	    require services;
-	    $o->{services} = services::ask($o) and services::doit($o, $o->{services});
-	},
-    };
-
-    my $check_complete = sub {
-	$o->{raw_X} || !$::testing && !pkgs::packageByName($o->{packages}, 'xorg-x11')->flag_installed ||
-	$o->ask_yesorno('', N("You have not configured X. Are you sure you really want this?"));
-    };
-
-    $o->summary_prompt(\@l, $check_complete);
-
-    if ($o->{printer}) {
-	#- Clean up $o->{printer} so that the records for an auto-installation
-	#- contain only the important stuff
-	require printer::printerdrake;
-	printer::printerdrake::final_cleanup($o->{printer});
-    }
-    install_steps::configureTimezone($o) if !$timezone_manually_set;  #- do not forget it.
-}
-
-#------------------------------------------------------------------------------
-sub configurePrinter {
-    my ($o, $clicked) = @_;
-
-    require printer::main;
-    require printer::printerdrake;
-    require printer::detect;
-
-    #- $clicked = 0: Preparation of "Summary" step, check whether there are
-    #- are local printers. Continue for automatically setting up print
-    #- queues if so, return otherwise
-    #- $clicked = 1: User clicked "Configure" button in "Summary", enter
-    #- Printerdrake for manual configuration
-    my $go_on = $clicked ? 2 : $o && printer::detect::local_detect();
-    $go_on-- or return;
-
-    #- install packages needed for printer::getinfo()
-    $::testing or $o->do_pkgs->install('foomatic-db-engine');
-
-    #- take default configuration, this include choosing the right spooler
-    #- currently used by the system.
-    my $printer = $o->{printer} ||= {};
-    eval { add2hash($printer, printer::main::getinfo($o->{prefix})) };
-
-    $printer->{PAPERSIZE} = $o->{locale}{country} eq 'US' || $o->{locale}{country} eq 'CA' ? 'Letter' : 'A4';
-    printer::printerdrake::main($printer, $o->{security}, $o, $clicked, sub { install_interactive::upNetwork($o, 'pppAvoided') });
-
-}
-    
-#------------------------------------------------------------------------------
-sub setRootPassword {
-    my ($o, $clicked) = @_;
-    my $sup = $o->{superuser} ||= {};
-    $sup->{password2} ||= $sup->{password} ||= "";
-
-    if ($o->{security} >= 1 || $clicked) {
-	require authentication;
-	authentication::ask_root_password_and_authentication($o, $o->{netc}, $sup, $o->{authentication} ||= {}, $o->{meta_class}, $o->{security});
-    }
-    install_steps::setRootPassword($o);
-}
-
-#------------------------------------------------------------------------------
-#-addUser
-#------------------------------------------------------------------------------
-sub addUser {
-    my ($o, $clicked) = @_;
-    $o->{users} ||= [];
-
-    if ($o->{security} < 1) {
-	push @{$o->{users}}, { password => 'mandrake', realname => 'default', icon => 'automagic' } 
-	  if !member('mandrake', map { $_->{name} } @{$o->{users}});
-    }
-    if ($o->{security} >= 1 || $clicked) {
-	my @suggested_names = @{$o->{users}} ? () : grep { !/lost\+found/ } all("$::prefix/home");
-	any::ask_users($o, $o->{users}, $o->{security}, \@suggested_names);
-    }
-    add2hash($o, any::get_autologin());
-    any::autologin($o, $o);
-
-    install_steps::addUser($o);
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloaderBefore {
-    my ($o) = @_;
-    my $_w = $o->wait_message('', N("Preparing bootloader..."));
-    $o->SUPER::setupBootloaderBefore;
-}
-
-#------------------------------------------------------------------------------
-sub setupBootloader {
-    my ($o, $ent_number) = @_;
-    if (arch() =~ /ppc/) {
-	if (detect_devices::get_mac_generation() !~ /NewWorld/ && 
-	    detect_devices::get_mac_model() !~ /IBM/) {
-	    $o->ask_warn('', N("You appear to have an OldWorld or Unknown machine, the yaboot bootloader will not work for you. The install will continue, but you'll need to use BootX or some other means to boot your machine. The kernel argument for the root fs is: root=%s", '/dev/' . fs::get::root_($o->{fstab})->{device}));
-	    log::l("OldWorld or Unknown Machine - no yaboot setup");
-	    return;
-	}
-    }
-    if (arch() =~ /^alpha/) {
-	$o->ask_yesorno('', N("Do you want to use aboot?"), 1) or return;
-	catch_cdie { $o->SUPER::setupBootloader } sub {
-	    $o->ask_yesorno('', 
-N("Error installing aboot, 
-try to force installation even if that destroys the first partition?"));
-	};
-    } else {
-	if ($ent_number == 1) {
-	    any::setupBootloader_simple($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}) or return;
-	} else {
-	    any::setupBootloader($o, $o->{bootloader}, $o->{all_hds}, $o->{fstab}, $o->{security}) or return;
-	}
-	any::installBootloader($o, $o->{bootloader}, $o->{all_hds}) or die "already displayed";
-    }
-}
-
-sub miscellaneous {
-    my ($o, $_clicked) = @_;
-
-    if ($o->{meta_class} ne 'desktop' && $o->{meta_class} ne 'firewall' && !$o->{isUpgrade}) {
-	require security::level;
-	security::level::level_choose($o, \$o->{security}, \$o->{libsafe}, \$o->{security_user});
-
-	if ($o->{security} > 2 && find { $_->{fs_type} eq 'vfat' } @{$o->{fstab}}) {
-	    $o->ask_okcancel('', N("In this security level, access to the files in the Windows partition is restricted to the administrator."))
-	      or goto &miscellaneous;
-	}
-    }
-
-    install_steps::miscellaneous($o);
-}
-
-#------------------------------------------------------------------------------
-sub configureX {
-    my ($o, $expert) = @_;
-
-    install_steps::configureXBefore($o);
-    symlink "$o->{prefix}/etc/gtk", "/etc/gtk";
-
-    require Xconfig::main;
-    my ($raw_X) = Xconfig::main::configure_everything_or_configure_chooser($o, install_any::X_options_from_o($o), !$expert, $o->{keyboard}, $o->{mouse});
-    if ($raw_X) {
-	$o->{raw_X} = $raw_X;
-	install_steps::configureXAfter($o);
-    }
-}
-
-#------------------------------------------------------------------------------
-sub generateAutoInstFloppy {
-    my ($o, $replay) = @_;
-    my @imgs = install_any::getAndSaveAutoInstallFloppies($o, $replay) or return;
-
-    my $floppy = detect_devices::floppy();
-    $o->ask_okcancel('', N("Insert a blank floppy in drive %s", $floppy), 1) or return;
-
-    my $i;
-    foreach (@imgs) {
-	if ($i++) {
-	    $o->ask_okcancel('', N("Please insert another floppy for drivers disk"), 1) or return;
-	}
-	my $_w = $o->wait_message('', N("Creating auto install floppy..."));
-	require commands;
-	commands::dd("if=$_", 'of=' . devices::make($floppy));
-	common::sync();
-    }	
-}
-
-#------------------------------------------------------------------------------
-sub exitInstall {
-    my ($o, $alldone) = @_;
-
-    return $o->{step} = '' if !$alldone && !$o->ask_yesorno('', 
-N("Some steps are not completed.
-
-Do you really want to quit now?"), 0);
-
-    install_steps::exitInstall($o);
-
-    $o->exit unless $alldone;
-
-    $o->ask_from_no_check(
-	{
-	 messages => formatAlaTeX(install_messages::install_completed()),
-	 interactive_help_id => 'exitInstall',
-	 ok => N("Reboot"),
-	},      
-	[
-	 if_(arch() !~ /^ppc/,
-	     { val => \ (my $_t1 = N("Generate auto install floppy")), clicked => sub {
-		   my $t = $o->ask_from_list_('', 
-N("The auto install can be fully automated if wanted,
-in that case it will take over the hard drive!!
-(this is meant for installing on another box).
-
-You may prefer to replay the installation.
-"), [ N_("Replay"), N_("Automated") ]);
-		   $t and $o->generateAutoInstFloppy($t eq 'Replay');
-	       }, advanced => 1 }),
-	 { val => \ (my $_t2 = N("Save packages selection")), clicked => sub { install_any::g_default_packages($o) }, advanced => 1 },
-	]
-	) if $alldone;
-}
-
-
-#-######################################################################################
-#- Misc Steps Functions
-#-######################################################################################
-
-1;
diff --git a/perl-install/install_steps_newt.pm b/perl-install/install_steps_newt.pm
deleted file mode 100644
index 203a1933c..000000000
--- a/perl-install/install_steps_newt.pm
+++ /dev/null
@@ -1,56 +0,0 @@
-package install_steps_newt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive::newt);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use install_steps_interactive;
-use interactive::newt;
-use install_any;
-use devices;
-use lang;
-use common;
-
-sub banner {
-    my $banner = translate(N_("Mandriva Linux Installation %s"));
-    my $l = first(Newt::GetScreenSize()) - length($banner) - length($_[0]) + 1;
-    Newt::DrawRootText(0, 0, sprintf($banner, ' ' x $l . $_[0]));
-    Newt::Refresh();
-}
-
-sub new {
-    my ($type, $o) = @_;
-
-    interactive::newt->new;
-
-    banner('');
-    Newt::PushHelpLine(
-                       #-PO: This string must fit in a 80-char wide text screen
-                       N("  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "));
-
-    (bless {}, ref($type) || $type)->SUPER::new($o);
-}
-
-sub charsetChanged {
-    my ($o) = @_;
-    lang::load_console_font($o->{locale});
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    $o->SUPER::enteringStep($step);
-    banner(translate($o->{steps}{$step}{text}));
-}
-
-sub exitInstall { 
-    &install_steps_interactive::exitInstall;
-    interactive::newt::end();
-}
-
-1;
-
diff --git a/perl-install/install_steps_stdio.pm b/perl-install/install_steps_stdio.pm
deleted file mode 100644
index ac9408b3c..000000000
--- a/perl-install/install_steps_stdio.pm
+++ /dev/null
@@ -1,36 +0,0 @@
-package install_steps_stdio; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(install_steps_interactive interactive::stdio);
-
-use common;
-use interactive::stdio;
-use install_steps_interactive;
-use lang;
-
-sub new($$) {
-    my ($type, $o) = @_;
-
-    (bless {}, ref($type) || $type)->SUPER::new($o);
-}
-
-sub charsetChanged {
-    my ($o) = @_;
-    lang::load_console_font($o->{locale});
-}
-
-sub enteringStep {
-    my ($o, $step) = @_;
-    print N("Entering step `%s'\n", translate($o->{steps}{$step}{text}));
-    $o->SUPER::enteringStep($step);
-}
-sub leavingStep {
-    my ($o, $step) = @_;
-    $o->SUPER::leavingStep($step);
-    print "--------\n";
-}
-
-1;
diff --git a/perl-install/interactive.pm b/perl-install/interactive.pm
deleted file mode 100644
index f4b95ae9d..000000000
--- a/perl-install/interactive.pm
+++ /dev/null
@@ -1,531 +0,0 @@
-package interactive; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::Func;
-use common;
-use do_pkgs;
-
-#- minimal example using interactive:
-#
-#- > use lib qw(/usr/lib/libDrakX);
-#- > use interactive;
-#- > my $in = interactive->vnew;
-#- > $in->ask_okcancel('title', 'question');
-#- > $in->exit;
-
-#- ask_from_ takes global options ($common):
-#-  title                => window title
-#-  messages             => message displayed in the upper part of the window
-#-  advanced_messages    => message displayed when "Advanced" is pressed
-#-  ok                   => force the name of the "Ok"/"Next" button
-#-  cancel               => force the name of the "Cancel"/"Previous" button
-#-  advanced_label       => force the name of the "Advanced" button
-#-  advanced_label_close => force the name of the "Basic" button
-#-  advanced_state       => if set to 1, force the "Advanced" part of the dialog to be opened initially
-#-  focus_cancel         => force focus on the "Cancel" button
-#-  focus_first          => force focus on the first entry
-#-  callbacks            => functions called when something happen: complete canceled advanced changed focus_out ok_disabled
-
-#- ask_from_ takes a list of entries with fields:
-#-  val      => reference to the value
-#-  label    => description
-#-  icon     => icon to put before the description
-#-  help     => tooltip
-#-  advanced => wether it is shown in by default or only in advanced mode
-#-  disabled => function returning wether it should be disabled (grayed)
-#-  gtk      => gtk preferences
-#-  type     => 
-#-     button => (with clicked or clicked_may_quit)
-#-               (type defaults to button if clicked or clicked_may_quit is there)
-#-               (val need not be a reference) (if clicked_may_quit return true, it's as if "Ok" was pressed)
-#-     label => (val need not be a reference) (type defaults to label if val is not a reference) 
-#-     bool (with "text" or "image" (which overrides text) giving an image filename)
-#-     range (with min, max)
-#-     combo (with list, not_edit, format)
-#-     list (with list, icon2f (aka icon), separator (aka tree), format (aka pre_format function),
-#-           help can be a hash or a function,
-#-           tree_expanded boolean telling wether the tree should be wide open by default
-#-           quit_if_double_click boolean
-#-           allow_empty_list disables the special cases for 0 and 1 element lists
-#-           image2f is a subroutine which takes a value of the list as parameter, and returns an array (text, image_file_name))
-#-     entry (the default) (with hidden)
-#
-#- heritate from this class and you'll get all made interactivity for same steps.
-#- for this you need to provide
-#- - ask_from_listW(o, title, messages, arrayref, default) returns one string of arrayref
-#-
-#- where
-#- - o is the object
-#- - title is a string
-#- - messages is an refarray of strings
-#- - default is an optional string (default is in arrayref)
-#- - arrayref is an arrayref of strings
-#- - arrayref2 contains booleans telling the default state,
-#-
-#- ask_from_list and ask_from_list_ are wrappers around ask_from_biglist and ask_from_smalllist
-#-
-#- ask_from_list_ just translate arrayref before calling ask_from_list and untranslate the result
-#-
-#- ask_from_listW should handle differently small lists and big ones.
-#-
-
-
-#-######################################################################################
-#- OO Stuff
-#-######################################################################################
-our @ISA = qw(do_pkgs);
-
-sub new($) {
-    my ($type) = @_;
-
-    bless {}, ref($type) || $type;
-}
-
-sub vnew {
-    my ($_type, $o_su, $o_icon) = @_;
-    my $su = $o_su eq "su";
-    if ($ENV{INTERACTIVE_HTTP}) {
-	require interactive::http;
-	return interactive::http->new;
-    }
-    require c;
-    if ($su) {
-	$ENV{PATH} = "/sbin:/usr/sbin:$ENV{PATH}";
-	$su = '' if $::testing || $ENV{TESTING};
-    }
-    require_root_capability() if $su;
-    if (check_for_xserver()) {
-	eval { require interactive::gtk };
-	if (!$@) {
-	    my $o = interactive::gtk->new;
-	    if ($o_icon && $o_icon ne 'default' && !$::isWizard) { $o->{icon} = $o_icon } else { undef $o->{icon} }
-	    return $o;
-	} elsif ($::testing) {
-	    die;
-	}
-    }
-
-    require 'log.pm'; #- "require log" causes some pb, perl thinking that "log" is the log() function
-    undef *log::l;
-    *log::l = sub {}; # otherwise, it will bother us :(
-    require interactive::newt;
-    interactive::newt->new;
-}
-
-sub enter_console {}
-sub leave_console {}
-sub suspend {}
-sub resume {}
-sub end {}
-sub exit {
-    if ($::isStandalone) {
-        require standalone;
-        standalone::exit($_[0]);
-    } else {
-        exit($_[0]);
-    }
-}
-
-#-######################################################################################
-#- Interactive functions
-#-######################################################################################
-sub ask_warn {
-    my ($o, $title, $message) = @_;
-    ask_warn_($o, { title => $title, messages => $message });
-}
-sub ask_yesorno {
-    my ($o, $title, $message, $b_def) = @_;
-    ask_yesorno_($o, { title => $title, messages => $message }, $b_def);
-}
-sub ask_okcancel {
-    my ($o, $title, $message, $b_def) = @_;
-    ask_okcancel_($o, { title => $title, messages => $message }, $b_def);
-}
-
-sub ask_warn_ {
-    my ($o, $common) = @_;
-    ask_from_listf_raw_no_check($o, $common, undef, [ $o->ok ]);
-}
-
-sub ask_yesorno_ {
-    my ($o, $common, $b_def) = @_;
-    $common->{cancel} = '';
-    ask_from_listf_raw($o, $common, sub { translate($_[0]) }, [ N_("Yes"), N_("No") ], $b_def ? "Yes" : "No") eq "Yes";
-}
-
-sub ask_okcancel_ {
-    my ($o, $common, $b_def) = @_;
-
-    if ($::isWizard) {
-	$::no_separator = 1;
-	$common->{focus_cancel} = !$b_def;
-    	ask_from_no_check($o, $common, []);
-    } else {
-	ask_from_listf_raw($o, $common, sub { translate($_[0]) }, [ $o->ok, $o->cancel ], $b_def ? $o->ok : "Cancel") eq $o->ok;
-    }
-}
-
-sub ask_filename {
-    my ($o, $common) = @_;
-    $common->{want_a_dir} = 0;
-    $o->ask_fileW($common);
-}
-
-sub ask_directory {
-    my ($o, $common) = @_;
-    $common->{want_a_dir} = 1;
-    $o->ask_fileW($common);
-}
-
-#- predecated
-sub ask_file {
-    my ($o, $title, $o_dir) = @_;
-    $o->ask_fileW({ title => $title, want_a_dir => 0, directory => $o_dir });
-}
-
-sub ask_fileW {
-    my ($o, $common) = @_;
-    $o->ask_from_entry($common->{title}, $common->{message} || N("Choose a file"));
-}
-
-sub ask_from_list {
-    my ($o, $title, $message, $l, $o_def) = @_;
-    ask_from_listf($o, $title, $message, undef, $l, $o_def);
-}
-
-sub ask_from_list_ {
-    my ($o, $title, $message, $l, $o_def) = @_;
-    ask_from_listf($o, $title, $message, sub { translate($_[0]) }, $l, $o_def);
-}
-
-sub ask_from_listf_ {
-    my ($o, $title, $message, $f, $l, $o_def) = @_;
-    ask_from_listf($o, $title, $message, sub { translate($f->(@_)) }, $l, $o_def);
-}
-sub ask_from_listf {
-    my ($o, $title, $message, $f, $l, $o_def) = @_;
-    ask_from_listf_raw($o, { title => $title, messages => $message }, $f, $l, $o_def);
-}
-sub ask_from_listf_raw {
-    my ($_o, $_common, $_f, $l, $_o_def) = @_;
-    @$l == 0 and die "ask_from_list: empty list\n" . backtrace();
-    @$l == 1 and return $l->[0];
-    goto &ask_from_listf_raw_no_check;
-}
-
-sub ask_from_listf_raw_no_check {
-    my ($o, $common, $f, $l, $o_def) = @_;
-
-    if (@$l <= ($::isWizard ? 1 : 2)) {
-	my ($ok, $cancel) = map { $_ && may_apply($f, $_) } @$l;
-	if (length "$ok$cancel" < 70) {
-	    my $ret = eval {
-		put_in_hash($common, { ok => $ok, 
-				       if_($cancel, cancel => $cancel, focus_cancel => $o_def eq $l->[1]) });
-		ask_from_no_check($o, $common, []) ? $l->[0] : $l->[1];
-	    };
-	    die if $@ && $@ !~ /^wizcancel/;
-	    return $@ ? undef : $ret;
-	}
-    }
-    ask_from_no_check($o, $common, [ { val => \$o_def, type => 'list', list => $l, format => $f } ]) && $o_def;
-}
-
-sub ask_from_treelist {
-    my ($o, $title, $message, $separator, $l, $o_def) = @_;
-    ask_from_treelistf($o, $title, $message, $separator, undef, $l, $o_def);
-}
-sub ask_from_treelist_ {
-    my ($o, $title, $message, $separator, $l, $o_def) = @_;
-    my $transl = sub { join '|', map { translate($_) } split(quotemeta($separator), $_[0]) }; 
-    ask_from_treelistf($o, $title, $message, $separator, $transl, $l, $o_def);
-}
-sub ask_from_treelistf {
-    my ($o, $title, $message, $separator, $f, $l, $o_def) = @_;
-    ask_from($o, $title, $message, [ { val => \$o_def, separator => $separator, list => $l, format => $f, sort => 1 } ]) or return;
-    $o_def;
-}
-
-sub ask_many_from_list {
-    my ($o, $title, $message, @l) = @_;
-    @l = grep { @{$_->{list}} } @l or return '';
-    foreach my $h (@l) {
-	$h->{e}{$_} = {
-	    text => may_apply($h->{label}, $_),
-	    val => $h->{val} ? $h->{val}->($_) : do {
-		my $i =
-		  $h->{value} ? $h->{value}->($_) : 
-		    $h->{values} ? member($_, @{$h->{values}}) : 0;
-		\$i;
-	    },
-	    type => 'bool',
-	    help => may_apply($h->{help}, $_, ''),
-	    icon => may_apply($h->{icon2f}, $_, ''),
-	} foreach @{$h->{list}};
-	if ($h->{sort}) {
-	    $h->{list} = [ sort { $h->{e}{$a}{text} cmp $h->{e}{$b}{text} } @{$h->{list}} ];
-	}
-    }
-    $o->ask_from($title, $message, [ map { my $h = $_; map { $h->{e}{$_} } @{$h->{list}} } @l ]) or return;
-
-    @l = map {
-	my $h = $_;
-	[ grep { ${$h->{e}{$_}{val}} } @{$h->{list}} ];
-    } @l;
-    wantarray() ? @l : $l[0];
-}
-
-sub ask_from_entry {
-    my ($o, $title, $message, %callback) = @_;
-    first(ask_from_entries($o, $title, $message, [''], %callback));
-}
-sub ask_from_entries {
-    my ($o, $title, $message, $l, %callback) = @_;
-
-    my @l = map { my $i = ''; { label => $_, val => \$i } } @$l;
-
-    $o->ask_from_({ title => $title, messages => $message, callbacks => \%callback, 
-		    focus_first => 1 }, \@l) or return;
-    map { ${$_->{val}} } @l;
-}
-
-sub ask_from__add_modify_remove {
-    my ($o, $title, $message, $l, %callback) = @_;
-    die "ask_from__add_modify_remove only handles one item" if @$l != 1;
-
-    $callback{$_} or internal_error("missing callback $_") foreach qw(Add Modify Remove);
-
-    if ($o->can('ask_from__add_modify_removeW')) {
-	$o->ask_from__add_modify_removeW($title, $message, $l, %callback);
-    } else {
-	my $e = $l->[0];
-	my $chosen_element;
-	put_in_hash($e, { allow_empty_list => 1, val => \$chosen_element, type => 'list' });
-
-	while (1) {
-	    my $continue;
-	    my @l = (@$l, 
-		     map { my $s = $_; { val => translate($_), clicked_may_quit => sub { 
-					     my $r = $callback{$s}->($chosen_element);
-					     defined $r or return;
-					     $continue = 1;
-					 } } }
-		     N_("Add"), if_(@{$e->{list}} > 0, N_("Modify"), N_("Remove")));
-	    $o->ask_from_({ title => $title, messages => $message, callbacks => \%callback }, \@l) or return;
-	    return 1 if !$continue;
-	}
-    }
-}
-
-
-#- can get a hash of callback: focus_out changed and complete
-#- moreove if you pass a hash with a field list -> combo
-#- if you pass a hash with a field hidden -> emulate stty -echo
-sub ask_from {
-    my ($o, $title, $message, $l, %callback) = @_;
-    ask_from_($o, { title => $title, messages => $message, callbacks => \%callback }, $l);
-}
-
-
-sub ask_from_normalize {
-    my ($o, $common, $l) = @_;
-
-    ref($l) eq 'ARRAY' or internal_error('ask_from_normalize');
-    foreach my $e (@$l) {
-	if (my $li = $e->{list}) {
-	    ref($e->{val}) =~ /SCALAR|REF/ or internal_error($e->{val} ? "field {val} must be a reference (it is $e->{val})" : "field {val} is mandatory"); #-#
-	    if ($e->{sort} || @$li > 10 && !exists $e->{sort}) {
-		my @l2 = map { may_apply($e->{format}, $_) } @$li;
-		my @places = sort { $l2[$a] cmp $l2[$b] } 0 .. $#l2;
-		$e->{list} = $li = [ map { $li->[$_] } @places ];
-	    }
-	    $e->{type} = 'iconlist' if $e->{icon2f};
-	    $e->{type} = 'treelist' if $e->{separator};
-	    add2hash_($e, { not_edit => 1 });
-	    $e->{type} ||= 'combo';
-
-	    if (!$e->{not_edit}) {
-		die q(when using "not_edit" you must use strings, not a data structure) if ref(${$e->{val}}) || any { ref $_ } @$li;
-	    }
-	    if ($e->{type} ne 'combo' || $e->{not_edit}) {
-		${$e->{val}} = $li->[0] if !member(may_apply($e->{format}, ${$e->{val}}), map { may_apply($e->{format}, $_) } @$li);
-	    }
-	} elsif ($e->{type} eq 'range') {
-	    $e->{min} <= $e->{max} or die "bad range min $e->{min} > max $e->{max} (called from " . join(':', caller()) . ")";
-	    ${$e->{val}} = max($e->{min}, min(${$e->{val}}, $e->{max}));
-	} elsif ($e->{type} eq 'button' || $e->{clicked} || $e->{clicked_may_quit}) {
-	    $e->{type} = 'button';
-	    $e->{clicked_may_quit} ||= $e->{clicked} ? sub { $e->{clicked}(); 0 } : sub {};	    
-	    $e->{val} = \ (my $_v = $e->{val}) if !ref($e->{val});
-	} elsif ($e->{type} eq 'label' || !ref($e->{val})) {
-	    $e->{type} = 'label';
-	    $e->{val} = \ (my $_v = $e->{val}) if !ref($e->{val});
-	} else {
-	    $e->{type} ||= 'entry';
-	}
-	$e->{disabled} ||= sub { 0 };
-    }
-
-    #- do not display empty lists and one element lists
-    @$l = grep { 
-	if ($_->{list} && $_->{not_edit} && !$_->{allow_empty_list}) {
-	    if (!@{$_->{list}}) {
-		eval {
-		    require 'log.pm'; #- "require log" causes some pb, perl thinking that "log" is the log() function
-		    log::l("ask_from_normalize: empty list for $_->{label}\n" . backtrace());
-		};
-	    }
-	    @{$_->{list}} > 1;
-	} else {
-	    1;
-	}
-    } @$l;
-
-    if (!$common->{title} && $::isStandalone) {
-	($common->{title} = $0) =~ s|.*/||;
-    }
-    $common->{interactive_help} ||= $o->{interactive_help};
-    $common->{interactive_help} ||= $common->{interactive_help_id} && $o->interactive_help_sub_get_id($common->{interactive_help_id});
-    $common->{advanced_label} ||= N("Advanced");
-    $common->{advanced_label_close} ||= N("Basic");
-    $common->{$_} = $common->{$_} ? [ deref($common->{$_}) ] : [] foreach qw(messages advanced_messages);
-    add2hash_($common->{callbacks} ||= {}, { changed => sub {}, focus_out => sub {}, complete => sub { 0 }, canceled => sub { 0 }, advanced => sub {} });
-}
-
-sub ask_from_ {
-    my ($o, $common, $l) = @_;
-    ask_from_normalize($o, $common, $l);
-    @$l or return 1;
-    $common->{cancel} = '' if !defined wantarray();
-    ask_from_real($o, $common, $l);
-}
-sub ask_from_no_check {
-    my ($o, $common, $l) = @_;
-    ask_from_normalize($o, $common, $l);
-    $common->{cancel} = '' if !defined wantarray();
-    my ($l1, $l2) = partition { !$_->{advanced} } @$l;
-    $o->ask_fromW($common, $l1, $l2);
-}
-sub ask_from_real {
-    my ($o, $common, $l) = @_;
-    my ($l1, $l2) = partition { !$_->{advanced} } @$l;
-    my $v = $o->ask_fromW($common, $l1, $l2);
-
-    foreach my $e (@$l1, @$l2) {
-	if ($e->{type} eq 'range') {
-	    ${$e->{val}} = max($e->{min}, min(${$e->{val}}, $e->{max}));
-	}
-    }
-
-    %$common = ();
-    $v;
-}
-
-
-sub ask_browse_tree_info {
-    my ($o, $title, $message, $common) = @_;
-    $common->{interactive_help} ||= $common->{interactive_help_id} && $o->interactive_help_sub_get_id($common->{interactive_help_id});
-    add2hash_($common, { ok => $::isWizard ? ($::Wizard_finished ? N("Finish") : N("Next")) : N("Ok"), 
-			 cancel => $::isWizard ? N("Previous") : N("Cancel") });
-    add2hash_($common, { title => $title, message => $message });
-    add2hash_($common, { grep_allowed_to_toggle      => sub { @_ },
-			 grep_unselected             => sub { grep { $common->{node_state}($_) eq 'unselected' } @_ },
-			 check_interactive_to_toggle => sub { 1 },
-			 toggle_nodes                => sub {
-			     my ($set_state, @nodes) = @_;
-			     my $new_state = !$common->{grep_unselected}($nodes[0]) ? 'selected' : 'unselected';
-			     $set_state->($_, $new_state) foreach @nodes;
-			 },
-		       });
-    $o->ask_browse_tree_info_refW($common);
-}
-sub ask_browse_tree_info_refW { #- default definition, do not use with too many items (memory consuming)
-    my ($o, $common) = @_;
-    my ($l, $v, $h) = ([], [], {});
-    $common->{build_tree}(sub {
-			      my ($node) = $common->{grep_allowed_to_toggle}(@_);
-			      if (my $state = $node && $common->{node_state}($node)) {
-				  push @$l, $node;
-				  $state eq 'selected' and push @$v, $node;
-				  $h->{$node} = $state eq 'selected';
-			      }
-			  }, 'flat');
-    add2hash_($common, { list   => $l, #- TODO interactivity of toggle is missing
-			 values => $v,
-			 help   => sub { $common->{get_info}($_[0]) },
-		       });
-    my ($new_v) = $o->ask_many_from_list($common->{title}, $common->{message}, $common) or return;
-    $common->{toggle_nodes}(sub {}, grep { ! delete $h->{$_} } @$new_v);
-    $common->{toggle_nodes}(sub {}, grep { $h->{$_} } keys %$h);
-    1;
-}
-
-sub wait_message {
-    my ($o, $title, $message, $b_temp) = @_;
-
-    my $w = $o->wait_messageW($title, [ N("Please wait"), deref($message) ]);
-    push @tempory::objects, $w if $b_temp;
-    my $b = before_leaving { $o->wait_message_endW($w) };
-
-    #- enable access through set
-    MDK::Common::Func::add_f4before_leaving(sub { $o->wait_message_nextW([ deref($_[1]) ], $w) }, $b, 'set');
-    $b;
-}
-
-sub kill() {}
-
-
-
-sub helper_separator_tree_to_tree {
-    my ($separator, $list, $formatted_list) = @_;
-    my $sep = quotemeta $separator;
-    my $tree = {};
-    
-    each_index {
-	my @l = split $sep;
-	my $leaf = pop @l;
-	my $node = $tree;
-	foreach (@l) {
-	    $node = $node->{$_} ||= do {
-		my $r = {};
-		push @{$node->{_order_}}, $_;
-		$r;
-	    };
-	}
-	push @{$node->{_leaves_}}, [ $leaf, $list->[$::i] ];
-	();
-    } @$formatted_list;
-
-    $tree;
-}
-
-
-sub interactive_help_has_id {
-    my ($_o, $id) = @_;
-    exists $help::{$id};
-}
-
-sub interactive_help_get_id {
-    my ($_o, @l) = @_;
-    @l = map { 
-	join("\n\n", map { s/\n/ /mg; $_ } split("\n\n", translate($help::{$_}->())));
-    } grep { exists $help::{$_} } @l;
-    join("\n\n\n", @l);
-}
-
-sub interactive_help_sub_get_id {
-    my ($o, $id) = @_;
-    $o->interactive_help_has_id($id) && sub { $o->interactive_help_get_id($id) };
-}
-
-sub interactive_help_sub_display_id {
-    my ($o, $id) = @_;
-    $o->interactive_help_has_id($id) && sub { $o->ask_warn(N("Help"), $o->interactive_help_get_id($id)) };
-}
-
-1;
diff --git a/perl-install/interactive/gtk.pm b/perl-install/interactive/gtk.pm
deleted file mode 100644
index b62696eb9..000000000
--- a/perl-install/interactive/gtk.pm
+++ /dev/null
@@ -1,774 +0,0 @@
-package interactive::gtk; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(interactive);
-
-use interactive;
-use common;
-use mygtk2;
-use ugtk2 qw(:helpers :wrappers :create);
-use Gtk2::Gdk::Keysyms;
-
-my $forgetTime = 1000; #- in milli-seconds
-
-sub new {
-    ($::windowwidth, $::windowheight) = gtkroot()->get_size if !$::isInstall;
-    goto &interactive::new;
-}
-sub enter_console { my ($o) = @_; $o->{suspended} = common::setVirtual(1) }
-sub leave_console { my ($o) = @_; common::setVirtual(delete $o->{suspended}) }
-
-sub exit { ugtk2::exit(@_) }
-
-sub ask_fileW {
-    my ($in, $common) = @_;
-
-    my $w = ugtk2::create_file_selector(%$common);
-
-    my $file;
-    $w->main(sub { 
-	$file = $w->{chooser}->get_filename;
-	my $err = ugtk2::file_selected_check($common->{save}, $common->{want_a_dir}, $file);
-	$err and $in->ask_warn('', $err);
-	!$err;
-    }) && $file;
-}
-
-sub create_boxradio {
-    my ($e, $may_go_to_next, $changed, $double_click) = @_;
-
-    my $boxradio = gtkshow(gtkpack2__(Gtk2::VBox->new(0, 0),
-                                      my @radios = gtkradio('', @{$e->{formatted_list}})));
-    my $tips = Gtk2::Tooltips->new;
-    mapn {
-	my ($txt, $w) = @_;
-	$w->signal_connect(button_press_event => $double_click) if $double_click;
-
-	$w->signal_connect(key_press_event => sub {
-	    &$may_go_to_next;
-	});
-	$w->signal_connect(clicked => sub {
- 	    ${$e->{val}} = $txt;
-	    &$changed;
-        });
-	if ($e->{help}) {
-	    gtkset_tip($tips, $w,
-		       ref($e->{help}) eq 'HASH' ? $e->{help}{$txt} :
-		       ref($e->{help}) eq 'CODE' ? $e->{help}($txt) : $e->{help});
-	}
-    } $e->{list}, \@radios;
-
-    $boxradio, sub {
-	my ($v, $full_struct) = @_;
-	mapn { 
-	    $_[0]->set_active($_[1] eq $v);
-	    $full_struct->{focus_w} = $_[0] if $_[1] eq $v;
-	} \@radios, $e->{list};
-    }, $radios[0];
-}
-
-sub create_treeview_list {
-    my ($e, $may_go_to_next, $changed, $double_click) = @_;
-    my $curr;
-
-    my $list = Gtk2::ListStore->new("Glib::String");
-    my $list_tv = Gtk2::TreeView->new_with_model($list);
-    $list_tv->set_headers_visible(0);
-    $list_tv->get_selection->set_mode('browse');
-    my $textcolumn = Gtk2::TreeViewColumn->new_with_attributes(undef, Gtk2::CellRendererText->new, 'text' => 0);
-    $list_tv->append_column($textcolumn);
-    
-    my $select = sub {
-	$list_tv->set_cursor($_[0], undef, 0);
-    	$list_tv->scroll_to_cell($_[0], undef, 1, 0.5, 0);
-    };
-
-    my ($starting_word, $start_reg) = ('', '^');
-    my $timeout;
-    $list_tv->set_enable_search(0);
-    $list_tv->signal_connect(key_press_event => sub {
-        my ($_w, $event) = @_;
-	my $c = chr($event->keyval & 0xff);
-
-	Glib::Source->remove($timeout) if $timeout; $timeout = '';
-	
-	if ($event->keyval >= 0x100) {
-	    &$may_go_to_next if member($event->keyval, ($Gtk2::Gdk::Keysyms{Return}, $Gtk2::Gdk::Keysyms{KP_Enter}));
-	    $starting_word = '' if !member($event->keyval, ($Gtk2::Gdk::Keysyms{Control_L}, $Gtk2::Gdk::Keysyms{Control_R}));
-	} else {
-	    if (member('control-mask', @{$event->state})) {
-		$c eq 's' or return 1;
-		$start_reg and $start_reg = '', return 1;
-		$curr++;
-	    } else {
-		&$may_go_to_next if $c eq ' ';
-
-		$curr++ if $starting_word eq '' || $starting_word eq $c;
-		$starting_word .= $c unless $starting_word eq $c;
-	    }
-	    my @l = @{$e->{formatted_list}};
-	    my $word = quotemeta $starting_word;
-	    my $j; for ($j = 0; $j < @l; $j++) {
-		 $l[($j + $curr) % @l] =~ /$start_reg$word/i and last;
-	    }
-	    if ($j == @l) {
-		$starting_word = '';
-	    } else {
-		$select->(Gtk2::TreePath->new_from_string(($j + $curr) % @l));
-	    }
-
-	    $timeout = Glib::Timeout->add($forgetTime, sub { $timeout = $starting_word = ''; 0 });
-	}
-	0;
-    });
-    $list_tv->show;
-
-    $list->append_set([ 0 => $_ ]) foreach @{$e->{formatted_list}};
-
-    $list_tv->get_selection->signal_connect(changed => sub {
-	my ($model, $iter) = $_[0]->get_selected;
-	$model && $iter or return;
-	my $row = $model->get_path_str($iter);
-	${$e->{val}} = $e->{list}[$curr = $row];
-	&$changed;
-    });
-    $list_tv->signal_connect(button_press_event => $double_click) if $double_click;
-
-    $list_tv, sub {
-	my ($v) = @_;
-	eval {
-	    my $nb = find_index { $_ eq $v } @{$e->{list}};
-	    my ($old_path) = $list_tv->get_cursor;
-	    if (!$old_path || $nb != $old_path->to_string) {
-		$select->(Gtk2::TreePath->new_from_string($nb));
-	    }
-	    undef $old_path if $old_path;
-	};
-    };
-}
-
-sub create_treeview_tree {
-    my ($e, $may_go_to_next, $changed, $double_click, $tree_expanded) = @_;
-
-    $tree_expanded = to_bool($tree_expanded); #- to reduce "Use of uninitialized value", especially when debugging
-
-    my $sep = quotemeta $e->{separator};
-    my $tree_model = Gtk2::TreeStore->new("Glib::String", "Gtk2::Gdk::Pixbuf", "Glib::String");
-    my $tree = Gtk2::TreeView->new_with_model($tree_model);
-    $tree->get_selection->set_mode('browse');
-    $tree->append_column(Gtk2::TreeViewColumn->new_with_attributes(undef, Gtk2::CellRendererText->new, 'text' => 0));
-    $tree->append_column(Gtk2::TreeViewColumn->new_with_attributes(undef, Gtk2::CellRendererPixbuf->new, 'pixbuf' => 1));
-    $tree->append_column(Gtk2::TreeViewColumn->new_with_attributes(undef, Gtk2::CellRendererText->new, 'text' => 2));
-    $tree->set_headers_visible(0);
-
-    my ($build_value, $clean_image);
-    if (exists $e->{image2f}) {
-	my $to_unref;
-	$build_value = sub {
-	    my ($text, $image) = $e->{image2f}->($_[0]);
-	    [ $text  ? (0 => $text) : @{[]},
-	      $image ? (1 => $to_unref = gtkcreate_pixbuf($image)) : @{[]} ];
-	};
-	$clean_image = sub { undef $to_unref };
-    } else {
-	$build_value = sub { [ 0 => $_[0] ] };
-	$clean_image = sub {};
-    }
-
-    my (%wtree, %wleaves, $size, $selected_via_click);
-    my $parent; $parent = sub {
-	if (my $w = $wtree{"$_[0]$e->{separator}"}) { return $w }
-	my $s = '';
-	foreach (split $sep, $_[0]) {
-	    $wtree{"$s$_$e->{separator}"} ||= 
-	      $tree_model->append_set($s ? $parent->($s) : undef, $build_value->($_));
-	    $clean_image->();
-	    $size++ if !$s;
-	    $s .= "$_$e->{separator}";
-	}
-	$wtree{$s};
-    };
-
-    #- do some precomputing to not slowdown selection change and key press
-    my (%precomp, @ordered_keys);
-    mapn {
-	my ($root, $leaf) = $_[0] =~ /(.*)$sep(.+)/ ? ($1, $2) : ('', $_[0]);
-	my $iter = $tree_model->append_set($parent->($root), $build_value->($leaf));
-	$clean_image->();
-	my $pathstr = $tree_model->get_path_str($iter);
-	$precomp{$pathstr} = { value => $leaf, fullvalue => $_[0], listvalue => $_[1] };
-	push @ordered_keys, $pathstr;
-	$wleaves{$_[0]} = $pathstr;
-    } $e->{formatted_list}, $e->{list};
-    undef $_ foreach values %wtree;
-    undef %wtree;
-
-    my $select = sub {
-	my ($path_str) = @_;
-	$tree->expand_to_path(Gtk2::TreePath->new_from_string($path_str));
-	my $path = Gtk2::TreePath->new_from_string($path_str);
-	$tree->set_cursor($path, undef, 0);
-        gtkflush();  #- workaround gtk2 bug not honouring centering on the given row if node was closed
-	$tree->scroll_to_cell($path, undef, 1, 0.5, 0);
-    };
-
-    my $curr = $tree_model->get_iter_first; #- default value
-    $tree->expand_all if $tree_expanded;
-
-    $tree->get_selection->signal_connect(changed => sub {
-	my ($model, $iter) = $_[0]->get_selected;
-	$model && $iter or return;
-	undef $curr if ref $curr;
-	my $path = $tree_model->get_path($curr = $iter);
-	if (!$tree_model->iter_has_child($iter)) {
-	    ${$e->{val}} = $precomp{$path->to_string}{listvalue};
-	    &$changed;
-	} else {
-	    $tree->expand_row($path, 0) if $selected_via_click;
-	}
-    });
-    my ($starting_word, $start_reg) = ('', "^");
-    my $timeout;
-
-    my $toggle = sub {
-	if ($tree_model->iter_has_child($curr)) {
-	    $tree->toggle_expansion($tree_model->get_path($curr), 0);
-
-	} else {
-	    &$may_go_to_next;
-	}
-    };
-
-    $tree->set_enable_search(0);
-    $tree->signal_connect(key_press_event => sub {
-        my ($_w, $event) = @_;
-	$selected_via_click = 0;
-	my $c = chr($event->keyval & 0xff);
-	$curr or return 0;
-	Glib::Source->remove($timeout) if $timeout; $timeout = '';
-
-	if ($event->keyval >= 0x100) {
-	    &$toggle if member($event->keyval, ($Gtk2::Gdk::Keysyms{Return}, $Gtk2::Gdk::Keysyms{KP_Enter}));
-	    $starting_word = '' if !member($event->keyval, ($Gtk2::Gdk::Keysyms{Control_L}, $Gtk2::Gdk::Keysyms{Control_R}));
-	} else {
-	    my $next;
-	    if (member('control-mask', @{$event->state})) {
-		$c eq "s" or return 1;
-		$start_reg and $start_reg = '', return 0;
-		$next = 1;
-	    } else {
-		&$toggle if $c eq ' ';
-		$next = 1 if $starting_word eq '' || $starting_word eq $c;
-		$starting_word .= $c unless $starting_word eq $c;
-	    }
-	    my $word = quotemeta $starting_word;
-	    my ($after, $best);
-
-	    my $currpath = $tree_model->get_path_str($curr);
-	    foreach my $v (@ordered_keys) { 
-		$next &&= !$after;
-		$after ||= $v eq $currpath;
-		if ($precomp{$v}{value} =~ /$start_reg$word/i) {
-		    if ($after && !$next) {
-			($best, $after) = ($v, 0);
-		    } else {
-			$best ||= $v;
-		    }
-		}
-	    }
-
-	    if (defined $best) {
-		$select->($best);
-	    } else {
-		$starting_word = '';
-	    }
-
-	    $timeout = Glib::Timeout->add($forgetTime, sub { $timeout = $starting_word = ''; 0 });
-	}
-	0;
-    });
-    $tree->signal_connect(button_press_event => sub {
-	$selected_via_click = 1;
-	&$double_click if $curr && !$tree_model->iter_has_child($curr) && $double_click;
-    });
-
-    $tree, sub {
-	my $v = may_apply($e->{format}, $_[0]);
-	my ($model, $iter) = $tree->get_selection->get_selected;
-	$select->($wleaves{$v} || return) if !$model || $wleaves{$v} ne $model->get_path_str($iter);
-	undef $iter if ref $iter;
-    };
-}
-
-sub create_list {
-    my ($e, $may_go_to_next, $changed, $double_click) = @_;
-    my $l = $e->{list};
-    my $list = Gtk2::List->new;
-    $list->set_selection_mode('browse');
-
-    my $select = sub {
-	$list->select_item($_[0]);
-    };
-
-    my $tips = Gtk2::Tooltips->new;
-    each_index {
-	my $item = Gtk2::ListItem->new(may_apply($e->{format}, $_));
-	$item->signal_connect(key_press_event => sub {
-    	    my ($_w, $event) = @_;
-    	    my $c = chr($event->keyval & 0xff);
-	    &$may_go_to_next if $event->keyval < 0x100 ? $c eq ' ' : $c eq "\r" || $c eq "\x8d";
-    	    0;
-    	});
-	$list->append_items(gtkshow($item));
-	if ($e->{help}) {
-	    gtkset_tip($tips, $item,
-		       ref($e->{help}) eq 'HASH' ? $e->{help}{$_} :
-		       ref($e->{help}) eq 'CODE' ? $e->{help}($_) : $e->{help});
-	}
-	$item->grab_focus if ${$e->{val}} && $_ eq ${$e->{val}};
-    } @$l;
-
-    #- signal_connect'ed after append_items otherwise it is called and destroys the default value
-    $list->signal_connect(select_child => sub {
-	my ($_w, $row) = @_;
-	${$e->{val}} = $l->[$list->child_position($row)];
-	&$changed;
-    });
-    $list->signal_connect(button_press_event => $double_click) if $double_click;
-
-    $list, sub { 
-	my ($v) = @_;
-	eval { 
-	    $select->(find_index { $_ eq $v } @$l);
-	};
-    };
-}
-
-#- $actions is a ref list of $action
-#- $action is a { kind => $kind, action => sub { ... }, button => Gtk2::Button->new(...) }
-#-   where $kind is one of '', 'modify', 'remove', 'add'
-sub add_modify_remove_action {
-    my ($button, $buttons, $e, $treelist) = @_;
-
-    if (member($button->{kind}, 'modify', 'remove')) {
-	@{$e->{list}} or return;
-    }
-    my $r = $button->{action}->(${$e->{val}});
-    defined $r or return;
-    
-    if ($button->{kind} eq 'add') {
-	${$e->{val}} = $r;
-    } elsif ($button->{kind} eq 'remove') {
-	${$e->{val}} = $e->{list}[0];
-    }
-    ugtk2::gtk_set_treelist($treelist, [ map { may_apply($e->{format}, $_) } @{$e->{list}} ]);
-
-    add_modify_remove_sensitive($buttons, $e);
-    1;
-}
-
-sub add_modify_remove_sensitive {
-    my ($buttons, $e) = @_;
-    $_->{button}->set_sensitive(@{$e->{list}} != ()) foreach 
-      grep { member($_->{kind}, 'modify', 'remove') } @$buttons;
-}
-
-sub ask_fromW {
-    my ($o, $common, $l, $l2) = @_;
-    my $ignore = 0; #-to handle recursivity
-
-    my $mainw = ugtk2->new($common->{title}, %$o, modal => 1, if__($::main_window, transient => $::main_window));
- 
-    #-the widgets
-    my (@widgets, @widgets_always, @widgets_advanced, $advanced);
-    my $tooltips = Gtk2::Tooltips->new;
-    my $ok_clicked = sub { 
-	!$mainw->{ok} || $mainw->{ok}->get_property('sensitive') or return;
-	$mainw->{retval} = 1;
-	Gtk2->main_quit;
-    };
-    my $set_all = sub {
-	$ignore = 1;
-	$_->{set}->(${$_->{e}{val}}, $_) foreach @widgets_always, @widgets_advanced;
-	$_->{real_w}->set_sensitive(!$_->{e}{disabled}()) foreach @widgets_always, @widgets_advanced;
-	$mainw->{ok}->set_sensitive(!$common->{callbacks}{ok_disabled}()) if $common->{callbacks}{ok_disabled};
-	$ignore = 0;
-    };
-    my $get_all = sub {
-	${$_->{e}{val}} = $_->{get}->() foreach @widgets_always, @widgets_advanced;
-    };
-    my $update = sub {
-	my ($f) = @_;
-	return if $ignore;
-	$get_all->();
-	$f->();
-	$set_all->();
-    };
-
-    my @label_sizegrp = map { Gtk2::SizeGroup->new('horizontal') } 0 .. 1;
-    my @realw_sizegrp = map { Gtk2::SizeGroup->new('horizontal') } 0 .. 1;
-
-    my $create_widget = sub {
-	my ($e, $ind) = @_;
-
-	my $may_go_to_next = sub {
-	    my (undef, $event) = @_;
-	    if (!$event || ($event->keyval & 0x7f) == 0xd) {
-		if ($ind == $#widgets) {
-		    @widgets == 1 ? $ok_clicked->() : $mainw->{ok}->grab_focus;
-		} else {
-		    $widgets[$ind+1]{focus_w}->grab_focus;
-		}
-		return 1;  #- prevent an action on the just grabbed focus
-	    }
-	};
-	my $changed = sub { $update->(sub { $common->{callbacks}{changed}($ind) }) };
-
-	my ($w, $real_w, $focus_w, $set, $get, $grow);
-	if ($e->{type} eq 'iconlist') {
-	    $w = Gtk2::Button->new;
-	    $set = sub {
-		gtkdestroy($e->{icon});
-		my $f = $e->{icon2f}->($_[0]);
-		$e->{icon} = -e $f ?
-		    gtkcreate_img($f) :
-		    Gtk2::WrappedLabel->new(may_apply($e->{format}, $_[0]));
-		$w->add(gtkshow($e->{icon}));
-	    };
-	    $w->signal_connect(clicked => sub {
-		$set->(${$e->{val}} = next_val_in_array(${$e->{val}}, $e->{list}));
-		$changed->();
-	    });
-	    $real_w = gtkpack_(Gtk2::HBox->new(0,10), 1, Gtk2::HBox->new(0,0), 0, $w, 1, Gtk2::HBox->new(0,0));
-	} elsif ($e->{type} eq 'bool') {
-	    if ($e->{image}) {
-		$w = ugtk2::gtkadd(Gtk2::CheckButton->new, gtkshow(gtkcreate_img($e->{image})));
-	    } else {
-#-		warn "\"text\" member should have been used instead of \"label\" one at:\n", common::backtrace(), "\n" if $e->{label} && !$e->{text};
-		$w = Gtk2::CheckButton->new_with_label($e->{text});
-	    }
-	    $w->signal_connect(clicked => $changed);
-	    $set = sub { $w->set_active($_[0]) };
-	    $get = sub { $w->get_active };
-	} elsif ($e->{type} eq 'label') {
-	    $w = Gtk2::WrappedLabel->new(${$e->{val}});
-	    $set = sub { $w->set($_[0]) };
-	} elsif ($e->{type} eq 'button') {
-	    $w = Gtk2::Button->new_with_label('');
-	    $w->signal_connect(clicked => sub {
-		$get_all->();
-		$mainw->{rwindow}->hide;
-		if (my $v = $e->{clicked_may_quit}()) {
-		    $mainw->{retval} = $v;
-		    Gtk2->main_quit;
-		}
-		$mainw->{rwindow}->show;
-		$set_all->();
-	    });
-	    $set = sub { $w->child->set_label(may_apply($e->{format}, $_[0])) };
-	} elsif ($e->{type} eq 'range') {
-	    my $want_scale = !$::expert;
-	    my $adj = Gtk2::Adjustment->new(${$e->{val}}, $e->{min}, $e->{max} + ($want_scale ? 1 : 0), 1, ($e->{max} - $e->{min}) / 10, 1);
-	    $adj->signal_connect(value_changed => $changed);
-	    $w = $want_scale ? Gtk2::HScale->new($adj) : Gtk2::SpinButton->new($adj, 10, 0);
-	    $w->set_size_request($want_scale ? 200 : 100, -1);
-	    $w->set_digits(0);
-	    $w->signal_connect(key_press_event => $may_go_to_next);
-	    $set = sub { $adj->set_value($_[0]) };
-	    $get = sub { $adj->get_value };
-	} elsif ($e->{type} =~ /list/) {
-
-	    $e->{formatted_list} = [ map { may_apply($e->{format}, $_) } @{$e->{list}} ];
-
-	    if (my $actions = $e->{add_modify_remove}) {
-		my @buttons = map {
-		    { kind => lc $_, action => $actions->{$_}, button => Gtk2::Button->new(translate($_)) };
-		} N_("Add"), N_("Modify"), N_("Remove");
-		my $modify = find { $_->{kind} eq 'modify' } @buttons;
-
-		my $do_action = sub {
-		    my ($button) = @_;
-		    add_modify_remove_action($button, \@buttons, $e, $w) and $changed->();
-		};
-
-		($w, $set, $focus_w) = create_treeview_list($e, $may_go_to_next, $changed, 
-							    sub { $do_action->($modify) if $_[1]->type =~ /^2/ });
-		$e->{saved_default_val} = ${$e->{val}};
-
-		foreach my $button (@buttons) {
-		    $button->{button}->signal_connect(clicked => sub { $do_action->($button) });
-		}
-		add_modify_remove_sensitive(\@buttons, $e);
-
-		$real_w = gtkpack_(Gtk2::HBox->new(0,0),
-				   1, create_scrolled_window($w), 
-				   0, gtkpack__(Gtk2::VBox->new(0,0), map { $_->{button} } @buttons));
-		$grow = 1;
-	    } else {
-
-		my $quit_if_double_click = 
-		  #- i'm the only one, double click means accepting
-		  @$l == 1 || $e->{quit_if_double_click} ? 
-		    sub { $_[1]->type =~ /^2/ && $ok_clicked->() } : ''; 
-
-		my @para = ($e, $may_go_to_next, $changed, $quit_if_double_click);
-		my $use_boxradio = exists $e->{gtk}{use_boxradio} ? $e->{gtk}{use_boxradio} : @{$e->{list}} <= 8;
-
-		if ($e->{help}) {
-		    #- used only when needed, as key bindings are dropped by List (ListStore does not seems to accepts Tooltips).
-		    ($w, $set, $focus_w) = $use_boxradio ? create_boxradio(@para) : create_list(@para);
-		} elsif ($e->{type} eq 'treelist') {
-		    ($w, $set) = create_treeview_tree(@para, $e->{tree_expanded});
-		    $e->{saved_default_val} = ${$e->{val}}; #- during realization, signals will mess up the default val :(
-		} else {
-		    if ($use_boxradio) {
-			($w, $set, $focus_w) = create_boxradio(@para);
-		    } else {
-			($w, $set, $focus_w) = create_treeview_list(@para);
-			$e->{saved_default_val} = ${$e->{val}};
-		    }
-		}
-		if (@{$e->{list}} > 10) {
-		    $real_w = create_scrolled_window($w);
-		    $grow = 1;
-		}
-	    }
-	} else {
-	    if ($e->{type} eq "combo") {
-
-		my @formatted_list = map { may_apply($e->{format}, $_) } @{$e->{list}};
-
-		my @l = sort { $b <=> $a } map { length } @formatted_list;
-		my $width = $l[@l / 16]; # take the third octile (think quartile)
-
-		if ($e->{not_edit} && $width < 160) { #- ComboBoxes do not have an horizontal scroll-bar. This can cause havoc for long strings (eg: diskdrake Create dialog box in expert mode)
-		    $w = Gtk2::ComboBox->new_text;
-		} else {
-		    $w = Gtk2::Combo->new;
-		    $w->set_use_arrows_always(1);
-		    $w->entry->set_editable(!$e->{not_edit});
-		    $w->disable_activate;
-		}
-
-		$w->set_popdown_strings(@formatted_list);
-		$w->set_text(ref($e->{val}) ? may_apply($e->{format}, ${$e->{val}}) : $formatted_list[0]) if $w->isa('Gtk2::ComboBox');
-		($real_w, $w) = ($w, $w->entry);
-
-		#- FIXME workaround gtk suckiness (set_text generates two 'change' signals, one when removing the whole, one for inserting the replacement..)
-		my $idle;
-		$w->signal_connect(changed => sub {
-		    $idle ||= Glib::Idle->add(sub { undef $idle; $changed->(); 0 });
-		});
-
-		$set = sub {
-		    my $s = may_apply($e->{format}, $_[0]);
-		    $w->set_text($s) if $s ne $w->get_text && $_[0] ne $w->get_text;
-		};
-		$get = sub { 
-		    my $s = $w->get_text;
-		    my $i = eval { find_index { $s eq $_ } @formatted_list };
-		    defined $i ? $e->{list}[$i] : $s;
-		};
-	    } else {
-                $w = Gtk2::Entry->new;
-		$w->signal_connect(changed => $changed);
-		$w->signal_connect(focus_in_event => sub { $w->select_region(0, -1) });
-		$w->signal_connect(focus_out_event => sub { $w->select_region(0, 0) });
-		$set = sub { $w->set_text($_[0]) if $_[0] ne $w->get_text };
-		$get = sub { $w->get_text };
-	    }
-	    $w->signal_connect(key_press_event => $may_go_to_next);
-	    $w->set_visibility(0) if $e->{hidden};
-	}
-	$w->signal_connect(focus_out_event => sub { 
-            $update->(sub { $common->{callbacks}{focus_out}($ind) });
-	});
-	$tooltips->set_tip($w, $e->{help}) if $e->{help} && !ref($e->{help});
-
-	$real_w ||= $w;
-	$real_w = gtkpack_(Gtk2::HBox->new,
-			   if_($e->{icon}, 0, eval { gtkcreate_img($e->{icon}) }),
-			   0, gtkadd_widget($label_sizegrp[$e->{advanced} ? 1 : 0], $e->{label}),
-			   1, gtkadd_widget($realw_sizegrp[$e->{advanced} ? 1 : 0], $real_w),
-			  ) if !$real_w->isa("Gtk2::CheckButton") || $e->{icon} || $e->{label};
-
-	{ e => $e, w => $w, real_w => $real_w, focus_w => $focus_w || $w,
-	  get => $get || sub { ${$e->{val}} }, set => $set || sub {}, grow => $grow };
-    };
-    @widgets_always   = map_index { $create_widget->($_, $::i)       } @$l;
-    @widgets_advanced = map_index { $create_widget->($_, $::i + @$l) } @$l2;
-
-    $mainw->{box_allow_grow} = 1;
-    my $pack = create_box_with_title($mainw, @{$common->{messages}});
-    mygtk2::set_main_window_size($mainw->{rwindow}) if $mainw->{pop_it} && (@$l || $mainw->{box_size} == 200);
-
-    my @before_widgets_advanced = (
-	  (map { { grow => 0, real_w => Gtk2::WrappedLabel->new($_) } } @{$common->{advanced_messages}}),
-	    { grow => 0, real_w => Gtk2::HSeparator->new },
-    );
-
-    my $first_time = 1;
-    my $set_advanced = sub {
-	($advanced) = @_;
-	$update->($common->{callbacks}{advanced}) if $advanced && !$first_time;
-	foreach (@before_widgets_advanced, @widgets_advanced) {
-	    my $w = $_->{embed_scroll} || $_->{real_w};
-	    $advanced ? $w->show : $w->hide;
-	}	    
-	@widgets = (@widgets_always, if_($advanced, @widgets_advanced));
-	$first_time = 0;
-	$set_all->(); #- must be done when showing advanced lists (to center selected value)
-    };
-    if ($::expert && @$l2) {
-        $common->{advanced_state} = 1;
-    }
-    my $advanced_button = [ $common->{advanced_state} ? $common->{advanced_label_close} : $common->{advanced_label},
-			    sub { 
-				my ($w) = @_;
-				$set_advanced->(!$advanced);
-				$w->child->set_label($advanced ? $common->{advanced_label_close} : $common->{advanced_label});
-			    } ];
-
-    my @more_buttons = (
-			if_($common->{interactive_help}, 
-			    [ N("Help"), sub { 
-				  my $message = $common->{interactive_help}->() or return;
-				  $o->ask_warn(N("Help"), $message);
-			      }, 1 ]),
-			if_($common->{more_buttons}, @{$common->{more_buttons}}),
-		       );
-    my $buttons_pack = ($common->{ok} || !exists $common->{ok}) && $mainw->create_okcancel($common->{ok}, $common->{cancel}, '', @more_buttons, if_(@$l2, $advanced_button));
-    
-    my @widgets_to_pack;
-    foreach my $l (\@widgets_always, if_(@widgets_advanced, [ @before_widgets_advanced, @widgets_advanced ])) {
-	my @grouped;
-	my $add_grouped = sub {
-	    if (@grouped == 0) {
-	    } elsif (@grouped == 1) {
-		push @widgets_to_pack, 0 => $grouped[0]{real_w};
-	    } else {
-		my $scroll = create_scrolled_window(gtkpack__(Gtk2::VBox->new(0,0), map { $_->{real_w} } @grouped),
-						    [ 'automatic', 'automatic' ], 'none');
-		$_->{embed_scroll} = $scroll foreach @grouped;
-		push @widgets_to_pack, 1 => $scroll;
-	    }
-	    @grouped = ();
-	};
-	foreach (@$l) {
-	    if ($_->{grow}) {
-		$add_grouped->();
-		push @widgets_to_pack, 1 => $_->{real_w};
-	    } else {
-		push @grouped, $_;
-	    }
-	}
-	$add_grouped->();
-    }
-
-    gtkpack_($pack, @widgets_to_pack);
-	    
-    if ($buttons_pack) {
-	$pack->pack_end(gtkshow($buttons_pack), 0, 0, 0);
-    }
-    ugtk2::gtkadd($mainw->{window}, $pack);
-    $set_advanced->($common->{advanced_state});
-    
-    my $widget_to_focus =
-      $common->{focus_cancel} ? $mainw->{cancel} :
-	@widgets && ($common->{focus_first} || !$mainw->{ok} || @widgets == 1 && member(ref($widgets[0]{focus_w}), "Gtk2::TreeView", "Gtk2::RadioButton")) ? 
-	  $widgets[0]{focus_w} : 
-	    $mainw->{ok};
-    $widget_to_focus->grab_focus if $widget_to_focus;
-
-    my $check = sub {
-	my ($f) = @_;
-	sub {
-	    $get_all->();
-	    my ($error, $focus) = $f->();
-	
-	    if ($error) {
-		$set_all->();
-		if (my $to_focus = $widgets[$focus || 0]) {
-		    $to_focus->{focus_w}->grab_focus;
-		} else {
-		    log::l("ERROR: bad entry number given to focus " . backtrace());
-		}
-	    }
-	    !$error;
-	};
-    };
-
-    $_->{set}->($_->{e}{saved_default_val} || next) foreach @widgets_always, @widgets_advanced;
-    $mainw->main(map { $check->($common->{callbacks}{$_}) } 'complete', 'canceled');
-}
-
-
-sub ask_browse_tree_info_refW {
-    my ($o, $common) = @_;
-    add2hash($common, { wait_message => sub { $o->wait_message(@_) } });
-    ugtk2::ask_browse_tree_info($common);
-}
-
-
-sub ask_from__add_modify_removeW {
-    my ($o, $title, $message, $l, %callback) = @_;
-
-    my $e = $l->[0];
-    my $chosen_element;
-    put_in_hash($e, { allow_empty_list => 1, gtk => { use_boxradio => 0 }, sort => 0,
-		      val => \$chosen_element, type => 'list', add_modify_remove => \%callback });
-
-    $o->ask_from($title, $message, $l, %callback);
-}
-
-sub wait_messageW {
-    my ($_o, $title, $messages) = @_;
-
-    my $to_modify;
-    my @l = map { ref $_ ? (0, $_) : (1, $to_modify = Gtk2::Label->new(scalar warp_text($_))) } @$messages;
-    $l[0] = 0; #- force first one
-
-    my $Window = gtknew('MagicWindow',
-			title => $title,
-			pop_it => !$::isInstall, 
-			modal => 1, 
-			if__($::main_window, transient_for => $::main_window),
-			child => gtknew('VBox', padding => 4, border_width => 10, children => \@l),
-		      );
-    $Window->signal_connect(expose_event => sub { $Window->{displayed} = 1; 0 });
-    $Window->{wait_messageW} = $to_modify;
-    mygtk2::sync($Window) while !$Window->{displayed};
-    $Window;
-}
-sub wait_message_nextW {
-    my ($_o, $messages, $Window) = @_;
-    my $msg = warp_text(join "\n", @$messages);
-    return if $msg eq $Window->{wait_messageW}->get_text; #- needed otherwise no expose_event :(
-    $Window->{displayed} = 0;
-    $Window->{wait_messageW}->set($msg);
-    mygtk2::sync($Window) while !$Window->{displayed};
-}
-sub wait_message_endW {
-    my ($_o, $Window) = @_;
-    mygtk2::may_destroy($Window);
-    mygtk2::flush();
-}
-
-sub kill {
-    my ($_o) = @_;
-    $_->destroy foreach $::WizardTable ? $::WizardTable->get_children : (), @tempory::objects;
-    @tempory::objects = ();
-}
-
-sub ok {
-    N("Ok");
-}
-
-sub cancel {
-    N("Cancel");
-}
-
-1;
diff --git a/perl-install/interactive/http.pm b/perl-install/interactive/http.pm
deleted file mode 100644
index 6825ee007..000000000
--- a/perl-install/interactive/http.pm
+++ /dev/null
@@ -1,164 +0,0 @@
-package interactive::http; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(interactive);
-
-use CGI;
-use interactive;
-use common;
-use log;
-
-my $script_name = $ENV{INTERACTIVE_HTTP};
-my $no_header;
-my $pipe_r = "/tmp/interactive_http_r";
-my $pipe_w = "/tmp/interactive_http_w";
-
-sub open_stdout() {
-    open STDOUT, ">$pipe_w" or die;
-    $| = 1;
-    print CGI::header();
-    $no_header = 1;    
-}
-
-# cont_stdout must be called after open_stdout and before the first print
-sub cont_stdout {
-    my ($o_title) = @_;
-    print CGI::start_html('-title' => $o_title) if $no_header;
-    $no_header = 0;
-}
-
-sub new_uid() {
-    my ($s, $ms) = gettimeofday();
-    $s * 256 + $ms % 256;
-}
-
-sub new {
-    open_stdout();
-    bless {}, $_[0];
-}
-
-sub end { 
-    -e $pipe_r or return; # do not run this twice
-    my $q = CGI->new;
-    cont_stdout("Exit");
-    print "It's done, thanks for playing", $q->end_html;
-    close STDOUT;
-    unlink $pipe_r, $pipe_w;
-}
-sub exit { end(); exit($_[1]) }
-END { end() }
-
-sub ask_fromW {
-    my ($o, $common, $l, $_l2) = @_;
-
-  redisplay:
-    my $uid = new_uid();
-    my $q = CGI->new;
-    $q->param(state => 'next_step');
-    $q->param(uid => $uid);
-    cont_stdout($common->{title});
-
-#    print $q->img({ -src => "/icons/$o->{icon}" }) if $o->{icon};
-    print @{$common->{messages}};
-    print $q->start_form('-name' => 'form', '-action' => $script_name, '-method' => 'post');
-
-    print "<table>\n";
-
-    each_index {
-	my $e = $_;
-
-	print "<tr><td>$e->{label}</td><td>\n";
-
-	$e->{type} = 'list' if $e->{type} =~ /(icon|tree)list/;
-
-	#- combo does not exist, fallback to a sensible default
-	$e->{type} = $e->{not_edit} ? 'list' : 'entry' if $e->{type} eq 'combo';
-
-	if ($e->{type} eq 'bool') {
-	    print $q->checkbox('-name' => "w$::i", '-checked' => ${$e->{val}} && 'on', '-label' => $e->{text} || " ");
-	} elsif ($e->{type} eq 'button') {
-	    print "nobuttonyet";
-	} elsif ($e->{type} =~ /list/) {
-	    my %t; 
-	    $t{$_} = may_apply($e->{format}, $_) foreach @{$e->{list}};
-
-	    print $q->scrolling_list('-name' => "w$::i",
-				     '-values' => $e->{list},
-				     '-default' => [ ${$e->{val}} ],
-				     '-size' => 5, '-multiple' => '', '-labels' => \%t);
-	} else {
-	    print $e->{hidden} ?
-	      $q->password_field('-name' => "w$::i", '-default' => ${$e->{val}}) :
-		   $q->textfield('-name' => "w$::i", '-default' => ${$e->{val}});
-	}
-
-	print "</td></tr>\n";
-    } @$l;
-
-    print "</table>\n";
-    print $q->p;
-    print $q->submit('-name' => 'ok_submit', '-value' => $common->{ok} || N("Ok"));
-    print $q->submit('-name' => 'cancel_submit', '-value' => $common->{cancel} || N("Cancel")) if $common->{cancel} || !exists $common->{ok};
-    print $q->hidden('state'), $q->hidden('uid');
-    print $q->end_form, $q->end_html;
-
-    close STDOUT; # page terminated
-
-    while (1) {	
-	open(my $F, "<$pipe_r") or die;
-	$q = CGI->new($F);
-	$q->param('force_exit_dead_prog') and $o->exit;
-	last if $q->param('uid') == $uid;
-
-	open_stdout(); # re-open for writing
-	cont_stdout(N("Error"));
-	print $q->h1(N("Error")), $q->p("Sorry, you can not go back");
-	goto redisplay;
-    }
-    each_index {
-	my $e = $_;
-	my $v = $q->param("w$::i");
-	if ($e->{type} eq 'bool') {
-	    $v = $v eq 'on';
-	}
-	${$e->{val}} = $v;
-    } @$l;
-
-    open_stdout(); # re-open for writing
-    $q->param('ok_submit');
-}
-
-sub p {
-    print "\n" . CGI::br($_) foreach @_;
-}
-
-sub wait_messageW {
-    my ($_o, $_title, $messages) = @_;
-    cont_stdout();
-    print "\n" . CGI::p();
-    p(@$messages);
-}
-
-sub wait_message_nextW {
-    my ($_o, $messages, $_w) = @_;
-    p(@$messages);
-}
-sub wait_message_endW {
-    my ($_o, $_w) = @_;
-    p(N("Done"));
-    print "\n" . CGI::p();
-}
-
-sub ok {
-    N("Ok");
-}
-
-sub cancel {
-    N("Cancel");
-}
-
-
-1;
diff --git a/perl-install/interactive/newt.pm b/perl-install/interactive/newt.pm
deleted file mode 100644
index 5b6c02005..000000000
--- a/perl-install/interactive/newt.pm
+++ /dev/null
@@ -1,431 +0,0 @@
-package interactive::newt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(interactive);
-
-use interactive;
-use common;
-use log;
-use Newt::Newt; #- !! provides Newt and not Newt::Newt
-
-my ($width, $height) = (80, 25);
-my @wait_messages;
-
-sub new {
-    if ($::isInstall) {
-	system('unicode_start'); #- do not use run_program, we must do it on current console
-	{ 
-	    local $ENV{LC_CTYPE} = "en_US.UTF-8";
-	    Newt::Init(1);
-	}
-	c::setlocale();
-    } else {
-	Newt::Init(0);
-    }
-    Newt::Cls();
-    Newt::SetSuspendCallback();
-    ($width, $height) = Newt::GetScreenSize();
-    open STDERR, ">/dev/null" if $::isStandalone && !$::testing;
-    bless {}, $_[0];
-}
-
-sub enter_console { Newt::Suspend() }
-sub leave_console { Newt::Resume() }
-sub suspend { Newt::Suspend() }
-sub resume { Newt::Resume() }
-sub end { Newt::Finished() }
-sub exit { end(); exit($_[1]) }
-END { end() }
-
-sub messages { 
-    my ($width, @messages) = @_;
-    warp_text(join("\n", @messages), $width - 9);
-}
-
-sub myTextbox {
-    my ($allow_scroll, $free_height, @messages) = @_;
-
-    my @l = messages($width, @messages);
-    my $h = min($free_height - 13, int @l);
-
-    my $want_scroll;
-    if ($h < @l) {
-	if ($allow_scroll) {
-	    $want_scroll = 1;
-	} else {
-	    # remove the text, no other way!
-	    @l = @l[0 .. $h-1];
-	}
-    }
-
-    my $mess = Newt::Component::Textbox(1, 0, my $w = max(map { length } @l) + 1, $h, $want_scroll);
-    $mess->TextboxSetText(join("\n", @l));
-    $mess, $w + 1, $h;
-}
-
-sub separator {
-    my $blank = Newt::Component::Form(\undef, '', 0);
-    $blank->FormSetWidth($_[0]);
-    $blank->FormSetHeight($_[1]);
-    $blank;
-}
-sub checkval { $_[0] && $_[0] ne ' '  ? '*' : ' ' }
-
-sub ask_fromW {
-    my ($o, $common, $l, $l2) = @_;
-
-    if (@$l == 1 && $l->[0]{list} && @{$l->[0]{list}} == 2 && listlength(map { split "\n" } @{$common->{messages}}) > 20) {
-	#- special ugly case, esp. for license agreement
-	my $e = $l->[0];
-	my $ok_disabled = $common->{callbacks} && delete $common->{callbacks}{ok_disabled};
-	($common->{ok}, $common->{cancel}) = map { may_apply($e->{format}, $_) } @{$e->{list}};
-	do {
-	    ${$e->{val}} = ask_fromW_real($o, $common, [], $l2) ? $e->{list}[0] : $e->{list}[1];
-	} while $ok_disabled && $ok_disabled->();
-	1;
-    } elsif ((any { $_->{type} ne 'button' } @$l) || @$l < 5) {
-	&ask_fromW_real;
-    } else {
-	$common->{cancel} = N("Do") if $common->{cancel} eq '';
-	my $r;
-	do {
-	    my @choices = map {
-		my $s = simplify_string(may_apply($_->{format}, ${$_->{val}}));
-		$s = "$_->{label}: $s" if $_->{label};
-		{ label => $s, clicked_may_quit => $_->{clicked_may_quit} };
-	    } @$l;
-	    #- replace many buttons with a list
-	    my $new_l = [ { val => \$r, type => 'list', list => \@choices, format => sub { $_[0]{label} }, sort => 0 } ];
-	    ask_fromW_real($o, $common, $new_l, $l2) and return;
-	} until $r->{clicked_may_quit}->();
-	1;
-    }
-}
-
-sub ask_fromW_real {
-    my ($o, $common, $l, $l2) = @_;
-    my $ignore; #-to handle recursivity
-    my $old_focus = -2;
-
-    my @l = $common->{advanced_state} ? @$l2 : @$l;
-    my @messages = (@{$common->{messages}}, if_($common->{advanced_state}, @{$common->{advanced_messages}}));
-
-    #-the widgets
-    my (@widgets, $total_size, $has_scroll);
-
-    my $label_width;
-    my $get_label_width = sub {
-	$label_width ||= max(map { length($_->{label}) } @l);
-    };
-
-    my $set_all = sub {
-	$ignore = 1;
-	$_->{set}->(${$_->{e}{val}}) foreach @widgets;
-#	$_->{w}->set_sensitive(!$_->{e}{disabled}()) foreach @widgets;
-	$ignore = 0;
-    };
-    my $get_all = sub {
-	${$_->{e}{val}} = $_->{get}->() foreach @widgets;
-    };
-    my $create_widget = sub {
-	my ($e, $ind) = @_;
-
-	$e->{type} = 'list' if $e->{type} =~ /iconlist/;
-
-	#- combo does not exist, fallback to a sensible default
-	$e->{type} = $e->{not_edit} ? 'list' : 'entry' if $e->{type} eq 'combo';
-
-	my $changed = sub {
-	    return if $ignore;
-	    return $old_focus++ if $old_focus == -2; #- handle special first case
-	    $get_all->();
-
-	    #- TODO: this is very rough :(
-	    $common->{callbacks}{$old_focus == $ind ? 'changed' : 'focus_out'}->($ind);
-
-	    $set_all->();
-	    $old_focus = $ind;
-	};
-
-	my ($w, $real_w, $set, $get, $expand, $size, $invalid_choice, $extra_text);
-	if ($e->{type} eq 'bool') {
-	    my $subwidth = $width - $get_label_width->() - 9;
-	    my @text = messages($subwidth, $e->{text} || '');
-	    $size = @text;
-	    $w = Newt::Component::Checkbox(shift(@text), checkval(${$e->{val}}), " *");
-	    if (@text) {
-		$extra_text = Newt::Component::Textbox(-1, -1, $subwidth, $size - 1, 0);
-		$extra_text->TextboxSetText(join("\n", @text));
-	    }
-	    $set = sub { $w->CheckboxSetValue(checkval($_[0])) };
-	    $get = sub { $w->CheckboxGetValue == ord '*' };
-	} elsif ($e->{type} eq 'button') {
-	    $w = Newt::Component::Button(simplify_string(may_apply($e->{format}, ${$e->{val}})));
-	} elsif ($e->{type} eq 'treelist') {
-	    $e->{formatted_list} = [ map { may_apply($e->{format}, $_) } @{$e->{list}} ];
-	    my $data_tree = interactive::helper_separator_tree_to_tree($e->{separator}, $e->{list}, $e->{formatted_list});
-
-	    my $count; $count = sub {
-		my ($t) = @_;
-		1 + ($t->{_leaves_} ? int @{$t->{_leaves_}} : 0) 
-		  + ($t->{_order_} ? sum(map { $count->($t->{$_}) } @{$t->{_order_}}) : 0);
-	    };
-	    $size = $count->($data_tree);
-	    
-	    my $prefered_size = @l == 1 && $height > 30 ? 10 : 5;
-	    my $scroll;
-	    if ($size > $prefered_size && !$o->{no_individual_scroll}) {
-		$has_scroll = $scroll = 1;
-		$size = $prefered_size;
-	    }
-
-	    $w = Newt::Component::Tree($size, $scroll);
-
-	    my $wi;
-	    my $add_item = sub {
-		my ($text, $index, $parents) = @_;
-		$text = simplify_string($text, $width - 10);
-		$wi = max($wi, length($text) + 3 * @$parents + 4);
-		$w->TreeAdd($text, $index, $parents);
-	    };
-
-	    my @data = '';
-	    my $populate; $populate = sub {
-		my ($node, $parents) = @_;
-		if (my $l = $node->{_order_}) {
-		    each_index {
-			$add_item->($_, 0, $parents);
-			$populate->($node->{$_}, [ @$parents, $::i ]);
-		    } @$l;
-		}
-		if (my $l = $node->{_leaves_}) {
-		    foreach (@$l) {
-			my ($leaf, $data) = @$_;
-			$add_item->($leaf, int(@data), $parents);
-			push @data, $data;
-		    }
-		}
-	    };
-	    $populate->($data_tree, []);
-
-	    $w->TreeSetWidth($wi + 1);
-	    $get = sub { 
-		my $i = $w->TreeGetCurrent;
-		$invalid_choice = $i == 0;
-		$data[$i];
-	    };
-	    $set = sub {
-		my ($data) = @_;
-		eval { 
-		    my $i = find_index { $_ eq $data } @data;
-		    $w->TreeSetCurrent($i);
-		} if $data;
-		1;
-	    };
-	} elsif ($e->{type} =~ /list/) {
-	    $size = @{$e->{list}};
-	    my $prefered_size = @l == 1 && $height > 30 ? 10 : 5;
-	    my $scroll;
-	    if ($size > $prefered_size && !$o->{no_individual_scroll}) {
-		$has_scroll = $scroll = 1;
-		$size = $prefered_size;
-	    }
-
-	    $w = Newt::Component::Listbox($size, $scroll ? 1 << 2 : 0); #- NEWT_FLAG_SCROLL	    
-
-	    my @l = map { 
-		my $t = simplify_string(may_apply($e->{format}, $_), $width - 10);
-		$w->ListboxAddEntry($t, $_);
-		$t;
-	    } @{$e->{list}};
-
-	    $w->ListboxSetWidth(max(map { length($_) } @l) + 3); # 3 added for the scrollbar (?)
-	    $get = sub { $w->ListboxGetCurrent };
-	    $set = sub {
-		my ($val) = @_;
-		each_index {
-		    $w->ListboxSetCurrent($::i) if $val eq $_;
-		} @{$e->{list}};
-	    };
-	} else {
-	    $w = Newt::Component::Entry('', 20, ($e->{hidden} && 1 << 11) | (1 << 2));
-	    $get = sub { $w->EntryGetValue };
-	    $set = sub { $w->EntrySet($_[0], 1) };
-	}
-	$total_size += $size || 1;
-
-	#- !! callbacks must be kept otherwise perl will free them !!
-	#- (better handling of addCallback needed)
-
-	{ e => $e, w => $w, real_w => $real_w || $w, expand => $expand, callback => $changed,
-	  get => $get || sub { ${$e->{val}} }, set => $set || sub {},
-	  extra_text => $extra_text, invalid_choice => \$invalid_choice };
-    };
-    @widgets = map_index { $create_widget->($_, $::i) } @l;
-
-    $_->{w}->addCallback($_->{callback}) foreach @widgets;
-
-    $set_all->();
-
-    my $grid = Newt::Grid::CreateGrid(3, max(1, sum(map { $_->{extra_text} ? 2 : 1 } @widgets)));
-    my $i;
-    foreach (@widgets) {
-	$grid->GridSetField(0, $i, 1, ${Newt::Component::Label($_->{e}{label})}, 0, 0, 1, 0, 1, 0);
-	$grid->GridSetField(1, $i, 1, ${$_->{real_w}}, 0, 0, 0, 0, 1, 0);
-	$i++;
-	if ($_->{extra_text}) {
-	    $grid->GridSetField(0, $i, 1, ${Newt::Component::Label('')}, 0, 0, 1, 0, 1, 0);
-	    $grid->GridSetField(1, $i, 1, ${$_->{extra_text}}, 0, 0, 0, 0, 1, 0);
-	    $i++;
-	}
-    }
-
-    my $listg = do {
-	my $wanted_header_height = min(8, listlength(messages($width, @messages)));
-	my $height_avail = $height - $wanted_header_height - 13;
-	#- use a scrolled window if there is a lot of checkboxes (aka 
-	#- ask_many_from_list) or a lot of widgets in general (aka
-	#- options of a native PostScript printer in printerdrake)
-	#- !! works badly together with list's (lists are one widget, so a
-	#- big list window will not switch to scrollbar mode) :-(
-	if (@l > 3 && $total_size > $height_avail) {
-	    $grid->GridPlace(1, 1); #- Uh?? otherwise the size allocated is bad
-	    if ($has_scroll) {
-		#- trying again with no_individual_scroll set
-		$o->{no_individual_scroll} and internal_error('no_individual_scroll already set, argh...');
-		$o->{no_individual_scroll} = 1;
-		goto &ask_fromW_real; #- same player shoot again!
-	    }
-	    $has_scroll = 1;
-	    $total_size = $height_avail;
-
-	    my $scroll = Newt::Component::VerticalScrollbar($height_avail, 9, 10); # 9=NEWT_COLORSET_CHECKBOX, 10=NEWT_COLORSET_ACTCHECKBOX
-	    my $subf = $scroll->Form('', 0);
-	    $subf->FormSetHeight($height_avail);
-	    $subf->FormAddGrid($grid, 0);
-	    Newt::Grid::HCloseStacked3($subf, separator(1, $height_avail-1), $scroll);
-	} else {
-	    $grid;
-	}
-    };
-
-    my ($ok, $cancel) = ($common->{ok}, $common->{cancel});
-    my ($need_to_die);
-    if (!defined $cancel && !defined $ok) {
-        $cancel = $::isWizard && !$::Wizard_no_previous ? N("Previous") : N("Cancel") ;
-        $need_to_die = 1 if !($::isWizard && !$::Wizard_no_previous);
-    }
-    $ok ||= $::isWizard ? ($::Wizard_finished ? N("Finish") : N("Next")) : N("Ok");
-
-    my @okcancel = grep { $_ } $ok, $cancel;
-    @okcancel = reverse(@okcancel) if $::isWizard;
-    my @buttons_text = (if_(@$l2, $common->{advanced_state} ? $common->{advanced_label_close} : $common->{advanced_label}), @okcancel);
-    my ($buttonbar, @buttons) = Newt::Grid::ButtonBar(map { simplify_string($_) } @buttons_text);
-    my $advanced_button = @$l2 && shift @buttons;
-    @buttons = reverse(@buttons) if $::isWizard;
-    my ($ok_button, $cancel_button) = @buttons;
-
-    my $form = Newt::Component::Form(\undef, '', 0);
-    my $window = Newt::Grid::GridBasicWindow(first(myTextbox(!$has_scroll, $height - $total_size, @messages)), $listg, $buttonbar);
-    $window->GridWrappedWindow($common->{title} || '');
-    $form->FormAddGrid($window, 1);
-
-    my $check = sub {
-	my ($f) = @_;
-
-	my ($error, $_focus) = $f->();
-	
-	if ($error) {
-	    $set_all->();
-	}
-	!$error;
-    };
-
-    my ($blocked, $canceled);
-    while (1) {
-	my $r = $form->RunForm;
-
-	$get_all->();
-
-	if ($advanced_button && $$r == $$advanced_button) {
-	    invbool(\$common->{advanced_state});
-	    $form->FormDestroy;
-	    Newt::PopWindow();
-	    return &ask_fromW_real;
-	}
-
-	$canceled = $cancel_button && $$r == $$cancel_button;
-
-	next if !$canceled && any { ${$_->{invalid_choice}} } @widgets;
-
-	$blocked = 
-	  $$r == $$ok_button && 
-	    $common->{callbacks}{ok_disabled} && 
-	      do { $common->{callbacks}{ok_disabled}() };
-
-	if (my $button = find { $$r == ${$_->{w}} } @widgets) {
-	    my $v = $button->{e}{clicked_may_quit}();
-	    $form->FormDestroy;
-	    Newt::PopWindow();
-	    return $v || &ask_fromW;
-	}
-	last if !$blocked && $check->($common->{callbacks}{$canceled ? 'canceled' : 'complete'});
-    }
-
-    $form->FormDestroy;
-    Newt::PopWindow();
-    die 'wizcancel' if $need_to_die && $canceled;
-    !$canceled;
-}
-
-
-sub waitbox {
-    my ($title, $messages) = @_;
-    my ($t, $w, $h) = myTextbox(1, $height, @$messages);
-    my $f = Newt::Component::Form(\undef, '', 0);
-    Newt::CenteredWindow($w, $h, $title);
-    $f->FormAddComponent($t);
-    $f->DrawForm;
-    Newt::Refresh();
-    $f->FormDestroy;
-    push @wait_messages, $f;
-    $f;
-}
-
-
-sub wait_messageW {
-    my ($_o, $title, $messages) = @_;
-    { form => waitbox($title, $messages), title => $title };
-}
-
-sub wait_message_nextW {
-    my ($o, $messages, $w) = @_;
-    $o->wait_message_endW($w);
-    $o->wait_messageW($w->{title}, $messages);
-}
-sub wait_message_endW {
-    my ($_o, $_w) = @_;
-    my $_wait = pop @wait_messages;
-#    log::l("interactive_newt does not handle none stacked wait-messages") if $w->{form} != $wait;
-    Newt::PopWindow();
-}
-
-sub simplify_string {
-    my ($s, $o_width) = @_;
-    $s =~ s/\n/ /g;
-    $s = substr($s, 0, $o_width || 40); #- truncate if too long
-    $s;
-}
-
-sub ok {
-    N("Ok");
-}
-
-sub cancel {
-    N("Cancel");
-}
-
-1;
diff --git a/perl-install/interactive/stdio.pm b/perl-install/interactive/stdio.pm
deleted file mode 100644
index 553f3fec5..000000000
--- a/perl-install/interactive/stdio.pm
+++ /dev/null
@@ -1,180 +0,0 @@
-package interactive::stdio; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(interactive);
-
-use interactive;
-use common;
-
-$| = 1;
-
-sub readln() {
-    my $l = <STDIN>;
-    chomp $l;
-    $l;
-}
-
-sub check_it {
-    my ($i, $n) = @_;
-    $i =~ /^\s*\d+\s*$/ && 1 <= $i && $i <= $n;
-}
-
-sub good_choice {
-    my ($def_s, $max) = @_;
-    my $i;
-    do {
-	defined $i and print N("Bad choice, try again\n");
-	print N("Your choice? (default %s) ", $def_s);
-	$i = readln();
-    } until !$i || check_it($i, $max);
-    $i;
-}
-
-sub ask_fromW {
-    my ($_o, $common, $l, $_l2) = @_;
-
-    add2hash_($common, { ok => N("Ok"), cancel => N("Cancel") }) if !exists $common->{ok};
-
-ask_fromW_begin:
-
-    my $already_entries = 0;
-    my $predo_widget = sub {
-	my ($e) = @_;
-
-	$e->{type} = 'list' if $e->{type} =~ /(icon|tree)list/;
-	#- combo does not exist, fallback to a sensible default
-	$e->{type} = $e->{not_edit} ? 'list' : 'entry' if $e->{type} eq 'combo';
-
-	if ($e->{type} eq 'entry') {
-	    my $t = "\t$e->{label} $e->{text}\n";
-	    if ($already_entries) {
-		length($already_entries) > 1 and print N("Entries you'll have to fill:\n%s", $already_entries);
-		$already_entries = 1;
-		print $t;
-	    } else {
-		$already_entries = $t;
-	    }
-	}
-    };
-
-    my @labels;
-    my $format_label = sub { my ($e) = @_; return sprintf("`%s' %s %s\n", ${$e->{val}}, $e->{label}, $e->{text}) };
-    my $do_widget = sub {
-	my ($e, $ind) = @_;
-
-	if ($e->{type} eq 'bool') {
-	    print "$e->{text} $e->{label}\n";
-	    print N("Your choice? (0/1, default `%s') ", ${$e->{val}} || '0');
-	    my $i = readln();
-	    if ($i) {
-		to_bool($i) != to_bool(${$e->{val}}) and $common->{callbacks}{changed}->($ind);
-		${$e->{val}} = $i;
-	    }
-	} elsif ($e->{type} =~ /list/) {
-	    $e->{text} || $e->{label} and print "=> $e->{label} $e->{text}\n";
-	    my $n = 0; my $size = 0;
-	    foreach (@{$e->{list}}) {
-		$n++;
-		my $t = "$n: " . may_apply($e->{format}, $_) . "\t";
-		if ($size + length($t) >= 80) {
-		    print "\n";
-		    $size = 0;
-		}
-		print $t;
-		$size += length($t);
-	    }
-	    print "\n";
-	    my $i = good_choice(may_apply($e->{format}, ${$e->{val}}), $n);
-	    print "Setting to <", $i ? ${$e->{list}}[$i-1] : ${$e->{val}}, ">\n";
-	    $i and ${$e->{val}} = ${$e->{list}}[$i-1], $common->{callbacks}{changed}->($ind);
-	} elsif ($e->{type} eq 'button') {
-	    print N("Button `%s': %s", $e->{label}, may_apply($e->{format}, ${$e->{val}})), " $e->{text}\n";
-	    print N("Do you want to click on this button?");
-	    my $i = readln();
-	    $i && $i !~ /^n/i and $e->{clicked_may_quit}(), $common->{callbacks}{changed}->($ind);
-	} elsif ($e->{type} eq 'label') {
-	    my $t = $format_label->($e);
-	    push @labels, $t;
-	    print $t;
-	} elsif ($e->{type} eq 'entry') {
-	    print "$e->{label} $e->{text}\n";
-	    print N("Your choice? (default `%s'%s) ", ${$e->{val}}, ${$e->{val}} ? N(" enter `void' for void entry") : '');
-	    my $i = readln();
-	    ${$e->{val}} = $i || ${$e->{val}};
-	    ${$e->{val}} = '' if ${$e->{val}} eq 'void';
-	    print "Setting to <", ${$e->{val}}, ">\n";
-	    $i and $common->{callbacks}{changed}->($ind);
-	} else {
-	    printf "UNSUPPORTED WIDGET TYPE (type <%s> label <%s> text <%s> val <%s>\n", $e->{type}, $e->{label}, $e->{text}, ${$e->{val}};
-	}
-    };
-
-    print "* ";
-    $common->{title} and print "$common->{title}\n";
-    print(map { "$_\n" } @{$common->{messages}});
-
-    $predo_widget->($_) foreach @$l;
-    if (listlength(@$l) > 30) {
-	my $ll = listlength(@$l);
-	print N("=> There are many things to choose from (%s).\n", $ll);
-ask_fromW_handle_verylonglist:
-	print
-N("Please choose the first number of the 10-range you wish to edit,
-or just hit Enter to proceed.
-Your choice? ");
-	my $i = readln();
-	if (check_it($i, $ll)) {
-	    each_index { $do_widget->($_, $::i) } grep_index { $::i >= $i-1 && $::i < $i+9 } @$l;
-	    goto ask_fromW_handle_verylonglist;
-	}
-    } else {
-	each_index { $do_widget->($_, $::i) } @$l;
-    }
-
-    my $lab;
-    each_index { $labels[$::i] && (($lab = $format_label->($_)) ne $labels[$::i]) and print N("=> Notice, a label changed:\n%s", $lab) }
-      grep { $_->{type} eq 'label' } @$l;
-
-    my $i;
-    if (listlength(@$l) != 1 || $common->{ok} ne N("Ok") || $common->{cancel} ne N("Cancel")) {
-	print "[1] ", $common->{ok} || N("Ok");
-	$common->{cancel} and print "  [2] $common->{cancel}";
-	@$l and print "  [9] ", N("Re-submit");
-	print "\n";
-	do {
-	    defined $i and print N("Bad choice, try again\n");
-	    print N("Your choice? (default %s) ", $common->{focus_cancel} ? $common->{cancel} : $common->{ok});
-	    $i = readln() || ($common->{focus_cancel} ? "2" : "1");
-	} until check_it($i, 9);
-	$i == 9 and goto ask_fromW_begin;
-    } else {
-	$i = 1;
-    }
-    my ($callback_error) = $common->{callbacks}{$i == 2 ? 'canceled' : 'complete'}->();
-    $callback_error and goto ask_fromW_begin;
-    return $i != 2;
-}
-
-sub wait_messageW {
-    my ($_o, $_title, $message) = @_;
-    print join "\n", @$message;
-}
-sub wait_message_nextW { 
-    my $m = join "\n", @{$_[1]};
-    print "\r$m", ' ' x (60 - length $m);
-}
-sub wait_message_endW { print "\nDone\n" }
-
-sub ok {
-    N("Ok");
-}
-
-sub cancel {
-    N("Cancel");
-}
-
-1;
-
diff --git a/perl-install/keyboard.pm b/perl-install/keyboard.pm
deleted file mode 100644
index 5332a62fa..000000000
--- a/perl-install/keyboard.pm
+++ /dev/null
@@ -1,674 +0,0 @@
-package keyboard; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use detect_devices;
-use run_program;
-use lang;
-use log;
-use c;
-
-
-#-######################################################################################
-#- Globals
-#-######################################################################################
-my $KMAP_MAGIC = 0x8B39C07F;
-
-#- a best guess of the keyboard layout, based on the choosen locale
-#- beware only the first 5 characters of the locale are used
-our %lang2keyboard =
-(
-  'af'  => 'us_intl',
-  'am'  => 'us:90',
-  'ar'  => 'ar:90',
-  'as'  => 'ben:90 ben2:80 us_intl:5',
-  'az'  => 'az:90 tr_q:10 us_intl:5',
-'az_IR' => 'ir:90',
-  'be'  => 'by:90 ru:50 ru_yawerty:40',
-# 'ber' => 'tifinagh:80 tifinagh_p:70',
-  'ber' => 'tifinagh_p:90',
-  'bg'  => 'bg_phonetic:60 bg:50',
-  'bn'  => 'ben:90 ben2:80 dev:20 us_intl:5',
-  'bo'	=> 'dz',
-  'br'  => 'fr:90',
-  'bs'  => 'bs:90',
-  'ca'  => 'es:90 fr:15',
-  'chr' => 'chr:80 us:60 us_intl:60',
-  'cs'  => 'cz_qwerty:70 cz:50',
-  'cy'  => 'uk:90',
-  'da'  => 'dk:90',
-  'de'  => 'de_nodeadkeys:70 de:50 be:50 ch_de:50',
-  'dz'	=> 'dz',
-  'el'  => 'gr:90',
-  'en'  => 'us:89 us_intl:50 qc:50 uk:50',
-'en_IE' => 'ie:80 uk:70 dvorak_gb:10',
-'en_US' => 'us:90 us_intl:50 dvorak:10',
-'en_GB' => 'uk:89 us:60 us_intl:50 dvorak_gb:10',
-  'eo'  => 'us_intl:89 dvorak_eo:30 dvorak:10',
-  'es'  => 'es:85 la:80 us_intl:50',
-  'et'  => 'ee:90',
-  'eu'  => 'es:90 fr:15',
-  'fa'  => 'ir:90',
-  'fi'  => 'fi:90',
-  'fo'  => 'fo:80 is:70 dk:60',
-  'fr'  => 'fr:89 qc:85 be:85 ch_fr:70 dvorak_fr:20',
-  'fur' => 'it:90',
-  'ga'  => 'ie:80 uk:70 dvorak_gb:10',
-  'gd'  => 'uk:80 ie:70 dvorak_gb:10',
-  'gl'  => 'es:90',
-  'gn'  => 'la:85 es:80 us_intl:50',
-  'gu'  => 'guj:90',
-  'gv'  => 'uk:80 ie:70',
-  'he'  => 'il:90 il_phonetic:10',
-  'hi'  => 'dev:90',
-  'hr'  => 'hr:90 si:50',
-  'hu'  => 'hu:90',
-  'hy'  => 'am:90 am_old:10 am_phonetic:5',
-  'ia'  => 'us:90 us_intl:20',
-  'id'  => 'us:90 us_intl:20',
-  'is'  => 'is:90',
-  'it'  => 'it:90 ch_fr:50 ch_de:50',
-  'iu'  => 'iu:90',
-  'ja'  => 'jp:90 us:50 us_intl:20',
-  'ka'  => 'ge_la:90 ge_ru:50',
-  'kl'  => 'dk:80 us_intl:30',
-  'kn'  => 'kan:90',
-  'ko'  => 'kr:90 us:60',
-  'ku'  => 'tr_q:90 tr_f:30',
-'ku_IQ' => 'ku:90',
-  'kw'  => 'uk:80 ie:70',
-  'ky'  => 'ky:90 ru_yawerty:40',
-  'lb'  => 'ch_fr:89 be:85 us_intl:70 fr:60 dvorak_fr:20',
-  'li'  => 'us_intl:80 be:70 nl:10 us:5',
-  'lo'  => 'lao:90',
-  'lt'  => 'lt:80 lt_new:70 lt_b:60 lt_p:50',
-  'ltg' => 'lv:90 lt:40 lt_new:30 lt_b:20 lt_p:10 ee:5',
-  'lv'  => 'lv:90 lt:40 lt_new:30 lt_b:20 lt_p:10 ee:5',
-  'mi'  => 'us_intl:90 uk:20 us:10',
-  'mk'  => 'mk:90',
-  'ml'  => 'mal:90',
-  'mn'  => 'mng:90 ru:20 ru_yawerty:5',
-  'mr'  => 'dev:90',
-  'ms'  => 'us:90 us_intl:20',
-  'mt'  => 'mt:90 mt_us:35 us_intl:10',
-  'my'  => 'mm:90',
-  'nb'  => 'no:90 dvorak_no:10',
-  'nds' => 'de_nodeadkeys:70 de:50 us_intl:40 nl:10 us:5',
-  'ne'  => 'dev:90',
-  'nl'  => 'us_intl:80 be:70 nl:10 us:5',
-  'nn'  => 'no:90 dvorak_no:10',
-  'no'  => 'no:90 dvorak_no:10', # for compatiblity only
-  'oc'  => 'fr:90',
-  'or'  => 'ori:90',
-  'pa'  => 'gur:90',
-  'ph'  => 'us:90 us_intl:20',
-  'pl'  => 'pl:90 pl2:60 dvorak_pl:10',
-  'pp'  => 'br:80 la:20 pt:10 us_intl:30',
-  'ps'  => 'ps:80 sd:60',
-'pt_BR' => 'br:90 la:20 pt:10 us_intl:30',
-  'pt'  => 'pt:90',
-  'ro'  => 'ro2:80 ro:40 us_intl:10',
-  'ru'  => 'ru:85 ru_yawerty:80 ua:50',
-  'sc'  => 'it:90',
-  'sd'  => 'sd:80 ar:20',
-  'se'  => 'sapmi:70 sapmi_sefi:50',
-  'sh'  => 'yu:80',
-  'sk'  => 'sk_qwerty:80 sk:70',
-  'sl'  => 'si:90 hr:50',
-  'sq'  => 'al:90',
-  'sr'  => 'sr:80',
-  'ss'  => 'us_intl',
-  'st'  => 'us_intl',
-  'sv'  => 'se:90 fi:30 dvorak_se:10',
-  'ta'  => 'tscii:80 tml:20',
-  'te'  => 'tel:90',
-  'tg'  => 'tj:90 ru_yawerty:40',
-  'th'  => 'th:80 th_pat:50 th_tis:60',
-  'tk'  => 'tk:80 tr_q:50 tr_f:40',
-  'tl'  => 'us:90 us_intl:20',
-  'tr'  => 'tr_q:90 tr_f:30',
-  'tt'  => 'ru:50 ru_yawerty:40',
-  'uk'  => 'ua:90 ru:50 ru_yawerty:40',
-  'ur'  => 'ur:80 sd:60 ar:20',
-  'uz'  => 'uz:80 ru_yawerty:40',
-  'uz\@Cyrl'  => 'uz:80 ru_yawerty:40',
-  'uz\@Latn'  => 'us:80 uz:80',
-  've'  => 'us_intl',
-  'vi'  => 'vn:80 us:70 us_intl:60',
-  'wa'  => 'be:90 fr:5',
-  'xh'  => 'us_intl',
-  'yi'  => 'il_phonetic:90 il:10 us_intl:10',
-'zh_CN' => 'us',
-'zh_TW' => 'us',
-  'zu'  => 'us_intl',
-);
-
-# USB kbd table
-# The numeric values are the bCountryCode field (5th byte)  of HID descriptor
-# NOTE: we do not trust when the layout is declared as US layout (0x21)
-# as most manufacturers just use that value when selling physical devices
-# with different layouts printed on the keys.
-my @usb2keyboard =
-(
-  qw(SKIP ar_SKIP be ca_SKIP qc cz dk fi fr de gr il hu us_intl it jp),
-#- 0x10
-  qw(kr la nl no ir pl pt ru sk es se ch_de ch_de ch_de tw_SKIP tr_q),
-#- 0x20
-  qw(uk us_SKIP yu tr_f),
-#- higher codes not attribued as of 2002-02
-);
-
-#- key = extension for Xmodmap file, [0] = description of the keyboard,
-#- [1] = name for loadkeys, [2] = name for XKB, [3] = "1" if it is
-#- a multigroup layout (eg: one with latin/non-latin letters)
-my %keyboards = (
-arch() =~ /^sparc/ ? (
- "cz" => [ N_("_: keyboard\nCzech (QWERTZ)"), "sunt5-cz-us",	 "cz",    0 ],
- "de" => [ N_("_: keyboard\nGerman"),         "sunt5-de-latin1", "de",    0 ],
- "dvorak" => [ N_("_: keyboard\nDvorak"),     "sundvorak",       "dvorak",0 ],
- "es" => [ N_("_: keyboard\nSpanish"),        "sunt5-es",        "es",    0 ],
- "fi" => [ N_("_: keyboard\nFinnish"),        "sunt5-fi-latin1", "fi",    0 ],
- "fr" => [ N_("_: keyboard\nFrench"),         "sunt5-fr-latin1", "fr",    0 ],
- "no" => [ N_("_: keyboard\nNorwegian"),      "sunt4-no-latin1", "no",    0 ],
- "pl" => [ N_("_: keyboard\nPolish"),         "sun-pl-altgraph", "pl",    0 ],
- "ru" => [ N_("_: keyboard\nRussian"),        "sunt5-ru",        "ru",    1 ],
-# TODO: check the console map
- "se" => [ N_("_: keyboard\nSwedish"),        "sunt5-fi-latin1", "se",    0 ],
- "uk" => [ N_("UK keyboard"),    "sunt5-uk",        "gb",    0 ],
- "us" => [ N_("US keyboard"),    "sunkeymap",       "us",    0 ],
-) : (
- "al" => [ N_("_: keyboard\nAlbanian"),       "al",              "al",    0 ],
- "am_old" => [ N_("_: keyboard\nArmenian (old)"), "am_old",	 "am(old)", 1 ],
- "am" => [ N_("_: keyboard\nArmenian (typewriter)"), "am-armscii8", "am",   1 ],
- "am_phonetic" => [ N_("_: keyboard\nArmenian (phonetic)"), "am_phonetic", "am(phonetic)",1 ],
- "ar" => [ N_("_: keyboard\nArabic"),          "us",             "ar(digits)",   1 ],
- "az" => [ N_("_: keyboard\nAzerbaidjani (latin)"), "az",        "az",    0 ],
- "be" => [ N_("_: keyboard\nBelgian"),        "be2-latin1",      "be",    0 ],
- "ben" => [ N_("_: keyboard\nBengali (Inscript-layout)"), "us",  "ben",   1 ],
- "ben2" => [ N_("_: keyboard\nBengali (Probhat)"), "us", "ben(probhat)",  1 ],
-"bg_phonetic" => [ N_("_: keyboard\nBulgarian (phonetic)"), "bg", "bg(phonetic)", 1 ],
- "bg" => [ N_("_: keyboard\nBulgarian (BDS)"), "bg",             "bg",    1 ],
- "br" => [ N_("_: keyboard\nBrazilian (ABNT-2)"), "br-abnt2",    "br",    0 ],
- "bs" => [ N_("_: keyboard\nBosnian"),	 "croat",           "bs",    0 ],
- "by" => [ N_("_: keyboard\nBelarusian"),     "by-cp1251",       "by",    1 ],
-# old XKB layout
- "ch_de" => [ N_("_: keyboard\nSwiss (German layout)"), "sg-latin1", "de_CH", 0 ],
-# old XKB layout
- "ch_fr" => [ N_("_: keyboard\nSwiss (French layout)"), "fr_CH-latin1", "fr_CH", 0 ],
-# TODO: console map
- "chr" => [ N_("_: keyboard\nCherokee syllabics"), "us",         "chr",   1 ],
- "cz" => [ N_("_: keyboard\nCzech (QWERTZ)"), "cz",              "cz",    0 ],
- "cz_qwerty" => [ N_("_: keyboard\nCzech (QWERTY)"), "cz-lat2", "cz_qwerty", 0 ],
- "de" => [ N_("_: keyboard\nGerman"),         "de-latin1",       "de",    0 ],
- "de_nodeadkeys" => [ N_("_: keyboard\nGerman (no dead keys)"), "de-latin1-nodeadkeys", "de(nodeadkeys)", 0 ],
- "dev" => [ N_("_: keyboard\nDevanagari"),     "us",             "dev",   0 ],
- "dk" => [ N_("_: keyboard\nDanish"),         "dk-latin1",       "dk",    0 ],
- "dvorak" => [ N_("_: keyboard\nDvorak (US)"), "pc-dvorak-latin1", "dvorak", 0 ],
-# TODO: console map
- "dvorak_eo" => [ N_("_: keyboard\nDvorak (Esperanto)"), "us",   "dvorak(eo)", 0 ],
-# TODO: console map
- "dvorak_fr" => [ N_("_: keyboard\nDvorak (French)"),    "us",   "dvorak(fr)", 0 ],
-# TODO: console map
- "dvorak_gb" => [ N_("_: keyboard\nDvorak (UK)"),        "pc-dvorak-latin1", "dvorak(gb)", 0 ],
- "dvorak_no" => [ N_("_: keyboard\nDvorak (Norwegian)"), "no-dvorak", "dvorak(no)", 0 ],
-# TODO: console map
- "dvorak_pl" => [ N_("_: keyboard\nDvorak (Polish)"),    "us",   "dvorak(pl)", 0 ],
- "dvorak_se" => [ N_("_: keyboard\nDvorak (Swedish)"), "se-dvorak", "dvorak(se)", 0 ],
- "dz" => [ N_("_: keyboard\nDzongkha/Tibetan"), "us",            "dz",    1 ],
- "ee" => [ N_("_: keyboard\nEstonian"),       "ee-latin9",       "ee",    0 ],
- "es" => [ N_("_: keyboard\nSpanish"),        "es-latin1",       "es",    0 ],
- "fi" => [ N_("_: keyboard\nFinnish"),        "fi-latin1",       "fi",    0 ],
-# there used to be a "fo" layout in XFree86...
- "fo" => [ N_("_: keyboard\nFaroese"),        "is",              "is",    0 ],
- "fr" => [ N_("_: keyboard\nFrench"),         "fr-latin1",       "fr",    0 ],
- "ge_ru" => [N_("_: keyboard\nGeorgian (\"Russian\" layout)"), "ge_ru-georgian_academy", "ge_ru",1],
- "ge_la" => [N_("_: keyboard\nGeorgian (\"Latin\" layout)"), "ge_la-georgian_academy", "ge_la",1],
- "gr" => [ N_("_: keyboard\nGreek"),          "gr-8859_7",       "el(extended)",  1 ],
- "gr_pl" => [ N_("_: keyboard\nGreek (polytonic)"), "gr-8859_7", "el(polytonic)", 1 ],
- "guj" => [ N_("_: keyboard\nGujarati"),      "us",              "guj",   1 ],
- "gur" => [ N_("_: keyboard\nGurmukhi"),      "us",              "gur",   1 ],
- "hr" => [ N_("_: keyboard\nCroatian"),       "croat",           "hr",    0 ],
- "hu" => [ N_("_: keyboard\nHungarian"),      "hu-latin2",       "hu",    0 ],
- "ie" => [ N_("_: keyboard\nIrish"),          "uk",              "ie",    0 ],
- "il" => [ N_("_: keyboard\nIsraeli"),        "il-8859_8",       "il",    1 ],
- "il_phonetic" => [ N_("_: keyboard\nIsraeli (phonetic)"), "hebrew", "il_phonetic", 1 ],
- "ir" => [ N_("_: keyboard\nIranian"),        "ir-isiri_3342",   "ir",    1 ],
- "is" => [ N_("_: keyboard\nIcelandic"),      "is-latin1",       "is",    0 ],
- "it" => [ N_("_: keyboard\nItalian"),        "it-latin1",       "it",    0 ],
- "iu" => [ N_("_: keyboard\nInuktitut"),      "us",              "iu",    1 ],
-# old XKB layout
-# Japanese keyboard is dual latin/kana; but telling it here shows a
-# message to choose the switching key that is misleading, as input methods
-# are not automatically enabled when typing in kana
- "jp" => [ N_("_: keyboard\nJapanese 106 keys"), "jp106",        "jp",    0 ],
- "kan" => [ N_("_: keyboard\nKannada"),        "us",              "kan",  1 ],
-# There is no XKB korean file yet; but using xmodmap one disables
-# some functionality; "us" used for XKB until this is fixed
- "kr" => [ N_("_: keyboard\nKorean"),          "us",             "us",    1 ],
-# TODO: console map
- "ku" => [ N_("_: keyboard\nKurdish (arabic script)"), "us",     "ku",    1 ],
- "ky" => [ N_("_: keyboard\nKyrgyz"),          "ky",             "ky",    1 ],
- "la" => [ N_("_: keyboard\nLatin American"), "la-latin1",       "la",    0 ],
-# TODO: console map
- "lao" => [ N_("_: keyboard\nLaotian"),	 "us",	            "lo",    1 ], 
- "lt" => [ N_("_: keyboard\nLithuanian AZERTY (old)"), "lt-latin7", "lt(lt_a)", 0 ],
-#- TODO: write a console kbd map for lt_new
- "lt_new" => [ N_("_: keyboard\nLithuanian AZERTY (new)"), "lt-latin7", "lt(lt_std)", 0 ],
- "lt_b" => [ N_("_: keyboard\nLithuanian \"number row\" QWERTY"), "ltb-latin7", "lt(lt_us)", 1 ],
- "lt_p" => [ N_("_: keyboard\nLithuanian \"phonetic\" QWERTY"), "ltp-latin7", "lt(phonetic)", 0 ],
- "lv" => [ N_("_: keyboard\nLatvian"),	 "lv-latin7",       "lv",    0 ],
- "mal" => [ N_("_: keyboard\nMalayalam"),	 "us",              "ml(mlplusnum)", 1 ],
- "mk" => [ N_("_: keyboard\nMacedonian"),	 "mk",              "mk",    1 ],
- "mm" => [ N_("_: keyboard\nMyanmar (Burmese)"), "us",           "mm",    1 ],
- "mng" => [ N_("_: keyboard\nMongolian (cyrillic)"), "us",       "mng",   1 ],
- "mt" => [ N_("_: keyboard\nMaltese (UK)"),   "uk",              "mt",    0 ],
- "mt_us" => [ N_("_: keyboard\nMaltese (US)"), "us",             "mt_us", 0 ],
- "nl" => [ N_("_: keyboard\nDutch"),          "nl-latin1",       "nl",    0 ],
- "no" => [ N_("_: keyboard\nNorwegian"),      "no-latin1",       "no",    0 ],
- "ori" => [ N_("_: keyboard\nOriya"),         "us",              "ori",   1 ],
- "pl" => [ N_("_: keyboard\nPolish (qwerty layout)"), "pl",      "pl",    0 ],
- "pl2" => [ N_("_: keyboard\nPolish (qwertz layout)"), "pl-latin2", "pl2", 0 ],
-# TODO: console map
- "ps" => [ N_("_: keyboard\nPashto"),         "us",              "ps",    1 ],
- "pt" => [ N_("_: keyboard\nPortuguese"),     "pt-latin1",       "pt",    0 ],
-# old XKB layout; change "ca_enhanced" -> "ca" once we ship new XKB
- "qc" => [ N_("_: keyboard\nCanadian (Quebec)"), "qc-latin1", "ca_enhanced", 0 ],
-#- TODO: write a console kbd map for ro2
- "ro2" => [ N_("_: keyboard\nRomanian (qwertz)"), "ro2",         "ro",    0 ],
- "ro" => [ N_("_: keyboard\nRomanian (qwerty)"), "ro",           "ro(us_ro)", 0 ],
- "ru" => [ N_("_: keyboard\nRussian"),        "ru4",             "ru(winkeys)", 1 ],
- "ru_yawerty" => [ N_("_: keyboard\nRussian (phonetic)"), "ru-yawerty", "ru(phonetic)", 1 ],
- "sapmi" => [ N_("_: keyboard\nSaami (norwegian)"), "no-latin1",  "sapmi", 0 ],
- "sapmi_sefi" => [ N_("_: keyboard\nSaami (swedish/finnish)"), "se-latin1", "sapmi(sefi)", 0 ],
-# TODO: console map
- "sd" => [ N_("_: keyboard\nSindhi"),         "us",              "sd",    1 ],
- "se" => [ N_("_: keyboard\nSwedish"),        "se-latin1",       "se",    0 ],
- "si" => [ N_("_: keyboard\nSlovenian"),      "slovene",         "si",    0 ],
-# TODO: console map
- "sin" => [ N_("_: keyboard\nSinhala"),       "us",              "sin",   1 ],
- "sk" => [ N_("_: keyboard\nSlovakian (QWERTZ)"), "sk-qwertz",   "sk",    0 ],
- "sk_qwerty" => [ N_("_: keyboard\nSlovakian (QWERTY)"), "sk-qwerty", "sk_qwerty", 0 ],
-# TODO: console map
- "sr" => [ N_("_: keyboard\nSerbian (cyrillic)"), "sr",          "yu,sr",    1 ],
- "syr" => [ N_("_: keyboard\nSyriac"),         "us",             "syr",  1 ],
- "syr_p" => [ N_("_: keyboard\nSyriac (phonetic)"), "us",        "syr_phonetic",  1 ],
- "tel" => [ N_("_: keyboard\nTelugu"),         "us",             "tel",  1 ],
-# no console kbd that I'm aware of
- "tml" => [ N_("_: keyboard\nTamil (ISCII-layout)"), "us",       "tml(INSCRIPT)",   1 ],
- "tscii" => [ N_("_: keyboard\nTamil (Typewriter-layout)"), "us", "tml(UNI)", 1 ],
- "th" => [ N_("_: keyboard\nThai (Kedmanee)"), "th",             "th",    1 ],
- "th_tis" => [ N_("_: keyboard\nThai (TIS-820)"), "th",          "th_tis", 1 ],
-# TODO: console map
- "th_pat" => [ N_("_: keyboard\nThai (Pattachote)"), "us",       "th_pat", 1 ],
-# TODO: console map
-# NOTE: we define a triple layout here
- "tifinagh" => [ N_("_: keyboard\nTifinagh (moroccan layout) (+latin/arabic)"), "fr", "fr,tifinagh,ar(azerty)", 1 ],
- "tifinagh_p" => [ N_("_: keyboard\nTifinagh (phonetic) (+latin/arabic)"), "fr", "fr,tifinagh(phonetic),ar(azerty)", 1 ],
-# TODO: console map
- "tj" => [ N_("_: keyboard\nTajik"),         "ru4",             "tj",    1 ],
-# TODO: console map
- "tk" => [ N_("_: keyboard\nTurkmen"),        "us",              "tk",    0 ],
- "tr_f" => [ N_("_: keyboard\nTurkish (traditional \"F\" model)"), "trf", "tr(tr_f)", 0 ],
- "tr_q" => [ N_("_: keyboard\nTurkish (modern \"Q\" model)"), "tr_q-latin5", "tr", 0 ],
-#-"tw => [ N_("_: keyboard\nChineses bopomofo"), "tw",           "tw",    1 ],
- "ua" => [ N_("_: keyboard\nUkrainian"),      "ua",              "ua",    1 ],
- "uk" => [ N_("UK keyboard"),    "uk",              "gb",    0 ],
-# TODO: console map
- "ur" => [ N_("_: keyboard\nUrdu keyboard"),  "us",              "ur",    1 ],
- "us" => [ N_("US keyboard"),    "us",              "en_US", 0 ],
- "us_intl" => [ N_("US keyboard (international)"), "us-latin1", "us_intl", 0 ],
- "uz" => [ N_("_: keyboard\nUzbek (cyrillic)"), "uz.uni",         "uz",    1 ],
-# old XKB layout
- "vn" => [ N_("_: keyboard\nVietnamese \"numeric row\" QWERTY"), "vn-tcvn", "vn(toggle)", 0 ], 
- "yu" => [ N_("_: keyboard\nYugoslavian (latin)"), "sr",         "yu",    0 ],
-),
-);
-
-#- list of  possible choices for the key combinations to toggle XKB groups
-#- (eg in X86Config file: XkbOptions "grp:toggle")
-my %grp_toggles = (
-    toggle => N_("Right Alt key"),
-    shift_toggle => N_("Both Shift keys simultaneously"),
-    ctrl_shift_toggle => N_("Control and Shift keys simultaneously"),
-    caps_toggle => N_("CapsLock key"),
-    shift_caps_toggle => N_("Shift and CapsLock keys simultaneously"),
-    ctrl_alt_toggle => N_("Ctrl and Alt keys simultaneously"),
-    alt_shift_toggle => N_("Alt and Shift keys simultaneously"),
-    menu_toggle => N_("\"Menu\" key"),
-    lwin_toggle => N_("Left \"Windows\" key"),
-    rwin_toggle => N_("Right \"Windows\" key"),
-    ctrls_toggle => N_("Both Control keys simultaneously"),
-    alts_toggle => N_("Both Alt keys simultaneously"),
-    lshift_toggle => N_("Left Shift key"),
-    rshift_toggle => N_("Right Shift key"),
-    lalt_toggle => N_("Left Alt key"),
-    lctrl_toggle => N_("Left Control key"),
-    rctrl_toggle => N_("Right Control key"),
-);
-
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub KEYBOARDs() { keys %keyboards }
-sub KEYBOARD2text { $keyboards{$_[0]} && $keyboards{$_[0]}[0] }
-sub keyboards() { map { { KEYBOARD => $_ } } keys %keyboards }
-sub keyboard2one {
-    my ($keyboard, $nb) = @_;
-    ref $keyboard or is_xbox() ? return undef : internal_error();
-    my $l = $keyboards{$keyboard->{KEYBOARD}} or return;
-    $l->[$nb];
-}
-sub keyboard2text { keyboard2one($_[0], 0) }
-sub keyboard2kmap { keyboard2one($_[0], 1) }
-sub keyboard2xkb  { keyboard2one($_[0], 2) }
-
-sub xkb_models() {
-    my $models = parse_xkb_rules()->{model};
-    [ map { $_->[0] } @$models ], { map { @$_ } @$models };
-}
-
-sub grp_toggles {
-    my ($keyboard) = @_;
-    keyboard2one($keyboard, 3) or return;
-    \%grp_toggles;
-}
-
-sub group_toggle_choose {
-    my ($in, $keyboard) = @_;
-
-    if (my $grp_toggles = keyboard::grp_toggles($keyboard)) {
-	my $GRP_TOGGLE = $keyboard->{GRP_TOGGLE} || 'caps_toggle';
-	$GRP_TOGGLE = $in->ask_from_listf('', N("Here you can choose the key or key combination that will 
-allow switching between the different keyboard layouts
-(eg: latin and non latin)"), sub { translate($grp_toggles->{$_[0]}) }, [ sort keys %$grp_toggles ], $GRP_TOGGLE) or return;
-
-        $GRP_TOGGLE ne 'rctrl_toggle' and $in->ask_warn(N("Warning"), formatAlaTeX(
-N("This setting will be activated after the installation.
-During installation, you will need to use the Right Control
-key to switch between the different keyboard layouts.")));
-        log::l("GRP_TOGGLE: $GRP_TOGGLE");
-        $keyboard->{GRP_TOGGLE} = $GRP_TOGGLE;
-    } else {
-        $keyboard->{GRP_TOGGLE} = '';
-    }
-    1;
-}
-
-sub loadkeys_files {
-    my ($err) = @_;
-    my $archkbd = arch() =~ /^sparc/ ? "sun" : arch() =~ /i.86/ ? "i386" : arch() =~ /ppc/ ? "mac" : arch();
-    my $p = "/usr/lib/kbd/keymaps/$archkbd";
-    my $post = ".kmap.gz";
-    my %trans = ("cz-latin2" => "cz-lat2");
-    my %find_file;
-    foreach my $dir (all($p)) {
-	$find_file{$dir} = '';
-	foreach (all("$p/$dir")) {
-	    $find_file{$_} and $err->("file $_ is both in $find_file{$_} and $dir") if $err;
-	    $find_file{$_} = "$p/$dir/$_";
-	}
-    }
-    my (@l, %l);
-    foreach (values %keyboards) {
-	local $_ = $trans{$_->[1]} || $_->[1];
-	my $l = $find_file{"$_$post"} || $find_file{first(/(..)/) . $post};
-	if ($l) {
-	    push @l, $l;
-	    foreach (`zgrep include $l | grep "^include"`) {
-		/include\s+"(.*)"/ or die "bad line $_";
-		@l{grep { -e $_ } ("$p/$1.inc.gz")} = ();
-	    }
-	} else {
-	    $err->("invalid loadkeys keytable $_") if $err;
-	}
-    }
-    uniq(@l, keys %l, grep { -e $_ } map { "$p/$_.inc.gz" } qw(compose euro windowkeys linux-keys-bare));
-}
-
-sub unpack_keyboards {
-    my ($k) = @_; $k or return;
-    [ grep { 
-	my $b = $keyboards{$_->[0]};
-	$b or log::l("bad keyboard $_->[0] in %keyboard::lang2keyboard");
-	$b;
-    } map { [ split ':' ] } split ' ', $k ];
-}
-sub lang2keyboards {
-    my @li = sort { $b->[1] <=> $a->[1] } map { @$_ } map {
-	my $h = lang::analyse_locale_name($_);
-	#- example: pt_BR and pt
-	my @l = (if_($h->{country}, $h->{main} . '_' . $h->{country}), $h->{main});
-	my $k = find { $_ } map { $lang2keyboard{$_} } @l;
-	unpack_keyboards($k) || [ [ ($keyboards{$_} ? $_ : "us") => 100 ] ];
-    } @_;
-    \@li;
-}
-sub lang2keyboard {
-    my ($l) = @_;
-
-    my $kb = lang2keyboards($l)->[0][0];
-    { KEYBOARD => $keyboards{$kb} ? $kb : 'us' }; #- handle incorrect keyboard mapping to us.
-}
-
-sub from_usb() {
-    return if $::noauto;
-    my ($usb_kbd) = detect_devices::usbKeyboards() or return;
-    my $country_code = detect_devices::usbKeyboard2country_code($usb_kbd) or return;
-    my $keyboard = $usb2keyboard[$country_code];
-    $keyboard !~ /SKIP/ && { KEYBOARD => $keyboard };
-}
-
-sub load {
-    my ($keymap) = @_;
-    return if $::testing;
-
-    my ($magic, $tables_given, @tables) = common::unpack_with_refs('I' . 
-								   'i' . c::MAX_NR_KEYMAPS() . 
-								   's' . c::NR_KEYS() . '*',
-								   $keymap);
-    $magic != $KMAP_MAGIC and die "failed to read kmap magic";
-
-    sysopen(my $F, "/dev/console", 2) or die "failed to open /dev/console: $!";
-
-    my $i_tables = 0;
-    each_index {
-	my $table_index = $::i;
-	if (!$_) {
-	    #- deallocate table
-	    ioctl($F, c::KDSKBENT(), pack("CCS", $table_index, 0, c::K_NOSUCHMAP())) or log::l("removing table $table_index failed: $!");
-	} else {
-	    each_index {
-		ioctl($F, c::KDSKBENT(), pack("CCS", $table_index, $::i, $_)) or log::l("keymap ioctl failed ($table_index $::i $_): $!");
-	    } @{$tables[$i_tables++]};
-	}
-    } @$tables_given;
-}
-
-sub parse_xkb_rules() {
-    my $cat;
-    my %l;
-    my $lst_file = "$::prefix/usr/X11R6/lib/X11/xkb/rules/xorg.lst";
-    foreach (cat_($lst_file)) {
-	next if m!^\s*//! || m!^\s*$!;
-	chomp;
-	if (/^\!\s*(\S+)$/) {
-	    $cat = $1;
-	} elsif (/^\s*(\w\S*)\s+(.*)/) {
-	    push @{$l{$cat}}, [ $1, $2 ];
-	} else {
-	    log::l("parse_xkb_rules:$lst_file: bad line $_");
-	}
-    }
-    \%l;
-}
-
-sub keyboard2full_xkb {
-    my ($keyboard) = @_;
-
-    my $XkbLayout = keyboard2xkb($keyboard) or return { XkbDisable => '' };
-
-    my $XkbModel = $keyboard->{XkbModel} ||
-      (arch() =~ /sparc/ ? 'sun' :
-	$XkbLayout eq 'jp' ? 'jp106' : 
-	$XkbLayout eq 'br' ? 'abnt2' : 'pc105');
-
-    {
-	XkbLayout => 
-	   $XkbLayout =~ /,/ ? $XkbLayout :
-	   join(',', if_($keyboard->{GRP_TOGGLE}, 'us'), $XkbLayout),
-	XkbModel => $XkbModel,
-	XkbOptions => join(',', 
-			   if_($keyboard->{GRP_TOGGLE},
-			       "grp:$keyboard->{GRP_TOGGLE}", 
-			       'grp_led:scroll'),
-			   if_($keyboard->{GRP_TOGGLE} ne 'rwin_toggle', 'compose:rwin'), 
-			   ),
-    };
-}
-
-sub xmodmap_file {
-    my ($keyboard) = @_;
-    my $KEYBOARD = $keyboard->{KEYBOARD};
-    my $f = "$ENV{SHARE_PATH}/xmodmap/xmodmap.$KEYBOARD";
-    if (! -e $f) {
-	eval {
-	    require packdrake;
-	    my $packer = new packdrake("$ENV{SHARE_PATH}/xmodmap.cz2", quiet => 1);
-	    $packer->extract_archive("/tmp", "xmodmap.$KEYBOARD");
-	};
-	$f = "/tmp/xmodmap.$KEYBOARD";
-    }
-    -e $f && $f;
-}
-
-sub setxkbmap {
-    my ($keyboard) = @_;
-    my $xkb = keyboard::keyboard2full_xkb($keyboard) or return;
-    run_program::run('setxkbmap', '-option', '') if $xkb->{XkbOptions}; #- need re-initialised other toggles are cumulated
-    run_program::run('setxkbmap', $xkb->{XkbLayout}, '-model' => $xkb->{XkbModel}, '-option' => $xkb->{XkbOptions} || '', '-compat' => $xkb->{XkbCompat} || '');
-}
-
-sub setup {
-    my ($keyboard) = @_;
-
-    return if arch() =~ /^sparc/;
-
-    #- Xpmac does not map keys quite right
-    if (arch() =~ /ppc/ && !$::testing && $ENV{DISPLAY}) {
-	log::l("Fixing Mac keyboard");
-	run_program::run('xmodmap', "-e",  "keycode 59 = BackSpace");
-	run_program::run('xmodmap', "-e",  "keycode 131 = Shift_R");
-	run_program::run('xmodmap', "-e",  "add shift = Shift_R");
-	return;
-    }
-
-    my $kmap = keyboard2kmap($keyboard) or return;
-
-    log::l("loading keymap $kmap");
-    if (-e (my $f = "$ENV{SHARE_PATH}/keymaps/$kmap.bkmap")) {
-	load(scalar cat_($f));
-    } elsif (-e (my $packed_kmaps = "$ENV{SHARE_PATH}/keymaps.cz2")) {
-	my $kid = bg_command->new(sub {
-	    eval {
-		require packdrake;
-		my $packer = new packdrake($packed_kmaps, quiet => 1);
-		$packer->extract_archive(undef, "$kmap.bkmap");
-	    };
-	});
-	local $/ = undef;
-	eval { my $fd = $kid->{fd}; load(join('', <$fd>)) };
-    } elsif (-x '/bin/loadkeys') {
-	run_program::run('loadkeys', $kmap);
-    } else {
-	log::l("ERROR: can not load keymap");
-    }
-
-    if (-x "/usr/X11R6/bin/setxkbmap") {
-	setxkbmap($keyboard);
-    } else {
-	my $f = xmodmap_file($keyboard);
-	eval { run_program::run('xmodmap', $f) } if $f && !$::testing && $ENV{DISPLAY};
-    }
-}
-
-sub write {
-    my ($keyboard) = @_;
-    log::l("keyboard::write $keyboard->{KEYBOARD}");
-
-    $keyboard = { %$keyboard };
-    delete $keyboard->{unsafe};
-    $keyboard->{KEYTABLE} = keyboard2kmap($keyboard);
-
-    setVarsInSh("$::prefix/etc/sysconfig/keyboard", $keyboard);
-    if (arch() =~ /ppc/) {
-	my $s = "dev.mac_hid.keyboard_sends_linux_keycodes = 1\n";
-	substInFile { 
-            $_ = '' if /^\Qdev.mac_hid.keyboard_sends_linux_keycodes/;
-            $_ .= $s if eof;
-        } "$::prefix/etc/sysctl.conf";
-    } else {
-	run_program::rooted($::prefix, 'dumpkeys', '>', '/etc/sysconfig/console/default.kmap') or log::l("dumpkeys failed");
-    }
-}
-
-sub read() {
-    my %keyboard = getVarsFromSh("$::prefix/etc/sysconfig/keyboard") or return;
-    if (!$keyboard{KEYBOARD}) {
-	add2hash(\%keyboard, grep { keyboard2kmap($_) eq $keyboard{KEYTABLE} } keyboards());
-    }
-    $keyboard{DISABLE_WINDOWS_KEY} = bool2yesno(detect_devices::isLaptop());
-
-    keyboard2text(\%keyboard) ? \%keyboard : {};
-}
-
-sub check() {
-    $^W = 0;
-
-    my $not_ok = 0;
-    my $warn = sub {
-	print STDERR "$_[0]\n";
-    };
-    my $err = sub {
-	&$warn;
-	$not_ok = 1;
-    };
-
-    if (my @l = grep { is_empty_array_ref(lang2keyboards($_)) } lang::list_langs()) {
-	$warn->("no keyboard for langs " . join(" ", @l));
-    }
-    foreach my $lang (lang::list_langs()) {
-	my $l = lang2keyboards($lang);
-	foreach (@$l) {
-	    0 <= $_->[1] && $_->[1] <= 100 or $err->("invalid value $_->[1] in $lang2keyboard{$lang} for $lang in \%lang2keyboard keyboard.pm");
-	    $keyboards{$_->[0]} or $err->("invalid keyboard $_->[0] in $lang2keyboard{$lang} for $lang in \%lang2keyboard keyboard.pm");
-	}
-    }
-    /SKIP/ || $keyboards{$_} or $err->("invalid keyboard $_ in \@usb2keyboard keyboard.pm") foreach @usb2keyboard;
-    $usb2keyboard[0x21] eq 'us_SKIP' or $err->('@usb2keyboard is badly modified, 0x21 is not us keyboard');
-
-    my @xkb_groups = map { if_(/grp:(\S+)/, $1) } cat_('/usr/lib/X11/xkb/rules/xfree86.lst');
-    $err->("invalid xkb group toggle '$_' in \%grp_toggles") foreach difference2([ keys %grp_toggles ], \@xkb_groups);
-    $warn->("unused xkb group toggle '$_'") foreach grep { !/switch/ } difference2(\@xkb_groups, [ keys %grp_toggles ]);
-
-    my @xkb_layouts = (#- (map { (split)[0] } grep { /^! layout/ .. /^\s*$/ } cat_('/usr/lib/X11/xkb/rules/xfree86.lst')),
-		       all('/usr/lib/X11/xkb/symbols'),
-		       (map { (split)[2] } cat_('/usr/lib/X11/xkb/symbols.dir')));
-    $err->("invalid xkb layout $_") foreach difference2([ map { keyboard2xkb($_) } keyboards() ], \@xkb_layouts);
-
-    my @kmaps_available = map { if_(m|.*/(.*)\.bkmap|, $1) } `tar tfj share/keymaps.tar.bz2`;
-    my @kmaps_wanted = map { keyboard2kmap($_) } keyboards();
-    $err->("missing KEYTABLE $_ (either share/keymaps.tar.bz2 need updating or $_ is bad)") foreach difference2(\@kmaps_wanted, \@kmaps_available);
-    $err->("unused KEYTABLE $_ (update share/keymaps.tar.bz2 using share/keymaps_generate)") foreach difference2(\@kmaps_available, \@kmaps_wanted);
-
-    loadkeys_files($err);
-
-    exit($not_ok);
-}
-
-1;
diff --git a/perl-install/lang.pm b/perl-install/lang.pm
deleted file mode 100644
index cf54cd29d..000000000
--- a/perl-install/lang.pm
+++ /dev/null
@@ -1,1363 +0,0 @@
-package lang; # $Id$
-
-use diagnostics;
-use strict;
-use common;
-use utf8;
-use log;
-
-#- key: lang name (locale name for some (~5) special cases needing
-#-      extra distinctions)
-#- [0]: lang name in english
-#- [1]: transliterated locale name in the locale name (used for sorting)
-#- [2]: default locale name to use for that language if there is not
-#-      an existing locale for the combination language+country choosen
-#- [3]: geographic groups that this language belongs to (for displaying
-#-      in the menu grouped in smaller lists), 1=Europe, 2=Asia, 3=Africa,
-#-      4=Oceania&Pacific, 5=America (if you wonder, it's the order
-#-      used in the olympic flag)
-#- [4]: special value for LANGUAGE variable (if different of the default
-#-      of 'll_CC:ll_DD:ll' (ll_CC: locale (if exist) resulting of the
-#-      combination of chosen lang (ll) and country (CC), ll_DD: the
-#-      default locale shown here (field [2]) and ll: the language (the key))
-our %langs = (
-'af' =>    [ 'Afrikaans',           'Afrikaans',         'af_ZA', '  3  ', 'iso-8859-1' ],
-'am' =>    [ 'Amharic',             'ZZ emarNa',         'am_ET', '  3  ', 'utf_ethi' ],
-'ar' =>    [ 'Arabic',              'AA Arabic',         'ar_EG', ' 23  ', 'utf_ar' ],
-'as' =>    [ 'Assamese',            'ZZ Assamese',       'as_IN', ' 2   ', 'utf_beng' ],
-'az' =>    [ 'Azeri (Latin)',       'Azerbaycanca',      'az_AZ', ' 2   ', 'utf_az' ],
-'be' =>    [ 'Belarussian',         'Belaruskaya',       'be_BY', '1    ', 'utf_cyr1' ],
-#- ber_MA not yet done, using fr_FR locale instead
-'ber' =>   [ 'Berber',              'ZZ Tamazight',      'fr_FR', '  3  ', 'utf_tfng', 'ber:fr' ],
-'bg' =>    [ 'Bulgarian',           'Blgarski',          'bg_BG', '1    ', 'cp1251' ],
-'bn' =>    [ 'Bengali',             'ZZ Bengali',        'bn_BD', ' 2   ', 'utf_beng' ],
-'br' =>    [ 'Breton',              'Brezhoneg',         'br_FR', '1    ', 'iso-8859-15', 'br:fr_FR:fr' ],
-'bs' =>    [ 'Bosnian',             'Bosanski',          'bs_BA', '1    ', 'iso-8859-2' ],
-'ca' =>    [ 'Catalan',             'Catala',            'ca_ES', '1    ', 'iso-8859-15', 'ca:es_ES:es' ],
-'cs' =>    [ 'Czech',               'Cestina',           'cs_CZ', '1    ', 'iso-8859-2' ],
-'cy' =>    [ 'Welsh',               'Cymraeg',           'cy_GB', '1    ', 'utf_lat8',    'cy:en_GB:en' ],
-'da' =>    [ 'Danish',              'Dansk',             'da_DK', '1    ', 'iso-8859-15' ],
-'de' =>    [ 'German',              'Deutsch',           'de_DE', '1    ', 'iso-8859-15' ],
-#-'dz' =>  [ 'Buthanese',           'ZZ Dzhonka',        'dz_BT', ' 2   ', 'unicode' ],
-'el' =>    [ 'Greek',               'Ellynika',          'el_GR', '1    ', 'iso-8859-7' ],
-'en_GB' => [ 'English',             'English',           'en_GB', '12345', 'iso-8859-15' ],
-'en_US' => [ 'English (American)', 'English (American)', 'en_US', '    5', 'C' ],
-'en_IE' => [ 'English (Ireland)',   'English (Ireland)', 'en_IE', '1    ', 'iso-8859-15', 'en_IE:en_GB:en' ],
-'eo' =>    [ 'Esperanto',           'Esperanto',         'eo_XX', '12345', 'unicode' ],
-'es' =>    [ 'Spanish',             'Espanol',           'es_ES', '1 3 5', 'iso-8859-15' ],
-'et' =>    [ 'Estonian',            'Eesti',             'et_EE', '1    ', 'iso-8859-15' ],
-'eu' =>    [ 'Euskara (Basque)',    'Euskara',           'eu_ES', '1    ', 'utf_lat1' ],
-'fa' =>    [ 'Farsi (Iranian)',     'AA Farsi',          'fa_IR', ' 2   ', 'utf_ar' ],
-'fi' =>    [ 'Finnish (Suomi)',     'Suomi',             'fi_FI', '1    ', 'iso-8859-15' ],
-'fo' =>    [ 'Faroese',             'Foroyskt',          'fo_FO', '1    ', 'utf_lat1' ],
-'fr' =>    [ 'French',              'Francais',          'fr_FR', '1 345', 'iso-8859-15' ],
-'fur' =>   [ 'Furlan',              'Furlan',            'fur_IT', '1    ', 'utf_lat1', 'fur:it_IT:it' ],
-'fy' =>    [ 'Frisian',             'Frysk',             'fy_NL',  '1    ', 'utf_lat1' ],
-'ga' =>    [ 'Gaelic (Irish)',      'Gaeilge',           'ga_IE', '1    ', 'utf_lat1', 'ga:en_IE:en_GB:en' ],
-#'gd' =>   [ 'Gaelic (Scottish)',   'Gaidhlig',          'gd_GB', '1    ', 'utf_lat8',    'gd:en_GB:en' ],
-'gl' =>    [ 'Galician',            'Galego',            'gl_ES', '1    ', 'iso-8859-15', 'gl:es_ES:es:pt:pt_BR' ],
-#- gn_PY not yet done, using es_PY locale instead
-'gn' =>    [ 'Guarani',             'Avane-e',           'es_PY', '    5', 'utf_lat1',    'gn:es_PY:es' ],
-'gu' =>    [ 'Gujarati',            'ZZ Gujarati',       'gu_IN', ' 2   ', 'unicode' ],
-#'gv' =>   [ 'Gaelic (Manx)',       'Gaelg',             'gv_GB', '1    ', 'utf_lat8',    'gv:en_GB:en' ],
-'he' =>    [ 'Hebrew',              'AA Ivrit',          'he_IL', ' 2   ', 'utf_he' ],
-'hi' =>    [ 'Hindi',               'ZZ Hindi',          'hi_IN', ' 2   ', 'utf_deva' ],
-'hr' =>    [ 'Croatian',            'Hrvatski',          'hr_HR', '1    ', 'iso-8859-2' ],
-'hu' =>    [ 'Hungarian',           'Magyar',            'hu_HU', '1    ', 'iso-8859-2' ],
-'hy' =>    [ 'Armenian',            'ZZ Armenian',       'hy_AM', ' 2   ', 'utf_armn' ],
-# locale not done yet
-#'ia' =>   [ 'Interlingua',         'Interlingua',       'ia_XX', '1   5', 'utf_lat1' ],
-'id' =>    [ 'Indonesian',          'Bahasa Indonesia',  'id_ID', ' 2   ', 'utf_lat1' ],
-'is' =>    [ 'Icelandic',           'Islenska',          'is_IS', '1    ', 'iso-8859-1' ],
-'it' =>    [ 'Italian',             'Italiano',          'it_IT', '1    ', 'iso-8859-15' ],
-'iu' =>    [ 'Inuktitut',           'ZZ Inuktitut',      'iu_CA', '    5', 'utf_iu' ],
-'ja' =>    [ 'Japanese',            'ZZ Nihongo',        'ja_JP', ' 2   ', 'jisx0208' ],
-'ka' =>    [ 'Georgian',            'ZZ Georgian',       'ka_GE', ' 2   ', 'utf_geor' ],
-'kl' =>    [ 'Greenlandic (inuit)', 'Kalaallisut',       'kl_GL', '    5', 'utf_lat1' ],
-'km' =>    [ 'Khmer',               'ZZ Khmer',          'km_KH', ' 2   ', 'utf_khmr' ],
-'kn' =>    [ 'Kannada',             'ZZ Kannada',        'kn_IN', ' 2   ', 'utf_knda' ],
-'ko' =>    [ 'Korean',              'ZZ Korea',          'ko_KR', ' 2   ', 'ksc5601' ],
-'ku' =>    [ 'Kurdish',             'Kurdi',             'ku_TR', ' 2   ', 'utf_lat5' ],
-#-'kw' =>  [ 'Cornish',             'Kernewek',          'kw_GB', '1    ', 'utf_lat8',    'kw:en_GB:en' ],
-'ky' =>    [ 'Kyrgyz',              'Kyrgyz',            'ky_KG', ' 2   ', 'utf_cyr2' ],
-#- lb_LU not yet done, using de_LU locale instead
-'lb' =>    [ 'Luxembourgish',       'Letzebuergesch',    'de_LU', '1    ', 'utf_lat1', 'lb:de_LU' ],
-'li' =>    [ 'Limbourgish',         'Limburgs',          'li_NL', '1    ', 'utf_lat1' ],
-'lo' =>    [ 'Laotian',             'Laotian',           'lo_LA', ' 2   ', 'utf_laoo' ],
-'lt' =>    [ 'Lithuanian',          'Lietuviskai',       'lt_LT', '1    ', 'iso-8859-13' ],
-#- ltg_LV locale not done yet, using lv_LV for now
-#- "ltg" is not a standard lang code, ISO-639 code was refused;
-#- LTG_LV should be used instead (uppercase is for non-standard
-#- langcodes, as defined by locale naming standard
-'ltg' =>   [ 'Latgalian',           'Latgalisu',         'lv_LV', '1    ', 'iso-8859-13', 'ltg:LTG:lv' ],
-'lv' =>    [ 'Latvian',             'Latviesu',          'lv_LV', '1    ', 'iso-8859-13' ],
-'mi' =>    [ 'Maori',               'Maori',             'mi_NZ', '   4 ', 'unicode' ],
-'mk' =>    [ 'Macedonian',          'Makedonski',        'mk_MK', '1    ', 'utf_cyr1' ],
-'ml' =>    [ 'Malayalam',           'ZZ Malayalam',      'ml_IN', ' 2   ', 'utf_mlym' ],
-'mn' =>    [ 'Mongolian',           'Mongol',            'mn_MN', ' 2   ', 'utf_cyr2' ],
-'mr' =>    [ 'Marathi',             'ZZ Marathi',        'mr_IN', ' 2   ', 'utf_deva' ],
-'ms' =>    [ 'Malay',               'Bahasa Melayu',     'ms_MY', ' 2   ', 'utf_lat1' ],
-'mt' =>    [ 'Maltese',             'Maltin',            'mt_MT', '1 3  ', 'unicode' ],
-'nb' =>    [ 'Norwegian Bokmaal',   'Norsk, Bokmal',     'nb_NO', '1    ', 'iso-8859-1',  'nb:no' ],
-'nds' =>   [ 'Low Saxon',           'Platduutsch',      'nds_DE', '1    ', 'utf_lat1', 'nds_DE:nds' ],
-'ne' =>    [ 'Nepali',              'ZZ Nepali',         'ne_NP', ' 2   ', 'unicode' ],
-'nl' =>    [ 'Dutch',               'Nederlands',        'nl_NL', '1    ', 'iso-8859-15' ],
-'nn' =>    [ 'Norwegian Nynorsk',   'Norsk, Nynorsk',    'nn_NO', '1    ', 'iso-8859-1',  'nn:no@nynorsk:no_NY:no:nb' ],
-'oc' =>    [ 'Occitan',             'Occitan',           'oc_FR', '1    ', 'utf_lat1',  'oc:fr_FR:fr' ],
-'pa_IN' => [ 'Punjabi (gurmukhi)',  'ZZ Punjabi',        'pa_IN', ' 2   ', 'utf_guru' ],
-#- 'tl' in priority position for now, as 'fil' is not much used.
-#- Monolingual window managers will not see the menus otherwise
-#- "ph_PH" should change to "fil_PH" in the future ("ph" is not
-#- standard lang code, "fil" is standard)
-'ph' =>    [ 'Filipino',            'Filipino',          'ph_PH', ' 2   ', 'utf_lat1',  'tl:fil' ],
-'pl' =>    [ 'Polish',              'Polski',            'pl_PL', '1    ', 'iso-8859-2' ],
-'pt' =>    [ 'Portuguese',          'Portugues',         'pt_PT', '1 3  ', 'iso-8859-15', 'pt_PT:pt:pt_BR' ],
-'pt_BR' => [ 'Portuguese Brazil', 'Portugues do Brasil', 'pt_BR', '    5', 'iso-8859-1',  'pt_BR:pt_PT:pt' ],
-#- qu_PE not yet done, using es_PE locale instead
-'qu' =>    [ 'Quichua',             'Runa Simi',         'es_PE', '    5', 'utf_lat1', 'qu:es_PE:es' ],
-'ro' =>    [ 'Romanian',            'Romana',            'ro_RO', '1    ', 'iso-8859-2' ],
-'ru' =>    [ 'Russian',             'Russkij',           'ru_RU', '12   ', 'koi8-u' ],
-'sc' =>    [ 'Sardinian',           'Sardu',             'sc_IT', '1    ', 'utf_lat1', 'sc:it_IT:it' ],
-'se' =>    [ 'Saami',               'Samegiella',        'se_NO', '1    ', 'unicode' ], 
-'sk' =>    [ 'Slovak',              'Slovencina',        'sk_SK', '1    ', 'iso-8859-2' ],
-'sl' =>    [ 'Slovenian',           'Slovenscina',       'sl_SI', '1    ', 'iso-8859-2' ],
-'sq' =>    [ 'Albanian',            'Shqip',             'sq_AL', '1    ', 'iso-8859-1' ], 
-'sr' =>    [ 'Serbian Cyrillic',    'Srpska',            'sr_CS', '1    ', 'utf_cyr1', 'sp:sr' ],
-#- "sh" comes first, because otherwise, due to the way glibc does language
-#- fallback, if "sr@Latn" is not there but a "sr" (whichs uses cyrillic)
-#- is there, "sh" will never be used.
-'sr@Latn' => [ 'Serbian Latin',     'Srpska',            'sr_CS', '1    ', 'unicode',  'sh:sr@Latn' ], 
-#- ss_ZA not yet done, using en_ZA locale instead
-'ss' =>    [ 'Swati',               'SiSwati',           'en_ZA', '  3  ', 'utf_lat1', 'ss:en_ZA' ],
-'st' =>    [ 'Sotho',               'Sesotho',           'st_ZA', '  3  ', 'utf_lat1', 'st:nso:en_ZA' ],
-'sv' =>    [ 'Swedish',             'Svenska',           'sv_SE', '1    ', 'iso-8859-1' ],
-'ta' =>    [ 'Tamil',               'ZZ Tamil',          'ta_IN', ' 2   ', 'utf_taml' ],
-'te' =>    [ 'Telugu',              'ZZ Telugu',         'te_IN', ' 2   ', 'unicode' ],
-'tg' =>    [ 'Tajik',               'Tojiki',            'tg_TJ', ' 2   ', 'utf_cyr2' ],
-'th' =>    [ 'Thai',                'ZZ Thai',           'th_TH', ' 2   ', 'tis620' ],
-'tk' =>    [ 'Turkmen',             'Turkmence',         'tk_TM', ' 2   ', 'utf_az' ],
-'tr' =>    [ 'Turkish',             'Turkce',            'tr_TR', '12   ', 'iso-8859-9' ],
-'tt' =>    [ 'Tatar',               'Tatarca',           'tt_RU', ' 2   ', 'utf_lat5' ],
-#- ug_CN locale not done yet, using ar_EG locale instead
-'ug' =>    [ 'Uyghur',              'AA Uyghur',         'ar_EG', ' 2   ', 'utf_ar', 'ug' ],  
-'uk' =>    [ 'Ukrainian',           'Ukrayinska',        'uk_UA', '1    ', 'koi8-u' ],
-'ur' =>    [ 'Urdu',                'AA Urdu',           'ur_PK', ' 2   ', 'utf_ar' ],  
-'uz@Latn' => [ 'Uzbek (latin)',     'Ozbekcha',          'uz_UZ', ' 2   ', 'utf_cyr2', 'uz@Latn:uz' ],
-'uz' =>    [ 'Uzbek (cyrillic)',    'Ozbekcha',          'uz_UZ', ' 2   ', 'utf_cyr2', 'uz@Cyrl:uz' ],
-#- ve_ZA not yet done, using en_ZA locale instead
-'ve' =>    [ 'Venda',               'Venda',             'en_ZA', '  3  ', 'utf_lat1', 've:ven:en_ZA' ],
-'vi' =>    [ 'Vietnamese',          'Tieng Viet',        'vi_VN', ' 2   ', 'utf_vi' ],
-'wa' =>    [ 'Walon',               'Walon',             'wa_BE', '1    ', 'utf_lat1', 'wa:fr_BE:fr' ],
-#- locale not done yet
-#'wen' =>   [ 'Sorbian',             'XX Sorbian',       'wen_XX', '1    ', 'utf_lat1' ],
-'xh' =>    [ 'Xhosa',               'IsiXhosa',          'xh_ZA', '  3  ', 'utf_lat1', 'xh:en_ZA' ],
-'yi' =>    [ 'Yiddish',             'AA Yidish',         'yi_US', '1    ', 'utf_he' ],
-'zh_CN' => [ 'Chinese Simplified',  'ZZ ZhongWen',       'zh_CN', ' 2   ', 'gb2312',      'zh_CN.GBK:zh_CN.GB2312:zh_CN:zh' ],
-'zh_TW' => [ 'Chinese Traditional', 'ZZ ZhongWen',       'zh_TW', ' 2   ', 'Big5',        'zh_TW.Big5:zh_TW:zh_HK:zh' ],
-'zu' =>    [ 'Zulu',                 'IsiZulu',          'zu_ZA', '  3  ', 'utf_lat1', 'xh:en_ZA' ],
-);
-sub l2name           { exists $langs{$_[0]} && $langs{$_[0]}[0] }
-sub l2transliterated { exists $langs{$_[0]} && $langs{$_[0]}[1] }
-sub l2locale         { exists $langs{$_[0]} && $langs{$_[0]}[2] }
-sub l2location {
-    my %geo = (1 => 'Europe', 2 => 'Asia', 3 => 'Africa', 4 => 'Oceania/Pacific', 5 => 'America');
-    map { if_($langs{$_[0]}[3] =~ $_, $geo{$_}) } 1..5;
-}
-sub l2charset        { exists $langs{$_[0]} && $langs{$_[0]}[4] }
-sub l2language       { exists $langs{$_[0]} && $langs{$_[0]}[5] }
-sub list_langs {
-    my (%options) = @_;
-    my @l = keys %langs;
-    $options{exclude_non_installed} ? grep { -e "/usr/share/locale/" . l2locale($_) . "/LC_CTYPE" } @l : @l;
-}
-
-sub text_direction_rtl() {
-#-PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#-PO: or as "default:RTL", depending if your language is written from
-#-PO: left to right, or from right to left; any other string is wrong.
-       	N("default:LTR") eq "default:RTL";
-}
-
-
-#- key: country name (that should be YY in xx_YY locale)
-#- [0]: country name in natural language
-#- [1]: default locale for that country 
-#- [2]: geographic groups that this country belongs to (for displaying
-#-      in the menu grouped in smaller lists), 1=Europe, 2=Asia, 3=Africa,
-#-      4=Oceania&Pacific, 5=America (if you wonder, it's the order
-#-      used in the olympic flag)
-#-
-#- Note: for countries for which a glibc locale do not exist (yet) I tried to
-#- put a locale that makes sense; and a '#' at the end of the line to show
-#- the locale is not the "correct" one. 'en_US' is used when no good choice
-#- is available.
-my %countries = (
-'AD' => [ N_("Andorra"),        'ca_ES', '1' ], #
-'AE' => [ N_("United Arab Emirates"), 'ar_AE', '2' ],
-'AF' => [ N_("Afghanistan"),    'en_US', '2' ], #
-'AG' => [ N_("Antigua and Barbuda"), 'en_US', '5' ], #
-'AI' => [ N_("Anguilla"),       'en_US', '5' ], #
-'AL' => [ N_("Albania"),        'sq_AL', '1' ],
-'AM' => [ N_("Armenia"),        'hy_AM', '2' ],
-'AN' => [ N_("Netherlands Antilles"), 'en_US', '5' ], #
-'AO' => [ N_("Angola"),         'pt_PT', '3' ], #
-'AQ' => [ N_("Antarctica"),     'en_US', '4' ], #
-'AR' => [ N_("Argentina"),      'es_AR', '5' ],
-'AS' => [ N_("American Samoa"), 'en_US', '4' ], #
-'AT' => [ N_("Austria"),        'de_AT', '1' ],
-'AU' => [ N_("Australia"),      'en_AU', '4' ],
-'AW' => [ N_("Aruba"),          'en_US', '5' ], #
-'AZ' => [ N_("Azerbaijan"),     'az_AZ', '1' ],
-'BA' => [ N_("Bosnia and Herzegovina"), 'bs_BA', '1' ],
-'BB' => [ N_("Barbados"),       'en_US', '5' ], #
-'BD' => [ N_("Bangladesh"),     'bn_BD', '2' ],
-'BE' => [ N_("Belgium"),        'fr_BE', '1' ],
-'BF' => [ N_("Burkina Faso"),   'en_US', '3' ], #
-'BG' => [ N_("Bulgaria"),       'bg_BG', '1' ],
-'BH' => [ N_("Bahrain"),        'ar_BH', '2' ],
-'BI' => [ N_("Burundi"),        'en_US', '3' ], #
-'BJ' => [ N_("Benin"),          'fr_FR', '3' ], #
-'BM' => [ N_("Bermuda"),        'en_US', '5' ], #
-'BN' => [ N_("Brunei Darussalam"), 'ar_EG', '2' ], #
-'BO' => [ N_("Bolivia"),        'es_BO', '5' ],
-'BR' => [ N_("Brazil"),         'pt_BR', '5' ],
-'BS' => [ N_("Bahamas"),        'en_US', '5' ], #
-'BT' => [ N_("Bhutan"),         'en_IN', '2' ], # dz_BT
-'BV' => [ N_("Bouvet Island"),  'en_US', '3' ], #
-'BW' => [ N_("Botswana"),       'en_BW', '3' ],
-'BY' => [ N_("Belarus"),        'be_BY', '1' ],
-'BZ' => [ N_("Belize"),         'en_US', '5' ], #
-'CA' => [ N_("Canada"),         'en_CA', '5' ],
-'CC' => [ N_("Cocos (Keeling) Islands"), 'en_US', '4' ], #
-'CD' => [ N_("Congo (Kinshasa)"), 'fr_FR', '3' ], #
-'CF' => [ N_("Central African Republic"), 'fr_FR', '3' ], #
-'CG' => [ N_("Congo (Brazzaville)"), 'fr_FR', '3' ], #
-'CH' => [ N_("Switzerland"),    'de_CH', '1' ],
-'CI' => [ N_("Cote d'Ivoire"),  'fr_FR', '3' ], #
-'CK' => [ N_("Cook Islands"),   'en_US', '4' ], #
-'CL' => [ N_("Chile"),          'es_CL', '5' ],
-'CM' => [ N_("Cameroon"),       'fr_FR', '3' ], #
-'CN' => [ N_("China"),          'zh_CN', '2' ],
-'CO' => [ N_("Colombia"),       'es_CO', '5' ],
-'CR' => [ N_("Costa Rica"),     'es_CR', '5' ],
-'CS' => [ N_("Serbia & Montenegro"), 'sr_CS', '1' ],
-'CU' => [ N_("Cuba"),           'es_DO', '5' ], #
-'CV' => [ N_("Cape Verde"),     'pt_PT', '3' ], #
-'CX' => [ N_("Christmas Island"), 'en_US', '4' ], #
-'CY' => [ N_("Cyprus"),         'en_US', '1' ], #
-'CZ' => [ N_("Czech Republic"), 'cs_CZ', '2' ],
-'DE' => [ N_("Germany"),        'de_DE', '1' ],
-'DJ' => [ N_("Djibouti"),       'en_US', '3' ], #
-'DK' => [ N_("Denmark"),        'da_DK', '1' ],
-'DM' => [ N_("Dominica"),       'en_US', '5' ], #
-'DO' => [ N_("Dominican Republic"), 'es_DO', '5' ],
-'DZ' => [ N_("Algeria"),        'ar_DZ', '3' ],
-'EC' => [ N_("Ecuador"),        'es_EC', '5' ],
-'EE' => [ N_("Estonia"),        'et_EE', '1' ],
-'EG' => [ N_("Egypt"),          'ar_EG', '3' ],
-'EH' => [ N_("Western Sahara"), 'ar_MA', '3' ], #
-'ER' => [ N_("Eritrea"),        'ti_ER', '3' ],
-'ES' => [ N_("Spain"),          'es_ES', '1' ],
-'ET' => [ N_("Ethiopia"),       'am_ET', '3' ],
-'FI' => [ N_("Finland"),        'fi_FI', '1' ],
-'FJ' => [ N_("Fiji"),           'en_US', '4' ], #
-'FK' => [ N_("Falkland Islands (Malvinas)"), 'en_GB', '5' ], #
-'FM' => [ N_("Micronesia"),     'en_US', '4' ], #
-'FO' => [ N_("Faroe Islands"),  'fo_FO', '1' ],
-'FR' => [ N_("France"),         'fr_FR', '1' ],
-'GA' => [ N_("Gabon"),          'fr_FR', '3' ], #
-'GB' => [ N_("United Kingdom"), 'en_GB', '1' ],
-'GD' => [ N_("Grenada"),        'en_US', '5' ], #
-'GE' => [ N_("Georgia"),        'ka_GE', '2' ],
-'GF' => [ N_("French Guiana"),  'fr_FR', '5' ], #
-'GH' => [ N_("Ghana"),          'en_GB', '3' ], #
-'GI' => [ N_("Gibraltar"),      'en_GB', '1' ], #
-'GL' => [ N_("Greenland"),      'kl_GL', '5' ],
-'GM' => [ N_("Gambia"),         'en_US', '3' ], #
-'GN' => [ N_("Guinea"),         'en_US', '3' ], #
-'GP' => [ N_("Guadeloupe"),     'fr_FR', '5' ], #
-'GQ' => [ N_("Equatorial Guinea"), 'en_US', '3' ], #
-'GR' => [ N_("Greece"),         'el_GR', '1' ],
-'GS' => [ N_("South Georgia and the South Sandwich Islands"), 'en_US', '4' ], #
-'GT' => [ N_("Guatemala"),      'es_GT', '5' ],
-'GU' => [ N_("Guam"),           'en_US', '4' ], #
-'GW' => [ N_("Guinea-Bissau"),  'pt_PT', '3' ], #
-'GY' => [ N_("Guyana"),         'en_US', '5' ], #
-'HK' => [ N_("Hong Kong SAR (China)"),      'zh_HK', '2' ],
-'HM' => [ N_("Heard and McDonald Islands"), 'en_US', '4' ], #
-'HN' => [ N_("Honduras"),       'es_HN', '5' ],
-'HR' => [ N_("Croatia"),        'hr_HR', '1' ],
-'HT' => [ N_("Haiti"),          'fr_FR', '5' ], #
-'HU' => [ N_("Hungary"),        'hu_HU', '1' ],
-'ID' => [ N_("Indonesia"),      'id_ID', '2' ],
-'IE' => [ N_("Ireland"),        'en_IE', '1' ],
-'IL' => [ N_("Israel"),         'he_IL', '2' ],
-'IN' => [ N_("India"),          'hi_IN', '2' ],
-'IO' => [ N_("British Indian Ocean Territory"), 'en_GB', '2' ], #
-'IQ' => [ N_("Iraq"),           'ar_IQ', '2' ],
-'IR' => [ N_("Iran"),           'fa_IR', '2' ],
-'IS' => [ N_("Iceland"),        'is_IS', '1' ],
-'IT' => [ N_("Italy"),          'it_IT', '1' ],
-'JM' => [ N_("Jamaica"),        'en_US', '5' ], #
-'JO' => [ N_("Jordan"),         'ar_JO', '2' ],
-'JP' => [ N_("Japan"),          'ja_JP', '2' ],
-'KE' => [ N_("Kenya"),          'en_ZW', '3' ], #
-'KG' => [ N_("Kyrgyzstan"),     'ky_KG', '2' ],
-'KH' => [ N_("Cambodia"),       'km_KH', '2' ],
-'KI' => [ N_("Kiribati"),       'en_US', '3' ], #
-'KM' => [ N_("Comoros"),        'en_US', '2' ], #
-'KN' => [ N_("Saint Kitts and Nevis"), 'en_US', '5' ], #
-'KP' => [ N_("Korea (North)"),  'ko_KR', '2' ], #
-'KR' => [ N_("Korea"),          'ko_KR', '2' ],
-'KW' => [ N_("Kuwait"),         'ar_KW', '2' ],
-'KY' => [ N_("Cayman Islands"), 'en_US', '5' ], #
-'KZ' => [ N_("Kazakhstan"),     'ru_RU', '2' ], #
-'LA' => [ N_("Laos"),           'lo_LA', '2' ],
-'LB' => [ N_("Lebanon"),        'ar_LB', '2' ],
-'LC' => [ N_("Saint Lucia"),    'en_US', '5' ], #
-'LI' => [ N_("Liechtenstein"),  'de_CH', '1' ], #
-'LK' => [ N_("Sri Lanka"),      'en_IN', '2' ], #
-'LR' => [ N_("Liberia"),        'en_US', '3' ], #
-'LS' => [ N_("Lesotho"),        'en_BW', '3' ], #
-'LT' => [ N_("Lithuania"),      'lt_LT', '1' ],
-'LU' => [ N_("Luxembourg"),     'de_LU', '1' ], # lb_LU
-'LV' => [ N_("Latvia"),         'lv_LV', '1' ],
-'LY' => [ N_("Libya"),          'ar_LY', '3' ],
-'MA' => [ N_("Morocco"),        'ar_MA', '3' ],
-'MC' => [ N_("Monaco"),         'fr_FR', '1' ], #
-'MD' => [ N_("Moldova"),        'ro_RO', '1' ], #
-'MG' => [ N_("Madagascar"),     'fr_FR', '3' ], #
-'MH' => [ N_("Marshall Islands"), 'en_US', '4' ], #
-'MK' => [ N_("Macedonia"),      'mk_MK', '1' ],
-'ML' => [ N_("Mali"),           'en_US', '3' ], #
-'MM' => [ N_("Myanmar"),        'en_US', '2' ], #
-'MN' => [ N_("Mongolia"),       'mn_MN', '2' ],
-'MP' => [ N_("Northern Mariana Islands"), 'en_US', '2' ], #
-'MQ' => [ N_("Martinique"),     'fr_FR', '5' ], #
-'MR' => [ N_("Mauritania"),     'en_US', '3' ], #
-'MS' => [ N_("Montserrat"),     'en_US', '5' ], #
-'MT' => [ N_("Malta"),          'mt_MT', '1' ],
-'MU' => [ N_("Mauritius"),      'en_US', '3' ], #
-'MV' => [ N_("Maldives"),       'en_US', '4' ], #
-'MW' => [ N_("Malawi"),         'en_US', '3' ], #
-'MX' => [ N_("Mexico"),         'es_MX', '5' ],
-'MY' => [ N_("Malaysia"),       'ms_MY', '2' ],
-'MZ' => [ N_("Mozambique"),     'pt_PT', '3' ], #
-'NA' => [ N_("Namibia"),        'en_US', '3' ], #
-'NC' => [ N_("New Caledonia"),  'fr_FR', '4' ], #
-'NE' => [ N_("Niger"),          'en_US', '3' ], #
-'NF' => [ N_("Norfolk Island"), 'en_GB', '4' ], #
-'NG' => [ N_("Nigeria"),        'en_US', '3' ], #
-'NI' => [ N_("Nicaragua"),      'es_NI', '5' ],
-'NL' => [ N_("Netherlands"),    'nl_NL', '1' ],
-'NO' => [ N_("Norway"),         'nb_NO', '1' ],
-'NP' => [ N_("Nepal"),          'ne_NP', '2' ],
-'NR' => [ N_("Nauru"),          'en_US', '4' ], #
-'NU' => [ N_("Niue"),           'en_US', '4' ], #
-'NZ' => [ N_("New Zealand"),    'en_NZ', '4' ],
-'OM' => [ N_("Oman"),           'ar_OM', '2' ],
-'PA' => [ N_("Panama"),         'es_PA', '5' ],
-'PE' => [ N_("Peru"),           'es_PE', '5' ],
-'PF' => [ N_("French Polynesia"), 'fr_FR', '4' ], #
-'PG' => [ N_("Papua New Guinea"), 'en_NZ', '4' ], #
-'PH' => [ N_("Philippines"),    'ph_PH', '2' ],
-'PK' => [ N_("Pakistan"),       'ur_PK', '2' ],
-'PL' => [ N_("Poland"),         'pl_PL', '1' ],
-'PM' => [ N_("Saint Pierre and Miquelon"), 'fr_CA', '5' ], #
-'PN' => [ N_("Pitcairn"),      'en_US', '4' ], #
-'PR' => [ N_("Puerto Rico"),    'es_PR', '5' ],
-'PS' => [ N_("Palestine"),      'ar_JO', '2' ], #
-'PT' => [ N_("Portugal"),       'pt_PT', '1' ],
-'PY' => [ N_("Paraguay"),       'es_PY', '5' ],
-'PW' => [ N_("Palau"),          'en_US', '2' ], #
-'QA' => [ N_("Qatar"),          'ar_QA', '2' ],
-'RE' => [ N_("Reunion"),        'fr_FR', '2' ], #
-'RO' => [ N_("Romania"),        'ro_RO', '1' ],
-'RU' => [ N_("Russia"),         'ru_RU', '1' ],
-'RW' => [ N_("Rwanda"),         'fr_FR', '3' ], # rw_RW
-'SA' => [ N_("Saudi Arabia"),   'ar_SA', '2' ],
-'SB' => [ N_("Solomon Islands"), 'en_US', '4' ], #
-'SC' => [ N_("Seychelles"),     'en_US', '4' ], #
-'SD' => [ N_("Sudan"),          'ar_SD', '5' ],
-'SE' => [ N_("Sweden"),         'sv_SE', '1' ],
-'SG' => [ N_("Singapore"),      'en_SG', '2' ],
-'SH' => [ N_("Saint Helena"),   'en_GB', '5' ], #
-'SI' => [ N_("Slovenia"),       'sl_SI', '1' ],
-'SJ' => [ N_("Svalbard and Jan Mayen Islands"), 'en_US', '1' ], #
-'SK' => [ N_("Slovakia"),       'sk_SK', '1' ],
-'SL' => [ N_("Sierra Leone"),   'en_US', '3' ], #
-'SM' => [ N_("San Marino"),     'it_IT', '1' ], #
-'SN' => [ N_("Senegal"),        'fr_FR', '3' ], #
-'SO' => [ N_("Somalia"),        'en_US', '3' ], # so_SO
-'SR' => [ N_("Suriname"),       'nl_NL', '5' ], #
-'ST' => [ N_("Sao Tome and Principe"), 'en_US', '5' ], #
-'SV' => [ N_("El Salvador"),    'es_SV', '5' ],
-'SY' => [ N_("Syria"),          'ar_SY', '2' ],
-'SZ' => [ N_("Swaziland"),      'en_BW', '3' ], #
-'TC' => [ N_("Turks and Caicos Islands"), 'en_US', '5' ], #
-'TD' => [ N_("Chad"),           'en_US', '3' ], #
-'TF' => [ N_("French Southern Territories"), 'fr_FR', '4' ], #
-'TG' => [ N_("Togo"),           'fr_FR', '3' ], #
-'TH' => [ N_("Thailand"),       'th_TH', '2' ],
-'TJ' => [ N_("Tajikistan"),     'tg_TJ', '2' ],
-'TK' => [ N_("Tokelau"),        'en_US', '4' ], #
-'TL' => [ N_("East Timor"),     'pt_PT', '4' ], #
-'TM' => [ N_("Turkmenistan"),   'tk_TM', '2' ],
-'TN' => [ N_("Tunisia"),        'ar_TN', '5' ],
-'TO' => [ N_("Tonga"),          'en_US', '3' ], #
-'TR' => [ N_("Turkey"),         'tr_TR', '2' ],
-'TT' => [ N_("Trinidad and Tobago"), 'en_US', '5' ], #
-'TV' => [ N_("Tuvalu"),         'en_US', '4' ], #
-'TW' => [ N_("Taiwan"),         'zh_TW', '2' ],
-'TZ' => [ N_("Tanzania"),       'en_US', '3' ], #
-'UA' => [ N_("Ukraine"),        'uk_UA', '1' ],
-'UG' => [ N_("Uganda"),         'en_US', '3' ], # lug_UG
-'UM' => [ N_("United States Minor Outlying Islands"), 'en_US', '5' ], #
-'US' => [ N_("United States"),  'en_US', '5' ],
-'UY' => [ N_("Uruguay"),        'es_UY', '5' ],
-'UZ' => [ N_("Uzbekistan"),     'uz_UZ', '2' ],
-'VA' => [ N_("Vatican"),        'it_IT', '1' ], #
-'VC' => [ N_("Saint Vincent and the Grenadines"), 'en_US', '5' ], 
-'VE' => [ N_("Venezuela"),      'es_VE', '5' ],
-'VG' => [ N_("Virgin Islands (British)"), 'en_GB', '5' ], #
-'VI' => [ N_("Virgin Islands (U.S.)"), 'en_US', '5' ], #
-'VN' => [ N_("Vietnam"),        'vi_VN', '2' ],
-'VU' => [ N_("Vanuatu"),        'en_US', '4' ], #
-'WF' => [ N_("Wallis and Futuna"), 'fr_FR', '4' ], #
-'WS' => [ N_("Samoa"),          'en_US', '4' ], #
-'YE' => [ N_("Yemen"),          'ar_YE', '2' ],
-'YT' => [ N_("Mayotte"),        'fr_FR', '3' ], #
-'ZA' => [ N_("South Africa"),   'en_ZA', '5' ],
-'ZM' => [ N_("Zambia"),         'en_US', '3' ], #
-'ZW' => [ N_("Zimbabwe"),       'en_ZW', '5' ],
-);
-sub c2name   { exists $countries{$_[0]} && translate($countries{$_[0]}[0]) }
-sub c2locale { exists $countries{$_[0]} && $countries{$_[0]}[1] }
-sub list_countries {
-    my (%options) = @_;
-    my @l = keys %countries;
-    $options{exclude_non_installed} ? grep { -e "/usr/share/locale/" . c2locale($_) . "/LC_CTYPE" } @l : @l;
-}
-
-#- this list is built with the following command on the compile cluster:
-#- rpm -qpl /RPMS/locales-* | grep LC_CTYPE | cut -d'/' -f5 | grep '_' | grep -v '\.' | sort | tr '\n' ' ' ; echo
-our @locales = qw(af_ZA am_ET an_ES ar_AE ar_BH ar_DZ ar_EG ar_IN ar_IQ ar_JO ar_KW ar_LB ar_LY ar_MA ar_OM ar_QA ar_SA ar_SD ar_SY ar_TN ar_YE as_IN az_AZ be_BY bg_BG bn_BD bn_IN br_FR bs_BA ca_ES cs_CZ cy_GB da_DK de_AT de_BE de_CH de_DE de_LU el_GR en_AU en_BE en_BW en_CA en_DK en_GB en_HK en_IE en_IN en_NZ en_PH en_SG en_US en_ZA en_ZW eo_XX es_AR es_BO es_CL es_CO es_CR es_DO es_EC es_ES es_GT es_HN es_MX es_NI es_PA es_PE es_PR es_PY es_SV es_US es_UY es_VE et_EE eu_ES fa_IR fi_FI fo_FO fr_BE fr_CA fr_CH fr_FR fr_LU fur_IT fy_DE fy_NL ga_IE gd_GB gez_ER gez_ER@abegede gez_ET gez_ET@abegede gl_ES gu_IN gv_GB he_IL hi_IN hr_HR hu_HU hy_AM id_ID ik_CA is_IS it_CH it_IT iu_CA ja_JP ka_GE kl_GL km_KH kn_IN ko_KR ku_TR kw_GB ky_KG li_BE li_NL lo_LA lt_LT lv_LV mi_NZ mk_MK ml_IN mn_MN mr_IN ms_MY mt_MT nb_NO nds_DE nds_DE@traditional nds_NL ne_NP nl_BE nl_NL nn_NO no_NO oc_FR om_ET om_KE pa_IN ph_PH pl_PL pt_BR pt_PT ro_RO ru_RU ru_UA sc_IT se_NO sid_ET sk_SK sl_SI sq_AL sr_CS sr_CS@Latn sr_YU sr_YU@Latn st_ZA sv_FI sv_SE sw_XX ta_IN te_IN tg_TJ th_TH ti_ER ti_ET tig_ER tk_TM tl_PH tr_TR tt_RU uk_UA ur_PK uz_UZ uz_UZ@Cyrl uz_UZ@Latn vi_VN wa_BE xh_ZA yi_US zh_CN zh_HK zh_SG zh_TW zu_ZA);
-	
-sub standard_locale {
-    my ($lang, $country, $prefer_lang) = @_;
-    member("${lang}_${country}", @locales) and return "${lang}_${country}";
-    $prefer_lang && member($lang, @locales) and return $lang;
-    my $main_locale = locale_to_main_locale($lang);
-    if ($main_locale ne $lang) {
-	standard_locale($main_locale, $country, $prefer_lang);
-    }
-    '';
-}
-
-sub fix_variant {
-    my ($locale) = @_;
-    #- uz@Cyrl_UZ -> uz_UZ@Cyrl
-    $locale =~ s/(.*)(\@\w+)(_.*)/$1$3$2/;
-    $locale;
-}
-
-sub analyse_locale_name {
-    my ($locale) = @_;
-    $locale =~ /^(.*?) (?:_(.*?))? (?:\.(.*?))? (?:\@(.*?))? $/x &&
-      { main => $1, country => $2, charset => $3, variant => $4 };
-}
-
-sub locale_to_main_locale {
-    my ($locale) = @_;
-    lc(analyse_locale_name($locale)->{main});
-}
-
-sub getlocale_for_lang {
-    my ($lang, $country, $o_utf8) = @_;
-    fix_variant((standard_locale($lang, $country, 'prefer_lang') || l2locale($lang)) . ($o_utf8 ? '.UTF-8' : ''));
-}
-
-sub getlocale_for_country {
-    my ($lang, $country, $o_utf8) = @_;
-    fix_variant((standard_locale($lang, $country, '') || c2locale($country)) . ($o_utf8 ? '.UTF-8' : ''));
-}
-
-sub getLANGUAGE {
-    my ($lang, $o_country, $o_utf8) = @_;
-    l2language($lang) || join(':', uniq(getlocale_for_lang($lang, $o_country, $o_utf8), 
-					$lang, 
-					locale_to_main_locale($lang)));
-}
-
-#-------------------------------------------------------------
-#
-# IM configuration hash tables
-#
-# in order to configure an IM, one has to:
-# - put generic configuration in %IM_config
-# - put locale specific configuration in %IM_XIM_program
-
-
-# This set XIM_PROGRAM field for IM that needs a different value
-# depending on locale:
-my %IM_XIM_program =
-  (
-   chinput => {
-               'zh_CN' => 'chinput -gb',
-               'zh_CN.UTF-8' => 'chinput -gb',
-               'zh_HK' => 'chinput -big5',
-               'zh_HK.UTF-8' => 'chinput -big5',
-               'en_SG' => 'chinput -gb',
-               'en_SG.UTF-8' => 'chinput -gb',
-               'zh_TW' => 'chinput -big5',
-               'zh_TW.UTF-8' => 'chinput -big5',
-              },
-   xcin => {
-            'zh_TW' => 'xcin'
-           },
-  );
-
-# This set generic IM fields.
-#
-#- XMODIFIERS is the environnement variable used by the X11 XIM protocol
-#-	it is of the form XIMODIFIERS="@im=foo"
-#- XIM is used by some programs, it usually is the like XIMODIFIERS
-#-	with the "@im=" part stripped
-#- GTK_IM_MODULE the module to use for Gtk programs ("xim" to use an X11
-#-	XIM server; or a a native gtk module if exists)
-#- XIM_PROGRAM the program to run (usually the same as XIM value, but
-#-	in some cases different, particularly if parameters are needed;
-#-	If it is locale dependent it should be defined in %IM_XIM_program)
-my %IM_config =
-  (
-   ami => {
-           XIM => 'Ami',
-           #- NOTE: there are several possible versions of ami, for the different
-           #- desktops (kde, gnome, etc). So XIM_PROGRAM is not defined; it will
-           #- be the xinitrc script, XIM section, that will choose the right one 
-           #- XIM_PROGRAM => 'ami',
-           XMODIFIERS => '@im=Ami',
-           GTK_IM_MODULE => 'xim',
-          },
-   chinput => {
-               GTK_IM_MODULE => 'xim',
-               XIM => 'chinput',
-               # bogus entry overwriten by %IM_XIM_program, just for read()
-               XIM_PROGRAM => 'chinput',
-               XMODIFIERS => '@im=Chinput',
-               },
-   fcitx => {
-             XIM => 'fcitx',
-             XIM_PROGRAM => 'fcitx',
-             XMODIFIERS => '@im=fcitx',
-            },
-   gcin => {
-             GTK_IM_MODULE => 'gcin',
-             XIM => 'gcin',
-             XIM_PROGRAM => 'gcin',
-             XMODIFIERS => '@im=gcin',
-            },
-   iiimf => {
-             GTK_IM_MODULE => 'iiim',
-             XIM => 'iiimx',
-             XIM_PROGRAM => 'iiimx',
-             XMODIFIERS => '@im=iiimx',
-            },
-   'im-ja' => {
-               GTK_IM_MODULE => 'im-ja',
-               XIM => 'im-ja-xim-server',
-               XIM_PROGRAM => 'im-ja-xim-server',
-               XMODIFIERS => '@im=im-ja-xim-server',
-              },
-
-   kinput2 => {   
-               XIM => 'kinput2',
-               XIM_PROGRAM => 'kinput2',
-               XMODIFIERS => '@im=kinput2',
-              },
-   nabi => {
-            GTK_IM_MODULE => 'xim',
-            XIM => 'nabi',
-            XIM_PROGRAM => 'nabi',
-            XMODIFIERS => '@im=nabi',
-           },
-
-   scim => {
-            GTK_IM_MODULE => 'scim',
-            XIM_PROGRAM => 'scim -d',
-            XMODIFIERS => '@im=SCIM',
-           },
-   skim => {
-            GTK_IM_MODULE => 'scim',
-            XIM_PROGRAM => 'skim -d',
-            XMODIFIERS => '@im=SCIM',
-           },
-   uim => {
-           GTK_IM_MODULE => 'uim',
-           XIM => 'uim',
-           XIM_PROGRAM => 'uim-xim',
-           XMODIFIERS => '@im=uim',
-          },
-   xcin => {
-            XIM => 'xcin',
-            XIM_PROGRAM => 'xcin',
-            XMODIFIERS => '@im=xcin-zh_TW',
-            GTK_IM_MODULE => 'xim',
-           },
-   'x-unikey' => {
-                  GTK_IM_MODULE => 'xim',
-                  XMODIFIERS => '@im=unikey'
-                 },
-);
-
-sub get_ims() { keys %IM_config }
-           
-
-
-#-------------------------------------------------------------
-#
-# Locale configuration regarding encoding/IM
-
-#- ENC is used by some versions or rxvt
-my %locale2encoding = (
-                       'ja_JP' => 'eucj',
-                       'ko_KR' => 'kr',
-                       'zh_CN' => 'gb',
-                       # zh_SG zh_HK were reported as missing by make check:
-                       'zh_HK' => 'big5',
-                       'zh_SG' => 'gb',
-                       'zh_TW' => 'big5',
-                      );
-
-my %IM_locale_specific_config = (
-           #-XFree86 has an internal XIM for Thai that enables syntax checking etc.
-           #-'Passthroug' is no check at all, 'BasicCheck' accepts bad sequences
-           #-and convert them to right ones, 'Strict' refuses bad sequences
-           'th_TH' => {
-                       XIM_PROGRAM => '/bin/true', #- it's an internal module
-                       XMODIFIERS => '"@im=BasicCheck"',
-                      },
-          );
-
-my %default_im;
-
-sub get_default_im {
-    my ($lang) = @_;
-    $default_im{$lang}{IM};
-}
-
-sub set_default_im {
-    my ($im, @langs) = @_;
-    foreach (@langs) {
-        $default_im{$_}{IM} = $im foreach $_, analyse_locale_name($_)->{main};
-    }
-}
-
-set_default_im('x-unikey',  qw(vi_VN vi_VN.TCVN vi_VN.UTF-8 vi_VN.VISCII));
-# CJK default input methods:
-set_default_im('scim',  qw(am ja_JP ja_JP.UTF-8 ko_KR ko_KR.UTF-8 zh_CN zh_CN.UTF-8 zh_HK zh_HK.UTF-8 zh_SG zh_SG.UTF-8 zh_TW zh_TW.UTF-8));
-
-# keep the following list in sync with share/rpmsrate:
-my %IM2packages = (
-                   'chinput' =>  { generic => [ 'miniChinput' ] },
-                   'iiimf' => {
-                              generic => [ qw(iiimf-engines-unit) ],
-                              am => [ qw(iiimf-engines-unit) ],
-                              ja => [ qw(iiimf-engines-canna) ],
-                              ko => [ qw(iiimf-engines-sun-korea) ],
-                              zh => [ qw(iiimf-engines-sun-chinese) ],
-                             },
-                   'scim' => {
-                              generic => [ qw(scim scim-m17n scim-tables) ],
-                              am => [ qw(scim scim-tables ) ],
-                              ja => [ qw(scim-anthy scim-input-pad) ],
-                              ko => [ qw(scim-hangul) ],
-                              zh => [ qw(scim-pinyin scim-tables scim-chewing) ],
-                             },
-                   'scim+uim' => { generic => [ qw(scim-uim) ] },
-                   'uim' => { generic => [ qw(uim-gtk uim-anthy) ] },
-                   'vi' =>  { generic => [ 'x-unikey' ] },
-                  );
-
-sub IM2packages {
-    my ($locale) = @_;
-    my $im = $locale->{IM};
-    return if $im eq "None";
-    my $lang = analyse_locale_name($locale->{lang})->{main};
-    my $packages = $IM2packages{$im}{$lang} || $IM2packages{$im}{generic};
-    return $packages ? @$packages : $im;
-}
-
-#- [0]: console font name
-#- [1]: sfm map for console font (if needed)
-#- [2]: acm file for console font (none if utf8)
-#- [3]: iocharset param for mount (utf8 if utf8)
-#- [4]: codepage parameter for mount (none if utf8)
-my %charsets = (
-#- chinese needs special console driver for text mode
-"Big5"        => [ undef,         undef,   undef,           "big5",       "950" ],
-"gb2312"      => [ undef,         undef,   undef,           "gb2312",     "936" ],
-"gbk"         => [ undef,         undef,   undef,           "gb2312",     "936" ],
-"C"           => [ "lat0-16",     undef,   "iso15",         "iso8859-1",  "850" ],
-"iso-8859-1"  => [ "lat1-16",     undef,   "iso01",         "iso8859-1",  "850" ],
-"iso-8859-2"  => [ "lat2-sun16",  undef,   "iso02",         "iso8859-2",  "852" ],
-"iso-8859-5"  => [ "UniCyr_8x16", undef,   "iso05",         "iso8859-5",  "866" ],
-"iso-8859-7"  => [ "iso07.f16",   undef,   "iso07",         "iso8859-7",  "869" ],
-"iso-8859-9"  => [ "lat5u-16",    undef,   "iso09",         "iso8859-9",  "857" ],
-"iso-8859-13" => [ "tlat7",       undef,   "iso13",         "iso8859-13", "775" ],
-"iso-8859-15" => [ "lat0-16",     undef,   "iso15",         "iso8859-15", "850" ],
-#- japanese needs special console driver for text mode [kon2]
-"jisx0208"    => [ undef,         undef,   "trivial.trans", "euc-jp",     "932" ],
-"koi8-r"      => [ "UniCyr_8x16", undef,   "koi8-r",        "koi8-r",     "866" ],
-"koi8-u"      => [ "UniCyr_8x16", undef,   "koi8-u",        "koi8-u",     "866" ],
-"cp1251"      => [ "UniCyr_8x16", undef,   "cp1251",        "cp1251",     "866" ],
-#- korean needs special console driver for text mode
-"ksc5601"     => [ undef,         undef,   undef,           "euc-kr",     "949" ],
-#- I have no console font for Thai...
-"tis620"      => [ undef,         undef,   "trivial.trans", "tis-620",    "874" ],
-# UTF-8 encodings here; they differ in the console font mainly.
-"utf_ar"      => [ "iso06.f16",      undef,   undef,      "utf8",    undef ],
-"utf_armn"    => [ "arm8",           undef,   undef,      "utf8",    undef ],
-"utf_az"      => [ "tiso09e",        undef,   undef,      "utf8",    undef ],
-"utf_beng"    => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_cyr1"    => [ "UniCyr_8x16",    undef,   undef,      "utf8",    undef ],
-"utf_cyr2"    => [ "koi8-k",         undef,   undef,      "utf8",    undef ],
-"utf_deva"    => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_ethi"    => [ "Agafari-16",     undef,   undef,      "utf8",    undef ],
-"utf_geor"    => [ "t_geors",        undef,   undef,      "utf8",    undef ],
-"utf_guru"    => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_he"      => [ "iso08.f16",      undef,   undef,      "utf8",    undef ],
-"utf_iu"      => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_khmr"    => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_knda"    => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_laoo"    => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_lat1"    => [ "lat0-16",        undef,   undef,      "utf8",    undef ],
-"utf_lat5"    => [ "lat5u-16",       undef,   undef,      "utf8",    undef ],
-"utf_lat8"    => [ "iso14.f16",      undef,   undef,      "utf8",    undef ],
-"utf_mlym"    => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_taml"    => [ "tamil",          undef,   undef,      "utf8",    undef ],
-# console font still to do
-"utf_tfng"    => [ undef,            undef,   undef,      "utf8",    undef ],
-"utf_vi"      => [ "tcvn8x16",       undef,   undef,      "utf8",    undef ],
-# default for utf-8 encodings
-"unicode"     => [ "LatArCyrHeb-16", undef,   undef,      "utf8",    undef ],
-);
-
-#- for special cases not handled magically
-my %charset2kde_charset = (
-    gb2312 => 'gb2312.1980-0',
-    gbk => 'gb2312.1980-0',
-    jisx0208 => 'jisx0208.1983-0',
-    ksc5601 => 'ksc5601.1987-0',
-    Big5 => 'big5-0',
-    cp1251 => 'microsoft-cp1251',
-    utf8 => 'iso10646-1',
-    tis620 => 'tis620-0',
-);
-
-my @during_install__lang_having_their_LC_CTYPE = qw(ja ko ta);
-
-
-#- -------------------
-
-sub l2console_font {
-    my ($locale, $during_install) = @_;
-    my $c = $charsets{l2charset($locale->{lang}) || return} or return;
-    my ($name, $sfm, $acm) = @$c;
-    undef $acm if $locale->{utf8} && !$during_install;
-    ($name, $sfm, $acm);
-}
-
-sub get_kde_lang {
-    my ($locale, $o_default) = @_;
-
-    #- get it using 
-    #- echo C $(rpm -qp --qf "%{name}\n" /RPMS/kde-i18n-*  | sed 's/kde-i18n-//')
-    my @valid_kde_langs = qw(C
-af ar az be bg bn br bs ca cs cy da de el en_GB eo es et eu fa fi fo fr ga gl he hi hr hsb hu id is it ja ko ku lo lt lv mi mk mn ms mt nb nds nl nn nso oc pl pt pt_BR ro ru se sk sl sr ss sv ta tg th tr uk uz ven vi wa wen xh zh_CN zh_TW zu);
-    my %valid_kde_langs; @valid_kde_langs{@valid_kde_langs} = ();
-
-    my $valid_lang = sub {
-	my ($lang) = @_;
-	#- fast & dirty solution to ensure bad entries do not happen
-        my %fixlangs = (en => 'C', en_US => 'C',
-                        'sr@Latn' => 'sr',
-                        st => 'nso', ve => 'ven',
-                        zh_CN => 'zh_CN', zh_SG => 'zh_CN', zh_TW => 'zh_TW', zh_HK => 'zh_TW');
-        exists $fixlangs{$lang} ? $fixlangs{$lang} :
-	  exists $valid_kde_langs{$lang} ? $lang :
-	  exists $valid_kde_langs{locale_to_main_locale($lang)} ? locale_to_main_locale($lang) : '';
-    };
-
-    my $r;
-    $r ||= $valid_lang->($locale->{lang});
-    $r ||= find { $valid_lang->($_) } split(':', getlocale_for_lang($locale->{lang}, $locale->{country}));
-    $r || $o_default || 'C';
-}
-
-sub charset2kde_charset {
-    my ($charset, $o_default) = @_;
-    my $iocharset = ($charsets{$charset} || [])->[3];
-
-    my @valid_kde_charsets = qw(big5-0 gb2312.1980-0 iso10646-1 iso8859-1 iso8859-4 iso8859-6 iso8859-8 iso8859-13 iso8859-14 iso8859-15 iso8859-2 iso8859-3 iso8859-5 iso8859-7 iso8859-9 koi8-r koi8-u ksc5601.1987-0 jisx0208.1983-0 microsoft-cp1251 tis620-0);
-    my %valid_kde_charsets; @valid_kde_charsets{@valid_kde_charsets} = ();
-
-    my $valid_charset = sub {
-	my ($charset) = @_;
-	#- fast & dirty solution to ensure bad entries do not happen
-	exists $valid_kde_charsets{$charset} && $charset;
-    };
-
-    my $r;
-    $r ||= $valid_charset->($charset2kde_charset{$charset});
-    $r ||= $valid_charset->($charset2kde_charset{$iocharset});
-    $r ||= $valid_charset->($iocharset);
-    $r || $o_default || 'iso10646-1';
-}
-
-#- font+size for different charsets; the field [0] is the default,
-#- others are overrridens for fixed(1), toolbar(2), menu(3) and taskbar(4)
-my %charset2kde_font = (
-  'C' => [ "Sans,10", "Monospace,10" ],
-  'iso-8859-1'  => [ "Sans,10", "Monospace,10" ],
-  'iso-8859-2'  => [ "Sans,10", "Monospace,10" ],
-  'iso-8859-7'  => [ "Helvetica,12", "courier,10", "Helvetica,11" ],
-  'iso-8859-9'  => [ "Sans,10", "Monospace,10" ],
-  'iso-8859-15' => [ "Sans,10", "Monospace,10" ],
-  'iso-8859-13' => [ "Sans,10", "Monospace,10" ],
-  'jisx0208' => [ "Sazanami Gothic,13" ],
-  'ksc5601' => [ "Baekmuk Gulim,16" ],
-  'gb2312' => [ "Nimbus Sans L,10", "Monospace,10" ],
-  'Big5' => [ "Nimbus Sans L,10", "Monospace,10" ],
-  'tis620' => [ "Norasi,16", "Norasi,15" ],
-  'koi8-u' => [ "Nimbus Sans L,10", "Monospace,10" ],
-  'utf_ar' => [ "Terafik,14", "Courier New,13", "Terafik,13" ], 
-  'utf_az' => [ "Nimbus Sans L,12", "Nimbus Mono L,10", "Nimbus Sans L,11" ],
-  'utf_he' => [ "Nachlieli CLM,13", "Miriam Mono CLM,10", "Nachlieli CLM,11" ],
-#-'utf_iu' => [ "????,14", ],
-  'utf_vi' => [ "Nimbus Sans L,12", "Nimbus Mono L,10", "Nimbus Sans L,11" ],
-  #- script based
-  'utf_armn' => [ "Artsounk,12", "Monospace,10", "Artsounk,11" ],
-  'utf_beng' => [ "Mukti Narrow,14", "Mitra Mono,12", "Mukti Narrow,14" ],
-  'utf_deva' => [ "Raghindi,14", ],
-  'utf_ethi' => [ "GF Zemen Unicode,15" ],
-  'utf_guru' => [ "Lohit Punjab,14", ],
-#-'utf_khmr' => [ "????,14", ],
-  'utf_knda' => [ "Sampige,14", ],
-  'utf_lat1' => [ "Sans,10", "Monospace,10" ],
-  'utf_lat5' => [ "Sans,10", "Monospace,10" ],
-  'utf_lat8' => [ "Sans,10", "Monospace,10" ],
-  'utf_mlym' => [ "malayalam,14", ],
-  'utf_taml' => [ "TSCu_Paranar,14", "Tsc_avarangalfxd,10", "TSCu_Paranar,12", ],
-  'utf_tfng' => [ "Hapax Berbère,14", ],
-  #- the following should be changed to better defaults when better fonts
-  #- get available
-  'utf_geor' => [ "ClearlyU,15" ],
-  'utf_laoo' => [ "ClearlyU,15" ],
-  'default'  => [ "Sans,12", "Monospace,10", "Sans,11" ],
-);
-
-sub charset2kde_font {
-    my ($charset, $type) = @_;
-
-    my $font = $charset2kde_font{$charset} || $charset2kde_font{default};
-    my $r = $font->[$type] || $font->[0];
-
-    #- the format is "font-name,size,-1,5,0,0,0,0,0,0" I have no idea of the
-    #- meaning of that "5"...
-    "$r,-1,5,0,0,0,0,0,0";
-}
-
-# this define pango name fonts (like "NimbusSans L") depending
-# on the "charset" defined by language array. This allows to selecting
-# an appropriate font for each language for the installer only.
-my %charset2pango_font = (
-  'tis620' =>      "Norasi 17",
-  'utf_ar' =>      "Roya 14",
-  'utf_armn' =>    "Artsounk 14",
-  'utf_cyr2' =>    "Nimbus Sans L 12",
-  'utf_geor' =>    "Sans 14",
-  'utf_he' =>      "Sans 12",
-  'utf_laoo' =>    "Sans 14",
-  'utf_taml' =>    "TSCu_Paranar 14",
-  'utf_vi' =>      "Sans 14",
-  'iso-8859-7' =>  "Kerkis 14",
-  'jisx0208' =>    "Sans 14",
-  #- Nimbus Sans L is missing some chars used by some cyrillic languages,
-  #- but tose have not yet DrakX translations; it also misses vietnamese
-  #- latin chars; all other latin and cyrillic are covered.
-  'default' =>     "Sans 12"
-);
-
-sub charset2pango_font {
-    my ($charset) = @_;
-    
-    $charset2pango_font{exists $charset2pango_font{$charset} ? $charset : 'default'};
-}
-
-sub l2pango_font {
-    my ($lang) = @_;
-
-    my $charset = l2charset($lang) or log::l("no charset found for lang $lang!"), return;
-    my $font = charset2pango_font($charset);
-    log::l("lang:$lang charset:$charset font:$font sfm:$charsets{$charset}[0]");
-    
-    return $font;
-}
-
-sub set {
-    my ($locale, $b_translate_for_console) = @_;
-    
-    if ($::move) {
-	move::handleI18NClp($locale->{lang});
-	put_in_hash(\%ENV, i18n_env($locale));
-	return;
-    }
-
-    my $lang = $locale->{lang};
-    exists $langs{$lang} or log::l("lang::set: trying to set to $lang but I do not know it!"), return;
-
-    #- set all LC_* variables to a unique locale ("C"), and only redefine
-    #- LC_COLLATE (for sorting) and LANGUAGE (for the po files)
-    $ENV{$_} = 'C' foreach qw(LC_NUMERIC LC_TIME LC_MONETARY LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT LC_IDENTIFICATION);
-    
-    $ENV{LC_CTYPE}    = $lang;
-    $ENV{LC_MESSAGES} = $lang;
-    $ENV{LC_COLLATE}  = $lang;
-    $ENV{LANG}        = $lang;
-    
-    if ($b_translate_for_console && $lang =~ /^(ko|ja|zh|th)/) {
-	log::l("not translating in console");
-	$ENV{LANGUAGE}  = 'C';
-    } else {
-	$ENV{LANGUAGE}  = getLANGUAGE($lang);
-    }
-    load_mo();
-    $lang;
-}
-
-sub langs {
-    my ($l) = @_;
-    $l->{all} ? list_langs() : grep { $l->{$_} } keys %$l;
-}
-
-sub langsLANGUAGE {
-    my ($l, $o_c) = @_;
-    uniq(map { split ':', getLANGUAGE($_, $o_c) } langs($l));
-}
-
-sub utf8_should_be_needed {
-    my ($locale) = @_; 
-    my @l = uniq(grep { $_ ne 'C' } map { l2charset($_) } langs($locale->{langs}));
-    @l > 1 || any { /utf|unicode/ } @l;
-}
-
-sub pack_langs { 
-    my ($l) = @_; 
-    my $s = $l->{all} ? 'all' : join ':', uniq(map { getLANGUAGE($_) } langs($l));
-    $s;
-}
-
-sub system_locales_to_ourlocale {
-    my ($locale_lang, $locale_country) = @_;
-    my $locale = {};
-    my $h = analyse_locale_name($locale_lang);
-    my $locale_lang_no_encoding = join('_', $h->{main}, if_($h->{country}, $h->{country}));
-    $locale->{lang} = member($locale_lang_no_encoding, list_langs()) ?
-	$locale_lang_no_encoding : #- special lang's such as en_US pt_BR
-	$h->{main};
-    $locale->{lang} .= '@' . $h->{variant} if $h->{variant};
-    $locale->{country} = analyse_locale_name($locale_country)->{country};
-    $locale->{utf8} = $h->{charset} && $h->{charset} eq 'UTF-8';
-    #- safe fallbacks
-    $locale->{lang} ||= 'en_US';
-    $locale->{country} ||= 'US';
-    $locale;
-}
-
-sub read {
-    my ($b_user_only) = @_;
-    my ($f1, $f2) = ("$::prefix$ENV{HOME}/.i18n", "$::prefix/etc/sysconfig/i18n");
-    my %h = getVarsFromSh($b_user_only && -e $f1 ? $f1 : $f2);
-    my $locale = system_locales_to_ourlocale($h{LC_MESSAGES} || 'en_US', $h{LC_MONETARY} || 'en_US');
-    
-    if ($h{XIM_PROGRAM}) {
-	$locale->{IM} = find { $IM_config{$_}{XIM_PROGRAM} eq $h{XIM_PROGRAM} } keys %IM_config;
-	$locale->{IM} ||= find { member($h{XIM_PROGRAM}, values %{$IM_XIM_program{$_}}) } keys %IM_XIM_program;
-    }
-    $locale;
-}
-
-sub write_langs {
-    my ($langs) = @_;
-    my $s = pack_langs($langs);
-    symlink "$::prefix/etc/rpm", "/etc/rpm" if $::prefix;
-    require URPM;
-    URPM::add_macro("_install_langs $s");
-    substInFile { s/%_install_langs.*//; $_ .= "%_install_langs $s\n" if eof && $s } "$::prefix/etc/rpm/macros";
-}
-
-sub i18n_env {
-    my ($locale) = @_;
-
-    my $locale_lang = getlocale_for_lang($locale->{lang}, $locale->{country}, $locale->{utf8});
-    my $locale_country = getlocale_for_country($locale->{lang}, $locale->{country}, $locale->{utf8});
-
-    my $h = {
-	XKB_IN_USE => '',
-	(map { $_ => $locale_lang } qw(LANG LC_COLLATE LC_CTYPE LC_MESSAGES LC_TIME)),
-	LANGUAGE => getLANGUAGE($locale->{lang}, $locale->{country}, $locale->{utf8}),
-	(map { $_ => $locale_country } qw(LC_NUMERIC LC_MONETARY LC_ADDRESS LC_MEASUREMENT LC_NAME LC_PAPER LC_IDENTIFICATION LC_TELEPHONE))
-    };
-
-    log::l("lang::write: lang:$locale->{lang} country:$locale->{country} locale|lang:$locale_lang locale|country:$locale_country language:$h->{LANGUAGE}");
-
-    $h;
-}
-
-sub write { 
-    my ($locale, $b_user_only, $b_dont_touch_kde_files) = @_;
-
-    $locale && $locale->{lang} or return;
-
-    my $h = i18n_env($locale);
-
-    my ($name, $sfm, $acm) = l2console_font($locale, 0);
-    if ($name && !$b_user_only) {
-	my $p = "$::prefix/usr/lib/kbd";
-	if ($name) {
-	    eval {
-		log::explanations(qq(Set system font to "$name"));
-		my $font = "$p/consolefonts/$name.psf";
-		$font .= ".gz" if ! -e $font;
-		cp_af($font, "$::prefix/etc/sysconfig/console/consolefonts");
-		add2hash $h, { SYSFONT => $name };
-	    };
-	    $@ and log::explanations("missing console font $name");
-	}
-	if ($sfm) {
-	    eval {
-		log::explanations(qq(Set screen font map (Unicode mapping table) to "$name"));
-		cp_af(glob_("$p/consoletrans/$sfm*"), "$::prefix/etc/sysconfig/console/consoletrans");
-		add2hash $h, { UNIMAP => $sfm };
-	    };
-	    $@ and log::explanations("missing console unimap file $sfm");
-	}
-	if ($acm) {
-	    eval {
-		log::explanations(qq(Set application-charset map (Unicode mapping table) to "$name"));
-		cp_af(glob_("$p/consoletrans/$acm*"), "$::prefix/etc/sysconfig/console/consoletrans");
-		add2hash $h, { SYSFONTACM => $acm };
-	    };
-	    $@ and log::explanations("missing console acm file $acm");
-	}
-	
-    }
-
-    add2hash($h, $IM_locale_specific_config{$h->{LANG}});
-    $h->{ENC} = $locale2encoding{$h->{LANG}};
-    $h->{ENC} = 'utf8' if member($h->{LANG}, qw(ja_JP.UTF-8 ko_KR.UTF-8 zh_CN.UTF-8 zh_HK.UTF-8 zh_SG.UTF-8 zh_TW.UTF-8));
-
-    my $im = $locale->{IM};
-    if ($im && $im ne 'None') {
-        log::explanations(qq(Configuring "$im" IM));
-        delete @$h{qw(GTK_IM_MODULE QT_IM_MODULE XIM XIM_PROGRAM XMODIFIERS)};
-        add2hash($h, { XIM_PROGRAM => $IM_XIM_program{$im}{$h->{LC_NAME}} });
-
-        add2hash($h, $IM_config{$locale->{IM}});
-        $h->{QT_IM_MODULE} = $h->{GTK_IM_MODULE} if $h->{GTK_IM_MODULE};
-        my @packages = IM2packages($locale);
-        if (@packages && $b_user_only) {
-            require interactive;
-            interactive->vnew->ask_warn(N("Warning"),
-                                       N("You should install the following packages: %s", 
-                                         join(
-                                              #-PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-                                              N(", "),
-                                              @packages,
-                                             ),
-                                        )
-                                      );
-        } elsif (@packages) {
-            log::explanations("Installing IM packages: ", join(', ', @packages));
-            do_pkgs_standalone->new->install(@packages);
-        }
-    }
-
-    #- deactivate translations on console for most CJK, RTL and complex languages
-    if (member($locale->{lang}, qw(ar bn fa he hi ja kn ko pa_IN ug ur yi zh_TW zh_CN))) {
-        #- CONSOLE_NOT_LOCALIZED if defined to yes, disables translations on console
-        #-	it is needed for languages not supported by the linux console
-        log::explanations(qq(Disabling tranlsation on console since "$locale->{lang}" is not supported by the console));
-        add2hash($h, { CONSOLE_NOT_LOCALIZED => 'yes' });
-    }
-
-    my $file = $b_user_only ? "$ENV{HOME}/.i18n" : '/etc/sysconfig/i18n';
-    log::explanations(qq(Setting l10n configuration in "$file"));
-    setVarsInSh($::prefix . $file, $h);
-
-    if (!$b_user_only) {
-        log::explanations("Set default menu language");
-        substInFile {
-            s!^function lang\b.*!function lang()="$h->{LANG}"!g;
-        } "$::prefix/etc/menu-methods/lang.h" if !$b_user_only;
-    }
-
-    configure_hal($locale) if !$b_user_only;
-    
-    my $charset = l2charset($locale->{lang});
-    my $qtglobals = $b_user_only ? "$ENV{HOME}/.qt/qtrc" : "$::prefix/etc/qtrc";
-    update_gnomekderc($qtglobals, General => (
-       		      font => charset2kde_font($charset, 0),
-       	          ));
-
-    eval {
-	my $confdir = $::prefix . ($b_user_only ? "$ENV{HOME}/.kde" : '/usr') . '/share/config';
-
-	-d $confdir or die 'not configuring kde config files since it is not installed/used';
-
-	configure_kdeglobals($locale, $confdir);
-
-	my %qt_xim = (zh => 'Over The Spot', ko => 'On The Spot', ja => 'On The Spot');
-	if ($b_user_only && (my $qt_xim = $qt_xim{locale_to_main_locale($locale->{lang})})) {
-         log::explanations(qq(Setting XIM input style to "$qt_xim"));
-	    update_gnomekderc("$ENV{HOME}/.qt/qtrc", General => (XIMInputStyle => $qt_xim));
-	}
-
-	if (!$b_user_only) {
-	    my $kde_charset = charset2kde_charset(l2charset($locale->{lang}));
-	    my $welcome = c::to_utf8(N("Welcome to %s", '%n'));
-         log::explanations(qq(Configuring KDM/MdkKDM));
-	    substInFile { 
-		s/^(GreetString)=.*/$1=$welcome/;
-		s/^(Language)=.*/$1=$locale->{lang}/;
-		if (!member($kde_charset, 'iso8859-1', 'iso8859-15')) { 
-		    #- do not keep the default for those
-    		    my $font_list = $charset2kde_font{l2charset($locale->{lang})} || $charset2kde_font{default};
-		    my $font_small = $font_list->[0];
-		    my $font_huge = $font_small;
-		    $font_huge =~ s/(.*?),\d+/$1,24/;
-		    s/^(StdFont)=.*/$1=$font_small,5,$kde_charset,50,0/;
-		    s/^(FailFont)=.*/$1=$font_small,5,$kde_charset,75,0/;
-		    s/^(GreetFont)=.*/$1=$font_huge,5,$kde_charset,50,0/;
-		}
-	    } "$::prefix/usr/share/config/kdm/kdmrc";
-	}
-
-    } if !$b_dont_touch_kde_files;
-}
-
-sub configure_hal {
-    my ($locale) = @_;
-    my $option = sub {
-	my ($cat, $val) = @_;
-	qq(\t\t<merge key="$cat.policy.mount_option.$val" type="bool">true</merge>);
-    };
-    my %options = (fs_options($locale), utf8 => 1);
-    my %known_options = (
-	auto  => [ 'iocharset', 'codepage' ],
-	vfat  => [ 'iocharset', 'codepage' ],
-	msdos => [ 'iocharset', 'codepage' ],
-	ntfs  => [ 'iocharset', 'utf8' ],
-	cdrom => [ 'iocharset', 'codepage', 'utf8' ],
-    );
-    my $options = sub {
-	my ($cat, $name) = @_;
-	join("\n", map { 
-	    $option->($cat, $_ eq 'utf8' ? $_ : "$_=$options{$_}");
-	} grep { $options{$_} } @{$known_options{$name}});
-    };
-    my $options_per_fs = join('', map {
-	my $s = $options->('volume', $_);
-	$s && sprintf(<<'EOF', $_, $s);
-	<match key="volume.fstype" string="%s">
-%s
-	</match>
-EOF
-    } 'auto', 'vfat', 'msdos', 'ntfs');
-    
-    output_p("$::prefix/usr/share/hal/fdi/30osvendor/locale-policy.fdi", 
-	     sprintf(<<'EOF', $options_per_fs, $options->('storage', 'cdrom')));
-<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- --> 
-
-<deviceinfo version="0.2">
-
-  <device>
-    <match key="block.is_volume" bool="true">
-      <match key="volume.fsusage" string="filesystem">
-
-%s 
-      </match>
-    </match>
-
-    <match key="storage.drive_type" string="cdrom">
-%s
-    </match>    
-  </device>
-
-</deviceinfo>
-EOF
-}
-
-sub configure_kdeglobals {
-    my ($locale, $confdir) = @_;
-    my $kdeglobals = "$confdir/kdeglobals";
-
-    my $charset = l2charset($locale->{lang});
-    my $kde_charset = charset2kde_charset($charset);
-    my ($prev_kde_charset) = cat_($kdeglobals) =~ /^Charset=(.*)/mi;
-
-    mkdir_p($confdir);
-
-    my $lang = get_kde_lang($locale);
-    log::explanations("Configuring KDE regarding charset ($kde_charset), language ($lang) and country ($locale->{country})");
-    update_gnomekderc($kdeglobals, Locale => (
-    	      Charset => $kde_charset,
-    	      Country => lc($locale->{country}),
-    	      Language => getLANGUAGE($locale->{lang}, $locale->{country}, $locale->{utf8}),
-    	  ));
-
-    if ($prev_kde_charset ne $kde_charset) {
-    log::explanations("Configuring KDE regarding fonts");
-        update_gnomekderc($kdeglobals, WM => (
-       		      activeFont => charset2kde_font($charset,0),
-       		  ));
-        update_gnomekderc($kdeglobals, General => (
-       		      fixed => charset2kde_font($charset, 1),
-       		      font => charset2kde_font($charset, 0),
-       		      menuFont => charset2kde_font($charset, 3),
-       		      taskbarFont => charset2kde_font($charset, 4),
-       		      toolBarFont => charset2kde_font($charset, 2),
-       	          ));
-        update_gnomekderc("$confdir/konquerorrc", FMSettings => (
-       		      StandardFont => charset2kde_font($charset, 0),
-       		  ));
-        update_gnomekderc("$confdir/kdesktoprc", FMSettings => (
-       		      StandardFont => charset2kde_font($charset, 0),
-       		  ));
-    }
-}
-
-sub bindtextdomain() {
-    #- if $::prefix is set, search for libDrakX.mo in locale_special
-    #- NB: not using $::isInstall to make it work more easily at install and standalone
-    my $localedir = "$ENV{SHARE_PATH}/locale" . ($::prefix ? "_special" : '');
-
-    c::setlocale();
-    c::bind_textdomain_codeset('libDrakX', 'UTF-8');
-    $::need_utf8_i18n = 1;
-    c::bindtextdomain('libDrakX', $localedir);
-
-    $localedir;
-}
-
-sub load_mo {
-    my ($o_lang) = @_;
-
-    my $localedir = bindtextdomain();
-    my $suffix = 'LC_MESSAGES/libDrakX.mo';
-
-    $o_lang ||= $ENV{LANGUAGE} || $ENV{LC_ALL} || $ENV{LC_MESSAGES} || $ENV{LANG};
-
-    my @possible_langs = map { { name => $_, mofile => "$localedir/$_/$suffix" } } split ':', $o_lang;
-
-    -s $_->{mofile} and return $_->{name} foreach @possible_langs;
-
-    '';
-}
-
-
-#- used in Makefile during "make get_needed_files"
-sub console_font_files() {
-    map { -e $_ ? $_ : "$_.gz" }
-      (map { "/usr/lib/kbd/consolefonts/$_.psf" } uniq grep { $_ } map { $_->[0] } values %charsets),
-      (map { -e $_ ? $_ : "$_.sfm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep { $_ } map { $_->[1] } values %charsets),
-      (map { -e $_ ? $_ : "$_.acm" } map { "/usr/lib/kbd/consoletrans/$_" } uniq grep { $_ } map { $_->[2] } values %charsets);
-}
-
-sub load_console_font {
-    my ($locale) = @_;
-    my ($name, $sfm, $acm) = l2console_font($locale, 1);
-
-    require run_program;
-    run_program::run(if_($ENV{LD_LOADER}, $ENV{LD_LOADER}), 
-		     'consolechars', '-v', '-f', $name || 'lat0-16',
-		     if_($sfm, '-u', $sfm), if_($acm, '-m', $acm));
-}
-
-sub fs_options {
-    my ($locale) = @_;
-    if ($locale->{utf8}) {
-	(iocharset => 'utf8', codepage => undef);
-    } else {
-	my $c = $charsets{l2charset($locale->{lang}) || return} or return;
-	my ($iocharset, $codepage) = @$c[3..4];
-	(iocharset => $iocharset, codepage => $codepage);
-    }
-}
-
-sub during_install__l2charset {
-    my ($lang) = @_;
-    return if member($lang, @during_install__lang_having_their_LC_CTYPE);
-
-    my ($c) = l2charset($lang) or die "bad lang $lang\n";
-    $c = 'UTF-8' if member($c, 'tis620', 'C', 'unicode');
-    $c = 'UTF-8' if $c =~ /koi8-/;
-    $c = 'UTF-8' if $c =~ /iso-8859/;
-    $c = 'UTF-8' if $c =~ /cp125/;
-    $c = 'UTF-8' if $c =~ /utf_/;
-    uc($c);
-}
-
-sub check() {
-    $^W = 0;
-    my ($warnings, $errors) = (0, 0);
-    my $warn = sub {
-	my ($msg, $b_is_error) = @_;
-	if ($b_is_error) {
-	    print STDERR "\tErrors:\n" if !$errors++;
-	} else {
-	    print STDERR "\tWarnings:\n" if !$warnings++;
-	}
-	print STDERR "$msg\n";
-    };
-    my $err = sub { $warn->($_[0], 'error') };
-    
-    my @wanted_charsets = uniq map { l2charset($_) } list_langs();
-    $warn->("unused charset $_ (given in \%charsets, but not used in \%langs)") foreach difference2([ keys %charsets ], \@wanted_charsets);
-
-    $warn->("unused entry $_ in \%xim") foreach grep { !/UTF-8/ } difference2([ keys %IM_locale_specific_config ], [ map { l2locale($_) } list_langs() ]);
-
-    #- consolefonts are checked during build via console_font_files()
-
-    if (my @l = difference2([ 'default', keys %charsets ], [ keys %charset2kde_font ])) {
-	$warn->("no kde font for charset " . join(" ", @l));
-    }
-
-    if (my @l = grep { get_kde_lang({ lang => $_, country => 'US' }, 'err') eq 'err' } list_langs()) {
-	$warn->("no KDE lang for langs " . join(" ", @l));
-    }
-    if (my @l = grep { charset2kde_charset($_, 'err') eq 'err' } keys %charsets) {
-	$warn->("no KDE charset for charsets " . join(" ", @l));
-    }
-
-    $warn->("no country corresponding to default locale $_->[1] of lang $_->[0]")
-      foreach grep { $_->[1] =~ /.._(..)/ && !exists $countries{$1} } map { [ $_, l2locale($_) ] } list_langs();
-
-    $err->("invalid charset $_ ($_ does not exist in \%charsets)") foreach difference2(\@wanted_charsets, [ keys %charsets ]);
-    $err->("invalid charset $_ in \%charset2kde_font ($_ does not exist in \%charsets)") foreach difference2([ keys %charset2kde_font ], [ 'default', keys %charsets ]);
-
-    $err->("default locale $_->[1] of lang $_->[0] is not listed in \@locales")
-      foreach grep { !member($_->[1], @locales) } map { [ $_, l2locale($_) ] } list_langs();
-
-    $err->("lang image for lang $_->[0] is missing (file $_->[1])")
-      foreach grep { !(-e $_->[1]) } map { [ $_, "pixmaps/langs/lang-$_.png" ] } list_langs();
-
-    $err->("default locale $_->[1] of country $_->[0] is not listed in \@locales")
-      foreach grep { !member($_->[1], @locales) } map { [ $_, c2locale($_) ] } list_countries();
-
-
-    exit($errors ? 1 : 0);
-}
-
-1;
diff --git a/perl-install/log.pm b/perl-install/log.pm
deleted file mode 100644
index da3c56037..000000000
--- a/perl-install/log.pm
+++ /dev/null
@@ -1,63 +0,0 @@
-package log; # $Id$
-
-use diagnostics;
-use strict;
-
-use c;
-
-my ($LOG, $LOG2);
-
-#-#####################################################################################
-#- Globals
-#-#####################################################################################
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub F() { $LOG }
-
-sub l {
-    $LOG or openLog();
-    if ($::testing) {
-	print STDERR @_, "\n";
-    } elsif ($LOG) {
-	print $LOG "* ", @_, "\n";
-	print $LOG2 "* ", @_, "\n" if $LOG2;
-    } elsif ($::isStandalone) {
-	c::syslog(c::LOG_WARNING(), join("", @_));
-    } else {
-	print STDERR @_, "\n";
-    }
-}
-
-sub openLog {
-    my ($o_file) = @_;
-
-    if ($o_file) { #- useLocal
-	open $LOG, "> $o_file";
-    } elsif ($::isInstall) {
-	open $LOG, "> /dev/tty3";
-	open $LOG2, ">> /tmp/ddebug.log";
-    }
-    select((select($LOG),  $| = 1)[0]) if $LOG;
-    select((select($LOG2), $| = 1)[0]) if $LOG2;
-}
-
-sub closeLog() { 
-    if ($LOG) { 
-	close $LOG; 
-	close $LOG2;
-    } elsif ($::isStandalone) {
-	c::closelog();
-    }
-}
-
-sub explanations {
-    if ($::isStandalone) {
-        c::syslog(c::LOG_INFO()|c::LOG_LOCAL1(), "@_");
-    } else {
-        l(@_);
-    }
-}
-
-1;
diff --git a/perl-install/loopback.pm b/perl-install/loopback.pm
deleted file mode 100644
index 96e542ab8..000000000
--- a/perl-install/loopback.pm
+++ /dev/null
@@ -1,126 +0,0 @@
-package loopback; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use MDK::Common::System;
-use common;
-use fs::type;
-use fs;
-use log;
-
-
-sub carryRootLoopback {
-    my ($part) = @_;
-    $_->{mntpoint} eq '/' and return 1 foreach @{$part->{loopback} || []};
-    0;
-}
-
-sub check_circular_mounts {
-    my ($part, $all_hds) = @_;
-
-    my $fstab = [ fs::get::fstab($all_hds), $part ]; # no pb if $part is already in $all_hds
-
-    my $base_mntpoint = $part->{mntpoint};
-    my $check; $check = sub {
-	my ($part, @seen) = @_;
-	push @seen, $part->{mntpoint} || return;
-	@seen > 1 && $part->{mntpoint} eq $base_mntpoint and die N("Circular mounts %s\n", join(", ", @seen));
-	if (my $part = fs::get::up_mount_point($part->{mntpoint}, $fstab)) {
-	    #- '/' carrier is a special case, it will be mounted first
-	    $check->($part, @seen) if !carryRootLoopback($part);
-	}
-	if (isLoopback($part)) {
-	    $check->($part->{loopback_device}, @seen);
-	}
-    };
-    $check->($part) if !($base_mntpoint eq '/' && isLoopback($part)); #- '/' is a special case, no loop check
-}
-
-sub carryRootCreateSymlink {
-    my ($part, $prefix) = @_;
-
-    carryRootLoopback($part) or return;
-
-    my $mntpoint = "$prefix$part->{mntpoint}";
-    unless (-e $mntpoint) {
-	eval { mkdir_p(dirname($mntpoint)) };
-	#- do non-relative link for install, should be changed to relative link before rebooting
-	symlink "/initrd/loopfs", $mntpoint;
-
-	mkdir_p("/initrd/loopfs/lnx4win/boot");
-	symlink "/initrd/loopfs/lnx4win/boot", "$prefix/boot";
-    }
-    #- indicate kernel to keep initrd
-    mkdir_p("$prefix/initrd");
-}
-
-
-sub format_part {
-    my ($part, $prefix) = @_;
-    fs::mount_part($part->{loopback_device}, $prefix);
-    create($part, $prefix);
-    fs::format::part_raw($part, undef);
-}
-
-sub create {
-    my ($part, $prefix) = @_;
-    my $f = $part->{device} = "$prefix$part->{loopback_device}{mntpoint}$part->{loopback_file}";
-    return if -e $f;
-
-    eval { mkdir_p(dirname($f)) };
-
-    log::l("creating loopback file $f ($part->{size} sectors)");
-
-    my $block_size = 128;
-    my $s = "\0" x (512 * $block_size);
-    sysopen(my $F, $f, 2 | c::O_CREAT()) or die "failed to create loopback file";
-    for (my $i = 0; $i < $part->{size}; $i += $block_size) {
-	syswrite $F, $s or die "failed to create loopback file";
-    }
-}
-
-sub getFree {
-    my ($dir, $part) = @_;
-    my $freespace = $dir ? 
-      2 * (MDK::Common::System::df($dir))[1] : #- df in KiB
-      $part->{size};
-
-    $freespace - sum map { $_->{size} } @{$part->{loopback} || []};
-}
-
-#- returns the size of the loopback file if it already exists
-#- returns -1 is the loopback file can not be used
-sub verifFile {
-    my ($dir, $file, $part) = @_;
-    -e "$dir$file" and return -s "$dir$file";
-
-    $_->{loopback_file} eq $file and return -1 foreach @{$part->{loopback} || []};
-
-    undef;
-}
-
-sub prepare_boot() {
-    my $r = readlink "$::prefix/boot"; 
-    unlink "$::prefix/boot"; 
-    mkdir_p("$::prefix/boot");
-    [$r, $::prefix];
-}
-
-sub save_boot {
-    my ($loop_boot, $prefix) = @{$_[0]};
-    
-    $loop_boot or return;
-
-    my @files = glob_("$prefix/boot/*");
-    cp_af(@files, $loop_boot) if @files;
-    rm_rf("$prefix/boot");
-    symlink $loop_boot, "$prefix/boot";
-}
-
-
-1;
-
diff --git a/perl-install/lvm.pm b/perl-install/lvm.pm
deleted file mode 100644
index 6f9ac2a20..000000000
--- a/perl-install/lvm.pm
+++ /dev/null
@@ -1,155 +0,0 @@
-package lvm; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use devices;
-use fs::type;
-use run_program;
-
-#- for partition_table_xxx emulation
-sub new {
-    my ($class, $name) = @_;
-    $name =~ s/\W/_/g;
-    $name = substr($name, 0, 63); # max length must be < NAME_LEN / 2  where NAME_LEN is 128
-    bless { disks => [], VG_name => $name }, $class;
-}
-sub hasExtended { 0 }
-sub adjustStart {}
-sub adjustEnd {}
-sub write {}
-sub cylinder_size { 
-    my ($hd) = @_;
-    $hd->{extent_size};
-}
-
-init() or log::l("lvm::init failed");
-
-sub init() {
-    devices::init_device_mapper();
-    if ($::isInstall) {
-	run_program::run('lvm2', 'vgscan');
-	run_program::run('lvm2', 'vgchange', '-a', 'y');
-    }
-    1;
-}
-
-sub lvm_cmd {
-    if (my $r = run_program::run('lvm2', @_)) {
-	$r;
-    } else {
-	$? >> 8 == 98 or return;
-
-	#- sometimes, it needs running vgscan again, doing so:
-	run_program::run('lvm2', 'vgscan');
-	run_program::run('lvm2', @_);
-    }
-}
-sub lvm_cmd_or_die {
-    my ($prog, @para) = @_;
-    lvm_cmd($prog, @para) or die "$prog failed\n";
-}
-
-sub check {
-    my ($in) = @_;
-
-    $in->do_pkgs->ensure_binary_is_installed('lvm2', 'lvm2') or return;
-    init();
-    1;
-}
-
-sub get_vg {
-    my ($part) = @_;
-    my $dev = expand_symlinks(devices::make($part->{device}));
-    run_program::get_stdout('lvm2', 'pvs', '--noheadings', '-o', 'vg_name', $dev) =~ /(\S+)/ && $1;
-}
-
-sub update_size {
-    my ($lvm) = @_;
-    $lvm->{extent_size} = to_int(run_program::get_stdout('lvm2', 'vgs', '--noheadings', '--nosuffix', '--units', 's', '-o', 'vg_extent_size', $lvm->{VG_name}));
-    $lvm->{totalsectors} = to_int(run_program::get_stdout('lvm2', 'vgs', '--noheadings', '--nosuffix', '--units', 's', '-o', 'vg_size', $lvm->{VG_name}));
-}
-
-sub get_lv_size {
-    my ($lvm_device) = @_;
-    to_int(run_program::get_stdout('lvm2', 'lvs', '--noheadings', '--nosuffix', '--units', 's', '-o', 'lv_size', "/dev/$lvm_device"));
-}
-
-sub get_lvs {
-    my ($lvm) = @_;
-    my @l = run_program::get_stdout('lvm2', 'lvs', '--noheadings', '--nosuffix', '--units', 's', '-o', 'lv_name', $lvm->{VG_name}) =~ /(\S+)/g;
-    $lvm->{primary}{normal} = 
-      [
-       map {
-	   my $device = "$lvm->{VG_name}/$_";
-	   my $fs_type = -e "/dev/$device" && fs::type::fs_type_from_magic({ device => $device });
-
-	   { device => $device, 
-	     lv_name => $_,
-	     rootDevice => $lvm->{VG_name},
-	     fs_type => $fs_type || 'ext2',
-	     size => get_lv_size($device) };
-       } @l
-      ];
-}
-
-sub vg_add {
-    my ($part) = @_;
-    my $dev = expand_symlinks(devices::make($part->{device}));
-    lvm_cmd_or_die('pvcreate', '-y', '-ff', $dev);
-    my $prog = lvm_cmd('vgs', $part->{lvm}) ? 'vgextend' : 'vgcreate';
-    lvm_cmd_or_die($prog, $part->{lvm}, $dev);
-}
-
-sub vg_destroy {
-    my ($lvm) = @_;
-
-    is_empty_array_ref($lvm->{primary}{normal}) or die N("Remove the logical volumes first\n");
-    lvm_cmd('vgchange', '-a', 'n', $lvm->{VG_name});
-    lvm_cmd_or_die('vgremove', $lvm->{VG_name});
-    foreach (@{$lvm->{disks}}) {
-	lvm_cmd_or_die('pvremove', devices::make($_->{device}));
-	delete $_->{lvm};
-	set_isFormatted($_, 0);
-    }
-}
-
-sub lv_delete {
-    my ($lvm, $lv) = @_;
-
-    lvm_cmd_or_die('lvremove', '-f', "/dev/$lv->{device}");
-
-    my $list = $lvm->{primary}{normal};
-    @$list = grep { $_ != $lv } @$list;
-}
-
-sub suggest_lv_name {
-    my ($lvm, $lv) = @_;
-    my $list = $lvm->{primary}{normal} ||= [];
-    $lv->{lv_name} ||= 1 + max(map { if_($_->{device} =~ /(\d+)$/, $1) } @$list);
-}
-
-sub lv_create {
-    my ($lvm, $lv) = @_;
-    suggest_lv_name($lvm, $lv);
-    $lv->{device} = "$lvm->{VG_name}/$lv->{lv_name}";
-    lvm_cmd_or_die('lvcreate', '--size', int($lv->{size} / 2) . 'k', '-n', $lv->{lv_name}, $lvm->{VG_name});
-    $lv->{size} = get_lv_size($lv->{device}); #- the created size is smaller than asked size
-    set_isFormatted($lv, 0);
-    my $list = $lvm->{primary}{normal} ||= [];
-    push @$list, $lv;
-}
-
-sub lv_resize {
-    my ($lv, $oldsize) = @_;
-    lvm_cmd_or_die($oldsize > $lv->{size} ? ('lvreduce', '-f') : 'lvextend', 
-		   '--size', int($lv->{size} / 2) . 'k', "/dev/$lv->{device}");
-    $lv->{size} = get_lv_size($lv->{device}); #- the resized partition may not be the exact asked size
-}
-
-1;
diff --git a/perl-install/modules.pm b/perl-install/modules.pm
deleted file mode 100644
index 8f50b78e1..000000000
--- a/perl-install/modules.pm
+++ /dev/null
@@ -1,329 +0,0 @@
-package modules; # $Id$
-
-use strict;
-
-use common;
-use detect_devices;
-use run_program;
-use log;
-use list_modules;
-use modules::any_conf;
-
-sub modules_descriptions() {
-    my $f = '/lib/modules/' . c::kernel_version() . '/modules.description';
-    -e $f or $f = '/lib/modules.description';
-    map { /(\S+)\s+(.*)/ } cat_($f);
-}
-
-sub module2description { +{ modules_descriptions() }->{$_[0]} }
-
-sub category2modules_and_description {
-    my ($categories) = @_;
-    my %modules_descriptions = modules_descriptions();
-    map { $_ => $modules_descriptions{$_} } category2modules($categories);
-}
-
-my %mappings_24_26 = (
-    "usb-ohci" => "ohci-hcd",
-    "usb-uhci" => "uhci-hcd",
-    "uhci" => "uhci-hcd",
-    "printer" => "usblp",
-    "bcm4400" => "b44",
-    "3c559" => "3c359",
-    "3c90x" => "3c59x",
-    "dc395x_trm" => "dc395x",
-);
-my %mappings_26_24 = reverse %mappings_24_26;
-$mappings_26_24{'uhci-hcd'} = 'usb-uhci';
-
-sub mapping_24_26 {
-    my ($modname) = @_;
-    $mappings_24_26{$modname} || $modname;
-}
-sub mapping_26_24 {
-    my ($modname) = @_;
-    $mappings_26_24{$modname} || $modname;
-}
-
-sub cond_mapping_24_26 {
-    my ($modname) = @_;
-    c::kernel_version() =~ /^\Q2.6/ && $mappings_24_26{$modname} || $modname;
-}
-
-#-###############################################################################
-#- module loading
-#-###############################################################################
-# handles dependencies
-sub load_raw {
-    my ($l, $h_options) = @_;
-    if ($::testing) {
-	log::l("i would load module $_ ($h_options->{$_})") foreach @$l;
-    } elsif ($::isInstall && !$::move) {
-	load_raw_install($l, $h_options);
-    } else {
-	run_program::run('/sbin/modprobe', $_, split(' ', $h_options->{$_})) 
-	  or !run_program::run('/sbin/modprobe', '-n', $_) #- ignore missing modules
-	  or die "insmod'ing module $_ failed" foreach @$l;
-    }
-    sleep 2 if any { /^(usb-storage|mousedev|printer)$/ } @$l;
-}
-sub load_with_options {
-    my ($l, $h_options) = @_;
-
-    my @l = map {
-	dependencies_closure(cond_mapping_24_26($_));
-    } @$l;
-
-    @l = remove_loaded_modules(@l) or return;
-
-    load_raw(\@l, $h_options);
-}
-sub load {
-    my (@l) = @_;
-    load_with_options(\@l, {});
-}
-
-# eg: load_and_configure($modules_conf, 'vfat', 'reiserfs', [ ne2k => 'io=0xXXX', 'dma=5' ])
-sub load_and_configure {
-    my ($conf, $module, $o_options) = @_;
-
-    my $category = module2category($module) || '';
-    my $network_devices = $category =~ m!network/(main|gigabit|usb|wireless)! && [ detect_devices::getNet() ];
-
-    my @l = remove_loaded_modules(dependencies_closure(cond_mapping_24_26($module)));
-    load_raw(\@l, { $module => $o_options });
-
-    if ($network_devices) {
-	$conf->set_alias($_, $module) foreach difference2([ detect_devices::getNet() ], $network_devices);
-    }
-
-    if (c::kernel_version() =~ /^\Q2.6/ && member($module, 'imm', 'ppa') 
-	&& ! -d "/proc/sys/dev/parport/parport0/devices/$module") {
-	log::l("$module loaded but is not useful, removing");
-	unload($module);
-	return;
-    }
-
-    $conf->set_options($module, $o_options) if $o_options;
-
-    when_load($conf, $module);
-}
-
-sub unload {
-    if ($::testing) {
-	log::l("rmmod $_") foreach @_;
-    } else {
-	run_program::run("rmmod", $_) foreach @_;
-    }
-}
-
-sub load_category {
-    my ($conf, $category, $o_wait_message) = @_;
-
-    my @try_modules = (
-      if_($category =~ /scsi/,
-	  if_(detect_devices::usbStorage(), 'usb-storage'),
-      ),
-      arch() =~ /ppc/ ? (
-	  if_($category =~ /scsi/,
-	    if_(detect_devices::has_mesh(), 'mesh'),
-	    if_(detect_devices::has_53c94(), 'mac53c94'),
-	  ),
-	  if_($category =~ /net/, 'bmac', 'gmac', 'mace', 'airport'),
-      ) : (),
-    );
-    grep {
-	$o_wait_message->($_->{description}, $_->{driver}) if $o_wait_message;
-	eval { load_and_configure($conf, $_->{driver}, $_->{options}) };
-	$_->{error} = $@;
-
-	$_->{try} = 1 if member($_->{driver}, 'hptraid', 'ohci1394'); #- do not warn when this fails
-
-	!($_->{error} && $_->{try});
-    } probe_category($category),
-      map { { driver => $_, description => $_, try => 1 } } @try_modules;
-}
-
-sub load_parallel_zip {
-    my ($conf) = @_;
-
-    arch() !~ /ppc/ or return;
-
-    eval { modules::load('parport_pc') };
-    grep { 
-	eval { modules::load_and_configure($conf, $_); 1 };
-    } 'imm', 'ppa';
-}
-
-sub probe_category {
-    my ($category) = @_;
-
-    my @modules = category2modules($category);
-
-    if_($category =~ /sound/ && arch() =~ /ppc/ && detect_devices::get_mac_model() !~ /IBM/,
-	{ driver => 'snd-powermac', description => 'Macintosh built-in' },
-    ),
-    grep {
-	if ($category eq 'network/isdn') {
-	    my $b = $_->{driver} =~ /ISDN:([^,]*),?([^,]*)(?:,firmware=(.*))?/;
-	    if ($b) {
-                $_->{driver} = $1;
-                $_->{type} = $2;
-                $_->{type} =~ s/type=//;
-                $_->{firmware} = $3;
-                $_->{driver} eq "hisax" and $_->{options} .= " id=HiSax";
-	    }
-	    $b;
-	} else {
-	    member($_->{driver}, @modules);
-	}
-    } detect_devices::probeall();
-}
-
-
-#-###############################################################################
-#- modules.conf functions
-#-###############################################################################
-sub write_preload_conf {
-    my ($conf) = @_;
-    my @l;
-    push @l, 'scsi_hostadapter' if $conf->get_probeall('scsi_hostadapter');
-    push @l, intersection([ list_modules::category2modules('multimedia/dvb'), list_modules::category2modules('multimedia/tv') ],
-			  [ map { $_->{driver} } detect_devices::probeall() ]);
-    push @l, map { if_($_->{driver} =~ /^Module:(.*)/, $1) } detect_devices::probeall();
-    push @l, 'nvram' if detect_devices::isLaptop();
-    push @l, map { $_->{driver} } probe_category('various/laptop');
-    push @l, map { $_->{driver} } probe_category('input/joystick');
-    push @l, map { $_->{driver} } probe_category('various/crypto');
-    push @l, 'padlock' if cat_("/proc/cpuinfo") =~ /rng_en/;
-    push @l, 'evdev' if detect_devices::getSynapticsTouchpads();
-    my @l_26 = @l;
-    push @l_26, map { $_->{driver} } probe_category('various/agpgart');
-    append_to_modules_loaded_at_startup("$::prefix/etc/modules", @l);
-    append_to_modules_loaded_at_startup("$::prefix/etc/modprobe.preload", @l_26);
-}
-
-sub append_to_modules_loaded_at_startup_for_all_kernels {
-    append_to_modules_loaded_at_startup($_, @_) foreach "$::prefix/etc/modules", "$::prefix/etc/modprobe.preload";
-}
-
-sub append_to_modules_loaded_at_startup {
-    my ($file, @l) = @_;
-    my $l = join '|', map { '^\s*' . $_ . '\s*$' } @l;
-    log::l("to put in $file ", join(", ", @l));
-
-    substInFile { 
-	$_ = '' if $l && /$l/;
-	$_ .= join '', map { "$_\n" } @l if eof;
-    } $file;
-}
-
-
-#-###############################################################################
-#- internal functions
-#-###############################################################################
-sub loaded_modules() { 
-    map { /(\S+)/ } cat_("/proc/modules");
-}
-sub remove_loaded_modules {
-    my (@l) = @_;
-    difference2([ uniq(@l) ], [ map { my $s = $_; $s =~ s/_/-/g; $s, $_ } loaded_modules() ]);
-}
-
-sub read_already_loaded { 
-    my ($conf) = @_;
-    when_load($conf, $_) foreach reverse loaded_modules();
-}
-
-my $module_extension = c::kernel_version() =~ /^\Q2.4/ ? 'o' : 'ko';
-
-sub name2file {
-    my ($name) = @_;
-    "$name.$module_extension";
-}
-
-sub when_load {
-    my ($conf, $name) = @_;
-
-    if (my $category = module2category($name)) {
-	when_load_category($conf, $name, $category);
-    }
-
-    if (my $above = $conf->get_above($name)) {
-	load($above); #- eg: for snd-pcm-oss set by set_sound_slot()
-    }
-}
-
-sub when_load_category {
-    my ($conf, $name, $category) = @_;
-
-    if ($category =~ m,disk/(ide|scsi|hardware_raid|sata|usb|firewire),) {
-	$conf->add_probeall('scsi_hostadapter', $name);
-	eval { load('sd_mod') };
-    } elsif ($category eq 'bus/usb') {
-	$conf->add_probeall('usb-interface', $name);
-        -f '/proc/bus/usb/devices' or eval {
-            require fs; fs::mount_usbfs('');
-            #- ensure keyboard is working, the kernel must do the job the BIOS was doing
-            sleep 4;
-            load("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-        };
-    } elsif ($category eq 'bus/firewire') {
-	$conf->set_alias('ieee1394-controller', $name);
-    } elsif ($category =~ /sound/) {
-	my $sound_alias = find { /^sound-slot-[0-9]+$/ && $conf->get_alias($_) eq $name } $conf->modules;
-	$sound_alias ||= 'sound-slot-0';
-	$conf->set_sound_slot($sound_alias, $name);
-    }
-}
-
-#-###############################################################################
-#- isInstall functions
-#-###############################################################################
-sub cz_file() { 
-    "/lib/modules" . (arch() eq 'sparc64' && "64") . ".cz-" . c::kernel_version();
-}
-
-sub extract_modules {
-    my ($dir, @modules) = @_;
-    my $cz = cz_file();
-    if (!-e $cz && !$::uml_install) {
-	unlink $_ foreach glob_("/lib/modules*.cz*");
-	require install_any;
-        install_any::getAndSaveFile("install/stage2/live$cz", $cz) or die "failed to get modules $cz: $!";
-    }
-    eval {
-	require packdrake;
-	my $packer = new packdrake($cz, quiet => 1);
-	$packer->extract_archive($dir, map { name2file($_) } @modules) if @modules;
-	map { $dir . '/' . name2file($_) } @modules;
-    };
-}
-
-sub load_raw_install {
-    my ($l, $options) = @_;
-
-    extract_modules('/tmp', @$l);
-    my @failed = grep {
-	my $m = '/tmp/' . name2file($_);
-	if (-e $m) {
-            my $stdout;
-            my $rc = run_program::run(["insmod_", "insmod"], '2>', \$stdout, $m, split(' ', $options->{$_}));
-            log::l(chomp_($stdout)) if $stdout;
-            if ($rc) {
-                unlink $m;
-                '';
-            } else {
-		'error';
-            }
-	} else {
-	    log::l("missing module $_");
-	    'error';
-	}
-    } @$l;
-
-    die "insmod'ing module " . join(", ", @failed) . " failed" if @failed;
-
-}
-
-1;
diff --git a/perl-install/modules/any_conf.pm b/perl-install/modules/any_conf.pm
deleted file mode 100644
index c6174fd81..000000000
--- a/perl-install/modules/any_conf.pm
+++ /dev/null
@@ -1,213 +0,0 @@
-package modules::any_conf; # $Id$
-
-use log;
-use common;
-
-
-sub vnew {
-    if (c::kernel_version() =~ /^\Q2.6/) {
-	require modules::modprobe_conf;
-	modules::modprobe_conf->new;
-    } else {
-	require modules::modules_conf;
-	modules::modules_conf->new;
-    }    
-}
-
-
-sub new {
-    my ($type) = @_;
-    bless {}, ref($type) || $type;
-}
-
-sub modules {
-    my ($conf) = @_;
-    keys %$conf;
-}
-
-sub get_alias {
-    my ($conf, $alias) = @_;
-    $conf->{$alias}{alias};
-}
-sub get_options {
-    my ($conf, $module) = @_;
-    $module = $conf->mapping($module);
-    $conf->{$module}{options};
-}
-sub set_options {
-    my ($conf, $module, $new_option) = @_;
-    $module = $conf->mapping($module);
-    log::explanations(qq(set option "$new_option" for module "$module"));
-    $conf->{$module}{options} = $new_option;
-}
-sub get_parameters {
-    my ($conf, $module) = @_;
-    $module = $conf->mapping($module);
-    map { if_(/(.*)=(.*)/, $1 => $2) } split(' ', $conf->get_options($module));
-}
-
-sub get_probeall {
-    my ($conf, $alias) = @_;
-    $conf->{$alias}{probeall};
-}
-sub _set_probeall {
-    my ($conf, $alias, $modules) = @_;
-    $conf->{$alias}{probeall} = $modules;
-    log::explanations("setting probeall $alias to $modules");
-}
-sub add_probeall {
-    my ($conf, $alias, $module) = @_;
-    $module = $conf->mapping($module);
-    my $modules = join(' ', uniq(split(' ', $conf->{$alias}{probeall}), $module));
-    _set_probeall($conf, $alias, $modules);
-}
-sub remove_probeall {
-    my ($conf, $alias, $module) = @_;
-    $module = $conf->mapping($module);
-    my $modules = join(' ', grep { $_ ne $module } split(' ', $conf->{$alias}{probeall}));
-    _set_probeall($conf, $alias, $modules);
-}
-
-sub set_alias { 
-    my ($conf, $alias, $module) = @_;
-    $module =~ /ignore/ and return;
-    $module = $conf->mapping($module);
-    /\Q$alias/ && $conf->{$_}{alias} && $conf->{$_}{alias} eq $module and return $_ foreach keys %$conf;
-    log::explanations("adding alias $alias to $module");
-    $conf->{$alias}{alias} = $module;
-    $alias;
-}
-
-
-sub remove_alias {
-    my ($conf, $name) = @_;
-    log::explanations(qq(removing alias "$name"));
-    $conf->remove_alias_regexp("^$name\$");
-}
-
-sub remove_alias_regexp {
-    my ($conf, $aliased) = @_;
-    log::explanations(qq(removing all aliases that match "$aliased"));
-    foreach (keys %$conf) {
-        delete $conf->{$_}{alias} if /$aliased/;
-    }
-}
-
-sub remove_alias_regexp_byname {
-    my ($conf, $name) = @_;
-    log::explanations(qq(removing all aliases which names match "$name"));
-    foreach (keys %$conf) {
-        delete $conf->{$_} if /$name/;
-    }
-}
-
-sub remove_module {
-    my ($conf, $module) = @_;
-    $module = $conf->mapping($module);
-    substInFile {
-        undef $_ if /^$module/;
-    } $_  foreach "$::prefix/etc/modules", "$::prefix/etc/modprobe.preload";
-    
-    $conf->remove_alias($module);
-    log::explanations("removing module $module");
-    delete $conf->{$module};
-    0;
-}
-
-sub set_sound_slot {
-    my ($conf, $alias, $module) = @_;
-    $module = $conf->mapping($module);
-    if (my $old = $conf->get_alias($alias)) {
-	$conf->set_above($old, undef);
-    }
-    $conf->set_alias($alias, $module);
-    $conf->set_above($module, 'snd-pcm-oss') if $module =~ /^snd-/;
-}
-
-
-sub read {
-    my (undef, $o_file) = @_;
-
-    my $conf = modules::any_conf::vnew();
-    $conf->read($o_file);
-}
-
-sub write {
-    my ($conf, $o_file) = @_;
-    my $file = $o_file || $::prefix . $conf->file;
-
-    my %written;
-
-    #- Substitute new config (if config has changed)
-    substInFile {
-	my ($type, $module, $val) = split(' ', chomp_($_), 3);
-	if ($type eq 'post-install' && $module eq 'supermount') {	    
-	    #- remove the post-install supermount stuff.
-	    $_ = '';
-	} elsif (member($type, $conf->handled_fields)) {
-	    my $new_val = $conf->{$module}{$type};
-	    if (!$new_val) {
-		$_ = '';
-	    } elsif ($new_val ne $val) {
-		$_ = "$type $module $new_val\n";
-	    }
-	}
-	$written{$module}{$type} = 1;
-    } $file;
-
-    my $to_add;
-    while (my ($module, $h) = each %$conf) {
-	while (my ($type, $v) = each %$h) {
-	    if ($v && !$written{$module}{$type}) {
-		$to_add .= "$type $module $v\n";
-	    }
-	}
-    }
-    append_to_file($file, $to_add);
-
-    modules::write_preload_conf($conf);
-}
-
-
-
-
-################################################################################
-sub read_handled {
-    my ($conf, $o_file) = @_;
-    my $file = $o_file || $::prefix . $conf->file;
-    my $raw_conf = modules::any_conf::read_raw($file);
-
-    foreach my $module (keys %$raw_conf) {
-	my $raw = $raw_conf->{$module};
-	my $keep = $conf->{$module} = {};
-	foreach ($conf->handled_fields) {
-	    $keep->{$_} = $raw->{$_} if $raw->{$_};
-	}
-    }
-
-    $conf;
-}
-
-sub read_raw {
-    my ($file) = @_;
-    my %c;
-
-    foreach (cat_($file)) {
-	next if /^\s*#/;
-	s/#.*$//;
-	s/\s+$//;
-
-	s/\b(snd-card-)/snd-/g;
-	s/\b(snd-via686|snd-via8233)\b/snd-via82xx/g;
-
-	my ($type, $module, $val) = split(' ', $_, 3) or next;
-
-	$c{$module}{$type} = $val;
-    }
-
-    #- NB: not copying alias options to the module anymore, hopefully not useful :)
-
-    \%c;
-}
-
-1;
diff --git a/perl-install/modules/interactive.pm b/perl-install/modules/interactive.pm
deleted file mode 100644
index fb4bcfda2..000000000
--- a/perl-install/modules/interactive.pm
+++ /dev/null
@@ -1,162 +0,0 @@
-package modules::interactive;
-use interactive;
-use modules;
-use common;
-
-sub config_window {
-    my ($in, $data) = @_;
-    require modules;
-    my $modules_conf = modules::any_conf->read;
-    my %conf = $modules_conf->get_parameters($data->{driver});
-    require modules::parameters;
-    my @l;
-    foreach (modules::parameters::parameters($data->{driver})) {
-	   my ($name, $format, $description) = @$_;
-	   push @l, { label => $name, help => join("\n", $description, if_(c::kernel_version() !~ /^\Q2.6/, "[$format]")),
-                                                val => \$conf{$name}, allow_empty_list => 1 };
-    }
-    # BUG: once we've released mdk9.2 and unfreeze cooker, morph this
-    #      into a proper error dialog with a nice error message (but
-    #      for now we cannot due to string freeze :-()
-    @l = { label => N("Parameters"), help => "", val => N("NONE"), allow_empty_list => 1 } if !@l;
-    if ($in->ask_from(N("Module configuration"), N("You can configure each parameter of the module here."), \@l)) {
-	   my $options = join(' ', map { if_($conf{$_}, "$_=$conf{$_}") } keys %conf);
-	   if ($options) {
-	       $modules_conf->set_options($data->{driver}, $options);
-	       $modules_conf->write;
-	   }
-    }
-}
-
-sub load_category {
-    my ($in, $modules_conf, $category, $b_auto, $b_at_least_one) = @_;
-
-    my @l;
-    {
-	my $w;
-	my $wait_message = sub { undef $w; $w = wait_load_module($in, $category, @_) };
-	@l = modules::load_category($modules_conf, $category, $wait_message);
-	undef $w; #- help perl_checker
-    }
-    if (my @err = grep { $_ } map { $_->{error} } @l) {
-	my $return = $in->ask_warn('', join("\n", @err));
-	$in->exit(1) if !defined($return);
-    }
-    return @l if $b_auto && (@l || !$b_at_least_one);
-
-    @l = map { $_->{description} } @l;
-
-    if ($b_at_least_one && !@l) {
-	@l = load_category__prompt($in, $modules_conf, $category) or return;
-    }
-
-    load_category__prompt_for_more($in, $modules_conf, $category, @l);
-}
-
-sub load_category__prompt_for_more {
-    my ($in, $modules_conf, $category, @l) = @_;
-
-    (my $msg_type = $category) =~ s/\|.*//;
-
-    while (1) {
-	my $msg = @l ?
-	  [ N("Found %s interfaces", join(", ", map { qq("$_") } @l)),
-	    N("Do you have another one?") ] :
-	  N("Do you have any %s interfaces?", $msg_type);
-
-	my $r = 'No';
-	$in->ask_from_({ messages => $msg,
-			 if_($category =~ m!disk/.*(ide|sata|scsi|hardware_raid|usb|firewire)!, interactive_help_id => 'setupSCSI'),
-		       }, 
-		       [ { list => [ N_("Yes"), N_("No"), N_("See hardware info") ], val => \$r, type => 'list', format => \&translate } ]);
-	if ($r eq "No") { return @l }
-	if ($r eq "Yes") {
-	    push @l, load_category__prompt($in, $modules_conf, $category) || next;
-	} else {
-	    $in->ask_warn('', join("\n", detect_devices::stringlist()));
-	}
-    }
-}
-
-my %category2text = (
-    'bus/usb' => N_("Installing driver for USB controller"),
-    'bus/firewire' => N_("Installing driver for firewire controller %s"),
-    'disk/ide|scsi|hardware_raid|sata|firewire' => N_("Installing driver for hard drive controller %s"),
-    list_modules::ethernet_categories() => N_("Installing driver for ethernet controller %s"),
-);
-
-sub wait_load_module {
-    my ($in, $category, $text, $module) = @_;
-    my $msg = do {
-	if (my $t = $category2text{$category}) {
-	    sprintf(translate($t), $text);
-	} else {
-	    #-PO: the first %s is the card type (scsi, network, sound,...)
-	    #-PO: the second is the vendor+model name
-	    N("Installing driver for %s card %s", $category, $text);
-	}
-    };
-    $in->wait_message('', [ $msg, if_($::expert, N("(module %s)", $module)) ]);
-}
-
-sub load_module__ask_options {
-    my ($in, $module_descr, $parameters) = @_;
-
-    my @parameters = map { [ @$_[0, 1, 2] ] } @$parameters;
-
-    if (@parameters) {
-	$in->ask_from('', 
-		      N("You may now provide options to module %s.\nNote that any address should be entered with the prefix 0x like '0x123'", $module_descr), 
-		      [ map { { label => $_->[0] . ($_->[1] ? " ($_->[1])" : ''), help => $_->[2], val => \$_->[3] } } @parameters ],
-		     ) or return;
-	join(' ', map { if_($_->[3], "$_->[0]=$_->[3]") } @parameters);
-    } else {
-	my $s = $in->ask_from_entry('',
-N("You may now provide options to module %s.
-Options are in format ``name=value name2=value2 ...''.
-For instance, ``io=0x300 irq=7''", $module_descr), N("Module options:")) or return;
-	$s;
-    }
-}
-
-sub load_category__prompt {
-    my ($in, $modules_conf, $category) = @_;
-
-    (my $msg_type = $category) =~ s/\|.*//;
-
-    my %available_modules = map_each { my $dsc = $::b; $dsc =~ s/\s+/ /g; $::a => $dsc ? "$::a ($dsc)" : $::a } modules::category2modules_and_description($category);
-    my $module = $in->ask_from_listf('',
-#-PO: the %s is the driver type (scsi, network, sound,...)
-			       N("Which %s driver should I try?", $msg_type),
-			       sub { $available_modules{$_[0]} },
-			       [ keys %available_modules ]) or return;
-    my $module_descr = $available_modules{$module};
-
-    my $options;
-    require modules::parameters;
-    my @parameters = modules::parameters::parameters($module);
-    if (@parameters && $in->ask_from_list_('',
-formatAlaTeX(N("In some cases, the %s driver needs to have extra information to work
-properly, although it normally works fine without them. Would you like to specify
-extra options for it or allow the driver to probe your machine for the
-information it needs? Occasionally, probing will hang a computer, but it should
-not cause any damage.", $module_descr)), [ N_("Autoprobe"), N_("Specify options") ], 'Autoprobe') ne 'Autoprobe') {
-	$options = load_module__ask_options($in, $module_descr, \@parameters) or return;
-    }
-    while (1) {
-	eval {
-	    my $_w = wait_load_module($in, $category, $module_descr, $module);
-	    log::l("user asked for loading module $module (type $category, desc $module_descr)");
-	    modules::load_and_configure($modules_conf, $module, $options);
-	};
-	return $module_descr if !$@;
-
-	$in->ask_yesorno('',
-N("Loading module %s failed.
-Do you want to try again with other parameters?", $module_descr), 1) or return;
-
-	$options = load_module__ask_options($in, $module_descr, \@parameters) or return;
-    }
-}
-
-1;
diff --git a/perl-install/modules/modprobe_conf.pm b/perl-install/modules/modprobe_conf.pm
deleted file mode 100644
index b2a57717d..000000000
--- a/perl-install/modules/modprobe_conf.pm
+++ /dev/null
@@ -1,163 +0,0 @@
-package modules::modprobe_conf; # $Id$
-
-use log;
-use common;
-
-our @ISA = qw(modules::any_conf);
-
-
-sub file { '/etc/modprobe.conf' }
-sub handled_fields { qw(alias options install remove) }
-
-sub mapping {
-    my ($_conf, @modules) = @_;
-    my @l = map { modules::mapping_24_26($_) } @modules;
-    wantarray() ? @l : $l[0];
-}
-
-sub get_above {
-    my ($conf, $module) = @_;
-    $module = $conf->mapping($module);
-
-    my (undef, $after) = parse_non_virtual($module, $conf->{$module}{install}) or return;
-    my ($l, $_other_cmds) = partition_modprobes($after);
-    join(' ', @$l);
-}
-sub set_above {
-    my ($conf, $module, $o_modules) = @_;
-    $module = $conf->mapping($module);
-    my @modules = $conf->mapping(split(' ', $o_modules || ''));
-
-    { #- first add to "install" command
-	my ($before, $after) = parse_non_virtual($module, $conf->{$module}{install});
-	my ($_previous_modules, $other_cmds) = partition_modprobes($after || '');
-	$after = join('; ', @$other_cmds, map { "/sbin/modprobe $_" } @modules);
-	$conf->{$module}{install} = unparse_non_virtual($module, '--ignore-install', $before, $after);
-    }
-    { #- then to "remove" command
-	my ($before, $after) = parse_non_virtual($module, $conf->{$module}{remove});
-	my ($_previous_modules, $other_cmds) = partition_modprobes($before || '');
-	$before = join('; ', @$other_cmds, map { "/sbin/modprobe -r $_" } @modules);
-	$conf->{$module}{remove} = unparse_non_virtual($module, '-r --ignore-remove', $before, $after);
-    }
-}
-
-sub create_from_old() {
-    #- use module-init-tools script
-    run_program::rooted($::prefix, "/sbin/generate-modprobe.conf", ">", file());
-}
-
-sub read {
-    my ($type, $o_file) = @_;
-
-    my $file = $o_file || do {
-	my $f = $::prefix . file();
-	if (!-e $f && -e "$::prefix/etc/modules.conf") {
-	    create_from_old();
-	}
-	$f;
-    };
-
-    my $conf = modules::any_conf::read_handled($type, $file);
-
-    extract_probeall_field($conf);
-
-    $conf;
-}
-
-sub write {
-    my ($conf, $o_file) = @_;
-
-    remove_probeall_field($conf);
-
-    my $_b = before_leaving { extract_probeall_field($conf) };
-
-    modules::any_conf::write($conf, $o_file);
-}
-
-
-
-################################################################################
-sub remove_braces {
-    my ($s) = @_;
-    $s =~ s/^\s*\{\s*(.*)\s*;\s*\}\s*$/$1/;
-    $s;
-}
-
-sub parse_non_virtual {
-    my ($module, $s) = @_;
-    my ($before, $options, $after) = 
-      $s =~ m!^(?:(.*);)?
-              \s*(?:/sbin/)?modprobe\s+(-\S+\s+)*\Q$module\E
-              \s*(?:&&\s*(.*))?$!x 
-		or return;
-    $options =~ /--ignore-(install|remove)\b/ or return;
-
-    ($before, $after) = map { remove_braces($_ || '') } $before, $after;
-    $after =~ s!\s*;\s*/bin/true$!!;
-
-    $before, $after;
-}
-
-sub unparse_non_virtual {
-    my ($module, $mode, $before, $after) = @_;
-    ($before ? "$before; " : '')
-      . "/sbin/modprobe --first-time $mode $module" 
-	. ($after ? " && { $after; /bin/true; }" : '');    
-}
-
-sub partition_modprobes {
-    my ($s) = @_;
-
-    my (@modprobes, @other_cmds);
-    my @l = split(/\s*;\s*/, $s);
-    foreach (@l) {
-	if (m!^(?:/sbin/)?modprobe\s+(?:-r\s+)?(\S+)$!) {
-	    push @modprobes, $1;
-	} else {
-	    push @other_cmds, $1;
-	}
-    }
-    \@modprobes, \@other_cmds;
-}
-
-sub parse_for_probeall {
-    my ($module, $s) = @_;
-
-    parse_non_virtual($module, $s) and return;
-    if ($s =~ /[{&|]/) {
-	log::l("weird install line in modprobe.conf for $module: $s");
-	return;
-    }
-    $s ne '/bin/true' or return; #- we have "alias $module off" here
-
-    $s =~ s!\s*;\s*/bin/true$!!;
-
-    my ($l, $other_cmds) = partition_modprobes($s);
-
-    @$other_cmds ? undef : $l;
-}
-
-sub extract_probeall_field {
-    my ($conf) = @_;
-
-    foreach my $module (keys %$conf) {
-	$conf->{$module}{install} or next;
-	my $l = parse_for_probeall($module, $conf->{$module}{install}) or next;
-
-	$conf->{$module}{probeall} = join(' ', @$l);
-	delete $conf->{$module}{install};
-    }
-}
-
-sub remove_probeall_field {
-    my ($conf) = @_;
-
-    foreach my $module (keys %$conf) {
-	my $modules = delete $conf->{$module}{probeall} or next;
-
-	$conf->{$module}{install} = join('; ', (map { "/sbin/modprobe $_" }    split(' ', $modules)), '/bin/true');
-    }
-}
-
-1;
diff --git a/perl-install/modules/modules_conf.pm b/perl-install/modules/modules_conf.pm
deleted file mode 100644
index afcf08b35..000000000
--- a/perl-install/modules/modules_conf.pm
+++ /dev/null
@@ -1,70 +0,0 @@
-package modules::modules_conf; # $Id$
-
-use log;
-use common;
-
-our @ISA = qw(modules::any_conf);
-
-
-sub file { '/etc/modules.conf' }
-sub handled_fields { qw(alias above options probeall) }
-
-sub mapping {
-    my ($_conf, @modules) = @_;
-    my @l = map { modules::mapping_26_24($_) } @modules;
-    wantarray() ? @l : $l[0];
-}
-
-sub get_above {
-    my ($conf, $module) = @_;
-    $module = $conf->mapping($module);
-
-    $conf->{$module} && $conf->{$module}{above};
-}
-sub set_above {
-    my ($conf, $module, $o_modules) = @_;
-    $module = $conf->mapping($module);
-
-    if ($o_modules) {
-	my $modules = join(' ', $conf->mapping(split(' ', $o_modules)));
-	$conf->{$module}{above} = $modules;
-    } else {
-	delete $conf->{$module}{above};
-    }
-}
-
-sub read {
-    my ($type, $o_file) = @_;
-
-    my $conf = modules::any_conf::read_handled($type, $o_file);
-
-    #- convert old aliases to new probeall
-    foreach my $name ('scsi_hostadapter', 'usb-interface') {
-	my @old_aliases = 
-	  map { $_->[0] } sort { $a->[1] <=> $b->[1] } 
-	  map { if_(/^$name(\d*)/ && $conf->{$_}{alias}, [ $_, $1 || 0 ]) } keys %$conf;
-	foreach my $alias (@old_aliases) {
-	    $conf->add_probeall($name, delete $conf->{$alias}{alias});
-	}
-    }
-
-    $conf;
-}
-
-sub write {
-    my ($conf, $o_file) = @_;
-    my $file = $o_file || do {
-	my $f = $::prefix . file();
-	rename "$::prefix/etc/conf.modules", $f; #- make the switch to new name if needed
-	$f;
-    };
-
-    modules::any_conf::write($conf, $file);
-
-    if ($::isInstall) {
-	require modules::modprobe_conf;
-	modules::modprobe_conf::create_from_old();
-    }
-}
-
-1;
diff --git a/perl-install/modules/parameters.pm b/perl-install/modules/parameters.pm
deleted file mode 100644
index fa8fcfae7..000000000
--- a/perl-install/modules/parameters.pm
+++ /dev/null
@@ -1,60 +0,0 @@
-package modules::parameters; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-
-
-sub parameters {
-  my ($module) = @_;
-
-  if (!$::isStandalone && !$::testing) {
-      ($module) = modules::extract_modules('/tmp', $module);
-  }
-
-  my @parameters;
-  foreach (common::join_lines(run_program::get_stdout('modinfo', '-p', $module))) {
-      chomp;
-      next if /^warning:/;
-      (my $name, $_) = /(\w+)(?::|\s+)(.*)/s or warn "modules::parameters::get_options_name($module): unknown line\n";
-      if (c::kernel_version() =~ /^\Q2.6/) {
-          push @parameters, [ $name, '', $_ ];
-          next;
-      }
-
-      my $c_types = 'int|string|short|byte|char|long';
-      my ($is_a_number, $description, $min, $max) = (0, '', 1, 1);
-      if (/^($c_types) array \(min = (\d+), max = (\d+)\),?\s*(.*)/s) {
-	  $_ = $4;
-	  #- seems like "char" are buggy entries
-	  ($is_a_number, $min, $max) = ($1 ne 'string', $2, $3) if $1 ne 'char'; 
-      } elsif (/^($c_types),?\s*(.*)/s) {
-	  $_ = $2;
-	  #- here "char" really are size-limited strings, modinfo does not display the size limit (but since we do not care about it, it does not matter :)
-	  $is_a_number = $1 ne 'string' if $1 ne 'char';
-      } else {
-	  #- for things like "no format character" or "unknown format character"
-      }
-      if (/^description "(.*)",?\s*/s) {
-	  ($description, $_) = ($1, $2);
-      }
-      #- print "STILL HAVE ($_)\n" if $_;
-
-	 my $format = $min == 1 && $max == 1 ?
-		($is_a_number ? N("a number") : '') :
-		$min == $max ? 
-		($is_a_number ? N("%d comma separated numbers", $min) : N("%d comma separated strings", $min)) :
-		$min == 1 ?
-		($is_a_number ? N("comma separated numbers") : N("comma separated strings")) :
-		''; #- too weird and buggy, do not display it
-    push @parameters, [ $name, $format, $description ];
-  }
-  @parameters;
-}
-
-1;
diff --git a/perl-install/mouse.pm b/perl-install/mouse.pm
deleted file mode 100644
index f11fcc3d5..000000000
--- a/perl-install/mouse.pm
+++ /dev/null
@@ -1,641 +0,0 @@
-package mouse; # $Id$
-
-#use diagnostics;
-#use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use modules;
-use detect_devices;
-use run_program;
-use devices;
-use modules;
-use any;
-use log;
-
-my @mouses_fields = qw(nbuttons MOUSETYPE XMOUSETYPE name EMULATEWHEEL);
-
-my %mice = 
- arch() =~ /^sparc/ ? 
-(
- 'sunmouse' =>
- [ [ 'sunmouse' ],
-   [ [ 3, 'sun', 'sun', N_("Sun - Mouse") ]
-   ] ]
-) :
-(
- 'PS/2' => 
- [ [ 'psaux' ],
-   [ [ 2, 'ps/2', 'PS/2', N_("Standard") ],
-     [ 5, 'ps/2', 'MouseManPlusPS/2', N_("Logitech MouseMan+") ],
-     [ 5, 'imps2', 'IMPS/2', N_("Generic PS2 Wheel Mouse") ],
-     [ 5, 'ps/2', 'GlidePointPS/2', N_("GlidePoint") ],
-     if_(c::kernel_version() !~ /^\Q2.6/,
-       [ 5, 'imps2', 'auto', N_("Automatic") ]
-	 ),
-     '',
-     [ 5, 'ps/2', 'ThinkingMousePS/2', N_("Kensington Thinking Mouse") ],
-     [ 5, 'netmouse', 'NetMousePS/2', N_("Genius NetMouse") ],
-     [ 5, 'netmouse', 'NetScrollPS/2', N_("Genius NetScroll") ],
-     [ 7, 'ps/2', 'ExplorerPS/2', N_("Microsoft Explorer") ],
-   ] ],
-     
- 'USB' =>
- [ [ 'usbmouse' ],
-   [ [ 1, 'ps/2', 'IMPS/2', N_("1 button") ],
-     [ 2, 'ps/2', 'IMPS/2', N_("Generic 2 Button Mouse") ],
-     [ 3, 'ps/2', 'IMPS/2', N_("Generic") ],
-     [ 3, 'ps/2', 'IMPS/2', N_("Generic 3 Button Mouse with Wheel emulation"), 'wheel' ],
-     [ 5, 'ps/2', 'IMPS/2', N_("Wheel") ],
-     [ 7, 'ps/2', 'ExplorerPS/2', N_("Microsoft Explorer") ],
-   ] ],
-
- N_("serial") =>
- [ [ map { "ttyS$_" } 0..3 ],
-   [ [ 2, 'Microsoft', 'Microsoft', N_("Generic 2 Button Mouse") ],
-     [ 3, 'Microsoft', 'Microsoft', N_("Generic 3 Button Mouse") ],
-     [ 3, 'Microsoft', 'Microsoft', N_("Generic 3 Button Mouse with Wheel emulation"), 'wheel' ],
-     [ 5, 'ms3', 'IntelliMouse', N_("Microsoft IntelliMouse") ],
-     [ 3, 'MouseMan', 'MouseMan', N_("Logitech MouseMan") ],
-     [ 3, 'MouseMan', 'MouseMan', N_("Logitech MouseMan with Wheel emulation"), 'wheel' ],
-     [ 2, 'MouseSystems', 'MouseSystems', N_("Mouse Systems") ],     
-     '',
-     [ 3, 'logim', 'MouseMan', N_("Logitech CC Series") ],
-     [ 3, 'logim', 'MouseMan', N_("Logitech CC Series with Wheel emulation"), 'wheel' ],
-     [ 5, 'pnp', 'IntelliMouse', N_("Logitech MouseMan+/FirstMouse+") ],
-     [ 5, 'ms3', 'IntelliMouse', N_("Genius NetMouse") ],
-     [ 2, 'MMSeries', 'MMSeries', N_("MM Series") ],
-     [ 2, 'MMHitTab', 'MMHittab', N_("MM HitTablet") ],
-     [ 3, 'Logitech', 'Logitech', N_("Logitech Mouse (serial, old C7 type)") ],
-     [ 3, 'Logitech', 'Logitech', N_("Logitech Mouse (serial, old C7 type) with Wheel emulation"), 'wheel' ],
-     [ 3, 'Microsoft', 'ThinkingMouse', N_("Kensington Thinking Mouse") ],
-     [ 3, 'Microsoft', 'ThinkingMouse', N_("Kensington Thinking Mouse with Wheel emulation"), 'wheel' ],
-   ] ],
-
- N_("busmouse") =>
- [ [ arch() eq 'ppc' ? 'adbmouse' : ('atibm', 'inportbm', 'logibm') ],
-   [ if_(arch() eq 'ppc', [ 1, 'Busmouse', 'BusMouse', N_("1 button") ]),
-     [ 2, 'Busmouse', 'BusMouse', N_("2 buttons") ],
-     [ 3, 'Busmouse', 'BusMouse', N_("3 buttons") ],
-     [ 3, 'Busmouse', 'BusMouse', N_("3 buttons with Wheel emulation"), 'wheel' ],
-   ] ],
-
-    if_(c::kernel_version() =~ /^\Q2.6/,
- N_("Universal") =>
- [ [ 'input/mice' ],
-   [ [ 7, 'ps/2', 'ExplorerPS/2', N_("Any PS/2 & USB mice") ],
-     if_(is_xbox(), [ 5, 'ps/2', 'IMPS/2', N_("Microsoft Xbox Controller S") ]),
-   ] ],
-    ),
-
- N_("none") =>
- [ [ 'none' ],
-   [ [ 0, 'none', 'Microsoft', N_("No mouse") ],
-   ] ],
-);
-
-
-sub xmouse2xId { 
-    #- xmousetypes must be sorted as found in /usr/include/X11/extensions/xf86misc.h
-    #- so that first mean "0", etc
-    my @xmousetypes = (
-		   "Microsoft",
-		   "MouseSystems",
-		   "MMSeries",
-		   "Logitech",
-		   "BusMouse", #MouseMan,
-		   "Logitech",
-		   "PS/2",
-		   "MMHittab",
-		   "GlidePoint",
-		   "IntelliMouse",
-		   "ThinkingMouse",
-		   "IMPS/2",
-		   "ThinkingMousePS/2",
-		   "MouseManPlusPS/2",
-		   "GlidePointPS/2",
-		   "NetMousePS/2",
-		   "NetScrollPS/2",
-		   "SysMouse",
-		   "Auto",
-		   "AceCad",
-		   "ExplorerPS/2",
-		   "USB",
-    );
-    my ($id) = @_;
-    $id = 'BusMouse' if $id eq 'MouseMan';
-    $id = 'IMPS/2' if $id eq 'ExplorerPS/2' && $::isInstall;
-    eval { find_index { $_ eq $id } @xmousetypes } || 0;
-}
-
-my %mouse_btn_keymap = (
-    0   => "NONE",
-    67  => "F9",
-    68  => "F10",
-    87  => "F11",
-    88  => "F12",
-    85  => "F13",
-    89  => "F14",
-    90  => "F15",
-    56  => "L-Option/Alt",
-    125 => "L-Command (Apple)",
-    98  => "Num: /",
-    55  => "Num: *",
-    117 => "Num: =",
-    96 => "Enter",
-);
-sub ppc_one_button_keys() { keys %mouse_btn_keymap }
-sub ppc_one_button_key2text { $mouse_btn_keymap{$_[0]} }
-
-sub raw2mouse {
-    my ($type, $raw) = @_;
-    $raw or return;
-
-    my %l; @l{@mouses_fields} = @$raw;
-    +{ %l, type => $type };
-}
-
-sub fullnames() { 
-    map_each { 
-	my $type = $::a;
-	grep { $_ } map {
-	    if ($_) {
-		my $l = raw2mouse($type, $_);
-		"$type|$l->{name}";
-	    } else { 
-		$type .= "|[" . N("Other") . "]";
-		'';
-	    }
-	} @{$::b->[1]};
-    } %mice;
-}
-
-sub fullname2mouse {
-    my ($fname, %opts) = @_;
-    my ($type, @l) = split '\|', $fname;
-    my $name = pop @l;
-  search:
-    $opts{device} ||= $mice{$type}[0][0];
-    foreach (@{$mice{$type}[1]}) {
-	my $l = raw2mouse($type, $_);
-	$name eq $l->{name} and return { %$l, %opts };
-    }
-    if ($name eq '1 Button' || $name eq '1 button') {
-	$name = "Generic 2 Button Mouse";
-	goto search;
-    }
-    die "$fname not found ($type, $name)";
-}
-
-sub serial_ports() { map { "ttyS$_" } 0..7 }
-sub serial_port2text {
-    $_[0] =~ /ttyS(\d+)/ ? "$_[0] / COM" . ($1 + 1) : $_[0];
-}
-
-sub read() {
-    my %mouse = getVarsFromSh "$::prefix/etc/sysconfig/mouse";
-    eval { add2hash_(\%mouse, fullname2mouse($mouse{FULLNAME})) };
-    $mouse{nbuttons} ||= $mouse{XEMU3} eq "yes" ? 2 : $mouse{WHEEL} eq "yes" ? 5 : 3;
-    \%mouse;
-}
-
-sub write {
-    my ($do_pkgs, $mouse) = @_;
-    local $mouse->{FULLNAME} = qq("$mouse->{type}|$mouse->{name}"); #-"
-    local $mouse->{XEMU3} = bool2yesno($mouse->{nbuttons} < 3);
-    local $mouse->{WHEEL} = bool2yesno($mouse->{nbuttons} > 3);
-    setVarsInSh("$::prefix/etc/sysconfig/mouse", $mouse, qw(MOUSETYPE XMOUSETYPE FULLNAME XEMU3 WHEEL device));
-    any::devfssymlinkf($mouse, 'mouse');
-
-    #- we should be using input/mice directly instead of usbmouse, but legacy...
-    symlinkf 'input/mice', "$::prefix/dev/usbmouse" if $mouse->{device} eq "usbmouse";
-
-    any::devfssymlinkf($mouse->{auxmouse}, 'mouse1') if $mouse->{auxmouse};
-
-
-    various_xfree_conf($do_pkgs, $mouse);
-
-    if (arch() =~ /ppc/) {
-	my $s = join('',
-	  "dev.mac_hid.mouse_button_emulation = " . to_bool($mouse->{button2_key} || $mouse->{button3_key}) . "\n",
-	  if_($mouse->{button2_key}, "dev.mac_hid.mouse_button2_keycode = $mouse->{button2_key}\n"),
-	  if_($mouse->{button3_key}, "dev.mac_hid.mouse_button3_keycode = $mouse->{button3_key}\n"),
-	);
-	substInFile { 
-	    $_ = '' if /^\Qdev.mac_hid.mouse_button/;
-	    $_ .= $s if eof;
-	} "$::prefix/etc/sysctl.conf";
-    }
-}
-
-sub probe_wacom_devices {
-    my ($modules_conf) = @_;
-
-    $modules_conf->get_probeall("usb-interface") or return;
-    my (@l) = detect_devices::usbWacom() or return;
-
-    log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
-    my @wacom = eval { 
-	modules::load("wacom", "evdev");
-	grep { detect_devices::tryOpen($_) } map_index { "input/event$::i" } @l;
-    };
-    @wacom or eval { modules::unload("evdev", "wacom") };
-    @wacom;
-}
-
-sub detect_serial() {
-    my ($t, $mouse, @wacom);
-
-    #- Whouah! probing all devices from ttyS0 to ttyS3 once a time!
-    detect_devices::probeSerialDevices();
-
-    #- check new probing methods keep everything used here intact!
-    foreach (0..3) {
-	$t = detect_devices::probeSerial("/dev/ttyS$_") or next;
-	if ($t->{CLASS} eq 'MOUSE') {
-	    $t->{MFG} ||= $t->{MANUFACTURER};
-
-	    $mouse = fullname2mouse("serial|Microsoft IntelliMouse") if $t->{MFG} eq 'MSH' && $t->{MODEL} eq '0001';
-	    $mouse = fullname2mouse("serial|Logitech MouseMan") if $t->{MFG} eq 'LGI' && $t->{MODEL} =~ /^80/;
-	    $mouse = fullname2mouse("serial|Genius NetMouse") if $t->{MFG} eq 'KYE' && $t->{MODEL} eq '0003';
-
-	    $mouse ||= fullname2mouse("serial|Generic 2 Button Mouse"); #- generic by default.
-	    $mouse->{device} = "ttyS$_";
-	    last;
-	} elsif ($t->{CLASS} eq "PEN" || $t->{MANUFACTURER} eq "WAC") {
-	    push @wacom, "ttyS$_";
-	}
-    }
-    $mouse, @wacom;
-}
-
-sub detect {
-    my ($modules_conf) = @_;
-
-    # let more USB tablets and touchscreens magically work at install time
-    # through /dev/input/mice multiplexing:
-    modules::probe_category('input/tablet');
-    modules::probe_category('input/touchscreen');
-
-    if (arch() =~ /^sparc/) {
-	return fullname2mouse("sunmouse|Sun - Mouse");
-    }
-    if (arch() eq "ppc") {
-        return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? 
-			      "USB|1 button" :
-			      # No need to search for an ADB mouse.  If I did, the PPC kernel would
-			      # find one whether or not I had one installed!  So..  default to it.
-			      "busmouse|1 button");
-    }
-
-    my @wacom = probe_wacom_devices($modules_conf);
-
-    if (c::kernel_version() =~ /^\Q2.6/) {
-	$modules_conf->get_probeall("usb-interface") and eval { modules::load('usbhid') };
-        if (cat_('/proc/bus/input/devices') =~ /^H: Handlers=mouse/m) {
-            if (is_xbox()) {
-                return fullname2mouse('Universal|Microsoft Xbox Controller S');
-            }
-            my $univ_mouse = fullname2mouse('Universal|Any PS/2 & USB mice', wacom => \@wacom);
-            if (my ($synaptics_touchpad) = detect_devices::getSynapticsTouchpads()) {
-                $univ_mouse->{auxmouse} = {
-                                           name => N_("Synaptics Touchpad"),
-                                           device => 'input/mice',
-                                           XMOUSETYPE => 'auto-dev',
-                                           ALPS => $synaptics_touchpad->{description} =~ /ALPS/,
-                                          };
-            }
-	    return $univ_mouse;
-	}
-    } else {
-	my $ps2_mouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Automatic", unsafe => 0);
-
-	#- workaround for some special case were mouse is openable 1/2.
-	if (!$ps2_mouse) {
-	    $ps2_mouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Automatic", unsafe => 0);
-	    $ps2_mouse and detect_devices::hasMousePS2("psaux"); #- fake another open in order for XFree to see the mouse.
-	}
-
-	if ($modules_conf->get_probeall("usb-interface")) {
-	    sleep 2;
-	    if (my (@l) = detect_devices::usbMice()) {
-		log::l(join('', "found usb mouse $_->{driver} $_->{description} (", if_($_->{type}, $_->{type}), ")")) foreach @l;
-		if (eval { modules::load(qw(hid mousedev usbmouse)); detect_devices::tryOpen("usbmouse") }) {
-		    return fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Wheel",
-					  if_($ps2_mouse, auxmouse => $ps2_mouse), #- for laptop, we kept the PS/2 as secondary (symbolic).
-					  wacom => \@wacom);
-		    
-		}
-		eval { modules::unload(qw(usbmouse mousedev hid)) };
-	    }
-	} else {
-	    log::l("no usb interface found for mice");
-	}
-	if ($ps2_mouse) {
-	    return { wacom => \@wacom, %$ps2_mouse };
-	}
-    }
-
-    #- probe serial device to make sure a wacom has been detected.
-    eval { modules::load("serial") };
-    my ($serial_mouse, @serial_wacom) = detect_serial(); push @wacom, @serial_wacom;
-    if ($serial_mouse) {
-	{ wacom => \@wacom, %$serial_mouse };
-    } elsif (@wacom) {
-	#- in case only a wacom has been found, assume an inexistant mouse (necessary).
-	fullname2mouse('none|No mouse', wacom => \@wacom);
-    } elsif (c::kernel_version() =~ /^\Q2.6/) {
-	fullname2mouse('Universal|Any PS/2 & USB mice', unsafe => 1);
-    } else {
-	fullname2mouse("PS/2|Automatic", unsafe => 1);
-    }
-}
-
-sub load_modules {
-    my ($mouse) = @_;
-    my @l;
-    for ($mouse->{type}) {
-	/serial/ and @l = qw(serial);
-	/USB/    and @l = qw(hid mousedev usbmouse);
-    }
-    foreach (@{$mouse->{wacom}}) {
-	/ttyS/   and push @l, qw(serial);
-	/event/  and push @l, qw(wacom evdev);
-    }
-    if ($mouse->{auxmouse} && $mouse->{auxmouse}{name} eq N_("Synaptics Touchpad")) {
-	push @l, qw(evdev);
-    }
-    eval { modules::load(@l) };
-}
-
-sub set_xfree_conf {
-    my ($mouse, $xfree_conf, $b_keep_auxmouse_unchanged) = @_;
-
-    my ($synaptics, $mouse_) = partition { $_->{name} eq N_("Synaptics Touchpad") } ($mouse, if_($mouse->{auxmouse}, $mouse->{auxmouse}));
-    my @mice = map {
-	{
-	    Protocol => $_->{XMOUSETYPE},
-	    Device => "/dev/mouse",
-	    if_($_->{nbuttons} > 3, ZAxisMapping => [ $_->{nbuttons} > 5 ? '6 7' : '4 5' ]),
-	    if_($_->{nbuttons} < 3, Emulate3Buttons => undef, Emulate3Timeout => 50),
-	    if_($_->{EMULATEWHEEL}, Emulate3Buttons => undef, Emulate3Timeout => 50, EmulateWheel => undef, EmulateWheelButton => 2),
-	};
-    } @$mouse_;
-
-    if (!$mouse->{auxmouse} && $b_keep_auxmouse_unchanged) {
-	my (undef, @l) = $xfree_conf->get_mice;
-	push @mice, @l;
-    }
-
-    $xfree_conf->set_mice(@mice);
-
-    if (my @wacoms = @{$mouse->{wacom} || []}) {
-	$xfree_conf->set_wacoms(map { { Device => "/dev/$_", USB => m|input/event| } } @wacoms);
-    }
-
-    $synaptics and $xfree_conf->set_synaptics(map { {
-        Device => "/dev/$_->{device}",
-        Protocol => $_->{XMOUSETYPE},
-        Primary => 0,
-        ALPS => $_->{ALPS},
-    } } @$synaptics);
-}
-
-sub various_xfree_conf {
-    my ($do_pkgs, $mouse) = @_;
-
-    {
-	my $f = "$::prefix/etc/X11/xinit.d/mouse_buttons";
-	if ($mouse->{nbuttons} <= 5) {
-	    unlink($f);
-	} else {
-	    output_with_perm($f, 0755, "xmodmap -e 'pointer = 1 2 3 6 7 4 5'\n");
-	}
-    }
-    {
-	my $f = "$::prefix/etc/X11/xinit.d/auxmouse_buttons";
-	if (!$mouse->{auxmouse} || $mouse->{auxmouse}{nbuttons} <= 5) {
-	    unlink($f);
-	} else {
-	    $do_pkgs->install('xinput');
-	    output_with_perm($f, 0755, "xinput set-button-map Mouse2 1 2 3 6 7 4 5\n");
-	}
-    }
-    {
-	my $f = "$::prefix/etc/X11/xinit.d/xpad";
-	if ($mouse->{name} !~ /^Microsoft Xbox Controller/) {
-	    unlink($f);
-	} else {
-	    output_with_perm($f, 0755, "xset m 1/8 1\n");
-	}
-    }
-    
-    if (member(N_("Synaptics Touchpad"), $mouse->{name}, $mouse->{auxmouse} && $mouse->{auxmouse}{name})) {
-	$do_pkgs->install("synaptics");
-    }
-}
-
-#- write_conf : write the mouse infos into the Xconfig files.
-#- input :
-#-  $mouse : the hashtable containing the informations
-#- $mouse input
-#-  $mouse->{nbuttons} : number of buttons : integer
-#-  $mouse->{device} : device of the mouse : string : ex 'psaux'
-#-  $mouse->{XMOUSETYPE} : type of the mouse for gpm : string : ex 'PS/2'
-#-  $mouse->{type} : type (generic ?) of the mouse : string : ex 'PS/2'
-#-  $mouse->{name} : name of the mouse : string : ex 'Standard'
-#-  $mouse->{MOUSETYPE} : type of the mouse : string : ex "ps/2"
-#-  $mouse->{XEMU3} : emulate 3rd button : string : 'yes' or 'no'
-sub write_conf {
-    my ($do_pkgs, $modules_conf, $mouse, $b_keep_auxmouse_unchanged) = @_;
-
-    &write($do_pkgs, $mouse);
-    $modules_conf->write if $mouse->{device} eq "usbmouse" && !$::testing;
-
-    eval {
-	require Xconfig::xfree;
-	my $xfree_conf = Xconfig::xfree->read;
-	set_xfree_conf($mouse, $xfree_conf, $b_keep_auxmouse_unchanged);
-	$xfree_conf->write;
-    };
-}
-
-sub change_mouse_live {
-    my ($mouse, $old) = @_;
-
-    my $xId = xmouse2xId($mouse->{XMOUSETYPE});
-    $old->{device} ne $mouse->{device} || $xId != xmouse2xId($old->{XMOUSETYPE}) or return;
-
-    log::l("telling X server to use another mouse ($mouse->{XMOUSETYPE}, $xId)");
-    eval { modules::load('serial') } if $mouse->{device} =~ /ttyS/;
-
-    if (!$::testing) {
-	devices::make($mouse->{device});
-	symlinkf($mouse->{device}, "/dev/mouse");
-	eval {
-	    require xf86misc::main;
-	    xf86misc::main::setMouseLive($ENV{DISPLAY}, $xId, $mouse->{nbuttons} < 3);
-	};
-    }
-    1;
-}
-
-sub test_mouse_install {
-    my ($mouse, $x_protocol_changed) = @_;
-    require ugtk2;
-    ugtk2->import(qw(:wrappers :create));
-    my $w = ugtk2->new('', disallow_big_help => 1);
-    my $darea = Gtk2::DrawingArea->new;
-    $darea->set_events([ 'button_press_mask', 'button_release_mask' ]);  #$darea must be unrealized.
-    gtkadd($w->{window},
-  	   gtkpack(my $vbox_grab = Gtk2::VBox->new(0, 0),
-		   $darea,
-		   gtkset_sensitive(create_okcancel($w, undef, undef, 'edge'), 1)
-		  ),
-	  );
-    test_mouse($mouse, $darea, $x_protocol_changed);
-    $w->sync; # HACK
-    Gtk2::Gdk->pointer_grab($vbox_grab->window, 1, 'pointer_motion_mask', $vbox_grab->window, undef, 0);
-    my $r = $w->main;
-    Gtk2::Gdk->pointer_ungrab(0);
-    $r;
-}
-
-sub test_mouse_standalone {
-    my ($mouse, $hbox) = @_;
-    require ugtk2;
-    ugtk2->import(qw(:wrappers));
-    my $darea = Gtk2::DrawingArea->new;
-    $darea->set_events([ 'button_press_mask', 'button_release_mask' ]);  #$darea must be unrealized.
-    gtkpack($hbox, gtkpack(gtkset_border_width(Gtk2::VBox->new(0, 10), 10), $darea));
-    test_mouse($mouse, $darea);
-}
-
-sub test_mouse {
-    my ($mouse, $darea, $b_x_protocol_changed) = @_;
-
-    require ugtk2;
-    ugtk2->import(qw(:wrappers));
-    my $suffix = $mouse->{nbuttons} <= 2 ? '2b' : $mouse->{nbuttons} == 3 ? '3b' : '3b+';
-    my %offsets = (mouse_2b_right => [ 93, 0 ], mouse_3b_right => [ 117, 0 ],
-		   mouse_2b_middle => [ 82, 80 ], mouse_3b_middle => [ 68, 0 ], 'mouse_3b+_middle' => [ 85, 67 ]);
-    my %image_files = (
-		       mouse => "mouse_$suffix",
-		       left => 'mouse_' . ($suffix eq '3b+' ? '3b' : $suffix) . '_left',
-		       right => 'mouse_' . ($suffix eq '3b+' ? '3b' : $suffix) . '_right',
-		       if_($mouse->{nbuttons} > 2, middle => 'mouse_' . $suffix . '_middle'),
-		       up => 'arrow_up',
-		       down => 'arrow_down');
-    my %images = map { $_ => ugtk2::gtkcreate_pixbuf("$image_files{$_}.png") } keys %image_files;
-    my $width = $images{mouse}->get_width;
-    my $height = round_up(min($images{mouse}->get_height, $::windowheight - 150), 6);
-
-    my $draw_text = sub {
-  	my ($t, $y) = @_;
-	my $layout = $darea->create_pango_layout($t);
-	my ($w) = $layout->get_pixel_size;
-	$darea->window->draw_layout($darea->style->black_gc,
-				    ($darea->allocation->width-$w)/2,
-				    ($darea->allocation->height-$height)/2 + $y,
-				    $layout);
-    };
-    my $draw_pixbuf = sub {
-	my ($p, $x, $y, $w, $h) = @_;
-	$w = $p->get_width;
-	$h = $p->get_height;
-	$p->render_to_drawable($darea->window, $darea->style->bg_gc('normal'), 0, 0,
-			       ($darea->allocation->width-$width)/2 + $x, ($darea->allocation->height-$height)/2 + $y,
-			       $w, $h, 'none', 0, 0);
-    };
-    my $draw_by_name = sub {
-	my ($name) = @_;
-	my $file = $image_files{$name};
-	my ($x, $y) = @{$offsets{$file} || [ 0, 0 ]};
-	$draw_pixbuf->($images{$name}, $x, $y);
-    };
-    my $drawarea = sub {
-	$draw_by_name->('mouse');
-	if ($::isInstall || 1) {
-	    $draw_text->(N("Please test the mouse"), 200);
-	    if ($b_x_protocol_changed && $mouse->{nbuttons} > 3 && $mouse->{device} eq 'psaux' && member($mouse->{XMOUSETYPE}, 'IMPS/2', 'ExplorerPS/2')) {
-		$draw_text->(N("To activate the mouse,"), 240);
-		$draw_text->(N("MOVE YOUR WHEEL!"), 260);
-	    }
-	}
-    };
-
-    my $timeout;
-    my $paintButton = sub {
-	my ($nb) = @_;
-	$timeout or $drawarea->();
-	if ($nb == 0) {
-	    $draw_by_name->('left');
-	} elsif ($nb == 2) {
-	    $draw_by_name->('right');
-	} elsif ($nb == 1) {
-	    if ($mouse->{nbuttons} >= 3) {
-		$draw_by_name->('middle');
-	    } else {
-		my ($x, $y) = @{$offsets{mouse_2b_middle}};
-  		$darea->window->draw_arc($darea->style->black_gc,
-  					  1, ($darea->allocation->width-$width)/2 + $x, ($darea->allocation->height-$height)/2 + $y, 20, 25,
-  					  0, 360 * 64);
-	    }
-	} elsif ($mouse->{nbuttons} > 3) {
-	    my ($x, $y) = @{$offsets{$image_files{middle}}};
-	    if ($nb == 3) {
-		$draw_pixbuf->($images{up}, $x+6, $y-10);
-	    } elsif ($nb == 4) {
-		$draw_pixbuf->($images{down}, $x+6, $y + $images{middle}->get_height + 2);
-	    }
-	    $draw_by_name->('middle');
-	    $timeout and Glib::Source->remove($timeout);
-	    $timeout = Glib::Timeout->add(100, sub { $drawarea->(); $timeout = 0; 0 });
-	}
-    };
-    
-    $darea->signal_connect(button_press_event => sub { $paintButton->($_[1]->button - 1) });
-    $darea->signal_connect(scroll_event => sub { $paintButton->($_[1]->direction eq 'up' ? 3 : 4) });
-    $darea->signal_connect(button_release_event => $drawarea);
-    $darea->signal_connect(expose_event => $drawarea);
-    $darea->set_size_request($width, $height);
-}
-
-
-=begin
-
-=head1 NAME
-
-mouse - Perl functions to handle mice
-
-=head1 SYNOPSYS
-
-   require modules;
-   require mouse;
-   mouse::detect(modules::any_conf->read);
-
-=head1 DESCRIPTION
-
-C<mouse> is a perl module used by mousedrake to detect and configure the mouse.
-
-=head1 COPYRIGHT
-
-Copyright (C) 2000-2002 Mandriva <tvignaud@mandrakesoft.com>
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-=cut
diff --git a/perl-install/mygtk2.pm b/perl-install/mygtk2.pm
deleted file mode 100644
index 65221d0b2..000000000
--- a/perl-install/mygtk2.pm
+++ /dev/null
@@ -1,910 +0,0 @@
-package mygtk2;
-
-use diagnostics;
-use strict;
-use lang;
-
-our @ISA = qw(Exporter);
-our @EXPORT = qw(gtknew gtkset gtkadd gtkval_register gtkval_modify);
-
-use c;
-use log;
-use common;
-
-use Gtk2;
-use Gtk2::Gdk::Keysyms;
-
-unless ($::no_ugtk_init) {
-    !check_for_xserver() and print("Cannot be run in console mode.\n"), c::_exit(0);
-    $::one_message_has_been_translated and warn("N() was called from $::one_message_has_been_translated BEFORE gtk2 initialisation, replace it with a N_() AND a translate() later.\n"), c::_exit(1);
-
-    Gtk2->init;
-    c::bind_textdomain_codeset($_, 'UTF8') foreach 'libDrakX', @::textdomains;
-    $::need_utf8_i18n = 1;
-}
-Gtk2->croak_execeptions if (!$::no_ugtk_init || $::isInstall) && 0.95 < $Gtk2::VERSION;
-
-
-
-sub gtknew {
-    my $class = shift;
-    if (@_ % 2 != 0) {
-	internal_error("gtknew $class: bad options @_");
-    }
-    if (my $r = find { ref $_->[0] } group_by2(@_)) {
-	internal_error("gtknew $class: $r should be a string in @_");
-    }
-    my %opts = @_;
-    _gtk(undef, $class, 'gtknew', \%opts);
-}
-
-sub gtkset {
-    my $w = shift;
-    my $class = ref($w);
-    if (@_ % 2 != 0) {
-	internal_error("gtkset $class: bad options @_");
-    }
-    if (my $r = find { ref $_->[0] } group_by2(@_)) {
-	internal_error("gtkset $class: $r should be a string in @_");
-    }
-    my %opts = @_;
-
-    $class =~ s/^(Gtk2|Gtk2::Gdk|mygtk2)::// or internal_error("gtkset unknown class $class");
-    
-    _gtk($w, $class, 'gtkset', \%opts);
-}
-
-sub gtkadd {
-    my $w = shift;
-    my $class = ref($w);
-    if (@_ % 2 != 0) {
-	internal_error("gtkadd $class: bad options @_");
-    }
-    if (my $r = find { ref $_->[0] } group_by2(@_)) {
-	internal_error("gtkadd $class: $r should be a string in @_");
-    }
-    my %opts = @_;
-    $class =~ s/^(Gtk2|Gtk2::Gdk|mygtk2)::// or internal_error("gtkadd unknown class $class");
-    
-    _gtk($w, $class, 'gtkadd', \%opts);
-}
-
-
-my %refs;
-
-sub gtkval_register {
-    my ($w, $ref, $sub) = @_;
-    push @{$w->{_ref}}, $ref;
-    $w->signal_connect(destroy => sub { 
-	@{$refs{$ref}} = grep { $_->[1] != $w } @{$refs{$ref}};
-	delete $refs{$ref} if !@{$refs{$ref}};
-    });
-    push @{$refs{$ref}}, [ $sub, $w ];
-}
-sub gtkval_modify {
-    my ($ref, $val, @to_skip) = @_;
-    my $prev = '' . $ref;
-    $$ref = $val;
-    if ($prev ne '' . $ref) {
-	internal_error();
-    }
-    foreach (@{$refs{$ref} || []}) {	
-	my ($f, @para) = @$_;
-	$f->(@para) if !member($f, @to_skip);
-    }
-}
-
-my $global_tooltips;
-
-sub _gtk {
-    my ($w, $class, $action, $opts) = @_;
-
-    if (my $f = $mygtk2::{"_gtk__$class"}) {
-	$w = $f->($w, $opts, $class, $action);
-    } else {
-	internal_error("$action $class: unknown class");
-    }
-
-    $w->set_size_request(delete $opts->{width} || -1, delete $opts->{height} || -1) if exists $opts->{width} || exists $opts->{height};
-    if (my $position = delete $opts->{position}) {
-	$w->move($position->[0], $position->[1]);
-    }
-    $w->set_name(delete $opts->{widget_name}) if exists $opts->{widget_name};
-    $w->can_focus(delete $opts->{can_focus}) if exists $opts->{can_focus};
-    $w->can_default(delete $opts->{can_default}) if exists $opts->{can_default};
-    $w->grab_focus if delete $opts->{grab_focus};
-    (delete $opts->{size_group})->add_widget($w) if $opts->{size_group};
-    if (my $tip = delete $opts->{tip}) {
-	$global_tooltips ||= Gtk2::Tooltips->new;
-	$global_tooltips->set_tip($w, $tip);
-    }
-
-    if (%$opts && !$opts->{allow_unknown_options}) {
-	internal_error("$action $class: unknown option(s) " . join(', ', keys %$opts));
-    }
-    $w;
-}
-
-
-sub _gtk__Button       { &_gtk_any_Button }
-sub _gtk__ToggleButton { &_gtk_any_Button }
-sub _gtk__CheckButton  { &_gtk_any_Button }
-sub _gtk_any_Button {
-    my ($w, $opts, $class) = @_;
-
-    if (!$w) {
-	if (!$opts->{image}) {
-	    add2hash_($opts, { mnemonic => 1 });
-	}
-	$w = $opts->{image} ? "Gtk2::$class"->new :
-	  delete $opts->{mnemonic} ? "Gtk2::$class"->new_with_mnemonic(delete $opts->{text} || '') :
-	    "Gtk2::$class"->new_with_label(delete $opts->{text} || '');
-
-	$w->{format} = delete $opts->{format} if exists $opts->{format};
-    }
-
-    if (my $image = delete $opts->{image}) {
-	$w->add($image);
-	$image->show;
-    }
-    $w->set_sensitive(delete $opts->{sensitive}) if exists $opts->{sensitive};
-    $w->set_relief(delete $opts->{relief}) if exists $opts->{relief};
-
-    if (my $text_ref = delete $opts->{text_ref}) {
-	my $set = sub {
-	    eval { $w->set_label(may_apply($w->{format}, $$text_ref)) };
-	};
-	gtkval_register($w, $text_ref, $set);
-	$set->();
-    } elsif (exists $opts->{text}) {
-	$w->set_label(delete $opts->{text});
-    }
-
-    if ($class eq 'Button') {
-	$w->signal_connect(clicked => delete $opts->{clicked}) if exists $opts->{clicked};
-    } else {
-	if (my $active_ref = delete $opts->{active_ref}) {
-	    my $set = sub { $w->set_active($$active_ref) };
-	    $w->signal_connect(toggled => sub {
-		gtkval_modify($active_ref, $w->get_active, $set);
-	    });
-	    gtkval_register($w, $active_ref, $set);
-	    gtkval_register($w, $active_ref, delete $opts->{toggled}) if exists $opts->{toggled};
-	    $set->();
-	} else {
-	    $w->set_active(delete $opts->{active}) if exists $opts->{active};
-	    $w->signal_connect(toggled => delete $opts->{toggled}) if exists $opts->{toggled};
-	}
-    }
-    $w;
-}
-
-sub _gtk__CheckMenuItem {
-    my ($w, $opts, $class) = @_;
-
-    if (!$w) {
-	add2hash_($opts, { mnemonic => 1 });
-
-	$w = $opts->{image} || !exists $opts->{text} ? "Gtk2::$class"->new :
-	  delete $opts->{mnemonic} ? "Gtk2::$class"->new_with_label(delete $opts->{text}) :
-	    "Gtk2::$class"->new_with_mnemonic(delete $opts->{text});
-    }
-
-    $w->set_active(delete $opts->{active}) if exists $opts->{active};
-    $w->signal_connect(toggled => delete $opts->{toggled}) if exists $opts->{toggled};
-    $w;
-}
-
-sub _gtk___SpinButton {
-    my ($w, $opts) = @_;
-
-    if (!$w) {
-	$opts->{adjustment} ||= do {
-	    add2hash_($opts, { step_increment => 1, page_increment => 5, page_size => 1, value => delete $opts->{lower} });
-	    Gtk2::Adjustment->new(delete $opts->{value}, delete $opts->{lower}, delete $opts->{upper}, delete $opts->{step_increment}, delete $opts->{page_increment}, delete $opts->{page_size});
-	};
-	$w = Gtk2::SpinButton->new(delete $opts->{adjustment}, delete $opts->{climb_rate} || 0, delete $opts->{digits} || 0);
-    }
-
-    $w->signal_connect(value_changed => delete $opts->{value_changed}) if exists $opts->{value_changed};
-    $w;
-}
-
-sub _gtk__HScale {
-    my ($w, $opts) = @_;
-
-    if (!$w) {
-	$opts->{adjustment} ||= do {
-	    add2hash_($opts, { step_increment => 1, page_increment => 5, page_size => 1, value => delete $opts->{lower} });
-	    Gtk2::Adjustment->new(delete $opts->{value}, delete $opts->{lower}, (delete $opts->{upper}) + 1, delete $opts->{step_increment}, delete $opts->{page_increment}, delete $opts->{page_size});
-	};
-	$w = Gtk2::HScale->new(delete $opts->{adjustment});
-    }
-
-    $w->signal_connect(value_changed => delete $opts->{value_changed}) if exists $opts->{value_changed};
-    $w;
-}
-
-sub _gtk__VSeparator { &_gtk_any_simple }
-sub _gtk__HSeparator { &_gtk_any_simple }
-sub _gtk__Calendar   { &_gtk_any_simple }
-
-sub _gtk__DrawingArea {
-    my ($w, $opts) = @_;
-
-    if (!$w) {
-	$w = Gtk2::DrawingArea->new;
-    }
-    $w->signal_connect(expose_event => delete $opts->{expose_event}) if exists $opts->{expose_event};
-    $w;
-}
-
-sub _gtk__Pixbuf {
-    my ($w, $opts) = @_;
-
-    if (!$w) {
-	my $name = delete $opts->{file} or internal_error("missing file");
-	my $file = _find_imgfile($name) or internal_error("can not find $name");
-	$w = Gtk2::Gdk::Pixbuf->new_from_file($file);
-    }
-    $w;
-}
-
-sub _gtk__Image {
-    my ($w, $opts, $class) = @_;
-
-    if (!$w) {
-	$w = "Gtk2::$class"->new;
-	$w->{format} = delete $opts->{format} if exists $opts->{format};
-    }
-
-    if (my $name = delete $opts->{file}) {
-	my $file = _find_imgfile(may_apply($w->{format}, $name)) or internal_error("can not find $name");
-	$w->set_from_file($file);
-    } elsif (my $file_ref = delete $opts->{file_ref}) {
-	my $set = sub {
-	    my $file = _find_imgfile(may_apply($w->{format}, $$file_ref)) or internal_error("can not find $$file_ref");
-	    $w->set_from_file($file);
-	};
-	gtkval_register($w, $file_ref, $set);
-	$set->();
-    }
-    $w;
-}
-
-sub _gtk__WrappedLabel {
-    my ($w, $opts) = @_;
-    
-    $opts->{line_wrap} = 1;
-    _gtk__Label($w, $opts);
-}
-
-sub _gtk__Label {
-    my ($w, $opts) = @_;
-
-    if ($w) {
-	$w->set_text(delete $opts->{text}) if exists $opts->{text};
-    } else {
-	$w = exists $opts->{text} ? Gtk2::Label->new(delete $opts->{text}) : Gtk2::Label->new;
-	$w->set_justify(delete $opts->{justify}) if exists $opts->{justify};
-	$w->set_line_wrap(delete $opts->{line_wrap}) if exists $opts->{line_wrap};
-	$w->set_alignment(@{delete $opts->{alignment}}) if exists $opts->{alignment};
-	$w->modify_font(Gtk2::Pango::FontDescription->from_string(delete $opts->{font})) if exists $opts->{font};
-    }
-
-    $w->set_markup(delete $opts->{text_markup}) if exists $opts->{text_markup};
-    $w;
-}
-
-sub _gtk__Entry {
-    my ($w, $opts) = @_;
-
-    if (!$w) {
-	$w = Gtk2::Entry->new;
-	$w->set_editable(delete $opts->{editable}) if exists $opts->{editable};
-    }
-
-    $w->set_text(delete $opts->{text}) if exists $opts->{text};
-    $w->signal_connect(key_press_event => delete $opts->{key_press_event}) if exists $opts->{key_press_event};
-    $w;
-}
-
-sub _gtk__TextView {
-    my ($w, $opts) = @_;
-	
-    if (!$w) {
-	$w = Gtk2::TextView->new;
-	$w->set_editable(delete $opts->{editable}) if exists $opts->{editable};
-	$w->set_wrap_mode(delete $opts->{wrap_mode}) if exists $opts->{wrap_mode};
-	$w->set_cursor_visible(delete $opts->{cursor_visible}) if exists $opts->{cursor_visible};
-    }
-
-    _text_insert($w, delete $opts->{text}) if exists $opts->{text};
-    $w;
-}
-
-sub _gtk__ComboBox {
-    my ($w, $opts, $_class, $action) = @_;
-
-    if (!$w) {
-	$w = Gtk2::ComboBox->new_text;
-	$w->{format} = delete $opts->{format} if exists $opts->{format};
-
-    }
-    my $set_list = sub {
-	$w->{formatted_list} = $w->{format} ? [ map { $w->{format}($_) } @{$w->{list}} ] : $w->{list};
-	$w->get_model->clear;
-	$w->append_text($_) foreach @{$w->{formatted_list}};
-    };
-    if (my $list_ref = delete $opts->{list_ref}) {
-	!$opts->{list} or internal_error("both list and list_ref");
-	my $set = sub {
-	    $w->{list} = $$list_ref;
-	    $set_list->();
-	};
-	gtkval_register($w, $list_ref, $set);
-	$set->();
-    } elsif (exists $opts->{list}) {
-	$w->{list} = delete $opts->{list};
-	$set_list->();
-    }
-
-    if ($action eq 'gtknew') {
-	if (my $text_ref = delete $opts->{text_ref}) {
-	    my $set = sub {
-		my $val = may_apply($w->{format}, $$text_ref);
-		eval { $w->set_active(find_index { $_ eq $val } @{$w->{formatted_list}}) };
-	    };
-	    $w->signal_connect(changed => sub {
-		gtkval_modify($text_ref, $w->{list}[$w->get_active], $set);
-	    });
-	    gtkval_register($w, $text_ref, $set);
-	    gtkval_register($w, $text_ref, delete $opts->{changed}) if exists $opts->{changed};
-	    $set->();
-	} else {
-	    my $val = delete $opts->{text};
-	    eval { $w->set_active(find_index { $_ eq $val } @{$w->{formatted_list}}) } if defined $val;
-	    $w->signal_connect(changed => delete $opts->{changed}) if exists $opts->{changed};
-	}
-    }
-    $w;
-}
-
-sub _gtk__ScrolledWindow {
-    my ($w, $opts, $_class, $action) = @_;
-	
-    if (!$w) {
-	$w = Gtk2::ScrolledWindow->new(undef, undef);
-	$w->set_policy(delete $opts->{h_policy} || 'automatic', delete $opts->{v_policy} || 'automatic');
-    }
-
-    if (my $child = delete $opts->{child}) {
-	if (member(ref($child), qw(Gtk2::Layout Gtk2::Text Gtk2::TextView Gtk2::TreeView))) {
-	    $w->add($child);
-	} else {
-	    $w->add_with_viewport($child);
-	}
-	$child->set_focus_vadjustment($w->get_vadjustment) if $child->can('set_focus_vadjustment');
-	$child->set_left_margin(6) if ref($child) =~ /Gtk2::TextView/;
-	$child->show;
-
-	$w->child->set_shadow_type(delete $opts->{shadow_type}) if exists $opts->{shadow_type};
-
-	if ($action eq 'gtknew' && ref($child) =~ /Gtk2::TextView|Gtk2::TreeView/) {
-	    $w = gtknew('Frame', shadow_type => 'in', child => $w);
-	}
-    }
-    $w;
-}
-
-sub _gtk__Frame {
-    my ($w, $opts) = @_;
-
-    if ($w) {
-	$w->set_label(delete $opts->{text}) if exists $opts->{text};
-    } else {
-	$w = Gtk2::Frame->new(delete $opts->{text});
-	$w->set_border_width(delete $opts->{border_width}) if exists $opts->{border_width};
-	$w->set_shadow_type(delete $opts->{shadow_type}) if exists $opts->{shadow_type};
-    }
-
-    if (my $child = delete $opts->{child}) {
-	$w->add($child);
-	$child->show;
-    }
-    $w;
-}
-
-sub _gtk__Window { &_gtk_any_Window }
-sub _gtk__Dialog { &_gtk_any_Window }
-sub _gtk__Plug   { &_gtk_any_Window }
-sub _gtk_any_Window {
-    my ($w, $opts, $class) = @_;
-
-    if (!$w) {
-	if ($class eq 'Window') {
-	    $w = "Gtk2::$class"->new(delete $opts->{type} || 'toplevel');
-	} elsif ($class eq 'Plug') {
-	    $opts->{socket_id} or internal_error("can not create a Plug without a socket_id");
-	    $w = "Gtk2::$class"->new(delete $opts->{socket_id});
-	} else {
-	    $w = "Gtk2::$class"->new;
-	}
-
-	$w->set_modal(delete $opts->{modal}) if exists $opts->{modal};
-	$w->set_transient_for(delete $opts->{transient_for}) if exists $opts->{transient_for};
-	$w->set_border_width(delete $opts->{border_width}) if exists $opts->{border_width};
-	$w->set_shadow_type(delete $opts->{shadow_type}) if exists $opts->{shadow_type};
-	$w->set_position(delete $opts->{position_policy}) if exists $opts->{position_policy};
-	my $icon_no_error = $opts->{icon_no_error};
-	if (my $name = delete $opts->{icon} || delete $opts->{icon_no_error}) {
-	    if (my $f = _find_imgfile($name)) {
-		$w->set_icon(gtknew('Pixbuf', file => $f));
-	    } elsif (!$icon_no_error) {
-		internal_error("can not find $name");
-	    }
-	}
-    }
-    $w->set_title(delete $opts->{title}) if exists $opts->{title};
-
-    if (my $child = delete $opts->{child}) {
-	$w->add($child);
-	$child->show;
-    }
-    $w;
-}
-
-sub _gtk__MagicWindow {
-    my ($w, $opts) = @_;
-
-    my $pop_it = delete $opts->{pop_it} || !$::isWizard && !$::isEmbedded || $::WizardTable && do {
-	#- do not take into account the wizard banner
-	any { !$_->isa('Gtk2::DrawingArea') && $_->visible } $::WizardTable->get_children;
-    };
-
-    my $sub_child = delete $opts->{child} or internal_error("missing child");
-
-    if ($pop_it) {
-	$opts->{child} = $::isInstall ?
-	  gtknew('Frame', shadow_type => 'out', 
-		 child => gtknew('Frame', shadow_type => 'none', border_width => 3, child => $sub_child)) :
-	  $sub_child;
-
-	$w = _create_Window($opts);
-    } else {
-	if (!$::WizardWindow) {
-
-	    my $banner;
-	    if (!$::isEmbedded && !$::isInstall && $::Wizard_title) {
-		$banner = Gtk2::Banner->new($opts->{icon_no_error}, $::Wizard_title) or log::l("ERROR: missing wizard banner");
-	    }
-	    $::WizardTable = gtknew('VBox', if_($banner, children_tight => [ $banner ]));
-
-	    if ($::isEmbedded) {
-		add2hash($opts, {
-		    socket_id => $::XID,
-		    child => $::WizardTable,
-		});
-		$::Plug = $::WizardWindow = _gtk(undef, 'Plug', 'gtknew', $opts);
-		sync($::WizardWindow);
-	    } else {
-		add2hash($opts, {
-		    child => gtknew('Frame', shadow_type => 'out', child => $::WizardTable),
-		});
-		$::WizardWindow = _create_Window($opts);
-	    }
-	} else {
-	    %$opts = ();
-	}
-
-	set_main_window_size($::WizardWindow);
-	$sub_child->set_border_width(10);
-
-	$w = $::WizardWindow;
-	gtkadd($::WizardTable, children_loose => [ $sub_child ]);
-    }
-    bless { real_window => $w, child => $sub_child, pop_it => $pop_it }, 'mygtk2::MagicWindow';
-}
-
-sub _gtk__FileSelection {
-    my ($w, $opts) = @_;
-
-    if (!$w) {
-	$w = Gtk2::FileSelection->new(delete $opts->{title} || '');
-	gtkset($w->ok_button, %{delete $opts->{ok_button}}) if exists $opts->{ok_button};
-	gtkset($w->cancel_button, %{delete $opts->{cancel_button}}) if exists $opts->{cancel_button};
-    }
-    $w;
-}
-
-sub _gtk__FileChooser {
-    my ($w, $opts) = @_;
-
-    #- no nice way to have a {file_ref} on a FileChooser since selection_changed only works for browsing, not file/folder creation
-
-    if (!$w) {
-	my $action = delete $opts->{action} || internal_error("missing action for FileChooser");
-	$w = Gtk2::FileChooserWidget->new($action);
-
-	my $file = $opts->{file} && delete $opts->{file};
-
-	if (my $dir = delete $opts->{directory} || $file && dirname($file)) {
-	    $w->set_current_folder($dir);
-	}
-	if ($file) {
-	    my $meth = $action =~ /save|create/ ? 'set_current_name' : 'set_filename';
-	    $w->$meth($file);
-	}
-    }
-    $w;
-}
-
-sub _gtk__VBox { &_gtk_any_Box }
-sub _gtk__HBox { &_gtk_any_Box }
-sub _gtk_any_Box {
-    my ($w, $opts, $class, $action) = @_;
-
-    if (!$w) {
-	$w = "Gtk2::$class"->new(0,0);
-	$w->set_homogeneous(delete $opts->{homogenous}) if exists $opts->{homogenous};
-	$w->set_spacing(delete $opts->{spacing}) if exists $opts->{spacing};
-	$w->set_border_width(delete $opts->{border_width}) if exists $opts->{border_width};
-    } elsif ($action eq 'gtkset') {
-	$_->destroy foreach $w->get_children;
-    }
-
-    _gtknew_handle_children($w, $opts);
-    $w;
-}
-
-sub _gtk__VButtonBox { &_gtk_any_ButtonBox }
-sub _gtk__HButtonBox { &_gtk_any_ButtonBox }
-sub _gtk_any_ButtonBox {
-    my ($w, $opts, $class, $action) = @_;
-
-    if (!$w) {
-	$w = "Gtk2::$class"->new;
-	$w->set_layout(delete $opts->{layout} || 'spread');
-    } elsif ($action eq 'gtkset') {
-	$_->destroy foreach $w->get_children;
-    }
-
-    _gtknew_handle_children($w, $opts);
-    $w;
-}
-
-sub _gtk__Notebook {
-    my ($w, $opts) = @_;
-
-    if (!$w) {
-	$w = Gtk2::Notebook->new;
-	$w->set_property('show-tabs', delete $opts->{show_tabs}) if exists $opts->{show_tabs};
-	$w->set_property('show-border', delete $opts->{show_border}) if exists $opts->{show_border};
-    }
-
-    if (exists $opts->{children}) {
-	foreach (group_by2(@{delete $opts->{children}})) {
-	    my ($title, $page) = @$_;
-	    $w->append_page($page, $title);
-	    $page->show;
-	    $title->show;
-	}
-    }
-    $w;
-}
-
-sub _gtk__Table {
-    my ($w, $opts) = @_;
-
-    if (!$w) {
-	add2hash_($opts, { xpadding => 5, ypadding => 0, border_width => $::isInstall ? 3 : 10 });
-
-	$w = Gtk2::Table->new(0, 0, delete $opts->{homogeneous} || 0);
-	$w->set_col_spacings(delete $opts->{col_spacings} || 0);
-	$w->set_row_spacings(delete $opts->{row_spacings} || 0);
-	$w->set_border_width(delete $opts->{border_width});
-	$w->{$_} = delete $opts->{$_} foreach 'xpadding', 'ypadding', 'mcc';
-    }
-
-    each_index {
-	my ($i, $l) = ($::i, $_);
-	each_index {
-	    my $j = $::i;
-	    if ($_) {
-		ref $_ or $_ = Gtk2::WrappedLabel->new($_);
-		$j != $#$l && !$w->{mcc} ?
-		  $w->attach($_, $j, $j + 1, $i, $i + 1,
-			     'fill', 'fill', $w->{xpadding}, $w->{ypadding}) :
-			       $w->attach($_, $j, $j + 1, $i, $i + 1,
-					  ['expand', 'fill'], ref($_) eq 'Gtk2::ScrolledWindow' || $_->get_data('must_grow') ? ['expand', 'fill'] : [], 0, 0);
-		$_->show;
-	    }
-	} @$l;
-    } @{delete $opts->{children} || []};
-
-    $w;
-}
-
-sub _gtk_any_simple {
-    my ($w, $_opts, $class) = @_;
-
-    $w ||= "Gtk2::$class"->new;
-}
-
-sub _gtknew_handle_children {
-    my ($w, $opts) = @_;
-
-    my @child = exists $opts->{children_tight} ? map { [ 0, $_ ] } @{delete $opts->{children_tight}} :
-                exists $opts->{children_loose} ? map { [ 1, $_ ] } @{delete $opts->{children_loose}} :
-	        exists $opts->{children} ? group_by2(@{delete $opts->{children}}) : ();
-
-    my $padding = delete $opts->{padding};
-
-    foreach (@child) {
-	my ($fill, $child) = @$_;
-	$fill eq '0' || $fill eq '1' or internal_error("odd {children} parameter must be 0 or 1 (got $fill)");
-	ref $child or $child = Gtk2::WrappedLabel->new($child);
-	$w->pack_start($child, $fill, $fill, $padding || 0);
-	$child->show;
-    }
-}
-
-#- this magic function redirects method calls:
-#- * default is to redirect them to the {child}
-#- * if the {child} doesn't handle the method, we try with the {real_window}
-#-   (eg : add_accel_group set_position set_default_size
-#- * a few methods are handled specially
-my %for_real_window = map { $_ => 1 } qw(show_all size_request);
-sub mygtk2::MagicWindow::AUTOLOAD {
-    my ($w, @args) = @_;
-
-    my ($meth) = $mygtk2::MagicWindow::AUTOLOAD =~ /mygtk2::MagicWindow::(.*)/;
-
-    my ($s1, $s2) = $meth eq 'show'
-              ? ('real_window', 'child') :
-            $meth eq 'get' && $args[0] eq 'window-position' ||
-            $w->{pop_it} && ($meth eq 'destroy' || $meth eq 'hide') ||
-	    $for_real_window{$meth} ||
-            !$w->{child}->can($meth)
-	      ? 'real_window'
-	      : 'child';
-
-#-    warn "mygtk2::MagicWindow::$meth", first($w =~ /HASH(.*)/), " on $s1 (@args)\n";
-
-    $w->{$s2}->$meth(@args) if $s2;
-    $w->{$s1}->$meth(@args);
-}
-
-sub _create_Window {
-    my ($opts) = @_;
-
-    my $no_Window_Manager = !$::isStandalone;
-
-    add2hash($opts, {
-	if_(!$::isInstall && !$::isWizard, border_width => 5),
-
-	#- policy: during install, we need a special code to handle the weird centering, see below
-	position_policy => $::isInstall ? 'none' : $no_Window_Manager ? 'center-always' : 'center-on-parent',
-
-	if_($::isInstall, position => [
-	    $::rootwidth - ($::windowwidth + $::real_windowwidth) / 2, 
-	    $::logoheight + ($::windowheight - $::real_windowheight) / 2,
-	]),
-    });
-    my $w = _gtk(undef, 'Window', 'gtknew', $opts);
-
-    #- when the window is closed using the window manager "X" button (or alt-f4)
-    $w->signal_connect(delete_event => sub { 
-	if ($::isWizard) {
-	    $w->destroy; 
-	    die 'wizcancel';
-	} else { 
-	    Gtk2->main_quit;
-	} 
-    });
-
-    if ($no_Window_Manager) {
-	_force_keyboard_focus($w);
-    }
-
-    if ($::isInstall) {
-	require install_gtk; #- for perl_checker
-	install_gtk::handle_unsafe_mouse($::o, $w);
-	$w->signal_connect(key_press_event => \&install_gtk::special_shortcuts);
-
-	#- force center at a weird position, this can't be handled by position_policy
-	#- because center-on-parent is a window manager hint, and we don't have a WM
-	my ($wi, $he);
-	$w->signal_connect(size_allocate => sub {
-	    my (undef, $event) = @_;
-	    my @w_size = $event->values;
-	    return if $w_size[2] == $wi && $w_size[3] == $he; #BUG
-	    (undef, undef, $wi, $he) = @w_size;
-
-            $w->move(max(0, $::rootwidth - ($::windowwidth + $wi) / 2), 
-		     max(0, $::logoheight + ($::windowheight - $he) / 2));
-	});
-	#- without this, the focus is broken during install, though this is not needed during X test, why??
-	$w->show;
-    }
-
-    $w;
-}
-
-my $current_window;
-sub _force_keyboard_focus {
-    my ($w) = @_;
-
-    sub _XSetInputFocus {
-	my ($w) = @_;
-	if ($current_window == $w) {
-	    $w->window->XSetInputFocus;
-	} else {
-	    log::l("not XSetInputFocus since already done and not on top");
-	}
-	0;
-    }
-
-    #- force keyboard focus instead of mouse focus
-    my $previous_current_window = $current_window;
-    $current_window = $w;
-    $w->signal_connect(expose_event => \&_XSetInputFocus);
-    $w->signal_connect(destroy => sub { $current_window = $previous_current_window });
-}
-
-sub _find_imgfile {
-    my ($name) = @_;
-
-    if ($name =~ m|/| && -f $name) {
-	$name;
-    } else {
-	foreach my $path (_icon_paths()) {
-	    foreach ('', '.png', '.xpm') {
-		my $file = "$path/$name$_";
-		-f $file and return $file;
-	    }
-	}
-    }
-}
-
-# _text_insert() can be used with any of choose one of theses styles:
-# - no tags:
-#   _text_insert($textview, "My text..");
-# - anonymous tags:
-#   _text_insert($textview, [ [ 'first text',  { 'foreground' => 'blue', 'background' => 'green', ... } ],
-#			        [ 'second text' ],
-#		                [ 'third', { 'font' => 'Serif 15', ... } ],
-#                               ... ]);
-# - named tags:
-#   $textview->{tags} = {
-#                        'blue_green' => { 'foreground' => 'blue', 'background' => 'green', ... },
-#                        'big_font' => { 'font' => 'Serif 35', ... },
-#                       }
-#   _text_insert($textview, [ [ 'first text',  'blue_green' ],
-#		                [ 'second', 'big_font' ],
-#                               ... ]);
-# - mixed anonymous and named tags:
-#   $textview->{tags} = {
-#                        'blue_green' => { 'foreground' => 'blue', 'background' => 'green', ... },
-#                        'big_font' => { 'font' => 'Serif 35', ... },
-#                       }
-#   _text_insert($textview, [ [ 'first text',  'blue_green' ],
-#			        [ 'second text' ],
-#		                [ 'third', 'big_font' ],
-#		                [ 'fourth', { 'font' => 'Serif 15', ... } ],
-#                               ... ]);
-sub _text_insert {
-    my ($textview, $t, %opts) = @_;
-    my $buffer = $textview->get_buffer;
-    $buffer->{tags} ||= {};
-    $buffer->{gtk_tags} ||= {};
-    my $gtk_tags = $buffer->{gtk_tags};
-    my $tags = $buffer->{tags};
-    if (ref($t) eq 'ARRAY') {
-        $opts{append} or $buffer->set_text('');
-        foreach my $token (@$t) {
-            my ($item, $tag) = @$token;
-            my $iter1 = $buffer->get_end_iter;
-            if ($item =~ /^Gtk2::Gdk::Pixbuf/) {
-                $buffer->insert_pixbuf($iter1, $item);
-                next;
-            }
-            if ($tag) {
-                if (ref($tag)) {
-                    # use anonymous tags
-                    $buffer->insert_with_tags($iter1, $item, $buffer->create_tag(undef, %$tag));
-                } else {
-                    # fast text insertion:
-                    # since in some contexts (eg: localedrake, rpmdrake), we use quite a lot of identical tags,
-                    # it's much more efficient and less memory pressure to use named tags
-                    $gtk_tags->{$tag} ||= $buffer->create_tag($tag, %{$tags->{$token->[1]}});
-                    $buffer->insert_with_tags($iter1, $item, $gtk_tags->{$tag});
-                }
-            } else {
-                $buffer->insert($iter1, $item);
-            }
-        }
-    } else {
-        if ($opts{append}) {
-            $buffer->insert($buffer->get_end_iter, $t);
-        } else {
-            $buffer->set_text($t);
-        }
-    }
-    #- the following line is needed to move the cursor to the beginning, so that if the
-    #- textview has a scrollbar, it will not scroll to the bottom when focusing (#3633)
-    $buffer->place_cursor($buffer->get_start_iter);
-    $textview->set_wrap_mode($opts{wrap_mode} || 'word');
-    $textview->set_editable($opts{editable} || 0);
-    $textview->set_cursor_visible($opts{visible} || 0);
-    $textview;
-}
-
-sub set_main_window_size {
-    my ($window) = @_;
-    my ($width, $height) = $::isInstall ? ($::real_windowwidth, $::real_windowheight) : $::isWizard ? (540, 360) : (600, 400);
-    $window->set_size_request($width, $height);
-}
-
-my @icon_paths;
-sub add_icon_path { push @icon_paths, @_ }
-sub _icon_paths() {
-   (@icon_paths, (exists $ENV{SHARE_PATH} ? ($ENV{SHARE_PATH}, "$ENV{SHARE_PATH}/icons", "$ENV{SHARE_PATH}/libDrakX/pixmaps") : ()),
-    "/usr/lib/libDrakX/icons", "pixmaps", 'standalone/icons', '/usr/share/rpmdrake/icons');
-}  
-
-sub main {
-    my ($window, $o_verif) = @_;
-    my $destroyed;
-    $window->signal_connect(destroy => sub { $destroyed = 1 });
-    $window->show;
-    do { Gtk2->main } while (!$destroyed && $o_verif && !$o_verif->());
-    may_destroy($window);
-    flush();
-}
-
-sub sync {
-    my ($window) = @_;
-    $window->show;
-    flush();
-}
-
-sub flush() { 
-    Gtk2->main_iteration while Gtk2->events_pending;
-}
-
-sub may_destroy {
-    my ($w) = @_;
-    $w->destroy if $w;
-}
-
-sub root_window() {
-    my $root if 0;
-    $root ||= Gtk2::Gdk->get_default_root_window;
-}
-
-sub rgb2color {
-    my ($r, $g, $b) = @_;
-    my $color = Gtk2::Gdk::Color->new($r, $g, $b);
-    root_window()->get_colormap->rgb_find_color($color);
-    $color;
-}
-
-sub set_root_window_background {
-    my ($r, $g, $b) = @_;
-    my $root = root_window();
-    my $gc = Gtk2::Gdk::GC->new($root);
-    my $color = rgb2color($r, $g, $b);
-    $gc->set_rgb_fg_color($color);
-    set_root_window_background_with_gc($gc);
-}
-
-sub set_root_window_background_with_gc {
-    my ($gc) = @_;
-    my $root = root_window();
-    my ($w, $h) = $root->get_size;
-    $root->set_background($gc->get_values->{foreground});
-    $root->draw_rectangle($gc, 1, 0, 0, $w, $h);
-}
-
-1;
diff --git a/perl-install/network/activefw.pm b/perl-install/network/activefw.pm
deleted file mode 100644
index 5ddd696d2..000000000
--- a/perl-install/network/activefw.pm
+++ /dev/null
@@ -1,151 +0,0 @@
-package activefw;
-
-use Net::DBus;
-use Net::DBus::Binding::Watch;
-use Gtk2::Helper;
-use POSIX qw(strftime);
-use Socket;
-
-sub new {
-    my ($type, $filter) = @_;
-
-    my $bus = Net::DBus->system;
-    my $con = $bus->{connection};
-
-    $con->add_filter($filter);
-    $con->add_match("type='signal',interface='com.mandrakesoft.activefirewall'");
-
-    set_DBus_watch($con);
-    $con->dispatch;
-
-    my $o = bless {
-        bus => $bus,
-        daemon => $daemon
-    }, $type;
-
-    $o->find_daemon;
-
-    $o;
-}
-
-sub find_daemon {
-    my ($o) = @_;
-    my $service = $o->{bus}->get_service("com.mandrakesoft.activefirewall.daemon");
-    $o->{daemon} = $service->get_object("/com/mandrakesoft/activefirewall", "com.mandrakesoft.activefirewall.daemon");
-}
-
-sub set_DBus_watch {
-    my ($con) = @_;
-    $con->set_watch_callbacks(sub {
-        my ($con, $watch) = @_;
-        my $flags = $watch->get_flags;
-        if ($flags & &Net::DBus::Binding::Watch::READABLE) {
-            Gtk2::Helper->add_watch($watch->get_fileno, 'in', sub {
-                $watch->handle(&Net::DBus::Binding::Watch::READABLE);
-                $con->dispatch;
-                1;
-            });
-        }
-        #- do nothing for WRITABLE watch, we dispatch when needed
-    }, undef, undef); #- do nothing when watch is disabled or toggled yet
-}
-
-sub dispatch {
-    my ($o) = @_;
-    $o->{bus}{connection}->dispatch;
-}
-
-sub call_method {
-    my ($o, $method, @args) = @_;
-    my @ret;
-    eval {
-        @ret = $o->{daemon}->$method(@args);
-    };
-    if ($@) {
-        print "($method) exception: $@\n";
-        $o->dispatch;
-        return;
-    }
-    @ret;
-}
-
-sub blacklist {
-    my ($o, $seq, $blacklist) = @_;
-    $o->call_method('Blacklist',
-                    Net::DBus::Binding::Value->new(&Net::DBus::Binding::Message::TYPE_UINT32, $seq),
-                    Net::DBus::Binding::Value->new(&Net::DBus::Binding::Message::TYPE_UINT32, $blacklist));
-}
-
-sub unblacklist {
-    my ($o, $addr) = @_;
-    $o->call_method('UnBlacklist',
-                    Net::DBus::Binding::Value->new(&Net::DBus::Binding::Message::TYPE_UINT32, $addr));
-}
-
-sub whitelist {
-    my ($o, $addr) = @_;
-    $o->call_method('Whitelist',
-                    Net::DBus::Binding::Value->new(&Net::DBus::Binding::Message::TYPE_UINT32, $addr));
-}
-
-sub unwhitelist {
-    my ($o, $addr) = @_;
-    $o->call_method('UnWhitelist',
-                    Net::DBus::Binding::Value->new(&Net::DBus::Binding::Message::TYPE_UINT32, $addr));
-}
-
-sub get_interactive {
-    my ($o) = @_;
-    $o->call_method('GetMode');
-}
-
-sub set_interactive {
-    my ($o, $mode) = @_;
-    $o->call_method('SetMode',
-                    Net::DBus::Binding::Value->new(&Net::DBus::Binding::Message::TYPE_UINT32, $mode));
-}
-
-sub get_reports {
-    my ($o) = @_;
-    $o->call_method('GetReports');
-}
-
-sub get_blacklist {
-    my ($o) = @_;
-    $o->call_method('GetBlacklist');
-}
-
-sub get_whitelist {
-    my ($o) = @_;
-    $o->call_method('GetWhitelist');
-}
-
-sub format_date {
-    my ($timestamp) = @_;
-    strftime("%c", localtime($timestamp));
-}
-
-sub get_service {
-    my ($port) = @_;
-    getservbyport($port, undef) || $port;
-}
-
-sub get_ip_address {
-    my ($addr) = @_;
-    inet_ntoa(pack('N', $addr));
-}
-
-sub resolve_address {
-    my ($ip_addr) = @_;
-    #- try to resolve address, timeout after 2 seconds
-    my $hostname;
-    eval {
-        local $SIG{ALRM} = sub { die "ALARM" };
-        alarm 2;
-        $hostname = gethostbyaddr(inet_aton($ip_addr), AF_INET);
-        alarm 0;
-    };
-    $hostname || $ip_addr;
-}
-
-1;
diff --git a/perl-install/network/adsl.pm b/perl-install/network/adsl.pm
deleted file mode 100644
index d12627387..000000000
--- a/perl-install/network/adsl.pm
+++ /dev/null
@@ -1,388 +0,0 @@
-package network::adsl; # $Id$
-
-use common;
-use run_program;
-use network::tools;
-use network::ethernet;
-use modules;
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(adsl_conf_backend);
-
-
-sub get_wizard {
-    my ($wiz) = @_;
-    my $netc = $wiz->{var}{netc};
-
-    my %l = (
-	     'pppoe' =>  N("use PPPoE"),
-	     'pptp'  =>  N("use PPTP"),
-	     'dhcp'  =>  N("use DHCP"),
-	     'speedtouch' => N("Alcatel Speedtouch USB") . if_($netc->{autodetect}{adsl}{speedtouch}, N(" - detected")),
-	     'sagem' =>  N("Sagem (using PPPoA) USB") . if_($netc->{autodetect}{adsl}{sagem}, N(" - detected")),
-	     'sagem_dhcp' =>  N("Sagem (using DHCP) USB") . if_($netc->{autodetect}{adsl}{sagem}, N(" - detected")),
-          # 'eci' => N("ECI Hi-Focus"), # this one needs eci agreement
-	    );
-    
-    $wiz->{var}{adsl} = {
-                         connection_list => \%l,
-                         type => "",
-                        };
-    add2hash($wiz->{pages},
-             {
-              adsl_old => {
-                       name => N("Connect to the Internet") . "\n\n" .
-                       N("The most common way to connect with adsl is pppoe.
-Some connections use PPTP, a few use DHCP.
-If you do not know, choose 'use PPPoE'"),
-                       data =>  [
-                                 {
-                                  label => N("ADSL connection type:"), val => \$wiz->{var}{adsl}{type}, list => [ sort values %l ] },
-                                ],
-                       pre => sub {
-                           $wiz->{var}{adsl}{type} = $l{sagem}; # debug
-                           $wiz->{var}{adsl}{type} ||= find { $netc->{autodetect}{adsl}{$_} } keys %l;
-                           print qq(\n\ntype is "$wiz->{var}{adsl}{type}"\n\n);
-                       },
-                       post => sub {
-                           $wiz->{var}{adsl}{type} = find { $l{$_} eq $wiz->{var}{adsl}{type} } keys %l;
-                           my $adsl   = $wiz->{var}{adsl}{connection};
-                           my $type   = $wiz->{var}{adsl}{type};
-                           my $netcnx = $wiz->{var}{netcnx};
-                           $netcnx->{type} = "adsl_$type";
-                                         
-                           $netcnx->{"adsl_$type"} = {};
-                           $netcnx->{"adsl_$type"}{vpivci} = '' if $type =~ /eci|speedtouch/;
-                           return 'ethernet' if $type eq 'dhcp';
-                           adsl_probe_info($adsl, $netc, $type);
-                           # my ($adsl, $netc, $intf, $adsl_type) = @_;
-                           # ask_info2($adsl, $netc);
-                           return "hw_account";
-                       },
-                      },
-             });
-}
-
-sub adsl_probe_info {
-    my ($adsl, $netc, $adsl_type, $o_adsl_modem) = @_;
-    my $pppoe_file = "$::prefix/etc/ppp/pppoe.conf";
-    my %pppoe_conf; %pppoe_conf = getVarsFromSh($pppoe_file) if (! defined $adsl_type || $adsl_type eq 'pppoe') && -f $pppoe_file;
-    my $login = $pppoe_conf{USER};
-    foreach (qw(/etc/ppp/peers/ppp0 /etc/ppp/options /etc/ppp/options.adsl)) {
-	($login) = map { if_(/^user\s+"([^"]+)"/, $1) } cat_("$::prefix/$_") if !$login && -r "$::prefix/$_";
-    }
-    my $passwd = passwd_by_login($login);
-    if (!$netc->{vpi} && !$netc->{vci} && member($o_adsl_modem, qw(eci speedtouch))) {
-      ($netc->{vpi}, $netc->{vci}) = 
-	(map { if_(/^.*-vpi\s+(\d+)\s+-vci\s+(\d+)/, map { sprintf("%x", $_) } $1, $2) } cat_("$::prefix/etc/ppp/peers/ppp0"));
-    }
-    $pppoe_conf{DNS1} ||= '';
-    $pppoe_conf{DNS2} ||= '';
-    add2hash($netc, { dnsServer2 => $pppoe_conf{DNS1}, dnsServer3 => $pppoe_conf{DNS2}, DOMAINNAME2 => '' });
-    add2hash($adsl, { login => $login, passwd => $passwd, passwd2 => '' });
-}
-
-sub adsl_detect() {
-    require list_modules;
-    require detect_devices;
-    my @modules = list_modules::category2modules('network/usb_dsl');
-    # return an hash compatible with what drakconnect expect us to return:
-    my %compat = (
-                  'speedtch'  => 'speedtouch',
-                  'eagle-usb' => 'sagem',
-                 );
-
-    return {
-            bewan => [ detect_devices::getBewan() ],
-            eci   => [ detect_devices::getECI() ],
-            map { $compat{$_} || $_ => [ detect_devices::matching_driver($_) ] } @modules,
-        };
-}
-
-sub sagem_set_parameters {
-    my ($netc) = @_;
-    my %l = map { $_ => sprintf("%08s", $netc->{$_}) } qw(vci vpi Encapsulation);
-    foreach my $cfg_file (qw(/etc/analog/adiusbadsl.conf /etc/eagle-usb/eagle-usb.conf)) {
-        substInFile {
-            s/Linetype=.*\n/Linetype=0000000A\n/; #- use CMVs
-            s/VCI=.*\n/VCI=$l{vci}\n/;
-            s/VPI=.*\n/VPI=$l{vpi}\n/;
-            s/Encapsulation=.*\n/Encapsulation=$l{Encapsulation}\n/;
-            s/STATIC_IP=.*\n//;
-            s!</eaglectrl>!STATIC_IP=$netc->{static_ip}\n</eaglectrl>! if $netc->{static_ip};
-            #- TODO: add ISP info, $netc->{provider_id}
-        } "$::prefix$cfg_file";
-    }
-    #- create CMV symlinks for both POTS and ISDN lines
-    foreach my $type (qw(p i)) {
-        my $cmv;
-        my ($country) = $netc->{provider_id} =~ /^([a-zA-Z]+)\d+$/;
-        #- try to find a CMV for this specific ISP
-        $cmv = "$::prefix/etc/eagle-usb/CMVe${type}$netc->{provider_id}.txt" if $netc->{provider_id};
-        #- if not found, try to found a CMV for the country
-        -f $cmv or $cmv = "$::prefix/etc/eagle-usb/CMVe${type}${country}.txt";
-        #- fallback on the generic CMV if no other matched
-        -f $cmv or $cmv = "$::prefix/etc/eagle-usb/CMVe${type}WO.txt";
-        symlinkf($cmv, "$::prefix/etc/eagle-usb/CMVe${type}.txt");
-    }
-    #- remove this otherwise eaglectrl won't start
-    unlink("$::prefix/etc/eagle-usb/eagle-usb_must_be_configured");
-}
-
-sub adsl_conf_backend {
-    my ($in, $modules_conf, $adsl, $netc, $intf, $adsl_device, $adsl_type, $o_netcnx) = @_;
-    # FIXME: should not be needed:
-    defined $o_netcnx and $netc->{adsltype} = $o_netcnx->{type};
-    $netc->{adsltype} ||= "adsl_$adsl_type";
-    $adsl_type eq 'pptp' and $adsl_device = 'pptp_modem';
-    $adsl_type eq 'capi' and $adsl_device = 'capi_modem';
-    my $bewan_module;
-    $bewan_module = $o_netcnx->{bus} eq 'PCI' ? 'unicorn_pci_atm' : 'unicorn_usb_atm' if $adsl_device eq "bewan";  
-
-    # all supported modems came with their own pppoa module, so no need for "plugin pppoatm.so"
-    my %modems =
-      (
-       bewan =>
-       {
-        start => qq(
-modprobe pppoatm
-#  ActivationMode=1
-modprobe $bewan_module
-# wait for the modem to be set up:
-sleep 10
-),
-        stop => qq(modprobe -r $bewan_module),
-        plugin => {
-                             pppoa => "pppoatm.so " . join('.', hex($netc->{vpi}), hex($netc->{vci}))
-                  },
-        ppp_options => qq(
-default-asyncmap
-hide-password
-noaccomp
-nobsdcomp
-nodeflate
-novj novjccomp
-lcp-echo-interval 20
-lcp-echo-failure 3
-sync
-),
-       },
-
-       speedtouch =>
-       {
-        modules => [ qw(speedtch) ],
-        start => '/usr/bin/speedtouch-start --nocall',
-        overide_script => 1,
-        server => {
-                   pppoa => qq("/usr/sbin/pppoa3 -c")
-                  },
-        plugin => {
-                   pppoa => "pppoatm.so " . join('.', hex($netc->{vpi}), hex($netc->{vci})),
-                  },
-        ppp_options => qq(
-sync
-noaccomp),
-        aliases => [
-                    ['char-major-108', 'ppp_generic'],
-                    ['tty-ldisc-3', 'ppp_async'],
-                    ['tty-ldisc-13', 'n_hdlc'],
-                    ['tty-ldisc-14', 'ppp_synctty'],
-                    ['ppp-compress-21', 'bsd_comp'],
-                    ['ppp-compress-24', 'ppp_deflate'],
-                    ['ppp-compress-26', 'ppp_deflate']
-                   ],
-       },
-
-       sagem =>
-       {
-        modules => [ qw(eagle-usb) ],
-        start => 'grep -qs eagle-usb /var/run/usb/* || /sbin/eaglectrl -d',
-        stop =>  "/usr/bin/killall pppoa",
-        get_intf => '/sbin/eaglectrl -i',
-        server => {
-                   pppoa => q("/sbin/fctStartAdsl -t 1 -i"),
-                  },
-        ppp_options => qq(
-mru 1492
-mtu 1492
-nobsdcomp
-nodeflate
-noaccomp -am
-novjccomp),
-        aliases => [
-                    ['char-major-108', 'ppp_generic'],
-                    ['tty-ldisc-3', 'ppp_async'],
-                    ['tty-ldisc-13', 'n_hdlc'],
-                    ['tty-ldisc-14', 'ppp_synctty']
-                   ],
-       },
-
-       eci =>
-       {
-        start => '/usr/bin/startmodem',
-        server => {
-                   pppoe => qq("/usr/bin/pppoeci -v 1 -vpi $netc->{vpi} -vci $netc->{vci}"),
-                  },
-        ppp_options => qq(
-noipdefault
-sync
-noaccomp
-linkname eciadsl
-lcp-echo-interval 0)
-                  },
-
-       pptp_modem =>
-       {
-        server => {
-                   pptp => qq("/usr/sbin/pptp 10.0.0.138 --nolaunchpppd"),
-                  },
-       },
-
-       capi_modem =>
-       {
-        ppp_options => qq(
-connect /bin/true
-ipcp-accept-remote
-ipcp-accept-local
-
-sync
-noauth
-lcp-echo-interval 5
-lcp-echo-failure 3
-lcp-max-configure 50
-lcp-max-terminate 2
-
-noccp
-noipx
-mru 1492
-mtu 1492),
-        plugin => {
-                   capi => qq(capiplugin.so
-avmadsl)
-                  },
-       },
-      );
-
-    my %generic =
-      (
-       pppoe =>
-       {
-        server => '"pppoe -I ' . ($modems{$adsl_device}{get_intf} ? "`$modems{$adsl_device}{get_intf}`" : $netc->{NET_DEVICE}) . '"',
-        ppp_options => qq(default-asyncmap
-mru 1492
-mtu 1492
-noaccomp
-noccp
-nobsdcomp
-novjccomp
-nodeflate
-lcp-echo-interval 20
-lcp-echo-failure 3
-),
-       }
-      );
-
-    if ($adsl_type =~ /^pp|^capi$/) {
-        mkdir_p("$::prefix/etc/ppp");
-        $in->do_pkgs->install('ppp') if !$>;
-        my %packages = (
-                        pppoa => [ qw(ppp-pppoatm) ],
-                        pppoe => [ qw(ppp-pppoe rp-pppoe) ],
-                        pptp  => [ qw(pptp-linux) ],
-                        capi => [ qw(isdn4k-utils) ], #- capi4linux service
-                       );
-        $in->do_pkgs->install(@{$packages{$adsl_type}}) if !$>;
-
-	my $pty_option =
-          exists $modems{$adsl_device}{server}{$adsl_type} ? "pty $modems{$adsl_device}{server}{$adsl_type}" :
-          exists $generic{$adsl_type}{server} ? "pty $generic{$adsl_type}{server}" :
-          "";
-	my $plugin = exists $modems{$adsl_device}{plugin}{$adsl_type} && "plugin $modems{$adsl_device}{plugin}{$adsl_type}";
-	my $noipdefault = $adsl_type eq 'pptp' ? '' : 'noipdefault';
-	my $ppp_options =
-          exists $modems{$adsl_device}{ppp_options} ? $modems{$adsl_device}{ppp_options} :
-          exists $generic{$adsl_type}{ppp_options} ? $generic{$adsl_type}{ppp_options} :
-          "";
-	output("$::prefix/etc/ppp/peers/ppp0",
-qq(lock
-persist
-noauth
-usepeerdns
-defaultroute
-$noipdefault
-$ppp_options
-kdebug 1
-nopcomp
-noccp
-novj
-holdoff 4
-maxfail 25
-$pty_option
-$plugin
-user "$adsl->{login}"
-));
-
-        write_secret_backend($adsl->{login}, $adsl->{passwd});
-
-        if ($netc->{NET_DEVICE} =~ /^eth/) {
-            my $net_device = $netc->{NET_DEVICE};
-            $intf->{$net_device} = {
-                                   DEVICE => $net_device,
-                                   BOOTPROTO => 'none',
-                                   NETMASK => '255.255.255.0',
-                                   NETWORK => '10.0.0.0',
-                                   BROADCAST => '10.0.0.255',
-                                   ONBOOT => 'yes',
-                                  };
-        }
-    }
-
-    #- FIXME: ppp0 and ippp0 are hardcoded
-    my $metric = network::tools::get_default_metric("adsl"); #- FIXME, do not override if already set
-    output_with_perm("$::prefix/etc/sysconfig/network-scripts/ifcfg-ppp0", 0705, qq(DEVICE=ppp0
-ONBOOT=no
-TYPE=ADSL
-METRIC=$metric
-)) unless member($adsl_type, qw(manual dhcp));
-
-    #- remove file used with sagem for dhcp/static connections
-    unlink("$::prefix/etc/sysconfig/network-scripts/ifcfg-sagem");
-
-    #- set vpi, vci and encapsulation parameters for sagem
-    if ($adsl_device eq 'sagem') {
-	$netc->{static_ip} = $intf->{sagem}{IPADDR} if $adsl_type eq 'manual';
-	sagem_set_parameters($netc);
-    }
-
-    #- set aliases
-    if (exists $modems{$adsl_device}{aliases}) {
-        $modules_conf->set_alias($_->[0], $_->[1]) foreach @{$modems{$adsl_device}{aliases}};
-        $::isStandalone and $modules_conf->write;
-    }
-    #- remove the "speedtch off" alias that was written by Mandrakelinux 10.0
-    $adsl_device eq 'speedtouch' and $modules_conf->remove_alias('speedtch');
-
-    if ($adsl_type eq "capi") {
-        require network::isdn;
-        network::isdn::setup_capi_conf($adsl->{capi});
-        services::stop("isdn4linux");
-        services::do_not_start_service_on_boot("isdn4linux");
-        services::start_service_on_boot("capi4linux");
-        services::start("capi4linux");
-
-        #- install and run drdsl for dsl connections, once capi driver is loaded
-        $in->do_pkgs->ensure_is_installed_if_available("drdsl", "/usr/sbin/drdsl");
-        run_program::rooted($::prefix, "/usr/sbin/drdsl");
-    }
-
-    #- load modules and run modem-specific start programs
-    #- useful during install, or in case the packages have been installed after the device has been plugged
-    my @modules = (@{$modems{$adsl_device}{modules}}, map { $_->[1] } @{$modems{$adsl_device}{aliases}});
-    @modules or @modules = qw(ppp_synctty ppp_async ppp_generic n_hdlc); #- required for pppoe/pptp connections
-    @modules && eval { modules::load(@modules) }
-      or log::l("failed to load " . join(',', @modules), " modules: $@");
-    $modems{$adsl_device}{start} and run_program::rooted($::prefix, $modems{$adsl_device}{start});
-}
-
-1;
diff --git a/perl-install/network/adsl_consts.pm b/perl-install/network/adsl_consts.pm
deleted file mode 100644
index 93b6dba33..000000000
--- a/perl-install/network/adsl_consts.pm
+++ /dev/null
@@ -1,969 +0,0 @@
-package network::adsl_consts; # $Id$
-
-# This should probably be splitted out into ldetect-lst as some provider db
-
-use vars qw(@ISA @EXPORT);
-use common;
-use utf8;
-
-@ISA = qw(Exporter);
-@EXPORT = qw(@adsl_data);
-
-# Originally from :
-# http://www.eagle-usb.org/article.php3?id_article=23
-# http://www.sagem.com/web-modems/download/support-fast1000-fr.htm
-# http://perso.wanadoo.fr/michel-m/protocolesfai.htm
-
-our %adsl_data = (
-                  ## format chosen is the following :
-                  # country|provider => { VPI, VCI_hexa, ... } all parameters
-                  # country is automagically translated into LANG with N function
-                  # provider is kept "as-is", not translated
-                  # provider_id is used by eagleconfig to identify an ISP (I use ISO_3166-1)
-                  #      see http://en.wikipedia.org/wiki/ISO_3166-1
-                  # url_tech : technical URL providing info about ISP
-                  # vpi : virtual path identifier
-                  # vci : virtual channel identifier (in hexa below !!)
-                  # Encapsulation:
-                  #     1=PPPoE LLC, 2=PPPoE VCmux (never used ?)
-                  #     3=RFC1483/2684 Routed IP LLC,
-                  #     4=RFC1483/2684 Routed IP (IPoA VCmux)
-                  #     5 RFC2364 PPPoA LLC,
-                  #     6 RFC2364 PPPoA VCmux
-                  #      see http://faq.eagle-usb.org/wakka.php?wiki=AdslDescription
-                  # dns are provided for when !usepeerdns in peers config file
-                  #     dnsServer2 dnsServer3 : main DNS
-                  #     dnsServers_text : string with any valid DNS (when more than 2)
-                  # DOMAINNAME2 : used for search key in /etc/resolv.conf
-                  # method : PPPoA, pppoe, static or dhcp
-                  # methods_all : all methods for connection with this ISP (when more than 1)
-                  # modem : model of modem provided by ISP or tested with ISP
-                  # please forward updates to http://forum.eagle-usb.org
-                  # try to order alphabetically by country (in English) / ISP (local language)
-
-                  N("Algeria") . "|Wanadoo" =>
-                  {
-                   provider_id => 'DZ01',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                   dnsServer2 => '82.101.136.29',
-                   dnsServer3 => '82.101.136.206',
-                  },
-
-                  N("Argentina") . "|Speedy" =>
-                  {
-                   provider_id => 'AR01',
-                   vpi => 1,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                   dnsServer2 => '200.51.254.238',
-                   dnsServer3 => '200.51.209.22',
-                  },
-
-                  N("Austria") . "|Any" =>
-                  {
-                   provider_id => 'AT00',
-                   vpi => 8,
-                   vci => 30,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Austria") . "|AON" =>
-                  {
-                   provider_id => 'AT01',
-                   vpi => 1,
-                   vci => 20,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Austria") . "|Telstra" =>
-                  {
-                   provider_id => 'AT02',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Belgium") . "|ADSL Office" =>
-                  {
-                   provider_id => 'BE04',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("Belgium") . "|Tiscali BE" =>
-                  {
-                   provider_id => 'BE01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                   dnsServer2 => '212.35.2.1',
-                   dnsServer3 => '212.35.2.2',
-                   DOMAINNAME2 => 'tiscali.be',
-                  },
-
-                  N("Belgium") . "|Belgacom" =>
-                  {
-                   provider_id => 'BE03',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Belgium") . "|Turboline" =>
-                  {
-                   provider_id => 'BE02',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 5,
-                   method => 'pppoa',
-                  },
-
-                  N("Brazil") . "|Speedy/Telefonica" =>
-                  {
-                   provider_id => 'BR01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                   dnsServer2 => '200.204.0.10',
-                   dnsServer3 => '200.204.0.138',
-                  },
-
-                  N("Brazil") . "|Velox/Telemar" =>
-                  {
-                   provider_id => 'BR02',
-                   vpi => 0,
-                   vci => 21,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Brazil") . "|Turbo/Brasil Telecom" =>
-                  {
-                   provider_id => 'BR03',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Brazil") . "|Rio Grande do Sul (RS)" =>
-                  {
-                   provider_id => 'BR04',
-                   vpi => 1,
-                   vci => 20,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Bulgaria") . "|BTK ISDN" =>
-                  {
-                   provider_id => 'BG02',
-                   vpi => 1,
-                   vci => 20,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Bulgaria") . "|BTK POTS" =>
-                  {
-                   provider_id => 'BG01',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Netcom|Beijing" =>
-                  {
-                   provider_id => 'CN01',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Netcom|Changchun" =>
-                  {
-                   provider_id => 'CN02',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Netcom|Harbin" =>
-                  {
-                   provider_id => 'CN03',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Netcom|Jilin" =>
-                  {
-                   provider_id => 'CN04',
-                   vpi => 0,
-                   vci => 27,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Netcom|Lanzhou" =>
-                  {
-                   provider_id => 'CN05',
-                   vpi => 0,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Netcom|Tianjin" =>
-                  {
-                   provider_id => 'CN06',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Netcom|Xi'an" =>
-                  {
-                   provider_id => 'CN07',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Chongqing" =>
-                  {
-                   provider_id => 'CN08',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Fujian" =>
-                  {
-                   provider_id => 'CN09',
-                   vpi => 0,
-                   vci => 0xc8,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Guangxi" =>
-                  {
-                   provider_id => 'CN10',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Guangzhou" =>
-                  {
-                   provider_id => 'CN11',
-                   vpi => 8,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Hangzhou" =>
-                  {
-                   provider_id => 'CN12',
-                   vpi => 0,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Netcom|Hunan" =>
-                  {
-                   provider_id => 'CN13',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Nanjing" =>
-                  {
-                   provider_id => 'CN14',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Shanghai" =>
-                  {
-                   provider_id => 'CN15',
-                   vpi => 8,
-                   vci => 51,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Shenzhen" =>
-                  {
-                   provider_id => 'CN16',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Urumqi" =>
-                  {
-                   provider_id => 'CN17',
-                   vpi => 0,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Wuhan" =>
-                  {
-                   provider_id => 'CN18',
-                   vpi => 0,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Yunnan" =>
-                  {
-                   provider_id => 'CN19',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("China") . "|China Telecom|Zhuhai" =>
-                  {
-                   provider_id => 'CN20',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("Czech Republic") . "|Cesky Telecom" =>
-                  {
-                   provider_id => 'CZ01',
-                   url_tech => 'http://www.telecom.cz/domacnosti/internet/pristupove_sluzby/broadband/vse_o_kz_a_moznostech_instalace.php',
-                   vpi => 8,
-                   vci => 48,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Denmark") . "|Any" =>
-                  {
-                   provider_id => 'DK01',
-                   vpi => 0,
-                   vci => 65,
-                   method => 'pppoe',
-                   Encapsulation => 3,
-                  },
-
-                  N("Finland") . "|Sonera" =>
-                  {
-                   provider_id => 'FI01',
-                   vpi => 0,
-                   vci => 64,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("France") . "|Free non dégroupé 512/128 & 1024/128" =>
-                  {
-                   provider_id => 'FR01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '213.228.0.23',
-                   dnsServer3 => '212.27.32.176',
-                   method => 'pppoa',
-                   DOMAINNAME2 => 'free.fr',
-                  },
-
-                  N("France") . "|Free dégroupé 1024/256 (mini)" =>
-                  {
-                   provider_id => 'FR04',
-                   vpi => 8,
-                   vci => 24,
-                   Encapsulation => 4,
-                   dnsServer2 => '213.228.0.23',
-                   dnsServer3 => '212.27.32.176',
-                   method => 'dhcp',
-                   DOMAINNAME2 => 'free.fr',
-                  },
-
-                  N("France") . "|n9uf tel9com 512 & dégroupé 1024" =>
-                  {
-                   provider_id => 'FR05',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '212.30.93.108',
-                   dnsServer3 => '212.203.124.146',
-                   method => 'pppoa',
-                  },
-
-                  N("France") . "|Cegetel non dégroupé 512 IP/ADSL et dégroupé" =>
-                  {
-                   provider_id => 'FR08',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '212.94.174.85',
-                   dnsServer3 => '212.94.174.86',
-                   method => 'pppoa',
-                  },
-
-                  N("France") . "|Club-Internet" =>
-                  {
-                   provider_id => 'FR06',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '194.117.200.10',
-                   dnsServer3 => '194.117.200.15',
-                   method => 'pppoa',
-                   DOMAINNAME2 => 'club-internet.fr',
-                  },
-
-                  N("France") . "|Wanadoo" =>
-                  {
-                   provider_id => 'FR09',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '80.10.246.2',
-                   dnsServer3 => '80.10.246.129',
-                   method => 'pppoa',
-                   DOMAINNAME2 => 'wanadoo.fr',
-                  },
-
-                  N("France") . "|Télé2" =>
-                  {
-                   provider_id => 'FR02',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '212.151.136.242',
-                   dnsServer3 => '130.244.127.162',
-                   method => 'pppoa',
-                  },
-
-                  N("France") . "|Tiscali.fr 128k" =>
-                  {
-                   provider_id => 'FR03',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 5,
-                   dnsServer2 => '213.36.80.1',
-                   dnsServer3 => '213.36.80.2',
-                   method => 'pppoa',
-                  },
-
-                  N("France") . "|Tiscali.fr 512k" =>
-                  {
-                   provider_id => 'FR07',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '213.36.80.1',
-                   dnsServer3 => '213.36.80.2',
-                   method => 'pppoa',
-                  },
-
-                  N("Germany") . "|Deutsche Telekom (DT)" =>
-                  {
-                   provider_id => 'DE01',
-                   vpi => 1,
-                   vci => 20,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Germany") . "|1&1" =>
-                  {
-                   provider_id => 'DE02',
-                   vpi => 1,
-                   vci => 20,
-                   Encapsulation => 1,
-                   dnsServer2 => '195.20.224.234',
-                   dnsServer3 => '194.25.2.129',
-                   method => 'pppoe',
-                  },
-
-                  N("Greece") . "|Any" =>
-                  {
-                   provider_id => 'GR01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Hungary") . "|Matav" =>
-                  {
-                   provider_id => 'HU01',
-                   vpi => 1,
-                   vci => 20,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Ireland") . "|Any" =>
-                  {
-                   provider_id => 'IE01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Israel") . "|Bezeq" =>
-                  {
-                   provider_id => 'IL01',
-                   vpi => 8,
-                   vci => 30,
-                   Encapsulation => 6,
-                   dnsServer2 => '192.115.106.10',
-                   dnsServer3 => '192.115.106.11',
-                   method => 'pppoa',
-                  },
-
-                  N("Italy") . "|Libero.it" =>
-                  {
-                   provider_id => 'IT04',
-                   url_tech => 'http://internet.libero.it/assistenza/adsl/installazione_ass.phtml',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '193.70.192.25',
-                   dnsServer3 => '193.70.152.25',
-                   method => 'pppoa',
-                  },
-
-                  N("Italy") . "|Telecom Italia" =>
-                  {
-                   provider_id => 'IT01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '195.20.224.234',
-                   dnsServer3 => '194.25.2.129',
-                   method => 'pppoa',
-                  },
-
-                  N("Italy") . "|Telecom Italia/Office Users (ADSL Smart X)" =>
-                  {
-                   provider_id => 'IT02',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'manual',
-                  },
-
-                  N("Italy") . "|Tiscali.it, Alice" =>
-                  {
-                   provider_id => 'IT03',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '195.20.224.234',
-                   dnsServer3 => '194.25.2.129',
-                   method => 'pppoa',
-                  },
-
-                  N("Lithuania") . "|Lietuvos Telekomas" =>
-                  {
-                   provider_id => 'LT01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Morocco") . "|Maroc Telecom" =>
-                  {
-                   provider_id => 'MA01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '212.217.0.1',
-                   dnsServer3 => '212.217.0.12',
-                   method => 'pppoa',
-                  },
-
-                  N("Netherlands") . "|KPN" =>
-                  {
-                   provider_id => 'NL01',
-                   vpi => 8,
-                   vci => 30,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Netherlands") . "|Eager Telecom" =>
-                  {
-                   provider_id => 'NL02',
-                   vpi => 0,
-                   vci => 21,
-                   Encapsulation => 3,
-                   method => 'dhcp',
-                  },
-
-                  N("Netherlands") . "|Tiscali" =>
-                  {
-                   provider_id => 'NL03',
-                   vpi => 0,
-                   vci => 22,
-                   Encapsulation => 3,
-                   method => 'dhcp',
-                  },
-
-                  N("Netherlands") . "|Versatel" =>
-                  {
-                   provider_id => 'NL04',
-                   vpi => 0,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'dhcp',
-                  },
-
-                  N("Norway") . "|Bluecom" =>
-                    {
-                        method => 'dhcp',
-                    },
-
-                  N("Norway") . "|Firstmile" =>
-                    {
-                        method => 'dhcp',
-                    },
-
-                  N("Norway") . "|NextGenTel" =>
-                    {
-                        method => 'dhcp',
-                    },
-
-                  N("Norway") . "|SSC" =>
-                    {
-                        method => 'dhcp',
-                    },
-
-                  N("Norway") . "|Tele2" =>
-                    {
-                        method => 'dhcp',
-                    },
-
-                  N("Norway") . "|Telenor ADSL" =>
-                    {
-                        method => 'PPPoE',
-                    },
-
-                  N("Norway") . "|Tiscali" =>
-                    {
-                        vpi => 8,
-                        vci => 35,
-                        method => 'dhcp',
-                    },
-
-                  N("Poland") . "|Telekomunikacja Polska (TPSA/neostrada)" =>
-                  {
-                   provider_id => 'PL01',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '194.204.152.34',
-                   dnsServer3 => '217.98.63.164',
-                   method => 'pppoa',
-                  },
-
-                  N("Poland") . "|Netia neostrada" =>
-                  {
-                   provider_id => 'PL02',
-                   url_tech => 'http://www.netia.pl/?o=d&s=210',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 1,
-                   dnsServer2 => '195.114.181.130',
-                   dnsServer3 => '195.114.161.61',
-                   method => 'pppoe',
-                  },
-
-                  N("Portugal") . "|PT" =>
-                  {
-                   provider_id => 'PT01',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Russia") . "|MTU-Intel" =>
-                  {
-                   provider_id => 'RU01',
-                   url_tech => 'http://stream.ru/s-requirements',
-                   vpi => 1,
-                   vci => 50,
-                   Encapsulation => 1,
-                   dnsServer2 => '212.188.4.10',
-                   dnsServer3 => '195.34.32.116',
-                   method => 'pppoe',
-                  },
-
-                  N("Slovenia") . "|SiOL" =>
-                  {
-                   provider_id => 'SL01',
-                   vpi => 1,
-                   vci => 20,
-                   method => 'pppoe',
-                   Encapsulation => 1,
-                   dnsServer2 => '193.189.160.11',
-                   dnsServer3 => '193.189.160.12',
-                   DOMAINNAME2 => 'siol.net',
-                  },
-
-                  N("Spain") . "|Telefónica IP dinámica" =>
-                  {
-                   provider_id => 'ES01',
-                   vpi => 8,
-                   vci => 20,
-                   Encapsulation => 1,
-                   dnsServer2 => '80.58.32.33',
-                   dnsServer3 => '80.58.0.97',
-                   method => 'pppoe',
-                  },
-
-                  N("Spain") . "|Telefónica ip fija" =>
-                  {
-                   provider_id => 'ES02',
-                   vpi => 8,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'static',
-                   dnsServer2 => '80.58.32.33',
-                   dnsServer3 => '80.58.0.97',
-                  },
-
-                  N("Spain") . "|Wanadoo/Eresmas Retevision" =>
-                  {
-                   provider_id => 'ES03',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 6,
-                   dnsServer2 => '80.58.0.33',
-                   dnsServer3 => '80.58.32.97',
-                   method => 'pppoa',
-                  },
-
-                  N("Spain") . "|Wanadoo PPPoE" =>
-                  {
-                   provider_id => 'ES04',
-                   vpi => 8,
-                   vci => 20,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Spain") . "|Wanadoo ip fija" =>
-                  {
-                   provider_id => 'ES05',
-                   vpi => 8,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'static',
-                  },
-
-                  N("Spain") . "|Tiscali" =>
-                  {
-                   provider_id => 'ES06',
-                   vpi => 1,
-                   vci => 20,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Spain") . "|Arrakis" =>
-                  {
-                   provider_id => 'ES07',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Spain") . "|Auna" =>
-                  {
-                   provider_id => 'ES08',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Spain") . "|Communitel" =>
-                  {
-                   provider_id => 'ES09',
-                   vpi => 0,
-                   vci => 21,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Spain") . "|Euskatel" =>
-                  {
-                   provider_id => 'ES10',
-                   vpi => 8,
-                   vci => 20,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Spain") . "|Uni2" =>
-                  {
-                   provider_id => 'ES11',
-                   vpi => 1,
-                   vci => 21,
-                   Encapsulation => 6,
-                   method => 'pppoa',
-                  },
-
-                  N("Spain") . "|Ya.com PPPoE" =>
-                  {
-                   provider_id => 'ES12',
-                   vpi => 8,
-                   vci => 20,
-                   Encapsulation => 1,
-                   method => 'pppoe',
-                  },
-
-                  N("Spain") . "|Ya.com static" =>
-                  {
-                   provider_id => 'ES13',
-                   vpi => 8,
-                   vci => 20,
-                   Encapsulation => 3,
-                   method => 'static',
-                  },
-
-                  N("Sweden") . "|Telia" =>
-                  {
-                   provider_id => 'SE01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("Switzerland") . "|Any" =>
-                  {
-                   provider_id => 'CH01',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 3,
-                   method => 'pppoe',
-                  },
-
-                  N("Switzerland") . "|BlueWin / Swisscom" =>
-                  {
-                   provider_id => 'CH02',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 5,
-                   dnsServer2 => '195.186.4.108',
-                   dnsServer3 => '195.186.4.109',
-                   method => 'pppoa',
-                  },
-
-                  N("Switzerland") . "|Tiscali.ch" =>
-                  {
-                   provider_id => 'CH03',
-                   vpi => 8,
-                   vci => 23,
-                   Encapsulation => 1,
-                   method => 'pppoa',
-                  },
-
-                  N("Thailand") . "|Asianet" =>
-                  {
-                   provider_id => 'TH01',
-                   vpi => 0,
-                   vci => 64,
-                   Encapsulation => 1,
-                   dnsServer2 => '203.144.225.242',
-                   dnsServer3 => '203.144.225.72',
-                   method => 'pppoe',
-                  },
-
-                  N("Tunisia") . "|Planet.tn" =>
-                  {
-                   provider_id => 'TH01',
-                   url_tech => 'http://www.planet.tn/',
-                   vpi => 0,
-                   vci => 23,
-                   Encapsulation => 5,
-                   dnsServer2 => '193.95.93.77',
-                   dnsServer3 => '193.95.66.10',
-                   method => 'pppoe',
-                  },
-
-                  N("United Arab Emirates") . "|Etisalat" =>
-                  {
-                   provider_id => 'AE01',
-                   vpi => 0,
-                   vci => 32,
-                   Encapsulation => 5,
-                   dnsServer2 => '213.42.20.20',
-                   dnsServer3 => '195.229.241.222',
-                   method => 'pppoa',
-                  },
-
-                  N("United Kingdom") . "|Tiscali UK " =>
-                  {
-                   provider_id => 'UK01',
-                   vpi => 0,
-                   vci => 26,
-                   Encapsulation => 6,
-                   dnsServer2 => '212.74.112.66',
-                   dnsServer3 => '212.74.112.67',
-                   method => 'pppoa',
-                  },
-
-                  N("United Kingdom") . "|British Telecom " =>
-                  {
-                   provider_id => 'UK02',
-                   vpi => 0,
-                   vci => 26,
-                   Encapsulation => 6,
-                   dnsServer2 => '194.74.65.69',
-                   dnsServer3 => '194.72.9.38',
-                   method => 'pppoa',
-                  },
-
-                 );
-
-
-1;
diff --git a/perl-install/network/dhcpd.pm b/perl-install/network/dhcpd.pm
deleted file mode 100644
index d91df441f..000000000
--- a/perl-install/network/dhcpd.pm
+++ /dev/null
@@ -1,51 +0,0 @@
-package network::dhcpd;
-
-use strict;
-use common;
-use network::network;
-
-my $sysconf_dhcpd = "$::prefix/etc/sysconfig/dhcpd";
-my $dhcpd_conf_file = "$::prefix/etc/dhcpd.conf";
-my $update_dhcp = "/usr/sbin/update_dhcp.pl";
-
-sub read_dhcpd_conf {
-    my ($o_file) = @_;
-    my $s = cat_($o_file || $dhcpd_conf_file);
-    { option_routers => [ $s =~ /^\s*option routers\s+(\S+);/mg ],
-      subnet_mask => [ if_($s =~ /^\s*option subnet-mask\s+(.*);/mg, split(' ', $1)) ],
-      domain_name => [ if_($s =~ /^\s*option domain-name\s+"(.*)";/mg, split(' ', $1)) ],
-      domain_name_servers => [ if_($s =~ /^\s*option domain-name-servers\s+(.*);/m, split(' ', $1)) ],
-      dynamic_bootp => [ if_($s =~ /^\s*range dynamic-bootp\s+\S+\.(\d+)\s+\S+\.(\d+)\s*;/m, split(' ', $1)) ],
-      default_lease_time => [ if_($s =~ /^\s*default-lease-time\s+(.*);/m, split(' ', $1)) ],
-      max_lease_time => [ if_($s =~ /^\s*max-lease-time\s+(.*);/m, split(' ', $1)) ] };
-}
-
-sub write_dhcpd_conf {
-    my ($dhcpd_conf, $device) = @_;
-
-    my ($lan) = $dhcpd_conf->{option_routers}[0] =~ /^(.*)\.\d+$/;
-    log::explanations("Configuring a DHCP server on $lan.0");
-
-    renamef($dhcpd_conf_file, "$dhcpd_conf_file.old");
-    output($dhcpd_conf_file, qq(subnet $lan.0 netmask $dhcpd_conf->{subnet_mask}[0] {
-	# default gateway
-	option routers $dhcpd_conf->{option_routers}[0];
-	option subnet-mask $dhcpd_conf->{subnet_mask}[0];
-
-	option domain-name "$dhcpd_conf->{domain_name}[0]";
-	option domain-name-servers $dhcpd_conf->{domain_name_servers}[0];
-
-	range dynamic-bootp $lan.$dhcpd_conf->{dynamic_bootp}[0] $lan.$dhcpd_conf->{dynamic_bootp}[1];
-	default-lease-time $dhcpd_conf->{default_lease_time}[0];
-	max-lease-time $dhcpd_conf->{max_lease_time}[0];
-}
-));
-
-    #- put the interface for the dhcp server in the sysconfig-dhcp config, for the /etc/init.d script of dhcpd
-    log::explanations("Update network interfaces list for dhcpd server");
-    substInFile { s/^INTERFACES\n//; $_ .= qq(INTERFACES="$device"\n) if eof } $sysconf_dhcpd if !$::testing;
-    run_program::rooted($::prefix, $update_dhcp);
-}
-
-
-1;
diff --git a/perl-install/network/drakfirewall.pm b/perl-install/network/drakfirewall.pm
deleted file mode 100644
index bc66408fa..000000000
--- a/perl-install/network/drakfirewall.pm
+++ /dev/null
@@ -1,216 +0,0 @@
-package network::drakfirewall; # $Id$
-
-use strict;
-use diagnostics;
-
-use network::shorewall;
-use common;
-
-my @all_servers = 
-(
-  { 
-   name => N_("Web Server"),
-   pkg => 'apache apache-mod_perl boa',
-   ports => '80/tcp 443/tcp',
-  },
-  {
-   name => N_("Domain Name Server"),
-   pkg => 'bind',
-   ports => '53/tcp 53/udp',
-  },
-  {
-   name => N_("SSH server"),
-   pkg => 'openssh-server',
-   ports => '22/tcp',
-  },
-  {
-   name => N_("FTP server"),
-   pkg => 'ftp-server-krb5 wu-ftpd proftpd pure-ftpd',
-   ports => '20/tcp 21/tcp',
-  },
-  {
-   name => N_("Mail Server"),
-   pkg => 'sendmail postfix qmail',
-   ports => '25/tcp',
-  },
-  {
-   name => N_("POP and IMAP Server"),
-   pkg => 'imap courier-imap-pop',
-   ports => '109/tcp 110/tcp 143/tcp',
-  },
-  {
-   name => N_("Telnet server"),
-   pkg => 'telnet-server-krb5',
-   ports => '23/tcp',
-   hide => 1,
-  },
-  {
-   name => N_("Windows Files Sharing (SMB)"),
-   pkg => 'samba-server',
-   ports => '137/tcp 137/udp 138/tcp 138/udp 139/tcp 139/udp 445/tcp 445/udp 1024:1100/tcp 1024:1100/udp',
-   hide => 1,
-  },
-  {
-   name => N_("CUPS server"),
-   pkg => 'cups',
-   ports => '631/tcp 631/udp',
-   hide => 1,
-  },
-  {
-   name => N_("Echo request (ping)"),
-   ports => '8/icmp',
-   force_default_selection => 0,
-  },
-  {
-   name => N_("BitTorrent"),
-   ports => '6881:6999/tcp',
-   hide => 1,
-   pkg => 'bittorrent bittorrent-shadowsclient',
-  },
-);
-
-sub port2server {
-    my ($port) = @_;
-    find {
-	any { $port eq $_ } split(' ', $_->{ports});
-    } @all_servers;
-}
-
-sub check_ports_syntax {
-    my ($ports) = @_;
-    foreach (split ' ', $ports) {
-	my ($nb, $range, $nb2) = m!^(\d+)(:(\d+))?/(tcp|udp|icmp)$! or return $_;
-	foreach my $port ($nb, if_($range, $nb2)) {
-	    1 <= $port && $port <= 65535 or return $_;
-	}
-	$nb < $nb2 or return $_ if $range;
-    }
-    '';
-}
-
-sub to_ports {
-    my ($servers, $unlisted) = @_;
-    join(' ', (map { $_->{ports} } @$servers), if_($unlisted, $unlisted));
-}
-
-sub from_ports {
-    my ($ports) = @_;
-
-    my @l;
-    my @unlisted;
-    foreach (split ' ', $ports) {
-	if (my $s = port2server($_)) {
-	    push @l, $s;
-	} else {
-	    push @unlisted, $_;
-	}
-    }
-    [ uniq(@l) ], join(' ', @unlisted);
-}
-
-sub default_from_pkgs {
-    my ($do_pkgs) = @_;
-    my @pkgs = $do_pkgs->are_installed(map { split ' ', $_->{pkg} } @all_servers);
-    [ grep {
-	my $s = $_;
-	exists $s->{force_default_selection} ? 
-	  $s->{force_default_selection} : 
-	  any { member($_, @pkgs) } split(' ', $s->{pkg});
-    } @all_servers ];
-}
-
-sub default_ports {
-    my ($do_pkgs) = @_;
-    to_ports(default_from_pkgs($do_pkgs), '');
-}
-
-sub get_ports() {
-    my $shorewall = network::shorewall::read() or return;
-    $shorewall->{ports};
-}
-
-sub set_ports {
-    my ($do_pkgs, $disabled, $ports, $o_in) = @_;
-
-    my $shorewall = network::shorewall::read($o_in) or return;
-
-    if (!$disabled || -x "$::prefix/sbin/shorewall") {
-	$do_pkgs->ensure_binary_is_installed('shorewall', 'shorewall', $::isInstall) or return;
-    
-	$shorewall->{disabled} = $disabled;
-	$shorewall->{ports} = $ports;
-	log::l($disabled ? "disabling shorewall" : "configuring shorewall to allow ports: $ports");
-	network::shorewall::write($shorewall);
-    }
-}
-
-sub get_conf {
-    my ($in, $disabled, $o_ports) = @_;
-		
-    my $possible_servers = default_from_pkgs($in->do_pkgs);
-    $_->{hide} = 0 foreach @$possible_servers;
-
-    if ($o_ports) {
-	$disabled, from_ports($o_ports);
-    } elsif (my $shorewall = network::shorewall::read()) {
-	$shorewall->{disabled}, from_ports($shorewall->{ports});
-    } else {
-	$in->ask_okcancel('', N("drakfirewall configurator
-
-This configures a personal firewall for this Mandriva Linux machine.
-For a powerful and dedicated firewall solution, please look to the
-specialized Mandriva Security Firewall distribution."), 1) or return;
-
-	$in->ask_okcancel('', N("drakfirewall configurator
-
-Make sure you have configured your Network/Internet access with
-drakconnect before going any further."), 1) or return;
-
-	$disabled, $possible_servers, '';
-    }
-}
-
-sub choose {
-    my ($in, $disabled, $servers, $unlisted) = @_;
-
-    $_->{on} = 0 foreach @all_servers;
-    $_->{on} = 1 foreach @$servers;
-    my @l = grep { $_->{on} || !$_->{hide} } @all_servers;
-
-    $in->ask_from_({
-		    messages => N("Which services would you like to allow the Internet to connect to?"),
-		    advanced_messages => N("You can enter miscellaneous ports. 
-Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.
-Have a look at /etc/services for information."),
-		    callbacks => {
-			complete => sub {
-			    if (my $invalid_port = check_ports_syntax($unlisted)) {
-				$in->ask_warn('', N("Invalid port given: %s.
-The proper format is \"port/tcp\" or \"port/udp\", 
-where port is between 1 and 65535.
-
-You can also give a range of ports (eg: 24300:24350/udp)", $invalid_port));
-				return 1;
-			    }
-			},
-		   } },
-		  [ 
-		   { text => N("Everything (no firewall)"), val => \$disabled, type => 'bool' },
-		   (map { { text => translate($_->{name}), val => \$_->{on}, type => 'bool', disabled => sub { $disabled } } } @l),
-		   { label => N("Other ports"), val => \$unlisted, advanced => 1, disabled => sub { $disabled } }
-		  ]) or return;
-
-    $disabled, to_ports([ grep { $_->{on} } @l ], $unlisted);
-}
-
-sub main {
-    my ($in, $disabled) = @_;
-
-    ($disabled, my $servers, my $unlisted) = get_conf($in, $disabled) or return;
-
-    ($disabled, my $ports) = choose($in, $disabled, $servers, $unlisted) or return;
-
-    set_ports($in->do_pkgs, $disabled, $ports, $in) or return;
-
-    ($disabled, $ports);
-}
diff --git a/perl-install/network/ethernet.pm b/perl-install/network/ethernet.pm
deleted file mode 100644
index 35e22308b..000000000
--- a/perl-install/network/ethernet.pm
+++ /dev/null
@@ -1,161 +0,0 @@
-package network::ethernet; # $Id$
-
-use c;
-use network::network;
-use modules;
-use modules::interactive;
-use detect_devices;
-use common;
-use run_program;
-use network::tools;
-
-our @dhcp_clients = qw(dhclient dhcpcd pump dhcpxd);
-
-sub install_dhcp_client {
-    my ($in, $ethntf) = @_;
-    my %packages = (
-        "dhclient" => "dhcp-client",
-    );
-    my $client = $ethntf->{DHCP_CLIENT};
-    #- use default dhcp client if none is provided
-    $client ||= $dhcp_clients[0];
-    $client = $packages{$client} if exists $packages{$client};
-    $in->do_pkgs->install($client);
-}
-
-sub write_ether_conf {
-    my ($in, $modules_conf, $netcnx, $netc, $intf) = @_;
-    configureNetwork2($in, $modules_conf, $::prefix, $netc, $intf);
-    $netc->{NETWORKING} = "yes";
-    if ($netc->{GATEWAY} || any { $_->{BOOTPROTO} =~ /dhcp/ } values %$intf) {
-	$netcnx->{type} = 'lan';
-	$netcnx->{NET_DEVICE} = $netc->{NET_DEVICE} = '';
-	$netcnx->{NET_INTERFACE} = 'lan'; #$netc->{NET_INTERFACE};
-    }
-    $::isStandalone and $modules_conf->write;
-    1;
-}
-
-
-sub mapIntfToDevice {
-    my ($interface) = @_;
-    my $hw_addr = c::getHwIDs($interface);
-    return {} if $hw_addr =~ /^usb/;
-    my ($bus, $slot, $func) = map { hex($_) } ($hw_addr =~ /([0-9a-f]+):([0-9a-f]+)\.([0-9a-f]+)/);
-    $hw_addr && (every { defined $_ } $bus, $slot, $func) ?
-      grep { $_->{pci_bus} == $bus && $_->{pci_device} == $slot && $_->{pci_function} == $func } detect_devices::probeall() : {};
-}
-
-
-# return list of [ intf_name, module, device_description ] tuples such as:
-# [ "eth0", "3c59x", "3Com Corporation|3c905C-TX [Fast Etherlink]" ]
-#
-# this function try several method in order to get interface's driver and description in order to support both:
-# - hotplug managed devices (USB, firewire)
-# - special interfaces (IP aliasing, VLAN)
-sub get_eth_cards {
-    my ($modules_conf) = @_;
-    my @all_cards = detect_devices::getNet();
-
-    my @devs = detect_devices::pcmcia_probe();
-    my $saved_driver;
-    # compute device description and return (interface, driver, description) tuples:
-    return map {
-        my $interface = $_;
-        my $description;
-        # 1) get interface's driver through ETHTOOL ioctl:
-        my ($a, $detected_through_ethtool);
-        $a = c::getNetDriver($interface);
-        if ($a) {
-            $detected_through_ethtool = 1;
-        } else {
-            # 2) get interface's driver through module aliases:
-            $a = $modules_conf->get_alias($interface);
-        }
-
-        # workaround buggy drivers that returns a bogus driver name for the GDRVINFO command of the ETHTOOL ioctl:
-        my %fixes = (
-                     "p80211_prism2_cs"  => 'prism2_cs',
-                     "p80211_prism2_pci" => 'prism2_pci',
-                     "p80211_prism2_usb" => 'prism2_usb',
-                     "ip1394" => "eth1394",
-                     "DL2K" => "dl2k",
-                     "hostap" => undef, #- should be either "hostap_plx", "hostap_pci" or "hostap_cs"
-                    );
-        $a = $fixes{$a} if exists $fixes{$a};
-
-        # 3) try to match a PCMCIA device for device description:
-        if (my $b = find { $_->{device} eq $interface } @devs) { # PCMCIA case
-            $a = $b->{driver};
-            $description = $b->{description};
-        } else {
-            # 4) try to lookup a device by hardware address for device description:
-            #    maybe should have we try sysfs first for robustness?
-            ($description) = (mapIntfToDevice($interface))[0]->{description};
-        }
-        # 5) try to match a device through sysfs for driver & device description:
-        #     (eg: ipw2100 driver for intel centrino do not support ETHTOOL)
-        if (!$description) {
-            my $drv = readlink("/sys/class/net/$interface/driver");
-            if ($drv && $drv =~ s!.*/!!) {
-                $a = $drv unless $detected_through_ethtool;
-                my %l;
-                my $dev_path = "/sys/class/net/$interface/device";
-                my $sysfs_fields = detect_devices::get_sysfs_device_id_map($dev_path);
-                $l{$_} = hex(chomp_(cat_("$dev_path/" . $sysfs_fields->{$_}))) foreach keys %$sysfs_fields;
-                my @cards = grep { my $dev = $_; every { $dev->{$_} eq $l{$_} } keys %l } detect_devices::probeall();
-                $description = $cards[0]{description} if @cards == 1;
-            }
-        }
-        # 6) try to match a device by driver for device description:
-        #    (eg: madwifi, ndiswrapper, ...)
-        if (!$description) {
-            my @cards = grep { $_->{driver} eq ($a || $saved_driver) } detect_devices::probeall();
-            $description = $cards[0]{description} if @cards == 1;
-        }
-        $a and $saved_driver = $a; # handle multiple cards managed by the same driver
-        [ $interface, $saved_driver, if_($description, $description) ];
-    } @all_cards;
-}
-
-sub get_eth_cards_names {
-    my (@all_cards) = @_;
-    map { $_->[0] => join(': ', $_->[0], $_->[2]) } @all_cards;
-}
-
-#- returns (link_type, mac_address)
-sub get_eth_card_mac_address {
-    my ($intf) = @_;
-    `LC_ALL= LANG= $::prefix/sbin/ip -o link show $intf 2>/dev/null` =~ m|.*link/(\S+)\s([0-9a-z:]+)\s|;
-}
-
-#- write interfaces MAC address in iftab
-sub update_iftab() {
-    foreach my $intf (detect_devices::getNet()) {
-        my ($link_type, $mac_address) = get_eth_card_mac_address($intf) or next;
-        #- do not write zeroed MAC addresses in iftab, it confuses ifrename
-        $mac_address =~ /^[0:]+$/ and next;
-        my $descriptor = ${{ ether => 'mac', ieee1394 => 'mac_ieee1394' }}{$link_type} or next;
-        substInFile {
-            s/^$intf\s+.*\n//;
-            s/^.*\s+$mac_address\n//;
-            $_ .= qq($intf\t$descriptor $mac_address\n) if eof;
-        } "$::prefix/etc/iftab";
-    }
-}
-
-# automatic net aliases configuration
-sub configure_eth_aliases {
-    my ($modules_conf) = @_;
-    my @pcmcia_interfaces = map { $_->{device} } detect_devices::pcmcia_probe();
-    foreach my $card (get_eth_cards($modules_conf)) {
-        if (member($card->[0], @pcmcia_interfaces)) {
-            #- do not write aliases for pcmcia cards, or cardmgr will not be loaded
-            $modules_conf->remove_alias($card->[0]);
-        } else {
-            $modules_conf->set_alias($card->[0], $card->[1]);
-        }
-    }
-}
-
-1;
diff --git a/perl-install/network/ipsec.pm b/perl-install/network/ipsec.pm
deleted file mode 100644
index c0ee6e2fb..000000000
--- a/perl-install/network/ipsec.pm
+++ /dev/null
@@ -1,801 +0,0 @@
-package network::ipsec;
-
-
-
-use detect_devices;
-use network::netconnect;
-use run_program;
-use common;
-use log;
-use Data::Dumper;
-
-#- debugg functions ----------
-sub recreate_ipsec_conf {
-	my ($ipsec, $kernel_version) = @_;
-	if ($kernel_version < 2.5) {
-	#- kernel 2.4 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			print "$ipsec->{$key1}\n" if ! $ipsec->{$key1}{1};
-			foreach my $key2 (ikeys %{$ipsec->{$key1}}) {
-				if ($ipsec->{$key1}{$key2}[0] =~ m/^#/) {
-					print "\t$ipsec->{$key1}{$key2}[0]\n";
-				} elsif ($ipsec->{$key1}{$key2}[0] =~ m/(conn|config|version)/) {
-					print "$ipsec->{$key1}{$key2}[0] $ipsec->{$key1}{$key2}[1]\n";
-				} else {
-					print "\t$ipsec->{$key1}{$key2}[0]=$ipsec->{$key1}{$key2}[1]\n";
-				};
-			}
-		}
-	} else { 
-	#- kernel 2.6 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			if (! $ipsec->{$key1}{command}) {
-				print "$ipsec->{$key1}\n";
-			} else {	
-				print 	$ipsec->{$key1}{command} . " " .
-					$ipsec->{$key1}{src_range} . " " .
-					$ipsec->{$key1}{dst_range} . " " .
-					$ipsec->{$key1}{upperspec} . " " .
-					$ipsec->{$key1}{flag} . " " .
-					$ipsec->{$key1}{direction} . " " .
-					$ipsec->{$key1}{ipsec} . "\n\t" .
-					$ipsec->{$key1}{protocol} . "/" .
-					$ipsec->{$key1}{mode} . "/" .
-					$ipsec->{$key1}{src_dest} . "/" .
-					$ipsec->{$key1}{level} . ";\n"
-			}; 
-		}
-	}
-}
-
-sub recreate_racoon_conf {
-	my ($racoon) = @_;
-	my $in_a_section = "n";
-	my $in_a_proposal_section = "n";
-	foreach my $key1 (ikeys %$racoon) {
-		if ($in_a_proposal_section eq "y") {
-			print "\t}\n}\n$racoon->{$key1}\n" if ! $racoon->{$key1}{1};
-		} elsif ($in_a_section eq "y") {
-			print "}\n$racoon->{$key1}\n" if ! $racoon->{$key1}{1};
-		} else {
-			print "$racoon->{$key1}\n" if ! $racoon->{$key1}{1};
-		};
-			$in_a_section = "n";
-			$in_a_proposal_section = "n";
-		foreach my $key2 (ikeys %{$racoon->{$key1}}) {
-			 if ($racoon->{$key1}{$key2}[0] =~ /^path/) {
-				print "$racoon->{$key1}{$key2}[0] $racoon->{$key1}{$key2}[1] $racoon->{$key1}{$key2}[2];\n";
-			 } elsif ($racoon->{$key1}{$key2}[0] =~ /^remote/) {
-				$in_a_section = "y";
-				$in_a_proposal_section = "n";
-				print "$racoon->{$key1}{$key2}[0] $racoon->{$key1}{$key2}[1] {\n";
-			 } elsif ($racoon->{$key1}{$key2}[0] =~ /^sainfo/) {
-				$in_a_section = "y";
-				$in_a_proposal_section = "n";
-				if ($racoon->{$key1}{$key2}[2] && $racoon->{$key1}{$key2}[5]) {
-					print  "$racoon->{$key1}{$key2}[0] $racoon->{$key1}{$key2}[1] $racoon->{$key1}{$key2}[2] $racoon->{$key1}{$key2}[3] $racoon->{$key1}{$key2}[4] $racoon->{$key1}{$key2}[5] $racoon->{$key1}{$key2}[6] {\n";
-				} else {
-					print "$racoon->{$key1}{$key2}[0] anonymous {\n";
-				}
-			} elsif ($racoon->{$key1}{$key2}[0] =~ /^proposal /) {
-				$in_a_proposal_section = "y";
-				print "\t$racoon->{$key1}{$key2}[0] {\n";
-			} elsif ($in_a_section eq "y" && $racoon->{$key1}{$key2}[0] =~ /^certificate_type/) {
-				print "\t$racoon->{$key1}{$key2}[0] $racoon->{$key1}{$key2}[1] $racoon->{$key1}{$key2}[2] $racoon->{$key1}{$key2}[3];\n";
-			} elsif ($in_a_section eq "y" && $racoon->{$key1}{$key2}[0] =~ /^#/) {
-				print "\t$racoon->{$key1}{$key2}[0] $racoon->{$key1}{$key2}[1]\n";
-			} elsif ($in_a_section eq "y") {
-				print "\t$racoon->{$key1}{$key2}[0] $racoon->{$key1}{$key2}[1];\n";
-			} elsif ($in_a_proposal_section eq "y" && $racoon->{$key1}{$key2}[0] =~ /^#/) {
-				print "\t\t$racoon->{$key1}{$key2}[0] $racoon->{$key1}{$key2}[1]\n";
-			} elsif ($in_a_proposal_section eq "y") {
-				print "\t\t$racoon->{$key1}{$key2}[0] $racoon->{$key1}{$key2}[1];\n";
-			}
-		}
-	}
-
-print "}\n";
-}
-
-sub recreate_ipsec_conf1_k24 {
-	my ($ipsec) = @_;
-	foreach my $key1 (ikeys %$ipsec) {
-	print "$key1-->$ipsec->{$key1}\n" if ! $ipsec->{$key1}{1};
-		foreach my $key2 (ikeys %{$ipsec->{$key1}}) {
-			if ($ipsec->{$key1}{$key2}[0] =~ m/^#/) {
-			print "\t$key2-->$ipsec->{$key1}{$key2}[0]\n";
-			} elsif ($ipsec->{$key1}{$key2}[0] =~ m/(conn|config|version)/) {
-				print "$key1-->$key2-->$ipsec->{$key1}{$key2}[0] $ipsec->{$key1}{$key2}[1]\n";
-			} else {
-				print "\t$key2-->$ipsec->{$key1}{$key2}[0]=$ipsec->{$key1}{$key2}[1]\n";
-			};
-		}
-	}
-}
-#- end of debug functions --------
-
-sub sys { system(@_) == 0 or log::l("[drakvpn] Warning, sys failed for $_[0]") }
-
-sub start_daemons () {
-    return if $::testing;
-    log::explanations("Starting daemons");
-	if (-e "/etc/rc.d/init.d/ipsec") {
-   		system("/etc/rc.d/init.d/ipsec status >/dev/null") == 0 and sys("/etc/rc.d/init.d/ipsec stop");
-	    sys("/etc/rc.d/init.d/$_ start >/dev/null"), sys("/sbin/chkconfig --level 345 $_ on") foreach 'ipsec';
-	} else {
-
-	};
-	    sys("/etc/rc.d/init.d/$_ start >/dev/null"), sys("/sbin/chkconfig --level 345 $_ on") foreach 'shorewall';
-}
-
-sub stop_daemons () {
-    return if $::testing;
-    log::explanations("Stopping daemons");
-	if (-e "/etc/rc.d/init.d/ipsec") {
-    	foreach (qw(ipsec)) {
-			system("/etc/rc.d/init.d/$_ status >/dev/null 2>/dev/null") == 0 and sys("/etc/rc.d/init.d/$_ stop");
-	    };
-		sys("/sbin/chkconfig --level 345 $_ off") && -e "/etc/rc.d/init.d/$_" foreach 'ipsec';
-	};
-	    system("/etc/rc.d/init.d/shorewall status >/dev/null 2>/dev/null") == 0 and sys("/etc/rc.d/init.d/shorewall stop >/dev/null");
-
-}
-
-sub set_config_file {
-    my ($file, @l) = @_;
-
-    my $done;
-    substInFile {
-	if (!$done && (/^#LAST LINE/ || eof)) {
-	    $_ = join('', map { join("\t", @$_) . "\n" } @l) . $_;
-	    $done = 1;
-	} else {
-	    $_ = '' if /^[^#]/;
-	}
-    } "$::prefix/$file";
-}
-
-sub get_config_file {
-    my ($file) = @_;
-    map { [ split ' ' ] } grep { !/^#/ } cat_("$::prefix/$file");
-}
-
-
-#-------------------------------------------------------------------
-#---------------------- configure racoon_conf -----------------------
-#-------------------------------------------------------------------
-
-sub read_racoon_conf {
-	my ($racoon_conf) = @_;
-	my %conf;
-	my $nb = 0; #total number
-	my $i = 0; #nb within a section 
-	my $in_a_section = "n";
-	my @line1;
-	my $line = "";
-	local $_;
-	open(my $LIST, "< $racoon_conf"); 
-	while (<$LIST>) {
-       		chomp($_);
-			$line = $_;
-			$in_a_section = "n" if $line =~ /}/ && $line !~ /^#/; 
-			$line =~ s/^\s+|\s*;|\s*{//g if $line !~ /^#/;
-			$line =~ /(.*)#(.*)/ if $line !~ /^#/; #- define before and after comment
-#			print "--line-->$line\n";
-	                my $data_part = $1;
-        	        my $comment_part = "#".$2;
-			if ($data_part) {
-				$data_part =~ s/,//g;
-#				print "@@".$data_part."->".$comment_part."\n";
-				@line1 = split /\s+/,$data_part;
-				@line1 = (@line1, $comment_part) if $comment_part;
-			} else {
-				@line1 = split /\s+/,$line;
-			}
-			if (!$line && $in_a_section eq "n") {
-				$nb++;
-				put_in_hash(\%conf, { $nb => $line });
-				$in_a_section = "n";
-			} elsif (!$line && $in_a_section eq "y") {
-				put_in_hash($conf{$nb} ||= {}, { $i => [ '' ] });
-				$i++;
-			} elsif ($line =~ /^path/) {
-				$i=1;
-				$nb++;
-				put_in_hash($conf{$nb} ||= {}, { $i => [@line1] });
-				$in_a_section = "n";
-				$i++;
-			} elsif ($line =~ /^#|^{|^}/) {
-				if ($in_a_section eq "y") {
-					put_in_hash($conf{$nb} ||= {}, { $i => [$line] });
-					$i++;
-				} else {
-					$nb++;
-					put_in_hash(\%conf, { $nb => $line });
-					$in_a_section = "n";
-				};
-			} elsif ($line =~ /^sainfo|^remote|^listen|^timer|^padding/ && $in_a_section eq "n") {
-				$i=1;
-				$nb++;
-				put_in_hash($conf{$nb} ||= {}, { $i => [@line1] });
-				$in_a_section = "y";
-				$i++;
-			} elsif ($line eq "proposal" && $in_a_section eq "y") {
-				$i=1;
-				$nb++;
-				put_in_hash($conf{$nb} ||= {}, { $i => [@line1] });
-				$in_a_section = "y";
-				$i++;
-			} else {
-				put_in_hash($conf{$nb} ||= {}, { $i => [@line1]  });
-				$i++;
-			};
-	};
-	
-\%conf;
-}
-
-sub display_racoon_conf {
-	my ($racoon) = @_;
-	my $display = "";
-	my $prefix_to_simple_line = "";
-	my $pt;
-	foreach my $key1 (ikeys %$racoon) {
-		if (!$racoon->{$key1}{1}) {
-			$display .= $prefix_to_simple_line . $racoon->{$key1} . "\n";
-			$prefix_to_simple_line = "";
-		} else {
-			foreach my $key2 (ikeys %{$racoon->{$key1}}) {
-				if ($key2 > 1) {
-					$pt = $racoon->{$key1}{$key2-1}[0];
-				} else {
-					$pt = $racoon->{$key1}{1}[0];
-				};
-				my $t = $racoon->{$key1}{1}[0];
-				my $f = $racoon->{$key1}{$key2}[0];
-				my $list_length = scalar @{$racoon->{$key1}{$key2}};
-				my $already_read = 0;
-				my $line = "";
-				
-				if ($racoon->{$key1}{$key2}[0] eq "sainfo" && !$racoon->{$key1}{$key2}[2]) {
-					$line = "sainfo anonymous";
-				} else {
-					for (my $i = 0; $i <= $list_length-1; $i++) {	
-
-						my $c = $racoon->{$key1}{$key2}[$i];
-						my $n = $racoon->{$key1}{$key2}[$i+1];
-
-						if ($c =~ /^path|^log|^timer|^listen|^padding|^remote|^proposal|^sainfo/) {
-							$line .= "$c "; 
-						} elsif ($i == $list_length-2 && $n =~ /^#/) {
-							$line .= "$c; "; 
-						} elsif ($i == $list_length-1) {
-							if ($f =~ /^#|^$|^timer|^listen|^padding|^remote|^proposal\s+|^sainfo/) {
-								$line .= $c; 
-							} elsif ($c =~ /^#/) {
-								$line .= "\t$c"; 
-							} else {
-								$line .= "$c;"; 
-							}
-						} else {
-							$line .= "$c "; 
-						}
-	
-						$already_read = 1;
-					}
-				}
-	
-				if ($f =~ /^timer|^listen|^padding|^remote|^sainfo/) {
-					$line .= " {";
-					$prefix_to_simple_line = "";
-				} elsif ($f eq "proposal") {
-					$line = "\t" . $line . " {";
-				} elsif ($t eq "proposal") {
-					$line = "\t\t" . $line if $line ne "proposal";
-					$prefix_to_simple_line = "\t";
-				} else {
-					$line = "\t" . $line if $t !~ /^path|^log/;
-					$prefix_to_simple_line = "";
-				}
-				$display .= "$line\n";
-			}
-		}
-	}
-
-$display;
-
-}
-
-sub write_racoon_conf {
-	my ($racoon_conf, $racoon) = @_;
-	my $display = "";
-	my $prefix_to_simple_line = "";
-	my $pt;
-	foreach my $key1 (ikeys %$racoon) {
-		if (!$racoon->{$key1}{1}) {
-			$display .= $prefix_to_simple_line . $racoon->{$key1} . "\n";
-			$prefix_to_simple_line = "";
-		} else {
-			foreach my $key2 (ikeys %{$racoon->{$key1}}) {
-				if ($key2 > 1) {
-					$pt = $racoon->{$key1}{$key2-1}[0];
-				} else {
-					$pt = $racoon->{$key1}{1}[0];
-				};
-				my $t = $racoon->{$key1}{1}[0];
-				my $f = $racoon->{$key1}{$key2}[0];
-				my $list_length = scalar @{$racoon->{$key1}{$key2}};
-				my $already_read = 0;
-				my $line = "";
-
-				if ($racoon->{$key1}{$key2}[0] eq "sainfo" && !$racoon->{$key1}{$key2}[2]) {
-					$line = "sainfo anonymous";
-				} else {
-					for (my $i = 0; $i <= $list_length-1; $i++) {	
-	
-						my $c = $racoon->{$key1}{$key2}[$i];
-						my $n = $racoon->{$key1}{$key2}[$i+1];
-	
-						if ($c =~ /^path|^log|^timer|^listen|^padding|^remote|^proposal|^sainfo/) {
-							$line .= "$c "; 
-						} elsif ($i == $list_length-2 && $n =~ /^#/) {
-							$line .= "$c; "; 
-						} elsif ($i == $list_length-1) {
-							if ($f =~ /^#|^$|^timer|^listen|^padding|^remote|^proposal\s+|^sainfo/) {
-								$line .= $c; 
-							} elsif ($c =~ /^#/) {
-								$line .= "\t$c"; 
-							} else {
-								$line .= "$c;"; 
-							}
-						} else {
-							$line .= "$c "; 
-						}
-	
-						$already_read = 1;
-					}
-				}
-
-				if ($f =~ /^timer|^listen|^padding|^remote|^sainfo/) {
-					$line .= " {";
-					$prefix_to_simple_line = "";
-				} elsif ($f eq "proposal") {
-					$line = "\t" . $line . " {";
-				} elsif ($t eq "proposal") {
-					$line = "\t\t" . $line if $line ne "proposal";
-					$prefix_to_simple_line = "\t";
-				} else {
-					$line = "\t" . $line if $t !~ /^path|^log/;
-					$prefix_to_simple_line = "";
-				}
-				$display .= "$line\n";
-			}
-		}
-	}
-
-open(my $ADD, "> $racoon_conf") or die "Can not open the $racoon_conf file for writing";
-	print $ADD "$display\n";
-
-}
-
-sub get_section_names_racoon_conf {
-  my ($racoon) = @_;
-  my @section_names;
-
-	foreach my $key1 (ikeys %$racoon) {
-		if (!$racoon->{$key1}{1}) {
-			next;
-		} else {
-			my $list_length = scalar @{$racoon->{$key1}{1}};
-			my $section_title = "";
-			my $separator = "";
-			for (my $i = 0; $i <= $list_length-1; $i++) {	
-				my $s = $racoon->{$key1}{1}[$i];
-				if ($s !~ /^#|^proposal/) {
-					$section_title .=  $separator . $s;
-					$separator = " ";
-				};
-			}
-			push(@section_names, $section_title) if $section_title ne "";
-		}
-	}
-
-	@section_names;
-
-}
-
-sub add_section_racoon_conf {
-	my ($new_section, $racoon) = @_;
-	put_in_hash($racoon, { max(keys %$racoon) + 1 => '' });
-	put_in_hash($racoon, { max(keys %$racoon) + 1 => $new_section });
-	put_in_hash($racoon, { max(keys %$racoon) + 1 => '}' }) if $new_section->{1}[0] !~ /^path|^remote/;
-	put_in_hash($racoon, { max(keys %$racoon) + 1 => '' }) if $new_section->{1}[0] =~ /^proposal/;
-	put_in_hash($racoon, { max(keys %$racoon) + 1 => '}' }) if $new_section->{1}[0] =~ /^proposal/;
-}
-
-sub matched_section_key_number_racoon_conf {
-  my ($section_name, $racoon) = @_;
-	foreach my $key1 (ikeys %$racoon) {
-		if (!$racoon->{$key1}{1}) {
-			next;
-		} else  {
-			my $list_length = scalar @{$racoon->{$key1}{1}};
-			my $section_title = "";
-			my $separator = "";
-			for (my $i = 0; $i <= $list_length-1; $i++) {	
-				my $s = $racoon->{$key1}{1}[$i];
-				if ($s !~ /^#|^proposal/) {
-					$section_title .=  $separator . $s;
-					$separator = " ";
-				};
-			};
-			if ($section_title eq $section_name) {
-				return $key1;
-			};
-		}
-	}
-
-}
-
-sub already_existing_section_racoon_conf {
-  my ($section_name, $racoon, $racoon_conf) = @_;
-  if (-e $racoon_conf) {
-	foreach my $key1 (ikeys %$racoon) {
-		if (!$racoon->{$key1}{1}) {
-			next;
-		} elsif (find {
-			my $list_length = scalar @{$racoon->{$key1}{1}};
-			my $section_title = "";
-			my $separator = "";
-			for (my $i = 0; $i <= $list_length-1; $i++) {	
-				my $s = $racoon->{$key1}{1}[$i];
-				if ($s !~ /^#|^proposal/) {
-					$section_title .=  $separator . $s;
-					$separator = " ";
-				};
-			}
-
-			$section_title eq $section_name;
-
-			} ikeys %{$racoon->{$key1}}) {
-
-			return "already existing";
-		}
-	}
-  }
-
-}
-
-sub remove_section_racoon_conf {
-	my ($section_name, $racoon, $k) = @_;
-	if ($section_name =~ /^remote/) {
-
-		delete $racoon->{$k} if $k > 1 && !$racoon->{$k-1};
-		my $closing_curly_bracket = 0;
-		while ($closing_curly_bracket < 2) {
-			print "-->$k\n";
-			$closing_curly_bracket++ if $racoon->{$k} eq "}"; 
-			delete $racoon->{$k};
-			$k++;
-		}
-
-	} elsif ($section_name =~ /^path/) {
-
-		delete $racoon->{$k};
-		delete $racoon->{$k+1} if $racoon->{$k+1}{1} eq "";
-
-	} else {
-
-		delete $racoon->{$k};
-		delete $racoon->{$k+1} if $racoon->{$k+1}{1} eq "";
-		delete $racoon->{$k+2} if $racoon->{$k+2}{1} eq ""; #- remove assoc } 
-
-	}
-
-}
-
-#-------------------------------------------------------------------
-#---------------------- configure ipsec_conf -----------------------
-#-------------------------------------------------------------------
-
-sub read_ipsec_conf {
-	my ($ipsec_conf, $kernel_version) = @_;
-	my %conf;
-	my $nb = 0; #total number
-	my $i = 0; #nb within a connexion
-	my $in_a_conn = "n";
-	my $line = "";
-	my @line1;
-	local $_;
-	if ($kernel_version < 2.5) {
-	#- kernel 2.4 part -------------------------------
-		open(my $LIST, "< $ipsec_conf"); #or die "Can not open the $ipsec_conf file for reading";
-		while (<$LIST>) {
-        		chomp($_);
-				$line = $_;
-				$line =~ s/^\s+//;
-				if (!$line) {
-					$nb++;
-					put_in_hash(\%conf, { $nb => $line });
-					$in_a_conn = "n";
-				} elsif ($line =~ /^#/) {
-					if ($in_a_conn eq "y") {
-						put_in_hash($conf{$nb} ||= {}, { $i => [$line] });
-						$i++;
-					} else {
-						$nb++;
-						put_in_hash(\%conf, { $nb => $line });
-						$in_a_conn = "n";
-					};
-				} elsif ($line =~ /^conn|^config|^version/ && $in_a_conn eq "n") {
-					@line1 = split /\s+/,$line;
-					$i=1;
-					$nb++;
-					put_in_hash($conf{$nb} ||= {}, { $i => [$line1[0], $line1[1]] });
-					$in_a_conn = "y" if $line !~ /^version/;
-					$i++;
-				} elsif ($line =~ /^conn|^config|^version/ && $in_a_conn eq "y") {
-					@line1 = split /\s+/,$line;
-					$i=1;
-					$nb++;
-					put_in_hash($conf{$nb} ||= {}, { $i => [$line1[0], $line1[1]] });
-					$i++;
-				} else {
-					@line1 = split /=/,$line;
-					put_in_hash($conf{$nb} ||= {}, { $i => [$line1[0], $line1[1]] });
-					$i++;
-				};
-		};
-	
-	} else {
-	#- kernel 2.6 part -------------------------------
-		my @mylist;
-		my $myline = "";
-		open(my $LIST, "< $ipsec_conf"); #or die "Can not open the $ipsec_conf file for reading";
-			while (<$LIST>) {
-		        	chomp($_);
-				$myline = $_;
-				$myline =~ s/^\s+//;
-				$myline =~ s/;$//;
-				if ($myline =~ /^spdadd/) {
-					@mylist = split /\s+/,$myline;
-					$in_a_conn = "y";
-					$nb++;
-					next;
-				} elsif ($in_a_conn eq "y") {
-					@mylist = (@mylist, split '\s+|/',$myline);
-					put_in_hash(\%conf, { $nb =>  {	command => $mylist[0],
-									src_range => $mylist[1],
-									dst_range => $mylist[2],
-									upperspec => $mylist[3],
-									flag => $mylist[4],
-									direction => $mylist[5],
-									ipsec => $mylist[6],
-									protocol => $mylist[7],
-									mode => $mylist[8],
-									src_dest => $mylist[9],
-									level => $mylist[10] } }); 
-					$in_a_conn = "n";		
-				} else {
-					$nb++;
-					put_in_hash(\%conf, { $nb => $myline });
-				};
-			};
-	
-		};
-
-	\%conf;
-}
-
-sub write_ipsec_conf {
-    my ($ipsec_conf, $ipsec, $kernel_version) = @_;
-	if ($kernel_version < 2.5) {
-	#- kernel 2.4 part -------------------------------
-		open(my $ADD, "> $ipsec_conf") or die "Can not open the $ipsec_conf file for writing";
-			foreach my $key1 (ikeys %$ipsec) {
-				print $ADD "$ipsec->{$key1}\n" if ! $ipsec->{$key1}{1};
-				foreach my $key2 (ikeys %{$ipsec->{$key1}}) {
-					if ($ipsec->{$key1}{$key2}[0] =~ m/^#/) {
-						print $ADD "\t$ipsec->{$key1}{$key2}[0]\n";
-					} elsif ($ipsec->{$key1}{$key2}[0] =~ m/(^conn|^config|^version)/) {
-						print $ADD "$ipsec->{$key1}{$key2}[0] $ipsec->{$key1}{$key2}[1]\n";
-					} else {
-						print $ADD "\t$ipsec->{$key1}{$key2}[0]=$ipsec->{$key1}{$key2}[1]\n" if $ipsec->{$key1}{$key2}[0] && $ipsec->{$key1}{$key2}[1];
-					};
-				}
-			}
-	} else {
-	#- kernel 2.6 part -------------------------------
-		my $display = "";
-		foreach my $key1 (ikeys %$ipsec) {
-			if (! $ipsec->{$key1}{command}) {
-				$display .= "$ipsec->{$key1}\n";
-			} else {
-				$display .=	$ipsec->{$key1}{command} . " " .
-						$ipsec->{$key1}{src_range} . " " .
-						$ipsec->{$key1}{dst_range} . " " .
-						$ipsec->{$key1}{upperspec} . " " .
-						$ipsec->{$key1}{flag} . " " .
-						$ipsec->{$key1}{direction} . " " .
-						$ipsec->{$key1}{ipsec} . "\n\t" .
-						$ipsec->{$key1}{protocol} . "/" .
-						$ipsec->{$key1}{mode} . "/" .
-						$ipsec->{$key1}{src_dest} . "/" .
-						$ipsec->{$key1}{level} . ";\n"
-			}; 
-		}
-		open(my $ADD, "> $ipsec_conf") or die "Can not open the $ipsec_conf file for writing";
-			print $ADD $display;
-		}
-}
-
-sub display_ipsec_conf {
-	my ($ipsec, $kernel_version) = @_;
-	my $display = "";
-
-	if ($kernel_version < 2.5) {
-	#- kernel 2.4 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			$display .= "$ipsec->{$key1}\n" if ! $ipsec->{$key1}{1};
-			foreach my $key2 (ikeys %{$ipsec->{$key1}}) {
-				if ($ipsec->{$key1}{$key2}[0] =~ m/^#/) {
-					$display .= "\t$ipsec->{$key1}{$key2}[0]\n";
-				} elsif ($ipsec->{$key1}{$key2}[0] =~ m/(^conn|^config|^version)/) {
-					$display .= "$ipsec->{$key1}{$key2}[0] $ipsec->{$key1}{$key2}[1]\n";
-				} else {
-					$display .= "\t$ipsec->{$key1}{$key2}[0]=$ipsec->{$key1}{$key2}[1]\n";
-				};
-			}
-		}
-
-	} else {
-	#- kernel 2.6 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			if (! $ipsec->{$key1}{command}) {
-				$display .= "$ipsec->{$key1}\n";
-			} else {
-				$display .=	$ipsec->{$key1}{command} . " " .
-						$ipsec->{$key1}{src_range} . " " .
-						$ipsec->{$key1}{dst_range} . " " .
-						$ipsec->{$key1}{upperspec} . " " .
-						$ipsec->{$key1}{flag} . " " .
-						$ipsec->{$key1}{direction} . " " .
-						$ipsec->{$key1}{ipsec} . "\n\t" .
-						$ipsec->{$key1}{protocol} . "/" .
-						$ipsec->{$key1}{mode} . "/" .
-						$ipsec->{$key1}{src_dest} . "/" .
-						$ipsec->{$key1}{level} . ";\n";
-			} 
-		}
-
-	}
-
-	$display;
-
-}
-
-sub get_section_names_ipsec_conf {
-	my ($ipsec, $kernel_version) = @_;
-	my @section_names;
-
-	if ($kernel_version < 2.5) {
-	#- kernel 2.4 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			foreach my $key2 (ikeys %{$ipsec->{$key1}}) {
-				if ($ipsec->{$key1}{$key2}[0] =~ m/(^conn|^config|^version)/) {
-					push(@section_names, "$ipsec->{$key1}{$key2}[0] $ipsec->{$key1}{$key2}[1]");
-				};
-			}
-		}
-
-	} else {
-	#- kernel 2.6 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-				if ($ipsec->{$key1}{command} =~ m/(^spdadd)/) {
-					push(@section_names, "$ipsec->{$key1}{src_range} $ipsec->{$key1}{dst_range}");
-				};
-		}
-	}
-
-	@section_names;
-
-}
-
-sub remove_section_ipsec_conf {
-	my ($section_name, $ipsec, $kernel_version) = @_;
-	if ($kernel_version < 2.5) {
-	#- kernel 2.4 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			if (find {
-				my $s = $ipsec->{$key1}{$_}[0];
-				$s !~ /^#/ && $s =~ m/(^conn|^config|^version)/ &&
-				$section_name eq "$s $ipsec->{$key1}{$_}[1]";	
-			} ikeys %{$ipsec->{$key1}}) {
-					delete $ipsec->{$key1};
-			}
-		}
-	} else {
-	#- kernel 2.6 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			if (find {
-				my $s = "$ipsec->{$key1}{src_range} $ipsec->{$key1}{dst_range}";
-				$s !~ /^#/ && $ipsec->{$key1}{src_range} && $section_name eq $s;
-			} ikeys %{$ipsec->{$key1}}) {
-				delete $ipsec->{$key1-1};
-				delete $ipsec->{$key1};
-			}
-		}
-	}
-} 
-
-sub add_section_ipsec_conf {
-	my ($new_section, $ipsec) = @_;
-	put_in_hash($ipsec, { max(keys %$ipsec) + 1 => '' });
-	put_in_hash($ipsec, { max(keys %$ipsec) + 1 => $new_section });
-}
-
-sub already_existing_section_ipsec_conf {
-	my ($section_name, $ipsec, $kernel_version) = @_;
-	if ($kernel_version < 2.5) {
-	#- kernel 2.4 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-				if (find {
-					my $s = $ipsec->{$key1}{$_}[0];
-					$s !~ /^#/ && $s =~ m/(^conn|^config|^version)/ &&
-					$section_name eq "$s $ipsec->{$key1}{$_}[1]";	
-				} ikeys %{$ipsec->{$key1}}) {
-					return "already existing";
-				}
-		}
-	} else {
-	#- kernel 2.6 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			if (find {
-				my $s = "$ipsec->{$key1}{src_range} $ipsec->{$key1}{dst_range}";
-				$s !~ /^#/ && $ipsec->{$key1}{src_range} &&
-				$section_name eq $s;
-			} ikeys %{$ipsec->{$key1}}) {
-				return "already existing";
-			}
-		}
-	};
-	return "no";
-}
-
-#- returns the reference to the dynamical list for editing
-sub dynamic_list {
-	my ($number, $ipsec) = @_;
-	my @list = 	map { { 	label   => $ipsec->{$number}{$_}[0] . "=",
-					val     => \$ipsec->{$number}{$_}[1] } } ikeys %{$ipsec->{$number}};
-
-	@list;
-}
-
-#- returns the hash key number of $section_name
-sub matched_section_key_number_ipsec_conf {
-	my ($section_name, $ipsec, $kernel_version) = @_;
-	if ($kernel_version < 2.5) {
-	#- kernel 2.4 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-				if (find {
-					my $s = $ipsec->{$key1}{$_}[0];
-					$s !~ /^#/ && $s =~ m/(^conn|^config|^version)/ &&
-					$section_name eq "$s $ipsec->{$key1}{$_}[1]";	
-				} ikeys %{$ipsec->{$key1}}) {
-					return $key1;
-				}
-		}
-	} else {
-	#- kernel 2.6 part -------------------------------
-		foreach my $key1 (ikeys %$ipsec) {
-			if (find {
-				my $s = "$ipsec->{$key1}{src_range} $ipsec->{$key1}{dst_range}";
-				$s !~ /^#/ && $ipsec->{$key1}{src_range} &&
-				$section_name eq $s;
-			} ikeys %{$ipsec->{$key1}}) {
-				return $key1;
-			}
-		}
-	}
-}
-1
diff --git a/perl-install/network/isdn.pm b/perl-install/network/isdn.pm
deleted file mode 100644
index a7dcaa77f..000000000
--- a/perl-install/network/isdn.pm
+++ /dev/null
@@ -1,200 +0,0 @@
-package network::isdn; # $Id$
-
-use strict;
-use network::isdn_consts;
-use common;
-use any;
-use modules;
-use run_program;
-use log;
-use network::tools;
-use MDK::Common::Globals "network", qw($in);
-use MDK::Common::File;
-use services;
-
-
-sub write_config {
-    my ($isdn) = @_;
-    $in->do_pkgs->install('isdn4net', if_($isdn->{speed} =~ /128/, 'ibod'), 'isdn4k-utils');
-
-    output_with_perm("$::prefix/etc/isdn/profile/link/myisp", 0600,
-	  qq(
-I4L_USERNAME="$isdn->{login}"
-I4L_SYSNAME=""
-I4L_LOCALMSN="$isdn->{phone_in}"
-I4L_REMOTE_OUT="$isdn->{phone_out}"
-I4L_DIALMODE="$isdn->{dialing_mode}"
-) . if_($isdn->{speed} =~ /128/, 'SLAVE="ippp1"
-'));
-	output "$::prefix/etc/isdn/profile/card/mycard",
-	  qq(
-I4L_MODULE="$isdn->{driver}"
-I4L_TYPE="$isdn->{type}"
-I4L_IRQ="$isdn->{irq}"
-I4L_MEMBASE="$isdn->{mem}"
-I4L_PORT="$isdn->{io}"
-I4L_IO0="$isdn->{io0}"
-I4L_IO1="$isdn->{io1}"
-I4L_ID="HiSax"
-I4L_FIRMWARE="$isdn->{firmware}"
-I4L_PROTOCOL="$isdn->{protocol}"
-);
-
-	output "$::prefix/etc/ppp/ioptions",
-	  "lock
-usepeerdns
-defaultroute
-";
-
-    services::stop("isdn4linux"); #- to be stopped before capi is loaded
-    if ($isdn->{driver} eq "capidrv") {
-        setup_capi_conf(get_capi_card($isdn));
-        services::start_service_on_boot("capi4linux");
-        services::start("capi4linux");
-    } else {
-        services::stop("capi4linux");
-        services::do_not_start_service_on_boot("capi4linux");
-    }
-    services::start_service_on_boot("isdn4linux");
-    services::start("isdn4linux");
-
-    write_secret_backend($isdn->{login}, $isdn->{passwd});
-
-    1;
-}
-
-
-sub setup_capi_conf {
-    my ($capi_card) = @_;
-
-    $in->do_pkgs->ensure_is_installed('isdn4k-utils', "/etc/rc.d/init.d/capi4linux"); #- capi4linux service
-    is_module_installed($capi_card->{driver}) or $in->do_pkgs->install(@{$capi_card->{packages}});
-    if ($capi_card->{firmware} && ! -f "$::prefix/usr/lib/isdn/$capi_card->{firmware}") {
-        $in->do_pkgs->install("$capi_card->{driver}-firmware");
-    }
-
-    #- stop capi4linux before new config is written so that it can unload the driver
-    services::stop("capi4linux");
-
-    my $capi_conf;
-    my $firmware = $capi_card->{firmware} || '-';
-    if ($capi_card->{driver} eq "fcclassic") {
-        $capi_conf = "fcclassic     -       -       0x300   5    -       -\n# adjust IRQ and IO !!        ^^^^^  ^^^\n";
-    } elsif ($capi_card->{driver} eq "fcpnp") {
-        $capi_conf = "fcpnp      -       -       0x300   5    -       -\n# adjust IRQ and IO !!     ^^^^^  ^^^\n";
-    } else {
-        $capi_conf = "$capi_card->{driver}        $firmware       -       -       -       -       -\n";
-    }
-    output("$::prefix/etc/capi.conf", $capi_conf);
-}
-
-sub read_config {
-    my ($isdn) = @_;
-    
-    my %match = (I4L_USERNAME => 'login',
-		 I4L_LOCALMSN => 'phone_in',
-		 I4L_REMOTE_OUT => 'phone_out',
-		 I4L_DIALMODE => 'dialing_mode',
-		 I4L_MODULE => 'driver',
-		 I4L_TYPE => 'type',
-		 I4L_IRQ => 'irq',
-		 I4L_MEMBASE => 'mem',
-		 I4L_PORT => 'io',
-		 I4L_IO0 => 'io0',
-		 I4L_IO1 => 'io1',
-		 I4L_FIRMWARE => 'firmware');
-    foreach ('link/myisp', 'card/mycard') {
-	my %conf = getVarsFromSh("$::prefix/etc/isdn/profile/$_");
-	foreach (keys %conf) {	 
-	    $isdn->{$match{$_}} = $conf{$_} if $match{$_} && $conf{$_};
-	}
-    }
-
-    $isdn->{passwd} = network::tools::passwd_by_login($isdn->{login});
-    #$isdn->{description} = '';
-    #$isdn->{vendor} = '';
-    #$isdn->{passwd2} = '';
-}
-
-my $file = "$ENV{SHARE_PATH}/ldetect-lst/isdn.db";
-$file = "$::prefix$file" if !-e $file;
-
-sub get_info_providers_backend {
-    my ($isdn, $_netc, $name) = @_;
-    $name eq N("Unlisted - edit manually") and return;
-    foreach (catMaybeCompressed($file)) {
-	chop;
-	my ($name_, $phone, $real, $dns1, $dns2) = split '=>';
-	if ($name eq $name_) {
-	    @$isdn{qw(user_name phone_out DOMAINNAME2 dnsServer3 dnsServer2)} =
-	               ((split(/\|/, $name_))[2], $phone, $real, $dns1, $dns2);
-	}
-    }
-}
-
-sub read_providers_backend() { map { /(.*?)=>/ } catMaybeCompressed($file) }
-
-
-sub detect_backend {
-    my ($modules_conf) = @_;
-    my @isdn;
-    require detect_devices;
-     each_index {
- 	my $c = $_;
- 	my $isdn = { map { $_ => $c->{$_} } qw(description vendor id driver card_type type) };
-        $isdn->{intf_id} = $::i;
-	$isdn->{$_} = sprintf("%0x", $isdn->{$_}) foreach 'vendor', 'id';
-	$isdn->{card_type} = $c->{bus} eq 'USB' ? 'usb' : 'pci';
-        $isdn->{description} =~ s/.*\|//;
-#	$c->{options} !~ /id=HiSax/ && $isdn->{driver} eq "hisax" and $c->{options} .= " id=HiSax";
-	if ($c->{options} !~ /protocol=/ && $isdn->{protocol} =~ /\d/) {
-	    $modules_conf->set_options($c->{driver}, $c->{options} . " protocol=" . $isdn->{protocol});
-	}
-	$c->{options} =~ /protocol=(\d)/ and $isdn->{protocol} = $1;
-	push @isdn, $isdn;
-    } modules::probe_category('network/isdn');
-    \@isdn;
-}
-
-sub get_cards_by_type {
-    my ($isdn_type) = @_;
-    grep { $_->{card} eq $isdn_type } @isdndata;
-}
-
-
-sub get_cards() {
-    my %buses = (
-                 isa => N("ISA / PCMCIA") . "/" . N("I do not know"),
-                 pci => N("PCI"),
-                 usb => N("USB"),
-                );
-    # pmcia alias (we should really split up pcmcia from isa in isdn db): 
-    $buses{pcmcia} = $buses{isa};
-
-    map { $buses{$_->{card}} . "|" . $_->{description} => $_ } @isdndata;
-}
-
-
-sub is_module_installed {
-    my ($driver) = @_;
-    find { m!/\Q$driver\E\.k?o! } cat_($::prefix . '/lib/modules/' . c::kernel_version() . '/modules.dep');
-}
-
-
-sub get_capi_card {
-    my ($isdn) = @_;
-
-    my $capi_card = find { 
-        hex($isdn->{vendor}) == $_->{vendor} && hex($isdn->{id}) == $_->{id};
-    } @isdn_capi or return;
-
-    #- check if the capi driver is available
-    unless (is_module_installed($capi_card->{driver}) || ($capi_card->{packages} = $in->do_pkgs->check_kernel_module_packages("$capi_card->{driver}-kernel"))) {
-        log::explanations("a capi driver ($capi_card->{driver}) exists to replace $isdn->{driver}, but it is not installed and no packages provide it");
-        return;
-    }
-
-    $capi_card;
-}
-
-1;
diff --git a/perl-install/network/isdn_consts.pm b/perl-install/network/isdn_consts.pm
deleted file mode 100644
index a828a9385..000000000
--- a/perl-install/network/isdn_consts.pm
+++ /dev/null
@@ -1,452 +0,0 @@
-package network::isdn_consts; # $Id$
-use vars qw(@ISA @EXPORT);
-@ISA = qw(Exporter);
-@EXPORT = qw(@isdndata @isdn_capi);
-
-our @isdndata =
-  (
-   { description => "Teles|16.0",               #1 irq, mem, io
-    driver => 'hisax',
-    type => '1',
-    irq => '5',
-    mem => '0xd000',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "Teles|8.0", #2 irq, mem
-    driver => 'hisax',
-    type => '2',
-    irq => '9',
-    mem => '0xd800',
-    card => 'isa',
-   },
-   { description => "Teles|16.3 (ISA non PnP)", #3 irq, io
-    driver => 'hisax',
-    type => '3',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "Teles|16.3c (ISA PnP)", #14 irq, io
-    driver => 'hisax',
-    type => '14',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "Creatix/Teles|Generic (ISA PnP)",	#4 irq, io0 (ISAC), io1 (HSCX)
-    driver => 'hisax',
-    type => '4',
-    irq => '5',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   { description => "Teles|generic", #21 no parameter
-    driver => 'hisax',
-    type => '21',
-    card => 'pci',
-   },
-   { description => "Teles|16.3 (PCMCIA)",	#8 irq, io
-    driver => 'hisax',
-    type => '8',
-    irq => '',
-    io => '0x',
-    card => 'isa',
-   },
-   { description => "Teles|S0Box", #25 irq, io (of the used lpt port)
-    driver => 'hisax',
-    type => '25',
-    irq => '7',
-    io => '0x378',
-    card => 'isa',
-   },
-   { description => "ELSA|PCC/PCF cards", #6 io or nothing for autodetect (the io is required only if you have n>1 ELSA|card)
-    driver => 'hisax',
-    type => '6',
-    io => "",
-    card => 'isa',
-   },
-   { description => "ELSA|Quickstep 1000", #7 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '7',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   { description => "ELSA|Quickstep 1000", #18 no parameter
-    driver => 'hisax',
-    type => '18',
-    card => 'pci',
-   },
-   { description => "ELSA|Quickstep 3000", #18 no parameter
-    driver => 'hisax',
-    type => '18',
-    card => 'pci',
-   },
-   { description => "ELSA|generic (PCMCIA)", #10 irq, io  (set with card manager)
-    driver => 'hisax',
-    type => '10',
-    irq => '',
-    io => '0x',
-    card => 'isa',
-   },
-   { description => "ELSA|MicroLink (PCMCIA)", #10 irq, io  (set with card manager)
-    driver => 'elsa_cs',
-    card => 'isa',
-   },
-   { description => "ITK|ix1-micro Rev.2", #9 irq, io
-    driver => 'hisax',
-    type => '9',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "Eicon.Diehl|Diva (ISA PnP)", #11 irq, io
-    driver => 'hisax',
-    type => '11',
-    irq => '9',
-    io => '0x180',
-    card => 'isa',
-   },
-   { description => "Eicon.Diehl|Diva 20", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   { description => "Eicon.Diehl|Diva 20PRO", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   { description => "Eicon.Diehl|Diva 20_U", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   { description => "Eicon.Diehl|Diva 20PRO_U", #11 no parameter
-    driver => 'hisax',
-    type => '11',
-    card => 'pci',
-   },
-   { description => "ASUS|COM ISDNLink", #12 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '12',
-    irq => '5',
-    io => '0x200',
-    card => 'isa',
-   },
-   { description => "ASUS|COM ISDNLink",
-    driver => 'hisax',
-    type => '35',
-    card => 'pci',
-   },
-   { description => "DynaLink|Any",
-    driver => 'hisax',
-    type => '12',
-    card => 'pci',
-   },
-   { description => "DynaLink|IS64PH, ASUSCOM", #36
-    driver => 'hisax',
-    type => '36',
-    card => 'pci',
-   },
-   { description => "HFC|2BS0 based cards", #13 irq, io
-    driver => 'hisax',
-    type => '13',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "HFC|2BDS0", #35 none
-    driver => 'hisax',
-    type => '35',
-    card => 'pci',
-   },
-   { description => "HFC|2BDS0 S+, SP (PCMCIA)", #37 irq,io (pcmcia must be set with cardmgr)
-    driver => 'hisax',
-    type => '37',
-    card => 'isa',
-   },
-   { description => "Sedlbauer|Speed Card", #15 irq, io
-    driver => 'hisax',
-    type => '15',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "Sedlbauer|PC/104", #15 irq, io
-    driver => 'hisax',
-    type => '15',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "Sedlbauer|Speed Card", #15 no parameter
-    driver => 'hisax',
-    type => '15',
-    card => 'pci',
-   },
-   { description => "Sedlbauer|Speed Star (PCMCIA)", #22 irq, io (set with card manager)
-    driver => 'sedlbauer_cs',
-    card => 'isa',
-   },
-   { description => "Sedlbauer|Speed Fax+ (ISA Pnp)", #28 irq, io (from isapnp setup)
-    driver => 'hisax',
-    type => '28',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-    firmware => '/usr/lib/isdn/ISAR.BIN',
-   },
-   { description => "Sedlbauer|Speed Fax+", #28 no parameter
-    driver => 'hisax',
-    type => '28',
-    card => 'pci',
-    firmware => '/usr/lib/isdn/ISAR.BIN',
-   },
-   { description => "USR|Sportster internal", #16 irq, io
-    driver => 'hisax',
-    type => '16',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "Generic|MIC card",	#17 irq, io
-    driver => 'hisax',
-    type => '17',
-    irq => '9',
-    io => '0xd80',
-    card => 'isa',
-   },
-   { description => "Compaq|ISDN S0 card", #19 irq, io0, io1, io (from isapnp setup io=IO2)
-    driver => 'hisax',
-    type => '19',
-    irq => '5',
-    io => '0x0000',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   { description => "Generic|NETjet card", #20 no parameter
-    driver => 'hisax',
-    type => '20',
-    card => 'pci',
-   },
-   { description => "Dr. Neuhaus|Niccy (ISA PnP)", #24 irq, io0, io1 (from isapnp setup)
-    driver => 'hisax',
-    type => '24',
-    irq => '5',
-    io0 => '0x0000',
-    io1 => '0x0000',
-    card => 'isa',
-   },
-   { description => "Dr. Neuhaus|Niccy", ##24 no parameter
-    driver => 'hisax',
-    type => '24',
-    card => 'pci',
-   },
-   { description => "AVM|A1 (Fritz) (ISA non PnP)", #5 irq, io
-    driver => 'hisax',
-    type => '5',
-    irq => '10',
-    io => '0x300',
-    card => 'isa',
-   },
-   { description => "AVM|ISA Pnp generic", #27 irq, io  (from isapnp setup)
-    driver => 'hisax',
-    type => '27',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   { description => "AVM|A1 (Fritz) (PCMCIA)", #26 irq, io (set with card manager)
-    driver => 'hisax',
-    type => '26',
-    irq => '',
-    card => 'isa',
-   },
-   { description => "AVM|PCI (Fritz!)", #27 no parameter
-    driver => 'hisax',
-    type => '27',
-    card => 'pci',
-   },
-   { description => "AVM|B1",
-    driver => 'b1pci',
-    card => 'pci',
-   },
-   { description => "Siemens|I-Surf 1.0 (ISA Pnp)", #29 irq, io, memory (from isapnp setup)   
-    driver => 'hisax',
-    type => '29',
-    irq => '9',
-    io => '0xd80',
-    mem => '0xd000',
-    card => 'isa',
-   },
-   { description => "ACER|P10 (ISA Pnp)",	#30 irq, io (from isapnp setup)   
-    driver => 'hisax',
-    type => '30',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   { description => "HST|Saphir (ISA Pnp)", #31 irq, io
-    driver => 'hisax',
-    type => '31',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   { description => "Telekom|A4T", #32 none
-    driver => 'hisax',
-    type => '32',
-    card => 'pci',
-   },
-   { description => "Scitel|Quadro", #33 subcontroller (4*S0, subctrl 1...4)
-    driver => 'hisax',
-    type => '33',
-    card => 'pci',
-   },
-   { description => "Gazel|ISDN cards", #34 irq,io
-    driver => 'hisax',
-    type => '34',
-    irq => '5',
-    io => '0x300',
-    card => 'isa',
-   },
-   { description => "Gazel|Gazel ISDN cards", #34 none
-    driver => 'hisax',
-    type => '34',
-    card => 'pci',
-   },
-   { description => "Winbond|W6692 and Winbond based cards", #36 none
-    driver => 'hisax',
-    type => '36',
-    card => 'pci',
-   },
-   { description => "BeWAN|R834",
-    driver => 'hisax_st5481',
-    type => '99',
-    card => 'usb',
-   },
-   { description => "Gazel|128",
-    driver => 'hisax_st5481',
-    type => '99',
-    card => 'usb',
-   },
-  );
-
-#- cards than can be used with capi drivers
-our @isdn_capi =
-  (
-   {
-    vendor => 0x1131,
-    id => 0x5402,
-    description => 'AVM Audiovisuelles|Fritz DSL ISDN/DSL Adapter',
-    bus => 'PCI',
-    driver => 'fcdsl',
-    firmware => 'fdslbase.bin'
-   },
-   {
-    vendor => 0x1244,
-    id => 0x0a00,
-    description => 'AVM Audiovisuelles|A1 ISDN Adapter [Fritz] CAPI',
-    bus => 'PCI',
-    driver => 'fcpci'
-   },
-   {
-    vendor => 0x1244,
-    id => 0x0e00,
-    description => 'AVM Audiovisuelles|A1 ISDN Adapter [Fritz] CAPI',
-    bus => 'PCI',
-    driver => 'fcpci'
-   },
-   {
-    vendor => 0x1244,
-    id => 0x0f00,
-    description => 'AVM Audiovisuelles|Fritz DSL ISDN/DSL Adapter',
-    bus => 'PCI',
-    driver => 'fcdsl',
-    firmware => 'fdslbase.bin'
-   },
-   {
-    vendor => 0x1244,
-    id => 0x2700,
-    description => 'AVM Audiovisuelles|Fritz!Card DSL SL',
-    bus => 'PCI',
-    driver => 'fcdslsl',
-    firmware => 'fdssbase.bin'
-   },
-   {
-    vendor => 0x1244,
-    id => 0x2900,
-    description => 'AVM Audiovisuelles|Fritz DSL Ver. 2.0',
-    bus => 'PCI',
-    driver => 'fcdsl2',
-    firmware => 'fds2base.bin'
-   },
-   {
-    vendor => 0x057c,
-    id => 0x0c00,
-    description => 'AVM GmbH|FritzCard USB ISDN TA',
-    bus => 'USB',
-    driver => 'fcusb'
-   },
-   {
-    vendor => 0x057c,
-    id => 0x1000,
-    description => 'AVM GmbH|FritzCard USB 2 Ver. 2.0 ISDN TA',
-    bus => 'USB',
-    driver => 'fcusb2',
-    firmware => 'fus2base.frm'
-   },
-   {
-    vendor => 0x057c,
-    id => 0x1900,
-    description => 'AVM GmbH|FritzCard USB 2 Ver. 3.0 ISDN TA',
-    bus => 'USB',
-    driver => 'fcusb2',
-    firmware => 'fus3base.frm'
-   },
-   {
-    vendor => 0x057c,
-    id => 0x2000,
-    description => 'AVM GmbH|Fritz X USB ISDN TA',
-    bus => 'USB',
-    driver => 'fxusb'
-   },
-   {
-    vendor => 0x057c,
-    id => 0x2300,
-    description => 'AVM GmbH|FtitzCard USB DSL ISDN TA/ DSL Modem',
-    bus => 'USB',
-    driver => 'fcdslusb',
-    firmware => 'fdsubase.frm'
-   },
-   {
-    vendor => 0x057c,
-    id => 0x2800,
-    description => 'AVM GmbH|Fritz X USB OEM ISDN TA',
-    bus => 'USB',
-    driver => 'fxusb_CZ'
-   },
-   {
-    vendor => 0x057c,
-    id => 0x3000,
-    description => 'AVM GmbH|FtitzCard USB DSL SL USB',
-    bus => 'USB',
-    driver => 'fcdslusba',
-    firmware => 'fdlabase.frm'
-   },
-   {
-    vendor => 0x057c,
-    id => 0x3500,
-    description => 'AVM GmbH|FtitzCard USB DSL SL USB Analog',
-    bus => 'USB',
-    driver => 'fcdslslusb',
-    firmware => 'fdlubase.frm',
-   },
-  );
-
-
-1;
diff --git a/perl-install/network/modem.pm b/perl-install/network/modem.pm
deleted file mode 100644
index 6359069eb..000000000
--- a/perl-install/network/modem.pm
+++ /dev/null
@@ -1,243 +0,0 @@
-package network::modem;	# $Id$
-
-use strict;
-use common;
-use any;
-use modules;
-use detect_devices;
-use mouse;
-use network::tools;
-
-sub first_modem {
-    my ($netc) = @_;
-    return "/mnt/root" if $::isInstall;
-    first(grep { $_->{device} =~ m!^/dev! } values %{$netc->{autodetect}{modem}});
-}
-
-sub get_user_home() {
-    my $home;
-    if ($ENV{USER} ne "root") {
-        #- kdesu case
-        my $user = find { $_->[0] eq $ENV{USER} } list_passwd();
-        $home = $user->[7] if $user;
-    }
-    $home ||= $ENV{HOME}; #- consolehelper case
-    $home;
-}
-
-sub ppp_read_conf {
-    my ($netcnx, $netc) = @_;
-    my $modem = $netcnx->{$netcnx->{type}} ||= {};
-    if (my $detected_modem = first_modem($netc)) {
-        $modem->{device} ||= $detected_modem->{device};
-    }
-    $modem->{device} ||= '/dev/modem';
-    my %l = getVarsFromSh(get_user_home() . "/.kde/share/config/kppprc");
-    add2hash(\%l, getVarsFromSh("$::prefix/usr/share/config/kppprc"));
-    $l{Authentication} = 4 if $l{Authentication} !~ /\d/;
-    $modem->{$_} ||= $l{$_} foreach qw(Authentication Gateway IPAddr SubnetMask);
-    $modem->{connection} ||= $l{Name};
-    $modem->{domain} ||= $l{Domain};
-    ($modem->{dns1}, $modem->{dns2}) = split(',', $l{DNS});
-    
-    foreach (cat_("/etc/sysconfig/network-scripts/chat-ppp0")) {
-        /.*ATDT([\d#*]*)/ and $modem->{phone} ||= $1;
-    }
-    foreach (cat_("/etc/sysconfig/network-scripts/ifcfg-ppp0")) {
-        /NAME=(['"]?)(.*)\1/ and $modem->{login} ||= $2;
-        /^METRIC=(.*)/ and $modem->{METRIC} = $1;
-    }
-    $modem->{login} ||= $l{Username};
-    my $secret = network::tools::read_secret_backend();
-    foreach (@$secret) {
-        $modem->{passwd} ||= $_->{passwd} if $_->{login} eq $modem->{login};
-    }
-    #my $secret = network::tools::read_secret_backend();
-    #my @cnx_list = map { $_->{server} } @$secret;
-    $modem->{$_} ||= '' foreach qw(connection phone login passwd auth domain dns1 dns2);
-    $modem->{auto_gateway} ||= defined $modem->{Gateway} && $modem->{Gateway} ne '0.0.0.0' ? N("Manual") : N("Automatic");
-    $modem->{auto_ip} ||=  defined $modem->{IPAddr} && $modem->{IPAddr} ne '0.0.0.0' ? N("Manual") : N("Automatic");
-    $modem->{auto_dns} ||= $modem->{dns1} || $modem->{dns2} ? N("Manual") : N("Automatic");
-
-    $modem;
-}
-
-#-----modem conf
-sub ppp_configure {
-    my ($in, $modem) = @_;
-    $modem or return;
-    $in->do_pkgs->install('ppp') if !$::testing;
-    $in->do_pkgs->install('kdenetwork-kppp') if !$::testing && $in->do_pkgs->is_installed('kdebase');
-
-    if ($modem->{device} ne "/dev/modem") {
-        my $dev = $modem->{device};
-        $dev =~ s!^/dev/!!;
-        any::devfssymlinkf({ device => $dev }, 'modem');
-        #- add a specific udev script in addition to the udev rules file
-        #- (ttySL0 is a symlink, udev will not be called when it's created)
-        my $udev_conf = "$::prefix/etc/udev/conf.d/modem.conf";
-        output_p($udev_conf, "ln -sf $dev /dev/modem\n");
-        chmod 0755, $udev_conf;
-    }
-
-    my %toreplace = map { $_ => $modem->{$_} } qw(Authentication AutoName connection dns1 dns2 domain IPAddr login passwd phone SubnetMask);
-    $toreplace{phone} =~ s/[^\d#*]//g;
-    if ($modem->{auto_dns} ne N("Automatic")) {
-        $toreplace{dnsserver} = join ',', map { $modem->{$_} } "dns1", "dns2";
-        $toreplace{dnsserver} .= $toreplace{dnsserver} && ',';
-    }
-
-    #- using peerdns or dns1,dns2 avoid writing a /etc/resolv.conf file.
-    $toreplace{peerdns} = "yes";
-
-    $toreplace{connection} ||= 'DialupConnection';
-    $toreplace{domain} ||= 'localdomain';
-    $toreplace{intf} ||= 'ppp0';
-    $toreplace{papname} = $toreplace{login} if member($modem->{Authentication}, 1, 3, 4);
-
-    # handle static/dynamic settings:
-    if ($modem->{auto_ip} eq N("Automatic")) {
-        $toreplace{$_} = '0.0.0.0' foreach qw(IPAddr SubnetMask);
-    } else {
-        $toreplace{$_} = $modem->{$_} foreach qw(IPAddr SubnetMask);
-    }
-    $toreplace{Gateway} = $modem->{auto_gateway} eq N("Automatic") ? '0.0.0.0' : $modem->{Gateway};
-
-    $toreplace{METRIC} = defined($modem->{METRIC}) ? $modem->{METRIC} : network::tools::get_default_metric("modem");
-
-    #- build ifcfg-ppp0.
-    my $various = <<END;
-DEVICE="$toreplace{intf}"
-ONBOOT="no"
-USERCTL="no"
-MODEMPORT="/dev/modem"
-LINESPEED="115200"
-PERSIST="yes"
-DEFABORT="yes"
-DEBUG="yes"
-INITSTRING="ATZ"
-DEFROUTE="yes"
-HARDFLOWCTL="yes"
-ESCAPECHARS="no"
-PPPOPTIONS=""
-PAPNAME="$toreplace{papname}"
-REMIP=""
-NETMASK=""
-IPADDR=""
-MRU=""
-MTU=""
-DISCONNECTTIMEOUT="5"
-RETRYTIMEOUT="60"
-BOOTPROTO="none"
-PEERDNS="$toreplace{peerdns}"
-METRIC=$toreplace{METRIC}
-END
-    output("$::prefix/etc/sysconfig/network-scripts/ifcfg-ppp0", 
-	   $various,
-           if_($modem->{auto_dns} ne N("Automatic"), map { qq(DNS$_=$toreplace{"dns$_"}\n) } grep { $toreplace{"dns$_"} } 1..2));
-
-    #- build chat-ppp0.
-    my @chat = <<END;
-'ABORT' 'BUSY'
-'ABORT' 'ERROR'
-'ABORT' 'NO CARRIER'
-'ABORT' 'NO DIALTONE'
-'ABORT' 'Invalid Login'
-'ABORT' 'Login incorrect'
-'' 'ATZ'
-END
-    if ($modem->{special_command}) {
-	push @chat, <<END;
-'OK' '$modem->{special_command}'
-END
-    }
-    push @chat, <<END;
-'OK' 'ATDT$toreplace{phone}'
-'TIMEOUT' '120'
-'CONNECT' ''
-END
-    if (member($modem->{Authentication}, 0, 2)) {
-	push @chat, <<END;
-'ogin:--ogin:' '$toreplace{login}'
-'ord:' '$toreplace{passwd}'
-END
-    }
-    push @chat, <<END;
-'TIMEOUT' '5'
-'~--' ''
-END
-    my $chat_file = "$::prefix/etc/sysconfig/network-scripts/chat-ppp0";
-    output_with_perm($chat_file, 0600, @chat);
-
-    write_secret_backend($toreplace{login}, $toreplace{passwd});
-
-    #- install kppprc file according to used configuration.
-    mkdir_p("$::prefix/usr/share/config");
-
-    $toreplace{$_->[0]} = $modem->{$_->[0]} || $_->[1] foreach [ 'Timeout', 60 ], [ 'UseLockFile', 1 ], [ 'Enter', 'CR' ], [ 'Volume', 0 ],
-                                                               [ 'BusyWait', 0 ], [ 'FlowControl', 'CRTSCTS' ], [ 'Speed', 115200 ];
-    output($modem->{kppprc} || "$::prefix/usr/share/config/kppprc", c::to_utf8(<<END));
-# KDE Config File
-
-[Account0]
-ExDNSDisabled=0
-AutoName=$toreplace{AutoName}
-ScriptArguments=
-AccountingEnabled=0
-DialString=ATDT
-Phonenumber=$toreplace{phone}
-IPAddr=$toreplace{IPAddr}
-Domain=$toreplace{domain}
-Name=$toreplace{connection}
-VolumeAccountingEnabled=0
-pppdArguments=
-Password=$toreplace{passwd}
-BeforeDisconnect=
-Command=
-ScriptCommands=
-Authentication=$toreplace{Authentication}
-DNS=$toreplace{dnsserver}
-SubnetMask=$toreplace{SubnetMask}
-AccountingFile=
-DefaultRoute=1
-Username=$toreplace{login}
-Gateway=$toreplace{Gateway}
-StorePassword=1
-DisconnectCommand=
-
-[Modem]
-BusyWait=$toreplace{BusyWait}
-Enter=$toreplace{Enter}
-FlowControl=$toreplace{FlowControl}
-Volume=$toreplace{Volume}
-Timeout=$toreplace{Timeout}
-UseCDLine=0
-UseLockFile=$toreplace{UseLockFile}
-Device=/dev/modem
-Speed=$toreplace{Speed}
-
-[Graph]
-InBytes=0,0,255
-Text=0,0,0
-Background=255,255,255
-Enabled=true
-OutBytes=255,0,0
-
-[General]
-QuitOnDisconnect=0
-ShowLogWindow=0
-DisconnectOnXServerExit=1
-DefaultAccount=$toreplace{connection}
-iconifyOnConnect=1
-Hint_QuickHelp=0
-AutomaticRedial=0
-PPPDebug=0
-NumberOfAccounts=1
-ShowClock=1
-DockIntoPanel=0
-pppdTimeout=30
-END
-    network::network::proxy_configure($::o->{miscellaneous});
-}
-
-1;
diff --git a/perl-install/network/ndiswrapper.pm b/perl-install/network/ndiswrapper.pm
deleted file mode 100644
index 8bbc731c9..000000000
--- a/perl-install/network/ndiswrapper.pm
+++ /dev/null
@@ -1,108 +0,0 @@
-package network::ndiswrapper;
-
-use strict;
-use common;
-use modules;
-use detect_devices;
-
-my $ndiswrapper_prefix = "$::prefix/etc/ndiswrapper";
-
-sub installed_drivers() {
-    grep { -d "$ndiswrapper_prefix/$_" } all($ndiswrapper_prefix);
-}
-
-sub present_devices {
-    my ($driver) = @_;
-    my @supported_devices;
-    foreach (all("$ndiswrapper_prefix/$driver")) {
-        my ($ids) = /^([0-9A-Z]{4}:[0-9A-Z]{4})\.[05]\.conf$/;
-        $ids and push @supported_devices, $ids;
-    }
-    grep { member(uc(sprintf("%04x:%04x", $_->{vendor}, $_->{id})), @supported_devices) } detect_devices::probeall();
-}
-
-sub get_devices {
-    my ($in, $driver) = @_;
-    my @devices = present_devices($driver);
-    @devices or $in->ask_warn(N("Error"), N("No device supporting the %s ndiswrapper driver is present!", $driver));
-    @devices;
-}
-
-sub ask_driver {
-    my ($in) = @_;
-    if (my $inf_file = $in->ask_file(N("Please select the Windows driver (.inf file)"), "/mnt/cdrom")) {
-        my $driver = basename(lc($inf_file));
-        $driver =~ s/\.inf$//;
-
-        #- first uninstall the driver if present, may solve issues if it is corrupted
-        -d "$ndiswrapper_prefix/$driver" and system('ndiswrapper', '-e', $driver);
-
-        unless (system('ndiswrapper', '-i', $inf_file) == 0) {
-            $in->ask_warn(N("Error"), N("Unable to install the %s ndiswrapper driver!", $driver));
-            return undef;
-        }
-
-        return $driver;
-    }
-    undef;
-}
-
-sub find_matching_devices {
-    my ($device) = @_;
-    my $net_path = '/sys/class/net';
-    my @devices;
-
-    foreach my $interface (all($net_path)) {
-        my $dev_path = "$net_path/$interface/device";
-        -l $dev_path or next;
-        my $is_usb = -f "$dev_path/bInterfaceNumber";
-        my $map = detect_devices::get_sysfs_device_id_map($dev_path);
-        if (every { hex(chomp_(cat_("$dev_path/" . $map->{$_}))) eq $device->{$_} } keys %$map) {
-            my $driver = readlink("$net_path/$interface/driver");
-            $driver =~ s!.*/!!;
-            push @devices, [ $interface, $driver ];
-        }
-    }
-
-    @devices;
-}
-
-sub find_conflicting_devices {
-    my ($device) = @_;
-    grep { $_->[1] ne "ndiswrapper" } find_matching_devices($device);
-}
-
-sub find_interface {
-    my ($device) = @_;
-    my $dev = find { $_->[1] eq "ndiswrapper" } find_matching_devices($device);
-    $dev->[0];
-}
-
-sub setup_device {
-    my ($in, $device) = @_;
-
-    #- unload ndiswrapper first so that the newly installed .inf files will be read
-    eval { modules::unload("ndiswrapper") };
-    eval { modules::load("ndiswrapper") };
-
-    if ($@) {
-        $in->ask_warn(N("Error"), N("Unable to load the ndiswrapper module!"));
-        return;
-    }
-
-    my @conflicts = find_conflicting_devices($device);
-    if (@conflicts) {
-        $in->ask_yesorno(N("Warning"), N("The selected device has already been configured with the %s driver.
-Do you really want to use a ndiswrapper driver ?", $conflicts[0][1])) or return;
-    }
-
-    my $interface = find_interface($device);
-    unless ($interface) {
-        $in->ask_warn(N("Error"), N("Unable to find the ndiswrapper interface!"));
-        return;
-    }
-
-    $interface;
-}
-
-1;
diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
deleted file mode 100644
index d50b51453..000000000
--- a/perl-install/network/netconnect.pm
+++ /dev/null
@@ -1,1700 +0,0 @@
-package network::netconnect; # $Id$
-
-use strict;
-use common;
-use log;
-use detect_devices;
-use list_modules;
-use run_program;
-use modules;
-use any;
-use fs;
-use mouse;
-use network::network;
-use network::tools;
-use MDK::Common::Globals "network", qw($in);
-
-sub detect {
-    my ($modules_conf, $auto_detect, $o_class) = @_;
-    my %l = (
-             isdn => sub {
-                 require network::isdn;
-                 $auto_detect->{isdn} = network::isdn::detect_backend($modules_conf);
-             },
-             lan => sub { # ethernet
-                 require network::ethernet;
-                 modules::load_category($modules_conf, list_modules::ethernet_categories());
-                 $auto_detect->{lan} = { map { $_->[0] => $_->[1] } network::ethernet::get_eth_cards($modules_conf) };
-             },
-             adsl => sub {
-                 require network::adsl;
-                 $auto_detect->{adsl} = network::adsl::adsl_detect();
-             },
-             modem => sub {
-                 $auto_detect->{modem} = { map { $_->{description} || "$_->{MANUFACTURER}|$_->{DESCRIPTION} ($_->{device})" => $_ } detect_devices::getModem($modules_conf) };
-             },
-            );
-    $l{$_}->() foreach $o_class || keys %l;
-    return;
-}
-
-sub init_globals {
-    my ($in) = @_;
-    MDK::Common::Globals::init(in => $in);
-}
-
-sub detect_timezone() {
-    my %tmz2country = ( 
-		       'Europe/Paris' => N("France"),
-		       'Europe/Amsterdam' => N("Netherlands"),
-		       'Europe/Rome' => N("Italy"),
-		       'Europe/Brussels' => N("Belgium"),
-		       'America/New_York' => N("United States"),
-		       'Europe/London' => N("United Kingdom")
-		      );
-    my %tm_parse = MDK::Common::System::getVarsFromSh("$::prefix/etc/sysconfig/clock");
-    my @country;
-    foreach (keys %tmz2country) {
-	if ($_ eq $tm_parse{ZONE}) {
-	    unshift @country, $tmz2country{$_};
-	} else { push @country, $tmz2country{$_} }
-    }
-    \@country;
-}
-
-# load sub category's wizard pages into main wizard data structure
-sub get_subwizard {
-    my ($wiz, $type) = @_;
-    my %net_conf_callbacks = (adsl => sub { require network::adsl; &network::adsl::get_wizard },
-                              #cable => sub { require network::ethernet; &network::ethernet::get_wizard },
-                              #isdn => sub { require network::isdn; &network::isdn::get_wizard },
-                              #lan => sub { require network::ethernet; &network::ethernet::get_wizard },
-                              #modem => sub { require network::modem; &network::modem::get_wizard },
-                             );
-    $net_conf_callbacks{$type}->($wiz);
-}
-
-# configuring all network devices
-sub real_main {
-      my ($netcnx, $in, $modules_conf, $o_netc, $o_mouse, $o_intf, $o_first_time, $o_noauto) = @_;
-      my $netc  = $o_netc  ||= {};
-      my $mouse = $o_mouse ||= {};
-      my $intf  = $o_intf  ||= {};
-      my $first_time = $o_first_time || 0;
-      my ($network_configured, $cnx_type, $type, @all_cards, %eth_intf, %all_eth_intf);
-      my (%connections, @connection_list);
-      my ($modem, $modem_name, $modem_conf_read, $modem_dyn_dns, $modem_dyn_ip);
-      my $cable_no_auth;
-      my ($adsl_type, @adsl_devices, $adsl_failed, $adsl_answer, %adsl_cards, %adsl_data, $adsl_data, $adsl_provider, $adsl_old_provider, $adsl_vpi, $adsl_vci);
-      my ($ntf_name, $gateway_ex, $up, $need_restart_network);
-      my ($isdn, $isdn_name, $isdn_type, %isdn_cards, @isdn_dial_methods);
-      my $my_isdn = join('', N("Manual choice"), " (", N("Internal ISDN card"), ")");
-      my (@ndiswrapper_drivers, $ndiswrapper_driver, $ndiswrapper_device);
-      my ($is_wireless, $wireless_enc_mode, $wireless_enc_key, $need_rt2x00_iwpriv);
-      my ($dvb_adapter, $dvb_ad, $dvb_net, $dvb_pid);
-      my ($module, $auto_ip, $protocol, $onboot, $needhostname, $peerdns, $peeryp, $peerntpd, $hotplug, $track_network_id); # lan config
-      my $success = 1;
-      my $ethntf = {};
-      my $db_path = "/usr/share/apps/kppp/Provider";
-      my (%countries, @isp, $country, $provider, $old_provider);
-      my $config = {};
-      eval(cat_("$::prefix/etc/sysconfig/drakconnect"));
-
-      my %l10n_lan_protocols = (
-                               static => N("Manual configuration"),
-                               dhcp   => N("Automatic IP (BOOTP/DHCP)"),
-                               if_(0,
-                               dhcp_zeroconf   => N("Automatic IP (BOOTP/DHCP/Zeroconf)"),
-                                  )
-                              );
-      my $_w = N("Protocol for the rest of the world");
-      my %isdn_protocols = (
-                            2 => N("European protocol (EDSS1)"),
-                            3 => N("Protocol for the rest of the world\nNo D-Channel (leased lines)"),
-                           );
-
-      network::tools::remove_initscript();
-
-      init_globals($in);
-
-      read_net_conf($netcnx, $netc, $intf);
-
-      $netc->{autodetect} = {};
-
-      my $lan_detect = sub {
-          detect($modules_conf, $netc->{autodetect}, 'lan');
-          require network::ethernet;
-          modules::interactive::load_category($in, $modules_conf, list_modules::ethernet_categories(), !$::expert, 0);
-          @all_cards = network::ethernet::get_eth_cards($modules_conf);
-          %all_eth_intf = network::ethernet::get_eth_cards_names(@all_cards); #- needed not to loose GATEWAYDEV
-          %eth_intf = map { $_->[0] => join(': ', $_->[0], $_->[2]) }
-            grep { to_bool($is_wireless) == detect_devices::is_wireless_interface($_->[0]) } @all_cards;
-      };
-
-      my $is_dvb_interface = sub { $_[0]{DEVICE} =~ /^dvb\d+_\d+/ };
-
-      my $find_lan_module = sub {
-          if (my $dev = find { $_->{device} eq $ethntf->{DEVICE} } detect_devices::pcmcia_probe()) { # PCMCIA case
-              $module = $dev->{driver};
-          } elsif ($dev = find { $_->[0] eq $ethntf->{DEVICE} } @all_cards) {
-              $module = $dev->[1];
-	  } elsif ($is_dvb_interface->($ethntf)) {
-	      $module = $dvb_adapter->{driver};
-          } else { $module = "" }
-      };
-
-      my $is_hotplug_blacklisted = sub {
-          bool2yesno(member($module, qw(b44 forcedeth madwifi_pci via-velocity)) ||
-                     $is_wireless ||
-                     find { $_->{device} eq $ntf_name } detect_devices::pcmcia_probe());
-      };
-
-      my %adsl_descriptions = (
-                          speedtouch => N("Alcatel speedtouch USB modem"),
-                          sagem => N("Sagem USB modem"),
-                          bewan => N("Bewan modem"),
-                          eci       => N("ECI Hi-Focus modem"), # this one needs eci agreement
-                         );
-
-      my %adsl_types = (
-                        dhcp   => N("Dynamic Host Configuration Protocol (DHCP)"),
-                        manual => N("Manual TCP/IP configuration"),
-                        pptp  => N("Point to Point Tunneling Protocol (PPTP)"),
-                        pppoe  => N("PPP over Ethernet (PPPoE)"),
-                        pppoa  => N("PPP over ATM (PPPoA)"),
-                        capi  => N("DSL over CAPI"),
-                       );
-
-      my %encapsulations = (
-                            1 => N("Bridged Ethernet LLC"), 
-                            2 => N("Bridged Ethernet VC"), 
-                            3 => N("Routed IP LLC"), 
-                            4 => N("Routed IP VC"),
-                            5 => N("PPPoA LLC"), 
-                            6 => N("PPPoA VC"),
-                           );
-
-      my %ppp_auth_methods = (
-                              0 => N("Script-based"),
-                              1 => N("PAP"),
-                              2 => N("Terminal-based"),
-                              3 => N("CHAP"),
-                              4 => N("PAP/CHAP"),
-                             );
-
-      my %wireless_enc_modes = (
-                                none => N("None"),
-                                open => N("Open WEP"),
-                                restricted => N("Restricted WEP"),
-                                'wpa-psk' => N("WPA Pre-Shared Key"),
-                               );
-
-      my $offer_to_connect = sub {
-          return "ask_connect_now" if $netc->{internet_cnx_choice} eq 'adsl' && !member($adsl_type, qw(manual dhcp));
-          return "ask_connect_now" if member($netc->{internet_cnx_choice}, qw(modem isdn isdn_external));
-          return "end";
-      };
-
-      my $after_lan_intf_selection = sub { $is_wireless ? 'wireless' : 'lan_protocol' };
-
-      my $after_start_on_boot_step = sub {
-          if ($netc->{internet_cnx_choice} && exists $netc->{internet_cnx}{$netc->{internet_cnx_choice}}) {
-              $netcnx->{type} = $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{type};
-          } else {
-              undef $netc->{NET_DEVICE};
-          }
-          if ($netcnx->{type} eq 'adsl' && member($adsl_type, qw(manual dhcp)) && member($ntf_name, qw(sagem speedtouch))) {
-            #- we may need to write sagem specific parameters and load corresponding modules/programs (sagem/speedtouch)
-            network::adsl::adsl_conf_backend($in, $modules_conf, $netcnx, $netc, $intf, $ntf_name, $adsl_type, $netcnx);
-          }
-          network::network::configureNetwork2($in, $modules_conf, $::prefix, $netc, $intf);
-          $network_configured = 1;
-          return "restart" if $need_restart_network && !$::isInstall && !$::expert;
-          return $offer_to_connect->();
-      };
-
-      my $goto_start_on_boot_ifneeded = sub {
-          return $after_start_on_boot_step->() if $netcnx->{type} eq "lan";
-          return "isdn_dial_on_boot" if  $netcnx->{type} =~ /isdn/;
-          return "network_on_boot";
-      };
-
-      my $save_cnx = sub {
-          if (keys %$config) {
-              require Data::Dumper;
-              output("$::prefix/etc/sysconfig/drakconnect", Data::Dumper->Dump([ $config ], [ '$p' ]));
-          }
-          return "allow_user_ctl";
-      };
-
-      my $handle_multiple_cnx = sub {
-          $need_restart_network = member($netcnx->{type}, qw(cable lan)) || $netcnx->{type} eq 'adsl' && member($adsl_type, qw(manual dhcp));
-          my $nb = keys %{$netc->{internet_cnx}};
-          if (1 < $nb) {
-              return "multiple_internet_cnx";
-          } else {
-              $netc->{internet_cnx_choice} = $nb == 1 ? (keys %{$netc->{internet_cnx}})[0] : $netcnx->{type};
-              return $save_cnx->();
-          }
-      };
-
-      my $delete_gateway_settings = sub {
-          my ($device) = @_;
-          #- delete gateway settings if gateway device is invalid or matches the reconfigured device
-          if (!$netc->{GATEWAYDEV} || !exists $eth_intf{$netc->{GATEWAYDEV}} || $netc->{GATEWAYDEV} eq $device) {
-              delete $netc->{GATEWAY};
-              delete $netc->{GATEWAYDEV};
-          }
-      };
-
-      my $ndiswrapper_do_device_selection = sub {
-          $ntf_name = network::ndiswrapper::setup_device($in, $ndiswrapper_device);
-          unless ($ntf_name) {
-              undef $ndiswrapper_device;
-              return;
-          }
-
-          #- redetect interfaces (so that the ndiswrapper module can be detected)
-          $lan_detect->();
-
-          $ethntf = $intf->{$ntf_name} ||= { DEVICE => $ntf_name };
-
-          1;
-      };
-
-      my $ndiswrapper_do_driver_selection = sub {
-          my @devices = network::ndiswrapper::get_devices($in, $ndiswrapper_driver);
-
-          if (!@devices) {
-              undef $ndiswrapper_driver;
-              return;
-          } elsif (@devices == 1) {
-              #- only one device matches installed driver
-              $ndiswrapper_device = $devices[0];
-              return $ndiswrapper_do_device_selection->();
-          }
-
-          1;
-      };
-
-      my $ndiswrapper_next_step = sub {
-          return $ndiswrapper_device ? $after_lan_intf_selection->() :
-                 $ndiswrapper_driver ? 'ndiswrapper_select_device' :
-                 'ndiswrapper_select_driver';
-      };
-
-      use locale;
-      set_l10n_sort();
-
-      # main wizard:
-      my $wiz;
-      $wiz =
-        {
-         defaultimage => "drakconnect.png",
-         name => N("Network & Internet Configuration"),
-         pages => {
-                   welcome =>
-                   {
-                    pre => sub {
-                        # keep b/c of translations in case they can be reused somewhere else:
-                        my @_a = (N("(detected on port %s)", 'toto'), 
-                          #-PO: here, "(detected)" string will be appended to eg "ADSL connection"
-                          N("(detected %s)", 'toto'), N("(detected)"));
-                        my @connections = (
-                                          [ N("LAN connection"),    "lan"   ],
-                                          [ N("Wireless connection"), "lan" ],
-                                          [ N("ADSL connection"),   "adsl"  ],
-                                          [ N("Cable connection"),  "cable" ],
-                                          [ N("ISDN connection"),   "isdn"  ],
-                                          [ N("Modem connection"),  "modem" ],
-                                          [ N("DVB connection"), "dvb" ],
-                                         );
-
-                        foreach (@connections) {
-                            my ($string, $type) = @$_;
-                            $connections{$string} = $type;
-                        }
-                        @connection_list = { val => \$cnx_type, type => 'list', list => [ map { $_->[0] } @connections ], };
-                    },
-                    if_(!$::isInstall, no_back => 1),
-                    name => N("Choose the connection you want to configure"),
-                    interactive_help_id => 'configureNetwork',
-                    data => \@connection_list,
-                    post => sub {
-                        $is_wireless = $cnx_type eq N("Wireless connection");
-                        #- why read again the net_conf here?
-                        read_net_conf($netcnx, $netc, $intf) if $::isInstall;  # :-(
-                        $type = $netcnx->{type} = $connections{$cnx_type};
-                        return $type;
-                    },
-                   },
-
-                   prepare_detection =>
-                   {
-                    name => N("We are now going to configure the %s connection.\n\n\nPress \"%s\" to continue.",
-                              translate($type), N("Next")),
-                    post => $handle_multiple_cnx,
-                   },
-
-
-                   hw_account => 
-                   {
-                    name => N("Connection Configuration") . "\n\n" .
-                    N("Please fill or check the field below"),
-                    data => sub {
-                             [
-                             (map {
-                                 my ($dstruct, $field, $item) = @$_;
-                                 $item->{val} = \$dstruct->{$field};
-                                 if__(exists $dstruct->{$field}, $item);
-                             } ([ $netcnx, "irq", { label => N("Card IRQ") } ],
-                                [ $netcnx, "mem", { label => N("Card mem (DMA)") } ],
-                                [ $netcnx, "io",  { label => N("Card IO") } ],
-                                [ $netcnx, "io0", { label => N("Card IO_0") } ],
-                                [ $netcnx, "io1", { label => N("Card IO_1") } ],
-                                [ $isdn, "phone_in",     { label => N("Your personal phone number") } ],
-                                [ $netc,   "DOMAINNAME2",  { label => N("Provider name (ex provider.net)") } ],
-                                [ $isdn, "phone_out",    { label => N("Provider phone number") } ],
-                                [ $netc,   "dnsServer2",   { label => N("Provider DNS 1 (optional)") } ],
-                                [ $netc,   "dnsServer3",   { label => N("Provider DNS 2 (optional)") } ],
-                                [ $isdn, "dialing_mode", { label => N("Dialing mode"),  list => ["auto", "manual"] } ],
-                                [ $isdn, "speed",        { label => N("Connection speed"), list => ["64 Kb/s", "128 Kb/s"] } ],
-                                [ $netcnx, "huptimeout",   { label => N("Connection timeout (in sec)") } ], #unused?
-                               )
-                             ),
-                             ({ label => N("Account Login (user name)"), val => \$isdn->{login} },
-                              { label => N("Account Password"),  val => \$isdn->{passwd}, hidden => 1 },
-                             )
-                            ];
-                            },
-                    post => sub {
-                        network::isdn::write_config($isdn);
-                        $netc->{$_} = 'ippp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
-                        $handle_multiple_cnx->();
-                    },
-                   },
-
-                   cable =>
-                   {
-                    pre => sub {
-                        $cable_no_auth = sub { $netc->{bpalogin} eq N("None") };
-                    },
-                    name => N("Cable: account options"),
-                    data => sub {
-                        [
-                            { label => N("Authentication"), type => "list", val => \$netc->{bpalogin}, list => [ N("None"), N("Use BPALogin (needed for Telstra)") ] },
-                            { label => N("Account Login (user name)"), val => \$netcnx->{login}, disabled => $cable_no_auth },
-                            { label => N("Account Password"),  val => \$netcnx->{passwd}, hidden => 1, disabled => $cable_no_auth },
-                        ];
-                    },
-                    post => sub {
-                        if ($cable_no_auth->()) {
-                            if (-f "$::prefix/etc/rc.d/init.d/bpalogin") {
-                                require services;
-                                services::stop("bpalogin");
-                                services::do_not_start_service_on_boot("bpalogin");
-                            }
-                        } else {
-                            if ($in->do_pkgs->install("bpalogin")) {
-                                substInFile {
-                                    s/username\s+.*\n/username $netcnx->{login}\n/;
-                                    s/password\s+.*\n/password $netcnx->{passwd}\n/;
-                                } "$::prefix/etc/bpalogin.conf";
-                                require services;
-                                services::start_service_on_boot("bpalogin");
-                                services::restart("bpalogin");
-                            }
-                        }
-                        $auto_ip = 1;
-                        return "lan";
-                    }
-                   },
-
-                   isdn =>
-                   {
-                    pre=> sub {
-                        detect($modules_conf, $netc->{autodetect}, 'isdn');
-                        %isdn_cards = map { $_->{description} => $_ } @{$netc->{autodetect}{isdn}};
-                    },
-                    name => N("Select the network interface to configure:"),
-                    data =>  sub {
-                        [ { label => N("Net Device"), type => "list", val => \$isdn_name, allow_empty_list => 1,
-                            list => [ $my_isdn, N("External ISDN modem"), keys %isdn_cards ] } ];
-                    },
-                    post => sub {
-                        # !intern_pci:
-                        # data => [ { val => \$isdn_type, type => "list", list => [ ,  ], } ],
-                        # post => sub {
-                        if ($isdn_name eq $my_isdn) {
-                            return "isdn_ask";
-                        } elsif ($isdn_name eq N("External ISDN modem")) {
-                            detect($modules_conf, $netc->{autodetect}, 'modem');
-                            $netcnx->{type} = $netc->{isdntype} = 'isdn_external';
-                            $netcnx->{isdn_external}{device} = network::modem::first_modem($netc);
-                            network::isdn::read_config($netcnx->{isdn_external});
-                            #- FIXME: seems to be specific to ZyXEL Adapter Omni.net/TA 128/Elite 2846i
-                            #- it does not even work with TA 128 modems
-                            #- http://bugs.mandrakelinux.com/query.php?bug=1033
-                            $netcnx->{isdn_external}{special_command} = 'AT&F&O2B40';
-                            require network::modem;
-                            $modem = $netcnx->{isdn_external};
-                            return "modem";
-                        }
-
-                        $netc->{isdntype} = 'isdn_internal';
-                        # FIXME: some of these should be taken from isdn db
-                        $netcnx->{isdn_internal} = $isdn = { map { $_ => $isdn_cards{$isdn_name}{$_} } qw(description vendor id card_type driver type mem io io0 io1 irq firmware) };
-
-                        if ($isdn->{id}) {
-                            log::explanations("found isdn card : $isdn->{description}; vendor : $isdn->{vendor}; id : $isdn->{id}; driver : $isdn->{driver}\n");
-                            $isdn->{description} =~ s/\|/ -- /;
-                        }
-
-                        network::isdn::read_config($isdn);
-                        $isdn->{driver} = $isdn_cards{$isdn_name}{driver}; #- do not let config overwrite default driver
-
-                        #- let the user choose hisax or capidrv if both are available
-                        $isdn->{driver} ne "capidrv" && network::isdn::get_capi_card($isdn) and return "isdn_driver";
-                        return "isdn_protocol";
-                    },
-                   },
-
-
-                   isdn_ask =>
-                   {
-                    pre => sub {
-                        %isdn_cards = network::isdn::get_cards();
-                    },
-                    name => N("Select a device!"),
-                    data => sub { [ { label => N("Net Device"), val => \$isdn_name, type => 'list', separator => '|', list => [ keys %isdn_cards ], allow_empty_list => 1 } ] },
-                    pre2 => sub {
-                        my ($label) = @_;
-
-                        #- ISDN card already detected
-                        goto isdn_ask_step_3;
-
-                      isdn_ask_step_1:
-                        my $e = $in->ask_from_list_(N("ISDN Configuration"),
-                                                    $label . "\n" . N("What kind of card do you have?"),
-                                                    [ N_("ISA / PCMCIA"), N_("PCI"), N_("USB"), N_("I do not know") ]
-                                                   ) or return;
-                      isdn_ask_step_1b:
-                        if ($e =~ /PCI/) {
-                            $isdn->{card_type} = 'pci';
-                        } elsif ($e =~ /USB/) {
-                            $isdn->{card_type} = 'usb';
-                        } else {
-                            $in->ask_from_list_(N("ISDN Configuration"),
-                                                N("
-If you have an ISA card, the values on the next screen should be right.\n
-If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.
-"),
-                                                [ N_("Continue"), N_("Abort") ]) eq 'Continue' or goto isdn_ask_step_1;
-                            $isdn->{card_type} = 'isa';
-                        }
-
-                      isdn_ask_step_2:
-                        $e = $in->ask_from_listf(N("ISDN Configuration"),
-                                                 N("Which of the following is your ISDN card?"),
-                                                 sub { $_[0]{description} },
-                                                 [ network::isdn::get_cards_by_type($isdn->{card_type}) ]) or goto($isdn->{card_type} =~ /usb|pci/ ? 'isdn_ask_step_1' : 'isdn_ask_step_1b');
-                        $e->{$_} and $isdn->{$_} = $e->{$_} foreach qw(driver type mem io io0 io1 irq firmware);
-
-                        },
-                    post => sub {
-                        $netcnx->{isdn_internal} = $isdn = $isdn_cards{$isdn_name};
-                        return "isdn_protocol";
-                    }
-                   },
-
-
-                   isdn_driver =>
-                   {
-                    pre => sub {
-                        $isdn_name = "capidrv";
-                    },
-                    name => N("A CAPI driver is available for this modem. This CAPI driver can offer more capabilities than the free driver (like sending faxes). Which driver do you want to use?"),
-                    data => sub { [
-                                   { label => N("Driver"), type => "list", val => \$isdn_name,
-                                     list => [ $isdn->{driver}, "capidrv" ] }
-                                  ] },
-                    post => sub {
-                        $isdn->{driver} = $isdn_name;
-                        return "isdn_protocol";
-                    }
-                   },
-
-
-                   isdn_protocol =>
-                   {
-                    name => N("ISDN Configuration") . "\n\n" . N("Which protocol do you want to use?"),
-                    data => [
-                             { label => N("Protocol"), type => "list", val => \$isdn_type,
-                               list => [ keys %isdn_protocols ], format => sub { $isdn_protocols{$_[0]} } }
-                            ],
-                    post => sub { 
-                        $isdn->{protocol} = $isdn_type;
-                        return "isdn_db";
-                    }
-                   },
-
-
-                   isdn_db =>
-                   {
-                    name => N("ISDN Configuration") . "\n\n" . N("Select your provider.\nIf it is not listed, choose Unlisted."),
-                    data => sub {
-                        [ { label => N("Provider:"), type => "list", val => \$provider, separator => '|',
-                            list => [ N("Unlisted - edit manually"), network::isdn::read_providers_backend() ] } ];
-                    },
-                    post => sub {
-                        network::isdn::get_info_providers_backend($isdn, $netc, $provider);
-                        $isdn->{huptimeout} = 180;
-                        $isdn->{$_} ||= '' foreach qw(phone_in phone_out dialing_mode login passwd passwd2 idl speed);
-                        add2hash($netc, { dnsServer2 => '', dnsServer3 => '', DOMAINNAME2 => '' });
-                        return "hw_account";
-                    },
-                   },
-
-
-                   no_supported_winmodem =>
-                   {
-                    name => N("Warning") . "\n\n" . N("Your modem is not supported by the system.
-Take a look at http://www.linmodems.org"),
-                    end => 1,
-                   },
-
-
-                   modem =>
-                   {
-                    pre => sub {
-                        require network::modem;
-                        detect($modules_conf, $netc->{autodetect}, 'modem');
-                    },
-                    name => N("Select the modem to configure:"),
-                    data => sub {
-                        [ { label => N("Modem"), type => "list", val => \$modem_name, allow_empty_list => 1,
-                            list => [ keys %{$netc->{autodetect}{modem}}, N("Manual choice") ], } ];
-                    },
-                    post => sub {
-                        $modem ||= $netcnx->{modem} ||= {};
-                        return 'choose_serial_port' if $modem_name eq N("Manual choice");
-                        $ntf_name = $netc->{autodetect}{modem}{$modem_name}{device} || $netc->{autodetect}{modem}{$modem_name}{description};
-
-                        return "ppp_provider" if $ntf_name =~ m!^/dev/!;
-                        return "choose_serial_port" if !$ntf_name;
-
-                        my $type;
-
-                        my %pkgs2path = (
-                                         hcfpcimodem => "/usr/sbin/hcfpciconfig",
-                                         hsfmodem => "/usr/sbin/hsfconfig",
-                                         ltmodem => "/etc/devfs/conf.d/ltmodem.conf",
-                                         slmodem => "/usr/sbin/slmodemd",
-                                        );
-
-                        my %devices = (
-                                       hcfpcimodem => '/dev/ttySHSF0',
-                                       hsfmodem => '/dev/ttySHSF0',
-                                       ltmodem => '/dev/ttyS14',
-                                       slmodem => '/dev/ttySL0',
-                                      );
-
-                        if (my $driver = $netc->{autodetect}{modem}{$modem_name}{driver}) {
-                            $driver =~ /^Hcf:/ and $type = "hcfpcimodem";
-                            $driver =~ /^Hsf:/ and $type = "hsfmodem";
-                            $driver =~ /^LT:/  and $type = "ltmodem";
-                            #- we may need a better agreement to use list_modules::category2modules('network/slmodem')
-                            member($driver, list_modules::category2modules('network/slmodem')) and $type = "slmodem";
-                            if ($type && (my $packages = $in->do_pkgs->check_kernel_module_packages("$type-kernel", if_(! -f $pkgs2path{$type}, $type)))) {
-                                $in->do_pkgs->install(@$packages);
-                                # start slmodemd when installing it (thus preventing the average user to have to restart
-                                # his machine in order to get a working connection):
-                                system("service slmodemd start") if $::isStandalone && $type eq 'slmodem';
-                                $modem->{device} = $devices{$type} || '/dev/modem';
-                                return "ppp_provider";
-                            }
-                        }
-
-                        return "no_supported_winmodem";
-                    },
-                   },
-
-                   choose_serial_port =>
-                   {
-                    pre => sub {
-                        $modem->{device} ||= readlink "$::prefix/dev/modem";
-                    },
-                    name => N("Please choose which serial port your modem is connected to."),
-                    interactive_help_id => 'selectSerialPort',
-                    data => sub {
-                        [ { val => \$modem->{device}, format => \&mouse::serial_port2text, type => "list",
-                            list => [ grep { $_ ne $o_mouse->{device} } (mouse::serial_ports(), grep { -e $_ } '/dev/modem', '/dev/ttySL0', '/dev/ttyS14',) ] } ];
-                        },
-                    post => sub {
-                        $ntf_name = $modem->{device};
-                        return 'ppp_provider';
-                    },
-                   },
-
-
-                   ppp_provider =>
-                   {
-                    pre => sub {
-                        network::modem::ppp_read_conf($netcnx, $netc) if !$modem_conf_read;
-                        $modem_conf_read = 1;
-                        $in->do_pkgs->ensure_is_installed('kdenetwork-kppp-provider', $db_path);
-                        my $p_db_path = "$::prefix$db_path";
-                        @isp = map {
-                            my $country = $_;
-                            map { 
-                                s!$p_db_path/$country!!;
-                                s/%([0-9]{3})/chr(int($1))/eg;
-                                $countries{$country} ||= translate($country);
-                                join('', $countries{$country}, $_);
-                            } grep { !/.directory$/ } glob_("$p_db_path/$country/*");
-                        } map { s!$p_db_path/!!o; s!_! !g; $_ } glob_("$p_db_path/*");
-                        $old_provider = $provider;
-                    },
-                    name => N("Select your provider:"),
-                    data => sub {
-                        [ { label => N("Provider:"), type => "list", val => \$provider, separator => '/',
-                            list => [ N("Unlisted - edit manually"), @isp ] } ];
-                    },
-                    post => sub {
-                        if ($provider ne N("Unlisted - edit manually")) {
-                            ($country, $provider) = split('/', $provider);
-                            $country = { reverse %countries }->{$country};
-                            my %l = getVarsFromSh("$::prefix$db_path/$country/$provider");
-                            if (defined $old_provider && $old_provider ne $provider) {
-                                $modem->{connection} = $l{Name};
-                                $modem->{phone} = $l{Phonenumber};
-                                $modem->{$_} = $l{$_} foreach qw(Authentication AutoName Domain Gateway IPAddr SubnetMask);
-                                ($modem->{dns1}, $modem->{dns2}) = split(',', $l{DNS});
-                            }
-                        }
-                        return "ppp_account";
-                    },
-                   },
-
-
-                   ppp_account =>
-                   {
-                    name => N("Dialup: account options"),
-                    data => sub {
-                            [
-                             { label => N("Connection name"), val => \$modem->{connection} },
-                             { label => N("Phone number"), val => \$modem->{phone} },
-                             { label => N("Login ID"), val => \$modem->{login} },
-                             { label => N("Password"), val => \$modem->{passwd}, hidden => 1 },
-                             { label => N("Authentication"), val => \$modem->{Authentication},
-                               list => [ sort keys %ppp_auth_methods ], format => sub { $ppp_auth_methods{$_[0]} } },
-                            ];
-                        },
-                    next => "ppp_ip",
-                   },
-
-
-                   ppp_ip =>
-                   {
-                    pre => sub {
-                        $modem_dyn_ip = sub { $modem->{auto_ip} eq N("Automatic") };
-                    },
-                    name => N("Dialup: IP parameters"),
-                    data => sub {
-                        [
-                         { label => N("IP parameters"), type => "list", val => \$modem->{auto_ip}, list => [ N("Automatic"), N("Manual") ] },
-                         { label => N("IP address"), val => \$modem->{IPAddr}, disabled => $modem_dyn_ip },
-                         { label => N("Subnet mask"), val => \$modem->{SubnetMask}, disabled => $modem_dyn_ip },
-                        ];
-                    },
-                    next => "ppp_dns",
-                   },
-
-
-                   ppp_dns =>
-                   {
-                    pre => sub {
-                        $modem_dyn_dns = sub { $modem->{auto_dns} eq N("Automatic") };
-                    },
-                    name => N("Dialup: DNS parameters"),
-                    data => sub {
-                        [
-                         { label => N("DNS"), type => "list", val => \$modem->{auto_dns}, list => [ N("Automatic"), N("Manual") ] },
-                         { label => N("Domain name"), val => \$modem->{domain}, disabled => $modem_dyn_dns },
-                         { label => N("First DNS Server (optional)"), val => \$modem->{dns1}, disabled => $modem_dyn_dns },
-                         { label => N("Second DNS Server (optional)"), val => \$modem->{dns2}, disabled => $modem_dyn_dns },
-                         { text => N("Set hostname from IP"), val => \$modem->{AutoName}, type => 'bool', disabled => $modem_dyn_dns },
-                        ];
-                    },
-                    next => "ppp_gateway",
-                   },
-
-
-                   ppp_gateway =>
-                   {
-                    name => N("Dialup: IP parameters"),
-                    data => sub {
-                        [
-                         { label => N("Gateway"), type => "list", val => \$modem->{auto_gateway}, list => [ N("Automatic"), N("Manual") ] },
-                         { label => N("Gateway IP address"), val => \$modem->{Gateway},
-                           disabled => sub { $modem->{auto_gateway} eq N("Automatic") } },
-                        ];
-                        },
-                    post => sub {
-                        network::modem::ppp_configure($in, $modem);
-                        $netc->{$_} = 'ppp0' foreach 'NET_DEVICE', 'NET_INTERFACE';
-                        $handle_multiple_cnx->();
-                    },
-                   },
-
-
-                   adsl =>
-                   {
-                    pre => sub {
-                        get_subwizard($wiz, 'adsl');
-                        $lan_detect->();
-                        @adsl_devices = keys %eth_intf;
-
-                        detect($modules_conf, $netc->{autodetect}, 'adsl');
-                        %adsl_cards = ();
-                        foreach my $modem_type (keys %{$netc->{autodetect}{adsl}}) {
-                            foreach my $modem (@{$netc->{autodetect}{adsl}{$modem_type}}) {
-                                my $name = join(': ', $adsl_descriptions{$modem_type}, $modem->{description});
-                                $adsl_cards{$name} = [ $modem_type, $modem ];
-                            }
-                        }
-                        push @adsl_devices, keys %adsl_cards;
-
-                        detect($modules_conf, $netc->{autodetect}, 'isdn');
-                        if (my @isdn_modems = @{$netc->{autodetect}{isdn}}) {
-                            require network::isdn;
-                            %isdn_cards = map { $_->{description} => $_ } grep { $_->{driver} =~ /dsl/i } map { network::isdn::get_capi_card($_) } @isdn_modems;
-                            push @adsl_devices, keys %isdn_cards;
-                        }
-                    },
-                    name => N("ADSL configuration") . "\n\n" . N("Select the network interface to configure:"),
-                    data =>  [ { label => N("Net Device"), type => "list", val => \$ntf_name, allow_empty_list => 1,
-                               list => \@adsl_devices, format => sub { $eth_intf{$_[0]} || $_[0] } } ],
-                    post => sub {
-                        my %packages = (
-                                        'eci'        => [ 'eciadsl', 'missing' ],
-                                        'sagem'      => [ 'eagle-usb',  "/sbin/eaglectrl" ],
-                                        'speedtouch' => [ 'speedtouch', "/usr/sbin/modem_run" ],
-                                       );
-                        return 'adsl_unsupported_eci' if $ntf_name eq 'eci';
-                        if (exists $adsl_cards{$ntf_name}) {
-                            my $modem;
-                            ($ntf_name, $modem) = @{$adsl_cards{$ntf_name}};
-                            # FIXME: check that the package installation succeeds, else retry or abort
-                            $in->do_pkgs->ensure_is_installed(@{$packages{$ntf_name}}) if $packages{$ntf_name};
-                            if ($ntf_name eq 'speedtouch') {
-                                $in->do_pkgs->ensure_is_installed_if_available('speedtouch_mgmt', "/usr/share/speedtouch/mgmt.o");
-                                return 'adsl_speedtouch_firmware' if ! -e "$::prefix/usr/share/speedtouch/mgmt.o";
-                            }
-                            $netcnx->{bus} = $modem->{bus} if $ntf_name eq 'bewan';
-                            if ($ntf_name eq 'bewan' && !$::testing) {
-                                if (my $unicorn_packages = $in->do_pkgs->check_kernel_module_packages('unicorn-kernel', 'unicorn')) {
-                                    $in->do_pkgs->install(@$unicorn_packages);
-                                }
-                            }
-                        }
-                        if (exists($isdn_cards{$ntf_name})) {
-                            require network::isdn;
-                            $netcnx->{capi} = $isdn_cards{$ntf_name};
-                            $adsl_type = "capi";
-                            return 'adsl_account';
-                        }
-                        return 'adsl_provider';
-                    },
-                   },
-
-
-                   adsl_provider =>
-                   {
-                    pre => sub {
-                        require network::adsl_consts;
-                        %adsl_data = %network::adsl_consts::adsl_data;
-                        $adsl_old_provider = $adsl_provider;
-                    },
-                    name => N("Please choose your ADSL provider"),
-                    data => sub {
-                        [ { label => N("Provider:"), type => "list", val => \$adsl_provider, separator => '|',
-                            list => [ sort(N("Unlisted - edit manually"), keys %adsl_data) ], sort => 0 } ];
-                    },
-                    post => sub {
-                        $adsl_type = 'pppoa' if member($ntf_name, qw(bewan speedtouch));
-                        if ($adsl_provider ne N("Unlisted - edit manually")) {
-                            $adsl_data = $adsl_data{$adsl_provider};
-                            if ($adsl_provider ne $adsl_old_provider) {
-                                $netc->{$_} = $adsl_data->{$_} foreach qw(DOMAINNAME2 Encapsulation vpi vci provider_id);
-                                $adsl_type = $adsl_data->{method};
-                            }
-                        }
-                        return 'adsl_protocol';
-                    },
-                   },
-
-
-                   adsl_speedtouch_firmware =>
-                   {
-                    name => N("You need the Alcatel microcode.
-You can provide it now via a floppy or your windows partition,
-or skip and do it later."),
-                    data => [ { label => "", val => \$adsl_answer, type => "list",
-                                list => [ N("Use a floppy"), N("Use my Windows partition"), N("Do it later") ], }
-                            ],
-                    post => sub {
-                        my $destination = "$::prefix/usr/share/speedtouch/";
-                        my ($file, $source, $mounted);
-                        if ($adsl_answer eq N("Use a floppy")) {
-                            $mounted = 1;
-                            $file = 'mgmt.o';
-                            ($source, $adsl_failed) = network::tools::use_floppy($in, $file);
-                        } elsif ($adsl_answer eq N("Use my Windows partition")) {
-                            ($source, $adsl_failed) = network::tools::use_windows($file = 'alcaudsl.sys');
-                        }
-                        return "adsl_no_firmawre" if $adsl_answer eq N("Do it later");
-
-                        my $_b = $mounted && before_leaving { fs::umount('/mnt') };
-                        if (!$adsl_failed) {
-                            if (-e "$source/$file") { 
-                                cp_af("$source/$file", $destination) if !$::testing;
-                            } else {
-                                $adsl_failed = N("Firmware copy failed, file %s not found", $file);
-                            }
-                        }
-                        log::explanations($adsl_failed || "Firmware copy $file in $destination succeeded");
-                        -e "$destination/alcaudsl.sys" and rename "$destination/alcaudsl.sys", "$destination/mgmt.o";
-
-                        # kept translations b/c we may want to reuse it later:
-                        my $_msg = N("Firmware copy succeeded");
-                        return $adsl_failed ? 'adsl_copy_firmware_failled' : 'adsl_provider';
-                    },
-                   },
-
-
-                   adsl_copy_firmware_failled =>
-                   {
-                    name => sub { $adsl_failed },
-                    next => 'adsl_provider',
-                   },
-
-
-                   "adsl_no_firmawre" =>
-                   {
-                    name => N("You need the Alcatel microcode.
-Download it at:
-%s
-and copy the mgmt.o in /usr/share/speedtouch", 'http://www.speedtouch.com/supuser.htm'),
-                    next => "adsl_provider",
-                   },
-
-
-                   adsl_protocol =>
-                   {
-                    pre => sub {
-                        # preselect right protocol for ethernet though connections:
-                        if (!exists $adsl_descriptions{$ntf_name}) {
-                            $ethntf = $intf->{$ntf_name} ||= { DEVICE => $ntf_name };
-                            $adsl_type ||= $ethntf->{BOOTPROTO} || "dhcp";
-                            #- FIXME: use static instead of manual as key in %adsl_types
-                            $adsl_type = "manual" if $adsl_type eq "static";
-                            #- pppoa shouldn't be selected by default for ethernet devices, fallback on pppoe
-                            $adsl_type = "pppoe" if $adsl_type eq "pppoa";
-                        }
-                    },
-                    name => N("Connect to the Internet") . "\n\n" .
-                    N("The most common way to connect with adsl is pppoe.
-Some connections use PPTP, a few use DHCP.
-If you do not know, choose 'use PPPoE'"),
-                    data =>  [
-                              { text => N("ADSL connection type:"), val => \$adsl_type, type => "list",
-                                list => [ sort { $adsl_types{$a} cmp $adsl_types{$b} } keys %adsl_types ],
-                                format => sub { $adsl_types{$_[0]} },
-                              },
-                             ],
-                    post => sub {
-                        my $real_interface = $ntf_name;
-                        $netcnx->{type} = 'adsl';
-                        # blacklist bogus driver, enable ifplugd support else:
-                        $find_lan_module->();
-                        $ethntf->{MII_NOT_SUPPORTED} ||= $is_hotplug_blacklisted->();
-                        if ($ntf_name eq "sagem"  && member($adsl_type, qw(manual dhcp))) {
-                            #- "fctStartAdsl -i" builds ifcfg-ethX from ifcfg-sagem and echoes ethX
-                            #- it auto-detects dhcp/static modes thanks to encapsulation setting
-                            $ethntf = $intf->{sagem} ||= {};
-                            $ethntf->{DEVICE} = "`/usr/sbin/fctStartAdsl -i`";
-                            $ethntf->{MII_NOT_SUPPORTED} = "yes";
-                        }
-                        if ($ntf_name eq "speedtouch"  && member($adsl_type, qw(manual dhcp))) {
-                            #- use ATMARP with the atm0 interface
-                            $real_interface = "atm0";
-                            $ethntf = $intf->{$real_interface} ||= {};
-                            $ethntf->{DEVICE} = $real_interface;
-                            $ethntf->{ATM_ADDR} = undef;
-                            $ethntf->{MII_NOT_SUPPORTED} = "yes";
-                        }
-                        #- delete gateway settings if gateway device is invalid or if reconfiguring the gateway interface
-                        exists $intf->{$real_interface} and $delete_gateway_settings->($real_interface);
-                        # process static/dhcp ethernet devices:
-                        if (exists($intf->{$real_interface}) && member($adsl_type, qw(manual dhcp))) {
-                            $ethntf->{TYPE} = "ADSL";
-                            $auto_ip = $adsl_type eq 'dhcp';
-                            return 'lan_intf';
-                        }
-                        return 'adsl_account';
-                    },
-                   },
-
-
-                   adsl_account =>
-                   {
-                    pre => sub {
-                        network::adsl::adsl_probe_info($netcnx, $netc, $adsl_type, $ntf_name);
-                        $netc->{NET_DEVICE} = member($adsl_type, 'pppoe', 'pptp') ? $ntf_name : 'ppp0';
-                        $netc->{NET_INTERFACE} = 'ppp0';
-                        ($adsl_vpi, $adsl_vci) = map { hex($_) } @$netc{'vpi', 'vci'};
-                    },
-                    name => N("Connection Configuration") . "\n\n" .
-                    N("Please fill or check the field below"),
-                    data => sub {
-                        [ 
-                         if_(0, { label => N("Provider name (ex provider.net)"), val => \$netc->{DOMAINNAME2} }),
-                         { label => N("First DNS Server (optional)"), val => \$netc->{dnsServer2} },
-                         { label => N("Second DNS Server (optional)"), val => \$netc->{dnsServer3} },
-                         { label => N("Account Login (user name)"), val => \$netcnx->{login} },
-                         { label => N("Account Password"),  val => \$netcnx->{passwd}, hidden => 1 },
-                         if_($adsl_type ne "capi",
-                             { label => N("Virtual Path ID (VPI):"), val => \$adsl_vpi, advanced => 1 },
-                             { label => N("Virtual Circuit ID (VCI):"), val => \$adsl_vci, advanced => 1 }
-                            ),
-                         if_($ntf_name eq "sagem",
-                             { label => N("Encapsulation:"), val => \$netc->{Encapsulation}, list => [ keys %encapsulations ],
-                               format => sub { $encapsulations{$_[0]} }, advanced => 1,
-                             },
-                            ),
-                        ];
-                    },
-                    post => sub {
-                        #- update ATM_ADDR for ATMARP connections
-                        exists $ethntf->{ATM_ADDR} and $ethntf->{ATM_ADDR} = join('.', $adsl_vpi, $adsl_vci);
-                        #- convert VPI/VCI back to hex
-                        @$netc{'vpi', 'vci'} = map { sprintf("%x", $_) } ($adsl_vpi, $adsl_vci);
-
-                        $netc->{internet_cnx_choice} = 'adsl';
-                        network::adsl::adsl_conf_backend($in, $modules_conf, $netcnx, $netc, $intf, $ntf_name, $adsl_type, $netcnx); #FIXME
-                        $config->{adsl} = { kind => $ntf_name, protocol => $adsl_type };
-                        $handle_multiple_cnx->();
-                    },
-                   },
-
-
-                    adsl_unsupported_eci =>
-                    {
-                     name => N("The ECI Hi-Focus modem cannot be supported due to binary driver distribution problem.
-
-You can find a driver on http://eciadsl.flashtux.org/"),
-                     end => 1,
-                    },
-
-
-                   lan =>
-                   {
-                    pre => $lan_detect,
-                    name => N("Select the network interface to configure:"),
-                    data =>  sub {
-                        [ { label => N("Net Device"), type => "list", val => \$ntf_name, list => [ (sort keys %eth_intf), N_("Manually load a driver"), if_($is_wireless, N_("Use a Windows driver (with ndiswrapper)")) ], 
-                            allow_empty_list => 1, format => sub { translate($eth_intf{$_[0]} || $_[0]) } } ];
-                    },
-                    complete => sub {
-                        if ($ntf_name eq "Use a Windows driver (with ndiswrapper)") {
-                            require network::ndiswrapper;
-                            unless ($in->do_pkgs->ensure_is_installed('ndiswrapper', '/usr/sbin/ndiswrapper')) {
-                                $in->ask_warn(N("Error"), N("Could not install the %s package!", 'ndiswrapper'));
-                                return 1;
-                            }
-                            undef $ndiswrapper_driver;
-                            undef $ndiswrapper_device;
-                            unless (network::ndiswrapper::installed_drivers()) {
-                                $ndiswrapper_driver = network::ndiswrapper::ask_driver($in) or return 1;
-                                return !$ndiswrapper_do_driver_selection->();
-                            }
-                        }
-                        0;
-                    },
-                    post => sub {
-                        if ($ntf_name eq "Manually load a driver") {
-                            modules::interactive::load_category__prompt($in, $modules_conf, list_modules::ethernet_categories());
-                            return 'lan';
-                        } elsif ($ntf_name eq "Use a Windows driver (with ndiswrapper)") {
-                            return $ndiswrapper_next_step->();
-                        }
-                        $ethntf = $intf->{$ntf_name} ||= { DEVICE => $ntf_name };
-                        return $after_lan_intf_selection->();
-                    },
-                   },
-
-
-                   lan_protocol =>
-                   {
-                    pre => sub  {
-                        $find_lan_module->();
-                        my $intf_type = member($module, list_modules::category2modules('network/gigabit')) ? "ethernet_gigabit" : "ethernet";
-                        defined($ethntf->{METRIC}) or $ethntf->{METRIC} = network::tools::get_default_metric($intf_type);
-
-                        $protocol = $l10n_lan_protocols{defined $auto_ip ? ($auto_ip ? 'dhcp' : 'static') : $ethntf->{BOOTPROTO}} || 0;
-                    },
-                    name => sub { 
-                        my $_msg = N("Zeroconf hostname resolution");
-                        N("Configuring network device %s (driver %s)", $ethntf->{DEVICE}, $module) . "\n\n" .
-                          N("The following protocols can be used to configure a LAN connection. Please choose the one you want to use");
-                    },
-                    data => sub {
-                        [ { val => \$protocol, type => "list", list => [ sort values %l10n_lan_protocols ] } ];
-                    },
-                    post => sub {
-                        $auto_ip = $protocol ne $l10n_lan_protocols{static} || 0;
-                        return 'lan_intf';
-                    },
-                   },
-
-
-                   # FIXME: is_install: no return for each card "last step" because of manual popping
-                   # better construct an hash of { current_netintf => next_step } which next_step = last_card ? next_eth_step : next_card ?
-                   lan_intf =>
-                   {
-                    pre => sub  {
-                        $onboot = $ethntf->{ONBOOT} ? $ethntf->{ONBOOT} =~ /yes/ : bool2yesno(!member($ethntf->{DEVICE},
-                                                                                                      map { $_->{device} } detect_devices::pcmcia_probe()));
-                        $needhostname = $ethntf->{NEEDHOSTNAME} !~ /no/;
-                        $peerdns = $ethntf->{PEERDNS} !~ /no/;
-                        $peeryp = $ethntf->{PEERYP} =~ /yes/;
-                        $peerntpd = $ethntf->{PEERNTPD} =~ /yes/;
-                        # blacklist bogus driver, enable ifplugd support else:
-                        $ethntf->{MII_NOT_SUPPORTED} ||= $is_hotplug_blacklisted->();
-                        $hotplug = !text2bool($ethntf->{MII_NOT_SUPPORTED});
-                        $track_network_id = $::isStandalone && $ethntf->{HWADDR} || detect_devices::isLaptop();
-                        delete $ethntf->{TYPE} if $netcnx->{type} ne 'adsl' || !member($adsl_type, qw(manual dhcp));
-                        $ethntf->{DHCP_CLIENT} ||= (find { -x "$::prefix/sbin/$_" } qw(dhclient dhcpcd pump dhcpxd));
-                    },
-                    name => sub { join('', 
-                                       N("Configuring network device %s (driver %s)", $ethntf->{DEVICE}, $module),
-                                       if_(!$auto_ip, "\n\n" . N("Please enter the IP configuration for this machine.
-Each item should be entered as an IP address in dotted-decimal
-notation (for example, 1.2.3.4).")),
-                                      )  },
-                    data => sub {
-                        [ $auto_ip ? 
-                          (
-                           { text => N("Assign host name from DHCP address"), val => \$needhostname, type => "bool" },
-                           { label => N("DHCP host name"), val => \$ethntf->{DHCP_HOSTNAME} },
-                          )
-                          :
-                          (
-                           { label => N("IP address"), val => \$ethntf->{IPADDR}, disabled => sub { $auto_ip } },
-                           { label => N("Netmask"), val => \$ethntf->{NETMASK}, disabled => sub { $auto_ip } },
-                          ),
-                          { text => N("Track network card id (useful for laptops)"), val => \$track_network_id, type => "bool" },
-                          if_(!$is_wireless,
-                              { text => N("Network Hotplugging"), val => \$hotplug, type => "bool" }),
-                          if_($netcnx->{type} eq "lan",
-                              { text => N("Start at boot"), val => \$onboot, type => "bool" },
-                             ),
-                          { label => N("Metric"), val => \$ethntf->{METRIC}, advanced => 1 },
-                          if_($auto_ip,
-                              { label => N("DHCP client"), val => \$ethntf->{DHCP_CLIENT},
-                                list => \@network::ethernet::dhcp_clients, advanced => 1 },
-                              { label => N("DHCP timeout (in seconds)"), val => \$ethntf->{DHCP_TIMEOUT}, advanced => 1 },
-                              { text => N("Get DNS servers from DHCP"), val => \$peerdns, type => "bool", advanced => 1 },
-                              { text => N("Get YP servers from DHCP"), val => \$peeryp, type => "bool", advanced => 1 },
-                              { text => N("Get NTPD servers from DHCP"), val => \$peerntpd, type => "bool", advanced => 1 },
-                             ),
-                        ];
-                    },
-                    complete => sub {
-                        $ethntf->{BOOTPROTO} = $auto_ip ? "dhcp" : "static";
-                        $netc->{DHCP} = $auto_ip;
-                        return 0 if $auto_ip;
-                        if (!is_ip($ethntf->{IPADDR})) {
-                            $in->ask_warn(N("Error"), N("IP address should be in format 1.2.3.4"));
-                            return 1, 0;
-                        }
-                        if (!is_ip($ethntf->{NETMASK})) {
-                            $in->ask_warn(N("Error"), N("Netmask should be in format 255.255.224.0"));
-                            return 1, 1;
-                        }
-                        if (is_ip_forbidden($ethntf->{IPADDR})) {
-                          $in->ask_warn(N("Error"), N("Warning: IP address %s is usually reserved!", $ethntf->{IPADDR}));
-                          return 1, 0;
-                        }
-                        #- test if IP address is already used (do not test for sagem DSL devices since it may use many ifcfg files)
-                        if ($ntf_name ne "sagem" && find { $_->{DEVICE} ne $ethntf->{DEVICE} && $_->{IPADDR} eq $ethntf->{IPADDR} } values %$intf) {
-                          $in->ask_warn(N("Error"), N("%s already in use\n", $ethntf->{IPADDR}));
-                          return 1, 0;
-                        }
-                    },
-                    focus_out => sub {
-                        $ethntf->{NETMASK} ||= netmask($ethntf->{IPADDR}) unless $ethntf->{NETMASK};
-                    },
-                    post => sub {
-                        $ethntf->{ONBOOT} = bool2yesno($onboot);
-                        $ethntf->{NEEDHOSTNAME} = bool2yesno($needhostname);
-                        $ethntf->{PEERDNS} = bool2yesno($peerdns);
-                        $ethntf->{PEERYP} = bool2yesno($peeryp);
-                        $ethntf->{PEERNTPD} = bool2yesno($peerntpd);
-                        $ethntf->{MII_NOT_SUPPORTED} = bool2yesno(!$hotplug);
-                        $ethntf->{HWADDR} = $track_network_id or delete $ethntf->{HWADDR};
-                        #- FIXME: special case for sagem where $ethntf->{DEVICE} is the result of a command
-                        #- we can't always use $ntf_name because of some USB DSL modems
-                        $netc->{$_} = $ntf_name eq "sagem" ? "sagem" : $ethntf->{DEVICE} foreach qw(NET_DEVICE NET_INTERFACE);
-                        if ($auto_ip) {
-                            #- delete gateway settings if gateway device is invalid or if reconfiguring the gateway interface to dhcp
-                            $delete_gateway_settings->($ntf_name);
-                        }
-                        return "static_hostname";
-                    },
-                   },
-
-                   ndiswrapper_select_driver =>
-                   {
-                    pre => sub {
-                        @ndiswrapper_drivers = network::ndiswrapper::installed_drivers();
-                        $ndiswrapper_driver ||= first(@ndiswrapper_drivers);
-                    },
-                    data => sub {
-                        [ { label => N("Choose an ndiswrapper driver"), type => "list", val => \$ndiswrapper_driver, allow_empty_list => 1,
-                            list => [ undef, @ndiswrapper_drivers ],
-                            format => sub { defined $_[0] ? N("Use the ndiswrapper driver %s", $_[0]) : N("Install a new driver") } } ];
-                    },
-                    complete => sub {
-                        $ndiswrapper_driver ||= network::ndiswrapper::ask_driver($in) or return 1;
-                        !$ndiswrapper_do_driver_selection->();
-                    },
-                    post => $ndiswrapper_next_step,
-                   },
-
-                   ndiswrapper_select_device =>
-                   {
-                    data => sub {
-                        [ { label => N("Select a device:"), type => "list", val => \$ndiswrapper_device, allow_empty_list => 1,
-                            list => [ network::ndiswrapper::present_devices($ndiswrapper_driver) ],
-                            format => sub { $_[0]{description} } } ];
-                    },
-                    complete => sub {
-                        !$ndiswrapper_do_device_selection->();
-                    },
-                    post => $ndiswrapper_next_step,
-                   },
-
-                   wireless =>
-                   {
-                    pre => sub {
-                        require network::wireless;
-                        $ethntf->{wireless_eth} = 1;
-                        $netc->{wireless_eth} = 1;
-                        $ethntf->{WIRELESS_MODE} ||= "Managed";
-                        $ethntf->{WIRELESS_ESSID} ||= "any";
-                        ($wireless_enc_key, my $restricted) = network::wireless::get_wep_key_from_iwconfig($ethntf->{WIRELESS_ENC_KEY});
-                        $wireless_enc_mode =
-                          $ethntf->{WIRELESS_WPA_DRIVER} || $ethntf->{WIRELESS_IWPRIV} =~ /WPAPSK/ ? 'wpa-psk' :
-                          !$wireless_enc_key ? 'none' :
-                          $restricted ? 'restricted' :
-                          'open';
-                        $find_lan_module->();
-                        $need_rt2x00_iwpriv = member($module, "rt2400", "rt2500");
-                    },
-                    name => N("Please enter the wireless parameters for this card:"),
-                    data => sub {
-                            [
-                             { label => N("Operating Mode"), val => \$ethntf->{WIRELESS_MODE},
-                               list => [ N_("Ad-hoc"), N_("Managed"), N_("Master"), N_("Repeater"), N_("Secondary"), N_("Auto") ],
-                               format => \&translate },
-                             { label => N("Network name (ESSID)"), val => \$ethntf->{WIRELESS_ESSID} },
-                             { label => N("Network ID"), val => \$ethntf->{WIRELESS_NWID}, advanced => 1 },
-                             { label => N("Operating frequency"), val => \$ethntf->{WIRELESS_FREQ}, advanced => 1 },
-                             { label => N("Sensitivity threshold"), val => \$ethntf->{WIRELESS_SENS}, advanced => 1 },
-                             { label => N("Bitrate (in b/s)"), val => \$ethntf->{WIRELESS_RATE}, advanced => 1 },
-                             { label => N("Encryption mode"), val => \$wireless_enc_mode,
-                               list => [ sort { $wireless_enc_modes{$a} cmp $wireless_enc_modes{$b} } keys %wireless_enc_modes ],
-                               format => sub { $wireless_enc_modes{$_[0]} } },
-                             { label => N("Encryption key"), val => \$wireless_enc_key, disabled => sub { $wireless_enc_mode eq 'none' } },
-                             { label => N("RTS/CTS"), val => \$ethntf->{WIRELESS_RTS}, advanced => 1,
-                               help => N("RTS/CTS adds a handshake before each packet transmission to make sure that the
-channel is clear. This adds overhead, but increase performance in case of hidden
-nodes or large number of active nodes. This parameter sets the size of the
-smallest packet for which the node sends RTS, a value equal to the maximum
-packet size disable the scheme. You may also set this parameter to auto, fixed
-or off.")
-                             },
-                             { label => N("Fragmentation"), val => \$ethntf->{WIRELESS_FRAG}, advanced => 1 },
-                             { label => N("Iwconfig command extra arguments"), val => \$ethntf->{WIRELESS_IWCONFIG}, advanced => 1,
-                               help => N("Here, one can configure some extra wireless parameters such as:
-ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).
-
-See iwconfig(8) man page for further information."),
-                             },
-                             { label =>
-                               #-PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-                               N("Iwspy command extra arguments"), val => \$ethntf->{WIRELESS_IWSPY}, advanced => 1,
-                               help => N("Iwspy is used to set a list of addresses in a wireless network
-interface and to read back quality of link information for each of those.
-
-This information is the same as the one available in /proc/net/wireless :
-quality of the link, signal strength and noise level.
-
-See iwpspy(8) man page for further information."),
- },
-                             if_(!$need_rt2x00_iwpriv,
-                                 { label => N("Iwpriv command extra arguments"), val => \$ethntf->{WIRELESS_IWPRIV}, advanced => 1,
-                                   help => N("Iwpriv enable to set up optionals (private) parameters of a wireless network
-interface.
-
-Iwpriv deals with parameters and setting specific to each driver (as opposed to
-iwconfig which deals with generic ones).
-
-In theory, the documentation of each device driver should indicate how to use
-those interface specific commands and their effect.
-
-See iwpriv(8) man page for further information."),
-                                 })
-                            ];
-                    },
-                    complete => sub {
-                        if ($ethntf->{WIRELESS_FREQ} && $ethntf->{WIRELESS_FREQ} !~ /[0-9.]*[kGM]/) {
-                            $in->ask_warn(N("Error"), N("Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)."));
-                            return 1, 6;
-                        }
-                        if ($ethntf->{WIRELESS_RATE} && $ethntf->{WIRELESS_RATE} !~ /[0-9.]*[kGM]/) {
-                            $in->ask_warn(N("Error"), N("Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)."));
-                            return 1, 8;
-                        }
-                        if (network::wireless::wlan_ng_needed($module) && !$in->do_pkgs->ensure_is_installed('prism2-utils', '/sbin/wlanctl-ng')) {
-                            $in->ask_warn(N("Error"), N("Could not install the %s package!", 'prism2-utils'));
-                            return 1;
-                        }
-                        if ($wireless_enc_mode eq 'wpa-psk' && !$need_rt2x00_iwpriv && !$in->do_pkgs->ensure_is_installed('wpa_supplicant', '/usr/sbin/wpa_supplicant')) {
-                            $in->ask_warn(N("Error"), N("Could not install the %s package!", 'wpa_supplicant'));
-                            return 1;
-                        }
-                    },
-                    post => sub {
-                        delete $ethntf->{WIRELESS_ENC_KEY};
-                        delete $ethntf->{WIRELESS_WPA_DRIVER};
-                        if ($wireless_enc_mode ne 'none') {
-                            #- keep the key even for WPA, so that drakconnect remembers it
-                            $ethntf->{WIRELESS_ENC_KEY} = network::wireless::convert_wep_key_for_iwconfig($wireless_enc_key, $wireless_enc_mode eq 'restricted');
-                        }
-                        if ($need_rt2x00_iwpriv) {
-                            #- use iwpriv for WPA with rt2x00 drivers, they don't plan to support wpa_supplicant
-                            $ethntf->{WIRELESS_IWPRIV} = $wireless_enc_mode eq 'wpa-psk' && qq(set AuthMode=WPAPSK
-set EncrypType=TKIP
-set WPAPSK="$wireless_enc_key"
-set TxRate=0);
-                        } else {
-                            if ($wireless_enc_mode eq 'wpa-psk') {
-                                $ethntf->{WIRELESS_WPA_DRIVER} = network::wireless::wpa_supplicant_get_driver($module);
-                                network::wireless::wpa_supplicant_configure($ethntf->{WIRELESS_ESSID}, $wireless_enc_key);
-                            }
-                        }
-                        network::wireless::wlan_ng_needed($module) and network::wireless::wlan_ng_configure($ethntf->{WIRELESS_ESSID}, $wireless_enc_key, $ethntf->{DEVICE}, $module);
-                        return "lan_protocol";
-                    },
-                   },
-
-
-		   dvb =>
-		   {
-                    name => N("DVB configuration") . "\n\n" . N("Select the network interface to configure:"),
-                    data => [ { label => N("DVB Adapter"), type => "list", val => \$dvb_adapter, allow_empty_list => 1,
-				list => [ modules::probe_category("multimedia/dvb") ], format => sub { $_[0]{description} } } ],
-                    next => "dvb_adapter",
-		   },
-
-
-		   dvb_adapter =>
-		   {
-		    pre => sub {
-			use Fcntl qw(O_RDWR O_NONBLOCK);
-			my $previous_ethntf = find { $is_dvb_interface->($_) } values %$intf;
-			$dvb_ad = $previous_ethntf->{DVB_ADAPTER_ID};
-			$dvb_net = $previous_ethntf->{DVB_NETWORK_DEMUX};
-			$dvb_pid = $previous_ethntf->{DVB_NETWORK_PID};
-			if (my $device = find { sysopen(undef, $_, O_RDWR | O_NONBLOCK) } glob("/dev/dvb/adapter*/net*")) {
-			    ($dvb_ad, $dvb_net) = $device =~ m,/dev/dvb/adapter(\d+)/net(\d+),;
-			}
-		    },
-		    name => N("DVB adapter settings"),
-		    data => sub {
-                            [
-			     { label => N("Adapter card"), val => \$dvb_ad },
-                             { label => N("Net demux"), val => \$dvb_net },
-                             { label => N("PID"), val => \$dvb_pid },
-			    ];
-			},
-		    post => sub {
-			$ntf_name = 'dvb' . $dvb_ad . '_' . $dvb_net;
-			$ethntf = $intf->{$ntf_name} ||= {};
-			$ethntf->{DEVICE} = $ntf_name;
-			$ethntf->{DVB_ADAPTER_ID} = qq("$dvb_ad");
-			$ethntf->{DVB_NETWORK_DEMUX} = qq("$dvb_net");
-			$ethntf->{DVB_NETWORK_PID} = qq("$dvb_pid");
-			return "lan_protocol";
-		    },
-		   },
-
-                   static_hostname =>
-                   {
-                    pre => sub {
-                        if ($ethntf->{IPADDR}) {
-                            $netc->{dnsServer} ||= dns($ethntf->{IPADDR});
-                            $gateway_ex = gateway($ethntf->{IPADDR});
-                            # $netc->{GATEWAY} ||= gateway($ethntf->{IPADDR});
-                            if ($ntf_name eq "sagem") {
-                              my @sagem_ip = split(/\./, $ethntf->{IPADDR});
-                              $sagem_ip[3] = 254;
-                              $netc->{GATEWAY} = join(".", @sagem_ip);
-                            }
-                        }
-                    },
-                    name => N("Please enter your host name.
-Your host name should be a fully-qualified host name,
-such as ``mybox.mylab.myco.com''.
-You may also enter the IP address of the gateway if you have one.") .
- " " . # better looking text (to be merged into texts since some languages (eg: ja) doesn't need it
-N("Last but not least you can also type in your DNS server IP addresses."),
-                    data => sub {
-                        [ { label => $auto_ip ? N("Host name (optional)") : N("Host name"), val => \$netc->{HOSTNAME} },
-                          if_(!$auto_ip, 
-                              { label => N("DNS server 1"),  val => \$netc->{dnsServer} },
-                              { label => N("DNS server 2"),  val => \$netc->{dnsServer2} },
-                              { label => N("DNS server 3"),  val => \$netc->{dnsServer3} },
-                              { label => N("Search domain"), val => \$netc->{DOMAINNAME}, 
-                                help => N("By default search domain will be set from the fully-qualified host name") },
-                              { label => N("Gateway (e.g. %s)", $gateway_ex), val => \$netc->{GATEWAY} },
-                              if_(@all_cards > 1,
-                                  { label => N("Gateway device"), val => \$netc->{GATEWAYDEV}, list => [ N_("None"), sort keys %all_eth_intf ],
-                                    format => sub { $all_eth_intf{$_[0]} || translate($_[0]) } },
-                                 ),
-                             ),
-                        ];
-                    },
-                    complete => sub {
-                        foreach my $dns (qw(dnsServer dnsServer2 dnsServer3)) {
-                            if ($netc->{$dns} && !is_ip($netc->{$dns})) {
-                                $in->ask_warn(N("Error"), N("DNS server address should be in format 1.2.3.4"));
-                                return 1;
-                            }
-                        }
-                        if ($netc->{GATEWAY} && !is_ip($netc->{GATEWAY})) {
-                            $in->ask_warn(N("Error"), N("Gateway address should be in format 1.2.3.4"));
-                            return 1;
-                        }
-                    },
-                    post => sub {
-                        $netc->{GATEWAYDEV} eq "None" and delete $netc->{GATEWAYDEV};
-                        return "zeroconf";
-                    }
-                   },
-
-
-                   zeroconf =>
-                   {
-                    name => N("If desired, enter a Zeroconf hostname.
-This is the name your machine will use to advertise any of
-its shared resources that are not managed by the network.
-It is not necessary on most networks."),
-                    data => [ { label => N("Zeroconf Host name"), val => \$netc->{ZEROCONF_HOSTNAME} } ],
-                    complete => sub {
-                        if ($netc->{ZEROCONF_HOSTNAME} =~ /\./) {
-                            $in->ask_warn(N("Error"), N("Zeroconf host name must not contain a ."));
-                            return 1;
-                        }
-                    },
-                    post => $handle_multiple_cnx,
-                   },
-
-
-                   multiple_internet_cnx =>
-                   {
-                    name => N("You have configured multiple ways to connect to the Internet.\nChoose the one you want to use.\n\n") . if_(!$::isStandalone, "You may want to configure some profiles after the installation, in the Mandriva Control Center"),
-                    data => sub {
-                        [ { label => N("Internet connection"), val => \$netc->{internet_cnx_choice},
-                            list => [ keys %{$netc->{internet_cnx}} ] } ];
-                    },
-                    post => $save_cnx,
-                   },
-
-
-                   apply_settings =>
-                   {
-                    name => N("Configuration is complete, do you want to apply settings?"),
-                    type => "yesorno",
-                   },
-
-
-                   allow_user_ctl =>
-                   {
-                    name => N("Do you want to allow users to start the connection?"),
-                    type => "yesorno",
-                    default => sub { bool2yesno(text2bool($intf->{$netc->{NET_INTERFACE}}{USERCTL})) },
-                    post => sub {
-                        my ($res) = @_;
-                        $res = bool2yesno($res);
-                        $intf->{$netc->{NET_INTERFACE}}{USERCTL} = $res;
-                        my $ifcfg_file = "$::prefix/etc/sysconfig/network-scripts/ifcfg-$netc->{NET_INTERFACE}";
-                        -f $ifcfg_file and substInFile { s/^USERCTL.*\n//; $_ .= qq(USERCTL=$res\n) if eof } $ifcfg_file;
-                        return $goto_start_on_boot_ifneeded->();
-                    },
-                   },
-
-
-                   network_on_boot =>
-                   {
-                    pre => sub {
-                        # condition is :
-                        member($netc->{internet_cnx_choice}, ('adsl', 'isdn')); # and $netc->{at_boot} = $in->ask_yesorno(N("Network Configuration Wizard"), N("Do you want to start the connection at boot?"));
-                    },
-                    name => N("Do you want to start the connection at boot?"),
-                    type => "yesorno",
-                    default => sub { ($type eq 'modem' ? 'no' : 'yes') },
-                    post => sub {
-                        my ($res) = @_;
-                        $netc->{at_boot} = $res;
-                        $res = bool2yesno($res);
-                        $ethntf->{ONBOOT} = $res if $netcnx->{type} eq 'adsl' && member($adsl_type, qw(manual dhcp));
-                        my $ifcfg_file = "$::prefix/etc/sysconfig/network-scripts/ifcfg-$netc->{NET_INTERFACE}";
-                        -f $ifcfg_file and substInFile { s/^ONBOOT.*\n//; $_ .= qq(ONBOOT=$res\n) if eof } $ifcfg_file;
-                        return $after_start_on_boot_step->();
-                    },
-                   },
-
-
-                   isdn_dial_on_boot =>
-                   {
-                    pre => sub {
-                        $intf->{ippp0} ||= { DEVICE => "ippp0" }; # we want the ifcfg-ippp0 file to be written
-                        @isdn_dial_methods = ({ name => N("Automatically at boot"),
-                                                ONBOOT => 1, DIAL_ON_IFUP => 1 },
-                                              { name => N("By using Net Applet in the system tray"),
-                                                ONBOOT => 0, DIAL_ON_IFUP => 1 },
-                                              { name => N("Manually (the interface would still be activated at boot)"),
-                                               ONBOOT => 1, DIAL_ON_IFUP => 0 });
-                        my $method =  find {
-                            $_->{ONBOOT} eq text2bool($intf->{ippp0}{ONBOOT}) &&
-                              $_->{DIAL_ON_IFUP} eq text2bool($intf->{ippp0}{DIAL_ON_IFUP});
-                        } @isdn_dial_methods;
-                        #- use net_applet by default
-                        $isdn->{dial_method} = $method->{name} || $isdn_dial_methods[1]{name};
-                    },
-                    name => N("How do you want to dial this connection?"),
-                    data => sub {
-                        [ { type => "list", val => \$isdn->{dial_method}, list => [ map { $_->{name} } @isdn_dial_methods ] } ];
-                    },
-                    post => sub {
-                        my $method = find { $_->{name} eq $isdn->{dial_method} } @isdn_dial_methods;
-                        $intf->{ippp0}{$_} = bool2yesno($method->{$_}) foreach qw(ONBOOT DIAL_ON_IFUP);
-                        return $after_start_on_boot_step->();
-                    },
-                   },
-
-
-                   restart =>
-                   {
-                    name => N("The network needs to be restarted. Do you want to restart it?"),
-                    type => "yesorno",
-                    post => sub {
-                        my ($a) = @_;
-                        network::ethernet::write_ether_conf($in, $modules_conf, $netcnx, $netc, $intf) if $netcnx->{type} eq 'lan';
-                        if ($a && !$::testing && !run_program::rooted($::prefix, "/etc/rc.d/init.d/network restart")) {
-                            $success = 0;
-                            $in->ask_okcancel(N("Network Configuration"),
-                                              N("A problem occurred while restarting the network: \n\n%s", `/etc/rc.d/init.d/network restart`), 0);
-                        }
-                        return $offer_to_connect->();
-                    },
-                   },
-
-
-                   ask_connect_now =>
-                   {
-                    name => N("Do you want to try to connect to the Internet now?"),
-                    type => "yesorno",
-                    post => sub {
-                        my ($a) = @_;
-                        my $type = $netc->{internet_cnx_choice};
-                        $up = 1;
-                        if ($a) {
-                            # local $::isWizard = 0;
-                            my $_w = $in->wait_message('', N("Testing your connection..."), 1);
-                            disconnect_backend($netc);
-                            sleep 1;
-                            connect_backend($netc);
-                            my $s = 30;
-                            $type =~ /modem/ and $s = 50;
-                            $type =~ /adsl/ and $s = 35;
-                            $type =~ /isdn/ and $s = 20;
-                            sleep $s;
-                            $up = connected();
-                        }
-                        $success = $up;
-                        return $a ? "disconnect" : "end";
-                    }
-                   },
-
-
-                   disconnect =>
-                   {
-                    name => sub {
-                        $up ? N("The system is now connected to the Internet.") .
-                          if_($::isInstall, N("For security reasons, it will be disconnected now.")) :
-                            N("The system does not seem to be connected to the Internet.
-Try to reconfigure your connection.");
-                    },
-                    no_back => 1,
-                    end => 1,
-                    post => sub {
-                        $::isInstall and disconnect_backend($netc);
-                        return "end";
-                    },
-                   },
-
-
-                   end =>
-                   {
-                    name => sub {
-                        return $success ? join('', N("Congratulations, the network and Internet configuration is finished.
-
-"), if_($::isStandalone && $in->isa('interactive::gtk'),
-        N("After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."))) :
-          N("Problems occurred during configuration.
-Test your connection via net_monitor or mcc. If your connection does not work, you might want to relaunch the configuration.");
-                    },
-                           end => 1,
-                   },
-                  },
-        };
-
-      my $use_wizard = 1;
-      if ($::isInstall) {
-          if ($first_time && $in->{method} =~ /^(ftp|http|nfs)$/) {
-              local $::isWizard;
-              !$::expert && !$o_noauto || $in->ask_okcancel(N("Network Configuration"),
-                                                            N("Because you are doing a network installation, your network is already configured.
-Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
-"), 1)
-                and do {
-                    $netcnx->{type} = 'lan';
-                    $netc->{$_} = 'eth0' foreach qw(NET_DEVICE NET_INTERFACE);
-                    $use_wizard = 0;
-                };
-        }
-      }
-
-      if ($use_wizard) {
-          require wizards;
-          $wiz->{var} = {
-                         netc  => $netc,
-                         mouse => $mouse,
-                         intf  => $intf,
-                        };
-          wizards->new->process($wiz, $in);
-      }
-
-    # install needed packages:
-    $network_configured or network::network::configureNetwork2($in, $modules_conf, $::prefix, $netc, $intf);
-
-    $netcnx->{$_} = $netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
-    $netcnx->{type} =~ /adsl/ or run_program::rooted($::prefix, "/chkconfig --del adsl 2> /dev/null");
-}
-
-sub main {
-    my ($netcnx, $in, $modules_conf, $o_netc, $o_mouse, $o_intf, $o_first_time, $o_noauto) = @_;
-    eval { real_main($netcnx, $in, $modules_conf, $o_netc, $o_mouse, $o_intf, $o_first_time, $o_noauto) };
-    my $err = $@;
-    if ($err) { # && $in->isa('interactive::gtk')
-	$err =~ /wizcancel/ and $in->exit(0);
-
-	local $::isEmbedded = 0; # to prevent sub window embedding
-        local $::isWizard = 0 if !$::isInstall; # to prevent sub window embedding
-        #err_dialog(N("Error"), N("An unexpected error has happened:\n%s", $err));
-        $in->ask_warn(N("Error"), N("An unexpected error has happened:\n%s", $err));
-    }
-}
-
-sub set_profile {
-    my ($netcnx) = @_;
-    system('/sbin/set-netprofile', $netcnx->{PROFILE});
-    log::explanations(qq(Switching to "$netcnx->{PROFILE}" profile));
-}
-
-sub save_profile {
-    my ($netcnx) = @_;
-    system('/sbin/save-netprofile', $netcnx->{PROFILE});
-    log::explanations(qq(Saving "$netcnx->{PROFILE}" profile));
-}
-
-sub del_profile {
-    my ($profile) = @_;
-    return if !$profile || $profile eq "default";
-    rm_rf("$::prefix/etc/netprofile/profiles/$profile");
-    log::explanations(qq(Deleting "$profile" profile));
-}
-
-sub add_profile {
-    my ($netcnx, $profile) = @_;
-    return if !$profile || $profile eq "default" || member($profile, get_profiles());
-    system('/sbin/clone-netprofile', $netcnx->{PROFILE}, $profile);
-    log::explanations(qq("Creating "$profile" profile));
-}
-
-sub get_profiles() {
-    map { if_(m!([^/]*)/$!, $1) } glob("$::prefix/etc/netprofile/profiles/*/");
-}
-
-sub read_net_conf {
-    my ($netcnx, $netc, $intf) = @_;
-    my $current = { getVarsFromSh("$::prefix/etc/netprofile/current") };
-
-    $netcnx->{PROFILE} = $current->{PROFILE} || 'default';
-    network::network::read_all_conf($::prefix, $netc, $intf, $netcnx);
-
-    foreach ('NET_DEVICE', 'NET_INTERFACE') {
-        $netc->{$_} = $netcnx->{$_} if $netcnx->{$_};
-    }
-    $netcnx->{$netcnx->{type}} ||= {} if $netcnx->{type};
-}
-
-sub start_internet {
-    my ($o) = @_;
-    init_globals($o);
-    #- give a chance for module to be loaded using kernel-BOOT modules...
-    $::isStandalone or modules::load_category($o->{modules_conf}, 'network/*');
-    connect_backend($o->{netc});
-}
-
-sub stop_internet {
-    my ($o) = @_;
-    init_globals($o);
-    disconnect_backend($o->{netc});
-}
-
-1;
-
-=head1 network::netconnect::detect()
-
-=head2 example of usage
-
-use lib qw(/usr/lib/libDrakX);
-use network::netconnect;
-use Data::Dumper;
-
-use class_discard;
-
-local $in = class_discard->new;
-
-network::netconnect::init_globals($in);
-my %i;
-network::netconnect::detect($modules_conf, \%i);
-print Dumper(\%i),"\n";
-
-=cut
diff --git a/perl-install/network/network.pm b/perl-install/network/network.pm
deleted file mode 100644
index 5f90dcdaa..000000000
--- a/perl-install/network/network.pm
+++ /dev/null
@@ -1,529 +0,0 @@
-package network::network; # $Id$wir
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-
-use strict;
-
-use Socket;
-use common;
-use detect_devices;
-use run_program;
-use network::tools;
-use any;
-use vars qw(@ISA @EXPORT);
-use log;
-
-@ISA = qw(Exporter);
-@EXPORT = qw(add2hosts addDefaultRoute configureNetwork2 dns dnsServers findIntf gateway guessHostname is_ip is_ip_forbidden masked_ip netmask read_all_conf read_conf read_interface_conf read_resolv_conf resolv sethostname write_conf write_resolv_conf);
-
-#-######################################################################################
-#- Functions
-#-######################################################################################
-sub read_conf {
-    my ($file) = @_;
-    +{ getVarsFromSh($file) };
-}
-
-sub read_resolv_conf_raw {
-    my ($o_file) = @_;
-    my $s = cat_($o_file || "$::prefix/etc/resolv.conf");
-    { nameserver => [ $s =~ /^\s*nameserver\s+(\S+)/mg ],
-      search => [ if_($s =~ /^\s*search\s+(.*)/m, split(' ', $1)) ] };
-}
-
-sub read_resolv_conf {
-    my ($o_file) = @_;
-    my $resolv_conf = read_resolv_conf_raw($o_file);
-    +{
-      (mapn { $_[0] => $_[1] } [ qw(dnsServer dnsServer2 dnsServer3) ], $resolv_conf->{nameserver}),
-      (mapn { $_[0] => $_[1] } [ qw(DOMAINNAME DOMAINNAME2 DOMAINNAME3) ], $resolv_conf->{search}),
-     };
-}
-
-sub read_interface_conf {
-    my ($file) = @_;
-    my %intf = getVarsFromSh($file);
-
-    $intf{BOOTPROTO} ||= 'static';
-    $intf{isPtp} = $intf{NETWORK} eq '255.255.255.255';
-    $intf{isUp} = 1;
-    \%intf;
-}
-
-sub read_tmdns_conf() {
-    my $file = "$::prefix/etc/tmdns.conf";
-    cat_($file) =~ /^\s*hostname\s*=\s*(\w+)/m && { ZEROCONF_HOSTNAME => $1 };
-}
-
-sub write_conf {
-    my ($netc) = @_;
-    my $file = "$::prefix/etc/sysconfig/network";
-
-    if ($netc->{HOSTNAME} && $netc->{HOSTNAME} =~ /\.(.+)$/) {
-	$netc->{DOMAINNAME} = $1;
-    }
-    $netc->{NETWORKING} = 'yes';
-
-    setVarsInSh($file, $netc, qw(HOSTNAME NETWORKING GATEWAY GATEWAYDEV NISDOMAIN));
-}
-
-sub write_zeroconf {
-    my ($file, $zhostname) = @_;
-    eval { substInFile { s/^\s*(hostname)\s*=.*/$1 = $zhostname/ } $file };
-}
-
-sub write_resolv_conf {
-    my ($file, $netc) = @_;
-
-    my %new = (
-        search => [ grep { $_ } uniq(@$netc{'DOMAINNAME', 'DOMAINNAME2', 'DOMAINNAME3'}) ],
-        nameserver => [ grep { $_ } uniq(@$netc{'dnsServer', 'dnsServer2', 'dnsServer3'}) ],
-    );
-
-    my (%prev, @unknown);
-    foreach (cat_($file)) {
-	s/\s+$//;
-	s/^[#\s]*//;
-
-	if (my ($key, $val) = /^(search|nameserver)\s+(.*)$/) {
-	    push @{$prev{$key}}, $val;
-	} elsif (/^ppp temp entry$/) {
-	} elsif (/\S/) {
-	    push @unknown, $_;
-	}
-    }
-    unlink $file if -l $file;  #- workaround situation when /etc/resolv.conf is an absolute link to /etc/ppp/resolv.conf or whatever
-
-    if (@{$new{search}} || @{$new{nameserver}}) {
-	$prev{$_} = [ difference2($prev{$_} || [], $new{$_}) ] foreach keys %new;
-
-	my @search = do {
-	    my @new = if_(@{$new{search}}, "search " . join(' ', @{$new{search}}) . "\n");
-	    my @old = if_(@{$prev{search}}, "# search " . join(' ', @{$prev{search}}) . "\n");
-	    @new, @old;
-	};
-	my @nameserver = do {
-	    my @new = map { "nameserver $_\n" } @{$new{nameserver}};
-	    my @old = map { "# nameserver $_\n" } @{$prev{nameserver}};
-	    @new, @old;
-	};
-	output_with_perm($file, 0644, @search, @nameserver, (map { "# $_\n" } @unknown), "\n# ppp temp entry\n");
-
-	#-res_init();		# reinit the resolver so DNS changes take affect
-	1;
-    } else {
-	log::explanations("neither domain name nor dns server are configured");
-	0;
-    }
-}
-
-sub update_broadcast_and_network {
-    my ($intf) = @_;
-    my @ip = split '\.', $intf->{IPADDR};
-    my @mask = split '\.', $intf->{NETMASK};
-    $intf->{BROADCAST} = join('.', mapn { int($_[0]) | ((~int($_[1])) & 255) } \@ip, \@mask);
-    $intf->{NETWORK} = join('.', mapn { int($_[0]) &        $_[1]          } \@ip, \@mask);
-}
-
-sub write_interface_conf {
-    my ($file, $intf, $_netc, $_prefix) = @_;
-
-    require network::ethernet;
-    my (undef, $mac_address) = network::ethernet::get_eth_card_mac_address($intf->{DEVICE}); 
-    $intf->{HWADDR} &&= $mac_address; #- set HWADDR to MAC address if required
-
-    update_broadcast_and_network($intf);
-    $intf->{ONBOOT} ||= bool2yesno(!member($intf->{DEVICE}, map { $_->{device} } detect_devices::pcmcia_probe()));
-
-    defined($intf->{METRIC}) or $intf->{METRIC} = network::tools::get_default_metric(network::tools::get_interface_type($intf)),
-    $intf->{BOOTPROTO} =~ s/dhcp.*/dhcp/;
-
-    setVarsInSh($file, $intf, qw(DEVICE BOOTPROTO IPADDR NETMASK NETWORK BROADCAST ONBOOT HWADDR METRIC MII_NOT_SUPPORTED TYPE USERCTL ATM_ADDR),
-                qw(WIRELESS_MODE WIRELESS_ESSID WIRELESS_NWID WIRELESS_FREQ WIRELESS_SENS WIRELESS_RATE WIRELESS_ENC_KEY WIRELESS_RTS WIRELESS_FRAG WIRELESS_IWCONFIG WIRELESS_IWSPY WIRELESS_IWPRIV WIRELESS_WPA_DRIVER),
-                qw(DVB_ADAPTER_ID DVB_NETWORK_DEMUX DVB_NETWORK_PID),
-                if_($intf->{BOOTPROTO} eq "dhcp", qw(DHCP_CLIENT DHCP_HOSTNAME NEEDHOSTNAME PEERDNS PEERYP PEERNTPD DHCP_TIMEOUT)),
-                if_($intf->{DEVICE} =~ /^ippp\d+$/, qw(DIAL_ON_IFUP))
-               );
-    substInFile { s/^DEVICE='(`.*`)'/DEVICE=$1/g } $file; #- remove quotes if DEVICE is the result of a command
-
-    chmod $intf->{WIRELESS_ENC_KEY} ? 0700 : 0755, $file; #- hide WEP key for non-root users
-    log::explanations("written $intf->{DEVICE} interface configuration in $file");
-}
-
-sub add2hosts {
-    my ($file, $hostname, @ips) = @_;
-    my ($sub_hostname) = $hostname =~ /(.*?)\./;
-
-    my %l;
-    foreach (cat_($file)) {
-        my ($ip, $aliases) = /^\s*(\S+)\s+(\S+.*)$/ or next;
-        push @{$l{$ip}}, difference2([ split /\s+/, $aliases ], [ $hostname, $sub_hostname ]);
-    } cat_($file);
-
-    push @{$l{$_}}, $hostname, if_($sub_hostname, $sub_hostname) foreach grep { $_ } @ips;
-
-    log::explanations("writing host information to $file");
-    output($file, map { "$_\t\t" . join(" ", @{$l{$_}}) . "\n" } keys %l);
-}
-
-# The interface/gateway needs to be configured before this will work!
-sub guessHostname {
-    my ($_prefix, $netc, $intf) = @_;
-
-    $intf->{isUp} && dnsServers($netc) or return 0;
-    $netc->{HOSTNAME} && $netc->{DOMAINNAME} and return 1;
-
-    write_resolv_conf("$::prefix/etc/resolv.conf", $netc);
-
-    my $name = gethostbyaddr(Socket::inet_aton($intf->{IPADDR}), Socket::AF_INET()) or log::explanations("reverse name lookup failed"), return 0;
-
-    log::explanations("reverse name lookup worked");
-
-    add2hash($netc, { HOSTNAME => $name });
-    1;
-}
-
-sub addDefaultRoute {
-    my ($netc) = @_;
-    c::addDefaultRoute($netc->{GATEWAY}) if $netc->{GATEWAY};
-}
-
-sub sethostname {
-    my ($netc) = @_;
-    my $text;
-    syscall_("sethostname", $netc->{HOSTNAME}, length $netc->{HOSTNAME}) ? ($text="set sethostname to $netc->{HOSTNAME}") : ($text="sethostname failed: $!");
-    log::explanations($text);
-
-    if (!$::isInstall) {
-      run_program::run("/usr/bin/run-parts", "--arg", $netc->{HOSTNAME}, "/etc/sysconfig/network-scripts/hostname.d");
-    }
-}
-
-sub resolv($) {
-    my ($name) = @_;
-    is_ip($name) and return $name;
-    my $a = join(".", unpack "C4", (gethostbyname $name)[4]);
-    #-log::explanations("resolved $name in $a");
-    $a;
-}
-
-sub dnsServers {
-    my ($netc) = @_;
-    my %used_dns; @used_dns{$netc->{dnsServer}, $netc->{dnsServer2}, $netc->{dnsServer3}} = (1, 2, 3);
-    sort { $used_dns{$a} <=> $used_dns{$b} } grep { $_ } keys %used_dns;
-}
-
-sub findIntf {
-    my ($intf, $device) = @_;
-    $intf->{$device}{DEVICE} = undef;
-    $intf->{$device};
-}
-
-my $ip_regexp = qr/^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/;
-
-sub is_ip {
-    my ($ip) = @_;
-    my @fields = $ip =~ $ip_regexp or return;
-    every { 0 <= $_ && $_ <= 255 } @fields or return;
-    @fields;
-}
-
-sub ip_compare {
-    my ($ip1, $ip2) = @_;
-    my (@ip1_fields) = $ip1 =~ $ip_regexp;
-    my (@ip2_fields) = $ip2 =~ $ip_regexp;
-    
-    every { $ip1_fields[$_] eq $ip2_fields[$_] } (0 .. 3);
-}
-
-sub is_ip_forbidden {
-    my ($ip) = @_;
-    my @forbidden = ('127.0.0.1', '255.255.255.255');
-    
-    any { ip_compare($ip, $_) } @forbidden;
-}
-
-sub is_domain_name {
-    my ($name) = @_;
-    my @fields = split /\./, $name;
-    $name !~ /\.$/ && @fields > 0 && @fields == grep { /^[[:alnum:]](?:[\-[:alnum:]]{0,61}[[:alnum:]])?$/ } @fields;
-}
-
-sub netmask {
-    my ($ip) = @_;
-    return "255.255.255.0" unless is_ip($ip);
-    $ip =~ $ip_regexp or warn "IP_regexp failed\n" and return "255.255.255.0";
-    if ($1 >= 1 && $1 < 127) {
-	"255.0.0.0";    #-1.0.0.0 to 127.0.0.0
-    } elsif ($1  >= 128 && $1 <= 191) {
-	"255.255.0.0";  #-128.0.0.0 to 191.255.0.0
-    } elsif ($1 >= 192 && $1 <= 223) {
-	"255.255.255.0";
-    } else {
-	"255.255.255.255"; #-experimental classes
-    }
-}
-
-sub masked_ip {
-    my ($ip) = @_;
-    my @ip = is_ip($ip) or return '';
-    my @mask = netmask($ip) =~ $ip_regexp;
-    for (my $i = 0; $i < @ip; $i++) {
-	$ip[$i] &= int $mask[$i];
-    }
-    join(".", @ip);
-}
-
-sub dns {
-    my ($ip) = @_;
-    my @masked = masked_ip($ip) =~ $ip_regexp;
-    $masked[3]  = 2;
-    join(".", @masked);
-
-}
-
-sub gateway {
-    my ($ip) = @_;
-    my @masked = masked_ip($ip) =~ $ip_regexp;
-    $masked[3]  = 1;
-    join(".", @masked);
-}
-
-sub miscellaneous_choose {
-    my ($in, $u) = @_;
-
-    $in->ask_from('',
-       N("Proxies configuration"),
-       [ { label => N("HTTP proxy"), val => \$u->{http_proxy} },
-         { label => N("FTP proxy"),  val => \$u->{ftp_proxy} },
-       ],
-       complete => sub {
-	   $u->{http_proxy} =~ m,^($|http://), or $in->ask_warn('', N("Proxy should be http://...")), return 1,0;
-	   $u->{ftp_proxy} =~ m,^($|ftp://|http://), or $in->ask_warn('', N("URL should begin with 'ftp:' or 'http:'")), return 1,1;
-	   0;
-       }
-    ) or return;
-    1;
-}
-
-sub proxy_configure {
-    my ($u) = @_;
-    setExportedVarsInSh("$::prefix/etc/profile.d/proxy.sh",  $u, qw(http_proxy ftp_proxy));
-    chmod 0755, "$::prefix/etc/profile.d/proxy.sh";
-    setExportedVarsInCsh("$::prefix/etc/profile.d/proxy.csh", $u, qw(http_proxy ftp_proxy));
-    chmod 0755, "$::prefix/etc/profile.d/proxy.csh";
-
-    #- KDE proxy settings
-    my $kde_config_dir = "$::prefix/usr/share/config";
-    my $kde_config_file = "$kde_config_dir/kioslaverc";
-    if (-d $kde_config_dir) {
-        update_gnomekderc($kde_config_file,
-                          undef,
-                          PersistentProxyConnection => "false"
-                      );
-        update_gnomekderc($kde_config_file,
-                          "Proxy Settings",
-                          AuthMode => 0,
-                          ProxyType => $u->{http_proxy} || $u->{ftp_proxy} ? 4 : 0,
-                          ftpProxy => "ftp_proxy",
-                          httpProxy => "http_proxy",
-                          httpsProxy => "http_proxy"
-                  );
-    }
-
-    #- Gnome proxy settings
-    if (-d "$::prefix/etc/gconf/2/") {
-        my $defaults_dir = "/etc/gconf/gconf.xml.local-defaults";
-        my $p_defaults_dir = "$::prefix$defaults_dir";
-        my $p_defaults_path = "$::prefix/etc/gconf/2/local-defaults.path";
-        -r $p_defaults_path or output_with_perm($p_defaults_path, 0755, qq(
-# System local settings
-xml:readonly:$defaults_dir
-));
-        -d $p_defaults_dir or mkdir $p_defaults_dir, 0755;
-
-        my $use_alternate_proxy;
-        my $gconf_set = sub {
-            my ($key, $type, $value) = @_;
-            #- gconftool-2 is available since /etc/gconf/2/ exists
-            system("gconftool-2", "--config-source=xml::$p_defaults_dir", "--direct", "--set", "--type=$type", $key, $value);
-        };
-
-        #- http proxy
-        if (my ($user, $password, $host, $port) = $u->{http_proxy} =~ m,^http://(?:([^:\@]+)(?::([^:\@]+))?\@)?([^\:]+)(?::(\d+))?$,) {
-            $port ||= 80;
-            $gconf_set->("/system/http_proxy/use_http_proxy", "bool", 1);
-            $gconf_set->("/system/http_proxy/host", "string", $host);
-            $gconf_set->("/system/http_proxy/port", "int", $port);
-            $gconf_set->("/system/http_proxy/use_authentication", "bool", to_bool($user));
-            $user and $gconf_set->("/system/http_proxy/authentication_user", "string", $user);
-            $password and $gconf_set->("/system/http_proxy/authentication_password", "string", $password);
-
-            #- https proxy (ssl)
-            $gconf_set->("/system/proxy/secure_host", "string", $host);
-            $gconf_set->("/system/proxy/secure_port", "int", $port);
-            $use_alternate_proxy = 1;
-        } else {
-            $gconf_set->("/system/http_proxy/use_http_proxy", "bool", 0);
-            #- clear the ssl host so that it isn't used if the manual proxy is activated for ftp
-            $gconf_set->("/system/proxy/secure_host", "string", "");
-        }
-
-        #- ftp proxy
-        if (my ($host, $port) = $u->{ftp_proxy} =~ m,^(?:http|ftp)://(?:[^:\@]+(?::[^:\@]+)?\@)?([^\:]+)(?::(\d+))?$,) {
-            $port ||= 21;
-            $gconf_set->("/system/proxy/mode", "string", "manual");
-            $gconf_set->("/system/proxy/ftp_host", "string", $host);
-            $gconf_set->("/system/proxy/ftp_port",  "int", $port);
-            $use_alternate_proxy = 1;
-        } else {
-            #- clear the ftp host so that it isn't used if the manual proxy is activated for ssl
-            $gconf_set->("/system/proxy/ftp_host", "string", "");
-        }
-
-        #- set proxy mode to manual if either https or ftp is used
-        $gconf_set->("/system/proxy/mode", "string", $use_alternate_proxy ? "manual" : "none");
-
-        #- make gconf daemons reload their settings
-        system("killall -s HUP gconfd-2");
-    }
-}
-
-sub read_all_conf {
-    my ($_prefix, $netc, $intf, $o_netcnx) = @_;
-    $netc ||= {}; $intf ||= {};
-    my $netcnx = $o_netcnx || {};
-    add2hash($netc, read_conf("$::prefix/etc/sysconfig/network")) if -r "$::prefix/etc/sysconfig/network";
-    add2hash($netc, read_resolv_conf());
-    add2hash($netc, read_tmdns_conf());
-    foreach (all("$::prefix/etc/sysconfig/network-scripts")) {
-	my ($device) = /^ifcfg-([A-Za-z0-9.:_-]+)$/;
-	next if $device =~ /.rpmnew$|.rpmsave$/;
-	if ($device && $device ne 'lo') {
-	    my $intf = findIntf($intf, $device);
-	    add2hash($intf, { getVarsFromSh("$::prefix/etc/sysconfig/network-scripts/$_") });
-	    $intf->{DEVICE} ||= $device;
-	}
-    }
-    if (my $default_intf = network::tools::get_default_gateway_interface($netc, $intf)) {
-        $netcnx->{type} ||= network::tools::get_interface_type($intf->{$default_intf});
-    }
-}
-
-#- FIXME: this is buggy, use network::tools::get_default_gateway_interface
-sub probe_netcnx_type {
-    my ($_prefix, $_netc, $intf, $netcnx) = @_;
-    #- try to probe $netcnx->{type} which is used almost everywhere.
-    unless ($netcnx->{type}) {
-	#- ugly hack to determine network type (avoid saying not configured in summary).
-	-e "$::prefix/etc/ppp/peers/adsl" and $netcnx->{type} ||= 'adsl'; # enough ?
-	-e "$::prefix/etc/ppp/ioptions1B" || -e "$::prefix/etc/ppp/ioptions2B" and $netcnx->{type} ||= 'isdn'; # enough ?
-	$intf->{ppp0} and $netcnx->{type} ||= 'modem';
-	$intf->{eth0} and $netcnx->{type} ||= 'lan';
-    }
-}
-
-sub easy_dhcp {
-    my ($modules_conf, $netc, $intf) = @_;
-
-    return if text2bool($netc->{NETWORKING});
-
-    require modules;
-    require network::ethernet;
-    modules::load_category($modules_conf, list_modules::ethernet_categories());
-    my @all_dev = sort map { $_->[0] } network::ethernet::get_eth_cards($modules_conf);
-
-    #- only for a single ethernet network card
-    my @ether_dev = grep { /^eth[0-9]+$/ && `LC_ALL= LANG= $::prefix/sbin/ip -o link show $_ 2>/dev/null` =~ m|\slink/ether\s| } @all_dev;
-    @ether_dev == 1 or return;
-
-    my $dhcp_intf = $ether_dev[0];
-    log::explanations("easy_dhcp: found $dhcp_intf");
-
-    put_in_hash($netc, {
-			NETWORKING => "yes",
-			DHCP => "yes",
-			NET_DEVICE => $dhcp_intf,
-			NET_INTERFACE => $dhcp_intf,
-		       });
-    $intf->{$dhcp_intf} ||= {};
-    put_in_hash($intf->{$dhcp_intf}, {
-				      DEVICE => $dhcp_intf,
-				      BOOTPROTO => 'dhcp',
-				      NETMASK => '255.255.255.0',
-				      ONBOOT => 'yes'
-				     });
-    1;
-}
-
-#- configureNetwork2 : configure the network interfaces.
-#- input
-#-  $prefix
-#-  $netc
-#-  $intf
-#- $netc input
-#-  NETWORKING : networking flag : string : "yes" by default
-#-  FORWARD_IPV4 : forward IP flag : string : "false" by default
-#-  HOSTNAME : hostname : string : "localhost.localdomain" by default
-#-  DOMAINNAME : domainname : string : $netc->{HOSTNAME} =~ /\.(.*)/ by default
-#-  DOMAINNAME2 : well it's another domainname : have to look further why we used 2
-#-  The following are facultatives
-#-  DHCP_HOSTNAME : If you have a dhcp and want to set the hostname
-#-  GATEWAY : gateway
-#-  GATEWAYDEV : gateway interface
-#-  NISDOMAIN : nis domain
-#-  $netc->{dnsServer} : dns server 1
-#-  $netc->{dnsServer2} : dns server 2
-#-  $netc->{dnsServer3} : dns server 3 : note that we uses the dns1 for the LAN, and the 2 others for the internet conx
-#- $intf input: for each $device (for example ethx)
-#-  $intf->{$device}{IPADDR} : IP address
-#-  $intf->{$device}{NETMASK} : netmask
-#-  $intf->{$device}{DEVICE} : DEVICE = $device
-#-  $intf->{$device}{BOOTPROTO} : boot prototype : "bootp" or "dhcp" or "pump" or ...
-sub configureNetwork2 {
-    my ($in, $modules_conf, $_prefix, $netc, $intf) = @_;
-    my $etc = "$::prefix/etc";
-    if (!$::testing) {
-        require network::ethernet;
-        network::ethernet::update_iftab();
-        network::ethernet::configure_eth_aliases($modules_conf);
-
-        $netc->{wireless_eth} and $in->do_pkgs->ensure_binary_is_installed('wireless-tools', 'iwconfig', 'auto');
-        write_conf($netc);
-        write_resolv_conf("$etc/resolv.conf", $netc) unless $netc->{DHCP};
-        if ($::isInstall && ! -e "/etc/resolv.conf") {
-            #- symlink resolv.conf in install root too so that updates and suppl media can be added
-            symlink "$etc/resolv.conf", "/etc/resolv.conf";
-        }
-        foreach (grep { !/^ppp\d+/ } keys %$intf) {
-	    unlink("$etc/sysconfig/network-scripts/$_");
-	    write_interface_conf("$etc/sysconfig/network-scripts/ifcfg-$_", $intf->{$_}, $netc, $::prefix);
-	    $intf->{$_}{BOOTPROTO} eq "dhcp" and network::ethernet::install_dhcp_client($in, $intf->{$_});
-	}
-        add2hosts("$etc/hosts", $netc->{HOSTNAME}, "127.0.0.1") if $netc->{HOSTNAME};
-        add2hosts("$etc/hosts", "localhost", "127.0.0.1");
-
-        if ($netc->{ZEROCONF_HOSTNAME}) {
-            $in->do_pkgs->ensure_binary_is_installed('tmdns', 'tmdns', 'auto') if !$in->do_pkgs->is_installed('bind');
-            $in->do_pkgs->ensure_binary_is_installed('zcip', 'zcip', 'auto');
-            write_zeroconf("$etc/tmdns.conf", $netc->{ZEROCONF_HOSTNAME});
-	    require services;
-            services::start_service_on_boot("tmdns");
-            services::restart("tmdns");
-        } else {
-            #- disable zeroconf
-            require services;
-            #- write blank hostname so that drakconnect does not assume zeroconf is enabled
-            -f "$etc/tmdns.conf" and write_zeroconf("$etc/tmdns.conf", '');
-            if (-f "$etc/rc.d/init.d/tmdns") {
-                services::stop("tmdns");
-                services::do_not_start_service_on_boot("tmdns");
-            }
-        }
-        any { $_->{BOOTPROTO} =~ /^(pump|bootp)$/ } values %$intf and $in->do_pkgs->install('pump');
-    }
-}
-
-1;
diff --git a/perl-install/network/nfs.pm b/perl-install/network/nfs.pm
deleted file mode 100644
index 37dd954e5..000000000
--- a/perl-install/network/nfs.pm
+++ /dev/null
@@ -1,69 +0,0 @@
-package network::nfs; # $Id$
-
-use strict;
-use diagnostics;
-
-use common;
-use network::network;
-use network::smbnfs;
-use log;
-
-our @ISA = 'network::smbnfs';
-
-sub to_fstab_entry {
-    my ($class, $e) = @_;
-    $class->to_fstab_entry_raw($e, 'nfs');
-}
-sub comment_to_string {
-    my ($_class, $comment) = @_;
-    member($comment, qw(* 0.0.0.0/0.0.0.0 (everyone))) ? '' : $comment;
-}
-sub from_dev { 
-    my ($_class, $dev) = @_;
-    $dev =~ m|(.*?):(.*)|;
-}
-sub to_dev_raw {
-    my ($_class, $server, $name) = @_;
-    $server . ':' . $name;
-}
-
-sub check {
-    my ($_class, $in) = @_;
-    $in->do_pkgs->ensure_binary_is_installed('nfs-utils-clients', 'showmount') or return;
-    system('/etc/init.d/portmap start') if system('/etc/init.d/portmap status') != 0;
-    1;
-}
-
-sub find_servers {
-    open(my $F2, "rpcinfo-flushed -b mountd 2 |");
-    open(my $F3, "rpcinfo-flushed -b mountd 3 |");
-
-    common::nonblock($F2);
-    common::nonblock($F3);
-    my $domain = chomp_(`domainname`);
-    my ($s, %servers);
-    my $quit;
-    while (!$quit) {
-	$quit = 1;
-	sleep 1;
-	while ($s = <$F2> || <$F3>) {
-	    $quit = 0;
-	    my ($ip, $name) = $s =~ /(\S+)\s+(\S+)/ or log::explanations("bad line in rpcinfo output"), next;
-	    $name =~ s/\.$//;
-	    $name =~ s/\Q.$domain\E$//;
-	    $servers{$ip} ||= { ip => $ip, if_($name ne '(unknown)', name => $name) };
-	}
-    }
-    values %servers;
-}
-
-sub find_exports {
-    my ($_class, $server) = @_;
-
-    my @l;
-    run_program::raw({ timeout => 1 }, "showmount", '>', \@l, "--no-headers", "-e", $server->{ip} || $server->{name});
-
-    map { if_(/(\S+(\s*\S+)*)\s+(\S+)/, { name => $1, comment => $3, server => $server }) } @l;
-}
-
-1;
diff --git a/perl-install/network/shorewall.pm b/perl-install/network/shorewall.pm
deleted file mode 100644
index 82d3c5ec0..000000000
--- a/perl-install/network/shorewall.pm
+++ /dev/null
@@ -1,146 +0,0 @@
-package network::shorewall; # $Id$
-
-
-
-
-use detect_devices;
-use network::netconnect;
-use network::ethernet;
-use network::network;
-use run_program;
-use common;
-use log;
-
-
-sub check_iptables {
-    my ($in) = @_;
-
-    my $existing_config = -f "$::prefix/etc/sysconfig/iptables";
-    $existing_config ||= $::isStandalone && do {
-	system('modprobe iptable_nat');
-	-x '/sbin/iptables' && listlength(`/sbin/iptables -t nat -nL`) > 8;
-    };
-}
-
-sub set_config_file {
-    my ($file, @l) = @_;
-
-    my $done;
-    substInFile {
-	if (!$done && (/^#LAST LINE/ || eof)) {
-	    $_ = join('', map { join("\t", @$_) . "\n" } @l) . $_;
-	    $done = 1;
-	} else {
-	    $_ = '' if /^[^#]/;
-	}
-    } "$::prefix/etc/shorewall/$file";
-}
-
-sub get_config_file {
-    my ($file) = @_;
-    map { [ split ' ' ] } grep { !/^#/ } cat_("$::prefix/etc/shorewall/$file");
-}
-
-sub get_ifcfg_interface() {
-    my $netcnx = {};
-    my $netc = {};
-    my $intf = {};
-    network::netconnect::read_net_conf($netcnx, $netc, $intf);
-    network::tools::get_default_gateway_interface($netc, $intf);
-}
-
-sub get_shorewall_interface() {
-    my $default_dev = get_ifcfg_interface();
-    $default_dev =~ /^ippp/ && "ippp+" ||
-    $default_dev =~ /^ppp/ && "ppp+" ||
-    $default_dev;
-}
-
-sub ask_shorewall_interface {
-    my ($in, $interface) = @_;
-    my $modules_conf = modules::any_conf->read;
-    my @all_cards = network::ethernet::get_eth_cards($modules_conf);
-    my %net_devices = network::ethernet::get_eth_cards_names(@all_cards);
-    put_in_hash(\%net_devices, { 'ppp+' => 'ppp+', 'ippp+' => 'ippp+' });
-
-    $in->ask_from('',
-		  N("Please enter the name of the interface connected to the internet.
-
-Examples:
-		ppp+ for modem or DSL connections, 
-		eth0, or eth1 for cable connection, 
-		ippp+ for a isdn connection.
-"),
-		  [ { label => N("Net Device"), val => \$interface, list => [ sort keys %net_devices ], format => sub { $net_devices{$_[0]} || $_[0] }, not_edit => 0 } ]);
-    $interface;
-}
-
-sub read_default_interfaces {
-    my ($conf, $o_in) = @_;
-    my $interface = get_shorewall_interface();
-    $o_in and $interface = ask_shorewall_interface($o_in, $interface);
-    $conf->{net_interface} = $interface;
-    $conf->{loc_interface} = [  grep { $_ ne $interface } detect_devices::getNet() ];
-}
-
-sub read {
-    my ($o_in) = @_;
-    my %conf = (disabled => !glob_("$::prefix/etc/rc3.d/S*shorewall"),
-                ports => join(' ', map {
-                    my $e = $_;
-                    map { "$_/$e->[3]" } split(',', $e->[4]);
-                } grep { $_->[0] eq 'ACCEPT' && $_->[1] eq 'net' } get_config_file('rules'))
-               );
-
-    if (my ($e) = get_config_file('masq')) {
-	$conf{masquerade}{subnet} = $e->[1] if $e->[1];
-    }
-    read_default_interfaces(\%conf, $o_in);
-    $conf{net_interface} && \%conf;
-}
-
-sub write {
-    my ($conf) = @_;
-    my $default_intf = get_ifcfg_interface();
-    my $use_pptp = $default_intf =~ /^ppp/ && cat_("$::prefix/etc/ppp/peers/$default_intf") =~ /pptp/;
-    my $squid_port = network::network::read_squid_conf()->{http_port}[0];
-
-    my %ports_by_proto;
-    foreach (split ' ', $conf->{ports}) {
-	m!^(\d+(:\d+)?)/(udp|tcp|icmp)$! or die "bad port $_\n";
-	push @{$ports_by_proto{$3}}, $1;
-    }
-
-    set_config_file("zones", 
-		    [ 'net', 'Net', 'Internet zone' ],
-		    if_($conf->{loc_interface}[0], [ 'loc', 'Local', 'Local' ]),
-		   );
-    set_config_file('interfaces',
-		    [ 'net', $conf->{net_interface}, 'detect' ],
-		    (map { [ 'loc', $_, 'detect' ] } @{$conf->{loc_interface} || []}),
-		   );
-    set_config_file('policy',
-		    if_($conf->{loc_interface}[0], [ 'loc', 'net', 'ACCEPT' ], [ 'loc', 'fw', 'ACCEPT' ], [ 'fw', 'loc', 'ACCEPT' ]),
-		    [ 'fw', 'net', 'ACCEPT' ],
-		    [ 'net', 'all', 'DROP', 'info' ],
-		    [ 'all', 'all', 'REJECT', 'info' ],
-		   );
-    set_config_file('rules',
-    		    if_($use_pptp, [ 'ACCEPT', 'fw', 'loc:10.0.0.138', 'tcp', '1723' ]),
-		    if_($use_pptp, [ 'ACCEPT', 'fw', 'loc:10.0.0.138', 'gre' ]),
-		    (map { 
-			map_each { [ 'ACCEPT', $_, 'fw', $::a, join(',', @$::b), '-' ] } %ports_by_proto; 
-		    } ('net', if_($conf->{loc_interface}[0], 'loc'))),
-		   );
-		   if (cat_("/etc/shorewall/rules") !~ /^\s*REDIRECT\s*loc\s*$squid_port\s+(\S+)/mg && $squid_port && -f "/var/run/squid.pid" && grep { /Loc/i } cat_("/etc/shorewall/zones")) {
-	substInFile {
-		s/#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE/REDIRECT\tloc\t$squid_port\ttcp\twww\t-\nACCEPT\tfw\tnet\ttcp\twww\n#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE/;
-	} "/etc/shorewall/rules";
-}
-    set_config_file('masq', if_($conf->{masquerade}, [ $conf->{net_interface}, $conf->{masquerade}{subnet} ]));
-
-    services::set_status('shorewall', !$conf->{disabled}, $::isInstall);
-}
-
-1;
-
diff --git a/perl-install/network/smb.pm b/perl-install/network/smb.pm
deleted file mode 100644
index ef98f6945..000000000
--- a/perl-install/network/smb.pm
+++ /dev/null
@@ -1,217 +0,0 @@
-package network::smb; # $Id$
-
-use strict;
-use diagnostics;
-
-use common;
-use fs;
-use network::network;
-use network::smbnfs;
-
-
-our @ISA = 'network::smbnfs';
-
-sub to_fstab_entry {
-    my ($class, $e) = @_;
-    my $part = $class->to_fstab_entry_raw($e, 'smbfs');
-    if ($e->{server}{username}) {
-	my ($options, $unknown) = fs::mount_options::unpack($part);
-	$options->{"$_="} = $e->{server}{$_} foreach qw(username password domain);
-	fs::mount_options::pack($part, $options, $unknown);
-    }
-    $part;
-}
-sub from_dev { 
-    my ($_class, $dev) = @_;
-    $dev =~ m|//(.*?)/(.*)|;
-}
-sub to_dev_raw {
-    my ($_class, $server, $name) = @_;
-    '//' . $server . '/' . $name;
-}
-
-sub check {
-    my ($_class, $in) = @_;
-    $in->do_pkgs->ensure_binary_is_installed('samba-client', 'nmblookup');
-}
-
-sub smbclient {
-    my ($server) = @_;
-    my $name  = $server->{name} || $server->{ip};
-    my $ip    = $server->{ip} ? "-I $server->{ip}" : '';
-    my $group = $server->{group} ? qq( -W "$server->{group}") : '';
-
-    my $U = $server->{username} ? sprintf("%s/%s%%%s", @$server{'domain', 'username', 'password'}) : '%';
-    my %h;
-    foreach (`smbclient -g -U "$U" -L "$name" $ip$group 2>/dev/null`) {
-	if (my ($type, $v1, $v2) = /(.*)\|(.*)\|(.*)/) {
-	    push @{$h{$type}}, [ $v1, $v2 ];
-	} elsif (/^Error returning browse list/) {
-	    push @{$h{Error}}, $_;
-	}
-    }
-    \%h;
-}
-
-sub find_servers {
-    my (undef, @l) = `nmblookup "*"`;
-    s/\s.*\n// foreach @l;
-    my @servers = grep { network::network::is_ip($_) } @l;
-    my %servers;
-    $servers{$_}{ip} = $_ foreach @servers;
-    my ($ip, $browse);
-    foreach (`nmblookup -A @servers`) {
-	my $nb = /^Looking up status of (\S+)/ .. /^$/ or next;
-	if ($nb == 1) {
-	    $ip = $1;
-	} elsif (/<00>/) {
-	    $servers{$ip}{/<GROUP>/ ? 'group' : 'name'} ||= lc first(/(\S+)/);
-	} elsif (/__MSBROWSE__/) {
-	    $browse ||= $servers{$ip};
-	}
-    }
-    if ($browse) {
-	my %l;
-	my $workgroups = smbclient($browse)->{Workgroup} || [];
-	foreach (@$workgroups) {
-	    my ($group, $name) = map { lc($_) } @$_;
-
-	    # already done
-	    next if any { $group eq $_->{group} } values %servers;
-
-	    $l{$name} = $group;
-	}
-	if (my @l = keys %l) {
-	    foreach (`nmblookup @l`) {
-		$servers{$1} = { name => $2, group => $l{$2} } if /(\S+)\s+([^<]+)<00>/;
-	    }
-	}
-    }
-    values %servers;
-}
-
-sub find_exports {
-    my ($_class, $server) = @_;
-    my @l;
-
-    my $browse = smbclient($server);
-    if (my $err = find { /NT_STATUS_/ } @{$browse->{Error} || []}) {
-	die $err;
-    }
-    foreach (@{$browse->{Disk} || []}) {
-	my ($name, $comment) = @$_;
-	push @l, { name => $name, type => 'Disk', comment => $comment, server => $server }
-	  if $name !~ /\$$/ && $name !~ /netlogon|NETLOGON|SYSVOL/;
-    }
-    @l;
-}
-
-sub authentications_available {
-    my ($server) = @_;
-    map { if_(/^auth.\Q$server->{name}.\E(.*)/, $1) } all("/etc/samba");
-}
-
-sub to_credentials {
-    my ($server_name, $username) = @_;
-    $username or die 'to_credentials';
-    "/etc/samba/auth.$server_name.$username";
-}
-
-sub fstab_entry_to_credentials {
-    my ($part) = @_;    
-
-    my ($server_name) = network::smb->from_dev($part->{device}) or return;
-
-    my ($options, $unknown) = fs::mount_options::unpack($part);
-    $options->{'username='} && $options->{'password='} or return;
-    my %h = map { $_ => delete $options->{"$_="} } qw(username domain password);
-    $h{file} = $options->{'credentials='} = to_credentials($server_name, $h{username});
-    fs::mount_options::pack_($part, $options, $unknown), \%h;
-}
-
-sub remove_bad_credentials {
-    my ($server) = @_;
-    unlink to_credentials($server->{name}, $server->{username});
-}
-
-sub save_credentials {
-    my ($credentials) = @_;
-    my $file = $credentials->{file};
-    output_with_perm("$::prefix$file", 0640, map { "$_ = $credentials->{$_}\n" } qw(username domain password));
-}
-
-
-sub read_credentials_raw {
-    my ($file) = @_;
-    my %h = map { /(.*?)\s*=\s*(.*)/ } cat_("$::prefix$file");
-    \%h;
-}
-
-sub read_credentials {
-    my ($server, $username) = @_;
-    put_in_hash($server, read_credentials_raw(to_credentials($server->{name}, $username)));
-}
-
-
-sub write_smb_conf {
-    my ($domain) = @_;
-
-    #- was going to just have a canned config in samba-winbind
-    #- and replace the domain, but sylvestre/buchan did not bless it yet
-
-    my $f = "$::prefix/etc/samba/smb.conf";
-    rename $f, "$f.orig";
-    output($f, "
-[global]
-	workgroup = $domain  
-	server string = Samba Server %v
-	security = domain  
-	encrypt passwords = Yes
-	password server = *
-	log file = /var/log/samba/log.%m
-	max log size = 50
-	socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
-	unix charset = ISO8859-15
-	os level = 18
-	local master = No
-	dns proxy = No
-	idmap uid = 10000-20000
-	idmap gid = 10000-20000
-	winbind separator = +
-	template homedir = /home/%D/%U
-	template shell = /bin/bash
-	winbind use default domain = yes
-");
-}
-
-sub write_smb_ads_conf {
-    my ($domain, $realm) = @_;
-
-    #- was going to just have a canned config in samba-winbind
-    #- and replace the domain, but sylvestre/buchan did not bless it yet
-
-    my $f = "$::prefix/etc/samba/smb.conf";
-    rename $f, "$f.orig";
-    output($f, "
-[global]
-        workgroup = $domain
-        realm  = $realm
-        server string = Samba Member %v
-        security = ads
-        encrypt passwords = Yes
-        password server = *
-        log file = /var/log/samba/log.%m
-        max log size = 50
-        socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
-        os level = 18
-        local master = No
-        dns proxy = No
-        winbind uid = 10000-20000
-        winbind gid = 10000-20000
-        winbind separator = +
-        template homedir = /home/%D/%U
-        template shell = /bin/bash
-        winbind use default domain = yes
-");
-}
-1;
diff --git a/perl-install/network/smbnfs.pm b/perl-install/network/smbnfs.pm
deleted file mode 100644
index c38903028..000000000
--- a/perl-install/network/smbnfs.pm
+++ /dev/null
@@ -1,45 +0,0 @@
-package network::smbnfs; # $Id$
-
-use strict;
-use diagnostics;
-
-use fs;
-
-
-sub new { 
-    my ($class, $o_v) = @_;
-    bless($o_v || {}, $class);
-}
-
-sub server_to_string {
-    my ($_class, $server) = @_;
-    $server->{name} || $server->{ip};
-}
-sub comment_to_string {
-    my ($_class, $comment) = @_;
-    $comment;
-}
-sub to_dev {
-    my ($class, $e) = @_;
-    $class->to_dev_raw($class->server_to_string($e->{server}), $e->{name} || $e->{ip});
-}
-sub to_string {
-    my ($class, $e) = @_;
-    my $comment = $class->comment_to_string($e->{comment});
-    ($e->{name} || $e->{ip}) . ($comment ? " ($comment)" : '');
-}
-
-sub to_fullstring {
-    my ($class, $e) = @_;
-    my $comment = $class->comment_to_string($e->{comment});
-    $class->to_dev($e) . ($comment ? " ($comment)" : '');
-}
-sub to_fstab_entry_raw {
-    my ($class, $e, $fs_type) = @_;
-    my $fs_entry = { device => $class->to_dev($e), fs_type => $fs_type };
-    fs::mount_options::set_default($fs_entry);
-    $fs_entry;
-}
-
-1;
-
diff --git a/perl-install/network/squid.pm b/perl-install/network/squid.pm
deleted file mode 100644
index 7ca60d2b6..000000000
--- a/perl-install/network/squid.pm
+++ /dev/null
@@ -1,73 +0,0 @@
-package network::squid;
-
-use strict;
-use common;
-
-our $squid_conf_file = "$::prefix/etc/squid/squid.conf";
-
-sub read_squid_conf {
-    my ($o_file) = @_;
-    my $s = cat_($o_file || $squid_conf_file);
-    { http_port => [ $s =~ /^\s*http_port\s+(.*)/mg ],
-      cache_size => [ if_($s =~ /^\s*cache_dir diskd\s+(.*)/mg, split(' ', $1)) ],
-      admin_mail => [ if_($s =~ /^\s*err_html_text\s+(.*)/mg, split(' ', $1)) ] };
-}
-
-sub write_squid_conf {
-    my ($squid_conf, $intf, $internal_domain_name) = @_;
-
-    renamef($squid_conf_file, "$squid_conf_file.old");
-    output($squid_conf_file, qq(
-http_port $squid_conf->{http_port}[0]
-hierarchy_stoplist cgi-bin ?
-acl QUERY urlpath_regex cgi-bin \\?
-no_cache deny QUERY
-cache_dir diskd /var/spool/squid $squid_conf->{cache_size}[1] 16 256
-cache_store_log none
-auth_param basic children 5
-auth_param basic realm Squid proxy-caching web server
-auth_param basic credentialsttl 2 hours
-refresh_pattern ^ftp:           1440    20%     10080
-refresh_pattern ^gopher:        1440    0%      1440
-refresh_pattern .               0       20%     4320
-half_closed_clients off
-acl all src 0.0.0.0/0.0.0.0
-acl manager proto cache_object
-acl localhost src 127.0.0.1/255.255.255.255
-acl to_localhost dst 127.0.0.0/8
-acl SSL_ports port 443 563
-acl Safe_ports port 80          # http
-acl Safe_ports port 21          # ftp
-acl Safe_ports port 443 563     # https, snews
-acl Safe_ports port 70          # gopher
-acl Safe_ports port 210         # wais
-acl Safe_ports port 1025-65535  # unregistered ports
-acl Safe_ports port 280         # http-mgmt
-acl Safe_ports port 488         # gss-http
-acl Safe_ports port 591         # filemaker
-acl Safe_ports port 777         # multiling http
-acl CONNECT method CONNECT
-http_access allow manager localhost
-http_access deny manager
-http_access deny !Safe_ports
-http_access deny CONNECT !SSL_ports
-http_access deny to_localhost
-acl mynetwork src $intf->{NETWORK}/$intf->{NETMASK}
-http_access allow mynetwork
-http_access allow localhost
-http_reply_access allow all
-icp_access allow all
-visible_hostname $squid_conf->{visible_hostname}[0]
-httpd_accel_host virtual
-httpd_accel_with_proxy on
-httpd_accel_uses_host_header on
-append_domain .$internal_domain_name
-err_html_text $squid_conf->{admin_mail}[0]
-deny_info ERR_CUSTOM_ACCESS_DENIED all
-memory_pools off
-coredump_dir /var/spool/squid
-ie_refresh on
-)) if !$::testing;
-}
-
-1;
diff --git a/perl-install/network/test.pm b/perl-install/network/test.pm
deleted file mode 100644
index 2ba8538c6..000000000
--- a/perl-install/network/test.pm
+++ /dev/null
@@ -1,158 +0,0 @@
-package network::test;          # $Id$
-
-use strict;
-use MDK::Common;
-use run_program;
-use Socket;
-
-sub new {
-    my ($class, $o_hostname) = @_;
-    bless {
-           hostname => $o_hostname || "www.mandriva.com"
-          }, $class;
-}
-
-#- launch synchronous test, will hang until the test finishes
-sub test_synchronous {
-    my ($o) = @_;
-    ($o->{address}, $o->{ping}) = resolve_and_ping($o->{hostname});
-    $o->{done} = 1;
-}
-
-#- launch asynchronous test, will not hang
-sub start {
-    my ($o) = @_;
-    $o->{done} = 0;
-    $o->{kid} = bg_command->new(sub {
-                                    my ($address, $ping) = resolve_and_ping($o->{hostname});
-                                    print "$address|$ping\n";
-                                });
-}
-
-#- abort asynchronous test
-sub abort {
-    my ($o) = @_;
-    if ($o->{kid}) {
-        kill -9, $o->{kid}{pid};
-        undef $o->{kid};
-    }
-}
-
-#- returns a true value if the test is finished, usefull for asynchronous tests
-sub is_done {
-    my ($o) = @_;
-    $o->update_status;
-    to_bool($o->{done});
-}
-
-#- return a true value if the connection works (hostname resolution and ping)
-sub is_connected {
-    my ($o) = @_;
-    to_bool(defined($o->{hostname}) && defined($o->{ping}));
-}
-
-#- get hostname used in test for resolution and ping
-sub get_hostname {
-    my ($o) = @_;
-    $o->{hostname};
-}
-
-#- get resolved address (if any) of given hostname
-sub get_address {
-    my ($o) = @_;
-    $o->{address};
-}
-
-#- get ping (if any) to given hostname
-sub get_ping {
-    my ($o) = @_;
-    $o->{ping};
-}
-
-sub resolve_and_ping {
-    my ($hostname) = @_;
-    require Net::Ping;
-    require Time::HiRes;
-    my $p;
-    if ($>) {
-        $p = Net::Ping->new('tcp');
-        # Try connecting to the www port instead of the echo port
-        $p->{port_num} = getservbyname('http', 'tcp');
-    } else {
-        $p = Net::Ping->new('icmp');
-    }
-    $p->hires; #- get ping as float
-    #- default timeout is 5 seconds
-    my ($ret, $ping, $address) = $p->ping($hostname, 5);
-    if ($ret) {
-        return $address, $ping;
-    } elsif (defined($ret)) {
-        return $address;
-    }
-}
-
-sub update_status {
-    my ($o) = @_;
-    if ($o->{kid}) {
-        my $fd = $o->{kid}{fd};
-        fcntl($fd, c::F_SETFL(), c::O_NONBLOCK()) or die "can not fcntl F_SETFL: $!";
-        local $| = 1;
-        if (defined(my $output = <$fd>)) {
-            ($o->{address}, $o->{ping}) = $output =~ /^([\d\.]+)\|([\d\.,]+)*$/;
-            $o->{done} = 1;
-            undef $o->{kid};
-        }
-    }
-}
-
-1;
-
-=head1 network::test
-
-=head2 Test synchronously
-
-#- resolve and get ping to hostname from command line if given, else to www.mandriva.com
-use lib qw(/usr/lib/libDrakX);
-use network::test;
-
-my $net_test = network::test->new($ARGV[0]);
-$net_test->test_synchronous;
-
-my $is_connected = $net_test->is_connected;
-my $hostname = $net_test->get_hostname;
-my $address = $net_test->get_address;
-my $ping = $net_test->get_ping;
-
-print "connected: $is_connected
-host: $hostname
-resolved host: $address
-ping to host: $ping
-";
-
-=head2 Test asynchronously
-
-#- resolve and get ping to hostname from command line if given, else to Mandriva
-#- prints a "." every 10 miliseconds during connection test
-use lib qw(/usr/lib/libDrakX);
-use network::test;
-
-my $net_test = network::test->new($ARGV[0]);
-$net_test->start;
-
-do {
-  print ".\n";
-  select(undef, undef, undef, 0.01);
-} while !$net_test->is_done;
-
-my $is_connected = $net_test->is_connected;
-my $hostname = $net_test->get_hostname;
-my $address = $net_test->get_address;
-my $ping = $net_test->get_ping;
-
-print "connected: $is_connected
-host: $hostname
-resolved host: $address
-ping to host: $ping
-";
-
-=cut
diff --git a/perl-install/network/tools.pm b/perl-install/network/tools.pm
deleted file mode 100644
index 6ba1d9886..000000000
--- a/perl-install/network/tools.pm
+++ /dev/null
@@ -1,273 +0,0 @@
-package network::tools; # $Id$
-
-use strict;
-use common;
-use run_program;
-use fsedit;
-use c;
-use vars qw(@ISA @EXPORT @EXPORT_OK);
-use MDK::Common::System qw(getVarsFromSh);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(connect_backend connected connected_bg disconnect_backend is_dynamic_ip passwd_by_login read_secret_backend test_connected remove_initscript write_secret_backend start_interface stop_interface);
-
-sub write_secret_backend {
-    my ($a, $b) = @_;
-    foreach my $i ("$::prefix/etc/ppp/pap-secrets", "$::prefix/etc/ppp/chap-secrets") {
-	substInFile { s/^'$a'.*\n//; $_ .= "\n'$a' * '$b' * \n" if eof  } $i;
-	#- restore access right to secrets file, just in case.
-	chmod 0600, $i;
-    }
-}
-
-sub unquotify {
-    my ($word) = @_;
-    $$word =~ s/^(['"]?)(.*)\1$/$2/;
-}
-
-sub read_secret_backend() {
-    my $conf = [];
-    foreach my $i ("pap-secrets", "chap-secrets") {
-	foreach (cat_("$::prefix/etc/ppp/$i")) {
-	    my ($login, $server, $passwd) = split(' ');
-	    if ($login && $passwd) {
-		unquotify \$passwd;
-		unquotify \$login;
-		unquotify \$server;
-		push @$conf, {login => $login,
-			      passwd => $passwd,
-			      server => $server };
-	    }
-	}
-    }
-    $conf;
-}
-
-sub passwd_by_login {
-    my ($login) = @_;
-    
-    unquotify \$login;
-    my $secret = read_secret_backend();
-    foreach (@$secret) {
-	return $_->{passwd} if $_->{login} eq $login;
-    }
-}
-
-sub connect_backend {
-    my ($netc) = @_;
-    run_program::raw({ detach => 1, root => $::prefix }, "/sbin/ifup", $netc->{NET_INTERFACE});
-}
-
-sub disconnect_backend {
-    my ($netc) = @_;
-    run_program::raw({ detach => 1, root => $::prefix }, "/sbin/ifdown", $netc->{NET_INTERFACE});
-}
-
-sub bg_command_as_root {
-    my ($name, @args) = @_;
-    #- FIXME: duplicate code from common::require_root_capability
-    if (check_for_xserver() && fuzzy_pidofs(qr/\bkwin\b/) > 0) {
-        run_program::raw({ detach => 1 }, "kdesu", "--ignorebutton", "-c", "$name @args");
-    } else {
-	run_program::raw({ detach => 1 }, [ 'consolehelper', $name ], @args);
-    }
-}
-
-sub user_run_interface_command {
-    my ($command, $intf) = @_;
-    if (system("/usr/sbin/usernetctl $intf report") == 0) {
-        run_program::raw({ detach => 1 }, $command, $intf);
-    } else {
-        bg_command_as_root($command, $intf);
-    }
-}
-
-sub start_interface {
-    my ($intf) = @_;
-    user_run_interface_command('/sbin/ifup', $intf);
-}
-
-sub stop_interface {
-    my ($intf) = @_;
-    user_run_interface_command('/sbin/ifdown', $intf);
-}
-
-sub connected() { gethostbyname("mandrakesoft.com") ? 1 : 0 }
-
-# request a ref on a bg_connect and a ref on a scalar
-sub connected_bg__raw {
-    my ($kid_pipe, $status) = @_;
-    local $| = 1;
-    if (ref($kid_pipe) && ref($$kid_pipe)) {
-	my $fd = $$kid_pipe->{fd};
-	fcntl($fd, c::F_SETFL(), c::O_NONBLOCK()) or die "can not fcntl F_SETFL: $!";
-	my $a  = <$fd>;
-     $$status = $a if defined $a;
-    } else { $$kid_pipe = check_link_beat() }
-}
-
-my $kid_pipe;
-sub connected_bg {
-    my ($status) = @_;
-    connected_bg__raw(\$kid_pipe, $status);
-}
-
-# test if connected;
-# cmd = 0 : ask current status
-#     return : 0 : not connected; 1 : connected; -1 : no test ever done; -2 : test in progress
-# cmd = 1 : start new connection test
-#     return : -2
-# cmd = 2 : cancel current test
-#    return : nothing
-# cmd = 3 : return current status even if a test is in progress
-my $kid_pipe_connect;
-my $current_connection_status;
-
-sub test_connected {
-    local $| = 1;
-    my ($cmd) = @_;
-    
-    $current_connection_status = -1 if !defined $current_connection_status;
-    
-    if ($cmd == 0) {
-        connected_bg__raw(\$kid_pipe_connect, \$current_connection_status);
-    } elsif ($cmd == 1) {
-        if ($current_connection_status != -2) {
-             $current_connection_status = -2;
-             $kid_pipe_connect = check_link_beat();
-        }
-    } elsif ($cmd == 2) {
-        if (defined($kid_pipe_connect)) {
-	    kill -9, $kid_pipe_connect->{pid};
-	    undef $kid_pipe_connect;
-        }
-    }
-    return $current_connection_status;
-}
-
-sub check_link_beat() {
-    bg_command->new(sub {
-                        require Net::Ping;
-                        my $p;
-                        if ($>) {
-                            $p = Net::Ping->new("tcp");
-                            # Try connecting to the www port instead of the echo port
-                            $p->{port_num} = getservbyname("http", "tcp");
-                        } else {
-                            $p = Net::Ping->new("icmp");
-                        }
-                        print $p->ping("www.mandriva.com") ? 1 : 0;
-                    });
-}
-
-sub remove_initscript() {
-    $::testing and return;
-    if (-e "$::prefix/etc/rc.d/init.d/internet") {
-        run_program::rooted($::prefix, "/sbin/chkconfig", "--del", "internet");
-        rm_rf("$::prefix/etc/rc.d/init.d/internet");
-        log::explanations("Removed internet service");
-    }
-}
-
-sub use_windows {
-    my ($file) = @_;
-    my $all_hds = fsedit::get_hds(); 
-    fs::get_info_from_fstab($all_hds);
-    if (my $part = find { $_->{device_windobe} eq 'C' } fs::get::fstab($all_hds)) {
-	my $source = find { -d $_ && -r "$_/$file" } map { "$part->{mntpoint}/$_" } qw(windows/system winnt/system windows/system32/drivers winnt/system32/drivers);
-	log::explanations("Seek in $source to find firmware");
-	$source;
-    } else {
-	my $failed = N("No partition available");
-	log::explanations($failed);
-	undef, $failed;
-    }
-}
-
-sub use_floppy {
-    my ($in, $file) = @_;
-    my $floppy = detect_devices::floppy();
-    $in->ask_okcancel(N("Insert floppy"),
-		      N("Insert a FAT formatted floppy in drive %s with %s in root directory and press %s", $floppy, $file, N("Next"))) or return;
-    if (eval { fs::mount(devices::make($floppy), '/mnt', 'vfat', 'readonly'); 1 }) {
-	log::explanations("Mounting floppy device $floppy in /mnt");
-	'/mnt';
-    } else {
-	my $failed = N("Floppy access error, unable to mount device %s", $floppy);
-	log::explanations($failed);
-	undef, $failed;
-    }
-}
-
-
-sub is_dynamic_ip {
-  my ($intf) = @_;
-  any { $_->{BOOTPROTO} !~ /^(none|static|)$/ } values %$intf;
-}
-
-sub is_dynamic_host {
-  my ($intf) = @_;
-  any { defined $_->{DHCP_HOSTNAME} } values %$intf;
-}
-
-#- returns interface whose IP address matchs given IP address, according to its network mask
-sub find_matching_interface {
-    my ($intf, $address) = @_;
-    my @ip = split '\.', $address;
-    find {
-        my @intf_ip = split '\.', $intf->{$_}{IPADDR} or return;
-        my @mask = split '\.', $intf->{$_}{NETMASK} or return;
-        every { $_ } mapn { ($_[0] & $_[2]) == ($_[1] & $_[2]) } \@intf_ip, \@ip, \@mask;
-    } sort keys %$intf;
-}
-
-#- returns gateway interface if found
-sub get_default_gateway_interface {
-    my ($netc, $intf) = @_;
-    my @intfs = sort keys %$intf;
-    `$::prefix/sbin/ip route show` =~ /^default.*\s+dev\s+(\S+)/m && $1 ||
-    $netc->{GATEWAYDEV} ||
-    $netc->{GATEWAY} && find_matching_interface($intf, $netc->{GATEWAY}) ||
-    (find { get_interface_type($intf->{$_}) eq 'adsl' } @intfs) ||
-    (find { get_interface_type($intf->{$_}) eq 'isdn' && text2bool($intf->{$_}{DIAL_ON_IFUP}) } @intfs) ||
-    (find { get_interface_type($intf->{$_}) eq 'modem' } @intfs) ||
-    (find { get_interface_type($intf->{$_}) eq 'wifi' && $intf->{$_}{BOOTPROTO} eq 'dhcp' } @intfs) ||
-    (find { get_interface_type($intf->{$_}) eq 'ethernet' && $intf->{$_}{BOOTPROTO} eq 'dhcp' } @intfs);
-}
-
-sub get_interface_status {
-    my ($gw_intf) = @_;
-    my @routes = `$::prefix/sbin/ip route show`;
-    my $is_up = any { /\s+dev\s+$gw_intf(?:\s+|$)/ } @routes;
-    my ($gw_address) = join('', @routes) =~ /^default\s+via\s+(\S+).*\s+dev\s+$gw_intf(?:\s+|$)/m;
-    return $is_up, $gw_address;
-}
-
-#- returns (gateway_interface, interface is up, gateway address, dns server address)
-sub get_internet_connection {
-    my ($netc, $intf, $o_gw_intf) = @_;
-    my $gw_intf = $o_gw_intf || get_default_gateway_interface($netc, $intf) or return;
-    return $gw_intf, get_interface_status($gw_intf), $netc->{dnsServer};
-}
-
-sub get_interface_type {
-    my ($interface) = @_;
-    require detect_devices;
-    member($interface->{TYPE}, "xDSL", "ADSL") && "adsl" ||
-    $interface->{DEVICE} =~ /^ippp/ && "isdn" ||
-    $interface->{DEVICE} =~ /^ppp/ && "modem" ||
-    (detect_devices::is_wireless_interface($interface->{DEVICE}) || exists $interface->{WIRELESS_MODE}) && "wifi" ||
-    detect_devices::is_lan_interface($interface->{DEVICE}) && "ethernet" ||
-    "unknown";
-}
-
-sub get_default_metric {
-    my ($type) = @_;
-    my @known_types = ("ethernet_gigabit", "ethernet", "adsl", "wifi", "isdn", "modem", "unknown");
-    my $idx;
-    eval { $idx = find_index { $type eq $_ } @known_types };
-    $idx = @known_types if $@;
-    $idx * 10;
-}
-
-1;
diff --git a/perl-install/network/wireless.pm b/perl-install/network/wireless.pm
deleted file mode 100644
index d6cf9a6d6..000000000
--- a/perl-install/network/wireless.pm
+++ /dev/null
@@ -1,174 +0,0 @@
-package network::wireless;
-
-use strict;
-use common;
-
-sub convert_wep_key_for_iwconfig {
-    #- 5 or 13 characters, consider the key as ASCII and prepend "s:"
-    #- else consider the key as hexadecimal, do not strip dashes
-    #- always quote the key as string
-    my ($real_key, $restricted) = @_;
-    my $key = member(length($real_key), (5, 13)) ? "s:$real_key" : $real_key;
-    $restricted ? "restricted $key" : "open $key";
-}
-
-sub get_wep_key_from_iwconfig {
-    #- strip "s:" if the key is 5 or 13 characters (ASCII)
-    #- else the key as hexadecimal, do not modify
-    my ($key) = @_;
-    $key =~ s/^s:// if member(length($key), (7,15));
-    my ($mode, $real_key) = $key =~ /^(?:(open|restricted)\s+)?(.*)$/;
-    ($real_key, $mode eq 'restricted');
-}
-
-sub convert_key_for_wpa_supplicant {
-    my ($key) = @_;
-    if ($key =~ /^([[:xdigit:]]{4}[\:-])+[[:xdigit:]]{2,}$/) {
-        $key =~ s/[\:-]//g;
-        return lc($key);
-    } else {
-        return qq("$key");
-    }
-}
-
-sub wlan_ng_needed {
-    my ($module) = @_;
-    $module =~ /^prism2_/;
-}
-
-#- FIXME: to be improved (quotes, comments) and moved in common files
-sub wlan_ng_update_vars {
-    my ($file, $vars) = @_;
-    substInFile {
-        while (my ($key, $value) = each(%$vars)) {
-            s/^#?\Q$key\E=(?:"[^#]*"|[^#\s]*)(\s*#.*)?/$key=$value$1/ and delete $vars->{$key};
-        }
-        $_ .= join('', map { "$_=$vars->{$_}\n" } keys %$vars) if eof;
-    } $file;
-}
-
-sub wlan_ng_configure {
-    my ($essid, $key, $device, $module) = @_;
-    my $wlan_conf_file = "$::prefix/etc/wlan/wlan.conf";
-    my @wlan_devices = split(/ /, (cat_($wlan_conf_file) =~ /^WLAN_DEVICES="(.*)"/m)[0]);
-    push @wlan_devices, $device unless member($device, @wlan_devices);
-    #- enable device and make it use the choosen ESSID
-    wlan_ng_update_vars($wlan_conf_file,
-                        {
-                            WLAN_DEVICES => qq("@wlan_devices"),
-                            "SSID_$device" => qq("$essid"),
-                            "ENABLE_$device" => "y"
-                        });
-
-    my $wlan_ssid_file = "$::prefix/etc/wlan/wlancfg-$essid";
-    #- copy default settings for this ESSID if config file does not exist
-    -f $wlan_ssid_file or cp_f("$::prefix/etc/wlan/wlancfg-DEFAULT", $wlan_ssid_file);
-
-    #- enable/disable encryption
-    wlan_ng_update_vars($wlan_ssid_file,
-                        {
-                            (map { $_ => $key ? "true" : "false" } qw(lnxreq_hostWEPEncrypt lnxreq_hostWEPDecrypt dot11PrivacyInvoked dot11ExcludeUnencrypted)),
-                            AuthType => $key ? qq("sharedkey") : qq("opensystem"),
-                            if_($key,
-                                dot11WEPDefaultKeyID => 0,
-                                dot11WEPDefaultKey0 => qq("$key")
-                            )
-                        });
-    #- hide settings for non-root users
-    chmod 0600, $wlan_conf_file;
-    chmod 0600, $wlan_ssid_file;
-
-    #- apply settings on wlan interface
-    require services;
-    services::restart($module eq 'prism2_cs' ? 'pcmcia' : 'wlan');
-}
-
-sub wpa_supplicant_get_driver {
-    my ($module) = @_;
-    $module =~ /^hostap_/ ? "hostap" :
-    $module eq "prism54" ? "prism54" :
-    $module =~ /^ath_/ ? "madwifi" :
-    $module =~ /^at76c50|atmel_/ ? "atmel" :
-    $module eq "ndiswrapper" ? "ndiswrapper" :
-    $module =~ /^ipw2[12]00$/ ? "ipw" :
-    "wext";
-}
-
-sub wpa_supplicant_configure {
-    my ($essid, $key) = @_;
-    wpa_supplicant_add_network({
-            ssid => qq("$essid"),
-            psk => convert_key_for_wpa_supplicant($key),
-            scan_ssid => 1,
-    });
-}
-
-sub wpa_supplicant_add_network {
-    my ($new_network) = @_;
-    my $wpa_supplicant_conf = "$::prefix/etc/wpa_supplicant.conf";
-    my $s;
-    my %network;
-    foreach (cat_($wpa_supplicant_conf)) {
-        if (%network) {
-            #- in a "network = {}" block
-            if (/^\s*(\w+)=(.*?)(\s*#.*)?$/) {
-                push @{$network{entries}}, { key => $1, value => $2, comment => $3 };
-                $1 eq 'ssid' and $network{ssid} = $2;
-            } elsif (/^\}/) {
-                #- end of network block, write it
-                $s .= "network={$network{comment}\n";
-                my $update = $network{ssid} eq $new_network->{ssid};
-                foreach (@{$network{entries}}) {
-                    my $key = $_->{key};
-                    if ($update) {
-                        #- do not write entry if not provided in the new network
-                        exists $new_network->{$key} or next;
-                        #- update value from the new network
-                        $_->{value} = delete $new_network->{$key};
-                    }
-                    if ($key) {
-                        $s .= "    $key=$_->{value}$_->{comment}\n";
-                    } else {
-                        $s .= " $_->{comment}\n";
-                    }
-                }
-                if ($update) {
-                    while (my ($key, $value) = each(%$new_network)) {
-                        $s .= "    $key=$value\n";
-                    }
-                }
-                $s .= "}\n";
-                undef %network;
-                $update and undef $new_network;
-            } else {
-                #- unrecognized, keep it anyway
-                push @{$network{entries}}, { comment => $_ };
-            }
-        } else {
-            if (/^\s*network={(.*)/) {
-                #- beginning of a new network block
-                $network{comment} = $1;
-            } else {
-                #- keep other options, comments
-                $s .= $_;
-            }
-        }
-    }
-    if ($new_network) {
-        #- network wasn't found, write it
-        $s .= "\nnetwork={\n";
-        #- write ssid first
-        if (my $ssid = delete $new_network->{ssid}) {
-            $s .= "    ssid=$ssid\n";
-        }
-        while (my ($key, $value) = each(%$new_network)) {
-            $s .= "    $key=$value\n";
-        }
-        $s .= "}\n";
-    }
-    output($wpa_supplicant_conf, $s);
-    #- hide keys for non-root users
-    chmod 0600, $wpa_supplicant_conf;
-}
-
-1;
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
deleted file mode 100644
index f6fe086c0..000000000
--- a/perl-install/partition_table.pm
+++ /dev/null
@@ -1,636 +0,0 @@
-package partition_table; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use fs::type;
-use partition_table::raw;
-use detect_devices;
-use log;
-
-our @fields2save = qw(primary extended totalsectors isDirty will_tell_kernel);
-
-
-sub hd2minimal_part {
-    my ($hd) = @_;
-    { 
-	rootDevice => $hd->{device}, 
-	if_($hd->{usb_media_type}, is_removable => 1),
-    };
-}
-
-#- works for both hard drives and partitions ;p
-sub description {
-    my ($hd) = @_;
-    my $win = $hd->{device_windobe};
-
-    sprintf "%s%s (%s)", 
-      $hd->{device}, 
-      $win && " [$win:]", 
-	join(', ', 
-	     grep { $_ } 
-	       formatXiB($hd->{totalsectors} || $hd->{size}, 512),
-	       $hd->{info}, $hd->{mntpoint}, $hd->{fs_type});
-}
-
-sub isPrimary {
-    my ($part, $hd) = @_;
-    foreach (@{$hd->{primary}{raw}}) { $part eq $_ and return 1 }
-    0;
-}
-
-sub adjustStartAndEnd {
-    my ($hd, $part) = @_;
-
-    $hd->adjustStart($part);
-    $hd->adjustEnd($part);
-}
-
-sub verifyNotOverlap {
-    my ($a, $b) = @_;
-    $a->{start} + $a->{size} <= $b->{start} || $b->{start} + $b->{size} <= $a->{start};
-}
-sub verifyInside {
-    my ($a, $b) = @_;
-    $b->{start} <= $a->{start} && $a->{start} + $a->{size} <= $b->{start} + $b->{size};
-}
-
-sub verifyParts_ {
-    foreach my $i (@_) {
-	foreach (@_) {
-	    next if !$i || !$_ || $i == $_ || isWholedisk($i) || isExtended($i); #- avoid testing twice for simplicity :-)
-	    if (isWholedisk($_)) {
-		verifyInside($i, $_) or
-		  cdie sprintf("partition sector #$i->{start} (%s) is not inside whole disk (%s)!",
-			       formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
-	    } elsif (isExtended($_)) {
-		verifyNotOverlap($i, $_) or
-		  log::l(sprintf("warning partition sector #$i->{start} (%s) is overlapping with extended partition!",
-				 formatXiB($i->{size}, 512))); #- only warning for this one is acceptable
-	    } else {
-		verifyNotOverlap($i, $_) or
-		  cdie sprintf("partitions sector #$i->{start} (%s) and sector #$_->{start} (%s) are overlapping!",
-			       formatXiB($i->{size}, 512), formatXiB($_->{size}, 512));
-	    }
-	}
-    }
-}
-sub verifyParts {
-    my ($hd) = @_;
-    verifyParts_(get_normal_parts($hd));
-}
-sub verifyPrimary {
-    my ($pt) = @_;
-    $_->{start} > 0 || arch() =~ /^sparc/ || die "partition must NOT start at sector 0" foreach @{$pt->{normal}};
-    verifyParts_(@{$pt->{normal}}, $pt->{extended});
-}
-
-sub compute_device_name {
-    my ($part, $hd) = @_;
-    $part->{device} = $hd->{prefix} . $part->{part_number};
-    $part->{devfs_device} = $hd->{devfs_prefix} . '/part' . $part->{part_number};
-}
-
-sub assign_device_numbers {
-    my ($hd) = @_;
-
-    my $i = 1;
-    my $start = 1; 
-    
-    #- on PPC we need to assign device numbers to the holes too - big FUN!
-    #- not if it's an IBM machine using a DOS partition table though
-    if (arch() =~ /ppc/ && detect_devices::get_mac_model() !~ /^IBM/) {
-	#- first sort the normal parts
-	$hd->{primary}{normal} = [ sort { $a->{start} <=> $b->{start} } @{$hd->{primary}{normal}} ];
-    
-	#- now loop through them, assigning partition numbers - reserve one for the holes
-	foreach (@{$hd->{primary}{normal}}) {
-	    if ($_->{start} > $start) {
-		log::l("PPC: found a hole on $hd->{prefix} before $_->{start}, skipping device..."); 
-		$i++;
-	    }
-	    $_->{part_number} = $i;
-	    compute_device_name($_, $hd);
-	    $start = $_->{start} + $_->{size};
-	    $i++;
-	}
-    } else {
-	foreach (@{$hd->{primary}{raw}}) {
-	    $_->{part_number} = $i;
-	    compute_device_name($_, $hd);
-	    $i++;
-	}
-	foreach (map { $_->{normal} } @{$hd->{extended} || []}) {
-	    my $dev = $hd->{prefix} . $i;
-	    my $renumbered = $_->{device} && $dev ne $_->{device};
-	    if ($renumbered) {
-		require fs;
-		eval { fs::umount_part($_) }; #- at least try to umount it
-		will_tell_kernel($hd, del => $_, 'delay_del');
-		push @{$hd->{partitionsRenumbered}}, [ $_->{device}, $dev ];
-	    }
-	    $_->{part_number} = $i;
-	    compute_device_name($_, $hd);
-	    if ($renumbered) {
-		will_tell_kernel($hd, add => $_, 'delay_add');
-	    }
-	    $i++;
-	}
-    }
-
-    #- try to figure what the windobe drive letter could be!
-    #
-    #- first verify there's at least one primary dos partition, otherwise it
-    #- means it is a secondary disk and all will be false :(
-    #-
-    my ($c, @others) = grep { isFat_or_NTFS($_) } @{$hd->{primary}{normal}};
-
-    $i = ord 'C';
-    $c->{device_windobe} = chr($i++) if $c;
-    $_->{device_windobe} = chr($i++) foreach grep { isFat_or_NTFS($_) } map { $_->{normal} } @{$hd->{extended}};
-    $_->{device_windobe} = chr($i++) foreach @others;
-}
-
-sub remove_empty_extended {
-    my ($hd) = @_;
-    my $last = $hd->{primary}{extended} or return;
-    @{$hd->{extended}} = grep {
-	if ($_->{normal}) {
-	    $last = $_;
-	} else {
-	    %{$last->{extended}} = $_->{extended} ? %{$_->{extended}} : ();
-	}
-	$_->{normal};
-    } @{$hd->{extended}};
-    adjust_main_extended($hd);
-}
-
-sub adjust_main_extended {
-    my ($hd) = @_;
-
-    if (!is_empty_array_ref $hd->{extended}) {
-	my ($l, @l) = @{$hd->{extended}};
-
-	# the first is a special case, must recompute its real size
-	my $start = round_down($l->{normal}{start} - 1, $hd->{geom}{sectors});
-	my $end = $l->{normal}{start} + $l->{normal}{size};
-	my $only_linux = 1; my $has_win_lba = 0;
-	foreach (map { $_->{normal} } $l, @l) {
-	    $start = min($start, $_->{start});
-	    $end = max($end, $_->{start} + $_->{size});
-	    $only_linux &&= isTrueLocalFS($_) || isSwap($_);
-	    $has_win_lba ||= $_->{pt_type} == 0xc || $_->{pt_type} == 0xe;
-	}
-	$l->{start} = $hd->{primary}{extended}{start} = $start;
-	$l->{size} = $hd->{primary}{extended}{size} = $end - $start;
-    }
-    if (!@{$hd->{extended} || []} && $hd->{primary}{extended}) {
-	will_tell_kernel($hd, del => $hd->{primary}{extended});
-	%{$hd->{primary}{extended}} = (); #- modify the raw entry
-	delete $hd->{primary}{extended};
-    }
-    verifyParts($hd); #- verify everything is all right
-}
-
-sub adjust_local_extended {
-    my ($hd, $part) = @_;
-
-    my $extended = find { $_->{normal} == $part } @{$hd->{extended} || []} or return;
-    $extended->{size} = $part->{size} + $part->{start} - $extended->{start};
-
-    #- must write it there too because values are not shared
-    my $prev = find { $_->{extended}{start} == $extended->{start} } @{$hd->{extended} || []} or return;
-    $prev->{extended}{size} = $part->{size} + $part->{start} - $prev->{extended}{start};
-}
-
-sub get_normal_parts {
-    my ($hd) = @_;
-
-    @{$hd->{primary}{normal} || []}, map { $_->{normal} } @{$hd->{extended} || []};
-}
-
-sub get_normal_parts_and_holes {
-    my ($hd) = @_;
-    my ($start, $last) = ($hd->first_usable_sector, $hd->last_usable_sector);
-
-    ref($hd) or print("get_normal_parts_and_holes: bad hd" . backtrace(), "\n");
-
-    my $minimal_hole = put_in_hash({ pt_type => 0 }, hd2minimal_part($hd));
-
-    my @l = map {
-	my $current = $start;
-	$start = $_->{start} + $_->{size};
-	my $hole = { start => $current, size => $_->{start} - $current, %$minimal_hole };
-	put_in_hash($hole, hd2minimal_part($hd));
-	$hole, $_;
-    } sort { $a->{start} <=> $b->{start} } grep { !isWholedisk($_) } get_normal_parts($hd);
-
-    push @l, { start => $start, size => $last - $start, %$minimal_hole };
-    grep { !isEmpty($_) || $_->{size} >= $hd->cylinder_size } @l;
-}
-
-sub read_one($$) {
-    my ($hd, $sector) = @_;
-    my ($pt, $info);
-
-    #- it can be safely considered that the first sector is used to probe the partition table
-    #- but other sectors (typically for extended partition ones) have to match this type!
-    if (!$sector) {
-	my @parttype = (
-	  if_(arch() =~ /^ia64/, 'gpt'),
-	  arch() =~ /^sparc/ ? ('sun', 'bsd') : ('dos', 'bsd', 'sun', 'mac'),
-	);
-	foreach ('empty', @parttype, 'unknown') {
-	    /unknown/ and die "unknown partition table format on disk " . $hd->{file};
-	    eval {
-		# perl_checker: require partition_table::bsd
-		# perl_checker: require partition_table::dos
-		# perl_checker: require partition_table::empty
-		# perl_checker: require partition_table::gpt
-		# perl_checker: require partition_table::mac
-		# perl_checker: require partition_table::sun
-		require "partition_table/$_.pm";
-		bless $hd, "partition_table::$_";
-		($pt, $info) = $hd->read($sector);
-		log::l("found a $_ partition table on $hd->{file} at sector $sector");
-	    };
-	    $@ or last;
-	}
-    } else {
-	#- keep current blessed object for that, this means it is neccessary to read sector 0 before.
-	($pt, $info) = $hd->read($sector);
-    }
-
-    my @extended = $hd->hasExtended ? grep { isExtended($_) } @$pt : ();
-    my @normal = grep { $_->{size} && !isEmpty($_) && !isExtended($_) } @$pt;
-    my $nb_special_empty = int(grep { $_->{size} && isEmpty($_) } @$pt);
-
-    @extended > 1 and die "more than one extended partition";
-
-    put_in_hash($_, hd2minimal_part($hd)) foreach @normal, @extended;
-    { raw => $pt, extended => $extended[0], normal => \@normal, info => $info, nb_special_empty => $nb_special_empty };
-}
-
-sub read {
-    my ($hd) = @_;
-    my $pt = read_one($hd, 0) or return 0;
-    $hd->{primary} = $pt;
-    undef $hd->{extended};
-    verifyPrimary($pt);
-    eval {
-	my $need_removing_empty_extended;
-	if ($pt->{extended}) {
-	    read_extended($hd, $pt->{extended}, \$need_removing_empty_extended) or return 0;
-	}
-	if ($need_removing_empty_extended) {
-	    #- special case when hda5 is empty, it must be skipped
-	    #- (windows XP generates such partition tables)
-	    remove_empty_extended($hd); #- includes adjust_main_extended
-	}
-	
-    }; 
-    die "extended partition: $@" if $@;
-
-    assign_device_numbers($hd);
-    remove_empty_extended($hd);
-
-    $hd->set_best_geometry_for_the_partition_table;
-    1;
-}
-
-sub read_extended {
-    my ($hd, $extended, $need_removing_empty_extended) = @_;
-
-    my $pt = read_one($hd, $extended->{start}) or return 0;
-    $pt = { %$extended, %$pt };
-
-    push @{$hd->{extended}}, $pt;
-    @{$hd->{extended}} > 100 and die "oops, seems like we're looping here :(  (or you have more than 100 extended partitions!)";
-
-    if (@{$pt->{normal}} == 0) {
-	$$need_removing_empty_extended = 1;
-	delete $pt->{normal};
-	print "need_removing_empty_extended\n";
-    } elsif (@{$pt->{normal}} > 1) {
-	die "more than one normal partition in extended partition";
-    } else {
-	$pt->{normal} = $pt->{normal}[0];
-	#- in case of extended partitions, the start sector is local to the partition or to the first extended_part!
-	$pt->{normal}{start} += $pt->{start};
-
-	#- the following verification can broke an existing partition table that is
-	#- correctly read by fdisk or cfdisk. maybe the extended partition can be
-	#- recomputed to get correct size.
-	if (!verifyInside($pt->{normal}, $extended)) {
-	    $extended->{size} = $pt->{normal}{start} + $pt->{normal}{size};
-	    verifyInside($pt->{normal}, $extended) or die "partition $pt->{normal}{device} is not inside its extended partition";
-	}
-    }
-
-    if ($pt->{extended}) {
-	$pt->{extended}{start} += $hd->{primary}{extended}{start};
-	return read_extended($hd, $pt->{extended}, $need_removing_empty_extended);
-    } else {
-	1;
-    }
-}
-
-sub will_tell_kernel {
-    my ($hd, $action, $o_part, $o_delay) = @_;
-
-    if ($action eq 'resize') {
-	will_tell_kernel($hd, del => $o_part);
-	will_tell_kernel($hd, add => $o_part);
-    } else {
-	my $part_number;
-	if ($o_part) {
-	    ($part_number) = $o_part->{device} =~ /(\d+)$/ or
-	      #- do not die, it occurs when we zero_MBR_and_dirty a raw_lvm_PV
-	      log::l("ERROR: will_tell_kernel bad device " . description($o_part)), return;
-	}
-
-	my @para =
-	  $action eq 'force_reboot' ? () :
-	  $action eq 'add' ? ($part_number, $o_part->{start}, $o_part->{size}) :
-	  $action eq 'del' ? $part_number :
-	  internal_error("unknown action $action");
-
-	push @{$hd->{'will_tell_kernel' . ($o_delay || '')} ||= []}, [ $action, @para ];
-    }
-    if (!$o_delay) {
-	foreach my $delay ('delay_del', 'delay_add') {
-	    my $l = delete $hd->{"will_tell_kernel$delay"} or next;
-	    push @{$hd->{will_tell_kernel} ||= []}, @$l;
-	}
-    }
-    $hd->{isDirty} = 1;
-}
-
-sub tell_kernel {
-    my ($hd, $tell_kernel) = @_;
-
-    my $F = partition_table::raw::openit($hd);
-
-    my $force_reboot = any { $_->[0] eq 'force_reboot' } @$tell_kernel;
-    if (!$force_reboot) {
-	foreach (@$tell_kernel) {
-	    my ($action, $part_number, $o_start, $o_size) = @$_;
-	    
-	    if ($action eq 'add') {
-		$force_reboot ||= !c::add_partition(fileno $F, $part_number, $o_start, $o_size);
-	    } elsif ($action eq 'del') {
-		$force_reboot ||= !c::del_partition(fileno $F, $part_number);
-	    }
-	    log::l("tell kernel $action ($hd->{device} $part_number $o_start $o_size), rebootNeeded is now " . bool2text($hd->{rebootNeeded}));
-	}
-    }
-    if ($force_reboot) {
-	my @magic_parts = grep { $_->{isMounted} && $_->{real_mntpoint} } get_normal_parts($hd);
-	foreach (@magic_parts) {
-	    syscall_('umount', $_->{real_mntpoint}) or log::l(N("error unmounting %s: %s", $_->{real_mntpoint}, $!));
-	}
-	$hd->{rebootNeeded} = !ioctl($F, c::BLKRRPART(), 0);
-	log::l("tell kernel force_reboot ($hd->{device}), rebootNeeded is now $hd->{rebootNeeded}.");
-
-	foreach (@magic_parts) {
-	    syscall_('mount', $_->{real_mntpoint}, $_->{fs_type}, c::MS_MGC_VAL()) or log::l(N("mount failed: ") . $!);
-	}
-    }
-}
-
-# write the partition table
-sub write {
-    my ($hd) = @_;
-    $hd->{isDirty} or return;
-    $hd->{readonly} and die "a read-only partition table should not be dirty!";
-
-    #- set first primary partition active if no primary partitions are marked as active.
-    if (my @l = @{$hd->{primary}{raw}}) {
-	foreach (@l) { 
-	    $_->{local_start} = $_->{start}; 
-	    $_->{active} ||= 0;
-	}
-	$l[0]{active} = 0x80 if !any { $_->{active} } @l;
-    }
-
-    #- last chance for verification, this make sure if an error is detected,
-    #- it will never be writed back on partition table.
-    verifyParts($hd);
-
-    $hd->write(0, $hd->{primary}{raw}, $hd->{primary}{info}) or die "writing of partition table failed";
-
-    #- should be fixed but a extended exist with no real extended partition, that blanks mbr!
-    if (arch() !~ /^sparc/) {
-	foreach (@{$hd->{extended}}) {
-	    # in case of extended partitions, the start sector must be local to the partition
-	    $_->{normal}{local_start} = $_->{normal}{start} - $_->{start};
-	    $_->{extended} and $_->{extended}{local_start} = $_->{extended}{start} - $hd->{primary}{extended}{start};
-
-	    $hd->write($_->{start}, $_->{raw}) or die "writing of partition table failed";
-	}
-    }
-    $hd->{isDirty} = 0;
-    $hd->{hasBeenDirty} = 1; #- used in undo (to know if undo should believe isDirty or not)
-
-    if (my $tell_kernel = delete $hd->{will_tell_kernel}) {
-	tell_kernel($hd, $tell_kernel);
-    }
-}
-
-sub active {
-    my ($hd, $part) = @_;
-
-    $_->{active} = 0 foreach @{$hd->{primary}{normal}};
-    $part->{active} = 0x80;
-    $hd->{isDirty} = 1;
-}
-
-
-# remove a normal partition from hard drive hd
-sub remove {
-    my ($hd, $part) = @_;
-    my $i;
-
-    #- first search it in the primary partitions
-    $i = 0; foreach (@{$hd->{primary}{normal}}) {
-	if ($_ eq $part) {
-	    will_tell_kernel($hd, del => $_);
-
-	    splice(@{$hd->{primary}{normal}}, $i, 1);
-	    %$_ = (); #- blank it
-
-	    $hd->raw_removed($hd->{primary}{raw});
-	    return 1;
-	}
-	$i++;
-    }
-
-    my ($first, $second, $third) = map { $_->{normal} } @{$hd->{extended} || []};
-    if ($third && $first eq $part) {
-	die "Can not handle removing hda5 when hda6 is not the second partition" if $second->{start} > $third->{start};
-    }      
-
-    #- otherwise search it in extended partitions
-    foreach (@{$hd->{extended} || []}) {
-	$_->{normal} eq $part or next;
-
-	delete $_->{normal}; #- remove it
-	remove_empty_extended($hd);
-	assign_device_numbers($hd);
-
-	will_tell_kernel($hd, del => $part);
-	return 1;
-    }
-    0;
-}
-
-# create of partition at starting at `start', of size `size' and of type `pt_type' (nice comment, uh?)
-sub add_primary {
-    my ($hd, $part) = @_;
-
-    {
-	local $hd->{primary}{normal}; #- save it to fake an addition of $part, that way add_primary do not modify $hd if it fails
-	push @{$hd->{primary}{normal}}, $part;
-	adjust_main_extended($hd); #- verify
-	$hd->raw_add($hd->{primary}{raw}, $part);
-    }
-    push @{$hd->{primary}{normal}}, $part; #- really do it
-}
-
-sub add_extended {
-    arch() =~ /^sparc|ppc/ and die N("Extended partition not supported on this platform");
-
-    my ($hd, $part, $extended_type) = @_;
-    $extended_type =~ s/Extended_?//;
-
-    my $e = $hd->{primary}{extended};
-
-    if ($e && !verifyInside($part, $e)) {
-	#-die "sorry, can not add outside the main extended partition" unless $::unsafe;
-	my $end = $e->{start} + $e->{size};
-	my $start = min($e->{start}, $part->{start});
-	$end = max($end, $part->{start} + $part->{size}) - $start;
-
-	{ #- faking a resizing of the main extended partition to test for problems
-	    local $e->{start} = $start;
-	    local $e->{size} = $end - $start;
-	    eval { verifyPrimary($hd->{primary}) };
-	    $@ and die
-N("You have a hole in your partition table but I can not use it.
-The only solution is to move your primary partitions to have the hole next to the extended partitions.");
-	}
-    }
-
-    if ($e && $part->{start} < $e->{start}) {
-	my $l = first(@{$hd->{extended}});
-
-	#- the first is a special case, must recompute its real size
-	$l->{start} = round_down($l->{normal}{start} - 1, $hd->cylinder_size);
-	$l->{size} = $l->{normal}{start} + $l->{normal}{size} - $l->{start};
-	my $ext = { %$l };
-	unshift @{$hd->{extended}}, { pt_type => 5, raw => [ $part, $ext, {}, {} ], normal => $part, extended => $ext };
-	#- size will be autocalculated :)
-    } else {
-	my ($ext, $ext_size) = is_empty_array_ref($hd->{extended}) ?
-	  ($hd->{primary}, -1) : #- -1 size will be computed by adjust_main_extended
-	  (top(@{$hd->{extended}}), $part->{size});
-	my %ext = (pt_type => $extended_type || 5, start => $part->{start}, size => $ext_size);
-
-	$hd->raw_add($ext->{raw}, \%ext);
-	$ext->{extended} = \%ext;
-	push @{$hd->{extended}}, { %ext, raw => [ $part, {}, {}, {} ], normal => $part };
-    }
-    $part->{start}++; $part->{size}--; #- let it start after the extended partition sector
-    adjustStartAndEnd($hd, $part);
-
-    adjust_main_extended($hd);
-}
-
-sub add {
-    my ($hd, $part, $b_primaryOrExtended, $b_forceNoAdjust) = @_;
-
-    get_normal_parts($hd) >= ($hd->{device} =~ /^rd/ ? 7 : $hd->{device} =~ /^(sd|ida|cciss|ataraid)/ ? 15 : 63) and cdie "maximum number of partitions handled by linux reached";
-
-    set_isFormatted($part, 0);
-    put_in_hash($part, hd2minimal_part($hd));
-    $part->{start} ||= 1 if arch() !~ /^sparc/; #- starting at sector 0 is not allowed
-    adjustStartAndEnd($hd, $part) unless $b_forceNoAdjust;
-
-    my $nb_primaries = $hd->{device} =~ /^rd/ ? 3 : 1;
-
-    if (arch() =~ /^sparc|ppc/ ||
-	$b_primaryOrExtended eq 'Primary' ||
-	$b_primaryOrExtended !~ /Extended/ && @{$hd->{primary}{normal} || []} < $nb_primaries) {
-	eval { add_primary($hd, $part) };
-	goto success if !$@;
-    }
-    if ($hd->hasExtended) {
-	eval { add_extended($hd, $part, $b_primaryOrExtended) };
-	goto success if !$@;
-    }
-    {
-	add_primary($hd, $part);
-    }
-  success:
-    assign_device_numbers($hd);
-    will_tell_kernel($hd, add => $part);
-}
-
-# search for the next partition
-sub next {
-    my ($hd, $part) = @_;
-
-    first(
-	  sort { $a->{start} <=> $b->{start} }
-	  grep { $_->{start} >= $part->{start} + $part->{size} }
-	  get_normal_parts($hd)
-	 );
-}
-sub next_start {
-    my ($hd, $part) = @_;
-    my $next = &next($hd, $part);
-    $next ? $next->{start} : $hd->{totalsectors};
-}
-
-sub load {
-    my ($hd, $file, $b_force) = @_;
-
-    my $F;
-    if (ref $file) {
-	$F = $file;
-    } else {
-	open($F, $file) or die N("Error reading file %s", $file);
-    }
-
-    my $h;
-    {
-	local $/ = "\0";
-	eval <$F>;
-    }
-    $@ and die N("Restoring from file %s failed: %s", $file, $@);
-
-    ref($h) eq 'ARRAY' or die N("Bad backup file");
-
-    my %h; @h{@fields2save} = @$h;
-
-    $h{totalsectors} == $hd->{totalsectors} or $b_force or cdie "bad totalsectors";
-
-    #- unsure we do not modify totalsectors
-    local $hd->{totalsectors};
-
-    @$hd{@fields2save} = @$h;
-
-    delete @$_{qw(isMounted isFormatted notFormatted toFormat toFormatUnsure)} foreach get_normal_parts($hd);
-    will_tell_kernel($hd, 'force_reboot'); #- just like undo, do not force write_partitions so that user can see the new partition table but can still discard it
-}
-
-sub save {
-    my ($hd, $file) = @_;
-    my @h = @$hd{@fields2save};
-    require Data::Dumper;
-    eval { output($file, Data::Dumper->Dump([\@h], ['$h']), "\0") }
-      or die N("Error writing to file %s", $file);
-}
-
-1;
diff --git a/perl-install/partition_table/bsd.pm b/perl-install/partition_table/bsd.pm
deleted file mode 100644
index 0e2421c25..000000000
--- a/perl-install/partition_table/bsd.pm
+++ /dev/null
@@ -1,147 +0,0 @@
-package partition_table::bsd; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table::raw);
-
-use common;
-use partition_table::raw;
-use partition_table;
-use c;
-
-#- very bad and rough handling :(
-my %pt_typeToDos = (
-  8 => 0x83,
-  1 => 0x82,
-);
-my %pt_typeFromDos = reverse %pt_typeToDos;
-
-my ($main_format, $main_fields) = list2kv(
-  I   => 'magic',
-  S   => 'type',
-  S   => 'subtype',
-  a16 => 'typename',
-  a16 => 'packname',
-  I   => 'secsize',
-  I   => 'nsectors',
-  I   => 'ntracks',
-  I   => 'ncylinders',
-  I   => 'secpercyl',
-  I   => 'secprtunit',
-  S   => 'sparespertrack',
-  S   => 'sparespercyl',
-  I   => 'acylinders',
-  S   => 'rpm',
-  S   => 'interleave',
-  S   => 'trackskew',
-  S   => 'cylskew',
-  I   => 'headswitch',
-  I   => 'trkseek',
-  I   => 'flags',
-  a20 => 'drivedata',
-  a20 => 'spare',
-  I   => 'magic2',
-  S   => 'checksum',
-  S   => 'npartitions',
-  I   => 'bbsize',
-  I   => 'sbsize',
-  a128 => 'partitions',
-  a236 => 'blank',
-);
-$main_format = join '', @$main_format;
-
-my @fields = qw(size start fsize pt_type frag cpg);
-my $format = "I I I C C S";
-my $magic = 0x82564557;
-my $nb_primary = 8;
-my $offset = 0x40;
-
-sub read($$) {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    my $F = partition_table::raw::openit($hd) or die "failed to open device";
-    c::lseek_sector(fileno($F), $sector, $offset) or die "reading of partition in sector $sector failed";
-
-    sysread $F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
-    my %info; @info{@$main_fields} = unpack $main_format, $tmp;
-
-    #- TODO verify checksum
-
-    my $size = psizeof($format);
-    my @pt = map {
-	my %h; @h{@fields} = unpack $format, $_;
-	fs::type::set_pt_type(\%h, $pt_typeToDos{$h{pt_type}} || $h{pt_type});
-	\%h;
-    } $info{partitions} =~ /(.{$size})/g;
-
-    #- check magic number
-    $info{magic}  == $magic or die "bad magic number on disk $hd->{device}";
-    $info{magic2} == $magic or die "bad magic number on disk $hd->{device}";
-
-    [ @pt ], \%info;
-}
-
-# write the partition table (and extended ones)
-# for each entry, it uses fields: start, size, pt_type, active
-sub write($$$;$) {
-    my ($hd, $sector, $pt, $info) = @_;
-
-    #- handle testing for writing partition table on file only!
-    my $F;
-    if ($::testing) {
-	my $file = "/tmp/partition_table_$hd->{device}";
-	open $F, ">$file" or die "error opening test file $file";
-    } else {
-	$F = partition_table::raw::openit($hd, 2) or die "error opening device $hd->{device} for writing";
-        c::lseek_sector(fileno($F), $sector, $offset) or return 0;
-    }
-
-    #- TODO compute checksum
-
-    $info->{npartitions} = $nb_primary; #- is it ok?
-
-    @$pt == $nb_primary or die "partition table does not have $nb_primary entries";
-    $info->{partitions} = join '', map {
-	local $_->{pt_type} = $pt_typeFromDos{$_->{pt_type}} || $_->{pt_type};
-	pack $format, @$_{@fields};
-    } @$pt;
-
-    syswrite $F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
-    1;
-}
-
-sub info {
-    my ($hd) = @_;
-    my $dtype_scsi  = 4; #- taken from fdisk, removed unused one,
-    my $dtype_ST506 = 6; #- see fdisk for more
-
-    {
-      magic => $magic,
-      magic2 => $magic,
-      dtype => $hd->{device} =~ /^sd/ ? $dtype_scsi : $dtype_ST506,
-      secsize => $common::SECTORSIZE,
-      ncylinders => $hd->{geom}{cylinders},
-      secpercyl => $hd->cylinder_size,
-      secprtunit => $hd->{geom}{totalsectors},
-      rpm => 3600,
-      interleave => 1,
-      trackskew => 0,
-      cylskew => 0,
-      headswitch => 0,
-      trkseek => 0,
-      bbsize => 8192, #- size of boot area, with label
-      sbsize => 8192, #- max size of fs superblock
-    };
-}
-
-sub clear_raw {
-    my ($hd) = @_;
-    { raw => [ ({}) x $nb_primary ], info => info($hd) };
-}
-
-sub first_usable_sector { 2048 }
-
-1;
diff --git a/perl-install/partition_table/dos.pm b/perl-install/partition_table/dos.pm
deleted file mode 100644
index 8d8109723..000000000
--- a/perl-install/partition_table/dos.pm
+++ /dev/null
@@ -1,250 +0,0 @@
-package partition_table::dos; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table::raw);
-
-use common;
-use partition_table::raw;
-use partition_table;
-use c;
-
-my @fields = qw(active start_head start_sec start_cyl pt_type end_head end_sec end_cyl start size);
-my $format = "C8 V2";
-my $magic = "\x55\xAA";
-my $nb_primary = 4;
-
-my $offset = $common::SECTORSIZE - length($magic) - $nb_primary * common::psizeof($format);
-
-sub hasExtended { 1 }
-
-sub geometry_to_string {
-    my ($geom) = @_;
-    "$geom->{cylinders}/$geom->{heads}/$geom->{sectors}";
-}
-
-sub last_usable_sector { 
-    my ($hd) = @_;
-    #- do not use totalsectors, see gi/docs/Partition-ends-after-end-of-disk.txt for more
-    $hd->{geom}{sectors} * $hd->{geom}{heads} * $hd->{geom}{cylinders};
-}
-
-sub get_rawCHS {
-    my ($part) = @_;
-
-    exists $part->{start_cyl} or internal_error("get_rawCHS $part->{device}");
-
-    [ $part->{start_cyl}, $part->{start_head}, $part->{start_sec} ],
-      [ $part->{end_cyl}, $part->{end_head}, $part->{end_sec} ];
-}
-sub set_rawCHS {
-    my ($part, $raw_chs_start, $raw_chs_end) = @_;   
-    ($part->{start_cyl}, $part->{start_head}, $part->{start_sec}) = @$raw_chs_start;
-    ($part->{end_cyl}, $part->{end_head}, $part->{end_sec}) = @$raw_chs_end;
-}
-
-sub compute_CHS {
-    my ($hd, $part) = @_;
-    my ($chs_start, $chs_end) = CHS_from_part_linear($hd->{geom}, $part);
-    set_rawCHS($part, $chs_start ? CHS2rawCHS($hd->{geom}, $chs_start) : [0,0,0], 
-	              $chs_end ? CHS2rawCHS($hd->{geom}, $chs_end) : [0,0,0]);
-}
-
-sub CHS_from_part_rawCHS {
-    my ($part) = @_;
-
-    $part->{start} || $part->{pt_type} or return;
-
-    my ($raw_chs_start, $raw_chs_end) = get_rawCHS($part);
-    rawCHS2CHS($raw_chs_start), rawCHS2CHS($raw_chs_end);
-}
-
-sub CHS_from_part_linear {
-    my ($geom, $part) = @_;
-
-    $part->{start} || $part->{pt_type} or return;
-
-    sector2CHS($geom, $part->{start}), sector2CHS($geom, $part->{start} + $part->{size} - 1);
-}
-
-sub rawCHS2CHS {
-    my ($chs) = @_;
-    my ($c, $h, $s) = @$chs;
-    [ $c | (($s & 0xc0) << 2), $h, ($s & 0x3f) - 1 ];
-}
-
-sub CHS2rawCHS {
-    my ($geom, $chs) = @_;
-    my ($c, $h, $s) = @$chs;
-    if ($c > 1023) {
-	#- no way to have a #cylinder >= 1024
-	$c = 1023;
-	$h = $geom->{heads} - 1;
-	$s = $geom->{sectors} - 1;
-    }
-    [ $c & 0xff, $h, ($s + 1) | (($c >> 2) & 0xc0) ];
-}
-
-# returns (cylinder, head, sector)
-sub sector2CHS {
-    my ($geom, $start) = @_;
-    my ($s, $h);
-    ($start, $s) = divide($start, $geom->{sectors});
-    ($start, $h) = divide($start, $geom->{heads});
-    [ $start, $h, $s ];
-}
-
-sub is_geometry_valid_for_the_partition_table {
-    my ($hd, $geom, $no_log) = @_;
-
-    every {
-	my ($chs_start_v1, $chs_end_v1) = map { join(',', @$_) } CHS_from_part_rawCHS($_) or next;
-	my ($chs_start_v2, $chs_end_v2) = map { join(',', @$_) } map { [ min($_->[0], 1023), $_->[1], $_->[2] ] } CHS_from_part_linear($geom, $_);
-	if (!$no_log) {
-	    $chs_start_v1 eq $chs_start_v2 or log::l("check_geometry_using_the_partition_table failed for ($_->{device}, $_->{start}): $chs_start_v1 vs $chs_start_v2 with geometry " . geometry_to_string($geom));
-	    $chs_end_v1 eq $chs_end_v2 or log::l("check_geometry_using_the_partition_table failed for ($_->{device}, " . ($_->{start} + $_->{size} - 1) . "): $chs_end_v1 vs $chs_end_v2 with geometry " . geometry_to_string($geom));
-	}
-	$chs_start_v1 eq $chs_start_v2 && $chs_end_v1 eq $chs_end_v2;
-    } @{$hd->{primary}{normal} || []};
-}
-
-#- from parted, thanks!
-my @valid_nb_sectors = (63, 61, 48, 32, 16);
-my @valid_nb_heads = (255, 240, 192, 128, 96, 64, 61, 32, 17, 16);
-
-sub guess_geometry_from_partition_table {
-    my ($hd) = @_;
-
-    my @chss = map { CHS_from_part_rawCHS($_) } @{$hd->{primary}{normal} || []} or return { empty => 1 };
-    my ($nb_heads, $nb_sectors) = (max(map { $_->[1] } @chss) + 1, max(map { $_->[2] } @chss) + 1);    
-    my $geom = { sectors => $nb_sectors, heads => $nb_heads };
-    partition_table::raw::compute_nb_cylinders($geom, $hd->{totalsectors});
-    log::l("guess_geometry_from_partition_table $hd->{device}: " . geometry_to_string($geom));
-
-    member($geom->{sectors}, @valid_nb_sectors) or return { invalid => 1 };
-    $geom;
-}
-
-sub geometry_from_edd {
-    my ($hd, $edd_dir) = @_;
-
-    my $sectors = cat_("$edd_dir/legacy_sectors_per_track") or return;
-    my $heads = cat_("$edd_dir/legacy_max_head") or return;
-
-    my $geom = { sectors => 0 + $sectors, heads => 1 + $heads, from_edd => 1 };
-    is_geometry_valid_for_the_partition_table($hd, $geom, 0) or return;
-    partition_table::raw::compute_nb_cylinders($geom, $hd->{totalsectors});
-
-    log::l("geometry_from_edd $hd->{device} $hd->{volume_id}: " . geometry_to_string($geom));
-    
-    $geom;
-}
-
-
-sub try_every_geometry {
-    my ($hd) = @_;
-
-    my $geom = {};
-    foreach (@valid_nb_sectors) {
-	$geom->{sectors} = $_;
-	foreach (@valid_nb_heads) {
-	    $geom->{heads} = $_;
-	    if (is_geometry_valid_for_the_partition_table($hd, $geom, 1)) {
-		partition_table::raw::compute_nb_cylinders($geom, $hd->{totalsectors});
-		log::l("try_every_geometry $hd->{device}: found " . geometry_to_string($geom));
-		return $geom;
-	    }
-	}
-    }
-    log::l("$hd->{device}: argh! no geometry exists for this partition table");
-    undef;
-}
-
-sub set_best_geometry_for_the_partition_table {
-    my ($hd) = @_;
-
-    my $guessed_geom = guess_geometry_from_partition_table($hd);
-    if ($guessed_geom->{empty}) {
-	log::l("$hd->{device}: would need looking at BIOS info to find out geometry") if !$hd->{geom}{from_edd};
-	return;
-    } 
-    my $default_ok = is_geometry_valid_for_the_partition_table($hd, $hd->{geom}, 0);
-    if ($guessed_geom->{invalid}) {
-	log::l("$hd->{device}: no valid geometry guessed from partition table");
-	$default_ok and return;
-	$guessed_geom = try_every_geometry($hd) or return;
-    }
-    
-    if ($guessed_geom->{heads} == $hd->{geom}{heads} && $guessed_geom->{sectors} == $hd->{geom}{sectors}) {
-	# cool!
-    } else {
-	my $guessed_ok = is_geometry_valid_for_the_partition_table($hd, $guessed_geom, 0);
-	if ($default_ok && $guessed_ok) {
-	    #- oh my!?
-	    log::l("$hd->{device}: both guessed and default are valid??? " . geometry_to_string($hd->{geom}) . " vs " . geometry_to_string($guessed_geom));	    
-	} elsif ($default_ok) {
-	    log::l("$hd->{device}: keeping default geometry " . geometry_to_string($hd->{geom}));	    
-	} elsif ($guessed_ok) {
-	    log::l("$hd->{device}: using guessed geometry " . geometry_to_string($guessed_geom) . " instead of " . geometry_to_string($hd->{geom}));
-	    put_in_hash($hd->{geom}, $guessed_geom);
-	} else {
-	    log::l("$hd->{device}: argh! no valid geometry found");	    
-	}
-    }
-}
-
-sub read {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    my $F = partition_table::raw::openit($hd) or die "failed to open device";
-    c::lseek_sector(fileno($F), $sector, $offset) or die "reading of partition in sector $sector failed";
-
-    my @pt = map {
-	sysread $F, $tmp, psizeof($format) or die "error while reading partition table in sector $sector";
-	my %h; 
-	@h{@fields} = unpack $format, $tmp;
-	fs::type::set_pt_type(\%h, $h{pt_type});
-	\%h;
-    } (1..$nb_primary);
-
-    #- check magic number
-    sysread $F, $tmp, length $magic or die "error reading magic number on disk $hd->{device}";
-    $tmp eq $magic or die "bad magic number on disk $hd->{device}";
-
-    [ @pt ];
-}
-
-# write the partition table (and extended ones)
-# for each entry, it uses fields: start, size, pt_type, active
-sub write {
-    my ($hd, $sector, $pt) = @_;
-
-    log::l("partition::dos::write $hd->{device}");
-
-    #- handle testing for writing partition table on file only!
-    my $F;
-    if ($::testing) {
-	my $file = "/tmp/partition_table_$hd->{device}";
-	open $F, ">$file" or die "error opening test file $file";
-    } else {
-	$F = partition_table::raw::openit($hd, 2) or die "error opening device $hd->{device} for writing";
-        c::lseek_sector(fileno($F), $sector, $offset) or return 0;
-    }
-
-    @$pt == $nb_primary or die "partition table does not have $nb_primary entries";
-    foreach (@$pt) {
-	compute_CHS($hd, $_);
-	local $_->{start} = $_->{local_start} || 0;
-	$_->{active} ||= 0; $_->{pt_type} ||= 0; $_->{size} ||= 0; #- for no warning
-	syswrite $F, pack($format, @$_{@fields}), psizeof($format) or return 0;
-    }
-    syswrite $F, $magic, length $magic or return 0;
-    1;
-}
-
-sub clear_raw { { raw => [ ({}) x $nb_primary ] } }
-
-1;
diff --git a/perl-install/partition_table/empty.pm b/perl-install/partition_table/empty.pm
deleted file mode 100644
index b34b9210c..000000000
--- a/perl-install/partition_table/empty.pm
+++ /dev/null
@@ -1,36 +0,0 @@
-package partition_table::empty; # $Id$
-
-#- this is a mainly dummy partition table. If we find it's empty, we just call -
-#- zero_MBR which will take care of bless'ing us to the partition table type best
-#- suited
-
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table::raw);
-
-use common;
-use partition_table::raw;
-use partition_table;
-use c;
-
-
-sub read($$) {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    my $F = partition_table::raw::openit($hd) or die "failed to open device";
-    c::lseek_sector(fileno($F), $sector, 0) or die "reading of partition in sector $sector failed";
-
-    #- check magic number
-    sysread $F, $tmp, 1024 or die "error reading magic number on disk $hd->{device}";
-    $tmp eq substr($tmp, 0, 1) x 1024 or die "bad magic number on disk $hd->{device}";
-
-    partition_table::raw::zero_MBR($hd);
-
-    $hd->{primary}{raw}, $hd->{primary}{info};
-}
-
-1;
diff --git a/perl-install/partition_table/gpt.pm b/perl-install/partition_table/gpt.pm
deleted file mode 100644
index d5c05e8de..000000000
--- a/perl-install/partition_table/gpt.pm
+++ /dev/null
@@ -1,263 +0,0 @@
-package partition_table::gpt; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table::raw);
-
-use common;
-use partition_table::raw;
-use partition_table::dos;
-use partition_table;
-use c;
-
-my %gpt_types = (
-  0x00 => "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00",
-  0x82 => "\x6d\xfd\x57\x06\xab\xa4\xc4\x43\x84\xe5\x09\x33\xc8\x4b\x4f\x4f",
-  0x83 => "\xA2\xA0\xD0\xEB\xE5\xB9\x33\x44\x87\xC0\x68\xB6\xB7\x26\x99\xC7",
-  0x8e => "\x79\xd3\xd6\xe6\x07\xf5\xc2\x44\xa2\x3c\x23\x8f\x2a\x3d\xf9\x28",
-  0xfd => "\x0f\x88\x9d\xa1\xfc\x05\x3b\x4d\xa0\x06\x74\x3f\x0f\x84\x91\x1e",
-  0xef => "\x28\x73\x2A\xC1\x1F\xF8\xd2\x11\xBA\x4B\x00\xA0\xC9\x3E\xC9\x3B",
-  # legacy_partition_table => "\x41\xEE\x4D\x02\xE7\x33\xd3\x11\x9D\x69\x00\x08\xC7\x81\xF3\x9F"
-  # PARTITION_MSFT_RESERVED_GUID "\x16\xE3\xC9\xE3\x5C\x0B\xB8\x4D\x81\x7D\xF9\x2D\xF0\x02\x15\xAE"
-  #PARTITION_RESERVED_GUID "\x39\x33\xa6\x8d\x07\x00\xc0\x60\xc4\x36\x08\x3a\xc8\x23\x09\x08"
-);
-
-my $current_revision = 0x00010200;
-my ($main_format, $main_fields) = list2kv(
-  a8    => 'magic',
-  V     => 'revision',
-  V     => 'headerSize',
-  V     => 'headerCRC32',
-  a4    => 'blank1',
-  Q     => 'myLBA',
-  Q     => 'alternateLBA',
-  Q     => 'firstUsableLBA',
-  Q     => 'lastUsableLBA',
-  a16   => 'guid',
-  Q     => 'partitionEntriesLBA',
-  V     => 'nbPartitions',
-  V     => 'partitionEntrySize',
-  V     => 'partitionEntriesCRC32',
-);
-
-my ($partitionEntry_format, $partitionEntry_fields) = list2kv(
-  a16   => 'gpt_type',
-  a16   => 'guid',
-  Q     => 'start',
-  Q     => 'ending',
-  a8    => 'efi_attributes',
-  a72   => 'name',
-);
-
-my ($guid_format, $guid_fields) = list2kv(
-  N     => 'time_low',
-  n     => 'time_mid',
-  n     => 'time_hi_and_version',
-  n     => 'clock_seq',
-  a6    => 'node',
-);
-
-$_ = join('', @$_) foreach $main_format, $partitionEntry_format, $guid_format;
-
-my $magic = "EFI PART";
-
-sub generate_guid() {
-    my $tmp;
-    open(my $F, devices::make("random")) or die "Could not open /dev/random for GUID generation";
-    read $F, $tmp, psizeof($guid_format);
-	
-    my %guid; @guid{@$guid_fields} = unpack $guid_format, $tmp;
-    $guid{clock_seq} = ($guid{clock_seq} & 0x3fff) | 0x8000;
-    $guid{time_hi_and_version} = ($guid{time_hi_and_version} & 0x0fff) | 0x4000;
-    pack($guid_format, @guid{@$guid_fields});
-}
-
-sub crc32 {
-    my ($buffer) = @_;
-
-    my $crc = 0xFFFFFFFF;
-    foreach (unpack "C*", $buffer) {
-	my $subcrc = ($crc ^ $_) & 0xFF;
-        for (my $j = 8; $j > 0; $j--) {
-	    my $b = $subcrc & 1;
-	    $subcrc = ($subcrc >> 1) & 0x7FFFFFFF;
-	    $subcrc = $subcrc ^ 0xEDB88320 if $b;
-        }
-        $crc = ($crc >> 8) ^ $subcrc;
-    }
-    $crc ^ 0xFFFFFFFF;
-}
-
-sub compute_headerCRC32 {
-    my ($info) = @_;
-    local $info->{headerCRC32} = 0;
-    crc32(pack($main_format, @$info{@$main_fields}));
-}
-
-sub read_header {
-    my ($sector, $F) = @_;
-    my $tmp;
-
-    c::lseek_sector(fileno($F), $sector, 0) or die "reading of partition in sector $sector failed";
-
-    sysread $F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
-    my %info; @info{@$main_fields} = unpack $main_format, $tmp;
-    
-    $info{magic} eq $magic or die "bad magic number";
-    $info{myLBA} == $sector or die "myLBA is not the same";
-    $info{headerSize} == psizeof($main_format) or die "bad partition table header size";
-    $info{partitionEntrySize} == psizeof($partitionEntry_format) or die "bad partitionEntrySize";
-    $info{revision} <= $current_revision or log::l("oops, this is a new GPT revision ($info{revision} > $current_revision)");
-
-    $info{headerCRC32} == compute_headerCRC32(\%info) or die "bad partition table checksum";
-    \%info;
-}
-
-sub read_partitionEntries {
-    my ($info, $F) = @_;
-    my $tmp;
-
-    c::lseek_sector(fileno($F), $info->{partitionEntriesLBA}, 0) or die "can not seek to sector partitionEntriesLBA";
-    sysread $F, $tmp, psizeof($partitionEntry_format) * $info->{nbPartitions} or die "error while reading partition table in sector $info->{partitionEntriesLBA}";
-    $info->{partitionEntriesCRC32} == crc32($tmp) or die "bad partition entries checksum";
-
-    c::lseek_sector(fileno($F), $info->{partitionEntriesLBA}, 0) or die "can not seek to sector partitionEntriesLBA";
-    my %gpt_types_rev = reverse %gpt_types;
-    my @pt = 
-      map {
-	sysread $F, $tmp, psizeof($partitionEntry_format) or die "error while reading partition table in sector $info->{partitionEntriesLBA}";
-	my %h; @h{@$partitionEntry_fields} = unpack $partitionEntry_format, $tmp;
-	$h{size} = $h{ending} - $h{start} + 1;
-	my $pt_type = $gpt_types_rev{$h{gpt_type}};
-	fs::type::set_pt_type(\%h, defined $pt_type ? $pt_type : 0x100);
-	\%h;
-    } (1 .. $info->{nbPartitions});
-    \@pt;
-}
-
-sub read {
-    my ($hd, $sector) = @_;
-
-    my $l = partition_table::dos::read($hd, $sector);
-    my @l = grep { $_->{size} && $_->{pt_type} && !partition_table::isExtended($_) } @$l;
-    @l == 1 or die "bad PMBR";
-    $l[0]{pt_type} == 0xee or die "bad PMBR";
-    my $myLBA = $l[0]{start};
-
-    my $F = partition_table::raw::openit($hd) or die "failed to open device";
-    my $info1 = eval { read_header($myLBA, $F) };
-    my $info2 = eval { read_header($info1->{alternateLBA} || $l[0]{start} + $l[0]{size} - 1, $F) }; #- what about using $hd->{totalsectors} ???
-    my $info = $info1 || { %$info2, myLBA => $info2->{alternateLBA}, alternateLBA => $info2->{myLBA}, partitionEntriesLBA => $info2->{alternateLBA} + 1 } or die;
-    my $pt = $info1 && $info2 ? 
-	eval { $info1 && read_partitionEntries($info1, $F) } || read_partitionEntries($info2, $F) :
-	read_partitionEntries($info, $F);
-    $hd->raw_removed($pt);
-
-    $pt, $info;
-}
-
-# write the partition table (and extended ones)
-# for each entry, it uses fields: start, size, pt_type, active
-sub write {
-    my ($hd, $sector, $pt, $info) = @_;
-
-    foreach (@$pt) {
-	$_->{ending} = $_->{start} + $_->{size} - 1;
-	$_->{guid} ||= generate_guid();
-	$_->{gpt_type} = $gpt_types{$_->{pt_type}} || $_->{gpt_type} || $gpt_types{0x83};
-    }
-    my $partitionEntries = join('', map {
-	pack($partitionEntry_format, @$_{@$partitionEntry_fields});	
-    } (@$pt, ({}) x ($info->{nbPartitions} - @$pt)));
-
-    $info->{partitionEntriesCRC32} = crc32($partitionEntries);
-    $info->{headerCRC32} = compute_headerCRC32($info);
-
-    my $info2 = { %$info, 
-		  myLBA => $info->{alternateLBA}, alternateLBA => $info->{myLBA}, 
-		  partitionEntriesLBA => $info->{alternateLBA} - psizeof($partitionEntry_format) * $info->{nbPartitions} / 512,
-		};
-    $info2->{headerCRC32} = compute_headerCRC32($info2);
-
-    {
-	# write the PMBR
-	my $pmbr = partition_table::dos::clear_raw();
-	$pmbr->{raw}[0] = { pt_type => 0xee, local_start => $info->{myLBA}, size => $info->{alternateLBA} - $info->{myLBA} + 1 };
-	partition_table::dos::write($hd, $sector, $pmbr->{raw});
-    }
-
-    my $F = partition_table::raw::openit($hd, 2) or die "error opening device $hd->{device} for writing";
-    
-    c::lseek_sector(fileno($F), $info->{myLBA}, 0) or return 0;
-    #- pad with 0's
-    syswrite $F, pack($main_format, @$info{@$main_fields}) . "\0" x 512, 512 or return 0;
-
-    c::lseek_sector(fileno($F), $info->{alternateLBA}, 0) or return 0;
-    #- pad with 0's
-    syswrite $F, pack($main_format, @$info2{@$main_fields}) . "\0" x 512, 512 or return 0;
-
-    c::lseek_sector(fileno($F), $info->{partitionEntriesLBA}, 0) or return 0;
-    syswrite $F, $partitionEntries or return 0;
-    
-    c::lseek_sector(fileno($F), $info2->{partitionEntriesLBA}, 0) or return 0;
-    syswrite $F, $partitionEntries or return 0;
-
-    common::sync();
-    1;
-}
-
-sub raw_removed {
-    my ($_hd, $raw) = @_;
-    @$raw = grep { $_->{size} && $_->{pt_type} } @$raw;
-}
-sub can_raw_add {
-    my ($hd) = @_;
-    @{$hd->{primary}{raw}} < $hd->{primary}{info}{nbPartitions};
-}
-sub raw_add {
-    my ($hd, $raw, $part) = @_;
-    $hd->can_raw_add or die "raw_add: partition table already full";
-    push @$raw, $part;
-}
-
-sub adjustStart {}
-sub adjustEnd {}
-
-sub first_usable_sector {
-    my ($hd) = @_;
-    $hd->{primary}{info}{firstUsableLBA};
-}
-sub last_usable_sector { 
-    my ($hd) = @_;
-    $hd->{primary}{info}{lastUsableLBA} + 1;
-}
-
-sub info {
-    my ($hd) = @_;
-    my $nb_sect = 32;
-
-    #- build a default suitable partition table,
-    #- checksum will be built when writing on disk.
-    {
-	magic => $magic,
-	revision => $current_revision,
-	headerSize => psizeof($main_format),
-	myLBA => 1,
-	alternateLBA => $hd->{totalsectors} - 1,
-	firstUsableLBA => $nb_sect + 2,
-	lastUsableLBA => $hd->{totalsectors} - $nb_sect - 2,
-	guid => generate_guid(),
-	partitionEntriesLBA => 2,
-	nbPartitions => $nb_sect * 512 / psizeof($partitionEntry_format),
-	partitionEntrySize => psizeof($partitionEntry_format),
-    };
-}
-
-sub clear_raw {
-    my ($hd) = @_;
-    { raw => [], info => info($hd) };
-}
-
-1;
diff --git a/perl-install/partition_table/mac.pm b/perl-install/partition_table/mac.pm
deleted file mode 100644
index fc0310b74..000000000
--- a/perl-install/partition_table/mac.pm
+++ /dev/null
@@ -1,393 +0,0 @@
-package partition_table::mac; # $Id$
-
-use diagnostics;
-#use strict;   - fixed other PPC code to comply, but program bails on empty partition table - sbenedict
-use vars qw(@ISA $freepart $bootstrap_part $macos_part);
-
-@ISA = qw(partition_table::raw);
-
-use common;
-use fs::type;
-use partition_table::raw;
-use partition_table;
-use c;
-
-my %_typeToDos = (
-  "Apple_partition_map" => 0x401,
-  "Apple_Bootstrap"	=> 0x401,
-  "Apple_Driver43"	=> 0x401,
-  "Apple_Driver_IOKit"	=> 0x401,
-  "Apple_Patches"	=> 0x401,
-  "Apple_HFS"		=> 0x402,
-  "Apple_UNIX_SVR2"	=> 0x83,
-  "Apple_UNIX_SVR2"     => 0x183,
-  "Apple_UNIX_SVR2"     => 0x283,
-  "Apple_UNIX_SVR2"     => 0x383,
-  "Apple_UNIX_SVR2"     => 0x483,
-  "Apple_Free"		=> 0x0,
-);
-
-
-my ($bz_format, $bz_fields) = list2kv(
-  n	=> 'bzSig',
-  n	=> 'bzBlkSize',
-  N	=> 'bzBlkCnt',
-  n	=> 'bzDevType',
-  n	=> 'bzDevID',
-  N	=> 'bzReserved',
-  n	=> 'bzDrvrCnt',
-);
-$bz_format = join '', @$bz_format;
-
-
-my ($dd_format, $dd_fields) = list2kv(
-  N	=> 'ddBlock',
-  n	=> 'ddSize',
-  n	=> 'ddType',
-);
-$dd_format = join '', @$dd_format;
-
-
-my ($p_format, $p_fields) = list2kv(
-  n	=> 'pSig',
-  n	=> 'pSigPad',
-  N	=> 'pMapEntry',
-  N	=> 'pPBlockStart',
-  N	=> 'pPBlocks',
-
-  a32	=> 'pName',
-  a32	=> 'pType',
-
-  N	=> 'pLBlockStart',
-  N	=> 'pLBlocks',
-  N	=> 'pFlags',
-  N	=> 'pBootBlock',
-  N	=> 'pBootBytes',
-
-  N	=> 'pAddrs1',
-  N	=> 'pAddrs2',
-  N	=> 'pAddrs3',
-  N	=> 'pAddrs4',
-  N	=> 'pChecksum',
-
-  a16	=> 'pProcID',
-  a128	=> 'pBootArgs',
-  a248	=> 'pReserved',
-);
-$p_format = join '', @$p_format;
-
-my $magic = 0x4552;
-my $pmagic = 0x504D;
-
-sub first_usable_sector { 1 }
-
-sub adjustStart($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-    my $partmap_end = $hd->{primary}{raw}[0]{size};
-
-    if ($part->{start} <= $partmap_end) {
-        $part->{start} = $partmap_end + 1;
-        $part->{size} = $end - $part->{start};
-    }
-}
-
-sub adjustEnd($$) {
-    my ($_hd, $_part) = @_;
-}
-
-sub read($$) {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    my $F = partition_table::raw::openit($hd) or die "failed to open device";
-    c::lseek_sector(fileno($F), $sector, 0) or die "reading of partition in sector $sector failed";
-
-    sysread $F, $tmp, psizeof($bz_format) or die "error while reading bz (Block Zero) in sector $sector";
-    my %info; @info{@$bz_fields} = unpack $bz_format, $tmp;
-
-    foreach (1 .. $info{bzDrvrCnt}) {
-        sysread $F, $tmp, psizeof($dd_format) or die "error while reading driver data in sector $sector";
-        my %dd; @dd{@$dd_fields} = unpack $dd_format, $tmp;
-        push @{$info{ddMap}}, \%dd;
-    }
-
-    #- check magic number
-    $info{bzSig}  == $magic or die "bad magic number on disk $hd->{device}";
-
-    my $numparts;
-    c::lseek_sector(fileno($F), $sector, 516) or die "reading of partition in sector $sector failed";
-    sysread $F, $tmp, 4 or die "error while reading partition info in sector $sector";
-    $numparts = unpack "N", $tmp;
-
-    my $partmapsize;
-    c::lseek_sector(fileno($F), $sector, 524) or die "reading of partition in sector $sector failed";
-    sysread $F, $tmp, 4 or die "error while reading partition info in sector $sector";
-    $partmapsize = ((unpack "N", $tmp) * $info{bzBlkSize}) / psizeof($p_format);
-
-    c::lseek_sector(fileno($F), $sector, 512) or die "reading of partition in sector $sector failed";
-
-    my @pt;
-    for (my $i = 0; $i < $partmapsize; $i++) {
-    	my $part;
-        sysread $F, $part, psizeof($p_format) or die "error while reading partition info in sector $sector";
-
-        push @pt, map {
-            my %h; @h{@$p_fields} = unpack $p_format, $part;
-            if ($i < $numparts && $h{pSig} eq $pmagic) {
-
-                $h{size} = ($h{pPBlocks} * $info{bzBlkSize}) / 512;
-                $h{start} = ($h{pPBlockStart} * $info{bzBlkSize}) / 512;
-
-                if ($h{pType} =~ /^Apple_UNIX_SVR2/i) {
-		    $h{fs_type} = $h{pName} =~ /swap/i ? 'swap' : 'ext2';
-                } elsif ($h{pType} =~ /^Apple_Free/i) {
-                	#- need to locate a 1MB partition to setup a bootstrap on
-                	if ($freepart && $freepart->{size} >= 1) {
-			    #- already found a suitable partition
-                	} else {
-			    $freepart = { start => $h{start}, size => $h{size}/2048, hd => $hd, part => "/dev/$hd->{device}" . ($i+1) };
-			    log::l("free apple partition found on drive /dev/$freepart->{hd}{device}, block $freepart->{start}, size $freepart->{size}");
-                	}
-			$h{pt_type} = 0x0;
-			$h{pName} = 'Extra';                    
-                } elsif ($h{pType} =~ /^Apple_HFS/i) {
-			fs::type::set_pt_type(\%h, 0x402);
-                 	if (defined $macos_part) {		
-                 		#- swag at identifying MacOS - 1st HFS partition
-                 	} else {	
-                 		$macos_part = "/dev/" . $hd->{device} . ($i+1);
-                 		log::l("found MacOS at partition $macos_part");
-                 	}
-                } elsif ($h{pType} =~ /^Apple_Partition_Map/i) {
-                 	$h{pt_type} = 0x401;
-                 	$h{isMap} = 1;
-                } elsif ($h{pType} =~ /^Apple_Bootstrap/i) {
-                 	$h{pt_type} = 0x401;
-                 	$h{isBoot} = 1;
-                 	if (defined $bootstrap_part) {
-                 		#found a bootstrap already - use it, but log the find
-                 		log::l("found another apple bootstrap at partition /dev/$hd->{device}" . ($i+1));
-                 	} else {
-                 		$bootstrap_part = "/dev/" . $hd->{device} . ($i+1);
-                 		log::l("found apple bootstrap at partition $bootstrap_part");
-                 	}
-                } else {
-                 	$h{pt_type} = 0x401;
-                     $h{isDriver} = 1;
-                }
-
-                # Let's see if this partition is a driver.
-                foreach (@{$info{ddMap}}) {
-                    $_->{ddBlock} == $h{pPBlockStart} and $h{isDriver} = 1;
-                }
-
-            }
-            \%h;
-        } [ $part ];
-    }
-
-    [ @pt ], \%info;
-}
-
-sub write($$$;$) {
-    my ($hd, $sector, $pt, $info) = @_;
-
-    #- handle testing for writing partition table on file only!
-    my $F;
-    if ($::testing) {
-	my $file = "/tmp/partition_table_$hd->{device}";
-	open $F, ">$file" or die "error opening test file $file";
-    } else {
-	$F = partition_table::raw::openit($hd, 2) or die "error opening device $hd->{device} for writing";
-        c::lseek_sector(fileno($F), $sector, 0) or return 0;
-    }
-
-    # Find the partition map.
-    my @partstowrite;
-    my $part = $pt->[0];
-    defined $part->{isMap} or die "the first partition is not the partition map";
-    push @partstowrite, $part;
-
-    # Now go thru the partitions, sort and fill gaps.
-    my $last;
-    while ($part) {
-        $last = $part;
-        $part = &partition_table::next($hd, $part);
-        $part or last;
-
-        if ($last->{start} + $last->{size} < $part->{start}) {
-            #There is a gap between partitions.  Fill it and move on.
-            push @partstowrite, {
-                pt_type => 0x0,
-                start => $last->{start} + $last->{size},
-                size => $part->{start} - ($last->{start} + $last->{size}),
-            };
-        }
-        push @partstowrite, $part;
-    }
-
-    # now, fill a gap at the end if there is one.
-    if ($last->{start} + $last->{size} < $hd->{totalsectors}) {
-        push @partstowrite, {
-            pt_type => 0x0,
-            start => $last->{start} + $last->{size},
-            size => $hd->{totalsectors} - ($last->{start} + $last->{size}),
-     	};
-    }
-
-    # Since we did not create any new drivers, let's try and match up our driver records with out partitons and see if any are missing.
-    $info->{bzDrvrCnt} = 0;
-    my @ddstowrite;
-    foreach my $dd (@{$info->{ddMap}}) {
-        foreach (@partstowrite) {
-            if ($dd->{ddBlock} == $_->{pPBlockStart}) {
-            	push @ddstowrite, $dd;
-            	$info->{bzDrvrCnt}++;
-            	last;
-            }
-        }
-    }
-
-    # Now let's write our first block.
-    syswrite $F, pack($bz_format, @$info{@$bz_fields}), psizeof($bz_format) or return 0;
-
-    # ...and now the driver information.
-    foreach (@ddstowrite) {
-        syswrite $F, pack($dd_format, @$_{@$dd_fields}), psizeof($dd_format) or return 0;
-    }
-    # zero the rest of the data in the first block.
-    foreach (1 .. (494 - ((@ddstowrite) * 8))) {
-     	syswrite $F, "\0", 1 or return 0;
-    }
-    #c::lseek_sector(fileno($F), $sector, 512) or return 0;
-    # Now, we iterate thru the partstowrite and write them.
-    foreach (@partstowrite) {
-        if (!defined $_->{pSig}) {
-            # The values we need to write to disk are not defined.  Let's make them up.
-            $_->{pSig} = $pmagic;
-            $_->{pSigPad} = 0;
-            $_->{pPBlockStart} = ($_->{start} * 512) / $info->{bzBlkSize};
-            $_->{pPBlocks} = ($_->{size} * 512) / $info->{bzBlkSize};
-            $_->{pLBlockStart} = 0;
-            $_->{pLBlocks} = $_->{pPBlocks};
-            $_->{pBootBlock} = 0;
-            $_->{pBootBytes} = 0;
-            $_->{pAddrs1} = 0;
-            $_->{pAddrs2} = 0;
-            $_->{pAddrs3} = 0;
-            $_->{pAddrs4} = 0;
-            $_->{pChecksum} = 0;
-            $_->{pProcID} = "\0";
-            $_->{pBootArgs} = "\0";
-            $_->{pReserved} = "\0";
-
-            if ($_->{pt_type} == 0x402) {
-                $_->{pType} = "Apple_HFS";
-                $_->{pName} = "MacOS";
-                $_->{pFlags} = 0x4000037F;
-            } elsif ($_->{pt_type} == 0x401 && $_->{start} == 1) {
-                $_->{pType} = "Apple_Partition_Map";
-                $_->{pName} = "Apple";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{pt_type} == 0x401) {
-                $_->{pType} = "Apple_Bootstrap";
-                $_->{pName} = "bootstrap";
-                $_->{pFlags} = 0x33;
-		$_->{isBoot} = 1;
-		log::l("writing a bootstrap at /dev/$_->{device}");
-		$install_steps_interactive::new_bootstrap = 1 if !(defined $partition_table::mac::bootstrap_part);
-		$bootstrap_part = "/dev/" . $_->{device};
-            } elsif (isSwap($_)) {
-                $_->{pType} = "Apple_UNIX_SVR2";
-                $_->{pName} = "swap";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{fs_type} eq 'ext2') {
-                $_->{pType} = "Apple_UNIX_SVR2";
-                $_->{pName} = "Linux Native";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{fs_type} eq 'reiserfs') {
-                $_->{pType} = "Apple_UNIX_SVR2";
-                $_->{pName} = "Linux ReiserFS";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{fs_type} eq 'xfs') {
-                $_->{pType} = "Apple_UNIX_SVR2";
-                $_->{pName} = "Linux XFS";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{fs_type} eq 'jfs') {
-                $_->{pType} = "Apple_UNIX_SVR2";
-                $_->{pName} = "Linux JFS";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{fs_type} eq 'ext3') {
-                $_->{pType} = "Apple_UNIX_SVR2";
-                $_->{pName} = "Linux ext3";
-                $_->{pFlags} = 0x33;
-            } elsif ($_->{pt_type} == 0x0) {
-                $_->{pType} = "Apple_Free";
-                $_->{pName} = "Extra";
-                $_->{pFlags} = 0x31;
-            }
-        }
-        $_->{pMapEntry} = @partstowrite;
-        syswrite $F, pack($p_format, @$_{@$p_fields}), psizeof($p_format) or return 0;
-    }
-
-    common::sync();
-
-    1;
-}
-
-sub info {
-    my ($hd) = @_;
-
-    # - Build the first block of the drive.
-
-    my $info = {
-	bzSig => $magic,
-	bzBlkSize => 512,
-	bzBlkCnt => $hd->{totalsectors},
-	bzDevType => 0,
-	bzDevID => 0,
-	bzReserved => 0,
-	bzDrvrCnt => 0,
-    };
-
-    $info;
-}
-
-sub clear_raw {
-    my ($hd) = @_;
-    my @oldraw = @{$hd->{primary}{raw}};
-    my $pt = { raw => [ ({}) x 63 ], info => info($hd) };
-
-    #- handle special case for partition 1 which is the partition map.
-    $pt->{raw}[0] = {
-        pt_type => 0x401,
-        start => 1,
-        size => 63,
-        isMap => 1,
-    };
-#	$pt->{raw}[1] = {
-#		pt_type => 0x0,
-#		start => 64,
-#		size => $hd->{totalsectors} - 64,
-#		isMap => 0,
-#	};
-    push @{$pt->{normal}}, $pt->{raw}[0];
-#	push @{$pt->{normal}}, $pt->{raw}[1];
-
-    #- Recover any Apple Drivers, if any.
-    my $i = 1;
-    foreach (@oldraw) {
-        if (defined $_->{isDriver}) {
-            $pt->{raw}[$i] = $_;
-            push @{$pt->{normal}}, $pt->{raw}[$i];
-            $i++;
-        }
-    }
-    @{$pt->{info}{ddMap}} = @{$hd->{primary}{info}{ddMap}};
-
-    $pt;
-}
-
-1;
diff --git a/perl-install/partition_table/raw.pm b/perl-install/partition_table/raw.pm
deleted file mode 100644
index c290258f5..000000000
--- a/perl-install/partition_table/raw.pm
+++ /dev/null
@@ -1,254 +0,0 @@
-package partition_table::raw; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use devices;
-use detect_devices;
-use log;
-use c;
-
-my @MBR_signatures = (
-if_(arch() =~ /ppc/,
-    (map { [ 'yaboot', 0, "PM", 0x200 * $_ + 0x10, "bootstrap\0" ] } 0 .. 61), #- "PM" is a Partition Map
-    [ 'yaboot', 0x400, "BD", 0x424, "\011bootstrap" ], #- "BD" is a HFS filesystem
-),
-    [ 'empty', 0, "\0\0\0\0" ],
-    [ 'grub', 0, "\xEBG", 0x17d, "stage1 \0" ],
-    [ 'grub', 0, "\xEBH", 0x17e, "stage1 \0" ],
-    [ 'grub', 0, "\xEBH", 0x18a, "stage1 \0" ],
-    [ 'grub', 0, "\xEBH", 0x181, "GRUB \0" ],
-    [ 'lilo', 0x2,  "LILO" ],
-    [ 'lilo', 0x6,  "LILO" ],
-    [ 'lilo', 0x6 + 0x40,  "LILO" ], #- when relocated in lilo's bsect_update(), variable "space" on paragraph boundary gives 0x40
-    [ 'grub', 0x6,  "GRUB" ],
-    [ 'osbs', 0x2,  "OSBS" ], #- http://www.prz.tu-berlin.de/~wolf/os-bs.html
-    [ 'pqmagic', 0xef, "PQV" ],
-    [ 'BootStar', 0x130, "BootStar:" ],
-    [ 'DocsBoot', 0x148, 'DocsBoot' ],
-    [ 'system_commander', 0x1ad, "SYSCMNDRSYS" ],
-    [ 'Be Os', 0x24, 'Boot Manager' ],
-    [ 'os2', 0, "\xFA\xB8\x30\x00", 0xfA, "OS/2" ],
-    [ 'TimO', 0, 'IBM Thinkpad hibernation partition' ],
-    [ 'dos', 0xa0, "\x25\x03\x4E\x02\xCD\x13" ],
-    [ 'dos', 0xa0, "\x00\xB4\x08\xCD\x13\x72" ], #- nt2k's
-    [ 'dos', 0x60, "\xBB\x00\x7C\xB8\x01\x02\x57\xCD\x13\x5F\x73\x0C\x33\xC0\xCD\x13" ], #- nt's
-    [ 'dos', 0x70, "\x0C\x33\xC0\xCD\x13\x4F\x75\xED\xBE\xA3" ],
-    [ 'freebsd', 0xC0, "\x00\x30\xE4\xCD\x16\xCD\x19\xBB\x07\x00\xB4" ],
-    [ 'freebsd', 0x160, "\x6A\x10\x89\xE6\x48\x80\xCC\x40\xCD\x13" ],
-    [ 'dummy', 0xAC, "\x0E\xB3\x07\x56\xCD\x10\x5E\xEB" ], #- caldera?
-    [ 'ranish', 0x100, "\x6A\x10\xB4\x42\x8B\xF4\xCD\x13\x8B\xE5\x73" ],
-    [ 'os2', 0x1c2, "\x0A" ],
-    [ 'Acronis', 0, "\xE8\x12\x01" ],
-);
-
-sub typeOfMBR($) { typeFromMagic(devices::make($_[0]), @MBR_signatures) }
-sub typeOfMBR_($) { typeFromMagic($_[0], @MBR_signatures) }
-
-sub hasExtended { 0 }
-sub set_best_geometry_for_the_partition_table {}
-
-sub cylinder_size($) {
-    my ($hd) = @_;
-    $hd->{geom}{sectors} * $hd->{geom}{heads};
-}
-sub first_usable_sector { 1 }
-sub last_usable_sector { 
-    my ($hd) = @_;
-    $hd->{totalsectors};
-}
-
-#- default method for starting a partition, only head size or twice
-#- is allowed for starting a partition after a cylinder boundarie.
-sub adjustStart($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-
-    $part->{start} = round_up($part->{start},
-			      $part->{start} % cylinder_size($hd) < 2 * $hd->{geom}{sectors} ?
-   			      $hd->{geom}{sectors} : cylinder_size($hd));
-    $part->{size} = $end - $part->{start};
-    $part->{size} > 0 or die "adjustStart get a too small partition to handle correctly";
-}
-#- adjusting end to match a cylinder boundary, two methods are used and must
-#- match at the end, else something is wrong and nothing will be done on
-#- partition table.
-#- $end2 is computed by removing 2 (or only 1 if only 2 heads on drive) groups
-#- of sectors, this is necessary to handle extended partition where logical
-#- partition start after 1 (or 2 accepted) groups of sectors (typically 63).
-#- $end is floating (is not on cylinder boudary) so we have to choice a good
-#- candidate, $end1 or $end2 should always be good except $end1 for small
-#- partition size.
-sub adjustEnd($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-    $end > $hd->{geom}{cylinders} * cylinder_size($hd) && $end <= $hd->{totalsectors} and return;
-    my $end1 = round_down($end, cylinder_size($hd));
-    my $end2 = round_up($end - ($hd->{geom}{heads} > 2 ? 2 : 1) * $hd->{geom}{sectors}, cylinder_size($hd));
-    $end2 <= $hd->{geom}{cylinders} * cylinder_size($hd) or die "adjustEnd go beyond end of device geometry ($end2 > $hd->{totalsectors})";
-    $part->{size} = ($end1 - $part->{start} > cylinder_size($hd) ? $end1 : $end2) - $part->{start};
-    $part->{size} > 0 or internal_error("adjustEnd get a too small partition to handle correctly");
-}
-
-sub compute_nb_cylinders {
-    my ($geom, $totalsectors) = @_;
-    $geom->{cylinders} = int $totalsectors / $geom->{heads} / $geom->{sectors};
-}
-
-sub keep_non_duplicates {
-    my %l;
-    $l{$_->[0]}++ foreach @_;
-    map { @$_ } grep { $l{$_->[0]} == 1 } @_;
-}
-
-sub get_geometries {
-    my (@hds) = @_;
-
-    @hds = grep {
-	if (my $h = get_geometry($_->{file})) {
-	    add2hash_($_, $h);
-	    1;
-	} else {
-	    log::l("An error occurred while getting the geometry of block device $_->{file}: $!");
-	    0;
-	}
-    } @hds;
-
-    my %id2hd = keep_non_duplicates(map {
-	my $F = openit($_) or log::l("failed to open device $_->{device}");
-	my $tmp;
-	if ($F && c::lseek_sector(fileno($F), 0, 0x1b8) && sysread($F, $tmp, 4)) {
-	    [ sprintf('0x%08x', unpack('V', $tmp)), $_ ];
-	} else {
-	    ();
-	}
-    } @hds);
-
-
-    my %id2edd = keep_non_duplicates(map { [ chomp_(cat_("$_/mbr_signature")), $_ ] } glob("/sys/firmware/edd/int13_dev*"));
-
-    log::l("id2hd: " . join(' ', map_each { "$::a=>$::b->{device}" } %id2hd));
-    log::l("id2edd: " . join(' ', map_each { "$::a=>$::b" } %id2edd));
-
-    foreach my $id (keys %id2hd) {
-	my $hd = $id2hd{$id};
-	$hd->{volume_id} = $id;
-
-	if (my $edd_dir = $id2edd{$id}) {
-	    $hd->{bios_from_edd} = $1 if $edd_dir =~ /int13_dev(.*)/;
-
-	    require partition_table::dos;
-	    my $geom = partition_table::dos::geometry_from_edd($hd, $edd_dir);
-	    $hd->{geom} = $geom if $geom;
-	}
-    }
-
-    @hds;
-}
-
-sub get_geometry {
-    my ($dev) = @_;
-    my $g = "";
-
-    sysopen(my $F, $dev, 0) or return;
-    ioctl($F, c::HDIO_GETGEO(), $g) or return;
-    my %geom; @geom{qw(heads sectors cylinders start)} = unpack "CCSL", $g;
-    $geom{totalcylinders} = $geom{cylinders};
-
-    my $total;
-    #- $geom{cylinders} is no good (only a ushort, that means less than 2^16 => at best 512MB)
-    if ($total = c::total_sectors(fileno $F)) {
-	compute_nb_cylinders(\%geom, $total);
-    } else {
-	$total = $geom{heads} * $geom{sectors} * $geom{cylinders};
-    }
-
-    { geom => \%geom, totalsectors => $total };
-}
-
-sub openit { 
-    my ($hd, $o_mode) = @_;
-    my $F; sysopen($F, $hd->{file}, $o_mode || 0) && $F;
-}
-
-sub raw_removed {
-    my ($_hd, $_raw) = @_;
-}
-sub can_raw_add {
-    my ($hd) = @_;
-    $_->{size} || $_->{pt_type} or return 1 foreach @{$hd->{primary}{raw}};
-    0;
-}
-sub raw_add {
-    my ($_hd, $raw, $part) = @_;
-
-    foreach (@$raw) {
-	$_->{size} || $_->{pt_type} and next;
-	$_ = $part;
-	return;
-    }
-    die "raw_add: partition table already full";
-}
-
-sub default_type {
-    my $type = arch() =~ /ia64/ ? 'gpt' : arch() eq "alpha" ? "bsd" : arch() =~ /^sparc/ ? "sun" : arch() eq "ppc" ? "mac" : "dos";
-    #- override standard mac type on PPC for IBM machines to dos
-    $type = "dos" if arch() =~ /ppc/ && detect_devices::get_mac_model() =~ /^IBM/;
-    require "partition_table/$type.pm";
-    "partition_table::$type";
-}
-
-sub zero_MBR {
-    my ($hd) = @_;
-    #- force the standard partition type for the architecture
-    bless $hd, default_type();
-    $hd->{primary} = $hd->clear_raw;
-    delete $hd->{extended};
-    if (is_xbox()) {
-        my $part = { start => 1, size => 15632048, pt_type => 0x0bf, isFormatted => 1 };
-        partition_table::dos::compute_CHS($hd, $part);
-	$hd->{primary}{raw}[0] = $part;
-    }
-}
-
-sub zero_MBR_and_dirty {
-    my ($hd) = @_;    
-    my @parts = (partition_table::get_normal_parts($hd), if_($hd->{primary}{extended}, $hd->{primary}{extended}));
-    partition_table::will_tell_kernel($hd, del => $_) foreach @parts;
-    zero_MBR($hd);
-}
-
-#- ugly stuff needed mainly for Western Digital IDE drives
-#- try writing what we've just read, yells if it fails
-#- testing on last sector of head #0 (unused in 99% cases)
-#-
-#- return false if the device can not be written to (especially for Smartmedia)
-sub test_for_bad_drives {
-    my ($hd) = @_;
-
-    log::l("test_for_bad_drives($hd->{file})");
-    my $sector = $hd->{geom}{sectors} - 1;
-    
-    sub error { die "$_[0] error: $_[1]" }
-
-    my $F = openit($hd, $::testing ? 0 : 2) or error(openit($hd) ? 'write' : 'read', "can not open device");
-
-    my $seek = sub {
-	c::lseek_sector(fileno($F), $sector, 0) or error('read', "seeking to sector $sector failed");
-    };
-    my $tmp;
-
-    &$seek; sysread $F, $tmp, $SECTORSIZE or error('read', "can not even read ($!)");
-    return if $hd->{readonly} || $::testing;
-    &$seek; syswrite $F, $tmp or error('write', "can not even write ($!)");
-
-    my $tmp2;
-    &$seek; sysread $F, $tmp2, $SECTORSIZE or die "test_for_bad_drives: can not even read again ($!)";
-    $tmp eq $tmp2 or die
-N("Something bad is happening on your drive. 
-A test to check the integrity of data has failed. 
-It means writing anything on the disk will end up with random, corrupted data.");
-}
-
-1;
diff --git a/perl-install/partition_table/sun.pm b/perl-install/partition_table/sun.pm
deleted file mode 100644
index 54e734ca8..000000000
--- a/perl-install/partition_table/sun.pm
+++ /dev/null
@@ -1,202 +0,0 @@
-package partition_table::sun; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(@ISA);
-
-@ISA = qw(partition_table::raw);
-
-use common;
-use partition_table::raw;
-use partition_table;
-use fs::type;
-use c;
-
-my ($main_format, $main_fields) = list2kv(
-  a128  => 'info',
-  a14   => 'spare0',
-  a32   => 'infos',
-  a246  => 'spare1',
-  n     => 'rspeed',
-  n     => 'pcylcount',
-  n     => 'sparecyl',
-  a4    => 'spare2',
-  n     => 'ilfact',
-  n     => 'ncyl',
-  n     => 'nacyl',
-  n     => 'ntrks',
-  n     => 'nsect',
-  a4    => 'spare3',
-  a64   => 'partitions',
-  n     => 'magic',
-  n     => 'csum',
-);
-$main_format = join '', @$main_format;
-
-my ($fields1, $fields2) = ([ qw(pt_type flags) ], [ qw(start_cylinder size) ]);
-my ($format1, $format2) = ("xCxC", "N2");
-my $magic = 0xDABE;
-my $nb_primary = 8;
-my $offset = 0;
-
-sub adjustStart($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-
-    #- since partition must always start on cylinders boundaries on sparc,
-    #- note that if start sector is on the first cylinder, it is adjusted
-    #- to 0 and it is valid, cylinder 0 bug is from bad define for sparc
-    #- compilation of mke2fs combined with a blind kernel...
-    $part->{start} = round_down($part->{start}, $hd->cylinder_size);
-    $part->{size} = $end - $part->{start};
-    $part->{size} = $hd->cylinder_size if $part->{size} <= 0;
-}
-sub adjustEnd($$) {
-    my ($hd, $part) = @_;
-    my $end = $part->{start} + $part->{size};
-    my $end2 = round_up($end, $hd->cylinder_size);
-    $end2 = $hd->{geom}{cylinders} * $hd->cylinder_size if $end2 > $hd->{geom}{cylinders} * $hd->cylinder_size;
-    $part->{size} = $end2 - $part->{start};
-}
-
-#- compute crc checksum used for Sun Label partition, expect
-#- $tmp to be the 512 bytes buffer to be read/written to MBR.
-sub compute_crc($) {
-    my ($tmp) = @_;
-    my @l2b = unpack "n256", $tmp;
-    my $crc = 0;
-
-    $crc ^= $_ foreach @l2b;
-
-    $crc;
-}
-
-sub read($$) {
-    my ($hd, $sector) = @_;
-    my $tmp;
-
-    my $F = partition_table::raw::openit($hd) or die "failed to open device";
-    c::lseek_sector(fileno($F), $sector, $offset) or die "reading of partition in sector $sector failed";
-
-    sysread $F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
-    my %info; @info{@$main_fields} = unpack $main_format, $tmp;
-
-    #- check magic number
-    $info{magic}  == $magic or die "bad magic number on disk $hd->{device}";
-
-    #- check crc, csum contains the crc so result should be 0.
-    compute_crc($tmp) == 0 or die "bad checksum";
-
-    @{$hd->{geom}}{qw(cylinders heads sectors)} = @info{qw(ncyl ntrks nsect)};
-
-    my @pt;
-    my @infos_up = unpack $format1 x $nb_primary, $info{infos};
-    my @partitions_up = unpack $format2 x $nb_primary, $info{partitions};
-    foreach (0..$nb_primary-1) {
-	my $h = { flag => $infos_up[1 + 2 * $_],
-		  start_cylinder => $partitions_up[2 * $_], size => $partitions_up[1 + 2 * $_] };
-	fs::type::set_pt_type($h, $infos_up[2 * $_]);
-	$h->{start} = $sector + $h->{start_cylinder} * $hd->cylinder_size;
-	$h->{pt_type} && $h->{size} or $h->{$_} = 0 foreach keys %$h;
-	push @pt, $h;
-    }
-
-#- this code is completely broken by null char inside strings, it gets completely crazy :-)
-#    my @pt = mapn {
-#	my %h; 
-#	@h{@$fields1} = unpack $format1, $_[0];
-#	@h{@$fields2} = unpack $format2, $_[1];
-#	$h{start} = $sector + $h{start_cylinder} * $hd->cylinder_size();
-#	$h{pt_type} && $h{size} or $h{$_} = 0 foreach keys %h;
-#	\%h;
-#    } [ grep { $_ } split /(.{$size1})/o, $info{infos} ], [ grep { $_ } split /(.{$size2})/o, $info{partitions} ];
-
-    [ @pt ], \%info;
-}
-
-# write the partition table (and extended ones)
-# for each entry, it uses fields: start, size, pt_type, active
-sub write($$$;$) {
-    my ($hd, $sector, $pt, $info) = @_;
-#    my ($csize, $wdsize) = (0, 0);
-
-    #- handle testing for writing partition table on file only!
-    my $F;
-    if ($::testing) {
-	my $file = "/tmp/partition_table_$hd->{device}";
-	open $F, ">$file" or die "error opening test file $file";
-    } else {
-	$F = partition_table::raw::openit($hd, 2) or die "error opening device $hd->{device} for writing";
-        c::lseek_sector(fileno($F), $sector, $offset) or return 0;
-    }
-
-    ($info->{infos}, $info->{partitions}) = map { join '', @$_ } list2kv map {
-	$_->{start} % $hd->cylinder_size == 0 or die "partition not at beginning of cylinder";
-#	$csize += $_->{size} if $_->{pt_type} != 5;
-#	$wdsize += $_->{size} if $_->{pt_type} == 5;
-	$_->{flags} |= 0x10 if $_->{mntpoint} eq '/';
-	$_->{flags} |= 0x01 if !isSwap($_);
-	local $_->{start_cylinder} = $_->{start} / $hd->cylinder_size - $sector;
-	pack($format1, @$_{@$fields1}), pack($format2, @$_{@$fields2});
-    } @$pt;
-#    $csize == $wdsize or die "partitions are not using whole disk space";
-
-    #- compute the checksum by building the buffer to write and call compute_crc.
-    #- set csum to 0 so compute_crc will give the right csum value.
-    $info->{csum} = 0;
-    $info->{csum} = compute_crc(pack($main_format, @$info{@$main_fields}));
-
-    syswrite $F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
-
-    common::sync();
-
-    1;
-}
-
-sub info {
-    my ($hd) = @_;
-
-    #- take care of reduction of the number of cylinders, avoid loop of reduction!
-    unless ($hd->{geom}{totalcylinders} > $hd->{geom}{cylinders}) {
-	$hd->{geom}{totalcylinders} = $hd->{geom}{cylinders};
-	$hd->{geom}{cylinders} -= 2;
-
-	#- rebuild some constants according to number of cylinders.
-	$hd->{totalsectors} = $hd->{geom}{heads} * $hd->{geom}{sectors} * $hd->{geom}{cylinders};
-    }
-
-    #- build a default suitable partition table,
-    #- checksum will be built when writing on disk.
-    #- note third partition is ALWAYS of type Whole disk.
-    my $info = {
-	info => "DiskDrake partition table",
-	rspeed => 5400,
-	pcylcount => $hd->{geom}{totalcylinders},
-	sparecyl => 0,
-	ilfact => 1,
-	ncyl => $hd->{geom}{cylinders},
-	nacyl => $hd->{geom}{totalcylinders} - $hd->{geom}{cylinders},
-	ntrks => $hd->{geom}{heads},
-	nsect => $hd->{geom}{sectors},
-	magic => $magic,
-    };
-
-    $info;
-}
-
-sub clear_raw {
-    my ($hd) = @_;
-    my $pt = { raw => [ ({}) x $nb_primary ], info => info($hd) };
-
-    #- handle special case for partition 2 which is whole disk.
-    $pt->{raw}[2] = {
-	pt_type => 5, #- the whole disk type.
-	flags => 0,
-	start_cylinder => 0,
-	size => $hd->{geom}{cylinders} * $hd->cylinder_size,
-    };
-
-    $pt;
-}
-
-1;
diff --git a/perl-install/patch/9.1/hp.diff b/perl-install/patch/9.1/hp.diff
deleted file mode 100644
index befdf71f6..000000000
--- a/perl-install/patch/9.1/hp.diff
+++ /dev/null
@@ -1,137 +0,0 @@
-Index: install_steps_interactive.pm
-===================================================================
-RCS file: /cooker/gi/perl-install/install_steps_interactive.pm,v
-retrieving revision 1.810
-retrieving revision 1.812
-diff -u -p -r1.810 -r1.812
---- install_steps_interactive.pm	12 Mar 2003 15:34:46 -0000	1.810
-+++ install_steps_interactive.pm	20 Mar 2003 10:12:38 -0000	1.812
-@@ -1006,6 +1006,9 @@ sub summary {
- 	    local $::expert = $::expert;
- 	    require network::netconnect;
- 	    network::netconnect::main($o->{prefix}, $o->{netcnx} ||= {}, $o->{netc}, $o->{mouse}, $o, $o->{intf}, 0, 0, 1);
-+	    #- in case netcnx type is not updated.
-+	    require network::network;
-+	    network::network::probe_netcnx_type($o->{prefix}, $o->{netc}, $o->{intf}, $o->{netcnx});
- 	},
-     b
-     };
- 
-Index: lang.pm
-===================================================================
-RCS file: /cooker/gi/perl-install/lang.pm,v
-retrieving revision 1.309
-retrieving revision 1.312
-diff -u -p -r1.309 -r1.312
---- lang.pm	11 Mar 2003 23:35:36 -0000	1.309
-+++ lang.pm	19 Mar 2003 17:06:18 -0000	1.312
-@@ -229,7 +229,7 @@ my %countries = (
- 'GU' => [ N_("Guam"),           'en_US', '4' ], #
- 'GW' => [ N_("Guinea-Bissau"),  'pt_PT', '3' ], #
- 'GY' => [ N_("Guyana"),         'en_US', '5' ], #
--'HK' => [ N_("Hong Kong"),      'zh_HK', '2' ],
-+'HK' => [ N_("China") . ' (' . N_("Hong Kong") . ')',      'zh_HK', '2' ],
- 'HM' => [ N_("Heard and McDonald Islands"), 'en_US', '4' ], #
- 'HN' => [ N_("Honduras"),       'es_HN', '5' ],
- 'HR' => [ N_("Croatia"),        'hr_HR', '1' ],
-@@ -742,6 +742,9 @@ sub l2pango_font {
- 
- sub set {
-     my ($lang, $translate_for_console) = @_;
-+
-+    #- disable Arabic in install as no (free) fonts are available.
-+    $lang eq 'ar' and $lang='en_US';
- 
-     exists $langs{$lang} or log::l("lang::set: trying to set to $lang but I don't know it!"), return;
- 
-Index: standalone/service_harddrake
-===================================================================
-RCS file: /cooker/gi/perl-install/standalone/service_harddrake,v
-retrieving revision 1.34
-diff -u -p -r1.34 service_harddrake
---- standalone/service_harddrake	12 Mar 2003 10:55:35 -0000	1.34
-+++ standalone/service_harddrake	21 Mar 2003 16:06:52 -0000
-@@ -13,7 +13,7 @@ use modules;
- use Storable qw(store retrieve);
- 
- my $invert_do_it = $ARGV[0] eq 'X11' ? 1 : 0;
--my ($hw_sysconfdir, $timeout) = ("/etc/sysconfig/harddrake2", $invert_do_it ? 600 : 5);
-+my ($hw_sysconfdir, $timeout) = ("/etc/sysconfig/harddrake2", $invert_do_it ? 600 : 25);
- my $last_boot_config = $hw_sysconfdir."/previous_hw";
- 
- $last_boot_config .= '_X11' if $invert_do_it;
-Index: drakxtools.spec
-===================================================================
-RCS file: /cooker/gi/perl-install/drakxtools.spec,v
-retrieving revision 1.247
-diff -u -p -r1.247 drakxtools.spec
---- drakxtools.spec	16 Mar 2003 15:30:56 -0000	1.247
-+++ drakxtools.spec	21 Mar 2003 16:17:22 -0000
-@@ -1,7 +1,7 @@
- Summary: The drakxtools (XFdrake, diskdrake, keyboarddrake, mousedrake...)
- Name:    drakxtools
- Version: 9.1
--Release: 26mdk
-+Release: 27mdk
- Url: http://www.mandrakelinux.com/en/drakx.php2
- Source0: %name-%version.tar.bz2
- License: GPL
-@@ -303,6 +303,9 @@ file /etc/sysconfig/harddrake2/previous_
- %config(noreplace) %_sysconfdir/logrotate.d/drakxtools-http
- 
- %changelog
-+* Fri Mar 21 2003 Thierry Vignaud <tvignaud@mandrakesoft.com> 9.1-27mdk
-+- harddrake service: increase default timeout from 5 to 25 seconds
-+
- * Sun Mar 16 2003 Warly <warly@mandrakesoft.com> 9.1-25mdk
- - do a correct cvs up of all gi before (me sux)
- 
-Index: install_steps_interactive.pm
-===================================================================
-RCS file: /cooker/gi/perl-install/install_steps_interactive.pm,v
-retrieving revision 1.810
-diff -u -p -r1.810 install_steps_interactive.pm
---- install_steps_interactive.pm	12 Mar 2003 15:34:46 -0000	1.810
-+++ install_steps_interactive.pm	21 Mar 2003 16:11:09 -0000
-@@ -894,7 +894,7 @@ sub summary {
-     my $timezone_manually_set;  
-     push @l, {
- 	group => N("System"),
--	label => N("Country"),
-+	label => N("Country") . N(" / Region"),
- 	val => sub { lang::c2name($o->{locale}{country}) },
- 	clicked => sub {
- 	    any::selectCountry($o, $o->{locale}) or return;
-Index: any.pm
-===================================================================
-RCS file: /cooker/gi/perl-install/any.pm,v
-retrieving revision 1.340
-diff -u -p -r1.340 any.pm
---- any.pm	13 Mar 2003 10:42:51 -0000	1.340
-+++ any.pm	21 Mar 2003 16:11:09 -0000
-@@ -688,7 +688,7 @@ sub selectCountry {
-     my ($other, $ext_country);
-     member($country, @best) or ($ext_country, $country) = ($country, $ext_country);
-     $o->ask_from_(
--		  { title => N("Country"), 
-+		  { title => N("Country") . N(" / Region"), 
- 		    messages => N("Please choose your country."),
- 		    interactive_help_id => 'selectCountry',
- 		    advanced_messages => N("Here is the full list of available countries"),
-Index: lang.pm
-===================================================================
-RCS file: /cooker/gi/perl-install/lang.pm,v
-retrieving revision 1.312
-diff -u -r1.312 lang.pm
---- lang.pm     19 Mar 2003 17:06:18 -0000      1.312
-+++ lang.pm     28 Mar 2003 15:24:41 -0000
-@@ -23,7 +23,8 @@
- my %langs = (
- 'af' =>    [ 'Afrikaans',           'Afrikaans',         'af_ZA', '  3  ', 'iso-8859-1' ],
- 'am' =>    [ 'Amharic',             'ZZ emarNa',         'am_ET', '  3  ', 'utf_am' ],
--'ar' =>    [ 'Arabic',              'AA Arabic',         'ar_EG', ' 23  ', 'utf_ar' ],
-+#- doesn't work well after install
-+#'ar' =>    [ 'Arabic',              'AA Arabic',         'ar_EG', ' 23  ', 'utf_ar' ],
- 'az' =>    [ 'Azeri (Latin)',       'Azerbaycanca',      'az_AZ', ' 2   ', 'utf_az' ],
- 'be' =>    [ 'Belarussian',         'Belaruskaya',       'be_BY', '1    ', 'cp1251' ],
- 'bg' =>    [ 'Bulgarian',           'Blgarski',          'bg_BG', '1    ', 'cp1251' ],
diff --git a/perl-install/patch/9.1/patch-detectSMP-K6.pl b/perl-install/patch/9.1/patch-detectSMP-K6.pl
deleted file mode 100644
index acf5821f6..000000000
--- a/perl-install/patch/9.1/patch-detectSMP-K6.pl
+++ /dev/null
@@ -1,5 +0,0 @@
-use detect_devices;
-package detect_devices;
-
-undef *hasSMP;
-*hasSMP = sub { 0 };
diff --git a/perl-install/patch/9.1/patch-loopback.pl b/perl-install/patch/9.1/patch-loopback.pl
deleted file mode 100644
index d0f4185b3..000000000
--- a/perl-install/patch/9.1/patch-loopback.pl
+++ /dev/null
@@ -1,18 +0,0 @@
-use bootloader;
-package bootloader;
-log::l("PATCHING: fixing 9.1 aes.o missing in initrd for / on loopback");
-
-*mkinitrd = sub {
-    my ($kernelVersion, $initrdImage) = @_;
-
-    my $loop_boot = loopback::prepare_boot();
-
-    modules::load('loop');
-    if (!run_program::rooted($::prefix, "mkinitrd", "--with=aes", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion)) {
-	unlink("$::prefix/$initrdImage");
-	die "mkinitrd failed";
-    }
-    loopback::save_boot($loop_boot);
-
-    -e "$::prefix/$initrdImage";
-};
diff --git a/perl-install/patch/patch-9.0-auto-inst-network-config.pl b/perl-install/patch/patch-9.0-auto-inst-network-config.pl
deleted file mode 100644
index f7cdc95ce..000000000
--- a/perl-install/patch/patch-9.0-auto-inst-network-config.pl
+++ /dev/null
@@ -1,8 +0,0 @@
-package install_steps;
-log::l("fixing network module probe & configuration in interactive auto_install");
-my $old_configureNetwork = \&configureNetwork;
-undef *configureNetwork;
-*configureNetwork = sub {
-    modules::load_category('network/main|usb');
-    &$old_configureNetwork;
-};
diff --git a/perl-install/patch/patch-IMPS2.pl b/perl-install/patch/patch-IMPS2.pl
deleted file mode 100644
index 488b6ac11..000000000
--- a/perl-install/patch/patch-IMPS2.pl
+++ /dev/null
@@ -1,9 +0,0 @@
-use install_gtk;
-package install_gtk;
-
-my $old_createXconf = \&createXconf;
-undef *createXconf;
-*createXconf = sub {
-    symlink 'mouse', '/dev/cdrom';
-    &$old_createXconf;
-}
diff --git a/perl-install/patch/patch-da.pl b/perl-install/patch/patch-da.pl
deleted file mode 100644
index 63a9f76d5..000000000
--- a/perl-install/patch/patch-da.pl
+++ /dev/null
@@ -1,6 +0,0 @@
-use common;
-
-log::l("PATCHING: installing mo");
-my $dir = '/usr/share/locale_special/da/LC_MESSAGES';
-mkdir_p($dir);
-system("gzip -dc /mnt/da_mo.gz > $dir/libDrakX.mo");
diff --git a/perl-install/patch/patch-nforce.pl b/perl-install/patch/patch-nforce.pl
deleted file mode 100644
index 35587ec75..000000000
--- a/perl-install/patch/patch-nforce.pl
+++ /dev/null
@@ -1,35 +0,0 @@
-use install_steps;
-use common;
-
-package install_steps;
-
-my $old_afterInstallPackages = \&afterInstallPackages;
-undef *afterInstallPackages;
-*afterInstallPackages = sub {
-    &$old_afterInstallPackages;
-
-    my ($o) = @_;
-
-    # workaround nforce stuff.
-    #
-    # modules.pm uses /lib/modules/VERSION/modules*map to know which
-    # sound drivers to use : this'll cause i810_audio to override
-    # nvaudio since it exports the nvforce audio pci ids
-    #
-    # the right solution is to :
-    #
-    # - remove the nforce ids from i810_audio until the oss driver got
-    #   fixes implemented in alsa driver for nforce (snd-intel8x0.o)
-    #
-    # - ask nvidia to declare which pci ids they use and export them
-    #   for depmod :
-    #   MODULE_DEVICE_TABLE (pci, <name_of_the struct pci_device_id variable>);
-
-    #- try to workaround nforce stuff.
-    foreach (keys %{$o->{packages}{provides}{kernel}}) {
-	my $p = $o->{packages}{depslist}[$_];
-	my ($ext, $version, $release) = $p->name =~ /^kernel-([^\d\-]*)-?([^\-]*)\.([^\-\.]*)$/ or next;
-	-s "$o->{prefix}/lib/modules/$version-$release$ext/kernel/drivers/sound/nvaudio.o.gz" and
-	  run_program::rooted($o->{prefix}, "cp -f /lib/modules/$version-$release$ext/kernel/drivers/sound/nvaudio.o.gz /lib/modules/$version-$release$ext/kernel/drivers/sound/i810_audio.o.gz");
-    }
-};
diff --git a/perl-install/patch/patch-oem-9.0.pl b/perl-install/patch/patch-oem-9.0.pl
deleted file mode 100644
index 60c7422fe..000000000
--- a/perl-install/patch/patch-oem-9.0.pl
+++ /dev/null
@@ -1,52 +0,0 @@
-use install_steps;
-package install_steps;
-
-my $old_afterInstallPackages = \&afterInstallPackages;
-undef *afterInstallPackages;
-*afterInstallPackages = sub {
-    &$old_afterInstallPackages;
-
-    my ($o) = @_;
-
-    #- update oem lilo image if it exists.
-    if (-s "$o->{prefix}/boot/oem-message-graphic") {
-	rename "$o->{prefix}/boot/message-graphic", "$o->{prefix}/boot/message-graphic.mdkgiorig";
-	rename "$o->{prefix}/boot/oem-message-graphic", "$o->{prefix}/boot/message-graphic";
-    }
-
-    #- update background image if it exists for common environment.
-    if (-s "$o->{prefix}/usr/share/mdk/oem-background.png") {
-	if (-e "$o->{prefix}/usr/share/mdk/backgrounds/default.png") {
-	    rename "$o->{prefix}/usr/share/mdk/backgrounds/default.png",
-	           "$o->{prefix}/usr/share/mdk/backgrounds/default.png.mdkgiorig";
-	    rename "$o->{prefix}/usr/share/mdk/oem-background.png", "$o->{prefix}/usr/share/mdk/backgrounds/default.png";
-	} else {
-	    #- KDE desktop background.
-	    if (-e "$o->{prefix}/usr/share/config/kdesktoprc") {
-		update_gnomekderc("$o->{prefix}/usr/share/config/kdesktoprc", "Desktop0",
-				  MultiWallpaperMode => "NoMulti",
-				  Wallpaper => "/usr/share/mdk/oem-background.png",
-				  WallpaperMode => "Scaled",
-				 );
-	    }
-	    #- GNOME desktop background.
-	    if (-e "$o->{prefix}/etc/gnome/config/Background") {
-		update_gnomekderc("$o->{prefix}/etc/gnome/config/Background", "Default",
-				  wallpaper => "/usr/share/mdk/oem-background.png",
-				  wallpaperAlign => "3",
-				 );
-	    }
-	}
-    }
-
-    #- try to workaround nforce stuff.
-    foreach (keys %{$o->{packages}{provides}{kernel}}) {
-	my $p = $o->{packages}{depslist}[$_];
-	my ($ext, $version, $release) = $p->name =~ /^kernel-([^\d\-]*)-?([^\-]*)\.([^\-\.]*)$/ or next;
-	-s "$o->{prefix}/lib/modules/$version-$release$ext/kernel/drivers/sound/nvaudio.o.gz" and
-	  run_program::rooted($o->{prefix}, "cp -f /lib/modules/$version-$release$ext/kernel/drivers/sound/nvaudio.o.gz /lib/modules/$version-$release$ext/kernel/drivers/sound/i810_audio.o.gz");
-    }
-
-    #- try to check if pcitable and others have been built correctly.
-    -e "$o->{prefix}/usr/share/ldetect-lst/pcitable" or run_program::rooted($o->{prefix}, "/usr/sbin/update-ldetect-lst");
-};
diff --git a/perl-install/patch/patch-oem-hp.pl b/perl-install/patch/patch-oem-hp.pl
deleted file mode 100644
index 0a5b0b51e..000000000
--- a/perl-install/patch/patch-oem-hp.pl
+++ /dev/null
@@ -1,323 +0,0 @@
-use modules;
-package modules;
-my $old_load_raw = \&load_raw;
-undef *load_raw;
-*load_raw = sub {
-    &$old_load_raw;
-
-    my @l = map { my ($i, @i) = @$_; [ $i, \@i ] } grep { $_->[0] !~ /ignore/ } @_;
-    foreach (@l) {
-	if ($_->[0] eq 'ehci-hcd') {
-	    add_alias('usb-interface1', $_->[0]);
-	}
-    }
-
-    if (get_alias("usb-interface") || get_alias("usb-interface1")) {
-	unless (-e "/proc/bus/usb/devices") {
-	    require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-	    #- ensure keyboard is working, the kernel must do the job the BIOS was doing
-	    sleep 4;
-	    load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	}
-    }
-};
-
-my $old_load = \&load;
-undef *load;
-*load = sub {
-    &$old_load;
-
-    #- hack to get back usb-interface (even if already loaded by stage1)
-    #- NOTE load_multi is not used for that so not overloaded to fix that too.
-    if ($_[0] =~ /usb-[uo]hci/ && !get_alias("usb-interface")) {
-	add_alias('usb-interface', $_[0]);
-    } elsif ($_[0] eq 'ehci-hcd' && !get_alias("usb-interface1")) {
-	add_alias('usb-interface1', $_[0]);
-    }
-
-    if (get_alias("usb-interface") || get_alias("usb-interface1")) {
-	unless (-e "/proc/bus/usb/devices") {
-	    require fs; fs::mount('/proc/bus/usb', '/proc/bus/usb', 'usbdevfs');
-	    #- ensure keyboard is working, the kernel must do the job the BIOS was doing
-	    sleep 4;
-	    load_multi("usbkbd", "keybdev") if detect_devices::usbKeyboards();
-	}
-    }
-};
-
-#- ensure it is loaded using this patch.
-$::noauto or modules::load_thiskind("usb"); 
-sleep 2;
-
-use install_steps;
-package install_steps;
-
-my $old_beforeInstallPackages = \&beforeInstallPackages;
-undef *beforeInstallPackages;
-*beforeInstallPackages = sub {
-    &$old_beforeInstallPackages;
-
-    my ($o) = @_;
-    mkdir "$o->{prefix}$_" foreach qw(/boot /usr /usr/share /usr/share/mdk);
-    install_any::getAndSaveFile("Mandrake/base/oem-message-graphic", "$o->{prefix}/boot/oem-message-graphic");
-    install_any::getAndSaveFile("Mandrake/base/oem-background.png", "$o->{prefix}/usr/share/mdk/oem-background.png");
-};
-
-my $old_afterInstallPackages = \&afterInstallPackages;
-undef *afterInstallPackages;
-*afterInstallPackages = sub {
-    &$old_afterInstallPackages;
-
-    my ($o) = @_;
-
-    #- lilo image.
-    rename "$o->{prefix}/boot/lilo-graphic/message", "$o->{prefix}/boot/lilo-graphic/message.orig";
-    system "chroot", $o->{prefix}, "cp", "-f", "/boot/oem-message-graphic", "/boot/lilo-graphic/message";
-
-    #- KDE desktop background.
-    if (-e "$o->{prefix}/usr/share/config/kdesktoprc") {
-	update_gnomekderc("$o->{prefix}/usr/share/config/kdesktoprc", "Desktop0",
-			  MultiWallpaperMode => "NoMulti",
-			  Wallpaper => "/usr/share/mdk/oem-background.png",
-			  WallpaperMode => "Scaled",
-			 );
-    }
-    #- GNOME desktop background.
-    if (-e "$o->{prefix}/etc/gnome/config/Background") {
-	update_gnomekderc("$o->{prefix}/etc/gnome/config/Background", "Default",
-			  wallpaper => "/usr/share/mdk/oem-background.png",
-			  wallpaperAlign => "3",
-			 );
-    }
-
-    #- make sure no error can be forwarded, test staroffice installed and OpenOffice.org,
-    #- remove the first if the second is installed.
-    eval {
-	if (!$o->{isUpgrade} && -e "$o->{prefix}/usr/lib/openoffice/program/soffice.bin" && grep { -e "$o->{prefix}/usr/lib/office60_$_/program/soffice.bin" } qw(de en es fr it)) {
-	    require run_program;
-	    log::l("removing OpenOffice.org as staroffice is installed");
-	    run_program::rooted($o->{prefix}, "rpm", "-e", "OpenOffice.org");
-	}
-    };
-};
-
-use install_any;
-package install_any;
-
-undef *copy_advertising;
-*copy_advertising = sub {
-    my ($o) = @_;
-
-    return if $::rootwidth < 800;
-
-    my $f;
-    my $source_dir = "Mandrake/share/advertising";
-    foreach ("." . $o->{lang}, "." . substr($o->{lang},0,2), '') {
-	$f = getFile("$source_dir$_/list") or next;
-	$source_dir = "$source_dir$_";
-    }
-    if (my @files = <$f>) {
-	my $dir = "$o->{prefix}/tmp/drakx-images";
-	mkdir $dir;
-	unlink glob_("$dir/*");
-	foreach (@files) {
-	    chomp;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.png/\.pl/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/\.pl/_icon\.png/;
-	    getAndSaveFile("$source_dir/$_", "$dir/$_");
-	    s/_icon\.png/\.png/;
-	}
-	@advertising_images = map { $_ && -e "$dir/$_" ? ("$dir/$_") : () } @files;
-    }
-};
-
-#undef *allowNVIDIA_rpms;
-#*allowNVIDIA_rpms = sub {
-#    my ($packages) = @_;
-#    require pkgs;
-#    if (pkgs::packageByName($packages, "NVIDIA_GLX")) {
-#	#- at this point, we can allow using NVIDIA 3D acceleration packages.
-#	my @rpms;
-#	foreach (keys %{$packages->{names}}) {
-#	    my ($ext, $version, $release) = /kernel[^-]*(-smp|-enterprise|-secure)?(?:-(\d.*?)\.(\d+\.\d+mdk))?$/ or next;
-#	    my $p = pkgs::packageByName($packages, $_);
-#	    pkgs::packageSelectedOrInstalled($p) or next;
-#	    $version or ($version, $release) = (pkgs::packageVersion($p), pkgs::packageRelease($p));
-#	    my $name = "NVIDIA_kernel-$version-$release$ext";
-#	    pkgs::packageByName($packages, $name) or return;
-#	    push @rpms, $name;
-#	}
-#	@rpms > 0 or return;
-#	return [ @rpms, "NVIDIA_GLX" ];
-#    }
-#};
-
-use detect_devices;
-package detect_devices;
-
-undef *usbMice;
-*usbMice = sub { grep { ($_->{media_type} =~ /\|Mouse/ || $_->{driver} =~ /Mouse:USB/) &&
-			  $_->{driver} !~ /Tablet:wacom/} usb_probe() };
-
-use Xconfigurator;
-package Xconfigurator;
-
-undef *cardConfigurationAuto;
-*cardConfigurationAuto = sub {
-    my @cards;
-    if (my @c = grep { $_->{driver} =~ /(Card|Server):/ } detect_devices::probeall()) {
-	@c >= 2 && $c[0]{description} eq $c[1]{description} && $c[0]{description} =~ /82830 CGC/ and shift @c;
-	foreach my $i (0..$#c) {
-	    local $_ = $c[$i]->{driver};
-	    my $card = { identifier => ($c[$i]{description} . (@c > 1 && " $i")) };
-	    $card->{type} = $1 if /Card:(.*)/;
-	    $card->{server} = $1 if /Server:(.*)/;
-	    $card->{driver} = $1 if /Driver:(.*)/;
-	    $card->{flags}{needVideoRam} = /86c368|S3 Inc|Tseng.*ET6\d00/;
-	    $card->{busid} = "PCI:$c[$i]{pci_bus}:$c[$i]{pci_device}:$c[$i]{pci_function}";
-	    push @{$card->{lines}}, @{$lines{$card->{identifier}} || []};
-	    push @cards, $card;
-	}
-    }
-    #- take a default on sparc if nothing has been found.
-    if (arch() =~ /^sparc/ && !@cards) {
-        log::l("Using probe with /proc/fb as nothing has been found!");
-	local $_ = cat_("/proc/fb");
-	if (/Mach64/) { push @cards, { server => "Mach64" } }
-	elsif (/Permedia2/) { push @cards, { server => "3DLabs" } }
-	else { push @cards, { server => "Sun24" } }
-    }
-    #- special case for dual head card using only one busid.
-    @cards = map { my $dup = $_->{identifier} =~ /MGA G[45]50/ ? 2 : 1;
-		   if ($dup > 1) {
-		       my @result;
-		       my $orig = $_;
-		       foreach (1..$dup) {
-			   my $card = {};
-			   add2hash($card, $orig);
-			   push @result, $card;
-		       }
-		       @result;
-		   } else {
-		       ($_);
-		   }
-	       } @cards;
-    #- make sure no type are already used, duplicate both screen
-    #- and rename type (because used as id).
-    if (@cards > 1) {
-	my $card = 1;
-	foreach (@cards) {
-	    updateCardAccordingName($_, $_->{type}) if $_->{type};
-	    $_->{type} = "$_->{type} $card";
-	    $card++;
-	}
-    }
-    #- in case of only one cards, remove all busid reference, this will avoid
-    #- need of change of it if the card is moved.
-    #- on many PPC machines, card is on-board, busid is important, leave?
-    @cards == 1 and delete $cards[0]{busid} if arch() !~ /ppc/;
-    @cards;
-};
-
-use mouse;
-package mouse;
-undef *detect;
-*detect = sub {
-    if (arch() =~ /^sparc/) {
-	return fullname2mouse("sunmouse|Sun - Mouse");
-    }
-    if (arch() eq "ppc") {
-        return fullname2mouse(detect_devices::hasMousePS2("usbmouse") ? 
-			      "USB|1 button" :
-			      #- No need to search for an ADB mouse.  If I did, the PPC kernel would
-			      #- find one whether or not I had one installed!  So..  default to it.
-			      "busmouse|1 button");
-    }
-
-    my @wacom;
-    my $fast_mouse_probe = sub {
-	my $auxmouse = detect_devices::hasMousePS2("psaux") && fullname2mouse("PS/2|Standard", unsafe => 1);
-
-	if (modules::get_alias("usb-interface")) {
-	    if (my (@l) = detect_devices::usbMice()) {
-		log::l("found usb mouse $_->{driver} $_->{description} ($_->{type})") foreach @l;
-		eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
-		if (!$@ && detect_devices::tryOpen("usbmouse")) {
-		    my $mouse = fullname2mouse($l[0]{driver} =~ /Mouse:(.*)/ ? $1 : "USB|Generic");
-		    $auxmouse and $mouse->{auxmouse} = $auxmouse; #- for laptop, we kept the PS/2 as secondary (symbolic).
-		    return $mouse;
-		}
-		eval { modules::unload($_) foreach qw(usbmouse mousedev hid) };
-	    }
-	}
-	$auxmouse;
-    };
-
-    if (modules::get_alias("usb-interface")) {
-	my $keep_mouse;
-	if (my (@l) = detect_devices::usbWacom()) {
-	    log::l("found usb wacom $_->{driver} $_->{description} ($_->{type})") foreach @l;
-	    eval { modules::load("wacom"); modules::load("evdev"); };
-	    unless ($@) {
-		foreach (0..$#l) {
-		    detect_devices::tryOpen("input/event$_") and $keep_mouse = 1, push @wacom, "input/event$_";
-		}
-	    }
-	    $keep_mouse or eval { modules::unload("evdev"); modules::unload("wacom"); };
-	}
-    }
-
-    #- at this level, not all possible mice are detected so avoid invoking serial_probe
-    #- which takes a while for its probe.
-    if ($::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$mouse and return ($mouse, @wacom);
-    }
-
-    #- probe serial device to make sure a wacom has been detected.
-    eval { modules::load("serial") };
-    my ($r, @serial_wacom) = mouseconfig(); push @wacom, @serial_wacom;
-
-    if (!$::isStandalone) {
-	my $mouse = $fast_mouse_probe->();
-	$r && $mouse and $r->{auxmouse} = $mouse; #- we kept the auxilliary mouse as PS/2.
-	$r and return ($r, @wacom);
-	$mouse and return ($mouse, @wacom);
-    } else {
-	$r and return ($r, @wacom);
-    }
-
-    #- in case only a wacom has been found, assume an inexistant mouse (necessary).
-    @wacom and return { CLASS      => 'MOUSE',
-			nbuttons   => 2,
-			device     => "nothing",
-			MOUSETYPE  => "Microsoft",
-			XMOUSETYPE => "Microsoft"}, @wacom;
-
-    if (!modules::get_alias("usb-interface") && detect_devices::is_a_recent_computer() && $::isInstall && !$::noauto) {
-	#- special case for non detected usb interface on a box with no mouse.
-	#- we *must* find out if there really is no usb, otherwise the box may
-	#- not be accessible via the keyboard (if the keyboard is USB)
-	#- the only way to know this is to make a full pci probe
-	modules::load_thiskind("usb", '', 'unsafe'); 
-	if (my $mouse = $fast_mouse_probe->()) {
-	    return $mouse;
-	}
-    }
-
-    if (modules::get_alias("usb-interface")) {
-	eval { modules::load($_) foreach qw(hid mousedev usbmouse) };
-	sleep 1;
-	if (!$@ && detect_devices::tryOpen("usbmouse")) {
-	    #- defaults to generic USB mouse on usbmouse.
-	    log::l("defaulting to usb generic mouse");
-	    return fullname2mouse("USB|Generic", unsafe => 1);
-	}
-    }
-
-    #- defaults to generic serial mouse on ttyS0.
-    #- Oops? using return let return a hash ref, if not using it, it return a list directly :-)
-    return fullname2mouse("serial|Generic 2 Button Mouse", unsafe => 1);
-};
diff --git a/perl-install/patch/patch-raidtab.pl b/perl-install/patch/patch-raidtab.pl
deleted file mode 100644
index de03a1b2a..000000000
--- a/perl-install/patch/patch-raidtab.pl
+++ /dev/null
@@ -1,37 +0,0 @@
-use detect_devices;
-package detect_devices;
-log::l("PATCHING");
-
-*raidAutoStartRaidtab = sub {
-    my (@parts) = @_;
-    log::l("patched raidAutoStartRaidtab");
-    $::isInstall or return;
-    require raid;
-    #- faking a raidtab, it seems to be working :-)))
-    #- (choosing any inactive md)
-    raid::inactivate_all();
-    foreach (@parts) {
-	my ($nb) = grep { !raid::is_active("md$_") } 0..7;
-	output("/tmp/raidtab", "raiddev /dev/md$nb\n  device " . devices::make($_->{device}) . "\n");
-	run_program::run('raidstart', '-c', "/tmp/raidtab", devices::make("md$nb"));
-    }
-    unlink "/tmp/raidtab";
-};
-
-use raid;
-package raid;
-
-*prepare_prefixed = sub {
-    my ($raids, $prefix) = @_;
-
-    log::l("patched prepare_prefixed");
-
-    $raids or return;
-
-    &write($raids, "/etc/raidtab") if ! -e "/etc/raidtab";
-    
-    eval { cp_af("/etc/raidtab", "$prefix/etc/raidtab") };
-    foreach (grep { $_ } @$raids) {
-	devices::make("$prefix/dev/$_->{device}") foreach @{$_->{disks}};
-    }
-};
diff --git a/perl-install/patch/patch-rh9-mdk10.pl b/perl-install/patch/patch-rh9-mdk10.pl
deleted file mode 100644
index a56c9497b..000000000
--- a/perl-install/patch/patch-rh9-mdk10.pl
+++ /dev/null
@@ -1,116 +0,0 @@
-
-warn "PATCHING\n";
-log::l("PATCHING\n");
-
-use install_any;
-
-undef *find_root_parts;
-*find_root_parts = sub {
-    my ($fstab, $prefix) = @_;
-    map { 
-	my $handle = any::inspect($_, $prefix);
-	my $s = $handle && cat_("$handle->{dir}/etc/redhat-release");
-	if ($s) {
-	    chomp($s);
-	    $s =~ s/\s+for\s+\S+//;
-	    log::l("find_root_parts found $_->{device}: $s");
-	    { release => $s, part => $_ };
-	} else { () }
-    } @$fstab;
-};
-
-
-use pkgs;
-package pkgs;
-
-my $old_compare_pkg = \&URPM::Package::compare_pkg;
-undef *URPM::Package::compare_pkg;
-*URPM::Package::compare_pkg = sub {
-    my ($lpkg, $rpkg) = @_;
-    my $c = ($lpkg->release =~ /mdk$/ ? 1 : 0) - ($rpkg->release =~ /mdk$/ ? 1 : 0);
-    if ($c) {
-	my $lpkg_ver = $lpkg->version . '-' . $lpkg->release;
-	my $rpkg_ver = $rpkg->version . '-' . $rpkg->release;
-	log::l($lpkg->name . ' ' . $rpkg->name . ': prefering ' . ($c == 1 ? "$lpkg_ver over $rpkg_ver" : "$rpkg_ver over $lpkg_ver"));
-	return $c;
-    }
-    &$old_compare_pkg;
-};
-
-my $old_compare = \&URPM::Package::compare;
-undef *URPM::Package::compare;
-*URPM::Package::compare = sub {
-    my ($lpkg, $rpkg_ver) = @_;
-    my $c = ($lpkg->release =~ /mdk$/ ? 1 : 0) - ($rpkg_ver =~ /mdk$/ ? 1 : 0);
-    if ($c) {
-	my $lpkg_ver = $lpkg->version . '-' . $lpkg->release;
-	log::l($lpkg->name . ' ' . ': prefering ' . ($c == 1 ? "$lpkg_ver over $rpkg_ver" : "$rpkg_ver over $lpkg_ver"));
-	return $c;
-    }
-    &$old_compare;
-};
-
-use install2;
-package install2;
-my $old_choosePackages = \&choosePackages;
-undef *choosePackages;
-*choosePackages = sub {
-    my @should_not_be_dirs = qw(/usr/X11R6/lib/X11/xkb /usr/share/locale/zh_TW/LC_TIME /usr/include/GL);
-    my @should_be_dirs = qw(/etc/X11/xkb);
-    foreach (@should_not_be_dirs) {
-	my $f = "$::prefix$_";
-	rm_rf($f) if !-l $f && -d $f;
-    }
-    foreach (@should_be_dirs) {
-	my $f = "$::prefix$_";
-	rm_rf($f) if -l $f || !-d $f;
-    }
-    unlink "$::prefix/etc/X11/XF86Config";
-    unlink "$::prefix/etc/X11/XF86Config-4";
-
-    &$old_choosePackages;
-};
-
-use fs;
-package fs;
-
-my $old = \&read_fstab;
-undef *read_fstab;
-*read_fstab = sub {
-    my @l = &$old;
-
-    my %label2device = map {
- 	my $dev = devices::make($_->{device});
-	if (my ($label) = `tune2fs -l $dev 2>/dev/null` =~ /volume name:\s*(\S+)/) {
-	    log::l("device $_->{device} has label $label");
-	    $label => $_->{device};
-	} else {
-	    ();
-	}
-    } fsedit::read_proc_partitions([]);
-
-    foreach (@l) {
-	my ($label) = ($_->{device_LABEL} || $_->{device}) =~ /^LABEL=(.*)/ or next;
-	if ($label2device{$label}) {
-	    $_->{device} = $label2device{$label};
-	} else {
-	    log::l("can't find label $label");
-	}
-    }
-
-    @l;
-};
-
-use any;
-package any;
-
-undef *fix_broken_alternatives;
-*fix_broken_alternatives = {
-    #- fix bad update-alternatives that may occurs after upgrade (and sometimes for install too).
-    -d "$::prefix/etc/alternatives" or return;
-
-    foreach (all("$::prefix/etc/alternatives")) {
-	log::l("setting alternative $_");
-	run_program::rooted($::prefix, 'update-alternatives', '--auto', $_);
-    }
-};
diff --git a/perl-install/patch/patch-stage2-updatemodules.pl b/perl-install/patch/patch-stage2-updatemodules.pl
deleted file mode 100644
index a62e83e46..000000000
--- a/perl-install/patch/patch-stage2-updatemodules.pl
+++ /dev/null
@@ -1,12 +0,0 @@
-# put this file in install/patch.pl, and boot with auto_install=install/patch.pl
-# put modules in install/modules and list them below
-
-my @modules = map { "install/modules/$_.ko" } 'tg3';
-
-foreach my $remote (@modules) {
-    my $local = '/tmp/' . basename($remote);
-    
-    install_any::getAndSaveFile($remote, $local);
-
-    run_program::run(["/usr/bin/insmod_", "insmod"], "-f", $local);
-}
diff --git a/perl-install/patch/rpmsrate.oem-9.0-openoffice b/perl-install/patch/rpmsrate.oem-9.0-openoffice
deleted file mode 100644
index a8d40cd0f..000000000
--- a/perl-install/patch/rpmsrate.oem-9.0-openoffice
+++ /dev/null
@@ -1,551 +0,0 @@
-LSB
-  5 lsb
-
-GRAPHICAL_DESKTOP
-  4 WindowMaker icewm
-  3 Epplets WMRack blackbox enlightenment ethemes icepref
-    wmakerconf xlockmore xfce
-  2 wmnet
-  1 lesstif-mwm xbanner
-
-GNOME
-  5 gnome-panel nautilus gnome-control-center metacity gnome-terminal yelp
-    nautilus-gtkhtml
-  4 gnome-tiles gdm gnome-applets gnome-user-docs gtk-themes file-roller
-    gnome-network gnome-utils xlockmore gtk-engines2 
-    gnome-vfs-extras gconf-editor
-  3 gnome-pilot
-  2 bug-buddy
-
-KDE
-  5 kdebase kdebase-nsplugins
-  5 kde-i18n-af kde-i18n-az kde-i18n-bg kde-i18n-ca kde-i18n-cs kde-i18n-da kde-i18n-de kde-i18n-el kde-i18n-en_GB kde-i18n-eo kde-i18n-es kde-i18n-et kde-i18n-fi kde-i18n-fr kde-i18n-he kde-i18n-hu kde-i18n-is kde-i18n-it kde-i18n-ja kde-i18n-ko kde-i18n-lt kde-i18n-lv kde-i18n-nl kde-i18n-no kde-i18n-no_NY kde-i18n-pl kde-i18n-pt kde-i18n-pt_BR kde-i18n-ro kde-i18n-ru kde-i18n-sk kde-i18n-sl kde-i18n-sr kde-i18n-sv kde-i18n-ta kde-i18n-th kde-i18n-tr kde-i18n-uk kde-i18n-zh_CN.GB2312 kde-i18n-zh_TW.Big5 
-  4 kdeaddutils kdeadmin kdegraphics kdemultimedia kdenetwork krozat
-    kdepim kdetoys kdeutils quanta 
-
-  2 kdesdk kdoc
-
-VIDEO
-  4 xine-ui xine-oss xine-xv powerdvd RealPlayer
-  3 nist xanim xmms-smpeg xmovie 
-  2 mtv mtv-fullscreen-extension
-  1 bcast mpeg2_movie
-TV
-  4 zapping xawtv gatos
-  4 KDE kwintv
-
-OFFICE
-  4 staroffice-de staroffice-en staroffice-es staroffice-fr staroffice-it
-    acroread acroread-nppdf
-    OpenOffice.org OpenOffice.org-l10n-ca OpenOffice.org-l10n-cs OpenOffice.org-l10n-da OpenOffice.org-l10n-de OpenOffice.org-l10n-el OpenOffice.org-l10n-en OpenOffice.org-l10n-es OpenOffice.org-l10n-fr OpenOffice.org-l10n-it OpenOffice.org-l10n-ja OpenOffice.org-l10n-ko OpenOffice.org-l10n-nl OpenOffice.org-l10n-pl OpenOffice.org-l10n-pt OpenOffice.org-l10n-ru OpenOffice.org-l10n-sv OpenOffice.org-l10n-tr
-  4 cbb gaddr xpdf moneydance
-  3 wv ical pyDict
-  2 units lyx
-  GNOME
-    4 gnome-pim gnome-pim-conduits gnumeric mrproject
-    3 dia gnome-pilot-conduits Guppi
-    2 ggv gnucash
-  KDE
-    3 koffice
-    3 koffice-i18n-az koffice-i18n-bg koffice-i18n-cs koffice-i18n-da koffice-i18n-de koffice-i18n-en_GB koffice-i18n-eo koffice-i18n-es koffice-i18n-et koffice-i18n-fr koffice-i18n-hu koffice-i18n-it koffice-i18n-ja koffice-i18n-lt koffice-i18n-mt koffice-i18n-nl koffice-i18n-no koffice-i18n-no_NY koffice-i18n-pl koffice-i18n-pt koffice-i18n-pt_BR koffice-i18n-ro koffice-i18n-ru koffice-i18n-sk koffice-i18n-sl koffice-i18n-sv koffice-i18n-ta koffice-i18n-tr koffice-i18n-uk
-    2 klyx
-
-SOUND
-  5 sox
-  4 aumix
-  4 KDE xmms-arts
-
-AUDIO
-  4 grip xmms xmms-skins
-  4 GNOME gnome-audio gnome-media
-  4 KDE kdelibs-sound
-  4 3D xmms-mesa
-  3 cdp cdparanoia cdrecord-cdda2wav space_sounds timidity-instruments xmms-esd
-    xmms-kjofol-skins xmms-more-vis-plugins
-  3 GNOME gnome-audio-extra 
-  2 mokmod mp3info mpg123 playmidi playmidi-X11 xmms-mikmod
-
-  4 HW"Rio 500" rio500 grio500
-
-ACCESSIBILITY
-  2 gtkeyboard
-
-PUBLISHING
-  5 enscript ghostscript-module-X
-  4 ghostscript-utils gv psutils texinfo nlpr
-  2 latex2html jadetex tetex-afm tetex-dvips tetex-latex tetex-xdvi tetex-latex-arab tetex-latex-heb docbook-dtd31-sgml
-  2 BOOKS tetex-doc
-  1 docbook-style-dsssl openjade sgml-tools ghostscript-module-SVGALIB cttex
-  1 BOOKS docbook-style-dsssl-doc
-
-  5 CUPS 
-      cups-drivers xpp
-  5 CUPS || LPR foomatic
-  1 CUPS hpoj
-
-SHELLS
-  3 zsh
-  3 BOOKS bash-doc zsh-doc
-  2 eshell pdksh tcsh
-  1 bash1
-
-SCIENCES
-  5 3D openuniverse
-  4 gnuplot gtkgraphh
-  3 xlispstat HDF
-  2 mathplot octave
-  1 xoscope
-
-EDITORS
-  4 emacs-X11
-  3 GXedit vim-X11 yudit
-  2 nedit cooledit emacs-tramp joe emacs-leim jed-xjed xemacs xemacs-extras xemacs-info
-  1 auctex emacs-el jed xemacs-el emacs-nox xwpe xwpe-X11
-  GNOME
-    4 gedit
-
-TEXT_TOOLS
-  5 words
-  4 groff patch recode rgrep
-  4 ispell-af ispell-br ispell-ca ispell-cs ispell-da ispell-de ispell-el ispell-en ispell-eo ispell-es ispell-fi ispell-fr ispell-ga ispell-gd ispell-gv ispell-id ispell-it ispell-nl ispell-no ispell-pl ispell-pt ispell-pt_BR ispell-ro ispell-ru ispell-sk ispell-sl ispell-sv
-  3 ed
-  2 groff-gxditview lout
-  BOOKS
-    3 gawk-doc
-    1 lout-doc
-
-COMMUNICATIONS
-  4 efax
-  3 jpilot pilot-link
-  2 hylafax-server hylafax-client dip
-  2 lrzsz mgetty mgetty-contrib mgetty-sendfax mgetty-viewfax mgetty-voice minicom
-  1 jpilot-Mail jpilot-syncmal statserial tkbabel
-
-TERMINALS
-  5 open xterm
-  4 screen kon2
-  3 Eterm vlock
-  1 aterm x3270
-
-  4 KDE ktelnet
-  4 GNOME gnome-telnet
-  4 LOCALES"ja" kterm 
-
-NETWORKING_CHAT
-  3 talk ytalk
-NETWORKING_CHAT_SERVER
-  4 jabber 
-  3 talk-server
-
-NETWORKING_FILE_TRANSFER
-  5 lftp mirrordir rsync
-  4 gftp rdist
-  3 fmirror ncftp tftp
-  3 GNOME dpsftp
-  2 uucp
-
-NETWORKING_FILE_TRANSFER_SERVER
-  4 proftpd bwbserver_linux
-  2 wu-ftpd anonftp
-
-NETWORKING_LDAP_SERVER
-  4 openldap directory_administrator
-
-NETWORKING_INSTANT_MESSAGING
-  4 licq
-  3 everybuddy licq-console licq-rms
-  GNOME
-    5 aspell-br aspell-ca aspell-cs aspell-da aspell-de aspell-de_CH aspell-en aspell-en_CA aspell-en_GB aspell-eo aspell-es aspell-fr aspell-it aspell-nl aspell-no aspell-pl aspell-sv
-    4 gnomeicu gabber gaim
-    3 gtk+licq
-
-NETWORKING_IRC
-  3 BitchX mozilla-irc
-  3 GNOME xchat
-  2 irssi
-  1 eggdrop
-
-NETWORKING_FIREWALLING_SERVER
-  5 iproute2 routed iptables
-  3 prelude
-  1 portsentry 
-
-NETWORKING_GROUPWARE_SERVER
-  4 phpgroupware bwbserver_linux
-
-NETWORKING_MAIL
-  5 mailx metamail
-  4 faces mozilla-mail evolution
-  3 fetchmail urlview mutt
-  3 !GNOME !KDE xmailbox
-  2 FaxMail comsat elm faces-xface
-  1 exmh sylpheed fetchmail-daemon fetchmailconf
-NETWORKING_MAIL_SERVER
-  5 postfix 
-  4 mailman 
-
-NETWORKING_NEWS
-  5 GNOME pan
-  2 slrn tin trn 
-  1 slrn-pull xrn
-NETWORKING_NEWS_SERVER
-  4 inn 
-  3 inews 
-
-NETWORKING_OTHER
-  2 finger fwhois ucd-snmp-utils htdig macutils
-NETWORKING_OTHER_SERVER
-  3 dhcp-server gated timed ntp
-
-  3 intimed mcserv nscd imap pidentd
-    rdate bootparamd 
-    cleanfeed ucd-snmp leafnode
-    cvsweb nut-server
-    XFree86-Xvfb XFree86-Xnest
-  2 heartbeat diald finger-server mars-nwe
-
-NIS
-  5 ypbind
-NIS_SERVER
-  5 ypserv
-
-NETWORKING_REMOTE_ACCESS
-  5 openssh-clients telnet telnet-client-krb5
-    KDE lisa
-  4 traceroute rfbdrake
-  3 vnc
-  2 rsh
-  2 BOOKS vnc-doc
-NETWORKING_REMOTE_ACCESS_SERVER
-  5 openssh-server
-  4 rfbdrake
-  2 vnc-server
-  1 telnet-server-krb5 rsh-server
-
-NETWORKING_DNS
-  4 bind-utils 
-NETWORKING_DNS_SERVER
-  5 bind 
-  4 caching-nameserver
-  1 nslint
-
-NETWORKING_FILE
-  4 samba-client nfs-utils-clients
-  2 arkeia-gui arkeia-client arkeia-arkc
-  2 GNOME gnomba gtm
-  2 autofs
-  1 am-utils
-NETWORKING_FILE_SERVER 
-  5 nfs-utils
-  4 samba-server bwbserver_linux
-  3 BOOKS samba-doc 
-  2 arkeia-server samba-winbind
-  3 squid squidGuard
-
-NETWORKING_WWW
-  3 lynx 
-  4 !LOCALES"eu" netscape-communicator netscape-plugins 
-  4 wget links mozilla Flashplayer crossover-plugin-demo j2re
-  4 GNOME 
-      screem 
-      !LOCALES"eu" galeon 
-  3 plugger opera bluefish
-NETWORKING_WWW_SERVER
-  5 apache apache-mod_perl mod_ssl mod_php 
-  4 apache-suexec 
-    bwbserver_linux
-  4 BOOKS apache-manual
-  3 php-dba_gdbm_db2 php-gd php-imap php-ldap php-manual php-mysql php-oracle
-    php-pgsql php-readline php mod_sxnet auth_ldap HTML-Embperl
-  2 ApacheJServ
-  1 Zope Zope-core Zope-pcgi Zope-zserver
-
-GRAPHICS
-  4 ImageMagick giftrans gimp gphoto gphoto2 qiv ac3d
-  3 gimp-data-extras gqview sketch xwpick xli
-  2 gif2png gimp-perl xpcd xfig xpcd-gimp gd-utils cameleo
-  1 libgr-progs libungif-progs qcad transfig xpaint xmorph
-  1 3D Mesa-demos
-  GNOME
-    4 gnome-iconedit
-    3 ee
-
-ARCHIVING
-  5 dump ncompress sharutils unzip
-  4 gtkzip zip
-  3 unarj unstuff mt-st
-  2 taper
-  1 lha
-  GNOME
-    4 gnozip
-    3 gtktalog
-
-BURNER
-  5 mkisofs cdrecord
-  4 GNOME gnome-toaster gcombust
-  4 X xcdroast
-  2 X eroaster 
-  DEVELOPMENT
-    3 cdrecord-devel
-
-SCANNER
-  5 sane-frontends
-  4 gimp
-  4 xsane
-
-PHOTO
-  4 gphoto gphoto2
-  3 gnomemeeting openmcu
-
-DATABASES
-  5 postgresql
-  3 MySQL-client MySQL-shared
-  DATABASES_SERVER
-    4 postgresql-server
-    3 MySQL
-    3 postgresql-perl postgresql-python
-    2 postgresql-jdbc postgresql-tk postgresql-odbc postgresql-tcl postgresql-test
-  DEVELOPMENT 
-    4 perl-Mysql
-    3 postgresql-devel
-    1 MySQL-bench MySQL-devel
-
-GAMES
-  4 sin-demo
-  4 clanbomber freeciv lbreakout2 toppler frozen-bubble
-  3 shogo-demo 
-  3 cxhextris rocksndiamonds powermanga mures methane
-  2 Maelstrom pingus ltris penguin-command pysol xtrojka bunnies xpilot trophy xboard xgammon xkobo xpat2 xpuzzles xsoldier xfishtank
-  1 7colors xrally fortune-mod nil
-  GNOME
-    4 gnome-games
-    3 gnome-chess
-    2 3D gtulpas
-    1 gtkgo
-    DEVELOPMENT
-      2 gnomes-games-devel
-  KDE
-    4 kdegames
-    DEVELOPMENT
-      2 kdegames-devel
-  3D
-    4 csmash armagetron
-      !HW"Riva.*128" chromium tuxracer
-
-    3 !HW"Riva.*128" !HW"Rage X[CL]" !HW"Rage Mobility (?:P\/M|L) " !HW"3D Rage (?:LT|Pro)" 
-        bzflag
-
-DEVELOPMENT
-  5 autoconf automake m4 make 
-  3 autoconf2.5
-  1 tmake pmake pmake-customs
-
-  3 libtool binutils ltrace gdb gcc
-  2 gperf cdecl cproto indent ElectricFence
-  1 egcs glibc-profile xxgdb
-
-  4 gcc-c++ libstdc++5-devel libstdc++-devel
-  2 libsigc++-examples
-  1 egcs-c++ 
-
-  3 bison flex
-  2 byacc
-
-  2 doxygen C++2LaTeX
-
-  3 jikes kaffe
-  1 gcc-java
-
-  5 cvs rcs
-  2 diffstat tkcvs
-
-  3 swig
-
-  4 python veepee tkinter
-  3 libpython2.2-devel python-devel python-imaging pygtk-glarea pygtk pygtk-libglade rpm-python
-
-  4 perl perl-Term-Readline-Gnu perl-libnet perl-libwww-perl perl-devel
-  3 perl-DBI perl-Digest-MD5 perl-IO-stringy perl-PDL perl-Parse-RecDescent 
-    perl-GTK-GLArea perl-Tk perlftlib eperl perl-URI perl-DB_File
-    perl-Data-ShowTable perl-HTML-Parser perl-HTML-SimpleParse perl-MIME-Base64
-    perl-MIME-tools perl-MP3-Info perl-MailTools perl-Msgcat
-
-  4 rpm-build
-  3 rpmlint rpm-devel
-  3 kernel-source
-
-  2 gcc-g77 nasm dev86 
-  1 gcc-objc
-
-  2 teyjus gprolog ocaml umb-scheme mawk guile clisp SmallEiffel p2c 
-    ghc ghc-prof happy haskell-GTK haskell-GTK-devel hugs98 mercury swi-prolog 
-    ruby-extensions ruby-gtk ruby 
-
-  4 gettext-devel
-
-  BOOKS
-    2 pam-doc python-docs slang-doc kernel-doc nasm-doc qt2-doc ruby-doc lkmpg
-
-  KDE
-    3 kdevelop
-    3 kdebase-devel kdegraphics-devel kdelibs-devel kdelibs-sound-devel
-      kdemultimedia-devel kdenetwork-devel
-    1 kdesupport-devel kdeaddutils-devel koffice-devel
-
-  GNOME
-    4 perl-GTK-Glade perl-GTK-Gnome 
-    3 memprof glade gnome-guile pygnome libgnomeui2_0-devel gnome-guile-devel
-      gnome-pim-devel gob 
-    2 pygnome-applet pygnome-capplet pygnome-libglade rep-gtk-gnome
-      libgnomemm-1.2_9-devel gnomemm-devel libgnome-pilot1-devel gnome-pilot-devel glademm 
-    1 gnucash-devel rep-gtk-libglade
-
-  DEVELOPMENT_OTHER
-    2 ImageMagick-devel Mesa-common-devel libXaw3d7-devel Xaw3d-devel detect-devel
-      libgd2-devel gd-devel p2c-devel libgmp3-devel gmp-devel libguile9-devel guile-devel libgr-devel libjpeg62-devel libjpeg-devel libpng3-devel libpng-devel
-      libtermcap2-devel libtermcap-devel libtiff3-devel libtiff-devel libungif4-devel libungif-devel libxml2-devel libxml-devel
-      linuxconf-devel libslang1-devel slang-devel sox-devel zlib1-devel zlib-devel XFree86-devel dev86-devel
-      libgdk-pixbuf2-devel gdk-pixbuf-devel libgimp1.2_1-devel gimp-devel libgpm1-devel gpm-devel kudzu-devel libghttp1-devel libghttp-devel libgtop2.0_0-devel libgtop-devel
-      libmikmod2-devel libmikmod-devel librep9-devel librep-devel libunicode-devel popt-devel pwdb-devel t1lib1-devel t1lib-devel
-      ucd-snmp-devel mpeg_lib-devel WindowMaker-devel aalib-devel libadns1-devel adns-devel
-      alsa-lib-devel audiofile-devel libcups1-devel cups-devel e2fsprogs-devel egcs-objc-devel
-      libg-wrap2-devel g-wrap-devel gkrellm-devel ibtk libPropList-devel licq-devel openldap-devel
-      libparted1.6-devel parted-devel pciutils-devel pilot-link-devel svgalib-devel
-      recode-devel libaspell10-devel aspell-devel cracklib-devel faces-devel fnlib-devel
-      freetype-devel libgtk+mdk0.1_6-devel gtk+mdk-devel libgtkglarea5-devel gtkglarea-devel XFree86-static-libs imap-devel
-      php-devel libpth14-devel pth-devel libsane1-devel sane-devel swig-devel xdelta-devel isapnptools-devel
-      libpango1.0_0-devel pango-devel readline-devel
-
-MONITORING
-  5 procinfo psacct
-  5 PCMCIA apmd
-  4 lsof swatch tcpdump traceroute
-  3 iplog arpwatch lslk nmap nmap-frontend procps-X11 xcpustate xsysinfo
-  2 cfengine gkrellm gps rusers mon xosview 3D xtraceroute
-  1 logcheck bonnie
-  GNOME
-    4 gnome-system-monitor
-
-FILE_TOOLS
-  5 file gnupg mkxauth mtools slocate
-  4 symlinks
-  3 dosfstools draksync mc tree
-  2 git gentoo sfm xwc FileRunner
-  1 xdelta
-
-WEBMIN
-  3 webmin
-
-WIZARDS
-  5 drakwizard
-
-CONFIG
-  4 linuxconf linuxconf-lang-cs linuxconf-lang-de linuxconf-lang-es linuxconf-lang-fi linuxconf-lang-fr linuxconf-lang-hu linuxconf-lang-it linuxconf-lang-ko linuxconf-lang-no linuxconf-lang-pt linuxconf-lang-ro linuxconf-lang-sk linuxconf-lang-sv linuxconf-lang-zh
-  4 X gnome-linuxconf
-  3 ipvsadm quota usernet nut
-  2 gfcc control-panel adjtimex isicom xinput timeconfig samba-swat
-  1 ipxutils
-
-BOOKS
-  3 mandrake_doc-de mandrake_doc-en mandrake_doc-es mandrake_doc-fr mandrake_doc-it mandrake_doc-ru
-
-X
-  5 XFree86 rxvt XFree86-75dpi-fonts urw-fonts
-  5 icewm-light
-
-  4 vim-enhanced
-  4 gurpmi rpmdrake drakconf userdrake fonts-ttf-decoratives fonts-ttf-west_european
-    mandrake-mime menudrake mandrake_desk
-    mdkonline drakfirsttime gtk-engines bootsplash
-  4 LOCALES"ja" || LOCALES"ko" || LOCALES"zh" rxvt-CJK 
-
-  3 XFree86-100dpi-fonts draksync drakprofile
-  3 USB usbview
-  2 LOCALES"ja" || LOCALES"ko" || LOCALES"zh" jmcce 
-  2 tksysv imlib-cfgeditor
-  1 DrakeLogo Mesa xtoolwait X11R6-contrib 
-
-  GNOME
-    3 gnorpm
-
-  5 xcin Chinput xa+cv xvnkb FreeWnn ami kinput2-wnn4
-
-  2 app-defaults-be app-defaults-cs app-defaults-ga app-defaults-ru app-defaults-th app-defaults-uk
-
-  5 CHARSET"iso-8859-13" fonts-type1-baltic
-    LOCALES"ru" || LOCALES"uk" XFree86-cyrillic-fonts
-    LOCALES"he" fonts-hebrew-elmar
-    LOCALES"hy" fonts-ttf-armenian
-    LOCALES"ja" fonts-ttf-japanese
-    LOCALES"ko" fonts-ttf-korean
-    LOCALES"ta" fonts-ttf-tscii fonts-bitmap-tscii
-    LOCALES"th" fonts-ttf-thai
-    LOCALES"zh_CN" || LOCALES"zh" fonts-ttf-gb2312
-    LOCALES"zh_TW" || LOCALES"zh" taipeifonts fonts-ttf-big5
-
-DOCS
-  5 man info man-pages
-
-SYSTEM
-  5 at MAKEDEV eject ldetect devfsd
-    locales iputils urpmi cpio msec tmpwatch
-
-  5 HIGH_SECURITY libsafe kernel-secure-2.4.19.16mdk kernel-secure
-  5 BIGMEM kernel-enterprise-2.4.19.16mdk kernel-enterprise
-  5 SMP kernel-smp-2.4.19.16mdk kernel-smp
-  5 PCMCIA pcmcia-cs
-  5 USB hotplug
-
-  5 HW"nForce.*(?:Audio|Network)" 
-     NVIDIA_nforce-2.4.19-16mdk
-     BIGMEM NVIDIA_nforce-2.4.19-16mdk-enterprise
-
-  4 ftp-client-krb5 gpm hexedit strace sudo grub procmail gnupg
-
-  3 bc
-  2 sndconfig kernel-utils acpid adns audiofile freeswan awesfx fbset vlan-utils
-  1 fdutils genromfs mailcap pinfo
-
-  BOOKS 
-    5 man-pages-cs man-pages-da man-pages-de man-pages-es man-pages-fr man-pages-hu man-pages-id man-pages-it man-pages-ja man-pages-ko man-pages-pl man-pages-ru man-pages-zh
-    3 grub-doc lilo-doc
-      howto-html-de howto-html-el howto-html-en howto-html-es howto-html-fr howto-html-hr howto-html-hu howto-html-id howto-html-it howto-html-ja howto-html-ko howto-html-nl howto-html-pl howto-html-ro howto-html-sl howto-html-sv howto-html-zh
-
-  4 NIS yp-tools
-  3 PCMCIA irda-utils
-  3 USB usbutils
-
-  4 LOCALES"ar" || LOCALES"fa" || LOCALES"he" || LOCALES"yi" acon
-  3 LOCALES"zh" zh-autoconvert
-
-EMULATORS
-  3 wine
-  2 BasiliskII-jit
-  1 BasiliskII
-  2 xdosemu 
-  1 xmame xmess
-
-INSTALL
-  NOCOPY
-    5 kernel-2.4.19.16mdk kernel-2.4.19.16mdk kernel kernel-smp-2.4.19.16mdk kernel-smp-2.4.19.16mdk kernel-smp kernel-enterprise-2.4.19.16mdk kernel-enterprise-2.4.19.16mdk kernel-enterprise
-      raidtools lvm reiserfsprogs jfsprogs xfsprogs 
-      alsa alsa-utils
-    4 XFree86
-
-  5 pptp-adsl dhcpcd dhcpxd dhcp-client isdn4net isdn-light isdn4k-utils ibod rp-pppoe pump wireless-tools speedtouch
-    ppp nfs-utils-clients
-    autologin ntp cups-drivers samba ncpfs hpoj ucd-snmp libptal0
-    libhpojip0 libsnmp0 xojpanel libsane-hpoj0
-    ipchains shorewall iptables printer-utils rlpr samba-client
-    xpp pdq printer-testpages nmap scli net-tools
-    cups lpr foomatic gimpprint
-    nc sndconfig 
-    ImageMagick ghostscript printer-filters mpage a2ps ppdfilt libppd1 gpr groff libgimpprint1 numlock curl
-    sane-backends sane-frontends xsane xsane-gimp mtools mtoolsfm
-    hotplug dev ypbind speedtouch_mgmt
-  4 XFree86-server XFree86-FBDev
-#  4 XFree86-SVGA XFree86-server XFree86-Mach64 XFree86-FBDev
-#    XFree86-glide-module Device3Dfx Glide_V3-DRI Glide_V5 Mesa
-#  3 XFree86-S3 XFree86-S3V XFree86-VGA16
-#  2 XFree86-8514 XFree86-AGX XFree86-I128 XFree86-Mach32 XFree86-Mach8 XFree86-Mono XFree86-P9000 XFree86-W32
-#  1 XFree86-3DLabs XFree86-Sun XFree86-SunMono XFree86-Sun24 
diff --git a/perl-install/patch/rpmsrate.oem-9.0-staroffice b/perl-install/patch/rpmsrate.oem-9.0-staroffice
deleted file mode 100644
index 179e19d06..000000000
--- a/perl-install/patch/rpmsrate.oem-9.0-staroffice
+++ /dev/null
@@ -1,552 +0,0 @@
-LSB
-  5 lsb
-
-GRAPHICAL_DESKTOP
-  4 icewm
-  3 WindowMaker
-  3 Epplets WMRack blackbox enlightenment ethemes icepref
-    wmakerconf xlockmore xfce
-  2 wmnet
-  1 lesstif-mwm xbanner
-
-GNOME
-  5 gnome-panel nautilus gnome-control-center metacity gnome-terminal yelp
-    nautilus-gtkhtml
-  4 gnome-tiles gdm gnome-applets gnome-user-docs gtk-themes file-roller
-    gnome-network gnome-utils xlockmore gtk-engines2 
-    gnome-vfs-extras gconf-editor
-  3 gnome-pilot
-  2 bug-buddy
-
-KDE
-  5 kdebase kdebase-nsplugins
-  5 kde-i18n-af kde-i18n-az kde-i18n-bg kde-i18n-ca kde-i18n-cs kde-i18n-da kde-i18n-de kde-i18n-el kde-i18n-en_GB kde-i18n-eo kde-i18n-es kde-i18n-et kde-i18n-fi kde-i18n-fr kde-i18n-he kde-i18n-hu kde-i18n-is kde-i18n-it kde-i18n-ja kde-i18n-ko kde-i18n-lt kde-i18n-lv kde-i18n-nl kde-i18n-no kde-i18n-no_NY kde-i18n-pl kde-i18n-pt kde-i18n-pt_BR kde-i18n-ro kde-i18n-ru kde-i18n-sk kde-i18n-sl kde-i18n-sr kde-i18n-sv kde-i18n-ta kde-i18n-th kde-i18n-tr kde-i18n-uk kde-i18n-zh_CN.GB2312 kde-i18n-zh_TW.Big5 
-  4 kdeaddutils kdeadmin kdegraphics kdemultimedia kdenetwork krozat
-    kdepim kdetoys kdeutils quanta 
-
-  2 kdesdk kdoc
-
-VIDEO
-  4 xine-ui xine-oss xine-xv powerdvd RealPlayer
-  3 nist xanim xmms-smpeg xmovie 
-  2 mtv mtv-fullscreen-extension
-  1 bcast mpeg2_movie
-TV
-  4 zapping xawtv gatos
-  4 KDE kwintv
-
-OFFICE
-  4 staroffice-de staroffice-en staroffice-es staroffice-fr staroffice-it
-    acroread acroread-nppdf
-  3 OpenOffice.org OpenOffice.org-l10n-ca OpenOffice.org-l10n-cs OpenOffice.org-l10n-da OpenOffice.org-l10n-de OpenOffice.org-l10n-el OpenOffice.org-l10n-en OpenOffice.org-l10n-es OpenOffice.org-l10n-fr OpenOffice.org-l10n-it OpenOffice.org-l10n-ja OpenOffice.org-l10n-ko OpenOffice.org-l10n-nl OpenOffice.org-l10n-pl OpenOffice.org-l10n-pt OpenOffice.org-l10n-ru OpenOffice.org-l10n-sv OpenOffice.org-l10n-tr
-  4 cbb gaddr xpdf moneydance
-  3 wv ical pyDict
-  2 units lyx
-  GNOME
-    4 gnome-pim gnome-pim-conduits gnumeric mrproject
-    3 dia gnome-pilot-conduits Guppi
-    2 ggv gnucash
-  KDE
-    3 koffice
-    3 koffice-i18n-az koffice-i18n-bg koffice-i18n-cs koffice-i18n-da koffice-i18n-de koffice-i18n-en_GB koffice-i18n-eo koffice-i18n-es koffice-i18n-et koffice-i18n-fr koffice-i18n-hu koffice-i18n-it koffice-i18n-ja koffice-i18n-lt koffice-i18n-mt koffice-i18n-nl koffice-i18n-no koffice-i18n-no_NY koffice-i18n-pl koffice-i18n-pt koffice-i18n-pt_BR koffice-i18n-ro koffice-i18n-ru koffice-i18n-sk koffice-i18n-sl koffice-i18n-sv koffice-i18n-ta koffice-i18n-tr koffice-i18n-uk
-    2 klyx
-
-SOUND
-  5 sox
-  4 aumix
-  4 KDE xmms-arts
-
-AUDIO
-  4 grip xmms xmms-skins
-  4 GNOME gnome-audio gnome-media
-  4 KDE kdelibs-sound
-  4 3D xmms-mesa
-  3 cdp cdparanoia cdrecord-cdda2wav space_sounds timidity-instruments xmms-esd
-    xmms-kjofol-skins xmms-more-vis-plugins
-  3 GNOME gnome-audio-extra 
-  2 mokmod mp3info mpg123 playmidi playmidi-X11 xmms-mikmod
-
-  4 HW"Rio 500" rio500 grio500
-
-ACCESSIBILITY
-  2 gtkeyboard
-
-PUBLISHING
-  5 enscript ghostscript-module-X
-  4 ghostscript-utils gv psutils texinfo nlpr
-  2 latex2html jadetex tetex-afm tetex-dvips tetex-latex tetex-xdvi tetex-latex-arab tetex-latex-heb docbook-dtd31-sgml
-  2 BOOKS tetex-doc
-  1 docbook-style-dsssl openjade sgml-tools ghostscript-module-SVGALIB cttex
-  1 BOOKS docbook-style-dsssl-doc
-
-  5 CUPS 
-      cups-drivers xpp
-  5 CUPS || LPR foomatic
-  1 CUPS hpoj
-
-SHELLS
-  3 zsh
-  3 BOOKS bash-doc zsh-doc
-  2 eshell pdksh tcsh
-  1 bash1
-
-SCIENCES
-  5 3D openuniverse
-  4 gnuplot gtkgraphh
-  3 xlispstat HDF
-  2 mathplot octave
-  1 xoscope
-
-EDITORS
-  4 emacs-X11
-  3 GXedit vim-X11 yudit
-  2 nedit cooledit emacs-tramp joe emacs-leim jed-xjed xemacs xemacs-extras xemacs-info
-  1 auctex emacs-el jed xemacs-el emacs-nox xwpe xwpe-X11
-  GNOME
-    4 gedit
-
-TEXT_TOOLS
-  5 words
-  4 groff patch recode rgrep
-  4 ispell-af ispell-br ispell-ca ispell-cs ispell-da ispell-de ispell-el ispell-en ispell-eo ispell-es ispell-fi ispell-fr ispell-ga ispell-gd ispell-gv ispell-id ispell-it ispell-nl ispell-no ispell-pl ispell-pt ispell-pt_BR ispell-ro ispell-ru ispell-sk ispell-sl ispell-sv
-  3 ed
-  2 groff-gxditview lout
-  BOOKS
-    3 gawk-doc
-    1 lout-doc
-
-COMMUNICATIONS
-  4 efax
-  3 jpilot pilot-link
-  2 hylafax-server hylafax-client dip
-  2 lrzsz mgetty mgetty-contrib mgetty-sendfax mgetty-viewfax mgetty-voice minicom
-  1 jpilot-Mail jpilot-syncmal statserial tkbabel
-
-TERMINALS
-  5 open xterm
-  4 screen kon2
-  3 Eterm vlock
-  1 aterm x3270
-
-  4 KDE ktelnet
-  4 GNOME gnome-telnet
-  4 LOCALES"ja" kterm 
-
-NETWORKING_CHAT
-  3 talk ytalk
-NETWORKING_CHAT_SERVER
-  4 jabber 
-  3 talk-server
-
-NETWORKING_FILE_TRANSFER
-  5 lftp mirrordir rsync
-  4 gftp rdist
-  3 fmirror ncftp tftp
-  3 GNOME dpsftp
-  2 uucp
-
-NETWORKING_FILE_TRANSFER_SERVER
-  4 proftpd bwbserver_linux
-  2 wu-ftpd anonftp
-
-NETWORKING_LDAP_SERVER
-  4 openldap directory_administrator
-
-NETWORKING_INSTANT_MESSAGING
-  4 licq
-  3 everybuddy licq-console licq-rms
-  GNOME
-    5 aspell-br aspell-ca aspell-cs aspell-da aspell-de aspell-de_CH aspell-en aspell-en_CA aspell-en_GB aspell-eo aspell-es aspell-fr aspell-it aspell-nl aspell-no aspell-pl aspell-sv
-    4 gnomeicu gabber gaim
-    3 gtk+licq
-
-NETWORKING_IRC
-  3 BitchX mozilla-irc
-  3 GNOME xchat
-  2 irssi
-  1 eggdrop
-
-NETWORKING_FIREWALLING_SERVER
-  5 iproute2 routed iptables
-  3 prelude
-  1 portsentry 
-
-NETWORKING_GROUPWARE_SERVER
-  4 phpgroupware bwbserver_linux
-
-NETWORKING_MAIL
-  5 mailx metamail
-  4 faces mozilla-mail evolution
-  3 fetchmail urlview mutt
-  3 !GNOME !KDE xmailbox
-  2 FaxMail comsat elm faces-xface
-  1 exmh sylpheed fetchmail-daemon fetchmailconf
-NETWORKING_MAIL_SERVER
-  5 postfix 
-  4 mailman 
-
-NETWORKING_NEWS
-  5 GNOME pan
-  2 slrn tin trn 
-  1 slrn-pull xrn
-NETWORKING_NEWS_SERVER
-  4 inn 
-  3 inews 
-
-NETWORKING_OTHER
-  2 finger fwhois ucd-snmp-utils htdig macutils
-NETWORKING_OTHER_SERVER
-  3 dhcp-server gated timed ntp
-
-  3 intimed mcserv nscd imap pidentd
-    rdate bootparamd 
-    cleanfeed ucd-snmp leafnode
-    cvsweb nut-server
-    XFree86-Xvfb XFree86-Xnest
-  2 heartbeat diald finger-server mars-nwe
-
-NIS
-  5 ypbind
-NIS_SERVER
-  5 ypserv
-
-NETWORKING_REMOTE_ACCESS
-  5 openssh-clients telnet telnet-client-krb5
-    KDE lisa
-  4 traceroute rfbdrake
-  3 vnc
-  2 rsh
-  2 BOOKS vnc-doc
-NETWORKING_REMOTE_ACCESS_SERVER
-  5 openssh-server
-  4 rfbdrake
-  2 vnc-server
-  1 telnet-server-krb5 rsh-server
-
-NETWORKING_DNS
-  4 bind-utils 
-NETWORKING_DNS_SERVER
-  5 bind 
-  4 caching-nameserver
-  1 nslint
-
-NETWORKING_FILE
-  4 samba-client nfs-utils-clients
-  2 arkeia-gui arkeia-client arkeia-arkc
-  2 GNOME gnomba gtm
-  2 autofs
-  1 am-utils
-NETWORKING_FILE_SERVER 
-  5 nfs-utils
-  4 samba-server bwbserver_linux
-  3 BOOKS samba-doc 
-  2 arkeia-server samba-winbind
-  3 squid squidGuard
-
-NETWORKING_WWW
-  3 lynx 
-  4 !LOCALES"eu" netscape-communicator netscape-plugins 
-  4 wget links mozilla Flashplayer crossover-plugin-demo j2re
-  4 GNOME 
-      screem 
-      !LOCALES"eu" galeon 
-  3 plugger opera bluefish
-NETWORKING_WWW_SERVER
-  5 apache apache-mod_perl mod_ssl mod_php 
-  4 apache-suexec 
-    bwbserver_linux
-  4 BOOKS apache-manual
-  3 php-dba_gdbm_db2 php-gd php-imap php-ldap php-manual php-mysql php-oracle
-    php-pgsql php-readline php mod_sxnet auth_ldap HTML-Embperl
-  2 ApacheJServ
-  1 Zope Zope-core Zope-pcgi Zope-zserver
-
-GRAPHICS
-  4 ImageMagick giftrans gimp gphoto gphoto2 qiv ac3d
-  3 gimp-data-extras gqview sketch xwpick xli
-  2 gif2png gimp-perl xpcd xfig xpcd-gimp gd-utils cameleo
-  1 libgr-progs libungif-progs qcad transfig xpaint xmorph
-  1 3D Mesa-demos
-  GNOME
-    4 gnome-iconedit
-    3 ee
-
-ARCHIVING
-  5 dump ncompress sharutils unzip
-  4 gtkzip zip
-  3 unarj unstuff mt-st
-  2 taper
-  1 lha
-  GNOME
-    4 gnozip
-    3 gtktalog
-
-BURNER
-  5 mkisofs cdrecord
-  4 GNOME gnome-toaster gcombust
-  4 X xcdroast
-  2 X eroaster 
-  DEVELOPMENT
-    3 cdrecord-devel
-
-SCANNER
-  5 sane-frontends
-  4 gimp
-  4 xsane
-
-PHOTO
-  4 gphoto gphoto2
-  3 gnomemeeting openmcu
-
-DATABASES
-  5 postgresql
-  3 MySQL-client MySQL-shared
-  DATABASES_SERVER
-    4 postgresql-server
-    3 MySQL
-    3 postgresql-perl postgresql-python
-    2 postgresql-jdbc postgresql-tk postgresql-odbc postgresql-tcl postgresql-test
-  DEVELOPMENT 
-    4 perl-Mysql
-    3 postgresql-devel
-    1 MySQL-bench MySQL-devel
-
-GAMES
-  4 sin-demo
-  3 clanbomber freeciv lbreakout2 toppler frozen-bubble
-  3 shogo-demo 
-  3 cxhextris rocksndiamonds powermanga mures methane
-  2 Maelstrom pingus ltris penguin-command pysol xtrojka bunnies xpilot trophy xboard xgammon xkobo xpat2 xpuzzles xsoldier xfishtank
-  1 7colors xrally fortune-mod nil
-  GNOME
-    3 gnome-games
-    3 gnome-chess
-    2 3D gtulpas
-    1 gtkgo
-    DEVELOPMENT
-      2 gnomes-games-devel
-  KDE
-    3 kdegames
-    DEVELOPMENT
-      2 kdegames-devel
-  3D
-    3 csmash armagetron
-      !HW"Riva.*128" chromium tuxracer
-
-    3 !HW"Riva.*128" !HW"Rage X[CL]" !HW"Rage Mobility (?:P\/M|L) " !HW"3D Rage (?:LT|Pro)" 
-        bzflag
-
-DEVELOPMENT
-  3 autoconf automake m4 make 
-  3 autoconf2.5
-  1 tmake pmake pmake-customs
-
-  3 libtool binutils ltrace gdb gcc
-  2 gperf cdecl cproto indent ElectricFence
-  1 egcs glibc-profile xxgdb
-
-  3 gcc-c++ libstdc++5-devel libstdc++-devel
-  2 libsigc++-examples
-  1 egcs-c++ 
-
-  3 bison flex
-  2 byacc
-
-  2 doxygen C++2LaTeX
-
-  3 jikes kaffe
-  1 gcc-java
-
-  3 cvs rcs
-  2 diffstat tkcvs
-
-  3 swig
-
-  3 python veepee tkinter
-  3 libpython2.2-devel python-devel python-imaging pygtk-glarea pygtk pygtk-libglade rpm-python
-
-  4 perl perl-Term-Readline-Gnu perl-libnet perl-libwww-perl perl-devel
-  3 perl-DBI perl-Digest-MD5 perl-IO-stringy perl-PDL perl-Parse-RecDescent 
-    perl-GTK-GLArea perl-Tk perlftlib eperl perl-URI perl-DB_File
-    perl-Data-ShowTable perl-HTML-Parser perl-HTML-SimpleParse perl-MIME-Base64
-    perl-MIME-tools perl-MP3-Info perl-MailTools perl-Msgcat
-
-  3 rpm-build
-  3 rpmlint rpm-devel
-  3 kernel-source
-
-  2 gcc-g77 nasm dev86 
-  1 gcc-objc
-
-  2 teyjus gprolog ocaml umb-scheme mawk guile clisp SmallEiffel p2c 
-    ghc ghc-prof happy haskell-GTK haskell-GTK-devel hugs98 mercury swi-prolog 
-    ruby-extensions ruby-gtk ruby 
-
-  3 gettext-devel
-
-  BOOKS
-    2 pam-doc python-docs slang-doc kernel-doc nasm-doc qt2-doc ruby-doc lkmpg
-
-  KDE
-    3 kdevelop
-    3 kdebase-devel kdegraphics-devel kdelibs-devel kdelibs-sound-devel
-      kdemultimedia-devel kdenetwork-devel
-    1 kdesupport-devel kdeaddutils-devel koffice-devel
-
-  GNOME
-    4 perl-GTK-Glade perl-GTK-Gnome 
-    3 memprof glade gnome-guile pygnome libgnomeui2_0-devel gnome-guile-devel
-      gnome-pim-devel gob 
-    2 pygnome-applet pygnome-capplet pygnome-libglade rep-gtk-gnome
-      libgnomemm-1.2_9-devel gnomemm-devel libgnome-pilot1-devel gnome-pilot-devel glademm 
-    1 gnucash-devel rep-gtk-libglade
-
-  DEVELOPMENT_OTHER
-    2 ImageMagick-devel Mesa-common-devel libXaw3d7-devel Xaw3d-devel detect-devel
-      libgd2-devel gd-devel p2c-devel libgmp3-devel gmp-devel libguile9-devel guile-devel libgr-devel libjpeg62-devel libjpeg-devel libpng3-devel libpng-devel
-      libtermcap2-devel libtermcap-devel libtiff3-devel libtiff-devel libungif4-devel libungif-devel libxml2-devel libxml-devel
-      linuxconf-devel libslang1-devel slang-devel sox-devel zlib1-devel zlib-devel XFree86-devel dev86-devel
-      libgdk-pixbuf2-devel gdk-pixbuf-devel libgimp1.2_1-devel gimp-devel libgpm1-devel gpm-devel kudzu-devel libghttp1-devel libghttp-devel libgtop2.0_0-devel libgtop-devel
-      libmikmod2-devel libmikmod-devel librep9-devel librep-devel libunicode-devel popt-devel pwdb-devel t1lib1-devel t1lib-devel
-      ucd-snmp-devel mpeg_lib-devel WindowMaker-devel aalib-devel libadns1-devel adns-devel
-      alsa-lib-devel audiofile-devel libcups1-devel cups-devel e2fsprogs-devel egcs-objc-devel
-      libg-wrap2-devel g-wrap-devel gkrellm-devel ibtk libPropList-devel licq-devel openldap-devel
-      libparted1.6-devel parted-devel pciutils-devel pilot-link-devel svgalib-devel
-      recode-devel libaspell10-devel aspell-devel cracklib-devel faces-devel fnlib-devel
-      freetype-devel libgtk+mdk0.1_6-devel gtk+mdk-devel libgtkglarea5-devel gtkglarea-devel XFree86-static-libs imap-devel
-      php-devel libpth14-devel pth-devel libsane1-devel sane-devel swig-devel xdelta-devel isapnptools-devel
-      libpango1.0_0-devel pango-devel readline-devel
-
-MONITORING
-  5 procinfo psacct
-  5 PCMCIA apmd
-  4 lsof swatch tcpdump traceroute
-  3 iplog arpwatch lslk nmap nmap-frontend procps-X11 xcpustate xsysinfo
-  2 cfengine gkrellm gps rusers mon xosview 3D xtraceroute
-  1 logcheck bonnie
-  GNOME
-    4 gnome-system-monitor
-
-FILE_TOOLS
-  5 file gnupg mkxauth mtools slocate
-  4 symlinks
-  3 dosfstools draksync mc tree
-  2 git gentoo sfm xwc FileRunner
-  1 xdelta
-
-WEBMIN
-  3 webmin
-
-WIZARDS
-  5 drakwizard
-
-CONFIG
-  4 linuxconf linuxconf-lang-cs linuxconf-lang-de linuxconf-lang-es linuxconf-lang-fi linuxconf-lang-fr linuxconf-lang-hu linuxconf-lang-it linuxconf-lang-ko linuxconf-lang-no linuxconf-lang-pt linuxconf-lang-ro linuxconf-lang-sk linuxconf-lang-sv linuxconf-lang-zh
-  4 X gnome-linuxconf
-  3 ipvsadm quota usernet nut
-  2 gfcc control-panel adjtimex isicom xinput timeconfig samba-swat
-  1 ipxutils
-
-BOOKS
-  3 mandrake_doc-de mandrake_doc-en mandrake_doc-es mandrake_doc-fr mandrake_doc-it mandrake_doc-ru
-
-X
-  5 XFree86 rxvt XFree86-75dpi-fonts urw-fonts
-  5 icewm-light
-
-  4 vim-enhanced
-  4 gurpmi rpmdrake drakconf userdrake fonts-ttf-decoratives fonts-ttf-west_european
-    mandrake-mime menudrake mandrake_desk
-    mdkonline drakfirsttime gtk-engines bootsplash
-  4 LOCALES"ja" || LOCALES"ko" || LOCALES"zh" rxvt-CJK 
-
-  3 XFree86-100dpi-fonts draksync drakprofile
-  3 USB usbview
-  2 LOCALES"ja" || LOCALES"ko" || LOCALES"zh" jmcce 
-  2 tksysv imlib-cfgeditor
-  1 DrakeLogo Mesa xtoolwait X11R6-contrib 
-
-  GNOME
-    3 gnorpm
-
-  5 xcin Chinput xa+cv xvnkb FreeWnn ami kinput2-wnn4
-
-  2 app-defaults-be app-defaults-cs app-defaults-ga app-defaults-ru app-defaults-th app-defaults-uk
-
-  5 CHARSET"iso-8859-13" fonts-type1-baltic
-    LOCALES"ru" || LOCALES"uk" XFree86-cyrillic-fonts
-    LOCALES"he" fonts-hebrew-elmar
-    LOCALES"hy" fonts-ttf-armenian
-    LOCALES"ja" fonts-ttf-japanese
-    LOCALES"ko" fonts-ttf-korean
-    LOCALES"ta" fonts-ttf-tscii fonts-bitmap-tscii
-    LOCALES"th" fonts-ttf-thai
-    LOCALES"zh_CN" || LOCALES"zh" fonts-ttf-gb2312
-    LOCALES"zh_TW" || LOCALES"zh" taipeifonts fonts-ttf-big5
-
-DOCS
-  5 man info man-pages
-
-SYSTEM
-  5 at MAKEDEV eject ldetect devfsd
-    locales iputils urpmi cpio msec tmpwatch
-
-  5 HIGH_SECURITY libsafe kernel-secure-2.4.19.16mdk kernel-secure
-  5 BIGMEM kernel-enterprise-2.4.19.16mdk kernel-enterprise
-  5 SMP kernel-smp-2.4.19.16mdk kernel-smp
-  5 PCMCIA pcmcia-cs
-  5 USB hotplug
-
-  5 HW"nForce.*(?:Audio|Network)" 
-     NVIDIA_nforce-2.4.19-16mdk
-     BIGMEM NVIDIA_nforce-2.4.19-16mdk-enterprise
-
-  4 ftp-client-krb5 gpm hexedit strace sudo grub procmail gnupg
-
-  3 bc
-  2 sndconfig kernel-utils acpid adns audiofile freeswan awesfx fbset vlan-utils
-  1 fdutils genromfs mailcap pinfo
-
-  BOOKS 
-    5 man-pages-cs man-pages-da man-pages-de man-pages-es man-pages-fr man-pages-hu man-pages-id man-pages-it man-pages-ja man-pages-ko man-pages-pl man-pages-ru man-pages-zh
-    3 grub-doc lilo-doc
-      howto-html-de howto-html-el howto-html-en howto-html-es howto-html-fr howto-html-hr howto-html-hu howto-html-id howto-html-it howto-html-ja howto-html-ko howto-html-nl howto-html-pl howto-html-ro howto-html-sl howto-html-sv howto-html-zh
-
-  4 NIS yp-tools
-  3 PCMCIA irda-utils
-  3 USB usbutils
-
-  4 LOCALES"ar" || LOCALES"fa" || LOCALES"he" || LOCALES"yi" acon
-  3 LOCALES"zh" zh-autoconvert
-
-EMULATORS
-  3 wine
-  2 BasiliskII-jit
-  1 BasiliskII
-  2 xdosemu 
-  1 xmame xmess
-
-INSTALL
-  NOCOPY
-    5 kernel-2.4.19.16mdk kernel-2.4.19.16mdk kernel kernel-smp-2.4.19.16mdk kernel-smp-2.4.19.16mdk kernel-smp kernel-enterprise-2.4.19.16mdk kernel-enterprise-2.4.19.16mdk kernel-enterprise
-      raidtools lvm reiserfsprogs jfsprogs xfsprogs 
-      alsa alsa-utils
-    4 XFree86
-
-  5 pptp-adsl dhcpcd dhcpxd dhcp-client isdn4net isdn-light isdn4k-utils ibod rp-pppoe pump wireless-tools speedtouch
-    ppp nfs-utils-clients
-    autologin ntp cups-drivers samba ncpfs hpoj ucd-snmp libptal0
-    libhpojip0 libsnmp0 xojpanel libsane-hpoj0
-    ipchains shorewall iptables printer-utils rlpr samba-client
-    xpp pdq printer-testpages nmap scli net-tools
-    cups lpr foomatic gimpprint
-    nc sndconfig 
-    ImageMagick ghostscript printer-filters mpage a2ps ppdfilt libppd1 gpr groff libgimpprint1 numlock curl
-    sane-backends sane-frontends xsane xsane-gimp mtools mtoolsfm
-    hotplug dev ypbind speedtouch_mgmt
-  4 XFree86-server XFree86-FBDev
-#  4 XFree86-SVGA XFree86-server XFree86-Mach64 XFree86-FBDev
-#    XFree86-glide-module Device3Dfx Glide_V3-DRI Glide_V5 Mesa
-#  3 XFree86-S3 XFree86-S3V XFree86-VGA16
-#  2 XFree86-8514 XFree86-AGX XFree86-I128 XFree86-Mach32 XFree86-Mach8 XFree86-Mono XFree86-P9000 XFree86-W32
-#  1 XFree86-3DLabs XFree86-Sun XFree86-SunMono XFree86-Sun24 
diff --git a/perl-install/perl2etags b/perl-install/perl2etags
deleted file mode 100755
index 6eed722c0..000000000
--- a/perl-install/perl2etags
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/usr/bin/perl -p
-
-if (/^/ ... !/^/) {
-    ($package) = /(.*).pm,/;
-    $package =~ s|/|::|g;
-}
-
-s/(\x7F)(sub\s+)?(\w+)(\([^)]*\))?/$1${package}::$3/;
diff --git a/perl-install/pixmaps/X.png b/perl-install/pixmaps/X.png
deleted file mode 100644
index 251e6d29a..000000000
--- a/perl-install/pixmaps/X.png
+++ /dev/null
diff --git a/perl-install/pixmaps/about-printerdrake.png b/perl-install/pixmaps/about-printerdrake.png
deleted file mode 100644
index ebab96dfe..000000000
--- a/perl-install/pixmaps/about-printerdrake.png
+++ /dev/null
diff --git a/perl-install/pixmaps/arrow_down.png b/perl-install/pixmaps/arrow_down.png
deleted file mode 100644
index 256dee04e..000000000
--- a/perl-install/pixmaps/arrow_down.png
+++ /dev/null
diff --git a/perl-install/pixmaps/arrow_up.png b/perl-install/pixmaps/arrow_up.png
deleted file mode 100644
index fd2408b23..000000000
--- a/perl-install/pixmaps/arrow_up.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors.png b/perl-install/pixmaps/colors.png
deleted file mode 100644
index 8de1929b4..000000000
--- a/perl-install/pixmaps/colors.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors16.png b/perl-install/pixmaps/colors16.png
deleted file mode 100644
index 9663c6140..000000000
--- a/perl-install/pixmaps/colors16.png
+++ /dev/null
diff --git a/perl-install/pixmaps/colors8.png b/perl-install/pixmaps/colors8.png
deleted file mode 100644
index 904517e2f..000000000
--- a/perl-install/pixmaps/colors8.png
+++ /dev/null
diff --git a/perl-install/pixmaps/connected.png b/perl-install/pixmaps/connected.png
deleted file mode 100755
index 3fc98ceb9..000000000
--- a/perl-install/pixmaps/connected.png
+++ /dev/null
diff --git a/perl-install/pixmaps/cups_config.png b/perl-install/pixmaps/cups_config.png
deleted file mode 100644
index a8409abd0..000000000
--- a/perl-install/pixmaps/cups_config.png
+++ /dev/null
diff --git a/perl-install/pixmaps/default.png b/perl-install/pixmaps/default.png
deleted file mode 100644
index c96abec09..000000000
--- a/perl-install/pixmaps/default.png
+++ /dev/null
diff --git a/perl-install/pixmaps/disconnected.png b/perl-install/pixmaps/disconnected.png
deleted file mode 100644
index 1c0509048..000000000
--- a/perl-install/pixmaps/disconnected.png
+++ /dev/null
diff --git a/perl-install/pixmaps/eth_card_mini.png b/perl-install/pixmaps/eth_card_mini.png
deleted file mode 100644
index 44f516168..000000000
--- a/perl-install/pixmaps/eth_card_mini.png
+++ /dev/null
diff --git a/perl-install/pixmaps/help.png b/perl-install/pixmaps/help.png
deleted file mode 100644
index aee3f0556..000000000
--- a/perl-install/pixmaps/help.png
+++ /dev/null
diff --git a/perl-install/pixmaps/ic82-systemeplus-40.png b/perl-install/pixmaps/ic82-systemeplus-40.png
deleted file mode 100644
index 35673c6a1..000000000
--- a/perl-install/pixmaps/ic82-systemeplus-40.png
+++ /dev/null
diff --git a/perl-install/pixmaps/ic82-tape-40.png b/perl-install/pixmaps/ic82-tape-40.png
deleted file mode 100644
index d42585c1b..000000000
--- a/perl-install/pixmaps/ic82-tape-40.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-af.png b/perl-install/pixmaps/langs/lang-af.png
deleted file mode 100644
index 08a6a6212..000000000
--- a/perl-install/pixmaps/langs/lang-af.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-am.png b/perl-install/pixmaps/langs/lang-am.png
deleted file mode 100644
index ee9f7ae92..000000000
--- a/perl-install/pixmaps/langs/lang-am.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ar.png b/perl-install/pixmaps/langs/lang-ar.png
deleted file mode 100644
index e4abc7176..000000000
--- a/perl-install/pixmaps/langs/lang-ar.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-as.png b/perl-install/pixmaps/langs/lang-as.png
deleted file mode 100644
index 4f4c6d640..000000000
--- a/perl-install/pixmaps/langs/lang-as.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-az.png b/perl-install/pixmaps/langs/lang-az.png
deleted file mode 100644
index 9aef0bb54..000000000
--- a/perl-install/pixmaps/langs/lang-az.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-be.png b/perl-install/pixmaps/langs/lang-be.png
deleted file mode 100644
index e9cbbbad8..000000000
--- a/perl-install/pixmaps/langs/lang-be.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ber.png b/perl-install/pixmaps/langs/lang-ber.png
deleted file mode 100644
index 758f87d27..000000000
--- a/perl-install/pixmaps/langs/lang-ber.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-bg.png b/perl-install/pixmaps/langs/lang-bg.png
deleted file mode 100644
index d815d9f5c..000000000
--- a/perl-install/pixmaps/langs/lang-bg.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-bn.png b/perl-install/pixmaps/langs/lang-bn.png
deleted file mode 100644
index 1fed9d2c4..000000000
--- a/perl-install/pixmaps/langs/lang-bn.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-br.png b/perl-install/pixmaps/langs/lang-br.png
deleted file mode 100644
index 51b8a87de..000000000
--- a/perl-install/pixmaps/langs/lang-br.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-bs.png b/perl-install/pixmaps/langs/lang-bs.png
deleted file mode 100644
index df795a31f..000000000
--- a/perl-install/pixmaps/langs/lang-bs.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ca.png b/perl-install/pixmaps/langs/lang-ca.png
deleted file mode 100644
index 8609cba11..000000000
--- a/perl-install/pixmaps/langs/lang-ca.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-chr.png b/perl-install/pixmaps/langs/lang-chr.png
deleted file mode 100644
index b93621609..000000000
--- a/perl-install/pixmaps/langs/lang-chr.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-cs.png b/perl-install/pixmaps/langs/lang-cs.png
deleted file mode 100644
index a9606348c..000000000
--- a/perl-install/pixmaps/langs/lang-cs.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-csb.png b/perl-install/pixmaps/langs/lang-csb.png
deleted file mode 100644
index 897f65a02..000000000
--- a/perl-install/pixmaps/langs/lang-csb.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-cy.png b/perl-install/pixmaps/langs/lang-cy.png
deleted file mode 100644
index b62fd955c..000000000
--- a/perl-install/pixmaps/langs/lang-cy.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-da.png b/perl-install/pixmaps/langs/lang-da.png
deleted file mode 100644
index 5e0e36fb0..000000000
--- a/perl-install/pixmaps/langs/lang-da.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-de.png b/perl-install/pixmaps/langs/lang-de.png
deleted file mode 100644
index d9bedadc0..000000000
--- a/perl-install/pixmaps/langs/lang-de.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-el.png b/perl-install/pixmaps/langs/lang-el.png
deleted file mode 100644
index 62b1bba08..000000000
--- a/perl-install/pixmaps/langs/lang-el.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-en_GB.png b/perl-install/pixmaps/langs/lang-en_GB.png
deleted file mode 100644
index 15ee5fa24..000000000
--- a/perl-install/pixmaps/langs/lang-en_GB.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-en_IE.png b/perl-install/pixmaps/langs/lang-en_IE.png
deleted file mode 100644
index fabe38773..000000000
--- a/perl-install/pixmaps/langs/lang-en_IE.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-en_US.png b/perl-install/pixmaps/langs/lang-en_US.png
deleted file mode 100644
index 974c3283e..000000000
--- a/perl-install/pixmaps/langs/lang-en_US.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-eo.png b/perl-install/pixmaps/langs/lang-eo.png
deleted file mode 100644
index 063942f3a..000000000
--- a/perl-install/pixmaps/langs/lang-eo.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-es.png b/perl-install/pixmaps/langs/lang-es.png
deleted file mode 100644
index e08d98f13..000000000
--- a/perl-install/pixmaps/langs/lang-es.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-et.png b/perl-install/pixmaps/langs/lang-et.png
deleted file mode 100644
index a93082949..000000000
--- a/perl-install/pixmaps/langs/lang-et.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-eu.png b/perl-install/pixmaps/langs/lang-eu.png
deleted file mode 100644
index 024bc1bff..000000000
--- a/perl-install/pixmaps/langs/lang-eu.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-fa.png b/perl-install/pixmaps/langs/lang-fa.png
deleted file mode 100644
index 2edc3e2c0..000000000
--- a/perl-install/pixmaps/langs/lang-fa.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-fi.png b/perl-install/pixmaps/langs/lang-fi.png
deleted file mode 100644
index 20c6b4654..000000000
--- a/perl-install/pixmaps/langs/lang-fi.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-fo.png b/perl-install/pixmaps/langs/lang-fo.png
deleted file mode 100644
index 8b3dc056e..000000000
--- a/perl-install/pixmaps/langs/lang-fo.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-fr.png b/perl-install/pixmaps/langs/lang-fr.png
deleted file mode 100644
index f871e3e5b..000000000
--- a/perl-install/pixmaps/langs/lang-fr.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-fur.png b/perl-install/pixmaps/langs/lang-fur.png
deleted file mode 100644
index 426f94c54..000000000
--- a/perl-install/pixmaps/langs/lang-fur.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-fy.png b/perl-install/pixmaps/langs/lang-fy.png
deleted file mode 100644
index 6a09f98cc..000000000
--- a/perl-install/pixmaps/langs/lang-fy.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ga.png b/perl-install/pixmaps/langs/lang-ga.png
deleted file mode 100644
index af049dab0..000000000
--- a/perl-install/pixmaps/langs/lang-ga.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-gd.png b/perl-install/pixmaps/langs/lang-gd.png
deleted file mode 100644
index 01ebf64bb..000000000
--- a/perl-install/pixmaps/langs/lang-gd.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-gl.png b/perl-install/pixmaps/langs/lang-gl.png
deleted file mode 100644
index dacb6b91b..000000000
--- a/perl-install/pixmaps/langs/lang-gl.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-gn.png b/perl-install/pixmaps/langs/lang-gn.png
deleted file mode 100644
index 93c58a779..000000000
--- a/perl-install/pixmaps/langs/lang-gn.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-gu.png b/perl-install/pixmaps/langs/lang-gu.png
deleted file mode 100644
index 10685a0fe..000000000
--- a/perl-install/pixmaps/langs/lang-gu.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-gv.png b/perl-install/pixmaps/langs/lang-gv.png
deleted file mode 100644
index 76e2c242a..000000000
--- a/perl-install/pixmaps/langs/lang-gv.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ha.png b/perl-install/pixmaps/langs/lang-ha.png
deleted file mode 100644
index e84e1b191..000000000
--- a/perl-install/pixmaps/langs/lang-ha.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-he.png b/perl-install/pixmaps/langs/lang-he.png
deleted file mode 100644
index a3a43a179..000000000
--- a/perl-install/pixmaps/langs/lang-he.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-hi.png b/perl-install/pixmaps/langs/lang-hi.png
deleted file mode 100644
index 3749905da..000000000
--- a/perl-install/pixmaps/langs/lang-hi.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-hr.png b/perl-install/pixmaps/langs/lang-hr.png
deleted file mode 100644
index 42add5cf5..000000000
--- a/perl-install/pixmaps/langs/lang-hr.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-hu.png b/perl-install/pixmaps/langs/lang-hu.png
deleted file mode 100644
index baa0be79a..000000000
--- a/perl-install/pixmaps/langs/lang-hu.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-hy.png b/perl-install/pixmaps/langs/lang-hy.png
deleted file mode 100644
index 969a0f0ec..000000000
--- a/perl-install/pixmaps/langs/lang-hy.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ia.png b/perl-install/pixmaps/langs/lang-ia.png
deleted file mode 100644
index ee4d1b2bd..000000000
--- a/perl-install/pixmaps/langs/lang-ia.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-id.png b/perl-install/pixmaps/langs/lang-id.png
deleted file mode 100644
index a31b4f3ee..000000000
--- a/perl-install/pixmaps/langs/lang-id.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ik.png b/perl-install/pixmaps/langs/lang-ik.png
deleted file mode 100644
index 1fad276d8..000000000
--- a/perl-install/pixmaps/langs/lang-ik.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-is.png b/perl-install/pixmaps/langs/lang-is.png
deleted file mode 100644
index ea7aea4d2..000000000
--- a/perl-install/pixmaps/langs/lang-is.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-it.png b/perl-install/pixmaps/langs/lang-it.png
deleted file mode 100644
index 123c65155..000000000
--- a/perl-install/pixmaps/langs/lang-it.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-iu.png b/perl-install/pixmaps/langs/lang-iu.png
deleted file mode 100644
index eef7f3184..000000000
--- a/perl-install/pixmaps/langs/lang-iu.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ja.png b/perl-install/pixmaps/langs/lang-ja.png
deleted file mode 100644
index 7c521e108..000000000
--- a/perl-install/pixmaps/langs/lang-ja.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ka.png b/perl-install/pixmaps/langs/lang-ka.png
deleted file mode 100644
index 56157f8bc..000000000
--- a/perl-install/pixmaps/langs/lang-ka.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-kk.png b/perl-install/pixmaps/langs/lang-kk.png
deleted file mode 100644
index 008c6182d..000000000
--- a/perl-install/pixmaps/langs/lang-kk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-kl.png b/perl-install/pixmaps/langs/lang-kl.png
deleted file mode 100644
index fc471261b..000000000
--- a/perl-install/pixmaps/langs/lang-kl.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-km.png b/perl-install/pixmaps/langs/lang-km.png
deleted file mode 100644
index 20836b561..000000000
--- a/perl-install/pixmaps/langs/lang-km.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-kn.png b/perl-install/pixmaps/langs/lang-kn.png
deleted file mode 100644
index 6cf704799..000000000
--- a/perl-install/pixmaps/langs/lang-kn.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ko.png b/perl-install/pixmaps/langs/lang-ko.png
deleted file mode 100644
index 8dd6c5529..000000000
--- a/perl-install/pixmaps/langs/lang-ko.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ks.png b/perl-install/pixmaps/langs/lang-ks.png
deleted file mode 100644
index edbe86c72..000000000
--- a/perl-install/pixmaps/langs/lang-ks.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ks@Arab.png b/perl-install/pixmaps/langs/lang-ks@Arab.png
deleted file mode 100644
index c3eba40ca..000000000
--- a/perl-install/pixmaps/langs/lang-ks@Arab.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ku.png b/perl-install/pixmaps/langs/lang-ku.png
deleted file mode 100644
index c776e1321..000000000
--- a/perl-install/pixmaps/langs/lang-ku.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-kw.png b/perl-install/pixmaps/langs/lang-kw.png
deleted file mode 100644
index 2e1fa3edf..000000000
--- a/perl-install/pixmaps/langs/lang-kw.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ky.png b/perl-install/pixmaps/langs/lang-ky.png
deleted file mode 100644
index 72924a206..000000000
--- a/perl-install/pixmaps/langs/lang-ky.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-lb.png b/perl-install/pixmaps/langs/lang-lb.png
deleted file mode 100644
index ba1b6c01e..000000000
--- a/perl-install/pixmaps/langs/lang-lb.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-lg.png b/perl-install/pixmaps/langs/lang-lg.png
deleted file mode 100644
index 2e67836e0..000000000
--- a/perl-install/pixmaps/langs/lang-lg.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-li.png b/perl-install/pixmaps/langs/lang-li.png
deleted file mode 100644
index 77f36a985..000000000
--- a/perl-install/pixmaps/langs/lang-li.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-lo.png b/perl-install/pixmaps/langs/lang-lo.png
deleted file mode 100644
index c8ac6c880..000000000
--- a/perl-install/pixmaps/langs/lang-lo.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-lt.png b/perl-install/pixmaps/langs/lang-lt.png
deleted file mode 100644
index 9869002a2..000000000
--- a/perl-install/pixmaps/langs/lang-lt.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ltg.png b/perl-install/pixmaps/langs/lang-ltg.png
deleted file mode 100644
index 2cd1c8227..000000000
--- a/perl-install/pixmaps/langs/lang-ltg.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-lv.png b/perl-install/pixmaps/langs/lang-lv.png
deleted file mode 100644
index b73a804bc..000000000
--- a/perl-install/pixmaps/langs/lang-lv.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-mi.png b/perl-install/pixmaps/langs/lang-mi.png
deleted file mode 100644
index 1d0658497..000000000
--- a/perl-install/pixmaps/langs/lang-mi.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-mk.png b/perl-install/pixmaps/langs/lang-mk.png
deleted file mode 100644
index ef82b87d3..000000000
--- a/perl-install/pixmaps/langs/lang-mk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ml.png b/perl-install/pixmaps/langs/lang-ml.png
deleted file mode 100644
index b1d933a1e..000000000
--- a/perl-install/pixmaps/langs/lang-ml.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-mn.png b/perl-install/pixmaps/langs/lang-mn.png
deleted file mode 100644
index 18af73e27..000000000
--- a/perl-install/pixmaps/langs/lang-mn.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-mr.png b/perl-install/pixmaps/langs/lang-mr.png
deleted file mode 100644
index 8181f89bf..000000000
--- a/perl-install/pixmaps/langs/lang-mr.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ms.png b/perl-install/pixmaps/langs/lang-ms.png
deleted file mode 100644
index 2d40e300f..000000000
--- a/perl-install/pixmaps/langs/lang-ms.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-mt.png b/perl-install/pixmaps/langs/lang-mt.png
deleted file mode 100644
index c75d1413d..000000000
--- a/perl-install/pixmaps/langs/lang-mt.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-nb.png b/perl-install/pixmaps/langs/lang-nb.png
deleted file mode 100644
index ebd4d42d3..000000000
--- a/perl-install/pixmaps/langs/lang-nb.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-nds.png b/perl-install/pixmaps/langs/lang-nds.png
deleted file mode 100644
index 39e0583c7..000000000
--- a/perl-install/pixmaps/langs/lang-nds.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ne.png b/perl-install/pixmaps/langs/lang-ne.png
deleted file mode 100644
index 695c8b8e2..000000000
--- a/perl-install/pixmaps/langs/lang-ne.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-nl.png b/perl-install/pixmaps/langs/lang-nl.png
deleted file mode 100644
index 014adbe98..000000000
--- a/perl-install/pixmaps/langs/lang-nl.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-nn.png b/perl-install/pixmaps/langs/lang-nn.png
deleted file mode 100644
index 771d08a94..000000000
--- a/perl-install/pixmaps/langs/lang-nn.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-no.png b/perl-install/pixmaps/langs/lang-no.png
deleted file mode 100644
index ebd4d42d3..000000000
--- a/perl-install/pixmaps/langs/lang-no.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-oc.png b/perl-install/pixmaps/langs/lang-oc.png
deleted file mode 100644
index f4efa6dd3..000000000
--- a/perl-install/pixmaps/langs/lang-oc.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-pa.png b/perl-install/pixmaps/langs/lang-pa.png
deleted file mode 100644
index c1945c3da..000000000
--- a/perl-install/pixmaps/langs/lang-pa.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-pa_IN.png b/perl-install/pixmaps/langs/lang-pa_IN.png
deleted file mode 100644
index c1945c3da..000000000
--- a/perl-install/pixmaps/langs/lang-pa_IN.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ph.png b/perl-install/pixmaps/langs/lang-ph.png
deleted file mode 100644
index 78a7bd614..000000000
--- a/perl-install/pixmaps/langs/lang-ph.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-pl.png b/perl-install/pixmaps/langs/lang-pl.png
deleted file mode 100644
index d525067b3..000000000
--- a/perl-install/pixmaps/langs/lang-pl.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ps.png b/perl-install/pixmaps/langs/lang-ps.png
deleted file mode 100644
index a4db7252c..000000000
--- a/perl-install/pixmaps/langs/lang-ps.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-pt.png b/perl-install/pixmaps/langs/lang-pt.png
deleted file mode 100644
index 60643675d..000000000
--- a/perl-install/pixmaps/langs/lang-pt.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-pt_BR.png b/perl-install/pixmaps/langs/lang-pt_BR.png
deleted file mode 100644
index 41c955b8e..000000000
--- a/perl-install/pixmaps/langs/lang-pt_BR.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-qu.png b/perl-install/pixmaps/langs/lang-qu.png
deleted file mode 100644
index 53e233cdb..000000000
--- a/perl-install/pixmaps/langs/lang-qu.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ro.png b/perl-install/pixmaps/langs/lang-ro.png
deleted file mode 100644
index 0483ff00a..000000000
--- a/perl-install/pixmaps/langs/lang-ro.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ru.png b/perl-install/pixmaps/langs/lang-ru.png
deleted file mode 100644
index 50bfb23d2..000000000
--- a/perl-install/pixmaps/langs/lang-ru.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sc.png b/perl-install/pixmaps/langs/lang-sc.png
deleted file mode 100644
index e4dda5f79..000000000
--- a/perl-install/pixmaps/langs/lang-sc.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-se.png b/perl-install/pixmaps/langs/lang-se.png
deleted file mode 100644
index 92b76282c..000000000
--- a/perl-install/pixmaps/langs/lang-se.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sh.png b/perl-install/pixmaps/langs/lang-sh.png
deleted file mode 100644
index 05fc8b034..000000000
--- a/perl-install/pixmaps/langs/lang-sh.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sk.png b/perl-install/pixmaps/langs/lang-sk.png
deleted file mode 100644
index 9e939c857..000000000
--- a/perl-install/pixmaps/langs/lang-sk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sl.png b/perl-install/pixmaps/langs/lang-sl.png
deleted file mode 100644
index fc5657a97..000000000
--- a/perl-install/pixmaps/langs/lang-sl.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-so.png b/perl-install/pixmaps/langs/lang-so.png
deleted file mode 100644
index b6649980a..000000000
--- a/perl-install/pixmaps/langs/lang-so.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sq.png b/perl-install/pixmaps/langs/lang-sq.png
deleted file mode 100644
index f6c2d2f0e..000000000
--- a/perl-install/pixmaps/langs/lang-sq.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sr.png b/perl-install/pixmaps/langs/lang-sr.png
deleted file mode 100644
index 5b822b402..000000000
--- a/perl-install/pixmaps/langs/lang-sr.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sr@Latn.png b/perl-install/pixmaps/langs/lang-sr@Latn.png
deleted file mode 100644
index 05fc8b034..000000000
--- a/perl-install/pixmaps/langs/lang-sr@Latn.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ss.png b/perl-install/pixmaps/langs/lang-ss.png
deleted file mode 100644
index ed1da073c..000000000
--- a/perl-install/pixmaps/langs/lang-ss.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-st.png b/perl-install/pixmaps/langs/lang-st.png
deleted file mode 100644
index 3f4c3a022..000000000
--- a/perl-install/pixmaps/langs/lang-st.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sv.png b/perl-install/pixmaps/langs/lang-sv.png
deleted file mode 100644
index 21822dbf8..000000000
--- a/perl-install/pixmaps/langs/lang-sv.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-sw.png b/perl-install/pixmaps/langs/lang-sw.png
deleted file mode 100644
index 690b07c0c..000000000
--- a/perl-install/pixmaps/langs/lang-sw.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ta.png b/perl-install/pixmaps/langs/lang-ta.png
deleted file mode 100644
index c603ea0de..000000000
--- a/perl-install/pixmaps/langs/lang-ta.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-te.png b/perl-install/pixmaps/langs/lang-te.png
deleted file mode 100644
index a263d449d..000000000
--- a/perl-install/pixmaps/langs/lang-te.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-tg.png b/perl-install/pixmaps/langs/lang-tg.png
deleted file mode 100644
index f537f85ad..000000000
--- a/perl-install/pixmaps/langs/lang-tg.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-th.png b/perl-install/pixmaps/langs/lang-th.png
deleted file mode 100644
index 75c913c73..000000000
--- a/perl-install/pixmaps/langs/lang-th.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-tk.png b/perl-install/pixmaps/langs/lang-tk.png
deleted file mode 100644
index d95c94774..000000000
--- a/perl-install/pixmaps/langs/lang-tk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-tr.png b/perl-install/pixmaps/langs/lang-tr.png
deleted file mode 100644
index a6c266603..000000000
--- a/perl-install/pixmaps/langs/lang-tr.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-tt.png b/perl-install/pixmaps/langs/lang-tt.png
deleted file mode 100644
index f643f18cd..000000000
--- a/perl-install/pixmaps/langs/lang-tt.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-tt@Cyrl.png b/perl-install/pixmaps/langs/lang-tt@Cyrl.png
deleted file mode 100644
index 5d8ab2669..000000000
--- a/perl-install/pixmaps/langs/lang-tt@Cyrl.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ug.png b/perl-install/pixmaps/langs/lang-ug.png
deleted file mode 100644
index 36033a501..000000000
--- a/perl-install/pixmaps/langs/lang-ug.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-uk.png b/perl-install/pixmaps/langs/lang-uk.png
deleted file mode 100644
index cee670ee3..000000000
--- a/perl-install/pixmaps/langs/lang-uk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ur.png b/perl-install/pixmaps/langs/lang-ur.png
deleted file mode 100644
index 0a395fd04..000000000
--- a/perl-install/pixmaps/langs/lang-ur.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-uz.png b/perl-install/pixmaps/langs/lang-uz.png
deleted file mode 100644
index d32d0ffea..000000000
--- a/perl-install/pixmaps/langs/lang-uz.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-uz@Cyrl.png b/perl-install/pixmaps/langs/lang-uz@Cyrl.png
deleted file mode 100644
index d32d0ffea..000000000
--- a/perl-install/pixmaps/langs/lang-uz@Cyrl.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-uz@Latn.png b/perl-install/pixmaps/langs/lang-uz@Latn.png
deleted file mode 100644
index e9761e7d5..000000000
--- a/perl-install/pixmaps/langs/lang-uz@Latn.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-ve.png b/perl-install/pixmaps/langs/lang-ve.png
deleted file mode 100644
index ac0233033..000000000
--- a/perl-install/pixmaps/langs/lang-ve.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-vi.png b/perl-install/pixmaps/langs/lang-vi.png
deleted file mode 100644
index eaa8fe477..000000000
--- a/perl-install/pixmaps/langs/lang-vi.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-wa.png b/perl-install/pixmaps/langs/lang-wa.png
deleted file mode 100644
index 176976de8..000000000
--- a/perl-install/pixmaps/langs/lang-wa.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-xh.png b/perl-install/pixmaps/langs/lang-xh.png
deleted file mode 100644
index d31040a18..000000000
--- a/perl-install/pixmaps/langs/lang-xh.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-yi.png b/perl-install/pixmaps/langs/lang-yi.png
deleted file mode 100644
index 729b7e166..000000000
--- a/perl-install/pixmaps/langs/lang-yi.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-zh_CN.png b/perl-install/pixmaps/langs/lang-zh_CN.png
deleted file mode 100644
index b8eff030a..000000000
--- a/perl-install/pixmaps/langs/lang-zh_CN.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-zh_TW.png b/perl-install/pixmaps/langs/lang-zh_TW.png
deleted file mode 100644
index bbfdc8fe8..000000000
--- a/perl-install/pixmaps/langs/lang-zh_TW.png
+++ /dev/null
diff --git a/perl-install/pixmaps/langs/lang-zu.png b/perl-install/pixmaps/langs/lang-zu.png
deleted file mode 100644
index b44493b50..000000000
--- a/perl-install/pixmaps/langs/lang-zu.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1024.png b/perl-install/pixmaps/monitor-1024.png
deleted file mode 100644
index 8dee9c29c..000000000
--- a/perl-install/pixmaps/monitor-1024.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1152.png b/perl-install/pixmaps/monitor-1152.png
deleted file mode 100644
index 95380098b..000000000
--- a/perl-install/pixmaps/monitor-1152.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1280.png b/perl-install/pixmaps/monitor-1280.png
deleted file mode 100644
index 24bdf631b..000000000
--- a/perl-install/pixmaps/monitor-1280.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1400.png b/perl-install/pixmaps/monitor-1400.png
deleted file mode 100644
index 6b6cd8dfc..000000000
--- a/perl-install/pixmaps/monitor-1400.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1600.png b/perl-install/pixmaps/monitor-1600.png
deleted file mode 100644
index 3016b0590..000000000
--- a/perl-install/pixmaps/monitor-1600.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-1920.png b/perl-install/pixmaps/monitor-1920.png
deleted file mode 100644
index 844d378c4..000000000
--- a/perl-install/pixmaps/monitor-1920.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-2048.png b/perl-install/pixmaps/monitor-2048.png
deleted file mode 100644
index eb208663c..000000000
--- a/perl-install/pixmaps/monitor-2048.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-640.png b/perl-install/pixmaps/monitor-640.png
deleted file mode 100644
index 5ee916c84..000000000
--- a/perl-install/pixmaps/monitor-640.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor-800.png b/perl-install/pixmaps/monitor-800.png
deleted file mode 100644
index dc2e3a915..000000000
--- a/perl-install/pixmaps/monitor-800.png
+++ /dev/null
diff --git a/perl-install/pixmaps/monitor.png b/perl-install/pixmaps/monitor.png
deleted file mode 100644
index 097c022bd..000000000
--- a/perl-install/pixmaps/monitor.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_2b.png b/perl-install/pixmaps/mouse_2b.png
deleted file mode 100644
index 5df9cf38a..000000000
--- a/perl-install/pixmaps/mouse_2b.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_2b_left.png b/perl-install/pixmaps/mouse_2b_left.png
deleted file mode 100644
index 9844cbc3e..000000000
--- a/perl-install/pixmaps/mouse_2b_left.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_2b_right.png b/perl-install/pixmaps/mouse_2b_right.png
deleted file mode 100644
index d1bea0424..000000000
--- a/perl-install/pixmaps/mouse_2b_right.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b+.png b/perl-install/pixmaps/mouse_3b+.png
deleted file mode 100644
index 964ba5c15..000000000
--- a/perl-install/pixmaps/mouse_3b+.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b+_middle.png b/perl-install/pixmaps/mouse_3b+_middle.png
deleted file mode 100644
index 7b7547318..000000000
--- a/perl-install/pixmaps/mouse_3b+_middle.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b.png b/perl-install/pixmaps/mouse_3b.png
deleted file mode 100644
index c2a9585ba..000000000
--- a/perl-install/pixmaps/mouse_3b.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b_left.png b/perl-install/pixmaps/mouse_3b_left.png
deleted file mode 100644
index 4115a3f8c..000000000
--- a/perl-install/pixmaps/mouse_3b_left.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b_middle.png b/perl-install/pixmaps/mouse_3b_middle.png
deleted file mode 100644
index c2c99f1f7..000000000
--- a/perl-install/pixmaps/mouse_3b_middle.png
+++ /dev/null
diff --git a/perl-install/pixmaps/mouse_3b_right.png b/perl-install/pixmaps/mouse_3b_right.png
deleted file mode 100644
index f7a04d530..000000000
--- a/perl-install/pixmaps/mouse_3b_right.png
+++ /dev/null
diff --git a/perl-install/pixmaps/nosplash_thumb.png b/perl-install/pixmaps/nosplash_thumb.png
deleted file mode 100644
index 9fb25693d..000000000
--- a/perl-install/pixmaps/nosplash_thumb.png
+++ /dev/null
diff --git a/perl-install/pixmaps/printer-mdk.png b/perl-install/pixmaps/printer-mdk.png
deleted file mode 100644
index 9399efd02..000000000
--- a/perl-install/pixmaps/printer-mdk.png
+++ /dev/null
diff --git a/perl-install/pixmaps/printer_add.png b/perl-install/pixmaps/printer_add.png
deleted file mode 100644
index c221193e0..000000000
--- a/perl-install/pixmaps/printer_add.png
+++ /dev/null
diff --git a/perl-install/pixmaps/printer_conf.png b/perl-install/pixmaps/printer_conf.png
deleted file mode 100644
index f07042b28..000000000
--- a/perl-install/pixmaps/printer_conf.png
+++ /dev/null
diff --git a/perl-install/pixmaps/printer_default.png b/perl-install/pixmaps/printer_default.png
deleted file mode 100644
index 9c732f7f6..000000000
--- a/perl-install/pixmaps/printer_default.png
+++ /dev/null
diff --git a/perl-install/pixmaps/printer_del.png b/perl-install/pixmaps/printer_del.png
deleted file mode 100644
index d80786d50..000000000
--- a/perl-install/pixmaps/printer_del.png
+++ /dev/null
diff --git a/perl-install/pixmaps/printerdrake.png b/perl-install/pixmaps/printerdrake.png
deleted file mode 100644
index 87c198972..000000000
--- a/perl-install/pixmaps/printerdrake.png
+++ /dev/null
diff --git a/perl-install/pixmaps/quit.png b/perl-install/pixmaps/quit.png
deleted file mode 100644
index 7e4e1e1d5..000000000
--- a/perl-install/pixmaps/quit.png
+++ /dev/null
diff --git a/perl-install/pixmaps/redhat-config-users.png b/perl-install/pixmaps/redhat-config-users.png
deleted file mode 100644
index 09d075da5..000000000
--- a/perl-install/pixmaps/redhat-config-users.png
+++ /dev/null
diff --git a/perl-install/pixmaps/refresh.png b/perl-install/pixmaps/refresh.png
deleted file mode 100644
index d34b58088..000000000
--- a/perl-install/pixmaps/refresh.png
+++ /dev/null
diff --git a/perl-install/pixmaps/selected.png b/perl-install/pixmaps/selected.png
deleted file mode 100644
index 49b225b93..000000000
--- a/perl-install/pixmaps/selected.png
+++ /dev/null
diff --git a/perl-install/pixmaps/slpash-drakeprint-2.png b/perl-install/pixmaps/slpash-drakeprint-2.png
deleted file mode 100644
index ebab96dfe..000000000
--- a/perl-install/pixmaps/slpash-drakeprint-2.png
+++ /dev/null
diff --git a/perl-install/pixmaps/steps_off.png b/perl-install/pixmaps/steps_off.png
deleted file mode 100644
index 66d4235a9..000000000
--- a/perl-install/pixmaps/steps_off.png
+++ /dev/null
diff --git a/perl-install/pixmaps/steps_on.png b/perl-install/pixmaps/steps_on.png
deleted file mode 100644
index 21872e396..000000000
--- a/perl-install/pixmaps/steps_on.png
+++ /dev/null
diff --git a/perl-install/pixmaps/stock_cancel.xpm b/perl-install/pixmaps/stock_cancel.xpm
deleted file mode 100644
index 75466c7a6..000000000
--- a/perl-install/pixmaps/stock_cancel.xpm
+++ /dev/null
@@ -1,93 +0,0 @@
-/* XPM */
-static char * stock_cancel_xpm[] = {
-"24 24 66 1",
-" 	c None",
-".	c #000000",
-"+	c #010101",
-"@	c #040404",
-"#	c #DD8D7D",
-"$	c #D05F49",
-"%	c #C16E5E",
-"&	c #AD4632",
-"*	c #080403",
-"=	c #D3634E",
-"-	c #C95641",
-";	c #C64D37",
-">	c #D9705B",
-",	c #C24129",
-"'	c #962E1C",
-")	c #100401",
-"!	c #C34C36",
-"~	c #C03B22",
-"{	c #BF3B22",
-"]	c #C44D36",
-"^	c #D66F5B",
-"/	c #B93B24",
-"(	c #922C1B",
-"_	c #BE3B22",
-":	c #CA6D5B",
-"<	c #B83E27",
-"[	c #822617",
-"}	c #BD3B22",
-"|	c #BC3B22",
-"1	c #B23821",
-"2	c #B06354",
-"3	c #C2462F",
-"4	c #822618",
-"5	c #BB3B22",
-"6	c #BA3B22",
-"7	c #B73922",
-"8	c #B45B4A",
-"9	c #CE523A",
-"0	c #992F1D",
-"a	c #BA3A22",
-"b	c #C84E37",
-"c	c #B63922",
-"d	c #CE6653",
-"e	c #BD3C24",
-"f	c #D17F70",
-"g	c #BE3F27",
-"h	c #B63D26",
-"i	c #B43922",
-"j	c #CB7868",
-"k	c #BD3F28",
-"l	c #922F1E",
-"m	c #C24D36",
-"n	c #B03720",
-"o	c #96311E",
-"p	c #B43A23",
-"q	c #CC7261",
-"r	c #B93A22",
-"s	c #A23A26",
-"t	c #CD7261",
-"u	c #BD3D25",
-"v	c #98311E",
-"w	c #C23B22",
-"x	c #AD3620",
-"y	c #912F1E",
-"z	c #94301E",
-"A	c #A13521",
-"                        ",
-"                        ",
-"                        ",
-"                        ",
-"     ..          +@     ",
-"    .#$.        .%&*    ",
-"    .=-;.      .>,')    ",
-"    .!~{].    .^/(.     ",
-"     .!__!.  .:<[.      ",
-"      .!}|1..234.       ",
-"       .!567890.        ",
-"        .!aabc.         ",
-"         .deaa1.        ",
-"        .fgh765i.       ",
-"       .jkl..m|}n.      ",
-"      .j/o.  .!__p.     ",
-"     .qr'.    .]{~s.    ",
-"    .tuv.      .;wx.    ",
-"    .yz.        .bA.    ",
-"     ..          ..     ",
-"                        ",
-"                        ",
-"                        ",
-"                        "};
diff --git a/perl-install/pixmaps/stock_exit.xpm b/perl-install/pixmaps/stock_exit.xpm
deleted file mode 100644
index 7f9daf14b..000000000
--- a/perl-install/pixmaps/stock_exit.xpm
+++ /dev/null
@@ -1,167 +0,0 @@
-/* XPM */
-static char * stock_exit_xpm[] = {
-"24 24 140 2",
-"  	c None",
-". 	c #000000",
-"+ 	c #D6D6D4",
-"@ 	c #BDBDBC",
-"# 	c #A8A8A4",
-"$ 	c #92928F",
-"% 	c #727370",
-"& 	c #61615E",
-"* 	c #20201F",
-"= 	c #F1F1EF",
-"- 	c #E6E6E4",
-"; 	c #DADAD7",
-"> 	c #CFCFCD",
-", 	c #C4C4C1",
-"' 	c #A8A8A5",
-") 	c #767674",
-"! 	c #777774",
-"~ 	c #1E1E1D",
-"{ 	c #B9B9B7",
-"] 	c #AEAEAC",
-"^ 	c #8F8F8D",
-"/ 	c #262626",
-"( 	c #414140",
-"_ 	c #E9836C",
-": 	c #DEDEDC",
-"< 	c #C5C5C2",
-"[ 	c #636362",
-"} 	c #040504",
-"| 	c #040604",
-"1 	c #050705",
-"2 	c #E87B62",
-"3 	c #E67056",
-"4 	c #D5D5D3",
-"5 	c #DBDBD8",
-"6 	c #D0D0CE",
-"7 	c #080A07",
-"8 	c #0A0C09",
-"9 	c #0A0D09",
-"0 	c #0B0E0A",
-"a 	c #F0B0A1",
-"b 	c #EB8D77",
-"c 	c #DF421E",
-"d 	c #E97E66",
-"e 	c #CBCBC8",
-"f 	c #0C0F0B",
-"g 	c #0F130D",
-"h 	c #10140E",
-"i 	c #11150F",
-"j 	c #EFA392",
-"k 	c #BFBFBD",
-"l 	c #5D5D5C",
-"m 	c #10150F",
-"n 	c #141912",
-"o 	c #161C14",
-"p 	c #171D15",
-"q 	c #B7B7B4",
-"r 	c #0C0C0C",
-"s 	c #192017",
-"t 	c #1C2319",
-"u 	c #1D241A",
-"v 	c #CD8484",
-"w 	c #990000",
-"x 	c #701616",
-"y 	c #A6A6A5",
-"z 	c #181E16",
-"A 	c #1E261B",
-"B 	c #212A1E",
-"C 	c #222B1F",
-"D 	c #4F0000",
-"E 	c #AEAEAB",
-"F 	c #1D261B",
-"G 	c #242E21",
-"H 	c #273224",
-"I 	c #283325",
-"J 	c #580000",
-"K 	c #B5B5B3",
-"L 	c #293426",
-"M 	c #2D3929",
-"N 	c #2E3A2A",
-"O 	c #7C4343",
-"P 	c #6A0000",
-"Q 	c #720000",
-"R 	c #BDBDBB",
-"S 	c #232C20",
-"T 	c #2A3526",
-"U 	c #303C2B",
-"V 	c #33402E",
-"W 	c #C5C5C3",
-"X 	c #1E261C",
-"Y 	c #303D2C",
-"Z 	c #374532",
-"` 	c #394834",
-" .	c #500000",
-"..	c #CDCDCB",
-"+.	c #1B2319",
-"@.	c #253022",
-"#.	c #303E2D",
-"$.	c #394934",
-"%.	c #3D4E38",
-"&.	c #9D9D9B",
-"*.	c #565655",
-"=.	c #2C3828",
-"-.	c #40503A",
-";.	c #43553E",
-">.	c #BABAB7",
-",.	c #777776",
-"'.	c #323830",
-").	c #232C1F",
-"!.	c #313E2D",
-"~.	c #3B4A36",
-"{.	c #43553D",
-"].	c #485B42",
-"^.	c #4A5E44",
-"/.	c #F0F0EE",
-"(.	c #E5E5E3",
-"_.	c #C6C6C3",
-":.	c #ACACAB",
-"<.	c #8B8B8A",
-"[.	c #32392F",
-"}.	c #2C3728",
-"|.	c #3F503A",
-"1.	c #465840",
-"2.	c #4B5E44",
-"3.	c #4E6347",
-"4.	c #506549",
-"5.	c #DADAD8",
-"6.	c #7A7D78",
-"7.	c #333C30",
-"8.	c #475A41",
-"9.	c #4F6348",
-"0.	c #53694C",
-"a.	c #566C4E",
-"b.	c #576D4F",
-"c.	c #91968F",
-"d.	c #3B4736",
-"e.	c #42543C",
-"f.	c #51674A",
-"g.	c #586F50",
-"h.	c #5B7353",
-"i.	c #5C7454",
-"                                                ",
-"              . . . . . . . . . . . . . . . .   ",
-"              . + @ # $ % & & & * . . . . . .   ",
-"              . = - ; > , ' ) ! ~ . . . . . .   ",
-"          .   . = - ; > , { ] ^ / . . . . . .   ",
-"          . . . = - ; > , { { { ( . . . . . .   ",
-"          . _ . : - ; > < { { { [ } | 1 1 1 .   ",
-". . . . . . 2 3 . 4 5 6 < { { { [ 7 8 9 0 0 .   ",
-". a 2 2 2 2 b c d . e 6 < { { { [ f g h i i .   ",
-". j c c c c c c c 3 . k < { l { [ m n o p p .   ",
-". j c c c c c c c c 3 . q { l r [ n s t u u .   ",
-". v w w w w w w w w w x . y r { [ z A B C C .   ",
-". v w w w w w w w w D . E { { { [ F G H I I .   ",
-". v w w w w w w w J . K < { { { [ C L M N N .   ",
-". O P P P P Q w J . R 6 < { { { [ S T U V V .   ",
-". . . . . . Q J . W 5 6 < { { { [ X H Y Z ` .   ",
-"          .  .. ..- 5 6 < { { { [ +.@.#.$.%..   ",
-"          . . . = - 5 6 < { ] &.*.B =.Z -.;..   ",
-"          .   . = - 5 6 >.&.,.'.).!.~.{.].^..   ",
-"              . /.(._.:.<.[.}.Z |.1.2.3.4.4..   ",
-"              . 5.k 6.7.Z -.8.9.0.a.a.b.b.b..   ",
-"              . c.d.e.^.f.g.h.i.i.i.i.i.i.i..   ",
-"              . . . . . . . . . . . . . . . .   ",
-"                                                "};
diff --git a/perl-install/pixmaps/stock_left.xpm b/perl-install/pixmaps/stock_left.xpm
deleted file mode 100644
index 0cc2c6fd2..000000000
--- a/perl-install/pixmaps/stock_left.xpm
+++ /dev/null
@@ -1,70 +0,0 @@
-/* XPM */
-static char * stock_left_xpm[] = {
-"24 24 43 1",
-" 	c None",
-".	c #000000",
-"+	c #B9D0B9",
-"@	c #CDDECB",
-"#	c #B6C7B6",
-"$	c #B1C9B0",
-"%	c #B3C4B3",
-"&	c #B4CBB2",
-"*	c #B5CEB5",
-"=	c #B7CCB5",
-"-	c #B9CEB7",
-";	c #BAD1BA",
-">	c #BBCFBA",
-",	c #BBD0B9",
-"'	c #B2C9B0",
-")	c #7EAB78",
-"!	c #AAC7A8",
-"~	c #B3CAB1",
-"{	c #B0C9B0",
-"]	c #B0C9AE",
-"^	c #AEC7AC",
-"/	c #AAC5A8",
-"(	c #A9C4A7",
-"_	c #698267",
-":	c #2D2D2D",
-"<	c #CFDFCC",
-"[	c #ADC8AB",
-"}	c #B0C7AE",
-"|	c #ADC6AB",
-"1	c #678C63",
-"2	c #9BAD9A",
-"3	c #85AE81",
-"4	c #87AF84",
-"5	c #87B083",
-"6	c #88AF84",
-"7	c #88B085",
-"8	c #86AF82",
-"9	c #547150",
-"0	c #3C5235",
-"a	c #5B7950",
-"b	c #4A6342",
-"c	c #3B5035",
-"d	c #415639",
-"                        ",
-"                        ",
-"                        ",
-"            .           ",
-"           ..           ",
-"          .+.           ",
-"         .@#.           ",
-"        .@$%........    ",
-"       .@&*=-;->,').    ",
-"      .@!~{]^///^(_.    ",
-"     :<[}||[!^^}^[1.    ",
-"    .23444445645789.    ",
-"     .0aaaaaaaaaaab.    ",
-"      .0aaaaaaaaaab.    ",
-"       .0aabccccccd.    ",
-"        .0ab........    ",
-"         .0b.           ",
-"          .b.           ",
-"           ..           ",
-"            .           ",
-"                        ",
-"                        ",
-"                        ",
-"                        "};
diff --git a/perl-install/pixmaps/stock_ok.xpm b/perl-install/pixmaps/stock_ok.xpm
deleted file mode 100644
index e7f50776d..000000000
--- a/perl-install/pixmaps/stock_ok.xpm
+++ /dev/null
@@ -1,77 +0,0 @@
-/* XPM */
-static char * stock_ok_xpm[] = {
-"24 24 50 1",
-" 	c None",
-".	c #000000",
-"+	c #86A6C2",
-"@	c #86A8B7",
-"#	c #97B3CE",
-"$	c #477198",
-"%	c #779DC0",
-"&	c #8FAECA",
-"*	c #779DBF",
-"=	c #C1D2E2",
-"-	c #32516D",
-";	c #A9C0D6",
-">	c #628DB5",
-",	c #A4BDD5",
-"'	c #355674",
-")	c #D7E2EC",
-"!	c #A3BCD4",
-"~	c #5987B2",
-"{	c #5886B1",
-"]	c #B2C7DB",
-"^	c #8BABC9",
-"/	c #7299BD",
-"(	c #3C6081",
-"_	c #7A9FC1",
-":	c #769CBF",
-"<	c #5483AF",
-"[	c #1C2D3D",
-"}	c #638EB6",
-"|	c #ADC3D8",
-"1	c #42698D",
-"2	c #48739B",
-"3	c #6690B7",
-"4	c #7DA1C2",
-"5	c #BACDDF",
-"6	c #8CACC9",
-"7	c #4E7DA9",
-"8	c #263C51",
-"9	c #5D8AB4",
-"0	c #5785B0",
-"a	c #5584B0",
-"b	c #4F7EAA",
-"c	c #426A8F",
-"d	c #4C79A3",
-"e	c #49749C",
-"f	c #294158",
-"g	c #406689",
-"h	c #47729A",
-"i	c #3D6284",
-"j	c #33526E",
-"k	c #1B2B3A",
-"                        ",
-"                        ",
-"                        ",
-"                  ..    ",
-"                 .+@.   ",
-"                 .#$.   ",
-"                .%&.    ",
-"                .#$.    ",
-"               .*&.     ",
-"               .=-.     ",
-"              .;>.      ",
-"      .       .,'.      ",
-"     .).     .!~.       ",
-"     .{].   .^/(.       ",
-"      ._:.  .]<[.       ",
-"       .%}..|}1.        ",
-"       .2345678.        ",
-"        .90abc.         ",
-"         .bdef.         ",
-"         .ghi.          ",
-"          .jk.          ",
-"           ..           ",
-"                        ",
-"                        "};
diff --git a/perl-install/pixmaps/stock_right.xpm b/perl-install/pixmaps/stock_right.xpm
deleted file mode 100644
index a683dd8dc..000000000
--- a/perl-install/pixmaps/stock_right.xpm
+++ /dev/null
@@ -1,68 +0,0 @@
-/* XPM */
-static char * stock_right_xpm[] = {
-"24 24 41 1",
-" 	c None",
-".	c #000000",
-"+	c #8CA782",
-"@	c #B1CDAE",
-"#	c #77A16E",
-"$	c #B4CEB1",
-"%	c #ACC8A9",
-"&	c #709867",
-"*	c #C1D6BD",
-"=	c #BDD3B8",
-"-	c #BFD4BB",
-";	c #C2D7BE",
-">	c #B0CAAD",
-",	c #B2CBB0",
-"'	c #AAC7A8",
-")	c #0F1308",
-"!	c #AEC5A8",
-"~	c #AEC8AD",
-"{	c #ABC7A8",
-"]	c #AAC6A7",
-"^	c #A8C6A5",
-"/	c #ADC8AD",
-"(	c #A8C7A8",
-"_	c #A5C4A3",
-":	c #7F9F76",
-"<	c #A6BFA0",
-"[	c #ABC7AA",
-"}	c #A7C5A4",
-"|	c #A9C7A6",
-"1	c #AFC8AD",
-"2	c #A4C3A2",
-"3	c #6B9060",
-"4	c #778E6F",
-"5	c #698D60",
-"6	c #6B9063",
-"7	c #445B2C",
-"8	c #6B8661",
-"9	c #5B7950",
-"0	c #6C8562",
-"a	c #65815C",
-"b	c #506B46",
-"                        ",
-"                        ",
-"                        ",
-"           .            ",
-"           ..           ",
-"           .+.          ",
-"           .@#.         ",
-"    ........$%&.        ",
-"    .*=-;;;;>,'&)       ",
-"    .!~{{{]^'/(_:.      ",
-"    .<[^}^|{%'{123.     ",
-"    .45666666666657.    ",
-"    .8999999999997.     ",
-"    .099999999997.      ",
-"    .abbbbbb9997.       ",
-"    ........b97.        ",
-"           .b7.         ",
-"           .7.          ",
-"           ..           ",
-"           .            ",
-"                        ",
-"                        ",
-"                        ",
-"                        "};
diff --git a/perl-install/pixmaps/unselected.png b/perl-install/pixmaps/unselected.png
deleted file mode 100644
index 689a4eb01..000000000
--- a/perl-install/pixmaps/unselected.png
+++ /dev/null
diff --git a/perl-install/pixmaps/warning.png b/perl-install/pixmaps/warning.png
deleted file mode 100644
index c2da47819..000000000
--- a/perl-install/pixmaps/warning.png
+++ /dev/null
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
deleted file mode 100644
index 8106be9e5..000000000
--- a/perl-install/pkgs.pm
+++ /dev/null
@@ -1,1460 +0,0 @@
-package pkgs; # $Id$
-
-use strict;
-
-use MDK::Common::System;
-use URPM;
-use URPM::Resolve;
-use URPM::Signature;
-use common;
-use install_any;
-use run_program;
-use detect_devices;
-use log;
-use fs;
-use loopback;
-use c;
-
-
-our %preferred = map { $_ => undef } qw(lilo perl-base gstreamer-oss openjade ctags glibc curl sane-backends postfix mdkkdm gcc gcc-cpp gcc-c++ proftpd ghostscript-X vim-minimal kernel db1 db2 libxpm4 zlib1 libncurses5 harddrake cups apache);
-
-#- lower bound on the left ( aka 90 means [90-100[ )
-our %compssListDesc = (
-   5 => N_("must have"),
-   4 => N_("important"),
-   3 => N_("very nice"),
-   2 => N_("nice"),
-   1 => N_("maybe"),
-);
-
-#- constant for small transaction.
-our $limitMinTrans = 13;
-
-
-#- package to ignore, typically in Application CD. OBSOLETED ?
-my %ignoreBadPkg = (
-		    'civctp-demo'   => 1,
-		    'eus-demo'      => 1,
-		    'myth2-demo'    => 1,
-		    'heretic2-demo' => 1,
-		    'heroes3-demo'  => 1,
-		    'rt2-demo'      => 1,
-		   );
-
-sub packageMedium {
-   my ($packages, $p) = @_; $p or die "invalid package from\n" . backtrace();
-   foreach (values %{$packages->{mediums}}) {
-       defined $_->{start} && defined $_->{end} or next;
-       $p->id >= $_->{start} && $p->id <= $_->{end} and return $_;
-   }
-   return {};
-}
-
-sub cleanHeaders() {
-    rm_rf("$::prefix/tmp/headers") if -e "$::prefix/tmp/headers";
-}
-
-#- get all headers from an hdlist file.
-sub extractHeaders {
-    my ($pkgs, $media) = @_;
-    my %medium2pkgs;
-
-    cleanHeaders();
-
-    foreach (@$pkgs) {
-	foreach my $medium (values %$media) {
-	    $_->id >= $medium->{start} && $_->id <= $medium->{end} or next;
-	    push @{$medium2pkgs{$medium->{medium}} ||= []}, $_;
-	}
-    }
-
-    foreach (keys %medium2pkgs) {
-	my $medium = $media->{$_};
-
-	eval {
-	    require packdrake;
-	    my $packer = new packdrake("/tmp/$medium->{hdlist}", quiet => 1);
-	    $packer->extract_archive("$::prefix/tmp/headers", map { $_->header_filename } @{$medium2pkgs{$_}});
-	};
-    }
-
-    foreach (@$pkgs) {
-	my $f = "$::prefix/tmp/headers/" . $_->header_filename;
-	$_->update_header($f) or log::l("unable to open header file $f"), next;
-	log::l("read header file $f");
-    }
-}
-
-sub isSupplCDMedium($) {
-    my ($medium) = @_;
-    $medium->{method} eq 'cdrom' && $medium->{medium} =~ /^\d+s$/;
-}
-
-#- TODO BEFORE TODO
-#- size and correction size functions for packages.
-my $B = 1.20873;
-my $C = 4.98663; #- does not take hdlist's into account as getAvailableSpace will do it.
-sub correctSize { $B * $_[0] + $C }
-sub invCorrectSize { ($_[0] - $C) / $B }
-
-sub selectedSize {
-    my ($packages) = @_;
-    my $size = 0;
-    my %skip;
-    #- take care of packages selected...
-    foreach (@{$packages->{depslist}}) {
-	if ($_->flag_selected) {
-	    $size += $_->size;
-	    #- if a package is obsoleted with the same name it should
-	    #- have been selected, so a selected new package obsoletes
-	    #- all the old package.
-	    exists $skip{$_->name} and next; $skip{$_->name} = undef;
-	    $size -= $packages->{sizes}{$_->name};
-	}
-    }
-    #- but remove size of package being obsoleted or removed.
-    foreach (keys %{$packages->{state}{rejected}}) {
-	my ($name) = /(.*)-[^\-]*-[^\-]*$/ or next;
-	exists $skip{$name} and next; $skip{$name} = undef;
-	$size -= $packages->{sizes}{$name};
-    }
-    $size;
-}
-sub correctedSelectedSize { correctSize(selectedSize($_[0]) / sqr(1024)) }
-
-sub size2time {
-    my ($x, $max) = @_;
-    my $A = 7e-07;
-    my $limit = min($max * 3 / 4, 9e8);
-    if ($x < $limit) {
-	$A * $x;
-    } else { 
-	$x -= $limit;
-	my $B = 6e-16;
-	my $C = 15e-07;
-	$B * $x ** 2 + $C * $x + $A * $limit;
-    }
-}
-
-
-sub packagesProviding {
-    my ($packages, $name) = @_;
-    map { $packages->{depslist}[$_] } keys %{$packages->{provides}{$name} || {}};
-}
-
-#- searching and grouping methods.
-#- package is a reference to list that contains
-#- a hash to search by name and
-#- a list to search by id.
-sub packageByName {
-    my ($packages, $name) = @_;
-    #- search package with given name and compatible with current architecture.
-    #- take the best one found (most up-to-date).
-    my @packages;
-    foreach my $pkg (packagesProviding($packages, $name)) {
-	$pkg->is_arch_compat or next;
-	$pkg->name eq $name or next;
-	push @packages, $pkg;
-    }
-    my $best;
-    foreach (@packages) {
-	if ($best && $best != $_) {
-	    $_->compare_pkg($best) > 0 and $best = $_;
-	} else {
-	    $best = $_;
-	}
-    }
-    $best or log::l("unknown package `$name'");
-    $best;
-}
-sub packageById {
-    my ($packages, $id) = @_;
-    my $pkg = $packages->{depslist}[$id]; #- do not log as id unsupported are still in depslist.
-    $pkg->is_arch_compat && $pkg;
-}
-
-sub analyse_kernel_name {
-    my $kernels = join('|', map { "-$_" }
-	'(p3|i586|i686)-(up|smp)-(1GB|4GB|64GB)', 
-	qw(enterprise secure smp multimedia multimedia-smp xbox),
-    );
-    my @l = $_[0] =~ /kernel[^\-]*($kernels)?(-([^\-]+))?$/ or return;
-    $l[0], $l[-1];
-}
-
-sub packages2kernels {
-    my ($packages) = @_;
-
-    map { 
-	if (my ($ext, $version) = analyse_kernel_name($_->name)) {
-	    { pkg => $_, ext => $ext, version => $version };
-	} else {
-	    log::l("ERROR: unknown package " . $_->name . " providing kernel");
-	    ();
-	}
-    } packagesProviding($packages, 'kernel');
-}
-
-sub bestKernelPackage {
-    my ($packages) = @_;
-
-    my @kernels = packages2kernels($packages) or internal_error('no kernel available');
-    my ($version_BOOT) = c::kernel_version() =~ /^(\d+\.\d+)/;
-    if (my @l = grep { $_->{version} =~ /\Q$version_BOOT/ } @kernels) {
-	#- favour versions corresponding to current BOOT version
-	@kernels = @l;
-    }
-    my @prefered_exts = 
-      is_xbox() ? '-xbox' :
-      detect_devices::is_i586() ? '-i586-up-1GB' :
-      !detect_devices::has_cpu_flag('pae') ? ('-i686-up-4GB', '-i586-up-1GB') :
-      detect_devices::hasSMP() ? '-smp' : 
-      '';
-    foreach my $prefered_ext (@prefered_exts, '') {
-	if (my @l = grep { $_->{ext} eq $prefered_ext } @kernels) {
-	    @kernels = @l;
-	}
-    }
-    
-    log::l("bestKernelPackage (" . join(':', @prefered_exts) . "): " . join(' ', map { $_->{pkg}->name } @kernels) . (@kernels > 1 ? ' (choosing the first)' : ''));
-    $preferred{'kernel-source-' . $kernels[0]{version}} = undef;
-    $kernels[0]{pkg};
-}
-
-sub packagesOfMedium {
-    my ($packages, $medium) = @_;
-    defined $medium->{start} && defined $medium->{end} ? @{$packages->{depslist}}[$medium->{start} .. $medium->{end}] : ();
-}
-sub packagesToInstall {
-    my ($packages) = @_;
-    my @packages;
-    foreach (values %{$packages->{mediums}}) {
-	$_->{selected} or next;
-	log::l("examining packagesToInstall of medium $_->{descr}");
-	push @packages, grep { $_->flag_selected } packagesOfMedium($packages, $_);
-    }
-    log::l("found " . scalar(@packages) . " packages to install");
-    @packages;
-}
-
-sub allMediums {
-    my ($packages) = @_;
-    sort {
-	#- put supplementary media at the end
-	my @x = ($a, $b);
-	foreach (@x) { /(\d+)s/ and $_ = 100 + $1 }
-	$x[0] <=> $x[1];
-    } keys %{$packages->{mediums}};
-}
-
-sub mediumDescr {
-    my ($packages, $medium_name) = @_;
-    $packages->{mediums}{$medium_name}{descr};
-}
-
-sub packageRequest {
-    my ($packages, $pkg) = @_;
-
-    #- check if the same or better version is installed,
-    #- do not select in such case.
-    $pkg && ($pkg->flag_upgrade || !$pkg->flag_installed) or return;
-
-    #- check for medium selection, if the medium has not been
-    #- selected, the package cannot be selected.
-    foreach (values %{$packages->{mediums}}) {
-	!$_->{selected} && $pkg->id >= $_->{start} && $pkg->id <= $_->{end} and return;
-    }
-
-    return { $pkg->id => 1 };
-}
-
-sub packageCallbackChoices {
-    my ($urpm, $_db, $state, $choices) = @_;
-    if (my $prefer = find { $_->arch ne 'src' && exists $preferred{$_->name} } @$choices) {
-	$prefer;
-    } else {
-	my @l = grep {
-	    #- or even if a package requires a specific locales which
-	    #- is already selected.
-	    find {
-		/locales-/ && do {
-		    my $p = packageByName($urpm, $_);
-		    $p && $p->flag_available;
-		};
-	    } $_->requires_nosense;
-	} @$choices;
-	if (!@l) {
-	    push @l, $choices->[0];
-	    log::l("packageCallbackChoices: default choice from ", join(",", map { $urpm->{depslist}[$_]->name } keys %{$state->{selected}}), " in ", join(",", map { $_->name } @$choices));
-	}
-	#-log::l("packageCallbackChoices: chosen " . join(" ", map { $_->name } @l));
-	@l;
-    }
-}
-
-#- selection, unselection of package.
-sub selectPackage {
-    my ($packages, $pkg, $b_base, $o_otherOnly) = @_;
-
-    #- select package and dependancies, o_otherOnly may be a reference
-    #- to a hash to indicate package that will strictly be selected
-    #- when value is true, may be selected when value is false (this
-    #- is only used for unselection, not selection)
-    my $state = $packages->{state} ||= {};
-
-    my @l = $packages->resolve_requested($packages->{rpmdb}, $state, packageRequest($packages, $pkg) || {},
-					 callback_choices => \&packageCallbackChoices);
-
-    if ($b_base || $o_otherOnly) {
-	foreach (@l) {
-	    $b_base and $_->set_flag_base;
-	    $o_otherOnly and $o_otherOnly->{$_->id} = $_->flag_requested;
-	}
-	$o_otherOnly and $packages->disable_selected($packages->{rpmdb}, $state, @l);
-    }
-    1;
-}
-
-sub unselectPackage($$;$) {
-    my ($packages, $pkg, $o_otherOnly) = @_;
-
-    #- base package are not unselectable,
-    #- and already unselected package are no more unselectable.
-    $pkg->flag_base and return;
-    $pkg->flag_selected or return;
-
-    my $state = $packages->{state} ||= {};
-    log::l("removing selection on package " . $pkg->fullname);
-    my @l = $packages->disable_selected($packages->{rpmdb}, $state, $pkg);
-    log::l("   removed selection on package " . $pkg->fullname . "gives " . join(',', map { scalar $_->fullname } @l));
-    if ($o_otherOnly) {
-	foreach (@l) {
-	    $o_otherOnly->{$_->id} = undef;
-	}
-	log::l("   reselecting removed selection...");
-	$packages->resolve_requested($packages->{rpmdb}, $state, $o_otherOnly, callback_choices => \&packageCallbackChoices);
-	log::l("   done");
-    }
-    1;
-}
-sub setPackageSelection($$$) {
-    my ($packages, $pkg, $value) = @_;
-    $value ? selectPackage($packages, $pkg) : unselectPackage($packages, $pkg);
-}
-
-sub unselectAllPackages($) {
-    my ($packages) = @_;
-    my %keep_selected;
-    log::l("unselecting all packages...");
-    foreach (@{$packages->{depslist}}) {
-	if ($_->flag_base || $_->flag_installed && $_->flag_selected) {
-	    #- keep track of package that should be kept selected.
-	    $keep_selected{$_->id} = $_;
-	    log::l("...keeping " . $_->fullname);
-	} else {
-	    #- deselect all packages except base or packages that need to be upgraded.
-	    $_->set_flag_required(0);
-	    $_->set_flag_requested(0);
-	}
-    }
-    #- clean staten, in order to start with a brand new set...
-    $packages->{state} = {};
-    $packages->resolve_requested($packages->{rpmdb}, $packages->{state}, \%keep_selected,
-				 callback_choices => \&packageCallbackChoices);
-}
-
-sub urpmidir() {
-    my $v = "$::prefix/var/lib/urpmi";
-    -l $v && !-e _ and unlink $v and mkdir $v, 0755; #- dangling symlink
-    -w $v ? $v : '/tmp';
-}
-
-sub psUpdateHdlistsDeps {
-    my ($packages) = @_;
-    my $need_copy = 0;
-    my $urpmidir = urpmidir();
-
-    #- check if current configuration is still up-to-date and do not need to be updated.
-    foreach (values %{$packages->{mediums}}) {
-	$_->{selected} || $_->{ignored} or next;
-	my $hdlistf = "$urpmidir/hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
-	my $synthesisf = "$urpmidir/synthesis.hdlist.$_->{fakemedium}.cz" . ($_->{hdlist} =~ /\.cz2/ && "2");
-	if (-s $hdlistf != $_->{hdlist_size}) {
-	    install_any::getAndSaveFile("media/media_info/$_->{hdlist}", $hdlistf) or die "no $_->{hdlist} found";
-	    symlinkf $hdlistf, "/tmp/$_->{hdlist}";
-	    ++$need_copy;
-	    chown 0, 0, $hdlistf;
-	}
-	if (-s $synthesisf != $_->{synthesis_hdlist_size}) {
-	    install_any::getAndSaveFile("media/media_info/synthesis.$_->{hdlist}", $synthesisf);
-	    if (-s $synthesisf > 0) { chown 0, 0, $synthesisf } else { unlink $synthesisf }
-	}
-    }
-
-    if ($need_copy) {
-	#- this is necessary for urpmi.
-	install_any::getAndSaveFile("media/media_info/$_", "$urpmidir/$_") && chown 0, 0, "$urpmidir/$_" foreach qw(rpmsrate);
-    }
-}
-
-sub psUsingHdlists {
-    my ($o, $method, $o_hdlistsprefix, $o_packages, $o_initialmedium, $o_callback) = @_;
-    my $is_ftp = $o_hdlistsprefix =~ /^ftp:/;
-    my $listf = install_any::getFile($o_hdlistsprefix && !$is_ftp ? "$o_hdlistsprefix/media/media_info/hdlists" : 'media/media_info/hdlists')
-	or die "no hdlists found";
-    my ($suppl_CDs, $deselectionAllowed) = ($o->{supplmedia} || 0, $o->{askmedia} || 0);
-    if (!$o_packages) {
-	$o_packages = new URPM;
-	#- add additional fields used by DrakX.
-	@$o_packages{qw(count mediums)} = (0, {});
-    }
-
-    #- parse hdlists file.
-    my $medium_name = $o_initialmedium || 1;
-    my (@hdlists, %mediumsize);
-    foreach (<$listf>) {
-	chomp;
-	s/\s*#.*$//;
-	/^\s*$/ and next;
-	#- we'll ask afterwards for supplementary CDs, if the hdlists file contains
-	#- a line that begins with "suppl"
-	if (/^suppl/) { $suppl_CDs = 1; next }
-	#- if the hdlists contains a line "askmedia", deletion of media found
-	#- in this hdlist is allowed
-	if (/^askmedia/) { $deselectionAllowed = 1; next }
-	my $cdsuppl = index($medium_name, 's') >= 0;
-	my ($noauto, $hdlist, $rpmsdir, $descr, $size) = m/^\s*(noauto:)?(hdlist\S*\.cz2?)\s+(\S+)\s*([^(]*)(\(.+\))?$/
-	    or die qq(invalid hdlist description "$_" in hdlists file);
-	$descr =~ s/\s+$//;
-	push @hdlists, [ $hdlist, $medium_name, $rpmsdir, $descr, !$noauto, 
-	    #- hdlist path, suppl CDs are mounted on /mnt/cdrom :
-	    $o_hdlistsprefix ? ($is_ftp ? "media/media_info/$hdlist" : "$o_hdlistsprefix/media/media_info/$hdlist") : undef,
-	];
-	if ($size) {
-	    ($mediumsize{$hdlist}) = $size =~ /(\d+)/; #- XXX assume Mo
-	} else {
-	    $mediumsize{$hdlist} = 0;
-	}
-	$cdsuppl ? ($medium_name = ($medium_name + 1) . 's') : ++$medium_name;
-    }
-    my $copy_rpms_on_disk = 0;
-    if ($deselectionAllowed && !defined $o_initialmedium) {
-	(my $finalhdlists, $copy_rpms_on_disk) = $o->deselectFoundMedia(\@hdlists, \%mediumsize);
-	@hdlists = @$finalhdlists;
-    }
-
-    foreach my $h (@hdlists) {
-	#- make sure the first medium is always selected!
-	#- by default select all image.
-	my $supplmedium = psUsingHdlist($method, $o_packages, @$h);
-	$o_callback and $o_callback->($supplmedium, $o_hdlistsprefix, $method);
-    }
-
-    log::l("psUsingHdlists read " . int(@{$o_packages->{depslist}}) .
-	   " headers on " . int(keys %{$o_packages->{mediums}}) . " hdlists");
-
-    return $o_packages, $suppl_CDs, $copy_rpms_on_disk;
-}
-
-sub psUsingHdlist {
-    my ($method, $packages, $hdlist, $medium_name, $rpmsdir, $descr, $selected, $o_fhdlist, $o_pubkey, $o_nocopy) = @_;
-    my $fakemedium = "$descr ($method$medium_name)";
-    my $urpmidir = urpmidir();
-    log::l("trying to read $hdlist for medium $medium_name");
-
-    my $m = { hdlist     => $hdlist,
-	      method     => $method,
-	      medium     => $medium_name,
-	      rpmsdir    => $rpmsdir, #- where is RPMS directory.
-	      descr      => $descr,
-	      fakemedium => $fakemedium,
-	      selected   => $selected, #- default value is only CD1, it is really the minimal.
-	      ignored    => !$selected, #- keep track of ignored medium by DrakX.
-	      pubkey     => [], #- all pubkey block here
-	    };
-
-    #- copy hdlist file directly to urpmi directory, this will be used
-    #- for getting header of package during installation or after by urpmi.
-    my $newf = "$urpmidir/hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-    unless ($o_nocopy) {
-	my $w_wait;
-	$w_wait = $::o->wait_message(N("Please wait"), N("Downloading file %s...", $hdlist)) if $::o->{method} =~ /^(?:ftp|http|nfs)$/;
-	-e $newf and do { unlink $newf or die "cannot remove $newf: $!" };
-	install_any::getAndSaveFile($o_fhdlist || "media/media_info/$hdlist", $newf) or do { unlink $newf; die "no $hdlist found" };
-	$m->{hdlist_size} = -s $newf; #- keep track of size for post-check.
-	symlinkf $newf, "/tmp/$hdlist";
-	undef $w_wait;
-    }
-
-    my $newsf = "$urpmidir/synthesis.hdlist.$fakemedium.cz" . ($hdlist =~ /\.cz2/ && "2");
-    #- if $o_fhdlist is a filehandle, it's preferable not to try to find the associated synthesis.
-    if (!$o_nocopy && !ref $o_fhdlist) {
-	#- copy existing synthesis file too.
-	my $synth;
-	if ($o_fhdlist) {
-	    $synth = $o_fhdlist;
-	    $synth =~ s/hdlist/synthesis.hdlist/ or $synth = undef;
-	}
-	$synth ||= "media/media_info/synthesis.$hdlist";
-	install_any::getAndSaveFile($synth, $newsf);
-	$m->{synthesis_hdlist_size} = -s $newsf; #- keep track of size for post-check.
-	-s $newsf > 0 or unlink $newsf;
-    }
-
-    chown 0, 0, $newf, $newsf;
-
-    #- get all keys corresponding in the right pubkey file,
-    #- they will be added in rpmdb later if not found.
-    if (!$o_fhdlist || $o_pubkey) {
-	$m->{pubkey} = $o_pubkey;
-	unless ($m->{pubkey}) {
-	    my $pubkey = install_any::getFile("media/media_info/pubkey" . ($hdlist =~ /hdlist(\S*)\.cz2?/ && $1));
-	    $m->{pubkey} = [ $packages->parse_armored_file($pubkey) ];
-	}
-    }
-
-    #- integrate medium in media list, only here to avoid download error (update) to be propagated.
-    $packages->{mediums}{$medium_name} = $m;
-
-    #- parse synthesis (if available) of directly hdlist (with packing).
-    if ($m->{ignored}) {
-	log::l("ignoring packages in $hdlist");
-    } else {
-	my $nb_suppl_pkg_skipped = 0;
-	my $callback = sub {
-	    my (undef, $p) = @_;
-	    our %uniq_pkg_seen;
-	    if ($uniq_pkg_seen{$p->fullname}++) {
-		log::l("skipping " . scalar $p->fullname);
-		++$nb_suppl_pkg_skipped;
-		return 0;
-	    } else {
-		return 1;
-	    }
-	};
-	if (-s $newsf) {
-	    ($m->{start}, $m->{end}) = $packages->parse_synthesis($newsf, callback => $callback);
-	} elsif (-s $newf) {
-	    ($m->{start}, $m->{end}) = $packages->parse_hdlist($newf, callback => $callback);
-	} else {
-	    delete $packages->{mediums}{$medium_name};
-	    unlink $newf;
-	    $o_fhdlist or unlink $newsf;
-	    die "fatal: no hdlist nor synthesis to read for $fakemedium";
-	}
-	$m->{start} > $m->{end} and do { delete $packages->{mediums}{$medium_name};
-					 unlink $newf;
-					 $o_fhdlist or unlink $newsf;
-					 die "fatal: nothing read in hdlist or synthesis for $fakemedium" };
-	log::l("read " . ($m->{end} - $m->{start} + 1) . " packages in $hdlist, $nb_suppl_pkg_skipped skipped");
-    }
-    $m;
-}
-
-sub read_rpmsrate_raw {
-    my ($f) = @_;
-    my $line_nb = 0;
-    my $fatal_error;
-    my (%flags, %rates, @need_to_copy);
-    my (@l);
-    local $_;
-    while (<$f>) {
-	$line_nb++;
-	/\t/ and die "tabulations not allowed at line $line_nb\n";
-	s/#.*//; # comments
-
-	my ($indent, $data) = /(\s*)(.*)/;
-	next if !$data; # skip empty lines
-
-	@l = grep { $_->[0] < length $indent } @l;
-
-	my @m = @l ? @{$l[-1][1]} : ();
-	my ($t, $flag, @l2);
-	while ($data =~ 
-	       /^((
-                   [1-5]
-                   |
-                   (?:            (?: !\s*)? [0-9A-Z_]+(?:".*?")?)
-                   (?: \s*\|\|\s* (?: !\s*)? [0-9A-Z_]+(?:".*?")?)*
-                  )
-                  (?:\s+|$)
-                 )(.*)/x) { #@")) {
-	    ($t, $flag, $data) = ($1,$2,$3);
-	    while ($flag =~ s,^\s*(("[^"]*"|[^"\s]*)*)\s+,$1,) {}
-	    push @m, $flag;
-	    push @l2, [ length $indent, [ @m ] ];
-	    $indent .= $t;
-	}
-	if ($data) {
-	    # has packages on same line
-	    my ($rates, $flags) = partition { /^\d$/ } @m;
-	    my ($rate) = @$rates or die sprintf qq(missing rate for "%s" at line %d (flags are %s)\n), $data, $line_nb, join('&&', @m);
-	    foreach my $name (split ' ', $data) {
-		if (member('INSTALL', @$flags)) {
-		    push @need_to_copy, $name if !member('NOCOPY', @$flags);
-		    next;    #- do not need to put INSTALL flag for a package.
-		}
-		if (member('PRINTER', @$flags)) {
-		    push @need_to_copy, $name;
-		}
-		my @new_flags = @$flags;
-		if (my $previous = $flags{$name}) {
-		    my @common = intersection($flags, $previous);
-		    my @diff1 = difference2($flags, \@common);
-		    my @diff2 = difference2($previous, \@common);
-		    if (!@diff1 || !@diff2) {
-			@new_flags = @common;
-		    } elsif (@diff1 == 1 && @diff2 == 1) {
-			@new_flags = (@common, join('||', $diff1[0], $diff2[0]));
-		    } else {
-			log::l("can not handle complicate flags for packages appearing twice ($name)");
-			$fatal_error++;
-		    }
-		    log::l("package $name appearing twice with different rates ($rate != " . $rates{$name} . ")") if $rate != $rates{$name};
-		}
-		$rates{$name} = $rate;
-		$flags{$name} = \@new_flags;
-	    }
-	    push @l, @l2;
-	} else {
-	    push @l, [ $l2[0][0], $l2[-1][1] ];
-	}
-    }
-    $fatal_error and die "$fatal_error fatal errors in rpmsrate";
-    \%rates, \%flags, \@need_to_copy;
-}
-
-sub read_rpmsrate {
-    my ($packages, $rpmsrate_flags_chosen, $f) = @_;
-
-    my ($rates, $flags, $need_to_copy) = read_rpmsrate_raw($f);
-    
-    foreach (keys %$flags) {
-	my $p = packageByName($packages, $_) or next;
-	my @flags = (@{$flags->{$_}}, map { if_(/locales-(.*)/, qq(LOCALES"$1")) } $p->requires_nosense);
-
-	@flags = map {
-	    my ($user_flags, $known_flags) = partition { /^!?CAT_/ } split('\|\|', $_);
-	    my $ok = find {
-		my $inv = s/^!//;
-		$inv xor do {
-		    if (my ($p) = /^HW"(.*)"/) {
-			detect_devices::matching_desc__regexp($p);
-		    } elsif (($p) = /^HW_CAT"(.*)"/) {
-			modules::probe_category($p);
-		    } elsif (($p) = /^DRIVER"(.*)"/) {
-			detect_devices::matching_driver__regexp($p);
-		    } elsif (($p) = /^TYPE"(.*)"/) {
-			detect_devices::matching_type($p);
-		    } else {
-			$rpmsrate_flags_chosen->{$_};
-		    }
-		};
-	    } @$known_flags;
-	    $ok ? 'TRUE' : @$user_flags ? join('||', @$user_flags) : 'FALSE';
-	} @flags;
-
-	$p->set_rate($rates->{$_});
-	$p->set_rflags(member('FALSE', @flags) ? 'FALSE' : @flags);
-    }
-    push @{$packages->{needToCopy} ||= []}, @$need_to_copy;
-}
-
-sub readCompssUsers {
-    my ($file) = @_;
-
-    my $f = -e $file ? install_any::getLocalFile($file) : install_any::getFile($file)
-	or do { log::l("can not find $file: $!"); return (undef, undef) };
-    my ($compssUsers, $gtk_display_compssUsers) = eval join('', <$f>);
-    if ($@) {
-	log::l("ERROR: bad $file: $@");
-    } else {
-	log::l("compssUsers.pl got: ", join(', ', map { qq("$_->{path}|$_->{label}") } @$compssUsers));
-    }
-    ($compssUsers, $gtk_display_compssUsers);
-}
-
-sub saveCompssUsers {
-    my ($packages, $compssUsers) = @_;
-    my $flat;
-    foreach (@$compssUsers) {
-	my %fl = map { ("CAT_$_" => 1) } @{$_->{flags}};
-	$flat .= "$_->{label} [icon=xxx] [path=$_->{path}]\n";
-	foreach my $p (@{$packages->{depslist}}) {
-	    my @flags = $p->rflags;
-	    if ($p->rate && any { any { !/^!/ && $fl{$_} } split('\|\|') } @flags) {
-		$flat .= sprintf "\t%d %s\n", $p->rate, $p->name;
-	    }
-	}
-    }
-    my $urpmidir = urpmidir();
-    output "$urpmidir/compssUsers.flat", $flat;
-}
-
-sub setSelectedFromCompssList {
-    my ($packages, $rpmsrate_flags_chosen, $min_level, $max_size) = @_;
-    $rpmsrate_flags_chosen->{TRUE} = 1; #- ensure TRUE is set
-    my $nb = selectedSize($packages);
-    foreach my $p (sort { $b->rate <=> $a->rate } @{$packages->{depslist}}) {
-	my @flags = $p->rflags;
-	next if 
-	  !$p->rate || $p->rate < $min_level || 
-	  any { !any { /^!(.*)/ ? !$rpmsrate_flags_chosen->{$1} : $rpmsrate_flags_chosen->{$_} } split('\|\|') } @flags;
-
-	#- determine the packages that will be selected when
-	#- selecting $p. the packages are not selected.
-	my $state = $packages->{state} ||= {};
-
-	my @l = $packages->resolve_requested($packages->{rpmdb}, $state, packageRequest($packages, $p) || {},
-					     callback_choices => \&packageCallbackChoices);
-
-	#- this enable an incremental total size.
-	my $old_nb = $nb;
-	foreach (@l) {
-	    $nb += $_->size;
-	}
-	if ($max_size && $nb > $max_size) {
-	    $nb = $old_nb;
-	    $min_level = $p->rate;
-	    $packages->disable_selected($packages->{rpmdb}, $state, @l);
-	    last;
-	}
-    }
-    my @flags = map_each { if_($::b, $::a) } %$rpmsrate_flags_chosen;
-    log::l("setSelectedFromCompssList: reached size ", formatXiB($nb), ", up to indice $min_level (less than ", formatXiB($max_size), ") for flags ", join(' ', sort @flags));
-    log::l("setSelectedFromCompssList: ", join(" ", sort map { $_->name } grep { $_->flag_selected } @{$packages->{depslist}}));
-    $min_level;
-}
-
-#- usefull to know the size it would take for a given min_level/max_size
-#- just saves the selected packages, call setSelectedFromCompssList and restores the selected packages
-sub saveSelected {
-    my ($packages) = @_;
-    my $state = delete $packages->{state};
-    my @l = @{$packages->{depslist}};
-    my @flags = map { ($_->flag_requested && 1) + ($_->flag_required && 2) + ($_->flag_upgrade && 4) } @l;
-    [ $packages, $state, \@l, \@flags ];
-}
-sub restoreSelected {
-    my ($packages, $state, $l, $flags) = @{$_[0]};
-    $packages->{state} = $state;
-    mapn { my ($pkg, $flag) = @_;
-	   $pkg->set_flag_requested($flag & 1);
-	   $pkg->set_flag_required($flag & 2);
-	   $pkg->set_flag_upgrade($flag & 4);
-         } $l, $flags;
-}
-
-sub computeGroupSize {
-    my ($packages, $min_level) = @_;
-
-    sub inside {
-	my ($l1, $l2) = @_;
-	my $i = 0;
-	return if @$l1 > @$l2;
-	foreach (@$l1) {
-	    my $c;
-	    while ($c = $l2->[$i++] cmp $_) {
-		return if $c == 1 || $i > @$l2;
-	    }
-	}
-	1;
-    }
-
-    sub or_ify {
-	my ($first, @other) = @_;
-	my @l = split('\|\|', $first);
-	foreach (@other) {
-	    @l = map {
-		my $n = $_;
-		map { "$_&&$n" } @l;
-	    } split('\|\|');
-	}
-	@l;
-    }
-    my %or_ify_cache;
-    my $or_ify_cached = sub {
-	$or_ify_cache{$_[0]} ||= join("\t", or_ify(split("\t", $_[0])));
-    };
-    sub or_clean {
-	my ($flags) = @_;
-	my @l = split("\t", $flags);
-	@l = map { [ sort split('&&') ] } @l;
-	my @r;
-	B: while (@l) {
-	    my $e = shift @l;
-	    foreach (@r, @l) {
-		inside($_, $e) and next B;
-	    }
-	    push @r, $e;
-	}
-	join("\t", map { join('&&', @$_) } @r);
-    }
-    my (%group, %memo, $slowpart_counter);
-
-    log::l("pkgs::computeGroupSize");
-    my $time = time();
-
-    my %pkgs_with_same_rflags;
-    foreach (@{$packages->{depslist}}) {
-	next if !$_->rate || $_->rate < $min_level || $_->flag_available;
-	my $flags = join("\t", $_->rflags);
-	next if $flags eq 'FALSE';
-	push @{$pkgs_with_same_rflags{$flags}}, $_;
-    }
-
-    foreach my $raw_flags (keys %pkgs_with_same_rflags) {
-	my $flags = $or_ify_cached->($raw_flags);
-	my @pkgs = @{$pkgs_with_same_rflags{$raw_flags}};
-  
-	#- determine the packages that will be selected when selecting $p.
-	#- make a fast selection (but potentially erroneous).
-	#- installed and upgrade flags must have been computed (see compute_installed_flags).
-	my %newSelection;
-			 
-	my @l2 = map { $_->id } @pkgs;
-	my $id;
-
-	    while (defined($id = shift @l2)) {
-		exists $newSelection{$id} and next;
-		$newSelection{$id} = undef;
-
-		my $pkg = $packages->{depslist}[$id];
-		foreach ($pkg->requires_nosense) {
-		    my @choices = keys %{$packages->{provides}{$_} || {}};
-		    if (@choices <= 1) {
-			push @l2, @choices;
-		    } elsif (! find { exists $newSelection{$_} } @choices) {
-			my ($candidate_id, $prefer_id);
-			foreach (@choices) {
-			    ++$slowpart_counter;
-			    my $ppkg = $packages->{depslist}[$_] or next;
-			    $ppkg->flag_available and $prefer_id = $candidate_id = undef, last;
-			    exists $preferred{$ppkg->name} and $prefer_id = $_;
-			    $ppkg->name =~ /kernel-\d/ and $prefer_id ||= $_;
-			    foreach my $l ($ppkg->requires_nosense) {
-				/locales-/ or next;
-				my $pppkg = packageByName($packages, $l) or next;
-				$pppkg->flag_available and $prefer_id ||= $_;
-			    }
-			    $candidate_id = $_;
-			}
-			if (defined $prefer_id || defined $candidate_id) {
-			    push @l2, defined $prefer_id ? $prefer_id : $candidate_id;
-			}
-		    }
-		}
-	    }
-
-	foreach (keys %newSelection) {
-	    my $p = $packages->{depslist}[$_] or next;
-	    next if $p->flag_selected; #- always installed (accounted in system_size)
-	    my $s = $group{$p->name} || $or_ify_cached->(join("\t", $p->rflags));
-	    my $m = "$flags\t$s";
-	    $group{$p->name} = ($memo{$m} ||= or_clean($m));
-	}
-    }
-    my (%sizes, %pkgs);
-    while (my ($k, $v) = each %group) {
-	my $pkg = packageByName($packages, $k) or next;
-	push @{$pkgs{$v}}, $k;
-	$sizes{$v} += $pkg->size - $packages->{sizes}{$pkg->name};
-    }
-    log::l("pkgs::computeGroupSize took: ", formatTimeRaw(time() - $time));
-    log::l(sprintf "%s %dMB %s", $_, $sizes{$_} / sqr(1024), join(',', @{$pkgs{$_}})) foreach keys %sizes;
-    \%sizes, \%pkgs;
-}
-
-
-sub openInstallLog() {
-
-    my $f = "$::prefix/root/drakx/install.log";
-    open(my $LOG, ">> $f") ? log::l("opened $f") : log::l("Failed to open $f. No install log will be kept."); #-#
-    CORE::select((CORE::select($LOG), $| = 1)[0]);
-    c::rpmErrorSetCallback(fileno $LOG);
-#-    c::rpmSetVeryVerbose();
-    $LOG;
-}
-
-sub rpmDbOpen {
-    my ($o_rebuild_needed) = @_;
-
-    if ($o_rebuild_needed) {
-	if (my $pid = fork()) {
-	    waitpid $pid, 0;
-	    $? & 0xff00 and die "rebuilding of rpm database failed";
-	} else {
-	    log::l("rebuilding rpm database");
-	    my $rebuilddb_dir = "$::prefix/var/lib/rpmrebuilddb.$$";
-	    -d $rebuilddb_dir and log::l("removing stale directory $rebuilddb_dir"), rm_rf($rebuilddb_dir);
-
-	    URPM::DB::rebuild($::prefix) or log::l("rebuilding of rpm database failed: " . c::rpmErrorString()), c::_exit(2);
-
-	    c::_exit(0);
-	}
-    }
-
-    my $db;
-    if ($db = URPM::DB::open($::prefix)) {
-	log::l("opened rpm database for examining existing packages");
-    } else {
-	log::l("unable to open rpm database, using empty rpm db emulation");
-	$db = new URPM;
-    }
-
-    $db;
-}
-
-sub rpmDbOpenForInstall() {
-
-    #- there is a bug in rpm 4.2 where all operations for accessing rpmdb files are not
-    #- always done using prefix, we need to setup a symlink in /var/lib/rpm for that ...
-    if (! -d '/var/lib/rpm') {
-	mkdir_p('/var/lib');
-	symlinkf "$::prefix/var/lib/rpm", "/var/lib/rpm";
-    }
-
-    my $db = URPM::DB::open($::prefix, 1);
-    $db and log::l("opened rpmdb for writing in $::prefix");
-    $db;
-}
-
-sub cleanOldRpmDb() {
-    my $failed;
-
-    foreach (qw(Basenames Conflictname Group Name Packages Providename Requirename Triggername)) {
-	-s "$::prefix/var/lib/rpm/$_" or $failed = 'failed';
-    }
-    #- rebuilding has been successfull, so remove old rpm database if any.
-    #- once we have checked the rpm4 db file are present and not null, in case
-    #- of doubt, avoid removing them...
-    unless ($failed) {
-	log::l("rebuilding rpm database completed successfully");
-	foreach (qw(conflictsindex.rpm fileindex.rpm groupindex.rpm nameindex.rpm packages.rpm
-                    providesindex.rpm requiredby.rpm triggerindex.rpm)) {
-	    -e "$::prefix/var/lib/rpm/$_" or next;
-	    log::l("removing old rpm file $_");
-	    rm_rf("$::prefix/var/lib/rpm/$_");
-	}
-    }
-}
-
-sub selectPackagesAlreadyInstalled {
-    my ($packages) = @_;
-
-    log::l("computing installed flags and size of installed packages");
-    $packages->{sizes} = $packages->compute_installed_flags($packages->{rpmdb});
-}
-
-sub selectPackagesToUpgrade {
-    my ($packages, $o_medium) = @_;
-
-    #- check before that if medium is given, it should be valid.
-    $o_medium && (! defined $o_medium->{start} || ! defined $o_medium->{end}) and return;
-
-    log::l("selecting packages to upgrade");
-
-    my $state = $packages->{state} ||= {};
-    $state->{selected} = {};
-
-    my %selection;
-    $packages->request_packages_to_upgrade($packages->{rpmdb}, $state, \%selection,
-					   requested => undef,
-					   $o_medium ? (start => $o_medium->{start}, end => $o_medium->{end}) : (),
-					  );
-    log::l("resolving dependencies...");
-    $packages->resolve_requested($packages->{rpmdb}, $state, \%selection,
-				 callback_choices => \&packageCallbackChoices);
-    log::l("...done");
-}
-
-sub allowedToUpgrade { $_[0] !~ /^(kernel|kernel22|kernel2.2|kernel-secure|kernel-smp|kernel-linus|kernel-linus2.2|hackkernel|kernel-enterprise)$/ }
-
-sub supplCDMountPoint() { $::o->{mainmethod} eq 'cdrom' ? "/tmp/image" : "/mnt/cdrom" }
-
-sub installTransactionClosure {
-    my ($packages, $id2pkg) = @_;
-    my ($id, %closure, @l, $medium, $min_id, $max_id);
-
-    @l = sort { $a <=> $b } keys %$id2pkg;
-
-    #- search first usable medium (sorted by medium ordering).
-    foreach (sort { $a->{start} <=> $b->{start} } values %{$packages->{mediums}}) {
-	unless ($_->{selected}) {
-	    #- this medium is not selected, but we have to make sure no package are left
-	    #- in $id2pkg.
-	    if (defined $_->{start} && defined $_->{end}) {
-		foreach ($_->{start} .. $_->{end}) {
-		    delete $id2pkg->{$_};
-		}
-		@l = sort { $a <=> $b } keys %$id2pkg;
-	    }
-	    #- anyway, examine the next one.
-	    next;
-	}
-	if ($l[0] <= $_->{end}) {
-	    #- we have a candidate medium, it could be the right one containing
-	    #- the first package of @l...
-	    $l[0] >= $_->{start} and $medium = $_, last;
-	    #- ... but it could be necessary to find the first
-	    #- medium containing package of @l.
-	    foreach my $id (@l) {
-		$id >= $_->{start} && $id <= $_->{end} and $medium = $_, last;
-	    }
-	    $medium and last;
-	}
-    }
-    $medium or return (); #- no more medium usable -> end of installation by returning empty list.
-    ($min_id, $max_id) = ($medium->{start}, $medium->{end});
-
-    #- Supplementary CD : switch temporarily to "cdrom" method
-    my $suppl_CD = isSupplCDMedium($medium);
-    $::o->{mainmethod} = $::o->{method};
-    local $::o->{method} = do {
-	my $cdrom;
-	cat_("/proc/mounts") =~ m,(/dev/\S+)\s+(?:/mnt/cdrom|/tmp/image), and $cdrom = $1;
-	if (!defined $cdrom) {
-	    (my $cdromdev) = detect_devices::cdroms();
-	    $cdrom = $cdromdev->{device};
-	    log::l("cdrom redetected at $cdrom");
-	    devices::make($cdrom);
-	    install_any::ejectCdrom($cdrom) if $::o->{method} eq 'cdrom';
-	    install_any::mountCdrom(supplCDMountPoint(), $cdrom);
-	} else { log::l("cdrom already found at $cdrom") }
-	'cdrom';
-    } if $suppl_CD;
-    #- it is sure at least one package will be installed according to medium chosen.
-    install_any::useMedium($medium->{medium});
-    if (install_any::method_allows_medium_change($medium->{method})) {
-	my $pkg = $packages->{depslist}[$l[0]];
-
-	#- force changeCD callback to be called from main process.
-	install_any::getFile($pkg->filename, $::o->{method}, $suppl_CD ? supplCDMountPoint() : undef);
-	#- close opened handle above.
-	install_any::getFile('XXX');
-    }
-
-    while (defined($id = shift @l)) {
-	my @l2 = $id;
-
-	while (defined($id = shift @l2)) {
-	    exists $closure{$id} and next;
-	    $id >= $min_id && $id <= $max_id or next;
-	    $closure{$id} = undef;
-
-	    my $pkg = $packages->{depslist}[$id];
-	    foreach ($pkg->requires_nosense) {
-		foreach (keys %{$packages->{provides}{$_} || {}}) {
-		    if ($id2pkg->{$_}) {
-			push @l2, $_;
-			last;
-		    }
-		}
-	    }
-	}
-
-	keys %closure >= $limitMinTrans and last;
-    }
-
-    map { delete $id2pkg->{$_} } grep { $id2pkg->{$_} } sort { $a <=> $b } keys %closure;
-}
-
-sub installCallback {
-#    my $msg = shift;
-#    log::l($msg .": ". join(',', @_));
-}
-
-sub install {
-    my ($isUpgrade, $toInstall, $packages) = @_;
-    my %packages;
-
-    delete $packages->{rpmdb}; #- make sure rpmdb is closed before.
-
-    return if !@$toInstall;
-
-    #- for root loopback'ed /boot
-    my $loop_boot = loopback::prepare_boot();
-
-    #- first stage to extract some important informations
-    #- about the packages selected. this is used to select
-    #- one or many transaction.
-    my ($total, $nb);
-    foreach my $pkg (@$toInstall) {
-	$packages{$pkg->id} = $pkg;
-	$nb++;
-	$total += to_int($pkg->size); #- do not correct for upgrade!
-    }
-
-    log::l("pkgs::install $::prefix");
-    log::l("pkgs::install the following: ", join(" ", map { $_->name } values %packages));
-
-    URPM::read_config_files();
-    my $LOG = openInstallLog();
-
-    #- do not modify/translate the message used with installCallback since
-    #- these are keys during progressing installation, or change in other
-    #- place (install_steps_gtk.pm,...).
-    installCallback($packages, 'user', undef, 'install', $nb, $total);
-
-    do {
-	my @transToInstall = installTransactionClosure($packages, \%packages);
-	$nb = values %packages;
-
-	#- added to exit typically after last media unselected.
-	if ($nb == 0 && scalar(@transToInstall) == 0) {
-	    cleanHeaders();
-
-	    loopback::save_boot($loop_boot);
-	    return;
-	}
-
-	#- extract headers for parent as they are used by callback.
-	extractHeaders(\@transToInstall, $packages->{mediums});
-
-	my ($retry_pkg, $retry_count);
-	while ($retry_pkg || @transToInstall) {
-	    local (*INPUT, *OUTPUT); pipe INPUT, OUTPUT;
-	    if (my $pid = fork()) {
-		close OUTPUT;
-		my $error_msg = '';
-		local $_;
-		while (<INPUT>) {
-		    if (/^die:(.*)/) {
-			$error_msg = $1;
-			last;
-		    } else {
-			chomp;
-			my @params = split ":";
-			if ($params[0] eq 'close') {
-			    my $pkg = $packages->{depslist}[$params[1]];
-			    #- update flag associated to package.
-			    $pkg->set_flag_installed(1);
-			    $pkg->set_flag_upgrade(0);
-			    #- update obsoleted entry.
-			    foreach (keys %{$packages->{state}{rejected}}) {
-				if (exists $packages->{state}{rejected}{$_}{closure}{$pkg->fullname}) {
-				    delete $packages->{state}{rejected}{$_}{closure}{$pkg->fullname};
-				    %{$packages->{state}{rejected}{$_}{closure}} or delete $packages->{state}{rejected}{$_};
-				}
-			    }
-			} else {
-			    installCallback($packages, @params);
-			}
-		    }
-		}
-		$error_msg and $error_msg .= join('', <INPUT>);
-		waitpid $pid, 0;
-		close INPUT;
-		$error_msg and die $error_msg;
-	    } else {
-		#- child process will run each transaction.
-		$SIG{SEGV} = sub { log::l("segmentation fault on transactions"); c::_exit(0) };
-		my @prev_pids = grep { /^\d+$/ } all("/proc");
-		close INPUT;
-		select((select(OUTPUT), $| = 1)[0]);
-		if ($::testing) {
-		    my $size_typical = $nb ? int($total/$nb) : 0;
-		    foreach (@transToInstall) {
-			log::l("i would install ", $_->name, " now");
-			my $id = $_->id;
-			print OUTPUT "inst:$id:start:0:$size_typical\ninst:$id:progress:0:$size_typical\nclose:$id\n";
-		    }
-		} else { eval {
-		    my $db = rpmDbOpenForInstall() or die "error opening RPM database: ", c::rpmErrorString();
-		    my $trans = $db->create_transaction($::prefix);
-		    if ($retry_pkg) {
-			log::l("opened rpm database for retry transaction of 1 package only");
-			$trans->add($retry_pkg, $isUpgrade && allowedToUpgrade($retry_pkg->name))
-			    or log::l("add failed for " . $retry_pkg->fullname);
-		    } else {
-			log::l("opened rpm database for transaction of " . int(@transToInstall) .
-			       " new packages, still $nb after that to do");
-			$trans->add($_, $isUpgrade && allowedToUpgrade($_->name))
-			  foreach @transToInstall;
-		    }
-
-		    my @checks = $trans->check; @checks and log::l("check failed : " . join("\n               ", @checks));
-		    $trans->order or die "error ordering package list: " . c::rpmErrorString();
-		    $trans->set_script_fd(fileno $LOG);
-
-		    log::l("rpm transactions start");
-		    my $fd; #- since we return the "fileno", perl does not know we're still using it, and so closes it, and :-(
-		    my @probs = $trans->run($packages, force => 1, nosize => 1, callback_open => sub {
-						my ($data, $_type, $id) = @_;
-						my $pkg = defined $id && $data->{depslist}[$id];
-						my $medium = packageMedium($packages, $pkg);
-						my $f = $pkg && $pkg->filename;
-						print $LOG "$f\n";
-						if (isSupplCDMedium($medium)) {
-						    $fd = install_any::getFile($f, $::o->{method}, supplCDMountPoint());
-						} else {
-						    $fd = install_any::getFile($f, $::o->{method}, $medium->{prefix});
-						}
-						$fd ? fileno $fd : -1;
-					    }, callback_close => sub {
-						my ($data, $_type, $id) = @_;
-						my $pkg = defined $id && $data->{depslist}[$id] or return;
-						my $check_installed;
-						$db->traverse_tag('name', [ $pkg->name ], sub {
-								      my ($p) = @_;
-								      $check_installed ||= $pkg->compare_pkg($p) == 0;
-								  });
-						$check_installed or log::l($pkg->name . " not installed, " . c::rpmErrorString());
-						$check_installed and print OUTPUT "close:$id\n";
-					    }, callback_inst => sub {
-						my ($_data, $type, $id, $subtype, $amount, $total) = @_;
-						print OUTPUT "$type:$id:$subtype:$amount:$total\n";
-					    });
-		    log::l("transactions done, now trying to close still opened fd");
-		    install_any::getFile('XXX'); #- close still opened fd.
-
-		    @probs and die "installation of rpms failed:\n  ", join("\n  ", @probs);
-		}; $@ and print OUTPUT "die:$@\n" }
-		close OUTPUT;
-
-		#- now search for child process which may be locking the cdrom, making it unable to be ejected.
-		my @allpids = grep { /^\d+$/ } all("/proc");
-		my %ppids;
-		foreach (@allpids) {
-		    push @{$ppids{$1 || 1}}, $_
-		      if cat_("/proc/$_/status") =~ /^PPid:\s+(\d+)/m;
-		}
-		my @killpid = difference2(\@allpids, [ @prev_pids, 
-						       difference2([ $$, hashtree2list(getppid(), \%ppids) ],
-								   [ hashtree2list($$, \%ppids) ]) ]);
-	
-		if (@killpid && $::isInstall) {
-		    foreach (@killpid) {
-			my ($prog, @para) = split("\0", cat_("/proc/$_/cmdline"));
-			log::l("ERROR: DrakX should not have to clean the packages shit. Killing $_: " . join(' ', $prog, @para) . ".") if $prog ne '/usr/lib/gconfd-2';
-		    }
-		    kill 15, @killpid;
-		    sleep 2;
-		    kill 9, @killpid;
-		}
-
-		c::_exit(0);
-	    }
-
-	    #- if we are using a retry mode, this means we have to split the transaction with only
-	    #- one package for each real transaction.
-	    if (!$retry_pkg) {
-		my @badPackages;
-		foreach (@transToInstall) {
-		    if (!$_->flag_installed && packageMedium($packages, $_)->{selected} && !exists($ignoreBadPkg{$_->name})) {
-			push @badPackages, $_;
-			log::l("bad package " . $_->fullname);
-		    } else {
-			$_->free_header;
-		    }
-		}
-		@transToInstall = @badPackages;
-		#- if we are in retry mode, we have to fetch only one package at a time.
-		$retry_pkg = shift @transToInstall;
-		$retry_count = 3;
-	    } else {
-		my $name;
-		if (!$retry_pkg->flag_installed && packageMedium($packages, $retry_pkg)->{selected} && !exists($ignoreBadPkg{$retry_pkg->name})) {
-		    if ($retry_count) {
-			log::l("retrying installing package " . $retry_pkg->fullname . " alone in a transaction");
-			--$retry_count;
-		    } else {
-			log::l("bad package " . $retry_pkg->fullname . " unable to be installed");
-			$retry_pkg->set_flag_requested(0);
-			$retry_pkg->set_flag_required(0);
-			#- keep name to display (problem of displaying ?).
-			$name = $retry_pkg->fullname;
-			$retry_pkg->free_header;
-			$retry_pkg = shift @transToInstall;
-			$retry_count = 3;
-			#- now it could be safe to display error message ?
-			cdie("error installing package list: $name");
-		    }
-		}
-		#- check if name has been set (so that the following code has been executed already).
-		if (!$name && ($retry_pkg->flag_installed || !$retry_pkg->flag_selected)) {
-		    $retry_pkg->free_header;
-		    $retry_pkg = shift @transToInstall;
-		    $retry_count = 3;
-		}
-	    }
-	}
-	cleanHeaders();
-    } while $nb > 0 && !$pkgs::cancel_install;
-
-    log::l("closing install.log file");
-    close $LOG;
-    eval { fs::umount("/mnt/cdrom") };
-
-    cleanHeaders();
-
-    loopback::save_boot($loop_boot);
-}
-
-sub remove {
-    my ($toRemove, $packages) = @_;
-
-    delete $packages->{rpmdb}; #- make sure rpmdb is closed before.
-
-    return if !@{$toRemove || []};
-
-    my $db = rpmDbOpenForInstall() or die "error opening RPM database: ", c::rpmErrorString();
-    my $trans = $db->create_transaction($::prefix);
-
-    foreach my $p (@$toRemove) {
-	#- stuff remove all packages that matches $p, not a problem since $p has name-version-release format.
-	$trans->remove($p);
-    }
-
-    #- we are not checking depends since it should come when
-    #- upgrading a system. although we may remove some functionalities ?
-
-    #- do not modify/translate the message used with installCallback since
-    #- these are keys during progressing installation, or change in other
-    #- place (install_steps_gtk.pm,...).
-    installCallback($db, 'user', undef, 'remove', scalar @$toRemove);
-
-    if (my @probs = $trans->run(undef, force => 1)) {
-	die "removing of old rpms failed:\n  ", join("\n  ", @probs);
-    } else {
-	#- clean ask_remove according to package marked to be deleted.
-	if ($packages) {
-	    foreach my $p (@$toRemove) {
-		delete $packages->{state}{ask_remove}{$p};
-	    }
-	}
-    }
-
-    #- keep in mind removing of these packages by cleaning $toRemove.
-    @{$toRemove || []} = ();
-}
-
-sub selected_leaves {
-    my ($packages) = @_;
-    my @leaves;
-
-    foreach (@{$packages->{depslist}}) {
-	$_->flag_requested && !$_->flag_base and push @leaves, $_->name;
-    }
-    \@leaves;
-}
-
-sub naughtyServers_list {
-    my ($quiet) = @_;
-
-    my @_old_81 = qw(
-freeswan
-);
-    my @_old_82 = qw(
-vnc-server
-postgresql-server
-);
-
-    my @_old_92 = qw(
-postfix ypbind bind ibod
-);
-
-    my @_removed_92 = qw(
-mcserv
-samba
-lpr
-);
-
-    my @_moved_to_contrib_92 = qw(
-boa
-LPRng
-wu-ftpd
-am-utils
-);
-
-    my @new_80 = qw(
-jabber
-MySQL
-am-utils
-apache
-boa
-cfengine
-cups
-drakxtools-http
-finger-server
-imap
-leafnode
-lpr
-ntp
-openssh-server
-pidentd
-proftpd
-rwall
-rwho
-squid
-webmin
-wu-ftpd
-);
-
-    my @new_81 = qw(
-apache-mod_perl
-ftp-server-krb5
-mcserv
-samba
-telnet-server-krb5
-ypserv
-);
-
-    my @new_82 = qw(
-LPRng
-httpd-naat
-inn
-netatalk
-nfs-utils
-rusers-server
-samba-swat
-tftp-server
-ucd-snmp
-);
-
-    my @new_92 = qw(
-apache2
-apache2-mod_perl
-DansGuardian
-MySQL-Max
-clusternfs
-gkrellm-server
-lisa
-mon
-net-snmp
-openldap-servers
-samba-server
-saned
-vsftpd
-);
-
-    my @not_warned = qw(
-nfs-utils-clients
-portmap
-); # X server
-
-    (@new_80, @new_81, @new_82, @new_92, if_(!$quiet, @not_warned));
-}
-
-sub naughtyServers {
-    my ($packages) = @_;
-
-    grep {
-	my $p = packageByName($packages, $_);
-	$p && $p->flag_selected;
-    } naughtyServers_list('quiet');
-}
-
-sub hashtree2list {
-    my ($e, $h) = @_;
-    my @l;
-    my @todo = $e;
-    while (@todo) {
-	my $e = shift @todo;
-	push @l, $e;
-	push @todo, @{$h->{$e} || []};
-    }
-    @l;
-}
-
-1;
diff --git a/perl-install/printer/STATUS b/perl-install/printer/STATUS
deleted file mode 100644
index e9c5bc205..000000000
--- a/perl-install/printer/STATUS
+++ /dev/null
@@ -1,5 +0,0 @@
-printerdrake status
-
-- printer::printerdrake still needs to be splited/cleaned
-
-- printer::printerdrake should probably be renamed printer::gui
diff --git a/perl-install/printer/common.pm b/perl-install/printer/common.pm
deleted file mode 100644
index 9d8f4d9a5..000000000
--- a/perl-install/printer/common.pm
+++ /dev/null
@@ -1,86 +0,0 @@
-package printer::common;
-
-use strict;
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(addentry addsection removeentry  removesection);
-
-
-sub addentry {
-    my ($section, $entry, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $entryinserted = 0;
-    my @lines = split("\n", $filecontent);
-    foreach (@lines) {
-	if (!$sectionfound) {
-	    $sectionfound = 1 if /^\s*\[\s*$section\s*\]\s*$/;
-	} else {
-	    if (!/^\s*$/ && !/^\s*;/) { #-#
-		$_ = "$entry\n$_";
-		$entryinserted = 1;
-		last;
-	    }
-	}
-    }
-    push(@lines, $entry) if $sectionfound && !$entryinserted;
-    return join "\n", @lines;
-}
-
-sub addsection {
-    my ($section, $filecontent) = @_;
-    my @lines = split("\n", $filecontent);
-    foreach (@lines) {
-     # section already there, nothing to be done
-     return $filecontent if /^\s*\[\s*$section\s*\]\s*$/;
-    }
-    return $filecontent . "\n[$section]";
-}
-
-sub removeentry {
-    my ($section, $entry, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $done = 0;
-    my @lines = split("\n", $filecontent);
-    foreach (@lines) {
-	$_ = "$_\n";
-	next if $done;
-	if (!$sectionfound) {
-	    $sectionfound = 1 if /^\s*\[\s*$section\s*\]\s*$/;
-	} else {
-	    if (/^\s*\[.*\]\s*$/) { # Next section
-		$done = 1;
-	    } elsif (/^\s*$entry/) {
-		$_ = "";
-		$done = 1;
-	    }
-	}
-    }
-    return join "", @lines;
-}
-
-sub removesection {
-    my ($section, $filecontent) = @_;
-    my $sectionfound = 0;
-    my $done = 0;
-    my @lines = split("\n", $filecontent);
-    foreach (@lines) {
-	$_ = "$_\n";
-	next if $done;
-	if (!$sectionfound) {
-	    if (/^\s*\[\s*$section\s*\]\s*$/) {
-		$_ = "";
-		$sectionfound = 1;
-	    }
-	} else {
-	    if (/^\s*\[.*\]\s*$/) { # Next section
-		$done = 1;
-	    } else {
-		$_ = "";
-	    }
-	}
-    }
-    return join "", @lines;
-}
-
-1;
diff --git a/perl-install/printer/cups.pm b/perl-install/printer/cups.pm
deleted file mode 100644
index 64b0df045..000000000
--- a/perl-install/printer/cups.pm
+++ /dev/null
@@ -1,145 +0,0 @@
-package printer::cups;
-
-use strict;
-
-use printer::data;
-use run_program;
-use common;
-
-
-#------------------------------------------------------------------------------
-
-sub lpstat_lpv() {
-
-    # Get a list of remotely defined print queues, with "Description" and
-    # "Location"
-
-    # Info to return
-    my @items;
-
-    # Hash to simplify the adding of the URIs
-    my $itemshash;
-
-    # Run the "lpstat" command in a mode to give as much info about the
-    # print queues as possible
-    my @lpstat = run_program::rooted_get_stdout
-	($::prefix, 'lpstat', '-l', '-p', '-v');
-    
-    my $currentitem = -1;
-    for my $line (@lpstat) {
-	chomp ($line);
-	if (!($line =~ m!^\s*$!)) {
-	    if ($line =~ m!^printer\s+(\S+)\s+(\S.*)$!) {
-		# Beginning of new printer's entry
-		my $name = $1;
-		push(@items, {});
-		$currentitem = $#items;
-		$itemshash->{$name} = $currentitem;
-		$items[$currentitem]{queuename} ||= $name;
-	    } elsif ($line =~ m!^\s+Description:\s+(\S.*)$!) {
-		# Description field
-		if ($currentitem != -1) {
-		    $items[$currentitem]{description} ||= $1;
-		}
-	    } elsif ($line =~ m!^\s+Location:\s+(\S.*)$!) {
-		# Location field
-		if ($currentitem != -1) {
-		    $items[$currentitem]{location} ||= $1;
-		}
-	    } elsif ($line =~ m!^device\s+for\s+(\S+):\s+(\S.*)$!) {
-		# "device for ..." line, extract URI
-		my $name = $1;
-		my $uri = $2;
-		if (defined($itemshash->{$name})) {
-		    if ($uri !~ /:/) {$uri = "file:" . $uri};
-		    $currentitem = $itemshash->{$name};
-		    if (($currentitem <= $#items) &&
-			($items[$currentitem]{queuename} eq $name)) {
-			$items[$currentitem]{uri} ||= $uri;
-			if ($uri =~ m!^ipp://([^/:]+)[:/]!) {
-			    $items[$currentitem]{ipp} = $1;
-			}
-		    }
-		}
-	    }
-	}
-    }
-    return @items;
-}
-
-sub lpstat_v() {
-    map {
-	if (my ($queuename, $uri) = m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) {
-	    +{ queuename => $queuename, uri => $uri, if_($uri =~ m!^ipp://([^/:]+)[:/]!, ipp => $1) };
-	} else {
-	    ();
-	}
-    } run_program::rooted_get_stdout($::prefix, 'lpstat', '-v');
-}
-
-sub lpinfo_v() {
-    map {
-	if (my ($type, $uri) = m/^\s*(\S+)\s+(\S+)\b/) {
-	    if ($uri =~ m!:/!) {
-		$uri;
-	    } elsif ($type =~ m/network/i) {
-		"$uri://";
-	    } else {
-		"$uri:/";
-	    }
-	} else {
-	    ();
-	}
-    } run_program::rooted_get_stdout($::prefix, 'lpinfo', '-v');
-}
-
-sub read_printer_list {
-    my ($printer) = @_;
-    # This function reads in a list of all printers which the local CUPS
-    # daemon currently knows, including remote ones.
-    map {
-	my $comment = 
-	  $_->{ipp} && !$printer->{configured}{$_->{queuename}} ?
-	    N("(on %s)", $_->{ipp}) : N("(on this machine)");
-	"$_->{queuename} $comment";
-    } lpstat_v();
-}
-
-sub get_formatted_remote_queues {
-    my ($printer) = @_;
-
-    # This function reads in a list of all remote printers which the local 
-    # CUPS daemon knows due to broadcasting of remote servers or 
-    # "BrowsePoll" entries in the local /etc/cups/cupsd.conf/
-    map {
-	join('!', if_($printer->{expert}, N("CUPS")), N("Configured on other machines"), $_);
-    } map {
-	my $comment = N("On CUPS server \"%s\"", ($_->{ipp} ? $_->{ipp} : $printer->{remote_cups_server})) . ($_->{queuename} eq $printer->{DEFAULT} ? N(" (Default)") : "");
-	"$_->{queuename}: $comment";
-    } grep { 
-	!$printer->{configured}{$_->{queuename}};
-    } lpstat_v();
-}
-
-sub get_remote_queues {
-    my ($printer) = @_;
-    # The following code reads in a list of all remote printers which the
-    # local CUPS daemon knows due to broadcasting of remote servers or 
-    # "BrowsePoll" entries in the local /etc/cups/cupsd.conf
-    map {
-	"$_->{queuename}|$_->{ipp}";
-    } grep { 
-	$_->{ipp} && !$printer->{configured}{$_->{queuename}};
-    } lpstat_v();
-}
-
-sub queue_enabled {
-    my ($queue) = @_;
-    0 != grep {
-	/\b$queue\b.*\benabled\b/i
-    } run_program::rooted_get_stdout($::prefix, 'lpstat', '-p', $queue);
-}
-
-
-
-1;
diff --git a/perl-install/printer/data.pm b/perl-install/printer/data.pm
deleted file mode 100644
index 0f5cad96c..000000000
--- a/perl-install/printer/data.pm
+++ /dev/null
@@ -1,170 +0,0 @@
-package printer::data;
-
-use strict;
-use common;
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(%spoolers %spooler_inv %shortspooler_inv
-	     $kernelversion $usbprintermodule
-	     $commonpackages $gimpprintingpackages $localqueuepackages);
-
-
-# Kernel-specific data
-our $kernelversion = `uname -r 2>/dev/null`;
-$kernelversion =~ s/^(\s*)(\d+\.\d+)(\..*)$/$2/;
-chomp $kernelversion;
-
-our $usbprintermodule = ($kernelversion eq '2.6' ? "usblp" : "printer");
-
-# Packages which are always needed to run printerdrake
-our $commonpackages = [ [ 'foomatic-db-engine' ], 
-			[ '/usr/bin/foomatic-configure' ] ];
-
-# Packages which are needed to print with the GIMP
-our $gimpprintingpackages = [ [ 'gutenprint-gimp2' ], 
-			      [ '/usr/lib/gimp/2.0/plug-ins/print' ] ];
-
-# Packages which are needed to create and manage local print queues
-our $localqueuepackages = [ [ 'foomatic-filters', 'foomatic-db',
-			      'foomatic-db-hpijs', 'foomatic-db-engine',
-			      'printer-filters', 
-			      'printer-utils', 'printer-testpages', 
-			      'ghostscript', 'hplip-hpijs', 'gutenprint-ijs',
-			      'gutenprint-foomatic', 'gutenprint-escputil', 
-			      'postscript-ppds', 'hplip-hpijs-ppds', 
-			      'hplip-model-data', 'nmap', 'scli' ],
-			    [qw(/usr/bin/foomatic-rip
-				/usr/share/foomatic/db/source/driver/ljet4.xml
-				/usr/share/foomatic/db/source/driver/hpijs.xml
-				/usr/bin/foomatic-configure
-				/usr/bin/pnm2ppa
-				/usr/bin/getusbprinterid
-				/usr/share/printer-testpages/testprint.ps
-				/usr/bin/gs-common
-				/usr/bin/hpijs
-				/usr/share/man/man1/ijsgutenprint.1.bz2
-				/usr/share/foomatic/db/source/driver/gutenprint-ijs.5.0.xml
-				/usr/bin/escputil
-				/usr/share/cups/model/postscript.ppd.gz
-				/usr/share/ppd/HP/HP-2000C-hpijs.ppd.gz
-				/usr/share/hplip/data/xml/models.xml
-				/usr/bin/nmap
-				/usr/bin/scli)] ];
-
-# Spooler-specific data
-our %spoolers = ('pdq' => {
-                          'help' => "/usr/bin/pdq -h -P %s 2>&1 |",
-			  'print_command' => 'lpr-pdq',
-			  'print_gui' => 'xpdq',
-			  'long_name' => N("PDQ - Print, Do not Queue"),
-			  'short_name' => N("PDQ"),
-			  'local_queues' => 1,
-                          'packages2add' => [ [ 'pdq' ], [qw(/usr/bin/pdq /usr/X11R6/bin/xpdq)] ],
-                          'alternatives' => [
-                              [ 'lpr', '/usr/bin/lpr-pdq' ],
-                              [ 'lpq', '/usr/bin/lpq-foomatic' ],
-                              [ 'lprm', '/usr/bin/lprm-foomatic' ]
-                          ],
-			  },
-		 'lpd' => {
-                        'print_command' => 'lpr-lpd',
-			'print_gui' => 'lpr-lpd',
-			'long_name' => N("LPD - Line Printer Daemon"),
-                        'short_name' => N("LPD"),
-                        'boot_spooler' => 'lpd',
-                        'service' => 'lpd',
-			'local_queues' => 1,
-                        'packages2add' => [ [qw(lpr net-tools a2ps ImageMagick)],
-                                            [qw(/usr/sbin/lpf
-                                                /usr/sbin/lpd
-                                                /sbin/ifconfig
-                                                /usr/bin/a2ps
-                                                /usr/bin/convert)] ],
-                        'packages2rm' => [ 'LPRng', '/usr/lib/filters/lpf' ],
-                        'alternatives' => [
-                            [ 'lpr', '/usr/bin/lpr-lpd' ],
-                            [ 'lpq', '/usr/bin/lpq-lpd' ],
-                            [ 'lprm', '/usr/bin/lprm-lpd' ],
-                            [ 'lpc', '/usr/sbin/lpc-lpd' ]
-                        ]
-		    },
-		 'lprng' => {
-		     'print_command' => 'lpr-lpd',
-		     'print_gui' => 'lpr-lpd',
-		     'long_name' => N("LPRng - LPR New Generation"),
-		     'short_name' => N("LPRng"),
-		     'boot_spooler' => 'lpd',
-		     'service' => 'lpd',
-		     'local_queues' => 1,
-		     'packages2add' => [ [qw(LPRng net-tools a2ps ImageMagick)],
-					 [qw(/usr/lib/filters/lpf
-					     /usr/sbin/lpd
-					     /sbin/ifconfig
-					     /usr/bin/a2ps
-					     /usr/bin/convert)] ],
-		     'packages2rm' => [ 'lpr', '/usr/sbin/lpf' ],
-		     'alternatives' => [
-					[ 'lpr', '/usr/bin/lpr-lpd' ],
-					[ 'lpq', '/usr/bin/lpq-lpd' ],
-					[ 'lprm', '/usr/bin/lprm-lpd' ],
-					[ 'lp', '/usr/bin/lp-lpd' ],
-					[ 'cancel', '/usr/bin/cancel-lpd' ],
-					[ 'lpstat', '/usr/bin/lpstat-lpd' ],
-					[ 'lpc', '/usr/sbin/lpc-lpd' ]
-					]
-				    },
-		 'cups' => {
-		     'help' => "/usr/bin/lphelp %s |",
-		     'print_command' => 'lpr-cups',
-		     'print_gui' => 'xpp',
-		     'long_name' => N("CUPS - Common Unix Printing System"),
-		     'short_name' => N("CUPS"),
-		     'boot_spooler' => 'cups',
-		     'service' => 'cups',
-		     'local_queues' => 1,
-		     'packages2add' => [ ['cups', 'net-tools', 'xpp', 'cups-drivers', 'gutenprint-cups',
-					  $::isInstall ? 'curl' : 'webfetch'],
-					 [ qw(/usr/lib/cups/cgi-bin/printers.cgi
-					      /sbin/ifconfig
-					      /usr/bin/xpp
-					      /usr/lib/cups/filter/rastertolxx74 
-					      /usr/lib/cups/filter/commandtoepson),
-					   $::isInstall ||
-					   !(-x '/usr/bin/wget') ?
-					   '/usr/bin/curl' :
-					   '/usr/bin/wget' ] ],
-		     'alternatives' => [
-					[ 'lpr', '/usr/bin/lpr-cups' ],
-					[ 'lpq', '/usr/bin/lpq-cups' ],
-					[ 'lprm', '/usr/bin/lprm-cups' ],
-					[ 'lp', '/usr/bin/lp-cups' ],
-					[ 'cancel', '/usr/bin/cancel-cups' ],
-					[ 'lpstat', '/usr/bin/lpstat-cups' ],
-					[ 'lpc', '/usr/sbin/lpc-cups' ]
-					]
-				    },
-		 'rcups' => {
-		     'help' => "/usr/bin/lphelp %s |",
-		     'print_command' => 'lpr-cups',
-		     'print_gui' => 'xpp',
-		     'long_name' => N("CUPS - Common Unix Printing System (remote server)"),
-		     'short_name' => N("Remote CUPS"),
-		     'local_queues' => 0,
-		     'packages2add' => [ ['cups-common', 'xpp'],
-					 ['/usr/bin/lpr-cups',
-					  '/usr/bin/xpp'] ],
-		     'alternatives' => [
-					[ 'lpr', '/usr/bin/lpr-cups' ],
-					[ 'lpq', '/usr/bin/lpq-cups' ],
-					[ 'lprm', '/usr/bin/lprm-cups' ],
-					[ 'lp', '/usr/bin/lp-cups' ],
-					[ 'cancel', '/usr/bin/cancel-cups' ],
-					[ 'lpstat', '/usr/bin/lpstat-cups' ],
-					[ 'lpc', '/usr/sbin/lpc-cups' ]
-					]
-				    }
-		 );
-our %spooler_inv = map { $spoolers{$_}{long_name} => $_ } keys %spoolers;
-
-our %shortspooler_inv = map { $spoolers{$_}{short_name} => $_ } keys %spoolers;
diff --git a/perl-install/printer/default.pm b/perl-install/printer/default.pm
deleted file mode 100644
index 41da25c56..000000000
--- a/perl-install/printer/default.pm
+++ /dev/null
@@ -1,64 +0,0 @@
-package printer::default;
-
-use strict;
-use run_program;
-use common;
-
-#-configuration directory of Foomatic
-my $FOOMATICCONFDIR = "/etc/foomatic"; 
-#-location of the file containing the default spooler's name
-my $FOOMATIC_DEFAULT_SPOOLER = "$FOOMATICCONFDIR/defaultspooler";
-
-sub set_printer {
-    my ($printer) = $_[0];
-    my $spooler = $printer->{SPOOLER};
-    if ($spooler eq "rcups") {
-	run_program::rooted($::prefix, "lpoptions",
-			    "-d", $printer->{DEFAULT}) or return 0;
-    } else {
-	run_program::rooted($::prefix, "foomatic-configure",
-			    "-D", "-q", "-s", $spooler,
-			    "-n", $printer->{DEFAULT}) or return 0;
-    }
-    return 1;
-}
-
-sub get_printer {
-    my $printer = $_[0];
-    my $spooler = $printer->{SPOOLER};
-    $spooler = "cups" if $spooler eq "rcups";
-    local *F;
-    open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . 
-	"foomatic-configure -Q -q -s $spooler |" or return undef;
-    my $line;
-    while ($line = <F>) {
-	if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) {
-	    return $1;
-	}
-    }
-    return undef;
-}
-
-sub printer_type() { "LOCAL" }
-
-sub get_spooler () {
-    if (-f "$::prefix$FOOMATIC_DEFAULT_SPOOLER") {
-        my $spool = cat_("$::prefix$FOOMATIC_DEFAULT_SPOOLER");
-	chomp $spool;
-	if ($spool =~ /cups/) {
-	    my ($daemonless_cups, $_remote_cups_server) =
-		printer::main::read_client_conf();
-	    $spool = ($daemonless_cups > 0 ? "rcups" : "cups");
-	}
-	return $spool if $spool =~ /cups|lpd|lprng|pdq/;
-    }
-}
-
-sub set_spooler ($) {
-    my ($printer) = @_;
-    # Mark the default driver in a file
-    output_p("$::prefix$FOOMATIC_DEFAULT_SPOOLER", $printer->{SPOOLER});
-}
-
-
-1;
diff --git a/perl-install/printer/detect.pm b/perl-install/printer/detect.pm
deleted file mode 100644
index 065ac23e1..000000000
--- a/perl-install/printer/detect.pm
+++ /dev/null
@@ -1,534 +0,0 @@
-package printer::detect;
-
-use strict;
-use common;
-use modules;
-use detect_devices;
-use printer::data;
-
-sub local_detect() {
-    modules::any_conf->read->get_probeall("usb-interface") and eval { modules::load($usbprintermodule) };
-    # Reload parallel port modules only when we were not called from the
-    # hotplug script, to avoid the hotplug script running recursively
-    if (!$::noX) {
-	eval { modules::unload(qw(lp parport_pc parport)) }; #- on kernel 2.4 parport has to be unloaded to probe again
-	eval { modules::load(qw(parport_pc lp)) }; #- take care as not available on 2.4 kernel (silent error).
-    }
-    whatPrinter();
-}
-
-sub net_detect { whatNetPrinter(1, 0, @_) }
-
-sub net_smb_detect { whatNetPrinter(0, 1, @_) }
-
-sub detect {
-    local_detect(), whatNetPrinter(1, 1, @_);
-}
-
-
-#-CLASS:PRINTER;
-#-MODEL:HP LaserJet 1100;
-#-MANUFACTURER:Hewlett-Packard;
-#-DESCRIPTION:HP LaserJet 1100 Printer;
-#-COMMAND SET:MLC,PCL,PJL;
-sub whatPrinter() {
-    my @res = (whatParport(), whatUsbport());
-    grep { $_->{val}{CLASS} eq "PRINTER" } @res;
-}
-
-sub whatParport() {
-    my @res;
-    foreach (0..3) {
-	my $elem = {};
-	my $F;
-	open $F, "/proc/parport/$_/autoprobe" or open $F, "/proc/sys/dev/parport/parport$_/autoprobe" or next;
-	{
-	    local $_;
-	    my $itemfound = 0;
-	    while (<$F>) { 
-		if (/(.*):(.*);/) { #-#
-		    $elem->{$1} = $2;
-		    $elem->{$1} =~ s/Hewlett[-\s_]Packard/HP/;
-		    $elem->{$1} =~ s/HEWLETT[-\s_]PACKARD/HP/;
-		    $itemfound = 1;
-		}
-	    }
-	    # Some parallel printers miss the "CLASS" field
-	    $elem->{CLASS} = 'PRINTER' 
-		if $itemfound && !defined($elem->{CLASS});
-	}
-	push @res, { port => "/dev/lp$_", val => $elem };
-    }
-    @res;
-}
-
-sub whatPrinterPort() {
-    grep { detect_devices::tryWrite($_) } qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9);
-}
-
-sub whatUsbport() {
-    # The printer manufacturer and model names obtained with the usb_probe()
-    # function were very messy, once there was a lot of noise around the
-    # manufacturers name ("Inc.", "SA", "International", ...) and second,
-    # all Epson inkjets answered with the name "Epson Stylus Color 760" which
-    # lead many newbies to install their Epson Stylus Photo XXX as an Epson
-    # Stylus Color 760 ...
-    #
-    # This routine based on an ioctl request gives very clean and correct
-    # manufacturer and model names, so that they are easily matched to the
-    # printer entries in the Foomatic database
-    my @res;
-    foreach my $i (0..15) {
-	my $port = "/dev/usb/lp$i";
-	my $realport = devices::make($port);
-	next if !$realport;
-	next if ! -r $realport;
-	foreach my $j (1..3) {
-	    open(my $PORT, $realport) or next;
-	    my $idstr = "";
-	    # Calculation of IOCTL function 0x84005001 (to get device ID
-	    # string):
-	    # len = 1024
-	    # IOCNR_GET_DEVICE_ID = 1
-	    # LPIOC_GET_DEVICE_ID(len) =
-	    #     _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len)
-	    # _IOC(), _IOC_READ as defined in /usr/include/asm/ioctl.h
-	    # Use "eval" so that program does not stop when IOCTL fails
-	    eval { 
-		my $output = "\0" x 1024; 
-		ioctl($PORT, 0x84005001, $output);
-		$idstr = $output;
-	    } or do {
-		close $PORT;
-		next;
-	    };
-	    close $PORT;
-	    # Remove non-printable characters
-	    $idstr =~ tr/[\x00-\x1f]/./;
-	    # If we do not find any item in the ID string, we try to read
-	    # it again
-	    my $itemfound = 0;
-	    # Extract the printer data from the ID string
-	    my ($manufacturer, $model, $serialnumber, $description, $commandset) =
-		    ("", "", "", "", "");
-	    my ($sku);
-	    if ($idstr =~ /CLS:([^;]+);/ || $idstr =~ /CLASS:([^;]+);/) {
-		$itemfound = 1;
-	    }
-	    if ($idstr =~ /MFG:([^;]+);/ || $idstr =~ /MANUFACTURER:([^;]+);/) {
-		$manufacturer = $1;
-		$manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
-		$manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
-		$itemfound = 1;
-	    }
-	    # For HP's multi-function devices the real model name is in the "SKU"
-	    # field. So use this field with priority for $model when it exists.
-	    if ($idstr =~ /MDL:([^;]+);/ || $idstr =~ /MODEL:([^;]+);/) {
-		$model ||= $1;
-		$itemfound = 1;
-	    }
-	    if ($idstr =~ /SKU:([^;]+);/) {
-		$sku = $1;
-		$itemfound = 1;
-	    }
-	    if ($idstr =~ /DES:([^;]+);/ || $idstr =~ /DESCRIPTION:([^;]+);/) {
-		$description = $1;
-		$description =~ s/Hewlett[-\s_]Packard/HP/;
-		$description =~ s/HEWLETT[-\s_]PACKARD/HP/;
-		$itemfound = 1;
-	    }
-	    if (($idstr =~ /SE*R*N:([^;]+);/) ||
-		($idstr =~ /SN:([^;]+);/)) {
-		$serialnumber = $1;
-		$itemfound = 1;
-	    }
-	    if ($idstr =~ /CMD:([^;]+);/ || 
-		$idstr =~ /COMMAND\s*SET:([^;]+);/) {
-		$commandset ||= $1;
-		$itemfound = 1;
-	    }
-	    # Nothing found? Try again if not in the third attempt,
-	    # after the third attempt give up
-	    next if !$itemfound;
-	    # Was there a manufacturer and a model in the string?
-	    if ($manufacturer eq "" || $model eq "") {
-		$manufacturer = "";
-		$model = N("Unknown Model");
-	    }
-	    # No description field? Make one out of manufacturer and model.
-	    if ($description eq "") {
-		$description = "$manufacturer $model";
-	    }
-	    # Store this auto-detection result in the data structure
-	    push @res, { port => $port, val => 
-			 { CLASS => 'PRINTER',
-			   MODEL => $model,
-			   MANUFACTURER => $manufacturer,
-			   DESCRIPTION => $description,
-			   SERIALNUMBER => $serialnumber,
-			   'COMMAND SET' => $commandset,
-			   SKU => $sku
-			   } };
-	    last;
-	}
-    }
-    @res;
-}
-
-sub whatNetPrinter {
-    my ($network, $smb, $timeout) = @_;
-
-    my (@res);
-
-    # Set timeouts for "nmap"
-    $timeout = 4000 if !$timeout;
-    my $irtimeout = $timeout / 2;
-
-    # Which ports should be scanned?
-    my @portstoscan;
-    push @portstoscan, "139" if $smb;
-    push @portstoscan, "4010", "4020", "4030", "5503", "9100-9104" if $network;
-    
-    return () if $#portstoscan < 0;
-    my $portlist = join ",", @portstoscan;
-    
-    # Which hosts should be scanned?
-    # (Applying nmap to a whole network is very time-consuming, because nmap
-    #  waits for a certain timeout period on non-existing hosts, so we get a 
-    #  lists of existing hosts by pinging the broadcast addresses for existing
-    #  hosts and then scanning only them, which is much faster)
-    my @hostips = getIPsInLocalNetworks();
-    return () if $#hostips < 0;
-    my $hostlist = join " ", @hostips;
-
-    # Scan network for printers, the timeout settings are there to avoid
-    # delays caused by machines blocking their ports with a firewall
-    local *F;
-    open F, ($::testing ? "" : "chroot $::prefix/ ") .
-	qq(/bin/sh -c "export LC_ALL=C; nmap -r -P0 --host_timeout $timeout --initial_rtt_timeout $irtimeout -p $portlist $hostlist" 2> /dev/null |)
-	or return @res;
-    my ($host, $ip, $port, $modelinfo) = ("", "", "", "");
-    while (my $line = <F>) {
-	chomp $line;
-
-	# head line of the report of a host with the ports in question open
-	if (($line =~ m/^\s*Interesting\s+ports\s+on\s+(\S*)\s*\((\S+)\)\s*:\s*$/i) ||
-	    ($line =~ m/^\s*Interesting\s+ports\s+on\s+(\S+)\s*:\s*$/i)) {
-	    ($host, $ip) = ($1, $2);
-	    $ip = $host if !$ip;
-	    $host = $ip if $host eq "";
-	    $port = "";
-
-	    undef $modelinfo;
-
-	} elsif ($line =~ m!^\s*(\d+)/\S+\s+open\s+!i) {
-	    next if $ip eq "";
-	    $port = $1;
-	    
-	    # Now we have all info for one printer
-	    # Store this auto-detection result in the data structure
-
-	    # Determine the protocol by the port number
-
-	    # SMB/Windows
-	    if ($port eq "139") {
-		my @shares = getSMBPrinterShares($ip);
-		foreach my $share (@shares) {
-		    push @res, { port => "smb://$host/$share->{name}",
-				 val => { CLASS => 'PRINTER',
-					  MODEL => N("Unknown Model"),
-					  MANUFACTURER => "",
-					  DESCRIPTION => $share->{description},
-					  SERIALNUMBER => ""
-				      }
-			     };
-		}
-	    } else {
-		if (!defined($modelinfo)) {
-		    # SNMP request to auto-detect model
-		    $modelinfo = getSNMPModel($ip);
-		}
-		if (defined($modelinfo)) {
-		    push @res, { port => "socket://$host:$port",
-				 val => $modelinfo
-				 };
-		}
-	    }
-	}
-    }
-    close F;
-    @res;
-}
-
-sub getNetworkInterfaces() {
-
-    # subroutine determines the list of all network interfaces reported
-    # by "ifconfig", except "lo".
-    
-    # Return an empty list if no network is running
-    return () unless network_running();
-    
-    my @interfaces;
-	
-    local *IFCONFIG_OUT;
-    open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") .
-	'/bin/sh -c "export LC_ALL=C; ifconfig" 2> /dev/null |' or return ();
-    while (my $readline = <IFCONFIG_OUT>) {
-	# New entry ...
-	if ($readline =~ /^(\S+)\s/) {
-	    my $dev = $1;
-	    if ($dev ne "lo") {
-		push @interfaces, $dev;
-	    }
-	}
-    }
-    close(IFCONFIG_OUT);
-
-    @interfaces;
-}
-
-sub getIPsOfLocalMachine() {
-
-    # subroutine determines all IPs which point to the local machine,
-    # except 127.0.0.1 (localhost).
-
-    # Return an empty list if no network is running
-    return () unless network_running();
-    
-    # Read the output of "ifconfig" to determine the broadcast addresses of
-    # the local networks
-    my $dev_is_realnet = 0;
-    my @local_ips;
-    my $current_ip = "";
-	
-    local *IFCONFIG_OUT;
-    open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") .
-	'/bin/sh -c "export LC_ALL=C; ifconfig" 2> /dev/null |' or return ();
-    while (my $readline = <IFCONFIG_OUT>) {
-	# New entry ...
-	if ($readline =~ /^(\S+)\s/) {
-	    my $dev = $1;
-	    # ... for a real network (not lo = localhost)
-	    $dev_is_realnet = $dev ne 'lo';
-	    # delete previous address
-	    $current_ip = "";
-	}
-	# Are we in the important line now?
-	if ($readline =~ /\sinet addr:([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\s/) {
-	    # Rip out the IP address
-	    $current_ip = $1;
-	    
-	    # Are we in an entry for a real network?
-	    if ($dev_is_realnet) {
-		# Store current IP address
-		push @local_ips, $current_ip;
-	    }
-	}
-    }
-    close(IFCONFIG_OUT);
-    @local_ips;
-}
-
-sub getIPsInLocalNetworks() {
-
-    # subroutine determines the list of all hosts reachable in the local
-    # networks by means of pinging the broadcast addresses.
-    
-    # Return an empty list if no network is running
-    return () unless network_running();
-    
-    # Read the output of "ifconfig" to determine the broadcast addresses of
-    # the local networks
-    my $dev_is_localnet = 0;
-    my @local_bcasts;
-    my $current_bcast = "";
-	
-    local *IFCONFIG_OUT;
-    open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") .
-	'/bin/sh -c "export LC_ALL=C; ifconfig" 2> /dev/null |' or return ();
-    while (my $readline = <IFCONFIG_OUT>) {
-	# New entry ...
-	if ($readline =~ /^(\S+)\s/) {
-	    my $dev = $1;
-	    # ... for a local network (eth = ethernet, 
-	    #     vmnet = VMWare,
-	    #     ethernet card connected to ISP excluded)?
-	    $dev_is_localnet = $dev =~ /^eth/ || $dev =~ /^vmnet/;
-	    # delete previous address
-	    $current_bcast = "";
-	}
-	# Are we in the important line now?
-	if ($readline =~ /\sBcast:([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\s/) {
-	    # Rip out the broadcast IP address
-	    $current_bcast = $1;
-	    
-	    # Are we in an entry for a local network?
-	    if ($dev_is_localnet == 1) {
-		# Store current IP address
-		push @local_bcasts, $current_bcast;
-	    }
-	}
-    }
-    close(IFCONFIG_OUT);
-
-    my @addresses;
-    # Now ping all broadcast addresses and additionally "nmblookup" the
-    # networks (to find Windows servers which do not answer to ping)
-    foreach my $bcast (@local_bcasts) {
-	local *F;
-	open F, ($::testing ? "" : "chroot $::prefix/ ") . 
-	    qq(/bin/sh -c "export LC_ALL=C; ping -w 1 -b -n $bcast 2> /dev/null | cut -f 4 -d ' ' | sed s/:// | egrep '^[0-9]+\\.[0-9]+\\.[0-9]+\\.[0-9]+' | uniq | sort" |) 
-	    or next;
-	local $_;
-	while (<F>) { chomp; push @addresses, $_ }
-	close F;
-	if (-x "/usr/bin/nmblookup") {
-	    local *F;
-	    open F, ($::testing ? "" : "chroot $::prefix/ ") . 
-		qq(/bin/sh -c "export LC_ALL=C; nmblookup -B $bcast \\* 2> /dev/null | cut -f 1 -d ' ' | egrep '^[0-9]+\\.[0-9]+\\.[0-9]+\\.[0-9]+' | uniq | sort" |)
-		or next;
-	    local $_;
-	    while (<F>) { 
-		chomp;
-		push @addresses, $_ if !(member($_,@addresses));
-	    }
-	}
-    }
-
-    @addresses;
-}
-
-sub getSMBPrinterShares {
-    my ($host) = @_;
-    
-    # SMB request to auto-detect shares
-    local *F;
-    open F, ($::testing ? "" : "chroot $::prefix/ ") .
-	qq(/bin/sh -c "export LC_ALL=C; smbclient -N -L $host" 2> /dev/null |) or return ();
-    my $insharelist = 0;
-    my @shares;
-    while (my $l = <F>) {
-	chomp $l;
-	if ($l =~ /^\s*Sharename\s+Type\s+Comment\s*$/i) {
-	    $insharelist = 1;
-	} elsif ($l =~ /^\s*Server\s+Comment\s*$/i) {
-	    $insharelist = 0;
-	} elsif ($l =~ /^\s*(\S+)\s+Printer\s*(.*)$/i &&
-		 $insharelist) {
-	    my $name = $1;
-	    my $description = $2;
-	    $description =~ s/^(\s*)//;
-	    push @shares, { name => $name, description => $description };
-	}
-    }
-    close F;
-
-    return @shares;
-}
-
-sub getSNMPModel {
-    my ($host) = @_;
-    my $manufacturer = "";
-    my $model = "";
-    my $description = "";
-    my $serialnumber = "";
-    
-    # SNMP request to auto-detect model
-    local *F;
-    open F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
-	qq(/bin/sh -c "scli -v 1 -c 'show printer info' $host" 2> /dev/null |) or
-	return { CLASS => 'PRINTER',
-		 MODEL => N("Unknown Model"),
-		 MANUFACTURER => "",
-		 DESCRIPTION => "",
-		 SERIALNUMBER => ""
-		 };
-    while (my $l = <F>) {
-	chomp $l;
-	if ($l =~ /^\s*Manufacturer:\s*(\S.*)$/i &&
-	    $l =~ /^\s*Vendor:\s*(\S.*)$/i) {
-	    $manufacturer = $1;
-	    $manufacturer =~ s/Hewlett[-\s_]Packard/HP/;
-	    $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/;
-	} elsif ($l =~ /^\s*Model:\s*(\S.*)$/i) {
-	    $model = $1;
-	} elsif ($l =~ /^\s*Description:\s*(\S.*)$/i) {
-	    $description = $1;
-	    $description =~ s/Hewlett[-\s_]Packard/HP/;
-	    $description =~ s/HEWLETT[-\s_]PACKARD/HP/;
-	} elsif ($l =~ /^\s*Serial\s*Number:\s*(\S.*)$/i) {
-	    $serialnumber = $1;
-	}
-    }
-    close F;
-
-    # Was there a manufacturer and a model in the output?
-    # If not, get them from the description
-    if ($manufacturer eq "" || $model eq "") {
-	if ($description =~ /^\s*(\S*)\s+(\S.*)$/) {
-	    $manufacturer = $1 if $manufacturer eq "";
-	    $model = $2 if $model eq "";
-	}
-	# No description field? Make one out of manufacturer and model.
-    } elsif ($description eq "") {
-	$description = "$manufacturer $model";
-    }
-    
-    # We couldn't determine a model
-    $model = N("Unknown Model") if $model eq "";
-    
-    # Remove trailing spaces
-    $manufacturer =~ s/(\S+)\s+$/$1/;
-    $model        =~ s/(\S+)\s+$/$1/;
-    $description  =~ s/(\S+)\s+$/$1/;
-    $serialnumber =~ s/(\S+)\s+$/$1/;
-
-    # Now we have all info for one printer
-    # Store this auto-detection result in the data structure
-    return  { CLASS => 'PRINTER',
-	      MODEL => $model,
-	      MANUFACTURER => $manufacturer,
-	      DESCRIPTION => $description,
-	      SERIALNUMBER => $serialnumber
-	      };
-}
-
-sub network_running() {
-    # If the network is not running return 0, otherwise 1.
-    local *F; 
-    open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . 
-	'/bin/sh -c "export LC_ALL=C; /sbin/ifconfig" 2> /dev/null |' or
-	    die 'Could not run "ifconfig"!';
-    while (my $line = <F>) {
-	if ($line !~ /^lo\s+/ && # The loopback device can have been 
-                                   # started by the spooler's startup script
-	    $line =~ /^(\S+)\s+/) { # In this line starts an entry for a
-	                              # running network
-	    close F;
-	    return 1;
-	}
-    }
-    close F;
-    return 0;
-}
-
-sub parport_addr {
-    # auto-detect the parallel port addresses
-    my ($device) = @_;
-    $device =~ m!^/dev/lp(\d+)$! or
-	$device =~ m!^/dev/printers/(\d+)$!;
-    my $portnumber = $1;
-    my $parport_addresses = 
-	`cat /proc/sys/dev/parport/parport$portnumber/base-addr`;
-    my $address_arg;
-    if ($parport_addresses =~ /^\s*(\d+)\s+(\d+)\s*$/) {
-	$address_arg = sprintf(" -base 0x%x -basehigh 0x%x", $1, $2);
-    } elsif ($parport_addresses =~ /^\s*(\d+)\s*$/) {
-	$address_arg = sprintf(" -base 0x%x", $1);
-    } else {
-	$address_arg = "";
-    }
-    return $address_arg;
-}
-
-1;
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
deleted file mode 100644
index d7eb593fd..000000000
--- a/perl-install/printer/main.pm
+++ /dev/null
@@ -1,3114 +0,0 @@
-package printer::main;
-
-# $Id$
-
-use strict;
-
-use common;
-use run_program;
-use printer::data;
-use printer::services;
-use printer::default;
-use printer::cups;
-use printer::detect;
-use handle_configs;
-use services;
-use lang;
-
-use vars qw(@ISA @EXPORT);
-
-@ISA = qw(Exporter);
-@EXPORT = qw(%printer_type %printer_type_inv);
-
-#-Did we already read the subroutines of /usr/sbin/ptal-init?
-my $ptalinitread = 0;
-
-our %printer_type = (
-    N("Local printer")                              => "LOCAL",
-    N("Remote printer")                             => "REMOTE",
-    N("Printer on remote CUPS server")              => "CUPS",
-    N("Printer on remote lpd server")               => "LPD",
-    N("Network printer (TCP/Socket)")               => "SOCKET",
-    N("Printer on SMB/Windows 95/98/NT server")     => "SMB",
-    N("Printer on NetWare server")                  => "NCP",
-    N("Enter a printer device URI")                 => "URI",
-    N("Pipe job into a command")                    => "POSTPIPE"
-);
-
-our %printer_type_inv = reverse %printer_type;
-
-our %thedb;
-
-our $hplipdevicesdb;
-
-# Translation of the "(recommended)" in printer driver entries
-our $recstr = N("recommended");
-our $precstr = "($recstr)";
-our $sprecstr = quotemeta($precstr);
-
-#------------------------------------------------------------------------------
-
-sub spooler() {
-    # LPD is taken from the menu for the moment because the classic LPD is
-    # highly unsecure. Depending on how the GNU lpr development is going on
-    # LPD support can be reactivated by uncommenting the following line.
-
-    #return @spooler_inv{qw(cups lpd lprng pdq)};
-
-    # LPRng is not officially supported any more since version 9.0 of
-    # this distribution, so show it only in the spooler menu when it
-    # was manually installed.
-
-    # PDQ is not officially supported any more since version 9.1, so
-    # show it only in the spooler menu when it was manually installed.
-
-    return map { $spoolers{$_}{long_name} } ('cups', 'rcups' , 
-    if_(files_exist(qw(/usr/bin/pdq)), 'pdq'),
-    if_(files_exist(qw(/usr/lib/filters/lpf /usr/sbin/lpd)), 'lprng'));
-}
-
-sub printer_type($) {
-    my ($printer) = @_;
-    for ($printer->{SPOOLER}) {
-	/cups/  and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB), if_($printer->{expert}, qw(URI))};
-	/lpd/   and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($printer->{expert}, qw(POSTPIPE URI))};
-	/lprng/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($printer->{expert}, qw(POSTPIPE URI))};
-	/pdq/   and return @printer_type_inv{qw(LOCAL LPD SOCKET), if_($printer->{expert}, qw(URI))};
-	/rcups/ and return ();
-    }
-}
-
-sub SIGHUP_daemon {
-    my ($service) = @_;
-    if ($service eq "cupsd") { $service = "cups" };
-    # PDQ and remote CUPS have no daemons, exit.
-    if (($service eq "pdq") || ($service eq "rcups")) { return 1 };
-    # CUPS needs auto-correction for its configuration
-    run_program::rooted($::prefix, "/usr/sbin/correctcupsconfig") if $service eq "cups";
-    # Name of the daemon
-    my %daemons = (
-			    "lpr" => "lpd",
-			    "lpd" => "lpd",
-			    "lprng" => "lpd",
-			    "cups" => "cupsd",
-			    "devfs" => "devfsd",
-			    );
-    my $daemon = $daemons{$service};
-    $daemon = $service unless defined $daemon;
-#    if ($service eq "cups") {
-#	# The current CUPS (1.1.13) dies on SIGHUP, do the normal restart.
-#	printer::services::restart($service);
-#	# CUPS needs some time to come up.
-#	printer::services::wait_for_cups();
-#    } else {
-
-    # Send the SIGHUP
-    run_program::rooted($::prefix, "/usr/bin/killall", "-HUP", $daemon);
-    if ($service eq "cups") {
-	# CUPS needs some time to come up.
-	printer::services::wait_for_cups();
-    }
-
-    return 1;
-}
-
-
-sub assure_device_is_available_for_cups {
-    # Checks whether CUPS already "knows" a certain port, it does not
-    # know it usually when the appropriate kernel module is loaded
-    # after CUPS was started or when the printer is turned on after
-    # CUPS was started. CUPS 1.1.12 and newer refuses to set up queues
-    # on devices which it does not know, it points these queues to
-    # file:/dev/null instead. Restart CUPS if necessary to assure that
-    # CUPS knows the device.
-    my ($device) = @_;
-    my $sdevice = handle_configs::searchstr($device);
-    my ($result, $i);
-    # USB printers get special model-dependent URLs in "lpinfo -v" here
-    # checking is complicated, so we simply restart CUPS then and ready.
-    if ($device =~ /usb/) {
-	$result = printer::services::restart("cups");
-	return 1;
-    }
-    my $maxattempts = 3;
-    for ($i = 0; $i < $maxattempts; $i++) {
-	open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
-	    '/bin/sh -c "export LC_ALL=C; /usr/sbin/lpinfo -v" |') or
-	    die 'Could not run "lpinfo"!';
-	while (my $line = <$F>) {
-	    if ($line =~ /$sdevice/) { # Found a line containing the device
-		                       # name, so CUPS knows it.
-		close $F;
-		return 1;
-	    }
-	}
-	close $F;
-	$result = printer::services::restart("cups");
-    }
-    return $result;
-}
-
-
-sub spooler_in_security_level {
-    # Was the current spooler already added to the current security level?
-    my ($spooler, $level) = @_;
-    my $sp;
-    $sp = $spooler eq "lpr" || $spooler eq "lprng" ? "lpd" : $spooler;
-    my $file = "$::prefix/etc/security/msec/server.$level";
-    if (-f $file) {
-	open(my $F, "< $file") or return 0;
-	while (my $line = <$F>) {
-	    if ($line =~ /^\s*$sp\s*$/) {
-		close $F;
-		return 1;
-	    }
-	}
-	close $F;
-    }
-    return 0;
-}
-
-sub add_spooler_to_security_level {
-    my ($spooler, $level) = @_;
-    my $sp;
-    $sp = $spooler eq "lpr" || $spooler eq "lprng" ? "lpd" : $spooler;
-    my $file = "$::prefix/etc/security/msec/server.$level";
-    if (-f $file) {
-	   eval { append_to_file($file, "$sp\n") } or return 0;
-    }
-    return 1;
-}
-
-sub pdq_panic_button {
-    my $setting = $_[0];
-    if (-f "$::prefix/usr/sbin/pdqpanicbutton") {
-        run_program::rooted($::prefix, "/usr/sbin/pdqpanicbutton", "--$setting")
-	    or die "Could not $setting PDQ panic buttons!";
-    }
-}
-
-sub copy_printer_params($$) {
-    my ($from, $to) = @_;
-    map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from; 
-    #- avoid cycles-----------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-}
-
-sub getinfo($) {
-    my ($prefix) = @_;
-    my $printer = {};
-
-    $::prefix = $prefix;
-
-    # Initialize $printer data structure
-    resetinfo($printer);
-
-    return $printer;
-}
-
-#------------------------------------------------------------------------------
-sub resetinfo($) {
-    my ($printer) = @_;
-    $printer->{QUEUE} = "";
-    $printer->{OLD_QUEUE} = "";
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{DEFAULT} = "";
-    $printer->{currentqueue} = {};
-    # -check which printing system was used previously and load the information
-    # -about its queues
-    read_configured_queues($printer);
-}
-
-sub read_configured_queues($) {
-    my ($printer) = @_;
-    my @QUEUES;
-    # Get the default spooler choice from the config file
-    $printer->{SPOOLER} ||= printer::default::get_spooler();
-    if (!$printer->{SPOOLER}) {
-	#- Find the first spooler where there are queues
-	foreach my $spooler (qw(rcups cups pdq lprng lpd)) {
-	    #- Is the spooler's daemon running?
-	    my $service = $spooler;
-	    if ($service eq "lprng") {
-		$service = "lpd";
-	    }
-	    if (($service ne "pdq") && ($service ne "rcups")) {
-		next unless services::is_service_running($service);
-		# daemon is running, spooler found
-		$printer->{SPOOLER} = $spooler;
-	    }
-	    #- poll queue info
-	    if ($service ne "rcups") {
-		open(my $F, ($::testing ? 
-			     $::prefix : "chroot $::prefix/ ") .
-		     "foomatic-configure -P -q -s $spooler |") or
-		     die "Could not run foomatic-configure";
-		eval join('', <$F>);
-		close $F;
-	    }
-	    if ($service eq "pdq") {
-		#- Have we found queues? PDQ has no damon, so we consider
-		#- it in use when there are defined printer queues
-		if ($#QUEUES != -1) {
-		    $printer->{SPOOLER} = $spooler;
-		    last;
-		}
-	    } elsif ($service eq "rcups") {
-		#- In daemon-less CUPS mode there are no local queues,
-		#- we can only recognize it by a server entry in
-		#- /etc/cups/client.conf
-		my ($daemonless_cups, $remote_cups_server) =
-		    printer::main::read_client_conf();
-		if ($daemonless_cups) {
-		    $printer->{SPOOLER} = $spooler;
-		    $printer->{remote_cups_server} = $remote_cups_server;
-		    last;
-		}
-	    } else {
-		#- For other spoolers we have already found a running
-		#- daemon when we have arrived here
-		last;
-	    }
-	}
-    } else {
-	if ($printer->{SPOOLER} ne "rcups") {
-	    #- Poll the queues of the current default spooler
-	    open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
-		 "foomatic-configure -P -q -s $printer->{SPOOLER} -r |") or
-		 die "Could not run foomatic-configure";
-	    eval join('', <$F>);
-	    close $F;
-	} else {
-	    my ($_daemonless_cups, $remote_cups_server) =
-		printer::main::read_client_conf();
-	    $printer->{remote_cups_server} = $remote_cups_server;
-	}
-    }
-    $printer->{configured} = {};
-    my $i;
-    my $N = $#QUEUES + 1;
-    for ($i = 0;  $i < $N; $i++) {
-	# Set the default printer
-	$printer->{DEFAULT} = $QUEUES[$i]{queuedata}{queue} if
-	    $QUEUES[$i]{queuedata}{default};
-	# Advance to the next entry if the current is a remotely defined
-	# printer
-	next if $QUEUES[$i]{queuedata}{remote};
-	# Add an entry for a locally defined queue
-	$printer->{configured}{$QUEUES[$i]{queuedata}{queue}} = 
-	    $QUEUES[$i];
-	if (!$QUEUES[$i]{make} || !$QUEUES[$i]{model}) {
-	    if ($printer->{SPOOLER} eq "cups") {
-		$printer->{OLD_QUEUE} = $QUEUES[$i]{queuedata}{queue};
-		my $descr = get_descr_from_ppd($printer);
-		if ($descr =~ m/^([^\|]*)\|([^\|]*)(\|.*|)$/) {
-		    $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= $1;
-		    $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= $2;
-	        }
-		# Read out which PPD file was originally used to set up this
-		# queue
-		if (open(my $F, "< $::prefix/etc/cups/ppd/$QUEUES[$i]{queuedata}{queue}.ppd")) {
-		    while (my $line = <$F>) {
-			if ($line =~ /^\*%MDKMODELCHOICE:(.+)$/) {
-			    $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = $1;
-			}
-		    }
-		    close $F;
-		}
-		# Mark that we have a CUPS queue but do not know the name
-		# the PPD file in /usr/share/cups/model
-		if ((!$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd}) &&
-		    (! -r $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd})) {
-		    $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = '1';
-		}
-		$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{driver} = 'PPD';
-		$printer->{OLD_QUEUE} = "";
-	    }
-	    $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= "";
-	    $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= N("Unknown model");
-	} else {
-	    $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} = $QUEUES[$i]{make};
-	    $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} = $QUEUES[$i]{model};
-	}
-	# Fill in "options" field
-	if (my $args = $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{args}) {
-	    my @options;
-	    foreach my $arg (@$args) {
-		push(@options, "-o");
-		my $optstr = $arg->{name} . "=" . $arg->{default};
-		push(@options, $optstr);
-	    }
-	    @{$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{options}} = @options;
-	}
-	# Construct an entry line for tree view in main window of
-	# printerdrake
-	make_menuentry($printer, $QUEUES[$i]{queuedata}{queue});
-    }
-}
-
-sub make_menuentry {
-    my ($printer, $queue) = @_;
-    my $spooler = $spoolers{$printer->{SPOOLER}}{short_name};
-    my $connect = $printer->{configured}{$queue}{queuedata}{connect};
-    my $localremote = N("Configured on this machine");
-    my $make = $printer->{configured}{$queue}{queuedata}{make};
-    my $model = $printer->{configured}{$queue}{queuedata}{model};
-    my $connection;
-    if ($connect =~ m!^(file|parallel):/dev/lp(\d+)$!) {
-	my $number = $2;
-	$connection = N(" on parallel port #%s", $number);
-    } elsif ($connect =~ m!^(file|usb):/dev/usb/lp(\d+)$!) {
-	my $number = $2;
-	$connection = N(", USB printer #%s", $number);
-    } elsif ($connect =~ m!^usb://!) {
-	$connection = N(", USB printer");
-    } elsif ($connect =~ m!^hp:/(.+?)$!) {
-	my $hplipdevice = $1;
-	if ($hplipdevice =~ m!^par/!) {
-	    $connection = N(", HP printer on a parallel port");
-	} elsif ($hplipdevice =~ m!^usb/!) {
-	    $connection = N(", HP printer on USB");
-	} elsif ($hplipdevice =~ m!^net/!) {
-	    $connection = N(", HP printer on HP JetDirect");
-	} else {
-	    $connection = N(", HP printer");
-	}
-    } elsif ($connect =~ m!^ptal://?(.+?)$!) {
-	my $ptaldevice = $1;
-	if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
-	    my $number = $1;
-	    $connection = N(", multi-function device on parallel port #%s",
-			    $number);
-	} elsif ($ptaldevice =~ /^mlc:par:/) {
-	    $connection = N(", multi-function device on a parallel port");
-	} elsif ($ptaldevice =~ /^mlc:usb:/) {
-	    $connection = N(", multi-function device on USB");
-	} elsif ($ptaldevice =~ /^hpjd:/) {
-	    $connection = N(", multi-function device on HP JetDirect");
-	} else {
-	    $connection = N(", multi-function device");
-	}
-    } elsif ($connect =~ m!^file:(.+)$!) {
-        my $file = $1;
-	$connection = N(", printing to %s", $file);
-    } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) {
-        my ($server, $printer) = ($1, $2);
-	$connection = N(" on LPD server \"%s\", printer \"%s\"", $server, $printer);
-    } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) {
-        my ($host, $port) = ($1, $2);
-	$connection = N(", TCP/IP host \"%s\", port %s", $host, $port);
-    } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! ||
-	     $connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$! ||
-	     $connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!) {
-        my ($server, $share) = ($1, $2);
-	$connection = N(" on SMB/Windows server \"%s\", share \"%s\"", $server, $share);
-    } elsif ($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$! ||
-	     $connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$! ||
-	     $connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!) {
-        my ($server, $printer) = ($1, $2);
-	$connection = N(" on Novell server \"%s\", printer \"%s\"", $server, $printer);
-    } elsif ($connect =~ m!^postpipe:(.+)$!) {
-        my $command = $1;
-	$connection = N(", using command %s", $command);
-    } else {
-	$connection = ($printer->{expert} ? ", URI: $connect" : "");
-    }
-    my $sep = "!";
-    $printer->{configured}{$queue}{queuedata}{menuentry} = 
-	($printer->{expert} ? "$spooler$sep" : "") .
-	"$localremote$sep$queue: $make $model$connection";
-}
-
-sub connectionstr {
-    my ($connect) = @_;
-    my $connection;
-    if ($connect =~ m!^(file|parallel):/dev/lp(\d+)$!) {
-	my $number = $2;
-	$connection = N("Parallel port #%s", $number);
-    } elsif ($connect =~ m!^(file|usb):/dev/usb/lp(\d+)$!) {
-	my $number = $2;
-	$connection = N("USB printer #%s", $number);
-    } elsif ($connect =~ m!^usb://!) {
-	$connection = N("USB printer");
-    } elsif ($connect =~ m!^hp:/(.+?)$!) {
-	my $hplipdevice = $1;
-	if ($hplipdevice =~ m!^par/!) {
-	    $connection = N("HP printer on a parallel port");
-	} elsif ($hplipdevice =~ m!^usb/!) {
-	    $connection = N("HP printer on USB");
-	} elsif ($hplipdevice =~ m!^net/!) {
-	    $connection = N("HP printer on HP JetDirect");
-	} else {
-	    $connection = N("HP printer");
-	}
-    } elsif ($connect =~ m!^ptal://?(.+?)$!) {
-	my $ptaldevice = $1;
-	if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
-	    my $number = $1;
-	    $connection = N("Multi-function device on parallel port #%s",
-			    $number);
-	} elsif ($ptaldevice =~ /^mlc:par:/) {
-	    $connection = N("Multi-function device on a parallel port");
-	} elsif ($ptaldevice =~ /^mlc:usb:/) {
-	    $connection = N("Multi-function device on USB");
-	} elsif ($ptaldevice =~ /^hpjd:/) {
-	    $connection = N("Multi-function device on HP JetDirect");
-	} else {
-	    $connection = N("Multi-function device");
-	}
-    } elsif ($connect =~ m!^file:(.+)$!) {
-        my $file = $1;
-	$connection = N("Prints into %s", $file);
-    } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) {
-        my ($server, $port) = ($1, $2);
-	$connection = N("LPD server \"%s\", printer \"%s\"", $server, $port);
-    } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) {
-        my ($host, $port) = ($1, $2);
-        $connection = N("TCP/IP host \"%s\", port %s", $host, $port);
-    } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! ||
-	     $connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$! ||
-	     $connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!) {
-        my ($server, $share) = ($1, $2);
-	$connection = N("SMB/Windows server \"%s\", share \"%s\"", $server, $share);
-    } elsif ($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$! ||
-	     $connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$! ||
-	     $connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!) {
-        my ($server, $share) = ($1, $2);
-	$connection = N("Novell server \"%s\", printer \"%s\"", $server, $share);
-    } elsif ($connect =~ m!^postpipe:(.+)$!) {
-        my $command = $1;
-	$connection = N("Uses command %s", $command);
-    } else {
-	$connection = N("URI: %s", $connect);
-    }
-    return $connection;
-}
-
-sub read_printer_db {
-
-    my ($printer, $spooler) = @_;
-
-    # No local queues available in daemon-less CUPS mode
-    return 1 if $spooler eq "rcups";
-
-    my $DBPATH; #- do not have to do close ... and do not modify globals at least
-    # Generate the Foomatic printer/driver overview, read it from the
-    # appropriate file when it is already generated
-    open($DBPATH, ($::testing ? $::prefix : "chroot $::prefix/ ") . #-#
-	"foomatic-configure -O -q |") or
-	die "Could not run foomatic-configure";
-
-    my $entry = {};
-    my $inentry = 0;
-    my $indrivers = 0;
-    my $inautodetect = 0;
-    my $autodetecttype = "";
-    local $_;
-    while (<$DBPATH>) {
-	chomp;
-	if ($inentry) {
-	    # We are inside a printer entry
-	    if ($indrivers) {
-		# We are inside the drivers block of a printers entry
-		if (m!^\s*</drivers>\s*$!) {
-		    # End of drivers block
-		    $indrivers = 0;
-		} elsif (m!^\s*<driver>(.+)</driver>\s*$!) {
-		    push @{$entry->{drivers}}, $1;
-		}
-	    } elsif ($inautodetect) {
-		# We are inside the autodetect block of a printers entry
-		# All entries inside this block will be ignored
-		if ($autodetecttype) {
-		    if (m!^.*</$autodetecttype>\s*$!) {
-			# End of general, parallel, USB, or SNMP section
-			$autodetecttype = "";
-		    } elsif (m!^\s*<manufacturer>\s*([^<>]+)\s*</manufacturer>\s*$!) {
-			# Manufacturer
-			$entry->{devidmake} = $1;
-		    } elsif (m!^\s*<model>\s*([^<>]+)\s*</model>\s*$!) {
-			# Model
-			$entry->{devidmodel} = $1;
-		    } elsif (m!^\s*<description>\s*([^<>]+)\s*</description>\s*$!) {
-			# Description
-			$entry->{deviddesc} = $1;
-		    } elsif (m!^\s*<commandset>\s*([^<>]+)\s*</commandset>\s*$!) {
-			# Command set
-			$entry->{devidcmdset} = $1;
-		    } elsif (m!^\s*<ieee1284>\s*([^<>]+)\s*</ieee1284>\s*$!) {
-			# Full ID string
-			my $idstr = $1;
-			$idstr =~ m!(MFG|MANUFACTURER):([^;]+);!i
-			    and $entry->{devidmake} = $2;
-			$idstr =~ m!(MDL|MODEL):([^;]+);!i
-			    and $entry->{devidmodel} = $2;
-			$idstr =~ m!(DES|DESCRIPTION):([^;]+);!i
-			    and $entry->{deviddesc} = $2;
-			$idstr =~ m!(CMD|COMMAND\s*SET):([^;]+);!i
-			    and $entry->{devidcmdset} = $2;
-		    }
-		} else {
-		    if (m!^.*</autodetect>\s*$!) {
-			# End of autodetect block
-			$inautodetect = 0;
-		    } elsif (m!^\s*<(general|parallel|usb|snmp)>\s*$!) {
-			# Beginning of parallel, USB, or SNMP section
-			$autodetecttype = $1;
-		    }
-		}
-	    } else {
-		if (m!^\s*</printer>\s*$!) {
-		    # entry completed
-		    $inentry = 0;
-		    # Expert mode:
-		    # Make one database entry per driver with the entry name
-		    # manufacturer|model|driver
-		    if ($printer->{expert}) {
-			foreach my $driver (@{$entry->{drivers}}) {
-			    my $driverstr;
-			    if ($driver eq "Postscript") {
-				$driverstr = "PostScript";
-			    } else {
-				$driverstr = "GhostScript + $driver";
-			    }
-			    if ($driver eq $entry->{defaultdriver}) {
-				$driverstr .= " $precstr";
-			    }
-			    $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr";
-			    $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i;
-			    $entry->{ENTRY} =~ 
-				s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
-			    $entry->{driver} = $driver;
-			    # Duplicate contents of $entry because it is multiply entered to the database
-			    map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
-			}
-		    } else {
-			# Recommended mode
-			# Make one entry per printer, with the recommended
-			# driver (manufacturerer|model)
-			$entry->{ENTRY} = "$entry->{make}|$entry->{model}";
-			$entry->{ENTRY} =~ s/^CITOH/C.ITOH/i;
-			$entry->{ENTRY} =~ 
-			    s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
-			if ($entry->{defaultdriver}) {
-			    $entry->{driver} = $entry->{defaultdriver};
-			    map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry;
-			}
-		    }
-		    $entry = {};
-		} elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) {
-		    # Foomatic printer ID
-		    $entry->{printer} = $1;
-		} elsif (m!^\s*<make>(.+)</make>\s*$!) {
-		    # Printer manufacturer
-		    $entry->{make} = uc($1);
-		} elsif (m!^\s*<model>(.+)</model>\s*$!) {
-		    # Printer model
-		    $entry->{model} = $1;
-		} elsif (m!<driver>(.+)</driver>!) {
-		    # Printer default driver
-		    $entry->{defaultdriver} = $1;
-		} elsif (m!^\s*<drivers>\s*$!) {
-		    # Drivers block
-		    $indrivers = 1;
-		    @{$entry->{drivers}} = (); 
-		} elsif (m!^\s*<autodetect>\s*$!) {
-		    # Autodetect block
-		    $inautodetect = 1;
-		}
-	    }
-	} else {
-	    if (m!^\s*<printer>\s*$!) {
-		# new entry
-		$inentry = 1;
-	    }
-	}
-    }
-    close $DBPATH;
-
-    # Add raw queue
-    $entry->{ENTRY} = N("Raw printer (No driver)");
-    $entry->{driver} = "raw";
-    $entry->{make} = "";
-    $entry->{model} = N("Unknown model");
-    $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} foreach keys %$entry;
-
-    #- Load CUPS driver database if CUPS is used as spooler
-    if ($spooler && $spooler eq "cups") {
-        poll_ppd_base($printer);
-    }
-
-    #my @entries_db_short     = sort keys %printer::thedb;
-    #%descr_to_db          = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short;
-    #%descr_to_help        = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short;
-    #@entry_db_description = keys %descr_to_db;
-    #db_to_descr          = reverse %descr_to_db;
-
-}
-
-sub read_foomatic_options ($) {
-    my ($printer) = @_;
-    # Generate the option data for the chosen printer/driver combo
-    my $COMBODATA;
-    open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . 
-	"foomatic-configure -P -q -p $printer->{currentqueue}{printer}" .
-	" -d $printer->{currentqueue}{driver}" . 
-	($printer->{OLD_QUEUE} ?
-	 " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
-	 ($printer->{SPECIAL_OPTIONS} ?
-	  " $printer->{SPECIAL_OPTIONS}" : "") 
-	 . " |") or
-	 die "Could not run foomatic-configure";
-    eval join('', (<$F>)); 
-    close $F;
-    # Return the arguments field
-    return $COMBODATA->{args};
-}
-
-sub read_ppd_options ($) {
-    my ($printer) = @_;
-    # Generate the option data for a given PPD file
-    my $COMBODATA;
-    open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . 
-	"foomatic-configure -P -q" .
-	 if_($printer->{currentqueue}{ppd} &&
-	     ($printer->{currentqueue}{ppd} ne '1'),
-	     " --ppd " . ($printer->{currentqueue}{ppd} !~ m!^/! ?
-			    "/usr/share/cups/model/" : "") .
-			   $printer->{currentqueue}{ppd}) .
-	($printer->{OLD_QUEUE} ?
-	 " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") .
-	 ($printer->{SPECIAL_OPTIONS} ?
-	  " $printer->{SPECIAL_OPTIONS}" : "") 
-		    . " |") or
-	    die "Could not run foomatic-configure";
-    eval join('', (<$F>));
-    close $F;
-    # Return the arguments field
-    return $COMBODATA->{args};
-}
-
-my %sysconfig = getVarsFromSh("$::prefix/etc/sysconfig/printing");
-
-sub set_cups_special_options {
-    my ($queue) = @_;
-    # Set some special CUPS options
-    my @lpoptions = chomp_(cat_("$::prefix/etc/cups/lpoptions"));
-    # If nothing is already configured, set text file borders of half an inch
-    # and decrease the font size a little bit, so nothing of the text gets
-    # cut off by unprintable borders.
-    if (!any { /$queue.*\s(page-(top|bottom|left|right)|lpi|cpi)=/ } @lpoptions) {
-	run_program::rooted($::prefix, "lpoptions",
-			    "-p", $queue,
-			    "-o", "page-top=36", "-o", "page-bottom=36",
-			    "-o", "page-left=36", "-o page-right=36",
-			    "-o", "cpi=12", "-o", "lpi=7", "-o", "wrap");
-    }
-    # Let images fill the whole page by default
-    if (!any { /$queue.*\s(scaling|natural-scaling|ppi)=/ } @lpoptions) {
-	run_program::rooted($::prefix, "lpoptions",
-			    "-p", $queue,
-			    "-o", "scaling=100");
-    }
-    return 1;
-}
-
-sub set_cups_autoconf {
-    my ($autoconf) = @_;
-    $sysconfig{CUPS_CONFIG} = $autoconf ? "automatic" : "manual";
-    setVarsInSh("$::prefix/etc/sysconfig/printing", \%sysconfig);
-    # Restart CUPS
-    printer::services::restart("cups") if $autoconf;
-    return 1;
-}
-
-sub get_cups_autoconf() { $sysconfig{CUPS_CONFIG} ne 'manual' ? 1 : 0 }
-
-sub set_usermode {
-    my ($usermode) = @_;
-    $sysconfig{USER_MODE} = $usermode ? "expert" : "recommended";
-    setVarsInSh("$::prefix/etc/sysconfig/printing", \%sysconfig) if !$::testing;
-    return $usermode;
-}
-
-sub get_usermode() { $sysconfig{USER_MODE} eq 'expert' ? 1 : 0 }
-
-sub set_jap_textmode {
-    my $textmode = ($_[0] ? 'cjk' : '');
-    # Do not write mime.convs if the file does not exist, as then
-    # CUPS is not installed and the created mime.convs will be broken.
-    # When installing CUPS later it will not work.
-    return 1 if (! -r "$::prefix/etc/cups/mime.convs");
-    substInFile {
-        s!^(\s*text/plain\s+\S+\s+\d+\s+)\S+(\s*$)!$1${textmode}texttops$2!        
-    } "$::prefix/etc/cups/mime.convs";
-    return 1;
-}
-
-sub get_jap_textmode() {
-    my @mimeconvs = cat_("$::prefix/etc/cups/mime.convs");
-    (m!^\s*text/plain\s+\S+\s+\d+\s+(\S+)\s*$!m and
-     $1 eq 'cjktexttops' and return 1) foreach @mimeconvs;
-    return 0;
-}
-
-#----------------------------------------------------------------------
-# Handling of /etc/cups/cupsd.conf
-
-sub read_cupsd_conf() {
-    # If /etc/cups/cupsd.conf a default cupsd.conf will be put out to avoid
-    # writing of a broken cupsd.conf file when we write it back later.
-    my @cupsd_conf = cat_("$::prefix/etc/cups/cupsd.conf");
-    if (!@cupsd_conf) {
-	@cupsd_conf = map { /\n$/s or "$_\n" } split('\n',
-'LogLevel info
-TempDir /var/spool/cups/tmp
-Port 631
-Browsing On
-BrowseAddress @LOCAL
-BrowseDeny All
-BrowseAllow 127.0.0.1
-BrowseAllow @LOCAL
-BrowseOrder deny,allow
-<Location />
-Order Deny,Allow
-Deny From All
-Allow From 127.0.0.1
-Allow From @LOCAL
-</Location>
-<Location /admin>
-AuthType Basic
-AuthClass System
-Order Deny,Allow
-Deny From All
-Allow From 127.0.0.1
-</Location>
-');
-    }
-    return @cupsd_conf;
-}
-
-sub write_cupsd_conf {
-    my (@cupsd_conf) = @_;
-    # Do not write cupsd.conf if the file does not exist, as then
-    # CUPS is not installed and the created cupsd.conf will be broken.
-    # When installing CUPS later it will not start.
-    return 1 if (! -r "$::prefix/etc/cups/cupsd.conf");
-    output("$::prefix/etc/cups/cupsd.conf", @cupsd_conf);
-}
-
-sub read_location {
-
-    # Return the lines inside the [path] location block
-    #
-    #   <Location [path]>
-    #   ...
-    #   </Location>
-
-    my ($cupsd_conf_ptr, $path) = @_;
-
-    my @result;
-    if (any { m!^\s*<Location\s+$path\s*>! } @$cupsd_conf_ptr) {
-	my $location_start = -1;
-	my $location_end = -1;
-	# Go through all the lines, bail out when start and end line found
-	for (my $i = 0; 
-	     $i <= $#{$cupsd_conf_ptr} && $location_end == -1;
-	     $i++) {
-	    if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) {
-		# Start line of block
-		$location_start = $i;
-	    } elsif ($cupsd_conf_ptr->[$i] =~ 
-		      m!^\s*<\s*/Location\s*>! &&
-		     $location_start != -1) {
-		# End line of block
-		$location_end = $i;
-		last;
-	    } elsif ($location_start >= 0 && $location_end < 0) {
-		# Inside the location block
-		push(@result, $cupsd_conf_ptr->[$i]);
-	    }
-	}
-    } else {
-	# If there is no root location block, set the result array to
-	# "undef"
-	@result = undef;
-    }
-    return @result;
-}
-
-sub rip_location {
-
-    # Cut out the [path]  location block
-    #
-    #   <Location [path]>
-    #   ...
-    #   </Location>
-    #
-    # so that it can be treated seperately without affecting the
-    # rest of the file
-
-    my ($cupsd_conf_ptr, $path) = @_;
-
-    my @location;
-    my $location_start = -1;
-    my $location_end = -1;
-    if (any { m!^\s*<Location\s+$path\s*>! } @$cupsd_conf_ptr) {
-	# Go through all the lines, bail out when start and end line found
-	for (my $i = 0; 
-	     $i <= $#{$cupsd_conf_ptr} && $location_end == -1;
-	     $i++) {
-	    if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) {
-		# Start line of block
-		$location_start = $i;
-	    } elsif ($cupsd_conf_ptr->[$i] =~ 
-		      m!^\s*<\s*/Location\s*>! &&
-		     $location_start != -1) {
-		# End line of block
-		$location_end = $i;
-		last;
-	    }
-	}
-	# Rip out the block and store it seperately
-	@location = 
-	    splice(@$cupsd_conf_ptr, $location_start,
-		   $location_end - $location_start + 1);
-    } else {
-	# If there is no location block, create one
-	$location_start = $#{$cupsd_conf_ptr} + 1;
-	@location = ("<Location $path>\n", "</Location>\n");
-    }
-
-    return $location_start, @location;
-}
-
-sub insert_location {
-
-    # Re-insert a location block ripped with "rip_location"
-
-    my ($cupsd_conf_ptr, $location_start, @location) = @_;
-
-    splice(@$cupsd_conf_ptr, $location_start,0,@location);
-}
-
-sub add_to_location {
-
-    # Add a directive to a given location (only if it is not already there)
-
-    my ($cupsd_conf_ptr, $path, $directive) = @_;
-
-    my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path);
-    my $success = handle_configs::insert_directive(\@location, $directive);
-    insert_location($cupsd_conf_ptr, $location_start, @location);
-    return $success;
-}
-
-sub remove_from_location {
-
-    # Remove a directive from a given location
-
-    my ($cupsd_conf_ptr, $path, $directive) = @_;
-
-    my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path);
-    my $success = handle_configs::remove_directive(\@location, $directive);
-    insert_location($cupsd_conf_ptr, $location_start, @location);
-    return $success;
-}
-
-sub replace_in_location {
-
-    # Replace a directive in a given location
-
-    my ($cupsd_conf_ptr, $path, $olddirective, $newdirective) = @_;
-
-    my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path);
-    my $success = handle_configs::replace_directive(\@location, 
-						    $olddirective, 
-						    $newdirective);
-    insert_location($cupsd_conf_ptr, $location_start, @location);
-    return $success;
-}
-
-sub add_allowed_host {
-
-    # Add a host or network which should get access to the local printer(s)
-    my ($cupsd_conf_ptr, $host) = @_;
-    
-    return (handle_configs::insert_directive($cupsd_conf_ptr, 
-					     "BrowseAddress $host") and
-	    add_to_location($cupsd_conf_ptr, "/", "Allow From $host"));
-}
-
-sub remove_allowed_host {
-
-    # Remove a host or network which should get access to the local 
-    # printer(s)
-    my ($cupsd_conf_ptr, $host) = @_;
-    
-    return (handle_configs::remove_directive($cupsd_conf_ptr, "BrowseAddress $host") and
-	    remove_from_location($cupsd_conf_ptr, "/",
-				 "Allow From $host"));
-}
-
-sub replace_allowed_host {
-
-    # Remove a host or network which should get access to the local 
-    # printer(s)
-    my ($cupsd_conf_ptr, $oldhost, $newhost) = @_;
-    
-    return (handle_configs::replace_directive($cupsd_conf_ptr,
-					      "BrowseAddress $oldhost",
-					      "BrowseAddress $newhost") and
-	    replace_in_location($cupsd_conf_ptr, "/", "Allow From $newhost",
-				"Allow From $newhost"));
-}
-
-sub broadcastaddress {
-    
-    # Determines the broadcast address (for "BrowseAddress" line) for
-    # a given network IP
-
-    my ($address) = @_;
-
-    if ($address =~ /^\d+\.\*$/) {
-	$address =~ s/\*$/255.255.255/;
-    } elsif ($address =~ /^\d+\.\d+\.\*$/) {
-	$address =~ s/\*$/255.255/;
-    } elsif ($address =~ /^\d+\.\d+\.\d+\.\*$/) {
-	$address =~ s/\*$/255/;
-    } elsif ($address =~ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)$!) {
-	my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4;
-	my $mask = ((1 << $5) - 1) << (32 - $5);
-	my $broadcast = $numadr | (~$mask);
-	$address =
-	    (($broadcast & (255 << 24)) >> 24) . '.' .
-	    (($broadcast & (255 << 16)) >> 16) . '.' .
-	    (($broadcast & (255 << 8)) >> 8) . '.' .
-	    ($broadcast & 255);
-    } elsif ($address =~
-	     m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)\.(\d+)\.(\d+)\.(\d+)$!) {
-	my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4;
-	my $mask = ($5 << 24) + ($6 << 16) + ($7 << 8) + $8;
-	my $broadcast = $numadr | (~$mask);
-	$address =
-	    (($broadcast & (255 << 24)) >> 24) . '.' .
-	    (($broadcast & (255 << 16)) >> 16) . '.' .
-	    (($broadcast & (255 << 8)) >> 8) . '.' .
-	    ($broadcast & 255);
-    }
-    
-    return $address;
-}
-
-sub networkaddress {
-    
-    # Guesses a network address for a given broadcast address
-    
-    my ($address) = @_;
-
-    if ($address =~ /\.255$/) {
-	while ($address =~ s/\.255$//) {};
-	$address .= ".*";
-    }
- 
-    return $address;
-}
-
-sub localprintersshared {
-
-    # Do we broadcast our local printers
-
-    my ($printer) = @_;
-
-    return ($printer->{cupsconfig}{keys}{Browsing} !~ /off/i &&
-	    $printer->{cupsconfig}{keys}{BrowseInterval} != 0 &&
-	    $#{$printer->{cupsconfig}{keys}{BrowseAddress}} >= 0);
-}
-
-sub remotebroadcastsaccepted {
-    
-    # Do we accept broadcasts from remote CUPS servers?
-
-    my ($printer) = @_;
-
-    # Is browsing not turned on at all?
-    if ($printer->{cupsconfig}{keys}{Browsing} =~ /off/i) {
-	return 0;
-    }
-
-    # No "BrowseDeny" lines at all
-    if ($#{$printer->{cupsconfig}{keys}{BrowseDeny}} < 0) {
-	return 1;
-    }
-
-    my $havedenyall = 
-	join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
-	 /All/im;
-    my $havedenylocal = 
-	join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
-	 /\@LOCAL/im;
-    my $orderallowdeny =
-	$printer->{cupsconfig}{keys}{BrowseOrder} =~
-	 /allow\s*,\s*deny/i;
-    my $haveallowremote = 0;
-    foreach my $allowline (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) {
-	next if 
-	    $allowline =~ /^\s*(localhost|0*127\.0+\.0+\.0*1|none)\s*$/i;
-	$haveallowremote = 1;
-    }
-
-    # A line denying all (or at least the all LANs) together with the order
-    # "allow,deny" or without "BrowseAllow" lines (which allow the
-    # broadcasts of at least one remote resource).
-    if (($havedenyall || $havedenylocal) &&
-	($orderallowdeny || !$haveallowremote)) {
-	return 0;
-    }
-
-    return 1;
-}
-
-sub clientnetworks {
-
-    # Determine the client networks to which the printers will be
-    # shared If the configuration is supported by our simplified
-    # interface ("Deny From All", "Order Deny,Allow", "Allow From ..."
-    # lines in "<location /> ... </location>", a "BrowseAddress ..."
-    # line for each "Allow From ..." line), return the list of allowed
-    # client networks ("Allow"/"BrowseAddress" lines), if not, return
-    # the list of all items which are at least one of the
-    # "BrowseAddresse"s or one of the "Allow From" addresses together
-    # with a flag that the setup is not supported.
-
-    my ($printer) = @_;
-
-    # Check for a "Deny From All" line
-    my $havedenyfromall =
-	(join('', @{$printer->{cupsconfig}{root}{DenyFrom}}) =~
-	 /All/im ? 1 : 0);
-
-    # Check for "Deny From XXX" with XXX != All
-    my $havedenyfromnotall =
-	($#{$printer->{cupsconfig}{root}{DenyFrom}} - $havedenyfromall < 0 ?
-	 0 : 1);
-    
-    # Check for a "BrowseDeny All" line
-    my $havebrowsedenyall =
-	(join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~
-	 /All/im ? 1 : 0);
-
-    # Check for "BrowseDeny XXX" with XXX != All
-    my $havebrowsedenynotall =
-	($#{$printer->{cupsconfig}{keys}{BrowseDeny}} - 
-	 $havebrowsedenyall < 0 ? 0 : 1);
-    
-    my @sharehosts;
-    my $haveallowfromlocalhost = 0;
-    my $haveallowedhostwithoutbrowseaddress = 0;
-    my $haveallowedhostwithoutbrowseallow = 0;
-    # Go through all "Allow From" lines
-    foreach my $line (@{$printer->{cupsconfig}{root}{AllowFrom}}) {
-	if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
-	    # Line pointing to localhost
-	    $haveallowfromlocalhost = 1;
-	} elsif ($line =~ /^\s*(none)\s*$/i) {
-	    # Skip "Allow From None" lines
-	} elsif (!member($line, @sharehosts)) {
-	    # Line pointing to remote server
-	    push(@sharehosts, $line);
-	    if (!member(broadcastaddress($line),
-			@{$printer->{cupsconfig}{keys}{BrowseAddress}})) {
-		$haveallowedhostwithoutbrowseaddress = 1;
-	    }
-	    if (!member($line,
-			@{$printer->{cupsconfig}{keys}{BrowseAllow}})) {
-		$haveallowedhostwithoutbrowseallow = 1;
-	    }
-	}
-    }
-    my $havebrowseaddresswithoutallowedhost = 0;
-    # Go through all "BrowseAdress" lines
-    foreach my $line (@{$printer->{cupsconfig}{keys}{BrowseAddress}}) {
-	if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
-	    # Skip lines pointing to localhost
-	} elsif ($line =~ /^\s*(none)\s*$/i) {
-	    # Skip "Allow From None" lines
-	} elsif (!member($line, map { broadcastaddress($_) } @sharehosts)) {
-	    # Line pointing to remote server
-	    push(@sharehosts, networkaddress($line));
-	    if ($printer->{cupsconfig}{localprintersshared}) {
-		$havebrowseaddresswithoutallowedhost = 1;
-	    }
-	}
-    }
-    my $havebrowseallowwithoutallowedhost = 0;
-    # Go through all "BrowseAllow" lines
-    foreach my $line (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) {
-	if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) {
-	    # Skip lines pointing to localhost
-	} elsif ($line =~ /^\s*(none)\s*$/i) {
-	    # Skip "BrowseAllow None" lines
-	} elsif (!member($line, @sharehosts)) {
-	    # Line pointing to remote server
-	    push(@sharehosts, $line);
-	    #$havebrowseallowwithoutallowedhost = 1;
-	}
-    }
-
-    my $configunsupported = (!$havedenyfromall || $havedenyfromnotall ||
-			     !$havebrowsedenyall || $havebrowsedenynotall ||
-			     !$haveallowfromlocalhost ||
-			     $haveallowedhostwithoutbrowseaddress ||
-			     $havebrowseaddresswithoutallowedhost ||
-			     $haveallowedhostwithoutbrowseallow ||
-			     $havebrowseallowwithoutallowedhost);
-
-    return $configunsupported, @sharehosts;
-}
-
-sub makesharehostlist {
-
-    # Human-readable strings for hosts onto which the local printers
-    # are shared
-
-    my ($printer) = @_;
-
-    my @sharehostlist; 
-    my %sharehosthash;
-    foreach my $host (@{$printer->{cupsconfig}{clientnetworks}}) {
-	if ($host =~ /\@LOCAL/i) {
-	    $sharehosthash{$host} = N("Local network(s)");
-	} elsif ($host =~ /\@IF\((.*)\)/i) {
-	    $sharehosthash{$host} = N("Interface \"%s\"", $1);
-	} elsif ($host =~ m!(/|^\*|\*$|^\.)!) {
-	    $sharehosthash{$host} = N("Network %s", $host);
-	} else {
-	    $sharehosthash{$host} = N("Host %s", $host);
-	}
-	push(@sharehostlist, $sharehosthash{$host});
-    }
-    my %sharehosthash_inv = reverse %sharehosthash;
-
-    return { list => \@sharehostlist, 
-	     hash => \%sharehosthash, 
-	     invhash => \%sharehosthash_inv };
-}
-
-sub makebrowsepolllist {
-
-    # Human-readable strings for hosts from which the print queues are
-    # polled
-
-    my ($printer) = @_;
-
-    my @browsepolllist; 
-    my %browsepollhash;
-    foreach my $host (@{$printer->{cupsconfig}{BrowsePoll}}) {
-	my ($ip, $port);
-	if ($host =~ /^([^:]+):([^:]+)$/) {
-	    $ip = $1;
-	    $port = $2;
-	} else {
-	    $ip = $host;
-	    $port = '631';
-	}
-	$browsepollhash{$host} = N("%s (Port %s)", $ip, $port);
-	push(@browsepolllist, $browsepollhash{$host});
-    }
-    my %browsepollhash_inv = reverse %browsepollhash;
-
-    return { list => \@browsepolllist, 
-	     hash => \%browsepollhash, 
-	     invhash => \%browsepollhash_inv };
-}
-
-sub is_network_ip {
-
-    # Determine whwther the given string is a valid network IP
-
-    my ($address) = @_;
-
-    $address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/ ||
-	$address =~ /^(\d+\.){1,3}\*$/ ||
-	$address =~ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)$! ||
-	$address =~
-	 m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)\.(\d+)\.(\d+)\.(\d+)$!;
-
-}
-
-sub read_cups_config {
-    
-    # Read the information relevant to the printer sharing dialog from
-    # the CUPS configuration
-
-    my ($printer) = @_;
-
-    # From /etc/cups/cupsd.conf
-
-    # Keyword "Browsing" 
-    $printer->{cupsconfig}{keys}{Browsing} =
-	handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf},
-					      'Browsing', 'On');
-
-    # Keyword "BrowseInterval"
-    $printer->{cupsconfig}{keys}{BrowseInterval} =
-	handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf},
-					      'BrowseInterval', '30');
-
-    # Keyword "BrowseAddress" 
-    @{$printer->{cupsconfig}{keys}{BrowseAddress}} =
-	handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf},
-					'BrowseAddress');
-
-    # Keyword "BrowseAllow" 
-    @{$printer->{cupsconfig}{keys}{BrowseAllow}} =
-	handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf},
-					'BrowseAllow');
-
-    # Keyword "BrowseDeny" 
-    @{$printer->{cupsconfig}{keys}{BrowseDeny}} =
-	handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf},
-					'BrowseDeny');
-
-    # Keyword "BrowseOrder" 
-    $printer->{cupsconfig}{keys}{BrowseOrder} =
-	handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf},
-					      'BrowseOrder', 'deny,allow');
-
-    # Keyword "BrowsePoll" (needs "Browsing On")
-    if ($printer->{cupsconfig}{keys}{Browsing} !~ /off/i) {
-	@{$printer->{cupsconfig}{BrowsePoll}} =
-	    handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf},
-					    'BrowsePoll');
-    }
-
-    # Root location
-    @{$printer->{cupsconfig}{rootlocation}} =
-	read_location($printer->{cupsconfig}{cupsd_conf}, '/');
-
-    # Keyword "Allow from" 
-    @{$printer->{cupsconfig}{root}{AllowFrom}} =
-	handle_configs::read_directives($printer->{cupsconfig}{rootlocation},
-					'Allow From');
-    # Remove the IPs pointing to the local machine
-    my @localips = printer::detect::getIPsOfLocalMachine();
-    @{$printer->{cupsconfig}{root}{AllowFrom}} =
-	grep {
-	    !member($_, @localips)
-	} @{$printer->{cupsconfig}{root}{AllowFrom}};
-
-    # Keyword "Deny from" 
-    @{$printer->{cupsconfig}{root}{DenyFrom}} =
-	handle_configs::read_directives($printer->{cupsconfig}{rootlocation},
-					'Deny From');
-
-    # Keyword "Order" 
-    $printer->{cupsconfig}{root}{Order} =
-	handle_configs::read_unique_directive($printer->{cupsconfig}{rootlocation},
-					      'Order', 'Deny,Allow');
-
-    # Widget settings
-
-    # Local printers available to other machines?
-    $printer->{cupsconfig}{localprintersshared} = 
-	localprintersshared($printer);
-
-    # This machine is accepting printers shared by remote machines?
-    $printer->{cupsconfig}{remotebroadcastsaccepted} =
-	remotebroadcastsaccepted($printer);
-
-    # To which machines are the local printers available?
-    ($printer->{cupsconfig}{customsharingsetup},
-     @{$printer->{cupsconfig}{clientnetworks}}) =
-	 clientnetworks($printer);
-
-}
-
-sub write_cups_config {
-    
-    # Write the information edited via the printer sharing dialog into
-    # the CUPS configuration
-
-    my ($printer) = @_;
-
-    # Local printers available to other machines?
-    if ($printer->{cupsconfig}{localprintersshared}) {
-	handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-				      'Browsing On');
-	if ($printer->{cupsconfig}{keys}{BrowseInterval} == 0) {
-	    handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-					  'BrowseInterval 30');
-	}  
-    } else {
-	handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-				      'BrowseInterval 0');
-    }
-
-    # This machine is accepting printers shared by remote machines?
-    if ($printer->{cupsconfig}{remotebroadcastsaccepted}) {
-	handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-				      'Browsing On');
-	if (!$printer->{cupsconfig}{customsharingsetup}) {
-	    # If we broadcast our printers, let's accept the broadcasts
-	    # from the machines to which we broadcast
-	    handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-					  'BrowseDeny All');
-	    handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-					  'BrowseOrder Deny,Allow');
-	}
-    } else {
-	if ($printer->{cupsconfig}{localprintersshared} ||
-	    $#{$printer->{cupsconfig}{BrowsePoll}} >= 0) {
-	    # Deny all broadcasts, but leave all "BrowseAllow" lines
-	    # untouched
-	    handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-					  'BrowseDeny All');
-	      handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-					    'BrowseOrder Allow,Deny');
-	} else {
-	    # We also do not share printers, if we also do not
-	    # "BrowsePoll", we turn browsing off to do not need to deal 
-	    # with any addresses
-	    handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-					  'Browsing Off');
-	}
-    }
-
-    # To which machines are the local printers available?
-    if (!$printer->{cupsconfig}{customsharingsetup}) {
-	my @localips = printer::detect::getIPsOfLocalMachine();
-	# root location block
-	@{$printer->{cupsconfig}{rootlocation}} =
-	    "<Location />\n" .
-	    "Order Deny,Allow\n" .
-	    "Deny From All\n" .
-	    "Allow From 127.0.0.1\n" .
-	    (@localips ?
-	     "Allow From " .
-	     join("\nAllow From ", @localips) .
-	     "\n" : "") .
-	    ($printer->{cupsconfig}{localprintersshared} &&
-	     $#{$printer->{cupsconfig}{clientnetworks}} >= 0 ?
-	     "Allow From " .
-	     join("\nAllow From ", 
-		  grep {
-		      !member($_, @localips)
-		  } @{$printer->{cupsconfig}{clientnetworks}}) .
-	     "\n" : "") .
-	    "</Location>\n";
-	my ($location_start, @_location) = 
-	    rip_location($printer->{cupsconfig}{cupsd_conf}, "/");
-	insert_location($printer->{cupsconfig}{cupsd_conf}, $location_start,
-			@{$printer->{cupsconfig}{rootlocation}});
-	# "BrowseAddress" lines
-	if ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) {
-	    handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-					  'BrowseAddress ' .
-					  join("\nBrowseAddress ",
-						map { broadcastaddress($_) }
-						@{$printer->{cupsconfig}{clientnetworks}}));
-	} else {
-	    handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf},
-					      'BrowseAddress')
-	}
-	# Set "BrowseAllow" lines
-	if ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) {
-	    handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-					  'BrowseAllow ' .
-					  join("\nBrowseAllow ", 
-						@{$printer->{cupsconfig}{clientnetworks}}));
-	} else {
-	    handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf},
-					      'BrowseAllow');
-	}
-    }
-
-    # Set "BrowsePoll" lines
-    if ($#{$printer->{cupsconfig}{BrowsePoll}} >= 0) {
-	handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-				      'BrowsePoll ' .
-				      join("\nBrowsePoll ", 
-					    @{$printer->{cupsconfig}{BrowsePoll}}));
-	# "Browsing" must be on for "BrowsePoll" to work
-	handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf},
-				      'Browsing On');
-    } else {
-	handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf},
-					  'BrowsePoll');
-    }
-
-}
-
-sub clean_cups_config {
-    
-    # Clean $printer data structure from all settings not related to
-    # the CUPS printer sharing dialog
-
-    my ($printer) = @_;
-
-    delete $printer->{cupsconfig}{keys};
-    delete $printer->{cupsconfig}{root};
-    delete $printer->{cupsconfig}{cupsd_conf};
-    delete $printer->{cupsconfig}{rootlocation};
-}
-
-#----------------------------------------------------------------------
-# Handling of /etc/cups/client.conf
-
-sub read_client_conf() {
-    return (0, undef) if (! -r "$::prefix/etc/cups/client.conf");
-    my @client_conf = cat_("$::prefix/etc/cups/client.conf");
-    my @servers = handle_configs::read_directives(\@client_conf, 
-						  "ServerName");
-    return (@servers > 0, 
-	    $servers[0]); # If there is more than one entry in client.conf,
-                          # the first one counts.
-}
-
-sub write_client_conf {
-    my ($daemonless_cups, $remote_cups_server) = @_;
-    # Create the directory for client.conf if needed
-    (-d "$::prefix/etc/cups/" ) || mkdir("$::prefix/etc/cups/") || return 1;
-    my (@client_conf) = cat_("$::prefix/etc/cups/client.conf");
-    if ($daemonless_cups) {
-	handle_configs::set_directive(\@client_conf, 
-				      "ServerName $remote_cups_server");
-    } else {
-	handle_configs::comment_directive(\@client_conf, "ServerName");
-    }
-    output("$::prefix/etc/cups/client.conf", @client_conf);
-}
-
-
-
-#----------------------------------------------------------------------
-sub read_printers_conf {
-    my ($printer) = @_;
-    my $current;
-
-    #- read /etc/cups/printers.conf file.
-    #- according to this code, we are now using the following keys for each queues.
-    #-    DeviceURI > lpd://printer6/lp
-    #-    Info      > Info Text
-    #-    Location  > Location Text
-    #-    State     > Idle|Stopped
-    #-    Accepting > Yes|No
-    open(my $PRINTERS, "$::prefix/etc/cups/printers.conf") or return;
-    local $_;
-    while (<$PRINTERS>) {
-	chomp;
-	/^\s*#/ and next;
-	if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } }
-	elsif (m!\s*</Printer>!) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax.
-				   add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef }
-	elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 }
-    }
-    close $PRINTERS;
-
-    #- assume this printing system.
-    $printer->{SPOOLER} ||= 'cups';
-}
-
-sub get_direct_uri() {
-    #- get the local printer to access via a Device URI.
-    my @direct_uri;
-    open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/sbin/lpinfo -v |");
-    local $_;
-    while (<$F>) {
-	/^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2;
-    }
-    close $F;
-    @direct_uri;
-}
-
-sub checkppd {
-    # Check whether the PPD file is valid
-    my ($printer, $ppdfile) = @_;
-    return 1 if $printer->{SPOOLER} ne "cups";
-    return run_program::rooted($::prefix, "cupstestppd", "-q",
-			       $ppdfile);
-}
-
-sub installppd {
-    # Install the PPD file in /usr/share/cups/model/printerdrake/
-    my ($printer, $ppdfile) = @_;
-    return "" if !$ppdfile;
-    # Install PPD file
-    mkdir_p("$::prefix/usr/share/cups/model/printerdrake");
-    # "cp_f()" is broken, it hangs infinitely
-    # cp_f($ppdfile, "$::prefix/usr/share/cups/model/printerdrake");
-    run_program::rooted($::prefix, "cp", "-f", $ppdfile,
-			"$::prefix/usr/share/cups/model/printerdrake");
-    $ppdfile =~ s!^(.*)(/[^/]+)$!/usr/share/cups/model/printerdrake$2!;
-    chmod 0644, "$::prefix$ppdfile";
-    # Restart CUPS to register new PPD file
-    printer::services::restart("cups") if $printer->{SPOOLER} eq "cups";
-    # Re-read printer database
-    %thedb = ();
-    read_printer_db($printer, $printer->{SPOOLER});
-    # Return description string of the PPD file
-    my $ppdentry = get_descr_from_ppdfile($printer, $ppdfile);
-    return $ppdentry;
-}
-
-sub clean_manufacturer_name {
-    my ($make) = @_;
-    # Clean some manufacturer's names so that every manufacturer has only
-    # one entry in the tree list
-    $make =~ s/^CANON\W.*$/CANON/i;
-    $make =~ s/^LEXMARK.*$/LEXMARK/i;
-    $make =~ s/^HEWLETT?[\s\-]*PACKARD/HP/i;
-    $make =~ s/^SEIKO[\s\-]*EPSON/EPSON/i;
-    $make =~ s/^KYOCERA[\s\-]*MITA/KYOCERA/i;
-    $make =~ s/^CITOH/C.ITOH/i;
-    $make =~ s/^OKI(|[\s\-]*DATA)\s*$/OKIDATA/i;
-    $make =~ s/^(SILENTWRITER2?|COLORMATE)/NEC/i;
-    $make =~ s/^(XPRINT|MAJESTIX)/XEROX/i;
-    $make =~ s/^QMS-PS/QMS/i;
-    $make =~ s/^(PERSONAL|LASERWRITER)/APPLE/i;
-    $make =~ s/^DIGITAL/DEC/i;
-    $make =~ s/\s+Inc\.//i;
-    $make =~ s/\s+Corp\.//i;
-    $make =~ s/\s+SA\.//i;
-    $make =~ s/\s+S\.\s*A\.//i;
-    $make =~ s/\s+Ltd\.//i;
-    $make =~ s/\s+International//i;
-    $make =~ s/\s+Int\.//i;
-    return uc($make);
-}    
-
-sub ppd_entry_str {
-    my ($mf, $descr, $lang) = @_;
-    my ($model, $driver);
-    if ($descr) {
-	# Apply the beautifying rules of poll_ppd_base
-	if ($descr =~ /Foomatic \+ Postscript/) {
-	    $descr =~ s/Foomatic \+ Postscript/PostScript/;
-	} elsif ($descr =~ /Foomatic/i) {
-	    $descr =~ s/Foomatic/GhostScript/i;
-	} elsif ($descr =~ /CUPS\+Gimp-Print/i) {
-	    $descr =~ s/CUPS\+Gimp-Print/CUPS + Gimp-Print/i;
-	} elsif ($descr =~ /Series CUPS/i) {
-	    $descr =~ s/Series CUPS/Series, CUPS/i;
-	} elsif ($descr !~ /(PostScript|GhostScript|CUPS|Foomatic)/i) {
-	    $descr .= ", PostScript";
-	}
-	# Split model and driver
-	$descr =~ s/\s*Series//i;
-	$descr =~ s/\((.*?(PostScript|PS.*).*?)\)/$1/i;
-	if ($descr =~
-	     /^\s*(Generic\s*PostScript\s*Printer)\s*,?\s*(.*)$/i ||
-	    $descr =~
-	     /^\s*(PostScript\s*Printer)\s*,?\s*(.*)$/i ||
-	    $descr =~ /^([^,]+[^,\s])\s*,?\s*(Foomatic.*)$/i ||
-	    $descr =~ /^([^,]+[^,\s])\s*,?\s*(GhostScript.*)$/i ||
-	    $descr =~ /^([^,]+[^,\s])\s*,?\s*(CUPS.*)$/i ||
-	    $descr =~ /^([^,]+[^,\s])\s*,?\s+(PS.*)$/i ||
-	    $descr =~
-	     /^([^,]+[^,\s])\s*,?\s*(\(v?\.?\s*\d\d\d\d\.\d\d\d\).*)$/i ||
-	    $descr =~ /^([^,]+[^,\s])\s*,?\s*(v\d+\.\d+.*)$/i ||
-	    $descr =~ /^([^,]+[^,\s])\s*,?\s*(PostScript.*)$/i ||
-	    $descr =~ /^([^,]+)\s*,?\s*(.+)$/) {
-	    $model = $1;
-	    $driver = $2;
-	    $model =~ s/[\-\s,]+$//;
-	    $driver =~ s/\b(PS|PostScript\b)/PostScript/gi;
-	    $driver =~ s/(PostScript)(.*)(PostScript)/$1$2/i;
-	    $driver =~ 
-	      s/^\s*(\(?v?\.?\s*\d\d\d\d\.\d\d\d\)?|v\d+\.\d+)([,\s]*)(.*?)\s*$/$3$2$1/i;
-	    $driver =~ s/,\s*\(/ (/g;
-	    $driver =~ s/[\-\s,]+$//;
-	    $driver =~ s/^[\-\s,]+//;
-	    $driver =~ s/\s+/ /g;
-	    if ($driver !~ /[a-z]/i) {
-		$driver = "PostScript " . $driver;
-		$driver =~ s/ $//;
-	    }
-	} else {
-	    # Some PPDs do not have the ", <driver>" part.
-	    $model = $descr;
-	    $driver = "PostScript";
-	}
-    }
-    # Remove manufacturer's name from the beginning of the model
-    # name (do not do this with manufacturer names which contain
-    # odd characters)
-    $model =~ s/^$mf[\s\-]+//i 
-	if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
-    # Clean some manufacturer's names
-    $mf = clean_manufacturer_name($mf);
-    # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the 
-    # models do not appear twice
-    if ($mf eq "CANON") {
-	$model =~ s/BJC\s+/BJC-/;
-    }
-    # New MF devices from Epson have mis-spelled name in PPD files for
-    # native CUPS drivers of Gimp-Print
-    if ($mf eq "EPSON") {
-	$model =~ s/Stylus CX\-/Stylus CX/;
-    }
-    # Remove the "Oki" from the beginning of the model names of Okidata
-    # printers
-    if ($mf eq "OKIDATA") {
-	$model =~ s/Oki\s+//i;
-    }
-    # Try again to remove manufacturer's name from the beginning of the 
-    # model name, this with the cleaned manufacturer name
-    $model =~ s/^$mf[\s\-]+//i 
-	if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
-    # Translate "(recommended)" in the driver string
-    $driver =~ s/\(recommended\)/$precstr/gi;
-    # Put out the resulting description string
-    uc($mf) . '|' . $model . '|' . $driver .
-      ($lang && " (" . lang::locale_to_main_locale($lang) . ")");
-}
-
-sub get_descr_from_ppd {
-    my ($printer) = @_;
-    #- if there is no ppd, this means this is a raw queue.
-    if (! -r "$::prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd") {
-	return "|" . N("Unknown model");
-    }
-    return get_descr_from_ppdfile($printer, "/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd");
-}
-
-sub get_descr_from_ppdfile {
-    my ($printer, $ppdfile) = @_;
-    my %ppd;
-
-    # Remove ".gz" from end of file name, so that "catMaybeCompressed" works
-    $ppdfile =~ s/\.gz$//;
-
-    eval {
-	local $_;
-	foreach (catMaybeCompressed("$::prefix$ppdfile")) {
-	    # "OTHERS|Generic PostScript printer|PostScript (en)";
-	    /^\*([^\s:]*)\s*:\s*"([^"]*)"/ and
-		do { $ppd{$1} = $2; next };
-	    /^\*([^\s:]*)\s*:\s*([^\s"]*)/   and
-		do { $ppd{$1} = $2; next };
-	}
-    };
-    my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName});
-    my $make = $ppd{Manufacturer};
-    my $lang = $ppd{LanguageVersion};
-    my $entry = ppd_entry_str($make, $descr, $lang);
-    if (!$printer->{expert}) {
-	# Remove driver from printer list entry when in recommended mode
-	$entry =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/;
-    }
-    return $entry;
-}
-
-sub ppd_devid_data {
-    my ($ppd) = @_;
-    $ppd = "$::prefix/usr/share/cups/model/$ppd";
-    my @content;
-    if ($ppd =~ /\.gz$/i) {
-	@content = cat_("$::prefix/bin/zcat $ppd |") or return "", "";
-    } else {
-	@content = cat_($ppd) or return "", "";
-    }
-    my ($devidmake, $devidmodel);
-    /^\*Manufacturer:\s*"(.*)"\s*$/ and $devidmake = $1
-	foreach @content;
-    /^\*Product:\s*"\(?(.*?)\)?"\s*$/ and $devidmodel = $1 
-	foreach @content;
-    return $devidmake, $devidmodel;
-}
-
-sub poll_ppd_base {
-    my ($printer) = @_;
-    #- Before trying to poll the ppd database available to cups, we have 
-    #- to make sure the file /etc/cups/ppds.dat is no more modified.
-    #- If cups continue to modify it (because it reads the ppd files 
-    #- available), the poll_ppd_base program simply cores :-)
-    # else cups will not be happy! and ifup lo do not run ?
-    run_program::rooted($::prefix, 'ifconfig', 'lo', '127.0.0.1');
-    printer::services::start_not_running_service("cups");
-    my $driversthere = scalar(keys %thedb);
-    foreach (1..60) {
-	open(my $PPDS, ($::testing ? $::prefix :
-				 "chroot $::prefix/ ") .
-				 "/usr/bin/poll_ppd_base -a |");
-	local $_;
-	while (<$PPDS>) {
-	    chomp;
-	    my ($ppd, $mf, $descr, $lang) = split /\|/;
-	    if ($ppd eq "raw") { next }
-	    $ppd && $mf && $descr and do {
-		my $key = ppd_entry_str($mf, $descr, $lang);
-		my ($model, $driver) = ($1, $2) if $key =~ /^[^\|]+\|([^\|]+)\|(.*)$/;
-		# Clean some manufacturer's names
-		$mf = clean_manufacturer_name($mf);
-		# Remove language tag
-		$driver =~ s/\s*\([a-z]{2}(|_[A-Z]{2})\)\s*$//;
-		# Recommended Foomatic PPD? Extract "(recommended)"
-		my $isrecommended = 
-		    $driver =~ s/\s+$sprecstr\s*$//i;
-		# Remove trailing white space
-		$driver =~ s/\s+$//;
-		# For Foomatic: Driver with "GhostScript + "
-		my $fullfoomaticdriver = $driver;
-		# Foomatic PPD? Extract driver name
-		my $isfoomatic = 
-		    $driver =~ s!^\s*(GhostScript|Foomatic)(\s*\+\s*|/)!!i;
-		# Foomatic PostScript driver?
-		$isfoomatic ||= $descr =~ /Foomatic/i;
-		# Native CUPS?
-		my $isnativecups = $driver =~ /CUPS/i;
-		# Native PostScript
-		my $isnativeps = !$isfoomatic && !$isnativecups;
-		# Key without language tag (key as it was produced for the
-		# entries from the Foomatic XML database)
-		my $keynolang = $key;
-		$keynolang =~ s/\s*\([a-z]{2}(|_[A-Z]{2})\)\s*$//;
-		if (!$isfoomatic) {
-		    # Driver is PPD when the PPD is a non-Foomatic one
-		    $driver = "PPD";
-		} else {
-		    # Remove language tag in menu entry when PPD is from
-		    # Foomatic
-		    $key = $keynolang;
-		}
-	        my ($devidmake, $devidmodel, $deviddesc, $devidcmdset);
-		if (!$printer->{expert}) {
-		    # Remove driver from printer list entry when in
-		    # recommended mode
-		    $key =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/;
-		    # Only replace an existing printer entry if
-		    #  - its driver is not the same as the driver of the
-		    #    new one
-		    # AND if one of the following items is true
-		    #  - The existing entry uses a "Foomatic + Postscript" 
-		    #    driver and the new one is native PostScript
-		    #  - The existing entry is a Foomatic entry and the new 
-		    #    one is "recommended"
-		    #  - The existing entry is a native PostScript entry
-		    #    and the new entry is a "recommended" driver other
-		    #    then "Foomatic + Postscript"
-		    if (defined($thedb{$key})) {
-			next if lc($thedb{$key}{driver}) eq
-				     lc($driver);
-			if ($isnativeps &&
-                            $thedb{$key}{driver} =~ /^PostScript$/i ||
-                            $thedb{$key}{driver} ne "PPD" && $isrecommended ||
-                            $thedb{$key}{driver} eq "PPD" && $isrecommended && $driver ne "PostScript") {
-			    # Save the autodetection data
-			    $devidmake = $thedb{$key}{devidmake};
-			    $devidmodel = $thedb{$key}{devidmodel};
-			    $deviddesc = $thedb{$key}{deviddesc};
-			    $devidcmdset = $thedb{$key}{devidcmdset};
-                            # Remove the old entry
-                            delete $thedb{$key};
-                        } else {
-                            next;
-                        }
-		    }
-		} elsif ((defined 
-			   $thedb{"$mf|$model|$fullfoomaticdriver"} ||
-			  defined 
-			   $thedb{"$mf|$model|$fullfoomaticdriver $precstr"}) && 
-			 $isfoomatic) {
-		    # Expert mode: There is already an entry for the
-		    # same printer/driver combo produced by the
-		    # Foomatic XML database, so do not make a second
-		    # entry
-		    next;
-		} elsif (defined
-			 $thedb{"$mf|$model|PostScript $precstr"} &&
-			 $isnativeps) {
-		    # Expert mode: "Foomatic + Postscript" driver is
-		    # recommended and this is a PostScript PPD? Make
-		    # this PPD the recommended one
-		    foreach (keys 
-		         %{$thedb{"$mf|$model|PostScript $precstr"}}) {
-			$thedb{"$mf|$model|PostScript"}{$_} =
-			  $thedb{"$mf|$model|PostScript $precstr"}{$_};
-		    }
-		    delete
-			$thedb{"$mf|$model|PostScript $precstr"};
-		    if (!$isrecommended) {
-			$key .= " $precstr";
-		    }
-		} elsif ($driver =~ /PostScript/i &&
-			 $isrecommended && $isfoomatic &&
-			 (my @foundkeys = grep {
-			     /^$mf\|$model\|/ && !/CUPS/i &&
-			     $thedb{$_}{driver} eq "PPD" 
-			 } keys %thedb)) {
-		    # Expert mode: "Foomatic + Postscript" driver is
-		    # recommended and there was a PostScript PPD? Make
-		    # the PostScript PPD the recommended one
-		    my $firstfound = $foundkeys[0];
-		    if (!(any { /$sprecstr/ } @foundkeys)) {
-			# Do it only if none of the native PostScript
-			# PPDs for this printer is already "recommended"
-			foreach (keys %{$thedb{$firstfound}}) {
-			    $thedb{"$firstfound $precstr"}{$_} =
-				$thedb{$firstfound}{$_};
-			}
-			delete $thedb{$firstfound};
-		    }
-		    $key =~ s/\s*$sprecstr//;
-		} elsif ($driver !~ /PostScript/i &&
-			 $isrecommended && $isfoomatic &&
-			 (@foundkeys = grep {
-			     /^$mf\|$model\|.*$sprecstr/ && 
-			     !/CUPS/i && $thedb{$_}{driver} eq "PPD" 
-			 } keys %thedb)) {
-		    # Expert mode: Foomatic driver other than "Foomatic +
-		    # Postscript" is recommended and there was a PostScript 
-		    # PPD which was recommended? Make The Foomatic driver
-		    # the recommended one
-		    foreach my $sourcekey (@foundkeys) {
-			# Remove the "recommended" tag
-			my $destkey = $sourcekey;
-			$destkey =~ s/\s+$sprecstr\s*$//i;
-			foreach (keys %{$thedb{$sourcekey}}) {
-			    $thedb{$destkey}{$_} = $thedb{$sourcekey}{$_};
-			}
-			delete $thedb{$sourcekey};
-		    }
-		}
-	        $thedb{$key}{ppd} = $ppd;
-		$thedb{$key}{make} = $mf;
-		$thedb{$key}{model} = $model;
-		$thedb{$key}{driver} = $driver;
-		# Recover saved autodetection data
-		$thedb{$key}{devidmake} = $devidmake if $devidmake;
-		$thedb{$key}{devidmodel} = $devidmodel if $devidmodel;
-		$thedb{$key}{deviddesc} = $deviddesc if $deviddesc;
-		$thedb{$key}{devidcmdset} = $devidcmdset if $devidcmdset;
-		# Get autodetection data
-		#my ($devidmake, $devidmodel) = ppd_devid_data($ppd);
-		#$thedb{$key}{devidmake} = $devidmake;
-		#$thedb{$key}{devidmodel} = $devidmodel;
-	    }
-	}
-	close $PPDS;
-	scalar(keys %thedb) - $driversthere > 5 and last;
-	#- we have to try again running the program, wait here a little 
-	#- before.
-	sleep 1;
-    }
-    #scalar(keys %descr_to_ppd) > 5 or 
-    #  die "unable to connect to cups server";
-
-}
-
-
-
-#-******************************************************************************
-#- write functions
-#-******************************************************************************
-
-sub configure_queue($) {
-    my ($printer) = @_;
-
-    #- Create the queue with "foomatic-configure", in case of queue
-    #- renaming copy the old queue
-    my $quotedconnect = $printer->{currentqueue}{connect};
-    $quotedconnect =~ s/\$/\\\$/g; # Quote '$' in URI
-    run_program::rooted($::prefix, "foomatic-configure", "-q",
-			"-s", $printer->{currentqueue}{spooler},
-			"-n", $printer->{currentqueue}{queue},
-			($printer->{currentqueue}{queue} ne 
-			 $printer->{OLD_QUEUE} &&
-			 $printer->{configured}{$printer->{OLD_QUEUE}} ?
-			 ("-C", $printer->{OLD_QUEUE}) : ()),
-			"-c", $quotedconnect,
-			($printer->{currentqueue}{foomatic} ?
-			 ("-p", $printer->{currentqueue}{printer},
-			  "-d", $printer->{currentqueue}{driver}) :
-			 ($printer->{currentqueue}{ppd} ?
-			  ($printer->{currentqueue}{ppd} ne '1' ?
-			   ("--ppd",
-			    ($printer->{currentqueue}{ppd} !~ m!^/! ?
-			     "/usr/share/cups/model/" : "") .
-			    $printer->{currentqueue}{ppd}) : ()) :
-			  ("-d", "raw"))),
-			"-N", $printer->{currentqueue}{desc},
-			"-L", $printer->{currentqueue}{loc},
-			@{$printer->{currentqueue}{options}}
-			) or return 0;;
-    if ($printer->{currentqueue}{ppd} &&
-	($printer->{currentqueue}{ppd} ne '1')) {
-	# Add a comment line containing the path of the used PPD file to the
-	# end of the PPD file
-	if ($printer->{currentqueue}{ppd} ne '1') {
-	    append_to_file("$::prefix/etc/cups/ppd/$printer->{currentqueue}{queue}.ppd", "*%MDKMODELCHOICE:$printer->{currentqueue}{ppd}\n");
-	}
-    }	  
-
-    # Make sure that queue is active
-    if ($printer->{NEW} && ($printer->{SPOOLER} ne "pdq")) {
-        run_program::rooted($::prefix, "foomatic-printjob",
-			    "-s", $printer->{currentqueue}{spooler},
-			    "-C", "up", $printer->{currentqueue}{queue});
-    }
-
-    # In case of CUPS set some more useful defaults for text and image 
-    # printing
-    if ($printer->{SPOOLER} eq "cups") {
-	set_cups_special_options($printer->{currentqueue}{queue});
-    }
-
-    # Check whether a USB printer is configured and activate USB printing if so
-    my $useUSB = 0;
-    foreach (values %{$printer->{configured}}) {
-	$useUSB ||= $_->{queuedata}{connect} =~ /usb/i || 
-	    $_->{DeviceURI} =~ /usb/i;
-    }
-    $useUSB ||= $printer->{currentqueue}{connect} =~ /usb/i;
-    if ($useUSB) {
-	my $f = "$::prefix/etc/sysconfig/usb";
-	my %usb = getVarsFromSh($f);
-	$usb{PRINTER} = "yes";
-	setVarsInSh($f, \%usb);
-    }
-
-    # Open permissions for device file when PDQ is chosen as spooler
-    # so normal users can print.
-    if ($printer->{SPOOLER} eq 'pdq') {
-	if ($printer->{currentqueue}{connect} =~ 
-	    m!^\s*(file|parallel|usb|serial):(\S*)\s*$!) {
-	    set_permissions($1, "666");
-	}
-    }
-
-    # Make a new printer entry in the $printer structure
-    $printer->{configured}{$printer->{currentqueue}{queue}}{queuedata} =
-        {};
-    copy_printer_params($printer->{currentqueue},
-      $printer->{configured}{$printer->{currentqueue}{queue}}{queuedata});
-    # Construct an entry line for tree view in main window of
-    # printerdrake
-    make_menuentry($printer, $printer->{currentqueue}{queue});
-
-    # Store the default option settings
-    $printer->{configured}{$printer->{currentqueue}{queue}}{args} = {};
-    $printer->{configured}{$printer->{currentqueue}{queue}}{args} =
-	$printer->{ARGS};
-    # Clean up
-    delete($printer->{ARGS});
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{currentqueue} = {};
-
-    return 1;
-}
-
-sub enable_disable_queue {
-    my ($printer, $queue, $state) = @_;
-    
-    if (($printer->{SPOOLER} ne "pdq") &&
-	($printer->{SPOOLER} ne "rcups")) {
-        run_program::rooted($::prefix, "foomatic-printjob",
-			    "-s", $printer->{SPOOLER},
-			    "-C", ($state ? "start" : "stop"), $queue);
-    }
-}
-
-sub remove_queue($$) {
-    my ($printer, $queue) = @_;
-    run_program::rooted($::prefix, "foomatic-configure", "-R", "-q",
-			"-s", $printer->{SPOOLER},
-			"-n", $queue);
-    # Delete old stuff from data structure
-    delete $printer->{configured}{$queue};
-    delete($printer->{currentqueue});
-    delete($printer->{ARGS});
-    $printer->{OLD_CHOICE} = "";
-    $printer->{ARGS} = {};
-    $printer->{DBENTRY} = "";
-    $printer->{currentqueue} = {};
-}
-
-sub restart_queue($) {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-
-    # Restart the daemon(s)
-    for ($printer->{SPOOLER}) {
-	/cups/ and do {
-	    #- restart cups.
-	    printer::services::restart("cups");
-	    last };
-	/lpr|lprng/ and do {
-	    #- restart lpd.
-	    foreach ("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock") {
-		my $pidlpd = (cat_("$::prefix$_"))[0];
-		kill 'TERM', $pidlpd if $pidlpd;
-		unlink "$::prefix$_";
-	    }
-	    printer::services::restart("lpd"); sleep 1;
-	    last };
-    }
-    # Kill the jobs
-    run_program::rooted($::prefix, "foomatic-printjob", "-R",
-			"-s", $printer->{SPOOLER},
-			"-P", $queue, "-");
-
-}
-
-sub print_pages($@) {
-    my ($printer, @pages) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lpr = "/usr/bin/foomatic-printjob";
-    my $lpq = "$lpr -Q";
-    my $spooler = $printer->{SPOOLER};
-    $spooler = "cups" if $spooler eq "rcups";
-
-    # Print the pages
-    foreach (@pages) {
-	my $page = $_;
-	# Only text and PostScript can be printed directly with all
-	# spoolers, images must be treated seperately
-	if ($page =~ /\.jpg$/) {
-	    if ($spooler ne "cups") {
-		# Use "convert" from ImageMagick for non-CUPS spoolers
-		system(($::testing ? $::prefix : "chroot $::prefix/ ") .
-		       "/usr/bin/convert $page -page 427x654+100+65 PS:- | " .
-		       ($::testing ? $::prefix : "chroot $::prefix/ ") .
-		       "$lpr -s $spooler -P $queue");
-	    } else {
-		# Use CUPS's internal image converter with CUPS, tell it
-		# to let the image occupy 90% of the page size (so nothing
-		# gets cut off by unprintable borders)
-		run_program::rooted($::prefix, $lpr, "-s", $spooler,
-				    "-P", $queue, "-o", "scaling=90", $page);
-	    }		
-	} else {
-	    run_program::rooted($::prefix, $lpr, "-s", $spooler,
-				"-P", $queue, $page);
-	}
-    }
-    sleep 5; #- allow lpr to send pages.
-    # Check whether the job is queued
-    open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "$lpq -s $spooler -P $queue |");
-    my @lpq_output =
-	grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } <$F>;
-    close $F;
-    @lpq_output;
-}
-
-sub help_output {
-    my ($printer, $spooler) = @_;
-    my $queue = $printer->{QUEUE};
-
-    open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . sprintf($spoolers{$spooler}{help}, $queue));
-    my $helptext = join("", <$F>);
-    close $F;
-    $helptext ||= "Option list not available!\n";
-    return $helptext;
-}
-
-sub print_optionlist {
-    my ($printer) = @_;
-    my $queue = $printer->{QUEUE};
-    my $lpr = "/usr/bin/foomatic-printjob";
-
-    # Print the option list pages
-    if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
-        run_program::rooted($::prefix, $lpr, "-s", $printer->{SPOOLER},
-			    "-P", $queue, "-o", "docs",
-			    "/etc/bashrc");
-    } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
-	system(($::testing ? $::prefix : "chroot $::prefix/ ") .
-	       "/usr/bin/lphelp $queue | " .
-	       ($::testing ? $::prefix : "chroot $::prefix/ ") .
-	       "$lpr -s $printer->{SPOOLER} -P $queue");
-    }
-}
-
-# ---------------------------------------------------------------
-#
-# Spooler config stuff
-#
-# ---------------------------------------------------------------
-
-sub get_copiable_queues {
-    my ($oldspooler, $newspooler) = @_;
-
-    # No local queues available in daemon-less CUPS mode
-    return () if ($oldspooler eq "rcups") or ($newspooler eq "rcups");
-
-    my @queuelist;      #- here we will list all Foomatic-generated queues
-    # Get queue list with foomatic-configure
-    open(my $QUEUEOUTPUT, ($::testing ? $::prefix : "chroot $::prefix/ ") .
-	    "foomatic-configure -Q -q -s $oldspooler |") or
-		die "Could not run foomatic-configure";
-
-    my $entry = {};
-    my $inentry = 0;
-    local $_;
-    while (<$QUEUEOUTPUT>) {
-	chomp;
-	if ($inentry) {
-	    # We are inside a queue entry
-	    if (m!^\s*</queue>\s*$!) {
-		# entry completed
-		$inentry = 0;
-		if ($entry->{foomatic} && $entry->{spooler} eq $oldspooler) {
-		    # Is the connection type supported by the new
-		    # spooler?
-		    if ($newspooler eq "cups" && $entry->{connect} =~ /^(file|hp|ptal|lpd|socket|smb|ipp):/ ||
-                  $newspooler =~ /^(lpd|lprng)$/ && $entry->{connect} =~ /^(file|ptal|lpd|socket|smb|ncp|postpipe):/ ||
-                  $newspooler eq "pdq" && $entry->{connect} =~ /^(file|ptal|lpd|socket):/) {
-                  push(@queuelist, $entry->{name});
-		    }
-		}
-		$entry = {};
-	    } elsif (m!^\s*<name>(.+)</name>\s*$!) {
-		    # queue name
-		    $entry->{name} = $1;
-	    } elsif (m!^\s*<connect>(.+)</connect>\s*$!) {
-		    # connection type (URI)
-		    $entry->{connect} = $1;
-	    }
-	} else {
-	    if (m!^\s*<queue\s+foomatic\s*=\s*"?(\d+)"?\s*spooler\s*=\s*"?(\w+)"?\s*>\s*$!) {
-		# new entry
-		$inentry = 1;
-		$entry->{foomatic} = $1;
-		$entry->{spooler} = $2;
-	    }
-	}
-    }
-    close $QUEUEOUTPUT;
-
-    return @queuelist;
-}
-
-sub copy_foomatic_queue {
-    my ($printer, $oldqueue, $oldspooler, $newqueue) = @_;
-    run_program::rooted($::prefix, "foomatic-configure", "-q",
-			"-s", $printer->{SPOOLER},
-			"-n", $newqueue,
-			"-C", $oldspooler, $oldqueue);
-    # In case of CUPS set some more useful defaults for text and image printing
-    if ($printer->{SPOOLER} eq "cups") {
-	set_cups_special_options($newqueue);
-    }
-}
-
-# ------------------------------------------------------------------
-#
-# Stuff for non-interactive printer configuration
-#
-# ------------------------------------------------------------------
-
-# Check whether a given URI (for example of an existing queue matches
-# one of the auto-detected printers
-
-sub autodetectionentry_for_uri {
-    my ($uri, @autodetected) = @_;
-
-    if ($uri =~ m!^usb://([^/]+)/([^/\?]+)(|\?serial=(\S+))$!) {
-	# USB device with URI referring to printer model
-	my $make = $1;
-	my $model = $2;
-	my $serial = $4;
-	if ($make && $model) {
-	    $make =~ s/\%20/ /g;
-	    $model =~ s/\%20/ /g;
-	    $serial =~ s/\%20/ /g;
-	    $make =~ s/Hewlett[-\s_]Packard/HP/;
-	    $make =~ s/HEWLETT[-\s_]PACKARD/HP/;
-	    my $smake = handle_configs::searchstr($make);
-	    my $smodel = handle_configs::searchstr($model);
-	    foreach my $p (@autodetected) {
-		next if $p->{port} !~ /usb/i;
-		next if ((!$p->{val}{MANUFACTURER} ||
-                    $p->{val}{MANUFACTURER} ne $make) &&
-                   (!$p->{val}{DESCRIPTION} ||
-                    $p->{val}{DESCRIPTION} !~ /^\s*$smake\s+/));
-		next if ((!$p->{val}{MODEL} ||
-			  $p->{val}{MODEL} ne $model) &&
-			 (!$p->{val}{DESCRIPTION} ||
-			  $p->{val}{DESCRIPTION} !~ /\s+$smodel\s*$/));
-		next if ($serial &&
-			 (!$p->{val}{SERIALNUMBER} ||
-			  $p->{val}{SERIALNUMBER} ne $serial));
-		return $p;
-	    }
-	}
-    } elsif ($uri =~ m!^hp:/(usb|par|net)/!) {
-	# HP printer (controlled by HPLIP)
-	my $hplipdevice = $uri;
-	$hplipdevice =~ m!^hp:/(usb|par|net)/(\S+?)(\?serial=(\S+)|)$!;
-	my $model = $2;
-	my $serial = $4;
-	$model =~ s/_/ /g;
-	foreach my $p (@autodetected) {
-	    next if !$p->{val}{MODEL};
-	    if (uc($p->{val}{MODEL}) ne uc($model)) {
-		my $entry = hplip_device_entry($p->{port}, @autodetected);
-		next if !$entry;
-		my $m = $entry->{model};
-		$m =~ s/_/ /g;
-		next if uc($m) ne uc($model);
-	    }
-	    next if ($serial && !$p->{val}{SERIALNUMBER}) ||
-		(!$serial && $p->{val}{SERIALNUMBER}) ||
-		(uc($serial) ne uc($p->{val}{SERIALNUMBER}));
-	    return $p;
-	}
-    } elsif ($uri =~ m!^ptal://?mlc:!) {
-	# HP multi-function device (controlled by HPOJ)
-	my $ptaldevice = $uri;
-	$ptaldevice =~ s!^ptal://?mlc:!!;
-	if ($ptaldevice =~ /^par:(\d+)$/) {
-	    my $device = "/dev/lp$1";
-	    foreach my $p (@autodetected) {
-		next if !$p->{port} ||
-			 $p->{port} ne $device;
-		return $p;
-	    }
-	} else {
-	    my $model = $2 if $ptaldevice =~ /^(usb|par):(.*)$/;
-	    $model =~ s/_/ /g;
-	    foreach my $p (@autodetected) {
-		next if !$p->{val}{MODEL} ||
-			 $p->{val}{MODEL} ne $model;
-		return $p;
-	    }
-	}
-    } elsif ($uri =~ m!^(socket|smb|file|parallel|usb|serial):/!) {
-	# Local print-only device, Ethernet-(TCP/Socket)-connected printer, 
-	# or printer on Windows server
-	my $device = $uri;
-	$device =~ s/^(file|parallel|usb|serial)://;
-	foreach my $p (@autodetected) {
-	    next if !$p->{port} ||
-		     $p->{port} ne $device;
-	    return $p;
-	}
-    }
-    return undef;
-}
-
-# ------------------------------------------------------------------
-#
-# Configuration of HP multi-function devices
-#
-# ------------------------------------------------------------------
-
-sub read_hplip_db {
-
-    # Read the device database XML file which comes with the HPLIP
-    # package
-    open(my $F, "< $::prefix/usr/share/hplip/data/xml/models.xml") or
-	die "Could not read /usr/share/hplip/data/xml/models.xml\n";
-
-    my $entry = {};
-    my $inentry = 0;
-    my $inrX = 0;
-    my $incomment = 0;
-    my %hplipdevices;
-    local $_;
-    while (<$F>) {
-	chomp;
-	if ($incomment) {
-	    # In a comment block, skip all except the end of the comment
-	    if (m!^(.*?)-->(.*)$!) {
-		# End of comment, keep rest of line
-		$_ = $2;
-		$incomment = 0;
-	    } else {
-		# Skip line
-		$_ = '';
-	    }
-	} else {
-	    while (m/^(.*?)<!--(.*?)-->(.*)$/) {
-		# Remove one-line comments
-		$_ = $1 . $3;
-	    }
-	    if (m/^(.*?)<!--(.*)$/) {
-		# Start of comment, keep the beginning of the line
-		$_ = $1;
-		$incomment = 1;
-	    }
-	}
-	# Is there some non-comment part left in the line
-	if (m!\S!) {
-	    if ($inentry) {
-		# We are inside a device entry
-		if ($inrX) {
-		    # We are in one of the the device's <rX> sections,
-		    # skip the section
-		    if (m!^\s*</r\d+>\s*$!) {
-			# End of <rX> section
-			$inrX = 0;
-		    }
-		} else {
-		    if (m!^\s*<r\d+>\s*$!) {
-			# Start of <rX> section
-			$inrX = 1;
-		    } elsif (m!^\s*</model>\s*$!) {
-			# End of device entry
-			$inentry = 0;
-			my $devidmodel;
-			if ($entry->{$devidmodel}) {
-			    $devidmodel = $entry->{devidmodel};
-			    $devidmodel =~ s/ /_/g;
-			} else {
-			    $devidmodel = $entry->{model};
-			}
-			$hplipdevices{$devidmodel} = $entry;
-			$entry = {};
-		    } elsif (m!^\s*<id>\s*([^<>]+)\s*</id>\s*$!) {
-			# Full ID string
-			my $idstr = $1;
-			$idstr =~ m!(MFG|MANUFACTURER):([^;]+);!i
-			    and $entry->{devidmake} = $2;
-			$idstr =~ m!(MDL|MODEL):([^;]+);!i
-			    and $entry->{devidmodel} = $2;
-			$idstr =~ m!(DES|DESCRIPTION):([^;]+);!i
-			    and $entry->{deviddesc} = $2;
-			$idstr =~ m!(CMD|COMMAND\s*SET):([^;]+);!i
-			    and $entry->{devidcmdset} = $2;
-		    } elsif (m!^\s*<tech type="(\d+)"/>\s*$!) {
-			# Printing technology
-			$entry->{tech} = $1;
-		    } elsif (m!^\s*<align type="(\d+)"/>\s*$!) {
-			# Head alignment type
-			$entry->{align} = $1;
-		    } elsif (m!^\s*<clean type="(\d+)"/>\s*$!) {
-			# Head cleaning type
-			$entry->{clean} = $1;
-		    } elsif (m!^\s*<color-cal type="(\d+)"/>\s*$!) {
-			# Color calibration type
-			$entry->{colorcal} = $1;
-		    } elsif (m!^\s*<status type="(\d+)"/>\s*$!) {
-			# Status request type
-			$entry->{status} = $1;
-		    } elsif (m!^\s*<scan type="(\d+)"/>\s*$!) {
-			# Scanner access type
-			$entry->{scan} = $1;
-		    } elsif (m!^\s*<fax type="(\d+)"/>\s*$!) {
-			# Fax access type
-			$entry->{fax} = $1;
-		    } elsif (m!^\s*<pcard type="(\d+)"/>\s*$!) {
-			# Memory card access type
-			$entry->{card} = $1;
-		    } elsif (m!^\s*<copy type="(\d+)"/>\s*$!) {
-			# Copier access type
-			$entry->{copy} = $1;
-		    }
-		}
-	    } else {
-		# We are not in a printer entry
-		if (m!^\s*<\s*model\s+name=\"(\S+)\"\a*>\s*$!) {
-		    $inentry = 1;
-		    # HPLIP model ID
-		    $entry->{model} = $1;
-		}
-	    }
-	}
-    }
-    close $F;
-    return \%hplipdevices;
-}
-
-sub hplip_simple_model {
-    my ($model) = @_;
-    my $simplemodel = $model;
-    $simplemodel =~ s/[^A-Za-z0-9]//g;
-    $simplemodel =~ s/(DeskJet\d+C?)([a-z]*?)/$1/gi;
-    $simplemodel =~ s/((LaserJet|OfficeJet|PhotoSmart|PSC)\d+)([a-z]*?)/$1/gi;
-    $simplemodel =~ s/DeskJet/DJ/gi;
-    $simplemodel =~ s/PhotoSmartP/PhotoSmart/gi;
-    $simplemodel =~ s/LaserJet/LJ/gi;
-    $simplemodel =~ s/OfficeJet/OJ/gi;
-    $simplemodel =~ s/Series//gi;
-    $simplemodel = uc($simplemodel);
-    return $simplemodel;
-}
-
-sub hplip_device_entry {
-    my ($device, @autodetected) = @_;
-
-    # Currently, only devices on USB work
-    return undef if $device !~ /usb/i;
-
-    if (!$hplipdevicesdb) {
-	# Read the HPLIP device database if not done already
-	$hplipdevicesdb = read_hplip_db();
-    }
-
-    my $entry;
-    foreach my $a (@autodetected) {
-	$device eq $a->{port} or next;
-	# Only HP devices supported
-	return undef if $a->{val}{MANUFACTURER} !~ /^\s*HP\s*$/i;
-	my $modelstr = $a->{val}{MODEL};
-	$modelstr =~ s/ /_/g;
-	if ($entry = $hplipdevicesdb->{$modelstr}) {
-	    # Exact match
-	    return $entry;
-	}
-	# More 'fuzzy' matching
-	my $simplemodel = hplip_simple_model($modelstr);
-	foreach my $key (keys %{$hplipdevicesdb}) {
-	    my $simplekey = hplip_simple_model($key);
-	    return $hplipdevicesdb->{$key} if $simplemodel eq $simplekey;
-	}
-	foreach my $key (keys %{$hplipdevicesdb}) {
-	    my $simplekey = hplip_simple_model($key);
-	    $simplekey =~ s/(\d\d)00(C?)$/$1\\d\\d$2/;
-	    $simplekey =~ s/(\d\d\d)0(C?)$/$1\\d$2/;
-	    $simplekey =~ s/(\d\d)0(\dC?)$/$1\\d$2/;
-	    return $hplipdevicesdb->{$key} if 
-		$simplemodel =~ m/^$simplekey$/;
-	}
-	# Device not supported
-	return undef;
-    }
-    # $device not in @autodetected
-    return undef;
-}
-
-sub hplip_device_entry_from_uri {
-    my ($deviceuri) = @_;
-
-    return undef if $deviceuri !~ m!^hp:/!;
-    
-    if (!$hplipdevicesdb) {
-	# Read the HPLIP device database if not done already
-	$hplipdevicesdb = read_hplip_db();
-    }
-
-    $deviceuri =~ m!^hp:/(usb|par|net)/(\S+?)(\?\S+|)$!;
-    my $model = $2;
-    return undef if !$model;
-
-    my $entry;
-    if ($entry = $hplipdevicesdb->{$model}) {
-	return $entry;
-    }
-    return undef;
-}
-
-sub start_hplip {
-    my ($device, $hplipentry, @autodetected) = @_;
-
-    # Determine connection type
-    my $bus;
-    if ($device =~ /usb/) {
-	$bus = "usb";
-    } elsif ($device =~ /par/ ||
-	     $device =~ m!/dev/lp! ||
-	     $device =~ /printers/) {
-	$bus = "par";
-    } else {
-	return undef;
-    }
-
-    # Start HPLIP daemons
-    printer::services::start_not_running_service("hplip");
-
-    # Determine HPLIP device URI for the CUPS queue
-    foreach my $a (@autodetected) {
-	$device eq $a->{port} or next;
-	open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
-	     '/bin/sh -c "export LC_ALL=C; /usr/lib/cups/backend/hp" |') or
-	     die 'Could not run "/usr/lib/cups/backend/hp"!';
-	while (my $line = <$F>) {
-	    if (($line =~ m!^direct\s+(hp:/$bus/(\S+)\?serial=(\S+))\s+!) ||
-		($line =~ m!^direct\s+(hp:/$bus/(\S+))\s+!)) {
-		my $uri = $1;
-		my $modelstr = $2;
-		my $serial = $3;
-		if ((uc($modelstr) eq uc($hplipentry->{model})) &&
-		    (!$serial ||
-		     (uc($serial) eq uc($a->{val}{SERIALNUMBER})))) {
-		    close $F;
-		    return $uri;
-		}
-	    }
-	}
-	close $F;
-	last;
-    }
-    # HPLIP URI not found
-    return undef;
-}
-
-sub start_hplip_manual {
-
-    # Start HPLIP daemons
-    printer::services::start_not_running_service("hplip");
-
-    # Return all possible device URIs
-    open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
-	 '/bin/sh -c "export LC_ALL=C; /usr/lib/cups/backend/hp" |') or
-	 die 'Could not run "/usr/lib/cups/backend/hp"!';
-    my @uris;
-    while (<$F>) {
-        m!^direct\s+(hp:\S+)\s+!;
-	push(@uris, $1);
-    }
-    return @uris;
-}
-
-sub remove_hpoj_config {
-    my ($device, @autodetected) = @_;
-
-    for my $d (@autodetected) {
-	$device eq $d->{port} or next;
-	my $bus;
-	if ($device =~ /usb/) {
-	    $bus = "usb";
-	} elsif ($device =~ /par/ ||
-		 $device =~ m!/dev/lp! ||
-		 $device =~ /printers/) {
-	    $bus = "par";
-	} elsif ($device =~ /socket/) {
-	    $bus = "hpjd";
-	}
-	my $path = "$::prefix/etc/ptal";
-	opendir PTALDIR, "$path";
-	while (my $file = readdir(PTALDIR)) {
-	    next if $file !~ /^(mlc:|)$bus:/;
-	    $file = "$path/$file";
-	    if ($bus eq "hpjd") {
-		$device =~ m!^socket://(\S+?)(:\d+|)$!;
-		my $host = $1;
-		if ($file =~ /$host/) {
-		    closedir PTALDIR;
-		    unlink ($file) or return $file;
-		    printer::services::restart("hpoj");
-		    return undef;
-		} 
-	    } else {
-		if ((grep { /$d->{val}{MODEL}/ } chomp_(cat_($file))) &&
-		    ((!$d->{val}{SERIALNUMBER}) ||
-		     (grep { /$d->{val}{SERIALNUMBER}/ } 
-		      chomp_(cat_($file))))) {
-		    closedir PTALDIR;
-		    unlink ($file) or return $file;
-		    printer::services::restart("hpoj");
-		    return undef;
-		}
-	    }
-	}
-	last;
-    }
-    closedir PTALDIR;
-    return undef;
-}    
-
-sub configure_hpoj {
-    my ($device, @autodetected) = @_;
-
-    # Make the subroutines of /usr/sbin/ptal-init available
-    # It's only necessary to read it at the first call of this subroutine,
-    # the subroutine definitions stay valid after leaving this subroutine.
-    if (!$ptalinitread) {
-	open(my $PTALINIT, "$::prefix/usr/sbin/ptal-init") or do {
-	    die "unable to open $::prefix/usr/sbin/ptal-init";
-	};
-	my @ptalinitfunctions; # subroutine definitions in /usr/sbin/ptal-init
-	local $_;
-	while (<$PTALINIT>) {
-	    if (m!sub main!) {
-		last;
-	    } elsif (m!^[^#]! && !(m!^\s*exec\b!)) {
-		# Comment lines and the "exec" line (probably obsolete
-		# Red Hat workaround) are skipped.
-
-		# Make the subroutines also working during installation
-		if ($::isInstall) {
-		    s!\$::prefix!\$hpoj_prefix!g;
-		    s!prefix="/usr"!prefix="$::prefix/usr"!g;
-		    s!etcPtal="/etc/ptal"!etcPtal="$::prefix/etc/ptal"!g;
-		    s!varLock="/var/lock"!varLock="$::prefix/var/lock"!g;
-		    s!varRunPrefix="/var/run"!varRunPrefix="$::prefix/var/run"!g;
-		    s!/sbin/lsmod!/usr/bin/lsmod!g;
-		    s!/sbin/modprobe!/usr/bin/modprobe!g;
-		    s!/sbin/rmmod!/usr/bin/rmmod!g;
-		    s!(my\s*\$osPlatform\s*=\s*).*?$!$1"Linux";!g;
-		    s!chomp\s*\$osPlatform\s*;\s*$!!g;
-		    s!(my\s*\$linuxVersion\s*=\s*).*?$!$1"$kernelversion";!g;
-		    s!^\s*\$linuxVersion\s*=~\s*s.*$!!g;
-		    s!chomp\s*\$linuxVersion\s*;\s*$!!g;
-		    s!(my\s*\$usbprintermodule\s*=\s*).*?$!$1"$usbprintermodule";!g;
-		}
-		push @ptalinitfunctions, $_;
-	    }
-	}
-	close $PTALINIT;
-
-	eval "package printer::hpoj;
-        @ptalinitfunctions
-        sub getDevnames {
-	    return (%devnames)
-	}
-        sub getConfigInfo {
-            return (%configInfo)
-        }";
-
-	if ($::isInstall) {
-	    # Needed for photo card reader detection during installation
-	    system("ln -s $::prefix/var/run/ptal-mlcd /var/run/ptal-mlcd");
-	    system("ln -s $::prefix/etc/ptal /etc/ptal");
-	}
-	$ptalinitread = 1;
-    }
-
-    # Read the HPOJ config file and check whether this device is already
-    # configured
-    printer::hpoj::setupVariables();
-    printer::hpoj::readDeviceInfo();
-
-    $device =~ m!^/dev/\S*lp(\d+)$! or
-	$device =~ m!^/dev/printers/(\d+)$! or
-	$device =~ m!^socket://([^:]+)$! or
-	$device =~ m!^socket://([^:]+):(\d+)$!;
-    my $model = $1;
-    my ($model_long, $serialnumber, $serialnumber_long) = ("", "", "");
-    my $cardreader = 0;
-    my $device_ok = 1;
-    my $bus;
-    my $address_arg = "";
-    my $base_address = "";
-    my $hostname = "";
-    my $port = $2;
-    if ($device =~ /usb/) {
-	$bus = "usb";
-    } elsif ($device =~ /par/ ||
-	     $device =~ m!/dev/lp! ||
-	     $device =~ /printers/) {
-	$bus = "par";
-	$address_arg = printer::detect::parport_addr($device);
-	eval "$base_address = $1" if $address_arg =~ /^\s*-base\s+(\S+)/;
-    } elsif ($device =~ /socket/) {
-	$bus = "hpjd";
-	$hostname = $model;
-	return "" if $port && ($port < 9100 || $port > 9103);
-	if ($port && $port != 9100) {
-	    $port -= 9100;
-	    $hostname .= ":$port";
-	}
-    } else {
-	return "";
-    }
-    if ($#autodetected < 0) {
-	# Make a pseudo structure for the auto-detected data if there is
-	# no auto-detected data (for example when configuring manually)
-	$autodetected[0] = {
-	    'port' => $device,
-	    'val' => {
-		'MODEL' => N("Unknown model")
-	    }
-	};
-    }
-    foreach (@autodetected) {
-	$device eq $_->{port} or next;
-	# $model is for the PTAL device name, so make sure that it is unique
-	# so in the case of the model name auto-detection having failed leave
-	# the port number or the host name as model name.
-	my $searchunknown = N("Unknown model");
-	if ($_->{val}{MODEL} &&
-	    $_->{val}{MODEL} !~ /$searchunknown/i &&
-	    $_->{val}{MODEL} !~ /^\s*$/) {
-	    $model = $_->{val}{MODEL};
-	}
-	$serialnumber = $_->{val}{SERIALNUMBER};
-	services::stop("hpoj") if $bus ne "hpjd";
-	# Check if the device is really an HP multi-function device
-	#my $libusb = 0;
-	foreach my $libusb (0, 1) {
-	    # Do access via libusb/user mode only if we have a USB device
-	    next if $libusb && $bus ne "usb";
-	    # Preliminary workaround to make the user-mode USB devices
-	    # (LIDIL devices) installable as verification of the HPOJ
-	    # settings of these devices does not work yet. The workaround
-	    # will probably removed after version 9.2 of this distribution.
-	    # Note: This workaround leaves out the checking for a photo
-	    # memory card reader, but to my knowledge there are no LIDIL
-	    # devices with card reader yet.
-	    if ($libusb) {
-		$device_ok = 1;
-		next;
-	    }
-	    my $printermoduleunloaded = 0;
-	    if ($bus ne "hpjd") {
-		if (!$libusb) {
-		    # Start ptal-mlcd daemon for locally connected devices
-		    # (kernel mode with "printer"/"usblp" module for USB).
-		    run_program::rooted($::prefix, 
-					"ptal-mlcd", "$bus:probe",
-					(($bus ne "par") ||
-					 (!$address_arg) ?
-					 ("-device", $device) : ()), 
-					split(' ',$address_arg));
-		} else {
-		    # Start ptal-mlcd daemon for user-mode USB devices
-		    # (all LIDIL MF devices as HP PSC 1xxx and OfficeJet 
-		    #  4xxx)
-		    my $usbdev = usbdevice($_->{val});
-		    if (defined($usbdev)) {
-			# Unload kernel module "printer"/"usblp"
-			if (modules::any_conf->read->get_probeall("usb-interface")) {
-			    eval(modules::unload($usbprintermodule));
-			    $printermoduleunloaded = 1;
-			}
-			# Start ptal-mlcd
-			run_program::rooted($::prefix, 
-					    "ptal-mlcd", "$bus:probe",
-					    "-device", $usbdev);
-		    } else {
-			# We could not determine the USB device number,
-			# so we cannot check this device in user mode
-			next;
-		    }
-		}
-	    }
-	    $device_ok = 0;
-	    my $ptalprobedevice = $bus eq "hpjd" ? "hpjd:$hostname" : "mlc:$bus:probe";
-	    if (open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice |")) {
-		my $devid = join("", <$F>);
-		close $F;
-		if ($devid) {
-		    $device_ok = 1;
-		    if (open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice -long -mdl 2>/dev/null |")) {
-			$model_long = join("", <$F>);
-			close $F;
-			chomp $model_long;
-			# If SNMP or local port auto-detection failed but 
-			# HPOJ auto-detection succeeded, fill in model name 
-			# here.
-			if (!$_->{val}{MODEL} ||
-			    $_->{val}{MODEL} =~ /$searchunknown/i ||
-			    $_->{val}{MODEL} =~ /^\s*$/) {
-			    if ($model_long =~ /:([^:;]+);/) {
-				$_->{val}{MODEL} = $1;
-				$model = $_->{val}{MODEL};
-				$model =~ s/ /_/g;
-			    }
-			}
-		    }
-		    if (open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice -long -sern 2>/dev/null |")) { #-#
-			$serialnumber_long = join("", <$F>);
-			close $F;
-			chomp $serialnumber_long;
-		    }
-		    $cardreader = 1 if printer::hpoj::cardReaderDetected($ptalprobedevice);
-		}
-	    }
-	    if ($bus ne "hpjd") {
-		# Stop ptal-mlcd daemon for locally connected devices
-		if (open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") . qq(ps auxwww | grep "ptal-mlcd $bus:probe" | grep -v grep | ))) {
-		    my $line = <$F>;
-		    if ($line =~ /^\s*\S+\s+(\d+)\s+/) {
-			my $pid = $1;
-			kill 15, $pid;
-		    }
-		    close $F;
-		}
-		$printermoduleunloaded &&
-		    eval(modules::load($usbprintermodule));
-	    }
-	    last if $device_ok;
-	}
-	printer::services::start("hpoj") if $bus ne "hpjd";
-	last;
-    }
-    # No, it is not an HP multi-function device.
-    return "" if !$device_ok;
-	
-    # If $model_long and $serialnumber_long stay empty, fill them with
-    # $model and $serialnumber
-    $model_long ||= $model;
-    $serialnumber_long ||= $serialnumber;
-
-    # Determine the ptal device name from already existing config files
-    my $ptalprefix =
-	($bus eq "hpjd" ? "hpjd:" : "mlc:$bus:");
-    my $ptaldevice = printer::hpoj::lookupDevname($ptalprefix, $model_long, 
-				    $serialnumber_long, $base_address);
-
-    # It's all done for us, the device is already configured
-    return $ptaldevice if defined($ptaldevice);
-
-    # Determine the ptal name for a new device
-    if ($bus eq "hpjd") {
-	$ptaldevice = "hpjd:$hostname";
-    } else {
-	$ptaldevice = $model;
-	$ptaldevice =~ s![\s/]+!_!g;
-	$ptaldevice = "mlc:$bus:$ptaldevice";
-    }
-
-    # Delete any old/conflicting devices
-    printer::hpoj::deleteDevice($ptaldevice);
-    if ($bus eq "par") {
-	while (1) {
-	    my $oldDevname = printer::hpoj::lookupDevname("mlc:par:",undef,undef,$base_address);
-	    last unless defined($oldDevname);
-	    printer::hpoj::deleteDevice($oldDevname);
-	}
-    }
-
-    # Configure the device
-
-    # Open configuration file
-    open(my $CONFIG, "> $::prefix/etc/ptal/$ptaldevice") or
-	die "Could not open /etc/ptal/$ptaldevice for writing!\n";
-
-    # Write file header.
-    my $date = chomp_(`date`);
-    print $CONFIG
-qq(
-# Added $date by "printerdrake"
-
-# The basic format for this file is "key[+]=value".
-# If you say "+=" instead of "=", then the value is appended to any
-# value already defined for this key, rather than replacing it.
-
-# Comments must start at the beginning of the line.  Otherwise, they may
-# be interpreted as being part of the value.
-
-# If you have multiple devices and want to define options that apply to
-# all of them, then put them in the file /etc/ptal/defaults, which is read
-# in before this file.
-
-# The format version of this file:
-#   ptal-init ignores devices with incorrect/missing versions.
-init.version=2
-);
-
-    # Write model string.
-    if ($model_long !~ /\S/) {
-	print $CONFIG
-	    "\n" .
-	    qq(# "printerdrake" couldn't read the model but added this device anyway:\n) .
-	    "# ";
-    } else {
-	print $CONFIG
-	    "\n" .
-	    "# The device model that was originally detected on this port:\n" .
-	    qq(#   If this ever changes, then you should re-run "printerdrake"\n) .
-	    "#   to delete and re-configure this device.\n";
-	if ($bus eq "par") {
-	    print $CONFIG
-		"#   Comment out if you do not care what model is really connected to this\n" .
-		"#   parallel port.\n";
-	}
-    }
-    print $CONFIG
-	qq(init.mlcd.append+=-devidmatch "$model_long"\n);
-
-    # Write serial-number string.
-    if ($serialnumber_long !~ /\S/) {
-	print $CONFIG
-	    "\n" .
-	    "# The device's serial number is unknown.\n" .
-	    "# ";
-    } else {
-	print $CONFIG
-	    "\n" .
-	    "# The serial number of the device that was originally detected on this port:\n";
-	if ($bus =~ /^[pu]/) {
-	    print $CONFIG
-		"#   Comment out if you want to disable serial-number matching.\n";
-	}
-    }
-    print $CONFIG
-	qq(init.mlcd.append+=-devidmatch "$serialnumber_long"\n);
-
-    if ($bus =~ /^[pu]/) {
-	print $CONFIG
-	    "\n" .
-	    "# Standard options passed to ptal-mlcd:\n" .
-	    "init.mlcd.append+=";
-	if ($bus eq "usb") {
-	    # Important: do not put more quotes around /dev/usb/lp[0-9]*,
-	    # because ptal-mlcd currently does no globbing:
-	    print $CONFIG "-device /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9 /dev/usb/lp10 /dev/usb/lp11 /dev/usb/lp12 /dev/usb/lp13 /dev/usb/lp14 /dev/usb/lp15";
-	} elsif ($bus eq "par") {
-	    print $CONFIG "$address_arg" .
-		(!$address_arg ? " -device $device" : "");
-	}
-	print $CONFIG "\n" .
-	    "\n" .
-	    "# ptal-mlcd's remote console can be useful for debugging, but may be a\n" .
-	    "# security/DoS risk otherwise.  In any case, it's accessible with the\n" .
-	    qq(# command "ptal-connect mlc:<XXX>:<YYY> -service PTAL-MLCD-CONSOLE".\n) .
-	    "# Uncomment the following line if you want to enable this feature for\n" .
-	    "# this device:\n" .
-	    "# init.mlcd.append+=-remconsole\n" .
-	    "\n" .
-	    "# If you need to pass any other command-line options to ptal-mlcd, then\n" .
-	    "# add them to the following line and uncomment the line:\n" .
-	    "# init.mlcd.append+=\n" .
-	    "\n" .
-	    "# By default ptal-printd is started for mlc: devices.  If you use CUPS,\n" .
-	    "# then you may not be able to use ptal-printd, and you can uncomment the\n" .
-	    "# following line to disable ptal-printd for this device:\n" .
-	    "# init.printd.start=0\n";
-    } else {
-	print $CONFIG
-	    "\n" .
-	    "# By default ptal-printd is not started for hpjd: devices.\n" .
-	    "# If for some reason you want to start it for this device, then\n" .
-	    "# uncomment the following line:\n" .
-	    "init.printd.start=1\n";
-    }
-
-    print $CONFIG
-	"\n" .
-	"# If you need to pass any additional command-line options to ptal-printd,\n" .
-	"# then add them to the following line and uncomment the line:\n" .
-	"# init.printd.append+=\n";
-    if ($cardreader) {
-	print $CONFIG
-	    "\n" .
-	    "# Uncomment the following line to enable ptal-photod for this device:\n" .
-	    "init.photod.start=1\n" .
-	    "\n" .
-	    "# If you have more than one photo-card-capable peripheral and you want to\n" .
-	    "# assign particular TCP port numbers and mtools drive letters to each one,\n" .
-	    qq(# then change the line below to use the "-portoffset <n>" option.\n) .
-	    "init.photod.append+=-maxaltports 26\n";
-    }
-    close($CONFIG);
-    printer::hpoj::readOneDevice($ptaldevice);
-
-    # Restart HPOJ
-    printer::services::restart("hpoj");
-
-    # Return HPOJ device name to form the URI
-    return $ptaldevice;
-}
-
-sub devicefound {
-    my ($usbid, $model, $serial) = @_;
-    # Compare the output of "lsusb -vv" with the elements of the device 
-    # ID string
-    if ($serial && $usbid->{SERIALNUMBER} eq $serial) {
-	# Match of serial number has absolute priority
-	return 1;
-    } elsif ($model && $usbid->{MODEL} eq $model) {
-	# Try to match the model name otherwise
-	return 1;
-    }
-    return 0;
-}
-
-sub usbdevice {
-    my ($usbid) = @_;
-    # Run "lsusb -vv" and search the given device to get its USB bus and
-    # device numbers
-    open(my $F, ($::testing ? "" : "chroot $::prefix/ ") .
-	'/bin/sh -c "export LC_ALL=C; lsusb -vv 2> /dev/null" |')
-	or return undef;
-    my ($bus, $device, $model, $serial) = ("", "", "", "");
-    my $found = 0;
-    while (my $line = <$F>) {
-	chomp $line;
-	if ($line =~ m/^\s*Bus\s+(\d+)\s+Device\s+(\d+)\s*:/i) {
-	    # head line of a new device
-	    my ($newbus, $newdevice) = ($1, $2);
-	    last if (($model || $serial) && 
-		     ($found = devicefound($usbid, $model, $serial)));
-	    ($bus, $device) = ($newbus, $newdevice);
-	} elsif ($line =~ m/^\s*iProduct\s+\d+\s+(.+)$/i) {
-	    # model line
-	    next if $device eq "";
-	    $model = $1;
-	} elsif ($line =~ m/^\s*iSerial\s+\d+\s+(.+)$/i) {
-	    # model line
-	    next if $device eq "";
-	    $serial = $1;
-	}
-    }
-    close $F;
-    # Check last entry
-    $found = devicefound($usbid, $model, $serial);
-
-    return 0 if !$found;
-    return sprintf("%%%03d%%%03d", $bus, $device);
-}
-
-sub config_sane {
-    my ($backend) = $_;
-
-    # Add HPOJ/HPLIP backend to /etc/sane.d/dll.conf if needed (no
-    # individual config file /etc/sane.d/hplip.conf or
-    # /etc/sane.d/hpoj.conf necessary, the HPLIP and HPOJ drivers find
-    # the scanner automatically)
-
-    return if (! -f "$::prefix/etc/sane.d/dll.conf");
-    return if member($backend,
-		     chomp_(cat_("$::prefix/etc/sane.d/dll.conf")));
-    eval { append_to_file("$::prefix/etc/sane.d/dll.conf",
-			  "$backend\n") } or
-	   die "can not write SANE config in /etc/sane.d/dll.conf: $!";
-}
-
-sub config_photocard() {
-
-    # Add definitions for the drives p:. q:, r:, and s: to /etc/mtools.conf
-    cat_("$::prefix/etc/mtools.conf") !~ m/^\s*drive\s+p:/m or return;
-
-    append_to_file("$::prefix/etc/mtools.conf", <<'EOF');
-# Drive definitions added for the photo card readers in HP multi-function
-# devices driven by HPOJ
-drive p: file=":0" remote
-drive q: file=":1" remote
-drive r: file=":2" remote
-drive s: file=":3" remote
-# This turns off some file system integrity checks of mtools, it is needed
-# for some photo cards.
-mtools_skip_check=1
-EOF
-
-    # Generate a config file for the graphical mtools frontend MToolsFM or
-    # modify the existing one
-    my $mtoolsfmconf;
-    if (-f "$::prefix/etc/mtoolsfm.conf") {
-	$mtoolsfmconf = cat_("$::prefix/etc/mtoolsfm.conf") or die "can not read MToolsFM config in $::prefix/etc/mtoolsfm.conf: $!";
-	my $alloweddrives = lc($1) if $mtoolsfmconf =~ m/^\s*DRIVES\s*=\s*"([A-Za-z ]*)"/m;
-	foreach my $letter ("p", "q", "r", "s") {
-         $alloweddrives .= $letter if $alloweddrives !~ /$letter/;
-	}
-	$mtoolsfmconf =~ s/^\s*DRIVES\s*=\s*"[A-Za-z ]*"/DRIVES="$alloweddrives"/m;
-	$mtoolsfmconf =~ s/^\s*LEFTDRIVE\s*=\s*"[^"]*"/LEFTDRIVE="p"/m;
-        #"# Fix emacs syntax highlighting
-    } else {
-	$mtoolsfmconf = <<'EOF';
-# MToolsFM config file. comments start with a hash sign.
-#
-# This variable sets the allowed driveletters (all lowercase). Example:
-# DRIVES="ab"
-DRIVES="apqrs"
-#
-# This variable sets the driveletter upon startup in the left window.
-# An empty string or space is for the hardisk. Example:
-# LEFTDRIVE="a"
-LEFTDRIVE="p"
-#
-# This variable sets the driveletter upon startup in the right window.
-# An empty string or space is for the hardisk. Example:
-# RIGHTDRIVE="a"
-RIGHTDRIVE=" "
-EOF
-    }
-    output("$::prefix/etc/mtoolsfm.conf", $mtoolsfmconf);
-}
-
-sub setcupslink {
-    my ($printer) = @_;
-    return 1 if !$::isInstall || $printer->{SPOOLER} ne "cups" || -d "/etc/cups/ppd";
-    system("ln -sf $::prefix/etc/cups /etc/cups");
-    return 1;
-}
-
-
-1;
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
deleted file mode 100644
index 2d3eba81b..000000000
--- a/perl-install/printer/printerdrake.pm
+++ /dev/null
@@ -1,5371 +0,0 @@
-package printer::printerdrake;
-# $Id$
-
-use strict;
-
-use common;
-use modules;
-use network::network;
-use log;
-use interactive;
-use printer::main;
-use printer::services;
-use printer::detect;
-use printer::default;
-use printer::data;
-
-# Overtake translation for "(recommended)" from printer/main.pm
-my $recstr = $printer::main::recstr;
-my $precstr = $printer::main::precstr;
-my $sprecstr = $printer::main::sprecstr;
-
-my $shortdistroname = "Mandriva Linux";
-
-my $hp1000fwtext = N("The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by decompressing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.
-");
-
-1;
-
-sub config_cups {
-    my ($printer, $security, $in, $upNetwork) = @_;
-
-    local $::isWizard = 0;
-    local $::isEmbedded = 0;
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
-
-    #$in->set_help('configureRemoteCUPSServer') if $::isInstall;
-    #- hack to handle cups remote server printing,
-    #- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port
-    # Return value: 0 when nothing was changed ("Apply" never pressed), 1
-    # when "Apply" was at least pressed once.
-    my $retvalue = 0;
-    # Read CUPS config file
-    @{$printer->{cupsconfig}{cupsd_conf}} =
-	printer::main::read_cupsd_conf();
-    printer::main::read_cups_config($printer);
-    # Read client.conf file
-    my ($daemonless_cups, $remote_cups_server) =
-	printer::main::read_client_conf();
-    # Read state of japanese text printing mode
-    my $jap_textmode = printer::main::get_jap_textmode();
-    # Read state for auto-correction of cupsd.conf
-    $printer->{cupsconfig}{autocorrection} =
-	printer::main::get_cups_autoconf();
-    my $oldautocorr = $printer->{cupsconfig}{autocorrection};
-    # Human-readable strings for hosts onto which the local printers
-    # are shared
-    my $maindone;
-    while (!$maindone) {
-	my $sharehosts = printer::main::makesharehostlist($printer);
-	my $browsepoll = printer::main::makebrowsepolllist($printer);
-	my $buttonclicked;
-	#- Show dialog
-	if ($in->ask_from_(
-	     { 
-		 title => N("CUPS printer configuration"),
-		 messages => N("Here you can choose whether the printers connected to this machine should be accessible by remote machines and by which remote machines.") .
-		     N("You can also decide here whether printers on remote machines should be automatically made available on this machine."),
-	     },
-	     [
-	      { text => N("The printers on this machine are available to other computers"), type => 'bool',
-		val => \$printer->{cupsconfig}{localprintersshared},
-		disabled => sub {
-		    $daemonless_cups;
-		} },
-	      { text => N("Automatically find available printers on remote machines"), type => 'bool',
-		val => \$printer->{cupsconfig}{remotebroadcastsaccepted},
-		disabled => sub {
-		    $daemonless_cups;
-		} },
-	      { val => N("Printer sharing on hosts/networks: ") .
-		    ($printer->{cupsconfig}{customsharingsetup} ?
-		     N("Custom configuration") :
-		     ($#{$sharehosts->{list}} >= 0 ?
-		      ($#{$sharehosts->{list}} > 1 ?
-		       join(", ", @{$sharehosts->{list}}[0,1]) . " ..." :
-		       join(", ", @{$sharehosts->{list}})) :
-		      N("No remote machines"))), 
-		type => 'button',
-		clicked_may_quit => sub {
-		    $buttonclicked = "sharehosts";
-		    1;
-		},
-		disabled => sub {
-		    $daemonless_cups ||
-		    (!$printer->{cupsconfig}{localprintersshared} &&
-		     !$printer->{cupsconfig}{remotebroadcastsaccepted});
-		} },
-	      { val => N("Additional CUPS servers: ") .
-		     ($#{$browsepoll->{list}} >= 0 ?
-		      ($#{$browsepoll->{list}} > 1 ?
-		       join(", ", @{$browsepoll->{list}}[0,1]) . " ..." :
-		       join(", ", @{$browsepoll->{list}})) :
-		      N("None")), 
-		type => 'button',
-		help => N("To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."),
-		clicked_may_quit => sub {
-		    $buttonclicked = "browsepoll";
-		    1;
-		},
-		disabled => sub {
-		    $daemonless_cups;
-		} },
-	      { text => N("Japanese text printing mode"),
-		help => N("Turning on this allows to print plain text files in Japanese language. Only use this function if you really want to print text in Japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print Japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine."),
-		type => 'bool',
-		val => \$jap_textmode, 
-		disabled => sub {
-		    $daemonless_cups;
-		} },
-	      if_($printer->{expert},
-		  { text => N("Automatic correction of CUPS configuration"),
-		    type => 'bool',
-		    help => N("When this option is turned on, on every startup of CUPS it is automatically made sure that
-
-- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS
-
-- if /etc/cups/cupsd.conf is missing, it will be created
-
-- when printer information is broadcasted, it does not contain \"localhost\" as the server name.
-
-If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."),
-		    val => \$printer->{cupsconfig}{autocorrection},
-                    disabled => sub {
-			$daemonless_cups;
-		    } }),
-	      { val => N("Remote CUPS server and no local CUPS daemon") .
-		    ": " .
-		    ($daemonless_cups ? 
-		     N("On") . "; " . N("Server") . ": " . 
-		     $remote_cups_server :
-		     N("Off")),
-		help => N("In this mode the local CUPS daemon will be stopped and all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."),
-		type => 'button',
-		clicked_may_quit => sub {
-		    $buttonclicked = "daemonlesscups";
-		    1;
-		} },
-	      ]
-	     )
-	    ) {
-	    if ($buttonclicked eq "sharehosts") {
-		# Show dialog to add hosts to share printers to
-		my $subdone = 0;
-		my $choice;
-		while (!$subdone) {
-		    # Entry should be edited when double-clicked
-		    $buttonclicked = "edit";
-		    $in->ask_from_(
-			 { title => N("Sharing of local printers"),
-			   messages => N("These are the machines and networks on which the locally connected printer(s) should be available:"),
-			   ok => "",
-			   cancel => "",
-		         },
-			 # List the hosts
-			 [ { val => \$choice, format => \&translate,
-			     sort => 0, separator => "####",
-			     tree_expanded => 1,
-			     quit_if_double_click => 1,
-			     allow_empty_list => 1,
-			     list => $sharehosts->{list} },
-			   { val => N("Add host/network"), 
-			     type => 'button',
-			     clicked_may_quit => sub {
-				 $buttonclicked = "add";
-				 1; 
-			     } },
-			   { val => N("Edit selected host/network"), 
-			     type => 'button',
-			     clicked_may_quit => sub {
-				 $buttonclicked = "edit";
-				 1; 
-			     },
-			     disabled => sub {
-				 return $#{$sharehosts->{list}} < 0;
-			     } },
-			   { val => N("Remove selected host/network"), 
-			     type => 'button',
-			     clicked_may_quit => sub {
-				 $buttonclicked = "remove";
-				 1; 
-			     },
-			     disabled => sub {
-				 return $#{$sharehosts->{list}} < 0;
-			     } },
-			   { val => N("Done"), 
-			     type => 'button',
-			     clicked_may_quit => sub {
-				 $buttonclicked = "";
-				 $subdone = 1;
-				 1; 
-			     } },
-			   ]
-			 );
-		    if ($buttonclicked eq "add" ||
-			$buttonclicked eq "edit") {
-			my ($hostchoice, $ip);
-			if ($buttonclicked eq "add") {
-			    # Use first entry as default for a new entry
-			    $hostchoice = N("Local network(s)");
-			} else {
-			    if ($sharehosts->{invhash}{$choice} =~ /^\@/) {
-				# Entry to edit is not an IP address
-				$hostchoice = $choice;
-			    } else {
-				# Entry is an IP address
-				$hostchoice = 
-				    N("IP address of host/network:");
-				$ip = $sharehosts->{invhash}{$choice};
-			    }
-			}
-			my @menu = N("Local network(s)");
-			my @interfaces = 
-			    printer::detect::getNetworkInterfaces();
-		        foreach my $interface (@interfaces) {
-			    push @menu, N("Interface \"%s\"", $interface);
-			}
-			push @menu, N("IP address of host/network:");
-			# Show the dialog
-			my $address;
-			my $oldaddress = 
-			    ($buttonclicked eq "edit" ?
-			     $sharehosts->{invhash}{$choice} : "");
-			if ($in->ask_from_(
-			     { title => N("Sharing of local printers"),
-			       messages => N("Choose the network or host on which the local printers should be made available:"),
-			       callbacks => {
-				   complete => sub {
-				       if ($hostchoice eq 
-					    N("IP address of host/network:") &&
-					   $ip =~ /^\s*$/) {
-					   
-					   $in->ask_warn(N("Error"), N("Host/network IP address missing."));
-					   return 1, 1;
-				       }
-				       if ($hostchoice eq 
-					    N("IP address of host/network:") &&
-					   !printer::main::is_network_ip($ip)) {
-					   
-					   $in->ask_warn(N("Error"), 
-N("The entered host/network IP is not correct.\n") .
-N("Examples for correct IPs:\n") .
-  "192.168.100.194\n" .
-  "10.0.0.*\n" .
-  "10.1.*\n" .
-  "192.168.100.0/24\n" .
-  "192.168.100.0/255.255.255.0\n"
-);
-					   return 1, 1;
-				       }
-				       if ($hostchoice eq $menu[0]) {
-					   $address = '@LOCAL';
-				       } elsif ($hostchoice eq $menu[-1]) {
-					   $address = $ip;
-				       } else {
-					   ($address) =
-					       grep { $hostchoice =~ /$_/ } 
-					       @interfaces;
-					   $address = "\@IF($address)";
-				       }
-				       # Check whether item is duplicate
-				       if ($address ne $oldaddress &&
-					   member($address,
-						  @{$printer->{cupsconfig}{clientnetworks}})) {
-					   $in->ask_warn(N("Error"), 
-							 N("This host/network is already in the list, it cannot be added again.\n"));
-					   if ($hostchoice eq 
-					       N("IP address of host/network:")) {
-					       return 1, 1;
-					   } else {
-					       return 1, 0;
-					   }
-				       }
-				       return 0;
-				   },
-			       },
-			   },
-			     # List the host types
-			     [ { val => \$hostchoice, format => \&translate,
-				 type => 'list',
-				 sort => 0,
-				 list => \@menu },
-			       { val => \$ip, 
-				 disabled => sub {
-				     $hostchoice ne 
-					 N("IP address of host/network:");
-			         } },
-			       ],
-			     )) {
-			    # OK was clicked, insert new item into the list
-			    if ($buttonclicked eq "add") {
-				push(@{$printer->{cupsconfig}{clientnetworks}},
-				     $address);
-			    } else {
-				@{$printer->{cupsconfig}{clientnetworks}} =
-				    map { ($_ eq
-					  $sharehosts->{invhash}{$choice} ?
-					  $address : $_) }
-				        @{$printer->{cupsconfig}{clientnetworks}};
-			    }
-			    # Refresh list of hosts
-			    $sharehosts = 
-			    printer::main::makesharehostlist($printer);
-			    # We have modified the configuration now
-			    $printer->{cupsconfig}{customsharingsetup} = 0;
-			    # Position the list cursor on the new/modified
-			    # item
-			    $choice = $sharehosts->{hash}{$address};
-			}
-		    } elsif ($buttonclicked eq "remove") {
-			@{$printer->{cupsconfig}{clientnetworks}} =
-			    grep { $_ ne $sharehosts->{invhash}{$choice} }
-			    @{$printer->{cupsconfig}{clientnetworks}};
-			# Refresh list of hosts
-			$sharehosts = 
-			    printer::main::makesharehostlist($printer);
-			# We have modified the configuration now
-			$printer->{cupsconfig}{customsharingsetup} = 0;
-		    }
-		}
-		# If we have no entry in the list, we do not
-		# share the local printers, mark this
-		if ($#{$printer->{cupsconfig}{clientnetworks}} < 0) {
-		    $printer->{cupsconfig}{localprintersshared} = 0;
-		    $printer->{cupsconfig}{remotebroadcastsaccepted} = 0;
-		}
-	    } elsif ($buttonclicked eq "browsepoll") {
-		# Show dialog to add hosts to "BrowsePoll" from
-		my $subdone = 0;
-		my $choice;
-		while (!$subdone) {
-		    # Entry should be edited when double-clicked
-		    $buttonclicked = "edit";
-		    $in->ask_from_(
-			 { title => N("Accessing printers on remote CUPS servers"),
-			   messages => N("Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network."),
-			   ok => "",
-			   cancel => "",
-		         },
-			 # List the hosts
-			 [ { val => \$choice, format => \&translate,
-			     sort => 0, separator => "####",
-			     tree_expanded => 1,
-			     quit_if_double_click => 1,
-			     allow_empty_list => 1,
-			     list => $browsepoll->{list} },
-			   { val => N("Add server"), 
-			     type => 'button',
-			     clicked_may_quit => sub {
-				 $buttonclicked = "add";
-				 1; 
-			     } },
-			   { val => N("Edit selected server"), 
-			     type => 'button',
-			     clicked_may_quit => sub {
-				 $buttonclicked = "edit";
-				 1; 
-			     },
-			     disabled => sub {
-				 return $#{$browsepoll->{list}} < 0;
-			     } },
-			   { val => N("Remove selected server"), 
-			     type => 'button',
-			     clicked_may_quit => sub {
-				 $buttonclicked = "remove";
-				 1; 
-			     },
-			     disabled => sub {
-				 return $#{$browsepoll->{list}} < 0;
-			     } },
-			   { val => N("Done"), 
-			     type => 'button',
-			     clicked_may_quit => sub {
-				 $buttonclicked = "";
-				 $subdone = 1;
-				 1; 
-			     } },
-			   ]
-			 );
-		    if ($buttonclicked eq "add" ||
-			$buttonclicked eq "edit") {
-			my ($ip, $port);
-			if ($buttonclicked eq "add") {
-			    # Use default port
-			    $port = '631';
-			} else {
-			    if ($browsepoll->{invhash}{$choice} =~
-				/^([^:]+):([^:]+)$/) {
-				# Entry to edit has IP and port
-				$ip = $1;
-				$port = $2;
-			    } else {
-				# Entry is only an IP, no port, so take
-				# the default port 631
-				$ip = $browsepoll->{invhash}{$choice};
-				$port = '631';
-			    }
-			}
-			# Show the dialog
-			my $address;
-			my $oldaddress = 
-			    ($buttonclicked eq "edit" ?
-			     $browsepoll->{invhash}{$choice} : "");
-			if ($in->ask_from_(
-			     { title => N("Accessing printers on remote CUPS servers"),
-			       messages => N("Enter IP address and port of the host whose printers you want to use.") . ' ' .
-				   N("If no port is given, 631 will be taken as default."),
-			       callbacks => {
-				   complete => sub {
-				       if ($ip =~ /^\s*$/) {
-					   $in->ask_warn(N("Error"), N("Server IP missing!"));
-					   return 1, 0;
-				       }
-				       if ($ip !~ 
-					   /^\s*(\d+\.\d+\.\d+\.\d+)\s*$/) {
-					   $in->ask_warn(N("Error"), 
-N("The entered IP is not correct.\n") .
-N("Examples for correct IPs:\n") .
-  "192.168.100.194\n" .
-  "10.0.0.2\n"
-);
-					   return 1, 0;
-				       } else {
-					   $ip = $1;
-				       }
-				       if ($port !~ /\S/) {
-					   $port = '631';
-				       } elsif ($port !~ /^\s*(\d+)\s*$/) {
-					   $in->ask_warn(N("Error"), N("The port number should be an integer!"));
-					   return 1, 1;
-				       } else {
-					   $port = $1;
-				       }
-				       $address = "$ip:$port";
-				       # Check whether item is duplicate
-				       if ($address ne $oldaddress &&
-					   member($address,
-						  @{$printer->{cupsconfig}{BrowsePoll}})) {
-					   $in->ask_warn(N("Error"), 
-							 N("This server is already in the list, it cannot be added again.\n"));
-					   return 1, 0;
-				       }
-				       return 0;
-				   },
-			       },
-			   },
-			     # Ask for IP and port
-			     [ { val => \$ip, 
-				 label => N("IP address") },
-			       { val => \$port, 
-				 label => N("Port") },
-			       ],
-			     )) {
-			    # OK was clicked, insert new item into the list
-			    if ($buttonclicked eq "add") {
-				push(@{$printer->{cupsconfig}{BrowsePoll}},
-				     $address);
-			    } else {
-				@{$printer->{cupsconfig}{BrowsePoll}} =
-				    map { ($_ eq
-					  $browsepoll->{invhash}{$choice} ?
-					  $address : $_) }
-				        @{$printer->{cupsconfig}{BrowsePoll}};
-			    }
-			    # Refresh list of hosts
-			    $browsepoll = 
-			    printer::main::makebrowsepolllist($printer);
-			    # Position the list cursor on the new/modified
-			    # item
-			    $choice = $browsepoll->{hash}{$address};
-			}
-		    } elsif ($buttonclicked eq "remove") {
-			@{$printer->{cupsconfig}{BrowsePoll}} =
-			    grep { $_ ne $browsepoll->{invhash}{$choice} }
-			    @{$printer->{cupsconfig}{BrowsePoll}};
-			# Refresh list of hosts
-			$browsepoll = 
-			    printer::main::makebrowsepolllist($printer);
-		    }
-		}
-	    } elsif ($buttonclicked eq "daemonlesscups") {
-		my ($modechoice, $rserver);
-		if ($daemonless_cups) {
-		    $modechoice = N("On, Name or IP of remote server:");
-		    $rserver = $remote_cups_server;
-		} else {
-		    $modechoice = N("Off");
-		}
-		# Show the dialog
-		#my $address;
-		#my $oldaddress = 
-		#    ($buttonclicked eq "edit" ?
-		#     $sharehosts->{invhash}{$choice} : "");
-		if ($in->ask_from_
-		    ({ title => N("Remote CUPS server and no local CUPS daemon"),
-		       messages => N("In this mode the local CUPS daemon will be stopped and all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."),
-		       callbacks => {
-			   complete => sub {
-			       if ($modechoice eq 
-				   N("On, Name or IP of remote server:") &&
-				   $rserver =~ /^\s*$/) {
-				   
-				   $in->ask_warn(N("Error"), N("CUPS server name or IP address missing."));
-				   return 1, 1;
-			       }
-			       return 0;
-			   },
-		       },
-		   },
-		     # Show the widgets
-		     [ { val => \$modechoice, format => \&translate,
-			 type => 'list',
-			 sort => 0,
-			 list => [ N("Off"),
-				   N("On, Name or IP of remote server:") ]},
-		       { val => \$rserver, 
-			 disabled => sub {
-			     $modechoice ne 
-				 N("On, Name or IP of remote server:");
-			 } },
-		       ],
-		     )) {
-		    # OK was clicked, update the data
-		    $daemonless_cups = 
-			($modechoice eq N("On, Name or IP of remote server:"));
-		    $remote_cups_server = $rserver;
-		}
-	    } else {
-		# We have clicked "OK"
-		$retvalue = 1;
-		$maindone = 1;
-		# Write state for auto-correction of cupsd.conf
-		if ($oldautocorr != 
-		    $printer->{cupsconfig}{autocorrection}) {
-		    printer::main::set_cups_autoconf(
-			$printer->{cupsconfig}{autocorrection});
-		}
-		# Write state of japanese text printing mode
-		printer::main::set_jap_textmode($jap_textmode);
-		# Switch state of daemon-less CUPS mode and write
-		# client.conf
-		if (($daemonless_cups && $printer->{SPOOLER} ne "rcups") ||
-		    (!$daemonless_cups && $printer->{SPOOLER} eq "rcups")) {
-		    my $oldspooler = $printer->{SPOOLER};
-		    $printer->{SPOOLER} = ($daemonless_cups ? 
-					  "rcups" : "cups");
-		    if (install_spooler($printer, $security, $in->do_pkgs, $in, $upNetwork, 1)) {
-			printer::default::set_spooler($printer);
-			printer::main::write_client_conf
-			    ($daemonless_cups, $remote_cups_server);
-			$printer->{remote_cups_server} =
-			    $remote_cups_server;
-			# Get the queues of this spooler
-			my $w = $in->wait_message
-			    (N("Printerdrake"),
-			     N("Reading printer data..."));
-			printer::main::read_configured_queues($printer);
-			undef $w;
-			# Re-read the printer database next time
-			%printer::main::thedb = ();
-			assure_default_printer_is_set($printer, $in);
-		    } else {
-			$printer->{SPOOLER} = $oldspooler;
-		    }
-		} elsif ($daemonless_cups) {
-		    printer::main::write_client_conf($daemonless_cups,
-						     $remote_cups_server);
-		    $printer->{remote_cups_server} = $remote_cups_server;
-		} else {
-		    undef $printer->{remote_cups_server};
-		}
-		# Write cupsd.conf
-		printer::main::write_cups_config($printer);
-		my $w = 
-		    $in->wait_message(N("Printerdrake"),
-				      N("Restarting CUPS..."));
-		printer::main::write_cupsd_conf(
-		    @{$printer->{cupsconfig}{cupsd_conf}});
-		#- restart cups after updating configuration.
-		printer::main::SIGHUP_daemon($printer->{SPOOLER});
-		undef $w;
-	    }
-	} else {
-	    # Cancel clicked
-	    $maindone = 1;
-	}
-    }
-    printer::main::clean_cups_config($printer);
-    return $retvalue;
-}
-
-sub choose_printer_type {
-    my ($printer, $in, $upNetwork) = @_;
-    my $havelocalnetworks = check_network($printer, $in, $upNetwork, 1) &&
-	                    printer::detect::getIPsInLocalNetworks() != ();
-    $printer->{str_type} = $printer_type_inv{$printer->{TYPE}};
-    my $autodetect = 0;
-    $autodetect = 1 if $printer->{AUTODETECT};
-    my $timeout = 4000;
-    $timeout = $printer->{TIMEOUT} if defined($printer->{TIMEOUT});
-    my @printertypes = printer::main::printer_type($printer);
-    $in->ask_from_(
-		   { title => N("Select Printer Connection"),
-		     messages => N("How is the printer connected?") .
-			 if_($printer->{SPOOLER} eq "cups",
-			     N("
-Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected.")) .
-                          if_(!$havelocalnetworks,
-			      N("\nWARNING: No local network connection active, remote printers can neither be detected nor tested!")),
-		     },
-		   [
-		    { val => \$printer->{str_type},
-		      list => \@printertypes, 
-		      not_edit => 1, sort => 0,
-		      type => 'list' },
-		    { text => N("Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"),
-		      type => 'bool', val => \$autodetect },
-		    { val => N("Modify timeout for network printer auto-detection") ,
-		      type => 'button',
-		      clicked_may_quit => sub {
-			  local $::isWizard = 0;
-			  $in->ask_from_
-			      ({ title => N("Select Printer Connection"),
-				 messages => N("Enter the timeout for network printer auto-detection (in msec) here. ") .
-				     "\n\n" .
-				     N("The longer you choose the timeout, the more reliable the detections of network printers will be, but the scan can take longer then, especially if there are many machines with local firewalls in the network. "),
-				 callbacks => {
-				     complete => sub {
-					 if ($timeout !~ /^[0-9]+$/) {
-					     $in->ask_warn(N("Error"), N("The timeout must be a positive integer number!"));
-					     return 1, 0;
-					 }
-					 return 0;
-				     }
-				 }},
-			       [ { val => \$timeout } ] ); 
-			  0; 
-		      } },
-		    ],
-		   ) or return 0;
-    $printer->{TIMEOUT} = $timeout;
-    $printer->{AUTODETECT} = $autodetect ? 1 : undef;
-    $printer->{TYPE} = $printer_type{$printer->{str_type}};
-    1;
-}
-
-sub setup_printer_connection {
-    my ($printer, $in, $upNetwork) = @_;
-    # Choose the appropriate connection config dialog
-    my $done = 1;
-    for ($printer->{TYPE}) {
-	/LOCAL/    and setup_local_autoscan($printer, $in, $upNetwork) and last;
-	/LPD/      and setup_lpd(      $printer, $in, $upNetwork) and last;
-	/SOCKET/   and setup_socket(   $printer, $in, $upNetwork) and last;
-	/SMB/      and setup_smb(      $printer, $in, $upNetwork) and last;
-	/NCP/      and setup_ncp(      $printer, $in, $upNetwork) and last;
-	/URI/      and setup_uri(      $printer, $in, $upNetwork) and last;
-	/POSTPIPE/ and setup_postpipe( $printer, $in) and last;
-	$done = 0; last;
-    }
-    return $done;
-}
-
-sub first_time_dialog {
-    my ($printer, $in, $upNetwork) = @_;
-    local $::isEmbedded = 0;
-    return 1 if printer::default::get_spooler() || $::isInstall;
-
-    my $w = $in->wait_message(N("Printerdrake"), N("Checking your system..."));
-
-    # Auto-detect local printers
-    my @autodetected = printer::detect::local_detect();
-    $printer->{AUTODETECTEDLOCALPRINTERSFIRSTTIME} = \@autodetected if @autodetected;
-    my $msg = do {
-	if (@autodetected) {
-	    my @printerlist = 
-	      map {
-		  my $entry = $_->{val}{DESCRIPTION};
-		  $entry ||= "$_->{val}{MANUFACTURER} $_->{val}{MODEL}";
-		  if_($entry, "  -  $entry\n");
-	      } @autodetected;
-	    my $unknown_printers = @autodetected - @printerlist;
-	    if (@printerlist) {
-		my $unknown_msg = 
-		  $unknown_printers == 1 ? 
-		    "\n" . N("and one unknown printer") :
-		  $unknown_printers > 1 ?
-		    "\n" . N("and %d unknown printers", $unknown_printers) :
-		    '';
-		my $main_msg = 
-		  @printerlist > 1 ?
-		    N_("The following printers\n\n%s%s\nare directly connected to your system") :
-		  $unknown_printers ?
-		    N_("The following printer\n\n%s%s\nare directly connected to your system") :
-		    N_("The following printer\n\n%s%s\nis directly connected to your system");
-		sprintf($main_msg, join('', @printerlist), $unknown_msg);
-	    } else {
-		$unknown_printers == 1 ?
-		  N("\nThere is one unknown printer directly connected to your system") :
-		  N("\nThere are %d unknown printers directly connected to your system", $unknown_printers);
-	    }
-	} else {
-	    N("There are no printers found which are directly connected to your machine");
-	}
-    };
-    $msg .= N(" (Make sure that all your printers are connected and turned on).\n");
-
-    # Do we have a local network?
-
-    # If networking is configured, start it, but do not ask the user to
-    # configure networking.
-    my $havelocalnetworks = 
-	 check_network($printer, $in, $upNetwork, 1) && 
-           printer::detect::getIPsInLocalNetworks() != ();
-
-    # Finish building the dialog text
-    my $question = ($havelocalnetworks ?
-		    (@autodetected ?
-		     N("Do you want to enable printing on the printers mentioned above or on printers in the local network?\n") :
-		     N("Do you want to enable printing on printers in the local network?\n")) :
-		    (@autodetected ?
-		     N("Do you want to enable printing on the printers mentioned above?\n") :
-		     N("Are you sure that you want to set up printing on this machine?\n")));
-    my $warning = N("NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.", 80);
-    my $dialogtext = "$msg\n$question\n$warning";
-
-    # Close wait message
-    undef $w;
-
-    while (1) {
-	# Show dialog
-	my $do_it = N("Yes");
-	my $quit = N("Quit");
-	my @choices = ($do_it, $quit);
-	my $choice = $in->ask_from_list(N("Printerdrake"), $dialogtext, 
-					\@choices, $quit);
-	return 0 if $choice ne $do_it;
-    
-	if ($havelocalnetworks && !@autodetected ) {
-	    return set_cups_daemon_mode($printer, $in);
-	} else {
-	    $printer->{SPOOLER} = "cups";
-	    return 1;
-	}
-    }
-}
-
-sub configure_new_printers {
-    my ($printer, $in, $_upNetwork) = @_;
-
-    # This procedure auto-detects local printers and checks whether
-    # there is already a queue for them. If there is no queue for an
-    # auto-detected printer, a queue gets set up non-interactively.
-
-    # Experts can have weird things as self-made CUPS backends, so do not
-    # automatically pollute the system with unwished queues in expert
-    # mode
-    return 1 if $printer->{expert};
-    
-    # Wait message
-    my $w = $::noX || 
-	$in->wait_message(N("Printerdrake"),
-			  N("Searching for new printers..."));
-
-    # When HPOJ is running, it blocks the printer ports on which it is
-    # configured, so we stop it here. If it is not installed or not 
-    # configured, this command has no effect. We do not stop HPOJ if we are
-    # called by the hotplug script, as HPOJ reloads the parallel port
-    # kernel modules and causes a new hotplug signal which leads to
-    # recursive calls of the hotplug script.
-    require services;
-    services::stop("hpoj") if !$::noX;
-
-    # Auto-detect local printers
-    my @autodetected = printer::detect::local_detect();
-    $printer->{AUTODETECTEDPRINTERSNONINTERACTIVE} = \@autodetected if @autodetected;
-
-    # We are ready with auto-detection, so we restart HPOJ here. If it 
-    # is not installed or not configured, this command has no effect.
-    services::start("hpoj") if !$::noX;
-
-    # No printer found? So no need of new queues.
-    return 1 if !@autodetected;
-
-    # Black-list all auto-detected printers for which there is already
-    # a queue
-    my @blacklist;
-    foreach my $queue (keys %{$printer->{configured}}) {
-	# Does the URI of this installed queue match one of the autodetected
-	# printers?
-	my $uri = $printer->{configured}{$queue}{queuedata}{connect};
-	my $p = printer::main::autodetectionentry_for_uri(
-	    $uri, @autodetected);
-	if (defined($p)) {
-	    # Blacklist the port
-	    push(@blacklist, $p->{port});
-	}
-    }
-
-    # Now install queues for all auto-detected printers which have no queue
-    # yet
-    $printer->{noninteractive} = 1; # Suppress all interactive steps
-    foreach my $p (@autodetected) {
-	if (!member($p->{port}, @blacklist)) {
-	    # Initialize some variables for queue setup
-	    $printer->{NEW} = 1;
-	    $printer->{TYPE} = "LOCAL";
-	    $printer->{currentqueue} = { queue    => "",
-					 foomatic => 0,
-					 desc     => "",
-					 loc      => "",
-					 make     => "",
-					 model    => "",
-					 printer  => "",
-					 driver   => "",
-					 connect  => "",
-					 spooler  => $printer->{SPOOLER},
-				       };
-	    undef $w;
-	    $w = $::noX || 
-		$in->wait_message(N("Printerdrake"),
-				  N("Found printer on %s...",
-				    $p->{port}));
-	    # Do configuration of multi-function devices and look up
-	    # model name in the printer database
-	    setup_common($printer, $in, $p->{val}{DESCRIPTION}, $p->{port},
-			 1, @autodetected) or next;
-	    # Do the steps of queue setup
-	    get_db_entry($printer, $in);
-	    # Let the user choose the model manually if it could not be
-	    # auto-detected.
-	    if (!$printer->{DBENTRY}) {
-		# Skip this printer if we install print queues in a
-		# background without X access.
-		if ($::noX) {
-		    # Delete some variables
-		    foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE currentqueue NEW)) {
-			$printer->{$_} = "";
-		    }
-		    next;
-		}
-		# Set the OLD_CHOICE to a non-existing value
-		$printer->{OLD_CHOICE} = "XXX";
-		# Set model selection cursor onto the "Raw Printer" entry.
-		$printer->{DBENTRY} = N("Raw printer (No driver)");
-		# Info about what was detected
-		my $info = N("(") . if_($p->{val}{DESCRIPTION},
-					$p->{val}{DESCRIPTION} . N(" on ")) .
-					$p->{port} . N(")");
-		# Remove wait message
-		undef $w;
-		# Choose the printer/driver from the list
-		$printer->{DBENTRY} = 
-		    $in->ask_from_treelist(N("Printer model selection"),
-					   N("Which printer model do you have?") .
-					   N("
-
-Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list.", $info) . " " .
-					   N("If your printer is not listed, choose a compatible (see printer manual) or a similar one."), '|',
-					   [ keys %printer::main::thedb ], $printer->{DBENTRY}) or next;
-		# Restore wait message
-		$w = $::noX ||
-		    $in->wait_message(N("Printerdrake"),
-				      N("Configuring printer on %s...",
-					$p->{port}));
-	    }
-	    get_printer_info($printer, $in) or next;
-	    setup_options($printer, $in) or next;
-	    my $_queue = generate_queuename($printer);
-	    # Change wait message
-	    undef $w;
-	    $w = $::noX || 
-		$in->wait_message(N("Printerdrake"),
-				  N("Configuring printer \"%s\"...",
-				    $printer->{currentqueue}{queue}));
-	    # Create the queue
-	    configure_queue($printer, $in) or next;
-	    # If there is no default printer set, let this one get the
-	    # default
-	    if (!$printer->{DEFAULT}) {
-		$printer->{DEFAULT} = $printer->{QUEUE};
-		printer::default::set_printer($printer);
-	    }
-	}
-	# Delete some variables
-	foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)) {
-	    $printer->{$_} = "";
-	}
-	$printer->{currentqueue} = {};
-	$printer->{complete} = 0;
-    }
-    undef $printer->{noninteractive};
-}
-
-sub generate_queuename {
-    my ($printer) = @_;
-    my $queue;
-    if ($printer->{currentqueue}{model}) {
-	if ($printer->{currentqueue}{model} eq N("Unknown model")) {
-	    $queue = "P";
-	} else {
-	    $queue = $printer->{currentqueue}{make} . '|' .
-		$printer->{currentqueue}{model};
-	}
-    } else {
-	$queue = $printer->{DBENTRY};
-    }
-    $queue =~ s/\|/ /g;
-    $printer->{currentqueue}{desc} = $queue;
-    $queue =~ s/series//gi;
-    $queue =~ s/[\s\(\)\-,]//g;
-    my $make = $printer->{currentqueue}{make};
-    my $model = $printer->{currentqueue}{model};
-    $queue =~ s/$make$make/$make/gi;
-    # Remove weird characters
-    $queue =~ s/[^A-Za-z0-9_]//g; 
-    $make =~ s/[^A-Za-z0-9_]//g; 
-    $model =~ s/[^A-Za-z0-9_]//g; 
-    # Do not use a queue name longer than 12 characters, as otherwise
-    # Windows clients will not be able to access the printer
-    my $ml = 12;
-    if (length($queue) > $ml) {
-	my %parts;
-	$parts{'make'} = $make;
-	$parts{'model'} = $model;
-	# Go through the two components, begin with model name, then
-	# make and then driver
-	for my $part (qw/model make/) {
-	    $parts{$part} =~ s/[^a-zA-Z0-9_]/ /g; 
-
-	    # Split the component into words, cutting always at the
-	    # right edge of the word. Cut also at a capital in the
-	    # middle of the word (ex: "S" in "PostScript").
-	    my @words =
-		split(/(?<=[a-zA-Z])(?![a-zA-Z])|(?<=[a-z])(?=[A-Z])/,
-		      $parts{$part});
-	    # Go through all words
-	    for (@words) {
-		# Do not abbreviate words of less than 3 letters
-		next if ($_ !~ /[a-zA-Z]{3,}$/);
-	        while (1) {
-		    # Remove the last letter
-		    chop;
-		    # Build the shortened component ...
-		    $parts{$part} = join('', @words);
-		    # ... and the queue name
-		    $queue = "$parts{'make'} $parts{'model'}";
-		    $queue =~ s/\s+//g;
-		    # Stop if the queue name has 12 characters or
-		    # less, if there is only one letter left, or if
-		    # the manufacturer name is reduced to three
-		    # characters.
-		    last if ((length($queue) <= $ml) ||
-			     ($_ !~ /[a-zA-Z]{2,}$/) ||
-			     (($part eq 'make') && 
-			      (length($parts{'make'}) <= 3)));
-		}
-		$parts{$part} = join('', @words);
-		$queue = "$parts{'make'} $parts{'model'}";
-		$queue =~ s/\s+//g;
-		last if (length($queue) <= $ml);
-	    }
-	    last if (length($queue) <= $ml);
-	}
-	while ((length($queue) > $ml) &&
-	       (length($parts{'model'}) > 3)) {
-	    # Queue name too long? Remove last words from model name.
-	    $parts{'model'} =~
-		s/[^a-zA-Z0-9]+[a-zA-Z0-9]*$// || last;
-	    $queue = "$parts{'make'} $parts{'model'}";
-	    $queue =~ s/\s+//g;
-	}
-	if (length($queue) > $ml) {
-	    # If nothing else helps ...
-	    $queue = substr($queue, 0, $ml);
-	}
-    }
-
-    # Append a number if the queue name already exists
-    if ($printer->{configured}{$queue}) {
-	my $origname = $queue;
-	my $i = 1;
-	while (1) {
-	    my $ol = length($origname);
-	    my $nl = length($i);
-	    my $us = ($origname =~ m/\d$/ ? 1 : 0);
-	    if ($ol + $nl + $us <= $ml) {
-		$queue = $origname . ($us ? '_' : '') . $i;
-	    } else {
-		$queue = substr($queue, 0, $ml - $nl);
-		$queue =~ s/\d$/_/;
-		$queue .= $i;
-	    }
-	    last if (!$printer->{configured}{$queue});
-	    $i ++;
-	}
-    }
-
-    $printer->{currentqueue}{queue} = $queue;
-    $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
-    return $queue;
-}
-
-sub wizard_welcome {
-    my ($printer, $in, $upNetwork) = @_;
-    local $::isEmbedded = 0;
-    my $ret;
-    my $autodetectlocal = 0;
-    my $autodetectnetwork = 0;
-    my $autodetectsmb = 0;
-    my $configlpd = 0;
-    # If networking is configured, start it, but do not ask the user to
-    # configure networking.
-    my $havelocalnetworks;
-    if ($printer->{expert}) {
-	$havelocalnetworks = 0;
-	undef $printer->{AUTODETECTNETWORK};
-	undef $printer->{AUTODETECTSMB};
-    } else {
-	$havelocalnetworks = check_network($printer, $in, $upNetwork, 1) &&
-			      printer::detect::getIPsInLocalNetworks() != ();
-	if (!$havelocalnetworks) {
-	    undef $printer->{AUTODETECTNETWORK};
-	    undef $printer->{AUTODETECTSMB};
-	}
-	$autodetectlocal = 1 if $printer->{AUTODETECTLOCAL};
-	$autodetectnetwork = 1 if $printer->{AUTODETECTNETWORK};
-	$autodetectsmb = 1 if $printer->{AUTODETECTSMB};
-	$configlpd = 1 if $printer->{CONFIGLPD};
-    }
-    my $oldautodetectlocal = $autodetectlocal;
-    my $oldautodetectnetwork = $autodetectnetwork;
-    my $oldautodetectsmb = $autodetectsmb;
-    my $oldconfiglpd = $configlpd;
-    if ($in) {
-	eval {
-	    if ($printer->{expert}) {
-		if ($::isWizard) {
-		    $ret = $in->ask_okcancel(
-			 N("Add a new printer"),
-			 N("
-Welcome to the Printer Setup Wizard
-
-This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.
-
-It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types."));
-		} else {
-		    $ret = 1;
-		}
-	    } else {
-		$ret = $in->ask_from_(
-		     { title => N("Add a new printer"),
-		       messages => ($printer->{SPOOLER} ne "pdq" ? 
-				   ($havelocalnetworks ? N("
-Welcome to the Printer Setup Wizard
-
-This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.
-
-Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.
-
-Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you do not need it.
-
- Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now.") : N("
-Welcome to the Printer Setup Wizard
-
-This wizard will help you to install your printer(s) connected to this computer.
-
-Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.
-
- Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now.")) : 
-				   ($havelocalnetworks ? N("
-Welcome to the Printer Setup Wizard
-
-This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.
-
-If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.
-
-Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you do not need it.
-
- Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now.") : N("
-Welcome to the Printer Setup Wizard
-
-This wizard will help you to install your printer(s) connected to this computer.
-
-If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.
-
- Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."))),
-                       callbacks => {
-			   changed => sub {
-			       if ($oldautodetectlocal ne
-				   $autodetectlocal) {
-				   if ($autodetectlocal) {
-				       $configlpd = 0;
-				       $oldconfiglpd = 0;
-				   }
-				   $oldautodetectlocal = $autodetectlocal;
-			       }
-			       if ($oldautodetectnetwork ne
-				   $autodetectnetwork) {
-				   if ($autodetectnetwork) {
-				       $configlpd = 0;
-				       $oldconfiglpd = 0;
-				   }
-				   $oldautodetectnetwork =
-				       $autodetectnetwork;
-			       }
-			       if ($oldautodetectsmb ne
-				   $autodetectsmb) {
-				   if ($autodetectsmb) {
-				       $configlpd = 0;
-				       $oldconfiglpd = 0;
-				   }
-				   $oldautodetectsmb = $autodetectsmb;
-			       }
-			       if ($oldconfiglpd ne $configlpd) {
-				   if ($configlpd) {
-				       $autodetectlocal = 0;
-				       $autodetectnetwork = 0;
-				       $autodetectsmb = 0;
-				       $oldautodetectlocal = 0;
-				       $oldautodetectnetwork = 0;
-				       $oldautodetectsmb = 0;
-				   }
-				   $oldconfiglpd = $configlpd;
-			       }
-			       return 0;
-			   }
-		       }
-                      },
-		     [
-		      { text => N("Auto-detect printers connected to this machine"), type => 'bool',
-			val => \$autodetectlocal },
-		           if_($havelocalnetworks,
-		      { text => N("Auto-detect printers connected directly to the local network"), type => 'bool',
-			val => \$autodetectnetwork },
-			   if_($printer->{SPOOLER} ne "pdq",
-		      { text => N("Auto-detect printers connected to machines running Microsoft Windows"), type => 'bool',
-			val => \$autodetectsmb },
-		      { text => N("Printer on remote lpd server")
-			    . " (" . N("No auto-detection") . ")",
-		        type => 'bool',
-			val => \$configlpd })),
-		      ]);
-		$printer->{AUTODETECTLOCAL} = $autodetectlocal ? 1 : undef;
-		$printer->{AUTODETECTNETWORK} = $autodetectnetwork ? 1 : undef;
-		$printer->{AUTODETECTSMB} = $autodetectsmb && $printer->{SPOOLER} ne "pdq" ? 1 : undef;
-		$printer->{CONFIGLPD} = $configlpd ? 1 : undef;
-		$printer->{TIMEOUT} = 4000;
-	    }
-	};
-	return $@ =~ /wizcancel/ ? 0 : $ret;
-    }
-}
-
-sub wizard_congratulations {
-    my ($in) = @_;
-    local $::isEmbedded = 0;
-    if ($in) {
-	$in->ask_okcancel(N("Add a new printer"),
-			  N("
-Congratulations, your printer is now installed and configured!
-
-You can print using the \"Print\" command of your application (usually in the \"File\" menu).
-
-If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the %s Control Center.", $shortdistroname))
-    }
-}
-
-sub setup_local_autoscan {
-    my ($printer, $in, $upNetwork) = @_;
-    local $::isEmbedded = 0;
-    my $queue = $printer->{OLD_QUEUE};
-    my $expert_or_modify = $printer->{expert} || !$printer->{NEW};
-    my $do_auto_detect = 
-	($expert_or_modify &&
-	  $printer->{AUTODETECT} ||
-	 (!$expert_or_modify &&
-	  ($printer->{AUTODETECTLOCAL} ||
-	   $printer->{AUTODETECTNETWORK} ||
-	   $printer->{AUTODETECTSMB})));
-
-    # If the user requested auto-detection of remote printers, check
-    # whether the network functionality is configured and running
-    if ($printer->{AUTODETECTNETWORK} || $printer->{AUTODETECTSMB}) {
-	return 0 unless check_network($printer, $in, $upNetwork, 0);
-    }
-
-    my @autodetected;
-    my $menuentries = {};
-#    $in->set_help('setupLocal') if $::isInstall;
-    if ($do_auto_detect) {
-	if (!$::testing &&
-	    !$expert_or_modify && $printer->{AUTODETECTSMB} && !files_exist('/usr/bin/smbclient')) {
-	    $in->do_pkgs->install('samba-client') or do {
-		$in->ask_warn(N("Warning"),
-			      N("Could not install the %s packages!",
-				"Samba client") . " " .
-			      N("Skipping Windows/SMB server auto-detection"));
-		$printer->{AUTODETECTSMB} = 0;
-		return 0 if !$printer->{AUTODETECTLOCAL} &&
-			     !$printer->{AUTODETECTNETWORK};
-	    };
-	}
-	my $_w = $in->wait_message(N("Printer auto-detection"), N("Detecting devices..."));
-	# When HPOJ is running, it blocks the printer ports on which it is
-	# configured, so we stop it here. If it is not installed or not 
-	# configured, this command has no effect.
-	require services;
-	services::stop("hpoj");
-	@autodetected = (
-	    $expert_or_modify || $printer->{AUTODETECTLOCAL} ? printer::detect::local_detect() : (),
-	    !$expert_or_modify ? printer::detect::whatNetPrinter($printer->{AUTODETECTNETWORK}, $printer->{AUTODETECTSMB}, $printer->{TIMEOUT}) : (),
-        );
-	$printer->{AUTODETECTEDPRINTERSADDPRINTERSTANDARD} = \@autodetected if @autodetected;
-	# We have more than one printer, so we must ask the user for a queue
-	# name in the fully automatic printer configuration.
-	$printer->{MORETHANONE} = $#autodetected > 0;
-	my @str;
-	foreach my $p (@autodetected) {
-	    if (($p->{val}{DESCRIPTION}) || ($p->{val}{MODEL})) {
-		my $menustr = ($p->{val}{DESCRIPTION} ?
-			       $p->{val}{DESCRIPTION} :
-			       (($p->{val}{MANUFACTURER} ? 
-				 ($p->{val}{MANUFACTURER} . " ") : ()) .
-				$p->{val}{MODEL}));
-		if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
-                    my $port = $1;
-		    $menustr .= N(" on parallel port #%s", $port);
-		} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
-                    my $printer = $1;
-		    $menustr .= N(", USB printer #%s", $printer);
-		} elsif ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) {
-                    my ($printer, $port) = ($1, $2);
-		    $menustr .= N(", network printer \"%s\", port %s", $printer, $port);
-		} elsif ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
-                    my ($server, $printer) = ($1, $2);
-		    $menustr .= N(", printer \"%s\" on SMB/Windows server \"%s\"", $printer, $server);
-		}
-		$menustr .= " ($p->{port})" if $printer->{expert};
-		$menuentries->{$menustr} = $p->{port};
-		push @str, N("Detected %s", $menustr);
-	    } else {
-		my $menustr;
-		if ($p->{port} =~ m!^/dev/lp(\d+)$!) {
-                    my $port = $1;
-		    $menustr = N("Printer on parallel port #%s", $port);
-		} elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) {
-                    my $printer = $1;
-		    $menustr = N("USB printer #%s", $printer);
-		} elsif ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) {
-                    my ($printer, $port);
-		    $menustr .= N("Network printer \"%s\", port %s", $printer, $port);
-		} elsif ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
-                    my ($server, $printer) = ($1, $2);
-		    $menustr .= N("Printer \"%s\" on SMB/Windows server \"%s\"", $printer, $server);
-		}
-		$menustr .= " ($p->{port})" if $printer->{expert};
-		$menuentries->{$menustr} = $p->{port};
-	    }
-	}
-	my @port;
-	if ($printer->{expert}) {
-	    @port = printer::detect::whatPrinterPort();
-	  LOOP: foreach my $q (@port) {
-		if (@str) {
-		    foreach my $p (@autodetected) {
-			last LOOP if $p->{port} eq $q;
-		    }
-		}
-		my $menustr;
-		if ($q =~ m!^/dev/lp(\d+)$!) {
-                    my $port = $1;
-		    $menustr = N("Printer on parallel port #%s", $port);
-		} elsif ($q =~ m!^/dev/usb/lp(\d+)$!) {
-                    my $printer;
-		    $menustr = N("USB printer #%s", $printer);
-		}
-		$menustr .= " ($q)" if $printer->{expert};
-		$menuentries->{$menustr} = $q;
-	    }
-	}
-	# We are ready with auto-detection, so we restart HPOJ here. If it 
-	# is not installed or not configured, this command has no effect.
-	printer::services::start("hpoj");
-    } else {
-	# Always ask for queue name in recommended mode when no auto-
-	# detection was done
-	$printer->{MORETHANONE} = $#autodetected > 0;
-	my $m;
-	for ($m = 0; $m <= 2; $m++) {
-	    my $menustr = N("Printer on parallel port #%s", $m);
-	    $menustr .= " (/dev/lp$m)" if $printer->{expert};
-	    $menuentries->{$menustr} = "/dev/lp$m";
-	    $menustr = N("USB printer #%s", $m);
-	    $menustr .= " (/dev/usb/lp$m)" if $printer->{expert};
-	    $menuentries->{$menustr} = "/dev/usb/lp$m";
-	}
-    }
-    my @menuentrieslist = sort { 
-	my @prefixes = ("/dev/lp", "/dev/usb/lp", "/dev/", "socket:", 
-			"smb:");
-	my $first = $menuentries->{$a};
-	my $second = $menuentries->{$b};
-	for (my $i = 0; $i <= $#prefixes; $i++) {
-	    my $firstinlist = $first =~ m!^$prefixes[$i]!;
-	    my $secondinlist = $second =~ m!^$prefixes[$i]!;
-	    if ($firstinlist && !$secondinlist) { return -1 };
-	    if ($secondinlist && !$firstinlist) { return 1 };
-	}
-	return $first cmp $second;
-    } keys(%$menuentries);
-    my $menuchoice = "";
-    my $oldmenuchoice = "";
-    my $device;
-    if ($printer->{configured}{$queue}) {
-	my $p = printer::main::autodetectionentry_for_uri(
-	    $printer->{currentqueue}{connect}, @autodetected);
-	if (defined($p)) {
-	    $device = $p->{port};
-	    $menuchoice = { reverse %$menuentries }->{$device};
-	}
-    }
-    if ($menuchoice eq "" && @menuentrieslist > -1) {
-	$menuchoice = $menuentrieslist[0];
-	$oldmenuchoice = $menuchoice;
-	$device = $menuentries->{$menuchoice} if $device eq "";
-    }
-    if ($in) {
-#	$printer->{expert} or $in->set_help('configurePrinterDev') if $::isInstall;
-	if ($#menuentrieslist < 0) { # No menu entry
-	    # auto-detection has failed, we must do all manually
-	    $do_auto_detect = 0;
-	    $printer->{MANUAL} = 1;
-	    if ($printer->{expert}) {
-		$device = $in->ask_from_entry(
-		     N("Local Printer"),
-		     N("No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."),
-		     { 
-			 complete => sub {
-			     if ($menuchoice eq "") {
-				 $in->ask_warn(N("Error"), N("You must enter a device or file name!"));
-				 return 1, 0;
-			     }
-			     return 0;
-			 }
-		     });
-		return 0 if $device eq "";
-	    } else {
-		$in->ask_warn(N("Printer auto-detection"),
-			      N("No printer found!"));
-		return 0;
-	    }
-	} else {
-	    my $manualconf = 0;
-	    $manualconf = 1 if $printer->{MANUAL} || !$do_auto_detect;
-	    if (!$in->ask_from_(
-		 { title => ($expert_or_modify ?
-			     N("Local Printers") :
-			     N("Available printers")),
-		   messages => (($do_auto_detect ?
-				 ($printer->{expert} ?
-				  (@menuentrieslist == 1 ?
-				   (N("The following printer was auto-detected. ") .
-				    ($printer->{NEW} ?
-				     N("If it is not the one you want to configure, enter a device name/file name in the input line") :
-				     N("Alternatively, you can specify a device name/file name in the input line"))) :
-				   (N("Here is a list of all auto-detected printers. ") .
-				    ($printer->{NEW} ?
-				     N("Please choose the printer you want to set up or enter a device name/file name in the input line") :
-				     N("Please choose the printer to which the print jobs should go or enter a device name/file name in the input line")))) :
-				  (@menuentrieslist == 1 ?
-				   (N("The following printer was auto-detected. ") .
-				    ($printer->{NEW} ?
-				     N("The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\".") : 
-				     N("Currently, no alternative possibility is available"))) :
-				   (N("Here is a list of all auto-detected printers. ") .
-				    ($printer->{NEW} ?
-				     N("Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\".") :
-				     N("Please choose the printer to which the print jobs should go."))))) :
-				 ($printer->{expert} ?
-				  N("Please choose the port that your printer is connected to or enter a device name/file name in the input line") :
-				  N("Please choose the port that your printer is connected to."))) .
-				if_($printer->{expert},
-				    N(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."))), 
-				  callbacks => {
-				      complete => sub {
-					  unless ($menuchoice ne "") {
-					      $in->ask_warn(N("Error"), N("You must choose/enter a printer/device!"));
-					      return 1, 0;
-					  }
-					  return 0;
-				      },
-				      changed => sub {
-					  if ($oldmenuchoice ne $menuchoice) {
-					      $device = $menuentries->{$menuchoice};
-					      $oldmenuchoice = $menuchoice;
-					  }
-					  return 0;
-				      }
-				  } },
-		 [
-		  if_($printer->{expert}, { val => \$device }),
-		  { val => \$menuchoice, list => \@menuentrieslist, 
-		    not_edit => !$printer->{expert}, format => \&translate,
-		    allow_empty_list => 1, type => 'list' },
-		  if_(!$printer->{expert} && $do_auto_detect && $printer->{NEW}, 
-		   { text => N("Manual configuration"), type => 'bool',
-		     val => \$manualconf }),
-		  ]
-		 )) {
-		return 0;
-	    }
-	    if ($device ne $menuentries->{$menuchoice}) {
-		$menuchoice = "";
-		$do_auto_detect = 0;
-	    }
-	    $printer->{MANUAL} = $manualconf ? 1 : undef;
-	}
-    }
-
-    #- LPD and LPRng need netcat ('nc') to access to socket printers
-    if (($printer->{SPOOLER} eq 'lpd' || $printer->{SPOOLER} eq 'lprng') &&
-        !$::testing && $device =~ /^socket:/ && !files_exist('/usr/bin/nc')) {
-        $in->do_pkgs->install('nc') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "nc") . " " .
-		N("Aborting"));
-	    return 0;
-        };
-    }
-
-    # Do configuration of multi-function devices and look up model name
-    # in the printer database
-    setup_common($printer, $in, $menuchoice, $device, $do_auto_detect,
-		  @autodetected);
-
-    1;
-}
-
-sub setup_lpd {
-    my ($printer, $in, $upNetwork) = @_;
-
-    local $::isEmbedded = 0;
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
-
-#    $in->set_help('setupLPD') if $::isInstall;
-    my ($uri, $remotehost, $remotequeue);
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue} &&
-	$printer->{currentqueue}{connect} =~ m/^lpd:/) {
-	$uri = $printer->{currentqueue}{connect};
-	if ($uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!) {
-         $remotehost = $1;
-         $remotequeue = $2;
-     }
-    } else {
-	$remotehost = "";
-	$remotequeue = "lp";
-    }
-
-    return if !$in->ask_from(N("Remote lpd Printer Options"),
-N("To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."), [
-{ label => N("Remote host name"), val => \$remotehost },
-{ label => N("Remote printer name"), val => \$remotequeue } ],
-complete => sub {
-    if ($remotehost eq "") {
-	$in->ask_warn(N("Error"), N("Remote host name missing!"));
-	return 1, 0;
-    }
-    if ($remotequeue eq "") {
-	$in->ask_warn(N("Error"), N("Remote printer name missing!"));
-	return 1, 1;
-    }
-    return 0;
-}
-			      );
-    #- make the DeviceURI from user input.
-    $printer->{currentqueue}{connect} = "lpd://$remotehost/$remotequeue";
-
-    #- LPD does not support filtered queues to a remote LPD server by itself
-    #- It needs an additional program as "rlpr"
-    if ($printer->{SPOOLER} eq 'lpd' && !$::testing &&
-        !files_exist('/usr/bin/rlpr')) {
-        $in->do_pkgs->install('rlpr') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "rlpr") . " " .
-		N("Aborting"));
-	    return 0;
-        };
-    }
-
-    # Auto-detect printer model (works if host is an ethernet-connected
-    # printer)
-    my $modelinfo = printer::detect::getSNMPModel($remotehost);
-    my $auto_hpoj;
-    if (defined($modelinfo) &&
-	$modelinfo->{MANUFACTURER} ne "" &&
-	$modelinfo->{MODEL} ne "") {
-	local $::isWizard = 0;
-        $in->ask_warn(N("Information"), N("Detected model: %s %s",
-                            $modelinfo->{MANUFACTURER}, $modelinfo->{MODEL}));
-        $auto_hpoj = 1;
-    } else {
-	$auto_hpoj = 0;
-    }
-
-    # Do configuration of multi-function devices and look up model name
-    # in the printer database
-    setup_common($printer, $in,
-		  "$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}", 
-		  $printer->{currentqueue}{connect}, $auto_hpoj,
-                  ({port => $printer->{currentqueue}{connect},
-                    val => $modelinfo }));
-
-    1;
-}
-
-sub setup_smb {
-    my ($printer, $in, $upNetwork) = @_;
-
-    local $::isEmbedded = 0;
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
-
-#    $in->set_help('setupSMB') if $::isInstall;
-    my ($uri, $smbuser, $smbpassword, $workgroup, $smbserver, $smbserverip, $smbshare);
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue} &&
-	$printer->{currentqueue}{connect} =~ m/^smb:/) {
-	$uri = $printer->{currentqueue}{connect};
-	my $parameters = $1 if $uri =~ m!^\s*smb://(.*)$!;
-	# Get the user's login and password from the URI
-	if ($parameters =~ m!([^@]*)@([^@]+)!) {
-	    my $login = $1;
-	    $parameters = $2;
-	    if ($login =~ m!([^:]*):([^:]*)!) {
-		$smbuser = $1;
-		$smbpassword = $2;
-	    } else {
-		$smbuser = $login;
-		$smbpassword = "";
-	    }
-	} else {
-	    $smbuser = "";
-	    $smbpassword = "";
-	}
-	# Get the workgroup, server, and share name
-	if ($parameters =~ m!([^/]*)/([^/]+)/([^/]+)$!) {
-	    $workgroup = $1;
-	    $smbserver = $2;
-	    $smbshare = $3;
-	} elsif ($parameters =~ m!([^/]+)/([^/]+)$!) {
-	    $workgroup = "";
-	    $smbserver = $1;
-	    $smbshare = $2;
-	} else {
-	    die qq(The "smb://" URI must at least contain the server name and the share name!\n);
-	}
-	if (is_ip($smbserver)) {
-	    $smbserverip = $smbserver;
-	    $smbserver = "";
-	}
-    }
-
-    my $autodetect = 0;
-    my @autodetected;
-    my $menuentries;
-    my @menuentrieslist;
-    my $menuchoice = "";
-    my $oldmenuchoice = "";
-    if ($printer->{AUTODETECT}) {
-	$autodetect = 1;
-	if (!$::testing && !files_exist('/usr/bin/smbclient')) {
-	    $in->do_pkgs->install('samba-client') or do {
-		$in->ask_warn(N("Error"),
-			      N("Could not install the %s packages!",
-				"Samba client") . " " .
-			      N("Aborting"));
-		return 0;
-	    };
-	}
-	my $_w = $in->wait_message(N("Printer auto-detection"), N("Scanning network..."));
-	@autodetected = printer::detect::net_smb_detect($printer->{TIMEOUT});
-	$printer->{AUTODETECTEDPRINTERSADDPRINTEREXPERTSMB} = \@autodetected if @autodetected;
-	my ($server, $share);
-	foreach my $p (@autodetected) {
-	    my $menustr;
-	    if ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
-             $server = $1;
-             $share = $2;
-         }
-	    if ($p->{val}{DESCRIPTION}) {
-		$menustr = $p->{val}{DESCRIPTION};
-		$menustr .= N(", printer \"%s\" on server \"%s\"",
-			      $share, $server);
-	    } else {
-		$menustr = N("Printer \"%s\" on server \"%s\"",
-			     $share, $server);
-	    }
-	    $menuentries->{$menustr} = $p->{port};
-	    if ($server eq $smbserver &&
-		$share eq $smbshare) {
-		$menuchoice = $menustr;
-	    }
-	}
-	@menuentrieslist = sort {
-	    $menuentries->{$a} cmp $menuentries->{$b};
-	} keys(%$menuentries);
-	if ($printer->{configured}{$queue} &&
-	    $printer->{currentqueue}{connect} =~ m/^smb:/ &&
-	    $menuchoice eq "") {
-	    my $menustr;
-	    if ($printer->{currentqueue}{make}) {
-		$menustr = "$printer->{currentqueue}{make} $printer->{currentqueue}{model}";
-		$menustr .= N(", printer \"%s\" on server \"%s\"",
-			      $smbshare, $smbserver);
-	    } else {
-		$menustr = N("Printer \"%s\" on server \"%s\"",
-			     $smbshare, $smbserver);
-	    }
-	    $menuentries->{$menustr} = "smb://$smbserver/$smbshare";
-	    unshift(@menuentrieslist, $menustr);
-	    $menuchoice = $menustr;
-	}
-	if ($#menuentrieslist < 0) {
-	    $autodetect = 0;
-	} elsif ($menuchoice eq "") {
-	    $menuchoice = $menuentrieslist[0];
-	    if ($menuentries->{$menuentrieslist[0]} =~
-		m!^smb://([^/:]+)/([^/:]+)$!) {
-             $smbserver = $1;
-             $smbshare = $2;
-         }
-	}
-	$oldmenuchoice = $menuchoice;
-    }
-
-    return 0 if !$in->ask_from(
-	 N("SMB (Windows 9x/NT) Printer Options"),
-	 N("To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.") .
-	 ($autodetect ? N(" If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.") : ""),
-	 [ 
-	  { label => N("SMB server host"), val => \$smbserver },
-	  { label => N("SMB server IP"), val => \$smbserverip },
-	  { label => N("Share name"), val => \$smbshare },
-	  { label => N("User name"), val => \$smbuser },
-	  { label => N("Password"), val => \$smbpassword, hidden => 1 },
-	  { label => N("Workgroup"), val => \$workgroup },
-	  if_($autodetect,
-	   { label => N("Auto-detected"),
-	     val => \$menuchoice, list => \@menuentrieslist, 
-	     not_edit => 1, format => \&translate, sort => 0,
-	     allow_empty_list => 1, type => 'combo' }) ],
-	 complete => sub {
-	     if (!is_ip($smbserverip) && $smbserverip ne "") {
-		 $in->ask_warn(N("Error"), N("IP address should be in format 1.2.3.4"));
-		 return 1, 1;
-	     }
-	     if ($smbserver eq "" && $smbserverip eq "") {
-		 $in->ask_warn(N("Error"), N("Either the server name or the server's IP must be given!"));
-		 return 1, 0;
-	     }
-	     if ($smbshare eq "") {
-		 $in->ask_warn(N("Error"), N("Samba share name missing!"));
-		 return 1, 2;
-	     }
-	     if ($smbpassword ne "") {
-		 local $::isWizard = 0;
-		 my $yes = $in->ask_yesorno(
-		      N("SECURITY WARNING!"),
-		      N("You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".
-
-We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):
-
-Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.
-
-Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.
-
-", N("Printer on remote lpd server")) .
-		      ($printer->{expert} ? 
-		       N("Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.
-
-", N("Enter a printer device URI")) : "") .
-N("Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.
-
-Do you really want to continue setting up this printer as you are doing now?"), 0);
-		 return 0 if $yes;
-		 return 1, 2;
-	     }
-	     return 0;
-	 },
-	 changed => sub {
-	     return 0 if !$autodetect;
-	     if ($oldmenuchoice ne $menuchoice) {
-		 if ($menuentries->{$menuchoice} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
-               $smbserver = $1;
-               $smbshare = $2;
-           }
-		 $oldmenuchoice = $menuchoice;
-	     }
-	     return 0;
-	 }
-	 );
-    #- make the DeviceURI from, try to probe for available variable to
-    #- build a suitable URI.
-    $printer->{currentqueue}{connect} =
-    join '', ("smb://", ($smbuser && ($smbuser . 
-    ($smbpassword && ":$smbpassword") . '@')), ($workgroup && "$workgroup/"),
-    ($smbserver || $smbserverip), "/$smbshare");
-
-    if (!$::testing && !files_exist('/usr/bin/smbclient')) {
-	$in->do_pkgs->install('samba-client') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "Samba client") . " " .
-		N("Aborting"));
-	    return 0;
-        };
-    }
-    $printer->{SPOOLER} eq 'cups' and printer::main::restart_queue($printer);
-    1;
-}
-
-sub setup_ncp {
-    my ($printer, $in, $upNetwork) = @_;
-
-    local $::isEmbedded = 0;
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
-
-#    $in->set_help('setupNCP') if $::isInstall;
-    my ($uri, $ncpuser, $ncppassword, $ncpserver, $ncpqueue);
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue} &&
-	$printer->{currentqueue}{connect} =~ m/^ncp:/) {
-	$uri = $printer->{currentqueue}{connect};
-	my $parameters = $uri =~ m!^\s*ncp://(.*)$!;
-	# Get the user's login and password from the URI
-	if ($parameters =~ m!([^@]*)@([^@]+)!) {
-	    my $login = $1;
-	    $parameters = $2;
-	    if ($login =~ m!([^:]*):([^:]*)!) {
-		$ncpuser = $1;
-		$ncppassword = $2;
-	    } else {
-		$ncpuser = $login;
-		$ncppassword = "";
-	    }
-	} else {
-	    $ncpuser = "";
-	    $ncppassword = "";
-	}
-	# Get the workgroup, server, and share name
-	if ($parameters =~ m!([^/]+)/([^/]+)$!) {
-	    $ncpserver = $1;
-	    $ncpqueue = $2;
-	} else {
-	    die qq(The "ncp://" URI must at least contain the server name and the share name!\n);
-	}
-    }
-
-    return 0 if !$in->ask_from(N("NetWare Printer Options"),
-N("To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."), [
-{ label => N("Printer Server"), val => \$ncpserver },
-{ label => N("Print Queue Name"), val => \$ncpqueue },
-{ label => N("User name"), val => \$ncpuser },
-{ label => N("Password"), val => \$ncppassword, hidden => 1 } ],
-complete => sub {
-    unless ($ncpserver ne "") {
-	$in->ask_warn(N("Error"), N("NCP server name missing!"));
-	return 1, 0;
-    }
-    unless ($ncpqueue ne "") {
-	$in->ask_warn(N("Error"), N("NCP queue name missing!"));
-	return 1, 1;
-    }
-    return 0;
-}
-					);
-    # Generate the Foomatic URI
-    $printer->{currentqueue}{connect} =
-    join '', ("ncp://", ($ncpuser && ($ncpuser . 
-    ($ncppassword && ":$ncppassword") . '@')),
-    "$ncpserver/$ncpqueue");
-
-    if (!$::testing && !files_exist('/usr/bin/nprint')) {
-	$in->do_pkgs->install('ncpfs') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "ncpfs") . " " .
-		N("Aborting"));
-	    return 0;
-        };
-    } 
-    1;
-}
-
-sub setup_socket {
-    my ($printer, $in, $upNetwork) = @_;
-
-    local $::isEmbedded = 0;
-    # Check whether the network functionality is configured and
-    # running
-    if (!check_network($printer, $in, $upNetwork, 0)) { return 0 };
-
-#    $in->set_help('setupSocket') if $::isInstall;
-
-    my ($uri, $remotehost, $remoteport);
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue} &&
-	$printer->{currentqueue}{connect} =~  m!^(socket:|ptal://?hpjd:)!) {
-	$uri = $printer->{currentqueue}{connect};
-	if ($uri =~ m!^ptal:!) {
-	    if ($uri =~ m!^ptal://?hpjd:([^/:]+):([0-9]+)/?\s*$!) {
-		my $ptalport = $2 - 9100;
-		($remotehost, $remoteport) = ($1, $ptalport);
-	    } elsif ($uri =~ m!^ptal://?hpjd:([^/:]+)\s*$!) {
-		($remotehost, $remoteport) = ($1, 9100);
-	    }
-	} else {
-	    ($remotehost, $remoteport) =
-		$uri =~ m!^\s*socket://([^/:]+):([0-9]+)/?\s*$!;
-	}
-    } else {
-	$remotehost = "";
-	$remoteport = "9100";
-    }
-
-    my $autodetect = 0;
-    my @autodetected;
-    my $menuentries;
-    my @menuentrieslist;
-    my $menuchoice = "";
-    my $oldmenuchoice = "";
-    my $detectedprinterchosen = 0;
-    if ($printer->{AUTODETECT}) {
-	$autodetect = 1;
-	my $_w = $in->wait_message(N("Printer auto-detection"), N("Scanning network..."));
-	@autodetected = printer::detect::net_detect($printer->{TIMEOUT});
-	$printer->{AUTODETECTEDPRINTERSEXPERTSOCKET} = \@autodetected if @autodetected;
-	my ($host, $port);
-	foreach my $p (@autodetected) {
-	    my $menustr;
-	    if ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) {
-             $host = $1;
-             $port = $2;
-         }
-	    if ($p->{val}{DESCRIPTION}) {
-		$menustr = $p->{val}{DESCRIPTION};
-		$menustr .= N(", host \"%s\", port %s",
-			      $host, $port);
-	    } else {
-		$menustr = N("Host \"%s\", port %s", $host, $port);
-	    }
-	    $menuentries->{$menustr} = $p->{port};
-	    if ($host eq $remotehost &&
-		$host eq $remotehost) {
-		$menuchoice = $menustr;
-		$detectedprinterchosen = 1;
-	    }
-	}
-	@menuentrieslist = sort { 
-	    $menuentries->{$a} cmp $menuentries->{$b};
-	} keys(%$menuentries);
-	if ($printer->{configured}{$queue} &&
-	    $printer->{currentqueue}{connect} =~ m!^(socket:|ptal://?hpjd:)! &&
-	    $menuchoice eq "") {
-	    my $menustr;
-	    if ($printer->{currentqueue}{make}) {
-		$menustr = "$printer->{currentqueue}{make} $printer->{currentqueue}{model}";
-		$menustr .= N(", host \"%s\", port %s",
-			      $remotehost, $remoteport);
-	    } else {
-		$menustr = N("Host \"%s\", port %s",
-			      $remotehost, $remoteport);
-	    }
-	    $menuentries->{$menustr} = "socket://$remotehost:$remoteport";
-	    unshift(@menuentrieslist, $menustr);
-	    $menuchoice = $menustr;
-	}
-	if ($#menuentrieslist < 0) {
-	    $autodetect = 0;
-	} elsif ($menuchoice eq "") {
-	    $menuchoice = $menuentrieslist[0];
-	    if ($menuentries->{$menuentrieslist[0]} =~ m!^socket://([^:]+):(\d+)$!) {
-             $remotehost = $1;
-             $remoteport = $2;
-	     $detectedprinterchosen = 1;
-         }
-	}
-	$oldmenuchoice = $menuchoice;
-    }
-
-    return 0 if !$in->ask_from_(
-	 {
-	     title => N("TCP/Socket Printer Options"),
-	     messages => ($autodetect ?
-			  N("Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.") :
-			  N("To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.")),
-		 callbacks => {
-		 complete => sub {
-		     unless ($remotehost ne "") {
-			 $in->ask_warn(N("Error"), N("Printer host name or IP missing!"));
-			 return 1, 0;
-		     }
-		     unless ($remoteport =~ /^[0-9]+$/) {
-			 $in->ask_warn(N("Error"), N("The port number should be an integer!"));
-			 return 1, 1;
-		     }
-		     return 0;
-		 },
-		 changed => sub {
-		     return 0 if !$autodetect;
-		     if ($oldmenuchoice ne $menuchoice) {
-			 if ($menuentries->{$menuchoice} =~
-			     m!^socket://([^:]+):(\d+)$!) {
-			     $remotehost = $1;
-			     $remoteport = $2;
-			     $detectedprinterchosen = 1;
-			 } else {
-			     $detectedprinterchosen = 0;
-			 }
-			 $oldmenuchoice = $menuchoice;
-		     } else {
-			 $detectedprinterchosen = 0;
-		     }
-		     return 0;
-		 }
-	     }
-	 },
-	 [
-	  { label => ($autodetect ? "" : N("Printer host name or IP")),
-	    val => \$remotehost },
-	  { label => ($autodetect ? "" : N("Port")), val => \$remoteport },
-	  if_($autodetect,
-	   { val => \$menuchoice, list => \@menuentrieslist, 
-	     not_edit => 0, format => \&translate, sort => 0,
-	     allow_empty_list => 1, type => 'list' })
-	  ]
-	 );
-    
-    #- make the Foomatic URI
-    $printer->{currentqueue}{connect} = 
-	join '', ("socket://$remotehost", $remoteport ? ":$remoteport" : ());
-
-    #- LPD and LPRng need netcat ('nc') to access to socket printers
-    if (($printer->{SPOOLER} eq 'lpd' || $printer->{SPOOLER} eq 'lprng') && 
-        !$::testing && !files_exist('/usr/bin/nc')) {
-        $in->do_pkgs->install('nc') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "nc") . " " .
-		N("Aborting"));
-	    return 0;
-	}
-    }
-
-    # Auto-detect printer model
-    my $modelinfo;
-    if ($printer->{AUTODETECT}) {
-	$modelinfo = printer::detect::getSNMPModel($remotehost);
-    }
-    my $auto_hpoj;
-    if (defined($modelinfo) &&
-	$modelinfo->{MANUFACTURER} ne "" &&
-	$modelinfo->{MODEL} ne "") {
-	if (!$detectedprinterchosen) {
-	    local $::isWizard = 0;
-	    $in->ask_warn(N("Information"), N("Detected model: %s %s",
-					      $modelinfo->{MANUFACTURER},
-					      $modelinfo->{MODEL}));
-	}
-        $auto_hpoj = 1;
-    } else {
-	$auto_hpoj = 0;
-    }
-
-    # Do configuration of multi-function devices and look up model name
-    # in the printer database
-    setup_common($printer, $in,
-		  "$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}", 
-		  $printer->{currentqueue}{connect}, $auto_hpoj,
-                  ({port => $printer->{currentqueue}{connect},
-                    val => $modelinfo }));
-    1;
-}
-
-sub setup_uri {
-    my ($printer, $in, $upNetwork) = @_;
-
-    local $::isEmbedded = 0;
-#    $in->set_help('setupURI') if $::isInstall;
-    if ($printer->{AUTODETECT} && $printer->{SPOOLER} eq 'cups') {
-	my $_w = $in->wait_message(N("Printerdrake"), 
-				   N("Refreshing Device URI list..."));
-	printer::services::restart("cups");
-    }
-    return if !$in->ask_from(N("Printer Device URI"),
-N("You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."), [
-{ label => N("Printer Device URI"),
-val => \$printer->{currentqueue}{connect},
-list => [ if_($printer->{currentqueue}{connect},
-	      $printer->{currentqueue}{connect}),
-	  ($printer->{SPOOLER} eq 'cups' ?
-	   printer::cups::lpinfo_v() :
-	   ("parallel:/",
-	    "usb:/",
-	    "serial:/",
-	    "http://",
-	    "ipp://",
-	    "lpd://",
-	    "smb://",
-	    "ncp://",
-	    "socket://",
-	    "ptal:/mlc:",
-	    "ptal:/hpjd:",
-	    "hp:/usb/",
-	    "hp:/par/",
-	    "hp:/net/",
-	    "file:/",
-	    'postpipe:""')),
-	  ], not_edit => 0, sort => 0 }, ],
-complete => sub {
-    unless ($printer->{currentqueue}{connect} =~ /[^:]+:.+/) {
-	$in->ask_warn(N("Error"), N("A valid URI must be entered!"));
-	return 1, 0;
-    }
-    return 0;
-}
-    );
-
-    # Non-local printer, check network and abort if no network available
-    if ($printer->{currentqueue}{connect} !~ m!^(file:|parallel:|usb:|serial:|mtink:|ptal://?mlc|hp:/(usb|par))! &&
-        !check_network($printer, $in, $upNetwork, 0)) { 
-        return 0;
-    # If the chosen protocol needs additional software, install it.
-    } elsif ($printer->{currentqueue}{connect} =~ /^lpd:/ &&
-        $printer->{SPOOLER} eq 'lpd' &&
-        !$::testing && !files_exist('/usr/bin/rlpr')) {
-	# LPD does not support filtered queues to a remote LPD server by itself
-	# It needs an additional program as "rlpr"
-        $in->do_pkgs->install('rlpr') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "rlpr") . " " .
-		N("Aborting"));
-		return 0;
-            };
-    } elsif ($printer->{currentqueue}{connect} =~ /^smb:/ &&
-        !$::testing && !files_exist('/usr/bin/smbclient')) {
-	$in->do_pkgs->install('samba-client') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "Samba client") . " " .
-		N("Aborting"));
-		return 0;
-            };
-    } elsif ($printer->{currentqueue}{connect} =~ /^ncp:/ &&
-	!$::testing && !files_exist('/usr/bin/nprint')) {
-	$in->do_pkgs->install('ncpfs') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "ncpfs") . " " .
-		N("Aborting"));
-		return 0;
-            };
-    } elsif ($printer->{currentqueue}{connect} =~ /^socket:/ &&
-	#- LPD and LPRng need netcat ('nc') to access to socket printers
-	($printer->{SPOOLER} eq 'lpd' || $printer->{SPOOLER} eq 'lprng') &&
-        !$::testing && !files_exist('/usr/bin/nc')) {
-        $in->do_pkgs->install('nc') or do {
-            $in->ask_warn(N("Error"),
-		N("Could not install the %s packages!",
-		  "nc") . " " .
-		N("Aborting"));
-		return 0;
-            };
-    }
-
-    if ($printer->{currentqueue}{connect} =~ m!^socket://([^:/]+)! ||
-        $printer->{currentqueue}{connect} =~ m!^lpd://([^:/]+)! ||
-        $printer->{currentqueue}{connect} =~ m!^http://([^:/]+)! ||
-        $printer->{currentqueue}{connect} =~ m!^ipp://([^:/]+)!) {
-	
-	# Auto-detect printer model (works if host is an ethernet-connected
-	# printer)
-	my $remotehost = $1;
-	my $modelinfo = printer::detect::getSNMPModel($remotehost);
-        my $auto_hpoj;
-        if (defined($modelinfo) &&
-            $modelinfo->{MANUFACTURER} ne "" &&
-	    $modelinfo->{MODEL} ne "") {
-	    local $::isWizard = 0;
-            $in->ask_warn(N("Information"), N("Detected model: %s %s",
-                                $modelinfo->{MANUFACTURER},
-				$modelinfo->{MODEL}));
-            $auto_hpoj = 1;
-        } else {
-	    $auto_hpoj = 0;
-        }
-
-        # Do configuration of multi-function devices and look up model name
-        # in the printer database
-        setup_common($printer, $in,
-		      "$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}", 
-		      $printer->{currentqueue}{connect}, $auto_hpoj,
-                      ({port => $printer->{currentqueue}{connect},
-                        val => $modelinfo }));
-    }
-
-    1;
-}
-
-sub setup_postpipe {
-    my ($printer, $in) = @_;
-
-    local $::isEmbedded = 0;
-#    $in->set_help('setupPostpipe') if $::isInstall;
-    my $uri;
-    my $commandline;
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue} &&
-	$printer->{currentqueue}{connect} =~ m/^postpipe:/) {
-	$uri = $printer->{currentqueue}{connect};
-	$commandline = $1 if $uri =~ m!^\s*postpipe:"(.*)"$!;
-    } else {
-	$commandline = "";
-    }
-
-    return if !$in->ask_from(N("Pipe into command"),
-N("Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."), [
-{ label => N("Command line"),
-val => \$commandline }, ],
-complete => sub {
-    unless ($commandline ne "") {
-	$in->ask_warn(N("Error"), N("A command line must be entered!"));
-	return 1, 0;
-    }
-    return 0;
-}
-);
-
-    #- make the Foomatic URI
-    $printer->{currentqueue}{connect} = "postpipe:$commandline";
-    
-    1;
-}
-
-sub setup_common {
-
-    my ($printer, $in, $makemodel, $device, $do_auto_detect, @autodetected) = @_;
-
-    local $::isEmbedded = 0;
-    #- Check whether the printer is an HP multi-function device and 
-    #- configure HPOJ if it is one
-
-    my $hplipdevice = "";
-    my $ptaldevice = "";
-    my $isHPOJ = 0;
-    my $isHPLIP = 0;
-    my $w;
-    if ($device =~ m!^/dev/! || $device =~ m!^socket://!) {
-	# Ask user whether he has a multi-function device when he did not
-	# do auto-detection or when auto-detection failed
-	my $searchunknown = N("Unknown model");
-	if (!$do_auto_detect ||
-	    $makemodel eq $searchunknown ||
-	    $makemodel =~ /^\s*$/) {
-	    local $::isWizard = 0;
-	    if (!$printer->{noninteractive}) {
-		if (($device =~ m!/usb/!) &&
-		    ($printer->{SPOOLER} eq 'cups')) {
-		    my $choice = $in->ask_from_list
-			(N("Add a new printer"),
-			 N("On many HP printers there are special functions available, maintenance (ink level checking, nozzle cleaning. head alignment, ...) on all not too old inkjets, scanning on multi-function devices, and memory card access on printers with card readers. ") .
-			 "\n\n" .
-			 N("To access these extra functions on your HP printer, it must be set up with the appropriate software: ") . 
-			 N("Either with the newer HPLIP which allows printer maintenance through the easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on newer PhotoSmart models ") .
-			 N("or with the older HPOJ which allows only scanner and memory card access, but could help you in case of failure of HPLIP. ") . 
-			 "\n\n" .
-			 N("What is your choice (choose \"None\" for non-HP printers)? "),
-			 [N("None"), N("HPLIP"), N("HPOJ")], N("None"));
-		    if ($choice eq N("HPLIP")) {
-			$isHPLIP = 1;
-		    } elsif ($choice eq N("HPOJ")) {
-			$isHPOJ = 1;
-		    }
-		} else {
-		    $isHPOJ = $in->ask_yesorno(N("Add a new printer"),
-					       N("Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"), 0);
-		}
-	    }
-	}
-	my $hplipentry;
-	if (($printer->{SPOOLER} eq 'cups') &&
-	    (($hplipentry =
-	      printer::main::hplip_device_entry($device, @autodetected)) ||
-	     $isHPLIP)) {
-	    # Device is supported by HPLIP
-
-	    # Install HPLIP packages
-	    my $hplipinstallfailed = 0;
-	    if (!$::testing &&
-		!files_exist(qw(/usr/sbin/hpiod))) {
-		if ($::noX) {
-		    $hplipinstallfailed = 1;
-		} else {
-		    $w = $in->wait_message(N("Printerdrake"),
-					   N("Installing %s package...",N("HPLIP")))
-			if !$printer->{noninteractive};
-		    $in->do_pkgs->install('hplip')
-			or do {
-			    $in->ask_warn(N("Warning"),
-					  N("Could not install the %s packages!",
-					    N("HPLIP")) . " " .
-					  N("Only printing will be possible on the %s.",
-					    $makemodel));
-			    $hplipinstallfailed = 1;
-			};
-		}
-	    }
-	    # Remove old HPOJ configuration for this device
-	    if (-f "/usr/sbin/ptal-mlcd") { # HPOJ installed?
-		if (my $configfile =
-		    printer::main::remove_hpoj_config($device, @autodetected)) {
-		    if (!$printer->{noninteractive} && !$::noX) {
-			undef $w;
-			local $::isWizard = 0;
-			$in->ask_warn
-			    (N("Error"),
-			     N("Could not remove your old HPOJ configuration file %s for your %s! ",
-			       $configfile, $makemodel) .
-			     N("Please remove the file manually and restart HPOJ."));
-		    }
-		}
-	    }
-	    # Start HPLIP and get device URI
-	    undef $w;
-	    $w = $in->wait_message(
-		 N("Printerdrake"),
-		 N("Checking device and configuring %s...",N("HPLIP")))
-		if !$printer->{noninteractive};
-
-	    if (!$hplipinstallfailed) {
-		if ($isHPLIP) {
-		    my @uris = printer::main::start_hplip_manual();
-		    my @menu; my %menuhash;
-		    for my $item (@uris) {
-			if ($item =~ m!^hp:/(usb|par|net)/(\S*?)(\?\S*|)$!){
-			    my $modelname = "HP " . $2;
-			    $modelname =~ s/_/ /g;
-			    push(@menu, $modelname);
-			    $menuhash{$modelname} = $item;
-			}
-		    }
-		    undef $w;
-		    local $::isWizard = 0;
-		    my $choice = $in->ask_from_list
-			(N("Add a new printer"),
-			 N("Which printer do you want to set up with HPLIP?"),
-			 \@menu, $menu[0]);
-		    $hplipdevice = $menuhash{$choice};
-		    $hplipentry = 
-			printer::main::hplip_device_entry_from_uri
-			($hplipdevice);
-		    $makemodel = $choice;
-		} else {
-		    $hplipdevice = printer::main::start_hplip
-			($device, $hplipentry, @autodetected);
-		}
-	    }
-
-	    if ($hplipdevice) {
-		# Configure scanning with SANE on HP's MF devices
-		if ($hplipentry->{scan}) {
-		    # Install SANE
-		    if (!$::testing &&
-			(!files_exist(qw(/usr/bin/scanimage
-					/usr/bin/xscanimage
-					/etc/sane.d/dll.conf
-					/usr/lib/libsane-hpaio.so.1)) ||
-			 (!files_exist(qw(/usr/bin/xsane)) &&
-			  !files_exist(qw(/usr/bin/kooka)) &&
-			  ($::isInstall ||
-			   !$in->do_pkgs->is_installed('scanner-gui'))))) {
-			undef $w;
-			$w = $in->wait_message(
-			     N("Printerdrake"),
-			     N("Installing SANE packages..."))
-			    if !$printer->{noninteractive};
-			$::noX
-			    or $in->do_pkgs->install('sane-backends',
-						     'sane-frontends',
-						     ($::isInstall ?
-						      'xsane' : 
-						      'scanner-gui'), 
-						     'libsane-hpaio1')
-			    or do {
-				$in->ask_warn(N("Warning"),
-					      N("Could not install the %s packages!",
-						"SANE") . " " .
-					      N("Scanning on the %s will not be possible.",
-						$makemodel));
-			    };
-		    }
-		    # Configure the HPLIP SANE backend
-		    printer::main::config_sane('hpaio');
-		}
-		if (!$printer->{noninteractive} && !$::noX) {
-		    my $text = "";
-		    # Inform user about how to use HPLIP extra functions
-		    $text = hplip_help($makemodel, $hplipdevice);
-		    if ($text) {
-			undef $w;
-			local $::isWizard = 0;
-			$in->ask_warn
-			    (N("Using and Maintaining your %s",
-			       $makemodel),
-			     $text);
-		    }
-		}
-		# Take the DeviceURI from $hplipdevice.
-		$printer->{currentqueue}{connect} = $hplipdevice;
-	    }
-	}
-	if (!$hplipdevice) {
-	    if ($makemodel =~ /HP\s+(OfficeJet|PSC|PhotoSmart|LaserJet\s+(1200|1220|2200|30(15|20|30)|3200|33.0|4345)|(DeskJet|dj)\s*450)/i ||
-		$makemodel =~ /Sony\s+IJP[\s\-]+V[\s\-]+100/i ||
-		$isHPOJ) {
-		# Install HPOJ package
-		my $hpojinstallfailed = 0;
-		if (!$::testing &&
-		    !files_exist(qw(/usr/sbin/ptal-mlcd
-				    /usr/sbin/ptal-init
-				    /usr/bin/xojpanel
-				    /usr/sbin/lsusb))) {
-		    if ($::noX) {
-			$hpojinstallfailed = 1;
-		    } else {
-			$w = $in->wait_message(N("Printerdrake"),
-					       N("Installing %s package...",N("HPOJ")))
-			    if !$printer->{noninteractive};
-			$in->do_pkgs->install('hpoj', 'xojpanel', 'usbutils')
-			    or do {
-				$in->ask_warn(N("Warning"),
-					      N("Could not install the %s packages!",
-						N("HPOJ")) . " " .
-					      N("Only printing will be possible on the %s.",
-						$makemodel));
-				$hpojinstallfailed = 1;
-			    };
-		    }
-		}
-		# Configure and start HPOJ
-		undef $w;
-		$w = $in->wait_message
-		    (N("Printerdrake"),
-		     N("Checking device and configuring %s...",N("HPOJ")))
-		    if !$printer->{noninteractive};
-		
-		eval { $ptaldevice = printer::main::configure_hpoj
-			   ($device, @autodetected) if !$hpojinstallfailed };
-		
-		if (my $err = $@) {
-		    warn qq(HPOJ conf failure: "$err");
-		    log::l(qq(HPOJ conf failure: "$err"));
-		}
-
-		if ($ptaldevice) {
-		    # HPOJ has determined the device name, make use of
-		    # it if we did not know it before
-		    if (!$do_auto_detect ||
-			!$makemodel ||
-			$makemodel eq $searchunknown ||
-			$makemodel =~ /^\s*$/) {
-			$makemodel = $ptaldevice;
-			$makemodel =~ s/^.*:([^:]+)$/$1/;
-			$makemodel =~ s/_/ /g;
-			if ($makemodel =~ /^\s*IJP/i) {
-			    $makemodel = "Sony $makemodel";
-			} else {
-			    $makemodel = "HP $makemodel";
-			}
-		    }
-		    # Configure scanning with SANE on the MF device
-		    if ($makemodel !~ /HP\s+PhotoSmart/i &&
-			$makemodel !~ /HP\s+LaserJet\s+2200/i &&
-			$makemodel !~ /HP\s+(DeskJet|dj)\s*450/i) {
-			# Install SANE
-			if (!$::testing &&
-			    (!files_exist(qw(/usr/bin/scanimage
-					     /usr/bin/xscanimage
-					     /etc/sane.d/dll.conf
-					     /usr/lib/libsane-hpoj.so.1)) ||
-			     (!files_exist(qw(/usr/bin/xsane)) &&
-			      !files_exist(qw(/usr/bin/kooka)) &&
-			      ($::isInstall ||
-			       !$in->do_pkgs->is_installed('scanner-gui'))))) {
-			    undef $w;
-			    $w = $in->wait_message
-				(N("Printerdrake"),
-				 N("Installing SANE packages..."))
-				if !$printer->{noninteractive};
-			    $::noX
-				or $in->do_pkgs->install('sane-backends',
-							 'sane-frontends',
-							 ($::isInstall ?
-							  'xsane' : 
-							  'scanner-gui'), 
-							 'libsane-hpoj1')
-				or do {
-				    $in->ask_warn(N("Warning"),
-						  N("Could not install the %s packages!",
-						    "SANE") . " " .
-						  N("Scanning on the %s will not be possible.",
-						    $makemodel));
-				};
-			}
-			# Configure the HPOJ SANE backend
-			printer::main::config_sane('hpoj');
-		    }
-		    # Configure photo card access with mtools and MToolsFM
-		    if (($makemodel =~ /HP\s+PhotoSmart/i ||
-			 $makemodel =~ /HP\s+PSC\s*9[05]0/i ||
-			 $makemodel =~ /HP\s+PSC\s*13[15]\d/i ||
-			 $makemodel =~ /HP\s+PSC\s*161\d/i ||
-			 $makemodel =~ /HP\s+PSC\s*2\d\d\d/i ||
-			 $makemodel =~ /HP\s+OfficeJet\s+D\s*1[45]5/i ||
-			 $makemodel =~ /HP\s+OfficeJet\s+71[34]0/i ||
-			 $makemodel =~ /HP\s+OfficeJet\s+91\d\d/i ||
-			 $makemodel =~ /HP\s+(DeskJet|dj)\s*450/i) &&
-			$makemodel !~ /HP\s+PhotoSmart\s+7150/i) {
-			# Install mtools and MToolsFM
-			if (!$::testing &&
-			    !files_exist(qw(/usr/bin/mdir
-					    /usr/bin/mcopy
-					    /usr/bin/MToolsFM
-					    ))) {
-			    undef $w;
-			    $w = $in->wait_message
-				(N("Printerdrake"),
-				 N("Installing mtools packages..."))
-				if !$printer->{noninteractive};
-			    $::noX
-				or $in->do_pkgs->install('mtools', 'mtoolsfm')
-				or do {
-				    $in->ask_warn(N("Warning"),
-						  N("Could not install the %s packages!",
-						    "Mtools") . " " .
-						  N("Photo memory card access on the %s will not be possible.",
-						    $makemodel));
-				};
-			}
-			# Configure mtools/MToolsFM for photo card access
-			printer::main::config_photocard();
-		    }
-		    
-		    if (!$printer->{noninteractive} && !$::noX) {
-			my $text = "";
-			# Inform user about how to scan with his MF device
-			$text = scanner_help($makemodel, "ptal://$ptaldevice");
-			if ($text) {
-			    undef $w;
-			    local $::isWizard = 0;
-			    $in->ask_warn
-				(N("Scanning on your HP multi-function device"),
-				 $text);
-			}
-			# Inform user about how to access photo cards with his 
-			# MF device
-			$text = photocard_help($makemodel, "ptal://$ptaldevice");
-			if ($text) {
-			    undef $w;
-			    local $::isWizard = 0;
-			    $in->ask_warn(N("Photo memory card access on your HP multi-function device"),
-					  $text);
-			}
-		    }
-		    # make the DeviceURI from $ptaldevice.
-		    $printer->{currentqueue}{connect} =
-			"ptal://" . $ptaldevice;
-		} else {
-		    # make the DeviceURI from $device.
-		    $printer->{currentqueue}{connect} = $device;
-		}
-	    } else {
-		# make the DeviceURI from $device.
-		$printer->{currentqueue}{connect} = $device;
-	    }
-	    $w = $in->wait_message(
-		 N("Printerdrake"),
-		 N("Configuring device..."))
-		if !$printer->{noninteractive} && !defined($w);
-	}
-    } else {
-	# make the DeviceURI from $device.
-	$printer->{currentqueue}{connect} = $device;
-    }
-
-    if ($printer->{currentqueue}{connect} !~ /:/) {
-	if ($printer->{currentqueue}{connect} =~ /usb/) {
-	    $printer->{currentqueue}{connect} =
-		"usb:" . $printer->{currentqueue}{connect};
-	} elsif ($printer->{currentqueue}{connect} =~ /(serial|tty)/) {
-	    $printer->{currentqueue}{connect} =
-		"serial:" . $printer->{currentqueue}{connect};
-	} elsif ($printer->{currentqueue}{connect} =~ 
-		 /(printers|parallel|parport|lp\d)/) {
-	    $printer->{currentqueue}{connect} =
-		"parallel:" . $printer->{currentqueue}{connect};
-	} else {
-	    $printer->{currentqueue}{connect} =
-		"file:" . $printer->{currentqueue}{connect};
-	}
-    }
-
-    #- if CUPS is the spooler, make sure that CUPS knows the device
-    if ($printer->{SPOOLER} eq "cups" &&
-	$device !~ /^lpd:/ &&
-	$device !~ /^smb:/ &&
-	$device !~ /^socket:/ &&
-	$device !~ /^http:/ &&
-	$device !~ /^ipp:/) {
-	my $_w = $in->wait_message(
-             N("Printerdrake"),
-	     N("Making printer port available for CUPS..."))
-	    if !$printer->{noninteractive};
-	printer::main::assure_device_is_available_for_cups($ptaldevice ||
-							   $device);
-    }
-
-    #- Read the printer driver database if necessary
-    if (keys %printer::main::thedb == 0) {
-	my $_w = $in->wait_message(
-	    N("Printerdrake"), N("Reading printer database..."))
-	    if !$printer->{noninteractive};
-        printer::main::read_printer_db($printer, $printer->{SPOOLER});
-    }
-
-    #- Search the database entry which matches the detected printer best
-    my $descr = "";
-    foreach (@autodetected) {
-	$device eq $_->{port} or next;
-	my ($automake, $automodel, $autodescr, $autocmdset, $autosku) =
-	    ($_->{val}{MANUFACTURER}, $_->{val}{MODEL},
-	     $_->{val}{DESCRIPTION}, $_->{val}{'COMMAND SET'},
-	     $_->{val}{SKU});
-	# Clean some manufacturer's names
-	my $descrmake = printer::main::clean_manufacturer_name($automake);
-	if ($automake && $autosku) {
-	    $descr = "$descrmake|$autosku";
-	} elsif ($automake && $automodel) {
-	    $descr = "$descrmake|$automodel";
-	} elsif ($autodescr) {
-	    $descr = $autodescr;
-	    $descr =~ s/ /|/;
-	} elsif ($automodel) {
-	    $descr = $automodel;
-	    $descr =~ s/ /|/;
-	} elsif ($automake) {
-	    $descr = "$descrmake|";
-	}
-	# Remove manufacturer's name from the beginning of the
-	# description (do not do this with manufacturer names which
-	# contain odd characters)
-	$descr =~ s/^$descrmake\|\s*$descrmake\s*/$descrmake|/i
-	    if $descrmake && 
-           $descrmake !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!;
-	# Clean up the description from noise which makes the best match
-	# difficult
-	$descr =~ s/\s+[Ss]eries//i;
-	$descr =~ s/\s+\(?[Pp]rinter\)?$//i;
-	$printer->{DBENTRY} = "";
-	# Try to find an exact match, check both whether the detected
-	# make|model is in the make|model of the database entry and vice versa
-	# If there is more than one matching database entry, the longest match
-	# counts.
-	my $matchlength = -100;
-	foreach my $entry (keys %printer::main::thedb) {
-	    # Try to match the device ID string of the auto-detection
-	    if ($printer::main::thedb{$entry}{make} =~ /Generic/i) {
-		# Database entry for generic printer, check printer
-		# languages (command set)
-		my $_cmd = $printer::main::thedb{$entry}{devidcmd};
-		if ($printer::main::thedb{$entry}{model} =~ 
-		    m!PCL\s*5/5e!i) {
-		    # Generic PCL 5/5e Printer
-		    if ($autocmdset =~
-			/(^|[:,])PCL\s*\-*\s*(5|)([,;]|$)/i) {
-			if ($matchlength < -50) {
-			    $matchlength = -50;
-			    $printer->{DBENTRY} = $entry;
-			    next;
-			}
-		    }
-		} elsif ($printer::main::thedb{$entry}{model} =~ 
-		    m!PCL\s*(6|XL)!i) {
-		    # Generic PCL 6/XL Printer
-		    if ($autocmdset =~
-			/(^|[:,])PCL\s*\-*\s*(6|XL)([,;]|$)/i) {
-			if ($matchlength < -40) {
-			    $matchlength = -40;
-			    $printer->{DBENTRY} = $entry;
-			    next;
-			}
-		    }
-		} elsif ($printer::main::thedb{$entry}{model} =~ 
-		    m!(PostScript)!i) {
-		    # Generic PostScript Printer
-		    if ($autocmdset =~
-			/(^|[:,])(PS|POSTSCRIPT)[^:;,]*([,;]|$)/i) {
-			if ($matchlength < -10) {
-			    $matchlength = -10;
-			    $printer->{DBENTRY} = $entry;
-			    next;
-			}
-		    }
-		}
-	    } else {
-		# "Real" manufacturer, check manufacturer, model, and/or
-		# description
-		my $matched = 1;
-		my ($mfg, $mdl, $des);
-		if ($mfg = $printer::main::thedb{$entry}{devidmake}) {
-		    $mfg =~ s/Hewlett[-\s_]Packard/HP/i;
-		    if (uc($mfg) ne uc($automake)) {
-			$matched = 0;
-		    }
-		}
-		if ($mdl = $printer::main::thedb{$entry}{devidmodel}) {
-		    if ($mdl ne $automodel) {
-			$matched = 0;
-		    }
-		}
-		if ($des = $printer::main::thedb{$entry}{deviddesc}) {
-		    $des =~ s/Hewlett[-\s_]Packard/HP/;
-		    $des =~ s/HEWLETT[-\s_]PACKARD/HP/;    
-		    if ($des ne $autodescr) {
-			$matched = 0;
-		    }
-		}
-		if ($matched && ($des || $mfg && $mdl)) {
-		    # Full match to known auto-detection data
-		    $printer->{DBENTRY} = $entry;
-		    $matchlength = 1000;
-		    last;
-		}
-	    }
-	    # Do not search human-readable make and model names if we had an
-	    # exact match or a match to the auto-detection ID string 
-	    next if $matchlength >= 100;
-	    # Try to match the (human-readable) make and model of the
-	    # Foomatic database or of thr PPD file
-	    my $dbmakemodel;
-	    if ($printer->{expert}) {
-		$dbmakemodel = $1 if $entry =~ m/^(.*)\|[^\|]*$/;
-	    } else {
-		$dbmakemodel = $entry;
-	    }
-	    # Do not try to match if the database entry does not provide
-	    # make and model
-	    next unless $dbmakemodel;
-	    # If make and model match exactly, we have found the correct
-	    # entry and we can stop searching human-readable makes and
-	    # models
-	    if (lc($dbmakemodel) eq lc($descr)) {
-		$printer->{DBENTRY} = $entry;
-		$matchlength = 100;
-		next;
-	    }
-	    # Matching a part of the human-readable makes and models
-	    # should only be done if the search term is not the name of
-	    # an old model, otherwise the newest, not yet listed models
-	    # match with the oldest model of the manufacturer (as the
-	    # Epson Stylus Photo 900 with the original Epson Stylus Photo)
-	    my @badsearchterms = 
-		("HP|DeskJet",
-		 "HP|LaserJet",
-		 "HP|DesignJet",
-		 "HP|OfficeJet",
-		 "HP|PhotoSmart",
-		 "EPSON|Stylus",
-		 "EPSON|Stylus Color",
-		 "EPSON|Stylus Photo",
-		 "EPSON|Stylus Pro",
-		 "XEROX|WorkCentre",
-		 "XEROX|DocuPrint");
-	    if (!member($descr, @badsearchterms)) {
-		my $searchterm = $descr;
-		my $lsearchterm = length($searchterm);
-		$searchterm =~ s!([\\/\(\)\[\]\|\.\$\@\%\*\?])!\\$1!g;
-		if ($lsearchterm > $matchlength &&
-		    $dbmakemodel =~ m!$searchterm!i) {
-		    $matchlength = $lsearchterm;
-		    $printer->{DBENTRY} = $entry;
-		}
-	    }
-	    if (!member($dbmakemodel, @badsearchterms)) {
-		my $searchterm = $dbmakemodel;
-		my $lsearchterm = length($searchterm);
-		$searchterm =~ s!([\\/\(\)\[\]\|\.\$\@\%\*\?])!\\$1!g;
-		if ($lsearchterm > $matchlength &&
-		    $descr =~ m!$searchterm!i) {
-		    $matchlength = $lsearchterm;
-		    $printer->{DBENTRY} = $entry;
-		}
-	    }
-	}
-	# No matching printer found, try a best match as last mean (not
-	# when generating queues non-interactively)
-	if (!$printer->{noninteractive}) {
-	    $printer->{DBENTRY} ||=
-		bestMatchSentence($descr, keys %printer::main::thedb);
-	    # If the manufacturer was not guessed correctly, discard the
-	    # guess.
-	    my $guessedmake = lc($1) if $printer->{DBENTRY} =~ /^([^\|]+)\|/;
-	    if ($guessedmake !~ /Generic/i &&
-		$descr !~ /$guessedmake/i &&
-		($guessedmake ne "hp" ||
-		 $descr !~ /Hewlett[\s-]+Packard/i))
-            { $printer->{DBENTRY} = "" };
-	}
-    }
-
-    #- Pre-fill the "Description" field with the printer's model name
-    if (!$printer->{currentqueue}{desc} && $descr) {
-	$printer->{currentqueue}{desc} = $descr;
-	$printer->{currentqueue}{desc} =~ s/\|/ /g;
-    }
-
-    #- When we have chosen a printer here, the question whether the
-    #- automatically chosen model from the database is correct, should
-    #- have "This model is correct" as default answer
-    delete($printer->{MANUALMODEL});
-
-    1;
-}
-
-sub choose_printer_name {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-    # Name, description, location
-#    $in->set_help('setupPrinterName') if $::isInstall;
-    my $default = $printer->{currentqueue}{queue};
-    $in->ask_from_(
-	 { title => N("Enter Printer Name and Comments"),
-	   #cancel => !$printer->{configured}{$queue} ? '' : N("Remove queue"),
-	   callbacks => { complete => sub {
-	       unless ($printer->{currentqueue}{queue} =~ /^[A-Za-z0-9_]+$/) {
-		   $in->ask_warn(N("Error"), N("Name of printer should contain only letters, numbers and the underscore"));
-		   return 1, 0;
-	       }
-	       local $::isWizard = 0;
-	       if ($printer->{configured}{$printer->{currentqueue}{queue}}
-		   && $printer->{currentqueue}{queue} ne $default && 
-		   !$in->ask_yesorno(N("Warning"), N("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
-						     $printer->{currentqueue}{queue}),
-				     0)) {
-		   return 1, 0; # Let the user correct the name
-	       }
-	       my $ml = 12;
-	       if ((length($printer->{currentqueue}{queue}) > $ml) && 
-		   !$in->ask_yesorno(N("Warning"), N("The printer name \"%s\" has more than 12 characters which can make the printer unaccessible from Windows clients. Do you really want to use this name?",
-						     $printer->{currentqueue}{queue}),
-				     0)) {
-		   return 1, 0; # Let the user correct the name
-	       }
-	       return 0;
-	   },
-		      },
-	   messages =>
-N("Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users.") }, 
-	 [ { label => N("Name of printer"), val => \$printer->{currentqueue}{queue} },
-	   { label => N("Description"), val => \$printer->{currentqueue}{desc} },
-	   { label => N("Location"), val => \$printer->{currentqueue}{loc} },
-	 ]) or return 0;
-
-    $printer->{QUEUE} = $printer->{currentqueue}{queue};
-    1;
-}
-
-sub get_db_entry {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-    #- Read the printer driver database if necessary
-    if (keys %printer::main::thedb == 0) {
-	my $_w = $in->wait_message(N("Printerdrake"),
-				   N("Reading printer database..."))
-	    if $printer->{noninteractive};
-	printer::main::read_printer_db($printer, $printer->{SPOOLER});
-    }
-    my $_w = $in->wait_message(N("Printerdrake"),
-			       N("Preparing printer database..."))
-	if !$printer->{noninteractive};
-    my $queue = $printer->{OLD_QUEUE};
-    if ($printer->{configured}{$queue}) {
-	# The queue was already configured
-	if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
-	    # The queue was configured with Foomatic
-	    my $driverstr;
-	    if ($printer->{configured}{$queue}{queuedata}{driver} eq "Postscript") {
-		$driverstr = "PostScript";
-	    } else {
-		$driverstr = "GhostScript + $printer->{configured}{$queue}{queuedata}{driver}";
-	    }
-	    my $make = uc($printer->{configured}{$queue}{queuedata}{make});
-	    my $model =	$printer->{configured}{$queue}{queuedata}{model};
-	    if ($printer->{expert}) {
-		$printer->{DBENTRY} = "$make|$model|$driverstr";
-		# database key contains the "(recommended)" for the
-		# recommended driver, so add it if necessary
-		unless (exists($printer::main::thedb{$printer->{DBENTRY}})) {
-		    $printer->{DBENTRY} .= " $precstr";
-		}
-	    } else {
-		$printer->{DBENTRY} = "$make|$model";
-	    }
-	    $printer->{OLD_CHOICE} = $printer->{DBENTRY};
-	} elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
-	    # Do we have a native CUPS driver or a PostScript PPD file?
-	    $printer->{DBENTRY} =
-		printer::main::get_descr_from_ppd($printer) ||
-		$printer->{DBENTRY};
-	    unless (exists($printer::main::thedb{$printer->{DBENTRY}})) {
-		$printer->{DBENTRY} .= " $precstr";
-	    }
-	    $printer->{OLD_CHOICE} = $printer->{DBENTRY};
-	}
-	my ($make, $model);
-	if ($printer->{DBENTRY} eq "") {
-	    # Point the list cursor at least to manufacturer and model of 
-	    # the printer
-	    $printer->{DBENTRY} = "";
-	    if ($printer->{configured}{$queue}{queuedata}{foomatic}) {
-		$make = uc($printer->{configured}{$queue}{queuedata}{make});
-		$model = $printer->{configured}{$queue}{queuedata}{model};
-	    } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) {
-		my $makemodel =
-		    printer::main::get_descr_from_ppd($printer);
-		if ($makemodel =~ m!^([^\|]+)\|([^\|]+)(|\|.*)$!) {
-              $make = $1;
-              $model = $2;
-          }
-	    }
-	    foreach my $key (keys %printer::main::thedb) {
-		if ($printer->{expert} &&
-		    $key =~ /^$make\|$model\|.*$sprecstr.*$/ ||
-		    !$printer->{expert} && $key =~ /^$make\|$model$/) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	}
-	if ($printer->{DBENTRY} eq "") {
-	    # Exact match of make and model did not work, try to clean
-	    # up the model name
-	    $model =~ s/PS//;
-	    $model =~ s/PostScript//i;
-	    $model =~ s/Series//i;
-	    foreach my $key (keys %printer::main::thedb) {
-		if ($printer->{expert} && $key =~ /^$make\|$model\|.*$sprecstr.*$/ ||
-		    !$printer->{expert} && $key =~ /^$make\|$model$/) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	}
-	if ($printer->{DBENTRY} eq "" && $make ne "") {
-	    # Exact match with cleaned-up model did not work, try a best match
-	    my $matchstr = "$make|$model";
-	    $printer->{DBENTRY} = 
-		bestMatchSentence($matchstr, keys %printer::main::thedb);
-	    # If the manufacturer was not guessed correctly, discard the
-	    # guess.
-	    my $guessedmake = lc($1) if $printer->{DBENTRY} =~ /^([^\|]+)\|/;
-	    if ($matchstr !~ /$guessedmake/i &&
-		($guessedmake ne "hp" ||
-		 $matchstr !~ /Hewlett[\s-]+Packard/i))
-	    { $printer->{DBENTRY} = "" };
-	}
-	if ($printer->{DBENTRY} eq "") {
-	    # Set the OLD_CHOICE to a non-existing value
-	    $printer->{OLD_CHOICE} = "XXX";
-	}
-    } else {
-	if ($printer->{expert} && $printer->{DBENTRY} !~ /$sprecstr/) {
-	    my ($make, $model) = $printer->{DBENTRY} =~ /^([^\|]+)\|([^\|]+)\|/;
-	    foreach my $key (keys %printer::main::thedb) {
-		if ($key =~ /^$make\|$model\|.*$sprecstr.*$/) {
-		    $printer->{DBENTRY} = $key;
-		}
-	    }
-	}
-	$printer->{OLD_CHOICE} = $printer->{DBENTRY};
-    }
-    1;
-}
-
-sub is_model_correct {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-#    $in->set_help('chooseModel') if $::isInstall;
-    my $dbentry = $printer->{DBENTRY};
-    if (!$dbentry) {
-	# If printerdrake could not determine the model, omit this dialog and
-	# let the user choose manually.
-	$printer->{MANUALMODEL} = 1;
-	return 1;
-    }
-    $dbentry =~ s/\|/ /g;
-    my $res = $in->ask_from_list_(
-	     N("Your printer model"),
-	     N("Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.
-
-For your printer Printerdrake has found:
-
-%s", $dbentry),
-	     [N("The model is correct"),
-	      N("Select model manually")],
-	     ($printer->{MANUALMODEL} ? N("Select model manually") : 
-	      N("The model is correct")));
-    return 0 if !$res;
-    $printer->{MANUALMODEL} = $res eq N("Select model manually");
-    1;
-}
-
-sub choose_model {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-#    $in->set_help('chooseModel') if $::isInstall;
-    #- Read the printer driver database if necessary
-    if (keys %printer::main::thedb == 0) {
-	my $_w = $in->wait_message(N("Printerdrake"),
-				  N("Reading printer database..."));
-        printer::main::read_printer_db($printer, $printer->{SPOOLER});
-    }
-    unless (exists($printer::main::thedb{$printer->{DBENTRY}})) {
-	$printer->{DBENTRY} = N("Raw printer (No driver)");
-    }
-    # Choose the printer/driver from the list
-    my $choice = $printer->{DBENTRY};
-    my $loadppdchosen = 0;
-    while (1) {
-	if ($in->ask_from_({ 
-	    title => N("Printer model selection"),
-	    messages => N("Which printer model do you have?") .
-		N("
-
-Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted.") 
-		. " " .
-		N("If your printer is not listed, choose a compatible (see printer manual) or a similar one."),
-		#cancel => (""),
-		#ok => (""),
-	    }, [ 
-		 # List the printers/drivers
-		 { val => \$choice, format => \&translate,
-		   sort => 1, separator => "|", tree_expanded => 0,
-		   quit_if_double_click => 1, allow_empty_list => 1,
-		   list => [ keys %printer::main::thedb ] },
-		 # Button to install a manufacturer-supplied PPD file
-		 { clicked_may_quit =>
-		       sub { 
-			   $loadppdchosen = 1;
-			   1; 
-		       },
-		   val => N("Install a manufacturer-supplied PPD file") },
-		 ])) {
-	    $printer->{DBENTRY} = $choice if !$loadppdchosen;
-	} else {
-	    return 0;
-	}
-	last if !$loadppdchosen;
-	# Install a manufacturer-supplied PPD file
-	my $ppdentry;
-	if ($ppdentry = installppd($printer, $in)) {
-	    $choice = $ppdentry;
-	}
-	$loadppdchosen = 0;
-    }
-    return 1;
-}
-
-sub installppd {
-    my ($printer, $in) = @_;
-
-    local $::isEmbedded = 0;
-    # Install a manufacturer-supplied PPD file
-
-    # The dialogs to choose the PPD file should appear as extra
-    # windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-    my $ppdfile;
-    my ($mediachoice);
-    while (1) {
-	# Tell user about PPD file installation
-	$in->ask_from('Printerdrake',
-		      N("Every PostScript printer is delivered with a PPD file which describes the printer's options and features.") . " " .
-		      N("This file is usually somewhere on the CD with the Windows and Mac drivers delivered with the printer.") . " " .
-		      N("You can find the PPD files also on the manufacturer's web sites.") . " " .
-		      N("If you have Windows installed on your machine, you can find the PPD file on your Windows partition, too.") . "\n" .
-		      N("Installing the printer's PPD file and using it when setting up the printer makes all options of the printer available which are provided by the printer's hardware") . "\n" .
-		      N("Here you can choose the PPD file to be installed on your machine, it will then be used for the setup of your printer."),
-		      [
-		       { label => N("Install PPD file from"), 
-			 val => \$mediachoice,
-			 list => [N("CD-ROM"),
-				  N("Floppy Disk"), 
-				  N("Other place")], 
-			 not_edit => 1, sort => 0 },
-		       ],
-		      ) or return 0;
-	my $dir;
-	if ($mediachoice eq N("CD-ROM")) {
-	    $dir = "/mnt/cdrom";
-	} elsif ($mediachoice eq N("Floppy Disk")) {
-	    $dir = "/mnt/floppy";
-	} elsif ($mediachoice eq N("Other place")) {
-	    $dir = "/mnt";
-	} else {
-	    return 0;
-	}
-	# Let user select a PPD file from a floppy, hard disk, ...
-        $ppdfile = $in->ask_file(N("Select PPD file"), $dir);
-	last if !$ppdfile;
-	if (! -r $ppdfile) {
-	    $in->ask_warn(N("Error"),
-			  N("The PPD file %s does not exist or is unreadable!",
-			    $ppdfile));
-	    next;
-	}
-	if (! printer::main::checkppd($printer, $ppdfile)) {
-	    $in->ask_warn(N("Error"),
-			  N("The PPD file %s does not conform with the PPD specifications!",
-			    $ppdfile));
-	    next;
-	}
-	last;
-    }
-
-    return 0 if !$ppdfile;
-
-    # Install the PPD file in /usr/share/cups/ppd/printerdrake/
-    my $w = $in->wait_message(N("Printerdrake"),
-			       N("Installing PPD file..."));
-    my $ppdentry = printer::main::installppd($printer, $ppdfile);
-    undef $w;
-    return $ppdentry;
-}
-
-my %lexmarkinkjet_options = (
-                             'parallel:/dev/lp0' => " -o Port=ParPort1",
-                             'parallel:/dev/lp1' => " -o Port=ParPort2",
-                             'parallel:/dev/lp2' => " -o Port=ParPort3",
-                             'usb:/dev/usb/lp0' => " -o Port=USB1",
-                             'usb:/dev/usb/lp1' => " -o Port=USB2",
-                             'usb:/dev/usb/lp2' => " -o Port=USB3",
-                             'file:/dev/lp0' => " -o Port=ParPort1",
-                             'file:/dev/lp1' => " -o Port=ParPort2",
-                             'file:/dev/lp2' => " -o Port=ParPort3",
-                             'file:/dev/usb/lp0' => " -o Port=USB1",
-                             'file:/dev/usb/lp1' => " -o Port=USB2",
-                             'file:/dev/usb/lp2' => " -o Port=USB3",
-                             );
-
-my %drv_x125_options = (
-                             'usb:/dev/usb/lp0' => " -o Device=usb_lp1",
-                             'usb:/dev/usb/lp1' => " -o Device=usb_lp2",
-                             'usb:/dev/usb/lp2' => " -o Device=usb_lp3",
-                             'usb:/dev/usb/lp3' => " -o Device=usb_lp3",
-                             'file:/dev/usb/lp0' => " -o Device=usb_lp1",
-                             'file:/dev/usb/lp1' => " -o Device=usb_lp2",
-                             'file:/dev/usb/lp2' => " -o Device=usb_lp3",
-                             'file:/dev/usb/lp3' => " -o Device=usb_lp3",
-                             );
-
-sub get_printer_info {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-    my $queue = $printer->{OLD_QUEUE};
-    my $oldchoice = $printer->{OLD_CHOICE};
-    my $newdriver = 0;
-    if (!$printer->{configured}{$queue} ||    # New queue  or
-	($oldchoice && $printer->{DBENTRY} && # make/model/driver changed
-	 ($oldchoice ne $printer->{DBENTRY} ||
-	  $printer->{currentqueue}{driver} ne 
-	   $printer::main::thedb{$printer->{DBENTRY}}{driver}))) {
-	delete($printer->{currentqueue}{printer});
-	delete($printer->{currentqueue}{ppd});
-	$printer->{currentqueue}{foomatic} = 0;
-	# Read info from printer database
-	foreach (qw(printer ppd driver make model)) { #- copy some parameter, shorter that way...
-	    $printer->{currentqueue}{$_} = $printer::main::thedb{$printer->{DBENTRY}}{$_};
-	}
-	$newdriver = 1;
-    }
-    # Use the "printer" and not the "foomatic" field to identify a Foomatic
-    # queue because in a new queue "foomatic" is not set yet.
-    if ($printer->{currentqueue}{printer} || # We have a Foomatic queue
-	$printer->{currentqueue}{ppd}) { # We have a PPD queue
-	if ($printer->{currentqueue}{printer}) { # Foomatic queue?
-	    # In case of a new queue "foomatic" was not set yet
-	    $printer->{currentqueue}{foomatic} = 1;
-	    $printer->{currentqueue}{ppd} = undef;
-	} elsif ($printer->{currentqueue}{ppd}) { # PPD queue?
-	    # If we had a Foomatic queue before, unmark the flag and
-	    # initialize the "printer" and "driver" fields
-	    $printer->{currentqueue}{foomatic} = 0;
-	    $printer->{currentqueue}{printer} = undef;
-	    $printer->{currentqueue}{driver} = "PPD";
-	}
-	# Now get the options for this printer/driver combo
-	if ($printer->{configured}{$queue} && 
-	    ($printer->{configured}{$queue}{queuedata}{foomatic} ||
-	     $printer->{configured}{$queue}{queuedata}{ppd})) {
-	    if (!$newdriver) {
-		# The user did not change the printer/driver
-		$printer->{ARGS} = $printer->{configured}{$queue}{args};
-	    } elsif ($printer->{currentqueue}{foomatic}) {
-		# The queue was already configured with Foomatic ...
-		# ... and the user has chosen another printer/driver
-		$printer->{ARGS} = 
-		    printer::main::read_foomatic_options($printer);
-	    } elsif ($printer->{currentqueue}{ppd}) {
-		# ... and the user has chosen another printer/driver
-		$printer->{ARGS} = 
-		    printer::main::read_ppd_options($printer);
-	    }
-	} else {
-	    # The queue was not configured with Foomatic before
-	    # Set some special options
-	    $printer->{SPECIAL_OPTIONS} = '';
-	    # Default page size depending on the country/language
-	    # (US/Canada -> Letter, Others -> A4)
-	    my $pagesize;
-	    if ($printer->{PAPERSIZE}) {
-		$printer->{SPECIAL_OPTIONS} .= 
-		    " -o PageSize=$printer->{PAPERSIZE}";
-	    } elsif (($pagesize = $in->{locale}{country}) ||
-		     ($pagesize = $ENV{LC_PAPER}) ||
-		     ($pagesize = $in->{locale}{lang}) ||
-		     ($pagesize = $ENV{LANG}) ||
-		     ($pagesize = $ENV{LANGUAGE}) ||
-		     ($pagesize = $ENV{LC_ALL})) {
-		if ($pagesize =~ /US/ ||
-		    $pagesize =~ /CA/) {
-		    $pagesize = "Letter";
-		} else {
-		    $pagesize = "A4";
-		}
-		$printer->{SPECIAL_OPTIONS} .= 
-		    " -o PageSize=$pagesize";
-	    }
-	    # Do not embed the following messages in the add-printer
-	    # wizard.
-	    local $::isWizard = 0;
-	    # oki4drv driver -> OKI winprinter which needs the
-	    # oki4daemon to work
-	    if ($printer->{currentqueue}{driver} eq 'oki4drv') {
-		if ($printer->{currentqueue}{connect} !~ 
-		    m!^(parallel|file):/dev/lp0$!) {
-		    $::noX || 
-			$in->ask_warn(N("OKI winprinter configuration"),
-				      N("You are configuring an OKI laser winprinter. These printers\nuse a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."));
-		}
-		$printer->{currentqueue}{connect} = 'file:/dev/null';
-		# Start the oki4daemon
-		services::start_service_on_boot('oki4daemon');
-		printer::services::start('oki4daemon');
-		# Set permissions
-		
-		my $h = {
-		    cups => sub { set_permissions('/dev/oki4drv', '660', 
-						  'lp', 'sys') },
-		    pdq  => sub { set_permissions('/dev/oki4drv', '666') }
-		};
-		my $s = $h->{$printer->{SPOOLER}} ||= 
-		    sub { set_permissions('/dev/oki4drv', '660',
-					  'lp', 'lp') };
-		&$s;
-	    } elsif ($printer->{currentqueue}{driver} eq 'lexmarkinkjet') {
-		# Set "Port" option
-		my $opt =
-		    $lexmarkinkjet_options{$printer->{currentqueue}{connect}};
-		if ($opt) {
-		    $printer->{SPECIAL_OPTIONS} .= $opt;
-		} else {
-		    $::noX || 
-			$in->ask_warn(N("Lexmark inkjet configuration"),
-				      N("The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."));
-		    return 0;
-		}
-		# Set device permissions
-		if ($printer->{currentqueue}{connect} =~ 
-		    /^\s*(file|parallel|usb):(\S*)\s*$/) {
-		    if ($printer->{SPOOLER} eq 'cups') {
-			set_permissions($2, '660', 'lp', 'sys');
-		    } elsif ($printer->{SPOOLER} eq 'pdq') {
-			set_permissions($2, '666');
-		    } else {
-			set_permissions($2, '660', 'lp', 'lp');
-		    }
-		}
-		# This is needed to have the device not blocked by the
-		# spooler backend.
-		$printer->{currentqueue}{connect} = 'file:/dev/null';
-		#install packages
-		my $drivertype = $printer->{currentqueue}{model};
-		if ($drivertype eq 'Z22') { $drivertype = 'Z32' }
-		if ($drivertype eq 'Z23') { $drivertype = 'Z33' }
-		$drivertype = lc($drivertype);
-		if (!files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
-		    eval { $::noX or $in->do_pkgs->install("lexmark-drivers-$drivertype") };
-		}
-		if (!files_exist("/usr/local/lexmark/$drivertype/$drivertype")) {
-		    # Driver installation failed, probably we do not have
-		    # the commercial CDs
-		    $::noX || 
-			$in->ask_warn(N("Lexmark inkjet configuration"),
-				      N("To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."));
-		}
-	    } elsif ($printer->{currentqueue}{driver} eq 'drv_x125') {
-		# Set "Device" option
-		my $opt =
-		    $drv_x125_options{$printer->{currentqueue}{connect}};
-		if ($opt) {
-		    $printer->{SPECIAL_OPTIONS} .= $opt;
-		} else {
-		    $::noX || 
-			$in->ask_warn(N("Lexmark X125 configuration"),
-				      N("The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes. Please connect your printer to a local USB port or configure it on the machine where it is connected to."));
-		    return 0;
-		}
-		# Set device permissions
-		if ($printer->{currentqueue}{connect} =~ 
-		    /^\s*(file|parallel|usb):(\S*)\s*$/) {
-              if ($printer->{SPOOLER} eq 'cups') {
-                  set_permissions($2, '660', 'lp', 'sys');
-              } elsif ($printer->{SPOOLER} eq 'pdq') {
-                  set_permissions($2, '666');
-              } else {
-                  set_permissions($2, '660', 'lp', 'lp');
-              }
-		}
-		# This is needed to have the device not blocked by the
-		# spooler backend.
-		$printer->{currentqueue}{connect} = 'file:/dev/null';
-	    } elsif ($printer->{currentqueue}{driver} eq 'ml85p') {
-		# Check whether printer is on first parallel port
-		if ($printer->{currentqueue}{connect} !~
-		    m!^\s*(parallel|file):/dev/(lp|printers/)0\s*$!) {
-		    $::noX || 
-			$in->ask_warn(N("Samsung ML/QL-85G configuration"),
-				      N("The driver for this printer only supports printers locally connected on the first parallel port, no printers on remote machines or print server boxes or on other parallel ports. Please connect your printer to the first parallel port or configure it on the machine where it is connected to."));
-		    return 0;
-		}
-		# Set driver executable permissions
-		if ($printer->{SPOOLER} eq 'cups') {
-		    set_permissions('/usr/bin/ml85p', 
-				    '4750', 'root', 'sys');
-		} elsif ($printer->{SPOOLER} eq 'pdq') {
-		    set_permissions('/usr/bin/ml85p', 
-				    '4755', 'root', 'sys');
-		} else {
-		    set_permissions('/usr/bin/ml85p', 
-				    '4750', 'root', 'lp');
-		}
-		# This is needed to have the device not blocked by the
-		# spooler backend.
-		$printer->{currentqueue}{connect} = 'file:/dev/null';
-	    } elsif (($printer->{currentqueue}{driver} =~
-		      m!^\s*lbp[46]60\s*$!) || 
-		     ($printer->{currentqueue}{ppd} && 
-		      ($printer->{currentqueue}{ppd} =~ 
-		       m!Canon-LBP-[46]60-lbp[46]60.ppd!))) {
-		# Check whether printer is on first parallel port
-		if ($printer->{currentqueue}{connect} !~
-		    m!^\s*(parallel|file):/dev/(lp|printers/)0\s*$!) {
-		    $::noX || 
-			$in->ask_warn(N("Canon LBP-460/660 configuration"),
-				      N("The driver for this printer only supports printers locally connected on the first parallel port, no printers on remote machines or print server boxes or on other parallel ports. Please connect your printer to the first parallel port or configure it on the machine where it is connected to."));
-		    return 0;
-		}
-		# Set driver executable permissions
-		if ($printer->{SPOOLER} eq 'cups') {
-		    set_permissions('/usr/bin/lbp660', 
-				    '4750', 'root', 'sys');
-		} elsif ($printer->{SPOOLER} eq 'pdq') {
-		    set_permissions('/usr/bin/lbp660', 
-				    '4755', 'root', 'sys');
-		} else {
-		    set_permissions('/usr/bin/lbp660', 
-				    '4750', 'root', 'lp');
-		}
-		# This is needed to have the device not blocked by the
-		# spooler backend.
-		$printer->{currentqueue}{connect} = 'file:/dev/null';
-	    } elsif ($printer->{currentqueue}{printer} eq 'HP-LaserJet_1000') {
-		$in->ask_warn(N("Firmware-Upload for HP LaserJet 1000"),
-			      $hp1000fwtext);
-	    }
-	    if ($printer->{currentqueue}{foomatic}) { # Foomatic queue?
-		$printer->{ARGS} = 
-		    printer::main::read_foomatic_options($printer);
-	    }  elsif ($printer->{currentqueue}{ppd}) { # PPD queue?
-		$printer->{ARGS} =
-		    printer::main::read_ppd_options($printer);
-	    }
-	    delete($printer->{SPECIAL_OPTIONS});
-	}
-    }
-    1;
-}
-
-sub unhexify {
-    # Replace hex notation for unprintable characters in PPD files
-    # by the actual characters ex: "<0A>" --> chr(hex("0A"))
-    # Taken from Foomatic
-    my ($input) = @_;
-    my $output = "";
-    my $hexmode = 0;
-    my $firstdigit = "";
-    for (my $i = 0; $i < length($input); $i ++) {
-	my $c = substr($input, $i, 1);
-	if ($hexmode) {
-	    if ($c eq ">") {
-		# End of hex string
-		$hexmode = 0;
-	    } elsif ($c =~ /^[0-9a-fA-F]$/) {
-		# Hexadecimal digit, two of them give a character
-		if ($firstdigit ne "") {
-		    $output .= chr(hex("$firstdigit$c"));
-		    $firstdigit = "";
-		} else {
-		    $firstdigit = $c;
-		}
-	    }
-	} else {
-	    if ($c eq "<") {
-		# Beginning of hex string
-		$hexmode = 1;
-	    } else {
-		# Normal character
-		$output .= $c;
-	    }
-	}
-    }
-    return $output;
-}
-
-sub setup_options {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-    my @simple_options = 
-	("PageSize",        # Media properties
-	 "MediaType",
-	 "Form",
-	 "InputSlot",       # Trays
-	 "Tray",
-	 "OutBin",
-	 "OutputBin",
-	 "FaceUp",
-	 "FaceDown",
-	 "Collate",
-	 "Manual",
-	 "ManualFeed",
-	 "Manualfeed",
-	 "ManualFeeder",
-	 "Feeder",
-	 "Duplex",          # Double-sided printing
-	 "Binding",
-	 "Tumble",
-	 "DoubleSided",
-	 "Resolution",      # Resolution/Quality
-	 "GSResolution",
-	 "HWResolution",
-	 "JCLResolution",
-	 "Quality",
-	 "PrintQuality",
-	 "PrintoutQuality",
-	 "QualityType",
-	 "ImageType",
-	 "stpImageType",
-	 "EconoMode",
-	 "JCLEconoMode",
-	 "FastRes",
-	 "JCLFastRes",
-	 "InkType",         # Colour/Gray/BW, 4-ink/6-ink
-	 "stpInkType",
-	 "Mode",
-	 "OutputMode",
-	 "OutputType",
-	 "ColorMode",
-	 "ColorModel",
-	 "PrintingMode",
-	 "Monochrome",
-	 "BlackOnly",
-	 "Grayscale",
-	 "GrayScale",
-	 "Colour",
-	 "Color",
-	 "Gamma",           # Lighter/Darker
-	 "GammaCorrection",
-	 "GammaGeneral",
-	 "MasterGamma",
-	 "StpGamma",
-	 "stpGamma",
-	 "EconoMode",       # Ink/Toner saving
-	 "Economode",
-	 "TonerSaving",
-	 "JCLEconomode",
-	 "HPNup",           # Other useful options
-	 "InstalledMemory", # Laser printer hardware config
-	 "Option1",
-	 "Option2",
-	 "Option3",
-	 "Option4",
-	 "Option5",
-	 "Option6",
-	 "Option7",
-	 "Option8",
-	 "Option9",
-	 "Option10",
-	 "Option11",
-	 "Option12",
-	 "Option13",
-	 "Option14",
-	 "Option15",
-	 "Option16",
-	 "Option17",
-	 "Option18",
-	 "Option19",
-	 "Option20",
-	 "Option21",
-	 "Option22",
-	 "Option23",
-	 "Option24",
-	 "Option25",
-	 "Option26",
-	 "Option27",
-	 "Option28",
-	 "Option29",
-	 "Option30"
-	 );
-#    $in->set_help('setupOptions') if $::isInstall;
-    if ($printer->{currentqueue}{printer} || # We have a Foomatic queue
-	$printer->{currentqueue}{ppd}) { # We have a CUPS+PPD queue
-	# Set up the widgets for the option dialog
-	my $helptext = N("Printer default settings
-
-You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower.");
-	my @widgets;
-	my @userinputs;
-	my @choicelists;
-	my @shortchoicelists;
-	my $i;
-	my @oldgroup = ("", "");
-	for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-	    # Do not show hidden options (member options of a forced
-	    # composite option)
-	    next if $printer->{ARGS}[$i]{hidden};
-	    my $optshortdefault = $printer->{ARGS}[$i]{default};
-	    # Should the option only show when the "Advanced" button was
-	    # clicked?
-	    my $advanced = ((defined($printer->{ARGS}[$i]{group}) &&
-			     $printer->{ARGS}[$i]{group} !~
-			      /^(|General|.*install.*)$/i) ||
-			    (!($printer->{ARGS}[$i]{group}) &&
-			     !member($printer->{ARGS}[$i]{name},
-				     @simple_options)) ? 1 : 0);
-	    # Group header
-	    if ($printer->{ARGS}[$i]{group} ne $oldgroup[$advanced]) {
-		my $_level = $#{$printer->{ARGS}[$i]{grouptrans}};
-		$oldgroup[$advanced] = $printer->{ARGS}[$i]{group};
-		if ($printer->{ARGS}[$i]{group}) {
-		    push(@widgets,
-			 { val => unhexify(join(" / ", 
-				     @{$printer->{ARGS}[$i]{grouptrans}})),
-			   advanced => $advanced });
-		}
-	    }
-	    if ($printer->{ARGS}[$i]{type} eq 'enum') {
-		# enumerated option
-		$choicelists[$i] = [];
-		$shortchoicelists[$i] = [];
-		foreach my $choice (@{$printer->{ARGS}[$i]{vals}}) {
-		    push(@{$choicelists[$i]}, unhexify($choice->{comment}));
-		    push(@{$shortchoicelists[$i]}, $choice->{value});
-		    if ($choice->{value} eq $optshortdefault) {
-			$userinputs[$i] = unhexify($choice->{comment});
-		    }
-		}
-		push(@widgets,
-		     { label => unhexify($printer->{ARGS}[$i]{comment}), 
-		       val => \$userinputs[$i], 
-		       not_edit => 1,
-		       list => \@{$choicelists[$i]},
-		       sort => 0,
-		       advanced => $advanced,
-		       help => $helptext })
-		    if $printer->{ARGS}[$i]{name} ne 'PageRegion';
-	    } elsif ($printer->{ARGS}[$i]{type} eq 'bool') {
-		# boolean option
-		$choicelists[$i] =
-		    [(unhexify($printer->{ARGS}[$i]{comment_true}) ||
-		      unhexify($printer->{ARGS}[$i]{name}) || "Yes"),
-		     (unhexify($printer->{ARGS}[$i]{comment_false}) ||
-		      unhexify($printer->{ARGS}[$i]{name_false}) || "No")];
-		$shortchoicelists[$i] = [];
-		my $numdefault = 
-		    ($optshortdefault =~ m!^\s*(true|on|yes|1)\s*$!i ? 
-		     "1" : "0");
-		$userinputs[$i] = $choicelists[$i][1-$numdefault];
-		push(@widgets,
-		     { label => unhexify($printer->{ARGS}[$i]{comment}),
-		       val => \$userinputs[$i],
-		       not_edit => 1,
-		       list => \@{$choicelists[$i]},
-		       sort => 0,
-		       advanced => $advanced,
-		       help => $helptext });
-	    } else {
-		# numerical option
-		$choicelists[$i] = [];
-		$shortchoicelists[$i] = [];
-		$userinputs[$i] = $optshortdefault;
-		push(@widgets,
-		     { label => unhexify($printer->{ARGS}[$i]{comment}) . 
-			   " ($printer->{ARGS}[$i]{min}... " .
-			       "$printer->{ARGS}[$i]{max})",
-			   #type => 'range',
-			   #min => $printer->{ARGS}[$i]{min},
-			   #max => $printer->{ARGS}[$i]{max},
-			   val => \$userinputs[$i],
-			   advanced => $advanced,
-			   help => $helptext });
-	    }
-	}
-	# Show the options dialog. The call-back function does a
-	# range check of the numerical options.
-	my $windowtitle = "$printer->{currentqueue}{make} $printer->{currentqueue}{model}";
-	if ($printer->{expert}) {
-	    my $driver;
-	    if ($driver = $printer->{currentqueue}{driver}) {
-		if ($printer->{currentqueue}{foomatic}) {
-		    if ($driver eq 'Postscript') {
-			$driver = "PostScript";
-		    } else {
-			$driver = "GhostScript + $driver";
-		    }
-		} elsif ($printer->{currentqueue}{ppd}) {
-		    if ($printer->{DBENTRY}) {
-			$driver = $1 if $printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/;
-		    } else {
-			$driver = printer::main::get_descr_from_ppd($printer);
-			if ($driver =~ /^[^\|]*\|[^\|]*$/) { # No driver info
-			    $driver = "PPD";
-			} else {
-			    $driver = $1 if $driver =~ /^[^\|]*\|[^\|]*\|(.*)$/;
-			}
-		    }
-		}
-	    } 
-	    if ($driver) {
-		$windowtitle .= ", $driver";
-	    }
-	}
-	# Do not show the options setup dialog when installing a new printer
-	# in recommended mode without "Manual configuration" turned on.
-	if ((!$printer->{NEW} || $printer->{expert} || $printer->{MANUAL}) &&
-	    !$printer->{noninteractive}) {
-	    return 0 if !$in->ask_from(
-		 $windowtitle,
-		 N("Printer default settings"),
-		 \@widgets,
-		 complete => sub {
-		     my $i;
-		     for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-			 if ($printer->{ARGS}[$i]{type} eq 'int' || $printer->{ARGS}[$i]{type} eq 'float') {
-			     if ($printer->{ARGS}[$i]{type} eq 'int' && $userinputs[$i] !~ /^[\-\+]?[0-9]+$/) {
-				 $in->ask_warn(N("Error"), N("Option %s must be an integer number!", unhexify($printer->{ARGS}[$i]{comment})));
-				 return 1, $i;
-			     }
-			     if ($printer->{ARGS}[$i]{type} eq 'float' && $userinputs[$i] !~ /^[\-\+]?[0-9\.]+$/) {
-				 $in->ask_warn(N("Error"), N("Option %s must be a number!", unhexify($printer->{ARGS}[$i]{comment})));
-				 return 1, $i;
-			     }
-			     if ($userinputs[$i] < $printer->{ARGS}[$i]{min} || $userinputs[$i] > $printer->{ARGS}[$i]{max}) {
-				 $in->ask_warn(N("Error"), N("Option %s out of range!", unhexify($printer->{ARGS}[$i]{comment})));
-				 return 1, $i;
-			     }
-			 }
-		     }
-		     return 0;
-		 });
-	}
-	# Read out the user's choices and generate the appropriate command
-	# line arguments
-	@{$printer->{currentqueue}{options}} = ();
-	for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) {
-	    # We did not show hidden options, so we do not have user input 
-	    # to add to the option list
-	    next if $printer->{ARGS}[$i]{hidden};
-	    push(@{$printer->{currentqueue}{options}}, "-o");
-	    if ($printer->{ARGS}[$i]{type} eq 'enum') {
-		# enumerated option
-		my $j;
-		for ($j = 0; $j <= $#{$choicelists[$i]}; $j++) {
-		    if ($choicelists[$i][$j] eq $userinputs[$i]) {
-			$printer->{ARGS}[$i]{default} =
-			    $shortchoicelists[$i][$j];
-			push(@{$printer->{currentqueue}{options}},
-			     $printer->{ARGS}[$i]{name} . "=" .
-			     $shortchoicelists[$i][$j]);
-		    }
-		}
-	    } elsif ($printer->{ARGS}[$i]{type} eq 'bool') {
-		# boolean option
-		my $v = 
-		    ($choicelists[$i][0] eq $userinputs[$i] ? "1" : "0");
-		$printer->{ARGS}[$i]{default} = $v;
-		push(@{$printer->{currentqueue}{options}},
-		     $printer->{ARGS}[$i]{name} . "=" . $v);
-	    } else {
-		# numerical option
-		$printer->{ARGS}[$i]{default} = $userinputs[$i];
-		push(@{$printer->{currentqueue}{options}},
-		     $printer->{ARGS}[$i]{name} . "=" . $userinputs[$i]);
-	    }
-	}
-    }
-    1;
-}
-
-sub setasdefault {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-#    $in->set_help('setupAsDefault') if $::isInstall;
-    if ($printer->{DEFAULT} eq '' || # We have no default printer,
-	                             # so set the current one as default
-	$in->ask_yesorno(N("Printerdrake"), N("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 0)) { # Ask the user
-	$printer->{DEFAULT} = $printer->{QUEUE};
-        printer::default::set_printer($printer);
-    }
-}
-	
-sub print_testpages {
-    my ($printer, $in, $upNetwork) = @_;
-    local $::isEmbedded = 0;
-#    $in->set_help('printTestPages') if $::isInstall;
-    # print test pages
-    my $res2 = 0;
-    my %options = (alta4 => 0, altletter => 0, ascii => 0, photo => 0, standard => 1);
-    my %old_options = (alta4 => 0, altletter => 0, ascii => 0, photo => 0, standard => 1);
-    my $oldres2 = 0;
-    my $res1 = $in->ask_from_(
-	 { title => N("Test pages"),
-	   messages => N("Please select the test pages you want to print.
-Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."),
-	   cancel => (!$printer->{NEW} ?
-		       N("Cancel") : ($::isWizard ? N("Previous") : 
-				      N("No test pages"))),
-	   ok => ($::isWizard ? N("Next") : N("Print")),
-	   callbacks => {
-	       changed => sub {
-		   if ($oldres2 ne $res2) {
-		       if ($res2) {
-				 foreach my $opt (keys %options) {
-					$options{$opt} = 0;
-					$old_options{$opt} = 0;
-				 }
-		       }
-		       $oldres2 = $res2;
-		   }
-		   foreach my $opt (keys %options) {
-			  if ($old_options{$opt} ne $options{$opt}) {
-				 if ($options{$opt}) {
-					$res2 = 0;
-					$oldres2 = 0;
-				 }
-				 $old_options{$opt} = $options{$opt};
-			  }
-		   }
-		   return 0;
-	       }
-	   } },
-	 [
-	  { text => N("Standard test page"), type => 'bool',
-	    val => \$options{standard} },
-	  if_($printer->{expert},
-	   { text => N("Alternative test page (Letter)"), type => 'bool', 
-	     val => \$options{altletter} }),
-	  if_($printer->{expert},
-	   { text => N("Alternative test page (A4)"), type => 'bool', 
-	     val => \$options{alta4} }), 
-	  { text => N("Photo test page"), type => 'bool', val => \$options{photo} },
-	  #{ text => N("Plain text test page"), type => 'bool',
-	  #  val => \$options{ascii} }
-	  if_($::isWizard,
-	   { text => N("Do not print any test page"), type => 'bool', 
-	     val => \$res2 })
-	  ]);
-    $res2 = 1 if !($options{standard} || $options{altletter} || $options{alta4} || $options{photo} || $options{ascii});
-    if ($res1 && !$res2) {
-	my @lpq_output;
-	{
-	    my $_w = $in->wait_message(N("Printerdrake"),
-				      N("Printing test page(s)..."));
-	    
-	    $upNetwork and do { &$upNetwork(); undef $upNetwork; sleep(1) };
-	    my $stdtestpage = "/usr/share/printer-testpages/testprint.ps";
-	    my $altlttestpage = "/usr/share/printer-testpages/testpage.ps";
-	    my $alta4testpage = "/usr/share/printer-testpages/testpage-a4.ps";
-	    my $phototestpage = "/usr/share/printer-testpages/photo-testpage.jpg";
-	    my $asciitestpage = "/usr/share/printer-testpages/testpage.asc";
-	    my @testpages;
-	    # Install the filter to convert the photo test page to PS
-	    if ($printer->{SPOOLER} ne "cups" && $options{photo} && !$::testing &&
-		!files_exist('/usr/bin/convert')) {
-		$in->do_pkgs->install('ImageMagick')
-		    or do {
-			# Do not embed this message in the add-printer
-			# wizard.
-			local $::isWizard = 0;
-			$in->ask_warn(N("Warning"),
-				      N("Could not install the %s package!",
-					"ImageMagick") . " " .
-				      N("Skipping photo test page."));
-			$options{photo} = 0;
-		    };
-	    }
-	    # set up list of pages to print
-	    $options{standard} and push @testpages, $stdtestpage;
-	    $options{altletter} and push @testpages, $altlttestpage;
-	    $options{alta4} and push @testpages, $alta4testpage;
-	    $options{photo} and push @testpages, $phototestpage;
-	    $options{ascii} and push @testpages, $asciitestpage;
-	    # Nothing to print
-	    return 1 if $#testpages < 0;
-	    # print the stuff
-	    @lpq_output = printer::main::print_pages($printer, @testpages);
-	}
-	my $dialogtext;
-	if (@lpq_output) {
-	    $dialogtext = N("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.
-Printing status:\n%s\n\n", @lpq_output);
-	} else {
-	    $dialogtext = N("Test page(s) have been sent to the printer.
-It may take some time before the printer starts.\n");
-	}
-	if ($printer->{NEW} == 0) {
-	    # Do not embed the following messages in the add-printer
-	    # wizard.
-	    local $::isWizard = 0;
-	    $in->ask_warn(N("Printerdrake"),$dialogtext);
-	    return 1;
-	} else {
-	    $in->ask_yesorno(N("Printerdrake"), $dialogtext . N("Did it work properly?"), 1) 
-		and return 1;
-	}
-    } else {
-	return($::isWizard ? $res1 : 1);
-    }
-    return 2;
-}
-
-sub printer_help {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-    my $spooler = $printer->{SPOOLER};
-    $spooler = "cups" if $spooler eq "rcups";
-    my $queue = $printer->{QUEUE};
-    my $default = $printer->{DEFAULT};
-    my $raw = 0;
-    my $cupsremote = 0;
-    my $hplip = "";
-    my $scanning = "";
-    my $photocard = "";
-    my $hp11000fw = "";
-    if ($printer->{configured}{$queue}) {
-	if ($printer->{configured}{$queue}{queuedata}{model} eq "Unknown model" ||
-	    $printer->{configured}{$queue}{queuedata}{model} eq N("Raw printer")) {
-	    $raw = 1;
-	}
-	# Information about extra functions of HP printers enabled by HPLIP
-	$hplip = hplip_help(
-	     $printer->{configured}{$queue}{queuedata}{make} . " " .
-	     $printer->{configured}{$queue}{queuedata}{model}, 
-	     $printer->{configured}{$queue}{queuedata}{connect});
-	if ($hplip) {
-	    $hplip = "\n\n$hplip\n\n";
-	}
-	# Information about scanning with HP's multi-function devices
-	$scanning = scanner_help(
-	     $printer->{configured}{$queue}{queuedata}{make} . " " .
-	     $printer->{configured}{$queue}{queuedata}{model}, 
-	     $printer->{configured}{$queue}{queuedata}{connect});
-	if ($scanning) {
-	    $scanning = "\n\n$scanning\n\n";
-	}
-	# Information about photo card access with HP's multi-function devices
-	$photocard = photocard_help(
-	     $printer->{configured}{$queue}{queuedata}{make} . " " .
-	     $printer->{configured}{$queue}{queuedata}{model}, 
-	     $printer->{configured}{$queue}{queuedata}{connect});
-	if ($photocard) {
-	    $photocard = "\n\n$photocard\n\n";
-	}
-	if ($printer->{configured}{$queue}{queuedata}{printer} eq
-	    'HP-LaserJet_1000') {
-	    $hp11000fw = "\n\n$hp1000fwtext\n";
-	}
-    } else {
-	$cupsremote = 1;
-    }
-
-    my $dialogtext;
-    if ($spooler eq "cups") {
-	$dialogtext =
-N("To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-N("These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-N("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-(!$cupsremote ?
- N("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s
-
-", $hplip, $scanning . $photocard, $hp11000fw) . printer::main::help_output($printer, 'cups') : 
- $hplip . $scanning . $photocard . $hp11000fw .
- N("Here is a list of the available printing options for the current printer:
-
-") . printer::main::help_output($printer, 'cups')) : $hplip . $scanning . $photocard . $hp11000fw);
-    } elsif ($spooler eq "lprng") {
-	$dialogtext =
-N("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) . 
-N("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-N("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -Z option=setting -Z switch" : "lpr -Z option=setting -Z switch")) .
-N("To get a list of the options available for the current printer click on the \"Print option list\" button.") . $hplip . $scanning . $photocard . $hp11000fw : $hplip . $scanning . $photocard . $hp11000fw);
-    } elsif ($spooler eq "lpd") {
-	$dialogtext =
-N("To print a file from the command line (terminal window) use the command \"%s <file>\".
-", ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-N("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-(!$raw ?
-N("
-The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) .
-N("To get a list of the options available for the current printer click on the \"Print option list\" button.") . $hplip . $scanning . $photocard . $hp11000fw : $hplip . $scanning . $photocard . $hp11000fw);
-    } elsif ($spooler eq "pdq") {
-	$dialogtext =
-N("To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".
-", ($queue ne $default ? "pdq -P $queue" : "pdq"), ($queue ne $default ? "lpr -P $queue" : "lpr")) .
-N("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.
-") .
-N("You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.
-If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.
-") .
-(!$raw ?
-N("
-The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".
-", "pdq", "lpr", ($queue ne $default ? "pdq -P $queue -aoption=setting -oswitch" : "pdq -aoption=setting -oswitch")) .
-N("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s
-
-", $hplip, $scanning . $photocard, $hp11000fw) . printer::main::help_output($printer, 'pdq') :
- $hplip . $scanning . $photocard . $hp11000fw);
-    }
-    my $windowtitle = ($scanning ?
-                       ($photocard ?
-			N("Printing/Scanning/Photo Cards on \"%s\"", $queue) :
-			N("Printing/Scanning on \"%s\"", $queue)) :
-                       ($photocard ?
-			N("Printing/Photo Card Access on \"%s\"", $queue) :
-			($hplip ?
-			 N("Using/Maintaining the printer \"%s\"", $queue) :
-			 N("Printing on the printer \"%s\"", $queue))));
-    if (!$raw && !$cupsremote) {
-        my $choice;
-        while ($choice ne N("Close")) {
-	    $choice = $in->ask_from_list_(
-	         $windowtitle, $dialogtext,
-		 [ N("Print option list"), N("Close") ],
-		 N("Close"));
-	    if ($choice ne N("Close")) {
-		my $_w = $in->wait_message(N("Printerdrake"),
-					  N("Printing test page(s)..."));
-	        printer::main::print_optionlist($printer);
-	    }
-	}
-    } else {
-	$in->ask_warn($windowtitle, $dialogtext);
-    }
-}
-
-sub hplip_help {
-    my ($makemodel, $deviceuri, $hplipentry) = @_;
-    return "" if (!$hplipentry && $deviceuri !~ m!^hp:/!);
-    if (!$hplipentry) {
-	$hplipentry =
-	    printer::main::hplip_device_entry_from_uri($deviceuri);
-	return "" if !$hplipentry;
-    }
-
-    my $text = N("Your %s is set up with HP's HPLIP driver software. This way many special features of your printer are supported.\n\n", $makemodel);
-    
-    if ($hplipentry->{scan}) {
-	$text .= N("The scanner in your printer can be used with the usual SANE software, for example Kooka or XSane (Both in the Multimedia/Graphics menu). ");
-	$text .= N("Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to share your scanner on the network.\n\n");
-    }
-
-    if (($hplipentry->{card} == 2) && ($deviceuri =~ m!/usb/!i)) {
-	$text .= N("The memory card readers in your printer can be accessed like a usual USB mass storage device. ");
-	$text .= N("After inserting a card a hard disk icon to access the card should appear on your desktop.\n\n");
-    } elsif ($hplipentry->{card} > 0) {
-	$text .= N("The memory card readers in your printer can be accessed using HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access Photo Cards...\" button on the \"Functions\" tab. ");
-	$text .= N("Note that this is very slow, reading the pictures from the camera or a USB card reader is usually faster.\n\n");
-    }
-
-    $text .= N("HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a lot of status monitoring and maintenance functions for your %s:\n\n", $makemodel);
-    $text .= N(" - Ink level/status info\n") if $hplipentry->{status};
-    $text .= N(" - Ink nozzle cleaning\n") if $hplipentry->{clean};
-    $text .= N(" - Print head alignment\n") if $hplipentry->{align};
-    $text .= N(" - Color calibration\n") if $hplipentry->{colorcal};
-
-    $text .= "\n";
-
-    return $text;
-}
-
-sub scanner_help {
-    my ($makemodel, $deviceuri) = @_;
-    if ($deviceuri =~ m!^ptal://?(.*?)$!) {
-	my $ptaldevice = $1;
-	if ($makemodel !~ /HP\s+PhotoSmart/i &&
-	    $makemodel !~ /HP\s+LaserJet\s+2200/i &&
-	    $makemodel !~ /HP\s+(DeskJet|dj)\s*450/i) {
-	    # Models with built-in scanner
-	    return N("Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.
-
-You do not need to run \"scannerdrake\" for setting up scanning on this device, you only need to use \"scannerdrake\" if you want to share the scanner on the network.",
-		     $ptaldevice);
-	} else {
-	    # Scanner-less models
-	    return "";
-	}
-    }
-}
-
-sub photocard_help {
-    my ($makemodel, $deviceuri) = @_;
-    if ($deviceuri =~ m!^ptal://?(.*?)$!) {
-	my $ptaldevice = $1;
-	if (($makemodel =~ /HP\s+PhotoSmart/i ||
-	     $makemodel =~ /HP\s+PSC\s*9[05]0/i ||
-	     $makemodel =~ /HP\s+PSC\s*13[15]\d/i ||
-	     $makemodel =~ /HP\s+PSC\s*161\d/i ||
-	     $makemodel =~ /HP\s+PSC\s*2\d\d\d/i ||
-	     $makemodel =~ /HP\s+OfficeJet\s+D\s*1[45]5/i ||
-	     $makemodel =~ /HP\s+OfficeJet\s+71[34]0/i ||
-	     $makemodel =~ /HP\s+OfficeJet\s+91\d\d/i ||
-	     $makemodel =~ /HP\s+(DeskJet|dj)\s*450/i) &&
-	    $makemodel !~ /HP\s+PhotoSmart\s+7150/i) {
-	    # Models with built-in photo card drives
-	    return N("Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists.",
-		     $ptaldevice);
-	} else {
-	    # Photo-card-drive-less models
-	    return "";
-	}
-    }
-}
-
-sub copy_queues_from {
-    my ($printer, $in, $oldspooler) = @_;
-
-    local $::isEmbedded = 0;
-#    $in->set_help('copyQueues') if $::isInstall;
-    my $newspooler = $printer->{SPOOLER};
-    my @oldqueues;
-    my @queueentries;
-    my @queuesselected;
-    my $newspoolerstr;
-    my $oldspoolerstr;
-    my $noninteractive = 0;
-    {
-	my $_w = $in->wait_message(N("Printerdrake"),
-				  N("Reading printer data..."));
-	@oldqueues = printer::main::get_copiable_queues($oldspooler, $newspooler);
-	@oldqueues = sort(@oldqueues);
-	$newspoolerstr = $printer::data::spoolers{$newspooler}{short_name};
-	$oldspoolerstr = $printer::data::spoolers{$oldspooler}{short_name};
-	foreach (@oldqueues) {
-	    push @queuesselected, 1;
-	    push @queueentries, { text => $_, type => 'bool', 
-				   val => \$queuesselected[-1] };
-	}
-	# LPRng and LPD use the same config files, therefore one sees the 
-	# queues of LPD when one uses LPRng and vice versa, but these queues
-	# do not work. So automatically transfer all queues when switching
-	# between LPD and LPRng.
-	if ($oldspooler =~ /^lp/ && $newspooler =~ /^lp/) {
-	    $noninteractive = 1;
-	}
-    }
-    if ($noninteractive ||
-	$in->ask_from_(
-	 { title => N("Transfer printer configuration"),
-	   messages => N("You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.
-Not all queues can be transferred due to the following reasons:
-", $oldspoolerstr, $newspoolerstr) .
-($newspooler eq "cups" ? N("CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.
-") :
- ($newspooler eq "pdq" ? N("PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.
-") :
-  N("LPD and LPRng do not support IPP printers.
-"))) .
-N("In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred.") .
-if_($oldspooler eq "cups", N("
-Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.")) . N("
-Mark the printers which you want to transfer and click 
-\"Transfer\"."),
-	   cancel => N("Do not transfer printers"),
-           ok => N("Transfer")
-	 },
-         \@queueentries
-      )) {
-	my $queuecopied = 0;
-	foreach (@oldqueues) {
-	    if (shift(@queuesselected)) {
-                my $oldqueue = $_;
-                my $newqueue = $_;
-                if (!$printer->{configured}{$newqueue} || $noninteractive ||
-		    $in->ask_from_(
-	              { title => N("Transfer printer configuration"),
-	                messages => N("A printer named \"%s\" already exists under %s. 
-Click \"Transfer\" to overwrite it.
-You can also type a new name or skip this printer.", 
-				      $newqueue, $newspoolerstr),
-                        ok => N("Transfer"),
-                        cancel => N("Skip"),
-		        callbacks => { complete => sub {
-	                    unless ($newqueue =~ /^\w+$/) {
-				$in->ask_warn(N("Error"), N("Name of printer should contain only letters, numbers and the underscore"));
-				return 1, 0;
-			    }
-			    if ($printer->{configured}{$newqueue}
-				&& $newqueue ne $oldqueue && 
-				!$in->ask_yesorno(N("Warning"), N("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?",
-							 $newqueue),
-						   0)) {
-				return 1, 0; # Let the user correct the name
-			    }
-			    return 0;
-			} }
-		    },
-		      [{label => N("New printer name"),val => \$newqueue }])) {
-		    {
-			my $_w = $in->wait_message(N("Printerdrake"), 
-			   N("Transferring %s...", $oldqueue));
-		        printer::main::copy_foomatic_queue($printer, $oldqueue,
-						   $oldspooler, $newqueue) and
-							 $queuecopied = 1;
-		    }
-		    if ($oldqueue eq $printer->{DEFAULT}) {
-			# Make the former default printer the new default
-			# printer if the user does not reject
-			if ($noninteractive ||
-			    $in->ask_yesorno(
-			      N("Transfer printer configuration"),
-			      N("You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?", $oldqueue, $newspoolerstr), 1)) {
-			    $printer->{DEFAULT} = $newqueue;
-			    printer::default::set_printer($printer);
-			}
-		    }
-		}
-            }
-	}
-        if ($queuecopied) {
-	    my $_w = $in->wait_message(N("Printerdrake"),
-                                      N("Refreshing printer data..."));
-	    printer::main::read_configured_queues($printer);
-        }
-    }
-}
-
-sub start_network {
-    my ($in, $upNetwork) = @_;
-    local $::isEmbedded = 0;
-    my $_w = $in->wait_message(N("Printerdrake"), 
-			      N("Starting network..."));
-    if ($::isInstall) {
-	my $ret;
-	if ($upNetwork) {
-            $ret = &$upNetwork();
-            undef $upNetwork;
-            sleep(1);
-        }
-        return $ret;
-    } else { return printer::services::start("network") }
-}
-
-sub network_configured() {
-    # Do configured networks (/etc/sysconfig/network-scripts/ifcfg*) exist?
-    my @netscripts =
-	cat_("ls -1 $::prefix/etc/sysconfig/network-scripts/ |");
-    my $netconfigured = 0;
-    (/ifcfg-/ and !/(ifcfg-lo|:|rpmsave|rpmorig|rpmnew)/ and
-      !/(~|\.bak)$/ and $netconfigured = 1) foreach @netscripts;
-    return $netconfigured;
-}
-
-sub check_network {
-
-    # This routine is called whenever the user tries to configure a remote
-    # printer. It checks the state of the network functionality to assure
-    # that the network is up and running so that the remote printer is
-    # reachable.
-
-    my ($printer, $in, $upNetwork, $b_dontconfigure) = @_;
-
-    local $::isEmbedded = 0;
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-#    $in->set_help('checkNetwork') if $::isInstall;
-
-    # First check: Do configured networks
-    # (/etc/sysconfig/network-scripts/ifcfg*) exist?
-
-    if (!$b_dontconfigure && !network_configured()) {
-	my $go_on = 0;
-	while (!$go_on) {
-	    my $choice = N("Configure the network now");
-	    if ($in->ask_from(N("Network functionality not configured"),
-			      N("You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"),
-			      [ { val => \$choice, type => 'list',
-				  list => [ N("Configure the network now"),
-					    N("Go on without configuring the network") ] } ])) {
-		if ($choice eq N("Configure the network now")) {
-		    if ($::isInstall) {
-			my $o = $in;
-			require network::netconnect;
-		        network::netconnect::main(
-			     $o->{netcnx} ||= {}, 
-			     $in, $o->{modules_conf}, $o->{netc}, $o->{mouse}, 
-			     $o->{intf});
-#    my ($prefix, $netcnx, $in, $o_netc, $o_mouse, $o_intf, $o_first_time, $o_noauto) = @_;
-		    } else {
-			system("/usr/sbin/drakconnect");
-		    }
-		    $go_on = network_configured();
-		} else {
-		    return 1;
-		}
-	    } else {
-		return 0;
-	    }
-	}
-    }
-
-    # Do not try to start the network if it is not configured
-    if (!network_configured()) { return 0 }
-
-    # Second check: Is the network running?
-
-    if (printer::detect::network_running()) { return 1 }
-
-    # The network is configured now, start it.
-    if (!start_network($in, $upNetwork) && 
-	(!$b_dontconfigure || $::isInstall)) {
-	$in->ask_warn(N("Warning"), 
-($::isInstall ?
-N("The network configuration done during the installation cannot be started now. Please check whether the network is accessible after booting your system and correct the configuration using the %s Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the %s Control Center, section \"Hardware\"/\"Printer\"", $shortdistroname, $shortdistroname) :
-N("The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again.")));
-	return 0;
-    }
-
-    # Give a SIGHUP to the daemon and in case of CUPS do also the
-    # automatic configuration of broadcasting/access permissions
-    # The daemon is not really restarted but only SIGHUPped to not
-    # interrupt print jobs.
-
-    my $_w = $in->wait_message(N("Printerdrake"), 
-                               N("Restarting printing system..."));
-
-    return printer::main::SIGHUP_daemon($printer->{SPOOLER});
-
-}
-
-sub security_check {
-    # Check the security mode and when in "high" or "paranoid" mode ask the
-    # user whether he really wants to configure printing.
-    my ($spooler, $security, $o_in) = @_;
-
-    local $::isEmbedded = 0;
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-#    $in->set_help('securityCheck') if $::isInstall;
-
-    # Exit silently if the spooler is PDQ
-    if ($spooler eq "pdq") { return 1 }
-
-    # Exit silently in medium or lower security levels
-    if (!$security || $security < 4) { return 1 }
-    
-    # Exit silently if the current spooler is already activated for the current
-    # security level
-    if (printer::main::spooler_in_security_level($spooler, $security)) { return 1 }
-
-    # Tell user in which security mode he is and ask him whether he really
-    # wants to activate the spooler in the given security mode. Stop the
-    # operation of installing the spooler if he disagrees.
-    my $securitystr = ($security == 4 ? N("high") : N("paranoid"));
-    if ($o_in &&
-	$o_in->ask_yesorno(N("Installing a printing system in the %s security level", $securitystr),
-			 N("You are about to install the printing system %s on a system running in the %s security level.
-
-This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessible by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.
-
-Do you really want to configure printing on this machine?",
-			   $printer::data::spoolers{$spooler}{short_name},
-			   $securitystr))) {
-        printer::main::add_spooler_to_security_level($spooler, $security);
-	my $service;
-	if ($spooler eq "lpr" || $spooler eq "lprng") {
-	    $service = "lpd";
-	} else {
-	    $service = $spooler;
-	}
-        services::start_service_on_boot($service); #TV
-	return 1;
-    } else {
-	return 0;
-    }
-}
-
-sub start_spooler_on_boot {
-    # Checks whether the spooler will be started at boot time and if not,
-    # ask the user whether he wants to start the spooler at boot time.
-    my ($printer, $o_in, $b_service, $b_silentspooleronboot) = @_;
-    # PDQ has no daemon, so nothing needs to be started :
-    return unless $b_service;
-
-    local $::isEmbedded = 0;
-    # Any additional dialogs caused by this subroutine should appear as
-    # extra windows and not embedded in the "Add printer" wizard.
-    local $::isWizard = 0;
-
-#    $in->set_help('startSpoolerOnBoot') if $::isInstall;
-    if (!services::starts_on_boot($b_service)) {
-	if ($b_silentspooleronboot ||
-	    $o_in && $o_in->ask_yesorno(N("Starting the printing system at boot time"),
-			     N("The printing system (%s) will not be started automatically when the machine is booted.
-
-It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.
-
-Do you want to have the automatic starting of the printing system turned on again?",
-		       $printer::data::spoolers{$printer->{SPOOLER}}{short_name}))) {
-	    services::start_service_on_boot($b_service);
-	}
-    }
-    1;
-}
-
-sub install_spooler {
-    # installs the default spooler and start its daemon
-    my ($printer, $security, $do_pkgs, $o_in, $o_upNetwork, $b_silentspooleronboot) = @_;
-    local $::isEmbedded = 0;
-    return 1 if $::testing;
-    my $spooler = $printer->{SPOOLER};
-    # If the user refuses to install the spooler in high or paranoid
-    # security level, exit.
-    return 0 unless security_check($spooler, $security, $o_in);
-    # should not happen
-    return 0 if $spooler !~ /^(rcups|cups|lpd|lprng|pqd)$/;
-    my $w = $o_in && $o_in->wait_message(N("Printerdrake"), N("Checking installed software..."));
-
-    # "lpr" conflicts with "LPRng", remove either "LPRng" or remove "lpr"
-    my $packages = $spoolers{$spooler}{packages2rm};
-    if ($packages && files_exist($packages->[1])) {
-	undef $w;
-        $w = $o_in && $o_in->wait_message(N("Printerdrake"), N("Removing %s..."), $spoolers{$packages->[0]}{short_name});
-        $do_pkgs->remove_nodeps($packages->[0])
-	    or do {
-		$o_in && $o_in->ask_warn(N("Error"),
-			      N("Could not remove the %s printing system!",
-				$spoolers{$packages->[0]}{short_name}));
-		return 0;
-	    };
-    }
-
-    # Install all packages needed to run printerdrake and the chosen spooler
-    $packages = $spoolers{$spooler}{packages2add};
-    push (@{$packages->[0]}, @{$commonpackages->[0]});
-    push (@{$packages->[0]}, @{$localqueuepackages->[0]}) if
-	$spoolers{$spooler}{local_queues};
-    push (@{$packages->[1]}, @{$commonpackages->[1]});
-    push (@{$packages->[1]}, @{$localqueuepackages->[1]}) if
-	$spoolers{$spooler}{local_queues};
-    if (files_exist("/usr/bin/gimp") || files_exist("/usr/bin/gimp-2.2")) {
-	push (@{$packages->[0]}, @{$gimpprintingpackages->[0]});
-	push (@{$packages->[1]}, @{$gimpprintingpackages->[1]});
-    }
-    if (@{$packages->[0]} && !files_exist(@{$packages->[1]})) {
-	undef $w;
-        $w = $o_in && $o_in->wait_message(N("Printerdrake"), N("Installing %s..."), $spoolers{$spooler}{short_name});
-        $do_pkgs->install(@{$packages->[0]})
-	    or do {
-		$o_in && $o_in->ask_warn(N("Error"),
-			      N("Could not install the %s printing system!",
-				$spoolers{$spooler}{short_name}));
-		return 0;
-	    };
-    }
-
-    undef $w;
-    
-    # Start the network (especially during installation), so the
-    # user can set up queues to remote printers.
-
-    $o_upNetwork and do {
-        &$o_upNetwork(); 
-        undef $o_upNetwork; 
-        sleep(1);
-    };
-
-    # Start daemon
-    if ($spooler eq "cups") {
-        # Start daemon
-        # Avoid unnecessary restarting of CUPS, this blocks the
-        # startup of printerdrake for several seconds.
-        printer::services::start_not_running_service("cups");
-	# Remove a remote CUPS server setting from the client.conf
-	# file, otherwise the local CUPS daemon gets overridden.
-	my ($daemonless_cups, $remote_cups_server) =
-	    printer::main::read_client_conf();
-	if ($daemonless_cups) {
-	    printer::main::write_client_conf(0, $remote_cups_server);
-	}
-    } elsif ($spooler eq "rcups") {
-	# Stop CUPS daemon, we want to run daemon-less
-	services::stop("cups") if services::is_service_running("cups");
-	# Do not start CUPS daemon during boot
-	services::do_not_start_service_on_boot("cups");
-    } elsif ($spoolers{$spooler}{service}) {
-        printer::services::restart($spoolers{$spooler}{service});
-    }
-    
-    # Set the choosen spooler tools as defaults for "lpr", "lpq",
-    # "lprm", ...
-    foreach (@{$spoolers{$spooler}{alternatives}}) {
-        set_alternative($_->[0], $_->[1]);
-    }
-
-    # Remove/add PDQ panic buttons from the user's KDE Desktops
-    printer::main::pdq_panic_button($spooler eq 'pdq' ? "add" : "remove");
-
-    # Should it be started at boot time?
-    start_spooler_on_boot($printer, $o_in, $spoolers{$spooler}{boot_spooler},
-			  $b_silentspooleronboot);
-
-    # Give a SIGHUP to the devfsd daemon to correct the permissions
-    # for the /dev/... files according to the spooler
-    #printer::main::SIGHUP_daemon("devfs");
-    1;
-}
-
-sub assure_remote_server_is_set {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-    # Check if a remote CUPS server is specified
-    if (!$printer->{remote_cups_server}) {
-	my ($daemonless_cups, $remote_cups_server) =
-	    printer::main::read_client_conf();
-	if (!$daemonless_cups) {
-	    if (!$in->ask_from_
-		({ title => N("Remote CUPS server and no local CUPS daemon"),
-		   messages => N("In this mode there is no local printing system, all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine.") .
-		       "\n\n". 
-		       N("Enter the host name or IP of your CUPS server and click OK if you want to use this mode, click \"Quit\" otherwise."),
-		   cancel => N("Quit"),
-		   callbacks => {
-		       complete => sub {
-			   if ($remote_cups_server =~ /^\s*$/) {
-			       
-			       $in->ask_warn(N("Error"), N("CUPS server name or IP address missing."));
-			       return 1, 1;
-			   }
-			   return 0;
-		       },
-		   },
-	       },
-		 # Show the widgets
-		 [ { label => N("Name or IP of remote server:"),
-		     val => \$remote_cups_server, 
-		 } ],
-		 )) {
-		# Cancel was clicked
-		exit 1;
-	    }
-	    printer::main::write_client_conf(1, $remote_cups_server);
-	    $printer->{remote_cups_server} = $remote_cups_server;
-	}
-    }
-    1;
-}
-
-sub assure_default_printer_is_set {
-    my ($printer, $in) = @_;
-    if (defined($printer->{SPOOLER}) && $printer->{SPOOLER} &&
-	(!defined($printer->{DEFAULT}) || !$printer->{DEFAULT})) {
-	my $_w = $::noX || 
-	    $in->wait_message(N("Printerdrake"),
-			      N("Setting Default Printer..."));
-	$printer->{DEFAULT} = printer::default::get_printer($printer);
-	if ($printer->{DEFAULT}) {
-	    # If a CUPS system has only remote printers and no default
-	    # printer defined, it defines the first printer whose
-	    # broadcast signal appeared after the start of the CUPS
-	    # daemon, so on every start another printer gets the default
-	    # printer. To avoid this, make sure that the default printer
-	    # is defined.
-	    printer::default::set_printer($printer);
-	} else { $printer->{DEFAULT} = '' }
-    }
-}
-
-sub set_cups_daemon_mode {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-    my ($modechoice, $daemonless_cups, $remote_cups_server);
-
-    if ($in->ask_from_
-	({ title => N("Local CUPS printing system or remote CUPS server?"),
-	   messages => N("The CUPS printing system can be used in two ways: ") .
-	       "\n\n" .
-	       N("1. The CUPS printing system can run locally. ") .
-	       N("Then locally connected printers can be used and remote printers on other CUPS servers in the same network are automatically discovered. ") .
-	       N("Disadvantage of this approach is, that more resources on the local machine are needed: Additional software packages need to be installed, the CUPS daemon has to run in the background and needs some memory, and the IPP port (port 631) is opened. ") .
-	       "\n\n" .
-	       N("2. All printing requests are immediately sent to a remote CUPS server. ") .
-	       N("Here local resource occupation is reduced to a minimum. No CUPS daemon is started or port opened, no software infrastructure for setting up local print queues is installed, so less memory and disk space is used. ") .
-	       N("Disadvantage is that it is not possible to define local printers then and if the specified server is down it cannot be printed at all from this machine. ") .
-	       "\n\n" .
-	       N("How should CUPS be set up on your machine?"),
-	   callbacks => {
-	       complete => sub {
-		   if ($modechoice eq 
-		       N("Remote server, specify Name or IP here:") &&
-		       $remote_cups_server =~ /^\s*$/) {
-		       
-		       $in->ask_warn(N("Error"), N("CUPS server name or IP address missing."));
-		       return 1, 1;
-		   }
-		   return 0;
-	       },
-	   },
-       },
-	 # Show the widgets
-	 [ { val => \$modechoice, format => \&translate,
-	     type => 'list',
-	     sort => 0,
-	     list => [ N("Local CUPS printing system"),
-		       N("Remote server, specify Name or IP here:") ]},
-	   { val => \$remote_cups_server, 
-	     disabled => sub {
-		 $modechoice ne 
-		     N("Remote server, specify Name or IP here:");
-	     } },
-	   ],
-	 )) {
-	# OK was clicked, update the data
-	$daemonless_cups = 
-	    ($modechoice eq N("Remote server, specify Name or IP here:"));
-	if ($daemonless_cups) {
-	    $printer->{SPOOLER} = "rcups";
-	    $printer->{remote_cups_server} = $remote_cups_server;
-	} else {
-	    $printer->{SPOOLER} = "cups";
-	    undef $printer->{remote_cups_server};
-	}
-	printer::main::write_client_conf($daemonless_cups,
-					 $remote_cups_server);
-	return 1;
-    } else {
-	# Cancel was clicked
-	return 0;
-    }
-}
-
-
-sub setup_default_spooler {
-    my ($printer, $security, $in, $upNetwork) = @_;
-    local $::isEmbedded = 0;
-    my $oldspooler = $printer->{SPOOLER};
-    $printer->{SPOOLER} ||= 'cups';
-    my @spoolerlist = printer::main::spooler();
-    if ($#spoolerlist == 1) {
-	set_cups_daemon_mode($printer, $in) || return;
-    } else {
-	my $str_spooler = 
-	    $in->ask_from_listf_raw({ title => N("Select Printer Spooler"),
-				      messages => N("Which printing system (spooler) do you want to use?"),
-				      interactive_help_id => 'setupDefaultSpooler',
-				  },
-				    sub { translate($_[0]) },
-				    \@spoolerlist,
-				    $spoolers{$printer->{SPOOLER}}{long_name},
-				    ) or return;
-	$printer->{SPOOLER} = $spooler_inv{$str_spooler};
-    }
-    # Install the spooler if not done yet
-    if (!install_spooler($printer, $security, $in->do_pkgs, $in, $upNetwork)) {
-	$printer->{SPOOLER} = $oldspooler;
-	return;
-    }
-    assure_remote_server_is_set($printer, $in)
-	if ($printer->{SPOOLER} eq "rcups");
-    if ($printer->{SPOOLER} ne $oldspooler) {
-	# Get the queues of this spooler
-	{
-	    my $_w = $in->wait_message(N("Printerdrake"),
-				      N("Reading printer data..."));
-	    printer::main::read_configured_queues($printer);
-	}
-	# Copy queues from former spooler
-	copy_queues_from($printer, $in, $oldspooler)
-	    if ($oldspooler && ($oldspooler ne "rcups"));
-	# Re-read the printer database (CUPS has additional drivers, PDQ
-	# has no raw queue)
-	%printer::main::thedb = ();
-	assure_default_printer_is_set($printer, $in);
-    }
-    # Save spooler choice
-    printer::default::set_spooler($printer);
-    return $printer->{SPOOLER};
-}
-
-sub configure_queue {
-    my ($printer, $in) = @_;
-    local $::isEmbedded = 0;
-    my $_w = $in->wait_message(N("Printerdrake"),
-			       N("Configuring printer \"%s\"...",
-				 $printer->{currentqueue}{queue}))
-	if !$printer->{noninteractive};
-    $printer->{complete} = 1;
-    my $retval = printer::main::configure_queue($printer);
-    $printer->{complete} = 0;
-    if (!$retval && !$printer->{noninteractive}) {
-	local $::isWizard = 0;
-	$in->ask_warn(N("Printerdrake"),
-		      N("Failed to configure printer \"%s\"!",
-			$printer->{currentqueue}{queue}));
-    }
-    return $retval;
-}
-
-sub install_foomatic {
-    my ($in) = @_;
-    local $::isEmbedded = 0;
-    if (!$::testing &&
-	!files_exist(qw(/usr/bin/foomatic-configure 
-			/usr/bin/foomatic-rip
-			/usr/share/foomatic/db/source/driver/ljet4.xml
-			/usr/share/foomatic/db/source/driver/hpijs.xml))) {
-	my $_w = $in->wait_message(N("Printerdrake"),
-				   N("Installing Foomatic..."));
-	$in->do_pkgs->install('foomatic-db-engine',
-			      'foomatic-filters',
-			      'foomatic-db', 'foomatic-db-hpijs') 
-	    or do {
-		$in->ask_warn(N("Error"),
-			      N("Could not install %s packages, %s cannot be started!",
-				"Foomatic", "printerdrake"));
-		exit 1;
-	    };
-    }
-}
-
-sub wizard_close {
-    my ($in, $mode) = @_;
-    local $::isEmbedded = 0;
-    # Leave wizard mode with congratulations screen if $mode = 1
-    $::Wizard_no_previous = 1;
-    $::Wizard_no_cancel = 1;
-    $::Wizard_finished = 1;
-    wizard_congratulations($in) if $mode == 1;
-    undef $::isWizard;
-    $::WizardWindow->destroy if defined $::WizardWindow;
-    undef $::WizardWindow;
-};
-
-#- Program entry point for configuration of the printing system.
-sub main {
-    my ($printer, $security, $in, $install_step, $upNetwork) = @_;
-    # $install_step is only made use of during the installation. It is
-    # 0 when this function is called during the preparation of the "Summary"
-    # screen and 1 when the user clicks on "Configure" on the "Summary" 
-    # screen
-
-    # Initialization of Printerdrake and queue auto-installation:
-    # During installation we do this step only once, when we prepare
-    # the "Summary" screen in case of detected local printers or when
-    # the "Configure" button in the "Printer" entry of the "Summary"
-    # screen is clicked. If the button is clicked after an automatic
-    # installation of local printers or if it is clicked for the
-    # second time, these steps are not repeated.
-
-    # Set the spooler to CUPS if we arrive here during the preparation
-    # of the "Summary" screen of the installation, as we have local
-    # printers then (if we do not have local printers, this function
-    # is not called during the preparation of the "Summary" screen).
-    if (!$::isInstall || !$::printerdrake_initialized) {
-	$printer->{SPOOLER} ||= 'cups'
-	    if ($::isInstall && $install_step == 0 && !$printer->{expert});
-	init($printer, $security, $in, $upNetwork) or return;
-    }
-
-    # Main loop: During installation we only enter it when the user has
-    # clicked on the "Configure" button in the "Summary" step. We do not
-    # call it during the preparation of the "Summary" screen.
-    if (!$::isInstall || $install_step == 1) {
-	# Ask for a spooler when none is defined yet
-	$printer->{SPOOLER} ||= 
-	    setup_default_spooler($printer, $security, $in, $upNetwork) || return;
-    
-	# Save the default spooler
-	printer::default::set_spooler($printer);
-
-	mainwindow_interactive($printer, $security, $in, $upNetwork);
-    }
-    # In the installation we call the clean-up manually when we leave 
-    # the "Summary" step
-    if (!$::isInstall) {
-	final_cleanup($printer);
-    }
-}
-
-sub init {
-    my ($printer, $security, $in, $upNetwork) = @_;
-
-    # Initialization of Printerdrake and queue auto-installation
-
-    # This subroutine is called on every start of printerdrake
-    # directly, from mcc, during installation, or for automatic print
-    # queue setup in the background, triggered when
-    # hotplug/udev/dynamic (script /etc/dynamic/script/lp.script)
-    # discovers a new printer being connected and turned on.
-
-    # In the latter case (background queue installation) only this
-    # subroutine is called as only the automatic, non-interactive
-    # print queue creation is needed. This must be totally
-    # non-interactive and cannot open any window on the X desktop,
-    # also packages cannot be installed, as the background process
-    # cannot ask the user to insert CDs. To reach this state of
-    # absolute silence, there is the global variable $::noX. If it is
-    # set, all interactivity or wait message is suppressed. If
-    # interactivity is required, the operation requiring interactivity
-    # will be skipped.
-
-    # Save the user mode, so that the same one is used on the next start
-    # of Printerdrake
-    printer::main::set_usermode($printer->{expert});
-    
-    # only experts should be asked for the spooler also for background
-    # installation of print it should not be asked for the spooler,
-    # as this feature is only supported for CUPS.
-    $printer->{SPOOLER} ||= 'cups'
-	if (!$printer->{expert} || $::noX) && !$::isInstall;
-    
-    # If we have chosen a spooler, install it and mark it as default 
-    # spooler. Spooler installation is ommitted on background queue
-    # installation, because this only works when CUPS is already running
-    if ($printer->{SPOOLER}) {
-	return 0 unless ($::noX || 
-			 install_spooler($printer, $security, $in->do_pkgs, $in, $upNetwork));
-	assure_remote_server_is_set($printer, $in)
-	    if ($printer->{SPOOLER} eq "rcups") && !$::noX;
-	printer::main::read_configured_queues($printer)
-	    if (($printer->{SPOOLER} ne "rcups") &&
-		(keys(%{$printer->{configured}}) == 0));
-	printer::default::set_spooler($printer);
-    
-	# Get the default printer (Done before non-interactive queue setup,
-	# so that former default is not lost)
-	assure_default_printer_is_set($printer, $in);
-	my $nodefault = !$printer->{DEFAULT};
-
-	# Non-interactive setup of newly detected printers (This is done
-	# only when not in expert mode, so we always have a spooler defined
-	# here)
-	configure_new_printers($printer, $in, $upNetwork)
-	    if $printer->{SPOOLER} ne "rcups";
-    
-	# Make sure that default printer is registered
-	if ($nodefault && $printer->{DEFAULT}) {
-	    printer::default::set_printer($printer);
-	}
-    }
-
-    # Turn on local printer autodetection by default
-    $printer->{AUTODETECT} = 1;
-    $printer->{AUTODETECTLOCAL} = 1;
-    $printer->{AUTODETECTNETWORK} = 0;
-    $printer->{AUTODETECTSMB} = 0;
-    $printer->{CONFIGLPD} = 0;
-    
-    # Mark this part as done, it should not be done a second time.
-    if ($::isInstall) {
-	$::printerdrake_initialized = 1;
-    }
-
-    return 1;
-}
-
-sub mainwindow_interactive {
-
-    my ($printer, $security, $in, $upNetwork) = @_;
-
-    # Control variables for the main loop
-    my ($menuchoice, $cursorpos) = ('', '::');
-
-    while (1) {
-	my ($queue, $newcursorpos) = ('', 0);
-	# If networking is configured, start it, but do not ask the
-	# user to configure networking. We want to know whether we
-	# have a local network to suppress some buttons when there is
-	# no network
-	my $havelocalnetworks =
-	    check_network($printer, $in, $upNetwork, 1) && 
-	    printer::detect::getIPsInLocalNetworks() != ();
-	my $havelocalnetworks_or_expert =
-	    $printer->{expert} || $havelocalnetworks;
-#	$in->set_help('mainMenu') if $::isInstall;
-	# Initialize the cursor position
-	if ($cursorpos eq "::" && 
-	    $printer->{DEFAULT} &&
-	    $printer->{DEFAULT} ne "") {
-	    if (defined($printer->{configured}{$printer->{DEFAULT}})) {
-		$cursorpos = 
-		    $printer->{configured}{$printer->{DEFAULT}}{queuedata}{menuentry} . N(" (Default)");
-	    } elsif (($printer->{SPOOLER} eq "cups") ||
-		     ($printer->{SPOOLER} eq "rcups")){
-		$cursorpos = find { /!$printer->{DEFAULT}:[^!]*$/ } printer::cups::get_formatted_remote_queues($printer);
-	    }
-	}
-	# Generate the list of available printers
-	my @printerlist = 
-	    (sort(map { $printer->{configured}{$_}{queuedata}{menuentry} 
-			. ($_ eq $printer->{DEFAULT} ?
-			   N(" (Default)") : "") }
-		  keys(%{$printer->{configured}
-			 || {}})),
-	     (($printer->{SPOOLER} eq "cups") ||
-	      ($printer->{SPOOLER} eq "rcups") ?
-	      sort(printer::cups::get_formatted_remote_queues($printer)) :
-	      ()));
-	my $noprinters = $#printerlist < 0;
-	# Position the cursor where it was before (in case
-	# a button was pressed).
-	$menuchoice = $cursorpos;
-	# Show the main dialog
-	$in->ask_from_({ 
-	    title => N("Printerdrake"),
-	    messages => if_(!$noprinters, N("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it. ")) .
-		        if_(!$havelocalnetworks, N("\nWARNING: No local network connection active, remote printers can neither be detected nor tested!")),
-	    cancel => (""),
-	    ok => ("") },
-	    # List the queues
-	    [ if_(!$noprinters,
-		  { val => \$menuchoice, format => \&translate,
-		    sort => 0, separator => "!", tree_expanded => 1,
-		    quit_if_double_click => 1, allow_empty_list => 1,
-		    list => \@printerlist }),
-	      ($printer->{SPOOLER} ne "rcups" ?
-	       { clicked_may_quit =>
-		     sub { 
-			 # Save the cursor position
-			 $cursorpos = $menuchoice;
-			 $menuchoice = '@addprinter';
-			 1; 
-		     },
-		 val => N("Add a new printer") } : ()),
-	      ((($printer->{SPOOLER} eq "cups") ||
-		($printer->{SPOOLER} eq "rcups")) &&
-	       $havelocalnetworks ?
-	       { clicked_may_quit =>
-		     sub { 
-			 # Save the cursor position
-			 $cursorpos = $menuchoice;
-			 $menuchoice = '@refresh';
-			 1;
-		     },
-		 val => ($noprinters ?
-			 N("Display all available remote CUPS printers") :
-			 N("Refresh printer list (to display all available remote CUPS printers)")) } : ()),
-	      ((($printer->{SPOOLER} eq "cups") ||
-		($printer->{SPOOLER} eq "rcups")) &&
-	       $havelocalnetworks_or_expert ?
-	       { clicked_may_quit =>
-		      sub { 
-			  # Save the cursor position
-			  $cursorpos = $menuchoice;
-			  $menuchoice = '@cupsconfig';
-			  1;
-		      },
-		  val => N("CUPS configuration") } : ()),
-	      ($printer->{expert} && 
-	       (files_exist(qw(/usr/bin/pdq)) ||
-		files_exist(qw(/usr/lib/filters/lpf 
-			       /usr/sbin/lpd))) ?
-	       { clicked_may_quit =>
-		     sub {
-			 # Save the cursor position
-			 $cursorpos = $menuchoice;
-			 $menuchoice = '@spooler';
-			 1;
-		     },
-		 val => N("Change the printing system") } :
-	       ()),
-	      { clicked_may_quit =>
-		    sub {
-			# Save the cursor position
-			$cursorpos = $menuchoice;
-			$menuchoice = '@usermode';
-			1 
-			},
-			    val => ($printer->{expert} ? N("Normal Mode") :
-				    N("Expert Mode")) },
-	      { clicked_may_quit =>
-		    sub { $menuchoice = '@quit'; 1 },
-		    val => ($::isEmbedded || $::isInstall ?
-			    N("Done") : N("Quit")) },
-	      ]);
-	# Toggle expert mode and standard mode
-	if ($menuchoice eq '@usermode') {
-	    $printer->{expert} = printer::main::set_usermode(!$printer->{expert});
-	    # Read printer database for the new user mode
-	    %printer::main::thedb = ();
-	    # Modify menu entries to switch the tree
-	    # structure between expert/normal mode.
-	    my $spooler =
-		$spoolers{$printer->{SPOOLER}}{short_name};
-	    if ($printer->{expert}) {
-		foreach (keys(%{$printer->{configured}})) { 
-		    $printer->{configured}{$_}{queuedata}{menuentry} =~ 
-			s/^/$spooler!/;
-		}
-		$cursorpos =~ s/^/$spooler!/;
-	    } else {
-		foreach (keys(%{$printer->{configured}})) { 
-		    $printer->{configured}{$_}{queuedata}{menuentry} =~ 
-			s/^$spooler!//;
-		}
-		$cursorpos =~ s/^$spooler!//;
-	    }
-	    next;
-	}
-	# Refresh printer list
-	next if $menuchoice eq '@refresh';
-	# Configure CUPS
-	if ($menuchoice eq '@cupsconfig') {
-	    config_cups($printer, $security, $in, $upNetwork);
-	    next;
-	}
-	# Call function to switch to another spooler
-	if ($menuchoice eq '@spooler') {
-	    $printer->{SPOOLER} = setup_default_spooler($printer, $security, $in, $upNetwork) || $printer->{SPOOLER};
-	    next;
-	}
-	# Add a new print queue
-	if ($menuchoice eq '@addprinter') {
-	    $newcursorpos = add_printer($printer, $in, $upNetwork);
-	}
-	# Edit an existing print queue
-	if ($menuchoice =~ /!([^\s!:]+):[^!]*$/) {
-	    # Rip the queue name out of the chosen menu entry
-	    $queue = $1;
-	    # Save the cursor position
-	    $cursorpos = $menuchoice;
-	    # Edit the queue
-	    edit_printer($printer, $in, $upNetwork, $queue);
-	    $newcursorpos = 1;
-	}
-	#- Close printerdrake
-	$menuchoice eq '@quit' and last;
-
-	if ($newcursorpos) {
-	    # Set the cursor onto the current menu entry
-	    $queue = $printer->{QUEUE};
-	    if ($queue) {
-		# Make sure that the cursor is still at the same position
-		# in the main menu when one has modified something on the
-		# current printer
-		if (!$printer->{configured}{$printer->{QUEUE}}) {
-		    my $s1 = N(" (Default)");
-		    my $s2 = $s1;
-		    $s2 =~ s/\(/\\(/;
-		    $s2 =~ s/\)/\\)/;
-		    $cursorpos .= $s1
-			if $printer->{QUEUE} eq
-			$printer->{DEFAULT} && $cursorpos !~ /$s2/;
-		} else {
-		    $cursorpos =
-			$printer->{configured}{$queue}{queuedata}{menuentry} .
-			($queue eq $printer->{DEFAULT} ?
-			 N(" (Default)") : '');
-		}
-	    } else {
-		$cursorpos = "::";
-	    }
-	} else {
-	    delete($printer->{QUEUE});
-	}
-    }
-}
-
-sub add_printer {
-
-    my ($printer, $in, $upNetwork) = @_;
-
-    # The add-printer wizard of printerdrake, adds a queue for a local
-    # or remote printer interactively
-
-    # Tell subroutines that we add a new printer
-    $printer->{NEW} = 1;
-
-    # Printer queue name
-    my $queue = "";
-
-    #- Set default values for a new queue
-    $printer_type_inv{$printer->{TYPE}} or 
-	$printer->{TYPE} = printer::default::printer_type();
-    $printer->{currentqueue} = { queue    => "",
-				 foomatic => 0,
-				 desc     => "",
-				 loc      => "",
-				 make     => "",
-				 model    => "",
-				 printer  => "",
-				 driver   => "",
-				 connect  => "",
-				 spooler  => $printer->{SPOOLER},
-			     };
-    #- Do all the configuration steps for a new queue
-    if (!$::isInstall &&
-	$in->isa('interactive::gtk')) {
-	local $::isEmbedded = 0;
-	undef $::WizardTable;
-	undef $::WizardWindow;
-	# Enter wizard mode (only after installation)
-	$::Wizard_pix_up = "printerdrake.png";
-	$::Wizard_title = N("Add a new printer");
-	$::isWizard = 1;
-	# Wizard welcome screen
-      step_0:
-	$::Wizard_no_previous = 1;
-	undef $::Wizard_no_cancel; undef $::Wizard_finished;
-	wizard_welcome($printer, $in, $upNetwork) or do {
-	    wizard_close($in, 0);
-	    return 0;
-	};
-	undef $::Wizard_no_previous;
-	eval {
-	    #do {
-	    # eval to catch wizard cancel. The wizard stuff 
-	    # should be in a separate function with steps. see 
-	    # drakgw.
-	    $printer->{expert} or do {
-		if ($printer->{CONFIGLPD}) { 
-		    $printer->{TYPE} = "LPD";
-		} else {
-		    $printer->{TYPE} = "LOCAL";
-		}
-	    };
-	  step_1:
-	    !$printer->{expert} or choose_printer_type($printer, $in, $upNetwork) or
-		goto step_0;
-	  step_2:
-	    setup_printer_connection($printer, $in, $upNetwork) or 
-		do {
-		    goto step_1 if $printer->{expert};
-		    goto step_0;
-		};
-	    get_db_entry($printer, $in);
-	  step_3_9:
-	    if (!$printer->{expert} && !$printer->{MANUAL}) {
-		is_model_correct($printer, $in) or goto step_2;
-	    }
-	  step_4:
-	    # Remember DB entry for "Previous" button in wizard
-	    my $dbentry = $printer->{DBENTRY};
-	    if ($printer->{expert} || $printer->{MANUAL} ||
-		$printer->{MANUALMODEL}) { 
-		choose_model($printer, $in) or do {
-		    # Restore DB entry
-		    $printer->{DBENTRY} = $dbentry;
-		    goto step_3_9 if $printer->{MANUALMODEL};
-		    goto step_2;
-		};
-	    }
-	    get_printer_info($printer, $in) or do {
-		goto step_4 if $printer->{expert} || $printer->{MANUAL} ||
-		    $printer->{MANUALMODEL};
-		goto step_3_9;
-	    };
-	    $queue = generate_queuename($printer);
-	  step_5:
-	    setup_options($printer, $in) or
-		goto step_4;
-	  step_6:
-	    if ($printer->{expert} || $printer->{MANUAL} ||
-		$printer->{MORETHANONE}) {
-		choose_printer_name($printer, $in) or do {
-		    goto step_5 if $printer->{expert} || $printer->{MANUAL};
-		    goto step_4 if $printer->{MANUALMODEL};
-		    goto step_3_9;
-		}
-	    }
-	    configure_queue($printer, $in) or die 'wizcancel';
-	    undef $printer->{MANUAL} if $printer->{MANUAL};
-	  step_7:
-	    $::Wizard_no_previous = 1;
-	    setasdefault($printer, $in);
-	    my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
-	    if ($testpages == 1) {
-		# User was content with test pages
-		# Leave wizard mode with congratulations screen
-		wizard_close($in, 1);
-	    } elsif ($testpages == 2) {
-		# User was not content with test pages
-		# Leave wizard mode without congratulations
-		# screen
-		wizard_close($in, 0);
-		$queue = $printer->{QUEUE};
-		edit_printer($printer, $in, $upNetwork, $queue);
-		return 1;
-	    } else {
-		# "Previous" button clicked in test page dialog
-		goto step_7;
-	    }
-	};
-	die if $@ && $@ !~ /^wizcancel/;
-	wizard_close($in, 0);
-    } else {
-	# Print queue setup without wizard (for installation)
-	$printer->{expert} or $printer->{TYPE} = "LOCAL";
-	wizard_welcome($printer, $in, $upNetwork) or return 0;
-	    $printer->{expert} or do {
-		if ($printer->{CONFIGLPD}) { 
-		    $printer->{TYPE} = "LPD";
-		} else {
-		    $printer->{TYPE} = "LOCAL";
-		}
-	    };
-	!$printer->{expert} or choose_printer_type($printer, $in, $upNetwork) or return 0;
-	setup_printer_connection($printer, $in, $upNetwork) or return 0;
-	get_db_entry($printer, $in);
-	if (!$printer->{expert} && !$printer->{MANUAL}) {
-	    is_model_correct($printer, $in) or return 0;
-	}
-	if ($printer->{expert} || $printer->{MANUAL} ||
-	    $printer->{MANUALMODEL}) { 
-	    choose_model($printer, $in) or return 0;
-	}
-	get_printer_info($printer, $in) or return 0;
-	$queue = generate_queuename($printer);
-	setup_options($printer, $in) or return 0;
-	if ($printer->{expert} || $printer->{MANUAL} ||
-	    $printer->{MORETHANONE}) {
-	    choose_printer_name($printer, $in) or return 0;
-	}
-	configure_queue($printer, $in) or return 0;
-	undef $printer->{MANUAL} if $printer->{MANUAL};
-	setasdefault($printer, $in);
-	my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork);
-	if ($testpages == 2) {
-	    # User was not content with test pages
-	    $queue = $printer->{QUEUE};
-	    edit_printer($printer, $in, $upNetwork, $queue);
-	    return 1;
-	}
-    };
-
-    # Delete some variables
-    cleanup($printer);
-
-    return 1;
-}
-
-sub edit_printer {
-
-    my ($printer, $in, $upNetwork, $queue) = @_;
-
-    # The menu for doing modifications on an existing print queue
-
-    # Cursor position in queue modification window
-    my $modify = N("Printer options");
-
-    # Tell subroutines that we modify the printer
-    $printer->{NEW} = 0;
-
-    while (defined($printer->{QUEUE}) || 
-	   defined($queue)) {  # Do not continue when current queue
-	                       # is deleted
-	# Modify a queue, ask which part should be modified
-#	$in->set_help('modifyPrinterMenu') if $::isInstall;
-	# Get some info to display
-	my $infoline;
-	if ($printer->{configured}{$queue}) {
-	    # Here we must regenerate the menu entry, because the
-	    # parameters can be changed.
-	    printer::main::make_menuentry($printer,$queue);
-	    if ($printer->{configured}{$queue}{queuedata}{menuentry} =~
-		/!([^!]+)$/) {
-		$infoline = $1 .
-		    ($queue eq $printer->{DEFAULT} ? N(" (Default)") : '') .
-		    ($printer->{configured}{$queue}{queuedata}{desc} ?
-		     ", Descr.: $printer->{configured}{$queue}{queuedata}{desc}" : '') .
-		     ($printer->{configured}{$queue}{queuedata}{loc} ?
-		      ", Loc.: $printer->{configured}{$queue}{queuedata}{loc}" : '') .
-		      ($printer->{expert} ?
-		       ", Driver: $printer->{configured}{$queue}{queuedata}{driver}" : '');
-	    }
-	} else {
-	    # Extract the entry for a remote CUPS queue from the menu entry
-	    # for it.
-	    my $menuentry = find { /!$queue:[^!]*$/ } printer::cups::get_formatted_remote_queues($printer);
-	    $infoline = $1 if $menuentry =~ /!([^!]+)$/;
-	}
-	# Mark the printer queue which we edit
-	$printer->{QUEUE} = $queue;
-	if ($in->ask_from_(
-	    { title => N("Modify printer configuration"),
-	      messages => 
-		  N("Printer %s%s
-What do you want to modify on this printer?",
-		    $infoline,
-		    if_(($printer->{SPOOLER} =~ /cups/) &&
-			!printer::cups::queue_enabled($queue),
-			"\n" . N("This printer is disabled"))),
-		  cancel => N("Close"),
-		  ok => N("Do it!")
-	      },
-	    [ { val => \$modify, format => \&translate, 
-		type => 'list', separator => '|',
-		list => [ ($printer->{configured}{$queue} ?
-			   (N("Printer connection type"),
-			    N("Printer name, description, location"),
-			    ($printer->{expert} ?
-			     N("Printer manufacturer, model, driver") :
-			     N("Printer manufacturer, model")),
-			    if_($printer->{configured}{$queue}{queuedata}{make} ne "" &&
-				$printer->{configured}{$queue}{queuedata}{model} ne N("Unknown model") &&
-				$printer->{configured}{$queue}{queuedata}{model} ne N("Raw printer"),
-				N("Printer options"))) : ()),
-			  if_($queue ne $printer->{DEFAULT},
-			      N("Set this printer as the default")),
-			  if_(($printer->{SPOOLER} ne "pdq") &&
-			      $printer->{configured}{$queue},
-			      if_(($printer->{SPOOLER} !~ /cups/) ||
-				  !printer::cups::queue_enabled($queue),
-				  N("Enable Printer")),
-			      if_(($printer->{SPOOLER} !~ /cups/) ||
-				  printer::cups::queue_enabled($queue),
-				  N("Disable Printer"))),
-			  N("Print test pages"),
-			  N("Learn how to use this printer"),
-			  if_($printer->{configured}{$queue}, N("Remove printer")) ] } ])) {
-
-	    #- Copy the queue data and work on the copy
-	    $printer->{currentqueue} = {};
-	    if ($printer->{configured}{$queue}) {
-		printer::main::copy_printer_params($printer->{configured}{$queue}{queuedata}, $printer->{currentqueue});
-	    }
-	    #- keep in mind old name of queue (in case of changing)
-	    $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue;
-	    #- Reset some variables
-	    $printer->{OLD_CHOICE} = undef;
-	    $printer->{DBENTRY} = undef;
-	    #- Which printer type did we have before (check 
-	    #- beginning of URI)
-	    if ($printer->{configured}{$queue}) {
-		if ($printer->{currentqueue}{connect} =~ m!^ptal://?hpjd!) {
-		    $printer->{TYPE} = "socket";
-		} else {
-		    foreach my $type (qw(file parallel serial usb ptal hp
-					 mtink lpd socket smb ncp
-					 postpipe)) {
-			if ($printer->{currentqueue}{connect} =~
-			    /^$type:/) {
-			    $printer->{TYPE} = 
-				($type =~ 
-				 /(file|parallel|serial|usb|ptal|hp|mtink)/ ? 
-				 'LOCAL' : uc($type));
-			    last;
-			}
-		    }
-		}
-	    }
-
-	    # Do the chosen task
-	    if ($modify eq N("Printer connection type")) {
-		choose_printer_type($printer, $in, $upNetwork) &&
-		    setup_printer_connection($printer, $in, $upNetwork) &&
-		    #get_db_entry($printer, $in) &&
-		    get_printer_info($printer, $in) &&
-		    configure_queue($printer, $in);
-	    } elsif ($modify eq N("Printer name, description, location")) {
-		choose_printer_name($printer, $in) and
-		    get_printer_info($printer, $in) and
-		    configure_queue($printer, $in) or next;
-		# Delete old queue when it was renamed
-		if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
-		    my $_w = $in->wait_message(
-			 N("Printerdrake"),
-			 N("Removing old printer \"%s\"...",
-			   $printer->{OLD_QUEUE}));
-		    printer::main::remove_queue($printer, $printer->{OLD_QUEUE});
-		    # If the default printer was renamed, correct the
-		    # the default printer setting of the spooler
-		    if ($queue eq $printer->{DEFAULT}) {
-			$printer->{DEFAULT} = $printer->{QUEUE};
-			printer::default::set_printer($printer);
-		    }
-		    $queue = $printer->{QUEUE};
-		}
-	    } elsif ($modify eq N("Printer manufacturer, model, driver") ||
-		     $modify eq N("Printer manufacturer, model")) {
-		get_db_entry($printer, $in);
-		choose_model($printer, $in) &&
-		    get_printer_info($printer, $in) &&
-		    setup_options($printer, $in) &&
-		    configure_queue($printer, $in);
-	    } elsif ($modify eq N("Printer options")) {
-		get_printer_info($printer, $in) &&
-		    setup_options($printer, $in) &&
-		    configure_queue($printer, $in);
-	    } elsif ($modify eq N("Set this printer as the default")) {
-		default_printer($printer, $in, $queue);
-		# The "Set this printer as the default" menu entry will
-		# disappear if the printer is the default, so go back to the
-		# default entry
-		$modify = N("Printer options");
-	    } elsif ($modify eq N("Enable Printer")) {
-		printer::main::enable_disable_queue($printer, $queue, 1) &&
-		    $in->ask_warn(N("Enable Printer"),
-				  N("Printer \"%s\" is now enabled.", 
-				    $queue));
-	    } elsif ($modify eq N("Disable Printer")) {
-		printer::main::enable_disable_queue($printer, $queue, 0) &&
-		    $in->ask_warn(N("Disable Printer"),
-				  N("Printer \"%s\" is now disabled.", 
-				    $queue));
-	    } elsif ($modify eq N("Print test pages")) {
-		print_testpages($printer, $in, $upNetwork);
-	    } elsif ($modify eq N("Learn how to use this printer")) {
-		printer_help($printer, $in);
-	    } elsif ($modify eq N("Remove printer")) {
-		if (remove_printer($printer, $in, $queue)) {
-		    # Let the main menu cursor go to the default
-		    # position
-		    delete $printer->{QUEUE};
-		    undef $queue;
-		}
-	    }
-
-	    # Delete some variables
-	    cleanup($printer);
-	} else {
-	    # User closed the dialog
-
-	    # Delete some variables
-	    cleanup($printer);
-
-	    last;
-	}
-    }
-}
-
-sub remove_printer {
-
-    my ($printer, $in, $queue) = @_;
-
-    # Asks the user whether he really wants to remove the selected printer
-    # and, if yes, removes it. The default printer will be reassigned if
-    # needed.
-
-    if ($in->ask_yesorno(
-	 N("Warning"), N("Do you really want to remove the printer \"%s\"?", $queue),
-	 1)) {
-	my $_w = $in->wait_message(
-	     N("Printerdrake"),
-	     N("Removing printer \"%s\"...", $queue));
-	if (printer::main::remove_queue($printer, $queue)) { 
-	    # Define a new default printer if we have
-	    # removed the default one
-	    if ($queue eq $printer->{DEFAULT}) {
-		my @k = sort(keys %{$printer->{configured}});
-		$printer->{DEFAULT} = $k[0];
-		printer::default::set_printer($printer) if @k;
-	    }
-	    return 1;
-	}
-    }
-    return 0;
-}
-
-sub default_printer {
-
-    my ($printer, $in, $queue) = @_;
-
-    # Makes the given queue the default queue and gives an information
-    # message
-
-    $printer->{DEFAULT} = $queue;
-    printer::default::set_printer($printer);
-    $in->ask_warn(N("Default printer"),
-		  N("The printer \"%s\" is set as the default printer now.",
-		    $queue));
-    return 1;
-}
-
-sub cleanup {
-    my ($printer) = @_;
-    # Clean up the $printer data structure after printer manipulations
-    foreach (qw(OLD_QUEUE TYPE str_type DBENTRY ARGS 
-		OLD_CHOICE MANUAL)) {
-	delete($printer->{$_});
-    }
-    $printer->{currentqueue} = {};
-    $printer->{complete} = 0;
-}
-
-sub final_cleanup {
-    my ($printer) = @_;
-    # Clean up the $printer data structure for auto-install log
-    foreach my $queue (keys %{$printer->{configured}}) {
-	foreach my $item (keys %{$printer->{configured}{$queue}}) {
-	    delete($printer->{configured}{$queue}{$item}) if $item ne "queuedata";
-	}
-	delete($printer->{configured}{$queue}{queuedata}{menuentry});
-    }
-    foreach (qw(Old_queue OLD_QUEUE QUEUE TYPE str_type currentqueue DBENTRY ARGS complete OLD_CHOICE NEW MORETHANONE MANUALMODEL AUTODETECT AUTODETECTLOCAL AUTODETECTNETWORK AUTODETECTSMB CONFIGLPD noninteractive expert))
-    { delete $printer->{$_} };
-}
-
diff --git a/perl-install/printer/services.pm b/perl-install/printer/services.pm
deleted file mode 100644
index adb2587fe..000000000
--- a/perl-install/printer/services.pm
+++ /dev/null
@@ -1,61 +0,0 @@
-package printer::services;
-
-use strict;
-use services;
-use run_program;
-
-sub restart ($) {
-    my ($service) = @_;
-    if (services::restart($service)) {
-	# CUPS needs some time to come up.
-	wait_for_cups() if $service eq "cups";
-	return 1;
-    } else { return 0 }
-}
-
-sub start ($) {
-    my ($service) = @_;
-    if (services::start($service)) {
-	# CUPS needs some time to come up.
-	wait_for_cups() if $service eq "cups";
-	return 1;
-    } else { return 0 }
-}
-
-sub start_not_running_service ($) {
-    my ($service) = @_;
-    # The exit status is not zero when the service is not running
-    if (services::start_not_running_service($service)) {
-	return 0;
-    } else { 
-	run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", "start");
-	if (($? >> 8) != 0) {
-	    return 0;
-	} else {
-	    # CUPS needs some time to come up.
-	    wait_for_cups() if $service eq "cups";
-	    return 1;
-	}
-    }
-}
-
-sub wait_for_cups() {
-    # CUPS needs some time to come up. Wait up to 30 seconds, checking
-    # whether CUPS is ready.
-    my $cupsready = 0;
-    my $i;
-    for ($i = 0; $i < 30; $i++) {
-	run_program::rooted($::prefix, "/usr/bin/lpstat", "-r");
-	if (($? >> 8) != 0) {
-	    # CUPS is not ready, continue
-	    sleep 1;
-	} else {
-	    # CUPS is ready, quit
-	    $cupsready = 1;
-	    last;
-	}
-    }
-    return $cupsready;
-}
-
-1;
diff --git a/perl-install/raid.pm b/perl-install/raid.pm
deleted file mode 100644
index 3b66c8c08..000000000
--- a/perl-install/raid.pm
+++ /dev/null
@@ -1,273 +0,0 @@
-package raid; # $Id$
-
-use diagnostics;
-use strict;
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use fs::type;
-use run_program;
-use devices;
-use modules;
-use fs;
-
-sub max_nb() { 31 }
-
-sub check_prog {
-    my ($in) = @_;
-    $::isInstall || $in->do_pkgs->ensure_binary_is_installed('mdadm', 'mdadm');
-}
-
-sub new {
-    my ($raids, %opts) = @_;
-    my $md_part = { %opts };
-    add2hash_($md_part, { 'chunk-size' => '64', disks => [], 
-			  fs_type => 'ext3',
-			  device => first(free_mds($raids)), 
-			  notFormatted => 1, level => 1 });
-    push @$raids, $md_part;
-    foreach (@{$md_part->{disks}}) {
-	$_->{raid} = $md_part->{device};
-	fs::type::set_pt_type($_, 0xfd);
-	delete $_->{mntpoint};
-    }
-    update($md_part);
-    $md_part;
-}
-
-sub add {
-    my ($md_part, $part) = @_;
-    $md_part->{isMounted} and die N("Can not add a partition to _formatted_ RAID %s", $md_part->{device});
-    inactivate_and_dirty($md_part);
-    set_isFormatted($part, 0);
-    $part->{raid} = $md_part->{device};
-    delete $part->{mntpoint};
-    push @{$md_part->{disks}}, $part;
-    update($md_part);
-}
-
-sub delete {
-    my ($raids, $md_part) = @_;
-    inactivate_and_dirty($md_part);
-    delete $_->{raid} foreach @{$md_part->{disks}};
-    @$raids = grep { $_ != $md_part } @$raids;
-}
-
-sub change_device {
-    my ($md_part, $new_device) = @_;
-    if ($new_device ne $md_part->{device}) {
-	inactivate_and_dirty($md_part);
-	$md_part->{device} = $new_device;
-	$_->{raid} = $new_device foreach @{$md_part->{disks}};
-    }
-}
-
-sub removeDisk {
-    my ($raids, $part) = @_;
-    my $md_part = fs::get::device2part($part->{raid}, $raids);
-    inactivate_and_dirty($md_part);
-    fs::type::set_isFormatted($part, 0);
-    delete $part->{raid};
-    my $disks = $md_part->{disks};
-    @$disks = grep { $_ != $part } @$disks;
-    if (@$disks) {
-	update($md_part);
-    } else {
-	@$raids = grep { $_ != $md_part } @$raids;
-    }
-}
-
-sub updateSize {
-    my ($part) = @_;
-    local $_ = $part->{level};
-    my @l = map { $_->{size} } @{$part->{disks}};
-
-    $part->{size} = do {
-	if (/0|linear/) { sum @l        }
-	elsif (/1/)     { min @l        }
-	elsif (/4|5/)   { min(@l) * $#l }
-    };
-}
-
-sub module {
-    my ($part) = @_;
-    my $mod = $part->{level};
-
-    $mod = 5 if $mod eq "4";
-    $mod = "raid$mod" if $mod =~ /^\d+$/;
-    $mod;
-}
-
-
-sub update {
-    updateSize($_) foreach @_;
-}
-
-sub make {
-    my ($raids, $part) = @_;    
-
-    return if is_active($part->{device});
-
-    inactivate_and_dirty($part);
-
-    isRAID($_) and make($raids, $_) foreach @{$part->{disks}};
-    eval { modules::load(module($part)) };
-
-    whereis_binary('mdadm') or die 'mdadm not installed';
-
-    my $dev = devices::make($part->{device});
-
-    run_program::run_or_die('mdadm', '--create', '--run', $dev, 
-			    '--chunk=' . $part->{'chunk-size'}, 
-			    "--level=$part->{level}", 
-			    '--raid-devices=' . int(@{$part->{disks}}),
-			    map { devices::make($_->{device}) } @{$part->{disks}});
-
-    if (my $raw_part = get_md_info($dev)) {
-	$part->{UUID} = $raw_part->{UUID};
-    }
-}
-
-sub format_part {
-    my ($raids, $part) = @_;
-    $part->{isFormatted} and return;
-
-    make($raids, $part);
-    fs::format::part_raw($part, undef);
-    set_isFormatted($_, 1) foreach @{$part->{disks}};
-}
-
-sub verify {
-    my ($raids) = @_;
-    foreach (@$raids) {
-	@{$_->{disks}} >= ($_->{level} =~ /4|5/ ? 3 : 2) or die N("Not enough partitions for RAID level %d\n", $_->{level});
-    }
-}
-
-sub inactivate_and_dirty {
-    my ($part) = @_;
-    run_program::run('mdadm', '--stop', devices::make($part->{device}));
-    set_isFormatted($part, 0);
-}
-
-sub active_mds() {
-    map { if_(/^(md\d+)\s*:\s*active/, $1) } cat_("/proc/mdstat");
-}
-sub inactive_mds() {
-    map { if_(/^(md\d+)\s*:\s*inactive/, $1) } cat_("/proc/mdstat");
-}
-
-sub free_mds {
-    my ($raids) = @_;
-    difference2([ map { "md$_" } 0 .. raid::max_nb() ], [ map { $_->{device} } @$raids ]);
-}
-
-sub detect_during_install {
-    my (@parts) = @_;
-    detect_during_install_once(@parts);
-    detect_during_install_once(@parts) if active_mds(); #- try again to detect RAID 10
-
-    foreach (inactive_mds()) {
-	log::l("$_ is an inactive md, we stop it to ensure it doesn't busy devices");
-	run_program::run('mdadm', '--stop', devices::make($_));
-    }
-}
-
-sub detect_during_install_once {
-    my (@parts) = @_;
-    devices::make("md$_") foreach 0 .. max_nb();
-    output('/etc/mdadm.conf', join(' ', 'DEVICE', 
-				   (map { "/dev/$_" } active_mds()), 
-				   map { devices::make($_->{device}) } @parts), "\n");
-    run_program::run('mdadm', '>>', '/etc/mdadm.conf', '--examine', '--scan');
-
-    foreach (@{parse_mdadm_conf(scalar cat_('/etc/mdadm.conf'))->{ARRAY}}) {
-	eval { modules::load($_->{level}) };
-    }
-    run_program::run('mdadm', '--assemble', '--scan');    
-}
-
-sub get_existing {
-    my @parts = @_;
-    my $raids = [];
-    foreach my $md (active_mds()) {
-	my $raw_part = get_md_info(devices::make($md)) or next;
-
-	$raw_part->{level} =~ s/raid//; #- { linear | raid0 | raid1 | raid5 } -> { linear | 0 | 1 | 5 }
-
-	my @mdparts = 
-	  map { 
-	      if (my $part = fs::get::device2part($_, [ @parts, @$raids ])) {
-		  $part;
-	      } else {
-		  log::l("ERROR: unknown raw raid device $_");
-		  ();
-	      }
-	  } split(',', $raw_part->{devices});
-
-	my $md_part = new($raids, device => $md, UUID => $raw_part->{UUID}, level => $raw_part->{level}, disks => \@mdparts);
-
-	my $type = fs::type::type_subpart_from_magic($md_part);
-	if ($type) {
-	    put_in_hash($md_part, $type);
-	} else {
-	    fs::type::set_fs_type($md_part, 'ext3');
-	}
-	my $fs_type = $type && $type->{fs_type};
-	fs::type::set_isFormatted($md_part, to_bool($fs_type));
-
-	log::l("RAID: found $md (raid $md_part->{level}) type $fs_type with parts $raw_part->{devices}");
-    }
-    $raids;
-}
-
-sub is_active {
-    my ($dev) = @_;
-    member($dev, active_mds());
-}
-
-sub inactivate_all() { 
-    run_program::run('mdadm', '--stop', devices::make($_)) foreach active_mds();
-}
-
-sub prepare_prefixed {
-    my ($raids) = @_;
-
-    @$raids or return;
-
-    my @devices = uniq(map { devices::make($_->{device}) } map { @{$_->{disks}} } @$raids);
-
-    output("$::prefix/etc/mdadm.conf",
-	   join(' ', 'DEVICE', @devices) . "\n",
-	   map { "ARRAY " . devices::make($_->{device}) . " UUID=$_->{UUID} auto=yes\n" } @$raids);
-}
-
-sub get_md_info {
-    my ($dev) = @_;
-    my $conf = parse_mdadm_conf(scalar run_program::get_stdout('mdadm', '--detail', '--brief', $dev));
-
-    @{$conf->{ARRAY}} or return;
-    @{$conf->{ARRAY}} == 1 or internal_error("too many answers");
-    $conf->{ARRAY}[0];
-}
-
-sub parse_mdadm_conf {
-    my ($s) = @_;
-    my %conf = (DEVICE => [], ARRAY => []);
-    $s =~ s!^\s*#.*!!gm; #- remove comments
-    $s =~ s!\n(\s)!$1!g; #- join lines starting with a space
-    foreach (split("\n", $s)) {
-	if (/^DEVICE\s+(.*)/) {
-	    push @{$conf{DEVICE}}, split(' ', $1);
-	} elsif (my ($md, $md_conf) = /^ARRAY\s+(\S+)\s*(.*)/) {
-	    my %md_conf = map { if_(/(.*)=(.*)/, $1 => $2) } split(' ', $md_conf);
-	    $md_conf{device} = $md;
-	    push @{$conf{ARRAY}}, \%md_conf;
-	}
-    }
-    \%conf;
-}
-
-1;
diff --git a/perl-install/resize_fat/.cvsignore b/perl-install/resize_fat/.cvsignore
deleted file mode 100644
index 3001c7424..000000000
--- a/perl-install/resize_fat/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-blib
-pm_to_blib
-Makefile_c
-c_rewritten.c
-c_rewritten.bs
diff --git a/perl-install/resize_fat/Makefile b/perl-install/resize_fat/Makefile
deleted file mode 100644
index 9078b361a..000000000
--- a/perl-install/resize_fat/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-.PHONY: clean
-
-c_rewritten: %: %.xs
-	test -e Makefile_c || perl Makefile.PL
-	$(MAKE) -f Makefile_c LD_RUN_PATH= || $(MAKE) -f Makefile_c LD_RUN_PATH=
-	rm -f ../auto/resize_fat ; ln -s ../resize_fat/blib/arch/auto ../auto/resize_fat
-
-clean:
-	test ! -e Makefile_c || $(MAKE) -f Makefile_c clean
-	rm -f *~ *.o
diff --git a/perl-install/resize_fat/Makefile.PL b/perl-install/resize_fat/Makefile.PL
deleted file mode 100644
index 712f4e395..000000000
--- a/perl-install/resize_fat/Makefile.PL
+++ /dev/null
@@ -1,13 +0,0 @@
-use ExtUtils::MakeMaker;
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-
-WriteMakefile(
-    'MAKEFILE'  => 'Makefile_c',
-    'NAME'	=> 'c_rewritten',
-    'OPTIMIZE'  => '-Os',
-    'VERSION_FROM' => 'c_rewritten.pm', # finds $VERSION
-    'LIBS'	=> '',   # e.g., '-lm' 
-    'DEFINE'	=> '',     # e.g., '-DHAVE_SOMETHING' 
-    'INC'	=> '',     # e.g., '-I/usr/include/other' 
-);
diff --git a/perl-install/resize_fat/README b/perl-install/resize_fat/README
deleted file mode 100644
index 12b64dea9..000000000
--- a/perl-install/resize_fat/README
+++ /dev/null
@@ -1,8 +0,0 @@
-TODO:
-
-resize_fat::fat::update($fs) should be called before doing undoable things
-(before the sync in construct_dir_tree)
-
-BUGS:
-no known bugs :)
-if you found one, please mail pixel@mandrakesoft.com !!
diff --git a/perl-install/resize_fat/any.pm b/perl-install/resize_fat/any.pm
deleted file mode 100644
index 59ec02098..000000000
--- a/perl-install/resize_fat/any.pm
+++ /dev/null
@@ -1,122 +0,0 @@
-package resize_fat::any; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw($FREE $FILE $DIRECTORY $UNMOVEABLE);
-
-use common;
-use resize_fat::fat;
-use resize_fat::directory;
-use resize_fat::dir_entry;
-use resize_fat::c_rewritten;
-
-
-$FREE       = 0;
-$FILE       = 1;
-$DIRECTORY  = 2;
-$UNMOVEABLE = 8;
-
-
-1;
-
-
-#- returns the number of clusters for a given filesystem type
-sub min_cluster_count($) {
-    my ($fs) = @_;
-    (1 << ${{ FAT16 => 12, FAT32 => 12 }}{$fs->{fs_type}}) - 12;
-}
-sub max_cluster_count($) {
-    my ($fs) = @_;
-    (1 << ${{ FAT16 => 16, FAT32 => 28 }}{$fs->{fs_type}}) - 11;
-}
-
-
-
-#- patch to get the function last_used that return the last used cluster of a fs.
-sub last_used($) {
-    my ($fs) = @_;
-
-    #- count in negative so absolute value count back to 2.
-    foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if resize_fat::c_rewritten::flag(-$_) }
-    die "any: empty FAT table of $fs->{nb_clusters} clusters";
-}
-#- patch to get the function last_unmoveable that return the last unmoveable cluster of a fs.
-sub last_unmoveable($) {
-    my ($fs) = @_;
-
-    #- count in negative so absolute value count back to 2.
-    foreach (-($fs->{nb_clusters}+1)..-2) { return -$_ if 0x8 & resize_fat::c_rewritten::flag(-$_) }
-
-    #- Oh at this point there are no unmoveable blocks!
-    2;
-}
-
-#- calculates the minimum size of a partition, in physical sectors
-sub min_size($) {
-    my ($fs) = @_;
-    my $count = $fs->{clusters}{count};
-
-    #- directories are both in `used' and `dirs', so are counted twice
-    #- It's done on purpose since we're moving all directories. So at the worse
-    #- moment, 2 directories are there, but that way nothing wrong can happen :)
-    my $min_cluster_count = max(2 + $count->{used} + $count->{bad} + $count->{dirs}, min_cluster_count($fs));
-    $min_cluster_count = max($min_cluster_count, last_unmoveable($fs));
-
-    my $size = $min_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-      divide($fs->{cluster_offset}, $SECTORSIZE) +
-    64*1024*1024 / $SECTORSIZE; #- help with such more sectors (ie 64Mb).
-    
-    #- help zindozs again with 512Mb+ at least else partition is ignored.
-    if ($resize_fat::isFAT32) {
-        $size = max($size, 524*1024*1024 / $SECTORSIZE);
-    }
-    $size;
-
-}
-#- calculates the maximum size of a partition, in physical sectors
-sub max_size($) {
-    my ($fs) = @_;
-
-    my $max_cluster_count = min($fs->{nb_fat_entries} - 2, max_cluster_count($fs));
-
-    $max_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-	divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-#- calculates used size in order to avoid modifying anything.
-sub used_size($) {
-    my ($fs) = @_;
-
-    my $used_cluster_count = max(last_used($fs), min_cluster_count($fs));
-
-    $used_cluster_count * divide($fs->{cluster_size}, $SECTORSIZE) +
-	divide($fs->{cluster_offset}, $SECTORSIZE);
-}
-
-#- fills in fat_flag_map in c_rewritten.
-#- Each FAT entry is flagged as either FREE, FILE or DIRECTORY.
-sub flag_clusters {
-    my ($fs) = @_;
-    my ($cluster, $curr_dir_name, $entry, $type, $nb_dirs);
-
-    my $f = sub {
-	($curr_dir_name, $entry) = @_;
-	$cluster = resize_fat::dir_entry::get_cluster($entry);
-
-	if (resize_fat::dir_entry::is_file($entry)) {
-	    $type = $FILE;
-	    $type |= $UNMOVEABLE if resize_fat::dir_entry::is_unmoveable($entry);
-	} elsif (resize_fat::dir_entry::is_directory($entry)) {
-	    $type = $DIRECTORY;
-	} else { return }
-
-	my $nb = resize_fat::c_rewritten::checkFat($cluster, $type, "$curr_dir_name/$entry->{name}");
-	$nb_dirs += $nb if $type == $DIRECTORY;
-	0;
-    };
-
-    #- this must call allocate_fat_flag that zeroes the buffer allocated.
-    resize_fat::c_rewritten::allocate_fat_flag($fs->{nb_clusters} + 2);
-
-    resize_fat::directory::traverse_all($fs, $f);
-    $fs->{clusters}{count}{dirs} = $nb_dirs;
-}
diff --git a/perl-install/resize_fat/boot_sector.pm b/perl-install/resize_fat/boot_sector.pm
deleted file mode 100644
index dd09755cc..000000000
--- a/perl-install/resize_fat/boot_sector.pm
+++ /dev/null
@@ -1,110 +0,0 @@
-package resize_fat::boot_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-use resize_fat::any;
-use resize_fat::directory;
-
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a3 a8 S C S C S S C S S S I I I S S I S S a458 S";
-my @fields = (
-    'boot_jump',		#- boot strap short or near jump
-    'system_id',		#- Name - can be used to special case partition manager volumes
-    'sector_size',		#- bytes per logical sector
-    'cluster_size_in_sectors',	#- sectors/cluster
-    'nb_reserved',		#- reserved sectors
-    'nb_fats',			#- number of FATs
-    'nb_root_dir_entries',	#- number of root directory entries
-    'small_nb_sectors',		#- number of sectors: big_nb_sectors supersedes
-    'media',			#- media code
-    'fat16_fat_length',		#- sectors/FAT for FAT12/16
-    'sectors_per_track',
-    'nb_heads',
-    'nb_hidden',		#- (unused)
-    'big_nb_sectors',		#- number of sectors (if small_nb_sectors == 0)
-
-#- FAT32-only entries
-    'fat32_fat_length',		#- size of FAT in sectors
-    'fat32_flags',		#- bit8: fat mirroring,
-				#- low4: active fat
-    'fat32_version',		#- minor * 256 + major
-    'fat32_root_dir_cluster',
-    'info_offset_in_sectors',
-    'fat32_backup_sector',
-
-#- Common again...
-    'boot_code',		#- Boot code (or message)
-    'boot_sign',		#- 0xAA55
-);
-
-1;
-
-
-#- trimfs_init_boot_sector() - reads in the boot sector - gets important info out
-#- of boot sector, and puts in main structure - performs sanity checks - returns 1
-#- on success, 0 on failureparameters: filesystem an empty structure to fill.
-sub read($) {
-    my ($fs) = @_;
-
-    my $boot = eval { resize_fat::io::read($fs, 0, $SECTORSIZE) }; $@ and die "reading boot sector failed on device $fs->{fs_name}";
-    @$fs{@fields} = unpack $format, $boot;
-
-    $fs->{nb_sectors} = $fs->{small_nb_sectors} || $fs->{big_nb_sectors};
-    $fs->{cluster_size} = $fs->{cluster_size_in_sectors} * $fs->{sector_size};
-
-    $fs->{boot_sign} == 0xAA55 or die "Invalid signature for a MS-based filesystem.\n";
-    $fs->{nb_sectors} < 32 and die "Too few sectors for viable file system\n";
-    $fs->{nb_fats} == 2 or cdie "Weird number of FATs: $fs->{nb_fats}, not 2.\n";
-    $fs->{sector_size} == 512 or cdie "Strange sector_size != 512\n";
-
-    if ($fs->{fat16_fat_length}) {
-	#- asserting FAT16, will be verified later on
-	$resize_fat::isFAT32 = 0;
-        $fs->{fs_type} = 'FAT16';
-	$fs->{fs_type_size} = 16;
-	$fs->{fat_length} = $fs->{fat16_fat_length};
-	$resize_fat::bad_cluster_value = 0xfff7; #- 2**16 - 1
-    } else {
-	$resize_fat::isFAT32 = 1;
-        $fs->{fs_type} = 'FAT32';
-        $fs->{fs_type_size} = 32;
-	$fs->{fat_length} = $fs->{fat32_fat_length};
-
-	$fs->{nb_root_dir_entries} = 0;
-	$fs->{info_offset} = $fs->{info_offset_in_sectors} * $fs->{sector_size};
-	$resize_fat::bad_cluster_value = 0x0ffffff7;
-    }
-
-    $fs->{fat_offset} = $fs->{nb_reserved} * $fs->{sector_size};
-    $fs->{fat_size} = $fs->{fat_length} * $fs->{sector_size};
-    $fs->{root_dir_offset} = $fs->{fat_offset} + $fs->{fat_size} * $fs->{nb_fats};
-    $fs->{root_dir_size} = $fs->{nb_root_dir_entries} * resize_fat::directory::entry_size();
-    $fs->{cluster_offset} = $fs->{root_dir_offset} + $fs->{root_dir_size} - 2 * $fs->{cluster_size};
-
-    $fs->{nb_fat_entries} = divide($fs->{fat_size}, $fs->{fs_type_size} / 8);
-
-    #- - 2 because clusters 0 & 1 does not exist
-    $fs->{nb_clusters} = divide($fs->{nb_sectors} * $fs->{sector_size} - $fs->{cluster_offset}, $fs->{cluster_size}) - 2;
-
-    $fs->{dir_entries_per_cluster} = divide($fs->{cluster_size}, psizeof($format));
-
-#-    $fs->{nb_clusters} >= resize_fat::any::min_cluster_count($fs) or die "error: not enough sectors for a $fs->{fs_type}\n";
-    $fs->{nb_clusters} <  resize_fat::any::max_cluster_count($fs) or die "error: too many sectors for a $fs->{fs_type}\n";
-}
-
-sub write($) {
-    my ($fs) = @_;
-    my $boot = pack($format, @$fs{@fields});
-
-    eval { resize_fat::io::write($fs, 0, $SECTORSIZE, $boot) }; $@ and die "writing the boot sector failed on device $fs->{fs_name}";
-
-    if ($resize_fat::isFAT32) {
-	#- write backup
-	eval { resize_fat::io::write($fs, $fs->{fat32_backup_sector} * $SECTORSIZE, $SECTORSIZE, $boot) };
-	$@ and die "writing the backup boot sector (#$fs->{fat32_backup_sector}) failed on device $fs->{fs_name}";
-    }
-}
diff --git a/perl-install/resize_fat/c_rewritten.pm b/perl-install/resize_fat/c_rewritten.pm
deleted file mode 100644
index bc0548314..000000000
--- a/perl-install/resize_fat/c_rewritten.pm
+++ /dev/null
@@ -1,14 +0,0 @@
-package resize_fat::c_rewritten; # $Id$
-
-use strict;
-
-require DynaLoader;
-
-our @ISA = qw(DynaLoader Exporter);
-our $VERSION = '0.01';
-our @EXPORT_OK = qw(next set_next);
-
-resize_fat::c_rewritten->bootstrap($VERSION);
-
-1;
-
diff --git a/perl-install/resize_fat/c_rewritten.xs b/perl-install/resize_fat/c_rewritten.xs
deleted file mode 100644
index 2bca483c0..000000000
--- a/perl-install/resize_fat/c_rewritten.xs
+++ /dev/null
@@ -1,265 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-
-/* set by scan_fat, used by next */
-short *fat = NULL;
-char *fat_flag_map = NULL;
-unsigned int *fat_remap = NULL;
-int fat_remap_size;
-int type_size, nb_clusters, bad_cluster_value;
-
-void free_all() {
-#define FREE(p) if (p) free(p), p = NULL;
-  FREE(fat);
-  FREE(fat_flag_map);
-  FREE(fat_remap);
-#undef FREE
-}
-
-unsigned int next(unsigned int cluster) {
-  short *p = fat + type_size * cluster;
-  if (!fat) {
-    free_all();
-    croak("fat::next: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("fat::next: cluster %d outside filesystem", cluster);
-  }
-  return type_size == 1 ? *p : *((unsigned int *) p);
-}
-
-void set_next(unsigned int cluster, unsigned int val) {
-  short *p = fat + type_size * cluster;
-  if (!fat) {
-    free_all();
-    croak("fat::set_next: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("fat::set_next: cluster %d outside filesystem", cluster);
-  }
-  if (type_size == 1)
-    *p = val;
-  else
-    *((unsigned int *) p) = val;
-}
-
-MODULE = resize_fat::c_rewritten PACKAGE = resize_fat::c_rewritten
-
-PROTOTYPES: DISABLE
-
-
-void
-read_fat(fd, offset, size, magic)
-  int fd
-  int offset
-  int size
-  unsigned char magic
-  PPCODE:
-{
-  fat = (short *) malloc(size);
-  if (!fat) {
-    free_all();
-    croak("read_fat: not enough memory");
-  }
-  if (lseek(fd, offset, SEEK_SET) != offset ||
-      read(fd, fat, size) != size) {
-    free_all();
-    croak("read_fat: reading FAT failed");
-  }
-  if (magic != *(unsigned char *) fat) {
-    free_all();
-    croak("read_fat: FAT has invalid signature");
-  }
-}
-
-void
-write_fat(fd, size)
-  int fd
-  int size
-  PPCODE:
-{
-  if (write(fd, fat, size) != size) {
-    free_all();
-    croak("write_fat: write failed");
-  }
-}
-
-void
-free_all()
-  PPCODE:
-  free_all();
-
-void
-scan_fat(nb_clusters_, type_size_)
-  int nb_clusters_
-  int type_size_
-  PPCODE:
-{
-  unsigned int v;  
-  int free = 0, bad = 0, used = 0;
-  short *p;
-  
-  type_size = type_size_; nb_clusters = nb_clusters_;
-  bad_cluster_value = type_size == 32 ? 0x0ffffff7 : 0xfff7;
-
-  if (type_size % 16) {
-    free_all();
-    croak("scan_fat: unable to handle FAT%d", type_size);
-  }
-  type_size /= 16;
-
-  for (p = fat + 2 * type_size; p < fat + type_size * (nb_clusters + 2); p += type_size) {
-    v = type_size == 1 ? *p : *((unsigned int *) p);
-
-    if (v == 0) free++;
-    else if (v == bad_cluster_value) bad++;
-  }
-  used = nb_clusters - free - bad;
-  EXTEND(SP, 3);
-  PUSHs(sv_2mortal(newSViv(free)));
-  PUSHs(sv_2mortal(newSViv(bad)));
-  PUSHs(sv_2mortal(newSViv(used)));
-}
-
-unsigned int
-next(unused, cluster)
-  void *unused
-  unsigned int cluster
-  CODE:
-  RETVAL = next(cluster);
-  OUTPUT:
-  RETVAL
-
-void
-set_next(unused, cluster, val)
-  void *unused
-  unsigned int cluster
-  unsigned int val
-  CODE:
-  set_next(cluster, val);
-
-void
-allocate_fat_flag(size)
-  int size
-  CODE:
-  fat_flag_map = calloc(size, 1);
-  if (!fat_flag_map) {
-    free_all();
-    croak("allocate_fat_flag: not enough memory");
-  }
-
-int
-checkFat(cluster, type, name)
-  unsigned int cluster
-  int type
-  char *name
-  CODE:
-  int nb = 0;
-
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  for (; cluster < bad_cluster_value; cluster = next(cluster)) {
-    if (cluster == 0) {
-      free_all();
-      croak("Bad FAT: unterminated chain for %s\n", name);
-    }
-    if (cluster >= nb_clusters + 2) {
-      free_all();
-      croak("Bad FAT: chain outside filesystem for %s\n", name);
-    }
-    if (fat_flag_map[cluster]) {
-      free_all();
-      croak("Bad FAT: cluster %d is cross-linked for %s\n", cluster, name);
-    }
-    fat_flag_map[cluster] = type;
-    nb++;
-  }
-  RETVAL = nb;
-  OUTPUT:
-  RETVAL
-
-unsigned int
-flag(cluster)
-  unsigned int cluster
-  CODE:
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("Bad FAT: going outside filesystem");
-  }
-  RETVAL = fat_flag_map[cluster];
-  OUTPUT:
-  RETVAL
-
-void
-set_flag(cluster, flag)
-  unsigned int cluster
-  int flag
-  CODE:
-  if (!fat_flag_map) {
-    free_all();
-    croak("Bad FAT: trying to use null pointer");
-  }
-  if (cluster >= nb_clusters + 2) {
-    free_all();
-    croak("Bad FAT: going outside filesystem");
-  }
-  fat_flag_map[cluster] = flag;
-
-void
-allocate_fat_remap(size)
-  int size
-  CODE:
-  fat_remap_size = size;
-  fat_remap = (unsigned int *) calloc(size, sizeof(unsigned int *));
-  if (!fat_remap) {
-    free_all();
-    croak("allocate_fat_remap: not enough memory");
-  }
-
-unsigned int
-fat_remap(cluster)
-  unsigned int cluster
-  CODE:
-  if (!fat_remap) {
-    free_all();
-    croak("fat_remap: trying to use null pointer");
-  }
-  if (cluster >= bad_cluster_value) {
-    RETVAL = cluster; /* special cases */
-  } else {
-    if (cluster >= fat_remap_size) {
-      free_all();
-      croak("fat_remap: cluster %d >= %d in fat_remap", cluster, fat_remap_size);
-    }
-    RETVAL = fat_remap[cluster];
-  }
-  OUTPUT:
-  RETVAL
-
-void
-set_fat_remap(cluster, val)
-  unsigned int cluster
-  unsigned int val
-  CODE:
-  if (!fat_remap) {
-    free_all();
-    croak("set_fat_remap: trying to use null pointer");
-  }
-  if (cluster >= fat_remap_size) {
-    free_all();
-    croak("set_fat_remap: cluster %d >= %d in set_fat_remap", cluster, fat_remap_size);
-  }
-  if (val < bad_cluster_value && val >= fat_remap_size) {
-    free_all();
-    croak("set_fat_remap: remapping cluster %d to cluster %d >= %d in set_fat_remap", cluster, val, fat_remap_size);
-  }
-  fat_remap[cluster] = val;
diff --git a/perl-install/resize_fat/dir_entry.pm b/perl-install/resize_fat/dir_entry.pm
deleted file mode 100644
index 130bac7c8..000000000
--- a/perl-install/resize_fat/dir_entry.pm
+++ /dev/null
@@ -1,77 +0,0 @@
-package resize_fat::dir_entry; # $Id$
-
-use diagnostics;
-use strict;
-
-
-my $DELETED_FLAG      = 0xe5;
-
-my $_READ_ONLY_ATTR   = 0x01;
-my $HIDDEN_ATTR       = 0x02;
-my $SYSTEM_ATTR       = 0x04;
-my $VOLUME_LABEL_ATTR = 0x08;
-my $VFAT_ATTR         = 0x0f;
-my $DIRECTORY_ATTR    = 0x10;
-
-1;
-
-sub get_cluster($) {
-    my ($entry) = @_;
-    $entry->{first_cluster} + ($resize_fat::isFAT32 ? $entry->{first_cluster_high} * (1 << 16) : 0);
-}
-sub set_cluster($$) {
-    my ($entry, $val) = @_;
-    $entry->{first_cluster} = $val & ((1 << 16) - 1);
-    $entry->{first_cluster_high} = $val >> 16 if $resize_fat::isFAT32;
-}
-
-sub is_unmoveable($) {
-    my ($entry) = @_;
-    $entry->{attributes} & $HIDDEN_ATTR || $entry->{attributes} & $SYSTEM_ATTR;
-}
-
-sub is_directory($) {
-    my ($entry) = @_;
-    $entry->{attributes} & $DIRECTORY_ATTR && $entry->{name} !~ /^\.\.? / && !is_special_entry($entry);
-}
-
-sub is_volume($) {
-    my ($entry) = @_;
-    !is_special_entry($entry) && $entry->{attributes} & $VOLUME_LABEL_ATTR;
-}
-
-sub is_file($) {
-    my ($entry) = @_;
-    !is_special_entry($entry) && !is_directory($entry) && !is_volume($entry) && $entry->{length};
-}
-
-
-sub is_special_entry($) {
-    my ($entry) = @_;
-    my ($c) = unpack "C", $entry->{name};
-
-    #- skip empty slots, deleted files, and 0xF6?? (taken from kernel)
-    $c == 0 || $c == $DELETED_FLAG || $c == 0xF6 and return 1;
-
-    $entry->{attributes} == $VFAT_ATTR and return 1;
-    0;
-}
-
-
-#- return true if entry has been modified
-#- curr_dir_name is added to contains current directory name, "" for root.
-sub remap {
-    my ($_curr_dir_name, $entry) = @_;
-
-    is_special_entry($entry) and return;
-
-    my $cluster = get_cluster($entry);
-    my $new_cluster = resize_fat::c_rewritten::fat_remap($cluster);
-
-    #-print "remapping cluster ", get_cluster($entry), " to $new_cluster";
-
-    $new_cluster == $cluster and return; #- no need to modify
-
-    set_cluster($entry, $new_cluster);
-    1;
-}
diff --git a/perl-install/resize_fat/directory.pm b/perl-install/resize_fat/directory.pm
deleted file mode 100644
index 6f8ae9445..000000000
--- a/perl-install/resize_fat/directory.pm
+++ /dev/null
@@ -1,79 +0,0 @@
-package resize_fat::directory; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::dir_entry;
-use resize_fat::io;
-
-
-my $format = "a8 a3 C C C S7 I";
-my @fields = (
-    'name',
-    'extension',
-    'attributes',
-    'is_upper_case_name',
-    'creation_time_low',	#- milliseconds
-    'creation_time_high',
-    'creation_date',
-    'access_date',
-    'first_cluster_high',	#- for FAT32
-    'time',
-    'date',
-    'first_cluster',
-    'length',
-);
-my $psizeof_format = psizeof($format);
-
-1;
-
-sub entry_size() { $psizeof_format }
-
-#- call `f' for each entry of the directory
-#- if f return true, then modification in the entry are taken back
-sub traverse($$$) {
-    my ($directory, $curr_dir_name, $f) = @_;
-
-    for (my $i = 0;; $i++) {
-	my $raw = \substr($directory, $i * $psizeof_format, $psizeof_format);
-
-	#- empty entry means end of directory
-	$$raw =~ /^\0*$/ and return $directory;
-
-	my $entry; @$entry{@fields} = unpack $format, $$raw;
-
-	&$f($curr_dir_name, $entry)
-	    and	$$raw = pack $format, @$entry{@fields};
-    }
-    $directory;
-}
-
-sub traverse_all($$) {
-    my ($fs, $f) = @_;
-
-    my $traverse_all; $traverse_all = sub {
-	my ($curr_dir_name, $entry) = @_;
-
-	&$f($curr_dir_name, $entry);
-
-        resize_fat::dir_entry::is_directory($entry)
-	    and traverse(resize_fat::io::read_file($fs, resize_fat::dir_entry::get_cluster($entry)), "$curr_dir_name/$entry->{name}", $traverse_all);
-
-	undef; #- no need to write back (cf traverse)
-    };
-
-    my $directory = $resize_fat::isFAT32 ?
-	resize_fat::io::read_file($fs, $fs->{fat32_root_dir_cluster}) :
-	resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size});
-    traverse($directory, "", $traverse_all);
-    undef $traverse_all; #- circular reference is no good for perl's poor GC :(
-}
-
-
-#- function used by construct_dir_tree to translate the `cluster' fields in each
-#- directory entry
-sub remap($$) {
-    my ($_fs, $directory) = @_;
-    traverse($directory, "", \&resize_fat::dir_entry::remap);
-}
diff --git a/perl-install/resize_fat/fat.pm b/perl-install/resize_fat/fat.pm
deleted file mode 100644
index 2bceb129d..000000000
--- a/perl-install/resize_fat/fat.pm
+++ /dev/null
@@ -1,135 +0,0 @@
-package resize_fat::fat; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::any;
-use resize_fat::io;
-use resize_fat::c_rewritten qw(next set_next);
-
-sub read($) {
-    my ($fs) = @_;
-
-    resize_fat::c_rewritten::read_fat(fileno $fs->{fd}, $fs->{fat_offset}, $fs->{fat_size}, $fs->{media});
-
-    @{$fs->{clusters}{count}}{qw(free bad used)} =
-      resize_fat::c_rewritten::scan_fat($fs->{nb_clusters}, $fs->{fs_type_size});
-}
-
-sub write($) {
-    my ($fs) = @_;
-
-    sysseek $fs->{fd}, $fs->{fat_offset}, 0 or die "write_fat: seek failed";
-    foreach (1..$fs->{nb_fats}) {
-	resize_fat::c_rewritten::write_fat(fileno $fs->{fd}, $fs->{fat_size});
-    }
-}
-
-
-
-#- allocates where all the clusters will be moved to. Clusters before cut_point
-#- remain in the same position, however cluster that are part of a directory are
-#- moved regardless (this is a mechanism to prevent data loss) (cut_point is the
-#- first cluster that will not occur in the new fs)
-sub allocate_remap {
-    my ($fs, $cut_point) = @_;
-    my ($cluster, $new_cluster);
-    my $remap = sub { resize_fat::c_rewritten::set_fat_remap($cluster, $new_cluster) };
-    my $get_new = sub {
-	$new_cluster = get_free($fs);
-	0 < $new_cluster && $new_cluster < $cut_point or die "no free clusters";
-	set_eof($fs, $new_cluster); #- mark as used
-	#-log::ld("resize_fat: [$cluster,", &next($fs, $cluster), "...]->$new_cluster...");
-    };
-
-    #- this must call allocate_fat_remap that zeroes the buffer allocated.
-    resize_fat::c_rewritten::allocate_fat_remap($fs->{nb_clusters} + 2);
-
-    $fs->{last_free_cluster} = 2;
-    for ($cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	if ($cluster < $cut_point) {
-	    if (resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY) {
-		&$get_new();
-	    } else {
-		$new_cluster = $cluster;
-	    }
-	    &$remap();
-	} elsif (!is_empty(&next($fs, $cluster))) {
-	    &$get_new();
-	    &$remap();
-	 }
-    }
-}
-
-
-#- updates the fat for the resized filesystem
-sub update {
-    my ($fs) = @_;
-
-    for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	 if (resize_fat::c_rewritten::flag($cluster)) {
-	     my $old_next = &next($fs, $cluster);
-	     my $new      = resize_fat::c_rewritten::fat_remap($cluster);
-	     my $new_next = resize_fat::c_rewritten::fat_remap($old_next);
-
-	     set_available($fs, $cluster);
-
-	     is_eof($old_next) ?
-		 set_eof($fs, $new) :
-		 set_next($fs, $new, $new_next);
-	 }
-    }
-}
-
-
-sub endianness16($) { (($_[0] & 0xff) << 8) + ($_[0] >> 8) }
-sub endianness($$) {
-    my ($val, $nb_bits) = @_;
-    my $r = 0;
-    for (; $nb_bits > 0; $nb_bits -= 8) {
-	$r = $r << 8;
-	$r += $val & 0xff;
-	$val = $val >> 8;
-    }
-    $nb_bits < 0 and die "error: endianness only handle numbers divisible by 8";
-    $r;
-}
-
-
-
-sub get_free($) {
-    my ($fs) = @_;
-    for (my $i = 0; $i < $fs->{nb_clusters}; $i++) {
-        my $cluster = ($i + $fs->{last_free_cluster} - 2) % $fs->{nb_clusters} + 2;
-        is_available(&next($fs, $cluster)) and return $fs->{last_free_cluster} = $cluster;
-    }
-    die "no free clusters";
-}
-
-#-    returns true if <cluster> represents an EOF marker
-sub is_eof($) {
-    my ($cluster) = @_;
-    $cluster >= $resize_fat::bad_cluster_value;
-}
-sub set_eof($$) {
-    my ($fs, $cluster) = @_;
-    set_next($fs, $cluster, $resize_fat::bad_cluster_value + 1);
-}
-
-#-    returns true if <cluster> is empty.  Note that this includes bad clusters.
-sub is_empty($) {
-    my ($cluster) = @_;
-    $cluster == 0 || $cluster == $resize_fat::bad_cluster_value;
-}
-
-#-    returns true if <cluster> is available.
-sub is_available($) {
-    my ($cluster) = @_;
-    $cluster == 0;
-}
-sub set_available($$) {
-    my ($fs, $cluster) = @_;
-    set_next($fs, $cluster, 0);
-}
-
-1;
diff --git a/perl-install/resize_fat/info_sector.pm b/perl-install/resize_fat/info_sector.pm
deleted file mode 100644
index 11aa7f153..000000000
--- a/perl-install/resize_fat/info_sector.pm
+++ /dev/null
@@ -1,37 +0,0 @@
-package resize_fat::info_sector; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use resize_fat::io;
-
-#- Oops, this will be unresizable on big-endian machine. trapped by signature.
-my $format = "a484 I I I a16";
-my @fields = (
-    'unused',
-    'signature',		#- should be 0x61417272
-    'free_clusters',		#- -1 for unknown
-    'next_cluster',		#- most recently allocated cluster
-    'unused2',
-);
-
-1;
-
-
-sub read($) {
-    my ($fs) = @_;
-    my $info = resize_fat::io::read($fs, $fs->{info_offset}, psizeof($format));
-    @{$fs->{info_sector}}{@fields} = unpack $format, $info;
-    $fs->{info_sector}{signature} == 0x61417272 or die "Invalid information sector signature\n";
-}
-
-sub write($) {
-    my ($fs) = @_;
-    $fs->{info_sector}{free_clusters} = $fs->{clusters}{count}{free};
-    $fs->{info_sector}{next_cluster} = 2;
-
-    my $info = pack $format, @{$fs->{info_sector}}{@fields};
-
-    resize_fat::io::write($fs, $fs->{info_offset}, psizeof($format), $info);
-}
diff --git a/perl-install/resize_fat/io.pm b/perl-install/resize_fat/io.pm
deleted file mode 100644
index 020cb61f5..000000000
--- a/perl-install/resize_fat/io.pm
+++ /dev/null
@@ -1,58 +0,0 @@
-package resize_fat::io; # $Id$
-
-use diagnostics;
-use strict;
-
-use resize_fat::fat;
-use c;
-
-1;
-
-
-sub read($$$) {
-    my ($fs, $pos, $size) = @_;
-    my $buf = "\0" x $size;
-    sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    sysread $fs->{fd}, $buf, $size or die "reading at byte #$pos failed on device $fs->{fs_name}";
-    $buf;
-}
-sub write($$$$) {
-    my ($fs, $pos, $_size, $buf) = @_;
-    sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf or die "writing at byte #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_cluster($$) {
-    my ($fs, $cluster) = @_;
-    my $buf;
-    my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
-    c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
-    sysread $fs->{fd}, $buf, $fs->{cluster_size} or die "reading at sector #$pos failed on device $fs->{fs_name}";
-    $buf;
-}
-sub write_cluster($$$) {
-    my ($fs, $cluster, $buf) = @_;
-    my $pos = $fs->{cluster_offset} / 512 + $cluster * ($fs->{cluster_size} / 512);
-
-    c::lseek_sector(fileno $fs->{fd}, $pos, 0) or die "seeking to sector #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf or die "writing at sector #$pos failed on device $fs->{fs_name}";
-}
-
-sub read_file($$) {
-    my ($fs, $cluster) = @_;
-    my $buf = '';
-
-    for (; !resize_fat::fat::is_eof($cluster); $cluster = resize_fat::fat::next($fs, $cluster)) {
-	$cluster == 0 and die "Bad FAT: unterminated chain\n";
-	$buf .= read_cluster($fs, $cluster);
-    }
-    $buf;
-}
-
-sub open {
-    my ($fs) = @_;
-
-    sysopen $fs->{fd}, $fs->{fs_name}, 2 or
-      sysopen $fs->{fd}, $fs->{fs_name}, 0 or die "error opening device $fs->{fs_name} for writing\n";
-}
diff --git a/perl-install/resize_fat/main.pm b/perl-install/resize_fat/main.pm
deleted file mode 100644
index 726875837..000000000
--- a/perl-install/resize_fat/main.pm
+++ /dev/null
@@ -1,167 +0,0 @@
-package resize_fat::main; # $Id$
-
-# This is mainly a perl rewrite of the work of Andrew Clausen (libresize)
-
-use diagnostics;
-use strict;
-
-use log;
-use common;
-use MDK::Common::System;
-use resize_fat::boot_sector;
-use resize_fat::info_sector;
-use resize_fat::directory;
-use resize_fat::io;
-use resize_fat::fat;
-use resize_fat::any;
-
-
-1;
-
-#- - reads in the boot sector/partition info., and tries to make some sense of it
-sub new($$$) {
-    my ($type, $device, $fs_name) = @_;
-    my $fs = { device => $device, fs_name => $fs_name };
-
-    eval {
-	resize_fat::io::open($fs);
-	resize_fat::boot_sector::read($fs);
-	$resize_fat::isFAT32 and eval { resize_fat::info_sector::read($fs) };
-	resize_fat::fat::read($fs);
-	resize_fat::any::flag_clusters($fs);
-    };
-    if ($@) {
-	close $fs->{fd};
-	die;
-    }
-    bless $fs, $type;
-}
-
-sub DESTROY {
-    my ($fs) = @_;
-    close $fs->{fd};
-    resize_fat::c_rewritten::free_all();
-}
-
-#- copy all clusters >= <start_cluster> to a new place on the partition, less
-#- than <start_cluster>. Only copies files, not directories.
-#- (use of buffer needed because the seeks slow like hell the hard drive)
-sub copy_clusters {
-    my ($fs, $cluster) = @_;
-    my @buffer;
-    my $flush = sub {
-	while (@buffer) {
-	    my $cluster = shift @buffer;
-	    resize_fat::io::write_cluster($fs, $cluster, shift @buffer);
-	}
-    };
-    for (; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::FILE or next;
-	push @buffer, 
-	  resize_fat::c_rewritten::fat_remap($cluster), 
-	  resize_fat::io::read_cluster($fs, $cluster);
-	@buffer > 50 and &$flush();
-    }
-    &$flush();
-}
-
-#- Constructs the new directory tree to match the new file locations.
-sub construct_dir_tree {
-    my ($fs) = @_;
-
-    if ($resize_fat::isFAT32) {
-	#- fat32's root must remain in the first 64k clusters
-	#- so do not set it as DIRECTORY, it will be specially handled
-	resize_fat::c_rewritten::set_flag($fs->{fat32_root_dir_cluster}, $resize_fat::any::FREE);
-    }
-
-    for (my $cluster = 2; $cluster < $fs->{nb_clusters} + 2; $cluster++) {
-	resize_fat::c_rewritten::flag($cluster) == $resize_fat::any::DIRECTORY or next;
-
-      resize_fat::io::write_cluster($fs,
-				    resize_fat::c_rewritten::fat_remap($cluster),
-				    resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
-    }
-
-    MDK::Common::System::sync();
-
-    #- until now, only free clusters have been written. it's a null operation if we stop here.
-    #- it means no corruption :)
-    #
-    #- now we must be as fast as possible!
-
-    #- remapping non movable root directory
-    if ($resize_fat::isFAT32) {
-	my $cluster = $fs->{fat32_root_dir_cluster};
-
-	resize_fat::io::write_cluster($fs,
-		      resize_fat::c_rewritten::fat_remap($cluster),
-		      resize_fat::directory::remap($fs, resize_fat::io::read_cluster($fs, $cluster)));
-    } else {
-	resize_fat::io::write($fs, $fs->{root_dir_offset}, $fs->{root_dir_size},
-			      resize_fat::directory::remap($fs, resize_fat::io::read($fs, $fs->{root_dir_offset}, $fs->{root_dir_size})));
-    }
-}
-
-sub min_size($) { &resize_fat::any::min_size }
-sub max_size($) { &resize_fat::any::max_size }
-sub used_size($) { &resize_fat::any::used_size }
-
-#- resize
-#- - size is in sectors
-#- - checks boundaries before starting
-#- - copies all data beyond new_cluster_count behind the frontier
-sub resize {
-    my ($fs, $size) = @_;
-
-    my ($min, $max) = (min_size($fs), max_size($fs));
-
-    $size += $min if $size =~ /^\+/;
-
-    $size >= $min or die "Minimum filesystem size is $min sectors";
-    $size <= $max or die "Maximum filesystem size is $max sectors";
-
-    log::l("resize_fat: Partition size will be " . (($size * $SECTORSIZE) >> 20) . "Mb (well exactly ${size} sectors)");
-
-    my $new_data_size = $size * $SECTORSIZE - $fs->{cluster_offset};
-    my $new_nb_clusters = divide($new_data_size, $fs->{cluster_size});
-    my $used_size = used_size($fs);
-
-    log::l("resize_fat: Break point for moving files is " . (($used_size * $SECTORSIZE) >> 20) . " Mb ($used_size sectors)");
-    if ($size < $used_size) {
-	log::l("resize_fat: Allocating new clusters");
-	resize_fat::fat::allocate_remap($fs, $new_nb_clusters);
-
-	log::l("resize_fat: Copying files");
-	copy_clusters($fs, $new_nb_clusters);
-
-	log::l("resize_fat: Copying directories");
-	construct_dir_tree($fs);
-
-	log::l("Writing new FAT...");
-	resize_fat::fat::update($fs);
-	resize_fat::fat::write($fs);
-    } else {
-	log::l("resize_fat: Nothing need to be moved");
-    }
-
-    $fs->{nb_sectors} = $size;
-    $fs->{nb_clusters} = $new_nb_clusters;
-    $fs->{clusters}{count}{free} =
-      $fs->{nb_clusters} - $fs->{clusters}{count}{used} - $fs->{clusters}{count}{bad} - 2;
-
-    $fs->{system_id} = 'was here!';
-    $fs->{small_nb_sectors} = 0;
-    $fs->{big_nb_sectors} = $size;
-
-    log::l("resize_fat: Writing new boot sector...");
-
-    resize_fat::boot_sector::write($fs);
-
-    $resize_fat::isFAT32 and eval { resize_fat::info_sector::write($fs) }; #- does not matter if this fails - its pretty useless!
-
-    MDK::Common::System::sync();
-    close $fs->{fd};
-    log::l("resize_fat: done");
-}
-
diff --git a/perl-install/run_program.pm b/perl-install/run_program.pm
deleted file mode 100644
index 26b73a2d0..000000000
--- a/perl-install/run_program.pm
+++ /dev/null
@@ -1,157 +0,0 @@
-package run_program; # $Id$
-
-use diagnostics;
-use strict;
-use c;
-
-use MDK::Common;
-use log;
-
-1;
-
-sub run_or_die {
-    my ($name, @args) = @_;
-    run($name, @args) or die "$name failed\n";
-}
-sub rooted_or_die {
-    my ($root, $name, @args) = @_;
-    rooted($root, $name, @args) or die "$name failed\n";
-}
-
-sub get_stdout {
-    my ($name, @args) = @_;
-    my @r;
-    run($name, '>', \@r, @args) or return;
-    wantarray() ? @r : join('', @r);
-}
-sub rooted_get_stdout {
-    my ($root, $name, @args) = @_;
-    my @r;
-    rooted($root, $name, '>', \@r, @args) or return;
-    wantarray() ? @r : join('', @r);
-}
-
-sub run { raw({}, @_) }
-
-sub rooted {
-    my ($root, $name, @args) = @_;
-    raw({ root => $root }, $name, @args);
-}
-
-sub raw {
-    my ($options, $name, @args) = @_;
-    my $root = $options->{root} || '';
-    my $real_name = ref($name) ? $name->[0] : $name;
-
-    my ($stdout_raw, $stdout_mode, $stderr_raw, $stderr_mode);
-    ($stdout_mode, $stdout_raw, @args) = @args if $args[0] =~ /^>>?$/;
-    ($stderr_mode, $stderr_raw, @args) = @args if $args[0] =~ /^2>>?$/;
-
-    my $args = $options->{sensitive_arguments} ? '<hidden arguments>' : join(' ', @args);
-    log::explanations("running: $real_name $args" . ($root ? " with root $root" : ""));
-
-    return if $root && $<;
-
-    $root ? ($root .= '/') : ($root = '');
-    
-    $ENV{HOME} || $::isInstall or $ENV{HOME} = '/root';
-    my $tmpdir = sub {
-	my $dir = "$ENV{HOME}/tmp";
-	-d $dir or mkdir($dir, 0700);
-	$dir;
-    };
-    my $stdout = $stdout_raw && (ref($stdout_raw) ? $tmpdir->() . "/.drakx-stdout.$$" : "$root$stdout_raw");
-    my $stderr = $stderr_raw && (ref($stderr_raw) ? $tmpdir->() . "/.drakx-stderr.$$" : "$root$stderr_raw");
-
-    if (my $pid = fork()) {
-	if ($options->{detach}) {
-	    $pid;
-	} else {
-	    my $ok;
-	    eval {
-		local $SIG{ALRM} = sub { die "ALARM" };
-		alarm($options->{timeout} || 10 * 60);
-		waitpid $pid, 0;
-		$ok = $? == 0;
-		alarm 0;
-	    };
-	    if ($@) {
-		log::l("ERROR: killing runaway process (process=$real_name, pid=$pid, args=@args, error=$@)");
-		kill 9, $pid;
-		return;
-	    }
-
-	    if ($stdout_raw && ref($stdout_raw)) {	    
-		if (ref($stdout_raw) eq 'ARRAY') { 
-		    @$stdout_raw = cat_($stdout);
-		} else { 
-		    $$stdout_raw = cat_($stdout);
-		}
-		unlink $stdout;
-	    }
-	    if ($stderr_raw && ref($stderr_raw)) {
-		if (ref($stderr_raw) eq 'ARRAY') { 
-		    @$stderr_raw = cat_($stderr);
-		} else { 
-		    $$stderr_raw = cat_($stderr);
-		}
-		unlink $stderr;
-	    }
-	    $ok;
-	}
-    } else {
-	sub die_exit {
-	    log::l($_[0]);
-	    c::_exit(128);
-	}
-	if ($stderr && $stderr eq 'STDERR') {
-	} elsif ($stderr) {
-	    $stderr_mode =~ s/2//;
-	    open STDERR, "$stderr_mode $stderr" or die_exit("run_program can not output in $stderr (mode `$stderr_mode')");
-	} elsif ($::isInstall) {
-	    open STDERR, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die_exit("run_program can not log, give me access to /tmp/ddebug.log");
-	}
-	if ($stdout && $stdout eq 'STDOUT') {
-	} elsif ($stdout) {
-	    open STDOUT, "$stdout_mode $stdout" or die_exit("run_program can not output in $stdout (mode `$stdout_mode')");
-	} elsif ($::isInstall) {
-	    open STDOUT, ">> /tmp/ddebug.log" or open STDOUT, ">> /dev/tty7" or die_exit("run_program can not log, give me access to /tmp/ddebug.log");
-	}
-
-	$root and chroot $root;
-	chdir "/";
-
-	my $ok = ref $name ? do {
-	    exec { $name->[0] } $name->[1], @args;
-	} : do {
-	    exec $name, @args;
-	};
-	if (!$ok) {
-	    die_exit("exec of $real_name failed: $!");
-	}
-    }
-
-}
-
-# run in background a sub that give back data through STDOUT a la run_program::get_stdout but w/ arbitrary perl code instead of external program
-package bg_command;
-
-sub new {
-    my ($class, $sub) = @_;
-    my $o = bless {}, $class;
-    if ($o->{pid} = open(my $fd, "-|")) {
-        $o->{fd} = $fd;
-        $o;
-    } else {
-        $sub->();
-        c::_exit(0);
-    }
-}
-
-sub DESTROY {
-    my ($o) = @_;
-    close $o->{fd} or warn "kid exited $?";
-    waitpid $o->{pid}, 0;
-}
-
-1;
diff --git a/perl-install/sbus_probing/main.pm b/perl-install/sbus_probing/main.pm
deleted file mode 100644
index 1bd20fe30..000000000
--- a/perl-install/sbus_probing/main.pm
+++ /dev/null
@@ -1,138 +0,0 @@
-package sbus_probing::main; # $Id$
-
-use c;
-use log;
-use common;
-use modules;
-
-my %sbus_table_network = (
-			  hme    => [ "Sun Happy Meal Ethernet", "sunhme" ],
-			  le     => [ "Sun Lance Ethernet", "ignore:lance" ],
-			  qe     => [ "Sun Quad Ethernet", "sunqe" ],
-			  mlanai => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
-			  myri   => [ "MyriCOM MyriNET Gigabit Ethernet", "myri_sbus" ],
-			 );
-my %sbus_table_scsi =    (
-			  soc   => [ "Sun SPARCStorage Array", "fc4:soc:pluto" ],
-			  socal => [ "Sun Enterprise Network Array", "fc4:socal:fcal" ],
-			  esp   => [ "Sun Enhanced SCSI Processor (ESP)", "ignore:esp" ],
-			  fas   => [ "Sun Swift (ESP)", "ignore:esp" ],
-			  ptisp => [ "Performance Technologies ISP", "qlogicpti" ],
-			  isp   => [ "QLogic ISP", "qlogicpti" ],
-			 );
-my %sbus_table_audio =   (
-			  audio      => [ "AMD7930", "amd7930" ],
-			  CS4231     => [ "CS4231 APC DMA (SBUS)", "cs4231" ],
-			  CS4231_PCI => [ "CS4231 EB2 DMA (PCI)", "cs4231" ],
-			 );
-my %sbus_table_video =   (
-			  bwtwo         => [ "Sun|Monochrome (bwtwo)", "Server:SunMono" ],
-			  cgthree       => [ "Sun|Color3 (cgthree)", "Server:Sun" ],
-			  cgeight       => [ "Sun|CG8/RasterOps", "Server:Sun" ],
-			  cgtwelve      => [ "Sun|GS (cgtwelve)", "Server:Sun24" ],
-			  gt            => [ "Sun|Graphics Tower", "Server:Sun24" ],
-			  mgx           => [ "Sun|Quantum 3D MGXplus", "Server:Sun24" ],
-			  mgx_4M        => [ "Sun|Quantum 3D MGXplus with 4M VRAM", "Server:Sun24" ],
-			  cgsix         => [ "Sun|Unknown GX", "Server:Sun" ],
-			  cgsix_dbl     => [ "Sun|Double Width GX", "Server:Sun" ],
-			  cgsix_sgl     => [ "Sun|Single Width GX", "Server:Sun" ],
-			  cgsix_t1M     => [ "Sun|Turbo GX with 1M VSIMM", "Server:Sun" ],
-			  cgsix_tp      => [ "Sun|Turbo GX Plus", "Server:Sun" ],
-			  cgsix_t       => [ "Sun|Turbo GX", "Server:Sun" ],
-			  cgfourteen    => [ "Sun|SX", "Server:Sun24" ],
-			  cgfourteen_4M => [ "Sun|SX with 4M VSIMM", "Server:Sun24" ],
-			  cgfourteen_8M => [ "Sun|SX with 8M VSIMM", "Server:Sun24" ],
-			  leo           => [ "Sun|ZX or Turbo ZX", "Server:Sun24" ],
-			  leo_t         => [ "Sun|Turbo ZX", "Server:Sun24" ],
-			  tcx           => [ "Sun|TCX (S24)", "Server:Sun24" ],
-			  tcx_8b        => [ "Sun|TCX (8bit)", "Server:Sun" ],
-			  afb           => [ "Sun|Elite3D", "Server:Sun24" ],
-			  afb_btx03     => [ "Sun|Elite3D-M6 Horizontal", "Server:Sun24" ],
-			  ffb           => [ "Sun|FFB", "Server:Sun24" ],
-			  ffb_btx08     => [ "Sun|FFB 67Mhz Creator", "Server:Sun24" ],
-			  ffb_btx0b     => [ "Sun|FFB 67Mhz Creator 3D", "Server:Sun24" ],
-			  ffb_btx1b     => [ "Sun|FFB 75Mhz Creator 3D", "Server:Sun24" ],
-			  ffb_btx20     => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
-			  ffb_btx28     => [ "Sun|FFB2 Vertical Creator", "Server:Sun24" ],
-			  ffb_btx23     => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx2b     => [ "Sun|FFB2 Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx30     => [ "Sun|FFB2+ Vertical Creator", "Server:Sun24" ],
-			  ffb_btx33     => [ "Sun|FFB2+ Vertical Creator 3D", "Server:Sun24" ],
-			  ffb_btx40     => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
-			  ffb_btx48     => [ "Sun|FFB2 Horizontal Creator", "Server:Sun24" ],
-			  ffb_btx43     => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
-			  ffb_btx4b     => [ "Sun|FFB2 Horizontal Creator 3D", "Server:Sun24" ],
-			 );
-
-1;
-
-sub prom_getint { unpack "I", c::prom_getproperty($_[0]) }
-
-#- update $@sbus_probed according to SBUS detection.
-sub prom_walk {
-    my ($sbus_probed, $node, $sbus, $ebus) = @_;
-    my ($prob_name, $prob_type) = (c::prom_getstring("name"), c::prom_getstring("device_type"));
-    my ($nextnode, $nsbus, $nebus) = (undef, $sbus, $ebus);
-
-    #- probe for network devices.
-    if ($sbus && $prob_type eq 'network') {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	$sbus_table_network{$prob_name} and push @$sbus_probed, [ "NETWORK", @{$sbus_table_network{$prob_name}} ];
-	#- TODO for Sun Quad Ethernet (qe)
-    }
-
-    #- probe for scsi devices.
-    if ($sbus && ($prob_type eq 'scsi' || $prob_name =~ /^(soc|socal)$/)) {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	$sbus_table_scsi{$prob_name} and push @$sbus_probed, [ "SCSI", @{$sbus_table_scsi{$prob_name}} ];
-    }
-
-    #- probe for audio devices, there are no type to check here.
-    if ($sbus_table_audio{$prob_name}) {
-	$prob_name =~ /,/ and $prob_name =~ s/[A-Z,]*(.*)/$1/;
-	my $ext = $prob_name eq 'CS4231' && $ebus && "_PCI";
-	$sbus_table_audio{$prob_name . $ext} ?
-	    push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name . $ext}} ] :
-	    push @$sbus_probed, [ "AUDIO", @{$sbus_table_audio{$prob_name}} ];
-    }
-
-    #- probe for video devices.
-    if ($prob_type eq 'display' && ($sbus || $prob_name =~ /^(ffb|afb|cgfourteen)$/)) {
-	$prob_name =~ s/[A-Z,]*(.*)/$1/;
-	my $ext = ($prob_name eq 'mgx' && prom_getint('fb_size') == 0x400000 && '_4M' ||
-		   $prob_name eq 'cgsix' && do {
-		       my ($chiprev, $vmsize) = (prom_getint('chiprev'), prom_getint('vmsize'));
-		       my $result = '';
-		       $chiprev >= 1 && $chiprev <= 4 and $result = '_dbl';
-		       $chiprev >= 5 && $chiprev <= 9 and $result = '_sgl';
-		       $chiprev == 11 && $vmsize == 2 and $result = '_t1M';
-		       $chiprev == 11 && $vmsize == 4 and $result = '_tp';
-		       $chiprev == 11 && !$result and $result = '_t';
-		       $result;
-		   } ||
-		   $prob_name eq 'leo' && c::prom_getstring('model') =~ /501-2503/ && '_t' ||
-		   $prob_name eq 'tcx' && c::prom_getbool('tcx-8-bit') && '_8b' ||
-		   $prob_name eq 'afb' && sprintf "_btx%x", prom_getint('board_type') ||
-		   $prob_name eq 'ffb' && sprintf "_btx%x", prom_getint('board_type'));
-
-	$sbus_table_video{$prob_name . $ext} ?
-	    push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name . $ext}} ] :
-	    push @$sbus_probed, [ "VIDEO", @{$sbus_table_video{$prob_name}} ];
-    }
-
-    #- parse prom tree.
-    $prob_name eq 'sbus' || $prob_name eq 'sbi' and $nsbus = 1;
-    $prob_name eq 'ebus' and $nebus = 1;
-    $nextnode = c::prom_getchild($node) and prom_walk($sbus_probed, $nextnode, $nsbus, $nebus);
-    $nextnode = c::prom_getsibling($node) and prom_walk($sbus_probed, $nextnode, $sbus, $ebus);
-}
-
-sub probe() {
-    eval { modules::load("openprom") } if arch() =~ /sparc/;
-    my $root_node = c::prom_open() or return;
-    my @l;
-
-    prom_walk(\@l, $root_node, 0, 0);
-    c::prom_close();
-    map { my %l; @l{qw(type description drivers)} = @$_; \%l } @l;
-}
diff --git a/perl-install/scanner.pm b/perl-install/scanner.pm
deleted file mode 100755
index b85d6e440..000000000
--- a/perl-install/scanner.pm
+++ /dev/null
@@ -1,624 +0,0 @@
-package scanner;
-# scanner.pm $Id$
-# Yves Duret <yduret at mandriva.com>
-# Till Kamppeter <till at mandriva.com>
-# Copyright (C) 2001-2004 Mandriva
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# pbs/TODO:
-# - scsi mis-configuration (should work better now)
-# - devfs use dev_is_devfs()
-# - with 2 scanners same manufacturer -> will overwrite previous conf -> only 1 conf !! (should work now)
-# - lp: see printerdrake
-# - install: prefix --> done (partially)
-
-use common;
-use detect_devices;
-use log;
-use handle_configs;
-
-my $sanedir = "$::prefix/etc/sane.d";
-my $scannerDBdir = "$::prefix$ENV{SHARE_PATH}/ldetect-lst";
-our $scannerDB = readScannerDB("$scannerDBdir/ScannerDB");
-
-sub confScanner {
-    my ($model, $port, $vendor, $product, $firmware) = @_;
-    $port ||= detect_devices::dev_is_devfs() ? "$::prefix/dev/usb/scanner0" : "$::prefix/dev/scanner";
-    my $a = $scannerDB->{$model}{server};
-    #print "file:[$a]\t[$model]\t[$port]\n| ", (join "\n| ", @{$scannerDB->{$model}{lines}}),"\n";
-    my @driverconf = cat_("$sanedir/$a.conf");
-    my @configlines = @{$scannerDB->{$model}{lines}};
-    foreach my $line (@configlines) {
-	$line =~ s/\$DEVICE/$port/g if $port;
-	next if $line =~ /\$DEVICE/;
-	$line =~ s/\$VENDOR/$vendor/g if $vendor;
-	next if $line =~ /\$VENDOR/;
-	$line =~ s/\$PRODUCT/$product/g if $product;
-	next if $line =~ /\$PRODUCT/;
-	$line =~ s/\$FIRMWARE/$firmware/g if $firmware;
-	next if $line =~ /\$FIRMWARE/;
-	my $linetype;
-	if ($line =~ /^(\S*)LINE\s+(.*?)$/) {
-	    $linetype = $1;
-	    $line = $2;
-	}
-	next if !$line;
-	if (!$linetype ||
-	    ($linetype eq "USB" && ($port =~ /usb/i || $vendor)) ||
-	    ($linetype eq "PARPORT" && !$vendor &&
-	     $port =~ /(parport|pt_drv|parallel)/i) ||
-	    ($linetype eq "SCSI" && !$vendor &&
-	     $port =~ m!(/sg|scsi|/scanner)!i)) {
-	    handle_configs::set_directive(\@driverconf, $line, 1);
-	} elsif ($linetype eq "FIRMWARE" && $firmware) {
-	    handle_configs::set_directive(\@driverconf, $line, 0);
-	}
-    }
-    output("$sanedir/$a.conf", @driverconf);
-    add2dll($a);
-}
-
-sub add2dll {
-    return if member($_[0], chomp_(cat_("$sanedir/dll.conf")));
-    my @dllconf = cat_("$sanedir/dll.conf");
-    handle_configs::add_directive(\@dllconf, $_[0]);
-    output("$sanedir/dll.conf", @dllconf);
-}
-
-sub setfirmware {
-    my ($backend, $firmwareline) = @_;
-    my @driverconf = cat_("$sanedir/$backend.conf");
-    handle_configs::set_directive(\@driverconf, $firmwareline, 0);
-    output("$sanedir/$backend.conf", @driverconf);
-}
-
-sub installfirmware {
-    # Install the firmware file in /usr/share/sane/firmware
-    my ($firmware, $backend) = @_;
-    return "" if !$firmware;
-    # Install firmware
-    run_program::rooted($::prefix, "mkdir", "-p",
-			"/usr/share/sane/firmware") || do {
-			    $in->ask_warn('Scannerdrake',
-					  N("Could not create directory /usr/share/sane/firmware!"));
-			    return "";
-			};
-    # Link /usr/share/sane/firmware to /usr/share/sane/<backend name> as
-    # some backends ignore the supplied absolute path to the firmware file
-    # and always search their own directory
-    if ($backend) {
-	run_program::rooted($::prefix, "ln", "-sf",
-			    "/usr/share/sane/firmware",
-			    "/usr/share/sane/$backend") || do {
-				$in->ask_warn('Scannerdrake',
-					      N("Could not create link /usr/share/sane/%s!", $backend));
-				return "";
-			    };
-    }
-    run_program::rooted($::prefix, "cp", "-f", "$firmware",
-			"/usr/share/sane/firmware") || do {
-			    $in->ask_warn('Scannerdrake',
-					  N("Could not copy firmware file %s to /usr/share/sane/firmware!", $firmware));
-			    return "";
-			};
-    $firmware =~ s!^(.*)(/[^/]+)$!/usr/share/sane/firmware$2!;
-    run_program::rooted($::prefix, "chmod", "644",
-			$firmware) || do {
-			    $in->ask_warn('Scannerdrake',
-					  N("Could not set permissions of firmware file %s!", $firmware));
-			    return "";
-			};
-    return $firmware;
-}
-
-sub configured() {
-    my @res;
-    my $parportscannerfound = 0;
-    # Run "scanimage -L", to find the scanners which are already working
-    local *LIST;
-    open LIST, "LC_ALL=C scanimage -L |";
-    while (my $line = <LIST>) {
-	if ($line =~ /^\s*device\s*`([^`']+)'\s+is\s+a\s+(\S.*)$/) {
-	    # Extract port and description
-	    my $port = $1;
-	    my $description = $2;
-	    # Remove duplicate scanners appearing through saned and the
-	    # "net" backend
-	    next if $port =~ /^net:(localhost|127.0.0.1):/;
-	    # Is the scanner hooked to a parallel or serial port?
-	    if ($port =~ /(parport|pt_drv|parallel|ttys)/i) {
-		$parportscannerfound = 1;
-	    }
-	    # Determine which SANE backend the scanner in question uses
-	    $port =~ /^([^:]+):/;
-	    my $backend = $1;
-	    # Does the scanner need a firmware file
-	    my $firmwareline = firmwareline($backend);
-	    # Store collected data
-	    push @res, { 
-		port => $port, 
-		val => { 
-		    DESCRIPTION => $description,
-		    ($backend ? ( BACKEND => $backend ) : ()),
-		    ($firmwareline ? 
-		     ( FIRMWARELINE => $firmwareline ) : ()),
-		}
-	    }
-	}
-    }
-    close LIST;
-    # We have a parallel port scanner, make it working for non-root users
-    nonroot_access_for_parport($parportscannerfound);
-    return @res;
-}
-
-sub nonroot_access_for_parport {
-
-    # This function configures a non-root access for parallel port
-    # scanners by running saned as root, exporting the scanner to
-    # localhost and letting the user's frontend use the "net" backend
-    # to access the scanner through the loopback network device.
-
-    # See also
-    # http://www.linuxprinting.org/download/digitalimage/Scanning-as-Normal-User-on-Wierd-Scanner-Mini-HOWTO.txt
-
-    # Desired state of this facility: 1: Enable, 0: Disable
-    my ($enable) = @_;
-    # Is saned running?
-    my $sanedrunning = services::starts_on_boot("saned");
-    # Is the "net" SANE backend active
-    my $netbackendactive = grep { /^\s*net\s*$/ }
-      cat_("/etc/sane.d/dll.conf");
-    # Set this to 1 to tell the caller that the list of locally available
-    # scanners has changed (Here if the SANE client configuration has
-    # changed)
-    my $changed = 0;
-    my $importschanged = 0;
-    if ($enable) {
-	# Enable non-root access
-	
-	# Install/start saned
-	if (!$sanedrunning) {
-	    # Make sure saned and xinetd is installed and 
-	    # running
-	    if (!files_exist('/usr/sbin/xinetd',
-			     '/usr/sbin/saned')) {
-		if (!$in->do_pkgs->install('xinetd', 'saned')) {
-		    $in->ask_warn(N("Scannerdrake"),
-				  N("Could not install the packages needed to share your scanner(s).") . " " .
-				  N("Your scanner(s) will not be available for non-root users."));
-		}
-		return 0;
-	    }
-	}
-
-	# Modify /etc/xinetd.d/saned to let saned run as root
-	my @sanedxinetdconf = cat_("/etc/xinetd.d/saned");
-	( s/(user\s*=\s*).*$/$1root/ ) foreach @sanedxinetdconf;
-	( s/(group\s*=\s*).*$/$1root/ ) foreach @sanedxinetdconf;
-	output("/etc/xinetd.d/saned", @sanedxinetdconf);
-
-	# Read list of hosts to where to export the local scanners
-	my @exports = cat_("/etc/sane.d/saned.conf");
-	# Read list of hosts from where to import scanners
-	my @imports = cat_("/etc/sane.d/net.conf");
-	# Add "localhost" to the machines which saned exports
-	handle_configs::set_directive(\@exports, "localhost")
-	    if !member("localhost\n", @exports);
-	# Add "localhost" to the machines which "net" imports
-	handle_configs::set_directive(\@imports, "localhost")
-	    if !member("localhost\n", @imports);
-	# Write /etc/sane.d/saned.conf
-	output("/etc/sane.d/saned.conf", @exports);
-	# Write /etc/sane.d/net.conf
-	output("/etc/sane.d/net.conf", @imports);
-
-	# Make sure that the "net" backend is active
-	scanner::add2dll("net");
-	
-	# (Re)start saned and make sure that it gets started on
-	# every boot
-	services::start_service_on_boot("saned");
-	services::start_service_on_boot("xinetd");
-	services::restart("xinetd");
-
-    } else {
-	# Disable non-root access
-
-	if (-r "/etc/xinetd.d/saned") {
-	    # Modify /etc/xinetd.d/saned to let saned run as saned
-	    my @sanedxinetdconf = cat_("/etc/xinetd.d/saned");
-	    ( s/(user\s*=\s*).*$/$1saned/ ) foreach @sanedxinetdconf;
-	    ( s/(group\s*=\s*).*$/$1saned/ ) foreach @sanedxinetdconf;
-	    output("/etc/xinetd.d/saned", @sanedxinetdconf);
-	    # Restart xinetd
-	    services::restart("xinetd") if $sanedrunning;
-	}
-    }
-
-    return 1;
-}
-
-sub detect {
-    my @configured = @_;
-    my @res;
-    # Run "sane-find-scanner", this also detects USB scanners which only
-    # work with libusb.
-
-    my @devices = detect_devices::probeall();
-
-    local *DETECT;
-    open DETECT, "LC_ALL=C sane-find-scanner -q |";
-    while (my $line = <DETECT>) {
-	my ($vendorid, $productid, $make, $model, $description, $port, $driver);
-	if ($line =~ /^\s*found\s+USB\s+scanner/i) {
-	    # Found an USB scanner
-	    if ($line =~ /vendor=(0x[0-9a-f]+)[^0-9a-f\[]+[^\[]*\[([^\[\]]+)\].*prod(|uct)=(0x[0-9a-f]+)[^0-9a-f\[]+[^\[]*\[([^\[\]]+)\]/) {
-		# Scanner connected via libusb
-		$vendorid = $1;
-		$make = $2;
-		$productid = $4;
-		$model = $5;
-		$description = "$make|$model";
-	    } elsif ($line =~ /vendor=(0x[0-9a-f]+)[^0-9a-f]+.*prod(|uct)=(0x[0-9a-f]+)[^0-9a-f]+/) {
-		# Scanner connected via scanner.o kernel module
-		$vendorid = $1;
-		$productid = $3;
-	    }
-	    if ($vendorid && $productid) {
-		my ($vendor) = ($vendorid =~ /0x([0-9a-f]+)/);
-		my ($id) = ($productid =~ /0x([0-9a-f]+)/);
-		my ($device) = grep { sprintf("%04x", $_->{vendor}) eq $vendor && sprintf("%04x", $_->{id}) eq $id } @devices;
-
-		if ($device) {
-              $driver = $device->{driver}
-		} else {
-              warn "i failled to lookupp $vendorid && $productid";
-		}
-                 
-		# We have vendor and product ID, look up the scanner in
-		# the usbtable
-		foreach my $entry (cat_("$scannerDBdir/usbtable")) {
-		    if ($entry =~ 
-			/^\s*$vendorid\s+$productid\s+.*\"([^\"]+)\"\s*$/) {
-			$description = $1;
-			$description =~ s/Seiko\s+Epson/Epson/i;
-			if ($description =~ /^([^\|]+)\|(.*)$/) {
-			    $make = $1;
-			    $model = $2;
-			}
-			last;
-		    }
-		}
-	    }
-	} elsif ($line =~ /^\s*found\s+SCSI/i) {
-	    # SCSI scanner
-	    if ($line =~ /\"([^\"\s]+)\s+([^\"]+?)\s+([^\"\s]+)\"/) {
-		$make = $1;
-		$model = $2;
-		$description = "$make|$model";
-	    }
-	} else {
-	    # Comment line in output of "sane-find-scanner"
-	    next;
-	}
-	# The Alcatel Speed Touch internet scanner is not supported by
-	# SANE
-	next if $description =~ /Alcatel.*Speed.*Touch|Camera|ISDN|ADSL/i;
-	# Extract port
-	$port = $1 if $line =~ /\s+(\S+)\s*$/;
-	# Check for duplicate (scanner.o/libusb)
-	if ($port =~ /^libusb/) {
-	    my $duplicate = 0;
-	    foreach (@res) {
-		if ($_->{val}{vendor} eq $vendorid &&
-		    $_->{val}{id} eq $productid &&
-		    $_->{port} =~ /dev.*usb.*scanner/ &&
-		    !defined($_->{port2})) {
-		    # Duplicate entry found, merge the entries
-		    $_->{port2} = $port;
-		    $_->{val}{MANUFACTURER} ||= $make;
-		    $_->{val}{MODEL} ||= $model;
-		    $_->{val}{DESCRIPTION} ||= $description;
-		    $duplicate = 1;
-		    last;
-		}
-	    }
-	    next if $duplicate;
-	}
-	# Store collected data
-	push @res, { 
-	    port => $port, 
-	    val => { 
-		CLASS => 'SCANNER',
-		MODEL => $model,
-		MANUFACTURER => $make,
-		DESCRIPTION => $description,
-		id => $productid,
-		vendor => $vendorid,
-		driver => $driver,
-	    } 
-	};
-    }
-    close DETECT;
-    if (@configured) {
-	# Remove scanners which are already working
-	foreach my $d (@res) {
-	    my $searchport1 =
-		handle_configs::searchstr(resolve_symlinks($d->{port}));
-	    my $searchport2 =
-		handle_configs::searchstr(resolve_symlinks($d->{port2}));
-	    foreach my $c (@configured) {
-		my $currentport = resolve_symlinks($c->{port});
-		if ($currentport =~ /$searchport1$/ ||
-		    $searchport2 && $currentport =~ /$searchport2$/) {
-		    $d->{configured} = 1;
-		    last;
-		}
-	    }
-	}
-	@res = grep { ! $_->{configured} } @res;
-    }
-    # blacklist device that have a driver b/c of buggy sane-find-scanner:
-    return grep { member($_->{driver}, qw(scanner unknown)) } @res;
-}
-
-sub resolve_symlinks {
-
-    # Check if a given file (either the pure filename or in a SANE device
-    # string as "<prefix>:<file>") is a symlink, if so expand the link.
-    # If the new file name is a link, expand again, until finding the
-    # physical file.
-    my ($file) = @_;
-    my $prefix = "";
-    if ($file =~ m!^([^/]*)(/.*)$!) {
-	$prefix = $1;
-	$file = $2;
-    } else {
-	return $file;
-    }
-    while (1) {
-	my $ls = `ls -l $file`;
-	if ($ls =~ m!\s($file)\s*\->\s*(\S+)\s*$!) {
-	    my $target = $2;
-	    if ($target !~ m!^/! && $file =~ m!^(.*)/[^/]+$!) {
-		$target = "$1/$target";
-	    }
-	    $file = $target;
-	} else {
-	    last;
-	}
-    }
-    return $prefix . $file;
-}
-
-sub get_usb_ids_for_port {
-    my ($port) = @_;
-    local *DETECT;
-    if ($port =~ /^\s*libusb:(\d+):(\d+)\s*$/) {
-	# Use "lsusb" to find the USB IDs
-	open DETECT, "LC_ALL=C lsusb -s $1:$2 |";
-	while (my $line = <DETECT>) {
-	    if ($line =~ /ID\s+([0-9a-f]+):(0x[0-9a-f]+)($|\s+)/) {
-		# Scanner connected via scanner.o kernel module
-		return "0x$1", "0x$2";
-		last;
-	    }
-	}
-    } else {
-	# Run "sane-find-scanner" on the port
-	open DETECT, "LC_ALL=C sane-find-scanner -q $port |";
-	while (my $line = <DETECT>) {
-	    if ($line =~ /^\s*found\s+USB\s+scanner/i) {
-		if ($line =~ /vendor=(0x[0-9a-f]+)[^0-9a-f]+.*prod(|uct)=(0x[0-9a-f]+)[^0-9a-f]+/) {
-		    # Scanner connected via scanner.o kernel module
-		    return $1, $3;
-		}
-	    }
-	}
-    }
-}
-
-sub readconfiglinetemplates {
-    # Read templates for configuration file lines
-    my %configlines;
-    my $backend;
-    foreach my $line (cat_("$scannerDBdir/scannerconfigs")) {
-	chomp $line;
-	if ($line =~ /^\s*SERVER\s+(\S+)\s*$/) {
-	    $backend = $1;
-	} elsif ($backend) {
-	    push @{$configlines{$backend}}, $line;
-	}
-    }
-    return \%configlines;
-}
-
-sub firmwareline {
-    # Determine whether the given SANE backend supports a firmware file
-    # and return the line needed in the config file
-    my ($backend) = @_;
-    # Read templates for configuration file lines
-    my %configlines = %{readconfiglinetemplates()};
-    # Does the backend support a line for the firmware?
-    my @firmwarelines = (grep { s/^FIRMWARELINE // } @{$configlines{$backend}});
-    return join("\n", @firmwarelines);
-}
-
-sub readScannerDB {
-    my ($file) = @_;
-    my ($card, %cards);
-
-    my $F = common::openFileMaybeCompressed($file);
-
-    my ($lineno, $cmd, $val) = 0;
-    my $fs = {
-        LINE => sub { push @{$card->{lines}}, "LINE $val" },
-        SCSILINE => sub { push @{$card->{lines}}, "SCSILINE $val" },
-        USBLINE => sub { push @{$card->{lines}}, "USBLINE $val" },
-        PARPORTLINE => sub { push @{$card->{lines}}, "PARPORTLINE $val" },
-        FIRMWARELINE => sub { push @{$card->{lines}}, "FIRMWARELINE $val" },
-	NAME => sub {
-	    #$cards{$card->{type}} = $card if ($card and !$card->{flags}{unsupported});
-	    $cards{$card->{type}} = $card if $card;
-	    $val =~ s/Seiko\s+Epson/Epson/i;
-	    $card = { type => $val };
-	},
-	SEE => sub {
-	    $val =~ s/Seiko\s+Epson/Epson/i;
-	    my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
-
-	    push @{$card->{lines}}, @{$c->{lines} || []};
-	    add2hash($card->{flags}, $c->{flags});
-	    add2hash($card, $c);
-	},
-	ASK => sub { $card->{ask} = $val },
-	SERVER => sub { $card->{server} = $val },
-	DRIVER => sub { $card->{driver} = $val },
-	KERNEL => sub { push(@{$card->{kernel}}, $val) },
-	UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 },
-	MANUAL => sub { $card->{flags}{manual} = 1 },
-	MANUALREQUIRED => sub { $card->{flags}{manual} = 2 },
-	COMMENT => sub {},
-    };
-
-    local $_;
-    while (<$F>) { $lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-	/^END/ and do { $cards{$card->{type}} = $card if $card; last };
-	($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next;
-	my $f = $fs->{$cmd};
-	$f ? $f->() : log::l("unknown line $lineno ($_)");
-    }
-    \%cards;
-}
-
-sub updateScannerDBfromUsbtable() {
-    substInFile { s/^END// } "ScannerDB";
-    my $to_add = "# generated from usbtable by scannerdrake\n";
-    foreach (cat_("$ENV{SHARE_PATH}/ldetect-lst/usbtable")) {
-	my ($vendor_id, $product_id, $mod, $name) = chomp_(split /\s/,$_,4);
-	next if $mod ne '"scanner"';
-	$name =~ s/\"(.*)\"$/$1/;
-	if (member($name, keys %$scanner::scannerDB)) {
-	    print "#[$name] already in ScannerDB!\n";
-	    next;
-	}
-	$to_add .= "NAME $name\nDRIVER USB\nCOMMENT usb $vendor_id $product_id\nUNSUPPORTED\n\n";
-    }
-    $to_add .= "END\n";
-
-    append_to_file("ScannerDB", $to_add);
-}
-
-sub updateScannerDBfromSane {
-    my ($sanesrcdir) = @_;
-    substInFile { s/^END// } "ScannerDB";
-
-    my $to_add = "# generated from Sane by scannerdrake\n";
-    # for compat with our usbtable
-    my $sane2DB = { 
-		   "Acer" => "Acer Peripherals Inc.",
-		   "AGFA" => "AGFA-Gevaert NV",
-		   "Agfa" => "AGFA-Gevaert NV",
-		   "Epson" => "Epson Corp.",
-		   "Fujitsu Computer Products of America" => "Fujitsu",
-		   "HP" => sub { $_[0] =~ s/HP\s/Hewlett-Packard|/; $_[0] =~ s/HP4200/Hewlett-Packard|ScanJet 4200C/; $_[0] },
-		   "Hewlett-Packard" => sub { $_[0] =~ s/HP 3200 C/Hewlett-Packard|ScanJet 3200C/ or $_[0] = "Hewlett-Packard|$_[0]"; $_[0] },
-		   "Kodak" => "Kodak Co.",
-		   "Mustek" => "Mustek Systems Inc.",
-		   "NEC" => "NEC Systems",
-		   "Nikon" => "Nikon Corp.",
-		   "Plustek" => "Plustek, Inc.",
-		   "Primax" => "Primax Electronics",
-		   "Siemens" => "Siemens Information and Communication Products",
-		   "Trust" => "Trust Technologies",
-		   "UMAX" => "Umax",
-		   "Vobis/Highscreen" => "Vobis",
-		  };
-
-    # Read templates for configuration file lines
-    my %configlines = %{readconfiglinetemplates()};
-
-    foreach my $ff (glob_("$sanesrcdir/doc/descriptions/*.desc"), glob_("$sanesrcdir/doc/descriptions-external/*.desc"), "UNSUPPORTED") {
-	my $f = $ff;
-	# unsupported.desc must be treated separately, as the list of
-	# unsupported scanners in SANE is out of date.
-	next if $f =~ /unsupported.desc$/;
-	# Treat unsupported.desc in the end
-	$f = "$sanesrcdir/doc/descriptions/unsupported.desc" if
-	    ($f eq "UNSUPPORTED");
-	my $F = common::openFileMaybeCompressed($f);
-	$to_add .= "\n# from $f";
-	my ($lineno, $cmd, $val) = 0;
-	my ($name, $intf, $comment, $mfg, $backend);
-	my $fs = {
-		  backend => sub { $backend = $val },
-		  mfg => sub { $mfg = $val; $name = undef },#bug when a new mfg comes. should called $fs->{ $name }(); but ??
-		  model => sub {
-		      unless ($name) { $name = $val; return }
-		      $name = member($mfg, keys %$sane2DB) ?
-			ref($sane2DB->{$mfg}) ? $sane2DB->{$mfg}($name) : "$sane2DB->{ $mfg }|$name" : "$mfg|$name";
-		      # When adding the unsupported scanner models, check
-		      # whether the model is not already supported. To
-		      # compare the names ignore upper/lower case.
-		      my $searchname = quotemeta($name);
-		      if (($backend =~ /unsupported/i) &&
-			  ($to_add =~ /^NAME $searchname$/im)) {
-			  $to_add .= "# $name already supported!\n";
-		      } else {
-			  # SANE bug: "snapscan" calls itself "SnapScan"
-			  $backend =~ s/SnapScan/snapscan/g;
-			  $to_add .= "\nNAME $name\nSERVER $backend\nDRIVER $intf\n";
-			  # Go through the configuration lines of
-			  # this backend and add what is needed for the
-			  # interfaces of this scanner
-			  foreach my $line (@{$configlines{$backend}}) {
-			      my $i = $1 if $line =~ /^\s*(\S*?)LINE/;
-			      if (!$i || $i eq "FIRMWARE" || 
-				  $intf =~ /$i/i) {
-				  $to_add .= "$line\n";
-			      }
-			  }
-			  if ($backend =~
-			      /(unsupported|mustek_pp|gphoto2)/i) {
-			      $to_add .= "UNSUPPORTED\n";
-			  }
-			  $to_add .= "COMMENT $comment\n" if $comment;
-			  $comment = undef; 
-		      }
-		      $name = $val;
-		  },
-		  interface => sub { $intf = $val },
-		  comment => sub { $comment = $val },
-		 };
-	local $_;
-	while (<$F>) { $lineno++;
-		       s/\s+$//;
-		       /^;/ and next;
-		       ($cmd, $val) = /:(\S+)\s*\"([^;]*)\"/ or next; #log::l("bad line $lineno ($_)"), next;
-		       my $f = $fs->{$cmd};
-		       $f ? $f->() : log::l("unknown line $lineno ($_)");
-		   }
-	$fs->{model}(); # the last one
-    }
-    $to_add .= "\nEND\n";
-    append_to_file("ScannerDB", $to_add);
-}
-
-1; #
diff --git a/perl-install/security/help.pm b/perl-install/security/help.pm
deleted file mode 100644
index 6f24b4bbb..000000000
--- a/perl-install/security/help.pm
+++ /dev/null
@@ -1,139 +0,0 @@
-package security::help;
-# This help was forked from msec internal function descriptions
-# They were then reworked in order to be targeted for end users, not msec developpers
-
-
-use strict;
-use common;
-
-our %help = (
-
-'accept_bogus_error_responses' => N("Accept/Refuse bogus IPv4 error messages."),
-
-'accept_broadcasted_icmp_echo' => N(" Accept/Refuse broadcasted icmp echo."),
-
-'accept_icmp_echo' => N(" Accept/Refuse icmp echo."),
-
-'allow_autologin' => N("Allow/Forbid autologin."),
-
-'allow_issues' =>
-             #-PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-             N("If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.
-
-If set to NONE, no issues are allowed.
-
-Else only /etc/issue is allowed."),
-
-'allow_reboot' => N("Allow/Forbid reboot by the console user."),
-
-'allow_remote_root_login' => N("Allow/Forbid remote root login."),
-
-'allow_root_login' => N("Allow/Forbid direct root login."),
-
-'allow_user_list' => N("Allow/Forbid the list of users on the system on display managers (kdm and gdm)."),
-
-'allow_xauth_from_root' => N("Allow/forbid to export display when
-passing from the root account to the other users.
-
-See pam_xauth(8) for more details.'"),
-
-'allow_x_connections' => N("Allow/Forbid X connections:
-
-- ALL (all connections are allowed),
-
-- LOCAL (only connection from local machine),
-
-- NONE (no connection)."),
-
-'allow_xserver_to_listen' => N("The argument specifies if clients are authorized to connect
-to the X server from the network on the tcp port 6000 or not."),
-
-'authorize_services' =>
-             #-PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-             N("Authorize:
-
-- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to \"ALL\",
-
-- only local ones if set to \"LOCAL\"
-
-- none if set to \"NONE\".
-
-To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5))."),
-
-'create_server_link' => N("If SERVER_LEVEL (or SECURE_LEVEL if absent)
-is greater than 3 in /etc/security/msec/security.conf, creates the
-symlink /etc/security/msec/server to point to
-/etc/security/msec/server.<SERVER_LEVEL>.
-
-The /etc/security/msec/server is used by chkconfig --add to decide to
-add a service if it is present in the file during the installation of
-packages."),
-
-'enable_at_crontab' => N("Enable/Disable crontab and at for users.
-
-Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)
-and crontab(1))."),
-
-'enable_console_log' => N("Enable/Disable syslog reports to console 12"),
-
-'enable_dns_spoofing_protection' => N("Enable/Disable name resolution spoofing protection.  If
-\"%s\" is true, also reports to syslog.", N("Security Alerts:")),
-
-'enable_ip_spoofing_protection' => N("Enable/Disable IP spoofing protection."),
-
-'enable_libsafe' => N("Enable/Disable libsafe if libsafe is found on the system."),
-
-'enable_log_strange_packets' => N("Enable/Disable the logging of IPv4 strange packets."),
-
-'enable_msec_cron' => N("Enable/Disable msec hourly security check."),
-
-'enable_pam_wheel_for_su' => N(" Enabling su only from members of the wheel group or allow su from any user."),
-
-'enable_password' => N("Use password to authenticate users."),
-
-'enable_promisc_check' => N("Activate/Disable ethernet cards promiscuity check."),
-
-'enable_security_check' => N(" Activate/Disable daily security check."),
-
-'enable_sulogin' => N(" Enable/Disable sulogin(8) in single user level."),
-
-'no_password_aging_for' => N("Add the name as an exception to the handling of password aging by msec."),
-
-'password_aging' => N("Set password aging to \"max\" days and delay to change to \"inactive\"."),
-
-'password_history' => N("Set the password history length to prevent password reuse."),
-
-'password_length' => N("Set the password minimum length and minimum number of digit and minimum number of capitalized letters."),
-
-'set_root_umask' => N("Set the root umask."),
-CHECK_OPEN_PORT => N("if set to yes, check open ports."),
-CHECK_PASSWD => N("if set to yes, check for:
-
-- empty passwords,
-
-- no password in /etc/shadow
-
-- for users with the 0 id other than root."),
-CHECK_PERMS => N("if set to yes, check permissions of files in the users' home."),
-CHECK_PROMISC => N("if set to yes, check if the network devices are in promiscuous mode."),
-CHECK_SECURITY => N("if set to yes, run the daily security checks."),
-CHECK_SGID => N("if set to yes, check additions/removals of sgid files."),
-CHECK_SHADOW => N("if set to yes, check empty password in /etc/shadow."),
-CHECK_SUID_MD5 => N("if set to yes, verify checksum of the suid/sgid files."),
-CHECK_SUID_ROOT => N("if set to yes, check additions/removals of suid root files."),
-CHECK_UNOWNED => N("if set to yes, report unowned files."),
-CHECK_WRITABLE => N("if set to yes, check files/directories writable by everybody."),
-CHKROOTKIT_CHECK => N("if set to yes, run chkrootkit checks."),
-MAIL_USER => N("if set, send the mail report to this email address else send it to root."),
-MAIL_WARN => N("if set to yes, report check result by mail."),
-MAIL_EMPTY_CONTENT => N("Do not send mails if there's nothing to warn about"),
-RPM_CHECK => N("if set to yes, run some checks against the rpm database."),
-SYSLOG_WARN => N("if set to yes, report check result to syslog."),
-TTY_WARN => N("if set to yes, reports check result to tty."),
-
-'set_shell_history_size' => N("Set shell commands history size. A value of -1 means unlimited."),
-
-'set_shell_timeout' => N("Set the shell timeout. A value of zero means no timeout.") . "\n\n" . N("Timeout unit is second"),
-
-'set_user_umask' => N("Set the user umask."),
-);
diff --git a/perl-install/security/l10n.pm b/perl-install/security/l10n.pm
deleted file mode 100644
index de39c3d41..000000000
--- a/perl-install/security/l10n.pm
+++ /dev/null
@@ -1,66 +0,0 @@
-package security::l10n;
-# This help was build from stripped from python description of msec functions
-# soft/msec/share/libmsec.py
-#
-# It's used in draksec option labels
-
-use common;
-
-sub fields() {
-    return (
-            'accept_bogus_error_responses' => N("Accept bogus IPv4 error messages"),
-            'accept_broadcasted_icmp_echo' => N("Accept broadcasted icmp echo"),
-            'accept_icmp_echo' => N("Accept icmp echo"),
-            'allow_autologin' => N("Autologin"),
-            'allow_issues' => N("/etc/issue* exist"),
-            'allow_reboot' => N("Reboot by the console user"),
-            'allow_remote_root_login' => N("Allow remote root login"),
-            'allow_root_login' => N("Direct root login"),
-            'allow_user_list' => N("List users on display managers (kdm and gdm)"),
-            'allow_xauth_from_root' => N("Export display when passing from root to the other users"),
-            'allow_x_connections' => N("Allow X Window connections"),
-            'allow_xserver_to_listen' => N("Authorize TCP connections to X Window"),
-            'authorize_services' => N("Authorize all services controlled by tcp_wrappers"),
-            'create_server_link' => N("Chkconfig obey msec rules"),
-            'enable_at_crontab' => N("Enable \"crontab\" and \"at\" for users"),
-            'enable_console_log' => N("Syslog reports to console 12"),
-            'enable_dns_spoofing_protection' => N("Name resolution spoofing protection"),
-            'enable_ip_spoofing_protection' => N("Enable IP spoofing protection"),
-            'enable_libsafe' => N("Enable libsafe if libsafe is found on the system"),
-            'enable_log_strange_packets' => N("Enable the logging of IPv4 strange packets"),
-            'enable_msec_cron' => N("Enable msec hourly security check"),
-            'enable_pam_wheel_for_su' => N("Enable su only from the wheel group members or for any user"),
-            'enable_password' => N("Use password to authenticate users"),
-            'enable_promisc_check' => N("Ethernet cards promiscuity check"),
-            'enable_security_check' => N("Daily security check"),
-            'enable_sulogin' => N("Sulogin(8) in single user level"),
-            'no_password_aging_for' => N("No password aging for"),
-            'password_aging' => N("Set password expiration and account inactivation delays"),
-            'password_history' => N("Password history length"),
-            'password_length' => N("Password minimum length and number of digits and upcase letters"),
-            'set_root_umask' => N("Root umask"),
-            'set_shell_history_size' => N("Shell history size"),
-            'set_shell_timeout' => N("Shell timeout"),
-            'set_user_umask' => N("User umask"),
-            CHECK_OPEN_PORT => N("Check open ports"),
-            CHECK_PASSWD => N("Check for unsecured accounts"),
-            CHECK_PERMS => N("Check permissions of files in the users' home"),
-            CHECK_PROMISC => N("Check if the network devices are in promiscuous mode"),
-            CHECK_SECURITY => N("Run the daily security checks"),
-            CHECK_SGID => N("Check additions/removals of sgid files"),
-            CHECK_SHADOW => N("Check empty password in /etc/shadow"),
-            CHECK_SUID_MD5 => N("Verify checksum of the suid/sgid files"),
-            CHECK_SUID_ROOT => N("Check additions/removals of suid root files"),
-            CHECK_UNOWNED => N("Report unowned files"),
-            CHECK_WRITABLE => N("Check files/directories writable by everybody"),
-            CHKROOTKIT_CHECK => N("Run chkrootkit checks"),
-            MAIL_EMPTY_CONTENT => N("Do not send mails when unneeded"),
-            MAIL_USER => N("If set, send the mail report to this email address else send it to root"),
-            MAIL_WARN => N("Report check result by mail"),
-            RPM_CHECK => N("Run some checks against the rpm database"),
-            SYSLOG_WARN => N("Report check result to syslog"),
-            TTY_WARN => N("Reports check result to tty"),
-           );
-}
-
-1;
diff --git a/perl-install/security/level.pm b/perl-install/security/level.pm
deleted file mode 100644
index c8974f3bf..000000000
--- a/perl-install/security/level.pm
+++ /dev/null
@@ -1,70 +0,0 @@
-package security::level;
-
-use strict;
-use common;
-use run_program;
-
-
-sub level_list() {
-    (
-     0 => N("Welcome To Crackers"),
-     1 => N("Poor"),
-     2 => N("Standard"),
-     3 => N("High"),
-     4 => N("Higher"),
-     5 => N("Paranoid"),
-    );
-}
-
-sub to_string { +{ level_list() }->{$_[0]} }
-sub from_string { +{ reverse level_list() }->{$_[0]} || 2 }
-
-sub get_string() { to_string(get() || 2) }
-sub get_common_list() { map { to_string($_) } (1, 2, 3, 4, 5) }
-
-sub get() {
-    cat_("$::prefix/etc/profile")           =~ /export SECURE_LEVEL=(\d+)/ && $1 || #- 8.0 msec
-    cat_("$::prefix/etc/profile.d/msec.sh") =~ /export SECURE_LEVEL=(\d+)/ && $1 || #- 8.1 msec
-      ${{ getVarsFromSh("$::prefix/etc/sysconfig/msec") }}{SECURE_LEVEL}  || #- 8.2 msec
-	$ENV{SECURE_LEVEL} || 3;
-}
-
-sub set {
-    my ($security) = @_;
-    run_program::rooted($::prefix, 'msec', '-o', 'run_commands=0', '-o', 'log=stderr', $security || 3);
-}
-
-sub level_choose {
-    my ($in, $security, $libsafe, $email) = @_;
-
-    my %help = (
-      0 => N("This level is to be used with care. It makes your system more easy to use,
-but very sensitive. It must not be used for a machine connected to others
-or to the Internet. There is no password access."),
-      1 => N("Passwords are now enabled, but use as a networked computer is still not recommended."),
-      2 => N("This is the standard security recommended for a computer that will be used to connect to the Internet as a client."),
-      3 => N("There are already some restrictions, and more automatic checks are run every night."),
-      4 => N("With this security level, the use of this system as a server becomes possible.
-The security is now high enough to use the system as a server which can accept
-connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level."),
-      5 => N("This is similar to the previous level, but the system is entirely closed and security features are at their maximum."),
-    );
-
-    my @l = 2 .. 5;
-
-    $in->ask_from_({ title => N("DrakSec Basic Options"),
-		     messages => N("Please choose the desired security level") . "\n\n" .
-		                 join('', map { to_string($_) . ": " . formatAlaTeX($help{$_}) . "\n\n" } @l),
-		     interactive_help_id => 'miscellaneous',
-		   }, [
-              { label => N("Security level"), val => $security, list => \@l, format => \&to_string },
-                if_($in->do_pkgs->is_installed('libsafe') && arch() =~ /^i.86/,
-                { label => N("Use libsafe for servers"), val => $libsafe, type => 'bool', text =>
-                  N("A library which defends against buffer overflow and format string attacks.") }),
-                { label => N("Security Administrator (login or email)"), val => $email, },
-            ],
-    );
-}
-
-
-1;
diff --git a/perl-install/security/msec.pm b/perl-install/security/msec.pm
deleted file mode 100644
index e4b9da561..000000000
--- a/perl-install/security/msec.pm
+++ /dev/null
@@ -1,188 +0,0 @@
-package security::msec;
-
-use strict;
-use MDK::Common::File;
-use MDK::Common;
-
-
-#-------------------------------------------------------------
-# msec options managment methods
-
-
-#-------------------------------------------------------------
-# option defaults
-
-sub load_defaults {
-    my ($msec, $category) = @_;
-    my $separator = $msec->{$category}{def_separator};
-    map { 
-        my ($opt, $val) = split(/$separator/, $_, 2);
-        chop $val;
-        if_($opt ne 'set_security_conf', $opt => $val);
-    } cat_($msec->{$category}{defaults_file}), if_($category eq "checks", 'MAIL_USER');
-}
-
-
-# get_XXX_default(function) -
-#   return the default of the function|check passed in argument.
-
-sub get_check_default {
-    my ($msec, $check) = @_;
-    $msec->{checks}{default}{$check};
-}
-
-sub get_function_default {
-    my ($msec, $function) = @_;
-    $msec->{functions}{default}{$function};
-}
-
-
-
-#-------------------------------------------------------------
-# option values
-
-sub load_values {
-    my ($msec, $category) = @_;
-    my $separator = $msec->{$category}{val_separator};
-    map {
-        my ($opt, $val) = split /$separator/;
-        chop $val;
-        $val =~ s/[()]//g;
-        chop $opt if $separator eq '\(';  # $opt =~ s/ //g if $separator eq '\(';
-        if_(defined($val), $opt => $val);
-    } cat_($msec->{$category}{values_file});
-}
-
-
-# get_XXX_value(check|function) -
-#   return the value of the function|check passed in argument.
-#   If no value is set, return "default".
-
-sub get_function_value {
-    my ($msec, $function) = @_;
-    exists $msec->{functions}{value}{$function} ? $msec->{functions}{value}{$function} : "default";
-}
-
-sub get_check_value {
-    my ($msec, $check) = @_;
-    $msec->{checks}{value}{$check} || "default";
-}
-
-
-
-#-------------------------------------------------------------
-# get list of check|functions
-
-# list_(functions|checks) -
-#   return a list of functions|checks handled by level.local|security.conf
-
-sub raw_checks_list {
-    my ($msec) = @_;
-    keys %{$msec->{checks}{default}};
-}
-
-sub list_checks {
-    my ($msec) = @_;
-    difference2([ $msec->raw_checks_list ], [ qw(MAIL_WARN MAIL_USER) ]);
-}
-
-sub list_functions {
-    my ($msec, $category) = @_;
-
-    ## TODO handle 3 last functions here so they can be removed from this list
-    my @ignore_list = qw(indirect commit_changes closelog error initlog log set_secure_level
-					set_security_conf set_server_level print_changes get_translation create_server_link);
-
-    my %options = (
-	    'network' => [qw(accept_bogus_error_responses accept_broadcasted_icmp_echo accept_icmp_echo
-					enable_dns_spoofing_protection enable_ip_spoofing_protection
-					enable_log_strange_packets enable_promisc_check no_password_aging_for)],
-	    'system' =>  [qw(allow_autologin allow_issues allow_reboot allow_remote_root_login
-                         allow_root_login allow_user_list allow_xauth_from_root allow_x_connections allow_xserver_to_listen
-                         authorize_services enable_at_crontab enable_console_log
-                         enable_msec_cron enable_pam_wheel_for_su enable_password enable_security_check
-                         enable_sulogin password_aging password_history password_length set_root_umask
-                         set_shell_history_size set_shell_timeout set_user_umask)]);
-
-    # get all function names; filter out those which are in the ignore
-    # list, return what lefts.
-    grep { !member($_, @ignore_list) && member($_, @{$options{$category}}) } keys %{$msec->{functions}{default}};
-}
-
-
-#-------------------------------------------------------------
-# set back checks|functions values
-
-sub set_function {
-    my ($msec, $function, $value) = @_;
-    $msec->{functions}{value}{$function} = $value;
-}
-
-sub set_check {
-    my ($msec, $check, $value) = @_;
-    $msec->{checks}{value}{$check} = $value;
-}
-
-
-#-------------------------------------------------------------
-# apply configuration
-
-# config_(check|function)(check|function, value) -
-#   Apply the configuration to 'prefix'/etc/security/msec/security.conf||/etc/security/msec/level.local
-
-sub apply_functions {
-    my ($msec) = @_;
-    my @list = sort($msec->list_functions('system'), $msec->list_functions('network'));
-    touch($msec->{functions}{values_file}) if !-e $msec->{functions}{values_file};
-    substInFile {
-        foreach my $function (@list) { s/^$function.*\n// }
-        if (eof) {
-            $_ .= join("\n", if_(!$_, ''), (map { 
-                my $value = $msec->get_function_value($_);
-                if_($value ne 'default', "$_ ($value)");
-            } @list), "");
-        }
-    } $msec->{functions}{values_file};
-}
-
-sub apply_checks {
-    my ($msec) = @_;
-    my @list =  sort $msec->raw_checks_list;
-    setVarsInSh($msec->{checks}{values_file},
-                {
-                 map {
-                     my $value = $msec->get_check_value($_);
-                     if_($value ne 'default', $_ => $value);
-                 } @list
-                }
-               );
-}
-
-sub reload {
-    my ($msec) = @_;
-    require security::level;
-    my $num_level = security::level::get();
-    $msec->{functions}{defaults_file} = "$::prefix/usr/share/msec/level.$num_level";
-    $msec->{functions}{default} = { $msec->load_defaults('functions') };
-}
-
-sub new { 
-    my ($type) = @_;
-    my $msec = bless {}, $type;
-
-    $msec->{functions}{values_file}   = "$::prefix/etc/security/msec/level.local";
-    $msec->{checks}{values_file}      = "$::prefix/etc/security/msec/security.conf";
-    $msec->{checks}{defaults_file}    = "$::prefix/var/lib/msec/security.conf";
-    $msec->{checks}{val_separator}    = '=';
-    $msec->{functions}{val_separator} = '\(';
-    $msec->{checks}{def_separator}    = '=';
-    $msec->{functions}{def_separator} = ' ';
-    $msec->reload;
-
-    $msec->{checks}{default}    = { $msec->load_defaults('checks') };
-    $msec->{functions}{value}   = { $msec->load_values('functions') };
-    $msec->{checks}{value}      = { $msec->load_values('checks') };
-    $msec;
-}
-
-1;
diff --git a/perl-install/security/various.pm b/perl-install/security/various.pm
deleted file mode 100644
index 23b9174ef..000000000
--- a/perl-install/security/various.pm
+++ /dev/null
@@ -1,30 +0,0 @@
-package security::various; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-sub config_libsafe {
-    my $setting = @_ > 1;
-    my ($prefix, $libsafe) = @_;
-    my %t = getVarsFromSh("$prefix/etc/sysconfig/system");
-    if ($setting) {
-        $t{LIBSAFE} = bool2yesno($libsafe);
-        setVarsInSh("$prefix/etc/sysconfig/system", \%t);
-    }
-    text2bool($t{LIBSAFE});
-}
-
-sub config_security_user {
-    my $setting = @_ > 1;
-    my ($prefix, $sec_user) = @_;
-    my %t = getVarsFromSh("$prefix/etc/security/msec/security.conf");
-    if ($setting) {
-        $t{MAIL_USER} = $sec_user;
-	setVarsInSh("$prefix/etc/security/msec/security.conf", \%t);
-    }
-    $t{MAIL_USER};
-}
-
-1;
diff --git a/perl-install/services.pm b/perl-install/services.pm
deleted file mode 100644
index 35c0b88a6..000000000
--- a/perl-install/services.pm
+++ /dev/null
@@ -1,399 +0,0 @@
-package services; # $Id$
-
-
-
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-
-use strict;
-use common;
-use run_program;
-
-use common;
-use run_program;
-
-sub description {
-    my %services = (
-alsa => N_("Launch the ALSA (Advanced Linux Sound Architecture) sound system"),
-anacron => N_("Anacron is a periodic command scheduler."),
-apmd => N_("apmd is used for monitoring battery status and logging it via syslog.
-It can also be used for shutting down the machine when the battery is low."),
-atd => N_("Runs commands scheduled by the at command at the time specified when
-at was run, and runs batch commands when the load average is low enough."),
-crond => N_("cron is a standard UNIX program that runs user-specified programs
-at periodic scheduled times. vixie cron adds a number of features to the basic
-UNIX cron, including better security and more powerful configuration options."),
-fam => N_("FAM is a file monitoring daemon. It is used to get reports when files change.
-It is used by GNOME and KDE"),
-gpm => N_("GPM adds mouse support to text-based Linux applications such the
-Midnight Commander. It also allows mouse-based console cut-and-paste operations,
-and includes support for pop-up menus on the console."),
-harddrake => N_("HardDrake runs a hardware probe, and optionally configures
-new/changed hardware."),
-httpd => N_("Apache is a World Wide Web server. It is used to serve HTML files and CGI."),
-inet => N_("The internet superserver daemon (commonly called inetd) starts a
-variety of other internet services as needed. It is responsible for starting
-many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables
-all of the services it is responsible for."),
-ipchains => N_("Launch packet filtering for Linux kernel 2.2 series, to set
-up a firewall to protect your machine from network attacks."),
-keytable => N_("This package loads the selected keyboard map as set in
-/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.
-You should leave this enabled for most machines."),
-kheader => N_("Automatic regeneration of kernel header in /boot for
-/usr/include/linux/{autoconf,version}.h"),
-kudzu => N_("Automatic detection and configuration of hardware at boot."),
-linuxconf => N_("Linuxconf will sometimes arrange to perform various tasks
-at boot-time to maintain the system configuration."),
-lpd => N_("lpd is the print daemon required for lpr to work properly. It is
-basically a server that arbitrates print jobs to printer(s)."),
-lvs => N_("Linux Virtual Server, used to build a high-performance and highly
-available server."),
-named => N_("named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."),
-netfs => N_("Mounts and unmounts all Network File System (NFS), SMB (Lan
-Manager/Windows), and NCP (NetWare) mount points."),
-network => N_("Activates/Deactivates all network interfaces configured to start
-at boot time."),
-nfs => N_("NFS is a popular protocol for file sharing across TCP/IP networks.
-This service provides NFS server functionality, which is configured via the
-/etc/exports file."),
-nfslock => N_("NFS is a popular protocol for file sharing across TCP/IP
-networks. This service provides NFS file locking functionality."),
-numlock => N_("Automatically switch on numlock key locker under console
-and Xorg at boot."),
-oki4daemon => N_("Support the OKI 4w and compatible winprinters."),
-pcmcia => N_("PCMCIA support is usually to support things like ethernet and
-modems in laptops.  It will not get started unless configured so it is safe to have
-it installed on machines that do not need it."),
-portmap => N_("The portmapper manages RPC connections, which are used by
-protocols such as NFS and NIS. The portmap server must be running on machines
-which act as servers for protocols which make use of the RPC mechanism."),
-postfix => N_("Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."),
-random => N_("Saves and restores system entropy pool for higher quality random
-number generation."),
-rawdevices => N_("Assign raw devices to block devices (such as hard drive
-partitions), for the use of applications such as Oracle or DVD players"),
-routed => N_("The routed daemon allows for automatic IP router table updated via
-the RIP protocol. While RIP is widely used on small networks, more complex
-routing protocols are needed for complex networks."),
-rstatd => N_("The rstat protocol allows users on a network to retrieve
-performance metrics for any machine on that network."),
-rusersd => N_("The rusers protocol allows users on a network to identify who is
-logged in on other responding machines."),
-rwhod => N_("The rwho protocol lets remote users get a list of all of the users
-logged into a machine running the rwho daemon (similar to finger)."),
-sound => N_("Launch the sound system on your machine"),
-syslog => N_("Syslog is the facility by which many daemons use to log messages
-to various system log files.  It is a good idea to always run syslog."),
-usb => N_("Load the drivers for your usb devices."),
-xfs => N_("Starts the X Font Server (this is mandatory for Xorg to run)."),
-    );
-    my ($name) = @_;
-    my $s = $services{$name};
-    if ($s) {
-	$s = translate($s);
-    } else {
-	my $file = find { -e $_ } map { "$::prefix$_/$name" } '/etc/rc.d/init.d', '/etc/init.d', '/etc/xinetd.d';
-	$s = cat_($file);
-	$s =~ s/\\\s*\n#\s*//mg;
-	$s = 
-	  $s =~ /^# description:\s+(.*?)^(?:[^#]|# {0,2}\S)/sm ? $1 :
-	  $s =~ /^#\s*(.*?)^[^#]/sm ? $1 : '';
-
-	$s =~ s/#\s*//mg;
-    }
-    $s =~ s/\n/ /gm; $s =~ s/\s+$//;
-    $s;
-}
-
-sub ask_install_simple {
-    my ($in) = @_;
-    my ($l, $on_services) = services();
-    $in->ask_many_from_list("drakxservices",
-			    N("Choose which services should be automatically started at boot time"),
-			    {
-			     list => $l,
-			     help => sub { description($_[0]) },
-			     values => $on_services,
-			     sort => 1,
-			    });
-}
-
-sub ask_install {
-    my ($in) = @_;
-    my %root_services = (
-			 N("Printing") => [ qw(cups cupslpd lpr lpd oki4daemon hpoj cups-lpd) ],
-			 N("Internet") => [ qw(httpd boa tux roxen ftp pftp tftp proftpd wu-ftpd pure-ftpdipsec proftpd-xinetd
-                                               ipchains iptables ipvsadm isdn4linux ibod jabber jabber-icq adsl squid
-                                               portsentry prelude nessusd junkbuster radvd cddbp ippl iptoip jail.init) ],
-			 N("File sharing") => [ qw(nfs nfslock smb nettalk netfs mcserv autofs amd
-                                                   venus.init auth2.init codasrv.init update.init swat) ],
-			 N("System") => [ qw(usb usbd pcmcia irda xinetd inetd kudzu harddrake apmd sound network xfs
-                                             alsa functions halt kheader killall mandrake_everytime mandrake_firstime
-                                             random rawdevices single keytable syslog crond medusa-init portmap acon
-                                             anacron atd gpm psacct wine acpid numlock jserver sensors mosix bpowerd bpowerfail
-                                             fcron powertweak.init ups syslog-ng cvs apcupsd) ],
-			 N("Remote Administration") => [ qw(sshd telnetd telnet rsh rlogin rexec webmin cfd heartbeat ldirectord
-                                                            iplog mon vncserver netsaint olympusd drakxtools_http) ],
-#			 N("Network Client") => [ qw(ypbind nscd arpwatch fetchmail dnrd_rc diald rsync) ],
-#			 N("Network Server") => [ qw(named bootparamd ntpd xntpd chronyd postfix sendmail
-#                                                     imap imaps ipop2 ipop3 pop3s routed yppasswdd ypserv ldap dhcpd dhcrelay
-#                                                     hylafax innd identd rstatd rusersd rwalld rwhod gated
-#                                                     kadmin kprop krb524 krb5kdc krb5server hldsld bayonne sockd dhsd gnu-pop3d
-#                                                     gdips pptpd.conf vrrpd crossfire bnetd pvmd ircd sympa finger ntalk talk) ],
-			 N("Database Server") => [ qw(mysql postgresql) ],
-			);
-    my %services_root;
-    foreach my $root (keys %root_services) {
-	$services_root{$_} = $root foreach @{$root_services{$root}};
-    }
-    my ($l, $on_services) = services();
-    my %services;
-    $services{$_} = 0 foreach @{$l || []};
-    $services{$_} = 1 foreach @{$on_services || []};
-
-    $in->ask_browse_tree_info('drakxservices', N("Choose which services should be automatically started at boot time"),
-			      {
-			       node_state => sub { $services{$_[0]} ? 'selected' : 'unselected' },
-			       build_tree => sub {
-				   my ($add_node, $flat) = @_;
-				   $add_node->($_, !$flat && ($services_root{$_} || N("Other")))
-				     foreach sort keys %services;
-			       },
-			       grep_unselected => sub { grep { !$services{$_} } @_ },
-			       toggle_nodes => sub {
-				   my ($set_state, @nodes) = @_;
-				   my $new_state = !$services{$nodes[0]};
-				   foreach (@nodes) {
-				       $set_state->($_, $new_state ? 'selected' : 'unselected');
-				       $services{$_} = $new_state;
-				   }
-			       },
-			       get_status => sub {
-				   N("Services: %d activated for %d registered", 
-				     scalar(grep { $_ } values %services),
-				     scalar(values %services));
-			       },
-			       get_info => sub { formatLines(description($_[0])) },
-			       interactive_help_id => 'configureServices',
-			      }) or return $l, $on_services; #- no change on cancel.
-    [ grep { $services{$_} } @$l ];
-}
-
-sub ask_standalone_gtk {
-    my ($_in) = @_;
-    my ($l, $on_services) = services();
-    my @xinetd_services = map { $_->[0] } @{(services_raw())[1]};
-
-    require ugtk2;
-    ugtk2->import(qw(:wrappers :create));
-
-    my $W = ugtk2->new(N("Services"));
-    my ($x, $y, $w_popup);
-    my $nopop = sub { $w_popup and $w_popup->destroy; undef $w_popup };
-    my $display = sub { 
-	my ($text) = @_;
-	$nopop->(); 
-	gtkshow(gtkadd($w_popup = Gtk2::Window->new('popup'),
-		       gtksignal_connect(gtkadd(Gtk2::EventBox->new,
-						gtkadd(gtkset_shadow_type(Gtk2::Frame->new, 'etched_out'),
-						       gtkset_justify(Gtk2::Label->new($text), 'left'))),
-					 button_press_event => sub { $nopop->() }
-					)))->move($x, $y) if $text;
-    };
-    my $update_service = sub {
-	my ($service, $label) = @_;
-	my $started = -e "/var/lock/subsys/$service";
-	$label->set_label($started ? N("running") : N("stopped"));
-    };
-    my $b = Gtk2::EventBox->new;
-    $b->set_events('pointer_motion_mask');
-    gtkadd($W->{window}, gtkadd($b, gtkpack_($W->create_box_with_title(N("Services and daemons")),
-	1, gtkset_size_request(create_scrolled_window(create_packtable({ col_spacings => 10, row_spacings => 3 },
-	    map {
-                my $service = $_;
-		my $is_xinetd_service = member($service, @xinetd_services);
-        	my $infos = warp_text(description($_), 40);
-                $infos ||= N("No additional information\nabout this service, sorry.");
-		my $label = gtkset_justify(Gtk2::Label->new, 'left');
-                $update_service->($service, $label) if !$is_xinetd_service;
-		[ gtkpack__(Gtk2::HBox->new(0,0), $_),
-		  gtkpack__(Gtk2::HBox->new(0,0), $label),
-		  gtkpack__(Gtk2::HBox->new(0,0), gtksignal_connect(Gtk2::Button->new(N("Info")), clicked => sub { $display->($infos) })),
-
-                  gtkpack__(Gtk2::HBox->new(0,0), gtkset_active(gtksignal_connect(
-                          Gtk2::CheckButton->new($is_xinetd_service ? N("Start when requested") : N("On boot")),
-                          clicked => sub { if ($_[0]->get_active) {
-                                               push @$on_services, $service if !member($service, @$on_services);
-                                           } else {
-                                               @$on_services = grep { $_ ne $service } @$on_services;
-                                        } }), member($service, @$on_services))),
-		  map { 
-		      my $a = $_;
-		      gtkpack__(Gtk2::HBox->new(0,0), gtksignal_connect(Gtk2::Button->new(translate($a)),
-                          clicked => sub { 
-			      my $action = $a eq "Start" ? 'restart' : 'stop'; 
-			      # as we need the output in UTF-8, force it
-			      local $_ = `GP_LANG="UTF-8" service $service $action 2>&1`; s/\033\[[^mG]*[mG]//g;
-			      c::set_tagged_utf8($_);
-			      $update_service->($service, $label);
-			      $display->($_);
-			  })) if !$is_xinetd_service;
-		  } (N_("Start"), N_("Stop"))
-		];
-	    }
-            @$l), [ $::isEmbedded ? 'automatic' : 'never', 'automatic' ]), -1, $::isEmbedded ? -1 : 400),
-            0, gtkpack(gtkset_border_width(Gtk2::HBox->new(0,0),5), $W->create_okcancel)
-            ))
-	  );
-    $b->signal_connect(motion_notify_event => sub { my ($w, $e) = @_;
-						    my ($ox, $oy) = $w->window->get_origin;
-						    $x = $e->x+$ox; $y = $e->y+$oy });
-    $b->signal_connect(button_press_event => sub { $nopop->() });
-    $::isEmbedded and gtkflush();
-    $W->main or return;
-    $on_services;
-}
-
-sub ask {    
-    my ($in) = @_;
-    !$::isInstall && $in->isa('interactive::gtk') ? &ask_standalone_gtk : &ask_install;
-}
-
-sub doit {
-    my ($in, $on_services) = @_;
-    my ($l, $was_on_services) = services();
-
-    foreach (@$l) {
-	my $before = member($_, @$was_on_services);
-	my $after = member($_, @$on_services);
-	if ($before != $after) {
-	    my $script = "/etc/rc.d/init.d/$_";
-	    run_program::rooted($::prefix, "chkconfig", $after ? "--add" : "--del", $_);
-	    if ($after && cat_("$::prefix$script") =~ /^#\s+chkconfig:\s+-/m) {
-		run_program::rooted($::prefix, "chkconfig", "--level", "35", $_, "on");
-	    }
-	    if (!$after && !$::isInstall && !$in->isa('interactive::gtk')) {
-		#- only done after install AND when not using the gtk frontend (since it allows one to start/stop services)
-		#- this allows to skip stopping service "dm"
-		run_program::rooted($::prefix, $script, "stop");
-	    }
-	}
-    }
-}
-
-sub services_raw() {
-    local $ENV{LANGUAGE} = 'C';
-    my (@services, @xinetd_services);
-    foreach (run_program::rooted_get_stdout($::prefix, '/sbin/chkconfig', '--list')) {
-	if (my ($xinetd_name, $on_off) = m!^\t(\S+):\s*(on|off)!) {
-	    push @xinetd_services, [ $xinetd_name, $on_off eq 'on' ];
-	} elsif (my ($name, $l) = m!^(\S+)\s+(0:(on|off).*)!) {
-	    push @services, [ $name, [ $l =~ /(\d+):on/g ] ];
-	}
-    }
-    \@services, \@xinetd_services;
-}
-
-#- returns: 
-#--- the listref of installed services
-#--- the listref of "on" services
-sub services() {
-    my ($services, $xinetd_services) = services_raw();
-    my @l = @$xinetd_services;
-    if ($::isInstall) {
-        push @l, map { [ $_->[0], @{$_->[1]} > 0 ] } @$services;
-    } else {
-        my $runlevel = (split " ", `/sbin/runlevel`)[1];
-        push @l, map { [ $_->[0], member($runlevel, @{$_->[1]}) ] } @$services;
-    }
-    @l = sort { $a->[0] cmp $b->[0] } @l;
-    [ map { $_->[0] } @l ], [ map { $_->[0] } grep { $_->[1] } @l ];
-}
-
-
-
-
-
-
-# the following functions are mostly by printer related modules
-
-sub service_exists {
-    my ($service) = @_;
-    -x "$::prefix/etc/rc.d/init.d/$service";
-}
-
-sub restart ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    service_exists($service) or return 1;
-    run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", "restart");
-}
-
-sub restart_or_start ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    service_exists($service) or return 1;
-    is_service_running($service) ?
-      run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", "restart") :
-      run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", "start");
-}
-
-sub start ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    service_exists($service) or return 1;
-    run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", "start");
-}
-
-sub start_not_running_service ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    service_exists($service) or return 1;
-    is_service_running($service) || run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", "start");
-}
-
-sub stop ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    service_exists($service) or return 1;
-    run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", "stop");
-}
-
-sub is_service_running ($) {
-    my ($service) = @_;
-    # Exit silently if the service is not installed
-    service_exists($service) or return 1;
-    run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", '>', '/dev/null', '2>', '/dev/null', "status");
-}
-
-sub starts_on_boot {
-    my ($service) = @_;
-    my (undef, $on_services) = services();
-    member($service, @$on_services);
-}
-
-sub start_service_on_boot ($) {
-    my ($service) = @_;
-    run_program::rooted($::prefix, "/sbin/chkconfig", "--add", $service);
-}
-
-sub do_not_start_service_on_boot ($) {
-    my ($service) = @_;
-    run_program::rooted($::prefix, "/sbin/chkconfig", "--del", $service);
-}
-
-sub set_status {
-    my ($service, $enable, $o_dont_apply) = @_;
-    if ($enable) {
-	services::start_service_on_boot($service);
-	services::restart_or_start($service) unless $o_dont_apply;
-    } else {
-	services::do_not_start_service_on_boot($service);
-	services::stop($service) unless $o_dont_apply;
-    }
-}
-
-1;
diff --git a/perl-install/share/.cvsignore b/perl-install/share/.cvsignore
deleted file mode 100644
index 4173dc671..000000000
--- a/perl-install/share/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-locales.tar.bz2
-locales-*-drakx.tar.bz2
diff --git a/perl-install/share/advertising/01.pl b/perl-install/share/advertising/01.pl
deleted file mode 100644
index 80ea97273..000000000
--- a/perl-install/share/advertising/01.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>What is Mandriva Linux?</b>"), center => 1 ],
-         ' ',
-	 N("Welcome to <b>Mandriva Linux</b>!"),
-		 ' ',
-         N("Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the system, called the <b>operating system</b> (based on the Linux kernel) together with <b>a lot of applications</b> meeting every need you could even think of."),
-         ' ',
-         N("Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It is also one of the <b>most widely used</b> Linux distributions worldwide!"));
diff --git a/perl-install/share/advertising/01.png b/perl-install/share/advertising/01.png
deleted file mode 100644
index 707855067..000000000
--- a/perl-install/share/advertising/01.png
+++ /dev/null
diff --git a/perl-install/share/advertising/02.pl b/perl-install/share/advertising/02.pl
deleted file mode 100644
index 39acc4f07..000000000
--- a/perl-install/share/advertising/02.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Open Source</b>"), center => 1 ],
-         ' ',
-	 N("Welcome to the <b>world of open source</b>!"),
-		 ' ',
-         N("Mandriva Linux is committed to the open source model. This means that this new release is the result of <b>collaboration</b> between <b>Mandriva's team of developers</b> and the <b>worldwide community</b> of Mandriva Linux contributors."),
-         ' ',
-         N("We would like to <b>thank</b> everyone who participated in the development of this latest release."));
diff --git a/perl-install/share/advertising/02.png b/perl-install/share/advertising/02.png
deleted file mode 100644
index 2dabe0f26..000000000
--- a/perl-install/share/advertising/02.png
+++ /dev/null
diff --git a/perl-install/share/advertising/03.pl b/perl-install/share/advertising/03.pl
deleted file mode 100644
index db196895f..000000000
--- a/perl-install/share/advertising/03.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>The GPL</b>"), center => 1 ],
-         ' ',
-	 N("Most of the software included in the distribution and all of the Mandriva Linux tools are licensed under the <b>General Public License</b>."),
-		 ' ',
-         N("The GPL is at the heart of the open source model; it grants everyone the <b>freedom</b> to use, study, distribute and improve the software any way they want, provided they make the results available."),
-         ' ',
-         N("The main benefit of this is that the number of developers is virtually <b>unlimited</b>, resulting in <b>very high quality</b> software."));
diff --git a/perl-install/share/advertising/03.png b/perl-install/share/advertising/03.png
deleted file mode 100644
index 320b455fc..000000000
--- a/perl-install/share/advertising/03.png
+++ /dev/null
diff --git a/perl-install/share/advertising/04.pl b/perl-install/share/advertising/04.pl
deleted file mode 100644
index f24a655a3..000000000
--- a/perl-install/share/advertising/04.pl
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Join the Community</b>"), center => 1 ],
-         ' ',
-	 N("Mandriva Linux has one of the <b>biggest communities</b> of users and developers. The role of such a community is very wide, ranging from bug reporting to the development of new applications. The community plays a <b>key role</b> in the Mandriva Linux world."),
-		 ' ',
-         N("To <b>learn more</b> about our dynamic community, please visit <b>www.mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel.php3</b> if you would like to get <b>involved</b> in the development."));
diff --git a/perl-install/share/advertising/04.png b/perl-install/share/advertising/04.png
deleted file mode 100644
index 776549a4a..000000000
--- a/perl-install/share/advertising/04.png
+++ /dev/null
diff --git a/perl-install/share/advertising/05.pl b/perl-install/share/advertising/05.pl
deleted file mode 100644
index ccfe50956..000000000
--- a/perl-install/share/advertising/05.pl
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/usr/bin/perl
-
-use utf8;
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Download Version</b>"), center => 1 ],
-         ' ',
-	 N("You are now installing <b>Mandriva Linux Download</b>. This is the free version that Mandriva wants to keep <b>available to everyone</b>."),
-		 ' ',
-         N("The Download version <b>cannot include</b> all the software that is not open source. Therefore, you will not find in the Download version:"),
-	 N("	* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."),
-	 N("	* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, Flash™, etc.)."),
-	 ' ',
-	 N("You will not have access to the <b>services included</b> in the other Mandriva products either."));
diff --git a/perl-install/share/advertising/05.png b/perl-install/share/advertising/05.png
deleted file mode 100644
index 72b44bff0..000000000
--- a/perl-install/share/advertising/05.png
+++ /dev/null
diff --git a/perl-install/share/advertising/06.pl b/perl-install/share/advertising/06.pl
deleted file mode 100644
index 49daf9f9f..000000000
--- a/perl-install/share/advertising/06.pl
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Discovery, Your First Linux Desktop</b>"), center => 1 ],
-         ' ',
-	 N("You are now installing <b>Mandriva Linux Discovery</b>."),
-		 ' ',
-         N("Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux distribution. It includes a hand-picked selection of <b>premium software</b> for office, multimedia and Internet activities. Its menu is task-oriented, with a single application per task."));
diff --git a/perl-install/share/advertising/06.png b/perl-install/share/advertising/06.png
deleted file mode 100644
index 9365284b7..000000000
--- a/perl-install/share/advertising/06.png
+++ /dev/null
diff --git a/perl-install/share/advertising/07.pl b/perl-install/share/advertising/07.pl
deleted file mode 100644
index 8553e3d73..000000000
--- a/perl-install/share/advertising/07.pl
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>PowerPack, The Ultimate Linux Desktop</b>"), center => 1 ],
-	' ',
-	N("You are now installing <b>Mandriva Linux PowerPack</b>."),
-	' ',
-	N("PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack includes <b>thousands of applications</b> - everything from the most popular to the most advanced."));
diff --git a/perl-install/share/advertising/07.png b/perl-install/share/advertising/07.png
deleted file mode 100644
index a82efd107..000000000
--- a/perl-install/share/advertising/07.png
+++ /dev/null
diff --git a/perl-install/share/advertising/08.pl b/perl-install/share/advertising/08.pl
deleted file mode 100644
index c041aeb7a..000000000
--- a/perl-install/share/advertising/08.pl
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"), center => 1 ],
-	' ',
-	N("You are now installing <b>Mandriva Linux PowerPack+</b>."),
-	' ',
-	N("PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop applications</b> and a comprehensive selection of world-class <b>server applications</b>."));
diff --git a/perl-install/share/advertising/08.png b/perl-install/share/advertising/08.png
deleted file mode 100644
index 0d425946c..000000000
--- a/perl-install/share/advertising/08.png
+++ /dev/null
diff --git a/perl-install/share/advertising/09.pl b/perl-install/share/advertising/09.pl
deleted file mode 100644
index e336c8544..000000000
--- a/perl-install/share/advertising/09.pl
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Mandriva Products</b>"), center => 1 ],
-	' ',
-	N("<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."),
-	' ',
-	N("The Mandriva Linux products are:"),
-	N("	* <b>Discovery</b>, Your First Linux Desktop."),
-	N("	* <b>PowerPack</b>, The Ultimate Linux Desktop."),
-	N("	* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."),
-	N("	* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making the most of your 64-bit processor."));
diff --git a/perl-install/share/advertising/09.png b/perl-install/share/advertising/09.png
deleted file mode 100644
index e44c14e3f..000000000
--- a/perl-install/share/advertising/09.png
+++ /dev/null
diff --git a/perl-install/share/advertising/10.pl b/perl-install/share/advertising/10.pl
deleted file mode 100644
index 95f2453ec..000000000
--- a/perl-install/share/advertising/10.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-use utf8;
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Mandriva Products (Nomad Products)</b>"), center => 1 ],
-	' ',
-	N("Mandriva has developed two products that allow you to use Mandriva Linux <b>on any computer</b> and without any need to actually install it:"),
-	N("	* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a bootable CD-ROM."),
-	N("	* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the ultra-compact “LaCie Mobile Hard Drive”."));
diff --git a/perl-install/share/advertising/10.png b/perl-install/share/advertising/10.png
deleted file mode 100644
index ab7e75a1f..000000000
--- a/perl-install/share/advertising/10.png
+++ /dev/null
diff --git a/perl-install/share/advertising/11.pl b/perl-install/share/advertising/11.pl
deleted file mode 100644
index 8a9fdd53f..000000000
--- a/perl-install/share/advertising/11.pl
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Mandriva Products (Professional Solutions)</b>"), center => 1 ],
-	' ',
-	N("Below are the Mandriva products designed to meet the <b>professional needs</b>:"),
-	N("	* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."),
-	N("	* <b>Corporate Server</b>, The Mandriva Linux Server Solution."),
-	N("	* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."));
diff --git a/perl-install/share/advertising/11.png b/perl-install/share/advertising/11.png
deleted file mode 100644
index 4a560406f..000000000
--- a/perl-install/share/advertising/11.png
+++ /dev/null
diff --git a/perl-install/share/advertising/12.pl b/perl-install/share/advertising/12.pl
deleted file mode 100644
index f9e56e2f8..000000000
--- a/perl-install/share/advertising/12.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>The KDE Choice</b>"), center => 1 ],
-	' ',
-	N("With your Discovery, you will be introduced to <b>KDE</b>, the most advanced and user-friendly <b>graphical desktop environment</b> available."),
-	' ',
-	N("KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you will not ever think of running another operating system!"),
-	' ',
-	N("KDE also includes a lot of <b>well integrated applications</b> such as Konqueror, the web browser and Kontact, the personal information manager."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/12.png b/perl-install/share/advertising/12.png
deleted file mode 100644
index 601f9d711..000000000
--- a/perl-install/share/advertising/12.png
+++ /dev/null
diff --git a/perl-install/share/advertising/13-a.pl b/perl-install/share/advertising/13-a.pl
deleted file mode 100644
index a863cec0e..000000000
--- a/perl-install/share/advertising/13-a.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Choose your Favorite Desktop Environment</b>"), center => 1 ],
-	' ',
-	N("With PowerPack, you will have the choice of the <b>graphical desktop environment</b>. Mandriva has chosen <b>KDE</b> as the default one."),
-	' ',
-	N("KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical desktop environment available. It includes a lot of integrated applications."),
-	' ',
-	N("But we advise you to try all available ones (including <b>GNOME</b>, <b>IceWM</b>, etc.) and pick your favorite."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/13-a.png b/perl-install/share/advertising/13-a.png
deleted file mode 100644
index 87e3ba254..000000000
--- a/perl-install/share/advertising/13-a.png
+++ /dev/null
diff --git a/perl-install/share/advertising/13-b.pl b/perl-install/share/advertising/13-b.pl
deleted file mode 100644
index 72e42206d..000000000
--- a/perl-install/share/advertising/13-b.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Choose your Favorite Desktop Environment</b>"), center => 1 ],
-	' ',
-	N("With PowerPack+, you will have the choice of the <b>graphical desktop environment</b>. Mandriva has chosen <b>KDE</b> as the default one."),
-	' ',
-	N("KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical desktop environment available. It includes a lot of integrated applications."),
-	' ',
-	N("But we advise you to try all available ones (including <b>GNOME</b>, <b>IceWM</b>, etc.) and pick your favorite."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/13-b.png b/perl-install/share/advertising/13-b.png
deleted file mode 100644
index 87e3ba254..000000000
--- a/perl-install/share/advertising/13-b.png
+++ /dev/null
diff --git a/perl-install/share/advertising/14.pl b/perl-install/share/advertising/14.pl
deleted file mode 100644
index c886c1094..000000000
--- a/perl-install/share/advertising/14.pl
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/usr/bin/perl
-
-use utf8;
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>OpenOffice.org</b>"), center => 1 ],
-	' ',
-	N("With Discovery, you will discover <b>OpenOffice.org</b>."),
-	' ',
-	N("It is a <b>full-featured office suite</b> that includes word processor, spreadsheet, presentation and drawing applications."),
-	' ',
-	N("OpenOffice.org can read and write most types of <b>Microsoft® Office</b> documents such as Word, Excel and PowerPoint® files."));
diff --git a/perl-install/share/advertising/14.png b/perl-install/share/advertising/14.png
deleted file mode 100644
index 3bc327ed7..000000000
--- a/perl-install/share/advertising/14.png
+++ /dev/null
diff --git a/perl-install/share/advertising/15.pl b/perl-install/share/advertising/15.pl
deleted file mode 100644
index 1b25456b1..000000000
--- a/perl-install/share/advertising/15.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Kontact</b>"), center => 1 ],
-	' ',
-	N("Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."),
-	' ',
-	N("More than just a full-featured <b>e-mail client</b>, Kontact also includes an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</b>!"),
-	' ',
-	N("It is the easiest way to communicate with your contacts and to organize your time."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/15.png b/perl-install/share/advertising/15.png
deleted file mode 100644
index 601ed7c3e..000000000
--- a/perl-install/share/advertising/15.png
+++ /dev/null
diff --git a/perl-install/share/advertising/16.pl b/perl-install/share/advertising/16.pl
deleted file mode 100644
index 391e0b890..000000000
--- a/perl-install/share/advertising/16.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Surf the Internet</b>"), center => 1 ],
-	' ',
-	N("Discovery will give you access to <b>every Internet resource</b>:"),
-	N("	* Browse the <b>Web</b> with Konqueror."),
-	N("	* <b>Chat</b> online with your friends using Kopete."),
-	N("	* <b>Transfer</b> files with KBear."),
-	N("	* ..."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/16.png b/perl-install/share/advertising/16.png
deleted file mode 100644
index 6cabb3581..000000000
--- a/perl-install/share/advertising/16.png
+++ /dev/null
diff --git a/perl-install/share/advertising/17.pl b/perl-install/share/advertising/17.pl
deleted file mode 100644
index 5de1ec42e..000000000
--- a/perl-install/share/advertising/17.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Enjoy our Multimedia Features</b>"), center => 1 ],
-	' ',
-	N("Discovery will also make <b>multimedia</b> very easy for you:"),
-	N("	* Watch your favorite <b>videos</b> with Kaffeine."),
-	N("	* Listen to your <b>music files</b> with amaroK."),
-	N("	* Edit and create <b>images</b> with the GIMP."),
-	N("	* ..."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/17.png b/perl-install/share/advertising/17.png
deleted file mode 100644
index 69bd797fb..000000000
--- a/perl-install/share/advertising/17.png
+++ /dev/null
diff --git a/perl-install/share/advertising/18.pl b/perl-install/share/advertising/18.pl
deleted file mode 100644
index 845af3f0d..000000000
--- a/perl-install/share/advertising/18.pl
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Enjoy the Wide Range of Applications</b>"), center => 1 ],
-	' ',
-	N("In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for <b>all of your tasks</b>:"),
-	N("	* Create, edit and share office documents with <b>OpenOffice.org</b>."),
-	N("	* Manage your personal data with the integrated personal information suites <b>Kontact</b> and <b>Evolution</b>."),
-	N("	* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."),
-	N("	* Participate in online chat with <b>Kopete</b>."),
-	N("	* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your <b>videos</b>."),
-	N("	* Edit and create images with the <b>GIMP</b>."),
-	N("	* ..."));
diff --git a/perl-install/share/advertising/18.png b/perl-install/share/advertising/18.png
deleted file mode 100644
index b45eea4bd..000000000
--- a/perl-install/share/advertising/18.png
+++ /dev/null
diff --git a/perl-install/share/advertising/19.pl b/perl-install/share/advertising/19.pl
deleted file mode 100644
index f07fb5ba9..000000000
--- a/perl-install/share/advertising/19.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Development Environments</b>"), center => 1 ],
-	' ',
-	N("PowerPack gives you the best tools to <b>develop</b> your own applications."),
-	' ',
-	N("You will enjoy the powerful, integrated development environment from KDE, <b>KDevelop</b>, which will let you program in a lot of languages."),
-	' ',
-	N("PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</b>, the associated debugger."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/19.png b/perl-install/share/advertising/19.png
deleted file mode 100644
index 889646e63..000000000
--- a/perl-install/share/advertising/19.png
+++ /dev/null
diff --git a/perl-install/share/advertising/20.pl b/perl-install/share/advertising/20.pl
deleted file mode 100644
index aef0fce18..000000000
--- a/perl-install/share/advertising/20.pl
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Development Editors</b>"), center => 1 ],
-	' ',
-	N("PowerPack will let you choose between those <b>popular editors</b>:"),
-	N("	* <b>Emacs</b>: a customizable and real time display editor."),
-	N("	* <b>XEmacs</b>: another open source text editor and application development system."),
-	N("	* <b>Vim</b>: an advanced text editor with more features than standard Vi."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/20.png b/perl-install/share/advertising/20.png
deleted file mode 100644
index d172e06f7..000000000
--- a/perl-install/share/advertising/20.png
+++ /dev/null
diff --git a/perl-install/share/advertising/21.pl b/perl-install/share/advertising/21.pl
deleted file mode 100644
index 6bbc66812..000000000
--- a/perl-install/share/advertising/21.pl
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/usr/bin/perl
-
-use utf8;
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Development Languages</b>"), center => 1 ],
-	' ',
-	N("With all these <b>powerful tools</b>, you will be able to write applications in <b>dozens of programming languages</b>:"),
-	N("	* The famous <b>C language</b>."),
-	N("	* Object oriented languages:"),
-	N("		* <b>C++</b>"),
-	N("		* <b>Java™</b>"),
-	N("	* Scripting languages:"),
-	N("		* <b>Perl</b>"),
-	N("		* <b>Python</b>"),
-	N("	* And many more."));
diff --git a/perl-install/share/advertising/21.png b/perl-install/share/advertising/21.png
deleted file mode 100644
index e4577fc0a..000000000
--- a/perl-install/share/advertising/21.png
+++ /dev/null
diff --git a/perl-install/share/advertising/22.pl b/perl-install/share/advertising/22.pl
deleted file mode 100644
index 450ded214..000000000
--- a/perl-install/share/advertising/22.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-use utf8;
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Development Tools</b>"), center => 1 ],
-	' ',
-	N("PowerPack gives you the best tools to <b>develop</b> your own applications."),
-	' ',
-	N("With the powerful integrated development environment <b>KDevelop</b> and the leading Linux compiler <b>GCC</b>, you will be able to create applications in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."));
diff --git a/perl-install/share/advertising/22.png b/perl-install/share/advertising/22.png
deleted file mode 100644
index 8177adae6..000000000
--- a/perl-install/share/advertising/22.png
+++ /dev/null
diff --git a/perl-install/share/advertising/23.pl b/perl-install/share/advertising/23.pl
deleted file mode 100644
index fe0a07b79..000000000
--- a/perl-install/share/advertising/23.pl
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Groupware Server</b>"), center => 1 ],
-	' ',
-	N("PowerPack+ will give you access to <b>Kolab</b>, a full-featured <b>groupware server</b> which will, thanks to the client <b>Kontact</b>, allow you to:"),
-	N("	* Send and receive your <b>e-mails</b>."),
-	N("	* Share your <b>agendas</b> and your <b>address books</b>."),
-	N("	* Manage your <b>memos</b> and <b>task lists</b>."));
\ No newline at end of file
diff --git a/perl-install/share/advertising/23.png b/perl-install/share/advertising/23.png
deleted file mode 100644
index 97bcba2b6..000000000
--- a/perl-install/share/advertising/23.png
+++ /dev/null
diff --git a/perl-install/share/advertising/24.pl b/perl-install/share/advertising/24.pl
deleted file mode 100644
index 075b90d1b..000000000
--- a/perl-install/share/advertising/24.pl
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/usr/bin/perl
-
-use utf8;
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Servers</b>"), center => 1 ],
-	' ',
-	N("Empower your business network with <b>premier server solutions</b> including:"),
-	N("	* <b>Samba</b>: File and print services for Microsoft® Windows® clients."),
-	N("	* <b>Apache</b>: The most widely used web server."),
-	N("	* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source databases."),
-	N("	* <b>CVS</b>: Concurrent Versions System, the dominant open source network-transparent version control system."),
-	N("	* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."),
-	N("	* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail servers."));
diff --git a/perl-install/share/advertising/24.png b/perl-install/share/advertising/24.png
deleted file mode 100644
index bd1284a0f..000000000
--- a/perl-install/share/advertising/24.png
+++ /dev/null
diff --git a/perl-install/share/advertising/25.pl b/perl-install/share/advertising/25.pl
deleted file mode 100644
index 914f34f45..000000000
--- a/perl-install/share/advertising/25.pl
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Mandriva Linux Control Center</b>"), center => 1 ],
-	' ',
-	N("The <b>Mandriva Linux Control Center</b> is an essential collection of Mandriva Linux-specific utilities designed to simplify the configuration of your computer."),
-	' ',
-	N("You will immediately appreciate this collection of <b>more than 60</b> handy utilities for <b>easily configuring your system</b>: hardware devices, mount points, network and Internet, security level of your computer, etc."));
diff --git a/perl-install/share/advertising/25.png b/perl-install/share/advertising/25.png
deleted file mode 100644
index 5a32a04c1..000000000
--- a/perl-install/share/advertising/25.png
+++ /dev/null
diff --git a/perl-install/share/advertising/26.pl b/perl-install/share/advertising/26.pl
deleted file mode 100644
index 730d08868..000000000
--- a/perl-install/share/advertising/26.pl
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>The Open Source Model</b>"), center => 1 ],
-	' ',
-	N("Like all computer programming, open source software <b>requires time and people</b> for development. In order to respect the open source philosophy, Mandriva sells added value products and services to <b>keep improving Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> and the development of Mandriva Linux, <b>please</b> consider buying one of our products or services!"));
diff --git a/perl-install/share/advertising/26.png b/perl-install/share/advertising/26.png
deleted file mode 100644
index 76f6cc877..000000000
--- a/perl-install/share/advertising/26.png
+++ /dev/null
diff --git a/perl-install/share/advertising/27.pl b/perl-install/share/advertising/27.pl
deleted file mode 100644
index 9a89fa3c5..000000000
--- a/perl-install/share/advertising/27.pl
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Online Store</b>"), center => 1 ],
-	' ',
-	N("To learn more about Mandriva products and services, you can visit our <b>e-commerce platform</b>."),
-	' ',
-	N("There you can find all our products, services and third-party products."),
-	' ',
-	N("This platform has just been <b>redesigned</b> to improve its efficiency and usability."),
-	' ',
-	[ N("Stop by today at <b>store.mandriva.com</b>!"), center => 1 ]);
diff --git a/perl-install/share/advertising/27.png b/perl-install/share/advertising/27.png
deleted file mode 100644
index ce0b3eb1f..000000000
--- a/perl-install/share/advertising/27.png
+++ /dev/null
diff --git a/perl-install/share/advertising/28.pl b/perl-install/share/advertising/28.pl
deleted file mode 100644
index 407016442..000000000
--- a/perl-install/share/advertising/28.pl
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/usr/bin/perl
-
-use utf8;
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Mandriva Club</b>"), center => 1 ],
-	' ',
-	N("<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux product.."),
-	' ',
-	N("Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"),
-	N("	* <b>Special discounts</b> on products and services of our online store <b>store.mandriva.com</b>."),
-	N("	* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ drivers)."),
-	N("	* Participation in Mandriva Linux <b>user forums</b>."),
-	N("	* <b>Early and privileged access</b>, before public release, to Mandriva Linux <b>ISO images</b>."),
-	N("	* And many more."));
diff --git a/perl-install/share/advertising/28.png b/perl-install/share/advertising/28.png
deleted file mode 100644
index 0b2ff6a4b..000000000
--- a/perl-install/share/advertising/28.png
+++ /dev/null
diff --git a/perl-install/share/advertising/29.pl b/perl-install/share/advertising/29.pl
deleted file mode 100644
index 82db30101..000000000
--- a/perl-install/share/advertising/29.pl
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Mandriva Online</b>"), center => 1 ],
-	' ',
-	N("<b>Mandriva Online</b> is a new premium service that Mandriva is proud to offer its customers!"),
-	' ',
-	N("Mandriva Online provides a wide range of valuable services for <b>easily updating</b> your Mandriva Linux systems:"),
-	N("	* <b>Perfect</b> system security (automated software updates)."),
-	N("	* <b>Notification</b> of updates (by e-mail or by an applet on the desktop)."),
-	N("	* Flexible <b>scheduled</b> updates."),
-	N("	* Management of <b>all your Mandriva Linux systems</b> with one account."));
diff --git a/perl-install/share/advertising/29.png b/perl-install/share/advertising/29.png
deleted file mode 100644
index a9d9bfbda..000000000
--- a/perl-install/share/advertising/29.png
+++ /dev/null
diff --git a/perl-install/share/advertising/30.pl b/perl-install/share/advertising/30.pl
deleted file mode 100644
index f0fe6c1c3..000000000
--- a/perl-install/share/advertising/30.pl
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 10;
-$border = 10;  #- for leftish text
-
-# Use <b>text</b> for bold
-
-# @text = ([ N("text to display"), center => 1 ],
-
-@text = ([ N("<b>Mandriva Expert</b>"), center => 1 ],
-	' ',
-	N("Do you require <b>assistance?</b> Meet Mandriva's technical experts on <b>our technical support platform</b> www.mandrivaexpert.com."),
-	' ',
-	N("Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save a lot of time."),
-	' ',
-	N("For any question related to Mandriva Linux, you have the possibility to purchase support incidents at <b>store.mandriva.com</b>."));
diff --git a/perl-install/share/advertising/30.png b/perl-install/share/advertising/30.png
deleted file mode 100644
index 1bc9462ac..000000000
--- a/perl-install/share/advertising/30.png
+++ /dev/null
diff --git a/perl-install/share/advertising/Makefile b/perl-install/share/advertising/Makefile
deleted file mode 100644
index c9313c3aa..000000000
--- a/perl-install/share/advertising/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-include ../../../Makefile.config
-
-PRODUCT = dwd
-DESTDIR = $(EXTRA_INSTALL_DEST)/advertising
-
-install:
-	rm -rf $(DESTDIR)
-	install -d $(DESTDIR)
-	install -m755 `cat list-$(PRODUCT) | sed 's/png$$/pl/'` $(DESTDIR)
-	install -m644 `cat list-$(PRODUCT)` $(DESTDIR)
-	install -m644 list-$(PRODUCT) $(DESTDIR)/list
diff --git a/perl-install/share/advertising/README b/perl-install/share/advertising/README
deleted file mode 100644
index 58d63c2e3..000000000
--- a/perl-install/share/advertising/README
+++ /dev/null
@@ -1,4 +0,0 @@
-dis == Discovery
-dwd == Download
-ppp == PowerPackPlus
-pwp == PowerPack
diff --git a/perl-install/share/advertising/list-dis b/perl-install/share/advertising/list-dis
deleted file mode 100644
index 9f6796747..000000000
--- a/perl-install/share/advertising/list-dis
+++ /dev/null
@@ -1,14 +0,0 @@
-01.png
-02.png
-06.png
-12.png
-14.png
-15.png
-16.png
-17.png
-25.png
-27.png
-28.png
-29.png
-30.png
-lpi.png
diff --git a/perl-install/share/advertising/list-dwd b/perl-install/share/advertising/list-dwd
deleted file mode 100644
index e3ceb36a9..000000000
--- a/perl-install/share/advertising/list-dwd
+++ /dev/null
@@ -1,14 +0,0 @@
-01.png
-02.png
-03.png
-04.png
-05.png
-09.png
-10.png
-11.png
-26.png
-27.png
-28.png
-29.png
-30.png
-lpi.png
diff --git a/perl-install/share/advertising/list-ppp b/perl-install/share/advertising/list-ppp
deleted file mode 100644
index 30734ff73..000000000
--- a/perl-install/share/advertising/list-ppp
+++ /dev/null
@@ -1,14 +0,0 @@
-01.png
-02.png
-08.png
-13-b.png
-18.png
-22.png
-23.png
-24.png
-25.png
-27.png
-28.png
-29.png
-30.png
-lpi.png
diff --git a/perl-install/share/advertising/list-pwp b/perl-install/share/advertising/list-pwp
deleted file mode 100644
index b42b7bb27..000000000
--- a/perl-install/share/advertising/list-pwp
+++ /dev/null
@@ -1,14 +0,0 @@
-01.png
-02.png
-07.png
-13-a.png
-18.png
-19.png
-20.png
-21.png
-25.png
-27.png
-28.png
-29.png
-30.png
-lpi.png
diff --git a/perl-install/share/advertising/lpi.pl b/perl-install/share/advertising/lpi.pl
deleted file mode 100644
index 2eb839368..000000000
--- a/perl-install/share/advertising/lpi.pl
+++ /dev/null
@@ -1,8 +0,0 @@
-#!/usr/bin/perl
-
-$width = 556;
-$height = 303;
-
-$y_start = 0;
-$border = 0;  #- for leftish text
-
diff --git a/perl-install/share/advertising/lpi.png b/perl-install/share/advertising/lpi.png
deleted file mode 100644
index f1396d2b5..000000000
--- a/perl-install/share/advertising/lpi.png
+++ /dev/null
diff --git a/perl-install/share/aliases b/perl-install/share/aliases
deleted file mode 100644
index a5ed9f2f2..000000000
--- a/perl-install/share/aliases
+++ /dev/null
@@ -1,8 +0,0 @@
-/bin/gunzip gzip
-/usr/bin/install2 perl-install/install2
-/usr/bin/commands perl-install/commands
-/usr/bin/runinstall2 install2
-/sbin/fsck.ext2 e2fsck
-/sbin/lsmod lsmod-25
-/sbin/rmmod rmmod-25
-/sbin/insmod_ insmod-25
diff --git a/perl-install/share/base.png b/perl-install/share/base.png
deleted file mode 100644
index c74fec0ff..000000000
--- a/perl-install/share/base.png
+++ /dev/null
diff --git a/perl-install/share/compssUsers.pl b/perl-install/share/compssUsers.pl
deleted file mode 100644
index 64e5373ca..000000000
--- a/perl-install/share/compssUsers.pl
+++ /dev/null
@@ -1,244 +0,0 @@
-package tmp::compssUsers;
-
-use common;
-use ugtk2 qw(:helpers :wrappers :create);
-
-my $meta_class = $::o->{meta_class};
-my $desktop = $meta_class eq 'desktop';
-my $powerpack = $meta_class eq 'powerpack';
-my $server = $meta_class eq 'server';
-
-my $h = {
-
-$desktop ? (
-"Discovery" => 
-[
-  { label => ("Discovery"),
-    descr => (""),
-    flags => [ qw(OFFICE SPELLCHECK PUBLISHING PIM ARCHIVING PRINTER AUDIO VIDEO GRAPHICS NETWORKING_WWW NETWORKING_MAIL NETWORKING_NEWS COMMUNICATIONS NETWORKING_CHAT NETWORKING_FILE_TRANSFER NETWORKING_IRC NETWORKING_INSTANT_MESSAGING NETWORKING_DNS CONFIG TERMINALS TEXT_TOOLS SHELLS FILE_TOOLS KDE X BOOKS) ], 
-    default_selected => 1,
-  },
-],
-) : (
-N_("Workstation") => 
-[
-  { label => N_("Office Workstation"),
-    descr => $server 
-        ? N_("Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets (OpenOffice.org Calc, Kspread), PDF viewers, etc")
-        : N_("Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"),
-    flags => [ qw(OFFICE SPELLCHECK PUBLISHING PIM ARCHIVING PRINTER) ],
-    default_selected => 1,
-  },
-  if_(!$server,
-  { label => N_("Game station"),
-    descr => N_("Amusement programs: arcade, boards, strategy, etc"),
-    flags => [ qw(GAMES) ], 
-  },
-  { label => N_("Multimedia station"),
-    descr => N_("Sound and video playing/editing programs"),
-    flags => [ qw(AUDIO VIDEO GRAPHICS) ],
-    default_selected => 1,
-  },
-  ),
-  { label => N_("Internet station"),
-    descr => N_("Set of tools to read and send mail and news (mutt, tin..) and to browse the Web"),
-    flags => [ qw(NETWORKING_WWW NETWORKING_MAIL NETWORKING_NEWS COMMUNICATIONS NETWORKING_CHAT NETWORKING_FILE_TRANSFER NETWORKING_IRC NETWORKING_INSTANT_MESSAGING NETWORKING_DNS) ],
-    default_selected => 1,
-  },
-  if_(!$server,
-  { label => N_("Network Computer (client)"),
-    descr => N_("Clients for different protocols including ssh"),
-    flags => [ qw(NETWORKING_REMOTE_ACCESS NETWORKING_FILE) ], 
-    default_selected => $powerpack,
-  },
-  { label => N_("Configuration"),
-    descr => N_("Tools to ease the configuration of your computer"),
-    flags => [ qw(CONFIG) ],
-    default_selected => 1,
-  },
-  { label => N_("Console Tools"),
-    descr => N_("Editors, shells, file tools, terminals"),
-    flags => [ qw(EDITORS TERMINALS TEXT_TOOLS SHELLS FILE_TOOLS) ],
-    default_selected => 1,
-  },
-  { label => N_("Development"),
-    descr => N_("C and C++ development libraries, programs and include files"),
-    flags => [ qw(DEVELOPMENT EDITORS) ],
-    default_selected => $powerpack,
-  },
-  { label => N_("Documentation"),
-    descr => N_("Books and Howto's on Linux and Free Software"),
-    flags => [ qw(BOOKS) ],
-    default_selected => $powerpack,
-  },
-  { label => N_("LSB"),
-    descr => N_("Linux Standard Base. Third party applications support"),
-    flags => [ qw(LSB) ],
-  },
-  ),
-],
-
-N_("Server") =>
-[
-  $server ? (
-  { label => N_("Web Server"),
-    descr => N_("Apache"),
-    flags => [ qw(NETWORKING_WWW_SERVER) ],
-  },
-  { label => N_("Groupware"),
-    descr => N_("Kolab Server"),
-    flags => [ qw(NETWORKING_GROUPWARE_SERVER) ],
-  },
-  { label => N_("Firewall/Router"),
-    descr => N_("Internet gateway"),
-    flags => [ qw(NETWORKING_FIREWALLING_SERVER) ],
-  },
-  { label => N_("Mail/News"),
-    descr => N_("Postfix mail server, Inn news server"),
-    flags => [ qw(NETWORKING_MAIL_SERVER NETWORKING_NEWS_SERVER) ],
-  },
-  { label => N_("Directory Server"),
-    descr => N_("LDAP Server"),
-    flags => [ qw(NETWORKING_LDAP_SERVER) ],
-  },
-  { label => N_("FTP Server"),
-    descr => N_("ProFTPd"),
-    flags => [ qw(NETWORKING_FILE_TRANSFER_SERVER) ],
-  },
-  { label => N_("DNS/NIS"),
-    descr => N_("Domain Name and Network Information Server"),
-    flags => [ qw(NIS_SERVER NETWORKING_DNS_SERVER) ],
-  },
-  { label => N_("File and Printer Sharing Server"),
-    descr => N_("NFS Server, Samba server"),
-    flags => [ qw(NETWORKING_FILE_SERVER PRINTER) ],
-  },
-  { label => N_("Database"),
-    descr => N_("PostgreSQL and MySQL Database Server"),
-    flags => [ qw(DATABASES DATABASES_SERVER) ],
-  },
-  ) : (
-  { label => N_("Web/FTP"),
-    descr => N_("Apache, Pro-ftpd"),
-    flags => [ qw(NETWORKING_WWW_SERVER NETWORKING_FILE_TRANSFER_SERVER) ],
-  },
-  { label => N_("Mail"),
-    descr => N_("Postfix mail server"),
-    flags => [ qw(NETWORKING_MAIL_SERVER) ],
-  },
-  { label => N_("Database"),
-    descr => N_("PostgreSQL or MySQL database server"),
-    flags => [ qw(DATABASES DATABASES_SERVER) ],
-  },
-  { label => N_("Firewall/Router"),
-    descr => N_("Internet gateway"),
-    flags => [ qw(NETWORKING_FIREWALLING_SERVER) ],
-  },
-  { label => N_("Network Computer server"),
-    descr => N_("NFS server, SMB server, Proxy server, ssh server"),
-    flags => [ qw(NETWORKING_FILE_SERVER NETWORKING_REMOTE_ACCESS_SERVER) ],
-  },
-  ),
-],
-
-N_("Graphical Environment") => 
-[
-  { label => N_("KDE Workstation"),
-    descr => N_("The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"),
-    flags => [ qw(KDE X ACCESSIBILITY) ],
-    default_selected => 1,
-  },
-  { label => N_("GNOME Workstation"),
-    descr => N_("A graphical environment with user-friendly set of applications and desktop tools"),
-    flags => [ qw(GNOME X ACCESSIBILITY) ], 
-  },
-  { label => N_("Other Graphical Desktops"),
-    descr => N_("Icewm, Window Maker, Enlightenment, Fvwm, etc"),
-    flags => [ qw(GRAPHICAL_DESKTOP X ACCESSIBILITY) ], 
-  },
-],
-
-if_($server,
-N_("Development") =>
-[ 
-  { label => N_("Development"),
-    descr => N_("C and C++ development libraries, programs and include files"),
-    flags => [ qw(DEVELOPMENT EDITORS) ],
-    default_selected => 1,
-  },
-  { label => N_("Documentation"),
-    descr => N_("Books and Howto's on Linux and Free Software"),
-    flags => [ qw(BOOKS) ],
-  },
-  { label => N_("LSB"),
-    descr => N_("Linux Standard Base. Third party applications support"),
-    flags => [ qw(LSB) ],
-  },
-],
-
-N_("Utilities") =>
-[
-  { label => N_("SSH Server"),
-    descr => N_("SSH Server"),
-    flags => [ qw(NETWORKING_REMOTE_ACCESS_SERVER) ],
-    default_selected => 1,
-  },
-  { label => N_("Webmin"),
-    descr => N_("Webmin Remote Configuration Server"),
-    flags => [ qw(WEBMIN) ],
-    default_selected => 1,
-  },
-  { label => N_("Network Utilities/Monitoring"),
-    descr => N_("Monitoring tools, processes accounting, tcpdump, nmap, ..."),
-    flags => [ qw(MONITORING NETWORKING_FILE) ],
-    default_selected => 1,
-  },
-  { label => N_("Mandriva Wizards"),
-    descr => N_("Wizards to configure server"),
-    flags => [ qw(WIZARDS) ],
-    default_selected => 1,
-  },
-],
-),
-),
-};
-
-foreach my $path (keys %$h) {
-    foreach (@{$h->{$path}}) {
-	$_->{path} = $path;
-	$_->{uid} = join('|', $path, $_->{label});
-    }
-}
-
-my $compssUsers = [ map { @$_ } values %$h ];
-
-my $gtk_display_compssUsers = sub {
-    my ($entry) = @_;
-
-    my $entries_in_path = sub {
-	my ($path) = @_;
-	translate($path), map { $entry->($_) } @{$h->{$path}};
-    };
-
-    gtkpack_(Gtk2::VBox->new(0, 0),
-	     1, gtkpack_(Gtk2::HBox->new(0, 0),
-			 1, gtkpack(Gtk2::VBox->new(0, 0), 
-				    $entries_in_path->('Workstation'),
-				    $server ? $entries_in_path->('Server') : (),
-				   ),
-			 0, gtkpack(Gtk2::VBox->new(0, 0),
-				    $server ? (
-				      $entries_in_path->('Graphical Environment'),
-				      $entries_in_path->('Development'),
-				      $entries_in_path->('Utilities'),
-				    ) : (
-				      $entries_in_path->('Server'),
-				      '',
-				      $entries_in_path->('Graphical Environment'),
-                                    ),
-				   ),
-			),
-	    );
-};
-
-$compssUsers, $gtk_display_compssUsers;
diff --git a/perl-install/share/consolefonts/Cyr_a8x16 b/perl-install/share/consolefonts/Cyr_a8x16
deleted file mode 100644
index a09ac03d8..000000000
--- a/perl-install/share/consolefonts/Cyr_a8x16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/lat0-sun16 b/perl-install/share/consolefonts/lat0-sun16
deleted file mode 100644
index 19e3d432e..000000000
--- a/perl-install/share/consolefonts/lat0-sun16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/lat2-sun16 b/perl-install/share/consolefonts/lat2-sun16
deleted file mode 100644
index 509e5def2..000000000
--- a/perl-install/share/consolefonts/lat2-sun16
+++ /dev/null
diff --git a/perl-install/share/consolefonts/ruscii_8x16 b/perl-install/share/consolefonts/ruscii_8x16
deleted file mode 100644
index b0513a9db..000000000
--- a/perl-install/share/consolefonts/ruscii_8x16
+++ /dev/null
diff --git a/perl-install/share/devices b/perl-install/share/devices
deleted file mode 100644
index dc314e28c..000000000
--- a/perl-install/share/devices
+++ /dev/null
@@ -1,18 +0,0 @@
-/dev/console c 5 1
-/dev/ttyS0 c 4 64
-/dev/null c 1 3
-/dev/mem c 1 1
-/dev/tty0 c 4 0
-/dev/tty1 c 4 1
-/dev/tty2 c 4 2
-/dev/tty3 c 4 3
-/dev/tty4 c 4 4
-/dev/tty5 c 4 5
-/dev/tty6 c 4 6
-/dev/tty7 c 4 7
-/dev/tty8 c 4 8
-/dev/fb0 c 29 0
-/dev/loop3 b 7 3
-/dev/ram3 b 1 3
-/dev/fd0 b 2 0
-/dev/ram b 1 1
diff --git a/perl-install/share/diskdrake.rc b/perl-install/share/diskdrake.rc
deleted file mode 100644
index a9a731b0d..000000000
--- a/perl-install/share/diskdrake.rc
+++ /dev/null
@@ -1,46 +0,0 @@
-style "font"
-{
-  fontset = "-*-*-medium-r-normal-*-8-*-*-*-*-*-iso8859-1,*-r-*"
-  xthickness = 1
-  ythickness = 1
-}
-
-style "red" = "font"
-{
-  bg[NORMAL] = { 1.0, 0, 0 }
-  bg[PRELIGHT] = { 0.9, 0, 0 }
-}
-style "darkred" = "font"
-{
-  bg[NORMAL] = { 0.7, 0, 0 }
-  bg[PRELIGHT] = { 0.6, 0, 0 }
-}
-style "green" = "font"
-{
-  bg[NORMAL] = { 0, 1.0, 0 }
-  bg[PRELIGHT] = { 0, 0.9, 0 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-style "blue" = "font"
-{
-  bg[NORMAL] = { 0, 0, 1.0 }
-  bg[PRELIGHT] = { 0, 0, 0.9 }
-}
-style "white" = "font"
-{
-  bg[NORMAL] = { 1.0, 1.0, 1.0 }
-  bg[PRELIGHT] = { 0.67, 0.67, 0.67 }
-  fg[NORMAL] = { 0, 0, 0 }
-}
-
-widget "*Linux*"      style "red" 
-widget "*Ext2*"       style "red" 
-widget "*Journalised FS*"   style "darkred" 
-widget "*Linux swap*" style "green"
-widget "*Swap*"       style "green"
-widget "*FAT*"        style "blue"
-widget "*Windows*"    style "blue"
-widget "*SunOS*"      style "blue"
-widget "*NTFS*"       style "blue"
-widget "*Empty*"      style "white"
-widget "*Other*"      style "font"
diff --git a/perl-install/share/floppy.png b/perl-install/share/floppy.png
deleted file mode 100644
index 2265e6ec6..000000000
--- a/perl-install/share/floppy.png
+++ /dev/null
diff --git a/perl-install/share/fonts.tar.bz2 b/perl-install/share/fonts.tar.bz2
deleted file mode 100644
index adf66befa..000000000
--- a/perl-install/share/fonts.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/ftin.png b/perl-install/share/ftin.png
deleted file mode 100644
index 3cec3c194..000000000
--- a/perl-install/share/ftin.png
+++ /dev/null
diff --git a/perl-install/share/ftout.png b/perl-install/share/ftout.png
deleted file mode 100644
index d821716eb..000000000
--- a/perl-install/share/ftout.png
+++ /dev/null
diff --git a/perl-install/share/help.png b/perl-install/share/help.png
deleted file mode 100644
index ddebe33ad..000000000
--- a/perl-install/share/help.png
+++ /dev/null
diff --git a/perl-install/share/installed.png b/perl-install/share/installed.png
deleted file mode 100644
index 10a032fd0..000000000
--- a/perl-install/share/installed.png
+++ /dev/null
diff --git a/perl-install/share/keyboards.tar.bz2 b/perl-install/share/keyboards.tar.bz2
deleted file mode 100644
index 9bb14eeea..000000000
--- a/perl-install/share/keyboards.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/keymaps.tar.bz2 b/perl-install/share/keymaps.tar.bz2
deleted file mode 100644
index 9ad7c852c..000000000
--- a/perl-install/share/keymaps.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/keymaps_generate b/perl-install/share/keymaps_generate
deleted file mode 100755
index 0265502c9..000000000
--- a/perl-install/share/keymaps_generate
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use keyboard;
-
-my $dir = "keymaps/usr/share/keymaps";
-system("rm -rf keymaps ; mkdir -p keymaps/usr/share/keymaps");
-
-foreach (keyboard::keyboards()) {
-    my $kmap = keyboard::keyboard2kmap($_);
-    if (system("./kmap2bkmap $kmap > $dir/$kmap.bkmap 2>/dev/null") != 0) {
-	warn "unknown kmap $kmap\n";
-	unlink "$dir/$kmap.bkmap";
-    }
-}
-
-system("tar cfj keymaps.tar.bz2 -C keymaps usr") == 0 or die;
-system("rm -rf keymaps");
diff --git a/perl-install/share/kmap2bkmap b/perl-install/share/kmap2bkmap
deleted file mode 100755
index 3aff35c3e..000000000
--- a/perl-install/share/kmap2bkmap
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/usr/bin/perl
-
-use lib "..";
-use c;
-
-my $KMAP_MAGIC = 0x8B39C07F;
-
-BEGIN { @ARGV == 1 or die "usage: kmap2bkmap <keymap>\n" }
-
-system("sudo loadkeys $ARGV[0]") == 0 or die;
-open F, "dumpkeys -n -f |";
-<F> =~ /^keymaps\s+(.*)/ or die;
-foreach (split ',', $1) {
-    my @l = /(\d+)-(\d+)/;
-    my ($i, $j) = @l ? @l : ($_,$_);
-    $keymaps[$_] = 1 foreach $i .. $j;
-}
-
-print pack("I", $KMAP_MAGIC);
-print map { pack "i", $keymaps[$_] || 0 } 0 .. c::MAX_NR_KEYMAPS()-1;
-
-foreach (<F>) {
-    s/\+0x/0x/g;
-    my ($keycode, $key, undef, @l) = split;
-    $keycode eq 'keycode' or next;
-    my $i = 0;
-    $L[$i++][$key] = hex $_ foreach @l;
-}
-close F or die "dumpkeys failed";
-
-foreach (@L) {
-    foreach my $i (0 .. c::NR_KEYS()-1) {
-	print pack "s", defined $_->[$i] ? $_->[$i] : 0x200;
-    }
-}
-
-exit 0;
diff --git a/perl-install/share/list.xml b/perl-install/share/list.xml
deleted file mode 100644
index a0baaa890..000000000
--- a/perl-install/share/list.xml
+++ /dev/null
@@ -1,343 +0,0 @@
-<list no-arch-libraries="on">
-
-<from expand="binary">
-  ash echo
-  cpio gzip bzip2
-  <if-not ARCH="ppc">
-    fdisk
-    rescuept
-  </if-not>
-  <if ARCH="ppc">
-    pdisk 
-  </if>
-  insmod-25 modinfo-25 rmmod-25
-  losetup
-  lvm2 mdadm
-
-  badblocks
-  mkswap
-  mke2fs e2fsck tune2fs dumpe2fs resize2fs
-
-  mkreiserfs
-  mkfs.xfs
-  resize_reiserfs
-  <if ARCH="i.86|x86_64|ia64">
-    mkdosfs 
-    ntfsresize
-    dmraid
-  </if>
-  <if ARCH="i.86">
-    mkfs.jfs fsck.jfs
-  </if>
-
-  consolechars kbd_mode
-  Xorg xmodmap xset
-  fb2png
-  packdrake parsehdlist
-  perl
-  monitor-edid monitor-parse-edid monitor-get-edid
-
-  <filter subst="s!^echo!/bin/echo!">
-    unicode_start
-  </filter>
-
-  <if ARCH="i.86|x86_64|ia64">
-    ifport 
-  </if>
-  <if ARCH="i.86|x86_64|ia64">
-    dmidecode 
-  </if>
-  <if ARCH="ia64">
-  efibootmgr 
-  </if>
-
-  <if ARCH="ppc">
-    hattrib hcopy hcd
-    hformat hmount humount 
-  </if>
-</from>
-
-<from dir="/usr/X11R6/LIB/modules">
-  libpcidata.a
-  drivers/fbdev_drv.o
-  input/wacom_drv.o
-  input/mouse_drv.o
-  input/keyboard_drv.o
-  fonts/libbitmap.a
-  linux/libfbdevhw.a
-  libfb.a
-  libshadow.a
-</from>
-
-<from dir="/usr/X11R6/lib/X11/fonts">
-  <to flatten="on">
-    misc/cursor.pcf.gz
-    TTF/Vera.ttf
-    TTF/VeraBd.ttf
-  </to>
-</from>
-
-<from dir="/usr/X11R6/lib/X11/locale">
-  C
-  en_US.UTF-8 
-  iso8859-1
-</from>
-
-<filter command="strip">
-<from dir="/LIB">
-  libnss_nis.so.2
-  libnss_files.so.2
-  libnss_dns.so.2
-  libresolv.so.2
-  ld-linux*.so.2
-</from>
-</filter>
-
-<from>
-  /etc/fonts/fonts.conf
-  /etc/protocols
-  /etc/imrc
-  /etc/im_palette.pal
-  /etc/X11/xserver/SecurityPolicy
-  /etc/gtk-2.0/gdk-pixbuf.loaders.*
-  /etc/gtk-2.0/gtk.immodules.*
-  /etc/pango/ARCH/pango.modules
-  /usr/LIB/gtk-2.0/*/loaders/libpixbufloader-xpm.so
-  /usr/LIB/gtk-2.0/*/loaders/libpixbufloader-png.so
-  /usr/LIB/gtk-2.0/*/immodules/im-cedilla.so
-  /usr/LIB/gtk-2.0/*/engines/libgalaxy.so
-
-  /usr/lib/rpm/rpmrc
-  /usr/lib/rpm/macros
-  /usr/share/locale/UTF-8
-  /usr/share/terminfo/l/linux
-  /usr/share/themes/Galaxy/gtk-2.0/gtkrc
-  /bin/brltty
-
-  <from expand="glob">
-    /etc/brltty/text.*.tbl
-    /etc/brltty/brltty-??.hlp
-    /lib/brltty/libbrlttyb??.so
-  </from>
-
-  <mode copy="keep-links">
-    /usr/lib/X11
-  </mode>
-
-  <from expand="command">
-    perl -Mlang -I. -le 'print foreach lang::console_font_files()'
-  </from>
-</from>
-
-<from dir="/usr/share/ldetect-lst">
-  <filter command="gzip">
-    Cards+ MonitorsDB isdn.db
-    dmitable pcitable usbtable
-  </filter>
-</from>
-
-<from dir="/usr/LIB/pango/*/modules">
-  pango-basic-fc.so
-  pango-arabic-fc.so
-  pango-hangul-fc.so
-  pango-hebrew-fc.so
-  pango-indic-fc.so
-  pango-thai-fc.so
-</from>
-
-<from dir="/usr/LIB/gconv">
-  BIG5.so
-  EUC-JP.so
-  libGB.so
-  libJIS.so
-  libKSC.so
-  EUC-KR.so
-  ISO8859-15.so
-  ISO8859-14.so
-  ISO8859-13.so
-  ISO8859-9E.so
-  ISO8859-9.so
-  ISO8859-7.so
-  ISO8859-5.so
-  ISO8859-3.so
-  ISO8859-2.so
-  ISO8859-1.so
-  KOI8-K.so
-  KOI8-U.so
-  KOI8-R.so
-  TIS-620.so
-  CP1251.so
-  GEORGIAN-PS.so
-  EUC-CN.so
-  gconv-modules
-</from>
-
-<filter subst="/^__END__/ and $_ = '', close ARGV">
-<from expand="main-perl">
-  AutoLoader.pm
-  Carp.pm
-  Carp/Heavy.pm
-  Exporter.pm
-  Exporter/Heavy.pm
-  FileHandle.pm
-  File/Basename.pm
-  File/Path.pm
-  File/Spec.pm
-  File/Spec/Unix.pm
-  File/Temp.pm
-  Getopt/Long.pm
-  PerlIO.pm
-  SelectSaver.pm
-  SelfLoader.pm
-  Symbol.pm
-  Time/Local.pm
-  IO/Socket/INET.pm
-  IO/Socket/UNIX.pm
-  base.pm
-  constant.pm
-  locale.pm
-  utf8.pm
-  utf8_heavy.pl
-  unicore/Exact.pl
-  unicore/Canonical.pl
-  unicore/PVA.pl
-  unicore/To/Lower.pl
-  unicore/To/Fold.pl
-  unicore/To/Upper.pl
-  unicore/lib/gc_sc/Word.pl
-  unicore/lib/gc_sc/Digit.pl
-  dumpvar.pl
-  warnings.pm
-  warnings/register.pm
-  ARCH-linux/File/Glob.pm
-  ARCH-linux/auto/File/Glob/Glob.so
-  ARCH-linux/Config.pm
-  ARCH-linux/Data/Dumper.pm
-  ARCH-linux/DynaLoader.pm
-  ARCH-linux/Errno.pm
-  ARCH-linux/Fcntl.pm
-  ARCH-linux/XSLoader.pm
-  ARCH-linux/auto/Fcntl/Fcntl.so
-  ARCH-linux/IO.pm
-  ARCH-linux/IO/File.pm
-  ARCH-linux/IO/Handle.pm
-  ARCH-linux/IO/Seekable.pm
-  ARCH-linux/IO/Select.pm
-  ARCH-linux/IO/Socket.pm
-  ARCH-linux/Socket.pm
-  ARCH-linux/_h2ph_pre.ph
-  ARCH-linux/asm/unistd.ph
-  <if ARCH="ia64">
-  ARCH-linux/asm-i386/unistd.ph 
-  ARCH-linux/asm-x86_64/unistd.ph 
-  ARCH-linux/asm/break.ph 
-  </if>
-  ARCH-linux/auto/Data/Dumper/Dumper.so
-  ARCH-linux/auto/IO/IO.so
-  ARCH-linux/auto/Socket/Socket.so
-  ARCH-linux/bits/syscall.ph
-  ARCH-linux/bits/wordsize.ph
-  ARCH-linux/sys/syscall.ph
-  ARCH-linux/syscall.ph
-  ARCH-linux/auto/DynaLoader/dl_findfile.al
-  ARCH-linux/lib.pm
-  ARCH-linux/re.pm
-  ARCH-linux/auto/POSIX/autosplit.ix
-  ARCH-linux/auto/POSIX/load_imports.al
-  ARCH-linux/auto/POSIX/POSIX.so
-  ARCH-linux/POSIX.pm
-  bytes.pm
-  integer.pm
-  overload.pm
-  strict.pm
-  vars.pm
-  Net/Cmd.pm
-  Net/Config.pm
-  Net/FTP.pm
-  Net/FTP/A.pm
-  Net/FTP/I.pm
-  Net/FTP/dataconn.pm
-  Net/Netrc.pm
-</from>
-
-<from expand="perl">
-  packdrake.pm
-  Packdrakeng.pm
-  MDK/Common
-  MDK/Common.pm
-  ARCH-linux/URPM.pm
-  ARCH-linux/URPM/Build.pm
-  ARCH-linux/URPM/Resolve.pm
-  ARCH-linux/URPM/Signature.pm
-  ARCH-linux/auto/URPM/URPM.so
-</from>
-
-<from expand="rpm" matching="m!^/usr/lib/perl5! and !/\.pod$/">
-  perl-Gtk2
-  perl-Glib
-</from>
-</filter>
-
-<from dir=".">
-  <to dir="$(REP4PMS)">
-    <filter command="strip">
-      <from expand="command">
-	find auto -follow -name "*.so"
-      </from>
-    </filter>
-  </to>
-</from>
-
-<from dir="../tools">
-  <to dir="/usr/bin" flatten="on">
-    serial_probe/serial_probe 
-    xhost+
-
-    <mode on-error="ignore">
-      ARCH/busybox
-    </mode>
-  </to>
-
-</from>
-
-<from dir="../kernel">
-  <to dir="/lib">
-    modules.description
-  </to>
-</from>
-
-<from dir="share">
-  <from expand="tar">
-    fonts.tar.bz2
-    keyboards.tar.bz2
-    locales-skeleton.tar.bz2
-    keymaps.tar.bz2
-  </from>
-
-  <to dir="/usr/share">
-    consolefonts devices
-
-    <from expand="glob">
-      *.png
-    </from>   
-  </to>
-</from>
-
-<from dir="pixmaps">
-  <to dir="/usr/share">
-    <from expand="glob" matching="!/^wiz_/">
-      *.png
-      *.xpm
-    </from>
-  </to>
-</from>
-
-<from dir="pixmaps/langs">
-  <to dir="/usr/share/langs">
-    <from expand="command">
-      perl -I. -Mlang -le 'print "lang-$_.png" foreach lang::list_langs()'
-    </from>
-  </to>
-</from>
-
-</list>
diff --git a/perl-install/share/locales-skeleton.tar.bz2 b/perl-install/share/locales-skeleton.tar.bz2
deleted file mode 100644
index 47b88cf37..000000000
--- a/perl-install/share/locales-skeleton.tar.bz2
+++ /dev/null
diff --git a/perl-install/share/logo-mandrake.png b/perl-install/share/logo-mandrake.png
deleted file mode 100644
index b014bdd34..000000000
--- a/perl-install/share/logo-mandrake.png
+++ /dev/null
diff --git a/perl-install/share/makedev.sh b/perl-install/share/makedev.sh
deleted file mode 100755
index e9dccaff2..000000000
--- a/perl-install/share/makedev.sh
+++ /dev/null
@@ -1,89 +0,0 @@
-#!/bin/sh
-#
-# $Id$
-#
-# This script creates all ISDN devices under /dev .
-# Many/most distributions don't include these devices.
-
-echo -e "Creating device inodes ... \c"
-
-if [ $# = 1 ] ; then
-	DEV=$1/dev
-else
-	DEV=/dev
-fi
-
-MAJ=45
-MIN=0
-rm -f $DEV/isdnctrl* $DEV/ippp*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 600 $DEV/isdn$MIN c $MAJ $MIN
-	mknod -m 660 $DEV/isdnctrl$MIN c $MAJ `expr $MIN + 64`
-	mknod -m 600 $DEV/ippp$MIN c $MAJ `expr $MIN + 128`
-	MIN=`expr $MIN + 1`
-done
-if   grep '^pppusers:' /etc/group > /dev/null
-then	# RH 5 standard
-	chgrp pppusers $DEV/isdnctrl* $DEV/ippp*
-elif grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/isdnctrl* $DEV/ippp*
-fi
-rm -f $DEV/isdninfo
-mknod -m 444 $DEV/isdninfo c $MAJ 255
-ln -sf $DEV/isdnctrl0 $DEV/isdnctrl
-
-MAJ=43
-MIN=0
-rm -f $DEV/ttyI*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 666 $DEV/ttyI$MIN c $MAJ $MIN
-	MIN=`expr $MIN + 1`
-done
-
-MAJ=44
-MIN=0
-rm -f $DEV/cui*
-while [ $MIN -lt 64 ] ; do
-	mknod -m 666 $DEV/cui$MIN c $MAJ $MIN
-	MIN=`expr $MIN + 1`
-done
-
-if grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/ttyI* $DEV/cui*
-fi
-
-MAJ=68
-MIN=0
-rm -f $DEV/capi20*
-mknod -m 666 $DEV/capi20 c $MAJ 0
-mknod -m 666 $DEV/capi20.00 c $MAJ 1
-mknod -m 666 $DEV/capi20.01 c $MAJ 2
-mknod -m 666 $DEV/capi20.02 c $MAJ 3
-mknod -m 666 $DEV/capi20.03 c $MAJ 4
-mknod -m 666 $DEV/capi20.04 c $MAJ 5
-mknod -m 666 $DEV/capi20.05 c $MAJ 6
-mknod -m 666 $DEV/capi20.06 c $MAJ 7
-mknod -m 666 $DEV/capi20.07 c $MAJ 8
-mknod -m 666 $DEV/capi20.08 c $MAJ 9
-mknod -m 666 $DEV/capi20.09 c $MAJ 10
-mknod -m 666 $DEV/capi20.10 c $MAJ 11
-mknod -m 666 $DEV/capi20.11 c $MAJ 12
-mknod -m 666 $DEV/capi20.12 c $MAJ 13
-mknod -m 666 $DEV/capi20.13 c $MAJ 14
-mknod -m 666 $DEV/capi20.14 c $MAJ 15
-mknod -m 666 $DEV/capi20.15 c $MAJ 16
-mknod -m 666 $DEV/capi20.16 c $MAJ 17
-mknod -m 666 $DEV/capi20.17 c $MAJ 18
-mknod -m 666 $DEV/capi20.18 c $MAJ 19
-mknod -m 666 $DEV/capi20.19 c $MAJ 20
-
-if grep '^dialout:' /etc/group > /dev/null
-then	# Debian/SuSE standard
-	chgrp dialout $DEV/capi20 $DEV/capi20.??
-fi
-rm -f $DEV/isdnctrl
-ln -s $DEV/isdnctrl1 $DEV/isdnctrl
-
-echo "done."
diff --git a/perl-install/share/net_applet.desktop b/perl-install/share/net_applet.desktop
deleted file mode 100644
index 3f4b990fd..000000000
--- a/perl-install/share/net_applet.desktop
+++ /dev/null
@@ -1,12 +0,0 @@
-[Desktop Entry]
-Encoding=UTF-8
-Name=NetApplet
-GenericName=Network Watcher Applet
-GenericName[fr]=Applet de Contr�le du r�seau
-Exec=net_applet
-Icon=disconnected
-Type=Application
-Terminal=0
-X-KDE-autostart-after=panel
-X-KDE-UniqueApplet=true
-X-KDE-autostart-condition=General:AutoStart:true
\ No newline at end of file
diff --git a/perl-install/share/net_applet.xinit b/perl-install/share/net_applet.xinit
deleted file mode 100755
index 0024726c2..000000000
--- a/perl-install/share/net_applet.xinit
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-DESKTOP=$1
-case $DESKTOP in
-   KDE|GNOME|IceWM) exec /usr/bin/net_applet;;
-esac
\ No newline at end of file
diff --git a/perl-install/share/po/.cvsignore b/perl-install/share/po/.cvsignore
deleted file mode 100644
index 4bcdbffcf..000000000
--- a/perl-install/share/po/.cvsignore
+++ /dev/null
@@ -1,5 +0,0 @@
-.*.sw?
-.memdump
-*.mo
-*~
-doc
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
deleted file mode 100644
index 608e7418b..000000000
--- a/perl-install/share/po/DrakX.pot
+++ /dev/null
@@ -1,22179 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR Free Software Foundation, Inc.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8-bit\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr ""
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr ""
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr ""
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr ""
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr ""
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr ""
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr ""
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr ""
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr ""
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr ""
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr ""
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664 diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227 diskdrake/interactive.pm:240 diskdrake/interactive.pm:401 diskdrake/interactive.pm:419 diskdrake/interactive.pm:556 diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182 install_any.pm:1698 install_any.pm:1721 install_steps.pm:82 install_steps_interactive.pm:38 interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41 network/ndiswrapper.pm:89 network/ndiswrapper.pm:101 network/netconnect.pm:1013 network/netconnect.pm:1121 network/netconnect.pm:1125 network/netconnect.pm:1129 network/netconnect.pm:1134 network/netconnect.pm:1266 network/netconnect.pm:1270 network/netconnect.pm:1274 network/netconnect.pm:1278 network/netconnect.pm:1386 network/netconnect.pm:1391 network/netconnect.pm:1411 network/netconnect.pm:1622 printer/printerdrake.pm:244 printer/printerdrake.pm:251 printer/printerdrake.pm:276 printer/printerdrake.pm:422 printer/printerdrake.pm:427 printer/printerdrake.pm:440 printer/printerdrake.pm:450 printer/printerdrake.pm:514 printer/printerdrake.pm:641 printer/printerdrake.pm:1352 printer/printerdrake.pm:1399 printer/printerdrake.pm:1436 printer/printerdrake.pm:1481 printer/printerdrake.pm:1485 printer/printerdrake.pm:1499 printer/printerdrake.pm:1591 printer/printerdrake.pm:1672 printer/printerdrake.pm:1676 printer/printerdrake.pm:1680 printer/printerdrake.pm:1729 printer/printerdrake.pm:1787 printer/printerdrake.pm:1791 printer/printerdrake.pm:1805 printer/printerdrake.pm:1920 printer/printerdrake.pm:1924 printer/printerdrake.pm:1967 printer/printerdrake.pm:2042 printer/printerdrake.pm:2060 printer/printerdrake.pm:2069 printer/printerdrake.pm:2078 printer/printerdrake.pm:2089 printer/printerdrake.pm:2153 printer/printerdrake.pm:2247 printer/printerdrake.pm:2767 printer/printerdrake.pm:3042 printer/printerdrake.pm:3048 printer/printerdrake.pm:3596 printer/printerdrake.pm:3600 printer/printerdrake.pm:3604 printer/printerdrake.pm:4064 printer/printerdrake.pm:4309 printer/printerdrake.pm:4333 printer/printerdrake.pm:4410 printer/printerdrake.pm:4476 printer/printerdrake.pm:4596 standalone/drakTermServ:393 standalone/drakTermServ:467 standalone/drakTermServ:476 standalone/drakTermServ:771 standalone/drakTermServ:778 standalone/drakTermServ:801 standalone/drakTermServ:847 standalone/drakTermServ:1023 standalone/drakTermServ:1503 standalone/drakTermServ:1519 standalone/drakTermServ:1524 standalone/drakTermServ:1532 standalone/drakTermServ:1544 standalone/drakTermServ:1565 standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612 standalone/drakbackup:1090 standalone/drakbackup:1122 standalone/drakbackup:1643 standalone/drakbackup:1799 standalone/drakbackup:2413 standalone/drakbackup:4102 standalone/drakbackup:4322 standalone/drakclock:124 standalone/drakconnect:683 standalone/drakconnect:687 standalone/drakconnect:692 standalone/drakconnect:707 standalone/drakfloppy:297 standalone/drakfloppy:300 standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26 standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169 standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59 standalone/scannerdrake:202 standalone/scannerdrake:261 standalone/scannerdrake:715 standalone/scannerdrake:726 standalone/scannerdrake:865 standalone/scannerdrake:876 standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121 wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr ""
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr ""
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr ""
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr ""
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr ""
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95 diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049 diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr ""
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr ""
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr ""
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr ""
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr ""
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr ""
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr ""
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr ""
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr ""
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr ""
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr ""
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr ""
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr ""
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr ""
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr ""
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr ""
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr ""
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr ""
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr ""
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr ""
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr ""
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr ""
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr ""
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr ""
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14 install_steps_interactive.pm:86 printer/printerdrake.pm:744 printer/printerdrake.pm:4405 printer/printerdrake.pm:4857 standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229 standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr ""
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr ""
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr ""
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr ""
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr ""
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445 diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80 standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr ""
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr ""
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr ""
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr ""
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr ""
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53 standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr ""
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n"
-"that is beyond the capabilities of your monitor: you may damage your monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr ""
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339 install_steps_gtk.pm:283 mouse.pm:168 services.pm:162 standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433 interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172 standalone/drakTermServ:200 standalone/drakTermServ:518 standalone/drakbackup:1345 standalone/drakbackup:3959 standalone/drakbackup:4019 standalone/drakbackup:4063 standalone/drakconnect:166 standalone/drakconnect:885 standalone/drakconnect:972 standalone/drakconnect:1071 standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392 standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345 ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89 help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422 install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771 interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318 interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:176 printer/printerdrake.pm:3676 standalone/drakautoinst:217 standalone/drakbackup:1345 standalone/drakbackup:3885 standalone/drakbackup:3889 standalone/drakbackup:3947 standalone/drakconnect:165 standalone/drakconnect:970 standalone/drakconnect:1070 standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741 standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174 standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513 ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153 install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528 interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285 standalone/drakbackup:3881 standalone/drakbug:104 standalone/drakconnect:161 standalone/drakconnect:246 standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336 standalone/draksec:338 standalone/draksec:356 standalone/draksec:358 ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr ""
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr ""
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr ""
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr ""
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr ""
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid ""
-"Keyboard layout: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid ""
-"Mouse type: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid ""
-"Mouse device: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid ""
-"Monitor: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid ""
-"Monitor HorizSync: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid ""
-"Monitor VertRefresh: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid ""
-"Graphics card: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid ""
-"Graphics memory: %s kB\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid ""
-"Color depth: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid ""
-"Resolution: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid ""
-"Xorg driver: %s\n"
-""
-msgstr ""
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr ""
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface (Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr ""
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481 standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68 standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244 standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr ""
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr ""
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr ""
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr ""
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr ""
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr ""
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr ""
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr ""
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr ""
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr ""
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: any.pm:276
-#, c-format
-msgid "Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr ""
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr ""
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr ""
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr ""
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr ""
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr ""
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr ""
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr ""
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180 network/netconnect.pm:688 printer/printerdrake.pm:1663 printer/printerdrake.pm:1784 standalone/drakbackup:1625 standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr ""
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr ""
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr ""
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr ""
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr ""
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr ""
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr ""
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr ""
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr ""
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr ""
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr ""
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr ""
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr ""
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr ""
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84 standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr ""
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr ""
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr ""
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr ""
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr ""
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr ""
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr ""
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr ""
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr ""
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr ""
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr ""
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr ""
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr ""
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr ""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr ""
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr ""
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr ""
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr ""
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr ""
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr ""
-
-#: any.pm:613
-#, c-format
-msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr ""
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr ""
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr ""
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157 diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530 interactive/http.pm:151 printer/printerdrake.pm:197 printer/printerdrake.pm:382 printer/printerdrake.pm:4857 standalone/drakbackup:2701 standalone/scannerdrake:668 standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr ""
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr ""
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr ""
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr ""
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr ""
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr ""
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr ""
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr ""
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 help.pm:444 install_any.pm:887 interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743 standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288 standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55 standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr ""
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:887 interactive.pm:158 modules/interactive.pm:71 standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307 standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr ""
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr ""
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr ""
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr ""
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr ""
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr ""
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr ""
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr ""
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr ""
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr ""
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr ""
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722 interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr ""
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr ""
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186 network/netconnect.pm:380 network/netconnect.pm:385 network/netconnect.pm:1377 printer/printerdrake.pm:105 printer/printerdrake.pm:2199 printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr ""
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr ""
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr ""
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-""
-msgstr ""
-
-#: any.pm:937
-#, c-format
-msgid "NFS: the traditional Unix file sharing system, with less support on Mac and Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid "You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903 printer/printerdrake.pm:3904 printer/printerdrake.pm:3905 printer/printerdrake.pm:5166 standalone/drakTermServ:295 standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497 standalone/drakroam:242 standalone/net_monitor:123 standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr ""
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr ""
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr ""
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr ""
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr ""
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr ""
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr ""
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr ""
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr ""
-
-#: authentication.pm:56
-#, c-format
-msgid "Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "Tells your computer to use LDAP for some or all authentication. LDAP consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "Allows you to run a group of computers in the same Network Information Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Winbind allows the system to retrieve information and authenticate users in a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr ""
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid "Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr ""
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr ""
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr ""
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr ""
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr ""
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr ""
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr ""
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr ""
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146 printer/printerdrake.pm:141 share/compssUsers.pl:81 standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr ""
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr ""
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr ""
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr ""
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr ""
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr ""
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr ""
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are good."
-msgstr ""
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr ""
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr ""
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr ""
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr ""
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr ""
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr ""
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr ""
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689 standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr ""
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-""
-msgstr ""
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr ""
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr ""
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr ""
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr ""
-
-#: bootloader.pm:1389
-#, c-format
-msgid ""
-"You can not install the bootloader on a %s partition\n"
-""
-msgstr ""
-
-#: bootloader.pm:1423
-#, c-format
-msgid "Your bootloader configuration must be updated because partition has been renumbered"
-msgstr ""
-
-#: bootloader.pm:1436
-#, c-format
-msgid "The bootloader can not be installed correctly. You have to boot rescue and choose \"%s\""
-msgstr ""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr ""
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr ""
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr ""
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr ""
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr ""
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr ""
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr ""
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr ""
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66 network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr ""
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr ""
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93 network/adsl_consts.pm:102 network/adsl_consts.pm:114 network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr ""
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132 network/adsl_consts.pm:143 network/adsl_consts.pm:152 network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr ""
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr ""
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881 network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr ""
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr ""
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr ""
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499 network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr ""
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr ""
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr ""
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749 network/adsl_consts.pm:760 network/adsl_consts.pm:771 network/adsl_consts.pm:782 network/adsl_consts.pm:791 network/adsl_consts.pm:800 network/adsl_consts.pm:809 network/adsl_consts.pm:818 network/adsl_consts.pm:827 network/adsl_consts.pm:836 network/adsl_consts.pm:845 network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr ""
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr ""
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396 network/adsl_consts.pm:408 network/adsl_consts.pm:420 network/adsl_consts.pm:431 network/adsl_consts.pm:442 network/adsl_consts.pm:454 network/adsl_consts.pm:466 network/adsl_consts.pm:477 network/adsl_consts.pm:488 network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr ""
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr ""
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr ""
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537 standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr ""
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr ""
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557 network/adsl_consts.pm:569 network/adsl_consts.pm:580 network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr ""
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr ""
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620 network/adsl_consts.pm:629 network/adsl_consts.pm:638 network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr ""
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656 network/adsl_consts.pm:661 network/adsl_consts.pm:666 network/adsl_consts.pm:671 network/adsl_consts.pm:676 network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr ""
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr ""
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693 network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr ""
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr ""
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr ""
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr ""
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr ""
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr ""
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr ""
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr ""
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr ""
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr ""
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr ""
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr ""
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443 diskdrake/interactive.pm:668 diskdrake/interactive.pm:687 diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr ""
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr ""
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr ""
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr ""
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519 diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr ""
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481 standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368 diskdrake/interactive.pm:444 diskdrake/interactive.pm:621 diskdrake/removable.pm:25 diskdrake/removable.pm:48 standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr ""
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452 standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr ""
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr ""
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr ""
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr ""
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr ""
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr ""
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr ""
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr ""
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr ""
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606 help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr ""
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr ""
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr ""
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr ""
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid "To have more partitions, please delete one to be able to create an extended partition"
-msgstr ""
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr ""
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr ""
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr ""
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr ""
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr ""
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr ""
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr ""
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr ""
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr ""
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr ""
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr ""
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr ""
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr ""
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr ""
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr ""
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr ""
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr ""
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr ""
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr ""
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr ""
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr ""
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr ""
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr ""
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid "After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr ""
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr ""
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr ""
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr ""
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793 install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr ""
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr ""
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr ""
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr ""
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr ""
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr ""
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr ""
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr ""
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr ""
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr ""
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr ""
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr ""
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr ""
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr ""
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr ""
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr ""
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr ""
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr ""
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr ""
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr ""
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr ""
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr ""
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr ""
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr ""
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr ""
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr ""
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid ""
-"DOS drive letter: %s (just a guess)\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202 diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid ""
-"Start: sector %s\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr ""
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ""
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid ""
-"Cylinder %d to %d\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid ""
-"Number of logical extents: %d\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid ""
-"Formatted\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid ""
-"Not formatted\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid ""
-"Mounted\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid ""
-"RAID %s\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid ""
-"Level %s\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid ""
-"Chunk size %d KiB\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid ""
-"RAID-disks %s\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr ""
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr ""
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid ""
-"Size: %s\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid ""
-"Geometry: %s cylinders, %s heads, %s sectors\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid ""
-"LVM-disks %s\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid ""
-"Partition table type: %s\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid ""
-"on channel %d id %d\n"
-""
-msgstr ""
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr ""
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr ""
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222 standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031 standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr ""
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid "Please enter your username, password and domain name to access this host."
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr ""
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr ""
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr ""
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr ""
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr ""
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr ""
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr ""
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr ""
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr ""
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr ""
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr ""
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr ""
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr ""
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr ""
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr ""
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr ""
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr ""
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-""
-msgstr ""
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-
-#: fsedit.pm:402
-#, c-format
-msgid ""
-"There is already a partition with mount point %s\n"
-""
-msgstr ""
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-
-#: fsedit.pm:412
-#, c-format
-msgid "You may not be able to install lilo (since lilo does not handle a LV on multiple PVs)"
-msgstr ""
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n"
-""
-msgstr ""
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr ""
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr ""
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr ""
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr ""
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr ""
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr ""
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr ""
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr ""
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr ""
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr ""
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr ""
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr ""
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr ""
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr ""
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr ""
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr ""
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr ""
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr ""
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr ""
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr ""
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855 install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr ""
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr ""
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr ""
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr ""
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr ""
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr ""
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr ""
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr ""
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr ""
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr ""
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr ""
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118 install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr ""
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr ""
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr ""
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr ""
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr ""
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr ""
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170 standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr ""
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr ""
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\""
-msgstr ""
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr ""
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid "Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s)."
-msgstr ""
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")"
-msgstr ""
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using the ALSA library.\n"
-""
-msgstr ""
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr ""
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr ""
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072 network/ndiswrapper.pm:95 network/netconnect.pm:561 printer/printerdrake.pm:1206 printer/printerdrake.pm:2230 printer/printerdrake.pm:2316 printer/printerdrake.pm:2362 printer/printerdrake.pm:2429 printer/printerdrake.pm:2464 printer/printerdrake.pm:2773 printer/printerdrake.pm:2780 printer/printerdrake.pm:3740 printer/printerdrake.pm:4069 printer/printerdrake.pm:4193 printer/printerdrake.pm:5314 standalone/drakTermServ:326 standalone/drakTermServ:1136 standalone/drakTermServ:1197 standalone/drakTermServ:1862 standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125 standalone/drakclock:224 standalone/drakconnect:1007 standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477 standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr ""
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr ""
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"."
-msgstr ""
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr ""
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr ""
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-""
-msgstr ""
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr ""
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75 standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr ""
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr ""
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed."
-msgstr ""
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr ""
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr ""
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr ""
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr ""
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr ""
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92 install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr ""
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr ""
-
-#: help.pm:51 help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232 install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321 network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678 standalone/drakTermServ:383 standalone/drakbackup:3938 standalone/drakbackup:4032 standalone/drakbackup:4049 standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr ""
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr ""
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162 share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr ""
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr ""
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr ""
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr ""
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr ""
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr ""
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr ""
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr ""
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: help.pm:186 help.pm:566 help.pm:855 help.pm:855 help.pm:855 help.pm:855 help.pm:855 help.pm:855 help.pm:855 install_steps_gtk.pm:606 standalone/drakbackup:2325 standalone/drakbackup:2329 standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr ""
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr ""
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr ""
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, choose\n"
-"this option. Be careful, because you will not be able to undo this operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr ""
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr ""
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr ""
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr ""
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr ""
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr ""
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434 interactive/newt.pm:318 printer/printerdrake.pm:3676 standalone/drakTermServ:362 standalone/drakbackup:3898 standalone/drakbackup:3937 standalone/drakbackup:4048 standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr ""
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386 install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr ""
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr ""
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr ""
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr ""
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr ""
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr ""
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr ""
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr ""
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if you\n"
-"know what you're doing."
-msgstr ""
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-
-#: help.pm:765 help.pm:765
-#, c-format
-msgid "pdq"
-msgstr ""
-
-#: help.pm:765 help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr ""
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr ""
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006 install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr ""
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr ""
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr ""
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr ""
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057 standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr ""
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-
-#: help.pm:869 help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr ""
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr ""
-
-#: install2.pm:117
-#, c-format
-msgid "Can not access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-
-#: install_any.pm:422 printer/printerdrake.pm:3022 printer/printerdrake.pm:3029 standalone/scannerdrake:182 standalone/scannerdrake:190 standalone/scannerdrake:241 standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr ""
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr ""
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr ""
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr ""
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr ""
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr ""
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr ""
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr ""
-
-#: install_any.pm:558
-#, c-format
-msgid "Can't find a package list file on this mirror. Make sure the location is correct."
-msgstr ""
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done."
-msgstr ""
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-""
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-""
-msgstr ""
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr ""
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr ""
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid "An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr ""
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr ""
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr ""
-
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr ""
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr ""
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr ""
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr ""
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr ""
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr ""
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr ""
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr ""
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr ""
-
-#: install_interactive.pm:163
-#, c-format
-msgid "Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandriva Linux installation."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr ""
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr ""
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr ""
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr ""
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr ""
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr ""
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr ""
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr ""
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this License. \n"
-"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
-"with the terms and conditions of this License is void and will terminate your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
-"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
-"of the possession and use of software components or arising out of  downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
-"and conditions of the license agreement for each component before using any component. Any question \n"
-"on a component license should be addressed to the component author and not to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of France.\n"
-"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-""
-msgstr ""
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-""
-msgstr ""
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr ""
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr ""
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm\"\n"
-""
-msgstr ""
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid ""
-"Entering step `%s'\n"
-""
-msgstr ""
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr ""
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr ""
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr ""
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr ""
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr ""
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid ""
-"%d KB\n"
-""
-msgstr ""
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr ""
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr ""
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr ""
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr ""
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr ""
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr ""
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid "You can not select this package as there is not enough space left to install it"
-msgstr ""
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr ""
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr ""
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr ""
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr ""
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr ""
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr ""
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr ""
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr ""
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr ""
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr ""
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr ""
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr ""
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr ""
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr ""
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr ""
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr ""
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92 install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr ""
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574 install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr ""
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921 install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr ""
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive before installation.\n"
-"It will then continue from the hard drive and the packages will remain available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr ""
-
-#: install_steps_interactive.pm:89 install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr ""
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr ""
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr ""
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr ""
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr ""
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr ""
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr ""
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr ""
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr ""
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr ""
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr ""
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr ""
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr ""
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr ""
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr ""
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr ""
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid "No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr ""
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr ""
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid "Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)"
-msgstr ""
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr ""
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr ""
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr ""
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid "Your system does not have enough space left for installation or upgrade (%d > %d)"
-msgstr ""
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr ""
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916 standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr ""
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr ""
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr ""
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr ""
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr ""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr ""
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr ""
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid "Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr ""
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr ""
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr ""
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr ""
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr ""
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr ""
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946 install_steps_interactive.pm:964 install_steps_interactive.pm:971 install_steps_interactive.pm:1125 services.pm:133 standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr ""
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005 install_steps_interactive.pm:1022 install_steps_interactive.pm:1038 install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr ""
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr ""
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr ""
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr ""
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr ""
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr ""
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr ""
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096 steps.pm:20
-#, c-format
-msgid "Security"
-msgstr ""
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr ""
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr ""
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr ""
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr ""
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr ""
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid "You appear to have an OldWorld or Unknown machine, the yaboot bootloader will not work for you. The install will continue, but you'll need to use BootX or some other means to boot your machine. The kernel argument for the root fs is: root=%s"
-msgstr ""
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr ""
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid "In this security level, access to the files in the Windows partition is restricted to the administrator."
-msgstr ""
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr ""
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr ""
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-""
-msgstr ""
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid "  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr ""
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512 standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301 standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr ""
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr ""
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202 standalone/drakups:303 standalone/drakups:363 standalone/drakups:383 standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr ""
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr ""
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr ""
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr ""
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid ""
-"Bad choice, try again\n"
-""
-msgstr ""
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr ""
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr ""
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr ""
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr ""
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr ""
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid ""
-"=> There are many things to choose from (%s).\n"
-""
-msgstr ""
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr ""
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr ""
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr ""
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr ""
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr ""
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr ""
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr ""
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr ""
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr ""
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr ""
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr ""
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr ""
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr ""
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr ""
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr ""
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr ""
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr ""
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr ""
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr ""
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr ""
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr ""
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr ""
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr ""
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr ""
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr ""
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr ""
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr ""
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr ""
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr ""
-
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr ""
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr ""
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr ""
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr ""
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr ""
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr ""
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr ""
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr ""
-
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr ""
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr ""
-
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr ""
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr ""
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr ""
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr ""
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr ""
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr ""
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr ""
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr ""
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr ""
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr ""
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr ""
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr ""
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr ""
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr ""
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr ""
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr ""
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr ""
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr ""
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr ""
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr ""
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr ""
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr ""
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr ""
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr ""
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr ""
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr ""
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr ""
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr ""
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr ""
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr ""
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr ""
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr ""
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr ""
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr ""
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr ""
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr ""
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr ""
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr ""
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr ""
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr ""
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr ""
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr ""
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr ""
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr ""
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr ""
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr ""
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr ""
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr ""
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr ""
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr ""
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr ""
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr ""
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr ""
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr ""
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr ""
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr ""
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr ""
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr ""
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr ""
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr ""
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr ""
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr ""
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr ""
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr ""
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr ""
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr ""
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr ""
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr ""
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr ""
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr ""
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr ""
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr ""
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr ""
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr ""
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr ""
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr ""
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr ""
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr ""
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr ""
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr ""
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr ""
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr ""
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr ""
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr ""
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr ""
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr ""
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr ""
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr ""
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr ""
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr ""
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr ""
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr ""
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr ""
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr ""
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr ""
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr ""
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr ""
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr ""
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr ""
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr ""
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr ""
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr ""
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr ""
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr ""
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr ""
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr ""
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr ""
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr ""
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr ""
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr ""
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr ""
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr ""
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr ""
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr ""
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr ""
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr ""
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr ""
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr ""
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197 network/adsl_consts.pm:206 network/adsl_consts.pm:215 network/adsl_consts.pm:224 network/adsl_consts.pm:233 network/adsl_consts.pm:242 network/adsl_consts.pm:251 network/adsl_consts.pm:260 network/adsl_consts.pm:269 network/adsl_consts.pm:278 network/adsl_consts.pm:287 network/adsl_consts.pm:296 network/adsl_consts.pm:305 network/adsl_consts.pm:314 network/adsl_consts.pm:323 network/adsl_consts.pm:332 network/adsl_consts.pm:341 network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr ""
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr ""
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr ""
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr ""
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr ""
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr ""
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr ""
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr ""
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr ""
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr ""
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr ""
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr ""
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr ""
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr ""
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr ""
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr ""
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr ""
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr ""
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr ""
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr ""
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr ""
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955 network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr ""
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr ""
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr ""
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr ""
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr ""
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr ""
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr ""
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr ""
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr ""
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr ""
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr ""
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr ""
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr ""
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr ""
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr ""
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr ""
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr ""
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr ""
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr ""
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr ""
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr ""
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr ""
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr ""
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr ""
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr ""
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr ""
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr ""
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr ""
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr ""
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr ""
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr ""
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr ""
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr ""
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr ""
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr ""
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr ""
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr ""
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr ""
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr ""
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr ""
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr ""
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr ""
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr ""
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr ""
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr ""
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr ""
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr ""
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr ""
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr ""
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr ""
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr ""
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr ""
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr ""
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr ""
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr ""
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr ""
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr ""
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr ""
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr ""
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr ""
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr ""
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr ""
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr ""
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr ""
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr ""
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr ""
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr ""
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr ""
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr ""
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr ""
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr ""
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr ""
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr ""
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr ""
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr ""
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr ""
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr ""
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr ""
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr ""
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr ""
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr ""
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr ""
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr ""
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr ""
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr ""
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr ""
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr ""
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr ""
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr ""
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr ""
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr ""
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr ""
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr ""
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr ""
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr ""
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr ""
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr ""
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr ""
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr ""
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr ""
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr ""
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr ""
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr ""
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr ""
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr ""
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr ""
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr ""
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr ""
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr ""
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr ""
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr ""
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr ""
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr ""
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr ""
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr ""
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr ""
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr ""
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr ""
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr ""
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr ""
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr ""
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr ""
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr ""
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr ""
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr ""
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr ""
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr ""
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr ""
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr ""
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr ""
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr ""
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr ""
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr ""
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr ""
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr ""
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr ""
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr ""
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr ""
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr ""
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr ""
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr ""
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr ""
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr ""
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr ""
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ""
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr ""
-
-#: loopback.pm:31
-#, c-format
-msgid ""
-"Circular mounts %s\n"
-""
-msgstr ""
-
-#: lvm.pm:112
-#, c-format
-msgid ""
-"Remove the logical volumes first\n"
-""
-msgstr ""
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr ""
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr ""
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr ""
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr ""
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr ""
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr ""
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr ""
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr ""
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr ""
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr ""
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr ""
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr ""
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr ""
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr ""
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it should\n"
-"not cause any damage."
-msgstr ""
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr ""
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr ""
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr ""
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr ""
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr ""
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr ""
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr ""
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr ""
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 network/modem.pm:85 network/modem.pm:99 network/modem.pm:104 network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705 network/netconnect.pm:717 network/netconnect.pm:722 network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr ""
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr ""
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr ""
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr ""
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr ""
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr ""
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr ""
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr ""
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr ""
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr ""
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr ""
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr ""
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr ""
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr ""
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr ""
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr ""
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr ""
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr ""
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr ""
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr ""
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr ""
-
-#: mouse.pm:89
-#, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr ""
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr ""
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr ""
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr ""
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr ""
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr ""
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr ""
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr ""
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr ""
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr ""
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr ""
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr ""
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr ""
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr ""
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr ""
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr ""
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr ""
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr ""
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr ""
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr ""
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr ""
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr ""
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr ""
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr ""
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr ""
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr ""
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr ""
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661 network/netconnect.pm:664 network/netconnect.pm:822 network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr ""
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr ""
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr ""
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60 network/netconnect.pm:705 network/netconnect.pm:722 network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr ""
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576 network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr ""
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr ""
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418 standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr ""
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr ""
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr ""
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr ""
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr ""
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr ""
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr ""
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr ""
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr ""
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr ""
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr ""
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr ""
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr ""
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr ""
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr ""
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr ""
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr ""
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr ""
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr ""
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr ""
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr ""
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr ""
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr ""
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr ""
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr ""
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr ""
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr ""
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr ""
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr ""
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr ""
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr ""
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr ""
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr ""
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr ""
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr ""
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr ""
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr ""
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr ""
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr ""
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr ""
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr ""
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr ""
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr ""
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr ""
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr ""
-
-#: network/netconnect.pm:361 standalone/drakconnect:460 standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr ""
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr ""
-
-#: network/netconnect.pm:365 network/netconnect.pm:386 network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr ""
-
-#: network/netconnect.pm:366 network/netconnect.pm:387 network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr ""
-
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr ""
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775 network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr ""
-
-#: network/netconnect.pm:421 network/netconnect.pm:469 network/netconnect.pm:776 network/netconnect.pm:1006 network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224 standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr ""
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr ""
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr ""
-
-#: network/netconnect.pm:477 network/netconnect.pm:487 network/netconnect.pm:497 network/netconnect.pm:530 network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr ""
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr ""
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n"
-""
-msgstr ""
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr ""
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr ""
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr ""
-
-#: network/netconnect.pm:516
-#, c-format
-msgid "A CAPI driver is available for this modem. This CAPI driver can offer more capabilities than the free driver (like sending faxes). Which driver do you want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251 standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr ""
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr ""
-
-#: network/netconnect.pm:532 standalone/drakconnect:117 standalone/drakconnect:311 standalone/drakconnect:573 standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr ""
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-
-#: network/netconnect.pm:546 network/netconnect.pm:660 network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr ""
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr ""
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr ""
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr ""
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr ""
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr ""
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr ""
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr ""
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr ""
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096 printer/printerdrake.pm:460 standalone/drakconnect:117 standalone/drakconnect:327 standalone/drakconnect:915 standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr ""
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr ""
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr ""
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr ""
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr ""
-
-#: network/netconnect.pm:724 network/netconnect.pm:963 standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: network/netconnect.pm:725 network/netconnect.pm:964 standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr ""
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr ""
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr ""
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr ""
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr ""
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr ""
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr ""
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr ""
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr ""
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr ""
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr ""
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274 network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr ""
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr ""
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr ""
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid "The following protocols can be used to configure a LAN connection. Please choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr ""
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr ""
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332 standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr ""
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr ""
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr ""
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr ""
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380 standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr ""
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr ""
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, c-format
-msgid "Get DNS servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672 standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr ""
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr ""
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783 standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid ""
-"%s already in use\n"
-""
-msgstr ""
-
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr ""
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr ""
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr ""
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr ""
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr ""
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr ""
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr ""
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr ""
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr ""
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that the\n"
-"channel is clear. This adds overhead, but increase performance in case of hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr ""
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr ""
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr ""
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr ""
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr ""
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr ""
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr ""
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr ""
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr ""
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr ""
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr ""
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-""
-msgstr ""
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr ""
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr ""
-
-#: network/netconnect.pm:1439
-#, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr ""
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr ""
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr ""
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr ""
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr ""
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr ""
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr ""
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr ""
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-""
-msgstr ""
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid "After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."
-msgstr ""
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not work, you might want to relaunch the configuration."
-msgstr ""
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.\n"
-""
-msgstr ""
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr ""
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr ""
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr ""
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr ""
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr ""
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr ""
-
-#: network/shorewall.pm:26
-#, c-format
-msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation."
-msgstr ""
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-""
-msgstr ""
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr ""
-
-#: network/tools.pm:191
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s with %s in root directory and press %s"
-msgstr ""
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr ""
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr ""
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next to the extended partitions."
-msgstr ""
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr ""
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr ""
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr ""
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted data."
-msgstr ""
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr ""
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr ""
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr ""
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr ""
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr ""
-
-#: pkgs.pm:481
-#, c-format
-msgid "Downloading file %s..."
-msgstr ""
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr ""
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr ""
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr ""
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr ""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765 printer/printerdrake.pm:4775 printer/printerdrake.pm:4920 printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr ""
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr ""
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr ""
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr ""
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr ""
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr ""
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr ""
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441 printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr ""
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr ""
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr ""
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150 printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr ""
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr ""
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr ""
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671 printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910 printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr ""
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr ""
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ""
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ""
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ""
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ""
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ""
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ""
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ""
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ""
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260 printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr ""
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr ""
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr ""
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr ""
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr ""
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr ""
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr ""
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr ""
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr ""
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr ""
-
-#: printer/main.pm:631 printer/printerdrake.pm:856 printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211 printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr ""
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr ""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr ""
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr ""
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr ""
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by decompressing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid "Here you can choose whether the printers connected to this machine should be accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid "You can also decide here whether printers on remote machines should be automatically made available on this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr ""
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593 standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr ""
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr ""
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
-msgstr ""
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr ""
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid "Turning on this allows to print plain text files in Japanese language. Only use this function if you really want to print text in Japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print Japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine."
-msgstr ""
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."
-msgstr ""
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506 printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr ""
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498 printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr ""
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid "In this mode the local CUPS daemon will be stopped and all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr ""
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid "These are the machines and networks on which the locally connected printer(s) should be available:"
-msgstr ""
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229 printer/printerdrake.pm:241 printer/printerdrake.pm:248 printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr ""
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid "Choose the network or host on which the local printers should be made available:"
-msgstr ""
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid ""
-"The entered host/network IP is not correct.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid ""
-"Examples for correct IPs:\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid ""
-"This host/network is already in the list, it cannot be added again.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr ""
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid "Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network."
-msgstr ""
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr ""
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr ""
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr ""
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid ""
-"The entered IP is not correct.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid ""
-"This server is already in the list, it cannot be added again.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951 standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr ""
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511 printer/printerdrake.pm:526 printer/printerdrake.pm:530 printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr ""
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410 printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr ""
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586 printer/printerdrake.pm:680 printer/printerdrake.pm:746 printer/printerdrake.pm:773 printer/printerdrake.pm:832 printer/printerdrake.pm:874 printer/printerdrake.pm:884 printer/printerdrake.pm:2011 printer/printerdrake.pm:2225 printer/printerdrake.pm:2257 printer/printerdrake.pm:2305 printer/printerdrake.pm:2357 printer/printerdrake.pm:2374 printer/printerdrake.pm:2418 printer/printerdrake.pm:2458 printer/printerdrake.pm:2508 printer/printerdrake.pm:2542 printer/printerdrake.pm:2552 printer/printerdrake.pm:2804 printer/printerdrake.pm:2809 printer/printerdrake.pm:2948 printer/printerdrake.pm:3059 printer/printerdrake.pm:3656 printer/printerdrake.pm:3722 printer/printerdrake.pm:3771 printer/printerdrake.pm:3774 printer/printerdrake.pm:3906 printer/printerdrake.pm:4007 printer/printerdrake.pm:4079 printer/printerdrake.pm:4100 printer/printerdrake.pm:4110 printer/printerdrake.pm:4205 printer/printerdrake.pm:4300 printer/printerdrake.pm:4306 printer/printerdrake.pm:4330 printer/printerdrake.pm:4437 printer/printerdrake.pm:4546 printer/printerdrake.pm:4566 printer/printerdrake.pm:4575 printer/printerdrake.pm:4590 printer/printerdrake.pm:4788 printer/printerdrake.pm:5240 printer/printerdrake.pm:5317 standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr ""
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008 printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr ""
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr ""
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr ""
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr ""
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected."
-msgstr ""
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be detected nor tested!"
-msgstr ""
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid "The longer you choose the timeout, the more reliable the detections of network printers will be, but the scan can take longer then, especially if there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr ""
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr ""
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr ""
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid "There are no printers found which are directly connected to your machine"
-msgstr ""
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid ""
-" (Make sure that all your printers are connected and turned on).\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on printers in the local network?\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid ""
-"Do you want to enable printing on printers in the local network?\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above?\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid ""
-"Are you sure that you want to set up printing on this machine?\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid "NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed."
-msgstr ""
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr ""
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr ""
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr ""
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ""
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr ""
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr ""
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list."
-msgstr ""
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid "If your printer is not listed, choose a compatible (see printer manual) or a similar one."
-msgstr ""
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr ""
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063 printer/printerdrake.pm:1170 printer/printerdrake.pm:2191 printer/printerdrake.pm:2206 printer/printerdrake.pm:2276 printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr ""
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types."
-msgstr ""
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr ""
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-
-#: printer/printerdrake.pm:1151
-#, c-format
-msgid "No auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437 printer/printerdrake.pm:1500 printer/printerdrake.pm:1592 printer/printerdrake.pm:1730 printer/printerdrake.pm:1806 printer/printerdrake.pm:1968 printer/printerdrake.pm:2061 printer/printerdrake.pm:2070 printer/printerdrake.pm:2079 printer/printerdrake.pm:2090 printer/printerdrake.pm:2231 printer/printerdrake.pm:2317 printer/printerdrake.pm:2363 printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr ""
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360 printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr ""
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284 printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr ""
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr ""
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid "No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr ""
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr ""
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr ""
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr ""
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid "If it is not the one you want to configure, enter a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid "Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid "Please choose the printer you want to set up or enter a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid "Please choose the printer to which the print jobs should go or enter a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid "Please choose the port that your printer is connected to or enter a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502 printer/printerdrake.pm:1594 printer/printerdrake.pm:1732 printer/printerdrake.pm:1808 printer/printerdrake.pm:1970 printer/printerdrake.pm:2063 printer/printerdrake.pm:2072 printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr ""
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid "To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."
-msgstr ""
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr ""
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr ""
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 printer/printerdrake.pm:2111 standalone/drakTermServ:446 standalone/drakTermServ:766 standalone/drakTermServ:782 standalone/drakTermServ:1521 standalone/drakTermServ:1530 standalone/drakTermServ:1542 standalone/drakbackup:499 standalone/drakbackup:605 standalone/drakbackup:640 standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr ""
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986 printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr ""
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid "To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid " If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed."
-msgstr ""
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr ""
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr ""
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr ""
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr ""
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr ""
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr ""
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid "To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."
-msgstr ""
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr ""
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr ""
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr ""
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid "Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid "To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware."
-msgstr ""
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr ""
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr ""
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr ""
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."
-msgstr ""
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr ""
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid "Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."
-msgstr ""
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr ""
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid "On many HP printers there are special functions available, maintenance (ink level checking, nozzle cleaning. head alignment, ...) on all not too old inkjets, scanning on multi-function devices, and memory card access on printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid "To access these extra functions on your HP printer, it must be set up with the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid "Either with the newer HPLIP which allows printer maintenance through the easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid "or with the older HPOJ which allows only scanner and memory card access, but could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200 printer/printerdrake.pm:2226 printer/printerdrake.pm:2232 printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202 printer/printerdrake.pm:2358 printer/printerdrake.pm:2364 printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr ""
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr ""
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr ""
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr ""
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr ""
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr ""
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805 printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr ""
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid "The printer name \"%s\" has more than 12 characters which can make the printer unaccessible from Windows clients. Do you really want to use this name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr ""
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603 standalone/harddrake2:38 standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr ""
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr ""
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr ""
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr ""
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr ""
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935 printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr ""
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted."
-msgstr ""
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid "Every PostScript printer is delivered with a PPD file which describes the printer's options and features."
-msgstr ""
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid "This file is usually somewhere on the CD with the Windows and Mac drivers delivered with the printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid "If you have Windows installed on your machine, you can find the PPD file on your Windows partition, too."
-msgstr ""
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid "Installing the printer's PPD file and using it when setting up the printer makes all options of the printer available which are provided by the printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid "Here you can choose the PPD file to be installed on your machine, it will then be used for the setup of your printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr ""
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031 standalone/scannerdrake:183 standalone/scannerdrake:192 standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr ""
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033 standalone/scannerdrake:184 standalone/scannerdrake:194 standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr ""
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr ""
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr ""
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr ""
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."
-msgstr ""
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid "The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes. Please connect your printer to a local USB port or configure it on the machine where it is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid "The driver for this printer only supports printers locally connected on the first parallel port, no printers on remote machines or print server boxes or on other parallel ports. Please connect your printer to the first parallel port or configure it on the machine where it is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr ""
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr ""
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."
-msgstr ""
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr ""
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr ""
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr ""
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr ""
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr ""
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr ""
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr ""
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr ""
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr ""
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858 printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s <file>\".\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865 printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid "To get a list of the options available for the current printer click on the \"Print option list\" button."
-msgstr ""
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3896
-#, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr ""
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special features of your printer are supported.\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid "The scanner in your printer can be used with the usual SANE software, for example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to share your scanner on the network.\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid "The memory card readers in your printer can be accessed like a usual USB mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on your desktop.\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid "The memory card readers in your printer can be accessed using HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB card reader is usually faster.\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid ""
-" - Ink level/status info\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid ""
-" - Ink nozzle cleaning\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid ""
-" - Print head alignment\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3944
-#, c-format
-msgid ""
-" - Color calibration\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this device, you only need to use \"scannerdrake\" if you want to share the scanner on the network."
-msgstr ""
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists."
-msgstr ""
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055 printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid ""
-"LPD and LPRng do not support IPP printers.\n"
-""
-msgstr ""
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr ""
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr ""
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?"
-msgstr ""
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr ""
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr ""
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159 printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr ""
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr ""
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid "You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"
-msgstr ""
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessible after booting your system and correct the configuration using the %s Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid "The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again."
-msgstr ""
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr ""
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr ""
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr ""
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessible by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on again?"
-msgstr ""
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr ""
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr ""
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr ""
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid "In this mode there is no local printing system, all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid "Enter the host name or IP of your CUPS server and click OK if you want to use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr ""
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr ""
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr ""
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid "Then locally connected printers can be used and remote printers on other CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid "Disadvantage of this approach is, that more resources on the local machine are needed: Additional software packages need to be installed, the CUPS daemon has to run in the background and needs some memory, and the IPP port (port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid "Here local resource occupation is reduced to a minimum. No CUPS daemon is started or port opened, no software infrastructure for setting up local print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid "Disadvantage is that it is not possible to define local printers then and if the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488 printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr ""
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr ""
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr ""
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr ""
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr ""
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr ""
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid "The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it. "
-msgstr ""
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr ""
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr ""
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr ""
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180 printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr ""
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr ""
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr ""
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr ""
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr ""
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr ""
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269 printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr ""
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274 printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr ""
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr ""
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr ""
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr ""
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr ""
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr ""
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr ""
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr ""
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr ""
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr ""
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr ""
-
-#: raid.pm:145
-#, c-format
-msgid ""
-"Not enough partitions for RAID level %d\n"
-""
-msgstr ""
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr ""
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr ""
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70 standalone/scannerdrake:78 standalone/scannerdrake:346 standalone/scannerdrake:382 standalone/scannerdrake:446 standalone/scannerdrake:490 standalone/scannerdrake:494 standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr ""
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr ""
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr ""
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr ""
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr ""
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr ""
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr ""
-
-#: security/help.pm:33
-#, c-format
-msgid "Allow/Forbid the list of users on the system on display managers (kdm and gdm)."
-msgstr ""
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5))."
-msgstr ""
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr ""
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr ""
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr ""
-
-#: security/help.pm:90
-#, c-format
-msgid " Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr ""
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr ""
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr ""
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-
-#: security/help.pm:106
-#, c-format
-msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters."
-msgstr ""
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr ""
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
-
-#: security/help.pm:127
-#, c-format
-msgid "if set, send the mail report to this email address else send it to root."
-msgstr ""
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr ""
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr ""
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr ""
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr ""
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr ""
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr ""
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr ""
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr ""
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr ""
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr ""
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr ""
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr ""
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr ""
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr ""
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr ""
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr ""
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr ""
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr ""
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr ""
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr ""
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr ""
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr ""
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr ""
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr ""
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr ""
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr ""
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr ""
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr ""
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr ""
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr ""
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr ""
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr ""
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr ""
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr ""
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr ""
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr ""
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr ""
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr ""
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr ""
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr ""
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr ""
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr ""
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr ""
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr ""
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr ""
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr ""
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr ""
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr ""
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr ""
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr ""
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr ""
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: security/level.pm:44
-#, c-format
-msgid "Passwords are now enabled, but use as a networked computer is still not recommended."
-msgstr ""
-
-#: security/level.pm:45
-#, c-format
-msgid "This is the standard security recommended for a computer that will be used to connect to the Internet as a client."
-msgstr ""
-
-#: security/level.pm:46
-#, c-format
-msgid "There are already some restrictions, and more automatic checks are run every night."
-msgstr ""
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes possible.\n"
-"The security is now high enough to use the system as a server which can accept\n"
-"connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level."
-msgstr ""
-
-#: security/level.pm:50
-#, c-format
-msgid "This is similar to the previous level, but the system is entirely closed and security features are at their maximum."
-msgstr ""
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr ""
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr ""
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr ""
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr ""
-
-#: security/level.pm:63
-#, c-format
-msgid "A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr ""
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr ""
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: services.pm:35
-#, c-format
-msgid "Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: services.pm:54
-#, c-format
-msgid "named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."
-msgstr ""
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: services.pm:73
-#, c-format
-msgid "Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."
-msgstr ""
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr ""
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr ""
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr ""
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr ""
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr ""
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr ""
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr ""
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr ""
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr ""
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr ""
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr ""
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr ""
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr ""
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr ""
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr ""
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr ""
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid "Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the system, called the <b>operating system</b> (based on the Linux kernel) together with <b>a lot of applications</b> meeting every need you could even think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid "Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr ""
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr ""
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid "Mandriva Linux is committed to the open source model. This means that this new release is the result of <b>collaboration</b> between <b>Mandriva's team of developers</b> and the <b>worldwide community</b> of Mandriva Linux contributors."
-msgstr ""
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid "We would like to <b>thank</b> everyone who participated in the development of this latest release."
-msgstr ""
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr ""
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid "Most of the software included in the distribution and all of the Mandriva Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid "The GPL is at the heart of the open source model; it grants everyone the <b>freedom</b> to use, study, distribute and improve the software any way they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid "The main benefit of this is that the number of developers is virtually <b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr ""
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid "Mandriva Linux has one of the <b>biggest communities</b> of users and developers. The role of such a community is very wide, ranging from bug reporting to the development of new applications. The community plays a <b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid "To <b>learn more</b> about our dynamic community, please visit <b>www.mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel.php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr ""
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Download</b>. This is the free version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid "The Download version <b>cannot include</b> all the software that is not open source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid "\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid "\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid "You will not have access to the <b>services included</b> in the other Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid "Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux distribution. It includes a hand-picked selection of <b>premium software</b> for office, multimedia and Internet activities. Its menu is task-oriented, with a single application per task."
-msgstr ""
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid "PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack includes <b>thousands of applications</b> - everything from the most popular to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid "PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop applications</b> and a comprehensive selection of world-class <b>server applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr ""
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid "<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr ""
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid "\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid "Mandriva has developed two products that allow you to use Mandriva Linux <b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid "\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid "\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr ""
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid "Below are the Mandriva products designed to meet the <b>professional needs</b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid "\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid "\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr ""
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid "With your Discovery, you will be introduced to <b>KDE</b>, the most advanced and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid "KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid "KDE also includes a lot of <b>well integrated applications</b> such as Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr ""
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid "With PowerPack, you will have the choice of the <b>graphical desktop environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid "KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid "But we advise you to try all available ones (including <b>GNOME</b>, <b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid "With PowerPack+, you will have the choice of the <b>graphical desktop environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr ""
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid "It is a <b>full-featured office suite</b> that includes word processor, spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid "OpenOffice.org can read and write most types of <b>Microsoft® Office</b> documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr ""
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid "Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid "More than just a full-featured <b>e-mail client</b>, Kontact also includes an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</b>!"
-msgstr ""
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid "It is the easiest way to communicate with your contacts and to organize your time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr ""
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr ""
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr ""
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19 share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr ""
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr ""
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid "In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for <b>all of your tasks</b>:"
-msgstr ""
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid "\t* Manage your personal data with the integrated personal information suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr ""
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid "\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your <b>videos</b>."
-msgstr ""
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr ""
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr ""
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid "PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid "You will enjoy the powerful, integrated development environment from KDE, <b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid "PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr ""
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid "\t* <b>XEmacs</b>: another open source text editor and application development system."
-msgstr ""
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid "\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr ""
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid "With all these <b>powerful tools</b>, you will be able to write applications in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr ""
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr ""
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr ""
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr ""
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr ""
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr ""
-
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr ""
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid "With the powerful integrated development environment <b>KDevelop</b> and the leading Linux compiler <b>GCC</b>, you will be able to create applications in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr ""
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid "PowerPack+ will give you access to <b>Kolab</b>, a full-featured <b>groupware server</b> which will, thanks to the client <b>Kontact</b>, allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr ""
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr ""
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid "Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid "\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr ""
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid "\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source databases."
-msgstr ""
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid "\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-transparent version control system."
-msgstr ""
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid "\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid "\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr ""
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid "The <b>Mandriva Linux Control Center</b> is an essential collection of Mandriva Linux-specific utilities designed to simplify the configuration of your computer."
-msgstr ""
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid "You will immediately appreciate this collection of <b>more than 60</b> handy utilities for <b>easily configuring your system</b>: hardware devices, mount points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr ""
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid "Like all computer programming, open source software <b>requires time and people</b> for development. In order to respect the open source philosophy, Mandriva sells added value products and services to <b>keep improving Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> and the development of Mandriva Linux, <b>please</b> consider buying one of our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr ""
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid "To learn more about Mandriva products and services, you can visit our <b>e-commerce platform</b>."
-msgstr ""
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid "This platform has just been <b>redesigned</b> to improve its efficiency and usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr ""
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr ""
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid "<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid "Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid "\t* <b>Special discounts</b> on products and services of our online store <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid "\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr ""
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid "\t* <b>Early and privileged access</b>, before public release, to Mandriva Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr ""
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid "<b>Mandriva Online</b> is a new premium service that Mandriva is proud to offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid "Mandriva Online provides a wide range of valuable services for <b>easily updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid "\t* <b>Notification</b> of updates (by e-mail or by an applet on the desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid "\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr ""
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid "Do you require <b>assistance?</b> Meet Mandriva's technical experts on <b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid "Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid "For any question related to Mandriva Linux, you have the possibility to purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr ""
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets (OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr ""
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr ""
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr ""
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid "Set of tools to read and send mail and news (mutt, tin..) and to browse the Web"
-msgstr ""
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr ""
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr ""
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr ""
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr ""
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr ""
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr ""
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr ""
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr ""
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr ""
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr ""
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr ""
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr ""
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr ""
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr ""
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr ""
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr ""
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr ""
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr ""
-
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr ""
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr ""
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr ""
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr ""
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr ""
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr ""
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr ""
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr ""
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr ""
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
-msgstr ""
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr ""
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid "A graphical environment with user-friendly set of applications and desktop tools"
-msgstr ""
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr ""
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr ""
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr ""
-
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr ""
-
-#: share/compssUsers.pl:191
-#, c-format
-msgid "Network Utilities/Monitoring"
-msgstr ""
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr ""
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr ""
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-""
-msgstr ""
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-""
-msgstr ""
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)"
-msgstr ""
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr ""
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-
-#: standalone.pm:113
-#, c-format
-msgid "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-usbtable] [--dynamic=dev]"
-msgstr ""
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version] "
-msgstr ""
-
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr ""
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr ""
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid ""
-"%s: %s requires a username...\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid ""
-"%s: %s requires hostname...\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr ""
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr ""
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr ""
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr ""
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr ""
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr ""
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr ""
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr ""
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr ""
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr ""
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all nbis.                                                                \n"
-"    b) Activate the server.                                                          \n"
-"    c) Start the server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr ""
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr ""
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr ""
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766 standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr ""
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr ""
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid "In order to enable changes made for thin clients, the display manager must be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr ""
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a graphical \n"
-"        \tinterface to help manage/customize these images. To create the file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least one full kernel."
-msgstr ""
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks like:"
-msgstr ""
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once you are satisfied \n"
-"        with the configuration, you can remove root login privileges from the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing clients."
-msgstr ""
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this file."
-msgstr ""
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local configuration can be\n"
-"        turned back off, retaining the configuration files, once the client machine is configured."
-msgstr ""
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr ""
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr ""
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr ""
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr ""
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr ""
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr ""
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr ""
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr ""
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr ""
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr ""
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr ""
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr ""
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr ""
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr ""
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr ""
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr ""
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr ""
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr ""
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr ""
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr ""
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr ""
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr ""
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr ""
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr ""
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr ""
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr ""
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr ""
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr ""
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr ""
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr ""
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr ""
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr ""
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr ""
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr ""
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr ""
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr ""
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr ""
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr ""
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr ""
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr ""
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid ""
-"%s passwd bad in Terminal Server - rewriting...\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid ""
-"%s is not a user..\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid ""
-"%s is already a Terminal Server user\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid ""
-"Addition of %s to Terminal Server failed!\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid ""
-"%s added to Terminal Server\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid ""
-"Deleted %s...\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid ""
-"%s not found...\n"
-""
-msgstr ""
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr ""
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr ""
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr ""
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr ""
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr ""
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr ""
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr ""
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid "Please choose for each step whether it will replay like your install, or it will be manual"
-msgstr ""
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78 standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr ""
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr ""
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902 standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr ""
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr ""
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr ""
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr ""
-
-#: standalone/drakbackup:153
-#, c-format
-msgid "Expect is an extension to the TCL scripting language that allows interactive sessions without user intervention."
-msgstr ""
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
-
-#: standalone/drakbackup:155
-#, c-format
-msgid "For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup."
-msgstr ""
-
-#: standalone/drakbackup:156
-#, c-format
-msgid "This option will save files that have changed.  Exact behavior depends on whether incremental or differential mode is used."
-msgstr ""
-
-#: standalone/drakbackup:157
-#, c-format
-msgid "Incremental backups only save files that have changed or are new since the last backup."
-msgstr ""
-
-#: standalone/drakbackup:158
-#, c-format
-msgid "Differential backups only save files that have changed or are new since the original 'base' backup."
-msgstr ""
-
-#: standalone/drakbackup:159
-#, c-format
-msgid "This should be a local user or email address that you want the backup results sent to. You will need to define a functioning mail server."
-msgstr ""
-
-#: standalone/drakbackup:160
-#, c-format
-msgid "This should be the return address that you want the backup results sent from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid "Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up."
-msgstr ""
-
-#: standalone/drakbackup:162
-#, c-format
-msgid "For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup."
-msgstr ""
-
-#: standalone/drakbackup:163
-#, c-format
-msgid "Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path."
-msgstr ""
-
-#: standalone/drakbackup:164
-#, c-format
-msgid "Custom allows you to specify your own day and time.  The other options use run-parts in /etc/crontab."
-msgstr ""
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr ""
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid "\"%s\" is a local user, but you did not select a local smtp, so you must use a complete email address!"
-msgstr ""
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-
-#: standalone/drakbackup:480
-#, c-format
-msgid ""
-"Old user list:\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:482
-#, c-format
-msgid ""
-"New user list:\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-""
-msgstr ""
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:543 standalone/drakbackup:614 standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr ""
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr ""
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr ""
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr ""
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr ""
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr ""
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr ""
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr ""
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr ""
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr ""
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr ""
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr ""
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by FTP.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid "Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid ""
-" Error while sending mail. \n"
-""
-msgstr ""
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr ""
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr ""
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459 standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461 standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461 standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr ""
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr ""
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr ""
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr ""
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr ""
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr ""
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr ""
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr ""
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr ""
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr ""
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr ""
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr ""
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr ""
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr ""
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr ""
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr ""
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr ""
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr ""
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr ""
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr ""
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr ""
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr ""
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr ""
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr ""
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr ""
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr ""
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr ""
-
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr ""
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr ""
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045 standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046 standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047 standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048 standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049 standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr ""
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr ""
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr ""
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr ""
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr ""
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr ""
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr ""
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr ""
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr ""
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr ""
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr ""
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr ""
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr ""
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr ""
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr ""
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr ""
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr ""
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr ""
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr ""
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr ""
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr ""
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr ""
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr ""
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr ""
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr ""
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr ""
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr ""
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr ""
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid "If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr ""
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr ""
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr ""
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr ""
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr ""
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr ""
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr ""
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr ""
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr ""
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr ""
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr ""
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr ""
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr ""
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr ""
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr ""
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr ""
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid ""
-"\tLimit disk usage to %s MB\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid ""
-"\tDelete backups older than %s day(s)\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr ""
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr ""
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr ""
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid ""
-"\tBackup directly to Tape\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid ""
-"\tDo not include System Files\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid ""
-"\tBackups use tar and bzip2\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid ""
-"\tBackups use tar and gzip\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid ""
-"\tBackups use tar only\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid ""
-"\tUse .backupignore files\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid ""
-"\tSend mail to %s\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid ""
-"\tSend mail from %s\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid ""
-"\tUsing SMTP server %s\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid ""
-"\t-Hard drive.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid ""
-"\t-CD-R.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid ""
-"\t-Tape \n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid ""
-"\t-Network by FTP.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid ""
-"\t-Network by SSH.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid ""
-"\t-Network by rsync.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid ""
-"No configuration, please click Wizard or Advanced.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid ""
-"- Restore System Files.\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid ""
-"   - from date: %s %s\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid ""
-"- Restore User Files: \n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid ""
-"- Restore Other Files: \n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr ""
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr ""
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr ""
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr ""
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr ""
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr ""
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr ""
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr ""
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr ""
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr ""
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr ""
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr ""
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr ""
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr ""
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr ""
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr ""
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr ""
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr ""
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr ""
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr ""
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr ""
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr ""
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr ""
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr ""
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr ""
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr ""
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr ""
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr ""
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr ""
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr ""
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr ""
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr ""
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid ""
-"Unable to find backups to restore...\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr ""
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr ""
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr ""
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr ""
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr ""
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr ""
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr ""
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr ""
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid ""
-"The following packages need to be installed:\n"
-""
-msgstr ""
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr ""
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr ""
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr ""
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr ""
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr ""
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr ""
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr ""
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr ""
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr ""
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr ""
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr ""
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr ""
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr ""
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr ""
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr ""
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189 standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70 standalone/printerdrake:138 standalone/printerdrake:139 standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr ""
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr ""
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191 standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr ""
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid "Your system bootloader is not in framebuffer mode. To activate graphical boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr ""
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr ""
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr ""
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr ""
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr ""
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr ""
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr ""
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr ""
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr ""
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr ""
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr ""
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148 standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr ""
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr ""
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr ""
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr ""
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr ""
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr ""
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr ""
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr ""
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr ""
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr ""
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr ""
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr ""
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr ""
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr ""
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel version, and /proc/cpuinfo."
-msgstr ""
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr ""
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr ""
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr ""
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr ""
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr ""
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr ""
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr ""
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr ""
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr ""
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr ""
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr ""
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr ""
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr ""
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr ""
-
-#: standalone/drakconnect:97 standalone/drakconnect:822 standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr ""
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr ""
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr ""
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr ""
-
-#: standalone/drakconnect:117 standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr ""
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr ""
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr ""
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr ""
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: standalone/drakconnect:163 standalone/drakconnect:247 standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr ""
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr ""
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr ""
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr ""
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr ""
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr ""
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr ""
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr ""
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr ""
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr ""
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr ""
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr ""
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr ""
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr ""
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr ""
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr ""
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr ""
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr ""
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr ""
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr ""
-
-#: standalone/drakconnect:607 standalone/harddrake2:27 standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr ""
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr ""
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid "No ethernet network adapter has been detected on your system. Please run the hardware configuration tool."
-msgstr ""
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr ""
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr ""
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: standalone/drakconnect:752
-#, c-format
-msgid "Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr ""
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr ""
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr ""
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr ""
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr ""
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr ""
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr ""
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr ""
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr ""
-
-#: standalone/drakconnect:843
-#, c-format
-msgid "Warning, another Internet connection has been detected, maybe using your network"
-msgstr ""
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr ""
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr ""
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr ""
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr ""
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr ""
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr ""
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr ""
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr ""
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr ""
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr ""
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr ""
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr ""
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr ""
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakedm:80
-#, c-format
-msgid "You are going to close all running programs and lose your current session. Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr ""
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr ""
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr ""
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr ""
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr ""
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr ""
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr ""
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr ""
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr ""
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr ""
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr ""
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr ""
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr ""
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr ""
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr ""
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr ""
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr ""
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid ""
-"The creation of the boot floppy has been successfully completed \n"
-""
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr ""
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr ""
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr ""
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327 standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394 standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr ""
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr ""
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: standalone/drakfont:261
-#, c-format
-msgid ""
-"Could not find any font.\n"
-""
-msgstr ""
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr ""
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr ""
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr ""
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr ""
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr ""
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr ""
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr ""
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr ""
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr ""
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr ""
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr ""
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-""
-msgstr ""
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr ""
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr ""
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr ""
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr ""
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr ""
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr ""
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr ""
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr ""
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr ""
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr ""
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr ""
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr ""
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr ""
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr ""
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr ""
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr ""
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr ""
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr ""
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr ""
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr ""
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr ""
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr ""
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr ""
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr ""
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr ""
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr ""
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr ""
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr ""
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."
-msgstr ""
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr ""
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr ""
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr ""
-
-#: standalone/drakgw:261
-#, c-format
-msgid "Please choose what network adapter will be connected to your Local Area Network."
-msgstr ""
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr ""
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr ""
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr ""
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr ""
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr ""
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr ""
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr ""
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr ""
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr ""
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr ""
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr ""
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: standalone/drakgw:351
-#, c-format
-msgid ""
-"Potential LAN address conflict found in current config of %s!\n"
-""
-msgstr ""
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr ""
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU GPL.\n"
-"\n"
-"Usage: \n"
-""
-msgstr ""
-
-#: standalone/drakhelp:22
-#, c-format
-msgid ""
-" --help                - display this help     \n"
-""
-msgstr ""
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-""
-msgstr ""
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome frontend)\n"
-""
-msgstr ""
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr ""
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-""
-msgstr ""
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr ""
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr ""
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr ""
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr ""
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr ""
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr ""
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr ""
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr ""
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr ""
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr ""
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr ""
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr ""
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr ""
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr ""
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr ""
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362 standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694 standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr ""
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr ""
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr ""
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr ""
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr ""
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr ""
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr ""
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr ""
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr ""
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr ""
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr ""
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr ""
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr ""
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr ""
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr ""
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr ""
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr ""
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr ""
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr ""
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr ""
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr ""
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."
-msgstr ""
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr ""
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr ""
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr ""
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD contents.\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr ""
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr ""
-
-#: standalone/drakpxe:197
-#, c-format
-msgid "No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr ""
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr ""
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr ""
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr ""
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr ""
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr ""
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr ""
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr ""
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr ""
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr ""
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr ""
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr ""
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr ""
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90 standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr ""
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr ""
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr ""
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr ""
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but very\n"
-"easy to use security level. It should only be used for machines not connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard security\n"
-"recommended for a computer that will be used to connect to the Internet as a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high enough\n"
-"to use the system as a server which can accept connections from many clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr ""
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr ""
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr ""
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr ""
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr ""
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr ""
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr ""
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr ""
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr ""
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr ""
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr ""
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr ""
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr ""
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr ""
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr ""
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr ""
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr ""
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr ""
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr ""
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr ""
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr ""
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-""
-msgstr ""
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr ""
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr ""
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450 standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr ""
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr ""
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr ""
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr ""
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr ""
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr ""
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr ""
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr ""
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr ""
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr ""
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr ""
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286 standalone/harddrake2:84 standalone/harddrake2:110 standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr ""
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr ""
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr ""
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr ""
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr ""
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr ""
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr ""
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr ""
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr ""
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr ""
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr ""
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr ""
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr ""
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr ""
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr ""
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr ""
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr ""
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr ""
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr ""
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr ""
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr ""
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr ""
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr ""
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr ""
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709 standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr ""
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr ""
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr ""
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr ""
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr ""
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr ""
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr ""
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr ""
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr ""
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr ""
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr ""
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr ""
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr ""
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr ""
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr ""
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr ""
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr ""
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr ""
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr ""
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr ""
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr ""
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr ""
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr ""
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr ""
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr ""
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831 standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr ""
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr ""
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr ""
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr ""
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr ""
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr ""
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr ""
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr ""
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr ""
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr ""
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr ""
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr ""
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr ""
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr ""
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and 'hour'.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr ""
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr ""
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr ""
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-""
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr ""
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr ""
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr ""
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr ""
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr ""
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr ""
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr ""
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr ""
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr ""
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr ""
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr ""
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr ""
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr ""
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr ""
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr ""
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr ""
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr ""
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr ""
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr ""
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr ""
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr ""
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr ""
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr ""
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr ""
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr ""
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr ""
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr ""
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr ""
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr ""
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr ""
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr ""
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr ""
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr ""
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr ""
-
-#: standalone/drakxtv:111
-#, c-format
-msgid ""
-"Now, you can run xawtv (under X Window!) !\n"
-""
-msgstr ""
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr ""
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
-
-#: standalone/harddrake2:28
-#, c-format
-msgid "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr ""
-
-#: standalone/harddrake2:31
-#, c-format
-msgid "- PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids"
-msgstr ""
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr ""
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr ""
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr ""
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr ""
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr ""
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr ""
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr ""
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr ""
-
-#: standalone/harddrake2:50 standalone/harddrake2:82 standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr ""
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr ""
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr ""
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr ""
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr ""
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr ""
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr ""
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr ""
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr ""
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr ""
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to \"benchmark\" the cpu."
-msgstr ""
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr ""
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr ""
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr ""
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr ""
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)"
-msgstr ""
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr ""
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
-
-#: standalone/harddrake2:75
-#, c-format
-msgid "Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr ""
-
-#: standalone/harddrake2:80
-#, c-format
-msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used"
-msgstr ""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr ""
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr ""
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr ""
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr ""
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr ""
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr ""
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr ""
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr ""
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr ""
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "the WP flag in the CR0 register of the cpu enforce write protection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)"
-msgstr ""
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr ""
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr ""
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr ""
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr ""
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr ""
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr ""
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr ""
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr ""
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr ""
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr ""
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr ""
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr ""
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136 standalone/harddrake2:143 standalone/harddrake2:151 standalone/harddrake2:317 standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr ""
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr ""
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr ""
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr ""
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr ""
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr ""
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77 standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr ""
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79 standalone/printerdrake:159 standalone/printerdrake:161 standalone/printerdrake:161 standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr ""
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr ""
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr ""
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr ""
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr ""
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr ""
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr ""
-
-#: standalone/harddrake2:215
-#, c-format
-msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")"
-msgstr ""
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr ""
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr ""
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;tvignaud@mandriva.com&gt;\n"
-"\n"
-""
-msgstr ""
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr ""
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr ""
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr ""
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr ""
-
-#: standalone/harddrake2:304 standalone/net_monitor:108 standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr ""
-
-#: standalone/harddrake2:305 standalone/printerdrake:298 standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr ""
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr ""
-
-#: standalone/harddrake2:340
-#, c-format
-msgid "Click on a device in the left tree in order to display its information here."
-msgstr ""
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr ""
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr ""
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr ""
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr ""
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr ""
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr ""
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr ""
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr ""
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr ""
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr ""
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr ""
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr ""
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr ""
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr ""
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr ""
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr ""
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr ""
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr ""
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr ""
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr ""
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr ""
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr ""
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr ""
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr ""
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr ""
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr ""
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr ""
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr ""
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr ""
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr ""
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr ""
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr ""
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr ""
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr ""
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr ""
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr ""
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr ""
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr ""
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr ""
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr ""
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr ""
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr ""
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-""
-msgstr ""
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr ""
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr ""
-
-#: standalone/logdrake:415
-#, c-format
-msgid "You will receive an alert if one of the selected services is no longer running"
-msgstr ""
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr ""
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr ""
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr ""
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr ""
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr ""
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr ""
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr ""
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr ""
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr ""
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr ""
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr ""
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr ""
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr ""
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr ""
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr ""
-
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr ""
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr ""
-
-#: standalone/net_applet:73
-#, c-format
-msgid "Watched interface"
-msgstr ""
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr ""
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr ""
-
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr ""
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr ""
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr ""
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr ""
-
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr ""
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr ""
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr ""
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr ""
-
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr ""
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr ""
-
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr ""
-
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr ""
-
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr ""
-
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr ""
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr ""
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr ""
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr ""
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr ""
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr ""
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr ""
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr ""
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr ""
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr ""
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr ""
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr ""
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr ""
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr ""
-
-#: standalone/net_monitor:467
-#, c-format
-msgid "Warning, another internet connection has been detected, maybe using your network"
-msgstr ""
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr ""
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr ""
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr ""
-
-#: standalone/printerdrake:130 standalone/printerdrake:131 standalone/printerdrake:132 standalone/printerdrake:133 standalone/printerdrake:141 standalone/printerdrake:142 standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr ""
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr ""
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr ""
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr ""
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr ""
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr ""
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr ""
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr ""
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr ""
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr ""
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr ""
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr ""
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr ""
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr ""
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr ""
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr ""
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr ""
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr ""
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr ""
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr ""
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr ""
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr ""
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr ""
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr ""
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr ""
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr ""
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr ""
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid "Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr ""
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr ""
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr ""
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr ""
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr ""
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr ""
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr ""
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr ""
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr ""
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr ""
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid "It is possible that your %s needs its firmware to be uploaded everytime when it is turned on."
-msgstr ""
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr ""
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid "To do so, you need to supply the firmware file for your scanner so that it can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid "You find the file on the CD or floppy coming with the scanner, on the manufacturer's home page, or on your Windows partition."
-msgstr ""
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr ""
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr ""
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid "It is possible that your scanners need their firmware to be uploaded everytime when they are turned on."
-msgstr ""
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid "To do so, you need to supply the firmware files for your scanners so that it can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid "If you have already installed your scanner's firmware you can update the firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr ""
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr ""
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr ""
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr ""
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr ""
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315 standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr ""
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr ""
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr ""
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr ""
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid "More info in the driver's manual page. Run the command \"man sane-%s\" to read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid "After that you may scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid "Your %s has been configured, but it is possible that additional manual adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid "If it does not appear in the list of configured scanners in the main window of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-""
-msgstr ""
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-""
-msgstr ""
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid ""
-"There are no scanners found which are available on your system.\n"
-""
-msgstr ""
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr ""
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr ""
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr ""
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr ""
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr ""
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr ""
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid "Here you can choose whether the scanners connected to this machine should be accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid "You can also decide here whether scanners on remote machines should be made available on this machine."
-msgstr ""
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704 standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr ""
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid "These are the machines on which the locally connected scanner(s) should be available:"
-msgstr ""
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr ""
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr ""
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr ""
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691 standalone/scannerdrake:696 standalone/scannerdrake:742 standalone/scannerdrake:833 standalone/scannerdrake:841 standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid ""
-"You must enter a host name or an IP address.\n"
-""
-msgstr ""
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid ""
-"This host is already in the list, it cannot be added again.\n"
-""
-msgstr ""
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr ""
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr ""
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid ""
-"Some devices in the \"%s\" hardware class were removed:\n"
-""
-msgstr ""
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid ""
-"- %s was removed\n"
-""
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid ""
-"Some devices were added: %s\n"
-""
-msgstr ""
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid ""
-"- %s was added\n"
-""
-msgstr ""
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr ""
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr ""
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr ""
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr ""
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr ""
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr ""
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr ""
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr ""
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr ""
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr ""
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr ""
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr ""
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr ""
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr ""
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr ""
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr ""
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr ""
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr ""
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr ""
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr ""
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr ""
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr ""
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr ""
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr ""
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr ""
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr ""
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr ""
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr ""
-
diff --git a/perl-install/share/po/Makefile b/perl-install/share/po/Makefile
deleted file mode 100644
index dccc18f88..000000000
--- a/perl-install/share/po/Makefile
+++ /dev/null
@@ -1,70 +0,0 @@
-include ../../Makefile.config
-
-PMSFILES = $(ALLPMS) ../move/move.pm ../move/tree/mdk_totem
-PMSFILES_HERE = $(wildcard $(PMSFILES:%=../../%))
-
-POFILES = $(wildcard *.po)
-MOFILES = $(POFILES:%.po=%.mo)
-LANGS = $(POFILES:%.po=%)
-
-LOCALEDIR=$(DATADIR)/locale
-
-
-all: help mofiles
-
-mofiles: $(MOFILES)
-
-help:
-	@if [ ! -d doc ]; then \
-		echo "Checking out doc stuff now ..."; \
-		cvs co doc/manualB/{entities,manuals,modules}; \
-		rm -rf doc/CVS; \
-	else \
-		echo "Updating doc stuff now ..."; \
-		cvs update doc/manualB/{entities,manuals,modules}; \
-	fi
-	touch doc/manualB/entities/es/{button,icon,tab,text_field}_list.ent
-	./help_xml2pm.pl
-	mv help-zh_cn.pot help-zh_CN.pot
-
-%.mo: %.po
-	msgfmt -o $@ $<
-
-merge:
-	for i in $(POFILES); do msgmerge -N -C $$i $$i DrakX.pot > $${i}t; mv $${i}t $$i;done
-
-$(POFILES): DrakX.pot
-	perl -ne 'print unless /^# DO NOT BOTHER TO MODIFY HERE, SEE:|^#.*\Qdrakx-help.xml/ .. /^$$/' $@ > $@t
-	if [ -e help-$@t ]; then perl -pe 's|^#~ ||' -i $@t ; msgmerge -C $@t help-$@t $< > $@; else msgmerge $@t $< > $@; fi
-	rm $@t
-
-DrakX.pot: $(PMSFILES_HERE)
-	cd ../.. ; perl_checker -q --generate-pot share/po/$@ $(PMSFILES)
-
-install:
-	for l in $(LANGS); do \
-		$(SUDO) install -d $(LOCALEDIR)/$$l/LC_MESSAGES; \
-		$(SUDO) install -m 644 $$l.mo $(LOCALEDIR)/$$l/LC_MESSAGES/$(NAME).mo; \
-	done
-
-clean:
-	@rm -rf drakx-help.xml .memdump doc empty.po tmp.* messages tmp.pot *.mo $(POFILES:%=%t)
-
-verif:
-	perl -ne '/^\s*#/ or $$i += my @l = /\b__?\(/g; END { print "$$i\n" }' $(PMSFILES_HERE)
-	perl -ne '$$i += my @l = /\.c:/g; END { print "$$i\n" }' DrakX.pot
-
-verif2: 
-#	perl -I ../.. -Mcommon -e 'foreach (qw($(PMSFILES))) { printf "package foo%d;\n", ++$$i; print common::cat_($$_) }' | perl -ne 'print if !/use (diagnostics|vars|strict)/' | OUTFILE=tmp.pm perl -I. -I../.. -Mb_dump_strings >/dev/null 2>/dev/null
-	perl -pe 's|$$|\\n\\|' tmp.pm > tmp.pm_.c
-	xgettext --keyword=_ -o tmp.po tmp.pm_.c 
-	msgmerge DrakX.pot tmp.po > tmp.pot
-	grep "^msgid" tmp.pot | sort > tmp.pot.light
-	grep "^msgid" DrakX.pot | sort | diff - tmp.pot.light | grep "^>" || true
-
-
-#	for i in *.po; do echo -n "$i "; msgfmt -v $i 2>&1; done | perl -e 'print map { $_->[0] } sort { $a->[1] <=> $b->[1] } map { [ $_, (split)[1] ] } <>'
-
-
-%: %.sh
-	#  fake built-in
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
deleted file mode 100644
index e3778c280..000000000
--- a/perl-install/share/po/af.po
+++ /dev/null
@@ -1,29869 +0,0 @@
-# translation of DrakX-af21-09.po to Afrikaans
-# translation of DrakX-af.po to Afrikaans
-# KTranslator Generated File
-# KTranslator Generated File
-# Copyright (C) 2000,2003, 2004 Free Software Foundation, Inc.
-# Schalk W. Cronjé <schalkc@ntaba.co.za>, 2000.
-# Dirk van der Walt <mandrake@webmail.co.za>, 2003.
-# Dirk van der Walt <dirkvanderwalt@webmail.co.za>, 2004.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX-af\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-04-21 17:33+0200\n"
-"Last-Translator: Dirk van der Walt <dirkvanderwalt@webmail.co.za>\n"
-"Language-Team: Afrikaans\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.0.2\n"
-
-#: ../move/move.pm:292
-#, fuzzy, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "Kan nie skryf na USB-stafie"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-"Die USB-stafie het skryf-beskerming ge-aktiveer. Prop dit uit,\n"
-"verwyder die skryf-beskerming, prop dit weer in."
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Probeer weer"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "Gaan voort sonder USB-stafie"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-"Dit blyk dat die USB-stafie lees alleen is, ons kan dit nie huidiglik met\n"
-"veiligheid uitprop nie.\n"
-"\n"
-"\n"
-"Klik op die herlaai knoppie om die rekenaar te herlaai, prop dit uit,\n"
-"verwyder die skryf-beskerming, prop dit weer in, en loods\n"
-"dan weer Mandriva Move."
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Herlaai"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"U USB-stafie het nie enige geldige Windows (FAT) partisies nie.\n"
-"Ons moet voortgaan (dit is ook bruikbaar oor 'n groter hoeveelheid\n"
-"masjiene indien u FAT gebruik. Prop asseblief 'n USB-stafie met 'n\n"
-"USB partisie op in.\n"
-"\n"
-"\n"
-"U kan wel voortgaan sonder 'n USB-stafie - U sal dan Mandriva\n"
-" Move as 'n normale \"live\" bedryfstelsel kan gebruik."
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Ons kon nie enige USB-stafies opspoor nie. U het nou\n"
-"die geleentheid op een in te prop. Mandriva Move het die\n"
-"vermoë op u data in u tuisgids, asook die konfigurasie van die\n"
-"rekenaar daarop te stoor. Dis vind alles deursigtig plaas.\n"
-"Aandag: Indien u nou 'n USB-stafie inprop, wag asseblief paar\n"
-"sekondes voor die opspoor proses weer loop\n"
-"\n"
-"\n"
-"U kan wel voortgaan sonder 'n USB-stafie - U sal dan Mandriva\n"
-" Move as 'n normale \"live\" bedryfstelsel kan gebruik."
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "Benodig 'n USB-stafie vir die stoor van data"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "Spoor weer USB-Stafie op"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "Stel USB-stafie op"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr ""
-"Net 'n oomblik, skryf die rekenaar se konfigurasie-lêers na USB-stafie..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-"Voorsien u gebruikers inligting, wagwoord sal gebruik word vir die "
-"skermbewaarder"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Auto-konfigurasie"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Net 'n oomblik, spoor en konfigureer us toestelle"
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Fout"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
-"nie. Gaan op u eie risiko voort."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "'n Fout het voorgekom"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-"'n Fout het voorgekom:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"Hierdie kan die gevolg wees van 'n korupte konfigurasie-lêers\n"
-"wat op die USB-stafie is, in so geval kan u hulle verwyder\n"
-"en dan Mandriva Move herlaai. Dit behoort die probleem\n"
-"op te los. Om so te maak, klik op die aangewese knoppie.\n"
-"\n"
-"\n"
-"U kan ook herlaai en die USB-stafie verwyder, of selfs sy\n"
-"inhoud deur 'n ander bedryfstelsel bestudeer. U kan ook\n"
-"na die staafleêrs in konsole #3 en #4 loer om meer\n"
-"lig op die probleem te werp."
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "Verwyder rekenaar se konfigurasie-lêers"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "Herlaai bloot"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "Gebruik sonder enige CDROM ondersteuning"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Termineer hierdie programme"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "Geen CDROM ondersteunig"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Lees noukeurig!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"U kan nie 'n ander CDROM saam met die volgende programme gebruik nie: \n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "Kopieer na die geheue om die CDROM te kan verwyder"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64MB of meer"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X-bediener"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Kies 'n X-bediener"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Multikop-konfigurasie"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"U stelsel onderstuen multikop-konfigurasie.\n"
-"Wat wil u doen?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Kan nie Xorg pakket installeer nie: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Kies die geheue grootte van u videokaart"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Xorg-konfigurasie"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Watter tipe Xorg-konfigurasie verlang u?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigureer skyfkoppe afsonderlik"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-ekstensies"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigureer net die \"%s\"%s kaart"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s met 3D-hardwareversnelling"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "U videokaart kan 3D-hardewareversnelling onderstuen in Xorg %s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s met EKSPERIMENTELE 3D-hardewareversnelling"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling\n"
-"onder XFree86 %s bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
-
-#
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Aangepaste"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Verlaat"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Grafiesekaart"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Resolusie"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Toets"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Opsies"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behou die veranderinge?\n"
-"Huidige konfigurasie is:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, fuzzy, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Kies 'n monitor"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Kies 'n monitor"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Generies"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Vervaardiger"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "'Plug 'n Play'-aftas het gefaal. Kies asseblief self die monitor"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
-"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
-"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
-"belangrikste.\n"
-"\n"
-"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite dié van u\n"
-"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
-"kies konservatief."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horisontale verfristempo"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikale verfristempo"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 kleure (8 bis)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32-duisend kleure (15 bis)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65-duisend kleure (16 bis)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16-miljoen kleure (24 bis)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Resolusies"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Ander"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Kies die resolusie en kleurdiepte"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Videokaart: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "OK"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Kanselleer"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Hulp"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Toets konfigurasie"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Wil u die konfigurasie toets?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Waarskuwing: deur hierdie grafikakaart te toets, mag u rekenaar fries"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"'n Fout het voorgekom:\n"
-"%s\n"
-"Probeer om van u parameters te verander"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Verlaat in %d sekondes"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Is dit korrek?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sleutelbord uitleg: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistipe: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muistoestel: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HoriSink: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertVerfris: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Videokaart: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Video geheue: %s kB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusie: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg-drywer: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X met herlaai"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
-"Wil u X begin met 'n herlaai?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Dit blyk dat u vertoonkaart 'n 'TV-OUT'-verbinding het.\n"
-"Dit kan opgestel word deur 'frame-buffer' (raam-buffer)\n"
-"te gebruik.\n"
-"\n"
-"Om dit te laat werk, moet u die vertoonkaart aan die TV gekoppel wees\n"
-"voordat u die rekenaar aanskakel.\n"
-"Kies dan die \"TV out\" inskrywing op die herlaaistelsel se kieslys\n"
-"\n"
-"Verlang u hierdie funksie?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Watter norm gebruik u TV?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Wag asb."
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Besig met installasie van herlaaistelsel"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"U mag moontlik u 'Open Firmware' selflaai-toestel verander om\n"
-" die herlaaistelsel te aktiveer. Indien u nie die herlaaistelsel-porteks \n"
-" tydens seklflaai sien nie, hou die \"Command-Option-O-F\" in\n"
-" gedurende selflaai en tik die volgende in:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-"Tik daarna 'shut-down' in\n"
-"U behoort die herlaaistelsel-porteks met die volgende selflaai te sien."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"U het verkies om die herlaaistelsel op 'n partisie\n"
-"te installeer. Hiermee impliseer u dat u alreeds 'n herlaaistelsel op\n"
-"die hardeskyf waarmee u selflaai het (bv 'System Commander').\n"
-"\n"
-"Vanaf watter hardeyskyf geskied die selflaai?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sektor van skyf (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Eerste sektor van die 'root'-partisie"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Op Disket"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Mis hierdie stap"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installasie"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wil u die herlaaistelsel installeer"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Herlaaistylkonfigurasie"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Herlaaistelsel hoofopsies"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Gee die geheuegrootte in MB"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Probeer asb. weer"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Herlaaistelsel om te gebruik"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Herlaaitoestel"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Wagperiode voor verstekstelsel gelaai word"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Bekragtig ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "Dwing Geen APIC"
-
-#: any.pm:291
-#, fuzzy, c-format
-msgid "Force No Local APIC"
-msgstr "Dwing Geen APIC"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Wagwoord"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Wagwoord (weer)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Beperk instruksielyn-opsies"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "beperk"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Maak /tmp skoon met elke herlaai"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Beginboodskap"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Tydsbeperking vir stelselkernlaai"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Laat CD-herlaai toe?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Laat OF-herlaai toe?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "Verstek bedryfstelsel?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Beeld"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "'Root'"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Aanlas"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Videomodus"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, fuzzy, c-format
-msgid "Network profile"
-msgstr "Netwerkkoppelvlak"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Naam"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Verstek"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "Geen video"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Leë etiket word nie toegelaat nie"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "U moet 'n kernel-beeld spesifiseer"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "U moet 'n 'root-partisie spesifiseer"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Hierdie etiket is alreeds in gebruik"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Ander bedryfstelsel (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Ander bedryfstelsel (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Ander bedryfstelsel (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Hier is die huidige inskrywings\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "toegang na X-programme"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "toegang tot rpm-nutsprogramme"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "laat \"su\" toe"
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "toegang tot administratiewe-lêers"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "toegang na netwerk-nutsprogramme"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "toegang na kompilasie-gereedskap"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s alreeds bygevoeg)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Die wagwoord is te eenvoudig"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Gee asb. 'n gebruikerskode"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Die gebruikernaam mag alleenlik uit kleinletter, nommers, '-' en '_' bestaan"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Hierdie naam is te lank"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Hierdie genruikerskode bestaan alreeds"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Voeg gebruiker by"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Tik 'n gebruiker in\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Klaar"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Aanvaar gebruiker"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Regte naam"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Aanteken naam"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Dop"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Ikoon"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Outo-inteken"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Ek kan u rekenaar so opstel om een gebruiker outomaties in te teken."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Wil u hierdie funksie gebruik?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Ja"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Nee"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Kies die verstek gebruiker:"
-
-#
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Kies die vensterbestuurder om te loop:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#: any.pm:707
-#, fuzzy, c-format
-msgid "Language choice"
-msgstr "selfdoen"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Gebruik Unicode by verstek"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Alle tale"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Land / Omgewing"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Kies asseblief u land."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hier is die volle lys van beskikbare lande"
-
-#: any.pm:798
-#, fuzzy, c-format
-msgid "Other Countries"
-msgstr "Ander poorte"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Gevorderd"
-
-#: any.pm:806
-#, fuzzy, c-format
-msgid "Input method:"
-msgstr "Netwerkmetode:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Geen"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Geen deling"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Laat alle gebruikers toe"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Wil u graag dat gebruikers van hulle lêergidse kan deel?\n"
-"Deur dit toe te laat, kan gebruikers bloot op \"Share\" in konqueror en "
-"nautilus klik.\n"
-"\n"
-"\"Aangepaste\" laat toe vir per-gebruiker verstellings.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr "U kan uitvoer deur NFS of SMB te gebruik. Kies watter u wil gebruik."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Loods userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Sluit af"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Die per-gebruiker saamdeel-fasiliteit gebruik die groep \"fileshare\".\n"
-"U kan van 'userdrake' gebruik maak om gebruikers by heirdie\n"
-"groep te voeg."
-
-#: authentication.pm:24
-#, fuzzy, c-format
-msgid "Local file"
-msgstr "Plaaslike lêers"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, fuzzy, c-format
-msgid "Smart Card"
-msgstr "Ethernetkaart"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Windows-domein"
-
-#: authentication.pm:29
-#, fuzzy, c-format
-msgid "Active Directory with SFU"
-msgstr "Herstel alle rugsteune"
-
-#: authentication.pm:30
-#, fuzzy, c-format
-msgid "Active Directory with Winbind"
-msgstr "Herstel alle rugsteune"
-
-#: authentication.pm:56
-#, fuzzy, c-format
-msgid "Local file:"
-msgstr "Plaaslike lêers:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Windows-domein:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, fuzzy, c-format
-msgid "Active Directory with SFU:"
-msgstr "Herstel alle rugsteune"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, fuzzy, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Herstel alle rugsteune"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP-magtiging"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Basis-dn"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP-bediener"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "eenvoudig"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "Ssl"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, fuzzy, c-format
-msgid "Authentication Active Directory"
-msgstr "Magtigings-metode"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Domein"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Bediener"
-
-#: authentication.pm:115
-#, fuzzy, c-format
-msgid "LDAP users database"
-msgstr "Databasis"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, fuzzy, c-format
-msgid "Password for user"
-msgstr "Benodig wagwoord"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Inkripsie"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "NIS-magtiging"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS-domein"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS-bediener"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Om hierdie te laat werk met 'n W2K PDC, moet u die volgende doen: As admin "
-"voer die volgende opdrag uit, 'C:\\>net localgroup \"Pre-Windows 2000 "
-"Compatibla Acces\" everyone' en herlaai die bediener.\n"
-"U moet ook die gebruikernaam/wagwoord van die 'Domain Admin' hê om hierdie "
-"masjien aan te sluit by die Windows(TM)-domein.\n"
-"Indien die netwerk nog nie opgestel is nie, sal Drakx poog om by die domein "
-"aan te sluit, as die netwerk reg is.\n"
-"Sou dit nie werk nie, kan u later 'smbpasswd -j DOMEIN -U GEBRUIKER%%"
-"WAGWOORD' op die instruksielyn as die supergebruiker intik. Die Windows(tm) "
-"Domein, en Admin gebruiker/wagwoord moet gebruik word.\n"
-"Die opdrag 'wbinfo -t' sal u 'authentication secrets' ondersoek."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Magtiging deur Windows-domein"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Domein-administrarteur se naam"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Domein-administrarteur se Wagwoord"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, fuzzy, c-format
-msgid "Default Idmap "
-msgstr "Verstek werkskerm"
-
-#: authentication.pm:171
-#, fuzzy, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr "Stel 'root' se wagwoord en magtigings-metodes op"
-
-#: authentication.pm:172
-#, fuzzy, c-format
-msgid "Set administrator (root) password"
-msgstr "Kies 'root' se wagwoord"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Magtigings-metode"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Geen wagwoord"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Hierdie wagwoord is te eenvoudig. (moet ten minste %d karakters bevat)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Magtiging"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "Kan nie uitsaai sonder 'n NIS-domein nie"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Welkom by die bedryfstelselkeuseprogram!\n"
-"\n"
-"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
-"vir die verstekopsie.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO met grafiese kieskaart"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO met tekskieskaart"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "nie genoeg spasie in /boot nie"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "U kan nie die herlaaistelsel op 'n %s partisie installeer nie\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-"U herlaaistelsel se konfigurasie moet opgedateer word omdat 'n partisie se "
-"nommer verander het"
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"Die herlaaistelsel kan nie korrek geïnstalleer word nie. U moet in redding-"
-"modus laai, kies dan \"%s\""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "Her-installeer herlaaistelsel"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d minute"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondes"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu is weg"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "konsole-helper is soek"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Oostenryk"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Australië"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "België"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brasilië"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Kanada"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Switserland"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Tsjeggiese Republiek"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Duitsland"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Denemarke"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estonië"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Spanje"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finland"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Frankryk"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Griekeland"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Hongarye"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Ierland"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Israel"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Italië"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Japan"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Nederlands"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Noorweë"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Neu-Seeland"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Pole"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rusland"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Swede"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slovakye"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Thailand"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Suid-Afrika"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Verenigde State"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"'WebDAV' is 'n protokol wat u in staat stel om 'n web-bediener se lêergids\n"
-"(e) plaaslik te kan heg. (dit is nou indien die web-bediener opgestel\n"
-"is as 'n WebDAV-bediener). Indien u 'n 'WebDAV' hegpunt\n"
-"wil heg, kies \"Nuwe\"."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Nuwe"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Ontheg"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Heg"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Hegpunt"
-
-#
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Voorsien asseblief die WebDAV-bediener se URL"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Die URL moet begin met http:// or https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Bediener: "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Hegpunt: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Opsies: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Rugsteun u data eers asb."
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-"van die skyf. (2048 sektors is genoeg)."
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Assistent"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Kies aksie"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"U het een massiewe Microsoft Windows partisie. \n"
-"Ek stel voor u verstel eers die grootte van dié partisie\n"
-"(kliek daarop en kliek dan op \"Verstel Grootte\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Kliek asb. op 'n partisie"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Detail"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Geen hardeskywe kon gevind word nie"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Gejoernaliseerde FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Ruilarea"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Leeg"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Lêerstelsel-tipes:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' instede."
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Skep"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Tipe"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Uitwis"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik ``Ontheg'' eerste"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Kies 'n ander partisie"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Kies 'n partisie"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Verlaat"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Herroep"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Skakel oor na normale gebruiksvlak"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Skakel oor na kundige gebruiksvlak"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Wil u in elk geval voortgaan?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Verlaat, maar moenie iets stoor nie"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wil u die /etc/fstab veranderinge stoor?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "U moet herlaai om die partisielys-veranderinge te aktiveer"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Verwyder almal"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Outo-allokeer"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Meer Keuses"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Hardeskyfinligting"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle primêre partisies is gebruik"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
-"skep"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Skryf partisielys"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Herstel partisielys"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Reddingspartisielys"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Herlaai partisietabel"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Outoheg van verwyderbare media"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Kies lêer"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die rugsteunpartisielys se grootte verskil\n"
-"Wil u voortgaan?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Probeer die partisielys red"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Gedetaileerde inligting"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Verstel Grootte"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Formatteer"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Voeg by RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Voeg by LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Verwyder uit RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Verwyder uit LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Verander RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Gebruik vir teruglus"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Skep 'n nuwe partisie"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Begin-sektor: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Lêerstelsel-tipe: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Voorkeure: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Logiese-volumenaam "
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"U kan nie 'n nuwe partisie skep nie\n"
-"(aangsien u die maksimum aantal primêre partisies bereik het).\n"
-"Verwyder eerstens 'n primêre partisie en skep dan 'n sekondêre partisie."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Verwyder die terugluslêer?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Alle data om hierdie partisie %s sal uitgewis word na verandering van die \n"
-"partisietipe"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Verander partisietipe"
-
-#
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Watter lêerstelsel verlang u?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Oorskakeling van ext2 na ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Waar wil u terugluslêer %s heg?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waar wil u toestel %s heg?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
-"gebruik word. Verwyder eers die teruglus."
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Waar wil u toestel %s heg?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Grootteverandering"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT lêerstelselgrense word bereken"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Hierdie partisie se grootte kan nie verstel word nie"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data om hierdie partisie moet gerugsteun word."
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Alle data op partisie %s sal uitgewis word met die grootteverandering"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Kies die nuwe grootte"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Nuwe grootte in MB: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"Om Data-integriteit te verseker nadat u die partisie(s)\n"
-"verklien het,sal daar toetste op u lêerstelsel(s) gedoen word,\n"
-"volgende keer as Windows(TM) selflaai"
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Kies 'n bestaande RAID om by toe te voeg"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "nuut"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Kies 'n bestaande LVM om by toe te voeg"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "LVM naam?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Teruglus"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Teruglus lêernaam:"
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Voorsien 'n lêernaam"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Lêer word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Lêer bestaan alreeds. Moet dit gebruik word?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Hegopsies:"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Verskeie"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "toestel"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "vlak"
-
-#: diskdrake/interactive.pm:1023
-#, fuzzy, c-format
-msgid "chunk size in KiB"
-msgstr "blokgrootte"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Watter soort partisie?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Die partisielys op skyf %s gaan opdateer word!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met formatering."
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Verskuif lêers na nuwe partisie toe"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Versteek lêers"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Lêergids %s bevat alreeds data\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Verskuif lêers na nuwe partisie toe"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Kopieer %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Verwyder %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partisie %s staan bekens as %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Toestel: "
-
-#: diskdrake/interactive.pm:1187
-#, fuzzy, c-format
-msgid "Devfs name: "
-msgstr "Rekenaarnaam: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Tipe:"
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Naam: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Begin: sektor %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d na silinder %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Geformateer\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Nie geformatter\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Geheg\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Teruglus lêer(s):\n"
-"    %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Verstekpartisie vir herlaai\n"
-"  (vir MS_DOS doeleinDES, nie LILO s'n nie)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Vlak %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, fuzzy, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Blokgrootte %s\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-skywe %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Teruglus lêernaam: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Dis hoogs waarskynlik dat hierdie partisie 'n\n"
-"drywerpartisie is en verkieslik alleen gelos\n"
-"moet word.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Hierdie spesiale herlaaipartisie\n"
-"is om u stelsel te duolaai.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Lees-alleen"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Info:"
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-skywe %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipe Partisielys: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Enkripsie-sleutel van lêerstelsel"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Kies 'n enkripsie-sleutel vir u lêerstelsel"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Hierdie enkripsie-sleutel is te eenvoudig. (moet ten minste %d karakters "
-"bevat.)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Die enkripsie-sleutels stem nie ooreen nie."
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Enkripsie-sleutel"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Enkripsie-sleutel (nogmaals)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Enkripsie-algoritme"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Verander tipe"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "Kan nie met gebruikernaam %s inteken nie (werkeerde wagwoord?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Benodig Domein-magtiging"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Watter gebruiker"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Nog een"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Voorsien asseblief u gebruikernaam, wagwoord en domeinnaam vir toegang tot\n"
-" hierdie rekenaar."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Gebruikernaam"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Soek bedieners"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Deursoek netnuus-bedieners"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Die pakket %s moet geïnstalleer word. Wil u dit installeer?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Verpligte pakket %s ontbreek"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Installeer pakkette..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "Verwyder pakkette..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Heg partisie %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "heg van partisie %s in lêergids %s het gefaal"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Toets %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout met onthegting van %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Aktiveer 'swap'-partisie %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Partisie %s word formateer"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lêer %s word geskep en formatteer"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering ban %s het gefaal"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"Moet nie 'inode'-toegangstye op hierdie lêerstelsel opdateer nie\n"
-"(bv. maak die toegang na die nuus-spoel vinniger, wat weer die\n"
-"nuus-bediener vinniger maak)"
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"Kan slegs afsonderlik geheg word (- op sy eie - , \n"
-"die '-a' opsie sal hiedie lêerstelsel nie laat heg nie)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-"Moet nie teenwoordige karakter- of blok-toestelle op die lêerstelsel "
-"vertolk\n"
-"nie."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"Moet nie die uitvoer van programme vanaf die gehegde\n"
-"lêerstelsel toelaat nie. Hierdie opsie kan handig wees indien 'n bediener\n"
-"lêerstelsels het, wie se programme nie op linux uitgevoer kan word nie."
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Heg die lêerstelsel as lees-alleen."
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "Alle I/O na die lêerstelsel moet sinkronies wees."
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"Laat 'n gewone gebruiker toe om 'n lêerstelsel te kan heg.\n"
-"Die naam van daardie gebruiker word na 'mtab' geskryf sodat hy/sy dit NIE\n"
-"kan ontheg NIE.\n"
-"Hierdie opsie sluit in opsies 'noexec, nosuid, en nodev'\n"
-"(behalwe dit oorskryf word deur ekstra opsies in die\n"
-"opsielyn\n"
-"'user,exec,dev,suid')."
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "Verleen skryf-toegang aan gewone gebruikers"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "Verleen slegs lees-toegang aan gewone gebruikers"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "met '/usr'"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "bediener"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Ek kan nie u partisielys van toesels %s lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
-"Die ander opsie is om DrakX te belet om die partisielys te verander.\n"
-"(fout is %s)\n"
-"\n"
-"Will u al die partisies verwyder?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Hegpunte moet met 'n / begin"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Hegpunte kan slegs alfa-numeriese karakters bevat"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: fsedit.pm:409
-#, fuzzy, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-"U mag moontlik nie instaat wees om lilo te installeer nie ( sedert lilo nie "
-"'n LV op menigte PV's kan hanteer nie)"
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Hierdie lêergids moet altyd in die wortellêerstelsel bly"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr "U benodig 'n ware lêerstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "U kan nie 'n lêerstelsel met enkripsie vir hegpunt %s gebruik nie."
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nie genoeg spasie vir outo-toekenning beskikbaar nie"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Niks om te doen nie"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Disket"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Skyf"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CDROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD-skrywers"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Magnetiese band"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Videokaart"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "TV-kaart"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Ander MultiMedia-toestelle"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Klankkaart"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Webkamera"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Verwerkers"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "ISDN toestelle"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernetkaart"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "ADSL toestelle"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Geheue"
-
-#: harddrake/data.pm:316
-#, fuzzy, c-format
-msgid "AGP controllers"
-msgstr "USB beheerders"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Drukker"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Stuurstok"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA-beheerders"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAID-beheerders"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA beheerders"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire-beheerders"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCIA-beheerders"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-beheerders"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "USB beheerders"
-
-#: harddrake/data.pm:421
-#, fuzzy, c-format
-msgid "USB ports"
-msgstr "USB-drukker"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-beheerders"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Brûe en stelselbeheerders"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Sleutelbord"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Muis"
-
-#: harddrake/data.pm:483
-#, fuzzy, c-format
-msgid "UPS"
-msgstr "CUPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Skandeerder"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Onbekend/Ander"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Wag asb... Konfigurasie word toegpas"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Geen alternatiewe drywer"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Daar is geen OSS/ALSA alternatief vir u klankkaart (%s) wat huidiglik \"%s\" "
-"gebruik"
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Klankkonfigurasie"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Hier kan u 'n alternatiewe drywer vir u klankkaart kies ( OSS of ALSA)"
-"klankkaart (%s)."
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"U kaart gebruik tans die %s\"%s\" drywer ( die kaart se verstek drywer is \"%"
-"s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) was die eerste klank-API. Dit is onafhanklikvan die "
-"bedryfstelsel (dus is dit beskikbaar op meeste UNIX(tm) stelselsdit is 'n "
-"vreeslik basiese API.\n"
-"Drywers vir OSS is ook vreeslik omslagtig\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) het 'n modulêre argitektuur wat\n"
-"'n wye verskeidenheid ISA, USB en PCI kaarte ondersteun.\n"
-"\n"
-"Die API is ook heelwat hoër as die van OSS.\n"
-"\n"
-"On alsa te gebruik, kan u:\n"
-"- die ou versoenbare OSS-api gebruik\n"
-"- die nuwe ALSA-api gebruik. Dit het heelwat gevorderde\n"
-"glanspunte het, maar moet die ALSA programmateek gebruik\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Drywer:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Probleemoplossing"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Waarskuwing"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"Die ou \"%s\" drywer is op 'n swartlys.\n"
-"\n"
-"Dit is geraporteer dat die die kernel 'oops' as dit aflaai.\n"
-"\n"
-"Die nuwe \"%s\" drywer sal met die volgende selflaai gebruik word."
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Geen oopbron drywer"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Daar is geen gratis drywer vir u klankkaart (%s) nie, daar is wel 'n "
-"gepatenteerde een by \"%s\"."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Geen drywer bekend"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
-"Daar is geen drywer, sover ons weet, beskikbaar vir klankkaart (%s) nie"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Onbekende drywer"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Fout: Die \"%s\" drywer vir u klankkaart in nie gelys nie"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Klank foutopsporing"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Probeer gerus hierdie metode om u klank aan die gang te kry:\n"
-"(vanaf die instruksielyn)\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\"sal vir u aandui watter verstek drywer u\n"
-"kaart gebruik\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" sal aan u vertoon watter drywer\n"
-"tans gebruik word\n"
-"\n"
-"- \"/sbin/lsmod\" sal u toelaat om te sien of die kaart se module (drywer)\n"
-"reeds gelaai is of nie.\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" en \"/sbin/chkconfig --list alsa\" sal\n"
-"aandui indien 'sound' en 'alsa' dienste loop in init vlak 3\n"
-"\n"
-"- \"aumix -q\" sal vir u aandui of die klank swygend is of nie \n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" sal aandui watter program die klankkaart\n"
-"gebruik.\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Laat ek enige drywer kies"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Kies 'n eiemagtige drywer"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Indien u seker is dat u die regte drywer vir u kaart ken\n"
-"kies dan dit uit die lys.\n"
-"\n"
-"Die \"%s\" klankkaart  gebruik tans die \"%s\" drywer "
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Gebruik outospeuring"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Onbekend|Generies"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Onbekend|CPH05X (bt878) [baie vervaardigers]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Onbekend|CPH06X (bt878) [baie vervaardigers]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Die GNU/Linux se bttv module outospeur gewoonlik al die TV-kaart se "
-"parameters korrek.\n"
-"Indien dit nie gebeur het nie, kan u die korrekte instemmer en kaart tipe "
-"hier opstel. Kies bloot die parameters wat benodig word."
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Model kaart:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Tipe instemmer"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "Aantal ontvang-buffers:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "aantal ontvang-buffers vir nmap se vangs"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL verstelling:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Ondersteunig vir Radio:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "laat radio ondersteuning toe"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-"die hele Mandriva Linux distribusie. Indien u saamstem met al die\n"
-"voorwaardes daarin, merk die \"%s\" boksie. Indien nie, kan u op die\n"
-"\"%s\" knoppie druk om teherlaai."
-
-#
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Aanvaar"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"GNU/Linux is 'n multigebruikerstelsel, dit beteken dat elke gebruiker sy\n"
-"eie voorkeure kan stel, met sy eie lêers ens. U kan meer hieroor in die\n"
-"\"Starter Guide\"  lees. Andersins as 'root' (die supergebruiker) kan\n"
-"gebruikers wat u hier byvoeg niks behalwe hul eie lêers en eie\n"
-"konfigurasie verander nie. U moet ten minste een gewone gebruiker vir uself\n"
-"skep.\n"
-"Hierdie gebruker is die een waaronder u moet inteken vir normale gebruik\n"
-"van die rekenaar. Alhoewel dit baie gemaklik is om as 'root' in te teken "
-"vir\n"
-"daaglikse werk, is dit baie gevaarlik. 'n Eenvoudige fout kan moontlik u\n"
-"stelsel\n"
-"breek. 'n Fout wat as gewone gebruiker gemaak word, sal net daardie\n"
-"gebruiker\n"
-"beïnvloed en nie hele stelsel nie.\n"
-"\n"
-"Eers moet u, u eie naam intik. Dit is nie verpligtend nie, want u kan\n"
-"eintlik\n"
-"enigiets intik, as u wil. DrakX sal dan die eerste woord wat u ingetik het,\n"
-"in die\n"
-"\"%s\" veld plaas. U kan hier verander indien u wil. Dit is die\n"
-"gebruikernaam waarmee\n"
-"die gebruiker op die rekenaar sal aanteken. U moet dan ook 'n wagwoord\n"
-"voorsien.\n"
-"'n Gewone gebruiker se wagwoord is nie so krities soos dié van die\n"
-"supergebruiker\n"
-"(uit 'n sekuriteitsoogpunt) nie, maar daar is geen\n"
-"rede om agterlosig met u data te wees nie.\n"
-"\n"
-"\n"
-"Indien u op \"%s\" kliek sal die gebruiker geskep word en kan u nog\n"
-"gebruikers byvoeg.\n"
-"U kan vir al u vriende gebruikername skep, sommer een vir pa en ma ook. \n"
-"Sodra u klaar is, kliek op \"%s\".\n"
-"Kliek op die \"%s\" knoppie indien u die verstek-instruksiedop vir die\n"
-"gebruiker\n"
-"wil verander.\n"
-"Dit is bash by verstek.\n"
-"\n"
-"Sodra u klaar is met die skep van gebruikers, sal u gevra word om 'n\n"
-"gebruiker\n"
-"te kies wie outomaties sal inteken sodra Linux klaar selfgelaai het. Indien\n"
-"u hierdie funksie wil gebruik (en plaaslike sekuriteit tans nie vreeslik\n"
-"belangrik is nie), kies asseblief die verlangde gebruiker en venstermaker,\n"
-"klik dan op \"%s\".\n"
-"Indien u NIE hierdie funksie wil gebruik nie, sorg dat \"%s\" NIE gemerk is\n"
-"nie. "
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Gebruiker"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Volgende"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Hier is 'n lys van die bestaande Linux partisies wat opgespoor is.\n"
-"U kan die assistent se keuses behou, hulle is gewoonlik geskik vir die\n"
-"meeste installasies. Sou u wil verander, moet u ten minste 'n wortel-\n"
-"partisie (\"/\") voorsien. Dit moet nie te klein wees nie, anders kan ons \n"
-"nie genog sagteware installeer nie. Indien u die data op 'n aparte \n"
-"partisie wil stoor, moet u ook 'n \"/home\"-partisie skep.\n"
-"(waarvoor u meer as een Linux partisie nodig het).\n"
-"\n"
-"Elke partisie word as volg gelys: \"Naam\", \"Kapasiteit\".\n"
-"\n"
-"\"Naam werk as volg\" \"tipe hardeskyf\", \"nommer van hardeskyf\",\n"
-"\"nommer van partisie\" (byvoorbeeld: \"hda1\").\n"
-"\n"
-"Indien u 'n IDE tipe hardeskyf het sal die tipe \"hd\" wees, en SCSI, sal \n"
-"\"sd\" wees\n"
-"\n"
-"Die nommer van die hardeskyf is altyd 'n letter, wat volg na \"hd\" \n"
-"of \"sd\".\n"
-"Met IDE hardeskywe:\n"
-"\n"
-" * \"a\" beteken \"meester-hardeskyf op die primêre IDE-beheerder\";\n"
-"\n"
-" * \"b\" beteken \"slaaf-hardeskyf op die primêre IDE-beheerder\";\n"
-"\n"
-" * \"c\" beteken \"meester-hardeskyf op die sekondêre IDE-beheerder\";\n"
-"\n"
-" * \"e\" beteken \"slaaf-hardeskyf op die sekondêre IDE-beheerder\";\n"
-"\n"
-"Met SCSI-hardeskywe, beteken 'n \"a\" die kleinste SCSI-ID,\"b\" sal\n"
-"dan die volgende ID verteenwoordig ens."
-
-#: help.pm:85
-#, fuzzy, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Die Mandriva Linux installasie is versprei oor 'n aantal CD-ROMs.DrakX\n"
-"weet wanneer 'n gekose pakket op 'n ander CD-ROM is. DrakX sal in so\n"
-"geval die huidige CD uitskop en aandui watter een benodig word."
-
-#: help.pm:92
-#, fuzzy, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"Nou moet u spesifiseer watter programme u op die rekenaar wil\n"
-"installeer. Daar is duisende pakkette beskikbaar vir Mandriva Linux, en\n"
-"om alles meer eenvoudig te maak, is die pakkette gegroepeer onder\n"
-"groepe van selfde tipe programme.\n"
-"\n"
-"Die groepe is so saamgestel dat dit saamval met die tipe gebruik van u\n"
-"rekenaar. Mandriva Linux het vier vooraf gespesifseerde installasies\n"
-"beskikbaar. Dink aan hierdie tipes as houers met verskillende pakkette.\n"
-"U kan wel uit die verskillende houers, verskillende pakkette kies.\n"
-"Dus kan u \"Werkstasie\" ook programme uit die \"Ontwikkeling\"\n"
-"bevat.\n"
-"( Amper soos die \"pick 'n mix\" by 'n Clicks of 'n winkel van u keuse! )\n"
-"\n"
-" * \"%s\": indien u die rekenaar as 'n werkstasie wil gebruik, kies een of\n"
-"meer hieruit.\n"
-"\n"
-" * \"%s\": indien u ontwikkelling op die masjien wil doen, kan u hier\n"
-"kies en keur.\n"
-"\n"
-" * \"%s\": mense wat 'n bediener wil opstel, hier is vir julle keuses.\n"
-"\n"
-" * \"%s\": Grafiese-omgewings. Indien u 'n grafiese omgewing wil\n"
-"gebruik, moet u ten minste een hier kies.\n"
-"\n"
-"Beweeg u muis stadig oor elke groep om meer inligting daaroor te bekom.\n"
-"Indien u NIKS kies nie gedurende 'n normale installasie, sal 'n venster\n"
-"opspring met verskillende keuses vir hierdie minimale installasie:\n"
-"\n"
-" * \"%s\": installeer die minimale programme vir 'n werkende grafiese\n"
-"werksomgewing.\n"
-"\n"
-" * \"%s\": installeer 'n basiese stelsel met basiese nutsporgramme en hul\n"
-"dokumentasie. Dit is geskik om 'n bediener op te stel.\n"
-"\n"
-" * \"%s\": sal 'n absolute minimale installasie doen, sodat u bloot 'n\n"
-"werkende Linux rekenaar het. Die grootte sal so 65 megagrepe wees.\n"
-"\n"
-"U kan die \"%s\" blokkie merk, dit is handig indien u vertroud is met al\n"
-"die beskikbare pakette, en u meer beheer verlang.\n"
-"\n"
-"Indien u die installasie in \"%s\"-modus begin het, kan u NIKS kies nie\n"
-"om te verhoed dat nuwe pakette installeer. Baie handig wanneer u 'n\n"
-"bestaande stelsel opdateeer, of herstel."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Werkstasie"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Grafiese Omgewing"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Individuele pakket-seleksie"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Opgradeer"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Met X"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Met basiese dokumentasie"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Werklike minimale installasie"
-
-#: help.pm:149
-#, fuzzy, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"Inidein u gespesifiseer het dat u individuele pakkette wil kies,\n"
-"sal daar 'n boom-struktuur aan u vertoon word met al die pakkette\n"
-"wat opgedeel is in groepe en sub-groepe. Soos u die deur hulle rits\n"
-"kan u hele groepe of sub-groepe kies, of self individuele pakkette.\n"
-"\n"
-"Sodra u 'n pakket kies, sal daar 'n beskrywing aan die regterkant verskyn\n"
-"wat aandui waarvoor die pakket gebruik word.\n"
-"\n"
-"Indien u 'n diensprogram kies, of dit nou deel is van 'n groepe pakkette of\n"
-"'n enkel een, sal u gevra word om die installasie daarvan te bevestig.\n"
-"Mandriva Linux sal by verstek alle bediener-programme afskop nadat u die\n"
-"rekenaar aangeskakel het. Hierdie bediener-programme is verpak sonder\n"
-"enige probleme bekend. Dit kon intussen verander het, nadat sekuriteits-"
-"gate\n"
-"gevind is. Indien u nie weet wat 'n diens veronderstel is om te doen nie, "
-"of\n"
-"waarom dit geïnstalleer word nie, klik op \"%s\". Deur op \"%s\" te klik "
-"sal\n"
-"die bediener-program geïnstalleer word en afskop sodra die Linux laai!!\n"
-"\n"
-"Die \"%s\"-opsie VERSPER die waarskuwings-dialoog wat verskyn\n"
-"sodra die installeerder ander pakkette moet kies a.g.v. afhanklikhede\n"
-"Afhanklikhede werk as volg: Sommige pakkette moet ander programme\n"
-"installeer om korrek te funksioneer, maar hierdie programme maak soms deel\n"
-"uit van 'n ander pakket, dus sal die installeer-program daardie pakkette\n"
-"ook installeer.\n"
-"\n"
-"Die klein disket-ikoon aan die lys se onderkant laat u toe om 'n lys van\n"
-"pakkette van 'n vorige installeasie te laai. Dit is handig indien u 'n\n"
-"aantal masjiene identies wil konfigureer. As u hierop klik, sal u gevra\n"
-"word om die disket te voorsien wat aan die einde van 'n vorige\n"
-"installasie geskep is. Raadpleeg die tweede wenk van die laaste stap\n"
-"oor hoe mens so disket skep."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "Outomatiese-afhanklikhede"
-
-#: help.pm:183
-#, fuzzy, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": deur op die \"%s\" knoppie te klik, sal u toegang tot die 'printer\n"
-"configuration wizard' kry. Gaan gerus die ooreenstemde hoofstuk in die\n"
-"\"Starter Guide\" na vir meer inligting. Dit stem baie ooreen met die een."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Konfigureer"
-
-#: help.pm:189
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-"\n"
-"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-"wat die rol van die diens verduidelik.\n"
-"\n"
-"Wees versigtig met hierdie stap. Indien u beplan om dié rekenaar as 'n\n"
-"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
-
-#: help.pm:206
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"GNU/Linux gebruik die GMT (Greenwich Mean Time) as verwysing en verstel\n"
-"dan die tyd volgens u tydsone. Dit beteken dat, in Suid-Afrika,\n"
-"die tyd op die moederbord sowat twee ure \"uit\" sal wees,\n"
-"indien u Johannesburg as tydsone kies. U kan GNU/Linux forseer om\n"
-"die moederbord en plaaslike tyd dieselfde te hou deur NIE die \"%s\" te\n"
-"merk NIE. Gebruik dit so wanneer die rekenaar\n"
-"ander bedryfstelsels ook kan laai, byvoorbeeld Windows.\n"
-"\n"
-"Die \"%s\"-opsie sal outomaties die klok reguleer deur gebruik te maak van\n"
-"'n eksterne tyd-bediener op die Internet. U sal natuurlik 'n werkende\n"
-"Internetkonneksie daarvoor benodig. Kies 'n bediener naby u. Hierdie opsie\n"
-"laat u toe om hierdie rekenaar self as 'n tyd-bediener te gebruik."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardewareklok gestel vir GMT"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Outotydsinkronisasie"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"Grafiesekaart\n"
-"\n"
-"   Die installeer-program sal in meeste gevalle u grafiesekaart outomaties\n"
-"opspoor. Indien daar probleme is, kan u self van hierdie lys die kaart\n"
-"kies.\n"
-"\n"
-"   Dit mag gebeur dat daar verskillende tipe X-bedieners beskikbaar sal\n"
-"wees vir u kaart, met of sonder 3D-versnelling, kies dan die een wat u\n"
-"behoefdes die beste sal bevredig."
-
-#: help.pm:231
-#, fuzzy, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"X (staan vir X Window Stelsel -let geen 's') is die hart van die GNU/Linux \n"
-"se grafiese-koppelvlak. Bo-op X, laai grafiese omgewings. ( dit sluit\n"
-"KDE, GNOME, AfterStep, WindowMaker ens. in)\n"
-"\n"
-"Hier is 'n lys van verstellings wat u kan verander om die beste resultate\n"
-"te verkry: Grafiesekaart\n"
-"\n"
-"Die program sal gewoonlik die regte grafiesekaart optel en opstel.\n"
-"Indien nie, kan u self die regte een vanaf hierdie lys kies.\n"
-"\n"
-"   Dit mag gebeur dat daar verskillende tipe X-bedieners beskikbaar sal\n"
-"wees vir u kaart, met of sonder 3D-versnelling, kies dan die een wat u\n"
-"behoefdes die beste sal bevredig.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Die program sal gewoonlik u monitor korrek kies.\n"
-"Indien nie, kan u self die regte een vanaf hierdie lys kies.\n"
-"\n"
-"\n"
-"\n"
-"Resolusie\n"
-"\n"
-"   Hier kan u die resolusie en aantal kleure kies wat vir u hardeware\n"
-"beskikbaar is. Kies die een wat u die beste sal pas.( let dat u wel\n"
-"hierdie keuse weer kan verander na die installasie). 'n voorbeeld\n"
-"van die gekose konfigurasie word vertoon op die skerm.\n"
-"\n"
-"\n"
-"\n"
-"Toets\n"
-"\n"
-"   Afhangende van u hardeware, sal die inskrywing moontlik weg wees.\n"
-"\n"
-"   ons gaan 'n grafiese skerm probeer opstel met die verstellings\n"
-"wat u gemaak het. Indien u die boodskap daarop kan sien en \"%s\"\n"
-"antwoord, sal DrakX na die volgende stap gaan. Indien u nie die boodskap\n"
-"kan sien nie, dui dit aan dat iets nie reg opgestel is nie. Die toets sal "
-"dan\n"
-"na 12 sekondes eindig, en terugval na die kieslys toe. Verander dan u\n"
-"keuses vir nog 'n probeerslag.\n"
-"\n"
-"\n"
-"\n"
-"Opsies\n"
-"\n"
-"   Hier kan u spesifiseer indien u rekenaar die grafiese-koppelvlak moet\n"
-"begin tydens selflaai. U kan \"%s\" merk indien u 'die rekenaar as bediener\n"
-"gaan gebruik, of indien u nie X met sukses kon opstel nie"
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Monitor\n"
-"\n"
-"   Die program sal gewoonlik u monitor korrek kies.\n"
-"Indien nie, kan u self die regte een vanaf hierdie lys kies."
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Resolusie\n"
-"\n"
-"   Hier kan u die resolusie en aantal kleure kies wat vir u hardeware\n"
-"beskikbaar is. Kies die een wat u die beste sal pas.( let dat u wel hierdie\n"
-"keuse weer kan verander na die installasie). 'n voorbeeld van die gekose\n"
-"konfigurasie word vertoon op die skerm."
-
-#: help.pm:303
-#, fuzzy, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"Indien daar verskillende tipe bedieners vir u kaart beskikbaar is, met of\n"
-"sonder 3D-versnelling, sal u gevra word om die een te kies wat u die beste\n"
-"sal pas."
-
-#: help.pm:308
-#, fuzzy, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Opsies\n"
-"\n"
-"   hier kan u kies of u die rekenaar wil laat eindig in 'n grafiese "
-"koppelvlak\n"
-"na dit aangeskakel is. U sal natuurlik \"%s\" kies indien die rekenaar as\n"
-"'n bediener gebruik gaan word, of u nie die skerm reg kon opstel nie."
-
-#: help.pm:316
-#, fuzzy, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"Op hierdie tydstip moet u besluit waar op die hardeskyf u Mandriva Linux\n"
-"wil installeer. Indien u 'n leë hardeskyf het, of indien 'n bestaande\n"
-"bedryfstelsel al die beskikbare spasie gebruik, sal u partisies moet\n"
-"skep. Om 'n partisie te skep veroorsaak dat u die hardeskyf logies\n"
-"verdeel, om spasie te skep vir u nuwe Mandriva Linux bedryfstelsel.\n"
-"\n"
-"Indien u 'n onervare gebruiker is, kan die skep van partisies vreemd en\n"
-"intimiderend wees.\n"
-"Die skep van partisies is gewoonlik onomkeerbaar en kan dataverlies\n"
-"meebring indien daar reeds 'n bestaande bedryfstelsel op die hardeskyf is.\n"
-"Gelukkig sluit DrakX 'n assisstent in wat die proses vergemaklik.\n"
-"Voor u verder gaan, lees die volgende deel deeglik deur, en wees rustig!\n"
-"(Moet nie stres kap nie! - Chill Dude!)\n"
-"\n"
-"Afhangende van hoe u hardeskyf gekonfigureer is, is daar 'n aantal opsies\n"
-"beskikbaar:\n"
-"\n"
-" * \"%s\": hierdie opsie sal die partisies op u leë hardeskyf outomaties\n"
-"opstel.\n"
-"Indien u die een kies, is dit al inset wat u hoef te lewer.\n"
-"\n"
-" * \"%s\": die assistent het een of meer bestaande Linux-partisies op die\n"
-"hardeskyf gekry. Indien u wil gebruik maak van hulle, kies hierdie opsie.\n"
-"Daar is verstek hegpunte, wat u kan verander, indien u wil, maar ons stel\n"
-"voor u hou daarby.\n"
-"\n"
-" * \" %s\": indien u Microsoft Windows op u hardeskyf geïnstalleer het, en\n"
-"dit neem al die spasie in beslag, moet ons eers 'n plekkie vir Linux skep. U "
-"kan die Microsoft Windows partisie met al die data uitwis\n"
-"(verwys na 'Erase entie disk' oplossing)\n"
-"of u kan die Microsoft Windows FAT of NTFS partisie verklein. Dit kan "
-"geskied\n"
-"sonner verlies van data, mits u die partisie gedefragmenteer het.Ons beveel "
-"ten sterkste aan dat u 'n rugsteun maak van u data. Hierdie is\n"
-"die beste metode indien u beide Mandriva Linux en Microsoft Windows op die\n"
-"rekenaar wil gebruik.\n"
-"\n"
-"Neem tog kennis dat dit die beskikbare oop spasie in Microsoft Windows sal\n"
-"verminder, aangesien ons plek moet maak vir Linux op die hardeskyf.\n"
-"\n"
-" * \"%s\": Indien u alle data op alle partisies op u hardeskyf wil uitwis,\n"
-"en dit dan vervang met Mandriva Linux, kan u hierdie opsie kies.\n"
-"Wees versigtig die opsie is onomkeerbaar!\n"
-"\n"
-"   !! Net weer waarsku: alle data op die skyf sal vernietig word. !! \n"
-" * \"%s\" hierdie opsie gaan doodeenvoudig alles uitwis en van vooraf\n"
-"die hardeskyf partisies skep. Alle data sal verlore gaan.\n"
-"\n"
-"   !! Net weer waarsku: alle data up die skyf sal vernietig word. !! \n"
-" * \"%s\": kies hierdie opsie indien u self die partisies wil opstel. Wees\n"
-"uiters versigtig -- dit is 'n gevaarlike keuse en u kan maklik al u data "
-"verloor. Hierdieopsie word aanbeveel vir persone wat ondervinding\n"
-"het en vertroud is met Linux .\n"
-"U kan verder oplees oor hoe om te werk te gaan in die \"Managing Your\n"
-"Partitions deel van die \"Starter Guide\"."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Gebruik beskikbare spasie"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Gebruik bestaande partisies"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windows-partisie"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Wis hele skyf"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Verwyder Windows(TM)"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Gespesialiseerde skyfpartisionering"
-
-#: help.pm:377
-#, fuzzy, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"Fluit-fluit my storie is uit! Die installasie het tot 'n einde gekom en u\n"
-"GNU/Linux reknaar is gereed vir gebruik. Klik bloot op \"%s\" om\n"
-"te herlaai.Onthou tog om die installasie-media (CDROM of Disket)\n"
-"te verwyder. Die eerste skerm wat u sal sien, na die rekenaar sy\n"
-"hardeware-toetse uitgevoer het, is die herlaaistelsel se kieslys.\n"
-"Daar kan u die bedryfstelsel kies wat moet laai.\n"
-"\n"
-"Die \"%s\" knoppie sal nog twee knoppies laat verskyn:\n"
-"\n"
-" * \"%s\": om 'n installasie-disket te skep wat die hele installasie\n"
-"aotomaties sal doen, sonner die hulp van 'n persoon.\n"
-"Dit sal soortgelyk aan hierdie een wees.\n"
-"\n"
-"   Let daarop dat twee verskillende opsies daarna beskikbaar sal wees:\n"
-"\n"
-"     * \"%s\" Gedeeltelik outomaties. Die skep van partisies benodig 'n\n"
-"persoon om te spesifiseer.\n"
-"\n"
-"      * \"%s\" Volkome outomaties. Die hardeskyf word totaal gewis, alle\n"
-"data word verloor.\n"
-"\n"
-"   Hierdie is handig wanneer u 'n paar van dieselfde masjiene moet\n"
-"installeer.\n"
-"Besoek gerus ons webwerf vir meer inligting hieroor.\n"
-"\n"
-" * \"%s\": stoor 'n lys van die gekose pakette in hierdie installasie.\n"
-"Om hierdie keuses met 'n volgende installasie te gebruik, plaas disket\n"
-"in aandrywer en begin die installasie. Kies [F1] en tik '>> linux\n"
-"defcfg=\"floppy\" <<' in."
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Skep outo-installasieskyf"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Herspeel"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Outomaties"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Stoor pakketseleksie"
-
-#: help.pm:412
-#, fuzzy, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Enige nuwe partisies moet eers geformatteer word voor dit bruikbaar is.\n"
-"(formatteer beteken dan ons 'n lêerstelsel daarop skep).\n"
-"\n"
-"U kan ook nou kies om bestaande partisies te formatteer om so al die\n"
-"data daarop uit te vee. Kies asseblief dan nou daardie partisies ook.\n"
-"\n"
-"Let tog daarop dat die NIE nodig is om al die vooraf-bestaande partisies\n"
-"weer te formatteer NIE. U moet wel partisies wat die bedryfstelsel bevat\n"
-"formatteer. ( byvoorbeeld \"/\",\"/usr\" of \"/var\") maar partisies met\n"
-"data wat u graag wil hou ( bv \"/home\") moet nie geformatteer word\n"
-"nie.\n"
-"\n"
-"Wees daarom versigtig wanneer u die partisies kies. Na dit geformatteer\n"
-"is, sal ALLE data daarop vernietig wees.\n"
-"\n"
-"Klik op \"%s\" sodra u gereed is om te formatteer.\n"
-"\n"
-"Klik op \"%s\" indien u 'n ander partisie vir die installasie van u nuwe\n"
-"Madrake Linux bedryfstelsel wil kies\n"
-"\n"
-"Klik op \"%s\" indien u partisies wil kies wat dan ondersoek en\n"
-"getoets moet word."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Vorige"
-
-#: help.pm:434
-#, fuzzy, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"Teen die tyd wat u Mandriva Linux installeer, is dit hoogs waarskynlik\n"
-"dat van die pakkette intussen opgedateer is. Foute kom reggestel wees,\n"
-"of sekuriteits probleme is dalk opgelos. Om voordeel hieruit te put, kan\n"
-"u hulle nou van die Internet aflaai. Merk \"%s\" indien u 'n werkende\n"
-"Internetkonneksie het, of \"%s\" sou u dit eers later wil doen\n"
-"\n"
-"Deur \"%s\" te kies, kan u 'n lys plekke sien waarvanaf hierdie\n"
-" pakkette gelaai kan word. Kies 'n geskikte een. 'n Boom-struktuur\n"
-" met die nuwwe pakkette in sal verskyn. As u gelukkig is met almal,kan u\n"
-" \"%s\" klik om hulle af te laai en te installeer, of \"%s\" om te ontsnap."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Installasie"
-
-#: help.pm:447
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"Op hierdie tydstip laat DrakX u toe om die sekuriteitsvlak vir die\n"
-"rekenaar te kies. 'n Algemene reel is dat die sekuriteit hoër behoort\n"
-"te wees indien die masjien belangrike inligting bevat, of direk aan\n"
-"die Internet gekoppel is. Hierdie hoër sekuriteit kom met die koste dat\n"
-"dit algemene gebruik op die rekenaar moeiliker maak.\n"
-"\n"
-"Indien u onseker is oor wat om te kies, bly by die verstek opsie. U\n"
-"kan altyd later die vlak verander deur draksec in die Mandriva Linux "
-"Control\n"
-"Center te grbruik.\n"
-"\n"
-"Die \"%s\" veld kan boodskappe stuur na 'n gekose persoon wat\n"
-"verantwoordelik is vir die sekuriteit. Hy/sy sal dan gereelde boodskappe\n"
-"ontvang rakende die stand van die sekuriteit."
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Sekuriteits-admin:"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nou moet u asseblief besluit watter partisie(s) u gaan gebruik vir die\n"
-"installasie van u Mandriva Linux rekenaar.Indien die partisies reeds\n"
-"geskep is gedurende 'n vorige GNU/Linux installasie of deur 'n ander\n"
-"partisie-program, kan u hulle gebruik.Indien nie, moet u eerstens\n"
-"partisies skep.\n"
-"\n"
-"Die skep van 'n partisie behels dat u 'n hardeskyf kies.U kan klik op\n"
-"\"hda\" om die eerste IDE hardeskyf te kies, \"hdb\" is die tweede ens.\n"
-"\"sda\" is die eerste SCSI skyf.\n"
-"\n"
-"Hier is die opsies wanneer u partisies skep op die gekose hardeskyf:\n"
-"\n"
-" * \"%s\": hierdie opsie wis alle partisies op die gekose skyf uit.\n"
-"\n"
-" * \"%s\": hierdie opsie sal outomaties 'ext3' en 'swap' partisies in die\n"
-"vrye spasie op die hardeskyf skep.\n"
-"\n"
-"\"%s\": gee u toegang tot verdere keuses:\n"
-"\n"
-" * \"%s\": stoor die partisielys op 'n disket. Handig indien u later die\n"
-"partisielys wil herstel.Ons beveel hierdie stap aan.\n"
-"\n"
-" * \"%s\": stel u in staat om 'n vorige gestoorde partisielys van 'n\n"
-"disket af te herstel.\n"
-"\n"
-" * \"%s\": indien u partisielys beskadig is, kan u poog om dit te\n"
-" herstel met hierdie opsie. Wees asseblief versigtig, en onthou\n"
-"dat dit nie altyd werk nie.\n"
-"\n"
-" * \"%s\": ignoreer al die veranderinge en herlaai die partisielys wat\n"
-"oorspronklik op die hardeskyf was.\n"
-"\n"
-" * \"%s\": deur hierdie opsie NIE te merk NIE, sal u gebruikers verplig\n"
-"om verwyderbere media soos diskette en CD-ROMs self te heg en\n"
-"te ontheg.\n"
-"\n"
-" * \"%s\": gebruik die opsie indien u 'n assistent verlang wat sal help\n"
-" met die skep van partisies. Word aanbeveel indien u nie vertroud met\n"
-"die skep van partisies is nie\n"
-"\n"
-" * \"%s\": kanselleer al u veranderinge.\n"
-"\n"
-" * \"%s\": laat ekstra aksies toe op die partisies (tipe, opsies, formaat)\n"
-"en gee ook eksta inligting omtrent die hardeskyf.\n"
-"\n"
-" * \"%s\": sodra u klaar is, sal sal dit u veranderinge stoor\n"
-"\n"
-"Wanneer u die grootte spesifiseer, kan u die fyner verstellings spesifiseer\n"
-"deur u sleutelbord se Pyltjie sleutels te gebruik.\n"
-"\n"
-"Aandag: U kan enige opsie bereik deur die sleutelbort te gebruik. Gebruik\n"
-"bloot die [Tab] sleutel en die [Op/Af] pyltjies. om 'n partisie te kies\n"
-"\n"
-"Wanneer 'n partisie gekies is, kan u die volgende doen:\n"
-"\n"
-" * Ctrl-c om 'n nuwe partisie te skep (mits 'n leë partisie gekies is)\n"
-"\n"
-" * Ctrl-d om 'n partisie uit te wis\n"
-"\n"
-" * Ctrl-m om 'n hegpunt te spesifiseer\n"
-"\n"
-"Om inligting rakende die verskillende beskikbare lêerstelsels te bekom, "
-"lees\n"
-"asseblief die ext2FS hoofstuk in die \"Reference Manual\".\n"
-"\n"
-"Indien u op 'n PPC masjien installeer, sal u 'n klien HFS 'bootstrap'\n"
-"partisie van ten minste 1MB wil skep. Dit sal deur 'yaboot' herlaai-\n"
-" stelsel gebruik word. Maak dit bietjie groter vir spaar 'kernel' en\n"
-"'ramdisk' beelde vir hulp in nood situasies."
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Outoheg van verwyderbare media"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Skakel tussen normale/kenner modus"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Ons het meer as een Microsoft-partisie op u hardeskyf gevind.\n"
-"Kies dan nou die een wie se grootte u wil verander, om plek te maak\n"
-"vir u nuwe Mandriva Linux bedryfstelsel.\n"
-"\n"
-"Elke partisie is as volg gelys: \"Linux-naam\", \"Windows-naam\"\n"
-"\"Kapasiteit\".\n"
-"\n"
-"\"Linux-naam werk as volg\" \"tipe hardeskyf\", \"nommer van hardeskyf\",\n"
-"\"nommer van partisie\" (byvoorbeeld: \"hda1\").\n"
-"\n"
-"Indien u 'n IDE tipe hardeskyf het sal die tipe \"hd\" wees, en SCSI, sal \n"
-"\"sd\" wees\n"
-"\n"
-"Die nommer van die hardeskyf is altyd 'n letter, wat volg na \"hd\" of\n"
-"\"sd\".\n"
-"Met IDE hardeskywe:\n"
-"\n"
-" * \"a\" beteken \"meester-hardeskyf op die primêre IDE-beheerder\";\n"
-"\n"
-" * \"b\" beteken \"slaaf-hardeskyf op die primêre IDE-beheerder\";\n"
-"\n"
-" * \"c\" beteken \"meester-hardeskyf op die sekondêre IDE-beheerder\";\n"
-"\n"
-" * \"d\" beteken \"slaaf-hardeskyf op die sekondêre IDE-beheerder\";\n"
-"\n"
-"Met SCSI-hardeskywe, beteken 'n \"a\" die kleinste SCSI-ID,\"b\" sal\n"
-"dan die volgende ID verteenwoordig ens.\n"
-"\n"
-"\"Windows-naam\" is die letter van u hardeskyf onder Windoes ( die eerste\n"
-"skyf of partisie word \"C:\" genoem.)"
-
-#: help.pm:564
-#, fuzzy, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"%s\": ondersoek die huidige landskeuse. Indien u nie in daardie land\n"
-"is nie, klik op die \"%s\"-knoppie en kies die regte een. Indien u land\n"
-"nie in daardie lys teenwoordig is nie, kies die \"%s\"-knoppie vir 'n\n"
-"volledige lys."
-
-#: help.pm:569
-#, fuzzy, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"Hierdie stap word slegs gedoen indien ou GNU/Linux partisies op die\n"
-"rekenaar gevind is.\n"
-"\n"
-"DrakX moet nou weet of u 'n nuwe installasie of 'n opgradering van 'n\n"
-"bestaande Mandriva Linux wil doen:\n"
-"\n"
-" * \"%s\": Hierdie deel word grootliks gebruik vir 'n hele nuwe "
-"installasie.\n"
-"Indien u aan die hardeskywe se partisies of die lêerstelsel wil verander,\n"
-"moet u hierdie opsie kies. Maar u kan ook hierdie een kies indien u sekere\n"
-"van u partisies se data wil behou.\n"
-"\n"
-" * \"%s\": hierdie tipe installasie laat u toe om pakkette op te dateer\n"
-"wat deel uitmaak van u huidige Mandriva Linux installasie. Die partisies\n"
-"en gebruiker se data bly onveranderd. Ander stappe is baie dieselfde as\n"
-"'n normale installasie.\n"
-"\n"
-"Die gebruik van die 'Opdateer' opsie behoort reg te werk vir al die\n"
-"weergawes vanaf \"8.1\" en opwaarts. Ons raai u af on dit op weergawes\n"
-"ouer as \"8.1\" te probeer."
-
-#: help.pm:591
-#, fuzzy, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Afhangende van die verstek taal wat u kies, sal DrakX outomaties 'n\n"
-"betrokke steutelbord-konfigurasie kies. U mag moontlik 'n sleutelbord\n"
-"besit wat nie 100-persent ooreenstem met u taal nie: byvoorbeeld as u 'n\n"
-"Ingelse Sweed is, sal u dalk 'n sweedse sleutelbord besit. Hier is nog\n"
-"een: gestel jy is 'n Afrikaner wat werk in Quebec, u sal dalk met 'n ander\n"
-"tipe sleutelbord moet klaarkom as wat u gewoond is. Wel, hier kan u die\n"
-"gepaste sleutelbord uit 'n lys kies.\n"
-"\n"
-"Klik op die \"%s\"-knoppie vir 'n lys van al die ondersteunde sleutelborde\n"
-"\n"
-"Indien u 'n nie-Latynse sleutelbord kies, sal die volgende dialoog u\n"
-"toelaat om sleutel-bindings tussen Latynse en nie-Latynse uitlegte\n"
-"te kies."
-
-#: help.pm:609
-#, fuzzy, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"Die taal wat u hier kies sal die dokumentasie se taal, die installeer\n"
-"program, en rekenaar oor die algemeen, beïnvloed. Kies eerstens\n"
-"die area waar u woon, en daarna die taal wat u praat.\n"
-"( Jammer, geen inskrywing vir die wat 'nonsens' wou kies nie! )\n"
-"\n"
-"Deur op die \"%s\"-knoppie te klik, kan u ander tale by kies.\n"
-"Dit sal dan dokumentasie en programme toelaat in daardie ekstra tale.\n"
-"Sou daar byvoorbeeld Spaanse gebruikers op die masjien inteken, kies\n"
-"Afrikaans(of Engels) as die verstek taal en \"%s\" in die Gevorderde\n"
-"seksie.\n"
-"\n"
-"Deur 'n sekere taal te kies, sal vertalings, lettertipes,\n"
-"spelkykers ens vir die betrokke taal geïnstalleer word.\n"
-"\n"
-"Boonop kan die \"%s\" merkblokkie u toelaat om die gebruik van 'unicode\n"
-"(UTF-8)' af te dwing. Let daarop dat dit eksperimenteel is. Indien u "
-"verskillende tale met verskillende koderings kies, sal\n"
-"'nicode'-ondersteuning geïnstalleer word.\n"
-"\n"
-"Let tog daarop dat u nie verbind is tot slegs een ekstra taal nie. U kan 'n\n"
-"paar van hulle kies, as u nou regtig wild wil raak, installeer almal deur\n"
-"die \"%s\" blokkie te merk!\n"
-"Om tussen verskillende tale te skakel, gebruik \"/usr/bin/localedrake\"\n"
-"Wanneer die supergebruiker (root) dit doen sal dit die taal vir almal\n"
-"verander, en wanneer 'n gewone gebruiker dit doen , sal dit net vir\n"
-"daardie gebruiker verander."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "Espanol"
-
-#: help.pm:650
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"DrakX het gewoonlik geen probleme met die speur van die aantal muisknoppies\n"
-"nie. Indien wel, sal dit aanneem dat die muis twee knoppies het, en sal dan\n"
-"3-knop emulasie konfigureer. Die 3de knoppie kan \"gedruk\" word deur beide\n"
-"knoppies gelyktydig te klik. DrakX sal vanself weet watter tipe muis u het,\n"
-"of dit nou 'n PS/2, sierie of USB muis mag wees.\n"
-"\n"
-"Indien u muis 3 knoppies het, maar nie 'n wielletjie nie, kan u \"%s\" kies\n"
-"DrakX sal dan u muis so opstel dat die wielletjie gesimuleer word. Druk\n"
-"die middel knoppie en beweeg die muis op en af - maklik!\n"
-"\n"
-"Indien u moontlik 'n ander tipe muis wil spesifiseer, kies dit vanaf die\n"
-" voorsiende lys.\n"
-"\n"
-"Indien u gekose muis verskil van die verstek muis, sal 'n toetsskerm\n"
-"vertoon word. Gebruik die knoppies en wielletjie om seker te maak\n"
-"alles werk korrek.\n"
-"Indien u probleme ondervind, druk die spasiebalk of [ Enter ] sleutel om\n"
-"die toets te kansselleer en weer te kies.\n"
-"\n"
-"Wielmuise word soms verkeerdelik geïdentifiseer, dan moet u self u\n"
-"muis vanaf die lys kies.\n"
-"Maak tog seker u kies die regte poort waaraan die muis\n"
-"gekoppel is. Na u die muis gekies, en \"%s\" geklik het, sal 'n beeld van\n"
-" 'n muis verskyn.\n"
-"Rol die wielletjie om te bevestig dat dit korrek funksioneer. Sodra u\n"
-"die beeld van die muis se wielletjie sien reageer, kan u ook die knoppies\n"
-"en beweging van u muis toets."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "met wielletjie-emulasie"
-
-#: help.pm:681
-#, fuzzy, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Enige PS/2 & USB muis"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
-"ttyS0 onder GNU/Linux is."
-
-#: help.pm:688
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Hierdie is die belangrikste oomblik vir u GNU/Linux-rekenaar se sekuriteit:\n"
-"u moet 'n wagwoord voorsien vir \"root\". \"Root\" is die supergebruiker "
-"wat\n"
-"dinge doen soos om die sagteware op te dateer, gebruikers by te voeg,\n"
-"en die konfigurasie te verander. \"Root\" kan alles doen! Hieroor moet\n"
-"u 'n deeglike wagwoord vir \"root\" kies - (DrakX sal jou tune as die wag-\n"
-"woord nie op spec is nie.) U kan wel die wagwoord uitlaat, maar dit word\n"
-"te sterkste afgeraai. GNU/Linux is net so vatbaar vir foute soos enige\n"
-"ander bedryfstelsel. Aangesien \"root\" geen perke het nie, kan hy/sy\n"
-"maklik skade aanrig as die persoon roekeloos handel. Dit moet dus\n"
-"moeilik wees vir 'n persoon om \"root\" te word.\n"
-"\n"
-"Die wagwoord behoort 'n mengsel van letters en syfers te wees en ten minste\n"
-"8 karakters lank te wees. Moet dit nie neerskryf nie, dit veroorsaak 'n\n"
-"swak skakel\n"
-"\n"
-"Moet dit ook nie te vreemd maak nie, u moet dit tog kan onthou!\n"
-"\n"
-"Indien u gebruik maak van 'n eksterne bediener wat die toegang beheer,\n"
-"klik op die \"%s\"-knoppie.\n"
-"\n"
-"Indien u netwerk gebruik maak van LDAP, NIS of 'n Windows PDC, moet\n"
-"u die gepaste diens vir \"%s\" kies. Vra u administrateur indien u nie weet\n"
-"watter een om te kies nie.\n"
-"\n"
-"Indien u probleme ondervind om wagwoorde te onthou, en die rekenaar is\n"
-"ver van die Internet af, en u vertrou almal wat die masjien gebruik, kan u\n"
-"kies om \"%s\" te gebruik. -once & heavy!-"
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "magtiging"
-
-#: help.pm:725
-#, fuzzy, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"LILO en grup is herlaaistelsels vir GNU/Linux. Hierdie stap is normaalweg\n"
-"geheel en al outomaties. DrakX sal u hardeskyf se selflaai-sektor nagaan\n"
-"en dienooreenkomstig handel met wat dit vind:\n"
-"\n"
-" * indien 'n Windows selflaai-sektor teenwoordig is, sal dit met 'n grub/\n"
-"LILO een vervang word. Dit sal u toelaat om te kan kies watter\n"
-"bedryfstelsel om te laai sodra u die masjien aanskakel.\n"
-"\n"
-" * indien 'n grub of LILO selflaai-sektor teenwoordig is, sal dit vervang\n"
-"word.\n"
-"\n"
-"Indien DrakX nie self kan besluit nie, sal u gevra word om 'n ligging vir\n"
-"die herlaaistelsel te voorsien. Gewoonlik is die veiligste plek \"%s\". Deur "
-"\"%s\" te kies, sal DrakX geen herlaaistelsel installeer nie."
-
-#: help.pm:742
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Dit is nou tyd om u drukkerstelsel te kies. Ander bedryfstelsels sal\n"
-"seker net een aan u bied, maar Mandriva Linux gee twee. Elk van hulle\n"
-"is beter as die ander in sekere gevalle.\n"
-"\n"
-" * \"%s\" -- wat vir \"print, do not queue\" staan. Kies dit indien u\n"
-"'n direkte konneksie na die drukker het, en u blitsig wil inmeng sodra\n"
-"daar probleme is, ook indien u nie netwerk-drukkers het nie. (\"%s\"\n"
-"hanteer net eenvoudige netwerk-toegang en is effe stadig deur die netwerk)\n"
-"Ons beveel aan dat u \"pdq\" gebruik indien u nog groen is met GNU/Linux.\n"
-"\n"
-" * \"%s\" - 'Common Unix Printing System', is 'n uitstekende keuse om na\n"
-"u plaaslike drukker, of na een in myle vanaf u, te druk. Eenvoudig om\n"
-"op te stel, kan kliënt of bediener rolle vertolk vir die lpd-fossiel. Dit\n"
-" beteken dat ons omsien na ons veterane! Dit is baie kragtig, maar 'n\n"
-"elementêre opstel is byna so maklik soos \"pdq\". Indien u 'n lpd-\n"
-"bediener wil nastreef, maak seker dat u die \"cups-lpd\"-daemoon\n"
-"loop. \"%s\" sluit grafiese programme in om vanaf te druk of om\n"
-"opsies te keis en drukkers te bestuur.\n"
-"\n"
-"Sou u die keuse nou, later wil verander, gaan gerus na 'PrinterDrake'\n"
-"in die 'Mandriva Linux Control Center' en klik op die \"Kenner\" knoppie."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Ervare"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX sal eerstens vir IDE toestelle op die rekenaar soek.\n"
-"Daarna sal dit probeer om vir PCI SCSI-kaarte te kry.\n"
-"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer\n"
-"om te gebruik sal dit outomaties installeer word.\n"
-"\n"
-"Omrede hierdie proses nie altyd alles opspoor nie, sal u dalk self u\n"
-"hardeware moet spesifiseer.\n"
-"\n"
-"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige\n"
-"spesifieke opsies.\n"
-"U kan egter DrakX toelaat om self die hardeware te ondervra. Dit werk\n"
-"gewoonlik die beste.\n"
-"\n"
-"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die\n"
-"Windows-bedryfstelsel te bekom.\n"
-"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
-
-#: help.pm:786
-#, fuzzy, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\" die bespeurde klankkaart op u rekenaar sal hier vertoon word.\n"
-"Indien die aangeduide klankkaart verskil van die werklike een op u\n"
-"rekenaar,\n"
-"kan u op die knoppie klik, om 'n ander drywer te kies."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Klankkaart"
-
-#: help.pm:791
-#, fuzzy, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"DrakX sal u 'n oorsig bied van u rekenaar se inligting. Afhangende van die\n"
-"sagteware wat u geïnstalleer het, sal u sommige of al die volgende\n"
-"afdelings hê. Elke inskrywing bestaan uit die item wat gekonfigureer\n"
-"moet word, asook 'n kernopsomming oor die huidige stand.\n"
-"Klik op die ooreenkomstige \"%s\"-knoppie om dit te verander.\n"
-"\n"
-" * \"%s\": bekyk die huidige sleutelbord-uitleg en verander indien nodig.\n"
-"\n"
-" * \"%s\": bekyk die huidige keuse van u land. Indien u nie in hierdie land\n"
-"woon nie, klik op die \"%s\"-knoppie om 'n ander te kies. Sou dit nie in\n"
-"die lys wees nie, klik op die \"%s\"-knoppie vir 'n volledige lys.\n"
-"\n"
-" *\"%s\": By verstek word u tydsone aangepas, afhangende van die land\n"
-"wat u kies. Klik op die \"%s\"-knoppie indien dit verkeerd is.\n"
-"\n"
-" * \"%s\": ondersoek die huidige muiskonfigurasie en klik op die knoppie\n"
-"on dit te verander.\n"
-"\n"
-" * \"%s\": deur op die \"%s\"-knoppie te klik, sal u die drukker-assistent\n"
-"loods. Raadpleeg die ooreenkomstige hoofstuk in die \"Starter Guide\"\n"
-"vir meer inligting daaroor.\n"
-"\n"
-" * \"%s\": sou ons 'n klankkaart opspoor op die rekenaar, sal dit hier\n"
-"vertoon word. Indien u verskil van ons keuse, klik op die knoppie om\n"
-"'n ander drywer te kies.\n"
-"\n"
-" * \"%s\": DrakX stel u skerm op met 'n resolusie van \"800x600\"\n"
-" of \"1024x768\" by verstek. Indien u wil verander, kan u \"%s\"\n"
-"kies om dit te herkonfigureer.\n"
-"\n"
-" * \"%s\": indien 'n TV-kaart opgespoor is, sal dit hier vertoon. Inidien\n"
-"nie, en u het wel een, klik op \"%s\" om dit self op te stel.\n"
-"\n"
-" * \"%s\":  indien 'n ISDN-kaart opgespoor is, sal dit hier vertoon. Klik\n"
-"op \"%s\" om verstellings daarop aan te bring\n"
-"\n"
-" * \"%s\": Indien u die netwerk en Internet toegang nou wil opstel\n"
-"\n"
-" * \"%s\": hier kan u die sekuriteitsvlak verander wat in 'n vorige stap \n"
-"opgestel is.\n"
-"\n"
-" * \"%s\": Indien die masjien toegang tot die Internet sal hê, kan u gerus\n"
-"u rekenaar beskem teen die hansworse daar buite, deur 'n vuurmuur op te\n"
-"stel. Lees gerus meer daaroor op in die \"Starter Guide\"\n"
-"\n"
-" * \"%s\": indien u die herlaaistelsel se konfigurasie wil verander. Word\n"
-"meer vir slimkoppe aanbeveel.\n"
-"\n"
-" * \"%s\": hier kan u fyner verstellings maak op die dienste wat sal afskop\n"
-"Ondersoek dit gerus indien u die rekenaar as bediener gaan gebruik."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Tydsone"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "TV-kaart"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "ISDN-kaart"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Grafiese koppelvlak"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Netwerk"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Instaan bedieners"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Sekuriteitsvlak"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Vuurmuur"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Herlaaistelsel"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Dienste"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Kies die hardeskyf wat u wil wis, om u nuwe Mandriva Linux\n"
-"te kan installeer. Wees tog versigtig, alle huidige data op daardie\n"
-"partisie sal vernietig word!"
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Klik op \"%s\" sou u al die data an al die partisies wat tans op hierdie\n"
-"hardeskyf is wil uitwis. Wees versigtig! Na u \"%s\" geklik het, sal u nie\n"
-"weer enige van die data of partisies kan red nie, dit sluit data op\n"
-"Windows-partisies in.\n"
-"\n"
-"Klik op \"%s\" indien u hierdie aksie wil staak, sonder om data te verloor."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Volgende ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Vorige"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kan nie die toegang tot die 'kernel'-modules vir hierdie 'kernel' kry nie. "
-"( lêer %s is soek). Dit beteken normaalweg dat u selflaaiskyf verskil van "
-"die Installasie-media sin ( skep assebleif 'n nuwer disket)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "U moet ook %s formatteer"
-
-#: install_any.pm:406
-#, fuzzy, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Beskik u oor nog?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, fuzzy, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr "Het u enige %s koppelvlakke?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CDROM"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (http)"
-msgstr "Netwerk %s"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (ftp)"
-msgstr "Netwerk %s"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr ""
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Geen toestelle gevind nie"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr ""
-
-#: install_any.pm:489
-#, fuzzy, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Kon nie vurk nie: %s"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr ""
-
-#: install_any.pm:558
-#, fuzzy, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Kan nie %s op %s vind nie"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Verander u CDROM!\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK."
-
-#: install_any.pm:738
-#, fuzzy, c-format
-msgid "Copying in progress"
-msgstr "Bespeuring aan die gebeur"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"U het die volgende bediener(s) gekies: %s\n"
-"\n"
-"\n"
-"Hierdie bedieners is aktief by verstek. Sover bekend, het hulle nie enige\n"
-"sekuriteits-gevare nie. Daar mag wel mettertyd nuwe gevare gevind word.\n"
-"In so geval, moet u tot verseker dat u hulle so gou moontlik updateer.\n"
-"\n"
-"\n"
-"Verlang u nog steeds hierdie dienste?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Die volgende pakkette moet verwyder word om u rekenaar op te gradeer: %s\n"
-"\n"
-"\n"
-"Wil u werklik dat ons hulle verwyder?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fout met die lees van lêer %s"
-
-#
-#: install_any.pm:1559
-#, fuzzy, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Die volgende pakkette geïnstalleer word:\n"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"'n Fout het voorgekom - geen geldige toestelle om die nuwe lêerstelsels op "
-"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr ""
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "Ftp"
-
-#: install_any.pm:1643
-#, fuzzy, c-format
-msgid "NFS"
-msgstr "PFS"
-
-#: install_any.pm:1666
-#, fuzzy, c-format
-msgid "Please choose a media"
-msgstr "Kies asseblief"
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr ""
-
-#: install_any.pm:1710
-#, fuzzy, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Lêer bestaan alreeds. Moet dit gebruik word?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Kan nie skermfoto's neem voor partisie skep nie"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Skermfoto's sal na die installasie beskikbaar wees in %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Stelsel-installasie"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Stelsel-konfigurasie"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
-"U kan inligting hieroorvind by %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"U moet 'n wortelpartisie definieer.\n"
-"Skep 'n partisie of kliek op 'n bestaande een.\n"
-"Kies dan Hegpunt en stel dit dan '/'."
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"U het nie 'n ruilpartisie nie\n"
-"\n"
-"Wil u steeds voortgaan?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Tekort aan oop spasie vir die nuwe partisies"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Gebruik bestaande partisies"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Daar is geen bestaande partisies om te gebruik nie"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik vir die Windows-partisie vir teruglus"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Watter partisie wil u vir Linux4Win gebruik?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Kies die groottes"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "'root'-partisiegrootte in MB:"
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Ruilpartisiegrootte in MB: "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Daar is geen FAT partisies om as teruglus (nie genoeg spasie nie) te gebruik "
-"nie"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Watter partisie se grootte wil u verander?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
-"Fout: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Bereken die grootte van die Windowspartisie"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WAARSKUWING\n"
-"\n"
-"DrakX gaan nou u Windows-partisie vestel. WEES VERSIGTIG:\n"
-"Hierdie aksie kan gevaarlik wees. Indien nog nie, moet u tog\n"
-"\"chkdsk c:\" loop vanaf die instruksielyn in Windows. (let daarop\n"
-"die grafiese \"scandisk\" is nie voldoende nie - GEBRUIK \"chkdsk\"!)\n"
-"U kan ook gerus \"defrag\" daarna loop, en u data rugsteun\n"
-"Begin dan weer hierdie installasie.\n"
-"Andersins, klik op OK."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Watter grootte wil u vir Windows behou?"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "partisie %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Windowslêerstelselgrense word bereken"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-grootteverandering het gefaal: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Daar is geen FAT partisies om te verander nie(nie genoeg spasie nie)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Verwyder Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"U het nou partisie %s partisioneer.\n"
-"Wanneer u klaar is, stoor u veranderinge met 'w'."
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Ek kon geen plek vir installasie vind nie."
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisionering het misluk: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Netwerk op pad op"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Netwerk op pad af"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"Waarskuwing: Oopbronsagteware is nie noodwendig vry van patente nie.\n"
-"Sommige van die sagteware hier ingesluit mag dalk gedek wees deur\n"
-"patente in die land waar u woon.\n"
-"Die MP3-dekodeerders wat hier ingesluit word, benodig moonlik 'n\n"
-"lisensie om wettiglik gebruik te kan word.(http://www.mp3licensing.com)\n"
-"Indien u onseker is oor 'n patent, raadpleeg die plaaslike wette.\n"
-"( Wees daarom bly jy woon nie in die VSA nie! )"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: install_messages.pm:131
-#, fuzzy, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Geluk, installasie is afgehandel.\n"
-"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
-"\n"
-"\n"
-"Vir inligting oor hierdie vrystelling van Mandriva Linux,\n"
-"bekyk die errata beskikbaar op\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
-"hoofstuk in die Offisiële Mandriva Linux Gebruikersgids."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikaat hegpunt %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Sekere belangrike pakkette het nie korrek geïnstalleer nie.\n"
-"Óf die CDROM-aandrywer óf die CD is foutief.\n"
-"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl media/main/*.rpm"
-"\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gaan stap '%s' binne\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Kies Pakketgroepe"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Foutiewe pakket"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Weergawe: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Grootte: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Belangrikheid: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "deur %s wat soek is"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "deur problematiese %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "probeer promosie van %s"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "om %s te kan behou"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
-"beskikbaar is nie"
-
-#
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Ons gaan die volgende pakette installeer"
-
-#
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Die volgende pakkette gaan verwyder word"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geïnstalleer"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Wys outogeselekteerde pakkette."
-
-#: install_steps_gtk.pm:389
-#, fuzzy, c-format
-msgid "Load/Save selection"
-msgstr "Pakketkeuse"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Pakketseleksie word opgedateer"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Minimale installasie"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Kies die pakkette wat u wil installeer"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Besig met installasie"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Skatting"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Geen Detail"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Tyd oor "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Wag asb. installasie word voorberei"
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d pakkette"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Installeer pakket %s"
-
-#
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Weier"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verander u CDROM!\n"
-"\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
-"nie\n"
-"hieroor beskik nie, druk Kanselleer om installasies vanaf dié CDROM te vermy."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Daar was 'n fout met pakkette:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Gaan steeds voort?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "nie gekonfigureer nie"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Lisensieooreenkoms"
-
-#: install_steps_interactive.pm:89
-#, fuzzy, c-format
-msgid "Release Notes"
-msgstr "Vrystelling: "
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Kies asseblief u sleutelborduitleg."
-
-#: install_steps_interactive.pm:121
-#, fuzzy, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Hier is die volle lys van beskikbare lande"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Installeer/Opgradeer"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Is hierdie 'n installasie of opgradering?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Opgradeer %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Enkripsie-sleutel vir %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Kies is u tipe muistoestel."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Knoppie-emulasie"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Knop-2 Emulasie"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "3-Knop emulasie"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Stel PCMCIA op..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "IDE word opgestel"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "geen beskikbare partisies"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Deursoek partisies vir hegpunte"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Kies die hegpunte"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal  herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
-
-#: install_steps_interactive.pm:317
-#, fuzzy, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal  herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Kies die partisies om te formatteer"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Toets vir foutiewe areas?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Probleme met die ondersoek van lêerstelsel %s. Wil u die foute herstel? "
-"( neem kennis dat dit dataverlies kan meebring)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Soek vir beskikbare pakkette en herbou die rpm-databasis"
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Soek vir beskikbare pakkette"
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Ondersoek pakette wat reeds geïnstalleer is..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Soek vir pakkette om op te gradeer..."
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies 'n spieël waar die pakkette verkry kan word"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, fuzzy, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Las"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Stoor"
-
-#: install_steps_interactive.pm:505
-#, fuzzy, c-format
-msgid "Bad file"
-msgstr "Laai lêer"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Tipe installasie"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"U het glad nie 'n groep pakkette gekies nie.\n"
-"Kies asseblief die tipe minimale installasie:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Met basiese dokumentasie (word aanbeveel!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Absolute minimale installasie (geen urpmi!)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Alles"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
-"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
-"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM getiteld \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Berei installasie voor"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installeer nou pakket %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Post-installasiekonfigurasie"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"U het nou 'n geleentheid om opgedateerde pakkette af te laai.Hierdie "
-"pakkette is opgedateer na die distribusie vrygestel is.\n"
-"Hulle mag moontlike sekuriteits-probleme en goggas regstel.\n"
-"\n"
-"Sou u hulle wil aflaai, benodig u 'n werkende Internetkonneksie.\n"
-"\n"
-"Wil u dit nou installeer?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Spieël word gekontak vir die lys van pakkette..."
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Kon nie die spieëlwebplek %s kontak nie"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Wil u weer probeer?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Wat is u tydsone?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Outo-tydsinkronisasie met NTP"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP-bediener"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Opsomming"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Stelsel"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Hardeware"
-
-#
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Eksterne CUPS-bediener"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Geen drukker"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Beskik u oor 'n ISA klankkaart?"
-
-#: install_steps_interactive.pm:1028
-#, fuzzy, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr "Loop \"sndconfig\" na die installasie om u klankkaart te konfigureer"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Geen klankkaart opgespoor nie. Probeer \"harddrake\" na die installasie"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Grafiese-koppelvlak"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Netwerk & Internet"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "gekonfigureer"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Sekuriteit"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "ge-aktiveer"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "ge-deaktiveer"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Selflaai"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s op %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Dienste: %d ge-aktiveer vir %d geregistreer"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "U het nog nie 'X' opgestel nie. Verlang u dit regtig?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Herlaaistelsel word voorberei..."
-
-#: install_steps_interactive.pm:1230
-#, fuzzy, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Dit wil voorkom of u 'n 'OldWorld' of Onbekende\n"
-"rekenaar het, die yaboot herlaaistelsel sal nie hier werk nie.\n"
-"Ons sal voortgaan met die installasie, maar u sal\n"
-"BootX of 'n ander manier moet gedruik om u rekenaar te selflaai"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Wil u aboot gebruik?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
-"word die eerste partisie vernietig?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"Met hierdie sekuriteitsvlak word toegang na lêers op die Windows partisie "
-"vernou na slegs die administrateur"
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sit 'n leë floppie in aandrywer %s"
-
-#: install_steps_interactive.pm:1294
-#, fuzzy, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Plaas die herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Outoinstallasieskyf word geskep."
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bepaalde stappe is nie afgehandel nie.\n"
-"\n"
-"Wil u werklik nou eindig?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Skep outoinstallasieskyf"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Die outomatiese installasie kan ten volle geoutomatiseer\n"
-"word, in daardie geval kan dit die hardeskyf oorskryf!!!\n"
-"(dit is vir die installasie op 'n ander rekenaar).\n"
-"\n"
-"U mag verkies om hierdie installasie elders te herhaal.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-" <Tab>/<Alt-Tab> tussen elemente  | <Space> selekteer | <F12> volgende skerm "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Kies 'n lêer"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Voeg by"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Verander"
-
-#
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Verwyder"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Basies"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Voltooi"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Doen"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Swak keuse, probeer weer\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "U keuse? (verstek %s) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Velde wat u moet invul:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "U keuse? (0/1, verstek %s) "
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Knoppie: %s: %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Wil u op hierdie knoppie klik?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "U keuse? (verstek '%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr " noem 'n leë inskrywing 'void'"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Daar is heelwat dinge om van te kies (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Kies asseblief die eerste getal van die 10-reeks wat u wil redigeer,\n"
-"of gebruik bloot [Enter] om voort te gaan.\n"
-"U keuse?"
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Aandag, 'n etiket het verander:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Dien weer in"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Tseggies (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Duits"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Spaans"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Finnies"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Fraans"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norweegs"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Pools"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Russies"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Sweeds"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "VK sleutelbord"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "VSA sleutelbord"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albanies"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Armenies (oud)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Armenies (tikmasjien)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Arabies"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latyns)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belgies"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bengali (Inscript-uitleg)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bengali (Probhat)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bulgaars (Foneties)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bulgaars (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brasiliaans (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosnies"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Belarussies"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Switsers (Duitse uitleg)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Switsers (Franse uitleg)"
-
-#: keyboard.pm:204
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Arabies"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Tseggies (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Duits (geen dooie sleutels)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanagari"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Deens"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (VSA)"
-
-#: keyboard.pm:213
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Norweegs)"
-
-#: keyboard.pm:215
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Norweegs)"
-
-#: keyboard.pm:217
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (VSA)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Norweegs)"
-
-#: keyboard.pm:220
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (Sweeds)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (Sweeds)"
-
-#: keyboard.pm:222
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Bosnies"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estoniaans"
-
-#: keyboard.pm:227
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Grieks"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Georgies (Russiese uitleg)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Georgies (Latynse uitleg)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Grieks"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Grieks (polytonies)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Gujarati"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Gurmukhi"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Kroaties"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Hongaars"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Iers"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Israelies"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Israelies (Foneties)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Iranies"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Yslandies"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Italiaans"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Inuktitut"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Japanees 106 sleutels"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kanada"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Koreaanse sleutelbord"
-
-#: keyboard.pm:254
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Arabies"
-
-#: keyboard.pm:255
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "VK sleutelbord"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Latyns-Amerikaans"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laoties"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Lituanies AZERTY (oud)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Lituanies AZERTY (nuut)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Lituanies \"nommerry\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanies \"foneties\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Lets"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malabaars"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Masedonies"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Myanmar (Burmese)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongools (cyrillic)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Maltese (UK)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Maltees (VSA)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Nederlands"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Oriya"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Pools (QWERTY uitleg)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Pools (QWERTZ uitleg)"
-
-#: keyboard.pm:277
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Pools"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portugees"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Kanadees (Quebec)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Romanies (QWERTZ)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Romanies (QWERTY)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Russies (Foneties)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Saami (noorweegs)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Saami (sweeds/fins)"
-
-#: keyboard.pm:289
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Thai sleutelbord"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Sloveens"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Serwies (Kirillies)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Siries"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Siries (Foneties)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telugu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamil (ISCII-uitleg)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamil (Tikmasjien-uitleg)"
-
-#: keyboard.pm:304
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Thai sleutelbord"
-
-#: keyboard.pm:305
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Thai sleutelbord"
-
-#: keyboard.pm:307
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Thai sleutelbord"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Tajik sleutelbord"
-
-#: keyboard.pm:315
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Duits"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Turks (tradisionele \"F\" model)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Turks (moderne \"Q\" model)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ukranies"
-
-#: keyboard.pm:322
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Oriya"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "VSA internasionale sleutelbord"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Uzbek (Kirillies)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Viëtnamees \"nommerry\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Jugoslaavs (latynse uitleg)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Regter Alt-sleutel"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Shift-sleutels gelyktydig"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "'Control' en 'Shift' sleutels gelyktydig"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "'Capslock'-sleutel"
-
-#: keyboard.pm:339
-#, fuzzy, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Ctrl- en Atl-sleutels tegelyk"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- en Atl-sleutels tegelyk"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt- en Shift-sleutels gelyktydig"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\"-sleutel"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Linker \"Windows\" sleutel"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Regter \"Windows\"-sleutel"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Beide Control-sleutels gelyktydig"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Beide Alt-sleutels gelyktydig"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Linker 'Shift'-sleutel"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Regter 'Shift'-sleutel"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Linker 'Alt'-sleutel"
-
-#
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Linker 'Control'-sleutel"
-
-#
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Regter 'Control'-sleutel"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Hier kan u die sleutel of sleutelkombinasie kies wat\n"
-"die sal help om tussen verskillende sleutelbord-uitlegte te wissel.\n"
-"(bv: latyns en iets anders)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"Hierdie verstelling sal aktief wees na die installasie.\n"
-"Gedurende installasie, moet u die regter 'Control'-sleutel\n"
-"gebruik om tussen die uitlegte te spring."
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andorra"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Verenigde Arabiese Emirate"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua and Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albanië"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Armenië"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Netherlands Antilles"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antartika"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Argentinië"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "American Samoa"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaijan"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnië en Herzegovina"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbados"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bulgaars"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benin"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet Eiland"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Botswana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Belarus"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Belize"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos-eilande"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Sentrale-Afrika Republiek"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Cook Eilande"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Chili"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Kameroen"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "China"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Colombië"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Serbia & Montenegro"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Kuba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Cape Verde"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Christmas Island"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Ciprus"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikaanse Republiek"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Algerië"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Egipte"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Westelike Sahara"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Ethiopië"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fidji"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falkland Islands (Malvinas)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Faroe Eilande"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gaboen"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Verenigde Koninkryk"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenada"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Georgia"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Frans-Guiana"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Ghana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Groenland"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gambia"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Guinee"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekwatoriale Guinea"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia and the South Sandwich Islands"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Guam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Guyana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Hong Kong SAR (China)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard en McDonald Eilande"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Kroasië"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haïti"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonesië"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Indië"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "British Indian Ocean Territory"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Irak"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Iran"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Ysland"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamaika"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Jordanië"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenia"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kyrgyzstan"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Kambodja"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Comoros"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts and Nevis"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Korea (Noord)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Korea"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Koeweit"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Cayman Eilande"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Liberië"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Litaue"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Letland"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Libië"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Marokko"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monaco"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldova"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Eilande"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Masedonië"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongolië"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Noordelike Mariana Eilande"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martinique"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Mauritanië"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malta"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Maldives"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malawië"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Maleisië"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mosambiek"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibië"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Nieu-Caledonië"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Niger"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Eiland"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nigerië"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepal"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauru"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Oman"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panama"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Peru"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Fraanse Polinesië"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua New Guinea"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Filippyne"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre en Miquelon"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palau"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Qatar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Hereniging"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Roemenië"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Saoedi-Arabië"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Eilande"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Seychelle"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sudan"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapoer"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Slovenië"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard en Jan Mayen Eilande"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senekal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somalië"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Suriname"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome and Principe"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Sirië"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks en Caicos Eilande"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Tsjad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "French Southern Territories"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tajikistan"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "East Timor"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunisië"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tonga"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Turkye"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad en Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzanië"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Oekraine"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Uganda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Verenigde State se Kliener Omliggende Eilande"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vatican"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent en die Grenadines"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virgin Eilande (Brits)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virgin Eilande (VSA)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Viëtnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis en Futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoa"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Yemen"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zambië"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
-
-#: lang.pm:1073
-#, fuzzy, c-format
-msgid "You should install the following packages: %s"
-msgstr "Installeer pakket %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom by %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Sirkulêre heg %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Verwyder eers die logiese volumes\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Parameters"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "GEEN"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Konfigurasie van module"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "U kan elke parameter van die module hier konfigureer"
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Het %s koppelvlakke gevind"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Beskik u oor nog?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Het u enige %s koppelvlakke?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Sien hardeware inligting"
-
-#: modules/interactive.pm:82
-#, fuzzy, c-format
-msgid "Installing driver for USB controller"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#: modules/interactive.pm:83
-#, fuzzy, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#: modules/interactive.pm:84
-#, fuzzy, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#: modules/interactive.pm:85
-#, fuzzy, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"U kan nou opsies vir module %s voorsien.\n"
-"Let daarop dat enige adresse voorafgegaan moet word deur 0x (bv '0x123')"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"U kan nou die opsies voorsien vir module %s.\n"
-"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bv. ``io=0x300 irq-7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Module opsies:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Watter %s drywer moet ek probeer?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
-"meeste gevalle dit nie nodig is nie. Wil u ekstra opsies voorsien of moet\n"
-"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
-"vries, maar sal nie skade veroorsaak nie."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Aftas"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Spesifieer opsies"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laai van module %s het gefaal.\n"
-"Wil u ander parameters probeer?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "'n syfer"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d komma-afgeskeie getalle"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d komma-afgeskeie teks"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "komma-afgeskeie getalle"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "komma-afgeskeie reekse"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Muis"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Standaard"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generiese PS2 wielmuis"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Outomaties"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 knop"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generiese 2-knop muis"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Generiese 3-knop Muis met Wielletjie-emulasie"
-
-#
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Wiel"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "seriaal"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generiese 3-knop muis"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan met wielletjie-emulasie"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Reeks (seriaal)"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Reeks (seriaal) met Wielletjie-emulasie"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Muis (seriaal, ou C7 tipe)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Muis (seriaal, ou C7 tipe) met wielletjie-emulasie"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse met Wiel-emulasie"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "busmuis"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 knoppies"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 knoppies"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3-knoppies met wielletjie-emulasie"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Universele"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Enige PS/2 & USB muis"
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "niks"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Geen muis"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr ""
-
-#
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Toets asb. die muis"
-
-#
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Om die muis te aktiveer,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG DIE WIEL!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "gebruik PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "gebruik PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "gebruik DHCP"
-
-#: network/adsl.pm:22
-#, fuzzy, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel speedtouch USB-modem"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr "reeds bespeur"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (gebruik PPPoA) usb"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (gebruik DHCP) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Konnekteer aan die internet"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"Die mees algemene metode vir ADSL is om  pppoe te gebruik.\n"
-"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
-"Indien u nie weet nie, kies 'gebruik PPPoE'."
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "Tipe ADSL-konneksie :"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Web-bediener"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Domeinnaam-bediener"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "SSH-bediener"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "FTP-bediener"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "e-Pos bediener"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP en IMAP bediener"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Telnet-bediener"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "CUPS-bediener"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Echo request (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr ""
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"drakfirewall konfigurasie\n"
-"\n"
-"Hiermee stel u 'n persoonlike vuurmuur op vir die Mandriva Linux\n"
-"rekenaar. Indien u 'n kragtige en toegewyde vuurmuur verlang, kyk\n"
-"dan gerus na die 'Mandriva Security Firewall'."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakefirewall assistent\n"
-"\n"
-"Maak seker dat u alreeds die Netwerk/Internet toegang opgestel het\n"
-"deur 'drakconnect' te gebruik."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Watter dienste wil u toelaat vanaf die Internet?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"U kan uiteenlopende poorte voorsien. \n"
-"Voorbeelde hiervan is: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Kyk gerus na '/etc/services' vir meer inligting."
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Ongeldige poort: %s.\n"
-"Die regte manier is \"poort/tcp\" of \"poort/udp\",\n"
-"waar poort tussen 1 en 65535 is.\n"
-"\n"
-"U kan ook 'n reeks poorte verskaf (bv. 24300:24350/udp)"
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Alles (geen vuurmuur)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Ander poorte"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Ek weet nie"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Selfdoen"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, fuzzy, c-format
-msgid "Manual choice"
-msgstr "selfdoen"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-kaart"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Selfdoen konfigurasie"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Outomatiese IP (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "Outomatiese IP (BOOTP/DHCP/Zeroconf)"
-
-#
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol vir die res van die wêreld"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europese protokol (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol vir die res vd wêreld \n"
-"geen D-Kanaal nie (bruikhuurlyne)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel speedtouch USB-modem"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Sagem USB-modem"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Bewan PCI-modem"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "ECI Hi-Focus modem"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Dynamic Host Configuration Protocol (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Selfdoen TCP/IP-konfigurasie"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "Point to Point Tunneling Protocol (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP oor Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP oor ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Bridged Ethernet LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Bridged Ethernet VC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "Routed IP LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "Routed IP VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Skriptipe"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Terminaaltipe"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Netwerk- & Internet-konfigurasie"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(op poort %s bespeur)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(%s bespeur)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(bespeur)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "LAN-konneksie"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Draadlose konneksie"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL-konneksie"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Kabelkonneksie"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN konneksie"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Modemkonfigurasie"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Kies die konneksie wat u wil konfigureer"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Ons gaan nou die %s konneksie konfigureer.\n"
-"\n"
-"\n"
-"Druk \"%s\" om voort te gaan."
-
-#
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Konneksiekonfigurasie"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Vul asb. die velde hieronder in"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "Kaart IRQ"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kaartgeheue (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "Kaart I/O"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "Kaart IO_0"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "Kaart IO_1"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "U persoonlike telefoonnommer"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Voorsienernaam (bv voorsiener.co.za)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Verskaffer se foonnommer"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "Voorsiener DNS 1 (opsioneel)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "Voorsiener DNS 2 (opsioneel)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Belmetode"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Konneksiespoed"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Konneksie tydlimiet (in sekondes)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Gebruikerskode"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Wagwoord"
-
-#: network/netconnect.pm:382
-#, fuzzy, c-format
-msgid "Cable: account options"
-msgstr "Opbelopsies"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Kies die netwerkkoppelvlak om op te stel:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Netwerk Toestel"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Eksterne ISDN modem"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Kies 'n toestel !"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurasie"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Oor watter tipe kaart beskik u?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm\n"
-"reg te wees.\n"
-"\n"
-"Indien u 'n PCMCIA-kaart het, moet u die IRQ en I/O van u kaart weet.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Gaan voort"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Staak"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Wat is u ISDN-kaart?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Drywer"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Watter protokol verlang u?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Kies u internetdiensvoorsiener.\n"
-"Indien nie in die lys nie kies Ongelys"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Verskaffer:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"U modem word nie ten volle deur Linux ondersteun nie.\n"
-"Probeer http://www.linmodems.org vir meer inligting."
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Kies die modem om op te stel:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Op watter seriepoort is u modem gekoppel?"
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Kies u verskaffer:"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Opbelopsies"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Konneksienaam"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Telefoonnommer"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Aantekenkode"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "Opbel: IP-Parameters"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "IP-Parameters"
-
-#
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP-adres"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Subnet-masker"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Opbel: DNS-inligting"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Domeinnaam"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-bediener (opsioneel)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "Verkry rekenaarnaam vanaf IP"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Portaal"
-
-#
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "Deurgang se IP-adres"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "ADSL-konfigurasie"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Kies asseblief ADSL-verskaffer"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"U benodig die 'Alcatel microcode'.\n"
-"U kan dit deur 'n disket voorsien, of deur u Windows partisie,\n"
-"of dit oorslaan en later doen."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Gebruik 'n disket"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Gebruik my Windows-partisie"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Doen dit later"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "Probleme met die kopieer van Fermware (Firmware), lêer %s is soek"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "Kopieer van Fermware was suksesvol"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"U benodig die Alcatel mikrokode.\n"
-"Laai dit af by:\n"
-"%s en kopieer die mgmt.o na '/usr/share/speedtouch'"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "Virtual Path ID (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "Virtual Circuit ID (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "Toevou metode :"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"The ECI Hi-Focus modem kan nie uit die boks ondersteun word uit nie.\n"
-"Besoek gerus  http://eciadsl.flashtux.org/ vir 'n drywer."
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, fuzzy, c-format
-msgid "Could not install the %s package!"
-msgstr "Installeer pakket %s"
-
-#
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Zeroconf rekenaarnaam resolusie"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Konfigureer netwerktoestel %s (drywer %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-"Die volgende protokolle kan gebruik word vir 'n LAN konneksie. Kies "
-"asseblief die een om te gebruik"
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
-"Elke item moet as 'n IP-adres in dot-desimalenotasie\n"
-"(1.2.3.4) gegee word."
-
-#
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Ken rekenaarnaam vanaf DHCP-adres toe."
-
-#
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "DHCP-rekenaarnaam"
-
-#
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Netmasker"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Warm-inprop Netwerk"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Begin tydens herlaaityd"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, fuzzy, c-format
-msgid "Metric"
-msgstr "beperk"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP-kliënt"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Konneksie tydlimiet (in sekondes)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "Die DNS-bediener se IP"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Deurgang IP-adres moet in 1.2.3.4. formaat wees"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "Pasop: IP-adres %s is alreeds gebruik !"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s is alreeds in gebruik\n"
-
-#: network/netconnect.pm:1167
-#, fuzzy, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Kies 'n eiemagtige drywer"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, fuzzy, c-format
-msgid "Install a new driver"
-msgstr "Installeer stelsel"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "Voorsien asseblief die inligting vir hierdie draadlose kaart:"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "Bedryfsvlak"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Ad-hoc"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Beheerde"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Meester"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Repeater"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Sekondêre"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Outo"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Netwerknaam (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "Netwerk-ID"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "Bedryfsfrekwensie"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "Sensitiwiteits behoud"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Bitrate (in b/s)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-"RTS/CTS voeg 'n handskud by alvorens 'n pakkie gestuur word. Dit\n"
-"is om seker te maak die tonnel is skoon. Dit voeg wel oorhoofse data\n"
-"by, maar kan beter resultate tot gevolge hê.\n"
-"Hierie parameter bepaal die kleinste pakkie vwaarvoor die node 'n RTS\n"
-"sal stuur. 'n Waarde gelyk aan die maksimun pakkie grootte sal dit\n"
-"de-aktiveer. U kan dit ook stel na Outo, bepaald of af."
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "Fragmentasie"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig program se ekstra argumente"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-"Hier kan u ekstra verstellings bepaal soos: ap, channel, commit, enc, power, "
-"retry, sens, txpower (nick is reeds gestel as die rekenaarnaam).\n"
-"\n"
-"Raadpleeg die iwconfig(8) man vir ekstra inligting."
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy program se ekstra argumente"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-"Iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
-"netwerk asook om die gehalte van elke koppeling van elk te lees.\n"
-"\n"
-"Hierdie inligting kan ook bekom word in /proc/net/wireless :\n"
-"gehalte van die koppeling, seinsterkte, en geraasvlakke.\n"
-"\n"
-"Raadpleeg die iwpspy(8) vir verdere inligting."
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv program se ekstra argumente"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-"Iwpriv stel u in staat om privaatheidsverstellings aan\n"
-"die draadlose netwerkkoppelvlak aan te bring.\n"
-"\n"
-"Iwpriv maak verstellings aan die spesifieke drywers (in teenstelling met "
-"iwconfig wat generiese verstellings doen)\n"
-"\n"
-"In teorie, behoort u al die nodige inligting vanaf die drywer\n"
-"se dokumentasie te kan bekom)\n"
-"\n"
-"Raadpleeg die iwpriv(8) vir verdere inligting."
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Freq moet 'n k, M of G agtervoegsel kry. (byvoorbeeld, \"2.6G\" vir 2.46Ghz "
-"frekwensie), of u moet genoeg 0'e (zero's) byvoeg."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Tempo moet agtervoegsels van k,M, of G kry (byvoorbeeld \"11M\" vir 11M) of "
-"voeg genoeg 0'e (zero'z) by."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''.\n"
-"U mag ook die netwerkhek byvoeg indien daar een is"
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-"Laaste, maar nie die minste nie, kan u ook die DNS-bediener(s) se IP(s) "
-"voorsien."
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Rekenaarnaam (opsioneel)"
-
-#
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Rekenaarnaam"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "DNS-bediener 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "DNS-bediener 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "DNS-bediener 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "Deursoek domein"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-"Die domein om te deursoek, sal by verstek vanaf die \"fully-qualified host "
-"name\" FQHN af kom"
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Deurgangspoort (bv. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Deurgangtoestel"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS-adres moet in 1.2.3.4. formaat wees"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Deurgang IP-adres moet in 1.2.3.4. formaat wees"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf Rekenaarnaam"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "'Zeroconf'-naam mag nie 'n '.' bevat nie"
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"U het meer as een internetkonneksiemetode opgstel.\n"
-"Kies die een wat u verlang.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Internetkonneksie"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Konfigurasie is voltooi, wil u hierdie verstellings toepas?"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-
-#: network/netconnect.pm:1478
-#, fuzzy, c-format
-msgid "Automatically at boot"
-msgstr "Begin tydens herlaaityd"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, fuzzy, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Die netwerk moet herbegin word. Wil u dit nou doen?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Netwerkkonfigurasie"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Daar was 'n probleem met die herlaai van die netwerk.\n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wil u nou aan die internet konnekteer?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Konneksie word getoets..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Die stelsel is nou aan die internet gekonnekteer."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Vir sekuriteitsreDES, word u nou gediskonnekteer."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Dit blyk dat u rekenaar geen toegang tot die Internet het nie.\n"
-"Probeer weer u konneksie konfigureer."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Daarsy dude / duDES, die netwerk en Internetkonfigurasie is voltooi.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nadat dit klaar is, sal dit beter wees om u X-omgewing te herlaai om die "
-"rekenaarnaamverandering-probleem te voorkom."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Probleme is tydens die konfigurasie ondervind.\n"
-"Toets u konneksie deur 'net_monitor' of 'mcc'. Indien u steeds probleme "
-"ondervind, konfigureer weer van voor af."
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Omdat u netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
-"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u "
-"Internet\n"
-"& Netwerkkonneksie te herkonfigureer.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"'n Onvoorsiene fout het gebeur:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Instaanbediener-konfigurasie"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP instaanbediener"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP-instaanbediener"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Instaanbediener moet begin met http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL moet begin met 'ftp' of 'http':"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Vuurmuurkonfigurasie gevind!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na die "
-"tyd self regstellings moet aanbring."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"Voorsien asseblief die koppelvlak-naam wat verbind is aan die Internet.\n"
-"\n"
-"Voorbeelde:\n"
-"\t\tppp+ vir modem of DSL konneksies, \n"
-"\t\teth0, or eth1 vir kabel konneksies, \n"
-"\t\tippp+ vir 'n isdn konneksie.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Plaas skyf in aandrywer"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Plaas 'n FAT-geformatteerde skyf in aandrywer %s met %s in die 'root' "
-"lêergids en druk %s"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Disket-toegangsfout, kan nie toestel %s heg nie"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "heg het gefaal: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
-"Die enigste oplossing is om die primêre partisie te skuif sodat die gat\n"
-"langs die ekstensie partisies is"
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Herstel van léer %s het gefaal: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Korrupte rugsteunlêer"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fout met die skryf van %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Iets vrots gebeur op u hardeskyf.\n"
-"'n Data-integriteitstoets het misluk.\n"
-"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
-"eindig."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "benodig"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "belangrik"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "baie oulik"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "oulik"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "moontlik"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "Stuur lêers..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(op %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(op hierdie rekenaar)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Gekonfigureer op ander rekenaars"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Op CUPS bediener\"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Verstek)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Druk sonder drukkertou"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Lyndrukkerdiensprogram"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Nuwe generasie LPR"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
-
-#: printer/data.pm:151
-#, fuzzy, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
-
-#
-#: printer/data.pm:152
-#, fuzzy, c-format
-msgid "Remote CUPS"
-msgstr "Eksterne CUPS-bediener"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Onbekende Model"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Plaaslike drukker"
-
-#
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Eksterne drukker"
-
-#
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Eksterne CUPS-drukker"
-
-#
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Eksterne LPD-drukker"
-
-#
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkdrukker (TCP/sok)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Eksterne Netware-drukker"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Tik drukkertoestel se URI in"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Pyp drukstuk na program"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "word aanbeveel"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Onbekende model"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "Gekonfigureer op hierdie rekenaar"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " op pallelle poort #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", USB-drukker #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", USB-drukker"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", HP drukker op 'n parallele poort"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", HP drukker op USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", HP drukker op 'HP JetDirect'"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", HP drukker"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", multi-funksionele toestel op parallele poort #%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", multi-funksionele toestel op 'n parallelle poort"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", multi-funksionele toestel op USB"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-funksionele toestel op 'HP JetDirect'"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", multi-funksionele-toestel"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", drukwerk gestuur na %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "op LPD-bediener \"%s\", drukker \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP rekenaar \"%s\", poort %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "op SMB/Windows-bediener \"%s\", deelarea \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " op Novell bediener \"%s\", drukker \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", gebruik opdrag %s"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Parallelle poort #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "USB drukker #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "USB-drukker"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "HP drukker op 'n parallele poort"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "HP drukker op USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "HP drukker op 'HP JetDirect'"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "HP drukker"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Multi-funksionele toestel op parallelle poort #%s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "multi-funksionele toestel op parallelle poort"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "Multi-funksionele toestel op USB"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "Multi-funksionele toestel op 'HP JetDirect'"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Multi-funksionele-toestel"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Druk na %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "LPD bediener \"%s\"/, drukker \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "TCP/IP rekenaarnaam \"%s\", poort %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "SMB/Windows-bediener \"%s\", deelarea \"%s\""
-
-#
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Novell-bediener \"%s\", drukker \"%s\""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "Gebruik opdrag %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Onverwerkte (direkte) drukker"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Plaaslike netwerk(e)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Koppelvlak \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Netwerk %s"
-
-#
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Rekenaar %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Poort %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "CUPS-drukkerkonfigurasie"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Hier kan u kies of die drukkers wat aan hierdie masjien beskikbaar sal wees "
-"aan eksterne rekenaars en watter rekenaars dit sal wees."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"U kan ook hier besluit indien eksterne drukkers outomaties op hierdie "
-"rekenaar beskikbaar gestel behoort te word."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Die drukkers op hierdie rekenaar is beskikbaar aan ander rekenaars"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Vind beskikbare drukkers op eksterne rekenaars outomaties"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Deel drukkers op rekenaars/netwerke:"
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Aanpas-konfigurasie"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Geen eksterne masjiene"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Bykomende CUPS-bedieners: "
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Om toegang tot eksterne CUPS-bedieners in u plaaslike netwerk te bekom, kies "
-"die \"Vind beskikbare drukkers op eksterne rekenaars outomaties\" opsie. die "
-"CUPS-bedieners sal u rekenaar outomaties verwittig oor hulle drukkers. Al "
-"die drukkers wat tans bekend is aan u rekenaar sal in \"Eksterne drukkers\" "
-"gelys wees (in Printerdrake). Indien u CUPS-bediener(s) nie op die plaaslike "
-"netwerk is nie, sal u self die IP adres(se) en ook opsioneel hulle poort(e) "
-"moet voorsien, om die inligting oor hulle drukkers te verkry."
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Japanese teks-drukmodus"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Deur hierdie keuse kan u standaard tekslêers in japanees druk. Kies dit "
-"SLEGS indien u japanese tekslêers wil druk, indien dit geaktiveer is kan u "
-"nie geaksentueerde karakters in latynse lettertipes druk nie, u sal ook nie "
-"die kantlyne of karaktergrottes kan verstel nie. Die verstelling affekteer "
-"slegs plaaslike drukkers. Indien u japanese teks op 'n eksterne drukker wil "
-"druk, moet u dit op daardie drukker se rekenaar aktiveer."
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Outomatiese korreksie van CUPS konfigurasie"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Indien hierdie opsie gekies is, sal dit elke keer wanneer CUPS begin, "
-"verseker dat:\n"
-"\n"
-"- indien LPD/LPRng geïnstalleer is, CUPS nie die '/etc/printcap' lêer\n"
-" sal vernietig nie.\n"
-"\n"
-"- indien '/etc/cups/cupsd.conf' ontbreek, dit geskep sal word.\n"
-"\n"
-"- indien inligting oor die drukker uitgesaai word, die bediener se naam nie\n"
-"\"localhost\"  sal wees nie.\n"
-"\n"
-"Indien sommige van hierdie punte probleme vir u mag skep, moet nie die "
-"opsie\n"
-"kies nie , maar dit in gedagte hou."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Op"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Af"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Deel van plaaslike drukkers"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Hierdie is die rekenaars en netwerke waarop die plaaslik-gekoppelde drukker"
-"(s) beskikbaar behoort te wees."
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Voeg rekenaar/netwerk by"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Redigeer gekose rekenaar/netwerk"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Verwyder gekose rekenaar/netwerk"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "IP-adres van rekenaar/netwerk"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Kies die netwerk of rekenaar waarop die plaaslike drukkers beskikbaar\n"
-"gestel moet word:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "Rekenaar/netwerk se IP uitstaande."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Die voorsiende rekenaar/netwerk-IP is foutief\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Voorbeelde van korrekte IPs:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Die rekenaarnaam/netwerk is alreeds gelys, en kan nie weer bygevoeg\n"
-"word nie.\n"
-
-#
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Verkry toegang na eksterne CUPS-bedieners"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Voeg die CUPS-bedieners, wie se drukkers u wil gebruik, hier by. U hoef dit "
-"slegs te doen indien die bedieners nie hulle drukkers se inligting uitsaai "
-"oor die plaaslike netwerk nie."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Voeg bediener by"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Redigeer gekose bediener"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Verwyder gekose bediener"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Voorsien die IP-adres en poort, van die rekenaar, wie se\n"
-"drukkers u wil gebruik."
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Indien geen poort verskaf word nie, sal 631 gebruik word."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "Bediener se IPontbreek!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Die voorsiende IP is nie reg nie.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Die poortnommer moet 'n heeltal wees."
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Jammer, hierdie bediener is reeds deel van die lys.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Poort"
-
-#
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, fuzzy, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Eksterne LPD-drukker"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, fuzzy, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Rekenaar/netwerk se IP uitstaande."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Drukkerdata word gelees..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Herbegin CUPS..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Kies drukkerkonneksie"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Hoe is die drukker gekoppel?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier op te stel "
-"nie; drukkers word outomaties bespeur."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"PASOP: Daar is geen plaaslike netwerkkonneksie aktief nie. Netwerk drukkers "
-"kan nie opgespoor of getoets word nie!"
-
-#: printer/printerdrake.pm:627
-#, fuzzy, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr "Drukker-outospeur ( Plaaslik, TCP/Sok, en SMB-drukkers)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, fuzzy, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
-
-#
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Deursoek u rekenaar..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "en een onbekende drukker"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "en %d onbekende drukkers"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Die volgende drukkers\n"
-"\n"
-"%s%s\n"
-"is direk aan u rekenaar gekoppel"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Hierdie betrokke drukker\n"
-"\n"
-"%s%s\n"
-"is direk aan u rekenaar gekoppel."
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Die volgende drukker\n"
-"\n"
-"%s%s\n"
-"is direk aan u rekenaar gekoppel"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Daar is een onbekende drukker wat direk aan u rekenaar gekoppel is"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Daar is %d onbekende drukkers direk aan u rekenaar gekoppel"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Geen drukkers te vinde wat direk aan u rekenaar gekoppel is nie"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Maak seker dat alle drukkers gekoppel en aangeskakel is).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Wil u drukwerk toelaat op bogenoemde drukkers, of op drukkers in u plaaslike "
-"netwerk?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Wil u drukwerk op drukkers in die plaaslike netwerk toelaat?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Wil u drukwerk aktiveer op bogenoemde drukkers?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Is u seker dat u drukwerk op hierdie rekenaar wil opstel?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"NEEM KENNIS: Afhangende van die model drukker en die drukkerstelsel wat u "
-"gaan gebruik, kan tot %d MB ekstra sagteware geïnstalleer word."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Opsoek na nuwe drukkers..."
-
-#: printer/printerdrake.pm:833
-#, fuzzy, c-format
-msgid "Found printer on %s..."
-msgstr "Verwyder drukker \"%s\"..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " on "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Drukkermodelkeuse"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Oor watter tipe drukker beskik u?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"Printerdrake kon nie u drukker (%s) se model bepaal nie. Kies asseblief die "
-"korrekte model vanaf die lys."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Indien u drukker nie gelys is nie, kies 'n versoenbare (verwys na u drukker "
-"se handleiding) of 'n soortgelyke een."
-
-#: printer/printerdrake.pm:875
-#, fuzzy, c-format
-msgid "Configuring printer on %s..."
-msgstr "Konfigureer drukker \"%s\" ..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigureer drukker \"%s\" ..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Voeg drukker by"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Welkom by die 'Printer Setup Wizard'\n"
-"\n"
-"Hierdie assistent help met die installasie van plaaslike en eksterne "
-"drukkers wat vanaf hierdie en ander masjiene gebruik gaan word\n"
-"\n"
-"Dit sal vir die nodige inligting vra om die drukker op te stel, dit gee u "
-"toegang tot alle beskikbare drywers, drywer opsies en konneksie tipes."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Welkom by die \"Printer Setup Wizard\"\n"
-"\n"
-"Hierdie wysgeer sal u help op u drukker(s) op te stel, hetsy hulle direk aan "
-"die rekenaar, direk aan die netwerk, of aan 'n eksterne Windows rekenaar\n"
-"gekoppel is.\n"
-"\n"
-"Maak tog seker die drukker(s) is reg gekoppel en aangeskakel, sodat "
-"outospeur sy werk reg kan doen. Maak ook seker u netwerkdrukker(s) en "
-"Windows drukker bedieners aangeskakel en gekonnekteer is.\n"
-"\n"
-"Let ook tog dat autospeur van drukkers oor die netwerk langer neem as die "
-"outospeur van plaaslike drukkers. U kan gerus die outospeur van netwerk en/"
-"of Windows-drukker-bedieners versper indien u dit nie gaan gebruik nie.\n"
-"\n"
-"Klik op \"Volgende\" sodra u gereed is, of op \"Kanselleer\" indien u NIE "
-"nou enige drukkers wil opstel NIE."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Welkom by die 'Printer Setup Wizard'\n"
-"\n"
-"\n"
-"Hierdie wysgeer sal u help op u drukker(s), wat aan u rekenaar gekoppel is, "
-"op te stel, \n"
-"Maak tog seker die drukker(s) is reg gekoppel en aangeskakel, sodat "
-"outospeur sy werk reg kan doen. \n"
-"Klik op \"Volgende\" sodra u gereed is, of op \"Kanselleer\" indien u nou "
-"enige drukkers wil opstel nie."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Welkom by die \"Printer Setup Wizard\"\n"
-"\n"
-"Hierdie wysgeer sal u help op u drukker(s) op te stel, hetsy hulle direk aan "
-"die rekenaar ,direk aan die netwerk, of aan 'n eksterne Windows rekenaar\n"
-"gekoppel is.\n"
-"\n"
-"Maak tog seker die drukker(s) is reg gekoppel en aangeskakel, sodat "
-"outospeur sy werk reg kan doen. Maak ook seker u netwerkdrukker(s) en "
-"Windows drukker bedieners aangeskakel en gekonnekteer is.\n"
-"\n"
-"Let ook tog dat autospeur van drukkers oor die netwerk langer neem as die "
-"outospeur van plaaslike drukkers. U kan gerus die outospeur van netwerk en/"
-"of Windows drukker bedieners versper indien u dit nie gaan gebruik nie.\n"
-"\n"
-"Klik op \"Volgende\" sodra u gereed is, of op \"Kanselleer\" indien u nou "
-"enige drukkers wil opstel nie."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Welkom by die 'Printer Setup Wizard'\n"
-"\n"
-"\n"
-"Hierdie wysgeer sal u help op u drukker(s), wat aan u rekenaar gekoppel is, "
-"op te stel, \n"
-"Maak tog seker die drukker(s) is reg gekoppel en aangeskakel, sodat "
-"outospeur sy werk reg kan doen. \n"
-"Klik op \"Volgende\" sodra u gereed is, of op \"Kanselleer\" indien u nou "
-"enige drukkers wil opstel nie."
-
-#
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Outospeur vir plaaslike drukkers"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Outospeur drukkers wat direk aan die LAN verbind is"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Outospeur drukkers wat aan Microsoft Windows rekenaars gekoppel is"
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "Gebruik outospeuring"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Geluk, u drukker is nou geïnstalleer en gekonfigureer!\n"
-"\n"
-"U kan druk deur die \"Print\"-opdrag van u program (gewoonlik in die \"File"
-"\"-kieslys)te gebruik.\n"
-"\n"
-"Indien u 'n drukker wil byvoeg, sy naam , of die opsies wil verander, kies "
-"\"Drukker\" in die \"Hardeware\" gedeelte van die '%s Control Center'."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, fuzzy, c-format
-msgid "Could not install the %s packages!"
-msgstr "Installeer pakket %s"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Outobespeuring van drukkers"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Toestel word afgetas..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", netwerkdrukker \"%s\", poort %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", drukker  \"%s\" op SMB/Windows bediener \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "%s bespeur"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Drukker op parallele poort #%s"
-
-#
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netwerkdrukker \"%s\", poort %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Drukker \"%s\" op SMB/Windows-bediener \"%s\""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Plaaslike Drukker"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Geen plaaslike drukkers bespeur.Om self een te spesifiseer, voorsien 'n "
-"toestelnaam/lêernaam (Parallelle poorte: /dev/lp0,/dev/lp1,..., gelyk aan "
-"LPT1:,LPT2:,...,1e USB-drukker: /dev/usb/lp0, 2de USB- drukker: /dev/usb/"
-"lp1,...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "U moet 'n toestel- of lêernaam voorsien!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Geen drukker gevind nie"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Plaaslike Drukkers"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Beskikbare drukkers"
-
-#
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Die volgende drukker is outomaties opgespoor. "
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Indien u nie hierde een wil konfigureer nie, voorsien dan 'n toestel-/"
-"lêernaam aan die toevoerlyn."
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Alternatiewelik, kan u 'n toestelnaam/lêernaam voorsien op die toevoerlyn"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Hier is 'n lys van aouto-opgespoorde drukkers. "
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Kies asseblief die drukker wat u wil opstel of voorsien 'n toestel-/lêer-"
-"naam "
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Kies asseblief die drukker wat drukwerk moet ontvang of voorsien 'n "
-"toestelnaam / lêernaam."
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Die opstel van u drukker is ten volle outomaties. Indien u drukker nie "
-"korrek bespeur is nie, of u moonlik 'n pasmaak konfigurasie verkies, gebruik "
-"\"Selfdoen konfigurasie\"."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Huidiglik is daar geen alternatiwe moontlikheid beskikbaar nie"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Kies asseblief die drukker om op te stel.Die opstel van u drukker is ten "
-"volle outomaties. Indien u drukker  nie korrek bespeur is nie of u moonlik "
-"'n pasmaak konfigurasie verkies, gebruik \"Selfdoen konfigurasie\""
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Kies asseblief die drukker na wie die drukwerk gestuur moet word."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Kies asseblief die poort waaraan u drukker gekoppel is of voorsien 'n "
-"toestelnaam / lêernaam."
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Kies asseblief die poort waaraan u drukker gekoppel is."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallele Poorte: /dev/lp0, /dev/lp1, ..., gelykstaande aan LPT1:, "
-"LPT2:, ..., 1ste USB-drukker: /dev/usb/lp0, 2de USB-drukker: /dev/usb/"
-"lp1, ...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "U moet 'n drukker / toestel spesifiseer!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, fuzzy, c-format
-msgid "Aborting"
-msgstr "Staak"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Eksterne lpd drukkeropsies"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Om 'n eksterne lpd drukker te gebruik, moet die naam van die "
-"drukkkerbediener en die naam van die drukkertou voorsien word."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Eksterne bedienernaam"
-
-#
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Eksterne drukkernaam"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Eksterne bedienernaam ontbreek!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Eksterne drukkernaam ontbreek!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Inligting"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Opgespoorde model: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Deursoek die netwerk..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", drukker \"%s\" op bediener \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Drukker \"%s\" op bediener \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) drukkeropsies"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Indien u drukwerk na 'n SMB drukker wil stuur, voorsien asseblief die "
-"volgende: SMB-rekenaarnaam ( Let dat dit mag verskil van die TCP/IP-"
-"rekenaarnaam) en moontlik die IP-adres van die bediener, die deelnaam van "
-"die drukker, toepaslike gebruikernaam, wagwoord, en werkgroep."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Indien die verlangde drukker gespeur is, kies dit eenvoudig uit die lys en "
-"voorsien die gebruikernaam, wagwoord, en/of werkgroep indien benodig."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "SMB-bedienernaam"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB-bediener se IP:"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Naam van deelarea"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Werkgroep:"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Outomaties Opgespoor"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Óf die bedienernaam óf die bediener-IP moet verskaf word!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "SAMBA-deelnaam ontbreek!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SEKURITEITS WAARSKUWING!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"U is besig om drukwerk na 'n Windows-gebruiker met 'n wagwoord op te stel. "
-"Daar is fout in Samba se argitektuur sodat hierdie wagwoord in sigbare teks "
-"op die instruksielyn geplaas word. Dit gebeur wanneer die Samba-kliënt "
-"drukwerk na die Windows-bediener stuur. Enige gebruiker kan dan daardie "
-"wagwoord sien, deur bv \"ps auxwww\" in te tik.\n"
-"\n"
-"Ons beveel een van die volgende alternatiewe aan ( bo en behalve dat u seker "
-"maak dat slegs masjiene op u plaaslike netwerk toegang na u Windows-bediener "
-"het, deur bv 'n vuurmuur op te stel):\n"
-"\n"
-"Gebruik 'n rekening sonder wagwoord op u Windows-bediener vir drukwerk daar "
-"is die \"GUEST\" of stel 'n aparte een op net vir drukwerk. Behou dan steeds "
-"wagwoord beskerming vir die ander.\n"
-"\n"
-"Sel die Windows-bediener so op, dat dit die drukker beskikbaar stel onder "
-"die LPD-protokol. Stel dan drukwerk op hierdie masjien op deur die \"%s\"-"
-"konneksie in Printerdrake te gebruik.\n"
-"\n"
-"Wie is Bernoldus Niemand?\n"
-"\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Stel u Windows bediener so op dat dit die drukker beskikbaar stel onder die "
-"IPP-protokol en stel drukwerk vanaf die masjien op met die \"%s\" konneksie-"
-"tipe in Printerdrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Konnekteer u drukker aan 'n Linux bediener, en laat u Windows-rekenaars ook "
-"daardie bediener gebruik.\n"
-"\n"
-"Sal ons voortgaan?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare drukkeropsies"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Om na 'n Netware drukker te druk, moet u die volgende voorsien: Netware "
-"rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam nie), "
-"asook die drukker se 'print queue' naam,en toepaslike gebruikernaam en "
-"wagwoord."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Drukkerbediener"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Drukkertou-naam"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP-bedienernaam ontbreek!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP-tounaam ontbreek!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", rekenaarnaam \"%s\", poort %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Rekenaar \"%s\", poort %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Sokdrukker-opsies"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Kien een van die drukkers uit die lys, wat ge-outospeur is, of voorsien die "
-"rekenaarnaam of IP en die opsionele poort (verstek is 9100) in die toevoer-"
-"velde."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van diedrukker "
-"voorsien en dalk ook 'n poortnommer voorsien.Met HP JetDirect-bedieners is "
-"die poortnommer gewoonlik 9100,maar dit mag anders wees met ander bedieners. "
-"Raadpleeg die handleidingwat saam met die hardeware gekom het."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Drukkerbedienernaam of IP ontbreek!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Drukkernaam of IP"
-
-#: printer/printerdrake.pm:2012
-#, fuzzy, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Drukkerdata word verfris..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "Drukkertoestel se URI"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
-"CUPS- of Foomatic-formaat wees. Nie alle URI-tipes word deur die "
-"spoelprogramme ondersteun nie."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "Pyp drukstuk na program"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Hier kan u enige instruksie spesifiseer waarna die drukwerk gepyp moet word "
-"instede van dit direk na die drukker te stuur."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Instruksielyn"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "'n Opdrag moet voorsien word!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr ""
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Is u drukker 'n multi-funksionele toestel van HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), 'n HP PhotoSmart of 'n HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Installeer %s pakket..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Bekyk die toestel en konfigureer %s ..."
-
-#: printer/printerdrake.pm:2277
-#, fuzzy, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Na watter sektor wil u skuif?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Installeer SANE pakkette..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Installeer 'mtools'-pakette ..."
-
-#: printer/printerdrake.pm:2467
-#, fuzzy, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "Foto-geheuekaart toegang op u HP multi-funksionele toestel"
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Deursoek u HP multi-funksionele toestel"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Foto-geheuekaart toegang op u HP multi-funksionele toestel"
-
-#: printer/printerdrake.pm:2509
-#, fuzzy, c-format
-msgid "Configuring device..."
-msgstr "Konfigurasie in aabou..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Stel drukkerpoort tot CUPS se beskikking..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Drukkerdata word gelees..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Voorsien Drukkernaam en Opmerkings"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Die drukkernaam mag slegs letters, syfers en die onderstreep-karakter bevat."
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Drukker \"%s\" bestaan alreeds,\n"
-"Wil u werklik die konfigurasie oorskryf?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Elke drukker benodig  naam (bv. lp). Die Beskrywing- en Liggingvelde is "
-"opsioneel. Hulle dien as inligting vir gebruikers."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Drukkernaam"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Beskrywing"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Ligging"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Drukkerdatabasis word voorberei..."
-
-#
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "U model drukker"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake het die model wat dit deur outospeur bekom het vergelyk met die "
-"modelle in die drukker-databasis. Daarna is die beste eweknie gesoek. Die "
-"resultaat-drukker mag verkeerd wees, veral indien u drukker nie in die "
-"drukker-databasis gelys word nie. Maak dus seker dat die model korrek is en "
-"klik op \"Die model is korrek\", andersins moet u op \"Kies model self\" "
-"klik, om self u drukker te kan kies.\n"
-"\n"
-"Die model drukker wat 'Printerdrake' gevind het:\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Die model is korrek"
-
-#
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Kies model self"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Maak tog seker dat 'Printerdrake' u drukker korrek bespeur het. Sou dit "
-"verkeerdelik bespeur was, of \"Onverwerkte (direkte) drukker\" verlig is, "
-"kies dan die korrekte een vanuit die lys."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "Installeer 'n PPD-lêer van 'n vervaardiger."
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-"Elke PostScript-drukker word gelewer met 'n PPD-lêer wat die drukker se "
-"opsies en dinge beskryf."
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"Hierdie lêer is gewoonlik iewers op die CD, saam met die Windows en Mac-"
-"drywers vir die drukker."
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr "U behoort die PPD-lêers ook op die vervaardiger se webwerf vind."
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"Sou u Windows ook op die masjie geïnstalleer het, kan u ook daar loer vir "
-"die lêer."
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-"Deur die drukker se PPD-lêer te installeer wanneer u die drukker opstel, sal "
-"dit al die opsies van die drukker se hardeware beskikbaar stel."
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"Hier kan u die PPD-lêer kies om te installeer op die rekenaar. Dit sal dan "
-"gebruik word tydens die opstelling van die drukker."
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "Installeer PPD-lêer vanaf"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "Disket"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "Ander plek"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "Kies PPD-lêer"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "Die PPD-lêer %s bestaan nie, of dis onleesbaar!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "Die PPD-lêer %s is nie volgens die standaarde nie!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "Installeer PPD-lêer..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI windrukker-konfigurasie"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"U stel nou 'n OKI laser-windrukker op. Hierdie drukkers\n"
-"gebruik 'n baie spesiale protokol vir kommunikasie en kan slegs korrek werk "
-"indien hulle aan die eerste parallelle poort gekoppel word. Sou u drukker "
-"tans elders gekoppel wees, skuif dit na die eerste parallele poort voordat u "
-"'n toetsbladsy druk. Dit is baie belangrik, anders sal die drukker nie reg "
-"werk nie, en die drywer sal u tipe konneksie ignoreer."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfigurasie"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark se inkspuitdrukkers ondersteun slegs plaaslike drukkers, geen "
-"drukkers op eksterne rekenaars of drukkerbediener-boksies. Konnekteer "
-"asseblief die drukker plaaslik en konfigureer dit op daardie (plaaslike) "
-"masjien."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Lexmark X125 konfigurasie"
-
-#: printer/printerdrake.pm:3246
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Lexmark se inkspuitdrukkers ondersteun slegs plaaslike drukkers, geen "
-"drukkers op eksterne rekenaars of drukkerbediener-boksies. Konnekteer "
-"asseblief die drukker plaaslik en konfigureer dit op daardie (plaaslike) "
-"masjien."
-
-#: printer/printerdrake.pm:3268
-#, fuzzy, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Klankkonfigurasie"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Lexmark se inkspuitdrukkers ondersteun slegs plaaslike drukkers, geen "
-"drukkers op eksterne rekenaars of drukkerbediener-boksies. Konnekteer "
-"asseblief die drukker plaaslik en konfigureer dit op daardie (plaaslike) "
-"masjien."
-
-#: printer/printerdrake.pm:3295
-#, fuzzy, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Selfdoen TCP/IP-konfigurasie"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Laai Fermware (Firmware) Op vir HP LaserJet 1000"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Verstek verstellings van drukker\n"
-"\n"
-"Maak seker die volgende is korrek opgestel: 1.) bladsy grootte; 2.) ink tipe/"
-"drukmodus; 3.)hardeware verstellings van laserdrukkers (geheue, dupleks of "
-"nie, ekstra laaie). Let tog dat baie hoë kwaliteit/resolusie die spoed "
-"waarteen gedruk word aansienlik verminder."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Verstek verstellings van drukker"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsie %s moet 'n nommer wees!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opsie %s is buite bereik!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Toetsbladsye"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Kies asseblief watter toetsbladsye u wil druk.\n"
-"Aandag: die foto-toetsbladsy kan 'n tydjie duur om uit te druk, op "
-"laserdrukkers met te min geheue, mag dit moontlik nie eens werk nie. Dit is "
-"gewoonlik net nodig vir 'n normale toetsbladsy."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Geen toetsbladsye"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Druk"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Standaard toetsbladsy"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternatiewe toetsbladsy (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Fototoetsbladsy"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Geen toetsbladsy(e)"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Toetsbladsy(e) word gedruk..."
-
-#: printer/printerdrake.pm:3743
-#, fuzzy, c-format
-msgid "Skipping photo test page."
-msgstr "Fototoetsbladsy"
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-"Drukstatus:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukker gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Het dit reg gewerk?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Onverwerkte (direkte) drukker"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Sou u 'n lêer van die instruksielyn wil druk kan u of die instruksie \"%s "
-"<lêer>\" gebruik, of die grafiese program:\"xpp <lêer>\" of \"kprinter <lêer>"
-"\". Die grafiese programme vergemaklik die kies en verstel van 'n spesifieke "
-"drukker.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Hierdie opdragte kan u ook in die \"Printing command\" veld in die drukker-"
-"dialoogvensters van baie programme gebruik, maar nou hoef u nie die lêernaam "
-"te voorsien nie , die program doen dit vir jou.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Die \"%s\"-opdrag laat u toe om opsies vir 'n sekere drukstuk te verander. "
-"Sit net doodeenvoudig die ekstra opsies by die opdragbyvoorbeeld \"%s <lêer>"
-"\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Om meer uit te vind oor die beskikbare opsies vir die huidige drukker, lees "
-"die onderstaande lys of klik op die \"Drukkeropsies\" knoppie.%s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hier is 'n lys beskikbare drukkeropsies vir die huidige drukker:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Om 'n lêer uit te druk vanaf die instruksielyn, gebruik die opdrag \"%s "
-"<lêernaam>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Hierdie opdragte kan u ook in die \"Printing command\" veld in die drukker-"
-"dialoogvensters van baie programme gebruik, maar nou hoef u nie die lêernaam "
-"te voorsien nie , die program doen dit vir jou.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Klik op die \"Drukkeropsies\" knoppie, om 'n lys beskikbare opsies vir die "
-"huidige drukker te verkry."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Om 'n lêer uit te druk vanaf die instruksielyn, gebruik die opdrag \"%s "
-"<lêernaam>\" of \"%s <lêernaam>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Om opsies te kies en druktake te bestuur, kan u ook die grafiese program "
-"\"xpdq\" gebruik \n"
-"Indien u KDE as werksomgewing gebruik, kan u 'n \"paniek knoppie\" opstel, "
-"dit is 'n ikoon op u werkskerm wat lui \"STOP Drukker\", wat dan dadelik "
-"alle druktake sal stop, sodra u op dit klik. Dit is byvoorbeeld handig as "
-"die papier vasdruk.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" en \"%s\" laat u ook toe om die opsies vir 'n spesifieke drukwerk te "
-"verander. Voeg net eenvoudig die verstellings wat u verlang by die opdrag "
-"bv. \"%s <lêer>\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Drukwerk/Skandering/Foto-kaarte op \"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Drukwerk/Skandeering op \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Drukwerk/Fotokaart Toegang op \"%s\""
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Drukwerk vir drukker \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drukwerk vir drukker \"%s\""
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Drukkeropsies"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, fuzzy, c-format
-msgid " - Print head alignment\n"
-msgstr "Bestuur Drukkers \n"
-
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "Kleurkonfigurasie"
-
-#: printer/printerdrake.pm:3959
-#, fuzzy, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"U multi-funksionele toestel is outomaties opgestel dat dit kan skandeer. "
-"Gebruik \"scanimage\" indien u wil skandeer (\"scanimage -d hp:%s\" om die "
-"skandeerder te spesifiseer, sou daar meer as een wees). Grafiese programme "
-"\"xscanimage\" en \"xsane\" is ook beskikbaar. Met GIMP kan u onder \"File\"/"
-"\"Acquire\"-kieslys soek. Vir meer inligting tik \"man scanimage\" op die "
-"instruksielyn.\n"
-"\n"
-"Moet NIE \"scannerdrake\" vir hierdie toestel gebruik NIE! "
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"U drukker is so opgestel dat dit toegang aan die fotokaart-toestelle op u "
-"rekenaar verleen. U kan u fotokaarte gebruik deur die grafiese \"MtoolsFM\" "
-"program. (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager"
-"\"). U kan ook vanaf die instruksielyn \"mtools\" intik. (sien \"man mtools"
-"\"). U sal die kaart se lêerstelsel onder die letter \"p:\" vind. Indien u "
-"meer as een HP-drukker, met fotokaarte het sal hulle daarop volg. In "
-"\"MtoolsFM\" kan u tussen letters skakel in die regter-boonste hoek."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Dra drukkerkonfigurasie oor"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"U kan die drukker se konfigurasie wat u vir spoel %s gedoen het, dupliseer "
-"na %s, u huidige spoeller. Al die konfigurasie (drukkernaam, beskrywing, "
-"ligging, konneksie-tipe en verstek opsies) sal oorgeplaas word, drukwerk sal "
-"nie oorgeplaas word nie.\n"
-"Nie alle druk-rye kan so oorgeplaas word nie a.g.v. die volgende redes:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ondersteun nie Novell-bedieners se drukkers nie, ook nie die stuur van "
-"data in 'n 'free-formed command' styl nie.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ondersteun slegs plaaslike drukkers, eksterne drukkers, en Sok/TCP "
-"drukkers.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"En boonop, druker-rye kan nie oorgedra word nie, indien hulle nie deur "
-"hierdie program of \"foomatic-configure\" geskep is nie."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Let tog dat drukkers wat opgestel is met hulle vervaardiger se PPD lêers of "
-"plaaslike CUPS drywers, nie oorgeplaas kan word nie."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Kies die drukkers wat u wil oordra en klik op\n"
-"\"Oordra\""
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Moet nie drukkers oordra nie"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Oordra"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"A drukker met die naam \"%s\" bestaan reeds onder %s.\n"
-"Klik op \"Oordra\" om dit te oorskryf.\n"
-"U kan ook 'n nuwe naam intik of hierdie drukker oorslaan."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Nuwe drukkernaam"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "%s word oorgedra..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"U het die vorige verstek-drukker (\"%s\") oorgeplaas, moet dit ook die "
-"verstek-drukker wees onder die nuwe drukkerstelsel %s?"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Drukkerdata word verfris..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Konneksie word begin..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Stel nou die netwerk op"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Netwerk nie gekonfigureer nie"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"U gaan 'n eksterne drukker opstel. Dit benodig netwerktoegang, maar u "
-"netwerk is nog nie opgestel nie. Indien u so voortgaan, sal u nie hierdie "
-"drukker kan gebruik nie. Hoe moet ons te werk gaan?"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Gaan voort sonder om die netwerk te konfigureer"
-
-#: printer/printerdrake.pm:4195
-#, fuzzy, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"Die netwerk, soos opgestel gedurende die installasie, kom nie aan die gang "
-"nie. Maak tog seker die netwerk is tot u beskikking, en gaan u konfigurasie "
-"na deur die 'Mandriva Linux Control Center' te gebruik. "
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Die netwerk was ontoeganklik. Ondersoek asseblief u konfigurasie en "
-"hardeware. Probeer daarna weer om u eksterne drukker te konfigureer."
-
-#
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Drukkerstelsel word herbegin..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "hoog"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "paranoïes"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installeer 'n drukkerstelsel in die %s sekuriteitsvlak"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"U gaan nou die %s drukkerstelsel installeer op 'n rekenaar wat in die %s "
-"sekuriteitsvlak is.\n"
-"\n"
-"Die drukkerstelsel loop 'n daemoon (agtergrond proses) wat wag vir drukwerk "
-"en dit dan doen. Hierdie daemoon kan bereik word deur ander rekenaars op die "
-"netwerk, so dit kan 'n swakpunt in die sekuriteit van u rekenaar wees. Die "
-"reel is dat hoe minder van hierdie daemone loop, hoe meer veilig is u "
-"rekenaar , maar u moet dit ook kan gebruik!\n"
-"\n"
-"Wil u drukkers opstel op hierdie rekenaar?"
-
-#
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Begin die drukkerstelsel tydens selflaai"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Die drukkerstelsel (%s) sal nie automaties, tydens selflaai, saam met die "
-"ander dienste begin nie.\n"
-"\n"
-"Dit is moontlik versper deur die verandering na 'n hoër sekuriteitsvlak."
-"(sien \"man msec\" vanaf die instruksielyn)\n"
-"\n"
-"Wil u graag dat die drukkerstelsel WEER saam met die ander dienste tydens "
-"selflaai begin?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "Geïnstalleerde sagteware word deursoek..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Verwyder %s ..."
-
-#: printer/printerdrake.pm:4310
-#, fuzzy, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Verander die drukkerstelsel"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "Installeer %s ..."
-
-#: printer/printerdrake.pm:4334
-#, fuzzy, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Verander die drukkerstelsel"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#
-#: printer/printerdrake.pm:4418
-#, fuzzy, c-format
-msgid "Name or IP of remote server:"
-msgstr "Eksterne LPD-drukker"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Stel Verstekdrukker op ...."
-
-#
-#: printer/printerdrake.pm:4458
-#, fuzzy, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Eksterne CUPS-drukker"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, fuzzy, c-format
-msgid "Local CUPS printing system"
-msgstr "Konfigureer die CUPS-drukkerstelsel"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Kies drukkerspoelprogram"
-
-#
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Probleme met die konfigurasie van drukker \" %s\"!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Installeer Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, fuzzy, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "Kon nie die pakkete installeer om u skandeerder(s) te deel nie."
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Die volgende drukkers is opgestel. Klik-klik op 'n drukker om sy "
-"verstellings te verander, dit die verstek drukker te maak, of inligting "
-"omtrent dit te sien."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Vertoon alle beskikbare eksterne CUPS-drukkers"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Verfris die drukkerlys (vertoon alle beskikbare eksterne CUPS-drukkers)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS-konfigurasie"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Verander die drukkerstelsel"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Normale modus"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Kundige bedryfsvlak"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Drukkeropsies"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drukker %s%s\n"
-"Wat wil u aan hierdie drukker verander?"
-
-#: printer/printerdrake.pm:5165
-#, fuzzy, c-format
-msgid "This printer is disabled"
-msgstr "Hierdie partisie se grootte kan nie verstel word nie"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Gaan voort!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Drukkerkonneksie-tipe"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Drukkernaam, beskrywing, ligging"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Drukkervervaardiger, model, drywer"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Drukkervervaardiger, model"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Maak hierdie die verstekdrukker"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, fuzzy, c-format
-msgid "Enable Printer"
-msgstr "Ontsper Bediener"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, fuzzy, c-format
-msgid "Disable Printer"
-msgstr "Versper Bediener"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Druk toetsbladsy(e)"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Leer hoe om hierdie drukker te gebruik"
-
-#
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Verwyder drukker"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Verwyder ou drukker \"%s\" ...."
-
-#: printer/printerdrake.pm:5272
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Drukker \"%s\" op bediener \"%s\""
-
-#: printer/printerdrake.pm:5277
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Die VPN-konneksie is nou gedeaktiveer."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Wil u werklik drukker  \"%s\" verwyder?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Verwyder drukker \"%s\"..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Verstek drukker"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Drukker \"%s\" is nou die verstekdrukker"
-
-#: raid.pm:42
-#, fuzzy, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "Kon nie gids /usr/share/sane/firmware skep nie!"
-
-#: scanner.pm:107
-#, fuzzy, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "Kon nie gids /usr/share/sane/firmware skep nie!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr "Kon nie firmware-lêer %s na /usr/share/sane/firmware kopieer nie!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "Kon nie die permisies van die firmware-lêer %s stel nie."
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr "Kon nie die pakkete installeer om u skandeerder(s) te deel nie."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr "U skandeerder(s) sal NIE vir normale gebruikers beskikbaar wees NIE. "
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "Aanvaar/Weier snert IPv4-foutboodskappe."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr "Aanvaar/Weier uitgesaaide icmp-ego's"
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr "Aanvaar/Weier icmp-ego's."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Laat toe/Verbied outo-inteken."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "Laat toe/Verbied herbegin deur 'n konsole-gebruiker."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Laat toe/Verbied 'root' deur die netwerk in te teken."
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Laat toe/Weier vir 'root' om direk in te teken."
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Laat toe/Verbied die vertoon van gebruikername op vertoonbestuurders\n"
-" (display managers, bv. kdm en gdm)."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"Laat toe/Verbied X-konneksies:\n"
-"\n"
-"- ALMAL ( alle konneksies word toegelaat),\n"
-"\n"
-"- PLAASLIK (slegs vanaf die plaaslike rekenaar),\n"
-"\n"
-"- GEEN (geen konneksie)."
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"Hierdie argument spesifiseer indien kliënte gemagtig is om aan die\n"
-"X-bediener te koppel via die netwerk (tcp poort 6000) of nie."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"Versper/Ontsper 'crantab' en 'at' vir gebruikers.\n"
-"\n"
-"Plaas toegelete gebruikers in /etc/cron.allow en /etc/at.allow\n"
-"(verwys na man at(1) en crontab(1))."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr "Ontsper/Versper 'syslog' verslae na konsole 12"
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"Versper/Ontsper flous-naamresolusie-beskerming. Indien\n"
-" \"%s\" gekies is, sal dit aangeteken word\n"
-" in die staaflêers."
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Sekuriteits-waarskuwings:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "Ontsper/Versper \"IP spoofing\" beskerming."
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "Versper/Ontsper 'libsafe' indien 'libsafe' teenwoordig is."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "Versper/Ontsper aanteken van vreemde IPv4-pakkies in staaflêer."
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Versper/Ontsper msec se uurlikse toets."
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"'su'-funksie slegs vir lede van die \"wheel\"-groep of vir enige gebruiker."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "Geldigverklaring deur wagwoorde"
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr "Aktiveer/Versper ethernetkaarte 'promoscuity' toets."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr "Aktiveer/Versper daaglikese sekuriteits-toets."
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr "Versper/Ontsper sulogin(8) in enkel-gebruiker modus"
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr "Voeg die naam by as 'n uitsondering tot wagwoordveroudering deur msec."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-"Verstel wagwoord-veroudering no \"max\" dae en versuim om\n"
-"te verander na \"inactive\"."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr "Stel die wagwoord-geskiedenis se lente om hergebruik te voorkom"
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Stel die wagwoord se minimum lengte, minimum aantal syfers en die minimum "
-"hoofletters."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Kies 'root' se 'umask'."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "indien ja gekies is, ondersoek die oop poorte."
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"indien ja gekies is, toets vir:\n"
-"\n"
-"-leë wagwoorde,\n"
-"\n"
-"-geen wagwoord in /etc/shadow\n"
-"\n"
-"-vir gebuikers buiten 'root' wie se UID '0' is."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"indien ja gekies is, ondersoek lêer-vergunningsvlakke in gebuiker se tuisgids"
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"indien ja gekies is, kyk of netwerk-toestelle in 'promiscuous'-modus is."
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "indien ja gekies is, loop daaglikse sekuriteitstoetse."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "indien ja gekies is, ondersoek byvoeg/verwydering van sgid-lêers."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "indien ja gekies is, kyk vir leë wagwoorde in '/etc/shadow'"
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-"indien ja gekies is, ondersoek die toetssom (checksum) van suid/sgid lêers"
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "indien ja gekies is, let na byvoeg/verwydering van 'suid root' lêers."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "indie ja gekies is, verklik lêers sonder eienaars."
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"indien ja gekies is, soek vir lêers/lêergidse waarna enige iemand kan skryf."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "indien ja gekies is, doen 'chkrootkit'-toetse."
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"Indien gespesifiseer, stuur die e-pos verslag na hierdie adres, so nie,\n"
-"stuur na 'root'"
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "indien ja gekies is, stuur toetsreslutate via e-pos."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "Moet nie e-pos stuur indien daar niks is om oor te waarsku nie"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "indien ja gekies is, doen 'n paar toetse teen die rpm-databasis."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "indien ja gekies is, skryf deursoek-resultate na staaflêer."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "indien ja gekies is, skryf toetsresultate na tty."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr "Stel instruksiedop se geskiedenisgrootte. '-1' beteken oneindig groot."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "Voorsien die tydsbeperking van die dop. Indien geen, maak dit Zero"
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "Uittel se eenheid is in sekondes"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Stel die 'umask'"
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Aanvaar snert IPv4 foutboodskappe"
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Aanvaar uitgesaaide icmp-ego's"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "Aanvaar icmp-ego's"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* bestaan reeds"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "Herbegin deur die konsole se gebruiker"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Laat eksterne 'root'-inteken toe"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "Direkte 'root' inteken"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr "Wys gebruikers op vertoonbestuurders (kdm en gdm)"
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "Laat X Window konneksies toe"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "Magtig TCP konneksies na 'X Window'"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "Magtig al die dienste wat tcp_wrappers beheer"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "'Chkconfig' volg 'msec' se reëls"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "Aktiveer \"crontab en \"at\" vir gebruikers"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "'syslog' verslae na konsole 12"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "Flous-naamresolusie-beskerming"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "Ontsper flous-naamresolusie-beskerming"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "Ontsper 'libsafe' indien 'libsafe' teenwoordig is."
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "Ontsper aanteken van vreemde IPv4-pakkies in staaflêer."
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "Aktiveer msec se uurlikse ondersoek"
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-"Aktiveer 'su' slegs vir die 'wheel'-groep se lede OF vir enige gebruiker"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "Geldigverklaring deur wagwoorde"
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "Ethernetkaarte 'promoscuity' toets"
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "Daaglikse sekuriteits-toets"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "'Sulogin(8)' in enkel-gebruikervlak"
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Geen wagwoordveroudering vir"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-"Spesifseer intervalle van wagwoord-verval en de-aktivering van rekeninge"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Lengte van wagwoord-geskiedenis"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "Wagwoord se minimum lente en die aantal syfers en hoofletters"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "'root' se umask"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Instruksiedop se geskiendenis-gootte"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Tydsbeperking vir dop"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "Gebruiker se 'umask'"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Toets oop poorte"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "Toets vir nie-veilige rekeninge"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "Ondersoek lêer-verunningsvlakke in gebruiker se tuisgids"
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "kyk of netwerk-toestelle in 'promiscuous'-modus is"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Loop die daaglikse sekuriteits-toetse"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "Ondersoek die byvoeg/verwydering van sgid-lêers"
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "Kyk vir leë wagwoorde in '/etc/shadow'"
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "Ondersoek die toetssom (checksum) van suid/sgid lêers"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "Ondersoek die byvoeg/verwydering van suid 'root'-lêers"
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "Raporteer eienaarlose-lêers"
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Soek vir lêers/lêergidse waarna enige iemand kan skryf."
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "Loop 'chkrootkit' toetste"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "Moet nie onnodige e-pos stuur nie"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"Indien gespesifiseer, stuur die e-pos verslag na hierdie adres, so nie,\n"
-"stuur na 'root'"
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "Stuur toets-reslutate via e-pos"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "Doen 'n paar toetse teen die rpm-databasis"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Skryf toetsreslutate na 'n staaflêer"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Stuur toets-resultate na tty"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Krakers Welkom"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Lig"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Hoog"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Hoër"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoïes"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
-"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
-"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen\n"
-"wagwoord toegang nie."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Wagwoorde is nou ontsper, maar die gebruik as 'n netwerk-rekenaar word nie "
-"aanbeveel nie."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
-"wat aan die internet as 'n kliënt konnekteer."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr "Daar is reeds beperkings, en outomatise toetse word snags gedoen."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Met hierdie sekuriteitsvlak kan u stelsel as 'n bediener gebruik word.\n"
-"Die sekuriteit is goed genoeg sodat die rekenaar konneksies van kliënte\n"
-"af kan aanvaar.\n"
-"Aandag: Indien u masjien bloot 'n  kliënt op die Internet is, kan u 'n laer\n"
-"vlak kies."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Hierdie is soortgelyk aan die vorige vlak, maar die stelsel is totaal "
-"geslote en sekuriteit is op sy maksimum."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec Basiese Opsies"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Kies die verlangde sekuriteitsvlak"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Sekuriteitsvlak"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Gebruik libsafe vir bedieners"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"'n Programmateek wat beskerm teen buffer-vloede en formaat-string aanvalle."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sekuriteits-administrateur (gebruiker of e-pos)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron is skeduleerder vir periodiese instruksies."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Die apmd monitor die sterkte van u battery en skryf terugvoer na u\n"
-"staaflêers.\n"
-"Dit kan ook ingespan word om die rekenaar af te skakeel, sodra die battery\n"
-"pap word."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at'\n"
-"gespesifiseer.\n"
-"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
-"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele\n"
-" funksionaliteit\n"
-"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger\n"
-"konfigurasie."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"\"FAM\" is 'n montor daemon wat verslag lewer sodra lêers verander.\n"
-"Word deur GNOME en KDE gebruik"
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM verleen muisvermoëns aan teksgebaseerde Linuxapplikasies soos\n"
-"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
-"konsole toe asook opspringkieskaarte."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake tas die hardeware af, en konfigureer\n"
-"nuwe/veranderde hardeware."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is 'n WWW-bediener.\n"
-"Dit kan HTML-lêers uitstuur en CGI's hanteer"
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Die internet-superbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
-"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
-"vir\n"
-"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
-"waarvoor\n"
-"inetd verantwoordelik is."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Loods die filter van pakkies vir die 'Linux 2.2 kernel'-reeks, om 'n\n"
-"vuurmuur op te stel, wat u rekenaar beskerm teen aanvalle oor die netwerk."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Hierdie pakket laai die sleutelbordkaart soos dit in\n"
-"/etc/sysconfig/keyboard\n"
-"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram.\n"
-"U moet dit op meeste rekenaars ongesper laat."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Outospeuring en hardewarekonfigurasie met herlaaityd."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf sal soms verskillende take verrig tydens die selflaai,\n"
-"om so die stelsel se konfigurasie te onderhou."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
-"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"'Linux Virtual Server', word gebruik om 'n hoë werkverrigting\n"
-"en beskikbare bediener te verkry."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-"rekenaarname na IP-adresse toe om te skakel."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Heg en ontheg alle netwerklêerstels (NFS), SMB (Lan Manger/Windows)\n"
-"en NCP (Netware) hegpunte."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
-"herlaaityf te begin."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
-"die /etc/exports lêer opgestel."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS is 'n populêre protokol vir lêerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien die NFS-lêersluitfunksionaliteit."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Aktiveer outomaties die numslot-sleutel vir die aantekentolk en\n"
-"'Xorg' tydens selflaai."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
-"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
-"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
-"veilig om op rekenaars te hê wat dit nie nodig het nie."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
-"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
-"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix is 'n e-posoordragagent (MTA). Dit is die program wat e-pos\n"
-"van een bediener na 'n ander oordra."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Stoor en herstel die stelsel-entropie-poel vir hoë kwaliteit,\n"
-"lukraak-nommergenerasie."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Ken rou-toestelle aan blok-toestelle toe ( soos bv. hardeskyf\n"
-"partisies), vir programme soos Oracle en DVD-spelers"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Die 'routed' diensprogram hanteer outomatiese IP-roeteer-tabel-opdatering\n"
-"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
-"meer komplekse protokolle nodig vir komplekser netwerke."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
-"werksverrigting-inligting oor enige rekenaar op die\n"
-"netwerk te onttrek."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
-"aangeteken is op ander samewerkende rekenaars."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
-"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop.  (Amper soos "
-"'finger')."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Laai die klankstelsel op u rekenaar"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
-"te log na 'n verskeidenheid loglêers. Dit is altyd goed om syslog te loop."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Laai die drywers vir u USB-toestelle"
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "Laai die X-fontbediener (dis nodig vir Xorg)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Drukwerk"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Internet"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Lêerdeling"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Eksterne-administrasie"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Databasis-bediener"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "aktief"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "onaktief"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Dienste en deamone"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Jammer, geen ekstra inligting\n"
-"rakende hierdie diens nie."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "Begin sodra gevra word"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "met herlaai"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Begin"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Stop"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Wat is Mandriva Linux?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Welkom by <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, fuzzy, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"Mandriva Linux is 'n Oopbron bedryfstelsel wat duisende van die keurigste "
-"programme beskikbaar in die Oopbron wêreld bevat. Mandriva Linux is een van "
-"die gewildste in die wereld!"
-
-#: share/advertising/02.pl:13
-#, fuzzy, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Die KDE Keuse</b>"
-
-#: share/advertising/02.pl:15
-#, fuzzy, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Welkom by die wêreld van Oopbron sagteware!"
-
-#: share/advertising/02.pl:17
-#, fuzzy, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"Mandriva Linux is toegewyd aan die Oopbron manier van dinge doen. Hierdie "
-"vrystelling is die reslutaat van samewerking tussen Mandriva se span "
-"ontwikkelaars en 'n wereldwye gemeenskap wan mense wat bydraes lewer."
-
-#: share/advertising/02.pl:19
-#, fuzzy, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-"Ons wil graag almal bedank (in besonder die Suid-Afrikaners) wat so hard "
-"gewerk het om hierdie vrystelling moontlik te maak."
-
-#: share/advertising/03.pl:13
-#, fuzzy, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>Neem Kennis</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, fuzzy, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>Sluit aan by die Mandriva Linux gemeenskap!</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, fuzzy, c-format
-msgid "<b>Download Version</b>"
-msgstr "Hierdie is die Mandriva Linux <b>Download weergawe</b>."
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, fuzzy, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery is die maklikste en mees gebruikersvriendelike Linux. Dit sluit 'n "
-"hand-geselekteerde keuse van top sagteware vir gebruik op kantoor, vir "
-"multimedia en die Internet."
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, fuzzy, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-"PowerPack is Mandriva se uitblinker werkstasie-produk. Buiten dat dit die "
-"maklikste is om te ken gebruik, sluit dit duisende programme in van die mees "
-"gewildste tot die mees tegnieste."
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, fuzzy, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-"PowerPack+ is 'n volledige oplossing vir klein tot medium grootte netwerke. "
-"PowerPack+ verhoog die waarde van die standaard PowerPack deur 'n volledige "
-"keuse wereldklas bediener aplikasies in te sluit."
-
-#: share/advertising/09.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, fuzzy, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Mandriva Linux Updates Applet"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "Vind meer uit rakende <b>Personal Solutions</n>:"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>Die KDE Keuse</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, fuzzy, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Kies u grafiese werksomgewing!</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr ""
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, fuzzy, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Neem Kennis</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, fuzzy, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"En u het net 'n e-pos program verwag, nee, nee! <b>Kontact</b> sluit ook 'n "
-"adresboek, kalender en dagboek program in, o, en moet nie vergeet van die "
-"notaboekkie nie!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Rits op die Internet</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, fuzzy, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* Rits op die Internet met <b>Mozilla en Konqueror</b>"
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, fuzzy, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "Dra lêers deur FTP oor"
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, fuzzy, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* Redigeer Grafika en foto's met <b>The Gimp</b>"
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, fuzzy, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"Die kieslys in Mandriva Linux het gebruikersvriendelike programme vir alle "
-"behoefdes:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-"\t - Skep, redigeer en deel kantoor dokumentasie met <b>OpenOffice.org</b>"
-
-#: share/advertising/18.pl:17
-#, fuzzy, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* Kry beheer oor u persoonlike data met die geïntegreerde e-pos programme:"
-"<b>Kontak</b> en <b>Evolution</b>"
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr "\t* Rits op die Internet met <b>Mozilla</b> en <b>Konqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* Deel in die aanlyn kletzkamers met <b>Kopete</b>"
-
-#: share/advertising/18.pl:20
-#, fuzzy, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* Luister na musiek CDs asook Musiek-lêers met <b>KsCD</b> en <b>Totem</b>"
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* Redigeer Grafika en foto's met <b>The Gimp</b>"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Ontwikkelingomgewings</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>Ontwikkelings Programme</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: 'n buigbare en intyd vertoon-redigeerder"
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr "\t* <b>XEmacs</b>: oopbron redigeerder en ontwikkelings program."
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr "\t* <b>Vim</b>: gevorderde redigeerder met ekstras bo die standaard Vi"
-
-#: share/advertising/21.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>Ontwikkelings Programme</b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, fuzzy, c-format
-msgid "\t* Scripting languages:"
-msgstr "besig om te druk bestuurder"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, fuzzy, c-format
-msgid "\t* And many more."
-msgstr "\t* En nog meer"
-
-#: share/advertising/22.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>Ontwikkelings Programme</b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, fuzzy, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Bedieners</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, fuzzy, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* Stuur en ontvang van e-pos"
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Bedieners</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-"Bemagtig u besigheid se netwerk deur <b>premier server solutiuons</b> "
-"insluitend:"
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr "\t* <b>Samba</b>: Lêer- en drukker-bediener vir MS-Windows kliënte"
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: Die wydste gebruike Web-bediener"
-
-#: share/advertising/24.pl:20
-#, fuzzy, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr "\t* <b>MySQL</b>: Die wêreld se gewildste Oopbron databasis."
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: Concurrent Versions System, die dominante oopbron netwerk- "
-"deursigtigde weergawe-beheerstelsel."
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr "\t* <b>ProFTPD</b>: Die fyn verstelbare GPL FTP-bediener sagteware"
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Mandriva Linux Control Center</b>"
-
-#: share/advertising/25.pl:15
-#, fuzzy, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"Die \"Mandriva Linux Control Center\" is 'n versameling nutsprogramme wat "
-"die opstel van u rekenaar vergemaklik."
-
-#: share/advertising/25.pl:17
-#, fuzzy, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-"U sal voorwaar verlief raak op hierdie versameling programme wat alles "
-"insluit van die opstel van hardeware, hegpunte, die Netwerk en Internet, tot "
-"die verstel van die sekuriteitsvlakke en installasie van sagteware."
-
-#: share/advertising/26.pl:13
-#, fuzzy, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>Die KDE Keuse</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, fuzzy, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/advertising/27.pl:15
-#, fuzzy, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"Hier kan u alle Mandriva produkte en dienste vind. <b>Mandriva Store</b> --"
-"ons ten volle toegeruste e-handel platvorm."
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "Gaan draai sommer vandag by <b>store.mandriva.com</b>"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, fuzzy, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-"Hierdie is meer as net 'n gemeenskap, hier kry u ekstra waarde deur produkte "
-"en dienste wat die volgende insluit:"
-
-#: share/advertising/28.pl:20
-#, fuzzy, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr "\t* Spesiale afslag vir produkte en dienste by \"Mandriva Store\""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, fuzzy, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* Deel in die aanlyn kletzkamers met <b>Kopete</b>"
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Kantoorwerkstasie"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Kantoorprogramme: Woordverwerkers(OpenOffice.org Writer, Kword), spreistate "
-"(OpenOffice.org Calc, Kspread), PDF-sigprogramme, ens."
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kantoorprogramme: Woordverwerkers( kword, abiword), spreistate (kspread, "
-"gnumeric), PDF-sigprogramme, ens."
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Speletjiesrekenaar"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Vermaak: Arkade, Bordspel, Strategie ens."
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Multimediastasie"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Klank- en videospelers/redigeerders"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Internetstasie"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (mutt, tin) en om "
-"ook die web deur te blaai."
-
-#
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Netwerkrekenaar (kliënt)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Kliëntprogramme vir 'n verkeidenheid protokolle insluitend SSH"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Konfigurasie"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Nutsprogramme wat u rekenaarkonfigurasie vergemaklik"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Konsole Hulpprogramme"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-"Redigeerders. teksverwerkers, instruksiedoppe, lêer-nutsprogramme, terminaal-"
-"programme"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitlêers"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Dokumentasie"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Boeke en HOWTO's oor Linux en Vrye Sagteware"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Linux Standard Base. Derdeparty ondersteuning van programme"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, fuzzy, c-format
-msgid "Groupware"
-msgstr "Groep:"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Kolab-bediener"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Vuurmuur/Netwerkroteerder"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Internetpoort"
-
-#: share/compssUsers.pl:96
-#, fuzzy, c-format
-msgid "Mail/News"
-msgstr "/Lêer/_Nuut"
-
-#: share/compssUsers.pl:97
-#, fuzzy, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix e-pos-bediener"
-
-#: share/compssUsers.pl:100
-#, fuzzy, c-format
-msgid "Directory Server"
-msgstr "Herstel vanaf CD"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "FTP-bediener"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr ""
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Domeinnaam en Netwerk-informasie-bediener (DNS/NIS)"
-
-#: share/compssUsers.pl:112
-#, fuzzy, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Drukkerbediener"
-
-#: share/compssUsers.pl:113
-#, fuzzy, c-format
-msgid "NFS Server, Samba server"
-msgstr "Samba-bediener"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Databasis"
-
-#: share/compssUsers.pl:117
-#, fuzzy, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "PostgreSQL of MySQL databasisbediener"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "e-Pos"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Postfix e-pos-bediener"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL of MySQL databasisbediener"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Netwerkrekenaar-bediener"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "KDE Werkstasie"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Die K-werkskermomgewing (KDE), die basiese grafiese omgewing met 'n "
-"versameling bygaande hulpprogramme"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "GNOME-werkstasie"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"'n Grafiese omgewing met  gebruikersvriendelike stel applikasies en "
-"werkskerm-hulpprogramme"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Ander Grafiese Werkskerms"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Nutsprogramme"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "SSH-bediener"
-
-#: share/compssUsers.pl:186
-#, fuzzy, c-format
-msgid "Webmin"
-msgstr "Webkamera"
-
-#: share/compssUsers.pl:187
-#, fuzzy, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Terminal Server Konfigurasie"
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Monitor van Netwerk"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, fuzzy, c-format
-msgid "Mandriva Wizards"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/compssUsers.pl:197
-#, fuzzy, c-format
-msgid "Wizards to configure server"
-msgstr "Probleme met die konfigurasie van drukker \" %s\"!"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-
-#: standalone.pm:57
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[OPSIES] [PROGRAMNAAM]\n"
-"\n"
-"OPSIES:\n"
-"  --help           - vertoon hierdie hulp boodskap.\n"
-"  --report         - program behoort een van die Mandriva nutsprogramme te "
-"wees\n"
-"  --incedent       - program behoort een van die Mandriva nutsprogramme te "
-"wees"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-
-#: standalone.pm:84
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIONS]...\n"
-"Mandriva Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[sleutelbord]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Gebruik: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, fuzzy, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "U moet afteken en weer inteken alvorens veranderinge bekragtig word"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr "U moet afteken en weer inteken alvorens veranderinge bekragtig word"
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "Waardeloos sonder Terninaal-bediener"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s benodig 'n gebruikernaam...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s:%s benodig die rekenaarnaam,MAC-adres, IP, 'nbi-image', 0/1 vir "
-"maerkliënt, 0/1 vir die Plaaslike Konfigurasie...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s:%s benodig 'n rekenaarnaam...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Terminal Server Konfigurasie"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Ontsper Bediener"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Versper Bediener"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Skop Bediener Af"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Stop Bediener"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Net-selflaai-beelde"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Gebruikers Byvoeg/Verwyder"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Voeg by/Verwyder Kliënte"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Beelde"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "First Time Wizard"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Kanseleer die Wysgeer"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr "Stoor asb dhcpd konfigurasie!"
-
-#: standalone/drakTermServ:421
-#, fuzzy, c-format
-msgid "Use thin clients."
-msgstr "Laat Maerkliënte toe."
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, fuzzy, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"Please select client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "Skep netwerk selflaai-beelde vir al die kernels"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Hierdie sal 'n paar minute duur."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Klaar!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-"Sinkroniseer die bediener se gebruikerslys met die kliënt se lys, \"root\" "
-"inkluis."
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-"Om die veranderinge vir die maerkliënte te aktiveer, moet die "
-"vertoonbestuurder herbegin word. Sal ons voortgaan?"
-
-#: standalone/drakTermServ:537
-#, fuzzy, c-format
-msgid "Terminal Server Overview"
-msgstr "drakTermServ Oorsig"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Selflaai Disket"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "Selflaai-ISO"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "PXE Beeld"
-
-#: standalone/drakTermServ:731
-#, fuzzy, c-format
-msgid "Default kernel version"
-msgstr "Dien kernel se weergawe in"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Bou die Hele 'Kernel' -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Geen kernel is gekies!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Bou Enkel NIC -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "Geen NIC gekies!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Bou Alle Kernels -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<--Verwyder"
-
-#: standalone/drakTermServ:801
-#, fuzzy, c-format
-msgid "No image selected!"
-msgstr "Geen NIC gekies!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Verwyder alle NBIs"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Dui dat die wagwoord in die stelsel se databasis verskil van\n"
-"die een in die 'Terminal Server' sin.\n"
-"Om weer die aanteken-vermoë te bekragtig, verwyder/voeg gebruiker by die\n"
-"'Terminal Server'."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Voeg gebruiker by -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Verwyder gebruiker"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "tipe: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "plaaslike konfigurasie: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Laat plaaslike hardeware-\n"
-"konfigurasie toe."
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "Geen netwerk-selflaai beelde is geskep"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Maerkliënt"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Laat Maerkliënte toe"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Voeg Kliënt By -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "tipe: fat"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "tipe: dun"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "plaaslike konfigurasie: onwaar"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "plaalike konfigurasie: waar"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Redigeer Kliënt"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Versper Plaaslike Konfigurasie"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Verwyder Kliënt"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd Konfigurasie ..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Umoet die Vertoonbestuurder herbegin om die veranderinge te bekragtig.\n"
-"('service dm restart' - vanaf die konsole )"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr ""
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Subnet:"
-
-#
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Netmasker:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Roteerders:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet-masker:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Uitsaai-adres:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Domeinnaam:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "DNS-bedieners:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Begin van IP-reeks:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "IP-Reeks se Einde:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Skryf Konfigurasie"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd Bediener-konfigurasie"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Meeste van hierdie waardes kom\n"
-"uit u huidige konfigurasie.\n"
-"U kan dit verander soos benodig."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Plaas disket in aandrywer:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Geen toegang tot skyf nie!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Disket kan nou verwyder word"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Geen disketdrywer beskikbaar nie!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "PXE beeld is %s/%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "Fout met die skryf van %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO-beeld is %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Iets is fout! - Is mkisofs geïnstalleer?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Moet eers '/etc/dhcpd.conf skep!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr "%s se wagwoord nie korek in Terminaal-bediener - herskryf...\n"
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s is nie 'n gebruiker nie...\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s is alreeds 'n gebruiker op die Terminaal-bediener\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "Probleme met die byvoeg van %s op die Terminaal-bediener\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "%s is bygevoeg by die Terninaal-bediener\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "%s bespeur...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "%s is nie gevind nie...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "'/etc/hosts.allow' en 'etc'hosts.deny' is alreeds gekonfigureer"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Konfigurasie het verander - herbegin 'clusterfs/dhcpd'?"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Fout!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Outoinstallasiekonfigurasieprogram"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"U gaan nou 'n Outomatiese Installasie disket opstel. Die gebruik daarvan kan "
-"gevaarlik wees, en u moet bewus wees daarvan.\n"
-"\n"
-"Dit laat u toe om die installasie, wat u op hierdie rekenaar uitgevoer het, "
-"te kan herhaal.(op 'n ander rekenaar) U sal hier en daar gevra word om die "
-"waardes van sekere stappe te verander, sou u so verkies.\n"
-"\n"
-"Die skep van partisies en formattering daarvan sal altyd nog voor gevra word."
-"Dit is om te verhoed dat u ongewense glipse maak.\n"
-"\n"
-"Sal ons voortgaan?"
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "herspeel"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "selfdoen"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Outomatiese Stappe Konfigurasie"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Gaan asseblief deur elke stap, en kies of dit moet herspeel soos tydens die "
-"installasie, of dit vir u moet wag"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Outo-installasieskyf word geskep."
-
-#: standalone/drakautoinst:90
-#, fuzzy, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Sit 'n leë floppie in aandrywer %s"
-
-#: standalone/drakautoinst:91
-#, fuzzy, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Outo-installasieskyf word geskep."
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Welkom.\n"
-"\n"
-"Die parameters van die outo-installasie is beskikbaar in die linker afdelings"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Geluk!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die floppie is sukselvol geskep.\n"
-"U kan nou weer 'n installasie uitspeel."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Outomatiese-installasie"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Voeg 'n item by"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Verwyder die laaste item"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"'Expect' is 'n uitbreiding op die Tcl-skriptaal. Dit kan interaktiewe "
-"sessies, SONDER dat die gebruiker inmeng, meebring."
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "Stoor hierdie rekenaar se wagwoord in 'drakbackup' se konfigurasie."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"Slegs die eerste sessie sal die cdrw uitvee, INDIEN u 'n multi-sessie CD "
-"gebruik. Andersins sal die cdrw uitgevee word met elke rugsteun."
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"Hierdie opsie sal lêers wat verander het stoor. Presiese gedrag hang af "
-"indien Aanwas of Differensiële modus gebruik word."
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"'n Aanwas-rugsteun stoor slegs lêers wat nuut bygekom het of die wat "
-"verander het sedert die laaste rugsteun."
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"'n Differensiële rugsteun stoor slegs die lêers wat nuut bygekom het, of "
-"verander is, sedert die 'base' rugsteun gedoen is."
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"Hierdie moet 'n plaaslike gebruiker of die e-posadres waarna u die resultate "
-"van die rugsteun na toe wil stuur. Spesifiseer 'n funksionele e-pos bediener"
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"Lêers of wisselkaarte wat in die '.backupignore' lêer in die top van 'n "
-"gidsboom gelys is, sal nie deel van die rugsteun wees nie."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"Indien u 'n rugsteun na 'n ander media skryf, sal daar eers lêers op die "
-"hardeskyf geskep word en dan oorgeskuif word. Om daarna hierdie 'tar' lêers "
-"van u hardeskyf te verwyder, moet u hierdie opsie aktiveer."
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"Party protokolle, soos 'rsync', kan aan die bediener se kan gekonfigureer "
-"word. In pleks van 'n roete na die lêergids te gebruik, sal u die 'module' "
-"naam vir die diens se roete gebruik."
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"Aangepaste, laat u toe om u eie dag en tyd te spesifiseer. Die ander opsies "
-"gebruik crontab inskrywings in '/etc/crontab'."
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Interval Cron nie beskikbaar vir normale gebruikers"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr "\"%s\" is nie 'n korrekte e-posadres of 'n plaaslike gebruiker nie!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"\"%s\" is 'n plaaslike gebruiker, maar u het nie 'n plaaslike SMTP gekies "
-"nie. Hieroor moet u 'n volledige e-posadres voorsien!"
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr "Geldige lys van gebruikers het verander, herskryf konfigurasie-lêer."
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "Ou gebruiker-lys:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "Lys van nuwe gebruikers:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      DrakBackup Verslag \n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      DrakBackup Daemon Verslag\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Raporteer Detail\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Totale vordering"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s bestaan, verwyder dit?\n"
-"\n"
-"Indien u reeds hierdie stap deurgegaan het, sal u\n"
-"moontlik die inskrywing moet verwyder uit die 'authorized_keys' \n"
-"op die bediener."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Dit sal 'n rukkie neem om die sleutels te genereer."
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "Kan nie %s voortbring nie."
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Geen wagwoord-porteks op %s by poort %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Slegte wagwoord op %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Toegang geweier met die oordrag van %s na %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Kan nie %s op %s vind nie"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s reageer nie"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"Suksesvolle Oordrag\n"
-"U kan net seker maak dat u by die bediener kan inteken:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"sonder om 'n wagwoord-porteks te ontvang."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "Geen CD-R/DVD-R in aandrywer!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Wil voorkom of dit nie skryfbare media is nie!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Nie-uitveebare media!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Dit mag 'n rukkie duur om die media uit te vee."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Toegangsprobleme na CD"
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "Geen band in %s!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Maak 'n rugsteun van die 'system'-lêers..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Hardeskyf Rugsteun lêers..."
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Rugsteun Gebruiker-lêers..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Skep 'n rugsteun van \"ander \" lêers..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Hardeskyf Rugsteun Vordering..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Geen veranderinge, geen rugsteun!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteite deur %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"Probleem met FTP-konneksie: dit was nie moontlik om u lêers via FTP te "
-"rugsteun nie.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-"Probleme met die stuur van die lêer via FTP. Gaan asseblief u FTP-"
-"konfigurasie na."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "lêerlys deur FTPgestuur: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteite via CD:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup deur magnetiese band:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr "Fout met stuur van e-pos. U verslag is nie gepos nie."
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr "Fout met die stuur van e-pos. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Kan nie katalogus skep nie!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-" Merk asseblief al die opsies wat u benodig.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Hierdie opsies kan alle lêers in u '/etc' lêergids rugsteun en herstel.\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Rugsteun u stelsel-lêers: (/etc lêergids)"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-"Gebruik Aanwas-/Differensiële-rugsteune  (moet nie ou regsteune vervang nie)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Gebruik Aanwas-rugsteun"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "Gebruik Differensiële Rugsteune"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Moet nie kritiese lêers insluit nie (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Hierdie opsie stel u instaat om enige weergawe van u \n"
-"'/etc' lêergids te herstel."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Kies al die gebruikers wie ingesluit moet word by die rugsteun."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "Moet nie die blaaier se kasgeheue insluit nie"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Kies die lêers en lêergidse, klik daarna op 'OK'"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Verwyder  Gekose"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Gebruikers"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Gebruik netwerkkonneksie vir rugsteun"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Netwerkmetode:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "Gebruik, behalwe vir SSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "Skep/Dra rugsteun sleutels vir SSH oor"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Dra Nou Oor"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Ander (nie drakbackup) sleutels alreeds in plek"
-
-#
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Rekenaarnaam of IP"
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-"Lêergids (of module) waarop rugsteun vir hierdie rekenaar geplaas moet word."
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Onthou hierdie wagwoord"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Benodig rekenaarnaam, gebruikernaam en wagwoord!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Gebruik CD-R/DVD-R vir maak van rugsteun"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Kies u CD/DVD toestel"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Kies die mediagrootte van u CD/DVD"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "Multisessie-CD"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "CDRW media"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Vee u RW-media uit (1e Sessie)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " Wis Nou "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "DVD+RW-media"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "DVD-R-media"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "DVDRAM-toestel"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "Geen opgestelde CD!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Skryf rugsteun na magnetiese band"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Toestel om vir rugsteun te gebruik"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Geen opwen na rugsteun"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Vee magnetiese band uit, voor begin met rugsteun"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Skop band uit na die rugsteun"
-
-#
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Voorsien die lêergids om na te stoor:"
-
-#
-#: standalone/drakbackup:1948
-#, fuzzy, c-format
-msgid "Directory to save to"
-msgstr "Voorsien die lêergids om na te stoor:"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CD-R / DVD-R"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Hardeskyf / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "uurliks"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "daagliks"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "weekliks"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "maandeliks"
-
-#
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "aangepaste"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Januarie"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Februarie"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Maart"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "April"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Mei"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Junie"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Julie"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Augustus"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "September"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Oktober"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "November"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Desember"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Sondag"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Maandag"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Dinsdag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Woensdag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Donderdag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Vrydag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Saterdag"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Gebruik daemoon"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Kies asseblief die tydsinterval tussen elke rugsteun"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "Aangepaste 'setup/crontab' inskrywing:"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Minuut"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Uur"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Dag"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Maand"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Weeksdag"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Kies asseblief die media vir die rugsteun."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Maak tog seker dat 'cron' deel is van u dienste."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-"Neen kennis dat alle 'net' media tans ook van die hardeskyf gebruik maak."
-
-#: standalone/drakbackup:2188
-#, fuzzy, c-format
-msgid "Please choose the compression type"
-msgstr "Kies asseblief die datum om te herstel:"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Gebruik '.backupignore'-lêers"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Stuur 'n e-posverslag na elke rugsteun na:"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "SMTP-bedienernaam:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-"Verwyder .tar-lêers vanaf hardeskyf, sodra 'n rugsteun na\n"
-"ander media voltooi."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Wat"
-
-#
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Waar"
-
-#
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Wanneer"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Meer Opsies"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "Rugsteun se bestemming nie opgestel nie..."
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup Konfigurasie"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Kies asseblief die plek waarna u wil regsteun"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "Hardeskyf word gebruik om alle rugsteune vir alle media voor te berei"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "Oor Die Netwerk"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "Op CD-R"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "Op Band-toestel"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Rugsteun-gebruikers"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (Verstek is alle gebruikers)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Kies asseblief wat u wil rugsteun"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Rugsteun Stelsel"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Kies self gebruikers"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Kies asseblief data wat gerugsteun moet word...."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Rugsteun-bronne: \n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-" - Stelsel-lêers:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Gebruiker se Lêers:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ander Lêers:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Stoor op Hardeskyf op roete: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tBeperk gebruik van skyfspasie tot %s MB\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Verwyder .tar-lêers vanaf hardeskyf, na rugsteun.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-" Skryf na CD"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " op toestel: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (multi-sessie)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-" Stoor na Band op toestel: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tVerwyder=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- Stoor via %s op rekenaar: %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t gebruikernaam: %s\n"
-"\t\t op roete: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"-Opsies:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tMoet nie stelsel-lêers insluit nie\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tRugsteun gebruik 'tar' en 'bzip2'\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tRugsteun gebruik 'tar' en 'gzip'\n"
-
-#: standalone/drakbackup:2518
-#, fuzzy, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tRugsteun gebruik 'tar' en 'gzip'\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\t Gebruik '.backupignore' lêers\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tStuur e-pos na %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tGebruik SMTP-bediener %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Daemoon %s via:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hardeskyf.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t - Band \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netwerk deur FTP.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t* Netwerk deur SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Netwerk deur 'rsync'.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Geen konfigurasie nie, gebruik Wysgeer of Gevorderd.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lys van data om te herstel:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- Herstel- Stelsel-lêers.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - vanaf datum: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- Herstel Gebruiker se Lêers: \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "-Herstel Ander Lêers: \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lys van korrupte data:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Moet nie kies nie, of verwyder dit die volgende keer."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Rugsteun-lêers is korrup"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          All u gekose data is          "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          Suksesvolle Herstel op %s       "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "         Herstel Konfigurasie       "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "OK om die ander lêers te herstel."
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Gebruikers om te herstel ( slegs die mees onlangse datum / gebruiker is "
-"belangrik)"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "Kies asseblief die datum om te herstel:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Herstel vanaf Hardeskyf"
-
-#
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Voorsien die lêergids waar rugsteun na geskryf gaan word"
-
-#: standalone/drakbackup:3035
-#, fuzzy, c-format
-msgid "Directory with backups"
-msgstr "Herstel alle rugsteune"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Kies 'n ander media om vanaf te herstel"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Ander Media"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Herstel stelsel"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Herstel Gebruikers"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Herstel Ander"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "kies roete om te herstel (instede van /)"
-
-#
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, fuzzy, c-format
-msgid "Path To Restore To"
-msgstr "Aangepaste-herstel"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Maak 'n nuwe rugsteun voor herstel (slegs vir 'n aanwas-rugsteun.)"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "Verwyder gebruiker se lêergidse alvorens begin met die herstel."
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr "Lêernaam se teks om voor te soek(lëe string sal alles kies):"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "Deursoek Rugsteun"
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "Geen trefslae gevind nie..."
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Verwyder Gekose"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-"Klik datum/tyd om die rugsteun-lêers te sien.\n"
-"Ctrl-klik lêers om 'n verskeidenheid te kies."
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"Herstel Gekose\n"
-"Katalogus-inskrywing"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Herstel Gekose\n"
-"Lêers"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "Kon nie rugsteun-lêers by %s vind nie"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Herstel vanaf CD"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Plaas CD met die volume-naam %s\n"
-"in die CD-aandrywer onder hegpunt /mnt/cdrom"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Nie die korrekte CD nie. CD is %s genoem."
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Herstel vanaf Magnetiese Band"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Plaas band met volume-naam %s\n"
-"in die aandrywer %s"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Nie die korrekte etiket nie. Band se etiket is %s."
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Herstel Deur Netwerk"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Herstel Via Netwerkprotokol: %s"
-
-#
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Rekenaarnaam"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Roete na Rekenaar of Module"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Benodig wagwoord"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Benodig gebruikerskode"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Rekenaarnaam word benodig"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Benodig Roete of Module"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "Lêers Wat Herstel Is...."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Herstel Het Gefaal..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "%s is nie gevind nie.."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Opsoek na lêers om te herstel"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Herstel alle rugsteune"
-
-#
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Aangepaste-herstel"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Herstel Vanaf Katalogus"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Kon nie 'n rugsteun om te herstel vind nie...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Is %s die korrekte roete?"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " en die CD in die aandrywer is"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr "Rugsteune op nie-hegbare media - Gebruik Katologus vir herstel"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "CD in sy plek - gaan voort."
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "Blaai tot by nuwe herstel-pakplek."
-
-#: standalone/drakbackup:3825
-#, fuzzy, c-format
-msgid "Directory To Restore From"
-msgstr "Herstel vanaf CD"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Vordering van Herstel"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Rugsteun in Aanbou"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Herstel"
-
-#
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Die volgende pakkette geïnstalleer word:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Kies asseblief data om te herstel..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Rugsteun die stelsel-lêers"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Rugsteun gebruiker se lêers"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Rugsteun ander lêers"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Totale Vordering"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "Stuur lêers via FTP"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Stuur lêers..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Maak nou 'n rugsteun vanaf konfigurasie-lêer"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Bekyk Rugsteun-konfigurasie."
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Wysgeer Konfigurasie"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Gevorderde-konfigurasie"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Bekyk Konfigurasie"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "Bekyk Laaste Log"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Rugsteun Nou"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Geen konfigurasielêer te vinde \n"
-"klik op Wysgeer of Gevorderd."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Lêer"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Lêer/_Verlaat"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"U rekenaar se selflaai program is nie in \"framebuffer\"-modus nie. Om te "
-"aktiveer, kies 'n grafiese-video modus vanuit die selflaai nutsprogram."
-
-#: standalone/drakboot:127
-#, fuzzy, c-format
-msgid "Do you want to configure it now?"
-msgstr "Wil u die konfigurasie toets?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Installeer temas"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Keuse van die Grafiese selflaai tema"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Temas"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Vertoon tema\n"
-"onder konsole"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Skep 'n nuwe tema"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Verstekgebruiker"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Verstek werkskerm"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Nee, ek verlang NIE outo-aanteken NIE"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ek verlang outo-inteken met hierdie (gebruiker,werkskerm)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Stelselmodus"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Laai X-Windowstelsel met herlaai"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, fuzzy, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Mandriva Linux Bug Report Tool"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Mandriva Linux Control Center"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Sinkronisasie-nutsprogram"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Alleenstaande nutsprogramme"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Eksterne Beheer"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Software Manager"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Nutsprogram vir Windows-migrasie "
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Konfigurasie-assistente"
-
-#: standalone/drakbug:81
-#, fuzzy, c-format
-msgid "Select Mandriva Tool:"
-msgstr "Mandriva Bug Report Tool"
-
-#: standalone/drakbug:82
-#, fuzzy, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"Programnaam\n"
-"of volle roete:"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Soek Pakket"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Pakket: "
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
-
-#: standalone/drakbug:100
-#, fuzzy, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"Klik die 'Verslag' knoppie, indien u 'n foutverslag wil instuur.\n"
-"Dit sal die blaaier oopmaak op %s\n"
-"en 'n vorm om in te vul aan u toon. Die bogenoemde inligting\n"
-"sal na daardie bediener gestuur word."
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Verslag"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Nie geïnstalleeer"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Pakket is nie geïnstalleer nie"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, fuzzy, c-format
-msgid "not defined"
-msgstr "nie gekonfigureer nie"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Verander Tydsone"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Tydsone - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Is u Hardewareklok gestel vir GMT?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "Network Time Protocol"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"U rekenaar kan sy tyd sinchroniseer\n"
-"met 'n eksterne tyd-bediener deur NTP"
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Aktiveer Network Time Protocol"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Bediener:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Herstel"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Ons moet die ntp-pakket installeer\n"
-"om die NTP protokol te aktiveer\n"
-"\n"
-"Wil u ntp installeer?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerkkonfigurasie (%d toestelle)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Portaal:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Koppelvlak:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Net 'n oomblik"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Koppelvlak"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Toestand"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Rekenaarnaam: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Stel rekenaarnaam op..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "LAN-konfigurasie"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Stel plaaslike netwerk op..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Pas toe"
-
-#: standalone/drakconnect:198
-#, fuzzy, c-format
-msgid "Manage connections"
-msgstr "Kabelkonneksie"
-
-#: standalone/drakconnect:225
-#, fuzzy, c-format
-msgid "Device selected"
-msgstr "Verwyder  Gekose"
-
-#: standalone/drakconnect:307
-#, fuzzy, c-format
-msgid "IP configuration"
-msgstr "CUPS-konfigurasie"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "DNS-bedieners"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Deursoek Domein"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "staties"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr ""
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Beheer van Vloei"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Lyn-terminasie"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Tydsbeperking vi modem"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Gebruik slot-lêer"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Wag vir skakeltoon voor skakel"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "Wag as besig"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "Modem se klank"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Aktiveer"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Deaktiveer"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Media-klas"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Modulenaam"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "MAC-adres:"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Bus"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Ligging op die bus"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
-"hardewarekonfigurasieprogram."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Verwyder 'n netwerkkoppelvlak"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Kies die netwerkkoppelvlak om te verwyder"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Daar was 'n probleem met die verwydering van die \"%s\" koppelvlak:\n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "Geluk, die \"%s\" netwerkkoppelvlak is suksesvol verwyder"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "Geen IP"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Geen Masker"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "op"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "af"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Gekonnekteer"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Nie gekonnekteer"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Diskonnekteer..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Konnekteer..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Pasop, daar is 'n ander internet konneksie, wat moontlik u netwerk gebruik, "
-"bespeur"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "Deaktiveer nou dadelik"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "Aktiveer nou dadelik"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"U het geen koppelvlak wat opgestel is nie.\n"
-"Stel hulle eers op deur op deur op 'Konfigureer' te klik"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "LAN-konfigurasie"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Toestel %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Herlaaiprotokol"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Gelaai tydens herlaaityd"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Hierdie koppelvlak is nog nie opgestel nie.\n"
-"Loods die \"Add an interface\"-assistent vanuit die Mandriva Linux Control "
-"Center"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, fuzzy, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Hierdie koppelvlak is nog nie opgestel nie.\n"
-"Loods die \"%s\"-assistent vanuit die Mandriva Linux Control Center"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, fuzzy, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Verwyder 'n netwerkkoppelvlak"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Internetkonneksie-konfigurasie"
-
-#: standalone/drakconnect:1035
-#, fuzzy, c-format
-msgid "Third DNS server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Internetkonneksiekonfigurasie"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Internettoegang"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Konneksietipe:"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Status:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, fuzzy, c-format
-msgid "XDM (X Display Manager)"
-msgstr "Kies 'n vertoonbestuurder"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Kies 'n vertoonbestuurder"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"'X11 Display Manager' laat u toe om, deur 'n grafiese- \n"
-"koppelvlak, aan te teken op u rekenaar. Die 'X Window'-stelsel kan tergelyk\n"
-"'n aantal X-sessies op dieselfde rekenaar afskop."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Die veranderinge is voltooi, wil u die 'dm' diens oorbegin?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "herlaaiskyf-skepping"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Algemeen"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Toestel"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Weergawe van kernel"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Voorkeure"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Gevorderde voorkeure"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Grootte"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Mkinitrd opsionele parameters"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "forseer"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "laat RAID-modules weg"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "indien nodig"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "laat SCSI-modules weg"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Voeg module by"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Verwyder module"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Versker asb dat die regte mediatipe vir toestel %s beskikbaar is"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Daar is geen medium in toestel %s nie.\n"
-"Sit asb. een in."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Kon nie vurk nie: %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Skep van disket is voltooi"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "Die selflaai-disket is suksesvol geskep.\n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Kon nie mkbootdisk ordentelik afsluit nie:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Opsoek na geïnstalleerde lettertipes"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Nie-gekose lettertipes geïnstalleer"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "ontleed alle lettetipes"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "Geen lettertipes gevind"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "klaar"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "Kon nie enige lettertipes in u gehegte partisies vind nie"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Herkies die korrekte lettertipes"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "Kon nie enige lettertipes vind nie.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Soek vir lettertipes in geïnstalleerde lys"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "%s lettertipe-omsetting"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Kopieer Lettertipes"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Ware lettertipe (True Type) installasie"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "wag asseblief gedurende 'ttmkfdir'..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "'True Type' (lettertipes) installasie"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "type1inst building"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "Gostscript verwysing"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Onderdruk tydelike-lêers"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Herbegin XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Onderdruk Lettertipe-lêers"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "herbegin xfs"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Maak tog seker dat u die reg tot gebruik van lettertipes het, voordat u dit "
-"installeer.\n"
-"\n"
-"- U kan hierdie lettertipes op die normale manier installeer. In "
-"uitsonderlike gevalle mag dit X laat vries."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Lettertipe-lys"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Omtrent"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Verwyder"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Trek in"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Kies die programme wat die lettertipes sal ondersteun"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Maak tog seker dat u die reg tot gebruik van lettertipes het, voordat u dit "
-"installeer.\n"
-"\n"
-"U kan hierdie lettertipes op die normale manier installeer. In uitsonderlike "
-"gevalle mag dit X laat vries."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Generiese Drukkers"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Kies die fontlêer of lêergids en klik op 'Voeg by'"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Lêerkeuse"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Trek Lettertipes in"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Installasie van Lettertipes"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "indien u seker is, klik hier."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "hier indien nee."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Herstel Keuses"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Kies almal"
-
-#
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Verwyder Lys"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "Trek Lettertipes in"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Begin-toetse"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopieer lettertipes op u stelsel"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Installeer & omskep die Lettertipes"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Post-installasie"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Verwyder lettertipes vanaf u rekenaar"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Post-Verwyder"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Internetkonneksiedeling"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Jammer, slegs 2.4 kernels en later word ondersteun."
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetkonneksiedeling is gesper"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "aktiveer"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "herkonfigureer"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "ignoreer/sien oor"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Bedieners word geaktiveer..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Internet-konneksie-deling is geaktiveer"
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetkonneksie-deling is ontsper"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "deaktiveer"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Bedieners word gedeaktiveer..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Internetkonneksiedeling is gedeaktiveer"
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"U gaan nou u rekenaar so opstel dat die die Internetkonneksie deel.\n"
-"As dit opgestel is, kan ander rekenaars op die LAN gebruik maak van hierdie\n"
-"rekenaar se konneksie na die Internet.\n"
-"\n"
-"Maak tog seker dat u alreeds die Netwerk/Internet toegang opgestel het deur\n"
-"'drakconnect' te gebruik, alvorens u verder gaan.\n"
-"\n"
-"Let Wel: U benodig 'n Netwerkkaart om die LAN gedeelte te maak werk."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Koppelvlak %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Netwerkkoppelvlak"
-
-#
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
-"\n"
-"%s\n"
-"\n"
-"Ek gaan nou u LAN met daardie kaart opstel."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Kies die netwerkkoppelvlak"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Kies asseblief die netwerkkaart wat aan u LAN gekoppel is."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Netwerk-koppelvlak alreeds gekonfigureer"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Waarskuwing, die netwerk-aansluiter (%s) is reeds opgestel.\n"
-"\n"
-"Wil u dit outomaties herkonfigureer?\n"
-"\n"
-"U kan dit self doen, maar moet uitmaak, maak uit?"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Outomatiese herkonfigurasie"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "Nee (slegs kenners)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Wys die huidige koppelvlak-konfigurasie"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Huidige koppelvlak-konfigurasie"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Huidige konfigurasie van '%s':\n"
-"\n"
-"Netwerk: %s\n"
-"IP-adres: %s\n"
-"IP attribution: %s\n"
-"Drywer: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Ek kan u huidige konfigurasie behou en aanneem u het alreeds 'n DHCP "
-"bediener opgestel, in hierdie geval, maak tog seker dat ek die Netwerk "
-"korrek lees vir u plaaslike netwerk, Ek gaan dit nie herkonfigureer nie, en "
-"ook nie verander aan u DHCP bediener se konfigurasie nie.\n"
-"\n"
-"Die verstek DNS inskrywing is die van die 'Caching Nameserver' gekonfigureer "
-"op die vuurmuur. U kan dit vervang met die van u ISP DNS IP, byvoorbeeld:\n"
-"\t\t      \n"
-"Anders kan ek u netwerk en 'n DHCP bediener vir u konfigureer of oor "
-"konfigureer.\n"
-"\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Plaaslike Netwerkadres"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"Konfigureer die DHCP-bediener.\n"
-"\n"
-"Hier kan u die verskillende opsies kies vir die DHCP-bediener.\n"
-"Sou 'n opsie onbekend wees aan u, laat staan dit bloot net."
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Hierdie) DHCP-bediener se IP"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "Die DNS-bediener se IP"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Die interne domeinnaam"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "Die DHCP-reeks se begin"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "Die DHCP-reeks se einde"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Die verstek huur tydperk (in sekondes)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Die maksimun huur tydperk (in sekondes)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Herkonfigureer die koppelvlak en DHCP-bediener"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Die plaaslike netwer het nie met 'n '0' voltooi nie, ontsnap hier."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Moontlike LAN-adresbotsing in konfigurasie gevind%s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Konfigurasie in aabou..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme met Installasue van pakket %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Alles is nou opgestel.\n"
-"U kan nou die Internet-konneksie met ander rekenaars op u LAN deel, deur "
-"outomatiese netwerk konfigurasie te gebruik (DHCP) en\n"
-"'n Deursigtige instaanbediener (SQUID)."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"Kopiereg © 2003-2005 Mandriva.\n"
-"Hierdie is vry sagteware en mag versprei word onder die terme van die GNU "
-"GPL.\n"
-"\n"
-"Gebruik: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - vertoon hierdie help     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-" --doc <skakel>           - skakel na 'n ander webblabsy ( vir WM se "
-"verwelkomings gedeelte)\n"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Mandriva Linux Hulp Sentrum"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"Kan nie %s vertoon nie \n"
-" Geen Hulp inskrywing van hierdie tipe nie\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Stelsel verstellings"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Aangepaste verstellings"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Pasmaak & stelsel verstellings"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Redigeerbaar"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Roete"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Gebruiker"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Groep:"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Vergunnigs"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Redigeer die huidige reël"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Hier kan u lêers sien om te gebruik om toegang, eienaars en groepe via msec "
-"reg te setel.\n"
-"U kan selfs u eie reels bepaal wat dan die verstek reels sal vervang."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"Die huidige vlak van sekuriteit is %s\n"
-"Ondersoek of verander vergunningsvlakke"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Op"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Skuif gekose reël een vlak op"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Af"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Skuif gekose reël een vlak af"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Voeg 'n reel by"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Voeg 'n nuwe reël aan die einde by"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Verwyder gekose reël."
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Redigeer"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "blaai"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "gebruiker"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "groep"
-
-#: standalone/drakperm:248
-#, fuzzy, c-format
-msgid "other"
-msgstr "Ander"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Lees"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "Stel \"%s\" in staat om die lêer te lees"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Skryf"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "Laat \"%s\" toe om die lêer te skryf"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Voer uit"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Ontsper \"%s\" om lêer uit te kan voer"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Gebruik vir lêergids:\n"
-"kan slegs deur die eienaar van die lêergids (of lêer) verwyder word"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Gebruik eienaar-id vir uitvoering"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Gebruik groep-id vir uitvoering"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Gebruik:"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Groep :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Huidige gebruiker"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "Indien gemerk, sal die eienaar en groep nie verander nie"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Roete-keuse"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Eienskap"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Konfigureer PXE-bediener"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Konfigurasie van Installasie-bediener"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Kies asseblief die netwerkkoppelvlak wat u wil gebruik vir die dhcp-bediener."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Koppelvlak %s (op netwerk %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"Die DHCP-bediener sal ander rekenaars wat PXE gebruik toelaat om uit 'n "
-"sekere reeks adresse neem.\n"
-"\n"
-"Die netwerkadres is %s en masker is %s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "Die DHCP-ip om mee te begin"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "Die DHCP ip om mee te eindig"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Dui asseblief aan waar die installasie-beeld beksikbaar sal wees.\n"
-"\n"
-"Indien u nie 'n bestaande lêergids het nie, kopieer die CD of DVD se "
-"inhoud.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Lêergids vir installasie-beelde"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Geen beeld gevind nie"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Geen CD- of DVD-beelde gevind nie, kopieer die installasie program en rpm-"
-"lêer"
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Dui asseblief aan waar 'auto_install.cfg' geleë is.\n"
-"\n"
-"Laat dit uit, indien u nie outomatiese installasie modus verlang nie.\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ligging van 'auto_install.cfg'-lêer"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Modus"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Kanaal"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Netwerk:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr " ip :"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Modus:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Inkripsie:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Sein:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "af"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Konnekteer"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Herskandering"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Status"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Ontkoppel"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Herlaai"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "op"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "ALMAL"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "PLAASLIK"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Ignoreer"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, fuzzy, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"Hier kan u die vlak administrasie van sekuriteit op u rekenaar opstel.\n"
-"\n"
-"\n"
-"Die Sekuriteits-administrateur sal die sekuriteits-waarskuwings ontvang\n"
-"indien\n"
-"die 'Sekuriteits-waarskuwings' opsie gekies is. Dit kan 'n gebruikernaam of\n"
-"'n e-pos adres wees.\n"
-"\n"
-"\n"
-"Die Sekuriteitsvlak-kieslys stel u in staat om een van ses vooraf-"
-"opgestelde\n"
-"vlakke te kies.\n"
-"Hierdie vlakke wissel van ligte sekuriteit en maklike gebruik tot "
-"paranoïes,\n"
-"wat geskik is vir uiters sensitiewe toepassings.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Lig</span>: Hierdie is glad nie veilig nie,\n"
-"alhoewel dit rekenaargebruik vergemaklik.\n"
-"Gebruik dit op masjiene wat nie aan 'n netwerk gekoppel is nie,\n"
-"en nie toeganklik tot almal is nie.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standaard</span>: Hierdie is die standaard\n"
-"sekuriteit\n"
-"wat ons aanbeveel vir rekenaars wat aan die Internet gebruik as 'n kliënt\n"
-"\n"
-"<span foreground=\"royalblue3\">Hoog</span>:Daar is reeds versperrings, en\n"
-"meer outomatise toetse word saans gedoen\n"
-"\n"
-"<span foreground=\"royalblue3\">Hoër</span>: Met hierdie sekuriteitsvlak "
-"kan\n"
-"u stelsel as 'n bediener gebruik.\n"
-"Die sekuriteit is goed genoeg sodat die rekenaar konneksies van kliënte\n"
-"af kan aanvaar.\n"
-"Aandag: Indien u masjien bloot 'n  kliënt op die Internet is, kan u 'n laer\n"
-"vlak kies.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoïes</span>: Soortgelyk aan die vorige\n"
-"vlak, maar die rekenaar is totaal toe en sekuriteit is op sy\n"
-"maksimum"
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Beskrywing van die velde:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(verstek waarde: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Sekuriteitsvlak:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Sekuriteits-admin:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Basiese opsies"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Netwerk Opsies:"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Stelsel-opsies"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Periodiese Toetse"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Net 'n oomblik, sekuriteitsvlak word gestel..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Net 'n oomblik, verstel sekuriteitsopsies..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Geen Klankkaart opgespoor!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Geen klankkaart is op u rekenaar bespeur nie. Maak tog seker dat dit 'n\n"
-"Linux-ondersteunde klankkaart is. Kyk of dit reg ingeprop is.\n"
-"\n"
-"\n"
-"U kan ons hardeware-databasis besoek te:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Aandag: Indien u klankkaart 'n ISA PnP tipe kaart is, moet u gebruik maak "
-"van die 'alsaconf' of 'sndconfig' program. Tik \"alsaconf\" of\"sndconfig"
-"\"in op die instruksielyn)."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"die pakket \"ImageMagick\" word benodig om die konfigurasie te voltooi.\n"
-"Klik op \"Ok\" om 'ImageMagick' te installeer of \"Kanselleer\" om te staak"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"x-koördinaat van teksboks\n"
-"in aantal karakters"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"die teksboksie se x koördinaat\n"
-"in aantal karakters"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "teks-wydte"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "tekskassie se hoogte"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"die vorderingsbalk se x koördinaat\n"
-"van sy linker-boonste hoek"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"die vorderingsbalk se y koördinaat\n"
-"van sy linker-boonste hoek"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "die wydte van die vorderingbalk"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "die hoogte van die vorderingbalk"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Vertoon logo op Konsole"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Naam van tema"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "finale resolusie"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "Stoor tema"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "stoor selflaai-splatskerm-tema..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "Kies 'n beeld"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Vorderingstafie se kleurkeuse"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, fuzzy, c-format
-msgid "Add an UPS device"
-msgstr "Voeg 'n item by"
-
-#: standalone/drakups:83
-#, fuzzy, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Welkom by die e-pos konfigurasie-program.\n"
-"\n"
-"Hier kan u die waarskuwing-stelsel opstel\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, fuzzy, c-format
-msgid "Autodetection"
-msgstr "Gebruik outospeuring"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Bespeuring aan die gebeur"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Geluk"
-
-#: standalone/drakups:121
-#, fuzzy, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "Die wysgeer het die e-pos waarskuwings gestop"
-
-#: standalone/drakups:123
-#, fuzzy, c-format
-msgid "No new UPS devices was found"
-msgstr "Geen toestelle gevind nie"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, fuzzy, c-format
-msgid "UPS driver configuration"
-msgstr "CUPS-drukkerkonfigurasie"
-
-#
-#: standalone/drakups:128
-#, fuzzy, c-format
-msgid "Please select your UPS model."
-msgstr "Toets asb. die muis:"
-
-#: standalone/drakups:129
-#, fuzzy, c-format
-msgid "Manufacturer / Model:"
-msgstr "Drukkervervaardiger, model"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Naam:"
-
-#: standalone/drakups:145
-#, fuzzy, c-format
-msgid "The name of your ups"
-msgstr "die verwerker se naam"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Poort:"
-
-#: standalone/drakups:149
-#, fuzzy, c-format
-msgid "The port on which is connected your ups"
-msgstr "die tipe bus waaraan die muis gekoppel is"
-
-#: standalone/drakups:159
-#, fuzzy, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "Die wysgeer het die e-pos waarskuwings geaktiveer."
-
-#: standalone/drakups:250
-#, fuzzy, c-format
-msgid "UPS devices"
-msgstr "Dienste"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Naam"
-
-#: standalone/drakups:269
-#, fuzzy, c-format
-msgid "UPS users"
-msgstr "Gebruikers"
-
-#: standalone/drakups:285
-#, fuzzy, c-format
-msgid "Access Control Lists"
-msgstr "toegang na netwerk-nutsprogramme"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr ""
-
-#: standalone/drakups:298
-#, fuzzy, c-format
-msgid "Rules"
-msgstr "Roteerders:"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Aksie"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Vlak"
-
-#: standalone/drakups:299
-#, fuzzy, c-format
-msgid "ACL name"
-msgstr "LVM naam?"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, fuzzy, c-format
-msgid "DrakUPS"
-msgstr "DrakVPN"
-
-#: standalone/drakups:339
-#, fuzzy, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Toets konfigurasie"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "Die VPN-konneksie is geaktiveer"
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die VPN-konneksie is alreeds gedoen.\n"
-"\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "Deaktiveer VPN..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "Die VPN-konneksie is nou gedeaktiveer."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "VPN-konneksie is tans gesper"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die VPN-konnkesiedeling is alreeds gedoen.\n"
-"\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "VPN word geaktiveer..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "Die VPN-konneksie is nou geaktiveer."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "Eenvoudige VPN opstelling."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-"U is oppad om u rekenaar met 'n VPN konneksie te loop opstel.\n"
-"\n"
-"Hiermee kan rekenaars op u plaaslike netwerk en eksterne rekenaars\n"
-"bronne deel,op 'n veilige manier, deur hulle onderskei vuurmure,\n"
-"via die Internet.\n"
-"\n"
-"Die kommunikasie gebruik enkripsie. Die plaaslike en eksterne\n"
-"rkenaars blyk om op dieselde netwerk te wees.\n"
-"\n"
-"Maak tog seker dat u netwerk/Internet reeds opgestel is deur\n"
-"drakconnect te grbruik alvorens u voortgaan."
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Kernel-module."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-"Die kernel benodig ipsec-ondersteuning.\n"
-"\n"
-"U het tans 'n %skernel weergawe.\n"
-"\n"
-"Dit het '%s'-ondersteuning."
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Sekuriteits Reels"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "IKE daemon racoon"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Konfigurasie-lêer"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-"Volgende gaan ons die %s-lêer opstel.\n"
-"\n"
-"\n"
-"Klik op Volgende.\n"
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr ", %s inskrywings"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-"Die %s lêer se inhoud\n"
-"is opgedeel in seksies.\n"
-"\n"
-"U kan nou :\n"
-"\n"
-"  - seksies vertoon, redigeer, of byvoeg, daarna\n"
-"  - veranderinge stoor\n"
-"\n"
-"Wat verkies u om te doen?\n"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Vertoon"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Stoor"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Vertoon konfigurasie"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-"Die %s-lêer bestaan nie.\n"
-"\n"
-"Hierdie is 'n nuwe opstelling.\n"
-"\n"
-"Gaan terug en kies \"Voeg by\" .\n"
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "ipsec.conf inskrywings"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"Die %s-lêer het verskillende seksies.\n"
-"\n"
-"Hier is die geraamte :\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"U kan nou een van die gedeeltes byvoeg.\n"
-"\n"
-"Kies die gedeelte wat u wil byvoeg.\n"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "config setup"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "normal conn"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Bestaan!"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-"'n Seksie met hierdie naam bestaan reeds.\n"
-"Die seksie se naam moer uniek wees.\n"
-"\n"
-"U sal moet terug gaan en 'n ander seksie skep\n"
-"of sy naam moet verander.\n"
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Hierdie seksie moet bo-aan u\n"
-"%s lêer wees.\n"
-"\n"
-"Maak seker dat ander seksies op hierdie\n"
-" konfigurasie-seksie volg.\n"
-"\n"
-"Kies \"gaan voort\" of \"vorige\" sodra u klaar is.\n"
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "Koppelvlakke"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsdebug"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "plutodebug"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "plutoload"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "plutostart"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "uniqueids"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "left"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"U %s-lêer het verskeie seksies, of konneksies.\n"
-"\n"
-"U kan nou 'n nuwe seksie byvoeg.\n"
-"Kies \"Gaan Voort\" sodra u klaar die data voorsien het.\n"
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "seksienaam"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "auto"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "right"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "rightcert"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-"'n Seksie met hierdie naam bestaan reeds.\n"
-"Die seksie se naam moer uniek wees.\n"
-"\n"
-"U sal moet terug gaan en 'n ander seksie skep\n"
-"of sy naam moet verander.\n"
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Voeg 'n Sekuriteitsreel by.\n"
-"\n"
-"U kan nou 'n Sekuriteisreel byvoeg.\n"
-"\n"
-"Kies \"gaan voort\" sodra u klaar die data voorsien het.\n"
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Redigeer die keuse"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-"U %s-lêer het 'n aantal seksies of konneksies.\n"
-"\n"
-"U kan die een om te redigeer hier onder kies\n"
-"en dan op \"Volgende\" klik.\n"
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Seksienaam"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "Kan nie redigeer nie!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-"U kan nie hierdie seksie redigeer nie.\n"
-"\n"
-"Dit is verpligtend vir Freeswan 2.x.\n"
-"U moet \"version 2.0\" bo-aan die\n"
-"%s-lêer spesifiseer, en later \"opportunistic encryption\" aktiveer of "
-"deaktiveer.\n"
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"U %s-lêer het 'n aantal seksies.\n"
-"\n"
-"U kan nou die \"config setup\" seksie redigeer\n"
-"Kies \"gaan voort\" sodra u klaar is daarmee.\n"
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"U %s-lêer het 'n aantal seksies.\n"
-"\n"
-"U kan nou die \"default section\" seksie redigeer\n"
-"Kies \"gaan voort\" sodra u klaar is daarmee.\n"
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"U %s-lêer het 'n aantal seksies of konneksies.\n"
-"\n"
-"U kan nou die \"normal section\" seksie redigeer\n"
-"\n"
-"Kies \"gaan voort\" sodra u klaar is daarmee.\n"
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Redigeer 'n Sekuriteitsreel.\n"
-"\n"
-"U kan nou 'n sekuriteitsreel byvoeg.\n"
-"\n"
-"Kies \"gaan voort\" sodra u klaar is daarmee.\n"
-
-#
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Verwyder seksie"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-"U %s-lêer het 'n aantal seksies of konneksies.\n"
-"\n"
-"U kan hier onder die een kies om te verwyder\n"
-"klik dan op volgende.\n"
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-"Die %s-lêer bestaan nie.\n"
-"\n"
-"Hierdie is 'n nuwe opstelling.\n"
-"\n"
-"Gaan terug en kies \"Konfigureer\" .\n"
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "racoonf.conf entries"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "path"
-
-#
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "remote"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "path type"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "real file"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-"U %s-lêer het verskeie seksies, of konneksies.\n"
-"\n"
-"U kan vanaf die onderstaande lys een kies om\n"
-"te redigeer, klik dan op volgende.\n"
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"U %s-lêer het verskeie seksies.\n"
-"\n"
-"\n"
-"U kan nou die eksterne seksies redigeer.\n"
-"\n"
-"Kies \"Gaan Voort\" sodra u klaar die data voorsien het.\n"
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-"U %s-lêer het verskeie seksies.\n"
-"\n"
-"U kan nou die sainfo seksie redigeer.\n"
-"\n"
-"Kies \"Gaan Voort\" om die veranderinge te stoor."
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Hierdie seksie moet bo-aan u\n"
-"%s lêer wees.\n"
-"\n"
-"Maak seker dat ander seksies op hierdie\n"
-" konfigurasie-seksie volg.\n"
-"\n"
-"U kan nou die pad se inskrywings redigeer.\n"
-"\n"
-"Kies \"gaan voort\" of \"vorige\" sodra u klaar is.\n"
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "path_type"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-"Alles is nou opgestel.\n"
-"\n"
-"U kan nou u bronne op 'n veilige manier deel,\n"
-"deur die Internet, met 'n VPN konneksie.\n"
-"\n"
-"U moet seker maak dat die shorewall se tonnels\n"
-"gedeelte opgestel is."
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr "Sainfo source address"
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr "Sainfo source protocol"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr "Sainfo destination address"
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr "Sainfo destination protocol"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "PFS-groep"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "Lifetime number"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "Lifetime unit"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "Magtigings-algoritme"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "Kompressie-algoritme"
-
-#: standalone/drakvpn:1036
-#, fuzzy, c-format
-msgid "deflate"
-msgstr "verstek"
-
-#
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Remote"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr "Exchange mode"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "Generate policy"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "Pasief"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-"Indie u nie die onderhandeling wil afskop nie, skakel die\n"
-"aan. Die verstek is af. Dit is handig vir 'n bediener."
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "Tipe sertifikaat"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "My sertifikaat"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "Naam van die sertifikaat"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "My privaat sleutel"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "Naam van die privaat-sleutel"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr "Eweknie se sertifikaat"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr "Naam van die eweknie se sertifikaat"
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "Verivïeer Sertifikaat"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-"Indien u nie die eweknie se sertifikaat wil verivïeer nie\n"
-"sit hierdie dan af. Die verstek is aan."
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "My identifiseerder"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr "Peers identifier"
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr "Voorstelling"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "Hash-algoritme"
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "DH-groep"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Instruksie"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "Bron se IP-reeks"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "bestemming se IP-reeks"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "Bo-laag protokol"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "any"
-msgstr "Dag"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Flag"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Rigting"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "IPsec-reels"
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "ipsec"
-msgstr "Msec"
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "discard"
-msgstr "ge-deaktiveer"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "tunnel"
-msgstr "Kanaal"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "transport"
-msgstr "reeds versend"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Bron/bestemming"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "verstek"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "use"
-msgstr "Muis"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "unique"
-msgstr "uniqueids"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "VSA (uitsaai)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "VSK (kabel)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "VSA (cable-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (uitsaai)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "China (uitsaai)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Wes-Europa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Oos-Europa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Frankryk [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Neu-Seeland"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australise, Optus kabel-TV"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Voorsien asseblief u TV-norm en land"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "TV-norm:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Area:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Aftas vir TV-kanale in wording ..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "Skandeer vir TV-kanale"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Daar was 'n fout met die skandering vir TV-kanale"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Jy moet 'n wonderlike dag hê!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "U kan nou xawtv gebruik ( onder X-Window! )!\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Geen TV-kaart opgespoor!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Geen TV-kaart is op u rekenaar bespeur nie. Maak tog seker dat dit 'n Linux-"
-"ondersteunde Video/TV-kaart is. Kyk of dit reg ingeprop is.\n"
-"\n"
-"\n"
-"U kan ons hardeware-databasis besoek te:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Alternatiewe drywers"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "lys van alternatiewe drywers vir hierdie klankkaart"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"hierdie is die fisiese bus waarop die toestel ingeprop is (bv. PCI, USB, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Bus identifikasie"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- PCI en USB toestelle: lys die vervaardiger, toestel, sub-vervaardiger en "
-"sub-toestel PCI/USB id's"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "Kapasiteit"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "spesiale voordele van die drywer ( skryfvermoë en DVD-ondersteuning)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "Hierdie veld beskryf die toestel"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Ou 'device file'"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "ou statise toestelnaam wat in die dev pakket gebruik word"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Nuwe 'devfs'-toestel"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "nuwe toestelnaam is dinamies geskep deur die kernel se 'devfs'"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Module"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "die GNU/Liunux kernel se module wat die toestel beheer"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "Extended partitions"
-msgstr "Skep 'n nuwe partisie"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "the number of extended partitions"
-msgstr "die verwerker se nommer"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Geometrie"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, fuzzy, c-format
-msgid "Disk controller"
-msgstr "SMBus-beheerders"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "hardeware-toestel se klas"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Model"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "model hardeskyf"
-
-#
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "poort van netwerkdrukker"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "Primary partitions"
-msgstr "Formateer partisies"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "the number of the primary partitions"
-msgstr "die verwerker se nommer"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "toestel se vervaardiger"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, fuzzy, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr ""
-"hierdie is die fisiese bus waarop die toestel ingeprop is (bv. PCI, USB, ...)"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device #"
-msgstr "Dienste"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device number"
-msgstr "Lifetime number"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, fuzzy, c-format
-msgid "PCI function number"
-msgstr "Konneksienaam"
-
-#: standalone/harddrake2:57
-#, fuzzy, c-format
-msgid "Vendor ID"
-msgstr "Vervaardiger"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "Device ID"
-msgstr "Toestel: "
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "toestel se vervaardiger"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "Sub device ID"
-msgstr "Dienste"
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "toestel se vervaardiger"
-
-#: standalone/harddrake2:61
-#, fuzzy, c-format
-msgid "Device USB ID"
-msgstr "Toestel: "
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"die 'GNU/Linux kernel' moet 'n berekening-lus gedurende die selflaai loop om "
-"'n tyds-teller af te skop. Die resultaat word gestoor as 'n 'bogomips', 'n "
-"manier om te toets hou kragtig die CPU is."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Grootte van Kas"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "grotte van die (tweede vlak) verwerker-tussengeheue"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Comba gogga"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "indien hierdie verwerker die 'Cyrix 6x86 Coma'-gogga het"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid-familie"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "CPU se familie (bv. 6 vir i686 tipe)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid vlak"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "inligtingsvlak wat verkry kan word deur die cpuid instruksie"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekwensie (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"die verwerker se frekwensie in MHz ( dit is rofweg hoeveel instruksies "
-"dieverwerker per sekondes kan uitvoer)"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Flaggies"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flaggies deur kernel geraporteer"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv-gogga"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"Vroeë Intel Pentium ververkers het probleme gehad wanneer 'Floating point "
-"DIVision (FDIV)' gedoen moes word. (die presisie was soms nie reg nie)"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "Is FPU teenwoordig"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "ja, beteken dat die verwerker 'n rekenkundige-koverwerker het"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Indien die FPU 'n 'irq-vektor' het"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"ja, beteken dat die rekenkundige-koverwerker 'n eksepsie-vektor aangeheg het"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "F00f-gogga"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"vroeë pentiums het foute gehad en het gevries wanneer 'F00F bytecode' "
-"gedekodeer word"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "Halt-fout"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Van die vroeër i486DX-100 verwerkers kan nie weer betroubaar terugkeur om te "
-"funksioneer na die \"halt\" instruksie gebruik is nie."
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "sub-generasie van cpu"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "verwerker se generasie (bv. 8 vir Pentium III,...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Naam van model"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "verwerker se amptelike handelsnaam"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "die verwerker se naam"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "Verwerker ID"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "die verwerker se nommer"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Stap deur modelle"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "'stepping' van die verwerker (sub-model (generasie) nommer)"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "die verwerker se vervaardiger"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Skryf-beskerming"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"die WP-flaggie in die CD0 -register van die verwerker, forseer beskerming "
-"teen die skryf na geheue-bladsye. Dit vehoed dat die kernel ongehoorde "
-"toegang na die gebruiker-geheue kry (maw. dit beskerm teen goggas (bugs))"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Disket se formaat"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "aandrywer ondersteun die volgende formate"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI channel"
-
-#: standalone/harddrake2:97
-#, fuzzy, c-format
-msgid "Disk identifier"
-msgstr "My identifiseerder"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, fuzzy, c-format
-msgid "Logical unit number"
-msgstr "Logiese-volumenaam "
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, fuzzy, c-format
-msgid "Installed size"
-msgstr "Installeer stelsel"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, fuzzy, c-format
-msgid "Enabled Size"
-msgstr "Aktiveer"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, fuzzy, c-format
-msgid "type of the memory device"
-msgstr "Naam van die eweknie se sertifikaat"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Spoed"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, fuzzy, c-format
-msgid "Bank connections"
-msgstr "Kabelkonneksie"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, fuzzy, c-format
-msgid "Device file"
-msgstr "Ou 'device file'"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, fuzzy, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "met wielletjie-emulasie"
-
-#
-#: standalone/harddrake2:116
-#, fuzzy, c-format
-msgid "the type of the mouse"
-msgstr "Toets asb. die muis"
-
-#: standalone/harddrake2:117
-#, fuzzy, c-format
-msgid "the name of the mouse"
-msgstr "die verwerker se naam"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Aantal knoppies"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "die muis se aantal knoppies"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "die tipe bus waaraan die muis gekoppel is"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, fuzzy, c-format
-msgid "Identification"
-msgstr "Bus identifikasie"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Verbinding"
-
-#: standalone/harddrake2:137
-#, fuzzy, c-format
-msgid "Performances"
-msgstr "Voorkeure"
-
-#: standalone/harddrake2:138
-#, fuzzy, c-format
-msgid "Bugs"
-msgstr "Bus"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Partisies"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Funksies"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Opsies"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Hulp"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Outospeur _drukkers"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Outospeur _modems"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Outospeur _jaz-aandrywers"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Verlaat"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Velde se beskrywing"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake help"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Sodra u 'n toestel gekies het, sal u meer inligting omtrent dit sien in die "
-"velde aan die regterkant (\"Inligting\")"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Raporteer 'n Fout"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Aangaande..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Omtrent Harddrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Hierdie is HardDrake,'n %s program vir hardewarekonfigurasie.\n"
-"<span foreground=\"royalblue3\">Weergawe:</span> %s\n"
-"<span foreground=\"royalblue3\">Skrywer</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, fuzzy, c-format
-msgid "Harddrake2"
-msgstr "HardDrake"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Bespeurde hardeware"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Konfigureer module"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Loop konfigurasieprogram"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "Onbekend"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Onbekend"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Allerande"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Klik op 'n toestel links, om sy inligting hier te vertoon."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "sekondêre"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "primêre"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "skrywer"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Rekening:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Wagwoord:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Masjien naam:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-"Wil u hê dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
-"terugstuur)?"
-
-#: standalone/localedrake:38
-#, fuzzy, c-format
-msgid "LocaleDrake"
-msgstr "Plaaslike meting"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Die verandering is aangebring, maar u moet eers afteken"
-
-#: standalone/logdrake:50
-#, fuzzy, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Mandriva Linux Tools Logs"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Vertoon slegs vir gekose dag"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Lêer/_Nuut"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Lêer/_Oopmaak"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Lêer/_Stoor"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Lêer/Stoor _as"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Lêer/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Opsies/Toets"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Hulp/_Aangaande..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Geldigverklaring"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "Gebruiker"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "Boodskappe"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Syslog"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "soek"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "'n Nutsprogram wat u help met die staaflêers"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Verstellings"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "Passend"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "maar nie passend"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Kies lêer"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Kalender"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Inhoud van die lêer"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "e-pos waarskuwing"
-
-#: standalone/logdrake:169
-#, fuzzy, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "Die waarsku wysgeer het onverwags gestop:"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "net 'n oomblik, ontleed lêer: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "'Apache World Wide Web'-bediener"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Oplosser van Domeinnaam"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "FTP-bediener"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix e-posbediener"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Samba-bediener"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Webmin-diens"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd Service"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "Konfigureer die e-pos waarskuwings"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "Stop die e-pos waarskuwings"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Konfigurasie van e-pos alarm"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom by die e-pos konfigurasie-program.\n"
-"\n"
-"Hier kan u die waarskuwing-stelsel opstel\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Wat wil u doen?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Diens verstelling"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"U sal 'n waarskuwing ontvang indien een van die dienste nie meer beskikbaar "
-"is nie"
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "Laai verstelling"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "U sal 'n waarskuwing ontvang sodra die las hoër as die waarde styg"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Laai"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "Waarsku-konfigurasie"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Voorsien asseblief u e-posadres"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-"en voorsien die naam (of IP-adres) van die SMTP-bediener wat u wil gebruik"
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "Die wysgeer het die e-pos waarskuwings geaktiveer."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "Die wysgeer het die e-pos waarskuwings gestop"
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Stoor as.."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Wat is u muistoestel?"
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Emuleer derde knop?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Toets van muis"
-
-#
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Toets asb. die muis:"
-
-#: standalone/net_applet:45
-#, fuzzy, c-format
-msgid "Network is up on interface %s"
-msgstr "Netwerkkoppelvlak"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, fuzzy, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Netwerk nie gekonfigureer nie"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Konnekteer %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Diskonnekteer %s"
-
-#: standalone/net_applet:70
-#, fuzzy, c-format
-msgid "Monitor Network"
-msgstr "Herstel Deur Netwerk"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Konfigureer die Netwerk"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "Koppelvlakke"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Profille"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr ""
-
-#: standalone/net_applet:223
-#, fuzzy, c-format
-msgid "Interactive intrusion detection"
-msgstr "Outobespeuring van drukkers"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr ""
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr ""
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, fuzzy, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Vuurmuurkonfigurasie gevind!"
-
-#: standalone/net_applet:301
-#, fuzzy, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Wil Taai-sleutels aktiveer?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, fuzzy, c-format
-msgid "Attack details"
-msgstr "Geen Detail"
-
-#: standalone/net_applet:322
-#, fuzzy, c-format
-msgid "Attack time: %s"
-msgstr "Aktiveer %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Netwerkkoppelvlak: %s"
-
-#: standalone/net_applet:324
-#, fuzzy, c-format
-msgid "Attack type: %s"
-msgstr "tipe: %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protokol: %s"
-
-#: standalone/net_applet:326
-#, fuzzy, c-format
-msgid "Attacker IP address: %s"
-msgstr "Deurgang se IP-adres"
-
-#: standalone/net_applet:327
-#, fuzzy, c-format
-msgid "Attacker hostname: %s"
-msgstr "Stel gasheer naam %s: "
-
-#: standalone/net_applet:328
-#, fuzzy, c-format
-msgid "Service attacked: %s"
-msgstr "Diens Bestuurder"
-
-#: standalone/net_applet:329
-#, fuzzy, c-format
-msgid "Port attacked: %s"
-msgstr "Poort: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Monitor van Netwerk"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "Globale Statistieke"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "Onmidelike"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Gemiddeld"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr "Stuurspoed:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr "Ontvangspoed:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr "Konneksietyd: "
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Net 'n oomblik, konneksie word getoets..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "Diskonnekteer van die Internet "
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "Konnekteer aan die Internet"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Probleme met die opbreek van die Internerkonneksie."
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Ontkoppeling van Internet voltooi."
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Voltooide konneksie."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Probleme met die Konneksie\n"
-"Maak tog seker van u konfigurasie in die 'Mandriva Linux Control Center'."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Kleurkonfigurasie"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "stuur: "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "ontvang: "
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "gemiddeld"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Plaaslike meting"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Pasop, daar is 'n ander internet konneksie, wat moontlik u netwerk gebruik, "
-"bespeur"
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "Geen internetkonneksie gekonfigureer"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Lees data van geïnstalleerde drukkers..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "%s Drukker Bestuur Nutsprogram"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Aksies"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Voeg Drukker by"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Maak _Verstel"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Redigeer"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Skrap"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Kundige modus"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Herlaai"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Konfigureer CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Soek:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Pas filter toe"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "Def."
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Drukkernaam"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Konneksietipe"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Bedienernaam"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Voeg Drukker By"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Voeg 'n nuwe drukker by"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Maak verstek"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Maak hierdie die verstekdrukker"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Redigeer gekose drukker"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Verwyder gekose drukker"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Herlaai die lys"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "Konfigureer CUPS"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "Konfigureer die CUPS-drukkerstelsel"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Geaktiveer"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Gestremde"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Programeeerders: "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, fuzzy, c-format
-msgid "Printer Management %s"
-msgstr "Bestuur Drukkers \n"
-
-#: standalone/scannerdrake:51
-#, fuzzy, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr "Die pakket %s moet geïnstalleer word. Wil u dit installeer?"
-
-#: standalone/scannerdrake:55
-#, fuzzy, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Scannerdrake"
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr "Kon nie die pakkette wat Scannerdrake benodig installeer nie."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Scannerdrake sal nie nou afgeskop word nie."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Opsoek na skandeerders wat reeds opgestel is ..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Opsoek na nuwe skandeerders"
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "Vervris die lys van gekonfigureerde skandeerders ..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "Die %s word nie deur hierdie weergawe van %s ondersteun nie."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s gevind op %s, stel dit outomaties op?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s is nie teenwoordig in die skandeerder-databasis nie, stel dit self op?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Kies 'n skandeerder model"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Bespeurde model: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Poort: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr ""
-
-#: standalone/scannerdrake:144
-#, fuzzy, c-format
-msgid "The %s is not supported under Linux."
-msgstr "Die %s word nie deur hierdie weergawe van %s ondersteun nie."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "Moet nie \"firmware\"-lêer installeer nie"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-"Dit mag moontlik wees dat u %s hulle \"firmware\" moet laai sodra hulle "
-"aangeskakel word."
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "In die geval, kan u dit outomaties laat geskeid."
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"Om dit te kan doen, moet u die \"firmware\"-lêers voorsien vir u "
-"skandeerders sodat dit geïnstalleer kan word."
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"U kan die lêer op die CD of disket wat die skandeerder vergesel, die "
-"vervaardiger se tuisblad, of op u Windows-partisie vind."
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Installeer \"firmware\"-lêer vanaf"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Kies \"firmware\"-lêer"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "Die \"firmaware\"-lêer %s bestaan nie of dit is onleesbaar!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-"Dit mag moontlik wees dat u skandeerders hulle \"firmware\" moet laai sodra "
-"hulle aangeskakel word."
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-"Om dit te kan doen, moet u die \"firmware\"-lêers voorsien vir u "
-"skandeerders sodat dit geïnstalleer kan word."
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-"Indie u reeds die \"firmware\" vir u skandeerder geïnstalleer het, kan u dit "
-"hier opdateer deur die nuwe \"firmware\"-lêer te voorsien."
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "Installeer \"firmware\" vir die"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "Kies \"firmware\"-lêer vir die %s"
-
-#: standalone/scannerdrake:276
-#, fuzzy, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Moet nie \"firmware\"-lêer installeer nie"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "Die \"firmware\"-lêer vir u %s het goed geïnstalleer."
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "Die %s word nie ondersteun nie"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"Die %s moet opgestel word deur 'printerdrake'.\n"
-"U kan printerdrake onder die %s Control Center se Hardeware gedeelte vind."
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Outospeur beskikbare poorte"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Kies assblief die toestel waaraan u %s gekoppel is"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Aandag: Kan nie parallelle poorte outospeur nie)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "kies toestel"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Opsoek na skandeerders ..."
-
-#: standalone/scannerdrake:383
-#, fuzzy, c-format
-msgid "Setting up kernel modules..."
-msgstr "Laai USB drukker kernel module ...\n"
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "Aandag !"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, fuzzy, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"U %s is klaar gekonfigureer.\n"
-"U kan nou dokumente skandeer deur \"XSane\" te gebruik."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:406
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"U %s is klaar gekonfigureer.\n"
-"U kan nou dokumente skandeer deur \"XSane\" te gebruik."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Die volgende skandeerders\n"
-"\n"
-"%s\n"
-"is tot u beskikking.\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"Die volgende skandeerder\n"
-"\n"
-"%s\n"
-"is beskikbaar op u rekenaar.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Daar is geen bekikbare skandeerders te vinde nie.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Soek na nuwe skandeerders"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Voeg self 'n skandeerder by"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Installeer / Dateer \"firmware\"-lêers op"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Deel skandeerders"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Alle eksterne rekenaars"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Hierdie rekenaar"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Hier kan u kies of skandeerders wat aan hierdie rekenaar gekoppel is "
-"toeganklik sal wees vir eksterne masjiene, asook watter masjiene."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"U kan ook hier kies of skandeerders van eksterne rekenaars beskikbaar moet "
-"wees op hierdie masjien."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-"Die skandeerders op hierdie rekenaar is tot ander rekenaars se beskikking"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Skandeerder deel na rekenaars: "
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Gebruik skandeerders op eksterne rekenaars"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Gebruik skandeerders op rekenaars: "
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Deel van plaaslike skandeerders"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-"Hierdie masjiene behoort die plaaslik-gekoppelde skandeerder(s) beskikbaar "
-"te stel:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Voeg rekenaar by"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Redigeer gekose rekenaar"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Verwyder gekose rekenaar"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Naam/IP-adres van rekenaar:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-"Kies rekenaar waarop plaaslike skandeerders beskikbaar gestel moet word:"
-
-#
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "U moet 'n rekenaarnaam of 'n IP-adres voorsien\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Die rekenaar is alreeds gelys, en kan nie weer bygevoeg word nie.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Gebruik van eksterne skandeerders"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Gebruik die skandeerders vanaf hierdie rekenaars:"
-
-#: standalone/scannerdrake:940
-#, fuzzy, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr "Die pakket %s moet geïnstalleer word. Wil u dit installeer?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "U skandeerder(s) sal NIE op die netwerk beskikbaar wees NIE. "
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Sommige toestelle in die \"%s\"-hardewareklas is verwyder:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Party toestelle is bygevoeg: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr ""
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Aftas vir hardeware aan die gang"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, fuzzy, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Wil u die konfigurasie toets?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Taal"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Lisensie"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Stel muistoestel op"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Hardeskyf-speuring."
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Kies installasieklas"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Kies u sleutelbord"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Partisionering"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Formateer partisies"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Kies pakkette om te installeer"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Installeer stelsel"
-
-#: steps.pm:25
-#, fuzzy, c-format
-msgid "Administrator password"
-msgstr "Kies 'root' se wagwoord"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Voeg 'n gebruiker by"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Stel netwerk op"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Installeer herlaaistelsel"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Stel X op"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Konfigureer dienste"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Installeer updaterings"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Verlaat installasie"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Is dit korrek?"
-
-#: ugtk2.pm:968
-#, fuzzy, c-format
-msgid "No file chosen"
-msgstr "bestands-kieser"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr ""
-
-#: ugtk2.pm:972
-#, fuzzy, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Tuisgids nie beskikbaar nie."
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such directory"
-msgstr "Nie 'n gids nie"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "Nee soos lêer"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Maak boom oop"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Maak boom toe"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Skakel tussen plat- en groepsortering"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s is nie geïnstalleer nie\n"
-"Klik \"Volgende\" om te installeer of \"Kanseleer\" om te stop"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Installasie het gefaal!"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "Aantal logiese verlengings: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "U stelsel het min hulpbronne beskikbaar. U mag dalk probleme\n"
-#~ "ondervind met die installering\n"
-#~ "van Mandriva Linux. In so 'n geval probeer eerder die teksinstallasie.\n"
-#~ "Daarvoor moet u\n"
-#~ "'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die\n"
-#~ "instruksielyn intik."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr "Kontak Mandriva Linux se webwerf vir 'n lys van spieëlwebplekke...."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Mandriva Linux Installasie %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "WAARSKUWING: Die toestel is alreeds opgestel om aan die Internet "
-#~ "konnekteer.\n"
-#~ "U kan die toestel net so aanvaar.\n"
-#~ "Veranderinge aan onderstaande velde sal hierdie\n"
-#~ "konfigurasie oorskryf."
-
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Dinamiese IP-adres poel:"
-
-#~ msgid "hd"
-#~ msgstr "hd"
-
-#~ msgid "tape"
-#~ msgstr "band"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "Eksterne WebDAV werf alteeds gesinchroniseer!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "WebDAV oordrag-probleme!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr "Rugsteunkwota oorskry! %d MB gebruik vs %d MB eenkant gesit."
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Maksimum grootte\n"
-#~ "toegelaat vir Drakbackup (MB)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t -Netwerk deur webdav.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Gebruik grafiese selflaai"
-
-#~ msgid "first step creation"
-#~ msgstr "eertste stap skepping"
-
-#~ msgid "choose image file"
-#~ msgstr "kies grafika-lêer"
-
-#~ msgid "Browse"
-#~ msgstr "Blaai"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Konfigureer selflaai-splatskerm beeld"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "die kleur van die vorderingbalk"
-
-#~ msgid "Preview"
-#~ msgstr "Voorskou"
-
-#~ msgid "Choose color"
-#~ msgstr "Kies 'n kleur"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "Hou kernel-boodskappe stil by verstek"
-
-#~ msgid "Notice"
-#~ msgstr "Aandag"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "Hierdie tema het nie huidiglik 'n selflaai-splatskerm in %s nie!"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "U moet eers 'n beeldlêer kies!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Berei voorskou voor ..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "%s Selflaai-splatskerm (%s) voorskou"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Geen disketaandrywer beskikbaar nie"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Jugoslaavs (latynse uitleg)"
-
-#~ msgid "No network card"
-#~ msgstr "Geen netwerkkaart nie"
-
-#, fuzzy
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "Ssh identiteit alreeds bekom"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "U het geen lettertipe gekies nie"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "Geen blaaier beskikbaar! Installeer asseblief een"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "Geen blaaier is op u rekenaar geïnstalleer. Installeer asseblief een "
-#~ "indien u die hulp-stelsel wil deurblaai"
-
-#~ msgid "Checking device and configuring HPOJ..."
-#~ msgstr "Bekyk die toestel en konfigureer HPOJ ..."
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Plaas 'n disket in die aandrywer.\n"
-#~ "Alle data daarop sal vernietig word."
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
-
-#~ msgid "This floppy is not FAT formatted"
-#~ msgstr "Hierdie floppie is nie in FAT-formaat nie"
-
-#~ msgid ""
-#~ "To use this saved packages selection, boot installation with ``linux "
-#~ "defcfg=floppy''"
-#~ msgstr ""
-#~ "Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
-#~ "\"linux defcfg=floppy\""
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Laai/Stoor op disket"
-
-#~ msgid ""
-#~ "Please choose load or save package selection on floppy.\n"
-#~ "The format is the same as auto_install generated floppies."
-#~ msgstr ""
-#~ "Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-#~ "Die formaat is dieselfde as outoinstallasie-genereerde floppies."
-
-#~ msgid "Load from floppy"
-#~ msgstr "Laai vanaf floppie"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Stoor op floppie"
-
-#~ msgid "Package selection"
-#~ msgstr "Pakketkeuse"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "Oplaai vanaf floppie"
-
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
-
-#~ msgid "Installing HPOJ package..."
-#~ msgstr "Installeer HPOJ pakket..."
-
-#~ msgid "Installing HPLIP package..."
-#~ msgstr "Installeer HPLIP pakket..."
-
-#~ msgid "Checking device and configuring HPLIP..."
-#~ msgstr "Bekyk die toestel en konfigureer HPLIP..."
-
-#~ msgid "multi-function device on parallel port #%s"
-#~ msgstr "multi-funksionele toestel op parallele poort #%s"
-
-#~ msgid "multi-function device on a parallel port"
-#~ msgstr "multi-funksionele toestel op 'n parallelle poort"
-
-#~ msgid "multi-function device on USB"
-#~ msgstr "multi-funksionele toestel op USB"
-
-#~ msgid "multi-function device on HP JetDirect"
-#~ msgstr "multi-funksionele toestel op 'HP JetDirect'"
-
-#~ msgid "multi-function device"
-#~ msgstr "multi-funksionele-toestel"
-
-#~ msgid "printing to %s"
-#~ msgstr "drukwerk gestuur na %s"
-
-#~ msgid "using command %s"
-#~ msgstr "gebruik opdrag %s"
-
-#~ msgid "Application:"
-#~ msgstr "Applikasie:"
-
-#~ msgid "Release: "
-#~ msgstr "Vrystelling: "
-
-#~ msgid "Summary: "
-#~ msgstr "Opsomming: "
-
-#~ msgid "Bug Description/System Information"
-#~ msgstr "Gogga-beskrywing/Stelsel se inligting"
-
-#~ msgid "YOUR TEXT HERE"
-#~ msgstr "U TEKS HIER"
-
-#~ msgid "Submit kernel version"
-#~ msgstr "Dien kernel se weergawe in"
-
-#~ msgid "Submit cpuinfo"
-#~ msgstr "Dien 'cpuinfo' in"
-
-#~ msgid "Submit lspci"
-#~ msgstr "Dien 'lspci' in"
-
-#~ msgid "NOT FOUND"
-#~ msgstr "NIE GEVIND NIE"
-
-#~ msgid "connecting to %s..."
-#~ msgstr "konnekteer aan %s ..."
-
-#~ msgid "Please enter a package name."
-#~ msgstr "Voorsien asseblief 'n pakketnaam."
-
-#~ msgid "Please enter summary text."
-#~ msgstr "Voorsien asseblief 'n opsomming."
-
-#~ msgid "Loading printer configuration... Please wait"
-#~ msgstr "Laai tans die drukkerkonfigurasie.... Net 'n oomblik asb"
-
-#~ msgid "Root password"
-#~ msgstr "Kies 'root' se wagwoord"
-
-#~ msgid "Do you want to recover your system?"
-#~ msgstr "Wil u die stelsel herstel?"
-
-#~ msgid "Samba server"
-#~ msgstr "Samba-bediener"
-
-#~ msgid "Move"
-#~ msgstr "Skuif"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "Na watter skyf wil u skuif?"
-
-#~ msgid "Sector"
-#~ msgstr "Sektor"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "Na watter sektor wil u skuif?"
-
-#~ msgid "Moving"
-#~ msgstr "Verskuif"
-
-#~ msgid "Moving partition..."
-#~ msgstr "Partisie word verskuif..."
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "Fout om %s in skryfmodus te open: %s"
-
-#~ msgid ""
-#~ "This is HardDrake, a Mandriva Linux hardware configuration tool.\n"
-#~ "<span foreground=\"royalblue3\">Version:</span> %s\n"
-#~ "<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-#~ "tvignaud@mandriva.com&gt;\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Hierdie is HardDrake,'n Mandriva Linux program vir "
-#~ "hardewarekonfigurasie.\n"
-#~ "<span foreground=\"royalblue3\">Weergawe:</span> %s\n"
-#~ "<span foreground=\"royalblue3\">Skrywer</span> Thierry Vignaud &lt;"
-#~ "tvignaud@mandriva.com&gt;\n"
-#~ "\n"
-
-#~ msgid "OK"
-#~ msgstr "OK"
-
-#~ msgid "NO"
-#~ msgstr "NEE"
-
-#~ msgid "YES"
-#~ msgstr "JA"
-
-#~ msgid ""
-#~ "The following options can be set to customize your\n"
-#~ "system security. If you need an explanation, look at the help tooltip.\n"
-#~ msgstr ""
-#~ "Die volgende opsies kan gestel word om u rekenaar-sekuriteit\n"
-#~ "te verander. Indien u 'n verduideliking soek, kyk na die gereedskap-"
-#~ "wenke.\n"
-
-#~ msgid "The %s is not known by this version of Scannerdrake."
-#~ msgstr "Die %s is onbekend aan hierdie weergawe van Scannerdrake."
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Tseggies (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Duits"
-
-#~ msgid "Dvorak"
-#~ msgstr "Dvorak"
-
-#~ msgid "Spanish"
-#~ msgstr "Spaans"
-
-#~ msgid "Finnish"
-#~ msgstr "Finnies"
-
-#~ msgid "French"
-#~ msgstr "Fraans"
-
-#~ msgid "Norwegian"
-#~ msgstr "Norweegs"
-
-#~ msgid "Polish"
-#~ msgstr "Pools"
-
-#~ msgid "Russian"
-#~ msgstr "Russies"
-
-#~ msgid "Swedish"
-#~ msgstr "Sweeds"
-
-#~ msgid "Albanian"
-#~ msgstr "Albanies"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Armenies (oud)"
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Armenies (tikmasjien)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Armenies (Foneties)"
-
-#~ msgid "Arabic"
-#~ msgstr "Arabies"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Azerbaidjani (latyns)"
-
-#~ msgid "Belgian"
-#~ msgstr "Belgies"
-
-#~ msgid "Bengali"
-#~ msgstr "Bengali"
-
-#~ msgid "Bulgarian (phonetic)"
-#~ msgstr "Bulgaars (Foneties)"
-
-#~ msgid "Bulgarian (BDS)"
-#~ msgstr "Bulgaars (BDS)"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Brasiliaans (ABNT-2)"
-
-#~ msgid "Bosnian"
-#~ msgstr "Bosnies"
-
-#~ msgid "Belarusian"
-#~ msgstr "Belarussies"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "Switsers (Duitse uitleg)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "Switsers (Franse uitleg)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Tseggies (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Duits (geen dooie sleutels)"
-
-#~ msgid "Devanagari"
-#~ msgstr "Devanagari"
-
-#~ msgid "Danish"
-#~ msgstr "Deens"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Dvorak (VSA)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Dvorak (Norweegs)"
-
-#~ msgid "Dvorak (Swedish)"
-#~ msgstr "Dvorak (Sweeds)"
-
-#~ msgid "Estonian"
-#~ msgstr "Estoniaans"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Georgies (Russiese uitleg)"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Georgies (Latynse uitleg)"
-
-#~ msgid "Greek"
-#~ msgstr "Grieks"
-
-#~ msgid "Greek (polytonic)"
-#~ msgstr "Grieks (polytonies)"
-
-#~ msgid "Gujarati"
-#~ msgstr "Gujarati"
-
-#~ msgid "Gurmukhi"
-#~ msgstr "Gurmukhi"
-
-#~ msgid "Hungarian"
-#~ msgstr "Hongaars"
-
-#~ msgid "Croatian"
-#~ msgstr "Kroaties"
-
-#~ msgid "Irish"
-#~ msgstr "Iers"
-
-#~ msgid "Israeli"
-#~ msgstr "Israelies"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Israelies (Foneties)"
-
-#~ msgid "Iranian"
-#~ msgstr "Iranies"
-
-#~ msgid "Icelandic"
-#~ msgstr "Yslandies"
-
-#~ msgid "Italian"
-#~ msgstr "Italiaans"
-
-#~ msgid "Inuktitut"
-#~ msgstr "Inuktitut"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Japanees 106 sleutels"
-
-#~ msgid "Kannada"
-#~ msgstr "Kanada"
-
-#~ msgid "Korean keyboard"
-#~ msgstr "Koreaanse sleutelbord"
-
-#~ msgid "Latin American"
-#~ msgstr "Latyns-Amerikaans"
-
-#~ msgid "Laotian"
-#~ msgstr "Laoties"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Lituanies AZERTY (oud)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Lituanies AZERTY (nuut)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Lituanies \"nommerry\" QWERTY"
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Lituanies \"foneties\" QWERTY"
-
-#~ msgid "Latvian"
-#~ msgstr "Lets"
-
-#~ msgid "Malayalam"
-#~ msgstr "Malabaars"
-
-#~ msgid "Macedonian"
-#~ msgstr "Masedonies"
-
-#~ msgid "Myanmar (Burmese)"
-#~ msgstr "Myanmar (Burmese)"
-
-#~ msgid "Mongolian (cyrillic)"
-#~ msgstr "Mongools (cyrillic)"
-
-#~ msgid "Maltese (UK)"
-#~ msgstr "Maltese (UK)"
-
-#~ msgid "Maltese (US)"
-#~ msgstr "Maltees (VSA)"
-
-#~ msgid "Dutch"
-#~ msgstr "Nederlands"
-
-#~ msgid "Oriya"
-#~ msgstr "Oriya"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Pools (QWERTY uitleg)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Pools (QWERTZ uitleg)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Portugees"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Kanadees (Quebec)"
-
-#~ msgid "Romanian (qwertz)"
-#~ msgstr "Romanies (QWERTZ)"
-
-#~ msgid "Romanian (qwerty)"
-#~ msgstr "Romanies (QWERTY)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Russies (Foneties)"
-
-#~ msgid "Saami (norwegian)"
-#~ msgstr "Saami (noorweegs)"
-
-#~ msgid "Saami (swedish/finnish)"
-#~ msgstr "Saami (sweeds/fins)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Sloveens"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Slovaaks (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Slovaaks (QWERTY)"
-
-#~ msgid "Serbian (cyrillic)"
-#~ msgstr "Serwies (Kirillies)"
-
-#~ msgid "Syriac"
-#~ msgstr "Siries"
-
-#~ msgid "Syriac (phonetic)"
-#~ msgstr "Siries (Foneties)"
-
-#~ msgid "Telugu"
-#~ msgstr "Telugu"
-
-#~ msgid "Tamil (ISCII-layout)"
-#~ msgstr "Tamil (ISCII-layout)"
-
-#~ msgid "Tamil (Typewriter-layout)"
-#~ msgstr "Tamil (Tikmasjien-uitleg)"
-
-#~ msgid "Thai keyboard"
-#~ msgstr "Thai sleutelbord"
-
-#~ msgid "Tajik keyboard"
-#~ msgstr "Tajik sleutelbord"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Turks (tradisionele \"F\" model)"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Turks (moderne \"Q\" model)"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Ukranies"
-
-#~ msgid "Uzbek (cyrillic)"
-#~ msgstr "Uzbek (Kirillies)"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Viëtnamees \"nommerry\" QWERTY"
-
-#~ msgid "Yugoslavian (latin)"
-#~ msgstr "Jugoslaavs (latynse uitleg)"
-
-#~ msgid "No devices found"
-#~ msgstr "Geen toestelle gevind nie"
-
-#~ msgid ""
-#~ "You do not have any configured Internet connection.\n"
-#~ "Please run \"Internet access\" in control center."
-#~ msgstr ""
-#~ "U het nie 'n Internetkonneksie nie.\n"
-#~ "Loods asseblief \"Internet access\" in die \"control center\"."
-
-#~ msgid "Enable multiple profiles"
-#~ msgstr "Gebruik multiprofiele"
-
-#~ msgid ""
-#~ "You now have the opportunity to download updated packages. These "
-#~ "packages\n"
-#~ "have been updated after the distribution was released. They may\n"
-#~ "contain security or bug fixes.\n"
-#~ "\n"
-#~ "To download these packages, you will need to have a working Internet \n"
-#~ "connection.\n"
-#~ "\n"
-#~ "Do you want to install the updates ?"
-#~ msgstr ""
-#~ "U het nou 'n geleentheid om opgedateerde pakkette af te laai.Hierdie "
-#~ "pakkette is opgedateer na die distribusie vrygestel is.\n"
-#~ "Hulle mag moontlike sekuriteits-probleme en goggas regstel.\n"
-#~ "\n"
-#~ "Sou u hulle wil aflaai, benodig u 'n werkende Internetkonneksie.\n"
-#~ "\n"
-#~ "Wil u dit nou installeer?"
-
-#~ msgid "Installing bootloader"
-#~ msgstr "Herlaaistelsel-installasie"
-
-#~ msgid ""
-#~ "You may now provide options to module %s.\n"
-#~ "Options are in format ``name=value name2=value2...''.\n"
-#~ "For instance, ``io=0x300 irq=7''"
-#~ msgstr ""
-#~ "U kan nou die opsies voorsien vir module %s.\n"
-#~ "Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-#~ "Bv. ``io=0x300 irq-7''"
-
-#~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
-#~ "interface and to read back quality of link information for each of "
-#~ "those.\n"
-#~ "\n"
-#~ "This information is the same as the one available in /proc/net/wireless:\n"
-#~ "quality of the link, signal strength and noise level.\n"
-#~ "\n"
-#~ "See iwpspy(8) man page for further information."
-#~ msgstr ""
-#~ "Iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
-#~ "netwerk asook om die gehalte van elke koppeling van elk te lees.\n"
-#~ "\n"
-#~ "Hierdie inligting kan ook bekom word in /proc/net/wireless :\n"
-#~ "gehalte van die koppeling, seinsterkte, en geraasvlakke.\n"
-#~ "\n"
-#~ "Raadpleeg die iwpspy(8) vir verdere inligting."
-
-#~ msgid "Configuring printer..."
-#~ msgstr "Konfigureer drukker ..."
-
-#~ msgid "Configuring applications..."
-#~ msgstr "Konfigureer applikasies...."
-
-#~ msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Voeg hierdie drukker by Star Office/OpenOffice.org/GIMP"
-
-#~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr ""
-#~ "Verwyder hierdie drukker uit die Star Office/OpenOffice.org/GIMP programme"
-
-#~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Voeg drukker by Star Office/OpenOffice.org/GIMP"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/"
-#~ "GIMP."
-#~ msgstr ""
-#~ "Drukker \"%s\" is korrek bygevoeg by Star Office/OpenOffice.org/GIMP."
-
-#~ msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-#~ msgstr "Kon nie drukker \"%s\" by Star Office/OpenOffice.org/GIMP voeg nie."
-
-#~ msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Verwyder drukker uit Star Office/OpenOffice.org/GIMP"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully removed from Star Office/OpenOffice."
-#~ "org/GIMP."
-#~ msgstr ""
-#~ "Die drukker \"%s\" is suksesvol uit Star Office/OpenOffice.org/GIMP "
-#~ "verwyder"
-
-#~ msgid ""
-#~ "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Probleme om drukker \"%s\" uit Star Office/OpenOffice.org/GIMP te verwyder"
-
-#~ msgid "<b>Congratulations for choosing Mandriva Linux!</b>"
-#~ msgstr "<b>Veels Geluk met u puik keuse van Mandriva Linux! ;-)</b>"
-
-#~ msgid ""
-#~ "We would like to thank everyone who participated in the development of "
-#~ "this latest release."
-#~ msgstr ""
-#~ "Ons wil graag almal bedank (in besonder die Suid-Afrikaners) wat so hard "
-#~ "gewerk het om hierdie vrystelling moontlik te maak."
-
-#~ msgid "<b>Discovery</b>"
-#~ msgstr "<b>Discovery</b>"
-
-#~ msgid ""
-#~ "The menu is task-oriented, with a single selected application per task."
-#~ msgstr "Die kiesklys is opdrag-georïenteerd met 'n enlkele program per taak"
-
-#~ msgid ""
-#~ "The powerful Open Source graphical desktop environment KDE is the desktop "
-#~ "of choice for the Discovery Pack."
-#~ msgstr ""
-#~ "Die kragtige Oopbron grafiese werksomgewing van KDE is die primere keuse "
-#~ "vir die Discovery-pak."
-
-#~ msgid "<b>OpenOffice.org</b>: The complete Linux office suite."
-#~ msgstr "<b>OpenOffice.org</b>: Alles en nog meer."
-
-#~ msgid ""
-#~ "<b>WRITER</b> is a powerful word processor for creating all types of text "
-#~ "documents. Documents may include images, diagrams and tables."
-#~ msgstr ""
-#~ "<b>WRITER</b> is 'n kragtige woordverwerker waarmee u allerlei tipes teks "
-#~ "dokumente kan skep. Dokumente kan foto's, diagramme en tabelle bevat."
-
-#~ msgid ""
-#~ "<b>CALC</b> is a feature-packed spreadsheet which enables you to compute, "
-#~ "analyze and manage all of your data."
-#~ msgstr ""
-#~ "<b>CALC</b>is 'n spreiblad wat gepak is met al die nodige krag om al u "
-#~ "data te bestuur en te analiseer."
-
-#~ msgid ""
-#~ "<b>IMPRESS</b> is the fastest, most powerful way to create effective "
-#~ "multimedia presentations."
-#~ msgstr ""
-#~ "<b>IMPRESS</b> is die vinnigste, en kragtigste manier om multimedia "
-#~ "voorleggings te skep, daardie wat u kolegas sal jaloers maak."
-
-#~ msgid ""
-#~ "<b>DRAW</b> will produce everything from simple diagrams to dynamic 3D "
-#~ "illustrations."
-#~ msgstr ""
-#~ "<b>DRAW</b> Hiermee kan u eenvoudige diagramme optrek, maar is ook geskik "
-#~ "vir 3D sketse."
-
-#~ msgid "<b>Surf The Internet</b>"
-#~ msgstr "<b>Rits op die Internet</b>"
-
-#~ msgid "Discover the new integrated personal information suite KDE Kontact."
-#~ msgstr ""
-#~ "Ontdek die nuwe geintegreerde persoonlike inligting suite - KDE Kontact"
-
-#~ msgid ""
-#~ "More than just a full-featured email client, <b>Kontact</b> also includes "
-#~ "an address book, a calendar and scheduling program, plus a tool for "
-#~ "taking notes!"
-#~ msgstr ""
-#~ "En u het net 'n e-pos program verwag, nee, nee! <b>Kontact</b> sluit ook "
-#~ "'n adresboek, kalender en dagboek program in, o, en moet nie vergeet van "
-#~ "die notaboekkie nie!"
-
-#~ msgid "You can also:"
-#~ msgstr "U kan ook:"
-
-#~ msgid "\t* browse the Web"
-#~ msgstr "\t - rits op die Internet"
-
-#~ msgid "\t* chat"
-#~ msgstr "\t* Klets"
-
-#~ msgid "\t* organize a video-conference"
-#~ msgstr "\t Video konferensies reel"
-
-#~ msgid "\t* create your own Web site"
-#~ msgstr "\t-U eie webwef skep"
-
-#~ msgid "<b>Multimedia</b>: Software for every need!"
-#~ msgstr "<b>Multimedia</b>: Sagtware vir elke behoefde!"
-
-#~ msgid "Listen to audio CDs with <b>KsCD</b>."
-#~ msgstr "Luister na musiek CDs deur <b>KsCD</b>."
-
-#~ msgid "Listen to music files and watch videos with <b>Totem</b>."
-#~ msgstr "Luister na musieklêers en kyk na videos deur<b>Totem</b>."
-
-#~ msgid ""
-#~ "View and edit images and photos with <b>GQview</b> and <b>The Gimp!</b>"
-#~ msgstr ""
-#~ "Bekyk en redigeer foto's en grafika deur <b>GQview</b>en<b>The Gimp!</b>"
-
-#~ msgid "Become a <b>Mandriva Club</b> member!"
-#~ msgstr "Sluit aan by die <b><Mandriva Club!</b>"
-
-#~ msgid "\t* Full access to commercial applications"
-#~ msgstr "\t* Volle toegang na komersiele sagteware"
-
-#~ msgid ""
-#~ "\t* Special download mirror list exclusively for Mandriva Club Members"
-#~ msgstr ""
-#~ "\t* Spesiale spieel bedieners wat uitsluitlik vir \"Mandriva Club\" se "
-#~ "lede is"
-
-#~ msgid "\t* Voting for software to put in Mandriva Linux"
-#~ msgstr ""
-#~ "\t* Stemreg om te kan se watter sagteware u in Mandriva Linux wil sien"
-
-#~ msgid "\t* Plus much more"
-#~ msgstr "\t* Plus veel meer"
-
-#~ msgid "For more information, please visit <b>www.mandrakeclub.com</b>"
-#~ msgstr "Vir meer inligting, besoek gerus <b>www.mandrakeclub.com</b>"
-
-#~ msgid "Do you require assistance?"
-#~ msgstr "Verlang u bystand?"
-
-#~ msgid "<b>Mandriva Expert</b> is the primary source for technical support."
-#~ msgstr "<b>Mandriva Expert</b> is die hoofbron van tegniese bystand."
-
-#~ msgid ""
-#~ "If you have Linux questions, subscribe to Mandriva Expert at <b>www."
-#~ "mandrivaexpert.com</b>"
-#~ msgstr ""
-#~ "Sou u enige Linux tipe vrae het, sluit aan by Mandriva Expert <b>www. "
-#~ "mandrivaexpert.com</b>"
-
-#~ msgid ""
-#~ "If you would like to get involved, please subscribe to the \"Cooker\" "
-#~ "mailing list by visiting <b>mandrake-linux.com/cooker</b>"
-#~ msgstr ""
-#~ "Sou u graag betrokke wil raak, kan u gerus inteken by die \"Cooker\" "
-#~ "eposlys deur <b>mandrake-linux.com/cooker</b> te besoek"
-
-#~ msgid ""
-#~ "To learn more about our dynamic community, please visit <b>www.mandrake-"
-#~ "linux.com</b>!"
-#~ msgstr ""
-#~ "Om meer te wete te kom oor ons dinamiese gemeenskap, besoek <b>www."
-#~ "mandrake- linux.com</b>!"
-
-#~ msgid ""
-#~ "Mandriva Linux includes the famous graphical desktops KDE and GNOME, plus "
-#~ "the latest versions of the most popular Open Source applications."
-#~ msgstr ""
-#~ "Mandriva Linux sluit die bekende KDEen GNOME grafiese werkskerms, asook "
-#~ "die nuutste weergawes van die mees gewilde Oopbron programme in."
-
-#~ msgid ""
-#~ "Mandriva Linux is widely known as the most user-friendly and the easiest "
-#~ "to install and easy to use Linux distribution."
-#~ msgstr ""
-#~ "Mandriva Linux word deur meeste mense as die gebruikervriendelikste Linux "
-#~ "beskou. Dit is maklik om te installeer en maklik om te gebruik."
-
-#~ msgid ""
-#~ "\t* Find out Mandriva Linux on a bootable CD with <b>Mandrakemove</b>"
-#~ msgstr ""
-#~ "\t* Vind uit oor Mandriva Linux op 'n selflaai CD - <b>Mandrakemove</b>"
-
-#~ msgid ""
-#~ "\t* If you use Linux mostly for Office, Internet and Multimedia tasks, "
-#~ "<b>Discovery</b> perfectly meets your needs"
-#~ msgstr ""
-#~ "\t* Indien u Linux meesal in die Kantoor, vir Internet en Multimedia "
-#~ "gebruik, kan ons <b>Discovery</b> aanbeveel"
-
-#~ msgid ""
-#~ "\t* If you appreciate the largest selection of software including "
-#~ "powerful development tools, <b>PowerPack</b> is for you"
-#~ msgstr ""
-#~ "\t* Verkies u 'n hengske keuse van sagteware wat kragtige ontwikkelings "
-#~ "sagteware insluit, probeer dan gerus <b>PowerPack!</b>"
-
-#~ msgid ""
-#~ "\t* If you require a full-featured Linux solution customized for small to "
-#~ "medium-sized networks, choose <b>PowerPack+</b>"
-#~ msgstr ""
-#~ "\t Indien u al die fluitjies en klokkies verlang, veral vir klein to "
-#~ "medium grote netweke, kies dan <b>PowerPack+</b>"
-
-#~ msgid "Find out also our <b>Business Solutions</b>!"
-#~ msgstr "Vind gerus meer uit oor ons <b>Business Solutions</b>!"
-
-#~ msgid ""
-#~ "<b>Corporate Server</b>: the ideal solution for entreprises. It is a "
-#~ "complete \"all-in-one\" solution that includes everything needed to "
-#~ "rapidly deploy world-class Linux server applications."
-#~ msgstr ""
-#~ "<b>Corporate Server</b>: Die ideale oplossing vir groot firmas. 'n "
-#~ "Kompleet \"alles in een\" oplossing wat gebruik kan word om blitsig "
-#~ "verskeidenheid bedieners op te stel."
-
-#~ msgid ""
-#~ "<b>Multi Network Firewall</b>: based on Linux 2.4 \"kernel secure\" to "
-#~ "provide multi-VPN as well as multi-DMZ functionalities. It is the perfect "
-#~ "high performance security solution."
-#~ msgstr ""
-#~ "<b>Multi Network Firewall</b>: gebaseer op die Linux 2.4 \"kernel secure"
-#~ "\" om in multi-VPN asook multi-DMZ te voorsien. 'n Perfekte rateltaai "
-#~ "sekuriteits- oplossing."
-
-#~ msgid ""
-#~ "<b>MandrakeClustering</b>: the power and speed of a Linux cluster "
-#~ "combined with the stability and easy-of-use of the world-famous Mandriva "
-#~ "Linux distribution. A unique blend for incomparable HPC performance."
-#~ msgstr ""
-#~ "<b>MandrakeClustering</b>: die krag en spoed van 'n Linux-trosrekenaar "
-#~ "gekombineer met die stabiliteit en gebruikersvriendelikheid van Mandrake "
-#~ "Linux. Voorwaar 'n uitblinker in HPC werkverrigting"
-
-#~ msgid ""
-#~ "Find out also support incidents if you have any problems, from standard "
-#~ "to professional support, from 1 to 50 incidents, take the one which meets "
-#~ "perfectly your needs!"
-#~ msgstr ""
-#~ "Ons voorsien ook ondersteuning per probleem. u kan 'n aantal gevalle "
-#~ "aankoop waar ons dan 'n probleem per geval hanteer. daar is "
-#~ "verskeidenheid hoveelhede vir elke behoefde!"
-
-#~ msgid "<b>Become a Mandriva Club member!</b>"
-#~ msgstr "<b>Word 'n lid van die Mandriva Club!</b>"
-
-#~ msgid "<b>Do you require assistance?</b>"
-#~ msgstr "<b>Benodig u bystand?</b>"
-
-#~ msgid "This is the Mandriva Linux <b>Download version</b>."
-#~ msgstr "Hierdie is die Mandriva Linux <b>Download weergawe</b>."
-
-#~ msgid ""
-#~ "The free download version does not include commercial software, and "
-#~ "therefore may not work with certain modems (such as some ADSL and RTC) "
-#~ "and video cards (such as ATI® and NVIDIA®)."
-#~ msgstr ""
-#~ "Die Weergawe wat u kan aflaai sluit nie komersiele sagteware in nie. Om "
-#~ "hierdie rede sal sekere modems (sekere ADSL en RTC) asook sekere grafika-"
-#~ "kaarte (soos ATI® en NVIDIA®)nie ten volle werk nie."
-
-#~ msgid "<b>PowerPack+</b>"
-#~ msgstr "<b>PowerPack+</b>"
-
-#~ msgid ""
-#~ "PowerPack+ is a full-featured Linux solution for small to medium-sized "
-#~ "networks. PowerPack+ increases the value of the standard PowerPack by "
-#~ "adding a comprehensive selection of world-class server applications."
-#~ msgstr ""
-#~ "PowerPack+ is 'n volledige oplossing vir klein tot medium grootte "
-#~ "netwerke. PowerPack+ verhoog die waarde van die standaard PowerPack deur "
-#~ "'n volledige keuse wereldklas bediener aplikasies in te sluit."
-
-#~ msgid ""
-#~ "It is the only Mandriva Linux product that includes the groupware "
-#~ "solution."
-#~ msgstr ""
-#~ "Dit is die enigste Mandriva Linux produk wat die \"groupware\" oplossing "
-#~ "bevat."
-
-#~ msgid ""
-#~ "When you log into your Mandriva Linux system for the first time, you can "
-#~ "choose between several popular graphical desktops environments, "
-#~ "including: KDE, GNOME, WindowMaker, IceWM, and others."
-#~ msgstr ""
-#~ "Sodra u die eerste keer inteken op u Mandriva Linux rekenaar, het u 'n "
-#~ "keuse watter grafiese werksomgewing om te gebruik. Keuses sluit KDE, "
-#~ "GNOME, WindowMaker, IceWM, en ander in."
-
-#~ msgid ""
-#~ "In the Mandriva Linux menu you will find easy-to-use applications for all "
-#~ "of your tasks:"
-#~ msgstr ""
-#~ "Die kieslys in Mandriva Linux het gebruikersvriendelike programme vir "
-#~ "alle behoefdes:"
-
-#~ msgid ""
-#~ "\t* Listen to audio CDs and music files with <b>KsCD</b> and <b>Totem</b>"
-#~ msgstr ""
-#~ "\t* Luister na musiek CDs asook Musiek-lêers met <b>KsCD</b> en <b>Totem</"
-#~ "b>"
-
-#~ msgid ""
-#~ "PowerPack+ includes everything needed for developing and creating your "
-#~ "own software, including:"
-#~ msgstr ""
-#~ "PowerPack+ sluit alles in om u eie sagteware te kan skep en te onwikkel:"
-
-#~ msgid ""
-#~ "\t* <b>Kdevelop</b>: a full featured, easy to use Integrated Development "
-#~ "Environment for C++ programming"
-#~ msgstr ""
-#~ "\t* <b>Kdevelop</b>: 'n volledige, maklik om te gebruik IDE om C++ "
-#~ "programme te skep."
-
-#~ msgid "\t* <b>GCC</b>: the GNU Compiler Collection"
-#~ msgstr "\t* <b>GCC</b>: Die \"GNU Compiler Collection\""
-
-#~ msgid "\t* <b>GDB</b>: the GNU Project debugger"
-#~ msgstr "\t* <b>GDB</b>: Die \"GNU Project debugger\""
-
-#~ msgid "<b>Discover the full-featured groupware solution!</b>"
-#~ msgstr "<b>Ontdek die volledig toegeruste \"groupware\" oplossing!</b>"
-
-#~ msgid "It includes both server and client features for:"
-#~ msgstr "Dit sluit beide kliënt en bediener vir die volgende in:"
-
-#~ msgid ""
-#~ "\t* Calendar, Task List, Memos, Contacts, Meeting Request (sending and "
-#~ "receiving), Task Requests (sending and receiving)"
-#~ msgstr ""
-#~ "\t* Kalender, Opdraglyste, Memos, Kontakte, Vergaderingsversoeke (stuur "
-#~ "en ontvang), Opdradg versoeke (stuur en ontvang)"
-
-#~ msgid "\t* Address Book (server and client)"
-#~ msgstr "\t* Adresboek (kliënt en bediener)"
-
-#~ msgid ""
-#~ "Your new Mandriva Linux distribution is the result of collaborative "
-#~ "efforts between Mandriva developers and Mandriva Linux contributors "
-#~ "throughout the world."
-#~ msgstr ""
-#~ "U nuwe Mandriva Linux bedryfstelsel met al sy programme is die resultaat "
-#~ "van 'n wereldwye gemeenskap, wat Mandriva se ontwikkelaars, asook mense "
-#~ "in Sonnige Suid-Afrika insluit!"
-
-#~ msgid ""
-#~ "We would like to thank everyone who participated in the development of "
-#~ "our latest release."
-#~ msgstr ""
-#~ "Ons wil graag almal bedank (in besonder die Suid-Afrikaners) wat so hard "
-#~ "gewerk het om hierdie vrystelling moontlik te maak."
-
-#~ msgid "<b>PowerPack</b>"
-#~ msgstr "<b>PowerPack</b>"
-
-#~ msgid ""
-#~ "PowerPack includes everything needed for developing and creating your own "
-#~ "software, including:"
-#~ msgstr ""
-#~ "PowerPack+ sluit alles in om u eie sagteware te kan skep en te onwikkel:"
-
-#~ msgid "And of course the editors!"
-#~ msgstr "En natuurlik die redigeerders!"
-
-#~ msgid "Installation of %s failed. The following error occurred:"
-#~ msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
-
-#~ msgid ""
-#~ "We need to install ntp package\n"
-#~ " to enable Network Time Protocol\n"
-#~ "\n"
-#~ "Do you want to install ntp ?"
-#~ msgstr ""
-#~ "Ons moet die ntp-pakket installeer\n"
-#~ "om die NTP protokol te aktiveer\n"
-#~ "\n"
-#~ "Wil u ntp installeer?"
-
-#~ msgid ""
-#~ "The setup of a VPN connection has already been done.\n"
-#~ "\n"
-#~ "It's currently enabled.\n"
-#~ "\n"
-#~ "What would you like to do ?"
-#~ msgstr ""
-#~ "Die opstelling van die VPN-konneksie is alreeds gedoen.\n"
-#~ "\n"
-#~ "Dis tans aktief.\n"
-#~ "\n"
-#~ "Wat wil u doen?"
-
-#~ msgid ""
-#~ "The setup of a VPN connection has already been done.\n"
-#~ "\n"
-#~ "It's currently disabled.\n"
-#~ "\n"
-#~ "What would you like to do ?"
-#~ msgstr ""
-#~ "Die opstelling van die VPN-konnkesiedeling is alreeds gedoen.\n"
-#~ "\n"
-#~ "Dis tans gedeaktiveer.\n"
-#~ "\n"
-#~ "Wat wil u doen?"
-
-#~ msgid "Set of tools to read and send mail and news and to browse the Web"
-#~ msgstr ""
-#~ "Programme vir die lees en stuur van e-pos, netnuus en op die Web te rits."
-
-#~ msgid ""
-#~ "Before continuing, you should carefully read the terms of the license. "
-#~ "It\n"
-#~ "covers the entire Mandriva Linux distribution. If you do agree with all "
-#~ "the\n"
-#~ "terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n"
-#~ "will reboot your computer."
-#~ msgstr ""
-#~ "Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-#~ "die hele Mandriva Linux distribusie. Indien u saamstem met al die\n"
-#~ "voorwaardes daarin, merk die \"%s\" boksie. Indien nie, kan u op die\n"
-#~ "\"%s\" knoppie druk om teherlaai."
-
-#~ msgid ""
-#~ "GNU/Linux is a multi-user system, meaning each user may have their own\n"
-#~ "preferences, their own files and so on. You can read the ``Starter "
-#~ "Guide''\n"
-#~ "to learn more about multi-user systems. But unlike \"root\", who is the\n"
-#~ "system administrator, the users you add at this point will not be\n"
-#~ "authorized to change anything except their own files and their own\n"
-#~ "configurations, protecting the system from unintentional or malicious\n"
-#~ "changes that impact on the system as a whole. You will have to create at\n"
-#~ "least one regular user for yourself -- this is the account which you "
-#~ "should\n"
-#~ "use for routine, day-to-day use. Although it is very easy to log in as\n"
-#~ "\"root\" to do anything and everything, it may also be very dangerous! A\n"
-#~ "very simple mistake could mean that your system will not work any more. "
-#~ "If\n"
-#~ "you make a serious mistake as a regular user, the worst that will happen "
-#~ "is\n"
-#~ "that you will lose some information, but not affect the entire system.\n"
-#~ "\n"
-#~ "The first field asks you for a real name. Of course, this is not "
-#~ "mandatory\n"
-#~ "-- you can actually enter whatever you like. DrakX will use the first "
-#~ "word\n"
-#~ "you typed in this field and copy it to the \"%s\" field, which is the "
-#~ "name\n"
-#~ "this user will enter to log onto the system. If you like, you may "
-#~ "override\n"
-#~ "the default and change the user name. The next step is to enter a "
-#~ "password.\n"
-#~ "From a security point of view, a non-privileged (regular) user password "
-#~ "is\n"
-#~ "not as crucial as the \"root\" password, but that is no reason to "
-#~ "neglect\n"
-#~ "it by making it blank or too simple: after all, your files could be the\n"
-#~ "ones at risk.\n"
-#~ "\n"
-#~ "Once you click on \"%s\", you can add other users. Add a user for each "
-#~ "one\n"
-#~ "of your friends: your father or your sister, for example. Click \"%s\" "
-#~ "when\n"
-#~ "you have finished adding users.\n"
-#~ "\n"
-#~ "Clicking the \"%s\" button allows you to change the default \"shell\" "
-#~ "for\n"
-#~ "that user (bash by default).\n"
-#~ "\n"
-#~ "When you have finished adding users, you will be asked to choose a user "
-#~ "who\n"
-#~ "can automatically log into the system when the computer boots up. If you\n"
-#~ "are interested in that feature (and do not care much about local "
-#~ "security),\n"
-#~ "choose the desired user and window manager, then click \"%s\". If you "
-#~ "are\n"
-#~ "not interested in this feature, uncheck the \"%s\" box."
-#~ msgstr ""
-#~ "GNU/Linux is 'n multigebruikerstelsel, dit beteken dat elke gebruiker sy\n"
-#~ "eie voorkeure kan stel, met sy eie lêers ens. U kan meer hieroor in die\n"
-#~ "\"Starter Guide\"  lees. Andersins as 'root' (die supergebruiker) kan\n"
-#~ "gebruikers wat u hier byvoeg niks behalwe hul eie lêers en eie\n"
-#~ "konfigurasie verander nie. U moet ten minste een gewone gebruiker vir "
-#~ "uself\n"
-#~ "skep.\n"
-#~ "Hierdie gebruker is die een waaronder u moet inteken vir normale gebruik\n"
-#~ "van die rekenaar. Alhoewel dit baie gemaklik is om as 'root' in te teken "
-#~ "vir\n"
-#~ "daaglikse werk, is dit baie gevaarlik. 'n Eenvoudige fout kan moontlik u\n"
-#~ "stelsel\n"
-#~ "breek. 'n Fout wat as gewone gebruiker gemaak word, sal net daardie\n"
-#~ "gebruiker\n"
-#~ "beïnvloed en nie hele stelsel nie.\n"
-#~ "\n"
-#~ "Eers moet u, u eie naam intik. Dit is nie verpligtend nie, want u kan\n"
-#~ "eintlik\n"
-#~ "enigiets intik, as u wil. DrakX sal dan die eerste woord wat u ingetik "
-#~ "het,\n"
-#~ "in die\n"
-#~ "\"%s\" veld plaas. U kan hier verander indien u wil. Dit is die\n"
-#~ "gebruikernaam waarmee\n"
-#~ "die gebruiker op die rekenaar sal aanteken. U moet dan ook 'n wagwoord\n"
-#~ "voorsien.\n"
-#~ "'n Gewone gebruiker se wagwoord is nie so krities soos dié van die\n"
-#~ "supergebruiker\n"
-#~ "(uit 'n sekuriteitsoogpunt) nie, maar daar is geen\n"
-#~ "rede om agterlosig met u data te wees nie.\n"
-#~ "\n"
-#~ "\n"
-#~ "Indien u op \"%s\" kliek sal die gebruiker geskep word en kan u nog\n"
-#~ "gebruikers byvoeg.\n"
-#~ "U kan vir al u vriende gebruikername skep, sommer een vir pa en ma ook. \n"
-#~ "Sodra u klaar is, kliek op \"%s\".\n"
-#~ "Kliek op die \"%s\" knoppie indien u die verstek-instruksiedop vir die\n"
-#~ "gebruiker\n"
-#~ "wil verander.\n"
-#~ "Dit is bash by verstek.\n"
-#~ "\n"
-#~ "Sodra u klaar is met die skep van gebruikers, sal u gevra word om 'n\n"
-#~ "gebruiker\n"
-#~ "te kies wie outomaties sal inteken sodra Linux klaar selfgelaai het. "
-#~ "Indien\n"
-#~ "u hierdie funksie wil gebruik (en plaaslike sekuriteit tans nie vreeslik\n"
-#~ "belangrik is nie), kies asseblief die verlangde gebruiker en "
-#~ "venstermaker,\n"
-#~ "klik dan op \"%s\".\n"
-#~ "Indien u NIE hierdie funksie wil gebruik nie, sorg dat \"%s\" NIE gemerk "
-#~ "is\n"
-#~ "nie. "
-
-#~ msgid ""
-#~ "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-#~ "selected package is located on another CD-ROM, DrakX will eject the "
-#~ "current\n"
-#~ "CD and ask you to insert the correct CD as required."
-#~ msgstr ""
-#~ "Die Mandriva Linux installasie is versprei oor 'n aantal CD-ROMs.DrakX\n"
-#~ "weet wanneer 'n gekose pakket op 'n ander CD-ROM is. DrakX sal in so\n"
-#~ "geval die huidige CD uitskop en aandui watter een benodig word."
-
-#~ msgid ""
-#~ "It is now time to specify which programs you wish to install on your\n"
-#~ "system. There are thousands of packages available for Mandriva Linux, "
-#~ "and\n"
-#~ "to make it simpler to manage the packages have been placed into groups "
-#~ "of\n"
-#~ "similar applications.\n"
-#~ "\n"
-#~ "Packages are sorted into groups corresponding to a particular use of "
-#~ "your\n"
-#~ "machine. Mandriva Linux sorts packages groups in four categories. You "
-#~ "can\n"
-#~ "mix and match applications from the various categories, so a\n"
-#~ "``Workstation'' installation can still have applications from the\n"
-#~ "``Development'' category installed.\n"
-#~ "\n"
-#~ " * \"%s\": if you plan to use your machine as a workstation, select one "
-#~ "or\n"
-#~ "more of the groups that are in the workstation category.\n"
-#~ "\n"
-#~ " * \"%s\": if you plan on using your machine for programming, select the\n"
-#~ "appropriate groups from that category.\n"
-#~ "\n"
-#~ " * \"%s\": if your machine is intended to be a server, select which of "
-#~ "the\n"
-#~ "more common services you wish to install on your machine.\n"
-#~ "\n"
-#~ " * \"%s\": this is where you will choose your preferred graphical\n"
-#~ "environment. At least one must be selected if you want to have a "
-#~ "graphical\n"
-#~ "interface available.\n"
-#~ "\n"
-#~ "Moving the mouse cursor over a group name will display a short "
-#~ "explanatory\n"
-#~ "text about that group. If you unselect all groups when performing a "
-#~ "regular\n"
-#~ "installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-#~ "different options for a minimal installation:\n"
-#~ "\n"
-#~ " * \"%s\": install the minimum number of packages possible to have a\n"
-#~ "working graphical desktop.\n"
-#~ "\n"
-#~ " * \"%s\": installs the base system plus basic utilities and their\n"
-#~ "documentation. This installation is suitable for setting up a server.\n"
-#~ "\n"
-#~ " * \"%s\": will install the absolute minimum number of packages "
-#~ "necessary\n"
-#~ "to get a working Linux system. With this installation you will only have "
-#~ "a\n"
-#~ "command line interface. The total size of this installation is about 65\n"
-#~ "megabytes.\n"
-#~ "\n"
-#~ "You can check the \"%s\" box, which is useful if you are familiar with "
-#~ "the\n"
-#~ "packages being offered or if you want to have total control over what "
-#~ "will\n"
-#~ "be installed.\n"
-#~ "\n"
-#~ "If you started the installation in \"%s\" mode, you can unselect all "
-#~ "groups\n"
-#~ "to avoid installing any new package. This is useful for repairing or\n"
-#~ "updating an existing system."
-#~ msgstr ""
-#~ "Nou moet u spesifiseer watter programme u op die rekenaar wil\n"
-#~ "installeer. Daar is duisende pakkette beskikbaar vir Mandriva Linux, en\n"
-#~ "om alles meer eenvoudig te maak, is die pakkette gegroepeer onder\n"
-#~ "groepe van selfde tipe programme.\n"
-#~ "\n"
-#~ "Die groepe is so saamgestel dat dit saamval met die tipe gebruik van u\n"
-#~ "rekenaar. Mandriva Linux het vier vooraf gespesifseerde installasies\n"
-#~ "beskikbaar. Dink aan hierdie tipes as houers met verskillende pakkette.\n"
-#~ "U kan wel uit die verskillende houers, verskillende pakkette kies.\n"
-#~ "Dus kan u \"Werkstasie\" ook programme uit die \"Ontwikkeling\"\n"
-#~ "bevat.\n"
-#~ "( Amper soos die \"pick 'n mix\" by 'n Clicks of 'n winkel van u "
-#~ "keuse! )\n"
-#~ "\n"
-#~ " * \"%s\": indien u die rekenaar as 'n werkstasie wil gebruik, kies een "
-#~ "of\n"
-#~ "meer hieruit.\n"
-#~ "\n"
-#~ " * \"%s\": indien u ontwikkelling op die masjien wil doen, kan u hier\n"
-#~ "kies en keur.\n"
-#~ "\n"
-#~ " * \"%s\": mense wat 'n bediener wil opstel, hier is vir julle keuses.\n"
-#~ "\n"
-#~ " * \"%s\": Grafiese-omgewings. Indien u 'n grafiese omgewing wil\n"
-#~ "gebruik, moet u ten minste een hier kies.\n"
-#~ "\n"
-#~ "Beweeg u muis stadig oor elke groep om meer inligting daaroor te bekom.\n"
-#~ "Indien u NIKS kies nie gedurende 'n normale installasie, sal 'n venster\n"
-#~ "opspring met verskillende keuses vir hierdie minimale installasie:\n"
-#~ "\n"
-#~ " * \"%s\": installeer die minimale programme vir 'n werkende grafiese\n"
-#~ "werksomgewing.\n"
-#~ "\n"
-#~ " * \"%s\": installeer 'n basiese stelsel met basiese nutsporgramme en "
-#~ "hul\n"
-#~ "dokumentasie. Dit is geskik om 'n bediener op te stel.\n"
-#~ "\n"
-#~ " * \"%s\": sal 'n absolute minimale installasie doen, sodat u bloot 'n\n"
-#~ "werkende Linux rekenaar het. Die grootte sal so 65 megagrepe wees.\n"
-#~ "\n"
-#~ "U kan die \"%s\" blokkie merk, dit is handig indien u vertroud is met al\n"
-#~ "die beskikbare pakette, en u meer beheer verlang.\n"
-#~ "\n"
-#~ "Indien u die installasie in \"%s\"-modus begin het, kan u NIKS kies nie\n"
-#~ "om te verhoed dat nuwe pakette installeer. Baie handig wanneer u 'n\n"
-#~ "bestaande stelsel opdateeer, of herstel."
-
-#~ msgid ""
-#~ "If you told the installer that you wanted to individually select "
-#~ "packages,\n"
-#~ "it will present a tree containing all packages classified by groups and\n"
-#~ "subgroups. While browsing the tree, you can select entire groups,\n"
-#~ "subgroups, or individual packages.\n"
-#~ "\n"
-#~ "Whenever you select a package on the tree, a description appears on the\n"
-#~ "right to let you know the purpose of the package.\n"
-#~ "\n"
-#~ "!! If a server package has been selected, either because you "
-#~ "specifically\n"
-#~ "chose the individual package or because it was part of a group of "
-#~ "packages,\n"
-#~ "you will be asked to confirm that you really want those servers to be\n"
-#~ "installed. By default Mandriva Linux will automatically start any "
-#~ "installed\n"
-#~ "services at boot time. Even if they are safe and have no known issues at\n"
-#~ "the time the distribution was shipped, it is entirely possible that that\n"
-#~ "security holes were discovered after this version of Mandriva Linux was\n"
-#~ "finalized. If you do not know what a particular service is supposed to "
-#~ "do\n"
-#~ "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
-#~ "install the listed services and they will be started automatically by\n"
-#~ "default during boot. !!\n"
-#~ "\n"
-#~ "The \"%s\" option is used to disable the warning dialog which appears\n"
-#~ "whenever the installer automatically selects a package to resolve a\n"
-#~ "dependency issue. Some packages have relationships between each them "
-#~ "such\n"
-#~ "that installation of one package requires that some other program is "
-#~ "also\n"
-#~ "required to be installed. The installer can determine which packages are\n"
-#~ "required to satisfy a dependency to successfully complete the "
-#~ "installation.\n"
-#~ "\n"
-#~ "The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-#~ "package list created during a previous installation. This is useful if "
-#~ "you\n"
-#~ "have a number of machines that you wish to configure identically. "
-#~ "Clicking\n"
-#~ "on this icon will ask you to insert a floppy disk previously created at "
-#~ "the\n"
-#~ "end of another installation. See the second tip of last step on how to\n"
-#~ "create such a floppy."
-#~ msgstr ""
-#~ "Inidein u gespesifiseer het dat u individuele pakkette wil kies,\n"
-#~ "sal daar 'n boom-struktuur aan u vertoon word met al die pakkette\n"
-#~ "wat opgedeel is in groepe en sub-groepe. Soos u die deur hulle rits\n"
-#~ "kan u hele groepe of sub-groepe kies, of self individuele pakkette.\n"
-#~ "\n"
-#~ "Sodra u 'n pakket kies, sal daar 'n beskrywing aan die regterkant "
-#~ "verskyn\n"
-#~ "wat aandui waarvoor die pakket gebruik word.\n"
-#~ "\n"
-#~ "Indien u 'n diensprogram kies, of dit nou deel is van 'n groepe pakkette "
-#~ "of\n"
-#~ "'n enkel een, sal u gevra word om die installasie daarvan te bevestig.\n"
-#~ "Mandriva Linux sal by verstek alle bediener-programme afskop nadat u die\n"
-#~ "rekenaar aangeskakel het. Hierdie bediener-programme is verpak sonder\n"
-#~ "enige probleme bekend. Dit kon intussen verander het, nadat sekuriteits-"
-#~ "gate\n"
-#~ "gevind is. Indien u nie weet wat 'n diens veronderstel is om te doen nie, "
-#~ "of\n"
-#~ "waarom dit geïnstalleer word nie, klik op \"%s\". Deur op \"%s\" te klik "
-#~ "sal\n"
-#~ "die bediener-program geïnstalleer word en afskop sodra die Linux laai!!\n"
-#~ "\n"
-#~ "Die \"%s\"-opsie VERSPER die waarskuwings-dialoog wat verskyn\n"
-#~ "sodra die installeerder ander pakkette moet kies a.g.v. afhanklikhede\n"
-#~ "Afhanklikhede werk as volg: Sommige pakkette moet ander programme\n"
-#~ "installeer om korrek te funksioneer, maar hierdie programme maak soms "
-#~ "deel\n"
-#~ "uit van 'n ander pakket, dus sal die installeer-program daardie pakkette\n"
-#~ "ook installeer.\n"
-#~ "\n"
-#~ "Die klein disket-ikoon aan die lys se onderkant laat u toe om 'n lys van\n"
-#~ "pakkette van 'n vorige installeasie te laai. Dit is handig indien u 'n\n"
-#~ "aantal masjiene identies wil konfigureer. As u hierop klik, sal u gevra\n"
-#~ "word om die disket te voorsien wat aan die einde van 'n vorige\n"
-#~ "installasie geskep is. Raadpleeg die tweede wenk van die laaste stap\n"
-#~ "oor hoe mens so disket skep."
-
-#~ msgid ""
-#~ "You will now set up your Internet/network connection. If you wish to\n"
-#~ "connect your computer to the Internet or to a local network, click \"%s"
-#~ "\".\n"
-#~ "Mandriva Linux will attempt to auto-detect network devices and modems. "
-#~ "If\n"
-#~ "this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
-#~ "configure the network, or to do it later, in which case clicking the \"%s"
-#~ "\"\n"
-#~ "button will take you to the next step.\n"
-#~ "\n"
-#~ "When configuring your network, the available connections options are:\n"
-#~ "Normal modem connection, Winmodem connection, ISDN modem, ADSL "
-#~ "connection,\n"
-#~ "cable modem, and finally a simple LAN connection (Ethernet).\n"
-#~ "\n"
-#~ "We will not detail each configuration option - just make sure that you "
-#~ "have\n"
-#~ "all the parameters, such as IP address, default gateway, DNS servers, "
-#~ "etc.\n"
-#~ "from your Internet Service Provider or system administrator.\n"
-#~ "\n"
-#~ "About Winmodem Connection. Winmodems are special integrated low-end "
-#~ "modems\n"
-#~ "that require additional software to work compared to Normal modems. Some "
-#~ "of\n"
-#~ "those modems actually work under Mandriva Linux, some others do not. You\n"
-#~ "can consult the list of supported modems at LinModems.\n"
-#~ "\n"
-#~ "You can consult the ``Starter Guide'' chapter about Internet connections\n"
-#~ "for details about the configuration, or simply wait until your system is\n"
-#~ "installed and use the program described there to configure your "
-#~ "connection."
-#~ msgstr ""
-#~ "U kan nou die Internet/netwerk konneksie opstel. Indien u graag die "
-#~ "rekenaar\n"
-#~ "aan die Internet of plaaslike netwerk wil koppel, kies \"%s\".\n"
-#~ "Mandriva Linux sal poog om u netwerk toestelle en modems te outospeur.\n"
-#~ "Indien\n"
-#~ "dit onsuksesvol was, probeer waar \"%s\" nie gemerk is nie. U kan ook "
-#~ "kies\n"
-#~ "om nie \n"
-#~ "die netwerk op te stel nie, of dit selfs eers later te doen, kies dan \"%s"
-#~ "\"\n"
-#~ ", wat u na die volgende stap sal neem.\n"
-#~ "\n"
-#~ "Waneer u die netwerk opstel, is die volgende opsies tot u beskiking:\n"
-#~ "gewone modem, ISDN-modem, ADSL konneksie, kabel-modem, en ten laaste,\n"
-#~ "'n normale LAN konneksie (Ethernet).\n"
-#~ "\n"
-#~ "Ons gaan nie al die opsies bespreek nie - maak net seker dat u die "
-#~ "nodigste\n"
-#~ "inligting soos IP-adres, 'default gateway', DNS bedieners, ens.\n"
-#~ "verkry het van u ISP of administrateur.\n"
-#~ "U kan die \"Starter Guide\" se hoofstuk omtrent die Internet raadpleeg\n"
-#~ "vir besonderhede rakende die konfigurasie, of doodgewoon wag tot alles "
-#~ "klaar\n"
-#~ "geïnstalleer is en agterna die konneksie opstel."
-
-#~ msgid "Use auto detection"
-#~ msgstr "Gebruik outobespeuring"
-
-#~ msgid ""
-#~ "\"%s\": clicking on the \"%s\" button will open the printer "
-#~ "configuration\n"
-#~ "wizard. Consult the corresponding chapter of the ``Starter Guide'' for "
-#~ "more\n"
-#~ "information on how to setup a new printer. The interface presented there "
-#~ "is\n"
-#~ "similar to the one used during installation."
-#~ msgstr ""
-#~ "\"%s\": deur op die \"%s\" knoppie te klik, sal u toegang tot die "
-#~ "'printer\n"
-#~ "configuration wizard' kry. Gaan gerus die ooreenstemde hoofstuk in die\n"
-#~ "\"Starter Guide\" na vir meer inligting. Dit stem baie ooreen met die een."
-
-#~ msgid ""
-#~ "This dialog is used to choose which services you wish to start at boot\n"
-#~ "time.\n"
-#~ "\n"
-#~ "DrakX will list all the services available on the current installation.\n"
-#~ "Review each one carefully and uncheck those which are not needed at boot\n"
-#~ "time.\n"
-#~ "\n"
-#~ "A short explanatory text will be displayed about a service when it is\n"
-#~ "selected. However, if you are not sure whether a service is useful or "
-#~ "not,\n"
-#~ "it is safer to leave the default behavior.\n"
-#~ "\n"
-#~ "!! At this stage, be very careful if you intend to use your machine as a\n"
-#~ "server: you will probably not want to start any services that you do not\n"
-#~ "need. Please remember that several services can be dangerous if they are\n"
-#~ "enabled on a server. In general, select only the services you really "
-#~ "need.\n"
-#~ "!!"
-#~ msgstr ""
-#~ "U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-#~ "\n"
-#~ "Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-#~ "wat die rol van die diens verduidelik.\n"
-#~ "\n"
-#~ "Wees versigtig met hierdie stap. Indien u beplan om dié rekenaar as 'n\n"
-#~ "bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-#~ "local time according to the time zone you selected. If the clock on your\n"
-#~ "motherboard is set to local time, you may deactivate this by unselecting\n"
-#~ "\"%s\", which will let GNU/Linux know that the system clock and the\n"
-#~ "hardware clock are in the same time zone. This is useful when the "
-#~ "machine\n"
-#~ "also hosts another operating system like Windows.\n"
-#~ "\n"
-#~ "The \"%s\" option will automatically regulate the clock by connecting to "
-#~ "a\n"
-#~ "remote time server on the Internet. For this feature to work, you must "
-#~ "have\n"
-#~ "a working Internet connection. It is best to choose a time server "
-#~ "located\n"
-#~ "near you. This option actually installs a time server that can be used "
-#~ "by\n"
-#~ "other machines on your local network as well."
-#~ msgstr ""
-#~ "GNU/Linux gebruik die GMT (Greenwich Mean Time) as verwysing en verstel\n"
-#~ "dan die tyd volgens u tydsone. Dit beteken dat, in Suid-Afrika,\n"
-#~ "die tyd op die moederbord sowat twee ure \"uit\" sal wees,\n"
-#~ "indien u Johannesburg as tydsone kies. U kan GNU/Linux forseer om\n"
-#~ "die moederbord en plaaslike tyd dieselfde te hou deur NIE die \"%s\" te\n"
-#~ "merk NIE. Gebruik dit so wanneer die rekenaar\n"
-#~ "ander bedryfstelsels ook kan laai, byvoorbeeld Windows.\n"
-#~ "\n"
-#~ "Die \"%s\"-opsie sal outomaties die klok reguleer deur gebruik te maak "
-#~ "van\n"
-#~ "'n eksterne tyd-bediener op die Internet. U sal natuurlik 'n werkende\n"
-#~ "Internetkonneksie daarvoor benodig. Kies 'n bediener naby u. Hierdie "
-#~ "opsie\n"
-#~ "laat u toe om hierdie rekenaar self as 'n tyd-bediener te gebruik."
-
-#~ msgid ""
-#~ "Graphic Card\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "graphic card installed on your machine. If it is not the case, you can\n"
-#~ "choose from this list the card you actually have installed.\n"
-#~ "\n"
-#~ "   In the situation where different servers are available for your card,\n"
-#~ "with or without 3D acceleration, you are asked to choose the server that\n"
-#~ "best suits your needs."
-#~ msgstr ""
-#~ "Grafiesekaart\n"
-#~ "\n"
-#~ "   Die installeer-program sal in meeste gevalle u grafiesekaart "
-#~ "outomaties\n"
-#~ "opspoor. Indien daar probleme is, kan u self van hierdie lys die kaart\n"
-#~ "kies.\n"
-#~ "\n"
-#~ "   Dit mag gebeur dat daar verskillende tipe X-bedieners beskikbaar sal\n"
-#~ "wees vir u kaart, met of sonder 3D-versnelling, kies dan die een wat u\n"
-#~ "behoefdes die beste sal bevredig."
-
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-#~ "\n"
-#~ "You will be presented with a list of different parameters to change to "
-#~ "get\n"
-#~ "an optimal graphical display: Graphic Card\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "graphic card installed on your machine. If it is not the case, you can\n"
-#~ "choose from this list the card you actually have installed.\n"
-#~ "\n"
-#~ "   In the situation where different servers are available for your card,\n"
-#~ "with or without 3D acceleration, you are asked to choose the server that\n"
-#~ "best suits your needs.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Monitor\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "monitor connected to your machine. If it is incorrect, you can choose "
-#~ "from\n"
-#~ "this list the monitor you actually have connected to your computer.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Resolution\n"
-#~ "\n"
-#~ "   Here you can choose the resolutions and color depths available for "
-#~ "your\n"
-#~ "hardware. Choose the one that best suits your needs (you will be able to\n"
-#~ "change that after installation though). A sample of the chosen\n"
-#~ "configuration is shown in the monitor picture.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Test\n"
-#~ "\n"
-#~ "   Depending on your hardware, this entry might not appear.\n"
-#~ "\n"
-#~ "   the system will try to open a graphical screen at the desired\n"
-#~ "resolution. If you can see the message during the test and answer \"%s"
-#~ "\",\n"
-#~ "then DrakX will proceed to the next step. If you cannot see the message, "
-#~ "it\n"
-#~ "means that some part of the auto-detected configuration was incorrect "
-#~ "and\n"
-#~ "the test will automatically end after 12 seconds, bringing you back to "
-#~ "the\n"
-#~ "menu. Change settings until you get a correct graphical display.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Options\n"
-#~ "\n"
-#~ "   Here you can choose whether you want to have your machine "
-#~ "automatically\n"
-#~ "switch to a graphical interface at boot. Obviously, you want to check\n"
-#~ "\"%s\" if your machine is to act as a server, or if you were not "
-#~ "successful\n"
-#~ "in getting the display configured."
-#~ msgstr ""
-#~ "X (staan vir X Window Stelsel -let geen 's') is die hart van die GNU/"
-#~ "Linux \n"
-#~ "se grafiese-koppelvlak. Bo-op X, laai grafiese omgewings. ( dit sluit\n"
-#~ "KDE, GNOME, AfterStep, WindowMaker ens. in)\n"
-#~ "\n"
-#~ "Hier is 'n lys van verstellings wat u kan verander om die beste "
-#~ "resultate\n"
-#~ "te verkry: Grafiesekaart\n"
-#~ "\n"
-#~ "Die program sal gewoonlik die regte grafiesekaart optel en opstel.\n"
-#~ "Indien nie, kan u self die regte een vanaf hierdie lys kies.\n"
-#~ "\n"
-#~ "   Dit mag gebeur dat daar verskillende tipe X-bedieners beskikbaar sal\n"
-#~ "wees vir u kaart, met of sonder 3D-versnelling, kies dan die een wat u\n"
-#~ "behoefdes die beste sal bevredig.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Monitor\n"
-#~ "\n"
-#~ "   Die program sal gewoonlik u monitor korrek kies.\n"
-#~ "Indien nie, kan u self die regte een vanaf hierdie lys kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Resolusie\n"
-#~ "\n"
-#~ "   Hier kan u die resolusie en aantal kleure kies wat vir u hardeware\n"
-#~ "beskikbaar is. Kies die een wat u die beste sal pas.( let dat u wel\n"
-#~ "hierdie keuse weer kan verander na die installasie). 'n voorbeeld\n"
-#~ "van die gekose konfigurasie word vertoon op die skerm.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Toets\n"
-#~ "\n"
-#~ "   Afhangende van u hardeware, sal die inskrywing moontlik weg wees.\n"
-#~ "\n"
-#~ "   ons gaan 'n grafiese skerm probeer opstel met die verstellings\n"
-#~ "wat u gemaak het. Indien u die boodskap daarop kan sien en \"%s\"\n"
-#~ "antwoord, sal DrakX na die volgende stap gaan. Indien u nie die boodskap\n"
-#~ "kan sien nie, dui dit aan dat iets nie reg opgestel is nie. Die toets sal "
-#~ "dan\n"
-#~ "na 12 sekondes eindig, en terugval na die kieslys toe. Verander dan u\n"
-#~ "keuses vir nog 'n probeerslag.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Opsies\n"
-#~ "\n"
-#~ "   Hier kan u spesifiseer indien u rekenaar die grafiese-koppelvlak moet\n"
-#~ "begin tydens selflaai. U kan \"%s\" merk indien u 'die rekenaar as "
-#~ "bediener\n"
-#~ "gaan gebruik, of indien u nie X met sukses kon opstel nie"
-
-#~ msgid ""
-#~ "Monitor\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "monitor connected to your machine. If it is incorrect, you can choose "
-#~ "from\n"
-#~ "this list the monitor you actually have connected to your computer."
-#~ msgstr ""
-#~ "Monitor\n"
-#~ "\n"
-#~ "   Die program sal gewoonlik u monitor korrek kies.\n"
-#~ "Indien nie, kan u self die regte een vanaf hierdie lys kies."
-
-#~ msgid ""
-#~ "Resolution\n"
-#~ "\n"
-#~ "   Here you can choose the resolutions and color depths available for "
-#~ "your\n"
-#~ "hardware. Choose the one that best suits your needs (you will be able to\n"
-#~ "change that after installation though). A sample of the chosen\n"
-#~ "configuration is shown in the monitor picture."
-#~ msgstr ""
-#~ "Resolusie\n"
-#~ "\n"
-#~ "   Hier kan u die resolusie en aantal kleure kies wat vir u hardeware\n"
-#~ "beskikbaar is. Kies die een wat u die beste sal pas.( let dat u wel "
-#~ "hierdie\n"
-#~ "keuse weer kan verander na die installasie). 'n voorbeeld van die gekose\n"
-#~ "konfigurasie word vertoon op die skerm."
-
-#~ msgid ""
-#~ "In the situation where different servers are available for your card, "
-#~ "with\n"
-#~ "or without 3D acceleration, you are asked to choose the server that best\n"
-#~ "suits your needs."
-#~ msgstr ""
-#~ "Indien daar verskillende tipe bedieners vir u kaart beskikbaar is, met "
-#~ "of\n"
-#~ "sonder 3D-versnelling, sal u gevra word om die een te kies wat u die "
-#~ "beste\n"
-#~ "sal pas."
-
-#~ msgid ""
-#~ "Options\n"
-#~ "\n"
-#~ "   Here you can choose whether you want to have your machine "
-#~ "automatically\n"
-#~ "switch to a graphical interface at boot. Obviously, you want to check\n"
-#~ "\"%s\" if your machine is to act as a server, or if you were not "
-#~ "successful\n"
-#~ "in getting the display configured."
-#~ msgstr ""
-#~ "Opsies\n"
-#~ "\n"
-#~ "   hier kan u kies of u die rekenaar wil laat eindig in 'n grafiese "
-#~ "koppelvlak\n"
-#~ "na dit aangeskakel is. U sal natuurlik \"%s\" kies indien die rekenaar "
-#~ "as\n"
-#~ "'n bediener gebruik gaan word, of u nie die skerm reg kon opstel nie."
-
-#~ msgid ""
-#~ "At this point, you need to decide where you want to install the Mandrake\n"
-#~ "Linux operating system on your hard drive. If your hard drive is empty "
-#~ "or\n"
-#~ "if an existing operating system is using all the available space you "
-#~ "will\n"
-#~ "have to partition the drive. Basically, partitioning a hard drive "
-#~ "consists\n"
-#~ "of logically dividing it to create the space needed to install your new\n"
-#~ "Mandriva Linux system.\n"
-#~ "\n"
-#~ "Because the process of partitioning a hard drive is usually irreversible\n"
-#~ "and can lead to lost data if there is an existing operating system "
-#~ "already\n"
-#~ "installed on the drive, partitioning can be intimidating and stressful "
-#~ "if\n"
-#~ "you are an inexperienced user. Fortunately, DrakX includes a wizard "
-#~ "which\n"
-#~ "simplifies this process. Before continuing with this step, read through "
-#~ "the\n"
-#~ "rest of this section and above all, take your time.\n"
-#~ "\n"
-#~ "Depending on your hard drive configuration, several options are "
-#~ "available:\n"
-#~ "\n"
-#~ " * \"%s\": this option will perform an automatic partitioning of your "
-#~ "blank\n"
-#~ "drive(s). If you use this option there will be no further prompts.\n"
-#~ "\n"
-#~ " * \"%s\": the wizard has detected one or more existing Linux partitions "
-#~ "on\n"
-#~ "your hard drive. If you want to use them, choose this option. You will "
-#~ "then\n"
-#~ "be asked to choose the mount points associated with each of the "
-#~ "partitions.\n"
-#~ "The legacy mount points are selected by default, and for the most part "
-#~ "it's\n"
-#~ "a good idea to keep them.\n"
-#~ "\n"
-#~ " * \"%s\": if Microsoft Windows is installed on your hard drive and "
-#~ "takes\n"
-#~ "all the space available on it, you will have to create free space for\n"
-#~ "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-#~ "data (see ``Erase entire disk'' solution) or resize your Microsoft "
-#~ "Windows\n"
-#~ "FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-#~ "data, provided you have previously defragmented the Windows partition.\n"
-#~ "Backing up your data is strongly recommended.. Using this option is\n"
-#~ "recommended if you want to use both Mandriva Linux and Microsoft Windows "
-#~ "on\n"
-#~ "the same computer.\n"
-#~ "\n"
-#~ "   Before choosing this option, please understand that after this\n"
-#~ "procedure, the size of your Microsoft Windows partition will be smaller\n"
-#~ "then when you started. You will have less free space under Microsoft\n"
-#~ "Windows to store your data or to install new software.\n"
-#~ "\n"
-#~ " * \"%s\": if you want to delete all data and all partitions present on\n"
-#~ "your hard drive and replace them with your new Mandriva Linux system,\n"
-#~ "choose this option. Be careful, because you will not be able to undo "
-#~ "your\n"
-#~ "choice after you confirm.\n"
-#~ "\n"
-#~ "   !! If you choose this option, all data on your disk will be "
-#~ "deleted. !!\n"
-#~ "\n"
-#~ " * \"%s\": this will simply erase everything on the drive and begin "
-#~ "fresh,\n"
-#~ "partitioning everything from scratch. All data on your disk will be "
-#~ "lost.\n"
-#~ "\n"
-#~ "   !! If you choose this option, all data on your disk will be lost. !!\n"
-#~ "\n"
-#~ " * \"%s\": choose this option if you want to manually partition your "
-#~ "hard\n"
-#~ "drive. Be careful -- it is a powerful but dangerous choice and you can "
-#~ "very\n"
-#~ "easily lose all your data. That's why this option is really only\n"
-#~ "recommended if you have done something like this before and have some\n"
-#~ "experience. For more instructions on how to use the DiskDrake utility,\n"
-#~ "refer to the ``Managing Your Partitions'' section in the ``Starter "
-#~ "Guide''."
-#~ msgstr ""
-#~ "Op hierdie tydstip moet u besluit waar op die hardeskyf u Mandriva Linux\n"
-#~ "wil installeer. Indien u 'n leë hardeskyf het, of indien 'n bestaande\n"
-#~ "bedryfstelsel al die beskikbare spasie gebruik, sal u partisies moet\n"
-#~ "skep. Om 'n partisie te skep veroorsaak dat u die hardeskyf logies\n"
-#~ "verdeel, om spasie te skep vir u nuwe Mandriva Linux bedryfstelsel.\n"
-#~ "\n"
-#~ "Indien u 'n onervare gebruiker is, kan die skep van partisies vreemd en\n"
-#~ "intimiderend wees.\n"
-#~ "Die skep van partisies is gewoonlik onomkeerbaar en kan dataverlies\n"
-#~ "meebring indien daar reeds 'n bestaande bedryfstelsel op die hardeskyf "
-#~ "is.\n"
-#~ "Gelukkig sluit DrakX 'n assisstent in wat die proses vergemaklik.\n"
-#~ "Voor u verder gaan, lees die volgende deel deeglik deur, en wees rustig!\n"
-#~ "(Moet nie stres kap nie! - Chill Dude!)\n"
-#~ "\n"
-#~ "Afhangende van hoe u hardeskyf gekonfigureer is, is daar 'n aantal "
-#~ "opsies\n"
-#~ "beskikbaar:\n"
-#~ "\n"
-#~ " * \"%s\": hierdie opsie sal die partisies op u leë hardeskyf outomaties\n"
-#~ "opstel.\n"
-#~ "Indien u die een kies, is dit al inset wat u hoef te lewer.\n"
-#~ "\n"
-#~ " * \"%s\": die assistent het een of meer bestaande Linux-partisies op "
-#~ "die\n"
-#~ "hardeskyf gekry. Indien u wil gebruik maak van hulle, kies hierdie "
-#~ "opsie.\n"
-#~ "Daar is verstek hegpunte, wat u kan verander, indien u wil, maar ons "
-#~ "stel\n"
-#~ "voor u hou daarby.\n"
-#~ "\n"
-#~ " * \" %s\": indien u Microsoft Windows op u hardeskyf geïnstalleer het, "
-#~ "en\n"
-#~ "dit neem al die spasie in beslag, moet ons eers 'n plekkie vir Linux "
-#~ "skep. U kan die Microsoft Windows partisie met al die data uitwis\n"
-#~ "(verwys na 'Erase entie disk' oplossing)\n"
-#~ "of u kan die Microsoft Windows FAT of NTFS partisie verklein. Dit kan "
-#~ "geskied\n"
-#~ "sonner verlies van data, mits u die partisie gedefragmenteer het.Ons "
-#~ "beveel ten sterkste aan dat u 'n rugsteun maak van u data. Hierdie is\n"
-#~ "die beste metode indien u beide Mandriva Linux en Microsoft Windows op "
-#~ "die\n"
-#~ "rekenaar wil gebruik.\n"
-#~ "\n"
-#~ "Neem tog kennis dat dit die beskikbare oop spasie in Microsoft Windows "
-#~ "sal\n"
-#~ "verminder, aangesien ons plek moet maak vir Linux op die hardeskyf.\n"
-#~ "\n"
-#~ " * \"%s\": Indien u alle data op alle partisies op u hardeskyf wil "
-#~ "uitwis,\n"
-#~ "en dit dan vervang met Mandriva Linux, kan u hierdie opsie kies.\n"
-#~ "Wees versigtig die opsie is onomkeerbaar!\n"
-#~ "\n"
-#~ "   !! Net weer waarsku: alle data op die skyf sal vernietig word. !! \n"
-#~ " * \"%s\" hierdie opsie gaan doodeenvoudig alles uitwis en van vooraf\n"
-#~ "die hardeskyf partisies skep. Alle data sal verlore gaan.\n"
-#~ "\n"
-#~ "   !! Net weer waarsku: alle data up die skyf sal vernietig word. !! \n"
-#~ " * \"%s\": kies hierdie opsie indien u self die partisies wil opstel. "
-#~ "Wees\n"
-#~ "uiters versigtig -- dit is 'n gevaarlike keuse en u kan maklik al u data "
-#~ "verloor. Hierdieopsie word aanbeveel vir persone wat ondervinding\n"
-#~ "het en vertroud is met Linux .\n"
-#~ "U kan verder oplees oor hoe om te werk te gaan in die \"Managing Your\n"
-#~ "Partitions deel van die \"Starter Guide\"."
-
-#~ msgid ""
-#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
-#~ "ready to use. Just click \"%s\" to reboot the system. Do not forget to\n"
-#~ "remove the installation media (CD-ROM or floppy). The first thing you\n"
-#~ "should see after your computer has finished doing its hardware tests is "
-#~ "the\n"
-#~ "bootloader menu, giving you the choice of which operating system to "
-#~ "start.\n"
-#~ "\n"
-#~ "The \"%s\" button shows two more buttons to:\n"
-#~ "\n"
-#~ " * \"%s\": to create an installation floppy disk that will automatically\n"
-#~ "perform a whole installation without the help of an operator, similar to\n"
-#~ "the installation you just configured.\n"
-#~ "\n"
-#~ "   Note that two different options are available after clicking the "
-#~ "button:\n"
-#~ "\n"
-#~ "    * \"%s\". This is a partially automated installation. The "
-#~ "partitioning\n"
-#~ "step is the only interactive procedure.\n"
-#~ "\n"
-#~ "    * \"%s\". Fully automated installation: the hard disk is completely\n"
-#~ "rewritten, all data is lost.\n"
-#~ "\n"
-#~ "   This feature is very handy when installing a number of similar "
-#~ "machines.\n"
-#~ "See the Auto install section on our web site for more information.\n"
-#~ "\n"
-#~ " * \"%s\": saves a list of the packages selected in this installation. "
-#~ "To\n"
-#~ "use this selection with another installation, insert the floppy and "
-#~ "start\n"
-#~ "the installation. At the prompt, press the [F1] key and type >>linux\n"
-#~ "defcfg=\"floppy\" <<."
-#~ msgstr ""
-#~ "Fluit-fluit my storie is uit! Die installasie het tot 'n einde gekom en "
-#~ "u\n"
-#~ "GNU/Linux reknaar is gereed vir gebruik. Klik bloot op \"%s\" om\n"
-#~ "te herlaai.Onthou tog om die installasie-media (CDROM of Disket)\n"
-#~ "te verwyder. Die eerste skerm wat u sal sien, na die rekenaar sy\n"
-#~ "hardeware-toetse uitgevoer het, is die herlaaistelsel se kieslys.\n"
-#~ "Daar kan u die bedryfstelsel kies wat moet laai.\n"
-#~ "\n"
-#~ "Die \"%s\" knoppie sal nog twee knoppies laat verskyn:\n"
-#~ "\n"
-#~ " * \"%s\": om 'n installasie-disket te skep wat die hele installasie\n"
-#~ "aotomaties sal doen, sonner die hulp van 'n persoon.\n"
-#~ "Dit sal soortgelyk aan hierdie een wees.\n"
-#~ "\n"
-#~ "   Let daarop dat twee verskillende opsies daarna beskikbaar sal wees:\n"
-#~ "\n"
-#~ "     * \"%s\" Gedeeltelik outomaties. Die skep van partisies benodig 'n\n"
-#~ "persoon om te spesifiseer.\n"
-#~ "\n"
-#~ "      * \"%s\" Volkome outomaties. Die hardeskyf word totaal gewis, alle\n"
-#~ "data word verloor.\n"
-#~ "\n"
-#~ "   Hierdie is handig wanneer u 'n paar van dieselfde masjiene moet\n"
-#~ "installeer.\n"
-#~ "Besoek gerus ons webwerf vir meer inligting hieroor.\n"
-#~ "\n"
-#~ " * \"%s\": stoor 'n lys van die gekose pakette in hierdie installasie.\n"
-#~ "Om hierdie keuses met 'n volgende installasie te gebruik, plaas disket\n"
-#~ "in aandrywer en begin die installasie. Kies [F1] en tik '>> linux\n"
-#~ "defcfg=\"floppy\" <<' in."
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for use\n"
-#~ "(formatting means creating a file system).\n"
-#~ "\n"
-#~ "At this time, you may wish to reformat some already existing partitions "
-#~ "to\n"
-#~ "erase any data they contain. If you wish to do that, please select those\n"
-#~ "partitions as well.\n"
-#~ "\n"
-#~ "Please note that it is not necessary to reformat all pre-existing\n"
-#~ "partitions. You must reformat the partitions containing the operating\n"
-#~ "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-#~ "reformat partitions containing data that you wish to keep (typically\n"
-#~ "\"/home\").\n"
-#~ "\n"
-#~ "Please be careful when selecting partitions. After formatting, all data "
-#~ "on\n"
-#~ "the selected partitions will be deleted and you will not be able to "
-#~ "recover\n"
-#~ "it.\n"
-#~ "\n"
-#~ "Click on \"%s\" when you are ready to format the partitions.\n"
-#~ "\n"
-#~ "Click on \"%s\" if you want to choose another partition for your new\n"
-#~ "Mandriva Linux operating system installation.\n"
-#~ "\n"
-#~ "Click on \"%s\" if you wish to select partitions that will be checked "
-#~ "for\n"
-#~ "bad blocks on the disk."
-#~ msgstr ""
-#~ "Enige nuwe partisies moet eers geformatteer word voor dit bruikbaar is.\n"
-#~ "(formatteer beteken dan ons 'n lêerstelsel daarop skep).\n"
-#~ "\n"
-#~ "U kan ook nou kies om bestaande partisies te formatteer om so al die\n"
-#~ "data daarop uit te vee. Kies asseblief dan nou daardie partisies ook.\n"
-#~ "\n"
-#~ "Let tog daarop dat die NIE nodig is om al die vooraf-bestaande partisies\n"
-#~ "weer te formatteer NIE. U moet wel partisies wat die bedryfstelsel bevat\n"
-#~ "formatteer. ( byvoorbeeld \"/\",\"/usr\" of \"/var\") maar partisies met\n"
-#~ "data wat u graag wil hou ( bv \"/home\") moet nie geformatteer word\n"
-#~ "nie.\n"
-#~ "\n"
-#~ "Wees daarom versigtig wanneer u die partisies kies. Na dit geformatteer\n"
-#~ "is, sal ALLE data daarop vernietig wees.\n"
-#~ "\n"
-#~ "Klik op \"%s\" sodra u gereed is om te formatteer.\n"
-#~ "\n"
-#~ "Klik op \"%s\" indien u 'n ander partisie vir die installasie van u nuwe\n"
-#~ "Madrake Linux bedryfstelsel wil kies\n"
-#~ "\n"
-#~ "Klik op \"%s\" indien u partisies wil kies wat dan ondersoek en\n"
-#~ "getoets moet word."
-
-#~ msgid ""
-#~ "At the time you are installing Mandriva Linux, it is likely that some\n"
-#~ "packages will have been updated since the initial release. Bugs may have\n"
-#~ "been fixed, security issues resolved. To allow you to benefit from these\n"
-#~ "updates, you are now able to download them from the Internet. Check \"%s"
-#~ "\"\n"
-#~ "if you have a working Internet connection, or \"%s\" if you prefer to\n"
-#~ "install updated packages later.\n"
-#~ "\n"
-#~ "Choosing \"%s\" will display a list of places from which updates can be\n"
-#~ "retrieved. You should choose one near to you. A package-selection tree "
-#~ "will\n"
-#~ "appear: review the selection, and press \"%s\" to retrieve and install "
-#~ "the\n"
-#~ "selected package(s), or \"%s\" to abort."
-#~ msgstr ""
-#~ "Teen die tyd wat u Mandriva Linux installeer, is dit hoogs waarskynlik\n"
-#~ "dat van die pakkette intussen opgedateer is. Foute kom reggestel wees,\n"
-#~ "of sekuriteits probleme is dalk opgelos. Om voordeel hieruit te put, kan\n"
-#~ "u hulle nou van die Internet aflaai. Merk \"%s\" indien u 'n werkende\n"
-#~ "Internetkonneksie het, of \"%s\" sou u dit eers later wil doen\n"
-#~ "\n"
-#~ "Deur \"%s\" te kies, kan u 'n lys plekke sien waarvanaf hierdie\n"
-#~ " pakkette gelaai kan word. Kies 'n geskikte een. 'n Boom-struktuur\n"
-#~ " met die nuwwe pakkette in sal verskyn. As u gelukkig is met almal,kan u\n"
-#~ " \"%s\" klik om hulle af te laai en te installeer, of \"%s\" om te "
-#~ "ontsnap."
-
-#~ msgid ""
-#~ "At this point, DrakX will allow you to choose the security level desired\n"
-#~ "for the machine. As a rule of thumb, the security level should be set\n"
-#~ "higher if the machine will contain crucial data, or if it will be a "
-#~ "machine\n"
-#~ "directly exposed to the Internet. The trade-off of a higher security "
-#~ "level\n"
-#~ "is generally obtained at the expense of ease of use.\n"
-#~ "\n"
-#~ "If you do not know what to choose, stay with the default option. You "
-#~ "will\n"
-#~ "be able to change that security level later with tool draksec from the\n"
-#~ "Mandrake Control Center.\n"
-#~ "\n"
-#~ "The \"%s\" field can inform the system of the user on this computer who\n"
-#~ "will be responsible for security. Security messages will be sent to that\n"
-#~ "address."
-#~ msgstr ""
-#~ "Op hierdie tydstip laat DrakX u toe om die sekuriteitsvlak vir die\n"
-#~ "rekenaar te kies. 'n Algemene reel is dat die sekuriteit hoër behoort\n"
-#~ "te wees indien die masjien belangrike inligting bevat, of direk aan\n"
-#~ "die Internet gekoppel is. Hierdie hoër sekuriteit kom met die koste dat\n"
-#~ "dit algemene gebruik op die rekenaar moeiliker maak.\n"
-#~ "\n"
-#~ "Indien u onseker is oor wat om te kies, bly by die verstek opsie. U\n"
-#~ "kan altyd later die vlak verander deur draksec in die Mandrake Control\n"
-#~ "Center te grbruik.\n"
-#~ "\n"
-#~ "Die \"%s\" veld kan boodskappe stuur na 'n gekose persoon wat\n"
-#~ "verantwoordelik is vir die sekuriteit. Hy/sy sal dan gereelde boodskappe\n"
-#~ "ontvang rakende die stand van die sekuriteit."
-
-#~ msgid ""
-#~ "\"%s\": check the current country selection. If you are not in this\n"
-#~ "country, click on the \"%s\" button and choose another one. If your "
-#~ "country\n"
-#~ "is not in the first list shown, click the \"%s\" button to get the "
-#~ "complete\n"
-#~ "country list."
-#~ msgstr ""
-#~ "\"%s\": ondersoek die huidige landskeuse. Indien u nie in daardie land\n"
-#~ "is nie, klik op die \"%s\"-knoppie en kies die regte een. Indien u land\n"
-#~ "nie in daardie lys teenwoordig is nie, kies die \"%s\"-knoppie vir 'n\n"
-#~ "volledige lys."
-
-#~ msgid ""
-#~ "This step is activated only if an existing GNU/Linux partition has been\n"
-#~ "found on your machine.\n"
-#~ "\n"
-#~ "DrakX now needs to know if you want to perform a new install or an "
-#~ "upgrade\n"
-#~ "of an existing Mandriva Linux system:\n"
-#~ "\n"
-#~ " * \"%s\": For the most part, this completely wipes out the old system. "
-#~ "If\n"
-#~ "you wish to change how your hard drives are partitioned, or change the "
-#~ "file\n"
-#~ "system, you should use this option. However, depending on your "
-#~ "partitioning\n"
-#~ "scheme, you can prevent some of your existing data from being over-"
-#~ "written.\n"
-#~ "\n"
-#~ " * \"%s\": this installation class allows you to update the packages\n"
-#~ "currently installed on your Mandriva Linux system. Your current\n"
-#~ "partitioning scheme and user data is not altered. Most of other\n"
-#~ "configuration steps remain available, similar to a standard "
-#~ "installation.\n"
-#~ "\n"
-#~ "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-#~ "running version \"8.1\" or later. Performing an Upgrade on versions "
-#~ "prior\n"
-#~ "to Mandriva Linux version \"8.1\" is not recommended."
-#~ msgstr ""
-#~ "Hierdie stap word slegs gedoen indien ou GNU/Linux partisies op die\n"
-#~ "rekenaar gevind is.\n"
-#~ "\n"
-#~ "DrakX moet nou weet of u 'n nuwe installasie of 'n opgradering van 'n\n"
-#~ "bestaande Mandriva Linux wil doen:\n"
-#~ "\n"
-#~ " * \"%s\": Hierdie deel word grootliks gebruik vir 'n hele nuwe "
-#~ "installasie.\n"
-#~ "Indien u aan die hardeskywe se partisies of die lêerstelsel wil "
-#~ "verander,\n"
-#~ "moet u hierdie opsie kies. Maar u kan ook hierdie een kies indien u "
-#~ "sekere\n"
-#~ "van u partisies se data wil behou.\n"
-#~ "\n"
-#~ " * \"%s\": hierdie tipe installasie laat u toe om pakkette op te dateer\n"
-#~ "wat deel uitmaak van u huidige Mandriva Linux installasie. Die partisies\n"
-#~ "en gebruiker se data bly onveranderd. Ander stappe is baie dieselfde as\n"
-#~ "'n normale installasie.\n"
-#~ "\n"
-#~ "Die gebruik van die 'Opdateer' opsie behoort reg te werk vir al die\n"
-#~ "weergawes vanaf \"8.1\" en opwaarts. Ons raai u af on dit op weergawes\n"
-#~ "ouer as \"8.1\" te probeer."
-
-#~ msgid ""
-#~ "Depending on the language you chose in section , DrakX will "
-#~ "automatically\n"
-#~ "select a particular type of keyboard configuration. Check that the\n"
-#~ "selection suits you or choose another keyboard layout.\n"
-#~ "\n"
-#~ "Also, you may not have a keyboard that corresponds exactly to your\n"
-#~ "language: for example, if you are an English-speaking Swiss native, you "
-#~ "may\n"
-#~ "have a Swiss keyboard. Or if you speak English and are located in "
-#~ "Quebec,\n"
-#~ "you may find yourself in the same situation where your native language "
-#~ "and\n"
-#~ "country-set keyboard do not match. In either case, this installation "
-#~ "step\n"
-#~ "will allow you to select an appropriate keyboard from a list.\n"
-#~ "\n"
-#~ "Click on the \"%s\" button to be presented with the complete list of\n"
-#~ "supported keyboards.\n"
-#~ "\n"
-#~ "If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-#~ "dialog will allow you to choose the key binding that will switch the\n"
-#~ "keyboard between the Latin and non-Latin layouts."
-#~ msgstr ""
-#~ "Afhangende van die verstek taal wat u kies, sal DrakX outomaties 'n\n"
-#~ "betrokke steutelbord-konfigurasie kies. U mag moontlik 'n sleutelbord\n"
-#~ "besit wat nie 100-persent ooreenstem met u taal nie: byvoorbeeld as u 'n\n"
-#~ "Ingelse Sweed is, sal u dalk 'n sweedse sleutelbord besit. Hier is nog\n"
-#~ "een: gestel jy is 'n Afrikaner wat werk in Quebec, u sal dalk met 'n "
-#~ "ander\n"
-#~ "tipe sleutelbord moet klaarkom as wat u gewoond is. Wel, hier kan u die\n"
-#~ "gepaste sleutelbord uit 'n lys kies.\n"
-#~ "\n"
-#~ "Klik op die \"%s\"-knoppie vir 'n lys van al die ondersteunde "
-#~ "sleutelborde\n"
-#~ "\n"
-#~ "Indien u 'n nie-Latynse sleutelbord kies, sal die volgende dialoog u\n"
-#~ "toelaat om sleutel-bindings tussen Latynse en nie-Latynse uitlegte\n"
-#~ "te kies."
-
-#~ msgid ""
-#~ "Your choice of preferred language will affect the language of the\n"
-#~ "documentation, the installer and the system in general. Select first the\n"
-#~ "region you are located in, and then the language you speak.\n"
-#~ "\n"
-#~ "Clicking on the \"%s\" button will allow you to select other languages "
-#~ "to\n"
-#~ "be installed on your workstation, thereby installing the language-"
-#~ "specific\n"
-#~ "files for system documentation and applications. For example, if you "
-#~ "will\n"
-#~ "host users from Spain on your machine, select English as the default\n"
-#~ "language in the tree view and \"%s\" in the Advanced section.\n"
-#~ "\n"
-#~ "About UTF-8 (unicode) support: Unicode is a new character encoding meant "
-#~ "to\n"
-#~ "cover all existing languages. Though full support for it in GNU/Linux is\n"
-#~ "still under development. For that reason, Mandriva Linux will be using "
-#~ "it\n"
-#~ "or not depending on the user choices:\n"
-#~ "\n"
-#~ " * If you choose a languages with a strong legacy encoding (latin1\n"
-#~ "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, "
-#~ "most\n"
-#~ "iso-8859-2 languages), the legacy encoding will be used by default;\n"
-#~ "\n"
-#~ " * Other languages will use unicode by default;\n"
-#~ "\n"
-#~ " * If two or more languages are required, and those languages are not "
-#~ "using\n"
-#~ "the same encoding, then unicode will be used for the whole system;\n"
-#~ "\n"
-#~ " * Finally, unicode can also be forced for the system at user request by\n"
-#~ "selecting option \"%s\" independently of which language(s) have been\n"
-#~ "chosen.\n"
-#~ "\n"
-#~ "Note that you're not limited to choosing a single additional language. "
-#~ "You\n"
-#~ "may choose several ones, or even install them all by selecting the \"%s"
-#~ "\"\n"
-#~ "box. Selecting support for a language means translations, fonts, spell\n"
-#~ "checkers, etc. for that language will also be installed.\n"
-#~ "\n"
-#~ "To switch between the various languages installed on the system, you can\n"
-#~ "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-#~ "language used by the entire system. Running the command as a regular "
-#~ "user\n"
-#~ "will only change the language settings for that particular user."
-#~ msgstr ""
-#~ "Die taal wat u hier kies sal die dokumentasie se taal, die installeer\n"
-#~ "program, en rekenaar oor die algemeen, beïnvloed. Kies eerstens\n"
-#~ "die area waar u woon, en daarna die taal wat u praat.\n"
-#~ "( Jammer, geen inskrywing vir die wat 'nonsens' wou kies nie! )\n"
-#~ "\n"
-#~ "Deur op die \"%s\"-knoppie te klik, kan u ander tale by kies.\n"
-#~ "Dit sal dan dokumentasie en programme toelaat in daardie ekstra tale.\n"
-#~ "Sou daar byvoorbeeld Spaanse gebruikers op die masjien inteken, kies\n"
-#~ "Afrikaans(of Engels) as die verstek taal en \"%s\" in die Gevorderde\n"
-#~ "seksie.\n"
-#~ "\n"
-#~ "Deur 'n sekere taal te kies, sal vertalings, lettertipes,\n"
-#~ "spelkykers ens vir die betrokke taal geïnstalleer word.\n"
-#~ "\n"
-#~ "Boonop kan die \"%s\" merkblokkie u toelaat om die gebruik van 'unicode\n"
-#~ "(UTF-8)' af te dwing. Let daarop dat dit eksperimenteel is. Indien u "
-#~ "verskillende tale met verskillende koderings kies, sal\n"
-#~ "'nicode'-ondersteuning geïnstalleer word.\n"
-#~ "\n"
-#~ "Let tog daarop dat u nie verbind is tot slegs een ekstra taal nie. U kan "
-#~ "'n\n"
-#~ "paar van hulle kies, as u nou regtig wild wil raak, installeer almal "
-#~ "deur\n"
-#~ "die \"%s\" blokkie te merk!\n"
-#~ "Om tussen verskillende tale te skakel, gebruik \"/usr/bin/localedrake\"\n"
-#~ "Wanneer die supergebruiker (root) dit doen sal dit die taal vir almal\n"
-#~ "verander, en wanneer 'n gewone gebruiker dit doen , sal dit net vir\n"
-#~ "daardie gebruiker verander."
-
-#~ msgid ""
-#~ "Usually, DrakX has no problems detecting the number of buttons on your\n"
-#~ "mouse. If it does, it assumes you have a two-button mouse and will\n"
-#~ "configure it for third-button emulation. The third-button mouse button of "
-#~ "a\n"
-#~ "two-button mouse can be ``pressed'' by simultaneously clicking the left "
-#~ "and\n"
-#~ "right mouse buttons. DrakX will automatically know whether your mouse "
-#~ "uses\n"
-#~ "a PS/2, serial or USB interface.\n"
-#~ "\n"
-#~ "In case you have a 3 buttons mouse without wheel, you can choose the "
-#~ "mouse\n"
-#~ "that says \"%s\". DrakX will then configure your mouse so that you can\n"
-#~ "simulate the wheel with it: to do so, press the middle button and move "
-#~ "your\n"
-#~ "mouse up and down.\n"
-#~ "\n"
-#~ "If for some reason you wish to specify a different type of mouse, select "
-#~ "it\n"
-#~ "from the list provided.\n"
-#~ "\n"
-#~ "If you choose a mouse other than the default, a test screen will be\n"
-#~ "displayed. Use the buttons and wheel to verify that the settings are\n"
-#~ "correct and that the mouse is working correctly. If the mouse is not\n"
-#~ "working well, press the space bar or [Return] key to cancel the test and "
-#~ "to\n"
-#~ "go back to the list of choices.\n"
-#~ "\n"
-#~ "Wheel mice are occasionally not detected automatically, so you will need "
-#~ "to\n"
-#~ "select your mouse from a list. Be sure to select the one corresponding "
-#~ "to\n"
-#~ "the port that your mouse is attached to. After selecting a mouse and\n"
-#~ "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
-#~ "the mouse wheel to ensure that it is activated correctly. Once you see "
-#~ "the\n"
-#~ "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
-#~ "buttons and check that the mouse pointer moves on-screen as you move "
-#~ "your\n"
-#~ "mouse."
-#~ msgstr ""
-#~ "DrakX het gewoonlik geen probleme met die speur van die aantal "
-#~ "muisknoppies\n"
-#~ "nie. Indien wel, sal dit aanneem dat die muis twee knoppies het, en sal "
-#~ "dan\n"
-#~ "3-knop emulasie konfigureer. Die 3de knoppie kan \"gedruk\" word deur "
-#~ "beide\n"
-#~ "knoppies gelyktydig te klik. DrakX sal vanself weet watter tipe muis u "
-#~ "het,\n"
-#~ "of dit nou 'n PS/2, sierie of USB muis mag wees.\n"
-#~ "\n"
-#~ "Indien u muis 3 knoppies het, maar nie 'n wielletjie nie, kan u \"%s\" "
-#~ "kies\n"
-#~ "DrakX sal dan u muis so opstel dat die wielletjie gesimuleer word. Druk\n"
-#~ "die middel knoppie en beweeg die muis op en af - maklik!\n"
-#~ "\n"
-#~ "Indien u moontlik 'n ander tipe muis wil spesifiseer, kies dit vanaf die\n"
-#~ " voorsiende lys.\n"
-#~ "\n"
-#~ "Indien u gekose muis verskil van die verstek muis, sal 'n toetsskerm\n"
-#~ "vertoon word. Gebruik die knoppies en wielletjie om seker te maak\n"
-#~ "alles werk korrek.\n"
-#~ "Indien u probleme ondervind, druk die spasiebalk of [ Enter ] sleutel om\n"
-#~ "die toets te kansselleer en weer te kies.\n"
-#~ "\n"
-#~ "Wielmuise word soms verkeerdelik geïdentifiseer, dan moet u self u\n"
-#~ "muis vanaf die lys kies.\n"
-#~ "Maak tog seker u kies die regte poort waaraan die muis\n"
-#~ "gekoppel is. Na u die muis gekies, en \"%s\" geklik het, sal 'n beeld "
-#~ "van\n"
-#~ " 'n muis verskyn.\n"
-#~ "Rol die wielletjie om te bevestig dat dit korrek funksioneer. Sodra u\n"
-#~ "die beeld van die muis se wielletjie sien reageer, kan u ook die "
-#~ "knoppies\n"
-#~ "en beweging van u muis toets."
-
-#~ msgid ""
-#~ "This is the most crucial decision point for the security of your GNU/"
-#~ "Linux\n"
-#~ "system: you have to enter the \"root\" password. \"Root\" is the system\n"
-#~ "administrator and is the only user authorized to make updates, add "
-#~ "users,\n"
-#~ "change the overall system configuration, and so on. In short, \"root\" "
-#~ "can\n"
-#~ "do everything! That is why you must choose a password that is difficult "
-#~ "to\n"
-#~ "guess - DrakX will tell you if the password you chose is too easy. As "
-#~ "you\n"
-#~ "can see, you are not forced to enter a password, but we strongly advise "
-#~ "you\n"
-#~ "against this. GNU/Linux is just as prone to operator error as any other\n"
-#~ "operating system. Since \"root\" can overcome all limitations and\n"
-#~ "unintentionally erase all data on partitions by carelessly accessing the\n"
-#~ "partitions themselves, it is important that it be difficult to become\n"
-#~ "\"root\".\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. Never write down the \"root\" password -- it makes it "
-#~ "far\n"
-#~ "too easy to compromise a system.\n"
-#~ "\n"
-#~ "One caveat -- do not make the password too long or complicated because "
-#~ "you\n"
-#~ "must be able to remember it!\n"
-#~ "\n"
-#~ "The password will not be displayed on screen as you type it in. To "
-#~ "reduce\n"
-#~ "the chance of a blind typing error you will need to enter the password\n"
-#~ "twice. If you do happen to make the same typing error twice, this\n"
-#~ "``incorrect'' password will be the one you will have use the first time "
-#~ "you\n"
-#~ "connect.\n"
-#~ "\n"
-#~ "If you wish access to this computer to be controlled by an "
-#~ "authentication\n"
-#~ "server, click the \"%s\" button.\n"
-#~ "\n"
-#~ "If your network uses either LDAP, NIS, or PDC Windows Domain "
-#~ "authentication\n"
-#~ "services, select the appropriate one for \"%s\". If you do not know "
-#~ "which\n"
-#~ "one to use, you should ask your network administrator.\n"
-#~ "\n"
-#~ "If you happen to have problems with remembering passwords, if your "
-#~ "computer\n"
-#~ "will never be connected to the Internet and you absolutely trust "
-#~ "everybody\n"
-#~ "who uses your computer, you can choose to have \"%s\"."
-#~ msgstr ""
-#~ "Hierdie is die belangrikste oomblik vir u GNU/Linux-rekenaar se "
-#~ "sekuriteit:\n"
-#~ "u moet 'n wagwoord voorsien vir \"root\". \"Root\" is die supergebruiker "
-#~ "wat\n"
-#~ "dinge doen soos om die sagteware op te dateer, gebruikers by te voeg,\n"
-#~ "en die konfigurasie te verander. \"Root\" kan alles doen! Hieroor moet\n"
-#~ "u 'n deeglike wagwoord vir \"root\" kies - (DrakX sal jou tune as die "
-#~ "wag-\n"
-#~ "woord nie op spec is nie.) U kan wel die wagwoord uitlaat, maar dit word\n"
-#~ "te sterkste afgeraai. GNU/Linux is net so vatbaar vir foute soos enige\n"
-#~ "ander bedryfstelsel. Aangesien \"root\" geen perke het nie, kan hy/sy\n"
-#~ "maklik skade aanrig as die persoon roekeloos handel. Dit moet dus\n"
-#~ "moeilik wees vir 'n persoon om \"root\" te word.\n"
-#~ "\n"
-#~ "Die wagwoord behoort 'n mengsel van letters en syfers te wees en ten "
-#~ "minste\n"
-#~ "8 karakters lank te wees. Moet dit nie neerskryf nie, dit veroorsaak 'n\n"
-#~ "swak skakel\n"
-#~ "\n"
-#~ "Moet dit ook nie te vreemd maak nie, u moet dit tog kan onthou!\n"
-#~ "\n"
-#~ "Indien u gebruik maak van 'n eksterne bediener wat die toegang beheer,\n"
-#~ "klik op die \"%s\"-knoppie.\n"
-#~ "\n"
-#~ "Indien u netwerk gebruik maak van LDAP, NIS of 'n Windows PDC, moet\n"
-#~ "u die gepaste diens vir \"%s\" kies. Vra u administrateur indien u nie "
-#~ "weet\n"
-#~ "watter een om te kies nie.\n"
-#~ "\n"
-#~ "Indien u probleme ondervind om wagwoorde te onthou, en die rekenaar is\n"
-#~ "ver van die Internet af, en u vertrou almal wat die masjien gebruik, kan "
-#~ "u\n"
-#~ "kies om \"%s\" te gebruik. -once & heavy!-"
-
-#~ msgid ""
-#~ "This dialog allows you to fine tune your bootloader:\n"
-#~ "\n"
-#~ " * \"%s\": there are three choices for your bootloader:\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer GRUB (text menu).\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer LILO with its text menu interface.\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer LILO with its graphical interface.\n"
-#~ "\n"
-#~ " * \"%s\": in most cases, you will not change the default (\"%s\"), but "
-#~ "if\n"
-#~ "you prefer, the bootloader can be installed on the second hard drive\n"
-#~ "(\"%s\"), or even on a floppy disk (\"%s\");\n"
-#~ "\n"
-#~ " * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
-#~ "given to the user at the console to select a boot entry other than the\n"
-#~ "default.\n"
-#~ "\n"
-#~ " * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n"
-#~ "management, notably for laptops. If you know your hardware supports it "
-#~ "and\n"
-#~ "you need it, check this box.\n"
-#~ "\n"
-#~ " * \"%s\": If you noticed hardware problems on your machine (IRQ "
-#~ "conflicts,\n"
-#~ "instabilities, machine freeze, ...) you should try disabling APIC by\n"
-#~ "checking this box.\n"
-#~ "\n"
-#~ "!! Be aware that if you choose not to install a bootloader (by selecting\n"
-#~ "\"%s\"), you must ensure that you have a way to boot your Mandriva Linux\n"
-#~ "system! Be sure you know what you are doing before changing any of the\n"
-#~ "options. !!\n"
-#~ "\n"
-#~ "Clicking the \"%s\" button in this dialog will offer advanced options "
-#~ "which\n"
-#~ "are normally reserved for the expert user."
-#~ msgstr ""
-#~ "Hierdie deel help met die fyner verstelling van u\n"
-#~ "herlaaistelsel: \n"
-#~ "\n"
-#~ " * \"%s\": kies een van drie herlaaistelsels:\n"
-#~ "\n"
-#~ "    * \"%s\": indien u grub (teks-kieslys) verkies.\n"
-#~ "\n"
-#~ "    * \"%s\": indien u LILO met 'n teks-koppelvlak verkies.\n"
-#~ "\n"
-#~ "    * \"%s\": indien u LILO met 'n grafiese-koppelvlak verkies.\n"
-#~ "\n"
-#~ " * \"%s\": in die meeste gevalle, sal die verstek (\"%s\") reg wees, "
-#~ "indien\n"
-#~ "u so verkies, kan die herlaaistelsel op die tweede hardeskyf "
-#~ "geïnstalleer\n"
-#~ "word (\"%s\"), of selfs op 'n disket (\"%s\");\n"
-#~ "\n"
-#~ " * \"%s\": met die herlaai of selflaai, sal hierdie die wagperiode wees \n"
-#~ "wat aan die gebruiker gegun sal word, waarin hy/sy 'n keuse kan\n"
-#~ "maak oor die bedryfstelsel wat dan sal selflaai\n"
-#~ "\n"
-#~ " * \"%s\": ACPI is 'n nuwe standaard (het verskyn gedurende 2002) vir\n"
-#~ "die beheer van die kragtoevoer veral by skootrekenaars. Indien u seker\n"
-#~ "is dat u hardeware dit ondersteun, en u dit benodig, kies dit.\n"
-#~ "\n"
-#~ " * \"%s\": Indien u probleme ondervind het met die hardeware op u\n"
-#~ "rekenaar (IRQ probleme, onstabiliteit ens,...) kan u APIC de-aktiveer\n"
-#~ "deur die boksie te kies.\n"
-#~ "\n"
-#~ "!! AANDAG: indien u sou verkies om nie 'n herlaaistelsel te installeer\n"
-#~ "nie(deur \"%s\" te kies) moet u 'n ander metode vind om u Mandrake\n"
-#~ "Linux te selflaai! Maak seker dat u uitmaak wat die move doen voor u\n"
-#~ " dit verander, maak uit !!\n"
-#~ "\n"
-#~ "Deur op die \"%s\" knoppie klik, sal u gevorderde opsies kan gebruik\n"
-#~ "wat normaalweg slegs vir slimkoppe nodig is."
-
-#~ msgid "GRUB"
-#~ msgstr "GRUB"
-
-#~ msgid "/dev/hda"
-#~ msgstr "/dev/hda"
-
-#~ msgid "/dev/hdb"
-#~ msgstr "/dev/hdb"
-
-#~ msgid "/dev/fd0"
-#~ msgstr "/dev/fd0"
-
-#~ msgid "Delay before booting the default image"
-#~ msgstr "Wagperiode voor verstekstelsel gelaai word"
-
-#~ msgid ""
-#~ "After you have configured the general bootloader parameters, the list of\n"
-#~ "boot options that will be available at boot time will be displayed.\n"
-#~ "\n"
-#~ "If there are other operating systems installed on your machine they will\n"
-#~ "automatically be added to the boot menu. You can fine-tune the existing\n"
-#~ "options by clicking \"%s\" to create a new entry; selecting an entry and\n"
-#~ "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
-#~ "changes.\n"
-#~ "\n"
-#~ "You may also not want to give access to these other operating systems to\n"
-#~ "anyone who goes to the console and reboots the machine. You can delete "
-#~ "the\n"
-#~ "corresponding entries for the operating systems to remove them from the\n"
-#~ "bootloader menu, but you will need a boot disk in order to boot those "
-#~ "other\n"
-#~ "operating systems!"
-#~ msgstr ""
-#~ "Nadat u die algemene herlaaistelsel se parameters gekies het, sal die\n"
-#~ "lys van beskikbare herlaai-opsies om te kies, na die rekenaar\n"
-#~ "aangeskakel is, vertoon word.\n"
-#~ "\n"
-#~ "Indien daar bestaande bedryfstelsels op u rekenaar is, sal hulle\n"
-#~ "outomaties by die keuses gevoeg word. U kan fyner verstellings\n"
-#~ "maak: \"%s\" vir 'n nuwe toevoeging, kies 'n inskrywing en\n"
-#~ "klik op \"%s\" of \"%s\" om dit te verander of te verwyder.\n"
-#~ "\"%s\" bekragtig u veranderinge.\n"
-#~ "\n"
-#~ "U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die\n"
-#~ "nodige inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe\n"
-#~ "nodig om die betrokke bedryfstelsels te laai!"
-
-#~ msgid ""
-#~ "LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a GRUB/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or any\n"
-#~ "other OS installed on your machine.\n"
-#~ "\n"
-#~ " * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
-#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n"
-#~ "will not install any bootloader. Use it only if you know what you are "
-#~ "doing."
-#~ msgstr ""
-#~ "LILO en grup is herlaaistelsels vir GNU/Linux. Hierdie stap is "
-#~ "normaalweg\n"
-#~ "geheel en al outomaties. DrakX sal u hardeskyf se selflaai-sektor nagaan\n"
-#~ "en dienooreenkomstig handel met wat dit vind:\n"
-#~ "\n"
-#~ " * indien 'n Windows selflaai-sektor teenwoordig is, sal dit met 'n "
-#~ "grub/\n"
-#~ "LILO een vervang word. Dit sal u toelaat om te kan kies watter\n"
-#~ "bedryfstelsel om te laai sodra u die masjien aanskakel.\n"
-#~ "\n"
-#~ " * indien 'n grub of LILO selflaai-sektor teenwoordig is, sal dit "
-#~ "vervang\n"
-#~ "word.\n"
-#~ "\n"
-#~ "Indien DrakX nie self kan besluit nie, sal u gevra word om 'n ligging "
-#~ "vir\n"
-#~ "die herlaaistelsel te voorsien. Gewoonlik is die veiligste plek \"%s\". "
-#~ "Deur \"%s\" te kies, sal DrakX geen herlaaistelsel installeer nie."
-
-#~ msgid ""
-#~ "Now, it's time to select a printing system for your computer. Other OSs "
-#~ "may\n"
-#~ "offer you one, but Mandriva Linux offers two. Each of the printing "
-#~ "systems\n"
-#~ "is best suited to particular types of configuration.\n"
-#~ "\n"
-#~ " * \"%s\" -- which is an acronym for ``print, do not queue'', is the "
-#~ "choice\n"
-#~ "if you have a direct connection to your printer, you want to be able to\n"
-#~ "panic out of printer jams, and you do not have networked printers. (\"%s"
-#~ "\"\n"
-#~ "will handle only very simple network cases and is somewhat slow when "
-#~ "used\n"
-#~ "with networks.) It's recommended that you use \"pdq\" if this is your "
-#~ "first\n"
-#~ "experience with GNU/Linux.\n"
-#~ "\n"
-#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
-#~ "printing to your local printer or to one halfway around the planet. It "
-#~ "is\n"
-#~ "simple to configure and can act as a server or a client for the ancient\n"
-#~ "\"lpd \" printing system, so it is compatible with older operating "
-#~ "systems\n"
-#~ "which may still need print services. While quite powerful, the basic "
-#~ "setup\n"
-#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
-#~ "make\n"
-#~ "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
-#~ "front-ends for printing or choosing printer options and for managing the\n"
-#~ "printer.\n"
-#~ "\n"
-#~ "If you make a choice now, and later find that you do not like your "
-#~ "printing\n"
-#~ "system you may change it by running PrinterDrake from the Mandrake "
-#~ "Control\n"
-#~ "Center and clicking the expert button."
-#~ msgstr ""
-#~ "Dit is nou tyd om u drukkerstelsel te kies. Ander bedryfstelsels sal\n"
-#~ "seker net een aan u bied, maar Mandriva Linux gee twee. Elk van hulle\n"
-#~ "is beter as die ander in sekere gevalle.\n"
-#~ "\n"
-#~ " * \"%s\" -- wat vir \"print, do not queue\" staan. Kies dit indien u\n"
-#~ "'n direkte konneksie na die drukker het, en u blitsig wil inmeng sodra\n"
-#~ "daar probleme is, ook indien u nie netwerk-drukkers het nie. (\"%s\"\n"
-#~ "hanteer net eenvoudige netwerk-toegang en is effe stadig deur die "
-#~ "netwerk)\n"
-#~ "Ons beveel aan dat u \"pdq\" gebruik indien u nog groen is met GNU/"
-#~ "Linux.\n"
-#~ "\n"
-#~ " * \"%s\" - 'Common Unix Printing System', is 'n uitstekende keuse om na\n"
-#~ "u plaaslike drukker, of na een in myle vanaf u, te druk. Eenvoudig om\n"
-#~ "op te stel, kan kliënt of bediener rolle vertolk vir die lpd-fossiel. "
-#~ "Dit\n"
-#~ " beteken dat ons omsien na ons veterane! Dit is baie kragtig, maar 'n\n"
-#~ "elementêre opstel is byna so maklik soos \"pdq\". Indien u 'n lpd-\n"
-#~ "bediener wil nastreef, maak seker dat u die \"cups-lpd\"-daemoon\n"
-#~ "loop. \"%s\" sluit grafiese programme in om vanaf te druk of om\n"
-#~ "opsies te keis en drukkers te bestuur.\n"
-#~ "\n"
-#~ "Sou u die keuse nou, later wil verander, gaan gerus na 'PrinterDrake'\n"
-#~ "in die 'Mandrake Control Center' en klik op die \"Kenner\" knoppie."
-
-#~ msgid ""
-#~ "You can add additional entries in yaboot for other operating systems,\n"
-#~ "alternate kernels, or for an emergency boot image.\n"
-#~ "\n"
-#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
-#~ "partition.\n"
-#~ "\n"
-#~ "For Linux, there are a few possible options:\n"
-#~ "\n"
-#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
-#~ "select this boot option.\n"
-#~ "\n"
-#~ " * Image: this is the name of the kernel to boot. Typically, vmlinux or "
-#~ "a\n"
-#~ "variation of vmlinux with an extension.\n"
-#~ "\n"
-#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-#~ "\n"
-#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
-#~ "assist in initializing video hardware, or to enable keyboard mouse "
-#~ "button\n"
-#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
-#~ "mouse.\n"
-#~ "The following are some examples:\n"
-#~ "\n"
-#~ "   \t      video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-#~ "hda=autotune\n"
-#~ "\n"
-#~ "   \t      video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-#~ "\n"
-#~ " * Initrd: this option can be used either to load initial modules before\n"
-#~ "the boot device is available, or to load a ramdisk image for an "
-#~ "emergency\n"
-#~ "boot situation.\n"
-#~ "\n"
-#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
-#~ "you\n"
-#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
-#~ "ramdisk larger than the default.\n"
-#~ "\n"
-#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
-#~ "read-only, to allow a file system check before the system becomes "
-#~ "``live''.\n"
-#~ "You can override the default with this option.\n"
-#~ "\n"
-#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-#~ "problematic, you can select this option to boot in ``novideo'' mode, "
-#~ "with\n"
-#~ "native frame buffer support.\n"
-#~ "\n"
-#~ " * Default: selects this entry as being the default Linux selection,\n"
-#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
-#~ "be\n"
-#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
-#~ msgstr ""
-#~ "U kan ekstra inskrywings in 'yaboot' maak vir ander bedryfstelsels,\n"
-#~ "alternatiewe 'kernels' of selfs 'n nood-herlaaibeeld.\n"
-#~ "\n"
-#~ "Die inskrywing vir ander bedryfstelsels bestaan uit die naam en die\n"
-#~ "\"root\"partisie van daardie bedryfstelsel.\n"
-#~ "\n"
-#~ "Linux het 'n paar opsies beskikbaar:\n"
-#~ "\n"
-#~ " * Naam: Die naam wat u sal gebruik tydens die 'yaboot' por-teks om\n"
-#~ "hierdie keuse te maak.\n"
-#~ " * Beeld: dit is die naam van die 'kernel' wat gaan selflaai. Gewoonlik "
-#~ "is\n"
-#~ "dit 'vmlinux' of 'n variasie daarvan.\n"
-#~ " * Root: die \"root\" toestel of '/' vir u Linux installasie.\n"
-#~ "\n"
-#~ " * Aanlas: spesifiseer spesifike opsies gewoonlik met hardeware te doen,\n"
-#~ "bv die muis , sie grafiesekaart ens. \n"
-#~ "         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-#~ "hda=autotune\n"
-#~ "\n"
-#~ "         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-#~ "\n"
-#~ " * Initrd: hierdie opsie kan gebruik word om modules te laai alvorens "
-#~ "die\n"
-#~ "'boot' toestel beskikbaar is, of om 'n 'ramdisk' beeld te laai in 'n "
-#~ "nood-\n"
-#~ "herlaai toestand.\n"
-#~ "\n"
-#~ " * Initrd-size: die verstek 'ramdisk' se grootte is gewoonlik 4096 Kb.\n"
-#~ "Indien u 'n groter 'ramdisk' verlang, kan u dit hier spesifiseer.\n"
-#~ "\n"
-#~ " * Read-write: \"root\" word gewoonlik eerstens gehag in lees-alleen "
-#~ "modus\n"
-#~ "dit is om te toets of alles korrek werk met die lêerstelsel. Indien u "
-#~ "dit\n"
-#~ "oorskryf kan u hierdie verstek opsie verander.\n"
-#~ "\n"
-#~ " * NoVideo: sou die Apple grafiese hardeware vir u probleme verskaf\n"
-#~ "kan u herlaai in \"novideo\" modus, met plaaslike \"frame buffer\"\n"
-#~ "ondersteuning\n"
-#~ "\n"
-#~ " * Default: kies hierdie een vir die verstek Linux keuse, waneer u\n"
-#~ "\"ENTER\" druk tydens die yaboot-porteks. Hierdie inskrywing sal verlig\n"
-#~ "wees met 'n '*' indien u [Tab] druk om die herlaai keuses te beskou"
-
-#~ msgid ""
-#~ "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used "
-#~ "to\n"
-#~ "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are "
-#~ "correctly\n"
-#~ "detected and installed in the bootloader menu. If this is not the case, "
-#~ "you\n"
-#~ "can add an entry by hand in this screen. Take care to choose the correct\n"
-#~ "parameters.\n"
-#~ "\n"
-#~ "Yaboot's main options are:\n"
-#~ "\n"
-#~ " * Init Message: a simple text message displayed before the boot prompt.\n"
-#~ "\n"
-#~ " * Boot Device: indicates where you want to place the information "
-#~ "required\n"
-#~ "to boot to GNU/Linux. Generally, you set up a bootstrap partition "
-#~ "earlier\n"
-#~ "to hold this information.\n"
-#~ "\n"
-#~ " * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-#~ "yaboot. The first delay is measured in seconds and at this point, you "
-#~ "can\n"
-#~ "choose between CD, OF boot, MacOS or Linux;\n"
-#~ "\n"
-#~ " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-#~ "After selecting Linux, you will have this delay in 0.1 second increments\n"
-#~ "before your default kernel description is selected;\n"
-#~ "\n"
-#~ " * Enable CD Boot?: checking this option allows you to choose ``C'' for "
-#~ "CD\n"
-#~ "at the first boot prompt.\n"
-#~ "\n"
-#~ " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-#~ "Open Firmware at the first boot prompt.\n"
-#~ "\n"
-#~ " * Default OS: you can select which OS will boot by default when the "
-#~ "Open\n"
-#~ "Firmware Delay expires."
-#~ msgstr ""
-#~ "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used "
-#~ "to\n"
-#~ "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are "
-#~ "correctly\n"
-#~ "detected and installed in the bootloader menu. If this is not the case, "
-#~ "you\n"
-#~ "can add an entry by hand in this screen. Take care to choose the correct\n"
-#~ "parameters.\n"
-#~ "\n"
-#~ "Yaboot's main options are:\n"
-#~ "\n"
-#~ " * Init Message: a simple text message displayed before the boot prompt.\n"
-#~ "\n"
-#~ " * Boot Device: indicates where you want to place the information "
-#~ "required\n"
-#~ "to boot to GNU/Linux. Generally, you set up a bootstrap partition "
-#~ "earlier\n"
-#~ "to hold this information.\n"
-#~ "\n"
-#~ " * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-#~ "yaboot. The first delay is measured in seconds and at this point, you "
-#~ "can\n"
-#~ "choose between CD, OF boot, MacOS or Linux;\n"
-#~ "\n"
-#~ " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-#~ "After selecting Linux, you will have this delay in 0.1 second increments\n"
-#~ "before your default kernel description is selected;\n"
-#~ "\n"
-#~ " * Enable CD Boot?: checking this option allows you to choose ``C'' for "
-#~ "CD\n"
-#~ "at the first boot prompt.\n"
-#~ "\n"
-#~ " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-#~ "Open Firmware at the first boot prompt.\n"
-#~ "\n"
-#~ " * Default OS: you can select which OS will boot by default when the "
-#~ "Open\n"
-#~ "Firmware Delay expires."
-
-#~ msgid ""
-#~ "\"%s\": if a sound card is detected on your system, it is displayed "
-#~ "here.\n"
-#~ "If you notice the sound card displayed is not the one that is actually\n"
-#~ "present on your system, you can click on the button and choose another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "\"%s\" die bespeurde klankkaart op u rekenaar sal hier vertoon word.\n"
-#~ "Indien die aangeduide klankkaart verskil van die werklike een op u\n"
-#~ "rekenaar,\n"
-#~ "kan u op die knoppie klik, om 'n ander drywer te kies."
-
-#~ msgid ""
-#~ "As a review, DrakX will present a summary of information it has about "
-#~ "your\n"
-#~ "system. Depending on your installed hardware, you may have some or all "
-#~ "of\n"
-#~ "the following entries. Each entry is made up of the configuration item "
-#~ "to\n"
-#~ "be configured, followed by a quick summary of the current configuration.\n"
-#~ "Click on the corresponding \"%s\" button to change that.\n"
-#~ "\n"
-#~ " * \"%s\": check the current keyboard map configuration and change it if\n"
-#~ "necessary.\n"
-#~ "\n"
-#~ " * \"%s\": check the current country selection. If you are not in this\n"
-#~ "country, click on the \"%s\" button and choose another one. If your "
-#~ "country\n"
-#~ "is not in the first list shown, click the \"%s\" button to get the "
-#~ "complete\n"
-#~ "country list.\n"
-#~ "\n"
-#~ " * \"%s\": By default, DrakX deduces your time zone based on the country\n"
-#~ "you have chosen. You can click on the \"%s\" button here if this is not\n"
-#~ "correct.\n"
-#~ "\n"
-#~ " * \"%s\": check the current mouse configuration and click on the button "
-#~ "to\n"
-#~ "change it if necessary.\n"
-#~ "\n"
-#~ " * \"%s\": clicking on the \"%s\" button will open the printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
-#~ "\n"
-#~ " * \"%s\": if a sound card is detected on your system, it is displayed\n"
-#~ "here. If you notice the sound card displayed is not the one that is\n"
-#~ "actually present on your system, you can click on the button and choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"%s\": by default, DrakX configures your graphical interface in\n"
-#~ "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click "
-#~ "on\n"
-#~ "\"%s\" to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"%s\": if a TV card is detected on your system, it is displayed "
-#~ "here.\n"
-#~ "If you have a TV card and it is not detected, click on \"%s\" to try to\n"
-#~ "configure it manually.\n"
-#~ "\n"
-#~ " * \"%s\": if an ISDN card is detected on your system, it will be "
-#~ "displayed\n"
-#~ "here. You can click on \"%s\" to change the parameters associated with "
-#~ "the\n"
-#~ "card.\n"
-#~ "\n"
-#~ " * \"%s\": If you wish to configure your Internet or local network "
-#~ "access\n"
-#~ "now.\n"
-#~ "\n"
-#~ " * \"%s\": this entry allows you to redefine the security level as set in "
-#~ "a\n"
-#~ "previous step ().\n"
-#~ "\n"
-#~ " * \"%s\": if you plan to connect your machine to the Internet, it's a "
-#~ "good\n"
-#~ "idea to protect yourself from intrusions by setting up a firewall. "
-#~ "Consult\n"
-#~ "the corresponding section of the ``Starter Guide'' for details about\n"
-#~ "firewall settings.\n"
-#~ "\n"
-#~ " * \"%s\": if you wish to change your bootloader configuration, click "
-#~ "that\n"
-#~ "button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"%s\": here you'll be able to fine control which services will be "
-#~ "run\n"
-#~ "on your machine. If you plan to use this machine as a server it's a good\n"
-#~ "idea to review this setup."
-#~ msgstr ""
-#~ "DrakX sal u 'n oorsig bied van u rekenaar se inligting. Afhangende van "
-#~ "die\n"
-#~ "sagteware wat u geïnstalleer het, sal u sommige of al die volgende\n"
-#~ "afdelings hê. Elke inskrywing bestaan uit die item wat gekonfigureer\n"
-#~ "moet word, asook 'n kernopsomming oor die huidige stand.\n"
-#~ "Klik op die ooreenkomstige \"%s\"-knoppie om dit te verander.\n"
-#~ "\n"
-#~ " * \"%s\": bekyk die huidige sleutelbord-uitleg en verander indien "
-#~ "nodig.\n"
-#~ "\n"
-#~ " * \"%s\": bekyk die huidige keuse van u land. Indien u nie in hierdie "
-#~ "land\n"
-#~ "woon nie, klik op die \"%s\"-knoppie om 'n ander te kies. Sou dit nie in\n"
-#~ "die lys wees nie, klik op die \"%s\"-knoppie vir 'n volledige lys.\n"
-#~ "\n"
-#~ " *\"%s\": By verstek word u tydsone aangepas, afhangende van die land\n"
-#~ "wat u kies. Klik op die \"%s\"-knoppie indien dit verkeerd is.\n"
-#~ "\n"
-#~ " * \"%s\": ondersoek die huidige muiskonfigurasie en klik op die knoppie\n"
-#~ "on dit te verander.\n"
-#~ "\n"
-#~ " * \"%s\": deur op die \"%s\"-knoppie te klik, sal u die drukker-"
-#~ "assistent\n"
-#~ "loods. Raadpleeg die ooreenkomstige hoofstuk in die \"Starter Guide\"\n"
-#~ "vir meer inligting daaroor.\n"
-#~ "\n"
-#~ " * \"%s\": sou ons 'n klankkaart opspoor op die rekenaar, sal dit hier\n"
-#~ "vertoon word. Indien u verskil van ons keuse, klik op die knoppie om\n"
-#~ "'n ander drywer te kies.\n"
-#~ "\n"
-#~ " * \"%s\": DrakX stel u skerm op met 'n resolusie van \"800x600\"\n"
-#~ " of \"1024x768\" by verstek. Indien u wil verander, kan u \"%s\"\n"
-#~ "kies om dit te herkonfigureer.\n"
-#~ "\n"
-#~ " * \"%s\": indien 'n TV-kaart opgespoor is, sal dit hier vertoon. "
-#~ "Inidien\n"
-#~ "nie, en u het wel een, klik op \"%s\" om dit self op te stel.\n"
-#~ "\n"
-#~ " * \"%s\":  indien 'n ISDN-kaart opgespoor is, sal dit hier vertoon. "
-#~ "Klik\n"
-#~ "op \"%s\" om verstellings daarop aan te bring\n"
-#~ "\n"
-#~ " * \"%s\": Indien u die netwerk en Internet toegang nou wil opstel\n"
-#~ "\n"
-#~ " * \"%s\": hier kan u die sekuriteitsvlak verander wat in 'n vorige "
-#~ "stap \n"
-#~ "opgestel is.\n"
-#~ "\n"
-#~ " * \"%s\": Indien die masjien toegang tot die Internet sal hê, kan u "
-#~ "gerus\n"
-#~ "u rekenaar beskem teen die hansworse daar buite, deur 'n vuurmuur op te\n"
-#~ "stel. Lees gerus meer daaroor op in die \"Starter Guide\"\n"
-#~ "\n"
-#~ " * \"%s\": indien u die herlaaistelsel se konfigurasie wil verander. "
-#~ "Word\n"
-#~ "meer vir slimkoppe aanbeveel.\n"
-#~ "\n"
-#~ " * \"%s\": hier kan u fyner verstellings maak op die dienste wat sal "
-#~ "afskop\n"
-#~ "Ondersoek dit gerus indien u die rekenaar as bediener gaan gebruik."
-
-#~ msgid ""
-#~ "No ethernet network adapter has been detected on your system.\n"
-#~ "I cannot set up this connection type."
-#~ msgstr ""
-#~ "Geen ethernetkaart is op die stelsel gevind nie.\n"
-#~ "Ek kan nie hierdie tipe konneksie opstel nie."
-
-#~ msgid ""
-#~ "Please choose which network adapter you want to use to connect to "
-#~ "Internet."
-#~ msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die Internet."
-
-#~ msgid ""
-#~ "To submit a bug report, click on the button report.\n"
-#~ "This will open  a web browser window on %s\n"
-#~ " where you'll find a form to fill in.  The information displayed above "
-#~ "will be \n"
-#~ "transferred to that server."
-#~ msgstr ""
-#~ "Klik die 'Verslag' knoppie, indien u 'n foutverslag wil instuur.\n"
-#~ "Dit sal die blaaier oopmaak op %s\n"
-#~ "en 'n vorm om in te vul aan u toon. Die bogenoemde inligting\n"
-#~ "sal na daardie bediener gestuur word."
-
-#~ msgid ""
-#~ "To submit a bug report, click the report button, which will open your "
-#~ "default browser\n"
-#~ "to Anthill where you will be able to upload the above information as a "
-#~ "bug report."
-#~ msgstr ""
-#~ "Klik die 'Verslag' knoppie, indien u 'n foutverslag wil instuur.\n"
-#~ "Dit sal die blaaier oopmaak by 'Anthill' waar u bogenoemde inligting\n"
-#~ "na kan oplaai."
-
-#~ msgid ""
-#~ "Here, you can setup the security level and administrator of your "
-#~ "machine.\n"
-#~ "\n"
-#~ "\n"
-#~ "The Security Administrator is the one who will receive security alerts if "
-#~ "the\n"
-#~ "'Security Alerts' option is set. It can be a username or an email.\n"
-#~ "\n"
-#~ "\n"
-#~ "The Security Level menu allows you to select one of the six preconfigured "
-#~ "security levels\n"
-#~ "provided with msec. These levels range from poor security and ease of "
-#~ "use, to\n"
-#~ "paranoid config, suitable for very sensitive server applications:\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-#~ "very\n"
-#~ "easy to use security level. It should only be used for machines not "
-#~ "connected to\n"
-#~ "any network and that are not accessible to everybody.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-#~ "security\n"
-#~ "recommended for a computer that will be used to connect to the Internet "
-#~ "as a\n"
-#~ "client.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">High</span>: There are already some\n"
-#~ "restrictions, and more automatic checks are run every night.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-#~ "enough\n"
-#~ "to use the system as a server which can accept connections from many "
-#~ "clients. If\n"
-#~ "your machine is only a client on the Internet, you should choose a lower "
-#~ "level.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-#~ "previous\n"
-#~ "level, but the system is entirely closed and security features are at "
-#~ "their\n"
-#~ "maximum"
-#~ msgstr ""
-#~ "Hier kan u die vlak administrasie van sekuriteit op u rekenaar opstel.\n"
-#~ "\n"
-#~ "\n"
-#~ "Die Sekuriteits-administrateur sal die sekuriteits-waarskuwings ontvang\n"
-#~ "indien\n"
-#~ "die 'Sekuriteits-waarskuwings' opsie gekies is. Dit kan 'n gebruikernaam "
-#~ "of\n"
-#~ "'n e-pos adres wees.\n"
-#~ "\n"
-#~ "\n"
-#~ "Die Sekuriteitsvlak-kieslys stel u in staat om een van ses vooraf-"
-#~ "opgestelde\n"
-#~ "vlakke te kies.\n"
-#~ "Hierdie vlakke wissel van ligte sekuriteit en maklike gebruik tot "
-#~ "paranoïes,\n"
-#~ "wat geskik is vir uiters sensitiewe toepassings.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Lig</span>: Hierdie is glad nie veilig "
-#~ "nie,\n"
-#~ "alhoewel dit rekenaargebruik vergemaklik.\n"
-#~ "Gebruik dit op masjiene wat nie aan 'n netwerk gekoppel is nie,\n"
-#~ "en nie toeganklik tot almal is nie.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Standaard</span>: Hierdie is die "
-#~ "standaard\n"
-#~ "sekuriteit\n"
-#~ "wat ons aanbeveel vir rekenaars wat aan die Internet gebruik as 'n "
-#~ "kliënt\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Hoog</span>:Daar is reeds versperrings, "
-#~ "en\n"
-#~ "meer outomatise toetse word saans gedoen\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Hoër</span>: Met hierdie sekuriteitsvlak "
-#~ "kan\n"
-#~ "u stelsel as 'n bediener gebruik.\n"
-#~ "Die sekuriteit is goed genoeg sodat die rekenaar konneksies van kliënte\n"
-#~ "af kan aanvaar.\n"
-#~ "Aandag: Indien u masjien bloot 'n  kliënt op die Internet is, kan u 'n "
-#~ "laer\n"
-#~ "vlak kies.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Paranoïes</span>: Soortgelyk aan die "
-#~ "vorige\n"
-#~ "vlak, maar die rekenaar is totaal toe en sekuriteit is op sy\n"
-#~ "maksimum"
-
-#~ msgid "chunk size"
-#~ msgstr "blokgrootte"
-
-#~ msgid "Chunk size %s\n"
-#~ msgstr "Blokgrootte %s\n"
-
-#~ msgid "Can not add a partition to _formatted_ RAID md%d"
-#~ msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
-
-#~ msgid "mkraid failed (maybe raidtools are missing?)"
-#~ msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
-
-#~ msgid "mkraid failed"
-#~ msgstr "mkraid het gefaal"
-
-#~ msgid "<b>Mandrake Control Center</b>"
-#~ msgstr "<b>Mandrake Control Center</b>"
-
-#~ msgid ""
-#~ "The Mandrake Control Center is an essential collection of Mandrake-"
-#~ "specific utilities for simplifying the configuration of your computer."
-#~ msgstr ""
-#~ "Die \"Mandrake Control Center\" is 'n versameling nutsprogramme wat die "
-#~ "opstel van u rekenaar vergemaklik."
-
-#~ msgid ""
-#~ "Find all Mandriva products and services at <b>MandrakeStore</b> -- our "
-#~ "full service e-commerce platform."
-#~ msgstr ""
-#~ "Hier kan u alle Mandriva produkte en dienste vind. <b>MandrakeStore</b> --"
-#~ "ons ten volle toegeruste e-handel platvorm."
-
-#~ msgid "Become a <b>MandrakeClub</b> member!"
-#~ msgstr "Sluit aan by die <b><MandrakeClub!</b>"
-
-#~ msgid ""
-#~ "Take advantage of valuable benefits, products and services by joining "
-#~ "MandrakeClub, such as:"
-#~ msgstr ""
-#~ "Hierdie is meer as net 'n gemeenskap, hier kry u ekstra waarde deur "
-#~ "produkte en dienste wat die volgende insluit:"
-
-#~ msgid ""
-#~ "\t* Special download mirror list exclusively for MandrakeClub Members"
-#~ msgstr ""
-#~ "\t* Spesiale spieel bedieners wat uitsluitlik vir \"MandrakeClub\" se "
-#~ "lede is"
-
-#~ msgid "\t* Special discounts for products and services at MandrakeStore"
-#~ msgstr "\t* Spesiale afslag vir produkte en dienste by \"MandrakeStore\""
-
-#~ msgid ""
-#~ "\t* Find out Mandriva Linux on a bootable CD with <b>Mandriva Move</b>"
-#~ msgstr ""
-#~ "\t* Vind uit oor Mandriva Linux op 'n selflaai CD - <b>Mandriva Move</b>"
-
-#~ msgid ""
-#~ "Find all Mandriva products at <b>MandrakeStore</b> -- our full service e-"
-#~ "commerce platform."
-#~ msgstr ""
-#~ "Mandriva se produkte is by <b>MandrakeStore</b> -- ons volledige e-handel "
-#~ "winkel."
-
-#~ msgid "<b>Become a MandrakeClub member!</b>"
-#~ msgstr "<b>Word 'n lid van die MandrakeClub!</b>"
-
-#~ msgid ""
-#~ "In the Mandriva Linux menu you will find easy-to-use applications for all "
-#~ "tasks:"
-#~ msgstr ""
-#~ "Die kieslys in Mandriva Linux het gebruikersvriendelike programme vir "
-#~ "alle behoefdes:"
-
-#~ msgid ""
-#~ "\t* Take charge of your personal data with the integrated personal "
-#~ "information suites: <b>Kontact</b> and <b>Evolution</b>"
-#~ msgstr ""
-#~ "\t* Kry beheer oor u persoonlike data met die geïntegreerde e-pos "
-#~ "programme:<b>Kontak</b> en <b>Evolution</b>"
-
-#~ msgid ""
-#~ "\t* <b>XEmacs</b>: open source text editor and application development "
-#~ "system"
-#~ msgstr "\t* <b>XEmacs</b>: oopbron redigeerder en ontwikkelings program."
-
-#~ msgid ""
-#~ "\t* <b>Vim</b>: advanced text editor with more features than standard Vi"
-#~ msgstr ""
-#~ "\t* <b>Vim</b>: gevorderde redigeerder met ekstras bo die standaard Vi"
-
-#~ msgid ""
-#~ "[OPTIONS]...\n"
-#~ "Mandriva Terminal Server Configurator\n"
-#~ "--enable         : enable MTS\n"
-#~ "--disable        : disable MTS\n"
-#~ "--start          : start MTS\n"
-#~ "--stop           : stop MTS\n"
-#~ "--adduser        : add an existing system user to MTS (requires "
-#~ "username)\n"
-#~ "--deluser        : delete an existing system user from MTS (requires "
-#~ "username)\n"
-#~ "--addclient      : add a client machine to MTS (requires MAC address, IP, "
-#~ "nbi image name)\n"
-#~ "--delclient      : delete a client machine from MTS (requires MAC "
-#~ "address, IP, nbi image name)"
-#~ msgstr ""
-#~ "[OPTIONS]...\n"
-#~ "Mandriva Terminal Server Configurator\n"
-#~ "--enable         : enable MTS\n"
-#~ "--disable        : disable MTS\n"
-#~ "--start          : start MTS\n"
-#~ "--stop           : stop MTS\n"
-#~ "--adduser        : add an existing system user to MTS (requires "
-#~ "username)\n"
-#~ "--deluser        : delete an existing system user from MTS (requires "
-#~ "username)\n"
-#~ "--addclient      : add a client machine to MTS (requires MAC address, IP, "
-#~ "nbi image name)\n"
-#~ "--delclient      : delete a client machine from MTS (requires MAC "
-#~ "address, IP, nbi image name)"
-
-#~ msgid ""
-#~ "This interface has not been configured yet.\n"
-#~ "Run the \"Add an interface\" assistant from the Mandrake Control Center"
-#~ msgstr ""
-#~ "Hierdie koppelvlak is nog nie opgestel nie.\n"
-#~ "Loods die \"Add an interface\"-assistent vanuit die Mandrake Control "
-#~ "Center"
-
-#~ msgid "Mandrake Tools Logs"
-#~ msgstr "Mandrake Tools Logs"
-
-#~ msgid "The alert wizard had unexpectly failled:"
-#~ msgstr "Die waarsku wysgeer het onverwags gestop:"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Probleme met die Konneksie\n"
-#~ "Maak tog seker van u konfigurasie in die 'Mandrake Control Center'."
-
-#~ msgid "The package %s is needed. Install it?"
-#~ msgstr "Pakket %s word benodig. Moet ons installeer?"
-
-#~ msgid "ignore"
-#~ msgstr "ignoreer"
-
-#~ msgid "no"
-#~ msgstr "nee"
-
-#~ msgid "yes"
-#~ msgstr "ja"
-
-#~ msgid "SILO Installation"
-#~ msgstr "SILO installasie"
-
-#~ msgid "First sector of boot partition"
-#~ msgstr "Eerste sektor van herlaaipartisie"
-
-#~ msgid "Bootloader installation"
-#~ msgstr "Installasie van herlaaistelsel"
-
-#~ msgid "SILO"
-#~ msgstr "SILO"
-
-#~ msgid "Alcatel speedtouch usb"
-#~ msgstr "Alcatel speedtouch usb"
-
-#~ msgid "Sagem (using pppoa) usb"
-#~ msgstr "Sagem (gebruik pppoa) usb"
-
-#~ msgid ""
-#~ "Enter a Zeroconf host name which will be the one that your machine will "
-#~ "get back to other machines on the network:"
-#~ msgstr ""
-#~ "Voorsien 'n Zeroconf rekenaarnaam, dit sal die een wees wat u masjien aan "
-#~ "die ander rekenaars op die netwerk sal verskaf:"
-
-#~ msgid "Harddrake2 version %s"
-#~ msgstr "Harddrake2 weergawe %s"
-
-#~ msgid "transmitted"
-#~ msgstr "reeds versend"
-
-#~ msgid "received"
-#~ msgstr "reeds ontvang"
-
-#
-#~ msgid ""
-#~ "You can export using NFS or Samba. Please select which you'd like to use."
-#~ msgstr ""
-#~ "U kan uitvoer deur NFS of Samba te gebruik. Kies watter u wil gebruik."
-
-#
-#~ msgid "The package %s is going to be removed."
-#~ msgstr "Pakket %s gaan verwyder word"
-
-#~ msgid "You must be root to read configuration file. \n"
-#~ msgstr "Om die konfigurasielêer te lees, moet u 'root' wees.\n"
-
-#~ msgid "Can not open %s!"
-#~ msgstr "Kan nie %s oopmaak nie!"
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "U videokaart kan slegs 3D-versnelling onder Xorg %s ondersteun.\n"
-#~ "DIt word wel onder Xorg %s ondersteun wat dalk beter\n"
-#~ "2D-ondersteuning het."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s,\n"
-#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 "
-#~ "%s\n"
-#~ "bied,\n"
-#~ "MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
-#~ "U kaart word deur Xorg %s ondersteun, wat beter 2D-ondersteuning bied."
-
-#~ msgid "Xpmac (installation display driver)"
-#~ msgstr "Xpmac (installasievertoondrywer)"
-
-#~ msgid "4 billion colors (32 bits)"
-#~ msgstr "4 biljoen kleure (32 bis)"
-
-#~ msgid "XFree86 server: %s\n"
-#~ msgstr "XFree86 bediener: %s\n"
-
-#~ msgid "Here is the full list of keyboards available"
-#~ msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#~ msgid "Please insert the Boot floppy used in drive %s"
-#~ msgstr "Plaas die herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#~ msgid ""
-#~ "Take advantage of valuable benefits, products and services by joining "
-#~ "Mandriva Club, such as:"
-#~ msgstr "Slaan munt uit die voordele wat Mandriva Club u bied, dinge soos:"
-
-#~ msgid "TCP/IP"
-#~ msgstr "TCP/IP"
-
-#~ msgid "Wireless"
-#~ msgstr "Draadloos"
-
-#~ msgid ""
-#~ "Due to incompatibilities of the 2.6 series kernel with the LSB runtime\n"
-#~ "tests, the 2.4 series kernel will be installed as the default to insure\n"
-#~ "compliance under the \"LSB\" group selection."
-#~ msgstr ""
-#~ "As gevolg van versoenbaarheidsprobleme tussen die 2.6 kernel\n"
-#~ "en die LSB toetse, sal 'n 2.4 reeks kernel by verstek installeer. Dit\n"
-#~ "verseker versoenbaarheid met die LSB-groep seksie."
-
-#~ msgid "XawTV is not installed!"
-#~ msgstr "XawTV in nie geïnstalleer nie"
-
-#~ msgid "Provider dns 1 (optional)"
-#~ msgstr "Voorsiener DNS 1 (opsioneel)"
-
-#~ msgid "Provider dns 2 (optional)"
-#~ msgstr "Voorsiener DNS 2 (opsioneel)"
-
-#~ msgid "DHCP Client"
-#~ msgstr "DHCP-Kliënt"
-
-#~ msgid "Display"
-#~ msgstr "Vertoon"
-
-#~ msgid "Display configuration"
-#~ msgstr "Vertoon konfigurasie"
-
-#~ msgid "Use tar and bzip2 (rather than tar and gzip)"
-#~ msgstr "Geberuik tar en bzip2 (instede van tar en gzip)"
-
-#~ msgid ""
-#~ "Change\n"
-#~ "Restore Path"
-#~ msgstr ""
-#~ "Verander\n"
-#~ "Herstelroete"
-
-#~ msgid "European protocol"
-#~ msgstr "Europese protokol"
-
-#~ msgid "Found \"%s\" interface do you want to use it ?"
-#~ msgstr "Het \"%s\"-koppelvlak gevind, wil u dit gebruik?"
-
-#~ msgid "Bewan USB modem"
-#~ msgstr "Bewan USB-modem"
-
-#~ msgid "What kind is your ISDN connection?"
-#~ msgstr "Watter tipe is u ISDN-konneksie?"
-
-#~ msgid "Do you want to start a new configuration ?"
-#~ msgstr "Wil u 'n nuwe konfigurasie begin ?"
-
-#~ msgid ""
-#~ "I have detected an ISDN PCI card, but I do not know its type. Please "
-#~ "select a PCI card on the next screen."
-#~ msgstr ""
-#~ "Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies "
-#~ "asb.'n PCI-kaart op die volgende skerm."
-
-#~ msgid "No ISDN PCI card found. Please select one on the next screen."
-#~ msgstr ""
-#~ "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
-
-#~ msgid "DrakTermServ"
-#~ msgstr "DrakTermServ"
-
-#~ msgid "Under Devel ... please wait."
-#~ msgstr "Onder Ontwikkeling... wag asseblief."
-
-#~ msgid "Windows (FAT32)"
-#~ msgstr "Windows (FAT32)"
-
-#~ msgid ""
-#~ "Please enter the name of the interface connected to the "
-#~ "internet.              \n"
-#~ "                \n"
-#~ "Examples:\n"
-#~ "                ppp+ for modem or DSL connections, \n"
-#~ "                eth0, or eth1 for cable connection, \n"
-#~ "                ippp+ for a isdn connection.\n"
-#~ msgstr ""
-#~ "Voorsien asseblief die koppelvlak-naam wat verbind is aan die Internet.\n"
-#~ "                 \n"
-#~ "Voorbeelde:\n"
-#~ "               ppp+ vir modem of DSL konneksies, \n"
-#~ "               eth0, or eth1 vir kabel konneksies, \n"
-#~ "               ippp+ vir 'n isdn konneksie.\n"
-
-#~ msgid ""
-#~ "If you plan to use aboot, be carefull to leave a free space (2048 sectors "
-#~ "is enough)\n"
-#~ "at the beginning of the disk"
-#~ msgstr ""
-#~ "Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-#~ "van die skyf. (2048 sektors is genoeg)."
-
-#~ msgid "I can not add any more partition"
-#~ msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#~ msgid "No wireless network adapter on your system!"
-#~ msgstr "Daar is geen draadlose netwerkkaart op hierdie rekenaar nie!"
-
-#~ msgid ""
-#~ "Here you can choose whether the printers connected to this machine should "
-#~ "be accessable by remote machines and by which remote machines."
-#~ msgstr ""
-#~ "Hier kan u kies of die drukkers wat aan hierdie masjien beskikbaar sal "
-#~ "wees aan eksterne rekenaars en watter rekenaars dit sal wees."
-
-#~ msgid ""
-#~ "The network configuration done during the installation cannot be started "
-#~ "now. Please check whether the network is accessable after booting your "
-#~ "system and correct the configuration using the %s Control Center, section "
-#~ "\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-#~ "also using the %s Control Center, section \"Hardware\"/\"Printer\""
-#~ msgstr ""
-#~ "Die netwerk, soos opgestel gedurende die installasie, kom nie aan die "
-#~ "gang nie. Maak tog seker die netwerk is tot u beskikking, en gaan u "
-#~ "konfigurasie na deur die '%s Control Center' te gebruik. Die seksie "
-#~ "\"Network & Internet\"/ \"Connection\", daarna kan u die drukker opstel, "
-#~ "deur die %s Control Center se seksie \"Hardware\"/\"Printer\" te kies."
-
-#~ msgid ""
-#~ "You are about to install the printing system %s on a system running in "
-#~ "the %s security level.\n"
-#~ "\n"
-#~ "This printing system runs a daemon (background process) which waits for "
-#~ "print jobs and handles them. This daemon is also accessable by remote "
-#~ "machines through the network and so it is a possible point for attacks. "
-#~ "Therefore only a few selected daemons are started by default in this "
-#~ "security level.\n"
-#~ "\n"
-#~ "Do you really want to configure printing on this machine?"
-#~ msgstr ""
-#~ "U gaan nou die %s drukkerstelsel installeer op 'n rekenaar wat in die %s "
-#~ "sekuriteitsvlak is.\n"
-#~ "\n"
-#~ "Die drukkerstelsel loop 'n daemoon (agtergrond proses) wat wag vir "
-#~ "drukwerk en dit dan doen. Hierdie daemoon kan bereik word deur ander "
-#~ "rekenaars op die netwerk, so dit kan 'n swakpunt in die sekuriteit van u "
-#~ "rekenaar wees. Die reel is dat hoe minder van hierdie daemone loop, hoe "
-#~ "meer veilig is u rekenaar , maar u moet dit ook kan gebruik!\n"
-#~ "\n"
-#~ "Wil u drukkers opstel op hierdie rekenaar?"
-
-#~ msgid ""
-#~ "This uses the same syntax as the command line program 'cdrecord'. "
-#~ "'cdrecord -scanbus' would also show you the device number."
-#~ msgstr ""
-#~ "Hierdie een gebruik dieselfde sintaksis as die program 'cdrecord', "
-#~ "'cdrecord - scanbus' sal ook aan u die toestelnommer vertoon."
-
-#~ msgid "Can not create log file!"
-#~ msgstr "Kan nie staaflêer skep nie!"
-
-#~ msgid ""
-#~ "Enter your CD Writer device name\n"
-#~ " ex: 0,1,0"
-#~ msgstr ""
-#~ "Voorsien u CD-skrywer se toestelnaam\n"
-#~ " bv: 0,1,0"
-
-#~ msgid "dhcp"
-#~ msgstr "dhcp"
-
-#~ msgid "Tone dialing"
-#~ msgstr "Toon-skakel"
-
-#~ msgid "Pulse dialing"
-#~ msgstr "Puls skakel"
-
-#~ msgid ""
-#~ "Here you can choose whether the scanners connected to this machine should "
-#~ "be accessable by remote machines and by which remote machines."
-#~ msgstr ""
-#~ "Hier kan u kies of skandeerders wat aan hierdie rekenaar gekoppel is "
-#~ "toeganklik sal wees vir eksterne masjiene, asook watter masjiene."
-
-#~ msgid "Scientific Workstation"
-#~ msgstr "Wetenskaplike Werkstasie"
-
-#~ msgid "Scientific applications such as gnuplot"
-#~ msgstr "Wetenskaplike programme soos gnuplot"
-
-#~ msgid "Please select media for backup..."
-#~ msgstr "Kies asb. 'n media vir die rugsteun..."
-
-#~ msgid "Configuration of a remote printer"
-#~ msgstr "Konfigurasie van eksterne drukker"
-
-#~ msgid "Gnome Workstation"
-#~ msgstr "Gnome Werkstasie"
-
-#~ msgid "Running \"%s\" ..."
-#~ msgstr "Loop \"%s\" ..."
-
-#~ msgid "utopia 25"
-#~ msgstr "utopia 25"
-
-#~ msgid "On Hard Drive"
-#~ msgstr "Op hardeskyf"
-
-#~ msgid "Messages"
-#~ msgstr "Boodskappe"
-
-#~ msgid "Syslog"
-#~ msgstr "Syslog"
-
-#~ msgid "Compact"
-#~ msgstr "Kompak"
diff --git a/perl-install/share/po/am.po b/perl-install/share/po/am.po
deleted file mode 100644
index 938731183..000000000
--- a/perl-install/share/po/am.po
+++ /dev/null
@@ -1,23262 +0,0 @@
-# Latest versions of po files are at http://www.mandrivalinux.com/l10n/am.php3
-# Copyright (C) 2004 Mandriva SA
-# Alemayehu Gemeda <alemayehu@gmx.at>, 2004.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2004-06-01 03:36+0100\n"
-"Last-Translator: Alemayehu <alemayehu@gmx.at>\n"
-"Language-Team: Amharic <am-translate@geez.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../move/move.pm:292
-#, fuzzy, c-format
-msgid "Which USB key do you want to format?"
-msgstr "ምን ማድረግ ይፈልጋሉ?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "ቁልፍ ሊጻፍበት አይችልም"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "እንደገና ሞክር"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "ያለ USB ቁልፍ ቀጥል"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "እንደገና ጀምር"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "ዳታዎትን ለማስቀመጥ ቁልፍ ያስፈልጋል"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "የUSB ቁልፍ እንደገና ተፈልጎ ተገኝቷል"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "የUSB ቁልፍ ማቀናጀት"
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "እባክዎን ይጠብቁ፣ መሳሪያዎችን ፈልጎ በማግኘት እና በማስተካከል ላይ ነው..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "በራስ-ገዝ ምርጫ"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "እባክዎ ይጠብቁ፣ መሳሪያዎችን ፈልጎ በማግኘት እና በማስተካከል ላይ ነው..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "ስህተት"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "ስህተት ተፈጥሯል"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "የሲስተም ማስተካከያ ፍይሎችን አስወግድ"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "በቀላሉ እንደገና አስጀምር"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "እነዚህን ፕሮግራሞች አቋርጥ"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "የሲዲ-ሮም ድጋፍ የለም"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "በጥንቃቄ ያንብቡ!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB ወይም ከዚህ በላይ"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X ሰርቨር"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "የX ሰርቨር ይምረጡ"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Multi-head ምርጫ"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "%s የXorg ጥቅልን መትከል አልተቻለም"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr ""
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "የXFree ማስተካከያ"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "የትኛውን የXFree ምርጫ እንዲኖሮት ይፈልጋሉ?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr ""
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "የXinerama ቅጥያዎችን ተጠቀም"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "ካርድ ብቻ አስተካክል \"%s\"%s"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr ""
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr ""
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "ምርጫ"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "ውጣ"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "የንድፍ ካርድ"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr ""
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "ጽናት"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "ሙከራ"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "ምርጫዎች"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr ""
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "ሞኒተር ይምረጡ"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "ሰክተው ይጫወቱ"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "አጠቃላይ"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr ""
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr ""
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 ቀለሞች (8 bits)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ሺ ቀለሞች (15 bits)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ሺ ቀለሞች (16 bits)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 ሚሊዮን ቀለሞች (24 bits)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "ሌላ"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr ""
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "የንድፎ ካርድ: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "እሺ"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "ተወው"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "እርዳታ"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "የምርጫው ሙከራ"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "ምርጫውን መሞከር ይፈልጋሉ?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ማስጠንቀቂያ: ይህንን የንድፍ ካርድ ሲሞክሩ፤ ኮምፒውተሮ በድንገት ሊቆም ይችላል"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "በ%d ሴኮንዶች ውስጥ በመውጣት ላይ"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "ይህ ትክክለኛ ምርጫ ነው?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "የመተየቢያ አቀራረብ: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "የመጠቆሚያው ዓይነት: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "የመጠቆሚያ መሳሪያ: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr ""
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr ""
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr ""
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "የንድፍ ካርድ: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "የንድፍ ማስታወሻ: %s kB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "የቀለም ወሰን፦ %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr ""
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr ""
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "የመነሻ ላይ ንድፈ እይታ"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr ""
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "እባክዎ ይጠብቁ"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "የአስጀማሪ ተከላ በመከናወን ላይ"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr ""
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr ""
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr ""
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "ፍሎፒ ላይ"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "ዝለል"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "የLILO/grub ተከላ"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "አስጀማሪውን የት መትከል ይፈልጋሉ?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "የአጀማመር ዘይቤ ምርጫ"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "የአስጀማሪ ዋና ምርጫዎች"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr ""
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "ሚስጢራዊ ቃላቱ አይመሳሰሉም"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "እባክዎ እንደገና ይሞክሩ"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "ጥቅም ላይ የሚውለው አስጀማሪ"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "የመጀመሪያ መሳሪያ"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr ""
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "ACPI አስቻል"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "APIC እንዳይኖር አስገድድ"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr ""
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "ሚስጢራዊ ቃል"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "ሚስጢራዊ ቃል (እንደገና)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "የትእዛዝ መስመር ምርጫዎችን ወስን"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "ወስን"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "በየጅማሬው /tmpን አጽዳ"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr ""
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "መልዕክት አስጀምር"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "የFirmware አዘግይ ክፈት"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "ከዲሲ ማስጀመር አስችል?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "ቀዳሚ OS?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "ምስል"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Root"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr ""
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "የቪዲዮ አሰራር ዘዴ"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr ""
-
-#: any.pm:372
-#, fuzzy, c-format
-msgid "Network profile"
-msgstr "የተጠቃሚው እይታ"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "መለያ"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "ቀዳሚ"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr ""
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr ""
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr ""
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr ""
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr ""
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr ""
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "ሊኑክስ"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "ሌሎች የመጠቀሚያ ዜዴዎች (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "ሌሎች የመጠቀሚያ ዜዴዎች (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "ሌሎች የመጠቀሚያ ዜዴዎች (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "የX ፕሮግራሞች ማሳያ"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr ""
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "ፍቀድ \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr ""
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr ""
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr ""
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s በፊት ተጨምሯል)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "ይህ ሚስጢራዊ ቃል በጣም ቀላል ነው"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "እባክዎ የተጠቃሚ ስም ይስጡ"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "የተጠቃሚ ስሙ በጣም ረጅም ነው"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "ይህ የተጠቃሚ ስም በፊትም ነበር"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "ተጠቃሚ ጨምር"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"የተጠቃሚ ስም ያስገቡ\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "ጨርሷል"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "ተጠቃሚ ተቀበል"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "እውነተኛ ስም"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, fuzzy, c-format
-msgid "Login name"
-msgstr "Name=ዝምብለህ ይግባ"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "ሼል"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "ምልክት"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr ""
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "ይህንን ሁኔታ መጠቀም ይፈልጋሉ?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "አዎ"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "አይ"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "ቀዳሚ ተጠቃሚ ይምረጡ:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr ""
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "እባክዎ መጠቀሚያ ቋንቋ ይምረጡ።"
-
-#: any.pm:707
-#, fuzzy, c-format
-msgid "Language choice"
-msgstr "የመመሪያ ገጾች"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "ዩኒኮድን በቀዳሚነት ተጠቀም"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "ሁሉንም ቋንቋዎች"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "ሀገር / አካባቢ"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "እባክዎ ሀገሮን ይምረጡ።"
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "እዚህ ያሉት ሀገሮች ሙሉ ዝርዝር ይገኛል"
-
-#: any.pm:798
-#, fuzzy, c-format
-msgid "Other Countries"
-msgstr "ሌላ ምርጫዎች"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "ጠላቂ"
-
-#: any.pm:806
-#, fuzzy, c-format
-msgid "Input method:"
-msgstr "የX ዘገባ የማስትገባት ዘዴ"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "ምንም"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "መጋራት የለም"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "ለሁሉም ተጠቃሚዎች ፍቀድ"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "userdrake አስጀምር"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "ዝጋ"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: authentication.pm:24
-#, fuzzy, c-format
-msgid "Local file"
-msgstr "የቅርብ ፋይሎች"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr ""
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "የWindows ዶሜን"
-
-#: authentication.pm:29
-#, fuzzy, c-format
-msgid "Active Directory with SFU"
-msgstr "አኃዞች (ከክፍተት ጋር)"
-
-#: authentication.pm:30
-#, fuzzy, c-format
-msgid "Active Directory with Winbind"
-msgstr "አኃዞች (ከክፍተት ጋር)"
-
-#: authentication.pm:56
-#, fuzzy, c-format
-msgid "Local file:"
-msgstr "የቅርብ ፋይሎች:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "የWindows ዶሜን:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, fuzzy, c-format
-msgid "Active Directory with SFU:"
-msgstr "አኃዞች (ከክፍተት ጋር)"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, fuzzy, c-format
-msgid "Active Directory with Winbind:"
-msgstr "አኃዞች (ከክፍተት ጋር)"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr ""
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "የLDAP ሰርቨር"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "ቀላል"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr ""
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr ""
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, fuzzy, c-format
-msgid "Authentication Active Directory"
-msgstr "የX ዘገባ የማስትገባት ዘዴ"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "ዶሜን"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "ሰርቨር"
-
-#: authentication.pm:115
-#, fuzzy, c-format
-msgid "LDAP users database"
-msgstr "ዳታቤዝ"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, fuzzy, c-format
-msgid "Password for user"
-msgstr "ሚስጥር-ቃል ያስፈልጋል"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "አገለባበጥ"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr ""
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "የNIS ዶሜን"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "የNIS ሰርቨር"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "የWindows ዶሜን ትክክለኝነቱን ማረጋጥ"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr ""
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "የዶሜን አስተዳዳሪ ሚስጢራዊ ቃል"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, fuzzy, c-format
-msgid "Default Idmap "
-msgstr "የነበረው _ሠሌዳ"
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-
-#: authentication.pm:172
-#, fuzzy, c-format
-msgid "Set administrator (root) password"
-msgstr "የroot ሚስጢራዊ ቃል ይምረጡ"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, fuzzy, c-format
-msgid "Authentication method"
-msgstr "የX ዘገባ የማስትገባት ዘዴ"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "ሚስጢራዊ ቃል የለም"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr ""
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO ከንድፈ መዘርዝር ጋር"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO ከጽሁፍ መዘርዝር ጋር"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "በ/boot ውስጥ በቂ ቦታ የለም"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr ""
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "አስጀማሪውን እንደገና ይትከሉ"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d ደቂቃዎች"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 ደቂቃ"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d ሴኮንዶች"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu ጠፍቷል"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper ጠፍቷል"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "ኦስትሪያ"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "አውስትሬሊያ"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "ቤልጄም"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "ብራዚል"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "ካናዳ"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "ስዊዘርላንድ"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "ኮስታሪካ"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "ቼክ ሪፑብሊክ"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "ጀርመን"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "ዴንማርክ"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "ኤስቶኒያ"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "ስፔን"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "ፊንላንድ"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "ፈረንሳይ"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "ግሪክ"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "ሀንጋሪ"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "አየርላንድ"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "እስራኤል"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "ጣሊያን"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "ጃፓን"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "ኔዘርላንድ"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "ኖርዌይ"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "ኒው ዚላንድ"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "ፖላንድ"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "ፖርቱጋል"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "ራሺያ"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "ስዊድን"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "ስሎቫኪያ"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "ታይላንድ"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "ታይዋን"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "ደቡብ አፍሪካ"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "አሜሪካ"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "አዲስ"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr ""
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr ""
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr ""
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "እባክዎ የWebDAV ሰርቨር URL ያስገቡ"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URLሉ በhttp:// ወይም በhttps:// መጀመር አለበት"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "ሰርቨር:"
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr ""
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "ምርጫዎች: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "ተግባር ይምረጡ"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "እባክዎ ክፋዩ ላይ ይጫኑ"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "ዝርዝሮች"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "ቋሚ ዲስኮችን አልተገኙም"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "ባዶ"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "የፋይል ሲስተም አይነቶች:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "በዚህ ፈንታ “%s”ን ይጠቀሙ"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "ፍጠር"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "አይነት"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "አጥፋ"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "በመጀመሪያ “Unmount”ን ይጠቀሙ"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "ሌላ ክፋይ ይምረጡ"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "ክፋይ ይምረጡ"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "ውጣ"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "ወደ ነበረበት መልስ"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr ""
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr ""
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "ለማንኛውም ቀጥል?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "ሳታስቀምጥ ውጣ"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr ""
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr ""
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "ሁሉንም ሰርዝ"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "በራስ-ገዝ አመልካች"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "ተጨማሪ"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "የቋሚ ዲስክ መረጃ"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr ""
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr ""
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "የክፋይ ሠንጠረዡን አስቀምጥ"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "የክፋይ ሠንጠረዡ ወደ ነበረበት መልስ"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "የክፋይ ሠንጠረዡን አድን"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "የክፋይ ሠንጠረዡን እንደገና ጫን"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr ""
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "ፋይል ይምረጡ"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr ""
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "ዝርዝር መረጃ"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "መጠን አስተካክል"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "ፎርማት"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "ወደ RAID ጨምር"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "ወደ LVM ጨምር"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "ከRAID አስወግድ"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "ከLVM አስወግድ"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "RAID ለውጥ"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "ዞሮ ለመመለስ ተጠቃም"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "አዲስ ክፋይ ፍጠር"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "ሴክተር ጀምር፦"
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "መጠን በMB:"
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "የፋይል ሲስተም አይነት: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "ምርጫ: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "የጉልሃዊ ይዞታ ስም"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "የዞሮ መመለሻ ፋይሉ ይወገድ?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "የክፋይ ዓይነት ለውጥ"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "የትኛውን የፋይል ሲስተም ይፈልጋሉ?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr ""
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr ""
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "%sን የት መትከል ይፈልጋሉ?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "መጠን በማስተካከል ላይ"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr ""
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "ይዚህ ክፋይ መጠነ ተስተካካይ አይደለም"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr ""
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "አዲሱን መጠን ይምረጡ"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "አዲስ መጠን በMB: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr ""
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "አዲስ"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr ""
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "የLVM ስም?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr ""
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr ""
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "የዞሮ መመለሻ ፋይል ስም: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "የፋይል ስም ይስጡ"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "ፋይሉ በፊትም ነበር። ልጠቀምበት?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "የተከላ ምርጫዎች"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr ""
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "መሳሪያ"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "ደረጃ"
-
-#: diskdrake/interactive.pm:1023
-#, fuzzy, c-format
-msgid "chunk size in KiB"
-msgstr "የፊደል ቅርጽ መጠን፦"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "ይጠንቀቁ: ይህ አሰራር አደገኛ ነው።"
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "ምን አይነት አከፋፈል?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr ""
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "ወደ አዲሱ ክፋይ ፋይሎችን አንቀሳቅስ"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "ፋይሎች ደብቅ"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr ""
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "%sን በመገልበጥ ላይ"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "%sን በማስወገድ ላይ"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "%s ከአሁን በኋላ %s በመባል ይታወቃል"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "መሳሪያ: "
-
-#: diskdrake/interactive.pm:1187
-#, fuzzy, c-format
-msgid "Devfs name: "
-msgstr "መሳሪያ: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "አይነት: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "ስም: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "ጀምር፦ ሴክተር %sን\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "መጠን: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ""
-
-#: diskdrake/interactive.pm:1209
-#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "CD ወደ"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "አልተስተካከለም\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1214
-#, fuzzy, c-format
-msgid "RAID %s\n"
-msgstr "URI፦"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"ዞሮ መመለሻ ፋይል(ሎች):\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "ደረጃ %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, fuzzy, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "የፊደል ቅርጽ መጠን፦"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "ዞሮ መመለሻ ፋይል ስም: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "ለንባብ ብቻ"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "መጠን፦ %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "መረጃ: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "የክፋይ ጠረጴዛ ዓይነት: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "በጣቢያ %d ID %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "የፋይል-ሲስተም ሚስጢራዊ ግልበጣ ቁልፍ"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr ""
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "የሚስጢራዊ ግልበጣ ቁልፍ"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "የሚስጢራዊ ግልበጣ ቁልፍ (እንደገና)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr ""
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "አይነት ለውጥ"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "የተጠቃሚው የአጠቃቀም ደረጃ ያስፈልጋል"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "የትኛው የተጠቃሚ ስም"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "ሌላ"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "የተጠቃሚ ስም"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "ሰርቨሮችን ፈልግ"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "አዲስ ሰርቨሮችን ፈልግ"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "ጥቅል %s ይፈለጋል። መትከል ይፈልጋሉ?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "ጥቅሎችን በመትከል ላይ..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "ጥቅሎችን በማስወገድ ላይ..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr ""
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "%sን በማጣራት ላይ"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%sን የመንቀል ስህተት: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "የስዋፕ ክፋይ %sን በማስቻል ላይ"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "ክፋይ %sን በማስተካከል ላይ"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "ፋይል %sን በመፍጠር እና በማስተካከል ላይ"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr ""
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s %sን ማስተካከል አልተሳካም"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr ""
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr ""
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "ለተራ ተጠቃሚዎች የመጻፍ ፈቃድ ስጥ"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "ለተራ ተጠቃሚዎች የንባብ ፈቃድ ብቻ ስጥ"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr ""
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "ከ/usr ጋር"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "ሰርቨር"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr ""
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr ""
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "የሚሰራ ነገር የለም"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "ፍሎፒ"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "ዚፕ"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "ዲስክ"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "ሲዲ-ሮም"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "ዲሲ/ዲቪዲ አቃጣይ ፕሮግራሞች"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "ዲቪዲ-ሮም"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "ቴፕ"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "የቪዲዮ ካርድ"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "የቲቪ ካርድ"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "ሌሎች የመገናኛ ብዙሃን መሳሪያዎች"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "የድምጽ ካርድ"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "ዌብ-ካም"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr ""
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "የISDN ማመጣጠኛዎች"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "የኢተርኔት ካርድ"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "ሞደም"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "የADSL ማመጣጠኛዎች"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "ማስታወሻ"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "የAGP ተቆጣጣሪዎች"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "ማተሚያ"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "ጆይ ስቲክ"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "የSATA ተቆጣጣሪዎች"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "የRAID ተቆጣጣሪዎች"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA ተቆጣጣሪዎች"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "የFirewire ተቆጣጣሪዎች"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "የPCMCIA ተቆጣጣዊዎች"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "የSCSI ተቆጣጣዊዎች"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "የUSB ተቆጣጣቂዎች"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "የUSB ፖርቶች"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "የSMBus ተቆጣጣሪዎች"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "ድልድዮች እና ሲስተም ተቆጣጣሪዎች"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "መተየቢያ"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "መጠቆሚያ"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr ""
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "ያልታወቀ/ሌሎች"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "ሲፒዩ #"
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "እባክዎ ይጠብቁ... ምርጫውን በስራ ላይ አያዋለ ነው"
-
-#: harddrake/sound.pm:227
-#, fuzzy, c-format
-msgid "No alternative driver"
-msgstr "ምንም "
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "የድምጽ ምርጫ"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr ""
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr ""
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "ማስጠንቀቂያ"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-
-#: harddrake/sound.pm:278
-#, fuzzy, c-format
-msgid "No open source driver"
-msgstr "ስለ የነፃው ሶፍትዌር መረጃ አሳይ"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-
-#: harddrake/sound.pm:282
-#, fuzzy, c-format
-msgid "No known driver"
-msgstr "(ስለ ቃላት አጻጻፍ አስተያየት የለም)"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
-
-#: harddrake/sound.pm:287
-#, fuzzy, c-format
-msgid "Unknown driver"
-msgstr "ያልታወቀ የሆሄያት ኮድ፦ "
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr ""
-
-#: harddrake/sound.pm:334
-#, fuzzy, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "የነሲብ URLን አታስችል"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "በራስ-ገዝ ፈልጎ አግኝ"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "ያልታወቀ|አጠቃላይ"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "የካርድ ሞዴል፦"
-
-#: harddrake/v4l.pm:313
-#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "የፋይሉ ዓይነት"
-
-#: harddrake/v4l.pm:314
-#, fuzzy, c-format
-msgid "Number of capture buffers:"
-msgstr "የአምዶቹን ቍጥር ለውጥ"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "የPLL ምርጫ"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "የሬዲዮ ድጋፍ"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "የሬዲዮ ድጋፍ አስቻል"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "ተቀበል"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "የተጠቃሚ ስም"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "የሚቀጥለው"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr ""
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "እድገት"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr ""
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "የነጠላ ጥቅል ምርጫ"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr ""
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "በX"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "ከመሰረታዊ ማስረጃ ጋር"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "በእውነት አነስተኛ ተከላ"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "ራስ-ገዛዊ ራስን መቻል"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "ለውጥ"
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "ለሀርድዌር ሰአት GMT ተመርጧል"
-
-#: help.pm:217
-#, fuzzy, c-format
-msgid "Automatic time synchronization"
-msgstr "ቀን እና ሰዓት"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "ነጻ ቦታ ተጠቀም"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "የነበረውን ክፋይ ተጠቀም"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "ዲስኩን እንዳለ ደምስስ"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Windowsን አስወግድ "
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "የተለመደውን ዲስክ አከፋፈል"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr ""
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr ""
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr ""
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "የጥቅሎችን ምርጫ አስቀምጥ"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "የቀድሞው"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "ትከል"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "የደህንነት ተቆጣጣሪ"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr ""
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr ""
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "ስፓኒሽ"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-
-#: help.pm:681
-#, fuzzy, c-format
-msgid "with Wheel emulation"
-msgstr "አኃዞች (ከክፍተት ጋር)"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr ""
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr ""
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, fuzzy, c-format
-msgid "Expert"
-msgstr "የመሸፈኛ ዘዴ"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "የድምፅ ካርድ"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "የሰአት ክልል"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "የቲቪ ካርድ"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "የISDN ካርድ"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "ንድፋዊ እይታ"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "መረብ"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "ወኪሎች"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "የደህንነት ደረጃ"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "የእሳት ግድግዳ"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "አስጀማሪያ"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "አገልግሎት"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "የሚቀጥለው ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- የቀድሞው"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: install_any.pm:406
-#, fuzzy, c-format
-msgid "Do you have further supplementary media?"
-msgstr "ሌላ አለ?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, fuzzy, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr "ሌላ አለ?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "ሲዲ-ሮም"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (http)"
-msgstr "መረብ"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (ftp)"
-msgstr "መረብ"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr ""
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, fuzzy, c-format
-msgid "No device found"
-msgstr "ምንም ጽሑፍ አልተገኘም"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr ""
-
-#: install_any.pm:489
-#, fuzzy, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "እንደገና የሚሰራ ምንም የለም።"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr ""
-
-#: install_any.pm:558
-#, fuzzy, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-
-#: install_any.pm:738
-#, fuzzy, c-format
-msgid "Copying in progress"
-msgstr "የተሻሻለ ዊድጌት ፍጠር"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "%sን በማንበብ ላይ ስህተት ተፈጥሯል"
-
-#: install_any.pm:1559
-#, fuzzy, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "የሚከተሉት ጥቅሎች ሊወገዱ ነው"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, fuzzy, c-format
-msgid "Please choose a media"
-msgstr "እባክዎ ያለ ሰነድን ይምረጡ"
-
-#: install_any.pm:1698
-#, fuzzy, c-format
-msgid "Bad media %s"
-msgstr "ፋይል ተጭኗል %s"
-
-#: install_any.pm:1710
-#, fuzzy, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "ፋይሉ በፊትም ነበር። ልጠቀምበት?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr ""
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "የሲስተም ተከላ"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "የሲስተም ምርጫ"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "የነበሩትን ክፋዮች ተጠቀም"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr ""
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr ""
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr ""
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "መጠኖቹን ይምረጡ"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr ""
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr ""
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr ""
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr ""
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr ""
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr ""
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "የWindows ክፋይ መጠን በማስተካከል ላይ"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "የFATን መጠን መለወጥ አልተሳካም: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM)ን አስወግድ"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "fdiskን ተጠቀም"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "የመትከያ ቦታ ማግኘት አልቻልኩም"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "መከፋፈል አልተሳካም: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "መረቡን በማቀራረብ ላይ"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "መረቡን በማለያየት ላይ"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, fuzzy, c-format
-msgid "Duplicate mount point %s"
-msgstr "እያንዳንዱን የተመረጠውን አርዕስተ ጉዳይ አባዙ"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr ""
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "የጥቅል ቡድን ምርጫ"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "አጠቃላይ መጠን: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "ትክክል ያልሆነ ጥቅል"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "ዝርያ: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "መጠን: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "አስፈላጊነት: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "ይህን ጥቅል መምረጥ/አለመምረጥ አይችሉም"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "%s ባለመገኘቱ ምክንያት"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "%s አጥጋቢ ባለመሆኑ ምክንያት"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "%sን ለማስተዋወቅ በመሞከር ላይ"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "%sን ለማቆየት"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "የሚከተሉት ጥቅሎች ሊተከሉ ነው"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "የሚከተሉት ጥቅሎች ሊወገዱ ነው"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr ""
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "ይህንን ጥቅል መምረጥ አይችሉም። ቀደም ብሎ ተተክሏል።"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr ""
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: install_steps_gtk.pm:389
-#, fuzzy, c-format
-msgid "Load/Save selection"
-msgstr "የጥቅል ምርጫ"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "የጥቅል ምርጫ በማሻሻል ላይ"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "አነስተኛ ተከላ"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "ለመትከል የሚፈልጉትን ጥቅል ይምረጡ"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "በመትከል ላይ"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "በግምት"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "ያለ ዝርዝሮች"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr " ይቀራል"
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "እባክዎ ይጠብቁ፣ ተከላ በማዘጋጀት ላይ..."
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d ጥቅሎች"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "የ%s ጥቅል በመትከል ላይ"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "አትቀበል"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr ""
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "ለማንኛውም ቀጥል?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr ""
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "አልተስተካከለም"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr ""
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr ""
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr ""
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr ""
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "ትከል/አሳድግ"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr ""
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr ""
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "የ%s ሚስጢራዊ መገልበጫ ቁልፍ"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "እባክዎ የመጠቆሚያዎን አይነት ይምረጡ።"
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "የመጠቆሚያ ፖርት"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr ""
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "የቁልፎች ቅጂ"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "የቁልፉ 2 ቅጂ"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "የቁልፉ 3 ቅጂ"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr ""
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "IDEን በማስተካከል ላይ"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "ምንም ክፋይ አልተገኘም"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: install_steps_interactive.pm:266
-#, fuzzy, c-format
-msgid "Choose the mount points"
-msgstr "የመመልከቻውን ቀለም ይምረጡ"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-
-#: install_steps_interactive.pm:353
-#, fuzzy, c-format
-msgid "Choose the partitions you want to format"
-msgstr "እባክዎ ለማሳየት የሚፈልጉትን ተጠቃሽ-መረጃ ይምረጡ:"
-
-#: install_steps_interactive.pm:355
-#, fuzzy, c-format
-msgid "Check bad blocks?"
-msgstr "ተመልከት ይህንን"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr ""
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr ""
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr ""
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr ""
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "ጫን"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "አስቀምጥ"
-
-#: install_steps_interactive.pm:505
-#, fuzzy, c-format
-msgid "Bad file"
-msgstr "1 ፋይል"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "የተከላው አይነት"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "ሁሉንም"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" የተባለው ሲዲ-ሮም"
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "ተከላ በማዘጋጀት ላይ"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Post-install configuration"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr ""
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "ከአንጸባራቂ %s ጋር መገናኘት አልተቻለም"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "እንደገና መሞከር ይፈልጋል?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "የሰአት ክልሎት የትኛው ነው?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP ሰርቨር"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "ማጠቃለያ"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "ሲስተም"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "ሀርድዌር"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "በርቀት ያለ የCUPS ሰርቨር"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "ማተሚያ የለም"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "የISA ድምጽ ካርድ አለዎት?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "ንድፋዊ እይታ"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "መረብ እና ኢንተርኔት"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "ተስተካክሏል"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "ደህንነት"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "መስራት ጀምሯል"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "መስራት አቁሟል"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "ጀምር"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s %s ላይ ነው"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "አስጀማሪ በማዘጋጀት ላይ..."
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-
-#: install_steps_interactive.pm:1236
-#, fuzzy, c-format
-msgid "Do you want to use aboot?"
-msgstr "ስራ-እቅዱን መሠረዝ ይፈልጋሉ?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr ""
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr ""
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr ""
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "ፋይል ይምረጡ"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "ጨምር"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "ለውጥ"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "አስወግድ"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "መሰረታዊ"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "ጨርስ"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "አድርግ"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "የማይመች ምርጫ፣ እንደገና ይሞክሩ\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "ምርጫዎ? (የቀድሞ %s) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "ምርጫዎ? (0/1፣ የቀድሞ `%s') "
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "ቁልፍ `%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "እዚህ ቁልፍ ላይ መጫን ይፈልጋሉ?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "ምርጫዎ? (የቀድሞ `%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> ማሳሰቢያ፣ ስያሜ ተቀይሯል:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "እንደገና ውሰድ"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "ቼክኛ (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "ጀርመን"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "ድቮሬክ"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "ስፓኒሽ"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "ፊኒሽ"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "ፈረንሳይኛ"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "ኖርዌጂያን"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "ፖሊሽ"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "ራሽኛ"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "ስዊድንኛ"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "የUK መተየቢያ"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "የUS መተየቢያ"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "አልቤኒኛ"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "አርሜንኛ (አሮጌ)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "አርመናዊ (መተየቢያ መኪና)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "አርመናዊ (የድምጽ)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "ዐርቢኛ"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "አዘርባጃንኛ (ላቲንኛ)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "ቤልጂየምኛ"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "ቤንጋሊ (Inscript ዕቅድ)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "ቤንጋሊ (Probhat ዕቅድ)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "ቡልጋሪኛ (የድምጽ)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "ቡልጋሪኛ (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "ብራዚላዊ (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "ቦስኒያን"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "ቤላራሻኛ"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "ስዊዝ (የጀርመን ዕቅድ)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "ስዊዝ (የፈረንሳይ ዕቅድ)"
-
-#: keyboard.pm:204
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "ዐርቢኛ"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "ቼክኛ (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "ጀርመን (የሞቱ ቁልፎች የሉም)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "ዴቫናጋሪ"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "ዴኒሽ"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "ድቮሬክ (የአሜሪካ)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr ""
-
-#: keyboard.pm:215
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "ድቮሬክ (ስዊድንኛ)"
-
-#: keyboard.pm:217
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "ድቮሬክ (የአሜሪካ)"
-
-#: keyboard.pm:218
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "ድቮሬክ (ስዊድንኛ)"
-
-#: keyboard.pm:220
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "ድቮሬክ (ስዊድንኛ)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "ድቮሬክ (ስዊድንኛ)"
-
-#: keyboard.pm:222
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "ቦስኒያን"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "ኤስቶኒአን"
-
-#: keyboard.pm:227
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "ግሪክኛ"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "ጊዮርጊያን (\"ራሽኛ\" እቅድ)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "ጊዮርጊያን (\"ላቲንኛ\" እቅድ)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "ግሪክኛ"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "ግሪክኛ (ፖሊቶኒክ)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "ጉጃራቲ"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "ጉርሙክሂ"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "ክሮሽያዊ"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "ሀንጋሪኛ"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "አይሪሽ"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "እስራኤላዊ"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "እስራኤላዊ (Phonetic)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "ኢራኒያን"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "አይስላንድኛ"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "ጣሊያናዊ"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "ኢኑክቲቱት"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "ጃፓንኛ 106 ቁልፎች"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "ካናዳ"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "ኮሪያኛ መተየቢያ"
-
-#: keyboard.pm:254
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "ዐርቢኛ"
-
-#: keyboard.pm:255
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "ኦሪያ"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "ላቲን አሜሪካ"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "ሎቲን"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "ሊቱአኒያን AZERTY (አሮጌ)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "ሊቱአኒያን AZERTY (አዲስ)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr ""
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr ""
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "ላትቪያን"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "ማላያላም"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "ማከዶኒኛ"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "ምያንማር (ቡርመሰ)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "ሞንጎሊያን (ቄርሎሳዊ ጽሑፍ)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "ማልቴስ (የእንግሊዝ)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "ማልቴስ (የአሜሪካ)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "ደች"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "ኦሪያ"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "ፖሊሽ (qwerty ዕቅድ)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "ፖሊሽ (qwertz ዕቅድ)"
-
-#: keyboard.pm:277
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "ፖሊሽ"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "ፖርቱጋሊኛ"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "ካናዲያን (Quebec)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "ሮማኒያን (qwertz)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "ሮማኒያን (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "ራሽኛ (የድምጽ)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "ሳሚ (ኖርዌይኛ)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "ሳሚ (ስዊድንኛ/ፊኒሽ"
-
-#: keyboard.pm:289
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "ታይ መተየቢያ"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "ስሎቪኛ"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "ስሎቫኪያን (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "ስሎቫኪያን (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "ሰርቢያን (ቄርሎሳዊ ጽሑፍ)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "ስይሪያክ"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "ስይሪያክ (phonetic)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "ቴሉጉ"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "ታሚል (ISCII-ዕቅድ)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "ታሚል (መተየቢያ-ዕቅድ)"
-
-#: keyboard.pm:304
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "ታይ መተየቢያ"
-
-#: keyboard.pm:305
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "ታይ መተየቢያ"
-
-#: keyboard.pm:307
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "ታይ መተየቢያ"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "ታጂክ መተየቢያ"
-
-#: keyboard.pm:315
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "ጀርመን"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "ቱርክሽ (ባህላዊ \"F\" ሞዴል"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "ቱርክሽ (ዘመናዊ \"Q\" ሞዴል"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "ዩክረኒኛ"
-
-#: keyboard.pm:322
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "ኦሪያ"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "የአሜሪካ መተየቢያ (አለም አቀፍ)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "ኡዝቤክ (ቄርሎሳዊ ጽሑፍ)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr ""
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "ዩጎዝላቪያን (ላቲንኛ)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "የቀኝ Alt ቁልፉ"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "ሁለቱንም የShift ቁልፎች በአንድ ጊዜ"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Ctrl እና Shift ቁልፎችን በአንድ ጊዜ"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock ቁልፍ"
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Shift እና CapsLock ቁልፎችን በአንድ ጊዜ"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl እና Alt ቁልፎችን በአንድ ጊዜ"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt እና Shift ቁልፎችን በአንድ ጊዜ"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"መዘርዝር\" ቁልፍ"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "የግራ \"መስኮት\" ቁልፉ"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "የቀኝ \"መስኮት\" ቁልፉ"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "ሁለቱንም የControl ቁልፎች በአንድ ጊዜ"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "ሁለቱንም የAlt ቁልፎች በአንድ ጊዜ"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "የግራ Shift ቁልፉ"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "የቀኝ Shift ቁልፉ"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "የግራ Alt ቁልፍ"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "የግራ Control ቁልፍ"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "የቀኝ Control ቁልፍ"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "አንዶራ"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "የተባበሩት አረብ ኤምሬትስ"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "አፍጋኒስታን"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "አንቲጉዋ እና ባርቡዳ"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "አንጉኢላ"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "አልባኒያ"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "አርሜኒያ"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "ኔዘርላንድስ አንቲልስ"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "አንጐላ"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "አንታርክቲካ"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "አርጀንቲና"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "የአሜሪካ ሳሞአ"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "አሩባ"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "አዘርባጃን"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "ቦስኒያ እና ሄርዞጎቪኒያ"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "ባርቤዶስ"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "ባንግላዲሽ"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "ቡርኪና ፋሶ"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "ቡልጌሪያ"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "ባህሬን"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "ብሩንዲ"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "ቤኒን"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "ቤርሙዳ"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "ብሩኒ ዳሩሳላም"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "ቦሊቪያ"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "ባሃማስ"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "ቡህታን"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "የቦውቬት ደሴት"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "ቦትስዋና"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "ቤላሩስ"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "ቤሊዘ"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "ኮኮስ (ኬሊንግ) ደሴቶች"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "የኮንጐ ዲሞክራሲያዊ ሪፑብሊክ"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "የመካከለኛው አፍሪካ ሪፐብሊክ"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "የኮንጐ ዲሞክራሲያዊ ሪፑብሊክ"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "ኮት ዲቯር"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "ኩክ ደሴቶች"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "ቺሊ"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "ካሜሩን"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "ቻይና"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "ኮሎምቢያ"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "ሰርቢያ እና ሞንትኔግሮ"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "ኩባ"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "ኬፕ ቬርዴ"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "የገና ደሴቶች"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "ሳይፕረስ"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "ጂቡቲ"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "ዶሚኒካ"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "ዶሚኒክ ሪፑብሊክ"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "አልጄሪያ"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "ኢኳዶር"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "ግብጽ"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "ምዕራባዊ ሳህራ"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "ኤርትራ"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "ኢትዮጵያ"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "ፊጂ አይላንድ"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "ማርሻላዊ (የማርሻል አይላንድ)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "ሚክሮኔዢያ"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "ካይማን ደሴቶች"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "ጋቦን"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "እንግሊዝ"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "ግሬናዳ"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "ጆርጂያ"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "የፈረንሳይ ጉዊአና"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "ጋና"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "ጊብራልታር"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "ግሪንላንድ"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "ጋምቢያ"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "ጊኒ"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "ጉዋደሉፕ"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "ኢኳቶሪያል ጊኒ"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "ደቡብ ጆርጂያ እና የደቡብ ሳንድዊች ደሴቶች"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "ጉዋቲማላ"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "ጉዋም"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "ጊኒ-ቢሳዎ"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "ጉያና"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "ቻይንኛ (የሆንግ ኮንግ)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "የቱርኮችና የካኢኮስ ደሴቶች"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "ሆንዱራስ"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "ክሮኤሽያ"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "ሀይቲ*"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "ኢንዶኔዢያ"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "ህንድ"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "የብሪታኒያ ህንድ ውቂያኖስ ግዛት"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "ኢራቅ"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "ኢራን"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "አይስላንድ"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "ጃማይካ"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "ጆርዳን"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "ኬንያ"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "ኪርጂክስታን"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "ካምቦዲያ"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "ኪሪባቲ"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "ኮሞሮስ"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "ቅዱስ ኪትስ እና ኔቪስ"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "ኮሪያ (ሰሜን)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "ኮሪያ ሪፐብሊክ"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "ክዌት"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "ካይማን ደሴቶች"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "ካዛኪስታን"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "ላኦስ"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "ሊባኖስ"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "ሴንት ሉቺያ"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "ሊችተንስታይን"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "ሲሪላንካ"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "ላይቤሪያ"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "ሌሶቶ"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "ሊቱዌኒያ"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "ሉክሰምበርግ"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "ላትቪያ"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "ሊቢያ"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "ሞሮኮ"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "ሞናኮ"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "ሞልዶቫ"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "ማዳጋስካር"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "ማርሻል አይላንድ"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "ማከዶኒያ"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "ማሊ"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "ማያንማር"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "ሞንጎሊያ"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "የሰሜናዊ ማሪያና ደሴቶች"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "ማርቲኒክ"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "ሞሪቴኒያ"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "ሞንትሴራት"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "ማልታ"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "ማሩሸስ"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "ማልዲቭስ"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "ማላዊ"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "ሜክሲኮ"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "ማሌዢያ"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "ሞዛምቢክ"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "ናሚቢያ"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "ኒው ካሌዶኒያ"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "ኒጀር"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "ኖርፎልክ ደሴት"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "ናይጄሪያ"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "ኒካራጓ"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "ኔፓል"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "ናኡሩ"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "ኒኡይ"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "ኦማን"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "ፓናማ"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "ፔሩ"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "የፈረንሳይ ፖሊኔዢያ"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "ፓፑዋ ኒው ጊኒ"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "ፊሊፒንስ"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "ፓኪስታን"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "ቅዱስ ፒዬር እና ሚኩኤሎን"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "ፒትካኢርን"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "ፖርታ ሪኮ"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "ፓለስታይን"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "ፓራጓይ"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "ፓላው"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "ኳታር"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "ሪዩኒየን ደሴት"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "ሮሜኒያ"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "ሩዋንዳ"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "ሳውድአረቢያ"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "ሰሎሞን ደሴት"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "ሲሼልስ"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "ሱዳን"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "ሲንጋፖር"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "ሴንት ሄለና"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "ስሎቬኒያ"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "ስቫልባርድ እና ጃን ሜይን ደሴቶች"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "ሴራሊዮን"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "ሳን ማሪኖ"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "ሴኔጋል"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "ሱማሌ"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "ሱሪናም"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "ሳኦ ቶሜ እና ፕሪንሲፔ"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "ኤል ሳልቫዶር"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "ሲሪያ"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "ሱዋዚላንድ"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "የቱርኮችና የካኢኮስ ደሴቶች"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "ቻድ"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "የፈረንሳይ ደቡባዊ ግዛቶች"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "ቶጐ"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "ታጃኪስታን"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "ቶክላው"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "ምስራቅ ቲሞር"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "ቱርክሜኒስታን"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "ቱኒዚያ"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "ቶንጋ"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "ቱርክ"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "ትሪኒዳድ እና ቶባጎ"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "ቱቫሉ"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "ታንዛኒያ"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "ዩክሬን"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "ዩጋንዳ"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "የአሜሪካ ጥቃቅን ውጫዊ ደሴቶች"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "ኡራጓይ"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "ዩዝበኪስታን"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "ቫቲካን ከተማ"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "ቅዱስ ቪንሴንት እና ግሬናዲንስ"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "ቬንዙዌላ"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "የእንግሊዝ ድንግል ደሴቶች"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "የእንግሊዝ ድንግል ደሴቶች"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "ቬትናም"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "ቫኑአቱ"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "ዋሊስ እና ፉቱና ደሴቶች"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "የአሜሪካ ሳሞአ"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "የመን"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "ሜይኦቴ"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "ዛምቢያ"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "ዚምቧቤ"
-
-#: lang.pm:1073
-#, fuzzy, c-format
-msgid "You should install the following packages: %s"
-msgstr "ምርጫዎችን ማስቀመጥ አልተቻለም"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ""
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "ወደ %s እንኳን ደህና መጡ"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr ""
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "መለኪያዎች"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "ምንም"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "የአቃጅ ምርጫ"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
-
-#: modules/interactive.pm:63
-#, fuzzy, c-format
-msgid "Found %s interfaces"
-msgstr "አልተገኘም"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "ሌላ አልዎት?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "ማንኛውም %s እይታዎች አልዎት?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "የሃርድዌር መረጃ ይመልከቱ"
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr ""
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr ""
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr ""
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr ""
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr ""
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(%s አቅድ)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "የአቃጅ ምርጫዎች:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr ""
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "ራስ-ገዥ ሞካሪ"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "ምርጫዎችን ይግለጹ"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "ቍጥር"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d በነጠላ ሰረዝ የተለዩ ቁጥሮች"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d በነጠላ ሰረዝ የተለዩ ሐረጎች"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "በነጠላ ሰረዝ የተለዩ ቁጥሮች"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "በነጠላ ሰረዝ የተለዩ ሐረጎች"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - መጠቆሚያ"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "መደበኛ"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr ""
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr ""
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr ""
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "ራስ-ገዝ"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking መጠቆሚያ"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr ""
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr ""
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "የማይክሮሶፍት ቃኚ"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 ቁልፍ"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "አጠቃላይ ባለ 2 ቁልፍ መጠቆሚያ"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr ""
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr ""
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "አጠቃላይ ባለ 3 ቁልፍ መጠቆሚያ"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "የመጠቆሚያ ሲስተሞች"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "የLogitech CC ተከታታይ"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr ""
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "የMM ተከታታይ"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr ""
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr ""
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 ቁልፎች"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 ቁልፎች"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "አጠቃላይ"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr ""
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "የማይክሮሶፍት ቃኚ"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "ምንም"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "መጠቆሚያ የለም"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr ""
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "እባክዎ መጠቆሚያውን ይሞክሩ"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "መጠቆሚያውን ለማስጀመር፣"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "ተሽከርካሪውን ያንቀሳቅሱ!"
-
-#: network/adsl.pm:19
-#, fuzzy, c-format
-msgid "use PPPoE"
-msgstr "በጥቅም ላይ ያለ"
-
-#: network/adsl.pm:20
-#, fuzzy, c-format
-msgid "use PPTP"
-msgstr "በጥቅም ላይ ያለ"
-
-#: network/adsl.pm:21
-#, fuzzy, c-format
-msgid "use DHCP"
-msgstr "በጥቅም ላይ ያለ"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr ""
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - ተገኘቷል"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr ""
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr ""
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "ከኢንተርኔት ጋር አገናኝ"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, fuzzy, c-format
-msgid "ADSL connection type:"
-msgstr "ጥሩው የፋይል ዓይነት"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "የመረብ ሰርቨር"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "የዘርፍ ስም ሰርቨር"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "SSH ሰርቨር"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "የFTP ተጠሪ"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "የመልዕክት ተጠሪ"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr ""
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "የቴልኔት ሰርቨር"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "የCUPS ሰርቨር"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr ""
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr ""
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "ማንኛውም (የእሳት ግድግዳ የለም)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "ሌላ ወደቦች"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "ያልተዘረዘሩ - በእጅ ያስተካክሉ"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "አላውቅም"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "መመሪያ"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "የመመሪያ ምርጫ"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "ውስጣዊ ISDN ካርድ"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "በእጅ ምርጫ"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr ""
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "መካከለኛ አውሮፓውያን፣ Macintosh"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel speedtouch USB ሞዴም"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Sagem USB ሞዴም"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Bewan ሞዴም"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "ECI Hi-Focus ሞዴም"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr ""
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr ""
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr ""
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr ""
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr ""
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr ""
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr ""
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr ""
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr ""
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr ""
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, fuzzy, c-format
-msgid "Script-based"
-msgstr "የተመሠረተው፦"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, fuzzy, c-format
-msgid "Terminal-based"
-msgstr "የተመሠረተው፦"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "የመረብ እና ኢንተርኔት ምርጫ"
-
-#: network/netconnect.pm:300
-#, fuzzy, c-format
-msgid "(detected on port %s)"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#  -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, fuzzy, c-format
-msgid "(detected %s)"
-msgstr "አውቶማቲካሊ ተፈልጎ የተገኘ"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(ተገኝቷል)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "የቅርብ መረብ ግንኙነት"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "ሽቦ አልባ ግንኙነት"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "የADSL ግንኙነት"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "የኬብል ግንኙነት"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "የISDN ግንኙነት"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "የሞዴም ግንኙነት"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "ለማስተካከል የሚፈልጉትን ግንኙነት ይምረጡ"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "የግንኙነት ምርጫ"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "ካርድ IRQ"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "ካርድ mem (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "ካርድ IO"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "ካርድ IO_0"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "ካርድ IO_1"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "የራስዎ ስልክ ቁጥር"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "የአገልግሎት ሰጪው ስም (ለምሳሌ: provider.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "የአገልግሎት ሰጪው ስልክ ቁጥር"
-
-#: network/netconnect.pm:358
-#, fuzzy, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "የአገልግሎት ሰጪ ስልክ ቁጥር"
-
-#: network/netconnect.pm:359
-#, fuzzy, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "የአገልግሎት ሰጪ ስልክ ቁጥር"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, fuzzy, c-format
-msgid "Dialing mode"
-msgstr "የመሸፈኛ ዘዴ"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "የግንኙነት ፍጥነት"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr ""
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr ""
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "የመዝገብ ሚስጢራዊ ቃል"
-
-#: network/netconnect.pm:382
-#, fuzzy, c-format
-msgid "Cable: account options"
-msgstr "ባለሁለት አቅጣጫ ምርጫዎች"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "ለማስተካከል የመረብ እይታ ይምረጡ:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "የመረብ መሳሪያ"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "ውጫዊ የISDN ሞዴም"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, fuzzy, c-format
-msgid "Select a device!"
-msgstr "የመረብ ዕቃ"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "የISDN ምርጫ"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "ምን አይነት ካርድ ነው ያልዎት?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "ቀጥል"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "ይቁም"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "ከሚከተሉት የISDN ካርዶች ውስጥ የትኛው ነው የእርሶ?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr ""
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr ""
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr ""
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "አገልግሎት ሰጪ:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-
-#: network/netconnect.pm:573
-#, fuzzy, c-format
-msgid "Select the modem to configure:"
-msgstr "ለማስተካከል ሞዴም ይምረጡ:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "አግልግሎት ሰጪዎን ይምረጡ"
-
-#: network/netconnect.pm:682
-#, fuzzy, c-format
-msgid "Dialup: account options"
-msgstr "ባለሁለት አቅጣጫ ምርጫዎች"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "የግንኙነት ስም"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "የስልክ ቁጥር"
-
-#: network/netconnect.pm:687
-#, fuzzy, c-format
-msgid "Login ID"
-msgstr "መለያ አስገባ"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr ""
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "IP መለኪያዎች"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP አድራሻ"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Subnet mask"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr ""
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "የዶሜን ስም"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr ""
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr ""
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Gateway"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "የGateway IP አድራሻ"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "የADSL ምርጫ"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "እባክዎ የADSL አገልግሎት ሰጪዎን ይምረጡ"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "ፍሎፒ ተጠቀም"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "የWindows ክፋዬን ተጠቀም"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "በኋላ ይደረግ"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr ""
-
-#: network/netconnect.pm:870
-#, fuzzy, c-format
-msgid "Firmware copy succeeded"
-msgstr "መቅጃውን ክፈት"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr ""
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr ""
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr ""
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, fuzzy, c-format
-msgid "Could not install the %s package!"
-msgstr "ምርጫዎችን ማስቀመጥ አልተቻለም"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr ""
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr ""
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr ""
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Name=መረብ"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "ቍጥር አሰጣጡን እንደገና በ...ላይ ጀምር፦"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, fuzzy, c-format
-msgid "Metric"
-msgstr "ሜክሲኮ"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr ""
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr ""
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr ""
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr ""
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr ""
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s አስቀድሞ ጥቅም ላይ ነው\n"
-
-#: network/netconnect.pm:1167
-#, fuzzy, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "የነሲብ URLን አታስችል"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, fuzzy, c-format
-msgid "Install a new driver"
-msgstr "ሲስተም ትከል"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr ""
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, fuzzy, c-format
-msgid "Operating Mode"
-msgstr "የመሸፈኛ ዘዴ"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Ad-hoc"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "ገዢ"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "ደጋሚ"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "ሁለተኛ"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "ራስ-ገዝ"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "የመረብ ስም (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "የመረብ መለያ"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr ""
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr ""
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, fuzzy, c-format
-msgid "Bitrate (in b/s)"
-msgstr "በጥቅም ላይ ያለ"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr ""
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, fuzzy, c-format
-msgid "Host name (optional)"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "የእንግዳ ተቀባይ ስም"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "DNS ሰርቨር 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "DNS ሰርቨር 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "DNS ሰርቨር 3"
-
-#: network/netconnect.pm:1373
-#, fuzzy, c-format
-msgid "Search domain"
-msgstr "የObjectDirectory ዶሜን"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (ለምሳሌ: %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "የGateway መሳሪያ"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr ""
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr ""
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "የኢንተርኔት ግንኙነት"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr ""
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "ምርጫውን መሞከር ይፈልጋሉ?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr ""
-
-#: network/netconnect.pm:1478
-#, fuzzy, c-format
-msgid "Automatically at boot"
-msgstr "ቍጥር አሰጣጡን እንደገና በ...ላይ ጀምር፦"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, fuzzy, c-format
-msgid "How do you want to dial this connection?"
-msgstr "ምርጫውን መሞከር ይፈልጋሉ?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr ""
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "የመረብ ምርጫ"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr ""
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "ግንኙነትዎን በመሞከር ላይ..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "ሲስተሙ አሁን ከኢንተርኔት ጋር ተገናኝቷል።"
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "ለድህንነት ሲባል፣ ግንኙነቱ አሁን ይቋረጣል።"
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "የወኪሎች ምርጫ"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "የHTTP ወኪል"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "የFTP ወኪል"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "ወኪል http://... መሆን አለበት"
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL በ'ftp:' ወይም በ'http:' መጀመር አለበት"
-
-#: network/shorewall.pm:25
-#, fuzzy, c-format
-msgid "Firewalling configuration detected!"
-msgstr "ተስተካክሎ የተቀመጠውን ባዕድ መነሻ ጥቀስ"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "ፍሎፒ ያስገቡ"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr ""
-
-#: partition_table.pm:397
-#, fuzzy, c-format
-msgid "mount failed: "
-msgstr "%s አልተገኘም"
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr ""
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-
-#: partition_table.pm:611
-#, fuzzy, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "ከ &pot ሰነድ አሻሽል"
-
-#: partition_table.pm:613
-#, fuzzy, c-format
-msgid "Bad backup file"
-msgstr "ጥሩው የፋይል ዓይነት"
-
-#: partition_table.pm:633
-#, fuzzy, c-format
-msgid "Error writing to file %s"
-msgstr "ስህተት፦ የታቀደው ፋይል '%s'ን መክፈት አልተቻለም\n"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr ""
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "አስፈላጊ"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "በጣም ጥሩ"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "ጥሩ"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "ምናልባት"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "የቅርብ ጊዜ ፋይሎች"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(በ %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(በዚህ ማሽን ላይ)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr ""
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "በCUPS ሰርቨር \"%s\" ላይ"
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr "(ቀዳሚ)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr ""
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr ""
-
-#: printer/data.pm:152
-#, fuzzy, c-format
-msgid "Remote CUPS"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "ያልታወቀ ሞዴል"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "የቅርብ ማተሚያ"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "የሩቅ ማተሚያ"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr ""
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr ""
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr ""
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr ""
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr ""
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr ""
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "የተጠቆመ ሀሳብ"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "ያልታወቀ ሞዴል"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, fuzzy, c-format
-msgid "Configured on this machine"
-msgstr "መረጃ በዚህ መጠቀሚያ ፕሮግራም ላይ"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, fuzzy, c-format
-msgid " on parallel port #%s"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr "፣ USB ማተሚያ #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr "፣ የUSB ማተሚያ"
-
-#: printer/main.pm:369
-#, fuzzy, c-format
-msgid ", HP printer on a parallel port"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: printer/main.pm:371
-#, fuzzy, c-format
-msgid ", HP printer on USB"
-msgstr "፣ የUSB ማተሚያ"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:375
-#, fuzzy, c-format
-msgid ", HP printer"
-msgstr "፣ የUSB ማተሚያ"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ""
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ""
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr "፣ ወደ %s በማተም ላይ"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr "፣ የ%s ትዕዛዝን በመጠቀም"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, fuzzy, c-format
-msgid "USB printer #%s"
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/main.pm:433
-#, fuzzy, c-format
-msgid "USB printer"
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/main.pm:437
-#, fuzzy, c-format
-msgid "HP printer on a parallel port"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: printer/main.pm:439
-#, fuzzy, c-format
-msgid "HP printer on USB"
-msgstr "ማተሚያ አልተገኘም!"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:443
-#, fuzzy, c-format
-msgid "HP printer"
-msgstr "ማተሚያ"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr ""
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr ""
-
-#: printer/main.pm:462
-#, fuzzy, c-format
-msgid "Prints into %s"
-msgstr "አሁን ያለውን ፋይል ያትማል"
-
-#: printer/main.pm:465
-#, fuzzy, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: printer/main.pm:478
-#, fuzzy, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/main.pm:481
-#, fuzzy, c-format
-msgid "Uses command %s"
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/main.pm:483
-#, fuzzy, c-format
-msgid "URI: %s"
-msgstr "URI፦"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "Name=መረብ"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "የተጠቃሚው እይታ"
-
-#: printer/main.pm:1185
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "መረብ"
-
-#: printer/main.pm:1187
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "እንግዳ ተቀባይ፦"
-
-#: printer/main.pm:1216
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "&ፖርት፦"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:67
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "የማተሚያውን ማስተካከያ በሚጭንበት ጊዜ ስህተት ተፈጥሯል"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr ""
-
-#: printer/printerdrake.pm:84
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(ስለ ቃላት አጻጻፍ አስተያየት የለም)"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr ""
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr ""
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr ""
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, fuzzy, c-format
-msgid "On"
-msgstr "ኦማን"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "አጥፋ"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr ""
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-
-#: printer/printerdrake.pm:173
-#, fuzzy, c-format
-msgid "Add host/network"
-msgstr "የቀይ ባርኔታ መረብ"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr ""
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr ""
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "ተጠሪ ጨምር"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "የተመረጠውን ተጠሪ ይጠቀም"
-
-#: printer/printerdrake.pm:373
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "የተመረጠውን ተጠሪ ይጠቀም"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-
-#: printer/printerdrake.pm:422
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "ከፍተኛ የጠፉ ቃላት ቁጥር"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "ፖርት"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr ""
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr ""
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr ""
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, fuzzy, c-format
-msgid "Reading printer data..."
-msgstr "GHex (%s)፦ ዳታ ፈልግ"
-
-#: printer/printerdrake.pm:587
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "የCUPS ተጠሪ"
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, fuzzy, c-format
-msgid "Select Printer Connection"
-msgstr "የማተሚያውን ሞዴል ምረጡ"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr ""
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:680
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "የሲስተም ሜኑ አሳይ (_S)"
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr ""
-
-#: printer/printerdrake.pm:699
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "ያልታወቀ መስመር መስቆሚያ"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr ""
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr ""
-
-#: printer/printerdrake.pm:833
-#, fuzzy, c-format
-msgid "Found printer on %s..."
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr "አብራ"
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "የማተሚያውን ሞዴል ምረጡ"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr ""
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: printer/printerdrake.pm:875
-#, fuzzy, c-format
-msgid "Configuring printer on %s..."
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "አዲስ ማተሚያ ጨምር"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr ""
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "የ%s ጥቅሎችን መትከል አልተቻለም!"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr ""
-
-#: printer/printerdrake.pm:1245
-#, fuzzy, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1252
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "አውቶማቲካሊ ተፈልጎ የተገኘ"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr ""
-
-#: printer/printerdrake.pm:1263
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1347
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "ማተሚያ አልተገኘም!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "የቅርብ ማተሚያዎች"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "የተገኙት ማተሚያዎች"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr ""
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "በማቋረጥ ላይ"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr ""
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: printer/printerdrake.pm:1477
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: printer/printerdrake.pm:1478
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "አዲስ የማተሚያ ስም"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "መረጃ"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "<b>ሞዴል</b>፦ %s<br>"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Name=መረብ"
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, fuzzy, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr ""
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-
-#: printer/printerdrake.pm:1659
-#, fuzzy, c-format
-msgid "SMB server host"
-msgstr "የተመረጠው ተጠሪ ይታረም"
-
-#: printer/printerdrake.pm:1660
-#, fuzzy, c-format
-msgid "SMB server IP"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "የጋራ ስም"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "የስራ ቡድን"
-
-#: printer/printerdrake.pm:1666
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "አውቶማቲካሊ ተፈልጎ የተገኘ"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "የደህንነት ማስጠንቀቂያ!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: printer/printerdrake.pm:1779
-#, fuzzy, c-format
-msgid "NetWare Printer Options"
-msgstr "ባለሁለት አቅጣጫ ምርጫዎች"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "የማተሚያ ሰርቨር"
-
-#: printer/printerdrake.pm:1782
-#, fuzzy, c-format
-msgid "Print Queue Name"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, fuzzy, c-format
-msgid ", host \"%s\", port %s"
-msgstr "የእንግዳ ተቀባይ ስም"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, fuzzy, c-format
-msgid "Host \"%s\", port %s"
-msgstr "የእንግዳ ተቀባይ ስም"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr ""
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr ""
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr ""
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, fuzzy, c-format
-msgid "Printer Device URI"
-msgstr "ያልተደገፈ ጽሁፉ/uri፦ "
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2147
-#, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "ማዘዣው አልተገኘም፦ "
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "ትእዛዝ መስጫ"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, fuzzy, c-format
-msgid "HPLIP"
-msgstr "PL_IP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr ""
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, fuzzy, c-format
-msgid "Installing %s package..."
-msgstr "ጥቅሎችን በመትከል ላይ..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:2277
-#, fuzzy, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "%sን የት መትከል ይፈልጋሉ?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr ""
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr ""
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2509
-#, fuzzy, c-format
-msgid "Configuring device..."
-msgstr "አገልግሎቶችን ሰይም"
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "የትርጉም-ማስታወሻ መረጃ-ባንክን አመንጭ።"
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "የማተሚያ ስም፦"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "መግለጫ"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "ቦታ"
-
-#: printer/printerdrake.pm:2810
-#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "የትርጉም-ማስታወሻ መረጃ-ባንክን አመንጭ።"
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "ማተሚያው ሞዴል"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "ይህ ትክክል ነው?"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "የማተሚያውን ሞዴል ምረጡ"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3020
-#, fuzzy, c-format
-msgid "Install PPD file from"
-msgstr "ከ &pot ሰነድ አሻሽል"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, fuzzy, c-format
-msgid "Floppy Disk"
-msgstr "Name=መረጃ መያዣ"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, fuzzy, c-format
-msgid "Other place"
-msgstr "ሌላ ምርጫዎች"
-
-#: printer/printerdrake.pm:3039
-#, fuzzy, c-format
-msgid "Select PPD file"
-msgstr "ጥሩው የፋይል ዓይነት"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr ""
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr ""
-
-#: printer/printerdrake.pm:3060
-#, fuzzy, c-format
-msgid "Installing PPD file..."
-msgstr "ጥሩው የፋይል ዓይነት"
-
-#: printer/printerdrake.pm:3178
-#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "ተስተካክሎ የተቀመጠውን ባዕድ መነሻ ጥቀስ"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "ተስተካክሎ የተቀመጠውን ባዕድ መነሻ ጥቀስ"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-
-#: printer/printerdrake.pm:3245
-#, fuzzy, c-format
-msgid "Lexmark X125 configuration"
-msgstr "ተስተካክሎ የተቀመጠውን ባዕድ መነሻ ጥቀስ"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3268
-#, fuzzy, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "የድምጽ ማስተካከያ"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3295
-#, fuzzy, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: printer/printerdrake.pm:3589
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "የተመረጠውን የማተሚያ ይዞታዎች አስተካክል"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3600
-#, fuzzy, c-format
-msgid "Option %s must be a number!"
-msgstr "(%f በሰነድ-ስም ይተካል፤ %l በመስመር ቁጥር)"
-
-#: printer/printerdrake.pm:3604
-#, fuzzy, c-format
-msgid "Option %s out of range!"
-msgstr "/ተመልከት/ከርቀት እይታ"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: printer/printerdrake.pm:3672
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "የገጾች ብዛት"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: printer/printerdrake.pm:3677
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "(ስለ ቃላት አጻጻፍ አስተያየት የለም)"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "አትም"
-
-#: printer/printerdrake.pm:3703
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "እንደ ድረ ገጽ"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr ""
-
-#: printer/printerdrake.pm:3711
-#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "እንደ ድረ ገጽ"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr ""
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, fuzzy, c-format
-msgid "Printing test page(s)..."
-msgstr "የገጽ አቀማመጡን ለማተም ሰይም"
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr ""
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr ""
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3892
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/printerdrake.pm:3897
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/printerdrake.pm:3903
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "የአሁኑ ዝርዝር መለያ"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, fuzzy, c-format
-msgid " - Print head alignment\n"
-msgstr "የአግድም ኩልኩል፦"
-
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "የቀለም ምርጫ"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "የማተሚያውን ማስተካከያ በሚጭንበት ጊዜ ስህተት ተፈጥሯል"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: printer/printerdrake.pm:4043
-#, fuzzy, c-format
-msgid "Do not transfer printers"
-msgstr "ዶሴዎቹ የሉም"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "ይተላለፍ"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "አዲስ የማተሚያ ስም"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: printer/printerdrake.pm:4101
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "GHex (%s)፦ ዳታ ፈልግ"
-
-#: printer/printerdrake.pm:4111
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Name=መረብ"
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "መልዕክቶችን አሁን አምጣ"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr ""
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr ""
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: printer/printerdrake.pm:4206
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "የሲስተም ሜኑ አሳይ (_S)"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "ከፍ ያለ"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr ""
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: printer/printerdrake.pm:4300
-#, fuzzy, c-format
-msgid "Checking installed software..."
-msgstr "ስለ የ&GNU ነጻ ሶፍትዌር"
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr ""
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr ""
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr ""
-
-#: printer/printerdrake.pm:4438
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr ""
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, fuzzy, c-format
-msgid "Local CUPS printing system"
-msgstr "የሕትመቱን ምርጫዎች ለውጥ"
-
-#: printer/printerdrake.pm:4526
-#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "የማተሚያውን ሞዴል ምረጡ"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr ""
-
-#: printer/printerdrake.pm:4576
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "የባሕር-መዝገብ እሴት '%s' ወደ '%s' እንደገና መሰየም አልተቻለም።"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr ""
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr ""
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: printer/printerdrake.pm:4831
-#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: printer/printerdrake.pm:4843
-#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "የሕትመቱን ምርጫዎች ለውጥ"
-
-#: printer/printerdrake.pm:4852
-#, fuzzy, c-format
-msgid "Normal Mode"
-msgstr "የመሸፈኛ ዘዴ"
-
-#: printer/printerdrake.pm:4853
-#, fuzzy, c-format
-msgid "Expert Mode"
-msgstr "የመሸፈኛ ዘዴ"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "የአታሚ ምርጫዎች"
-
-#: printer/printerdrake.pm:5158
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "የማተሚያውን ማስተካከያ በሚጭንበት ጊዜ ስህተት ተፈጥሯል"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: printer/printerdrake.pm:5165
-#, fuzzy, c-format
-msgid "This printer is disabled"
-msgstr "ይህ ክፋይ መጠነ ተስተካካይ አይደለም"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "ይደረግ!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "ጥሩው የፋይል ዓይነት"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr ""
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, fuzzy, c-format
-msgid "Printer manufacturer, model"
-msgstr "የማተሚያውን ሞዴል ምረጡ"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr ""
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, fuzzy, c-format
-msgid "Enable Printer"
-msgstr "ስለተጠሪ መረጃ"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, fuzzy, c-format
-msgid "Disable Printer"
-msgstr "ስለተጠሪ መረጃ"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "አቢወርድ፦ የህትመት ቅድመ ዕይታ"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr ""
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/printerdrake.pm:5241
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: printer/printerdrake.pm:5272
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: printer/printerdrake.pm:5277
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: printer/printerdrake.pm:5314
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ከቱልባሩ ላይ ይህንን ቁልፍ ማውጣት ይፈልጋሉ?"
-
-#: printer/printerdrake.pm:5318
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "የማተሚያው ትዕዛዝ፦ "
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "ቀዳሚ ማተሚያ"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr ""
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr ""
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr ""
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr ""
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr ""
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr ""
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr ""
-
-#: security/help.pm:17
-#, fuzzy, c-format
-msgid "Allow/Forbid autologin."
-msgstr "የተለመደውን ቱልባሮች ፍቀድ"
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr ""
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr ""
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr ""
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-
-#: security/help.pm:80 standalone/draksec:213
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "የደህንነት ደረጃ፦"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr ""
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr ""
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr ""
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr ""
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr ""
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-
-#: security/help.pm:108
-#, fuzzy, c-format
-msgid "Set the root umask."
-msgstr "የገጽ &ቅንጅት"
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr ""
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr ""
-
-#: security/help.pm:138
-#, fuzzy, c-format
-msgid "Set the user umask."
-msgstr "የአቢወርድ ቋንቋ፦"
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr ""
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr ""
-
-#: security/l10n.pm:13
-#, fuzzy, c-format
-msgid "Accept icmp echo"
-msgstr "አስተያየት የተሰጠበትን ለውጥ ተቀበል"
-
-#: security/l10n.pm:15
-#, fuzzy, c-format
-msgid "/etc/issue* exist"
-msgstr "%s ሰነድ የለም"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr ""
-
-#: security/l10n.pm:18
-#, fuzzy, c-format
-msgid "Direct root login"
-msgstr "የሚፈነጠቅ መመልከቻ ሲጀምር _አሳይ"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, fuzzy, c-format
-msgid "Allow X Window connections"
-msgstr "ይህንን መስኮት አተልቀው"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr ""
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr ""
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr ""
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr ""
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr ""
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr ""
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr ""
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr ""
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr ""
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr ""
-
-#: security/l10n.pm:35
-#, fuzzy, c-format
-msgid "Daily security check"
-msgstr "ተመልከት ይህንን"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr ""
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr ""
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-
-#: security/l10n.pm:39
-#, fuzzy, c-format
-msgid "Password history length"
-msgstr "የታሪክ መስኮት ክፈት"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr ""
-
-#: security/l10n.pm:41
-#, fuzzy, c-format
-msgid "Root umask"
-msgstr "የRoot የሚስጢር ቃል ፦"
-
-#: security/l10n.pm:42
-#, fuzzy, c-format
-msgid "Shell history size"
-msgstr "አውቶማቲክ የአምድ መጠን"
-
-#: security/l10n.pm:43
-#, fuzzy, c-format
-msgid "Shell timeout"
-msgstr "የሼል ውጤት"
-
-#: security/l10n.pm:44
-#, fuzzy, c-format
-msgid "User umask"
-msgstr "የተጠቃሚ ስም"
-
-#: security/l10n.pm:45
-#, fuzzy, c-format
-msgid "Check open ports"
-msgstr "ስለ &Open Source"
-
-#: security/l10n.pm:46
-#, fuzzy, c-format
-msgid "Check for unsecured accounts"
-msgstr "ሰነዱን ከተሳሳተ የቃላት አጻጻፍ አጣሩ"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr ""
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr ""
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr ""
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr ""
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr ""
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr ""
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr ""
-
-#: security/l10n.pm:54
-#, fuzzy, c-format
-msgid "Report unowned files"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr ""
-
-#: security/l10n.pm:56
-#, fuzzy, c-format
-msgid "Run chkrootkit checks"
-msgstr "በተርሚናሉ ውስጥ &አስኪድ"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr ""
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr ""
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr ""
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr ""
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr ""
-
-#: security/level.pm:10
-#, fuzzy, c-format
-msgid "Welcome To Crackers"
-msgstr "እንደገና የሚሰራ ምንም የለም።"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr ""
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "ከፍ ያለ"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr ""
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr ""
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-
-#: security/level.pm:55
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "ባለሁለት አቅጣጫ ምርጫዎች"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr ""
-
-#: security/level.pm:60
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "የደህንነት ደረጃ፦"
-
-#: security/level.pm:62
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "ለህብሩ የglyph  ቅርጽ አወጣት ተጠቀም"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr ""
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr ""
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr ""
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "በማተም ላይ"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "ኢንተርኔት"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "ሰነድ መጋራት"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr ""
-
-#: services.pm:146
-#, fuzzy, c-format
-msgid "Database Server"
-msgstr "ስለተጠሪ መረጃ"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "በሥራ ላይ"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr ""
-
-#: services.pm:213
-#, fuzzy, c-format
-msgid "Services and daemons"
-msgstr "የገጽ አናት እና የገጽ ግርጌ"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "መረጃ"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "በተጠየቀ ጊዜ ጀምር"
-
-#: services.pm:227
-#, fuzzy, c-format
-msgid "On boot"
-msgstr "የተመሠረተው፦"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "ጀምር"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "አቁም"
-
-#: share/advertising/01.pl:13
-#, fuzzy, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "ትርጉሙ &ጅምር ነው"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "ወደ <b>Mandriva Linux</b>! እንኳን ደህና መጡ"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-
-#: share/advertising/02.pl:13
-#, fuzzy, c-format
-msgid "<b>Open Source</b>"
-msgstr "ማስታወሻ"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr ""
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-
-#: share/advertising/03.pl:13
-#, fuzzy, c-format
-msgid "<b>The GPL</b>"
-msgstr "ማስታወሻ"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr ""
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr ""
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>የMandriva Linux ባለሞያ</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr ""
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr ""
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, fuzzy, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "Name=ኬዲኢ 1"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, fuzzy, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>የእድገት አካባቢዎች</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr ""
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, fuzzy, c-format
-msgid "<b>Kontact</b>"
-msgstr "ማስታወሻ"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>ኢንተርኔትን ያካሉ</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr ""
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, fuzzy, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "ፋይሎችን በFTP ያዛውሩ"
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr ""
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr ""
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr ""
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr ""
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>የእድገት አካባቢዎች</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Editors</b>"
-msgstr "መሣሪያዎች ለሶፍትዌር መሻሻል"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-
-#: share/advertising/21.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Languages</b>"
-msgstr "መሣሪያዎች ለሶፍትዌር መሻሻል"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr ""
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr ""
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr ""
-
-#: share/advertising/21.pl:23
-#, fuzzy, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "ማስታወሻ"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr ""
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, fuzzy, c-format
-msgid "\t* And many more."
-msgstr "እና ብዙ ተጨማሪዎች ..."
-
-#: share/advertising/22.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Tools</b>"
-msgstr "መሣሪያዎች ለሶፍትዌር መሻሻል"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr ""
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr ""
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, fuzzy, c-format
-msgid "<b>Servers</b>"
-msgstr "ማስታወሻ"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr ""
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "አንቀጹን መሀል ኩልኩል አድርግ"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, fuzzy, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "Name=ኬዲኢ 1"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, fuzzy, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr ""
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>የMandriva Linux ክለብ</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr ""
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>የMandriva Linux ባለሞያ</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr ""
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr ""
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr ""
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr ""
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr ""
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "ስየማ"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr ""
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr ""
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr ""
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "ማስረጃ"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr ""
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr ""
-
-#: share/compssUsers.pl:85
-#, fuzzy, c-format
-msgid "Apache"
-msgstr "መተላለፊያ"
-
-#: share/compssUsers.pl:88
-#, fuzzy, c-format
-msgid "Groupware"
-msgstr "የውይይት መድረክ"
-
-#: share/compssUsers.pl:89
-#, fuzzy, c-format
-msgid "Kolab Server"
-msgstr "የሳምባ ተጠሪ"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr ""
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr ""
-
-#: share/compssUsers.pl:96
-#, fuzzy, c-format
-msgid "Mail/News"
-msgstr "አዲስ ፋይል።"
-
-#: share/compssUsers.pl:97
-#, fuzzy, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "የመልዕክት ተጠሪ ሚስጢራዊ ቃል ያስፈልጋል"
-
-#: share/compssUsers.pl:100
-#, fuzzy, c-format
-msgid "Directory Server"
-msgstr "በዝርዝር ውስጥ ዶሴ ጨምር"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "የFTP ተጠሪ"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr ""
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, fuzzy, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "የዘርፍ ስም ሰርቨር"
-
-#: share/compssUsers.pl:112
-#, fuzzy, c-format
-msgid "File and Printer Sharing Server"
-msgstr "የማተሚያ ሰርቨር"
-
-#: share/compssUsers.pl:113
-#, fuzzy, c-format
-msgid "NFS Server, Samba server"
-msgstr "የሳምባ ሰርቨር"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "ዳታቤዝ"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr ""
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr ""
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "ፖስታ"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr ""
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr ""
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr ""
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr ""
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: share/compssUsers.pl:179
-#, fuzzy, c-format
-msgid "Utilities"
-msgstr "ፊሊፒንስ"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "ስለተጠሪ መረጃ"
-
-#: share/compssUsers.pl:186
-#, fuzzy, c-format
-msgid "Webmin"
-msgstr "ዌብ-ካም"
-
-#: share/compssUsers.pl:187
-#, fuzzy, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Name=መረብ"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, fuzzy, c-format
-msgid "Mandriva Wizards"
-msgstr "<b>የMandriva Linux ባለሞያ</b>"
-
-#: share/compssUsers.pl:197
-#, fuzzy, c-format
-msgid "Wizards to configure server"
-msgstr "የባሕር-መዝገብ እሴት '%s' ወደ '%s' እንደገና መሰየም አልተቻለም።"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[መተየቢያ]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr ""
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr ""
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s የተጠቃሚ ስም ይፈልጋል...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr ""
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, fuzzy, c-format
-msgid "Terminal Server Configuration"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: standalone/drakTermServ:221
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "ስለተጠሪ መረጃ"
-
-#: standalone/drakTermServ:227
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "ስለተጠሪ መረጃ"
-
-#: standalone/drakTermServ:233
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "ስለተጠሪ መረጃ"
-
-#: standalone/drakTermServ:239
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "ስለተጠሪ መረጃ"
-
-#: standalone/drakTermServ:248
-#, fuzzy, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "ዐርቢኛ፣ ISO-8859-6"
-
-#: standalone/drakTermServ:252
-#, fuzzy, c-format
-msgid "Net Boot Images"
-msgstr "ምስሎችን አስስ"
-
-#: standalone/drakTermServ:259
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "አምድ በኋላ ጨምር"
-
-#: standalone/drakTermServ:263
-#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "አምድ በኋላ ጨምር"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "ምስሎች"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "ቀን እና ሰዓት"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, fuzzy, c-format
-msgid "Cancel Wizard"
-msgstr "የመዝገብ አገልጋይ"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, fuzzy, c-format
-msgid "Use thin clients."
-msgstr "ከቀኝ ወደ ግራ ተራ ተጠቀም"
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr ""
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr ""
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, fuzzy, c-format
-msgid "Done!"
-msgstr "አልቋል"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, fuzzy, c-format
-msgid "Terminal Server Overview"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, fuzzy, c-format
-msgid "Boot Floppy"
-msgstr "ፍሎፒ ላይ"
-
-#: standalone/drakTermServ:668
-#, fuzzy, c-format
-msgid "Boot ISO"
-msgstr "ISO A4"
-
-#: standalone/drakTermServ:670
-#, fuzzy, c-format
-msgid "PXE Image"
-msgstr "ምስል አስገባ"
-
-#: standalone/drakTermServ:731
-#, fuzzy, c-format
-msgid "Default kernel version"
-msgstr "የነበረው ቀን (ያለ ሰዓት)"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, fuzzy, c-format
-msgid "Build Whole Kernel -->"
-msgstr "ሙሉ ቃላት ብቻ"
-
-#: standalone/drakTermServ:771
-#, fuzzy, c-format
-msgid "No kernel selected!"
-msgstr "ምንም ተጨማሪ ፕሮግራም አልተመረጠም"
-
-#: standalone/drakTermServ:774
-#, fuzzy, c-format
-msgid "Build Single NIC -->"
-msgstr "የአንድ ደራሲ መግቢያ"
-
-#: standalone/drakTermServ:778
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "ምንም ተጨማሪ ፕሮግራም አልተመረጠም"
-
-#: standalone/drakTermServ:781
-#, fuzzy, c-format
-msgid "Build All Kernels -->"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakTermServ:796
-#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "&አጥፉ"
-
-#: standalone/drakTermServ:801
-#, fuzzy, c-format
-msgid "No image selected!"
-msgstr "ምንም ተጨማሪ ፕሮግራም አልተመረጠም"
-
-#: standalone/drakTermServ:804
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "የተመረጡትን ሁሉንም አርዕስተ ጉዳዮች እስከመጨረሻው አጥፋቸው"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-
-#: standalone/drakTermServ:938
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "ተጠቃሚን ጨምር"
-
-#: standalone/drakTermServ:944
-#, fuzzy, c-format
-msgid "<-- Del User"
-msgstr "የተጠቃሚ ስም"
-
-#: standalone/drakTermServ:980
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "ዓይነት፦"
-
-#: standalone/drakTermServ:984
-#, fuzzy, c-format
-msgid "local config: %s"
-msgstr "&ለውጡ"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr ""
-
-#: standalone/drakTermServ:1046
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "የተለመደውን ቱልባሮች ፍቀድ"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, fuzzy, c-format
-msgid "Add Client -->"
-msgstr "ሰነዶችን ጨምር"
-
-#: standalone/drakTermServ:1062
-#, fuzzy, c-format
-msgid "type: fat"
-msgstr "DOS (fat)"
-
-#: standalone/drakTermServ:1063
-#, fuzzy, c-format
-msgid "type: thin"
-msgstr "የፋይሉ ዓይነት"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr ""
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr ""
-
-#: standalone/drakTermServ:1079
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "የገጽ ግርጌውን ያስተካክሉ"
-
-#: standalone/drakTermServ:1105
-#, fuzzy, c-format
-msgid "Disable Local Config"
-msgstr "የነሲብ URLን አታስችል"
-
-#: standalone/drakTermServ:1112
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "ማያያዣ ቁልፎች &አጥፉ"
-
-#: standalone/drakTermServ:1121
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "&ለውጡ"
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, fuzzy, c-format
-msgid "All clients will use %s"
-msgstr "ከቀኝ ወደ ግራ ተራ ተጠቀም"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr ""
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr ""
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: standalone/drakTermServ:1252
-#, fuzzy, c-format
-msgid "Subnet Mask:"
-msgstr "/ደረጃ/Mask/Add Layer Mask..."
-
-#: standalone/drakTermServ:1259
-#, fuzzy, c-format
-msgid "Broadcast Address:"
-msgstr "ኢሜያል አድራሻ"
-
-#: standalone/drakTermServ:1266
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "የፋይል ስም"
-
-#: standalone/drakTermServ:1274
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "የፋይል ስም"
-
-#: standalone/drakTermServ:1285
-#, fuzzy, c-format
-msgid "IP Range Start:"
-msgstr "አዲስ ዝርዝር ጀምር"
-
-#: standalone/drakTermServ:1286
-#, fuzzy, c-format
-msgid "IP Range End:"
-msgstr "አሁን ያለውን ጨዋታ ጨርስ"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "&ለውጡ"
-
-#: standalone/drakTermServ:1346
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr ""
-
-#: standalone/drakTermServ:1519
-#, fuzzy, c-format
-msgid "Could not access the floppy!"
-msgstr "ጽሑፉን መክፈት አልተቻለም"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr ""
-
-#: standalone/drakTermServ:1530
-#, fuzzy, c-format
-msgid "PXE image is %s/%s"
-msgstr "ትርጉሙ &ጅምር ነው"
-
-#: standalone/drakTermServ:1532
-#, fuzzy, c-format
-msgid "Error writing %s/%s"
-msgstr "በሚጻፍበት ወቅት ስህተት ተከስቷል፦ "
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr ""
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, fuzzy, c-format
-msgid "%s is not a user..\n"
-msgstr "ፋይሉ '%s' አይነበብም"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr ""
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr ""
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr ""
-
-#: standalone/drakTermServ:1759
-#, fuzzy, c-format
-msgid "Deleted %s...\n"
-msgstr "የጠፋ"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, fuzzy, c-format
-msgid "%s not found...\n"
-msgstr "አልተገኘም"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr ""
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "ስህተት!"
-
-#: standalone/drakautoinst:39
-#, fuzzy, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "መደበኛ የሆነውን የፋይል አመራረጥ በመጠቀም ሸሯቅብን ማግኘት አይቻልም"
-
-#: standalone/drakautoinst:41
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "አዲስ ተጨማሪ ፕሮግራም አስገባ"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr ""
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, fuzzy, c-format
-msgid "manual"
-msgstr "መመሪያ"
-
-#: standalone/drakautoinst:64
-#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "አውቶማቲክ የአምድ መጠን"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr ""
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr ""
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr ""
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, fuzzy, c-format
-msgid "Congratulations!"
-msgstr "እንኳን ደስ ያለዎ!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: standalone/drakautoinst:289
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "ሲስተም ትከል"
-
-#: standalone/drakautoinst:358
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "ዕቃ አጥፋ"
-
-#: standalone/drakautoinst:365
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "የተመረጠው ዕቃ አስወግድ"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr ""
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "አሮጌ የተጠቃሚ ዝርዝር:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "አዲስ የተጠቃሚ ዝርዝር:\n"
-
-#: standalone/drakbackup:511
-#, fuzzy, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr "የሶፍትዌሩን ችግር ዘግብ"
-
-#: standalone/drakbackup:512
-#, fuzzy, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr "የስሕተቱን ጉዳይ አቅርብ"
-
-#: standalone/drakbackup:518
-#, fuzzy, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr "የስሕተቱን ጉዳይ አቅርብ"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, fuzzy, c-format
-msgid "Total progress"
-msgstr "ተሻሽሏል"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-
-#: standalone/drakbackup:612
-#, fuzzy, c-format
-msgid "Cannot spawn %s."
-msgstr "ፕሮግራሙን ማስኬድ አልተቻለም።"
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
-
-#: standalone/drakbackup:630
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
-
-#: standalone/drakbackup:632
-#, fuzzy, c-format
-msgid "Can not find %s on %s"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: standalone/drakbackup:636
-#, fuzzy, c-format
-msgid "%s not responding"
-msgstr "አልተገኘም"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr ""
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
-
-#: standalone/drakbackup:699
-#, fuzzy, c-format
-msgid "Not erasable media!"
-msgstr "ማንበብ አልቻለም፦ "
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
-
-#: standalone/drakbackup:826
-#, fuzzy, c-format
-msgid "No tape in %s!"
-msgstr "ምንም ሰነድ አልተገኘም  በ:"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, fuzzy, c-format
-msgid "Backup system files..."
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr ""
-
-#: standalone/drakbackup:1023
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:1057
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: standalone/drakbackup:1063
-#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "ለማስቀመጥ ምንም የፋይል ስም የለም"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr "ፈጣን ደብዳቤ"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-
-#: standalone/drakbackup:1123
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr ""
-"በሚያትምበት ጊዜ ስህተት ተከስቷል።\n"
-"\n"
-"%s"
-
-#: standalone/drakbackup:1153
-#, fuzzy, c-format
-msgid "Can not create catalog!"
-msgstr "'%s' ሰነድ መፍጠር አልተቻለም"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr ""
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, fuzzy, c-format
-msgid "Use Incremental Backups"
-msgstr "ከቀኝ ወደ ግራ ተራ ተጠቀም"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, fuzzy, c-format
-msgid "Use Differential Backups"
-msgstr "ከቀኝ ወደ ግራ ተራ ተጠቀም"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr ""
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "ተመረጠው ይወገድ"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "ተጠቃሚዎች"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr ""
-
-#: standalone/drakbackup:1598
-#, fuzzy, c-format
-msgid "Net Method:"
-msgstr "የX ዘገባ የማስትገባት ዘዴ"
-
-#: standalone/drakbackup:1602
-#, fuzzy, c-format
-msgid "Use Expect for SSH"
-msgstr "ለህብሩ የglyph  ቅርጽ አወጣት ተጠቀም"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "አሁኑኑ ይተላለፍ"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr ""
-
-#: standalone/drakbackup:1610
-#, fuzzy, c-format
-msgid "Host name or IP."
-msgstr "የስም/አስተያየት ትርጉሞችን ጨምር ወይም አስቀምጥ"
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "ይህን ሚስጢራዊ ቃል አስታውስ"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr ""
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr ""
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr ""
-
-#: standalone/drakbackup:1749
-#, fuzzy, c-format
-msgid "Multisession CD"
-msgstr "CD ወደ"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr ""
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr ""
-
-#: standalone/drakbackup:1758
-#, fuzzy, c-format
-msgid " Erase Now "
-msgstr "አሁኑኑ ይተላለፍ"
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr ""
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr ""
-
-#: standalone/drakbackup:1768
-#, fuzzy, c-format
-msgid "DVDRAM device"
-msgstr "የመረብ ዕቃ"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr ""
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr ""
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr ""
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr ""
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr ""
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr ""
-
-#: standalone/drakbackup:1944
-#, fuzzy, c-format
-msgid "Enter the directory to save to:"
-msgstr "ለማስቀመጥ የፋይል ስም ምረጡ"
-
-#: standalone/drakbackup:1948
-#, fuzzy, c-format
-msgid "Directory to save to"
-msgstr "የ%sን ለውጦች አስቀምጣቸው"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, fuzzy, c-format
-msgid "CD-R / DVD-R"
-msgstr "CD ወደ"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "ሳምንታዊ"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "የተለየ"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "ጃንዩወሪ"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "ፌብሩወሪ"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "ማርች"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "ኤፕረል"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "ሜይ"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "ጁን"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "ጁላይ"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "ኦገስት"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "ሴፕቴምበር"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "ኦክተውበር"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "ኖቬምበር"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "ዲሴምበር"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "እሑድ"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "ሰኞ"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "ማክሰኞ"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "ረቡዕ"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "ሐሙስ"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "ዓርብ"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "ቅዳሜ"
-
-#: standalone/drakbackup:2096
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "በጥቅም ላይ ያለ"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr ""
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "ደቂቃ(ዎች)"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "ሰዓት(ኦች)"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "ቀን"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "ወር"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "አዘቦት ቀን"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr ""
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-
-#: standalone/drakbackup:2188
-#, fuzzy, c-format
-msgid "Please choose the compression type"
-msgstr "እባክዎ ያለ ሰነድን ይምረጡ"
-
-#: standalone/drakbackup:2192
-#, fuzzy, c-format
-msgid "Use .backupignore files"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, fuzzy, c-format
-msgid "SMTP server for mail:"
-msgstr "የመልዕክት ተጠሪ ሚስጢራዊ ቃል ያስፈልጋል"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "ምንድን ነው"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr ""
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr ""
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "ተጨማሪ ምርጫዎች"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr ""
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: standalone/drakbackup:2318
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "እባክዎ ለማሳየት የሚፈልጉትን ተጠቃሽ-መረጃ ይምረጡ:"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, fuzzy, c-format
-msgid "Across Network"
-msgstr "Name=መረብ"
-
-#: standalone/drakbackup:2321
-#, fuzzy, c-format
-msgid "On CD-R"
-msgstr "CD ወደ"
-
-#: standalone/drakbackup:2321
-#, fuzzy, c-format
-msgid "On Tape Device"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr ""
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr ""
-
-#: standalone/drakbackup:2381
-#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "እባክዎ ለማሳየት የሚፈልጉትን ተጠቃሽ-መረጃ ይምረጡ:"
-
-#: standalone/drakbackup:2382
-#, fuzzy, c-format
-msgid "Backup System"
-msgstr "Name=ሲስተም"
-
-#: standalone/drakbackup:2384
-#, fuzzy, c-format
-msgid "Select user manually"
-msgstr "የአቢወርድ ቋንቋ፦"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr ""
-
-#: standalone/drakbackup:2485
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr "ከምንጩ &አሻሽል"
-
-#: standalone/drakbackup:2486
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr "የቅርብ ጊዜ ፋይሎች"
-
-#: standalone/drakbackup:2488
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr "የቅርብ ጊዜ ፋይሎች"
-
-#: standalone/drakbackup:2490
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr "የቅርብ ጊዜ ፋይሎች"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr ""
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-
-#: standalone/drakbackup:2502
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr "የPhoto CD ፋይል"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr ""
-
-#: standalone/drakbackup:2504
-#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "የመረብ ዕቃ"
-
-#: standalone/drakbackup:2505
-#, fuzzy, c-format
-msgid " (multi-session)"
-msgstr "ክፍለ ጊዜው ክፈት..."
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr "ስታስቀምጥ በራስ-ገዝ .mo ሰነዶችን ገንባ"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: standalone/drakbackup:2513
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "ምርጫዎች"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr ""
-
-#: standalone/drakbackup:2520
-#, fuzzy, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:2521
-#, fuzzy, c-format
-msgid "\tSend mail to %s\n"
-msgstr "እንደገና የሚሰራ ምንም የለም።"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, fuzzy, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: standalone/drakbackup:2525
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr "በአየር"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: standalone/drakbackup:2527
-#, fuzzy, c-format
-msgid "\t-CD-R.\n"
-msgstr "ሲዲ"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr ""
-
-#: standalone/drakbackup:2529
-#, fuzzy, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "በተለወጠበት ቀን"
-
-#: standalone/drakbackup:2530
-#, fuzzy, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "በተለወጠበት ቀን"
-
-#: standalone/drakbackup:2531
-#, fuzzy, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "በተለወጠበት ቀን"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: standalone/drakbackup:2538
-#, fuzzy, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr "አሁን ያለውን ዝርዝር ተጠቀም"
-
-#: standalone/drakbackup:2540
-#, fuzzy, c-format
-msgid "- Restore System Files.\n"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, fuzzy, c-format
-msgid "   - from date: %s %s\n"
-msgstr "ከቀን መቁጠሩያው ላይ ቀኑን ይምረጡ"
-
-#: standalone/drakbackup:2545
-#, fuzzy, c-format
-msgid "- Restore User Files: \n"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:2550
-#, fuzzy, c-format
-msgid "- Restore Other Files: \n"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:2729
-#, fuzzy, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr "GHex (%s)፦ ዳታ ፈልግ"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
-
-#: standalone/drakbackup:2763
-#, fuzzy, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: standalone/drakbackup:2883
-#, fuzzy, c-format
-msgid "         Restore Configuration       "
-msgstr "የማስተካከያው አራሚ"
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr ""
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: standalone/drakbackup:2992
-#, fuzzy, c-format
-msgid "Please choose the date to restore:"
-msgstr "እባክዎ ለማሳየት የሚፈልጉትን ተጠቃሽ-መረጃ ይምረጡ:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr ""
-
-#: standalone/drakbackup:3035
-#, fuzzy, c-format
-msgid "Directory with backups"
-msgstr "አኃዞች (ከክፍተት ጋር)"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr ""
-
-#: standalone/drakbackup:3091
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "ሌላ ምርጫዎች"
-
-#: standalone/drakbackup:3096
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Name=ሲስተም"
-
-#: standalone/drakbackup:3097
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "ምርጫዎችን ይመልሱ"
-
-#: standalone/drakbackup:3098
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "ሌላ ምርጫዎች"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr ""
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, fuzzy, c-format
-msgid "Path To Restore To"
-msgstr "የ መረጃ-ባንክ ዱካ"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-
-#: standalone/drakbackup:3197
-#, fuzzy, c-format
-msgid "Search Backups"
-msgstr "መፈለጊያ ዱካ"
-
-#: standalone/drakbackup:3215
-#, fuzzy, c-format
-msgid "No matches found..."
-msgstr "ምንም ጽሑፍ አልተገኘም"
-
-#: standalone/drakbackup:3219
-#, fuzzy, c-format
-msgid "Restore Selected"
-msgstr "የተመረጠው ፋይሎች (_S)"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-
-#: standalone/drakbackup:3369
-#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "ምንም ተጨማሪ ፕሮግራም አልተመረጠም"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr ""
-
-#: standalone/drakbackup:3459
-#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "የPhoto CD ፋይል"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "ከምንጩ &አሻሽል"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3484
-#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "የቀይ ባርኔታ መረብ"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "የእንግዳ ተቀባይ ስም"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr ""
-
-#: standalone/drakbackup:3493
-#, fuzzy, c-format
-msgid "Password required"
-msgstr "ሚስጥር-ቃል ያስፈልጋል"
-
-#: standalone/drakbackup:3499
-#, fuzzy, c-format
-msgid "Username required"
-msgstr "ሚስጥር-ቃል ያስፈልጋል"
-
-#: standalone/drakbackup:3502
-#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "ሚስጥር-ቃል ያስፈልጋል"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr ""
-
-#: standalone/drakbackup:3520
-#, fuzzy, c-format
-msgid "Files Restored..."
-msgstr "የቅርብ ጊዜ ፋይሎች"
-
-#: standalone/drakbackup:3523
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "ምርጫዎችን ይመልሱ"
-
-#: standalone/drakbackup:3541
-#, fuzzy, c-format
-msgid "%s not retrieved..."
-msgstr "አልተገኘም"
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, fuzzy, c-format
-msgid "Search for files to restore"
-msgstr "ፋይሎች ለማግኘት ይህንን ኮምፒውተር አስስ"
-
-#: standalone/drakbackup:3766
-#, fuzzy, c-format
-msgid "Restore all backups"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:3774
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "ምርጫዎችን ይመልሱ"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "ከማውጫን አስወግድ (_V)"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr ""
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr ""
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr ""
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr ""
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr ""
-
-#: standalone/drakbackup:3825
-#, fuzzy, c-format
-msgid "Directory To Restore From"
-msgstr "በዝርዝር ውስጥ ዶሴ ጨምር"
-
-#: standalone/drakbackup:3861
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "ተሻሽሏል"
-
-#: standalone/drakbackup:3972
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "መለያ አስገባ"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "ወደ መጀመሪያው መልስ"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr ""
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr ""
-
-#: standalone/drakbackup:4160
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:4163
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:4166
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, fuzzy, c-format
-msgid "Total Progress"
-msgstr "ተሻሽሏል"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr ""
-
-#: standalone/drakbackup:4198
-#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "የቅርብ ጊዜ ፋይሎች"
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr ""
-
-#: standalone/drakbackup:4273
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "ይህንን ሰነድ ተመልከት"
-
-#: standalone/drakbackup:4299
-#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: standalone/drakbackup:4304
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: standalone/drakbackup:4309
-#, fuzzy, c-format
-msgid "View Configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: standalone/drakbackup:4313
-#, fuzzy, c-format
-msgid "View Last Log"
-msgstr "የመጨረሻ ገጽ አሳይ"
-
-#: standalone/drakbackup:4318
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "አሁኑኑ ይተላለፍ"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr ""
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/ፋይል (_F)"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/ፋይል (F)/ውጣ (_Q)"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-
-#: standalone/drakboot:127
-#, fuzzy, c-format
-msgid "Do you want to configure it now?"
-msgstr "ምርጫውን መሞከር ይፈልጋሉ?"
-
-#: standalone/drakboot:136
-#, fuzzy, c-format
-msgid "Install themes"
-msgstr "ሲስተም ትከል"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr ""
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "ጭብጥ"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-
-#: standalone/drakboot:151
-#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "አዲስ ሰነድ ፍጠር"
-
-#: standalone/drakboot:183
-#, fuzzy, c-format
-msgid "Default user"
-msgstr "የተጠቃሚ ስም"
-
-#: standalone/drakboot:184
-#, fuzzy, c-format
-msgid "Default desktop"
-msgstr "የነበረው _ሠሌዳ"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr ""
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: standalone/drakboot:195
-#, fuzzy, c-format
-msgid "System mode"
-msgstr "የመሸፈኛ ዘዴ"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, fuzzy, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "አንቀጹን መሀል ኩልኩል አድርግ"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "የMandriva Linux ቁጥጥር ማእከል"
-
-#: standalone/drakbug:48
-#, fuzzy, c-format
-msgid "Synchronization tool"
-msgstr "የመስሪያውን ምልክት"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "/መሣሪያዎች/Toolbox"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr ""
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr ""
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr ""
-
-#: standalone/drakbug:54
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "ምስል መቆጣጠሪያ"
-
-#: standalone/drakbug:55
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "ማውጫዎች &አስተዳዳሪ"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr ""
-
-#: standalone/drakbug:57
-#, fuzzy, c-format
-msgid "Windows Migration tool"
-msgstr "የመስሪያውን ፍንጭ አሳይ"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "የማስተካከያው አራሚ"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr ""
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-
-#: standalone/drakbug:85
-#, fuzzy, c-format
-msgid "Find Package"
-msgstr "ሐረጉን ፈልግ"
-
-#: standalone/drakbug:87
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "ጥቅል"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "ሪፖርት"
-
-#: standalone/drakbug:163
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "አልተገኘም"
-
-#: standalone/drakbug:175
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "ማንበብ አልቻለም፦ "
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr ""
-
-#: standalone/drakclock:39
-#, fuzzy, c-format
-msgid "not defined"
-msgstr "አልተገኘም"
-
-#: standalone/drakclock:41
-#, fuzzy, c-format
-msgid "Change Time Zone"
-msgstr "ቀን እና ሰዓት"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr ""
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr ""
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr ""
-
-#: standalone/drakclock:75
-#, fuzzy, c-format
-msgid "Network Time Protocol"
-msgstr "ቀን እና ሰዓት"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr ""
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "ተጠሪ፦"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "እንደነበረ አድረግ"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-
-#: standalone/drakconnect:86
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "የቀይ ባርኔታ መረብ"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr ""
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, fuzzy, c-format
-msgid "Interface:"
-msgstr "የተጠቃሚው እይታ"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "ይጠብቁ እባክዎ"
-
-#: standalone/drakconnect:117
-#, fuzzy, c-format
-msgid "Interface"
-msgstr "የተጠቃሚው እይታ"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "ሁኔታ"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "የእንግዳ ተቀባይ ስም፦ "
-
-#: standalone/drakconnect:136
-#, fuzzy, c-format
-msgid "Configure hostname..."
-msgstr "ፕሮግራሙን አስተካክል"
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "የቅርብ መረብ ምርጫ"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr ""
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "ተጠቀም"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "ግንኙነቶችን ይቆጣጠሩ"
-
-#: standalone/drakconnect:225
-#, fuzzy, c-format
-msgid "Device selected"
-msgstr "የተመረጠው ፋይሎች (_S)"
-
-#: standalone/drakconnect:307
-#, fuzzy, c-format
-msgid "IP configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr ""
-
-#: standalone/drakconnect:354
-#, fuzzy, c-format
-msgid "Search Domain"
-msgstr "የObjectDirectory ዶሜን"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr ""
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "የፍሰት ቁጥጥር"
-
-#: standalone/drakconnect:527
-#, fuzzy, c-format
-msgid "Line termination"
-msgstr " መለያ መስመር፦"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr ""
-
-#: standalone/drakconnect:542
-#, fuzzy, c-format
-msgid "Use lock file"
-msgstr "ፋይሉ በፊትም ነበር። የ-yes ምርጫን ተጠቀሙ።"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr ""
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "እባክዎ ይጠብቁ.."
-
-#: standalone/drakconnect:552
-#, fuzzy, c-format
-msgid "Modem sound"
-msgstr "ድምፅ የለም"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "ይቻል"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "አይቻል"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr ""
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, fuzzy, c-format
-msgid "Module name"
-msgstr "የፋይል ስም አቅድ"
-
-#: standalone/drakconnect:606
-#, fuzzy, c-format
-msgid "Mac Address"
-msgstr "ኢሜያል አድራሻ"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr ""
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, fuzzy, c-format
-msgid "Location on the bus"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: standalone/drakconnect:715
-#, fuzzy, c-format
-msgid "Remove a network interface"
-msgstr "የአቢወርድ ቋንቋ፦"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr ""
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr ""
-
-#: standalone/drakconnect:768
-#, fuzzy, c-format
-msgid "No IP"
-msgstr "የማተሚያ IP"
-
-#: standalone/drakconnect:769
-#, fuzzy, c-format
-msgid "No Mask"
-msgstr "ፋይል የለም"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "ወደላይ"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "ወደታች"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "ተገናኝቷል"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "አልተገናኘም"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "ግንኙነት አቋርጥ..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr ""
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/drakconnect:874
-#, fuzzy, c-format
-msgid "Deactivate now"
-msgstr "አሁኑኑ ይተላለፍ"
-
-#: standalone/drakconnect:874
-#, fuzzy, c-format
-msgid "Activate now"
-msgstr "አሁኑኑ ይተላለፍ"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "የቅርብ መረብ ምርጫ"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr ""
-
-#: standalone/drakconnect:918
-#, fuzzy, c-format
-msgid "Started on boot"
-msgstr "መረጃ በ%s መጠቀሚያ ፕሮግራም ላይ"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, fuzzy, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "የአቢወርድ ቋንቋ፦"
-
-#: standalone/drakconnect:1017
-#, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "የኢንተርኔት ሰዓትን ተጠቀም"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr ""
-
-#: standalone/drakconnect:1057
-#, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "የኢንተርኔት ሰዓትን ተጠቀም"
-
-#: standalone/drakconnect:1058
-#, fuzzy, c-format
-msgid "Internet access"
-msgstr "Name=ኢንተርኔት"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, fuzzy, c-format
-msgid "Connection type: "
-msgstr "የፋይሉ ዓይነት"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "ሁኔታ፦"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, fuzzy, c-format
-msgid "XDM (X Display Manager)"
-msgstr "የአቢወርድ የተጨማሪ ፕሮግራም አስተዳደር"
-
-#: standalone/drakedm:55
-#, fuzzy, c-format
-msgid "Choosing a display manager"
-msgstr "የአቢወርድ የተጨማሪ ፕሮግራም አስተዳደር"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr ""
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr ""
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "አጠቃላይ"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "መሳሪያ"
-
-#: standalone/drakfloppy:88
-#, fuzzy, c-format
-msgid "Kernel version"
-msgstr "ቅጂውን አጣራ"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "ምርጫዎች"
-
-#: standalone/drakfloppy:117
-#, fuzzy, c-format
-msgid "Advanced preferences"
-msgstr "ምርጫዎችን ይምረጡ"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "መጠን"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr ""
-
-#: standalone/drakfloppy:141
-#, fuzzy, c-format
-msgid "force"
-msgstr "ጽሁፉን ከቀኝ ወደግራ አስገድድ"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr ""
-
-#: standalone/drakfloppy:143
-#, fuzzy, c-format
-msgid "if needed"
-msgstr "አስቀምጥ (__S__) (አስፈላጊ)"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr ""
-
-#: standalone/drakfloppy:147
-#, fuzzy, c-format
-msgid "Add a module"
-msgstr "ሰነዶችን ጨምር"
-
-#: standalone/drakfloppy:156
-#, fuzzy, c-format
-msgid "Remove a module"
-msgstr "የገጹን እራስጌ አጥፋ"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: standalone/drakfloppy:300
-#, fuzzy, c-format
-msgid "Unable to fork: %s"
-msgstr "እንደገና የሚሰራ ምንም የለም።"
-
-#: standalone/drakfloppy:303
-#, fuzzy, c-format
-msgid "Floppy creation completed"
-msgstr " የመጨረሻው መስመር ተጠናቋል።"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-
-#: standalone/drakfont:183
-#, fuzzy, c-format
-msgid "Search installed fonts"
-msgstr "&መረጃውን አስስ"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: standalone/drakfont:208
-#, fuzzy, c-format
-msgid "parse all fonts"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakfont:210
-#, fuzzy, c-format
-msgid "No fonts found"
-msgstr "ምንም ጽሑፍ አልተገኘም"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "አልቋል"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr ""
-
-#: standalone/drakfont:258
-#, fuzzy, c-format
-msgid "Reselect correct fonts"
-msgstr "ይህ ትክክል ነው?"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr ""
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "%s የፊደላት ለውጥ"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "የፊደላት ቅጂ"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr ""
-
-#: standalone/drakfont:335
-#, fuzzy, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "ሲያትም እባክዎ ይጠብቁ\n"
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr ""
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, fuzzy, c-format
-msgid "type1inst building"
-msgstr "የሰነድ ግንባታ..."
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: standalone/drakfont:361
-#, fuzzy, c-format
-msgid "Suppress Temporary Files"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakfont:364
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "እንደገና አታስነሳ"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, fuzzy, c-format
-msgid "Suppress Fonts Files"
-msgstr "ሁሉንም የምስል ፋይሎች"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "xfsን እንደገና ጀምር"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr ""
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "የፊደል ዝርዝር"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "ስለ"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "አፍርስ"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "ከውጭ አስገባ"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr ""
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "ጎስትስክሪፕት"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr ""
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "አቢወርድ"
-
-#: standalone/drakfont:569
-#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "ሁሉም ማተሚያዎች"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: standalone/drakfont:586
-#, fuzzy, c-format
-msgid "File Selection"
-msgstr "የተመረጠውን አጥፉ"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, fuzzy, c-format
-msgid "Import fonts"
-msgstr "የፊደል ቅርጽ ክተቱ"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "ፊደላት ትከል"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "እርግጠኛ ከሆኑ፤ እዚህ ላይ ይጫኑ።"
-
-#: standalone/drakfont:695
-#, fuzzy, c-format
-msgid "here if no."
-msgstr "(ስለ ቃላት አጻጻፍ አስተያየት የለም)"
-
-#: standalone/drakfont:734
-#, fuzzy, c-format
-msgid "Unselected All"
-msgstr "ሁሉንም &ተዉት"
-
-#: standalone/drakfont:737
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "ሁሉንም &ተዉት"
-
-#: standalone/drakfont:740
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "ከዝርዝር አጥፋ (_R)"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, fuzzy, c-format
-msgid "Importing fonts"
-msgstr "የፊደል ቅርጽ ክተቱ"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "የመጀመሪያ ሙከራዎች"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "ፊደላትን ወደ ሲስተሜ ቅዳ"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "ፊደላትን ትከል እና ለውጥ"
-
-#: standalone/drakfont:758
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "ሲስተም ትከል"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "ከሲስተሜ ውስጥ ፊደላትን አስወግድ"
-
-#: standalone/drakfont:777
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "ፖስታ ቤት"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, fuzzy, c-format
-msgid "Internet Connection Sharing"
-msgstr "የኢንተርኔት ሰዓትን ተጠቀም"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr ""
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "ይቻል"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr ""
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr ""
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr ""
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr ""
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "አይቻል"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr ""
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr ""
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: standalone/drakgw:236
-#, fuzzy, c-format
-msgid "Interface %s (using module %s)"
-msgstr "የፋይል ስም አቅድ"
-
-#: standalone/drakgw:237
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "የተጠቃሚው እይታ"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: standalone/drakgw:253
-#, fuzzy, c-format
-msgid "Network interface"
-msgstr "የተጠቃሚው እይታ"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "የመረቡን እይታ ይምረጡ"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr ""
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: standalone/drakgw:296
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "ራስ-ገዝ ትርጉሞች"
-
-#: standalone/drakgw:296
-#, fuzzy, c-format
-msgid "No (experts only)"
-msgstr "ሙሉ ቃላት ብቻ"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr ""
-
-#: standalone/drakgw:298
-#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "የአቢወርድ ቋንቋ፦"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakgw:319
-#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "የቀይ ባርኔታ መረብ"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(ይህ) የDHCP ሰርቨር IP "
-
-#: standalone/drakgw:328
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: standalone/drakgw:329
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: standalone/drakgw:330
-#, fuzzy, c-format
-msgid "The DHCP start range"
-msgstr "አዲስ ዝርዝር ጀምር"
-
-#: standalone/drakgw:331
-#, fuzzy, c-format
-msgid "The DHCP end range"
-msgstr "አሁን ያለውን ጨዋታ ጨርስ"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr ""
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr ""
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-
-#: standalone/drakhelp:22
-#, fuzzy, c-format
-msgid " --help                - display this help     \n"
-msgstr "የመረጃ ማውጫ አሳይ"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-
-#: standalone/drakhelp:36
-#, fuzzy, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "አንቀጹን መሀል ኩልኩል አድርግ"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "የስይስተም ምርጫዎች"
-
-#: standalone/drakperm:23
-#, fuzzy, c-format
-msgid "Custom settings"
-msgstr "የአሁኑን ምርጫዎች"
-
-#: standalone/drakperm:24
-#, fuzzy, c-format
-msgid "Custom & system settings"
-msgstr "Comment=የመደቡ ይዞታዎች"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr ""
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "መተላለፊያ"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "ተጠቃሚ"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "የውይይት መድረክ"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "ፈቃዶች"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, fuzzy, c-format
-msgid "Edit current rule"
-msgstr "የአሁኑን ግለ መግለጫ _ያስተካክሉ..."
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "ወደላይ"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "ወደታች"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr ""
-
-#: standalone/drakperm:123
-#, fuzzy, c-format
-msgid "Add a rule"
-msgstr "ሰነዶችን ጨምር"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr ""
-
-#: standalone/drakperm:124
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "የተመረጠው መለያ ምልክቶች አጥፉ"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "አስተካክል"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "ቃኝ"
-
-#: standalone/drakperm:248
-#, fuzzy, c-format
-msgid "user"
-msgstr "ጥቅም"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "መድረክ"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "ሌላ"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "አንብብ"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, fuzzy, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "ለፋይል %s መጻፍ አልተቻለም"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "ይጻፍ"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, fuzzy, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "ለፋይል %s መጻፍ አልተቻለም"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "አስኪድ"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, fuzzy, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "ለፋይል %s መጻፍ አልተቻለም"
-
-#: standalone/drakperm:273
-#, fuzzy, c-format
-msgid "Sticky-bit"
-msgstr "8 _bit PCM"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: standalone/drakperm:274
-#, fuzzy, c-format
-msgid "Set-UID"
-msgstr "ቋንቋን &ይምረጡ"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr ""
-
-#: standalone/drakperm:275
-#, fuzzy, c-format
-msgid "Set-GID"
-msgstr "ቋንቋን &ይምረጡ"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr ""
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "ተጠቃሚ፦"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "የውይይት መድረክ፦"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "የአሁኑ ተጠቃሚ"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr ""
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "የመንገድ ምርጫ"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "ፀባይ"
-
-#: standalone/drakpxe:55
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: standalone/drakpxe:111
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "ቀዳሚ ተጠሪ ይጠቀም"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-
-#: standalone/drakpxe:144
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "የቀይ ባርኔታ መረብ"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:173
-#, fuzzy, c-format
-msgid "The DHCP start ip"
-msgstr "አዲስ ዝርዝር ጀምር"
-
-#: standalone/drakpxe:174
-#, fuzzy, c-format
-msgid "The DHCP end ip"
-msgstr "አሁን ያለውን ጨዋታ ጨርስ"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:192
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "አዲስ ዶሴ ሰይም"
-
-#: standalone/drakpxe:196
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "ምንም ጽሑፍ አልተገኘም"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr ""
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "የአሠራሩ ዘዴ"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "ጣቢያ"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr ""
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr ""
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr ""
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr ""
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr ""
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "አጥፋ"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr ""
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr ""
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr ""
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr ""
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "አድስ"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "አብራ"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "ሁሉም"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "የቅርብ"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "ይተዉ"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, fuzzy, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr "መግለጫ የለም"
-
-#: standalone/draksec:168
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr "ዕሴት የለም"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "የደህንነት ደረጃ፦"
-
-#: standalone/draksec:217
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "የደህንነት ደረጃ፦"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "መሠረታዊ ምርጫዎች"
-
-#: standalone/draksec:233
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "ምርጫዎችን አስገባ"
-
-#: standalone/draksec:233
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "ምርጫዎችን አስገባ"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr ""
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr ""
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr ""
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "የጽሑፍ ስፋት"
-
-#: standalone/draksplash:35
-#, fuzzy, c-format
-msgid "text box height"
-msgstr "በእርዝማኔው ልክ"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:38
-#, fuzzy, c-format
-msgid "the width of the progress bar"
-msgstr "&ስታቱስ ባር አሳይ"
-
-#: standalone/draksplash:39
-#, fuzzy, c-format
-msgid "the height of the progress bar"
-msgstr "&ስታቱስ ባር አሳይ"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr ""
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "የጭብጥ ስም"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr ""
-
-#: standalone/draksplash:82
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "ጭብጥን አስቀምጥ (_S)"
-
-#: standalone/draksplash:130
-#, fuzzy, c-format
-msgid "saving Bootsplash theme..."
-msgstr "ጭብጥን በሌላ ስም _አስቀምጥ..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "ምስል ይመረጥ"
-
-#: standalone/draksplash:162
-#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "የተመረጠውን ከላይ አስምሩ (ቀያይሩ)"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, fuzzy, c-format
-msgid "Add an UPS device"
-msgstr "አምድ በኋላ ጨምር"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr ""
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "የተሻሻለ ዊድጌት ፍጠር"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "እንኳን ደስ ያለዎ!"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr ""
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr ""
-
-#: standalone/drakups:128 standalone/drakups:140
-#, fuzzy, c-format
-msgid "UPS driver configuration"
-msgstr "ተስተካክሎ የተቀመጠውን ባዕድ መነሻ ጥቀስ"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr ""
-
-#: standalone/drakups:129
-#, fuzzy, c-format
-msgid "Manufacturer / Model:"
-msgstr "<b>ሞዴል</b>፦ %s<br>"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "ስም፦"
-
-#: standalone/drakups:145
-#, fuzzy, c-format
-msgid "The name of your ups"
-msgstr "ኤ-መልዕክት አድራሻዎ"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "ፖርት፦"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr ""
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr ""
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr ""
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "ስም"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr ""
-
-#: standalone/drakups:285
-#, fuzzy, c-format
-msgid "Access Control Lists"
-msgstr "አፈንጋጭ እንግዳ መቆጣጠሪያ"
-
-#: standalone/drakups:286
-#, fuzzy, c-format
-msgid "IP mask"
-msgstr "የማተሚያ IP"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr ""
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "ተግባር"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "ደረጃ"
-
-#: standalone/drakups:299
-#, fuzzy, c-format
-msgid "ACL name"
-msgstr "የፋይል ስም"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr ""
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr ""
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr ""
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr ""
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr ""
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr ""
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr ""
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr ""
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr ""
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, fuzzy, c-format
-msgid "Simple VPN setup."
-msgstr "አሁኑ የተቋቋመውን _አስቀምጡ"
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, fuzzy, c-format
-msgid "Kernel module."
-msgstr "የፋይል ስም አቅድ"
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#: standalone/drakvpn:292
-#, fuzzy, c-format
-msgid "Security Policies"
-msgstr "የደህንነት ደረጃ፦"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr ""
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, fuzzy, c-format
-msgid "Configuration file"
-msgstr "የፋይሉ ዓይነት"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, fuzzy, c-format
-msgid "%s entries"
-msgstr "የተመረጡት ይጥፉ?"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr ""
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr ""
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-
-#: standalone/drakvpn:368
-#, fuzzy, c-format
-msgid "ipsec.conf entries"
-msgstr "የተመረጡት ይጥፉ?"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "config setup"
-msgstr "የገጽ ቅንጅት"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "conn %default"
-msgstr "የነበረው ፊደል ቅርጽ"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "normal conn"
-msgstr "%% የተለመደ መጠን"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, fuzzy, c-format
-msgid "Exists!"
-msgstr "ፋይሉ በፊትም ነበር!"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr ""
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr ""
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr ""
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr ""
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr ""
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr ""
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr ""
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr ""
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr ""
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr ""
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "ግራ"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr ""
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr ""
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr ""
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:491
-#, fuzzy, c-format
-msgid "section name"
-msgstr "የፋይል ስም"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr ""
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "በራሱ አሻሻይ"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "ቀኝ"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr ""
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr ""
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr ""
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, fuzzy, c-format
-msgid "Edit section"
-msgstr "የክፍል መክፈያዎች"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, fuzzy, c-format
-msgid "Section names"
-msgstr "የተባባሪዎች ስሞች"
-
-#: standalone/drakvpn:590
-#, fuzzy, c-format
-msgid "Can not edit!"
-msgstr "የገጽ ግርጌውን ያስተካክሉ"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, fuzzy, c-format
-msgid "Remove section"
-msgstr "የክፍል መክፈያዎች"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-
-#: standalone/drakvpn:728
-#, fuzzy, c-format
-msgid "racoonf.conf entries"
-msgstr "የተመረጡት ይጥፉ?"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "መተላለፊያ"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "የርቀት"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#: standalone/drakvpn:746
-#, fuzzy, c-format
-msgid "path type"
-msgstr "የፋይሉ ዓይነት"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, fuzzy, c-format
-msgid "real file"
-msgstr "የፋይሉ ዓይነት"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:862
-#, fuzzy, c-format
-msgid "path_type"
-msgstr "የፋይሉ ዓይነት"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, fuzzy, c-format
-msgid "Sainfo source address"
-msgstr "የቡድኑ ኤ-መልዕክት አድራሻ"
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#: standalone/drakvpn:941
-#, fuzzy, c-format
-msgid "Sainfo source protocol"
-msgstr "ስለ &Open Source"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, fuzzy, c-format
-msgid "Sainfo destination address"
-msgstr "የቡድኑ ኤ-መልዕክት አድራሻ"
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr ""
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, fuzzy, c-format
-msgid "PFS group"
-msgstr "አዲስ መድረክ"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, fuzzy, c-format
-msgid "Lifetime number"
-msgstr "የዐምድ ብዛት"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr ""
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr ""
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "የሩቅ"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, fuzzy, c-format
-msgid "Exchange mode"
-msgstr "የመሸፈኛ ዘዴ"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, fuzzy, c-format
-msgid "Generate policy"
-msgstr "ዳታቤዝ አምንጭ"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr ""
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, fuzzy, c-format
-msgid "Certificate type"
-msgstr "የፋይሉ ዓይነት"
-
-#: standalone/drakvpn:1083
-#, fuzzy, c-format
-msgid "My certfile"
-msgstr "የኔ ቇቋንቋዎች"
-
-#: standalone/drakvpn:1084
-#, fuzzy, c-format
-msgid "Name of the certificate"
-msgstr "የምስክር ፀባይ"
-
-#: standalone/drakvpn:1085
-#, fuzzy, c-format
-msgid "My private key"
-msgstr "ቁልፉን \"%s\" NULL ነው"
-
-#: standalone/drakvpn:1086
-#, fuzzy, c-format
-msgid "Name of the private key"
-msgstr "ቁልፉን \"%s\" NULL ነው"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr ""
-
-#: standalone/drakvpn:1088
-#, fuzzy, c-format
-msgid "Name of the peers certificate"
-msgstr "የምስክር አካል አይደለም"
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr ""
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, fuzzy, c-format
-msgid "My identifier"
-msgstr "የኔ ቇቋንቋዎች"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr ""
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr ""
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1126
-#, fuzzy, c-format
-msgid "DH group"
-msgstr "አዲስ መድረክ"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "ትእዛዝ"
-
-#: standalone/drakvpn:1134
-#, fuzzy, c-format
-msgid "Source IP range"
-msgstr "ስለ &Open Source"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr ""
-
-#: standalone/drakvpn:1136
-#, fuzzy, c-format
-msgid "Upper-layer protocol"
-msgstr "/ደረጃ/Merge Down"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "ማነኛውም"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "ባንዲራ"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "አቅጣጫ"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr ""
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr ""
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr ""
-
-#: standalone/drakvpn:1145
-#, fuzzy, c-format
-msgid "Source/destination"
-msgstr "የፕሮግራም ረቂቅ"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "ቀዳሚ"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "ጥቅም"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "የተለየ"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "አሜሪካ (ስርጭት)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "አሜሪካ (cable)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "ኣሜሪካ (cable-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "ካናዳ (ኬብል)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "ጃፓን (ስርጭት)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "ጃፓን (ኬብል)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "ቻይና (ስርጭት)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "ምዕራብ አውሮፓ"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "ምስራቅ አውሮፓ"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "ፈረንሳይ [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "ኒውዚላንድ"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr ""
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "አካባቢ፦"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr ""
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr ""
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "መልካም ቀን ይሁንልዎ!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr ""
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr ""
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr ""
-
-#: standalone/harddrake2:39
-#, fuzzy, c-format
-msgid "Old device file"
-msgstr "ጥሩው የፋይል ዓይነት"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
-
-#: standalone/harddrake2:41
-#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "አዲስ ሰነድ ፍጠር"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "አቅድ"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "Extended partitions"
-msgstr "አዲስ ሰነድ ፍጠር"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "the number of extended partitions"
-msgstr "የዐምድ ብዛት"
-
-#: standalone/harddrake2:47
-#, fuzzy, c-format
-msgid "Geometry"
-msgstr "እንደገና ይሞከር"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, fuzzy, c-format
-msgid "Disk controller"
-msgstr "የSMBus ተቆጣጣሪዎች"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, fuzzy, c-format
-msgid "class of hardware device"
-msgstr "እንደ ሀርድዌር አሳይ"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "ሞዴል"
-
-#: standalone/harddrake2:50
-#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "የማተሚያውን ሞዴል ምረጡ"
-
-#: standalone/harddrake2:51
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "Primary partitions"
-msgstr "የጽሑፍ ማስተካከያ"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "the number of the primary partitions"
-msgstr "የዐምድ ብዛት"
-
-#: standalone/harddrake2:53
-#, fuzzy, c-format
-msgid "the vendor name of the device"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr ""
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device #"
-msgstr "መሳሪያ"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device number"
-msgstr "የዐምድ ብዛት"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, fuzzy, c-format
-msgid "PCI function number"
-msgstr "የፋይል ስም"
-
-#: standalone/harddrake2:57
-#, fuzzy, c-format
-msgid "Vendor ID"
-msgstr "መለያ አስገባ"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "Device ID"
-msgstr "መሳሪያ: "
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "Sub device ID"
-msgstr "መሳሪያ"
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: standalone/harddrake2:61
-#, fuzzy, c-format
-msgid "Device USB ID"
-msgstr "መሳሪያ: "
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-
-#: standalone/harddrake2:66
-#, fuzzy, c-format
-msgid "Cache size"
-msgstr "የፊደል ቅርጽ መጠን፦"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr ""
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, fuzzy, c-format
-msgid "Coma bug"
-msgstr "የሶፍትዌሩን ችግር ዘግብ"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, fuzzy, c-format
-msgid "Cpuid family"
-msgstr "የፊደል ቅርጽ ቤተሰብ"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr ""
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid ደረጃ"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "ባንዲራዎች፦"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
-
-#: standalone/harddrake2:74
-#, fuzzy, c-format
-msgid "Fdiv bug"
-msgstr "የሶፍትዌሩን ችግር ዘግብ"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, fuzzy, c-format
-msgid "Is FPU present"
-msgstr "ባትሪ፦ የለም"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, fuzzy, c-format
-msgid "F00f bug"
-msgstr "የሶፍትዌሩን ችግር ዘግብ"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-
-#: standalone/harddrake2:79
-#, fuzzy, c-format
-msgid "Halt bug"
-msgstr "የሶፍትዌሩን ችግር ዘግብ"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr ""
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "የሞዴል ስም"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:84
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "Name=ሲፒዩ"
-
-#: standalone/harddrake2:85
-#, fuzzy, c-format
-msgid "Processor ID"
-msgstr "መለያ አስገባ"
-
-#: standalone/harddrake2:85
-#, fuzzy, c-format
-msgid "the number of the processor"
-msgstr "የዐምድ ብዛት"
-
-#: standalone/harddrake2:86
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "<b>ሞዴል</b>፦ %s<br>"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr ""
-
-#: standalone/harddrake2:87
-#, fuzzy, c-format
-msgid "the vendor name of the processor"
-msgstr "ሰነዶች/Word Processor"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "መጻፍ ከልካይ"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-
-#: standalone/harddrake2:92
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "ሠንጠረዥ ፎርማቱ"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr ""
-
-#: standalone/harddrake2:96
-#, fuzzy, c-format
-msgid "EIDE/SCSI channel"
-msgstr "/ደረጃ/አልፋ/Add Alpha Channel"
-
-#: standalone/harddrake2:97
-#, fuzzy, c-format
-msgid "Disk identifier"
-msgstr "የኔ ቇቋንቋዎች"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, fuzzy, c-format
-msgid "Logical unit number"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, fuzzy, c-format
-msgid "Installed size"
-msgstr "ሲስተም ትከል"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, fuzzy, c-format
-msgid "Enabled Size"
-msgstr "ይቻል"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, fuzzy, c-format
-msgid "type of the memory device"
-msgstr "የምስክር አካል አይደለም"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "ፍጥነት"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, fuzzy, c-format
-msgid "Bank connections"
-msgstr "ተጨማሪ ፕሮግራሞችን ተቆጣጠሩ"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, fuzzy, c-format
-msgid "Device file"
-msgstr "ጥሩው የፋይል ዓይነት"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, fuzzy, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "አኃዞች (ከክፍተት ጋር)"
-
-#: standalone/harddrake2:116
-#, fuzzy, c-format
-msgid "the type of the mouse"
-msgstr "Comment=የመክፈቻና የመፈለጊያው ምርጫዎች"
-
-#: standalone/harddrake2:117
-#, fuzzy, c-format
-msgid "the name of the mouse"
-msgstr "Name=ሲፒዩ"
-
-#: standalone/harddrake2:118
-#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "የዐምድ ብዛት"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr ""
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, fuzzy, c-format
-msgid "Identification"
-msgstr "ማስታወቂያ"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "ግንኙነት"
-
-#: standalone/harddrake2:137
-#, fuzzy, c-format
-msgid "Performances"
-msgstr "ምርጫዎች"
-
-#: standalone/harddrake2:138
-#, fuzzy, c-format
-msgid "Bugs"
-msgstr "ኦገስት"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, fuzzy, c-format
-msgid "Partitions"
-msgstr "የጽሑፍ ማስተካከያ"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr ""
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/ምርጫዎች (_O)"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/መረጃ (_H)"
-
-#: standalone/harddrake2:180
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "ሁሉም ማተሚያዎች"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr ""
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr ""
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/ውጣ (_Q)"
-
-#: standalone/harddrake2:204
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "መግለጫ የለም"
-
-#: standalone/harddrake2:206
-#, fuzzy, c-format
-msgid "Harddrake help"
-msgstr "የመረጃ &ማውጫ"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/የሶፍትዌርን ችግር ዘግብ (_R)"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/ስለ... (_A)"
-
-#: standalone/harddrake2:224
-#, fuzzy, c-format
-msgid "About Harddrake"
-msgstr "ስለ ፒኦኤዲት"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-
-#: standalone/harddrake2:240
-#, fuzzy, c-format
-msgid "Harddrake2"
-msgstr "የመረጃ &ማውጫ"
-
-#: standalone/harddrake2:254
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "የሀርድዌር ተመልካች"
-
-#: standalone/harddrake2:259
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "ፕሮግራሙን አስተካክል"
-
-#: standalone/harddrake2:266
-#, fuzzy, c-format
-msgid "Run config tool"
-msgstr "የመስሪያውን ፍንጭ አሳይ"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "ያልታወቀ"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "ያልታወቀ"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "የተለያየ"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr ""
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr ""
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr ""
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "ዲቪዲ"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, fuzzy, c-format
-msgid "Account:"
-msgstr "ስለ"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "ሚስጢራዊ ቃል"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "የእንግዳ ተቀባይ ስም፦"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr ""
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr ""
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: standalone/logdrake:50
-#, fuzzy, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "/መሣሪያዎች/የነበረው ቀለሞች"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr ""
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr ""
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/ፋይል (F)/አዲስ (_N)"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/ፋይል (F)/ክፈት (_O)"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/ፋይል (F)/አስቀምጥ (_S)"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/ፋይል (F)/በሌላ ስም አስቀምጥ... (_A)"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/ፋይል (F)/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/ምርጫዎች (O)/ፈተና"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/መረጃ (H)/ስለ... (_A)"
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr ""
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr ""
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr ""
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr ""
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "ፈለግ"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "ስየማዎች"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr ""
-
-#: standalone/logdrake:135
-#, fuzzy, c-format
-msgid "but not matching"
-msgstr "ማንበብ አልቻለም፦ "
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "ፋይል ይምረጡ"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "ቀን መቁጠሪያ"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "የፋይሉ ይዘት"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "የመልዕክት ማንቂያ"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr ""
-
-#: standalone/logdrake:222
-#, fuzzy, c-format
-msgid "please wait, parsing file: %s"
-msgstr "እባክዎ ያለ ሰነድን ይምረጡ"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
-
-#: standalone/logdrake:378
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "ህገ ወጥ የዶሴ ስም"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "የFTP ተጠሪ"
-
-#: standalone/logdrake:380
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "የመልዕክት ተጠሪ ሚስጢራዊ ቃል ያስፈልጋል"
-
-#: standalone/logdrake:381
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "የሳምባ ተጠሪ"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr ""
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr ""
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:403
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "ፈጣን ደብዳቤ"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "ምን ማድረግ ይፈልጋሉ?"
-
-#: standalone/logdrake:414
-#, fuzzy, c-format
-msgid "Services settings"
-msgstr "የአሁኑን ምርጫዎች"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-
-#: standalone/logdrake:422
-#, fuzzy, c-format
-msgid "Load setting"
-msgstr "ምርጫዎች ጫን (_L)"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr ""
-
-#: standalone/logdrake:429
-#, fuzzy, c-format
-msgid "Alert configuration"
-msgstr "የማስተካከያው አራሚ"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr ""
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr ""
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr ""
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "እንደ...ያስቀምጡ"
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr ""
-
-#: standalone/mousedrake:44
-#, fuzzy, c-format
-msgid "Emulate third button?"
-msgstr "'መረጃ' የሚለውን ቁልፍ አሳይ"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "የጠቋሚ ሙከራ"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr ""
-
-#: standalone/net_applet:45
-#, fuzzy, c-format
-msgid "Network is up on interface %s"
-msgstr "የተጠቃሚው እይታ"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr ""
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr ""
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "ግንኙነት አቋርጥ"
-
-#: standalone/net_applet:70
-#, fuzzy, c-format
-msgid "Monitor Network"
-msgstr "የቀይ ባርኔታ መረብ"
-
-#: standalone/net_applet:71
-#, fuzzy, c-format
-msgid "Configure Network"
-msgstr "መልዕክቶችን አሁን አምጣ"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "ንድፋዊ እይታ"
-
-#: standalone/net_applet:82
-#, fuzzy, c-format
-msgid "Profiles"
-msgstr "ወኪሎች"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr ""
-
-#: standalone/net_applet:223
-#, fuzzy, c-format
-msgid "Interactive intrusion detection"
-msgstr "ማተሚያውን አልተገኘም።"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr ""
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr ""
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, fuzzy, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "ተስተካክሎ የተቀመጠውን ባዕድ መነሻ ጥቀስ"
-
-#: standalone/net_applet:301
-#, fuzzy, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "ይህንን ሁኔታ መጠቀም ይፈልጋሉ?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, fuzzy, c-format
-msgid "Attack details"
-msgstr "ያለ ዝርዝሮች"
-
-#: standalone/net_applet:322
-#, fuzzy, c-format
-msgid "Attack time: %s"
-msgstr "%s አስጀምርs"
-
-#: standalone/net_applet:323
-#, fuzzy, c-format
-msgid "Network interface: %s"
-msgstr "የተጠቃሚው እይታ"
-
-#: standalone/net_applet:324
-#, fuzzy, c-format
-msgid "Attack type: %s"
-msgstr "ዓይነት፦"
-
-#: standalone/net_applet:325
-#, fuzzy, c-format
-msgid "Protocol: %s"
-msgstr "&ፖርት፦"
-
-#: standalone/net_applet:326
-#, fuzzy, c-format
-msgid "Attacker IP address: %s"
-msgstr "የIP አድራሻ፦"
-
-#: standalone/net_applet:327
-#, fuzzy, c-format
-msgid "Attacker hostname: %s"
-msgstr "ዞሮ መመለሻ ፋይል ስም: %s"
-
-#: standalone/net_applet:328
-#, fuzzy, c-format
-msgid "Service attacked: %s"
-msgstr "የአገልግሎቶች መቆጣጠሪያ"
-
-#: standalone/net_applet:329
-#, fuzzy, c-format
-msgid "Port attacked: %s"
-msgstr "&ፖርት፦"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Name=መረብ"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr ""
-
-#: standalone/net_monitor:108
-#, fuzzy, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr "ያልተላኩ መልዕክቶችን በመላክ ላይ"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-
-#: standalone/net_monitor:113
-#, fuzzy, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr "የቅርብ መረብ ማገናኛ"
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr ""
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, fuzzy, c-format
-msgid "Disconnecting from Internet "
-msgstr "የኢንተርኔት ሰዓትን ተጠቀም"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, fuzzy, c-format
-msgid "Connecting to Internet "
-msgstr "የኢንተርኔት ሰዓትን ተጠቀም"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr ""
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr ""
-
-#: standalone/net_monitor:235
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "የቅርብ መረብ ማገናኛ"
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "የቀለም ምርጫ"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "የተላከ፦"
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr ""
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr ""
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr ""
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr ""
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr ""
-
-#: standalone/printerdrake:116
-#, fuzzy, c-format
-msgid "%s Printer Management Tool"
-msgstr "የመስሪያውን ፍንጭ አሳይ"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_ተግባራት"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/ማተሚያ ጨምር (_A)"
-
-#: standalone/printerdrake:131
-#, fuzzy, c-format
-msgid "/Set as _Default"
-msgstr "ቀዳሚ ሆኖ ይሰየም"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/አስተካክል (_E)"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_ይጥፋ"
-
-#: standalone/printerdrake:134
-#, fuzzy, c-format
-msgid "/_Expert mode"
-msgstr "የመሸፈኛ ዘዴ"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_በድጋሚ ጀምር"
-
-#: standalone/printerdrake:146
-#, fuzzy, c-format
-msgid "/_Configure CUPS"
-msgstr "የCUPS ተጠሪ"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "ፈለግ፦"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "ማጣሪያ ተጠቀም"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, fuzzy, c-format
-msgid "Def."
-msgstr "የነበረው (_A)"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "የማተሚያ ስም"
-
-#: standalone/printerdrake:211
-#, fuzzy, c-format
-msgid "Connection Type"
-msgstr "የፋይሉ ዓይነት"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "የተጠሪ ስም"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "ማተሚያ ይጨመር"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr ""
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "ቀዳሚ ሆኖ ይሰየም"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr ""
-
-#: standalone/printerdrake:232
-#, fuzzy, c-format
-msgid "Edit selected printer"
-msgstr "ምንም ዓይነት ማተሚያ አልተመረጠም"
-
-#: standalone/printerdrake:235
-#, fuzzy, c-format
-msgid "Delete selected printer"
-msgstr "ምንም ዓይነት ማተሚያ አልተመረጠም"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "ዝርዝሩን በድጋሚ አስጀምር"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, fuzzy, c-format
-msgid "Configure CUPS"
-msgstr "የCUPS ተጠሪ"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr ""
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "ያስችላል"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "የተበላሸ"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "ደራሲዎች፦"
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, fuzzy, c-format
-msgid "Printer Management %s"
-msgstr "የመምሪያው ጉባኤ"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr ""
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr ""
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr ""
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: standalone/scannerdrake:131
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "የማተሚያውን ሞዴል ምረጡ"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "<b>ሞዴል</b>፦ %s<br>"
-
-#: standalone/scannerdrake:136
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "&ፖርት፦"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr ""
-
-#: standalone/scannerdrake:144
-#, fuzzy, c-format
-msgid "The %s is not supported under Linux."
-msgstr "አይደለም"
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr ""
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr ""
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, fuzzy, c-format
-msgid "Install firmware file from"
-msgstr "ከ &pot ሰነድ አሻሽል"
-
-#: standalone/scannerdrake:200
-#, fuzzy, c-format
-msgid "Select firmware file"
-msgstr "ጥሩው የፋይል ዓይነት"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, fuzzy, c-format
-msgid "Install firmware for the"
-msgstr "&መረጃውን አስስ"
-
-#: standalone/scannerdrake:258
-#, fuzzy, c-format
-msgid "Select firmware file for the %s"
-msgstr "ለአማራጩ የፋይል መመልከቻ አርእስት"
-
-#: standalone/scannerdrake:276
-#, fuzzy, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "ለመጻፍ ፋይል %sን መክፈት አልቻለም"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr ""
-
-#: standalone/scannerdrake:299
-#, fuzzy, c-format
-msgid "The %s is unsupported"
-msgstr "አይደለም"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr ""
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "የመረብ ዕቃ"
-
-#: standalone/scannerdrake:347
-#, fuzzy, c-format
-msgid "Searching for scanners..."
-msgstr "&መረጃውን አስስ"
-
-#: standalone/scannerdrake:383
-#, fuzzy, c-format
-msgid "Setting up kernel modules..."
-msgstr "የፋይል ስም አቅድ"
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, fuzzy, c-format
-msgid "Attention!"
-msgstr "አርጀንቲና"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:452
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "ስለ...መረጃ አስስ"
-
-#: standalone/scannerdrake:458
-#, fuzzy, c-format
-msgid "Add a scanner manually"
-msgstr "አምድ በኋላ ጨምር"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr ""
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr ""
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr ""
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "ይህ አስሊ"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr ""
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "ተጠሪን ጨምር"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "የተመረጠው ተጠሪ ይታረም"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "የተመረጠው ተጠሪ ይወገድ"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr ""
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr ""
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr ""
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr ""
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr ""
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr ""
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "ቋንቋ"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr ""
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "መጠቆሚያ ሰይም"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr ""
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr ""
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr ""
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr ""
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr ""
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr ""
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "ሲስተም ትከል"
-
-#: steps.pm:25
-#, fuzzy, c-format
-msgid "Administrator password"
-msgstr "የroot ሚስጢራዊ ቃል ይምረጡ"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "ተጠቃሚን ጨምር"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr ""
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr ""
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Xን ሰይም"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "አገልግሎቶችን ሰይም"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr ""
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr ""
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "ይህ ትክክል ነው?"
-
-#: ugtk2.pm:968
-#, fuzzy, c-format
-msgid "No file chosen"
-msgstr "የፋይል ምልክት"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr ""
-
-#: ugtk2.pm:972
-#, fuzzy, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "የቤት ዶሴ አልተገኘም።"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such directory"
-msgstr "ዶሴ አይደለም"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such file"
-msgstr "ፋይሉ `%s'ን የለም\n"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr ""
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr ""
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr ""
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-
-#: wizards.pm:99 wizards2.pm:99
-#, fuzzy, c-format
-msgid "Installation failed"
-msgstr "%s አልተገኘም"
-
-#, fuzzy
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "የአምዶቹን ቍጥር ለውጥ"
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "የMandriva Linux ተከላ %s"
-
-#, fuzzy
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "%s አልተገኘም"
-
-#, fuzzy
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "በተለወጠበት ቀን"
-
-#, fuzzy
-#~ msgid "Use graphical boot"
-#~ msgstr "ከቀኝ ወደ ግራ ተራ ተጠቀም"
-
-#, fuzzy
-#~ msgid "first step creation"
-#~ msgstr "የመጀመሪያ መስመር አንቀጽ [%s]"
-
-#~ msgid "choose image file"
-#~ msgstr "የምስል ፋይል ይምረጡ"
-
-#~ msgid "Browse"
-#~ msgstr "ቃኝ"
-
-#, fuzzy
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "ክፍለ ጊዜዎትን ያስተካክሉ"
-
-#, fuzzy
-#~ msgid "the color of the progress bar"
-#~ msgstr "&ስታቱስ ባር አሳይ"
-
-#~ msgid "Preview"
-#~ msgstr "ቀድሞ ማያ"
-
-#~ msgid "Choose color"
-#~ msgstr "ቀለም ይመረጥ"
-
-#~ msgid "Notice"
-#~ msgstr "ማስታወሻ"
-
-#, fuzzy
-#~ msgid "Generating preview..."
-#~ msgstr "የአኃዝ ቅድመ እይታ"
-
-#, fuzzy
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "የአኃዝ ቅድመ እይታ"
-
-#, fuzzy
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "ዩጎዝላቪያን (ላቲንኛ)"
-
-#~ msgid "No network card"
-#~ msgstr "የመረብ ካርድ የለም"
-
-#, fuzzy
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "(%s በፊት ተጨምሯል)"
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "በፍሎፒ ላይ ጫን/አስቀምጥ"
-
-#~ msgid "Load from floppy"
-#~ msgstr "ከፍሎፒ ጫን"
-
-#~ msgid "Save on floppy"
-#~ msgstr "ፍሎፒ ላይ አስቀምጥ"
-
-#~ msgid "Package selection"
-#~ msgstr "የጥቅል ምርጫ"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "ከፍሎፒ በመጫን ላይ ነው"
-
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Bengali"
-#~ msgstr "ቤንጋሊ"
-
-#~ msgid "Summary: "
-#~ msgstr "ማጠቃለያ፦"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
deleted file mode 100644
index a8eb9e356..000000000
--- a/perl-install/share/po/ar.po
+++ /dev/null
@@ -1,26590 +0,0 @@
-# translation of DrakX.po to Arabic
-# Amr Fathy <amr10@menanet.net>, 2001.
-# Mohammed Gamal <f2c2001@yahoo.com>, 2002.
-# Youcef Rabah Rahal <rahal@arabeyes.org>, 2004.
-# Ossama M. Khayat <okhayat@yahoo.com>, 2004, 2005.
-# Munzir Taha <munzir@kacst.edu.sa>, 2004.
-# Abdulaziz Al-Arfaj <alarfaj@arabeyes.org>, 2005.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-03-03 01:06+0300\n"
-"Last-Translator: Ossama M. Khayat <okhayat@yahoo.com>\n"
-"Language-Team: Arabic <support@arabeyes.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.9.1\n"
-"Plural-Forms: nplurals=4; plural=n==1 ? 0 : n==2 ? 1 : n>=3 && n<=10 ? 2 : "
-"3\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "ما هو مفتاح USB الذي تريد تنسيقه؟"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-"أنت بصدد تنسيق جهاز USB \"%s\". ستحذف هذه العملية كلّ البيانات المتواجدة "
-"عليه.\n"
-"تأكّد من أنّ الجهاز المختار هو مفتاح الـUSB الّذي تريد شوكلته.\n"
-"ننصحك بفصل كلّ أجهزة USB للخزن الأخرى عند تأدية هذه العملية."
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "المفتاح غير قابل للكتابة"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-"يبدو أن مفتاح USB محميّ من الكتابة عليه. رجاءً\n"
-"قم بفَصْله، أزل حماية الكتابة، وأعد وَصْله مجدّداً."
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "حاول مجدّدا"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "الاستمرار بدون مفتاح USB"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-"يبدو أن مفتاح USB محميّ من الكتابة عليه، إلّا أنّنا لانستطيع فكّ توصيله الآن.\n"
-"\n"
-"\n"
-"اضغط الزّر لإعادة تشغيل الجهاز، فُكّ توصيله، أزل حماية الكتابة،\n"
-"صِلْ المفتاح مرّة أخرى، وشغّل Mandriva Move مرّة أخرى."
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "إعادة التشغيل"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"مفتاح USB لا يحتوي على أي تجزيئات ويندوز (FAT).\n"
-"يجب أن يكون هناك واحد للاستمرار (بالإضافة لذلك، فهو قياسيّ أكثر حتى تكون\n"
-"قادراً على نقل والوصول إلى الملفّات من الأجهزة\n"
-"التي تعمل على ويندوز). رجاء ضَعْ مفتاح USB يحتوى على\n"
-" تجزيء ويندوز بدلاً من ذلك.\n"
-"\n"
-"\n"
-"يمكنك أيضاً التقدّم دون مفتاح USB - سوف لا تزال تكون\n"
-"قادراً على استخدام Mandriva Move كنظام تشغيل ماندريبا حيّ."
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"لم نتمكّن من العثور على أي مفتاح USB على نظامك. إن قمت\n"
-"بوصْل مفتاح USB الآن، سوف يقدر Mandriva Move\n"
-"أن يحفظ البيانات بدليلك المنزل بشفافية\n"
-"وإعدادات النّظام العامّة، وذلك عند الإقلاع التّالي على هذا الجهاز\n"
-"أو إقلاع آخر. ملاحظة: إن قمت بتوصيل مفتاح الآن، انتظر عدّة\n"
-"ثوانٍ قبل إعادة الاستكشاف.\n"
-"\n"
-"\n"
-"يمكنك أيضاً التّقدّم بلا مفتاح USB - سوف تكون لا تزال\n"
-"قادراً على استخدام Mandriva Move كنظام تشغيل\n"
-"ماندريبا حيّ."
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "تحتاج مفتاحا لحفظ بياناتك"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "إكتشاف مفتاح USB مرّة أخرى"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "إعداد مفتاح USB"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "الرجاء الانتظار، جاري إعداد ملفّات تهيئة النّظام على مفتاح USB..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr "أدخل معلومات المستخدم الخاصّة بك، سوف تستعمل كلمة المرور لحافظ الشّاشة"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "تهيئة آلية"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "الرجاء الانتظار، جاري اكتشاف وتهيئة الأجهزة..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "خطأ"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"ظهر خطأ و لا أعرف كيف أتعامل معه بأسلوب جيد.\n"
-"تابع على مسؤوليتك."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "حدث خطأ"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-"حدث خطأ:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"قد يحدث هذا بسبب ملفّات تهيئة النّظام الفاسدة\n"
-"على مفتاح USB، في هذه الحالة فإن إزالتها ومن ثمّ\n"
-"إعادة تشغيل Mandriva Move قد يُصلح هذه المشكلة. كي تقوم\n"
-"بذلك، اضغط على الزرّ المعنيّ.\n"
-"\n"
-"\n"
-"قد ترغب أيضاً بإعادة التّشغيل وإزالة مفتاح USB، أو\n"
-"تفحّص محتوياته ضمن نظام تشغيل آخر، أو حتى أن تلقي\n"
-"نظرة على ملفّات السجلّ في الشّاشة الطرفيّة #3 و#4 كي تحاول أن\n"
-"تخمّن ما يحدث."
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "إزالة ملفّات تهيئة النّظام"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "إعادة التّشغيل فقط"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "يمكنك فقط التشغيل بدون دعم الأقراص المدمجة"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "قتل تلك البرامج"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "ليس هناك دعم لقارئ الأقراص المدمجة"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "اقرأ جيدا!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"لا يمكن استعمال قرص مدمج آخر أثناء عمل البرامج التّالية:\n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "يجري النّسخ إلى الذّاكرة للسّماح بنزع القرص المدمج"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 ك.ب."
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 ك.ب."
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 م.ب."
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 م.ب."
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 م.ب."
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 م.ب."
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 م.ب."
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 م.ب."
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 م.ب. أو أكثر"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "خادم X"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "اختيار خادم X"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "تهيئة متعدد الرؤوس"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"نظامك يدعم التهيئة متعدد الرؤوس.\n"
-"ماذا تريد أن تفعل؟"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "لا أستطع تثبيت حزمة Xorg: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "اختيار حجم ذاكرة بطاقة الشاشة"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "تهيئة Xorg"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "أي تهيئة Xorg تريد؟"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "تهيئة كل الرؤوس بشكل مستقل"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "استخدام امتداد Xinerama"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "تهيئة البطاقة \"%s\"%s فقط"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s مع تعزيز عتادي ثلاثي الأبعاد"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "يمكن لبطاقتك الحصول على دعم تعزيز ثلاثي الأبعاد مع Xorg %s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s مع تعزيز تجريبي للرسوم ثلاثية الأبعاد"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"يمكن لبطاقتك التمتع بدعم لتعزيز الرسوم ثلاثية الأبعاد مع Xorg %s، \n"
-"لاحظ أن هذا الدعم تجريبي و قد يتسبب في ايقاف جهازك."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "مخصّص"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "خروج"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "بطاقة الشاشة"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "الشاشة"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "الاستبانة"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "اختبار"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "خيارات"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr "ملف تهيئة Xorg معطوب. سنتجاهله."
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"هل تريد حفظ التغييرات؟\n"
-"التهيئة الحالية هي:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "اختيار شاشة للرّأس رقم %d"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "اختيار شاشة"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "توصيل وتشغيل"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "شامل"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "المصنع"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "تعذر التأكد من وجود Plug 'n Play. الرجاء اختيار الشاشة الصحيحة"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"المعاملان المهمان جدا هما نسبة الإنعاش الأفقي، وهي النسبة التي\n"
-"يتم فيها انعاش الشاشة كاملة، و الأهم هو نسبة التزامن الأفقي\n"
-"و التي في خلالها يتم عرض خطوط المسح.\n"
-"\n"
-"من *المهم جدا* أن لا تحدد نوع شاشة مع متوسط تزامن\n"
-"أكبر من مقدرة شاشتك لأنك بهذا قد تدمر شاشتك.\n"
-" إذا لم تكن متأكدا يمكنك اختيار إعدادات عادية."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "نسبة الإنعاش الأفقي"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "نسبة الإنعاش الرأسي"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 لون (8 بت)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ألف لون (15 بت)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ألف لون (16 بت)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 مليون لون (24 بت)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "الاستبانات"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "أخرى"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "اختيار الاستبانة وعمق الألوان"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "بطاقة الشاشة: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "موافق"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "إلغاء"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "مساعدة"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "اختبار التهيئة"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "هل تريد تجربة التهيئة؟"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "تحذير: اختبار بطاقة العرض هذه قد يتسبب في إيقاف جهازك"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"ظهر خطأ:\n"
-"%s\n"
-"حاول تغيير بعض المُعطيات "
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "ستتم المغادرة في %d ثوان"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "هل هذا هو الإعداد الصحيح؟"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "لوحة المفاتيح: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "نوع الماوس: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "جهاز الماوس: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "الشاشة: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "تزامن الشاشة الأفقي: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "إنعاش الشاشة الرأسي: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "بطاقة الشاشة: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "ذاكرة بطاقة الشاشة: %s كيلوبايت\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "عمق الألوان: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "الاستبانة: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "برنامج تشغيل Xorg: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "واجهة رسومية عند بدء التشغيل"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"يمكنني إعداد حاسبك ليبدأ الواجهة الرّسومية (Xorg) آليا بعد الإقلاع.\n"
-"هل تريد Xorg أن يبدأ بعد إعادة إقلاع جهازك ؟"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"يبدو أن بطاقة الرسوم الخاصة بك تحتوي على موصل للتلفاز.\n"
-"يمكن تهيئة البطاقة للعمل باستخدام الـ frame-buffer.\n"
-"\n"
-"لهذا الغرض يجب عليك توصيل بطاقة الرسوم بالتلفاز قبل بدء تشغيل الحاسب.\n"
-"ثم اختيار \"TVout\" من محمّل الإقلاع\n"
-"\n"
-"هل لديك هذه الميزة؟"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "أي نظام يستخدمه جهاز التلفاز لديك؟"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "الرجاء الانتظار"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "محمل الإقلاع قيد التثبيت"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-"يريد LILO تعيين رقم هويّة كتلة للقرص %s.  على اي حال، فإن\n"
-"تغيير رقم هويّة الكتلة لقرص إقلاع ويندوز NT، 2000، أو XP هو خطأ جسيم.\n"
-"هذا التحذير لا ينطبق على أقراص بيانات ويندوز 95 أو 98 أو NT.\n"
-"\n"
-"أتريد تعيين رقم هويّة كتلة جديد؟"
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "فشل تثبيت محمّل الإقلاع. حدث الخطأ التالي:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"قد تحتاج إلى تغيير جهاز إقلاع Open Firmware كي تُمكّن مُحمّل الإقلاع.  إن لم يكن "
-"مُلقّن محمّل الإقلاع يظهر\n"
-"عند إعادة التشغيل، ابق ضاغطاً على Command-Option-O-F عند إعادة التتشغيل "
-"وأدخل:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" ثم اكتب: shut-down\n"
-"بعد إقلاع النظام التالي يجب أن ترى مُلقّن محمّل الإقلاع."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"لقد قررت تثبيت محمّل الإقلاع على تجزيء.\n"
-"هذا يعني أنه لديك محمّل إقلاع على القرص الذي تستخدمه للإقلاع (مثال: System "
-"Commander).\n"
-"\n"
-"على أي قرص تقوم بالإقلاع؟"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "القطاع الأول من القرص (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "القطاع الأول من التجزيء الجذري"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "على قرص مرن"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "تخطّي"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "تثبيت LILO/grub"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "أين تريد تثبيت محمّل الإقلاع؟"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "تهيئة أسلوب الإقلاع"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "خيارات محمّل الإقلاع الرئيسية"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "اكتب حجم الذاكرة بالميغابايت"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "خيار ``تشديد خيارات سطر الأوامر`` لا ينفع دون كلمة مرور"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "كلمات المرور غير متطابقة"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "الرجاء المحاولة مجدداً"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "محمّل الإقلاع المُستخدم"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "جهاز الإقلاع"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "توقيت ما قبل إقلاع الصورة الافتراضية"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "تمكين ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "إجبار عدم استخدام APIC"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "إجبار عدم استخدام Local APIC"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "كلمة المرور"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "كلمة المرور (مجدداً)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "تشديد خيارات سطر الأوامر"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "تشديد"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "تنظيف /tmp عند كل إقلاع"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "حجم الذاكرة الدقيق عند الحاجة (عثر على %d م.ب.)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "رسالة Init"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "تأخير Open Firmware"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "الوقت الأقصى لإقلاع النواة"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "تمكين الإقلاع من القرص المدمج؟"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "تمكين إقلاع OF؟"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "نظام التشغيل الافتراضي؟"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "صورة"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "الجذر"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "إلحاق"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "وضعية الفيديو"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "سجلّ إعداد الشبكة "
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "تسمية"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "افتراضي"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "لا فيديو"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "لا يُسمح بالتسميات الفارغة"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "يجب تحديد صورة النواة"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "يجب تحديد تجزيء جذر"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "هذه التسمية مستخدمة مسبقا"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "ما نوع المدخل المُراد إضافته؟"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "لينكس"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "نظام تشغيل آخر (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "نظام تشغيل آخر (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "نظام تشغيل آخر (ويندوز...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"هذه هي المدخلات المختلفة في قائمة الإقلاع حتى الآن.\n"
-"يمكنك إضافة مدخلات أخرى أو تغيير الموجودة."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "الوصول إلى برامج X"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "الوصول إلى أدوات rpm"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "السماح بـ\"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "الوصول إلى ملفات الإدارة"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "الوصول إلى أدوات الشبكة"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "الوصول إلى أدوات التجميع"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(تمت إضافة %s مسبقا)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "كلمة المرور هذه بسيطة جداً"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "الرجاء إعطاء اسم مستخدم"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "اسم المستخدم يجب أن يحتوي فقط على الحروف الصغيرة، والأرقام، و`-' و `_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "اسم المستخدم طويل جداً"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "اسم المستخدم مُضاف مسبقا"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "إضافة مستخدم"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"إدخال مستخدم\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "تم"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "قبول المستخدم"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "الاسم الحقيقي"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "اسم الدخول"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "الصدفة"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "أيقونة"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "تسجيل دخول آلي"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "يمكن إعداد جهازك لتسجيل الدخول آلياً لمستخدم معين."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "هل تريد استخدام هذه الميزة؟"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "نعم"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "لا"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "اختيار المستخدم الافتراضي:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "اختيار مدير النوافذ الذي سيتم تشغيله:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "الرجاء اختيار لغة لاستخدامها."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "خيار اللغة"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"يدعم ماندريبا لينكس العديد من اللّغات. اختر\n"
-"اللّغات التي تريد تثبيتها. ستكون هذه متوفرةً عند\n"
-"اكتمال التثبيت و إعادة تشغيل نظامك."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "استخدام يونيكود افتراضياً"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "كل اللغات"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "الدولة / الإقليم"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "الرجاء اختيار الدولة."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "هذه قائمة كاملة بكل الدول المتوفرة"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "دول أخرى"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "متقدم"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "طريقة الإدخال:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "لاشيء"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "لا مشاركة"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "السماح لكل المستخدمين"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"هل تريد السماح للمستخدمين بمشاركة بعض الأدلة الخاصة بهم؟\n"
-"السماح بذلك سيسمح للمستخدمين بأن يضغطوا زر المشاركة في Konqueror و "
-"nautilus.\n"
-"\n"
-"\"مخصص\" يسمح لك بعمل إعدادات خاص لكل مستخدم.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr "NFS: نظام تقسيم ملفّات يونكس التّقليدي، بدعم أقلّ على ماك و ويندوز."
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-"SMB: نظام تقسيم ملفّات مستعمل من قبل ويندوز، ماك OS X و العديد من أنظمة لينكس "
-"الحديثة."
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr "يمكنك التّصدير باستعمال NFS أو SMB. الرجاء اختيار أيّهما تريد استعماله."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "تشغيل userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "إغلاق"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"المشاركة لكل مستخدم تستخدم المجموعة \"fileshare\".\n"
-"يمكنك أن تستخدم userdrake لإضافة مستخدم في هذه المجموعة."
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "ملفّ محلي"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr "بطاقة ذكيّة"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "نطاق ويندوز"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr "Active Directory مع SFU"
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr "Active Directory مع Winbind"
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "ملفّ محلّي:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-"استخدام local لكل المواثقة والمعلومات  التي يخبرها المستخدم في ملف local"
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-"يطلب من حاسبك استعمال LDAP للبعض من أو لجميع المواثقة. يقوم LDAP بتوحيد "
-"البعض من أنواع المعلومات داخل منظّمتك."
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-"يسمح لك بتشغيل مجموعة من الحاسبات في نفس خدمة معلومات الشّبكة (NIS) بكلمة "
-"مرور و ملفّ مجموعة مشتركين."
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "نطاق ويندوز:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-"يسمح Winbind للنّظام بجلب المعلومات و مواثقة المستخدمين في نطاق لويندوز."
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr "Active Directory مع SFU:"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr "نظام Kerberos هو نظام آمن لتوفير خدمات مواثقة الشّبكة."
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Active Directory مع Winbind:"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "تحقق LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "خادم LDAP"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "بسيط"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr "النّسق الأمني (SASL/Kerberos("
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr "مواثقة Active Directory"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "النطاق"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "خادم"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "قاعدة بيانات مستخدمي LDAP"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr "استخدام Anonymous BIND"
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr "مسموح لمستخدم LDAP بتصفّح Active Directory"
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr "كلمة مرور المستخدم"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "التشفير"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "مواثقة NIS"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "نطاق NIS"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "خادم NIS"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"كي يعمل هذا من أجل متحكّم نطاق أوّليّ PDC لويندوز 2000، سوف يكون على المدير على "
-"الأرجح  أن ينفّذ: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
-"everyone /add وأن يعيد تشغيل الخادم.\n"
-"سوف تحتاج أيضاً إلى اسم المستخدم/كلمة السّر لمدير النطاق لتضُمّ الجهاز إلى نطاق "
-"ويندوز.\n"
-"إن لم يكن التّشبيك مُمكّناً بعد، سيحاول DrakX أن ينضمّ إلى النطاق بعد خطوة إعداد "
-"الشّبكة.\n"
-"إن فشلت هذه الخطوة لسبب ما ولم يعمل مواثقة النطاق، نفّذ 'smbpasswd -j DOMAIN -"
-"U USER%%PASSWORD' باستخدام نطاق ويندوز، واسم مستخدم/كلمة سرّ المدير، بعد "
-"إقلاع النّظام.\n"
-"سيختبر الأمر 'wbinfo -t' ما إذا كانت أسرار مواثقتك جيّدة."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "نطاق مواثقة ويندوز"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "اسم المستخدم لمدير النطاق"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "كلمة المرور لمدير النطاق"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr "استخدام Idmap لخزن UID/SID "
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr "Idmap الافتراضي "
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr "ضع كلمة مرور المستخدم الجذر (root) وطرق المواثقة الشّبكية"
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr "ضع كلمة مرور المستخدم الجذر"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "طريقة المواثقة"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "بدون كلمة مرور"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "كلمة المرو هذه قصيرة جداً (يجب أن تكون %d رموز على الأقل)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "المواثقة"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "لم يمكن استخدام البثّ دون اسم نظام NIS"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"أهلاً بك في محدّد نظام التّشغيل!\n"
-"\n"
-"اختر نظام تشغيل من اللائحة أعلاه أو\n"
-"انتظر الإقلاع الافتراضي.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO مع قائمة رسومية"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO مع قائمة نصية"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "لا توجد مساحة كافية في /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "يمكنك تثبيت محمّل الإقلاع على التجزيء %s\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr "تهيئة محمّل الإقلاع يجب أن يحدّث لأنّ التجزيء تمّ إعادة ترقيمه"
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"لا يمكن تثبيت محمّل الإقلاع بشكل صحيح. يجب أن تقوم بإقلاع الإنقاذ وتختار \"%s"
-"\""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "إعادة تثبيت مُحمِّل الإقلاع"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "ك.ب."
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "م.ب."
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "غ.ب."
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "ت.ب."
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d دقائق"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "دقيقة واحدة"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d ثوان"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu مفقود"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper مفقود"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "النمسا"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "أوستراليا"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "بلجيكا"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "البرازيل"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "كندا"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "السويسرية"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "كوستاريكا"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "جمهورية التشيك"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "ألمانيا"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "الدنمارك"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "استونيا"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "أسبانيا"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "فنلندا"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "فرنسا"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "اليونان"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "المجر"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "أيرلندا"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "اسرائيل"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "إيطاليا"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "اليابان"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "هولندا"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "النرويج"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "نيوزيلندا"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "بولندا"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "البرتغال"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "روسيا"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "السويد"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "سلوفاكيا"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "تايلاند"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "تايوان"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "جنوب أفريقيا "
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "الولايات المتحدة"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV هو برتوكول يسمج لك بتحميل دليل في خادم الوب بشكل\n"
-"محلي، و معاملته كنظام ملفات محلي (يجب أن يكون خادم الوب معدّ\n"
-"كخادم WebDAV). إذا كنت تريد إضافة نقاط تحميل\n"
-"WebDAV، اختر \"جديد\"."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "جديد"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "فكّ"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "تركيب"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "مكان التركيب"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "الرجاء إدخال عنوان خادم WebDav"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "العنوان يجب أن يبدأ بـ http:// أو https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "الخادم: "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "مكان التركيب:"
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "الخيارات: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "رجاء نسخ بياناتك احتياطيّاً أولاً"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"إن كنت تريد استخدام aboot، فلا تنْسَ أن تترك مساحة فارغة (يكفي 2048 قِطاع)\n"
-"في بداية القُرص"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "المرشد"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "اختيار عمل"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"لديك تجزيء ميكروسوفت ويندوز واحد كبير.\n"
-"أقترح أن تغيّر حجم هذا التجزيء\n"
-"(اضغط عليه ثم اختر \"تغيير الحجم\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "الرجاء الضغط على تجزيء"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "تفاصيل"
-
-#
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "تعذّر العثور على أقراص صلبة"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "ويندوز"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "فارغ"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "أنواع أنظمة الملفات:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "استخدام ``%s'' بدلا من ذلك"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "إنشاء"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "النوع"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "حذف"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "استخدام ``الفكّ'' أولا"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "اختيار تجزيء آخر"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "اختيار تجزيء"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "خروج"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "تراجع"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "الانتقال إلى الوضع العادي"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "الانتقال إلى وضعية الخبير"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "استمرار على أي حال؟"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-"يفضّل أن تنسّق التّجزيء %s.\n"
-"إن لم تفعل فلن يسجّل أي مُدخل لنقطة التّركيب %s في fstab.\n"
-"هل تريد الخروج على أي حال؟"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "الخروج بدون حفظ"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "هل تريد الخروج بدون كتابة جدول التجزئة؟"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "هل تريد حفظ تعديلات /etc/fstab"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "تحتاج إلى إعادة التثبيت لتفعيل التعديلات على جدول التجزئة"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "مسح الكل"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "تحديد آلي"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "المزيد"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "معلومات القرص الصلب"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "كل التجزيئات الرئيسية مستخدمة"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "لا يمكن إضافة أي تجزيئات أخرى"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "للحصول على تجزيئات أكثر، يرجى إلغاء تجزيء كي تتمكن من عمل تجزيء ممتد"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "حفظ جدول التجزئة"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "استعادة جدول التجزئة"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "إنقاذ جدول التجزئة"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "إعادة تحميل جدول التجزئة"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "التركيب الآلي للوسائط القابلة للإزالة"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "اختيار ملف"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"جدول التجزئة المحفوظ ليس بنفس الحجم\n"
-"لا زلت تريد الاستمرار؟"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "جاري محاولة إنقاذ جدول التجزئة"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "معلومات مفصّلة"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "تغيير الحجم"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "تنسيق"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "إضافة إلى RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "إضافة إلى LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "ازالة من RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "ازالة من LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "تعديل RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "استخدام لـloopback"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "إنشاء تجزيء جديد"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "قطاع البداية: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "الحجم بالميغابايت: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "نوع نظام المفات: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "التفضيل: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "اسم الكتلة المنطقيّة"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"لا يمكنك إنشاء تحزيء جديد\n"
-"(لأنك وصلت إلى العدد الأقصى من التجزيئات الأساسية).\n"
-"أولاً احذف تجزيء أساسياً و قم بإنشاء تجزيء ممتد."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "هل تريد إزالة ملف loopback؟"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "بعد تغيير نوع التجزيء %s، فإنك ستسخر كل البيانات على هذا التجزيء"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "تغيير نوع التجزيء"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "أي نظام ملفات تريد؟"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "جاري التغيير من ext2 إلى ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "أين تريد تركيب ملف loopback %s؟"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "أين تريد تركيب الجهاز %s؟"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"تعذّر فكّ مكان التركيب نظرا لأن هذه التجزيء مستخدم لـloop back.\n"
-"قم بإزالة الـloopback أولا"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "أين تريد تركيب الجهاز %s؟"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "تغيير الحجم"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "حساب روابط نظام ملفات FAT"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "هذا التجزيء غير قابل لتغيير الحجم"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "كل البيانات على هذ التجزيء يجب حفظها احتياطيا"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "بعد تغيير حجم التجزيء %s، فإن كل البيانات على هذه التجزيء ستفقد"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "اختيار الحجم الجديد"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "الحجم الجديد بالميغابايت: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"للتأكد من صحة البيانات بعد إعادة تحجيم التجزيئات، \n"
-"سيتم الدقيق على نظام الملفات عند التشغيل القادم لويندوز(TM)"
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "اختيار RAID موجود للإضافة إليه"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "جديد"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "اختيار LVM، موجود للإضافة إليه"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "اسم LVM؟"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "هذه التجزيء لا يمكن استخدامه لـloopback"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "اسم ملف Loopback: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "إعطاء اسم ملف"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "هذا الملف مستخدم من loopback أخرى، اختر ملفا آخر"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "الملف موجود مسبقا، هل تريد استخدامه؟"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "خيارات التركيب"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "متنوعة"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "جهاز"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "المستوى"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "حجم القطعة الكبيرة بالكيلوبايت (KiB)"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "كن حذرا: هذه العملية خطيرة"
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "أي نوع من التجزئة؟"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ستحتاج إلى إعادة التشغيل قبل أن يتم تفعيل التعديلات"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "جدول التجزئة للقرص %s سيتم كتابته إلى القرص!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "بعد تنسيق التجزيء %s، فإن كل البيانات الموجودة على هذا التجزيء ستفقد"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "نقل الملفات إلى تجزيء جديد"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "تخبئة الملفات"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"الدليل %s يحتوي مسبقا على بعض البيانات\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "جاري نقل الملفات إلى التجزيء الجديد"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "جاري نسخ %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "جاري ازالة %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "التجزبء %s معروف الآن بالإسم %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr "تجزيئات تم إعادة ترقيمها:"
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "الجهاز: "
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "اسم Devfs: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr "علامة المجلّد: "
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "حرف سواقة دوس: %s (مجرد تخمين)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "النوع: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "الاسم: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "البداية: قطاع %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "الحجم: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr "، %s قطاع"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "الاسطوانة %d إلى %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "مُنسّق\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "غير مُنسّق\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "محمل\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"ملفـ(ات) Loopback\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"التجزيء الذي يتم إقلاعه افتراضيا\n"
-"    (لـ MS-DOS و ليس لـ lilo)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "المستوى %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "حجم القطعة الكبيرة %d كيلوبايت (KiB)\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "أقراص RAID %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "اسم ملف Loopback: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"على الأرجح، هذا التجزيء هو\n"
-"تجزيء Driver. عليك\n"
-"تركه لوحده.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"تجزيء الإقلاع\n"
-"هذا هو\n"
-"للإقلاع المزدوج في نظامك.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "للقراءة فقط"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "الحجم: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "الهندسة: %s اسطوانة، %s رأس، %s قطاع\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "معلومات: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "أقراص LVM %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "نوع جدول التجزئة: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "على القناة %d id %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "مفتاح تشفير نظام الملفات"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "اختيار مفتاح تشفير نظام الملفات"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "مفتاح التشفير هذا بسيط جدا (يجب أن يكون %d حرفا على الأقل)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "مفاتيح التشفير غير متطابقة"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "مفتاح التشفير"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "مفتاح التشفير (مرة أخرى)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "خوارزمية التّشفير"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "تغيير النوع"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "تعذر الدخول باستخدام اسم المستخدم %s (كلمة مرور سيئة؟)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "مواثقة النطاق مطلوبة"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "أي اسم مستخدم"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "آخَر"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"الرجاء إدخال اسم المستخدم، كلمة المرور و النطاق الخاص بك للدخول إلى هذا "
-"المضيف."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "اسم المستخدم"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "بحث في أجهزة الخادم"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "البحث عن خادمات جديدة"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "الحزمة %s يجب أن تُثبت. هل تريد تثبيتها؟"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "الحزمة الضرورية %s مفقودة"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "جاري تركيب الحزم..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "حذف الحزم..."
-
-# y, c-format
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "تركيب التجزيء %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "فشل تركيب التجزيء %s في الدليل %s"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "جاري التأكد من %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "خطأ في فكّ %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "جاري تمكين تجزيء التبديل %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "جاري تنسيق التجزيء %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "جاري إنشاء وتنسيق الملف %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "لا أعرف كيف أنسّق %s في النوع %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s تنسيق %s قد فشل"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"عدم تحديث أوقات الوصول إلى inode على نظام الملفّات هذا\n"
-"(مثلا، من أجل وصول أسرع إلى مخزن الأخبار لتسرّع خادمات الأخبار)."
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"يمكن تجهيزه فقط بشكل بيّن (أي،\n"
-"أن الخيار -a سوف لن يجعل نظام الملفّات يُجهّز)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr "عدم ترجمة الأجهزة الحرفيّة أو الكتليّة الخاصّة على نظام الملفّات."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"عدم السماح بتنفيذ أي برامج مُجمّعة على نظام الملفّات المُجهّز.\n"
-"قد يكون هذا الخيار مفيداً لخادم عليه أنظمة ملفّات\n"
-"تحتوي على برامج مُجمّعة لبُنيات غير بُنيتها."
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"عدم السماح لبتّات تحديد مُعرّف المستخدم أو تحديد مُعرّف المجموعة\n"
-"أن تُفعّل. (يبدو هذا آمناً، إلا أنه في الحقيقة غير آمن إن كان\n"
-"suidperl(1) مثبتاً لديك.("
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "تجهيز نظام الملفّات بوضع القراءة فقط."
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "كل الدّخل/الخرج إلى نظام الملفّات يجب أن يحدث تزامنيّاً."
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"السماح للمستخدم العادي تجهيز نظام الملفّات.\n"
-"اسم المستخدم المجهّز يكتب في mtab حتى يستطيع إزالة تجهيز نظام\n"
-"الملفات مجدّداً. هذا الخيار تدلّ عليه الخيارات noexec، nosuid، وnodev\n"
-"(إلا إذا تخطّته خيارات إضافيّة، كسطر الخيار\n"
-"user، exec، dev، suid(. "
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "إعطاء إمكانية الكتابة لعامة المستخدمين"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "أعط صلاحية الكتابة لعامة المستخدمين"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "لا يمكنك استخدام JFS للتجزئات أصغر من 16 ميغابايت"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "لا يمكنك استخدام ReiserFS للتجزئات أصغر من 32 ميغابايت"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "مع /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "خادم"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"لا يمكنني قراءة جدول التجزئة للجهاز %s، يبدو أنه فاسد: (\n"
-"يمكنني أن أحاول المتابعة بإزالة التجزيئات السيئة (ستضيع كل البيانات!).\n"
-"الحل الآخر هو أن تمنع DrakX من تعديل جدول التجزئة.\n"
-"(الخطأ هو %s)\n"
-"\n"
-"هل أنت موافق على خسارة كل التجزيئات؟\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "يجب أن تبدأ أماكن التركيب بالعلامة /"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "أماكن التركيب يجب أن تحتوي فقط على الحروف و/أو الآرقام"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "هناك تجزيء مع مكان التركيب %s مسبقاً\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"لقد اخترت تجزئة RAID برمجية كتجزيء جذري (/).\n"
-"لا يستطيع أي محمّل إقلاع التعامل مع ذلك بدون تجزيء /boot.\n"
-"الرجاء التأكد من إضافة تجزيء /boot"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "لا يمكنك استخدام كتلة LVM المنطقيّة لمكان التركيب %s"
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"لقد اخترت تجزيء كتلة منطقيّة LVM كدليل جزر (/).\n"
-"لا يستطيع محمّل الإقلاع التعامل مع ذلك بدون تجزيء /boot.\n"
-"الرجاء التأكّد من أن تضيف تجزيء /boot"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr "قد لا تتمكّن من تثبيت lilo (حيث أن lilo لا يمكنه تولّي LV على عدّة PV)"
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "هذا الدليل يجب أن يكون في نظام الملفات الجذري"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"تحتاج إلى نظام ملفات حقيقي (ext2/ext3، resierfs، xfs، أو jfs) لمكان التركيب "
-"هذه\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "لا يمكنك استخدام نظام ملفات مرمّز لمكان التركيب %s"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "لا توجد مساحة كافية للتحديد الآلي"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "لا شيء لعمله"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "القرص المرن"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "القرص الصّلب"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "القرص المدمج"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "أجهزة نسخ CD/DVD"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "شريط"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "بطاقة الفيديو"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "بطاقة التلفاز"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "أجهزة وسائط متعددة أخرى"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "بطاقة الصوت"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "كاميرات الوب"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "المُعالجات"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "مكيّفات ISDN"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "بطاقة Ethernet"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "المودم"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "مكيّفات ADSL"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "الذاكرة"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "متحكمات AGP"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "طابعة"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "عصا الألعاب"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "متحكّمات SATA"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "متحكّمات RAID"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "متحكمات (E)IDE/ATA"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "متحكمات Firewire"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "متحكمات PCMCIA"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "متحكمات SCSI"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "متحكمات USB"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "منافذ USB"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "متحكّمات SMBus"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "الجسور ومتحكمات النظام"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "لوحة المفاتيح"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "الماوس"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "مُزوّد الطاقة الغير منقطعة (UPS)"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "الماسح الضوئي"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "غير معروف/أخرى"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "يرجى الإنتظار... جاري تطبيق التهيئة"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "لا مشغل بديل"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr "لا يوجد مشغل بديل (ALSA أو OSS) لبطاقة الصوت (%s) التي تستخدم \"%s\""
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "إعدادات الصوت"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr "يمكنك هنا اختيار مشغل بديل (ALSA أو OSS) لبطاقة الصوت (%s)."
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"بطاقتك تستخدم المُشغّل %s\"%s\" حالياً (المُشغّل الحالي لبطاقتك هو \"%s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"نظام الصّوت المفتوح (OSS) كان أو واجهة تطبيق للصّوت. إنه واجهة تطبيق للصّوت لا "
-"تعتمد نظام تشغيل معيّن (إنه متوفّر على معظم أنظم يونكس(tm)) إلّا أنّه واجهة "
-"تطبيق بسيطة ومحدودة.\n"
-"ماذا بعد، مُشغّلات OSS كلّها تعيد اختراع الإطار.\n"
-"\n"
-"بناء صوت لينكس المتقدّم (ALSA) هو بناء وحديّ والذي\n"
-"يدعم مجموعة كبيرة من بطاقات ISA، USB وPCI.\n"
-"\n"
-"كما أنه يوفّر واجهة تطبيق أعلى من OSS.\n"
-"\n"
-"لاستخدام alsa، يمكن إمّا استخدام:\n"
-"- التّوافق القديم مع واجهة تطبيق OSS\n"
-"- واجهة تطبيق ALSA الجديدة والتي توفّر العديد من الميزات المحسّنة إلّا أنّها "
-"تتطلّب مكتبة ALSA.\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "المُشغّل:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "حل المشاكل"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "تحذير"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"وضع مشغل \"%s\" القديم على القائمة السوداء.\n"
-"\n"
-"أُفيد أنّه يتسبّب في بعض الحالات بانهيار في النواة عند ازالة التركيب.\n"
-"\n"
-"مشغل \"%s\" الجديد سيتم استخدامه عند تشغيل الجهاز في المرة القادمة."
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "لا يوجد مشغل مفتوح المصدر"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"لا يوجد مشغل مفتوح المصدر لبطاقة الصوت (%s)، لكن هناك مشغل تجاري في \"%s\"."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "لا يوجد مشغل معروف"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "لا يوجد مشغل معروف لبطاقة الصوت (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "مشغل غير معروف"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "خطأ: مشغل \"%s\" لبطاقة الصوت الخاصة بك غير موجود في القائمة"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "حل مشاكل الصوت"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"الاختبار الكلاسيكي لعلّة الصوت هو تشغيل الأوامر التّالية:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" سيخبرك باسم مشغّل الذي تستخدمه بطاقتك "
-"الصّوتيّة بشكل افتراضي\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" سيخبرك باسم مشغّل\n"
-"المستخدم حاليّاً\n"
-"\n"
-"- \"/sbin/lsmod\" سيمكّنك من التحقّق من أن وحدته (مشغّل) هي\n"
-"مُحمّلة أم لا\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" و \"/sbin/chkconfig --list alsa\" سوف\n"
-"يخبرك إن كانت خدمات الصّوت وalsa مُهيّئة للعمل على\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" سيخبرك ما إذا كان الصّوت مكتوماً أم لا\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" سيخبرك عن أيّ برنامج يستخدم بطاقة الصّوت.\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "اسمح لي أن أختار مشغل"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "جاري اختيار مشغل عام"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"إذا كنت تعتقد فعلاً أنك تعرف ما هو المُشغّل الصحيح لبطاقتك\n"
-"يمكنك اختياره من القائمة أعلاه.\n"
-"\n"
-"المُشغّل الحالي لبطاقة الصوت \"%s\" الخاصة بك هو \"%s\" "
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "تحقق آلي"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "غير معروف|عام"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "غير معروف|CPH05X (bt878) [مصنعون كثيرون]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "غير معروف|CPH06X (bt878) [مصنعون كثيرون]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"لأغلب بطاقات التلفاز الحديثة، وحدة bttv لنواة لينكس يمكنها التحقق آلياً من "
-"المعاملات الصحيحة.\n"
-"إذا تم التعرف على البطاقة بشكل خاطئ، يمكنك إدخال التونر و نوع البطاقة الصحيح "
-"هنا. فقط اختر المعاملات المناسبة لبطاقة الشاشة."
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "نوع البطاقة"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "نوع الموالف:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "عدد مخازن اللّقطات:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "عدد مخازن اللّقطات للقطات mmap'ed"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "إعداد PLL:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "دعم الراديو:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "تمكين دعم الراديو"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"قبل المتابعة، عليك قراءة بنود الترخيص جيداً.. إنها\n"
-"تغطي كل توزيعة ماندريبا لينكس. إذا كنت توافق على كل البنود\n"
-"الموجودة فيها، قم بالتأشير على مربّع  \"%s\". إن لم يكن كذلك،  فبالضّغط على زرّ "
-"\"%s\"\n"
-"سيتم إعادة تشغيل جهازك."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "قبول"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"نظام جنو/لينكس هو نظام متعدد المستخدمين، مما يعني أن كل مستخدم\n"
-"له تفضيلاته الخاصة و ملفاته الخاصة و ما إلى ذلك. لكن على غرار المستخدم \"root"
-"\"، والذي هو مدير النظام، فإن المستخدمين الذين تُضيفهم حتى هذه النقطة لن "
-"يكونوا مُخوّلين\n"
-"بتغيير أي شيء عدا ملفّاتهم الخاصّة وإعداداتهم،\n"
-"لحماية النظام من أيّ تغييرات مشبوهة أو غير مقصودة والتي\n"
-"قد تكون ذات تأثير على النّظام بشكل كامل. سيتعيّن عليك إنشاء مستخدم واحد على "
-"الأقل لنفسك -- والذي هو حساب عليك استخدامه للعمل الروتيني اليومي.\n"
-"مع أنّه من السهل تسجيل الدخول كـ\"root\" لعمل\n"
-"أي شيء وكل شيء، إلا أنّه قد يكون أيضاً خطراً جداً. الخطأ البسيط جداً\n"
-"قد يعني أنّ نظامك لن يعمل بعد ذلك. إن قمت بخطأ جسيم\n"
-"كمستخدم عادي، فإنّ أسوأ ما قد يحدث أنّك ستفقد\n"
-"بعض المعلومات، ولكن لن تُؤثّر على النظام ككلّ.\n"
-"\n"
-"\n"
-"الحقل الأول سيسألك عن اسمك الحقيقي. بالطبع هذا الحقل\n"
-"ليس اجبارياً -- يمكنك إدخال أي شئ تريد. DrakX سيستخدم الكلمة\n"
-"الأولى التي قمت بإدخالها في هذا الحقل وينقلها إلى حقل \"%s\"، الذي\n"
-"هو الاسم الذي سيدخله المستخدم  للدخول على النظام. إن أحببت، يمكنك تخطّي\n"
-"المُدخل الافتراضي وتغيّر اسم المستخدم. الخطوة التالية هي إدخال كلمة المرور.\n"
-"من وجهة نظر أمنية، فإن كلمة مرور المستخدم العادي بدون صلاحيات\n"
-"ليست بأهمّيّة كلمة مرور المستخدم \"الجذر\"، لكن ليس هذا سبب للتغاضي\n"
-"عنها أو جعلها فارغة أو جعلها سهلة جداً: على كلّ حال، ملفاتك قد تكون هي\n"
-"التي في خطر.\n"
-"\n"
-"بمجرد ضغطك على زر \"%s\"، يمكنك إضافة مستخدمين أخر. أضف اسم مستخدم\n"
-"لكل صديق من أصدقائك أو لأبيك أو لأختك،مثلاً. اضغط \"%s\" عندما\n"
-"تنتهي من إضافة المستخدمين.\n"
-"\n"
-"ضغط زرّ \"%s\" يسمح لك بتغيير \"الصَّدفة\"\n"
-"لذلك المستخدم (bash هو الافتراضي).\n"
-"\n"
-"عندما تنتهي من إضافة المستخدمين، سيتم سؤالك عما إذا كنت تريد اختيار مستخدم\n"
-"يتم الدخول بواسطته إلى النظام تلقائياً عند بدء التشغيل.\n"
-"إذا كنت مهتماً بهذه الميزة (و لم تكن مهتماً كثيراً بالأمن المحلّي)،\n"
-"اختر المستخدم المطلوب و مدير النوافذ ثم اضغط \"%s\".\n"
-"إن لم تكن مهتماً بهذه الميزة، قم بإزالة التأشير من مربّع الاختيار \"%s\"."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "اسم المستخدم"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "التالي"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"في الأعلى ستجد تجزيئات لينكس الموجودة والتي عثر عليها على القرص الصلب الخاص "
-"بك.\n"
-"يمكنك أن تُبقي اختيارات المرشد، وهي جيدة لأغلب أنواع التثبيت.\n"
-"إذا قمت بعمل أي تغييرات فيجب عليك أن تعرف التجزيء الجذر (\"/\"). لا تختر\n"
-"تجزيئات صغيرة جدا و إلا لن تستطيع تثبيت برامج كافية. إذا كنت تريد تخزين "
-"البيانات\n"
-"على تجزيء مستقل فستحتاج إلى عمل تجزيء لـ\"/home\"\n"
-"(ممكن فقط إذا كان لديك أكثر من تجزيء للينكس).\n"
-"\n"
-"كل تجزيء مُعطى بالشكل التالي: \"الإسم\"، \"السعة\".\n"
-"\n"
-"\"الإسم\" مركب بالسكل التالي: \"نوع القرص الصلب\"، \"رقم القرص الصلب\"،\n"
-"\"رقم التجزيء\" (مثلا، \"hda1\").\n"
-"\n"
-"\"رقم القرص الصلب\" دائما هو حرف بعد \"hd\" أو \"sd\". بالنسبة للأقراص "
-"الصلبة\n"
-"من نوع IDE فإن:\n"
-" * \"a\" تعني \"القرص الصلب الأساسي على متحكم IDE الأساسي\"،\n"
-"\n"
-" * \"b\" تعني \"القرص الصلب الثانوي على متحكم IDE الأساسي\"،\n"
-"\n"
-" * \"c\" تعني \"القرص الصلب الأساسي على متحكم IDE الثانوي\"،\n"
-"\n"
-" * \"d\" تعني \"القرص الصلب الثانوي على متحكم IDE الثانوي\"،\n"
-"\n"
-"أما بالنسبة لأقراص سكزي SCSI فالحرف \"a\" يعني \"أقل معرف SCSI\"، و الحرف \"b"
-"\"\n"
-"يعني \"ثاني أقل معرف SCSI\"، الخ."
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"تثبيت ماندريبا لينكس موزّع على العديد من الأقراص.\n"
-"إن كانت حزمة ما في قرص آخر، سيقوم DrakX بإخراج القرص\n"
-"الحالي و سيطلب منك أن تدخل القرص المطلوب. إن لم يكن القرص المطلوب لديك،\n"
-"فقط اضغط على \"%s\"، ولن يتمّ تثبيت تلك الحزم.."
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"حان الوقت الآن لتحديد أيّ البرامج تريد تثبيتها على نظامك.\n"
-"هناك الآلاف من الحزم المتوفّرة لماندريبا لينكس، و\n"
-"لكي نجعلها أسهل إدارة فقد وضعت الحزم في مجموعات من\n"
-"التّطبيقات المتشابهة.\n"
-"\n"
-"يصنف ماندريبا لينكس الحزم في أصناف أربعة. يمكنك \n"
-"خلط ومطابقة التّطبيقات من الأصناف المتعدّدة، بحيث\n"
-"يحتوي تثبيت \"محطّة عمل\" على تطبيقات من فئة خادم.\"\n"
-"\n"
-" * \"%s\": إن كنت تنوي استخدام جهازك كمحطّة عمل، اختر واحد أو\n"
-"أكثر من المجموعات التي في فئة محطّة العمل.\n"
-"\n"
-" * \"%s\": إن كنت تنوي استخدام جهازك للبرمجة، اختر\n"
-"المجموعات المناسبة من تلك الفئة. مجموعة \"LSB\" المميزة سوف\n"
-"تهيئ نظامك بحيث يتوافق قدر الإمكان مع توصيات قاعدة لينكس القياسية.\n"
-"\n"
-"   اختيار مجموعة \"LSB\" سوف يثبت أيضاً تسلسل النواة \"2.4\"،\n"
-"بدلاً من \"2.6\" الافتراضيّة. هذا للتأكيد على التوافق الكامل للنظام مع LSB.\n"
-"على كل حال، إن لم تختر مجموعة \"LSB\" فسوف\n"
-"لا يزال يكون لديك نظام متوافق 100%% تقريباً مع LSB.\n"
-"\n"
-" * \"%s\": إن كان جهازك سيستخدم كخادم، اختر أيّاً من\n"
-"الخدمات الأكثر شيوعاً ترغب في تثبيتها على جهازك.\n"
-"\n"
-" * \"%s\": هذا هو المكان الذّي تحدّد فيه بيئتك الرّسوميّة المفضّلة.\n"
-"يجب على الأقلّ اختيار واحدة إن كنت تريد أن يكون لديك\n"
-"واجهة رسوميّة متوفّرة.\n"
-"\n"
-"تحريك مؤشّر الماوس عبر اسم مجموعة سيظهر نصّ شرحٍ مختصرٍ\n"
-"عن تلك المجموعة.\n"
-"\n"
-"يمكنك اختيار مربّع \"%s\"، والذي هو مفيد إن كنت معتاداً على\n"
-"الحزم المُوفّرة أو إن كنت متحكماً تماماً\n"
-"بما سيتم تثبيته.\n"
-"\n"
-"إن بدأت التثبيت بالوضع \"%s\"، يمكنك إزالة اختيار كل المجموعات ومنع تثبيت أي "
-"حزم جديدة. هذا مفيد\n"
-"لإصلاح أو تحديث نظام موجود.\n"
-"\n"
-"إن قمت بإلغاء تحديد كلّ المجموعات عند القيام بتثبيت عاديّ\n"
-"(كما هو الحال في التّحديث)، سينبثق حوار يقترح\n"
-"خيارات متعدّدة للتثبيت الأدنى:\n"
-"\n"
-" * \"%s\": تثبيت أقلّ عدد من الحزم الممكنة لتحصل\n"
-"على سطح مكتب رسوميّ عامل.\n"
-"\n"
-" * \"%s\": بتثبيت النّظام الأساسي بالإضافة إلى الأدوات البسيطة وتوابعها\n"
-"من المواثقة. هذا التثبيت مناسب لإعداد خادم.\n"
-"\n"
-" * \"%s\": سوف يثبت أقلّ عدد ممكن من الحزم الضّروريّة\n"
-"للحصول على نظام لينكس عامل. بهذا التّثبيت ستحصل فقط على\n"
-"واجهة سطر الأوامر. الحجم الكلّي لهذا التّثبيت هو حوالي 65\n"
-"ميجابايت."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "محطة عمل"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "تطوير"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "بيئات رسومية"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "اختيار مفرد للحزم"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "ترقية"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "مع X"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "مع وثائق المساعدة الأساسية"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "تثبيت مصغّر جداً"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"إن أخبرت برنامج التثبيت أنك تريد اخيار الحزم فرديّاً،\n"
-"فسوف يقدّم لك شجرة تحتوي كلّ الحزم مصنّفةً بحسب المجموعات و\n"
-"المجموعات الفرعيّة. خلال استعراض الشّجرة، يمكنك تحديد مجموعات بالكامل،\n"
-"مجموعات فرعيّة، أو حزم مفردة.\n"
-"\n"
-"حينما تحدّد حزمة من الشّجرة، يظهر وصفٌ على\n"
-"اليمين يعلمك بالغرض من الحزمة.\n"
-"\n"
-"!! إن تمّ اختيار حزمة خادم، إمّا بسبب أنّك حدّدتها\n"
-"قصداً أو بسبب أنّها كانت جزءً من مجموعة حزم،\n"
-"سوف تسأل التّأكيد على أنّك حقّاً تريد تلك الخادمات أن تكون\n"
-"مثبتة. بشكل افتراضي سيقوم ماندريبا لينكس بتشغيل أي خدمات مثبّتة تلقائيّاً\n"
-"عند بدء التّشغيل. حتى إن كانت آمنة وليس لها أيّ مسائل معروفة حين\n"
-"وقت شحن التّوزيعة، فإنّه من الممكن جدّاً أن\n"
-"تكون الثّغرات الأمنيّة اكتشفت بعد أن تمّ الانتهاء من هذه النّسخة من ماندريبا "
-"لينكس.\n"
-"إن لم تكن تعرف ما يفترض من خدمة معيّنة\n"
-"عمله أو لم سيتمّ تثبيتها، فاضغط على\"%s\". الضّغط على \"%s\"سوف\n"
-"يثبت الخدمات المُسردة وسوف يتمّ تشغيلها تلقائيّاً\n"
-"بشكل افتراضي خلال الإقلاع.!!\n"
-"\n"
-"يستخدم الخيار \"%s\" لتعطيل حوار التّحذير الذي يظهر\n"
-"حينما يحدّد برنامج التثبيت حزمة ليحلّ\n"
-"مسألة اعتماد. بعض الحزم بينها علاقات بحيث\n"
-"يكون تثبيت أحدها يتطلّب تثبيت برامج أخرى أيضاً.\n"
-"يستطيع برنامج التثبيت تحديد الحاجة إلى أي من هذه الحزم\n"
-"لإرضاء الاعتماد لإكمال التّثبيت ينجاح.\n"
-"\n"
-"تسمح لك الأيقونة الصّغيرة للقرص المرن في أسفل اللائحة بتحميل\n"
-"لائحة الحزم المُنشأة خلال تثبيت سابق. يكون هذا نافعاً إن كان\n"
-"لديك عدد من الأجهزة التي تودّ تهيئتها بشكل مشابه. الضّغط\n"
-"على هذه الأيقونة سيسألك إدخال قرص مرن أنشئ في\n"
-"نهاية تثبيت آخر. انظر التّلميح الثّاني من الخطوة الأخيرة عن كيفيّة\n"
-"إنشاء قرص مرن كهذا."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "مُعتمدات آلية"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": الضغط على \"%s\" سيفتح معالج تهيئة\n"
-"الطابعة. اقرأ الفصل المختص في ``دليل المبتدئ''\n"
-"لمزيد من المعلومات عن كيفية تهيئة طابعة جديدة. الواجهة\n"
-"المقدمة في دليلنا\n"
-"هي مماثلة لتلك المستخدمة أثناء التثبيت."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "تهيئة"
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"يستخدم هذا الحوار لاختيار الخدمات التي تودّ تشغيلها عند بدء التشغيل.\n"
-"\n"
-"سيقوم DrakX بعرض قائمة بكل الخدمات المتوفرة في هذا التثبيت.\n"
-"راجع كل خدمة بتمعن و قم بإزالة التأشير من تلك الخدمات التي لا تحتاجها\n"
-"بشكل دائم عند الإقلاع.\n"
-"\n"
-"سيتم عرض شرح قصير حول الخدمة عند\n"
-"اختيارها. عموماً، إن لم تكن متأكد ما إذا كانت الخدمة مفيدة أم لا،\n"
-"فمن الأفضل ترك الخيار الإفتراضي.\n"
-"\n"
-"!! في هذه المرحلة كن حذراُ إذا كنت تريد استخدام ماكينتك\n"
-"كخادم: ربما لن تريد بدء أي خدمات لا تحتاجها.\n"
-"فضلاً تذكر أن العديد من الخدمات قد تكون خطرة إذا كانت\n"
-"متاحة على الخادم. بشكل عام اختر فقط الخدمات التي تحتاجها بالفعل !!"
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"يقوم جنو/لينكس بإدارة الوقت بحسب توقيت غرينتش ثم يترجمه إلى\n"
-"التوقيت المحلي بحسب المنطقة الزّمنية التي اخترتها. إذا كانت الساعة\n"
-"التي في اللّوحة الرئيسية مضبوطة على التوقيت المحلي، يمكنك تعطيل ذلك\n"
-"عن طريق إزالة اختيار \"%s\" و التي ستجعل\n"
-"جنو/لينكس يعلم أن ساعة النظام وساعة الجهاز في نفس المنطقة الزّمنيّة. هذا مفيد "
-"عندما يستضيف الجهاز\n"
-"أيضاً نظام تشغيل آخر.\n"
-"\n"
-"الخيار \"%s\" سيقوم آلياً بضبط الساعة عن طريق الإتصال\n"
-"بخادم وقت بعيد على الإنترنت. كي تعمل هذه الميزة، يجب أن تكون لديك\n"
-"وصلة انترنت عاملة. من الأفضل اختيار خادم الوقت\n"
-"الأقرب إليك. في الحقيقة يُثبت هذا الخيار خادم وقت يمكن استخدامه\n"
-"من قبل الأجهزة الأخرى على الشبكة المحلية أيضاً."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "ساعة الجهاز مضبوطة على توقيت غرينتش"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "تزامن وقت آلي"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"بطاقة الرسوم\n"
-"\n"
-"   برنامج التثبيت يقوم باكتشاف وتهيئة\n"
-"البطاقة الموجودة على نظامك بشكل آلي. إن لم يحدث ذلك، يمكنك\n"
-"اختيار البطاقة المُتثبيتة لديك بالفعل من القائمة.\n"
-"\n"
-"   في حال كانت هناك خادمات رسومية مختلفة لبطاقتك،\n"
-"مع أو بدون تعزيز للرسوم ثلاثية الأبعاد، ستُسأل اختيار الخادم الذي\n"
-"يناسب احتياجاتك أكثر."
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"؛X (إشارةً إلى نظام نوافذ X) هو قلب الواجهة الرّسوميّة لجنو/لينكس\n"
-"الذي تعتمد عليه كل البيئات الرّسوميّة (كيدي، جينوم، AfterStep،\n"
-"WindowMaker، وغيرها) المضمّنة مع ماندريبا لينكس.\n"
-"\n"
-"سوف تقدّم لك لائحة من معامِلاتٍ مختلفة يمكنك تغييرها للحصول\n"
-"على العرض الرّسوميّ الأمثل.\n"
-"\n"
-"بطاقة الرسوم\n"
-"\n"
-"   عادةً سيقوم المثبت بالاستكشاف والتّهيئة الآليّة\n"
-"للبطاقة الرّسوميّة المثبّثة على جهازك. إن لم يكن ذلك الحال، فيمكنك\n"
-"اختيار البطاقة الموجودة لديك بالفعل من هذه القائمة.\n"
-"\n"
-"   في حال توفّرت عدّة خادماتٍ لبطاقتك،\n"
-"مع أو بدون التعزيز الثّلاثي الأبعاد، سوف يطلب منك أن تحدّد الخادم\n"
-"الأكثر ملائمة لحاجاتك.\n"
-"\n"
-"\n"
-"\n"
-"الشّاشة\n"
-"\n"
-"   عادةً سيقوم المُتثبيت بالاستكشاف والتهيئة الآليّة\n"
-"للشّاشة المُتّصلة بجهازك. إن لم تكن صحيحة، فيمكنك\n"
-"اختيار الشّاشة المتّصلة بجهازك بالفعل من هذه القائمة.\n"
-"\n"
-"\n"
-"\n"
-"الاستبانة\n"
-"\n"
-"   يمكنك هنا اختيار الاستبانة وعمق الألوان المتوفّرين\n"
-"لعتادك الرّسومي. اختر الأكثر مناسبةً لحاجاتك (سوف تكون قادراً على\n"
-"تغيير ذلك بعد التّثبيت على كل حال). تظهر عيّنة من التهيئة\n"
-"المحدّدة في صورة الشّاشة.\n"
-"\n"
-"\n"
-"\n"
-"اختبار\n"
-"\n"
-"   قد لا يظهر هذا المُدخل بحسب عتادك.\n"
-"\n"
-"   سوف يحاول النّظام فتح شاشة رسوميّة بالاستبانة المرغوبة.\n"
-"إذا رأيت رسالة الاختبار خلال الاختبار وأجبت بـ\"%s\"،\n"
-"فسوف يتقدّم DrakX إلى الخطوة التّالية. إن لم تستطع رؤية الرّسالة، فهذا\n"
-"يعني أن جزءً ما من التّهيئة المكتشفة آلياً كان غير صحيح\n"
-"وسينتهي الاختبار تلقائيّاً بعد 12 ثانية، معيداً إيّاك إلى\n"
-"القائمة. غيّر الإعدادات حتّى تحصل على عرض رسوميّ صحيح.\n"
-"\n"
-"\n"
-"\n"
-"خيارات\n"
-"\n"
-"   يمكنك هنا اختيار ما إذا كنت تريد جهازك أن يبدّل تلقائيّاً\n"
-"إلى الواجهة الرّسوميّة عند الإقلاع. طبعاً ستفضّل\n"
-"أن تختار \"%s\" إن كان جهازك سيعمل كخادم، أو إن كنت لم تنجح في\n"
-"تهيئة العرض."
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"الشاشة\n"
-"\n"
-"   يمكن لبرنامج التثبيت اكتشاف و تهيئة الشاشة المتصلة بماكينتك\n"
-"آلياً. ان لم يحدث ذلك، يمكنك اختيار الشاشة التي لديك\n"
-"من القائمة."
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"الاستبانة\n"
-"\n"
-"   يمكنك اختيار الاستبانة وعمق الألوان في الحدود المتوفرة للعتاد.\n"
-"اختر تلك التي تناسب احتياجاتك (لا تزال\n"
-"تستطيع تغيير تلك الخيارات بعد التثبيت). يتم عرض عينة\n"
-"من التهيئة المختارة في صورة الشاشة."
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"في حال كانت هناك خادمات مختلفة للبطاقة الخاصة بك، مع أو\n"
-"دون تعزيز للرسوم ثلاثية الأبعاد، ستُسأل اختيار الخادم الذي\n"
-"يناسب احتياجاتك."
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"الخيارات\n"
-"\n"
-"   تخولك هذه الخطوة اختيار ما إذا كنت تريد بدء الواجهة الرسومية\n"
-"عند بدء النظام تلقائيّاً. بوضوح،\n"
-"ستختار \"%s\" إذا كانت ماكينتك ستستخدم كجهاز\n"
-"خادم، أو إذا لم تنجح في تهيئة العرض\n"
-"بشكل صحيح."
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"عند هذه النقطة، عليك أن تقرر أين تريد تثبيت نظام\n"
-"التشغيل ماندريبا لينكس على القرص الصلب الخاص بك. إذا كان القرص الصلب\n"
-"فارغاً أو أن نظام تشغيل آخر يستخدم كل المساحة المتوفرة فسوف\n"
-"تحتاج إلى تجزئة القرص الصلب. بشكل عام، تجزئة القرص الصلب\n"
-"تعني تقسيم القرص الصلب منطقياً لإنشاء المساحة المطلوبة لتثبيت\n"
-"نظام ماندريبا لينكس الجديد الخاص بك.\n"
-"\n"
-"عملية تقسيم القرص الصلب لا يمكن التّراجع عنها عادةًَ\n"
-"كما أنها قد تتسبب في خسارة للبيانات إن وجد هناك نظام تشغيل\n"
-"آخر مثبت على هذا القرص الصلب، لذا فإنّ تجزئة القرص قد تكون عمليّةً صعبةً ومرهقة\n"
-"إن لم تكن مستخدماً محترفاً. من حسن الحظ، يوفّر DrakX معالجاً يسهل العملية.\n"
-"قبل متابعة هذه الخطوة، اقرأ بقية هذا القسم و قبل كل شئ، خذ وقتك.\n"
-"\n"
-"اعتماداً على إعدادات القرص الصلب، تتوفر العديد من الخيارات:\n"
-"\n"
-" * \"%s\": هذا الخيار سيقوم بعملية تجزئة آلية\n"
-"للأقراص الصلبة الفارغة. إذا استخدمت هذا الخيار، لن تكون هناك إشعارات أخرى.\n"
-"\n"
-" * \"%s\": يكون المرشد قد اكتشف تجزيء أو أكثر من\n"
-"تجزيئات لينكس على القرص الصلب. إذا كنت تريد استخدامها، اختر هذا\n"
-"الخيار. سيتم بعد ذلك سؤالك عن أماكن التركيب المرتبطة بكل\n"
-"تجزيء. يتم اختيار أماكن التركيب المعتادة افتراضياً،\n"
-"ولأغلب المستخدمين فإنها فكرة جيدة تركها كما هي.\n"
-"\n"
-" * \"%s\" : إذا كان ميكروسوفت ويندوز مثبتاً على القرص الصلب و يحتل كل "
-"المساحة \n"
-"التي عليه، ستحتاج إلى إنشاء مساحة فارغة لبيانات جنو/لينكس. لعمل ذلك يمكنك "
-"حذف\n"
-"تجزيء و بيانات ميكروسوفت ويندوز (انظر حلّ ``إزالة القرص بأكمله'')\n"
-"أو قم بتغيير حجم تجزيء ميكروسوفت ويندوز FAT. يمكن تصغير الحجم\n"
-"دون أي خسارة للبيانات، إن كنت قمت بإزالة تجزّئات التجزيء الخاص بويندوز.\n"
-"يفضّل بشدّة نسخ بياناتك احتياطياً.. استخدام هذا الخيار\n"
-"منصوح به إذا كنت تريد استخدام كل من ماندريبا لينكس و ميكروسوفت ويندوز\n"
-"على نفس الحاسب.\n"
-"\n"
-"   قبل اختيارك لهذا الخيار، عليك أن تعلم أنه بعد هذا\n"
-"الإجراء، ستتقلص مساحة تجزيء ميكروسوفت ويندوز عن ما قبل\n"
-"ستكون لديك مساحة فارغة أقل على ميكروسوفت ويندوز\n"
-"لتخزين بياناتك أو تثبيت برامج جديدة.\n"
-"\n"
-" * \"%s\": إذا كنت تريد حذف كل البيانات و كل التجزيئات\n"
-"الموجودة على القرص الصلب و استبدالها بنظام ماندريبا لينكس الجديد\n"
-"الخاص بك، اختر هذا الخيار. كن حذراً، لأنك لن تتمكن من التراجع\n"
-"بعد أن تقوم بالتأكيد.\n"
-"\n"
-"   !! إن اخترت هذا الخيار، سيتم حذف كل البيانات الموجودة على القرص. !!\n"
-"\n"
-"؛ * \"%s\". هذا الخيار يظهر في حال كان القرص محتلاً بأكمله\n"
-"من قبل ميكروسوفت ويندوز. سيقوم هذا الخيار ببساطة بمحو كل شيء على القرص و\n"
-"بدء التثبيت من الصفر، مجزّأً كلّ شيء من لاشيء.\n"
-"\n"
-"   !! إن اخترت هذا الخيار، ستخسر كلّ البيانات على القرص الخاص بك. !!\n"
-"\n"
-" * \"%s\": اختر هذا الخيار إذا كنت تريد\n"
-"تقسيم القرص الصلب بشكل يدوي. كن حذراً -- هذا الخيار قوي\n"
-"لكنه خطير و من الممكن أن تفقد بياناتك بسهولة. لهذا فإن\n"
-"هذا الخيار مفضّل فقط إذا كنت قد قمت بشئ مماثل من قبل \n"
-"و لديك بعض الخبرة. لمزيد من التعليمات حول استخدام أداة DiskDrake\n"
-"راجع قسم ``إدارة التجزيئات'' في\n"
-"``دليل المبتدئ''."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "استخدام المساحة الفارغة"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "استخدام التجزيء الموجود"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "استخدام المساحة الفارغة على تجزيء ويندوز"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "مسح كل القرص"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "حذف ويندوز"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "تجزئة قرص مخصصة"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"ها أنت ذا. التثبيت قد اكتمل الآن ونظام جنو/لينكس الخاصّ بك\n"
-"جاهز للاستخدام. فقط اضغط \"%s\" لإعادة تشغيل نظامك. لا تنْسَ أن\n"
-"تزيل وسط التّثبيت (قرص مدمج أو مرن). أوّل شيء يجب أن\n"
-"تراه بعد أن ينتهي حاسبك من فحص عتاده هو\n"
-"قائمة محمّل الإقلاع، والتي تعطيك الخيار لأيّ نظام تشغيل تريد بدءه.\n"
-"\n"
-"زرّ \"%s\" يظهر زرّين إضافيّين كي:\n"
-"\n"
-" * \"%s\": تنشئ قرص تثبيت مرن يساعدك آليّاً\n"
-"بالقيام بالتّثبيت بأكمله دون مساعدة المُشغّل، كما هو\n"
-"التّثبيت الذي قمت بتهيئته للتّوّ.\n"
-"\n"
-"   لاحظ أن خيارين مختلفين متوفّرين بعد الضّغط على الزّر:\n"
-"\n"
-"    * \"%s\". هذا تثبيت آليّ جزئيّاً. خطوة التّجزئة\n"
-"هي الإجراء الوحيد التّفاعليّ.\n"
-"\n"
-"    \"%s\". التّثبيت الآليّ بالكامل: يُعاد كتابة القرص الصّلب\n"
-"بالكامل، وتفقد كلّ البيانات.\n"
-"\n"
-"   هذه الميزة مفيدة جدّاً عند تثبيت عدد من الماكينات المتشابهة.\n"
-"راجع قسم التّثبيت الآلي على موقعنا لمزيد من المعلومات.\n"
-"\n"
-" * \"%s\": يحفظ لائحة بالحزم المُختارة في هذا التّثبيت. كي\n"
-"تستخدم هذا الاختيار مع تثبيت آخر، أدخل القرص المرن وابدأ\n"
-"التّثبيت. على الملقن، اضغط مفتاح [F1] واكتب\n"
-">> linux defcfg=\"floppy\" << ثمّ اضغط مفتاح الإدخال.\n"
-"\n"
-"(*) ستحتاج إلى قرص مرن منسّق بنسق FAT. لإنشاءه على GNU/Linux، أدخل\n"
-"\"mformat a:\"، أو \"fdformat /dev/fd0\" تتبعها \"mkfs.vfat\n"
-"/dev/fd0\"."
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "إنشاء قرص تثبيت آلي"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "إعادة"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "آلي"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "حفظ اختيار الحزم"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"إن اخترت إعادة استخدام بعض تجزيئات جنو/لينكس القديمة، قد ترغب\n"
-"بإعادة تنسيق بعضها ومسح أية بيانات تحتويها. لعمل ذلك، الرجاء،\n"
-"اختيار تلك التجزيئات أيضاً.\n"
-"\n"
-"الرجاء ملاحظة أنّه ليس من الضّروري إعادة تنسيق كل التّجزيئات الموجودة مسبقاً.\n"
-"يجب عليك إعادة تنسيق التجزيئات التي تحتوي نظام\n"
-"التشغيل (مثل \"/\", \"/usr\" or \"/var\"( ولكن ليس عليك\n"
-"إعادة تنسيق التجزيئات التي تحتوي بيانات تودّ الاحتفاظ بها (عادة\n"
-"\"/home\").\n"
-"\n"
-"رجاء كن على حذر عند اختيار التّجزيئات. بعد إعادة التّنسيق، كلّ البيانات التي\n"
-"على التّجزيئات المحدّدة سوف تُحذف ولن تكون قادراً على\n"
-"استعادتها.\n"
-"\n"
-"اضغط على \"%s\" عندما تكون جاهزاً لتنسيق التّجزيئات.\n"
-"\n"
-"اضغط على \"%s\" إن كنت تريد اختيار تجزيء آخر من أجل\n"
-"تثبيت نظام التّشغيل ماندريبا لينكس الخاصّ بك.\n"
-"\n"
-"اضغط على \"%s\" إن كنت ترغب باختيار تجزيئات سيتمّ تفحّصها من أجل\n"
-"الكتل السّيئة على القرص."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "السابق "
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"في الوقت الذي تقوم فيه بتثبيت ماندريبا لينكس، قد يكون تم تحديث\n"
-"بعض الحزم منذ الإصدار الأول. قد يكون تم إصلاح بعض العيوب\n"
-"أو حل المشاكل الأمنية. لكي تستفيد من هذه التحديثات، يمكنك\n"
-"الآن تنزيل هذه التحديثات عبر الإنترنت. اختر\n"
-"\"%s\" إذا كانت لديك وصلة انترنت عاملة، أو \"%s\" إذا كنت تفضل\n"
-"تثبيت هذه التحديثات لاحقاً.\n"
-"\n"
-"اختيار \"%s\" يعرض قائمة بالأماكن التي يمكن منها الحصول\n"
-"على التحديثات. اختر المكان الأقرب إليك. سيتم عرض قائمة شجريّة بالحزم:\n"
-"راجع اختياراتك، ثم اضغط \"%s\" لجلْب و تثبيت\n"
-"الحزم المختارة، أو \"%s\" لإلغاء التّحديث."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "تثبيت"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"عند هذه النقطة، سيسمح لك DrakX باختيار المستوى الأمني الذي ترغب به\n"
-"لهذا الجهاز. بديهياً، يجب تعيين مستوى أمني\n"
-"عالٍ إذا كان الجهاز يحتوي على معلومات هامة، أو إذا كان الجهاز\n"
-"سيُستخدم للإتصال بالإنترنت. إنّ استخدام مستوى أمن عالٍ يأتي\n"
-"عادة على حساب سهولة الإستخدام.\n"
-"\n"
-"إن لم تكن تعرف ماذا تختار، أبق الاختيار الافتراضي. سوف تكون\n"
-"قادراً على تغيير مستوى الأمن لاحقاً باستخدام الأداة draksec من\n"
-"لوحة تحكّم ماندريبا .\n"
-"\n"
-"يُعْلم الحقل \"%s\" نظام المُستخدم على هذا الجهاز الذي\n"
-"سيكون مسؤولاً عن الأمن. رسائل الأمن ستُرسل إلى ذلك\n"
-"العنوان."
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "مدير الأمن"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"عند هذه النقطة، تحتاج لاختيار أي التجزيئات ستستخدم\n"
-"لتثبيت نظام ماندريبا لينكس. إن كانت التجزيئات بالفعل\n"
-"مُعرّفة، إمّا من تثبيت سابق لجنو/لينكس أو بواسطة\n"
-"أداة أخرى، يمكن أن تستخدم التجزيئات الحاليّة . وإلا، يجب أن تُعَرَّف\n"
-"تجزيئات القرص الصّلب.\n"
-"\n"
-"لإنشاء التجزيئات، يجب أوّلاً يجب أن تختار قرص صلب. يمكن أن تختار\n"
-"قرص للتّجزئة بالضّغط على ''hda'' لقرص IDE الأوّل،\n"
-"\"hdb\" للثّاني، \"sda\" لقرص SCSI الأوّل وهكذا.\n"
-"\n"
-"لتقوم بتجزئة القرص الصّلب المحدّد، يمكنك استخدام هذه الخيارات:\n"
-"\n"
-" * \"%s\": هذا الخيار يحذف كل التجزيئات على القرص الصّلب المحدّد\n"
-"\n"
-" * \"%s\": هذا الخيار يمكّنك من إنشاء تجزيئات ext3 والذّاكرة البديلة آليّاً\n"
-"في المساحة الشّاغرة لقرصك الصّلب\n"
-"\n"
-" * %s: يعطي حقّ الوصول إلى مزايا إضافيّة:\n"
-"\n"
-" * \"%s\": يحفظ جدول التجزئة إلى قرص مرن. مفيد لاسترجاع لاحق\n"
-"لجدول التجزئة إن كان ضروريّاً. من المُستحسن جداً\n"
-"أن تقوم بهذه الخطوة.\n"
-"\n"
-" * %s: يسمح لك باستعادة جدول تجزئة محفوظ مسبقاً من\n"
-"قرص مرن.\n"
-"\n"
-" * \" %s\": إن كان جدول التّجزئة معطوباً، يمكنك محاولة استعادته\n"
-"باستخدام هذا الخيار. رجاءً كن على حذر وتذكّر أنّه لا\n"
-"يعمل دائماً.\n"
-"\n"
-" * \"%s\": يتجاهل كلّ التّغييرات ويعيد تحميل جدول التّجزئة الذي كان\n"
-"أصلاً على القرص الصّلب.\n"
-"\n"
-" * \"%s\": إزالة اختيار هذا الخيار سيجبر المستخدمين على القيام يدويّاً بتجهيز "
-"و\n"
-"فكّ الوسائط القابلة للإزالة كالأقراص المرنة والمدمجة.\n"
-"\n"
-" * \"%s\": استخدم هذا الخيار إن رغبت في استخدام المرشد لتجزئة\n"
-"قرصك الصّلب. هذا مستحسن إن لم يكن لديك فهم جيّد\n"
-"للتّجزئة.\n"
-"\n"
-" * \"%s\": استخدم هذا الخيار لإلغاء تغييراتك.\n"
-"\n"
-" * \"%s\": يوفّر أعمالاً إضافيّة على التجزيئات )النّوع، الخيارات، التّنسيق(\n"
-"ويعطيك المزيد من المعلومات حول القرص الصّلب.\n"
-"\n"
-" * \"%s\": عندما تنتهي من تجزئة قرصك الصّلب، سوف يقوم هذا\n"
-"بحفظ تغييرات إلى القرص.\n"
-"\n"
-"عند تحديد الحجم لتجزيء ما، يمكنك تحديد حجم التّجزيء بدقّة\n"
-"باستخدام مفاتيح الأسهم للوحة مفاتيحك.\n"
-"\n"
-"ملاحظة: يمكنك الوصول إلى أيّ خيار باستخدام لوحة المفاتيح. تنقّل بين\n"
-"التجزيئات باستخدام [TAB] وأسهم أعلى/أسفل.\n"
-"\n"
-"عندما تُحدّد تجزيءً، يمكنك استخدام:\n"
-"\n"
-" * Ctrl-c لإنشاء تجزيء جديد )عندما يكون تجزيء فارغ مُحدّد(.\n"
-"\n"
-" * Ctrl-d لحذف تجزيء\n"
-"\n"
-" * Ctrl-m لتحدّد مكان التركيب.\n"
-"\n"
-"لتحصل على معلومات حول أنواع أنظمة الملفّات المختلفة المتوفّرة، رجاءً\n"
-"اقرا فَصْل ext2FS من ``الدّليل المرجعي``.\n"
-"\n"
-"إن كنت تقوم بالتّثبيت على ماكينة PPC، ستحتاج أن تنشئ تجزيء HFS\n"
-"``bootstrap`` صغير بحجم 1 ميجابايت على الأقلّ والذي سيستخدم بواسطة مُحمّل "
-"الإقلاع  yaboot.\n"
-"إن اخترت أن تجعل التجزيء أكبر قليلاً، لنقل 50 ميجابايت، قد تجده\n"
-"مفيد لتخزين نواة احتياطية وصور ramdisk من أجل\n"
-"أوضاع الإقلاع الطّارئة."
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "التركيب الآلي للوسائط القابلة للإزالة"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "التغيير إلى الوضع العادي/وضع الخبير"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"تمّ اكتشاف أكثر من تجزيء ميكروسوفت على قرصك الصّلب.\n"
-"رجاء اختيار القرص الذي تريد تغيير حجمه كي تتثبيت\n"
-"نظام تشغيل ماندريبا لينكس الجديد.\n"
-"\n"
-"كل تجزيء مُسرد كما يلي: \"اسم لينكس\"، \"اسم ويندوز\"\n"
-"\"الكثافة\".\n"
-"\n"
-"\"اسم لينكس\" مركّب: \"نوع القرص الصلب\"، \"رقم القرص الصلب\"،\n"
-"\"رقم التّجزيء\" (مثلاً، \"hda1\").\n"
-"\n"
-"\"نوع القرص الصلب\" هو \"hd\" إن كان القرص من نوع IDE و\n"
-"\"sd\" إن كان من نوع SCSI.\n"
-"\n"
-"\"رقم القرص الصّلب\" هو دائماً حرف بعد \"hd\" أو \"sd\". لأقراص IDE الصّلبة:\n"
-"\n"
-" * \"a\" يعني \"القرص الصّلب الرّئيسي على مُتحكّم IDE الأوّلي\"؛\n"
-"\n"
-" * \"b\" يعني \"القرص الصّلب الثّانوي على مُتحكّم IDE الأوّلي\"؛\n"
-"\n"
-" * \"c\" يعني \"القرص الصّلب الرّئيسي على مُتحكّم IDE الثّانوي\"؛\n"
-"\n"
-" * \"d\" يعني \"القرص الصّلب الثّانوي على مُتحكّم IDE الثّانوي\"؛\n"
-"\n"
-"بالنّسبة لأقراص SCSI الصّلبة، \"a\" يعني \"أقلّ رقم تعريف SCSI\"، و\"b\" يعني\n"
-"\"ثاني أقلّ رقم تعريف SCSI\"، إلخ.\n"
-"\n"
-"\"اسم ويندوز\" هو الحرف الخاص بقرصك الصّلب ضمن ويندوز (القرص الأوّل\n"
-"أو التجزيء المسمّى \"C:\")."
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"%s\": تأكد من اختيار البلد الحالي. إذا لم تكن في هذا\n"
-"البلد، اضغط على زر \"%s\" و اختر بلداً آخر. إذا لم تكن\n"
-"بلدك في القائمة اضغط زر \"%s\" لإظهار قائمة كاملة\n"
-"بالبلدان."
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"يتم تنشيط هذه الخطوة فقط إذا عُثر على تجزيء جنو/لينكس موجود\n"
-"على ماكينتك.\n"
-"\n"
-"يحتاج DrakX الآن إلى معرفة ما إذا كنت تريد القيام بتثبيت جديد أو ترقية\n"
-"نظام ماندريبا لينكس الموجود لديك مسبقاً:\n"
-"\n"
-" * \"%s\": في الأغلب، يقوم هذا بإزالة النظام القديم.\n"
-"على أيّ، بناءً على طريقة تجزئتك، يمكنك منع الكتابة على بعض\n"
-"من بياناتك الموجودة مسبقاً (بالطبع الأدلة \"المنزلية\").\n"
-"إن كنت تريد تغيير طريقة تجزئة القرص الصلب، أو تريد تغيير نظام\n"
-"الملفّات، عليك باستخدام هذا الخيار.\n"
-"\n"
-" * \"%s\": صنف التثبيت هذا يسمح لك بتحديث الحزم\n"
-"المثبّتة حاليّاً على نظام ماندريبا لينكس الخاص بك. لن يتم تغيير\n"
-"بياناتك أو تقسيمات القرص الصلب. أغلب\n"
-"خطوات التهيئة الأخرى لا تزال متوفّرة، مثل التثبيت الاعتيادي.\n"
-"\n"
-"استخدام خيار ``الترقية'' يجب أن يعمل بشكل جيد على أنظمة ماندريبا لينكس\n"
-"التي تعمل على إصدار \"8.1\" أو ما بعده. لا ينصح بالترقية\n"
-"من إصدرات ماندريبا لينكس قبل \"8.1\"."
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"اعتماداً على اللغة التي اخترتها ()، سيقوم DrakX آليّاً\n"
-"باختيار تهيئة لوحة المفاتيح. تحقّق من أنّ\n"
-"الاختيار يناسبك أو اختر توزيعة لوحة مفاتيح أخرى.\n"
-"\n"
-"أيضاً، قد لا تكون لديك لوحة مفاتيح توافق لغتك تماماً:\n"
-"مثلاً ربما تكون سويسريّاً متكلماً للغة الإنجليزية، قد تكون لديك\n"
-"لوحة مفاتيح سويسرية. أو إذا كنت تتكلم الإنجليزية لكنك موجود في كيبك،\n"
-"ربما تجد نفسك في نفس الموقف حيث لا تتطابق لغتك الأم\n"
-"مع لوحة المفاتيح. في الحالتين، ستسمح لك خطوة التثبيت\n"
-"باختيار لوحة مفاتيح مناسبة من القائمة.\n"
-"\n"
-"اضغط زر \"%s\" لعرض قائمة بكل\n"
-"لوحات المفاتيح المدعومة.\n"
-"\n"
-"إذا اخترت لوحة مفاتيح لحروف غير لاتينية، فسيسمح لك\n"
-"الحوار التالي باختيار اختصارات لوحة المفاتيح التي\n"
-"ستبدل وضع لوحة المفاتيح بين الحروف اللاتينية والغير لاتينية."
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"الخطوة الأولى هي اختيار اللغة المفضلة.\n"
-"\n"
-"اختيارك للغة المفضلة سيؤثر على برنامج التثبيت،\n"
-"والنظام بشكل عام. أولاً، اختر المنطقة التي\n"
-"تقع فيها، ثم اللغة التي تتحدثها.\n"
-"\n"
-"ضغط زر \"%s\" سيسمح لك باختيار لغات\n"
-"أخرى ليتم تثبيتها على محطة عملك، ومن ثم\n"
-"تثبيت الملفات الخاصة باللغات لوثائق المساعدة والتطبيقات. مثلاً\n"
-"إذا كنت ستستضيف مستخدمين من أسبانيا على ماكينتك، اختر الإنجليزية\n"
-"كلغة افتراضية في العرض الشجري و\"%s\" في القسم المتقدم.\n"
-"\n"
-"حول دعم UTF-8 (يونيكود): يونيكود هي طريقة تشفير محارف جديدة غرضها\n"
-"تغطية كلّ اللّغات الموجودة. مع ذلك فإن دعمها الكامل في جنو/لينكس ما\n"
-"زال قيد التّطوير. لذلك السّبب، سيستخدمها ماندريبا لينكس أو لا يستخدمها\n"
-"بناءً على خيارات المستخدم:\n"
-"\n"
-" * إن اخترت لغة ذات تراث قويّ (اللّغات\n"
-"لاتيني1، والروسيّة، واليابانيّة، والصينيّة، والكوريّة، والتايلنديّة، واليونانيّة، "
-"والتّركيّة،\n"
-"ومعظم لغات iso-8859-2(، فسيستخدم التّشفير التّراثيّ بشكل افتراضي؛\n"
-"\n"
-" * اللّغات الأخرى ستستخدم يونيكود بشكل افتراضيّ؛\n"
-"\n"
-"إن كان هناك حاجة للغتين أو أكثر، وتلك اللّغات لا تستخدم\n"
-"نفس التّشفير، فسيستخدم يونيكود للنّظام بأكمله؛\n"
-"\n"
-" * أخيراً، يُمكن إجبار استخدام يونيكود للنظام بطلب المستخدم بواسطة\n"
-"اختيار الخيار \"%s\" بشكل منفصل والذي\n"
-"اختيرت لغته.\n"
-"\n"
-"لاحظ أنّك غير محدود باختيار لغة إضافيّة واحدة.\n"
-"يمكنك اختيار عدّة لغات، أو حتّى تثبيتها كلّها باختيار مربّع \"%s\".\n"
-"اختيار دعم لغة يعني أن التّرجمات، والخطوط، ومدقّقات\n"
-"الإملاء، إلخ. لتلك اللّغة سوف تكون مثبتة أيضاً.\n"
-"\n"
-"للتبديل بين اللغات المختلفة المثبتة على نظامك، يمكن\n"
-"تشغيل الأمر \"/usr/sbin/localedrake\" كمستخدم \"root\" لتغيير\n"
-"اللّغة المستخدمة من قبل النّظام بأكمله. تشغيل الأمر كمستخدم عاديّ\n"
-"سوف يغيّر فقط إعدادت اللّغة الخاصّة بذلك المستخدم بذاته."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "الأسبانية"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"عادة، لا يواجه DrakX مشاكل في استكشاف عدد الأزرار في\n"
-"الماوس الخاصّة بك. إذا حدث ذلك، يفترض أن لديك ماوس ذات زرّين وسوف\n"
-"يقوم بتهيأتها لمحاكاة الزرّ الثالث. الزرّ الثالث للماوس ذات\n"
-"الزرّين يمكن الحصول على تأثيره بالضّغط على الزرّين الأيسر\n"
-"والأيمن بنفس الوقت. سوف يعرف DrakX تلقائيّاً ما إذا كانت الماوس الخاصّة بك "
-"تستخدم\n"
-"واجهة PS/2، أو متوالية أو USB.\n"
-"\n"
-"في حال كان لديك ماوس ذات ثلاثة أزرار دون عجل، يمكنك اختيار الماوس\n"
-"التي تظهر بإسم \"%s\". سيقوم DrakX بعدها بتهيأت الماوس الخاصّة بك حتّى تستطيع\n"
-"مُحاكاة العجل بها: لتقوم بذلك، اضغط الزرّ الأوسط وحرّك\n"
-"الماوس للأعلى وللأسفل.\n"
-"\n"
-"إن رغبت لسبب ما اختيار نوع ماوس آخر، اخترها\n"
-"من اللائحة المُقدَّمة.\n"
-"\n"
-"يمكنك تحديد المُدخل \"%s\" لاختيار نوع ماوس ``شامل'' والذي\n"
-"سوف يعمل تقريباً مع كل الأنواع.\n"
-"\n"
-"إن اخترت ماوس غير الافتراضيّة، سوف تظهر شاشة\n"
-"اختباريّة. استخدم الأزرار والعجل للتأكّد من أن الإعدادات\n"
-"صحيحة وأنّ الماوس تعمل بشكل صحيح. إن لم تكن الماوس\n"
-"تعمل بشكل جيّد، اضغط مفتاح المسافة أو [الإرجاع] لإلغاء الاختبار و\n"
-"العودة إلى لائحة الخيارات.\n"
-"\n"
-"كثيراً ما يتعذر استكشاف أجهزة الماوس ذات العجلات تلقائيّاً، لذا ستحتاج\n"
-"لاختيار الماوس من القائمة. تأكّد من اختيار التي تطابق\n"
-"المنفذ الذي تتّصل به الماوس الخاصّة بك. بعد اختيار الماوس و\n"
-"الضّغط على الزّرّ \"%s\"، تظهر صورة الماوس على الشّاشة. أدرْ\n"
-"عجل الماوس للتّأكّد من أنّه مُنشّط بشكل صحيح. أثناء تحريك\n"
-"عجل الماوس، ستراه كذلك يتحرك على الشاشة.\n"
-"قم باختبار الأزرار وتحقق من أن المؤشر يتحرك على الشاشة\n"
-"بينما تقوم بتحريكه حولها."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "بمحاكاة العجلة"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "عالمي | أيّ ماوس PS/2 و USB"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"الرجاء اختيار المنفذ الصحيح. مثلاً لمنفذ \"COM1\" في\n"
-"ويندوز اسمه \"ttys0\" في لينكس."
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"هذه هي أهم خطوة تتخذها لأمن نظام جنو/لينكس الخاصّ بك:\n"
-"عليك إدخال كلمة مرور المستخدم \"root\". \"Root\" هو\n"
-"مدير النظام والمستخدم الوحيد المخوّل بتحديث النظام، وإضافة المستخدمين،\n"
-"وتغيير تهيئة النظام بشكل عام، الخ. باختصار يمكن للمستخدم \"root\" أن يفعل\n"
-"كل شئ! لذا عليك اختيار كلمة مرور صعبة\n"
-"التّخمين: سيخبرك DrakX إذا كانت كلمة المرور التي تستخدمها سهلة. كما\n"
-"ترى، لست مجبراً على إدخال كلمة مرور، لكننا ننصح بشدة ألا تفعل هذا. جنو/لينكس "
-"مُعرّص لأخطاء المُشغّل كأيّ\n"
-"نظام تشغيل آخر. وحيث أن \"الجذر\" يمكنه تعدي كل الحدود\n"
-"و قد يحذف كل البيانات عن غير قصد بالوصول إلى التجزيئات بلا مبالاة\n"
-"فإنّه من المهمّ أن يكون من الصّعب أن تصبح المستخدم\n"
-"\"root\".\n"
-"\n"
-"يجب أن تكون كلمة المرور خليطاً من الحروف والأرقام كما يجب أن تحتوي\n"
-"على 8 حروف على الأقل. لا تكتب كلمة مرور \"الجذر\" على ورق -- هذا يسهّل\n"
-"اختراق النظام إذا رأى أحد كلمة المرور.\n"
-"\n"
-"نصيحة أخرى -- لا تجعل كلمة المرور طويلة جداً أو معقّدة لأنك يجب أن تكون\n"
-"قادراً على تذكرها!\n"
-"\n"
-"لن يتم عرض كلمة المرور على الشاشة عند كتابتها. لتقليل فرصة حدوث\n"
-"خطأ أثناء الكتابة، ستحتاج إلى إدخال كلمة المرور مرتين.\n"
-"إذا أخطأت في الكتابة في المرتين، فسيجب استخدام كلمة\n"
-"المرور \"الخاطئة\" في المرة الأولى التي ستحاول فيها الاتصال كمستخدم \"جذر"
-"\".\n"
-"\n"
-"إذا أردت أن يكون الوصول إلى هذا الحاسب يتحكّم به\n"
-"خادم مواثقة، اضغط \"%s\".\n"
-"\n"
-"إذا كانت شبكتك تستخدم LDAP، أوNIS، أو خدمات PDC مواثقة نطاق ويندوز، اختر "
-"الخيار المناسب لـ\"%s\". إن لم تعرف أيّها تريد\n"
-"استخدامه، اسأل مدير الشبكة لديك.\n"
-"\n"
-"إذا كانت لديك مشكلة في تذكر كلمات المرور، يمكنك اختيار\n"
-"\"%s\" إذا لم يكن الحاسب الخاص بك متصلاً بالإنترنت،\n"
-"أو أنك تثق في جميع من يستخدمون حاسبك."
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "المواثقة"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"محمّل الإقلاع هو برنامج بسيط يشغلّه حاسبك وقت الإقلاع.\n"
-"وهو المسؤول عن بدء تشغيل النظام بأكمله. عادة، يكون\n"
-"تثبيت محمّل الإقلاع آلياً بالكامل. سيقوم DrakX بتحليل قطاع التركيب الخاص "
-"بالقرص\n"
-"ويتصرف بحسب ما يجد هناك:\n"
-"\n"
-" * إن عثر على قطاع تحميل ويندوز، فسيقوم باستبداله بقطاع تحميل LILO/GRUB.\n"
-"بهذه الطريقة ستستطيع تحميل جنو/لينكس أو أيّ\n"
-"نظام تشغيل آخر على ماكينتك.\n"
-"\n"
-" * إذا تم العثور على قطاع تحميل LILO أو GRUB، سيتم استبداله بقطاع جديد.\n"
-"\n"
-"إن لم يستطع DrakX أن يقرر مكان وضع قطاع الإقلاع، فسيسألك\n"
-"عن المكان الأكثر أماناً لوضعه فيه. عامة، \"%s\" هو الأكثر أماناً.\n"
-"اختيار \"%s\" لن يقوم بتثبيت أيّ محمّل إقلاع. اسخدم هذا الخيار فقط\n"
-"إن كنت تعرف ماذا تفعل."
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"الآن، حان وقت اختيار نظام الطباعة لحاسبك. قد توفّر أنظمة التشغيل الأخرى\n"
-"نظام طباعة واحد، لكن ماندريبا لينكس يوفر لك نظامين. كل نظام مناسب\n"
-"لنوع معين من التهيئة.\n"
-"\n"
-" * \"%s\" -- وهو اختصار لـ``اطبع و لا تصفّ''، هو الخيار الأمثل\n"
-"إذا كانت لديك وصلة مباشرة بالطابعة، و تريد أن تكون قادراً على\n"
-"تفادي أي ارتباك في الطابعة، وليس لديك طابعات شبكيّة.(يقوم \"%s\"\n"
-"بالتعامل مع حالات الشبكة البسيطة ويعيبه البطء عند الاستخدام\n"
-"مع الشبكات). من الأفضل أن تستخدم \"pdq\" إذا.\n"
-"كانت هذه تجربتك الأولى مع جنو/لينكس.\n"
-"\n"
-" * \"%s\" - ``نظام طباعة يونكس الشّائع CUPS''، هو الخيار الأمثل\n"
-"للطباعة على طابعتك المحلية أو حتى على طابعة في النصف الآخر من الكوكب. إنه\n"
-"سهل الإعداد و يمكن أن يتصرف كخادم أو كعميل لأنظمة طباعة \"lpd\"\n"
-"القديمة، لذا فإنه متوافق مع أنظمة التشغيل القديمة\n"
-"التي لا تزال تحتاج إلى خدمات الطباعة. بينما التهيئة سهلة\n"
-"و قوية مثل \"pdq\". إذا كنت تحتاج إلى محاكاة خادم \"lpd\"، تأكّد\n"
-"من تشغيل عفريت \"cups-lpd\".\n"
-"يحتوي \"%s\" على واجهات\n"
-"رسوميّة للطّباعة أو لتحديد خيارات الطّابعة\n"
-"ولإدارة الطابعة.\n"
-"\n"
-"إذا قررت اختيارك الآن، ثم لم يعجبك نظام الطباعة\n"
-"فيما بعد، يمكنك تغييره عن طريق تشغيل PrinterDrake من مركز تحكم ماندريبا "
-"لينكس\n"
-"و الضغط على زرّ \"%s\"."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "وضعية الخبير"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"سيقوم DrakX أولاً بالتحقق من أي أجهزة IDE مرتبطة بالحاسب. سيقوم\n"
-"أيضا بالتحقق من وجود بطاقات PCI SCSI على نظامك. إذا تم ايجاد\n"
-"بطاقة SCSI، سيقوم DrakX تلقائياً بتثبيت المُشغّل المناسب.\n"
-"\n"
-"لأن التحقق الآلي من العتاد غير خالي من الأخطاء، قد يتعذر\n"
-"على DrakX التحقق من أقراصك الصلبة. لذا سيكون عليك تحديد عتادك يدوياً.\n"
-"\n"
-"إذا اضطررت إلى تحديد موائم PCI SCSI يدوياً، سيسألك DrakX عمّا إذا\n"
-"كنت تريد تهيئة الخيارات الخاصة به. يجب أن تسمح لـ DrakX بأن\n"
-"يقوم بالتحقق الآلي من العتاد لكي يحدد الخيارات الخاصة بالبطاقة\n"
-"و التي يحتاج اليها لتشغيل الموائم. في أغلب الأحيان، سيتخطى DrakX\n"
-"هذه الخطوة بدون أي مشاكل.\n"
-"\n"
-"إذا تعذر على DrakX التحقق من الخيارات آلياً ستحتاج\n"
-"إلى تهيئة المُشغّل يدوياً."
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\": إذا تم اكتشاف بطاقة صوت على نظامك، سيتم عرضها\n"
-"هنا. إذا لاحظت أن بطاقة الصوت المعروضة هنا ليست تلك الموجودة\n"
-"فعلاً على نظامك، يمكنك الضغط على الزر و اختيار مشغل\n"
-"آخر."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "بطاقة الصوت"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"كمُراجعة، سيقدّم DrakX تلخيص المعلومات التي استجمعها حول\n"
-"نظامك. بناءً على عتادك المثبت، قد يكون لديك بعض أو كلّ\n"
-"المُدخلات التّالية. كل مُدخل مكوّن من عنصر التهيئة المطلوب\n"
-"تهيئته، متبوعاً بملخّص سريع من التّهيئة الحاليّة.\n"
-"اضغط على الزّر المرافق \"%s\" لتغييّر ذلك.\n"
-"\n"
-"* \"%s\": تحقّق من تهيئة خريطة لوحة المفاتيح الحاليّة وغيّرها إن كان\n"
-"ضروريّاً.\n"
-"\n"
-" * \"%s\": تحقّق من اختيار الدّولة الحالي. إن لم تكن في هذه\n"
-"الدّولة، اضغط على زرّ \"%s\" واختر دولة أخرى. إن لم تكن دولتك\n"
-"في القائمة المعروضة الأولى، اضغط على الزّر \"%s\" لتحصل على لائحة\n"
-"الدّول الكاملة.\n"
-"\n"
-" * \"%s\": بشكل افتراضي، يخفّض DrakX توقيتك الزّمني بناءً على الدّولة\n"
-"التي اخترتها. يمكنك الضّغط على الزّر \"%s\" هنا إن لم يكن ذلك\n"
-"صحيحاً.\n"
-"\n"
-" * \"%s\": تحقّق من تهيئة الماوس الحاليّة واضغط على الزّر كي\n"
-"تغيّرها إن كان ضروريّاً.\n"
-"\n"
-" * \"%s\": الضّغط على الزّر \"%s\" سيفتح\n"
-"معالج تهيئة الطّابعة. راجع الفصل المتعلّق من ``دليل\n"
-"المبتدئ'' للمزيد من المعلومات حول كيفيّة تهيئة طابعة جديدة. الواجهة\n"
-"المعروضة هناك مشابهة للتي هي مستخدمة خلال التّثبيت.\n"
-"\n"
-" * \"%s\": إن اكتشف بطاقة صوت في نظامك، سوف تُعرض\n"
-"هنا. إن لاحظت أنّ بطاقة الصّوت المعروضة ليست هي التّي\n"
-"فعليّاً موجودة في نظامك، يمكنك الضّغط على الزّر واختيار\n"
-"مشغّل آخر.\n"
-"\n"
-" * \"%s\": إن كانت لديك بطاقة تلفزيون على نظامك، يتمّ عرضها\n"
-"هنا وإن كانت لديك ولم تُكتشف،\n"
-"اضغط على \"%s\" تحاول تهيئتها يدوياً.\n"
-"\n"
-" * \"%s\": يمكنك الضغط على \"%s\" كي تُغيّر المُعطيات المرتبطة\n"
-"مع البطاقة إن شعرت بخطأ ما في التهيئة.\n"
-"\n"
-" * \"%s\": بشكل افتراضي، يهيّء DrakX واجهتك الرّسوميّة\n"
-"بدقّة \"800×600\" أو \"1024×768\". إن لم يناسبك ذلك، اضغط على\n"
-"\"%s\" كي تهيّء واجهتك الرّسوميّة.\n"
-"\n"
-"\n"
-" * \"%s\": إن رغبت بتهيئة الوصول إلى الإنترنت والشّبكة المحل، فيمكنك عمل ذلك "
-"الآن. راجع الكتيّبات المطبوعة أو\n"
-"استخدم مركز تحكّم ماندريبا لينكس بعض الانتهاء من التثبيت كي تستفيد\n"
-"من المساعدة المُدرجة بالكامل.\n"
-"\n"
-" * \"%s\": يمكنك من تهيئة عناوين بروكسي HTTP و FTP إن كانت الماكينة التي\n"
-"تقوم بالتثبيت عليها واقعة خلف خادم بروكسي.\n"
-"\n"
-" * \"%s\": هذا المُدخل يمكنّك من إعادة تعريف مستوى الأمن كما هو محدّد في\n"
-"الخطوة السّابقة ().\n"
-"\n"
-" * \"%s\": إن كنت تنوي وصل ماكينتك إلى الإنترنت، فإنّها لفكرة جيّدة\n"
-"أن تحمي نفسك من التّدخّلات الخارجيّة بإعداد جدار ناريّ. راجع\n"
-"الفصل المتعلّق من ``دليل المبتدئ'' لتفاصل\n"
-"إعدادات الجدار النّاري.\n"
-"\n"
-" * \"%s\": إن رغبت بتغيير تهيئة محمّل الإقلاع، اضغط ذلك\n"
-"الزّر. يجب أن يُحتفظ بهذا للمستخدمين المُتقدّم راجع الكتيبات المطبوعة أو "
-"المساعدة المضمنة حول تهيئة محمل الإقلاع من خلال\n"
-"مركز تحكم ماندريبا لينكس.\n"
-"\n"
-" * \"%s\": سيمكنك هذا من ضبط التّحكّم بالخدمات التي سوف تشغّل\n"
-"على ماكينتك. إن نويت استخدام هذه الماكنية كخادم فإنّها لفكرة جيّدة\n"
-"أن تُراجع هذه الخطوة."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "المنطقة الزمنية"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "بطاقة التلفاز"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "بطاقة ISDN"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "الواجهة الرسومية"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "الشبكة"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "البروكسيات"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "مستوى الأمن"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "جدار ناري"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "محمّل الإقلاع"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "الخدمات"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"اختر القرص الصلب الذي تريد محوه لتثبيت تجزيء\n"
-"ماندريبا لينكس الجديدة. خذ حذرك، كل البيانات الموجود عليه ستضيع\n"
-"و لن يمكن استعادتها!"
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"اضغط \"%s\" إن كنت تريد حذف كل التجزيئات الموجودة على القرص\n"
-"الصلب. خذ حذرك، بعد ضغطك لزر \"%s\" لن تتمكن من استعادة\n"
-"أي بيانات أو تجزئات كانت موجودة على هذا القرص الصلب، بما في ذلك\n"
-"أي بيانات ويندوز.\n"
-"\n"
-"اضغط \"%s\" لإيقاف هذه العملية دون خسارة أي بيانات أو تجزيئات\n"
-"موجودة على القرص الصلب."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "التالي ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- السابق "
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"تعذر الوصول إلى وحدات النواة الخاصة بنواة النظام (الملف %s مفقود)، بشكل عام "
-"يعني هذا أن قرص الإقلاع المرن ليس محدّثاً مع وسيط التثبيت (فضلاً قم بإنشاء قرص "
-"اقلاع جديد)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "عليك أيضا تنسيق %s"
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr "هل لديك أوساط إضافيّة أخرى؟"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-"تم العثور على أوساط التثبيت التالية وسيتم استخدامها خلال التثبيت: %s\n"
-"\n"
-"\n"
-"هل لديك أوساط تثبيت إضافية لتهيئها؟"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "القرص المدمج"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "الشبكة (http)"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "الشبكة (ftp)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "أدخل القرص المدمج 1 مجدّدا"
-
-#
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "لم يُعثر على أي جهاز"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "أدخل القرص المدمج"
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "تعذّر تجهيز القرص المدمج"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "عنوان URL للمرآة؟"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "لم يمكن العثور على ملف hdlist على هذه المرآة. تأكد من صحة الموقع."
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"تغيير القرص المدمج !\n"
-"من فضلك أدخل القرص المدمج المسّمى \"%s\" في السواقة واضغط على موافق عندما "
-"تنتهي."
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr "جاري النسخ"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"لقد اخترت الخادمات التالية: %s\n"
-"\n"
-"\n"
-"هذه الخادمات مُنشّطة افتراضياً، و لا يوجد لهم مشاكل أمنية\n"
-"معروفة، و لكن قد تكتشف بعض المشاكل الجديدة. في هذه الحالة، تأكد من أن\n"
-"تقوم بالترقية في أقرب وقت ممكن.\n"
-"\n"
-"\n"
-"هل أنت متأكد أنك تريد تثبيت هذه الخادمات الآن؟\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"سيتم حذف هذه الحزم لكي تتم ترقية النظام: %s\n"
-"\n"
-"\n"
-"هل تريد حذف هذه الحزم فعلاً؟\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "خطأ في قراءة الملف %s"
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "تمّ تغيير أسماء القرص التّالي أو الأقراص التّالية:"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr "%s (المسمّى %s سابقاً)"
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"لقد ظهر خطأ - لم يعثر على أجهزة صالحة يمكن إنشاء أنظمة ملفات جديدة عليها. "
-"تأكد من العتاد الخاص بك لمعرفة سبب هذه المشكلة"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr "الرجاء اختيار وسط"
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr "الوسط %s سيء"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "الملف موجود مسبقاً. هل تريد الكتابة عليه؟"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "لا يمكنني عمل لقطات للشاشة قبل التجزئة"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "ستكون لقطات الشاشة موجودة بعد التثبيت في %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "تثبيت النظام"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "تهيئة النظام"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"بعض العتاد الموجود على جهازك يحتاج إلى مشغلات ``تجارية'' كي تعمل.\n"
-"يمكنك ايجاد مزيد من المعلومات عنها في: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"يجب أن تكون لديك تجزيء جذرية.\n"
-"لهذا الغرض انشئ تجزيء (أو اضغط على تجزيء موجودة).\n"
-"ثم اختر ``مكان التركيب'' و اجعله `/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"ليست لديك تجزيء تبديل.\n"
-"\n"
-"هل تريد المتابعة على أي حال؟"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "لديك تجزيء FAT تم تحميلها على /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "لا توجد مساحة فارغة لعمل التجزيئات الجديدة"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "استخدم التجزيئات الموجودة"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "لا يوجد تجزيء لاستخدامه"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "استخدم تجزيء ويندوز كـloopback"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "أي تجزيء تريد استخدامه من أجل Linux4Win"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "اختيار الأحجام"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "حجم التجزيء الجذري بالميغابايت:"
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "حجم تجزيء التبديل بالميغابايت:"
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "لا يوجد تجزيء FAT لاستخدامه كـloopback )أو لا توجد مساحة كافية متبقية)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "أي تجزيء تريد تغيير حجمه؟"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"لم تتمكن أداة تغيير حجم FAT من التعامل مع تجزيئك، \n"
-"ظهر الخطأ التالي: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "جاري حساب مساحة تجزيء ويندوز"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"تجزيء ويندوز الخاصّ بك كثير التجزّئات. رجاء أعد تشغيل جهازك إلى ويندوز، شغّل "
-"أداة ``defrag''، ثمّ أعد بدْء تثبيت ماندريبا لينكس."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"تحذير!\n"
-"\n"
-"DrakX سيقوم الآن بتغيير حجم تجزيء ويندوز. كن حذراً:\n"
-"هذه العملية خطرة. فإذا لم تكن فعلت ذلك،\n"
-"يجب عليك أولاً الخروج من التثبيت، ثم تشغيل \"scandisk c:\"\n"
-" من\n"
-"سطر الأوامر في ويندوز (احذر، تشغيل البرنامج الرّسومي\n"
-"\"scandisk\" غير كافي، تأكّد من استخدام \"chkdsk\" في\n"
-"سطر الأوامر!)، اختياريّاً شغّل defrag، ثمّ أعد بدء\n"
-"التثبيت. يجب عليك كذلك عمل نسخة احتياطية من بياناتك.\n"
-"عندما تكون متأكداً، اضغط موافق."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "ما حجم المساحة التي تريد إبقائها لويندوز على"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "التجزيء %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "تغيير حجم تجزيء ويندوز"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "فشل تغيير حجم FAT: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "لا توجد تجزيء FAT قابل لتغيير حجمها (أو لا توجد مساحة كافية متبقية)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "حذف ويندوز(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "لديك أكثر من قرص صلب، في أيهم تريد تثبيت لينكس؟"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "كل التجزيئات و بياناتها ستضيع من على السواقة %s"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "استخدام fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"يمكنك الآن تجزئة %s.\n"
-"عندما تنتهي لا تنس الحفظ باستخدام `w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "لا يمكنني العثور على مساحة فارغة للتثبيت"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "عثر معالج التجزئة في DrakX على الحلول التالية:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "فشلت التجزئة: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "جاري تشغيل الشبكة"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "جاري اغلاق الشبكة"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"مقدّمة\n"
-"\n"
-"سيشار إلى نظام التّشغيل ومختلف المكوّنات المتوفّرة في توزيعة ماندريبا لينكس \n"
-" بـ \"المنتجات البرمجيّة\" من هنا وفيما يلي. المنتجات البرمجيّة تحتوي ولكنّها "
-"لا تنحصر في مجموعة البرامج والمناهج والقواعد والوثائق المتعلّقة بنظام "
-"التّشغيل \n"
-"والمكوّنات المختلفة لتوزيعة ماندريبا لينكس.\n"
-"\n"
-"\n"
-"1. اتّفاقيّة التّرخيص\n"
-"\n"
-"يرجى قراءة هذه الوثيقة بتمعّن. هذه الوثيقة هي اتّفاقيّة ترخيص بينك أنت "
-"وماندريبا ش.م. وتطبّق على المنتجات البرمجيّة.\n"
-"تثبيتك أو نسخك أواستعمالك لهذه البرامج بأي شكلٍ من الأشكال يعدّ \n"
-"قبولاً صريحاً وموافقةً كاملةً على الالتزام ببنود وشروط هذه الرّخصة. \n"
-"إن كنت لا توافق على أي جزءٍ من الرّخصة فلا يسمح لك بتثبيت أو نسخ أو استعمال "
-"المنتجات البرمجيّة. أي محاولةٍ لتثبيت أو نسخ أو استعمال المنتجات البرمجيّة بشكلٍ "
-"لا يمتثل \n"
-"لبنود وشروط هذه الرّخصة هي لاغيةٌ وستنهي حقوقك بموجب هذه الرّخصة. \n"
-"بمجرّد انتهاء هذه الرّخصة يتوجّب عليك وعلى الفور محق كافّة النّسخ \n"
-"من المنتجات البرمجيّة.\n"
-"\n"
-"\n"
-"2. محدوديّة الضّمان\n"
-"\n"
-"توفّر المنتجات البرمجيّة والوثائق المرفقة \"كما هي\"، دون أيّ ضمان، ضمن أقصى \n"
-"حدٍّ يسمح به القانون.\n"
-"ماندريبا ش.م. لن تكون مسؤولةً قانونيّاً مهما كانت الظّروف عن أيّة \n"
-"أضرارٍ خاصّةٍ أو عرضيّة أو مباشرةٍ أو غير مباشرة (شاملةً ولكن غير محصورةٍ بأيّة "
-"أضرارٍ ناجمةٍ عن خسارةٍ \n"
-"في الأعمال أو عن انقطاعٍ للأعمال أو عن خسارةٍ ماليّة أو عن رسومٍ قانونيّة أو عن "
-"أيّة عقوباتٍ نتيجة \n"
-"أحكامٍ قضائيّة، أو عن أيّة خسارةٍ أخرى تنجم) نتيجة استعمال أو عدم القدرة على "
-"استعمال المنتجات البرمجيّة حتّى وإن كانت ماندريبا ش.م. على درايةٍ باحتمال وقوع "
-"أضرارٍ \n"
-"كتلك المذكورة.\n"
-"\n"
-"محدوديّة المسؤوليّة المتعلّقة بامتلاك أو استعمال البرمجيّات المحظورة في بعض "
-"الدّول\n"
-"\n"
-"ضمن أقصى حدّ يسمح به القانون لن تكون ماندريبا ش.م. مسؤولةً أو أيٍّ من موزّعيها "
-"مسؤولين قانونيّاً \n"
-"عن أيّة أضرارٍ خاصّةٍ أو عرضيّة أو مباشرةٍ أو غير مباشرة (شاملةً ولكن غير محصورةٍ "
-"بأيّة أضرارٍ ناجمةٍ عن خسارةٍ \n"
-"في الأعمال أو عن انقطاعٍ للأعمال أو عن خسارةٍ ماليّة أو عن رسومٍ قانونيّة أو عن "
-"أيّة عقوباتٍ نتيجة \n"
-"أحكامٍ قضائيّة، أو عن أيّة خسارةٍ أخرى تنجم) ناتجةٍ عن \n"
-"امتلاك أو استعمال مكوّناتٍ برمجيّة أو ناتجةٍ عن تنزيل مكوّناتٍ \n"
-"برمجيّة من أحد مواقع ماندريبا لينكس و كانت تلك المكوّنات البرمجيّة محظورة أو "
-"محدودةً في بعض الدّول بقوانين محلّيّة.\n"
-"محدوديّة المسؤوليّة هذه تنطبق على مكوّنات التّشفير المنيع \n"
-"المرفقة مع المنتجات البرمجيّة ولكن لا تنحصر بها.\n"
-"\n"
-"\n"
-"3. رخصة GPL والرّخص ذات الصّلة\n"
-"\n"
-"المكوّنات البرمجيّة تتألّف من مكوّناتٍ منشأةٍ من قبل عدّة أشخاصٍ أو جهات. في "
-"معظمها \n"
-"هذه المكوّنات خاضعةٌ لبنود وشروط \n"
-"رخصة جنو العامّة، المشار إليها بـ\"GPL\" من هنا وفيما يلي، أو لبنود وشروط رخصٍ "
-"شبيهة. معظم هذه الرّخص تخوّلك أن تستعمل \n"
-"أو تنسخ أو تكيّف أو تعيد توزيع المكوّنات الخاضعة لها. يرجى قراءة بنود وشروط \n"
-"اتّفاقيّة ترخيص كل مكوّن قبل استعمال أي مكوّن. أيّة أسئلة \n"
-"عن رخصة أي مكوّن يجب أن تطرح على مؤلّف المكوّن وليس على ماندريبا.\n"
-"البرامج المطوّرة من قبل ماندريبا ش.م. خاضعة لرخصة GPL. الوثائق المكتوبة من "
-"قبل \n"
-"ماندريبا ش.م. تخضع لرخصةٍ محدّدة. يرجى الرّجوع للوثائق لمزيدٍ \n"
-"من التّفاصيل.\n"
-"\n"
-"\n"
-"4. حقوق الملكيّة الفكريّة\n"
-"\n"
-"كل الحقوق في مكوّنات المنتجات البرمجيّة هي لمؤلّفيها المعنيّين وتحميها \n"
-"قوانين الملكيّة الفكريّة وحقوق النّشر المنطبقة على البرمجيّات.\n"
-"تحتفظ ماندريبا ش.م. بحقّها في تعديل أو تكييف المنتجات البرمجيّة، بحذافيرها \n"
-"أو أجزاء معيّنة منها، بشتّى الطّرق ولسائر الأغراض.\n"
-"\"Mandriva\" و \"Mandriva Linux\" والشّعارات المتعلّقة هي علاماتٌ تجاريّة "
-"لماندريبا ش.م. \n"
-"\n"
-"\n"
-"5. القوانين الحاكمة \n"
-"\n"
-"في حال تجميد أي جزءٍ من هذه الاتّفاقيّة أو اعتباره غير قانونيٍّ أو غير منطبق بحكمٍ "
-"قضائي فإن ذلا  الجز يعدء \n"
-"مستثناً من هذا العقد.س تبقى أنت مقيّداً بالأجزاء الأخرى المنطبقة \n"
-"من هذه الاتّفاقيّة.\n"
-"إن بنود وشروط هذه الرّخصة هي خاضعة لقوانين فرنسا.\n"
-"سيفضّل أن تسوّى كافّة الاختصامات المتعلّقة ببنود هذه الرّخصة خارج حكم القضاء. كحلٍّ "
-"أخير \n"
-"سيحوّل الاختصام إلى محاكم القضاء ذات العلاقة في باريس - فرنسا.\n"
-"في حال وجود أي أسئلةٍ عن هذه الوثيقة، يرجى الاتّصال بماندريبا ش.م. \n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"تحذير: البرامج الحرّة ليس من الضّروري أن تكون خالية من براءة الاختراع، وبعد "
-"البرامج الحرّة\n"
-"المشمولة قد تكون محميّة ببراءة اختراع مسجّلة في بلدك. مثلاً، MP3 decoders "
-"المشمولة قد تتطلّب رخصة لاستخدامها )انظر\n"
-"http://www.mp3licensing.com للمزيد من التّفاصيل(. إن لم تكن متأكّداً إن كانت \n"
-"براءة الاختراع\n"
-"قد تنطبق عليك، تحقّق من القوانين المحليّة لبلدك."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"تحذير\n"
-"\n"
-"فضلاً اقرأ الشروط أدناه. إذا كنت لا توافق على أي\n"
-"جزء، لن يسمح لك بتثبيت وسيط القرص المدمج التالي. اضغط 'رفض' \n"
-"لمتابعة التثبيت بدون هذه الوسائط.\n"
-"\n"
-"\n"
-"بعض المكونات الموجودة في وسيط القرص المدمج التالي غير محكومة\n"
-"بموجب ترخبص GPL أو الاتفاقيات المماثلة. كل مكون من تلك محكوم\n"
-"بموجب بنود و شروط الترخيص الخاص به تحديداً. \n"
-"فضلاً اقرأ باهتمام و أن تستجيب لهذه التراخيص قبل أن \n"
-"تستخدم أو تعيد توزيع هذه المكونات. \n"
-"مثل هذه التراخيص بشكل عام قد تمنع نقل أو  نسخ (باستثناء النسخ الاحتياطي)\n"
-"أو إعادة توزيع أو ممارسة الهندسة العكسية أو فك تركيب أو فك تجميع أو تعديل\n"
-"المكون.\n"
-"أي انتهاك للاتفاقية سيتسبب في انهاء حقوقك تحت الترخيص\n"
-"المحدد بشكل فوري. الا إذا كان الترخيص يعطيك مثل هذه الحقوق.\n"
-"عادة لا يسمح لك بتثبيت هذه البرامج على أكثر من نظام واحد\n"
-"أو تعديله لكي يتم استخدامه على شبكة. في حال شكك فضلاً \n"
-"اتصل بشكل مباشر مع موزع أو مؤلف هذا المكون.\n"
-"النقل إلى طرف ثالث أو نسخ هذه المكونات بما فيه \n"
-"وثائق المساعدة ممنوع عادةً.\n"
-"\n"
-"\n"
-"جميع الحقوق الخاصة بالمكونات الموجودة في وسيط القرص \n"
-"المدمج التالي مملوكة لأصحابها و محمية بموجب قوانين الملكية \n"
-"الفكرية المنطبقة على البرمجيات.\n"
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"تهانينا، التثبيت قد انتهى.\n"
-"أزل وسيط الإقلاع و اضغط زر الإدخال لإعادة التشغيل.\n"
-"\n"
-"\n"
-"لمعلومات حول الإصلاحات المتوفرة لهذا الإصدار من ماندريبا لينكس،\n"
-"استشر صفحة تصحيح الأخطاء المتوفرة من:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"المعلومات حول تهيئة النظام متوفرة في فصل\n"
-"ما بعد التثبيت في دليل مستخدم ماندريبا الرسمي."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "نقطة تركيب مكررّة %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"لم يتمّ تثبيت بعض الحزم المهمّة بشكل صحيح.\n"
-"إمّا أن يكون قارئ الأقراص معطوبا أو القرص.\n"
-"إفحص القرص المدمج على حاسب مثبت باستعمال \"rpm -qpl media/main/*.rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "الانتقال للخطوة `%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "اختيار مجموعات الحزم"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "الحجم الإجمالي: %d / %d م.ب."
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "حزمة سيئة"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "النسخة:"
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "الحجم: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d ك.ب.\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "الأهمية:"
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "لا يمكنك اختيار/ازالة اختيار هذه الحزمة"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "بسبب غياب %s"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "بسبب عدم إرضاء %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "السعي إلى ترويج %s"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "من أجل حفظ %s"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr "لا يمكنك اختيار هذه الحزمة لأنه لا يوجد مساحة كافية متبقية لتثبيتها"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "سيتم تثبيت الحزم التالية"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "سيتم حذف الحزم التالية"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "هذه الحزمة الزامية، لا يمكن عدم اختيارها"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "لا يمكن إزالة اختيار هذه الحزم. انها مثبتة مسبقاً"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"يجب ترقية هذه الحزمة.\n"
-"هل أنت متأكد أنك لا تريد اختيارها؟"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "لا يمكنك إزالة اختيار هذه الحزمة. يجب ترقيتها"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "إظهار الحزم المختارة ألياً"
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "تحميل/حفظ الاختيار"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "تحديث اختيار الحزم"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "تثبيت مصغّر"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "اختر الحزم التي تريد تثبيتها"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "التثبيت"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "الحساب التقريبي"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "لا تفاصيل"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "الوقت المتبقي"
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "الرجاء الانتظار، التحضير للتثبيت..."
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d حزم"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "جاري تثبيت الحزمة %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "رفض"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"غيّر القرص المدمج !\n"
-"من فضلك  أدخل القرص المدمج المسّمى \"%s\" في الّسواقة واضغط على موافق عندما "
-"تنتهي.\n"
-"إن لم يكن القرص لديك، اضغط على إلغاء لتجّنب التثبيت من هذا القرص المدمج."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "كان هناك خطأ في ترتيب الحزم:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "هل تريد المتابعة على أي حال؟"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "كان هناك خطأ في تثبيت الحزم:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "غير مهيّأ"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-"تم العثور على وسط التثبيت التالي.\n"
-"إن كنت تريد تخطي بعضها، يمكنك إزالة اختيارها الآن."
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-"لديك الخيار بنسخ محتويات الأقراص المدمجة إلى قرصك الصلب قبل التثبيت.\n"
-"سيكمل التثبيت بعد ذلك من القرص الصلب وستبقى الحزم متوفرة حالما يتم تثبيت "
-"النظام بالكامل."
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr "نسخ الأقراص بالكامل"
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "اتفاقية الترخيص"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr "ملاحظات الإصدار"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "الرجاء اختيار لوحة المفاتيح."
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "هذه هي القائمة الكاملة لكلّ لوحات المفاتيح المتوفّرة"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "تثبيت/ترقية"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "هل هذا تثبيت أم ترقية؟"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "ترقية %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "مفتاح التشفير لـ %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "الرجاء اختيار نوع الماوس."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "منفذ الماوس"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "الرجاء اختيار المنفذ التسلسلي الموصلة به الماوس"
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "محاكاة الأزرار"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "محاكاة الزر 2"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "محاكاة الزر 3"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "جاري تهيئة بطاقات PCMCIA..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "جاري تهيئة IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "لا يوجد تجزيء"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "جاري عمل مسح للتجزئات لإيجاد أماكن التركيب"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "اختيار أماكن التركيب"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"ليس هناك مساحة حرّة لواحد ميجابات من bootstrap! سوف يستمرّ التّثبيت، لكن لإقلاع "
-"نظامك، سوف تحتاج لإنشاء تجزيء bootstrap في DiskDrake"
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"تحتاج إلى إنشاء PPC PReP Boot bootstrap! ستكمل عملية التثبيت، ولكن لإقلاع "
-"نظامك، أنت بحاجة إلى إنشاء تجزيء bootstrap من خلال DiskDrake"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "اختيار التجزيئات التي تريد تنسيقها"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "تحقق من الكتل السيئة؟"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"تعذر التأكد من صحة نظام المفات %s. هل تريد تصحيح الأخطاء (كن حذراً، يمكن أن "
-"تخسر بيانات)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "لا توجد مساحة تبديل كافية للقيام بالتثبيت، الرجاء زيادة مساحة التبديل"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "البحث عن الحزم المتوفرة وإعادة بناء قاعدة بيانات rpm..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "العثور على الحزم المتوفرة..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "التعرف على الحزم المثبتة مسبقاً..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "البحث عن الحزم التي ستتم ترقيتها..."
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "اختيار مرآة سيتم من خلالها تنزيل الحزم"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "لا يوجد في نظامك مساحة متبقة تكفي للتثبيت أو الترقية (%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"الرجاء اختيار حفظ أو تحميل اختياراتك للحزم.\n"
-"النسق مشابه لملفات التثبيت الآلي المولّدة."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "تحميل"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "حفظ"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "ملف سيء"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "الحجم المختار أكبر من المساحة المتوفرة"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "نوع التثبيت"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"لم تختر أي مجموعة من الحزم.\n"
-"الرجاء اختيار التثبيت المصغر الذي تريده:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "مع وثائق المساعدة الأساسية (مفضّل)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "تثبيت مصغّر فعلاً (خصوصاً بدون urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "الكل"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"إذا كانت لديك قل الأقراص في القائمة أدناه، اضغط موافق.\n"
-"إذا لم تمكن لديك أي من هذه الأقراص، اضغط إلغاء.\n"
-"إذا كانت بعض هذه الأقراص مفقودة، قم بإزالة اختيارها ثم اضغط موافق."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "القرص المدمج المسمى \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "التحضير للتثبيت"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"تثبيت الحزمة %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "تهيئة ما بعد التثبيت"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"تستطيع الآن تنزيل الحزم المحدّثة. هذه الحزم\n"
-"تم تحديثها بعد اصدار التوزيعة. قد\n"
-"تحتوي على اصلاحات أمنية أو اصلاحات لعيوب برمجية.\n"
-"\n"
-"لتنزيل هذه الحزم، تحتاج إلى أن تكون لديك اتصال \n"
-"بالإنترنت.\n"
-"\n"
-"هل تريد تنزيل هذه التحديثات ؟"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "جاري الإتصال بالمرآة للحصول على قائمة بالحزم المتوفرة..."
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "تعذر الإتصال بالمرآة %s"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "هل تريد المحاولة مرةً أخرى؟"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "ما هي منطقتك الزمنية؟"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "تزامن وقت آلي (باستخدام NTP)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "خادم NTP"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "ملخص"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "النظام"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "العتاد"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "خادم CUPS بعيد"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "لا طابعة"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "هل لديك بطاقة صوت ISA؟"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"شغّل \"alsaconf\" أو \"sndconfig\" بعد التّثبيت لتهيئة بطاقة الصّوت الخاصّة بك"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "لم يعثر على بطاقة الصوت. حاول تشغيل \"harddrake\" بعد التثبيت"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "الواجهة الرسومية"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "الشبكة والإنترنت"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "مُهيّء"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "الأمن"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "مُنشّط"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "مُعطّل"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "الإقلاع"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s على %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "الخدمات: %d منشّطة لـ %d مسجلة"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "لم تقم بتهيئة خادم X. هل أنت متأكد أنك تريد ذلك؟"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "جاري تحضير محمّل الإقلاع..."
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"يبدو أن لديك ماكينة مجهولة أو من العالم القديم، ولن يعمل محمل الإقلاع yaboot "
-"مع نظامك. ستكمل عملية التثبيت، ولكنك بحاجة إلى استخدام BootX أو طريقة ما "
-"أخرى لإقلاع نظامك. مُعطى النواة لنظام الملفات الجذر هو: root=%s"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "هل تريد استخدام aboot؟"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"خطأ أثناء تثبيت aboot، \n"
-"حاول الإجبار على التثبيت حتى و لو أدي ذلك لتدمير التجزيء الأول؟"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"في هذا المستوى الأمني، الوصول إلى الملفّات بتجزيء ويندوز سيكون مقصوراً على "
-"المدير."
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "أدخل قرص مرن فارغ في السواقة %s"
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "الرجاء إدخال قرص مرن آخر لقرص المشغّلات"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "جاري إنشاء قرص التثبيت الآلي..."
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"بعض الخطوات لم يتم تكملتها.\n"
-"\n"
-"هل تريد الخروج الآن فعلاً؟"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "إنشاء قرص تثبيت آلي"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"التثبيت الآلي قد يتم بشكل تلقائي إذا أردت ذلك،\n"
-"في هذه الحالة سيستولي على كل القرص الصلب لديك!!\n"
-"(هذا بالنسبة للتثبيت على جهاز آخر).\n"
-"\n"
-"ربما تفضل إعادة عملية التثبيت.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> بين العناصر  | <Space> للاختيار | <F12> الشاشة التالية"
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "اختيار ملف"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "إضافة"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "تعديل"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "حذف"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "أساسي"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "انتهاء"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "تنفيذ"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "اختيار سيئ، حاول مرة أخرى\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "ما هو اختيارك؟ (الافتراضي %s) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"مُدخلات يجب تعبئتها:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "ما هو اختيارك؟ (0/1، افتراضي `%s') "
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "الزرّ `%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "هل تريد الضغط على هذا الزرّ؟"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "ما هو اختيارك؟ (الافتراضي `%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr " أدخل `void' للمُدخل الفارغ"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> هناك العديد من الأشياء للاختيار منها(%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"الرجاء اختيار الرقم الأول من 10 والذي تود تعديله،\n"
-"أو اضغط على زر الإدخال للاستمرار.\n"
-"ما هو اختيارك؟"
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> لاحظ، تغيرت التسمية:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "إعادة تسليم"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "التشيكية (QWERTZ("
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "الألمانية"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "الأسبانية"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "الفنلنديّة"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "الفرنسيّة"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "النرويجية"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "البولونيّة"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "الروسيّة"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "السويديّة"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "لوحة المفاتيح البريطانية"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "لوحة المفاتيح الأمريكية"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "الألبانيّة"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "الأرمنية (قديم)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "الأرمنية (آلة كاتبة)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "الأرمنية (صوتي)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "العربية"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "الأذربيجانية (لاتيني)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "البلجيكية"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "البنغالية (توزيعة Inscript("
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "البنغالية (Probhat("
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "البلغارية (صوتية)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "البلغارية (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "البرازيلية (ABNT-2("
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "البوسنيّة"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "البيلاروسية"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "السويسرية (توزيع ألماني)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "السويسرية (توزيع فرنسي)"
-
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "شيروكي مقطعي"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "تشيكيّة (QWERTY("
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "الألمانية (لا مفاتيح ميتة)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "ديفانغاري"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "الدانمركية"
-
-# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
-# it displays on screen as "(US) Dvorak", following the same schema
-# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
-# that way the entry is also listed together with the other "Dvorak" entries.
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (أمريكا("
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (إسبرانتو("
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (فرنسيّة("
-
-# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
-# it displays on screen as "(US) Dvorak", following the same schema
-# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
-# that way the entry is also listed together with the other "Dvorak" entries.
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (المملكة المتّحدة("
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (نرويجيةّ("
-
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (بولنديّة("
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (سويدية("
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "زونخا/تيبتيّة"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "الإستونية"
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "فارويّة"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "الجورجية (التوزيع \"الروسي\")"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "الجورجيةّ (التوزيع \"اللاتيني\")"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "اليونانيّة"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "يونانية (polytonic("
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "غوجاراتي"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "غورموكهي"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "الكرواتيّة"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "الهنغاريّة"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "الايرلندية"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "العبريّة"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "العبرية (صوتية)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "الفارسيّة"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "الآيسلاندية"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "الإيطاليّة"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "اينوكتيتوت"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "اليابانية 106 مفاتيح"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "كنّادا"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "الكوريّة"
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "كرديّة (بخطٍّ عربي)"
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "قيرغزيّة"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "الأمريكية اللاتينية"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "الليتوانيّة"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "الليتوانية AZERTY (قديم)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "الليتوانية AZERTY (جديد)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "الليتوانية \"صف رقمي\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "الليتوانية \"صوتي\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "لاتفيّة"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "المالايالام"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "المقدونية"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "ميانمار (البورمية)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "المنغولية (سيريلية)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "المالطية (بريطانيا)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "المالطية (أمريكا)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "الهولندية"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "أوريا"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "البولندية (توزيعة qwerty)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "البولندية (توزيعة qwertz)"
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "باشتويّة"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "البرتغالية"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "الكنديّة (كيبيك)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "الرومانية (qwertz("
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "الرومانية (qwertz("
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "الرّوسية (صوتية)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "سآمي (نرويجي)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "سآمي (سويدية/فنلندية)"
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "سنديّة"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "السلوفينية"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "السلوفاكية (QWERTZ("
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "السلوفاكية (QWERTY("
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "الصربية (سيريلي)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "السريانية"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "السريانية (صوتي)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "التيلوغو"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "التاميل (توزيع ISCII)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "التاميل (توزيع الآلة كاتبة)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "تايلنديّة (كدماني)"
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "تايلنديّة (TIS-820("
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "تايلنديّة (باتشوتي)"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "الطاجيك"
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "تركمانيّة"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "التّركية (طراز \"F\" التقليدي)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "التركية (طراز \"Q\" الحديث)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "الأكرانية"
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "لوحة المفاتيح الأردو"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "لوحة مفاتيح أمريكية (دولي)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "الأوزبكية (سيريلي)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "الفيتنامية \"صف رقمي\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "اليوغوسلافية (لاتيني)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "مفتاح Alt الأيمن"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "مفتاحيّ Shift معاً"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "مفاتيح Control و Shift معاً"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "مفتاح CapsLock"
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "مفاتيح Shift و CapsLock معاً"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "مفاتيح Ctrl و Alt معاً"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "مفاتيح Alt و Shift معاً"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "مفتاح \"Menu\""
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "مفتاح \"ويندوز\" الأيسر"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "مفتاح \"ويندوز\" الأيمن"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "مفتاحيّ Control معاً"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "مفتاحيّ Alt معاً"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "مفتاح Shift الأيسر"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "مفتاح Shift الأيمن"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "مفتاح Alt الأيسر"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "مفتاح Control الأيسر"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "مفتاح Control الأيمن"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"هنا يمكنك اختيار اختصارات لوحة المفاتيح التي \n"
-"ستسمح لك بالتبديل بين لغات لوحة المفاتيح المختلفة\n"
-"(مثلاً: لاتيني و غير لاتيني)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"هذا التّحديد سوف يُفعّل بعد التّثبيت.\n"
-"خلال التّثبيت، ستحتاج إلى استخدام زرّ التحكّم الأيمن\n"
-"للتبديل بين أنماط لوحة المفاتيح المتعدّدة."
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:RTL"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "أندورا"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "الإمارات العربية المتحدة"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "أفغانستان"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "أنتيغوا و باربودا"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "أنغويلا"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "ألبانيا"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "أرمينيا"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "أنتيل هولندا"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "أنغولا"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "القطب الجنوبي"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "الأرجنتين "
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "ساموا الأمريكية"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "أروبا"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "أذربيجان"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "البوسنة و الهرسك"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "باربادوس"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "بنغلاديش"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "بوركينافاسو"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "بلغاريا"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "البحرين"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "بوروندي"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "بنين"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "برمودا"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "سلطنة بروناي"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "بوليفيا"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "جزر الباهاما"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "بوتان"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "جزيرة بوفيه"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "بوتسوانا"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "روسيا البيضاء"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "بيليز"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "جزر الكوكوس"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "الكونغو كينشاسا"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "جمهورية وسط أفريقية"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "الكونغو برازافيل"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "كوت ديفوار"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "جزر الكوك"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "تشيلي"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "الكاميرون"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "الصين"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "كولومبيا"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "صربيا و الجبل الأسود"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "كوبا"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "كيب فيردي"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "جزر الكريسماس"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "قبرص"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "جيبوتي"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "دومينيكا"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "جمهورية الدومينيكان"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "الجزائر"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "الإكوادور"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "مصر"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "الصحراء الغربية"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "اريتريا"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "اثيوبيا"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "فيجي"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "جزر فوكلاند"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "ميكرونيزيا"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "جزر الفيرو"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "الغابون"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "المملكة المتحدة"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "عرينادا"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "جورجيا"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "غويانا الفرنسية"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "غانا"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "جبل طارق"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "غرينلاند"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "غامبيا"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "غينيا"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "غواديلوب"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "غينيا الإستوائية"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "جوجيا الجنوبية و جزر ساندويتش الجنوبية"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "غواتيمالا"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "غوام"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "غينيا-بيساو"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "غويانا"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "هونغ كونغ سار (الصين)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "جزر هيرد و ماكدونالد"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "هندوراس"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "كرواتيا"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "هايتي"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "اندونيسيا"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "الهند"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "منطقة جزر المحيط الهادي البريطانية"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "العراق"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "ايران"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "آيسلندا"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "جامايكا"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "الأردن"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "كينيا"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "قيرغيزستان"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "كمبوديا"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "كيريباتي"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "جزر القمر"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "سانت كيتس و نيفيس"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "كوريا الشمالية"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "كوريا"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "الكويت"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "جزر كايمان"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "كازاخستان"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "لاوس"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "لبنان"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "سانت لوسيا"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "ليشتنشتاين"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "سريلانكا"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "ليبريا"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "ليسوتو"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "ليتوانيا"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "لوكسمبورغ"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "لاتفيا"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "ليبيا"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "المغرب"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "موناكو"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "مولدوفا"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "مدغشقر"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "جزر مارشال"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "مقدونيا"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "مالي"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "ميانمار"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "منغوليا"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "جزر ماريانا الشمالية"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "مارتينيك"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "موريتانيا"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "مونتسيرات"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "مالطة"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "موريشيوس"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "جزر المالديف"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "مالاوي"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "المكسيك"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "ماليزيا"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "موزمبيق"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "ناميبيا"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "نيوكاليدونيا"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "النيجر"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "جزيرة نورفولك"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "نيجيريا"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "نيكاراغوا"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "نيبال"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "ناورو"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "نيوي"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "عمان"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "بنما"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "بيرو"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "بولينيسيا الفرنسية"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "بابوا غينيا الجديدة"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "الفيليبين"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "باكستان"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "سانت بيير و ميكيلون"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "بيتكايرن"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "بورتوريكو"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "فلسطين"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "البارجواي"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "بالاو"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "قطر"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "ريونيون"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "رومانيا"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "رواندا"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "السعودية"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "جزر سليمان"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "جزر سيشل"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "السودان"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "سنغافورة"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "سانت هيلانة"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "سلوفينيا"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "جزر سفالبارد و جان ماين"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "سيراليون"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "سان مارينو"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "السنغال"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "الصومال"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "سورينام"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "ساو تومي و البرينسيب"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "السلفادور"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "سورية"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "سوازيلاند"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "جزر الترك و الكايكوس"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "تشاد"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "مناطق جنوب فرنسا"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "توجو"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "طاجكستان"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "توكلاو"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "تيمور الشرقية"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "تركمانستان"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "تونس"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "تونجو"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "تركيا"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "ترينياد و توباجو"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "توفالو"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "تنزانيا"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "أوكرانيا"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "أوغندا"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "جزر الولايات المتحدة"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "أوروغواي"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "أوزبكستان"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "الفاتيكان"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "سانت فينسنت و الغرينادين"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "فينزويلا"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "الجزر العذراء (بريطانيا)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "الجزر العذراء (الولايات المتحدة)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "فييتنام"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "فاناتو"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "واليس و فوتونا"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "ساموا"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "اليمن"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "مايوت"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "زامبيا"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "زيمبابوي"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "عليك بتثبيت الحزم التالية: %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr "، "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "أهلا في %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "تركيبات حلقيّة %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "حذف الكتل المنطقية أولاً\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "مُعطيات"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "لاشيء"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "تهيئة الوحدة"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "يمكنك تهيئة كل معامل للوحدة هنا."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "عثر على %s واجهة"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "هل عندك واحدة أخرى؟"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "هل لديك أي واجهات %s؟"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "عرض معلومات العتاد"
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr "جاري تثبيت مشغل لمتحكّم USB"
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "جاري تثبيت مشغل لمتحكّم firewire %s"
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "جاري تثبيت مشغل لمتحكّم القرص الصّلب %s"
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "جاري تثبيت مشغل لمتحكّم إيثرنت %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "جاري تثبيت مشغل %s للبطاقة %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(الوحدة %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"يمكنك الآن إعطاء الخيارات للوحدة %s.\n"
-"لاحظ أن أي عنوان يجب إدخاله مسبوقاً بـ 0x مثل '0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"يمكنك الآن إعطاء الخيارات للوحدة %s.\n"
-"الخيارات في هيئة ``name=value name2=value2 ...'' \n"
-"مثلا، ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "خيارات الوحدة:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "أي مشغل %s يجب أن استخدمه؟"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"في بعض الأحيان يحتاج مشغل %s معلومات اضافية لكي يعمل\n"
-"بشكل صحيح، الا أنه يمكنه العمل جيدا بدونها. هل تريد تحديد\n"
-"خيارات اضافية له أو تسمح للمشغل بالتحقق في جهازك\n"
-"عن المعلومات التي سيحتاجها؟ في بعض الأحيان، قد يتسبب التحقق في تعليق الجهاز، "
-"لكن\n"
-"لا يجب أن يتسبب ذلك في أي مشاكل."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "جسّ آلي"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "حدد الخيارات"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"فشل تحميل الوحدة %s.\n"
-"هل تريد المحاولة ثانية بمعاملات أخرى؟"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "رقم"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d أرقام مفصولة بالفاصلة"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d حرفيات مفصولة بالفاصلة"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "أرقام مفصولة بالفاصلة"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "حرفيات مفصولة بالفاصلة"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "صن - ماوس"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "قياسي"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "ماوس PS2 شاملة ذات عجل"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "آلي"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "ماوس Kensington Thinking"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "ميكروسوفت Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "زر واحد"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "ماوس شاملة ذات زرّين"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "ماوس شاملة ذاث 3 أزرار مع مُحاكات العجل"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "عجل"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "توالي"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "ماوس شاملة ذات 3 أزرار"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "ميكروسوفت IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan مع محاكاة العجلة"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "أنظمة الماوس"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "سلسلات Logitech CC"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "سلسلات Logitech CC مع محاكاة العجلة"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "سلسلة MM"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial، old C7 type)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Mouse (توالي، نوع C7 القديم)"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "ماوس Kensington Thinking مع محاكاة العجلة"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "busmouse"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "زرّين"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 أزرار"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3 أزرار مع محاكاة العجلة"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "عالمي"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "أيّ ماوس PS/2 و USB"
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "ميكروسوفت Explorer"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "لاشئ"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "لا ماوس"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Synaptics Touchpad"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "من فضلك اختبر الماوس"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "لتنشيط الماوس،"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "حرك عجلة الماوس!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "استخدام PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "استخدام PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "استخدام DHCP"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel Speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - تم اكتشافه"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (باستخدام PPPOA) USB"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (مستعمل DHCP) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "وصّل إلى الإنترنت "
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"الطريقة الأكثر شيوعاً للإتصال بـ adsl هي pppoe.\n"
-"بعض الإتصالات تستخدم PPTP، و القليل تستخدم DHCP.\n"
-"إذا لم تكن تعلم، اختر 'استخدم PPPoE'"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "نوع وصلة ADSL:"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "خادم الوب"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "خادم اسم النطاق"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "خادم SSH"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "خادم FTP"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "خادم بريد"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "خادم POP و IMAP"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "خادم Telnet"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr "مشاركة ملفّات ويندوز (SMB)"
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "خادم CUPS"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "طلب الصّدى (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "BitTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"أداة تهيئة drakfirewall\n"
-"\n"
-"هذه الأداة تسمح لك بتهيئة جدار ناري شخصي لنظام ماندريبا لينكس هذا.\n"
-"إذا كنت تريد جدارا ناريا متخصّصاً وفعّالاً، ألق نظرة على\n"
-"توزيعة Mandriva Security Firewall المُتخصّصة."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"أداة تهيئة DrakFirewall\n"
-"\n"
-"تأكد من أنك قمت بتهيئة اتصالك بالشبكة/الإنترنت باستخدام\n"
-"drakconnect قبل المتابعة."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "أي خدمة تريد السماح للإنترنت أن تتصل بها؟"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"يمكنك إدخال منافذ متنوعة. \n"
-"أمثلة صالحة هي:139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"ألق نظرة على /etc/services لمزيد من المعلومات."
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"تم إعطاء منفذ غير صالح: %s.\n"
-"النسق الصحيح هو \"port/tcp\" أو \"port/udp\"، \n"
-"حيث يكون المنفذ بين 1 و65535.\n"
-"\n"
-"يمكنك أيضاَ إعطاء مدى من المنافذ (مثلاً: 2400:24350/udp)"
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "كل شئ (لا جدار ناري)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "منافذ أخرى"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "غير مُسرد - عدّل يدويّاً"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "لا أعرف "
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "يدوي"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr "الرجاء اختيار مشغّل ويندوز (ملف .inf)"
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "اختيار يدوي"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "بطاقة ISDN داخلية"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "تهيئة يدوية"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "IP آلي (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "IP آلي (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "بروتوكول لبقية العالم"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "البروتوكول الأوروبي (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"بروتوكول لبقية العالم\n"
-"لا D-Channel (خطوط مؤجرة)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "مودم Alcatel speedtouch USB"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "مودم Sagem USB"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "مودم Bewan"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "مودم ECI Hi-Focus"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "بروتوكول تهيئة المضيف الديناميكيّة (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "تهيئة TCP/IP يدويّة"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "بروتوكول النفق من نقطة إلى نقطة (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP عبر Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP عبر ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr "DSL عبر CAPI"
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Bridged Ethernet LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Bridged Ethernet VC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "Routed IP LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "Routed IP VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "مبني على نص برمجي"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "مبني على محطة طرفيّة"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "تهيئة الشّبكة والإنترنت"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(اكتشاف على المنفذ %s)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(اكتشف %s)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(تم اكتشافه)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "وصلة LAN"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "اتّصال لاسلكي"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "وصلة ADSL"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "وصلة كيبل"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "وصلة ISDN"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "وصلة المودم"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "اختر الوصلة التي تريد تهيئتها"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"سوف نقوم الآن بتهيئة الاتّصال %s\n"
-"\n"
-"\n"
-"اضغط \"%s\" لتستمرّ."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "تهيئة الاتصال"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "فضلاً املأ أو أشّر على الحقل أدناه"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ للبطاقة"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "ذاكرة البطاقة (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "IO للبطاقة"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 للبطاقة"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 للبطاقة"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "رقم هاتفك الشخصي"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "اسم المزوّد (مثلاً provider.net("
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "رقم هاتف المزوّد"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "مُزوّد DNS 1 (اختياري)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "مُزوّد Provider DNS 2 (اختياري)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "وضعية الإتصال"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "سرعة الإتصال"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "الوقت الأقصى للاتصال (بالثواني)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "اسم الدخول للحساب (اسم المستخدم)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "كلمة المرور للحساب"
-
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr "كابل: خيارات الحساب"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr "استخدام BPALogin )مطلوبة لـTelstra)"
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "اختيار واجهة الشبكة لتهيئتها:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "جهاز الشبكة"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "مودم ISDN خارجي"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "اختيار جهاز!"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "تهيئة ISDN"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "ما هو نوع البطاقة لديك؟"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"إذا كانت لديك بطاقة ISA، فإن القيم التي ستعرض على الشاشة التالية يجب أن تكون "
-"صحيحة.\n"
-"\n"
-"إذا كانت لديك بطاقة PCMCIA، يجب عليك أن تعرف قيم \"irq\" و \"io\" الخاصة "
-"ببطاقتك.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "استمرار"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "إجهاض"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "أي من الآتي هي بطاقة ISDN الخاصة بك؟"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-"يتوفّر مشغّل CAPI لهذا المودم. قد يكون لدافعة CAPI هذه قدراتٍ أكثر من مشغل حرّ "
-"(كالقدرة على إرسال الفاكسات). أي المشغّلين تودّ استعماله؟"
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "المشغّل"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "ما هو البروتوكول الذي تريد استخدامه؟"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "البروتوكول"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"اختر موفر الخدمة الخاص بك.\n"
-"ان لم يكن موجوداً في القائمة، اختر غير موجود."
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "المُزوّد:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"المودم لديك غير مدعوم من النظام.\n"
-"الق نظرة على http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "اختر المودم لتهيئته:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "الرجاء اختيار المنفذ التسلسلي المرتبط به المودم لديك."
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "اختر مُزوّدك:"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "الاتصال الهاتفي: خيارات الحساب"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "اسم الإتصال"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "رقم الهاتف"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "معرّف الدخول"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "الاتصال الهاتفي: مُعطيات IP"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "مُعطيات IP"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "عنوان IP"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "قناع الشّبكة الفرعيّة"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "الاتصال الهاتفي: مُعطيات DNS"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "اسم النطاق"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "خادم DNS الأول (اختياري)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "خادم DNS الثاني (اختياري)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "تحديد اسم المضيف من عنوان IP"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "البوّابة"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "عنوان IP للبوّابة"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "إعداد ADSL"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "الرجاء اختيار مُزوّدك بـADSL"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"تحتاج إلى Alcatel microcode.\n"
-"يمكنك تزويدها الآن عبر قرص مرن أو تجزيء ويندوز،\n"
-"أو تخطّى هذا وافعله لاحقاً."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "استخدام قرص مرن"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "جاري تغيير حجم تجزيء ويندوز"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "قم به لاحقاً"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "فشل نسخ Firmware، لم يُعثر على الملفّ %s"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "نجح نسخ Firmware"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"تحتاج إلى alcatel microcode.\n"
-"قم بتنزيلها على\n"
-"%s\n"
-"و انسخ الملف mgmt.o إلى /usr/share/speedtouch"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "رقم تعريف المسار الوهمي (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "رقم تعريف الدّارة الوهميّة (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "التّضمين:"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"مودم ECI Hi-Focus لا يمكن دعمه بسبب مشكلة توزيع المُشغّل المُجمّع.\n"
-"\n"
-"يمكنك العثور على المُشغّلات على الموقع http://eciadsl.flashtux.org/"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "تحميل المُشغّل يدوياً"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr "استخدام مشغّل ويندوز (مع ndiswrapper("
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "تعذر تثبيت حزمة %s!"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "ترجمة اسم مضيف Zeroconf"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "جاري تهيئة جهاز الشبكة %s (مشغّل %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-"البروتوكولات التّالية يمكن استخدامها لتهيئة اتصال LAN. الرجاء اختيار "
-"البروتوكول الذي تريد استخدامه"
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"الرجاء إدخال تهيئة IP الخاصة بهذه الماكينة.\n"
-"كل مادة يجب إدخالها كعنوان IP بشكل منقوط\n"
-"(مثلاً، 1.2.3.4(."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "تعيين اسم المضيف من عنوان DHCP"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "اسم مضيف DHCP"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "قناع الشبكة"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "تتبع هوية بطاقة الشبكة (مفيد للحاسبات الدفترية)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "القبْس السريع للشبكة"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "البدء عند الإقلاع"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "متري"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "عميل DHCP"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "الوقت الأقصى للاتصال (بالثواني)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "عنوان IP لخادم DNS"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "عنوان IP يجب أن يكون بنسق 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "عنوان البوابات يجب أن تكون على النسق 1.2.3.4"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "تحذير: عنوان الـ IP %s عادة ما يكون محفوظاً!"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s قيد الاستخدام مسبقاً\n"
-
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "اختيار مشغّل ndiswrapper"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr "تثبيت مشغّل جديد"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "الرجاء إدخال مُعطيات اللاسلكيّة لهذه البطاقة:"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "وضعية التّشغيل"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "مُصطنع"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "مُدار"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "رئيسي"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "مُكرّر"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "ثانوي"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "آلي"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "إسم الشّبكة (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "رقم مُعرّف الشّبكة"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "تردّد التّشغيل"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "عتبة الحساسية"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "معدّل البث (بِتْ/ث)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-"يضيف RTS/CTS المُصافحة قبل كل بثّ رزم للتّأكّد من أنّ\n"
-"القناة آمنة للإرسال. يضيف هذا ضغطاً، ولكن يزيد الأداء في حالة وجود\n"
-"نقاط اتّصال مخفيّة أو عدد كبير من نقاط الاتصال النّشطة. يحدّد هذا المُعطى\n"
-"الرزمة الأصغر التّي ترسل لها نقطة الاتصال RTS، والتي هي قيمة مساوية لأكبر\n"
-"حجم رزمة تُعطّل المخطّط. يمكنك أيضاً تحديد هذا المُعطى بتلقائي،\n"
-"ثابت أو معطّل."
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "مستوى التّجزّء"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "المُعطيات الإضافية لأمر Iwconfig"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-"هنا، يمكن تهيئة مُعاملات إضافيّة للتشبيك اللاسلكي مثل:\n"
-"ap، channel، commit، enc، power، retry، sens، txpower )nick محدّد مسبّقا كإسم "
-"المضيف).\n"
-"\n"
-"راجع صفحة الدّليل iwconfig(8)  للمزيد من المعلومات."
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "المُعطيات الإضافيّة لأمر Iwspy"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-"يستخدم iwspy لتحديد قائمة من العناوين لواجهة الشبكة اللاسلكيّة\n"
-"ولقراءة معرومات جودة الاتصال لكل من هذه.\n"
-"\n"
-"هذه المعلومات هي نفسها كالتي متوفّرة في /proc/net/wireless :\n"
-"جودة الاتصال، قوّة الإشارة ومستوى الضّوضاء.\n"
-"\n"
-"رجاع صفحة دليل iwpspy)8( للمزيد من المعلومات."
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "المُعطيات الإضافيّة لأمر Iwpriv"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-"يمكنك Iwpriv من إعداد المُعطيات الاختياريّة (الخاصّة) لواجهة الشّبكة\n"
-"اللّاسلكيّة.\n"
-"\n"
-"يتعامل Iwpriv مع المُعطيات وتحديد الخواصّ لكل مشغّل (بعكس\n"
-"iwconfig والذي يتعامل مع الأشياء العامّة).\n"
-"\n"
-"نظريّاً، يجب أن يُبيّن مواثقة كلّ مشغّل جهاز كيفيّة استخدام\n"
-"الأوامر الخاصّة بكل واجهة وتأثيرها.\n"
-"\n"
-"راجع صفحة دليل iwpriv(8) للمزيد من المعلومات."
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"يجب أن يكون للتردّد اللاحقة k، أو M أو G (مثلاً، \"2.46G\" للتردّد 2.46 GHz(، "
-"أو إضافة أصفار كافية."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"يجب أن يكون للمعدّل اللاحقة k، أو M أو G (مثلاً، \"11M\" للمعدّل 11M)، أو إضافة "
-"أصفار كافية."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"الرجاء إدخال اسم المضيف.\n"
-"يجب أن يكون اسم المضيف صالحاً و كاملاً،\n"
-"مثل ``mybox.mylab.myco.com''.\n"
-"يمكنك أيضاً إدخال عنوان IP الخاص بالبوابة ان وُجدت."
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr "أخيراً وليس آخراً يمكنك أيضاً أن تدخل عناوين IP لخادمات DNS."
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "اسم المضيف (اختياري)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "اسم المضيف"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "خادم DNS 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "خادم DNS 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "خادم DNS 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "نطاق البحث"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr "بشكل افتراضي سيتمّ تحديد نطاق البحث من اسم المضيف المهيّء بالكامل"
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "البوابة (مثلاً %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "جهاز البوابة"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "عنوان خادم DNS يجب أن يكون على النسق 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "عنوان البوابات يجب أن تكون على النسق 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-"إن أردت، أدخل إسم مضيف Zeroconf.\n"
-"هذا هو الإسم الّذي سيستعمله حاسبك للتّشهير\n"
-"بأيّة من خدماته المشتركة و الّتي لا تديرها الشّبكة.\n"
-"غير ضروري على معظم الشّبكات."
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "اسم مضيف Zeroconf"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "يجب أن يحتوي اسم مضيف Zeroconf على . (نقطة("
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"لقد قمت بتهيئة طرق متعددة للإتصال بالإنترنت.\n"
-"اختر الطريقة التي تريد استخدامها.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "وصلة انترنت"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "تم الانتهاء من التهيئة، هل تريد تطبيق الإعدادات ؟"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "هل تريد بدء الاتصال عند الإقلاع؟"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "هل تريد بدء الاتصال عند الإقلاع؟"
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "آليا عند الإقلاع"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr "باستعمال بريمج الشّبكة (Net Applet( في درج النّظام"
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr "يدويا (ستمكّن الواجهة عند الإقلاع رغم هذا)"
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr "كيف تريد طلب هذا الاتصال؟"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "يجب إعادة تشغيل الشبكة. هل تريد إعادة تشغيلها؟"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "تهيئة الشبكة"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"ظهرت مشكلة أثناء إعادة تشغيل الشبكة: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "هل تريد أن تحاول أن تتصل بالإنترنت الآن؟"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "اختبار الوصلة..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "النظام الآن متصل بالإنترنت"
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "لأسباب أمنية، سيتم قطع الإتصال الآن."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"لا يبدو أن النظام متصل بالإنترنت.\n"
-"حاول إعادة تهيئة الوصلة."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"تهانينا، انتهت تهيئة الشبكة و الإنترنت.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"بعد عمل ذلك، ننصح بإعادة تشغيل بيئة X لديك لتفادي أي مشاكل تتعلق بإسم المضيف."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"ظهرت مشاكل أثناء التهيئة.\n"
-"اختبر الوصلة باستخدام net_monitor أو mcc. إذا لم تعمل الوصلة، فقد تريد إعادة "
-"التهيئة."
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"لأنك تقوم بالتثبيت عبر الشبكة، فقد تمت تهيئة الشبكة مسبقاً.\n"
-"اضغط موافق لحفظ التهيئة الخاصة بك، أو اضغط إلغاء لإعادة تهيئة وصلات الإنترنت "
-"و الشبكة.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"حدث خطأ غير متوقّع:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "تهيئة البروكسي"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "بروكسي HTTP"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "بروكسي FTP"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "البروكسي يجب أن يكون http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "يجب أن يبدأ العنوان بـ 'ftp:' أو 'http:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "تم اكتشاف إعداد للجدار الناري!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"تحذير! تم إيجاد إعداد جدار ناري موجود مسبقا. ربما تحتاج إلى اصلاح يدوي بعد "
-"التثبيت."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"الرجاء إدخال اسم الواجهة المتصلة بالإنترنت.\n"
-"\n"
-"أمثلة:\n"
-"\t\tppp+ لوصلات المودم و DSL، \n"
-"\t\teth0، أو eth1 لوصلات الكيبل، \n"
-"\t\tippp+ لوصلات ISDN.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "أدخل قرص مرن"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"أدخل قرص مرن منسّق على نظام ملفات FAT في السواقة %s مع %s في الدّليل الجذري "
-"واضغط %s"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "خطأ في الوصول إلى القرص المرن، لم يمكن تجهيز الجهاز %s"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "فشل التركيب: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "التجزيئات الممتدة غير مدعومة على هذه البيئة"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"توجد مساحة فارغة في جدول التجزئة لديك لكني لا أستطيع استخدامها.\n"
-"الحل الوحيد هو أن تنقل التجزيئات الأساسية لتحصل على المساحة بين التجزيئات "
-"الممتدة."
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "فشلت الإستعادة من الملف %s: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "ملف نسخ احتياطي سيئ"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "خطأ أثناء الكتابة إلى الملف %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"هناك شئ سيئ يحصل للقرص. \n"
-"لقد فشل اختبار للتأكد من صحة البيانات. \n"
-"هذا يعني أن كتابة أي شئ على هذا القرص سينتهي ببيانات عشوائية و فاسدة."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "يجب أن يكون لديك"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "مهم"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "ظريف جداً"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "ظريف"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "ربما"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "جاري ارسال الملفات..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(على %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(على هذا الجهاز)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "مُهيّء على أجهزة أخرى"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "على خادم CUPS \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (افتراضي)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Print, Do not Queue"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Common Unix Printing System (الخادم البعيد)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "خادم CUPS بعيد"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "طراز غير معروف"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "طابعة محلية"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "طابعة بعيدة"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "طابعة على خادم CUPS بعيد"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "طابعة على خادم lpd بعيد"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "طابعة شبكة (TCP/Socket("
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "طابعة على خادم SMB/Windows 95/98/NT"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "طابعة على خادم NetWare"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "أدخل URI الخاص بالطابعة"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "حوّل الوظيفة إلى الأمر"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "مفضّل"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "طراز غير معروف"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "مُهيّء على هذا الجهاز"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " على المنفذ المتوازي #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr "، طابعة USB #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr "، طابعة USB"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr "، طابعة HP على المنفذ المتوازي"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr "، طابعة HP على منفذ USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr "، طابعة HP على HP JetDirect"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr "، طابعة HP"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr "، جهاز متعدد الوظائف على المنفذ المتوازي #%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr "، جهاز متعدد الوظائف على المنفذ المتوازي"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr "، جهاز متعدد الوظائف على منفذ USB"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr "، جهاز متعدد الوظائف على HP JetDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr "، جهاز متعدد الوظائف"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr "، جاري الطباعة إلى %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "على خادم LPD \"%s\"، الطابعة \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr "، مضيف TCP/IP \"%s\"، المنفذ \"%s\""
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "على خادم SMB/Windows \"%s\"، المشاركة \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " على خادم Novell \"%s\"، الطابعة \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr "، باستخدام الأمر %s"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "المنفذ المتوازي #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "طابعة USB #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "طابعة USB"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "طابعة HP على المنفذ المتوازي"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "طابعة HP على منفذ USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "طابعة HP على HP JetDirect"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "طابعة HP"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "جهاز متعدد الوظائف على المنفذ المتوازي #%s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "جهاز متعدد الوظائف على المنفذ المتوازي"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "جهاز متعدد الوظائف على منفذ USB"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "جهاز متعدد الوظائف على HP JetDirect"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "جهاز متعدد الوظائف"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "يطبع إلى %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "خادم LPD \"%s\"، الطابعة \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "مضيف TCP/IP \"%s\"، المنفذ \"%s\""
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "خادم SMB/ويندوز \"%s\"، المشاركة \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "خادم Novell \"%s\"، الطابعة \"%s\""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "يستخدم الأمر %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "طابعة خام (لا مشغل)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "الشبكة/الشبكات المحلية"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "الواجهة  \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "الشبكة %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "المضيف %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (المنفذ %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"الطّابعة HP LaserJet 1000 تحتاج إلى تحميل firmware بعد تشغيلها. قم بتنزيل "
-"حزمة مشغّل ويندوز من موقع HP (حيث أن الـfirmware الموجود على القرص المدمج لا "
-"يعمل) وقم باستخراج ملف firmware منه بإزالة الضّغط عن ملف الاستخراج الذّاتي '."
-"exe' باستخدام أداة 'unzip' والبحث عن الملفّ 'sihp1000.img'. انسخ الملفّ إلى "
-"الدّليل '/etc/printer'. هناك ستجده شيفرة المُحمّل التّلقائيّة وسيحمّل حينما تكون "
-"الطّابعة متّصلة ومشغّلة.\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "إعدادات طابعات CUPS"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"هنا يمكنك أن تختار إن كان يجب للطابعات المتصلة بهذا الجهاز أن يكون ممكن "
-"الوصول إليهامن قبل الأجهزة الأخرى البعيدة ومن قبل أيّ منها."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"يمكنك كذلك أن تقرر هنا إذا كانت الطابعات الموجودة على الأجهزة البعيدة أن "
-"تكون متوفرة آلياً لهذه الماكينة."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "الطابعات على هذه الماكينة متوفرة للأجهزة الأخرى"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "اعثر على الطابعات الموجودة على الماكينات البعيدة آلياً"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "مشاركة الطابعات على المضيفات/الشبكات: "
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "تهيئة مخصصة"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "لا أجهزة بعيدة"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "خادمات CUPS الإضافية: "
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"للوصول إلى الطابعات على خادمات CUPS البعيدة في شبكتك المحلية تحتاج فقط إلى "
-"تشغيل خيار \"اعثر على الطابعات المتوفرة على الماكينات البعيدة\"؛ ستقوم "
-"خادمات CUPS بإعلام ماكينتك عن الطابعات الموجودة لديها. كافة الطابعات التي تم "
-"التعرف عليها من قِبل ماكينتك موجودة في قسم \"الطابعات البعيدة\" على نافذة "
-"Printerdrake الرئيسية. إذا لم تكن خادمات CUPS في شبكتك المحلية، فعليك أن "
-"تقوم بإدخال عناوين IP و أرقام المنافذ (اختياري) للحصول على معلومات الطابعات "
-"من الخادمات."
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "وضعية طبع النصوص اليابانية"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"تشغيل هذا الخيار يسمح بطباعة ملفات النصوص العادية باللغة اليابانية. استخدم "
-"هذه الميزة فقط إذا كنت تريد طباعة النصوص باليابانية، إذا تم تنشيط هذا الخيار "
-"لن يمكنك طباعة الحروف اللاتينية ذات العلامات و لن يمكنك تعديل الهوامش و حجم "
-"الخطوط الخ. هذا الإعداد يؤثر فقط على الطابعات المعرفة على هذه الماكينة. إذا "
-"كنت تريد طباعة النصوص اليابانية على طابعة بعيدة، يجب عليك تنشيط هذه الوظيفة "
-"على الطابعة البعيدة."
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "تصحيح آلي لتهيئة CUPS"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"عند تشغيل هذا الخيار، فعند كل بداية تشغيل لـCUPS سيتم التأكد آلياً من ما\n"
-"\n"
-"- إذا كان LPD/LPRng مثبتاً، لن تتم الكتابة فوق /etc/printcap عن طريق CUPS\n"
-"\n"
-"- إذا كان /etc/cups/cupsd.conf مفقود، سيتم انشاؤه في هذه الحال\n"
-"\n"
-"- إذا كانت معلومات الطباعة منشورة، أي أنها لا تحتوي \"localhost\" كإسم "
-"للخادم.\n"
-"\n"
-"إذا كانت بعض هذه الإجراءات قد تسببت بمشاكل لك، عطّل هذا الخيار، لكن في هذه "
-"الحال عليك الإنتباه لهذه النقاط."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr "خادم CUPS بعد بدون عفريت CUPS محلي"
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "يعمل"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "متوقف"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"في هذا الوضع سيتم إيقاف عفريت CUPS وستذهب كل طلبات الطباعة إلى الخادم المحدد "
-"أدناه. لاحظ أنّه ليس ممكناً تعريف صافّات طباعة محلّيّة وفي حال كان الخادم مُعطّلاً "
-"فلن يمكن الطباعة مطلقاً من هذه الماكينة."
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "مشاركة الطابعات المحلية"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"هذه هي الماكينات و الشبكات التي يجب أن تكون الطابعات المحلية متوفرة لها:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "أضف مضيف/شبكة"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "تعديل المضيف/الشبكة المختارة"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "حذف المضيف/الشبكة المختارة"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "عنوان IP للمضيف/الشبكة:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "اختيار الشبكة أو المضيف الذي يجب أن تكون الطابعات المحلية متوفرة له:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "عنوان IP للمضيف/الشبكة مفقود."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "عنوان IP المدُخل للمضيف/الشبكة غير صحيح.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "أمثلة لعناوين IP صحيحة:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "هذا المضيف/الشبكة موجود في القائمة مسبقاً، لا يمكن إضافته مرة أخرى.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "الوصول إلى الطابعات على خادمات CUPS البعيدة"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"أدخل هنا خادمات CUPS التي تريد استخدام طابعاتها. تحتاج إلى عمل ذلك فقط ان لم "
-"تقم الخادمات بنشر معلومات الطابعات على الشبك المحلية."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "إضافة خادم"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "حرر الخادم المختار"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "إزالة الخادم المختار"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "أدخل عنوان IP و منفذ المضيف الذي تريد استخدام طابعاته."
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "إذا لم يتم إعطاء منفذ، سيتم اتخاذ 631 كمنفذ افتراضي."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "IP الخادم مفقود!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "عنوان IP المدُخل غير صحيح.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "يجب أن يكون رقم المنفذ رقماً صحيحاً!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "هذا الخادم موجود في القائمة مسبقاً، لا يمكن اضافته مرة أخرى.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "المنفذ"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "عليه، اسم أو IP الخادم البعيد:"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "اسم خادم CUPS أو عنوان IP مفقود."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "قراءة بيانات الطابعة..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "إعادة تشغيل CUPS..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "اختيار وصلة الطابعة"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "ما هي طريقة توصيل الطابعة؟"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"لا تحتاج إلى تهيئة الطابعات على خادمات CUPS البعيدة؛ هذه الطابعات يمكن "
-"اكتشلفها آلياً."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"تحذير: ليس هناك اتّصال شبكة نشط، فلا يمكن فحص أو استكشاف الطّابعات البعيدة!"
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr "التحقق الآلي من الطابعات (محلية، TCP/Socket، و SMB وعنوان URI للجهاز)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr "انتهى وقت التعديل للاكتشاف الآلي للطابعة الشبكية"
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr "أدخل وقت الانتهاء للاكتشاف الآلي للطابعة الشبكية (بالملي ثانية) هنا."
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-"كلما كانت وقت الانتهاء أطول، زادت فعالية اكتشافات الطابعات الشبكية، ولكن قد "
-"يستغرق هذا وقت أطول بسبب ذلك، خصوصاً إن كنت هناك العديد من الماكينات ذوات جدر "
-"نارية في الشبكة."
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "وقت الانتهاء يجب أن يكون رقماً صحيحاً موجباً!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "التأكد من نظامك..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "وطابعة غير معروفة"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "و %d طابعات غير معروفة"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"الطابعات التالية\n"
-"\n"
-"%s%s\n"
-"متصلة مباشرةً بنظامك"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"الطابعات التالية\n"
-"\n"
-"%s%s\n"
-"متصلة مباشرةً بنظامك"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"الطابعة التالية\n"
-"\n"
-"%s%s\n"
-"متصلة مباشرةً بنظامك"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"توجد طابعة غير معروفة متصلة مباشرةً بنظامك"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"توجد %d طابعات غير معروفة متصلة مباشرةً بنظامك"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "لم يتم العثور على طابعات متصلة مباشرةً بهذه الماكينة"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (تأكد من أن كل الطابعات موصولة و تعمل).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"هل تريد تمكين الطباعة على الطابعات المذكورة أعلاه أم على الطابعات في الشبكة "
-"المحلية؟\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "هل تريد تمكين الطباعة على الطابعات في الشبكة المحلية؟\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "هل تريد تمكين الطباعة على الطابعات المذكورة أعلاه؟\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "هل أنت متأكد أنك تريد تنصيب الطباعة على هذه الماكينة؟\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"ملحوظة: اعتماداً على طراز الطابعة و نظام الطباعة فسيتم تثبيت حوالي %d "
-"ميغابايت من البرمجيات الإضافية."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "جاري البحث عن طابعات جديدة..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "عُثر على طابعة على %s..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr ")"
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " على "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr "("
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "إختيار وحدات الطابعة"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "ما هو نوع الطابعة لديك؟"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"لم يتمكن Printerdrake من التعرف على طراز طابعتك %s. الرجاء اختيار الطراز "
-"الصحيح من القائمة."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"إذا لم تكن طابعت موجودة في القائمة، الرجاء اختيار طابعة متوافقة (انظر دليل  "
-"الطابعة) أو اختر طابعة مماثلة."
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "جاري تهيئة الطابعة على \"%s\" ..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "جاري تهيئة الطابعة \"%s\" ..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "إضافة طابعة جديدة"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"أهلاً بكم في معالج تهيئة الطابعات\n"
-"\n"
-"هذا المرشد يسمح لك بتثبيت الطابعات المحلية أو البعيدة ليتم استخدامها من هذه "
-"الماكينة و من الماكينات الأخرى على الشبكة.\n"
-"\n"
-"يسألك المرشد عن كل المعلومات الأساسية لإعداد الطابعة و تعطيك القدرة على "
-"الوصول لكل مشغلات الطابعات و خيارات المُشغّلات و أنواع وصلات الطابعة."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"أهلاً بكم في معالج إعداد الطابعات\n"
-"هذا المرشد سيساعدك على تثبيت الطابعة/الطابعات الموصولة بهذا الحاسب أو "
-"الموصولة مباشرةً بالشبكة أو بماكينة ويندوز بعيدة.\n"
-"\n"
-"إذا كانت لديك طابعة/طابعات موصولة بهذه الماكينة، فضلاً قم بتوصيلها إلى هذا "
-"الحاسب و قم بتشغيلها كي يتم التحقق منها/منهم آلياً. أيضاً يجب أن تكون طابعة/"
-"طابعات الشبكة و أجهزة ويندوز موصولة و مشغّلة.\n"
-"\n"
-"لاحظ أن التحقق الآلي من الطابعات على الشبكة قد يستغرق وقتاً أطول من التحقق "
-"الآلي من الطابعات الموصولة بهذه الماكينة فقط. لذا قم بتعطيل التحقق الآلي من "
-"طابعات الشبكة و/أو الطابعات المستضافة من ويندوز إذا لم تكن تحتاج إلى هذه "
-"الميزة.\n"
-"\n"
-" اضغط \"التالي\" عندما تكون مستعداً، و على \"إلغاء\" إذا لم تكن تريد إعداد "
-"الطابعة/الطابعات الآن."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"أهلاً بكم في معالج إعداد الطابعات\n"
-"\n"
-"هذا المرشد سيساعدك على تثبيت الطابعة/الطابعات الموصولة بهذا الحاسب.\n"
-"\n"
-"إذا كانت لديك طابعة/طابعات موصولة بهذه الماكينة، فضلاً قم بتوصيلها إلى هذا "
-"الحاسب و قم بتشغيلها كي يتم التحقق منها/منهم آلياً.\n"
-"\n"
-" اضغط \"التالي\" عندما تكون مستعداً، و على \"إلغاء\" إذا لم تكن تريد إعداد "
-"الطابعة/الطابعات الآن."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"أهلاً بكم في معالج إعداد الطابعات\n"
-"هذا المرشد سيساعدك على تثبيت الطابعة/الطابعات الموصولة بهذا الحاسب أو "
-"الموصولة مباشرةً بالشبكة.\n"
-"\n"
-"إذا كانت لديك طابعة/طابعات موصولة بهذه الماكينة، فضلاً قم بتوصيلها إلى هذا "
-"الحاسب و قم بتشغيلها كي يتم التحقق منها/منهم آلياً. أيضاً يجب أن تكون طابعة/"
-"طابعات الشبكة موصولة و مشغّلة.\n"
-"\n"
-"لاحظ أن التحقق الآلي من الطابعات على الشبكة قد يستغرق وقتاً أطول من التحقق "
-"الآلي من الطابعات الموصولة بهذه الماكينة فقط. لذا قم بتعطيل التحقق الآلي من "
-"طابعات الشبكة إذا لم تكن تحتاج إلى هذه الميزة.\n"
-"\n"
-" اضغط \"التالي\" عندما تكون مستعداً، و على \"إلغاء\" إذا لم تكن تريد إعداد "
-"الطابعة/الطابعات الآن."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"أهلاً بكم في معالج إعداد الطابعات\n"
-"\n"
-"هذا المرشد سيساعدك على تثبيت الطابعة/الطابعات الموصولة بهذا الحاسب.\n"
-"\n"
-"إذا كانت لديك طابعة/طابعات موصولة بهذه الماكينة، فضلاً قم بتوصيلها إلى هذا "
-"الحاسب و قم بتشغيلها كي يتم التحقق منها/منهم آلياً.\n"
-"\n"
-" اضغط \"التالي\" عندما تكون مستعداً، و على \"إلغاء\" إذا لم تكن تريد إعداد "
-"الطابعة/الطابعات الآن."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "تحقق أليا من الطابعات المتصلة بهذا الجهاز"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "تحقّق آلياً من الطابعات الموصولة مباشرةً بالشبكة المحلية"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "تحقّق آلياً من الطابعات الموصولة بماكينات تعمل على ميكروسوفت ويندوز"
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "كشف آلي"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"تهانينا، تم تثبيت و تهيئة طابعتك!\n"
-"\n"
-"يمكنك الطباعة باستخدام أمر \"اطبع\" في تطبيقك (عادة في قائمة \"ملف\").\n"
-"\n"
-"إذا أردت إضافة أو إزالة، أو إعادة تسمية طابعة، أو إذا أردت تغيير خيارات "
-"الطابعة الإفتراضية (صينيّة إدخال الورق، جودة الطباعة،...)، اختر \"الطابعة\" "
-"في قسم \"العتاد\" في مركز تحكم %s."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "تعذر تثبيت حزم %s!"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr "جاري تخطّي استكشاف خادم ويندوز/SMB"
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "تحقق آلي من الطابعات"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "جاري التحقق من الأجهزة..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr "، طابعة شبكة \"%s\"، المنفذ %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "، الطابعة \"%s\" على خادم SMB/Windows \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "تم التحقق من %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "الطابعة على المنفذ المتوازي #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "طابعة شبكة \"%s\"، المنفذ %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "الطابعة \"%s\" على خادم SMB/Windows \"%s\""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "طابعة محلية"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"لم يعثر على طابعة محلية! لتثبيت طابعة يدوياً ادخل اسم جهاز/اسم ملف في حقل "
-"الإدخال (الطابعات المتوازية: /dev/lp0، /dev/lp1، ...، مماثلة لـLPT1:، LPT2:"
-"، ...، طابعة USB الأولى: /dev/usb/lp0، طابعة USB الثانية: /dev/usb/lp1، ...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "يجب عليك إدخال جهاز أو اسم ملف!"
-
-#
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "لا توجد طابعة!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "الطابعات المحلية"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "الطابعات المتوفرة"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "تم اكتشاف الطابعة الآتية آلياً. "
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"إذا لم تكن هذه هي التي تريد تهيئتها، أدخل اسم جهاز/اسم ملف في حقل الإدخال"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "بدلاً من ذلك، يمكنك تحديد اسم جهاز/اسم ملف في حقا الإدخال"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "ها هي قائمة بكل الطابعات المتحقَّق منها آلياً. "
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"الرجاء اختيار الطابعة التي تريد إعدادها أو أدخل اسم جهاز/اسم ملف في حقل "
-"الإدخال"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"الرجاء إدخال الطابعة التي يجب أن تذهب اليها وظائف الطباعة أو أدخل اسم جهاز/"
-"اسم ملف في حقل الإدخال"
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"إعداد الطابعة سيعمل بشكل آلي. إذا لم يتم اكتشاف طابعتك بالشكل الصحيح أو إذا "
-"كنت تفضل إعداد مخصص شغّل \"تهيئة يدوية\"."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "حالياً لا يوجد احتمال بديل"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"الرجاء إدخال الطابعة التي تريد إعدادها. إعداد هذه الطابعة سيعمل آلياً. ان لم "
-"يتم اكتشاف الطابعة بالشكل الصحيح أو إذا كنت تفضل تهيئة يدوية تشغيل \"تهيئة "
-"يدوية\"."
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "رجاء اختيار الطابعة التي ستذهب اليها وظائف الطباعة."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"الرجاء إدخال المنفذ المتصلة به الطابعة أو أدخل اسم جهاز/اسم ملف في حقل "
-"الإدخال"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "رجاء اختيار المنفذ الموصلة إليه طابعتك."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (المنافذ المتوازية: /dev/lp0، /dev/lp1، ...، مماشل لـ LPT1:، LPT2:، ...، "
-"طابعة USB الأولي: /dev/usb/lp0، طابعة USB الثانية: /dev/usb/lp1، ...)"
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "يجب عليك إدخال/اختيار طابعة/جهاز"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "جاري الإجهاض"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "خيارات طابعة lpd البعيدة"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"لاستخدام طابعة lpd بعيدة، عليك إعطاء اسم مضيف خادم الطابعة و اسم الطابعة على "
-"ذلك الخادم."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "اسم المضيف البعيد"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "اسم الطابعة البعيدة"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "اسم المضيف البعيد مفقود!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "اسم الطابعة البعيدة مفقود!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "معلومات"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "تم اكتشاف الطراز: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "جاري مسح الشبكة..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr "، الطابعة \"%s\" على الخادم \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "الطابعة \"%s\" على الخادم \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "خيارات طابعة SMB (ويندوز ×9/إنتي)"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"للطباعة إلى طابعة SMB، ستحتاج إلى إعطاء اسم مضيف SMB (ملحوظة! قد يكون مختلفاً "
-"عن اسم مضيف TCP/IP!) و ربما عنوان IP الخاص بخادم الطابعة، إضافة إلى اسم "
-"المشاركة لطابعة التي تود الوصول اليها بالإضافة إلى اسم مستخدم، كلمة مرور، و "
-"مجموعة عمل مناسبة."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" إذا تم اكتشاف الطابعة المطلوبة آلياً، كل ما عليك هو اختيارها من القائمة ثم "
-"أضف اسم المستخدم، كلمة المرور، و/أو مجموعة العمل ان احتجت لذلك."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "مضيف خادم SMB"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP خادم SMB"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "اسم المشاركة"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "مجموعة العمل"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "تحقق آلي"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "يجب إعطاء اسم الخادم أو رقم IP الخاص بالخادم!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "اسم مشاركة سامبا مفقود!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "تحذير أمني!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"أنت على وشك تهيئة الطباعة على حساب في ويندوز مع كلمة مرور. بسبب خطأ في "
-"هيكلية عميل Samba، يتم وضع كلمة المرور بنص واضح في سطر أوامر عميل Samba  "
-"المستخدم لنقل وظيفة الطباعة إلى خادم ويندوز. لذا فإنه يمكن لكل مستخدم على "
-"هذه الماكينة أن يعرض كلمة المرور على الشاشة باستخدام كلمات مرور مثل \"ps "
-"auxwww\".\n"
-"\n"
-"نحن ننصح باستعمال واحد من البدائل التالية (في كل الحالات عليك التأكد أن "
-"الماكينات الموجودة فقط على الشبكة المحلية تستطيع الوصول إلى خادم ويندوز، عن "
-"طريق استخدام جدار ناري مثلاً):\n"
-"\n"
-"استخدم حساب دون كلمة مرور على خادم ويندوز، مثل حساب \"GUEST\" أو حساب خاص "
-"لاستخدامه للطباعة. لا تقم بإزالة الحماية عن طريق كلمات المرور من حسابك "
-"الشخصي أو من حساب مدير النظام.\n"
-"\n"
-"قم بإعداد خادم ويندوز لجعل الطابعة متوفرة تحت بروتوكول LPD. ثم قم بإعداد "
-"الطباعة من هذه الماكينة مع نوع الوصلة \"%s\" في PrinterDrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"قم بإعداد خادم ويندوز لجعل الطابعات متوفرة تحت بروتوكول IPP و قم بإعداد "
-"الطباعة من هذه الماكينة باستخدام نوع الوصلة \"%s\" في Printerdrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"وصّل الطابعة إلى خادم لينكس و اجعل ماكينات ويندوز تتصل به كعملاء.\n"
-"\n"
-"هل تريد فعلاً متابعة إعداد هذه الطابعة كما تفعل الآن؟"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "خيارات طابعة NetWare"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"للطباعة على طابعة NetWare، تحتاج إلى إعطاء اسم خادم طباعة NetWare (لاحط أنه "
-"قد يختلف عن اسم مضيف TCP/IP!) بالإضافة إلى اسم الصف للطابعة التي رغب في "
-"الوصول اليها بالإضافة إلى اسم مستخدم و كلمة مرور مناسبتين."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "خادم الطابعة"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "اسم صفّ الطابعة"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "اسم خادم NCP مفقود!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "اسم صفّ NCP مفقود!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr "، المضيف \"%s\"، المنفذ %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "المضيف \"%s\"، المنفذ %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "خيارات طابعة TCP/Socket"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"اختر واحدة من الطابعات التي تم التحقق منها آلياً من القائمة أو أدخل اسم "
-"المضيف أو رقم IP و رقم المنفذ الإختياري (الإفتراضي هو 9100) في حقول الإدخال."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"للطباعة إلى طابعة TCP أو socket، يجب عليك إعطاء اسم المضيف أو عنوان IP الخاص "
-"بالطابعة و اختيارياً يمكنك إضافة رقم منفذ الطابعة (الإفتراضي هو 9100). على "
-"خادمات HP JetDirect يكون رقم المنفذ عادةً هو 9100، على الخادمات الأخرى يمكن "
-"أن يكون الرقم غير ذلك. الق نظرة على دليل المستخدم للعتاد الخاص بك."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "اسم مضيف الطابعة أو الـ IP مفقود!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "اسم مضيف الطابعة أو الـ IP"
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "جاري إنعاش لائحة عناوين URI للجهاز..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "URI جهاز الطابعة"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"يمكنك تحديد الـURI مباشرة للوصول إلى الطابعة. الـURI يجب أن يتوافق مع "
-"متطلبات CUPS أو Foomatic. لاحط أنه ليست كل أنواع الـURI مدعومة من "
-"الـspoolers."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "يجب إدخال URI صالح!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "حول إلى الأمر"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"هنا يمكنك تحديد أي أمر هلامي يمكن تحويل وظيفة الطباعة اليه بدلاً من ارسالها "
-"مباشرةً إلى الطابعة."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "سطر الأوامر"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "يجب إدخال سطر أوامر"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-"في العديد من طابعات HP هناك وظائف مميّزة متوفّرة، مثل الصيانة (التحقق من مستوى "
-"الحبر، ونتظيف الفوهة، ومحاذاة الرأس، ...) على كلّ طابعات inkjet الغير قديمة "
-"جداً، والمسح الضوئي على الأجهزة متعددة الوظائف، والوصول إلى بطاقة الذاكرة على "
-"الطابعات ذات قارئات البطاقات."
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-"للوصول إلى هذه الوظائف الإضافية على طابعة HP الخاصة بك، يجب إعدادها باستخدام "
-"البرنامج المناسب:"
-
-# These two seem like 'fore-edge' and 'full-blood'
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-"إما باستخدام HPLIP الأجدد الذي يسمح بصيانة الطابعة من خلال التطبيق الرسومي "
-"السهل الاستخدام \"صندوق الأدوات\" والمتقدم القويّ الصلة على طرز PhotoSmart "
-"الأجدد."
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-"أو باستخدام HPOJ الأقدم الذي يسمح بالوصول فقط إلى الماسح الضوئي وبطاقة "
-"الذاكرة، ولكن قد يساعدك في حالة فشل HPLIP."
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr "ما هو اختيارك (اختيار \"لاشيء\" لغير طابعات HP)? "
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"إذا كانت طابعتك جهازاً متعدد الوظائف من HP أو Sony (OfficeJet، PSC، LaserJet "
-"1100/1200/1220/3000/3200/3300/4345 مع ماسح ضوئي، Sony IPJ-V100) أو جهاز HP "
-"PhotoSmart أو HP LaserJet 2200؟"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "جاري تهيئة حزمة %s..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr "على الـ %s، ستكون الطّباعة ممكنة فقط."
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr "تعذرت إزالة ملف التهيئة %s للطابعة HPOJ لـ%s!"
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr "الرجاء إزالة أي ملف يدوياً وإعادة تشغيل HPOJ."
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "جاري التأكد من الجهاز و تهيئة %s..."
-
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "أي طابعة تريد إعدادها باستخدام HPLIP؟"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "تثبيت حزم SANE..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr "لن يكون المسح ممكنا على الـ %s."
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr "استخدام وصيانة %s الخاص بك"
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "جاري تثبيت حزم mtools"
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "الوصول إلى بطاقة الذاكرة الصّوريّة على %s لن يكون ممكناً."
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "جاري المسح على جهاز HP متعدد الوظائف"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "الوصول إلى بطاقة الذاكرة على جهاز HP متعدد الوظائف"
-
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr "تهيئة الجهاز..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "جاري جعل منفذ الطابعة متوفراً لـCUPS..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "جاري قراءة قاعدة بيانات الطابعات..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "أدخل اسم الطابعة و التعليقات"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "اسم الطابعة يجب أن يحتوي فقط على حروف و أرقام و شارطات تحتية"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"الطابعة \"%s\" موجودة مسبقاً،\n"
-"هل تريد فعلاً الكتابة فوق التهيئة الخاصة بها؟"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-"اسم الطابعة \"%s\" يحتوي أكثر من 12 حرفاً والذي قد يجعل الطابعة غير قابلة "
-"للوصول من عملاء ويندوز. هل تريد فعلاً استخدام هذا الاسم؟"
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"كل طابعة تحتاج إلى اسم (مثال \"printer\"). حقول الوصف و المكان ليس من "
-"الضروري ملؤها. انها مجرد ملاحظات للمستخدمين."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "اسم الطابعة"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "الوصف"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "المكان"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "جاري تحضير قاعدة بيانات الطابعات..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "طراز الطابعة الخاصة بك"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"قام Printerdrake بمقارنة اسم الطراز الناتج عن التحقق الآلي من الطابعات مع "
-"الطرازات الموجودة في قاعدة بيانات الطابعات للحصول على أفضل توافق. هذا "
-"الإختيار قد يكون خاطئاً، خصوصاً إذا كانت الطابعة غير موجودة اطلاقاً في قاعدة "
-"بيانات الطابعات. لذا تأكد اذ كان اختيارك صحيحاً و اضغط \"الطراز صحيح\"، أما "
-"ان لم يكن الطاز صحيحاً، اضغط \"اختر الطراز يدوياً\" كي يتسنى لك اختيار طراز "
-"طابعتك يدوياً على الشاشة التالية.\n"
-"\n"
-"لطابعتك وجد Printerdrake:\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "الطراز صحيح"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "تم اختيار النّموذج يدويًّا"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"الرجاء التأكّد من قيام Printerdrake باكتشاف طراز طابعتك بشكل صحيح.  اعثر على "
-"الطراز الصحيح إذا تم اختيار طراز خطأ أو \"طابعة خام\"."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "تثبيت ملفّ PPD موفّرا من عند الصّانع."
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr "تُقدّم كلّ طابعة PostScript مع ملفّ PPD والذي يصف مزايا وخيارات الطّابعة."
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"يكون هذا الملفّ في مكان ما على القرص المدمج مع مُشغّلات ويندوز وماك المُزوّدة مع "
-"طابعتك."
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr "يمكنك العثور على ملفّات PPD أيضاً على مواقع وب للمُصنّع."
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"إن كان ويندوز مثبتاً لديك، يمكنك أن تعثر على ملف PPD على تجزيء ويندوز أيضاً."
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-"تثبيت ملف PPD للطّابعة واستخدامه عند إعداد الطابعة يجعل كلّ خيارات الطّابعة "
-"متوفّرة والتي هي مُزوّدة من قبل عتاد الطّابعة"
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"يمكنك هنا اختيار ملفّ PPD لتثبيته على ماكينتك، سوف يستخدم بعد ذلك لإعداد "
-"طابعتك."
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "تثبيت ملف PPD من"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "القرص المرن"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "مكان آخر"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "اختيار ملف PPD"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "ملفّ PPD %s غير موجود أو غير قابل للقراءة!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "ملف PPD %s لا يطابق مواصفات PPD!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "جاري تثبيت ملف PPD..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "إعداد OKI WinPrinter"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"أنت تقوم بتهيئة طابعة OKI laser winprinter. هذه الطابعات\n"
-"تستخدم بروتوكول اتصالات خاص و لذا فهي تعمل فقط عندما تكون متصلة بالمنفذ "
-"المتوازي الأول. عندما تكون الطابعة متصلة بمنفذ آخر أو بخادم طباعة فمن فضلك "
-"قم بتوصيل الطابعة إلى المنفذ المتوازي الأول قبل أن تطبع صفحة اختبارية. ان لم "
-"تفعل ذلك فلن تعمل الطابعة. إعداد نوع الوصلة سيتم تجاهله من المشغّل."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "إعداد Lexmark Inkjet"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"مشغلات طابعتك inkjet التي تم توفيرها من Lexmark تدعم الطابعات المحلية فقط، "
-"لا يدعم المُشغّل الطابعات على الماكينات البعيدة أو خادمات الطباعة. فضلاً وصل "
-"طابعتك إلى منفذ محلي أو قم بتهيئتها على الماكينة المرتبطة بها."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"كي تكون قادراً على الطّباعة باستخدام Lexmark inkjet وهذه التّهيئة، تحتاج إلى "
-"مُشغّلات طابعة inkjet التي تزوّدها Lexmark (http://www.lexmark.com/). اضغط على "
-"رابط \"Drivers\". ثمّ اختر الطّراز وأختر\"لينكس\" كنظام تشغيل. تكون برامج "
-"التّعريف على شكل حزم RPM أو شيفرة صدفة مع تثبيت رسوميّ تفاعليّ. لا تحتاج للقيام "
-"بهذه التّهيئة باستخدام الواجهات الرّسوميّة. قم بالإلغاء مباشرة بعد اتّفاقيّة "
-"التّرخيص. ثم اطبع صفحات محاذاة رأس الطّباعة باستخدام \"lexmarkmaintain\" و "
-"اضبط وضع محاذاة الرّأس باستخدام هذا البرنامج."
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "إعداد Lexmark X125"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"مشغّل هذه الطّابعة يدعم فقط الطّابعات المحلّية المتّصلة عبر USB، لا الطّابعات على "
-"الأجهزة البعيدة أو خادمات الطباعة. رجاء توصيل طابعتك إلى منفذ USB المحلّي أو "
-"هيّئها على الجهاز الذي هي متّصلة به."
-
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "تهيئة سامسونج ML/QL-85G"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"مشغّل هذه الطّابعة يدعم فقط الطّابعات المحلّية المتّصلة عبر المنفذ المتوازي "
-"الأول، لا الطّابعات على الماكينات البعيدة أو خادمات الطباعة أو المنافذ "
-"المتوازية الأخرى. رجاء وصل طابعتك إلى المنفذ المتوازي الأول  أو تهيئتهاعلى "
-"الجهاز الذي هي متّصلة به."
-
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "تهيئة Canon LBP-460/660"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "تحميل Firmware لطابعة LaserJet 1000"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"إعدادات الطابعة الإفتراضية\n"
-"\n"
-"يجب عليك التأكد إذا كان حجم الصفحة و نوع الحبر/وضع الطباعة (ان وجد) بالإضافة "
-"إلى إعدادات العتاد لطابعات الليزر (الذاكرة، وحدات الدوبلكس، المنصات "
-"الإضافية) معدّة بشكل صحيح. لاحظ أن جودة طباعة عالية جداً قد تجهل الطباعة بطيئة."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "إعدادات الطابعة الإفتراضية"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "الخيار %s يجب أن يكون رقما صحيحاً!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "الخيار %s يجب أن يكون رقماً!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "الخيار %s خارج المتوسط!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"هل تريد تعيين هذه  الطابعة (\"%s\")\n"
-"كطابعة افتراضية؟"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "صفحات اختبارية"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"الرجاء اختيار الصفحات الإختبارية التي تود طباعتها.\n"
-"ملحوظة: الصفحة الإختبارية لصورة ستستغرق وقتاً طويلاً لطباعتها و على طابعات "
-"الليزر بكمية ذاكرة قليلة قد لا يتم طباعتها مطلقاً. في أغلب الأحيان يكفي أن "
-"تطبع الصفحة الإختبارية القياسية."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "لا صفحات اختبارية"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "طباعة"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "صفحة اختبارية قياسية"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "صفحة اختبارية بديلة (Letter("
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "صفحة اختبارية بديلة (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "صفحة اختبارية لصورة"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "لا تطبع أي صفحات اختبارية"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "طباعة الصفحات الإختبارية..."
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr "جاري تخطّي صفحة الصّورة الاختبارية"
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"تم ارسال الصفحات الإختبارية إلى الطابعة.\n"
-"قد يستغرق هذا بعض الوقت حتى تبدأ الطابعة.\n"
-"حالة الطباعة:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"تم ارسال الصفحات الإختبارية إلى الطابعة.\n"
-"قد يستغرق هذا بعض الوقت حتى تبدأ الطابعة.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "هل عملت بالشكل الصحيح؟"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "طابعة خام"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"لطباعة ملف من سطر الأوامر يمكنك أن تستخدم الأمر \"%s <file>\" أو أن تستخدم "
-"أداة طباعة رسومية: \"xpp <file>\" أو \"kprinter <file>\". الأدوات الرسومية "
-"تسمح لك باختيار الطابعات و تعديل خياراتها بسهولة.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"يمكنك استخدام هذه الأوامر أيضاً في حقل \"أمر الطباعة\" في مربعات حوار الطباعة "
-"في العديد من التطبيقات، لكن لا تقم هنا بإعطاء اسم الملف لأن الملف المطلوب "
-"طباعته يتم اعطاؤه من قبل التطبيق.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"الأمر \"%s\" يسمح لك كذلك يتعديل إعدادات الخيارات لوظيفة طباعة محددة. بكل "
-"بساطة أضف الإعداد المطلوب إلى سطر الآوامر، مثال \"%s <file>\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"للمعرفة حول الخيارات المتوفرة للطابعة الحالية، إما أن تقرأ القائمة أدناه و "
-"اضغط \"قائمة خيارات الطابعة\".%s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"هذه قائمة بالخيارات المتوفرة للطباعة على الطابعة الحالية:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr "لطباعة ملف من سطر الأوامر استخدم الأمر \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"يمكنك استخدام هذا الأمر أيضاً في حقل \"أمر الطباعة\" في مربعات حوار الطابعة "
-"في العديد من التطبيقات. لكن هنا لا تقم بإعطاء اسم الملف لأن ملف الطباعة يتم "
-"توفيره عن طريق التطبيق.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"للحصول على قائمة بالخيارات المتوفرة للطابعة المختارة اضغط على زر \"قائمة "
-"خيارات الطابعة\"."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr "لطباعة ملف من سطر الأوامر استخدم الأمر \"%s <file> أو \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"يمكنك كذلك استخدام البرنامج الرسومي \"xpdq\" لتعيين الخيارات و التعامل مع "
-"وظائف الطباعة.\n"
-"إذا كنت تستعمل كيدي كبيئة سطح مكتب فلديك أيقونة \"للطوارئ\"، اسمها \"STOP "
-"Printer!\"، تقوم بإيقاف كل وظائف الطباعة فوراً عند النقر عليها. هذا المثال "
-"مفيد للحالات التي يحصل فيها تعثر في استخدام الورق.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"الأوامر \"%s\" و \"%s\" تسمح لك بتعديل إعدادات الخيارات لوظيفة طباعة محددة. "
-"ببساطة قم بإضافة الإعداد المطلوب إلى سطر الآوامر، مثال \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "بطاقات الطباعة/المسح الضوئي/الصور على \"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "جاري الطباعة/المسح على \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "الوصول لبطاقة الطباعة/الصور على \"%s\""
-
-#: printer/printerdrake.pm:3896
-#, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "استخدام/صيانة الطابعة \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "جاري الطباعة على الطابعة \"%s\""
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "قائمة خيارات الطابعة"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-"%s الخاصة بك مُعدّة باستخدام برنامج مُشغّل HP HPLIP. بهذه الطريقة تكون العديد من "
-"مزايا طابعتك الخاصة مدعومة.\n"
-"\n"
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-"يمكن استخدام الماسح الضوئي في طابعتك بواسطة برنامج SANE الاعتيادي، على سبيل "
-"المثال Kooka أو XSane (كلاهما في قائمة الوسائط المتعددة/الرسوم)."
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-"تشغيل Scannerdrake )العتاد/الماسح الضوئي في مركز تحكم ماندريبا لينكس) "
-"لمشاركة الماسح الضوئي على الشبكة.\n"
-"\n"
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-"يمكن الوصول إلى قارئات بطاقة الذاكرة في طابعتك كجهاز تخزين USB الكمّي "
-"الاعتيادي."
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-"بعد إضافة بطاقة يجب أن تظهر أيقونة قرص صلب على سطح المكتب للوصول إلى "
-"البطاقة.\n"
-"\n"
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-"يمكن الوصول إلى قارئات بطاقات الذاكرة في طابعتك باستخدام صندوق أدوات طابعة "
-"HP (القائمة: النظام/المراقبة/صندوق أدوات طابعة HP) بالضغط على زر \"الوصول "
-"إلى بطاقات الصور...\" في تبويب \"الوظائف\"."
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-"لاحظ أن هذا بطيء جداً، أما قراءة الصور من الكاميرا أو قارئ بطاقات USB فتكون "
-"عادة أسرع.\n"
-"\n"
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-"يوفّر صندوق أدوات طابعة HP (القائمة: النظام/المراقبة/صندوق أدوات طابعة HP) "
-"الكثير من وظائف مراقبة حالة وصيانة %s الخاصة بك:\n"
-"\n"
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr " - معلومات مستوى/وضع الحبر\n"
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr " - تنظيف فوهة الحبر\n"
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr " - محاذاة رأس الطباعة\n"
-
-#: printer/printerdrake.pm:3944
-#, c-format
-msgid " - Color calibration\n"
-msgstr " - مُعايرة الألون\n"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"الجهاز المتعدد الوظائف الخاص بك تمت تهيئته آلياً ليتمكن من المسح الضوئي. "
-"يمكنك الآن استخدام المسح الضوئي باستخدام \"scanimage\" (\"scanimage -d hp:%s"
-"\" لتحديد الماسح الضوئي إذا كان لديك أكثر من واحد) من سطر الأوامر أو "
-"بالبرامج الرسومية \"xscanimage\" أو \"xsane\". إذا كنت تستخدم GIMP، يمكنك "
-"أيضاً المسح الضوئي باستخدام القوائم \"File\"/\"Acquire\". تشغيل الأمر \"man "
-"scanimage\" في سطر الأوامر للحصول على مزيد من المعلومات.\n"
-"\n"
-"لا تحتاج لتشغيل \"scannerdrake\" لإعداد المسح الضوئي على هذا الجهاز، وتحتاجه "
-"فقط لاستخدام \"scannerdrake\" إن كنت تريد مشاركة الماسح الضوئي على الشبكة.."
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"تم تهيئة الطابعة آلياً لكي تعطيك القدرة على الوصول إلى سواقات بطاقات الصور "
-"على جهازك الشخصي. يمكنك الآن الوصول إلى بطاقات الصور باستخدام البرنامج "
-"الرسومي \"MToolsFM\" (القائمة: \"تطبيقات\" -> \"أدوات الملفات\" -> \"مدير "
-"ملفات MTools\") أو باستخدام أدوات \"mtools\" في سطر الأوامر (أدخل \"man "
-"mtools\" في سطر الأوامر لمزيد من المعلومات). يمكنك ايجاد نظام ملفات البطاقة "
-"تحت حرف السواقة \"p:\"، أو حروف السواقات الأخرى إذا كانت لديك أكثر من طابعة "
-"HP مع سواقات بطاقات صور. في \"MToolsFM\" يمكنك التحويل بين حروف السواقات على "
-"الحقل الموجود في الركن الأيسر إلى الأعلى في قوائم الملفات."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "نقل تهيئة الطابعة"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"يمكنك نقل تهيئة الطابعة التي تم عملها للـSpooler %s إلى %s، الـspooler "
-"الحالي. كل بيانات التهيئة (اسم الطابعة، الوصف، المكان، نوع الوصلة، و خيارات "
-"الإعداد الإفتراضي) يتم أخذها، لكن لن يتم نقل الوظائف.\n"
-"لا يمكن نقل كل الصفوف للأسباب التالية:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS لا يدعم الطابعات على أجهزة Novell الخادمة أو الطابعات التي ترسل "
-"البيانات إلى أمر ذي نسق حر.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ يدعم فقط الطابعات المحلية و طابعات LPD البعيدة و طابعات Socket/TCP.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD و LPRng لا تدعم طابعات IPP.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"بالإضافة إلى ذلك، فإن الصفوف التي لم يتم عملها بهذا البرنامج أو \"foomatic-"
-"configure\" لا يمكن نقلها."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"أيضاً الطابعات المهيئة بملفات PPD من مصنّعيها أو بمشغلات CUPS الخاصة بها لا "
-"يمكن نقلها."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"علّم على الطابعات التي تريد نقلها ثم اضغط \n"
-"\"انقل\"."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "لا تنقل الطابعات"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "نقل"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"الطابعة المسماة \"%s\" موجودة مسبقا تحت %s. \n"
-"اضغط \"انقل\" للكتابة فوقه.\n"
-"يمكنك كذلك كتابة اسم جديد أو تحطي هذه الطابعة."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "اسم الطابعة الجديدة"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "نقل %s..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"لقد قمت بنقل الطابعة الإفتراضية السابقة (\"%s\")، هل يجب أيضاً أن تكون "
-"الطابعة الإفتراضية تحت نظام الطباعة الجديد %s؟"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "إعادة تحميل بيانات الطابة..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "بدء الشبكة..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "تهيئة الشبكة الآن"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "لم يتم تحديد وظيفية الشبكة"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"أنت على وشك تهيئة طابعة بعيدة. هذا يحتاج إلى أن تكون وصلة الشبكة تعمل و لكن "
-"الشبكة لم يتم إعدادها حتى الآن. إذا كنت تريد المتابعة دون تهيئة الشبكة، "
-"ستكون قادراً على استخدام الطابعة التي تقةم بتهيئتها الآن. كيف تريد المتابعة؟"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "تابع دون تهيئة الشبكة"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"لا يمكن بدء تهيئة الشبكة التي تم عملها أثناء التثبيت الآن. الرجاء التأكّد إذا "
-"كان يمكن الوصول إلى الشبكة بعد إقلاع نظامك وصحّح التهيئة باستخدام مركز تحكم %"
-"s، في قسم \"الشبكة و الإنترنت\"/\"الوصلات\"، و بعد ذلك قم بتهيئة الطّابعة، "
-"كذلك باستخدام مركز تحكم %s، في قسم \"العتاد\"/\"الطابعة\""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"الوصول إلى الشبكة لا يعمل و لم يمكن بدؤه. الرجاء التأكّد من التهيئة لديك و "
-"العتاد الخاص بك. ثم حاول تهيئة الطابعة البعيدة مرة أخرى."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "جاري إعادة تشغيل نظام الطباعة..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "مرتفع"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "مذعور"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "جاري تثبيت نظام طباعة في مستوى الأمن %s"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"أنت على وشك تثبيت نظام الطباعة %s على نظام يعمل على المستوى الأمني %s.\n"
-"\n"
-"نظام الطباعة يشغّل مراقب (عملية خلفية) والذي يقوم بانتظار وظائف الطباعة و "
-"يتعامل معها. هذا المراقب يمكن الوصول إليه من قِبل الأجهزة البعيدة عبر الشبكة "
-"ولذا فقد يمكن أن يكون نقطة محتملة للهجمات. لهذا يتم اختيار القليل من "
-"الخادمات لتشغيلها افتراضياً على هذا المستوى الأمني.\n"
-"\n"
-"هل تريد فعلاً تهيئة الطباعة على هذ الجهاز؟"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "بدء نظام الطباعة عند الإقلاع"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"نظام الطباعة (%s) لن يتم بدؤه بشكل آلي عند بدء تشغيل الماكينة.\n"
-"\n"
-"من الممكن أن يكون قد تم تعطيل البدء الآلي بسبب التغيير إلى مستوى أعلى لأن "
-"نظام الطباعة قد يكون نقطة مبدئية لهجمات المخترقين.\n"
-"\n"
-"هل تريد تمكين البدء الآلي لنظام الطباعة عند بدء التشغيل مرة أخرى؟"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "جاري التأكد من البرامج المثبتة..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "جاري إزالة %s ..."
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "لم يمكن إزالة نظام طباعة %s!"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "تثبيت %s ..."
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "لم يمكن تثبيت نظام طباعة %s!"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"في هذا الوضع لن يكون هناك نظام طباعة محلي، وستذهب كل طلبات الطباعة إلى "
-"الخادم المحدد أدناه. لاحظ أنّه ليس ممكناً تعريف صافّات طباعة محلّيّة وفي حال كان "
-"الخادم مُعطّلاً فلن يمكن الطباعة مطلقاً من هذه الماكينة."
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-"أدخل اسم المضيف أو IP خادم CUPS وثم اضغط موافق إن كنت تريد استخدام هذا "
-"الوضع، وإلا فاضغط \"خروج\"."
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "اسم أو IP الخادم البعيد:"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "تعيين الطابعة الإفتراضية..."
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "نظام طباعة CUPS أو خادم CUPS بعيد؟"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr "يمكن استخدام نظام طباعة CUPS بطريقتين:"
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr "1. يمكن تشغيل نظام طباعة CUPS محلياً."
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-"ثم استخدام الطابعات المتصلة محلياً  والخادمات CUPS الأخرى في نفس الشبكة يتم "
-"اكتشافها تلقائياً."
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-"عيب هذه الطريقة هو الحاجة إلى المزيد من المصادر على الماكينة نفسها. يجب "
-"تثبيت حزم برامج إضافية، وأن يعمل عفريت CUPS في الخلفية ويحتاج إلى بعض "
-"الذاكرة، ويتم فتح منفذ IPP (المنفذ 631)."
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr "2. طلبات الطباعة كلها يتم إرسالها مباشرة إلى خادم CUPS البعيد."
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-"استخدام المصادر المحلية هنا مُقلّص إلى أدناه. لا عفريت CUPS يعمل أو منفذ "
-"مفتوح، ولا تثبيت لبنية برنامج تحتيّة لإعداد صافّات الطباعة المحليّة، لذا يستخدم "
-"حجم تخزين وذاكرة أقل."
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-"العيب هو عدم القدرة على تعريف طابعات محليّة ثم إن كان الخادم المحدّد مُعطلاً فلن "
-"يمكن الطباعة مطلقاً من هذه الماكينة."
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr "كيف يجب إعداد CUPS على ماكينتك؟"
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr "خادم بعيد، تحديد الاسم أو IP هنا:"
-
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr " نظام الطّباعة CUPS المحلي"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "اختيار Spooler للطابعة"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "أي نظام طباعة (spooler( تريد أن تستخدم؟"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "تعذرت تهيئة الطابعة \"%s\"!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "تثبيت Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "تعذر تثبيت حزم %s، لا يمكن إطلاق %s !"
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"تمت تهيئة الطابعات الآتية. اضغط مرّتين على الطابعة لتغيير إعداداتها؛ لجعلها "
-"طابعة افتراضية؛ أو لرؤية معلومات حولها."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "عرض كل طابعات CUPS البعيدة المتوفرة"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "إنعاش قائمة الطابعات (لعرض كل طابعات CUPS البعيدة المتوفرة)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "تهيئة CUPS"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "تغيير نظام الطباعة"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "وضع عادي"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "وضعية الخبير"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "خيارات الطابعة"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "تعديل إعدادات الطابعة"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"الطابعة %s %s\n"
-"هل تريد تعديل هذه الطابعة؟"
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "هذه الطابعة مُعطّلة عن العمل"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "تنفيذ!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "نوع وصلة الطابعة"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "اسم الطابعة، وصف، المكان"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "مصنّع الطابعة، الطراز، المشغّل"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "مصنّع الطابعة، الطراز"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "تعيين هذه الطابعة كطابعة افتراضية"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "تمكين الطابعة"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "تعطيل الطابعة"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "طباعة صفحات اختبارية"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "تعلم كيف تستخدم هذه الطابعة"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "إزالة الطابعة"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "إزالة الطابعة القديمة \"%s\" ..."
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "تم الآن تمكين الطابعة \"%s\"."
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "تمّ الآن تعطيل الطابعة \"%s\"."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "هل تريد فعلاً إزالة الطابعة \"%s\"؟"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "جاري ازالة الطابعة \"%s\" ..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "الطابعة الإفتراضية"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "تم تعيين الطابعة \"%s\" كطابعة افتراضية الآن."
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "لا أستطيع إضافة تجزيء للـRAID _المنسّق_ %s"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "التجزيئات ليست كافية لمستوى RAID %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "تعذر إنشاء الدّليل /usr/share/sane/firmware !"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "تعذر إنشاء الوصلة /usr/share/sane/%s !"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr "لم يمكن نسخ ملف firmware %s إلى /usr/share/sane/firmware!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "لم يمكن تحديد صلاحيات ملف firmware %s!"
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr "لم يمكن تثبيت الحزم المطلوبة لمشاركة الماسحات الضّوئيّة."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr "لن تكون ماسحاتك الضّوئيّة متوفّرة للمستخدمين غير الجذر."
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "قبول/رفض رسائل أخطاء IPv4 الزّائفة."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr " قبول/رفض صدى بثّ icmp"
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr " قبول/رفض صدى icmp"
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "سماح/منع الدخول التلقائي"
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"تحديد \"الكل\"، يسمح بوجود /etc/issue و /etc/issue.net.\n"
-"\n"
-"تحديد لا شيء، لن يسمح بأيّ مسائل.\n"
-"\n"
-"وإلا يسمح فقط بوجود /etc/issue."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "سماح/منع إعادة التّشغيل بواسطة مستخدم الشّاشة الطّرفيّة."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "سماح/منع دخول المستخدم الجذر من بعيد."
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "سماح/منع دخول المسخدم root المباشر."
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr "سماح/منع سرد أسماء المستخدمين على النّظام في مُدراء العرض (kdm وgdm(."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-"سماح/منع تصدير العرض عند\n"
-"المرور من حساب المستخدم الجذر إلى المستخدمين الآخرين.\n"
-"\n"
-"راجع pam_xauth(8) للمزيد من التّفاصيل."
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"سماح/منع اتّصالات X:\n"
-"\n"
-"- ALL (كل الاتّصالات مسموحة),\n"
-"\n"
-"- LOCAL (فقط الاتّصالات من الجهاز المحلّي),\n"
-"\n"
-"- NONE (لا اتصال)."
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"يصف المُعطى إن كان العملاء مُخوّلين للاتّصال\n"
-"إلى خادم X من الشّبكة عبر منفذ tcp 6000 أم لا."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"تمكين الصلاحية:\n"
-"\n"
-"- لكل الخدمات التي يتم التحكم بها عن طريق tcp_wrappers (انظر صقحة دليل hosts."
-"deny(5) )إذا تم التعيين إلى \"ALL\"،\n"
-"\n"
-"- الملفات المحلية فقط إذا تم التعيين إلى \"LOCAL\"\n"
-"\n"
-"- لا شئ إذا تم التعيين إلى \"NONE\".\n"
-"\n"
-"لتمكين صالحية الخدمات التي تريدها، استخدم ملف /etc/hosts.allow (انظر hosts."
-"allow(5))."
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"إذا كان SERVER_LEVEL (أو SECURE_LEVEL في حال عدم وجود الأول)\n"
-"أكبر من 3 في /etc/security/msec/security.conf، و ينشئ\n"
-"الاختصار /etc/security/msec/server لتشير\n"
-"إلى /etc/security/msec/sever.<SERVER_LEVEL>.\n"
-"\n"
-"ملف /etc/security/msec/server يتم استخدامه عن طريق أمر chkconfig --add "
-"لتقرير إضافة خدمة إذا كانت موجودة في في الملف أثناء تثبيت\n"
-"الحزم."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"تمكين/تعطيل crontab و at للمستخدمين.\n"
-"\n"
-"ضع المستخدمين المُخوّلين في /etc/cron.allow و /etc/at.allow (راجع man at(1)\n"
-"و crontab(1))."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr "تمكين/تعطيل تقارير syslog إلى الشّاشة الطّرفيّة 12"
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"تمكين/تعطيل الحماية من خداع ترجمة الاسم. إن\n"
-"كان \"%s\" مُحدّداً، يرسل تقريراً إلى syslog أيضاً."
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "تنبيهات أمنية:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "تمكين/تعطيل حماية IP spoofing"
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "تمكين/تعطيل libsafe إن كان موجوداً على النّظام."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "تمكين/تعطيل تسجيل رزم IPv4 الغريبة."
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "تمكين/تعطيل اختبارات msec الأمنية كل ساعة"
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-" تمكين استخدام su من قبل أعضاء مجموعة العجل أو السّماح باستخدام su من قبل أي "
-"مستخدم."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "استخدم كلمة المرور لمواثقة المستخدمين."
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr "تنشيط/تعطيل التحقّق من وضع عدم شرعيّة بطاقات ethernet."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr "تمكين/تعطيل التحقّق اليومي من الأمن."
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr " تمكين/تعطيل sulogin(8) في مستوى المستخدم الفردي."
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr "إضافة الاسم كاستثناء للتعامل مع تحديد عمر كلمة المرور بواسطة msec."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-"تحديد عمر كلمة المرور على \"الأقصى\" أيّاماً وتأخير التغيير إلى \"غير فعّال\"."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr "تحديد طول تاريخ كلمة المرور لمنع إعادة استخدامها."
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr "تحديد طول كلمة المرور الأدنى وأقل عدد أرقام وأقل عدد أحرف استهلاليّة."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "تعيين umask الخاص بالمستخدم الجذر"
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "إن كانت القيمة نعم، التحقق من المنافذ المفتوحة."
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"إن كانت القيمة نعم، تحقق من :\n"
-"\n"
-"- كلمات المرور الفارغة،\n"
-"\n"
-"- عدم وجود كلمة مرور في /etc/shadow\n"
-"\n"
-"- وجود مستخدمين برقم معرف 0 غير المستخدم الجذر."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr "إن كان القيمة نعم، التحقق من أذون الملفّات في أدلّة المستخدمين المنزلية."
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr "إن كانت القيمة نعم، التحقق إن كانت أجهزة الشبكة في وضع promiscuous."
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "إن كانت القيمة نعم، تشغيل تحقيق الأمن اليومي."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "إن كانت القيمة نعم، التحقق من إضافة/إزالة ملفات sgid."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "إن كانت القيمة نعم، التحقق من كلمات المرور الفارغة في /etc/shadow."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "إن كانت القيمة نعم، التحقق من checksum لملفات suid/sgid."
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "إن كانت القيمة نعم، التحقق من إضافة/إزالة ملفات suid للجذر."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "إن كانت القيمة نعم، عمل تقرير بالملفات الغير مملوكة."
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "إن كانت القيمة نعم، التحقق من الملفّات/الأدلة القابلة الكتابة للجميع."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "إن كانت القيمة نعم، تشغيل تحقيقات chkrootkit."
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"إن كانت معيّنة، إرسال تقرير البريد إلى عنوان البريد الالكتروني هذا وإلا "
-"إرسالها إلى الجذر."
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "إن كانت القيمة نعم، تقرير نتيجة التحقيق بالبريد."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "عدم إرسال رسائل إن لم يكن هناك شيء للتحذير عنه"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "إن كانت القيمة نعم، تشغيل بعض التحقيقات حول قاعدة بيانات rpm."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "إن كانت القيمة نعم، تقرير نتيجة التحقيق إلى syslog."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "إن كانت القيمة نعم، تقرير نتيجة التحقيق إلى tty."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr "تحديد حجم تاريخ أوامر الصّدفة. القيمة -1 تعني غير محدود."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "تحديد وقت انتهاء الصّدفة. القيم صفر تعني لا وقت انتهاء."
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "وحدة وقت الخروج هي الثّانية"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "تحديد umask الخاص بالمستخدم."
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "قبول رسائل خطأ IPv4 الوهمية"
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "قبول broadcasted icmp echo"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "قبول صدى icmp"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* موجودة"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "إعادة الإقلاع بطرفية المستخدم"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "السماح بدخول المستخدم الجذر من بعيد"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "دخول المستخدم الجذر مباشر"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr "سرد أسماء المستخدمين على مُدراء العرض (kdm وgdm("
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr "تصدير العرض عند المرور من المستخدم الجذر إلى المستخدمين الآخرين"
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "السماح باتّصالات نافذة X"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "تخويل اتصالات TCP إلى نافذة X"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "تخويل كلّ الخدمات التي يتحكّم بها tcp_wrappers"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "يُطيع chkconfig أحكام msec"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "تمكين \"crontab\" و \"at\" للمستخدمين"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "يرسل syslog التّقارير إلى الشّاشة الطرفيّة 12"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "الحماية من خداع حلّ الاسم"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "تمكين الحماية من خداع IP"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "تمكين libsafe إن كان موجوداً على النّظام"
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "تمكين تسجيل حزم IPv4 الغريبة"
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "تمكين اختبارات msec الأمنية كل ساعة"
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr "تمكين استخدام su من قبل أعضاء مجموعة العجل أو لأيّ مستخدم"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "استخدم كلمة المرور للمصادقة على المستخدمين"
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "التحقّق من عدم شرعيّة بطاقات ethernet"
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "مراقبة أمنية يومية"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "Sulogin(8) في مستوى المستخدم الوحيد"
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "بدون تحديد عُمْر لكلمة المرور لـ"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr "تحديد انتهاء صلاحية كلمة المرور وتأخيرات عدم النّشاط"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "سجلّ طول كلمة المرور"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "طول كلمة المرور الأدنى وعدد الأرقام والحروف الاستهلاليّة"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "umask الخاص بالمستخدم الجذر"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "حجم سجلّ shell"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "انتهاء وقت shell"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "umask للمستخدم"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "تحقّق من المنافذ المفتوحة"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "تحقّق من الحسابات الغير مؤمّنة"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "تحقّق من صلاحيات الملفّات في دليل منزل المستخدمين"
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "تحقّق إن كانت أجهزة الشّبكة في وضع غير شرعيّ"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "تشغيل الاختبارات الأمنية اليومية"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "تحقق من اضافات/حذف ملفات sgid"
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "تحقق من وجود كلمة مرور فارغة في /etc/shadow."
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "تحقّق من checksum للملفّات suid/sgid"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "تحقّق من الإضافات/الإزالات لملفّات suid الجذريّة"
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "قم بتقرير الملفات الغير مملوكة"
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "تحقّق من الملفّات/الأدلّة التي يمكن الكتابة عليها بواسطة الكلّ"
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "تشغيل اختبارات chkrootkit"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "لا تبعث رسائل بدون حاجة"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"عند التعيين، أرسل التقرير بالبريد إلى هذا العنوان أو قم بإرساله إلى المستخدم "
-"الجذر"
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "أرسل تقرير نتيجة الفحص بالبريد"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "أجرِ بعض الفحوصات على قاعدة بيانات rpm"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "أرسل تقرير بنتيجة الاختبار إلى syslog"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "يقوم بتقرير نتيجة الاختبار إلى الطرفية"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "مرحبا بالمخترقين"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "فقير"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "مرتفع"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "أكثر ارتفاعاً"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "مذعور"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"يجب استخدام هذا المستوى الأمني بحذر. فهو يجعل نظامك أسهل في الإستخدام،\n"
-"لكن يكون حساساً جداً. لذا لا يجب استخدامه لماكينة متصلة بماكينات أخرى\n"
-"أو إلى الإنترنت. لا يوجد دخول بكلمة المرور."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "كلمات المرور ممكّنة الآن، لكن الاستخدام كحاسب في شبكة يزال غير مفضّل."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"هذا هو المستوى الأمني القياسي للحاسب الذي سيستخدم للإتصال بالإنترنت كعميل."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"توجد بعض القيود، كما يتم تشغيل برامج للتأكد من النظام أوتوماتيكياً كل ليلة."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"بهذا المستوى الأمني، يكون استخدام هذا النظام كخادم يصبح ممكناً.\n"
-"المستوى الأمني عالٍ بشكل كافي لاستخدام هذا النظام كخادم يستطيع قبول\n"
-"اتصالات من عملاء كثيرين. ملحوظة: إذا كانت ماكينتك مجرد عميل على الإنترنت "
-"فالأجدر بك اختيار مستوى أمني أقل."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"هذا مماثل للمستوى السابق، و لكن النظام مغلق كلياً و المزايا الأمني على حدها "
-"الأقصى."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "خيارات DrakSec الأساسية"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "الرجاء اختيار مستوى الأمن الذي تريده"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "مستوى الأمن"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "استخدام libsafe للخادمات"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "مكتبة تحمي من هجمات buffer overflow و format string"
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "مدير النظام (اسم الدخول أو البريد الألكتروني)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "تشغيل نظام الصوت ALSA (بناء صوت لينكس المتقدّم)"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron أداة لتشغيل الأوامر في أوقات محددة."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"تُستخدم apmd لمراقبة حالة البطارية و تسجيلها عن طريق syslog.\n"
-"يمكن كذلك استخدامها لإغلاق الجهاز عند ضعف البطارية."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"تتشغيل الأوامر المُجدولة عن طريق أمر at عند الوقت المحدد\n"
-"لتشغيل at، و تقوم بتشغيل الأوامر الدقعية عندما يكون متوسط الحِمْل قليلاَ."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron هو برنامج يونكس القياسي لتشغيل البرامج المحددة من قبل المستخدم\n"
-"عند أدوقات محددة دورياً. vixie cron يضيف عدداً من المزايا إلى يونكس\n"
-"cron الأساسي، بما فيها حماية أمنية أفضل، و خيارات تهيئة أقوى."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"FAM هي خدمة مراقبة الملفّات. إنها تستخدم للحصول على تقارير عن تغيّر الملفّات.\n"
-"إنّها تستخدم من قبل جينوم وكيدي"
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"يقوم GPM بإضافة دعم الماوس لتطبيقات لينكس في الوضع النصي مثل\n"
-"Midnight Commander. إضافة إلى ذلك فإنه يسمح بعمليات القص و اللصق في سطر "
-"الأوامر،\n"
-"كما يتضمن دعم القوائم المختصرة في سطر الأوامر."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake يقوم بالتحقق من العتاد، و يقوم بتهيئة العتاد\n"
-"الجديد/المتغير بشكل اختياري."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache هو خادم وب. و يُستخدم لخدمة ملفات HTML و CGI."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"مراقب الإنترنت الأساسي (يسمى عادةً بـ inetd) يبدأ\n"
-"مجموعة من خدمات الإنترنت الأخرى عند الحاجة. انه مسؤول عن بدء\n"
-"العديد من الخدمات، بما فيها telnet، ftp، rsh، و rlogin. تعطيل inetd سيعطل\n"
-"كل الخدمات المذكورة."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"شغّل تصفية الرّزم لنواة لينكس من السّلسلة 2.2 كي تُعدّ جداراً ناريّاً لحماية ماكينتك "
-"من هجمات الشّبكة."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"هذه الحزمة تقوم بتحميل خريطة لوحة المفاتيح المختارة كما\n"
-"تم تعيينها في /etc/sysconfig/keyboard. يمكن اختيار لوخة المفاتيح باستخدام "
-"أداة kbdconfig.\n"
-"يجب تركها ممكّنة في أغلب الأجهزة."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"إعادة توليد آلية لترويسة النواة في دليل /boot لـ\n"
-"/usr/include/linux/{autoconf،version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "تحقق و تهيئة آلية للعتاد عند الإقلاع."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf يقوم في بعض الأحيان بالترتيب لعمل بعض الأعمال\n"
-"عند الإقلاع للمحافظة على إعدادات النظام."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd هو مراقب الطباعة الذي يحتاجه أمر lpr للعمل بشل صحيح. أساساً\n"
-"هو خادم يوصل وظائف الطباعة إلى الطابعات."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"خادم لينكس الوهمي، يستخدم لعمل خادم عالي الأداء\n"
-"و يعتمد عليه."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) هو خادم أسماء نطاق (DNS) و الذي يستخدم لمعرفة أسماء المضيفات أو "
-"عناوين IP."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"تقوم بتركيب وفكّ كل أماكن تركيب أنظمة ملفات الشبكة (NFS) و SMB (Lan\n"
-"Manager/ويندوز)، و NCP (NetWare)."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"تقوم بتنشيط/تثبيط كل واجهات الشبكة المهيئة كي تبدأ\n"
-"عند بدء الإقلاع."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS بروتوكول شائع لمشاركة الملفات على شبكات TCP/IP.\n"
-"هذه الخدمة توفر وظائف NFS للأجهزة الخادمة، و التي يتم تهيئتها عن طريق\n"
-"ملف /etc/exports."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS بروتوكول شائع لمشاركة الملفات على شبكات\n"
-"TCP/IP. هذه الخدمة تسمح لك بالتحكم بالملفات عن طريق NFS."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"حوّل آليا إلى قافل المفاتيح numlock فيي سطر الأوامر\n"
-"وXorge عند الإقلاع."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "دعم طابعات OKI 4w و الطابعات المتوافقة."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"دعم PCMCIA مهم لدعم أشياء مثل بطاقات الإيثرنت و\n"
-"المودمات على الأجهزة الدفترية. لن يتم بدء هذه الخدمة الا عند تهيئتها لذا فلا "
-"مسكلة عند تشغيله\n"
-"على الأجهزة التي لا تحتاجه."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"يقوم portmapper بإدارة اتصالات RPC، و التي تستخدم عن طريق\n"
-"بروتوكولات مثل NFS و NIS. خادم portmap من اللازم أن يعمل على الأجهزة\n"
-"التي تعمل كخادمات تستخدم البروتوكولات التي تستفيد من آلية عمل RPC."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix هو عميل لنقل البريد، أي البرنامج الذي ينقل البريد من جهاز إلى آخر."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"لحفظ واستعادة entropy pool للنظام لجودة أعلى\n"
-"لتوليد الأرقام العشوائيّة."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"تعيين الأجهزة الخام إلى أجهزة كتلية (مثل تجزيئات\n"
-"الأقراص الصلبة)، للاستخدام في تطبيقات مثل Oracle أو مشغلات DVD"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"مراقب routed يسمح بتحديث جدول موجّه IP الآلي (IP router table) عن طريق\n"
-"بروتوكول RIP. بينما يستخدم RIP على الشبكات الصغيرة، تحتاج الشبكات الأكبر\n"
-"إلى بروتوكولات توجيه معقدة أكثر."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"بروتوكول rstat يسمح للمستخدمين على الشبكة بجلب\n"
-"احصائيات أداء أي جهاز على هذه الشبكة."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"بروتوكول rusers يسمح للمستخدمين على الشبكة أن يتعرفوا على من\n"
-"سجل الدخول إلى الأجهزة المستجيبة الأخرى."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"بروتوكول rwho يسمح للمستخدمين البعيدين بالحصول على قائمة بكل المستخدمين\n"
-"الذين سجلوا الدخول إلى جهاز يشغّل عفريت rwho (مماثل لـ finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "تشغيل نظام الصوت على جهازك"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog هي الوسيلة التي تستخدمها العديد من المراقبات لتسجيل الرسائل\n"
-"إلى ملفات سجلات عديدة. انها فكرة جيدة أن تقوم دائماً بتشغيل syslog."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "تحميل مشغلات أجهزة USB."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "يبدأ خادم خطوط X (هذا واجب لكي يعمل Xorg)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "اختر أي خدمات تريدها أن تبدأ آلياً عند التثبيت"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "الطباعة"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "الإنترنت"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "مشاركة الملفات"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "الإدارة عن بعد"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "خادم قواعد بيانات"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "تعمل"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "متوقفة"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "الخدمات والعفاريت"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"عفواً، لا توجد معلومات\n"
-"اضافية حول هذه الحزمة."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "المعلومات"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "تشغيل عند الطّلب"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "عند الإقلاع"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "تشغيل"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "إيقاف"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>ما هو ماندريبا لينكس؟</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "أهلا بك في <b>ماندريبا لينكس</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-"ماندريبا لينكس هي <b>توزيعة لينكس</b> تشتمل على نواة النظام، المسمى <b>نظام "
-"التشغيل</b> (مبني على نواة لينكس) معاً بالإضافة إلى <b>الكثير من التطبيقات</"
-"b> بما يطابق كل الحاجات التي قد تخطر ببالك."
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"ماندريبا لينكس هي توزيعة لينكس <b>الأسهل استخداماً</b> حالياً. إنها أيضاً واحدة "
-"من <b>أكثر توزيعات لينكس استخداماً</b> حول العالم!"
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>المصدر المفتوح</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "أهلاً بك في <b>عالم المصدر المفتوح</b>!"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"ماندريبا لينكس هو نظام مخلص لنموذج المصدر المفتوح. هذا يعني أن هذا الإصدار "
-"الجديد هو نتاج <b>للتّعاون</b> بين <b>فريق مطوّري ماندريبا</b> و<b>المجتمع "
-"العالمي</b> لمتطوّعي ماندريبا لينكس."
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr "نودّ أن <b>نشكر</b> جميع من شارك في تطوير هذا الإصدار الأخير."
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>رخصة GPL</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-"معظم البرامج المرفقة مع هذه التوزيعة وكل أدوات ماندريبا لينكس مرخّصة ضمن "
-"<b>الرخصة العموميّة الشاملة</b>."
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-"رخصة GPL هي قلب نموذج المصدر المفتوح، حيث تمنح الكُلّ <b>حريّة</b> استخدام "
-"ودراسة وتوزيع وتحسين البرنامج بأي شكل يريدونه، ماداموا يوفرون النتاج بنفس "
-"الطريقة."
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-"الفائدة الرئيسية من هذا هي أن عدد المُطوّرين هو افتراضيا <b>غير محدود</b>، بما "
-"ينتج عنه برامج <b>عالية الجودة</b>."
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>انضمّ إلى المجتمع</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-"لدى ماندريبا لينكس أحد <b>أكبر المجتمعات</b> من المستخدمين والمطورين. دور "
-"مجتمع كهذا هو واسع جداً، بدءً من تقرير العيوب البرمجية ووصولاً إلى تطوير "
-"التطبيقات الجديدة. يلعب المجتمع <b>دوراً أساسياً</b> في عالم ماندريبا لينكس."
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-"كي <b>تقرأ المزيد</b> حول مجتمعنا الديناميكي، رجاء زُر <b>www.mandrakelinux."
-"com</b> أو مباشرة <b>www.mandrivalinux.com/en/cookerdevel.php3</b> إن وددت "
-"<b>المشاركة</b> في التطوير."
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr "<b>نسخة التّنزيل</b>"
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-"تقوم الآن بتثبيت <b>Mandriva Linux Download</b>. هذه هي النسخة المجانية التي "
-"تريد ماندريبا إبقائها <b>متوفّرة للجميع</b>."
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-"نسخة Download <b>لا يمكن أن تحتوي</b> كل التطبيقات التي ليست مفتوحة المصدر. "
-"لذا، لن تجد ما يلي في هذه النسخة:"
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr "\t* <b>المُشغّلات المملوكة</b> (مثل مُشغّلات NVIDIA®، ATI™، إلخ)."
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-"\t* <b>البرامج المملوكة</b> (مثل Acrobat® Reader®، RealPlayer®، Flash™، إلخ)."
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-"لن تستطيع الوصول إلى <b>الخدمات المرفقة</b> في منتجات ماندريبا الأخرى أيضاً."
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr "<b>Discovery، سطح مكتب لينكس الأول</b>"
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr "تقوم الآن بتثبيت <b>Mandriva Linux Discovery</b>."
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery هي توزيعة لينكس <b>الأكثر سهولة</b> و<b>الأكثر ألفة للمستخدم</b>. "
-"تحتوي خيارات منتقاة من <b>البرامج الأوليّة</b> للمكتب، والوسائط المتعددة "
-"ونشاطات الإنترنت. قوائمها مبنية على المهام، مع تطبيق محدد لكل مهمة."
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr "<b>PowerPack، سطح المكتب المُطلق للينكس</b>"
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr "تقوم الآن بتثبيت <b>Mandriva Linux PowerPack</b>."
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-"منتج PowerPack من ماندريبا هو <b>سطح المكتب المُطلق للينكس</b>. يشتمل "
-"PowerPack على <b>الآلاف من التطبيقات</b> - كلّ شيء بدءً من الأكثر شعبية وحتى "
-"الأكثر تقدّماً."
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr "<b>PowerPack+، الحلّ لأسطح المكتب والخادمات</b>"
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr "تقوم الآن بتثبيت <b>Mandriva Linux PowerPack+</b>."
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-"PowerPack+ هي <b>حلّ لينكس متكامل المزايا</b> لأجل <b>الشّبكات</b> الصّغيرة "
-"والمتوسّطة الحجم. تحتوي PowerPack+ على الآلاف من <b>تطبيقات سطح المكتب</b> "
-"واختياراً واسعاً من <b>تطبيقات الخادمات</b> من طرازٍ عالمي."
-
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>منتجات ماندريبا</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-"قامت <b>ماندريبا</b> بتطوير تشكيلة واسعة من منتجات <b>ماندريبا لينكس</b>."
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "منتجات ماندريبا لينكس هي:"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr "\t* <b>Discovery</b>، سطح المكتب الأول."
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr "\t* <b>PowerPack</b>، سطح المكتب المُطلق للينكس."
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr "\t* <b>PowerPack+</b>، حلّ لينكس لأسطح المكتب والخادمات."
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-"\t* <b>ماندريبا لينكس لأنظمة x86-64</b>، حلّ ماندريبا لينكس للحصول على أفضل "
-"نتيجة من معالجات 64بت."
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr "<b>منتجات ماندريبا (منتجات نوماد)</b>"
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-"قامت ماندريبا لينكس بتطوير منتجين يسمحان لك باستخدام ماندريبا لينكس <b>على "
-"أي حاسب</b> ودون الحاجة إلى تثبيته بالفعل:"
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-"\t* <b>Move</b>، توزيعة ماندريبا لينكس تشتغل بالكامل من قرص إقلاع مدمج."
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-"\t* <b>جلوب تروتر</b>، وهي توزيعة ماندريبا لينكس مُتثبيتة مسبقاً على “قرص لاسي "
-"الصلب المُتنقّل” فائق الاندماجيّة."
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "<b>منتجات ماندريبا (الحلول الاحترافيّة)</b>"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr "أدناه هي منتجات ماندريبا المُصمّمة لملائمة <b>احتياجاتك الاحترافيّة</b>:"
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr "\t* <b>سطح المكتب المؤسّساتي</b>، وهو سطح مكتب ماندريبا لينكس للأعمال."
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr "\t* <b>الخادم المؤسّساتي</b>، وهو حلّ خادم ماندريبا لينكس."
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr "\t* <b>الجدار الناري للشبكات المتعدّدة</b>، حلّ الأمن من ماندريبا لينكس."
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>إختيار كيدي</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-"مع Discovery، سوف تتعرّف على <b>كيدي</b>، وهي أكثر <b>بيئة سطح مكتب رسومية</"
-"b> متوفّرة أُلْفَةً للمستخدم."
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-"سيجعل كيدي <b>خطواتك الأولى</b> مع لينكس <b>سهلة للغاية</b> بحيث لا تفكّر "
-"أبداً بتشغيل أيّ نظام تشغيل آخر!"
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-"يشتمل كيدي أيضاً على الكثير من <b>التطبيقات المتكاملة جيّداً</b> مثل Konqueror، "
-"مُتصفّح الإنترنت، وKontact، مدير المعلومات الشخصيّة."
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>اختر بيئة سطح مكتبك المفضّلة</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"مع PowerPack، سوف يكون لديك خيار <b>بيئة سطح المكتب الرسوميّة</b>. اختارت "
-"ماندريبا <b>كيدي</b> كبيئة افتراضيّة."
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-"كيدي هي واحدة من أكثر بيئات أسطح المكتب المتوفّرة <b>تقدّماً</b> و<b>ألفة "
-"للمستخدم</b>. تحتوي كذلك على الكثير من التطبيقات المتكاملة."
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-"إلا أنّنا ننصحك بتحربة كل البيئات المتوفّرة (بما في ذلك <b>جينوم</b>،  "
-"<b>IceWM</b>، إلخ) واختيار المفضّل لديك."
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"باستخدام PowerPack+، سيتوفر لك خيار <b>سطح المكتب الرسومي</b>. اختارت "
-"ماندريبا <b>كيدي</b> كإفتراضي."
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "<b>OpenOffice.org</b>"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr "مع Discovery، ستكتشف  <b>OpenOffice.org</b>."
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-"إنّه <b>طقم مكتبي مفعم بالمزايا</b> يحتوي على تطبيق مُعالج نصوص، وجداول "
-"بيانيّة، وعروض تقديميّة، وتطبيقات الرسوم."
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-"يستطيع OpenOffice.org قراءة وكتابة مُعظم أنواع مستندات <b>مايكروسوفت أوفيس</"
-"b> مثل ملفات وورد، وإكسل وباوربوينت."
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-"يتضمّن Discovery <b>Kontact</b>، الذي هو حلّ كيدي الجديد <b>لبرامج المجموعات</"
-"b>."
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"أكثر من مجرّد <b>مستفيد بريد</b> مفعم بالمزايا، Kontact يتضمّن أيضاً <b>دفتر "
-"عناوين</b>، و<b>تقويم</b>، بالإضافة إلى أداة لتدوين <b>الملاحظات</b>!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr "إنها الطريقة الأسهل للتواصل مع مُراسَليك ولتنظيم وقتك."
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>تصفَّح الإنترنت</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr "سيمنحك Discovery الوصول إلى <b>كلّ مصادر الإنترنت</b>:"
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* تصفح <b>الإنترنت</b> مع كنكيورر."
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr "\t* <b>دردش</b> على الخط مع أصدقائك باستخدام Kopete."
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "\t* <b>انقل</b> الملفات باسخدام KBear."
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr "<b>تمتّع بمزايا الوسائط المتعدّدة</b>"
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr "سيجعل Discovery أيضاً <b>الوسائط المتعدد</b> أسهل بالنسبة إليك:"
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr "\t* شاهد <b>فيديوهاتك</b> المفضّلة باستخدام Kaffeine."
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr "\t* استمع إلى <b>ملفّاتك الموسيقيّة</b> باستخدام amaroK."
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* تحرير وإنشاء <b>الصور</b> باستخدام GIMP."
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr "<b>استمتع بالتشكيلة الواسعة من التطبيقات</b>"
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"في قائمة ماندريبا لينكس ستجد تطبيقات <b>سهلة الاستخدام</b> ل<b>كل مهامّك</b>:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr "\t* أنشئ، حرّر وشاطر مستندات المكتب مع <b>OpenOffice.org</b>."
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* تولّ مسؤوليّة بياناتك الشّخصيّة باستخدام مجموعات المعلومات الشّخصيّة المُدمجة "
-"<b>Kontact</b> و <b>Evolution</b>."
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr "\t* تصفّح الإنترنت مع <b>موزيلا</b> و <b>Konqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* شارك في الدّردشة على الإنترنت باستخدام <b>Kopete</b>"
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* استمع إلى <b>الأقراص المدمجة</b> و <b>ملفّات الموسيقى</b>، وشاهد "
-"<b>الفيديوهات</b>."
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* تحرير وإنشاء الصور باستخدام <b>GIMP</b>."
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>بيئات التطوير</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr "يعطيك PowerPack أفضل الأدوات <b>لتطوير</b> تطبيقاتك الخاصّة."
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-"سوف تستمتع بيئة التطوير الجبّارة، والمتكاملة، <b>KDevelop</b>، من كيدي، والتي "
-"ستمكنك من البرمجة باستخدام الكثير من اللغات."
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-"يُشحن PowerPack أيضاً مع <b>GCC</b>، مُجمّع لينكس الرائد و<b>GDB</b>، مزيل العلل "
-"المرتبط به."
-
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>مُحرّرات التطوير</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr "سيمكنك PowerPack من الاختيار من بين هذه <b>المُحرّرات الشائعة</b>:"
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: محرّر عرض قابل للتّخصيص وفوريّ."
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr "\t* <b>Xemacs</b>: محرّر نصوص آخر مفتوح المصدر ونظام تطوير تطبيقات."
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr "\t* <b>Vim</b>: محرّر نصوص متقدّم ذي ميزات أكثر من Vi القياسي."
-
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>لغات التطوير</b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-"مع كل هذه <b>الأدوات الجبّارة</b>، ستكون قادراً على كتابة تطبيقات باستخدام "
-"<b>العديد من لغات البرمجة</b>:"
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr "\t* <b>لغة C</b> الشهيرة."
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr "\t* لغات البرمجة الكائنيّة المنحى:"
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr "\t* لغات البرمجة النصية:"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr "\t* وأكثر من ذلك."
-
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>أدوات التطوير</b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-"بفضل بيئة التطوير المتكاملة القويّة <b>KDevelop</b> ومُجمّع لينكس الرائد "
-"<b>GCC</b>، سوف تكون قادراً على إنشاء تطبيقات باستخدام <b>العديد من اللغات "
-"المختلفة</b> (C، C++، Java™، Perl، Python، إلخ)."
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>خادم برامج المجموعات</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-"سيعطيك PowerPack+ الوصول إلى <b>Kolab</b>، وهو <b>خادم برامج المجموعات</b> "
-"المليء بالمزايا، والذي، بفضل المستفيد <b>Kontact</b>، يسمح لك أن:"
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* إرسال واستقال <b>البريد الالكتروني</b>."
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr "\t* شاطر <b>مفكّراتك</b> و <b>دفاتر عناوينك</b>."
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr "\t* إدارة <b>المذكّرات</b> و <b>قوائم المهام</b>."
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>الخادمات</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr "تقوية شبكة عملك مع <b>حلول الخادم الرّئيسيّة</b> والتي تشمل:"
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr "\t* <b>Samba</b>: خدمات الملفّات والطباعة لمستفيدي ميكروسوفت® ويندوز®."
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: خادم الإنترنت الأكثر استخداماً."
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr "\t* <b>MySQL</b>: قاعدة البيانات المفت وحة المصدر الأكثر شعبيّةً عالميّاً"
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: نظام الإصدارات الم تزامنة، النّظام السّائد المفتوح المصدر "
-"للتحكّم بالإصدارات الشّفافيّ الشّبكة."
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-"\t* <b>ProFTPD</b>: برنامج  خادم FTP المرخّص تحت GPL والأعلى قابليّة للتّهيئة."
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr "\t* <b>Postfix</b> و <b>Sendmail</b>: خوادم البريد الأكثر شيوعاً وقوّة."
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>مركز تحكّم ماندريبا لينكس</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"<b>مركز تحكم ماندريبا لينكس</b> هي مجموعة أساسيّة من أدوات ماندريبا لينكس "
-"الخاصّة المصمّمة لتبسيط تهيئة حاسبك."
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-"سوف تُعجب فوراً بهذه المجموعة <b>التي تفوق الستّين</b> من الأدوات المفيدة من "
-"أجل <b>تهيئة نظامك بسهولة</b>: عتادك، والأجهزة، وأماكن التركيب، والشّبكة "
-"والإنترنت، وضبط مستوى أمن حاسبك، إلخ."
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>نموذج المصدر المفتوح</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-"كسائر ما يتعلّق ببرمجة الحاسبات، البرمجّيات المفتوحة المصدر  <b>تتطلّب وقتاً "
-"وأناساً</b> لتطويرها. اختراماً لفلسفة المصادر المفتوحة تقوم ماندريبا ببيع "
-"المنتجات والخدمات ذات القيمة الإضافيّة وذلك بغية <b>الاستمرار في تحسين "
-"ماندريبا لينكس</b>. إذا كنت تود <b>دعم فلسفة المصادر المفتوحة</b> وتطوير "
-"ماندريبا لينكس <b>فرجاؤنا منك</b> التّفكير بشراء أحد منتجاتنا أو خدماتنا!"
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>المتجر الآلي</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"للمزيد من المعلومات حول منتجات وخدمات ماندريبا، يمكنك زيارة <b>منصّة التجارة "
-"الالكترونيّة</b> الخاصّة بنا."
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr "هناك يمكنك العثور على كل منتجاتنا، وخدماتنا ومنتجات الأطراف الثالثة."
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr "تمّت <b>إعادة تصميم</b> هذه المنصة لتحسين الكفاءة وسهولة الاستخدام."
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "زُرْنا اليوم على <b>store.mandriva.com</b>!"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr "<b>نادي ماندريبا </b> هو <b>المرافق الأمثل</b> لمنتجك ماندريبا لينكس."
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr "اغتنم فرصة <b>الفوائد القيّمة</b> بالانضمام إلى نادي ماندريبا ، مثل:"
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-"\t* <b>حسومات خاصة</b> على المنتجات والخدمات من متجرنا على الخط <b>store."
-"mandrakesoft.com</b>."
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-"\t* الوصول إلى <b>التطبيقات التجارية</b> )مثلا مُشغّلات NVIDIA® أو ATI™)."
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* الاشتراك في <b>منتديات المستخدمين</b> لماندريبا لينكس."
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-"\t* <b>وصول مبكّر وممتاز</b>، قبل الإصدار العام، <b>لصور ISO</b> لماندريبا "
-"لينكس."
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-"<b>Mandriva Online</b> هي خدمة جديدة أولية تفخر ماندريبا بتقديمها لزبائنها!"
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-"يوفر Mandriva Online تشكيلة واسعة من الخدمات القيّمة <b>للتحديث الميسّر</b> "
-"لأنظمة ماندريبا لينكس الخاصة بك:"
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr "\t* أمن نظام <b>تام</b> )تحديثات البرامج التلقائي(."
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-"\t* <b>إخطار</b> بالتحديث (بواسطة البريد الالكتروني أو البُريمج على سطح المكتب"
-"(."
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr "\t* تحديثات <b>مُجدولة</b> مرنة."
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr "\t* إدارة <b>كل أنظمة ماندريبا لينكس خاصتك</b> باستخدام حساب واحد."
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-"هل تتطلّب <b>مساعدة؟</b> قابل خبراء ماندريبا التقنيين على <b>موقع الدعم الفني "
-"الخاص بنا</b> www.mandrivaexpert.com."
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-"بفضل مساعدة <b>خبراء ماندريبا لينكس الأكفاء</b>، سوف توفّر الكثير من الوقت."
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-"لأي سؤال متعلق بماندريبا لينكس، يمكن شراء الدعم من خلال <b>store."
-"mandrakesoft.com</b>."
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "محطّة عمل مكتبية"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"برامج مكتبية: معالجة الكلمات (OpenOffice.org Writer، Kword(، الجداول "
-"الحسابية (OpenOffice.org Calc، Kspread( ، برامج عرض pdf، الخ"
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"برامج مكتبية: معالجة الكلمات (kword، abiword(، الجداول الحسابية (kspread، "
-"gnumeric) ، برامج عرض pdf، الخ"
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "محطّة ألعاب"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "برامج التسلية: ألعاب فيديو، ألعاب لوحات، ألعاب استراتيجية، الخ"
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "محطة وسائط متعدّدة"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "برامج تحرير/تشغيل الفيديو و الصوت"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "محطّة إنترنت"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"مجموعة من الأدوات لقراءة و إرسال البريد و الأخبار (mutt، tin..( و لتصفح "
-"الإنترنت"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "جهاز شبكة (عميل)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "عملاء لبروتوكولات مختلفة مثل ssh"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "التهيئة"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "أدوات لتسهيل إعداد جهازك"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "أدوات الطرفيّات"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "محررات نصوص، صَدَفات، أدوات ملفات، طرفيات"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "برامج و مكتبات تطوير C و C++"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "التّوثيق"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "كتب ومذكرات Howto حول لينكس و البرامج الحرة"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "القاعدة القياسيّة للينكس (LSB). دعم تطبيقات الأطراف الثالثة"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "برامج المجموعات"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "خادم Kolab"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "جدار ناري/موجِّه"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "بوابة الإنترنت"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "بريد/أخبار"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "خادم بريد Postfix، خادم أخبار Inn"
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "خادم مجلّدات"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "الخادم FTP"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "خادم أسماء النّطاقات ومعلومات الشّبكة"
-
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr "خادم مشاركة الملفّات والطّابعات"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "خادم NFS، خادم Samba"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "قواعد البيانات"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "خادم قواعد بيانات PostgreSQL و MySQL"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "وب/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache، Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "البريد"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "خادم البريد Postfix"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "خادم قواعد البيانات PostgreSQL أو MySQL"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "خادم شبكات"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "خادم NFS، خادم SMB، خادم بروكسي، خادم ssh"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "محطّة عمل كيدي"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"بيئة سطح مكتب كيدي، البيئة الرسومية الأساسية مع مجموعة من الأدوات المصاحبة"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "محطّة عمل جينوم"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"بيئة رسومية مع مجموعة من التطبيقات و أدوات سطح المكتب المناسبة للمستخدمين "
-"العاديين"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "أسطح مكتب رسومية أخرى"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm، Window Maker، Enlightenment، Fvwm، الخ"
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "منافع"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "خادم SSH"
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "Webmin"
-
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "خادم التّهيئة البعيدة Webmin"
-
-#: share/compssUsers.pl:191
-#, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "منافع شبكة/مراقبة"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr "أدوات مراقبة، محاسبة عمليّات، tcpdump، nmap، ..."
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "مرشدو ماندريبا"
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "مرشدو تهيئة الخادم"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-" هذا البرنامج هو برنامج حر؛ يمكنك إعادة توزيعة و/أو تعديله\n"
-" تحت بنود رخصة GNU العمومية الشاملة (GPL) كما نُشِرت عن طريق\n"
-" جمعية البرمجيات الحرة؛ إما اإصدار الثاني من الترخيص أو\n"
-" أي نسخة تالية (حسب اختيارك).\n"
-"\n"
-" هذا البرنامج يُوزَّع على أمل أن يكون مفيدا،\n"
-" لكن دون أي ضمان’؛ حتى بدون الضمانة المفهومة\n"
-" للإتجار أو المناسبة لغرض معين. انظر\n"
-" رخصة GNU العمومية الشاملة للتفاصيل.\n"
-"\n"
-" يجب أن تكون قد تسلمت نسخة من ترخيص GNU العمومية الشاملة\n"
-" مع البرنامج؛ في حالة عدم تسلم الرخصة راسل جمعية البرمجيات الحرة على العنوان "
-"التالي\n"
-" Free Software Foundation، Inc.، 59 Temple Place - Suite 330، Boston، MA "
-"02111-1307،\n"
-" USA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"تطبيق النسخ الاحتياطي والاسترجاع\n"
-"\n"
-"--default             : حفظ الأدلة الافتراضية.\n"
-"--debug               : إظهار كل رسائل إزالة العلل..\n"
-"--show-conf           : قائمة الملفات أو الأدلة لنسخها احتياطياً.\n"
-"--config-info         : شرح خيارات ملف التهيئة (لغير مستخدمي X).\n"
-"--daemon              : استخدام تهيئة العفريت. \n"
-"--help                : إظهار هذه الرسالة.\n"
-"--version             : إظهار رقم النسخة.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"الخيارات:\n"
-"  --boot            - تمكين تهيئة محمّل الإقلاع\n"
-"  --splash          - تمكين تهيئة سمة الإقلاع\n"
-"الوضع الافتراضي: عرض تهيئة ميزة الدّخول التّلقائي"
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - إطبع رسالة المساعدة هذه.\n"
-"  --report          - يجب أن يكون البرنامج واحداً من أدوات ماندريبا لينكس\n"
-"  --incident        - يجب أن يكون البرنامج واحداً من أدوات ماندريبا لينكس"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-"[--add]\n"
-"  --add             - معالج \"إضافة واجهة شبكة\"\n"
-"  --del             - معالج \"حذف واجهة شبكة\"\n"
-"  --skip-wizard     - أدر الاتّصالات\n"
-"  --internet        - هيّئ الإنترنت\n"
-"  --wizard          - مشابهة للخيار --add"
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"تطبيق استيراد ومراقبة الخطوط\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : استيراد من كل تجزيئات ويندوز المتوفرة.\n"
-"--xls_fonts      : إظهار جميع الخطوط الموجودة مسبقاً من xls\n"
-"--install        : قبول أي ملف خط وأي دليل.\n"
-"--uninstall      : إزالة أية خطوط أو أدلة خطوط.\n"
-"--replace        : استبدال كل الخطوط الموجودة.\n"
-"--application    : 0 لغير التطبيقات.\n"
-"                 : 1 كل التطبيقات المتوفرة المدعومة.\n"
-"                 : name_of_application مثال staroffice \n"
-"                 : و gs لبرنامج ghostscript لهذا فقط."
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIONS]...\n"
-"مُهيّء خادم ماندريبا لينكس الطّرفي\n"
-"--enable         : تمكين MTS\n"
-"--disable        : تعطيل MTS\n"
-"--start          : تشغيل MTS\n"
-"--stop           : إيقاف MTS\n"
-"--adduser        : أضف مستخدم نظام موجود إلى MTS (يتطلّب اسم مستخدم)\n"
-"--deluser        : احذف مستخدم نظام موجود من MTS (يتطلّباسم مستخدم)\n"
-"--addclient      : أضف ماكينة عميل إلى MTS (يتطلّب عنوان MAC، IP، واسم صورة "
-"nbi)\n"
-"--delclient      : احذف ماكينة عميل من MTS (يتطلّب عنوان MAC، IP، واسم صورة "
-"nbi)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[keyboard]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"تطبيق اتّصال ومراقبة الشّبكة والإنترنت\n"
-"\n"
-"--defaultintf interface : إظهار هذه الواجهة بشكل افتراضي\n"
-"--connect : اتّصل بالإنترنت إن لم تكن متّصلاً مسبقاً\n"
-"--disconnect : اقطع اتّصال الانترنت إن كنت متّصلاً مسبقاً\n"
-"--force : تستخدم مع وصل/فصل الاتّصال: أجبر وصل/قطع الاتّصال.\n"
-"--status : يُرجع 1 إن كنت متّصلاً أو صفر في خلاف ذلك، ثمّ يخرج.\n"
-"--quiet : لا تكن تفاعليّاً. لاستخدامها مع وصل/قطع الاتّصال."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-"  --no-confirmation      لا تسأل سؤال التّأكيد فيوضع Mandriva Update\n"
-"  --no-verify-rpm        لا تتحقّق من توقيعات الحزم\n"
-"  --changelog-first      عرض سجلّ التّغييرات قبل سرد الملفّات في نافذة الوصف\n"
-"  --merge-all-rpmnew     اقترح دمج كلّ ملفّات .rpmnew/.rpmsave المعثور عليها"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"الاستخدام: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "عليك إعادة التّشغيل لتحدث التّغييرات تأثيراً"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "يرجى تسجيل الخروج ثم استخدام Ctrl-Alt-BackSpace"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr "تحتاج أن تقوم بالخروج والعودة مجدّداً حتى يسري مفعول التّغييرات"
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "غير نافع بدون خادم طرفيّ"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s يتطلّب اسم مستخدم...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s يتطلّب اسم مضيف، عنوان MAC، عنوان IP، nbi-image، 0/1 من أجل "
-"THIN_CLIENT، 0/1 من أجل التّهيئة المحلّيّة...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: %s يتطلّب اسم مضيف...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "تهيئة خادم الطّرفيات"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "تمكين الخادم"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "تعطيل الخادم"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "تشغيل الخادم"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "إيقاف الخادم"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "القرص المرن/ISO للإقلاع الشّبكي"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "صور إقلاع الشبكة"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "إضافة/حذف المستخدمين"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "إضافة/حذف العملاء"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "صُوَر"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr "عملاء/مستخدمين"
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "معالج المرّة الأولى"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr "%s معرّف على أنّه dm، جاري إضافة المستخدم gdm إلى /etc/passwd$$CLIENT$$"
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-"\n"
-" إجراء المُرشد هذا سوف:\n"
-" \t1) يسألك اختيار إمّا عميل `نحيف` أو `ثخين`.\n"
-"\t2) يُعدّ DHCP.\n"
-"\t\n"
-"بعد القيام بهذه الخطوات، سيقوم المُرشد بـ:\n"
-"\t\n"
-"    أ) عمل كلّ "
-"nbis.                                                                \n"
-"    ب) تشغيل "
-"الخادم.                                                          \n"
-"    ج) تشغيل الخادم.                                                     \n"
-"    د) مُزامنة ملفّات الظلّ بحيث يُضاف كلّ المستخدمين، بما فيهم root, \n"
-"       إلى ملف shadow$$CLIENT$"
-"$.                                               \n"
-"    هـ) سؤالك أن تنشئ قرص إقلاع مرن.\n"
-"    و) سؤالك إن كنت تريد إعادة تشغيل KDM، إن كان لعملاء نحيفين.\n"
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "إلغاء المرشد"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr "الرجاء حفظ تهيئة dhcpd!"
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr "استخدام العملاء النّحاف."
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr "مزامنة إعدادات لوحة مفاتيح عميل X مع الخادم."
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"رجاء اختيار نوع العميل الافتراضي.\n"
-"    العملاء `النّحاف` يشغّلون كلّ شيء من ذاكرة/مُعالج الخادم، باستخدام جهاز عَرْض "
-"العميل.\n"
-"    العملاء `الثّخان` يستخدمون الذّاكرة/وحدة المعالجة المركزية (cpu) الخاصّة "
-"بهم ولكن نظام ملفّات الخادم."
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "جاري إنشاء صور الإقلاع الشّبكي لكلّ الأنْوية"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "سيستغرق هذا بضع دقائق."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "تمّ!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-"جاري مزامنة لائحة مستخدمي الخادم مع لائحة العميل، بما يشمل المستخدم الجذر."
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-"لتمكين التغييرات المنفّذة على العملاء النّحاف، يجب إعادة تشغيل مدير العرض. "
-"إعادة التشغيل الآن؟"
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr "نبذة عن خادم الطّرفيّات"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - أنشئ صور إقلاع ممكّنة لـEtherboot:\n"
-"        \tلإقلاع نواة عبر etherboot، يجب إنشاء صورة نواة/initrd\n"
-".        \tيقوم mkinitrd-net بمعظم هذا العمل و drakTermServ هو مجرّد واجهة "
-"رسوميّة\n"
-"        \tلتساعدك بإدارة/تخصيص هذه الصّور. كي تُنشئ الملفّ \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include والذي يسحب على شكل مُضاف "
-"في \n"
-"        \tdhcpd.conf، يجب عليك إنشاء صور etherboot لنواة كاملة واحدة على "
-"الأقل."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"        - صيانة /etc/dhcpd.conf:\n"
-"        \tلتقوم بإقلاع العملاء عبر الشّبكة، يحتاج كلّ عميل إلى مُدخل dhcpd."
-"conf، يعيّن عنون IP \n"
-"        \tوصور الإقلاع الشّبكي للماكينة. يساعد drakTermServبإنشاء/إزالة \n"
-"        \tهذه المُدخلات.\n"
-"\t\t\t\n"
-"        \t(قد تحذف بطاقات PCI الصّورة - يقوم etherboot بطلب الصّورة الصّحيحة.\n"
-"\t\t\tعليك أيضاً اعتبار أنّه عندما يبحث etherboot عن الصّور، فإنّه يتوقّع. \n"
-"\t\t\tسماء شبية بـboot-3c59x.nbi، بدلاً من boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t\n"
-"       \tتنسيق ملف dhcpd.conf المفترض لدعم العملاء غير ذي الأقراص يظهر على "
-"شكل:"
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"        في حين أنّه يمكنك استخدام مجموعة من عناوين IP، بدلاً من إعداد مُدخل "
-"محدّد\n"
-"        لماكينة العميل، فإن استخدام مخطَّط عناوين ثابتة يسهّل استخدام وظيفة\n"
-"        ملفّات التّهيئة الخاصّة لكل عميل والتي يزوّدها ClusterNFS.\n"
-"\t\t\t\n"
-"        ملاحظة: المُدخل '#type' يستخدمه drakTermServ فقط.  يمكن أن يكون "
-"العملاء إمّا 'نحاف'\n"
-"        أو 'ثخان'.  العملاء النّحاف تشغّل معظم البرنامج على الخادم عبر XDMCP، "
-"بينما يقوم العملاء الثّخان بتشغيل \n"
-"        معظم البرامج على ماكينة العميل. يتمّ كتابة inittab، %s\n"
-"للعملاء النّحاف. ملفّات تهيئة النّظام xdm-config، وkdmrc، و gdm.conf يتمّ\n"
-"        تعديلها عند استخدام العملاء النّحاف، لتمكين XDMCP. حيث أنّ هناك مسائل "
-"أمنيّة في\n"
-"        استخدام XDMCP، يتمّ تعديل hosts.deny و hosts.allow للحدّ من الوصول إلى "
-"الشبكة الفرعيّة\n"
-"        المحليّة.\n"
-"\t\t\t\n"
-"        ملاحظة: المُدخل '#hdw_config' يستخدمه أيضاً فقط عملاء drakTermServ.  "
-"يمكن أن يكون العملاء\n"
-"إمّا 'true' أو false'. تمكّن 'true' دخول المستخدم الجذر عندماكينة العميل وتسمح "
-"بتهيئة العتاد\n"
-"       المحلّي من صوت، وماوس، و X، باستخدام أدوات 'drak'. يُمكن هذا\n"
-"        بإنشاء ملفّات تهيئة منفصلة مرتبطة بعنوان IP الخاص بالعميل وإنشاء \n"
-"        أماكن تركيب كتابة/قراءة لتسمح للمستخدمين بتبديل الملفّات. حالما كنت "
-"راضياً بالتّهيئة، يمكنك إزالة صلاحيات دخول المستخدم الجذر من العميل.\n"
-"\t\t\t\n"
-"      ملاحظة: يجب عليك إيقاف/تشغيل الخادم بعد القيام بإضافة أو تغيير العملاء."
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - قُم بصيانة /etc/exports:\n"
-"        \tيسمح Clusternfs بتصدير نظام الملفّات root إلى العملاء اللّاقرصيّة."
-"drakTermServ\n"
-"        \tيقوم بإعداد المُدخل الصّحيح للسّماح بوصول المستخدم anonymous إلى نظام "
-"الملفّات root من\n"
-"        \tالعملاء اللّاقرصيّون.\n"
-"\n"
-"        \tالمُدخل الاعتيادي للتّصدير لـclusternfs هو:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tمع تعريف SUBNET/MASK لشبكتك."
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - قُم بصيانة %s:\n"
-"        \tكي يستطيع المستخدمون الدّخول إلى النّظام من عميل غير ذي قرص، يجب أن "
-"يُكرّر المُدخل\n"
-"        \tفي /etc/shadow في %s. drakTermServ\n"
-"        \tيساعد بهذا الأمر بإضافة أو إزالة مستخدمي النّظام من هذا الملفّ."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - %s لكلّ عميل:\n"
-"        \tخلال clusternfs، كل عميل غير ذي قرص يمكن أن يكون له ملفّات تهيئته "
-"الخاصّة له.\n"
-"        \tعلى نظام الملفّات root للخادم. بالسّماح بتهيئة عتاد العميل المحلّي، \n"
-"        \tسيساعد drakTermServ بإنشاء هذه الملفّات."
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - ملفّات تهيئة النّظام لكلّ عميل:\n"
-"        \tخلال clusternfs، كل عميل غير ذي قرص يمكن أن يكون له ملفّات تهيئته "
-"الخاصّة له.\n"
-"        \tعلى نظام الملفّات root للخادم. بالسّماح بتهيئة عتاد العميل المحلّي، \n"
-"        \tيمكن للعملاء تخصيص الملفّات مثل /etc/modules.conf، /etc/sysconfig/"
-"mouse، \n"
-"        \t/etc/sysconfig/keyboard بناء على كلّ عميل.\n"
-"\n"
-"        ملاحظة: تمكين تهيئة عتاد العميل المحلّي لا يمكّن المستخدم الجذر من "
-"الدّخول إلى الخادم الطّرفي \n"
-"        على ماكينة كلّ عميل مُكّنت فيها هذه الميزة.  التّهيئة المحليّة يمكن أن\n"
-"        تُعطّل مجدّداً، للحفاظ على ملفّات التّهيئة، حالما تتمّ تهيئة ماكينة العميل."
-"machine is configured."
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tسيقوم drakTermServ بتهيئة هذا الملف للعمل مع الصور المنشأة.\n"
-"        \tمن قبل mkinitrd-net، والمُدخلات في /etc/dhcpd.conf، لتقديمصورة "
-"الإقلاع لكل \n"
-"        \tعميل غير ذي قرص.\n"
-"\n"
-"        \tيبدو ملف تهيئة TFTP الاعتيادي مثل:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tالتغييرات هنا عن التثبيت الافتراضي هي تغيير علم disable إلى\n"
-"        \t'no' وتغيير مسار الدليل إلى /var/lib/tftpboot، حيث يضع mkinitrd-"
-"net\n"
-"        \tصوره."
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "قرص الإقلاع"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "ملف ISO الإقلاع"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "صورة PXE"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "نسخة النواة الافتراضية"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr "إنشاء صور PXE."
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "بناء النواة بأكملها -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "لم تُحدّد نواة!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "بناء NIC واحدة -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "لم يتم اختيار NIC!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "بناء كل الأنْوية -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- حذف"
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "لم تختر أيّة صورة!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "حذف كل NBI"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! تظهر إذا كانت كلمة المرور في قاعدة بيانات النظام مختلفة\n"
-"عن تلك التي لقاعدة بيانات خادم الطرفيات.\n"
-"حذف/إعادة إضافة المستخدم إلى خادم الطرفيات لتمكين تسجيل الدخول."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "إضافة مستخدم -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- حذف المستخدم"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "النوع: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "التهيئة المحلّيّة: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"السماح بالتهيئة المحلية\n"
-"للعتاد."
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "لم يتم إنشاء صور اقلاع عبر الشبكة!"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "عميل نحيف"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "السماح للعملاء النحاف"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-"مزامنة تعيينات لوحة مفاتيح X العميل\n"
-" مع الخادم."
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "إضافة عميل -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "type: fat"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "type: thin"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "local config: false"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "local config: true"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- تحرير العميل"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "تعطيل التّهيئة المحلّيّة"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "حذف العميل"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "تهيئة dhcpd..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"يجب إعادة تشغيل مدير العرض لكي يتم تفعيل التغييرات. \n"
-"(service dm restart - في سطر الأوامر)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-"لن يستطيع العملاء النّحاف العمل باستخدام الدّخول التّلقائي. هل أعطّل الدّخول "
-"التّلقائي؟"
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "سوف يستخدم كلّ العملاء %s"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "الشّبكة الفرعيّة:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "قناع الشّبكة:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "الموجّهات:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "قناع الشّبكة:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "عنوان البثّ:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "اسم النطاق:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "خادمات الإسم:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "بداية مجال عناوين IP:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "نهاية مجال عناوين IP:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr "إضافة محتويات TS للتّهيئة الموجودة"
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "كتابة الإعدادات"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "تهيئة خادم dhcpd"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"تم استخراج أغلب هذه القيم\n"
-"من النظام.\n"
-"يمكنك التعديل إذا احتجت لذلك."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "الرجاء إدخال قرص مرن:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "تعذر الوصول إلى القرص المرن!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "يمكن إزالة القرص المرن الآن"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "لا توجد سواقة قرص مرن!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "صورة PXE هي %s\\%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "خطأ في كتابة %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "صورة Etherboot ISO هي %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "حصل شئ خطأ! - هل تم تثبيت mkisofs؟"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "لا حاجة إلى إنشاء /etc/dhcpd.conf أولاً!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr "كلمة المرور %s سيّئة في الخادم الطّرفي - إعادة الكتابة...\n"
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s ليس مستخدما...\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s هو مستخدم للخادم الطّرفيّ مسبقاً\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "فشلت إضافة %s إلى الخادم الطّرفيّ!\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "تمّت إضافة %s إلى الخادم الطّرفيّ\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "تم حذف %s...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "تعذر العثور على %s...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow و /etc/hosts.deny معدّان مسبقاً - لم يتم التغيير"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "تغيّرت التّهيئة - هل أعيد تشغيل clusternfs/dhcpd؟"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "خطأ!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "لا يمكنني العثور على ملف الصورة `%s'."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "أداة إعداد التثبيت الآلي"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"أنت على وشك تهيئة قرص للتثبيت الآلي. هذه الميزة خطرة بعض الشيء و يجب "
-"استخدامها بحذر.\n"
-"\n"
-"بهذه الميزة يمكنك إعادة عمل التثبيت الذي قمت به على هذا الحاسب، مع تنبيهك "
-"لبعض الخطوات، حتّى تقوم بتغيير قيمها.\n"
-"\n"
-"لأقصى حدّ من الأمان، لن تتم أبداً تجزئة و تجهيز الأقراص الصلبة بشكل آلي، مثلما "
-"اخترت أثناء التثبيت على هذا الحاسب.\n"
-"\n"
-"اضغط موافق للاستمرار."
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "إعادة"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "يدوي"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "تهيئة آلية للخطوات"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"رجاء الاختيار لكل خطوة إذا كنت ستقوم بإعادتها آلياً أم أنك تريد أن يكون "
-"التثبيت بشكل يدوي."
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "جاري إنشاء قرص التثبيت الآلي"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "أدخل قرص مرن فارغ آخر في السواقة %s (من أجل المشغّلات)"
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "جاري إنشاء قرص التثبيت الآلي (قرص المشغّلات)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"أهلاً بكم.\n"
-"\n"
-"مُعطيات التثبيت الآلي موجودة على اليمين"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "تهانينا!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"تم توليد القرص المرن بنجاح.\n"
-"يمكنك الآن إعادة التثبيت."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "تثبيت آلي"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "إضافة عنصر"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "إزالة العنصر الأخير"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"Expect هي امتداد للغة البرمجة النّصّيّة TCL تمكّن استخدام الجلسات التّفاعليّة دون "
-"تدخّل المستخدم."
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "خزّن كلمة المرور لهذا النّظام في تهيئة drakbackup."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"لقرص مدمج متعدّد الجلسات، الجلسة الأولى فقط ستمحي قرص cdrw. وإلا فإنّ قرص cdrw "
-"سيُمحى قبل كلّ نسخ احتياطيّ."
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"الخيار سيحفظ الملفّات التي تغيّرت. التصرّف بالضبط يعتمد على ما إذا كان الوضع "
-"التّفاضليّ أو التّزايديّ مُستخدماً."
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"النّسخ الاحتياطي التّزايدي سوف يحفظ فقط الملفّات التي تمّ تغييرها أو التي هي "
-"جديدة منذ آخر نسخ احتياطيّ."
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"النّسخ الاحتياطيّ التّفاضليّ يحفظ فقط الملفّات التي تمّ تغييرها أو التي هي جديدة "
-"منذ النّسخ الاحتياطي الأصليّ `الأساسي`."
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"يجب أن يكون هذا مستخدماً محليّاً أو عنوان بريد الكتروني تريد أن ترسل إليه نتائج "
-"النّسخ الاحتياطي. سوف تحتاج لأن تعرّف خادم بريد عامل."
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"الملفّات أو شوامل القيم المسردة في ملف .backupignore في أعلى شجرة الدّليل سوف "
-"لن يتمّ نسخها احتياطيّاً."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"للنسخ الاحتياطي إلى أوساط أخرى، لا تزال الملفّات تُنشأ على القرص الصّلب، ثمّ "
-"تنقل إلى الوسط الآخر.  تمكين هذا الخيار سيزيل ملفات tar من القرص الصّلب بعد "
-"النّسخ الاحتياطي."
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"بعض البروتوكولات، مثل rsync، يمكنك تهيئتها من جهة الخادم.  بدلاً من استخدام "
-"مسار الدّليل، يمكنك استخدام اسم `الوحدة` لمسار الخدمة."
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"يمكّنك التّخصيص من تحديد التّاريخ والوقت الخاصّ بك.  تستخدم الخيارات الأخرى\n"
-"أجزاء تشغيل في /etc/crontab."
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr "لم يتمّ تحديد وسط لعمل cron."
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr "لم يتم اختيار فاصل زمني لعمل cron."
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Interval cron غير متوفر للمستخدمين غير الجذر"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr "\"%s\" ليس عنوان بريد إلكترونيّ صالح ولا مستخدم محلّي موجود!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"\"%s\" هو مستخدم محلّي، إلّا أنّك لم تحدّد smtp محلّي، لذلك على استخدام عنوان "
-"بريد الكترونيّ كامل!"
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr "تغيّرت قائمة المستخدمين الصّالحين، جاري إعادة كتابة ملف التّهيئة."
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "قائمة بالمستخدمين الأقدمين:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "لائحة المستخدم الجدد:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      تقرير DrakBackup \n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      تقرير خدمة DrakBackup\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    تفاصيل تقرير DrakBackup\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "التقدم الكلي"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s موجود، هل تريد حذفه؟\n"
-"\n"
-"إن كنت قد قمت بهذه العملية مسبقاً\n"
-" ستحتاج غالباً إلى حذف المُدخل من authorized_keys على الخادم."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "قد يستغرق هذا بعض الوقت لتوليد المفاتيح."
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "لا يمكن تشغيل %s."
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "لا يوجد طلب كلمة سر في %s على المنفذ %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "كلمة مرور سيئة على %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "تم رفض التصريح بنقل %s إلى %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "تعذر العثور على %s على %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s لا يستجيب"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"تم النقل بنجاح\n"
-"ربما تريد التحقق إذا كان يمكنك الدخول إلى خادم بالأمر:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"دون تنبيهك إلى إدخال كلمة مرور."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "لا يوجد قرص CD-R/DVD-R في السواقة!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "لا يبدو وسيط قابل للكتابة!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "وسيط غير قابل للمسح!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "قد يستغرق مسح الوسيط بعض الوقت."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "توجد مشكلة في التصريح للوصول إلى القرص المدمج."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "لا يوجد شريط في %s!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "انسخ ملفات النظام..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "ملفات النسخ الإحتياطي للقرص الصلب..."
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "انسخ ملفات المستخدمين..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "انسخ ملفات أخرى..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "التقدم في نسخ القرص الصلب..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "لا تغييرات للنسخة الإحتياطية!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"نشاطات Drakbackup عن طريق %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" مشكلة في وصلة FTP: لم يكن بالإمكان ارسال ملفات النسخ الإحتياطي الخاصة بك "
-"باستخدام FTP.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr "خطأ أثناء إرسال الملف عبر FTP. فضلاً قم بتصحيح إعدادات FTP."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "قائمة الملفات المرسلة بواسطة FTP: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"نشاطات Drakbackup عن طريق  القرص المدمج:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"نشاطات Drakbackup عن طريق شريط التخزين:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr "خطأ أثناء إرسال البريد. لم يتم ارسال بريد التقرير."
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " خطأ أثناء ارسال البريد. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "تعذر إنشاء الكتالوج!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"فضلاً قم بالتأشير على الخيارات التي تحتاجها.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "هذه الخيارات يمكنها نسخ واسترجاع كل الملفات في دليل /etc.\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "انسخ ملفات النظام: (دليل /etc)"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr "استخدم النسخ التراكمي/الاختلافي  (لا تستبدل النسخ الإحتياطية القديمة)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "استخدم النسخ التراكمي"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "استخدم النسخ الاختلافي"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "لا تُضمّن الملفات المهمة (passws، group، fstab("
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"بهذا الخيار يمكنك استرجاع أي نسخة من\n"
-" دليل /etc الخاص بك."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "رجاء اختيار كل المستخدمين الذين تريد تضمينهم في النسخ الإحتياطي."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "لا تستخدم ذاكرة المتصفح المخبئية"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "اختر الملفات أو الأدلة ثم اضغط 'موافق'"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "حذف المُحدد"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "المستخدمون"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "استخدام الإتصال بالشبكة للنسخ الإحتياطي"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "طريقة الشّبكة:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "استخدم Expect لـSSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "إنشاء/نقل مفاتيح النسخ الإحتياطي لـSSH"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "التحويل الآن"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "مفاتيح أخرى (غير drakbackup( موجودة مسبقاً"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "اسم المضيف أو عنوان IP."
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-"الرجاء إدخال الدليل (أو الوحدة) التي سيتم فيها وضع النسخة الإحتياطية على هذا "
-"المضيف."
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "تذكّر كلمة السر هذه"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "يُحتاج إلى اسم المضيف و اسم المستخدم و كلمة المرور!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "استخدم CD/DVDROM للنسخ الإحتياطي"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "الرجاء اختيار جهاز CD/DVD"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "الرجاء اختيار مساحة وسط CD/DVD"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "قرص مدمج متعدد الجلسات"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "وسط CDRW"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "مسح الوسيط القابل لإعادة الكتابة (الجلسة الأولى)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " مسح الآن "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "وسط DVD+RW"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "وسط DVD-R"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "جهاز DVDRAM"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "لم يتم تعريف جهاز قرص مدمج!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "استخدام الشريط للنسخ الإحتياطي"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "إسم الجهاز المستعمل للاحتياط"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr "إحفظ إحتياطيا مباشرة في شريط"
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "لا تقم بإرجاع الشريط بعد النسخ الاحتياطي"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "مسح الشريط قبل النسخ الاحتياطي"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "إخراج الشريط بعد النسخ الاحتياطي"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "أدخل الدّليل الّذي سيتمّ الحفظ فيه:"
-
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr "الدّليل الذي سيتمّ الحفظ فيه"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CD-R / DVD-R"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "كلّ ساعة "
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "يوميّاً"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "أسبوعيّا"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "شهرياً"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "مخصّص"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "يناير"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "فبراير"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "مارس"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "أبريل"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "مايو"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "يونيو"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "يوليو"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "أغسطس"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "سبتمبر"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "أكتوبر"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "نوفمبر"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "ديسمبر"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "الأحد"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "الاثنين"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "الثلاثاء"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "الأربعاء"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "الخميس"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "الجمعة"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "السبت"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "استخدم المراقب"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "الرجاء اختيار الفترة ما بين كل عملية نسخ احتياطي"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "مُدخل الإعداد/crontab المُخصّص:"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "الدّقيقة"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "السّاعة"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "اليوم"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "الشّهر"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "يوم الأسبوع"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "الرجاء اختيار وسيط النسخ الاحتياطي."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "تأكد من أن مراقب cron موجود ضمن خدمات النظام."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr "إن لم يكن جهازك مُداراً طوال الوقت فقد تودّ تثبيت anacron."
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr "لاحظ أن كل وسائط `الشبكة` تستخدم القرص الصلب حاليّاً."
-
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr "رجاء اختيار نوع الضّغط"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "استعمل ملفّات .backupignore"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "أرسل تقريراً بريدياً بعد كل عملية نسخ إلى:"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "خادم SMTP للبريد:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "إلغاء ملفات tar الخلصة بالقرص تاصلب بعد النسخ إلى وسيط آخر."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "ماذا "
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "أين"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "متى "
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "خيارات أكثر"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "وجهة النّسخ الاحتياطي غير مُهيّئة..."
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "تهيئة Drakbackup"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "رجاء اختيار أين تريد النسخ الاحتياطي."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "القرص الصّلب المستخدم لتحضير النّسخ الاحتياطيّة لكل الوسائط"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "عبر الشّبكة"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "على القرص المدمج"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "على جهاز الأشرطة"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "مستخدمو النسخ الاحتياطي"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (الافتراض هو جميع المستخدمين)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "رجاء اختيار ما تريد نسخه احتياطياً"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "نظام النسخ الاحتياطي"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "اختر المستخدم يدويًّا"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "رجاء اختيار البيانات المطلوب نسخها احتياطيا..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"مصادر النسخ الاحتياطي :\n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- ملفّات النّظام  :\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- ملفّات المستخدم:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- الملفّات الأخرى:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- احفظ على القرص الصلب على المسار:%s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tقَصْر استخدام القرص على %s م.ب.\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- حذف كل ملفات tar الخاصة بالقرص الصلب بعد كل عملية نسخ احتياطي.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- النسخ إلى قرص مدمج"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " على الجهاز: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (متعدد الجلسات)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- حفظ إلى الشريط على الجهاز: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr "\tإحفظ إحتياطيا مباشرة في شريط\n"
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- احفظ عبر %s على المضيف: %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t اسم المستخدم: %s\n"
-"\t\t على المسار: %s\n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- خيارات:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tلا تُضمن ملفات النظام\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tالنسخ الإحتياطية تستخدم tar و bzip2\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tالنسخ الإحتياطية تستخدم tar و gzip\n"
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tالنسخ الإحتياطية تستخدم tar فقط\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\tاستخدم ملفات .backupignore\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tإرسال بريد إلى %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tباستعمال خادم SMTP %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- خدمة، %s عبر:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-القرص الصلب.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-الشريط \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-الشبكة عن طريق FTP.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-الشبكة عن طريق SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-الشبكة عن طريق rsync.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "لا تهيئة، اضغط معالج أو متقدّم.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"قائمة البيانات التي سيتم استرجاعها:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- استرجع ملفّات النّظام.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - من التّاريخ: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- استرجاع ملفّات المستخدمين: \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- استرجاع الملفّات الأخرى: \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"قائمة بالبيانات الفاسدة:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "الرجاء إزالة الاختيار أو إزالتها في المرة القادمة."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "ملفات النسخ الإحتياطي فاسدة"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          كل البيانات المختارة تم          "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          تمت الإستعادة بنجاح على %s       "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "          تهيئة الإستعادة       "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "اضغط موافق لاستعادة ملفات اخرى"
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "قائمة المستخدمين الذين سيتم استعادتهم"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "رجاءً اختر تاريخ الاسترجاع:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "استعادة من القرص الصلب"
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "أدخل الدليل الذي تخزّن فيه النسخ الإحتياطية"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr "الدّليل المحتوي على النّسخ الاحتياطيّة"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "اختر وسيط آخر للاستعادة منه"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "وسيط آخر"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "استعادة النّظام"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "أستعادة المستخدمين "
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "استعادة آخر"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "اختر مسار الإستعادة (بدلاً من /)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "المسار المطلوب الاستعادة إليه"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "القيام بنسخ احتياطي جديد فبل الإستعادة (فقط للنسخ الإحتياطية المتدرجة)"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "حذف أدلة المستخدمين قبل الإستعادة"
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr "النصّ الفرعيّ من اسم الملف للبحث عنه (ترك فراغ يطابق الكلّ):"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "إبحث في النّسخ الاحتياطية"
-
-#
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "لم يعثر على مطابقات..."
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "استعادة الملفات المحدّدة"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-"اضغط على التّاريخ/الوقت لترى ملفّات النّسخ الاحتياطية.\n"
-"اضغط على الملفّات مع استخدام زر Ctrl لتحدّد عدّة ملفّات."
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"استعادة مدخل\n"
-"الكتالوج المختار"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"استعادة الملفات\n"
-"المختارة"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "ملفات النسخ الإحتياطي غير موجودة على %s"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "استعادة من القرص المدمج"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"أدخل القرص المدمج بالعلامة %s\n"
-" في سواقة القرص المدمج تحت مكان التركيب /mnt/cdrom"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "علامة القرص ليست العلامة الصحيحة. علامة القرص هي %s."
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "استعادة من الشريط"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"أدخل الشريط بالعلامة %s\n"
-" في جهاز الشريط %s"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "علامة الشريط ليست العلامة الصحيحة. علامة الشريط هي %s."
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "استعادة عن طريق الشبكة"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "استعادة عن طريق بروتوكول الشبكة: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "اسم المضيف"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "وحدة أو مسار المضيف"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "كلمة المرور مطلوبة"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "اسم المستخدم مطلوب"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "اسم المضيف مطلوب"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "مسار أو وحدة مطلوب"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "الملفات المستعادة..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "فشلت الاستعادة..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "لم يتمّ جَلْب %s..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "بحث عن الملفات المطلوب استعادتها"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "استعادة كل النسخ الإحتياطية"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "استعادة مخصصة"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "استعادة من الكتالوج"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "لم يمكن العثور على نسخ احتياطيّة لاستعادتها...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "تأكّد أن %s هو المسار الصّحيح"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " وأن القرص المدمج في السّوّاقة"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr "نسخ احتياطيّة على وسَطْ غير قابل للتّجهيز - استخدام كاتالوج لاسترجاعها"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "القرص في المكان الصحيح - تابع"
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "استعرض إلى مستودع استعادة جديد."
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr "الدّليل المطلوب الاستعادة منه"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "تقدم الإستعادة"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "بناء النسخة الإحتياطية"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "استعادة"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "يجب تثبيت الحزم التالية:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "رجاء اختيار تاريخ الإستعادة..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "نسخ ملفات النظام"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "نسخ ملفات المستخدم"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "نسخ ملفات أخرى"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "التقدم الكلّي"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "جاري ارسال الملفات عن طريق FTP"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "جاري ارسال الملفات..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "النسخ الآن من ملف التهيئة"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "عرض تهيئة النسخ الإحتياطي"
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "تهيئة المرشد"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "تهيئة متقدمة"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "عرض التهيئة"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "عرض السّجل الأخير"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "النسخ الإحتياطي الآن"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"لم يتم العثور على ملف تهيئة \n"
-"الرجاء الضغط على معالج أو متقدم."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_ملف"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/ملف/_خروج"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"محمّل الإقلاع لنظامك ليس في وضع framebuffer. لتُنشّط\n"
-"الإقلاع الرّسوميّ، اختر وضع فيديو رسومي من أداة تهيئة محمّل الإقلاع."
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "هل تريد تهيئته الآن؟"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "تثبيت السمات"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "تحديد سمة الإقلاع الرّسومي"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "سمة"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"عرض السمات\n"
-"في سطر الأوامر"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "إنشاء سمة جديدة"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "المستخدم الإفتراضي"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "سطح المكتب الإفتراضي"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "لا، لا أريد دخولا أليا"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "نعم، أريد دخولا آليا مع هذا (المستخدم، سطح المكتب)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "وضع النظام"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "تشغيل X-Window عند بدء التشغيل"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-"رجاء اختيار وضع فيديو، والذي سيتم تطبيقه على كل مُدخلات الإقلاع المُحدّدة "
-"أدناه.\n"
-"تأكّد من أن بطاقة الفيديو تدعم الوضع الذي تختاره."
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "أداة تقرير العيوب في ماندريبا لينكس"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "مركز تحكّم ماندريبا لينكس"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "أداة المزامنة"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "الأدوات المنفصلة"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "التحكم عن بعد"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "مدير البرامج"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "أداة الإنتقال من ويندوز"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "مرشدو التهيئة"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr "اختيار أداة ماندريبا:"
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"أو اسم التّطبيق\n"
-"(أو المسار الكامل):"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "بحث عن حزمة"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "الحزمة: "
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "النواة:"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"لتسليم تقرير العيوب، اضغط على زر تقرير.\n"
-"سيقوم هذا بفتح نافذة متصفح وب على الصفحة %s\n"
-" حيث ستجد استمارة عليك ملؤها. المعلومات الظاهرة أعلاه سيتم نقلها\n"
-"إلى ذلك الخادم.  \n"
-"بعض الأشياء المفيد شملها في تقريرك هي مخرجات lspci، ونسخة النواة، و/proc/"
-"cpuinfo."
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "تقرير"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "غير مثبت"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "لم يتم تثبيت الحزمة"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "غير معرّف"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "تغيير المنطقة الزمنية"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "المنطقة الزمنيّة - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "هل ساعة الجهاز مضبوطة على توقيت غرينتش؟"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "بروتوكول وقت الشّبكة"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"يمكن لحاسبك أن يُزامن ساعته\n"
-" مع خادم وقت بعيد باستخدام NTP"
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "تمكين بروتوكول وقت الشّبكة"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "الخادم:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr "لم يمكن المزامنة مع %s."
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "إعادة للأصل"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"نحتاج إلى تثبيت حزمة ntp\n"
-" لتمكين بروتوكول وقت الشّبكة\n"
-"\n"
-"هل تريد تثبيت ntp؟"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "إعدادات الشبكة (%d موائمات)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "البوابة:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "الواجهة:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "الرجاء الانتظار"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "الواجهة"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "الحالة"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "اسم المضيف:"
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "تهيئة اسم المضيف..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "تهيئة LAN"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "تهيئة الشبكة المحلية..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "تطبيق"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "إدارة الاتّصالات"
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr "الجهاز المُختار"
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "تهيئة IP"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "خادمات DNS"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "نطاق البحث"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "ثابت"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "التحكّم بالدّفق"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "إنهاء الخط"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "انتهاء وقت المستخدم"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "ملف قِفل المستخدم"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "انتظر نغمة الاتصال قبل القيام بالاتّصال"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "انتظار المشغول"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "صوت المودم"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "تمكين"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "تعطيل"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "فئة الوسيط"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "اسم الوحدة"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "عنوان MAC"
-
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata"
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "ناقل"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "الموقع على الناقل"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr "لم يتم اكتشاف موائم شبكي على نظامك. فضلاً قم بتشغيل أداة تهيئة العتاد."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "إزالة واجهة شبكة"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "اختيار واجهة الشبكة لإزالتها:"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"حدث خطأ خلال حذف واجهة الشّبكة \"%s\":\n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "تهانينا، تمّ حذف واجهة الشّبكة \"%s\" بنجاح"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "بدون IP"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "لا قناع"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "يعمل"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "مُعطّل"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "متّصل"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "غير متصل"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "قطع الإتصال..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "اتصال..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "تحذير، تم ايجاد اتصال إنترنت آخر، ربما يكون يستخدم شبكتك"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "التعطيل الآن"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "التنشيط الآن"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"لم تقم بتهيئة أي واجهات.\n"
-"قم بتهيئتهم أولا عن طريق الضغط على 'تهيئة'"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "تهيئة الشّبكة المحليّة"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "المحوّل %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "بروتوكول الإقلاع"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "يتم تشغيله عند الإقلاع"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"لم تتمّ تهيئة الواجهة بعد.\n"
-"قم بتشغيل مساعد \"أضف واجهة\" من مركز تحكّم ماندريبا لينكس"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"ليست لديك أية وصلة إنترنت مهيئة.\n"
-"شغّل مساعد \"%s\" من مركز تحكم ماندريبا لينكس"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "إعداد واجهة شبكة جديدة (LAN، ISDN، ADSL، ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "تهيئة الإتصال بالإنترنت"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "خادم DNS الثّالث (اختياري)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "تهيئة الإتصال بالإنترنت"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "الدخول إلى الإنترنت"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "نوع الوصلة:"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "الحالة:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr "GDM (مدير عرض جينوم("
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr "KDM (مدير عرض كيدي("
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr "MdkKDM (مدير عرض ماندريبا لينكس("
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr "XDM (مدير عرض X("
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "جاري اختيار مدير العرض"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"مدير عرض X11 يسمح لك بتسجيل الدخول إلى\n"
-"نظامك مع تشغيل خادم النوافذ X و يدعم تشغيل\n"
-"عدة جلسات X مختلفة على ماكينتك المحلية في نفس الوقت."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "تم عمل التغيير، هل تريد إعادة تشغيل خدمة dm؟"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-"أنت بصدد إغلاق كلّ البرامج المشتغلة وخسران جلستك الحالية. هل تنوي فعلا إعادة "
-"بدأ خدمة dm؟"
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "إنشاء قرص الإقلاع"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "عام"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "الجهاز"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "نسخة النواة"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "تفضيلات"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "تفضيلات متقدمة"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "حجم"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "مُعامِلات mkinitrd الاختياريّة"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "اجبار"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "إهمال وحدات raid"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "إذا احتجته"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "إهمال وحدات SCSI"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "إضافة وحدة"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "إزالة وحدة"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "تأكد من وجود الوسيط للوحدة  %s"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"لا يوجد وسط أو ربما يكون الوسط محمي من القراءة للجهاز  %s.\n"
-"فضلاً ادخل وسط فى الوحدة."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "تعذر تنفيذ: %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "اكتمل إنشاء القرص المرن"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "تمّ إنشاء قرص الإقلاع المرن بنجاح \n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"لا يمكن إغلاق mkbootdisk بشكل ملائم:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "البحث في الخطوط المثبتة"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "إزالة اختيار الخطوط المثبتة"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "تحليل كل الخطوط"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "لا توجد خطوط"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "انتهى"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "تعذر العثور على أي خطوط في تجزيئاتك المُركّبة"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "إعادة اختيار الخطوط الصحيحة"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "تعذر العثور على أي خط.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "بحث عن الخطوط في القائمة المثبتة"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "تحويل خطوط %s"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "نسخ الخطوط"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "تثبيت خطوط True Type"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "الرجاء الانتظار أثناء عملية ttmkfdir..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "تم تثبيت خطوط True Type"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "بناء type1inst"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "الإشارة إلى Ghostscript"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "إبطال الملفات المؤقتة"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "إعادة تشغيل XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "إبطال ملفات الخطوط"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "xfs restart"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"قبل تثبيت أي خطوط تأكد أنه لديك الحق باستخدامها و تثبيتها على النظام.\n"
-"\n"
-"-يمكنك تثبيت الخطوط بالطريقة العادية. في حالات نادرة، قد تتسبب الخطوط "
-"المزيفة في تعليق خادم X."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "قائمة الخطوط"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "حَوْل"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "إزالة التّثبيت"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "استيراد"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"حقوق النّسخ 2001-2002 لماندريبا \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (النّسخة الأصليّة)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-" هذا البرنامج هو برنامج حر، يمكنك إعادة توزيعة و/أو تعديله\n"
-" تحت بنود رخصة GNU العمومية الشاملة (GPL) كما نُشِرت عن طريق\n"
-" جمعية البرمجيات الحرة؛ إما الإصدار الثاني من الترخيص أو\n"
-" أي نسخة تالية (حسب اختيارك).\n"
-"\n"
-" هذا البرنامج يُوزَّع على أمل أن يكون مفيدا،\n"
-" لكن دون أي ضمان؛ حتى بدون الضمانة المفهومة\n"
-" للإتجار أو المناسبة لغرض معين. انظر\n"
-" رخصة GNU العمومية الشاملة للتفاصيل.\n"
-"\n"
-"\n"
-" يجب أن تكون قد تسلمت نسخة من ترخيص GNU العمومية الشاملة\n"
-" مع البرنامج؛ إن لم يكن كذلك، راسل جمعية البرمجيات الحرة\n"
-"على العنوان التالي  Free Software\n"
-"Foundation، Inc.، 59 Temple Place - Suite 330، Boston، MA 02111-1307، USA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"شكراً:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t بوساطة Ken Borgendale:\n"
-"\t    حوّل ملف .pfm لويندوز إلى ملف .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t بواسطة James Macnicol: \n"
-"\t    type1inst يولّد الملفّات fonts.dir fonts.scale و Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  بواسطة Andrew Weeks، Frank Siegert، Thomas Henlich، Sergey Babkin  \n"
-"             حوّل خطوط ملفّات ttf إلى خطوط afm و pfb\n"
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "اختر التطبيقات التي ستدعم الخطوط:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"قبل تثبيت أي خطوط تأكد أنه لديك الحق باستخدامها وتثبيتها على نظامك.\n"
-"\n"
-"يمكنك تثبيت الخطوط بالطريقة العادية. في حالات نادرة، قد تتسبب الخطوط المزيفة "
-"في تعليق خادم X."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "ستارأوفيس"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "طابعات شاملة"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "اختر ملف أو دليل الخطوط و اضغط 'إضافة'"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "اختيار الملفات"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "استيراد الخطوط"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "تثبيت الخطوط"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "اضغط هنا إذا كنت متأكدا."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "هنا إن لم تكن متأكدا."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "تم إزالة اختيار الكل"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "تم اختيار الكل"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "حذف القائمة"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "استيراد الخطوط"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "الاختبارات الأولية"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "نسخ الخطوط إلى نظامك"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "تثبيت و تحويل الخطوط"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "ما بعد التثبيت"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "حذف الخطوط من النظام"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "ما بعد إزالة التثبيت"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "مشاركة الاتصال بالإنترنت"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "نعتذر، نحن ندعم إصدارات النواة 2.4 وما بعدها فقط"
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "مشاركة الإتصال بالإنترنت مُعطّلة حالياً"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"تم تنصيب مشاركة الإتصال بالإنترنت مسبقاً.\n"
-"و هي معطلة حالياً.\n"
-"\n"
-"ماذا تريد أن تفعل؟"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "تمكين"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "إعادة التهيئة"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "صَرْف"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "تمكين الخادمات..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "مشاركة إتصال الإنترنت ممكَّنة الآن."
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "مشاركة الإتصال بالإنترنت ممكنة حاليا"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"تم عمل مشاركة الإتصال بالإنترنت مسبقاً.\n"
-"و هي ممكّنة حالياً.\n"
-"\n"
-"ماذا تريد أن تفعل؟"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "تعطيل"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "تعطيل الخادمات..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "مشاركة اتصال الإنترنت غير ممكَّنة الآن."
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"أنت على وشك تهيئة جهازك لمشاركة الإتصال بالإنترنت.\n"
-"باستخدام هذه الميزة سيمكن للحواسيب الأخرى في الشبكة المحلية أن تستخدم وصلة "
-"الحاسب لهذا الحاسب.\n"
-"\n"
-"تأكد من أنك قمت بتهيئة وصلة الشبكة/الإنترنت باستخدام drakconnect قبل "
-"المتابعة.\n"
-"\n"
-"ملحوظة: تحتاج إلى موائم للشبكة كي تقوم بإعداد الشبكة المحلية (LAN)."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "الواجهة %s (باستخدام الوحدة %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "الواجهة  %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "لا موائم شبكة على نظامك"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "واجهة الشبكة "
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"يوجد موائم شبكة واحد فقط معدّ على نظامك:\n"
-"\n"
-"%s\n"
-"\n"
-"نحن على وشك إعداد الشبكة المحلية باستخدام هذا الموائم."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "اختر واجهة الشبكة"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "الرجاء اختيار موائم الشبكة الذي سيتم به الإتصال بالشبكة المحلية."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "واجهة الشبكة معدّة مسبقا!"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"تحذير، موائم الشبكة (%s) معدّ مسبقاً.\n"
-"\n"
-"هل تريد إعادة التهيئة آلياً؟\n"
-"\n"
-"يمكنك القيام بذلك يدوياً لكن يجب أن تكون على علم بما تفعل."
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "إعادة تهيئة آلية"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "لا (للخبراء فقط)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "إظهار تهيئة الواجهة الحالية"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "تهيئة الواجهة الحالية"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"التهيئة الحالية لـ`%s':\n"
-"\n"
-"الشبكة: %s\n"
-"عنوان الـIP: %s\n"
-"صفة الـIP: %s\n"
-"المُشغّل: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"يمكنني حفظ التهيئة وافتراض أنك قمت بتهيئة خادم DHCP مسبقاً؛ في هذه الحال تأكد "
-"من أنني أستطيع قراءة الشبكة التي تستخدمها للشبكة المحلية بشكل صحيح؛ سأقوم "
-"بإعادة تهيئتها و لن أقوم بأي شئ تجاه تهيئة خادم DHCP.\n"
-"\n"
-"مدخل DNS الإفتراضي هو اسم الخادم المخبئي على الجدار الناري. يمكنك ابدال ذلك "
-"بعنوان IP للـDNS الخاص بموفر خدمة الإنترنت، مثل.\n"
-"\t\t      \n"
-"ان لم يكن ذلك، يمكنني إعادة تهيئة الواجهة و إعادة تهيئة خادم DHCP لك.\n"
-"\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "عنوان الشبكة المحلية"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"تهيئة خادم DHCP.\n"
-"\n"
-"هنا يمكنك اختيار خيارات مختلفة لتهيئة خادم DHCP.\n"
-"إذا لم تكن تعلم معنى خيار ما، فاتركه كما هو."
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "عنوان IP لخادم DHCP (هذا)"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "عنوان IP لخادم DNS"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "اسم النطاق الداخلي"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "مدى بداية DHCP"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "مدى نهاية DHCP"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "الإيجار الإفتراضي (بالثواني)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "الإيجار الأقصى (بالثواني)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "إعادة تهيئة الواجهة و خادم DHCP"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "الشبكة المحلية لم تنته بـ`0'، جاري الخروج."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"عثر على تعارض في عنوان الشبكة المحلية المبدئي في التهيئة الحالي لـ%s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "التهيئة..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "جاري تهيئة النصوص البرمجية و تثبيت البرمجيات و بدء الخدمات..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "كانت هناك مشاكل في تثبيت الحزمة %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"تم تهيئة كل شئ.\n"
-"يمكنك الآن مشاركة اتصال الإنترنت مع الحاسبات الأخرى في شبكتك المحلية "
-"باستخدام تهيئة الشبكة الأوتوماتيكية (DHCP) و\n"
-" خادم الذاكرة المخبئة والبروكسي الشّفافي (SQUID)."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"حقوق النّسخ 2003-2005 ماندريبا.\n"
-"هذا برنامج حرّ ويمكن إعادة توزيعه تحت بنود رخصة GNU GPL.\n"
-"\n"
-"الاستعمال: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - إظهار هذه المساعدة     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_label>       - تحميل ملفّات html المساعدة التي تشير إلى id_label\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr " --doc <link>          - رابط بصفحة وب أخرى ( لـWM welcome frontend)\n"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "مركز مساعدة ماندريبا لينكس"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"لا يمكن عرض %s \n"
-". ليس هناك مُدخل مساعدة لهذا النّوع\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "إعدادات النّظام"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "إعدادات مخصصة"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "إعدادات مُخصّصة وإعدادت النّظام"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "قابل للتّعديل"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "المسار"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "المستخدم"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "المجموعة"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "التصاريح"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "تحرير القاعدة الحالية"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"يمكنك هنا رؤية الملفات التي يتم استخدامها لتعديل الصلاحيات، والمالكين "
-"والمجموعات عبر msec.\n"
-"يمكنك كذلك تحرير قواعدك الخاصة التي ستُكتَب فوق القواعد الإفتراضية."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"مستوى الأمن الحالي هو %s.\n"
-"اختر الصّلاحيات لترؤيتها/تحريرها"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "للأعلى"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "نقل القاعدة المختارة للأعلى بمستوى واحد"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "للأسفل"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "نقل القاعدة المختارة للأسفل بمستوى واحد"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "إضافة قاعدة"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "إضافة قاعدة جديدة في النهاية"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "حذف القاعدة المختارة"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "تحرير"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "استعراض"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "المستخدم"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "المجموعة"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "الآخرون"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "قراءة"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "السماح لـ\"%s\" بقراءة الملفّ"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "كتابة"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "السماح لـ\"%s\" بكتابة الملفّ"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "تنفيذ"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "السماح لـ\"%s\" بتنفيذ الملفّ"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"يُستخدم للدليل:\n"
-" يمكن فقط لمالك هذا الدليل أو الملف إلغاؤه"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "استخدام رقم مُعرّف المالك للتنفيذ"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "استخدام رقم معرّف المجموعة للتنفيذ"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "المستخدم:"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "المجموعة:"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "المستخدم الحالي"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "عند التأشير لن يتم تغيير المالك والمجموعة"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "اختيار المسار"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "الخاصية"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "تهيئة خادم PXE"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "تهيئة خادم الثبيت"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"أنت على وشك تهيئة جهازك لتثبيت خادم PXE كخادم DHCP\n"
-"و خادم TFTP لبناء خادم تثبيت.\n"
-"باستخدام هذه الميزة تكون الحاسبات الأخرى على الشبكة المحلية قابلة للتثبيت من "
-"هذا الجهاز.\n"
-"\n"
-"تأكد من أنك قمت بتهيئة الشبكة/الإنترنت باستخدام drakconnect قبل المتابعة.\n"
-"\n"
-"ملحوظة: تحتاج إلى موائم شبكة مخصص لتهيئة الشبكة المحلية (LAN)."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "الرجاء اختيار واجهة الشبكة التي سيتم استخدامها لخادم DHCP."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "الواجهة %s (على الشبكة %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"سيسمح خادم DHCP للحاسبات الأخرى بالإقلاع باستخدام PXE في حدود العناوين "
-"المعطاة.\n"
-"\n"
-"عنوان الشبكة %s يستخدم netmask %s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "عنوان IP الابتدائي لـDHCP"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "عنوان IP النهائي لـDHCP"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"الرجاء تحديد مكان صورة التثبيت.\n"
-"\n"
-"إذا لم يكن هناك دليل موجود، الرجاء نسخ محتويات القرص المدمج أو قرص DVD.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "دليل صورة التثبيت"
-
-#
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "تعذر العثور على صورة"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr "تعذر العثور على صورة CD أو DVD، الرجاء نسخ برنامج التثبيت وملفات rpm"
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"فضلاً حدد مكان ملف auto_install.cfg.\n"
-"\n"
-"اترك الحقل فارغاً إذا لم تكن تريد إعادة وضع التثبيت الالي.\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "مكان ملف install.cfg"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "الوضع"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "القناة"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "شبكة:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "النمط:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "التشفير:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "إشارة:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "متوقف"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "اتصل"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Rescan"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "الحالة"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "اقطع الاتصال"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "إنعاش"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "يعمل"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "الكلّ"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "LOCAL"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "تجاهل"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"هنا، يمكن إعداد مستوى ومدير الأمن لنظامك.\n"
-"\n"
-"\n"
-"'<span weight=\"bold\">مدير الأمن</span>' هو الذي سوف يستقبل إنذارات الأمن "
-"إن كان خيار\n"
-"'<span weight=\"bold\">إنذارات الأمن</span>'محدّداً. يمكن أن يكون ذلك اسم "
-"مستخدم أو بريد إلكترونيّ.\n"
-"\n"
-"\n"
-"قائمة '<span weight=\"bold\">مستوى الأمن</span>'تمكّنك من تحديد واحد من الستّة "
-"مستويات المعدّة مسبقاً للأمن\n"
-"والمُوفَّرة من msec. مدى المستويات هذه يبدأ من الأمن '<span weight=\"bold"
-"\">ضعيف</span>' وسهولة الاستخدام، وصولاً\n"
-"للتهيئة '<span weight=\"bold\">مذعور</span>'المناسبة لتطبيقات الخادم الحسّاسة "
-"جدّاً:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">بسيط</span>: هذا المستوى غير آمن إطلاقاً\n"
-"ولكنّه مستوى أمن سهل الاستخدام جداً. يجب استخدامه فقط للماكينات الغير متّصلة "
-"بأي\n"
-"شبكة وغير ممكنة الوصول للجميع.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">قياسي</span>:هذا هو الأمن القياسي\n"
-"الموصى به لحاسب سوف يستخدم للاتّصال بالإنترنت كعميل.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">مرتفع</span>: الأمن الآن مرتفع بشكل كافٍ\n"
-"لاستخدام النظام كخادم يمكنه قبول الاتصالات من العملاء. إن\n"
-"كانت ماكينتك مجرد عميل للإنترنت، عليك باختيار مستوى أقل.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">مذعور</span>: هذا المستوى شبيه بالمستوى "
-"السّابق،\n"
-"إلا أنّ النّظام مقفل بالكامل ومزايا الأمن محدّدة على\n"
-"أقصاها "
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"وصف الحقول:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(القيمة الإفتراضية: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "مستوى الأمن:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "مدير الأمن:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "الخيارات الأساسية"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "خيارات الشبكة"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "خيارات النظام"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "تحقّق دَوْري"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "الرجاء الانتظار، تعيين مستوى الأمن.."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "الرجاء الانتظار، تعيين خيارات الأمن..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "لم يتم اختيار بطاقة صوت"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"تعذر العثور على بطاقة صوت على جهازك. الرجاء التأكّد من أن بطاقة الصوت "
-"المدعومة من لينكس موصولة بشكل صحيح.\n"
-"\n"
-"\n"
-"يمكنك زيارة قاعدة بيانات العتاد المدعوم الخاصة بنا على:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"ملحوظة: إذا كانت لديك بطاقة صوت ISA PnP، ستحتاج إلى استخدام برنامج alsaconf "
-"أو برنامج sndconfig.  فقط اكتب \"alsaconf\" أو \"sndconfig\" في سطر الأوامر."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"حزمة 'ImageMagick' ضرورية لكي يتم اكمال التهيئة.\n"
-"اضغط \"موافق\" لتثبيت 'ImageMagick' أو \"إلغاء\" للخروج"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"الإحداثي السيني لمربّع النصّ\n"
-"بعدد الحروف"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"الإحداثي الصادي لمربّع النصّ\n"
-"بعدد الحروف"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "عرض النص"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "ارتفاع مربّع النص"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"الإحداثي السيني للركن الأيسر الأعلى\n"
-"لشريط التقدم"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"الإحداثي الصادي للركن الأيسر الأعلى\n"
-"لشريط التقدم"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "عرض شريط التقدم"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "ارتفاع شريط التقدم"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "إظهار الشعار في سطر الأوامر"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "اسم السمة"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "الاستبانة النهائية"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "حفظ السمة"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "جاري حفظ سمة Bootsplash..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "اختيار صورة"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "إختيار لون شريط التقدّم"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr "متّصل عبر المنفذ التسلسلي أو شريط usb"
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "إضافة جهاز UPS"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"أهلا بك في أداة تهيئة مزوّد الطّاقة الغير منقطعة (UPS).\n"
-"\n"
-"هنا، سوف تقوم بإضافة مزوّد طاقة غير منقطة جديد إلى نظامك.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-"سوف نقوم بإضافة جهاز UPS.\n"
-"\n"
-"هل تفضّل استكشاف أجهزة UPS المتّصلة بهذا الجهاز آلياً أم تريد اختيارها يدويا؟"
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "كشف آلي"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "جاري التحقّق"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "تهانينا"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "قام المرشد بإضافة أجهزة UPS التّالية بنجاح:"
-
-#
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "لم يتمّ العثور على أجهزة UPS جديدة"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "تهيئة مُشغّل الـUPS"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "الرجاء اختيار طراز الـ UPS الخاصّ بك."
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "الصانع / الطراز:"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-"نقوم بتهيئة مزوّد الطاقة الغير منقطعة \"%s\" من \"%s\".\n"
-"الرجاء إدخال اسمه، ومشغّله ومنفذه."
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "الإسم:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr "إسم الـ ups الخاصّ بك"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr "إسم المشغّل المدير لجهاز ups الخاصّ بك"
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "المنفذ:"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "المنفذ الّذي يتّصل عليه ups الخاصّ بك"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "قام المرشد بتهيئة جهاز UPS \"%s\" الجديد بنجاح."
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "أجهزة UPS"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "الاسم"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "مستخدمو UPS"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr "قوائم التحكّم بالوصول"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr "قناع IP"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "القواعد"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "فعل"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "المستوى"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "إسم ACL"
-
-# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
-# it displays on screen as "(US) Dvorak", following the same schema
-# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
-# that way the entry is also listed together with the other "Dvorak" entries.
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUPS"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "مرحبا في أدوات تهيئة UPS"
-
-# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
-# it displays on screen as "(US) Dvorak", following the same schema
-# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
-# that way the entry is also listed together with the other "Dvorak" entries.
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "اتّصال VPN مُمكّن."
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"لقد تمّ إعداد اتّصال VPN مسبقاً.\n"
-"\n"
-"إنّه ممكّن حاليّاً.\n"
-"\n"
-"ما الذي ترغب بعمله؟"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "جاري تعطيل VPN..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "تمّ الآن تعطيل اتّصال VPN."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "اتصال VPN مُعطّل حاليّاً"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"لقد تمّ إعداد اتّصال VPN مسبقاً.\n"
-"\n"
-"إنّه معطّل حاليّاً.\n"
-"\n"
-"ما الذي ترغب بعمله؟"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "جاري تمكين VPN..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "تمّ الآن تمكين اتّصال VPN."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "إعداد VPN بسيط."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-"أنت على وشك تهيئة حاسبك لاستخدام اتّصال VPN.\n"
-"\n"
-"بهذه الميزة، يمكن للحواسيب على الشّبكة المحليّة الخاصّة والحاسبات\n"
-"على شبكة بعيدة خاصّة ما، يمكنها مشاطرة الموارد، خلال\n"
-"الجدر الناريّة الخاصّة بهم، عبر الإنترنت، بطريقة آمنة. \n"
-"\n"
-"الاتصال عبر الإنترنت مشفّر. الحاسبات المحليّة والبعيدة\n"
-"تبدو كأنّها على نفس الشّبكة.\n"
-"\n"
-"تأكّد من أنّك قمت بتهيئة شبكتك/واتصال الانترنت باستخدام\n"
-"drakconnect قبل الاستمرار."
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-"اتّصال VPN.\n"
-"\n"
-"هذا البرنامج مبنيّ على المشاريع التّالية:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - المستندات وصفحات الدّليل الآتية مع الحزمة %s\n"
-"\n"
-"رجاء اقرأ على الأقل مستندات ipsec-howto\n"
-"قبل الشّروع بالعمل."
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "وحدة النّواة."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-"يجب أن تحتوي النّواة دعم ipsec.\n"
-"\n"
-"أنت تستخدم نسخة نواة %s.\n"
-"\n"
-"تحتوي هذه النّواة على دعم '%s'."
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "سياسات الأمن"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "racoon عفريت IKE"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "ملف التهيئة"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-"خطوة التّهيئة!\n"
-"\n"
-"تحتاج إلى تعريف سياسات الأمن ومن ثمّ\n"
-"تهيئة خدمة تبادل المفتاح الآلى (IKE). \n"
-"خدمة KAME IKE التي نستخدمها تسمّى 'racoon'.\n"
-"\n"
-"ما الذي تودّ تهيئته؟\n"
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-"بعد ذلك، سوف نهيئ الملفّ %s.\n"
-"\n"
-"\n"
-"ببساطة اضغط على تالي.\n"
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "مُدخلات %s"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-"محتويات الملفّ %s\n"
-"مقسّمة إلى أقسام.\n"
-"\n"
-"يمكنك الآن :\n"
-"\n"
-"  - display عرض، add إضافة، edit تحرير ، أو remove إزالة  الأقسام، ثم\n"
-"  - commit تسجيل التغييرات\n"
-"ماذا تودّ أن تفعل؟\n"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "عرض"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "تنفيذ"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "عرض التهيئة"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-"الملفّ %s غير موجود.\n"
-"\n"
-"لا بدّ أنّ هذه تهيئة جديدة.\n"
-"\n"
-"عليك أن تعود وتختار `إضافة`.\n"
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "مدخلات ipsec.conf"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"يحتوي ملفّ %s أقساماً متعدّدة.\n"
-"\n"
-"ها هو هيكله:\t`إعداد التّهيئة` \n"
-"\t\t\t\t\t`الاتصال الافتراضي` \n"
-"\t\t\t\t\t'عادي1'\n"
-"\t\t\t\t\t'عادي2' \n"
-"\n"
-"يمكنك الآن إضافة واحد من هذه الأقسام.\n"
-"\n"
-"اختر القسم الذي تودّ إضافته.\n"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "config setup"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "normal conn"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "موجود!"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-"هناك قسم له نفس هذا الاسم موجود مسبقاً.\n"
-"يجب أن تكون أسماء الأقسام مميّزة.\n"
-"\n"
-"عليك العودة وإضافة قسم آخر\n"
-"أو تغيير اسم القسم.\n"
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"يجب أن يكون هذا القسم في أعلى\n"
-"ملفّ %s الخاصّ بك.\n"
-"\n"
-"تأكّد من أنّ كلّ الأقسام تتّبع\n"
-"قسم إعداد التّهيئة هذا.\n"
-"\n"
-"اختر الاستمرار أو السّابق عندما تنتهي.\n"
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "interfaces"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsdebug"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "plutodebug"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "plutoload"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "plutostart"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "uniqueids"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-"هذا هو القسم الأول بعد\n"
-"قسم إعداد التّهيئة.\n"
-"\n"
-"هنا تحدّد الإعدادت الافتراضيّة. \n"
-"ستتّبع كلّ الأقسام الأخرى هذا القسم.\n"
-"الإعدادات إلى اليسار اختياريّة. إن لم تعرّفها\n"
-"هنا، بشكل عامّ، يمكنك تعريفها في كلّ\n"
-"قسم.\n"
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "left"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"يحتوي ملف %s الخاصّ بك عدّة أقسام، أو اتّصالات.\n"
-"\n"
-"يمكنك الآن إضافة قسم جديد.\n"
-"\n"
-"اختر الاستمرار عندما تنتهي لكتابة البيانات.\n"
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "section name"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "auto"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "right"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "rightcert"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-"هناك قسم له نفس هذا الاسم موجود مسبقاً.\n"
-"يجب أن تكون أسماء الأقسام مميّزة.\n"
-"\n"
-"عليك العودة وإضافة قسم آخر\n"
-"أو تغيير اسم القسم.\n"
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"أضف سياسة أمن.\n"
-"\n"
-"يمكنك الآن إضافة سياسة أمن.\n"
-"\n"
-"اختر الاستمرار عندما تنتهي لكتابة البيانات.\n"
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "حرّر القسم"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-"يحتوي ملف %s الخاصّ بك عدّة أقسام أو اتّصالات.\n"
-"\n"
-"يمكنك اختيار التي تريد تعديلها هنا أدناه \n"
-"\n"
-"ثم اضغط التالي.\n"
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "أسماء الأقسام"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "لا يمكن التّحرير!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-"لا يمكنك تحرير هذا القسم.\n"
-"\n"
-"هذا القسم إلزاميّ لـFreswan 2.X.\n"
-"على أحدهم تحديد الإصدارة 2.0 في أعلى\n"
-"الملف %s، وبالتّالي، يعطّل أو\n"
-"يمكّن التّشفير النّفعيّ.\n"
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"يحتوي ملف %s الخاصّ بك عدّة أقسام.\n"
-"\n"
-"يمكنك الآن تعديل مُدخلات إعداد التّهيئة.\n"
-"\n"
-"اختر الاستمرار عندما تنتهي لكتابة البيانات.\n"
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"يحتوي ملف %s الخاصّ بك عدّة أقسام أو اتّصالات.\n"
-"\n"
-"يمكنك الآن تعديل مُدخلات الأقسام الافتراضيّة.\n"
-"\n"
-"اختر الاستمرار عندما تنتهي لكتابة البيانات.\n"
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"يحتوي ملف %s الخاصّ بك عدّة أقسام أو اتّصالات.\n"
-"\n"
-"يمكنك الآن تعديل مُدخلات الأقسام العاديّة.\n"
-"\n"
-"اختر الاستمرار عندما تنتهي لكتابة البيانات.\n"
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"تحرير سياسة الأمن.\n"
-"\n"
-"يمكنك الآن تعديل سياسة أمن.\n"
-"\n"
-"اختر الاستمرار عندما تنتهي من كتابة البيانات.\n"
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "حذف القسم"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-"يحتوي ملف %s الخاصّ بك عدّة أقسام أو اتّصالات.\n"
-"\n"
-"يمكنك الاختيار أدناه الأقسام التي تريد أن تزيلها\n"
-"ثم الضغط على التالي.\n"
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-"تهية الملف racoon.conf.\n"
-"\n"
-"تنقسم محتويات هذا الملف إلى أقسام.\n"
-"يمكنك الآن:\n"
-"  - display \t\t (عرض محتويات الملف)\n"
-"  - add\t\t\t (إضافة قسم واحد)\n"
-"  - edit \t\t\t (تعديل معطيّات قسم موجود)\n"
-"  - remove \t\t (إزالة قسم موجود)\n"
-"  - commit \t\t (كتابة التغييرات إلى الملفّ الحقيق)"
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-"الملفّ %s غير موجود\n"
-"\n"
-"لا بدّ أن تكون هذه تهيئة جديدة.\n"
-"\n"
-"عليك أن تعود وتختار تهيئة.\n"
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "مُدخلات racoonf.conf"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"خطوة الأقسام `add`.\n"
-"\n"
-"أدناه هيكل ملف racoon.conf :\n"
-"\t`path`\n"
-"\t`remote`\n"
-"\t`sainfo`\n"
-"\n"
-"اختر القسم الذي تريد إضافته.\n"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "path"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "remote"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-"خطوة القسم `add path`.\n"
-"\n"
-"أقسام المسار يجب أن تكون في أعلى ملف racoon.conf.\n"
-"\n"
-"ضع مؤشّر الماوس على مُدخل الشّهادة للحصول على المساعدة الفوريّة."
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "path type"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-"path include path: يحدد مساراً لتضمين\n"
-"ملف. راجع تضمين الملفات.\n"
-"\tمثال: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: يحدد ملفاً يحتوي\n"
-"مفاتيح متشاركة مسبقاً لمعرفات متعددة. راجع ملف مفتاح متشارك مسبقاً.\n"
-"\tمثال: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: سوف يبحث racoon(8) في هذا الدليل\n"
-"عن استلام شهادة أو طلب شهادة.\n"
-"\tمثال: path certificate '/etc/cert' ;\n"
-"\n"
-"تضمين الملفات: include file \n"
-"يمكن تضمين بعض ملفات التهيئة الأخرى.\n"
-"\tمثال: include \"remote.conf\" ;\n"
-"\n"
-"ملف المفاتيح المتشاركة: يحدد ملف المفاتيح المتشاركة زوجاً\n"
-"مكوناً من المعرّف والمفتاح السري المتشارك والذان يستخدمان في\n"
-"المرحلة الأولى لوسيلة مواثقة المفتاح المتشارك مسبقاً."
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "real file"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"تأكّد من أن أقسام المسار لديك\n"
-"في أعلى الملفّ racoon.conf.\n"
-"\n"
-"يمكنك الآن اختيار الإعدادات البعيدة.\n"
-"اختر الاستمرار أو السابق عندما تنتهي.\n"
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"تأكّد من أن أقسام المسار لديك\n"
-"في أعلى الملفّ %s.\n"
-"\n"
-"يمكنك الآن اختيار إعدادات sainfo.\n"
-"اختر الاستمرار أو السابق عندما تنتهي.\n"
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-"يحتوي ملف %s الخاصّ بك عدّة أقسام أو اتّصالات.\n"
-"\n"
-"يمكن الاختيار من هنا من اللّائحة أدناه المُدخل الذي تريد\n"
-"تحريره ثمّ اضغط على التالي.\n"
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"ملف %s الخاصّ بك يحتوي عدّة أقسام.\n"
-"\n"
-"\n"
-"يمكن الآن تحرير مُدخلات القسم البعيدة.\n"
-"\n"
-"اختر الاستمرار عندما تنتهي من كتابة البيانات.\n"
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-"ملف %s الخاصّ بك يحتوي عدّة أقسام.\n"
-"\n"
-"يمكنك الآن تحرير مُدخلات قسم sainfo.\n"
-"\n"
-"اختر الاستمرار عندما تنتهي من كتابة البيانات."
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"هذا القسم يجب أن يكون في أعلى\n"
-"ملف %s.\n"
-"\n"
-"تأكّد من أن كلّ الأقسام الأخرى تتبع مسار\n"
-"هذه الأقسام.\n"
-"\n"
-"يمكنك الآن تحرير مُدخلات المسار.\n"
-"\n"
-"اختر الاستمرار أو السّابق عندما تنتهي.\n"
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "path_type"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-"تمّت تهيئة كلّ شيء.\n"
-"\n"
-"يمكنك مشاركة الموارد عبر الإنترنت،\n"
-"بطريقة آمنية، باستخدام اتّصال VPN.\n"
-"\n"
-"عليك التّأكّد من أنّ قسم shorewall الخاصّ بالأنفاق\n"
-"مهيّأ."
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr "العنوان المصدر لـSainfo"
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"تعرّف المعطيات للمرحلة الثّانية من IKE\n"
-"(تأسيس IPsec-SA).\n"
-"\n"
-"تُبنى source_id و destination_id كما يلي:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"أمثلة : \n"
-"\n"
-"sainfo anonymous (تقبل الاتّصال من أي مكان)\n"
-"\tاترك هذا المُدخل فارغاً إن كنت تريد المستخدم anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 هو عنوان المصدر\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 هو عنوان المصدر"
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr "البروتوكول المصدر لـSainfo"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"يعرّف المُعطيات للمرحلة الثّانية من IKE\n"
-"(تأسيس IPsec-SA).\n"
-"\n"
-"source_id و destination_id مبنيّة بالشّكل:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"أمثلة : \n"
-"\n"
-"sainfo anonymous (يقبل الاتصال من أي مكان)\n"
-"\tاترك هذا المُدخل فارغاً إن كنت تريد المستخدم anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t'any' الأولى تسمح باستخدام أي بروتوكول للمصدر"
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr "العنوان الوجهة لـSainfo"
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"يعرّف المُعطيات للمرحلة الثّانية من IKE\n"
-"(تأسيس IPsec-SA).\n"
-"\n"
-"source_id و destination_id تُبنى على شكل:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"أمثلة : \n"
-"\n"
-"sainfo anonymous (يقبل الاتصالات من أي مكان)\n"
-"\tاترك هذا المُدخل فارغاً إن أردت السّماح للمستخدم anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 هو العنوان الهدف\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 هو العنوان الهدف"
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr "البروتوكول الوجهة لـSainfo"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"تعرّف المعطيات للمرحلة الثّانية من IKE\n"
-"(تأسيس IPsec-SA).\n"
-"\n"
-"تُبنى source_id و destination_id كما يلي:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"أمثلة: \n"
-"\n"
-"sainfo anonymous (تقبل الاتّصال من أي مكان)\n"
-"\tاترك هذا المُدخل فارغاً إن كنت تريد المستخدم anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t'any' الأخيرة تسمح باستخدام أي بروتوكول للهدف"
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "مجموعة PFS"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-"عرّف مجموعة ترقيات Diffie-Hellman.\n"
-"إن لم تكن تتطلّب PFS فيمكنك تجاهل هذا الموجّه.\n"
-"أي اقتراح سيُقبل إن لم تحدّد واحداً.\n"
-"المجموعة هي أحد التّالي: modp768، modp1024، mod1536.\n"
-"أو يمكنك تعريف 1، 2، أو 5 كرقم مجموعة DH."
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "رقم Lifetime"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-"تحديد العمر لوقت ما والذي سيُقترح\n"
-"في المرحلة الأولى للمفاوضات.  أيّ اقتراح سوف\n"
-"يُقبل، ولن تُقترح الصّفات\n"
-"لنطقة الاتّصال إن لم تحدّدها.  يمكن أن\n"
-"تُحدّد بشكل مُنفصل في كلّ اقتراح.\n"
-"\n"
-"أمثلة : \n"
-"\n"
-"        lifetime time 1 min;    # ثانية، دقيقة، ساعة\n"
-"        lifetime time 1 min;    # ثانية، دقيقة، ساعة\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour ;\n"
-"\n"
-"إذاً، هنا، أرقام العُمر هي 1، 1، 30، 30، 60 و 12.\n"
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "وحْدة Lifetime"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-"تحديد العمر لوقت ما والذي سيُقترح\n"
-"في المرحلة الأولى للمفاوضات.  أيّ اقتراح سوف\n"
-"يُقبل، ولن تُقترح الصّفات\n"
-"لنطقة الاتّصال إن لم تحدّدها.  يمكن أن\n"
-"تُحدّد بشكل مُنفصل في كلّ اقتراح.\n"
-"\n"
-"أمثلة : \n"
-"\n"
-"        lifetime time 1 min;    # ثانية، دقيقة، ساعة\n"
-"        lifetime time 1 min;    # ثانية، دقيقة، ساعة\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour ;\n"
-"\n"
-"إذا، هنا، وحدات العُمر هي 'min'، 'min'، 'sec'، 'sec'، 'sec' و 'hour'.\n"
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "خوارزمية المواثقة"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "خوارزميّة الضّغط"
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr "تفريغ"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "بعيد"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"يحدّد المعطيات لمرحلة IKE الأولى لكلّ نقطة بعيدة.\n"
-"المنفذ الافتراضي هو 500.  إن كان المستخدم anonymous محدّداً، فإنّ statements "
-"تنطبق على كلّ نقاط الاتّصال التي لا تطابق أيّ \n"
-"موجّه بعيد.\n"
-"\n"
-"أمثلة : \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr "نمط المقايضة"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-"يعرّف وضع المقايضة للمرحلة الأولى عندما يكون racoon\n"
-"هو البادئ. هذا يعني أيضاً وضع المقايضة المقبولة\n"
-"عندما يكون racoon هو المجيب. يمكن تحديد أاكثر من وضع\n"
-"بفصلها بفاصلة. كل الأوضاع\n"
-"مقبولة. وضع المقايضة الأول هو الذي\n"
-"يستخدمه racoon عندما يكون هو البادئ.\n"
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "توليد السياسة"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-"هذا الموجّه خاصّ بالمُجيب. لذا عليك\n"
-"تحديد استخدام سلبي حتّى يصبح racoon(8) فقط\n"
-"مُجيباً.  إن لم يكُن للمُجيب أيّ\n"
-"سياسة في SPD خلال المرحلة الثّاثنية من التّفاوض، وكان المُوجّه محدّدٌ \n"
-"استخدامه، فسيقوم racoon(8) باختيار الاقتراح\n"
-"الأوّل في SA payload من المُبتدِئ، ويُولّد مُدخلات\n"
-"السّياسة من الاقتراح.  من المفيد التّفاوض\n"
-"مع العميل ذي عنوان IP المُعيّن له\n"
-"ديناميكيّاً.  لاحظ أنّ السّياسة الغير مناسبة قد تكون\n"
-"مُتثبيتة في SPD الخاصّ بالمُجيب من قبل المُبتدِئ. لذا\n"
-"قد يفشل بعض الاتّصال إن كانت هذه السّياسات\n"
-"مُتثبيتة بسبب عدم تطابق السّياسة بين المُبتدِئ\n"
-"والمُجيب. يتمّ تجاهل هذا المُوجِّه في\n"
-"حالة المُبتدِئ.  القيمة الافتراضيّة هي غير مستخدَم."
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "سلبي"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-"إن كنت لا ترغب ببدء التّفاوض، حدّد هذا\n"
-"باختياره. القيمة الافتراضيّة هي غير محدّد. وهي مفيدة\n"
-"للخادم."
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "نوع الشّهادة"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "ملفّ certfile الخاص بي"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "اسم الشّهادة"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "مفتاحي الخاصّ"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "اسم المفتاح الخاصّ"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr "ملف شهادة النّظراء"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr "اسم شهادة النظراء"
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "تحقّق من الشّهادة"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-"إن كنت لا تريد التحقّق من شهادة النّظير\n"
-"لسبب ما، لا تستخدم هذا الخيار. الوضع الافتراضي هو استخدامه."
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "مُعرّفي"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-"يحدّد المعرّف الذي يرسل إلى المضيف البعيد و\n"
-"النّوع الذي يجب استخدامه في المرحلة الأولى من المُفاوضة.  العنوان، وFQDN، \n"
-"user_fqdn، keyid و asn1dn يمكن استخدامها كـidtype.\n"
-"إنّها تستخدم بالشّكل:\n"
-"\tmy_identifier address [address];\n"
-"\t\tالنّوع هو عنوان IP.  هذا هو النّوع المُفترض\n"
-"\t\tإن لم تحدّد مُعرّفاً لاستخدامه.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tالنّوع هو USER_FQDN (اسم النّطاق المهيّء\n"
-"\t\tبالكامل للمستخدم).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tالنّوع هو FQDN (اسم النّطاق المُهيّء بالكامل).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tالنّوع هو KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tالنّوع هو الاسم المُميَّز ASN.1.  إن\n"
-"\t\tأسقطت string، سيحضر racoon(8) الاسم المُميَّز من\n"
-"\t\tحقل العنوان من الشّهادة.\n"
-"\n"
-"أمثلة : \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr "معرّف النّظراء"
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr "إقتراح"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-"تحديد خوارزميّة التّشفير المستخدمة لمفاوضة\n"
-"المرحلة الأولى. هذا الموجّه يجب أن يعرّف. \n"
-"الخوارزميّة هي أحد ما يلي: \n"
-"\n"
-"DES، 3DES، blowfish، أو cast128 for oakley.\n"
-"\n"
-"للتّحويلات الأخرى، لا يجب أن تستخدم هذه العبارة."
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "خوارزمية Hash"
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "مجموعة DH"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "الأمر"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "مدى عناوين IP للمصدر"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "مدى عناوين IP للهدف"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "بروتوكول الطّبقة العليا"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "أيّها"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "العلامة"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "الاتجاه"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "سياسة IPsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "ipsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr "تجاهل"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr "نفق"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr "نقل"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "المصدر/الوجهة"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr "طلب"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "الافتراضي"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "استخدام"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "فريد"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "الولايات المتّحدة الأمريكيّة (بث)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "الولايات المتّحدة الأمريكيّة (كابل)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "الولايات المتّحدة الأمريكيّة  (كابل-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "كندا (كابل)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "اليابان (بثّ)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "اليابان (كابل)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "الصّين (بثّ)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "أوروبا الغربية"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "أوروبا الشّرقية"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "فرنسا [سيكام]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "نيوزيلندا"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "تلفزيون الكابل الأسترالي Optus"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"فضلاً،\n"
-"اطبع tv norm الخاص بك و بلدك"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "TV norm :"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "المنطقة:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "جاري ضبط قنوات التلفاز..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "جاري ضبط قنوات التلفاز"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "كان هناك خطأ أثناء ضبط قنوات التلفاز"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "نتمنى لك يوماً سعيداً!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "الآن يمكنك تشغيل XawTV (في الواجهة الرسومية!) !\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "لم يعثر على بطاقة تلفاز!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"لم يعثر على بطاقة تلفاز على جهازك. الرجاء التأكّد من أن بطاقة الفيديو/التلفاز "
-"المدعومة في لينكس موصولة بشكل صحيح.\n"
-"\n"
-"\n"
-"يمكنك زيارة قاعدة بيانات العتاد المدعوم الخاصة بنا على:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "مشغلات بديلة"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "قائمة المُشغّلات البديلة لبطاقة الصوت"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "هذا هو النّاقل المادّي الذّي يتّصل به الجهاز (مثلاً، PCI، USB، ...("
-
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic),
-# and not "Bus: datadatadata xxxxxxxx"
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "معرف Bus"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- أجهزة PCI و USB: هذا يعرض قائمة المصنعين و الأجهزة و المصنعين الثانويين و "
-"الأجهزة الثانوية لمُعرّفات PCI/USB"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- أجهزة pci: تعطي منفذ PCI، الجهاز و وظيفة هذه البطاقة\n"
-"- أجهزة eide: الجهاز إما أن يكون جهاز slave أو master\n"
-"- أجهزة scsi: scsi bus و مُعرّف جهاز scsi"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "حجم السواقة"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "إمكانيات مميزة لهذا المُشغّل (امكانية النسخ أو دعم DVD)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "هذا الحقل يصف الجهاز"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "ملف الجهاز القديم"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "اسم الجهاز القديم الساكن المستخدم في حزمة dev"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "جهاز devfs جديد"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "اسم الجهاز الديناميكي الجديد الذي يتم توليده من devfs"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "وحدة"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "وحدة نواة جنو/لينكس التي تتعامل مع هذا الجهاز"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "تجزيئات ممتدّة"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "عدد التّجزيئات الممتدّة"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "الهندسة"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr "هندسة القرص (الأسطوانة، الرّأس، القطاعات)"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "مُتحكّم القرص"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr "مُتحمّم القرص من جهة المضيف"
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "فئة جهاز العتاد"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "الطراز"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "طراز القرص الصلب"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "منفذ طابعة الشبكة"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "التّجزيئات الأوّلية"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "عدد التّجزيئات الأوّلية"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "اسم مصنّع الجهاز"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "ناقل PCI #"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "ناقل PCI الذي يتّصل عليه الجهاز"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "جهاز PCI #"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "رقم جهاز PCI"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr "وظيفة PCI #"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr "رقم وظيفة PCI"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "معرّف الصّانع"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr "هذا هو المعرّف العددي المقياسي للصّانع"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "معرّف الجهاز"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "هذا هو المعرّف العددي للجهاز"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr "المعرّف الثّانوي للصّانع"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr "هذا هو المعرّف العددي الأصغر للصّانع"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr "المعرّف الثّانوي للجهاز"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "هذا هو المعرّف العددي الأصغر للجهاز"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "معرّف جهاز USB"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"نواة جنو/لينكس تحتاج إلى تشغيل حلقة حسابية عند الإقلاع لتنشيط أداة عدّدا "
-"الوقت. يتم حفظ النتيجة كـbogomips كطريقة \"للتأكد من صحة\" وحدة المعالجة "
-"المركزية (cpu)."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "حجم الذاكرة المخبئية"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "حجم ذاكرة وحدة المعالجة المركزية (cpu) المخبئية (المستوى الثاني)"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "علّة الغيبوبة"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "إذا كان المرشد لديه علّة الغيبوبة Cyrix 6x86"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "عائلة Cpuid"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "عائلة وحدة المعالجة المركزية (cpu) (مثلا: 6 لفئة i686)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "مستوى Cpuid"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "مستوى المعلومات التي يمكن الحصول عليها من تعليمات cpuid"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "التردد (ميغاهيرتز)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"تردد وحدة المعالجة المركزية (cpu) بالميغاهيرتز (الميغاهيرتز تشير إلى العدد "
-"التقريبي من التعليمات التي تستطيع وحدة المعالجة المركزية (cpu) تنفيذها في "
-"الثانية الواحدة)"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "الأعلام"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "علامات وحدة المعالجة المركزية (cpu) التي قرّرتها النّواة"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "علّة Fdiv"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"بعض رقاقات إنتل بنتيوم المصنّعة قديما تحتوي على علّة في مُعالج النّقاط العائمة "
-"والتي لا تحقّق الدقّة المطلوبة عند أداء قسمة النّقاط العائمة (FDIV)"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "هل FPU موجود"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "نعم تعني أن المعالج لديه معالج مساعد للعمليات الحسابية"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "إذا كان الـFPU لديه متجه irq"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "نعم تعني أن المرشد المساعد للعمليات الحسابية لديه متجه للإستثناءات"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "علّة F00f"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr "معالجات pentium القديمة كانت تتوقف عن العمل عند استخدام F00F bytecode"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "علّة Halt"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"بعض رقاقات i486DX-100 القديمة لا يمكنها الرّجوع إلى وضع التّشغيل بعد أن تستخدم "
-"تعليمة \"halt\" "
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "الجيل الثانوي لوحدة المعالجة المركزيّة (cpu)"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "جيل وحدة المعالجة المركزية (cpu) (مثال: 8 لبنتيوم III، ...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "اسم الطراز"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "الإسم الرسمي لمصنّع وحدة المعالجة المركزية (cpu)"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "اسم وحدة المعالجة المركزية (cpu)"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "هوية المُعالج"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "رقم المُعالج"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "طَوْر الطراز"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "طَوْر وحدة المعالجة المركزيّة (cpu) (رقم الطّراز الفرعي (الجيل))"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "اسم مصنّع المعالج"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "الحماية من الكتابة"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"العلامة WP في سجلّ CR0 لوحدة المعالجة المركزيّة تُجبر حماية الكتابة على مستوى "
-"صفحة الذّاكرة، وبالتّالي تمكّن وحدة المعالجة المركزية (cpu) من منع طُرق وصول "
-"النّواة الغير مفحوصة إلى ذاكرة المستخدم (والمعروفة بالحماية من العلل)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "نَسَق القرص المرن"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "نَسَق الأقراص المرنة التي تدعمها السواقة"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "قناة EIDE/SCSI"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr "معرّف القرص"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr "عامّة العدد التّسلسلي للقرص"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr "رقم الوحدة المنطقيّة"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-"رقم الهدف SCSI (LUN). يتمّ تعريف أجهزة SCSI المتّصلة بمضيف (بطريقة وحيدة)\n"
-"عن طريق رقم قناة، معرّف للهدف و رقم وحدة منطقية"
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "الحجم المثبت"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr "حجم بنك الذّاكرة المثبت"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr "الحجم المُمكّن"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr "حجم بنك الذّاكرة الممكّن"
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "فئة جهاز الذّاكرة"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "السّرعة"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr "سرعة بنك الذّاكرة"
-
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr "اتّصالات البنك"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr "تعيين المحاجر في بنك الذّاكرة"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "ملفّ الجهاز"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr "ملفّ الجهاز المستعمل للإتّصال مع مشغّل النّواة للماوس"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr "عجلة محاكاة"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "محاكاة العجل أم لا"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "نوع الماوس"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "إسم الماوس"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "عدد الأزرار"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "عدد أزرار الماوس"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "نوع الناقل الذي ترتبط به الماوس"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr "برتوكول الماوس المستعمل من طرف X11"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr "البروتوكول المستعمل من طرف سطح المكتب الرّسومي مع الماوس"
-
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic),
-# and not "Bus: datadatadata xxxxxxxx"
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "التّعريف"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "الوصلة"
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr "الأداء"
-
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata"
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "العلل"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr "FPU"
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "التّجزيئات"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "الميزات"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_خيارات"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_مساعدة"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/تحقق آلي من ال_طابعات"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/تحقق آلي من أ_جهزة المودم"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/تحقق آلي من _سواقات Jaz"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_خروج"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_وصف الحقول"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "مساعدة Harddrake"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"عند اختيارك لجهاز، ستستطيع رؤية معلومات هذا الجهاز في الحقول المعروضة في "
-"الإطار الأيمن (\"معلومات\")"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_تقرير خطأ"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_حول..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "حول HardDrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"هذا هو HardDrake، أداة %s لتهيئة العتاد.\n"
-"<span foreground=\"royalblue3\">النّسخة:</span> %s\n"
-"<span foreground=\"royalblue3\">المؤلّف:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "Harddrake2"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "العتاد المُكتشف"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "تهيئة الوحدة"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "تشغيل أداة التهيئة"
-
-# ../../standalone/harddrake2:1, c-format
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "مجهول"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "مجهول"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "متفرّقات"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "اضغط على جهاز في السلسلة اليسرى لعرض معلوماته هنا."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "ثانوي"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "أوّلي"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "ناسخ أقراص"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "حساب :"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "كلمة المرور:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "أسم المضيف:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "من فضلك اختر توزيعة لوحة مفاتيحك"
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "هل تريد أن يقوم زر BackSpace بعمل وظيفة زر Delete في سطر الأوامر؟"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "تم عمل التغيير، و لكن ليتم تفعيله يجب عليك الخروج"
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "سجلات أدوات ماندريبا لينكس"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "عرض سجلات اليوم المختار فقط"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/ملف/_جديد"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/ملف/_فتح"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/ملف/_حفظ"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/ملف/حفظ _باسم"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/ملف/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/خيارات/اختبار"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/مساعدة/_حول..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "المواثقة"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "المستخدم"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "الرّسائل"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "سجلّ النّظام"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "بحث"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "أداة لمراقبة سجلات نظامك"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "الإعدادات"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "المطابقة"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "لكن غير مطابقة"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "اختيار ملف"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "التقويم"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "محتويات الملف"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "تنبية بريدي"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "فشل معالج التّنبيه بشكل غير متوقّع:"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "يرجى الإنتظار، جاري تحليل الملف: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "خادم الوب Apache"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "مُترجم أسماء النطاقات"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "الخادم FTP"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "خادم البريد Postfix"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "خادم سامبا"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "خدمة Webmin"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "خدمات Xinetd"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "تهيئة نظام التّنبيه بالبريد"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "إيقاف نظام التّنبيه للبريد"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "تهيئة تنبيه البريد"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"أهلا بكم إلى أداة تهيئة البريد.\n"
-"\n"
-"هنا سيمكنك إعداد نظام التنبيه\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "ماذا تريد أن تفعل؟"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "إعدادات الخدمات"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "سوف تستلم تنبيهاً إذا كانت أحد الخدمات المختارة لا تعمل."
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "تحميل الإعداد"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "سوف تستلم تنبيها إذا كان الحِمْل أعلى من هذه القيمة"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "تحميل"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "تهيئة التّنبيه"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "الرجاء إدخال عنوان بريدك الألكتروني أدناه "
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr "وأدخل الاسم (أو عنوان IP) وخادم SMTP الذي تودّ استخدامه"
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "قام المرشد بتهيئة تنبيه البريد بنجاح."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "قام المرشد بتعطيل تنبيه البريد بنجاح."
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "حفظ باسم.."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "الرجاء اختيار نوع الماوس."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "محاكاة الزر الثالث؟"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "اختبار الماوس"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "الرجاء اختبار الماوس:"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "الشّبكة متصلة على الواجهة %s"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "الشّبكة معطّلة على الواجهة %s. اضغط على \"تهيئة الشّبكة\""
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "اتصال بـ%s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "قطع الإتصال بـ %s"
-
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr "مراقبة الشّبكة"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "تهيئة الشبكة"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "interfaces"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "لمحات مختصرة"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "الحصول على مساعدة على الخطّ"
-
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr "تفحص الاقتحام التفاعلي"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "إطلاق دائما عند البدء"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr "حدث هجوم مسح للمنافذ من قبل %s."
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "تم الهجوم على الخدمة %s من قبل %s."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr "حدث هجوم لاختراق كلمة المرور من قبل %s."
-
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "الجدار الناري النشط: تم اكتشاف تدخّل اقتحام"
-
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "هل تريد إضافة المهاجم إلى القائمة السوداء؟"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr "إضافة إلى القائمة السوداء دائماً (دون السؤال مجدداً)"
-
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr "تفاصيل الهجوم"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr "وقت الهجوم: %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "واجهة الشبكة: %s"
-
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr "نوع الهجوم: %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "البروتوكول: %s"
-
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr "عنوان IP للمهاجم: %s"
-
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr "اسم المضيف للمهاجم: %s"
-
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr "الخدمة المُهاجمة: %s"
-
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr "المنفذ المُهاجم: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr "نوع هجوم ICMP: %s"
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "مراقبة الشبكة"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "الإحصائيات الشّاملة"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "آنيّ"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "المتوسّط"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"سرعة\n"
-"الإرسال:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"سرعة\n"
-"الاستقبال:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"زمن\n"
-"الاتصال:"
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr "استخدام نفس المقياس للمستقبَل وللمرسَل"
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "الرجاء الانتظار، اختبار الإتصال..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "قطع الاتصال بالإنترنت"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "جاري الاتصال بالإنترنت"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "فشل قطع اتصال الإنترنت."
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "تمّ قطع اتصال الإنترنت."
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "تم الإتصال."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"فشل الاتّصال.\n"
-"تحقق من تهيئتك في مركز تحكّم ماندريبا لينكس."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "تهيئة الألوان"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "مُرسل: "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "مُستقبل: "
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "متوسط"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "إجراء محلي"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr "تحذير، تم اكتشاف اتصال إنترنت آخر، ربما يستخدم شبكتك"
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "ليس هناك أي اتصال إنترنت مهيأ"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "قراءة بيانات الطابعات المثبتة..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "أداة إدارة الطّابعة لـ%s"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/أ_عمال"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/إ_ضافة طابعة"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/تعيين كا_فتراضي"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/تح_رير"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/ح_ذف"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/وضع ال_خبير"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/ت_حديث"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_تهيئة CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "بحث:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "تطبيق المرشّح"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "Def."
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "إسم الطّابعة"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "نوع الوصلة"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "إسم الخادم"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "إضافة طابعة"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "إضافة طابعة جديدة إلى النّظام"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "تعيين كافتراضي"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "تعيين الطّابعة المختارة كطابعة افتراضية"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "تعديل الطّابعة المختارة"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "حذف الطّابعة المختارة"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "تحديث القائمة"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "تهيئة CUPS"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "تهيئة نظام الطّباعة CUPS"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "مُمكّن"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "معطّل"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "المؤلفون: "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "إدارة الطّابعة %s"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"حزم SANE يجب أن يتمّ تثبيتها لاستخدام الماسحات الضّوئيّة.\n"
-"\n"
-"هل تريد تثبيت حزم SANE؟"
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "إجهاض Scannerdrake."
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr "تعذر تثبيت الحزم المطلوبة لإعداد الماسح الضّوئي باستخدام Scannerdrake."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "لن يتمّ تشغيل Scannerdrake الآن."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "البحث عن ماسحات ضوئية معدّة..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "البحث عن ماسحات ضوئية جديدة..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "جاري إعادة توليد قائمة الماسحات الضوئية المعدّة..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "الـ%s غير مدعوم من قبل هذا الإصدار من %s."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s تم ايجادها على %s، هل تريد تهيئتها آلياً؟"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s غير موجودة في قاعدة بيانات الماسحات الضوئية، هل تريد تهيئتها يدوياً؟"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "اختيار طراز الماسح الضوئي"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " )"
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "تم اكتشاف الطراز: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "المنفذ: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr " (غير مدعوم)"
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "ال%s غير مدعوم ضمن لينكس."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "عدم تثبيت ملفّ firmware"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr "من الممكن أنّ %s يحتاج إلى تحميل firmware الخاصّ به في كلّ مرّة يعمل بها."
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "إن كانت هذه هي المشكلة، يمكنك جعل هذا يحدث تلقائيّاً."
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"كي تقوم بذلك، عليك بتزويد ملف firmware لماسحتك الضّوئيّة حتّى يمكن تثبيتها."
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"ستجد الملف على القرص المدمج أو المرن الموجود مع ماسحتك الضّوئيّة، على موقع "
-"الشّركة المصنّعة، أو على تجزيء ويندوز."
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "تثبيت ملفّ البرمجيات المضمنة من"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "اختيار ملفّ البرمجيات المضمنة"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "ملفّ البرمجيات المضمنة %s غير موجود أو غير قابل للقراءة!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr "قد تحتاج ماسحاتك إلى تحميل برمجياتها المضمنة عند كلّ تشغيل."
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr "كيف تقوم بهذا، عليك بتزويد ملفّات البرمجيات المضمنة لماسحاتك للتّثبيت."
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-"إن كنت ثبتّ البرمجيات المضمنة لماسحك، يمكنك تحديثها هنا بتزويد ملفّ البرمجيات "
-"المضمنة الجديد."
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "تثبيت البرمجيات المضمنة لـ"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "اختيار ملفّ البرمجيات المضمنة لـ%s"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "تعذر تثبيت ملفّ البرمجيات المضمنة لـ%s!"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "تمّ تثبيت ملفّ البرمجيات المضمنة لـ%s بنجاح"
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "الـ%s غير مدعوم"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"يجب تهيئة %s عن طريق printerdrake.\n"
-"يمكن تشغيل PrinterDrake من مركز تحكم %s في قسم العتاد."
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "اكتشاف المنافذ المتوفرة آلياً"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "الرجاء اختيار الجهاز المتصل به %s"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(ملحوظة: المنافذ المتوازية لا يمكن اكتشافها منها آلياً)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "اختيار الجهاز "
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "البحث عن الماسحات الضوئية..."
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "إعداد وحدات النواة..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "انتباه!"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-"لا يمكن تهيئة %s الخاص بك بشكل آلي بالكامل.\n"
-"\n"
-"بحاجة إلى تعديلات يدويّة. الرجاء تحرير ملف التهيئة /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-"المزيد من المعلومات في صفحة كتيّب المُشغّل. لقراءة الكتيّب يجب تنفيذ الأمر \"man "
-"sane-%s\"."
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"يمكنك الآن مسح المستندات باستخدام \"XSane\" أو \"Kooka\" من الوسائط المتعدّدة/"
-"برامج رسومية في قائمة التطبيقات."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-"تمت تهيئة %s، ولكن من المحتمل أن تكون هناك حاجة إلى تعديلات يدوية لجعله "
-"يعمل. "
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-"إن لم يظهر في قائمة الماسحات المهيئة في نافذة Scannerdrake الرئيسية أو إن لم "
-"يعمل بشكل صحيح،"
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "فيجب تحرير ملف التهيئة /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"تمت تهيئة %s الخاصّ بك.\n"
-"يمكنك الآن مسح المستندات باستخدام \"XSane\" أو \"Kooka\" من الوسائط المتعدّدة/"
-"برامج رسومية في قائمة التطبيقات."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"الماسحات الضوئية التالية\n"
-"\n"
-"%s\n"
-"متوفرة على لنظامك.\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"الماسح الضوئي التالي\n"
-"\n"
-"%s\n"
-"متوفر على نظامك.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "لا توجد ماسحات ضوئية متوفرة على نظامك.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "البحث عن ماسحات ضوئية جديدة"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "إضافة ماسح ضوئي يدوياً"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "تثبيت/تحديث ملفّات firmware"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "مشاركة الماسحات الضوئية"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "كل الماكينات البعيدة"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "هذه الماكينة"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"يمكنك هنا اختيار إذا ما كانت الماسحات الضوئيّة المتّصلة بهذا الجهاز يمكن "
-"الوصول إليها من الأجهزة البعيدة وعن طريق أي أجهزة بعيدة."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"يمكنك أيضاً أن تقرر هنا إذا كانت الماسحات الضوئية على الماكينات البعيدة يجب "
-"أن تكون متوفرة لهذه الماكينة."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "الماسحات الضوئية على هذه الماكينة متوفرة للحاسبات الأخرى"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "مشاركة الطابعات على المضيفين:"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "استخدام الماسحات الضوئية على الحاسبات البعيدة"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "استخدام الماسحات الضوئية على المضيفات: "
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "مشاركة الماسحات الضوئية المحلية"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "توجد ماكينات يجب أن تكون الماسحات الضوئية الموصولة محلياً متوفرة لها:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "إضافة مضيف"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "تحرير المضيف المختار"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "حذف المضيف المختار"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "عنوان IP/اسم المضيف:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "اختيار المضيف الذي يجب أن تتوفر له الماسحات الضوئية المحلية:"
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "الرجاء إدخال اسم المضيف أو عنوان IP.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "هذا المضيف موجود في القائمة مسبقاً، لا يمكن إضافته مرة أخرى.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "استخدام الماسحات الضوئية البعيدة"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "توجد ماكينات يمكن استخدام الماسحات الضوئية منها:"
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"saned يجب تثبيته لمشاركة الماسح الضّوئي المحلي.\n"
-"\n"
-"هل تريد تثبيت الحزمة saned؟"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "ماسحاتك لن تكون متوفّرة على الشّبكة."
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "تمت إزالة بعض الأجهزة في فئة العتاد \"%s\":\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr "- تمّت إزالة %s\n"
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "تمّت إضافة بعض الأجهزة: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- تمّت إضافة %s\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "جاري جس العتاد"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr "تغييرات العتاد في الصّنف \"%s\" (%s ثانية للإجابة("
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "هل تريد تشغيل أداة التّهيئة الملائمة؟"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "اللّغة"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "الرخصة"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "تهيئة الماوس"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "اكتشاف القرص الصّلب"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "اختيار صنف التّثبيت"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "اختيار لوحة المفاتيح"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "التجزئة"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "تنسيق التجزيئات"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "اختيار الحزم المطلوب تثبيتها"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "تثبيت النّظام"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "كلمة مرور المدير"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "إضافة مستخدم"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "تهيئة الشّبكة"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "تثبيت محمِّل الإقلاع"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "تهيئة X"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "تهيئة الخدمات"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "تثبيت التحديثات"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "الخروج من التّثبيت"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "هل هذا صحيح؟"
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "لم يتم اختيار أي ملف"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "لقد اخترت ملفاً، وليس دليلاً"
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "لقد اخترت دليلاً، وليس ملفاً"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "لا دليل كذلك"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "لا ملف كذلك"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "توسيع الشّجرة"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "ضمّ الفروع"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "تبديل بين فرز السّرد أو المجموعة"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s غير مثبت\n"
-"اضغط \"التالي\" للتثبيت أو \"إلغاء\" للخروج"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "فشل التّثبيت"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "عدد الامتدادات المنطقيّة: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "نظامك قليل الموارد. قد تقابل بعض المشاكل قي تثبيت\n"
-#~ "ماندريبا لينكس. إذا حدث ذلك، يمكنك التثبيت في وضع نصي بدلاً من ذلك. لهذا "
-#~ "الغرض،\n"
-#~ "اضغط `F1' عند الإقلاع من القرص المدمج، و اكتب `text'."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "جاري الإتصال بموقع ماندريبا لينكس للحصول على قائمة بالمرايا المتوفرة..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "تثبيت ماندريبا لينكس %s"
-
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "تحذير: تمت تهيئة هذا الجهاز سابقاً للإتصال بالإنترنت.\n"
-#~ "تعديل الحقول أدناه سيغيّر هذه التهيئة.\n"
-#~ "هل تريد حقاً إعادة تهيئة هذا الجهاز؟"
-
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - إنشاء أقراص etherboot مرنة/مدمجة:\n"
-#~ "        \tماكينات العملاء غير ذوي الأقراص تحتاج إما إلى صور ROM على واجهة "
-#~ "الشبكة NIC، أوقرص إقلاع مرن\n"
-#~ "        \tأو قرصاً مدمجاً لابتداء سلسلة الإقلاع. سيساعد drakTermServ بتوليد "
-#~ "هذه\n"
-#~ "        \tالصور، بناء على واجهة الشبكة NIC في ماكينة العميل.\n"
-#~ "        \t\t\n"
-#~ "        \tمثال بسيط على إنشاء قرص إقلاع مرن لبطاقة 3Com 3c509 يدوياً:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "مجموعة عناوين IP الديناميكيّة:"
-
-#~ msgid "hd"
-#~ msgstr "hd"
-
-#~ msgid "tape"
-#~ msgstr "شريط"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "موقع WebDAV البعيد متزامن مسبقاً!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "فشلت عملية نقل WebDAV!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr ""
-#~ "تمّ تخطّي حدّ تخزين النّسخ الاحتياطي!\n"
-#~ "%d ميجابايت استخدمت مقابل %d ميجابايت مُعيّنة."
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "الرجاء إدخال الحجم الأقصى\n"
-#~ " المسموح به لـDrakbackup )م.ب.)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-الشبكة عن طريق webdav.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "استعمال إقلاع رسومي"
-
-#~ msgid "first step creation"
-#~ msgstr "إنشاء الخطوة الأولى"
-
-#~ msgid "choose image file"
-#~ msgstr "اختيار ملف صورة"
-
-#~ msgid "Browse"
-#~ msgstr "استعراض"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "تهيئة صورة bootsplash"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "لون شريط التقدم"
-
-#~ msgid "Preview"
-#~ msgstr "معاينة"
-
-#~ msgid "Choose color"
-#~ msgstr "اختيار اللون"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "جعل رسائل النواة صامتة افتراضياً"
-
-#~ msgid "Notice"
-#~ msgstr "ملاحظة"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "هذه السمة ليس لها خلفية إقلاع في %s!"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "يجب اختيار ملف صورة أولاً!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "توليد المعاينة..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "معاينة %s BootSplash (%s("
-
-#~ msgid ""
-#~ "The image \"%s\" cannot be load due to the following issue:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-#~ msgstr ""
-#~ "لا يمكن تحميل الصّورة \"%s\" بسبب المشكل التّالي:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "لا توجد سواقة أقراص مرنة"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "الرجاء إدخال قرص وحدات التحديث في السواقة %s"
-
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "تفيناغ (+لاتينيّة/عربيّة)"
-
-#~ msgid "No network card"
-#~ msgstr "لا توجد بطاقة شبكة"
-
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "استخدام مشغّل مثبّت مسبقاً (%s)"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "لم تقم باختيار أي خط"
-
-#~ msgid "http://www.mandrivalinux.com/en/101errata.php3"
-#~ msgstr "http://www.mandrivalinux.com/en/101errata.php3"
-
-#~ msgid "The Mandriva Linux 10.1 products are:"
-#~ msgstr "منتجات ماندريبا لينكس 10.1 هي:"
-
-#~ msgid ""
-#~ "\t* <b>Mandriva Linux 10.1 for x86-64</b>, The Mandriva Linux solution "
-#~ "for making the most of your 64-bit processor."
-#~ msgstr ""
-#~ "\t* <b>ماندريبا لينكس 10.1 لأنظمة x86-64</b>، حلّ ماندريبا لينكس للحصول "
-#~ "على أفضل نتيجة من معالجات 64بت."
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "لا يوجد متصفح متوفر! الرجاء تثبيت متصفح"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "لا يوجد متصفح مثبت على نظامك، فضلاً قم بتثبيت متصفح إذا كنت ترغب في تصفح "
-#~ "نظام المساعدة"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
deleted file mode 100644
index 9457eb611..000000000
--- a/perl-install/share/po/az.po
+++ /dev/null
@@ -1,26401 +0,0 @@
-# translation of DrakX-az.po to Azerbaijani
-# translation of DrakX-az.po to Azerbaijani Turkish
-# DrakX-az.po faylının Azərbaycan dilinə tərcüməsi
-# Copyright (C) 2000,2003, 2004 Free Software Foundation, Inc.
-# Copyright (c) 2000 Mandriva
-# Vasif Ismailoglu MD<azerb_linux@hotmail.com> , 2000-2001
-# Mətin Əmirov <metin@karegen.com>, 2001-2003, 2004.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX-az\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-03-31 14:21+0200\n"
-"Last-Translator: Mətin Əmirov <metin@karegen.com>\n"
-"Language-Team: Azerbaijani <translation-team-az@lists.sourceforge.net>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.3.1\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Hansı USB yaddaş modulunu şəkilləndirmək istəyirsiniz?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "Yaddaş modulu yazıla bilən deyil"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Yenidən Sına"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "USB yaddaş modulu olmadan davam et"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Yenidən başlat"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "Məlumatlarınızı qeyd etmək üçün yaddaş çubuğu lazımdır"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "USB yaddaş modulunu yenidən təsbit et"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "USB yaddaş modulu quraşdırılır"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr ""
-"Xahiş edirik gözləyin, USB yaddaş modulu üstünə sistem quraşdırma faylları "
-"yazılır..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Avtomatik quraşdırma"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Xahiş edirik gözləyin, avadanlıqlar tapılır və quraşdırılır..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Xəta"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Bir xəta oldu, yalnız necə düzəldiləcəyi bilinmir.\n"
-"Davam edin, riski sizə aitdir!"
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Bir xəta oldu"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "Sistem qurğu fayllarını sil"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "Sadəcə olaraq yenidən başlat"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "Sadəcə olaraq CDROM dəstəyi olmadan işə sala bilərsiniz"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Bu proqramları öldür"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "CDROM dəstəyi yoxdur"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Diqqətlə oxuyun!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB və ya daha çox"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X verici"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "X vericisini seçin"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Çoxlu Başlıq quraşdırılması"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Sisteminiz çoxlu başlıq quraşdırmasını dəstəkləyir.\n"
-"Nə etmək istəyirsiniz?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Xorg paketi qurula bilmir: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Ekran kartınızın yaddaş böyüklüyünü seçin"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Xorg quraşdırılması"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Necə bir Xorg qurğusunu istəyirsiniz?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Bütün başlıqları ayrı ayrı quraşdır"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Xinerama uzantısını işlət"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Yalniz \"%s\"%s kartını quraşdır"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "3D avadanlıq sür'ətləndirməsi ilə Xorg %s"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "Sizin kartınızın Xorg %s ilə 3D dəstəyi ola bilər."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "SINAQ MƏRHƏLƏSİNDƏKİ 3D sür'ətləndirmə dəstəkli Xorg %s"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Sizin kartınızın Xorg %s ilə 3D dəstəyi ola bilər.\n"
-"DİQQƏT! BU SINAQ MƏRHƏLƏSINDƏDIR VƏ KOMPÜTERİNİZ DONDURA BILƏR."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Xüsusi"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Çıx"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Qrafika Kartı"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Həlledilirlik"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Sına"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Seçimlər"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Dəyişikliklər saxlansın?\n"
-"Hazırkı qurğular belədir:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, fuzzy, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Monitorunuzu seçin"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Monitorunuzu seçin"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Tax və İşlət"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Ümumi"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "E'malatçı"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-"Tax və İşlət sınaması bacarılmadı. Xahiş edirik, hazırkı monitoru seçin"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Buradaki iki vacib parametr üfüqi ve şaquli yeniləmə sür'ətləridir.\n"
-"Seçərkən monitorunuzun qabiliyyətinin üstündə bir parametr\n"
-"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
-"Seçərkən bir qərarsızlığa düşərsəniz, alçaq rezolyusiya seçin."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Üfüqi yeniləmə sür'əti"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Şaquli yeniləmə sür'əti"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 rəng (8 bits)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 min rəng (15 bits)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 min rəng (16 bits)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 million rəng (24 bit)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Həlledilirliklər"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Digər"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Həlledilirlik və rəng dərinliyini seçin"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Qrafika kartı: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "Oldu"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Ləğv Et"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Yardım"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Qurğuların sınağı"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Diqqət: Bu qrafika kartı ilə ediləcək sınaq kompüterinizi dondura bilər"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Xəta meydana gəldi:\n"
-"%s\n"
-"Bə'zi parametrləri dəyişdirməyi sınayın"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniyə sonra çıxılacaq"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Bu qurğu doğrudur?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavatura düzülüşü: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Siçan növü: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Siçan avadanlığı: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorun Şaquli Daraması: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorun Üfüqi Yeniləməsi: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Ekran kartı: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Ekran kartı yaddaşı: %s KB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Rəng dərinliyi: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Həlledilirlik: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg sürücü: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X ilə Açılış"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq X ilə açılması üçün qura bilərəm.\n"
-"Açılışda X Window ilə başlamaq istəyirsiniz?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Görünən odur ki qrafika kartınızın TV-OUT konnektoru var.\n"
-"O, frame-buffer işlədilərək işləməsi üçün quraşdırıla bilər.\n"
-"\n"
-"Bunun üçün qrafika kartınızı kompüterinizi başlatmadan əvvəl Televizorunuz "
-"ilə bağlamalısınız.\n"
-"Daha sonra açılış yükləyicisində \"TVout\" girişini seçin\n"
-"\n"
-"Bu xüsusiyyətə maliksiniz?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Televiziyanız hansı normu işlədir?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Xahiş edirik, gözləyin"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Açılış yükləyicisi qurulumu fəaliyyətdədir"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Açılış yükləyicisi qurulumu iflas etdi. Xəta:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Siz Open Firmware açılış avadanlığınızı açılış yükləyicisini\n"
-"fəallaşdırmaq üçün dəyişdirməli ola bilərsiniz. Command-Option-O-F "
-"düymələrini\n"
-" yenidən başlarkən basın və bunları girin:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Sonra da bunları yazın: shut-down\n"
-"Bir sonrakı başlanğıcda açılış yükləyicisi sətirini görməlisiniz."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Açılış yükləyicisini bir bölmə üstünə qurma qərarı verdiniz.\n"
-"Bu o deməkdir ki sizin onsuzda bir açılış yükləyiciniz var. (mis: System "
-"Commander).\n"
-"\n"
-"Hansı sürücü üstündən açılış edirsiniz?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektoru (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Kök bolməsinin ilk sektoru"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Disketə"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Keç"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Qurulumu"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Sistem yükləyicisini hara qurmaq istəyirsiniz?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Açılış Tərzi Quraşdırılması"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Sistem yükləyicisinin ana seçimləri"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Yaddaş miqdarını MB cinsindən verin"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``Əmr sətiri seçimlərini məhdudlaşdır`` seçimi şifrəsiz bir işə yaramaz"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Şifrələr uyğun gəlmir"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Xahiş edirik, təkrar sınayın"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "İstifadə ediləcək Açılış idarəcisi"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Açılış avadanlığı"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Açılışda gecikmə müddəti"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "ACPI-ni Fəallaşdır"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "APIC olmamasına məcbur et"
-
-#: any.pm:291
-#, fuzzy, c-format
-msgid "Force No Local APIC"
-msgstr "APIC olmamasına məcbur et"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Şifrə"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Şifrə (təkrar)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Əmr sətiri seçimlərini məhdudlaşdır"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "məhdudlaşdır"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "/tmp-i hər açılışda təmizlə"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ümumi yaddaş miqdarı (%d MB tapıldı)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Init İsmarışı"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Açıq Firmware Gecikməsi"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Çəyirdək Açılış Vaxt Dolması"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "CD Açılışı Fəallaşdırılsın?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "OF Açılışı Fəallaşdırılsın?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "Əsas ƏS?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Əks"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Kök"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Sonuna əlavə et"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Video modu"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "Şəbəkə profili"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Etiket"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Ön Qurğulu"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd böyüklüyü"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Boş etiket qəbul edilmir"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Çəyirdək əksini bildirməlisiniz"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Kök bölməsini bildirməlisiniz"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Bu etiket onsuzda istifadə edilib"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Nə cür bir giriş əlavə etmək istəyirsiniz?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linuks"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Digər sistemlər (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Digər ƏS (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Digər ƏS (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Buradakı bir birindən fərqli seçimlərə yenilərini əlavə edə bilər,\n"
-"ya da mövcud olanları dəyişdirə bilərsiniz."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "X proqramlarına yetişmə icazəsi"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "rpm vasitələrinə yetişmə"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "\"su\" icazəsi ver"
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "idarəvi fayllara yetişmə"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "şəbəkə vasitələrinə yetişmə"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "dərləmə vasitələrinə yetişmə"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s artıq əlavə edilmişdir)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Zəif şifrə seçdiniz"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Xahiş edirik, bir istifadəçi adı alın"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"İstifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
-"ola bilər"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "İstifadəçi adı çox uzundur"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Bu istifadəçi adı onsuzda əlavə edilib"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "İstifadəçini əlavə et"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir istifadəçi daxil edin\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Qurtardı"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "İstifadəçini qəbul et"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Həqiqi ad"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Giriş adı"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Qabıq"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Timsal"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Avtomatik Giriş"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Kompüteriniz istifadəçinin avtomatik giriş etməsi üçün qurğulana bilər."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Bu xüsusiyyəti istifadə etmək istəyirsiniz?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Bəli"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Xeyir"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Əsas istifadəçini seçin:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "İşlətmək istədiyiniz pəncərə idarəçisini seçin:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Xahiş edirik, istifadə ediləcək dili seçin."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "Dil seçkisi"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Mandriva Linux müxtəlif dilləri dəstəkləyir. Qurmaq istədiyiniz\n"
-"dilləri seçin. Onlar qurulum tamamlanandan və sistem yenidən\n"
-"başlayandan sonra istifadəyə hazır olacaqlar."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Ön qurğulu olaraq Yunikod işlət"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Bütün dillər"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Ölkə / Bölgə"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Xahiş edirik, ölkənizi seçin."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Bütün mövcud ölkələrinn siyahısı"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "Diqər Ölkələr"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Ətraflı"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "Giriş yöntəmi:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Heç biri"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Bölüşmə yoxdur"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Bütün istifadəçilərə icazə ver"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"İstifadəçilərə onların bə'zi qovluqlarını bölüşmə icazəsi vermək "
-"istəyirsiniz?\n"
-"Buna icazə versəniz, istifadəçilər konqueror və nautilus'dakı \"Bölüş\"\n"
-"menyusundan qovluqlarını bölüşdürə bilərlər.\n"
-"\n"
-"\"Xüsusi\" seçənəyi, hər istifadəçiyə fərqli icazə vermək üçün istifadə "
-"edilir.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-"NFS ya da SMB işlədərək ixrac edə bilərsiniz. Xahiş edirik, işlətmək "
-"istədiyinizi seçin."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Userdrake-ni başlat"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Bağla"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"İstifadəçi başına bölüşmə \"fileshare\" qrupunu istifadə edir. \n"
-"Bu qrupa istifadəçiləri əlavə etmək üçün userdrake'dən istifadə edə "
-"bilərsiniz. "
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Yerli fayl"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr ""
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Windows Domeni"
-
-#: authentication.pm:29
-#, fuzzy, c-format
-msgid "Active Directory with SFU"
-msgstr "Bütün ehtiyat nüsxələri geri yüklə"
-
-#: authentication.pm:30
-#, fuzzy, c-format
-msgid "Active Directory with Winbind"
-msgstr "Bütün ehtiyat nüsxələri geri yüklə"
-
-#: authentication.pm:56
-#, fuzzy, c-format
-msgid "Local file:"
-msgstr "Yerli fayllar:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Windows Domeni:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, fuzzy, c-format
-msgid "Active Directory with SFU:"
-msgstr "Bütün ehtiyat nüsxələri geri yüklə"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, fuzzy, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Bütün ehtiyat nüsxələri geri yüklə"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Tanıtma LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Əsas dn"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Vericisi"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "bəsit"
-
-#: authentication.pm:102
-#, fuzzy, c-format
-msgid "TLS"
-msgstr "LSB"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, fuzzy, c-format
-msgid "Authentication Active Directory"
-msgstr "Tanıtma yöntəmi"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Domen"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Verici"
-
-#: authentication.pm:115
-#, fuzzy, c-format
-msgid "LDAP users database"
-msgstr "Mə'lumat Bazası"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, fuzzy, c-format
-msgid "Password for user"
-msgstr "Şifrə lazımdır"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Enkripsiya"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Səlahiyyətləndirmə NIS"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS sahəsi"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS Verici"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"W2K PDC üçün bunun işləməsi üçün, idarəçi C:\\>net localgroup \"Pre-Windows "
-"2000 Compatible Access\" everyone /əmrini verib vericini yenidən "
-"başlatmalıdır.\n"
-"Onun, eyni zamanda sistemi Windows(TM) domeninə calamaq üçün Domen "
-"İdarəçisinin istifadəçi adı/şifrəsinə ehtiyacı olacaq.\n"
-"Əgər şəbəkə hələ quraşdırılmayıbsa DrakX şəbəkəni quraşdırdıqdan sonra "
-"domenə calama üçün cəhd edəcək.\n"
-"Əgər bu qurğu ya da domen səlahiyyətləndirilməsi işləməzsə, sistemin yenidən "
-"başladılmasından sonra Windows(tm) Domeninizi və İdarəçi istifadəçi adı/"
-"şifrəsini işlədərək'smbpasswd -j DOMEN -U İSTİFADƏÇİ%%ŞİFRƏ' əmrini icra "
-"edin.\n"
-"'wbinfo -t' əmri səlahiyyət sirrlərinin düzgün olub olmamasını yoxlayacaq."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Windows Domen Səlahiyyətləndirilməsi"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Domen İdarəçisinin İstifadəçi Adı"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Domen İdarəçi Şifrəsi"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, fuzzy, c-format
-msgid "Default Idmap "
-msgstr "Əsas masa üstü"
-
-#: authentication.pm:171
-#, fuzzy, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr "Ali istifadəçi şifrəsi və şəbəkə icazə yöntəmlərini tə'yin et"
-
-#: authentication.pm:172
-#, fuzzy, c-format
-msgid "Set administrator (root) password"
-msgstr "Ali istifadəçi şifrəsini tə'yin et"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Tanıtma yöntəmi"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Şifrə olmasın"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Bu şifrə çox qısadır (ən az %d hərf böyüklüyündə olmalıdır)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Tanıtma"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "NIS domeni olmayan translasiya işlədilə bilməz"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "Qrafiki menyulu LILO"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "Mətn menyulu LILO"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "/boot içində lazımi yer yoxdur"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Sistem yükləyicisini %s bölməsinə qura bilməzsiniz\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "Sistem Yükləyicisini Yenidən Qur"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d dəqiqə"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 dəqiqə"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d saniyə"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu əksikdir"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "konsol yardımçısı əksikdir"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Avstriya"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Avstraliya"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Belçika"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Braziliya"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Kanada"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "İsveçrə"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Kosta Rika"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Çex Respublikası"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Almanya"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Danimarka"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estoniya"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "İspaniya"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finlandiya"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Fransa"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Yunanıstan"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Macarıstan"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "İrlandiya"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "İsrail"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "İtaliya"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Yaponiya"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Hollandiya"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Norvegiya"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Yeni Zellandiya"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Polşa"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portuqaliya"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rusiya"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "İsveç"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slovakiya"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Tayland"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Tayvan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Cənubi Afrika"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Birləşmiş Ştatlar"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV, bir vericinin cərgəsini yerli bir qovluğa bağlamanıza və ona yerli\n"
-"fayl sistemi kimi rəftar etməyə imkan tanıyan protokoldur (verici WebDAV\n"
-"olaraq quraşdırılmalıdır). İndi WebDAV bağlama nöqtələri əlavə etmək\n"
-"üçün, \"Yeni\" düyməsinə basın."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Yeni"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Ayır"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Bağla"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Bağlama nöqtəsi"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Xahiş edirik, WebDAV vericisi URL-ni daxil edin"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL http:// ya da https:// ilə başlamalıdır"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Verici:"
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Bağlama nöqtəsi: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Seçimlər: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Əvvəlcə datanızın yedəyini alın"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Aboot istifadə etmək istəyirsinizsə, boş disk sahəsi (2048 sektor "
-"kifayətdir.)\n"
-"buraxmağı unutmayın."
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Sehirbaz"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Gedişatı seçin"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Tək bir böyük Microsoft Windows disk bölməniz var.\n"
-"Əvvəlcə bu disk bölməsinin böyüklüyünü dəyişdirməyi\n"
-"məsləhət edirik. (Bölməni seçib, \"Böyüklüyü\n"
-"Dəyişdir\" düyməsinə tıqlayın)"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Xahiş edirik, bir bölmə üstünə tıqlayın"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Ətraflı"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Sabit disk(lər) tapıla bilmədi"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Dəyiş-toqquş"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Boş"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Fayl sistemi növü:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Yerinə ``%s'' işlət"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Yarat"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Növ"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Sil"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Əvvəlcə ``Ayır'-ı işlət"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Başqa bölmə seçin"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Bölmə seçin"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Çıxış"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Geri al"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Normal moda keç"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Mütəxəssis moduna keç"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Davam edilsin?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Qeyd etmədən Çıx"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Bölmə cədvəli qeyd edilmədən çıxılsın?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Dəyişikliklər /etc/fstab faylına qeyd edilsin?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölmə cəvəlindəki dəyişikliklərin tətbiq edilməsi üçün kompüterinizi yenidən "
-"başlatmalısınız."
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Hamısını təmizlə"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Avtomatik ayır"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Daha Çox Seçim"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Sabit disk mə'lumatı"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Bütün birinci bölmələr istifadədədir"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Artıq bölmə yaratmaq üçün, bir bölməni silib uzadılmış bölmə yaradın"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Bölmə cədvəlini qeyd et"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Bölmə cədvəlini geri al"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Bölmə cədvəlini yenidən yüklə"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Fayl seç"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Ehtiyat bölmə cədvəli eyni böyüklüyə sahib deyil\n"
-"Davam etmək istəyirsiniz?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Bölmə cədvəli qurtarılmaya cəhd edilir"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Ətraflı mə'lumatı"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Böyüklüyünü Dəyişdir"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Şəkilləndir"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "RAIDə əlavə et"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "LVMə əlavə et"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "RAİD'dən ayır"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "LVMdən ayır"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "RAIDi dəyişdir"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Loopback üçün istifadə et"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Yeni bölmə yarat"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Başlanğıç sektoru: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "MB cinsindən böyüklük: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Fayl sistemi növü: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Seçim: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Məntiqi həcm adı"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"Yeni bölmə yarada bilməzsiniz\n"
-"(ona görə ki siz maksimal birinci bölmə ədədinə yetişdiniz).\n"
-"Əvvəlcə birinci bölməni silib, ondan sonra genişləndirilmiş bölmə yaradın."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Loopback faylı silinsin?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsinin növünü dəyişdirdikdən sonra, bu bölmədəki bütün mə'lumatlar "
-"itiriləcək"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Bölmə növünü Dəyişdir"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Hansı dili istəyirsiniz?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "ext2'dən ext3'ə keçilir"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "%s loopback faylını haraya bağlamaq istəyirsiniz?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s avadanlığını haraya bağlamaq istəyirsiniz?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Bu disk bölməsi loopback üçün istifadə edildiyinə görə bağlanma nöqtəsindən "
-"ayrıla bilinmir.\n"
-"Əvvəlcə loopback-i silin."
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "%s avadanlığını hara bağlamaq istəyirsiniz?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Ölçüləndirilir"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Fat fayl sistemi ucları hesaplanır"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Bu bölmə ölçüləndirilə bilməz"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölmədəki bütün mə'lumatların ehtiyat nüsxələri alınmalıdır"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsinin ölçüləndirildikdən sonra bu bölmədəki bütün mə'lumatlar itəcək"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Yeni böyüklüyü seçin"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "MB cinsindən yeni böyüklük: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"Bölmə(lər)in böyüklüyünün dəyişdirilməsindən sonra mə'lumat \n"
-"bütövlüyünü qorumaq üçün fayl sistemi yoxlamaları bir sonrakı\n"
-"Windows(TM) açılışınızda işə salınacaq."
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Əlavə etmək üçün mövcud bir RAİD seçin"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "yeni"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Əlavə etmək üçün mövcud bir LVM seçin"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "LVM adı?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Bu disk bölməsi loopback üçün işlədilə bilməz"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback fayl adı: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Fayl adı verin"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Fayl başqa bir loopback tərəfindən istifadədədir, başqasını seçin"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Fayl onsuz da mövcuddur. İşlədilsin?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Bağlama seçimləri"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Müxtəlif"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "avadanlıq"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "səviyyə"
-
-#: diskdrake/interactive.pm:1023
-#, fuzzy, c-format
-msgid "chunk size in KiB"
-msgstr "parça böyüklüyü"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Diqqətlı olun: bu əməliyyat təhlükəlidir."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Hansı növ bölmələndirmə?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni qurğuların fəallaşmağı üçün sistemi yenidən başlatmalısınız"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sürücüsünün bölmə cədvəli diskə yazılacaq!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi şəkilləndirildikdən sonra bu bölmədəki bütün mə'lumatlar itəcək."
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Faylları yeni bölməyə daşı"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Faylları gizlət"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"%s cərgəsi onsuzda mə'lumat daxil edir\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Fayllar yeni bölməyə daşınır"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "%s köçürülür"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "%s silinir"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "%s bölməsi indi %s olaraq bilinir"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Avadanlıq: "
-
-#: diskdrake/interactive.pm:1187
-#, fuzzy, c-format
-msgid "Devfs name: "
-msgstr "Ev sahibi adı:"
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sürücü hərfi: %s (bir təxmindir)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Növ: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Ad: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Başlanğıc: sektor %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Böyüklüyü: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d'dən silindr %d'yə\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Şəkilləndirilmiş\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Şəkilləndirilməmiş\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Bağlı\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAİD %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback fayl(lar)ı:\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Əsas olaraq açılan bölmə\n"
-"    (MS-DOS açılışı üçün, lilo üçün deyil)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Səviyyə %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, fuzzy, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Parça böyüklüyü %s\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAİD-diskləri %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faylı adı: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Bu bölmə Sürücü bölməsidir.\n"
-"Bunu elə beləcə buraxın.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Bu, sisteminizin ikili açılışı üçün\n"
-"xüsusi Bootstrap bölməsidir.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Sırf oxuna bilən"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Böyüklük: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometriyası: %s silindr, %s baş, %s sektor\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Mə'lumat: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskləri %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölmə cədvəli növü: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "%d kanalında, %d id'li\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Fayl sistemi şifrələmə açarı"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Fayl sistemi şifrələmə açarınızı seçin"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Bu şifrələmə açarı çox sadədir (ən az %d hərf böyüklüyündə olmalıdır)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Şifrələmə açarları uyğun gəlmir"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Şifrələmə açarı"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Şifrələrmə açarı (təkrar)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Şifrələmə alqorifması"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Növünü dəyişdir"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "%s istifadəçi adı ilə giriş edilə bilmir (şifrəniz səhvdir?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Domen Səlahiyyətləndirməsi Məcburidir"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Hansı istifadəçi adı"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Başqa birisi"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Xahiş edirik, bu qovşağa yetişə bilmək üçün istifadəçi adını, şifrəni və "
-"domen adını girin."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "İstifadəçi adı"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Vericiləri axtar"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Yeni vericiləri axtar"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "%s paketi qurulmalıdır. Qurmaq istəyirsiniz?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Vacib olan %s paketi əksikdir"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Paketlər qurulur..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "Paketlər silinir..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "%s bölməsi bağlanır"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "%s bolməsini %s cərgəsinə bağlama bacarılmadı"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "%s yoxlanır"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrılırkən xəta oldu: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "%s dəyiş-toqquş sahəsi fəallaşdırılır"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s bölməsi şəkilləndirilir"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s faylı yaradılır və şəkilləndirilir"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "%s-i necə şəkilləndirəcəyimi bilmirəm (Növ: %s)"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s şəkilləndirilməsində %s bölmə xətası"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"Bu fayl sistemi üstündəki inode yetişmə vaxtlarını yeniləmə\n"
-"(mis,xəbərlər vericisini tezləşdirmək üçün)."
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"Yalnız dəqiq olaraq bağlana bilər (mis.,\n"
-" -a seçimi fayl sisteminin bağlanmasına səbəb olmayacaq)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-"Fayl sistemi üstündə hərfləri çevirmə və xüsusi avadanlıqları bloklama."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"Bağlı fayl sistemi üstündəki ikili faylların icra edilməsinə icazə vermə\n"
-"Bu, öz me'marisi xaricindəki fayl sistemləri üçün icra edilə bilən faylları "
-"daxil\n"
-"edən bir verici üçün faydalı ola bilər."
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"set-user-identifierya da set-group-identifier fəaliyyətlərinə\n"
-"icazə vermə. (Bu e'tibarlı görsənir, yalnız sisteminizdə suidperl(1)\n"
-"quruludursa təhlükəli ola bilər.)"
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Fayl sistemini ancaq oxuna bilən şəkildə bağla."
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "Fayl sisteminə bütün G/Ç'lar sinxron olaraq yerinə gətirilməlidir."
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"Sıravi istifadəçiyə fayl sistemini bağlama (mount) etmə icazəsi ver.\n"
-"Bağlama hüququ olan istifadəçinin adı daha sonra fayl sistemi ayıra bilməsi "
-"üşün mtab faylına qeyd edilir.\n"
-"Bu seçim noexec, nosuid, və nodev seçimlərini nəzərə alır."
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "Sıravi istifadəçilərə yazma səlahiyyəti ver"
-
-#: fs/mount_options.pm:144
-#, fuzzy, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "Sıravi istifadəçilərə yazma səlahiyyəti ver"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "16MB'dan kiçik disk bölmələrində JFS istifadə edə bilməzsiniz"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB'dən kiçik disk bölmələrində ReiserFS istifadə edə bilməzsiniz"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "/usr ilə"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "verici"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"%s avadanlığının bölmə cədvəli oxuna bilmir, dəyəsən biraz xarab olub.\n"
-"Xarab olmuş bolmələr düzəldilməyə cəhd ediləcək, ancaq bütün mə'lumatlar\n"
-"itəcək. Başqa bir yol isə DrakX'ə bölmə cədvəllərini yoxlama icazəsi "
-"verməməkdir.\n"
-"(xəta %s)\n"
-"\n"
-"Bütün bölmələri itirmək işinizə gəlir?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Bağlama nöqtələri / ilə başlamalıdır"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Bağlama nöqtələri ancaq alfanumerik hərf daxil edə bilər"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Onsuz da bağlama nöqtəsi %s olan bölmə mövcuddur\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Bir proqram tə'minatlı RAİD bölməsini kök cərgəsi (/) olaraq tə'yin\n"
-"etdiniz. /boot bölməsi olmadan heç bir açılış yükləyicisi bunu aça bilməz.\n"
-"Xahiş edirik, /boot bölməsini əlavə etməyi unutmayın"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "%s bağlama nöqtəsi üçün LVM Məntiqi Həcmini istifadə edə bilməzsiniz"
-
-#: fsedit.pm:409
-#, fuzzy, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Bir proqram tə'minatlı RAİD bölməsini kök cərgəsi (/) olaraq tə'yin\n"
-"etdiniz. /boot bölməsi olmadan heç bir açılış yükləyicisi bunu aça bilməz.\n"
-"Xahiş edirik, /boot bölməsini əlavə etməyi unutmayın"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-"Lilo'nu qura bilməyəcəksiniz (ona görə ki, lilo, birdən çox PV üstündə LV'yə "
-"malik deyil)"
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Bu bağlama nöqtəsi üçün həqiqi bir fayl sisteminə (ext2/ext3, reiserfs, xfs, "
-"ya da jfs)ehtiyacınız var\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-"%s bağlama nöqtəsi üçün şifrələnmiş fayl sistemi istifadə edə bilməzsiniz"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Avtomatik yerləşdirmə üçün kifayət qədər boş sahə yoxdur"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Ediləcək heçnə yoxdur"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Disket"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Hard Disk"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CDROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD yazıcılar"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Kaset"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Video kartı"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "Televiziya kartı"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Digər Multimediya avadanlıqları"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Səs kartı"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Veb kamerası"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "İşlədicilər"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "ISDN adapterləri"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Eternet Kartı"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "ADSL adapterləri"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Yaddaş"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "AGP idarəçiləri"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Çapçı"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Oyun Çubuğu"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA idarəçiləri"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAİD idarəçiləri"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)İDE/ATA idarəçiləri"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire idarəçiləri"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCİA idarəçiləri"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSİ idarəçiləri"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "USB idarəçiləri"
-
-#: harddrake/data.pm:421
-#, fuzzy, c-format
-msgid "USB ports"
-msgstr "USB çapçı"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus idarəçiləri"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Körpülər və sistem idarəçiləri"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Klaviatura"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Siçan"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Darayıcı"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Na'məlum/Digərləri"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Xahiş edirik, gözləyin... Qurğular tətbiq edilir"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Alternativ sürücü yoxdur"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Hazırda \"%2$s\" işlədən %1$s səs kartınız üçün bilinən başqa OSS/ALSA "
-"sürücü mövcud deyil"
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Səs quraşdırılması"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Burada siz (%s) səs kartınız üçün alternativ sürücü (ya OSS ya da ALSA) seçə "
-"bilərsiniz."
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Səs kartınız hazırda %s\"%s\" sürücüsünü işlədir (kartınızın əsas sürücüsü "
-"\"%s\"dir)"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) ilk səs API'si idi. Bu, ƏS'dən müstəqil səs "
-"API'sidirvə bütün UNIX(tm) sistemlərdə mövcuddur. Yalnız, bu çox bəsit "
-"vəməhdudlaşdırılmış API'dir.\n"
-"Dahası, OSS sürücülərinin hamısı təkəri yenidən kəşf edir.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) geniş silsilə İSA, USB və PCİ "
-"kartlarını dəstəkləyən modullaşdırılmış me'maridir.\n"
-"\n"
-"O, eyni zamanda OSS'dən daha qüvvətli API təşkil edir.\n"
-"\n"
-"Alsanı işlətmək üçün bunlardan biri ola bilər:\n"
-"- köhnə OSS API'si\n"
-"- yeni ALSA API'si.\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Sürücü:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Problem həlli"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Xəbərdarlıq"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"Köhnə \"%s\" sürücüsü artıq qara siyahıdadır.\n"
-"\n"
-"O çəyirdəyin açılması sırasında xətalar yaradır.\n"
-"\n"
-"Növbəti açılışda ancaq \"%s\" sürücüsü istifadə ediləcək."
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Açıq mənbəli sürücü yoxdur"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"(%s) səs kartınız üçün pulsuz sürücü mövcud deyil, ancaq \"%s\" ünvanında "
-"lazım olan sürücünü tapa bilərsiniz."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Bilinən sürücü yoxdur"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Sizin (%s) səs kartınız üçün sürücü mövcud deyil"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Namə'lum sürücü"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Xəta: Səs kartınız üçün \"%s\" sürücüsü siyahıda yoxdur"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Səs problemini həll et"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Klasik xəta səs sınaqı aşağıdakı əmrləri icra edir:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" səs kartınızın əsas olaraq hansı\n"
-"sürücünü işlətdiyini bildirir\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" hazırda işlədilən sürücünü\n"
-"bildirir\n"
-"\n"
-"- \"/sbin/lsmod\" modulun (sürücünün) yüklü olub olmadığını yoxlamaq\n"
-"üçün sizə imkan verir\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" və \"/sbin/chkconfig --list alsa\" səs "
-"və\n"
-"alsa xidmətlərinin initsəviyyəsi3'də işə salınıb salınmayacağını bildirir\n"
-"\n"
-"- \"aumix -q\" səs həcminin bağlı (mute) olub olmadığını bildirir\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" hansı proqramın səs kartını işlətdiyini "
-"bildirir.\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "İstədiyim sürücünü seçməyə icazə ver"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Səbəbsiz bir sürücü seçilir"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Kartınız üçün hansı sürücünün uyğun gəldiyini dəqiq bilirsinizsə yuxarıdakı\n"
-"siyahıdan birisini seçə bilərsiniz.\n"
-"\n"
-"\"%s\" səs kartınız üçün hazırkı sürücü \"%s\"dir"
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Avtomatik təsbit et"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Namə'lum|Ümumi"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Namə'lum|CPH05X (bt878) [çox satıcı]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Namə'lum|CPH06X (bt878) [çox satıcılı]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Müasir televiziya kartlarının bir çoxu üçün, GNU/Linuks çəyirdəyinin bttv "
-"modulu düzgün parametrləri avtomatik tapır.\n"
-"Əgər kartınız tapıla bilməsə, buradan düzgün kart növünü seçə bilərsiniz. "
-"Lazım olanda televiziya kartınızın parametrlərini seçin."
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Kart modeli:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Tuner növü:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "Yaxalama bufferlərinin ədədi:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "mmap'lanmış yaxalama üçün yaxalama buferlərinin miqdarı"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL qurğusu:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Radio dəstəyi:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "radio dəstəyini fəallaşdır"
-
-#: help.pm:11
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Davam etmədən əvvəl, diqqətlə lisenziyanın qaydalarını oxumalısınız. O,\n"
-"bütün Mandriva Linux distribusiyasını əhatə edir. Əgər lisenziyadakı bütün\n"
-"qaydalarla razısınızsa, qutusunu \"%s\" işarələyin. Əgər razı deyilsəniz, "
-"sadəcə olaraq kompüterinizi bağlayın."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Qəbul Et"
-
-#: help.pm:17
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"GNU/Linuks çox istifadəçili əməliyyat sistemidir, bu da o deməkdir ki\n"
-"hər istifadəçinin öz xüsusi seçimləri, faylları və s. ola bilər. Ancaq \n"
-"sistem idarəçisi olan \"ali istifadəçi\" xaricindəki indi əlavə edəcəyiniz\n"
-"istifadəçilər öz faylları və qurğuları xaricində sistemin heç bir təhlükəli\n"
-"yeri ilə iş görə bilməz və beləcə də sistem istənməyən pozulmalara qarşı\n"
-"qorunmuş olacaq. Ən az bir dənə sıravi istifadəçi yaradmalısınız və bu "
-"hesabı\n"
-"gündəlik işləriniz üçün istifadə etməlisiniz. Ali İstifadəçi olaraq giriş "
-"etmək də\n"
-"olduqca asanddır ancaq bu eyni zamanda çox təhlükəlidir. Çox kiçik bir xəta "
-"ilə\n"
-"sistemi qeyri-fəal vəziyyətə gətirə bilərsiniz. Ancaq sıravi istifadəçi "
-"olaraq xəta\n"
-"ediləndə ancaq bəzi mə'lumatları itirəcək, sisteminiz yenə də sağlam \n"
-"qalacaqdır.\n"
-"\n"
-"Birinci sahə sizdən adı soruşacaq. Əlbəttə ki bunu yazmaq məcburi deyil. \n"
-"Oraya istədiyiniz kəlmələri yaza bilərsiniz. DrakX buraya yazdığınız "
-"kəlmələrin\n"
-"ilk kəlməsini alıb \"%s\" sahəsinə köçürəcək, bu istifadəçinin sistemə "
-"girmək\n"
-"üçün işlədəcəyi istifadəçi adı olacaq. İstəsəniz bunu da dəyişdirə "
-"bilərsiniz.\n"
-"Sonrakı addım şifrə girməkdir. Təhlükəsizlik nəzər nöqtəsindən şifrəsi "
-"olmayan\n"
-"sıravi istifadəçi ali istifadəçi qədər səlahiyyətli ola bilməz ancaq yenə də "
-"sizə\n"
-"hər bir istifadəçiyə tapılması asand olmayan bir şifrə tə'yin etmənizi \n"
-"məsləhət görürük\n"
-"\n"
-"\"%s\" basdıqdan sonra başqa istifadəçiləri də əlavə edə bilərsiniz. Hər "
-"dostunuz\n"
-"üçün bir istifadəçi əlavə edin, misal üçün atanız, qardaşınız kimi. "
-"İstifadəçiləri əlavə \n"
-"etməyi bitirəndə \"%s\" düyməsinə basın.\n"
-"\n"
-"\"%s\" düyməsi istifadəçinin işlədəcəyi qabığı dəyişdirmək üçündür. \n"
-"(əsas olan bash qabığıdır).\n"
-"\n"
-"İstifadəçiləri əlavə edib bitirəndə sizə kompüteriniz açılanda hansı "
-"istifadəçinin\n"
-"avtomatik olaraq sistemə daxil etmək istədiyiniz sualı veriləcəkdir. Əgər "
-"bu\n"
-"xüsusiyyət xoşunuza gəlirsə və təhlükəsizlik haqqında elə də "
-"maraqlanmırsınızsal\n"
-"istədiyiniz istifadəçini və pəncərə idarəçisini seçib \"%s\" düyməsinə "
-"basın.\n"
-"Əgər bu xassə sizi maraqlandırmırsa \"%s\" qutusunun seçimini silin."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "İstifadəçi adı"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Sonrakı"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Burada sürücünüzdə tapılan Linuks bölmələri sıralanıb.\n"
-"Sehirbazın məsləhətlərinə qulaq asın, onlar çox vaxt işə yarayır.\n"
-"Əgər hər hansı bir dəyişiklik etsəniz ən azından kök bölməsini (\"/\") "
-"müəyyən\n"
-"etməlisiniz. Çox kiçik bölmə seçməyin, yoxsa kifayət qədər proqram "
-"tə'minatı\n"
-"qura bilməyəcəksiniz. Əgər mə'lumatlarınızı başqa bölmədə tutmaq "
-"istəyirsinizsə,\n"
-"o zaman bir də \"/home\" bölməsi yaratmalısınız (yalnız birdən çox Linuks\n"
-"bölməniz var isə mümkündür).\n"
-"\n"
-"Hər bölmə bu cür sıralanıb; \"Ad\",\"Həcm\".\n"
-"\n"
-"\"Ad\" bu cür qurulub: \"sabit disk növü\", \"sabit disk nömrəsi\",\n"
-"\"bölmə nömrəsi\" (məsələn, \"hda1\").\n"
-"\n"
-"\"Sabit disk növü\" diskiniz İDE sürücüsü isə \"hd\"dir, SCSİ sürücüsü isə\n"
-"\"sd\"dir.\n"
-"\n"
-"\"Sabit disk nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir. İDE \n"
-"sürücülər üçün:\n"
-"\n"
-"* \"a\" mə'nası \"birinci İDE idarəçisində ali (master) sürücü\",\n"
-"\n"
-"* \"b\" mə'nası \"birinci İDE idarəçisində qul (slave) sürücü\",\n"
-"\n"
-"* \"c\" mə'nası \"ikinci İDE idarəçisində ali (master) sürücü\",\n"
-"\n"
-"* \"d\" mə'nası \"ikinci İDE idarəçisində qul (slave) sürücü\".\n"
-"\n"
-"\n"
-"SCSİ sürücülərində, \"a\"nın mə'nası \"ən düşük SCSİ ID\",\n"
-"\"b\"nin mə'nası \"ikinci ən düşük SCSİ ID\"dir, vs..."
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Mandriva Linux qurulumu müxtəlif CD-lər üstündə gəlir. DrakX\n"
-"seçili paketlərin hansı CD'də olduğunu bilir ona görə də lazım olanda\n"
-"hazırkı CD-ni çıxardıb sizdən lazım olan CD-ni daxil etməyi istəyəcək.\n"
-"Əgər əlinizin altında istənən CD yoxdursa \"%s\" düyməsinə basın və istənən\n"
-"paketlər qurulmayacaqdır."
-
-#: help.pm:92
-#, fuzzy, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"İndi sisteminizə qurmaq istədiyiniz proqramları müəyyən etmə vaxtıdır.\n"
-"Mandriva Linux daxilində minlərcə proqram mövcuddur və idarələrinin\n"
-"asan olması üçün onlar bənzər paketlər qruplarına ayrılıblar.\n"
-"\n"
-"Paketlər sisteminizin xüsusui istifadə sahəsinə görə qruplanıb.\n"
-"Mandriva Linuxda dörd əvvəldən müəyyən edilmiş qurulum növü mövcuddur.\n"
-"Yalnız siz bu qrupları yenə də qarışdıra bilərsiniz və istədiyiniz əlavə.\n"
-"proqramları seçə bilərsiniz. Misal üçün ''İş Stansiyası'' qurulumu\n"
-"``İnkişaf'' qurulumundakı proqramları daxil edə bilər.\n"
-"\n"
-" * \"%s\": əgər sisteminiz iş stansiyası olaraq istifadə ediləcəksə, bu\n"
-"qrupda yer alan bir ya da daha çox proqramı seçin.\n"
-"\n"
-" * \"%s\": əgər sisteminizi proqramlaşdırma və inkişaf üçün işlədəcəksəniz,\n"
-"bu qrupdakı proqramları seçə bilərsiniz.\n"
-"\n"
-" * \"%s\": əgər sisteminiz verici olacaqsa, sisteminizə hansı xidmətləri\n"
-"qurmaq istədiyinizi buradan seçin.\n"
-"\n"
-" * \"%s\": qrafiki istifadəçi mühidini burada seçəcəksiniz. Əgər "
-"sisteminizdə\n"
-"qrafiki mühit işlətmək istəyirsinizsə ən az birisi seçilməlidir.\n"
-"\n"
-"Siçanın oxu qrup adının üstünə gələndə o qrup haqqında qısa izahat\n"
-"göstəriləcək. Əgər sistemi qurarkən bu qruplardan heç birini seçməsəniz\n"
-"minimal qurulum üçün fərqli seçimləri təqdim edən bir pəncərə\n"
-"göstəriləcək:\n"
-"\n"
-" * \"%s\": minimal ədəddə paket qur, işləyən qrafiki ara üzə malik\n"
-"olma mümkündür.\n"
-"\n"
-" * \"%s\": sistem bazası və əsas tə'minatlar və sənədləri qurulacaq.\n"
-"Bu qurulum növü verici quraşdırmaq üçün uyğundur.\n"
-"\n"
-" * \"%s\": işləyən Linuks sistemi üçün lazım olan ən minimal paketlər\n"
-"qurulacaq. Bu qurulum ilə yalnız əmr sətirinə malik olacaqsınız.\n"
-"Qurulumun ümumi böyüklüyü təqribən 65 meqabayt olacaq.\n"
-"\n"
-"Təklif edilən paketləri tanıyırsınızsa ya da qurulan hər paket üstündə\n"
-"tam idarə sahibi olmaq istəyirsinizsə\"%s\" qutusunu işarələyə bilərsiniz\n"
-"\n"
-"Əgər qurulumu \"%s\" modunda başlatmışsınızsa, yeni paketlərin\n"
-"qurulmasının qabağını almaq üçün bütün qrupların seçimini silə\n"
-"bilərsiniz. Bu əsasən sistem tə'mir edilirkən ya da yenilənirkən\n"
-"sərfəlidir."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "İş Stansiyası"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "İnkişaf"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Qrafiki Mühit"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Fərdi paket seçimi"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Yeniləmə"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "X ilə"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Əsas sənədlərlə birlikdə"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Həqiqətən minimal qurulum"
-
-#: help.pm:149
-#, fuzzy, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"Əgər qurulum proqramına paketləri ayrı ayrı seçmək istədiyinizi dedinizsə,\n"
-"o, qrup və alt qruplara ayrılmış paketləri ağac şəklində sizə göstərəcək.\n"
-"Bu ağacda gəzərkən, bütün qrupu, alt qrupu ya da paketləri ayrı ayrı seçə "
-"biləcəksiniz\n"
-"\n"
-"Hər paket seçişinizdə sağ tərəfdə bu paket ilə əlaqəli və onun nə işə\n"
-"yaradığını göstərən mə'lumat yer alacaq.\n"
-"\n"
-"!! Əgər paketin ya da paketin daxil oduğu alt qrupun seçilməsi ilə bir "
-"verici\n"
-"seçilsə, sizə bu vericini həqiqətən də qurmaq istədiyinizi soruşan və "
-"sizdən\n"
-"təsdiq istəyən pəncərə göstəriləcək. Əsas olaraq Mandriva Linux bütün "
-"qurulu\n"
-"olan xidmətləri açılışda fəal edir. Distribusiyanın çıxdığı vaxt onların "
-"bilinən heç bir\n"
-"xətası ya da təhlükəli yanı olmasa da, mümkündür ki, müəyyən vaxt sonra\n"
-"təhlükəsizlik nöqtələri aşkar edilə bilər. Əgər seçilən xidmətin nə etdiyini "
-"və nəyə\n"
-"yaradığını bilmirsinizsə, \"%s\" düyməsinə basın. \"%s\" düyməsini seçsəniz "
-"isə\n"
-"xidmət sisteminizə qurulacaq və sisteminizin açılışında fəal hala "
-"gətiriləcək.\n"
-"Qeyd: Xidmətlərin açılışda fəal olub olmamasını qurulum bitdikdən sonra da\n"
-"Mandriva Linux İdarə Mərkəzindən quraşdıra bilərsiniz!!\n"
-"\n"
-"\"%s\" seçimi, bir proqramı seçdiyiniz zaman qurulum proqramının o proqram "
-"ilə\n"
-"əlaqəli diqər paket ya da asıllılıqların avtomatik seçməsi üçündür.\n"
-"Bə'zi paketlər bir birindən aslıdır və birinin qurulması digərinin də "
-"qurulmasını\n"
-"məcbur qılır. Bu paketləri qurulum proqramı müvəffəqiyyətlə taparaq "
-"sisteminizə\n"
-"quracaq.\n"
-"\n"
-"Siyahının altındakı kiçik disket rəsmi isə daha əvvəlki qurulumda (əgər "
-"yaratmışsınızsa)\n"
-"yaradılan paket siyahısı faylını yükləmək üçündür. Bu, birdən çox kompüterə "
-"eyni\n"
-"paket ya da proqramları qurmaq istədiyiniz zaman çox əlverişlidir. Düyməyə\n"
-"basdıqdan sonra sizdən disketi daxil etməniz xahiş ediləcək.\n"
-"Belə bir disketi necə yaradılacağını bilmək istəyirsinizsə son qurulum "
-"addımının \n"
-"ikinci yardım abzasına baxa bilərsiniz."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "Avtomatik asıllılıqlar"
-
-#: help.pm:183
-#, fuzzy, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\":  \"%s\" düyməsinə basmaq çapçı quraşdırma sehirbazını başladacaq."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Qur"
-
-#: help.pm:189
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Bu dialoq, açılışda avtomatik olaraq başlamasını istədiyiniz xidmətləri \n"
-"seçmək üçündür.\n"
-"\n"
-"DrakX hazırkı qurulumda mövcud olan bütün xidmətləri siyahıda göstərəcək.\n"
-"Hər birini diqqətlə nəzərdən keçirin və açılış vaxtı ehtiyac hiss "
-"etmədiyiniz\n"
-"xidmətlərin qabağındakı seçimi silin.\n"
-"\n"
-" Siçan xidmətin üzərinə gələndə o xidmətin vəzifəsini başa salan mətn\n"
-"göstəriləcək. Yalnız, əgər xidmətin faydalı olub olmamasından əmin "
-"deyilsəniz\n"
-"ən yaxşısı onu olduğu kimi saxlamaq olacaq.\n"
-"\n"
-"!! Əgər kompüteriniz verici olaraq istifadə ediləcəksə, bu addıma diqqət\n"
-"ayırmalısınız: istəmədiyiniz xidmətləri başlanğıcda başlatmaq "
-"istəməyəcəksiniz.\n"
-"Diqqətinizdə saxlayın ki, bə'zi xidmətlər fəal isə, bu verici üstündə "
-"təhlükəli ola bilər.\n"
-"!!"
-
-#: help.pm:206
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"GNU/Linuks vaxtı GMT (Greenwich Mean Time) ilə idarə edir və onu yerli\n"
-"vaxtı seçdiyiniz vaxt zolağına bağlı olaraq seçir. Əgər ana kartınızın "
-"saatı\n"
-"yerli saata quraşdırılıbsa, bunu, \"%s\"i seçərək qeyri-fəallaşdıra "
-"bilərsiniz,\n"
-"Bu, Linuksa sistem vaxtı ilə avadanlıq vaxtının eyni vaxt zolağında "
-"olduğunu\n"
-"bildirəcək. Bu, sistemdə Windows kimi digər əməliyyat sistemi mövcuddursa\n"
-"faydalıdır.\n"
-"\n"
-"\"%s\" seçimi isə, saatınızı internetdəki uzaq zaman vericisinə bağlanaraq\n"
-"düzəldəcək. Bu xüsusiyyətin işləməsi üçün, internet bağlantınız olmalıdır.\n"
-"Sizə ən yaxın olan vericini seçmək məsləhət edilir.\n"
-"Bu seçim əslində yerli şəbəkənizdəki başqa kompüterlərin də istifadə edə\n"
-"biləcəyi zaman vericisini qurur."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Avadanlıq saatı GMT'yə görə quruludur"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Avtomatik zaman sinxronlaşdırılması"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"Səs Kartı\n"
-"\n"
-"   Qurulum proqramı sisteminizə bağlı olan səs kartını əsasən avtomatik "
-"olaraq\n"
-"aşkar edəcəkvə quraşdıracaq. Əgər səhv tapılsa həqiqətən sisteminizə bağlı "
-"olan\n"
-"səs kartını siyahıdan seçə bilərsiniz. \n"
-"   Əgər kartınız üçün həm 3D dəstəyi olan həm də olmayan vericilər "
-"mövcudsa,\n"
-"sizdən ehtiyaclarınıza ən gözəl cavab verən vericini seçməniz xahiş ediləcək."
-
-#: help.pm:231
-#, fuzzy, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"X (X Pəncərə Sistemi) GNU/Linuks qrafiki ara üzünün qəlbidir.\n"
-"Mandriva Linuxla bərabər gələn qrafiki mühitlərin hamısı (KDE, \n"
-"GNOME, AfterStep, WindowMaker, vs.) buna bağlıdır.\n"
-"\n"
-"Optimal görünüşü almaq üçün sizə dəyişdiriləcək fərqli parametrlər\n"
-"təqdim ediləcək.\n"
-"\n"
-"   Qurulum proqramı sisteminizə bağlı olan qrafika kartını əsasən avtomatik "
-"olaraq\n"
-"aşkar edəcək və quraşdıracaq. Əgər səhv tapılsa həqiqətən sisteminizə bağlı "
-"olan\n"
-"səs kartını siyahıdan seçə bilərsiniz.\n"
-"   Əgər kartınız üçün həm 3D dəstəyi olan həm də olmayan vericilər "
-"mövcudsa,\n"
-"sizdən ehtiyaclarınıza ən gözəl cavab verən vericini seçməniz xahiş "
-"ediləcək.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Qurulum proqramı sisteminizə bağlı olan monitoru əsasən avtomatik olaraq\n"
-"aşkar edəcək və quraşdıracaq. Əgər səhv tapılsa həqiqətən sisteminizə bağlı "
-"olan\n"
-"monitoru siyahıdan seçə bilərsiniz.\n"
-"\n"
-"\n"
-"Həlledilirlik\n"
-"\n"
-"   Burada avadanlığınız üçün mümkün olan həlledilirlik və rəng "
-"dərinliklərini\n"
-"seçə bilərsiniz. Ehtiyaclarınıza ən gözəl cavab verəni seçin. (Bunları "
-"qurulum\n"
-"tamamlandıqdan sonra da dəyişdirə biləcəksiniz). Seçilən qurğuların bir\n"
-"nümunəsi monitorda göstərilir.\n"
-"\n"
-"\n"
-"\n"
-"Sınaq\n"
-"\n"
-"   Sistem, seçilən həlledilirlikdə qrafiki ekranı açmağa cəhd edəcək.\n"
-"Əgər sınaq sırasında ismarışı görüb \"%s\" düyməsinə bassanız, DrakX\n"
-"növbəti mərhələyə keçəcək. Əgər ismarışı görə bilmirsinizsə, bu avtomatik\n"
-"aşkar edilən quraşdırmanın bir hissəsi səhvdir və sınaq 12 saniyə sonra\n"
-"sonlanaraq sizi menyuya geri götürəcək.\n"
-"Düzgün qrafiki görünüş alana qədər qurğuları dəyişdirin.\n"
-"\n"
-"\n"
-"\n"
-"Seçimlər\n"
-"\n"
-"   Burada, sisteminiz başlarkən avtomatik olaraq qrafiki ekrana keçməsini\n"
-"seçə bilərsiniz. Yalnız, əgər sisteminiz bir verici olacaqsa ya da ekran "
-"qurğularını\n"
-"müvəffəqiyyətlə sazlaya bilmədinizsə hər halda \"%s\" seçimini seçmək "
-"istəyəcəksiniz."
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Monitor\n"
-"\n"
-"   Qurulum proqramı sisteminizə bağlı olan monitoru əsasən avtomatik olaraq\n"
-"aşkar edəcək. Əgər səhv tapılsa həqiqətən sisteminizə bağlı olan monitoru\n"
-"siyahıdan seçə bilərsiniz."
-
-#: help.pm:295
-#, fuzzy, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Həlledilirlik\n"
-"\n"
-"   Burada, avadanlığınız üçün mövcud olan həlledilirlik və rəng "
-"dərinliklərini\n"
-"seçə bilərsiniz. Ehtiyacınıza ən yaxşı cavab verəni seçin (qurulumdan sonra\n"
-"bunu dəyişdirə biləcəksiniz). Seçilən qurğunun bir nümunəsi\n"
-"monitorda göstərilir."
-
-#: help.pm:303
-#, fuzzy, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"Əgər kartınız üçün həm 3D dəstəyi olan həm də olmayan vericilər mövcudsa,\n"
-"sizdən ehtiyaclarınıza ən gözəl cavab verən vericini seçməniz xahiş ediləcək."
-
-#: help.pm:308
-#, fuzzy, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Seçimlər\n"
-"\n"
-"   Burada, sisteminiz başlarkən avtomatik olaraq qrafiki ekrana keçməsini\n"
-"seçə bilərsiniz. Yalnız, əgər sisteminiz bir verici olacaqsa ya da ekran "
-"qurğularını\n"
-"müvəffəqiyyətlə sazlaya bilmədinizsə hər halda \"%s\" seçimini seçmək "
-"istəyəcəksiniz."
-
-#: help.pm:316
-#, fuzzy, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"Bu nöqtədə Mandriva Linuxi sabit diskinizdə haraya quracağınıza\n"
-"qərar verəcəksiniz. Əgər diskiniz boş isə və ya bir başqa sistem\n"
-"bütün yeri doldurmuş isə, o zaman diskinizdə Mandriva Linux üçün\n"
-"yer açmalısınız. Bölmələndirmə əsasən diskinizdə Mandriva Linuxu\n"
-"qurmaqməntiqi sürücülər yaratmaqdan ibarətdir.\n"
-"\n"
-"Ümumiyyətlə bölmələndirmənin təsiri geri dönülməzdir və mə'lumat\n"
-"itirilməsinə səbəb ola bilər. Ona görə də əgər sisteminizdə başqa bir\n"
-"əməliyyat sistemi quruludursa və siz Linuksla yeni tanışırsınızsa bu iş\n"
-"çox gərgin və yorucudur. Ancaq DrakX sabit diski çox rahat bölmələndirməniz\n"
-"üçün çox sadə bir sehirbaz daxil edir. Başlamadan əvvəl xahiş edirik, "
-"buradakı\n"
-"mə'lumatları oxuyun, və bu iş üçün bir az vaxt ayırın.\n"
-"\n"
-"Sabit diskinizin qurğularına nəzarən birdən çox seçim mövcud ola bilər:\n"
-"\n"
-" * \"%s\": bu seçim boş sürücülərinizi avtomatik olaraq bölmələndirəcək\n"
-"Bu seçənəyi seçsəniz sizə heç bir sual verilməyəcək.\n"
-"\n"
-" * \"%s\": sehirbaz sabit diskinizdə bir ya da daha çox mövcud Linuks \n"
-"bölməsi aşkar edib. Onları istifadə etmək istəyirsinizsə bu seçənəyi "
-"işlədin.\n"
-"Daha sonra hər bölmə ilə əlaqələndirilmiş bağlama nöqtəsi seçəcəksiniz.\n"
-"Əvvəldən qalan bağlama nöqtələri əsas olaraq seçilidir və onları eləcə də\n"
-"saxlamaq gözəl fikirdir.\n"
-"\n"
-" * \"%s\": sabit diskinizdə Microsoft Windows quruludur və üstündəki bütün\n"
-" sahəni əhatə edir, bu vəziyyətdə siz Linuks üçün boş yer ayırmalısınız.\n"
-"Bunu etmək üçün Microsoft Windows bölməsini və mə'lumatlarını silə "
-"bilərsiniz.\n"
-"(baxın ``Bütün diski sil'' həlli) ya da Microsoft Windows FAT ya da NTFS "
-"bölmənizin\n"
-" böyüklüyünü dəyişdirə bilərsiniz. Ölçüləndirmə qaydalara riayət edilərsə "
-"heç bir mə'lumat\n"
-"itirilməsinə yol açmaz. Qaydalar isə əvvəlcədən Windows bölməniz üstündə "
-"'Scandisk' və\n"
-"'Defraq' əmrlərinin icra edilməsinir. Eyni zamanda mə'lumatlarınızın ehtiyat "
-"nüsxəsini almayı\n"
-"da qətiyyən unutmayın. Kompüteriniz üstündə həm Mandriva Linux həm də "
-"Microsoft\n"
-"Windows ƏS'lərini işlətmək istəyirsinizsə bu seçənəyi seçin. Unutmayın ki "
-"Microsoft\n"
-"Windows bölmənizin böyüklüyünü Windows altında da bəzi (PartitionMagic) "
-"proqramlar\n"
-"vasitəsi ilə dəyişdirə bilərsiniz.\n"
-"\n"
-"   Bu seçənəyi seçmədən əvvəl nəzərə alın ki bu əməliyyatdan sonra Microsoft "
-"Windows\n"
-"bölməniz əvvəlkindən daha kiçik olacaq.\n"
-"\n"
-" * \"%s\": əgər sisteminizdəki bütün mövcud bölmələri silmək və yerinə\n"
-"Mandriva Linux sistemini qurmaq istəyirsinizsə bu seçənəyi seçin.\n"
-"Diqqətli olun, ona görə ki seçiminizi təsdiqlədikdən sonra geri ala "
-"bilməyəcəksiniz.\n"
-"\n"
-"   !! Əgər bu seçənəyi seçsəniz, diskinizdəki bütün mə'lumat "
-"silinəcəkdir. !!\n"
-"\n"
-" * \"%s\": bu sabit disk üstündəki hər şeyi siləcək və sıfırdan təzə bir "
-"bölmələmə,\n"
-"həyata keçirəcəkdir. Diskinizdəki bütün mə'lumat silinəcəkdir.\n"
-"\n"
-"   !! Əgər bu seçənəyi seçsəniz, diskinizdəki bütün mə'lumat "
-"silinəcəkdir. !!\n"
-"\n"
-" * \"%s\": diskinizi əllə bölmələmək istəyirsinizsə bu seçənəyi seçin. \n"
-"Diqqətli olun -- bu çox qüvvətli ancaq təhlükəli seçimdir. Ona görə də bu \n"
-"seçimi ancaq daha əvvəl buna oxşar bir şey etmişsinizsə və bu sahədə\n"
-"bilikləriniz mövcuddursa seçin. Yaxşısı budur ki bu əməliyyat sırasında\n"
-"yanınızda daha əvvəl bunu etmiş dostunuz da olsun. DiskDrake vasitəsinin\n"
-"istifadəsi haqqında mə'lumatı ``Starter Guide'' kitabçasının ``Managing \n"
-"Your Partitions '' qismində tapa bilərsiniz."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Boş sahəni istifadə et"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Mövcud bölməni işlət"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Windows bölməsindəki boş sahəni işlət"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Bütün diski sil"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Windows'u Sil"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Xüsusi disk bölmələndirməsi"
-
-#: help.pm:377
-#, fuzzy, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"Təbrik edirik! Qurulum başa çattı və GNU/Linuks sisteminiz indi\n"
-"istifadəyə hazırdır. Sadəcə olaraq sisteminizi yenidən başlatmaq üçün\n"
-"\"%s\" düyməsinə basın. Kompüteriniz başlarkən avadanlıq yoxlamasından\n"
-"sonra görəcəyiniz açılış yükləyici menyusunda sizə başlatmaq\n"
-"istədiyiniz əməliyyat sistemlərinin siyahısı göstəriləcək.\n"
-"\n"
-"\"%s\" düyməsi seçimə bağlı olaraq aşağıdakı iki seçimi göstərir:\n"
-"\n"
-" * \"%s\": indi etdiyiniz quruluma bənzər və operatora (kompüterin\n"
-"yanında oturana) ehtiyaca qalmadan qurulumu etmək üçün avtomatik\n"
-"qurulum disketi yaratma imkanı verir.\n"
-"\n"
-"   Düyməni basdıqdan sonra iki fərqli seçim görəcəksiniz:\n"
-"\n"
-"    * \"%s\". Qismən avtomatikləşdirilmiş qurulum. Yalnız disk bölmələmə\n"
-"addımı interaktiv olacaq və sizin istəklərinizə qulaq asacaq.\n"
-"\n"
-"    * \"%s\". Tamamilə avtomatikləşdirilmiş qurulum: sabit disk tamamilə\n"
-"yenidən yazılacaq, bütün mə'lumat yox olacaq.\n"
-"\n"
-"   Bu xassə, əsasən birdən çox eyni sistemin qurulmasında çox əlverişlidir.\n"
-"Daha çox mə'lumat üçün saytımızın Auto install qisminə baxın.\n"
-"\n"
-" * \"%s\"(*): bu, qurulum sırasında seçilən paketlərin siyahısını disketə\n"
-"qeyd edər. Bu disketi başqa qurulum ilə işlətmək üçün, disketi daxil edin "
-"və\n"
-"quruluma başlayın. Promptda, [F1] düyməsinə basın və >>linux\n"
-"defcfg=\"floppy\" << yazın.\n"
-"\n"
-"(*) Bunun üçün FAT ilə şəkilləndirilmiş disketə ehtiyacınız olacaq. (GNU/"
-"Linuks\n"
-"altında bunu yaratmaq üçün \"mformat a:\" əmrini verin)"
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Avtomatik qurulum disketi hazırla"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Təkrarla"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Avtomatlaşdırılmış"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Paket seçkilərini qeyd et"
-
-#: help.pm:412
-#, fuzzy, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Yeni yaradılan bütün bölmələr şəkilləndirilməlidir\n"
-"(şəkilləndirmək, fayl sistemini yaratmaq deməkdir - format).\n"
-"\n"
-"Bu arada var olan hazır bölmələri də üstündəkiləri silmək üçün yenidən\n"
-"şəkilləndirmək istəyə bilərsiniz.\n"
-"Bunu istəyirsinizsə xahiş edirik, bu bölmələri də seçin.\n"
-"\n"
-"Ağlınızda tutun ki var olan bütün bölmələri şəkilləndirmək\n"
-"məcburi deyil. Əməliyyat sistəmini əmələ gətirən bölmələri\n"
-"(yəni \"/\", \"usr\" və ya \"var\"ı yenidən şəkilləndirmək üçün\n"
-"seçə bilərsiniz. Mə'lumatlar olan \"home\"u isə toxunmadan\n"
-"saxlaya bilərsiniz).\n"
-"\n"
-"Bölmələri seçərkən diqqətli olun. Şəkilləndirdiyiniz bölmələrdəki\n"
-"mə'lumatlar itiriləcək və geri gəlməyəcək.\n"
-"\n"
-"Bölmələri şəkilləndirməyə hazır olanda \"%s\" düyməsini basın.\n"
-"\n"
-"Yeni Mandriva Linux sisteminizi qurmaq üçün başqa bölmə seçmək\n"
-"istəyirsinizsə \"%s\" düyməsinə basın.\n"
-"\n"
-"Üstündəki xəsərli blokların yoxlanmasını istədiyiniz bölmələri seçmək\n"
-"üçün \"%s\" düyməsinə basın."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Əvvəlki"
-
-#: help.pm:434
-#, fuzzy, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"Mandriva Linuxu qurduğunuz vaxtda çox güman ki bə'zi paketlər \n"
-"ilk çıxışlarından sonra yenilənmiş ola bilər. Bunlarla bir çox xəta "
-"düzəldilmiş\n"
-"ya da təhlükəsizlik qüvvətləndirilmiş ola bilər. Bu yeniləmələrdən istifadə\n"
-"etmək üçün indi siz İnternetdən endirmə əməliyyatına başlaya bilərsiniz.\n"
-"Əgər fəal internet bağlantınız varsa \"%s\", yoxsa, yenilənmiş paketləri\n"
-"daha sonra qurmaq üçün \"%s\" düyməsinə basın.\n"
-"\n"
-"\"%s\" seçilərsə, yeniləmələrin endirilə biləcəyi yerlərin siyahı "
-"göstəriləcək.\n"
-"Sizə ən yaxın olanı seçməlisiniz. Paket seçim ağacı göstəriləcək, bu bölümü\n"
-"gözdən keçirin və paketləri endirib qurmaq üçün \"%s\" düyməsinə basın.\n"
-"Ləğv etmək üçün isə \"%s\" düyməsindən istifadə edə bilərsiniz."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Qur"
-
-#: help.pm:447
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"Bu nöqtədə, DrakX sizə sisteminiz üçün təhlükəsizlik səvissəyini seçmə\n"
-"imkanını təqdim edəcək. Qayda olaraq, əgər kompüter vacib mə'lumat daxil\n"
-"edir ya da internetə birbaşa açıq sistem olacaqsa təhlükəsizlik səviyyəsi\n"
-"yüksək seçilməlidir. Bunun gətirdiyi əlverişsiz şərait isə sistemin "
-"istifadəsinin\n"
-"daha çətin olmasıdır.\n"
-"\n"
-"Əgər nə seçəcəyinizi bilmirsinizsə, seçili qurğuları olduğu kimi saxlayın."
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Təhlükəsizlik İdarəçisi"
-
-#: help.pm:461
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu nöqtədə siz Mandriva Linux yüklənəcək bölmə(lər)i seçməlisiniz. Əgər\n"
-"bölmələr əvvəldən mövcuddursa (sistemdə əvvəllər qurulu olan GNU/Linuks \n"
-"bölmələri və ya başqa bölmələndirmə vasitələri ilə hazırladığınız "
-"bölmələr),\n"
-"onları istifadə edə bilərsiniz, əks halda onları müəyyən etməlisiniz.\n"
-"\n"
-"Bölmələri yaratmaq üçün əvvəlcə diski seçməlisiniz. Diski seçmək üçün \n"
-"birinci İDE sürücüsü üçün ``hda''nı, ikincisi üçün ``hdb''ni, birinci SCSİ \n"
-"sürücüsü üçün isə ``sda'' v.s. üstünə tıqlamalısınız.\n"
-"\n"
-"Seçdiyiniz sürücünü bölmələndirmək üçün aşağıdakı seçimləri etməyə "
-"qadirsiniz:\n"
-"\n"
-" * \"%s\": Bu seçim seçili sabit disk üstündəki bütün bölmələri silər\n"
-"\n"
-" * \"%s\": Bu seçim sizə avtomatik olaraq sabit diskinizin boş sahəsində\n"
-"ext3 və dəyiş-toqquş sahəsi yaratma imkanı verəcək\n"
-"\n"
-"\"%s\": Əlavə xüsusiyyətlərə yetişmə imkanı verir\n"
-"\n"
-" * \"%s\": Bölmə cədvəlini disketə qeyd edər. Bu disket daha sonra əmələ "
-"gələ\n"
-"biləcək disk bölmə cədvəli xətalarını bərpa etmək üçün işlədilir. Bu addımı "
-"həyata keçirməyi\n"
-"sizə şiddətlə məsləhət edirik.\n"
-"\n"
-" * \"%s\": Daha əvvəl disketə qeyd edilən bölmə cədvəlini bərpa etmək "
-"(yenidən\n"
-"yükləmək) üçün bu seçimi işlədin.\n"
-"\n"
-" * \"%s\": Əgər bölmə cədvəliniz pozulubsa, onu bu seçimlə düzəldə\n"
-"bilərsiniz. Diqqətli olun və unutmayın ki bu həmişə işləməyə bilər.\n"
-"\n"
-" * \"%s\": Bütün dəyişiklikləri silərək sabit diskin əvvəlki bölmə "
-"cədvəlini\n"
-"geri yükləyəcək.\n"
-"\n"
-" * \"%s\": Bu seçimin işarəsini silərsəniz, istifadəçilər CD-ROM'lar və "
-"disketlər\n"
-"kimi çıxardıla bilən mediyaları əl ilə bağlamaq (mount) məcburiyyətində "
-"qalacaq.\n"
-"\n"
-" * \"%s\": Əgər diskinizi bölmələmək üçün bir sehirbaza ehtiyac hiss "
-"edirsinizsə,\n"
-"bu seçimi seçin. Bu yol, bölmələmədən yaxşı başı çıxmayanlar üçündür.\n"
-"\n"
-" * \"%s\": Dəyişikliklərinizi rədd etmək üçün bu seçimi işlədin.\n"
-"\n"
-" * \"%s\": Sabit disk haqqında ətraflı mə'lumat verir və onun üstündə əlavə\n"
-"əməliyyatlar (növ, seçimlər, şəkilləndirmə) icra etmə icazəsi verir.\n"
-"\n"
-" * \"%s\": Sabit diskinizi bölmələyib bitirdiyiniz vaxt bu seçim "
-"dəyişiklikləri\n"
-"sabit diskinizə qeyd edəcək.\n"
-"\n"
-"Bölmənin böyüklüyünü müəyyən edərkən klaviaturadakı istiqamət düymələri\n"
-"ilə seçiminizi sazlaya bilərsiniz.\n"
-"\n"
-"Qeyd: bütün seçimlərə klaviatura ilə yetişə bilərsiniz. Bölmələr arasında "
-"[Tab]\n"
-"və [Yuxarı/Aşağı] düymələri ilə hərəkət edə bilərsiniz.\n"
-"\n"
-"Bir bölmə seçili ikən bu qısa yolları istifadə edə bilərsiniz:\n"
-"\n"
-" * Ctrl-c -> yeni bölmə yaratmaq üçün (əgər boş bölmə seçilidirsə)\n"
-"\n"
-" * Ctrl-d -> bölməni silmək üçün\n"
-"\n"
-" * Ctrl-m -> bağlama nöqtəsi seçmək üçün\n"
-"\n"
-"Fərqli fayl sistem növləri haqqında daha ətraflı mə'lumat üçün, xahiş "
-"edirik,\n"
-"``Reference Manual'' kitabının ext2FS bölümünü oxuyun.\n"
-"\n"
-"Əgər PPC kompüterdə qurulum aparırsınızsa, ən az 1 MBlıq balaca bir HFS \n"
-"``bootstrap'' bölməsini yaboot açılış yükləyicisi üçün seçmək "
-"istəyəcəksiniz.\n"
-"Əgər daha çox yeriniz varsa, məsələn 50 MB, onda bütün kernel və ramdisk \n"
-"açılış əkslərinizi təcili hallar üçün burada saxlaya bilərsiniz."
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Normal modla mütəxəssis modu arasında keç"
-
-#: help.pm:533
-#, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sürücünüzdə bir və ya daha çox Microsoft bölməsi tapıldı.\n"
-"Xahiş edirik, Mandriva Linuxi qurmaq üçün onlardan hansını\n"
-"yenidən ölçüləndirmək istədiyinizi seçin.\n"
-"\n"
-"Hər bölmə bu cür sıralanıb; \"Linuks adı\",\"Windows adı\"\n"
-"\"Həcm\".\n"
-"\n"
-"\"Linuks adı\" bu cür qurulub: \"sabit disk növü\", \"sabit disk nömrəsi\",\n"
-"\"bölmə nömrəsi\" (məsələn, \"hda1\").\n"
-"\n"
-"\"Sabit disk növü\" diskiniz İDE sürücüsü isə \"hd\"dir, SCSİ sürücüsü isə\n"
-"\"sd\"dir.\n"
-"\n"
-"\"Sabit disk nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir. İDE \n"
-"sürücülər üçün:\n"
-"\n"
-"* \"a\" mə'nası \"birinci İDE idarəçisində ali (master) sürücü\",\n"
-"\n"
-"* \"b\" mə'nası \"birinci İDE idarəçisində qul (slave) sürücü\",\n"
-"\n"
-"* \"c\" mə'nası \"ikinci İDE idarəçisində ali (master) sürücü\",\n"
-"\n"
-"* \"d\" mə'nası \"ikinci İDE idarəçisində qul (slave) sürücü\".\n"
-"\n"
-"\n"
-"SCSİ sürücülərində, \"a\"nın mə'nası \"ən düşük SCSİ ID\",\n"
-"\"b\"nin mə'nası \"ikinci ən düşük SCSİ ID\"dir, vs...\n"
-"\n"
-"\"Windows adı\" sabit diskinizin Windows altındakı adıdır (birinci\n"
-"disk ya da bölmənin adı \"C:\"dir, vs...)."
-
-#: help.pm:564
-#, fuzzy, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"%s\": hazırkı ölkə seçimini yoxlayın. Əgər bu ölkədə deyilsəniz \"%s\"\n"
-"düyməsinə basaraq başqasını seçin. Əgər ölkəniz göstərilən ilk siyahıda\n"
-"deyilsə, tam ölkə siyahısını görmək üçün \"%s\" düyməsinə basın."
-
-#: help.pm:569
-#, fuzzy, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"Bu addım, yalnız sisteminizdə daha əvvəldən qurulu olan GNU/Linuks bölməsi\n"
-"tapılanda fəal olur.\n"
-"\n"
-"DrakX indi mövcud Mandriva Linux sisteminizi yeniləmək mi, yoxsa yenidən\n"
-"qurmaq mı istədiyinizi bilməlidir.\n"
-"\n"
-" * \"%s\": Bu seçim köhnə sistemi tamamilə siləcək. Əgər sabit "
-"disklərinizin\n"
-"bölmələndirilməsini dəyişdirmək ya da fayl sistemini dəyişdirmək "
-"istəyirsinizsə\n"
-"bu seçimi seçin. Yalnız, bölmələndirmə sxeminizdən aslı olaraq bə'zi mövcud\n"
-"mə'lumatlarınızın üstündən yazılmasının qabağını ala bilərsiniz.\n"
-"\n"
-" * \"%s\": Hazırkı Mandriva Linux sisteminizdə qurulu olan paketləri "
-"yeniləmə\n"
-"imkanı verir. Qurulum hazırkı bölmələmə sxemi və istifadəçi mə'lumat və "
-"sənədlərinə\n"
-"dəyməyəcək və dəyişdirməyəcək. Digər qurulum addımlarının çoxu isə standart\n"
-"qurulumdakının eynisi olacaq. Bu seçimi \"8.1\" versiyasından əvvəlki "
-"Mandriva Linuxlarda\n"
-"tədbiq etmək uyğun görülmür."
-
-#: help.pm:591
-#, fuzzy, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Bölümdə seçdiyiniz dilə bağlı olaraq, DrakX uyğun gələn klaviatura növü\n"
-"quraşdırmasını seçəcək. Yalnız, dilinizə tam uyğun olmayan klaviatura "
-"yiyəsi\n"
-"də ola bilərsiniz: misal üçün Azərbaycanda yaşayan Rus dilli şəxs isəniz\n"
-"klaviaturanızı Rus dilində istifadə etmək istəyəcəksiniz, ya da Rusiyada "
-"yaşayan\n"
-"Azərbaycanlı isəniz klaviaturanızı Rus dilində yox Azərbaycan dilində "
-"istifadə\n"
-"etmək istəyə bilərsiniz. İki vəziyyətdə də istədiyiniz klaviaturlarını "
-"siyahıdan seçə\n"
-"bilərsiniz.\n"
-"\n"
-"Dəstəklənən klaviaturaların tam siyahısını görmək üçün \"%s\" \n"
-"düyməsinə basın\n"
-"\n"
-"Əgər Latın əlifbası əsasında olmayan klaviatura düzülüşü seçsəniz, növbəti\n"
-"dialoq sizə Latın və Latın olmayan düzülüşlər arasında keçiş üçün\n"
-"qısa yol seçmə imkanı verəcək."
-
-#: help.pm:609
-#, fuzzy, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"Seçdiyiniz dil, sənədlər , qurulum və ümumi sistemə tə'sir edəcəkdir.\n"
-"İlk olaraq qaldığınız yerin coğrafi bölgəsini seçin, daha sonra\n"
-"istifadə etdiyiniz dili seçin.\n"
-"\"%s\" düyməsi əlavə dilləri seçmə imkanı verəcəkdir. Bu imkan\n"
-"fərqli bir dili də eyni zamanda istifadə etmə imkanı verəcək. Bu qurğunu\n"
-"\"%s\" ətraflı menyusundan həyata keçirə bilərsiniz.\n"
-"Qeyd: Əlavə dil seçməkdə bir dil ilə məhdud deyilsiniz. \"%s\" "
-"qutusundanistədiyiniz qədər dil seçə bilərsiniz. \n"
-"Bir dil seçimi bərabərində tərcümələr, yazı növləri və\n"
-"imla yoxlayıcıları kimi bə'zi üstünlükləri gətirəcəkdir.\n"
-"Ayrıca \"%s\" qutusundan sistemi UTF-8 (yunikod) kodlamasını işlətmək\n"
-"üçün zorlaya bilərsiniz.\n"
-"Qurduğunuz dillər arasında keçiş etmək üçün ali istifadəçi səlahiyyətləri\n"
-"ilə konsolda \"/usr/sbin/localedrake\" əmrini verə bilər ya da menyunuzdan\n"
-" \"localedrake\"'i seçərək dəyişdirə bilərsiniz. Bu, bütün sisteminya da\n"
-"yalnız bir istifadəçinin bütün dil qurğularını dəyişdirmə imkanı verir.\n"
-"Əgər bunları sıravi istifadəçi olaraq həyata keçirsəniz yalnız öz xüsusi\n"
-"dil qurğularınızı dəyişdirəcəksiniz."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "İspanca"
-
-#: help.pm:650
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"Adətən DrakX siçanınızdakı düymə ədədini tapmaqda əziyyət çəkməyəcək. Əgər\n"
-"müvəffəqiyyətsiz olsa, siçanınızı iki düyməli qəbul edəcək və üçüncü düymə \n"
-"emulyasiyasını fəallaşdıracaq. İki düyməli siçanda üçüncü düyməyə "
-"``basmaq''\n"
-"üçün sağ və sol düyməyə bərabər basmalısınız. DrakX, siçanınızın PS/2 ya da "
-"USB bağlantısından hansını işlətdiyini özü tapacaq.\n"
-"\n"
-"Əgər fərqli bir siçan növü seçmək istəsəniz verilən siyahıdan seçməniz\n"
-"kifayətdir.\n"
-"\n"
-"Əgər əsas siçan xaricində başqa bir siçan seçmək istəsəniz bir sınaq ekranı\n"
-"göstəriləcək.  Sİçanın qurğularının düz olduğundn əmin olmaq üçün\n"
-"düymələri və çarxı sınayın. Əgər siçan düzgün işləmirsə boşluq ya da\n"
-"[Return] düyməsinə basıb seçim siyahısına geri dönə bilərsiniz.\n"
-"\n"
-"Çərxli siçanlar adətən avtomatik aşkar edilə bilmir, bu səbəblə\n"
-"siçanınızı siyahıdan seçməniz lazım ola bilər. Siçanızın taxılı olduğu "
-"qapını\n"
-"və siçanınızı seçəndən sonra  \"%s\" düyməsinə basın, ekranda bir siçan\n"
-"rəsmi göstəriləcək. Çərxin düzgün işlədiyini yoxlamaq üçün onu döndərin.\n"
-"Ekrandakı siçan çərxinin döndüyünü görəndən sonra siçanın düymələrini \n"
-"oxun ekrandakı hərəkətini yoxlayın."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "Çərx emulyasiyalı"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Universal | Hər hansı bir PS/2 və USB siçan"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Xahiş edirik, doğru qapını seçin. Məsələn, Windows'dakı COM1\n"
-"GNU/Linuks'da ttyS0'dır."
-
-#: help.pm:688
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Bu, GNU/Linuks sisteminizin təhlükəsizliyi üçün ən əsas mərhələdir.\n"
-"\"Ali istifadəçi (root)\" şifərsini daxil edəcəksiniz. \"Ali istifadəçi\" "
-"sistemin\n"
-"idarəçisidir və yalnız o yeniləmələri, istifadəçiləri əlavə edib/silməyi\n"
-"sistemin bütün qurğularını dəyişdirə bilər. Qısaca, \"ali istifadəçi\" hər\n"
-"şeyi edə bilər! Buna görə də tapılması çətin olan bir şifrə seçməlisiniz.\n"
-"DrakX seçdiyiniz şifrənin asan olub olmadığını sizə bildirəcək. Görüdüyünüz\n"
-"kimi, şifrə müəyyən etməkdə məcbur deyilsiniz, yalnız bunu sizə şiddətlə\n"
-"məsləhət etmirik. GNU/Linuks da diqər əməliyyat sistemləri kimi "
-"istifadəçinin\n"
-"xətasından çox tə'sir ala bilər. \"Ali istifadəçi\" bütün həddləri keçərək\n"
-"bütün bölmələrdəki bütün mə'lumatları silə bilər. Ona görə də ali "
-"istifadəçi\n"
-"olma imkanını olduqca çətinləşdirməlisiniz.\n"
-"\n"
-"Şifrəniz ədəd və hərflərin qarışığı olmalıdır və 8 hərfdən qısa "
-"olmamalıdır.\n"
-"Şifrəni heçvaxt başqa bir yerə qeyd etməyin.\n"
-"\n"
-"Yalnız şifrəni çox uzun ya da çətin də seçməyin ona görə ki onu əzbərləmək\n"
-"məcburiyyətindəsiniz!\n"
-"\n"
-"Şifrənizi yazarkən ekranda göstərilməyəcək. Xəta riskini azaltmaq üçün\n"
-"şifrəni iki dəfə daxil edəcəksiniz. Burada diqqətli olun və eyni xətanı\n"
-"iki dəfə etməyin.\n"
-"\n"
-"Əgər bu kompüterə yetişmənin səlahiyyət vericisi tərəfindən idarə "
-"edilməsini\n"
-"istəyirsinizsə, \"%s\" düyməsinə basın.\n"
-"\n"
-"Əgər şəbəkəniz LDAP, NIS, ya da PDC Windows Domain authentication\n"
-"xidmətlərindən birisini işlədirsə, \"%s\" üçün uyğun gələnini seçin. Əgər\n"
-"hansını işlədəcəyinizi bilmirsinizsə, şəbəkə idarəçinizdən soruşun.\n"
-"\n"
-"Əgər şifrələri yadda saxlamaqda çətinlik çəkirsinizsə, internetə heç\n"
-"vaxt bağlanmayacaqsanızsa ya da kompüterini işlədən hamıya e'tibar\n"
-"edirsinizsə \"%s\" seçimini seçə bilərsiniz."
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "səlahiyyətləndirmə"
-
-#: help.pm:725
-#, fuzzy, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"LILO və grub ikisi də GNU/Linuks açılış yükləyiciləridir. Normalda bu "
-"mərhələ\n"
-"tamamilə avtomatikdir. DrakX diskin kök sektorunu yoxlayacaq və orada "
-"tapacağı\n"
-"mə'lumatlara görə açağıdakı addımları tətbiq edəcək:\n"
-"\n"
-" * əgər Windows açılış sektoru aşkar edilərsə, DrakX onu grub/LILO açılış "
-"sektoru\n"
-"ilə dəyişdirəcək. Beləliklə, siz həm GNU/Linuksu həm də digər əməliyyat "
-"sisteminizi\n"
-"(Windows ya da MacOS) aça biləcəksiniz.\n"
-"\n"
-" * əgər grub ya da LILO açılış sektoru aşkar edilərsə, o, yenisiylə əvəz "
-"ediləcək.\n"
-"\n"
-"Əgər müəyyən edib qərara gələ bilməzsə, DrakX açılış yükləyicisini hara "
-"yazmaq\n"
-"istədiyinizi sizə soruşacaq."
-
-#: help.pm:742
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"İndi kompüteriniz üçün çap sistemini seçmə vaxtı gəldi. Digər ƏS'ləri sizə "
-"bir\n"
-"dənəsini təqdim edə bilərlər, yalnız Mandriva Linux ikisini təqdim edir.\n"
-"Hər çap sistemi xüsusi quraşdırma növləri üçün uyğundur.\n"
-"\n"
-" * \"%s\" -- bu seçim``çap et, növbəyə alma'' mə'nasına gəlir.\n"
-"Əgər kompüterinizə bağlı olan çapçı varsa, çap yığılmalarından qurtulmaq\n"
-"istəyirsinizsə və şəbəkə çapçılarınız yoxdursa, bunu seçin. (\"%s\"\n"
-"yalnız çox sadə şəbəkə hallarını idarə edə bilər və şəbəkələrlə işlədiləndə\n"
-"biraz yavaş qalır. Əgər bu GNU/Linuks ilə ilk tanışmanızdırsa, sizə \"pdq\"\n"
-"işlətməyi məsləhət edirik.\n"
-"\n"
-" * \"%s\" - `` Ümumi Unix Çap Sistemi'', isə həm öz kompüterinizə\n"
-"bağlı olan həm də bu dünyadakı istənən yerə qurulan çapçıdan istifadə\n"
-"etmək üçün ideal vasitədir və quraşdırılması çox asandır.\n"
-"Əsas quraşdırma \"pdq\" qədər asandır. Əgər bir \"lpd\" vericisini\n"
-"emulyasiya etmək istəyirsinizsə, \"cups-lpd \" demonunu başlatdığınıza\n"
-"əmin oun. .\"%s\" eyni zamanda çapçının quraşdırılması və idarəsi və çap\n"
-"üçün qrafiki ara üzlərə də sahibdir. \n"
-"Əgər indi birisini seçib sonra çap sistemini bəyənməzsəniz, onu Mandriva "
-"Linux\n"
-"İdarə Mərkəzindəki PrinterDrake bölməsindəki mütəxəssis düyməsi vasitəsiylə\n"
-"dəyişdirə bilərsiniz."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Usta"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX əvvəlcə kompüterinizdə mövcud olan bütün İDE adapterleri \n"
-"axtarmağa cəhd edəcək. Eyni zamanda sisteminizdəki PCİ SCSİ kartları\n"
-"da axtarılacaq. Əgər SCSİ kart tapılsa sürücüsü avtomatik qurulacaq\n"
-"\n"
-"Bəzən DrakX sabit disklərinizi müvəffəqiyyətlə aşkar etməyə bilər.\n"
-"Bu vəziyyətdə avadanlığınızı əllə müəyyən etməli olacaqsınız.\n"
-"\n"
-"Əgər PCİ SCSİ adapterini əllə müəyyən etsəniz DrakX sizdən onun qurğularını\n"
-"sazlamak istədiyinizi soruşacaq, sizə sisteminizdə SCSİ\n"
-"adapteri olub olmadığı soruşulacaq. İmkan verin ki, DrakX sərbəstcə özü\n"
-"xüsusiyyətləri tapsın. Çox vaxt DrakX bu addımdan müvəffəqiyyətlə\n"
-"və xətasız çıxacaq.\n"
-"Əgər DrakX avadanlığa avtomatik olaraq hansı parametrlərin yollanacağını\n"
-"tapmaq üçün seçimləri qurğulaya bilməzsə sürücünü əllə siz quraşdırmaq\n"
-"məcburiyyətində qalacaqsınız."
-
-#: help.pm:786
-#, fuzzy, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\": əgər sisteminizdə səs kartı tapılıbsa burada göstəriləcək.\n"
-"Əgər burada göstərilən səs kartının sisteminizdəkindən fərqli olduğu\n"
-"nəzərinizə çatsa, düyməyə basıb başqa bir sürücü seçə bilərsiniz."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Səs kartı"
-
-#: help.pm:791
-#, fuzzy, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"İcmal olaraq, DrakX sisteminiz haqqında malik olduğu mə'lumatı göstərəcək.\n"
-"Qurulu avadanlığınıza bağlı olaraq, aşağıdakı girişlərin hamısını ya da bir "
-"neçəsi\n"
-"icmalda yer ala bilər. Hər giriş, quraşdırılan üzvdən və hazırkı qurğusunun "
-"qısa\n"
-"izahatından ibarətdir.\n"
-"Qurğunu dəyişdirmək üçün uyğun olan \"%s\" düyməsinə basın.\n"
-"\n"
-" * \"%s\": hazırkı klaviatura düzülüşünü göstərir. Lazımdırsa, bunu "
-"dəyişdirin.\n"
-"\n"
-" * \"%s\": hazırkı ölkə seçimini göstərir. Əgər bu ölkədə deyilsəniz,\"%s\"\n"
-"düyməsinə basaraq başqasını seçin. Ölkəniz siyahıda yer almırsa ölkələrin\n"
-"tam siyahısını görmək üçün \"%s\" düyməsinə basın.\n"
-"\n"
-" * \"%s\": əsasən, DrakX vaxt zolağınızı yaşadığınız ölkəyə görə müəyyən\n"
-"edir. Yalnız seçim düzgün deyilsə, \"%s\" düyməsinə basaraq onu dəyişdirə\n"
-"bilərsiniz.\n"
-"\n"
-" * \"%s\": hazırkı siçan qurğularını yoxlayın və lazımdırsa düyməyə basın.\n"
-"\n"
-" * \"%s\": \"%s\" düyməsinə basaraq çapçı quraşdırma sehirbazını işə sala\n"
-"bilərsiniz. Ətraflı mə'lumat üçün ''Başlanğıc Bələdçisi'' kitabçasının "
-"uyğun\n"
-"bölümünə baxın.\n"
-"\n"
-" * \"%s\": əgər sisteminizdə səs kartı tapılıbsa, burada göstəriləcək.\n"
-"Əgər buradakı səs kartının sisteminizdə olandan fərqli olduğu nəzərinizə\n"
-"çatarsa, düyməyə basaraq başqa sürücü seçə bilərsiniz.\n"
-"\n"
-" * \"%s\": əsasən, DrakX qrafiki ara üzünüzü \"800x600\" ya da \"1024x768\"\n"
-"həlledirliyində quraşdırır. Bu sizə uyğun deyilsə, \"%s\" düyməsinin köməyi "
-"ilə\n"
-"qrafiki ara üzünüzü yenidən quraşdıra bilərsiniz.\n"
-"\n"
-" * \"%s\": əgər sisteminizdə televiziya kartı tapılıbsa, burada "
-"göstəriləcək.\n"
-"Əgər televiziya kartınız var olub aşkar edilməyibsə, \"%s\" düyməsinə\n"
-"basaraq onu əllə quraşdırmağı sınayın.\n"
-"\n"
-" * \"%s\": əgər sisteminizdə ISDN kartı aşkar edilibsə, burada "
-"göstəriləcək.\n"
-"Kart ilə əlaqəli parametrləri dəyişdirmək üçün \"%s\" düyməsinə basa "
-"bilərsiniz.\n"
-"\n"
-" * \"%s\": əgər İnternet ya da şəbəkənizi indi quraşdırmaq istəyirsinizsə.\n"
-"\n"
-" * \"%s\": bu, əvvəlki addımda seçilən təhlükəsizlik səviyyəsini dəyişdirmə "
-"imkanı\n"
-"verir.\n"
-"\n"
-" * \"%s\": əgər İnternetə bağlanmağı fikirləşirsinizsə, sisteminizi qorumaq "
-"üçün\n"
-"atəş divarı quraşdırmaq yaxşı fikirdir. Ətraflı mə'lumat üçün ''Başlanğıc "
-"Bələdçisi''\n"
-"kitabçasının uyğun bölümünə baxın.\n"
-"\n"
-" * \"%s\": əgər açılış yükləyicisi qurğularınızı dəyişdirmək istəyirsinizsə, "
-"bu düyməyə\n"
-"basın. Bu, əsasən mütəxəssis istifadəçilər üçündür.\n"
-"\n"
-" * \"%s\": burada, sistemdə hansı xidmətlərin işləyəcəyini sazlaya "
-"bilərsiniz.\n"
-"Əgər sisteminizi verici olaraq işlətəcəksəniz, bu qurğuları gözdən keçirin."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Vaxt Zolağı"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "TV kartı"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "ISDN kartı"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Qrafiki Ara Üz"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Şəbəkə"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Vəkil vericiləri"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Təhlükəsizlik Səviyyəsi"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Atəş Divarı"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Açılış yükləyicisi"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Xidmətlər"
-
-#: help.pm:858
-#, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Yeni Mandriva Linux'izi qurmaq üçün silmək istədiyiniz sürücünü seçin.\n"
-"Diqqətli olun, sürücüdəki bütün mə'lumatlar silinəcək\n"
-"və geri gəlməyəcək!"
-
-#: help.pm:863
-#, fuzzy, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Sürücüdəki bütün mə'lumatları və bölmələri silmək üçün\n"
-"\"%s\" düyməsinə basın. Diqqətli olun,\"%s\" düyməsinə basdıqdan sonra\n"
-"Windows mə'lumatları də daxil olmaq üzərə bütün bölmə mə'lumatı geri\n"
-"dönməyəcək şəkildə silinəcək.\n"
-"\n"
-"Bölmədəki mə'lumatları qorumaq üçün və  əməliyyatı ləğv etmək üçün \"%s\" "
-"düyməsinə basın."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Sonrakı ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Əvvəlki"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Çəyirdəyinizə uyğun gələn çəyirdək modullarına yetişilə bilmədi (%s faylı "
-"əksikdir), bu çox vaxt açılış disketinizin Qurulum mediyası ilə sinxronluq "
-"içində olmadığı mə'nasına gəlir (xahiş edirik, yeni disket yaradın)."
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Eyni zamanda %s da şəkilləndirilməlidir"
-
-#: install_any.pm:406
-#, fuzzy, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Başqası var?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, fuzzy, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr "%s ara üzünüz var?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (http)"
-msgstr "Şəbəkə %s"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (ftp)"
-msgstr "Şəbəkə %s"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr ""
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Heç bir avadanlıq tapıla bilmədi"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr ""
-
-#: install_any.pm:489
-#, fuzzy, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Fork edilə bilmir: %s"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr ""
-
-#: install_any.pm:558
-#, fuzzy, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "%s, %s üstündə tapıla bilmir"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"CD-ROM'u dəyişdirin!\n"
-"Xahiş edirik, \"%s\" adlı CD-ROM'u sürücünüzə yerləşdirin və Oldu düyməsinə "
-"basın."
-
-#: install_any.pm:738
-#, fuzzy, c-format
-msgid "Copying in progress"
-msgstr "Təsbit etmə fəaliyyətdədir"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Siz aşağıdakı vericiləri seçdiniz: %s\n"
-"\n"
-"\n"
-"Bu vericilər əsas olaraq fəal olur. Onların bilinən heç bir təhlükəsizlik\n"
-"problemləri yoxdur, ancaq bə'zi yeni xətalar tapıla bilər. Belə olsa, "
-"mümükün olan ən yaxın zamanda onları yeniləməlisiniz.\n"
-"\n"
-"\n"
-"Bu vericiləri həqiqətən də qurmaq istəyirsiniz?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Sisteminizin yenilənməsi üçün bu paketlər silinəcək: %s\n"
-"\n"
-"\n"
-"Bu paketləri həqiqətən də silmək istəyirsiniz?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s faylı oxunurkan xəta oldu"
-
-#: install_any.pm:1559
-#, fuzzy, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Aşağıdakı paketlər qurulmalıdır:\n"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlü bir sürücü "
-"tapılmadı. Bu problemin qaynağı üçün avadanlığınızı yoxlayın"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr ""
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, fuzzy, c-format
-msgid "Please choose a media"
-msgstr "Xahiş edirik seçin"
-
-#: install_any.pm:1698
-#, fuzzy, c-format
-msgid "Bad media %s"
-msgstr "%s medyası əlavə edildi"
-
-#: install_any.pm:1710
-#, fuzzy, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Fayl onsuz da mövcuddur. Üstünə yazım?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Bölmələmədən əvvəl görüntü alına bilməz"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ekran görüntüləri qurulumdan sonra %s mövqeyində olacaqdır"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Sistem qurulumu"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Sistem quraşdırılması"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sisteminizdaki bə'zi avadanlıqlar işləməsi üçün düzgün sürücülərə ehtiyac "
-"duyar.\n"
-"Bunun haqqında %s də/a lazımi malumatları tapa bilərsiniz"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Bir kök bölməsi yaratmalısınız.\n"
-"Bunun üçün istər mövcud bir disk bölümü üzərinə tıqlayın, \n"
-"ya da yeni birini başdan yaradın. Sonra \"Bağlama \n"
-"Nöqtəsi\"gedişatını seçin va buranı '/' olaraq dəyişdirin."
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Dəyiş-toqquş sahəniz yoxdur\n"
-"Davam edilsin?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "/boot/efi ünvanına bağlanmış FAT bölməniz olmalıdır"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölmələr ayırmaq üçün kifayət qədər boş yer yoxdur"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Mövcud bölmələri işlət"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "İstifadə ediləcək mövcud bölmə yoxdur"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback üçün Windows bölməsini işlət"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linux4Win-i qurmaq üçün hansı disk bölməsini istifadə edəcəksiniz?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Böyüklükləri seçin"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Kök bölməsi böyüklüyü (Mb): "
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Dəyiş-toqquş sahəsi böyüklüyü (Mb): "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "Loopback üçün FAT bölməsi yoxdur (ya da lazımi yer yoxdur)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Hansı bölmə ölçüləndirilsin?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"FAT ölçüləndiricimiz sizin bölməniziri işlədə bilmir,\n"
-"bu xəta oldu: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Windows bölməsin böyüklüyü hesablanır"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Windows bölümünüz çox dağınıqdır. Daxiş edirik, əvvəlcə kompüterinizi "
-"Windows ilə açın, ''defrag'' vasitəsini işlədin, sonra Mandriva Linux "
-"qurulumunu yenidən başladın."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"XƏBƏRDARLIQ!\n"
-"\n"
-"DrakX indi Windows disk bölmənizin böyüklüyünü dəyişdirəcək.\n"
-"Diqqətli olun, bu təhlükəli ola bilər. Hələ də etmədinizsə qurulumdan\n"
-"çıxın və Windows altında scandisk (lazım gələrsə defrag da) proqramını\n"
-"icra edin. Eyni zamanda mə'lumatlarınızın da ehtiyat nüsxəsini alın.\n"
-"Ardından quruluma davam edin.\n"
-"Hazır olanda, Oldu düyməsinə basın."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Windows üçün hansı böyüklüyü saxlamaq istəyirsiniz"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "%s bölməsi"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Windows bölməsi ölçüləndirilir"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT ölçüləndirilməsi bacarılmadı: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Ölçüləndiriləcək FAT bölməsi mövcud deyil (ya da lazımi yer yoxdur)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Windows(TM)'u Sil"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sizin birdən çox diskiniz var, linux qurmaq üçün hansını istifadə "
-"edəcəksiniz?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s sürüsündəki mövcud bütün bölmələr və onlardakı mə'lumatitiriləcək"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Fdisk istifadə et"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"İndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
-"İşinizi bitirdiyinizdə `w' ilə qeyd etməyi unutmayın"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX bölmələndirmə sehirbazı bu çıxış yollarını tapdı:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölmələndirmə bacarılmadı: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Şəbəkə fəallaşdırılır"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Şəbəkə dayandırılır"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, fuzzy, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Giriş\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. Lisenziya Müqaviləsi\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Hüdudlu Zəmanət\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. GPL və Əlaqədar Lisenziyalar\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. İntelektual Sahiblik Hüquqları\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Hökümət Qanunları \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"Diqqət: Sərbəst Tə'minat daima patentsiz ola bilməz və daxil edilən bə'zi\n"
-"sərbəst tə'minat ölkənizdə patentlər tərəfindən qoruna bilər. Misal üçün,\n"
-"daxil edilən MP3 dekoderinin irəli istifadəsi üçün lisenziya lazım ola "
-"bilər.\n"
-"Əgər patentlərin sizə ait olub olmadığını bilmirsinizsə yerli qanunlarınızı\n"
-"gözdən keçirin."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a şəbəkə. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: install_messages.pm:131
-#, fuzzy, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Təbrik edirik, qurulum başa çatdı.\n"
-"Cdrom və disketi çıxartdıqtan sonra Enter'ə basaraq kompüterinizi\n"
-"yenidən başladın.\n"
-"\n"
-"\n"
-"Mandriva Linux'in bu buraxılışındakı yamaqlar haqqında \n"
-"mə'lumat almaq üçün bu ünvana baxın: \n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Sisteminizin qurğuları haqqında daha geniş mə'lumatı Rəsmi\n"
-"Mandriva Linux İstifadəçi Kitabcığının qurulum sonrası bölməsində\n"
-"tapa bilərsiniz."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s bağlama nöqtəsini ikiləşdir"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Bə'zi paketlər doğru olaraq qurulumu bitirmədi.\n"
-"Cdrom sürücünüz ya da cdromunuz düzgün işləmir.\n"
-"Əvvəldən Linuks qurulu bir sistemdə \"rpm -qpl media/main/*.rpm\"\n"
-"əmrini istifadə edərək Cd-Rom'u yoxlayın.\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Başlanğıc addımı `%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Paket Qruplarının Seçimi"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ümumi böyüklük: %d / %d Mb"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Xətalı paket"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Buraxılış: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Böyüklük: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Əhəmiyyət:"
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "%s əksik olduğuna görə"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "%s razı qalmadığına görə"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "%s irəliləndirməyə çalışılır"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "%s-i saxlamaq üçün"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr "Bu paketi seçə bilməzsiniz, çünki qurmaq üçün yer çatmır."
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Aşağıdakı paketlər qurulacaq"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Aşağıdakı paketlər sistemdən silinəcəklər"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Bu lazımlı bir paketdir, sistemdən çıxardıla bilməz"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Bu paketi sistemdən çıxarda bilməzsınız. Artıq qurulmuşdur."
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bu paket yenilənməlidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Bu paketi sistemdən çıxarda bilməzsiniz. Yenilənməlidir"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Avtomatik seçili paketləri göstər"
-
-#: install_steps_gtk.pm:389
-#, fuzzy, c-format
-msgid "Load/Save selection"
-msgstr "Seçili olanı qeyd et"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Paket seçkiləri yenilənir"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Minimal qurulum"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Qurmaq istədiyiniz paketləri seçin"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Qurulur"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Təxmini olaraq hesaplanır"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Təfsilatsız"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Qalan müddət"
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Xahiş edirik, gözləyin, qurulum hazırlanır"
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d paket"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "%s paketi qurulur"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Rədd Et"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, fuzzy, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"CD-ROM'u dəyişdirin!\n"
-"\n"
-"Xahiş edirik, \"%s\" adlı CD-ROM'u sürücünüzə yerləşdirin və Oldu düyməsinə "
-"basın.\n"
-"Əgər CD-ROM əlinizdə deyilsə, bu CD-Rom'dan qurmamaq üçün Ləğv Et düyməsinə "
-"basın."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Paketləri istərkən xəta yarandı:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Yenə də davam edək?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Paketlər qurulurkən bir xəta oldu:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "quraşdırılmayıb"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Lisenziya razılığı"
-
-#: install_steps_interactive.pm:89
-#, fuzzy, c-format
-msgid "Release Notes"
-msgstr "Buraxılış:"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Xahiş edirik, klaviatura düzülüşünüzü seçin."
-
-#: install_steps_interactive.pm:121
-#, fuzzy, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Bütün mövcud ölkələrinn siyahısı"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Qurulum/Yeniləmə"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Bu bir qurulum, yoxsa yeniləmədir?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "%s-i yenilə"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "%s üçün şifrələmə açarı"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Xahiş edirik, siçanınızın növünü seçin."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Siçan Qapısı"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Siçanınızın bağlı olduğu serial qapını seçin."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Düymə emulyasiyası"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Düymə 2 emulyasiyası"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "3 Düymə Emulyasiyası"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCİA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCİA kartlar qurulur..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "İDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "İDE qapıları qurulur"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "Uyğun bölmə mövcud deyil"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Bölmələr bağlama nöqtələri üçün yoxlanır"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Bağlama nöqtələrini seçin"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"1 MB bootstrap üçün yer yoxdur! Qurulum davam edəcək, ancaq sisteminizi aça "
-"bilmək üçün DiskDrake'də bootstrap bölməsi yaratmalısınız."
-
-#: install_steps_interactive.pm:317
-#, fuzzy, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"1 MB bootstrap üçün yer yoxdur! Qurulum davam edəcək, ancaq sisteminizi aça "
-"bilmək üçün DiskDrake'də bootstrap bölməsi yaratmalısınız."
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Şəkilləndirmək istədiyiniz bölmələrini seçin"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Xətalı bloklar sınansınmı?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"%s fayl sisteminin yoxlanması bacarılmadı. Xətaları düzəltmək istəyirsiniz? "
-"(diqqətli olun, mə'lumatları itirə bilərsiniz)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Qurulumu bitirmək üçün lazımi sahə yoxdur, xahiş edirik, əlavə edin"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"Mövcud paketlər axtarılır və rpm mə'lumat bazası yenidən inşa edilir..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Mövcud olan paketlər axtarılır."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Qurulu olan paketlər yoxlanır..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Güncəllənəcək paketlar tapılır"
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almaq üçün bir əks ünvanı seçin"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Sisteminizdə qurulum ya da yeniləmə üçün lazımi boş yer yoxdur(%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, fuzzy, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Xahiş edirik, paket seçkilərini disketə qeyd et/disketdən yüklə\n"
-"seçənəyini seçin."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Yüklə"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Qeyd Et"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "Səhv fayl"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Seçili böyüklük var olandan daha böyükdür"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Qurulum növü"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Heç bir paket qrupunu seçmədiniz.\n"
-"Xahiş edirik, istədiyiniz ən kiçik qurulumu seçin:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Əsas sənədlərlə birlikdə (məsləhət edilən!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Həqiqətən minimal qurulum (xüsusilə urpmi olmasın)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Hamısı"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Aşağıdakı siyahıdakı bütün CD'lərə sahib isəniz, OLDU'ya basın.\n"
-"CD'lərin heç birinə sahib deyilsəniz, İMTİNA ET'ə basın.\n"
-"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
-"basın."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" adlı Cd-Rom"
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Qurulum hazırlanır"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s paketi qurulur\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Qurulum sonrası qurğular"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"İndi siz yenilənmiş paketləri endirib qurma imkanına maliksiniz. Bu "
-"paketlər\n"
-"distribusiya buraxıldıqdan sonra yeniləniblər və təhlükəsizlik ya da xəya "
-"həllərini\n"
-"daxil edə bilərlər.\n"
-"\n"
-"Bu paketləri endirmək üçün fəal İnternet bağlantınız olmalıdır \n"
-"\n"
-"Yeniləmələri qurmaq istəyirsiniz ?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Əks ünvanına bağlantı qurulur"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "%s əksi ilə rabitə qurula bilmir"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Yenidən sınamaq istəyirsiniz?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Vaxt zolağınız hansıdır?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Avtomatik vaxt sinxronizasiyası (NTP vasitəsiylə)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP Verici"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "İcmal"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Sistem"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Avadanlıq"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Çapçı yoxdur"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Heç İSA səs kartınız var?"
-
-#: install_steps_interactive.pm:1028
-#, fuzzy, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Qurulumdan sonra səs kartınızı qurğulamaq üçün \"sndconfig\" əmrini icra edin"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Səs kartı tapılmadı. Qurulumdan sonra \"harddrake\"ni işə salın"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Qrafiki ara üz"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Şəbəkə və İnternet"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "quraşdırılıb"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Təhlükəsizlik"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "fəal"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "qeyri-fəal"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Açılış"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%2$s üstündə %1$s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Xidmətlər: %d fəal, %d qeydli"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Siz X-i quraşdırmadınız. Bundan əminsinizmi?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Açılış yükləyici hazırlanır"
-
-#: install_steps_interactive.pm:1230
-#, fuzzy, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Dünyadan kənar yerdən gələn ya da namə'lum\n"
-" sisteminiz var, yaboot açılış yükləyicisi sizin üçün işləməyəcək.\n"
-"Qurulum davam edəcək ancaq kompüterinizi aça bilmək üçün\n"
-" BootX ya da başqa vasitədən istifadə etməlisiniz"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "aboot istifadə etmək istəyirsiniz?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"aboot qurulumunda xata, \n"
-"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: install_steps_interactive.pm:1294
-#, fuzzy, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Xahiş edirik, işlədilən açılış disketini %s sürücüsünə yerləşdirin"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Avtomatik qurulum disketi hazırlanır"
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bə'zi bölmələr bitdi.\n"
-"\n"
-"Həqiqətən də çıxmaq istəyirsiniz?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Avtomatik qurulum disketi hazırla"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Avtomatik qurulum tamamilə avtomatikləşdirilə bilər,\n"
-"ancaq bu zaman o bütün sabit diskə əl qoyacaq!!!\n"
-"(bu başqa kompüterdə də sistemi qura bilmək üçündür).\n"
-"\n"
-"Gələcəkdə bu qurulumu təkrarlamaq istəyə bilərsiniz.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> irəli/geri  |  <Boşluq> işarətlə  |  <F12> sonrakı ekran"
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Fayl seç"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Əlavə et"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Təkmilləşdir"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Sil"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Əsas"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Qurtar"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Et"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Xətalı seçim, yenidən sınayın\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçiminiz? (əsası %s) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Doldurmaq məcburiyyətində olacağınız girişlər:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Seçkiniz? (0/1, əsas `%s') "
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Düymə `%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Bu düyməyə basmaq istəyirsiniz?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Seçiminiz? (əsas `%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr " enter `void' void giriçi üçün"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Arasından seçiləcək həddindən artıq çox şey var (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Xahiş edirik, 10-aralığının düzəltmək istədiyiniz ilk rəqəmini seçin,\n"
-"ya da davam etmək üçün Enter düyməsinə basın.\n"
-"Seçiminiz? "
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Diqqət edin, etiket dəyişdi:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Yenidən göndər"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Çex dili (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Almanca"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "İspanca"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Fin dili"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Fransızca"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norveç dili"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Polyak dili"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Rusca"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "İsveçcə"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "İngiliz (UK) klaviaturası"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "US klaviaturası"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albanca"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Ermenicə (köhnə)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Ermenicə (yazı makinası)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Ermenicə (fonetik)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Ərəb dili"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Azərbaycanca (latın)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belçika dili"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Benqal dili (İnscript sırası)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Benqal dili (Probhat sırası)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bolqar (fonetik)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bolqar (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brazilya dili (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosniya"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Belarus dili"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "İsveçcə (Alman sırası)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "İsveçrə dili (Fransız düzülüşü)"
-
-#: keyboard.pm:204
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Ərəb dili"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Çex dili (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Almanca (ölü düymələr olmasın)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanaqari"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Danimarka dili"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Esperanto)"
-
-#: keyboard.pm:215
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Norveç dili)"
-
-#: keyboard.pm:217
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Norveç dili)"
-
-#: keyboard.pm:220
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (İsveç)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (İsveç)"
-
-#: keyboard.pm:222
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Bosniya"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estoniya dili"
-
-#: keyboard.pm:227
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Yunanca"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Gürcü dili (\"Rus\" sırası)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Gürcü dili (\"Latın\" sırası)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Yunanca"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Yunanca (politonik)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Gujarati dili"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Qurmuxi"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Xorvat dili"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Macar dili"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "İrlandiya Dili"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Yəhudi dili"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Yəhudi dili (Fonetik)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Farsca"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "İslandiya dili"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "İtalyan dili"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Inuktitut"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Yapon dili 106 düyməli"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kanada"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Koreya klaviaturası"
-
-#: keyboard.pm:254
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Ərəb dili"
-
-#: keyboard.pm:255
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "İngiliz (UK) klaviaturası"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Latın Amerika dili"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laotian"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Litvaniya dili AZERTY (köhnə)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Litva dili AZERTY (yeni)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"number row\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Latış dili"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malayalam dili"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Makedoniya dili"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Myanmar dili  (Burmese)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongolca (kiril)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Malta (UK)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Malta (US)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Hollandiya dili"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Oriya"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Polyakca (QWERTY sırası)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Polyakca (QWERTZ sırası)"
-
-#: keyboard.pm:277
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Polyak dili"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portuqalca"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Fransız dili (Kanada/Quebec)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Rumın (qwertz)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Rumın (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Rus dili (Fonetik)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Saami (Norveç dili)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Saami (isveç/fin)"
-
-#: keyboard.pm:289
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Tay klaviaturası"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Slovencə"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slovakca (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slovakca (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Serbcə (kiril)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Siriak"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Siriak (fonetik)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telugu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamil (ISCII-ldüzülüşü)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamil dili (Yazı makinası düzülüşü)"
-
-#: keyboard.pm:304
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Tay klaviaturası"
-
-#: keyboard.pm:305
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Tay klaviaturası"
-
-#: keyboard.pm:307
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Tay klaviaturası"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Tacik klaviaturası"
-
-#: keyboard.pm:315
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Almanca"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Türkcə (ənənəvi \"F\" klaviatura)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Türk dili (müasir \"Q\" klaviatura)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ukrayna"
-
-#: keyboard.pm:322
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Oriya"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klaviaturası (beynəlmiləl)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Özbək dili (kiril)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Vyetnam dili \"numeric row\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Yugoslav (latın)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Sağ Alt düyməsi"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Eyni zamanda iki Shift düyməsi "
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Eyni zamanda Control və Shift düymələri"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock düyməsi"
-
-#: keyboard.pm:339
-#, fuzzy, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Eyni zamanda Ctrl və Alt düymələri"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Eyni zamanda Ctrl və Alt düymələri"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Eyni zamanda Alt və Shift düymələri"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menyu\" düyməsi"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Sol \"Windows\" düyməsi"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Sağ \"Windows\" düyməsi"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Eyni zamanda iki Control düyməsi "
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Eyni zamanda iki Alt düyməsi"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Sol Shift düyməsi"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Sağ Shift düyməsi"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Sol Alt düyməsi"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Sol Control düyməsi"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Sağ Control düyməsi"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Fərqli klaviatura düzülüşləri arasında keçişə icazə verən\n"
-"düymə ya da düymələr kombinasiyasını seçə bilərsiniz.\n"
-"(mis: latın və latın olmayan)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"Bu qurğu qurulumdan sonra fəal olacaq.\n"
-"Qurulum sırasında, fərqli klaviatura düzülüşləri arasında\n"
-"keçmək üçün Sağ Control düyməsini istifadə etməlisiniz."
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andorra"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Birləşmiş Ərəb Əmirlikləri"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Əfqanıstan"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antiq və Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Anquilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albaniya"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Ermənistan"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Holland Antilləri"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Anqola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antarktika"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Argentina"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Amerikan Samoa"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Azərbaycan"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosniya və Herzoqovina"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbados"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Banqladeş"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bolqarıstan"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Bahreyn"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benin"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Bruney Darüssəlam"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Boliviya"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahamalar"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Butan"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Buvet Adası"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Botsvana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Belarusiya"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Beliz"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos Adası"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Konqo (Kinşasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Mərkəzi Afrika Respublikası"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Kot Divuar"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Kuku Adaları"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Çili"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Çin"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbiya"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Serbiya və Qaradağ"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Kuba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Keyp Verde"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Kristmas Adası"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Kipr"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Cibuti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominik"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikan Respublikası"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Əlcəzair"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Misir"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Qərbi Saxara"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritre"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Efiopiya"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fici"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Fokland Adaları (Malvin)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Mikroneziya"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Faro Adaları"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Qabon"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Birləşmiş Krallıq"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Qrenada"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Gürcüstan"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Fransız Gvineyası"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Qana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Qrinland"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Qambiya"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Qvineya"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Quadelup"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatorial Qvineya"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Cənubi Georgiya və Cənubi Sandviç Adası"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Qvatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Quam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Qvineya Bissau"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Quyana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Çin (Honq Konq)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Hird Adası və Mkdonald Adaları"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Xırvatıstan"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haiti"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "İndoneziya"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Hindistan"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britaniya Hind Okeanı Sahəsi"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "İrak"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "İran"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "İslandiya"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Yamayka"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "İordaniya"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenya"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Qırğızıstan"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Kambodiya"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Komor"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Müqəddəs Kit və Nevis"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Koreya (Şimal)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Koreya"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kuveyt"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Kayman Adaları"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Qazaxstan"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Livan"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Lixtenşteyn"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Şri Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Liberiya"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Litva"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Lyuksemburq"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Latviya"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Liviya"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Mərakeş"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monako"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldova"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madaqaskar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Marşal Adaları"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Makedoniya"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Monqolustan"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Şimali Marian Adaları"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martiniq"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Mavritaniya"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malta"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Maurit"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Maldiv"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malavi"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malayziya"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mozambiq"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibiya"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Yeni Kaledoniya"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Niger"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Adaları"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nigeriya"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nikaraqua"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepal"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauru"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niu"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Oman"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panama"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Peru"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Fransız Poloneziyası"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Yeni Qvineya"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Filippin"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Müqəddəs Pyer və Migelion"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitkairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Porto Riko"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Filistin"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paraqvay"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palau"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Katar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Reyunion"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Ruminıya"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Səudiyyə Ərəbistan"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Adaları"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Seyşel"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sudan"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Sinqapur"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Müqəddəs Helena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Sloveniya"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard və Jan Mayen Adaları"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Siera Lione"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Seneqal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somali"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Surinam"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome və Prinsip"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Siriya"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Svaziland"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Türk və Kaykos Adaları"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Çad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "Cənubi Fransız Sahələri"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Toqo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tacikistan"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelo"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Şərqi Timor"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Türkmənistan"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunis"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tonqa"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Türkiyə"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad və Tobaqo"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzaniya"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ukrayna"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Uqanda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Birləşmiş Ştatlar yanı Kiçik Adalar"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Uruqvay"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Özbəkistan"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Müqəddəs Vinsent və Qrenadin"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venesuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virgin Adaları (Britaniya)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virgin Adaları (ABŞ)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Vyetnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Vallis və Futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoa"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Yəmən"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayot"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zambiya"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabve"
-
-#: lang.pm:1073
-#, fuzzy, c-format
-msgid "You should install the following packages: %s"
-msgstr "Xorg paketi qurula bilmir: %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s Sisteminə Xoş Gəldiniz"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Dairəvi bağlama %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Əvvəlcə məntiqi həcmləri sil\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Parametrlər"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "YOXDUR"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Modul quraşdırması"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Burada, modulun hər bir parametrini quraşdıra bilərsiniz."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "%s ara üz tapıldı"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Başqası var?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "%s ara üzünüz var?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Avadanlıq mə'lumatına bax"
-
-#: modules/interactive.pm:82
-#, fuzzy, c-format
-msgid "Installing driver for USB controller"
-msgstr "%s kartı üçün sürücü %s qurulur"
-
-#: modules/interactive.pm:83
-#, fuzzy, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "%s kartı üçün sürücü %s qurulur"
-
-#: modules/interactive.pm:84
-#, fuzzy, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "%s kartı üçün sürücü %s qurulur"
-
-#: modules/interactive.pm:85
-#, fuzzy, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "%s kartı üçün sürücü %s qurulur"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s kartı üçün sürücü %s qurulur"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Siz indi %s moduluna seçimlə ötürə bilərsiniz.\n"
-"Qeyd edin ki bütün ünvanlar 0x şəkilçisi ilə daxil edilməlidir, mis: '0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"İstəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
-"Parametrlər``ad=qiymət ad2=qiymət2...'' şəklində olmalıdır.\n"
-"Məsələn ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Modul seçimləri:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hansı %s sürücüsü sınansın?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Bəzi hallarda, %s sürücü düzgün işləməsi üçün əlavə mə'lumat istəyə bilər.\n"
-"Sürücüler üçün əlavə bir xüsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
-"sürücülərin lazımi mə'lumatlar üçün avadalığı tanımasını mı istəyərsiniz? \n"
-"Bə'zən tanımlama kompüterinizi dondura bilər amma donduğu üçün\n"
-"kompüterinizə heç bir şey olmaz."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Avtomatik yoxla"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Seçimləri müəyyən et"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s modulunun yüklənməsi iflas etdi.\n"
-"Yenidən başqa bir parametr ilə sınamaq istəyirsiniz?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "ədəd"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d vergüllə ayrılmış ədəd"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d vergüllə ayrılmış qatar"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "verqüllə ayrılmış ədədlər"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "verqüllə ayrılmış qatarlar"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Siçan"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Standart"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sıravi PS2 Çərxli Siçan"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Avtomatik"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Siçanı"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 düymə"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Sıravi 2 Düyməli Siçan"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Çərx emulyasiyalı sıravi 3 düyməli siçan"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Çərx"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "serial"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Sıravi 3 Düyməli Siçan"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Çərx emulyasiyalı Logitech MouseMan"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Siçan Sistemləri"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Çərx emulyasiyalı Logitech CC Seriyaları"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serial ya da köhnə C7 növü)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Çərx emulyasiyalı Logitech siçan (serial, köhnə C7 növü)"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Çərx emulyasiyalı Kensington Thinking siçanı"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "busmouse"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 düyməli"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 düyməli"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "Çərx emulyasiyalı 3 düymə"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Universal"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Hər hansı bir PS/2 və USB siçan"
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "heç biri"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Siçansız"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr ""
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Xahiş edirik, siçanınızı seçin"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Siçanınızı işə salmaq üçün,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "SİÇANIN ÇƏRXİNİ OYNADIN!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "pppoe istifadə et"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "PPTPe istifadə et"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "dhcp istifadə et"
-
-#: network/adsl.pm:22
-#, fuzzy, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel speedtouch USB modem"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - tapıldı"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (PPPoA işlədən) USB"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (DHCP işlədən) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "İnternetə bağlan"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"ADSL ilə internetə bağlanmanın ən yaxşı yolu PPPoE'dur.\n"
-"Bəzi bağlantılar pptp istifadə edir, çox azı isə dhcp işlədir.\n"
-"Bilmirsiniz isə 'pppop istifadə et'-i seçin"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "ADSL bağlantısı növü: "
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Veb Vericisi"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Domen Adı Vericisi"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "SSH vericisisi"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "FTP vericisi"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Poçt Vericisi"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP və IMAP Vericisi"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Telnet vericisi"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "CUPS vericisi"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Echo istəyi (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr ""
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"drakfirewall quraşdırıcısı\n"
-"\n"
-"Bu, Mandriva Linux sisteminiz üçün şəxsi bir atəş divarını quraşdıracaq.\n"
-"Daha güclü və e'tibarlı sistem üçün xahiş edirik, xüsusi Mandriva Security\n"
-"Firewall buraxılışı ilə maraqlanın."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall quraşdırıcısı\n"
-"\n"
-"Daha irəli getmədən Şəbəkə/İnternet bağlantınızı drakconnect\n"
-"vasitəsi ilə quraşdırdığınızdan əmin olun."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "İnternetin hansı xidmətlərə bağlana bilməsini istəyirsiniz?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Müxtəlif qapılar daxil edə bilərsiniz. \n"
-"Hökmlü nümunələr: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Mə'lumat üçün /etc/services'a baxın."
-
-#: network/drakfirewall.pm:188
-#, fuzzy, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Hökmsüz qapı daxil edildi: %s.\n"
-"Düzgün şəkil \"port/tcp\" ya da \"port/udp\"dır, \n"
-"burada qapı 1 və 65535 arası ədəddir."
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Hamısına (atəş divarı olmasın)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Diqər qapılar"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "İSA / PCMCİA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Bilmirəm"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCİ"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Bələdçi"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, fuzzy, c-format
-msgid "Manual choice"
-msgstr "əllə"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Daxili ISDN kart"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Əllə quraşdırma"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Avtomatik IP (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "Avtomatik IP (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Dünyanın geri qalanı üçün protokol"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Avropa protokolu (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Dünyanın geri qalanı üçün protokol \n"
-" D-Channel yoxdur (kiralıq xətlər)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel speedtouch USB modem"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Sagem USB modem"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Bewan modem"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "ECI Hi-Focus modem"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Dinamik Qovşaq Quraşdırma Protokolu (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Əllə TCP/IP quraşdırması"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "Nöqtədən Nöqtəyə Tunelləmə Protokolu (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "Eternet üstündən PPP (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "ATM üstündən PPP (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Bridged Ethernet LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Bridged Ethernet VC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "Routed IP LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "Routed IP VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Skript əsaslı"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-əsaslı"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Şəbəkə və İnternet Qurğuları"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(%s qapısında tapıldı)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(%s tapıldı)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(tapıldı)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "LAN bağlantısı"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Kabelsiz bağlantı"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL bağlantısı"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Kabel bağlantısı"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN Bağlantısı"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Modem bağlantısı"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Qurğulamaq istədiyiniz bağlantını seçin"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"İndi %s bağlantısı qurğulanacaq.\n"
-"\n"
-"\n"
-"Davam etmək üçün \"%s\" düyməsinə basın."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Bağlantı quraşdırılması"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Xahiş edirik, aşağıdakıları doldurun ya da seçin"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "Kart IRQ"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kart mem (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "Kart GÇ"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "Kart IO_0"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "Kart IO_1"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Şəxsi telefon nömrəniz"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "İnternet xidmət vericinizin adı (məsələn azeronline.com)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "İXM telefon nömrəsi"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "Provayder DNS-i 1 (arzuya görə)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "Provayder DNS-i 2 (arzuya görə)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Yığma modu"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Bağlantı sürəti"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Bağlantı vaxt dolması (saniyə sonra)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Hesab Girişi (istifadəçi adı)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Hesap Şifrəsi"
-
-#: network/netconnect.pm:382
-#, fuzzy, c-format
-msgid "Cable: account options"
-msgstr "Dialup: hesab seçimləri"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Quraşdırılacaq şəbəkə ara üzünü seç:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Şəbəkə Avadanlığı"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Xarici ISDN modem"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Avadanlıq seçin !"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN quraşdırılması"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Hansı növ kartınız var?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"İSA kartınız var isə sonrakı ekrandakı qiymətlər doğru olmalıdır.\n"
-"\n"
-"PCMCİA kartınız var isə kartınızın \"irq\" və ya \"io\"sunu bilməlisiniz.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Davam et"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Dayandır"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Hansı sizin ISDN kartınızdır?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Sürücü"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Hansı protokolu istifadə etmək istəyirsiniz?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"İnternet xidmət vericinizi seçin.\n"
-"Siyahıda deyilsə Siyahıda deyil'-i seçin."
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Provayder: "
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Modeminiz sistem tərəfindən dəstəklənmir.\n"
-"http://www.linmodems.org ünvanına baxın"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Quraşdırılacaq modemi seçin:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Provayderinizi seçin:"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Dialup: hesab seçimləri"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Bağlantı adı"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Telefon nömrəsi"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Giriş adı"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "Dialup: IP parametrləri"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "IP parametrləri"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP ünvanı"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Subnet maskası"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Dialup: DNS parametrləri"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Domen adı"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya görə)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "İkinci DNS Vericisi (arzuya görə)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "IP-dən qovşaq adını seç"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Şəbəkə Keçidi"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "Şəbəkə keçişi IP ünvanı"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "ADSL quraşdırılması"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Xahiş edirik, ADSL provayderinizi seçin"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"Alcatel mikrokoduna ehtiyacınız var.\n"
-"Onu indi bir disket ya da windows bölməsi vasitəsiylə verə\n"
-"bilərsiniz, ya da keçib daha sonra edə bilərsiniz."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Disket işlət"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Windows bölməmi işlət"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Bunu sonra et"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "Firmware köçürülməsi bacarılmadı, %s faylı tapılmadı"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "Firmware köçürülməsində müvəffəqiyyət"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Alcatel mikrokoduna ehtiyacınız var.\n"
-"Onu buradan endirib:\n"
-"%s\n"
-"/usr/share/speedtouch içinə mgmt.o adı ilə köçürün"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "Virtual Path ID (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "Virtual Circuit ID (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "Enkapsulyasiya :"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, fuzzy, c-format
-msgid "Could not install the %s package!"
-msgstr "Xorg paketi qurula bilmir: %s"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Zeroconf qovşaq adı həlli"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "%s şəbəkə avadanlığı qurulur (sürücü %s) "
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Xahiş edirik, bu kompüter üçün IP qurğularını girin.\n"
-"Hər üzv nöqtəli onluq IP şəklində girilməlidir,\n"
-"(misal üçün 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "DHCP ünvanı üçün qovşaq adı tə'yin edin"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "DHCP qovşaq adı"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Şəbəkə kartının id'sini izlə (laptoplar üçün faydalıdır)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Ani Şəbəkə Fəallaşdırılması (Network Hotplugging)"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Açılışda başlat"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, fuzzy, c-format
-msgid "Metric"
-msgstr "məhdudlaşdır"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP alıcısı"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Bağlantı vaxt dolması (saniyə sonra)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "DNS Verici IP'si"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Şəbəkə keçişi ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "Xəbərdarlıq : %s IP ünvanı çox vaxt tutulmuş olur !"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s onsuzda istifadədədir\n"
-
-#: network/netconnect.pm:1167
-#, fuzzy, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Səbəbsiz bir sürücü seçilir"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, fuzzy, c-format
-msgid "Install a new driver"
-msgstr "Sistemin qurulumu"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr ""
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "İdrə Modu"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Ad-hoc"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "İdarə edilən"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Əsas"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Təkrarlayıcı"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "İkinci"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Avtomatik"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Şəbəkə adı (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "Şəbəkə ID-si"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "İşləmə tezliyi"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "Həssaslıq aralığı"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Vuruş sıxlığı (v/s olaraq)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "Fraqmentasiya"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig əmri əlavə arqumentləri"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy əmri əlavə arqumentləri"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv əmri əlavə arqumentləri"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Tezliyin yanına k, M ya da G şəkilçisi qoyulmalıdır (misal üçün, 2.46 GHz "
-"tezlik üçün \"2.46G\" ), ya da lazım olan qədər '0' (sıfır) əlavə edin."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Sıxlığın yanına k, M ya da G şəkilçisi qoyulmalıdır (misal üçün, 11M üçün "
-"\"11M\" ), ya da lazım olan qədər '0' (sıfır) əlavə edin."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Xahiş edirik, kompüterinizn adını girin.\n"
-"Məsələn``kompüteradı.sahəadı.com''.\n"
-"Əgər şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Qovşaq adı (arzuya görə)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Ev sahibi adı"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "DNS vericisi 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "DNS vericisi 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "DNS vericisi 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "Axtarış domeni"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Şəbəkə Keçidi (mis. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Şəbəkə keçidi avadanlığı"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS vericisi ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Şəbəkə keçişi ünvanı 1.2.3.4 şəklində olmalıdır"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf Qovşaq adı"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf qovşaq adı . (nöqtə) daxil edə bilməz"
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Siz İnternetə bağlanmanın bir neçə yöntəmini quraşdırmışsınız.\n"
-"İstifadə etmək istədiyinizi seçin.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "İnternet bağlantısı"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Quraşdırma qurtardı, dəyişiklikləri tətbiq etmək istəyirsiniz ?"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
-
-#: network/netconnect.pm:1478
-#, fuzzy, c-format
-msgid "Automatically at boot"
-msgstr "Açılışda başlat"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, fuzzy, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Şəbəkə yenidən başladılmalıdır. Yenidən başlatmaq istəyirsiniz?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Şəbəkə Quraşdırılması"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Şəbəkənin yenidən başladılması sırasında xəta oldu: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "İndi internetə bağlanmağı sınamaq istəyirsiniz?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Bağlantınız sınanır..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Sistem indi İnternetə bağlıdır."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Təhlükəsizlik səbəbi ilə, indi bağlantı qopacaqdır."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Sisteminiz İnternetə bağlı görünmür.\n"
-"Bağlantınızı yenidən quraşdırın."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Təbrik edirik, internet və şəbəkə quraşdırılması bitdi.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
-"verici adı xəsarətləri meydana gələ bilər."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Quraşdırma sırasında xətalar yarandı.\n"
-"net_monitor ya da mcc vasitəsiylə bağlantınızı sınayın. Əgər "
-"bağlantınızyoxdursa, quraşdırmanı yenidən başladın."
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Şəbəkədən quraşdırması apardığınız üçün şəbəkəniz onsuzda quruludur.\n"
-"Qurğuları saxlamaq üçün Oldu'ya, İnternet və Şəbəkə qurğularınızı yenidən "
-"quraşdırmaq üçün isə Ləğv et'ə basın.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"Gözlənilməyən xəta baş verdi:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Vəkil vericilər quraşdırılması"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP vəkil verici"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP vəkili"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Vəkil http://... şəklində olmalıdır."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL 'ftp:' ya da 'http:' ilə başlamalıdır"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Atəş divarı quruluşu tapıldı!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Diqqət! Var olan Firewall qurğusu tapıldı. Yükləmədən sonra bir az əl "
-"gəzdirə bilərsiniz."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"Xahiş edirik, internetə bağlı olan ara üzün adını dirin.\n"
-"\n"
-"Nömunələr:\n"
-"\t\tppp+ modem ya da DSL bağlantıları üçün, \n"
-"\t\teth0, ya da eth1 kabel bağlantıları üçün, \n"
-"\t\tippp+ isdn bağlantısı üçün.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Disket daxil edin"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Kök cərgəsində %2$s olan FAT ilə şəkilləndirilmiş %1$s disketini taxın və %3"
-"$s düyməsinə basın"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Disketə icazə xətası, %s avadanlığı bağlana bilmədi"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "bağlama bacarılmadı: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Bu platformda genişlədilmiş bölmələr dəstəklənmir"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Bölmə cədvəlinizdə bir boşluq var, amma o da işlədilə bilmir.\n"
-"Bu boşluğu, genişlədilmiş bölmənin yanına daşımaq üçünbirinci bölmənizi "
-"daşımalısınız."
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s faylından geri yükləmə xətası: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Xətalı ehtiyat faylı"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s faylına yazma xətası"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Sürücünüzdə bə'zi pis şeylər baş verir.\n"
-"Mə'lumatın bütövlüyünün yoxlanması bacarılmadı. \n"
-"Bu o demekdir ki diskə yazılan hər şey təsadüfi və pozulmuş olacaq."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "sınamağa dəyər"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "vacib"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "çox ə'la"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "ə'la"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "bəlkə"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "Fayllar göndərilir..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(%s üstündə)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(bu sistem üstündə)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Digər kompüterlər üstündə quraşdırılmış olan"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "\"%s\" CUPS vericisi üstündə"
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Əsas)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Çap et, Növbəyə alma"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Sətir Çapçı Demonu"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Yeni Nəsil"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Ümumi Unix Çap Sistemi"
-
-#: printer/data.pm:151
-#, fuzzy, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Ümumi Unix Çap Sistemi"
-
-#: printer/data.pm:152
-#, fuzzy, c-format
-msgid "Remote CUPS"
-msgstr "Uzaq CUPS vericisi"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Namə'lum Model"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Yerli Çapçı"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Uzaq Çapçı"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Uzaq CUPS vericisi üstündəki çapçı"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Uzaq lpd vericisi üstündəki çapçı"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Şəbəkə çapçısı (TCP/Soket) "
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT üstündə çapçı"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "NetWare Vericisi üstündəki çapçı"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Çapçı avadanlığı URI'sini girin"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Vəzifəni əmrin içinə borula"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "məsləhət edilən"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Namə'lum model"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "Bu kompüter üstündə quraşdırılmış olan"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " %s paralel qapısında"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", USB çapçı #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", USB çapçı"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", paralel qapıdakı HP çapçı"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", USB üstündəkı HP çapçı"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", HP JetDirect üstündəkı HP çapçı"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", HP çapçı"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", %s nömrəli paralel qapıdakı çox funksiyalı avadanlıq"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", paralel qapıdakı çox funksiyalı avadanlıq"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", USB üstündə çox funksiyalı avadanlıq"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", HP JetDirect üstündə çox funksiyalı avadanlıq"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", çox funksiyalı avadanlıq"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", %s'a çap edilir"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " \"%s\" LPD vericisi üstündə, \"%s\" çapçısı"
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP qovşaq \"%s\", qapı %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " SMB/Windows vericisi üstündə \"%s\", bölüşülmüş sahə \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " Novell vericisi üstündə \"%s\", çapçı \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", %s əmri ilə"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "%s nömrəli paralel qapı"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "USB çapçı #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "USB çapçı"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "paralel qapıdakı HP çapçı"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "USB üstündəkı HP çapçı"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "HP JetDirect üstündəkı çapçı"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "HP çapçı"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "%s nömrəli paralel qapıdakı çox funksiyalı avadanlıq"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "Paralel qapıdakı çox funksiyalı avadanlıq"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "USB üstündə çox funksiyalı avadanlıq"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "HP JetDirect üstündə çox funksiyalı avadanlıq"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Çox funksiyalı avadanlıq"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "%s'a çap edir"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr " \"%s\" LPD vericisi, \"%s\" çapçısı"
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "TCP/IP qovşağı \"%s\", qapı %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "SMB/Windows vericisi \"%s\", bölüşülmüş sahə \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Novell vericisi \"%s\", çapçı \"%s\""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "%s əmrini işlət"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Adi çapçı (Sürücüsüz)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Yerli şəbəkə(lər)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "\"%s\" ara üzü"
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Şəbəkə %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Qovşaq %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Qapı %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"HP LaserJet 1000 çapçısı başladılmadan əvvəl firmware-inin yüklü "
-"olmasılazımdır. HP veb saytından Windows sürü paketini endirin "
-"(çapçınınCD'sindəki firmware işləmir) və bu açıla bilən '.exe' faylını "
-"'unzip' vasitəsi ilə açıb 'sihp1000.img' faylını tapın. Daha sonra onu '/etc/"
-"printer' cərgəsinə köçürün. Bundan sonra o artıq çapçının hər "
-"başladılmasında avtomatik olaraq yüklənəcək.\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "CUPS çapçı qurğuları"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Burada, sisteminizə bağlı çapçıların uzaqdakı sistemlər və hansıları "
-"tərəfindən istifadə edilə biləcəyini tə'yin edə bilərsiniz."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Eyni zamanda uzaq sistemlərdəki çapçıların bu kompüterdə avtomatik olaraq "
-"mövcud olmasına qərar verə bilərsiniz."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Bu sistemdəki çapçılar diqər sistemlər üçün də açıqdır"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Uzaq kompüterlərdəki mövcud çapçıları avtomatik tap"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Qovşaqlar/şəbəkələr üstündə çapçı bölüşülməsi: "
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Xüsusi quraşdırma"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Uzaq sistem yoxdur"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Əlavə CUPS vericiləri:"
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Yerli şəbəkənizdəki uzaq CUPS vericilərindəki çapçıya yetişmə səlahiyyəti "
-"almaq üçün sadəcə olaraq \"Uzaq sistemlərdəki mövcud çapçıları avtomatik tap"
-"\" seçimini işarələməlisiniz; CUPS vericiləri, sisteminizi öz  çapçıları "
-"haqqında avtomatik mə'lumatlandırırlar. Hazıda sisteminizdəki bütün bilinən "
-"çapçılar Printerdrake-nin əsas pəncərəsindəki \"Uzaq çapçılar\" "
-"bölməsindəyer alır. Əgər CUPS vericiləriniz yerli şəbəkənizdə deyilsə, çapçı "
-"mə'lumatını vericidən almaq üçün buraya IP adres(lər)i və istəyə bağlı "
-"olaraq qapı nömrə(lər)sini daxil etmək məcburiyyətindəsiniz."
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Yaponca mətn çap etmə modu"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Bunu fəallaşdırma yapon dilindəki xam mətnlərin çap edilə bilməsinə imkan "
-"verəcək. Bunu yalnız yapon dilində mətn çap etmək istəyirsinizsə seçin, ona "
-"görə ki bu seçili ikən bə'zi latın hərfləri, səhifə kənarları və hərf "
-"böyüklükləri düzgün çap ediləyəcək. Bu qurğu yalnız bu sistem üstündəki "
-"çapçılar tə'sir edir. Əgər uzaq bir kompüterdə yaponca mətn çap etmək "
-"arzunuz varsa bu qurğunu o uzaq kompüterdə fəal etməlisiniz."
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "CUPS quraşdırılmasının avtomatik düzəldilməsi"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Bu seçim fəal olanda CUPS'un hər başlanğıcında bunlar yoxlanır:\n"
-"\n"
-"- əgər LPD/LPRng quruludursa, /etc/printcap CUPS tərəfindən üstündən qeyd "
-"edilməyəcək\n"
-"\n"
-"- əgər /etc/cups/cupsd.conf əksikdirsə, yaradılacaq\n"
-"\n"
-"- çapçı mə'lumatı yayımlananda, verici adı olaraq \"localhost\" daxil "
-"etməməsini.\n"
-"\n"
-"Əgər bu ölçülərdən biri sizi problemə soxursa bu seçimi fəallaşdırmayın."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Açıq"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Bağlı"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Yerli çapçıların bölüşülməsi"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Yerli olaraq bağlı olan çapçı bu sistem və şəbəkələr üçün də mövcud "
-"olmalıdır:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Qovşaq/şəbəkə əlavə et"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Seçili qovşaq/şəbəkəni dəyişdir"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Seçili qovşaq/şəbəkəni sil"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "Qovşağın/şəbəkənin IP ünvanı:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Yerli çapçıların mövcud ediləcəyi şəbəkə ya da qovşağı seçin:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "Qovşaq/şəbəkə IP ünvanı əksikdir."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Daxil edilən qovşaq/şəbəkə IP ünvanı düzgün deyil.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Düzgün IP nümunələri:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Bu qovşaq/şəbəkə onsuzda siyahıdadır, yenidən əlavə edilə bilməz.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Uzaq CUPS vericilərindəki çapçılara yetişin"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Çapçılarını itifadə etmək istədiyiniz CUPS vericilərini buraya əlavə edin. "
-"Bunu sadəcə olaraq vericilərin çapçı mə'lumatlarını yerli şəbəkəyə yaymaması "
-"vəziyyətində etməlisiniz."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Verici əlavə et"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Seçili vericini düzəlt"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Seçili vericini çıxart"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Çapçılarını işlətmək istədiyiniz qovşağın IP ünvanı və qapısını daxil edin."
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Əgər qapı nömrəsi verilməszə, əsas olaraq 631 alınacaq."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "Verici IP'si əksikdir!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Daxil edilən IP səhvdir.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Qapı nömrəsi ədəd olmalıdır!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Bu verici onsuzda siyahıdadır, yenidən əlavə edilə bilməz.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Qapı"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, fuzzy, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Uzaq lpd vericisi üstündəki çapçı"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, fuzzy, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Qovşaq/şəbəkə IP ünvanı əksikdir."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Çapçı datası oxunur..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "CUPS yenidən başladılır..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Çapçı Bağlantısı Seçin"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Çapçınız hansı şəkildə bağlıdır?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Uzaq CUPS vericiləri üçün burada heç bir qurğuyaa lüzüm yoxdur;Bu çapçılar "
-"avtomatik təsbit ediləcəkdir."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-
-#: printer/printerdrake.pm:627
-#, fuzzy, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr "Çapçının avtomatik aşkar edilməsi (Yerli, TCP/Soket, və SMB çapçıları)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, fuzzy, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Offset müsbət rəgəm olmalıdır!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Sisteminiz yoxlanır..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "və bir namə'lum çapçı"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "və %d namə'lum çapçı"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Aşağıdakı çapçılar\n"
-"\n"
-"%s%s\n"
-"sisteminizə birbaşa bağlıdır"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Aşağıdakı çapçı\n"
-"\n"
-"%s%s\n"
-"sisteminizə birbaşa bağlıdır"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Aşağıdakı çapçı\n"
-"\n"
-"%s%s\n"
-"sisteminizə birbaşa bağlıdır"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Sisteminizə birbaşa bağlı olan bir namə'lum çapçı var"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Sisteminizə birbaşa bağlı ilan %d namə'lum çapçı mövcuddur"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Sisteminizə birbaşa bağlı olan heç bir çapçı aşkar ediləmyib"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Bütün çapçılarınızın açıq və fəal olduğundan əmin olun).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Çap etməni yuxarıdakı çapçılarda yoxsa yerli şəbəkə üstündəki çapçılarda "
-"fəal etmək istəyirsiniz?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Yerli şəbəkədəki çapçılarda çap etmə icazəsi vermək istəyirsiniz?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Yuxarıdakı çapçılar ilə çap etməyi fəallaşdırmaq istəyirsiniz?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Həqiqətən də bu sistemdə çap sistemini quraşdırmaq istəyirsiniz?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"QEYD: Çapçı modeli və çap sisteminə bağlı olaraq %d MB'a qədər əlavə "
-"tə'minatqurulacaq."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Yeni çapçılar axtarılır..."
-
-#: printer/printerdrake.pm:833
-#, fuzzy, c-format
-msgid "Found printer on %s..."
-msgstr "\"%s\" çapçısı çıxardılır..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr "üstündə"
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Çapçı modeli seçkisi"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Hansı model çapçınız var?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"Printerdrake %s çapçınızın modelini aşkar edə bilmədi. Xahiş edirik, "
-"siyahıdan düzgün modeli seçin."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Əgər çapçınız siyahıda yer almırsa, uyğun olanı (baxın çapçı istifadə "
-"kitabı) seçin."
-
-#: printer/printerdrake.pm:875
-#, fuzzy, c-format
-msgid "Configuring printer on %s..."
-msgstr "\"%s\" çapçısı quraşdırılır..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "\"%s\" çapçısı quraşdırılır..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Yeni çapçı əlavə et"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Çapçı Quraşdırma Sehirbazına Xoş Gəldiniz\n"
-"\n"
-"Bu sehirbaz kompüterinizə, şəbəkədəki sistemlərin və bu sistemin işlədə "
-"biləcəyi yerli ya da uzaq çapçıları quraşdırmaqda sizə yardım edəcək. \n"
-"O, çap sistemini quraşdırmaq üçün lazım olan bütün mə'lumatları sizdən "
-"soruşacaq və mövcud olan bütün çapçılara, sürücü seçimlərinə və çap bağlantı "
-"növlərinə yetişmə imkanı verəcək."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Çapçı Quraşdırma Sehirbazına Xoş Gəldiniz\n"
-"\n"
-"Bu sehirbaz kompüterinizə, birbaşa şəbəkəyə ya da uzaq Windows sistemə\n"
-"bağlı olan çapçı ya da çapçıları quraşdırmaqda sizə yardım edəcək.\n"
-"\n"
-"Xahiş edirik, bu kompüterə bağlı olan bütün çapçıları açın ki avtomatik "
-"aşkar edilə bilsinlər. Eyni zamanda şəbəkə kompüterləriniz və Windows\n"
-"sistemləri də açıq olmalıdır.\n"
-"\n"
-"Qeyd edin ki, şəbəkə və Windows sistemləri üstündəki çapçıların avtomatik\n"
-"aşkar edilməsi sisteminizə bağlı olan çapçıların açkar edilməsindən daha "
-"uzun\n"
-"müddət alır, ona görə də əgər onlara ehtiyacınız yoxdursa bunların "
-"avtomatik\n"
-"aşkar edilməsini bağlayın.\n"
-"\n"
-" Hazır olanda \"Sonrakı\" düyməsinə, çapçılarınızı indi quraşdırmaq "
-"istəmirsinizsə\"Ləğv Et\" düyməsinə basın."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Çapçı Quraşdırma Sehirbazına Xoş Gəldiniz\n"
-"\n"
-"Bu sehirbaz kompüterinizə bağlı olan çapçı ya da çapçıları quraşdırmaqda "
-"sizə yardım edəcək.\n"
-"\n"
-"Xahiş edirik, bu kompüterə bağlı olan bütün çapçıları açın ki avtomatik "
-"aşkar edilə bilsinlər.\n"
-"\n"
-" Hazır olanda \"Sonrakı\" düyməsinə, çapçılarınızı indi quraşdırmaq "
-"istəmirsinizsə\"Ləğv Et\" düyməsinə basın."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Çapçı Quraşdırma Sehirbazına Xoş Gəldiniz\n"
-"\n"
-"Bu sehirbaz kompüterinizə ya da birbaşa şəbəkəyə bağlı olan çapçı ya\n"
-"da çapçıları quraşdırmaqda sizə yardım edəcək.\n"
-"\n"
-"Xahiş edirik, bu kompüterə bağlı olan bütün çapçıları açın ki avtomatik "
-"aşkar edilə bilsinlər. Eyni zamanda şəbəkə kompüterləriniz də açıq "
-"olmalıdır.\n"
-"\n"
-"Qeyd edin ki, şəbəkə üstündəki çapçıların avtomatik aşkar edilməsi "
-"sisteminizə\n"
-"bağlı olan çapçıların açkar edilməsindən daha uzun müddət alır, ona görə "
-"də \n"
-"əgər onlara ehtiyacınız yoxdursa bunların avtomatik aşkar edilməsini "
-"bağlayın.\n"
-"\n"
-" Hazır olanda \"Sonrakı\" düyməsinə, çapçılarınızı indi quraşdırmaq "
-"istəmirsinizsə\"Ləğv Et\" düyməsinə basın."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Çapçı Quraşdırma Sehirbazına Xoş Gəldiniz\n"
-"\n"
-"Bu sehirbaz kompüterinizə bağlı olan çapçı ya da çapçıları quraşdırmaqda "
-"sizə yardım edəcək.\n"
-"\n"
-"Xahiş edirik, bu kompüterə bağlı olan bütün çapçıları açın ki avtomatik "
-"aşkar edilə bilsinlər.\n"
-"\n"
-" Hazır olanda \"Sonrakı\" düyməsinə, çapçılarınızı indi quraşdırmaq "
-"istəmirsinizsə\"Ləğv Et\" düyməsinə basın."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Bu kompüterə bağlı olan çapçıları avtomatik aşkar et"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Yerli şəbəkəyə birbaşa bağlı olan çapçıları avtomatik aşkar et"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Microsoft Windows işlədən kompüterlərə bağlı olan çapçıları avtomati aşkar et"
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "Avtomatik təsbit et"
-
-#: printer/printerdrake.pm:1171
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Təbrik edirik, çapçınız indi quraşdırıldı və işlədilməyə hazırdır!\n"
-"\n"
-"Proqramların \"Çap Et\" əmrini istifadə edərək çap edə bilərsiniz.(Bu əmr "
-"ümumiyyətlə \"Fayl\" menyusunda yer alır).\n"
-"\n"
-"Əgər çapçı ilə əlaqəli hər hansı bir qurğu yerinə gətirmək, ya da yeni çapçı "
-"əlavə etmək / çapçı silmək istəyirsinizsə, Mandriva Linux İdarə Mərkəzindəki "
-"\"Avadanlıq\" bölməsində yer alan in the \"Çapçı\" düyməsini istifadə edin."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, fuzzy, c-format
-msgid "Could not install the %s packages!"
-msgstr "Xorg paketi qurula bilmir: %s"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Çapçının avtomatik aşkar edilməsi"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Avadanlıqlar tapılır..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", şəbəkə çapçısı \"%s\", qapı %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", çapçı \"%s\" SMB/Windows vericisi \"%s\" üstündə"
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "%s tapıldı"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "%s nömrəli paralel qapıdakı çapçı"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Şəbəkə çapçısı \"%s\", qapı %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "\"%2$s\" SMB/Windows vericisi üstündəki \"%1$s\" çapçısı"
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Yerli Çapçı"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Heç bir yerli çapçı tapılmadı! Çapçını əllə qurmaq üçün giriş sahəsinə "
-"avadanlıq/fayl adını daxil edin (Paralel Qapılar: /dev/lp0, /dev/lp1, ..., "
-"bunlara bərabərdir: LPT1:, LPT2:, ..., 1ci USB çapçı: /dev/usb/lp0, 2ci USB "
-"çapçı: /dev/usb/lp1, ...vs)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Avadanlıq ya da fayl adı daxil etməlisiniz!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Çapçı aşkar edilmədi!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Yerli Çapçılar"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Mövcud çapçılar"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Aşağıdakı çapçı avtomatik olaraq aşkar edildi."
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Əgər o quraşdırmaq istədiyiniz deyilsə, giriş sətirinə avadanlıq/fayl adını "
-"daxil edin"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Alternativ olaraq, avadanlıq/fayl adını giriş sətirinə yaza bilərsiniz"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Avtomatik aşkar edilən çapçıların siyahısı. "
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Xahiş edirik, quraşdırmaq istədiyiniz çapçını seçin ya da giriş "
-"sətirinəavadanlıq/fayl adı daxil edin"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Çap vəzifələrinin hansı çapçıya gedəcəyini seçin ya da giriş sətirində "
-"avadanlıq/fayl adı daxil edin"
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Xahiş edirik, quraşdırmaq istədiyiniz çapçını seçin. Çapçının quraşdırılması "
-"tamamilə avtomatik olacaq. Əgər çapçınız düzgün açkar edilməyibsə ya "
-"daxüsusiləşdirilmiş çap quraşdırması istəyirsinizsə, \"Əllə quraşdırma\"nı "
-"seçin."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Hazırda, başqa heç bir alternativ mövcud deyil"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Xahiş edirik, quraşdırmaq istədiyiniz çapçını seçin. Çapçının quraşdırılması "
-"tamamilə avtomatik olacaq. Əgər çapçınız düzgün açkar edilməyibsə ya "
-"daxüsusiləşdirilmiş çap quraşdırması istəyirsinizsə, \"Əllə quraşdırma\"nı "
-"seçin."
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Çap vəzifələrinin hansı çapçıya gedəcəyini seçin."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Çapçınızın bağlı olduğu qapını seçin ya da giriş sətirində avadanlıq/fayl "
-"adı daxil edin"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Çapçınızın hansı qapıya bağlı olduğunu seçin."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralel Qapılar: /dev/lp0, /dev/lp1, ..., bunlara bərabərdir LPT1:, "
-"LPT2:, ..., 1ci USB çapçı: /dev/usb/lp0, 2ci USB çapçı: /dev/usb/lp1, ...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Çapçı avadanlığını seçməli/girməlisiniz!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, fuzzy, c-format
-msgid "Aborting"
-msgstr "Dayandır"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Uzaq lpd Çapçı Seçimləri"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Uzaqdakı bir lpd çapçısını istifadə etmək üçün, çapçının bağlı olduğu çapçı "
-"vericisinin qovşaq adını və o vericidəki çapçının adınını verməlisiniz."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Uzaq qovşaq adı"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Uzaq çapçı adı"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Uzaqdakı qovşağın adı əksikdir!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Uzaq çapçı adı əksikdir!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Mə'lumat"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Aşkar edilən model: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Şəbəkə yoxlanır..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", \"%2$s\" vericisi üstündəki \"%1$s\" çapçı"
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "\"%2$s\" vericisi üstündəki \"%1$s\" çapçı"
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Çapçı Seçimləri"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"SMB çapçısına çap etmək üçün, SMB qovşaq adını (Qeyd! Bu onun TCP/IP "
-"qovşaqadından fərqli ola bilər!) və mümkünsə çap vericisiniz IP ünvanını, "
-"yetişmək istədiyiniz çapçının bölüşmə adını, qəbul edilə bilən istifadəçi "
-"adı, şifrə və iş qrupu mə'lumatını bildirməlisiniz."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Əgər çapçı avtomatik aşkar edilibsə, onu siyahıdan seçin və sonralazımdırsa "
-"istifadəçi adı, şifrə və/ya da iş qrupu adını əlavə edin."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "SMB verici adı"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB verici IP'si"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Paylaşdırma adı"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "İş qrupu"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Avtomatik təsbit edilən"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Ya verici adı ya da IP'si verilməlidir!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Samba bölüşülən sahə adı əksikdir!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "TƏHLÜKƏSİZLİK XƏBƏRDARLIĞI!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Şifrəli Windows hesabı üçün çap sistemini quraşdırmaq üzrəsiniz. Samba "
-"alıcısındakı bir xətaya görə Samba çap vəzifəsini Windows vericisinə "
-"daşırkən şifrəni xam mətn formatında ötürür. Ona görə də bu sistemdəkihər "
-"istifadəçi \"ps auxwww\" kimi əmrlə şifrənin ekranda göstərilməsini zorlaya "
-"bilər.\n"
-"\n"
-"Sizə bu alternativləri işlətməyi məsləhət edirik: (bütün hallarda "
-"Windowsvericinizə yalnız yerli şəbəkənizdəki sistemlərin yetişmə səlahiyyəti "
-"olmasındanəmin olun, misal üçün atəş divarı mə'nasında):\n"
-"\n"
-"Windows vericinizdə şifrəsi olmayan hesabı işlədin, misal üçün \"GUEST\" ya "
-"daçap üçün xüsusuiylə yaradılmış başqa bir hesab. Şəxsi və administrator "
-"hesablarının şifrəsini qətiyyən silməyin.\n"
-"\n"
-"Windows vericinizi, çapçını LPD protokolu altında mövcud etməsi üçün "
-"quraşdırın.Daha sonra bu sistemdə, Printerdrake'də bağlantı növü \"%s\" olan "
-"çap sisteminiquraşdırın.\n"
-"\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Windows vericinizi çapçını IPP protokolu altında mövcud qılması üçün "
-"quraşdırın və bu sistemdən Printerdrake vasitəsi ilə \"%s\" bağlantınövlü "
-"çap sistemini quraşdırın.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Çapçınızı bir Linuks vericisinə bağlayıb Windows sistem(lər)ə ona alıcı "
-"olaraq bağlanmaya icazə ver.\n"
-"\n"
-"Həqiqətən də davam etmək istəyirsiniz?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare Çapçı Qurğuları"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare çapçısında çap etmək üçün, NetWare çap vericisinin adı (Qeyd! Bu TCP/"
-"IP qovşaq adından fərqli ola bilər) və yetişmək istədiyiniz çapçının çap "
-"növbəsi adı ilə bərabər istifadəçi adı va şifrəsi verilməlidir."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Çapçı Vericisi"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Çapçı Növbə Adı"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP verici adı əksikdir!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP növbə adı əksikdir!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", qovşaq \"%s\", qapı %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Qovşaq \"%s\", qapı %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket Çapçı Qurğuları"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Siyahıdan avtomatik aşkar edilən çapçılardan birini seçin ya da giriş "
-"sahələrinə qovşaq adı ya da IP ünvanı və istəyə bağlı qapı nömrəsini (əsası "
-"9100) daxil edin."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"TCP ya da soket çapçısına çap etmək üçün, çapçının IP ünvanı ya da qovşaq "
-"adınıvə istəyə bağlı olaraq qapı nömrəsini bildirməlisiniz (əsası 9100). HP "
-"JetDirect vericiləri üstündə qapı nömrəsi adətən 9100'dür, başqa vericilərdə "
-"bu fərqli ola bilər. Avadanlığınızın kitabına baxın."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Çapçı qovşaq adı ya da IP'si əksikdir!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Çapçı qovşaq adı ya da IP"
-
-#: printer/printerdrake.pm:2012
-#, fuzzy, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Çapçı mə'lumatları yenilənir..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "Çapçı Avadanlığı URI'si"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Çapçıya yetişə bilmək üçün birbaşa URI verə bilərsiniz. URI, ya CUPS ya "
-"daFoomatic xassələrini daxil etməlidir.Qeyd: Her URI növünü her çap hovuzu "
-"dəstəkləməz."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Düzgün URI girilməlidir!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "Əmri borula"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Burada siz, birbaşa çapçıya göndərmək yerinə vəzifənin borulanacağı hər "
-"hansı bir əmr sətirini müəyyən edə bilərsiniz."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Əmr sətiri"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "Əmr sətiri daxil edilməlidir!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, fuzzy, c-format
-msgid "HPLIP"
-msgstr "PL_IP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr ""
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Çapçınız HP ya da Sony'dən çox-funksiyalı avadanlıqdır (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 darayıcı ilə, DeskJet 450, Sony "
-"IJP-V100), HP PhotoSmart ya da HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "%s paketi qurulur..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, fuzzy, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-"İsitafadəçilər üçün xas quraşdırma qovluqları yaradıla bilmədi `%s':%s\n"
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Avadanlıq yoxlanır və %s quraşdırılır..."
-
-#: printer/printerdrake.pm:2277
-#, fuzzy, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Onu hansı sektora daşımaq istəyirsiniz?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "SANE paketləri qurulur..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "mtools paketləri qurulur..."
-
-#: printer/printerdrake.pm:2467
-#, fuzzy, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "HP çox-funksiyalı avadanlığınız üstündə foto yaddaş kartına səlahiyyət"
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "HP çox-funksiyalı avadanlığınız üstündə axtarılır"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "HP çox-funksiyalı avadanlığınız üstündə foto yaddaş kartına səlahiyyət"
-
-#: printer/printerdrake.pm:2509
-#, fuzzy, c-format
-msgid "Configuring device..."
-msgstr "Quraşdırılır..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Çapçı qapısı CUPS üçün açılır..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Çapçı mə'lumat bazası oxunur..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Çapçı Adı və Şərhləri Daxil Edin"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Çapçı adı ancaq hərf, rəqəm və alt xətt daxil edə bilər"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Çapçı \"%s\" onsuzda mövcuddur,\n"
-"həqiqətən də onun quraşdırmasının üstündən yazmaq istəyirsiniz?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Hər çapçının bir adı olmalıdır (misal üçün: \"çapçı\"). İzahat və "
-"Mövqesahələrini doldurmaq məcbur deyil. Onlar istifadəçilərə mə'lumat vermək "
-"üçündür."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Çapçı adı"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "İzahat"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Mövqe"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Çapçı mə'lumat bazası hazırlanır..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Çapçınızın modeli"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake, çapçı avtomatik aşkarından əldə edilən çapçı adını onun "
-"mə'lumat bazasında yer alan çapçıların siyahısı ilə ən uyğununu tapmaq üçün "
-"müqayisə etdi. Bu seçim bə'zən səhv ola bilər, misal üçün, çapçınızın adı "
-"mə'lumat bazasında heç yer almırsa. Ona görədə seçimin düz olub olmadığına "
-"baxın və əgər düzgündürsə \"Model düzgündür\" düyməsini, deyilsə \"Modeli "
-"əllə seç\" düyməsinə basaraq növbəti ekranda çapçınızı seçin.\n"
-"\n"
-"Çapçınız üçün Printerdrake bunu tapdı:\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Model düzgündür"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Modeli əllə seç"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Xahiş edirik, çapçınızın modelinin avtomatik açkar edilib edilmədiyini seçin "
-"\"Xam çapçı\" ya da səhv model seçilidirsə, siyahıdan düzgün modeli tapın."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "PPD faylını buradan qur"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "Floppi Disk"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "Başqa yer"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "PPD faylını seç"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "%s PPD faylı mövcud deyil ya da oxuna bilmir!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "%s PPD faylı PPD spesifikasiyalarına uyğun gəlmir!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "PPD faylı qurulur..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI winprinter qurğuları"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"OKI lazer winprinter quraşdırırsınız. Bu çapçılar çox xüsusi rabitə "
-"protokolu\n"
-"işlədir və yalnız BİRİNCİ paralel qapıya bağlananda işləyir. Xahiş edirik, "
-"bunu bir daha yoxlayın, əgər çapçınız başqa qapıya bağlıdırsa, sürücü onu "
-"rədd edəcəkdir."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet qurğuları"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Lexmark tərəfindən verilən inkjet çapçı sürücüləri ilə çapçı yalnız yerli, "
-"sistemdə quraşdırıla bilər, yəni şəbəkədəki başqa bir çapçıya bu sürücülərlə "
-"yetişə bilməzsiniz. Xahiş edirik, çapçınızı sisteminizə bağlayın ya da bu "
-"sürücüləri çapçının bağlı olduğu kompüterdə qurun."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Lexmark mürəkkəb fıskırtmalı çapçını və qurğuları istifadə edərək çap "
-"etməküçün Lexmark (http://www.lexmark.com/) tərəfindən tə'yin edilən "
-"sürücülərəehtiyacınız var. \"Sürücülər\" bağlantısına tıqlayın. Modelinizi "
-"və sonra əməliyyat sistemi olaraq \"Linuks\"u seçin. Sürücülər RPM paketi "
-"vəya interaktiv qrafiki qurulumu olan qabıq skriptləridir. Bu quraşdırmanı "
-"qrafiki ara üzlə etməniz məcburi deyil. Lisenziya razılaşmasından sonra. "
-"birbaşa çıxın. Daha sonra \"lexmarkmain\" ilə çapçı başı hizalama "
-"səhifəsiniçap edin və baş hizalamasını bu proqram vasitəsiylə quraşdırın."
-
-#: printer/printerdrake.pm:3245
-#, fuzzy, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Lexmark inkjet qurğuları"
-
-#: printer/printerdrake.pm:3246
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Lexmark tərəfindən verilən inkjet çapçı sürücüləri ilə çapçı yalnız yerli, "
-"sistemdə quraşdırıla bilər, yəni şəbəkədəki başqa bir çapçıya bu sürücülərlə "
-"yetişə bilməzsiniz. Xahiş edirik, çapçınızı sisteminizə bağlayın ya da bu "
-"sürücüləri çapçının bağlı olduğu kompüterdə qurun."
-
-#: printer/printerdrake.pm:3268
-#, fuzzy, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Səs quraşdırılması"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Lexmark tərəfindən verilən inkjet çapçı sürücüləri ilə çapçı yalnız yerli, "
-"sistemdə quraşdırıla bilər, yəni şəbəkədəki başqa bir çapçıya bu sürücülərlə "
-"yetişə bilməzsiniz. Xahiş edirik, çapçınızı sisteminizə bağlayın ya da bu "
-"sürücüləri çapçının bağlı olduğu kompüterdə qurun."
-
-#: printer/printerdrake.pm:3295
-#, fuzzy, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Əllə TCP/IP quraşdırması"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "HP LaserJet 1000 üçün Firmware-Upload"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Çapçı əsas qurğuları\n"
-"\n"
-"Səhifə böyüklüyü, mürəkkəb növü/pçap modu (mövcuddursa) və eyni zamanda da "
-"lazer çapçılar üçün avadanlıq qurğularının düzgün seçildiyini "
-"yoxlamalısınız. Diqqət edin ki çox yüksək çap keyfiyyəti və həlledilirliyi "
-"ilə çap əməliyyatı yavaşlaya bilər."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Əsas çapçı qurğuları"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "%s seçimi integer rəqəmi olmalıdır!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "%s seçimi rəqəm olmalıdır!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "%s qurğusu əhatə xaricindədir!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"(\"%s\") çapçısını əsas çapçı olaraq\n"
-"tə'yin etmək istəyirsiniz?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Sınaq səhifələri"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Xahiş edirik, çap etmək istədiyiniz sınaq səhifələrini seçin.\n"
-"Qeyd: foto sınaq səhifəsinin çapı uzun müddət ala bilər və alçaq yaddaşı "
-"olan lazer çapçılarda heç çıxmaya da bilər. Çox vaxt standart sınaq "
-"səhifəsini çap etmək kifayətdir."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Sınaq səhifələri yoxdur"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Çap Et"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Sıravi sınaq səhifəsi"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ çap səhifəsi (Məktub)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativ sınaq səhifəsi (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Foto sınaq səhifəsi"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Sınaq səhifəsini çap etmə"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Sınaq səhifə(ləri)si çap edilir..."
-
-#: printer/printerdrake.pm:3743
-#, fuzzy, c-format
-msgid "Skipping photo test page."
-msgstr "Foto sınaq səhifəsi"
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Sınaq səhifə(ləri)si çapçıya göndərildi.\n"
-"Çapçının işə başlaması üçün bir az vaxt keçə bilər.\n"
-"Çap vəziyyəti:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Sınaq səhifə(lər)si çapçıya göndərildi.\n"
-"Çapçının işləməyə başlaması üçün bir az vaxt lazım ola bilər.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Düzgün işlədi?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Xam çapçı"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Əmr sətirindən faylı çap etmək üçün (terminal pəncərəsi) bu əmri işlədin: \"%"
-"s <fayl>\" Qrafiki çap vasitəsi ilə isə əmr belə verilməlidir: \"xpp <fayl>"
-"\" ya da \"kprinter <fayl>\". Qrafiki fasitələr sizə çapçını və qurğuları "
-"asanlıqla seçməyə icazə verir.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Eləcə də bir çox proqramın \"Çap əmri\" sahəsində bu əmrlərdənbirini işlədə "
-"bilərsiniz. Yalnız bu cür istifadədə çap ediləcək faylın adını proqram "
-"verəcəyi üçün fayl adı verilməz.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\" əmri eyni zamanda səciyyəvi çap vəzifəsinin seçim qurğularını "
-"dəyişdirməyə icazə verir. Sadəcə olaraq uyğun gələn qatarı əmr sətirinə "
-"əlavə edin, mis. \"%s <fayl>\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Hazırkı çapçı üçün mövcud olan seçimlər siyahısını almaq üçün \"Seçimlər  "
-"siyahısını göstər\" düyməsinə basın ya da aşağıdakı siyahını oxuyun.%s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hazırkı çapçı üçün mövcud olan çap seçimləri siyahısı:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Əmr sətirindən (terminal pəncərəsi) bir faylı çap etmək üçün bu əmri işlədin "
-"\"%s <fayl>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Eləcə də bir çox proqramın \"Çap əmri\" sahəsində bu əmrlərdənbirini işlədə "
-"bilərsiniz. Yalnız bu cür istifadədə çap ediləcək faylın adını proqram "
-"verəcəyi üçün fayl adı verilməz.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Hazırkı çapçı üçün mövcud olan seçimlər siyahısını almaq üçün \"Seçimlər "
-"siyahısını göstər\" düyməsinə basın."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Əmr sətirindən (terminal pəncərəsi) bir faylı çap etmək üçün bu əmrləri "
-"işlədin: \"%s <fayl>\" ya da \"%s <fayl>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Qurğuları sazlamaq və çap vəzifələrini yerinə gətirmək üçün eyni zamanda "
-"\"xpdq\"dən də istifadə edə bilərsiniz.\n"
-"Əgər masa üstü mühidi olaraq KDE işlədirinizsə, masa üstünüzdə adı \"Çapçını "
-"DAYANDIR!\" olan \"panika düyməsi\", mövuddur, bu düyməyəbasılanda bütün çap "
-"vəzifələri birbaşa dayandırılır. Bu xususilə çapçı tıxanmalarında "
-"faydalıdır.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" və \"%s\" əmrləri eyni zamanda səciyyəvi çap vəzifəsinin seçim "
-"qurğularını dəyişdirməyə icazə verir. Sadəcə olaraq uyğun gələn qatarı əmr "
-"sətirinə əlavə edin, mis. \"%s <fayl>\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "\"%s\" üstündə Çap/Darama/Foto Kartları"
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "\"%s\" üstündə çap etmə/darama"
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "\"%s\" üstündə Printing/Photo Card Access"
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "%s çapçısında çap edilir"
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "%s çapçısında çap edilir"
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Seçimlər siyahısını göstər"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, fuzzy, c-format
-msgid " - Print head alignment\n"
-msgstr "Üfüqi tərəfləmə"
-
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "Rəng quraşdırması"
-
-#: printer/printerdrake.pm:3959
-#, fuzzy, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"Çox-funksiyalı avadanlığınız avtomatik daraya bilmək üçün quraşdırılıb. İndi "
-"siz əmr sətirindən \"scanimage\" ilə (birdən çox darayıcınız varsa,"
-"\"scanimage -d hp:%s\" ilə darayıcınızı bildirin) ya da qrafiki ara üzdə "
-"işləyən\"xscanimage\" ya da \"xsane\" proqramlarıyla darama edə bilərsiniz. "
-"Əgər GIMP işlədirsinizsə, eyni zamanda \"Fayl\"/\"Al\" menyusundan bunu "
-"həyata keçirə bilərsiniz. Ətraflı mə'lumat üçün əmr sətirindəya da fayl "
-"idarəçinizdə \"man scanimage\" əmrini verin.\n"
-"Bu avadanlıq üçün \"scannerdrake\"ni işlətməyin!"
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Çapçınız avtomatik olaraq sisteminizdəki foto kart sürücülərinə yetişmək "
-"üzrə quraşdırılıb. Artıq foto kartlarınıza \"MtoolsFM\" adlı qrafiki "
-"tə'minat ilə (Menyuda \"Tə'minatlar\" -> \"Fayl vasitələri\" -> \"MTools "
-"Fayl İdarəçisi\") ya da \"mtools\" əmr sətiri ilə (əmr sətirində \"man mtools"
-"\" yazıb mə'lumat ala bilərsiniz) yetişə bilərsiniz. Kartın fayl sisteminə "
-"\"p:\" sürücü hərfindən, dahaçox foto kartlı HP çapçınız varsa, ondan sonra "
-"gələn hərflərdən yetişə bilərsiniz. \"MtoolsFM\"da sürücü hərfləri arasında "
-"keçişi fayl siyahılarının sağ üst güncündəki sahədən həyata keçirə "
-"bilərsiniz."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Çapçı qurğularını transfer et"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Çap hovuzunu %s yerinə %s etmək üçün çapçı qurğularınızı köçürəbilərsiniz. "
-"Bütün qurğu mə'lumatı (çapçı adı, izahatı, yeri, bağlantı növüvə əsas "
-"seçimlər) köçürüldüyü vaxt, sırada olan vəzifələr transfer edilməyəcək.\n"
-"Qeyd: Aşağıdakı səbəplərdən ötrü bütün sıralar transfer edilə bilməz:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS Novell vericilərindəki ya da mə'lumatı sərbəst-şəkilli formda "
-"göndərənçapçıları dəstəkləmir.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ yalnız yerli çapçıları, uzaq LPD çapçıları, və Socket/TCP çapçılarını "
-"dəstəkləyir.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD və LPRng IPP çapçılarını dəstəkləmir.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Əlavə olaraq, bur proqram ya da \"foomatic-configure\" vasitəsilə "
-"yaradılmayan növbələr transfer edilə bilməz."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Eyni zamanda, firmaları tərəfindən verilən PPD faylları ilə ya da doğma CUPS "
-"sürücüləri ilə qurğulanan çapçılar transfer edilə bilməz."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Transfer etmək istədiyiniz çapçıları işarələyin və  \n"
-"\"Transfer Et\" düyməsinə basın."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Çapçıları qətiyyən daşıma"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Transfer Et"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" adında bir çapçı onsuzda %s altında mövcuddur . \n"
-"Üstündən yazmaq üçün \"Transfer\"ə basın.\n"
-"Həmçinin, yeni bir ad daxil edə bilər ya da  çapçını keçə bilərsiniz."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Yeni çapçı adı"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "%s daşınır..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Siz köhnə əsas çapçınızı (\"%s\") transer etdiniz, onun eyni zamanda hazırkı "
-"%s çap etmə sistemində də əsas olmasını istəyirsiniz?"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Çapçı mə'lumatları yenilənir..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Şəbəkə başladılır..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Şəbəkəni indi quraşdır"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Şəbəkə fəalliyyəti quraşdırılmayıb"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Bir çəbəkə çapçısını quraşdırma üçün şəbəkəyə yetişmə səlahiyyətiniz var, "
-"yalnız hələ quraşdırılmayıb. Şəbəkə quraşdırması olmadan indi quraşdırmaq "
-"istədiyiniz çapçını işədə bilməyəcəksiniz. Necə davam etmək istəyirsiniz?"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Şəbəkəni quraşdırmadan davam et"
-
-#: printer/printerdrake.pm:4195
-#, fuzzy, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"Qurulum sırasında edilən şəbəkə quraşdırılması indi başladıla bilməz. Xahiş "
-"dirik, sistem açılandan sonra şəbəkənin işlədiyini yoxlayın və Mandriva "
-"Linux İdarə Mərkəzindəki Şəbəkə və İnternet bölməsindən qurğuları düzəldin, "
-"və ondan sonra yenə də Mandriva Linux İdarə Mərkəzindəki \"Avadanlıq\"/"
-"\"Çapçı\" bölməsindən çapçınızı qurun."
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Şəbəkəyə yetişmə işləmirdi fə başladıla bilmədi. Xahiş edirik, "
-"avadanlığınızıvə qurğularınızı yoxlayın. Sonra uzaqdakı çapçınızı yenidən "
-"qurğulamaya çalışın."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Çap etmə sistemi yenidən başladılır..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "yüksək"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "paranoid"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "%s təhlükəsizlik səviyyəsində çap etmə sistemini qur"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"%s çap sistemini %s təhlükəsizlik səviyyəsində icra edəcək bir quruluma "
-"başlamaq üzrəsiniz.\n"
-"\n"
-"Bu çap sistemi, çap vəzifələrini gözlərkən və yazdırarkən bir arxa plan "
-"gedişatı olaraq işləyir. Bu gedişata şəbəkə üstündəki digər sistemlər yetişə "
-"bilər və buna görə də hücumlar da arta bilər. Digər yandan, yalnız bir neçə "
-"proqram bu təhlükəsizlik səviyyəsində əsasolaraq başladıla bilər.\n"
-"\n"
-"Bu sistemdə həqiqətən də çap sisteminin quraşdırılmasını istəyirsiniz?"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Başlarkən çap etmə sistemi işə salınır"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Çap sistemi (%s) sistemin açılışında avtomatik olaraq başladılmayacaq.\n"
-"\n"
-"Çap sistemi mümkünatı olan bir hücüm nöqtəsi olduğuna görə daha yüksək\n"
-"təhlükəsizlik səviyyəsinə ehtiyacı var və buna görə də avtomatik "
-"başladmanın.\n"
-"qeyri-fəallaşdırılılması daha uyğun yol olacaq.\n"
-"Çap sisteminin avtomatik başladılmasını yenə də istiyirsiniz?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "Qurulu proqramlar yoxlanır..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "%s silinir ..."
-
-#: printer/printerdrake.pm:4310
-#, fuzzy, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Çap sistemini dəyişdir"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "%s qurulur ..."
-
-#: printer/printerdrake.pm:4334
-#, fuzzy, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Çap sistemini dəyişdir"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#: printer/printerdrake.pm:4418
-#, fuzzy, c-format
-msgid "Name or IP of remote server:"
-msgstr "Uzaq lpd vericisi üstündəki çapçı"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Əsas Çapçı Seçilir..."
-
-#: printer/printerdrake.pm:4458
-#, fuzzy, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Uzaq CUPS vericisi üstündəki çapçı"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, fuzzy, c-format
-msgid "Local CUPS printing system"
-msgstr "CUPS çap sistemini quraşdır"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Çap Sistemini Seçin"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hansı çapçı sistemi (spooler) istifadə etmək istəyirsiniz?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "\"%s\" çapçısı quraşdırıla bilmədi!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Foomatic Qurulur..."
-
-#: printer/printerdrake.pm:4597
-#, fuzzy, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr ""
-"Darayıcı(ları)nızı bölüşdürmək üçün lazım olan paket(lər) qurula bilmədi."
-
-#: printer/printerdrake.pm:4789
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Aşağıdakı çapçılar quraşdırılıb. Qurğularını dəyişdirmək üçün, mə'lumatı "
-"görmək üçün ya da onu əsas çapçı seçmək üçün çapçıya cüt tıqlayın."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Mövcud olan bütün uzaq CUPS çapçılarını göstər"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Çapçı siyahısını yenilə (Mövcud bütün uzaq CUPS çapçılarını göstərmək üçün)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS quraşdırılması"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Çap sistemini dəyişdir"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Normal Mod"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Mütəxəssis Modu"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Çapçı seçimləri"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Çapçı qurğularını dəyişdir"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"%s%s çap edicisi\n"
-"Bu çapçı üstündə nəyi dəyişdirmək istəyirsiniz?"
-
-#: printer/printerdrake.pm:5165
-#, fuzzy, c-format
-msgid "This printer is disabled"
-msgstr "Bu bölmə ölçüləndirilə bilməz"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Bunu et!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Çapçı bağlantı növü"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Çapçı adı, izahatı, yeri"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Çapçı e'malatçısı, modeli, sürücüsü"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Çapçı e'malatçısı, model"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Bu çapçını əsas tə'yin et"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, fuzzy, c-format
-msgid "Enable Printer"
-msgstr "Vericini Fəallaşdır"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, fuzzy, c-format
-msgid "Disable Printer"
-msgstr "Vericini Qeyri-fəallaşdır"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Sınaq səhifələri çap et"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Bu çapçını necə istifadə edəcəyinizi öyrənin"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Çapçını çıxart"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Köhnə \"%s\" çapçısı çıxardılır..."
-
-#: printer/printerdrake.pm:5272
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "\"%2$s\" vericisi üstündəki \"%1$s\" çapçı"
-
-#: printer/printerdrake.pm:5277
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "VPN bağlantısı indi qeyri-fəallaşdırıldı."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Həqiqətən də \"%s\" çapçısını silmək istəyirsiniz?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "\"%s\" çapçısı çıxardılır..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Əsas çapçıi"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "\"%s\" çapçısı indi əsas çapçı oldu."
-
-#: raid.pm:42
-#, fuzzy, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Disk bölməsi,  _formatted_ RAİD md%d'ə əlavə edilə bilmədi"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d səviyyə RAİD üçün çatmayan sayda disk bölməsi\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "/usr/share/sane/firmware cərgəsi yaradıla bilmədi!"
-
-#: scanner.pm:107
-#, fuzzy, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "/usr/share/sane/firmware cərgəsi yaradıla bilmədi!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr "%s firmware faylı /usr/share/sane/firmware mövqeyinə köçürülə bilmədi!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "%s firmware faylı üçün lazımi səlahiyyətlər müəyyən edilə bilmədi!"
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-"Darayıcı(ları)nızı bölüşdürmək üçün lazım olan paket(lər) qurula bilmədi."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr "Darayıcı(ları)nız ali istifadəçi olmayanlar üçün mövcud olmayacaqdır."
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "Səhv IPv4 xəta ismarışlarını qəbul et/etmə"
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr " Translasiya edilən icmp echo'sunu Qəbul Et/Rədd Et"
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr "icmp əks sədasını qəbul/rədd et."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Avtomatik girişə icazə ver/vermə."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"\"ALL\" seçilidirsə, /etc/issue və /etc/issue.net mövcudiyyətinə icazə "
-"veriləcək.\n"
-"\n"
-"NONE seçilidirsə, heç birinə icazə verilməyəcək.\n"
-"\n"
-"Əks halda isə yalnız /etc/issue üçün icazə veriləcək."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "Konsol istifadəçisinə yenidən başlatma icazəsi ver/vermə"
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Ali istifadəçinin uzaqdan girişinə icazə ver/vermə"
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Birbaşa ali istifadəçinin girişinə icazə ver/vermə"
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Sistemdəki ekran idarəçilərində (gdm və kdm) istifadəçilərin siyahısının "
-"göstərilməsinə icazə Ver/Vermə."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"X bağlantılarına icazə Ver/Vermə:\n"
-"\n"
-"- HAMISI (bütün bağlantılara icazə ver),\n"
-"\n"
-"- YERLİ (yalnız yerli kompüterdən gələn bağlantıya icazə ver),\n"
-"\n"
-"- HEÇBİRİ (heç bir bağlantıya icazə vermə)."
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"Bu arqument alıcıların X vericisinə 6000cı qapıdan bağlanma\n"
-"icazələrinin olub olmamasını müəyyən edir."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"Səlahiyyətləndirmə:\n"
-"\n"
-"- əgər \"ALL\" seçilidirsə, tcp_wrapper'lər tərəfindən idarə edilən bütün "
-"xidmətlər (baxın hosts.deny(5) man səhifəsi)\n"
-"\n"
-"- əgər \"LOCAL\" seçilidirsə,yalnız yerlilər\n"
-"\n"
-"- əgər \"NONE\" seçilidirsə, heç biri.\n"
-"\n"
-"Xidmətləri səlahiyyətləndirmək üçün, /etc/hosts.allow faylını işlədin (baxın "
-"hosts.allow(5))."
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"Əgər SERVER_LEVEL (yada SECURE_LEVEL əksikdirsə)\n"
-"/etc/security/msec/security.conf içində 3'dən böyükdürsə,\n"
-"/etc/security/msec/server.<SERVER_LEVEL> ünvanına gedən.\n"
-"/etc/security/msec/server simvolik körpüsünü yaradar.\n"
-"\n"
-"/etc/security/msec/server, chkconfig --add tərəfindən\n"
-"paketlərin qurulması sırasında əgər mövcuddursa faylın içinə\n"
-"xidmət əlavə etmək üçün istifadə edilir."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"crontab və at'ı istifadəçilər üçün fəal/qeyri fəal et.\n"
-"\n"
-"İcazə verilən istifadəçiləri /etc/cron.allow və /etc/at.allow (baxın man at"
-"(1)\n"
-"və crontab(1)) içinə daxil edin."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-"12 konsola sysloq raportlarının göndərilməsini Fəallaşdır/Qeyri-fəallaşdır"
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"Ad həlledilirliyi gizləmə qorumasını fəallaşdırr/qeyri-fəallaşdır.\n"
-"Əgər \"%s\" seçilidirsə, eyni zamanda syslog'a da raport ediləcək."
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Təhlükəsizlik Xəbərdarlıqları:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "IP qizləmə qorumasını Fəallaşdır/Qeyri-fəallaşdır."
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "Sistemdə libsafe tapılsa, libsafe Fəal/Qeyri-Fəal edilsin."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "Qəribə IPv4 paketlərininm qeyd edilməsini Fəallaşdır/Qeyri-fəallaşdır"
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Saat başı msec təhlükəsizlik yoxlamasını Fəallaşdır/Qeyri-fəallaşdır"
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-" su xassəsini yalnız wheel qrupu üzvlərinə ya da hərkəsə açıq edilməsi."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "İstifadəçiləri səlahiyyətləndirmək üçün şifrə işlət."
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Eternet kartlarının nizamsızlıq yoxlamasını Fəallaşdır/Qeyri-Fəallaşdır."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr "Günlük təhlükəsizlik yoxlamasını Fəallaşdır/Qeyri-fəallaşdır"
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr "Tək istifadəçi səviyyəsində sulogin(8)-i fəallaşdır/qeyri-fəallaşdır."
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"msec tərəfindən şifrə vaxtının keçirilməsinə istisna olaraq ad əlavə et."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-"Şifrə vaxtının keçməsini \"maks\" gün et və \"qeyri-fəal\" vəziyyətə "
-"dəyişməyi gecikdir."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-"Şifrələrin yenidən istifadə edilməsinin qabağını almaq üçün şifrə keçmişi "
-"uzunluğunu müəyyən edin."
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Şifrənin minimal uzunluğunu, minimal rəqəm və minimal böyük hərf miqdarını "
-"seçin."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Ali istifadəçi umask'ını seç."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "əgər bəli seçilidirsə, açıq qapıları yoxla."
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"əgər bəli seçilidirsə, bunları yoxla :\n"
-"\n"
-"- boş şifrələri,\n"
-"\n"
-"- /etc/shadow içində şifrə olmamasını\n"
-"\n"
-"- ali istifadəçi xaricindəki id'si 0 olan başqa istifadəçiləri."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"əgər seçilidirsə, istifadəçilərin ev cərgələrindəki faylların "
-"səlahiyyətlərini yoxla."
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"əgər bəli seçilidirsə, şəbəkə avadanlıqlarının nizamsız modda olduğunu yoxla."
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "əgər bəli seçilidirsə, günlük təhlükəsizlik yoxlamalarını icra et"
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
-"Əgər bəli seçilidirsə, sgid fayllarının əlavələrini/silinəcəklərini yoxla."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "əgər bəli seçilidirsə, /etc/shadow'dakı boş şifrəni yoxla."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "əgər bəli seçilidirsə, suid/sgid fayllarının checksum'ını yoxla."
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"əgər bəli seçilidirsə, suid ali istifadəçi fayllarının əlavələrini/"
-"silinənlərini yoxla."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "əgər bəli seçilidirsə, yiyələnməmiş faylları raport et"
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"Əgər bəli seçilidirsə, hərkəs tərəfindən yazıla bilən fayl/cərgələri yoxla."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "Əgər bəli seçilidirsə, chkrootkit yoxlamalarını icra et."
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr "seçilidirsə, raportu bu ünvana yolla, əks halda raportu root'a yolla."
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "əgər bəli seçilidirsə, yoxlama nəticələrini poçtla göndər."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "Xəbərdarlıq edəcək məsələ yoxdursa poçt göndərmə"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-"Əgər bəli seçilidirsə, rpm mə'lumat bazasına qarşı bir neçə sınaq işə sal."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "əgər bəli seçilidirsə, yoxlama nəticələrini syslog'a raport et."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "əgər bəli seçilidirsə, yoxlama nəticəsini tty'yə raportlayır."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Qabıq əmrlərinin keçmiş böyüklüyünü müəyyən et. -1 qiyməti sonsuz mə'nasına "
-"gəlir."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "Qabıq vaxt dolmasını seç. Sıfır qiyməti vaxt dolması yoxdur deməkdir."
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "Vaxt dolması vahidi saniyədir"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "İstifadəçi umask'ını seç."
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Xətalı IPv4 xəta ismarışlarını qəbul et"
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Translasiya edilən icmp echo'nu qəbul et"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "icmp əks sədasını qəbul et"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* mövcuddur"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "Konsol sitifadəçisi tərəfindən yenidən başlatma"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Uzaq ali istifadəçi girişinə icazə ver"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "Birbaşa ali istifadəçi girişi"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr "Ekran idarəçilərində (kdm və gdm) istifadəçiləri göstər"
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "X Window bağlantılarına icazə ver"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "TCP bağlantılarını X Window'a səlahiyyətləndir"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "tcp_wrapper'lər tərəfindən idarə edilən bütün xidmətlərə icazə ver"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Chkconfig msec qaydalarına qulaq assın"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "İstifadəçilər üçün \"crontab\" və \"at\"i fəallaşdır"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "Sysloq 12 konsola raport göndərir"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "Ad həlledilirliyini gizlətmə qoruması"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "IP gizləmə qorumasını fəallaşdır"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "Sistemdə libsafe tapılsa, libsafe fəal edilsin"
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "Qəribə IPv4 paketlərininm qeyd edilməsini fəallaşdır"
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "msec saat başı təhlükəsizlik yoxlamasını fəallaşdır"
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr "su xassəsini yalnız wheel qrupu üzvlərinə ya da hərkəsə açıq et"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "İstifadəçiləri səlahiyyətləndirmək üçün şifrə işlət"
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "Eternet kartlarının promiscuity yoxlaması"
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "Günlük təhlükəsizlik yoxlaması"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "Tək istifadəçi səviyyəsində Sulogin(8)"
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Bunlar üçün şifrə vaxtının keçməsi olmasın"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-"Şifrə vaxtının keçişini və hesab qeyri-fəallaşdırma gecikmələrini müəyyən et"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Şifrə keçmişi uzunluğu"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "Şifrənin minimal uzunluğu, rəqəm və böyük hərf miqdarı"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "Ali istifadəçi umask'ı"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Qabıq keçmişi böyüklüyü"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Qabıq vaxt dolması"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "İstifadəçi umask'ı"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Açıq qapıları yoxla"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "Təhlükəli hesabları yoxla"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "İstifadəçilərin ev cərgələrindəki faylların səlahiyyətlərini yoxla"
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "Şəbəkə avadanlıqlarının nizamsız modda olub olmadığını yoxla"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Günlük təhlükəsizlik yoxlamalarını icra et"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "sgid fayllarının əlavələrini/silinəcəklərini yoxla"
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "/etc/shadow'dakı boş şifrəni yoxla"
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "suid/sgid fayllarının checksum'ını yoxla"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "suid ali istifadəçi fayllarının əlavələrini/silinənlərini yoxla"
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "Yiyələnməmiş faylları raport et"
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Hərkəs tərəfindən yazıla bilən fayl/cərgələri yoxla"
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "chkrootkit yoxlamalarını icra et"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "Lazım olmayanda poçt göndərmə"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr "Seçilibsə, poçtu bu ünvana göndər, edilməyibsə ali istifadəçiyə göndər"
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "Yoxlama nəticəsini poçt ilə raport et"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "rpm mə'lumat bazasına qarşı bir neçə sınaq işə sal"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Yoxlama nəticəsini syslog'a raport et"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Yoxlama nəticəsini tty'yə raportla"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Krakerlərə xoşgəlmişsiniz"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Zəif"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Yüksək"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Daha Yüksək"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu səviyyə RAİD-i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
-"asand\n"
-"işlədiləcək, ancaq xətalara qarşı da həssaiyyəti də artacaqdır. İnternetə \n"
-"bağlı isəniz bunu tövsiyə etmirik. Şifrə ilə girilir."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Şifrələr fəallaşdırıldı, yenə də bir şəbəkə üstündə istifadə edilməməsi "
-"tövsiyə edilir."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Bu, İnternetə bağlı olan bir kompüter üçün standart və məsləhət edilən bir "
-"təhlükəsizlik səviyyəsidir."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Onsuzda bə'zi məhdudiyyətləriniz mövcuddur, və hər gecə daha çox avtomatik "
-"yoxlamalar edilir."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Bu təhlükəsizlik səviyyəsiylə sistemin bir verici olaraq istifadəsi "
-"mümkündür.\n"
-"Təhlükəsizlik, birdən çox alıcının bağlanmasına icazə verəcək şəkildə "
-"artırılmışdır. \n"
-"Qeyd: əgər sisteminiz İnternet üstündə sadə bir alıcıdırsa, daha aşağı olan "
-"səviyyəni seçin."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Bu, daha əvvəlki səviyyəyə bənzərdir, ancaq sistem tamamilə bağlıdır və "
-"təhlükəsizlik xüsusiyyətləri ən üst səviyyədədir."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec Əsas Seçimləri"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Xahiş edirik, uyğun təhlükəsizlik səviyyəsini seçin"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Təhlükəsizlik səviyyəsi"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Vericilər üçün libsafe işlət"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Buffer overflow və format string hücumlarına qarşı qoruyan kitabxana."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Təhlükəsizlik İdarəçisi (giriş ya da ePoçt)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA səs sistemini (Advanced Linux Sound Architecture) başlat"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anakron, periodik əmr zamanlayıcısı"
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd batareya vəziyyətini izləmək və syslog vasitəsiylə bunun qeydini tutmaq "
-"üçün istifadə edilir.\n"
-"Ayrıca batareya azalanda sistemi söndürmək üçün də istifadə edilir."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at əmri, zamanlanan əmrləri işləmələri lazım gələn vaxtda işlədir.\n"
-"Sistem yükü lazımi qədər alçaq olduğunda yığma əmrləri işlədilir."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, istifadəçilərə xüsusi əmrləri periodik olaraq işə sala bilən\n"
-"standart bir UNIX proqramıdır. vixie cron, standart cron'a əlavə edilmiş bir "
-"çox\n"
-"yeni xüsusiyyət daxildir."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
-"edər.\n"
-"Ayrıca konsolda siçanla kəsmə və yapışdırma əməliyyatlarına da imkan verər.\n"
-"Konsolda pop-up menyu dəstəyi verər."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake avadanlıq sınağı aparır və istəyə görə yeni/dəyişdirilmiş "
-"avadanlıqları quraşdırır."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi üçün "
-"istifadə edilir."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (qısaca inetd ) bir çox \n"
-"başqa internet xidmətcisini lazım gəldiyi zaman işa salır. İçində telnet, "
-"ftp, rsh və rlogin kimi proqramın olduğu xidmətləri işə salmaqla məs'uldur.\n"
-"inetd-ni sistemden çıxarmaq, onun məs'ul olduğu bütün xidmətləri\n"
-"rədd etmək mə'nasını daşıyır."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Linuks 2.2 seriyası çəyirdəklərində atəş divarı\n"
-"qurmaq üçün paket süzülməsini başlat."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura düzülüşünü yüklər.\n"
-"Hansı klaviatura düzülüşü istifadə ediləcəyi kbdconfig ilə seçilir.\n"
-"Bu, çoxu kompüterdə fəal buraxılmalıdır."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/usr/include/linux/{autoconf,version}.h üçün \n"
-"/boot cərgəsində avtomatik çəyirdək başlığının yaradılması"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Texniki avadanlığın açılışda avtomatik təsbiti və qurulması."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf sistem qurğularınızı idarə edən proqramları,\n"
-"müxtəlif vəzifələri açılışda icra edər."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd, lpr-nin düzgün olaraq işləməsi üçün lazımi çapçıi vasitəsidir.\n"
-"lpd əsasən, çap vəzifələrini idarə edən və onları çapçıya göndərən vericidir."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, yüksək qabiliyyətli vericilər qurmaq üçün işlədilir."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) verici adlarını IP ünvanlarına çevirənDomen Adı Vericisidir "
-"(DNS)."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Bütün Şəbəkə Fayl Sistemlərini (NFS), SMB (Lan Manager/Windows), və \n"
-"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Açılış sırasında başlamaq üçün qurulmuş bütün şəbəkə axtar üzlərini "
-"fəallaşdırır ya da bağlayır."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir "
-"protokoldur.\n"
-"Bu xidmət, /etc/exports faylında qurğuları olan NFS vericisinin\n"
-"istifadəsinə imkan verər."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir \n"
-"protokoldur. Bu xidmət NFS fayl qıfılı istifadəsinə imkan verər."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Açılışda Xorg və konsolda numlock düyməsini\n"
-"avtomatik olaraq aç."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w və uyğun winprinter'ləri dəstəklə."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"PCMCİA dəstəyi, laptoplarda eternet və modem kimi avadanlıqların "
-"dəstəklənməsinə imkan verər.\n"
-"Qurulmadığı vaxtda açılışda işləməz, işləməsinə ehtiyac olmayan\n"
-"kompüterlərdə qurulu olması problem yaratmaz."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper, NFS ve NIS kimi protokollar tərəfindən istifadə edilən RPC \n"
-"bağlantılarını təşkilatlandırır. Portmap vericisi RPC mexanizmini işlədən\n"
-"protokollarla xidmət edən kompüterlərdə qurulmalıdır və işlədilməlidir."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Posfix, elektronik məktubların bir kompüterdən digərinə yollayan \n"
-"Məktub Yollama Vasitəsidir (Mail Transport Agent)."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Yüksək keyfiyyət təsadüfi rəqəm istehsal edən sistem entropi hovuzunun \n"
-"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Oracle ya da DVD çalğıcılar kimi tə'minatların istifadəsi üçün xam\n"
-"avadanlıqları blok avadanlıqlara tə'yin et (sabit disk bölmələrikimi)"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed vasitəsi avtomatik IP router cədvəlinin RIP protokolu tərəfindən\n"
-"yenilənməsinə imkan verər. RIP əsasən kiçik şəbəkələrdə istifadə edilir, "
-"daha böyük\n"
-"şəbəkələrdə daha qarışıq routing protokollarına ehtiyacı vardır."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı hər hansı bir\n"
-"kompüter haqqındakı qabiliyyət ölçüləri ala bilmələrinə imkan verər."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokolu bir şəbəkədəkı istifadəçilərin o şəbəkədəkı kompüterlərdə\n"
-"işləyən istifadəçiləri görməsinə imkan verər."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"rwho protokolu, uzaq istifadəçilərin, rwho vasitəsi işlədən bir kompüterdə\n"
-"olan bütün istifadəçiləri görmələrina imkan verər."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Kompüterinizdəki səs sistemini başladır"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog, bir çox vasitənin ismarıclarını müxtəlif sistem qeydlərində\n"
-"tutmalarına imkan verər. Syslog'un hər zaman işləməsi\n"
-"yaxşı fikirdir."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "USB avadanlığınız üçün sürücüləri yükləyin."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "X Font Vericisini başlat (Bu, Xorg icrası üçün məcburidir)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Açılışda avtomatik olaraq başlayacaq xidmətləri seçin"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Çap"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "İnternet"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Fayl bölüşməsi"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Uzaqdan İdarə"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Mə'lumat Bazası Vericisi"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "fəaliyyətdədir"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "dayandırılıb"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Xidmətlər və vasitələr"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Bu xidmət haqqında təəsüf ki\n"
-"əlavə mə'lumat yoxdur."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Mə'lumat"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "İstəniləndə başlat"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "Açılışda"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Başlat"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Dayandır"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Mandriva Linux Nədir?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "<b>Mandriva Linux</b> Xoş Gəldiniz!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-
-#: share/advertising/02.pl:13
-#, fuzzy, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/advertising/02.pl:15
-#, fuzzy, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Açıq Mənbə Dünyasına Xoş Gəldiniz!"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-
-#: share/advertising/03.pl:13
-#, fuzzy, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>Qeyd</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, fuzzy, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>Mandriva Linux cəmiyyətinə qoşulun!</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, fuzzy, c-format
-msgid "<b>Download Version</b>"
-msgstr "Bu Mandriva Linux <b>Endirmə buraxılışıdır</b>."
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, fuzzy, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Mandriva Linux Yeniləmələri Appleti"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr ""
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>KDE Seçimi</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, fuzzy, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Qrafiki Masa Üstü Mühitinizi Seçin!</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, fuzzy, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "OpenOffice.org Riyaziyyat"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, fuzzy, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Qeyd</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>İnternet gəz</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, fuzzy, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* Vebi <b>Mozilla və Konqueror</b> ilə qəzin"
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, fuzzy, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "FTP ilə faylları transfer et"
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, fuzzy, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* Rəsmlərinizi <b>The Gimp</b> ilə tərtib edin"
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-"\t* <b>OpenOffice.org</b> ilə offis sənədlərinizi yaradın, tərtib edin və "
-"bölüşün"
-
-#: share/advertising/18.pl:17
-#, fuzzy, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* Şəxsi mə'lumatlarınızı <b>Kontact</b> və <b>Evolution</b> ilə idarə edin "
-"və izləyin"
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* <b>Kopete</b> ilə onlayn söhbətdə yer alın"
-
-#: share/advertising/18.pl:20
-#, fuzzy, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* <b>KsCD</b> və <b>Totem</b> ilə audio CD-lərə və musiqi fayllarını "
-"dinləyin"
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* Rəsmlərinizi <b>The Gimp</b> ilə tərtib edin"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>İnkişaf vasitələri</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>İnkişaf vasitələri</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: xüsusiləşdirilə bilən və həqiqi zamanlı editor"
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-
-#: share/advertising/21.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>İnkişaf vasitələri</b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, fuzzy, c-format
-msgid "\t* Scripting languages:"
-msgstr "Çap Etmə idarəçisi"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr ""
-
-#: share/advertising/22.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>İnkişaf vasitələri</b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, fuzzy, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Vericilər</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, fuzzy, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "WinPopup ismarışlarını göndərin və alın"
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Vericilər</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: Ən çox işlədilən Veb vericisi"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Mandriva Linux İdarə Mərkəzi</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, fuzzy, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>KDE Seçimi</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, fuzzy, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "Bugün <b>store.mandriva.com</b> ünvanını ziyarət edin"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, fuzzy, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* <b>Kopete</b> ilə onlayn söhbətdə yer alın"
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Onlayn</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Ofis İş Stansiyası"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"İdarə proqramları: kəlmə işləyənlər (OpenOffice.org Writer, Kword), "
-"hesablayıcılar və pdf göstəriciləri, vs."
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"İdarə proqramları: kəlmə işləyənlər (kword, abiword), hesablayıcılar və pdf "
-"göstəriciləri, vs."
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Oyun stansiyası"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Məzəli proqramlar: arkad, lövhə oyunları, strategiya, vs"
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Multimedya stansiyası"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Səs və video çalınması/düzəliş proqramları"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "İnternet stansiyası"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Elektronik məktub və xəbər oxuyucu vasitələr dəstəsi (pine, mutt, tin..) və "
-"Veb səyyahları"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Şəbəkə Kompüteri (alıcı)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "SSH daxil bir çox protokolların alıcıları"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Quraşdırma"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Kompüter qurğularını asandlaşdıran vasitələr"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Konsol Vasitələri"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editorlar, rəflər, fayl vasitələri, terminallar"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C və C++ inkişaf kitabxanaları, proqramları və daxil ediləcək fayllar"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Sənədlər"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Linuks və sərbəst proqram tə'minatı haqqında Kitablar və Howtolar"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Linux Standartları Bazası. Üçüncü partiya tə'minat dəstəyi"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, fuzzy, c-format
-msgid "Groupware"
-msgstr "Qrup"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Kolab Vericisi"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Atəş Divarı/İstiqamətləndirici"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "İnternet keçidi"
-
-#: share/compssUsers.pl:96
-#, fuzzy, c-format
-msgid "Mail/News"
-msgstr "/Fayl/_Təze"
-
-#: share/compssUsers.pl:97
-#, fuzzy, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix poçt vericisi"
-
-#: share/compssUsers.pl:100
-#, fuzzy, c-format
-msgid "Directory Server"
-msgstr "CD'dən Geri Yüklə"
-
-#: share/compssUsers.pl:104
-#, fuzzy, c-format
-msgid "FTP Server"
-msgstr "NTP Verici"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr ""
-
-#: share/compssUsers.pl:108
-#, fuzzy, c-format
-msgid "DNS/NIS"
-msgstr "DNS"
-
-#: share/compssUsers.pl:109
-#, fuzzy, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Domen Adı Vericisi"
-
-#: share/compssUsers.pl:112
-#, fuzzy, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Çapçı Vericisi"
-
-#: share/compssUsers.pl:113
-#, fuzzy, c-format
-msgid "NFS Server, Samba server"
-msgstr "Samba vericisi"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Mə'lumat Bazası"
-
-#: share/compssUsers.pl:117
-#, fuzzy, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "PostgreSQL ya da MySQL mə'lumat bazası vericisi"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Veb/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Poçt"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Postfix poçt vericisi"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ya da MySQL mə'lumat bazası vericisi"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Şəbəkə Kompüter vericisi"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS vericisi, SMB vericisi, Vəkil vericisi, SSH verici"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "KDE iş stansiyası"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "KDE, əsas qrafiki ara üz və yardımçi proqramlar kolleksiyası"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "GNOME iş stansiyası"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"İstifadəçi dostu proqram və masa üstü ilə bərabər qrafiki ara üz vasitələri"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Başqa qrafiki ara üzlər"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs."
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Vasitələr"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "SSH Vericisi"
-
-#: share/compssUsers.pl:186
-#, fuzzy, c-format
-msgid "Webmin"
-msgstr "Veb kamerası"
-
-#: share/compssUsers.pl:187
-#, fuzzy, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Terminal Server Quraşdırılması"
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Şəbəkə İzlənməsi"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, fuzzy, c-format
-msgid "Mandriva Wizards"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/compssUsers.pl:197
-#, fuzzy, c-format
-msgid "Wizards to configure server"
-msgstr "\"%s\" çapçısı quraşdırıla bilmədi!"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : əsas cərgələri qeyd et.\n"
-"--debug              : bütün xəta ayırma ismarışlarını göstər.\n"
-"--show-conf        : eht. nüsxəsi alınacaq fayl və cərgələrin siyahısı.\n"
-"--config-info        : quraşdırma faylı seçimlərini başa sal (X istifadəçisi "
-"olmayanlar üçün).\n"
-"--daemon            : demon quraşdırmasını işlət. \n"
-"--help                 : bu ismarışı göstər.\n"
-"--version             : buraxılış nömrəsini göstər.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-
-#: standalone.pm:57
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[SEÇİMLƏR] [PROQRAM_ADI]\n"
-"\n"
-"SEÇİMLƏR:\n"
-"  --help             - bu yardım ismarışını göstər.\n"
-"  --report           - proqram Mandriva Linux vasitələrindən biri olmalıdır\n"
-"  --incident         - proqram Mandriva Linux vasitələrindən biri olmalıdır"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"Yazı növü idxalı və izlənməsi tə'minat                                     \n"
-"--windows_import : bütün mövcud windows bölmələrindən idxal et.\n"
-"--xls_fonts      : xls'dən osuzda mövcud olan bütün yazı növlərini göstər\n"
-"--strong         : yazı növünün güclü yoxlanması.\n"
-"--install        : bütün yazı növü fayl və cərqələrini qəbul et.\n"
-"--uninstall      : hər hansı bir yazı növü ya da yazı növü cərqəsini sil.\n"
-"--replace        : mövcuddursa yazı növünü üstündən əvəz et\n"
-"--application    : 0 heç bir tə'minat.\n"
-"                 : 1 mövcud olan bütün tə'minatlar dəstəklənir.\n"
-"                 : tə'minatın_adı staroffice üçün so kimi \n"
-"                 : və ghostscript üçün gs kimi."
-
-#: standalone.pm:84
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[SEÇİMLƏR]...\n"
-"Mandriva Terminal Vericisi Quraşdırıcısı\n"
-"--enable         : MTS'ni fəallaşdır\n"
-"--disable        : MTS'ni qeyri-fəallaşdır\n"
-"--start          : MTS'ni başlat\n"
-"--stop           : MTS'ni dayandır\n"
-"--adduser        : MTS'yə mövcud olan istifadəçi əlavə et (istifadəçi adı "
-"istənəcək)\n"
-"--deluser        : MTS'dən mövcud olan istifadəçini sil (istifadəçi adı "
-"istənəcək)\n"
-"--addclient      : MTS'yə alıcı sistem əlavə et (MAC ünvanı, IP, nbi əks adı "
-"istənəcək)\n"
-"--delclient      : MTS'dən alıcı sistemi sil (MAC ünvanı, IP, nbi əks adı "
-"istənəcək)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[klaviatura]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
-"[--file=faylım] [--word=kəlməm] [--explain=ifadəliqayda] [--xəbərdarlıq]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[SEÇİMLƏR]\n"
-"Şəbəkə və İnternet bağlantı və izləmə tə'minatı\n"
-"\n"
-"--defaultintf interface : əsas olaraq bu ara üzü göstər\n"
-"--connect : hələ bağlı deyilsə internetə bağlan\n"
-"--disconnect : hazırda internetə bağlıdırsa bağlantını kəs\n"
-"--force : (dis)connect ilə işlədilir : bağlanmağa/kəsməyə zorla.\n"
-"--status : bağlananda 1, əks halda 0 cavabı verir, sonra çıxır.\n"
-"--quiet : interaktiv olma. (dis)connect ilə işlədilmək üçün."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[SEÇİM]...\n"
-"  --no-confirmation      Mandriva Update modundabirinci təsdiqləmə  sualını "
-"soruşma\n"
-"  --no-verify-rpm        paket imzalarını yoxlama\n"
-"  --changelog-first      izahat pəncərəsində fayl siyahısından əvvəl "
-"changelog'u göstər\n"
-"  --merge-all-rpmnew     tapılan bütün .rpmnew/.rpmsave fayllarını "
-"birləşdirməyi təklif et"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [hərşey]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake həllerilirlik"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"İstifadə qaydası: %s  [--auto] [--beginner] [--expert] [-h|--help] [--"
-"noauto] [--testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, fuzzy, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr ""
-"Dəyişikliklərin fəal olması üçün hesabdan çıxış edib, yenidən girməlisiniz."
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Lütfen çıxın və Ctrl-Alt-BackSpace düymələrinə basın"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-"Dəyişikliklərin fəal olması üçün hesabdan çıxış edib, yenidən girməlisiniz."
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "Terminal Server olmadan faydasızdır"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s'n istifadəçi adına ehtiyacı var...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s bunları məcbur qılır: qovşaq adı, MAC ünvanı, IP, nbi-görünüşü, "
-"THIN_CLIENT üçün 0/1, Yerli Qurğu üçün 0/1...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: %s'ın qovşaq adına ehtiyacı var...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Terminal Server Quraşdırılması"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Vericini Fəallaşdır"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Vericini Qeyri-fəallaşdır"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Vericini Başlat"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Vericini Dayandır"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Disketi/ISO"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Şəbəkədən Açılış Görüntüləri"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "İstifadəçi əlavə et/sil"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Alıcı Əlavə Et/Sil"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Rəsmlər"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "İlk Dəfə Sehirbazı"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Sehirbazı Ləğv Et"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, fuzzy, c-format
-msgid "Use thin clients."
-msgstr "Zəyif alıcılara icazə ver."
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr ""
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Bu bir neçə dəqiqə sürəcək."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Qurtardı!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, fuzzy, c-format
-msgid "Terminal Server Overview"
-msgstr "drakTermServ İcmalı"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - Etherboot Dəstəkli Açılış Əksləri Yaradın:\n"
-"        \tÇəyirdəyi etherboot vasitəsi ilə açmaq üçün, xüsusi kernel/initrd "
-"əksi yaradılmalıdır.\n"
-"        \tmkinitrd-net bu işin əsas hissəsini həll edir və drakTermServ "
-"yalnız bu əksləri idarə\n"
-"        \tetmək/xüsusiləşdirmək üçün bir qrafiki ara üzdür. \n"
-"        \tdhcpd.conf faylı içində inlcude olaraq çağırılan \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include faylını yaratmaq üçün,\n"
-"        \tən az bir tam çəyirdək üçün etherboot əksləri yaratmalısınız."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"        - /etc/dhcpd.conf'u Saxla:\n"
-"        \t\tŞəbəkə açılış alıcılarına,hər alıcının IP ünvanı tə'yin edən "
-"dhcpd.conf giriçi mövcud olmalıdır\n"
-"        \t\tvə sistemə şəbəkə açılış əksləri üçün. drakTermServ bu girişləri "
-"yaratmaq/silmək üçün sizə yardım edir.\n"
-"\t\t\t\n"
-"        \t\t(PCİ kartları əksi işlətməyə bilər - etherboot düzgün əksi "
-"istəyəcəkdir. Siz, eyni zamanda\n"
-"        \t\tetherboot'un əksləri axtarırkən, bu cür ad gözləyir:\n"
-"        \t\tboot-3c59x.nbi yalnız boot-3c59x.2.4.19-16mdk.nbi kimi YOX).\n"
-"\t\t\t \n"
-"        \t\tTipik dhcpd.conf stanza disksiz alıcıları dəstəkləyir və buna "
-"bənzəyir: "
-
-# needs editing (Metin)
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-
-# needs editing (Metin)
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-
-# needs editing (Metin)
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - Alıcı başına %s:\n"
-"        \t\tclusternfs ilə, hər disksiz alıcının vericinin kök fayl "
-"sistemində özünə məxsus\n"
-"        \t\tquraşdırma faylları ola bilər. Yerli alıcı "
-"avadanlığıquraşdırmasına icazə verərək, \n"
-"        \t\tdrakTermServ bu faylları yaratmaqda yardımçı olacaq."
-
-# needs editing (Metin)
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ bu faylı mkinitrd-net-in yaratdığı əkslərləvə /etc/"
-"dhcpd.conf\n"
-"        \t\t ilə bərabər işləməsi üçün hər disksiz alıcı üçün quraşdıracaq \n"
-"        \t\tTipik quraşdırma faylı buna bənzəyir:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}"
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Açılış Disketi"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "Açılış ISO'su"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "PXE Əksi"
-
-#: standalone/drakTermServ:731
-#, fuzzy, c-format
-msgid "Default kernel version"
-msgstr "Çəyirdək buraxılışını göndər"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Bütöv Çəyirdəyi İnşa Et -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Heç bir çəyirdək seçilməyib!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Yeganə NIC İnşa Et -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "NIC seçili deyil!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Bütün Çəyirdəkləri İnşa Et -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Sil"
-
-#: standalone/drakTermServ:801
-#, fuzzy, c-format
-msgid "No image selected!"
-msgstr "NIC seçili deyil!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Bütün NBI'ləri Sil"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Sistemdəki mə'lumat bazasındakı şifrənin Terminal Verici\n"
-" mə'lumat bazasındakından fərqli olduğunu göstərir.\n"
-"Girişi fəallaşdırmaq üçün istifadəçini Terminal Vericiyə\n"
-"Silin/Yenidən əlavə edin."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "İstifadəçi əlavə et -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- İstifadəçini Sil"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "növ: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "yerli qurğu: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Yerli avadanlıq quraşdırılmasına\n"
-"icazə ver."
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "Heç bir şəbəkə açılış görüntüləri yaradılmadı!"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Zəyif Alıcı"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Zəyif Alıcılara İcazə Ver"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Alıcı Əlavə Et -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "növ: fat"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "növ: incə"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "yerli qurğu: səhv"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "yerli qurğu: düz"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Alıcını Düzəlt"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Yerli Qurğuları Qeyri-fəallaşdır"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Alıcını Sil"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd Qurğuları..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Dəyişikliklərin fəal olması üçün Displey İdarəçisi yenidən "
-"başladılmalıdır. \n"
-"(konsolda - service dm restart)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr ""
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Subnet:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Şəbəkə Maskası:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Routerlər:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet Maskası:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Translyasiya Ünvanı:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Domen Adı:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "Ad Vericiləri:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "IP Silsiləsi Başlanğıcı:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "IP Silsiləsi Sonu:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Qurğunu Yaz"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd Vericisi Qurğuları"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Bu qiymətlərin çoxu hazırkı sisteminizdə\n"
-"alınmışdır. Lazım gələrsə\n"
-"dəyişdirə biləcəksiniz."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Xahiş edirik, disketi taxın:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Disketə yetişə bilmədim!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "İndi disket çıxardıla bilər"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Disket sürücüsü mövcud deyil!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "PXE əksi %s/%s-dir"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "%s/%s yazma xətası"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO görüntüsü budur: %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Nəsə səhv işlədi! - mkisofs quruludur?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Əvvəlcə /etc/dhcpd.conf yaradılmalıdır!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s istifadəçi deyil..\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s onsuz da Terminal Server istifadəçisidir\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr ""
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "%s Terminal Server-ə əlavə edildi\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "%s silindi...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "%s tapılaa bilmədi...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-"/etc/hosts.allow və /etc/hosts.deny onsuzda quraşdırılıb - dəyişdirilmədi"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Qurğu dəyişdirildi - clusternfs/dhcpd yenidən başladılsın?"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Xəta!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Lazım olan `%s' görüntüsü tapıla bilmir."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Avtomatik Qurulum Quraşdırıcısı"
-
-#: standalone/drakautoinst:42
-#, fuzzy, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"Avtomatik qurulum disketi yaradmaq üzrəsiniz. Bu xüsusiyyət biraz "
-"təhlükəlidir və diqqətlə istifadə edilməlidir.\n"
-"\n"
-"Bu xüsusiyyətlə, siz, daha əvvəl həyata keçirmiş olduğunuz qurulumun "
-"eynisini təkrarlaya bilərsiniz.\n"
-"\n"
-"Maksimal təhlükəsizlik səbəbi ilə, bolmələmə və şəkilləndirmə sistemi "
-"qurarkən necə qurğuladığınıza baxmayaraq qətiyyən təkrarlanmayacaq.\n"
-"\n"
-"Davam etmək istəyirsiniz?"
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "təkrarla"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "əllə"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Avtomatik Addımların Quraşdırılması"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Xahiş edirik, addımın təkrarlanmasını ya da əllə yenidən seçilməsini hər "
-"addım üçün ayrı ayrı seçin"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Avtomatik qurulum disketi yaradılır"
-
-#: standalone/drakautoinst:90
-#, fuzzy, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "%s sürücüsünə boş bir disket yerləşdirin"
-
-#: standalone/drakautoinst:91
-#, fuzzy, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Avtomatik qurulum disketi yaradılır"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Xoş Gəldiniz.\n"
-"\n"
-"Avtomatik qurulumun parametrləri soldakı qisimlərdə mövcuddur"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Təbriklər!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disket müvəffəqiyyətlə yaradıldı.\n"
-"İndi qurulumunuzu təkrarlaya bilərsiniz."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Avtomatik Qurulum"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Üzv əlavə et"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Son üzvü sil"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"Expect, TCL skript dili üçün bir uzantıdır və istifadəçi müdaxiləsi olmadan "
-"interaktiv iclasları mümkün qılır."
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "Bu sistem üçün şifrəni drakbackup qurğularında qeyd et."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"Çox iclaslı CD üçün yalnız birinci iclas cdrw'ı siləcək. Əks halda cdrw hər "
-"ehtiyatlamadan əvvəl silinir."
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"Bu qurğu dəyişdirilən faylları qeyd edəcək.  Dəqiq davranış ehtiyatların "
-"artan yoxsa diferensial modda olmasında bağlıdır."
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"Artan ehtiyatlar yalnız son ehtiyatlamadan sonra dəyişdirilən və yaranan "
-"faylları qeyd edər."
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Diferensial ehtiyatlamar yalnız oricinal 'əsas' ehtiyatlamadan sonra "
-"dəyişdirilən və yaranan faylları qeyd edər."
-
-#: standalone/drakbackup:159
-#, fuzzy, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"Bu, yerli istifadəçilərin ya da ehtiyatlama nəticələrinin yollanacağı epoçt "
-"ünvanlarının vergüllə ayrılmış siyahısıdır. Sisteminizdə fəal olan poçt "
-"yollama proqramı qurulu olmalıdır."
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"Cərgə ağacının ən üstündəki .backupignore faylında yer alan fayllar "
-"wildcard'ların ya da faylların ehtiyat nüsxəsi alınmayacaq."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"Başqa mediyalara ehtiyatlamada, fayllar sabit diskdə yaradılıb, daha sonra "
-"başqa mediyalara daşınır. Bu seçimi fəallaşdıraraq, ehtiyatlama sonrası "
-"sabit diskdəki faylların silinməsinə imkan verir."
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"rsync kimi bə'zi protokollar verici tərəfində quraşdırılmalıdır.  Cərgə "
-"cığırını işlətmək yerinə, xidmət cığırı üçün 'modul' adını işlətməlisiniz."
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"Xüsusi, sizə öz gün və vaxtınızı seçmə imkanı verir.  Diqər seçimlər /etc/"
-"crontab faylındakı icra hissələrini işlədir."
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Cron normal istifadəçi modu üçün mövcud deyil"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr "Hökmlü istifadəçi siyahısı dəyişdirilib, qurğu faylı yenidən yazılır."
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "Köhnə istifadəçi siyahısı:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "Yeni istifadəçi siyahısı:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      DrakBackup Raportu \n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      DrakBackup Demon Raportu\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Raportu Təfərruatları\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Ümumi irəliləmə"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s mövcuddur, silinsin?\n"
-"\n"
-"Bu gedişatı əvvəlcə də etmişsinizdə güman ki\n"
-" vericidəki authorized_keys-dən girişi təmizləməlisiniz."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Açarların yaradılması biraz vaxt ala bilər."
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "%s törədilə bilmir."
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "%s üstündəki %s qapısında şifrə soruşulmasın"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "%s üstündə xətalı şifrə"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "%s %s'ə daşınırkən icazə verilmədi"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "%s, %s üstündə tapıla bilmir"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s cavab vermir"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"Daşıma müvəffəqiyyətlə başa çatdı\n"
-"İndi aşağıdakı əmrlə vericiyə daxil olmayı yoxlaya bilərsiniz:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"Sizdən şifrə istənilməyəcək."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "Sürücüdə CDR/DVDR yoxdur!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Bu yazıla bilən mediyaya oxşamır!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Silinə bilən mediya yoxdur!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Mediyanı silmək bir az vaxt ala bilər."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "CD'yə yetişmədə səlahiyyət problemi."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "%s içində kaset yoxdur!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Sistem fayllarının ehtiyat nüsxəsini çıxart..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Sabit Disk Ehtiyat Nüsxəsi faylları..."
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "İstifadəçi fayllarının ehtiyat nüsxəsini çıxart..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Diqər Faylların Ehtiyat Nüsxəsini Al..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Sabit Disk Ehtiyatlaması Fəaliyyətdədir..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Ehtiyat nüsxəsini dəyişdirmə!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"%s vasitəsi ilə Drakbackup fəaliyyətləri:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"FTP bağlantı problemi. Ehtiyat nüsxəsi fayllarınız FTP ilə göndərilə "
-"bilmədi.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-"Fayl FTP ilə göndərilirkən xəta yarandı. Xahiş edirik, FTP qurğularınızı "
-"düzəldin."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "FTP tərəfindən göndərilən fayl siyahısı: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"CD üstündə Drakbackup fəaliyyətləri :\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Kaset vasitəsi ilə Drakbackup fəaliyyətləri:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, fuzzy, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-"sendmail bacarılmadı.\n"
-"  Raport məktubunuz göndərilmədi.\n"
-"  Xahiş edirik, sendmail'i quraşdırın"
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr "Poçt göndərilərkən xəta oldu.\n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Kataloq yaradıla bilmir!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Xahiş edirik, istədiyiniz bütün seçimləri seçin.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Bu seçim, /etc cərgənizdəki bütün faylların ehtiyat nüsxəsini alıb, geri "
-"yükləyə bilər.\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Sistem fayllarınızın ehtiyat nüsxəsini çıxardın. (/etc cərgəsi)"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-"Artan/Diferensial Ehtiyatları İşlət  (köhnə ehtiyatları qətiyyən əvəz etmə)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Artan Ehtiyatları İşlət"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "Diferensial Ehtiyatları İşlət"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Kritik faylları daxil etmə (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Bu seçim ilə siz /etc cərgənizin hər hansı bir buraxılışını\n"
-" geri ala bilərsiniz."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Xahiş edirik, ehtiyat nüsxəsinə daxil etmək istədiyiniz bütün istifadəçiləri "
-"seçin."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "Səyyahın ara yaddaşını daxil etmə"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Fayl ya da cərgələri seçib, 'Oldu' düyməsinə basın"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Seçiləni Sil"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "İstifadəçilər"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Ehtiyat nüsxəsi almaq üçün şəbəkə bağlantısını işlət"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Şəbəkə Yöntəmi:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "SSH üçün Expect işlət"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "SSH üçün ehtiyat açarları yarat/transfer et"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "İndi Transfer Et"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Diqər (drackbackup xarici) açarlar onsuzda yerindədir"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Qovşaq adı ya da IP."
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr "Ehtiyatları bu qovşağa qoylmaq üçün cərgə (ya da modul)"
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Bu şifrəni yadında saxla"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Qovşaq adı, istifadəçi adı və şifrəyə ehtiyac var!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Ehtiyatlama üçün CD/DVDROM işlət"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "CD/DVD avadanlığınızı seçin"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "CD/DVD mediyanızın böyüklüyünü seçin"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "Çox iclaslı CD"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "CDRW mediyası"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "RW mediyanızı silin (1ci İclas)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " İndi Sil"
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "DVD+RW mediyası"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "DVD-R mediyası"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "DVDRAM avadanlığı"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "CD avadanlığı tə'yin edilməyib!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Ehtiyat nüsxəsi üçün kaset işlət"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Ehtiyatlama üçün istifadə ediləcək avadanlıq adı"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Ehtiyat nüsxəsini aldıqdan sonra kasedi geri sarma"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Ehtiyat nüsxəsini almadan əvvəl kasedi sil"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Ehtiyatlama sonrasında kasedi çıxart"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Qeyd cərgəsini daxil edin:"
-
-#: standalone/drakbackup:1948
-#, fuzzy, c-format
-msgid "Directory to save to"
-msgstr "Qeyd cərgəsini daxil edin:"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CD-R / DVD-R"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Sabit Disk / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "hər saat"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "günlük"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "hər həftə"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "hər ay"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "xüsusi"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Yanvars"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Fevral"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Mart"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "Aprel"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "May"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "İyun"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "İyul"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Avqust"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Sentyabr"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Oktyabr"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Noyabr"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Dekabr"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Bazar"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Bazar ertəsi"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Çərşənbə axşamı"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Çərşənbə"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Cümə Axşamı"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Cümə"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Şənbə"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Demonu işlət"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Xahiş edirik, hər ehtiyatlama gedişatı arasındakı vaxt aralığını seçin"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "Xüsusi setup/crontab girişi:"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Dəqiqə"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Saat"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Gün"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Ay"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Həftənin Günü"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Xahiş edirik, ehtiyat nüsxəsi çıxardılacaq mediyanı seçin."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Xahiş edirik, cron demonunun xidmətlərinizdə yer aldığından əmin olun."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-"Qeyd edin ki hazırda bütün 'net' mediyaları da eyni zamanda sabit disk "
-"işlədir."
-
-#: standalone/drakbackup:2188
-#, fuzzy, c-format
-msgid "Please choose the compression type"
-msgstr "Xahiş edirik, bərpa ediləcək tarixi seçin:"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr ".backupignore fayllarını işlət"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Hər ehtiyatlamadan sonra bu ünvana məktub göndər:"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "Poçt üçün SMB vericisi:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Diqər mediyaya ehtiyatlamadan sonra Sabit Diskdəki tar fayllrını sil."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Nəyi"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Hara"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Bu zaman"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Əlavə Seçimlər"
-
-#: standalone/drakbackup:2282
-#, fuzzy, c-format
-msgid "Backup destination not configured..."
-msgstr "Şəbəkə fəalliyyəti quraşdırılmayıb"
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup Quraşdırılması"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Xahiş edirik, ehtiyatları saxlamaq istədiyiniz yeri seçin"
-
-#: standalone/drakbackup:2321
-#, fuzzy, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "Diqər mediyaya ehtiyatlamadan sonra Sabit Diskdəki tar fayllrını sil."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "Şəbəkə üstündə"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "CD-R'da"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "Kaset avadanlığı üstündə"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "İstifadəçilərin Ehtiyat Nüsxəsi Al"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (Əsası bütün istifadəçilərdir)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Xahiş edirik, nəyin ehtiyat nüsxəsini çıxartmaq istədiyinizi seçin"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Sistemin ehtiyat nüsxəsini çıxart"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "İstifadəçiləri əllə seç"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Xahiş edirik, ehtiyat nüsxəsi çıxardılacaq mə'lumatı seçin..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Ehtiyat Mənbələri: \n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Sistem Faylları:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- İstifadəçi Faylları:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Başqa Fayllar:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Sabit diskdəki cığıra qeyd et: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tDisk istifadəsinə %s Mb'lıq hədd qoy\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Ehtiyatlamadan sonra sabit diskdəki tar fayllarını sil.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- CD'yə yaz"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " bu avadanlıq üstündə: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (çox-iclaslı)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- %s avadanlığı üstündə kasetə qeyd et"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tSil=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- %s üstündən %s qovşağına qeyd et\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t istifadəçi adı: %s\n"
-"\t\t bu cığırda: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Seçimlər:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tSistem Fayllarını daxil etmə\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tEhtiyatlar tar və bzip2 işlədir\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tEhtiyat nüsxələri tar və gzip işlədir\n"
-
-#: standalone/drakbackup:2518
-#, fuzzy, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tEhtiyat nüsxələri tar və gzip işlədir\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\t.backupignore fayllarını işlət\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\t%s ünvanına poçt göndər\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\t%s SMTP vericisi işlədilir\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Demon, %s bunun vasitəsi ilə:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Sabit disk.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Kaset \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-FTP Şəbəkəsi.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Şəbəkə SSH tərəfindən.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-sync şəbəkəsi.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Quraşdırma yoxdur, xahiş edirik, Sehirbaz ya da Mütəxəssis düymələrinən "
-"birinə basın.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Geri yüklənəcək mə'lumatların siyahısı:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- Sistem Fayllarını Bərpa Et.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - bu tarixdən etibarən: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- İstifadəçi Fayllarını Bərpa Et: \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- Digər Faylları Bərpa Et: \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Pozulmuş data siyahısı:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Xahiş edirik, bir sonrakı dəfə onun işarəsini silin."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Ehtiyat faylları pozulub"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          Bütün seçili mə'lumatlarınız          "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          %s üstündə müvəffəqiyyətlə qeri qaytarıldı       "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "         Qurğuları Geri AL      "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "Diqər fayllar da qeri qaytarılması üçün Oldu."
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Geri yüklənəcək istifadəçi siyahısı (ən yeni tarix vacibdir)"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "Xahiş edirik, bərpa ediləcək tarixi seçin:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Sabit Diskdən Geri Yüklə"
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Ehtiyatların saxlandığı cərgəni daxil edin"
-
-#: standalone/drakbackup:3035
-#, fuzzy, c-format
-msgid "Directory with backups"
-msgstr "Bütün ehtiyat nüsxələri geri yüklə"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Geri qaytarmaq üçün başqa mediya seç"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Başqa Mediya"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Sistemi qeri yüklə"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "İstifadəçiləri Geri Yüklə"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Diqərlərini Geri Yüklə"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "geri yüklənəcək cığırı seçin (/ yerinə)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, fuzzy, c-format
-msgid "Path To Restore To"
-msgstr "Xüsusi Geri Qaytarma"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Geri yükləmədən əvvəl yeni ehtiyatları al (ancaq artan ehtiyatlar üçün.)"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "İstifadəçi cərgələrini ehtiyat nüsxələrini qeri yükləmədən əvvəl sil"
-
-#: standalone/drakbackup:3194
-#, fuzzy, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr "Axtarılacaq fayl adı mətni:"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "Ehtiyatları Axtar"
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "Heç bir nəticə tapıla bilmədi..."
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Seçiləni Qeri Yüklə"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"Seçili Kataloq\n"
-"Girişini Geri Yüklə"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Seçili Faylları Qeri\n"
-"Yüklə"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "%s mövqeyində ehtiyat faylları tapıla bilmədi."
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "CD'dən Geri Yüklə"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Etiketi %s olan CD-ni /mnt/cdrom\n"
-" bağlama nöqtəsi altına sürücüyə yerləşdirin"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Düzgün CD adı deyil. CD-nin adı %s qoyulub."
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Kasetdən Geri Yüklə"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"%2$s kaset avadanlığının içinə etiketi \n"
-"%1$s olan kasedi daxil edin"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Düzgün kaset adı deyil. Kasedin adı %s qoyulub."
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Şəbəkə Üstündən Geri Yüklə"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Şəbəkə Protokolu Üstündən Geri Yüklə: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Qovşaq Adı"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Qovşaq Cığırı ya da Modul"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Şifrə lazımdır"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "İstifadəçi adı məcburidir"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Qovşaq adı məcburidir"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Cığır ya da Modul məcburidir"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "Fayllar Geri Yükləndi..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Geri Yükləmə Bacarılmadı..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "%s alınmadı..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Geri qaytarılacaq faylları axtar"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Bütün ehtiyat nüsxələri geri yüklə"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Xüsusi Geri Qaytarma"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Kataloqdan Geri Yüklə"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Geri yüklənəcək ehtiyat nüsxələri tapıla bilmədi...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "%s çığırının düz olduğunu yoxlayın"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " və CD-nin sürücüdə olduğunu yoxlayın"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-"Ehtiyatlar bağlana bilməyən mediya üstündədir - geri yükləmək üçün Kataloqu "
-"işlət"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "CD yerində - davam et."
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "Yeni geri yükləmə yerinə get."
-
-#: standalone/drakbackup:3825
-#, fuzzy, c-format
-msgid "Directory To Restore From"
-msgstr "CD'dən Geri Yüklə"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "İrəliləməni Geri Yüklə"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Ehtiyatı İnşa Et"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Geri yüklə"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Aşağıdakı paketlər qurulmalıdır:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Xahiş edirik, geri yüklənəcək mə'lumatı seçin..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Sistem fayllarının ehtiyat nüsxəsini çıxart"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "İstifadəçi fayllarının ehtiyat nüsxəsini çıxart"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Diqər faylların ehtiyat nüsxəsini çıxart"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Ümumi İrəliləmə"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "Fayllar FTP ilə göndərilir"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Fayllar göndərilir..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Quraşdırma faylından indi ehtiyat nüsxəsini çıxart"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Ehtiyat Quraşdırılmasını Göstər."
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Sehirbaz Qurğuları"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Ətraflı Quraşdırma"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Qurğuları Göstər"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "Son Qeydi Göstər"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Ehtiyat Nüsxəsini İndi Çıxart"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Quraşdırma faylı tapıla bilmədi \n"
-"Xahiş edirik, Sehirbaz ya da Mütəxəssis düymələrindən birinə basın."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Fayl"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Fayl/_Çıx"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-
-#: standalone/drakboot:127
-#, fuzzy, c-format
-msgid "Do you want to configure it now?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Örtükləri qur"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Qrafiki açılış örtüyü seçimi"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Örtük"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Konsol altında\n"
-"örtüyü göstər"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Yeni örtük yarat"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Əsas istifadəçi"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Əsas masa üstü"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Xeyir, Avtomatik giriş istəmirəm"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Bəli, bu istifadəçi üçün avtomatik giriş istəyirəm (istifadəçi, masa üstü)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Sistem modu"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Sistem açılanda qrafiki ara üzü başlat"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, fuzzy, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Mandriva Linux Xəta Raportlama Vasitəsi"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Mandriva Linux İdarə Mərkəzi"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Sinxronlaşdırma vasitəsi"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Tək Vasitələr"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Onlayn"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Uzaqdan İdarə"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Proqram Təminatı İdarəçisi"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Windows'dan Keçiş vasitəsi"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Quraşdırma Sehirbazları"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr ""
-
-#: standalone/drakbug:82
-#, fuzzy, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"Tə'minat Adı\n"
-"ya da Tam Cığır:"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Paketi Tap"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Paket:"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Çəyirdək:"
-
-#: standalone/drakbug:100
-#, fuzzy, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"Xəta raportu göndərmək üçün, raport düyməsinə basın.\n"
-"This will open  a web browser window on %s\n"
-" where you'll find a form to fill in.  The information displayed above will "
-"be \n"
-"transferred to that server."
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Raport Göndər"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Qurulmayıb"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Paket qurulmayıb"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, fuzzy, c-format
-msgid "not defined"
-msgstr "quraşdırılmayıb"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Vaxt Zolağını Dəyişdir"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Vaxt Zolağı - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Avadanlıq saatınız GMT-yə görə quruludur?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "Şəbəkə Vaxt Protokolu"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Şəbəkə Vaxt Protokolunu Fəallaşdır"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Verici:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Sıfırla"
-
-#: standalone/drakclock:224
-#, fuzzy, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr "%s paketi qurulmalıdır. Qurmaq istəyirsiniz?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Şəbəkə quraşdırılması (%d adapter)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Şəbəkə Keçidi:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Ara üz:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Xahiş edirik, gözləyin"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Ara üz"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Vəziyyət"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Ev sahibi adı: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Qovşaq adını quraşdır..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "Yerli Şəbəkə (lAN) quraşdırılması"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Yerli Şəbəkəni Quraşdır..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Tədbiq Et"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Bağlantıları idarə et"
-
-#: standalone/drakconnect:225
-#, fuzzy, c-format
-msgid "Device selected"
-msgstr "Seçiləni Sil"
-
-#: standalone/drakconnect:307
-#, fuzzy, c-format
-msgid "IP configuration"
-msgstr "CUPS quraşdırılması"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "DNS vericiləri"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Axtarış Sahəsi"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "statik"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Flow idarəsi"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Sətir sonlandırılması"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Modem vaxt dolması"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Qıfıl faylını işlət"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Zəng vurmadan əvvəl ton səsini gözləyin"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "Məşğul gözləməsi"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "Modem səsi"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Fəallaşdır"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Qeyri-fəallaşdır"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Mediya sinifi"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Modul adı"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "Mac Ünvanı"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Yol"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Yol üstündə mövqe"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Sisteminizdə şəbəkə kartı tapıla bilməyib.Avadanlığı quran vasitəni işə "
-"salın."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Şəbəkə ara üzünü sil"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Silinəcək şəbəkə ara üzünü seç:"
-
-#: standalone/drakconnect:751
-#, fuzzy, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Şəbəkənin yenidən başladılması sırasında xəta oldu: \n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "Təbriklər, \"%s\" şəbəkə ara üzü müvəffəqiyyətlə silindi"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "IP yoxdur"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Maskasız"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "yuxarı"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "aşağı"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Bağlandı"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Bağlı deyil"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Bağlantını Kəs..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Bağlan..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Diqqət, başqa internet bağlantısı aşkar edildi, güman ki şəbəkənizi istifadə "
-"edir"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "İndi qeyri-fəallaşdır"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "İndi fəallaşdır"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Qurulu ara üzünüz yoxdur.\n"
-"Əvvəlcə onları  'Quraşdır'a basaraq qurun"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "Yerli Şəbəkə Quraşdırılması"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s Adapteri: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Açılış Protokolu"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Açılışda başladılır"
-
-#: standalone/drakconnect:954
-#, fuzzy, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"BU ara üz hələlik quraşdırılmayıb.\n"
-"Ana pəncərədə quraşdırma sehirbazını işə salın"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, fuzzy, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"BU ara üz hələlik quraşdırılmayıb.\n"
-"Ana pəncərədə quraşdırma sehirbazını işə salın"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, fuzzy, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Şəbəkə ara üzünü sil"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "İnternet bağlantısının quraşdırılması"
-
-#: standalone/drakconnect:1035
-#, fuzzy, c-format
-msgid "Third DNS server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya görə)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "İnternet Bağlantısı Quraşdırılması"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "İnternet yetişməsi"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Bağlantı növü:"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Vəziyyət:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, fuzzy, c-format
-msgid "XDM (X Display Manager)"
-msgstr "Displey idarəçisi seçilir"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Displey idarəçisi seçilir"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 Displey İdarəçisi sizə, X Pəncərə sistemi fəal olan bir sistemə\n"
-"qrafiki olaraq giriş etmə və birdən çox X iclasını eyni anda işlətmə\n"
-"imkanı verir."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Dəyişikliklər həyata keçirildi, dm xidməti yenidən başladılsın ?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "Açılış disketi yaradılması"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Ümumi"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Avadanlıq"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Çəyirdək buraxılışı"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Qurğular"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Ətraflı qurğularr"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Böyüklük"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Mkinitrd arzuya bağlı olan arqumentləri"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "zorla"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "raid modulları keç"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "lazım olarsa"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "scsi modulları keç"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Modul əlavə et"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Modulu sil"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "%s avadanlığında medya olduğundan əmin olun"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Mediya yoxdur, ya da %s avadanlığına yazmaya qarşı qorumalıdır.\n"
-"Xahiş edirik, birini taxın."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Fork edilə bilmir: %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Disket yaradılması tamamlandı"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "Açılış disketi yaradılması müvəffəqiyyətlə başa çatdı \n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"mkbootdisk düzgün bağlana bilmədi:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Qurulu yazı növlərini axtar"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Qurulu olan yazı növlərini seçmə"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "bütün yazı növlərini oxu"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "Heç bir yazı növü tapılmadı"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "qurtardı"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "Bağlanmış bölmələrinizdə heç bir yazı növü tapıla bilmədi"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Düzgün yazı növlərini yenidən seç"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "Heç bir yazı növü tapılmadı.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Qurulanlar siyahısında yazı növlərini axtar"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "%s yazı növləri dönüşdürülməsi"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Yazı növləri köçürülməsi"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "True Type yazı növlərinin qurulumu"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "ttmkfdir fəaliyyətdədir, xahiş edirik, gözləyin..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "True Type qurulumu bitdi"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "type1inst inşa edilir"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript əsaslanması"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Müvəqqəti Faylları Gizlət"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "XFS-ni yenidən başlat"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Yazı Növlərinin Fayllarını Gizlət"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "xfs restart"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Yazı növlərini normal yolla qura bilərsiniz. Çox nadir də olsa, saxta və "
-"qondarma yazı növləri\n"
-"X Vericinizi dondura bilər. Bu vəziyyətdə, Ctrl+Alt+Backspace düymələrinə "
-"eyni anda basın."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Yazı Növü Siyahısı"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Haqqında"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Sil"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "İdxal Et"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"Müəllif Hüququ (C) 2001-2002 Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (orijinal buraxılış)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, fuzzy, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Yazı növlərini dəstəkləyəcək proqramları seçin:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Yazı növlərini normal yolla qura bilərsiniz. Çox nadir də olsa, saxta və "
-"qondarma yazı növləri\n"
-"X Vericinizi dondura bilər. Bu vəziyyətdə, Ctrl+Alt+Backspace düymələrinə "
-"eyni anda basın."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Ümumi Çapçılar"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Yazı növü faylını ya da cərgəsini seçin və 'Əlavə Et' düyməsinə basın"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Fayl Seçkisi"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Yazı növlərini idxal et"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Yazı növlərini qur"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "əminsəniz buraya basın."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "yoxdursa, burada."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Seçili olmayan hamısını"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Hamısı Seçildi"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Siyahını Sil"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "Yazı növləri idxal edilir"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Başlanğıc sınamaları"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Siseminizdəki yazı növlərini köçürdün"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Yazı növlərini qur və çevir"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Qurulum Sonrası"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Siseminizdəki yazı növlərini silin"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Silmə Sonrası"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Bağışlayın, biz ancaq 2.4 və üstü çəyirdəklərini dəstəkləyirik."
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi hazirda qeyri-fəaldır"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi quraşdırılması onsuzda edilib.\n"
-"Hazırda qeyri-fəaldır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "fəallaşdır"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "yenidən quraşdır"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "keç"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Vericilər fəallaşdırılır..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi açıldı"
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi fəallaşdırıldı"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq fəallaşdırılmışdır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "passivləşdir"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Vericilər bağlanır..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi bağlandı"
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
-"Bu seçimlələ yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
-"bağlantınızdan faydalana biləcək.\n"
-"\n"
-"İrəli getmədən əvvəl drakconnect işlədərək Şəbəkə/İnternet bağlantınızı "
-"quraşdırdığınızdan əmin olun.\n"
-"\n"
-"Qeyd: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə ehtiyacınız var."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ara Üz %s (%s modulu işlədilir)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Ara üz %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Siseminizdə şəbəkə adapteri yoxdur!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Şəbəkə ara üzü"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sistemnizdə bir dənə qurulmuş şəbəkə adapteri var:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerli Şəbəkə adapterinizi qurmaq üzərəyəm?"
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Şəbəkə ara üzünü seçin"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Xahiş edirik, Yerli Sahə Şəbəkənizə (LAN) bağlanacaq şəbəkə avadanlığını "
-"seçin."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Şəbəkə ara üzü onsuzda quraşdırılıb"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Diqqət, (%s) şəbəkə avadanlığı onsuzda quraşdırılıb.\n"
-"\n"
-"Onun avtomatik yenidən quraşdırılmasını istəyirsiniz?\n"
-"\n"
-"Bunu əllə də edə bilərsiniz, yalnız nə etdiyinizi bilməlisiniz."
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Avtomatik yenidən quraşdırma"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "Xeyir (ancaq mütəxəssislər)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Hazırkı ara üz qurğusunu göstər"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Hazırkı ara üz qurğusu"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"`%s' hazırkı qurğuları:\n"
-"\n"
-"Şəbəkə: %s\n"
-"IP ünvanı: %s\n"
-"IP atrubutlaması: %s\n"
-"Sürücü: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Hazırkı qurğularınızı saxlayıb DHCP vericisini qurduğunuzu qəbul edə "
-"bilərəm; bu halda yerli şəbəkəniz üçün işlətdiyiniz Şəbəkəni düz oxumağıma "
-"yardım edin; Onu yenidən quraşdırmayacam və DHCP vericinizə əl dəyməyəcəm.\n"
-"\n"
-"Əsas DNS girişi atəş divarı üstündə quraşdırılmış Ön Yaddaşlayıcı Ad "
-"Vericisidir. Onu, misal üçün ISP DNS IP-nizlə əvəz edə bilərsiniz.\n"
-"\t\t      \n"
-"Əks halda, ara üzünüzü və DHCP vericinizi sizin üçün (yenidən) quraşdıra "
-"bilərəm. \n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Yerli Şəbəkə ünvanı"
-
-#: standalone/drakgw:323
-#, fuzzy, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"DHCP Verici Quraşdırılması.\n"
-"\n"
-"Burada, DHCP verici quraşdırılması üçün fərqli seçimləri seçə bilərsiniz.\n"
-"Əgər bir seçimin mə'nasını bilmirsinizsə, onu olduğu kimi saxlayın.\n"
-"\n"
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Bu) DHCP Verici IP'si"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "DNS Verici IP'si"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Daxili domen adı"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "The DHCP başlama aralığı"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "DHCP son silsiləsi"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Əsas icarə (saniyə olaraq)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maksimal icarə (saniyə olaraq)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ara üz və DHCP vericisini yenidən quğula"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Yerli Şəbəkə `.0' ilə bitmədi, zəminə buraxılır."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Hazırkı %s quğusunda bir LAN ünvan toqquşması tapıldı!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Quraşdırılır..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Skriptlə qurulur, proqram tə'minatı qurulur, xidmətlər başladılır..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi qurulurkən xəta oldu"
-
-#: standalone/drakgw:598
-#, fuzzy, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Hər şey quruldu.\n"
-"İndi isə İnternet bağlantınızı yerli şəbəkədəkı başqa kompüterlər ilə "
-"bölüşdürə bilərsiniz, bunun üçün isə avtomatik şəbəkə quraşdırılması (DHCP) "
-"işlədilir."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"Müəllif Hüququ (C) 2003-2005 Mandriva.\n"
-"Bu sərbəst tə'minatdır və yalnız GNU GPL qaydaları altında paylana bilər.\n"
-"\n"
-"İstifadə qaydası: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - bu yardımı göstər     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_etiketi>       - id_label'a istiqamətləndirən html yardım "
-"səhifəsini yüklə\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-" --doc <körpü>       - başqa bir veb səhifəsinə körpü (WM xoş gəldin ara üzü "
-"üçün)\n"
-
-#: standalone/drakhelp:36
-#, fuzzy, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Mandriva Linux İdarə Mərkəzi"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"%s göstərilə bilmir \n"
-". Bu növ üçün Yardım girişi yoxdur\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Sistem qurğuları"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Xüsusi qurğular"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Xüsusi və sistem qurğuları"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Dəyişdirilə bilən"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Cığır"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "İstifadəçi"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Qrup"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Səlahiyyətlər"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Hazırkı qaydanı düzəlt"
-
-#: standalone/drakperm:107
-#, fuzzy, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Drakperm, msec ilə səlahiyyətləri, qrupları və yiyələri düzəltmək üçün, "
-"lazım olan faylları görmək üçün işlədilir.\n"
-"Əsas qaydaların üstündən qeyd edərək öz qaydalarınızı yarada bilərsiniz."
-
-#: standalone/drakperm:110
-#, fuzzy, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"Hazırkı təhlükəsizlik səviyyəsi: %s\n"
-"Görmək/dəyişdirmək istədiyiniz səlahiyyətləri seçin"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Yuxarı"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Seçili qaydanı bir səviyyə üstə daşı"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Aşağı"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Seçili qaydanı bir səviyyə aşağı daşı"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Qayda əlavə et"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Sonuna yeni qayda əlavə et"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Seçili qaydanı sil"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Düzəlt"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "gəz"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "klanc"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "qrup"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "digər"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Oxu"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "Faylı oxumaq üçün \"%s\"i fəallaşdır"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Yaz"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "Faylı yazmaq üçün \"%s\"ı fəallaşdır"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "İcra Et"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Faylı icra etmək üçün \"%s\"ı fəallaşdır"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Cərgə üçün istifadə edilən:\n"
-" yalnız cərgə yiyəsi ya da cərgə içindəki fayl onu silə bilər"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "İcra üçün yiyə id'sini işlət"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "İcra üçün qrup id'sini işlət"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "İstifadəçi :"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Qrup :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Hazırkı istifadəçi"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "Seçilidirsə, yiyə və qrup dayişdirilməyəcək"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Cığır seçkisi"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Xassə"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "PXE Vericisi Quraşdırılması"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Qurulum Şəbəkəsi Quraşdırılması"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Kompüterınızə DHCP vericisi olaraq PXE vericisini və onu qurulim vericisi \n"
-"etmək üçün ona TFTP qurmaq üzərə quraşdıracaqsınız. Bu xassə ilə, \n"
-"Bu xassə ilə yerli şəbəkənizdəki digər kompüterlər bu kompüteri mənbə.\n"
-"olaraq istifadə edərək qurula biləcəklər.\n"
-"\n"
-"Daha irəli getmədən əvvəl Şəbəkə/İnternet yetişmənizin drakconnect ilə "
-"quraşdırıldığına əmin olun.\n"
-"\n"
-"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
-"ehtiyacınız var."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "dhcp vericisi üçün hansı şəbəkə ara üzünün istifadə ediləcəyini seçin."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Ara Üz %s (%s şəbəkəsində)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP vericisi, başqa kompüterə, verilən ünvan aralıqlarında PXE "
-"işlədərəkaçılış etmə imkanı verəcək.\n"
-"\n"
-"Şəbəkə ünvanı %s , işlədilən netmask isə %s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP başlama ip'si"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP sonlanma ip'si"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Xahiş edirik, qurulum görüntüsünün harda mövcud olacağını göstərin.\n"
-"\n"
-"Əgər mövcud cərgəniz yoxdursa, xahiş edirik, CD ya da DVD məzmununuköçürün.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Qurulum əksinin cərgəsi"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Rəsm tapıla bilmədi"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Heç bir CD ya da DVD görünüşü tapıla bilmədi, xahiş edirik, qurulum "
-"proqramını və rpm fayllarını köçürün."
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Xahiş edirik, auto_install.cfg faylının yerini bildirin.\n"
-"\n"
-"Avtomatik qurma modunu quğulamaq istəmirsinizsə buranı boş buraxın.\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "auto_install.cfg faylının yeri"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Mod"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Kanal"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr "Açarla"
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Şəbəkə:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Mod:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Enkripsiya:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Siqnal:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "bağlı"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Bağlan"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Yenidən dara"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Vəziyyət"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Bağlantını kəs"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Yenilə"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "açıq"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "HAMISI"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "YERLİ"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Nəzərə alma"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, fuzzy, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"Burada siz, sisteminizin təhlükəsizlik səviyyəsini və idarəsini quraşdıra "
-"bilərsiniz.\n"
-"\n"
-"\n"
-"'Təhlükəsizlik Xəbərdarlıqları' seçimi seçilidirsə Təhlükəsizlik İdarəçisi "
-"təhlükəsizlik\n"
-"xəbərdarlıqlarını alacaq. Təhlükəsizlik İdarəçisi bir istifadəçi adı ya da "
-"ePoçt ola bilər.\n"
-"\n"
-"\n"
-"Təhlükəsizlik Səviyyəsi menyusu əvvəlcədən quraşdırılmış 6 təhlükəsizlik "
-"səviyyəsi \n"
-"arasından birisini seçmə imkanı verir. \n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Zəif</span>: Tamamilə e'tibarsız yalnız\n"
-"işlədilməsi çox asan təhlükəsizlik səviyyəsidir. Bu səviyyə yalnız heç bir\n"
-"şəbəkəyə ya da internetə bağlı olmayan və hərkəs tərəfində yetişilə "
-"bilməyən\n"
-"kompüterlər üçün seçilə bilər.\n"
-"\n"
-"<span foreground=\"royalblue3\">Standart</span>: Bu internetə alıcı \n"
-"olaraq bağlanacaq bir kompüter üçün standart təhlükəsizlik səviyyəsidir.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Yüksək</span>: Bə'zi məhdudiyyətlər\n"
-"olacaq və hər gecə daha çox avtomatik yoxlama işə salınacaq.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Daha Yüksək</span>: Birdən çox\n"
-"alıcıdan bağlantıları qəbul edən bir verici üçün bu təhlükəsizlik səviyyəsi\n"
-"qəbul edilə bilər. Əgər sisteminiz internet üstündə yalnız bir alıcıdırsa\n"
-" daha alçaq səviyyə seçin.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: Bu, bir əvvəlki \n"
-"səviyyəyə oxşayır yalnız sistem tamamilə bağlıdır və təhlükəsizlik\n"
-"xassələri maksimal vəziyyətdədir."
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Sahələrin izahatı:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(əsas qiymət: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Təhlükəsizlik Səviyyəsi:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Təhlükəsizlik İdarəçisi:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Bəsit seçimlər:"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Şəbəkə Seçimləri"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Sistem Seçimləri"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Peryodik Yoxlamalar"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Xahiş edirik, gözləyin, təhlükəsizlik səviyyəsi seçilir..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Xahiş edirik, gözləyin təhlükəsizlik seçimləri tə'yin edilir..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Səs Kartı Təsbit Edilmədi!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Sisteminizdə səs kartı aşkar edilməyib. Xahiş edirik, Linuks dəstəkli səs "
-"kartının düzgün taxıldığını yoxlayın.\n"
-"\n"
-"\n"
-"Avadanlıq mə'lumat bazamızı bu ünvanda ziyarət edə bilərisiniz:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Qeyd: əgər İSA PnP səs kartınız varsa, sndconfig proqramınıişlətməlisiniz.  "
-"Sadəcə olaraq konsolda \"sndconfig\" əmrini icra edin."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"Quraşdırmanı tamamlamaq üçün 'ImageMagick' paketi məcburidir.\n"
-"'ImageMagick' paketini qurmaq üçün \"Oldu\", ləğv etmək üçün \"Ləğv Et\" "
-"düyməsinə basın"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"mətn qutusunun hərf\n"
-"ədədində x mövqeyi"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"hərf ədədi olaraq mətn\n"
-"qutusunun y istiqaməti"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "mətn eni"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "mətn qutusunun hündürlüyü"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"irəliləmə çubuğunun onun sol üst\n"
-"küncünə görə x mövqeyi"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"irəliləmə çubuğunun onun sol üst\n"
-"küncünə görə y mövqeyi"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "İrəliləmə çubuğunun eni"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "İrəliləmə çubuğunun hündürlüyü"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Konsolda loqonu göstər"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Örtük adı"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "son həlledilirlik"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "Örtüyü qeyd et"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "Açılış örtüyü qeyd edilir..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "rəsmi seçin"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "İrəliləmə çubuğu rəng seçkisi"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, fuzzy, c-format
-msgid "Add an UPS device"
-msgstr "Üzv əlavə et"
-
-#: standalone/drakups:83
-#, fuzzy, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Poçt quraşdırma vasitəsinə xoş gəldiniz.\n"
-"\n"
-"Burada, siz xəbər vermə sistemini quraşdıra bilərsiniz.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, fuzzy, c-format
-msgid "Autodetection"
-msgstr "Avtomatik təsbit et"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Təsbit etmə fəaliyyətdədir"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Təbriklər"
-
-#: standalone/drakups:121
-#, fuzzy, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "Sehirbaz müvəffəqiyyətlə poçt bildirişini qeyri-fəallaşdırdı."
-
-#: standalone/drakups:123
-#, fuzzy, c-format
-msgid "No new UPS devices was found"
-msgstr "Heç bir avadanlıq tapıla bilmədi"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, fuzzy, c-format
-msgid "UPS driver configuration"
-msgstr "CUPS çapçı qurğuları"
-
-#: standalone/drakups:128
-#, fuzzy, c-format
-msgid "Please select your UPS model."
-msgstr "Xahiş edirik, siçanınızı sınayın:"
-
-#: standalone/drakups:129
-#, fuzzy, c-format
-msgid "Manufacturer / Model:"
-msgstr "Çapçı e'malatçısı, model"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Ad:"
-
-#: standalone/drakups:145
-#, fuzzy, c-format
-msgid "The name of your ups"
-msgstr "CPU adı"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Qapı:"
-
-#: standalone/drakups:149
-#, fuzzy, c-format
-msgid "The port on which is connected your ups"
-msgstr "siçanınızın bağlı olduğu yol növü"
-
-#: standalone/drakups:159
-#, fuzzy, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "Sehirbaz poçt xəbərdarlıq sistemini müvəffəqiyyətlə quraşdırdı."
-
-#: standalone/drakups:250
-#, fuzzy, c-format
-msgid "UPS devices"
-msgstr "Xidmətlər"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Ad"
-
-#: standalone/drakups:269
-#, fuzzy, c-format
-msgid "UPS users"
-msgstr "İstifadəçilər"
-
-#: standalone/drakups:285
-#, fuzzy, c-format
-msgid "Access Control Lists"
-msgstr "şəbəkə vasitələrinə yetişmə"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr ""
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Qaydalar"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Gedişat"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Səviyyə"
-
-#: standalone/drakups:299
-#, fuzzy, c-format
-msgid "ACL name"
-msgstr "LVM adı?"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, fuzzy, c-format
-msgid "DrakUPS"
-msgstr "DrakVPN"
-
-#: standalone/drakups:339
-#, fuzzy, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Qurğuların sınağı"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "VPN bağlantısı fəaldır."
-
-#: standalone/drakvpn:96
-#, fuzzy, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"Və artıq fəallaşdırılmışdır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "VPN bağlanır..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "VPN bağlantısı indi qeyri-fəallaşdırıldı."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "VPN bağlantısı hazırda qeyri-fəaldır."
-
-#: standalone/drakvpn:122
-#, fuzzy, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi quraşdırılması onsuzda edilib.\n"
-"Hazırda qeyri-fəaldır.\n"
-"\n"
-"Nə etmək istəyirsiniz?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "VPN fəallaşdırılır..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "VPN bağlantısı indi fəallaşdırıldı."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "Sadə VPN qurğusu."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Çəyirdək modulu."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Təhlükəsizlik Siyasətləri"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "IKE daemon racoon"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Quraşdırma faylı"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s giriş"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Göstər"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Göndər"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Quraşdırılması göstər"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "ipsec.conf girişləri"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "qurğu"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "normal conn"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Mövcuddur !"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "ara üzlər"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsdebug"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "plutodebug"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "plutoload"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "plutostart"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "uniqueids"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-
-#: standalone/drakvpn:451
-#, fuzzy, c-format
-msgid "PFS"
-msgstr "HFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "sol"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "seçkinin adı"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "avtomatik"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "sağ"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "sağmərkəz"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Qismi dəyişdir"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Qisim adları"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "Dəyişdirilə bilmir!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Qismi sil"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "racoonf.conf girişləri"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "cığır"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "uzaq"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "cığır növü"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "əsl fayl"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "path_type"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr ""
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#: standalone/drakvpn:941
-#, fuzzy, c-format
-msgid "Sainfo source protocol"
-msgstr "Avrupa protokolu"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr ""
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, fuzzy, c-format
-msgid "Sainfo destination protocol"
-msgstr "Windows'dan Keçiş vasitəsi"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "PFS qrupu"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "Lifetime nömrəsi"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "Lifetime bölməsi"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "Tanıtma alqorifması"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "Sıxışdırma alqorifması"
-
-#: standalone/drakvpn:1036
-#, fuzzy, c-format
-msgid "deflate"
-msgstr "əsas"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Uzaq"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, fuzzy, c-format
-msgid "Exchange mode"
-msgstr "Yığma modu"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, fuzzy, c-format
-msgid "Generate policy"
-msgstr "Təhlükəsizlik"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, fuzzy, c-format
-msgid "Passive"
-msgstr "Filistin"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr ""
-
-#: standalone/drakvpn:1083
-#, fuzzy, c-format
-msgid "My certfile"
-msgstr "Fayl seç"
-
-#: standalone/drakvpn:1084
-#, fuzzy, c-format
-msgid "Name of the certificate"
-msgstr "Çapçı adı"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr ""
-
-#: standalone/drakvpn:1086
-#, fuzzy, c-format
-msgid "Name of the private key"
-msgstr "Çapçı adı"
-
-#: standalone/drakvpn:1087
-#, fuzzy, c-format
-msgid "Peers certfile"
-msgstr "Fayl seç"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr ""
-
-#: standalone/drakvpn:1089
-#, fuzzy, c-format
-msgid "Verify cert"
-msgstr "çox ə'la"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr ""
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, fuzzy, c-format
-msgid "Peers identifier"
-msgstr "Çapçı"
-
-#: standalone/drakvpn:1115
-#, fuzzy, c-format
-msgid "Proposal"
-msgstr "Protokol"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "Hash alqorifması"
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "DH qrupu"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Əmr"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "Mənbə IP aralığı"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "Hədəf IP aralığı"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "Üst-lay protokolu"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "any"
-msgstr "Gün"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Bayraq"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "İstiqamət"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "IPsec siyasəti"
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "ipsec"
-msgstr "Msec"
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "discard"
-msgstr "qeyri-fəal"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "tunnel"
-msgstr "Kanal"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "transport"
-msgstr "ötürülüb"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Mənbə/Hədəf"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "əsas"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "use"
-msgstr "Siçan"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "unique"
-msgstr "uniqueids"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "ABŞ (translasiya)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "ABŞ (kabel)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (kabel-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Yaponiya (translyasiya)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Yaponiya (kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "Çin (translasiya)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Qərvi Avropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Şərqi Avropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Fransızca [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Yeni Zellanda"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Avstraliya Optus kabel Televiziyası"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Xahiş edirik,\n"
-"televiziya normunuzu və ölkənizi girin"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "TV normu:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Sahə:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "TV kanallarının axtarışı fəaliyyətdədir..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "Televiziya kanalları axtarılır"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Televiziya kanalları axtarılarkən xəta yarandı"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Sağolun, sağlıqla qalın!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "İndi, siz xawtv-ni işə sala bilərsiniz (X Window altında!) !\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Televiziya Kartı Təsbit Edilmədi!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Sisteminizdə heç bit Televiziya Kartı aşkar edilmədi. Xahiş edirik, Linuks "
-"dəstəkli Televiziya Kartının düzgün taxıldığını yoxlayın.\n"
-"\n"
-"\n"
-"Avadanlıq mə'lumat bazamızı bu ünvandan ziyarət edə bilərsiniz:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Alternativ sürücülər"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "bu səs kartı üçün alternativ sürücülərin siyahısı"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "bu, avadanlığın taxılı olduğu fiziki yoldur (mis: PCİ, USB, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Yol tanıtması"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- PCİ və USB davadanlıqları: bu e'malatçı, avadanlıq, alt  e'malatçı və alt "
-"avadanlıq PCİ/USB id'lərini göstərir"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- pci avadanlıqları: bu kartın PCİ yuvasını, avadanlığını və funksiyasını "
-"verir\n"
-"- eide avadanlıqları: avadanlıq ya master ya da slave vəziyyətindədir\n"
-"- scsi avadanlıqları: scsi bus və scsi avadanlıq id'ləri"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "Sürücü həcmi"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "sürücünün xüsusi bacarıqları (yazma bacarığı və/ya da DVD dəstəyi)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "burada avadanlığın izahatı yer alır"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Köhnə avadanlıq faylı"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "dev paketində işlədilən köhnə sabit avadanlıq adı"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Yeni devfs avadanlığı"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "əsas çəyirdək devfs tərəfindən yaradılan yeni dinamik avadanlıq adı"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Modul"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "bu avadanlığı işlədən GNU/Linuks çəyirdək modulu"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "Extended partitions"
-msgstr "Yeni bölmə yarat"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "the number of extended partitions"
-msgstr "işlədicinin nömrəsi"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Həndəsə"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, fuzzy, c-format
-msgid "Disk controller"
-msgstr "SMBus idarəçiləri"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "avadanlığın sinifi"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Model"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "sabit disk modeli"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "şəbəkə çapçısı qapısı"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "Primary partitions"
-msgstr "Bölmələrin şəkilləndirilməsi"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "the number of the primary partitions"
-msgstr "işlədicinin nömrəsi"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "avadanlığın e'malatçısı"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, fuzzy, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "bu, avadanlığın taxılı olduğu fiziki yoldur (mis: PCİ, USB, ...)"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device #"
-msgstr "Xidmətlər"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device number"
-msgstr "Lifetime nömrəsi"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, fuzzy, c-format
-msgid "PCI function number"
-msgstr "Bağlantı adı"
-
-#: standalone/harddrake2:57
-#, fuzzy, c-format
-msgid "Vendor ID"
-msgstr "E'malatçı"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "Device ID"
-msgstr "Avadanlıq: "
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "avadanlığın e'malatçısı"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "Sub device ID"
-msgstr "Xidmətlər"
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "avadanlığın e'malatçısı"
-
-#: standalone/harddrake2:61
-#, fuzzy, c-format
-msgid "Device USB ID"
-msgstr "Avadanlıq: "
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Boqomiplər"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"GNU/Linuks çəyirdəyi açılışda dönmə hesablaması yerinə gətirir və onun "
-"nəticələri cpu \"sür'ət yoxlaması\" edə bilmək üçün boqomips olaraq saxlanır."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Ön yaddaş böyüklüyü"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "(ikinci səviyyə) cpu ön yaddaşının (cache) böyüklüyü"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Coma xətası"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "bu cpu'da Cyrix 6x86 Coma xətasının olması"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid ailəsi"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "cpu ailəsi (nüm: i686 sinifi üçün 6)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid səviyyəsi"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "cpuid tə'limatları ilə alına bilən mə'lumat səviyyəsi"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Sıxlıq (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr "MHz olaraq CPU tezliyi"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Bayraqlar"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Çəyirdək tərəfindən raport edilən CPU bayraqları"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv xətası"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"İlk çıxan Pentium sinifi mikrosxemlərdə Floating point DIVision (FDIV) "
-"xətası vardı"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "FPU mövcud isə"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "bəli, işlədicinin arifmetik ko-işlədicisi olduğu mə'nasına gəlir"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "FPU'nun irq vektoruna sahibliyi"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "bəli, arifmetik ko-işlədici estisna vektoruna bağlıdır deməkdir"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "F00f xətası"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr "əvvəlki pentiumlar xətalı idi və F00F bayt kodu açılarkən donurdu"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "Xətanı dayandır"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Bə'zi köhnə i486DX-100 mikrosxemlər \"halt\" əmrindən sonra idarə etmə "
-"moduna düzgün geri dönə bilmirdi"
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "cpu'nun alt nəsli"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "cpu nəsli (mis: Pentium III üçün 8, ...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Model adı"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "cpu'nun rəsmi e'maltçısı"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "CPU adı"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "İşlədici ID'si"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "işlədicinin nömrəsi"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Model addımlaması"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "cpu addımlaması"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "işlədicinin e'malatçısı"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Yazma qoruması"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"Cpu'nun CR0 qeydindəki WP bayrağı yaddaş səhifəsi səviyyəsində yazma "
-"qorumasını məcbur edir, buna görə də işlədiciyə istifadəçi yaddaşına nəzərdə "
-"olmayan yetişməni ləğv etmə imkanı verir. (bu bir xəta qoruyucusudur)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Disket şəkilləndirməsi"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "sürücü tərəfindən dəstəklənən disket şəkli"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EİDE/SCSİ kanalı"
-
-#: standalone/harddrake2:97
-#, fuzzy, c-format
-msgid "Disk identifier"
-msgstr "Çapçı"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, fuzzy, c-format
-msgid "Logical unit number"
-msgstr "Məntiqi həcm adı"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, fuzzy, c-format
-msgid "Installed size"
-msgstr "Sistemin qurulumu"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, fuzzy, c-format
-msgid "Enabled Size"
-msgstr "Fəal"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, fuzzy, c-format
-msgid "type of the memory device"
-msgstr "avadanlığın e'malatçısı"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Sür'ət"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, fuzzy, c-format
-msgid "Bank connections"
-msgstr "Kabel bağlantısı"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, fuzzy, c-format
-msgid "Device file"
-msgstr "Köhnə avadanlıq faylı"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, fuzzy, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "Çərx emulyasiyalı"
-
-#: standalone/harddrake2:116
-#, fuzzy, c-format
-msgid "the type of the mouse"
-msgstr "Xahiş edirik, siçanınızı seçin"
-
-#: standalone/harddrake2:117
-#, fuzzy, c-format
-msgid "the name of the mouse"
-msgstr "CPU adı"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Düymə ədədi"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "siçanın sahib olduğu düymə ədədi"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "siçanınızın bağlı olduğu yol növü"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Kimlik:"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Bağlantı"
-
-#: standalone/harddrake2:137
-#, fuzzy, c-format
-msgid "Performances"
-msgstr "Qurğular"
-
-#: standalone/harddrake2:138
-#, fuzzy, c-format
-msgid "Bugs"
-msgstr "Yol"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Disk bölmələri"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Qabiliyyətlər"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Seçimlər"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Yardım"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Ça_pçıları avtomatik təsbit et"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/_Modemləri avtomatik təsbit et"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/_jaz sürücülərini avtomatik təsbit et"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr "/paralel _zip drayverlərini avtomatik aşkar et"
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/Çı_x"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Sahənin izahatı"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake yardımı"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Avadanlığı seçdiyiniz vaxt, onun mə'lumatını sağ çərçivədəki sahədə "
-"görəcəksiniz."
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Xəta Raportu Göndər"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Haqqında..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Harddrake Haqqında"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, fuzzy, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Bu HardDrake'dir, Mandriva Linux avadanlıq quraşdırma vasitəsi.\n"
-"<span foreground=\"royalblue3\">Buraxılış:</span> %s\n"
-"<span foreground=\"royalblue3\">Müəllif:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, fuzzy, c-format
-msgid "Harddrake2"
-msgstr "HardDrake"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Təsbit edilən avadanlıq"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Modulu quraşdır"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Quraşdırma vasitəsini işə sal"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "na'məlum"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Namə'lum"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Müxtəlif"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Burada mə'lumatlarını görmək istədiyiniz avadanlığı sol tərəfdə seçin."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "ikinci"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "əsas"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "yazıcı"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, fuzzy, c-format
-msgid "Account:"
-msgstr "Bağla"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Şifrə:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Qovşaq adı:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace-in Silmə funksyasını görməyini istəyirmisiniz?"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Dəyişikliklər edildi, ancaq effektiv olmaq üçün yenidən giriş edin"
-
-#: standalone/logdrake:50
-#, fuzzy, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Mandriva Linux Vasitələrinin İzahatı"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Yalnız seçili gününkünü göstər"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Fayl/_Təze"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Fayl/_Aç"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Fayl/_Qeyd Et"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Fayl/_Fərqli Qeyd Et"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Fayl/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Seçimlər/Sınaq"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Yardım/_Haqqında..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Tanıtma"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "İstifadəçi"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "İsmarışlar"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Sistem qeydi"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "axtar"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Qeydlərinizə baxan vasitə"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Qurğular"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "Uyğun gələn"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "amma oxşamır"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Fayl seç"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Təqvim"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Fayl məzmunu"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "Poçtla xəbər vermə"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr ""
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "xahiş edirik gözləyin, fayl oxunur: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Vericisi"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domen Adı Həlledicisi"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "Ftp Vericisi"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix Poçt Vericisi"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Samba Vericisi"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Webmin Xidməti"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd Xidməti"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "Poçt xəbər sistemini quraşdır"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "Poçt xəbərdarlıq sistemini dayandır"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Poçtla xəbər vermə qurğuları"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Poçt quraşdırma vasitəsinə xoş gəldiniz.\n"
-"\n"
-"Burada, siz xəbər vermə sistemini quraşdıra bilərsiniz.\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Nə etmək istəyirsiniz?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Xidmətlər qurğuları"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Seçili xidmətlərdən biri işləməsə sizə xəbər göndəriləcək"
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "Qurğunu yüklə"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Yük bu qiymətdən yüksək olarsa sizə xəbərdarlıq göndəriləcək"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Yüklə"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "Xəbərdarlıq qurğuları"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Xahiş edirik, aşağıya epoçt ünvanınızı daxil edin"
-
-#: standalone/logdrake:431
-#, fuzzy, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-"Çapçılarını işlətmək istədiyiniz qovşağın IP ünvanı və qapısını daxil edin."
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "Sehirbaz poçt xəbərdarlıq sistemini müvəffəqiyyətlə quraşdırdı."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "Sehirbaz müvəffəqiyyətlə poçt bildirişini qeyri-fəallaşdırdı."
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Fərqli qeyd et..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Xahiş edirik, siçanınızın növünü seçin."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "3 düymə emulasiyası"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Siçan sınağı"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Xahiş edirik, siçanınızı sınayın:"
-
-#: standalone/net_applet:45
-#, fuzzy, c-format
-msgid "Network is up on interface %s"
-msgstr "Şəbəkə ara üzü"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, fuzzy, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Şəbəkə fəalliyyəti quraşdırılmayıb"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Bağlan %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "%s bağlantısını kəs"
-
-#: standalone/net_applet:70
-#, fuzzy, c-format
-msgid "Monitor Network"
-msgstr "Şəbəkə Üstündən Geri Yüklə"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Şəbəkəni Quraşdır"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "ara üzlər"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Profiller"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr ""
-
-#: standalone/net_applet:223
-#, fuzzy, c-format
-msgid "Interactive intrusion detection"
-msgstr "İnteraktiv funksiya yaradıcısı"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Həmişə başlanğıcda işə sal"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, fuzzy, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "Bu hadisə dəyişdirilib."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, fuzzy, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Atəş divarı quruluşu tapıldı!"
-
-#: standalone/net_applet:301
-#, fuzzy, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Həqiqətən də bu oyundan çıxmaq istəyirsiniz?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, fuzzy, c-format
-msgid "Attack details"
-msgstr "Təfsilatsız"
-
-#: standalone/net_applet:322
-#, fuzzy, c-format
-msgid "Attack time: %s"
-msgstr "Gedişat: %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Şəbəkə ara üzü: %s"
-
-#: standalone/net_applet:324
-#, fuzzy, c-format
-msgid "Attack type: %s"
-msgstr "Çatma şəkli: %s\n"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protokol: %s"
-
-#: standalone/net_applet:326
-#, fuzzy, c-format
-msgid "Attacker IP address: %s"
-msgstr "Kompüterin IP ünvanı:"
-
-#: standalone/net_applet:327
-#, fuzzy, c-format
-msgid "Attacker hostname: %s"
-msgstr "%s qovşaq adı verilir: "
-
-#: standalone/net_applet:328
-#, fuzzy, c-format
-msgid "Service attacked: %s"
-msgstr "Xidmət _növü:"
-
-#: standalone/net_applet:329
-#, fuzzy, c-format
-msgid "Port attacked: %s"
-msgstr "Qapı: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Şəbəkə İzlənməsi"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "Qlobal statistikalar"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "Ani"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Orta hesabla"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"Göndərmə\n"
-"sür'əti:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"Alış\n"
-"sür'əti:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"Bağlantı\n"
-"vaxtı:"
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Xahiş edirik, gözləyin, bağlantınız sınanır..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "İnternet bağlantısı kəsilir"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "İnternetə Bağlanır"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "İnternet bağlantısının kəsilməsi bacarılmadı."
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "İnternet bağlantısını tamamilə kəs."
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Bağlantı tamamlandı."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Bağlantı iflas etdi.\n"
-"Mandriva Linux İdarə Mərkəzindən qurğularınızı yoxlayın."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Rəng quraşdırması"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "göndərilən:"
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "alındı: "
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "orta hesabla"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Yerli ölçü vahidi"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Diqqət, başqa internet bağlantısı aşkar edildi, güman ki şəbəkənizi istifadə "
-"edir"
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "İnternet bağlantısı quraşdırılmayıb"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Qurulu çapçılar haqqında mə'lumat alınır..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "%s Çapçı İdarə Vasitəsi"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Gedişatlar"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/Çapçı Ə_lavə Et"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Əsas olaraq _müəyyən et"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Düzəlt"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Sil"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Mütəxəssis modu"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Yenilə"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_CUPS'u quraşdır"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Axtar:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Filtri tətbiq et"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "Tan."
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Çapçı Adı"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Bağlantı Növü:"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Verici Adı"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Çapçı Əlavə Et"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Sistemə yeni çapçı əlavə et"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Əsas olaraq seç"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Seçili olan çapçını əsas olaraq tə'yin et"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Seçili vericini düzəlt"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Seçili çapçını sil"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Siyahını təzələ"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "CUPS'u quraşdır"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "CUPS çap sistemini quraşdır"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Fəal"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "İşlədilə Bilməz"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Müəlliflər:"
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, fuzzy, c-format
-msgid "Printer Management %s"
-msgstr "Çapçı İdarəsi \n"
-
-#: standalone/scannerdrake:51
-#, fuzzy, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr "%s paketi qurulmalıdır. Qurmaq istəyirsiniz?"
-
-#: standalone/scannerdrake:55
-#, fuzzy, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Scannerdrake"
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-"Scannderdrake ilə darayıcını quraşdırmaq üçün lazım olan paketlər qurula "
-"bilmədi."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Scannerdrake indi başladılmayacaq."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Quraşdırılmış darayıvılar axtarılır ..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Yeni darayıcılar axtarılır..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "Quraşdırılmış darayıcıların siyahısı yenidən yaradılır ..."
-
-#: standalone/scannerdrake:101
-#, fuzzy, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "%s Mandriva Linuxun bu buraxılışı tərəfindən dəstəklənmir."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%2$s üstündə %1$s tapıldı, avtomatik quraşdırılsın?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s darayıcı mə'lumat bazasında deyil, onu əllə quraşdırmaq istəyirsiniz?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Darayıcı modelini seçin"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Aşkar edilən model: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Qapı: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr ""
-
-#: standalone/scannerdrake:144
-#, fuzzy, c-format
-msgid "The %s is not supported under Linux."
-msgstr "%s Mandriva Linuxun bu buraxılışı tərəfindən dəstəklənmir."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "Firmware faylını qurma"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr ""
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Firmware-in qurulacağı mövqe"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Firmware faylını seç"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr ""
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "%s üçün firmware faylını seçin"
-
-#: standalone/scannerdrake:276
-#, fuzzy, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Firmware faylını qurma"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr ""
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "%s dəstəklənmir"
-
-#: standalone/scannerdrake:304
-#, fuzzy, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"%s printerdrake tərəfindən quraşdırılmalıdır.\n"
-"Printerdrake'ni Mandriva Linux İdarə Mərkəzindəki Avadanlıq bölməsindən işə "
-"sala bilərsiniz."
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Mövcud qapıları avtomatik təsbit et"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Xahiş edirik, %s'ın bağlı olduğu avadanlığı seçin"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Qeyd: Parallel qapılar avtomatik aşkar edilə bilməz)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "avadanlığı seçin"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Darayıcılar axtarılır..."
-
-#: standalone/scannerdrake:383
-#, fuzzy, c-format
-msgid "Setting up kernel modules..."
-msgstr "İstifadəçi mə'lumatlarını qururam..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, fuzzy, c-format
-msgid "Attention!"
-msgstr "Cazibə"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, fuzzy, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Sizin %s darayıcınız quraşdırıldı.\n"
-"İndi siz Multimediya/Qrafika menyusundakı \"XSane\"i istifadə edərək "
-"sənədləri daraya bilərsiniz."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:406
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"Sizin %s darayıcınız quraşdırıldı.\n"
-"İndi siz Multimediya/Qrafika menyusundakı \"XSane\"i istifadə edərək "
-"sənədləri daraya bilərsiniz."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Sisteminizdə aşağıdakı darayıcılar\n"
-"\n"
-"%s\n"
-"mövcuddur.\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"Açağıdakı darayıcı\n"
-"\n"
-"%s\n"
-"sisteminizdə mövcuddur.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Sisteminizdə darayı tapıla bilmədi.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Yeni darayıcıları axtar"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Darayıcını əllə əlavə et"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Fimware fayllarını Qur/Yenilə"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Darayıcı bölüşməsi"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Bütün uzaq sistemlər"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Bu sistem"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Burada siz, sisteminizə bağlı darayıcıların uzaqdakı sistemlər və hansıları "
-"tərəfindən istifadə edilə biləcəyini tə'yin edə bilərsiniz."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Eyni zamanda, uzaqdakı darayıcıların bu sistemdə istifadəyə açıq olmasını da "
-"burada seçə bilərsiniz."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Bu sistemdəki darayıcılar diqər sistemlər üçün də açıqdır"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Qovşaqlar üçün darayıcı bölüşməsi:"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Uzaq kompüterlərdəki darayıcıları işlət"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Qovşaqlardakı darayıcıları işlət:"
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Yerli çapçıların bölüşülməsi"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "Yerli dayarıcılara yetişilə biləcək sistemlər bunlardır:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Qovşaq əlavə et"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Seçili qovşağı düzəlt"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Seçili qovşağı sil"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Qovşağın Adı/IP ünvanı:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Yerli darayıcıların istifadəyə hansı qovşaqlarda açıq olacağını seçin:"
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Bir qovşaq adı ya da IP ünvanı daxil etməlisiniz.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Bu qovşaq onsuzda siyahıdadır, yenidən əlavə edilə bilməz.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Uzaq darayıcıların istifadəsi"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Bunlar, darayıcılarının istifadə ediləcəyi sistemlərdir:"
-
-#: standalone/scannerdrake:940
-#, fuzzy, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr "%s paketi qurulmalıdır. Qurmaq istəyirsiniz?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "Darayıcı(ları)nız şəbəkə üstündə istifadə edilə bilməyəcək."
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "\"%s\" sinifindəki bəzi avadanlıqlar çıxarıldı:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Bə'zi avadanlıqlar əlavə edildi: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr ""
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Avadanlıq sınaması fəaliyyətdədir"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, fuzzy, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Qurğuları sınamaq istəyirsiniz?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Dil"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Lisenziya"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Siçan qurğuları"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Sabit disklərin aşkar edilməsi"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Qurulum sinifinin seçimi"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Klaviatura seçimi"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Bölmələndirmə"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Bölmələrin şəkilləndirilməsi"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Qurulacaq paketlərin seçimi"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Sistemin qurulumu"
-
-#: steps.pm:25
-#, fuzzy, c-format
-msgid "Administrator password"
-msgstr "Ali istifadəçi şifrəsini tə'yin et"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "İstifadəçi əlavə edilməsi"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Şəbəkənin quraşdırılması"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Sistem yükləyicisinin qurulumu"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "X quraşdırılması"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Xidmətləri quraşdır"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Yeniləmələrin qurulması"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Qurulumun sonu"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Bu düzdür?"
-
-#: ugtk2.pm:968
-#, fuzzy, c-format
-msgid "No file chosen"
-msgstr "fayl seçicisi"
-
-#: ugtk2.pm:970
-#, fuzzy, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Bir qovluq deyil, bir faylı bildirmək məcburiyyətindəsən .\n"
-
-#: ugtk2.pm:972
-#, fuzzy, c-format
-msgid "You have chosen a directory, not a file"
-msgstr ""
-"'/' adları sadəcə bir qovluq ola bilər, qətiyyan'iyyen bir açar ola bilməz"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such directory"
-msgstr "Belə cərgə yoxdur!"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such file"
-msgstr "Belə bir fayl yoxdur : `%s'\n"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Ağacı Aç"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Ağacı Bağla"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Otaq və grup sıralaması arasında gəz"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s qurulu deyil\n"
-"Qurmaq üçün \"Sonrakı\" ya da çıxmaq üçün \"Ləğv Et\" düyməsinə basın."
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Qurulum bacarılmadı"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "Məntiqi uzatmalar ədədi: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Sizin sisteminizin qaynaqları çatışmır. Qurulum ərzində problem yaşaya "
-#~ "bilərsiniz\n"
-#~ "Bu baş verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun üçün "
-#~ "dəCDROMdan başlatdığınız zaman,\n"
-#~ " 'F1'ə basın və 'text' yazaraq enter'ə basın."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Mövcud əkslərin siyahısını almaq üçün Mandriva Linux səhifəsi ilə təmas "
-#~ "qurulur..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Mandriva Linux Qurulumu %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "DİQQƏT: Bu avadanlıq daha əvvəl İntenetə bağlanmaq üçün qurulmuşdur.\n"
-#~ "Avadanlığın qurğularını dəyişdirmaək istəmirsiniz isə,\n"
-#~ "OLDU ya basın.\n"
-#~ "Aşağıdakı girişləri düzəltməniz özünü əvvəlki qurğuların üstünə "
-#~ "yazacaqdır."
-
-# needs editing (Metin)
-#, fuzzy
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/boot1a.bin \\\n"
-#~ "        \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Dinamik IP Ünvan Hovusu:"
-
-#~ msgid "hd"
-#~ msgstr "hd"
-
-#~ msgid "tape"
-#~ msgstr "kaset"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "Uzaq WebDAV saytı onsuzda sync-dədir!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "WebDAV transferi bacarılmadı!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr ""
-#~ "Ehtiyat sərhədi keçildi!\n"
-#~ "%d Mb işlədilib ancaq %d Mb verilmişdi."
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Drakbackup üçün\n"
-#~ "icazə verilən maksimal böyüklük (MB)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-webdav şəbəkəsi.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Qrafiki açılış işlət"
-
-#~ msgid "first step creation"
-#~ msgstr "ilk addım yaradılışı"
-
-#~ msgid "choose image file"
-#~ msgstr "rəsm faylını seçin"
-
-#~ msgid "Browse"
-#~ msgstr "Gəz"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Açılış rəsmini quraşdır"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "irəliləmə çubuğunun rəngi"
-
-#~ msgid "Preview"
-#~ msgstr "Nümayiş"
-
-#~ msgid "Choose color"
-#~ msgstr "Rəngi seç"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "Çəyirdək ismarışlarını əsas olaraq göstərmə"
-
-#~ msgid "Notice"
-#~ msgstr "Qeyd"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "Bu örtük hələlik %s içində sıçrayan ekrana malik deyil !"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Əvvəlcə rəsm faylını seçməlisiniz!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Ümumi nümayiş ..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "%s Açılış Ekranı (%s) nümayişi"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Disket sürücüsü mövcud deyil"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "%s sürücüsünə Yeniləmə Modulları disketini yerləşdirin"
-
-#, fuzzy
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Yugoslav (latın)"
-
-#~ msgid "No network card"
-#~ msgstr "Çəbəkə kartı yoxdur"
-
-#, fuzzy
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "Ssh təsdiqi onsuzda quruludur"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "Heç yazı növü seçmədiniz"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "Heç qurulu səyyar yoxdur! Xahiş edirik, birini qurun"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "Sisteminizdə heç bir səyyah qurulu deyil. Yardım sistemini gəzmək "
-#~ "istəyirsinizsə, xahiş edirik, birini qurun. Gnome işlədirsinizsə "
-#~ "Epiphany, KDE işlədirsinizsə Konqueror proqramını qura bilərsiniz."
-
-#~ msgid "Checking device and configuring HPOJ..."
-#~ msgstr "Avadanlıq yoxlanır və HPOJ quraşdırılır..."
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Disket sürücüyə bir disket yerləşdirin\n"
-#~ "Bu disketdəki bütün mə'lumatlar yox olacaqdır"
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "%s sürücüsünə FAT şəkilləndirilmiş bir disket taxın"
-
-#~ msgid "This floppy is not FAT formatted"
-#~ msgstr "Bu floppi FAT şəklində deyildir"
-
-#~ msgid ""
-#~ "To use this saved packages selection, boot installation with ``linux "
-#~ "defcfg=floppy''"
-#~ msgstr ""
-#~ "Bu saxlanmış paketlər seçkisini işlətmək üçün qurulumu ``linux "
-#~ "defcfg=floppy' ilə başladın."
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Disketə qeyd et/disketdən yüklə"
-
-#~ msgid ""
-#~ "Please choose load or save package selection on floppy.\n"
-#~ "The format is the same as auto_install generated floppies."
-#~ msgstr ""
-#~ "Xahiş edirik, paket seçkilərini disketə qeyd et/disketdən yüklə\n"
-#~ "seçənəyini seçin."
-
-#~ msgid "Load from floppy"
-#~ msgstr "Disketdən yüklə"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Disketə qeyd et"
-
-#~ msgid "Package selection"
-#~ msgstr "Paket seçkisi"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "Disketdən yüklənir"
-
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Paket seçkilərini daxil edən disketi taxın"
-
-#~ msgid "Installing HPOJ package..."
-#~ msgstr "HPOJ paketi qurulur..."
-
-#~ msgid "multi-function device on parallel port #%s"
-#~ msgstr "%s nömrəli paralel qapıdakı çox funksiyalı avadanlıq"
-
-#~ msgid "multi-function device on a parallel port"
-#~ msgstr "paralel qapıdakı çox funksiyalı avadanlıq"
-
-#~ msgid "multi-function device on USB"
-#~ msgstr "USB üstündə çox funksiyalı avadanlıq"
-
-#~ msgid "multi-function device on HP JetDirect"
-#~ msgstr "HP JetDirect üstündə çox funksiyalı avadanlıq"
-
-#~ msgid "multi-function device"
-#~ msgstr "çox funksiyalı avadanlıq"
-
-#~ msgid "printing to %s"
-#~ msgstr "%s'a çap edilir"
-
-#~ msgid "using command %s"
-#~ msgstr "%s əmri ilə"
-
-#~ msgid "Installing HPLIP package..."
-#~ msgstr "HPLIP paketi qurulur..."
-
-#~ msgid "Application:"
-#~ msgstr "Tə'minat:"
-
-#~ msgid "Release: "
-#~ msgstr "Buraxılış:"
-
-#~ msgid "Summary: "
-#~ msgstr "İcmal:"
-
-#~ msgid "Bug Description/System Information"
-#~ msgstr "Xəta İzahatı/Sistem Mə'lumatı"
-
-#~ msgid "YOUR TEXT HERE"
-#~ msgstr "BURADA MƏTNİNİZ YER ALACAQ"
-
-#~ msgid "Submit kernel version"
-#~ msgstr "Çəyirdək buraxılışını göndər"
-
-#~ msgid "Submit cpuinfo"
-#~ msgstr "cpuinfo'nu göndər"
-
-#~ msgid "Submit lspci"
-#~ msgstr "lspci-ni göndər"
-
-#~ msgid "NOT FOUND"
-#~ msgstr "TAPILMADI"
-
-#~ msgid "connecting to %s..."
-#~ msgstr "%s ünvanına bağlanır ..."
-
-#~ msgid "Please enter a package name."
-#~ msgstr "Xahiş edirik, paket adını daxil edin."
-
-#~ msgid "Please enter summary text."
-#~ msgstr "Xahiş edirik, icmal mətnini daxil edin."
-
-#~ msgid "Loading printer configuration... Please wait"
-#~ msgstr "Çapçı qurğuları yüklənir... Xahiş edirik, gözləyin"
-
-#~ msgid "Root password"
-#~ msgstr "Ali istifadəçi şifrəsi"
-
-#~ msgid "Do you want to recover your system?"
-#~ msgstr "Sisteminizi düzəltmək istəyirsiniz?"
-
-#~ msgid "Samba server"
-#~ msgstr "Samba vericisi"
-
-#~ msgid "Move"
-#~ msgstr "Daşı"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "Hansı diskə daşımaq istəyirsiniz?"
-
-#~ msgid "Sector"
-#~ msgstr "Sektor"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "Onu hansı sektora daşımaq istəyirsiniz?"
-
-#~ msgid "Moving"
-#~ msgstr "Daşınır"
-
-#~ msgid "Moving partition..."
-#~ msgstr "Bölmə daşınır..."
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "Yazmaq üçün açılan %s'də xəta: %s"
-
-#~ msgid "OK"
-#~ msgstr "Oldu"
-
-#~ msgid "NO"
-#~ msgstr " XEYİR"
-
-#~ msgid "YES"
-#~ msgstr "BƏLİ"
-
-#~ msgid ""
-#~ "The following options can be set to customize your\n"
-#~ "system security. If you need an explanation, look at the help tooltip.\n"
-#~ msgstr ""
-#~ "Sisteminizin təhükəsizliyini müəyyən etmək üçün aşağıdakı seçimlər\n"
-#~ "mövcuddur. İzahata ehtiyacınız varsa, yardım bölməsinə baxın.\n"
-
-#~ msgid "The %s is not known by this version of Scannerdrake."
-#~ msgstr "%s, Scannerdrake'nın bu buraxılışı tərəfindən tanınmır. "
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Çex dili (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Almanca"
-
-#~ msgid "Dvorak"
-#~ msgstr "Dvorak"
-
-#~ msgid "Spanish"
-#~ msgstr "İspanca"
-
-#~ msgid "Finnish"
-#~ msgstr "Fin dili"
-
-#~ msgid "French"
-#~ msgstr "Fransızca"
-
-#~ msgid "Norwegian"
-#~ msgstr "Norveç dili"
-
-#~ msgid "Polish"
-#~ msgstr "Polyak dili"
-
-#~ msgid "Russian"
-#~ msgstr "Rusca"
-
-#~ msgid "Swedish"
-#~ msgstr "İsveçcə"
-
-#~ msgid "Albanian"
-#~ msgstr "Albanca"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Ermeni dili (köhnə) "
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Ermenicə (yazı makinası)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Ermenicə (fonetik)"
-
-#~ msgid "Arabic"
-#~ msgstr "Ərəb dili"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Azərbaycanca (latın)"
-
-#~ msgid "Belgian"
-#~ msgstr "Belçika dili"
-
-#~ msgid "Bengali"
-#~ msgstr "Benqal dili"
-
-#~ msgid "Bulgarian (phonetic)"
-#~ msgstr "Bolqar (fonetik)"
-
-#~ msgid "Bulgarian (BDS)"
-#~ msgstr "Bulqar dili (BDS)"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Brazilya dili (ABNT-2)"
-
-#~ msgid "Bosnian"
-#~ msgstr "Bosniya"
-
-#~ msgid "Belarusian"
-#~ msgstr "Belarus dili"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "İsveçcə (Alman sırası)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "İsveçrə dili (Fransız düzülüşü)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Çex dili (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Almanca (ölü düymələr olmasın)"
-
-#~ msgid "Devanagari"
-#~ msgstr "Devanaqari"
-
-#~ msgid "Danish"
-#~ msgstr "Danimarka dili"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Dvorak (US)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Dvorak (Norveç dili)"
-
-#~ msgid "Dvorak (Swedish)"
-#~ msgstr "Dvorak (İsveç)"
-
-#~ msgid "Estonian"
-#~ msgstr "Estoniya dili"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Gürcü dili (\"Rus\" sırası)"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Gürcü dili (\"Latın\" sırası)"
-
-#~ msgid "Greek"
-#~ msgstr "Yunanca"
-
-#~ msgid "Greek (polytonic)"
-#~ msgstr "Yunanca (politonik)"
-
-#~ msgid "Gujarati"
-#~ msgstr "Gujarati dili"
-
-#~ msgid "Gurmukhi"
-#~ msgstr "Qurmuxi"
-
-#~ msgid "Hungarian"
-#~ msgstr "Macar dili"
-
-#~ msgid "Croatian"
-#~ msgstr "Xorvat dili"
-
-#~ msgid "Irish"
-#~ msgstr "İrlandiya Dili"
-
-#~ msgid "Israeli"
-#~ msgstr "Yəhudi dili"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Yəhudi dili (Fonetik)"
-
-#~ msgid "Iranian"
-#~ msgstr "Farsca"
-
-#~ msgid "Icelandic"
-#~ msgstr "İslandiya dili"
-
-#~ msgid "Italian"
-#~ msgstr "İtalyan dili"
-
-#~ msgid "Inuktitut"
-#~ msgstr "Inuktitut"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Yapon dili 106 düyməli"
-
-#~ msgid "Kannada"
-#~ msgstr "Kanada"
-
-#~ msgid "Korean keyboard"
-#~ msgstr "Koreya klaviaturası"
-
-#~ msgid "Latin American"
-#~ msgstr "Latın Amerika dili"
-
-#~ msgid "Laotian"
-#~ msgstr "Laotian"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Litvaniya dili AZERTY (köhnə)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Litva dili AZERTY (yeni)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Litvanya dili \"number row\" QWERTY"
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Litvanya dili \"Fonetik\" QWERTY"
-
-#~ msgid "Latvian"
-#~ msgstr "Latış dili"
-
-#~ msgid "Malayalam"
-#~ msgstr "Malayalam dili"
-
-#~ msgid "Macedonian"
-#~ msgstr "Makedoniya dili"
-
-#~ msgid "Myanmar (Burmese)"
-#~ msgstr "Myanmar dili  (Burmese)"
-
-#~ msgid "Mongolian (cyrillic)"
-#~ msgstr "Mongolca (kiril)"
-
-#~ msgid "Maltese (UK)"
-#~ msgstr "Malta (UK)"
-
-#~ msgid "Maltese (US)"
-#~ msgstr "Malta (US)"
-
-#~ msgid "Dutch"
-#~ msgstr "Hollandiya dili"
-
-#~ msgid "Oriya"
-#~ msgstr "Oriya"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Polyakca (QWERTY sırası)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Polyakca (QWERTZ sırası)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Portuqalca"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Fransız dili (Kanada/Quebec)"
-
-#~ msgid "Romanian (qwertz)"
-#~ msgstr "Rumın (qwertz)"
-
-#~ msgid "Romanian (qwerty)"
-#~ msgstr "Rumın (qwerty)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Rus dili (Fonetik)"
-
-#~ msgid "Saami (norwegian)"
-#~ msgstr "Saami (Norveç dili)"
-
-#~ msgid "Saami (swedish/finnish)"
-#~ msgstr "Saami (isveç/fin)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Slovencə"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Slovakca (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Slovakca (QWERTY)"
-
-#~ msgid "Serbian (cyrillic)"
-#~ msgstr "Serbcə (kiril)"
-
-#~ msgid "Syriac"
-#~ msgstr "Siriak"
-
-#~ msgid "Syriac (phonetic)"
-#~ msgstr "Siriak (fonetik)"
-
-#~ msgid "Telugu"
-#~ msgstr "Telugu"
-
-#~ msgid "Tamil (ISCII-layout)"
-#~ msgstr "Tamil (ISCII-ldüzülüşü)"
-
-#~ msgid "Tamil (Typewriter-layout)"
-#~ msgstr "Tamil dili (Yazı makinası düzülüşü)"
-
-#~ msgid "Thai keyboard"
-#~ msgstr "Tay klaviaturası"
-
-#~ msgid "Tajik keyboard"
-#~ msgstr "Tacik klaviaturası"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Türkcə (ənənəvi \"F\" klaviatura)"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Türk dili (müasir \"Q\" klaviatura)"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Ukrayna"
-
-#~ msgid "Uzbek (cyrillic)"
-#~ msgstr "Özbək dili (kiril)"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Vyetnam dili \"numeric row\" QWERTY"
-
-#~ msgid "Yugoslavian (latin)"
-#~ msgstr "Yugoslav (latın)"
diff --git a/perl-install/share/po/b_dump_strings.pm b/perl-install/share/po/b_dump_strings.pm
deleted file mode 100644
index 791eb97aa..000000000
--- a/perl-install/share/po/b_dump_strings.pm
+++ /dev/null
@@ -1,113 +0,0 @@
-package b_dump_strings;
-
-use B qw(minus_c save_BEGINs peekop class walkoptree walkoptree_exec
-         main_start main_root cstring sv_undef);
-
-BEGIN { open OUT, ">$ENV{OUTFILE}" }
-
-sub B::CV::debug {
-    my ($sv) = @_;
-    B::walkoptree_exec($sv->START, "debug");
-}
-
-sub B::OP::debug {
-    my ($op) = @_;
-#    print "OP ", class($op), " ", $op->name, "\n";
-    eval {
-	if ($op->name eq 'entersub') {
-	    $op2 = $op->first->first or return;
-
-	    if ($op2->name eq 'pushmark') {
-		my $s = $op2->sibling->sv->PV;
-		my $l;
-		for ($l = $op2->sibling; ${$l->sibling}; $l = $l->sibling) {}
-
-		$s =~ s/"/\\"/g;
-		if ($l->first->sv->NAME eq '_') {
-		    print OUT qq($::pkg N("$s")\n);
-		}
-	    }
-	}
-    };
-}
-sub B::RV::debug {
-    my ($op) = @_;
-    $op->RV->debug;
-}
-sub B::SVOP::debug {
-    my ($op) = @_;
-    $op->sv->debug;
-}
-sub B::PV::debug {
-    my ($sv) = @_;
-#    print "STRING ", $sv->PV, "\n";
-}
-sub B::IV::debug {
-    my ($sv) = @_;
-#    printf "IV\t%d\n", $sv->IV;
-}
-sub B::NV::debug {
-    my ($sv) = @_;
-#    printf "NV\t%s\n", $sv->NV;
-}
-sub B::PVIV::debug {
-    my ($sv) = @_;
-#    printf "IV\t%d\n", $sv->IV;
-}
-sub B::PVNV::debug {
-    my ($sv) = @_;
-#    printf "NV\t%s\n", $sv->NV;
-}
-sub B::AV::debug {
-    my ($av) = @_;
-#    print "ARRAY\n";
-}
-sub B::GV::debug {
-    my ($gv) = @_;
-#    printf "GV %s::%s\n", $gv->STASH->NAME, $gv->SAFENAME;
-}
-sub B::NULL::debug { 
-#    print "NUL\n";
-}
-sub B::SPECIAL::debug {}
-
-sub B::SV::debug { die "SV"; }
-sub B::BM::debug { 
-    die "BM"; 
-}
-sub B::PVLV::debug { die "PVLV"; }
-
-sub B::GV::pgv {
-    my ($gv) = @_;
-#    print $gv->NAME, "\n";
-    $gv->SV->debug;
-    $gv->HV->debug;
-    $gv->AV->debug;
-    $gv->CV->debug;
-}
-
-
-
-
-sub search {
-
-foreach my $pkg (grep { /^[a-z]/ && !/^(diagnostics|strict|attributes|main)/ } grep { /\w+::$/ } keys %main::) {
-    $::pkg = $pkg;
-    foreach (keys %{$main::{$pkg}}) {
-	print STDERR "$pkg $_ XXXXX\n";
-	local *f = *{$main::{$pkg}{$_}};
-	B::svref_2object(\*f)->pgv;
-    }
-}
-print STDERR "DONE\n";
-}
-
-CHECK { search() }
-INIT { exit 0 }
-
-#use lib qw(. /home/pixel/gi/perl-install);
-##use commands;
-#require '/tmp/t.pl';
-#search();
-
-1;
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
deleted file mode 100644
index 27f3f857f..000000000
--- a/perl-install/share/po/be.po
+++ /dev/null
@@ -1,23758 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) 1999 Mandriva.
-# Alexander Bokovoy <ab@avilink.net>, 2000
-# Maryia Davidouskaia <maryia@scientist.com>, 2000
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2000-09-24 12:30 +0100\n"
-"Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
-"Language-Team: be\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../move/move.pm:292
-#, fuzzy, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Які тып пункта жадаеце дадаць?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr ""
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Паўтарыць"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr ""
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Перазагрузка"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr ""
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr ""
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr ""
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "Канфігурацыя сыстэмы друку (прынтэры, заданьні, клясы, ...)"
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-
-#: ../move/move.pm:556
-#, fuzzy, c-format
-msgid "Auto configuration"
-msgstr "Настройка IDE"
-
-#: ../move/move.pm:556
-#, fuzzy, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Канфігурацыя сыстэмы друку (прынтэры, заданьні, клясы, ...)"
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Памылка"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Узнікла памылка, якую не атрымліваецца карэктна апрацаваць,\n"
-"таму працягвайце на сваю рызыку."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Адбылася памылка"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#: ../move/move.pm:681
-#, fuzzy, c-format
-msgid "Remove system config files"
-msgstr "Прагледзіць файлы сыстэмных часопісаў"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr ""
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:71
-#, fuzzy, c-format
-msgid "Kill those programs"
-msgstr "Выберыце праграму для выкананьня"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Чытайце ўважліва!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 Кб"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 Кб"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 Мб"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 Мб"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 Мб"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 Мб"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 Мб"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 Мб"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 Мб ці болей"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X сэервер"
-
-#: Xconfig/card.pm:160
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "X сэервер"
-
-#: Xconfig/card.pm:192
-#, fuzzy, c-format
-msgid "Multi-head configuration"
-msgstr "Канфігурацыя"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: Xconfig/card.pm:262
-#, fuzzy, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Усталяванне пакету %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Пазначце памер відэапамяці"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Настройка Xorg"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Якую канфігурацыю Xorg вы жадаеце атрымаць?"
-
-#: Xconfig/card.pm:384
-#, fuzzy, c-format
-msgid "Configure all heads independently"
-msgstr "Настроіць панэль"
-
-#: Xconfig/card.pm:385
-#, fuzzy, c-format
-msgid "Use Xinerama extension"
-msgstr "Пашырэнне файла"
-
-#: Xconfig/card.pm:390
-#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Наладка вашага сэансу"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Сервер XFree86 %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s з падтрымкай 3D-паскарэння"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr ""
-"Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg %s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s з эксперыментальнай падтрымкай 3D-паскарэння"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg %"
-"s.\n"
-"МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА І МОЖА ПРЫВЕСЦІ ДА\n"
-"ЗАВІСАННЯ ВАШАГА КАМП'ЮТЭРУ."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Па выбару"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Выхад"
-
-#: Xconfig/main.pm:117
-#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Відэакарта: %s"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Манітор"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Памеры экрану"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Тэст"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Опцыі"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Ці жадаеце Вы захаваць змяненні?\n"
-"Бягучая канфігурацыя:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, fuzzy, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Абярыце манітор"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Абярыце манітор"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr ""
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Агульны"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Рэдактары"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Два крытычных параметры - гэта часціня вертыкальнай разгорткі, ці\n"
-"часціня аднаўлення ўсяго экрану, а таксама болей важны параметр -\n"
-"часціня гарызантальнай сінхранізацыі разгорткі, ці часціня вываду\n"
-"радкоў экрану.\n"
-"\n"
-"ВЕЛЬМІ ВАЖНА, каб абраны вамі манітор меў часціню сінхранізацыі, якая\n"
-"не перавышае фактычныя магчымасці вашага манітору: у процілеглым выпадку\n"
-"вы можаце сапсаваць манітор.\n"
-"Калі вы сумняваецеся, абярыце кансерватыўныя настройкі."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Часціня гарызантальный разгорткі"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Часціня вертыкальнай разгорткі"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 колераў (8 бітаў)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 тысячы колераў (15 бітаў)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 тысяч колераў (16 бітаў)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 мільёнаў колераў (24 біты)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Памеры экрану"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Іншыя"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Выбар памераў экрану і глыбіні колеру"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Відэакарта: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "Ок"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Адмена"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Дапамога"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Праверка параметраў настройкі"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Ці жадаеце пратэсціраваць настройкі?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-
-#: Xconfig/test.pm:129
-#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d секундаў"
-
-#: Xconfig/test.pm:129
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Гэта дакладна?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Тып клавіятуры: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Тып мышы: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Мыш: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Манітор: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Часціня гар.разг. манітору: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Часціня верт.разг. манітору: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Відэакарта: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Відэапамяць: %s Кб\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Параметры глыбіні колеру: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Памеры экрану: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Сервер Xorg: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Запуск X пры старце сістэмы"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Можна настроіць сістэму для аўтаматычнага запуску X пасля старту сістэмы.\n"
-"Жадаеце, каб X стартаваў пры рэстарце?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr ""
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Калі ласка, пачакайце"
-
-#: any.pm:143
-#, fuzzy, c-format
-msgid "Bootloader installation in progress"
-msgstr "Усталяванне загрузчыку"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Працэс усталявання загрузчыка не атрымаўся. Узнікла наступная памылка:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Першы сектар прылады (MBR)"
-
-#: any.pm:233
-#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Першы сектар загрузачнага раздзелу"
-
-#: any.pm:235
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Захаванне на дыскету"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Прапусціць"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "Усталяванне LILO/GRUB"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?"
-
-#: any.pm:268 standalone/drakboot:261
-#, fuzzy, c-format
-msgid "Boot Style Configuration"
-msgstr "Настройка IDE"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Галоўныя опцыі пачатковага загрузчыку"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Пазначце памер RAM у Мб"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Опцыя ‟Абмежаванне опцыяў каманднага радку“ не выкарыстоўваецца без пароля"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Паролі не супадаюць"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Паспрабуйце яшчэ раз"
-
-#: any.pm:282 any.pm:305
-#, fuzzy, c-format
-msgid "Bootloader to use"
-msgstr "Галоўныя опцыі пачатковага загрузчыку"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Загрузачная прылада"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Затрымка перад загрузкай вобразу па дамаўленню"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr ""
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr ""
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr ""
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Пароль"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Паўтарыце пароль"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Абмежаванне опцыяў каманднага радка"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "абмежаванне"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Ачышчаць /tmp пры кожнай загрузцы"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Пазначце дакладны памер RAM (знойдзена %d Мб)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr ""
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: any.pm:310
-#, fuzzy, c-format
-msgid "Enable CD Boot?"
-msgstr "Дазволіць 6dB павышэнне + цяжкае лімітаванне"
-
-#: any.pm:311
-#, fuzzy, c-format
-msgid "Enable OF Boot?"
-msgstr "Дазволіць 6dB павышэнне + цяжкае лімітаванне"
-
-#: any.pm:312
-#, fuzzy, c-format
-msgid "Default OS?"
-msgstr "Па дамаўленню"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Вобраз"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Root"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Далучыць"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Відэа-рэжым"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, fuzzy, c-format
-msgid "Network profile"
-msgstr "Сеткавы інтэрфейс"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Метка"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Па дамаўленню"
-
-#: any.pm:390
-#, fuzzy, c-format
-msgid "Initrd-size"
-msgstr "Initrd"
-
-#: any.pm:392
-#, fuzzy, c-format
-msgid "NoVideo"
-msgstr "Відэа"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Пустая метка не дазваляецца"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: any.pm:404
-#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "Першы сектар загрузачнага раздзелу"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Гэтая метка ўжо выкарыстоўваецца"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Які тып пункта жадаеце дадаць?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Іншая АС (SunOS,...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Іншая АС (MacOS,...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Іншая АС (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"У меню маюцца наступныя пункты.\n"
-"Вы можаце дадаць яшчэ, альбо змяніць існуючыя."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr ""
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr ""
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr ""
-
-#: any.pm:599
-#, fuzzy, c-format
-msgid "access to administrative files"
-msgstr "Выкарыстоўваць настройкі сыстэмнага адміністратара"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr ""
-
-#: any.pm:601
-#, fuzzy, c-format
-msgid "access to compilation tools"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(ужо дададзена %s)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Гэты пароль занадта просты"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Калі ласка, увядзіце імя карыстальніку"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Імя карыстальніку павінна змяшчаць літары толькі на ніжнім рэгістры, \n"
-"лічбы, ‛-’ і ‛_’"
-
-#: any.pm:614
-#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Імя занадта доўгае"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Гэта імя карыстальніку ўжо дададзена"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Дадаць карыстальніка"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Увядзіце імя карыстальніку\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Зроблена"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Прыняць карыстальніка"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Уласнае імя"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, fuzzy, c-format
-msgid "Login name"
-msgstr "Гульня ў косьці"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Абалонка:"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Піктаграма"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Аўтаматычны ўваход у сістэму"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-
-#: any.pm:690 help.pm:51
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Вы жадаеце выкарыстоўваць aboot?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Так"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Не"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Абярыце асноўнага карыстальніка:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Абярыце мэнэджар вокнаў:"
-
-#: any.pm:706
-#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: any.pm:707
-#, fuzzy, c-format
-msgid "Language choice"
-msgstr "Выбар мовы"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Вы можаце абраць іншыя мовы, якія будуць даступны пасля ўсталявання"
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr ""
-
-#: any.pm:753 help.pm:647
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "Выбар мовы"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, fuzzy, c-format
-msgid "Country / Region"
-msgstr "Краіна - рэгіён і мова"
-
-#: any.pm:795
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr ""
-
-#: any.pm:798
-#, fuzzy, c-format
-msgid "Other Countries"
-msgstr "Парты вываду:"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Адмысловае"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr ""
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Нічога"
-
-#: any.pm:921
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "Нічога"
-
-#: any.pm:921
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "Дадаць карыстальніка"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Зачыніць"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Лякальны файл"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr ""
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr ""
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr ""
-
-#: authentication.pm:28 authentication.pm:153
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "Уласьцівасьці акна"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr ""
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr ""
-
-#: authentication.pm:56
-#, fuzzy, c-format
-msgid "Local file:"
-msgstr "Загрузіць файл(ы):"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, fuzzy, c-format
-msgid "Windows Domain:"
-msgstr "Уласьцівасьці акна:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr ""
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr ""
-
-#: authentication.pm:86
-#, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "Аўтэнтыфікацыя"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "Сервак"
-
-#: authentication.pm:101 fsedit.pm:21
-#, fuzzy, c-format
-msgid "simple"
-msgstr "Тэма"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, fuzzy, c-format
-msgid "Authentication Active Directory"
-msgstr "Аўтэнтыфікацыя"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Маёнтак"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Сервак"
-
-#: authentication.pm:115
-#, fuzzy, c-format
-msgid "LDAP users database"
-msgstr "База даньняў дыскаў"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, fuzzy, c-format
-msgid "Password for user"
-msgstr "Настроіць паролі"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Шыфраваньне"
-
-#: authentication.pm:130
-#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "Аўтэнтыфікацыя"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS Domain"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS сэервер:"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-
-#: authentication.pm:149
-#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "Аўтэнтыфікацыя"
-
-#: authentication.pm:154
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Імя дамену"
-
-#: authentication.pm:155
-#, fuzzy, c-format
-msgid "Domain Admin Password"
-msgstr "Яшчэ раз пароль:"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, fuzzy, c-format
-msgid "Default Idmap "
-msgstr "Скура Па ўмаўчанні"
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-
-#: authentication.pm:172
-#, fuzzy, c-format
-msgid "Set administrator (root) password"
-msgstr "Пароль для root"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, fuzzy, c-format
-msgid "Authentication method"
-msgstr "Аўтэнтыфікацыя"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Няма паролю"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Гэты пароль занадта просты (яго даўжыня павінна быць не меней за %d літараў)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Аўтэнтыфікацыя"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "Немагчыма выкарыстоўваць broadcast без дамена NIS"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr ""
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "Не хапае дыскавай прасторы ў /boot"
-
-#: bootloader.pm:1389
-#, fuzzy, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-
-#: bootloader.pm:1437
-#, fuzzy, c-format
-msgid "Re-install Boot Loader"
-msgstr "Усталяванне загрузчыку"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "кб"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "Мб"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "Гб"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr ""
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d хвілін"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 хвіліна"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d секундаў"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr ""
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Аўстрыя"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Аўстралія"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Бельгія"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Бразылія"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Канада"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Щвэйцарыя"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Коста-Рыка"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Чэская Рэспубліка"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Нямецкі"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Данія"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Курляндыя"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Гішпанія"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Фінляндыя"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Францыя"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Грэцыя"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Вугоршчына"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Ірляндыя"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Габрэйшчына"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Італія"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Японія"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Нідэрлянды"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Нарвэгія"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Новая Зэляндыя"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Польшча"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Партугалія"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Расея"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Швэцыя"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Словакія"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Тайланд"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Тайвань"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Паўднёвая Афрыка"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Злучаныя Штаты"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Новы"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Разманціраваць"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Манціраванне"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Кропка манціравання"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr ""
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr ""
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Паслужнік: "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Пункт манціравання:"
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Опцыі: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Па-першае, зрабіце рэзервовую копію вашых дадзеных"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Калі вы плануеце выкарыстоўваць boot вобласць, тады размясціце яе\n"
-" не далей за 2048 сектароў ад пачатку дыска"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Майстар стварэння"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Абярыце дзеянне"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Націсніце на раздзел"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Падрабязнасці"
-
-#: diskdrake/hd_gtk.pm:254
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Вызначэнне жорсткага дыску"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr ""
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Вокны"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Пуста"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Тыпы файлавых сістэмаў:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Выкарыстоўвайце ‟%s” замест"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Стварыць"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Тып"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Знішчыць"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Спачатку зрабіце ‟Unmount”"
-
-#: diskdrake/interactive.pm:191
-#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "Стварэнне новага раздзелу"
-
-#: diskdrake/interactive.pm:191
-#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "Абярыце дзеянне"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Выход"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Адкат"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Звычайны рэжым"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Рэжым эксперту"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Сапраўды працягваць?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Выйсці без захавання"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Выйсці без запісу табліцы раздзелаў"
-
-#: diskdrake/interactive.pm:287
-#, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ці жадаеце пратэсціраваць настройкі?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Каб мадыфікацыя табліцы раздзелаў здейснілася, патрэбна перазагрузка."
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Ачысціць усё"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Размеркаваць аўтаматычна"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, fuzzy, c-format
-msgid "More"
-msgstr "Перанос"
-
-#: diskdrake/interactive.pm:314
-#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Усе першасныя раздзелы выкарыстаны"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Дадаць раздзел немагчыма"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Каб зрабіць больш разделаў, выдаліце адзін і стварыце пашыраны раздзел "
-"(extended)"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Дадатковая табліца раздзелаў"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "Дадатковая табліца раздзелаў"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Дадатковая табліца раздзелаў"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "Дадатковая табліца раздзелаў"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr ""
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Абярыце файл"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Табліца размяшчэння рэзервовага дыску мае іншы памер\n"
-"Працягваць далей?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Паспрабуем выратаваць табліцу раздзелаў"
-
-#: diskdrake/interactive.pm:431
-#, fuzzy, c-format
-msgid "Detailed information"
-msgstr "Інфармацыя аб DMA"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Змяненне памераў"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Фарматаванне"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Дадаць да RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Дадаць да LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Выдаліць з RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Выдаліць з LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Змяніць RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Выкарыстоўваць для віртуальнай файлавай сістэмы"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Стварэнне новага раздзелу"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Пачатковы сектар:"
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Памер у Мб:"
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Тып файлавай сістэмы:"
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Параметры: "
-
-#: diskdrake/interactive.pm:526
-#, fuzzy, c-format
-msgid "Logical volume name "
-msgstr "Гульня ў косьці"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-
-#: diskdrake/interactive.pm:586
-#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "/Выдаліць дохлыя файлы"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны пасля змены яго тыпу"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Змяніць тып раздзелу"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, fuzzy, c-format
-msgid "Which filesystem do you want?"
-msgstr "Які тып пункта жадаеце дадаць?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: diskdrake/interactive.pm:655
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Куды вы жадаеце манціраваць прыладу %s?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Куды вы жадаеце манціраваць прыладу %s?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Нельга ўсталяваць пункт манціравання, таму што раздел выкарыстоўваецца для\n"
-"віртуальнай файлавай сістэмы.\n"
-"Спачатку выдаліце віртуальную сістэму"
-
-#: diskdrake/interactive.pm:686
-#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Куды вы жадаеце манціраваць прыладу %s?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Змяненне памераў"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Падлік межаў файлавай сістэмы FAT"
-
-#: diskdrake/interactive.pm:750
-#, fuzzy, c-format
-msgid "This partition is not resizeable"
-msgstr "Памеры якога раздзела вы жадаеце змяніць?"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Усе дадзеныя ў гэтым раздзеле павінны быць зархіваваныя"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Выбар новых памераў"
-
-#: diskdrake/interactive.pm:763
-#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "Памер у Мб:"
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Абярыце існуючы RAID для дадання"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "новы"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Выбярыце існуючы LVM для дабаўлення"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr ""
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Гэты раздзел не можа быць выкарыстаны пад віртуальную файлавую сістэму"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Віртуальная файлавая сістэма (loopback)"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Імя віртуальнага раздзелу"
-
-#: diskdrake/interactive.pm:923
-#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "Уласнае імя"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Файл ужо існуе. Выкарыстаць яго?"
-
-#: diskdrake/interactive.pm:950
-#, fuzzy, c-format
-msgid "Mount options"
-msgstr "Опцыі модулю:"
-
-#: diskdrake/interactive.pm:957
-#, fuzzy, c-format
-msgid "Various"
-msgstr "прылада"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "прылада"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "узровень"
-
-#: diskdrake/interactive.pm:1023
-#, fuzzy, c-format
-msgid "chunk size in KiB"
-msgstr "памер блоку"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Будзьце уважлівы. Гэтую аперацыю нельга адмяніць"
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr ""
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Каб змяненні ўступілі ў дзеянне, необходна перазагрузіцца"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Табліца размяшчэння прылады %s будзе запісана на дыск!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Усе дадзеные ў раздзеле %s будуць страчаны пасля фарматавання"
-
-#: diskdrake/interactive.pm:1131
-#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
-
-#: diskdrake/interactive.pm:1131
-#, fuzzy, c-format
-msgid "Hide files"
-msgstr "Загрузіць файл(ы)"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1143
-#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
-
-#: diskdrake/interactive.pm:1147
-#, fuzzy, c-format
-msgid "Copying %s"
-msgstr "Копія:"
-
-#: diskdrake/interactive.pm:1151
-#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Памеры экрану: %s\n"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Прылада:"
-
-#: diskdrake/interactive.pm:1187
-#, fuzzy, c-format
-msgid "Devfs name: "
-msgstr "Імя машыны"
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Літара для DOS-дыску: %s (наўгад)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Тып: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Імя: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Пачатак: сектар %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Памер: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s сектараў"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Фарматаванне\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Не адфарматавана\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Заманціравана\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Імя файлу віртуальнай файлавай сістэмы: %s"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Загрузачны раздзел па дамаўленню\n"
-"    (для загрузкі MS-DOS, а не для lilo)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Узровень %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, fuzzy, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Памер фрагменту %s\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-дыскі %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Імя файлу віртуальнай файлавай сістэмы: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Толькі для чытаньня"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Памер: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Геаметрыя: %s цыліндраў, %s галовак, %s сектараў\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Інфармацыя: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-дыскі %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Тып табліцы раздзелаў: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1287
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Тыпы файлавых сістэмаў:"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: diskdrake/interactive.pm:1291
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Гэты пароль занадта просты (яго даўжыня павінна быць не меней за %d літараў)"
-
-#: diskdrake/interactive.pm:1292
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Паролі не супадаюць"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr ""
-
-#: diskdrake/removable.pm:46
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "Змяніць тып раздзелу"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Аўтэнтыфікацыя"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, fuzzy, c-format
-msgid "Which username"
-msgstr "Імя карыстальніку:"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "Мэнэджэр файлаў"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Карыстальнік"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "Адшукаць файлы на дыску"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr ""
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Зьмяненьні не былі захаваныя. Ці жадаеце працягнуць?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: do_pkgs.pm:182
-#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "Усталяванне пакету %s"
-
-#: do_pkgs.pm:227
-#, fuzzy, c-format
-msgid "Removing packages..."
-msgstr "Прагляд даступных пакетаў"
-
-#: fs.pm:487 fs.pm:536
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Фарматаванне раздзелу %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: fs.pm:508 fs.pm:515
-#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "Праверка правапісу"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "памылка разманціравання %s: %s"
-
-#: fs.pm:585
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Фарматаванне раздзелу %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Фарматаванне раздзелу %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Стварэнне і фарматаванне файла %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "Не ведаю як адфарматаваць %s з тыпам %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s памылка фарматавання %s"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr ""
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr ""
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr ""
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr ""
-
-#: fs/type.pm:372
-#, fuzzy, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "Вы не можаце разбіваць на разделы, памер якіх меней за 32 Мб"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "Вы не можаце разбіваць на разделы, памер якіх меней за 32 Мб"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr ""
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "сэервер"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Пункт манціравання павінен пачынацца з /"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ужо ёсць раздзел з пунктам манціравання %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr ""
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Гэты каталог павінен знаходзіцца ўнутры каранёвай файлавай сістэмы"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-
-#: fsedit.pm:484
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
-
-#: fsedit.pm:486
-#, fuzzy, c-format
-msgid "Nothing to do"
-msgstr "Нічога"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Гнуткі дыск"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr ""
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Жорскі дыск"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr ""
-
-#: harddrake/data.pm:107
-#, fuzzy, c-format
-msgid "CD/DVD burners"
-msgstr "CDDB сервакі"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr ""
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, fuzzy, c-format
-msgid "Tape"
-msgstr "Тып"
-
-#: harddrake/data.pm:136
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Відэа"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr ""
-
-#: harddrake/data.pm:163
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Мульцімедыя"
-
-#: harddrake/data.pm:172
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Гук"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr ""
-
-#: harddrake/data.pm:199
-#, fuzzy, c-format
-msgid "Processors"
-msgstr "Працэсар"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr ""
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Іншае"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Мадэм"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr ""
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Памяць"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr ""
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Прынтэр"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Джойсьцік"
-
-#: harddrake/data.pm:358
-#, fuzzy, c-format
-msgid "SATA controllers"
-msgstr "Кіраванне"
-
-#: harddrake/data.pm:367
-#, fuzzy, c-format
-msgid "RAID controllers"
-msgstr "Кіраванне"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr ""
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr ""
-
-#: harddrake/data.pm:394
-#, fuzzy, c-format
-msgid "PCMCIA controllers"
-msgstr "Кіраванне"
-
-#: harddrake/data.pm:403
-#, fuzzy, c-format
-msgid "SCSI controllers"
-msgstr "Кіраванне"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr ""
-
-#: harddrake/data.pm:421
-#, fuzzy, c-format
-msgid "USB ports"
-msgstr "USB прылады"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr ""
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Клавіятура"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Мыш"
-
-#: harddrake/data.pm:483
-#, fuzzy, c-format
-msgid "UPS"
-msgstr "HFS"
-
-#: harddrake/data.pm:492
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "Прайгравальнік дыскаў"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr ""
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr ""
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, fuzzy, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Праверка параметраў настройкі"
-
-#: harddrake/sound.pm:227
-#, fuzzy, c-format
-msgid "No alternative driver"
-msgstr "Выкарыстаць альтэрнатыўную прыладу"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-
-#: harddrake/sound.pm:234
-#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Настройка драйверу Sun"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, fuzzy, c-format
-msgid "Driver:"
-msgstr "Прылада %d"
-
-#: harddrake/sound.pm:262
-#, fuzzy, c-format
-msgid "Trouble shooting"
-msgstr "Настройкі мышы"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Увага!"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr ""
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr ""
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
-
-#: harddrake/sound.pm:287
-#, fuzzy, c-format
-msgid "Unknown driver"
-msgstr "Невядомая гукавая карта"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr ""
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "Аўтаматычнае вызначэнне"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Агульны"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-
-#: harddrake/v4l.pm:312
-#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Рэжым прайгравання"
-
-#: harddrake/v4l.pm:313
-#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Тып мышы: %s\n"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: harddrake/v4l.pm:316
-#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "Настройкі шрыфтоў"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr ""
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr ""
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Прыняць"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Імя карыстальніку:"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Далей"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-
-#: help.pm:146 share/compssUsers.pl:23
-#, fuzzy, c-format
-msgid "Workstation"
-msgstr "Канфігурацыя"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Распрацоўка"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, fuzzy, c-format
-msgid "Graphical Environment"
-msgstr "Абалонка"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Асабісты выбар пакетаў"
-
-#: help.pm:146 help.pm:588
-#, fuzzy, c-format
-msgid "Upgrade"
-msgstr "Аркады"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr ""
-
-#: help.pm:146
-#, fuzzy, c-format
-msgid "With basic documentation"
-msgstr "Аўтэнтыфікацыя"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr ""
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-
-#: help.pm:180
-#, fuzzy, c-format
-msgid "Automatic dependencies"
-msgstr "Аўтаматычнае вызначэнне"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Настройка"
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Ваш сістэмны гадзіннік усталяваны на GMT?"
-
-#: help.pm:217
-#, fuzzy, c-format
-msgid "Automatic time synchronization"
-msgstr "Аўтаматычнае вызначэнне"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Выкарыстоўваць незанятую прастору"
-
-#: help.pm:374
-#, fuzzy, c-format
-msgid "Use existing partition"
-msgstr "Выкарыстоўваць існуючы раздзел"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Сцёрці дадзеныя на ўсім дыску"
-
-#: help.pm:374
-#, fuzzy, c-format
-msgid "Remove Windows"
-msgstr "Выдаліць Windows™"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr ""
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-
-#: help.pm:409
-#, fuzzy, c-format
-msgid "Generate auto-install floppy"
-msgstr "Стварэнне дыскеты для ўсталявання"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, fuzzy, c-format
-msgid "Replay"
-msgstr "Граць"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Аўтаматычны"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, fuzzy, c-format
-msgid "Save packages selection"
-msgstr "Асабісты выбар пакетаў"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "прылада"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Усталёўка"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-
-#: help.pm:458
-#, fuzzy, c-format
-msgid "Security Administrator"
-msgstr "Сістэмнае адміністраваньне"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr ""
-
-#: help.pm:530
-#, fuzzy, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Звычайны рэжым"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-
-#: help.pm:647
-#, fuzzy, c-format
-msgid "Espanol"
-msgstr "Эсперанто:"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr ""
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr ""
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: help.pm:722
-#, fuzzy, c-format
-msgid "authentication"
-msgstr "Аўтэнтыфікацыя"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr ""
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr ""
-
-#: help.pm:765
-#, fuzzy, c-format
-msgid "Expert"
-msgstr "/Графік"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, fuzzy, c-format
-msgid "Sound card"
-msgstr "Праграма гуказапісу"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, fuzzy, c-format
-msgid "Timezone"
-msgstr "Тэма"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr ""
-
-#: help.pm:855
-#, fuzzy, c-format
-msgid "ISDN card"
-msgstr "Унутраная ISDN карта"
-
-#: help.pm:855
-#, fuzzy, c-format
-msgid "Graphical Interface"
-msgstr "Запуск X пры старце сістэмы"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Сетка"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, fuzzy, c-format
-msgid "Proxies"
-msgstr "Проксі"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Узровень бясьпекі"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Усталяванне загрузчыку"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Сэрвісы"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Далей ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- прылада"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: install_any.pm:406
-#, fuzzy, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Ці ёсць у вас іншы?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, fuzzy, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr "Ці ёсць у вас %s інтэрфейс?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (http)"
-msgstr "Сетка"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (ftp)"
-msgstr "Сетка"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr ""
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, fuzzy, c-format
-msgid "No device found"
-msgstr "Няма значкі"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr ""
-
-#: install_any.pm:489
-#, fuzzy, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Немагчыма адчыніць файл %s\n"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr ""
-
-#: install_any.pm:558
-#, fuzzy, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Не знойздены праграмы\n"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Змяніце ваш Cd-Rom!\n"
-"Калі ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод і націсніце Ок "
-"пасля."
-
-#: install_any.pm:738
-#, fuzzy, c-format
-msgid "Copying in progress"
-msgstr "Стварэньне меню ўжо запушчана"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Памылка чытання файлу %s"
-
-#: install_any.pm:1559
-#, fuzzy, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Наступныя пакеты будуць даданы да сістэмы"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Памылка: для стварэння новых файлавых сістэмаў не знайдзены адпаведныя \n"
-"прылады. Праверце абсталяванне для пошуку імавернай прычыны."
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr ""
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, fuzzy, c-format
-msgid "NFS"
-msgstr "ФС"
-
-#: install_any.pm:1666
-#, fuzzy, c-format
-msgid "Please choose a media"
-msgstr "Калі ласка выбярыце відарыс відэа"
-
-#: install_any.pm:1698
-#, fuzzy, c-format
-msgid "Bad media %s"
-msgstr "Загружаецца файл %s"
-
-#: install_any.pm:1710
-#, fuzzy, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Файл ужо йснуе. Перапісаць?"
-
-#: install_any.pm:1761
-#, fuzzy, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Дадаць раздзел немагчыма"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr ""
-
-#: install_gtk.pm:136
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "Інфармацыя аб памяці"
-
-#: install_gtk.pm:139
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Пэўнае абсталяванне патрабуе камерцыйных драйвераў для працы.\n"
-"Часткова інфармацыю пра іх можна атрымаць тут: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Вы павінны мець каранёвы раздзел.\n"
-"Для гэтага стварыце раздзел (альбо адзначце ўжо існуючы).\n"
-"Потым абярыце ‟Кропка манціравання” і ўстанавіце яе ў ‛/’"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Няма раздзела swap.\n"
-"\n"
-"Усё адно працягваць?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr ""
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Выкарыстоўваць існуючы раздзел"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Няма існуючых раздзелаў, якія можна выкарыстаць"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Выкарыстоўваць раздзел Windows для віртуальнай файлавай сістэмы"
-
-#: install_interactive.pm:117
-#, fuzzy, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Памеры якога раздзела вы жадаеце змяніць?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Выбар памераў"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Каранёвы раздзел ў Мб: "
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Памер swap раздзелу ў Мб:"
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Памеры якога раздзела вы жадаеце змяніць?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"У праграмы змены памераў раздзела FAT не атрымалася\n"
-"апрацаваць Ваш раздзел, памылка: %s"
-
-#: install_interactive.pm:156
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Ваш раздзел з Windows занадта фрагментаваны. \n"
-"Рэкамендуем спачатку запусціць праграму ‟defrag”"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Якую прастору захаваць для Windows?"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "Раздзел %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Вылічэнне межаў файлавай сістэмы Windows"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Аўтазмяненне памераў не атрымалася для раздзелу FAT %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Выдаліць Windows™"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "На які з маючыхся жорсткіх дыскаў Вы жадаеце ўсталяваць Linux?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Усе існуючыя раздзелы на дыску %s і дадзеныя на іх будуць страчаны"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Выкарыстоўваць fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Вы можаце цяпер разбіць ваш дыск %s\n"
-"Па заканчэнні не забудзьцеся захаваць змяненні, скарыстаўшы ‛w’"
-
-#: install_interactive.pm:271
-#, fuzzy, c-format
-msgid "I can not find any room for installing"
-msgstr "Дадаць раздзел немагчыма"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Майстар падрыхтоўкі раздзелаў DrakX знайшоў наступныя варыянты:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Падрыхтоўка разделаў не ўдалася: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Далучэнне да сеткі"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Адлучэнне ад сеткі"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Дубляванне пункту манціравання %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Некаторыя важныя пакеты не былі ўсталяваны карэктна.\n"
-"Другі ваш cdrom дыск ці ваш cdrom маюць дэфекты.\n"
-"Праверце cdrom на вашым кампутары, выкарыстоўваючы\"rpm -qpl media/main/*.rpm"
-"\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Пераход на крок ‛%s’\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Выбар групы пакетаў"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Агульны памер: %d / %d Мб"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Дрэнны пакет"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Вэрсія: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Памер: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr ""
-
-#: install_steps_gtk.pm:298
-#, fuzzy, c-format
-msgid "Importance: "
-msgstr "важна"
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Вы не можаце вылучаць і адмяняць вылучэнне гэтага пакету"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr ""
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr ""
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr ""
-
-#: install_steps_gtk.pm:338
-#, fuzzy, c-format
-msgid "in order to keep %s"
-msgstr "Уласьцівасьці акна"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"Вы не можаце выбраць гэты пакет, таму як не хапае месца для яго ўсталявання"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Наступныя пакеты будуць даданы да сістэмы"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Наступныя пакеты будуць выдалены"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Гэта абавязковы пакет, яго вылучэнне нельга адмяніць"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Ён ужо ўсталяваны"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Гэты пакет павінен быць абноўлены\n"
-"Вы ўпэўнены, што хочаце адмяніць вылучэнне?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Яго патрэбна абнавіць"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: install_steps_gtk.pm:389
-#, fuzzy, c-format
-msgid "Load/Save selection"
-msgstr "Перанесьці вылучэньне"
-
-#: install_steps_gtk.pm:390
-#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "Асабісты выбар пакетаў"
-
-#: install_steps_gtk.pm:395
-#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "Ахоўнік экрану"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Выбар пакетаў для ўсталявання"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Усталёўваем"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Чакаецца"
-
-#: install_steps_gtk.pm:481
-#, fuzzy, c-format
-msgid "No details"
-msgstr "Падрабязнасці"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Засталося часу "
-
-#: install_steps_gtk.pm:496
-#, fuzzy, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Падрыхтоўка ўсталяваньня"
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d пакетаў"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Усталяванне пакету %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Адказаць"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, fuzzy, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Змяніце ваш Cd-Rom!\n"
-"\n"
-"Калі ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод і націсніце Ок "
-"пасля.\n"
-"Калі вы не маеце яго, націсніце Адмяніць, каб адмяніць усталяванне з гэтага "
-"Cd."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Усё роўна працягваць?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, fuzzy, c-format
-msgid "not configured"
-msgstr "Настроіць панэль"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Ліцэнзійная дамова"
-
-#: install_steps_interactive.pm:89
-#, fuzzy, c-format
-msgid "Release Notes"
-msgstr "Калі ласка, пачакайце"
-
-#: install_steps_interactive.pm:119
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Калі ласка, абярыце тып клавіятуры."
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr ""
-
-#: install_steps_interactive.pm:151
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Усталёўваем"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr ""
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr ""
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr ""
-
-#: install_steps_interactive.pm:185
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Порт мышы"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr ""
-
-#: install_steps_interactive.pm:207
-#, fuzzy, c-format
-msgid "Button 2 Emulation"
-msgstr "Калькулятар"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Настройка карт PCMCIA ..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Настройка IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "няма даступных раздзелаў"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Абярыце пункты манціравання"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Выбар раздзелаў для фарматавання"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Праверыць на наяўнасць дрэнных блокаў?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Не хапае месца ў буферы падкачкі (swap) для ўсталявання, павялічце яго."
-
-#: install_steps_interactive.pm:393
-#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Прагляд даступных пакетаў"
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Прагляд даступных пакетаў"
-
-#: install_steps_interactive.pm:397
-#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Вы не можаце адмяніць вылучэнне гэтага пакету. Ён ужо ўсталяваны"
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Пошук пакетаў для абнаўлення"
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Выбар люстра для атрымання пакетаў"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Ваша сістэма не мае дастакова месца для ўсталявання ці абнаўлення (%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Загрузка"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Захаваць"
-
-#: install_steps_interactive.pm:505
-#, fuzzy, c-format
-msgid "Bad file"
-msgstr "Загрузка файла"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr ""
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Усё"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Калі вы маеце ўсе CD дыскі са спіса ніжэй, націсніце Ок.\n"
-"Калі вы не маеце ані воднага з гэтых CD дыскаў, націсніце Адмяніць.\n"
-"Калі некаторых з CD дыскаў не маеце, адмяніце іх выдзяленне і націсніце Ок."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom пазначаны \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Падрыхтоўка ўсталяваньня"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Усталяванне пакету %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Настройка пасля ўсталявання"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Сувязь з люрам для атрымання спісу даступных пакетаў"
-
-#: install_steps_interactive.pm:844
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Немагчыма адчыніць файл %s\n"
-
-#: install_steps_interactive.pm:844
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Дрэнны выбар, паспрабуйце яшче\n"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Які ваш часавы пояс?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: install_steps_interactive.pm:883
-#, fuzzy, c-format
-msgid "NTP Server"
-msgstr "NIS сэервер:"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Агульныя зьвесткі"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Сістэма"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Абсталяваньне"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Аддалены сэервер CUPS"
-
-#: install_steps_interactive.pm:984
-#, fuzzy, c-format
-msgid "No printer"
-msgstr "Імя друкаркі"
-
-#: install_steps_interactive.pm:1026
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Ці ёсць у вас іншы?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-
-#: install_steps_interactive.pm:1050
-#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "Запуск X пры старце сістэмы"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Сеткавы інтэрфейс"
-
-#: install_steps_interactive.pm:1073
-#, fuzzy, c-format
-msgid "configured"
-msgstr "Настроіць панэль"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Бясьпека"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr ""
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "выключаны"
-
-#: install_steps_interactive.pm:1112
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Манітор"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s на %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: install_steps_interactive.pm:1140
-#, fuzzy, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Меню не было захавана. Ці сапраўды вы жадаеце выйсці?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Падрыхтоўка загрузчыка"
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Вы жадаеце выкарыстоўваць aboot?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Памылка ўсталявання aboot, \n"
-"спрабаваць усталёўваць, негледзячы на магчымасць парушэння першага разделу?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Устаўце дыскету ў дыскавод %s"
-
-#: install_steps_interactive.pm:1294
-#, fuzzy, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Устаўце дыскету ў дыскавод %s"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Стварэнне дыскеты для ўсталявання"
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Некаторыя крокі не завершаны.\n"
-"Вы сапраўды жадаеце выйсці зараз?"
-
-#: install_steps_interactive.pm:1324
-#, fuzzy, c-format
-msgid "Generate auto install floppy"
-msgstr "Стварэнне дыскеты для ўсталявання"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> паміж элементамі  |  <Space> выбар  | <F12> наступны экран "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Выбар файла"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Дадаць"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Зьмяненьне"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Выдаліць"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Простые"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Скончыць"
-
-#: interactive/newt.pm:92
-#, fuzzy, c-format
-msgid "Do"
-msgstr "Зроблена"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Дрэнны выбар, паспрабуйце яшче\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ваш выбар? (змоўчанне %s) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: interactive/stdio.pm:70
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ваш выбар? (змоўчанне %s) "
-
-#: interactive/stdio.pm:94
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Клявіша %d:"
-
-#: interactive/stdio.pm:95
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "Вы жадаеце выкарыстоўваць aboot?"
-
-#: interactive/stdio.pm:104
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ваш выбар? (змоўчанне %s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr ""
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Чешскі (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Нямецкі"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Іспанскі"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Фінскі"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Французскі"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Нарвежскі"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Польскі"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Рускі"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Швецкі"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "UK клавіятура"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "US клавіятура"
-
-#: keyboard.pm:185
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Албанская:"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Армянскі (стары)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Армянскі (typewriter)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Армянскі (фанетычны)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr ""
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Азербайджанскі (latin)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Бельгійскі"
-
-#: keyboard.pm:192
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Армянскі (typewriter)"
-
-#: keyboard.pm:193
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Бельгійскі"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Балгарскі (фанетычны)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Балгарскі (БДС)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Бразільскі (ABNT-2)"
-
-#: keyboard.pm:197
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Румынская:"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Беларускі"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Швейцарскі (Нямецкая раскладка)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Швейцарскі (Французская раскладка)"
-
-#: keyboard.pm:204
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Харвацкі"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Чешскі (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Нямецкі (няма заблакіраваных клавіш)"
-
-#: keyboard.pm:209
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Авангард"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Дацкі"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:213
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Нарвежскі)"
-
-#: keyboard.pm:215
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Нарвежскі)"
-
-#: keyboard.pm:217
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Нарвежскі)"
-
-#: keyboard.pm:220
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:221
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:222
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Румынская:"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Эстонскі"
-
-#: keyboard.pm:227
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Грэчаскі"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Грузінскі (\"Руская\" раскладка)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Грузінскі (\"Лацінская\" раскладка)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Грэчаскі"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr ""
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr ""
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr ""
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Харвацкі"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Мадьярскі"
-
-#: keyboard.pm:237
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Ірландская:"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Іўрыт"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Іўрыт (фанетычны)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Іранскі"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Ісландскі"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Італьянскі"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr ""
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Японскі 106 клавіш"
-
-#: keyboard.pm:249
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Панама"
-
-#: keyboard.pm:252
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "UK клавіятура"
-
-#: keyboard.pm:254
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Армянскі (фанетычны)"
-
-#: keyboard.pm:255
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "UK клавіятура"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Лаціна-Амерыканскі"
-
-#: keyboard.pm:258
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Лаціна"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Літоўскі AZERTY (стары)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Літоўскі AZERTY (новы)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Літоўскі \"нумар радка\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Літоўскі \"фанетычны\" QWERTY"
-
-#: keyboard.pm:264
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Латвійская:"
-
-#: keyboard.pm:265
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Малазыя"
-
-#: keyboard.pm:266
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Македонія"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr ""
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr ""
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr ""
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr ""
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Галандскі"
-
-#: keyboard.pm:273
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Опера"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Польскі (стандартная раскладка)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Польскі (qwertz раскладка)"
-
-#: keyboard.pm:277
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Польскі"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Партугальскі"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Канадскі (Квебэк)"
-
-#: keyboard.pm:282
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Румынская:"
-
-#: keyboard.pm:283
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Румынская:"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Рускі (фанетычны)"
-
-#: keyboard.pm:286
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Dvorak (Нарвежскі)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr ""
-
-#: keyboard.pm:289
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Тайская клавіятура"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Славенскі"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Славацкі (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Славацкі (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr ""
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr ""
-
-#: keyboard.pm:299
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Армянскі (фанетычны)"
-
-#: keyboard.pm:300
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Такелаў"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr ""
-
-#: keyboard.pm:303
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Армянскі (typewriter)"
-
-#: keyboard.pm:304
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Тайская клавіятура"
-
-#: keyboard.pm:305
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Тайская клавіятура"
-
-#: keyboard.pm:307
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Тайская клавіятура"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Тайская клавіятура"
-
-#: keyboard.pm:315
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Нямецкі"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Турэцкі (традыцыёная \"F\" мадэль)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Турэцкі (сучасная \"Q\" мадэль)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Украінскі"
-
-#: keyboard.pm:322
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Опера"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US клавіятура (міжнародная)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr ""
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Вьетнамскі \"нумар радка\" QWERTY"
-
-#: keyboard.pm:328
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Азербайджанскі (latin)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr ""
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr ""
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:342
-#, fuzzy, c-format
-msgid "\"Menu\" key"
-msgstr "Рэдактар мэню"
-
-#: keyboard.pm:343
-#, fuzzy, c-format
-msgid "Left \"Windows\" key"
-msgstr "Паводзіны вокнаў"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr ""
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr ""
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr ""
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr ""
-
-#: keyboard.pm:350
-#, fuzzy, c-format
-msgid "Left Control key"
-msgstr "Кантролер гучнасьці"
-
-#: keyboard.pm:351
-#, fuzzy, c-format
-msgid "Right Control key"
-msgstr "Кантролер гучнасьці"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Андора"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Злучаныя Арабскія Эміраты"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Афганістан"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Анцігуа і Барбуда"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Ангулла"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Альбанія"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Арменія"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Нідэрлянская Анцілія"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Ангола"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Антарктыка"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Аргенціна"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Амэрыканскае Самоа"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Аруба"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Азарбаджан"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Босьнія й Герцэгавіна"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Барбадос"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Бангладэш"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Буркіна Хвасо"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Баўгарыя"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Бахрэйн"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Бурундзі"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Бенін"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Бермуды"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Брунэі Дурасалям"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Балівія"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Багамы"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Бутан"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Выспа Боўвіт"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Батсвана"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Беларусь"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Беліз"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Какосавыя выспы"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Цэнтральная Афрыканская Рэспубліка"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr ""
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Котэ дэ Інворэ"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Выспы Кука"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Чылі"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Камэрун"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Кітай"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Калюмбія"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Сэрбія і Чарнагорыя"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Куба"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Капа Вэрдэ"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Выспа Расства"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Кіпар"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Джыботу"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Дамініка"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Дамініканская Рэспубліка"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Альджыр"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Эквадор"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Эгіпэт"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Заходняя Сахара"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Эрытрыя"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Эпіопія"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Хвіджі"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr ""
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Мікранэзыян"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Выспы Фаро"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Габон"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Злучанае Каралеўства"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Грэнада"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Грузыя"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Француская Гвіяна"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Гана"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Гібралтар"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Грынляндыя"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Гамбія"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Гвінея"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Гвадэлупа"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Экватарыяльная Гвінэя"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr ""
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Гватэмала"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Гуам"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Гвінэя-Бісаў"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Гайяна"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr ""
-
-#: lang.pm:287
-#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Выспы Паўночнае Мар'яны"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Гандурас"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Харватыя"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Гаіці"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Інданэзыя"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Індыя"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Брытанская тэрыторыя Індыйскага акіяна"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Ірак"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Іран"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Ісьляндыя"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Ямайка"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Іярданія"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Кенія"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Кыргізтан"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Камбоджа"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Кірыбаці"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Камарас"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Паўночная Карэя"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Карэя"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Кувэйт"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Кайманавыя выспы"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Казахстан"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Лаос"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Лібанон"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Санта Лючыя"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Ліхтэнштайн"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Шры Ланка"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Лібэрыя"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Лісота"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Жамойція"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Люксембург"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Лівонія"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Лібія"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Марока"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Манака"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Малдова"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Мадагаскар"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Маршалавы выспы"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Македонія"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Малі"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Маянмар"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Манголія"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Выспы Паўночнае Мар'яны"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Марцінік"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Маўрытанія"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Мансэрат"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Мальта"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Марыціўс"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Мальды"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Маляві"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Мэксыка"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Малазыя"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Мазамбік"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Намібія"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Новая Калядонія"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Нігер"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Норфалскія выспы"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Нігерыя"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Нікарагуа"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Нэпал"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Наўру"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Ню"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Аман"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Панама"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Перу"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Француская Палінэзыя"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Папуа Новая Гвінэя"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Хвіліпіны"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Пакістан"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr ""
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Паткаірн"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Пуэрта Рыка"
-
-#: lang.pm:369
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Панэль"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Парагвай"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Палаў"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Катар"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Перааб'яднаньне"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Румынія"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Руанда"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Савудаўская Арабія"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Саламонавы выспы"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Сейшэлы"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Судан"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Сынгапур"
-
-#: lang.pm:384
-#, fuzzy, c-format
-msgid "Saint Helena"
-msgstr "Санта Лючыя"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Славенія"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "С'ера Ліонэ"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "Сан Марына"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Сенегал"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Самалі"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Сарынам"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Саа Тамэ й Прынсыпэ"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "Эль Сальвадор"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Сырыя"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Швазіланд"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Выспы Таркс і Кайкас"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Чад"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "Паўднёвыя Францускія Тэрыторыі"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Тога"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Такжыкістан"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Такелаў"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Усходні Тымор"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Туркменістан"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Тунісія"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Тонга"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Турцыя"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Трынідад і Табага"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Тувалю"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Танзаныя"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Украіна"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Уганда"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Няістотна блізкія да Злучаных штатаў выспы"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Уругвай"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Узбэкістан"
-
-#: lang.pm:419
-#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Латвійская:"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr ""
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Венэсуэла"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr ""
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Уэтнам"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Ванааці"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr ""
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Самоа"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Йемен"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Майотэ"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Замбія"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Зімбабве"
-
-#: lang.pm:1073
-#, fuzzy, c-format
-msgid "You should install the following packages: %s"
-msgstr "Праблемы з усталяваннем пакету %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Сардэчна запрашаем у %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Манціраванне дыску %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr ""
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Парамэтры"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, fuzzy, c-format
-msgid "NONE"
-msgstr "Той сама GNOME"
-
-#: modules/interactive.pm:22
-#, fuzzy, c-format
-msgid "Module configuration"
-msgstr "Настройка IDE"
-
-#: modules/interactive.pm:22
-#, fuzzy, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Тут Вы можаце настроіць зьнешні выгляд панэлі"
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Знойдзены %s інтэрфейсы"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Ці ёсць у вас іншы?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ці ёсць у вас %s інтэрфейс?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Гл. апісанне абсталявання"
-
-#: modules/interactive.pm:82
-#, fuzzy, c-format
-msgid "Installing driver for USB controller"
-msgstr "Усталяванне драйверу для %s карты %s"
-
-#: modules/interactive.pm:83
-#, fuzzy, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Усталяванне драйверу для %s карты %s"
-
-#: modules/interactive.pm:84
-#, fuzzy, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Усталяванне драйверу для %s карты %s"
-
-#: modules/interactive.pm:85
-#, fuzzy, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Усталяванне драйверу для %s карты %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Усталяванне драйверу для %s карты %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(модуль %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Вы не можаце задаць опцыі модулю %s.\n"
-"Опцыі - у фармаце ‟імя=значэнне імя2=значэнне2 ...”.\n"
-"Напрыклад, ‟io=0x300 irq=7”"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Опцыі модулю:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Які драйвер %s паспрабаваць?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"У некаторых выпадках %s драйверу патрэбна некаторая дадатковая інфармацыя,\n"
-"але звычайна гэта не патрабуецца. Ці не жадаеце вы задаць для яго\n"
-"дадатковыя опцыі, ці дазволіце драйверу пратэсціраваць машыну\n"
-"ў пошуках неабходнай інфармацыі? Магчыма, тэсціраванне прывядзе\n"
-"да спынення камп'ютэру, але яно нічога не сапсуе."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Аўтапошук"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Пазначце параметры"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Загрузка модулю %s не прайшла.\n"
-"Жадаеце паспрабаваць з іншымі параметрамі?"
-
-#: modules/parameters.pm:49
-#, fuzzy, c-format
-msgid "a number"
-msgstr "Нумар запісу"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr ""
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Фарматаванне раздзелаў"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Мыш"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Стандартны"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, fuzzy, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Звычайная мыш з 2 кнопкамі"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Аўтаматычна"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:47 mouse.pm:79
-#, fuzzy, c-format
-msgid "1 button"
-msgstr "3 кнопкі"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Звычайная мыш з 2 кнопкамі"
-
-#: mouse.pm:50 mouse.pm:59
-#, fuzzy, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Звычайная мыш з 3 кнопкамі"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "З колам"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "паслядоўная"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Звычайная мыш з 3 кнопкамі"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, fuzzy, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:66
-#, fuzzy, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (паслядоўная, стары тып C7)"
-
-#: mouse.pm:72
-#, fuzzy, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Mouse (паслядоўная, стары тып C7)"
-
-#: mouse.pm:74
-#, fuzzy, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:77
-#, fuzzy, c-format
-msgid "busmouse"
-msgstr "Няма мышы"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 кнопкі"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 кнопкі"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Агульнае"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr ""
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "няма"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Няма мышы"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr ""
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
-
-#: mouse.pm:563
-#, fuzzy, c-format
-msgid "To activate the mouse,"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "Рушце колам мышы!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "выкарыстоўваць PPPoE"
-
-#: network/adsl.pm:20
-#, fuzzy, c-format
-msgid "use PPTP"
-msgstr "выкарыстоўваць PPPoE"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr ""
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr ""
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr ""
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr ""
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr ""
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Далучэнне да Інтэрнэту"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, fuzzy, c-format
-msgid "ADSL connection type:"
-msgstr "Дзеяньні"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, fuzzy, c-format
-msgid "Web Server"
-msgstr "Сервак"
-
-#: network/drakfirewall.pm:17
-#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Імя дамену"
-
-#: network/drakfirewall.pm:22
-#, fuzzy, c-format
-msgid "SSH server"
-msgstr "X сэервер"
-
-#: network/drakfirewall.pm:27
-#, fuzzy, c-format
-msgid "FTP server"
-msgstr "X сэервер"
-
-#: network/drakfirewall.pm:32
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Сервак"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr ""
-
-#: network/drakfirewall.pm:42
-#, fuzzy, c-format
-msgid "Telnet server"
-msgstr "X сэервер"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, fuzzy, c-format
-msgid "CUPS server"
-msgstr "Аддалены сэервер CUPS"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr ""
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr ""
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
-
-#: network/drakfirewall.pm:200
-#, fuzzy, c-format
-msgid "Other ports"
-msgstr "Парты вываду:"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Не вядома"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, fuzzy, c-format
-msgid "Manual"
-msgstr "Студзень"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr ""
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Унутраная ISDN карта"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Захаваць канфігурацыю меню"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr ""
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr ""
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr ""
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr ""
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr ""
-
-#: network/netconnect.pm:155
-#, fuzzy, c-format
-msgid "Bewan modem"
-msgstr "Рэжым злучэння"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr ""
-
-#: network/netconnect.pm:160
-#, fuzzy, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: network/netconnect.pm:161
-#, fuzzy, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Канфігурацыя"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr ""
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr ""
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr ""
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr ""
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr ""
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr ""
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr ""
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr ""
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr ""
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "на аснове скрыпту"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "на аснове тэрміналу"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, fuzzy, c-format
-msgid "PAP/CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, fuzzy, c-format
-msgid "Network & Internet Configuration"
-msgstr "Канфігурацыя сеткі"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr ""
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr ""
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr ""
-
-#: network/netconnect.pm:304
-#, fuzzy, c-format
-msgid "LAN connection"
-msgstr "Дзеяньні"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, fuzzy, c-format
-msgid "Wireless connection"
-msgstr "Канфігурацыя"
-
-#: network/netconnect.pm:306
-#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "Дзеяньні"
-
-#: network/netconnect.pm:307
-#, fuzzy, c-format
-msgid "Cable connection"
-msgstr "Размеркаванне"
-
-#: network/netconnect.pm:308
-#, fuzzy, c-format
-msgid "ISDN connection"
-msgstr "Дзеяньні"
-
-#: network/netconnect.pm:309
-#, fuzzy, c-format
-msgid "Modem connection"
-msgstr "Размеркаванне"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Выбар раздзелаў для фарматавання"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Настройка далучэння да Інтэрнэту"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Калі ласка, запоўніце ці пазначце поле ніжэй"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ карты"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Адрасы памяці карты (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "IO карты"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 карты"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 карты"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Ваш асабісты тэлефонны нумар"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Імя правайдару, напрыклад правайдар.net"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Нумар тэлефону правайдара"
-
-#: network/netconnect.pm:358
-#, fuzzy, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "Опцыі прынтэру"
-
-#: network/netconnect.pm:359
-#, fuzzy, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "Опцыі прынтэру"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Рэжым злучэння"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, fuzzy, c-format
-msgid "Connection speed"
-msgstr "Імя злучэння"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Настройка далучэння да Інтэрнэту"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Імя для ўваходу (імя карыстальніку)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Пароль для ўваходу"
-
-#: network/netconnect.pm:382
-#, fuzzy, c-format
-msgid "Cable: account options"
-msgstr "Дазволіць тэрмін дзеяньня запісу"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, fuzzy, c-format
-msgid "Select the network interface to configure:"
-msgstr "Пазначце сеткавы інтэрфейс"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Прылада"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, fuzzy, c-format
-msgid "External ISDN modem"
-msgstr "Унутраная ISDN карта"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, fuzzy, c-format
-msgid "Select a device!"
-msgstr "Абярыце файл"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Настройка ISDN"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Які тып карты вы маеце?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Калі вы маеце ISA карту, велічыні на наступным экране павінны быць "
-"сапраўднымі.\n"
-"\n"
-"Калі вы маеце PCMCIA карту, вы павінны ведаць irq і io вашай карты.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Працягнуць"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Адмяніць"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr ""
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Драйвэр"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Які пратакол вы жадаеце выкарыстоўваць?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Пратакол"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Абярыце вашага правайдара.\n"
-"калі яго няма ў гэтым спісе, абярыце тып ‟Іншы”"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, fuzzy, c-format
-msgid "Provider:"
-msgstr "Прынтэр"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-
-#: network/netconnect.pm:573
-#, fuzzy, c-format
-msgid "Select the modem to configure:"
-msgstr "Пазначце карыстальнікаў каб аб'яднаць у гэтыю групу"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Да якога паслядоўнага порту далучаны мадэм?"
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr ""
-
-#: network/netconnect.pm:682
-#, fuzzy, c-format
-msgid "Dialup: account options"
-msgstr "Дазволіць тэрмін дзеяньня запісу"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Імя злучэння"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Нумар тэлефону"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Імя (login ID)"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, fuzzy, c-format
-msgid "Dialup: IP parameters"
-msgstr "Настроіць проксі сэрвэры"
-
-#: network/netconnect.pm:705
-#, fuzzy, c-format
-msgid "IP parameters"
-msgstr "Інтэрнэт"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP адрас"
-
-#: network/netconnect.pm:707
-#, fuzzy, c-format
-msgid "Subnet mask"
-msgstr "Маска сеткі"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr ""
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr ""
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Імя дамену"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr ""
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, fuzzy, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr ""
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Шлюз"
-
-#: network/netconnect.pm:739
-#, fuzzy, c-format
-msgid "Gateway IP address"
-msgstr "IP адрас"
-
-#: network/netconnect.pm:775
-#, fuzzy, c-format
-msgid "ADSL configuration"
-msgstr "Настройка ISDN"
-
-#: network/netconnect.pm:819
-#, fuzzy, c-format
-msgid "Please choose your ADSL provider"
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, fuzzy, c-format
-msgid "Use a floppy"
-msgstr "Захаванне на дыскету"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, fuzzy, c-format
-msgid "Use my Windows partition"
-msgstr "Вылічэнне межаў файлавай сістэмы Windows"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, fuzzy, c-format
-msgid "Do it later"
-msgstr "Аб'яднанае стэрыа"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr ""
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr ""
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr ""
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr ""
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr ""
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr ""
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr ""
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, fuzzy, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Настрйка драйверу Solaris"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Калі ласка, увядзіце IP канфігурацыю для вашай машыны.\n"
-"Кожны пункт павінен быць запоўнены як IP адрас ў дзесяткова-кропкавай \n"
-"натацыі (напрыклад, 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr ""
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Імя машыны"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Маска сеткі"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Сетка"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr ""
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, fuzzy, c-format
-msgid "Metric"
-msgstr "абмежаванне"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr ""
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Настройка далучэння да Інтэрнэту"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "IP сэервера SMB"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP адрас павінен быць у фармаце 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "IP адрас павінен быць у фармаце 1.2.3.4"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr ""
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, fuzzy, c-format
-msgid "%s already in use\n"
-msgstr "%s ужо знойдзены "
-
-#: network/netconnect.pm:1167
-#, fuzzy, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "X сэервер"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, fuzzy, c-format
-msgid "Install a new driver"
-msgstr "Усталяванне сістэмы"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr ""
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, fuzzy, c-format
-msgid "Operating Mode"
-msgstr "Рэжым злучэння"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Managed"
-msgstr "Мэнэджэр файлаў"
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Master"
-msgstr "Прайгравальнік дыскаў"
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Repeater"
-msgstr "Цыклічна"
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Secondary"
-msgstr "Нядзеля"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Аўтаматычна"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr ""
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, fuzzy, c-format
-msgid "Network ID"
-msgstr "Сетка"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr ""
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr ""
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, fuzzy, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Бітрэйт: %d kb/s"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr ""
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, fuzzy, c-format
-msgid "Fragmentation"
-msgstr "Аўтэнтыфікацыя"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Увядзіце імя сваёй машыны (host).\n"
-"Імя вашай машыны павінна быць зададзена поўнасцю,\n"
-"напрыклад ‟mybox.mylab.myco.com”.\n"
-"Вы можаце таксама ўвесці IP адрас шлюзу, калі ён у вас ёсць."
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, fuzzy, c-format
-msgid "Host name (optional)"
-msgstr "Імя машыны"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Імя машыны"
-
-#: network/netconnect.pm:1370
-#, fuzzy, c-format
-msgid "DNS server 1"
-msgstr "NIS сэервер:"
-
-#: network/netconnect.pm:1371
-#, fuzzy, c-format
-msgid "DNS server 2"
-msgstr "NIS сэервер:"
-
-#: network/netconnect.pm:1372
-#, fuzzy, c-format
-msgid "DNS server 3"
-msgstr "NIS сэервер:"
-
-#: network/netconnect.pm:1373
-#, fuzzy, c-format
-msgid "Search domain"
-msgstr "Шукаць: "
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Прылада-шлюз"
-
-#: network/netconnect.pm:1386
-#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP адрас павінен быць у фармаце 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP адрас павінен быць у фармаце 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Імя машыны"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: network/netconnect.pm:1423
-#, fuzzy, c-format
-msgid "Internet connection"
-msgstr "Сумеснае Інтэрнэт-злучэнне"
-
-#: network/netconnect.pm:1432
-#, fuzzy, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Якую канфігурацыю Xorg вы жадаеце атрымаць?"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"
-
-#: network/netconnect.pm:1478
-#, fuzzy, c-format
-msgid "Automatically at boot"
-msgstr "Аўтаматычны"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, fuzzy, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"
-
-#: network/netconnect.pm:1505
-#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Зьмяненьні не былі захаваныя. Ці жадаеце працягнуць?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Канфігурацыя сеткі"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ці жадаеце зараз паспрабаваць далучыцца да Інтэрнэту?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr ""
-
-#: network/netconnect.pm:1550
-#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Далучэнне да Інтэрнэту"
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr ""
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Настройка proxy кэшуючых сэервераў"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy павінен быць http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr ""
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Увага! Знойдзена існуючая сістэма сеткавай бяспекі (firewall). Вам магчыма "
-"спатрэбіцца скарэктаваць яе пасля ўсталявання."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-
-#: network/tools.pm:190
-#, fuzzy, c-format
-msgid "Insert floppy"
-msgstr "Усталёўка"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-
-#: network/tools.pm:196
-#, fuzzy, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Куды вы жадаеце манціраваць прыладу %s?"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "памылка манціравання: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Пашыраны раздзел не падтрымліваецца гэтай платформай"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Вы маеце дзірку ў табліцы радзелаў, але я не маю магчымасці яе скарыстаць.\n"
-"Адзіны выхад у тым, каб перамясціць першасныя раздзелы так, каб дзірка ішла\n"
-"адразу за пашыраным (extended) раздзелам"
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Аднаўленне з файла %s не атрымалася: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Дрэнны файл рэзервовай копіі"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Памылка запісу ў файл %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "павінны мець"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "важна"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "вельмі добра"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "добра"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "можа быць"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "Вызначэнне прыладаў..."
-
-#: printer/cups.pm:103
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(модуль %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr ""
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, fuzzy, c-format
-msgid "Configured on other machines"
-msgstr "Настроіць панэль"
-
-#: printer/cups.pm:117
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Аддалены сэервер CUPS"
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Па дамаўленню)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr ""
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr ""
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr ""
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr ""
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr ""
-
-#: printer/data.pm:152
-#, fuzzy, c-format
-msgid "Remote CUPS"
-msgstr "Аддалены сэервер CUPS"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, fuzzy, c-format
-msgid "Unknown Model"
-msgstr "Невядомая гукавая карта"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Лакальны прынтэр"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Аддалены прынтэр"
-
-#: printer/main.pm:29
-#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Аддалены сэервер CUPS"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Сервер друку"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Сеткавы прынтэр (TCP/Socket)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr ""
-
-#: printer/main.pm:33
-#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "Сервер друку"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "URI прынтэру"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr ""
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "пажадана"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, fuzzy, c-format
-msgid "Unknown model"
-msgstr "Невядомая гукавая карта"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, fuzzy, c-format
-msgid "Configured on this machine"
-msgstr "Настроіць панэль"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, fuzzy, c-format
-msgid ", USB printer #%s"
-msgstr "пашырэнне OSS %s"
-
-#: printer/main.pm:365
-#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Імя друкаркі"
-
-#: printer/main.pm:369
-#, fuzzy, c-format
-msgid ", HP printer on a parallel port"
-msgstr "Друкаркі ў выглядзе значак"
-
-#: printer/main.pm:371
-#, fuzzy, c-format
-msgid ", HP printer on USB"
-msgstr "Друкаркі ў выглядзе значак"
-
-#: printer/main.pm:373
-#, fuzzy, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr "Друкаркі ў выглядзе значак"
-
-#: printer/main.pm:375
-#, fuzzy, c-format
-msgid ", HP printer"
-msgstr "Прынтэр"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ""
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ""
-
-#: printer/main.pm:394
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Памылка запісу ў файл %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, fuzzy, c-format
-msgid "USB printer #%s"
-msgstr "пашырэнне OSS %s"
-
-#: printer/main.pm:433
-#, fuzzy, c-format
-msgid "USB printer"
-msgstr "USB прылады"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr ""
-
-#: printer/main.pm:439
-#, fuzzy, c-format
-msgid "HP printer on USB"
-msgstr "Друкаркі ў выглядзе значак"
-
-#: printer/main.pm:441
-#, fuzzy, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "Друкаркі ў выглядзе значак"
-
-#: printer/main.pm:443
-#, fuzzy, c-format
-msgid "HP printer"
-msgstr "Прынтэр"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr ""
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr ""
-
-#: printer/main.pm:462
-#, fuzzy, c-format
-msgid "Prints into %s"
-msgstr "Заданьні друку"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr ""
-
-#: printer/main.pm:481
-#, fuzzy, c-format
-msgid "Uses command %s"
-msgstr "Порт"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "Прагляд лякальнай сеткі"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Сеткавыя інтэрфэйсы"
-
-#: printer/main.pm:1185
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Сетка"
-
-#: printer/main.pm:1187
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Хост:"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr ""
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:67
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Настройка прылд OSS"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
-
-#: printer/printerdrake.pm:82
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Адлучэнне ад сеткі"
-
-#: printer/printerdrake.pm:84
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Канфігурацыя"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Выкарыстаць выдалены хост"
-
-#: printer/printerdrake.pm:100
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "Дадатковае праграмаванне:"
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr ""
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: printer/printerdrake.pm:123
-#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Настройка далучэння да Інтэрнэту"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Укл."
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Выкл"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Лакальны прынтэр"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:179
-#, fuzzy, c-format
-msgid "Edit selected host/network"
-msgstr "Рэдагаваць вылучаны радок"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr ""
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr ""
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-
-#: printer/printerdrake.pm:358
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Дадаць карыстальніка"
-
-#: printer/printerdrake.pm:364
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "Рэдагаваць вылучаны радок"
-
-#: printer/printerdrake.pm:373
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "/Выдаліць/Выбранае"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Порт"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, fuzzy, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Сервер друку"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr ""
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Прынтэр"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr ""
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr ""
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Выбар тыпу злучэння прынтэру"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Як прынтар далучаны?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, fuzzy, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Зрух мусіць быць станоўчым цэлым лікам!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr ""
-
-#: printer/printerdrake.pm:697
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Імя друкаркі"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr ""
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr ""
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:733
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-
-#: printer/printerdrake.pm:774
-#, fuzzy, c-format
-msgid "Searching for new printers..."
-msgstr "Адшукаць файлы на дыску"
-
-#: printer/printerdrake.pm:833
-#, fuzzy, c-format
-msgid "Found printer on %s..."
-msgstr "Аддалены прынтэр"
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr ""
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Опцыі прынтэру"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "Які тып карты вы маеце?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: printer/printerdrake.pm:875
-#, fuzzy, c-format
-msgid "Configuring printer on %s..."
-msgstr "Настройка карт PCMCIA ..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Настройка карт PCMCIA ..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Дадаць новы пункт"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr ""
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "Аўтаматычнае вызначэнне"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr ""
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Опцыі прынтэру"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Вызначэнне прыладаў..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1252
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Выдаліць вылучаны радок"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr ""
-
-#: printer/printerdrake.pm:1263
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Сеткавы прынтэр (TCP/Socket)"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1347
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Лакальны прынтэр"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr ""
-
-#: printer/printerdrake.pm:1361
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Імя друкаркі"
-
-#: printer/printerdrake.pm:1369
-#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Лакальны прынтэр"
-
-#: printer/printerdrake.pm:1370
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Даступныя праграмы"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr ""
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1393
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr ""
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, fuzzy, c-format
-msgid "Aborting"
-msgstr "Адмяніць"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Опцыі аддаленага прынтэру lpd"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-
-#: printer/printerdrake.pm:1477
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "Выкарыстаць выдалены хост"
-
-#: printer/printerdrake.pm:1478
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "Аддалены прынтэр"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1485
-#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Аддалены прынтэр"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Інфармацыя"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr ""
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Сервер друку"
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Опцыі прынтэру SMB (Windows 9x/NT)"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "Імя сэерверу SMB"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP сэервера SMB"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Імя для размеркаванага рэсурсу"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Працоўная група"
-
-#: printer/printerdrake.pm:1666
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Аўтаматычны"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Опцыі прынтэру NetWare"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Сервер друку"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Імя чаргі друку"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1913
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Опцыі прынтэру NetWare"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr ""
-
-#: printer/printerdrake.pm:2012
-#, fuzzy, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Аднавіць сьпіс"
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "URI прынтэру"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr ""
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Загадны радок"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, fuzzy, c-format
-msgid "HPLIP"
-msgstr "PL_IP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr ""
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Усталяванне пакету %s..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, fuzzy, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr "Немагчыма стварыць тэчку наладак gnome для карыстальніка \"%s\": %s\n"
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:2277
-#, fuzzy, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "На які сектар перанесці?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Усталяванне пакету %s"
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Усталяванне пакету %s"
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2509
-#, fuzzy, c-format
-msgid "Configuring device..."
-msgstr "Настройка IDE"
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr ""
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Імя друкаркі"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Апісанне"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Размеркаванне"
-
-#: printer/printerdrake.pm:2810
-#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Падрыхтоўка загрузчыка"
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr ""
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Гэта дакладна?"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Пазначыць карыстальніцкі ID"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr ""
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, fuzzy, c-format
-msgid "Floppy Disk"
-msgstr "Фарматаваць гнуткія дыскі"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, fuzzy, c-format
-msgid "Other place"
-msgstr "Іншае"
-
-#: printer/printerdrake.pm:3039
-#, fuzzy, c-format
-msgid "Select PPD file"
-msgstr "Абярыце файл"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr ""
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr ""
-
-#: printer/printerdrake.pm:3060
-#, fuzzy, c-format
-msgid "Installing PPD file..."
-msgstr "Усталёўваем"
-
-#: printer/printerdrake.pm:3178
-#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Настройка прылд OSS"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Настройка proxy кэшуючых сэервераў"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-
-#: printer/printerdrake.pm:3245
-#, fuzzy, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Канфігурацыя сеткі"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3268
-#, fuzzy, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Настройка драйверу Sun"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3295
-#, fuzzy, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Канфігурацыя"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: printer/printerdrake.pm:3589
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Опцыі прынтэру"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-
-#: printer/printerdrake.pm:3672
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Гульня \"Сапёр\" для Gnome"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr ""
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Друк"
-
-#: printer/printerdrake.pm:3703
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "Стандартны"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: printer/printerdrake.pm:3709
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "Друк тэставых старонак"
-
-#: printer/printerdrake.pm:3711
-#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "Друк тэставых старонак"
-
-#: printer/printerdrake.pm:3715
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Друк тэставых старонак"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Друк тэставых старонак"
-
-#: printer/printerdrake.pm:3743
-#, fuzzy, c-format
-msgid "Skipping photo test page."
-msgstr "Друк тэставых старонак"
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3774
-#, fuzzy, c-format
-msgid "Did it work properly?"
-msgstr "Сеткавы проксі"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "Лакальны прынтэр"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Адлучэнне ад сеткі"
-
-#: printer/printerdrake.pm:3897
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Адлучэнне ад сеткі"
-
-#: printer/printerdrake.pm:3903
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Опцыі прынтэру"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, fuzzy, c-format
-msgid " - Print head alignment\n"
-msgstr "Гарызантальнае раўнаньне"
-
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "Канфігурацыя"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Настройка драйверу Sun"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Перадача"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: printer/printerdrake.pm:4077
-#, fuzzy, c-format
-msgid "New printer name"
-msgstr "Сеткавы інтэрфейс"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr ""
-
-#: printer/printerdrake.pm:4111
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Пачатковы сектар:"
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Настройка сеткі"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr ""
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: printer/printerdrake.pm:4160
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Далучэнне да сеткі"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr ""
-
-#: printer/printerdrake.pm:4237
-#, fuzzy, c-format
-msgid "high"
-msgstr "Высокі"
-
-#: printer/printerdrake.pm:4237
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Паранаідальны"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr ""
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr ""
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4310
-#, fuzzy, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Немагчыма выдаліць тэг!"
-
-#: printer/printerdrake.pm:4330
-#, fuzzy, c-format
-msgid "Installing %s..."
-msgstr "Усталёўваем"
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr ""
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#: printer/printerdrake.pm:4418
-#, fuzzy, c-format
-msgid "Name or IP of remote server:"
-msgstr "Сервер друку"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr ""
-
-#: printer/printerdrake.pm:4458
-#, fuzzy, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Аддалены сэервер CUPS"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, fuzzy, c-format
-msgid "Local CUPS printing system"
-msgstr "Настройка IDE"
-
-#: printer/printerdrake.pm:4526
-#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Выбар тыпу злучэння прынтэру"
-
-#: printer/printerdrake.pm:4527
-#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Які пратакол вы жадаеце выкарыстоўваць?"
-
-#: printer/printerdrake.pm:4576
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Немагчыма выдаліць \"%s\": %s."
-
-#: printer/printerdrake.pm:4591
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "Усталёўваем"
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr ""
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: printer/printerdrake.pm:4831
-#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Канфігурацыя"
-
-#: printer/printerdrake.pm:4843
-#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Змяніць тып раздзелу"
-
-#: printer/printerdrake.pm:4852
-#, fuzzy, c-format
-msgid "Normal Mode"
-msgstr "Рэжым Mmap"
-
-#: printer/printerdrake.pm:4853
-#, fuzzy, c-format
-msgid "Expert Mode"
-msgstr "/Графік"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Опцыі прынтэру"
-
-#: printer/printerdrake.pm:5158
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "Настройка запісу на дыск"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-
-#: printer/printerdrake.pm:5165
-#, fuzzy, c-format
-msgid "This printer is disabled"
-msgstr "Памеры якога раздзела вы жадаеце змяніць?"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr ""
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "Выбар тыпу злучэння прынтэру"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr ""
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr ""
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, fuzzy, c-format
-msgid "Enable Printer"
-msgstr "Сервер друку"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, fuzzy, c-format
-msgid "Disable Printer"
-msgstr "Сервер друку"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "Друк тэставых старонак"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr ""
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Аддалены прынтэр"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr ""
-
-#: printer/printerdrake.pm:5272
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Сервер друку"
-
-#: printer/printerdrake.pm:5277
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Сервер друку"
-
-#: printer/printerdrake.pm:5314
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ці жадаеце выдаліць групу %s\n"
-
-#: printer/printerdrake.pm:5318
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Аддалены прынтэр"
-
-#: printer/printerdrake.pm:5342
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Лакальны прынтэр"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: raid.pm:42
-#, fuzzy, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Не атрымліваецца дадаць раздзел на _адфармаціраваны_ RAID md%d"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Недастаткова раздзелаў для RAID узроўня %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr ""
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr ""
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr ""
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr ""
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr ""
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr ""
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr ""
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr ""
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr ""
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-
-#: security/help.pm:80 standalone/draksec:213
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Бясьпека"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr ""
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr ""
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr ""
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr ""
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr ""
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-
-#: security/help.pm:108
-#, fuzzy, c-format
-msgid "Set the root umask."
-msgstr "Пароль для root"
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr ""
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr ""
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr ""
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr ""
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr ""
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr ""
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr ""
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr ""
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr ""
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, fuzzy, c-format
-msgid "Allow X Window connections"
-msgstr "Уласьцівасьці акна"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr ""
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr ""
-
-#: security/l10n.pm:24
-#, fuzzy, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Настройка службаў"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr ""
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr ""
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:28
-#, fuzzy, c-format
-msgid "Enable IP spoofing protection"
-msgstr "Дазволіць засцярогу ад абразання"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr ""
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr ""
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr ""
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr ""
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr ""
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr ""
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr ""
-
-#: security/l10n.pm:37
-#, fuzzy, c-format
-msgid "No password aging for"
-msgstr "Няма паролю"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-
-#: security/l10n.pm:39
-#, fuzzy, c-format
-msgid "Password history length"
-msgstr "Настроіць паролі"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr ""
-
-#: security/l10n.pm:41
-#, fuzzy, c-format
-msgid "Root umask"
-msgstr "Пароль для root"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr ""
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr ""
-
-#: security/l10n.pm:44
-#, fuzzy, c-format
-msgid "User umask"
-msgstr "Карыстальнікі"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr ""
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr ""
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr ""
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr ""
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr ""
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr ""
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr ""
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr ""
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr ""
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr ""
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr ""
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr ""
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr ""
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr ""
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr ""
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr ""
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr ""
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Сардэчна запрашаем у Crackers"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Зусім слабы"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Высокі"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Высокі"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Паранаідальны"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Гэты узровень неабходна выкарыстоўваць з асцярогай. Сістэма будзе прасцей\n"
-"у карыстанні, але і больш чутнай: гэты узровень бяспекі нельга "
-"выкарыстоўваць\n"
-"на машынах, якія далучаны да сеткі ці да Інтернет. Уваход не абаронены "
-"паролем."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Пароль зараз уключаны, але выкарыстанне камп'ютэру ў якасці сеткавага\n"
-"таксама не рэкамендавана."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-
-#: security/level.pm:55
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Пазначце параметры"
-
-#: security/level.pm:56
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: security/level.pm:60
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "Бясьпека"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr ""
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr ""
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, перыядычны камандны планавальнік."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"ampd выкарыстоўваецца для адслежвання статусу батарэі і вядзення "
-"статыстыкі.\n"
-"Яго можна выкарыстоўваць для выключэння машыны пры нізкім зарадзе батарэі."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Каманды, якія выконваюцца, фіксуюцца па камандзе і часе яе выканання\n"
-"і выконваюцца групы каманд, калі загрузка памяці ніжэй дастатковай."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron - стандартная UNIX праграма, якая выконвае праграмы карыстальніка\n"
-"праз пазначаныя перыяды часу. Vixie cron дадае рад дапаўненняў да "
-"стандартнага\n"
-"UNIX cron, уключаючы лепшы ўзровень бяспекі і моцныя канфігурацыйныя опцыі."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM дадае падтрымку мышы да праграмаў, якія працуюць у тэкставым рэжыме,\n"
-"такіх як Midnight Commander. Гэта дазваляе выкарыстоўваць мыш пры "
-"капіраванні і ўстаўцы,\n"
-"і ўключае падтрымку ўсплываючых (pop-up) меню ў тэкставым рэжыме."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - гэта World Wide Web сэервер. Ён выкарыстоўзваеца для абслугоўвання\n"
-"HTML файлаў і CGI."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Інтэрнэт суперсэервер-дэман (завецца inetd) запускае пры старце \n"
-"колькасць розных інтэрнэт службаў, якія неабходны. Яго можна выкарыстоўваць "
-"для пуску\n"
-"шматлікіх службаў, уключаючы telnet, ftp, rsh і rlogin. Блакуючы inetd, "
-"блакуем\n"
-"усе службы, за якія ён адказвае."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Гэты пакет загружае абраную раскладку клавіятуры як набор з\n"
-"/etc/sysconfig/keyboard. Ёна можа быць абрана таксама з дапамогай "
-"kbdconfig.\n"
-"Вы можаце зрабіць даступнай яе для шматлікіх машынаў."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd - гэты дэман друку, патрэбны для карэктнай працы lpr. Гэта\n"
-"сэервер, які кіруе працай прынтэру(аў)."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Манціраваць і разманціраваць усе сеткавыя файлавыя сістэмы (NFS),\n"
-" SMB (Lan Manager/Windows) і NCP (Netware) пункты манціравання."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Актывізаваць/дэактывізаваць усе сеткавыя інтэрфейсы, сканфігураваныя для\n"
-"старту пры загрузцы сістэмы."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS - гэта вядомы пратакол для доступу да файлаў праз TCP/IP сеткі.\n"
-"Гэтая служба забяспечваецца NFS сэерверам, які канфігурыруеца праз\n"
-"/etc/exports файл."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS -  гэта вядомы пратакол для доступу да файлаў праз TCP/IP\n"
-"сеткі. Гэтая служба ўплывае на наяўнасць сувязі паміж NFS файламі."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"Падтрымка PCMCIA - гэта звычайна падтрымка такіх рэчаў, як Ethernet і\n"
-"мадэмы ў наўтбуках. Вам няма неабходнасці канфігураваць іх, калі на вашай\n"
-"машыне іх няма, ці яна не наўтбук."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper (аглядальнік партоў) кіруе RPC злучэннямі, якія звычайна\n"
-"выкарыстоўваюцца такімі пратаколамі як NFS і NIS. Portmap сэервер павінен "
-"выконвацца\n"
-"на машынах якія працуюць як сэерверы для пратаколаў, якія скарыстоўваюць RPC."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Захаваць і аднавіць сістэмны энтрапійны пул для высокай якасці\n"
-"генерацыі выпадковых лікаў."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Дэман маршрутызацыі дазваляе дынамічным табліцам IP маршрутызацыі\n"
-"аднаўляцца праз RIP пратакол. RIP выкарыстоўваецца ў малых сетках, больш\n"
-"складаныя пратаколы маршрутызацыі - у вялікіх сетках."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Пратакол rstat дазваляе карыстальнікам сеткі атрымліваць\n"
-"памеры нагрузкі для кожнай машыны сеткі."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Пратакол rusers дазваляе карыстальнікам сеткі вызначаць, хто\n"
-"ўвайшоў і працуе на машынах ў сетцы."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"Пратакол rwho дае магчымасць карыстальнікам атрымаць спіс ўсіх\n"
-"карыстальнікаў, увайшоўшых на машыну, выканаў rwho дэман (падобны на finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr ""
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog - гэта сродак, з дапамогай якога многія дэманы запісваюць "
-"паведамленні\n"
-"ў розныя файлы статыстыкі. Гэта вельмі добра для агляду працы розных службаў."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr ""
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Абярыце, якія сервісы запускаць аўтаматычна пры загрузцы"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Друкаваньне"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Інтэрнэт"
-
-#: services.pm:131
-#, fuzzy, c-format
-msgid "File sharing"
-msgstr "Мэнэджэр файлаў"
-
-#: services.pm:138
-#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Сістэмнае адміністраваньне"
-
-#: services.pm:146
-#, fuzzy, c-format
-msgid "Database Server"
-msgstr "Праграма гуказапісу"
-
-#: services.pm:209
-#, fuzzy, c-format
-msgid "running"
-msgstr "Увага!"
-
-#: services.pm:209
-#, fuzzy, c-format
-msgid "stopped"
-msgstr "Далучыць"
-
-#: services.pm:213
-#, fuzzy, c-format
-msgid "Services and daemons"
-msgstr "Мэнэджэр сэрвісаў"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Інфармацыя"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr ""
-
-#: services.pm:227
-#, fuzzy, c-format
-msgid "On boot"
-msgstr "Yaboot"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "У пачатак"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Спыніць"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr ""
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Сардэчна запрашаем у <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr ""
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr ""
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr ""
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr ""
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr ""
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "Цэнтар кіраваньня"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr ""
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr ""
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr ""
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr ""
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr ""
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Кантакт</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, fuzzy, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "Інтэрнэт"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr ""
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr ""
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr ""
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr ""
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr ""
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr ""
-
-#: share/advertising/19.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Environments</b>"
-msgstr "Распрацоўка"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Editors</b>"
-msgstr "Распрацоўка"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-
-#: share/advertising/21.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Languages</b>"
-msgstr "Распрацоўка"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr ""
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr ""
-
-#: share/advertising/21.pl:22
-#, fuzzy, c-format
-msgid "\t* Scripting languages:"
-msgstr "Мэнэджэр друку"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr ""
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr ""
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr ""
-
-#: share/advertising/22.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Tools</b>"
-msgstr "Распрацоўка"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr ""
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr ""
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, fuzzy, c-format
-msgid "<b>Servers</b>"
-msgstr "Сервак"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr ""
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "Цэнтар кіраваньня"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr ""
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr ""
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr ""
-
-#: share/advertising/28.pl:15
-#, fuzzy, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "Цэнтар кіраваньня"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr ""
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "Цэнтар кіраваньня"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "Цэнтар кіраваньня"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, fuzzy, c-format
-msgid "Office Workstation"
-msgstr "Працоўныя мейсцы"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Офісныя праграмы: працэсары словаў (OpenOffice.org Writer, Kword), "
-"электроныя табліцы, аглядальнікі pdf-файлаў, і г.д."
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Офісныя праграмы: працэсары словаў (kword, abiword), электроныя табліцы, "
-"аглядальнікі pdf-файлаў, і г.д."
-
-#: share/compssUsers.pl:33
-#, fuzzy, c-format
-msgid "Game station"
-msgstr "Аўтэнтыфікацыя"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Забаўляльныя праграмы: аркады, стратэгіі і г.д."
-
-#: share/compssUsers.pl:37
-#, fuzzy, c-format
-msgid "Multimedia station"
-msgstr "Мульцімедыя"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Рэдактары і прайгравальнікі гуку і відэа"
-
-#: share/compssUsers.pl:43
-#, fuzzy, c-format
-msgid "Internet station"
-msgstr "Інтэрнэт"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-
-#: share/compssUsers.pl:49
-#, fuzzy, c-format
-msgid "Network Computer (client)"
-msgstr "Сеткавы прынтэр (TCP/Socket)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Канфігурацыя"
-
-#: share/compssUsers.pl:55
-#, fuzzy, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ці жадаеце пратэсціраваць настройкі?"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Кансольныя інструментальныя сродкі"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Рэдактары, абалонкі, тэрміналы"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Бібліятэкі і праграмы для распрацоўкі на С і С++"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Дакумэнтацыя"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "нігі і Howto па Linux і Free Software"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr ""
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr ""
-
-#: share/compssUsers.pl:85
-#, fuzzy, c-format
-msgid "Apache"
-msgstr "Шлях:"
-
-#: share/compssUsers.pl:88
-#, fuzzy, c-format
-msgid "Groupware"
-msgstr "Групы"
-
-#: share/compssUsers.pl:89
-#, fuzzy, c-format
-msgid "Kolab Server"
-msgstr "NIS сэервер:"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, fuzzy, c-format
-msgid "Firewall/Router"
-msgstr "Рэстарт"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, fuzzy, c-format
-msgid "Internet gateway"
-msgstr "Інтэрнэт"
-
-#: share/compssUsers.pl:96
-#, fuzzy, c-format
-msgid "Mail/News"
-msgstr "/Файл/_Стварыць"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr ""
-
-#: share/compssUsers.pl:100
-#, fuzzy, c-format
-msgid "Directory Server"
-msgstr "Каталог %s Так"
-
-#: share/compssUsers.pl:104
-#, fuzzy, c-format
-msgid "FTP Server"
-msgstr "NIS сэервер:"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr ""
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr ""
-
-#: share/compssUsers.pl:109
-#, fuzzy, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Імя дамену"
-
-#: share/compssUsers.pl:112
-#, fuzzy, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Сервер друку"
-
-#: share/compssUsers.pl:113
-#, fuzzy, c-format
-msgid "NFS Server, Samba server"
-msgstr "X сэервер"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "База даньняў"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr ""
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr ""
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr ""
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Пошта"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr ""
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: share/compssUsers.pl:137
-#, fuzzy, c-format
-msgid "Network Computer server"
-msgstr "Сеткавыя інтэрфэйсы"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: share/compssUsers.pl:146
-#, fuzzy, c-format
-msgid "KDE Workstation"
-msgstr "Канфігурацыя"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment - асноўнае графічнае асяродзе з калекцыяй "
-"інструментальных сродкаў"
-
-#: share/compssUsers.pl:151
-#, fuzzy, c-format
-msgid "GNOME Workstation"
-msgstr "Інфармацыя аб памяці"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Графічнае асяродзе са зручным дзеля выкарыстання наборам прыкладанняў і  "
-"інструментальных сродкаў"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Іншыя графічныя Працоўныя сталы"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Карыснасьці"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS сэервер:"
-
-#: share/compssUsers.pl:186
-#, fuzzy, c-format
-msgid "Webmin"
-msgstr "Прылады"
-
-#: share/compssUsers.pl:187
-#, fuzzy, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Сістэмнае адміністраваньне"
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Канфігурацыя сеткі"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, fuzzy, c-format
-msgid "Mandriva Wizards"
-msgstr "Цэнтар кіраваньня"
-
-#: share/compssUsers.pl:197
-#, fuzzy, c-format
-msgid "Wizards to configure server"
-msgstr "Немагчыма выдаліць \"%s\": %s."
-
-#: standalone.pm:21
-#, fuzzy, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"Пашырэнне ESounD\n"
-"\n"
-" Гэта прога - бясплатнае праграмнае забяспячэнне; вы можыце распаўсюджываць "
-"і/альбо мадыфікаваць яго\n"
-"у адпаведнасці з ліцэнзыяй GNU, якая была надрукавана\n"
-"Арганізацыяй бясплатнага праграмнага забеспячэння, вы можыце карыстацца "
-"версыяй 2 ліцэнзыі альбо\n"
-"(па вашаму жаданню) ці якой іншай пазнейшай версыяй.\n"
-"\n"
-"Гэта прога распаўсюджываецца з надзеяй, што камусці яна будзе карысна,\n"
-"але БЯЗЬ УСЯЛЯКІХ ГАРАНТЫЙ нават гарантый якія маюцца на ўвазе пры\n"
-"ПРАЦАЗДОЛЬНАСЦІ альбо ПРЫГОДНАСЦІ ДА ЯКОЙСЦІ МЭТЫ. Калі ласка,\n"
-"за падрабязнасцямі глянце на GNU ліцэнзыю.\n"
-"\n"
-"А копію ліцэнзыі вы павінны былі атрымаць\n"
-"разам зь гэтай прогай; калі не, дык напішыце пра гэта па адрасу (дашлем)\n"
-"Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
-"02111-1307,\n"
-"USA."
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-
-#: standalone.pm:96
-#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Клавіятура"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-
-#: standalone/XFdrake:61
-#, fuzzy, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Каб змяненні ўступілі ў дзеянне, необходна перазагрузіцца"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Калі ласка, выйдзіце, а потым скарыстайце Ctrl-Alt-BackSpace"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr ""
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, fuzzy, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: параметр ‛%s’ патрабуе аргумент\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-
-#: standalone/drakTermServ:130
-#, fuzzy, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: параметр ‛%s’ патрабуе аргумент\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, fuzzy, c-format
-msgid "Terminal Server Configuration"
-msgstr "Сістэмнае адміністраваньне"
-
-#: standalone/drakTermServ:221
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Сервер друку"
-
-#: standalone/drakTermServ:227
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Сервер друку"
-
-#: standalone/drakTermServ:233
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS сэервер:"
-
-#: standalone/drakTermServ:239
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "Праграма гуказапісу"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr ""
-
-#: standalone/drakTermServ:259
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Дадаць карыстальніка"
-
-#: standalone/drakTermServ:263
-#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "Калькулятар"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Выявы"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr ""
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, fuzzy, c-format
-msgid "Cancel Wizard"
-msgstr "Адмена"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr ""
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr ""
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr ""
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, fuzzy, c-format
-msgid "Done!"
-msgstr "Зроблена"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, fuzzy, c-format
-msgid "Terminal Server Overview"
-msgstr "Сістэмнае адміністраваньне"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr ""
-
-#: standalone/drakTermServ:668
-#, fuzzy, c-format
-msgid "Boot ISO"
-msgstr "Манітор"
-
-#: standalone/drakTermServ:670
-#, fuzzy, c-format
-msgid "PXE Image"
-msgstr "Вобраз"
-
-#: standalone/drakTermServ:731
-#, fuzzy, c-format
-msgid "Default kernel version"
-msgstr "Скура Па ўмаўчанні"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
-
-#: standalone/drakTermServ:771
-#, fuzzy, c-format
-msgid "No kernel selected!"
-msgstr "Няма вузла каб выдаліць"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr ""
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
-
-#: standalone/drakTermServ:796
-#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Знішчыць"
-
-#: standalone/drakTermServ:801
-#, fuzzy, c-format
-msgid "No image selected!"
-msgstr "Няма вузла каб выдаліць"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr ""
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-
-#: standalone/drakTermServ:938
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Дадаць карыстальніка"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr ""
-
-#: standalone/drakTermServ:980
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Тып: "
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr ""
-
-#: standalone/drakTermServ:1014
-#, fuzzy, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: standalone/drakTermServ:1042
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "Калькулятар"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr ""
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr ""
-
-#: standalone/drakTermServ:1062
-#, fuzzy, c-format
-msgid "type: fat"
-msgstr "Тып: "
-
-#: standalone/drakTermServ:1063
-#, fuzzy, c-format
-msgid "type: thin"
-msgstr "Тып: "
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr ""
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr ""
-
-#: standalone/drakTermServ:1079
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "Калькулятар"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr ""
-
-#: standalone/drakTermServ:1112
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "Выдаліць пункт"
-
-#: standalone/drakTermServ:1121
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Настройка IDE"
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr ""
-
-#: standalone/drakTermServ:1231
-#, fuzzy, c-format
-msgid "Subnet:"
-msgstr "Сіні"
-
-#: standalone/drakTermServ:1238
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Маска сеткі"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr ""
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr ""
-
-#: standalone/drakTermServ:1266
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Імя дамену"
-
-#: standalone/drakTermServ:1274
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS сэервер:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr ""
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "Канфігурацыя"
-
-#: standalone/drakTermServ:1346
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr ""
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr ""
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
-
-#: standalone/drakTermServ:1524
-#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Дыскавод недаступны"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr ""
-
-#: standalone/drakTermServ:1532
-#, fuzzy, c-format
-msgid "Error writing %s/%s"
-msgstr "Памылка запісу ў файл %s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr ""
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr ""
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr ""
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr ""
-
-#: standalone/drakTermServ:1742
-#, fuzzy, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "Сістэмнае адміністраваньне"
-
-#: standalone/drakTermServ:1759
-#, fuzzy, c-format
-msgid "Deleted %s...\n"
-msgstr "Выдаліць"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr ""
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Памылка!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr ""
-
-#: standalone/drakautoinst:41
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Настройка пасля ўсталявання"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-
-#: standalone/drakautoinst:60
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Граць"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, fuzzy, c-format
-msgid "manual"
-msgstr "Студзень"
-
-#: standalone/drakautoinst:64
-#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Канфігурацыя MIDI"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Стварэнне дыскеты для ўсталявання"
-
-#: standalone/drakautoinst:90
-#, fuzzy, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Устаўце дыскету ў дыскавод %s"
-
-#: standalone/drakautoinst:91
-#, fuzzy, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Стварэнне дыскеты для ўсталявання"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Прыміце віншаванні!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: standalone/drakautoinst:289
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Усталёўка"
-
-#: standalone/drakautoinst:358
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Дадаць атрыбут"
-
-#: standalone/drakautoinst:365
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "/Выдаліць дохлыя файлы"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr ""
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-
-#: standalone/drakbackup:480
-#, fuzzy, c-format
-msgid "Old user list:\n"
-msgstr "Атрымаць спіс сервакоў"
-
-#: standalone/drakbackup:482
-#, fuzzy, c-format
-msgid "New user list:\n"
-msgstr "Атрымаць спіс сервакоў"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr ""
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-
-#: standalone/drakbackup:612
-#, fuzzy, c-format
-msgid "Cannot spawn %s."
-msgstr "Немагчыма зачыніць каталёг: %s"
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
-
-#: standalone/drakbackup:630
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Няма паролю"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
-
-#: standalone/drakbackup:632
-#, fuzzy, c-format
-msgid "Can not find %s on %s"
-msgstr "Не знойздены праграмы\n"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr ""
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr ""
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr ""
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
-
-#: standalone/drakbackup:826
-#, fuzzy, c-format
-msgid "No tape in %s!"
-msgstr "Дапаўненьні"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr ""
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Дрэнны файл рэзервовай копіі"
-
-#: standalone/drakbackup:1023
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Зададзена карыстальнікам..."
-
-#: standalone/drakbackup:1057
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Дрэнны файл рэзервовай копіі"
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr ""
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-
-#: standalone/drakbackup:1123
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr ""
-"Памылка аналіза\n"
-" канфігурацыйнага файла."
-
-#: standalone/drakbackup:1153
-#, fuzzy, c-format
-msgid "Can not create catalog!"
-msgstr "Немагчыма запісаць тэг!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr ""
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, fuzzy, c-format
-msgid "Use Incremental Backups"
-msgstr "Інструмэнтальны Рок"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr ""
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-
-#: standalone/drakbackup:1458
-#, fuzzy, c-format
-msgid "Do not include the browser cache"
-msgstr "Настроіць проксі сэрвэры"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr ""
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "/Выдаліць/Выбранае"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Карыстальнікі"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr ""
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr ""
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr ""
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr ""
-
-#: standalone/drakbackup:1610
-#, fuzzy, c-format
-msgid "Host name or IP."
-msgstr "Імя машыны"
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Запомніць гэты пароль"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr ""
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr ""
-
-#: standalone/drakbackup:1742
-#, fuzzy, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Выберыце ваш стыль меню :"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr ""
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr ""
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr ""
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr ""
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr ""
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr ""
-
-#: standalone/drakbackup:1768
-#, fuzzy, c-format
-msgid "DVDRAM device"
-msgstr "CD-ROM прылада"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr ""
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr ""
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr ""
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr ""
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr ""
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr ""
-
-#: standalone/drakbackup:1944
-#, fuzzy, c-format
-msgid "Enter the directory to save to:"
-msgstr "Выбраць каталог для дадатку"
-
-#: standalone/drakbackup:1948
-#, fuzzy, c-format
-msgid "Directory to save to"
-msgstr "Каталог %s Так"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr ""
-
-#: standalone/drakbackup:2029
-#, fuzzy, c-format
-msgid "HardDrive / NFS"
-msgstr "Мальды"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, fuzzy, c-format
-msgid "hourly"
-msgstr "Кантры"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, fuzzy, c-format
-msgid "daily"
-msgstr "Электронная пошта"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, fuzzy, c-format
-msgid "monthly"
-msgstr "Месяц"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "карыстальнік"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Студзень"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Люты"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Сакавік"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "Красавік"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Травень"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Чэрвень"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Ліпень"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Жнівень"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Верасень"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Кастрычнік"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Лістапад"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Сьнежань"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Нядзеля"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Панядзелак"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Аўторак"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Серада"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Чацьвер"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Пятніца"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Субота"
-
-#: standalone/drakbackup:2096
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Імя карыстальніка"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr ""
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Хвіліна"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Гадзіна"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Дзень"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Месяц"
-
-#: standalone/drakbackup:2127
-#, fuzzy, c-format
-msgid "Weekday"
-msgstr "Серада"
-
-#: standalone/drakbackup:2133
-#, fuzzy, c-format
-msgid "Please choose the media for backup."
-msgstr "Калі ласка, абярыце тып клавіятуры."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-
-#: standalone/drakbackup:2188
-#, fuzzy, c-format
-msgid "Please choose the compression type"
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: standalone/drakbackup:2192
-#, fuzzy, c-format
-msgid "Use .backupignore files"
-msgstr "Дрэнны файл рэзервовай копіі"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, fuzzy, c-format
-msgid "SMTP server for mail:"
-msgstr "Інфармацыя аб X-сэрвэры"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr ""
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Дзе"
-
-#: standalone/drakbackup:2264
-#, fuzzy, c-format
-msgid "When"
-msgstr "З колам"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Болей выбараў"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr ""
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Канфігурацыя"
-
-#: standalone/drakbackup:2318
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, fuzzy, c-format
-msgid "Across Network"
-msgstr "Сетка"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, fuzzy, c-format
-msgid "On Tape Device"
-msgstr "USB прылады"
-
-#: standalone/drakbackup:2367
-#, fuzzy, c-format
-msgid "Backup Users"
-msgstr "Карыстальнікі групы"
-
-#: standalone/drakbackup:2368
-#, fuzzy, c-format
-msgid " (Default is all users)"
-msgstr " (Па дамаўленню)"
-
-#: standalone/drakbackup:2381
-#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: standalone/drakbackup:2382
-#, fuzzy, c-format
-msgid "Backup System"
-msgstr "Сыстэма"
-
-#: standalone/drakbackup:2384
-#, fuzzy, c-format
-msgid "Select user manually"
-msgstr "Пазначыць карыстальніцкі ID"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr ""
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: standalone/drakbackup:2486
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr "Сыстэма"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr ""
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr ""
-
-#: standalone/drakbackup:2504
-#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Мыш: %s\n"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr ""
-
-#: standalone/drakbackup:2506
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"%s\n"
-"Немагчыма адчыніць файл: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: standalone/drakbackup:2513
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Опцыі:"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr ""
-
-#: standalone/drakbackup:2520
-#, fuzzy, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "Дрэнны файл рэзервовай копіі"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-
-#: standalone/drakbackup:2526
-#, fuzzy, c-format
-msgid "\t-Hard drive.\n"
-msgstr "Мальды"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr ""
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr ""
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: standalone/drakbackup:2531
-#, fuzzy, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "Сеткавы проксі"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr ""
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr ""
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr ""
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:2731
-#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr ""
-
-#: standalone/drakbackup:2883
-#, fuzzy, c-format
-msgid "         Restore Configuration       "
-msgstr "Канфігурацыя"
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr ""
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr ""
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr ""
-
-#: standalone/drakbackup:3031
-#, fuzzy, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Выберыце каталог у якім будзе захоўвацца MPEG:"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr ""
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr ""
-
-#: standalone/drakbackup:3091
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Іншыя"
-
-#: standalone/drakbackup:3096
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Усталяванне сістэмы"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr ""
-
-#: standalone/drakbackup:3098
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Рэстарт"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr ""
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr ""
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-
-#: standalone/drakbackup:3197
-#, fuzzy, c-format
-msgid "Search Backups"
-msgstr "Шукаць: "
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr ""
-
-#: standalone/drakbackup:3219
-#, fuzzy, c-format
-msgid "Restore Selected"
-msgstr "/Выдаліць/Выбранае"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-
-#: standalone/drakbackup:3369
-#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "/Выдаліць/Выбранае"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr ""
-
-#: standalone/drakbackup:3459
-#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Выдаліць з RAID"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr ""
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Назва вузла"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr ""
-
-#: standalone/drakbackup:3493
-#, fuzzy, c-format
-msgid "Password required"
-msgstr "Настроіць паролі"
-
-#: standalone/drakbackup:3499
-#, fuzzy, c-format
-msgid "Username required"
-msgstr "Імя карыстальніку:"
-
-#: standalone/drakbackup:3502
-#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Імя машыны"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr ""
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr ""
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr ""
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr ""
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, fuzzy, c-format
-msgid "Search for files to restore"
-msgstr "Адшукаць файлы на дыску"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr ""
-
-#: standalone/drakbackup:3774
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Па выбару"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr ""
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr ""
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr ""
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr ""
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr ""
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr ""
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr ""
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr ""
-
-#: standalone/drakbackup:3972
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Чорны"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Аднавіць"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Наступныя пакеты будуць даданы да сістэмы"
-
-#: standalone/drakbackup:4120
-#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Пазначце ня менш адной групы для карыстальніка"
-
-#: standalone/drakbackup:4160
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Дрэнны файл рэзервовай копіі"
-
-#: standalone/drakbackup:4163
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Дрэнны файл рэзервовай копіі"
-
-#: standalone/drakbackup:4166
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Дрэнны файл рэзервовай копіі"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr ""
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr ""
-
-#: standalone/drakbackup:4198
-#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Вызначэнне прыладаў..."
-
-#: standalone/drakbackup:4268
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Завершана аднаўленьне канфігурацыі меню"
-
-#: standalone/drakbackup:4273
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Канфігурацыя сеткі"
-
-#: standalone/drakbackup:4299
-#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Канфігурацыя"
-
-#: standalone/drakbackup:4304
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Канфігурацыя"
-
-#: standalone/drakbackup:4309
-#, fuzzy, c-format
-msgid "View Configuration"
-msgstr "Канфігурацыя"
-
-#: standalone/drakbackup:4313
-#, fuzzy, c-format
-msgid "View Last Log"
-msgstr "Відэа"
-
-#: standalone/drakbackup:4318
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Чорны"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, fuzzy, c-format
-msgid "Drakbackup"
-msgstr "Чорны"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Файл"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Файл/_Выйсьці"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-
-#: standalone/drakboot:127
-#, fuzzy, c-format
-msgid "Do you want to configure it now?"
-msgstr "Ці жадаеце пратэсціраваць настройкі?"
-
-#: standalone/drakboot:136
-#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Усталяванне сістэмы"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr ""
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Тэма"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-
-#: standalone/drakboot:151
-#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Стварыць новага карыстальніка"
-
-#: standalone/drakboot:183
-#, fuzzy, c-format
-msgid "Default user"
-msgstr "Па ўмаўчанні (%s)"
-
-#: standalone/drakboot:184
-#, fuzzy, c-format
-msgid "Default desktop"
-msgstr "Скура Па ўмаўчанні"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr ""
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: standalone/drakboot:195
-#, fuzzy, c-format
-msgid "System mode"
-msgstr "Сыстэмнае меню"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, fuzzy, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Дастасаваньне для кіраваньня карыстальнікамі Mandriva Linux"
-
-#: standalone/drakbug:46
-#, fuzzy, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Цэнтар кіраваньня"
-
-#: standalone/drakbug:48
-#, fuzzy, c-format
-msgid "Synchronization tool"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Кансольныя інструментальныя сродкі"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr ""
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr ""
-
-#: standalone/drakbug:52
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "Рэдактар мэню"
-
-#: standalone/drakbug:53
-#, fuzzy, c-format
-msgid "Msec"
-msgstr "Мыш"
-
-#: standalone/drakbug:54
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Кантролер гучнасьці"
-
-#: standalone/drakbug:55
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Мэнэджэр сэрвісаў"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr ""
-
-#: standalone/drakbug:57
-#, fuzzy, c-format
-msgid "Windows Migration tool"
-msgstr "Уласьцівасьці акна"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr ""
-
-#: standalone/drakbug:59
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Канфігурацыя"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr ""
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-
-#: standalone/drakbug:85
-#, fuzzy, c-format
-msgid "Find Package"
-msgstr "Пэйджэр"
-
-#: standalone/drakbug:87
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Пэйджэр"
-
-#: standalone/drakbug:88
-#, fuzzy, c-format
-msgid "Kernel:"
-msgstr "Імя"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-
-#: standalone/drakbug:106
-#, fuzzy, c-format
-msgid "Report"
-msgstr "Цыклічна"
-
-#: standalone/drakbug:163
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Заканчэнне ўсталявання"
-
-#: standalone/drakbug:175
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Выбар пакетаў"
-
-#: standalone/drakclock:29
-#, fuzzy, c-format
-msgid "DrakClock"
-msgstr "Рок"
-
-#: standalone/drakclock:39
-#, fuzzy, c-format
-msgid "not defined"
-msgstr "Настроіць панэль"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr ""
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr ""
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr ""
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Ваш сістэмны гадзіннік усталяваны на GMT?"
-
-#: standalone/drakclock:75
-#, fuzzy, c-format
-msgid "Network Time Protocol"
-msgstr "Сеткавы інтэрфейс"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr ""
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Сэрвэр:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Скінуць"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-
-#: standalone/drakconnect:86
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Канфігурацыя сеткі"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Шлюз:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Інтэрфэйс:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr ""
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Інтэрфэйс"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Стан"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Імя машыны: "
-
-#: standalone/drakconnect:136
-#, fuzzy, c-format
-msgid "Configure hostname..."
-msgstr "Настройка IDE"
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, fuzzy, c-format
-msgid "LAN configuration"
-msgstr "Настройка ISDN"
-
-#: standalone/drakconnect:155
-#, fuzzy, c-format
-msgid "Configure Local Area Network..."
-msgstr "Настройка сеткі"
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Применить"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr ""
-
-#: standalone/drakconnect:225
-#, fuzzy, c-format
-msgid "Device selected"
-msgstr "/Выдаліць/Выбранае"
-
-#: standalone/drakconnect:307
-#, fuzzy, c-format
-msgid "IP configuration"
-msgstr "Канфігурацыя"
-
-#: standalone/drakconnect:346
-#, fuzzy, c-format
-msgid "DNS servers"
-msgstr "CDDB сервакі"
-
-#: standalone/drakconnect:354
-#, fuzzy, c-format
-msgid "Search Domain"
-msgstr "NIS Domain"
-
-#: standalone/drakconnect:362
-#, fuzzy, c-format
-msgid "static"
-msgstr "Антарктыка"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr ""
-
-#: standalone/drakconnect:526
-#, fuzzy, c-format
-msgid "Flow control"
-msgstr "Кантроль гуку"
-
-#: standalone/drakconnect:527
-#, fuzzy, c-format
-msgid "Line termination"
-msgstr "Памеры і арыентацыя"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr ""
-
-#: standalone/drakconnect:542
-#, fuzzy, c-format
-msgid "Use lock file"
-msgstr "Абярыце файл"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr ""
-
-#: standalone/drakconnect:547
-#, fuzzy, c-format
-msgid "Busy wait"
-msgstr "Калі ласка, пачакайце"
-
-#: standalone/drakconnect:552
-#, fuzzy, c-format
-msgid "Modem sound"
-msgstr "Запісаць гукавы кліп"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Уключыць"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Выключыць"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr ""
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, fuzzy, c-format
-msgid "Module name"
-msgstr "Назва файла"
-
-#: standalone/drakconnect:606
-#, fuzzy, c-format
-msgid "Mac Address"
-msgstr "Адрасная кніга"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Прац."
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr ""
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ні водны ethernet сеткавы адаптар у вашай сістэме не вызначаны. Калі ласка, "
-"скарыстайце канфігурацыйны інструмэнт."
-
-#: standalone/drakconnect:715
-#, fuzzy, c-format
-msgid "Remove a network interface"
-msgstr "Пазначце сеткавы інтэрфейс"
-
-#: standalone/drakconnect:719
-#, fuzzy, c-format
-msgid "Select the network interface to remove:"
-msgstr "Пазначце сеткавы інтэрфейс"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr ""
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr ""
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr ""
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, fuzzy, c-format
-msgid "up"
-msgstr "Скокнуць"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr ""
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Далучаны"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Адлучаны"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr ""
-
-#: standalone/drakconnect:814
-#, fuzzy, c-format
-msgid "Connect..."
-msgstr "Настройка IDE"
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr ""
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr ""
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: standalone/drakconnect:896
-#, fuzzy, c-format
-msgid "LAN Configuration"
-msgstr "Канфігурацыя"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr ""
-
-#: standalone/drakconnect:917
-#, fuzzy, c-format
-msgid "Boot Protocol"
-msgstr "Пратакол"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr ""
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, fuzzy, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Пазначце сеткавы інтэрфейс"
-
-#: standalone/drakconnect:1017
-#, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "Настройка далучэння да Інтэрнэту"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr ""
-
-#: standalone/drakconnect:1057
-#, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "Настройка далучэння да Інтэрнэту"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr ""
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, fuzzy, c-format
-msgid "Connection type: "
-msgstr "Імя злучэння"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Стан:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, fuzzy, c-format
-msgid "XDM (X Display Manager)"
-msgstr "Мэнэджэр файлаў"
-
-#: standalone/drakedm:55
-#, fuzzy, c-format
-msgid "Choosing a display manager"
-msgstr "Мэнэджэр файлаў"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-
-#: standalone/drakedm:79
-#, fuzzy, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Куды вы жадаеце манціраваць прыладу %s?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, fuzzy, c-format
-msgid "drakfloppy"
-msgstr "Захаванне на дыскету"
-
-#: standalone/drakfloppy:78
-#, fuzzy, c-format
-msgid "Boot disk creation"
-msgstr "Настройка IDE"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Агульныя"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Прылада"
-
-#: standalone/drakfloppy:88
-#, fuzzy, c-format
-msgid "Kernel version"
-msgstr "Канфігурацыя"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Усталяваньні"
-
-#: standalone/drakfloppy:117
-#, fuzzy, c-format
-msgid "Advanced preferences"
-msgstr "Адмысловыя ўсталяваньні"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Памер"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr ""
-
-#: standalone/drakfloppy:141
-#, fuzzy, c-format
-msgid "force"
-msgstr "Усталяваньні"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr ""
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr ""
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr ""
-
-#: standalone/drakfloppy:147
-#, fuzzy, c-format
-msgid "Add a module"
-msgstr "Дадаць карыстальніка"
-
-#: standalone/drakfloppy:156
-#, fuzzy, c-format
-msgid "Remove a module"
-msgstr "/Выдаліць дохлыя файлы"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: standalone/drakfloppy:300
-#, fuzzy, c-format
-msgid "Unable to fork: %s"
-msgstr "Немагчыма адчыніць файл %s\n"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr ""
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr ""
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: standalone/drakfont:208
-#, fuzzy, c-format
-msgid "parse all fonts"
-msgstr "Выкарыстовываць шрыфт X"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr ""
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, fuzzy, c-format
-msgid "done"
-msgstr "Зроблена"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr ""
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: standalone/drakfont:261
-#, fuzzy, c-format
-msgid "Could not find any font.\n"
-msgstr "Не знойздены праграмы\n"
-
-#: standalone/drakfont:271
-#, fuzzy, c-format
-msgid "Search for fonts in installed list"
-msgstr "Адшукаць файлы на дыску"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr ""
-
-#: standalone/drakfont:325
-#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "Шрыфты"
-
-#: standalone/drakfont:328
-#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Падрыхтоўка ўсталяваньня"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr ""
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr ""
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
-
-#: standalone/drakfont:364
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "Рэстарт"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: standalone/drakfont:422
-#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "Рэстарт"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, fuzzy, c-format
-msgid "DrakFont"
-msgstr "Шрыфт"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Сьпіс шрыфтоў"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Даведка"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, fuzzy, c-format
-msgid "Uninstall"
-msgstr "Усталёўка"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Імпарт"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-
-#: standalone/drakfont:520
-#, fuzzy, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Пашырэнне ESounD\n"
-"\n"
-" Гэта прога - бясплатнае праграмнае забяспячэнне; вы можыце распаўсюджываць "
-"і/альбо мадыфікаваць яго\n"
-"у адпаведнасці з ліцэнзыяй GNU, якая была надрукавана\n"
-"Арганізацыяй бясплатнага праграмнага забеспячэння, вы можыце карыстацца "
-"версыяй 2 ліцэнзыі альбо\n"
-"(па вашаму жаданню) ці якой іншай пазнейшай версыяй.\n"
-"\n"
-"Гэта прога распаўсюджываецца з надзеяй, што камусці яна будзе карысна,\n"
-"але БЯЗЬ УСЯЛЯКІХ ГАРАНТЫЙ нават гарантый якія маюцца на ўвазе пры\n"
-"ПРАЦАЗДОЛЬНАСЦІ альбо ПРЫГОДНАСЦІ ДА ЯКОЙСЦІ МЭТЫ. Калі ласка,\n"
-"за падрабязнасцямі глянце на GNU ліцэнзыю.\n"
-"\n"
-"А копію ліцэнзыі вы павінны былі атрымаць\n"
-"разам зь гэтай прогай; калі не, дык напішыце пра гэта па адрасу (дашлем)\n"
-"Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
-"02111-1307,\n"
-"USA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-
-#: standalone/drakfont:555
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Выбар раздзелаў для фарматавання"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Офіс"
-
-#: standalone/drakfont:568
-#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Клявіятура"
-
-#: standalone/drakfont:569
-#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Прынтэры"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Выбар файла"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, fuzzy, c-format
-msgid "Import fonts"
-msgstr "важна"
-
-#: standalone/drakfont:658
-#, fuzzy, c-format
-msgid "Install fonts"
-msgstr "Усталёўка"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr ""
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr ""
-
-#: standalone/drakfont:734
-#, fuzzy, c-format
-msgid "Unselected All"
-msgstr "Дадаць выбраныя файлы"
-
-#: standalone/drakfont:737
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Абярыце файл"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Выдаліць сьпіс"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr ""
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Віртуальныя працоўныя сталы"
-
-#: standalone/drakfont:756
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: standalone/drakfont:758
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Усталёўка"
-
-#: standalone/drakfont:776
-#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!"
-
-#: standalone/drakfont:777
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Заканчэнне ўсталявання"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Сумеснае Інтэрнэт-злучэнне"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr ""
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, fuzzy, c-format
-msgid "enable"
-msgstr "(дазволіць)"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, fuzzy, c-format
-msgid "reconfigure"
-msgstr "Настроіць панэль"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr ""
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr ""
-
-#: standalone/drakgw:146
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Сумеснае Інтэрнэт-злучэнне зараз магчыма"
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Сумеснае Інтэрнэт-злучэнне зараз магчыма"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, fuzzy, c-format
-msgid "disable"
-msgstr "(адмовіць)"
-
-#: standalone/drakgw:157
-#, fuzzy, c-format
-msgid "Disabling servers..."
-msgstr "Вызначэнне прыладаў..."
-
-#: standalone/drakgw:172
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена"
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: standalone/drakgw:237
-#, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Сеткавыя інтэрфэйсы"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "У вашай сістэме няма ніводнага сеткавага адаптара!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Сеткавы інтэрфейс"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Пазначце сеткавы інтэрфейс"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Калі ласка, абярыце сеткавы адаптар, які будзе выкарыстаны для далучэння да "
-"вашай лакальнай сеткі."
-
-#: standalone/drakgw:290
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Інфармацыя аб сеткавых інтэрфэйсах"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: standalone/drakgw:296
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Аўтаматычнае вызначэнне"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr ""
-
-#: standalone/drakgw:297
-#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Настройка драйверу Sun"
-
-#: standalone/drakgw:298
-#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Настройка драйверу Sun"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakgw:319
-#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "Прагляд лякальнай сеткі"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr ""
-
-#: standalone/drakgw:328
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP сэервера SMB"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr ""
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr ""
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr ""
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:334
-#, fuzzy, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Настройка IDE"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Патэнцыйны адрас ЛВС канфліктуе з бягучай канфігурацыяй %s!\n"
-
-#: standalone/drakgw:361
-#, fuzzy, c-format
-msgid "Configuring..."
-msgstr "Настройка IDE"
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Канфігурацыя сцэнараў, усталяванне ПЗ, запуск службаў..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Праблемы з усталяваннем пакету %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr ""
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-
-#: standalone/drakhelp:36
-#, fuzzy, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Цэнтар кіраваньня"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "сыстэмныя ўсталёўкі"
-
-#: standalone/drakperm:23
-#, fuzzy, c-format
-msgid "Custom settings"
-msgstr "Настройкі мышы"
-
-#: standalone/drakperm:24
-#, fuzzy, c-format
-msgid "Custom & system settings"
-msgstr "Выкарыстоўваць існуючы раздзел"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Можа рэдагавацца"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Шлях:"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Карыстальнік"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Група"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Правы доступу"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr ""
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Угору"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Уніз"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr ""
-
-#: standalone/drakperm:123
-#, fuzzy, c-format
-msgid "Add a rule"
-msgstr "Дадаць карыстальніка"
-
-#: standalone/drakperm:123
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Дадаць карыстальніка ў сыстэму"
-
-#: standalone/drakperm:124
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Выдаліць вылучаны радок"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Рэдагаваць"
-
-#: standalone/drakperm:243
-#, fuzzy, c-format
-msgid "browse"
-msgstr "Прагляд"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "карыстальнік"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "група"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "іншы"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Чытаньне"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, fuzzy, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr ""
-"%s\n"
-"Немагчыма запісаць у файл: %s"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Запіс"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, fuzzy, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr ""
-"%s\n"
-"Немагчыма запісаць у файл: %s"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Выканаць"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr ""
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr ""
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr ""
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Карыстальнік(ца):"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Група:"
-
-#: standalone/drakperm:299
-#, fuzzy, c-format
-msgid "Current user"
-msgstr "Прыняць карыстальніка"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr ""
-
-#: standalone/drakperm:310
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Дзеяньні"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Якасьць"
-
-#: standalone/drakpxe:55
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: standalone/drakpxe:111
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: standalone/drakpxe:143
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Калі ласка, пазначце сеткавы адаптар, які плануеце выкарыстоўваць для "
-"далучэння да інтэрнэт"
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr ""
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr ""
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr ""
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:192
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Слоўнік GNOME"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr ""
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr ""
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Рэжым"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Канал"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Сетка:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr ""
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Рэжым:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Шыфраваньне:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr ""
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr ""
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr ""
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr ""
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Статус"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr ""
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Аднавіць"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "на"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr ""
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr ""
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Ігнараваць"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, fuzzy, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr "Апісанне:"
-
-#: standalone/draksec:168
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr "Па ўмаўчанні - %s"
-
-#: standalone/draksec:210
-#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Бясьпека"
-
-#: standalone/draksec:217
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Сістэмнае адміністраваньне"
-
-#: standalone/draksec:219
-#, fuzzy, c-format
-msgid "Basic options"
-msgstr "Захаваць усталёўкі"
-
-#: standalone/draksec:233
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Сетка"
-
-#: standalone/draksec:233
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "Выкарыстоўваць існуючы раздзел"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr ""
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr ""
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr ""
-
-#: standalone/draksound:47
-#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Няма вузла каб выдаліць"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr ""
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr ""
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr ""
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr ""
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr ""
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Мэнэджэр тэм"
-
-#: standalone/draksplash:77
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Памеры экрану"
-
-#: standalone/draksplash:82
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Тэма"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr ""
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr ""
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr ""
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, fuzzy, c-format
-msgid "Add an UPS device"
-msgstr "Аўдыяпрылада:"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, fuzzy, c-format
-msgid "Autodetection"
-msgstr "Аўтаматычнае вызначэнне"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Стварэньне меню ўжо запушчана"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, fuzzy, c-format
-msgid "Congratulations"
-msgstr "Прыміце віншаванні!"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr ""
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr ""
-
-#: standalone/drakups:128 standalone/drakups:140
-#, fuzzy, c-format
-msgid "UPS driver configuration"
-msgstr "Настройка драйверу Sun"
-
-#: standalone/drakups:128
-#, fuzzy, c-format
-msgid "Please select your UPS model."
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr ""
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Імя:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr ""
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Порт:"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr ""
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr ""
-
-#: standalone/drakups:250
-#, fuzzy, c-format
-msgid "UPS devices"
-msgstr "USB прылады"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Назва"
-
-#: standalone/drakups:269
-#, fuzzy, c-format
-msgid "UPS users"
-msgstr "Стыль"
-
-#: standalone/drakups:285
-#, fuzzy, c-format
-msgid "Access Control Lists"
-msgstr "Акцэсуары"
-
-#: standalone/drakups:286
-#, fuzzy, c-format
-msgid "IP mask"
-msgstr "Відарысы"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Правілы"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Дзеяньні"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Узровень"
-
-#: standalone/drakups:299
-#, fuzzy, c-format
-msgid "ACL name"
-msgstr "Анімэ"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, fuzzy, c-format
-msgid "DrakUPS"
-msgstr "Dvorak (US)"
-
-#: standalone/drakups:339
-#, fuzzy, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: standalone/drakvpn:73
-#, fuzzy, c-format
-msgid "DrakVPN"
-msgstr "Dvorak"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr ""
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr ""
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr ""
-
-#: standalone/drakvpn:121
-#, fuzzy, c-format
-msgid "VPN connection currently disabled"
-msgstr "Сумеснае Інтэрнэт-злучэнне зараз забаронена"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr ""
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr ""
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr ""
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, fuzzy, c-format
-msgid "Kernel module."
-msgstr "Індыкатар гучнасьці"
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#: standalone/drakvpn:292
-#, fuzzy, c-format
-msgid "Security Policies"
-msgstr "Бясьпека"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr ""
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, fuzzy, c-format
-msgid "Configuration file"
-msgstr "Канфігурацыя"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, fuzzy, c-format
-msgid "%s entries"
-msgstr ", %s сектараў"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Фіксацыя"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr ""
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "config setup"
-msgstr "Настроіць панэль"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "conn %default"
-msgstr "Па дамаўленню"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "normal conn"
-msgstr "Інфармацыя"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, fuzzy, c-format
-msgid "Exists!"
-msgstr "Выход"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:405
-#, fuzzy, c-format
-msgid "interfaces"
-msgstr "Сеткавыя інтэрфэйсы"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr ""
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr ""
-
-#: standalone/drakvpn:408
-#, fuzzy, c-format
-msgid "plutoload"
-msgstr "загрузіць"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr ""
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr ""
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-
-#: standalone/drakvpn:451
-#, fuzzy, c-format
-msgid "PFS"
-msgstr "HFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr ""
-
-#: standalone/drakvpn:453
-#, fuzzy, c-format
-msgid "compress"
-msgstr "Gnometris"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr ""
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "зьлева"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr ""
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr ""
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr ""
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:491
-#, fuzzy, c-format
-msgid "section name"
-msgstr "Імя злучэння"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr ""
-
-#: standalone/drakvpn:493
-#, fuzzy, c-format
-msgid "auto"
-msgstr "Дзеяньні"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "зправа"
-
-#: standalone/drakvpn:500
-#, fuzzy, c-format
-msgid "rightcert"
-msgstr "Прынтэр"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr ""
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr ""
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, fuzzy, c-format
-msgid "Edit section"
-msgstr "Рэдагаваць вылучаны радок"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, fuzzy, c-format
-msgid "Section names"
-msgstr "Імя злучэння"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr ""
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, fuzzy, c-format
-msgid "Remove section"
-msgstr "Аддалены прынтэр"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, fuzzy, c-format
-msgid "path"
-msgstr "Шлях:"
-
-#: standalone/drakvpn:735
-#, fuzzy, c-format
-msgid "remote"
-msgstr "Стварыць"
-
-#: standalone/drakvpn:735
-#, fuzzy, c-format
-msgid "sainfo"
-msgstr "Інфармацыя"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr ""
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, fuzzy, c-format
-msgid "real file"
-msgstr "Абярыце файл"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr ""
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr ""
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr ""
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr ""
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr ""
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr ""
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr ""
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr ""
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, fuzzy, c-format
-msgid "Authentication algorithm"
-msgstr "Аўтэнтыфікацыя"
-
-#: standalone/drakvpn:1035
-#, fuzzy, c-format
-msgid "Compression algorithm"
-msgstr "Сэанс"
-
-#: standalone/drakvpn:1036
-#, fuzzy, c-format
-msgid "deflate"
-msgstr "Па дамаўленню"
-
-#: standalone/drakvpn:1043
-#, fuzzy, c-format
-msgid "Remote"
-msgstr "Аддалены прынтэр"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, fuzzy, c-format
-msgid "Exchange mode"
-msgstr "Рэжым злучэння"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, fuzzy, c-format
-msgid "Generate policy"
-msgstr "Асноўныя пашырэнні"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, fuzzy, c-format
-msgid "Passive"
-msgstr "Прыпыніць"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, fuzzy, c-format
-msgid "Certificate type"
-msgstr "Вызначыць тып файлу:"
-
-#: standalone/drakvpn:1083
-#, fuzzy, c-format
-msgid "My certfile"
-msgstr "MM Series"
-
-#: standalone/drakvpn:1084
-#, fuzzy, c-format
-msgid "Name of the certificate"
-msgstr "Імя друкаркі"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr ""
-
-#: standalone/drakvpn:1086
-#, fuzzy, c-format
-msgid "Name of the private key"
-msgstr "Імя друкаркі"
-
-#: standalone/drakvpn:1087
-#, fuzzy, c-format
-msgid "Peers certfile"
-msgstr "Абярыце файл"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr ""
-
-#: standalone/drakvpn:1089
-#, fuzzy, c-format
-msgid "Verify cert"
-msgstr "вельмі добра"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr ""
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, fuzzy, c-format
-msgid "Peers identifier"
-msgstr "Прынтэры"
-
-#: standalone/drakvpn:1115
-#, fuzzy, c-format
-msgid "Proposal"
-msgstr "Пратакол"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1126
-#, fuzzy, c-format
-msgid "DH group"
-msgstr "Выберыце групу"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Каманда"
-
-#: standalone/drakvpn:1134
-#, fuzzy, c-format
-msgid "Source IP range"
-msgstr "Мэнэджэр сэрвісаў"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr ""
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr ""
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "any"
-msgstr "Панэль"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Сьцяг"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Накірунак"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "ipsec"
-msgstr "Шум"
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "discard"
-msgstr "Майстар стварэння"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "tunnel"
-msgstr "няма"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "transport"
-msgstr "gtranslator"
-
-#: standalone/drakvpn:1145
-#, fuzzy, c-format
-msgid "Source/destination"
-msgstr "Інфармацыя аб гуку"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "Па дамаўленню"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "use"
-msgstr "Мыш"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "unique"
-msgstr "Марцінік"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, fuzzy, c-format
-msgid "USA (cable)"
-msgstr "(дазволіць)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Канадскі (Квебэк)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:46
-#, fuzzy, c-format
-msgid "Japan (cable)"
-msgstr "(дазволіць)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr ""
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr ""
-
-#: standalone/drakxtv:47
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Францыя"
-
-#: standalone/drakxtv:48
-#, fuzzy, c-format
-msgid "Newzealand"
-msgstr "Новая Зэляндыя"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr ""
-
-#: standalone/drakxtv:88
-#, fuzzy, c-format
-msgid "Area:"
-msgstr "Карэйская:"
-
-#: standalone/drakxtv:93
-#, fuzzy, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Захаваньне ўжо выконваецца"
-
-#: standalone/drakxtv:103
-#, fuzzy, c-format
-msgid "Scanning for TV channels"
-msgstr "Адзіночны канал"
-
-#: standalone/drakxtv:107
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr ""
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/harddrake2:24
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Альтэрнатыва"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Аўтэнтыфікацыя"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr ""
-
-#: standalone/harddrake2:39
-#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Абярыце файл"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
-
-#: standalone/harddrake2:41
-#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Прылада-шлюз"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, fuzzy, c-format
-msgid "Module"
-msgstr "Мыш"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "Extended partitions"
-msgstr "Стварэнне новага раздзелу"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "the number of extended partitions"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
-
-#: standalone/harddrake2:47
-#, fuzzy, c-format
-msgid "Geometry"
-msgstr "Рэтра"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, fuzzy, c-format
-msgid "Disk controller"
-msgstr "Кіраванне"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr ""
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Мадэль"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr ""
-
-#: standalone/harddrake2:51
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Сеткавы прынтэр (TCP/Socket)"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "Primary partitions"
-msgstr "Фарматаванне раздзелаў"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "the number of the primary partitions"
-msgstr "Першы сектар загрузачнага раздзелу"
-
-#: standalone/harddrake2:53
-#, fuzzy, c-format
-msgid "the vendor name of the device"
-msgstr "Выкарыстаць альтэрнатыўную прыладу"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, fuzzy, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device #"
-msgstr "USB прылады"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device number"
-msgstr "Нумар тэлефону"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, fuzzy, c-format
-msgid "PCI function number"
-msgstr "Імя злучэння"
-
-#: standalone/harddrake2:57
-#, fuzzy, c-format
-msgid "Vendor ID"
-msgstr "Рэдактары"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "Device ID"
-msgstr "Прылада:"
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "Выкарыстаць альтэрнатыўную прыладу"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "Sub device ID"
-msgstr "USB прылады"
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "Выкарыстаць альтэрнатыўную прыладу"
-
-#: standalone/harddrake2:61
-#, fuzzy, c-format
-msgid "Device USB ID"
-msgstr "Прылада:"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-
-#: standalone/harddrake2:66
-#, fuzzy, c-format
-msgid "Cache size"
-msgstr "памер блоку"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr ""
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr ""
-
-#: standalone/harddrake2:71
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "узровень"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Сьцягі"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr ""
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr ""
-
-#: standalone/harddrake2:83
-#, fuzzy, c-format
-msgid "Model name"
-msgstr "Уласнае імя"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr ""
-
-#: standalone/harddrake2:85
-#, fuzzy, c-format
-msgid "Processor ID"
-msgstr "Працэсар"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr ""
-
-#: standalone/harddrake2:86
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Настройкі мышы"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr ""
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr ""
-
-#: standalone/harddrake2:88
-#, fuzzy, c-format
-msgid "Write protection"
-msgstr "Прынтэры"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-
-#: standalone/harddrake2:92
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Фарматаваньне гнуткіх дыскаў"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr ""
-
-#: standalone/harddrake2:96
-#, fuzzy, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Двайны канал"
-
-#: standalone/harddrake2:97
-#, fuzzy, c-format
-msgid "Disk identifier"
-msgstr "Прынтэры"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, fuzzy, c-format
-msgid "Logical unit number"
-msgstr "Гульня ў косьці"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, fuzzy, c-format
-msgid "Installed size"
-msgstr "Усталяванне сістэмы"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, fuzzy, c-format
-msgid "Enabled Size"
-msgstr "Дазволіць пашырэнне"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, fuzzy, c-format
-msgid "type of the memory device"
-msgstr "Выкарыстаць альтэрнатыўную прыладу"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Хуткасьць"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, fuzzy, c-format
-msgid "Bank connections"
-msgstr "Размеркаванне"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, fuzzy, c-format
-msgid "Device file"
-msgstr "Абярыце файл"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr ""
-
-#: standalone/harddrake2:116
-#, fuzzy, c-format
-msgid "the type of the mouse"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
-
-#: standalone/harddrake2:117
-#, fuzzy, c-format
-msgid "the name of the mouse"
-msgstr "Выкарыстаць альтэрнатыўную прыладу"
-
-#: standalone/harddrake2:118
-#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 кнопкі"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr ""
-
-#: standalone/harddrake2:119
-#, fuzzy, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "Калі ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, fuzzy, c-format
-msgid "Identification"
-msgstr "Аўтэнтыфікацыя"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, fuzzy, c-format
-msgid "Connection"
-msgstr "Імя злучэння"
-
-#: standalone/harddrake2:137
-#, fuzzy, c-format
-msgid "Performances"
-msgstr "Усталяваньні"
-
-#: standalone/harddrake2:138
-#, fuzzy, c-format
-msgid "Bugs"
-msgstr "Прац."
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, fuzzy, c-format
-msgid "Partitions"
-msgstr "Раздзел %s"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Магчымасьці"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Налады"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Дапамога"
-
-#: standalone/harddrake2:180
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Аддалены прынтэр"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr ""
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr ""
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Выйсьці"
-
-#: standalone/harddrake2:204
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Апісанне"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr ""
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Паведаміць пра памылку"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Пра..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Пра Harddrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-
-#: standalone/harddrake2:240
-#, fuzzy, c-format
-msgid "Harddrake2"
-msgstr "Пра MenuDrake"
-
-#: standalone/harddrake2:254
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Гл. апісанне абсталявання"
-
-#: standalone/harddrake2:259
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Настройка мышы"
-
-#: standalone/harddrake2:266
-#, fuzzy, c-format
-msgid "Run config tool"
-msgstr "Канфігурацыя сістэмных сэрвісаў"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "невядома"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Невядома"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Рознае"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-
-#: standalone/harddrake2:392
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "секунд"
-
-#: standalone/harddrake2:392
-#, fuzzy, c-format
-msgid "primary"
-msgstr "Пятніца"
-
-#: standalone/harddrake2:396
-#, fuzzy, c-format
-msgid "burner"
-msgstr "Прынтэр"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr ""
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Рахунак:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Пароль:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Імя машыны:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Калі ласка, абярыце тып клавіятуры."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Вы жадаеце каб BackSpace працаваў у кансолі як Delete?"
-
-#: standalone/localedrake:38
-#, fuzzy, c-format
-msgid "LocaleDrake"
-msgstr "Гульня ў косьці"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: standalone/logdrake:50
-#, fuzzy, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Цэнтар кіраваньня"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr ""
-
-#: standalone/logdrake:64
-#, fuzzy, c-format
-msgid "Show only for the selected day"
-msgstr "Ня знойдзена дадзеных для выбранага вузла"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Файл/_Стварыць"
-
-#: standalone/logdrake:71
-#, fuzzy, c-format
-msgid "<control>N"
-msgstr "<control>Q"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Файл/_Адкрыць"
-
-#: standalone/logdrake:72
-#, fuzzy, c-format
-msgid "<control>O"
-msgstr "<control>Q"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Файл/_Захаваць"
-
-#: standalone/logdrake:73
-#, fuzzy, c-format
-msgid "<control>S"
-msgstr "<control>Q"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Файл/Захаваць _як"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Файл/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Налады/Праверыць"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Дапамога/_Пра..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr ""
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr ""
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr ""
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr ""
-
-#: standalone/logdrake:116
-#, fuzzy, c-format
-msgid "search"
-msgstr "Сакавік"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Усталёўкі"
-
-#: standalone/logdrake:134
-#, fuzzy, c-format
-msgid "Matching"
-msgstr "Нічога"
-
-#: standalone/logdrake:135
-#, fuzzy, c-format
-msgid "but not matching"
-msgstr "Мэнэджэр файлаў"
-
-#: standalone/logdrake:139
-#, fuzzy, c-format
-msgid "Choose file"
-msgstr "Выбар памераў"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Каляндар"
-
-#: standalone/logdrake:158
-#, fuzzy, c-format
-msgid "Content of the file"
-msgstr "Далучэнне да Інтэрнэту"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, fuzzy, c-format
-msgid "Mail alert"
-msgstr "Калькулятар"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr ""
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr ""
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
-
-#: standalone/logdrake:378
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Імя дамену"
-
-#: standalone/logdrake:379
-#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "Сервак"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr ""
-
-#: standalone/logdrake:381
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS сэервер:"
-
-#: standalone/logdrake:383
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Прылады"
-
-#: standalone/logdrake:384
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Сервер друку"
-
-#: standalone/logdrake:395
-#, fuzzy, c-format
-msgid "Configure the mail alert system"
-msgstr "Настроіць праверку правапісу"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:403
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Канфігурацыя"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: standalone/logdrake:407
-#, fuzzy, c-format
-msgid "What do you want to do?"
-msgstr "Які пратакол вы жадаеце выкарыстоўваць?"
-
-#: standalone/logdrake:414
-#, fuzzy, c-format
-msgid "Services settings"
-msgstr "Настройка прылады"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-
-#: standalone/logdrake:422
-#, fuzzy, c-format
-msgid "Load setting"
-msgstr "Настройкі клявіятуры"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr ""
-
-#: standalone/logdrake:429
-#, fuzzy, c-format
-msgid "Alert configuration"
-msgstr "Настройка Xorg"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr ""
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr ""
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr ""
-
-#: standalone/logdrake:515
-#, fuzzy, c-format
-msgid "Save as.."
-msgstr "Захаваць спіс"
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "калі ласка, пазначце тып вашай мышы."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Эмуляваць трэцюю кнопку?"
-
-#: standalone/mousedrake:61
-#, fuzzy, c-format
-msgid "Mouse test"
-msgstr "Mouse Systems"
-
-#: standalone/mousedrake:64
-#, fuzzy, c-format
-msgid "Please test your mouse:"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
-
-#: standalone/net_applet:45
-#, fuzzy, c-format
-msgid "Network is up on interface %s"
-msgstr "Сеткавы інтэрфейс"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, fuzzy, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Сеткавы інтэрфейс"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Імя злучэння"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr ""
-
-#: standalone/net_applet:70
-#, fuzzy, c-format
-msgid "Monitor Network"
-msgstr "Сетка"
-
-#: standalone/net_applet:71
-#, fuzzy, c-format
-msgid "Configure Network"
-msgstr "Настройка сеткі"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "Сеткавыя інтэрфэйсы"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Профілі"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr ""
-
-#: standalone/net_applet:223
-#, fuzzy, c-format
-msgid "Interactive intrusion detection"
-msgstr "Функцыі стварэньня інтэрфэйса:"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr ""
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, fuzzy, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "Гэтая падзея была зьменена."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, fuzzy, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"
-
-#: standalone/net_applet:301
-#, fuzzy, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Вы жадаеце скончыць гульню?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, fuzzy, c-format
-msgid "Attack details"
-msgstr "Падрабязнасці"
-
-#: standalone/net_applet:322
-#, fuzzy, c-format
-msgid "Attack time: %s"
-msgstr "Укласьці файл(ы)"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Сеткавы інтэрфейс: %s"
-
-#: standalone/net_applet:324
-#, fuzzy, c-format
-msgid "Attack type: %s"
-msgstr "Тып: "
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Пратакол: %s"
-
-#: standalone/net_applet:326
-#, fuzzy, c-format
-msgid "Attacker IP address: %s"
-msgstr "IP адрас"
-
-#: standalone/net_applet:327
-#, fuzzy, c-format
-msgid "Attacker hostname: %s"
-msgstr "Адбыўся збой пад час атрыманьня назвы вузла: %s\n"
-
-#: standalone/net_applet:328
-#, fuzzy, c-format
-msgid "Service attacked: %s"
-msgstr "Кіраваньне сэрвісамі"
-
-#: standalone/net_applet:329
-#, fuzzy, c-format
-msgid "Port attacked: %s"
-msgstr "Порт:"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Канфігурацыя сеткі"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, fuzzy, c-format
-msgid "Average"
-msgstr "Альтэрнатыўны"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-
-#: standalone/net_monitor:113
-#, fuzzy, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr "Імя злучэння"
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr ""
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, fuzzy, c-format
-msgid "Disconnecting from Internet "
-msgstr "Далучэнне да Інтэрнэту"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, fuzzy, c-format
-msgid "Connecting to Internet "
-msgstr "Далучэнне да Інтэрнэту"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr ""
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr ""
-
-#: standalone/net_monitor:235
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Імя злучэння"
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-
-#: standalone/net_monitor:341
-#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Канфігурацыя"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, fuzzy, c-format
-msgid "sent: "
-msgstr "Эсперанто:"
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr ""
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr ""
-
-#: standalone/net_monitor:406
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Гульня ў косьці"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/net_monitor:478
-#, fuzzy, c-format
-msgid "No internet connection configured"
-msgstr "Сумеснае Інтэрнэт-злучэнне"
-
-#: standalone/printerdrake:68
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Стварэнне дыскеты для ўсталявання"
-
-#: standalone/printerdrake:116
-#, fuzzy, c-format
-msgid "%s Printer Management Tool"
-msgstr "Мэнэджэр тэм"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Дзеяньні"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Дадаць друкарку"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Зрабіць _дапомным"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Рэдагаваць"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Выдаліць"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr ""
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Аднавіць"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Наладзіць CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Шукаць:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Ужыць фільтар"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr ""
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Назва друкаркі"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Тып далучэньня"
-
-#: standalone/printerdrake:218
-#, fuzzy, c-format
-msgid "Server Name"
-msgstr "Сервак"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, fuzzy, c-format
-msgid "Add Printer"
-msgstr "Прынтэр"
-
-#: standalone/printerdrake:226
-#, fuzzy, c-format
-msgid "Add a new printer to the system"
-msgstr "Дадаць карыстальніка ў сыстэму"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Усталяваць як дапомнае"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr ""
-
-#: standalone/printerdrake:232
-#, fuzzy, c-format
-msgid "Edit selected printer"
-msgstr "Рэдагаваць вылучаны радок"
-
-#: standalone/printerdrake:235
-#, fuzzy, c-format
-msgid "Delete selected printer"
-msgstr "Выдаліць вылучаны радок"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Аднавіць сьпіс"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, fuzzy, c-format
-msgid "Configure CUPS"
-msgstr "Настройка IDE"
-
-#: standalone/printerdrake:241
-#, fuzzy, c-format
-msgid "Configure CUPS printing system"
-msgstr "Настройка IDE"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Уключана"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Выключана"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Аўтары: "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, fuzzy, c-format
-msgid "Printer Management %s"
-msgstr "Мэнэджэр файлаў"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr ""
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr ""
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr ""
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr ""
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr ""
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Порт: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr ""
-
-#: standalone/scannerdrake:144
-#, fuzzy, c-format
-msgid "The %s is not supported under Linux."
-msgstr "%s непадтрымліваецца гэтым дыялёгам\n"
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr ""
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr ""
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr ""
-
-#: standalone/scannerdrake:200
-#, fuzzy, c-format
-msgid "Select firmware file"
-msgstr "Абярыце файл"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr ""
-
-#: standalone/scannerdrake:258
-#, fuzzy, c-format
-msgid "Select firmware file for the %s"
-msgstr "Усталяваць шрыфт для стальца"
-
-#: standalone/scannerdrake:276
-#, fuzzy, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Усталяваць шрыфт для стальца"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr ""
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr ""
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr ""
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "Загрузачная прылада"
-
-#: standalone/scannerdrake:347
-#, fuzzy, c-format
-msgid "Searching for scanners..."
-msgstr "Адшукаць файлы на дыску"
-
-#: standalone/scannerdrake:383
-#, fuzzy, c-format
-msgid "Setting up kernel modules..."
-msgstr "Індыкатар гучнасьці"
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, fuzzy, c-format
-msgid "Attention!"
-msgstr "Атракцыён"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:452
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Адшукаць файлы на дыску"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr ""
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr ""
-
-#: standalone/scannerdrake:471
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Сан Марына"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Мэнэджэр файлаў"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr ""
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr ""
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Дадаць карыстальніка"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "Рэдагаваць вылучаны радок"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "/Выдаліць/Выбранае"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr ""
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: standalone/scannerdrake:782
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Выкарыстоўваць незанятую прастору"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr ""
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, fuzzy, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Мыш: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr ""
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, fuzzy, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Ці жадаеце пратэсціраваць настройкі?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Выбар мовы"
-
-#: steps.pm:15
-#, fuzzy, c-format
-msgid "License"
-msgstr "Ліхтэнштайн"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Настройка мышы"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Вызначэнне жорсткага дыску"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Клас усталявання"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Выбар клавіятуры"
-
-#: steps.pm:21
-#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Прынтэр"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Фарматаванне раздзелаў"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Выбар пакетаў"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Усталяванне сістэмы"
-
-#: steps.pm:25
-#, fuzzy, c-format
-msgid "Administrator password"
-msgstr "Пароль для root"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Дадаць карыстальніка"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Настройка сеткі"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Усталяванне загрузчыку"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Настройка X Window"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Настройка службаў"
-
-#: steps.pm:32
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Усталяванне сістэмы"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Заканчэнне ўсталявання"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Гэта дакладна?"
-
-#: ugtk2.pm:968
-#, fuzzy, c-format
-msgid "No file chosen"
-msgstr "абіральнік файла"
-
-#: ugtk2.pm:970
-#, fuzzy, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Няма такога файла ці тэчкі"
-
-#: ugtk2.pm:972
-#, fuzzy, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Назва \"/\" можа быць толькі каталёгам, а ня ключом"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such directory"
-msgstr "Ня тэчка"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such file"
-msgstr "Няма гэткага ключа '%s'\n"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Разгарнуць дрэва"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Згарнуць дрэва"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Пераключэнне паміж упарадкаваннем па групе і асобках"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-
-#: wizards.pm:99 wizards2.pm:99
-#, fuzzy, c-format
-msgid "Installation failed"
-msgstr "Усталяванне SILO"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "У Вашай сістэме маецца недахоп рэсурсаў, таму магчымы праблемы\n"
-#~ "пры ўсталяванні Mandriva Linux. У гэтым выпадку паспрабуйце тэкставую\n"
-#~ "праграму ўсталявання. Для гэтага націсніце ‛F1’ у час загрузкі, а потым\n"
-#~ "набярыце ‛text’ і націсніце <ENTER>."
-
-#, fuzzy
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr "Сувязь з люрам для атрымання спісу даступных пакетаў"
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Усталяванне Mandriva Linux %s"
-
-#, fuzzy
-#~ msgid "hd"
-#~ msgstr "Чад"
-
-#, fuzzy
-#~ msgid "tape"
-#~ msgstr "Іншае"
-
-#, fuzzy
-#~ msgid "choose image file"
-#~ msgstr "Выбар памераў"
-
-#~ msgid "Browse"
-#~ msgstr "Прагляд"
-
-#, fuzzy
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Настрйка драйверу Solaris"
-
-#~ msgid "Preview"
-#~ msgstr "Папярэдні прагляд"
-
-#~ msgid "Choose color"
-#~ msgstr "Выбярыце колер"
-
-#~ msgid "Notice"
-#~ msgstr "Заўвага"
-
-#, fuzzy
-#~ msgid "Generating preview..."
-#~ msgstr "Вызначэнне прыладаў..."
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Дыскавод недаступны"
-
-#, fuzzy
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Устаўце дыскету ў дыскавод %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Азербайджанскі (latin)"
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Устаўце дыскету ў дыскавод\n"
-#~ "Усе дадзеныя на гэтай дыскеце будуць страчаны"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Захаванне на дыскету"
-
-#~ msgid "Installing HPOJ package..."
-#~ msgstr "Усталяванне пакету HPOJ..."
-
-#~ msgid "Installing HPLIP package..."
-#~ msgstr "Усталяванне пакету HPLIP..."
-
-#~ msgid "Root password"
-#~ msgstr "Пароль для root"
-
-#~ msgid "Move"
-#~ msgstr "Перанос"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "На які дыск перанесці?"
-
-#~ msgid "Sector"
-#~ msgstr "Сектар"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "На які сектар перанесці?"
-
-#~ msgid "Moving"
-#~ msgstr "Пераносім"
-
-#~ msgid "Moving partition..."
-#~ msgstr "Пераносіцца раздзел..."
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "Памылка адкрыцця %s для запісу: %s"
-
-#~ msgid "OK"
-#~ msgstr "Так"
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Чешскі (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Нямецкі"
-
-#~ msgid "Dvorak"
-#~ msgstr "Dvorak"
-
-#~ msgid "Spanish"
-#~ msgstr "Іспанскі"
-
-#~ msgid "Finnish"
-#~ msgstr "Фінскі"
-
-#~ msgid "French"
-#~ msgstr "Французскі"
-
-#~ msgid "Norwegian"
-#~ msgstr "Нарвежскі"
-
-#~ msgid "Polish"
-#~ msgstr "Польскі"
-
-#~ msgid "Russian"
-#~ msgstr "Рускі"
-
-#~ msgid "Swedish"
-#~ msgstr "Швецкі"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Армянскі (стары)"
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Армянскі (typewriter)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Армянскі (фанетычны)"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Азербайджанскі (latin)"
-
-#~ msgid "Belgian"
-#~ msgstr "Бельгійскі"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Бразільскі (ABNT-2)"
-
-#~ msgid "Belarusian"
-#~ msgstr "Беларускі"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "Швейцарскі (Нямецкая раскладка)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "Швейцарскі (Французская раскладка)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Чешскі (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Нямецкі (няма заблакіраваных клавіш)"
-
-#~ msgid "Danish"
-#~ msgstr "Дацкі"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Dvorak (US)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Dvorak (Нарвежскі)"
-
-#~ msgid "Estonian"
-#~ msgstr "Эстонскі"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Грузінскі (\"Руская\" раскладка)"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Грузінскі (\"Лацінская\" раскладка)"
-
-#~ msgid "Greek"
-#~ msgstr "Грэчаскі"
-
-#~ msgid "Hungarian"
-#~ msgstr "Мадьярскі"
-
-#~ msgid "Croatian"
-#~ msgstr "Харвацкі"
-
-#~ msgid "Israeli"
-#~ msgstr "Іўрыт"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Іўрыт (фанетычны)"
-
-#~ msgid "Iranian"
-#~ msgstr "Іранскі"
-
-#~ msgid "Icelandic"
-#~ msgstr "Ісландскі"
-
-#~ msgid "Italian"
-#~ msgstr "Італьянскі"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Японскі 106 клавіш"
-
-#~ msgid "Latin American"
-#~ msgstr "Лаціна-Амерыканскі"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Літоўскі AZERTY (стары)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Літоўскі AZERTY (новы)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Літоўскі \"нумар радка\" QWERTY"
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Літоўскі \"фанетычны\" QWERTY"
-
-#~ msgid "Dutch"
-#~ msgstr "Галандскі"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Польскі (стандартная раскладка)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Польскі (qwertz раскладка)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Партугальскі"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Канадскі (Квебэк)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Рускі (фанетычны)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Славенскі"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Славацкі (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Славацкі (QWERTY)"
-
-#~ msgid "Thai keyboard"
-#~ msgstr "Тайская клавіятура"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Турэцкі (традыцыёная \"F\" мадэль)"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Турэцкі (сучасная \"Q\" мадэль)"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Украінскі"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Вьетнамскі \"нумар радка\" QWERTY"
-
-#~ msgid "Enable multiple profiles"
-#~ msgstr "Даступна шмат профіляў"
-
-#~ msgid ""
-#~ "You may now provide options to module %s.\n"
-#~ "Options are in format ``name=value name2=value2...''.\n"
-#~ "For instance, ``io=0x300 irq=7''"
-#~ msgstr ""
-#~ "Вы не можаце задаць опцыі модулю %s.\n"
-#~ "Опцыі - у фармаце ‟імя=значэнне імя2=значэнне2 ...”.\n"
-#~ "Напрыклад, ‟io=0x300 irq=7”"
-
-#~ msgid "Installation of %s failed. The following error occurred:"
-#~ msgstr "Усталяванне %s не атрымалася. Узнікла наступная памылка:"
-
-#~ msgid "/dev/hda"
-#~ msgstr "/dev/hda"
-
-#~ msgid "/dev/hdb"
-#~ msgstr "/dev/hdb"
-
-#~ msgid "/dev/fd0"
-#~ msgstr "/dev/fd0"
-
-#~ msgid ""
-#~ "Please choose which network adapter you want to use to connect to "
-#~ "Internet."
-#~ msgstr ""
-#~ "Калі ласка, пазначце сеткавы адаптар, які плануеце выкарыстоўваць для "
-#~ "далучэння да інтэрнэт"
-
-#~ msgid "chunk size"
-#~ msgstr "памер блоку"
-
-#~ msgid "Chunk size %s\n"
-#~ msgstr "Памер фрагменту %s\n"
-
-#~ msgid "Can not add a partition to _formatted_ RAID md%d"
-#~ msgstr "Не атрымліваецца дадаць раздзел на _адфармаціраваны_ RAID md%d"
-
-#~ msgid "mkraid failed (maybe raidtools are missing?)"
-#~ msgstr "mkraid не працаздольны (можа raid прылады адсутнічаюць?)"
-
-#~ msgid "mkraid failed"
-#~ msgstr "mkraid не працаздольны"
-
-#~ msgid "SILO Installation"
-#~ msgstr "Усталяванне SILO"
-
-#~ msgid "First sector of boot partition"
-#~ msgstr "Першы сектар загрузачнага раздзелу"
-
-#~ msgid "Bootloader installation"
-#~ msgstr "Усталяванне загрузчыку"
-
-#~ msgid "SILO"
-#~ msgstr "SILO"
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Падтрымка 3D-паскарэння ў Вашай відэакарце выканана толькі ў Xorg %s.\n"
-#~ "Xorg %s можа выкарыстоўваць толькі 2D-паскарэнне для гэтай відэакарты."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s,\n"
-#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Ваша відэакарта можа мець 3D-паскарэнне, якое падтрымліваецца толькі Xorg "
-#~ "%s.\n"
-#~ "МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА І МОЖА ПРЫВЕСЦІ ДА\n"
-#~ "ЗАВІСАННЯ ВАШАГА КАМП'ЮТЭРУ. Ваша відэакарта падтрымліваецца Xorg %s, "
-#~ "які\n"
-#~ "лепей падтрымлівае карты з 2D-паскарэннем."
-
-#~ msgid "4 billion colors (32 bits)"
-#~ msgstr "4 міліярда колераў (24 біты)"
-
-#~ msgid "XFree86 server: %s\n"
-#~ msgstr "Сервер XFree86: %s\n"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
deleted file mode 100644
index 81cbf6ac6..000000000
--- a/perl-install/share/po/bg.po
+++ /dev/null
@@ -1,25549 +0,0 @@
-# translation of DrakX-bg.po to Bulgarian
-# Copyright (C) 2000,2003 Free Software Foundation, Inc.
-# Copyright (c) 2000 Mandriva
-# Bozhan Boiadzhiev <bozhan@plov.omega.bg>, 2000.
-# Borislav Aleksandrov <B.Aleksandrov@cnsys.bg>, 2003.
-# Boyan Ivanov <boyan17@bulgaria.com>, 2003.
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX-bg\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2004-09-15 13:27+0200\n"
-"Last-Translator: Boyan Ivanov <boyan17@bulgaria.com>\n"
-"Language-Team: Bulgarian <dict@linux.zonebg.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.0.2\n"
-
-#: ../move/move.pm:292
-#, fuzzy, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Какъв тип информация искате да прибавите"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr ""
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Повторение"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr ""
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Престартира"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr ""
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr ""
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Setting up USB key"
-msgstr "Установявам ISA PNP устройства: "
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "Моля, изберете ниво на сигурност..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-
-#: ../move/move.pm:556
-#, fuzzy, c-format
-msgid "Auto configuration"
-msgstr "Потребителска настройка"
-
-#: ../move/move.pm:556
-#, fuzzy, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Моля, изберете ниво на сигурност..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Грешка"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Появи се грешка, но не знам как да се справя с нея деликатно.\n"
-"Можете да продължите на свой риск."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Появи се грешка"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#: ../move/move.pm:681
-#, fuzzy, c-format
-msgid "Remove system config files"
-msgstr "Да премахна ли loopback файла ?"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr ""
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:71
-#, fuzzy, c-format
-msgid "Kill those programs"
-msgstr "достъп до X програми"
-
-#: ../move/tree/mdk_totem:72
-#, fuzzy, c-format
-msgid "No CDROM support"
-msgstr "Подръжка на радио:"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Прочетете внимателно !"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 КБ"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 КБ"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 МБ"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 МБ"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 МБ"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 МБ"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 МБ"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 МБ"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 МБ или повече"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X сървър"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Изберете X сървър"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr ""
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: Xconfig/card.pm:262
-#, fuzzy, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Инсталиране на пакета %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Изберете капацитет на паметта на графичната си карта"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Настройка на Xorg"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Коя настройка на Xorg искате да имате ?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Настройка на всички глави по отделно"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Използвай разширението Xinerama"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Настройка само на карта \"%s\"(%s)"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s с хардуерно 3D ускорение"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "Картата ви може да има поддръжка на хардуерно 3D ускорение в Xorg %s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s с ЕКСПЕРИМЕНТАЛНО хардуерно 3D ускорение"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Картата ви може да има поддръжка на хардуерно 3D ускорение с Xorg %s.\n"
-"ОТБЕЛЕЖЕТЕ, ЧЕ ТОВА Е ЕКСПЕРИМЕНТАЛНА ПОДДРЪЖКА И КОМПЮТЪРЪТ ВИ МОЖЕ ДА "
-"ЗАБИЕ."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Клиентска"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Изход"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Графична карта"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Монитор"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Разделителна способност"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Тест"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Опции"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Да запазя ли промените ?\n"
-"Текущата настройка е:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, fuzzy, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Изберете монитор"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Изберете монитор"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Plug & Play"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Общ"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Производител"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Проба за Plug & Play е неуспешна. Моля, изберете правилен монитор"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Двата критични параметъра са вертикалната скорост на възстановяване, която "
-"отразява скоростта, \n"
-"с която целият екран се възстановява, и най-важното - хоризонталната\n"
-"синхронизационна скорост, която отразява скоростта, с която се изписват "
-"хоризонталните линии.\n"
-"\n"
-"МНОГО Е ВАЖНО да изберете такава синхронизационната скорост, която да "
-"отговаря на възможностите на Вашия монитор - в противен случай можете да "
-"повредите монитора си.\n"
-" Ако имате някакви съмнения, изберете консервативна настройка."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Хоризонтална скорост на възстановяване"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Вертикална скорост на възстановяване"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 цвята (8 бита)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 хиляди цвята (15 бита)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 хиляди цвята (16 бита)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 милиона цвята (24 бита)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Разделителна способност"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Друга"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Изберете разделителна способност и дълбочина на цветовете"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Графична карта: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "Ok"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Отказ"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Помощ"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Проверка на настройката"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Искате ли да тествате настройките?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Внимание: тестването на тази графична карта може да замрази компютъра ви"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Появи се грешка:\n"
-"%s\n"
-"Опитайте да промените някой параметри"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Позволено в %d секунди"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Всичко правилно ли е ?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Тип клавиатура: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Тип мишка: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Устройство на мишката: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Монитор: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Хоризонтална синхронизация на монитора: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Вертикално опресняване на монитора: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Графична карта: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Графична памет: %s kB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Дълбочина на цвета: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Разделителна способност: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg драйвер: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X при стартиране на системата"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Компютъра ви може автоматично, да влезе в X при стартиране.\n"
-"Искате ли X да се стартира, когато рестартирате системата?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Какъв е типът на използваният TV ?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Моля изчакайте"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Инсталация на Bootloader"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Инсталацията на bootloader провалена. Появи се следната грешка:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Може би се нуждаете да промените Open Firmware стартовото устройство,\n"
-" за да пуснете зареждащата програма. Ако не виждате подсказката и при\n"
-" рестартиране, задръжте Command-Option-O-F при рестартиране и въведете:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" След което напишете: shut-down\n"
-"При следващото рестартиране би трябвало да видете подсказката."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Избахте да инсталирате bootloader на дял\n"
-"Това предполага,че вече имате bootloader на диска(например:  System "
-"Commander).\n"
-"\n"
-"От кой диск зареждате ?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Първият сектор от драйва (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Първи сектор от стартиращия се дял"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Запазва на дискета"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Прескача"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub инсталация"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Къде искате да инсталирате bootloader-а?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Настройка на начина на стартиране"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Опции на зареждащата програма"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Дава размера RAM-памет в Mb"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Опцията ``Ограничи опциите от командния ред'' е безполезна без парола"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Паролите не съвпадат"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Моля, опитайте отново"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Използвана зареждащата програма"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Стартиращо устройство"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Забавяне преди стартирането на подразбиращият образ"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Стартиране от CD "
-
-#: any.pm:289
-#, fuzzy, c-format
-msgid "Force no APIC"
-msgstr "Без APIC"
-
-#: any.pm:291
-#, fuzzy, c-format
-msgid "Force No Local APIC"
-msgstr "Без APIC"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Парола"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Парола (отново)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Ограничи опциите, задавани от командния ред"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "ограничи"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Почистване на /tmp при всяко зареждане"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Точен размер на RAM-паметта, ако е необходимо (намерени %d MB)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Стартово съобщение"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Изчакване на Open Firmware"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Изчакване за стартиране на ядрото"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Стартиране от CD ?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Стартиране от OF ?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "ОС по подразбиране ?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Образ"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Главен"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Допълване"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Видео режим"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, fuzzy, c-format
-msgid "Network profile"
-msgstr "Нов профил..."
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Етикет"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "По подразбиране"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-големина"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "Без графика"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Празен етикет не е разрешен"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Трябва да зададете обаза на ядрото"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Трябва да зададете кореновият дял"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Този етикет вече се използва"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Какъв тип информация искате да прибавите"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Друга ОС (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Друга ОС (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Друга ОС (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Това са различните записи.\n"
-"Можете да добавите още или да промените съществуващите."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "достъп до X програми"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "достъп до rpm инструменти"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "позволява \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "достъп до файлове за администриране"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "достъп до мрежови инструменти"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "достъп до инструменти за компилация"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(вече прибавих %s)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Тази парола е прекалено проста"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Моля, задайте потребителско име"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Потребителското име може да включва само малки букви, номера, `-' и `_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Това име е твърде дълго"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Това потребителско име вече е добавено"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Добави потребител"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Въведете потребител\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Готово"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Приеми потребител"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Истинско име"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Потебителско име"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Шел"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Икона"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Автоматично влиза"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Мога да настроя компютъра ви за влизане в системата автоматично като някой "
-"потребител."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Искате ли да използвате тази особеност?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Да"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Не"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Изберете подразбиращ се потребител :"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Изберете мениджър на прозорци за стартиране:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Моля, изберете език за използване."
-
-#: any.pm:707
-#, fuzzy, c-format
-msgid "Language choice"
-msgstr "ръчно"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Mandriva Linux може да подържа много езици. Изберете\n"
-"езиците които искате ад инсталирате. Те ще бъдат налични след\n"
-"като завърши инсталацията и вие престартирате системата."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Използва уникод по подразбиране"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Избор на език"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Страна / Регион"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Моля, изберете вашата страна."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Ето пълен списък на достръпните страни"
-
-#: any.pm:798
-#, fuzzy, c-format
-msgid "Other Countries"
-msgstr "Други портовете"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Напредничав"
-
-#: any.pm:806
-#, fuzzy, c-format
-msgid "Input method:"
-msgstr "Мрежов метод:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Без"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Не поделя"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Позволява на потребители"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Искате ли да позволите на потребители да поделят техните директории?\n"
-"Разрешаването на това ще позволи на потребителите просто да цъкнат на "
-"\"Поделя\" в konqueror или nautilus.\n"
-"\n"
-"\"Клиентска\" позволява за потребител настройка.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-"Вие може да експортирате като използвате NFS или SMB. Моля, изберете какво "
-"искате да използвате."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Стартира userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Затвори"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Споделянето на потребителски директории използва група \"fileshare\".\n"
-"Може да използвате userdrake,за да добавите потребител към тази група."
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Локален файл"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, fuzzy, c-format
-msgid "Smart Card"
-msgstr "Ethernet карта"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Windows домейн"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr ""
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr ""
-
-#: authentication.pm:56
-#, fuzzy, c-format
-msgid "Local file:"
-msgstr "Локални файлове:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Windows домейн:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr ""
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr ""
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP ауторизация"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Базов dn"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP сървър"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "прост"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, fuzzy, c-format
-msgid "Authentication Active Directory"
-msgstr "идентификация"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Домейн"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Сървър"
-
-#: authentication.pm:115
-#, fuzzy, c-format
-msgid "LDAP users database"
-msgstr "Сървър, Бази-данни"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, fuzzy, c-format
-msgid "Password for user"
-msgstr "Изисква парола"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Криптиране"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "NIS идентификация"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS домейн"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS сървър"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Идентификация на Windows Домейн"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Име на администратор на домейн"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Парола за администратор на домейн"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, fuzzy, c-format
-msgid "Default Idmap "
-msgstr "Подразбиращо се работно място"
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-
-#: authentication.pm:172
-#, fuzzy, c-format
-msgid "Set administrator (root) password"
-msgstr "Въведете парола за root"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, fuzzy, c-format
-msgid "Authentication method"
-msgstr "идентификация"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Без парола"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Паролата е прекалено проста (трябва да бъде дълга поне %d символа)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Идентификация"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "Не можете да използвате broadcast без NIS домейн"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO с графично меню"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO с текстово меню"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "няма достатъчно място за /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Не можете да инсталирате bootloader на дяла %s\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-
-#: bootloader.pm:1437
-#, fuzzy, c-format
-msgid "Re-install Boot Loader"
-msgstr "Инсталиране на bootloader"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "КБ"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "МБ"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "ГБ"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "ТБ"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d минути"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 минута"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d секунди"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "липсва kdesu"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "липсва помощ на конзола"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Австрия"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Австралия"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Белгия"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Бразилия"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Канада"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Швейцария"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Коста Рика"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Чешка Република"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Германия"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Дания"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Естония"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Испания"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Финландия"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Франция"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Гърция"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Унгария"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Ирландия"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Израел"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Италия"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Япония"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Холандия"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Норвегия"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Нова Зеландия"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Полша"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Португалия"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Русия"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Швеция"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Словакия"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Тайланд"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Тайван"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Южна Африка"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "САЩ"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Нов"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Демонтирай"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Монтирай"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Място на монтиране"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Моля въведете WebDAV сървър URL"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL трябва да започва с http:// или https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Сървър: "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Място на монтиране: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Опции: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Първо създайте backup на своите данни"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ако смятате да използвате aboot, оставете свободно пространство (2048 "
-"сектора\n"
-"са достатъчни) в началото на диска"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Магьосник"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Изберете действие"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Имате един голям FAT дял\n"
-"(по принцип се ползват от Microsoft Dos/Windows).\n"
-"Предлагам първо да промените големината на този дял\n"
-"(щракнете върху него, а след това щракнете върху \"Промени големината\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Моля, цъкнете на дяла"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Подробности"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Не е намерен твърд диск"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Журнална FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Празен"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Видове файлова система:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Вместо това използвайте ``%s''"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Създай"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Вид"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Изтрий"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Първо използвайте 'Демонтиране'"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Изберете друг дял"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Изберете дял"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Излез"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Върни"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Премини в Нормален режим"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Премини в Експертен режим"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Продължение въпреки всичко ?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Изход без запис"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Изход, без да запис на таблицата на дяловете ?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Искате ли да запазите промените в /etc/fstab"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Налага се ра рестартирате, преди модификациите да предизвикат ефект"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Изчисти всичко"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Автоматично създаване"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Още"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Информацията за твърдия диск"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Всички първични дялове се използват"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Не мога да добавя повече дялове"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Ако искате още дялове, моля изтрийте един, за да можете да създадете един "
-"разширен дял"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Запази таблицата с дяловете"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Възстанови таблицата с дяловете"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Спасяване таблицата с дяловете"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Презареди таблицата с дяловете"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Автоматично монтиране на сменяем носител"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Изберете файл"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Резервната таблица на дяловете не е със същата големина\n"
-"Да продължа ли все пак ?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Опитвам се да спася таблицата на дяловете"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Подробна информация"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Промени големината"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Форматирай"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Прибави към RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Прибави към LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Премахни от RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Премахни от LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Модифицирай RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Използвай за loopback"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Създай нов дял"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Начален сектор: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Големина в MB: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Вид файлова система: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Предпочитание: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Име на logical volume"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Да премахна ли loopback файла ?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"След промяна на типа на дяла %s, всички данни върху него ще бъдат загубени"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Промяна типа на дяла"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Коя файлова система искате ?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Преход от ext2 към ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Къде искате да монтирате loopback-файла %s ?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Къде искате да монтирате устройство %s ?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Не мога да махна точката на монтиране, тъй като дялът се използва за "
-"loopback.\n"
-"Първо махнете loopback"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Къде искате да монтирате устройство %s ?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Промяна на големината"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Изчислявам границите на fat файловата система"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Големината на дяла не може да бъде променена"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Всички данни на този дял трябва да бъдат архивирани"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"След промяна големината на дяла %s, данните върху него ще бъдат загубени"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Изберете нова големина"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Нова големина в MB: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Изберете съществуващ RAID за прибавяне"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "нов"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Изберете съществуващ LVM за прибавяне"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "LVM име ?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Този дял не може да бъде използван за loopback"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Име на loopback файла: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Дайте име на файл"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Файлът вече се използва то друг loopback, изберете друг файл."
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Файлът вече съшествува. Да го използвам ли ?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Опции за mount:"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Различни"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "устройство"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "ниво"
-
-#: diskdrake/interactive.pm:1023
-#, fuzzy, c-format
-msgid "chunk size in KiB"
-msgstr "големина на парчето"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Внимание: тази операция е опасна"
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Какъв тип разделяне на дялове ?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Трябва да рестартирате, преди промените да влязат в сила"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Таблицата на дяловете на устройство %s ще бъде записана върху диска !"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "След форматиране на дяла %s, всички данни върху него ще бъдат загубени"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Премести файловете на нов дял"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Скрий файловете"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Директорията %s вече съдържа някакви данни\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Премести файловете на нов дял"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Копиране на %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Изтриване на %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "дял %s сега е известен като %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Устройство: "
-
-#: diskdrake/interactive.pm:1187
-#, fuzzy, c-format
-msgid "Devfs name: "
-msgstr "Име на хост:"
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Буква на устройството под DOS: %s (просто предположение)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Вид: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Име: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Начало: сектор %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Размер: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s сектора"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "От цилиндър %d до цилиндър %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Форматиран\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Неформатиран\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Монтиран\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback файл(ове):\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Дял, който се стартира по подразбиране\n"
-"    (за MS-DOS boot, не за lilo)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Ниво %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, fuzzy, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Размер на парчето %s\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-дискове %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Име на loopback файла: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Вероятно е този дял да е\n"
-"Драйвер-дял, може би трябва\n"
-"трябва да го оставите.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Тази специална стартираща\n"
-"ивица на дяла е за двойно\n"
-"стартиране на системата ви.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Само за четене"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Размер: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Геометрия: %s цилиндри, %s глави, %s сектори\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Информация: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-дискове %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Тип на таблицата с дялове: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "на канал %d id %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Криптиращ ключ за файлова система"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Избор на криптиращ ключ за еашата файлова система"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Криптиращ ключ е прекалено прост (трябва да бъде дълга поне %d символа)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Ключовете за криптиране не съвпадат"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Ключ за криптиране"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Ключ за криптиране (отново)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, fuzzy, c-format
-msgid "Encryption algorithm"
-msgstr "идентификация"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Промяни типа"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "Не мога да вляза като използвам име %s (грешна парола?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Изисква Идентификация за Домейн"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Кое потребителско име"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Друго"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Моля, въведете вашето име, парола и име на домейн за достъп до този хост."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Потребителско име"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Търси сървъри"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Търси нови сървъри"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"Пакет %s трябва да бъде инсталиран\n"
-"Искате да го инсталирате?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Задължителният пакет %s липсва"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Инсталиране на пакети ..."
-
-#: do_pkgs.pm:227
-#, fuzzy, c-format
-msgid "Removing packages..."
-msgstr "Изтриване на %s ..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Форматира дял %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "монтирането на дял %s в директория %s пропадна"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Проверка на %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "грешка при демонтиране на %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Разрешава swap дял %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Форматиране на дял %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Създаване и форматиране на файл %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "не знам как да форматирам %s в тип %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s форматиране от %s провалено"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr ""
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr ""
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr ""
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr ""
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "Не можете да използвате JFS за дял по-малък от 16 МБ"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "Не можете да инсталиране ReiserFS на дял по-малък от 32 МБ"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "с /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "сървър"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Не мога да разчета таблицата на дяловете на устройство %s, прекалено е "
-"повредена за мен :(\n"
-"Мога да се опитам да изчистя лошите дялове (ВСИЧКИ ДАННИ ще бъдат "
-"загубени!).\n"
-"Друго решение е да забраните на DrakX поправя таблицата с дялове.\n"
-"(грешката е %s)\n"
-"\n"
-"Съгласни ли сте да загубите всички дялове?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Точките на монтиране трябва да започват с /"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Точките за монтиране трябва да съдържат само букви и цифри"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Вече има дял монтиран на това място %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Маркирали сте софтуерен RAID дял като root (/).\n"
-"Няма зареждаща програма, която да може да се справи с него без /boot дял.\n"
-"Така че добавете /boot дял"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "Не можете да използвате LVM тип за място на монтиране %s"
-
-#: fsedit.pm:409
-#, fuzzy, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Маркирали сте софтуерен RAID дял като root (/).\n"
-"Няма зареждаща програма, която да може да се справи с него без /boot дял.\n"
-"Така че добавете /boot дял"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Тази директория трябва да остане в рамките на root файловата система."
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Нуждаете се от истинска файлова система (ext2, reiserfs,xfs, или jfs) за "
-"тази точка на монтиране\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-"Вие не може да използвате криптирана файлова система за точка на монтиране %s"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Няма достатъчно място за автоматично разпределяне"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Няма нищо за правене"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Флопи"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip устройство"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Диск"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CDROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD записващо"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Лента"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Видео карта"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "TV карта"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Друга мултимедийни устройства"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Звукова карта"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr ""
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Процесори"
-
-#: harddrake/data.pm:209
-#, fuzzy, c-format
-msgid "ISDN adapters"
-msgstr "ISDN карта"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet карта"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Модем"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr ""
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Памет"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "AGP контролери"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Принтер"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Джойстик"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA контролери"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAID контролери"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA контролери"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire контролери"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCIA контролери"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI контролери"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "USB контролери"
-
-#: harddrake/data.pm:421
-#, fuzzy, c-format
-msgid "USB ports"
-msgstr ", USB принтер"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus контролери"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Бриджове и системни контролери"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Клавиатура"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Мишка"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Скенер"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Неизвестни/Други"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Моля, почакайте ... Прилагане на настройките"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Няма алтернативен драйвер"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Няма известнен  OSS/ALSA алтернативен драйвер за вашата звукова карта (%s) "
-"която в момента използва \"%s\""
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Настройка за звук"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Тук може да изберете алтернативен драйвер (OSS или ALSA) за вашата звукова "
-"карта (%s)."
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Вашата карта в момента използва %s\"%s\" драйвер (подразбиращ драйвер за "
-"картата ви е \"%s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Драйвер: "
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr ""
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Предупреждение"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr ""
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Няма свободен драйвер за вашата звукова карта (%s), но има собствени драйвер "
-"на \"%s\"."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Няма известен драйвер"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Няма драйвер за вашата звукова карта (%s)"
-
-#: harddrake/sound.pm:287
-#, fuzzy, c-format
-msgid "Unknown driver"
-msgstr "Неизвестен драйвер"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Грешка: \"%s\" драйвер за вашата карта е инсталиран"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Затруднения при звук"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Нека избера драйвер"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Избор на случаен драйвер"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Ако мислите , че знаете кой точно драйвер е за вашата карта\n"
-"вие може да го изберете от горният списък.\n"
-"\n"
-"Текущо използваният драйвер за вашата \"%s\" звукова карта е \"%s\" "
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Автоматично засичане"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Неизвестен|Общ"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Неизвестен|CPH05X (bt878) [много производители]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Неизвестен|CPH06X (bt878) [много производители]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Модел на карта:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Тип на тунер:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL настройки:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Подръжка на радио:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "разрешава подръжка на радио"
-
-#: help.pm:11
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Преди да продължите, трябва внимателно да прочетете условията на лиценза. "
-"Той\n"
-"покрива цялата Mandriva Linux дистрибуция, и, ако сте съгласни с всички "
-"условия\n"
-"в него, сложете отметка на \"%s\".Ако не сте съгласни,просто спрете "
-"компютъра си."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Приеми"
-
-#: help.pm:17
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"GNU/Linux е многопотребителска система, която означава, че всеки потребител "
-"може\n"
-"да има свои предпочитания, файлове и т.н.. можете да прочетете Ръководството "
-"на\n"
-"Потребителя, за да научите повече.\n"
-"За разлика от Root, който е администраторът, потребителите, които ще "
-"добавите тук\n"
-"няма да могат да променят нищо освен собствените си файлове и техните "
-"настройки.\n"
-"Ще трябва да създадете поне един обикновен потребител за себе си.\n"
-"С този акаунт ще трябва да влизате за рутинна дейност. Въпреки това "
-"практиката\n"
-"да влизате като root ежедневно, може да бъде много опасна ! И най-малката "
-"грешка\n"
-"може да означава, че системата ви няма да работи повече. Ако направите някоя "
-"сериозна\n"
-"грешка като потребител, това може са да доведе до загуба на част от "
-"информацията,\n"
-"но не и на цялата система.\n"
-"\n"
-"Първо, трябва да си въведете името. Това не е задължително, разбира се, "
-"всъщност\n"
-"можете да въведете каквото и да е. DrakX след това ще избере първата "
-"въведена\n"
-"в кутийката дума и ще го изкара като потребителско име. Това е името, с "
-"което\n"
-"всъщност определеният потребител ще влиза в системата. Можете да го "
-"промените.\n"
-"Трябва да въведете и парола тук. Паролата на непревилегирован (обикновен) "
-"потребител\n"
-"не е толкова фатална като тази на Root от гледна точка на сигурността, но "
-"все\n"
-"пак няма причина да я подценявате, тъй като рискувате файловете си.\n"
-"\n"
-"След като цъкнете на \"Приеми потребител\", можете да добавите колкото си "
-"искате.\n"
-"Добавете по един потребител за всеки от приятелите си: баща си, сестра си, "
-"например.\n"
-"Когато сте добавили всички потребители, които искате, цъкнете Готово.\n"
-"\n"
-"Цъкнете на бутона \"Напредничав\", за да промените обвивката по подразбиране "
-"на\n"
-"потребителя (bash по подразбиране)."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Потребителско име"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Следващ"
-
-#: help.pm:54
-#, fuzzy, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"По-горе са изброени засечените Linux дялове съществуващи\n"
-"на твърдия ви диск. Можете да запазите избора направен от магьосника, те са\n"
-"добри за обща употреба. Ако ги промените, трябва да поне да определите\n"
-"root дял (\"/\"). Не избирайте прекалено малки дялове, защото няма да "
-"можете\n"
-"да инсталирате достатъчно софтуер. Ако искате да съхранявате данните си на\n"
-"отделен дял, трябва да изберете \"/home\" (възможно е само, ако имате "
-"повече\n"
-"от един Linux дял).\n"
-"\n"
-"\n"
-"За информация, всеки дял е показан, както следва: \"Име\", \"Капацитет\".\n"
-"\n"
-"\n"
-"\"Името\" се кодира както следва: \"тип на диска\", \"номер на диска\",\n"
-"\"номер на дял\" (например, \"hda1\").\n"
-"\n"
-"\n"
-"\"Типът на диска\" може да е \"hd\", ако е IDE твърд диск, или \"sd\", ако "
-"е\n"
-"SCSI твърд диск.\n"
-"\n"
-"\n"
-"\"Номерът на диска\" винаги е буквата след \"hd\" или \"sd\". При IDE "
-"дискове:\n"
-"\n"
-"   * \"a\" означава \"master диск на първия IDE контролер\",\n"
-"   * \"b\" означава \"slave диск на първия IDE контролер\",\n"
-"   * \"c\" означава \"master диск на втория IDE контролер\",\n"
-"   * \"d\" означава \"slave диск на втория IDE контролер\".\n"
-"\n"
-"\n"
-"При SCSI устройства, \"a\" означава \"първи твърд диск\", \"b\" означава "
-"\"втори твърд диск\" и т.н.."
-
-#: help.pm:85
-#, fuzzy, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Инсталацията на Mandriva Linux е разположена на няколко CDROM-а. DrakX\n"
-"знае дали избран пакет не се намира на друг CDROM,така че ще извади "
-"текущото\n"
-"CD и ще ви остави да вкарате това, от което има нужда."
-
-#: help.pm:92
-#, fuzzy, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"Сега е моментът да определите кои програми искате да бъдат инсталирани на\n"
-"системата ви. В Mandriva Linux дистрибуцията има хиляди пакети, но не е\n"
-"задължително да ги знаете наизуст.\n"
-"\n"
-"Ако извършвате стандартна инстлация от CDROM, първо ще бъдете попитани кои\n"
-"CD-та имате (в Експертен режим). Проверете заглавията на CD-тата и посочете\n"
-"кутийките съответстващи на CD-тата, с които разполагате. Цъкнете \"OK\",\n"
-"когато сте готови да продължите.\n"
-"\n"
-"Пакетите са подредени в групи съответстващи на практическата употреба на\n"
-"машината ви. Групите, сами по себе си, са подредени в четири секции:\n"
-"\n"
-" * \"Работна станция\": ако смятате да използвате машината си като работна "
-"станция,\n"
-"изберете една или повече съответните групи.\n"
-"\n"
-" * \"Разработка\": ако машината ви ще бъде използване за програмиране, "
-"изберете\n"
-"желаната(ите) група(и).\n"
-"\n"
-" * \"Сървър\": накрая, ако машината ви ще бъде използвана за сървър, ще\n"
-"можете да изберете кои от най-често използваните услуги искате да имате\n"
-"инсталирани на машината.\n"
-"\n"
-" * \"Графична среда\": тук можете да изберете предпочитаната графична "
-"среда.\n"
-"Поне една трябва да бъде избрана, ако искате да имате графична среда !\n"
-"\n"
-"Премествайки курсора на мишната над името на групата, ще видите кратък\n"
-"обясненителен текст за нея.\n"
-"\n"
-"Можете да цъкнете кутийката \"Индивидуален избор на пакети\", която е "
-"полезна,\n"
-"ако сте запознати с пакетите, които ще ви бъдат предложени или ако искате "
-"да\n"
-"имате пълен контрол над това, което да бъде инсталирано.\n"
-"\n"
-"Ако сте започнали инсталацията в режим на \"Обновяване\", можете да "
-"изключите\n"
-"всички групи, за да избегнете инсталирането на нови пакети. Това е полезно\n"
-"при поправка или обновяване на съществуващата система."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Работна станция"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Разработка"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Графична среда"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Избиране на пакети един по един"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Обновяване"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "С X"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "С базова документация"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Наистина минимална инсталация"
-
-#: help.pm:149
-#, fuzzy, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"Накрая, в зависимост от избора ви дали да избирате пакети един по един, ще\n"
-"ви бъде представено дърво съдържащо всички пакети подредени по групи и\n"
-"подргрупи. Докато обхождате дървото, можете да изберете цели групи, "
-"подгрупи\n"
-"или отделни пакети.\n"
-"\n"
-"Когато посочите пакет от дървото, ще се появи описание вдясно. Когато\n"
-"изборът е приключен, цъкнете бутона \"Инсталирай\", който ще пусне процеса\n"
-"на инсталация. В зависимост от скоростта на хардуера ви и броя на пакетите,\n"
-"които искате да бъдат инсталирани, процесът може да отнеме известно време.\n"
-"Очакваното време за приключване на процеса, че бъде показано на екрата, за\n"
-"да ви помогне да прецените дали имате достатъчно време да се насладите на\n"
-"чаша кафе.\n"
-"\n"
-"!! Ако е избран сървърен пакет, било то умишлено или защото е част от цяла\n"
-"група, ще бъдете помолени за потвърждение, че наистина искате този сървър\n"
-"да бъде инсталиран. В Mandriva Linux, всички сървъри тръгват по "
-"подразбиране\n"
-"при зареждане.Даже ако са сигурни и нямат известни проблеми, когато\n"
-"дистрибуцията се разпространява, може да се случи така, че да се появят\n"
-"дупки в сигурността, след като версията на Mandriva Linux е завършена. Ако\n"
-"не знаете за какво служи определена услуга или защо е инсталирана, цъкнете\n"
-"\"Не\". С цъкане на \"Да\"  ще инсталирате изброени услуги и те ще бъдат\n"
-"стартирани автоматично по подразбиране. !!\n"
-"\n"
-"Опцията \"Автоматични зависимости\" изключва предупредителните диалози,\n"
-"когато инсталаторът авоматично реши избере пакет. Това се случва, защото\n"
-"е решил, че се нуждае да задоволи зависимост с друг пакет, за да приключи\n"
-"успешно инсталацията.\n"
-"\n"
-"Малката иконка на дискетка в дъното на списъка позволява да заредите списък\n"
-"с пакети от предишна инсталация. Ако цъкнете на тази иконка, ще бъдете\n"
-"помолени да вкарате дискета създадена преди това в края на друга "
-"инсталация.\n"
-"Вижте втората подсказка по време на последната стъпка, за това как да\n"
-"създадете такава дискета."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr ""
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Настрока"
-
-#: help.pm:189
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Сега можете да изберете кои услуги да се пускат при стартиране.\n"
-"\n"
-"Тук са представени всички услуги, достъпни с настоящата инсталация.\n"
-"Прегледайте ги внимателно и изключете тези, които не ви трябват винаги при "
-"стартиране.\n"
-"\n"
-"Можете да видите кратък обяснителен текст за услугата, като поставите курора "
-"на мишката си\n"
-"над името на услугата. Ако не сте сигурни, дали услугата е полезна или не, "
-"по-добре\n"
-"е да оставите избора по подразбиране.\n"
-"\n"
-"Внимавайте с тази стъпка, ако смятате да използвате машината си като "
-"сървър:\n"
-"сигурно не бихте искали да пускате услуги, от които не се нуждаете. Моля,\n"
-"запомнете, че някои услуги могат да бъдат опасни, ако са включени на "
-"сървъра.\n"
-"По принцип, избирайте само услугите, от които наистина се нуждаете.\n"
-"!!"
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Хадруерният ви часовник е настроен по GMT"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Автоматична синхронизация на времето"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-
-#: help.pm:308
-#, fuzzy, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Накрая, ще бъдете попитани дали искате да виждате графичния интерфейс при\n"
-"зареждане. Отбележете, че този въпрос ще ви бъде зададен даже ако изберете,\n"
-"да не тествате настройката. Очевидно, бихте отговорили с \"Не\", ако "
-"машината\n"
-"ще работи като сървър или ако няма успешно настроен дисплей."
-
-#: help.pm:316
-#, fuzzy, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"В този момент трябва изберете къде на твърдия си диска да инсталирате "
-"вашата\n"
-"Mandriva Linux операционна система. Ако твърдият ви диск е празен или друга\n"
-"операционна система използва цялото пространство, ще трябва да го "
-"разделите.\n"
-"Казано простичко, разделянето на твърдия диск се състои в логическо "
-"разделяне\n"
-"цел да се създаде място за инсталация на новата Mandriva Linux система.\n"
-"\n"
-"Тъй като процесът на разделяне обикновено е необратим, разделянето може да\n"
-"изглежда плашещ и стряскащ, ако сте неопитен потребител. Слава Богу, има\n"
-"магьосник, който опростява този процес. Преди да започнете, консултирайте "
-"се\n"
-"с ръководството и не бързайте.\n"
-"\n"
-"Ако пускате инсталацията в Експертен режим, ще бъдете въведени в DiskDrake,\n"
-"разделящия инструмент на Mandriva Linux, който ви позволява да донастроите\n"
-"дяловете си. Вижте главата DiskDrake от ръководството. От инсталационния\n"
-"интерфейс можете да използвате магьосниците, като натиснете бутона\n"
-"\"Магьосник\" на диалога.\n"
-"\n"
-"Ако дяловете са вече определени, дали от предишна инсталация или от друг\n"
-"иструмент за разделяне, просто изберете на кой да инсталирате Linux\n"
-"системата.\n"
-"\n"
-"Ако дяловете не са определени, ще трябва да създадете такива използвайки\n"
-"магьосника. В зависимост от настройката на твърдия диск, са възможни "
-"няколко\n"
-"опции:\n"
-"\n"
-" * \"%s\" тази опция просто ще доведе до автоматично поделяне на празното "
-"пространство на твърдия ви диск. Няма да бъдете питани за това.\n"
-"\n"
-" * \"%s\": магьосникът е засякъл един или повече\n"
-"съществуващи Linux дялове на твърдия ви диск. Ако искате да ги използвате,\n"
-"изберете тази опция.\n"
-"\n"
-" * \"%s\": ако имате инсталиран\n"
-"Microsoft Windows на твърдия си диск и той заема цялото достъпно\n"
-"пространство на него, трябва да освободите място за Linux данни. За да\n"
-"направитетова, можете да изтриете Microsoft Windows дяла и данните (вижте\n"
-"решенията \"Изтрий целия диск\" или \"Екпертен режим\") или да промените\n"
-"големината на Microsoft Windows дяла. Промяната на големината може да бъде\n"
-"извършена без загуба на данни. Това решение се препоръчва, ако искате\n"
-"едновременно Mandriva Linux и Microsoft Windows на един и същи компютър.\n"
-"\n"
-"   Преди да изберете тази опция, моля, разберете, че след тази процедура,\n"
-"големината на Microsoft Windows дяла ще бъде по-малка, отколкото преди "
-"това.\n"
-"Ще имате по-малко място под Microsoft Windows за съхраняване на данни или "
-"за\n"
-"инсталира на нов софтуер.\n"
-"\n"
-" * \"%s\": ако искате да изтриете всички данни и дялове, които\n"
-"съществуват на вашия твърд диск и да ги замените с новата Mandriva Linux\n"
-"система, изберете тази опция. Бъдете внимателни с това решения, защото няма\n"
-"да можете да върнете обратно избора си, след като потвърдите.\n"
-"\n"
-"   !! Ако изберете тази опция, всички данни на диска ви ще бъдат "
-"загубени !!\n"
-"\n"
-" * \"%s\": Това просто ще изтрие всичко на диска и ще започне на\n"
-"чисто, разделяне от раз. Всякакви данни на диска ви ще бъдат загубени.\n"
-"\n"
-"   !! Ако изберете тази опция, всички данни на диска ви ще бъдат "
-"загубени !!\n"
-"\n"
-" * \"%s\": изберете тази опция, ако искате ръчно да разделите\n"
-"твърдия си диск. Бъдете внимателни - това е мощен, но опасен избор. Можете\n"
-"много лесно да загубите всички данни. Така че не избирайте това, ако не\n"
-"знаете какво правите."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Използвай свободното място"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Изпозване на съществуващ дял"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Използвай свободното място на Windows дяла"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Изтрий целия диск"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Премахни Windows(TM)"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Клиентско разделяне на диска"
-
-#: help.pm:377
-#, fuzzy, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"А така ! Инсталацията е завършена и GNU/Linux системата ви е готова за\n"
-"употреба. Просто цъкнете \"OK\", за да рестартирате системата. Можете да\n"
-"стартирате GNU/Linux или Windows, което предпочитате (ако имате две "
-"системи),\n"
-"веднага след като компютърът стартира отново.\n"
-"\n"
-"Бутона \"Напредничав\" (само в \"Експертен\") показва още два бутона за:\n"
-"\n"
-" * \"генериране на дискета за автоматична инсталация\": за да създадете\n"
-"инсталационна дискета, която след това автоматично да изчършва цялата\n"
-"инсталация без помощта на оператор, приличаща на инсталацията, която току-"
-"що\n"
-"сте извършили.\n"
-"\n"
-"   Отбележете, че две различни опции са достъни, чрез цъкане на бутона:\n"
-"\n"
-"    * \"Преиграй\". Това е частично автоматизирана инсталация като стъпките\n"
-"по разделяне на дялове остават интерактивни.\n"
-"\n"
-"    * \"Автоматична\". Напълно автоматична инсталация: твърдият диск се\n"
-"презаписва напълно, всякакви данни се загубват.\n"
-"\n"
-"   Тази особеност е много удобна, когато инсталирате голям брой подобно\n"
-"машини. Вижте секцията за автоматична инсталация на нашия web-сайт.\n"
-"\n"
-"    * \"Запази избора на пакети\"(*): запазва избора на пакети, така както "
-"е\n"
-"направен преди. Когато правите друга инсталация, вкарайте дискетата в\n"
-"устройството и пуснете инсталацията да върви чрез помощния екран, като\n"
-"натиснете клавиша [F1] и като напишете >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Трябва ви FAT-форматирана дискета (за да създадете таква под GNU/Linux,\n"
-"напишете \"mformat a:\")"
-
-#: help.pm:409
-#, fuzzy, c-format
-msgid "Generate auto-install floppy"
-msgstr "Подготвя дискета за автоматична инсталация"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Повтори"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Автоматизиран"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Запази избор на пакети"
-
-#: help.pm:412
-#, fuzzy, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Всички новодефинирани дялове трябва да бъдат форматирани, за да се "
-"използват\n"
-"(форматиране означава създаване на файлова система).\n"
-"\n"
-"В този момента може би искате да преформатирате някои съществуващи дялове, "
-"за\n"
-"да изтриете всякакви данни, които съдържат. Ако искате да го направите, "
-"моля\n"
-"изберете тях.\n"
-"\n"
-"Моля, отбележете, че не е необходимо да преформатирате всички дялове\n"
-"съществуващи отпреди. Трябва да преформатирате дяловете съдържащи\n"
-"операционната система (като \"/\", \"/usr\" или \"/var\"), но това не е\n"
-"задължително за дялове съдържащи данни, които искате да запазите "
-"(обикновено\n"
-"\"/home\").\n"
-"\n"
-"Моля, бъдете внимателни, когато избирате дяловете. След форматиране всички\n"
-"данни на посочените дялове ще бъдат изтрити и няма да можете да ги\n"
-"възстановите.\n"
-"\n"
-"Цъкнете \"OK\", когато сте готови да форматирате далове.\n"
-"\n"
-"Цъкнете \"Отказ\", ако искате да изберете други дялове за инсталация на "
-"новата\n"
-"си Mandriva Linux операционна система.\n"
-"\n"
-"Цъкнете \"Напредничав\", ако искате да изберете дялове, които да бъдат\n"
-"проверени за лоши блокове от диска."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Предишен"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Инсталирай"
-
-#: help.pm:447
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"В този момент, трябва да изберете нивото на сигурност, което искате за\n"
-"машината. По правило, колкото повече машината ви е достъпна и колкото "
-"повече\n"
-"данни се съхраняват на нея, толкова по-високо трябва да е нивото на "
-"сигурност.\n"
-"Въпреки това, високата сигурност е за сметка на лекотата на работа.\n"
-"Обърнете се към главата MSEC на Reference Manual, за да получите повече "
-"информация\n"
-"за значението на тези нива.\n"
-"\n"
-"Ако не знаете както да изберете, изберете опцията по подразбиране."
-
-#: help.pm:458
-#, fuzzy, c-format
-msgid "Security Administrator"
-msgstr "Администратор по защита:"
-
-#: help.pm:461
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"В този момент трябва да изберете кой дялове да бъдат използвани за "
-"инсталация\n"
-"на вашата Mandriva Linux система. Ако дяловете вече са определени, дали от\n"
-"предишна инсталация на GNU/Linux или от друг инструмент за разделяне, "
-"можете\n"
-"да използвате съществуващите далове. В противен случай трябва да определите\n"
-"дялове от твърдия диск.\n"
-"\n"
-"За да създадете дялове, трябва първо да изберете твърд диск. Можете да\n"
-"изберете диск за разделяне, като цъкнете на \"hda\" за първо IDE "
-"устройство,\n"
-"\"hdb\" за второто, \"sda\" за първо SCSI устройство и т.н..\n"
-"\n"
-"За да разделите избрания твър диск, можете да използвате следния опции:\n"
-"\n"
-" * \"Изчисти всичко\": тази опция изтрива всички дялове на избрания диск.\n"
-"\n"
-" * \"Автоматично създаване\": тази опция позволява автоматично да съзадете\n"
-"Ext2 и swap дялове в свободното пространство на твърдия ви диск.\n"
-"\n"
-" * \"Спаси таблицата с дялове\": ако таблицата с дялове е повредена, можете\n"
-"да се опитате да я възстановите с тази опция. Моля, бъдете внимателни и\n"
-"помнете, че може да не стане.\n"
-"\n"
-" * \"Върни\": използвайте тази опция, за да отмените промените.\n"
-"\n"
-" * \"Презареди\": можете да използвате тази опция, ако искате да върнете\n"
-"всички промени и да заредите първоначалната таблица с дялове.\n"
-"\n"
-" * \"Магьосник\": използвайте тази опция, ако искате да използвате "
-"магьосник,\n"
-"да раздели твърдия ви диск. Това се препоръчва, ако нямате достатъчно "
-"познания\n"
-"за разделянето.\n"
-"\n"
-" * \"Възстанови от дискета\": тази опция ще ви позволи да възстановите "
-"запазена\n"
-"преди това на дискета таблица с дялове.\n"
-"\n"
-" * \"Запази на дискета\": запазва таблицата с дялове на дискета. Полезно е "
-"при\n"
-"евентуално възстановяване на таблицата при необходимост. Силно се "
-"препоръчва\n"
-"да направите това.\n"
-"\n"
-" * \"Готово\": когато сте свършили с разделянето на твърдия си диск, това "
-"ще\n"
-"запише промените върху диска.\n"
-"\n"
-"Забележета: можете да достигнете всяка опция използвайки клавиатурата.\n"
-"Минавайте през дяловете използвайки [Tab} и стрелките нагоре/надолу.\n"
-"\n"
-"Когато е избран дял, можете да използвате:\n"
-"\n"
-" * Ctrl-c, за да създадете нов дял (ако е избран празен дял);\n"
-"\n"
-" * Ctrl-d, за да изтриете дял;\n"
-"\n"
-" * Ctrl-m, за да установите точка на монтиране.\n"
-"\n"
-"Ако инсталите на PPC машина, сигурно ще искате да създадете малък HFS\n"
-"\"bootstrap\" дял от поне 1 МБ, който ще бъде използват от boot loader-ът\n"
-"yaboot. Ако смятате да направите дяла по-голям, например 50 МБ, можете да "
-"го\n"
-"намерите за полезно място, където да съхранявате някое ядро или image на\n"
-"ramdisk в случай на извънредни ситуации."
-
-#: help.pm:530
-#, fuzzy, c-format
-msgid "Removable media auto-mounting"
-msgstr "Автоматично монтиране на сменяем носител"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Премини в нормален/експертен режим"
-
-#: help.pm:533
-#, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Беше засечен повече от един Microsoft Windows дял\n"
-"на твърдия ви диска. Изберете този, чиято дължина искате да промените, за "
-"да\n"
-"инсталирате Mandriva Linux операционна система.\n"
-"\n"
-"\n"
-"За информация, всеки дял е изброен както следва: \"Linux име\", \"Windows име"
-"\", \"Капацитет\".\n"
-"\n"
-"\"Linux името\" се кодира както следва: \"тип на диска\", \"номер на диска"
-"\",\n"
-"\"номер на дял\" (например, \"hda1\").\n"
-"\n"
-"\n"
-"\"Типът на диска\" може да е \"hd\", ако е IDE твърд диск, или \"sd\", ако "
-"е\n"
-"SCSI твърд диск.\n"
-"\n"
-"\n"
-"\"Номерът на диска\" винаги е буквата след \"hd\" или \"sd\". При IDE "
-"дискове:\n"
-"\n"
-"   * \"a\" означава \"master диск на първия IDE контролер\",\n"
-"   * \"b\" означава \"slave диск на първия IDE контролер\",\n"
-"   * \"c\" означава \"master диск на втория IDE контролер\",\n"
-"   * \"d\" означава \"slave диск на втория IDE контролер\".\n"
-"\n"
-"\n"
-"При SCSI устройства, \"a\" означава \"първи твърд диск\", \"b\" означава "
-"\"втори твърд диск\" и т.н..\n"
-"\n"
-"\"Windows името\" е буквата на твърдия ви диск под Windows (първият диск "
-"или\n"
-"дял се нарича \"C:\")."
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-
-#: help.pm:591
-#, fuzzy, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Обикновено, DrakX би трябвало да избере правилната за вас клавиатура (в "
-"зависимост\n"
-"от езика, който сте избрали) и няма да се наложи да видите тази стъпка. "
-"Обаче може да\n"
-"нямате клавиатура съответстваща точно на вашия език: например, ако сте "
-"англоговорящ швед,\n"
-"може би ще искате клавиатурата ви да бъде шведска. Или ако говорите "
-"английски, но сте\n"
-"в Квебек, може би ще сте в същата ситуация. И в двата случая, ще трябва да "
-"се върнете\n"
-"към тази инсталационна стъпка и да изберете правилната клавиатура от "
-"списъка.\n"
-"\n"
-"Всичко, което трябва да направите, е да посочите предпочитаната клавиатурна "
-"наредба\n"
-"от списъка, който ще се появи пред вас.\n"
-"\n"
-"Ако имате клавиатура от език различен от този използван по подразбиране, "
-"цъкнете\n"
-"на бутона \"Напредничав\". Ще ви бъде предоставен пълен списък с "
-"поддържаните клавиатури."
-
-#: help.pm:609
-#, fuzzy, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"Моля, цъкнете на предпочитания език на инсталация и системна употреба.\n"
-"\n"
-"Цъкането на бутона \"Напредничав\" ще ви позволи да изберете други езици\n"
-"да бъдат инсталирани на работната ви станция. Избирането на други езици\n"
-"ще инсталира файлове специвични за езиците за системна документация и\n"
-"приложения. Например, ако имате потребители от Изпания на машината си,\n"
-"изберете английски като главен език в дървовидната форма и в секция\n"
-"\"Напредничав\" цъкнете на сивата звезда съответстваща на\n"
-"\"Испански|Испания\".\n"
-"Отбележете, че могат да бъдат инсталирани няколко езика. Веднъж избран\n"
-"някакъв локал, цъкнете бутона \"OK\", за да продължите."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr ""
-
-#: help.pm:650
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"По подразбиране, DrakX предполага че имате двубутонна мишка и ще включи\n"
-"симулиране на три бутона. DrakX автоматично разбира дали е PS/2, серийна "
-"или\n"
-"USB мишка.\n"
-"\n"
-"Ако искате да определите друг тип на мишката, изберете подходящ от списъка,\n"
-"който ще ви бъде представен.\n"
-"\n"
-"Ако изберете мишка различна от тази по подразбиране, ще ви бъде предоставен\n"
-"екран за проба. Използвайте бутоните и колелцето, за да проверите, че\n"
-"настройката е дора. Ако мишката не работи, както трябва, натиснете интервал\n"
-"или СЕ ВЪРНЕТЕ към \"Отказ\" и изберете пак."
-
-#: help.pm:681
-#, fuzzy, c-format
-msgid "with Wheel emulation"
-msgstr "3 бутона с емулация на колелце"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr ""
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Моля, изберете верния порт. Например, портът COM1 под Windows под GNU/Linux\n"
-"се нарича ttyS0."
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "идентификация"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-
-#: help.pm:742
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Дойде времето да изберете система за печат за вашия компютър.Другите\n"
-"операционни системи може да ви предлагат една,но ние ви предлагаме две.\n"
-"Всяка от тях е пригодена за даден тип конфигурация.\n"
-"\n"
-" * \"%s\"-- е акроним на \"print,do not queue\"(\"пачатай,не чакай\"),е "
-"идеалният\n"
-"избор,ако имате директна връзка с принтера,искате да го контролирате,или\n"
-"нямате мрежови принтери.(\"%s\" може да работи само в много прости\n"
-"ситуации и е някак бавен,когато се ползва в мрежа.) Препоръчително е да \n"
-"изполвате \"pdq\" ако нямате опит с GNU/Linux. \n"
-" * \"%s\" - `` Common Unix Printing System``(обичайна система за печат за "
-"Unix)\n"
-"е отличен избор,за печат както на собствения ви принтер,така и на друг,на\n"
-"половин свят разстояние.Тя е лесна за конфигуриране и може работи като\n"
-"клиент или сървър на архаичната\"lpd \",което я прави напълно съвместима\n"
-"с по-стари операционни системи,които може все още да се нуждаят от тази\n"
-"услуга.Въпреки че е доста мощна,основната инсталация е почти толкова \n"
-"лесна,колкото и тази на \"pdq\".Ако искате да емулирате \"lpd\" сървър,\n"
-"уверете се,че \"cups-lpd\" демона е пуснат.\"%s\" включва графични \n"
-"интерфейси за пречат и избор на опции за принтера,както и за\n"
-"конфигурирането му.\n"
-"\n"
-"Ако сега направите избор,а по-късно разберете,че не харесвате системата\n"
-"си за печат,можете да я смените като пуснете PrinterDrake от Мандрива "
-"линукс \n"
-"контролия център и цъкнете на \"експерт\"."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr ""
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Трудно"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-
-#: help.pm:786
-#, fuzzy, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\"ако намеря звукова карта,ще видите съобщение за това.\n"
-"Ако забележите,че намерената звукова карта не отговаря на истината,\n"
-"можете да цъкнете на бутона и да изберете друг драйвер."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Звукова карта"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Часова зона"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "TV карта"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "ISDN карта"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Графичен интерфейс"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Мрежа"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, fuzzy, c-format
-msgid "Proxies"
-msgstr "Профил "
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Ниво на защита"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Защитна стена"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Bootloader"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Услуги"
-
-#: help.pm:858
-#, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Изберете твърдия диск, който искате да изтриете, за да\n"
-"инсталирам новия ви Mandriva Linux дял. Внимание, всички данни на него ще "
-"бъдат загубени\n"
-"и няма да могат да се възстановят."
-
-#: help.pm:863
-#, fuzzy, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Цъкнете на \"%s\", ако искате да изтриете всички данни и\n"
-"дялове съществуващи на този твърд диск. Внимание, след цъкане на \"%s\", "
-"няма да можете да възстановите каквито и да било данни и дялове съществуващи "
-"на този твърд диск,\n"
-"включително каквито и да е Windows данни.\n"
-"\n"
-"Цъкнете \"%s\", за да отмените тази операция без загуба да данните и\n"
-"дяловете съществуващи на този твърд диск."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Следващ ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Предишен"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Нямам достъп да модулите на ядрото съответстващи на вашият (файл %s липсва), "
-"това означава, че вашето флопи не е синхронизирано с инсталационният носител "
-"(моля направете ново boot флопи)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Вие трябва също да форматирате %s"
-
-#: install_any.pm:406
-#, fuzzy, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Имате ли друг(и) ?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, fuzzy, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr "Имате ли някакъв %s интерфейс?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (http)"
-msgstr "Мрежа %s"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (ftp)"
-msgstr "Мрежа %s"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr ""
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Не беше открито устройство"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr ""
-
-#: install_any.pm:489
-#, fuzzy, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Не мога да направя 'fork': %s"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr ""
-
-#: install_any.pm:558
-#, fuzzy, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Не мога да намеря %s на %s"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Сменете CD-ROM !\n"
-"Моля, сложете CD-ROM озаглавен \"%s\" в устройството и натиснете Ok, когато "
-"сте готови."
-
-#: install_any.pm:738
-#, fuzzy, c-format
-msgid "Copying in progress"
-msgstr "Откриване в прогрес"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Избрали сте следния(те) сървър(и): %s\n"
-"\n"
-"\n"
-"Тези сървъри се активират по подразбиране. Те нямат известни проблеми със\n"
-"сигурността, но може да се намерят нови. В този случай, ще трябва да сте\n"
-"сигурни, че ще надграждате възможно най-бързо.\n"
-"\n"
-"\n"
-"Наистина ли искате да инсталирате тези сървъри ?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Следните пакети ще бъдат изтрити за да се позволи обновяване на системата: %"
-"s\n"
-"\n"
-"\n"
-"Действително ли искате да изтриете тези пакети?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Грешка при четенето на файла %s"
-
-#: install_any.pm:1559
-#, fuzzy, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Следните пакети ще трябва да се инсталират:\n"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Появи се грешка - не са открити валидни устройства, върху които да бъдат "
-"създадени нови файлови системи. Моля проверете твърдия си диск си за "
-"причината за този проблем"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, fuzzy, c-format
-msgid "Please choose a media"
-msgstr "Моля изберете"
-
-#: install_any.pm:1698
-#, fuzzy, c-format
-msgid "Bad media %s"
-msgstr "добавен източник %s"
-
-#: install_any.pm:1710
-#, fuzzy, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Файлът съществува. Да бъде ли презаписан?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Не мога да направя моментна \"снимка\" преди разделянето на диска "
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Снимки ще бъдат налични след инсталиране в %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Инсталация на система"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Конфигурация на система"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Част от хардуера на компютъра ви се нуждае от ``собствените си'' драйвери, "
-"за да работи.\n"
-"Можете да намерите повече информация за това на: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Трябва да имате root-дял.\n"
-"Затова създайте дял (или цъкнете на съществуващ).\n"
-"Тогава изберете действие ``Място на монтиране'' и го сложете `/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Нямате swap-дял\n"
-"\n"
-"Да продължа ли все пак ?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Трябва да имате FAT дял монтиран в /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Няма достатъчно място за създаване на нов дял"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Изпозване на съществуващ дял"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Няма дял, който мога да използвам"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Използвай за Windows дялът за loopback"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Кой дял искате да използвате за Linux4Win ?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Изберете големините"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Големина на root-дяла в MB: "
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Големина на swap-дяла в MB: "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Няма FAT дялове за използване като loopback (или няма достатъчно място на "
-"диска)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Кой дял желаете да промените?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"Не възможност за работа с вашия FAT дял, \n"
-"поради получената грешка: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Изчислява свободното място на Windows дял"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Вашият Windows дял е много фрагментиран, моля първо стартирайте ''defrag''"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ВНИМАНИЕ!\n"
-"\n"
-"DrakX трябва да прераздели Вашия Windows дял. Бъдете внимателни: тази "
-"операция е\n"
-"опасна. Ако още не сте го направили, трябва първо да пуснете scandisk (и\n"
-"евентуално да използвате defrag) под Windows върху този дял, тогава \n"
-"повторете инсталациаята. Би било добре да направите архив на данните си.\n"
-"Когато сте сигурни, натиснете ОК."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Колко искате да оставите за windows?"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "дял %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Изчислявам границите на Windows файловата система"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Неуспешно преразделяне на FAT: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Няма FAT дялове за смяна на големината (или няма достаъчно място)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Премахни Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "имате повече от един твърди дискове, кой да използвам за инсталацията?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ВСИЧКИ съществуващи дялове и данните върху тях на %s ще бъдат загубени"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Използвай fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Сега можете да разделите %s.\n"
-"Когато сте готови, не забравяйте да запишете използвайки `w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Не мога да намеря никакво място за инсталация"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Помощникът за разделине на дялове на DrakX намери следните решения:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Неуспешно разделяне на: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Включвам мрежата"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Изключване на мрежата"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, fuzzy, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Въведение\n"
-"\n"
-"Операционната система и различните компоненти достъпни в Mandriva Linux "
-"дистрибуцията по-долу ще се\n"
-"наричат \"Софтуерен Продукти\". Софтуерните Продукти включват, но не се "
-"ограничават само до, набора\n"
-"програми, методи, правила и документация отнасяща се до операционната "
-"система и различните\n"
-"компоненти на Mandriva Linux дистрибуцията.\n"
-"\n"
-"\n"
-"1. Лицензионен договор\n"
-"\n"
-"Моля, прочетете внимателно този документ. Този документ е лицензионен "
-"договор между вас и\n"
-"Mandriva S.A., който се отнася до Софтуерния Продукт. Чрез инсталирането, "
-"копирането\n"
-"или използването на Софтуерния Продукт по какъвто и да е начин вие изрично "
-"приемате и\n"
-"напълно се съгласявате да спазвате сроковете и условията на този Лиценз.\n"
-"Ако не се съгласявате с някоя част на Лиценза, нямате право да инсталирате, "
-"копирате или\n"
-"използвате Софтуерния Продукт. Опитите да се инсталира, копира или използва "
-"Софтуерния Продукт\n"
-"несъобразно със сроковете и условията на този Лиценз се забраняват и такива "
-"прекратяват правата\n"
-"ви по този Лиценз. При прекратяване на Лиценза, трябва незабавно да "
-"унижтожите всички\n"
-"копия на Софтуерния лиценз.\n"
-"\n"
-"\n"
-"2. Ограничена гаранция\n"
-"\n"
-"Софтуерните Продукти и приложената документация се предоставят \"такива "
-"каквито са\", без гаранция,\n"
-"в рамките на разрешеното от закона.\n"
-"Mandriva S.A., при никакви обстоятелства и в рамките на закона, не е "
-"отговорна за каквито да e\n"
-"умишлени, случайни, преки или косвени щети (включително загуба на данни за "
-"работа, прекратяване на,\n"
-"работа, финансови загуби, законни данъци и наказания в резултат на съдебно "
-"решение или каквато и да е\n"
-"друга произлизащи от това загуби) произтичащи от употребата или от "
-"невъзможността да се употреби\n"
-"Софтуерния Продукт, даже ако Mandriva S.A. да е известила за възможността "
-"или случването на такава загуба.\n"
-"\n"
-"ОГРАНИЧЕНА ОТГОВОРНОСТ СВЪРЗАНА С ПРИТЕЖАВАНЕТО ИЛИ ИЗПОЛЗВАНЕТО НА ЗАБРАНЕН "
-"СОФТУЕР В НЯКОИ СТРАНИ\n"
-"\n"
-"В рамките на закона, Mandriva S.A. и нейните дистрибутори няма при никакви "
-"условия да бъдат\n"
-"отговорни за каквито и да било умишлени, случайни, преки или косвени щети "
-"(включително загуба на данни\n"
-"за работа, прекратяване на, работа, финансови загуби, законни данъци и "
-"наказания в резултат на\n"
-"съдебно решение или каквато и да е друга произлизащи от това загуби) "
-"произтичащи от притежаването\n"
-"и употребата на софтуерни компоненти и от изтеглянето на софтуерни "
-"компоненти от сайтовете на Mandriva Linux,\n"
-"които са забранени в някои страни от местното законодателство.\n"
-"Тази ограничена отговорност се отнася до, но не само за, мощните "
-"криптографски компоненти включени\n"
-"в Софтуерния Продукт.\n"
-"\n"
-"\n"
-"3. GPL Лиценза и придружаващи лицензи\n"
-"\n"
-"Софтуерният Продукт се състои от компоненти създадени от различни хора или "
-"организации. Повечето от\n"
-"тези компоненти се управляват от сроковете и условията на GNU Общия Публичен "
-"Лиценз, оттук нататък наричан\n"
-"\"GPL\", или подобни нему лицензи. Повечето от тези лицензи ви позволяват да "
-"използвате, копирате, или\n"
-"редистрибутирате компонентите, които те покриват. Моля, прочетете внимателно "
-"сроковете и условията на\n"
-"лицензионния договор на всеки компонент преди да го използвате. Всякакви "
-"въпроси относно лиценза\n"
-"на компонентите би трябвало да бъдат насочени към съответния им автор, а не "
-"към Mandriva.\n"
-"Програмите разработени от Mandriva S.A. се управляват от GPL Лиценза. "
-"Документацията написана\n"
-"от Mandriva S.A. се управлява от специален лиценз. Моля, погледнете "
-"документацията за\n"
-"повече информация.\n"
-"\n"
-"\n"
-"4. Права за Интелектуална Собственост\n"
-"\n"
-"Всички права към компонентите на Софтуерния Продукт принадлежат на "
-"съответните им автори и са\n"
-"защитени от законите за интелектуалната собственост и за копиране прилагани "
-"за софтуерните програми.\n"
-"Mandriva S.A. запазва правото си да модифицира и пригодява Софтуерния "
-"Продукт, като цяло или на\n"
-"части, по всякакъв начин и с всякакви цели.\n"
-"\"Mandriva\", \"Mandriva Linux\" и свързаните логота са запазена марка на "
-"Mandriva S.A.\n"
-"\n"
-"\n"
-"5. Управляващи Закони\n"
-"\n"
-"Ако някоя част от този договор се води забранена, нелегална или неприложима "
-"според решение на съд,\n"
-"тази част се изключва от договора. Вие оставате ограничени от останалите "
-"приложими секции на договора.\n"
-"Сроковете и условията на този Лиценз се управляват от Законите на Франция.\n"
-"Всички спорове по условията на този лиценз би било добре да се отнесат до "
-"съда. Като крайна мярка,\n"
-"споровете ще бъдат отнасяни до подходящия правни съдилища на Париж - "
-"Франция.\n"
-"За всякакви въпроси по този документ, моля, свържете се с Mandriva S.A.\n"
-"\n"
-"ЗАБЕЛЕЖКА: Това е български приблизителен превод на документа, което "
-"означава, че той\n"
-"вероятно не е достатъчно точен. Като по-достоверен източник ползвайте "
-"неговия оригинал на\n"
-"английски.\n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Внимание\n"
-"\n"
-"Моля, прочетете условията по-долу. Ако не сте съгласни с някое от тях,\n"
-"не можете да продължите инсталацията на следващия CD носител. Натиснете\n"
-"'Откажи', за да продължите инсталацията без тези носители.\n"
-"\n"
-"\n"
-"Някои компоненти съдържащи се в следващия CD носител не са разпространяват\n"
-"под GPL Лиценза или подобен такъв. Всеки такъв компонент е под условията\n"
-"и положенията на специфичния му лиценз. Моля, прочетете внимателно и изцяло\n"
-"тези специфични лицензи преди да използвате или разпространявате "
-"споменатите\n"
-"компоненти.\n"
-"Такива лицензи по принцип предотвратява преноса, копирането (освен с цел\n"
-"съхранение), разпространяването, обратния инженеринг, деасемблирането\n"
-"декомпилацията или модификацията на компонентите.\n"
-"Всяко нарушаване на спогодбата незабавно преустановява правата ви по\n"
-"специфичния лиценз. Освен ако специфичния лиценз ви дава такива права,\n"
-"обикновено не можете да инсталирате програмите на повече от една система\n"
-"или да ги пригаждате за използване в мрежа. Ако не сте сигурни, моля\n"
-"свържете се с дистрибуция или редактора на компонена.\n"
-"Прехвърлянето на трети лица или копирането на всяка компонента, включително\n"
-"на документацията, обикновено са забранени.\n"
-"\n"
-"\n"
-"Всички права на компонентите от следващия CD носител принадлежат на\n"
-"съответните им автори и са защитени като интелектуална собственост от\n"
-"законите за авторски права приложими за софтуерните програми.\n"
-
-#: install_messages.pm:131
-#, fuzzy, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Поздравления, инсталацията е преключена.\n"
-"Премахнете стартовото устройство и натисене Enter за да рестартирайте.\n"
-"\n"
-"\n"
-"За информация относно поправки, на тази версия на Mandriva Linux,\n"
-"се консултирайте с Errata, на адрес : \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Информация за настройване на системата ви можете да намерите в\n"
-"слединсталационната глава от Official Mandriva Linux User's Guide."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Дублирай точката на монтиране %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Някои важни пакети не се инсталираха както трябва.\n"
-"Или CDROM устройството ви или компакт диска ви е дефектен.\n"
-"Проверете компакт диска на инсталирания компютър използвайки \"rpm -qpl "
-"media/main/*.rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Навлизам в етап `%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Избор на група пакети"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Обща големина: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Лош пакет"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Версия: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Размер: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d КБ\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Важност:"
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Не можете да отбележете/деотбележете този пакет"
-
-#: install_steps_gtk.pm:335
-#, fuzzy, c-format
-msgid "due to missing %s"
-msgstr "липсва kdesu"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "поради неопределен %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr ""
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr ""
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"Не можете да оставите пакета немаркиран, защото нямате място да го "
-"инсталирате"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Следните пакети ще бъдат инсталирани"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Следните пакети ще бъдат премахнати"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Това е нужен пакет, не може да бъде немаркиран"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Не можете да оставите този пакет немаркиран. Той вече е инсталиран"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Този пакет трябва да бъде обновен\n"
-"Сигурни ли сте, че искате да го изключите ?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Не можете да изключите този пакет. Той трябва да бъде обновен"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Покажи автоматично отбелязаните пакети"
-
-#: install_steps_gtk.pm:389
-#, fuzzy, c-format
-msgid "Load/Save selection"
-msgstr "Избор на пакети"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Обновяване на избора на пакети"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Миминална инсталация"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Изберете пакетите, които искате да инсталирате"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Инсталирам"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Пресмятане"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Без подробности"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Оставащо време "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Моля, изчакайте, подготвяне на инсталацията"
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d пакета"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Инсталиране на пакета %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Откажи"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, fuzzy, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Сменете CD-ROM !\n"
-"\n"
-"Моля, сложете CD-ROM озаглавен \"%s\" в устройството и натиснете Ok, когато "
-"сте готови.\n"
-"Ако го нямате, натиснете Отмяна, за да избегнете инсталирането от този CD-"
-"ROM."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Появи се грешка при поръчването на пакетите:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Да продължа ли все пак ?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Появи се грешка при инсталиране на пакетите:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "не е конфигуриран"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Лицензионен договор"
-
-#: install_steps_interactive.pm:89
-#, fuzzy, c-format
-msgid "Release Notes"
-msgstr "Версия:"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Моля, изберете подреждане на клавиатурата."
-
-#: install_steps_interactive.pm:121
-#, fuzzy, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Ето пълен списък на достръпните страни"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Инсталирай/Обнови"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Това нова инсталация ли е или обновяване ?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Обновява %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Ключ за криптиране на %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Моля, изберете тип на мишката."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Порт на мишката"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Моля, изберете към кой сериен порт е свързана мишката ви."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Имитация на бутони"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Имитация на 2 бутона"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Имитация на 3 бутона"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Настройка на PCMCIA картите ..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Настройка на IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "няма дялове на разположение"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Претърсване на дяловете за намиране на точки на монтиране"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Изберете места за монтиране"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Няма свободно място за 1 МБ стартиращо поле ! Инсталацията ще продължи, но, "
-"за да стартирате системата си, ще трябва да създадете стартиращо поле в "
-"DiskDrake"
-
-#: install_steps_interactive.pm:317
-#, fuzzy, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Няма свободно място за 1 МБ стартиращо поле ! Инсталацията ще продължи, но, "
-"за да стартирате системата си, ще трябва да създадете стартиращо поле в "
-"DiskDrake"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Изберете дяловете, които искате да форматирате"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Проверка за лоши сектори ?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Неуспешна проверка на файлва система %s. Искате ли да оправите грешките? "
-"(бъдете внимателни, може да загубите данни)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Няма достатъчно swap за приключване на инсталацията, моля добавете малко"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Търся налични пакети и препостроявам rpm базата данни..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Търся налични пакети..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Търси във вече инсталираните пакети..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Търся пакети за обновяване"
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Изберете огледален сървър,от който да получите пакетите"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Системата ви няма достатъчно място за инсталация или обновяване (%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, fuzzy, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Може изберете зареждане или запис на избора на пакети на флопи.\n"
-"Форматът е същият като auto_install генерираните дискети."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Натовареност"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Запазва"
-
-#: install_steps_interactive.pm:505
-#, fuzzy, c-format
-msgid "Bad file"
-msgstr "Зареждане на файл"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Избраната големина е по-голяма от достъпното пространство"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Тип инсталация"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Вие не сте избрали никаква група от пакети.\n"
-"Моля, изберете минималната инсталация кояти искате:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "С базова документация (препоръчва се!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Наистина минимална инсталация (особенно без urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Всички"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ако имате всички CD-та от списъка по-горе, натиснете Ok.\n"
-"Ако нямате нито едно от тези CD-та, натиснете Отмяна.\n"
-"Ако ви липсват някои CD-та, махнете ги, и натиснете Ok. "
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM озаглавен \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Подготвям инсталацията"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Инсталирам пакет %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "След инсталационна настройка"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Свързване с огледалния сървър за получаване на списъка с пакетите"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Не мога да се свръжа с огледален сървър' %s"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Желаете ли да опитате пак ?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Коя е времевата ви зона ?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Автоматична синхронизация на времето (използва NTP)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP сървър"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Обобщение"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Система"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Хардуер"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Отдалечен CUPS сървър"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Няма принтер"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Имате ли ISA звукова карта?"
-
-#: install_steps_interactive.pm:1028
-#, fuzzy, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Изпълнете \"sndconfig\" след инсталация за да конфигурирате вашата звукова "
-"карта"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Няма открита звукова карта. Опитайте \"harddrake\" след инсталацията"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Графичен интерфайс"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Мрежа и интернет"
-
-#: install_steps_interactive.pm:1073
-#, fuzzy, c-format
-msgid "configured"
-msgstr "пренастройка"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Сигурност"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "активирано"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "изключен"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Зареждане"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s на %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Услуги: %d активирани от %d регистрирани"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Вие не сте конфигурирали X. Сигурни ли сте, че искате това?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Подготовка на bootloader"
-
-#: install_steps_interactive.pm:1230
-#, fuzzy, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Изглежда имате старовремска или неизвестна\n"
-"машина, на която yaboot няма да проработи.\n"
-"Инсталацията ще продължи, но ще трябва\n"
-"да иползвате BootX, за да стартирате машината си"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Искате ли да използвате aboot ?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Грешка при инсталиране на aboot, \n"
-"да се опитам ли да продължа инсталацията дори, ако това унижтожи първия дял ?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Сложете празна дискета в устройство %s"
-
-#: install_steps_interactive.pm:1294
-#, fuzzy, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Сложете стартиращата дискета в устройство %s"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Подготвям дискета с автоматична инсталация"
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Някои етапи не са завършени.\n"
-"\n"
-"Наистина ли искате да излезете сега ?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Подготви дискета за автоматична инсталация"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Автоматичната инсталация може да бъде напълно автоматизирана,\n"
-"в такъв случай ще превземе твърдия ви диск !!!\n"
-"(това е за предназначено за инсталиране на друга машина).\n"
-"\n"
-"Може би искате да повторите инсталацията.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> между елементите  | <Space> избира  | <F12> следващ екран"
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Изберете файл"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Добавя"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Модифицира"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Премахва"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Базов"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Завърши"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Направи"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Лош избор, опитайте отново\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Вашият избор ? (по подразбиране е %s)"
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Записите които вие ще трябва да запълните:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Вашият избор ? (по подразбиране е `%s')"
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Бутон `%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Искате ли да цъкнете на този бутон?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Вашият избор ? (по подразбиране е `%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Има много неща за избор от (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> забележка, променен етикет:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr ""
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Чешка (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Немска"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Дворак"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Испанска"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Финландска"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Френска"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Норвежка"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Полска"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Руска"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Шведска"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "UK клавиатура"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "US клавиатура"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Албанска"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Арменска (стара)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Арменска (пишеща машина)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Арменска (фонетичен)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Арабски"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Азербайджанска (латиница)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Белгийска"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Бенгалска (Inscript-подредба)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Бенгалска (Probhat-подредба)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Българска (фонетичен)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Българска (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Бразилска (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Босненска"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Беларуска"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Швейцарска (немска наредба)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Швейцарска (френски наредба)"
-
-#: keyboard.pm:204
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Арабски"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Чешка (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Немска (без неработещи клавиши)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Давенаджари"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Датска"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Дворак (US)"
-
-#: keyboard.pm:213
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Дворак (Норвежка)"
-
-#: keyboard.pm:215
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Дворак (Норвежка)"
-
-#: keyboard.pm:217
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Дворак (US)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Дворак (Норвежка)"
-
-#: keyboard.pm:220
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Дворак (Шведска)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Дворак (Шведска)"
-
-#: keyboard.pm:222
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Босненска"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Естонска"
-
-#: keyboard.pm:227
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Гръцка"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Грузинска (\"Руска\" наредба)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Грузинска (\"Латинска\" наредба)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Гръцка"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr ""
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Гуаджарати"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Гурмукчи"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Хърватска"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Унгарска"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr ""
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Израелска"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Израелска (фонетична)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Иранска"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Исландска"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Италианска"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Инуктитут"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Японска 106 клавиша"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Канада"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Корейска клавиатура"
-
-#: keyboard.pm:254
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Арабски"
-
-#: keyboard.pm:255
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "UK клавиатура"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Латиноамериканска"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Лаоска"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Литвийска AZERTY (стара)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Литвийска AZERTY (нова)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Литвийска \"числова редица\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Литвийска \"фонетичен\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Латвийска"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Малайлам"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Македонска"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Майнмар (бирманска)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Монголска (кирилица)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Малтийска (UK)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Малтийска (US)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Холандска"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Орийска"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Полска (QWERTY наредба)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Полска (QWERTZ наредба)"
-
-#: keyboard.pm:277
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Полска"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Португалска"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Канадска (Квебек)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Румънска (qwertz)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Румънска (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Руска (фонетична)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Саами (норвежка)"
-
-#: keyboard.pm:287
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Саами (норвежка)"
-
-#: keyboard.pm:289
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Тайванска клавиатура"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Словенска"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Словашка (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Словашка (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Сръбска (кирилица)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Сирийски"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Сирийски (фонетичен)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Телугу"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Тамилска (ISCII-подредба)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Тамилска (пишеща машина)"
-
-#: keyboard.pm:304
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Тайванска клавиатура"
-
-#: keyboard.pm:305
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Тайванска клавиатура"
-
-#: keyboard.pm:307
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Тайванска клавиатура"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Таджикистанска клавиатура"
-
-#: keyboard.pm:315
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Немска"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Турска (традиционен \"F\" модел)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Турска (модерен \"Q\" модел)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Украинска"
-
-#: keyboard.pm:322
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Орийска"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US клавиатура (международна)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Узбекистанска (кирилица)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Виетнамска \"числова редица\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Югославска (латиница)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Десен Alt клавиш"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Двата Shift клавиша едновременно"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control и Shift клавиши едновремено"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock клавиш"
-
-#: keyboard.pm:339
-#, fuzzy, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Ctrl и Alt клавиши едновременно"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl и Alt клавиши едновременно"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt и Shift клавиши едновременно"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" клавиш"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Ляв \"Windows\" клавиш"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Десен \"Windows\" клавиш"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Двата Ctrl клавиша едновременно"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Двата Alt клавиша едновременно"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Ляв Shift клавиш"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Десен Shift клавиш"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Ляв Alt клавиш"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Ляв клавиш Ctrl"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Десен Control клавиш"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Тук може да изберете клавиш или клавишна комбинация, която \n"
-"ще ви позволи да избирате различни клавиатурни подредби\n"
-"(напр. latin и не latin)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Андора"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Обединени Арабски Емирства"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Афганистан"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Антигуа и Барбуда"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Ангила"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Албания"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Армения"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Холандски Антили"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Ангола"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Антарктика"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Аржентина"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Американска Самоа"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Аруба"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Азербайджан"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Босна и Херцеговина"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Барбадос"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Бангладеш"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Буркина Фасо"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "България"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Бахрейн"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Бурунди"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Бенин"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Бермуда"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Бруней"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Боливия"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Бахами"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Бутан"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Остров Бувет"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Ботсвана"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Беларус"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Белиз"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Кокосови Острови"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Конго (Киншаса)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Централноафриканска Република"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Конго (Бразивил)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Кот д'ивоар"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Острови Кук"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Чили"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Камерун"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Китай"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Колумбия"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Сърбия и Черна Гора"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Куба"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Капо Верде"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Коледни Острови"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Кипър"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Джибути"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Доминика"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Доминиканска Република"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Алжир"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Еквадор"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Египет"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Западна Сахара"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Еритрея"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Етиопия"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Фиджи"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Фолклендски Острови (Малвини)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Микронезия"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Острови Фаро"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Габон"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Англия"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Гренада"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Грузия"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Френска Гвиана"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Гана"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Гибралтар"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Гренландия"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Гамбия"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Гвинея"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Гваделупа"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Екваториална Гвинея"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Южни Сандвичеви Острови и Южна Джорджия"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Гватемала"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Гуам"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Гвинея-Бисау"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Гияна"
-
-#: lang.pm:286
-#, fuzzy, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Хонг Конг"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Хърд и МакДоналд Острови"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Хондурас"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Хърватия"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Хаити"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Индонезия"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Индия"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Английски територии в Индийския океан"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Ирак"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Иран"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Исландия"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Ямайка"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Йордания"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Кения"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Киргизтан"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Камбоджа"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Кирибати"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Комори"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Свети Китс и Невис"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Корея (Северна)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Корея"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Кувейт"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Кайманови Острови"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Казахстан"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Лаос"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Ливан"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Санта Лучия"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Лихтенщайн"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Шри Ланка"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Либерия"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Лесото"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Литва"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Люксембург"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Латвия"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Либия"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Мароко"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Монако"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Молдова"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Мадагаскар"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Маршалови Острови"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Македония"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Мали"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Мианмар"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Монголия"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Северни Марианови Острови"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Мартиника"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Мавритания"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Монсерат"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Малта"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Мавриций"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Малдиви"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Малави"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Мексико"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Малайзия"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Мозамбик"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Намибия"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Нова Каледония"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Нигер"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Норфолк Остров"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Нигерия"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Никарагуа"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Непал"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Науру"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Нию"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Оман"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Панама"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Перу"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Френска Полинезия"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Папуа Нова Гвинея"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Филипини"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Пакистан"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Свети Пиер и Микелон"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Питкеърн"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Пуерто Рико"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Палестина"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Парагвай"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Палау"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Катар"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Риюниън"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Румъния"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Руанда"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Саудитска Арабия"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Соломонови Острови"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Сейшели"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Судан"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Сингапур"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Света Елена"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Словения"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Свалбард и Ян Майен Острови"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Сиера Леоне"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "Сан Марино"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Сенегал"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Сомалия"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Суринам"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Сао Томе и Принсипи"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "Ел Салвадор"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Сирия"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Свазиленд"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Тюрк и Кайкос Острови"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Чад"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "Франция Южни Територии"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Того"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Таджикистан"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Токелау"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Източен Тимор"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Туркменистан"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Тунис"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Тонга"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Турция"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Тринидад и Тобаго"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Тувалу"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Танзания"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Украйна"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Уганда"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Малки Острови по крайбрежието на САЩ"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Уругвай"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Узбекистан"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Ватикана"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Свети Винсент и Гренадин"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Венецуела"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Вирджински Острови (Британски)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Вирджински Острови (САЩ)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Виетнам"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Вануату"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Уолис и Футуна Острови"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Самоа"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Йемен"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Майот"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Замбия"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Зимбабве"
-
-#: lang.pm:1073
-#, fuzzy, c-format
-msgid "You should install the following packages: %s"
-msgstr "Инсталиране на пакета %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Добре дошли в %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "\"Омагьосан кръг\" от монтирания: %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Първо премахни логичните дялово\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Параметри"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr ""
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Настройка на модул"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Вие може да конфигурирате всеки параметър на модулът тук."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Намерени са %s интерфейси"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Имате ли друг(и) ?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Имате ли някакъв %s интерфейс?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Виж хардуерната информация"
-
-#: modules/interactive.pm:82
-#, fuzzy, c-format
-msgid "Installing driver for USB controller"
-msgstr "Инсталиране на драйвер за %s платка %s"
-
-#: modules/interactive.pm:83
-#, fuzzy, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Инсталиране на драйвер за %s платка %s"
-
-#: modules/interactive.pm:84
-#, fuzzy, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Инсталиране на драйвер за %s платка %s"
-
-#: modules/interactive.pm:85
-#, fuzzy, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Инсталиране на драйвер за %s платка %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Инсталиране на драйвер за %s платка %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(модул %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Сега можете да подадете опциите му до модула %s.\n"
-"Опциите са във формат ``име=стойност име2=стойност2 ...''.\n"
-"Например: ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Опции на модула:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Кой %s драйвер да пробвам ?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"В някои случаи, %s драйверът се нуждае от допълнителна информация, за\n"
-"да работи коректно, въпреки че нормално работи и без нея. Желаете ли "
-"даподадете\n"
-"допълнителни опции за него или да разрешите на драйвера да потърси "
-"информацията\n"
-"от която се нуждае ? По принцип това може да забие компютъра ви, но няма да "
-"го повреди."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Автоматично засичане"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Задай опции"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Зареждането на модула %s не успя.\n"
-"Искате ли да опитате отново с други параметри ?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "номер"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d със запетая разделени номера"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d със запетая разделен низ"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "номера разделени със запетая"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "низове разделени със запетая"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Мишка на Sun"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Стандартна"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Обикновенна PS2 мишка"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Автоматично"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington THinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genuis NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 бутон"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Обикновенна 2-бутонна мишка"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Обикновенна 3-бутонна мишка с емулация на колелце"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Wheel"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "серийна"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Обикновенна 3-бутонна мишка"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, fuzzy, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Series с емулация на колелце"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (серийна, от стария тип C7)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Mouse (серийна, от стария тип C7) с емулация на колелце"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington THinking Mouse с колелце"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "BUS мишка"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 бутона"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 бутона"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3 бутона с емулация на колелце"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Universal"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr ""
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "няма"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Без мишка"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr ""
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Моля, пробвайте мишката си"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "За да активирате мишката си,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "БУТНЕТЕ ТОПЧЕТО !"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "използвай PPPOE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "използвай PPPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "използвай DHCP"
-
-#: network/adsl.pm:22
-#, fuzzy, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, fuzzy, c-format
-msgid " - detected"
-msgstr "засечена "
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (използва PPPoA) USB"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (използва DHCP) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Свържи се към Интернет"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"Най-честия начин за свързване чрез ADSL е PPPOE.\n"
-"Някои връзки използват PPTP, а малко използват DHCP.\n"
-"Ако не знаете, изберете 'използвай PPPOE'."
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, fuzzy, c-format
-msgid "ADSL connection type:"
-msgstr "ADSL връзка"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Web Сървър"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Domain Name Server"
-
-#: network/drakfirewall.pm:22
-#, fuzzy, c-format
-msgid "SSH server"
-msgstr "SSH Сървър"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "FTP сървър"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Пощенски сървър"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP и IMAP сървър"
-
-#: network/drakfirewall.pm:42
-#, fuzzy, c-format
-msgid "Telnet server"
-msgstr "X сървър"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, fuzzy, c-format
-msgid "CUPS server"
-msgstr "DNS сървър"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr ""
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr ""
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"Настройчик за малка защитна стена\n"
-"\n"
-"Това настройва персонална защитна стена за тази Mandriva Linux машина.\n"
-"За мощно постветено на защитата решение, моле, погледнете специализираната\n"
-"Mandriva Security Firewall дистрибуция."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall конфигурация\n"
-"\n"
-"Убедете се, че вие имате конфигуриран Интернет/Интранет достъп с\n"
-"drakconnect преди да правите други неща по-нататък."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Вие може да въведете други портове. \n"
-"Валидни са например: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Погледнете в /etc/services за информация"
-
-#: network/drakfirewall.pm:188
-#, fuzzy, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Зададен е грешен порт: %s.\n"
-"Форматът е \"port/tcp\" или \"port/udp\", \n"
-"където порт е между 1 и 65535."
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Всичко (без firewall)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Други портовете"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Не знам"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Ръчно"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, fuzzy, c-format
-msgid "Manual choice"
-msgstr "ръчно"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Вътрешна ISDN карта"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Ръчна настройка"
-
-#: network/netconnect.pm:105
-#, fuzzy, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Автоматичен IP адрес"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr ""
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Протокол за останалия свят"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Протокол Европа (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Протокол за останалия свят\n"
-" без D-Канал (наета линия)"
-
-#: network/netconnect.pm:153
-#, fuzzy, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel speedtouch USB"
-
-#: network/netconnect.pm:154
-#, fuzzy, c-format
-msgid "Sagem USB modem"
-msgstr "Системен режим"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr ""
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr ""
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:161
-#, fuzzy, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Ръчна настройка"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr ""
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr ""
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr ""
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, fuzzy, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Ethernet карта"
-
-#: network/netconnect.pm:170
-#, fuzzy, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Ethernet карта"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr ""
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr ""
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr ""
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr ""
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Базирана на скрипт"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Базирана на терминал"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, fuzzy, c-format
-msgid "Network & Internet Configuration"
-msgstr "Настройка на мрежата"
-
-#: network/netconnect.pm:300
-#, fuzzy, c-format
-msgid "(detected on port %s)"
-msgstr "засечен на порт %s"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, fuzzy, c-format
-msgid "(detected %s)"
-msgstr "засечена %s"
-
-#: network/netconnect.pm:302
-#, fuzzy, c-format
-msgid "(detected)"
-msgstr "засечена "
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "LAN връзка"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Безжична връзка"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL връзка"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Кабелна връзка"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN връзка"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Модем"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Изберете връзката, който искате да използвате"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Сега ще настроим %s връзката.\n"
-"\n"
-"\n"
-"\n"
-"Натиснете \"%s\", за да продължите."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Настройка на връзката"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Моля, попълнете или проверете полето по-долу"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ на картата"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Памет (DMA) на картата"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "IO на картата"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 на картата"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 на картата"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Личния ви телефонен номер"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Име на доставчика (напр. provider.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Телефонен номер на доставчика"
-
-#: network/netconnect.pm:358
-#, fuzzy, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "1-ви DNS на доставчика (по желание)"
-
-#: network/netconnect.pm:359
-#, fuzzy, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "2-ри DNS на доставчика (по желание)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Режим на набиране"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Скорост на връзката"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Timeout на връзката (в сек)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Име на акаунта (потебителско име)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Парола на акаунта"
-
-#: network/netconnect.pm:382
-#, fuzzy, c-format
-msgid "Cable: account options"
-msgstr "Опции за избиране по телефон"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, fuzzy, c-format
-msgid "Select the network interface to configure:"
-msgstr "Изберете мрежов интерфейс"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Мрежово у-во"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Външен ISDN модем"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Изберете устройство !"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Настройка на IDSN"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Какъв тип карта имате ?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Ако имате ISA карта, стойностите на следващия екран трябва да са верни.\n"
-"\n"
-"Ако имате PCMCIA карта, ще трябва да знаете IRC и IO на картата си.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Нататък"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Отказ"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Коя от следните ISDN картати е вашата ?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Драйвер"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Какъв протокол желаете да промените ?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Протокол"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Посочете доставчика си.\n"
-" Ако не е в списъка, изберете Unlisted"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, fuzzy, c-format
-msgid "Provider:"
-msgstr "Профил: "
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Вашият модем не се поддържа от системата.\n"
-"Погледнете в http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, fuzzy, c-format
-msgid "Select the modem to configure:"
-msgstr "Изберете мрежов интерфейс"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Моля, изберете сериен порт към който свързан модемът ви."
-
-#: network/netconnect.pm:658
-#, fuzzy, c-format
-msgid "Select your provider:"
-msgstr "Изберете принтерен spooler"
-
-#: network/netconnect.pm:682
-#, fuzzy, c-format
-msgid "Dialup: account options"
-msgstr "Опции за избиране по телефон"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Име на връзката"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Телефонен номер"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Потребителско име"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, fuzzy, c-format
-msgid "Dialup: IP parameters"
-msgstr "Параметри"
-
-#: network/netconnect.pm:705
-#, fuzzy, c-format
-msgid "IP parameters"
-msgstr "Параметри"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP адрес"
-
-#: network/netconnect.pm:707
-#, fuzzy, c-format
-msgid "Subnet mask"
-msgstr "Маска на подмрежа:"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr ""
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "Домейн"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Име на домейна"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Първи DNS сървър (по избор)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Втори DNS сървър (по избор)"
-
-#: network/netconnect.pm:726
-#, fuzzy, c-format
-msgid "Set hostname from IP"
-msgstr "Име на хост за принтера или IP"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Gateway"
-
-#: network/netconnect.pm:739
-#, fuzzy, c-format
-msgid "Gateway IP address"
-msgstr "IP адрес"
-
-#: network/netconnect.pm:775
-#, fuzzy, c-format
-msgid "ADSL configuration"
-msgstr "Настройка на LAN"
-
-#: network/netconnect.pm:819
-#, fuzzy, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Моля, изберете вашата страна."
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, fuzzy, c-format
-msgid "Use a floppy"
-msgstr "Запази на дискета"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, fuzzy, c-format
-msgid "Use my Windows partition"
-msgstr "Изчислявам границите на Windows файловата система"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr ""
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr ""
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr ""
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr ""
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr ""
-
-#: network/netconnect.pm:972
-#, fuzzy, c-format
-msgid "Encapsulation:"
-msgstr "Ключ за криптиране"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, fuzzy, c-format
-msgid "Could not install the %s package!"
-msgstr "Инсталиране на пакета %s"
-
-#: network/netconnect.pm:1048
-#, fuzzy, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Име на Zeroconf хост:"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, fuzzy, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Настройка на мрежовото устройство %s"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Моля, въведете IP настройките за тази машина.\n"
-"Всяко устройство трябва да бъде въведено като IP адрес\n"
-"с точково-десетично означение (например, 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Получаване на име от DHCP адрес"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "Име на DHCP хост"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Мрежова маска"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Проследяване на ID на мрежовата карта (полезно при лаптопи)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Мрежов Hotplugging"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Изпълнение при стартиране"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, fuzzy, c-format
-msgid "Metric"
-msgstr "ограничи"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP клиент"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Timeout на връзката (в сек)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "DNS сървър IP"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP адресът трябва да бъде във формат 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Gateway адреса трябва да бъде във формат 1.2.3.4"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr ""
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr ""
-
-#: network/netconnect.pm:1167
-#, fuzzy, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Избор на случаен драйвер"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, fuzzy, c-format
-msgid "Install a new driver"
-msgstr "Инсталиране на системата"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, fuzzy, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "Моля, въведете име на хост или IP."
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, fuzzy, c-format
-msgid "Operating Mode"
-msgstr "Разширени функиции"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Управляем"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Главен"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Повтаряем"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Вторичен"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Автоматично"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr ""
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, fuzzy, c-format
-msgid "Network ID"
-msgstr "Мрежа"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr ""
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr ""
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr ""
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr ""
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, fuzzy, c-format
-msgid "Fragmentation"
-msgstr "Игрална станция"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Моля, въведете host name за машината.\n"
-"Host името трябва да буде напълно квалифицирано име,\n"
-"като ``mybox.mylab.myco.com''.\n"
-"Можете също да въведете IP адреса на Вашия gateway, ако имате такъв"
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, fuzzy, c-format
-msgid "Host name (optional)"
-msgstr "Първи DNS сървър (по избор)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Име на хост:"
-
-#: network/netconnect.pm:1370
-#, fuzzy, c-format
-msgid "DNS server 1"
-msgstr "DNS сървър"
-
-#: network/netconnect.pm:1371
-#, fuzzy, c-format
-msgid "DNS server 2"
-msgstr "DNS сървър"
-
-#: network/netconnect.pm:1372
-#, fuzzy, c-format
-msgid "DNS server 3"
-msgstr "DNS сървър"
-
-#: network/netconnect.pm:1373
-#, fuzzy, c-format
-msgid "Search domain"
-msgstr "NIS домейн"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (напр. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Gateway устройство"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS сървъра трябва да бъде във формат 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway адреса трябва да бъде във формат 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Име на Zeroconf хост:"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Настроили сте няколко начина за връзка към Интернет.\n"
-"Изберете този, който искате да използвате.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Интернет връзка"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Настройката завърши,желаете ли да я приложите ?"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Искате ли да стартирате връзката си при зареждане ?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Искате ли да стартирате връзката си при зареждане ?"
-
-#: network/netconnect.pm:1478
-#, fuzzy, c-format
-msgid "Automatically at boot"
-msgstr "Изпълнение при стартиране"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, fuzzy, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Искате ли да стартирате връзката си при зареждане ?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Мрежата се нуждае от престартиране. Искате ли да я престартирам?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Настройка на мрежата"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Изникна проблем при рестартирането на мрежата:\n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Искате ли сега да опитате връзка към Интернет ?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Изпробване на връзката..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Системата в момента е свързана към Интернет."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "За ваша сигурност, сега тя ще бъдете отвързана."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Системата не изглежда свързана към Интернет.\n"
-"Опитайте се да пренастроите връзката."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Поздравления, мрежовата и интернет настройката е завършена.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"След като стане това, препоръчваме ви да рестартирате X\n"
-"средата си, за да избегнете проблеми със смяната името на хоста."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Появи се проблем при конфигурацията.\n"
-"Проверете вашата връзка през net_monitor или mcc. Ако вашата връзка не "
-"работи , вие трябва да преконфигурирате."
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Тъй като правите мрежова инсталация, мрежата ви вече е настроена.\n"
-"Цъкнете Ok, за да запазите настройката, или Отмяна, за да пренастоите "
-"Интернет и мрежовата си връзка.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Настройка на proxy"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy-сървъра трябва да е http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL трябва да е започва с 'ftp:' или 'http:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Открита е настройка на Защитна Стена !"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Внимание ! Открита е настройка на Защитна Стена. Може да се наложи някаква "
-"ръчна поправка след инсталацията."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Сложете дискета във флопито"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Сложете FAT форматирана дискета в устройство %s с %s в главната директория и "
-"натиснете %s"
-
-#: network/tools.pm:196
-#, fuzzy, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Къде искате да монтирате устройство %s ?"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "монтирането не успя: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Разширени дялове не се поддържат на тази платформа"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Имате празнина в таблицата с дяловете, но не мога да я използвам.\n"
-"Единственият начин е да преместите главните си дялове, за да имате празно "
-"място след extended-дяловете"
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Възстановяването от файла %s не успя: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Лош backup-файл"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Грешка при запис във файла %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Нещо лошо става с устройството ви.\n"
-"Теста за целост на данните пропадна.\n"
-"Това значи, че писането на каквото и било по диска ще превръща\n"
-"произволно в боклук"
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "нужен"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "важен"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "много добър"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "добър"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "става"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "Изпращам файлове..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(на %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(на тази машина)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Настроено на други машини"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "На CUPS сървър \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (По подразбиране)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Печатай, Без Опашка"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Линеен Принтерен Демон"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Ново поколение"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Обща Unix Принтерна Система"
-
-#: printer/data.pm:151
-#, fuzzy, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Обща Unix Принтерна Система"
-
-#: printer/data.pm:152
-#, fuzzy, c-format
-msgid "Remote CUPS"
-msgstr "Отдалечен CUPS сървър"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Неизвестен Модел"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Локален принтер"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Отдалечен принтер"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Принтер на отдалечен CUPS сървър"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Принтер на отдалечен LPD сървър"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Мрежов принтер (TCP/Socket)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Принтер на SMB/Windows 95/98/NT сървър"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Принтер на NetWare сървър"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Въведете URI на печатащо устройство"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Прекарай заданието през команда"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "препоръчително"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Неизвестен модел"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, fuzzy, c-format
-msgid "Configured on this machine"
-msgstr "(на тази машина)"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " на паралелен порт #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", USB принтер #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", USB принтер"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", HP пример на паралелен порт"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", HP принтер на USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", HP принтер на HP JetDirect"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", HP принтер"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", многофункционално устройство на на паралелен порт #%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", многофункционално устройство на паралелен порт"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", многофункционално устройство на USB"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", многофункционално устройство на HP JetDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", многофункционално устройство"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", печат на %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " на LPD сървър \"%s\", принтер \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP хост \"%s\", порт %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " на SMB/Windows сървър \"%s\", поделен \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " на Novell сървър \"%s\", принтер \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", използва команда %s"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Паралелен порт #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "USB принтер #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "USB принтер"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "HP пример на паралелен порт"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "HP принтер на USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "HP принтер на HP JetDirect"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "HP принтер"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Многофункционално устройство на на паралелен порт %s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "многофункционално устройство на паралелен порт"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "Многофункционално устройство на USB"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "Многофункционално устройство на HP JetDirect"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Многофункционално устройство"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Печат на %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "LPD сървър \"%s\", принтер \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "TCP/IP хост \"%s\", порт %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "SMB/Windows сървър \"%s\", дял \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Novell сървър \"%s\", принтер \"%s\""
-
-#: printer/main.pm:481
-#, fuzzy, c-format
-msgid "Uses command %s"
-msgstr ", използва команда %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "Адрес: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "'Raw' принтер (Без драйвер)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Локална мрежа(и)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Интерфейс \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Мрежа %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Хост %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Порт %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "Настройка на CUPS принтер"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Тук може да решите дали принтерите свързани към вашата машина ще бъдат "
-"достъпни от отдалечените машини и от кой."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Вие също решавате, дали принтерите на отдалечените машини ще бъдат "
-"автоматично достъпни на тази машина."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Принтерите на тази машина с достъпни за другите компютри"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Автоматично открива наличните принтери наотдалечените машини"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Принтер поделен на хсотове/мрежи: "
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Потребителска настройка"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Няма отдалечени машини"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Допълнителни CUPS сървъри"
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Режим за печат на японски текст"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Автоматична корекция на CUPS конфигурация"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Включено"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Изключено"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Поделяне на локални принтери"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Това са машините и мрежите за които локално свързаните принтери ще бъдат "
-"достъпни:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Добавя хост/мрежа"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Редактиране на избран хост/мрежа"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Изтриване на избран хост/мрежа"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "IP адрес на хост/мрежа:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Избор на мрежа или хост за който локалният принтер ще бъде разрешен:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Въведеният хост/мрежа IP не е правилен.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Примери на правилни IP:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Този адрес/хост вече е в списъка, той не може да бъде добавен отново.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Работа с отдалечени CUPS сървъри"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Добавяне на сървър"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Настройка на избрания сървър"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Изтриване на избрания сървър"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "Липсва IP на сървър"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Въведеното IP не е вярно.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Номерът на порта трябва да е цяло число !"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Порт"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, fuzzy, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Принтер на отдалечен LPD сървър"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, fuzzy, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Липсва име на NCP сървър !"
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Четене на данни от принтера ..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Рестартиране на CUPS..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Изберете връзка към принтера"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Как е свързан принтерът ?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Отдалечените на CUPS сървър принтери не трябва да настройвате\n"
-"тук; тези принтери ще бъдат засечени автоматично."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-
-#: printer/printerdrake.pm:627
-#, fuzzy, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr "Автоматично откриване на принтер (Локален, TCP/Socket, и SMB прентери)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, fuzzy, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Отместването трябва да е положителна цяла стойност!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Проверка на вашата система..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "и един неизвестен принтер"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "и %d неизвестни принтери"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Следните принтери\n"
-"\n"
-"%s%s\n"
-"са директно свързани към вашата система"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Следния принтер\n"
-"\n"
-"%s%s\n"
-"е директно свързани към вашата система"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Следният принтер\n"
-"\n"
-"%s%s\n"
-"е директно свързан към вашата система"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Има един неизвестен принтер включен към вашата систенма"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Има %d неизвестни принтери включени към вашата систенма"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Няма намерени принтери включени директно към машината ви"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Убедете се, че принтерите са свързани и включени).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Искате ли да разрешите печат на принтерите споменати горе или на принтерите "
-"в локалната мрежа?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Искате ли да разрешите печат на принтерите в локалната мрежа?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Искатели да разрешите печат за принтерите споменати горе?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Сигурни ли сте, че искте да настроите печат за тази машина?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"ЗАБЕЛЕЖКА: В зависимост от модела принтер и печатащата система до %d MB "
-"допълнително софтуер ще бъде инсталиран."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Търси за нови принтери..."
-
-#: printer/printerdrake.pm:833
-#, fuzzy, c-format
-msgid "Found printer on %s..."
-msgstr "Изтриване на принтер \"%s\"..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr ")"
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr ""
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Избор модел на принтера"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Какъв модел принтер имате ?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr "Ако вашият принтер не е в списъка, изберете съвместим или подобен."
-
-#: printer/printerdrake.pm:875
-#, fuzzy, c-format
-msgid "Configuring printer on %s..."
-msgstr "Настройка на принтера \"%s\"..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Настройка на принтера \"%s\"..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Добави нов принтер"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Добре дошли при Магьосника за конфигуриране на Принтер\n"
-"\n"
-"Тай ще ви помогне да инсталирате вашите принтери свързани към компютъра.\n"
-"\n"
-"Ако имате принтер(и) свързани към тази машина, включете ги, така че те да "
-"могат да се конфигурират автоматично.\n"
-"\n"
-"Цъкнете на \"Следващо\" когато сте готови, и на \"Прекъсва\" ако не искате "
-"да настройвате принтерите сега."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Добре дошли в Магьосника за конфигуриране на Принтер\n"
-"\n"
-"Той ще ви помогне да инсталирате вашите принтери свързани към компютъра.\n"
-"\n"
-"Ако имате принтер(и) свързани към тази машина, включете ги, така че те да "
-"могат да се конфигурират автоматично.\n"
-"\n"
-"Цъкнете на \"Следващо\" когато сте готови, и на \"Прекъсва\" ако не искате "
-"да настройвате принтерите сега."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Добре дошли на Магьосника за конфигуриране на Принтер\n"
-"\n"
-"Тай ще ви помогне да инсталирате вашите принтери свързани към компютъра.\n"
-"\n"
-"Ако имате принтер(и) свързани към тази машина, включете ги, така че те да "
-"могат да се конфигурират автоматично.\n"
-"\n"
-"Цъкнете на \"Следващо\" когато сте готови, и на \"Прекъсва\" ако не искате "
-"да настройвате принтерите сега."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Автоматично открива принтери свързани към тази машина"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Автоматично открива принтери свързани директно към локалната мрежа"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Автоматично открива принтери свързани с машини работещи под Microsoft Windows"
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "Автоматично засичане"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, fuzzy, c-format
-msgid "Could not install the %s packages!"
-msgstr "Инсталиране на пакета %s"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Автоматично открива принтер"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Откриване на устройства ..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", мрежови принтер \"%s\", порт %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", принтер \"%s\" на SMB/Windows сървър \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "Засечен %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Пример на паралелен порт #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Мрежов принтер \"%s\", порт %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Принтер \"%s\" на SMB/Windows сървър \"%s\""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Локален принтер"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Няма намерен локален принтер! За да инсталирате ръчно принтер, въведете име "
-"на устройство/име на файл във входното поле (Паралелни портове /dev/lp0, /"
-"dev/lp1, ..., съответсващи на LPT1:, LPT2:, ..., 1-ви USB принтер: /dev/usb/"
-"lp0, 2-ри USB принтер: /dev/usb/lp1, ...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Вие трябва да въведете устройство или име на файл!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Няма намерен принтер!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Локални принтери"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Налични принтери"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Следните принтери са автоматично открити. "
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Ако той не е този който искате да конфигурирате, въведете име на устройство/"
-"име на файл във входното поле"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Алтернативно, вие може да зададете име на устройство/файл в изходния ред"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Това е списък на автоматично открити принтери."
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Конфигурацията на принтера ще работи напълно автоматично. Ако вашият принтер "
-"не е бил коректно открит или вие предпочитате на настроите принтера, "
-"включете на \"Ръчна конфигурация\"."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "За сега, няма налична алтернатива"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Моля, изберете принтер,към който ще се пращат задачите."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Моля, изберете порта на който вашият принтер е закачен или въведете име на "
-"устройство/име на файл във входното поле"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Моля, изберете порт към който свързан принтера ви."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Паралелни портове: /dev/lp0, /dev/lp1, ..., съответсващи на LPT1:, "
-"LPT2:, ..., 1-ви USB принтер: /dev/usb/lp0, 2-ри USB принтер: /dev/usb/"
-"lp1, ...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Трябва да въведете/изберете принтер/устройство!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, fuzzy, c-format
-msgid "Aborting"
-msgstr "Отказ"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Опции на отдалечен lpd-принтер"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"За да използвате отдалечен lpd принтер, трябва да предоставите имената на "
-"хоста на принтерния сървър и името на принтера на този сървър."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Име на отдалечен хост"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Име на отдалечен принтер"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Липсва име на име на хост !"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Липсва име на отдалечен принтер !"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Информация"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Открит модел: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Стартиране мрежата...."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", принтер \"%s\" на сървър \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Принтер \"%s\" на сървър \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Настройки на SMB (Windows 9x/NT) принтер"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"За да печатате на SMB принтер, трябва да дадете името\n"
-"на SMB хоста (Забележка ! То може да е различно от TCP/IP хоста !)\n"
-"и възможно IP адреса на принтерския сървър, както и общото име на\n"
-"принтера, до който искате достъп и подходящо имен, парола и информация\n"
-"за работната група."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Ако желаният принтер е открит автоматично, просто изберете го от списъка и "
-"тогава добавете име на потребител, парола, и/или работна група ако е "
-"необходимо."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "Хост на SMB сървър"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP на SMB сървър:"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Общо име"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Работна група"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Автоматично засечен"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Трябва да бъдат зададени и името и IP адреса на сървъра !"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Липсва име на SAMBA share !"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "ПРЕДУПРЕЖДЕНИЕ ЗА СИГУРНОСТ!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Свързва вашият принтер към Linux сървър и позволява Windows машини да се "
-"свързват към него като клиенти.\n"
-"\n"
-"Искате ли, да продължите настройките за този принтер както правехте до сега?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Опции за NetWare принтер"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"За да печатите на NetWare принтер ,трябва да знаете имео му и възможно\n"
-"адреса на сървъра, както и името на опашката,потребителското име,парола. "
-"(забележка! той може да е различен от TCP/IP име на хост!)"
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Сървър на принтера"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Име на печатната опашката"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "Липсва име на NCP сървър !"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "Липсва име на NCP опашка !"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", хост \"%s\", порт %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Хост \"%s\", порт %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket Опции на принтер"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Изберете един от автоматично откритите принтери в списъка горе или въведете "
-"име на хост или IP и опционално номер на порт (подразбиращ 9100) в полето."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"За да печатате на socket или TCP принтер, трябва да предоставите името на "
-"хоста на принтера и, евентуално, номер на порт. На HP JetDirect сървъри, "
-"номерът на порта обикновенно е 9100, на други сървъри може да варира. Вижте "
-"ръковоството на хардуера си."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Липсва име на хост на принтера или IP!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Име на хост за принтера или IP"
-
-#: printer/printerdrake.pm:2012
-#, fuzzy, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Опресняване на данните от принтера ..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "Печатащо устройство URI"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Трябва директно да определите URI за достъп до принтера. URI трябва да "
-"изпълни или CUPS или Foomatic спецификациите. Отбележете, че не всички "
-"типове URI се поддрържат от spooler-ите."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Трябва да бъде въведен валиден URI!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "Програмен канал към команда"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Команден ред"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "Трябва да бъде въведен команден ред!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Дали вашият принтер е многофункционално устройство от HP или Sony "
-"(OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 със скенер, "
-"DeskJet 450, Sony IJP-V100), HP PhotoSmart или HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Инсталиране на %s пакети ..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, fuzzy, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-"Не мога да създам конфигурационна директория на GNOME за всеки потребител \"%"
-"s\": %s\n"
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Проверка на устройство и конфигурация за %s..."
-
-#: printer/printerdrake.pm:2277
-#, fuzzy, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "На кой сектор искате да го преместите?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Инсталиране на SANE пакети ..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Инсталиране на mtools пакети..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Сканиране на вашето HP многофункционално устройство"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2509
-#, fuzzy, c-format
-msgid "Configuring device..."
-msgstr "Настройка ..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Прави порта на принтера наличен за CUPS..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Четене на базата данни от принтери ..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Въведете име на принтер и коментар"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Името на принтера трябва да съдържа само букви, числа и подчертавка"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Принтерът \"%s\" вече съществува,\n"
-"наистина ли искате да презапишете настройката ?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Всеки принтер се нуждае от име (например \"printer\"). Полетата Описание и "
-"Местоположе не трябва да бъдат попълвани. Има коментари за потребителите."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Име на принтер"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Описание"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Местоположение"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Подготвяне на базата данни от принтери ..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Вашият модел принтер"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Този модел е правилен"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Избор на модел ръчно"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3020
-#, fuzzy, c-format
-msgid "Install PPD file from"
-msgstr "Инсталира rpm"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, fuzzy, c-format
-msgid "Floppy Disk"
-msgstr "Флопи"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, fuzzy, c-format
-msgid "Other place"
-msgstr "Други портовете"
-
-#: printer/printerdrake.pm:3039
-#, fuzzy, c-format
-msgid "Select PPD file"
-msgstr "Изберете файл"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr ""
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr ""
-
-#: printer/printerdrake.pm:3060
-#, fuzzy, c-format
-msgid "Installing PPD file..."
-msgstr "Инсталира %s ..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Настройки на OKI Winprinter"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Настройка на Lexmark inkjet"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални "
-"принтери, без принтери на отдалечени машини или принтерни машини. Моля, "
-"свържете принтера си на локален порт или го настройте на машината, към която "
-"е свързан."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-
-#: printer/printerdrake.pm:3245
-#, fuzzy, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Настройка на Lexmark inkjet"
-
-#: printer/printerdrake.pm:3246
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални "
-"принтери, без принтери на отдалечени машини или принтерни машини. Моля, "
-"свържете принтера си на локален порт или го настройте на машината, към която "
-"е свързан."
-
-#: printer/printerdrake.pm:3268
-#, fuzzy, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Настройка за звук"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални "
-"принтери, без принтери на отдалечени машини или принтерни машини. Моля, "
-"свържете принтера си на локален порт или го настройте на машината, към която "
-"е свързан."
-
-#: printer/printerdrake.pm:3295
-#, fuzzy, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Ръчна настройка"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Настройки на принтера по подразбиране\n"
-"\n"
-"Трябва да сте сигурни, че големината на страницата\n"
-"и типа на мастилото (ако има) са настроени правилно.\n"
-"Отбележете, че при много високо качесто на изхода на\n"
-"принтера, той може значително да се забави."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Настройки по подразбиране за принтера"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Настройката %s трябва да е цяло число !"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Настройката %s трябва да е число !"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Опцията %s е извън границите !"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Искате ли да настроите този принтер (\"%s\")\n"
-"като принтер по подразбиране ?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Тестови страници"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Моля, изберете тестова страница за печат.\n"
-"Забележка: тестовата страница за снимка може да отнеме доста дълго\n"
-"време да се изпечата и на лазерни принтери с малко памет може въобще\n"
-"да не излезе. В повечето случаи е достатъчна стандартна тестова страница."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Без тестови страници"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Печат"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Стандартна тестова страница"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Алтернативна тестова страница (Писмо)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Алтернативна тестова страница (А4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Тестова страница със снимка"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Не печати никаква тестова страница"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Отпечатване на тестов(ата/ите) страниц(а/и) ..."
-
-#: printer/printerdrake.pm:3743
-#, fuzzy, c-format
-msgid "Skipping photo test page."
-msgstr "Тестова страница със снимка"
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Тестовите страници са изпратени към принтера.\n"
-"Може да отнеме малко време преди принтера да започне.\n"
-"Състояние на печата:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Тестовите страници са изпратени към принтерна.\n"
-"Може да отнеме малко време преди принтера да започне.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Проработи ли както трябва ?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Raw принтер"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"За да изпечатате файл от командния ред (терминален прозорец), можете или да "
-"използвате командата \"%s <file>\" или графичния печатащ инструмент: \"xpp "
-"<file>\" или \"kprinter <file>\". Графичните инструменти ви позволяват да "
-"избирате принтера и да поправяте лесно настройките на опциите.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Можете да използвате тази команда и в полето \"Команда за печат\" на "
-"печатните диалози в мноѓо приложения. Но тўк не поставяйте името на файла, "
-"защото то се подава от приложението.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Командата \"%s\" също така ви позволява да поправите настройките на опциите "
-"за определена работа на принтера. Просто добавете целаните настройки към "
-"командния ред, напр. \"%s <file>\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"За да видите списък на достъпните опции за текущия принтер, или прочетете "
-"списъка показан по-долу или цъкнете на бутона \"Списък с опции за печат\". %s"
-"%s%s\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Това е списък от налични за печат опции отнасящи се за текущият принтер:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"За да отпечатате файл от командния ред (терминален прозорец) използвайте "
-"командата \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Можете да използвате тази команда и в полето \"Команда за печат\" на "
-"печатните диалози в много приложения. Но тук не поставяйте името на файла, "
-"защото то се подава от приложението.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"За да видите списък с достъпните опции за текущия принтер, цъкнете на бутона "
-"\"Списък с опции за печат\"."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"За да отпечатате файл от командния ред (терминален прозорец), използвайте "
-"командата \"%s <file>\" или \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Командите \"%s\" и \"%s\" също така позволяват да поправяте избраните "
-"настройки за определена работа на принтера. Просто добавете исканите "
-"настройки към командния ред, напр. \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Печатане/Сканиране/Фото картички на принтер \"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Печатан/Сканиранее на \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Печатане/Фото картен достъп на \"%s\""
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Печатане на принтер \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Печатане на принтер \"%s\""
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Списък с принтерни опции"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, fuzzy, c-format
-msgid " - Print head alignment\n"
-msgstr "Хоризонтално подравняване:"
-
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "Конфигурация на цвят"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Пренос на настройка на принтер"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Можете да копирате настройките на принтера, които сте извършили за spoller %"
-"s на %s, текущия spooler. Цялата информация за настройките (име не принтер, "
-"описание, местоположение, вид на връзката и настройки по подразбиране) се "
-"презаписват, но работите не се прехвърлят.\n"
-"Не всички опашки могат да бъдат прехвърлени по следните причини:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS не поддържа принтери на Novell сървъри или принтери изпращащи данни във "
-"свободно-изградена команда.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ поддържа само локални принтери, отдалечени LPD принтери и Socket/TCP "
-"принтери.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD и LPRng не поддържа IPP принтери.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Като допълнение, опашките не създадени с тази програма или \"foomatic-"
-"configure\" не могат да бъдат прехвърляни."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Също така, принтери настроени с PPD файлове предоставени от производителите "
-"им или с оригинални CUPS драйвери не могат да бъдат прехвърляни."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Отбележете принтерите, които искате да прехвърлите и цъкнете\n"
-"\"Прехвърли\"."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Не прехвърляй принтери"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Прехвърли"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Принтер с име \"%s\" вече съществува в %s.\n"
-"Цъкнете \"Прехвърли\", за да го презапишете.\n"
-"Можете също така да напишете ново име или да пропуснте принтера."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Ново име на принтер"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "Прехвърляне на %s ..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Прехвърлили сте принтер по подразбиране (\"%s\"), Искате ли да го оставите "
-"по подразбиране в новата принтерна система %s ?"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Опресняване на данните от принтера ..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Стартиране мрежата ...."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "В момента настройвам мрежата"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Функционалността на мрежата не е настроена"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Продължи без настойка на мрежата"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Нямаше достъп до мрежата и такъв не можеше да бъде установен. Моля, "
-"проверете настройката и хардуера си. Тогава опитайте да настроите "
-"отдалечения принтер отново."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Рестартиране на принтерната система"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "високо"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "параноично"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Инсталиране на принтерната система в %s ниво на сигурност"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Стартиране на принтерната система при стартиране"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "Проверка на инсталирания софтуер..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Изтриване на %s ..."
-
-#: printer/printerdrake.pm:4310
-#, fuzzy, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Промяна системата за печат"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "Инсталира %s ..."
-
-#: printer/printerdrake.pm:4334
-#, fuzzy, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Промяна системата за печат"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#: printer/printerdrake.pm:4418
-#, fuzzy, c-format
-msgid "Name or IP of remote server:"
-msgstr "Принтер на отдалечен LPD сървър"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Настройка на принтер по подразбиране..."
-
-#: printer/printerdrake.pm:4458
-#, fuzzy, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Принтер на отдалечен CUPS сървър"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, fuzzy, c-format
-msgid "Local CUPS printing system"
-msgstr "Промяна системата за печат"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Изберете принтерен spooler"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Коя принтерна система (spooler) изкате да използвате ?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "ННеуспешна настройка на принтер \"%s\"!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Инсталиране на Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr ""
-
-#: printer/printerdrake.pm:4789
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Следните принтери са настроени. Цъкнете на един от тях, за да го редактирате "
-"или за да получите информация за него."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Опресняване на списъка с принтери ( за да покаже и всички отдалечени CUPS "
-"принтери)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS конфигурация"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Промяна системата за печат"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Нормален режим"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Разширени функиции"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Опции на принтера"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Поправи настройките на принтер"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Принтер %s%s\n"
-"Какво искате да поправите по този принтер ?"
-
-#: printer/printerdrake.pm:5165
-#, fuzzy, c-format
-msgid "This printer is disabled"
-msgstr "Големината на дяла не може да бъде променена"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Направи го!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Тип на връзката към принтера"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Име на принтера, описание, местоположение"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Производител на принтера, модел, драйвер"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Производител на принтера, модел"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Определи този принтер за ползване по подразбиране"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, fuzzy, c-format
-msgid "Enable Printer"
-msgstr "Включва Сървър"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, fuzzy, c-format
-msgid "Disable Printer"
-msgstr "Изключва Сървър"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Отпечатване на тестови страници"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Научете как да изпозлвате този принтер"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Премахване на принтера"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Изтриване на стар принтер \"%s\"..."
-
-#: printer/printerdrake.pm:5272
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Принтер \"%s\" на сървър \"%s\""
-
-#: printer/printerdrake.pm:5277
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Споделянето на Интернет връзката в момента е изключено."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Наистина ли искате да премахнете принтера \"%s\" ?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Изтриване на принтер \"%s\"..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Принтер по подразбиране"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Принтерът \"%s\" вече е определен за ползване по подразбиране."
-
-#: raid.pm:42
-#, fuzzy, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Не мога да прибавя дял към _форматиран_ RAID md%d"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Няма достатъчно дялове за RAID ниво %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr ""
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr ""
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Скенердрейк"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "Позволява/Забранява съобщения за IPv4 грешки."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr "Позволява/Забранява broadcasted icmp echo."
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr "Позволява/Забранява icmp echo."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Позволява/Забранява автоматично влизане."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "Позволява/Забранява престартиране от потребител на конзола."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Позволява/Забранява отдалечено влизане на root."
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Позволява/Забранява директно влизане на root."
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Предупреждения за защита:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "Разрешава/Забранява защитата от IP spoofing."
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Разрешава/Забранява ежечасова проверка на сигурността"
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr ""
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr "Разрешава/Забранява ежедневна проверка за защита"
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr ""
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Задава паролата минималната дължина на паролата, минимален брой цифри и "
-"минимален брой главни букви."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Установяване на root umask."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "ако е зададено да, проверява отворените портове"
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"ако е включено,проверява :\n"
-"\n"
-"- за празни пароли,\n"
-"\n"
-"- дали няма пароли в /etc/shadow\n"
-"- за потребители различни от root"
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "ако е включено,проверява добавянето/премахването на suid root файлове"
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"ако е задаено да, проверява файловете/директориите достъпни за писане от "
-"всеки."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "ако е задаено да, изпраща по пощата съобщение за резултата."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr ""
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "ако е задаено да, изпраща резултата от проверката на tty."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr ""
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Установяване на потребителска umask"
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Приема съобщения за IPv4 грешки."
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Приема broadcast-нато icmp echo"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr ""
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr ""
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Позволява отдалечено влизане на root."
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr ""
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "Позволява X Window връзки"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr ""
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr ""
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Chkconfig спазва msec правилата"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr ""
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr ""
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr ""
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr ""
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr ""
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "Използва парола за разпознаване на потребителите"
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr ""
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr ""
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr ""
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Без остаряване на паролата за"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Дължина на \"историята\" на паролите"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr ""
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "Root umask"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr ""
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Шел време за достъп"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "Потребителска маска"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Проверява отворените портове"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr ""
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr ""
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr ""
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Пуска ежедневна проверка за сигурност"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr ""
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr ""
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr ""
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr ""
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr ""
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Проверява файловете/директориите достъпни за писане от всеки."
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr ""
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr ""
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr "Ако е включено, праща отчет на този е-адрес,иначе праща на root."
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "изпраща съобщение за резултата по е-пощата."
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr ""
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Изпраща резултатра от проверката към syslog"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Изпраща резултата от проверката на tty."
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Добре дошли при Cracker-ите"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Лошо"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Високо"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "По-високо"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Параноично"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Това ниво се използва с внимание. Това кара системата ви по-лесна за\n"
-"употреба, но е по-чувствително: не трябва да бъде използвана на машини\n"
-"свързани с други или по Интернет. Няма достъп с пароли."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Паролата сега е включена, но използването като мрежов компютър не е "
-"препоръчително."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Това е стандартната сигурност препоръчителна за компютър, който ще бъде "
-"използван да се свързва към Интернет като клиент."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Вече има някой ограничения, и повече автоматични проверки ще се изпълняват "
-"всяка вечер."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"С това ниво на сигурност, ползването на системата като сървър става "
-"възможно.\n"
-"Сигурността сега е достатъчно голяма да се използва системата като\n"
-"сървър приемащ връзки от много клиенти. "
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Подобно на предишното ниво, но системата е напълно затворена.\n"
-"Нивото на сигурност е на максимума си."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Основни опции на DrakSec "
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Моля, изберете ниво на сигурност"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Ниво на сигурност"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Използвайте libsafe за сървъри"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Библиотека, която осигурява защита от атаки с препълване на буфер и форматни "
-"стрингове."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Администратор по сигурността (логин или Ел.поща)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Пусни ALSA (Advanced Linux Sound Architecture) звуковата система"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacrton - периодично изпълняване на команди по разписание."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd се използва за наблюдение на батерията и записвайки статуса чрез\n"
-"syslog. Може също да се използва за спиране на машината, когато батерията е "
-"изтощена."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Пуска команди по разписание във време определено от командата at и пуска\n"
-"набор от други, когато натовареността спадне достатъчно."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron е стандартна UNIX програма, която периодично пуска определени програми\n"
-"по разписание. vixie cron добавя множество преимущества над тези на простия\n"
-"UNIX cron, включително по-добра сигурност и мощни настройващи опции."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM добавя поддръжка на мишка в текстово-базираните Linux приложения като\n"
-"Midnight Commander. Също така позволява базираните на мишка конзоли\n"
-"режи-и-лепи операции, и включва поддръжка на изкачащи менюта на козолата."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake прави проби на хардуера, и евентуално настройва\n"
-"нов/променен хардуер."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache е World Wide Web (WWW) сървър. Той служи да обработва на HTML "
-"файлове\n"
-"и CGI."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (често наричан inetd) пуска различни други\n"
-"Интернет услуги. Той отговаря за пускането на много услуги от рода на\n"
-"telnet, ftp, rsh и rlogin. Изключването на inetd изключва всички услуги,\n"
-"за които отговаря."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Включи филтрирането на пакети за Linux ядра серия 2.2, за\n"
-"настрока на защитната стена, s cel защитава на машината ви от\n"
-"мрежови атаки."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Този пакет зарежда маркираната клавиатурна наредба в /etc/sysconfig/"
-"keyboard.\n"
-"Тя може да бъде избрана с инструмента kbdconfig. Трябва да оставите "
-"товавключено за повечето машини."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Автоматично регенериране на header-ите на ядрото, в /boot за\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Автоматично засичане и настройка на хардуера при стартиране."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf понякога урежда извършването на различни задачи\n"
-"при стартиране за поддръжка на системната настройка."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd е демона за печат необходим на lpr да работи нормално. Той просто е\n"
-"сървър, който определя работите за печат на принтер(а/ите)."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server се използва за изграждане на високопроизводителен\n"
-"и добре достъпен сървър."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) е Domain Name Server (DNS), който се използва да превърне\n"
-"името на хоста до IP адрес."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Монтира и демонтира всякакви Network File System (NFS), SMB (LAN\n"
-"Manager/Windows), и NCP (NetWare)."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Активира/деактивира всички мрежови интерфейси, настроени да се пускат\n"
-"при стартиране на машината."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS е популярен протокол за обмен на файлове по TCP/IP мрежи.\n"
-"Тази услуга осигурява функционалността на NFS сървъра, който се настройва\n"
-"чрез файла /etc/exports."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS е популярен протокол за обмен на файлове по TCP/IP мрежи.\n"
-"Тази услуга осигурява функционалността на заключването на NFS файловете."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Автоматично включване на numlock клавиша под конзола и\n"
-"Xorg при стартиране."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Поддръжка на OKI 4w и съвместими win-принтери."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"PCMCIA поддържката обикновенно поддържа неща като ethernet и модеми в\n"
-"laptop-и. Това няма да се стартира преди да бъде настроен, така че е\n"
-"по-добре да я имате инсталирана на машини, които не се нуждаят от нея."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper се справя с RPC връзки, които се използват от протоколи като\n"
-"NFS и NIS. portmap сървъра трябва да е пуснат на машини, които работят като\n"
-"сървър за протоколи, които се нуждаят да използват RPC механизъм."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix е Main Transport Agent (MTA), който е програма която пренася\n"
-"поща от машина на машина."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Запазва и възстановята потока на системна ентропия за по-голямо качество\n"
-"на произволно генериране на числа."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Свържи чисти драйвери с блокови устройства (като дялове\n"
-"на твърдия диск), за употребата от приложения като Oracle или DVD плеъри"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"touted демона позволява таблица за IP рутиране автоматично обновявана чрез\n"
-"RIP протокола. Докато RIP е широко използвана за малки мрежи, за по-сложни\n"
-"протоколи за рутиране са нужни за сложни мрежи. "
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat протокола позволява на мрежовите потребители да извличат\n"
-"параметрите на възможностите за всяка машина на мрежата."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers протокола позволява на мрежовите потребители да проверяват кой е\n"
-"влязъл на друга отговарящата машина."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"rwho протокола позволява на отдалечени потребители да се сдобият със списък\n"
-"на всички потребители влезли на машина с работещ rwho демон (подобен на "
-"finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Пуснкане звуковата система на машината ви"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog е програма която много демони използват да запазват съобщения в\n"
-"различни системни файлове (логове). Добре е постоянно да я имате работеща."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Зареждане драйвери за вашите USB устройства."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "Стартира X Font Server (това е задължително, за да тръгне Xorg)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Избира услугите, които трябва да се пуснат при пускане на машината"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Печатане"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Интернет"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Поделяне на файлове"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Отдалечена администрация"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Сървър Бази-данни"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "стартиране"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "спряна"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Услуиги и демони"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Няма допълнителна информация\n"
-"за тази услуга, съжелявам."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Информация"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr ""
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "При зареждане"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Старт"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Стоп"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr ""
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Добре дошли в <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-
-#: share/advertising/02.pl:13
-#, fuzzy, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Сървъри</b>"
-
-#: share/advertising/02.pl:15
-#, fuzzy, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Добре дошли в света на Отвореният Изходен код"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr ""
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr ""
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr ""
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "Контролен център на Mandriva Linux"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr ""
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr ""
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr ""
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, fuzzy, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "Избор на криптиращ ключ за еашата файлова система"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr ""
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, fuzzy, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Мандрива Клуб</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Работа в Интернет</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr ""
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, fuzzy, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "Пренос на файлове чрез FTP"
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr ""
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr ""
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr ""
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr ""
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Среди за разработка</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Editors</b>"
-msgstr "Разработка"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-
-#: share/advertising/21.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Languages</b>"
-msgstr "Разработка"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, fuzzy, c-format
-msgid "\t* Scripting languages:"
-msgstr "Диспечер на печата "
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Питон</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr ""
-
-#: share/advertising/22.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Tools</b>"
-msgstr "Разработка"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, fuzzy, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Сървъри</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr ""
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Сървъри</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-
-#: share/advertising/24.pl:19
-#, fuzzy, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "Apache World Wide Web Сървър"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Контролен център на Mandriva Linux</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr ""
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, fuzzy, c-format
-msgid "<b>Online Store</b>"
-msgstr "Контролен център на Mandriva Linux"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr ""
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Мандрива Клуб</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr ""
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Мандрива Експерт</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Офисна работна станция"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Офис програми: word-процесори (OpenOffice.org Writer, Kword), таблици "
-"(OpenOffice.org Calc, Kspread), преглед на PDF, и т.н."
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Офис програми: word-процесори (kword, abiword), таблици (kspread, gnumeric), "
-"преглед на PDF, и т.н."
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Игрална станция"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Забавни програми: аркадни игри, игри на маса, стратегии и т.н."
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Мутимедийна станция"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Програми за пускане/поправяне на звук и видео"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Интернет станция"
-
-#: share/compssUsers.pl:44
-#, fuzzy, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Набор от инструменти за четене и изпращане на поща и новини (pine, mutt, "
-"tin..) и за обикаляне из Мрежата"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Мрежов компютър (клиент)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Клиенти за различни протоколи включително SSH"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Настройка"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Инструменти за улесняване настройката на компютъра ви"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Конзолни инструменти"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Редактори, шелове, файлови инстрименти, терминали"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Библиотеки за разработка на C и C++, програми и include файлове"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Документация"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Книги и HOTWO-та за Linux и свободния софтуер"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr ""
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr ""
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, fuzzy, c-format
-msgid "Groupware"
-msgstr "Група"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Kolab Сървър"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Сървър, Firewall/Рутер"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Интернет gateway"
-
-#: share/compssUsers.pl:96
-#, fuzzy, c-format
-msgid "Mail/News"
-msgstr "/Файл/_Нов"
-
-#: share/compssUsers.pl:97
-#, fuzzy, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix пощенски сървър"
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "Сървър с директории"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "FTP сървър"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr ""
-
-#: share/compssUsers.pl:108
-#, fuzzy, c-format
-msgid "DNS/NIS"
-msgstr "FND/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Име на домейн и Мрежов Информационен Сървър"
-
-#: share/compssUsers.pl:112
-#, fuzzy, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Сървър на принтера"
-
-#: share/compssUsers.pl:113
-#, fuzzy, c-format
-msgid "NFS Server, Samba server"
-msgstr "Samba Сървър"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Сървър, Бази-данни"
-
-#: share/compssUsers.pl:117
-#, fuzzy, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "PostgreSQL или MySQL сървър за бази-данни"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Сървър, Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache и Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Е-поща"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Postfix пощенски сървър"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL или MySQL сървър за бази-данни"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Мрежов компютър, сървър"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS сървър, SMB сървър, Proxy сървър, SSH сървър"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "KDE работна станция"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"The K Desktop Environment, проста среда с колекция от придружаващи "
-"инструменти"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Gnome работна станция"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Графична среда с потребителски набор от приложения и desktop инструменти"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Други графични desktop-и"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm и т.н."
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Помощни програми"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "SSH Сървър"
-
-#: share/compssUsers.pl:186
-#, fuzzy, c-format
-msgid "Webmin"
-msgstr "Webmin Обслужване"
-
-#: share/compssUsers.pl:187
-#, fuzzy, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Конфигурация на Терминален Сървър в Mandriva Linux"
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Мониторинг на мрежата"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, fuzzy, c-format
-msgid "Mandriva Wizards"
-msgstr "Контролен център на Mandriva Linux"
-
-#: share/compssUsers.pl:197
-#, fuzzy, c-format
-msgid "Wizards to configure server"
-msgstr "ННеуспешна настройка на принтер \"%s\"!"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[клавиатура]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Използване: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, fuzzy, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Трябва да рестартирате, преди промените да влязат в сила"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Моля излезте от сесията и използвайте Ctrl-Alt-BackSpace"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr ""
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr ""
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s %s изисква име на хост,MAC адрес,IP,nbi-image, 0/1 за THIN_CLIENT, 0/1 за "
-"Локална настройка...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr ""
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, fuzzy, c-format
-msgid "Terminal Server Configuration"
-msgstr "Конфигурация на Терминален Сървър в Mandriva Linux"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Включва Сървър"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Изключва Сървър"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Стартира сървър"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Спира сървър"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr ""
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Добавя/Изтрива потребители"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Добавя/Изтрива клиенти"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Изображения"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "Първоначален помощник"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, fuzzy, c-format
-msgid "Cancel Wizard"
-msgstr "Стартиране на помощник"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, fuzzy, c-format
-msgid "Use thin clients."
-msgstr "Разрешава Thin клиенти"
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr ""
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Това ще отнеме няколко минути."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, fuzzy, c-format
-msgid "Done!"
-msgstr "Готово"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, fuzzy, c-format
-msgid "Terminal Server Overview"
-msgstr "Конфигурация на Терминален Сървър в Mandriva Linux"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Стартова дискета"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr ""
-
-#: standalone/drakTermServ:670
-#, fuzzy, c-format
-msgid "PXE Image"
-msgstr "Образ"
-
-#: standalone/drakTermServ:731
-#, fuzzy, c-format
-msgid "Default kernel version"
-msgstr "Версия на ядрото"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Построява цялото ядро -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Няма избрано ядро!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Построява единичен  NIC -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "Няма  избран NIC !"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Построява всички ядра -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Изтрива"
-
-#: standalone/drakTermServ:801
-#, fuzzy, c-format
-msgid "No image selected!"
-msgstr "Няма  избран NIC !"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Изтрива всички NBI"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Добавя потребител -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Изтрива потребител"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "тип: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr ""
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Позволява локална настройка\n"
-"на хардуера"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Thin клиент"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Разрешава Thin клиенти"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Добавя клиент -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "тип: fat"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "тип: thin"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "локална настройка: не"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "локална настройка: да"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Редактира клиент"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Забранява локалните настройки"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Изтрива клиент"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Настройка на dhcpd..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Трябва да престартирате Мениджъа на Дисплей за да имат ефект промените. \n"
-"(обслужване dm restart - от конзолара)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr ""
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Подмрежа:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Мрежова маска:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Рутери:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Маска на подмрежа:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Broadcast адрес:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Име на домейна:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "Name сървъри:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Начало на IP обхват:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "Край на IP обхват:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Записва настройка"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Конфигуриране на dhcpd сървър"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Повечето от тези стойности са извлечени\n"
-"от вашата работеща система.\n"
-"Вие може да ги промените при необходимост."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Сложете дискета:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Нямам достъп до флопи!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Флопито може да бъде извадено сега"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Няма флопи устройство!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr ""
-
-#: standalone/drakTermServ:1532
-#, fuzzy, c-format
-msgid "Error writing %s/%s"
-msgstr "Грешка при запис във файла %s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Нещо беше грешно! - Дали mkisofs  е инсталиран?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Трябва да създадете първо /etc/dhcpd.conf!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, fuzzy, c-format
-msgid "%s is not a user..\n"
-msgstr "%s не е намерен...\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr ""
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr ""
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr ""
-
-#: standalone/drakTermServ:1759
-#, fuzzy, c-format
-msgid "Deleted %s...\n"
-msgstr "Засечен %s"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "%s не е намерен...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-"/etc/hosts.allow и /etc/hosts.deny вече са конфигурирани - не са променени"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Настройката е променена - растартиране на clusternfs/dhcpd"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Грешка !"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Не мога да намеря нужна картинка `%s'."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Настройчик на автоматична иснталация"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "повтори"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "ръчно"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Настройка на автоматичните стъпки"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Моля, изберете за всяка стъпка, дали ще се преиграе като при инсталацията, "
-"или ще бъде ръчна"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Подготвям дискета с автоматична инсталация"
-
-#: standalone/drakautoinst:90
-#, fuzzy, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Сложете празна дискета в устройство %s"
-
-#: standalone/drakautoinst:91
-#, fuzzy, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Подготвям дискета с автоматична инсталация"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Добре дошли.\n"
-"\n"
-"Параметрите за автоинсталация са налични в секцията в ляво"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Поздравления !"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Дискетата е успешно създадена.\n"
-"Сега можете да преиграете инсталацията."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Автоматично Инсталира"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Добавяне на обект"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Изтрива последният обект"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"Файлове или маски,записани в .backupignore файла в първата директория от "
-"архива, няма да бъдат архивирани."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr ""
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr ""
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr ""
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      DrakBackup отчет \n"
-"\n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      DrakBackup Рапорт \n"
-"\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Общ прогрес"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-
-#: standalone/drakbackup:612
-#, fuzzy, c-format
-msgid "Cannot spawn %s."
-msgstr "Не мога да отворя %s!"
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Лоша парола на %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Не мога да намеря %s на %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr ""
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr ""
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Този носител не може да бъде изтрит !"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr ""
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Архивиране на системни файлове..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Архивни файлове на харддиска"
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Резервно копие на потребителски файлове..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Резервно копие на други файлове..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Прогрес за резервно копие на твърд диск..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Няма промени за резервно копие!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Грешка по време на изпращане на поща. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr ""
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Резервно копие на вашите системни файлове (/etc директория)"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-"Използва инкрементално/диференциално създаване на резервно копие ( не замена "
-"старите)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Използва инкрементни архиви"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr ""
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Не включва критични файлове (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Моля, изберете всички потребители,които желаете да включите в архива."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr ""
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Изтриване на оизбраните"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Потребители"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Използва мрежовата връзка за архивиране"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Мрежов метод:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Прехвърля сега"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr ""
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Име на хост: или IP"
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Запомня тази парола"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr ""
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Изберете вашето CD/DVD устройство"
-
-#: standalone/drakbackup:1742
-#, fuzzy, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Моля, изберете размера на вашето CD/DVD (Mb)"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "Мултисесиен диск"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr ""
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Изтриване на вашия RW носител (1ва сесия)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " Изтрива сега "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr ""
-
-#: standalone/drakbackup:1766
-#, fuzzy, c-format
-msgid "DVD-R media"
-msgstr "DVDR устройство"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "DVDRAM устройство"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "Не е дефинирано CD устройство!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Използва лента за резервно копие"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr ""
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Не превърта лентата след архивиране"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Изтрива лентата преди да архивира"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Изкарва лента след архивиране"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Моля веведете директорията за запазване:"
-
-#: standalone/drakbackup:1948
-#, fuzzy, c-format
-msgid "Directory to save to"
-msgstr "Моля веведете директорията за запазване:"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CDROM / DVDROM"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Твърд диск / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "Ежемесечно"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "потребителски"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "януари"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "февруари"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Март"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "април"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "май"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "юни"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "юли"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Август"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "септември"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "октомври"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Ноември"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "декември"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "неделя"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "понеделник"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Вторник"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "сряда"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Четвъртък"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "петък"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Събота"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Използва демон"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Моля изберете интервал между всяко архивиране"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Минута"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Час"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Ден"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Месец"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr ""
-
-#: standalone/drakbackup:2133
-#, fuzzy, c-format
-msgid "Please choose the media for backup."
-msgstr ""
-"Моля, изберете\n"
-"носител за резервно копие."
-
-#: standalone/drakbackup:2139
-#, fuzzy, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Моля, изберете всички потребители,които желаете да включите в архива."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-
-#: standalone/drakbackup:2188
-#, fuzzy, c-format
-msgid "Please choose the compression type"
-msgstr "моля, изберете датата за възстановяване"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Използва .backupignore файлове"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, fuzzy, c-format
-msgid "SMTP server for mail:"
-msgstr "Хост на SMB сървър"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Какво"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Къде"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Кога"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Допълнителни опции"
-
-#: standalone/drakbackup:2282
-#, fuzzy, c-format
-msgid "Backup destination not configured..."
-msgstr "Функционалността на мрежата не е настроена"
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup Конфигурация"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Моля, изберете къде ще желаете да архивирате"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr ""
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Резервно копие на потребители"
-
-#: standalone/drakbackup:2368
-#, fuzzy, c-format
-msgid " (Default is all users)"
-msgstr "Потребител по подразбиране"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Моля изберете какво искате да запазите"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Система за съхранение"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Избира потребители ръчно"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Моля, изберете данни за резервно копие..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Източник за резервно копие: \n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Системни файлове:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr ""
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " на устройство: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr ""
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tИзтриване=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Опции:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: standalone/drakbackup:2518
-#, fuzzy, c-format
-msgid "\tBackups use tar only\n"
-msgstr "Резервно копие на потребителски файлове"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\tИзползва .backupignore файлове\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, fuzzy, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "На CUPS сървър \"%s\""
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr ""
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr ""
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Списък на данни за възстановяване:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, fuzzy, c-format
-msgid "- Restore System Files.\n"
-msgstr ""
-"\n"
-"- Системни файлове:\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2545
-#, fuzzy, c-format
-msgid "- Restore User Files: \n"
-msgstr "Възстанови Потребители"
-
-#: standalone/drakbackup:2550
-#, fuzzy, c-format
-msgid "- Restore Other Files: \n"
-msgstr "Възстанови други"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Моля махнете отметката или го изтрийте следващия път."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr ""
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "         Конфигурация за възстановяване       "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "OK за възстановяване на други файлове."
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: standalone/drakbackup:2992
-#, fuzzy, c-format
-msgid "Please choose the date to restore:"
-msgstr "моля, изберете датата за възстановяване"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Възстановява от твърд диск."
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Моля веведете директорията за запазване на архивите:"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr ""
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Изберете друг носител за възстановяване от него"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Друг носител"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Система за възстановяване"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Възстанови Потребители"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Възстанови други"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "избор на път за възстановяване (вместо /)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, fuzzy, c-format
-msgid "Path To Restore To"
-msgstr "Потребителско възстановяване"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr ""
-
-#: standalone/drakbackup:3215
-#, fuzzy, c-format
-msgid "No matches found..."
-msgstr "Не е намерен образ"
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Възстановява избраните"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Възстановява избраните\n"
-"файлове"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr ""
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Възстановява от  CD"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Възстановява от лента"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Етикетът на лентата не е правилния. Лентата се казва %s."
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Възстановява през мрежа"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Име на хост"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr ""
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Изисква парола"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Изисква потребителско име"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Изисква име на машина"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr ""
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr ""
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Възстановяването пропадна..."
-
-#: standalone/drakbackup:3541
-#, fuzzy, c-format
-msgid "%s not retrieved..."
-msgstr "%s не е намерен...\n"
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Търсене на файлове за възстановяване"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr ""
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Потребителско възстановяване"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Възстановява от каталог"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Не мога да намеря архив за възстановяване...\n"
-
-#: standalone/drakbackup:3800
-#, fuzzy, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Всичко правилно ли е ?"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr ""
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr ""
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr ""
-
-#: standalone/drakbackup:3825
-#, fuzzy, c-format
-msgid "Directory To Restore From"
-msgstr "Възстановява от  CD"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Прогрес на възстановяване"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Създаване на архив"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Възстановява"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Следните пакети ще трябва да се инсталират:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Моля, изберете данни за възстановяване..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Резервно копие на системни файлове"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Резервно копие на потребителски файлове"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Резервно копие на други файлове"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr ""
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "Изпращам файлове по FTP..."
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Изпращам файлове..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Архивиране от конфигурационен файл"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Преглед на Конфигурация за резервно копие."
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Конфигурация на Магьосник"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Допълнителна конфигурация"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Преглед на настройките"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr ""
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Резервно копие сега"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr ""
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Файл"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Файл/_Излиза"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-
-#: standalone/drakboot:127
-#, fuzzy, c-format
-msgid "Do you want to configure it now?"
-msgstr "Искате ли да тествате настройките?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Инсталиране на теми"
-
-#: standalone/drakboot:138
-#, fuzzy, c-format
-msgid "Graphical boot theme selection"
-msgstr "Избор модел на принтера"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Тема"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Показва тема\n"
-"на конзола"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Създава нова тема"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Потребител по подразбиране"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Подразбиращо се работно място"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Не, не искам autologin"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Да, искам autologin с това (потребител, десктоп)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Системен режим"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Пусни X-Window системата при стартиране"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, fuzzy, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Контролен център на Mandriva Linux"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Контролен център на Mandriva Linux"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr ""
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Самостоятелни инструменти"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "ХардДрейк"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Мсек"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Отдалечен контрол"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Софтуерен мениджър"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr ""
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr ""
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Конфигурационни Магьосници"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr ""
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Търсене на пакет"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Пакет: "
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Ядро:"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Рапорт"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Не е инсталиран"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Пакета не е инсталиран"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "Дракчасовник"
-
-#: standalone/drakclock:39
-#, fuzzy, c-format
-msgid "not defined"
-msgstr "не е конфигуриран"
-
-#: standalone/drakclock:41
-#, fuzzy, c-format
-msgid "Change Time Zone"
-msgstr "Часова зона"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Времеви пояс - Дракчасовник"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - Дракчасовник"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Хардуерният ви часовник настроен  ли е по GMT?"
-
-#: standalone/drakclock:75
-#, fuzzy, c-format
-msgid "Network Time Protocol"
-msgstr "Мрежов интерфейс"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr ""
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Сървър:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Анулиране"
-
-#: standalone/drakclock:224
-#, fuzzy, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Пакет %s трябва да бъде инсталиран\n"
-"Искате да го инсталирате?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Настройка на мрежата (%d адаптера)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Интерфейс:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr ""
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Интерфейс"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Състояние"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Име на хост: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Настройка на име на хост..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "Настройка на LAN"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Настойка на локална мрежа ..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Приложи"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Настройка на връзките"
-
-#: standalone/drakconnect:225
-#, fuzzy, c-format
-msgid "Device selected"
-msgstr "Изтриване на оизбраните"
-
-#: standalone/drakconnect:307
-#, fuzzy, c-format
-msgid "IP configuration"
-msgstr "CUPS конфигурация"
-
-#: standalone/drakconnect:346
-#, fuzzy, c-format
-msgid "DNS servers"
-msgstr "DNS сървър"
-
-#: standalone/drakconnect:354
-#, fuzzy, c-format
-msgid "Search Domain"
-msgstr "NIS домейн"
-
-#: standalone/drakconnect:362
-#, fuzzy, c-format
-msgid "static"
-msgstr "Автоматичен IP адрес"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Контрол на трансфера"
-
-#: standalone/drakconnect:527
-#, fuzzy, c-format
-msgid "Line termination"
-msgstr "Интернет станция"
-
-#: standalone/drakconnect:538
-#, fuzzy, c-format
-msgid "Modem timeout"
-msgstr "Шел време за достъп"
-
-#: standalone/drakconnect:542
-#, fuzzy, c-format
-msgid "Use lock file"
-msgstr "Изберете файл"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr ""
-
-#: standalone/drakconnect:547
-#, fuzzy, c-format
-msgid "Busy wait"
-msgstr "Кувейт"
-
-#: standalone/drakconnect:552
-#, fuzzy, c-format
-msgid "Modem sound"
-msgstr "Модем"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Включване"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Изключване"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Клас носител"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Име на модул"
-
-#: standalone/drakconnect:606
-#, fuzzy, c-format
-msgid "Mac Address"
-msgstr "Broadcast адрес:"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Шина"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr ""
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"В системата не е открит ethernet мрежов адаптер. Моля, стартирайте "
-"инструмента за настройка на хардуер."
-
-#: standalone/drakconnect:715
-#, fuzzy, c-format
-msgid "Remove a network interface"
-msgstr "Изберете мрежов интерфейс"
-
-#: standalone/drakconnect:719
-#, fuzzy, c-format
-msgid "Select the network interface to remove:"
-msgstr "Изберете мрежов интерфейс"
-
-#: standalone/drakconnect:751
-#, fuzzy, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Изникна проблем при рестартирането на мрежата:\n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr ""
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr ""
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Лоша маска"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr ""
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, fuzzy, c-format
-msgid "down"
-msgstr "готово"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Свързан"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Не свързан"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Отвързване ..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Свързване ..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/drakconnect:874
-#, fuzzy, c-format
-msgid "Deactivate now"
-msgstr "деактивирай сега"
-
-#: standalone/drakconnect:874
-#, fuzzy, c-format
-msgid "Activate now"
-msgstr "активирай сега"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Нямате настроен интерфейс.\n"
-"Настройте ги преди това, като цъкнете на 'Настройка'"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "Настройка на локална мрежа"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Адаптер %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Стартиращ протокол"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Пуснат при стартиране"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, fuzzy, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Нямате Internet връзка.\n"
-"Създайте такава, като цъкнете на 'Настрой'"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, fuzzy, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Изберете мрежов интерфейс"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Настройка на Интернет връзка"
-
-#: standalone/drakconnect:1035
-#, fuzzy, c-format
-msgid "Third DNS server (optional)"
-msgstr "Първи DNS сървър (по избор)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Настройка на Интернет връзка"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Интернет достъп"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Тип на връзката: "
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Състояние:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, fuzzy, c-format
-msgid "XDM (X Display Manager)"
-msgstr "Избор на мениджър на дисплей"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Избор на мениджър на дисплей"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Промяната е направена.Желаете ли да рестартирате dm услугата?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "Създаване на стартираща дискета"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Основно"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Устройство"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Версия на ядрото"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Настройки"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Допълнителни опции"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Големина"
-
-#: standalone/drakfloppy:139
-#, fuzzy, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "mkinitrd допълнителни аргументи"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "принудително"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "без raid модули"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "ако е нужно"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "без scsi модули"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Добави модула"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Премахни модула"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Проверете имате ли дискета в устройството %s"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Няма носител в устойството или е защитена от писане %s.\n"
-"Моля поставете един."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Не мога да направя 'fork': %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Създаването на дискета приключи"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, fuzzy, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Неможе да се затвори правилно mkbootdisk: \n"
-" %s \n"
-" %s"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr ""
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr ""
-
-#: standalone/drakfont:210
-#, fuzzy, c-format
-msgid "No fonts found"
-msgstr "няма намерени шрифтове"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "готово"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr ""
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: standalone/drakfont:261
-#, fuzzy, c-format
-msgid "Could not find any font.\n"
-msgstr "Не сте избрали никакъв шрифт"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr ""
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Копира шрифтове"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Инсталиране на True Type шрифтове"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr ""
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr ""
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Рестартира XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "xfs рестартира"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr ""
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Списък шрифтове"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Относно"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Деинсталиране"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Импорт"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Изберете приложенията които ще поддържат шрифтовете:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Принтер без драйвери"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Избор на файл"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, fuzzy, c-format
-msgid "Import fonts"
-msgstr "Импортирт на шрифтове"
-
-#: standalone/drakfont:658
-#, fuzzy, c-format
-msgid "Install fonts"
-msgstr "Инсталира шрифтове"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr ""
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr ""
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr ""
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Избира всичко"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Изтрива списък"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, fuzzy, c-format
-msgid "Importing fonts"
-msgstr "Импортирт на шрифтове"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Начални тестове"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Копира шрифтове на вашата система"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "След инсталиране"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Изтрива шрифтове от вашата система"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "След деинсталиране"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Споделяне на връзката с Интернет"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr ""
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Споделянето на Интернет връзката е изключено."
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Установката на Споделянето на Интернет връзката е вече завършена.\n"
-"В момента е изключена.\n"
-"\n"
-"Какво искате да направите ?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "включи"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "пренастройка"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "остави"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Включване на сървъри ..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Споделянето на Интернет в момента е включено."
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Споделянето на връзката към Интернет е вече активирано"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Установката на Споделянето на Интернет връзката е завършена.\n"
-"В момента е включена.\n"
-"\n"
-"Какво искате да направите ?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "изключи"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Изключване на сървъри ..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Споделянето на Интернет връзката в момента е изключено."
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"На път сте да настроите компютъра си така, че да поделя Интернет връзката\n"
-"си. С тази възможност, други компютри в локалната ви мрежа ще могат да\n"
-"използват Интернет връзката на този компютър.\n"
-"\n"
-"Убедете се, че вие сте конфигурирали вашата Мрежа/Интернет достъп "
-"използвайки drakconnect преди да правите друго.\n"
-"\n"
-"Отбележете: трябва ви отделен за това мрежов адаптер, за да установите "
-"вътрешната си мрежа (LAN)."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Интерфейс %s (използващ модул %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Интерфейс %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Нямате мрежов адаптер!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Мрежов интерфейс"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"В системата ви има само един настроен мрежов адаптер:\n"
-"\n"
-"%s\n"
-"\n"
-"Смятам да установя локалната ви мрежа на този адаптер."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Изберете мрежов интерфейс"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Моля изберете кой мрежов адаптер да бъде включен към локалната ви мрежа."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Мрежовият интерфейс вече е конфигуриран"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Автоматична реконфигурация"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr ""
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Показва конфигурация на текущият интерфейс"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Конфигурация на текущият интерфейс"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Адрес на Локална мрежа"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Този) DHCP сървър IP"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "DNS сървър IP"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Вътрешно име на домейн"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr ""
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr ""
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Възможен конфликт с адресите в LAN с настройката на %s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Настройка ..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Настройващи скриптове, инсталиране на софтуер, стартиране на сървъри..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Проблеми с инсталирането на пакета %s"
-
-#: standalone/drakgw:598
-#, fuzzy, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Всичко е настроено.\n"
-"Сега можете да споделите Интернет връзката си с други компютри в локалната "
-"ви мрежа използвайки автоматична мрежова настройка (DHCP)."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr ""
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-
-#: standalone/drakhelp:36
-#, fuzzy, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Контролен център на Mandriva Linux"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Системни настройки"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Потребителски настройки"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Потребителски и системни настройки"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Редактируем"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Път"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Потребител"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Група"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Права"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Редактира текущото правило"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-
-#: standalone/drakperm:110
-#, fuzzy, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"Сегашното ниво на сигурност е %s. \n"
-"Изберете права за разглеждане/редактиране"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Горе"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Долу"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Премества избраното правило едно ниво надолу"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Добавяне на правило"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Добавя ново правило на края"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Изтрива избраното правило"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Редакция"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "преглед"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "потребител"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "Група"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "друг"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Четене"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr ""
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Запис"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "Разрешаване на \"%s\" да пише във файла"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Изпълни"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "sticky-бит"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Задава-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Използва id на собственик при изпълнение"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Задава-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Използва id на група при изпълнение"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Потребител :"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Група :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Текущ потребител"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "При проверка, собственика и групата няма да бъдат променени"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Избор на път"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Собственост"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Конфигуриране на PXE сървър"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Конфигуриране на Инсталационен Сървър"
-
-#: standalone/drakpxe:112
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"На път сте да настроите компютъра си така, че да поделя Интернет връзката\n"
-"си. С тази възможност, други компютри в локалната ви мрежа ще могат да\n"
-"използват Интернет връзката на този компютър.\n"
-"\n"
-"Отбележете: трябва ви отделен за това мрежов адаптер, за да установите "
-"вътрешната си мрежа (LAN)."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Моля, изберете кой мрежов адаптер да използвам за връзка към dhcp сървър."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Интерфейс %s (на мрежа %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr ""
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr ""
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Директория с образа на инсталацията"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Не е намерен образ"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Местоположение на auto_install.cfg файл"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Режим"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Канал"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Мрежа:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "Адрес:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Режим:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Криптиране:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr ""
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "изключено"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Връзка"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Претърсване"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Състояние"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Разкачване"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Опресни"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "включено"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr ""
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr ""
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Игнориране"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Описание на полетата:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(подразбираща стойност: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Ниво на сигурност:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Администратор по защита:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Основни настройки"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Мрежови опции"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Системни опции"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr ""
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Моля, изберете ниво на сигурност..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Моля, изчакайте, установявам опциите по защита..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Няма намерена звукова карта!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"x координати на текстовата рамка\n"
-"в брой символи"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"y координати на текстовата рамка\n"
-"в брой символи"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "ширина на текст"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "височина на рамка за текст"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"лентата за прогрес x координати\n"
-"от горният ляв ъгъл"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"лентата за прогрес y координати\n"
-"от горният ляв ъгъл"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "ширината на лентата за прогрес"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "височината на лентата за прогрес"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Показва лого на Конзола"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Име на тема"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr ""
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "Запазва тема"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr ""
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "избор на изображение"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Избор на цвят за лентата на прогрес"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, fuzzy, c-format
-msgid "Add an UPS device"
-msgstr "Добавяне на обект"
-
-#: standalone/drakups:83
-#, fuzzy, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Добре дошли в настройката на е-поща.\n"
-"\n"
-"Тук можете да укажете предопитанията си за известяващата система.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, fuzzy, c-format
-msgid "Autodetection"
-msgstr "Автоматично засичане"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Откриване в прогрес"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Поздравления"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr ""
-
-#: standalone/drakups:123
-#, fuzzy, c-format
-msgid "No new UPS devices was found"
-msgstr "Не е намерен образ"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, fuzzy, c-format
-msgid "UPS driver configuration"
-msgstr "Настройка на CUPS принтер"
-
-#: standalone/drakups:128
-#, fuzzy, c-format
-msgid "Please select your UPS model."
-msgstr "Моля, пробвайте мишката си"
-
-#: standalone/drakups:129
-#, fuzzy, c-format
-msgid "Manufacturer / Model:"
-msgstr "Производител на принтера, модел"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Име:"
-
-#: standalone/drakups:145
-#, fuzzy, c-format
-msgid "The name of your ups"
-msgstr "име на процесора"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Порт:"
-
-#: standalone/drakups:149
-#, fuzzy, c-format
-msgid "The port on which is connected your ups"
-msgstr "Моля, изберете типа на шината към която е свързана мишката ви."
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr ""
-
-#: standalone/drakups:250
-#, fuzzy, c-format
-msgid "UPS devices"
-msgstr "Услуги"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Име"
-
-#: standalone/drakups:269
-#, fuzzy, c-format
-msgid "UPS users"
-msgstr "Потребители"
-
-#: standalone/drakups:285
-#, fuzzy, c-format
-msgid "Access Control Lists"
-msgstr "достъп до мрежови инструменти"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr ""
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Правила"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Действие"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Ниво"
-
-#: standalone/drakups:299
-#, fuzzy, c-format
-msgid "ACL name"
-msgstr "LVM име ?"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, fuzzy, c-format
-msgid "DrakUPS"
-msgstr "Дворак (US)"
-
-#: standalone/drakups:339
-#, fuzzy, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Проверка на настройката"
-
-#: standalone/drakvpn:73
-#, fuzzy, c-format
-msgid "DrakVPN"
-msgstr "Дворак (US)"
-
-#: standalone/drakvpn:95
-#, fuzzy, c-format
-msgid "The VPN connection is enabled."
-msgstr "Споделянето на Интернет в момента е включено."
-
-#: standalone/drakvpn:96
-#, fuzzy, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Установката на Споделянето на Интернет връзката е завършена.\n"
-"В момента е включена.\n"
-"\n"
-"Какво искате да направите ?"
-
-#: standalone/drakvpn:105
-#, fuzzy, c-format
-msgid "Disabling VPN..."
-msgstr "Изключване на сървъри ..."
-
-#: standalone/drakvpn:114
-#, fuzzy, c-format
-msgid "The VPN connection is now disabled."
-msgstr "Споделянето на Интернет връзката в момента е изключено."
-
-#: standalone/drakvpn:121
-#, fuzzy, c-format
-msgid "VPN connection currently disabled"
-msgstr "Споделянето на Интернет връзката е изключено."
-
-#: standalone/drakvpn:122
-#, fuzzy, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Установката на Споделянето на Интернет връзката е вече завършена.\n"
-"В момента е изключена.\n"
-"\n"
-"Какво искате да направите ?"
-
-#: standalone/drakvpn:135
-#, fuzzy, c-format
-msgid "Enabling VPN..."
-msgstr "Включване на сървъри ..."
-
-#: standalone/drakvpn:141
-#, fuzzy, c-format
-msgid "The VPN connection is now enabled."
-msgstr "Споделянето на Интернет в момента е включено."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr ""
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, fuzzy, c-format
-msgid "Kernel module."
-msgstr "Премахни модула"
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#: standalone/drakvpn:292
-#, fuzzy, c-format
-msgid "Security Policies"
-msgstr "Предупреждения за защита:"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr ""
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, fuzzy, c-format
-msgid "Configuration file"
-msgstr "Настройка"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, fuzzy, c-format
-msgid "%s entries"
-msgstr ", %s сектора"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, fuzzy, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Повтори"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, fuzzy, c-format
-msgid "Commit"
-msgstr "компактен"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, fuzzy, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Настройка на LAN"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "config setup"
-msgstr "пренастройка"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "conn %default"
-msgstr "по подрабиране"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "normal conn"
-msgstr "Нормален режим"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, fuzzy, c-format
-msgid "Exists!"
-msgstr "Излез"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:405
-#, fuzzy, c-format
-msgid "interfaces"
-msgstr "Интерфейс"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr ""
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr ""
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr ""
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr ""
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr ""
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-
-#: standalone/drakvpn:451
-#, fuzzy, c-format
-msgid "PFS"
-msgstr "HFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr ""
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr ""
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr ""
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "ляво"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr ""
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr ""
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr ""
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:491
-#, fuzzy, c-format
-msgid "section name"
-msgstr "Име на връзката"
-
-#: standalone/drakvpn:492
-#, fuzzy, c-format
-msgid "authby"
-msgstr "Път"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "авто"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "дясно"
-
-#: standalone/drakvpn:500
-#, fuzzy, c-format
-msgid "rightcert"
-msgstr "По-високо"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr ""
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr ""
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, fuzzy, c-format
-msgid "Edit section"
-msgstr "Избор на път"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, fuzzy, c-format
-msgid "Section names"
-msgstr "Име на връзката"
-
-#: standalone/drakvpn:590
-#, fuzzy, c-format
-msgid "Can not edit!"
-msgstr "Не мога да отворя %s!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, fuzzy, c-format
-msgid "Remove section"
-msgstr "Изтрива списък"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "път"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "отдалечен"
-
-#: standalone/drakvpn:735
-#, fuzzy, c-format
-msgid "sainfo"
-msgstr "Информация"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#: standalone/drakvpn:746
-#, fuzzy, c-format
-msgid "path type"
-msgstr "Промяни типа"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, fuzzy, c-format
-msgid "real file"
-msgstr "Изберете файл"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr ""
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr ""
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#: standalone/drakvpn:941
-#, fuzzy, c-format
-msgid "Sainfo source protocol"
-msgstr "Европейски протокол"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr ""
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr ""
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr ""
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, fuzzy, c-format
-msgid "Lifetime number"
-msgstr "номер"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr ""
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, fuzzy, c-format
-msgid "Authentication algorithm"
-msgstr "идентификация"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1036
-#, fuzzy, c-format
-msgid "deflate"
-msgstr "по подрабиране"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Отдалечен"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, fuzzy, c-format
-msgid "Exchange mode"
-msgstr "Режим на набиране"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, fuzzy, c-format
-msgid "Generate policy"
-msgstr "Сигурност"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "Страдателен залог"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr ""
-
-#: standalone/drakvpn:1083
-#, fuzzy, c-format
-msgid "My certfile"
-msgstr "Изберете файл"
-
-#: standalone/drakvpn:1084
-#, fuzzy, c-format
-msgid "Name of the certificate"
-msgstr "Име на принтер"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr ""
-
-#: standalone/drakvpn:1086
-#, fuzzy, c-format
-msgid "Name of the private key"
-msgstr "Име на принтер"
-
-#: standalone/drakvpn:1087
-#, fuzzy, c-format
-msgid "Peers certfile"
-msgstr "Изберете файл"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr ""
-
-#: standalone/drakvpn:1089
-#, fuzzy, c-format
-msgid "Verify cert"
-msgstr "много добър"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr ""
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, fuzzy, c-format
-msgid "Peers identifier"
-msgstr "Принтер"
-
-#: standalone/drakvpn:1115
-#, fuzzy, c-format
-msgid "Proposal"
-msgstr "Протокол"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1126
-#, fuzzy, c-format
-msgid "DH group"
-msgstr "Група"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Команда"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr ""
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr ""
-
-#: standalone/drakvpn:1136
-#, fuzzy, c-format
-msgid "Upper-layer protocol"
-msgstr "Европейски протокол"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "any"
-msgstr "Ден"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Flag"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Посока"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "ipsec"
-msgstr "Мсек"
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "discard"
-msgstr "изключен"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "tunnel"
-msgstr "Канал"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "transport"
-msgstr "прехвърлени"
-
-#: standalone/drakvpn:1145
-#, fuzzy, c-format
-msgid "Source/destination"
-msgstr "Работна станция"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "по подрабиране"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "use"
-msgstr "Мишка"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "unique"
-msgstr "Мартиника"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Канада (кабел)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr ""
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Западна Европа"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Източна Европа"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Франция [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr ""
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "ТВ норма:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr ""
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr ""
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Появи се грешка при сканиране за TV канали"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr ""
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Алтернативни драйвери"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "списък на алтернативни драйвери за тази карта"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"това е физическата шина на който е закачено устроството (напр: PCI, USB, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Идентификация на шина"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "Това поле описва устройството"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Стар файл на устроство"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Ново devfs устройство"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "ново динамично устройство генерирано от ядрото devfs"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Модул"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "модулът на ГНУ/Линукс ядрото се грижи за това устройство"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "Extended partitions"
-msgstr "Създай нов дял"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "the number of extended partitions"
-msgstr "номерът на процесора"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Геометрия"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, fuzzy, c-format
-msgid "Disk controller"
-msgstr "SMBus контролери"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "клас хардуерно устройство"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Модел"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "модел на твърд диск"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "порт на мрежов принтер "
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "Primary partitions"
-msgstr "Форматиране на дялове"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "the number of the primary partitions"
-msgstr "номерът на процесора"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "името на производителя на устройството"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, fuzzy, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr ""
-"това е физическата шина на който е закачено устроството (напр: PCI, USB, ...)"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device #"
-msgstr "Услуги"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device number"
-msgstr "номер"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, fuzzy, c-format
-msgid "PCI function number"
-msgstr "Име на връзката"
-
-#: standalone/harddrake2:57
-#, fuzzy, c-format
-msgid "Vendor ID"
-msgstr "Производител"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "Device ID"
-msgstr "Устройство: "
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "името на производителя на устройството"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "Sub device ID"
-msgstr "Услуги"
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "името на производителя на устройството"
-
-#: standalone/harddrake2:61
-#, fuzzy, c-format
-msgid "Device USB ID"
-msgstr "Устройство: "
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Богомипс"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Размер на кеш"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "Размер на вторичен кеш на cpu"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "фамилия cpu (напр: 6 за i686 клас)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid ниво"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr ""
-"информационно ниво, което може да бъде получено чрез инструкцията cpuid"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Честорта (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr "Честота на процесора в Mhz"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Флагове"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Флагове на CPU съобщени от ядрото"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"предишните чипове на пентиум бяха бъгваи и забиваха при декодиране на F00F "
-"кода"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr ""
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "Поколение на процесора (напр: 8 за Pentium III, ...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Име на модел"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "името на производителя на процесора"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "име на процесора"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "Процесор ID"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "номерът на процесора"
-
-#: standalone/harddrake2:86
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Форматиране"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr ""
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "името на производителя на процесора"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Защита от запис"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Форматира флопи"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr ""
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI канал"
-
-#: standalone/harddrake2:97
-#, fuzzy, c-format
-msgid "Disk identifier"
-msgstr "Принтер"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, fuzzy, c-format
-msgid "Logical unit number"
-msgstr "Име на logical volume"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, fuzzy, c-format
-msgid "Installed size"
-msgstr "Инсталиране на системата"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, fuzzy, c-format
-msgid "Enabled Size"
-msgstr "включи"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, fuzzy, c-format
-msgid "type of the memory device"
-msgstr "името на производителя на устройството"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Скорост"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, fuzzy, c-format
-msgid "Bank connections"
-msgstr "Кабелна връзка"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, fuzzy, c-format
-msgid "Device file"
-msgstr "Стар файл на устроство"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, fuzzy, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "3 бутона с емулация на колелце"
-
-#: standalone/harddrake2:116
-#, fuzzy, c-format
-msgid "the type of the mouse"
-msgstr "Моля, пробвайте мишката си"
-
-#: standalone/harddrake2:117
-#, fuzzy, c-format
-msgid "the name of the mouse"
-msgstr "име на процесора"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Брой бутони"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "брой бутони на мишката"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "Моля, изберете типа на шината към която е свързана мишката ви."
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Идентификация"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Връзка"
-
-#: standalone/harddrake2:137
-#, fuzzy, c-format
-msgid "Performances"
-msgstr "Настройки"
-
-#: standalone/harddrake2:138
-#, fuzzy, c-format
-msgid "Bugs"
-msgstr "Шина"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Дялове"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Особености"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Опции"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Помощ"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Автоматично открива _принтери"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Автоматично открива _модеми"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Автоматично открива _jaz устройства"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Излиза"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Полета описание"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake помощ"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Информирай за бъг"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Относно..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Относно Harddrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Това е HardDrake, хардуерен конфигурационен инструмент на %s.\n"
-"<span foreground=\"royalblue3\">Версия:</span> %s\n"
-"<span foreground=\"royalblue3\">Автор:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, fuzzy, c-format
-msgid "Harddrake2"
-msgstr "ХардДрейк"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Открит хардуер"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Настройка на модул"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Изпълнява инструмент за конфигуриране"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "неизвестен"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Неизвестен"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Разни"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "втори"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "първи"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "записвачка"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Сметка:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Парола:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Име на хост:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Моля, изберете подреждане на клавиатурата."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Искате ли BackSpace да подава Delete на конзолата ?"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "ЛокаленДрейк"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Промените са запазени, но за да бъдат ефективни трябва да излезете"
-
-#: standalone/logdrake:50
-#, fuzzy, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Самостоятелни инструменти"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "логдрейк"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Показва само за избраният ден"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Файл/_Нов"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Файл/_Отвори"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Файл/_Запис"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Файл/Запис _като"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Файл/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Опции/Тест"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Помощ/_Относно..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr ""
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr ""
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr ""
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr ""
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "търси"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Инструмент за преглеждане на вашите лог файлове"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Настройки"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "съвпадение"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "но не съвпада"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Изберете файл"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Календар"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Съдържание на файла"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "Подредба на поща"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr ""
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "моля изчакайте, правя разбор на файл: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Сървър"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domain Name Resolver"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "Ftp Сървър"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix Пощенски сървър"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Samba Сървър"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Webmin Обслужване"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd обслужване"
-
-#: standalone/logdrake:395
-#, fuzzy, c-format
-msgid "Configure the mail alert system"
-msgstr "Промяна системата за печат"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Конфигурация за подредба на поща"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Добре дошли в настройката на е-поща.\n"
-"\n"
-"Тук можете да укажете предопитанията си за известяващата система.\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Какво искате да направите?"
-
-#: standalone/logdrake:414
-#, fuzzy, c-format
-msgid "Services settings"
-msgstr "установяване на обслужвания"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Вие ще получите тревога ако едно от изброените обслужвания не се изпълнява "
-"повече"
-
-#: standalone/logdrake:422
-#, fuzzy, c-format
-msgid "Load setting"
-msgstr "установяване на натоварване"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Вие ще получите тревога ако натоварването е по-високо от тази стойност"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr ""
-
-#: standalone/logdrake:429
-#, fuzzy, c-format
-msgid "Alert configuration"
-msgstr "конфигурация на тревога"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Моля, въведете долу вашият адрес на Ел. поща"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr ""
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr ""
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Запази като..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Моля, изберете тип на мишката."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Да симулирам ли трети бутон ?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Проверка на мишката"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Моля, пробвайте мишката си"
-
-#: standalone/net_applet:45
-#, fuzzy, c-format
-msgid "Network is up on interface %s"
-msgstr "Мрежов интерфейс"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, fuzzy, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Функционалността на мрежата не е настроена"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Свързва %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Разкачва %s"
-
-#: standalone/net_applet:70
-#, fuzzy, c-format
-msgid "Monitor Network"
-msgstr "Възстановява през мрежа"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Конфигуриране на мрежа"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "Интерфейс"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Профили"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr ""
-
-#: standalone/net_applet:223
-#, fuzzy, c-format
-msgid "Interactive intrusion detection"
-msgstr "NetRanger - система за откриване на смущения"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Винаги зареждай при стартиране"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, fuzzy, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "Това събитие е било променено."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, fuzzy, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Открита е настройка на Защитна Стена !"
-
-#: standalone/net_applet:301
-#, fuzzy, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Искате ли да завършите играта?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, fuzzy, c-format
-msgid "Attack details"
-msgstr "Без подробности"
-
-#: standalone/net_applet:322
-#, fuzzy, c-format
-msgid "Attack time: %s"
-msgstr "Действие:%s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Мрежов интерфейс: %s"
-
-#: standalone/net_applet:324
-#, fuzzy, c-format
-msgid "Attack type: %s"
-msgstr "тип: %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Протокол: %s"
-
-#: standalone/net_applet:326
-#, fuzzy, c-format
-msgid "Attacker IP address: %s"
-msgstr "Статичен IP адрес"
-
-#: standalone/net_applet:327
-#, fuzzy, c-format
-msgid "Attacker hostname: %s"
-msgstr "Установявам име на хост %s: "
-
-#: standalone/net_applet:328
-#, fuzzy, c-format
-msgid "Service attacked: %s"
-msgstr "_Тип услуга:"
-
-#: standalone/net_applet:329
-#, fuzzy, c-format
-msgid "Port attacked: %s"
-msgstr "Порт: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Мониторинг на мрежата"
-
-#: standalone/net_monitor:104
-#, fuzzy, c-format
-msgid "Global statistics"
-msgstr "Статистики"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Средно"
-
-#: standalone/net_monitor:108
-#, fuzzy, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr "Скорост на изпращане:"
-
-#: standalone/net_monitor:109
-#, fuzzy, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr "Скорост на получаване:"
-
-#: standalone/net_monitor:113
-#, fuzzy, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr "Време на връзката: "
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Почакайте, пробвам вашата връзка..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "Разкачвам от Интернет "
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "Свързвам към Интернет"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Разкачването от Интернет е неуспешно"
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Разкачването от Интернет е завършено"
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Връзката е установена."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Връзката пропадна.\n"
-"Проверете си конфигурацията в Контролен център на Mandriva Linux."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Конфигурация на цвят"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "изпраща: "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "получено: "
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "средно"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Локално измерване"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/net_monitor:478
-#, fuzzy, c-format
-msgid "No internet connection configured"
-msgstr "Настройка на Интернет връзка"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Четене на информация от инсталираните принтери ..."
-
-#: standalone/printerdrake:116
-#, fuzzy, c-format
-msgid "%s Printer Management Tool"
-msgstr "Работа със сметки \n"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Действия"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Добавяне на принтер"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/(По подразбиране)"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Промени"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Изтрий"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Разширени функиции"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Опресни"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Настройка на CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Търси:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Използва филтър"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr ""
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Име на принтер"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Тип на връзка"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Име на сървър"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Добавяне принтер"
-
-#: standalone/printerdrake:226
-#, fuzzy, c-format
-msgid "Add a new printer to the system"
-msgstr "Добавя потребител към системата"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Подразбиращ се избор"
-
-#: standalone/printerdrake:229
-#, fuzzy, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Определи този принтер за ползване по подразбиране"
-
-#: standalone/printerdrake:232
-#, fuzzy, c-format
-msgid "Edit selected printer"
-msgstr "Настройка на избрания сървър"
-
-#: standalone/printerdrake:235
-#, fuzzy, c-format
-msgid "Delete selected printer"
-msgstr "Изтрива избраното правило"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Опресни списъка с потребителите"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "Настройка на CUPS"
-
-#: standalone/printerdrake:241
-#, fuzzy, c-format
-msgid "Configure CUPS printing system"
-msgstr "Промяна системата за печат"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Разрешено"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Изключена"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Автори:"
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, fuzzy, c-format
-msgid "Printer Management %s"
-msgstr "Работа със сметки \n"
-
-#: standalone/scannerdrake:51
-#, fuzzy, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"Пакет %s трябва да бъде инсталиран\n"
-"Искате да го инсталирате?"
-
-#: standalone/scannerdrake:55
-#, fuzzy, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Скенердрейк"
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr ""
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Търсене на настроени скенери..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Търсене на нови скенери ..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:101
-#, fuzzy, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "%s не се подържа от тази версия на Mandriva Linux."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s намерено на %s, да конфигурирам автоматично?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s не е в базата данни на скенера, да конфигурирам ръчно?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Изберете модел на скенера"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Засечен модел:  %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Порт: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr ""
-
-#: standalone/scannerdrake:144
-#, fuzzy, c-format
-msgid "The %s is not supported under Linux."
-msgstr "%s не се подържа от тази версия на Mandriva Linux."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr ""
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr ""
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr ""
-
-#: standalone/scannerdrake:200
-#, fuzzy, c-format
-msgid "Select firmware file"
-msgstr "Изберете файл"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr ""
-
-#: standalone/scannerdrake:258
-#, fuzzy, c-format
-msgid "Select firmware file for the %s"
-msgstr "Изберете файл"
-
-#: standalone/scannerdrake:276
-#, fuzzy, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Изберете файл"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr ""
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "%s не се подържа"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Автоматично засичане на портовете"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "избира устройство"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Търсене на скенери ..."
-
-#: standalone/scannerdrake:383
-#, fuzzy, c-format
-msgid "Setting up kernel modules..."
-msgstr "Зареждам модул на ядроро за USB принтер..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, fuzzy, c-format
-msgid "Attention!"
-msgstr "Атракцион"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, fuzzy, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Вашият %s бе конфигуриран.\n"
-"Вече можете да сканирате документи,използвайки \"XSane\" от менюто "
-"Мултимедия/Графики"
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:406
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"Вашият %s бе конфигуриран.\n"
-"Вече можете да сканирате документи,използвайки \"XSane\" от менюто "
-"Мултимедия/Графики"
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Имате следните скенери\n"
-"\n"
-"%s\n"
-"на вашата система\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"Следният скенер\n"
-"\n"
-"%s\n"
-"е на разположение на системата ви.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Търсене за нови скенери"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr ""
-
-#: standalone/scannerdrake:465
-#, fuzzy, c-format
-msgid "Install/Update firmware files"
-msgstr "Изберете файл"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Споделяне на скенери"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Всички отдалечени машини"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Тази машина"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Поделяне на скенера за следните хостове:"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Споделяне на локални скенери"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Добавяне на хост"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Настройка на избрания хост"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Изтриване на избрания адрес"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Трябва да въведете име или IP адрес.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Използване на отдалечени скенери"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: standalone/scannerdrake:940
-#, fuzzy, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"Пакет %s трябва да бъде инсталиран\n"
-"Искате да го инсталирате?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr ""
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, fuzzy, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Устройство на мишката: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr ""
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Прогрес на хардуерна проба"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, fuzzy, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Искате ли да тествате настройките?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Избор на език"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Лиценз"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Настройка на мишка"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Засичане на дисковете"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Избор на клас инсталация"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Избор на клавиатура"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Разделяне на дялове"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Форматиране на дялове"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Пакети за инсталиране"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Инсталиране на системата"
-
-#: steps.pm:25
-#, fuzzy, c-format
-msgid "Administrator password"
-msgstr "Въведете парола за root"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Добавяне на потребител"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Настойка на мрежата"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Инсталиране на bootloader"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Настройка на Х"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Настройка на услугите"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Инсталиране на обновления"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Изход от инсталационната програма"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Всичко правилно ли е ?"
-
-#: ugtk2.pm:968
-#, fuzzy, c-format
-msgid "No file chosen"
-msgstr "избор на файл"
-
-#: ugtk2.pm:970
-#, fuzzy, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Трябва да изберете файл, а не директория.\n"
-
-#: ugtk2.pm:972
-#, fuzzy, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Името \"/\" може да е само папка, а не ключ"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such directory"
-msgstr "Не е директория"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such file"
-msgstr "Не съществува файл \"%s\"\n"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Разшири дървото"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Изчисти дървото"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Превключване между нормално и сортиране по групи"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s не е инсталирано\n"
-"Натиснете \"Нататък\",за да инсталирате или \"Отказ\" за изход"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Инсталацията провалена"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Вашата система е с малки ресурси. Може да имате проблеми с инсталирането\n"
-#~ "на Mandriva Linux. Ако се появи проблем опитайте с текстовата инсалация. "
-#~ "Зацелта,\n"
-#~ "натиснете 'F1', когато стартирате от CDROM и въведете 'теьт'."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Свързване с Mandriva Linux web сайт за получаване на списъка с налични "
-#~ "огледални сървъри..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Инсталация на Mandriva Linux %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "ВНИМАНИЕ: Това устройство вече е настроено да се свързва към Интернет.\n"
-#~ "Просто приемете, за да оставите устройството настроено.\n"
-#~ "Поправката на полетата по-долу ще презапише тази настройка."
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Пул с динамичен IP адрес:"
-
-#, fuzzy
-#~ msgid "hd"
-#~ msgstr "Чад"
-
-#, fuzzy
-#~ msgid "tape"
-#~ msgstr "Лента"
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Моля, въведете максималният размер\n"
-#~ " позволен за Drakbackup (в МБ)"
-
-#~ msgid "first step creation"
-#~ msgstr "първа стъпка на създаване"
-
-#~ msgid "choose image file"
-#~ msgstr "изберете изображение"
-
-#~ msgid "Browse"
-#~ msgstr "Преглед"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Настройка на картинката при зареждане"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "цветът на лентата за прогрес"
-
-#~ msgid "Preview"
-#~ msgstr "Преглед"
-
-#~ msgid "Choose color"
-#~ msgstr "Изберор на цвят"
-
-#~ msgid "Notice"
-#~ msgstr "Бележка"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Вие трябва да изберете първо графичен файл!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Генерирам преглед..."
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Няма флопи устройство"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Сложете дискета за обновяване на модули в устройство %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Югославска (латиница)"
-
-#~ msgid "No network card"
-#~ msgstr "Няма открита мрежова карта"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "Не сте избрали никакъв шрифт"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "Няма налична програма за преглед! Моля изберете една"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "Нямате инсталиран браузър, инсталирайте поне един, за да разглеждате "
-#~ "помощната система"
-
-#~ msgid "Checking device and configuring HPOJ..."
-#~ msgstr "Проверка на устройство и конфигурация за HPOJ..."
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Сложете дискета във флопито\n"
-#~ "Всички данни, намиращи се върху дискетата, ще бъдат загубени"
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "Сложете FAT форматирана дискета в устройство %s"
-
-#~ msgid "This floppy is not FAT formatted"
-#~ msgstr "Тази дискета не е форматирана на FAT"
-
-#~ msgid ""
-#~ "To use this saved packages selection, boot installation with ``linux "
-#~ "defcfg=floppy''"
-#~ msgstr ""
-#~ "За да използвате запазен избор на пакети, стартирайте инсталацията с "
-#~ "``linux defcfg=floppy''"
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Зареди/Запази на дискета"
-
-#~ msgid ""
-#~ "Please choose load or save package selection on floppy.\n"
-#~ "The format is the same as auto_install generated floppies."
-#~ msgstr ""
-#~ "Може изберете зареждане или запис на избора на пакети на флопи.\n"
-#~ "Форматът е същият като auto_install генерираните дискети."
-
-#~ msgid "Load from floppy"
-#~ msgstr "Зареди от дискета"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Запази на дискета"
-
-#~ msgid "Package selection"
-#~ msgstr "Избор на пакети"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "Зареждане от дискета"
-
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Сложете дискета съдържаща избор на пакети"
-
-#~ msgid "multi-function device on parallel port #%s"
-#~ msgstr "многофункционално устройство на на паралелен порт #%s"
-
-#~ msgid "multi-function device on a parallel port"
-#~ msgstr "многофункционално устройство на паралелен порт"
-
-#~ msgid "multi-function device on USB"
-#~ msgstr "многофункционално устройство на USB"
-
-#~ msgid "multi-function device on HP JetDirect"
-#~ msgstr "многофункционално устройство на HP JetDirect"
-
-#~ msgid "multi-function device"
-#~ msgstr "многофункционално устройство"
-
-#~ msgid "printing to %s"
-#~ msgstr "печат на %s"
-
-#~ msgid "using command %s"
-#~ msgstr "използва команда %s"
-
-#~ msgid "Installing HPOJ package..."
-#~ msgstr "Инсталиране на HPOJ пакети ..."
-
-#~ msgid "Application:"
-#~ msgstr "Приложение:"
-
-#~ msgid "Release: "
-#~ msgstr "Версия:"
-
-#, fuzzy
-#~ msgid "Summary: "
-#~ msgstr "Обобщение"
-
-#, fuzzy
-#~ msgid "Submit kernel version"
-#~ msgstr "Версия на ядрото"
-
-#, fuzzy
-#~ msgid "connecting to %s..."
-#~ msgstr "Изпълнява \"%s\" ..."
-
-#, fuzzy
-#~ msgid "Please enter a package name."
-#~ msgstr "Моля, задайте потребителско име"
-
-#, fuzzy
-#~ msgid "Please enter summary text."
-#~ msgstr "Моля, въведете вашият логин"
-
-#~ msgid "Loading printer configuration... Please wait"
-#~ msgstr "Зареждане на настройката на принтера... Моля изчакайте"
-
-#, fuzzy
-#~ msgid "The "
-#~ msgstr "Теми"
-
-#, fuzzy
-#~ msgid "%s (was %s)"
-#~ msgstr "%s (Порт %s)"
-
-#~ msgid "Root password"
-#~ msgstr "Въведете парола за root"
-
-#, fuzzy
-#~ msgid "Do you want to recover your system?"
-#~ msgstr "Искате ли да използвате aboot ?"
-
-#, fuzzy
-#~ msgid "Samba server"
-#~ msgstr "Samba Сървър"
-
-#~ msgid "Move"
-#~ msgstr "Премести"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "На кой диск искате да го преместите ?"
-
-#~ msgid "Sector"
-#~ msgstr "Сектор"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "На кой сектор искате да го преместите?"
-
-#~ msgid "Moving"
-#~ msgstr "Местене"
-
-#~ msgid "Moving partition..."
-#~ msgstr "Мествя дяла ... "
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "Грешка при отваряне на %s за запис: %s"
-
-#~ msgid ""
-#~ "This is HardDrake, a Mandriva Linux hardware configuration tool.\n"
-#~ "<span foreground=\"royalblue3\">Version:</span> %s\n"
-#~ "<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-#~ "tvignaud@mandriva.com&gt;\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Това е HardDrake, хардуерен конфигурационен инструмент на Mandriva "
-#~ "Linux.\n"
-#~ "<span foreground=\"royalblue3\">Версия:</span> %s\n"
-#~ "<span foreground=\"royalblue3\">Автор:</span> Thierry Vignaud &lt;"
-#~ "tvignaud@mandriva.com&gt;\n"
-#~ "\n"
-
-#, fuzzy
-#~ msgid "Morrocco"
-#~ msgstr "Мароко"
-
-#, fuzzy
-#~ msgid "Server Information:"
-#~ msgstr "Информация"
-
-#, fuzzy
-#~ msgid "Use SSL connection"
-#~ msgstr "ADSL връзка"
-
-#, fuzzy
-#~ msgid "User Base:"
-#~ msgstr "Потребителско име"
-
-#, fuzzy
-#~ msgid "Base:"
-#~ msgstr "Име:"
-
-#, fuzzy
-#~ msgid "Scope:"
-#~ msgstr "Стоп"
-
-#, fuzzy
-#~ msgid "Bind Server:"
-#~ msgstr "Сървър: "
-
-#~ msgid "OK"
-#~ msgstr "OK"
-
-#, fuzzy
-#~ msgid "NO"
-#~ msgstr "ИНФО"
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Чешка (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Немска"
-
-#~ msgid "Dvorak"
-#~ msgstr "Дворак"
-
-#~ msgid "Spanish"
-#~ msgstr "Испанска"
-
-#~ msgid "Finnish"
-#~ msgstr "Финландска"
-
-#~ msgid "French"
-#~ msgstr "Френска"
-
-#~ msgid "Norwegian"
-#~ msgstr "Норвежка"
-
-#~ msgid "Polish"
-#~ msgstr "Полска"
-
-#~ msgid "Russian"
-#~ msgstr "Руска"
-
-#~ msgid "Swedish"
-#~ msgstr "Шведска"
-
-#~ msgid "Albanian"
-#~ msgstr "Албанска"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Арменска (стара)"
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Арменска (пишеща машина)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Арменска (фонетичен)"
-
-#~ msgid "Arabic"
-#~ msgstr "Арабски"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Азербайджанска (латиница)"
-
-#~ msgid "Belgian"
-#~ msgstr "Белгийска"
-
-#~ msgid "Bengali"
-#~ msgstr "Бенгалска"
-
-#~ msgid "Bulgarian (phonetic)"
-#~ msgstr "Българска (фонетичен)"
-
-#~ msgid "Bulgarian (BDS)"
-#~ msgstr "Българска (BDS)"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Бразилска (ABNT-2)"
-
-#~ msgid "Bosnian"
-#~ msgstr "Босненска"
-
-#~ msgid "Belarusian"
-#~ msgstr "Беларуска"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "Швейцарска (немска наредба)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "Швейцарска (френски наредба)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Чешка (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Немска (без неработещи клавиши)"
-
-#~ msgid "Devanagari"
-#~ msgstr "Давенаджари"
-
-#~ msgid "Danish"
-#~ msgstr "Датска"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Дворак (US)"
-
-#, fuzzy
-#~ msgid "Dvorak (Esperanto)"
-#~ msgstr "Дворак (Норвежка)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Дворак (Норвежка)"
-
-#~ msgid "Dvorak (Swedish)"
-#~ msgstr "Дворак (Шведска)"
-
-#~ msgid "Estonian"
-#~ msgstr "Естонска"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Грузинска (\"Руска\" наредба)"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Грузинска (\"Латинска\" наредба)"
-
-#~ msgid "Greek"
-#~ msgstr "Гръцка"
-
-#~ msgid "Gujarati"
-#~ msgstr "Гуаджарати"
-
-#~ msgid "Gurmukhi"
-#~ msgstr "Гурмукчи"
-
-#~ msgid "Hungarian"
-#~ msgstr "Унгарска"
-
-#~ msgid "Croatian"
-#~ msgstr "Хърватска"
-
-#~ msgid "Israeli"
-#~ msgstr "Израелска"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Израелска (фонетична)"
-
-#~ msgid "Iranian"
-#~ msgstr "Иранска"
-
-#~ msgid "Icelandic"
-#~ msgstr "Исландска"
-
-#~ msgid "Italian"
-#~ msgstr "Италианска"
-
-#~ msgid "Inuktitut"
-#~ msgstr "Инуктитут"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Японска 106 клавиша"
-
-#~ msgid "Kannada"
-#~ msgstr "Канада"
-
-#~ msgid "Korean keyboard"
-#~ msgstr "Корейска клавиатура"
-
-#, fuzzy
-#~ msgid "Kyrgyz keyboard"
-#~ msgstr "UK клавиатура"
-
-#~ msgid "Latin American"
-#~ msgstr "Латиноамериканска"
-
-#~ msgid "Laotian"
-#~ msgstr "Лаоска"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Литвийска AZERTY (стара)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Литвийска AZERTY (нова)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Литвийска \"числова редица\" QWERTY"
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Литвийска \"фонетичен\" QWERTY"
-
-#~ msgid "Latvian"
-#~ msgstr "Латвийска"
-
-#~ msgid "Malayalam"
-#~ msgstr "Малайлам"
-
-#~ msgid "Macedonian"
-#~ msgstr "Македонска"
-
-#~ msgid "Myanmar (Burmese)"
-#~ msgstr "Майнмар (бирманска)"
-
-#~ msgid "Mongolian (cyrillic)"
-#~ msgstr "Монголска (кирилица)"
-
-#~ msgid "Maltese (UK)"
-#~ msgstr "Малтийска (UK)"
-
-#~ msgid "Maltese (US)"
-#~ msgstr "Малтийска (US)"
-
-#~ msgid "Dutch"
-#~ msgstr "Холандска"
-
-#~ msgid "Oriya"
-#~ msgstr "Орийска"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Полска (QWERTY наредба)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Полска (QWERTZ наредба)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Португалска"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Канадска (Квебек)"
-
-#~ msgid "Romanian (qwertz)"
-#~ msgstr "Румънска (qwertz)"
-
-#~ msgid "Romanian (qwerty)"
-#~ msgstr "Румънска (qwerty)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Руска (фонетична)"
-
-#~ msgid "Saami (norwegian)"
-#~ msgstr "Саами (норвежка)"
-
-#, fuzzy
-#~ msgid "Saami (swedish/finnish)"
-#~ msgstr "Саами (норвежка)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Словенска"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Словашка (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Словашка (QWERTY)"
-
-#~ msgid "Serbian (cyrillic)"
-#~ msgstr "Сръбска (кирилица)"
-
-#~ msgid "Syriac"
-#~ msgstr "Сирийски"
-
-#~ msgid "Syriac (phonetic)"
-#~ msgstr "Сирийски (фонетичен)"
-
-#~ msgid "Telugu"
-#~ msgstr "Телугу"
-
-#~ msgid "Tamil (ISCII-layout)"
-#~ msgstr "Тамилска (ISCII-подредба)"
-
-#~ msgid "Tamil (Typewriter-layout)"
-#~ msgstr "Тамилска (пишеща машина)"
-
-#~ msgid "Thai keyboard"
-#~ msgstr "Тайванска клавиатура"
-
-#~ msgid "Tajik keyboard"
-#~ msgstr "Таджикистанска клавиатура"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Турска (традиционен \"F\" модел)"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Турска (модерен \"Q\" модел)"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Украинска"
-
-#~ msgid "Uzbek (cyrillic)"
-#~ msgstr "Узбекистанска (кирилица)"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Виетнамска \"числова редица\" QWERTY"
-
-#~ msgid "Yugoslavian (latin)"
-#~ msgstr "Югославска (латиница)"
-
-#, fuzzy
-#~ msgid "No devices found"
-#~ msgstr "Не е намерен образ"
-
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to the UPS configuration utility.\n"
-#~ "\n"
-#~ "Here, you'll be add a new UPS to your system.\n"
-#~ msgstr ""
-#~ "Добре дошли в настройката на е-поща.\n"
-#~ "\n"
-#~ "Тук можете да укажете предопитанията си за известяващата система.\n"
-
-#~ msgid "Enable multiple profiles"
-#~ msgstr "Включва много профили"
-
-#~ msgid "Installing bootloader"
-#~ msgstr "Инсталиране на bootloader"
-
-#~ msgid ""
-#~ "You may now provide options to module %s.\n"
-#~ "Options are in format ``name=value name2=value2...''.\n"
-#~ "For instance, ``io=0x300 irq=7''"
-#~ msgstr ""
-#~ "Сега можете да подадете опциите му до модула %s.\n"
-#~ "Опциите са във формат ``име=стойност име2=стойност2 ...''.\n"
-#~ "Например: ``io=0x300 irq=7''"
-
-#~ msgid "Configuring printer..."
-#~ msgstr "Настройка на принтера ..."
-
-#~ msgid "Configuring applications..."
-#~ msgstr "Настройка на приложения..."
-
-#~ msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Добавя този принтер на Star Office/OpenOffice.org/GIMP"
-
-#~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Премахва този принтер от Star Office/OpenOffice.org/GIMP"
-
-#~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Добавяне на принтер на Star Office/OpenOffice.org/GIMP"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/"
-#~ "GIMP."
-#~ msgstr ""
-#~ "Принтерът \"%s\" е бил успешно добавен към Star Office/OpenOffice.org/"
-#~ "GIMP."
-
-#~ msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Неуспех при добавяне на принтер \"%s\" на Star Office/OpenOffice.org/GIMP."
-
-#~ msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Премахвам принтер от Star Office/OpenOffice.org/GIMP"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully removed from Star Office/OpenOffice."
-#~ "org/GIMP."
-#~ msgstr ""
-#~ "Принтерът  \"%s\" беше успешно премахнат от ffice/OpenOffice.org/GIMP."
-
-#~ msgid ""
-#~ "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Неспешно премахване на принтер \"%s\" от Star Office/OpenOffice.org/GIMP."
-
-#~ msgid "Installation of %s failed. The following error occurred:"
-#~ msgstr "Инсталацията на %s провалена. Появи се следната грешка:"
-
-#~ msgid "Set of tools to read and send mail and news and to browse the Web"
-#~ msgstr ""
-#~ "Набор от инструменти за четене и изпращане на поща и новини и за "
-#~ "сърфиране из Мрежата"
-
-#~ msgid "Use auto detection"
-#~ msgstr "Използвай автоматично засичане"
-
-#~ msgid ""
-#~ "This dialog is used to choose which services you wish to start at boot\n"
-#~ "time.\n"
-#~ "\n"
-#~ "DrakX will list all the services available on the current installation.\n"
-#~ "Review each one carefully and uncheck those which are not needed at boot\n"
-#~ "time.\n"
-#~ "\n"
-#~ "A short explanatory text will be displayed about a service when it is\n"
-#~ "selected. However, if you are not sure whether a service is useful or "
-#~ "not,\n"
-#~ "it is safer to leave the default behavior.\n"
-#~ "\n"
-#~ "!! At this stage, be very careful if you intend to use your machine as a\n"
-#~ "server: you will probably not want to start any services that you do not\n"
-#~ "need. Please remember that several services can be dangerous if they are\n"
-#~ "enabled on a server. In general, select only the services you really "
-#~ "need.\n"
-#~ "!!"
-#~ msgstr ""
-#~ "Сега можете да изберете кои услуги да се пускат при стартиране.\n"
-#~ "\n"
-#~ "Тук са представени всички услуги, достъпни с настоящата инсталация.\n"
-#~ "Прегледайте ги внимателно и изключете тези, които не ви трябват винаги "
-#~ "при стартиране.\n"
-#~ "\n"
-#~ "Можете да видите кратък обяснителен текст за услугата, като поставите "
-#~ "курора на мишката си\n"
-#~ "над името на услугата. Ако не сте сигурни, дали услугата е полезна или "
-#~ "не, по-добре\n"
-#~ "е да оставите избора по подразбиране.\n"
-#~ "\n"
-#~ "Внимавайте с тази стъпка, ако смятате да използвате машината си като "
-#~ "сървър:\n"
-#~ "сигурно не бихте искали да пускате услуги, от които не се нуждаете. "
-#~ "Моля,\n"
-#~ "запомнете, че някои услуги могат да бъдат опасни, ако са включени на "
-#~ "сървъра.\n"
-#~ "По принцип, избирайте само услугите, от които наистина се нуждаете.\n"
-#~ "!!"
-
-#~ msgid "GRUB"
-#~ msgstr "GRUB"
-
-#~ msgid "/dev/hda"
-#~ msgstr "/dev/hda"
-
-#~ msgid "/dev/hdb"
-#~ msgstr "/dev/hdb"
-
-#~ msgid "/dev/fd0"
-#~ msgstr "/dev/fd0"
-
-#~ msgid "Delay before booting the default image"
-#~ msgstr "Забавяне преди стартирането на подразбиращият се образ"
-
-#~ msgid ""
-#~ "\"%s\": if a sound card is detected on your system, it is displayed "
-#~ "here.\n"
-#~ "If you notice the sound card displayed is not the one that is actually\n"
-#~ "present on your system, you can click on the button and choose another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "\"%s\"ако намеря звукова карта,ще видите съобщение за това.\n"
-#~ "Ако забележите,че намерената звукова карта не отговаря на истината,\n"
-#~ "можете да цъкнете на бутона и да изберете друг драйвер."
-
-#~ msgid ""
-#~ "No ethernet network adapter has been detected on your system.\n"
-#~ "I cannot set up this connection type."
-#~ msgstr ""
-#~ "Не беше намерен мрежов адаптер в системата ви.\n"
-#~ "Не можете да настроите такъв вид връзка."
-
-#~ msgid ""
-#~ "Please choose which network adapter you want to use to connect to "
-#~ "Internet."
-#~ msgstr ""
-#~ "Моля, изберете кой мрежов адаптер да използвам за връзка към Интернет"
-
-#~ msgid "chunk size"
-#~ msgstr "големина на парчето"
-
-#~ msgid "Chunk size %s\n"
-#~ msgstr "Размер на парчето %s\n"
-
-#~ msgid "Can not add a partition to _formatted_ RAID md%d"
-#~ msgstr "Не мога да прибавя дял към _форматиран_ RAID md%d"
-
-#~ msgid "mkraid failed (maybe raidtools are missing?)"
-#~ msgstr "mkraid пропадна (може би raidtools липсват ?)"
-
-#~ msgid "mkraid failed"
-#~ msgstr "mkraid пропадна"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Връзката пропадна.\n"
-#~ "Проверете си конфигурацията в Контролен център на Mandriva Linux."
-
-#~ msgid "The package %s is needed. Install it?"
-#~ msgstr "Пакет %s е необходим. Да го инсталирам?"
-
-#~ msgid "ignore"
-#~ msgstr "игнориране"
-
-#~ msgid "no"
-#~ msgstr "не"
-
-#~ msgid "yes"
-#~ msgstr "да"
-
-#~ msgid "SILO Installation"
-#~ msgstr "SILO инсталация"
-
-#~ msgid "First sector of boot partition"
-#~ msgstr "Първи сектор от стартиращия се дял"
-
-#~ msgid "Bootloader installation"
-#~ msgstr "Инсталация на Bootloader"
-
-#~ msgid "SILO"
-#~ msgstr "SILO"
-
-#~ msgid "Alcatel speedtouch usb"
-#~ msgstr "Alcatel speedtouch USB"
-
-#~ msgid "Sagem (using pppoa) usb"
-#~ msgstr "Sagem (използва pppoa) usb"
-
-#~ msgid "Harddrake2 version %s"
-#~ msgstr "Harddrake2 версия %s"
-
-#~ msgid "transmitted"
-#~ msgstr "прехвърлени"
-
-#~ msgid "received"
-#~ msgstr "получени"
-
-#~ msgid ""
-#~ "You can export using NFS or SMB. Please select which you'd like to use."
-#~ msgstr ""
-#~ "Вие може да експортирате като използвате NFS или SMB. Моля, изберете "
-#~ "какво искате да използвате."
-
-#~ msgid ""
-#~ "You can export using NFS or Samba. Please select which you'd like to use."
-#~ msgstr ""
-#~ "Вие може да експортирате като използвате NFS или Samba. Моля, изберете "
-#~ "какво искате да използвате."
-
-#~ msgid "You must be root to read configuration file. \n"
-#~ msgstr "Трябва да сте root , за да прочетете файла с настройките.\n"
-
-#~ msgid "Can not open %s!"
-#~ msgstr "Не мога да отворя %s!"
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Картата ви може да има поддръжка на хардуерно 3D ускорение, но само с "
-#~ "Xfree %s.\n"
-#~ "Картата ви се поддържа от Xorg %s, който може да има по-добра поддръжка "
-#~ "на 2D."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s,\n"
-#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Картата ви може да има поддръжка на хардуерно 3D ускорение, но само с "
-#~ "Xorg %s,\n"
-#~ "ОТБЕЛЕЖЕТЕ, ЧЕ ТОВА Е ЕКСПЕРИМЕНТАЛНА ПОДДРЪЖКА И МОЖЕ ДА ЗАБИЕ КОМПЮТЪРА "
-#~ "ВИ.\n"
-#~ "Картата ви се поддържа от Xorg %s, който може да има по-добра поддръжка "
-#~ "на 2D."
-
-#~ msgid "Xpmac (installation display driver)"
-#~ msgstr "Xpmac (инсталация графичен драйвер)"
-
-#~ msgid "4 billion colors (32 bits)"
-#~ msgstr "4 милиарда цвята (32 бита)"
-
-#~ msgid "XFree86 server: %s\n"
-#~ msgstr "XFree86 сървър: %s\n"
-
-#~ msgid "Here is the full list of keyboards available"
-#~ msgstr "Ето пълен списък на достръпните клавиатури"
-
-#~ msgid "Please insert the Boot floppy used in drive %s"
-#~ msgstr "Сложете стартиращата дискета в устройство %s"
-
-#~ msgid "Provider dns 1 (optional)"
-#~ msgstr "1-ви DNS на доставчика (по желание)"
-
-#~ msgid "Provider dns 2 (optional)"
-#~ msgstr "2-ри DNS на доставчика (по желание)"
-
-#~ msgid "DHCP Client"
-#~ msgstr "DHCP клиент"
-
-#~ msgid ""
-#~ "Change\n"
-#~ "Restore Path"
-#~ msgstr ""
-#~ "Промяна\n"
-#~ "пътя на възстановяване"
-
-#~ msgid "European protocol"
-#~ msgstr "Европейски протокол"
-
-#~ msgid "Found \"%s\" interface do you want to use it ?"
-#~ msgstr "Намерен е \"%s\" интерфейс. Искате ли да го използвате?"
-
-#~ msgid "What kind is your ISDN connection?"
-#~ msgstr "Какъв е типът на ISDN връзката ?"
-
-#~ msgid "Do you want to start a new configuration ?"
-#~ msgstr "Желаете ли да започнете ново настройване?"
-
-#~ msgid ""
-#~ "I have detected an ISDN PCI card, but I do not know its type. Please "
-#~ "select a PCI card on the next screen."
-#~ msgstr ""
-#~ "Открита е ISDN PCI карта, но с непознат тип. Моля изберете някоя PCI "
-#~ "карта от следващият екран."
-
-#~ msgid "No ISDN PCI card found. Please select one on the next screen."
-#~ msgstr "Не е намерена ISDN PCI карта. Моля изберете от следващият екран."
-
-#~ msgid "DrakTermServ"
-#~ msgstr "ДракТермСърв"
-
-#~ msgid "Windows (FAT32)"
-#~ msgstr "Windows (FAT32)"
-
-#~ msgid "Scientific Workstation"
-#~ msgstr "Научна работна станция"
-
-#~ msgid "Please select media for backup..."
-#~ msgstr "Моля, изберете носител за възстановяване..."
-
-#~ msgid "Configuration of a remote printer"
-#~ msgstr "Настройка на отдалечен принтер"
-
-#~ msgid "Gnome Workstation"
-#~ msgstr "Gnome работна станция"
-
-#~ msgid "Running \"%s\" ..."
-#~ msgstr "Изпълнява \"%s\" ..."
-
-#~ msgid "utopia 25"
-#~ msgstr "utopia 25"
-
-#~ msgid "Messages"
-#~ msgstr "Съобщения"
-
-#~ msgid "Syslog"
-#~ msgstr "Системен журнал"
-
-#~ msgid "Compact"
-#~ msgstr "Компактен"
diff --git a/perl-install/share/po/bn.po b/perl-install/share/po/bn.po
deleted file mode 100644
index 716ed888b..000000000
--- a/perl-install/share/po/bn.po
+++ /dev/null
@@ -1,26570 +0,0 @@
-# Copyright (C) 2004 Free Software Foundation, Inc.
-# Omi Azad <omi@altruists.org>, 2004.
-# Khandakar Mujahidul Islam <suzan@BengaLinux.Org>, 2004.
-# Progga <progga@BengaLinux.Org>, 2004.
-# Jamil Ahmed <jamil@BengaLinux.Org>, 2004, 2005.
-# Samia <mailsamia2001@yahoo.com>, 2005.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX HEAD\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-03-19 23:18+0600\n"
-"Last-Translator: Samia <mailsamia2001@yahoo.com>\n"
-"Language-Team: Bangla <mdk-translation@bengalinux.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "আপনি কোন ইউএসবি ডিস্ক ফরম্যাট করতে চান?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-"আপনি একটি ইউএসবি যন্ত্র \"%s\" ফরম্যাট করতে যাচ্ছেন। সেটি এটাতে থাকা সব তথ্য মুছে "
-"ফেলবে।\n"
-"নিশ্চিত হোন যে চিহ্নিত যন্ত্রটিই সেই ইউএসবি যন্ত্র যা আপনি ফরম্যাট করতে চান। \n"
-"আমাদের পরামর্শ হচ্ছে এই কাজ করার সময় অন্যান্য ইউএসবি স্টোরেজ জন্য খুলে ফেলুন।"
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "ডিস্ক লেখবার উপযোগী না"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-"মনেহচ্ছে ইউএসবি ডিস্কে রাইট প্রটেকশন কার্যকর করা রয়েছে।\n"
-"অনুগ্রহ করে এটা আন-প্লাগ করে রইট প্রটেকশন অপসরন করে\n"
-"আবার ইউএসবি ডিস্ক প্লাগ-ইন করুন।"
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "আবার চেষ্টা"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "ইউএসবি ডিস্ক ছাড়াই অগ্রসর হও"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-"মনেহচ্ছে ইউএসবি ডিস্কে রাইট প্রটেকশন কার্যকর করা রয়েছে, কিন্তু এখন\n"
-"আমরা নিরাপদভাবে এটা আন-প্লাগও করতে পারছিনা।\n"
-"\n"
-"\n"
-"এই বাটনে ক্লিক করে আপনার মেশিন রিবুট করে ইউএসবি ডিস্ক\n"
-"আনপ্লাগ করুন এবং রইট প্রটেকশন অপসরন করে আবার\n"
-"ইউএসবি ডিস্ক প্লাগ-ইন করে ম্যান্ড্রিব মুভ চালু করুন।"
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "রিবুট"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"আপনার ইউএসবি ডিস্কে কোন উইন্ডোজ (FAT) পার্টিশন নেই।\n"
-"অগ্রসর হওয়ার জন্য আমাদের উইন্ডোজ (FAT) পার্টিশনের প্রয়োজন\n"
-"(যেহেতু উইন্ডোজ চালিত মেশিনসমূহ থেকে ফাইল নিতে বা ব্যবহার\n"
-"করার জন্য এটাই সবচাইতে আদর্শ উপায়)। অনুগ্রহ করে\n"
-"এই ইউএসবি ডিস্ক বদলে উইন্ডোজ (FAT) পার্টিশন সম্বলিত একটি ইউএসবি ডিস্ক\n"
-"সংযুক্ত করুন।\n"
-"\n"
-"\n"
-"আপনি ইউএসবি Key ছাড়াই অগ্রসর হতে পারেন - এখনো আপনি\n"
-"ম্যান্ড্রিব মুভকে সাধারণ লাইভ ম্যান্ড্রিব অপারেটিং সিস্টেম\n"
-"হিসেবে ব্যবহার করতে পারবেন।"
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"আমরা আপনার সিস্টেমে কোন ইউএসবি ড্রাইভ সনাক্ত করতে\n"
-"পারি নাই। আপনা যদি এখন একটু ইউএসবি ড্রাইভ প্লাগ-ইন\n"
-"করেন তাহলে এই কম্পিউটারে অথবা অন্য কোন\n"
-"কম্পিউটারে পরবর্তি বুটের জন্য ম্যান্ড্রিব মুভ আপনার\n"
-"সিস্টেমের কনফিগারেশন এবং হোম ডিরেক্টরির\n"
-"ফাইলসমূহ সেখানে সংরক্ষণ করতে পারবে।\n"
-"দ্রষ্টব্য: যদি আপনি এখন একটি ইউএসবি ড্রাইভ প্লাগ-ইন\n"
-"করেন, তাহলে কিছুক্ষণ অপেক্ষার করতে হবে\n"
-"চিহ্নিত করার জন্য।\n"
-"\n"
-"\n"
-"আপনি ইউএসবি ড্রাইভ ছাড়াই অগ্রসর হয়ে ম্যান্ড্রিব \n"
-"মুভকে সাধারন লাইভ ম্যান্ড্রিব অপরেটিং সিস্টেম\n"
-"হিসেবে ব্যবহার করতে পারেন।"
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "আপনার ডেটা সংরক্ষনের জন্য একটি ডিস্কের প্রয়োজন"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "আবারও একটি ইউএসবি ডিস্ক সনাক্ত হয়েছে"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "ইউএসবি ডিস্ক সেট করা হচ্ছে"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr ""
-"অনুগ্রহ করে অপেক্ষা করুন, ইউএসবি ডিস্কে সিস্টেম কনফিগারেশন ফাইল সেট করা হচ্ছে..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr "স্ক্রীন সেভারে ব্যবহারের জন্য ব্যবহারকারীর তথ্য, পাসওয়ার্ড প্রবেশ করান"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "স্বয়ংক্রিয় কনফিগারেশন"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "অনুগ্রহ করে অপেক্ষা করুন, ডিভাইসগুলি সনাক্ত এবং কনফিগার করা হচ্ছে..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "ত্রুটি"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"একটি ত্রুটি সম্পাদিত হয়েছে, কিন্তু আমি বুঝতে পারছিনা\n"
-"কিভাবে এটা সন্দরভাবে হ্যান্ডল করবো।\n"
-"আপনি নিজের ঝুঁকিতে অগ্রসর হতে পারেন।"
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "একটি ত্রুটি সম্পাদিত হয়েছে"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-"একটি ত্রুটি সম্পাদিত হয়েছে:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"ইউএসবি ডিস্কের থাকা নষ্ট কনফিগারেশন ফাইলের কারনে\n"
-"এরকম হতে পারে, সেরকম হলে সেগুলি অপসরণ করে\n"
-"ম্যান্ড্রিব মুভ চালালে সমস্যার সমাধান হতে পারে।\n"
-"সেরকম করার জন্য নির্ধারিত বাটনটিতে ক্লিক করুন।\n"
-"\n"
-"\n"
-"আপনি হয়তো রিবুট করে ইউএসবি ড্রাইভ রিমুভ করে\n"
-"কন্টেন্টগুলি অন্য OS-এ নিয়ে পর্যবেক্ষন করতে চান, অথবা\n"
-"কনসল #3 এবং #4-এ দেখে আন্দাজ করার চেষ্টা করতে\n"
-"পারেন কি হয়েছে।"
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "সিস্টেম কনফিগ ফাইলসমূহ অপসরণ করো"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "শুধু রিবুট করো"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "আপনি কোন সিডিরম সাপোর্ট ছাড়াই শুধু রান করতে পারেন"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "ঐ সমস্থ প্রোগ্রামকে মেরে ফেলো"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "সিডিরমের কোন সাপোর্ট নেই"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "সতর্কতার সাথে পড়ো!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"নিম্নবর্তি প্রোগ্রামগুলি চলাকালীন আপনি অন্য সিডিরম ব্যবহার করতে পারবেননা:\n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "সিডিরম অপসরণ করার জন্য মেমরীতে কপি করে নেয়া হচ্ছে"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "২৫৬ কেবি"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "৫১২ কেবি"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "১ এমবি"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "২ এমবি"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "৪ এমবি"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "৮ এমবি"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "১৬ এমবি"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "৩২ এমবি"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "৬৪ এমবি অথবা আরও বেশী"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X সার্ভার"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "একটি X সার্ভার পছন্দ করুন"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Multi-head কনফিগারেশন"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"আপনার সিস্টেম Multiple Head কনফিগারেশন সাপোর্ট করে।\n"
-"আপনা কি করতে চান?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Xorg প্যাকেজ ইনস্টল করা যাচ্ছেনা: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "আপনার গ্রাফিক কার্ডের জন্য মেমরী সাইজ নির্ধারন করুন"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Xorg কনফিগারেশন"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Xorg-এর কোন কনফিগারেশন আপনি রাখতে চান?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "সমস্থ head-গুলিকে আলাদাভাবে কনফিগার কারো"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Xinerama এক্সটেনশন ব্যবহার করো"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "শুধু \"%s\"%s কার্ড কনফিগ করো"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "3D হার্ডওয়্যারের গতি সম্পন্ন %s Xorg"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "আপনি Xorg %s-এ 3D হার্ডওয়্যারের গতির সুবিধা উপভোগ করতে পারেন।"
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "পরীক্ষামূলক 3D হার্ডওয়্যারের গতির সাথে Xorg %s"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"আপনার কার্ডটি Xfree %s-এর মাধ্যমে 3D হার্ডওয়্যারের গতি পেতে পারে,\n"
-"লক্ষ্য রাখবেন যে এটা একটি পরীক্ষামূলক সাপোর্ট এবং আপনার কম্পিউটার অচল হয়ে যেতে "
-"পারে।"
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "ব্যবস্থা"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "বাহির"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "গ্রাফিক কার্ড"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "মনিটর"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "রেজুলেশন"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "পরীক্ষা"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "অপশন"
-
-# সাম: broken কি সেন্সে ব্যবহৃত হয়েছে?
-# অসম্পূর্ণ নাকি corrupt?  
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr "আপনার Xorg কনফিগারেশন ফাইলটি অসম্পূর্ণ, এটি অগ্রাহ্য করছি। "
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"পরিবর্নগুলি রাখব?\n"
-"বর্তমান কনফিগারেশনগুলি হচ্ছে:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Head #%d -এর জন্য একটি মনিটর পছন্দ করুন"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "একটি মনিটর পছন্দ করুন"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "প্লাগ'এন প্লে"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "সাধারন"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "পরিবেশক"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "প্লাগ'এন প্লে অনুসন্ধান ব্যার্থ হয়েছে। অনুগ্রহ করে সঠিক মনিটর নির্বাচন করুন"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"দুইটি জরুরী প্যারামিটার হচ্ছে উল্লম্ব রিফ্রেশ মাত্রা, যেই মাত্রাটি হচ্ছে\n"
-"যেটাতে সম্পূর্ণ স্ক্রীন রিফ্রেশ হয়, এবং সবচেয়ে বেশি প্রয়োজনীয় হচ্ছে আনুভূমিক\n"
-"sync মাত্রা, যেটাতে স্ক্যানলাইনগুলো প্রদর্শিত হয়।\n"
-"\n"
-"এটা খুব গুরুত্বপূর্ণ যে"
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontal রিফ্রেশ রেট"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertical রিফ্রেশ রেট"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "২৫৬ রঙ (৮ বিট)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "৩২ হাজার রঙ (১৫ বিট)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "৬৫ হাজার রঙ (১৬ বিট)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "১৬ লক্ষ রঙ (২৪ বিট)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "রেজুলেশন"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "অন্যান্য"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "রঙের রেজুলেশন এবং গভীরতার পছন্দ করুন"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "%s গ্রাফিক কার্ড"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "ঠিক আছে"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "বাতিল"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "সাহায্য"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "এই কনফিগারেশনটি পরীক্ষা করো"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "আপনি কি এই কনফিগারেশন পরীক্ষা করতে চান?"
-
-# Warning-এর বাংলা "নোটিশ" লিখলাম
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"নোটিশ: এই গ্রাফিক্স কার্ডটি পরীক্ষা করতে গিয়ে আপনার কম্পিউটারটি অচল হয়ে যেতে পারে"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"একটি ত্রুটি সাধিত হয়েছে:\n"
-"%s\n"
-"কিছু মান পরিবর্তনের চেষ্টা করুন"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d সেকেন্ডের মধ্যে বের হয়ে যাবে"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "এটাই কি সঠিক সেটিং?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "কীবোর্ড লে-আউট: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "%s ধরণের মাউস\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "মাউস ডিভাইস: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "মনিটর: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "মনিটরের HorizSync: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "মনিটরের VertRefresh: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "গ্রাফিক্স কার্ড: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "গ্রাফিক্স মেমরী: %s\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "রঙের গভীরতা: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "রেজুলেশন: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg ড্রাইভার: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "শুরু থেকেই গ্রাফিকাল ইন্টারফস থাকবে"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"বুট হবার সাথে সাথে সয়ংক্রিয়ভাবে গ্রাফিকাল ইন্টারফেস চালু হবার জন্য আমি আপনার "
-"কম্পিউটার সেট করতে পারি।\n"
-"আপনি কি রিবুটের পরে Xorg চালু করতে চান?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"মনেহচ্চে আপনার গ্রাফিক কার্ডের টিভি-আউট কানেকটর আছে।\n"
-"ফ্রেম বাফার ব্যবহার করে কাজ করবার জন্য কনফিগার করা যাবে।\n"
-"\n"
-"এটার জন্য বুট করার আগে আপনার গ্রাফিক কার্ডকে টিভির সাথে সংযুক্ত করতে হবে।\n"
-"তারপরে বুটলোডারে \"TVout\" এন্ট্রি পছন্দ করতে হবে\n"
-"\n"
-"আপনার কি এই সুবিধাটি আছে?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "আপনি কি ধরণের টিভি ব্যবহার করছেন?"
-
-# সাম: 
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr "অনান্য"
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "অনুগ্রহ করে অপেক্ষা করুন"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "বুট লোডার ইনস্টল করা হচ্ছে"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-"LILO %s ড্রাইভে একটি নতুন ভলিউম আই-ডি দিতে চায়। যাই হোক, উইন্ডোজ এন-টি,\n"
-"২০০০, অথবা এক্স-পি'র বুট ডিস্কের ভলিউম আই-ডি পরিবর্তনে এগুলো একটি দুর্ভাগ্যজনক "
-"উইন্ডোজ সমস্যা।\n"
-"নতুন একটি ভলিউম আই-ডি দেয়া হবে?"
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Bootloader ইনষ্টলেশন ব্যর্থ হয়েছে। এ সমস্ত ত্রুটি ঘটেছে:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"বুট-লোডার সক্রিয় করার আপনাকে আপনার ওপেন ফার্মওয়্যার বুট-যন্ত্র পরিবর্তন\n"
-" করতে হতে পারে। যদি রিবুট করার পর কোন বুটলোডার প্রম্প্‌ট না দেখেন, তাহলে\n"
-" রিবুটের কমান্ড অপশনে যান এবং টাইপ করুন: setenv boot-device %s,\\\\:tbxi\n"
-" তারপর টাইপ করুন: shut-down\n"
-"পরবর্তীতে বুট হওয়ার সময় বুটলোডার প্রম্প্‌ট দেখতে পাওয়া উচিত।"
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"আপনি একটি পার্টিশনে বুটলোডার ইনস্টল করার সিন্ধান্ত নিয়েছেন।\n"
-"আপনাকে জানানো যাচ্ছে যে যেই হার্ড ড্রাইভ থেকে বুট করেন সেটাতে আগে থেকেই বুটলোডার "
-"আছে\n"
-"(যেমন: সিস্টেম কমান্ডার)।\n"
-"\n"
-"আপনি কোন ড্রাইভ থেকে বুট করছেন?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "ড্রাইভের প্রথম সেক্টর (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "রুট পার্টিশনের প্রথম সেক্টর"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "ফ্লপি তে"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "উপেক্ষা"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub ইনস্টলেশন"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "আপনি bootloader টি কোথায় ইনস্টল করতে চান?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "বুটের ধরণ কনফিগারেশন"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "বুটলোডারের আসল অপশনসমুহ"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "মেগাবাইটে র‌্যমের সাইজ প্রদান করুন"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "``নিয়ন্ত্রিত কমান্ড লাইন অপশন'' অপশনটি পাসওয়ার্ড ছাড়া ব্যবহার করা যাবে না"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "পাসওয়ার্ডটি মিলছে না"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "অনুগ্রহ করে আবার চেষ্ট করুন"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "ব্যবহারের জন্য বুটলোডার"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "বুট ডিভাইস"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "স্বাভাবিক ইমেজ লোড করার আগে দেরী করো"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "ACPI এনেবল করো"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "APIC-র অনুপস্থিতিতে জোর দাও"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "স্থানীয়ভাবে APIC-র অনুপস্থিতিতে জোর দাও"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "পাসওয়ার্ড"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "পাসওয়ার্ড (পুনরায়)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "কমান্ডলইন অপশনে বাঁধা দাও"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "বাঁধা দাও"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "প্রতি বুটে /tmp পরিষ্কার করো"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "যদি প্রয়োজন হয় যথাযথ RAM লাগবে (পাওয়া গেছে %d RAM)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Init বার্তা"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "বিলম্বিত ওপেন ফার্মওয়্যার"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "কার্নাল বুটের সময় অতিক্রান্ত হয়েছে"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "সিডি বুট সক্রিয় করা হবে?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "OF বুট সক্রিয় করা হবে?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "স্বাভাবিক অবস্থায় ব্যবহৃত OS?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "ইমেজ"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Root"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "যুক্ত"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "ভিডিওর ধরণ"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "নেটওয়ার্ক প্রোফাইল"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "শিরোনাম"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "স্বাভাবিক"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-র সাইজ"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "কোন ভিডিও নেই"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "খালি শিরোনাম গ্রহণযোগ্য নয়"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "আপনাকে অবশ্যই একটি কার্নালের ইমেজ নির্ধারণ করে দিতে হবে"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "আপনাকে অবশ্যই একটি রুট পার্টিশন নির্ধারণ করে দিতে হবে"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "এই শিরোনামটি আগেই ব্যবহার হয়েছে"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "আপনি কি ধরণের এন্ট্রি যোগ করতে চান?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "লিনাক্স"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "অন্যান্য OS (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "অন্যান্য OS (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "অন্যান্য OS (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"এপর্যন্ত আপনার বুটমেনুর এন্ট্রিগুলি এখানে।\n"
-"আপনি অন্যান্য এন্ট্রি তৈরী করতে পারেন অথবা আগের এন্ট্রিগুলি পরিবর্তন করতে পারেন।"
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "X প্রোগ্রামসমূহে প্রবেশাধিকার"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "RPM টুলে প্রবেশাধিকার"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "\"su\" গ্রহন করো"
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "এডমিনিষ্ট্রেশন সংক্রান্ত ফাইলে প্রবেশাধিকার"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "নেটওয়ার্ক টুলে প্রবেশাধিকার"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "compilation টুলে প্রবেশাধিকার"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s আগেই যোগ করা হয়েছে)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "পাসওয়ার্ডটা খুবই সাধারণ"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "অনুগ্রহ করে একটি উইজার নেম দিন"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "ইউজারনেমে অবশ্যই ছোটহাতের অক্ষর, নম্বর \"-\" এবং \"_\" থাকতে হবে"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "ইউজারনেমটি অনেক বড়"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "এই ইউজারনেমটি এর আগেই যোগ করা হয়েছে"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "ইউজার যোগ করো"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"একটি ইউজার প্রবেশ করান\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "হয়েছে"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "ইউজার গ্রহন করো"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "আসল নাম"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "লগ-ইন নাম"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "শেল"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "আইকন"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "সয়ংক্রিয় লগ-ইন"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"আমি আপনার কম্পিউটারকে সয়ংক্রিয়ভাবে একটি ইউজারকে লগইন করার জন্য সেট করতে পারি।"
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "এই সুবিধাটি কি আপনি ব্যবহার করতে চান?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "হ্যাঁ"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "না"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "স্বাভাবিক ব্যবহারকারীকে পছন্দ করুন:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "রান করার জন্য উইন্ডো ম্যানেজারকে পছন্দ করুন:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "ব্যবহার করার জন্য একটি ভাষা পছন্দ করুন"
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "পছন্দনীয় ভাষা"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Mandriva Linux বাভিন্ন ভাষা সমর্থন করে।\n"
-"আপনি যেই ভাষাটি ইনস্টল করতে চান তা পছন্দ করুন।\n"
-"ইনস্টল শেষে রি-স্টার্ট করার পরে সেই ভাষাগুলি উপলব্ধ হবে।"
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "স্বাভাবিকভাবে ইউনিকোড ব্যবহার করো"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "সমস্থ ভাষা"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "দেশ / স্থান"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "অনুগ্রহ করে তোমার দেশ পছন্দ করো।"
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "উপলব্ধ সমস্থ দেশের নাম এখানে রয়েছে"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "অন্যান্য দেশসমুহ"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "উন্নত"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "ইনপুট মাধ্যম:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "একটিও না"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "শেয়ারিং নেই"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "সব ব্যবহারকারীদের গ্রহণ করো"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr "আপনি কি ব্যবহারকারীদের কিছু ডিরেক্টরি শেয়ার করতে দিতে চান?\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-"NFS: ঐতিহ্যগত ইউনিক্স ফাইল শেয়ারিং সিস্টেম, যা ম্যাক এবং উইন্ডোজে স্বল্প সমর্থিত।"
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-"SMB: উইন্ডোজ, ম্যাক ও-এস এক্স এবং অনেক আধুনিক লিনাক্স সিস্টেম কর্তৃক ব্যবহৃত ফাইল "
-"শেয়ারিং সিস্টেম।"
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-"আপনি NFS বা SMB ব্যবহার করে ফাইল পাঠাতে পারেন। যেটি আপনি ব্যবহার করতে চান "
-"অনুগ্রহ করে নির্বাচন করুন।"
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "userdrake শুরু করো"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "বন্ধ"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"প্রত্যেক ব্যবহারকারী গ্রুপের \"ফাইল ভাগাভাগি\" ভাগাভাগি করতে পারেন। \n"
-"এই গ্রুপে একজণ ব্যবহারকারী যোগ করতে আপনি userdrake ব্যবহার করতে পারেন।"
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "লোকাল ফাইল"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-# সাম
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr "স্মার্ট কার্ড"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "উইন্ডোজ ডোমেইন"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr "SFU যুক্ত সক্রিয় ডিরেক্টরি"
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr "WinBind যুক্ত সক্রিয় ডিরেক্টরি"
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "লোকাল ফাইল:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-"লোকাল ফাইলে থাকা ব্যবহারকারীর সকল বিশ্বাসযোগ্যতা ও তথ্যের জন্য লোকাল ব্যবহার করুন"
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-"কিছু অথবা সব নির্ভরযোগ্যতার আপনার কম্পিউটারকে LDAP ব্যবহার করতে বলুন। LDAP আপনার "
-"অর্গানাইজেশনের বিভিন্ন ধরনের তথ্যকে আরও সুদৃড় করে"
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-"সার্বজনীন পাসওয়ার্ড ও গ্রুপ ফাইলসহ আপনি কম্পিউটারের একটি গ্রুপকে একই নেটওয়ার্ক তথ্য "
-"সার্ভিস ডোমেইনে চলার অনুমতি দেবে।"
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "উইন্ডোজ ডোমেইন:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-"উইনবাইন্ড আপনার সিস্টেমকে একটি উইন্ডোজ ডোমেইনের তথ্য ও নির্ভরযোগ্য ব্যবহারকারীদের "
-"পুনরুদ্ধারের অনুমতি দেবে।"
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr "SFU যুক্ত সচল ডিরেক্টরি:"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr "নেটওয়ার্কের নির্ভরযোগ্য সার্ভিস প্রদানের জন্য Kerberos একটি নিরাপদ সিস্টেম।"
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Winbind যুক্ত সচল ডিরেক্টরি:"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP অনুমোদন"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP বেইজ dn"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP সার্ভার"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "সাধারণ"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "এসএসএল"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr "নিরাপত্তা লে-আউট (SASL/Kerberos)"
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr "নির্ভরযোগ্য সচল ডিরেক্টরি"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "ডোমেইন"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "সার্ভার"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "LDAP ব্যবহারকারীদের ডাটাবেজ"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr "Anonymous বাইন্ড ব্যবহার করুন "
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr "LDAP ব্যবহারকারী সচল ডিরেক্টরি ব্রাউজ করার অনুমতি দিয়েছে"
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr "ব্যবহারকারীর পাসওয়ার্ড"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "এনক্রিপশন"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "NIS অনুমোদন"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS ডোমেইন"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS সার্ভার"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"এটার জন্য W2K PDC কাজ করতে, আপনার সম্ভবত admin চালু করার প্রয়োজন হবে: C:\\>net "
-"localgroup \"Pre-Windows 2000 Compatible Access\" সবাইকে /যুক্ত করতে  এবং "
-"সার্ভার রিবুট করতে হবে।\n"
-"উইন্ডোজ(TM) ডোমেইনে যুক্ত হওয়ার জন্য আপনাকে ডোমেইন অ্যাডমিনের ব্যবহারকারীনাম/"
-"পাসওয়ার্ডও দিতে হবে।\n"
-"যদি নেটওয়ার্কিং এরই মধ্যে চালু না হয়ে থাকে, তাহলে নেটওয়ার্ক সেটআপ করার পর Drakx "
-"ডোমেইনে যুক্ত হতেচেষ্টা করবে।\n"
-"যদি কোন কারণে এইসেটআপ ব্যর্থ হয় এবং ডোমেইন অনুমোদন কাজ না করে, তাহলে আপনার "
-"উইন্ডোজ(TM) ডোমেইনব্যবহার করতে 'smbpasswd -j DOMAIN -U USER%%PASSWORD' চালান, "
-"এবং সিস্টেম বুট হবার পরঅ্যাডমিন ব্যবহারকারীনাম/পাসওয়ার্ড দিন।\n"
-"'wbinfo -t' কমান্ডটি আপনার অনুমোদিত গোপনীয়তা ভাল কিনা পরীক্ষা করে দেখবে।"
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "অনুমোদিত উইন্ডোজ ডোমেইন"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "ডোমেইন অ্যাডমিনের ব্যবহারকারীনাম"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "ডোমেইন অ্যাডমিনের পাসওয়ার্ড"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr "UID/SID জমা করার জন্য Idmap ব্যবহার করুন "
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr "ডিফল্ট Idmap"
-
-# sam: authentication
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-"আ্যাডমিনিস্ট্রেটর (root) পাসওয়ার্ড এবং নেটওয়ার্ক পরিচয় প্রমাণ প্রক্রিয়ার নীতিমালা "
-"সেট করুন"
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr "আ্যাডমিনিস্ট্রেটর (root) পাসওয়ার্ড সেট করুন"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "নির্ভরযোগ্য নিয়ম"
-
-#  -PO: keep this short or else the buttons will not fit in the window
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "পাসওয়ার্ড ছাড়া"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "এই পাসওয়ার্ডটি খুবই ছোট (এটা অবশ্যই %d অক্ষরের হতে হবে)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "অনুমোদন"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "কোন NIS ডোমেইন ছাড়া ব্রডকাষ্ট ব্যবহার করা যাবেনা"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "গ্রাফিকাল মেনুর সাথে LILO"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "টেক্সট মেনুর সাথে LILO"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "/boot -এ বেশী জায়গা নেই"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "আপনি %s পার্টিশনে বুটলোডার ইনস্টল করতে পারবেননা\n"
-
-# renumber = রি-নাম্বার লিখলাম। আসলটা আমি জানিনা
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-"পার্টিশন রি-নাম্বার করার কারনে আপনার বুটলোডারের কনফিগারেশন অবশ্যই আপডেট করতে হবে"
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"বুটলোডার সঠিকভাবে ইনস্টল হতে পারবেনা। আপনাকে rescue বুট করতে হবে এবং \"%s\" "
-"পছন্দ করতে হবে"
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "বুট লোডার রি-ইনস্টল করো"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "কেবি"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "এমবি"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "জিবি"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "টিবি"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d মিনিট"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "১ মিনিট"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d সেকেন্ড"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu পাওয়া যাচ্ছে না"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper পাওয়া যাচ্ছে না"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "অষ্ট্রিয়া"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "অষ্ট্রেলিয়া"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "বেলজিয়াম"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "ব্রাজিল"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "কানাডা"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "সুইজারল্যান্ড"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "কোষ্টা রিকা"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "চেক রিপাবলিক"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "জার্মানী"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "ডেনমার্ক"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "এস্তোনিয়া"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "স্পেন"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "ফিনল্যান্ড"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "ফ্রান্স"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "গ্রীস"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "হাঙ্গেরী"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "আয়ারল্যান্ড"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "ইসরাঈল"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "ইতালী"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "জাপান"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "নেদারল্যান্ড"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "নরওয়ে"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "নিউজিল্যান্ড"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "পোল্যান্ড"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "পর্তুগাল"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "রাশিয়া"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "সুইডেন"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "স্লোভাকিয়া"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "থাইল্যান্ড"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "তাইওয়ান"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "দক্ষিন আফ্রিকা"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "যুক্তরাষ্ট্র"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV একটি প্রোটোকল যা আপনাকে স্থানীয়ভাবে একটি ওয়েব সার্ভারের ডিরেক্টরি মাউন্ট "
-"করার অনুমতি\n"
-"দেয়, এবং এটাকে একটি স্থানীয় ফাইলসিস্টেম হিসেবে মনে করুন(সরবরাহকৃত ওয়েব সার্ভারটি "
-"WebDAV সার্ভার\n"
-"হিসেবে কন্‌ফিগার করা)। যদি আপনি WebDAV মাউন্ট পয়েন্ত যুক্ত করতে চান, তবে \"নতুন\" "
-"বেছে নিন।"
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "নতুন"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "আন-মাউন্ট"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "মাউন্ট"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "মাউন্ট পয়েন্ট"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "অনুগ্রহ করে WebDAV সার্ভারের URL প্রবেশ করান"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL অবশ্যই http:// অথবা https:// দিয়ে শুরু করতে হবে"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "সার্ভার:"
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "মাউন্ট পয়েন্ট:"
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "অপশন: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "অনুগ্রহ করে প্রথমে আপনার ডাটার একটি ব্যাকআপ করে নিন"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"আপনি যদি aboot ব্যবহার করার পরিকল্পনা করে থাকেন, তাহলে ডিষ্কের শুরুতে সাবধানতার "
-"সাথে খালি\n"
-"জায়গা ছেড়ে দিন (২০৪৮ সেক্টরই যথেষ্ট)"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "সাহায্যকারী"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "কার্য পছন্দ করুন"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"আপনার একটি বড় মাইক্রসফ্ট উইন্ডোজ পার্টিশন আছে।\n"
-"সেটাকে আগে রি-সাইজ করার জন্য আমি পরামর্শ দিচ্ছি\n"
-"(সেটাকে আগে ক্লিক করুন এবং পরে \"Resize\"-এ ক্লিক করুন)"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "অনুগ্রহ করে একটি পার্টিশনে ক্লিক করুন"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "বিস্তারিত"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "কোন হার্ড ড্রাইভ পাওয়া যায়নি"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "FS জার্নালাইজ করা হয়েছে"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "সোয়াপ"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "উইন্ডোজ"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "শূণ্য"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "ফাইল সিস্টেমের ধরণ:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "পরিবর্তে ``%s'' ব্যবহার করুন"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "তৈরী করো"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "ধরণ"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "মুছে ফেলো"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "প্রথমে ``Unmount'' ব্যবহার করুন"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "অন্য একটি পার্টিশন পছন্দ করুন"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "একটি পার্টিশন পছন্দ করুন"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "বাহির"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "পূর্বাবস্থা"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "সাধারণ মোডে বদল করো"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "দক্ষ মোডে বদল করো"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "অগ্রসর হবে?"
-
-# সাম
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-"পার্টিশন %s ফরম্যাট করা প্রয়োজন।\n"
-"অন্যথা fstab এ মাউন্ট পয়েন্ট %s এর কোন এন্ট্রি লেখা হবে না।\n"
-"তবুও বের হয়ে যাব কি?"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "সংরক্ষণ ছাড়াই বের হও"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "কোন পার্টিশন টেবিল না লিখেই বের হয়ে যাব?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "আপনি /etc/fstab -এর পরিবর্তন সেভ করতে চান?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "পার্টিশন টেবিলের পরিবর্তনগুলি কার্যকর করবার জন্য আপনাকে রা-ষ্টার্ট করতে হবে"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "সব বন্ধ করো"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "সয়ংক্রিয়ভাবে সাজানো"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "আরও"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "হার্ড ড্রাইভের তথ্য"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "সমস্থ প্রাইমারী পার্টিশনসমূহ ব্যবহৃত হচ্ছে"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "আমি আর পার্টিশন যোগ করতে পারবনা"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"আরও পার্টিশন পাওয়ার জন্য, অনুগ্রহ করে একটি মুছে ফেলুন যাতে করে এক্সটেনডেড পার্টিশন "
-"তৈরী করা যায়"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "পার্টিশন টেবিল সংরক্ষিত করো"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "পার্টিশন টেবিল রিষ্টোর করো"
-
-# ;)
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "পার্টিশন টেবিলকে বাঁচাও"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "পার্টিশন টেবিলকে পুনরায় লোড করো"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "রিমুভেবল মিডিয়া সয়ংক্রিয়ভাবে মাউন্ট করা হচ্ছে"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "ফাইল সিলেক্ট করো"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"ব্যাকআপ পার্টিশন সমান সাইজের ছিলনা\n"
-"এখনো এগুবো?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "পার্টিশন টেবিল বাঁচানো হচ্ছে"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "বিস্তারিত তথ্য"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "আকার পরিবর্তন"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "ফরম্যাট"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "RAID-তে যোগ করো"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "LVM-এ যোগ করো"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "RAID থেকে মুছে ফেলো"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "LVM থেকে মুছে ফেলো"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "RAID পরিবর্তন করো"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "loopback-এর জন্য ব্যবহার করো"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "একটি নতুন পার্টিশন তৈরী করো"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "শুরুর সেক্টর:"
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "মেগাবাইটে সাইজ:"
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "ফাইলসিস্টেমের ধরণ:"
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "পছন্দ"
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "লজিকাল ভলিউমের নাম"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"আপনি কোন নতুন পার্টিশন তৈরী করতে পারবেন না\n"
-"(যেহেতু আপনি সর্বোচ্চ প্রাইমারী পার্টিশনের সীমায় পৌছে গিয়েছেন)।\n"
-"প্রথমে আপনাকে একটি প্রাইমারী পার্টিশন অপসরন করতে হবে এবং তারপরে এক্সটেনডেড "
-"পার্টিশন তৈরী করতে হবে।"
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "লুকআপ ফাইল রিমুভ করবো?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "%s পার্টিশনের ধরণ পরিবর্তনের পরে সেটার সমস্থ ডাটা হারিয়ে যাবে"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "পার্টিশনের ধরণ পরিবর্তন করো"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "আপনি কোন ফাইলসিস্টেম চান?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "ext2 থেকে ext3-তে পরিবর্তিত হচ্ছে"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "আপনি %s লুপব্যাক ফাইলকে কোথায় মাউন্ট করতে চান ?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "আপনি %s ডিভাইসকে কোথায় মাউন্ট করতে চান?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"এই পার্টিশনটি লুপব্যাকের জন্য ব্যবহৃত হওয়ার কারনে মাউন্টপয়েন্ট আনসেট করা যাবেনা।\n"
-" আগে লুপব্যাক রিমুভ করুন"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "আপনি কোথায় মাউন্ট করতে চান %s?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "আকার পরিবর্তন করা হচ্ছে"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT ফাইল সিস্টেমের সীমা (Bound) হিসেব করা হচ্ছে"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "এই পার্টিশনটি রি-সাইজ করার মত না"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "এই পার্টিশনের সমস্থ ডাটা ব্যাকআপ করা উচিত্‍‌"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "%s পার্টিশন রি-সাইজ করার পরে, এই পার্টিশনের সমস্থ ডাটা হারিয়ে যাবে"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "নতুন সাইজটি পছন্দ করুন"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "মেগাবাইটে নতুন সাইজ:"
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"পার্টিশনের পুনরাকৃতির পর ডাটার সম্পূর্ণতা নিশ্চিত করার জন্য, \n"
-"উইন্ডোজে(TM) আপনার পরবর্তী বুটে ফাইলসিস্টেম পরীক্ষা চলবে"
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "যোগ করার জন্য উপস্থিত একটি RAID পছন্দ করুন"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "নতুন"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "যোগ করার জন্য উপস্থিত একটি LVM পছন্দ করুন"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "LVM-এর নাম?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "লুপব্যাকের জন্য এই পার্টিশনটি ব্যবহার করা যাবেনা"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback ফাইলের নাম: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "একটি ফাইলের নাম দিন"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "ফাইলটি আগে থেকেই অন্য একটি লুপব্যাকে ব্যবহৃত হচ্ছে, আরেকটি পছন্দ করুন"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "ফাইল আগে থেকেই আছে, ব্যবহার করব?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "মাউন্ট অপসন"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "বিভিন্ন"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "ডিভাইস"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "লেভেল"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "কিলোবাইট এ chunk সাইজ"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "খুবই সাবধান: এই কাজটি ঝুঁকিপূর্ন।"
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "কি ধরণের পার্টিশন হবে?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "পরিবর্তনগুলি অবস্থান নেবার জন্য আপনাকে রি-ষ্টার্ট করতে হবে"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s ড্রাইভের পার্টিশন টেবিল ডিস্কে লিখতে যাচ্ছি!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "পার্টিশন %s -কে ফরমেট করার পরে এই পার্টিশনের সমস্থ ডাটা হারিয়ে যাবে"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "ফাইলগুলিক একটি নতুন পার্টিশনে সরিয়ে ফেলো"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "ফাইল লুকানো হোক"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"%s ডিরেক্টরীতে আগে থেকেই ডাটা আছে\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "ফাইলগুলিকে একটু নতুন পার্টিশনে নিয়ে যাওয়া হচ্ছে"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "%s কপি করা হচ্ছে"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "%s মুছে ফেলা হচ্ছে"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "পার্টিশন %s-কে এখন %s নামে জানা যাবে"
-
-# সাম: renumber = পুনর্বিন্যাস?
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr "পার্টিশনগুলো পুনঃসংখ্যান করা হয়েছে: "
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "ডিভাইস:"
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "Devfs নাম:"
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr "ভলিউম লেবেল:"
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS ড্রাইভ লেটার: %s (শুধুমাত্র একটি অনুমান)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "ধরণ:"
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "নাম:"
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "শুরু: সেক্টর %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "সাইজ: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s সেক্টরসমূহ"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "সিলিন্ডার %d থেকে %d পর্যন্ত\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "ফরমেট করা হয়েছে\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "ফরমেট করা হয়নি\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "মাউন্ট করা হয়েছে\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"লুপব্যাক ফাইল(গুলি):\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"পার্টিশন সাধারণভাবে বুট হয়েছে\n"
-"     (MS-DOS বুটের জনে, lilo-র জন্য নয়)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "লেভেল %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "চাঙ্ক সাইজ %d কিলোবাইট\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-ডিস্কসমূহ %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "লুপব্যাক ফাইলের নাম: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"কারণগুলো হতে পারে, এটি একটি\n"
-"ড্রাইভার পার্টিশন। আপনার উচিত হবে\n"
-"এটাকে এটা ছেড়ে দেয়া।\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"এই বিশেষ বুটস্ট্র্যাপ\n"
-"পার্টিশন হচ্ছে আপনার\n"
-"সিস্টেমের ডুয়াল-বুটিং এর জন্য।\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "শুধুমাত্র পড়া যাবে"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "সাইজ: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "জ্যামিতি: %s-গুলি সিলিন্ডার, %s-গুলি হেড, %s-গুলি সেক্টর\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "তথ্য:"
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-ডিস্কসমূহ %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "পার্টিশন টেবিলের ধরণ: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "%d চ্যানেলে %d আইডিতে\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "ফাইল সিস্টেমের এনক্রিপশন কী"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "আপনার ফাইল সিস্টেমের এনক্রিপশন কী পছন্দ করুন"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "এই এনক্রিপশন কী টি খুবই সাধারণ (অবশ্যই %d অক্ষর বড় হতে হবে)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "এনক্রিপশন কীগুলি মিলছেনা"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "এনক্রিপশন কী"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "এনক্রিপশন কী (পুনরায়)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Encryption অ্যালগোরিদম"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "ধরণ বদল করো"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "ইউজারনেম %s ব্যবহার করে লগইন করা গেলোনা (নষ্ট পাসওয়ার্ড?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "ডোমেইন অনুমোদন প্রয়োজন"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "কোন্‌ ব্যবহারকারীনাম"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "অন্য একটি"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"হোস্টকে ব্যবহার করার জন্য আপনার ব্যবহারকারীনাম, পাসওয়ার্ড এবং ডোমেইনের নাম প্রবেশ "
-"করান।"
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "ব্যবহারকারীনাম"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "সার্ভার খোজো"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "নতুন সার্ভারের খোজ করো"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "%s প্যাকেজগুলি ইনস্টল করা প্রয়োজন। আপনি কি ইনস্টল করতে চান?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "%s আবশ্যিক প্যাকেজ নেই"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "প্যাকেজসমূহ ইনস্টল করা হচ্ছে..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "প্যাকেজসমূহ অপসরণ করা হচ্ছে..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "%s পার্টিশন মাউন্ট করা হচ্ছে"
-
-# এখানে কি করতে হবে? দুটোই %s কিন্তু মানেটা হবে : %s ডিরেক্টরিতে %s পার্টিশন মাউন্ট করা সম্ভব হলোনা।
-# দেখবেন কি করা যাবে...
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "%2$s ডিরেক্টরিতে %1$s পার্টিশন মাউন্ট করা ব্যর্থ হয়েছে"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "%s পরীক্ষা করা হচ্ছে"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s আনমাউন্টে সমস্যা: %s"
-
-# এনেবল লিখলাম। মানেটা মাথায় আসছেনা
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "%s সোয়াপ পার্টিশন সক্রিয় করো"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "%s পার্টিশন ফরম্যাট করা হচ্ছে"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s ফাইল তৈরী এবং ফরম্যাট করা হচ্ছে"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "আমার জানা নেই পার্টিশন %s-কে কিভাবে %s ধরণে ফরম্যাট করতে হয়"
-
-# এটাও উল্টে যাবে মানে করতে গেলে। কারন মানেটা দাঁড়াবে <দ্বিতীয় %s কে প্রথম %s ফরম্যাট করা ব্যার্থ হয়েছে>
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s কে %s ফরম্যাট করতে ব্যর্থ হয়েছে"
-
-# #msgstr "%2$s কে %1$s ফরম্যাট করা ব্যর্থ হয়েছে"
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"এই ফাইল সিস্টেমে inode প্রবেশ সময় আপডেট করবেন না\n"
-"(যেমন,নিউজ সার্ভার দ্রুত করতে নিউজ স্পুলে দ্রুত প্রবেশ)।"
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"শুধুমাত্র স্পষ্টভাবে মাউন্ট করতে পারে (যেমন,\n"
-")(-a অপশন ফাইল সিস্টেম মাউন্ট করতে দেবে না)।"
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr "কোন চিহ্ন বা বিশেষ ব্লক যন্ত্রকে ফাইল সিস্টেমে ব্যাখ্যা করবেন না।"
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"মাউন্টকৃত ফাইল সিস্টেমে কোন বাইনারি এক্সিকিউট করার অনুমতি দেবেন না।\n"
-"এই অপশন সেই সার্ভারের জন্য ব্যবহৃত হতে পারে যেখানে সে তার নিজের চেয়ে\n"
-"অন্যান্য আর্কিটেকচারের বাইনারিগুলো বেশি ধারণ করে।"
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"allow set-user-identifier বা set-group-identifier বিটগুলোকে কোন প্রভাব নেয়ার\n"
-"অনুমতি দেবেন না। (এটা যদিও নিরাপদ দেখাচ্ছে, কিন্তু অনিরাপদ হতে পারে যদি আপনার "
-"suidperl(1))\n"
-"ইনস্টল করা থাকে।)"
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "ফাইল সিস্টেমকে শুধু পড়ার জন্য মাউন্ট করো।"
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "সকল I/O ফাইল সিস্টেম যুগপত্‍ভাবে হওয়া উচিত।"
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"একজন সাধারণ ব্যবহারকারীকে ফাইল সিস্টেম মাউন্ট করার অনুমতি দিন। মাউন্টিং\n"
-"ব্যবহারকারীর নাম mtab এ লেখা থাকে সেকারণে সে পুনরায় \n"
-"ফাইল সিস্টেমকে আনমাউন্ট করতে পারে।\n"
-"এই অপশন পরোক্ষভাবে noexec, nosuid, এবং nodev অপশনকে প্রকাশ করে।"
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "সাধারণ ব্যবহারকারীদের লেখার ক্ষমতা দিন"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "সাধারণ ব্যবহারকারীদের শুধু পড়ার ক্ষমতা দিন"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "১৬ মেগাবাইটের চাইতে ছোট পার্টিশনে আপনি JFS ব্যবহার করতে পারবেন না"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "৩২ মেগাবাইটের চাইতে ছোট পার্টিশনে আপনি ReiserFS ব্যবহার করতে পারবেন না"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "/usr -এর সাথে"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "সার্ভার"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"আমি %s যন্ত্রের পার্টিশন টেবিল পড়তে পাচ্ছি না, এটা আমার জন্য খুবই কলুষিত :(\n"
-"আমি এর উপর দিয়ে কাজ করতে, নষ্ট পার্টশন মুছে ফেলতে চেষ্টা করব(সব ডাটা হারিয়ে "
-"যাবে!)।\n"
-"অন্য সমাধান হচ্ছে Drakx কে পার্টিশন টেবিল পরিবর্তন করার অনুমতি না দেয়া।\n"
-"(ভুল হচ্ছে %s)\n"
-"\n"
-"আপনি কি সব পার্টিশন হারাতে রাজি?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "মাউন্ট পয়েন্টগুলি অবশ্যই / দিয়ে শুরু হতে হবে"
-
-# * = alphanumerical = বাংলাটা মনে পড়ছেনা
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "মাউন্ট পয়েন্টগুলিতে শুধু * অক্ষর থাকবে"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "এই পার্টিশনটি আগে থেকেই %s মাউন্টপয়েন্ট নামে আছে\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"আপনি একটি সফ্টওয়্যার RAID পার্টিশনকে রুট (/) হিসেবে নির্বাচন করেছেন।\n"
-"/boot পার্টিশন ছাড়া কোন বুটলোডার এটা হেন্ডেল করতে পারবেনা।\n"
-"অনুগ্রহ করে অবশ্যই একটি /boot পার্টিশন যোগ করুন"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "আপনি LVM লজিকাল ভলিউমকে %s মাউন্ট পয়েন্ট হিসেবে ব্যবহার করতে পারবেননা"
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"আপনি একটি সফ্টওয়্যার LVM লজিকাল ভলিউমকে রুট (/) হিসেবে নির্বাচন করেছেন।\n"
-"/boot পার্টিশন ছাড়া কোন বুটলোডার এটা হেন্ডেল করতে পারবেনা।\n"
-"অনুগ্রহ করে অবশ্যই একটি /boot পার্টিশন যোগ করুন"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-"আপনি lilo ইনস্টল করতে সক্ষম হবেন না (যতক্ষন পর্যন্ত lilo অনেকগুলো PV'তে একটি LV'কে "
-"ব্যবহার করতে পারবে না)"
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "root ফাইল সিস্টেমের মধ্যে এই ডিরেক্টরি থাকা উচিত"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"এই মাউন্ট পয়েন্টের জন্য আপনার একটি সঠিক ফাইল সিস্টেম (ext2/ext3, reiserfs, xfs, "
-"বা jfs) প্রয়োজন\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "আপনি %s মাউন্ট পয়েন্টের জন্য একটি এনক্রিপটেড ফাইল ব্যবহার করতে পারবেন"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "স্বয়ংক্রিয়-বন্টনের জন্য কোন খালি জায়গা নেই"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "কিছু করার নাই"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "ফ্লপি"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "জিপ"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "ডিস্ক"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "সিডিরম"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "সিডি/ডিভিডি রাইটিং সফ্টওয়্যার"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "ডিভিডি-রোম"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "টেপ"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "ভিডিওকার্ড"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "টিভিকার্ড"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "অন্যান্য মাল্টিমিডিয়া ডিভাইস সমূহ"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "সাউন্ডকার্ড"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "ওয়েব ক্যামেরা"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "প্রসেসর"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "ISDN এডোপ্টার সমূহ"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "ইথারনেটকার্ড"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "মডেম"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "ADSL এডোপ্টার সমূহ"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "মেমরি"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "AGP কন্ট্রোলার সমূহ"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "প্রিন্টার"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "জয়ষ্টিক"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA কন্ট্রলারসমূহ"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAID কন্ট্রলারসমূহ"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA কন্ট্রলারসমূহ"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire কন্ট্রলারসমূহ"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCIA কন্ট্রলারসমূহ"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI কন্ট্রলারসমূহ"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "ইউএসবি কন্ট্রলারসমূহ"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "ইউএসবি পোর্টসমূহ"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus কন্ট্রলারসমূহ"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "ব্রীজ এবং সিস্টেম কন্ট্রোলার সমূহ"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "কি-বোর্ড"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "মাউস"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "স্কেনার"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "অজানা/অন্যান্য"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "সিপিউ #"
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "অনুগ্রহ করে অপেক্ষা করুন.... কনফিগারেশন প্রস্তাব করা হচ্ছে"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "কোন বিকল্প ড্রাইভার নেই"
-
-# বিকল্প
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"আপনার সাউন্ড কার্ড (%s) যা আপনি বর্তমানে ব্যবহার \"%s\" করছেন তার জন্য পরিচিত অন্য "
-"কোন OSS/ALSA কোন ড্রাইভার নেই"
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "সাউন্ড কনফিগারেশন"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"এখানে আপনি আপনার সাউন্ড কার্ডের (%s) জন্য বিকল্প ড্রাইভার (হয় OSS অথবা ALSA) পছন্দ "
-"করতে পারেন।"
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"আপনি বর্তমানে %s\"%s\" ড্রাইভার ব্যবহার করছেন (আপনার সাউন্ড কার্ডের স্বাভাবিক "
-"ড্রাইভার \"%s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) ছিল প্রথম সাউন্ড API. এটা হচ্ছে একটি ওএস স্বাধীন সাউন্ড "
-"API (এটা বেশিরভাগ UNIX(tm) সিস্টেমে পাওয়া যায়) কিন্তু এটা খুব সাধারণ এবং "
-"স্বল্পসংখ্যক API.\n"
-"নতুন আর কি, OSS ড্রাইভার সব চাকা নতুন করে তৈরি করে।\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) হচ্ছে একটি নিয়ন্ত্রিত আর্কিটেকচার যা\n"
-"ISA, ইউএসবি এবং PCI cards এর একটি বড় সীমা সমর্থন করে।\n"
-"\n"
-"এটা OSS এর চেয়ে বেশি API প্রদান করে\n"
-"\n"
-"alsa ব্যবহার করতে, একজন ব্যবহার করতে পারে:\n"
-"- পুরাতন সমর্থিত OSS api\n"
-"- নতুন ALSA api যা অনেক সুবিধা প্রদান করে কিন্তু ALSA লাইব্রেরী কতৃক ব্যবহৃত।\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "ড্রাইভার"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "ট্রাবল শুটিং"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "নোটিশ"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"পুরাতন \"%s\" ড্রাইভার কালো তালিকা ভুক্ত।\n"
-"\n"
-"এটি কার্ণেল আনলোড করার সময় oops কে রিপোর্ট করে।\n"
-"\n"
-"নতুন \"%s\" শুধুমাত্র পরবর্তী বুটস্ট্র্যাপে ব্যবহৃত হবে।"
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "কোন ওপেন সোর্স ড্রাইভার নেই"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"আপনার সাউন্ড কার্ডের (%s) জন্য কোন ফ্রী ড্রাইভার নেই, কিন্তু একটি অংশিদারী ড্রাইভার "
-"\"%s\"-এ আছে।"
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "কোন পরিচিত ড্রাইভার নেই"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "আপনার সাউন্ড কার্ড (%s)-এর জন্য কোন পরিচিত ড্রাইভার নেই"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "অপরিচিত ড্রাইভার"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "ভুল: আপনার সাউন্ড কার্ডের \"%s\" ড্রাইভারটি তালিকায় নেই"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "সাউন্ড ট্রাবল শুটিং"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"ক্লাসিক বাগ সাউন্ড পরীক্ষক নিম্নলিখিত কমান্ডগুলো চালু করে:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" ডিফল্টভাবে আপনার কার্ড যেই ড্রাইভার \n"
-"ব্যবহার করছে তা আপনাকে বলবে\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" আপনার বর্তমানে ব্যবহৃত \n"
-"ড্রাইভারের কথা বলবে\n"
-"\n"
-"- \"/sbin/lsmod\" যদি এর মডিউল (ড্রাইভার) লোড হয় বা না হয় তবে সে ব্যাপারে "
-"পরীক্ষা \n"
-"করতে আপনাকে সক্রিয় করে তুলবে\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" এবং \"/sbin/chkconfig --list alsa\" যদি\n"
-"সাউন্ড এবং alsa সার্ভিসগুলো initlevel 3 তে চলার জন্য কন্‌ফিগার করা থাকে তাহলে \n"
-"আপনাকে বলবে\n"
-"\n"
-"- \"aumix -q\" যদি সাউন্ড বন্ধ থাকে বা না থাকে তাহলে আপনাকে বলবে\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" কোন প্রোগ্রাম সাউন্ড কার্ড ব্যবহার করছে সেটা বলবে\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "আমাকে যেকোন ড্রাইভার নিতে দাও"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "ইচ্ছেমত ড্রাইভার পছন্দ"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"আপনি যদি মনে করেন যে কোন ড্রাইভার আপনার কার্ডের জন্য ঠিক হবে\n"
-"তাহলে উপরের লিষ্ট থেকে আপনি একটি পছন্দ করে নিতে পারেন।\n"
-"\n"
-"আপনার \"%s\"-এর বর্তমান ড্রাইভার \"%s\""
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "সয়ং-সনাক্ত"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "অজানা|সাধারণ"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "অজানা|CPH05X (bt878) [প্রচুর প্রস্তুতকারক]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "অজানা|CPH06X (bt878) [প্রচুর প্রস্তুতকারক]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"বেশিরভাগ আধুনিক টিভি কার্ডের ক্ষেত্রেই GNU/Linux -এর bttv মডিউল সঠিক প্যারামিটার "
-"সয়ং সনাক্ত করে।\n"
-"যদি আপনার কার্ড সনাক্ত না হয়, আপনি জোর করে এই কার্ডের জন্য সঠিক টিউনার এবং "
-"কার্ডের ধরণ এখানে জোর করে দিতে পারেন। যদি প্রয়োজন হয় তাহলে শুধু আপনার কার্ডের "
-"প্যারামিটার নির্বাচন করুন।"
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "কার্ড মডেল:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "টিউনারের ধরণ:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "ক্যাপচার বাফারের সংখ্যা:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "mmap'ed ক্যাপচারের জন্য ক্যাপচার বাফারের সংখ্যা"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL সেটিং:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "রেডিও সাপোর্ট:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "রেডিও সাপোর্ট সক্রিয় করো"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"চালিয়ে যাওয়ার আগে, লাইসেন্সের শর্তগুলো আপনার সাবধানতার পড়া উচিত। এটা সম্পূর্ণ\n"
-"ম্যান্ড্রিব লিনাক্স ডিস্ট্রিবিউশন পূর্ণ করে। যদি আপনি এখানকার সব শর্তের সাথে একমত \n"
-"থাকেন, \"%s\" বাক্সটি চেক্‌ করুন। যদি না হয়, তাহলে \"%s\" বাটনে ক্লিক \n"
-"করলে আপনার কম্পিউটার রিবুট হবে।"
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "গ্রহণ"
-
-# সাম: 
-# \"shell\" = ?
-# bash
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"GNU/Linux একটি বহু‌-ব্যবহারকারী সিস্টেম যেখানে প্রতিটি ব্যবহারকারী নিজস্ব পছন্দ ও\n"
-"ফাইলসমূহ আলাদাভাবে রক্ষণাবেক্ষণ করতে পারে। কিন্ত এসব সংযোজিত ব্যবহারকারীরা,\n"
-"\"root\"‌ (যে কিনা সিস্টেম অ্যাডমিনিস্ট্রেটর) এর মত, তাদের নিজস্ব ফাইল ও "
-"কনফিগারেশন\n"
-"ছাড়া অন্য কিছু বদলাতে অনুমোদিত নয়। এটি সিস্টেমকে অনিচ্ছাকৃত বা অস্বাভাবিক পরিবর্তন "
-"থেকে রক্ষা করে,\n"
-"যা কিনা সম্পূর্ণ সিস্টেমের ক্ষতি করতে পারে। আপনাকে নিজের জন্য অন্তত একটি সাধারণ "
-"ব্যবহারকারী\n"
-" তৈরী করতে হবে -- যে অ্যাকাউন্টটি আপনি নিয়মিত কাজের জন্য ব্যবহার করবেন। যদিও "
-"\"root\"\n"
-" হিসেবে লগ ইন করে সব কাজই করা সম্ভব, এটি বিপদজনকও বটে! একটি ছোটখাটো ভুলের "
-"কারণে\n"
-" আপনার সম্পূর্ণ সিস্টেম অচল হয়ে যেতে পারে। একজন সাধারণ  ব্যবহারকারী খুব বড় ভুল "
-"করলেও হয়ত\n"
-" কিছু তথ্য হারাতে পারে তবে সম্পূর্ণ সিস্টেমের ক্ষতি করতে পারে না।\n"
-"\n"
-"প্রথম ক্ষেত্রটিতে একটি আসল নাম দিন। তবে এটি অত্যাবশ্যকীয় নয় -- আপনি অন্য কিছুও "
-"লিখতে\n"
-"পারেন। DrakX, এর প্রথম শব্দটি নিয়ে \"%s\" এ কপি করবে, যা দিয়ে কিনা এই "
-"ব্যবহারকারী\n"
-"সিস্টেমে লগ ইন করবে। প্রয়োজন হলে আপনি ডিফল্ট নামটি বদল করতে পারেন। এরপর আপনাকে\n"
-"একটি পাসওয়ার্ড দিতে হবে। নিরাপত্তার দৃষ্টিকোণ থেকে সাধারণ ব্যবহারকারীর পাসওয়ার্ড, "
-"\"root\" এর\n"
-"পাসওয়ার্ডের মত জরুরী নয় তবে এটিকে খালি রাখা বা সহজ পাসওয়ার্ড দেয়া উচিত নয়, কারণ "
-"এতে\n"
-"আপনার ফাইলসমূহ অরক্ষিত থেকে যায়।\n"
-"\n"
-"\"%s\" তে ক্লিক করার পর আপনি আরও ব্যবহারকারী তৈরী করতে পারেন। আপনার পরিবারের\n"
-"সদস্য ও বন্ধুদের জন্য আলাদা আলাদা একাউন্ট তৈরী করুন। শেষ হলে \"%s\" ক্লিক করুন।\n"
-"\n"
-"\"%s\" বাটনে ক্লিক করে আপনি একজন ব্যবহারকারীর ডিফল্ট \"শেল\" বদল করতে পারেন\n"
-"(ডিফল্ট মান bash)।\n"
-"\n"
-"সব ব্যবহারকারী তৈরীর পর আপনাকে একটি বেছে নিতে হবে যা কিনা কম্পিউটার বুট করার "
-"পর\n"
-"স্বয়ংক্রিয়ভাবে লগইন হবে। আপনি যদি এই ফিচারে আগ্রহী হন(এবং স্থানীয় নিরাপত্তা নিয়ে "
-"বিচলিত\n"
-"না হন), তবে পছন্দনুযায়ী ব্যবহারকারী ও উইন্ডো ম্যানেজার নির্বাচন করুন এবং \"%s\" "
-"টিতে ক্লিক\n"
-"করুন। অন্যথায় \"%s\" চেকবক্সটি আনচেক করুন।"
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "ইউজারের নাম"
-
-# পরবর্তি 
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "পরবর্তী"
-
-# সাম:
-# secondary = সহকারী?
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"আপনার হার্ড ড্রাইভে বর্তমানে নিম্নলিখিত লিনাক্স পার্টিশনগুলো বিদ্যমান।\n"
-"আপনি উইজার্ড কর্তৃক বাছাইকৃত সেটিংসমূহ রাখতে পারেন কারণ বেশীরভাগ\n"
-"সাধারণ ইনস্টলেশনের ক্ষেত্রে এটিই যথেষ্ট। যদি পরিবর্তন করতে চান, আপনাকে অন্তত একটি\n"
-"রুট পার্টিশন তৈরী করতে হবে (\"/\")। পার্টিশনের সাইজ খুব ছোট না হওয়া জরুরী, কারন\n"
-"অন্যথা আপনি যথেষ্ট সফ্টওয়্যার ইনস্টল করতে পারবেন না। আপনার তথ্যসমূহ আলাদা\n"
-"পার্টিশনে রাখতে চাইলে, আপনাকে আরও একটি \"/home\" পার্টিশন তৈরী করতে হবে\n"
-"(যা কিনা একাধিক লিনাক্স পার্টিশন থাকলেই সম্ভব)।\n"
-"\n"
-"পার্টিশনগুলো তালিকায় এভাবে দেখানো হয়েছে: \"নাম\", \"ধারণক্ষমতা\".\n"
-"\n"
-"\"নাম\" এর কাঠামো হচ্ছে: \"হার্ড ড্রাইভের ধরন\", \"হার্ড ড্রাইভ নাম্বার\",\n"
-"\"পার্টিশন নাম্বার\" (যেমন, \"hda1\").\n"
-"\n"
-"যদি আপনার হার্ড ড্রাইভটি IDE হার্ড ড্রাইভ হলে \"হার্ড ড্রাইভের ধরন\" হবে \"hd\", "
-"আর\n"
-" SCSI হার্ড ড্রাইভ হলে হবে \"sd\"।\n"
-"\n"
-"\"হার্ড ড্রাইভ নাম্বার\", হচ্ছে \"hd\" বা \"sd\" এর পরের একটি অক্ষর। IDE হার্ড "
-"ড্রাইভের\n"
-"জন্য:\n"
-"\n"
-" * \"a\" অর্থ \"প্রাথমিক IDE কনট্রোলারে মাস্টার হার্ড ড্রাইভ\";\n"
-"\n"
-" * \"b\" অর্থ \"প্রাথমিক IDE কনট্রোলারে স্লেভ হার্ড ড্রাইভ\";\n"
-"\n"
-" * \"c\" অর্থ \"সহকারী IDE কনট্রোলারে মাস্টার হার্ড ড্রাইভ\";\n"
-"\n"
-" * \"d\" অর্থ \"সহকারী IDE কনট্রোলারে স্লেভ হার্ড ড্রাইভ\".\n"
-"\n"
-"SCSI হার্ড ড্রাইভের জন্য, \"a\" অর্থ \"সর্বনিম্ন SCSI ID\", \"b\" অর্থ\n"
-"\"দ্বিতীয় সর্বনিম্ন SCSI ID\", ইত্যাদি।"
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"ম্যান্ড্রিব লিনাক্স ইনস্টলেশন কয়েকটি সিডি'তে ভাগ করা থাকে। যদি একটি চিহ্নিত "
-"প্যাকেজ\n"
-"অন্য সিডি'তে থেকে থাকে, তাহলে DrakX বর্তমান সিডি'টি বের করে দেয় এবং "
-"প্রয়োজনীয়টি\n"
-"প্রবেশ করাতে জিজ্ঞেস করে। যদি এরকম অনুরোধ না আসে, তাহলে \"%s\" তে ক্লিক করুন,\n"
-"যথাযথ প্যাকেজগুলো ইনস্টল হবে না।"
-
-# সাম: 
-# documentation = ডকুমেন্টেশন
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"এখন আপনাকে নির্বাচন করতে হবে আপনি কোন কোন প্রোগ্রাম সিস্টেমে ইনস্টল করতে চান।\n"
-"Mandriva Linux এর জন্য কয়েক হাজার প্যাকেজ রয়েছে, এবং ব্যাবস্থাপনার সুবিধার্থে "
-"সেগুলোকে\n"
-"অ্যাপ্লিকেশনের ধরন অনুযায়ী ভাগ করা হয়েছে।\n"
-"\n"
-"Mandriva Linux সব প্যাকেজগ্রুপসমূহ চারটি শ্রেণীতে ভাগ করে। আপনি বিভিন্ন শ্রেণীর\n"
-"অ্যাপ্লিকেশনমিলিয়ে ও মিশিয়ে ইনস্টল করতে পারেন, যেমন একটি ``Workstation''\n"
-"ইনস্টলেশনে আপনি ''Server'' শ্রেণী থেকে অ্যাপ্লিকেশন ইনস্টল\n"
-"করতে পারেন।\n"
-"\n"
-" * \"%s\": আপনি যদি আপনার মেশিনটি ওয়ার্কস্টেশন হিসেবে ব্যবহার করতে চান, "
-"Workstation''\n"
-"শ্রেণী থেকে এক বা একাধিক গ্রুপ নির্বাচন করুন।\n"
-"\n"
-" * \"%s\": আপনি যদি আপনার মেশিনটি প্রোগ্রামিংএর জন্য ব্যবহার করতে চান, সে "
-"অনুযায়ী\n"
-"গ্রুপ নির্বাচন করুন। \"LSB\" নামের বিশেষ গ্রুপটি আপনার সিস্টেমকে এমনভাবে\n"
-"কনফিগার করবে যাতে তা Linux Standard Base স্পেসিফিকেশনের সাথে যতদূর\n"
-"সম্ভব সামঞ্জস্য বজায় রাখে।\n"
-"\n"
-"\"LSB\" গ্রুপটি নির্বাচন করলে, ডিফল্ট \"2.6\" কার্নেল সিরিজের বদলে\n"
-"\"2.4\" সিরিজটি ইনস্টল হবে। এটি করা হয় সিস্টেমকে 100%%-LSB সামঞ্জস্যপূর্ণ\n"
-"করার জন্য। তবে, আপনি \"LSB\" গ্রুপটি নির্বাচন না করলেও আপনার সিস্টেম প্রায়\n"
-"100%%-LSB সামঞ্জস্যপূর্ণ হবে।\n"
-"\n"
-"* \"%s\": আপনার মেশিনটি যদি সার্ভার হিসেবে ব্যবহৃত হয়, আপনার মেশিনে কোন সাধারন\n"
-" সার্ভিসসমূহ ইনস্টল করতে চান তা  নির্বাচন করুন।\n"
-"\n"
-" * \"%s\": এখানে আপনার পছন্দ অনুযায়ী গ্রাফিক্যাল প্রতিবেশ নির্বাচন\n"
-"করুন। আপনি যদি গ্রাফিক্যাল ইন্টারফেস ব্যবহার করতে চান, অন্তত একটি অবশ্যই\n"
-"নির্বাচন করতে হবে।\n"
-"\n"
-"কোন গ্রুপ নামের উপর মাউস কার্সার রাখলে ঐ গ্রুপ সম্পর্কে টীকা প্রদর্শিত হবে।\n"
-"\n"
-"আপনি \"%s\" বক্সটি চেক করতে পারেন, যা কিনা প্রয়োজনীয় যদি আপনি প্যাকেজগুলো\n"
-"সম্পর্কে পরিচিত হন বা কোন কোন প্যাকেজ ইনস্টল হবে তা সম্পূর্ণভাবে নিয়ন্ত্রন\n"
-"করতে চান।\n"
-"\n"
-"\"%s\" মোডে ইনস্টলেশন শুরু করলে, আপনি সব গ্রুপ ডিসিলেক্ট করে নতুন প্যাকেজ\n"
-"ইনস্টলেশন বাতিল করতে পারেন। এটি একটি বিদ্যমান সিস্টেম মেরামত ও আপডেট\n"
-"করার জন্য প্রযোজ্য।\n"
-"\n"
-"আপনি যদি একটি সাধারণ ইনস্টলেশনের ক্ষেত্রে (আপগ্রেড নয়), সব গ্রুপ\n"
-"ডিসিলেক্ট করে থাকেন, তবে একটি পপআপ ডায়ালগে সর্বনিম্ন ইনস্টলেশনের কিছু\n"
-"অপশন পরামর্শ করা হবে:\n"
-"\n"
-"* \"%s\": একটি সক্রিয় গ্রাফিক্যাল ডেস্কটপের জন্য প্রয়োজনীয় সর্বনিম্ন প্যাকেজ ইনস্টল "
-"কর।\n"
-"\n"
-"* \"%s\": মূল সিস্টেম, প্রাথমিক ইউটিলিটিসমূহ ও তাদের ডকুমেন্টেশন ইনস্টল করে। এই "
-"ইনস্টলেশনটি সার্ভার সেটআপ করার জন্য উপযুক্ত।\n"
-"\n"
-"* \"%s\": একটি সক্রিয় Linux সিস্টেমের জন্য জরুরী সর্বনিম্ন সংখ্যক প্যাকেজ ইনস্টল করে। "
-"এ\n"
-" ইনস্টলেশনে আপনি শুধু একটি কমান্ড লাইন ইন্টারফেস পাবেন। ইনস্টলেশনে মোট সাইজ প্রায় "
-"৬৫\n"
-" মেগাবাইট।"
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "ওয়ার্কষ্টেশন"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "ডেভলপমেন্ট"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "গ্রাফিকাল পরিবেশ"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "আলাদাভাবে প্যাকেজ নির্বাচন"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "আপগ্রেড"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "X-এর সাথে"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "সাধারণ ডকুমেন্টেশন"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "এক্কেবারেই সল্প ইনস্টলেশন"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "সয়ংক্রিয় নির্ভরতা"
-
-# sam
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": \"%s\" বাটনে ক্লিক করলে প্রিন্টার কনফিগারেশন উইজার্ড খুলবে।\n"
-"প্রিন্টার কনফিগারেশন সম্বন্ধে আরো জানতে, \"স্টার্টার গাইড\" এর যথাযথ\n"
-"অধ্যায়ের পরামর্শ নিন। আমাদের সহায়িকাতে দেখানো ইন্টারফেসটি, ইনস্টলেশনে\n"
-"ব্যবহৃত ইন্টারফেসের অনুরুপ। "
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "কনফিগার"
-
-# সাম
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"এই ডায়ালগটি আপনি বুট করার সময় কি কি সার্ভিস শুরু করতে চান তা নির্বাচন করার জন্য।\n"
-"\n"
-"DrakX বর্তমান ইনস্টলেশনে বিদ্যমান সব সার্ভিস দেখাবে। প্রতিটি সার্ভিস ভালভাবে দেখুন "
-"এবং\n"
-"বুটের সময় যেগুলো প্রয়োজন না হয়, সেগুলো আনচেক করুন।\n"
-"\n"
-"একটি সার্ভিস নির্বাচন করলে, সার্ভিসটি সম্পর্কে সংক্ষিপ্ত তথ্য প্রদর্শিত হবে। আপনি যদি "
-"কোন সার্ভিসের\n"
-"আবশ্যকতা সম্পর্কে নিশ্চিত না হন তবে ডিফল্ট মানে রেখে দেয়াই নিরাপদ।\n"
-"\n"
-"!! আপনি আপনার মেশিন সার্ভার হিসেবে ব্যবহার করতে চাইলে খুব সাবধান থাকবেন: আপনি "
-"অবশ্যই\n"
-"কোন অবাঞ্ছনীয় সার্ভিস চালু করতে চান না কারন কিছু সার্ভিস সার্ভারে সক্রিয় করাটা "
-"বিপদজনক।\n"
-"এক কথায়, শুধু সেসব সার্ভিসই চালু করুন যেসব আপনার প্রয়োজন। !!"
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "হার্ডওয়্যারে ঘড়ি GMT-এ সেট করা"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "সয়ংক্রিয় সময় মেলানো"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"গ্রাফিক কার্ড\n"
-"\n"
-"   সাধারণত ইনস্টলার আপনার মেশিনে ইনস্টলকৃত গ্রাফিক কার্ড স্বয়ংক্রিয়ভাবে সন্ধান করবে\n"
-"এবং কন্‌ফিগার করবে। যদি এটি সঠিক না হয়, তাহলে আপনি এই তালিকা থেকে যেই কার্ড\n"
-"আপনি ইনস্টল করেছেন সেটা বেছে নিতে পারবেন।\n"
-"\n"
-"   এই অবস্থাতে যেখানে আপনার কার্ডের জন্য বিভিন্ন সার্ভার পাওয়া যায়, 3D \n"
-"acceleration সহ অথবা ছাড়া, আপনার প্রয়োজন অনুযায়ী সেরা সার্ভার বেছে নিতে\n"
-"আপনাকে জিজ্ঞেস করা হবে।"
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"মনিটর\n"
-"\n"
-"   সাধারণত ইনস্টলার আপনার মেশিনে সংযুক্ত মনিটর স্বয়ংক্রিয়ভাবে সন্ধান করবে\n"
-"এবং কন্‌ফিগার করবে। যদি এটি সঠিক না হয়, তাহলে আপনি এই তালিকা থেকে যেই মনিটর\n"
-"আপনার কম্পিউটারে সংযুক্ত করেছেন সেটা বেছে নিতে পারবেন।"
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"রেজ্যুলুশন\n"
-"\n"
-"   এখানে আপনার গ্রাফিক্‌স হার্ডওয়্যারের রেজ্যুলুশন এবং রংয়ের গভীরতা বেছে নিতে \n"
-"পারেন। আপনার প্রয়োজনের সাথে যেটি সবচেয়ে ভাল হয় তার যেকোন একটি বেছে নিন\n"
-"(ইনস্টলেশনের পর আপনি তা পরিবর্তন করতে সমর্থ হবেন)। বেছে নেয়া কন্‌ফিগারেশনের\n"
-"নমুনা মনিটরের ছবিতে দেখানো হচ্ছে।"
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"এই অবস্থাতে যেখানে আপনার কার্ডের জন্য বিভিন্ন সার্ভার পাওয়া যায়, 3D \n"
-"acceleration সহ অথবা ছাড়া, আপনার প্রয়োজন অনুযায়ী সেরা সার্ভার বেছে নিতে\n"
-"আপনাকে জিজ্ঞেস করা হবে।"
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"অপশন\n"
-"\n"
-"   এই ধাপগুলো বুট করার সময় স্বয়ংক্রিয়ভাবে আপনি যেখানে আপনার মেশিনের গ্রাফিকাল\n"
-"ইন্টারফেস বাছাই করার অনুমতি পাবেন। সুস্পষ্টভাবেই, যদি আপনার মেশিনকে একটি সার্ভার "
-"হিসেবে\n"
-"ব্যবহার করতে চান, তাহলে আপনি \"%s\" দিয়ে পরীক্ষা করে নিতে পারেন, অথবা যদি "
-"আপনি\n"
-"সফলভাবে ডিসপ্লে কন্‌ফিগার করতে না পারেন।"
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "শুণ্য স্থান ব্যবহার করো"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "উপস্থিত পার্টিশন ব্যবহার করো"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "উইন্ডোজ পার্টিশনের খালি জায়গা ব্যবহার করে"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "সম্পূর্ণ ডিস্ক মুছে ফেলো"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "উইন্ডোজ সরাও"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "হাতে হাতে ডিস্ক পার্টিশন"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "সয়ংক্রিয়-ইনস্টল ফ্লপি তৈরী করো"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "জবাব"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "সয়ংক্রিয়ভাবে"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "প্যাকেজের নির্বাচন সংরক্ষণ করে রাখো"
-
-# সাম
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"আপনি যদি পুরানো GNU/Linux পার্টিশন আবার ব্যবহার করতে চান, আপনি হয়ত কোন পার্টিশন "
-"নতুন করে ফরম্যাট করে পুরানো তথ্য মুছে ফেলতে চাইবেন। এটি করতে হলে, ঐ পার্টিশনগুলোও "
-"নির্বাচন করুন।\n"
-"\n"
-"মনে রাখবেন, সব পার্টিশন ফরম্যাট করা জরুরী নয়। যে পার্টিশনে অপারেটিং সিস্টেম থাকবে "
-"(যেমন \"/\", \"/usr\" বা \"/var\") সেটি অবশ্যই ফরম্যাট করতে হবে কিন্তু যেসব "
-"পার্টিশনের তথ্য আপনি সংরক্ষন করতে চান (সাধারনত \"/home\") সেগুলো ফরম্যাট করা "
-"অত্যাবশ্যকীয় নয়।\n"
-"\n"
-"পার্টিশন নির্বাচন করতে সাবধানতা অবলম্বন করবেন। ফরম্যাট করলে নির্বাচিত পার্টিশনের "
-"সব তথ্য মুছে যাবে এবং তা আর ফিরে পাওয়া যাবে না।\n"
-"\n"
-"পার্টিশন ফরম্যাট শুরু করতে \"%s\" চাপুন।\n"
-"\n"
-"আপনার নতুন Mandriva Linux অপারেটিং সিস্টেম ইনস্টেশনের জন্য আপনি যদি অন্য একটি "
-"পার্টিশন নির্বাচন করতে, তবে \"%s\" ক্লিক করুন।\n"
-"\n"
-"যদি আপনি পার্টিশনের জন্য ডিস্কের খারাপ ব্লক সনাক্ত করাতে চান তাহলে \"%s\" ক্লিক "
-"করুন।"
-
-# আগে
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "পূর্ববর্তী"
-
-# সাম
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"আপনি যখন Mandriva Linux ইনস্টল করবেন, সম্ভবত প্রথম রিলিজ থেকে কিছু\n"
-"প্যাকেজ আপডেট হয়ে গেছে। কোন সাধারন বা নিরাপত্তা ত্রুটি সমাধান করা হয়েছে।\n"
-"আপনাকে এই সুবিধাগুলি দেয়ার লক্ষ্যে এই আপডেটগুলো ইন্টারনেট থেকে ডাউনলোড\n"
-"করার সুযোগ দেয়া হয়েছে। যদি আপনার সক্রিয় ইন্টারনেট সংযোগ থাকে, \"%s\" চেক\n"
-"করুন, আর \"%s\" চেক করুন যদি আপাতত ইনস্টল করতে না চান।\n"
-"\n"
-"\"%s\" বাছাই করলে আপাকে কিছু ওয়েব লোকেশনের তালিকা দেয়া হবে যেখান থেকে\n"
-"আপডেট পাওয়া যাবে। আপনি আপনার কাছের একটি লোকেশন পছন্দ করুন। এরপর\n"
-"একটি প্যাকেজ নির্বাচন করার জন্য একটি  ট্রী দেখানো হবে। প্যাকেজগুলো দেখুন এবং\n"
-"ডাউনলোড করে ইনস্টল করতে \"%s\" বাটন চাপুন। অথবা \"%s\" ক্লিক করে বের হয়ে আসুন।"
-
-# ইনস্টল
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "ইনস্টল"
-
-# সাম
-# নিরাপত্তা স্তর
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"এই সময়ে DrakX আপনার মেশিনের জন্য আপনার ইচ্ছানুযায়ী নিরাপত্তা স্তর\n"
-"বেছে নেয়ার সুযোগ দেবে। সাধারন নিয়ম অনুযায়ী, যদি একটি মেশিনে জরুরী\n"
-"তথ্য থাকে বা মেশিনটি ইন্টারনেটে সংযুক্ত থাকে তবে নিরাপত্তা বাড়িয়ে দেয়া\n"
-"হয়। নিরাপত্তা যত বেশী, ব্যবহারের স্বাচ্ছন্দ্য তত কমে যায়।\n"
-"\n"
-"আপনি যদি নিশ্চিত না হন কোন অপশনটি রাখবেন তবে ডিফল্ট অপশনটিই রাখুন।\n"
-"পরবর্তীতে আপনি এটি draksec টুল (যেটি Mandriva Linux নিয়ন্ত্রন কেন্দ্রের একটি অংশ)\n"
-"দিয়ে পরিবর্তন করতে পারবেন।\n"
-"\n"
-"\"%s\" ক্ষেত্রটিতে যিনি নিরাপত্তার দায়িত্বে নিয়োজিত তার ই-মেইল অ্যাড্রেস দিন।\n"
-"নিরাপত্তা বিষয়ক বার্তাগুলো এই অ্যাড্রেসে পাঠানো হবে। "
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "সিকিউরিটি এ্যডমিনিস্ট্রেটর"
-
-# সাম
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"এই সময়ে আপনাকে Mandriva Linux যে পার্টিশনে ইনস্টল হবে তা নির্বাচন\n"
-"করতে হবে। যদি আগে থেকেই পার্টিশন তৈরী থাকে, (GNU/Linux এর পুর্বের\n"
-"কোন ইনস্টলেশনের কারনে বা অন্য কোন পার্টিশন টুল দিয়ে তৈরী করা) আপনি\n"
-"সেগুলো ব্যবহার করতে পারেন। অন্যথায় হার্ডড্রাইভ পার্টিশন তৈরী করতে হবে।\n"
-"\n"
-"পার্টিশন তৈরী করতে প্রথমে একটি হার্ডড্রাইভ নির্বাচন করুন। প্রথম পার্টিশন\n"
-"নির্বাচনের জন্য \"hda\", দ্বিতীয় পার্টিশনের জন্য \"hdb\", প্রথম SCSI ড্রাইভের\n"
-"জন্য \"sda\" ইত্যাদি ক্লিক করুন।\n"
-"\n"
-"নির্বাচিত ড্রাইভটি পার্টিশন করতে নিম্নলিখিত অপশনসমূহ ব্যবহার করুন:\n"
-"\n"
-" * \"%s\": এই অপশনটি  নির্বাচিত ড্রাইভের সব পার্টিশন মুছে দিবে\n"
-"\n"
-" * \"%s\": এই অপশনটি  আপনার হার্ডড্রাইভের খালি অংশে স্বয়ংক্রিয়ভাবে ext3 এবং\n"
-"swap পার্টিশন তৈরী করতে দিবে।\n"
-"\n"
-"\"%s\": আরও ফিচার ব্যবহার করার সুযোগ দেয়:\n"
-"\n"
-" * \"%s\": পার্টিশন টেবিলটি ফ্লপিতে সংরক্ষন করে যা কিনা পরবর্তীতে পার্টিশন\n"
-"টেবিল উদ্ধার করতে কাজে লাগে। এটি খুবই গুরুত্বপুর্ণ একটি ধাপ যেটি আপনার\n"
-"করা উচিত।\n"
-"\n"
-" * \"%s\": ফ্লপি ডিস্কে সংরক্ষিত পার্টিশন টেবিল এনে তা পুর্বাবস্থায় ফিরিয়ে নেয়।\n"
-"\n"
-" * \"%s\": আপনার পার্টিশন টেবিল নষ্ট হলে আপনি এই অপশনটি দিয়ে তা মেরামত\n"
-"করার চেষ্টা করতে পারেন। অনুগ্রহ করে সাবধানতা অবলম্বন করবেন এবং মনে রাখবেন\n"
-"এই প্রক্রিয়া সবসময় সফল নাও হতে পারে।\n"
-"\n"
-" * \"%s\": সব পরিবর্তন বাতিল করে দিয়ে হার্ডড্রাইভের পুর্বের মূল পার্টিশন টেবিল লোড "
-"করে।\n"
-"\n"
-" * \"%s\": এই অপশনটি অনির্বাচিত করলে, ব্যবহারকারীদের রিমুভেবল মাধ্যম যেমন\n"
-"ফ্লপি এবং CD-ROM নিজে নিজে মাউন্ট/আনমাউন্ট করার প্রায়োজন পরবে।\n"
-"\n"
-" * \"%s\": এই অপশনটি ব্যবহার করুন যদি হার্ডড্রাইভ পার্টিশন আপনি উইজার্ডের\n"
-"মাধ্যমে করতে চান। পার্টিশন সম্বন্ধে ভাল ধারনা না থাকলে এই অপশনটি পরামর্শনীয়।\n"
-"\n"
-" * \"%s\": এই অপশনটি ব্যবহার করে পরিবর্তনগুলো বাতিল করুন।\n"
-"\n"
-" * \"%s\": আপনার পার্টিশনে আরও কিছু কাজ (ধরন, অপশন ফরম্যাট) করার অপশন\n"
-"দেয় ও হার্ডড্রাইভ সম্পর্কে আরও তথ্য দেয়।\n"
-"\n"
-" * \"%s\": পার্টিশন করা শেষ হলে এই অপশন আপনার সেটিংগুলো ডিস্কে সংরক্ষণ করবে।\n"
-"\n"
-"পার্টিশনের সাইজ ঠিক করতে আপনি কীবোর্ডের তীর চিহ্নিত কীগুলো ব্যবহার করতে পারেন।\n"
-"\n"
-"দ্রষ্টব্য: আপনি যেকোন অপশন কীবোর্ড দিয়ে নির্বাচন করতে পারেন। পার্টিশন নির্বাচন\n"
-"করতে [Tab] এবং [Up/Down] তীর চিহ্নগুলো ব্যবহার করুন।\n"
-"\n"
-"যখন একটি পার্টিশন নির্বাচন অবস্থায় আছে, আপনি নিম্নলিখিত কীগুলো ব্যবহার করতে "
-"পারেন:\n"
-"\n"
-" * Ctrl-c নতুন পার্টিশন তৈরী করার জন্য (যখন একটি খালি পার্টিশন নির্বাচন করা "
-"হয়েছে)\n"
-"\n"
-" * Ctrl-d একটি পার্টিশন মুছে দিতে\n"
-"\n"
-" * Ctrl-m মাউন্ট পয়েন্ট সেট করতে\n"
-"\n"
-"বিদ্যমান ফাইল সিস্টেমের ধরন সম্পর্কে জানতে হলে \"Reference Manual\" এর\n"
-"ext2FS অধ্যায়টি পড়ুন।\n"
-"\n"
-"আপনি যদি PPC মেশিনে ইনস্টল করেন, তাহলে আপনাকে yaboot বুটলোডারের\n"
-"ব্যবহারের জন্য একটি  ছোট অন্তত ১ এমবি এর HFS \"বুটস্ট্র্যাপ\" পার্টিশন তৈরী করতে "
-"হবে।\n"
-"আপনি যদি পার্টিশনটি আরও বড় করতে চান, যেমন ৫০ MB, আপনি কোন জরুরী বুট সমস্যার\n"
-"জন্য একটি আলাদা কার্নেল এবং ramdisk তৈরী করে এই পার্টিশনে রাখতে পারেন।"
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "রিমুভযোগ্য মিডিয়া সয়ংক্রিয়ভাবে মাউন্ট করা হচ্ছে"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "সাধারণ/দক্ষ মোডের মধ্যে পরিবর্তন"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"%s\": বর্তমান দেশ নির্বাচন পরীক্ষা করুন। আপনি যদি এই দেশের জন্য না হন,\n"
-"তাহলে \"%s\" বাটনে ক্লিক করুন এবং অন্য একটি বেছে নিন। যদি আপনার দেশ\n"
-"উল্লেখিত তালিকায় না থাকে, তাহলে \"%s\" বাটনে ক্লিক করে সম্পূর্ণ দেশের তালিকায় "
-"পেয়ে যান।"
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-
-# সাম
-# ইনস্টলেশন
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"আপনার ভাষা নির্বাচনের উপর ভিত্তি করে, DrakX স্বয়ংক্রিয়ভাবে একটি কীবোর্ড\n"
-"কনফিগারেশন বেছে নেবে। এই নির্চনটি বাঞ্ছনীয় কিনা দেখে নিন বা অন্য একটি\n"
-"লেআউট পছন্দ করুন।\n"
-"\n"
-"আপনার ভাষার সাথে সম্পূর্ন মিলিয়ে কীবোর্ড আপনি নাও পেতে পারেন:\n"
-"যেমন যদি আপনি ইংরেজী ভাষাভাষী একজন সুইস নাগরিক হন, আপনি সুইস কীবোর্ড\n"
-"ব্যবহার করতে পারেন। কিন্তু আপনি যদি ইংরেজী ভাষী হয়ে Quebec এ বসবাস\n"
-"করেন আপনার পরিস্থিতি এমন হতে পারে যেখানে country-set কীবোর্ড এবং\n"
-"নিজস্ব ভাষা একই নয়। যেকোন ক্ষেত্রেই আপনি আপনি একটি তালিকা থেকে সঠিক\n"
-"কীবোর্ডটি বেছে নিতে পারেন।\n"
-"\n"
-"সমর্থিত কীবোর্ডের তালিকা দেখতে \"%s\" বাটনে ক্লিক করুন।\n"
-"\n"
-"যদি আপনি নন‌-ল্যাটিন বর্ণমালার কীবোর্ডে লেআউট বাছাই করেন, পরবর্তী ডায়ালগটি\n"
-"আপনাকে ল্যাটিন ও নন‌-ল্যাটিন কীবোর্ডের মধ্যে সুইচ করার জন্য একটি কী বাইন্ডিং\n"
-"বাছাই করতে হবে।"
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "স্পেনীয়"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "চাকার বৈশিষ্ঠ অনুহকরণ"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Universal | যে কোন PS/2 এবং ইউএসবি মাউস"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"সঠিক পোর্টটি নির্বাচন করুন। যেমন, উইন্ডোজের \"COM1\" পোর্টটি GNU/Linux-এ\n"
-"\"ttyS0\" নামে পরিচিত।"
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "অনুমোদন"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-
-# সাম 
-# emulate = এমুলেট?
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"এখন সময় আপনার কম্পিউটারের জন্য একটি প্রিন্টিং সিস্টেম নির্বাচন করার। অনান্য\n"
-"অপারেটিং সিস্টেম আপনাকে একটি অপশন দিতে পারে কিন্তু Mandriva Linux দেবে দুটি।\n"
-"প্রিন্টিং সিস্টেমগুলো বিভিন্ন কনফিগারেশনের জন্য প্রযোজ্য।\n"
-"\n"
-" * \"%s\" -- অর্থ হচ্ছে \"প্রিন্ট করো, সারিতে রাখবেনা\". এটি নির্বাচন করুন যদি "
-"আপনার কোন\n"
-"প্রিন্টারের সাথে সরাসরি সংযোগ থাকে, আপনি প্রিন্টার জ্যাম থেকে জরুরীভাবে বের হয়ে "
-"যেতে\n"
-"চান এবং যদি আপনার নেটওয়ার্ক প্রিন্টার না থাকে।(\"%s\" শুধুমাত্র খুবই সাধারন "
-"নেটওয়ার্ক\n"
-"সামলাতে পারে এবং কিছুটা ধীর হয়)। এটি আপনার GNU/Linux এর প্রথম অভিজ্ঞতা হলে\n"
-"আপনার \"pdq\" ব্যবহার করাটাই শ্রেয়।\n"
-"\n"
-" * \"%s\" অর্থ \"সাধারন Unix প্রিন্টিং সিস্টেম\" এবং এটি আপনার স্থানীয় প্রিন্টার "
-"হোক\n"
-"বা পৃথিবীর অন্য প্রান্তে অবস্থিত কোন প্রিন্টারই হোক যেকোন ক্ষেত্রেই একটি উত্‍কৃষ্ট "
-"সিস্টেম।\n"
-"এটি কনফিগার করতে সহজ এবং পুরোনো \"lpd\" প্রিন্টিং সিস্টেমের জন্য সার্ভার বা "
-"ক্লায়েন্ট\n"
-"হিসেবে কাজ করতে পারে। অতএব এটি পুরানো অপারেটিং সিস্টেম যেগুলোর সার্ভিস প্রয়োজন\n"
-"তাদের সাথেও সামঞ্জস্যপূর্ণ। যদিও খুব শক্তিশালী, মূল সেটআপটি প্রায় \"pdq\" এর মত "
-"সহজ।\n"
-"আপনি যদি \"lpd\" সার্ভার এমুলেট করতে চান, তবে \"cups-lpd\" daemon টি চালু করতে\n"
-"ভুলবেন না। \"%s\" এর প্রিন্টার অপশন বাছাই করা ও প্রিন্টার ব্যবস্থাপনার জন্য একটি "
-"গ্রাফিক্যাল\n"
-"ইন্টারফেস রয়েছে।\n"
-"\n"
-"আপনার বাছাইকৃত প্রিন্টিং সিস্টেমটি যদি আপনার পরে পছন্দ না হয়,\n"
-"তবে আপনি Mandriva Linux নিয়ন্ত্রন কেন্দ্র থেকে PrinterDrake চালিয়ে ও \"%s\" বাটন "
-"ক্লিক\n"
-"করে তা বদল করতে পারেন।"
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "দক্ষ"
-
-# সাম
-# check উচিত spelling, zwj didn't work for me... 
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX প্রথমে আপনার কম্পিউটারে বিদ্যমান IDE ডিভাইস সনাক্ত করবে। এটি আপনার\n"
-"সিস্টেমে এক বা একাধিক PCI SCSI কার্ডের জন্যেও স্ক্যান করবে। যদি SCSI কার্ড পাওয়া\n"
-"যায়, DrakX নিজে নিজেই সঠিক ড্রাইভারটি ইনস্টল করবে।\n"
-"\n"
-"যেহেতু হার্ডওয়্যার সনাক্তকরন কোন অব্যার্থ পক্রিয়া নয়, DrakX আপনার হার্ডড্রাইভ সনাক্ত\n"
-"নাও করতে পারে। এ ক্ষেত্রে আপনাকে হার্ডওয়্যারটি নিজ হাতে নির্দিষ্ট করে দিতে হবে।\n"
-"\n"
-"PCI SCSI adapter নিজ হাতে নির্দিষ্ট করে দিতে হলে, DrakX আপনাকে জিজ্ঞাসা করবে\n"
-"আপনি অপশন কনফিগার করতে চান কিনা। আপনার DrakX কে হার্ডওয়্যারটির নির্দিষ্ট কার্ডের\n"
-"অপশনের জন্য প্রোব করতে দেয়া উচিত্‍ যা কিনা adapter ইনিশিয়ালাইজ করতে প্রয়োজন।\n"
-"বেশীরভাগ ক্ষেত্রে DrakX এই কাজটি কোন ঝামেলা ছাড়াই সম্পন্ন করবে।\n"
-"\n"
-"DrakX যদি প্রোব করে হার্ডওয়্যারে পাঠানোর জন্য প্যারামিটারগুলো নির্ধারন করতে না "
-"পারে\n"
-"তাহলে আপনাকে তা নিজে হাতে কনফিগারেশন করতে হবে।\n"
-" "
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\": যদি আপনার সিস্টেমে একটি সাউন্ড কার্ড পাওযা যায়, সেটা এখানে দেখানো হবে।\n"
-"যদি আপনি জানান যে আসলে এই সাউন্ড কার্ডটি আপনার সিস্টেমে উপস্থিত নেই, তাহলে আপনি\n"
-"বাটনে ক্লিক করুন এবং অন্য একটি ড্রাইভার বেছে নিন।"
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "সাউন্ডকার্ড"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "টাইমজোন"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "টিভি কার্ড"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "ISDN কার্ড"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "গ্রাফিকাল ইন্টারফেস"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "নেটওয়ার্ক"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "প্রক্সিসমূহ"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "সিকউরিটি লেভেল"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "ফায়ারওয়াল"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "বুটলোডার"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "সার্ভিস সমূহ"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"হার্ড ড্রাইভ বেছে নিন যেটি আপনি আপনার নতুন ম্যান্ড্রিব লিনাক্স পার্টিশন ইনস্টল করার "
-"জন্য\n"
-"মুছে ফেলতে চান। সাবধান, এই ড্রাইভে থাকা সকল ডাটা হারিয়ে যাবে এবং আর কখনই\n"
-"পাওয়া যাবে না!"
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"যদি এই হার্ড ড্রাইভে থাকা সব ডাটা এবং পার্টিশন মুছে ফেলতে চান তাহলে আপনি\n"
-"\"%s\"তে ক্লিক করুন। সাবধান, \"%s\"তে ক্লিক করার পর, উইন্ডোজ ডাটাসহ,\n"
-"আপনি এই হার্ড ড্রাইভে থাকা কোন ডাটা এবং পার্টিশন ফিরে\n"
-"পাবেন না।\n"
-"\n"
-"এই অপারেশনের মাধ্যমে হার্ড ড্রাইভের উপস্থিত ডাটা এবং পার্টিশন হারাতে না চাইলে \"%s"
-"\"তে ক্লিক করুন।"
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "পরবর্তী ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- পূর্ববর্তী"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"আপনার কার্ণেলের কার্ণেল মডিউলগুলোতে প্রবেশ করতে পারছে না (%s ফাইলটি হারিয়া "
-"গেছে), এর স্বাভাবিক অর্থ হচ্ছে আপনার বুট ফ্লপি ইনস্টলেশন মিডিয়ামের সাথে sync এ নেই "
-"(অনুগ্রহ করে একটি নতুন বুট ফ্লপি তৈরী করুন)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "আপনাকে অবশ্যই %s-ও ফরমেট করতে হবে"
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr "আপনার কি আরও একটি মাধ্যম আছে?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-"নিম্নলিখিত মিডিয়া পাওয়া যাবে এবং ব্যবহৃত হবে : %s ইনস্টল করার সময়।\n"
-"\n"
-"\n"
-"আপনার কি কন্‌ফিগার করার জন্য কোন সংযোজিত ইনস্টলেশন মিডিয়া আছে?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "সিডি-রম"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "নেটওয়ার্ক (http)"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "নেটওয়ার্ক (ftp)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "১ নং সিডিটি আবার প্রবেশ করান"
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "কোন ডিভাইস পাওয়া যায় নি"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "সিডিটি প্রবেশ করান"
-
-# সাম
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "CD-ROM মাউন্ট প্রক্রিয়া ব্যর্থ হয়েছে"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "mirror এর ইউ-আর-এল?"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "এই mirror এ কোন hdlist ফাইল পাওয়া যাচ্ছে না"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"আপনার সিডিরম পরিবর্তন করুন!\n"
-"অনুগ্রহ করে \"%s\" লেখা সিডিরমটি আপনার ড্রাইভে প্রবেশ করান এবং যখন সেটা হয়ে যাবে "
-"ঠিক আছে চাপুন।"
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr "কপি সম্পন্ন হচ্ছে"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"আপনি নিম্মলিখিত সার্ভার(গুলো) বেছে নিয়েছেন: %s\n"
-"\n"
-"\n"
-"এই সার্ভারগুলো ডিফল্টভাবেই চালু করা থাকে। তাদের কোন নিরাপত্তা সমস্যা\n"
-"নেই, কিন্তু নতুন কিছুর ক্ষেত্রে তার প্রয়োজন আছে। সেক্ষেত্রে আপনি অবশ্যই সেগুলোকে\n"
-"যত তাড়াতাড়ি সম্ভব আপগ্রেড করার ক্ষেত্রে নিশ্চিত হোন।\n"
-"\n"
-"\n"
-"আপনি কি আসলেই এই সার্ভারগুলো ইনস্টল করতে চান?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"আপনার সিস্টেম আপগ্রেড করার ক্ষেত্রে নিম্নলিখিত প্যাকেজগুলো মুছে যাবে: %s\n"
-"\n"
-"\n"
-"আপনি কি আসলেই এই প্যাকেজগুলো মুছে ফেলতে চান?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "%s ফাইল পড়াতে ত্রুটি"
-
-# সাম
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "নিম্নলিখিত ডিস্কগুলো নামান্তর করা হয়েছে:"
-
-# সাম
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr "%s (পূর্বের নাম %s)"
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"একটি ভুল হয়ে গেছে - কোন সঠিক যন্ত্র পাওয়া যায়নি যেখানে নতুন ফাইল সিস্টেম তৈরি করা "
-"হবে। অনুগ্রহ করে এই সমস্যার কারণের জন্য আপনার হার্ডওয়্যার পরীক্ষা করুন"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "এইচ-টি-টি-পি"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "এফ-টি-পি"
-
-# সাম
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-# সাম
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr "অনুগ্রহ করে একটি মিডিয়া নির্বাচন করুন"
-
-# সাম
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr "অগ্রহণযোগ্য মিডিয়া %s"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "এই ফাইলটি আগে থেকেই আছে। করব?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "পার্টিশন করার আগে স্ক্রিনশট তৈরী করা যায়নি"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "%s -এ ইনস্টল করার পরে স্ক্রিনশট পাওয়া যাবে"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "সিস্টেম ইনস্টলেশন"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "সিস্টেম কনফিগারেশন"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"আপনার কম্পিউটারের কিছু হার্ডওয়্যার কাজ করার জন্য ``মালিকানার'' ড্রাইভার প্রয়োজন।\n"
-"আপনি তাদের সম্পর্কে এখান থেকে তথ্য নিতে পারবেন: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"আপনার অবশ্যই একটি root পার্টিশন থাকতে হবে।\n"
-"সেকারণে, একটি পার্টিশন তৈরি করুন (অথবা ইতিমধ্যেই তৈরি একটিতে ক্লিক করুন)।\n"
-"তারপর ``Mount point'' বেছে নিন এবং সেটাকে `/' তে সেট করুন"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"আপনার কোন swap পার্টিশন নেই\n"
-"\n"
-"তবুও আগাবো?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "আপনার /boot/efi -এ অবশ্যই একটি FAT পার্টিশন থাকতে হবে"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "নতুন পার্টিশন তৈরী করার জন্য যথেষ্ট পরিমান খালি জায়গা নেই"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "আগের পার্টিশনগুলি ব্যবহার করো"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "ব্যবহারের জন্য এখানে উপস্থিত কোন পার্টিশন নেই"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "লুপ ব্যাকের জন্য উইন্ডোজের পার্টিশন ব্যবহার করো"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linux4Win-এর জন্য আপনি কোন পার্টিশন ব্যবহার করতে চান?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "সাইজ পছন্দ করো"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "মেগাবাইটে রুট পার্টিশনের সাইজ:"
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "মেগাবাইটে সোয়াপ পার্টিশনের সাইজ:"
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "লুপব্যাকে ব্যবহারের জন্য কেন FAT পার্টিশন নেই (অথবা পর্যাপ্ত জায়গা নেই)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "আপনি কোন পার্টিশন রি-সাইজ করতে চান?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"FAT আকার পরিবর্তক আপনার পার্টিশন হস্তক্ষেপ করতে পারেনি, \n"
-"নিম্নের এই সমস্যাগুলো হয়েছে: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "আপনার উইন্ডোজের পার্টিশনের সাইজ হিসেব করা হচ্ছে"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"আপনার উইন্ডোজের পার্টিশনটি প্রচন্ড অসম। অনুগ্রহ করে আপনার কম্পিউটারটি উইন্ডোজে রি-বুট "
-"করে, ``defrag'' ইউটিলিটি চালান, পরে  রি-ষ্টার্ট করে আবার মেনড্রক ইনস্টলেশন চালান।"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"সতর্ক বানী!\n"
-"\n"
-"DrakX এখন আপনার উইন্ডোজের পার্টিশন আকার পরিবর্তন করবে। খুবই সাবধান: এই\n"
-"কার্যক্রমটি বিপদজ্জনক। আপনি যদি এরকম আগে করে না থাকেন, তাহলে আপনাকে\n"
-"ইনস্টলেশন থেকে বের হয়ে, উইন্ডোজের কমান্ডপ্রমপ্ট থেকে \"chkdsk c:\" চালাতে হবে\n"
-"(লক্ষ্য রাখবেন, \"scandisk\"-এর মত গ্রাফিক্যাল প্রোগ্রামগুলি যথেষ্ট নয়, আপনাকে\n"
-"অবশ্যই কমান্ডপ্রমপ্ট থেকে \"chkdsk\" চালাতে হবে), ঐচ্ছিকভাবে defrag চালাতে\n"
-"পরেন, পরে ইনস্টলেশন পুনরায় শুরু করবেন। আপনকে আপনার ডাটা ব্যাকআপ করা\n"
-"উচিত্‍‌। নিশ্চিত্‍‌ হলে ঠিক আছে চাপুন।"
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "আপনি কোথায় উইন্ডোজের জন্য কোন সাইজটি রাখতে চান"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "পার্টিশনসমূহ %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "উইন্ডোজ পার্টিশন আকার পরিবর্তন করা হচ্ছে"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT আকার পরিবর্তন ব্যর্থ হয়েছে: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"রি-সাইজ করার জন্য কোন FAT পার্টিশন নেই (অথবা যথেষ্ট পারিমান ফাঁকা জায়গা নেই)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "উইন্ডোজ(TM) মুছে ফেলো"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "আপনার একের অধিক হার্ড ড্রাইভ আছে, আপনি কোনটাতে লিনাক্স ইনস্টল করতে চান?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "%s ড্রাইভে উপস্থিত সমস্থ ডাটা এবং পার্টিশন নষ্ট হয়ে যাবে"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "fdisk ব্যবহার করো"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"এখন আপনি %s-কে পার্টিশন করতে পারেন।\n"
-"যখন হয়ে যাবে, তখন `w' চেপে সেভ করতে ভূলবেননা"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "আমি ইনস্টল করার জন্য কোন জায়গা পাচ্ছিনা"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX পার্টিশন সহায়ক এই সমস্থ সমাধান পেয়েছে:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "পার্টিশনে ব্যার্থ: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "নেটওয়ার্ককে চালু করা হচ্ছে"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "নেটওয়ার্ককে বন্ধ করা হচ্ছে"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"সাবধান: বিনামূল্যের সফ্‌টওয়্যার পেটেন্‌ট মুক্ত হওয়ার প্রয়োজন নেই, এবং কিছু বিনামূল্যের\n"
-"সফ্‌টওয়্যার আপনার দেশ কর্তৃক পেটেন্‌টকৃত হতে পারে। উদাহরণস্বরুপ, অতিরিক্ত ব্যবহারের\n"
-"জন্য MP3 decoder একটি লাইসেন্স যুক্ত থাকে (বিস্তারিত জানার জন্য দেখুন\n"
-"http://www.mp3licensing.com । আপনি যদি অনিশ্চিত হোন যদি এর যেকোন\n"
-"একটি আপনার জন্যও প্রযোজ্য হতে পারে, আপনার স্থানীয় আইন পরীক্ষা করুন।"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"অভিনন্দন, ইনস্টলেশন পুরোপুরিভাবে হয়ে গেছে।\n"
-"দ্নবুট মিডিয়া সরিয়ে ফেলুন, এবং পুনরায় চালু করার জন্য return চাপুন।\n"
-"\n"
-"\n"
-"এই সংস্করণের ম্যান্ড্রিব লিনাক্সের তথ্য এখানে পাওয়া যাচ্ছে,\n"
-"কোন প্রকার সমস্যার সমাধান এখানে পাওয়া যাচ্ছে:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"আপনার সিস্টেম কন্‌ফিগার করার তথ্য অফিসিয়াল ম্যান্ড্রিব লিনাক্স ব্যবহারকারীর গাইডের\n"
-"ইনস্টল হবার পরের অধ্যায়ে পাওয়া যাবে।"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s নকল মাউন্ট পয়েন্ট"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"কিছু গুরুত্বপূর্ণ প্যাকেজ সঠিকভাবে ইনস্টল হয়নি।\n"
-"হয় আপনার সিডিরম ড্রাইভ অথবা আপনার সিডিরম ত্রুটিপূর্ণ।\n"
-"কোন ইনস্টল কম্পিউটারে \"rpm -qpl media/main/*.rpm\" কমান্ডের মাধ্যমে সিডিরম "
-"পরীক্ষাকরুন\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "`%s' স্টেপে প্রবেশ করছি\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "প্যাকেজ গ্রুপ নির্বাচন"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "মোট সাইজ: %d / %d এমবি"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "বাজে প্যাকেজ"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "ভার্সন:"
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "সাইজ:"
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "প্রাধান্য:"
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "আপনি এই প্যাকেজটি নির্বাচন/অ-নির্বাচন করতে পারবেন না"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "%s না থাকার কারনে"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "%s যথেষ্ট না হবার কারনে"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "%s প্রচারের চেষ্টা চলছে"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "%s রাখার কারণে"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"আপনি এই প্যাকেজটি নির্বাচন করতে পারবেননা যেহেতু এটা ইনস্টল করার জন্য যথেষ্ট জায়গা "
-"ফাঁকা নেই"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "এই প্যাকেজগুলি ইনস্টল হতে যাচ্ছে"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "এই প্যাকেজগুলি অপসরিত হতে যাচ্ছে"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "এটি একটি বাধ্যতামূলাক প্যাকেজ, এটি কোনভাবেই বাদ দেয়া যাবেনা"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr ""
-"আপনি এই প্যাকেজটির অ-নির্বাচন করতে পারবেন না, এটা আগে থেকেই ইনস্টল হয়ে আছে"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"এই প্যাকেজটি অবশ্যই আপগ্রেড করতে হবে।\n"
-"আপনি কি নিশ্চিত্‍‌ এটা অ-নির্বাচন করতে চান?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "আপনি এই প্যাকেজটি অ-নির্বাচন করতে পারবেন না। এটা অবশ্যই আপগ্রেড হতে হবে"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "সংয়-নির্বাচিত প্যাকেজগুলি দেখাও"
-
-# সাম
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "নির্বাচনসমূহ লোড/সংরক্ষণ করো"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "প্যাকেজের নির্বাচন আপগ্রেড করা হচ্ছে"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "সর্বনিম্ন ইনস্টল"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "আপনি যেই প্যাকেজগুলি ইনস্টল করতে চান তা পছন্দ করুন"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "ইনস্টলেশন"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "নির্ধারণ চলছে"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "কোন বিস্তারিত ছাড়া"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "সময় বাকী আছে"
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "ইনস্টলেশনের প্রস্তুতি চলছে, অনুগ্রহ করে অপেক্ষা করুন..."
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d প্যাকেজ সমূহ"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "%s প্যাকেজ সমূহ ইনস্টল করা হচ্ছে"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "অস্বীকার"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"আপনার সিডিরম পরিবর্তন করুন!\n"
-"অনুগ্রহ করে \"%s\" লেখা সিডিরমটি আপনার ড্রাইভে প্রবেশ করান এবং যখন সেটা হয়ে যাবে "
-"ঠিক আছে চাপুন।\n"
-"যদি সেটা আপনার না থাকে, এই সিডিরম থেকে ইনস্টলেশন এড়িয়ে যেতে বাতিল চাপুন।"
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "প্যাকেজগুলো বিন্যস্ত করতে গিয়ে একটি ভুল ছিল:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "তবুও যাব?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "এই প্যাকেজগুলি ইনস্টল করতে সমস্যা হয়েছে:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "কনফিগার করা হয়নি"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-"নিম্নলিখিত ইনস্টলেশন মিডিয়া পাওয়া গেছে।\n"
-"যদি আপনি এগুলোর মধ্যকার কিছু এড়িয়ে যেতে চান, তাহলে এখন সেগুলোকে অনির্বাচিত করুন।"
-
-# সাম
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-"ইনস্টলেশনের আগে আপ‌নি সিডির তথ্যসমূহ হার্ডডিস্কে কপি করতে পারেন।\n"
-" এরপর হার্ডডিস্ক থেকে ইনস্টলেশন চলতে থাকবে এবং সিস্টেম সম্পূর্ন ইনস্টলেশনের পরও "
-"প্যাকেজগুলো রয়ে যাবে।"
-
-# সাম
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr "CD গুলো সম্পুর্ন কপি করো "
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "লাইসেন্স এগ্রিমেন্ট"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr "সংস্করণ মন্তব্য"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "অনুগ্রহ করে আপনার কীবোর্ড বিন্যাস পছন্দ করুন।"
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "এখানে উপস্থিত সমস্ত কীবোর্ডের তালিকা রয়োছে"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "ইনস্টল/আপগ্রড"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "এটা কি একটি ইনস্টলেশন না আপগ্রেড?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "%s আপগ্রড করো"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "%s -এর জন্য এনক্রিপশন কী"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "আপনার মাউসের ধরণ পছন্দ করুন"
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "মাউস পোর্ট"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "অনুগ্রহ করে আপনার মাউসটি যে সিরিয়াল পোর্টের সাথে সংযুক্ত আছে তা পছন্দ করুন।"
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "মাউসের বাটনগুলোর অনুকরণ"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "২ বাটন বিশিষ্ট মাউসকে অনুকরণ করো"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "৩ বাটন বিশিষ্ট মাউসকে অনুকরণ করো"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA কার্ডগুলি কনফিগার করা হচ্ছে..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "IDE কনফিগারেশন চলছে"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "কোন পার্টিশন বরাদ্দ নেই"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "মাউন্ট পয়েন্ট খোঁজার জন্য পার্টিশনগুলি স্কেন করা হচ্ছে"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "মাউন্ট পয়েন্টগুলি পছন্দ করুন"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"১ মেগাবাইটের bootstrap এর জন্য খালি জায়গা নেই! ইনস্টল অগ্রসর হবে, কিন্তু আপনার "
-"সিস্টেম বুট করার জন্য, আপনাকে DiskDrake থেকে bootstrap পার্টিশন তৈরী করতে হবে"
-
-# সাম: bootstrap = বুটস্ট্র্যাপ? 
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"আপনাকে একটি PPC PReP Boot বুটস্ট্র্যাপ তৈরী করতে হবে! ইনস্টলেশন অগ্রসর হবে, তবে "
-"আপনার সিস্টেম বুট করার জন্য, DiskDrake এর বুটস্ট্র্যাপ পার্টিশনটি প্রয়োজন"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "ফরমেট করার জন্য পার্টিশনটি পছন্দ করুন"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "খারাপ ব্লক চেক করব?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"%s ফাইল সিস্টেম পরীক্ষা করতে ব্যার্থ হয়েছে। আপনি কি এই ত্রুটিগুলি সারাতে চান? (মনে "
-"রাখবেন যে আপনি ডাটা হারাতে পারেন)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "ইনস্টলেশন সম্পূর্ন হবার জন্য যথেষ্ট swap জায়গা নেই, অনুগ্রহ করে কিছু যোগ করুন"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "উপস্থিত প্যাকেজসমুহ পর্যবেক্ষন করে আবার RMP ডাটাবেইজ তৈরী করা হচ্ছে..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "বরাদ্দকৃত প্যাকেজসমূহ খোঁজা হচ্ছে..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "যে সমস্থ প্যাকেজ ইনস্টল হয়ে আছে সেগুলি পর্যবেক্ষন করা হচ্ছে..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "আপগ্রেড করার জন্য প্যাকেজ খোঁজা হচ্ছে..."
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "আপনি একটি মিরর পছন্দ করুন যেখান থেকে প্যাকেজগুলি নেবেন"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"আপনার সিস্টেমর (%d > %d) ইনস্টল বা আপগ্রেড করার জন্য যথেষ্ট পরিমান জায়গা নেই"
-
-# সাম
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"অনুগ্রহ করে প্যাকেজ নির্বাচন লোড বা সংরক্ষণ বাছাই করুন।\n"
-"এই ফরম্যাটটি auto_install দ্বারা তৈরী ফাইলসমূহের মত।"
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "চাপ"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "সংরক্ষণ"
-
-# সাম: 
-# bad has been translated in many ways... নষ্ট, বাজে, খারাপ... please clarify
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "অগ্রহণযোগ্য ফাইল"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "উপস্থিত জায়গার চাইতে নির্বাচিত সাইজটি অনেক বড়"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "ইনস্টলের ধরণ"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"আপনি প্যাকেজের কোন গ্রুপ নির্বাচন করেননি।\n"
-"অনুগ্রহ করে আপনি যে ক্ষুদ্রাকৃতির ইনস্টলেশন চান তা পছন্দ করুন:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "সাধারন নির্দেশিকার সাথে (পরামর্শ দেয়া হচ্ছে!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "এক্কেবারেই ক্ষুদ্র ইনস্টলেশন (বিশেষ করে কোন urpmi ছাড়া)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "সকল"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"নিচের লিষ্টের সব সিডিগুলি আপনার থাকেল, ঠিক আছে ক্লিক্ করুন।\n"
-"এগুলির কোনটিই যদি না থাকে তাহলে, বাতিল ক্লিক্ করুন।\n"
-"যদি কিছু সিডি না থাকে, তাহলে সেগুলি অনির্বাচিত করে ঠিক আছে ক্লিক্ করুন।"
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" লেভেলের সিডি-রম"
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "ইনস্টলেশনের প্রস্তুতি চলছে"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"%s প্যাকেজ সমূহ ইনস্টল করা হচ্ছে\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "ইনস্টলের পরের কনফিগারেশন"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"আপনি এখন আপডেট প্যাকেজ ডাউনলোড করতে পারবেন। এই প্যাকেজগুলো\n"
-"এই ডিস্ট্রিবিউশন রিলিজ হবার পর আপডেট করতে পারেন। তারা নিরাপত্তা\n"
-"বা ত্রুটি নির্দিষ্ট ধারণ করতে পারে।\n"
-"\n"
-"এই প্যাকেজগুলো ডাউনলোড করতে, আপনার ইন্টারনেট সংযুক্তিতে কাজ করতে\n"
-"হবে।\n"
-"\n"
-"আপনি কি ইনস্টল আপডেট করতে চান?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "প্যাকেজের তালিকার জন্য মিররের সাথে সংযুক্ত করা হচ্ছে..."
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "%s মিররের সাথে সংযুক্ত হওয়া গেলনা"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "আপনি কি আবার চেষ্টা করতে চান?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "আপনার টাইমজোন কি?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "সয়ংক্রিয়ভাবে সময় মেলাও (NTP ব্যবহার করে)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP সার্ভার"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "সারাংশ"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "সি"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "হার্ডওয়্যার"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "দূরবর্তী CUPS সার্ভার"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "কোন প্রিন্টার নেই"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "আপনার কি একটি ISA সাউন্ড কার্ড আছে?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"ইনস্টল শেষ হবার পরে সাউন্ড কার্ড কনফিগার করার জন্য \"alsaconf\" অথবা \"sndconfig"
-"\" চালাও"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "কোন সাউন্ডকার্ড সনাক্ত হয়নি, ইনস্টলের পরে \"harddrake\" দিয়ে চেষ্টা করুন"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "গ্রাফিকাল ইন্টারফেস"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "নেটওয়ার্ট এবং ইন্টারনেট"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "কনফিগার করা হয়েছে"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "সিকিউরিটি"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "সক্রিয় হয়েছে"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "অকার্যকর করা হয়েছে"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "বুট"
-
-#  -PO: example: lilo-graphic on /dev/hda1
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s -এ %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "সার্ভিস সমূহ: %d সক্রিয় হয়েছে %d রেজিষ্টারের জন্য"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "আপনি X কনফিগার করেননি। আপনি কি নিশ্চিত এরকমটি চান?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Bootloader প্রস্তুত করা হচ্ছে..."
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"আপনার মেশিনটি মনে হচ্ছে একটি Oldworld বা অজানা মেশিন, yaboot বুটলোডারটি আপনার "
-"জন্য কাজ করবে না। ইনস্টল এগিয়ে যাবে, কিন্তু আপনার মেশিনকে বুট করার জন্য আপনাকে "
-"BootX বা অন্য কোন কিছু ব্যবহার করতে হবে। root fs এর জন্য কার্নেল প্রেরিত মান হবে: "
-"root=%s"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "আপনি কি aboot ব্যবহার করতে চান?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Aboot ইনস্টলে ব্যর্থ হয়েছে,\n"
-"জোর করে ইনস্টলের চেষ্টা করবো যদিও সেটা প্রথম পার্টিশনকে নষ্ট করতে পারে?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"এই নিরাপত্তা লেভেলে, উইন্ডোজ পার্টিশনের ফাইলে প্রবেশ শুধুমাত্র অ্যাডমিনিস্ট্রেটরের আছে।"
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s ড্রাইভে একটি ফাঁকা ফ্লপি ঢোকান"
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "ড্রাইভারের ডিস্কের জন্য অন্য একটি ফ্লপি ঢোকান"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "সয়ং ইনস্টল ফ্লপি তৈরী করা হচ্ছে..."
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"কিছু ধাপ সম্পূর্ন করা যায়নি।\n"
-"\n"
-"আপনি কি এখন বের হতে চান?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "সয়ংক্রিয় ইনস্টল ফ্লপি প্রস্তুত করো"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"যদি আপনি চান স্বয়ংক্রিয় ইনস্টল পুরোপুরি স্বয়ংক্রয়ভাবে হবে,\n"
-"সেক্ষেত্রে সেটা হার্ড ড্রাইভের কর্তৃত্বে!!\n"
-"(এর মানে হচ্ছে অন্য একটি বাক্সে ইনস্টল)।\n"
-"\n"
-"আপনি তার চেয়ে পুনরায় ইনস্টলেশন চালু করুন।\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#  -PO: This string must fit in a 80-char wide text screen
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> উপাদানগুলোর মধ্যে  | <Space> বাছাই | <F12> পরবর্তী স্ক্রীণ "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "একটি ফাইল পছন্দ করুন"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "যোগ"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "পরিবর্তন"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "মুছে ফেলো"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "সাধারণ"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "সমাপ্ত"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "করো"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "বাজে পছন্দ, আবার চেষ্টা করুন\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "আপনার পছন্দ? (সাধারনত %s)"
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"এই এন্ট্রিগুলি আপনাকে পূরণ করতে হবে:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Your choice? (0/1, সাধারনত `%s')"
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "বাটন `%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "আপনি কি এই বাটনে ক্লিক করতে চান?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "আপনার পছন্দ? (সাধারনত `%s'%s)"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr " সঠিক এন্ট্রর জন্য `void' প্রবেশ করুন"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> (%s)-থেকে পছন্দ করার অনেক কিছু আছে।\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"সম্পাদিত করতে চান আপনার পছন্দের এমন ১০-রেজ্ঞের প্রথম সংখ্যাটিকে অনুগ্রহ করে আপনি "
-"বেছে নিন,\n"
-"অথবা শুধুমাত্র চালিয়ে যাও'তে হিট করুন।\n"
-"আপনার পছন্দ? "
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> নোটিশ, একটি নাম পরিবর্তিত হয়েছে:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "পুনরায়-পেশ"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "চেজ (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "জার্মান"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "ডিভোর্ক"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "স্পেনিশ"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "ফিনিস"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "ফ্রান্স"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "নরিয়"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "পোলিশ"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "রাশিয়ান"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "সুইডিশ"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "UK কি-বোর্ড"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "US কি-বোর্ড"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "আরবীয়"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "আরমেনীয় (পুরনো)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "আরমেনীয় (টাইপরাইটার)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "আরমেনীয় (উচ্চারণভিত্তিক)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "আরবীয়"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "আজেরবাঈদজানি (ল্যাটিন)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "বেলজিয়ান"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "বাংলা (ইনস্ক্রিপ্ট লে-আউট)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "বাংলা (প্রভাত লে-আউট)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "বুলগেরিয়ান (উচ্চারণভিত্তিক)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "বুলগেরিয়ান (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "ব্রাজিলিয়ান (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "বসনিয়ান"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "বেলুরাশিয়ান"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "সুইশ (জার্মান লে-আউট)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "সুইশ (ফ্রেঞ্জ লে-আউট)"
-
-# sam: what about the leading '_: keyboard\n
-# banglish?
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "চেরোকী সিলাবিক্স"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "চেজ (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "German (কোন dead key ছাড়া)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "দৈবনগরী"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "ডেনিশ"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "ডেভোর্ক (US)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "ডেভোর্ক (Esperanto)"
-
-# sam
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "ডেভোরাক (ফ্রেঞ্চ‌)"
-
-# sam
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "ডেভোরাক (ইউকে)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "ডেভোর্ক (Norwegian)"
-
-# sam
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "ডেভোরাক (পোলিশ)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "ডেভোর্ক (Swedish)"
-
-# sam
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "যংকা/তিব্বতীয়"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "ইষ্টোনিয়ান"
-
-# sam
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "ফারোইয"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "জর্জিয়ান (\"রাশিয়ান\" লে-আউট)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "জর্জিয়ান (\"ল্যাটিন\" লে-আউট)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "গ্রীক"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "গ্রীক (পলিটোনিক)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "গুজরাটি"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "গুর্মুখী"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "ক্রোয়েশিয়ান"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "হাঙ্গেরিয়ান"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "আইরিশ"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "ইসরাঈল"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "ইসরাঈল (উচ্চারণভিত্তিক)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "ইরানি"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "আইসল্যান্ডের"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "ইটালীয়ান"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "ইনাকটিটুট"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "জাপানীজ ১০৬ কী"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "কান্নাডা"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "কোরিয়ান কীবোর্ড"
-
-# sam
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "কুর্দিশ (আরবী লিপি)"
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Kyrgyz কি-বোর্ড"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "ল্যাটিন আমেরিকান"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "ল্যাওটিআন"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "লিথ্যুনিয়ান AZERTY (আগের)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "লিথ্যুনিয়ান AZERTY (নতুন)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "লিথ্যুনিয়ান \"number row\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "লিথ্যুনিয়ান \"phonetic\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "লাটভিয়ান"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "মালায়লাম"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "ম্যাসিডোনিয়ান"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "মিয়ানমার (বার্মিজ)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "মঙ্গলীয়ান (কীরিল্লিক)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "মালটেসে (ইউকে)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "মালটেসে (ইউএস)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "ডাচ্‌"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "ওরিয়া"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "পোলিশ (qwerty লে-আউট)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "পোলিশ (qwertz  লে-আউট)"
-
-# sam
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "পাশতু"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "পর্তুগীজ"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "কানাডিয়ান (Quebec)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "রোমানিয়ান (qwertz)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "রোমানিয়ান (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "রাশিয়ান (উচ্চারণভিত্তিক)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "ছ্যামী (norwegian)"
-
-# আচ্ছা ফিনিস বানানটা অন্য কিছু লেখা উচিত্‍‌ না? কারন আমাদের দেশে ফিনিস বলতে একটা মশা মারার ঔষধের নাম বোঝায়। আর এখন যে ডেঙ্গু চারিদিকে!!!
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "ছ্যামী (সুইডিশ/ফিনিস)"
-
-# sam
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "সিন্ধি"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "স্লোভেনিয়ান"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "স্লোভেকিয়ান (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "স্লোভেকিয়ান (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "সার্বিয়ান (কিরিল্লিক)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "স্যাইরিক"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "স্যাইরিক (উচ্চারণভিত্তিক)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "তেলেগু"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "তামিল (ISCII-লে-আউট)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "তামিল (টাইপরাইটার-লে-আউট)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "থাই কী-বোর্ড (Kedmanee-লে-আউট)"
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "থাই কী-বোর্ড (TIS-820-লে-আউট)"
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "থাই কী-বোর্ড (Pattachote-লে-আউট)"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "তাজিক কী-বোর্ড"
-
-# sam
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "তুর্কমেনীয়"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "টার্কিস (ঐতিহ্যবাহী \"F\" মডেল)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "টার্কিস (ঐতিহ্যবাহী \"Q\" মডেল)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "উকরানিয়ান"
-
-# sam
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "উর্দূ কিবোর্ড"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US কী-বোর্ড (আন্তর্জাতিক)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "উজবেক (কীরিল্লিক)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "ভিয়েতনামিজ \"numeric row\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "ইয়ুগস্লোভিয়ান (ল্যাটিন)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "ডান Alt কী"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "পরপর দু'টি Shift কী"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "পরপর Control এবং Shift কী"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock কী"
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Shift এবং CapsLock কী একই সাথে"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "পরপর Control এবং Alt কী"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "পরপর Alt এবং Shift কী"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" কী"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "বাম \"Windows\" কী"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "ডান \"Windows\" কী"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "পরপর দু'টি Control কী"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "পরপর দু'টি Alt কী"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "বাম Shift কী"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "ডান Shift কী"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "বাম Alt কী"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "ডান Alt কী"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "ডান Control কী"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"বিভিন্ন লে-আউটের মধ্যে পরিবর্তন করার জন্য এখানে\n"
-"আপনি কী বা কী এর কম্বিনেশন পছন্দ করতে পারেন\n"
-"(যেমন: ল্যাটিন এবং বাংলা)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"ইনস্টলেশন শেষ হবার পরে এটা সক্রিয় হবে।\n"
-"ইনস্টল চলাকালীন, আপনাকে ডান Control কী ব্যবহার\n"
-"করে বিভিন্ন লে-আউটের মধ্যে পরিবর্তন করতে হবে।"
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "এনডোররা"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "সংযুক্ত আরব আমিরাত"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "আফগানিস্তান"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "আংটিগুয়া এবং বারবুদা"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "অ্যাংগুইল্লিয়া"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "আলবেনিয়া"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "আরমেনিয়া"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "নেদারল্যান্ড এ্যন্টিল্লিস"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "অ্যাংগোলা"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "এন্টার্কটিকা"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "আর্জেন্টিনা"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "আমেরিকান সামোয়া"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "অরুবা"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "আজেরবাঈজান"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "বসনিয়া এবং হার্জোগোভিনা"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "বার্বাডোস"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "বাংলাদেশ"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "বুর্কিনা ফাসো"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "বুলগেরিয়া"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "বাহরাইন"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "বুরুন্ডি"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "বেনিন"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "বার্মুডা"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "ব্রুনেই দারুসসালাম"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "বলিভিয়া"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "বাহামা"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "ভূটান"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "বৌভেট দীপসমূহ"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "বত্‌সওয়ানা"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "বেলারুস"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "বেলিজে"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "কোকোস (কেলিং) দীপসমূহ"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "কঙ্গো (কিংশাসা)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "মধ্য আফ্রিকান গণপ্রজাতন্ত্র"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "কঙ্গো (ব্রাজ্জাভিল্লে)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "কোট ডি'লভোরে"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "কুক দীপপুঞ্জ"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "চিলি"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "ক্যামেরুন"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "চীন"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "কলম্বিয়া"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "সারবিয়া এবং মোনটেংগ্র"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "কিউবা"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "কেপ ভার্দে"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "ক্রিসমাস দীপপুঞ্জ"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "সাইপ্রাস"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "ডজিবুতি"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "ডোমিনিকা"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "গণপ্রজাতন্ত্রী ডোমিনিকা"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "আলজেরিয়া"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "ইকুয়েডর"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "মিশর"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "পশ্চিম সাহারা"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "এরিট্রিয়া"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "ইথিওপিয়া"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "ফুজি"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "ফোকল্যান্ড দীপপুঞ্জ (মালভিনাস)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "মাক্রোনেশিয়া"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "ফারোয় দীপপুঞ্জ"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "গ্যাবোন"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "যুক্তরাজ্য"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "গ্রেনেডা"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "জর্জিয়া"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "ফ্রেঞ্জ গায়ানা"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "ঘানা"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "জিব্রাল্টার"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "গ্রীণল্যান্ড"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "জাম্বিয়া"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "গিনি"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "গুয়াদেলুপে"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "ইকুয়েটরিয়াল গিনি"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "দক্ষিন জর্জিয়া এবং দক্ষিন স্যান্ডউইচ্‌ দীপপুঞ্জ"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "গুয়াতেমালা"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "গুয়াম"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "গিনি-বিসাউ"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "গায়ানা"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "হংকং (চীন)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "হার্ড এবং ম্যাকডোনাল্ড দীপপুঞ্জ"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "হন্ডুরাস"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "ক্রোয়েশিয়া"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "হাইতি"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "ইন্দোনেশিয়া"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "ভারত"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "ব্রিটিশ ভারতীয় মহাসাগর সমরাজ্য"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "ইরাক"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "ইরান"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "আইসল্যান্ড"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "জামাইকা"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "জর্ডান"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "কেনিয়া"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "কিরগিজস্তান"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "কম্বোডিয়া"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "কিরিবাতি"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "কমোরোস"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "সেন্ট কিট্টস্‌ এবং নেভিস্‌"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "কোরিয়া (উত্তর)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "কোরিয়া"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "কুয়েত"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "কেম্যান দীপপুঞ্জ"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "কাজাকিস্তান"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "লাওস্‌"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "লেবানন"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "সেইন্ট লুইস"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "লিয়েচ্‌টেনস্তেইন"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "শ্রীলঙ্কা"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "লাইবেরিয়া"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "লেসথো"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "লিথুয়েনিয়া"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "লুক্সেমবার্গ"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "লাটভিয়া"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "লিবিয়া"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "মরক্কো"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "মোনাকো"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "মলডোভা"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "মাদাগাস্‌কার"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "মার্শাল দীপপুঞ্জ"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "ম্যাসিডোনিয়া"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "মালি"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "মিয়ানমার"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "মঙ্গোলীয়া"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "উত্তর মারিয়ানা দীপপুঞ্জ"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "মির্টিনিক্‌"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "মৌরিতানিয়া"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "মন্টসেরাত"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "মাল্টা"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "মরিসাস"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "মালদ্বীপ"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "মালাউ"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "মেক্সিকো"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "মালয়েশিয়া"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "মোজাম্বিক"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "নামিবিয়া"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "নিউ ক্যালেডোনিয়া"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "নাইজার"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "নরফোক দীপপুঞ্জ"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "নাইজেরিয়া"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "নাইসারাগুয়া"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "নেপাল"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "নাউরু"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "নিউও"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "ওমান"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "পানামা"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "পেরু"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "ফ্রেঞ্জ পলিনেশিয়া"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "পাপুয়া নিউগিনি"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "ফিলিপাইন"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "পাকিস্তান"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "সেন্ট পিয়েরে এবং মুকুলন"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "পিটকাইরন"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "পুয়ের্তোরিকো"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "প্যালেস্টাইন"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "পারাগুয়ে"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "পালাউ"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "কাতার"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "রিইউনিয়ন"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "রোমানিয়া"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "রুয়ান্ডা"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "সৌদী আরব"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "সলোমন দীপপুঞ্জ"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "সেইছিল্লেস"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "সুদান"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "সিঙ্গাপুর"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "সেন্ট হেলেনা"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "স্লোভেনিয়া"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "স্ভালবার্দ এবং জান মায়ান দীপপুঞ্জ"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "সিয়েররা লেওয়ান"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "সান মেরিনো"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "সেনেগাল"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "সোমালিয়া"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "সুরিনাম"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "সাও টোমি এবং প্রিন্সিপে"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "এই সাল্ভাদোর"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "সিরিয়া"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "সুইজারল্যান্ড"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "টার্ক এবং কাইকোস দীপপুঞ্জ"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "চাদ"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "দক্ষিন ফ্রান্স সাম্রাজ্য"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "টোগো"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "তাজিকিস্তান"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "তোকেলাউ"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "পূর্ব তিমুর"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "তুর্কমেনিস্তান"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "তানিসিয়া"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "টঙ্গো"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "তুর্কি"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "ট্রিনিদাদ এবং টোবাগো"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "টুভালু"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "তানজানিয়া"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "আকরাইসন"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "উগান্ডা"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "যুক্ত রাষ্ট্রের বাহিরের দীপপুঞ্জ"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "উরুগুয়ে"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "উজবেকিস্তান"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "ভ্যাটিক্যান"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "সেন্ট ভিনসেন্ট এবং গ্রানাডা"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "ভেনিজুয়েলা"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "ভার্জিন দীপপুঞ্জ (ব্রিটিশ)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "ভার্জিন দীপপুঞ্জ (ইউ.এস)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "ভিয়েতনাম"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "ভানাতু"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "ওয়েলস্ এবং ফুটুনা"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "সামোয়া"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "ইয়েমান"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "মায়োত্তে"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "জাম্বিয়া"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "জিম্বাবুয়ে"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "নিম্নের প্যাকেজসমুহ আপনার ইনস্টল করা উচিত: %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "%s -এ আপনাকে স্বাগতম"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "সার্কুলার মাউন্টস %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "প্রথমে লজিকাল ভলিউম সরিয়ে ফেলুন\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "প্যারামিটার"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "নেই"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "মডিউল কনফিগারেশন"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "আপনি এখানে প্রত্যেক মডিউলের প্যারামিটার কন্‌ফিগার করতে পারেন।"
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "%s ইন্টারফেসসমূহ পাওয়া গিয়েছে"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "আপনার কি আরও একটি আছে?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "আপনার কি কোন %s ইন্টারফেস আছে?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "হার্ডওয়্যারের তথ্য দেখুন"
-
-#  -PO: the first %s is the card type (scsi, network, sound,...)
-#  -PO: the second is the vendor+model name
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr "ইউএসবি কন্ট্রোলারের জন্য ড্রাইভার ইনস্টল করা হচ্ছে"
-
-#  -PO: the first %s is the card type (scsi, network, sound,...)
-#  -PO: the second is the vendor+model name
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "ফায়ারওয়ার কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে"
-
-#  -PO: the first %s is the card type (scsi, network, sound,...)
-#  -PO: the second is the vendor+model name
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "হার্ড ড্রাইভ কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে"
-
-#  -PO: the first %s is the card type (scsi, network, sound,...)
-#  -PO: the second is the vendor+model name
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "ইথার্নেট কন্ট্রোলার %s এর জন্য ড্রাইভার ইনস্টল করা হচ্ছে"
-
-#  -PO: the first %s is the card type (scsi, network, sound,...)
-#  -PO: the second is the vendor+model name
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s, %s কার্ডের জন্য ড্রাইভার ইনস্টল করা হচ্ছে"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(মডিউল %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"আপনি এখন হয়তো %s মডিউলের জন্য অপশন প্রদান করবেন\n"
-"লক্ষ্য রাখবেন যাতেকরে প্রবেশ করানো ঠিকানাগুলি 0x প্রিফিক্স দিয়ে হয়, যেমন '0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"আপনি এখন %s মডিউলের অপশন পেতে পারেন।\n"
-"অপশনের ফরম্যাট হচ্ছে ``name=value name2=value2 ...''।\n"
-"এই মুহূর্তে, ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "মডিউলের অপশন সমূহ:"
-
-#  -PO: the %s is the driver type (scsi, network, sound,...)
-#  -PO: the %s is the driver type (scsi, network, sound,...)
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "আমি কোন %s ড্রাইভার চেষ্টা করব?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"কোন কোন ক্ষেত্রে, ঠিকমত কাজ করার %s ড্রাইভারের কিছু অতিরিক্ত তথ্য প্রয়োজন, যদিও "
-"এটা \n"
-"স্বাভাবিকভাবে ওগুলো ছাড়াই ভাল কাজ করে। আপনি কি এর জন্য অতিরিক্ত অপশন বেছে "
-"নিতেচান অথবা আপনার\n"
-"মেশিনের প্রয়োজনীয় তথ্য আপনার ড্রাইভার দিয়ে ঠিক করে নিতে চান?\n"
-"সাময়িকভাবে, এটি আপনার কম্পিউটারকে হ্যাং করবে, কিন্তু এটা কোন কিছু নষ্ট করবে না।"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "স্বয়ংক্রিয় পরীক্ষা"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "অপশনসমূহ বর্ননা করুন"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"%s মডিউল লোড করতে ব্যর্থ।\n"
-"আপনি কি অন্য প্যারামিটার দিয়ে আবার চেষ্টা করতে চান?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "একটি নম্বর"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d কমা দিয়ে আলাদা করা নম্বর সমূহ"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d কমা দিয়ে আলাদা করা বাক্য সমূহ"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "কমা দিয়ে আলাদা করা নম্বর সমূহ"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "কমা দিয়ে আলাদা করা বাক্য সমূহ"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "সান - মাউস"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "সাধারণ"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "সাধারণ PS2 চাকা মাউস"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "সয়ংক্রিয়"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking মাউস"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "জিনিয়াস NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "জিনিয়াস NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "মাইক্রসফ্ট এক্সপ্লোরার"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "১ বাটন"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "সাধারণ ২ বাটন মাউসের অনুকরণ করো"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "চাকার সাথে ৩ বাটন মাউসের অনুকরণ করো"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "চাকা"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "সিরিয়াল"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "সাধারণ ২৩ বাটন মাউস"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "মাইক্রসফ্ট IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "লজিটেক্ MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "চাকার অনুকরণে লজিটেক্ MouseMan"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "মাউস সিস্টেম"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "লজিটেক্ CC সিরিজ"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "চাকার অনুকরণে লজিটেক্ CC সিরিজ"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "লজিটেক্ MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM সিরিজের"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM হিটট্যাবলেট"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (সিরিয়াল, পুরাতন C7 ধরনের)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "চাকার অনুকরণে Logitech Mouse (সিরিয়াল, পুরাতন C7 ধরনের)"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "চাকা অনুকরণে Kensington Thinking Mouse"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "busmouse"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "২ বাটন"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "৩ বাটন"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "চাকা অনুকরণে ৩ বাটন"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "সর্বজনীন"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "যে কোন PS/2 এবং ইউএসবি মাউস"
-
-# sam
-#: mouse.pm:89
-#, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "মাইক্রোসফ্ট Xbox Controller S"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "না"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "কোন মাউস নেই"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Synaptics Touchpad"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "অনুগ্রহ করে মাউসটি পরীক্ষা করুন"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "মাউসটি সক্রিয় করার জন্য,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "আপনার মাউসের চাকাটি ঘোরান!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "PPPoE ব্যবহার করো"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "PPTP ব্যবহার করো"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "DHCP ব্যবহার করো"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "অ্যালকাটেল স্পিডটাচ ইউএসবি"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr "- সনাক্ত হয়েছে"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "সাজেম (PPPoA ব্যবহার করে) ইউএসবি"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "সাজেম (DHCP ব্যবহার করে) ইউএসবি"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "ইন্টারনেটে সংযুক্ত করো"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"adsl এর সাথে সংযুক্ত হওয়ার সবচেয়ে সাধারণ উপায় হচ্ছে pppoe।\n"
-"কিছু সংযোগ PPTP ব্যবহার করে, কিছু DHCP ব্যবহার করে।\n"
-"যদি আপনি না জানেন, 'PPPoE ব্যবহার করুন' বেছে নিন"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "ADSL সংযোগের ধরন:"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "ওয়েব সার্ভার"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "ডোমেইন নেম সার্ভার (DNS)"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "SSH সার্ভার"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "FTP সার্ভার"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "মেইল সার্ভার"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP & IMAP সার্ভার"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "টেলনেট সার্ভার"
-
-# সাম
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr "উইন্ডোজ ফাইলস শেয়ারিং (SMB)"
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "CUPS সার্ভার"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Echo request (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "বিটTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"ড্র্যাকফায়ারওয়াল কন্‌ফিগারেটর\n"
-"\n"
-"এটি এই ম্যান্ড্রিব লিনাক্স মেশিনের জন্য একটী ব্যক্তিগত ফায়ারওয়াল কন্‌ফিগার করবে।\n"
-"একটি শক্তিশালী এবং একান্তভাবে নিযুক্ত ফায়ারওয়াল সমাধানের জন্য, অনুগ্রহ করে\n"
-"বিশেষ ম্যান্ড্রিব নিরাপত্তা ফায়ারওয়াল ডিস্ট্রিবিউশনে দেখুন।"
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"ড্র্যাকফায়ারওয়াল কন্‌ফিগারেটর\n"
-"\n"
-"নিশ্চিত হোন যে অন্য কিছু ব্যবহারের আগেই আপনি আপনার নেটওয়ার্ক/ইন্টারনেট প্রবেশ\n"
-"drakconnect দিয়ে কন্‌ফিগার করেছেন।"
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "আপনার কোন কোন সার্ভিসগুলোকে ইন্টারনেট থেকে সংযুক্ত হবার ক্ষমতা দিতে চান?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"আপনি একটি miscellaneous পোর্ট দিন। \n"
-"সঠিক উদাহরণ হচ্ছে: ১৩৯/tcp ১৩৯/udp ৬০০:৬১০/tcp ৬০০:৬১০/udp।\n"
-"তথ্যের জন্য /etc/services দেখুন।"
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"ভুল পোর্ট দেয়া হয়েছে: %s।\n"
-"সঠিক ফরম্যাট হচ্ছে \"port/tcp\" বা \"port/udp\", \n"
-"যেখানে পোর্ট হচ্ছে ১ এবং ৬৫৫৩৫ এর মধ্যে।\n"
-"\n"
-"আপনি পোর্টের সীমাও দিয়ে দিতে পারেন (যেমন: 24300:24350/udp)"
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "সবকিছু (কোন ফায়ারওয়াল ছাড়া)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "অন্যান্য পোর্ট"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "তালিকায় অন্তর্ভুক্ত নেই - নিজে নিজেই সম্পাদন করুন"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "আমি জানি না"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "পি-সি-আই"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "ইউএসবি"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "হাতে হাতে"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-# সাম
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr "উইন্ডোজ ড্রাইভারটি বেছে নিন (.inf ফাইল)"
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "হাতে হাতে পছন্দ"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "ইন্টার্নাল ISDN কার্ড"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "স্বনির্বাচিত কনফিগারেশন"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "সয়ংক্রিয় IP (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "সয়ংক্রিয় IP (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "বাকী বিশ্বের জন্য প্রটোকল"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "ইউরোপীয় প্রটোকল (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"বাকী বিশ্বের জন্য প্রটকোল\n"
-"কোন D-Channel ছাড়াই (ভাড়া নেয়া লাইনসমূহ)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel speedtouch ইউএসবি মডেম"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Sagem ইউএসবি মডেম"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Bewan মডেম"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "ECI Hi-Focus মডেম"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "ডায়নামিক হোস্ট কনফিগারেশন প্রটোকল (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "হাতে হাতে TCP/IP কনফিগারেশন"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "পয়েন্ট টু পয়েন্ট টর্নেলিং প্রটোকল (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "Ethernet মাধ্যমে PPP (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "ATM-এর মাধ্যমে PPP (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr "CAPI উপরে DSL"
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Bridged ইথারনেট LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Bridged ইথারনেট vC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "রাউটেড আই-পি LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "রাউটেড আই-পি VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "স্ক্রিপ্ট-ভিত্তিক"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "টার্মিনাল-ভিত্তিক"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "নেটওয়ার্ক এবং ইন্টারনেট কনফিগারেশন"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(%s পোর্টে সনাক্ত হয়েছে)"
-
-#  -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(%s সনাক্ত হয়েছে)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(সনাক্ত হয়েছে)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "LAN সংযোগ"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "ওয়্যারলেস সংযোগ"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ASDL সংযোগ"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "কেবল সংযোগ"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN কানেকশন"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "মডেম কানেকশন"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "কনফিগারের জন্য আপনার সংযোগ পছন্দ করুন"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"আপনি এখন %s সংযোগ কনফিগার করতে যাচ্ছেন।\n"
-"\n"
-"\n"
-" অগ্রসর হবার জন্য \"%s\" চাপুন।"
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "সংযোগ কনফিগারেশন"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "অনুগ্রহ করে নিম্নের দেখুন অথবা পূরন করুন"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "কার্ডের IRQ"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "কার্ড মেম (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "কার্ডের IO"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "কার্ডের IO_০"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "কার্ডের IO_১"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "আপনার ব্যক্তিগত ফোন নম্বর"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "পরিবেশকের নাম (যেমন provider.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "পরিবেশকের ফোন নম্বর"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "পরিবেশকের DNS ১ (ঐচ্ছিক)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "পরিবেশকের DNS ২ (ঐচ্ছিক)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "ডায়েলের ধরণ"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "সংযোগের গতি"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "সংযোগের টাইমআউট (সেকেন্ডে)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "একাউন্ট লগইন (ইউজারনেম)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "একাউন্ট পাসওয়ার্ড"
-
-# sam: cable?
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr "ক্যাবল: একাউন্ট অপশনসমূহ"
-
-# সাম
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr "BPALogin ব্যবহার করুন (Telstra এর জন্য প্রয়োজন)"
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "কনফিগার করার জন্য নেটওয়ার্কের ইন্টারফেস পছন্দ করুন:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "নেট ডিভাইস"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "বাহ্যিক ISDN মডেম"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "একটি যন্ত্র বেছে নিন!"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN কনফিগারেশন"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "আপনার কি ধরনের কার্ড আছে?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"যদি আপনার একটি ISA কার্ড থাকে, পরবর্তী স্ক্রীণের মানগুলো সঠিক হবে।\n"
-"\n"
-"যদি আপনার একটি PCMCIA কার্ড থাকে, আপনার কার্ডের \"irq\" এবং \"io\" আপনাকে "
-"জানতে হবে।\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "অগ্রসর"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "বাতিল"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "এগুলির মধ্যে কোনটি আপনার ISDN কার্ড?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-"এই মডেমের জন্য একটি CAPI ড্রাইভার আছে। এই CAPI ড্রাইভার  একটি ফ্রি ড্রাইভারের "
-"চেয়ে বেশি সুবিধা দেবে (ফ্যাক্স পাঠানোর মত)। আপনি কোন্‌ ড্রাইভার ব্যবহার করতে চান?"
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "ড্রাইভার"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "আপনি কোন প্রটোকল ব্যবহার করতে চান?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "প্রটোকল"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"আপনার পরিবেশক পছন্দ করুন।\n"
-"যদি তালিকাভূক্ত না থাকে, তাহলে তালিকায় নেই পছন্দ করুন।"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "পরিবেশক:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"এই সিস্টেম আপনার মডেম সাপোর্ট করেনা।\n"
-" http://www.linmodems.org-এ একবার দেখুন"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "কনফিগার করার জন্য মডেম নির্বাচন করুন:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "আপনার মোডেমটি যেই সিরিয়াল পোর্টে সংযুক্ত আছে তা পছন্দ করুন।"
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "আপনার পরিবেশক নির্বাচন করুন:"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "ডায়েলআপ: একাউন্টের অপশন"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "কানেকশনের নাম"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "ফোন নম্বর"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "লগইন আইডি"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "ডায়েলআপ: IP প্যারামিটার"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "IP প্যারামিটারসমূহ"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP ঠিকানাসমূহ"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "সাবনেট মাস্ক"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "ডায়েলআপ: DNS প্যারামিটার"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "ডোমেইন নেম"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "প্রথম DNS সার্ভার (ঐচ্ছিক)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "দ্বিতীয় DNS সার্ভার (ঐচ্ছিক)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "IP থেকে হোস্টনেম সেট করুন"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "গেটওয়ে"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "গেটওয়ে IP ঠিকানা"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "ADSL কনফিগারেশন"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "অনুগ্রহ করে একটি ADSL পরিবেশক পছন্দ করুন"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"আপনার Alcatel-এর microcode প্রয়োজন।\n"
-"আপনি ফ্লপি দিয়ে বা উইন্ডোজ পার্টিশন থেকে এখন এটা সরবরাহ করতে পারেন,\n"
-"বা পরে করার জন্য এখন উপেক্ষা করতে পারেন।"
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "একটি ফ্লপি ব্যবহার করো"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "আমার উইন্ডোজ পার্টিশন ব্যবহার করো"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "এটা পরে করো"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "ফার্মওয়্যার কপি ব্যার্থ হয়োছে, %s ফাইলটি পাওয়া যায়নি"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "ফার্মওয়্যার কপি সফল হয়েছে"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"আপনার Alcatel-এর microcode প্রয়োজন।\n"
-"এটা ডাউনলোড করতে পারবেন এই ঠিকানা থেকে:\n"
-"%s\n"
-"এবং mgmt.o-টি /usr/share/speedtouch-এ কপি করে দিন"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "ভার্চুয়াল পাথ আই-ডি(VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "ভার্চুয়াল সার্কিট আই-ডি(VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "এনক্যাপসুলেশন"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"বাইনারি ড্রাইভার ডিস্ট্রিবিউশন সমস্যার জন্য ECI Hi-Focus মডেম সমর্থন নেই।\n"
-"\n"
-"আপনি http://eciadsl.flashtux.org/ থেকে ড্রাইভার পেতে পারেন"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "আপনি নিজেই একটি ড্রাইভার লোড করান"
-
-# সাম
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr "একটি উইন্ডোজ ড্রাইভার ব্যবহার করুন (ndiswrapper এর সাথে)"
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "%s প্যাকেজটি ইনস্টল করা যায় নি!"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Zeroconf হোস্টের নাম রেজ্যুলুশন"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "%s নেটওয়ার্ক যন্ত্রটি কন্‌ফিগার হচ্ছে (ড্রাইভার %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"অনুগ্রহ করে এই মেশিনের আই-পি কন্‌ফিগারেশন দিন।\n"
-"প্রত্যেক আইটেম একটি আই-পি অ্যাড্রেস হিসেবে dotted-decimal নোটেশনে দিতে \n"
-"হবে (উদাহরণস্বরুপ, 1.2.3.4)"
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "DHCP ঠিকানা থেকে পাওয়া হোস্টের নাম"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "DHCP হোস্টের নাম"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "নেটমাস্ক"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "নেটওয়ার্ক কার্ড আই-ডি ট্র্যাক করো (ল্যাপটপের জন্য ভাল)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "নেটওয়ার্ক Hotplugging"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "বুটের সময় চালু হবে"
-
-# সাম: পরিমাপক বা মেট্রিক (as in metric system)
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "মেট্রিক"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP ক্লায়েন্ট"
-
-# sam
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "DHCP টাইমআউট (সেকেন্ডে)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "DHCP থেকে DNS সার্ভারগুলো দেখাও  "
-
-# সাম
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr "DHCP থেকে YP সার্ভারগুলো দেখাও  "
-
-# সাম
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr "DHCP থেকে NTPD সার্ভারগুলো দেখাও  "
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ঠিকানা 1.2.3.4-এর মত হতে হবে"
-
-# সাম
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "নেটমাস্ক 255.255.224.0 এই ফরম্যাটে হতে হবে"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "নির্দেশ : সাধারনত %s IP ঠিকানাগুলি রিজার্ভ থাকে !"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s ইতিমধ্যেই ব্যবহৃত হচ্ছে\n"
-
-# সাম
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "একটি ndiswrapper ড্রাইভার বেছে নিন"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-# সাম
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr "একটি নতুন ড্রাইভার ইনস্টল করুন"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "কার্ডের ওয়্যারলেস প্যারামিটার প্রবেশ করান"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "কার্যকারিতার ধরন"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Echo request (ping)"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "ব্যবস্থা হয়েছে"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "মাষ্টার"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "রিপিটার"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "মাধ্যমিক"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "সয়ংক্রিয়"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "নেটওয়ার্কের নাম (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "নেটওয়ার্ক ID"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "কার্যকারিতার ফ্রিকুয়েন্সি"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "প্রতিক্রিয়াশীল থ্রেশল্ড"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "বিটরেট (b/s-এ)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-# sam=
-# parameter has been translated as প্যারামিটার
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-"RTS/CTS প্রতিটি প্যাকেট প্রেরণের আগে চ্যানলটি খালি কিনা তা পরীক্ষা করার জন্য একটি "
-"হ্যান্ডশেক যোগ\n"
-"করে। এতে কিছুটা সময় ব্যয় হয় বটে তবে লুকানো নোডসমুহ ও বহুসংখ্যক স্বক্রিয় নোডের ক্ষেত্রে "
-"পারফরম্যান্স\n"
-"বাড়িয়ে দেয়। এ প্যারামিটারটি, একটি সবচেয়ে ছোট প্যাকেট যার জন্য একটি নোড RTS "
-"পাঠায়,\n"
-"তার সাইজ সেট করে, অতএব এখানে সর্বোচ্চ প্যাকেট সাইজের মানটি বসালে এই ব্যবস্থা "
-"নিষ্ক্রিয়\n"
-"হয়ে যায়। আপনি এই প্যারামিটারটি স্বয়ংক্রিয়, নির্ধারিত, বা বন্ধও সেট\n"
-"করতে পারেন।"
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "ফ্রাগমেন্টেশন"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwকন্‌ফিগ কমান্ড অতিরিক্ত আর্গুমেন্ট"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-"এখানে, একজন কিছু তারবিহীন প্যারামিটার কন্‌ফিগার করতে পারে, যেমন:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick ইতিমধ্যেই হোস্টনেম "
-"হিসেবে সেট হয়ে গেছে)।\n"
-"\n"
-"অতিরিক্ত তথ্যের জন্য iwconfig(8) এর ম্যান পেজ দেখুন।"
-
-#  -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwস্পাই কমান্ড অতিরিক্ত আর্গুমেন্ট"
-
-#: network/netconnect.pm:1241
-#, fuzzy, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-"Iwspy  ব্যবহার করা হয় ওয়্যারলেস নেটওয়ার্ক ইন্টারফেসে একটি ঠিকানার\n"
-"তালিকা সেট করা এবং তার প্রতিটির সংযোগ এর মান সংক্রান্ত তথ্য পড়ার জন্য।\n"
-"\n"
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv কমান্ড অতিরিক্ত আর্গুমেন্ট"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"ফ্রিকোয়েন্সির শেষে k, M বা G থাকতে হবে (উদাহরণস্বরুপ,২.৪৬ গিগাহার্জ ফ্রিকোয়েন্সীর "
-"জন্য \"2.46G\"),অথবা অনেকগুলো '0' (শূণ্য) যোগ করুন।"
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"ফ্রিকোয়েন্সির শেষে k, M বা G থাকতে হবে (উদাহরণস্বরুপ,১১M এর জন্য \"11M\"),অথবা "
-"অনেকগুলো '0' (শূণ্য) যোগ করুন।"
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"অনুগ্রহ করে আপনার হোস্টনেম দিন।\n"
-"আপনি হোস্টনেমটি যোগ্যতা-সম্পন্ন হোস্টনেম হওয়া উচিত,\n"
-"যেমন ``mybox.mylab.myco.com''।\n"
-"যদি আপনার কোন গেটওয়ে থাকে তাহলে তার আই-পি অ্যাড্রেস দিন"
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-"শেষ কিন্তু সবচেয়ে ছোট নয় আপনি আপনার ডি-এন-এস সার্ভারের আই-পি অ্যাড্রেসগুলো টাইপ "
-"করে দিতে পারেন।"
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "হোস্টের নাম (ঐচ্ছিক)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "হোস্টের নাম"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "DNS সার্ভার ১"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "DNS সার্ভার ২"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "DNS সার্ভার ৩"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "ডোমেইনের খোঁজ"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr "ডিফল্টভাবে ডোমেইন সন্ধান যোগ্যতা-সম্পন্ন হোস্ট-নেম থেকে নির্দিষ্ত হবে"
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "গেটওয়ে (e.g. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "গেটওয়ে ডিভাইস"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS সার্ভারের ঠিকানা 1.2.3.4-এর মত হতে হবে"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "গেটওয়ে ঠিকানা 1.2.3.4-এর মত হতে হবে"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-"যদি চায়, তাহলে একটি Zeroconf হোস্টনেম দিন।\n"
-"এটি আপনার মেশিনের নাম যা ব্যবহার করে নেটওয়ার্ক যা করে দিতে \n"
-"পারে না সেই রিসোর্স ভাগাভাগিতে সাহায্য করবে।\n"
-"এটি বেশিরভাগ নেটওয়ার্কের ক্ষেত্রে জরুরী নয়।"
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf হোস্টের নাম"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf হোস্টের নামে অবশ্যই a থাকবে না ।"
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"আপনি ইন্টারনেটের সংযুক্তির বিভিন্ন উপায় কন্‌ফিগার করেছেন।\n"
-"যেটি আপনি ব্যবহার করতে চান বেছে নিন।\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "ইন্টারনেট সংযোগ"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "কনফিগারেশন সম্পূর্ন হয়েছে, আপনি কি সেটিংগুলি প্রয়োগ করতে চান?"
-
-# সাম
-# বুট হবার সাথে সাথে
-#: network/netconnect.pm:1439
-#, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "আপনি কি ব্যবহারকারীদের সংযোগ স্থাপন শুরু করতে দিতে চান?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "আপনি কি বুট হবার সাথে সাথে সংযোগ স্থাপন করতে চান?"
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "বুট এর সময় সয়ংক্রিয় ভাবে"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr "সিস্টেম ট্রে'তে নেট অ্যাপলেট ব্যবহার করে"
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr "হাতে হাতে (ইন্টারফেস এখনও বুট হওয়ার সময় সক্রিয় হবে)"
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr "আপনি কিভাবে ডায়াল করে এই সংযোগ স্থাপন করতে চান?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "নোটওয়ার্কের রিষ্টার্টের প্রয়োজন। আপনি কি রি-ষ্টার্ট করতে চান?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "নেটওয়ার্ক কনফিগারেশন"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"নেটওয়ার্ক রি-ষ্টার্ট করার সময় একটি সমস্যা হয়েছে: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "আপনি কি এখন ইন্টার্নেটের সাথে সংযুক্ত হবার চেষ্টা করবেন?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "আপনার কানেকশন পরীক্ষা করা হচ্ছে..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "সিস্টেম এখন ইন্টারনেটে সংযুক্ত হবে।"
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "নিরাপত্তা কারণে, এটা এখন বিচ্ছিন্ন হবে।"
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"সিস্টেম ইন্টারনেটে সংযুক্ত আছে বলে মনে হয় না।\n"
-"আপনার সংযুক্তি পুনরায় কন্‌ফিগার করার চেষ্টা করুন।"
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"অভিনন্দন, নেটওয়ার্ক এবং ইন্টারনেট কন্‌ফিগারেশন শেষ হয়ে গেছে।\n"
-"।\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"এটা হয়ে যাবার পর, আমরা সুপারিশ করি যে হোস্টনেমের সংক্রান্ত সমস্যাগুলো এড়ানোর জন্য "
-"আপনার X এনভায়রনমেন্ট পুনরায় চালু করুন।"
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"কন্‌ফিগারেশনের সময় সমস্যা হয়ে গেছে।\n"
-"net_monitor বা mcc এর মাধ্যমে আপনার সংযুক্ত পরীক্ষা করুন। যদি আপনার সংযুক্তি কাজ না "
-"করে, তাহলে আপনাকে পুনরায় কন্‌ফিগারেশন করতে হবে।"
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"কারণ আপনি একটি নেটওয়ার্ক ইনস্টল করছেন, আপনার নেটওয়ার্ক ইতিমধ্যেই কন্‌ফিগার করা "
-"আছে।\n"
-"কন্‌ফিগারেশন বজায় রাখতে ঠিক আছে'তে ক্লিক করুন, অথবা আপনার ইন্টারনেট এবং নেটওয়ার্ক "
-"সংযুক্তি পুনরায়পুনরায় কন্‌ফিগার করতে বাতিল ক্লিক করুন।\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"একটি অনাকাঙ্খিত ভুল ঘটে গেছে:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "প্রক্সিসমূহের কনফিগারেশন"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP প্রক্সি"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP প্রক্সি"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "প্রক্সি http://..... হওয়া উচিত্‍‌"
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL 'ftp:' অথবা 'http:' দিয়ে শুরু হওয়া উচিত্‍‌"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "ফায়ারওয়াল কন্‌ফিগারেশনের সন্ধান পাওয়া গেছে!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"সাবধান! একটি বিদ্যমান ফায়ারওয়াল কন্‌ফিগারেশনের সন্ধান পাওয়া গেছে। আপনি "
-"ইনস্টলেশনের পর নিজেই কিছু ঠিক করে নিতে পারেন।"
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"অনুগ্রহ করে ইন্টারনেটে সংযুক্ত ইন্টারফেসটির নাম দিন।\n"
-"\n"
-"যেমন:\n"
-"\t\tppp+ মডেম বা ডি-এস-এল সঙযুক্তির জন্য, \n"
-"\t\teth0, বা ক্যাবল সংযুক্তির জন্য eth1, \n"
-"\t\tippp+ একটি isdn সংযুক্তির জন্য।\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "ফ্লপি প্রবেশ করান"
-
-# বহু কথা বলতে হচ্ছে। ব্যবহারকারী হাঁফসে যাবে ;)
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"%s ড্রাইভে FAT ফরম্যাট করা একটি ফ্লপি প্রবেশ করান যার রুট ডিরেক্টরিতে %s আছে এবং %"
-"s চাপুন"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "ফ্লপি ব্যবহার করা যাচ্ছেনা, %s ডিভাইস মাউন্ট করা সম্ভব হয়নি"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "মাউন্ট হয়নি:"
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "এই প্লাটফর্মে এক্সটেনডেড পার্টিশন সাপোর্ট করেনা"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"আপনার পার্টিশন টেবিলে একটি ত্রুটি আছে কিন্তু তা আমি ব্যবহার করতে পারছি না।\n"
-"একমাত্র সমাধান হচ্ছে আপনার প্রাইমারি পার্টিশনের ত্রুটিকে Extended পার্টিশনে সরিয়ে "
-"নেয়া। "
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s ফাইল থেকে পুনরায় সংরক্ষণ করতে ব্যর্থ হয়েছে: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "নষ্ট ব্যাকআপ ফাইল"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "%s ফাইলে লিখতে সমস্যা হয়েছে"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"আপনার ড্রাইভে কোন সমস্যা ঘটেছে। \n"
-"ডাটা পরীক্ষা করার টেস্ট করতে গিয়ে ব্যর্থ হয়েছে। \n"
-"এর মানে হচ্ছে ডিস্কে কোন কিছু লিখতে গেলে তা বিভিন্ন রকম, সমস্যাযুক্ত ডাটায়গিয়ে শেষ "
-"হয়।"
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "অবশ্যই থাকতে হবে"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "জরুরী"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "খুবই সুন্দর"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "সুন্দর"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "হয়তোবা"
-
-# সাম
-#: pkgs.pm:481
-#, c-format
-msgid "Downloading file %s..."
-msgstr "%s ফাইল ডাউনলোড করা হচ্ছে..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(%s -এ)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(এই মেশিনে)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "অন্য মেশিনে কনফিগার করা রয়েছে"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS সার্ভারে \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr "(স্বাভাবিক)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - প্রিন্ট করো, সারিতে রাখবেনা"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - লাইন প্রিন্টার ডেমন"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR নতুন প্রজন্ম"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - সাধারণ ইউনিক্স প্রিন্টিং সিস্টেম"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - সাধারণ ইউনিক্স প্রিন্টিং সিস্টেম (দুরবর্তী সার্ভার)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "দূরবর্তী CUPS সার্ভার"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "অপরিচিত মডেল"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "স্থানীয় প্রিন্টার"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "দূরবর্তী প্রিন্টার"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "দূরবর্তী CUPS সার্ভারে প্রিন্টার"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "দূরবর্তী lpd সার্ভারে প্রিন্টার"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "নেটওয়ার্ক প্রিন্টার (TCP/Socket)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/উইন্ডোজ 95/98/NT সার্ভারে প্রিন্টার"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "NetWare সার্ভারে প্রিন্টার"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "প্রিন্টার যন্ত্রের ইউ-আর-আই লিখুন"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "একটি কমান্ডে পাইপ (pipe) কাজ(job)"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "পরামর্শ দেওয়া হচ্ছে"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "অপরিচিত মডেল"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "এই মেশিনে কনফিগার করা রয়েছে"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr "%s নম্বর প্যারালাল পোর্টে"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", ইউএসবি প্রিন্টার #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", ইউএসবি প্রিন্টার"
-
-# sam
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", প্যারালাল পোর্টে HP প্রিন্টার"
-
-# sam
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", USB পোর্টে HP প্রিন্টার"
-
-# sam
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", HP JetDirect এ HP প্রিন্টার"
-
-# sam
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", HP প্রিন্টার"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", %s নম্বর প্যারালাল পোর্টে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", প্যারালাল পোর্টে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", ইউএসবি-তে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", HP JetDirect-এ বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", প্রিন্টসমূহ %s-এ"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " \"%s\" LPD সার্ভারে, \"%s\" প্রিন্টার"
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", \"%s\" টিসিপি/আই-পি হোস্ট, %s পোর্ট"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " \"%s\" SMB/উইন্ডোজ সার্ভারে, \"%s\" ভাগাভাগি"
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " \"%s\" নোভেল সার্ভারে, \"%s\" প্রিন্টার"
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", %s কমান্ড ব্যবহার করছে"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "প্যারালাল পোর্ট #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "ইউএসবি প্রিন্টার #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "ইউএসবি প্রিন্টার"
-
-# sam
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "প্যারালাল পোর্টে HP প্রিন্টার"
-
-# sam
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "USB পোর্টে HP প্রিন্টার"
-
-# sam
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "HP JetDirect এ HP প্রিন্টার"
-
-# sam
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "HP প্রিন্টার"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "%s নম্বর প্যারালাল পোর্টে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "প্যারালাল পোর্টে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "ইউএসবি-তে বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "HP JetDirect-এ বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "বিবিধ ক্ষমতা সম্পন্ন ডিভাইস"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "প্রিন্টসমূহ %s-এ"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "\"%s\" LPD সার্ভার, \"%s\" প্রিন্টার"
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "\"%s\" টিসিপি/আই-পি হোস্ট, %s পোর্ট"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "\"%s\" SMB/উইন্ডোজ সার্ভার, \"%s\" ভাগাভাগি"
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "\"%s\" নোভেল সার্ভার, \"%s\" প্রিন্টার"
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "ব্যবহারকারীদের কমান্ড %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Raw প্রিন্টার (কোন ড্রাইভার ছাড়া)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "লোকাল নেটওয়ার্ক(সমূহ)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "ইন্টার্ফেস \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "নেটওয়ার্ক %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "হোস্ট %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (পোর্ট %s)"
-
-# সাম:
-# self-extracting?
-# decompress?
-# = লিপি
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"HP LaserJet ১০০০ চালু করার পর এর ফার্মওয়্যার আপলোড করা প্রয়োজন। HP ওয়েব সাইট "
-"থেকে উইন্ডোজ ড্রাইভার প্যাকেজটি ডাউনলোড করুন (প্রিন্টারের CD র ফার্মওয়্যারটি অকেজো)। "
-"ফার্মওয়্যার ফাইলটি বের করতে, self-extracting '.exe' ফাইলটি 'unzip' ইউটিলিটি "
-"দিয়ে ডিকম্প্রেস করুন এবং 'sihp1000.img' ফাইলটি খুঁজে বের করুন। তারপর এ ফাইলটি '/"
-"etc/printer' ডিরেক্টরিতে কপি করুন। সেখানে একটি স্বয়ংক্রিয় আপলোডার স্ক্রিপ্ট দ্বারা "
-"এটি চিহ্নিত হবে এবং আপলোড হয়ে যাবে যখনি প্রিন্টারটি চালু এবং সংযুক্ত করা হয়।\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "CUPS প্রিন্টার কনফিগারেশন"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"এখানে এই মেশিনে যুক্ত প্রিন্টারগুলো রিমোট মেশিন কর্তৃক যার মাধ্যমে রিমোট মেশিন কর্তৃক "
-"ব্যবহার করা যাবে কিনা বেছে নিতে পারেন।"
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"এখানে আপনি সিদ্ধান্ত নিতে পারেন যে রিমোট মেশিনের প্রিন্টারগুলো এই মেশিন থেকে "
-"স্বয়ংক্রিয়ভাবে পাওয়া যাবে কিনা।"
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "এই মেশিনের প্রিন্টারগুলো অন্যান্য কম্পিউটার থেকে পাওয়া যাবে"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "রিমোট মেশিনে প্রাপ্ত প্রিন্টারগুলো স্বয়ংক্রিয়ভাবে খুজে বের করবে"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "হোস্ট/নেটওয়ার্কে প্রিন্টার ভাগাভাগি: "
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "হাতে হাতে কনফিগারেশন"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "দূরবর্তী কোন মেশিন নেই"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "অতিরিক্ত CUPS সার্ভার: "
-
-# সাম
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"আপনার স্থানীয় নেটওয়ার্কে অবস্থিত রিমোট CUPS সার্ভারের প্রিন্টারগুলোতে প্রবেশাধিকারের "
-"জন্য \"রিমোট মেশিনে প্রাপ্ত প্রিন্টারগুলো স্বয়ংক্রিয়ভাবে খুজে বের করবে\" অপশনটি চালু "
-"করতে হবে; নিজস্ব প্রিন্টারগুলো সম্বন্ধে CUPS সার্ভারগুলো আপনার মেশিনকে স্বয়ংক্রিয়ভাবে "
-"অবহিত করবে। আপনার মেশিনে বর্তমানে চিহ্নিত সব  প্রিন্টার, Printerdrake মূল উইন্ডোর "
-"\"রিমোট প্রিন্টারসমূহ\" অংশে তালিকাভুক্ত আছে। যদি আপনার CUPS সার্ভার(সমূহ) আপনার "
-"স্থানীয় নেটওয়ার্কে অবস্থিত না হয়, আপনাকে সার্ভার(সমূহ) থেকে প্রিন্টার সম্পর্কীয় তথ্য "
-"পেতে হলে IP অ্যাড্রেস এবং চাইলে পোর্ট নাম্বার  দিতে হবে।"
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "জাপানী টেক্সট ছাপানোর মোড"
-
-# সাম
-# accentuate = d ঝোঁক‌-চিহ্ন সম্বলিত 
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"এটি চালু করলে আপনি জাপানী ভাষায় সাধারন টেক্সট ফাইল প্রিন্ট করতে পারবেন। এই "
-"ফাংশানটি শুধুমাত্র জাপানী অক্ষরে টেক্সট প্রিন্ট করতে ব্যবহার করুন, কারন এটি সক্রিয় "
-"থাকলে আপনি ঝোঁক‌-চিহ্ন সম্বলিত ল্যাটিন  অক্ষরসমূহ প্রিন্ট করতে পারবেন না এবং মার্জিন, "
-"অক্ষরের সাইজ ইত্যাদি বদলাতে পারবেন না। এই সেটিংটি শুধুমাত্র এই মেশিনে কনফিগারকৃত "
-"প্রিন্টারের ক্ষেত্রে প্রযোজ্য। আপনি যদি একটি রিমেট মেশিনে সেটআপ করা প্রিন্টার দিয়ে "
-"জাপানী অক্ষর প্রিন্ট করতে চান তবে আপনাকে সেই রিমেট মেশিনে এ ফাংশানটি সক্রিয় করতে "
-"হবে।"
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "CUPS কন্‌ফিগারেশনে স্বয়ংক্রিয় শুদ্ধতা"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr "রিমোট CUPS সার্ভার এবং কোন স্থানীয় CUPS daemon নেই"
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "চালু"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "বন্ধ"
-
-# সাম: এই ফাইল এ daemon এর কয়েকটা অনুবাদ:
-# ডেমন daemon  ড্যেমন ডেইমন ডেমন্‌ .... 
-# i am lost! :D
-#   
-# correct translation of 'print queues'?
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"এই মোডে স্থানীয় CUPS daemon বন্ধ করে দেয়া হবে এবং সব প্রিন্ট অনুরোধ সরাসরি "
-"নিম্নল্লেখিত সার্ভারে যাবে। দ্রষ্টব্য: এই সময়ে স্থানীয় প্রিন্ট সারি নির্দিষ্ট করার কোন "
-"ব্যবস্থা নেই এবং যদি উল্লেখিত সার্ভার নিষ্ক্রিয় থাকে তবে এই মেশিন থেকে প্রিন্ট সম্ভব "
-"হবে না।"
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "লোকাল প্রিন্টারের শেয়ারিং"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr "এই মেশিনগুলোতে এবং নেটওয়ার্কে স্থানীয়ভাবে সংযুক্ত প্রিন্টারনেট"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "হোস্ট/নেটওয়ার্ক যোগ করো"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "নির্বাচিত হোস্ট/নেটওয়ার্ক সম্পদনা করেন"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "নির্বাচিত হোস্ট/নেটওয়ার্ক মুছে ফেলুন"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "হোস্ট/নেটওয়ার্কের IP ঠিকানা"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "যেখানে স্থানীয় প্রিন্টারগুলো সহজে পাওয়া যায় সেইনেটওয়ার্ক বা হোস্ট বেছে নিন:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "হোস্ট/নেটওয়ার্ক আই-পি অ্যাড্রেস হারিয়ে গেছে।"
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "এখানে দেয়া হোস্ট/নেটওয়ার্ক আই-পি সঠিক নয়।\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "সঠিক IP সমুহের নমুনা:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "এই হোস্ট/নেটওয়ার্ক ইতিমধ্যেই তালিকায় আছে, পুনরায় যুক্ত করা যাবে না।\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "রিমোট CUPS সার্ভার দিয়ে প্রিন্টারে প্রবেশ"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"আপনি যেই প্রিন্টারটি ব্হব্যবহার করতে চান তা CUPS সার্ভারে যুক্ত করুন। আপনাকে শুধু এটি "
-"করতে হবে যদি সার্ভার তাদের প্রিন্টারের তথ্য স্থানীয় নেটওয়ার্কে ছড়িয়ে না দেয়।"
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "সার্ভার যোগ করো"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "নির্বাচিত সার্ভারটি সম্পাদিত করো"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "নির্বাচিত সার্ভারটি মুছে ফেলো"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"যেই সার্ভারের প্রিন্টার আপনি ব্যবহার করতে চান তার IP ঠিকানা এবং পোর্ট প্রবেশ করান।"
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "কোন পোর্ট না দেয়া হলে, স্বাভাবিক ভাবে ৬৩১ ব্যবহার করা হবে।"
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "সার্ভারের IP নেই!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "IP টি সঠিক নয়।\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "পোর্ট নম্বর একটি সংখ্যা হতে হবে!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "এই সার্ভারটি ইতিমধ্যেই তালিকায় উপস্হিত, একে আবার যোগ করা যাবে নাহ্।\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "পোর্ট"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "দূরবর্তী সার্ভারের নাম অথবা IP"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "CUPS সার্ভার নাম বা IP অ্যাড্রেস হারিয়ে গেছে।"
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "প্রিন্টার তথ্য পড়া হচ্ছে..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "CUPS পুনরায় আরম্ভ করছি..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "প্রিন্টারের সংযোগ নির্বাচন করুন"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "প্রিন্টারটি কিভাবে সংযুক্ত আছে?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"রিমোট CUPS সার্ভারের প্রিন্টারগুলো এখানে কন্‌ফিগার করার দরকার নেই; এই প্রিন্টারগুলো "
-"স্বয়ংক্রিয়ভাবে চিহ্নিত হবে।"
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"সাবধানতা: কোন স্থানীয় নেটওয়ার্ক সংযুক্তি সক্রিয় নেই, রিমোট প্রিন্টার চিহ্নিত করা "
-"হয়নি বা পরীক্ষা করা হয়নি!"
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-"প্রিন্টার স্বয়ংক্রিয়-চিহ্নিত (স্থানীয়, টিসিপি/সকেট, এস-এম-বি প্রিন্টার, এবং যন্ত্রের "
-"URI)"
-
-# সাম
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr "নেটওয়ার্ক প্রিন্টার স্বয়ংক্রিয়‌-সনাক্তকরণের টাইমআউট পরিবর্তন কর"
-
-# সাম
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr "এখানে নেটওয়ার্ক প্রিন্টার স্বয়ংক্রিয়‌-সনাক্তকরণের টাইমআউট (মিলিসেকেন্ডে) দিন।"
-
-# সাম
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-"আপনি যত বেশী টাইমআউট দেবেন, নেটওয়ার্ক প্রিন্টার সনাক্তকরণ তত নির্ভরযোগ্য হবে। তবে "
-"তখন স্ক্যান করতে সময় বেশী লাগবে, বিশেষ করে যদি নেটওয়ার্কে স্থানীয় ফায়ারওয়াল "
-"সম্বলিত অনেক মেশিন থাকে। "
-
-# সাম: 
-# not sure if positive interger = প্রকৃত সংখ্যা...check out
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "টাইমআউট একটি ধনাত্মক প্রকৃত সংখ্যা হতে হবে!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "আপনার সিস্টেম নিরীক্ষা করা হচ্ছে..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "এবং একটি অপরিচিত প্রিন্টার"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "এবং %d অজানা প্রিন্টারসমূহ"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"নিম্নলিখিত প্রিন্টারগুলো\n"
-"\n"
-"%s%s\n"
-"আপনার সিস্টেমে সরাসরি সংযুক্ত আছে"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"নিম্নলিখিত প্রিন্টারটি\n"
-"\n"
-"%s%s\n"
-"আপনার সিস্টেমে সরাসরি সংযুক্ত আছে"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"নিম্নলিখিত প্রিন্টারটি\n"
-"\n"
-"%s%s\n"
-"আপনার সিস্টেমে সরাসরি সংযুক্ত আছে"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"আপনার সিস্টেমে সরাসরি যুক্ত একটি অজানা প্রিন্টার আছে"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"আপনার সিস্টেমে সরাসরি যুক্ত %d টি অজানা প্রিন্টার আছে"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "আপনার সিস্টেমে সরাসরি যুক্ত কোন প্রিন্টার পাওয়া যায়নি"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (নিশ্চিত হোন যে আপনার সবগুলো প্রিন্টার সংযুক্ত এবং অন করা আছে)।\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"আপনি কি উপরে দেয়া প্রিন্টারগুলো থেকে অথবা স্থানীয় নেটওয়ার্কের প্রিন্টারগুলোকে "
-"ছাপানোর জন্য সক্রিয় করে রাখতে চান?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"আপনি কি স্থানীয় নেটওয়ার্কের প্রিন্টারগুলোকে ছাপানোর জন্য সক্রিয় করে রাখতে চান?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "আপনি কি উপরে দেয়া প্রিন্টারগুলোকে ছাপানোর জন্য সক্রিয় করে রাখতে চান?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "আপনি কি নিশ্চিত যে আপনি এই মেশিনে প্রিন্টিং সেটআপ করতে চান?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"নোট: প্রিন্টার মডেল এবং প্রিন্টিং সিস্টেমের উপর নির্ভর করে %d মেগাবাইট অতিরিক্ত "
-"সফ্‌টওয়্যার ইনস্টল হবে।"
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "নতুন প্রিন্টার খোঁজা হচ্ছে..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "%s এ প্রিন্টার পাওয়া গেছে ..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " -এ"
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "প্রিন্টার মডেল নির্বাচন"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "আপনার কোন প্রিন্টার মডেল আছে?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"আপনার %s প্রিন্টারটি কোন মডেলের Printerdrake তা বুঝতে পারছে না। অনুগ্রহ করে "
-"তালিকা থেকে সঠিক মডেল বেছে নিন।"
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"যদি আপনার প্রিন্টার তালিকায় না থাকে, কাছাকাছি রকমের (প্রিন্টার ম্যানুয়াল দেখুন) "
-"অথবা একই ধরণের একটি বেছে নিন।"
-
-# সাম:  প্রিন্টার ?
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "%s এ প্রিন্টার কনফিগার করা হচ্ছে..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "\"%s\" প্রিন্টার কনফিগার করা হচ্ছে..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "একটি নতুন প্রিন্টার যোগ করো"
-
-# সাম
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n"
-"\n"
-"এ উইজার্ড আপনাকে যেকোন স্থানীয় বা দুরবর্তী প্রিন্টার যা কিনা এই মেশিন বা নেটওয়ার্কে "
-"অবস্থিত অনান্য মেশিনে ব্যবহৃত হবে, তা ইনস্টল করতে সাহায্য করবে।\n"
-"\n"
-"উইজার্ডটি আপনাকে প্রিন্টার সেটআপ করতে প্রয়োজনীয় সব তথ্য অনুরোধ করবে এবং আপনাকে "
-"প্রিন্টার ড্রাইভার, ড্রাইভার অপশনসমূহ এবং প্রিন্টার সংযোগের ধরন, এসব অপশন বেছে "
-"নেয়ার সুযোগ দেবে।"
-
-# সাম
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n"
-"\n"
-"এ উইজার্ডটি আপনার কম্পিউটারে বা সরাসরি নেটওয়ার্কে বা কোন দুরবর্তী উইন্ডোজ মেশিনে "
-"সংযুক্ত প্রিন্টার(সমূহ) ইনস্টল করতে সাহায্য করবে।\n"
-"\n"
-"এই মেশিনে যদি কোন প্রিন্টার থেকে থাকে অনুগ্রহ করে তা প্লাগ ইন করুন এবং চালু করুন "
-"যাতে স্বয়ংক্রিয়ভাবে সনাক্তকৃত হতে পারে। আপনার নেটওয়ার্ক প্রিন্টার ও উইন্ডোজ "
-"মেশিনেগুলোও সংযুক্ত ও চালু থাকতে হবে।\n"
-"\n"
-"মনে রাখবেন, নেটওয়ার্ক প্রিন্টারগলো সনাক্ত করতে সরাসরি সংযুক্ত প্রিন্টারগলোর চাইতে "
-"তুলনামূলকভাবে বেশী সময় লাগে। অতএব, যখন প্রয়োজন না হলে নেটওয়ার্ক এবং/অথবা উইন্ডোজ "
-"হোষ্টকৃত প্রিন্টারগলোর স্বয়ংক্রিয় সনাক্তকরন বন্ধ রাখুন।\n"
-"\n"
-" আপনি প্রস্তুত হলে \"পরবর্তী\" ক্লিক করুন, এবং \"বাতিল\" চাপুন যদি আপনি এখন কোন "
-"প্রিন্টার সেটআপ করতে না চান।"
-
-# সাম
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n"
-"\n"
-"এ উইজার্ডটি আপনার কম্পিউটারে সংযুক্ত প্রিন্টার(সমূহ) ইনস্টল করতে সাহায্য করবে।\n"
-"\n"
-"এই মেশিনে সংযুক্ত সব প্রিন্টার প্লাগ ইন করুন এবং চালু করুন যাতে স্বয়ংক্রিয়ভাবে সনাক্তকৃত "
-"হতে পারে।\n"
-"\n"
-" আপনি প্রস্তুত হলে \"পরবর্তী\" ক্লিক করুন, এবং \"বাতিল\" চাপুন যদি আপনি এখন কোন "
-"প্রিন্টার সেটআপ করতে না চান।"
-
-# সাম
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n"
-"\n"
-"এ উইজার্ডটি আপনার কম্পিউটারে বা সরাসরি নেটওয়ার্কে সংযুক্ত প্রিন্টার(সমূহ) ইনস্টল করতে "
-"সাহায্য করবে।\n"
-"\n"
-"এই মেশিনে যদি কোন প্রিন্টার থেকে থাকে অনুগ্রহ করে তা প্লাগ ইন করুন এবং চালু করুন "
-"যাতে স্বয়ংক্রিয়ভাবে সনাক্তকৃত হতে পারে। আপনার নেটওয়ার্ক প্রিন্টারগলোও সংযুক্ত ও চালু "
-"থাকতে হবে।\n"
-"\n"
-"মনে রাখবেন, নেটওয়ার্ক প্রিন্টারগলো সনাক্ত করতে সরাসরি সংযুক্ত প্রিন্টারগলোর চাইতে "
-"তুলনামূলকভাবে বেশী সময় লাগে। অতএব, যখন প্রয়োজন না হলে নেটওয়ার্ক প্রিন্টারগলোর "
-"স্বয়ংক্রিয় সনাক্তকরন বন্ধ রাখুন।\n"
-"\n"
-" আপনি প্রস্তুত হলে \"পরবর্তী\" ক্লিক করুন, এবং \"বাতিল\" চাপুন যদি আপনি এখন কোন "
-"প্রিন্টার সেটআপ করতে না চান।"
-
-# সাম
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"প্রিন্টার সেটআপ উইজার্ডে আপনাকে স্বাগতম!\n"
-"\n"
-"এ উইজার্ডটি আপনার কম্পিউটারে সংযুক্ত প্রিন্টার(সমূহ) ইনস্টল করতে সাহায্য করবে।\n"
-"\n"
-"এই মেশিনে যদি কোন প্রিন্টার থেকে থাকে অনুগ্রহ করে তা প্লাগ ইন করুন এবং চালু করুন "
-"যাতে স্বয়ংক্রিয়ভাবে সনাক্তকৃত হতে পারে।\n"
-"\n"
-" আপনি প্রস্তুত হলে \"পরবর্তী\" ক্লিক করুন, এবং \"বাতিল\" চাপুন যদি আপনি এখন কোন "
-"প্রিন্টার সেটআপ করতে না চান।"
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "এই মেশিনের সাথে সংযুক্ত প্রিন্টারসমূহ সয়ংক্রিয়ভাবে সনাক্ত করো"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "লোকাল নেটওয়ার্কের সাথে সরাসরি সংযুক্ত প্রিন্টারসমূহ সয়ংক্রিয়ভাবে সনাক্ত করো"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "উইন্ডোজ চালিত মেশিনের সাথে সংযুক্ত প্রিন্টারসমূহ সয়ংক্রিয়ভাবে সনাক্ত করো"
-
-# সাম
-#: printer/printerdrake.pm:1151
-#, c-format
-msgid "No auto-detection"
-msgstr "কোন স্বয়ংক্রিয় সনাক্তকরণ নয়"
-
-# সাম
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"অভিনন্দন, আপনার প্রিন্টারের ইনস্টলেশন ও কনফিগারেশন দুটোই শেষ!\n"
-"\n"
-"আপনি আপনার অ্যাপ্লিকেশনের \"প্রিন্ট\" কমান্ড দিয়ে প্রিন্ট করতে পারেন (সাধারণত \"ফইল"
-"\" মেনুতে অবস্থিত)।\n"
-"\n"
-"আপনি যদি প্রিন্টার যোগ করতে, সরাতে বা নাম বদলাতে চান, বা যদি ডিফল্ট অপশন "
-"সেটিংসমূহ (কাগজ দেবার ট্রে, মুদ্রনের মান, ...) বদলাতে চান, তবে তা %s নিয়ন্ত্রণ "
-"কেন্দ্র \"হার্ডওয়্যার\" বিভাগে \"প্রিন্টার\" থেকে করুন।"
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "%s প্যাকেজগুলি ইনস্টল করা গেলোনা!"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr "উইন্ডেজ/SMB সার্ভার সয়ং-সনাক্ত উপেক্ষা করা হচ্ছে"
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "প্রিন্টার সংয়-সনাক্তকরণ"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "ডিভাইস সমূহ সনাক্ত করা হচ্ছে..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", নেটওয়ার্ক প্রিন্টার \"%s\", পোর্ট %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", এসএমবি/উইন্ডোজ সার্ভার \"%2$s\" এর প্রিন্টার \"%1$s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "%s সনাক্ত হয়েছে"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "প্যারালাল পোর্ট #%s এর প্রিন্টার"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "নেটওয়ার্ক প্রিন্টার \"%s\", পোর্ট %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "এসএমবি/উইন্ডোজ সার্ভার \"%2$s\" এর প্রিন্টার \"%1$s\""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "লোকাল প্রিন্টার"
-
-# সাম: Parallel Port translated as প্যারালাল পোর্ট at some place. 
-# this string has other occurances:  
-# (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"কোন স্থানীয় প্রিন্টার পাওয়া যায়নি! নিজ হাতে ইনস্টল করতে চাইলে ইনপুট লাইনে "
-"(প্যারালাল পোর্ট: /dev/lp0, /dev/lp1, ..., যা কিনা LPT1:, LPT2:, ..., এর "
-"সমতুল্য; ১ম ইউএসবি প্রিন্টার: /dev/usb/lp0, ২য় ইউএসবি প্রিন্টার: /dev/usb/"
-"lp1, ...) ডিভাইস নাম/ফাইল নাম উল্লেখ করুন।"
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "আপনাকে অবশ্যই একটি ডিভাইস অথবা ফাইলের নাম প্রবেশ করাতে হবে!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "কোন প্রিন্টার পাওয়া যায়নি!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "লোকাল প্রিন্টারসমূহ"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "উপস্থিত প্রিন্টারসমূহ"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "নিম্নোক্ত প্রিন্টারগুলি সংয়-সনাক্ত হয়েছে।"
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"আপনি যেটি কন্‌ফিগার করতে চাচ্ছেন যদি এটা তা না হয়, তাহলে যন্ত্রের নাম/ফাইলের নাম "
-"ইনপুট লাইনে দিন"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"অদলবদলকরে, আপনি ইনপুট লাইনে যন্ত্রের নাম/ফাইলের নাম নির্দিষ্ট করে দিতে পারেন"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "এখানে সয়ং-নির্ধারিত প্রিন্টারগুলির একটি লিষ্ট।"
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"অনুগ্রহ করে যেই প্রিন্টারটি আপনি সেট-আপ করতে চান তা বেছে নিন অথবা ইনপুট লাইনে "
-"যন্ত্রের নাম/ফাইলের নাম দিন"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"অনুগ্রহ করে যেই প্রিন্টারটি আপনি প্রিন্ট করার কাজে ব্যবহার করতে চান তা বেছে নিন "
-"অথবা ইনপুট লাইনে যন্ত্রের নাম/ফাইলের নাম দিন"
-
-# sam: printer
-# Manual configuration has been translated as "হাতে হাতে কনফিগারেশন" but is it appropriate as an option? 
-# I mean should the option \"Manual configuration\" be translated that way?  
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"প্রিন্টার কনফিগারেশন সম্পূর্ন স্বয়ংক্রীয়ভাবে কাজ করবে। যদি আপনার প্রিন্টারটি সঠিকভাবে "
-"সনাক্ত না হয় অথবা আপনি যদি নিজ হাতে কনফিগারেশন করতে চান, তাহলে \"স্বনির্বাচিত "
-"কনফিগারেশন\" চালু করুন। "
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "এখন কোন বিকল্প সম্ভাবনা নেই।"
-
-# সাম: printer Manual configuration
-# there is a similar one...
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"যে প্রিন্টারটি সেটআপ করতে চান সেটি বাছাই করুন। প্রিন্টার কনফিগারেশন সম্পূর্ন "
-"স্বয়ংক্রীয়ভাবে কাজ করবে। যদি আপনার প্রিন্টারটি সঠিকভাবে সনাক্ত না হয় অথবা আপনি "
-"যদি নিজ হাতে কনফিগারেশন করতে চান, তাহলে \"স্বনির্বাচিত কনফিগারেশন\" চালু করুন।"
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "অনুগ্রহ করে একটি প্রিন্টার পছন্দ করুন যেখানে আপনার প্রিন্টের কাজগুলি যাবে।"
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"অনুগ্রহ করে যেই পোর্টে আপনার প্রিন্টারটি যুক্ত তা বেছে নিন অথবা ইনপুট লাইনে যন্ত্রের "
-"নাম/ফাইলের নাম দিন"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "আপনার প্রিন্টারটি যে পোর্টে সংযুক্ত আছে তা পছন্দ করুন।"
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (প্যারালাল পোর্ট: /dev/lp0, /dev/lp1, ..., সদৃশ LPT1:, LPT2:, ..., প্রথম ইউএসবি "
-"প্রিন্টার: /dev/usb/lp0, দ্বিতীয় ইউএসবি প্রিন্টার: /dev/usb/lp1, ...)।"
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "আপনাকে অবশ্যই একটি প্রিন্টার/ডিভাইস পছন্দ/প্রবেশ করাতে হবে!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "বের হয়ে যাচ্ছে"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "lpd প্রিন্টারের রিমোট অপশন"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"দূরবর্তী lpd প্রিন্টার ব্যবহার করতে, আপনাকে সেই সার্ভারে প্রিন্টার সার্ভারের হোস্টনাম "
-"এবং প্রিন্টারের নাম দিতে হবে।"
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "দূরবর্তী হোস্টের নাম"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "দূরবর্তী প্রিন্টারের নাম"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "দূরবর্তী হোস্টের নাম নেই!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "দূরবর্তী প্রিন্টারের নাম নেই!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "তথ্য"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "সনাক্তকৃত মডেল: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "নেটওয়ার্ক স্ক্যান করা হচ্ছে..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ",সার্ভার \"%2$s\"-এ অবস্থিত প্রিন্টার \"%1$s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "সার্ভার \"%2$s\"-এ অবস্থিত প্রিন্টার \"%1$s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "এস.এম.বি. (উইন্ডোজ ৯x/এন.টি.) প্রিন্টার সংক্রান্ত অপশন"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"এস.এম.বি. প্রিন্টারে প্রিন্ট করতে হলে আপনাকে এস.এম.বি. হোস্ট-নাম (লক্ষ করুন! এই নাম "
-"টি.সি.পি./আই.পি. হোস্ট-নাম হতে ভিন্ন হতে পারে!) এবং হয়তো প্রিন্ট সার্ভারের আই.পি. "
-"ঠিকানাও উল্লেখ করতে হবে; পাশাপাশি প্রিন্টারের শেয়ার নাম এবং প্রয়োজন হলে "
-"ব্যবহারকারীর-নাম, পাসওয়ার্ড ও ওয়ার্কগ্রুপ বিষয়ক তথ্যও প্রদান করতে হবে।"
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"প্রিন্টারটি যদি স্বয়ংক্রিয়ভাবে সনাক্ত করা হয়ে থাকে, তবে তালিকা থেকে শুধু প্রিন্টারটি "
-"বেছে নিন ও তারপর ব্যবহারকারীর-নাম, পাসওয়ার্ড, এবং/অথবা প্রয়োজনবোধে ওয়ার্কগ্রুপ যোগ "
-"করুন।"
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "এস.এম.বি. সার্ভার হোস্ট"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "এস.এম.বি. সার্ভার আই.পি."
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "শেয়ারের নাম"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "ওয়ার্কগ্রুপ"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "স্বয়ংক্রিয়ভাবে সনাক্তকৃত"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "সার্ভারের নাম অথবা আই.পি. অবশ্যই প্রদান করতে হবে!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "সাম্বা শেয়ারের নাম নেই!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "নিরাপত্তাজনিত সতর্কবার্তা"
-
-# FIXME
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"আপনি পাসওয়ার্ড ব্যবহার করে উইন্ডোজ অ্যাকাউন্টে প্রিন্ট ব্যবস্থা স্থাপন করতে যাচ্ছেন।  "
-"সাম্বা ক্লায়েন্ট সফটওয়ারের একটি ত্রুটির কারণে উইন্ডোজ সার্ভারকে যে পাসওয়ার্ড পাঠানো "
-"হয়, তা কমান্ড লাইন থেকে লিখতে হয়।  ফলে \"ps auxwww\" কমান্ড ব্যবহার করে "
-"সিস্টেমের যে কোন ব্যবহারকারী উক্ত পাসওয়ার্ড দেখতে পারেন।\n"
-"\n"
-"আমরা তাই নিম্নোক্ত যে কোন একটি বিকল্প ব্যবস্থা ব্যবহারের পরামর্শ দিচ্ছি (প্রতিটি "
-"ক্ষেত্রেই আপনাকে নিশ্চিত হতে হবে যে, শুধুমাত্র স্থানীয় নেটওয়ার্কের সাথে যুক্ত "
-"কম্পিউটারগুলোই কেবল উইন্ডোজ সার্ভারকে ব্যবহার করতে পারে, উদাহরণস্বরূপ, ফায়ারওয়াল "
-"ব্যবহার করে আপনি এটি করতে পারেন):\n"
-"\n"
-"\"GUEST\" অ্যাকাউন্টের মত উইন্ডোজ সার্ভারে পাসওয়ার্ড-বিহীন একটি অ্যাকাউন্ট ব্যবহার "
-"করুন কিংবা প্রিন্টিং এর জন্য একটি বিশেষ অ্যাকাউন্ট রাখুন।  ব্যক্তিগত অ্যাকাউন্ট বা "
-"অ্যাডমিনিস্ট্রেটর অ্যাকাউন্টের পাসওয়ার্ড অপসারণ করবেন না।\n"
-"\n"
-"আপনার উইন্ডোজ সার্ভারকে এল.পি.ডি. প্রোটোকল ব্যবহারের জন্য প্রস্তুত রাখুন।  এরপর \"%s"
-"\" সংযোগের ধরন সহ প্রিন্টড্রেক ব্যবহার করে এই কম্পিউটার থেকেই প্রিন্টিং ব্যবস্থা "
-"স্থাপন করুন।\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"IPP প্রোটোকলের নিয়ন্ত্রণে প্রিন্টারকে পাওয়ার জন্য আপনার উইন্ডোজ সার্ভার সেট-আপ করুন "
-"এবং এই মেশিন থেকে Printerdrake এ \"%s\" সংযুক্তি ধরণ থেকে প্রিন্টিং সেট-আপ করুন।\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"প্রিন্টারটিকে একটি লিনাক্স সার্ভারের সাথে সংযুক্ত করুন এবং  আপনার উইন্ডোজ চালিত "
-"কম্পিউটারগুলোকে উক্ত সার্ভারের সাথে ক্লায়েন্ট হিসেবে যুক্ত হতে দিন।\n"
-"\n"
-"এখন যে ভাবে করছেন, সেভাবেই কি আপনি প্রিন্টারটির সেট-আপ প্রক্রিয়া চালিয়ে যেতে চান?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "নেটওয়ার প্রিন্টার অপশন"
-
-# সাম: 'user name' is wrongly translated at many places as 'ইউজার নেম'।
-# should be 'ব্যবহারকারীর নাম'
-# TCP/IP?
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"NetWare প্রিন্টারটি ব্যবহার করার জন্য আপনাকে NetWare প্রিন্ট সার্ভারের নাম সরবরাহ "
-"করতে হবে। (লক্ষ করুন! এই নাম টিসিপি/আইপি হোস্ট নাম থেকে ভিন্ন হতে পারে!) আপনাকে "
-"আরও উল্লেখ করতে হবে ব্যবহৃত প্রিন্টারটির অপেক্ষমান প্রিন্ট তালিকার নাম ও প্রয়োজন হলে "
-"ব্যবহারকারীর নাম ও পাসওয়ার্ড।"
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "প্রিন্টার সার্ভার"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "অপেক্ষমান প্রিন্ট তালিকার (Queue) নাম"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "এন.সি.পি. সার্ভারের নাম নেই!"
-
-# FIXME
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "এন.সি.পি. অপেক্ষমান প্রিন্ট তালিকার (Queue) নাম নেই!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", হোস্ট \"%s\", পোর্ট %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "হোস্ট \"%s\", পোর্ট %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "টি.সি.পি./সকেট প্রিন্টার অপশন"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"তালিকা থেকে স্বয়ংক্রিয়ভাবে চিহ্নিত প্রিন্টারগুলো থেকে একটি বেছে নিন অথবা ইনপুট "
-"ফিল্ডে হোস্টনাম বা আই-পি এবং ঐচ্ছিক পোর্ট সংখ্যা (ডিফল্ট হচ্ছে 9100) দিন।"
-
-# sam: TCP = টিসিপি নাকি TCP?
-# check throughout the file.
-# in the commonwords.po hardware translation spelling is wrong.
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"TCP বা সকেট প্রিন্টারে প্রিন্ট করতে চাইলে আপনাকে হোস্টের নাম অথবা প্রিন্টারের IP "
-"এবং চাইলে পোর্ট নাম্বার (ডিফল্ট 9100) উল্লেখ করতে হবে। HP JetDirect সার্ভারগুলোতে "
-"পোর্ট নাম্বার সাধারনত 9100, অনান্য সার্ভারে এটি ভিন্ন হতে পারে। আপনার হার্ডওয়্যার "
-"সহায়িকা দেখুন।"
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "প্রিন্টারের হোস্ট-নাম বা আই-পি নেই!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "প্রিন্টারের হোস্ট-নাম বা আই-পি"
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "ডিভাইস URI তালিকা পুনরায় তৈরি করা হচ্ছে..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "প্রিন্টারের URI"
-
-# সাম:  চেক URI 
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"প্রিন্টার ব্যবহার করার জন্য আপনি সরাসরি URI টি বলে দিতে পারেন। URI টি অবশ্যই CUPS "
-"অথবা Foomatic এর সুনির্দিষ্ট বিবরণ অনুযায়ী হতে হবে। মনে রাখবেন, সব স্পুলার কিন্তু "
-"সবধরনের URI সমর্থন করে না।"
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "একটি বৈধ ইউ.আর.আই. লিখতে হবে!"
-
-# FIXME
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "পাইপ তথ্য কমান্ড"
-
-# সাম: pipe = ?
-# প্রেরিত হবে নাকি অপেক্ষা করবে
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"এখানে আপনি যেকোন একটি কমান্ড লাইন নির্দিষ্ট করে দিতে পারেন। প্রিন্টিং এর কাজগুলো "
-"তখন সরাসরি কোন প্রিন্টারের বদলে এই কমান্ড লাইন দিয়ে প্রেরিত হবে।"
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "কমান্ড লাইন"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "একটি কমান্ড লাইন অবশ্যই লিখতে হবে!"
-
-# সাম
-# please check... not sure
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-"অনেক HP প্রিন্টারে বিশেষ কিছু ফাংশান আছে, রক্ষণাবেক্ষন (কালির পরিমান নিরীক্ষন, নজল "
-"পরিস্কার করা, হেড একরেখীকরন, ...) খুব বেশী পুরনো না হলে, মাল্টি-ফাংশান ডিভাইসে "
-"স্ক্যানিং এবং কার্ড রিডার সম্বলিত প্রিন্টারে মেমরী কার্ড ব্যবহার। "
-
-# সাম
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-"আপনার HP প্রিন্টারের বাড়তি ফাংশানগুলো ব্যবহার করতে চাইলে, যথাযথ সফ্টওয়্যার দিয়ে "
-"সেটআপ করুন: "
-
-# সাম: incomplete
-# \"Toolbox\"
-# four-edge?
-# full-bleed?
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-"হয় নতুন HPLIP দিয়ে যাতে আপনি সহজে ব্যবহারযোগ্য গ্রাফিক্যাল অ্যাপ্লিকেশন \"Toolbox\" "
-"এর সাহায্যে প্রিন্টার রক্ষণাবেক্ষন করতে পারেন এবং নতুন PhotoSmart মডেলে four-edge "
-"full-bleed"
-
-# সাম
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-"অথবা পুরনো HPOJ দিয়ে যাতে আপনি শুধু স্ক্যানার বা মেমরী কার্ড ব্যবহার করতে পারেন, "
-"তবে HPLIP কাজ না করলে এটি আপনাকে সাহায্য করতে পারে। "
-
-# সাম
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr "আপনার পচ্ছন্দ কি (HP না এমন প্রিন্টারের জন্য \"একটিও না\" বাছাই করুন)?"
-
-# sam
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-# সাম
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-# সাম
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"আপনার প্রিন্টারটি কি HP বা Sony মাল্টি-ফাংশন ডিভাইস (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3000/3200/3300/4345 স্ক্যানারসহ, DeskJet 450, Sony IJP-V100), "
-"একটি HP PhotoSmart বা একটি HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "%s প্যাকেজ ইনস্টল করা হচ্ছে..."
-
-# FIXME
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr "%s-এর ওপর শুধুমাত্র প্রিন্ট চালানো যাবে।"
-
-# সাম
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr "আপনার পুরনো HPOJ কনফিগারেশন ফাইল %s আপনার %s এর জন্য সরানো যাচ্ছে না! "
-
-# সাম
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr "অনুগ্রহ করে আপনি ফইলটি সরিয়ে ফেলুন এবং HPOJ পুনরায় চালু করুন।"
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "ডিভাইস পরীক্ষা করা হচ্ছে ও %s কনফিগার করা হচ্ছে..."
-
-# সাম
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "HPLIP দিয়ে আপনি কোন প্রিন্টার সেট আপ করতে চান?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "SANE প্যাকেজ ইনস্টল করা হচ্ছে..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr "%s-কে স্ক্যান করা সম্ভব হবে না।"
-
-# সাম
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr "আপনার %s এর ব্যবহার ও রক্ষণাবেক্ষন"
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "mtools প্যাকেজ ইনস্টল করা হচ্ছে..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "%s থেকে ফটো মেমরি কার্ড ব্যবহার করা সম্ভব হবে না।"
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "আপনার HP মাল্টি-ফাংশন ডিভাইস স্ক্যান করা হচ্ছে"
-
-# FIXME
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "আপনার HP মাল্টি-ফাংশন ডিভাইস থেকে ফটো মেমরি কার্ড ব্যবহার"
-
-# সাম
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr "ডিভাইস কন্‌ফিগার হচ্ছে..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "আপনার কম্পিউটারের প্রিন্টার পোর্টকে CUPS-এর ব্যবহারোপযোগী করে তোলা..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "প্রিন্টার ডেটাবেস পড়া হচ্ছে..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "প্রিন্টারের নাম ও সংশ্লিষ্ট মন্তব্য লিখুন"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "প্রিন্টারের নামে শুধু বর্ণমালা, সংখ্যা এবং আন্ডারস্কোর থাকে"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"\"%s\" প্রিন্টারটি ইতিমধ্যেই বিদ্যমান,\n"
-"আপনি কি আসলেই এটির পুরনো কনফিগারেশনের ওপর দিয়ে লিখতে চান?"
-
-# সাম
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-"\"%s\" প্রিন্টারটির নামে ১২ অক্ষরের বেশী আছে যা কিনা এটিকে উইন্ডোজ ক্লায়েন্ট থেকে "
-"অব্যবহারযোগ্য করে দিতে পারে। আপনি কি তবুও এই নামটি ব্যবহার করতে চান?"
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"প্রত্যেক প্রিন্টারের একটি নাম প্রয়োজন (যেমন \"printer\")। বিবরণ এবং অবস্থানের "
-"ক্ষেত্র ভরাট করার প্রয়োজন নেই। সেগুলো ব্যবহারকারীদের জন্য মন্তব্যস্বরুপ।"
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "প্রিন্টারের নাম"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "বর্ণনা"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "অবস্থান"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "প্রিন্টার ডেটাবেস প্রস্তুত করা হচ্ছে..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "আপনার প্রিন্টারের মডেল"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "মডেলটি সঠিক"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "নিজ হাতে মডেল নির্বাচন করুন"
-
-# সাম: auto-detection = স্বয়ংক্রিয়‌-সনাক্তকরণ?
-# check other translations
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"অনুগ্রহ করে দেখুন Printerdrake আপনার প্রিন্টারটির মডেল স্বয়ংক্রিয়‌-সনাক্তকরণ পদ্ধতিতে "
-"সঠিকভাবে নির্নয় করেছে কিনা। যদি নির্নয় ভুল হয়ে থাকে বা \"Raw প্রিন্টার\" হিসেবে "
-"চিহ্নিত হয়, তাহলে তালিকা থেকে সঠিক মডেল বেছে নিন।"
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "প্রস্তুতকারক কর্তৃক সরবরাহকৃত একটি PPD ফাইল ইনস্টল করুন"
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-"প্রতিটি পোস্টস্ক্রিপ্ট প্রিন্টারের একটি PPD ফাইল সরবরাহ করা হয় যা প্রিন্টারের বিভিন্ন "
-"অপশন ও বৈশিষ্ট্যের বিবরণ দেয়।"
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"এই ফাইলটি সাধারণত প্রিন্টারের সাথে সরবরাহকৃত সিডি'তে উইন্ডোজ ও ম্যাক-এর ড্রাইভারের "
-"সাথে থাকে।"
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr "এছাড়াও আপনি প্রিন্টার প্রস্তুতকারকের ওয়েবসাইটে PPD ফাইলটি খুঁজে পেতে পারেন।"
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"আপনার কম্পিউটারে উইন্ডোজ ইনস্টল করা থাকলে, উইন্ডোজ-এর ব্যবহৃত পার্টিশনেও PPD ফাইলটি "
-"খুঁজে পেতে পারেন।"
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-"প্রিন্টারের PPD ফাইলটি ইনস্টল করা হলে ও প্রিন্টার সেট-আপ এর সময় তা ব্যবহার করা হলে "
-"প্রিন্টারের হার্ডওয়ার কর্তৃক সরবরাহকৃত প্রতিটি অপশনই ব্যবহার করা যায়।"
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"আপনার কম্পিউটারে যে PPD ফাইলটি ইনস্টল করা হবে এখান থেকে আপনি তা নির্বাচন করতে "
-"পারবেন; পরবর্তী সময়ে এই ফাইলটি প্রিন্টার সেট-আপ করায় ব্যবহৃত হবে।"
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "যেখানে থেকে PPD ফাইলটি ইনস্টল করা হচ্ছে"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "ফ্লপি ডিস্ক"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "অন্যান্য স্থান"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "PPD ফাইল নির্বাচন করুন"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "PPD ফাইল %s-এর কোন অস্তিত্ব নেই অথবা এটি পড়া যাচ্ছে না!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "PPD ফাইল %s PPD'র বর্ণনার (Specification) সাথে মিলছে না!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "PPD ফাইল ইনস্টল করা হচ্ছে..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI উইন-প্রিন্টার কনফিগারেশন"
-
-# সাম
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"আপনি একটি OKI লেজার উইন-প্রিন্টার কনফিগারেশন করছেন। এই প্রিন্টারগুলো\n"
-"একটি বিশেষ যোগাযোগ প্রোটকল ব্যবহার করে বিধায় শুধুমাত্র প্রথম প্যারালাল পোর্টে সংযুক্ত "
-"অবস্থায় কাজ করতে পারে। আপনার প্রিন্টার যখন অন্য পোর্টে বা প্রিন্টার সার্ভার বক্সে "
-"সংযুক্ত থাকে, পরীক্ষামূলক পৃষ্ঠা প্রিন্ট করার আগে তা প্রথম প্যারালাল পোর্টে সংযুক্ত করে "
-"নিন। অন্যথায় প্রিন্টারটি কাজ করবে না। আপনার সংযোগের ধরন নির্ধারনী সেটিংসমূহ "
-"ড্রাইভারটি অগ্রাহ্য করবে।"
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "লেক্সমার্ক ইঙ্কজেট কনফিগারেশন"
-
-# সাম: boxes = বাক্স? :s
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"লেক্সমার্ক সরবরাহকৃত ইঙ্কজেট প্রিন্টার ড্রাইভার শুধুমাত্র স্থানীয় প্রিন্টারগুলো সমর্থন করে, "
-"কোন রিমোট প্রিন্টার বা প্রিন্ট সার্ভার নয়। অনুগ্রহ করে আপনার প্রিন্টারটি স্থানীয় "
-"পোর্টের সাথে সংযুক্ত করুন অথবা যে মেশিনে এটি সংযুক্ত, সেই মেশিনে কনফিগার করুন।"
-
-# সাম : 
-# intercative translated as 
-# ইন্টারঅ্যাকটিভ
-# frontend = ফ্রন্টএন্ড?
-# printhead alignment = প্রিন্টহেড একরেখীকরন
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"আপনার Lexmark ইঙ্কজেট ও এই কনফিগারেশন দিয়ে প্রিন্ট করার জন্য, আপনার দরকার "
-"Lexmark (http://www.lexmark.com/) সরবরাহকৃত ইঙ্কজেট প্রিন্টার ড্রাইভারসমূহ। "
-"\"Drivers\" লিঙ্কটিতে ক্লিক করুন। অতপর: আপনার মডেল নির্বাচন করুন ও অপারেটিং "
-"সিস্টেম হিসেবে \"Linux\" বেছে নিন। ড্রাইভারগুলো RPM প্যাকেজ অথবা shell স্ক্রিপ্ট "
-"হিসেবে ইন্টারঅ্যাকটিভ গ্রাফিক্যাল ইনস্টলেশন সহ সরবরাহ করা হয়। গ্রাফিক্যাল ফ্রন্টএন্ড "
-"দিয়ে কনফিগারেশন করার প্রয়োজন নেই। লইসেন্স চুক্তি পর সরাসরি বাতিল করে দিন। তারপর "
-"\"lexmarkmaintain\" দিয়ে প্রিন্টহেড একরেখীকরন পৃষ্ঠা প্রিন্ট করুন এবং এই  প্রোগ্রাম "
-"দিয়ে হেড একরেখীকরন সেটিং ঠিক করুন।"
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "লেক্সমার্ক X125 কনফিগারেশন"
-
-# সাম: boxes = বাক্স?
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"এ প্রিন্টারের ড্রাইভার শুধুমাত্র ইউএসবি দ্বারা সংযুক্ত স্থানীয় প্রিন্টার সমর্থন করে, কোন "
-"রিমোট প্রিন্টার বা প্রিন্ট সার্ভার নয়। অনুগ্রহ করে আপনার প্রিন্টারটি স্থানীয় ইউএসবি "
-"পোর্টের সাথে সংযুক্ত করুন অথবা যে মেশিনে এটি সংযুক্ত, সেই মেশিনে কনফিগার করুন।"
-
-# সাম
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Samsung ML/QL-85G কনফিগারেশন"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"এ প্রিন্টারের ড্রাইভার শুধুমাত্র প্রথম প্যারালাল পোর্ট দ্বারা সংযুক্ত স্থানীয় প্রিন্টার "
-"সমর্থন করে, কোন রিমোট প্রিন্টার, প্রিন্ট সার্ভার বা অন্য প্যারালাল পোর্ট নয়। অনুগ্রহ "
-"করে আপনার প্রিন্টারটি প্রথম প্যারালাল পোর্টের সাথে সংযুক্ত করুন অথবা যে মেশিনে এটি "
-"সংযুক্ত, সেই মেশিনে কনফিগার করুন।"
-
-# সাম
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Canon LBP-460/660 কনফিগারেশন"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "HP লেসারজেট ১০০০-এর ফার্মওয়ার-আপলোড"
-
-# সাম
-# resolution = ?
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"প্রিন্টার ডিফল্ট মানসমূহ\n"
-"\n"
-"আপনাকে নিশ্চিত করতে হবে যে লেজার প্রিন্টারের পৃষ্ঠা সাইজ, কালির ধরন/প্রিন্টিং মোড "
-"(যদি থাকে) এবং হার্ডওয়্যার কনফিগারেশন সঠিকভাবে সেট করা হয়েছে। মনে রাখবেন মান/"
-"রেজুলেশন বাড়ানোর সাথে সাথে প্রিন্টিং এর গতি কমতে থাকে।"
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "প্রিন্টারের ডিফল্ট বৈশিষ্ট্য"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "অপশন %s-কে অবশ্যই একটি পূর্ণসংখ্যা হতে হবে!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "অপশন %s-কে অবশ্যই একটি সংখ্যা হতে হবে!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "অপশন %s সীমা বহির্ভূত!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"আপনি কি এই প্রিন্টারটিকে (\"%s\")\n"
-"ডিফল্ট প্রিন্টাররূপে নির্দিষ্ট করতে চান?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "পরীক্ষামূলক পৃষ্ঠা"
-
-# সাম
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"অনুগ্রহ করে প্রিন্টিং এর জন্য পরীক্ষামূলক পৃষ্ঠা বেছে নিন।\n"
-"দ্রষ্টব্য: ছবি সম্বলিত পরীক্ষামূলক পৃষ্ঠা অনেক ধীরে প্রিন্ট হয় এবং কম মেমরি সম্পন্ন "
-"লেজার প্রিন্টারে তা প্রিন্ট নাও হতে পারে। বেশিরভাগ ক্ষেত্রে সাধারণ পরীক্ষামূলক "
-"পৃষ্ঠাটিই যথেষ্ট।"
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "কোন পরীক্ষামূলক পৃষ্ঠা নেই"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "প্রিন্ট"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "সাধারণ (Standard) পরীক্ষামূলক পৃষ্ঠা"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "বিকল্প পরীক্ষামূলক পৃষ্ঠা (লেটার)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "বিকল্প পরীক্ষামূলক পৃষ্ঠা (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "পরীক্ষামূলক ফটো পৃষ্ঠা"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "কোন পরীক্ষামূলক পৃষ্ঠা ছাপাবে না"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "পরীক্ষামূলক পৃষ্ঠা(সমূহ) ছাপানো হচ্ছে..."
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr "পরীক্ষামূলক ফটো পৃষ্ঠা এড়িয়ে যাওয়া হচ্ছে।"
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"প্রিন্টারের নিকট পরীক্ষামূলক পৃষ্ঠা(সমূহ) পাঠানো হয়েছে।\n"
-"প্রিন্টার সচল হওয়ার জন্য কিছু সময় লাগতে পারে।\n"
-"প্রিন্টিং এর অবস্থা:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"প্রিন্টারের নিকট পরীক্ষামূলক পৃষ্ঠা(সমূহ) পাঠানো হয়েছে।\n"
-"প্রিন্টার সচল হওয়ার জন্য কিছু সময় লাগতে পারে।\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "এটা কি সঠিকভাবে কাজ করেছে?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Raw প্রিন্টার"
-
-# সাম
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"কমান্ড লাইন থেকে একটি ফাইল প্রিন্ট করতে (টার্মিনাল উইন্ডো) \"%s <file>\" কমান্ডটি "
-"অথবা কোন গ্রাফিকাল প্রিন্টিং টুল: \"xpp <file>\" or \"kprinter <file>\" ব্যবহার "
-"করুন। গ্রাফিকাল টুলগুলো দিয়ে আপনি সহজেই প্রিন্টার বেছে নিতে ও তার অপশনগুলো বদলাতে "
-"পারবেন।\n"
-
-# সাম
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"এই কমান্ডগুলো আপনি অনেক অ্যাপ্লিকেশনের প্রিন্ট ডায়ালগের \"প্রিন্টিং কমান্ড\" ক্ষেত্রে "
-"ব্যবহার করতে পারেন, কিন্তু এখানে ফাইল নাম উল্লেখ করবেন না কারন তা অ্যাপ্লিকেশন "
-"থেকে সরবরাহ করা হয়।\n"
-
-# সাম
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"\"%s\" কমান্ডটি একটি প্রিন্টিং কাজের অপশন সেটিং পরিবর্তন করার জন্যেও ব্যবহৃত হয়। "
-"ইচ্ছানুযায়ী আপনার সেটিংগুলো কমান্ড লাইনে লিখুন, যেমন \"%s <ফাইল>\"।"
-
-# সাম: current  = বর্তমান?
-# Print option list
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"বর্তমান প্রিন্টারের অপশনসমূহ জানতে নিম্নলিখিত তালিকাটি পড়ুন অথবা \"প্রিন্ট অপশনের "
-"তালিকা\" বাটন ক্লিক করুন।%s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"এখানে বর্তমান প্রিন্টারের জন্য একটি সহজলভ্য প্রিন্টিং অপশনের তালিকা:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"কমান্ড লাইন থেকে একটি ফাইল প্রিন্ট করতে (টার্মিনাল উইন্ডো) \"%s <file>\" কমান্ডটি "
-"ব্যবহার করুন।\n"
-
-# সাম
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"এই কমান্ড আপনি অনেক অ্যাপ্লিকেশনের প্রিন্ট ডায়ালগের \"প্রিন্টিং কমান্ড\" ক্ষেত্রে "
-"ব্যবহার করতে পারেন, কিন্তু এখানে ফাইল নাম উল্লেখ করবেন না কারন তা অ্যাপ্লিকেশন "
-"থেকে সরবরাহ করা হয়।\n"
-
-# সাম: current  = বর্তমান?
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr "বর্তমান প্রিন্টারের অপশনসমূহ জানতে \"প্রিন্ট অপশনের তালিকা\" বাটন ক্লিক করুন।"
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"কমান্ড লাইন থেকে একটি ফাইল প্রিন্ট করতে (টার্মিনাল উইন্ডো) \"%s <file>\" অথবা \"%"
-"s <file>\" কমান্ডটি ব্যবহার করুন।\n"
-
-# সাম
-# panic button = জরুরী বাটন?
-# immediately =  
-# ত‍‍তক্ষনাত বানান করতে পারি নাই।
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"অপশন সেটিং এবং প্রিন্টিং কাজ ব্যবস্থাপনায় আপনি \"xpdq\" গ্রাফিক্যাল ইন্টারফেসটিও "
-"ব্যবহার করতে পারেন।\n"
-"আপনি যদি ডেস্কটপ পরিবেশ হিসেবে KDE ব্যবহার করেন, তবে এতে একটি \"জরুরী বাটন\" "
-"থাকবে, একটি \"STOP Printer!\" নামের আইকন, যা ক্লিক করে সব প্রিন্টিং এর কাজ "
-"ত‍‍তক্ষনাত বন্ধ করা যাবে। ধরুন এটি ব্যবহার হবে প্রিন্টারে পৃষ্ঠা আটকিয়ে গেলে।\n"
-
-# সাম
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"\"%s\" এবং \"%s\" কমান্ডগুলো একটি প্রিন্টিং কাজের অপশন সেটিং পরিবর্তন করার জন্যেও "
-"ব্যবহৃত হয়। ইচ্ছানুযায়ী আপনার সেটিংগুলো কমান্ড লাইনে লিখুন, যেমন \"%s <ফাইল>\"।\n"
-
-# FIXME
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "\"%s\" এ মুদ্রিত হচ্ছে/স্ক্যান করছে/ফটো কার্ড"
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "\"%s\" এ মুদ্রিত হচ্ছে/স্ক্যান করছে"
-
-# সাম
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "\"%s\" এ প্রিন্টিং/ফোটো কার্ড এক্সেস"
-
-# সাম
-#: printer/printerdrake.pm:3896
-#, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "প্রিন্টার \"%s\" ব্যবহার/রক্ষণাবেক্ষন করা হচ্ছে"
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "\"%s\" প্রিন্টারে মুদ্রিত হচ্ছে"
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "প্রিন্ট সংক্রান্ত অপশনের তালিকা"
-
-# সাম
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-"আপনার %s টি HP এর HPLIP ড্রাইভার সফ্টওয়্যার দিয়ে সেটআপ করা হয়েছে। এভাবে আপনার "
-"প্রিন্টারের অনেক বিশেষ ফিচারকে সাপোর্ট দেয়া হয়েছে।\n"
-"\n"
-
-# সাম
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-"আপনার প্রিন্টারের স্ক্যানারটি সাধারণ SANE সফ্টওয়্যার দিয়ে ব্যবহার করা যাবে যেমন, "
-"Kooka বা XSane (দুটোই মাল্টিমিডিয়া/গ্রাফিক্স মেনুতে অবস্থিত)। "
-
-# সাম
-# শেয়ার 
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-"আপনার স্ক্যানারটি নেটওয়ার্ক শেয়ার করার জন্য Scannerdrake (Mandriva Linux নিয়ন্ত্রণ "
-"কেন্দ্র হার্ডওয়্যার/স্ক্যানার) চালান।\n"
-"\n"
-
-# সাম: 
-# USB mass storage?
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-"আপনার প্রিন্টারের মেমরী কার্ড রিডারগুলো সাধারণ USB mass storage এর মত ব্যবহার করা "
-"যায়। "
-
-# সাম
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-"কার্ড ঢোকানোর পর এটি ব্যবহার করার জন্য আপনার ডেস্কটপে একটি হার্ড ডিস্কের আইকন "
-"আসবে।\n"
-"\n"
-
-# সাম
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-"আপনার প্রিন্টারের মেমরী কার্ড রিডারগুলো ব্যবহার করতে হলে HP এর প্রিন্টার টুলবক্সে "
-"(মেনু: সিস্টেম/পর্যবেক্ষণ/HP প্রিন্টার টুলবক্স) \"ফাংশান\" ট্যাবে \"ফটো কার্ড ব্যবহার "
-"কর...\" বাটন ক্লিক করুন। "
-
-# সাম
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-"মনে রাখবেন এটি অনেক সময়সাপেক্ষ, ক্যামেরা বা USB card reader থেকে ছবি পড়া "
-"সাধারণত আরও দ্রুত হয়।\n"
-"\n"
-
-# সাম
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-"HP এর প্রিন্টার টুলবক্স (মেনু: সিস্টেম/পর্যবেক্ষণ/HP প্রিন্টার টুলবক্স) আপনার %s এর জন্য "
-"বিবিধ অবস্থা পর্যবেক্ষণ এবং রক্ষণাবেক্ষণ ফাংশানসমূহের সুবিধা প্রদান করে:\n"
-"\n"
-
-# সাম
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr " - কালির পরিমান/অবস্থা সম্পর্কিত তথ্য\n"
-
-# সাম
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr " - কালির নজল পরিস্কার\n"
-
-# সাম: incomplete
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr " - প্রিন্ট হেড একরেখীকরন\n"
-
-# incomplete
-#: printer/printerdrake.pm:3944
-#, c-format
-msgid " - Color calibration\n"
-msgstr " - কালার ক্যালিব্রেশন\n"
-
-# সাম
-# pls check the translation of 
-# \"Acquire\" 
-# 'Call' as in call a function.
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"আপনার বহুমাত্রিক ডিভাইসটি স্ক্যানার হেসেবে ব্যবহার করার জন্য স্বয়ংক্রিয়ভাবে কনফিগার "
-"করা হয়েছিল। আপনি এখন কমান্ড লাইনে \"scanimage\" (যদি একাধিক স্ক্যানার থাকে তবে "
-"\"scanimage -d hp:%s\" দিয়ে নির্ধারন করুন) অথবা গ্রাফিক্যাল ইন্টারফেস \"xscanimage"
-"\" বা \"xsane\" ব্যবহার করে স্ক্যান করতে পারেন। আপনি যদি GIMP ব্যবহার করেন, "
-"তাহলে \"File\"/\"Acquire\" মেনুর সঠিক পয়েন্ট বেছে নিয়েও স্ক্যান করতে পারেন। এ "
-"বিষয়ে আরো সাহায্য পেতে কমান্ড লাইনে \"man scanimage\" ব্যবহার করুন।\n"
-"\n"
-"এই ডিভাইসে স্ক্যানিং সেটআপ করার জন্য \"scannerdrake\" চালানোর প্রয়োজন নেই, এটি "
-"তখনই দরকার হবে যদি আপনি স্ক্যানারটি নেটওয়ার্কে শেয়ার করতে চান। "
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "প্রিন্টার কনফিগারেশন স্থানান্তর করো"
-
-# সাম
-# queues 
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"স্পুলার %s এর জন্য করা প্রিন্টার কনফিগারেশনটি আপনি আপনার বর্তমান স্পুলার %s এ কপি "
-"করতে পারেন। সমস্ত কনফিগারেশন মান (প্রিন্টারের নাম, বর্ণনা, স্থান, সংযোগের ধরন "
-"ডিফল্ট অপশনের মান) কপি হবে, কিন্তু প্রিন্টারের কাজগুলো কপি হবে না।\n"
-"সব প্রিন্ট সারি সরানো যায় না, নিম্নলিখিত কারনে:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"যে সব প্রিন্টার নভেল (Novell) সার্ভারের সাথে যুক্ত কিংবা যে সব প্রিন্টার কোন free-"
-"formed কমান্ডের নিকট তথ্য প্রেরণ করে, তাদেরকে CUPS সমর্থন করে না।\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"পি.ডি.কিউ. শুধুমাত্র স্থানীয় প্রিন্টার, দূর-নিয়ন্ত্রিত এল.পি.ডি. প্রিন্টার, এবং সকেট/টি."
-"সি.পি. প্রিন্টার সমর্থন করে।\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "এল.পি.ডি. এবং LPRng আই.পি.পি. প্রিন্টার সমর্থন করে না।\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"উপরন্তু, এই প্রোগ্রাম বা \"foomatic-configure\" দ্বারা যে সব প্রিন্ট-সারী (Queue) "
-"তৈরি করা হয় নি, তাদেরকে স্থানান্তর করা যায় না।"
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"এছাড়া যে সব প্রিন্টারের PPD ফাইল প্রিন্টারের প্রস্তুতকারক কর্তৃক সরবরাহকৃত তাদের অথবা "
-"CUPS-এর নিজস্ব ড্রাইভারকেও স্থানান্তর করা যায় না।"
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"যে সব প্রিন্টারকে স্থানান্তর করতে চান তাদের চিহ্নিত করুন ও তারপর \"স্থানান্তর\" চাপুন।"
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "প্রিন্টারকে স্থানান্তর করবে না"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "স্থানান্তর"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"\"%s\" নামের একটি প্রিন্টার ইতিমধ্যেই %s অধীনে আছে। \n"
-"\"স্থানান্তর\" এ ক্লিক করুন এর উপরে লেখার জন্য।\n"
-"আপনি নতুন ধরণের নাম দিতে পারেন বা এই প্রিন্টারকে এড়িয়ে যেতে পারেন।"
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "প্রিন্টারের নতুন নাম"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "%s-কে স্থানান্তর করা হচ্ছে..."
-
-# সাম
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"আপনি আপনার পূর্বের ডিফল্ট প্রিন্টার (\"%s\") স্থানান্তর করেছেন। আপনার নতুন প্রিন্টিং "
-"সিস্টেম %s এর জন্যেও কি এটি ডিফল্ট প্রিন্টার হবে?"
-
-# FIXME
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "প্রিন্টার বিষয়ক তথ্য পুনরায় পড়া হচ্ছে..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "নেটওয়ার্ক সচল করছি..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "নেটওয়ার্ককে এখন কনফিগার করো"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "নেটওয়ার্কের কর্মক্ষমতা কনফিগার করা হয় নি"
-
-# সাম
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"আপনি একটি রিমোট প্রিন্টার কনফিগার করতে যাচ্ছেন। এটির জন্য সক্রিয় নেটওয়ার্ক সংযুক্তি "
-"প্রয়োজন, কিন্তু আপনার নেটওয়ার্ক এখনো কনফিগার করা হয়নি। নেটওয়ার্ক কনফিগারেশন ছাড়াই "
-"এগিয়ে গেলে, কনফিগার করা প্রিন্টারটি ব্যবহারযোগ্য হবে না। আপনি কিভাবে এগোতে চান?"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "নেটওয়ার্ক কনফিগার না করেই এগিয়ে যাও"
-
-# সাম
-# ইনস্টলেশন
-# নিয়ন্ত্রণ কেন্দ্র
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"ইনস্টলেশনের সময় করা নেটওয়ার্ক কনফিগারেশন চালু করা যাচ্ছে না। আপনার সিস্টেম বুট "
-"করার পর নেটওয়ার্কে প্রবেশ করা যাচ্ছে কিনা তা পরীক্ষা করুন এবং %s নিয়ন্ত্রণ কেন্দ্র "
-"সেকশন \"Network & Internet\"/\"Connection\" ব্যবহার করে আপনার কনফিগারেশন ঠিক "
-"করুন, এবং পরবর্তীতে আবারো %s নিয়ন্ত্রণ কেন্দ্র সেকশন \"Hardware\"/\"Printer\" দিয়ে "
-"প্রিন্টার সেটআপ করুন"
-
-# সাম: 
-# hardware spelling is wrong in commonwords.po
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"নেটওয়ার্ক সংযুক্তি চলন্ত ছিল না এবং সক্রিয় করা সম্ভব হয়নি। অনুগ্রহ করে আপনার "
-"কনফিগারেশন ও হার্ডওয়্যার পরীক্ষা করুন। অতপর: আবার আপনার দূরবর্তী প্রিন্টার কনফিগার "
-"করার চেষ্টা করুন।"
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "প্রিন্টিং ব্যবস্থা পুনরায় চালু করা হচ্ছে..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "উচ্চ"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "মতিভ্রম"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "%s নিরাপত্তা মাত্রা অনুসারে একটি প্রিন্টিং ব্যবস্থা ইনস্টল করা হচ্ছে"
-
-# সাম
-# প্রিন্টিং সিস্টেম
-# নিরাপত্তা স্তর
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"আপনি 2$%s নিরাপত্তা চালুকৃত একটি সিস্টেমে 1$%s প্রিন্টিং সিস্টেম ইনস্টল করতে "
-"যাচ্ছেন।\n"
-"\n"
-"এই প্রিন্টিং সিস্টেমটি একটি daemon (নেপথ্যে চলা প্রসেস) চালিয়ে রাখে যেটি প্রিন্ট "
-"জবের জন্য অপেক্ষা করে ও তা নিয়ন্ত্রন করে। এই daemon টি নেটওয়ার্কের দুরবর্তী মেশিন "
-"থেকেও ব্যবহারযোগ্য, এবং একটি আক্রমনের লক্ষ্যবস্তুও বটে। অতএব এই নিরাপত্তা স্তরে "
-"সাধারনত অল্পকিছু daemon চালু করা হয়।\n"
-"\n"
-"আপনি কি আসলেই এই মেশিনে প্রিন্টার কনফিগার করতে চান?"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "বুট করার সময় প্রিন্টিং ব্যবস্থাকে চালু করা হবে"
-
-# সাম
-# সয়ংক্রিয়ভাবে
-# নিরাপত্তা স্তর
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"যখন মেশিন বুট হয়, প্রিন্টিং সিস্টেম (%s) সয়ংক্রিয়ভাবে চালু হবে না।\n"
-"\n"
-"সম্ভবত উচু নিরাপত্তা স্তরে যাওয়ার কারনে প্রিন্টিং সয়ংক্রিয়ভাবে চালু হওয়া বন্ধ করে "
-"দেয়া হয়েছে। কারন প্রিন্টিং সিস্টেম আক্রমনের একটি সম্ভাব্য লক্ষ্যবস্তু।\n"
-"\n"
-"আপনি কি প্রিন্টিং সিস্টেম সয়ংক্রিয়ভাবে চালুকরণ পুনরায় চালু করতে চান?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "ইনস্টলকৃত সফটওয়ার পরীক্ষা করা হচ্ছে..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "%s মুছে ফেলা হচ্ছে..."
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "প্রিন্টিং ব্যবস্থা %s-কে অপসারণ করা যায় নি!"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "%s ইনস্টল করা হচ্ছে..."
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "প্রিন্টিং ব্যবস্থা %s-কে ইনস্টল করা যায় নি!"
-
-# সাম
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"এই মোডে কোন স্থানীয় প্রিন্টিং সিস্টেম নেই, সব প্রিন্ট অনুরোধ সরাসরি নিম্নোল্লেখিত "
-"সার্ভারে প্রবেশ করে। দ্রষ্টব্য: এই সময়ে স্থানীয় প্রিন্ট সারি নির্দিষ্ট করার কোন ব্যবস্থা "
-"নেই এবং যদি উল্লেখিত সার্ভার নিষ্ক্রিয় থাকে তবে এই মেশিন থেকে প্রিন্ট সম্ভব হবে না।"
-
-# সাম: Quit = বাহির? 
-# Quit
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-"আপনার CUPS সার্ভারের হোস্ট নাম অথবা IP উল্লেখ করুন এবং যদি আপনি এই মোড ব্যবহার "
-"করতে চান তবে ঠিক আছে ক্লিক করুন, অন্যথায় \"বাহির\" ক্লিক করুন।"
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "দূরবর্তী সার্ভারের নাম অথবা IP:"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "ডিফল্ট প্রিন্টার নির্দিষ্ট করা হচ্ছে..."
-
-# সাম
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "স্থানীয় CUPS প্রিন্টিং সিস্টেম, নাকি দূরবর্তী CUPS সার্ভার?"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr "CUPS প্রিন্টিং সিস্টেম দুইভাবে ব্যবহৃত হতে পারে: "
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr "১। CUPS প্রিন্টিং সিস্টেম স্থানীয়ভাবে চলতে পারে। "
-
-# সাম
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-"স্থানীয় প্রিন্টারগুলো ব্যবহার করা যেতে পারে এবং একই নেটওয়ার্কে অবস্থিত অনান্য CUPS "
-"সার্ভারের দূরবর্তী প্রিন্টারগুলো স্বয়ংক্রিয়ভাবে সনাক্ত হয়। "
-
-# সাম:
-# resources  = রিসোর্স লিখলাম।
-# daemon 
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-"এই পদ্ধতিটির অসুবিধা হল, স্থানীয় মেশিনে অনেক বেশি রিসোর্স প্রয়োজন হয়: অতিরিক্ত "
-"সফ্টওয়্যার প্যাকেজ ইনস্টল করতে হয়, পাশাপাশি CUPS daemon চলতে থাকে যার জন্য মেমরী "
-"প্রয়োজন, এবং IPP পোর্টটি (পোর্ট ৬৩১) খোলা হয়। "
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr "২। সকল প্রিন্টিং অনুরোধ সরাসরি দূরবর্তী CUPS সার্ভারে পাঠানো হবে। "
-
-# সাম
-# daemon 
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-"এখানে, স্থানীয় রিসোর্সের উপর চাপ অনেকটা কমিয়ে আনা হয়েছে। কোন CUPS daemon "
-"চালানো বা পোর্ট খোলা হয় না, স্থানীয় প্রিন্ট সারির জন্য সফ্টওয়্যার সেটআপ করা হয় না। "
-"অতএব মেমরী ও ডিস্কস্পেস দুটোই কম ব্যবহৃত হয়। "
-
-# সাম
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-"দুর্বল দিক হচ্ছে, এই সময়ে স্থানীয় প্রিন্টার নির্দিষ্ট করার কোন ব্যবস্থা নেই এবং "
-"উল্লেখিত সার্ভার যদি নিষ্ক্রিয় থাকে তবে এই মেশিন থেকে প্রিন্ট সম্ভব হবে না। "
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr "আপনার সিস্টেমে CUPS কিভাবে সেট-আপ হওয়া উচিত?"
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr "দূরবর্তী সার্ভার, এখানে নাম বা আই-পি দিন:"
-
-# সাম
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr "স্থানীয় CUPS প্রিন্টিং সিস্টেম"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "প্রিন্টার স্পুলার (Spooler) নির্বাচন করুন"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "আপনি কোন প্রিন্টিং ব্যবস্থা (স্পুলার) ব্যবহার করতে চান?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "প্রিন্টার \"%s\" কে কনফিগার করার প্রচেষ্টা ব্যর্থ হয়েছে!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "ফুম্যাটিক ইনস্টল করা হচ্ছে..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "%s প্যাকেজ ইনস্টল করা যায় নি, %s চালু করা যাচ্ছে না!"
-
-# সাম
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"নিম্নের প্রিন্টারগুলো কনফিগার করা হয়েছে। প্রিন্টারের সেটিংসমূহ বদলাতে, ডিফল্ট "
-"প্রিন্টার সেট করতে বা তথ্য জানতে, এর নামের উপর ডাবল‌-ক্লিক করুন। "
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "সকল ব্যবহারযোগ্য দূর-নিয়ন্ত্রিত CUPS প্রিন্টার প্রদর্শন করো"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"প্রিন্টারের তালিকা পুনরায় প্রদর্শন করো (সকল ব্যবহারযোগ্য দূর-নিয়ন্ত্রিত CUPS প্রিন্টার "
-"প্রদর্শন করার জন্য)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS কনফিগার"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "প্রিন্টিং ব্যবস্থা পরিবর্তন করো"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "সাধারণ মোড"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "অভিজ্ঞ মোড"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "প্রিন্টার সংক্রান্ত অপশন"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "প্রিন্টার কনফিগারেশন পরিবর্তন করো"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"প্রিন্টার %s%s\n"
-"আপনি এই প্রিন্টারের কি পরিবর্তন করতে চান?"
-
-# সাম
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "এই প্রিন্টারটি নিষ্ক্রিয়"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "করে ফেলো!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "প্রিন্টার সংযোগের ধরন"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "প্রিন্টারের নাম, বিবরণ, অবস্থান"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "প্রিন্টারের প্রস্তুতকারক, মডেল, ড্রাইভার"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "প্রিন্টারের প্রস্তুতকারক, মডেল"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "এই প্রিন্টারটিকে ডিফল্ট হিসেবে নির্দিষ্ট করো"
-
-# সাম
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "প্রিন্টার সক্রিয় করো"
-
-# সাম
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "প্রিন্টার নিষ্ক্রিয় করো"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "পরীক্ষামূলক পৃষ্ঠা ছাপাও"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "এই প্রিন্টারের ব্যবহার শিখুন"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "প্রিন্টার অপসারণ করো"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "পুরনো প্রিন্টার \"%s\"-কে অপসারণ করা হচ্ছে..."
-
-# সাম
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "\"%s\" প্রিন্টারটি এখন সক্রিয়।"
-
-# সাম
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "\"%s\" প্রিন্টারটি এখন নিষ্ক্রিয়।"
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "আপনি কি \"%s\" প্রিন্টারটি অপসারণের ব্যাপারে নিশ্চিত?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "\"%s\" প্রিন্টারটি অপসারণ করা হচ্ছে..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "ডিফল্ট প্রিন্টার"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "এখন \"%s\" প্রিন্টারটি ডিফল্ট হিসেবে রয়েছে।"
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "_ফরম্যাটকৃত_ রেইড %s-এ পার্টিশন যোগ করা যাচ্ছে না"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "রেইড স্তর %d-এর জন্য পর্যাপ্ত সংখ্যক পার্টিশন নেই\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "/usr/share/sane/firmware ডিরেক্টরিটি তৈরি করা যায় নি!"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "/usr/share/sane/%s লিঙ্কটি তৈরি করা যায় নি!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-"ফার্মওয়ার ফাইল %s-কে /usr/share/sane/firmware ডিরেক্টরিতে কপি করা যায় নি!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "ফার্মওয়ার ফাইল %s-এর অনুমতি নির্দিষ্ট করা যায় নি!"
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "স্ক্যানার-ড্রেক"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr "আপনার স্ক্যানার(সমূহ) শেয়ার করার জন্য প্রয়োজনীয় প্যাকেজ ইনস্টল করা যায় নি।"
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr "আপনার স্ক্যানার(সমূহ) রুট ব্যতীত অপর ব্যবহারকারীগণ ব্যবহার করতে পারবে না।"
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "ভূয়া IPv4 বার্তা গ্রহণে সম্মতি/অসম্মতি জানাও।"
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr " ব্রডকাস্ট আই.সি.এম.পি. ইকো গ্রহণে সম্মতি/অসম্মতি জানাও।"
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr " আই.সি.এম.পি. ইকো গ্রহণে সম্মতি/অসম্মতি জানাও।"
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "স্বয়ংক্রিয় লগ-ইন অনুমোদন/নিষিদ্ধ করো"
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"এটির মান \"ALL\" হলে /etc/issue ও /etc/issue.net উভয়কেই অবস্থান করতে দেওয়া "
-"হয়।\n"
-"\n"
-"আর এটির মান NONE হলে কোনটিকেই রাখা হয় না।\n"
-"\n"
-"অন্যথায় শুধুমাত্র /etc/issue-কেই রাখা হয়।"
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "কনসোল ব্যবহারকারী কর্তৃক রিবুট অনুমোদন/নিষিদ্ধ করো।"
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "দূরবর্তী কম্পিউটার থেকে রুট অ্যাকাউন্টে লগ-ইন অনুমোদন/নিষিদ্ধ করো।"
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "সরাসরি রুট অ্যাকাউন্টে লগ-ইন অনুমোদন/নিষিদ্ধ করো।"
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"ডিসপ্লে ব্যবস্থাপকে ব্যবহারকারীদের তালিকা প্রদর্শন অনুমোদন/নিষিদ্ধ করো (কে.ডি.এম. "
-"এবং জি.ডি.এম.)।"
-
-# সাম
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-"রুট অ্যাকাউন্ট থেকে ব্যবহারকারী বদলানোর সময় ডিসপ্লে এক্সপোর্ট করা অনুমোদন/নিষিদ্ধ "
-"করো। pam_xauth(8) তে বিস্তারিত দেখুন।'"
-
-# সাম
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"X সংযোগ অনুমোদন/নিষিদ্ধ করো:\n"
-"\n"
-"- সব (সব সংযোগ অনুমোদিত),\n"
-"\n"
-"- স্থানীয় (শুধুমাত্র স্থানীয় মেশিন থেকে সংযোগ),\n"
-"\n"
-"- একটিও না (কোন সংযোগ অনুমোদিত নয়)।"
-
-# sam: argument = আর্গুমেন্ট?
-# argument 
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"এই প্রেরিত মান নির্দেশ করে ক্লায়েন্টগুলো নেটওয়ার্ক থেকে tcp পোর্ট ৬০০০ দিয়ে X "
-"সার্ভারে সংযুক্ত হতে অনুমদিত কিনা।"
-
-# সাম
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"অনুমোদন করো:\n"
-"\n"
-"- tcp_wrappers কর্তৃক নিয়ন্ত্রিত সকল সার্ভিস (hosts.deny(5) man page দেখুন) যদি "
-"\"ALL\" সেট করা থাকে,\n"
-"\n"
-"- শুধু স্থানীয় যদি \"LOCAL\" সেট করা থাকে,\n"
-"\n"
-"- কোনটি নয় যদি \"NONE\" সেট করা থাকে।\n"
-"\n"
-"আপনার প্রয়োজনীয় সার্ভিসগুলোকে অনুমোদন করতে, /etc/hosts.allow ব্যবহার করুন (hosts."
-"allow(5) দেখুন)।"
-
-# সাম: incomplete
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"/etc/security/msec/security.conf এ SERVER_LEVEL\n"
-"(বা SECURE_LEVEL, যদি অনুপস্থিত থাকে) যদি ৩ এর বেশী হয়, তবে\n"
-"/etc/security/msec/server এ নির্দেশ করার জন্য\n"
-"symlink /etc/security/msec/server তৈরী করে।<SERVER_LEVEL>.\n"
-"\n"
-"chkconfig --add, /etc/security/msec/serve টি ব্যবহার করে প্যাকেজ\n"
-"ইনস্টলেশনের সময় ফাইলে অবস্থিত সার্ভিস যোগ করার ব্যপারে\n"
-"সিদ্ধান্ত নেয়।"
-
-# সাম
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"ব্যবহারকারীদের জন্য crontab এবং at সক্রিয়/নিষ্ক্রিয় করো।\n"
-"\n"
-"অনুমোদিত ব্যবহারকারীদের /etc/cron.allow এবং /etc/at.allow এ রাখো (man at(1)\n"
-"ও crontab(1) দেখুন)।"
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr "কনসোল ১২ তে syslog রিপোর্ট সক্রিয়/নিষ্ক্রিয় করো"
-
-# সাম: name resolution = নাম বিশ্লেষন?
-# 'name resolution' is translated in various ways in this file.
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"নাম বিশ্লেষন স্পুফিং প্রতিরক্ষা ব্যবস্থা সক্রিয়/নিষ্ক্রিয় করো। যদি\n"
-"\"%s\" সত্য হয়, তবে syslog এও রিপোর্ট করো।"
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "নিরাপত্তা সতর্কতা:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "আই.পি. স্পুফিং প্রতিরক্ষা ব্যবস্থা সক্রিয়/নিষ্ক্রিয় করো।"
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "সিস্টেমে libsafe পাওয়া গেলে তা সক্রিয়/নিষ্ক্রিয় করো।"
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "IPv4-এর সন্দেহজনক প্যাকেট সম্পর্কে লগ লেখা সক্রিয়/নিষ্ক্রিয় করো।"
-
-# FIXME
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "msec-এর ঘন্টা প্রতি নিরাপত্তা পরীক্ষা সক্রিয়/নিষ্ক্রিয় করো।"
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-" শুধুমাত্র wheel গ্রুপের ব্যবহারকারীদের জন্য অথবা যে কোন ব্যবহারকারীর জন্য su সক্রিয় "
-"করো।"
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "ব্যবহারকারীর পরিচয় প্রমাণের জন্য পাসওয়ার্ড ব্যবহার করো।"
-
-# FIXME
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr "ইথারনেট কার্ডের বহুরূপী পরীক্ষা সক্রিয়/নিষ্ক্রিয় করো।"
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr " দৈনিক নিরাপত্তা পরীক্ষা সক্রিয়/নিষ্ক্রিয় করো।"
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr " একক ব্যবহারের ক্ষেত্রে (Single user level) sulogin(8) সক্রিয়/নিষ্ক্রিয় করো।"
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"msec কর্তৃক পাসওয়ার্ড পুরনো হয়ে যাওয়ার যে পরীক্ষা, তা থেকে এই নামকে বাদ দাও।"
-
-# সাম: not sure about the word বয়:বৃদ্ধি
-# aging 
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr "পাসওয়ার্ড বয়স \"max\" এবং পরিবর্তনে বিলম্ব \"inactive\" এ সেট করো।"
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-"পাসওয়ার্ডের পুনঃব্যবহার রোধকল্পে পাসওয়ার্ডের ইতিহাস-তালিকার দৈর্ঘ্য নির্দিষ্ট করো।"
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"পাসওয়ার্ডের সর্বনিম্ন দৈর্ঘ্য এবং পাসওয়ার্ডে ধারনকৃত সর্বনিম্ন সংখ্যক অঙ্ক এবং বড়হাতের "
-"অক্ষর সংখ্যা নির্দিষ্ট করো।"
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "রুট-এর umask নির্দিষ্ট করো।"
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "এটির মান হ্যাঁ হলে, উন্মুক্ত পোর্টসমূহ পরীক্ষা করো।"
-
-# sam: yes = হ্যাঁ?
-# at many palces 'yes' is kept 'yes'  
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"যদি হ্যাঁ সেট করা থাকে, পরীক্ষা কর:\n"
-"\n"
-"- পাসওয়ার্ড ফাঁকা কিনা,\n"
-"\n"
-"- /etc/shadow তে পাসওয়ার্ড অনুপস্থিত কিনা\n"
-"\n"
-"- root ছাড়া কারো id ০ কিনা।"
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"এটির মান হ্যাঁ হলে, ব্যবহারকারীর ব্যক্তিগত ফোল্ডারের ফাইলসমূহের অনুমতি পরীক্ষা করে।"
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"এটির মান হ্যাঁ হলে, নেটওয়ার্ক ডিভাইসগুলো প্রমিসকাস (Promiscuous) মোডে আছে কিনা তা "
-"পরীক্ষা করে।"
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "এটির মান হ্যাঁ হলে, দৈনিক নিরাপত্তা পরীক্ষা চালাও।"
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "এটির মান হ্যাঁ হলে, sgid ফাইলের অন্তর্ভুক্তি/অপসারণ পরীক্ষা করো।"
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
-"এটির মান হ্যাঁ হলে, /etc/shadow ফাইলে ফাঁকা পাসওয়ার্ড আছে কিনা তা পরীক্ষা করো।"
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "এটির মান হ্যাঁ হলে, suid/sgid ফাইলের চেকসাম (Checksum) পরীক্ষা করো।"
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "এটির মান হ্যাঁ হলে, suid রুট ফাইলসমূহের অন্তর্ভুক্তি/অপসারণ পরীক্ষা করো।"
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "এটির মান হ্যাঁ হলে, কোন মালিকানাবিহীন ফাইল থাকলে তা জানাও।"
-
-# FIXME: অর্থ বুঝতেসিনা ;-(
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "এটির মান হ্যাঁ হলে, সকলের পরিবর্তনযোগ্য ফাইল/ডিরেক্টরি পরীক্ষা করো"
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "এটির মান হ্যাঁ হলে, chkrootkit-এর সাহায্যে পরীক্ষা চালাও।"
-
-# FIXME
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"এটিতে টিক দেওয়া থাকলে মেইল সংক্রান্ত রিপোর্ট এই ই-মেইল ঠিকানায় অথবা রুট-এর নিকট "
-"প্রেরণ করা হয়।"
-
-# সাম
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "যদি হ্যাঁ সেট করা থাকে, পরীক্ষার ফলাফল মেইল করে দাও।"
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "কোন বিষয়ে সতর্ক করার না থাকলে মেইল প্রেরণ করবে না"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "এটির মান হ্যাঁ হলে, আর.পি.এম. ডেটাবেসের ওপর কিছু পরীক্ষা চালাও।"
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "এটির মান হ্যাঁ হলে পরীক্ষার ফলাফল syslog-এ প্রেরণ করে।"
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "এটির মান হ্যাঁ হলে পরীক্ষার ফলাফল tty-এ প্রেরণ করে।"
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"শেল কমান্ডের ইতিহাস-তালিকার (History) আকার নির্দিষ্ট করো।  এর মান -১ হওয়ার অর্থ "
-"তালিকার কোন নির্দিষ্ট আকার নেই।"
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "শেল টাইম-আউট নির্দিষ্ট করো।  এর মান ০ হওয়ার অর্থ কোন টাইম-আউট নেই।"
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "টাইম-আউটের একক হল সেকেন্ড"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "ব্যবহারকারীর umask নির্দিষ্ট করো।"
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "ভূয়া IPv4 সমস্যাসূচক বার্তা অনুমোদন করো"
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "ব্রডকাস্ট আই.সি.এম.পি. ইকো অনুমোদন করো"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "আই.সি.এম.পি. ইকো অনুমোদন করো"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* বিদ্যমান"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "কনসোল ব্যবহারকারী কর্তৃক রিবুট"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "দূরবর্তী কম্পিউটার থেকে রুট অ্যাকাউন্টে লগ-ইন করা অনুমোদন করো"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "সরাসরি রুট অ্যাকাউন্টে লগ-ইন"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-"ডিসপ্লে ব্যবস্থাপকে (কে.ডি.এম. ও জি.ডি.এম.) ব্যবহারকারীদের তালিকা প্রদর্শন করো"
-
-# সাম: Export =?
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr "root থেকে অন্য ব্যবহারকারীতে বদলানোর সময় ডিসপ্লে এক্সপোর্ট করো"
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "এক্স উইন্ডো সংযোগ অনুমোদন করো"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "এক্স উইন্ডোর সাথে টি.সি.পি. সংযোগ অনুমোদন করো"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "tcp_wrappers কর্তৃক নিয়ন্ত্রিত সকল সার্ভিস অনুমোদন করো"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Chkconfig, msec-এর নিয়মাবলী মেনে চলে"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "ব্যবহারকারীদের জন্য \"crontab\" ও \"at\" সক্রিয় করো"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "Syslog ১২ নং কনসোলে বার্তা পাঠায়"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "নেইম রেজলুশন স্পুফিং প্রতিরক্ষা"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "আই.পি. স্পুফিং প্রতিরক্ষা ব্যবস্থা সক্রিয় করো"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "সিস্টেমে libsafe থাকলে তাকে সক্রিয় করো"
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "IPv4-এর সন্দেহজনক প্যাকেট সম্পর্কে লগ রাখার ব্যবস্থা সক্রিয় করো"
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "প্রতিঘন্টায় msec নিরাপত্তা পরীক্ষা সক্রিয় করো"
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-"শুধুমাত্র wheel গ্রুপের সদস্যদের জন্য অথবা সকল ব্যবহারকারীর জন্য su ব্যবহারের সুযোগ "
-"সক্রিয় করো"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "ব্যবহারকারীর পরিচয় পরীক্ষার জন্য পাসওয়ার্ড ব্যবহার করো"
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "ইথারনেট কার্ডের বহুরূপীতা (Promiscuity) পরীক্ষা"
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "দৈনিক নিরাপত্তা পরীক্ষা"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "একক ব্যবহারের ক্ষেত্রে sulogin(8)"
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "এটির জণ্য পাসওয়ার্ডের বয়স বৃদ্ধি ঘটবে না"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr "পাসওয়ার্ড বাতিলকরণ ও অ্যাকাউন্ট নিষ্ক্রিয়করণের সময়সীমা নির্দিষ্ট করুন"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "পুরনো পাসওয়ার্ডের তালিকার দৈর্ঘ্য"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "পাসওয়ার্ডের সর্বনিম্ন দৈর্ঘ্য ও এতে অবস্থিত অঙ্ক ও বড় হাতের অক্ষরের সংখ্যা"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "রুট-এর umask"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "শেল চালিত পুরনো কমান্ডের তালিকার আকার"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "শেল টাইম-আউট"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "ব্যবহারকারীর umask"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "উন্মুক্ত পোর্ট আছে কিনা পরীক্ষা করো"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "অনিরাপদ অ্যাকাউন্ট আছে কিনা পরীক্ষা করো"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "ব্যবহারকারীর ব্যক্তিগত ডিরেক্টরিতে অবস্থিত ফাইলের অনুমতি পরীক্ষা করো"
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "নেটওয়ার্ক ডিভাইসসমূহ প্রমিসকাস (Pormiscuous) মোডে আছে কিনা তা পরীক্ষা করো"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "দৈনিক নিরাপত্তা পরীক্ষা চালাও"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "sgid ফাইলের অন্তর্ভুক্তি/অপসারণ পরীক্ষা করো"
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "/etc/shadow ফাইলে ফাঁকা পাসওয়ার্ডের উপস্থিতি পরীক্ষা করো"
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "suid/sgid ফাইলের চেকসাম (Checksum) পরীক্ষা করো"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "suid রুট ফাইলের অন্তর্ভুক্তি/অপসারণ পরীক্ষা করো"
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "মালিকানাবিহীন ফাইলের উপস্থিতি জানাও"
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "সকলের পরিবর্তনযোগ্য ফাইল/ডিরেক্টরি আছে কিনা তা পরীক্ষা করো"
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "chkrootkit পরীক্ষা চালাও"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "অপ্রয়োজনে মেইল প্রেরণ করবে না"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"এটিতে টিকে দেওয়া থাকলে, এই ই-মেইল ঠিকানায় অথবা রুট-এর নিকট মেইলের মাধ্যমে "
-"রিপোর্ট প্রেরণ করো"
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "মেইলের সাহায্যে পরীক্ষার ফলাফল জানাও"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "আর.পি.এম. ডেটাবেসের ওপর কিছু পরীক্ষা চালাও"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "syslog-কে পরীক্ষার ফলাফল জানাও"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "tty-এ পরীক্ষার ফলাফল লিখো"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "ক্র্যাকারগণকে স্বাগতম"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "অপর্যাপ্ত"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "উন্নত"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "অধিকতর উন্নত"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "মাত্রাতিরিক্ত"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"এই স্তরকে সতর্কতার সাথে ব্যবহার করতে হবে।  এটি সিস্টেমের ব্যবহার সহজ করে তুললেও, "
-"সিস্টেমের নিরাপত্তা\n"
-"হ্রাস করে।  ইন্টারনেটে বা অন্যান্য কম্পিউটারের সাথে যুক্ত সিস্টেমে এই স্তরে নিরাপত্তা "
-"ব্যবহার করা উচিত্‍ নয়।\n"
-"এক্ষেত্রে কোন পাসওয়ার্ড ব্যবহার করা হয় না।"
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"পাসওয়ার্ড ব্যবস্থা এখন সক্রিয় হলেও, কম্পিউটারটিকে নেটওয়ার্কের সাথে যুক্ত না করার "
-"পরামর্শই দেওয়া যাচ্ছে।"
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"যে সব কম্পিউটার ক্লায়েন্ট হিসেবে ইন্টারনেটের সাথে যুক্ত হয়, তাদের সাধারণ নিরাপত্তার "
-"জন্য এই স্তরের নিরাপত্তা গ্রহণের পরামর্শ দেওয়া যাচ্ছে।"
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"ইতিমধ্যেই  কিছু সীমাবদ্ধতা আরোপ করা হয়েছে, এবং প্রতিরাতে স্বয়ংক্রিয়ভাবে আরো কিছু "
-"পরীক্ষা চালানো হবে।"
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"এই স্তরের নিরাপত্তা গ্রহণের মাধ্যমে সিস্টেমটিকে সার্ভার হিসেবে ব্যবহার করা নিরাপদ "
-"হয়ে ওঠেছে।\n"
-"যে পরিমাণ নিরাপত্তা ব্যবস্থা গ্রহণ করা হয়েছে তাতে সিস্টেমটি নিরাপদেই সার্ভার "
-"হিসেবে অসংখ্য ক্লায়েন্টের\n"
-"সাথে সংযোগ স্থাপন করতে পারবে।  বিশেষ দ্রষ্টব্য: যদি আপনার সিস্টেমটি ইন্টারনেটের "
-"সাথে শুধুই\n"
-"ক্লায়েন্ট হিসেবে যুক্ত হয়, তবে আরো নিম্ন স্তরের নিরাপত্তা বেছে নিন।"
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"এটি পূর্বতন স্তরের মতই, তবে সিস্টেমটি এখন সম্পূর্ণ রুদ্ধ এবং সর্বোচ্চ নিরাপত্তা স্তরে "
-"রয়েছে।"
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "ড্রেকসেক-এর প্রাথমিক অপশন"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "অনুগ্রহপূর্বক আকাঙ্খিত নিরাপত্তা মাত্রা বেছে নিন"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "নিরাপত্তা স্তর"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "সার্ভারের জন্য libsafe ব্যবহার করো"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "একটি লাইব্রেরি, যা বাফার ওভারফ্লো ও ফরমেট স্ট্রিং আক্রমণ প্রতিরোধ করে।"
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "নিরাপত্তা বিষয়ক অ্যাডমিনিস্ট্রেটর (লগ-ইন বা ই-মেইল)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA (Advanced Linux Sound Architecture) সাউন্ড সিস্টেম চালু করো"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "অ্যানাক্রোন একটি পর্যায়ক্রমিক কমান্ড শিডিউলার (Scheduler) ।"
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"ব্যাটারির অবস্থা পর্যবেক্ষণ এবং পর্যবেক্ষণলব্ধ তথ্য syslog ব্যবহার করে সংরক্ষণ করার "
-"জন্য apmd ব্যবহার করা হয়।\n"
-"এছাড়া ব্যাটারির চার্জ কমে গেলে কম্পিউটার বন্ধ করার কাজেও এটি ব্যবহার করা যায়।"
-
-# সাম: batch = ?
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"at কমান্ড দিয়ে শিডিউলকৃত কমান্ডগুলো নির্ধারিত সময়ে চালাবে, এবং যখন গড় চাপ\n"
-"যথেষ্ট কম থাকে, তখন batch কমান্ডগুলো চালাবে।"
-
-# সাম
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron একটি আদর্শ UNIX প্রোগ্রাম যা কিনা ব্যবহারকারী‌-নির্দশিত প্রোগ্রামসমূহ নিয়মিত\n"
-"ও নির্ধারিত সময়ে চালনা করে। vixie cron, মৌলিক UNIX cron এর সাথে আরও কিছু\n"
-"বৈশিষ্ট যোগ করে, যেমন উন্নত নিরাপত্তা ও শক্তিশালী কনফিগারেশন অপশনসমূহ।"
-
-# সাম
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"FAM একটি ফাইল পর্যবেক্ষণ daemon। এটি ফাইলে কোন পরিবর্তন হলে তার রিপোর্ট পেতে "
-"ব্যবহৃত হয়।\n"
-"GNOME এবং KDE এটি ব্যবহার করে থাকে"
-
-# সাম
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander এর মত টেক্সট‌-নির্ভর Linux অ্যাপলিকেশনসমূহে\n"
-"মাউস সাপোর্ট যোগ করে। এটি দিয়ে মাউস-নির্ভর কনসোল কাটো-ও-সাঁটো অপারেশন সম্ভব হয় "
-"এবং এটি কনসোলে\n"
-" পপ-আপ মেনুও সমর্থন করে।"
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"হার্ডড্রেক একটি হার্ডওয়ার সনাক্তকারক চালায়\n"
-"এবং কখনো কখনো নতুন/পরিবর্তিত হার্ডওয়ার কনফিগার করে।"
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"অ্যাপাচি একটি ওয়ার্ল্ড ওয়াইড ওয়েব সার্ভার।  এটি এইচ.টি.এম.এল. ফাইল ও সি.জি.আই. "
-"পরিবেশনে ব্যবহৃত হয়।"
-
-# সাম
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"ইন্টারনেট সুপারসার্ভার daemon (সাধারণত বলা হয় inetd) প্রয়োজন অনুযায়ী\n"
-"বিভিন্ন ইন্টারনেট সার্ভিস শুরু করে। এটির অধীনে অনেক সার্ভিস চালু হয়,\n"
-"যেমন telnet, ftp, rsh, এবং rlogin। inetd নিষ্ক্রিয় করলে এটির অধীনে থাকা\n"
-"সব সার্ভিস বন্ধ হয়ে যাবে।"
-
-# সাম
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"লিনাক্স কার্নেল ২.২ এর জন্য প্যাকেট শোধন শুরু করুন, যা কিনা\n"
-"একটি ফায়ারওয়াল সেটআপ করে আপনার মেশিনকে নেটওয়ার্কের আক্রমন থেকে রক্ষা করবে।"
-
-# সাম
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"এই প্যাকেজটি /etc/sysconfig/keyboard এ সেট করা নির্বাচিত কীবোর্ড\n"
-"ম্যাপটি লোড করে। kbdconfig ইউটিলিটি ব্যবহার করে এটি নির্বাচন করা যেতে পারে।\n"
-"বেশিরভাগ মেশিনের জন্য আপনার এটি সক্রিয় রাখা উচিত।"
-
-# সাম: সিওর না।
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"/boot এ /usr/include/linux/{autoconf,version}.h এর জন্য\n"
-"কার্নেল হেডারের স্বয়ংক্রিয় পুনর্সম্পাদন"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "বুট হওয়ার সময় স্বয়ংক্রিয়ভাবে হার্ডওয়ার সনাক্তকরণ ও কনফিগারেশন।"
-
-# সাম
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf, বুটের সময় বিভিন্ন কাজের আয়োজন করে যাতে সিস্টেম\n"
-"কনফিগারেশন ঠিক থাকে।"
-
-# সাম
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd একটি প্রিন্ট daemon এবং lpr সঠিকভাবে কাজ করার জন্য প্রয়োজন। এটি মুলত\n"
-"একটি সার্ভার যা কিনা প্রিন্টিং এর কাজগুলো প্রিন্টারগুলোর মাঝে সঠিকভাবে বিতরণ করে।"
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"লিনাক্স ভার্চুয়াল সার্ভার উচ্চ কার্যসম্পন্ন এবং উচ্চ সুবিধা সম্পন্ন সার্ভার তৈরীতে\n"
-"ব্যবহৃত হয়।"
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) একটি ডোমেইন নাম সার্ভার (ডি.এন.এস.) যা হোস্ট-নাম থেকে আইপি ঠিকানা "
-"সমাধানে ব্যবহৃত হয়।"
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"সকল নেটওয়ার্ক ফাইল সিস্টেম (এন.এফ.এস.), এস.এম.বি. (ল্যান ব্যবস্থাপক/উইন্ডোজ),\n"
-"এবং এন.পি.সি. (নেটওয়ার) মাউন্ট অবস্থানকে মাউন্ট ও আনমাউন্ট করে।"
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"বুট হওয়ার সময় যে সব নেটওয়ার্ক ইন্টারফেস চালু করা হয়\n"
-"তাদের সকলকে সক্রিয়/নিষ্ক্রিয় করে।"
-
-# সাম
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS, TCP/IP নেটওয়ার্ক এর উপর ফাইল শেয়ার করার একটি জনপ্রিয় প্রোটকল।\n"
-"এই সার্ভিসটি NFS সার্ভারকে কর্মক্ষম করে, যা কিনা /etc/exports ফাইল দিয়ে\n"
-"কনফিগার করা হয়।"
-
-# সাম: functionality
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS, TCP/IP নেটওয়ার্ক এর উপর ফাইল শেয়ার করার একটি জনপ্রিয় প্রোটকল।\n"
-"এই সার্ভিসটি NFS ফাইল লকিং বৈশিষ্ট কর্মক্ষম করে।"
-
-# সাম
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"বুট এর সময়, console এবং Xorg এর অধীনে স্বয়ংক্রিয়ভাবে\n"
-"numlock কী লকার সক্রিয় করো।"
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w ও তার সাথে সংগতিপূর্ণ উইনপ্রিন্টার সমর্থন করে।"
-
-# সাম:
-# things  = ডিভাইস? 
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"PCMCIA সাপোর্ট সাধারণত ইথারনেট এবং ল্যাপটপের মোডেম জাতীয়\n"
-"ডিভাইস সমর্থন করে। এটি কনফিগার করা ছাড়া সক্রিয় হয় না, অতএব যেসব মেশিনে প্রয়োজন "
-"নেই\n"
-"সেখানেও এটি ইনস্টল করা যেতে পারে।"
-
-# সাম
-# portmap
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper টি RPC সংযোগ ব্যবস্থাপনায় নিয়োজিত, যটি NFS ও NIS এর\n"
-"মত প্রোটকলগুলোব্যবহার করে থাকে। যেসব মেশিন RPC পদ্ধতি ব্যবহার করে এমন প্রোটকলের\n"
-"সার্ভার হিসেবে কাজ করে, সেসব মেশিনে portmap সার্ভারটি চালু থাকতে হবে।"
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"পোস্টফিক্স একটি মেইল ট্রান্সপোর্ট এজেন্ট, এটি এমন একটি প্রোগ্রাম যা এক কম্পিউটার থেকে "
-"অন্য কম্পিউটারে মেইল স্থানান্তর করে।"
-
-# সাম
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"উন্নততর অনিয়মিত সংখ্যা উত্‍পাদনের জন্য সিস্টেম এনট্রোপি পুল সংরক্ষণ\n"
-"ও পুনরুদ্ধার করে। "
-
-# সাম
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Oracle বা DVD প্লেয়ার অ্যাপ্লিকেশন ব্যবহার করার জন্য, raw ডিভাইসগুলোকে ব্লক ডিভাইস"
-"(যেমন হার্ড ড্রাইভ পার্টিশনসমূহ) হিসেবে নির্দিষ্ট করে দিন।"
-
-# সাম
-# routed translated as রাউটেড
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"রাউটেড daemon টি স্বয়ংক্রিয় IP রাউটার টেবিল, RIP প্রোটকল দ্বারা আপডেট করতে "
-"সাহায্য করে। যদিও RIP প্রোটকল ছোট নেটওয়ার্কের জন্য বহুল ব্যবহৃত, জটিল নেটওয়ার্কের "
-"জন্য আরও জটিল রাউটিং প্রোটকল প্রয়োজন।"
-
-# সাম
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat প্রোটোকলটি নেটওয়ার্ক ব্যবহারকারীদের ঐ নেটওয়ার্কে অবস্থিত\n"
-" যেকোন মেশিনের কার্যক্ষমতা সম্পর্কীয় পরিমাপকগুলো পেতে সাহায্য করে। "
-
-# সাম
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers প্রোটকলটি নেটওয়ার্ক ব্যবহারকারীদের অন্যান্য সংযুক্ত মেশিনের\n"
-"লগকৃত ব্যবহারকারীদের সনাক্ত করতে সাহায্য করে।"
-
-# সাম
-# প্রোটকল 
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"rwho প্রোটোকলটি রিমোট ব্যবহারকারীদেরকে, rwho daemon (finger এর মত) চালাচ্ছে এমন "
-"মেশিনে লগইন করা ব্যবহারকারীদের একটি তালিকা দেয়।"
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "আপনার কম্পিউটারের সাউন্ড সিস্টেম চালু করে"
-
-# সাম
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog ব্যবহার করে daemon সমূহ বিভিন্ন সিস্টেম লগ ফাইলে লগ বার্তা\n"
-"লিখে থাকে। অতএব, সবসময় Syslog চালিয়ে রাখা ভালো।"
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "ইউ.এস.বি. ডিভাইসের ড্রাইভার লোড করে।"
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "এক্স ফন্ট সার্ভার চালু করে (Xorg চালানোর জন্য এটি বাধ্যতামূলক)।"
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "বুট হওয়ার সময় যে সব সার্ভিস স্বয়ংক্রিয়ভাবে চালু হবে তাদের বেছে নিন"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "প্রিন্টিং"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "ইন্টারনেট"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "ফাইল শেয়ারকরণ"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "দূর-নিয়ন্ত্রিত অ্যাডমিনিস্ট্রেশন"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "ডেটাবেস সার্ভার"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "চলন্ত"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "স্থগিত"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "সার্ভিসসমূহ এবং ড্যেমনসমূহ"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"দুঃখিত, এই সার্ভিসটি সম্পর্কে\n"
-"অতিরিক্ত আর কোন তথ্য নেই।"
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "তথ্য"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "অনুরোধের ভিত্তিতে সচল করো"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "বুট করার সময় চালু করো"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "আরম্ভ"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "বন্ধ"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>ম্যান্ড্রিব কলিনাক্স কি?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "<b>ম্যান্ড্রিব কলিনাক্স</b>-এ আপনাকে স্বাগতম!"
-
-# সাম
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-"Mandriva Linux একটি <b>লিনাক্স ডিস্ট্রিবিউশন</b> যা গঠিত হয়েছে সিস্টেম মূল অংশ বা "
-"<b>অপারেটিং সিস্টেম</b> (লিনাক্স কার্নেল এর উপর ভিত্তি করে) এবং <b>বিভিন্ন অনেক "
-"অ্যাপ্লিকেশন</b> দিয়ে যা কিনা আপনার সম্ভাব্য সব চাহিদা পূরন করে।"
-
-# সাম
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"Mandriva Linux আজকের সবচেয়ে <b>ব্যবহারকারীর বন্ধুসূলভ</b> লিনাক্স ডিস্ট্রিবিউশন। "
-"এটি পৃথিবীর সবচেয়ে <b>বহুল-ব্যবহৃত</b> লিনাক্স ডিস্ট্রিবিউশনের মধ্যে অন্যতম!"
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>উন্মুক্ত সোর্স</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "<b>উন্মুক্ত সোর্সের পৃথিবী</b> তে স্বাগতম!"
-
-# sam
-# release = প্রকাশ?
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"Mandriva Linux উন্মুক্ত সোর্স মডেলে প্রতিশ্রুতিবদ্ধ। এর অর্থ, এই নতুন রিলিজটি "
-"<b>Mandriva এর ডেভেলপমেন্ট টিম</b> এবং <b>বিশ্বব্যাপী কমিউনিটির</b> "
-"<b>সহযোগিতার</b> ফসল।"
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-"এই সর্বশেষ সংস্করণের উন্নয়ন প্রক্রিয়ায় যারা অংশগ্রহণ করেছেন তাদের প্রত্যেককে আমরা "
-"ধন্যবাদ জানাতে চাচ্ছি।"
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>জি-পি-এল</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-"ডিস্ট্রিবিউশন এবং ম্যান্ড্রিব লিনাক্স টুলসমূহের বেশিরভাগ সফ্‌টওয়্যার <b>General Public "
-"License</b> এর অধীনে লাইসেন্সকৃত।"
-
-# সাম
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-"GPL হচ্ছে উন্মুক্ত সোর্স মডেলের মূল চালিকাশক্তি; এটি সকলকে একটি সফ্টওয়্যার ব্যবহার, "
-"নিরীক্ষণ, বিতরণ, এবং উন্নতি সাধন করার <b>স্বাধীনতা</b> দেবে, যদি তার ফল প্রকাশ "
-"করার প্রতিশ্রুতি দেয়া হয়।"
-
-# সাম
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-"এই পদ্ধতির প্রধান সুবিধা হল, ডেভেলপারের সংখ্যা কার্যত: <b>অসীম</b>, যার ফলাফল "
-"<b>অতি উন্নত মানের</b> সফ্টওয়্যার।"
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>কমিউনিটিতে যোগ দিন</b>"
-
-# সাম
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-"Mandriva Linux এর আছে ব্যবহারকারী ও ডেভেলপারদের <b>সবচেয়ে বড় কমিউনিটি</b> "
-"গুলোর একটি। এই কমিউনিটির কার্যক্রমও অনেক বিস্তৃত, ত্রুটি রিপোর্ট করা থেকে নতুন "
-"অ্যাপলিকেশন তৈরী পর্যন্ত। এ কমিউনিটি Mandriva Linux এর ভুবনে অপরিহার্য ভুমিকা পালন "
-"করে।"
-
-# সাম
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-"এই সক্রিয় কমিউনিটি সম্পর্কে <b>আরও জানতে</b>, দেখুন <b>www.mandrivalinux.com</b> "
-"অথবা সরাসরি <b>www.mandrivalinux.com/en/cookerdevel.php3</b> যদি আপনি "
-"ডেভেলপমেন্টে <b>সম্পৃক্ত</b> হতে চান।"
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr "<b>ডাউনলোড সংস্করণ</b>"
-
-# সাম
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-"আপনি এখন <b>Mandriva Linux ডাউনলোড</b> ইনস্টল করছেন। এটি একটি ফ্রী ভার্সন যা "
-"কিনা Mandriva <b>সবার জন্য সহজলভ্য</b> রাখতে চায়।"
-
-# সাম
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-"ডাউনলোড ভার্সনে উন্মুক্ত সোর্স নয় এমন সব সফ্টওয়্যার <b>সংযোযিত নয়</b>। অতএব আপনি "
-"ডাউনলোড ভার্সনে পাচ্ছেন না:"
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-"\t* <b>প্রোপাইটারি ড্রাইভারসমূহ</b> (যেমন NVIDIA®, ATI™, ইত্যাদির জন্য ড্রাইভার।)।"
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-"\t* <b>প্রোপাইটারি সফ্‌টওয়্যার</b> (যেমন Acrobat® Reader®, RealPlayer®, Flash™, "
-"ইত্যাদি।)।"
-
-# সাম
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-"অনান্য Mandriva পণ্যেও <b>সংযোজিত সার্ভিসগুলো</b> আপনি ব্যবহার করতে পারবেন না।"
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr "<b>আবিষ্কার করুন, আপনার প্রথম লিনাক্স ডেস্কটপ</b>"
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr "আপনি এখন <b>ম্যান্ড্রিব লিনাস্ক আবিষ্কার</b> ইনস্টল করছেন।"
-
-# সাম:
-# task-oriented = ?
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery হচ্ছে সবচেয়ে <b>সহজ</b> এবং <b>ব্যবহারকারীর বন্ধুসূলভ</b> লিনাক্স "
-"ডিস্ট্রিবিউশন। এটিতে আছে অফিস, মাল্টিমিডিয়া এবং ইন্টারনেট কর্মকান্ডে ব্যবহারের জন্য "
-"বাছাইকৃত কিছু <b>মানসম্মত সফ্টওয়্যার</b>। এর মেনু task-oriented, প্রতিটি টাস্কের জন্য "
-"একটি অ্যাপ্লিকেশন।"
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr "<b>পাওয়ারপ্যাক, চূড়ান্ত লিনাক্স ডেস্কটপ</b>"
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr "আপনি এখন <b>ম্যান্ড্রিব লিনাক্স পাওয়ারপ্যাক</b> ইনস্টল করছেন।"
-
-# সাম
-# premier?
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-"PowerPack হচ্ছে Mandriva এর <b>premier লিনাক্স ডেস্কটপ</b> পণ্য। PowerPack এ আছে "
-"<b>হাজারেরও অধিক অ্যাপ্লিকেশন</b> - সবচেয়ে জনপ্রিয় থেকে শুরু করে সবচেয়ে উন্নত "
-"পর্যন্ত।"
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr "<b>পাওয়ারপ্যাক+, ডেস্কটপ এবং সার্ভারের জন্য লিনাক্স সমাধান</b>"
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr "আপনি এখন <b>ম্যান্ড্রিব লিনাক্স পাওয়ারপ্যা++</b> ইনস্টল করছেন।"
-
-# সাম 
-# full-featured = বৈশিষ্টপূর্ণ?
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-"PowerPack+ ছোট থেকে মধ্যম সাইজের <b>নেটওয়ার্কের</b> জন্য একটি <b>বৈশিষ্টপূর্ণ "
-"লিনাক্স সমাধান</b>। PowerPack+ এ আছে হাজারেরও অধিক <b>ডেস্কটপ অ্যাপ্লিকেশন</b> "
-"এবং কিছু অতি উন্নত সমন্বিত <b>সার্ভার অ্যাপ্লিকেশন</b>।"
-
-# সাম: Mandriva 
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Mandriva পণ্যসমূহ</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr "<b>ম্যান্ড্রিব সফ্‌ট</b> <b>ম্যান্ড্রিব লিনাক্স</b> প্রচুর প্রোডাক্ট তৈরী করেছে।"
-
-# সাম
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Mandriva Linux এর পণ্যসমূহ হলো:"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr "\t* <b>আবিষ্কার</b>, আপনার প্রথম লিনাক্স ডেস্কটপ।"
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr "\t* <b>পাওয়ারপ্যাক</b>, চূড়ান্ত লিনাক্স ডেস্কটপ।"
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr "\t* <b>পাওয়ারপ্যাক+</b>, ডেস্কটপ এবং সার্ভারের জন্য লিনাক্স সমাধান."
-
-# সাম
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-"\t* <b>x86-64 এর জন্য Mandriva Linux</b>, আপনার ৬৪‌-বিট প্রোসেসরের সব সম্ভবনাকে "
-"কাজে লাগানোর Mandriva Linux সমাধান। "
-
-# সাম
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr "<b>Mandriva পণ্যসমূহ (Nomad পণ্যসমূহ)</b>"
-
-# সাম
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-"Mandriva দুটি পণ্য তৈরী করেছে যা আপনাকে ইনস্টল করা ছাড়াই <b>যেকোন কম্পিউটারে</b> "
-"Mandriva Linux ব্যবহার করার সুযোগ দেবে। "
-
-# সাম
-# bootable = ?
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-"\t* <b>মুভ</b>, একটি Mandriva Linux ডিস্ট্রিবিউশন সম্পূর্ণভাবে একটি বুট CD-ROM থেকে "
-"চলতে পারে।"
-
-# সাম: ultra-compact = ?
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-"\t* <b>GlobeTrotter</b>, একটি Mandriva Linux ডিস্ট্রিবিউশন যা কিনা আলট্রা‌-"
-"কমপ্যাক্ট “LaCie মোবাইল হার্ড ড্রাইভ” এ পূর্ব-ইনস্টলকৃত।"
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "<b>ম্যান্ড্রিব সফ্‌ট প্রোডাক্টসমূহ (পেশাদারী সমাধান)</b>"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-"নিচের ম্যান্ড্রিব সফ্‌ট প্রোডাক্টসমূহ <b>পেশাদারী প্রয়োজন</b> মেটানোর জন্য ডিজাইন করা "
-"হয়েছে:"
-
-# সাম: Corporate = প্রাতিষ্ঠানিক লিখলাম...সিওর না।
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-"\t* <b>কর্পোরেট ডেস্কটপ</b>, ব্যবসা প্রতিষ্ঠানের উপযুক্ত Mandriva Linux ডেস্কটপ।"
-
-# সাম
-# প্রাতিষ্ঠানিক
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr "\t* <b>কর্পোরেট সার্ভার</b>, Mandriva Linux সার্ভার সমাধান।"
-
-# সাম
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr "\t* <b>একাধিক-নেটওয়ার্ক ফায়ারওয়াল</b>, Mandriva Linux নিরাপত্তা সমাধান।"
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>কে-ডি-ই'র পছন্দ</b>"
-
-# ব্যবহারকারীর বন্ধুসূলভ
-# ডেস্কটপ পরিবেশ
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-"Discovery এর মাধ্যমে আপনি পরিচিত হবেন <b>KDE</b> এর সাথে, যটি সবচেয়ে উন্নত এবং "
-"ব্যবহারকারী বন্ধুসূলভ <b>গ্রাফিক্যাল ডেস্কটপ পরিবেশ</b>।"
-
-# সাম: :P
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-"KDE আপনার Linux প্রশিক্ষণের <b>প্রথম ধাপগুলো</b> এত সহজ করে তুলবে যে আপনি অন্য কোন "
-"অপারেটিং সিস্টেমের কথা চিন্তাই করবেন না!"
-
-# সাম
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-"KDE তে আরও আছে অনেক <b>সমন্বিত অ্যাপ্লিকেশন</b>, যেমন ওয়েব ব্রাউজার Konqueror, "
-"এবং ব্যক্তিগত তথ্য ব্যবস্থাপক Kontact।"
-
-# সাম: প্রতিবেশ = পরিবেশ।
-# ডেস্কটপ  পরিবেশ doesn't sound good.
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>আপনার পছন্দনীয় ডেস্কটপ পরিবেশ বেছে নিন</b>"
-
-# সাম
-# ডেস্কটপ পরিবেশ
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"PowerPack এর মাধ্যমে আপনি আপনার পচ্ছন্দ অনুযায়ী <b>গ্রাফিক্যাল ডেস্কটপ পরিবেশ<b> "
-"বেছে নিতে পারবেন। Mandriva এর জন্য ডিফল্ট <b>KDE</b>। "
-
-# সাম
-# ব্যবহারকারীর বন্ধুসূলভ
-# ডেস্কটপ পরিবেশ
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-"KDE হচ্ছে <b>সবচেয়ে উন্নত</b> এবং <b>ব্যবহারকারী বন্ধুসূলভ</b> গ্রাফিক্যাল ডেস্কটপ "
-"পরিবেশ। এতে অনেক সমন্বিত অ্যাপ্লিকেশনসমূহ আছে।"
-
-# সাম
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-"কিন্তু আমাদের মতে আপনি সবগুলোই ব্যবহার করে দেখুন (যেমন <b>GNOME</b>, <b>IceWM</b> "
-"ইত্যাদি) এবং আপনার পচ্ছন্দেরটি বেছে নিন।"
-
-# ডেস্কটপ পরিবেশ
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"PowerPack এর মাধ্যমে আপনি আপনার পচ্ছনুযায়ী <b>গ্রাফিক্যাল ডেস্কটপ পরিবেশ</b> বেছে "
-"নিতে পারবেন। Mandriva এর জন্য ডিফল্ট হচ্ছে <b>KDE</b>। "
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "<b>OpenOffice.org</b>"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr "আবিষ্কারের সাথে সাথে, আপনি <b>OpenOffice.org</b> আবিষ্কার করবেন।"
-
-# সাম
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-"এটি একটি <b>সম্পূর্ণ office suite</b> যাতে ওয়ার্ড প্রোসেসর, স্প্রেডশীট, প্রেজেন্টেশন "
-"এবং অংকন সফ্টওয়্যারসমূহ রয়েছে।"
-
-# সাম
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-"OpenOffice.org প্রায় সব ধরনের <b>Microsoft® Office</b> ডকুমেন্ট পড়তে ও তৈরী "
-"করতে পারে, যেমন Word, Excel এবং PowerPoint® ফাইলসমূহ।"
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-# সাম
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-"Discovery তে সংযোজিত আছে <b>Kontact</b>, নতুন KDE <b>গ্রুপওয়্যার সমাধান</b>।"
-
-# সাম
-# address book
-# বৈশিষ্টপূর্ণ
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"একটি বৈশিষ্টপূর্ণ <b>ই‌মেইল ক্লায়েন্ট</b> ছাড়াও, Kontact এ আছে <b>অ্যাড্রেস বুক</b>, "
-"একটি <b>ক্যালেন্ডার</b>, এবং একটি <b>নোট</b> নেবার টুল!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-"এটি হচ্ছে আপনার সম্পর্কিত লোকদের সাথে যোগাযোগের এবং আপনার সময় ঘুছিয়ে রাখার সহজতম "
-"পন্থা।"
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>ইন্টারনেট সার্ফ করুন</b>"
-
-# সাম: resource is translated elsewhere as  রিসোর্স
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr "Discovery আপনাকে দেবে <b>প্রতিটি ইন্টারনেট রিসোর্স</b>ব্যবহারের সুবিধা: "
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* Konqueror দিয়ে <b>ওয়েব</b> ব্রাউজ করুন।"
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr "\t* Kopete ব্যবহার করে অনলাইনে আপনার বন্ধুদের সাথে <b>চ্যাট করুন</b>।"
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "\t* KBear দিয়ে ফাইল <b>আদান-প্রদান</b> করুন।"
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr "<b>আমাদের মাল্টিমিডিয়া সুবিধাগুলো উপভোগ করুন</b>"
-
-# সাম
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr "Discovery আপনার জন্য <b>মাল্টিমিডিয়া</b> আরও সহজ করে তুলবে:"
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr "\t* Kaffeine দিয়ে আপনার প্রিয় <b>ভিডিওসমূহ</b> দেখুন।"
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr "\t* amaroK দিয়ে আপনার <b>গানের ফাইলগুলো</b> শুনুন।"
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* GIMP দিয়ে <b>ছবিসমূহ</b> সম্পাদনা এবং তৈরী করুন।"
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr "<b>অ্যাপ্লিকেশনের বিশাল সীমা উপভোগ করুন</b>"
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"ম্যান্ড্রিব লিনাক্স মেনু'তে <b>আপনার সকল কাজসমূহ</b> এর জন্য আপনি </b>সহজে-ব্যবহার্য</"
-"b> এপ্লিকেশনসমূহ খুঁজে পাবেন:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-"\t* <b>OpenOffice.org</b> দিয়ে অফিস ডকুমেন্টগুলো তৈরী, সম্পাদনা এবং শেয়ার করুন।"
-
-# সাম: personal information suites = ?
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* আপনার ব্যক্তিগত তথ্য <b>Kontact</b> এবং <b>Evolution</b> এর মত সমন্বিত "
-"personal information suite দিয়ে রক্ষণাবেক্ষন করুন।"
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr "\t* <b>Mozilla</b> এবং <b>Konqueror</b> দিয়ে ওয়েব ব্রাউজ করুন।"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* <b>Kopete</b> দিয়ে অনলাইন চ্যাটে অংশগ্রহণ করুন।"
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* আপনার <b>অডিও সিডি</b> এবং <b>গানের ফাইল</b> শুনুন, আপনার <b>ভিডিওসমূহ</b> "
-"দেখুন।"
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* <b>GIMP</b> দিয়ে ছবিসমূহ সম্পাদনা এবং তৈরী করুন।"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>উন্নয়ন এর পরিবেশ</b>"
-
-# সাম
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr "PowerPack আপনাকে দিচ্ছে আ্যপলিকেশন <b>ডেভেলপ</b> এর সর্বোত্তম সরঞ্জাম।"
-
-# সাম
-# সমন্বিত অ্যাপ্লিকেশন
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-"আপনি KDE এর শক্তিশালী ও সমন্বিত ডেভেলপমেন্ট পরিবেশ <b>KDevelop</b> উপভোগ করবেন, "
-"যেটি আপনাকে বিভিন্ন অনেক ভাষায় প্রোগ্রাম করার সুযোগ দেবে।"
-
-# সাম
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-"PowerPack এর সাথে আরও পেতে পারেন <b>GCC</b>, Linux এর প্রধান কমপাইলার এবং "
-"<b>GDB</b>, এর সংশ্লিষ্ট ডিবাগার।"
-
-# সাম: Development = ? পরিবর্ধন, উন্নয়ন
-# সফ্টওয়্যার তৈরী সম্পাদক
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>ডেভেলপমেন্ট এডিটর সমুহ</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr "PowerPack আপনাকে <b>জনপ্রিয় এডিটরগুলো</b> বেছে নেয়ার সুযোগ দেবে:"
-
-# সাম: real time = ?
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: একটি স্বনির্বাচিত এবং রিয়েল টাইম ডিসপ্লে এডিটর।"
-
-# সাম
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-"\t* <b>XEmacs</b>: আরও একটি উন্মুক্ত সোর্স টেক্সট এডিটর এবং অ্যাপলিকেশন তৈরী "
-"সিস্টেম।"
-
-# সাম
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-"\t* <b>Vim</b>: সাধারণ Vi এর চেয়ে বেশি সুবিধা সম্পন্ন একটি উন্নত টেক্সট এডিটর।"
-
-# সাম
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>ডেভেলপমেন্ট এর ভাষাসমূহ</b>"
-
-# সাম
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-"এসব <b>শক্তিশালী টুল</b> দিয়ে, আপনি <b>ডজন খানেক প্রোগ্রামিং ভাষায় অ্যাপ্লিকেশন "
-"লিখতে পারবেন</b>:"
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr "\t* জনপ্রিয় <b>সি ভাষা</b>"
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr "\t* অবজেক্ট ওরিয়েন্টেড ভাষা:"
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>জাভা (Java™)</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr "\t* স্ক্রিপ্টিং ভাষাসমূহ:"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr "\t* আরও অনেক কিছু।"
-
-# সাম: Development ?
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>ডেভেলপমেন্ট টুল</b>"
-
-# সাম
-# সমন্বিত অ্যাপ্লিকেশন
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-"সমন্বিত ডেভেলপমেন্ট পরিবেশ <b>KDevelop</b> এবং প্রধান লিনাক্স কম্পাইলার <b>GCC</"
-"b> দিয়ে আপনি <b>বিভিন্ন অনেক ভাষায়</b> অ্যাপ্লিকেশন তৈরী করতে পারবেন (C, C++, "
-"Java™, Perl, Python ইত্যাদি)।"
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>গ্রুপওয়্যার সার্ভার</b>"
-
-# সাম
-# বৈশিষ্টপূর্ণ
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-"PowerPack+ মাধ্যমে আপনি বৈশিষ্টপূর্ণ <b>গ্রুপওয়্যার সার্ভার</b> <b>Kolab</b> "
-"ব্যবহারের সুযোগ পাবেন। এর অনেকটা কৃতিত্ব <b>Kontact</b> ক্লায়েন্টের, এবং এটি দিয়ে "
-"আপনি পারছেন:"
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* আপনার <b>ই-মেইলসমূহ</b> পাঠান এবং গ্রহণ করুন।"
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr "\t* আপনার <b>এজেন্ডাসমূহ</b> এবং আপনার <b>ঠিকানার বইসমূহ</b> শেয়ার করুন।"
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr "\t* আপনার <b>মেমোসমূহ</b> এবং <b>কার্যতালিকাসমূহ</b> ম্যানেজ করুন।"
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>সার্ভার</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-"আপনার ব্যবসায়িক নেটওয়ার্ককে <b>প্রিমিয়ার সার্ভার সলুশন</b> দিয়ে সজ্জিত করুন; এতে "
-"রয়েছে:"
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-"\t* <b>Samba</b>: মাইক্রোসফ্‌ট® উইন্ডোজ® ক্লায়েন্টদের জন্য ফাইল এবং প্রিন্ট সার্ভিস।"
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: সর্বাপেক্ষা বেশি ব্যবহৃত ওয়েব সার্ভার।"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-"\t* <b>MySQL</b> এবং <b>PostgreSQL</b>: পৃথিবীর সর্বাপেক্ষা জনপ্রিয়তম উন্মুক্ত "
-"সোর্সের ডাটাবেজসমূহ।"
-
-# সাম: Concurrent = সমবর্তী? 
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: কনকারেন্ট ভার্সন সিস্টেম, প্রধান উন্মুক্ত সোর্স নেটওয়ার্ক‌-স্বচ্ছ ভার্সন "
-"নিয়ন্ত্রণ সিস্টেম।"
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-"\t* <b>ProFTPD</b>: উচ্চ কন্‌ফিগারকৃত জি-পি-এল লাইসেন্সপ্রাপ্ত এফ-টি-পি সার্ভার "
-"সফ্‌টওয়্যার।"
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-"\t* <b>Postfix</b> এবং <b>Sendmail</b>: জনপ্রিয় এবং শক্তিশালী মেইল সার্ভার।"
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>ম্যান্ড্রিব -লিনাক্স নিয়ন্ত্রণ কেন্দ্র</b>"
-
-# সাম
-# নিয়ন্ত্রণ কেন্দ্র
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"<b>Mandriva Linux নিয়ন্ত্রণ কেন্দ্র</b> একটি Mandriva Linux-সম্পর্কিত মৌলিক "
-"ইউটিলিটির সমষ্টি যা কিনা আপনার কম্পিউটারের কনফিগারেশন সহজ করে তোলে।  "
-
-# সাম
-# নিরাপত্তা স্তর
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-"আপনি <b>আপনার সিস্টেম সহজে কনফিগার করার জন্য</b> এই <b>৬০ এর অধিক</b> দরকারী "
-"ইউটিলিটির এই কালেকশনটির সুবিধা সাথে সাথে উপলব্ধি করতে পারবেন: আপনার কম্পিউটারের "
-"হার্ডওয়্যার ডিভাইস, মাউন্ট পয়েন্ট, নেটওয়ার্ক এবং ইন্টারনেট, নিরাপত্তা স্তর, "
-"ইত্যাদি।   "
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>উন্মুক্ত সোর্সের মডেল</b>"
-
-# সাম
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-"সব কম্পিউটার প্রোগ্রামিং এর মতই, উন্মুক্ত সোর্স সফ্টওয়্যার ডেভেলপমেন্টেও প্রয়োজন <b>সময় "
-"এবং লোকবল</b>। উন্মুক্ত সোর্স ধারনাটির সমর্থনে এবং <b>Mandriva Linux উন্নততর করার "
-"উদ্দেশ্যে</b> Mandriva মূল্য সংযোজিত পণ্য ও সেবা বিক্রয় করে থাকে। আপনি যদি এই "
-"প্রচেষ্টায় সাহায্য করতে চান তবে <b>অনুগ্রহ করে</b> আমাদের যেকোন পণ্য বা সেবা ক্রয় "
-"করুন!"
-
-# সাম: নাকি স্টোর?
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>অনলাইন বিপনীকেন্দ্র</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"ম্যনড্রেকসফ্‌টের প্রোডাক্টসমূহ এবং সার্ভিস সম্বন্ধে জ্ঞানার্জনের জন্য, আপনি আমাদের <b>ই-"
-"কমার্স প্লাটফর্ম</b> এ ঘুরে আসতে পারেন।"
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-"যেখানে আপনি আপনার সকল প্রোডাক্ট, সার্ভিস এবং ৩য়-পার্টির প্রোডাক্টসমূহের পেতে পারেন।"
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-"এই প্লাটফর্মটি এর দ্রুততা এবং ব্যবহার যোগ্যতা বাড়ানোর জন্য <b>পুনরায় ডিজাইন করা</"
-"b>হয়েছে।"
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "আজ <b>store.mandriva.com</b> এ থেমে যান!"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>ম্যান্ড্রিব ক্লাব</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-"<b>ম্যান্ড্রিব ক্লাব</b> আপনার ম্যান্ড্রিব লিনাক্স প্রোডাক্টের <b>সঠিক সংগী</b>.."
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr "ম্যান্ড্রিব ক্লাবে যোগ দিয়ে <b>মূল্যবান উপকারসমূহের</b> সুবিধা নিন, যেমন:"
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-"\t* আমাদের অনলাইন <b>store.mandriva.com</b> স্টোরের প্রোডাক্টসমূহ এবং "
-"সার্ভিসসমূহে<b>বিশেষ মূল্যহ্রাস</b>।"
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-"\t* <b>বাণিজ্যিক অ্যাপ্লিকেশন</b>এ প্রবেশ (উদাহরণস্বরুপ NVIDIA® বা ATI™ ড্রাইভারসমূহ)"
-"।"
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* ম্যান্ড্রিব লিনাক্স <b>ব্যবহারকারীদের ফোরাম</b> এ অংশগ্রহণ।"
-
-# সাম
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-"\t* Mandriva Linux <b>ISO ইমেজগুলো</b>, <b>নির্ধারিত সময়ের পূর্বেই</b>, পাওয়ার "
-"বিশেষ সুবিধা।"
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>ম্যান্ড্রিব অনলাইন (Mandriva Online)</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-"<b>ম্যান্ড্রিব অনলাইন</b> হচ্ছে একটি নতুন প্রিমিয়াম সার্ভিস যা ম্যান্ড্রিব সফ্‌ট তার "
-"ক্রেতাদের  দিতে পেরে গর্বিত!"
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-"ম্যান্ড্রিব অনলাইন আপনার ম্যান্ড্রিব লিনাক্স সিস্টেমের জন্য <b>সহজে আপডেট</b> এর জন্য "
-"বিশাল সীমানার গুরুত্বপূর্ণ সার্ভিস:"
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr "\t* <b>সঠিক</b> সিস্টেম নিরাপত্তা (স্বয়ংক্রিয় সফ্‌টওয়্যার আপডেট)।"
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-"\t* আপডেটের <b>বিজ্ঞপ্তিপত্র</b> (ই-মেইলের মাধ্যমে বা ডেস্কটপের কোন একটি "
-"অ্যাপলেটের মাধ্যমে)।"
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr "\t* নমনীয় <b>রুটিনমাফিক</b> আপডেটসমূহ।"
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-"\t* একটি অ্যাকাউন্ট দিয়ে <b>আপনার সম্পূর্ণ ম্যান্ড্রিব লিনাক্স সিস্টেমের</b> "
-"ম্যানেজমেন্ট।"
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-"আপনার কি কোন <b>সহযোগিতা</b> প্রয়োজন? www.mandrivaexpert.com এর  <b>আমাদের "
-"প্রযুক্তিগত সহায়তা প্লাটফর্ম</b> এ ম্যান্ড্রিব সফ্‌টের অভিজ্ঞ প্রযুক্তিবিদদের সাথে যোগাযোগ "
-"করুন।"
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-"<b>যোগ্যতাসম্পন্ন অভিজ্ঞ ম্যান্ড্রিব লিনাক্স ব্যবহারকারীদের</b> সাহায্যের জন্য ধন্যবাদ, "
-"আপনি অনেক সময় রক্ষা করবেন।"
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-"ম্যান্ড্রিব লিনাক্স সম্পর্কিত কোন প্রশ্নের জন্য, আপনাকে <b>store.mandriva.com</b> "
-"থেকে সকল প্রকার সহায়তা নিতে হবে।"
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "অফিস ওয়ার্কষ্টেশন"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"অফিস প্রোগ্রামসমূহ: ওয়ার্ডপ্রসেসর (OpenOffice.org Writer, Kword), স্প্রেডসিট "
-"(OpenOffice.org Calc, Kspread), PDF ফাইল প্রদর্শক ইত্যাদী"
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"অফিস প্রোগ্রামসমূহ: ওয়ার্ডপ্রসেসর (kword, abiword), স্প্রেডসিট (kspread, gnumeric), "
-"PDF ফাইল প্রদর্শক ইত্যাদী"
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "গেশ ষ্টেশন"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "উদ্দীপনামূলক প্রোগ্রামসমূহ: আর্কেড, বোর্ড, স্ট্রেটেজি, ইত্যাদি"
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "মাল্টিমিডিয়া ষ্টেশন"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "সাউন্ড এবং ভিডিও দেখার/এডিট করার প্রোগ্রামসমূহ"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "ইন্টারনেট ষ্টেশন"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"মেইল আদানপ্রদান, খবর পড়া এবং ওয়েব ব্রাউজিং (mutt, tin..) এর জন্য কিছু টুলের সেট"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "নেটওয়ার্ক কম্পিউটার (ক্লাইন্ট)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "SSH সহ বিভিন্ন প্রোটকলের জন্য ক্লাইন্টসমূহ"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "কনফিগারেশন"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "আপনার কম্পিউটারের কনফিগারেশন সহজ করার জন্য কিছু টুল"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "কনসল টুল"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "এডিটর, শেল, ফাইল টুল, টার্মিনাল সমূহ"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C এবং C++ ডেভলপমেন্টের লাইব্রেরী, প্রগ্রাম এবং include ফাইলসমূহ"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "ডকুমেন্টেশন"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "লিনাক্স এবং ফ্রী সফটওয়ার সংক্রান্ত বই ও হাউটু (HOWTO)"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "লিনাক্সের সাধারণ আধার। তৃতীয়পক্ষ এপ্লিকেশন সমূহের সাপোর্ট"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "এ্যপাচি"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "গ্রুপওয়্যার"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Kolab সার্ভার"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "ফায়ারওয়াল/রাউটার"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "ইন্টারনেট গেটওয়ে"
-
-# সাম
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "মেইল/সংবাদ"
-
-# সাম
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix মেইল সার্ভার, Inn সংবাদ সার্ভার"
-
-# সাম
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "ডিরেক্টরি সার্ভার"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "FTP সার্ভার"
-
-# সাম
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-# সাম
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "ডিএনএস/এনআইএস"
-
-# sam
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "ডোমেইন নেম এবং নেটওয়ার্ক ইনফরমেশন সার্ভার"
-
-# sam: 'sharing' is kept as it is because this is the server name.
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr "ফাইল এবং প্রিন্টার শেয়ারিং সার্ভার"
-
-# sam
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "NFS সার্ভার, Samba সার্ভার"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "ডেটাবেস"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "PostgreSQL অথবা MySQL ডেটাবেস সার্ভার"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "ওয়েব/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "এ্যপাচি, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "মেইল"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Postfix মেইল সার্ভার"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL অথবা MySQL ডেটাবেস সার্ভার"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "নেটওয়ার্ক কম্পিউটার সার্ভার"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS সার্ভার, SMB সার্ভার, Proxy সার্ভার, ssh সার্ভার"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "KDE ওয়ার্কষ্টেশন"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "K ডেক্সটপ, কিছু সহযোগীমূলক টুলের সমন্বয়ে একটি সাধারণ গ্রাফিকাল পরিবেশ"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "গুহনোম ওয়ার্কষ্টেশন"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"ব্যবহারকারীর বন্ধুসূলভ কিছু এপ্লিকেশন এবং ডোক্সটপ টুলের সমন্বয়ে একটি গ্রাফিকাল পরিবেশ"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "অন্যান্য গ্রাফিকাল ডেক্সটপ"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ইত্যাদী"
-
-# sam
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "ইউটিলিটিসমূহ"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "SSH সার্ভিস"
-
-# sam
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "ওয়েবমিন"
-
-# sam
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "ওয়েবমিন দূরবর্তী কনফিগারেশন সার্ভার"
-
-# sam
-#: share/compssUsers.pl:191
-#, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "নেটওয়ার্ক ইউটিলিটিসমূহ/পর্যবেক্ষণ"
-
-# সাম: context is not clear
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr "পর্যবেক্ষণ টুলসমূহ, হিসাবরক্ষণ প্রসেস করে, tcpdump, nmap, ..."
-
-# সাম
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "Mandriva উইজার্ডসমূহ"
-
-# সাম
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "সার্ভার কনফিগার করার জন্য উইজার্ডসমূহ"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"এটি একটি ফ্রী সফটওয়ার; ফ্রী সফটওয়ার ফাউন্ডেশন কর্তৃক প্রকাশিত জী-এন-ইউ জেনারেল "
-"পাবলিক লাইসেন্স-এর ২য় বা পরবর্তী\n"
-"কোন সংস্করণের (এটি আপনার ইচ্ছাধীন) শর্তাবলী অনুসরণ করে একে আপনি পুনঃবিতরণ এবং/"
-"অথবা পরিবর্তন করতে পারবেন।\n"
-"\n"
-"প্রোগ্রামটি এই আশায় বিতরণ করা হচ্ছে যে, এটি আপনার উপকারে আসবে, যদিও এ ব্যাপারে "
-"কোন নিশ্চয়তা প্রদান করা হচ্ছে না;\n"
-"এমনকি ক্রয়-বিক্রয় বা কোন বিশেষ কাজের ক্ষেত্রে প্রোগ্রামটির উপযুক্ততার ব্যাপারেও কোন "
-"নিশ্চয়তা প্রদান করা হচ্ছে না।\n"
-"বিস্তারিত জানার জন্য জী-এন-ইউ জেনারেল পাবলিক লাইসেন্স দেখুন।\n"
-"\n"
-"এই প্রোগ্রামের সাথে গনিউ জেনারেল পাবলিক লাইসেন্সের একটি প্রতিলিপি আপনার পাওয়ার "
-"কথা; কোন কারণে যদি তা না পেয়ে থাকেন, তবে এই ঠিকানায় লিখুন - Free Software "
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-# সাম
-# পুনরুদ্ধার 
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"ব্যাকআপ ও পুনরুদ্ধার অ্যাপ্লিকেশন\n"
-"\n"
-"--default             : ডিফল্ট ডিরেক্টরি সংরক্ষণ করো।\n"
-"--debug               : সব ডিবাগ বার্তা দেখাও।\n"
-"--show-conf           : সংরক্ষণ করতে হবে এমন ডিরেক্টরির তালিকা।\n"
-"--config-info         : কনফিগারেশন ফাইল অপশনসমূহ ব্যখ্যা কর (যারা X ব্যবহারকারী "
-"নয়)।\n"
-"--daemon              : daemon কনফিগারেশন ব্যবহার কর।\n"
-"--help                : এই ম্যাসেজটি দেখাও।\n"
-"--version             : ভার্সান নাম্বার দেখাও।\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"অপশনসমূহ:\n"
-"  --boot            - বুট লোডার কন্‌ফিগারে সক্রিয়\n"
-"  --splash          - বুট থিম কন্‌ফিগারে সক্রিয়\n"
-"ডিফল্ট মোড: স্বয়ংক্রিয়ভাবে কন্‌ফিগার হতে বলার মোড"
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[অপশনসমূহ] [প্রোগ্রামের নাম]\n"
-"\n"
-"অপশনসমূহ:\n"
-"  --help            - এই সহায়ক বার্তা ছাপাও\n"
-"  --report          - প্রোগ্রামটিকে কোন একটি ম্যান্ড্রিব লিনাক্স টুল হওয়া উচিত\n"
-"  --incident        - প্রোগ্রামটিকে কোন একটি ম্যান্ড্রিব লিনাক্স টুল হওয়া উচিত"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-"[--add]\n"
-"  --add             - \"একটি নেটওয়ার্ক ইন্টারফেস যুক্ত করো\" উইজার্ড\n"
-"  --del             - \"একটি নেটওয়ার্ক ইন্টারফেস মেছে ফেলো\" উইজার্ড\n"
-"  --skip-wizard     - সংযুক্তি ম্যানেজ করো\n"
-"  --internet        - ইন্টারনেট কন্‌ফিগার করো\n"
-"  --wizard          - --add এর মতো"
-
-# সাম:
-# and gs for ghostscript for only this one... 
-# did not translate "for only this one"...
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"ফন্ট ইমপোর্ট ও মনিটরিং অ্যাপ্লিকেশন\n"
-"\n"
-"অপশন:\n"
-"--windows_import : সব বিদ্যমান উইন্ডোজ পার্টিশন থেকে ইমপোর্ট করো।\n"
-"--xls_fonts      : xls থেকে যেসব ফন্ট আছে সেগুলো দেখাও\n"
-"--install        : যেকোন ফন্ট ফাইল বা ডিরেক্টরি গ্রহন করো।\n"
-"--uninstall      : যেকোন ফন্ট ফাইল বা ডিরেক্টরি আনইনস্টল করো।\n"
-"--replace        : যদি আগেই থেকে থাকে তবে সেই ফন্টগুলো প্রতিস্থাপন করো\n"
-"--application    : ০ কোন অ্যাপ্লিকেশন নয়।\n"
-"                 : ১ সব অ্যাপ্লিকেশন সমর্থন করো।\n"
-"                 : name_of_application staroffice এর জন্য so \n"
-"                 : এবং ghostscript এর জন্য gs।"
-
-# সাম
-# Mandriva Linux Terminal
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIONS]...\n"
-"Mandriva Linux টার্মিনাল সার্ভার কনফিগারকারী\n"
-"--enable        :MTS সক্রিয় করো\n"
-"--disable        : MTS নিষ্ক্রিয় করো\n"
-"--start           : MTS চালু করো\n"
-"--stop           : MTS বন্ধ করো\n"
-"--adduser       : MTS এ একটি ইতিমধ্যে তৈরী সিস্টেম ব্যবহারকারী যোগ করো "
-"(username প্রয়োজন)\n"
-"--deluser        : MTS থেকে একটি ইতিমধ্যে তৈরী সিস্টেম ব্যবহারকারী বাদ দাও "
-"(username প্রয়োজন)\n"
-"--addclient      : MTS এ একটি ক্লায়েন্ট মেশিন যোগ কর (MAC অ্যাড্রেস, IP, nbi "
-"ইমেজ নাম প্রয়োজন)\n"
-"--delclient      : MTS থেকে একটি ক্লায়েন্ট মেশিন বাদ দাও (MAC অ্যাড্রেস, IP, nbi "
-"ইমেজ নাম প্রয়োজন)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[কি-বোর্ড]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-
-# সাম
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"নেটওয়ার্ক ও ইন্টারনেট সংযোগ ও মনিটরিং অ্যাপ্লিকেশন\n"
-"\n"
-"--defaultintf interface : এই ইন্টারফেসটি ডিফল্ট ইন্টারফেস হিসেবে দেখাও\n"
-"--connect : ইন্টারনেট সংযুক্তি না থাকলে সংযুক্ত করো\n"
-"--disconnect : সংযুক্ত হয়ে থাকলে সংযোগ বিচ্ছিন্ন করো\n"
-"--force : (dis)connect এর সাথে ব্যবহৃত হয় : সংযুক্ত/বিচ্ছিন্ন হতে বাধ্য করো।\n"
-"--status : সংযুক্ত হলে ১ ও বিচ্ছিন্ন হলে ০ পাঠায়, তারপর বের হয়ে যায়।\n"
-"--quiet : ব্যবহারকারীর সাথে তথ্য আদান-প্রদান করো না। (dis)connect এর সাথে "
-"ব্যবহার করার জন্য।"
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-# সাম
-# verify 
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-"  --no-confirmation      Mandriva Update মোডে প্রথম নিশ্চিতকরন প্রশ্ন জিজ্ঞাসা "
-"করো না\n"
-"  --no-verify-rpm        প্যাকেজ স্বাক্ষর নিরীক্ষা করো না\n"
-"  --changelog-first      বর্ণনা উইন্ডোতে filelist এর আগে changelog দোখাও\n"
-"  --merge-all-rpmnew     প্রাপ্ত সকল .rpmnew/.rpmsave ফাইলগুলো একীভূতকরণের "
-"পরামর্শ দাও"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [সকলকিছু]\n"
-"       XFdrake [--noauto] মনিটর\n"
-"       XFdrake রেজ্যুলুশন"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"ব্যবহার: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-# সাম
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "পরিবর্তনগুলো কার্যকর করতে আপনাকে রিবুট করতে হবে"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "অনুগ্রহপূর্বক লগ-আউট করুন ও তারপর Ctrl-Alt-BackSpace চাপুন"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr "পরিবর্তন কার্যকর করার পূর্বে আপনাকে লগ-আউট করে তারপর পুণরায় লগ-ইন করতে হবে"
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "টার্মিনাল সার্ভার ছাড়া অর্থহীন"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s-এর একটি ব্যবহারকারীর-নাম প্রয়োজন...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s-এর প্রয়োজন হোস্ট-নাম, MAC ঠিকানা, আই.পি., nbi-ইমেজ, THIN_CLIENT-এর জন্য "
-"0/1, স্থানীয় কনফিগ-এর জন্য 0/1...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: %s-এর একটি হোস্ট-নাম প্রয়োজন...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "টার্মিনাল সার্ভার কনফিগারেশন"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "সার্ভার সক্রিয় করো"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "সার্ভার নিষ্ক্রিয় করো"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "সার্ভার আরম্ভ করো"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "সার্ভার বন্ধ করো"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "ইথারনেট ফ্লপি/আই.এস.ও."
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "নেট বুট ইমেজ"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "ব্যবহারকারী যোগ/অপসারণ করো"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "ক্লায়েন্ট যোগ/অপসারণ করো"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "ইমেজ"
-
-# সাম
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr "ক্লায়েন্ট/ব্যবহারকারী"
-
-# FIXME
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "প্রারম্ভিক উইজার্ড"
-
-# FIXME
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-"ডিসপ্লে ব্যবস্থাপক (dm) হিসেবে %s-কে নির্দিষ্ট করা হয়েছে, /etc/passwd$$CLIENT$$ "
-"ফাইলে জি.ডি.এম. নামক ব্যবহারকারী যোগ করা হচ্ছে"
-
-# সাম
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-"\n"
-" এই উইজার্ড রুটিন:\n"
-" \t১) আপনাকে 'থিন' বা 'ফ্যাট' ক্লায়েন্ট বাছাই করতে বলবে।\n"
-"\t২) DHCP সেটআপ করবে।n\t\n"
-"\t\n"
-"এরপর, উইজার্ডটি:\n"
-"\t\n"
-"    ক) সব nbis তৈরী "
-"করবে।                                                           \n"
-"    খ) সার্ভার সক্রিয় "
-"করবে।                                                              \n"
-"    গ) সার্ভার চালু "
-"করবে।                                                       \n"
-"    ঘ) শ্যাডো ফাইলগুলো যৌগপদিক করবে যাতে root সহ সব ব্যবহারকারী, \n"
-"       shadow$$CLIENT$$ ফাইলে যুক্ত "
-"হয়।                                                       \n"
-"    ঙ) আপনাকে একটি বুট ফ্লপি তৈরী করতে পরামর্শ দেবে।\n"
-"    চ) যদি থিন ক্লায়েন্ট হয়ে থাকে তবে পুনরায় KDM চালু করতে বলবে।\n"
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "উইজার্ড বাতিল করো"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr "অনুগ্রহপূর্বক dhcpd কনফিগ সংরক্ষণ করুন!"
-
-# FIXME
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr "থিন ক্লায়েন্ট ব্যবহার করো"
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr "ক্লায়েন্টের এক্স কীবোর্ড-এর বৈশিষ্ট্যকে সার্ভারের সাথে এককালবর্তী (Sync) করো।"
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"অনুগ্রহপূর্বক ক্লায়েন্টের ডিফল্ট ধরন বেছে নিন।\n"
-"    'থিন' ক্লায়েন্টের সব কিছুই সার্ভারের সি.পি.ইউ./র্যাম এবং ক্লায়েন্টের ডিসপ্লে "
-"ব্যবহার করে চালানো হয়।\n"
-"    আর 'ফ্যাট' ক্লায়েন্ট তার নিজস্ব সি.পি.ইউ./র্যাম এবং সার্ভারে ফাইল সিস্টেম "
-"ব্যবহার করে।"
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "সকল কার্নেলের জন্য নেট বুট ইমেজ তৈরি করা হচ্ছে"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "এ কাজে কয়েক মিনিট সময় লাগবে।"
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "সম্পন্ন!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-# FIXME
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-"সার্ভারের ব্যবহারকারীর তালিকাকে রুটসহ ক্লায়েন্ট তালিকার সাথে এককালবর্তী (Sync) করা "
-"হচ্ছে।"
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-"থিন ক্লায়েন্টের জন্য কৃত পরিবর্তন কার্যকর করার জন্য ডিসপ্লে ব্যবস্থাপককে পুনরায় চালু "
-"করতে হবে।  এখনি কি পুনরায় চালু করবো?"
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr "টার্মিনাল সার্ভারের সামগ্রিক চিত্র"
-
-# সাম
-# customize
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - ইথারবুট সক্রিয় বুট ইমেজ তৈরী করুন:\n"
-"        \tএকটি কার্নেল ইথারবুট দিয়ে বুট করার জন্য একটি বিশেষ kernel/initrd ইমেজ "
-"তৈরী করতে হবে।\n"
-"        \tmkinitrd-net এই কাজটির অধিকাংশ করে দেয় এবং drakTermServ হচ্ছে একটি "
-"গ্রাফিক্যাল \n"
-"        \tইন্টারফেস যা এই ইমেজগুলোর ব্যবস্থাপনা/কাস্টোমাইজ করতে সাহায্য করে। \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include ফাইলটি include \n"
-"        \tহিসেবে dhcpd.conf এ অন্তর্ভুক্ত করা হয়, যেটি তৈরী করতে আপনাকে অন্তত "
-"একটি সম্পূর্ন \n"
-"        \tকার্নেলের জন্য ইথারবুট ইমেজ তৈরী করতে হবে।"
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-
-# সাম
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"        যদিও আপনি ক্লায়েন্ট মেশিনের জন্য একটি নির্দিষ্ট এন্ট্রির বদলে, অনেকগুলো IP "
-"addresses\n"
-"        ব্যবহার করতে পারেন, তথাপি নির্দিষ্ট IP addresses ব্যবহার করলে আপনি "
-"ClusterNFS\n"
-"        সরবরাহকৃত ক্লায়েন্ট প্রতি কনফিগারেশন ফাইল ব্যবস্থার সুবিধা পেতে পারেন।\n"
-"\t\t\t\n"
-"        দ্রষ্টব্য: '#type' ক্ষেত্রটি শুধুমাত্র drakTermServ দ্বারা  ব্যবহৃত হয়। ক্লায়েন্ট "
-"শুধুমাত্র 'থিন''\n"
-"        বা 'ফ্যাট' হতে পারে। থিন ক্লায়েন্টগুলো XDMCP এর মাধ্যমে বেশীরভাগ সফ্টওয়্যার "
-"সার্ভারে চালায়, \n"
-"        আর 'ফ্যাট' ক্লায়েন্টগুলো বেশীরভাগ সফ্টওয়্যার ক্লায়েন্টেই চালায়।\n"
-"        থিন ক্লায়েন্টের জন্য একটি বিশেষ inittab, %s লেখা হয়। থিন ক্লায়েন্টে "
-"ব্যবহার করা হলে,\n"
-"        XDMCP সক্রিয় করার জন্য সিস্টেম কনফিগারেশন ফাইল xdm-config, kdmrc, and "
-"gdm.conf\n"
-"        পরিবর্ধন করা হয়। যেহেতু XDMCP তে নিরাপত্তার প্রশ্ন বিদ্যমান, hosts.deny "
-"এবং hosts.allow\n"
-"        ব্যবহার করে স্থানীয় সাবনেটে প্রবেশ সীমাবদ্ধ করা হয়।\n"
-"\t\t\t\n"
-"        দ্রষ্টব্য: '#hdw_config' এন্ট্রিটি শুধুমাত্র drakTermServ ব্যবহার করে। "
-"ক্লায়েন্টের মান শুধুমাত্র সত্য \n"
-"        বা মিথ্যা হতে পারে। সত্য হলে ক্লায়েন্ট মেশিনে রুট লগইন সম্ভব এবং "
-"স্থানীয়ভাবে 'drak' টুলসমূহ \n"
-"        ব্যবহার করে শব্দ, মাউস, X হার্ডওয়্যার কনফিগারেশন করা যেতে পারে। "
-"ক্লায়েন্টের IP addresses \n"
-"        এর সাথে সম্পৃক্ত আলাদা কনফিগারেশন ফাইল তৈরী করে এবং পড়া/লেখা মাউন্ট "
-"পয়েন্ট তৈরী \n"
-"        করে ক্লায়েন্টকে তা পরিবর্ধনের সুযোগ দিয়ে এটি সক্রিয় করা হয়। এই "
-"কনফিগারেশনে সন্তূষ্ট হলে \n"
-"        আপনি ক্লায়েন্ট থেকে রুট লগইন সুবিধা সরিয়ে ফেলতে পারেন।\n"
-"\t\t\t\n"
-"        দ্রষ্টব্য: ক্লায়েন্ট অন্তর্ভুক্ত বা বদল করার পর বন্ধ করে পুনরায় চালু করতে হবে।"
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
-# সাম
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - 1$%s রক্ষনাবেক্ষণ করো:\n"
-"        \tব্যবহারকারীদের ডিস্কবিহীন ক্লায়েন্ট থেকে সিস্টেমে লগইন করতে হলে,\n"
-"        \t/etc/shadow তে তাদের এন্ট্রি, 2$%s এ কপি করতে হবে। এই ক্ষেত্রে\n"
-"        \tdrakTermServ ফাইলে সিস্টেম ব্যবহারকারী যোগ করে বা সরিয়ে সাহায্য করে।"
-
-# সাম
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - ক্লায়েন্ট প্রতি %s:\n"
-"        \tclusternfs দিয়ে, সার্ভারের রুট ফাইল সিস্টেমে, প্রতিটি ডিস্কবিহীন "
-"ক্লায়েন্টের জন্য স্বকীয় কনফিগারেশন\n"
-"        \t ফাইল তৈরী করা যায়। স্থানীয় ক্লায়েন্ট হার্ডওয়্যার কনফিগারেশন অনুমোদন "
-"করলে,\n"
-"        \tdrakTermServ এই ফাইলগুলো তৈরী করতে সাহায্য করবে।"
-
-# সাম
-# customize  = ?
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - ক্লায়েন্ট প্রতি সিস্টেম কনফিগারেশন ফাইল:\n"
-"        \tclusternfs দিয়ে, সার্ভারের রুট ফাইল সিস্টেমে, প্রতিটি ডিস্কবিহীন "
-"ক্লায়েন্টের জন্য স্বকীয় কনফিগারেশন\n"
-"        \t ফাইল তৈরী করা যায়। স্থানীয় ক্লায়েন্ট হার্ডওয়্যার কনফিগারেশন অনুমোদন "
-"করলে,\n"
-"        \t প্রতি ক্লায়েন্টের জন্য /etc/modules.conf, /etc/sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard ফাইলসমূহ কাস্টোমাইজ করা যেতে পারে।\n"
-"\n"
-"        দ্রষ্টব্য: স্থানীয় ক্লায়েন্ট হার্ডওয়্যার কনফিগারেশন সক্রিয় করলে, এই ফিচার "
-"সক্রিয় করা প্রতিটি মেশিনের \n"
-"        জন্য টার্মিনাল সার্ভারের রুট লগইন সক্রিয় হয়। একবার ক্লায়েন্ট মেশিন কনফিগার "
-"করা হয়ে গেলে, স্থানীয় \n"
-"        কনফিগারেশন বন্ধ করে দেয়া যায়, এতে কনফিগারেশন ফাইলগুলো সংরক্ষিত থাকে।"
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "বুট ফ্লপি"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "বুট ISO"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "PXE ইমেজ"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "ডিফল্ট কার্নেল ভার্সন"
-
-# সাম
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr "PXE ইমেজ তৈরী করো।"
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "পুরো কার্নেল বিল্ড করো -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "কোন কার্নেল নির্বাচন করা হয় নি!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "একটি NIC বিল্ড করো -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "কোন NIC নির্বাচন করা হয় নি"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "সকল কার্নেলসমুহ বিল্ড করো -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- মুছো"
-
-# সাম
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "কোন ইমেজ নির্বাচন করা হয়নি!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "সকল NBI সমুহকে মুছো"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! সিস্টেম ডাটাবেজের পাসওয়ার্ড টার্মিনাল সার্ভার ডাটাবেজের পাসওয়ার্ডের\n"
-"চেয়ে ভিন্ন। টার্মিনাল সার্ভারে লগিন সক্রিয় করতে ব্যবহারকারী \n"
-"মুছে দিন/পুনরায়-যুক্ত করুন।"
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "ব্যবহারকারী যোগ করো -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- ব্যবহারকারী মুছো"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "ধরণ: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "স্হানীয় কনফিগ: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"স্হানীয় হার্ডওয়্যার কনফিগারেশনকে\n"
-"অনুমতি দাও।"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "কোন নেট বুট ইমেজ তৈরি করা হয় নি!"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "থিন ক্লায়েন্ট"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "থিন ক্লায়েন্টসমুহকে অনুমতি দাও"
-
-# সাম: Sync = সমতালীয় ?
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-"ক্লায়েন্টের এক্স কীবোর্ডের মানসমূহকে\n"
-" সার্ভারের সাথে সমতালীয় করো।"
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "ক্লায়েন্ট যোগ করো -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "ধরণ: মোটা"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "ধরণ: পাতলা"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "স্হানীয় কনফিগ: মিথ্যা"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "স্থানীয় কনফিগ: মিথ্যা"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- ক্লায়েন্ট সম্পাদন"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "স্হানীয় কনফিগ নিষ্ক্রিয় করো"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "ক্লায়েন্ট মুছো"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd কনফিগ..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"সম্পূর্ণ পরিবর্তনগুলো সক্রিয় করার জন্য ডিসপ্লে ম্যানেজার পুনরায় চালু করা প্রয়োজন। \n"
-"(কনসোলে লিখুন - service dm restart)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-"Thin ক্লায়েন্ট স্বয়ংক্রিয় লগিনের সাথে কাজ করবে না। স্বয়ংক্রিয় লগিন নিষ্ক্রিয় করবেন?"
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "সমস্ত ক্লায়েন্ট %s ব্যবহার করবে"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "সাবনেট:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "নেটমাস্ক:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "রাউটার সমুহ:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "সাবনেট মাস্ক:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "ব্রডকাস্ট অ্যাড্রেস:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "ডোমেইন নাম:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "নেইম সার্ভার সমুহ:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "আই-পি range শুরু:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "আই-পি range শেষ:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr "বিদ্যমান কন্‌ফিগ যুক্ত append TS"
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "কনফিগ লিখ"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd সার্ভার কনফিগারেশন"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"এই মানগুলোর বেশিরভাগই আপনার চলন্ত সিস্টেম\n"
-"থেকে বের করা হয়েছে।\n"
-"আপনি আপনার প্রয়োজন মত পরিবর্তন করতে পারেন।"
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "অনুগ্রহ করে ফ্লপি ডিস্ক প্রবেশ করান:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "ফ্লপিটিতে প্রবেশ করা যাচ্ছে নাহ্!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "এখন ফ্লপি সরানো যাবে নাহ্"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "কোন ফ্লপি ড্রাইভ উপস্থিত নেই!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "%s/%s হলো PXE ইমেজ"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "%s/%s লিখতে সমস্যা হয়েছে"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "%s হলো ইথারবুট ISO ইমেজ"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "কিছু একটা সমস্যা হয়েছে! - mkisofs ইনস্টল করা আছে?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "প্রথমে /etc/dhcpd.conf তৈরি করতে হবে!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr "%s পাসওয়ার্ড টার্মিনাল সার্ভার এ ভাল নয় - আবার লেখছি...\n"
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s ব্যবহারকারী নয়..\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s ইতিমধ্যেই একজন টার্মিনাল সার্ভার ব্যবহারকারী\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "টার্মিনাল সার্ভারে %s যোগ করা ব্যর্থ হয়েছে!\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "টার্মিনাল সার্ভারে %s যোগ করা হয়েছে!\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "%s মুছা হয়েছে...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "%s পাওয়া যাচ্ছে নাহ্...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-"/etc/hosts.allow এবং /etc/hosts.deny ইতিমধ্যেই কনফিগার করা হয়েছে - বদলানো হয়নি"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "কনফিগারেশন বদলানো হয়েছে - clusternfs/dhcpd আবার শুরু করবো? "
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "সমস্যা!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "দরকারি ইমেজ ফাইল `%s' কে খুঁজে পাচ্ছি নাহ্।"
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "সয়ংক্রিয় ইনস্টল কনফিগারকারী"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "পুনরায় চালাও"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "নিজ হাতে"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "সয়ংক্রিয় ধাপসমুহের কনফিগারেশন"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"অনুগ্রহ করে এটার প্রত্যেকটি স্টেপ বাছাই করুন যেখানে আপনার ইনস্টলের মত এটি পুনরায় "
-"চলবে, অথবা এটি হাতে হাতে হবে"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "সয়ংক্রিয় ফ্লপি ইনস্টল তৈরি করা হচ্ছে"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "আরেকটি ফাঁকা ফ্লপি %s ডিস্কে ঢুকান (ড্রাইভার ডিস্কের জন্য)"
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "সয়ংক্রিয় ফ্লপি ইনস্টল তৈরি করা হচ্ছে (ড্রাইভার ডিস্ক)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"স্বাগতম।\n"
-"\n"
-"সয়ংক্রিয়-ইনস্টলের জন্য প্যারামিটারসমুহ বাঁ দিকের সেকশানে উপস্হিত"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "অভিনন্দন!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"ফ্লপিটি সাফল্যের সাথে তৈরী করা হয়েছে।\n"
-"আপনি এখন আপনার ইনস্টলেশন পুনরায় চালু করতে পারেন।"
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "সয়ংক্রিয় ইনস্টল"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "একটি আইটেম যোগ করো"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "শেষ আইটেমটি সরাও"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"TCL স্ক্রিপ্টিং ভাষার প্রতি বর্ধিত কিছু আশা করা হচ্ছে যা ব্যবহারকারীর সহায়তা ছাড়াই "
-"নিজে নিজেই কাজ করবে।"
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "ড্র্যাকব্যাকআপ কন্‌ফিগারেশনে এই সিস্টেমের জন্য পাসওয়ার্ড জমা করুন।"
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"একটি মাল্টিসেশন সিডি'র জন্য, শুধুমাত্র প্রথম সেশন cdrw মুছে ফেলবে। অন্যথায় প্রত্যেক "
-"ব্যাকআপের পূর্বেইcdrw মুছে যাবে।"
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"এই অপশন পরিবর্তিত হওয়া ফাইলগুলো সংরক্ষন করবে। সঠিক ব্যবহার নির্ভর করবে কখন "
-"incremental বা differential মোড ব্যবহৃত হবে।"
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"Incremental ব্যাকআপ শুধুমাত্র পরিবর্তিত অথবা সর্বশেষ নতুন ব্যাকআপ পর্যন্ত সংরক্ষণ করে।"
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Differential ব্যাকআপ শুধুমাত্র পরিবর্তিত অথবা সর্বশেষ আসল 'base' ব্যাকআপ পর্যন্ত "
-"সংরক্ষণ করে।"
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"এক্ষেত্রে অবশ্যই একজন স্থানীয় ব্যবহারকারী অথবা ই-মেইল অ্যাড্রেস হওয়া উচিত যাকে আপনি "
-"ব্যাকআপ ফলাফলের প্রাপক হিসেবে ব্যবহার করবেন। আপনাকে একটি সঠিক মেইল সার্ভার বলে "
-"দেয়া উচিত।"
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"একটি ডিরেক্টরি ট্রি'র উপরে থাকা একটি .backupignore ফাইলে তালিকাস্থ ফাইল বা "
-"ওয়াইল্ডকার্ড ব্যাকআপ হবে না।"
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"অন্যান্য মিডিয়াতে ব্যাকআপ করার জন্য, হার্ড ড্রাইভে ফাইলগুলো ইতিমধ্যেই তৈরী হয়ে আছে, "
-"তারপর অন্য মিডিয়াতে স্থানান্তর। এই অপশনটি সক্রিয় থাকলে হার্ড ড্রাইভে tar ফাইল "
-"ব্যাকআপ করার পর সেটি মুছে ফেলবে।"
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"কিছু প্রোটোকল, যেমন rsync, সার্ভারে কন্‌ফিগার হতে পারে। ডিরেক্টরি পাথ ব্যবহার করার "
-"চেয়ে, আপনি সার্ভিস পাথের জন্য 'মডিউল'এর নাম ব্যবহার করতে পারেন।"
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"আপনাকে আপনার নিজের দিন এবং সময় নির্দিষ্ট করার অনুমতি দেয়া হচ্ছে। অন্যান্য অপশন /"
-"etc/crontab ব্যবহার করে।"
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr "ক্রন (cron) অপারেশনের জন্য কোন মিডিয়া চিহ্নিত হয়নি।"
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr "ক্রন (cron) অপারেশনের জন্য কোন বিরতি চিহ্নিত হয়নি।"
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "root ছাড়া ক্রন বিরতি পাওয়া যাবে না"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr "\"%s\" কোন সঠিক ই-মেইলও নয় আবার স্থানীয় কোন ব্যবহারকারীও নয়!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"\"%s\" একজন স্থানীয় ব্যবহারকারী, কিন্তু আপনি কোন স্থানীয় smtp বাছাই করেন নি, "
-"সুতরাং আপনাকে অবশ্যইএকটি সম্পূর্ণ ই-মেইল ঠিকানা ব্যবহার করতে হবে!"
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr "সঠিক ব্যবহারকারীদের তালিকা পরিবর্তন হয়েছে, config ফাইল পুনরায় লেখা হচ্ছে।"
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "ব্যবহারকারীদের পুরাতন তালিকা:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "ব্যবহারকারীদের নতুন তালিকা:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      ড্র্যাকব্যাকআপ রিপোর্ট \n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      ড্র্যাকব্যাকআপ ডেম্যন রিপোর্ট\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    ড্র্যাকব্যাকআপ রিপোর্টের বিশদ বিবরণ\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "মোট উন্নতি"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s ইতিমধ্যেই বর্তমান, মুছব?\n"
-"\n"
-"আপনি যদি ইতিমধ্যেই কাজ করে ফেলে থাকেন তাহলে আপনাকে সম্ভবত সার্ভারে থাকা \n"
-"authorized_keys এর এন্ট্রিগুলো বিশোধিত করতে হবে।"
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "কী সমুহ তৈরি হতে কিছু সময় লাগবে।"
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "%s কে spawn করা যাচ্ছে নাহ্।"
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "%s পোর্টের %s এ কোন পাসওয়ার্ড প্রম্পট নেই"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "%s এ ভুল পাসওয়ার্ড"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "%s কে %s এ স্থানান্তরের অনুমতি নেই"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "%2$s এ %1$s কে খুঁজে পাওয়া যায় নি"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s সাড়া দিচ্ছে নাহ্"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"স্থানান্তর সফলভাবে হয়েছে\n"
-"আপনি এখন সার্ভারে প্রবেশ পরীক্ষা করে দেখতে পারেন:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"পাসওয়ার্ড প্রম্পট ছাড়াই।"
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "ড্রাইভে কোন সিডি-আর/ডিভিডি-আর নেই!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "রেকর্ড করার মতো মাধ্যম বলে মনে হচ্ছে নাহ্!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "মোছার মতো মাধ্যম নাহ্!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "মাধ্যমটি মুছতে কিছু সময় লাগতে পারে।"
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "সিডি প্রবেশ অনুমতির সমস্যা।"
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "%s এর মধ্যে কোন টেপ নেই!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "সিস্টেম ফাইলগুলো ব্যাকআপ করা হচ্ছে..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "হার্ড ডিস্ক ব্যাকআপ ফাইল..."
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "ব্যবহারকারীর ফাইলগুলো ব্যাকআপ করা হচ্ছে..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "অন্যান্য ফাইলগুলো ব্যাকআপ করা হচ্ছে..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "হার্ড ডিস্ক ব্যাকআপের উন্নতি..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "ব্যাকআপে কোন পরিবর্তন নেই!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"%s এর মাধ্যমে ড্র্যাকব্যাকআপ কার্যক্রম:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" এফ.টি.পি. সংযোগে সমস্যা: আপনার ব্যাক-আপ ফাইলগুলো এফ.টি.পি. ব্যবহার করে প্রেরণ "
-"করা যায় নি।\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-"এফ.টি.পি. ব্যবহার করে ফাইল প্রেরণে সমস্যা।  অনুগ্রহপূর্বক এফ.টি.পি. কনফিগারেশন "
-"সংশোধন করুন।"
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "এফ.টি.পি. ব্যবহার করে সর্বশেষ প্রেরিত ফাইল: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"সিডি ব্যবহার করে ড্রেকব্যাক-আপ-এর কার্যকলাপ:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"টেপ ব্যবহার করে ড্রেকব্যাক-আপ-এর কার্যকলাপ:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr "মেইল প্রেরণে সমস্যা।  রিপোর্ট মেইল প্রেরণ করা হয় নি।"
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " মেইল প্রেরণে সমস্যা।\n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "তালিকা তৈরি করা যাচ্ছে না!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"অনুগ্রহপূর্বক আপনার প্রয়োজনীয় সকল অপশন পরীক্ষা করুন।\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"এই অপশনগুলো /etc ডিরেক্টরির সকল ফাইল ব্যাক-আপ এবং ব্যাক-আপ থেকে পুনরুদ্ধার করতে "
-"পারে।\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "সিস্টেম ফাইলসমূহ ব্যাক-আপ করুন। (/etc ডিরেক্টরি)"
-
-# FIXME: Incremental = বৃদ্ধিঘটিত ?
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr "বৃদ্ধিঘটিত/পার্থক্যমূলক ব্যাক-আপ ব্যবহার করো (পুরনো ব্যাক-আপ অপসারণ করবে না)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "বৃদ্ধিঘটিত ব্যাক-আপ ব্যবহার করো"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "পার্থক্যমূলক ব্যাক-আপ ব্যবহার করো"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "গুরুত্বপূর্ণ ফাইলসমূহ অন্তর্ভুক্ত করবে না (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"এই অপশনের সাহায্যে /etc ডিরেক্টরির যে কোন সময়ের ব্যাক-আপ পুনরুদ্ধার করতে পারবেন।"
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"অনুগ্রহপূর্বক যে সকল ব্যবহারকারীকে ব্যাক-আপ-এর অন্তর্ভুক্ত করতে চান তাদের টিক দিন।"
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "ব্রাউজার ক্যাশ অন্তর্ভুক্ত করবে না"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "ফাইল বা ডিরেক্টরি নির্বাচন করুন ও তারপর 'ঠিক আছে' ক্লিক করুন"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "নির্বাচিতদের অপসারণ করো"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "ব্যবহারকারী"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "ব্যাক-আপ তৈরির জন্য নেটওয়ার্ক সংযোগ ব্যবহার করো"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "নেট পদ্ধতি:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "এস.এস.এইচ.-এর জন্য Expect ব্যবহার করো"
-
-# FIXME
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "এস.এস.এইচ.-এর জন্য ব্যাক-আপ কী (Key) তৈরি/স্থানান্তর করো"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "এখন স্থানান্তর করো"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "অন্যান্য(ড্রেকব্যাক-আপ ব্যতীত) কীসমূহ (Key) ইতিমধ্যেই যথাস্থানে রয়েছে"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "হোস্টনাম বা আই.পি."
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr "এই হোস্ট-এর যে ডিরেক্টরিতে (বা মডিউলে) ব্যাক-আপ রাখা হবে।"
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "এই পাসওয়ার্ডটি মনে রাখবে"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "হোস্টনাম, ব্যবহারকারীর নাম ও পাসওয়ার্ড প্রয়োজন!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "ব্যাক-আপ তৈরির জন্য সিডি-আর/ডিভিডি-আর ব্যবহার করো"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "সিডি/ডিভিডি ডিভাইস বেছে নিন"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "সিডি/ডিভিডি মিডিয়ার আকার বেছে নিন"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "মাল্টিসেশন সিডি"
-
-# FIXME
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "সিডি-রিড-রাইট (CDRW) মিডিয়া"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "রিড-রাইট মিডিয়ায় ধারণকৃত তথ্য মুছে ফেলো (১ম সেশন)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " এখন মোছো "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "ডিভিডি+রিড-রাইট মিডিয়া"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "ডিভিডি-আর মিডিয়া"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "ডিভিডির্যাম ডিভাইস"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "কোন সিডি ডিভাইস নির্দিষ্ট করা হয় নি!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "ব্যাক-আপ-এর কাজে টেপ ব্যবহার করো"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "ব্যক-আপ-এর কাজে ব্যবহৃত ডিভাইসের নাম"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr "সরাসরি টেপে ব্যাকআপ"
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "ব্যাক-আপ তৈরির পর টেপকে প্রথমে নিয়ে (Rewind) যাবে না"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "ব্যাক-আপ-এর পূর্বে টেপে ধারনকৃত তথ্য মুছে ফেলো"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "ব্যাক-আপ তৈরি সম্পন্ন হওয়ার পর টেপ বের করে দাও"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "যে ডিরেক্টরিতে সংরক্ষণ করা হবে তাতে প্রবেশ করো:"
-
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr "যে ডিরেক্টরিতে সংরক্ষণ করা হবে"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "সিডি-আর / ডিভিডি-আর"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "হার্ডড্রাইভ / এন.এফ.এস."
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "প্রতিঘন্টা"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "প্রতিদিন"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "প্রতিসপ্তাহ"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "প্রতিমাস"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "স্বনির্বাচিত"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "জানুয়ারি"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "ফেব্রুয়ারি"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "মার্চ"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "এপ্রিল"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "মে"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "জুন"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "জুলাই"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "আগস্ট"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "সেপ্টেম্বর"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "অক্টোবর"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "নভেম্বর"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "ডিসেম্বর"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "রবিবার"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "সোমবার"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "মঙ্গলবার"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "বুধবার"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "বৃহস্পতিবার"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "শুক্রবার"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "শনিবার"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "ডেইমন ব্যবহার করো"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "অনুগ্রহপূর্বক যে সময়ের ব্যবধানে ব্যাক-আপ করা হবে তা বেছে নিন"
-
-# FIXME
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "স্বনির্বাচিত বৈশিষ্ট্য/ক্রনট্যাব এন্ট্রি:"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "মিনিট"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "ঘন্টা"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "দিন"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "মাস"
-
-# FIXME: ভাল হইলো না ;-(
-# শনিবার ব্যতীত যে কোন দিন
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "সাপ্তাহিক দিন"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "ব্যাক-আপ-এর কাজে যে মিডিয়া ব্যবহার করা হবে তা বেছে নিন।"
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "অনুগ্রহপূর্বক নিশ্চিত হন যে সার্ভিস তালিকার ক্রন ডেইমন অন্তর্ভুক্ত রয়েছে।"
-
-# সাম
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr "যদি আপনার মেশিন সর্বক্ষণ চালু না থাকে, তবে anacron ইনস্টল করতে পারেন।"
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr "লক্ষ করুন যে, বর্তমানে সকল 'নেট' মিডিয়াই হার্ডড্রাইভকে ব্যবহার করে।"
-
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr "অনুগ্রহপূর্বক কমপ্রেশনের ধরন বেছে নিন"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr ".backupignore ফাইল ব্যবহার করো"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "প্রতিবার ব্যাক-আপ তৈরির পর এই ঠিকানায় মেইল প্রেরণ করো:"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "মেইল প্রেরণের জন্য এস.এম.টি.পি. সার্ভার:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-"অন্য কোন মিডিয়ায় ব্যাক-আপ তৈরি হয়ে যাওয়ার পর হার্ডড্রাইভ থেকে টার ফাইল মুছে ফেলো"
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "কি"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "কোথায়"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "কখন"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "আরো অপশন"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "ব্যাপ-আপ-এর গন্তব্য কনফিগার করা হয় নি..."
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "ড্রেকব্যাক-আপ কনফিগারেশন"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "অনুগ্রহপূর্বক যে স্থানে ব্যাক-আপ রাখতে চান তা বেছে নিন"
-
-# FIXME
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "সকল মিডিয়ার জন্য ব্যাক-আপ প্রস্তুতিতে ব্যবহৃত হার্ডড্রাইভ"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "নেটওয়ার্কব্যাপী"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "সিডি-আর এ"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "টেপ ড্রাইভ এ"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "ব্যবহারকারীদের তথ্য ব্যাক-আপ করো"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (স্বাভাবিক অবস্থায় সকল ব্যবহারকারীর তথ্য ব্যাক-আপ করা হয়)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "অনুগ্রহপূর্বক যে সব জিনিষ ব্যাক-আপ করতে চা তা বেছে নিন"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "ব্যাক-আপ সিস্টেম"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "নিজ হাতে ব্যবহারকারী বেছে নিন"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "অনুগ্রহপূর্বক যে সব তথ্য ব্যাক-আপ করতে চান তা বেছে নিন..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"ব্যাক-আপ উত্‍স: \n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- সিস্টেম ফাইল:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- ব্যবহারকারীর ফাইল:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- অন্যান্য ফাইল:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"হার্ডড্রাইভের যে স্থানে সংরক্ষণ করা হয়েছে তার পাথ: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tডিস্কের ব্যবহার %s মেগাবাইটে সীমাবদ্ধ রাখুন\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- ব্যাক-আপ তৈরি সম্পন্ন হওয়ার পর হার্ডড্রাইভ থেকে টার ফাইল মুছে ফেলো।\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"সিডি'তে লেখো"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "রিড-রাইট"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " এই ডিভাইসে: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (মাল্টিসেশন)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- এই ডিভাইসের টেপের সংরক্ষণ করো: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tমোছো=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr "\tসরাসরি টেপে ব্যাকআপ\n"
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- %s এর মাধ্যমে এই হোস্টে সংরক্ষণ করো: %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t  ব্যবহারকারীর নাম: %s\n"
-"\t\t পাথ: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- অপশন:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tসিস্টেম ফাইল অন্তর্ভুক্ত করবে না\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tব্যাক-আপকৃত ফাইলসমূহ টার ও bzip2 ব্যবহার করে\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tব্যাক-আপকৃত ফাইলসমূহ টার ও gzip ব্যবহার করে\n"
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tব্যাক-আপকৃত ফাইলসমূহ শুধু টার ব্যবহার করে\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\t.backupignore ফাইল ব্যবহার করো\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\t%s-কে মেইল প্রেরণ করো\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\t%s এস.এম.টি.পি. সার্ভার ব্যবহার করে\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- ডেইমন, %s ভায়া:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-হার্ডড্রাইভ।\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-সিডি-আর।\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-টেপ \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-এফ.টি.পি.'র মাধ্যমে নেটওয়ার্ক।\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-এস.এস.এইচ.-এর মাধ্যমে নেটওয়ার্ক।\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-rsync-এর মাধ্যমে নেটওয়ার্ক।\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "কোন কনফিগারেশন পাওয়া যায় নি, অনুগ্রহপূর্বক 'উইজার্ড' বা 'অগ্রসর' ক্লিক করুন।\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"যে সকল তথ্য ব্যাক-আপ থেকে পুনরুদ্ধার করতে হবে তাদের তালিকা:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- ব্যাক-আপ থেকে সিস্টেম ফাইলসমূহ পুনরুদ্ধার করো।\n"
-
-# FIXME
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - এই তারিখ হতে: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- ব্যাক-আপ থেকে ব্যবহারকারীর ফাইলসমূহ পুনরুদ্ধার করো।\n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- ব্যাক-আপ থেকে অন্যান্য ফাইলসমূহ পুনরুদ্ধার করো।\n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"ক্ষতিগ্রস্থ তথ্যের তালিকা:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "অনুগ্রহপূর্বক পরবর্তী বার এটির টিক উঠিয়ে দিন বা একে অপসারণ করুন। "
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "ব্যাক-আপকৃত ফাইলসমূহ ক্ষতিগ্রস্থ"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          আপনার বাছাইকৃত সকল তথ্য          "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          সফলভাবে ব্যাক-আপ থেকে পুনরুদ্ধার করে %s-এ রাখা হয়েছে          "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "          ব্যাক-আপ থেকে পুনরুদ্ধার প্রক্রিয়ার কনফিগারেশন          "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "অন্যান্য ফাইল থেকে ব্যাক-আপ থেকে পুনরুদ্ধারের জন্য ঠিক আছে চাপুন।"
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"ব্যবহারকারীর যে তালিকা ব্যাক-আপ থেকে পুরুদ্ধার করতে হবে (শুধুমাত্র প্রত্যেক "
-"ব্যবহারকারীর অতি সাম্প্রতিক তথ্যাবলীই গুরুত্বপূর্ণ)"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "অনুগ্রহপূর্বক ব্যাক-আপ থেকে যে সকল তথ্য পুনরুদ্ধার করতে চান তা বেছে নিন:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "হার্ডডিস্ক থেকে পুনরুদ্ধার করো।"
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "যে ডিরেক্টরিতে ব্যাক-আপ রাখা হয়েছে তাতে প্রবেশ করুন"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr "ব্যাক-আপ ধারনকারী ডিরেক্টরি"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "ব্যাক-আপ থেকে তথ্য পুনরুদ্ধারের জন্য অপর একটি মিডিয়া বেছে নিন"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "অন্যান্য মিডিয়া"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "ব্যাক-আপ থেকে সিস্টেম ফাইল পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "ব্যাক-আপ থেকে ব্যবহারকারীর ফাইল পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "ব্যাক-আপ থেকে অন্যান্য ফাইল পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr ""
-"ব্যাক-আপ থেকে ফাইল পুনরুদ্ধার করে যেখানে রাখা হবে তার পাথ বেছে নিন (/ এর পরিবর্তে)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "ব্যাক-আপ থেকে ফাইল পুনরুদ্ধার করে যেখানে রাখা হবে"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"ব্যাক-আপ থেকে পুরুদ্ধারের পূর্বে নতুন করে ব্যাক-আপ করো (শুধুমাত্র বৃদ্ধিঘটিত ব্যাক-আপ এর "
-"ক্ষেত্রে প্রযোজ্য।)"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "ব্যাক-আপ থেকে পুরুদ্ধারের পূর্বে ব্যবহারকারীর ডিরেক্টরি অপসারণ করো।"
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-"ফাইলের নাম অনুসন্ধানে যে পঙ্‌ক্তি ব্যবহার করা হবে (ফাঁকা পঙ্‌ক্তি সকল নামকে নির্দেশ "
-"করবে):"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "ব্যাক-আপ অনুসন্ধান করো"
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "কোন মিল পাওয়া যায় নি..."
-
-# FIXME
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "বাছাইকৃতদের থেকে ব্যাক-আপ পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-"ব্যাক-আপ ফাইল দেখার জন্য তারিখ/সময়-এ ক্লিক করুন।\n"
-"একাধিক ফাইল বাছাই করার জন্য Ctrl চেপে ধরে ফাইলে ক্লিক করুন।"
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr "বাছাইকৃত তালিকা এন্ট্রি থেকে ব্যাক-আপ পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "বাছাইকৃত ফাইল থেকে ব্যাক-আপ পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "%s-এ কোন ব্যাক-আপ ফাইল পাওয়া যায় নি।"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "সিডি থেকে পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"ভলিউম লেবেল %s সম্বলিত সিডি-কে সিডি ড্রাইভে ঢুকিয়ে\n"
-"/mnt/cdrom অবস্থানে মাউন্ট করো"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "সিডি'র লেবেল সঠিক নয়।  এই ডিস্কটি %s লেবেল সম্বলিত।"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "টেপ থেকে ব্যাক-আপ পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"%s টেপ ড্রাইভ যন্ত্রে %s ভলিউম \n"
-"লেবেলের প্রবেশ করান"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "সঠিক টেপ লেবেল নয়।  টেপটির লেবেল হল %s ।"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "নেটওয়ার্কের সাহায্যে ব্যাক-আপ থেকে পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "এই নেটওয়ার্ক প্রোটোকলের সাহায্যে ব্যাক-আপ থেকে পুনরুদ্ধার করো: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "হোস্ট নাম"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "হোস্ট পাথ বা মডিউল"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "পাসওয়ার্ড প্রয়োজন"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "ব্যবহারকারীর নাম প্রয়োজন"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "হোস্টনাম প্রয়োজন"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "পাথ বা মডিউল প্রয়োজন"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "ব্যাক-আপ থেকে ফাইল পুনরুদ্ধার করা হয়েছে..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "ব্যাক-আপ থেকে পুনরুদ্ধারের প্রচেষ্টা ব্যর্থ হয়েছে..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "%s-কে ফিরে পাওয়া যায় নি..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "ব্যাক-আপ থেকে পুনরুদ্ধারের উদ্দেশ্যে ফাইল অনুসন্ধান"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "ব্যাক-আপ থেকে সব কিছু পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "ব্যাক-আপ থেকে স্বনির্বাচনের মাধ্যমে পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "তালিকা থেকে ব্যাক-আপ পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "পুনরুদ্ধার করার মত কোন ব্যাক-আপ পাওয়া যাচ্ছে না...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "নিশ্চিত হন যে সঠিক পাথ হল %s"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " এবং সিডি'টি ড্রাইভে রয়েছে"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-"মাউন্ট করার অযোগ্য মিডিয়ায় ব্যাক-আপ রয়েছে - তালিকা ব্যবহার করে ব্যাক-আপ থেকে "
-"পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "সিডি যথাস্থানে রয়েছে - এগিয়ে যাও।"
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "নতুন জমা করা ভান্ডার ব্রাউজ করতে।"
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr "যে ডিরেক্টরি থেকে ব্যাক-আপ পুনরুদ্ধার করো"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "ব্যাক-আপ থেকে পুনরুদ্ধারের অগ্রগতি"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "ব্যাক-আপ তৈরি করো"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "ব্যাক-আপ থেকে পুনরুদ্ধার"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "নিম্নোক্ত প্যাকেজসমূহ ইনস্টল করা প্রয়োজন:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "অনুগ্রহপূর্বক যে সব তথ্য ব্যাক-আপ থেকে পুনরুদ্ধার করতে চান তা বেছে নিন..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "সিস্টেম ফাইলের ব্যাক-আপ তৈরি করো"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "ব্যবহারকারীর ফাইলের ব্যাক-আপ তৈরি করো"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "অন্যান্য ফাইলের ব্যাক-আপ তৈরি করো"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "মোট অগ্রগতি"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "এফ-টি-পি ব্যবহার করে ফাইল প্রেরণ করা হচ্ছে"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "ফাইল প্রেরণ করা হচ্ছে..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "এখন কনফিগারেশন ফাইল থেকে ব্যাক-আপ তৈরি করো"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "ব্যাক-আপ প্রক্রিয়ার কনফিগারেশন দেখাও।"
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "উইজার্ড কনফিগারেশন"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "অগ্রসর কনফিগারেশন"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "কনফিগারেশন দেখাও"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "LastLog দেখাও"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "এখন ব্যাক-আপ করো"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"কোন কনফিগারেশন ফাইল পাওয়া যায় নি \n"
-"অনুগ্রহপূর্বক 'উইজার্ড' বা 'অগ্রসর' ক্লিক করুন।"
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "ড্রেকব্যাক-আপ"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/ফাইল (_ফ)"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/ফাইল/প্রস্থান (_প)"
-
-# X11 keysyms must be used here;
-# bengali letter "প" is 0x10009aa
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>0x10009aa"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"আপনার সিস্টেমের বুটলোডার ফ্রেমবাফার মোডে নেই।  গ্রাফিকাল বুট পদ্ধতি সক্রিয় করার জন্য "
-"গ্রাফিকাল বুট কনফিগারেশন থেকে একটি গ্রাফিকাল ভিডিও মোড বেছে নিন।"
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "আপনি কি এক্ষুনি কনফিগার করতে চান?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "থিম ইনস্টল করো"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "গ্রাফিকাল বুট থিম কনফিগারেশন"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "থিম"
-
-# FIXME
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"কনসোলে\n"
-"থিম দেখাও"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "নতুন থিম তৈরি করো"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "ডিফল্ট ব্যবহারকারী"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "ডিফল্ট ডেস্কটপ"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "না, আমি স্বয়ংক্রিয়ভাবে লগ-ইন করতে চাই না"
-
-# FIXME
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "হ্যাঁ, আমি স্বয়ংক্রিয়ভাবে এটিতে লগ-ইন করতে চাই (ব্যবহারকারী, ডেস্কটপ)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "সিস্টেম মোড"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "সিস্টেম চালু করার সময় গ্রাফিকাল মোড সচল করো"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-"অনুগ্রহ করে একটি ভিডিও মোড বেছে নিন, এটার নিচের প্রত্যেক বাছাইকৃত বুট এন্ট্রিতে "
-"প্রভাব ফেলবে।\n"
-"নিশ্চিত হোন যে আপনার ভিডিও কার্ড আপনার বেছে নেয়া মোড সমর্থন করে কিনা।"
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "ম্যান্ড্রিব লিনাক্স ত্রুটি রিপোর্টকারী টুল"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "ম্যান্ড্রিব লিনাক্স নিয়ন্ত্রন (control) সেন্টার"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "সমন্বয়কারী সফটওয়ার"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "স্বয়ংসম্পূর্ণ সফটওয়ার"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "হার্ডড্রেক"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "ম্যান্ড্রিব অনলাইন (Mandriva Online)"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "মেনুড্রেক"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-# মিলিসেকেন্ড, Fix me
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "দূর নিয়ন্ত্রণ"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "সফটওয়ার ব্যবস্থাপক"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-# FIXME
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "উইন্ডোজ মাইগ্রেশন টুল"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "ইউজারড্রেক"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "কনফিগারেশন উইজার্ড"
-
-# সাম
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr "Mandriva টুল বেছে নিন:"
-
-# সাম
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"অথবা অ্যাপলিকেশনের নাম\n"
-"(অথবা সম্পূর্ণ পাথ):"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "প্যাকেজ অনুসন্ধান করো"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "প্যাকেজ:"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "কার্ণেল:"
-
-# সাম
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"ত্রুটি রিপোর্ট প্রেরণের জন্য 'রিপোর্ট' বাটনে ক্লিক করুন।\n"
-"এটি %s এর ওপর একটি ওয়েব ব্রাউজার চালু করবে যেখানে আপনাকে একটি ফর্ম পূরণ করতে "
-"হবে। এরপর উল্লেখিত তথ্যাবলী ঐ সার্ভারে স্থানান্তরিত হবে। \n"
-"আপনার রিপোর্টে lspci আউটপুট, কার্নেল সংস্করণ এবং /proc/cpuinfo জাতীয় প্রয়োজনীয় "
-"তথ্য সংযুক্ত করুন।"
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "রিপোর্ট"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "ইনস্টল করা নেই"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "প্যাকেজ ইনস্টল করা নেই"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "ড্রেকঘড়ি"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "অনির্দিষ্ট"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "সময় অঞ্চল পরিবর্তন করো"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "সময়-অঞ্চল - ড্রেকঘড়ি"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "জি.এম.টি. - ড্রেকঘড়ি"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "আপনার কম্পিউটারের হার্ডওয়ার-ক্লক কি জি.এম.টি. সময় অনুযায়ী চলছে?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "নেটওয়ার্ক টাইম প্রোটোকল"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"আপনার কম্পিউটারটি এন.টি.পি. ব্যবহার করে কোন\n"
-"দূরবর্তী টাইম সার্ভারের সাথে সময় মিলিয়ে নিতে পারে"
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "নেটওয়ার্ক টাইম প্রোটোকল সক্রিয় করো"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "সার্ভার:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr "%s এর সাথে সিন্‌ক্রোনাইজ করতে পারছে না।"
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "রিসেট"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"নেটওয়ার্ক টাইম প্রোটোকল সক্রিয় করার জন্য\n"
-"আমাদের এনটি.পি. প্যাকেজ ইনস্টল করতে হবে\n"
-"\n"
-"আপনি কি এনটি.পি. ইনস্টল করতে চান ?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "নেটওয়ার্ক কনফিগারেশন (%d অ্যাডাপ্টার)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "গেটওয়ে:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "ইন্টারফেস:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "অনুগ্রহপূর্বক অপেক্ষা করুন"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "ইন্টারফেস"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "অবস্থা"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "হোস্টনাম: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "হোস্টনাম কনফিগার করো..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "ল্যান কনফিগারেশন"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "স্থানীয় নেটওয়ার্ক কনফিগার করো..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "প্রয়োগ"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "সংযোগ ব্যবস্থাপনা"
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr "বাছাইকৃত ডিভাইস"
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "আই.পি. কনফিগারেশন"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "ডি.এন.এস. সার্ভার"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "অনুসন্ধান ক্ষেত্র (Domain)"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "স্থির"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "ডি.এইচ.সি.পি."
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "ফ্লো কনট্রোল"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "লাইন টার্মিনেশন"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "মডেম টাইম-আউট"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "লক (Lock) ফাইল ব্যবহার করো"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "ডায়াল করার পূর্বে ডায়াল টোনের জন্য অপেক্ষা করো"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "ব্যস্ততার অপেক্ষা"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "মডেমের শব্দ"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "সক্রিয়"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "নিষ্ক্রিয়"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "মিডিয়া শ্রেণী"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "মডিউলের নাম"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "ম্যাক (Mac) ঠিকানা"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "বাস"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "বাস-এ অবস্থান"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"আপনার কম্পিউটারে কোন ইথারনেট নেটওয়ার্ক অ্যাডাপ্টার সনাক্ত করা যায় নি।  অনুগ্রহপূর্বক "
-"হার্ডওয়ার কনফিগারেশন সফটওয়ারটি চালান।"
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "নেটওয়ার্ক ইন্টারফেস অপসারণ করো"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "যে নেটওয়ার্ক ইন্টারফেসটি অপসারণ করা হবে তা বেছে নিন:"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"\"%s\" নেটওয়ার্ক ইন্টারফেস অপসারণের সময় সমস্যা হয়েছে:\n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "অভিনন্দন, \"%s\" নেটওয়ার্ক ইন্টারফেসটি সফলভাবে অপসারণ করা গিয়েছে"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "কোন আই.পি. নেই"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "কোন মাস্ক (Mask) নেই"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "সক্রিয়"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "নিষ্ক্রিয়"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "সংযুক্ত"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "সংযোগহীন"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "সংযোগ বিচ্ছিন্ন করো..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "সংযোগ স্থাপন করো..."
-
-# FIXME
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"সতর্কবাণী, অপর একটি ইন্টারনেট সংযোগ সনাক্ত করা গিয়েছে, যা সম্ভবত অপানার নেটওয়ার্ক "
-"ব্যবহার করছে"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "এখনি নিষ্ক্রিয় করো"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "এখনি সক্রিয় করো"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"আপনার সিস্টেমে কোন কনফিগারকৃত ইন্টারফেস নেই।\n"
-"'কনফিগার' চেপে প্রথমে তাদের কনফিগার করুন"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "ল্যান কনফিগারেশন"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "অ্যাডাপ্টার %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "বুট প্রোটোকল"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "বুট হওয়ার সময় সচল হয়"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"এই ইন্টারফেস এখনো কন্‌ফিগার করা হয়নি।\n"
-"ম্যান্ড্রিব লিনাক্স নিয়ন্ত্রক কেন্দ্র থেকে সহকারী \"ইন্টারফেস যুক্ত করো\" চালান"
-
-# সাম
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"আপনার সিস্টেমে কোন ইন্টারনেট সংযোগ কনফিগার করা নেই।\n"
-"অনুগ্রহপূর্বক Mandriva Linux নিয়ন্ত্রণকেন্দ্র থেকে \"%s\" চালান।"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "নতুন নেটওয়ার্ক ইন্টারফেস সেট আপ করুন (LAN, ISDN, ADSL, ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "ইন্টারনেট সংযোগ কনফিগারেশন"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "তৃতীয় DNS সার্ভার (ঐচ্ছিক)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "ইন্টারনেট সংযোগ কনফিগারেশন"
-
-# FIXME
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "ইন্টারনেট ব্যবহার"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "সংযোগের ধরন: "
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "অবস্থা:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr "GDM (গুহ্‌নোম ডিসপ্লে ম্যানেজার)"
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr "KDM (কেডিই ডিসপ্লে ম্যানেজার)"
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr "MdkKDM (ম্যান্ড্রিব লিনাক্স ডিসপ্লে ম্যানেজার)"
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr "XDM (X ডিসপ্লে ম্যানেজার)"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "একটি ডিসপ্লে ম্যানেজার বেছে নেয়া হচ্ছে"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 ডিসপ্লে ব্যবস্থাপক ব্যবহার করে আপনি চলমান এক্স উইন্ডো সিস্টেমে লগ-ইন \n"
-"করতে পারেন এবং আপনার \n"
-"স্থানীয় কম্পিউটারে একাধিক পৃথক এক্স সেশন চালাতে পারেন।"
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr ""
-"পরিবর্তন সম্পন্ন হয়েছে, আপনি কি ডি-এম (ডিসপ্লে ম্যানেজার) সার্ভিস পুনরায় চালু করতে "
-"চান?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-"আপনি সকল চলন্ত প্রোগ্রাম বন্ধ করতে যাচ্ছে এবং আপনার বর্তমান সেশন হারাতে যাচ্ছেন। "
-"আপনি কি আসলেই নিশ্চিত্‍ যে আপনি dm সার্ভিস পুনরায় চালু করতে যাচ্ছেন?"
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "ড্রেকফ্লপি"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "বুট ডিস্ক তৈরি"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "সাধারণ"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "ডিভাইস"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "কার্ণেল সংস্করণ"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "পছন্দ"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "অগ্রসর পছন্দ"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "আকার"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Mkinitrd'র ঐচ্ছিক আর্গুমেন্ট"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "জোরপূর্বক"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "রেইড (RAID) মডিউল বাদ দাও"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "যদি প্রয়োজন হয়"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "SCSI মডিউল বাদ দাও"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "একটি মডিউল সংযুক্ত করুন"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "একটি মডিউল সরিয়ে ফেলুন"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "নিশ্চিত হোন যে ডিভাইস %s এর জন্য কোন মিডিয়া উপস্থিত আছে"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"%s ডিভাইসের জন্য কোন মিডিয়াম নেই অথবা তার লেখার অনুমতি নেই।\n"
-"অনুগ্রহ করে একটি প্রবেশ করান।"
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "ফর্ক করতে ব্যর্থ: %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "ফ্লপি তৈরি সম্পন্ন হয়েছে"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "বুট ফ্লপি তৈরি সফলভাবে সম্পন্ন হয়েছে \n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"mkbootdisk সঠিকভাবে বন্ধ করতে ব্যর্থ:\n"
-"\n"
-"<span foreground=\"লাল\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "ইনস্টলকৃত ফন্টগুলো খোঁজো"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "ইনস্টলকৃত ফন্টগুলো অনির্বাচিত করো"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "সকল ফন্টে পার্স করো"
-
-# ##সকল ফন্টে দাড়ি,কমা দিন  ---Fix me
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "কোন ফন্ট পাওয়া যায়নি"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "করা হয়েছে"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "আপনার মাউন্টকৃত পার্টিশনে কোন ফন্ট খুঁজতে পারছে না"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "সঠিক ফন্টগুলো পুনরায় নির্বাচিত করো"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "কোন ফন্ট খুঁজতে পারেনি।\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "ইনস্টলকৃত তালিকায় ফন্ট খোঁজো"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "%s ফন্টগুলোর পরিবর্তন"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "ফন্টগুলোর কপি"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "ট্রু-টাইপ ফন্টের ইনস্টলেশন"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "অনুগ্রহ করে ttmkfdir... করার মুহুর্তে অপেক্ষা করুন"
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "ট্রু-টাইপ ইনস্টল হয়ে গেছে"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "type1inst তৈরী হচ্ছে"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "ঘোস্টস্ক্রিপ্ট রেফারেন্স করা হয়েছে"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "অল্পস্থায়ী ফাইলগুলো দমন করো"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "XFS পুনরায় চালু করো"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "ফন্টের ফাইলগুলো দমন করো"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "xfs পুনরায় চালু করো"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"কোন ফন্ট ইনস্টল করার আগে, নিশ্চিত হোন যে সেগুলো আপনার সিস্টেমে ব্যবহার ও ইনস্টল "
-"করার অধিকার আপনার আছে।\n"
-"\n"
-"-আপনি সাধারণ উপায়ে ফন্ট ইনস্টল করতে পারেন। খুব অল্প ক্ষেত্রে, ভুয়া ফন্ট আপনার এক্স(X) "
-"সার্ভারকে হ্যাং করে ফেলতে পারে।"
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "ফন্টের তালিকা"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "সম্বন্ধে"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "আন-ইনস্টল"
-
-# ## Fix me
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "ইমপোর্ট"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"স্বত্বাধিকারী (C) ২০০১-২০০২ ম্যান্ড্রিব সফ্‌ট কর্তৃক \n"
-"\n"
-"\n"
-"       ডুপন্ট সেবাস্তিয়ান (মূল সংস্করণ)\n"
-"\n"
-"       চওমেট্টে ডেমিয়েন <dchaumette@mandriva.com>\n"
-"\n"
-"       ভিগ্‌নড থিয়েরী <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"এই প্রোগ্রামটি বিনামূল্যের সফটওয়্যার; আপনি এটি পুনরায় বিতরণ করতে পারেন এবং/অথবা\n"
-"পরিবর্তন করতে পারেন জিএনইউ জেনারেল পাবলিক লাইসেন্সের শর্তের অধীন যা ফ্রি "
-"সফটওয়্যার\n"
-"ফাউন্ডেশন কর্তৃক প্রকাশিত; সেটা ২য় ভার্সন হতে পারে, অথবা (আপনার পছন্দমত) পরের\n"
-"কোন ভার্সন হতে পারে।\n"
-"\n"
-"\n"
-"এই প্রোগ্রামটি বিতরণ হচ্ছে এই আশায় যে এটি কাজের উপযোগী হবে, কিন্তু কোনপ্রকার\n"
-"ওয়ারেন্টি ছাড়াই; এমনকি বিক্রয়যোগ্যতা বা নির্দিষ্ট বিষয়ের উপযুক্ততারও কোন\n"
-"ওয়ারেন্টি নেই। বিস্তারিত তথ্যের জন্য জিএনইউ জেনারেল পাবলিক লাইসেন্স দেখুন।\n"
-"\n"
-"\n"
-"এই প্রোগ্রামের সাথে জিএনইউ জেনারেল পাবলিক লাইসেন্সের একটি কপি আপনার \n"
-"পাওয়া উচিত; যদি না পেয়ে থাকেন, তাহলে নিম্ন ঠিকানায় লিখুন- Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"ধন্যবাদ:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t কেন্‌ বোরগেনদেল কর্তৃক:\n"
-"\t    একটি উইন্ডোজ .pfm ফাইলকে একটি .afm (Adobe Font Metrics) ফাইলে রুপান্তরিত "
-"করুন\n"
-"\n"
-"    -  type1inst:\n"
-"\t জেম্‌স ম্যাকনিকোল কর্তৃক: \n"
-"\t   type1inst fonts.dir, fonts.scale এবং Fontmap ফাইলগুলো তৈরি করে।\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  এন্ড্রু উইক্‌স, ফ্রাংক সিগার্ট, থমাস হেনলিছ, সার্গেই ববকিন কর্তৃক  \n"
-"\t    ttf ফন্ট ফাইলগুলোকে afm এবং pfb ফন্টে রুপান্তরিত করুন\n"
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "ফন্টগুলোকে সহায়তা দেবে এমন অ্যাপ্লিকেশন পছন্দ করুন:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"কোন ফন্ট ইনস্টল করার আগে, নিশ্চিত হোন যে সেগুলো আপনার সিস্টেমে ব্যবহার ও ইনস্টল "
-"করার অধিকার আপনার আছে।\n"
-"\n"
-"আপনি সাধারণ উপায়ে ফন্ট ইনস্টল করতে পারেন। খুব অল্প ক্ষেত্রে, ভুয়া ফন্ট আপনার এক্স(X) "
-"সার্ভারকে হ্যাং করে ফেলতে পারে।"
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "ঘোস্টস্ক্রিপ্ট"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "স্টারঅফিস"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "এবিওয়ার্ড"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "জেনেরিক প্রিন্টার"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "ফন্ট ফাইল অথবা ডিরেক্টরি বেছে নিন এবং 'সংযুক্ত' এ ক্লিক করুন"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "ফাইল বাছাই"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-# ####"আমদানি"
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "ফন্ট ইমপোর্ট করো"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "ফন্ট ইনস্টল করো"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "যদি আপনি নিশ্চিত থাকুন তবে এখানে ক্লিক করুন।"
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "যদি না হয় তবে এখানে।"
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "সব কিছু অনির্বাচিতকরণ"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "সব কিছু নির্বাচিত"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "লিস্ট মুছে ফেলো"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "ফন্ট আমদানি হচ্ছে"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "শুরুর দিককার পরীক্ষা"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "আপনার সিস্টেমে ফন্ট কপি করুন"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "ফন্ট ইনস্টল কর এবং রুপান্তর করো"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "ইনস্টল পরবর্তী কাজ"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "আপনার সিস্টেম থেকে ফন্ট মুছে ফেলুন"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "আনইনস্টল পরবর্তী কাজ"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "দুঃখিত, আমরা শুধু ২,৪ এবং উপরের কার্নালগুলি সাপোর্ট করি।"
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি আপাতত নিষ্ক্রিয় করা আছে"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ইন্টারনেট সংযুক্তিতে ভাগাভাগি সংক্রান্ত সেটআপ ইতিমধ্যে হয়ে গেছে।\n"
-"এটা আপাতত নিষ্ক্রিয় করা আছে।\n"
-"\n"
-"আপনি এখন কি করতে চান?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "সক্রিয়"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "পুনরায় কন্‌ফিগার"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "বাদ"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "সার্ভার সক্রিয়করণ..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি এখন সক্রিয়।"
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি বর্তমানে সক্রিয়"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ইন্টারনেট সংযুক্তিতে ভাগাভাগি সংক্রান্ত সেটআপ ইতিমধ্যে হয়ে গেছে।\n"
-"এটা বর্তমানে সক্রিয় আছে।\n"
-"\n"
-"আপনি এখন কি করতে চান?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "নিষ্ক্রিয়"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "সার্ভার নিষ্ক্রিয়করণ..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "ইন্টারনেট সংযুক্তিতে ভাগাভাগি এখন নিষ্ক্রিয়।"
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"আপনি আপনার কম্পিউটারের ইন্টারনেট সংযুক্তি ভাগাভাগি করার জন্য কন্‌ফিগার প্রায় করে "
-"ফেলেছেন।\n"
-"এই বৈশিষ্ট্যের কারণে, আপনার লোকাল নেটওয়ার্কে থাকা অন্য কম্পিউটারগুলো এই কম্পিউটারের "
-"ইন্টারনেট সংযুক্ত ব্যবহার করতে পারবে।\n"
-"\n"
-"পরবর্তী কোন কাজ করার আগে নিশ্চিত করুন যে drakconnect দিয়ে আপনার নেটওয়ার্ক/"
-"ইন্টারনেটে প্রবেশ কন্‌ফিগার করেছেন।\n"
-"\n"
-"নোট: স্থানীয় এরিয়া নেটওয়ার্ক (LAN) করার জন্য আপনার একটি নেটওয়ার্ক এডাপ্টর লাগবে।"
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "ইন্টারফেস %s (%s মডিউল ব্যবহার করে)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "ইন্টারফেস %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "আপনার সিস্টেমে কোন নেটওয়ার্ক এডাপ্টর নেই!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "নেটওয়ার্ক ইন্টারফেস"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"আপনার সিস্টেমে একটিমাত্র কন্‌ফিগার করা নেটওয়ার্ক এডাপ্টর আছে:\n"
-"\n"
-"%s\n"
-"\n"
-"আমি আপনার স্থানীয় এরিয়ার নেটওয়ার্ক সেই এডাপ্টরের সাথে করতে যাচ্ছি।"
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "নেটওয়ার্ক ইন্টার্ফেস পছন্দ করুন"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"আপনার স্থানীয় এরিয়া নেটওয়ার্কে কোন নেটওয়ার্ক এডাপ্টর যুক্ত হবে তা অনুগ্রহ করে পছন্দ "
-"করুন।"
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "নেটওয়ার্ক ইন্টারফেস ইতিমধ্যে কন্‌ফিগার হয়ে গেছে"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"সাবধান, %s নেটওয়ার্ক এডাপ্টরটি ইতিমধ্যে কন্‌ফিগার হয়ে গেছে।\n"
-"\n"
-"আপনি কি এটি স্বয়ংক্রিয়ভাবে পুনরায় কন্‌ফিগার করতে চান?\n"
-"\n"
-"আপনি এটি নিজে নিজে করতে পারেন কিন্তু আপনাকে জানতে হবে যে আপনি কি করছেন।"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "স্বয়ংক্রিয়ভাবে পুনরায় কন্‌ফিগার"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "না (শুধুমাত্র অভিজ্ঞরা)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "বর্তমান ইন্টারফেস কন্‌ফিগারেশন দেখাও"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "বর্তমান ইন্টারফেস কন্‌ফিগারেশন"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"`%s' এর বর্তমান কন্‌ফিগারেশন:\n"
-"\n"
-"নেটওয়ার্ক: %s\n"
-"আইপি (IP) অ্যাড্রেস: %s\n"
-"আইপি (IP) attribution: %s\n"
-"ড্রাইভার: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"আমি আপনার বর্তমান কন্‌ফিগারেশন বজায় রাখতে পারি এবং আশা করছি আপনি ইতিমধ্যেই একটি "
-"DHCP সার্ভার সেটআপ করেছেন; সেক্ষেত্রে অনুগ্রহ করে দেখে নিন যে আমি আপনার ব্যবহৃত "
-"স্থানীয় নেটওয়ার্ক সঠিকভাবে পড়তে পারি কিনা; আমি এটা পুনরায় কন্‌ফিগার করব না এবং "
-"আমি আপনার DHCP সার্ভার কন্‌ফিগারেশনে স্পর্শ করব না।\n"
-"\n"
-"ডিফল্ট DNS হচ্ছে Caching Nameserver যা ফায়ারওয়ালে (Firewall) কন্‌ফিগার করা আছে। "
-"আপনি আপনি আপনার ISP DNP IP  দিয়ে তা প্রতিস্থাপিত করতে পারেন, উদাহরণস্বরুপ।\n"
-"\t\t      \n"
-"অন্যথায়, আমি আপনার ইন্টারফেস পুনরায় কন্‌ফিগার করতে পারি এবং আপনার জন্য একটি DHCP "
-"সার্ভার (পুনরায়)কন্‌ফিগার করতে পারি।\n"
-"\n"
-
-# ##msgstr "স্থানীয় নেটওয়ার্ক ঠিকানা"
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "স্থানীয় নেটওয়ার্ক অ্যাড্রেস"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"DHCP সার্ভার কন্‌ফিগারেশন।\n"
-"\n"
-"এখানে আপনি DHCP সার্ভার কন্‌ফিগার করার জন্য বিভিন্ন অপশন পছন্দ করতে পারেন।\n"
-"যদি কোন অপশন না বুঝতে পারেন, তাহলে যেমন আছে তেমনই রেখে দিন।"
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(এই) DHCP সার্ভার আই-পি(IP)"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "DNS সার্ভার আই-পি(IP)"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "অন্তঃস্থ ডোমেইন নাম"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "DHCP সীমার শুরু"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "DHCP সীমার শেষ"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "ডিফল্ট লীজ(lease) (সেকেন্ডে)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "সর্বোচ্চ লীজ(lease) (সেকেন্ডে)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "ইন্টারফেস এবং DHCP  সার্ভার পুনরায় কন্‌ফিগার করো"
-
-# #মুক্ত করছে নাকি হচ্ছে -----Fix me
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "স্থানীয় নেটওয়ার্ক `.0' দিয়ে শেষ ছিল না, মুক্ত হচ্ছে।"
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s এর বর্তমান কন্‌ফিগে কার্যকরী ল্যান এড্রেস দ্বন্দ্ব পাওয়া গিয়েছিল!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "কন্‌ফিগার হচ্ছে..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "স্ক্রীপ্ট কন্‌ফিগার হচ্ছে, সফটওয়্যার ইনস্টল হচ্ছে, সার্ভার চালু হচ্ছে..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "%s প্যাকেজ ইনস্টলে সমস্যা"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"সবকিছু কন্‌ফিগার করা হয়েছে।\n"
-"আপনি এখন আপনার স্থানীয় এরিয়া নেটওয়ার্কে অন্যান্য কম্পিউটারের সাথে ইন্টারনেট সংযুক্তি "
-"ভাগাভাগি করতে পারেন, স্বয়ংক্রিয়ভাবে নেটওয়ার্ক কন্‌ফিগারেশন (DHCP) এবং\n"
-" একটি স্বচ্ছ প্রক্সি ক্যাশ সার্ভার (SQUID) ব্যবহার করে।"
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.১\n"
-"স্বত্বাধিকারী (C) ম্যান্ড্রিব সফ্‌ট ২০০৩-২০০৪ ।\n"
-"এটি একটি ফ্রি সফ্‌টওয়্যার এবং জি-এন-ইউ জি-পি-এল এর শর্তের অধীনে পুনরায় বিতরণ করা "
-"যেতে পারে।\n"
-"\n"
-"ব্যবহার: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - এই সাহায্য দেখাও \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_label>       - সাহায্যকারী এইচটিএমএল (html) পেজ লোড কর যা id_label "
-"এর সাথে সম্পর্ক স্থাপন করে\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr " --doc <link>          - অন্য ওয়েব পেজে সংযুক্তি\n"
-
-# সাম
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Mandriva Linux সাহায্যকেন্দ্র"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"%s দেখানো যাবে না \n"
-"এই ধরণের কোন সহায়ক এন্ট্রি নেই\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "সিস্টেম সেটিংস"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "বিবিধ সেটিংস"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "বিবিধ এবং সিস্টেম সেটিংস"
-
-# ##এডিটেবল -- Fix me
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "সম্পাদনাযোগ্য"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "পাথ"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "ব্যবহারকারী"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "গ্রুপ"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "অনুমতি"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "বর্তমান নীতি সম্পাদনা"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"এখানে আপনি অনুমতি, ব্যবহারকারী ও গ্রুপ নির্দিষ্ট করার জন্য ফাইলগুলো দেখতে পারেন।\n"
-"আপনি আপনার নিজস্ব নীতিগুলোও সম্পাদিত করতে পারেন যা ডিফল্ট নীতিগুলোকে পরিবর্তন করবে।"
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"বর্তমান নিরাপত্তা লেভেল হচ্ছে %s।\n"
-"অনুমতি নির্বাচন করুন দেখতে/সম্পাদন করতে"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "উপরে"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "নির্বাচিত নীতি এক লেভেল উপরে সরাও"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "নিচে"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "নির্বাচিত নীতি এক লেভেল উপরে সরাও"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "নীতি যোগ করো"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "সবশেষে একটি নতুন নীতি যোগ করো"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "নির্বাচিত নীতি বাদ দাও"
-
-# ##এডিট
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "সম্পাদন"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "ব্রাউজ"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "ব্যবহারকারী"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "গ্রুপ"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "অন্যান্য"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "পড়ো"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "\"%s\" ফাইলটি পড়তে সক্ষম"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "লেখো"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "\"%s\" ফাইলটি লিখতে সক্ষম"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "সম্পাদন করো"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "\"%s\" ফাইলটি সম্পাদন করতে সক্ষম"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "স্টিকি-বিট"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"ডিরেক্টরির জন্য ব্যবহৃত:\n"
-"  এই ডিরেক্টরি বা এই ডিরেক্টরিতে থাকা ফাইলগুলোর মালিক (owner) শুধুমাত্র তা মুছে "
-"ফেলতে পারে"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "সেট-ইউআইডি(UID)"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "সম্পাদন করার জন্য মালিকানা(owner) আইডি(ID) ব্যবহার করুন"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "সেট-জিআইডি(GID)"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "সম্পাদন করার জন্য গ্রুপ আইডি(ID) ব্যবহার করুন"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "ব্যবহারকারী :"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "গ্রুপ :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "বর্তমান ব্যবহারকারী"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "যখন পরীক্ষা করা হবে, তখন মালিকানা এবং গ্রুপ পরিবর্তিত হবে না"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "পাথ নির্বাচন"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "বৈশিষ্ট্য"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "PXE সার্ভার কন্‌ফিগারেশন"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "সার্ভার কন্‌ফিগারেশন ইনস্টলেশন"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"আপনি আপনার কম্পিউটারে DHCP সার্ভার হিসেবে PXE সার্ভার এবং ইনস্টলেশন সার্ভার তৈরি "
-"করতে TFTP\n"
-"সার্ভার ইনস্টল করতে কন্‌ফিগার প্রায় করে ফেলেছেন।\n"
-"এই বৈশিষ্ট্যের কারণে, আপনার লোকাল নেটওয়ার্কে থাকা অন্য কম্পিউটারগুলো এই "
-"কম্পিউটারটিকে উত্‍স হিসেবে ব্যবহার করে ইনস্টলে সক্ষম হবে।\n"
-"\n"
-"পরবর্তী কোন কাজ করার আগে নিশ্চিত করুন যে drakconnect দিয়ে আপনার নেটওয়ার্ক/"
-"ইন্টারনেটে প্রবেশ কন্‌ফিগার করেছেন।\n"
-"\n"
-"নোট: স্থানীয় এরিয়া নেটওয়ার্ক (LAN) করার জন্য আপনার একটি নেটওয়ার্ক এডাপ্টর লাগবে।"
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "অনুগ্রহ করে dhcp সার্ভারের জন্য ব্যবহৃত হবে এমন নেটওয়ার্ক ইন্টাফেস পছন্দ করুন।"
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "ইন্টারফেস %s (নেটওয়ার্কে %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP সার্ভার অন্যান্য কম্পিউটারকে নির্দিষ্ট অ্যাড্রেস সীমার মধ্যে PXE ব্যবহার করে বুট "
-"করার অনুমতি দেবে।\n"
-"\n"
-"%s নেটমাস্ক ব্যবহার করে নেটওয়ার্ক অ্যাড্রেস হচ্ছে %s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP চালুর আই-পি"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP সমাপ্তির আই-পি"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"অনুগ্রহ করে দেখিয়ে দিন যে কোথায় ইনস্টলেশনের ইমেজ পাওয়া যাবে।\n"
-"\n"
-"যদি ইতিমধ্যে তৈরি কোন ডিরেক্টরি আপনার না থাকে, অনুগ্রহ করে সিডি বা ডিভিডি'র "
-"কনটেন্ট কপি করুন।\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "ইনস্টলেশন ইমেজ ডিরেক্টরি"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "কোন ইমেজ পাওয়া যায়নি"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"কোন সিডি বা ডিভিডি ইমেজ পাওয়া যায়নি, অনুগ্রহ করে ইনস্টলেশন প্রোগ্রাম এবং rpm "
-"ফাইলগুলো কপি করুন।"
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"অনুগ্রহ করে দেখিয়ে দিন যে কোথায় auto_install.cfg ফাইলটি আছে।\n"
-"\n"
-"আপনি যদি স্বয়ংক্রিয় ইনস্টলেশন মুড সেটআপ করতে না চান তাহলে এটিকে খালি রেখে দিন।\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "auto_install.cfg ফাইলের জায়গা"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-# ##বাতিল
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "মোড"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "চ্যানেল"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "নেটওয়ার্ক:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr ""
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "মোড:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "এনক্রিপশন:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr ""
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "বন্ধ"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "সংযোগ স্থাপন করো"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr ""
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "স্ট্যাটাস"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "সংযোগ বিচ্ছিন্ন করো"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "রিফ্রেশ"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "চালু"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "সব"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "স্থানীয়"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "অগ্রাহ্য"
-
-# সাম :s
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"এখানে, আপনি আপনার মেশিনের নিরাপত্তা স্তর এবং অ্যাডমিনস্ট্রেটর সেটআপ করতে পারেন।\n"
-"\n"
-"\n"
-"যদি '<span weight=\"bold\">নিরাপত্তা সতর্কতা সংকেত</span>' অপশন সেট করা থাকে,\n"
-"'<span weight=\"bold\"> নিরাপত্তা অ্যাডমিনিস্ট্রেটর</span>' সতর্কতাগুলো পেয়ে "
-"থাকেন। অ্যাডমিনিস্ট্রেটর একজন ব্যবহারকারীর নাম অথবা ই-মেইল হতে পারে।\n"
-"\n"
-"\n"
-"'<span weight=\"bold\">নিরাপত্তা স্তর</span>' মেনু আপনাকে msec থেকে সরবরাহকৃত "
-"এবং কনফিগার করা ছয়টি স্তরের\n"
-"মধ্যে যেকোন একটি বেছে নেয়ার সুযোগ দেবে। এই স্তরগুলো '<span weight=\"bold"
-"\">নিম্নমানের</span>'নিরাপত্তা\n"
-"ও ব্যবহারের স্বাচ্ছন্দ্য থেকে, স্পর্শকাতর সার্ভার অ্যাপ্লিকেশনের জন্য প্রযোজ্য '<span "
-"weight=\"bold\">প্যারানয়েড</span>কনফিগারেশন পর্যন্ত বিস্তৃত:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">নিম্নমান</span>: এটি একটি সম্পূর্ণ অনিরাপদ,\n"
-"কিন্তু সহজে ব্যবহারযোগ্য নিরাপত্তা স্তর। নেটওয়ার্কে যুক্ত নয় এবং সবাই প্রবেশ করতে পারে "
-"না,\n"
-"শুধুমাত্র এমন মেশিনে এ স্তর ব্যবহার করা উচিত।\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">আদর্শ</span>: যেসব কম্পিউটার ক্লায়েন্ট হিসেবে\n"
-"ইন্টারনেটে সংযুক্ত হয়, সেসব মেশিনের জন্য এটি আদর্শ\n"
-"নিরাপত্তা স্তর।\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">উচ্চমান</span>: এখানে অনেক সীমাবদ্ধতা প্রয়োগ "
-"করা হয় এবং\n"
-"প্রতিরাতে স্বয়ংক্রিয় পরীক্ষা চালু করা হয়।\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">উচ্চতর</span>: এ স্তরে নিরাপত্তা অনেক বেশি এবং\n"
-"সিস্টেমটি সার্ভার হিসেবে ব্যবহারযোগ্য, যা কিনা অন্যান্য ক্লায়েন্ট থেকে সংযুক্তি গ্রহন "
-"করে যদি আপনার\n"
-"মেশিনটি ইন্টারনেটে শুধুমাত্র ক্লায়েন্ট হিসেবে সংযুক্ত থাকে তাহলে এরচেয়ে অল্পমানের স্তর "
-"ব্যবহার করা উচিত।\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">প্যারানয়েড</span>: এটিও পূর্বের স্তরের মতই,\n"
-"কিন্তু সিস্টেম পুরোপুরি সীমাবন্ধ এবং সম্ভাব্য সর্বোচ্চ\n"
-"নিরাপত্তা প্রয়োগ হয়"
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"ফিল্ডগুলোর বর্ণনা:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(ডিফল্ট মান: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "নিরাপত্তা লেভেল:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "নিরাপত্ত ব্যবস্থাপক:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "বেসিক অপশন"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "নেটওয়ার্ক অপশন"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "সিস্টেম অপশন"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "পুনরাবৃত্তি পরীক্ষা"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "অনুগ্রহ করে অপেক্ষা করুন, নিরাপত্তা লেভেল সেট করা হচ্ছে..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "অনুগ্রহ করে অপেক্ষা করুন, নিরাপত্তা অপশনগুলো সেট করা হচ্ছে..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "কোন সাউন্ড কার্ড সনাক্ত করা যায়নি!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"আপনার মেশিনে কোন সাউন্ডকার্ড পাওয়া যায়নি। অনুগ্রহ করে ভালভাবে দেখুন একটি লিনাক্স-"
-"সমর্থিত সাউন্ডকার্ড সঠিকভাবে লাগানো আছে।\n"
-" \n"
-"\n"
-"আপনি আমাদের হার্ডওয়ার ডাটাবেজে ঘুরে আসতে পারেন:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"নোট: যদি আপনার ISA PnP সাউন্ডকার্ড থাকে, তাহলে আপনাকে alsaconf বা sndconfig "
-"প্রোগ্রাম ব্হব্যবহার করতে হবে। কনসোলে শুধুমাত্র \"alsaconf\" বা \"sndconfig\" "
-"ব্যবহার করুন।"
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"কন্‌ফিগারেশন সম্পূর্ণ করার জন্য 'ImageMagic' প্যাকেজটি প্রয়োজন।\n"
-"'ImageMagic' ইনস্টল করতে \"ঠিক আছে\" অথবা পরিত্যাগ করতে \"বাতিল\" ক্লিক করুন"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"বর্ণসংখ্যায়\n"
-"টেক্সট বাক্সের X অক্ষ"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"বর্ণসংখ্যায়\n"
-"টেক্সট বাক্সের y অক্ষ"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "টেক্সটের প্রস্থতা"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "টেক্সট্ বক্সের উচ্চতা"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"এটার উপরের বাম কোণা থেকে\n"
-"প্রোগ্রেস বারের x অক্ষ"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"এটার উপরের বাম কোণা থেকে\n"
-"প্রোগ্রেস বারের y অক্ষ"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "প্রোগ্রেস বারের প্রস্থ"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "প্রোগ্রেস বারের উচ্চতা"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "কনসোলে লোগো দেখাও"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "থীমের নাম"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "ফাইনাল রেজুলেশন"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "থীম সংরক্ষণ করো"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "bootsplash থীম সেভ করা হচ্ছে..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "ছবি (image) পছন্দ করুন"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "প্রোগ্রেসবারের রং নির্বাচন"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr "সিরিয়াল পোর্ট বা ইউএসবি তারের মাধ্যমে সংযুক্ত"
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "একটু UPS ডিভাইস যোগ করো"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"UPS কনফিগারেশন ইউটিলিটিতে স্বাগতম।\n"
-"\n"
-"এখানে আপনি আপনার  সিস্টেমের জন্য একটি নতুন UPS যোগ করতে পারবেন।\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-"আমরা একটি UPS ডিভাইস যোগ করতে যাচ্ছি।\n"
-"\n"
-"আপনি কি এই মেশিনের সাথে সংযুক্ত UPS ডিভাইস সয়ংক্রিয় সনাক্ত করতে চান অথবা?"
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "সয়ংক্রিয় সনাক্ত"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "সনাক্তকরনে উন্নতি হচ্ছে"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "স্বাগতম"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "উইজার্ড সফলভাবে নিম্নলিখিত ইউ-পি-এস যন্ত্রগুলো সংযোজিত করেছে:"
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "নতুন কোন ইউ-পি-এস যন্ত্র পাওয়া যায়"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "ইউ-পি-এস ড্রাইভার কন্‌ফিগারেশন"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "অনুগ্রহ করে আপনার ইউ-পি-এস মডেল নির্বাচন করুন।"
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "প্রস্তুতকারক / মডেল:"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-"আমরা \"%s\" থেকে \"%s\" ইউ-পি-এস'টি কন্‌ফিগার করছি।\n"
-"অনুগ্রহ করে এটার নাম, এটার ড্রাইভার এবং এটার পোর্ট পূরণ করুন।"
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "নাম:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr "আপনার ইউ-পি-এস এর নাম"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr "আপনার ইউ-পি-এস কে পরিচালিত ড্রাইভার"
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "পোর্ট:"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "যে পোর্টে আপনার ইউ-পি-এস সংযুক্ত"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "উইজার্ড সফলভাবে নতুন \"%s\" ইউ-পি-এস যন্ত্রটি কন্‌ফিগার করেছে।"
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "ইউ-পি-এস যন্ত্র"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "নাম"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "ইউ-পি-এস ব্যবহারকারী"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr "প্রবেশ পরিচালনার তালিকা"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr "আই-পি মাস্ক"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "নীতিমালা"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "কাজ"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "লেভেল"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "এ-সি-এল (ACL) নাম"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUPS"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "ইউ-পি-এস কন্‌ফিগারেশন টুলে স্বাগতম"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "VPN সংযুক্তি সক্রিয়।"
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"VPN সংযুক্তির সেটআপ ইতিমধ্যে হয়ে গেছে।\n"
-"\n"
-"এটা এখন সক্রিয় অবস্থায় আছে।\n"
-"\n"
-"আপনি কি করতে পছন্দ করছেন?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "VPN নিষ্ক্রিয় হচ্ছে..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "VPN সংযুক্তি এখন নিষ্ক্রিয়।"
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "VPN সংযুক্তি বর্তমানে নিষ্ক্রিয়"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"VPN সংযুক্তির সেটআপ ইতিমধ্যে হয়ে গেছে।\n"
-"\n"
-"এটা এখন নিষ্ক্রিয় অবস্থায় আছে।\n"
-"\n"
-"আপনি কি করতে পছন্দ করছেন?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "VPN সক্রিয় হচ্ছে..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "VPN সংযোগ এখন সক্রিয়।"
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "সাধারণ VPN সেটআপ।"
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-"আপনি আপনার কম্পিউটারের VPN সংযুক্তির কন্‌ফিগার প্রায় করে ফেলেছেন।\n"
-"\n"
-"এই বৈশিষ্ট্যের কারণে, আপনার ব্যক্তিগত লোকাল নেটওয়ার্কে থাকা অন্য কম্পিউটারগুলো\n"
-"এবং অন্যান্য দূরবর্তী ব্যক্তিগত নেটওয়ার্কে থাকা কম্পিউটারগুলো, তাদের ফায়ারওয়ালের\n"
-"মাধ্যমে, ইন্টারনেটে, নিরাপত্তা সহযোগে, সেগুলোর রিসোর্স ভাগাভাগি করতে পারেন। \n"
-"\n"
-"ইন্টারনেটে যোগাযোগ এনক্রিপ্ট হয়ে হয়। স্থানীয় এবং দূরবর্তী কম্পিউটারগুলো\n"
-"দেখুন যদি সেগুলো একই নেটওয়ার্কে থাকে।\n"
-"\n"
-"অন্য উপায় না দেখে নিশ্চিত হোন যে drakconnect ব্যবহার করে আপনার\n"
-"নেটওয়ার্ক ও ইন্টারনেট ব্যবহার কন্‌ফিগার করা হয়েছে।"
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-"VPN সংযুক্তি।\n"
-"\n"
-"এই প্রোগ্রামটি নিম্নলিখিত প্রোজেক্টের উপর নির্ভরশীল:\n"
-" - ফ্রিসুয়ান: \t\t\thttp://www.freeswan.org/\n"
-" - সুপার-ফ্রিসুয়ান: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-টুল্‌স: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - তথ্য এবং ম্যান পেজগুলো %s প্যাকেজের সাথে আসে\n"
-"\n"
-"অন্যান্য ক্ষেত্রে যাওয়ার আগে অনুগ্রহ করে অন্ততপক্ষে\n"
-" ipsec-howto নথিগুলো পড়ুন।"
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "কার্নেল মডিউল।"
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-"কার্ণেলের ipsec সহায়ক হওয়া প্রয়োজন।\n"
-"\n"
-"আপনি কার্ণেলের %s সংস্করণ চালাচ্ছেন।\n"
-"\n"
-"এই কার্ণেলের '%s' সহায়তা আছে।"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "নিরাপত্তা নীতি"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "IKE ডেমন্‌ racoon"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "কন্‌ফিগারেশন ফাইল"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-"কন্‌ফিগারেশনের ধাপ !\n"
-"\n"
-"আপনাকে নিরাপত্তা নীতি বলে দিতে হবে এবং তারপর \n"
-"স্বয়ংক্রিয় কী পরিবর্তন (IKE) ডেমন্‌ কন্‌ফিগার করতে হবে। \n"
-"আমরা যে KAME IKE ডেমন্‌ ব্যবহার করছি তাকে 'racoon' বলা হয়।\n"
-"\n"
-"আপনি কি কন্‌ফিগার করতে পছন্দ করছেন?\n"
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-"পরবর্তীতে, আমরা %s ফাইলটি কন্‌ফিগার করব।\n"
-"\n"
-"\n"
-"শুধুমাত্র পরবর্তী'তে ক্লিক করুন।\n"
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s এন্ট্রি"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-"%s ফাইলের বিষয়বস্তুগুলো\n"
-"বিভিন্ন সেক্‌শনে বিভক্ত থাকে।\n"
-"\n"
-"আপনি এখন করতে পারেন :\n"
-"\n"
-"  - প্রদর্শন, যোগ, সম্পাদনা, অথবা সেকশন মুছে ফেলতে পারেন, তখন\n"
-"  - পরিবর্তগুলো নিবদ্ধ করুন\n"
-"\n"
-"আপনি কি করতে পছন্দ করছেন?\n"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "প্রদর্শন করো"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "নিবদ্ধ করো"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "কন্‌ফিগারেশন প্রদর্শন করো"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-"%s ফাইলটি বিদ্যমান নেই।\n"
-"\n"
-"এটা অবশ্যই একটি নতুন কন্‌ফিগারেশন হবে।\n"
-"\n"
-"আপনাকে পূর্ব অবস্থানে যেতে হবে এবং 'যোগ করো' পছন্দ করুন।\n"
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "ipsec.conf এন্ট্রি"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"%s ফাইলের বিভিন্ন সেক্‌শন আছে।\n"
-"\n"
-"এখানে এটার ভেতরের সেক্‌শনে আছে :\t'কন্‌ফিগ সেটআপ' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'সাধারণ১'\n"
-"\t\t\t\t\t'সাধারণ২' \n"
-"\n"
-"আপনি এখন যেকোন একটি সেক্‌শন যোগ করতে পারেন।\n"
-"\n"
-"আপনি যে সেক্‌শনটি পছন্দ করুন সেটা বেছে নিন।\n"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "কন্‌ফিগ সেটআপ"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "সাধারণ conn"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "বিদ্যমান !"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-"এই নামের একটি সেক্‌শন ইতিমধ্যেই বিদ্যমান আছে।\n"
-"এই সেক্‌শনর নামটি অদ্বিতীয় হতে হবে।\n"
-"\n"
-"আপনাকে পূর্ব অবস্থানে ফিরে যেতে হবে এবং অন্য সেক্‌শন যোগ করতে\n"
-"হবে অথবা এটার নাম পরিবর্তন করতে হবে।\n"
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"এটি আপনার %s ফাইলের উপরে\n"
-"থাকতে হবে।\n"
-"\n"
-"নিশ্চিত হোন যে অন্যান্য সব সেক্‌শন এই কন্‌ফিগ সেটআপ\n"
-"মেনে নেবে।\n"
-"\n"
-"চালিয়ে যাও অথবা পূর্ববর্তী পছন্দ করুন যখন আপনার কাজ হয়ে যাবে।\n"
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "ইন্টারফেস"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsডিবাগ"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "প্লুটোডিবাগ"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "প্লুটোচালু"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "প্লুটোশুরু"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "অদ্বিতীয়আইডি"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-"একবার কন্‌ফিগ সেটআপ করার পর\n"
-"এটা হচ্ছে প্রথম সেক্‌শন।\n"
-"\n"
-"এখানে আপনি ডিফল্ট সেটিংস নির্দিষ্ট করে দিতে পারেন। \n"
-"অন্য সব সেক্‌শন এটা মেনে চলবে।\n"
-"বামের এই সেটিংসটি ঐচ্ছিক। যদি এগুলোকে সবার জন্য নির্দিষ্ট\n"
-"করে দিতে না চান, তাহলে প্রত্যেক সেক্‌শন আলাদা করে নির্দিষ্ট করে\n"
-"দিতে পারেন।\n"
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "পি-এফ-এস"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "সংক্ষিপ্ত"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "বাম"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "বামসার্ট"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "বামrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "বামসাবনেট"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "বামnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"আপনার %s ফাইলের কয়েকটি সেক্‌শন, অথবা সংযুক্তি আছে।\n"
-"\n"
-"আপনি এখন একটি নতুন সেক্‌শন যোগ করতে পারেন।\n"
-"যখন আপনার তথ্য লেখা শেষ হবে তখন চালিয়ে যাও পছন্দ করুন।\n"
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "অংশের নাম"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "অনুমোদিত"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "স্বয়ংক্রিয়"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "ডান"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "ডানসার্ট"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "ডানrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "ডানসার্ট"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "ডানnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-"এই নামের একটি সেক্‌শন ইতিমধ্যেই বিদ্যমান আছে।\n"
-"সংযুক্তির নাম অদ্বিতীয় হতে হবে।\n"
-"\n"
-"আপনাকে পেছনে যেতে হবে এবং অন্য একটি সেক্‌শন যোগ করতে\n"
-"অথবা সেক্‌শনের নাম পরিবর্তন করতে হবে।\n"
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"একটি নিরাপত্তা নীতি যোগ করো।\n"
-"\n"
-"আপনি এখন একটি নিরাপত্তা নীতি যোগ করতে পারেন।\n"
-"\n"
-"যখন আপনার তথ্য লেখা হয়ে যাবে তখন চালিয়ে যাও পছন্দ করুন।\n"
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "সেক্‌শন সম্পাদনা"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-"আপনার %s ফাইলের কয়েকটি সেক্‌শন অথবা সংযুক্তি আছে।\n"
-"\n"
-"সম্পাদনার জন্য আপনি নিচের যে কোন একটি ফাইল পছন্দ \n"
-"করতে পারেন এবং তখন পরবর্তী'তে ক্লিক করতে পারেন।\n"
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "সেক্‌শনগুলোর নাম"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "সম্পাদনা করা যাচ্ছেনা !"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-"আপনি এই সেক্‌শন সম্পাদনা করতে পারেন না।\n"
-"\n"
-"এই সেক্‌শনটি শুধুমাত্র Freeswan 2.X এর জন্য।\n"
-"%s ফাইলের উপর একজনকে সংস্করণ ২.০ নির্দিষ্ট করে\n"
-"দিতে হবে, এবং নিষ্ক্রিয় বা\n"
-"সক্রিয় করতে হবে opportunistic encryption।\n"
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"আপনার %s ফাইলের বেশকিছু অংশ আছে।\n"
-"\n"
-"আপনি এখন কন্‌ফিগ সেটআপ অংশের এন্ট্রি সম্পাদনা করতে পারেন।\n"
-"তথ্য লিখে ফেলতে আপনি চালিয়ে যাও পছন্দ করুন।\n"
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"আপনার %s ফাইলের বেশকিছু অংশ বা সংযুক্তি আছে।\n"
-"\n"
-"আপনি এখন ডিফল্ট অংশের এন্ট্রি সম্পাদনা করতে পারেন।\n"
-"তথ্য লিখে ফেলতে আপনি চালিয়ে যাও পছন্দ করুন।\n"
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"আপনার %s ফাইলের বেশকিছু অংশ বা সংযুক্তি আছে।\n"
-"\n"
-"আপনি এখন স্বাভাবিক অংশের এন্ট্রি সম্পাদনা করতে পারেন।\n"
-"\n"
-"তথ্য লিখে ফেলতে আপনি চালিয়ে যাও পছন্দ করুন।\n"
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"নিরাপত্তা নীতি সম্পাদনা করো।\n"
-"\n"
-"আপনি এখন নিরাপত্তা নীতি যোগ করতে পারেন।\n"
-"\n"
-"তথ্য লিখে ফেলতে আপনি চালিয়ে যাও পছন্দ করুন।\n"
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "সেকশন মুছে ফেলো"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-"আপনার %s ফাইলের বেশকিছু অংশ বা সংযুক্তি আছে।\n"
-"\n"
-"আপনি নিচের কোন একটিকে মুছতে চাইলে পছন্দ করুন\n"
-"এবং পরবর্তী'তে ক্লিক করুন।\n"
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-"racoon.conf ফাইলের কন্‌ফিগারেশন।\n"
-"\n"
-"এই ফাইলের বিষয়বস্তুগুলো বিভিন্ন অংশে বিভক্ত।\n"
-"আপনি এখন করতে পারেন:\n"
-"  - প্রদর্শন \t\t (ফাইলের বিষয়বস্তু প্রদর্শন করতে)\n"
-"  - যোগ \t\t (একটি অংশ যোগ করতে)\n"
-"  - সম্পাদনা \t\t (বিদ্যমান অংশের প্যারামিটারে পরিবর্তন করতে)\n"
-"  - মুছো \t\t (বিদ্যমান অংশ মুছে ফেলতে)\n"
-"  - নিবদ্ধ \t\t (বাস্তব ফাইলের পরিবর্তন লিখতে)"
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-"%s ফাইলটি বর্তমান নেই।\n"
-"\n"
-"এটা অবশ্যই কোন কন্‌ফিগারেশন হবে।\n"
-"\n"
-"আপনাকে পেছনে ফিরতে হবে এবং কন্‌ফিগার বেছে নিতে হবে।\n"
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "racoon.conf এন্ট্রি"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"'যোগ করো' সেক্‌শনের ধাপ।\n"
-"\n"
-"এখানে নিচে racoon.conf ফাইলের স্কেলেটন :\n"
-"\t'পাথ'\n"
-"\t'দূরবর্তী'\n"
-"\t'sainfo'\n"
-"\n"
-"যে সেক্‌শনটি যোগ করতে চান তা পছন্দ করুন।\n"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "পাথ"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "দূরবর্তী"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-"'পাথ যোগ করো' অংশের ধাপ।\n"
-"\n"
-"পাথের অংশটা আপনার racoon.conf ফাইলের উপরে থাকে।\n"
-"\n"
-"অনলাইনে সাহায্য পাওয়ার জন্য আপনার মাউসটি সার্টিফিকেট এন্ট্রি'র উপর রাখুন।"
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "পাথের ধরণ"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-# "পাথ যোগ করার পাথ : একটি ফাইল যুক্ত করার জন্য নির্দিষ্ট পাথ\n"
-# "দেখিয়ে দিন। ফাইল Inclusion দেখিয়ে দিন।\n"
-# "\tউদাহরণস্বরুপ: '/etc/racoon' যুক্ত করার পাথ\n"
-# "\n"
-# ""
-# Real Sugar = আসল চিনি
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "আসল ফাইল"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"নিশ্চিত হোন যে আপনার racoon.conf ফাইলের উপরে ইতিমধ্যেই\n"
-"আপনার পাথে'র অংশ আছে।\n"
-"\n"
-"আপনি দূরবর্তী সেটিংস পছন্দ করতে পারেন।\n"
-"যখন আপনার কাজ শেষ হবে তখন চালিয়ে যাও বা পূর্ববর্তী পছন্দ করুন।\n"
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"নিশ্চিত হোন যে আপনার %s ফাইলের উপরে ইতিমধ্যেই\n"
-"আপনার পাথের অংশ আছে।\n"
-"\n"
-"আপনি sainfo সেটিংস পছন্দ করতে পারেন।\n"
-"যখন আপনার কাজ শেষ হবে তখন চালিয়ে যাও বা পূর্ববর্তী পছন্দ করুন।\n"
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-"আপনার %s ফাইলের কয়েকটি অংশ বা সংযুক্তি আছে।\n"
-"\n"
-"নিচে দেয়া তালিকা থেকে আপনি যে কোন একটি সম্পাদনা করার জন্য\n"
-"বেছে নিতে পারেন এবং তখন পরবর্তী'র উপর ক্লিক করুন।\n"
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"আপনার %s ফাইলের কয়েকটি অংশ আছে।\n"
-"\n"
-"আপনি দূরবর্তী অংশের এন্ট্রিগুলো সম্পাদনা করতে পারেন।\n"
-"\n"
-"যখন আপনার তথ্য লেখা শেষ হবে তখন চালিয়ে পছন্দ নিন।\n"
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-"আপনার %s ফাইলের কয়েকটি অংশ আছে।\n"
-"\n"
-"আপনি sainfo অংশের এন্ট্রিগুলো সম্পাদনা করতে পারেন।\n"
-"\n"
-"যখন আপনার তথ্য লেখা শেষ হবে তখন চালিয়ে পছন্দ নিন।"
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"এই সেক্‌শনটি আপনার %s ফাইলের উপরে\n"
-"রাখতে হবে।\n"
-"\n"
-"নিশ্চিত হোন যে সবগুলো সেক্‌শন এই পাথ সেক্‌শন\n"
-"অনুসরণ করবে।\n"
-"আপনি এখন পাথ এন্ট্রি সম্পাদনা করতে পারেন।\n"
-"\n"
-"যখন আপনার কাজ শেষ হবে তখন চালিয়ে যাও বা পূর্ববর্তী পছন্দ করুন।\n"
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "পাথ_টাইপ"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-"সবকিছু কন্‌ফিগার করা হয়েছে।\n"
-"\n"
-"আপনি এখন ইন্টারনেটে রিসোর্স ভাগাভাগী করতে পারেন,\n"
-"নিরাপদ পথে, VPN সংযুক্তি ব্যবহার করে।\n"
-"\n"
-"আপনার নিশ্চিত উচিত যে tunnels shorewall সেক্‌শন\n"
-"কন্‌ফিগার করা হয়েছে।"
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr "Sainfo উত্‍সের ঠিকানা"
-
-# #msgstr "Sainfo উত্‍সের অ্যাড্রেস"
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-"sainfo (উত্‍স_আইডি গন্তব্য_আইডি | anonymous) { মন্তব্য }\n"
-"IKE phase 2 প্যারামিটার নির্দিষ্ট করে দেয়\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"উত্‍স_আইডি এবং গন্তব্য_আইডি তৈরী হয় যাদের মতো:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"উদাহরণস্বরুপ : \n"
-"\n"
-"sainfo anonymous (যেকোন জায়গা থেকে সংযুক্তি গ্রহণ করে)\n"
-"\tআপনি যদি anonymous চান তাহলে এই এন্ট্রি খালি রেখে দিন\n"
-"\n"
-"sainfo ঠিকানা 203.178.141.209 যেকোন ঠিকানা 203.178.141.218 যেকোন\n"
-"\t203.178.141.209 হচ্ছে উত্‍সের ঠিকানা\n"
-"\n"
-"sainfo ঠিকানা 172.16.1.0/24 যেকোন ঠিকানা 172.16.2.0/24 যেকোনো\n"
-"\t172.16.1.0/24 হচ্ছে উত্‍সের ঠিকানা"
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr "Sainfo উত্‍সের প্রোটোকল"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-"sainfo (উত্‍স_আইডি গন্তব্য_আইডি | anonymous) { মন্তব্য }\n"
-"IKE phase 2 প্যারামিটার নির্দিষ্ট করে দেয়\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"উত্‍স_আইডি এবং গন্তব্য_আইডি তৈরী হয় যাদের মতো:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"উদাহরণস্বরুপ : \n"
-"\n"
-"sainfo anonymous (যেকোন জায়গা থেকে সংযুক্তি গ্রহণ করে)\n"
-"\tআপনি যদি anonymous চান তাহলে এই এন্ট্রি খালি রেখে দিন\n"
-"\n"
-"sainfo ঠিকানা 203.178.141.209 যেকোন ঠিকানা 203.178.141.218 যেকোন\n"
-"জায়গার প্রথম 'যেকোন' সবসময় যেকোন উত্‍স থেকে প্রোটোকল  গ্রহণ করে"
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr "Sainfo গন্তব্যের ঠিকানা"
-
-# ##msgstr "Sainfo গন্তব্যের অ্যাড্রেস"
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-"sainfo (উত্‍স_আইডি গন্তব্য_আইডি | anonymous) { মন্তব্য }\n"
-"IKE phase 2 প্যারামিটার নির্দিষ্ট করে দেয়\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"উত্‍স_আইডি এবং গন্তব্য_আইডি তৈরী হয় যাদের মতো:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"উদাহরণস্বরুপ : \n"
-"\n"
-"sainfo anonymous (যেকোন জায়গা থেকে সংযুক্তি গ্রহণ করে)\n"
-"\tআপনি যদি anonymous চান তাহলে এই এন্ট্রি খালি রেখে দিন\n"
-"\n"
-"sainfo ঠিকানা 203.178.141.209 যেকোন ঠিকানা 203.178.141.218 যেকোন\n"
-"\t203.178.141.209 হচ্ছে গন্তব্যের ঠিকানা\n"
-"\n"
-"sainfo ঠিকানা 172.16.1.0/24 যেকোন ঠিকানা 172.16.2.0/24 যেকোনো\n"
-"\t172.16.1.0/24 হচ্ছে গন্তব্যের ঠিকানা"
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr "Sainfo গন্তব্যের প্রোটোকল"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-"sainfo (উত্‍স_আইডি গন্তব্য_আইডি | anonymous) { মন্তব্য }\n"
-"IKE phase 2 প্যারামিটার নির্দিষ্ট করে দেয়\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"উত্‍স_আইডি এবং গন্তব্য_আইডি তৈরী হয় যাদের মতো:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"উদাহরণস্বরুপ : \n"
-"\n"
-"sainfo anonymous (যেকোন জায়গা থেকে সংযুক্তি গ্রহণ করে)\n"
-"\tআপনি যদি anonymous চান তাহলে এই এন্ট্রি খালি রেখে দিন\n"
-"\n"
-"sainfo ঠিকানা 203.178.141.209 যেকোন ঠিকানা 203.178.141.218 যেকোন\n"
-"জায়গার প্রথম 'যেকোন' সবসময় গন্তব্যের জন্য প্রোটোকল  গ্রহণ করে"
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "পি-এফ-এস গ্রুপ"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-"Diffie-Hellman exponentiations এর গ্রুপ নির্দিষ্ট করো।\n"
-"আপনার যদি কোন পি-এফ-এস প্রয়োজন না হয় তাহলে এই ডিরেক্টিভ মুছে ফেলতে পারেন।\n"
-"আপনি কোন একটি নির্দিষ্ত করে না দেন তাহলে প্রস্তাব গ্রহণযোগ্য হবে।\n"
-"এখানকার যেকোন একটি গ্রুপ: modp768, modp1024, modp1536।\n"
-"অথবা আপনি ১, ২, বা ৫ হিসেবে DH গ্রুপ সংখ্যাগুলো নির্দিষ্ট করে দিতে পারেন।"
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "আজীবনের নম্বর"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-"আজীবনের একটা নির্দিষ্ট সময় নির্ধারণ করুন যা phase 1 \n"
-"negotiations এ প্রস্তাবিত হবে। যেকোন প্রস্তাব গ্রহণ করা\n"
-"হবে, এবং বৈশিষ্ট্যগুলো সঙ্গীর(peer) প্রতি প্রস্তাব করা হবে না\n"
-"যদি আপনি তাকে(তাদেরকে) নির্দিষ্ট করে না দেন। তারা প্রত্যেকে\n"
-"প্রতি প্রস্তাবের পৃথকভাবে নির্দিষ্ট করে দিতে পারে।\n"
-"\n"
-"উদাহরণস্বরুপ : \n"
-"\n"
-"\t১ মিনিটের সময়সীমা;    #সেকেন্ড,মিনিট,ঘন্টা\n"
-"\t১ মিনিটের সময়সীমা;    #সেকেন্ড,মিনিট,ঘন্টা\n"
-"\t৩০ সেকেন্ডের সময়সীমা;\n"
-"\t৩০ সেকেন্ডের সময়সীমা;\n"
-"\t৬০ সেকেন্ডের সময়সীমা;\n"
-"\t১২ ঘন্টার সময়সীমা;\n"
-"\n"
-"সুতরাং, এখানে সময়সীমা সংখ্যাগুলো ১, ১, ৩০, ৬০ এবং ১২।\n"
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "আজীবনের ইউনিট"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-"আজীবনের একটা নির্দিষ্ট সময় নির্ধারণ করুন যা phase 1 \n"
-"negotiations এ প্রস্তাবিত হবে। যেকোন প্রস্তাব গ্রহণ করা\n"
-"হবে, এবং বৈশিষ্ট্যগুলো সঙ্গীর(peer) প্রতি প্রস্তাব করা হবে না\n"
-"যদি আপনি তাকে(তাদেরকে) নির্দিষ্ট করে না দেন। তারা প্রত্যেকে\n"
-"প্রতি প্রস্তাবের পৃথকভাবে নির্দিষ্ট করে দিতে পারে।\n"
-"\n"
-"উদাহরণস্বরুপ : \n"
-"\n"
-"\t১ মিনিটের সময়সীমা;    #সেকেন্ড,মিনিট,ঘন্টা\n"
-"\t১ মিনিটের সময়সীমা;    #সেকেন্ড,মিনিট,ঘন্টা\n"
-"\t৩০ সেকেন্ডের সময়সীমা;\n"
-"\t৩০ সেকেন্ডের সময়সীমা;\n"
-"\t৬০ সেকেন্ডের সময়সীমা;\n"
-"\t১২ ঘন্টার সময়সীমা;\n"
-"\n"
-"সুতরাং, এখানে সময়সীমা ইউনিটগুলো 'মিনিট', 'মিনিট', 'সেকেন্ড', 'সেকেন্ড', 'সেকেন্ড' "
-"এবং 'ঘন্টা'।\n"
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "নির্ভরযোগ্য অ্যালগোরিদম"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "সংক্ষিপ্ত করার অ্যালগোরিদম"
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr "স্ফীতি হ্রাস"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "দূরবর্তী"
-
-# সাম
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"প্রতিটি দূরবর্তী নোডের IKE ১ম পর্যায়ের প্যারামিটার নির্ধারন করে।\n"
-"ডিফল্ট পোর্ট হল ৫০০। যদি Anonymous বলা হয়ে থাকে\n"
-"statement গুলো সব peer এর ক্ষেত্রে প্রযোজ্য যেগুলো আর কোন\n"
-"দূরবর্তী ডিরেক্টিভের সাথে মিলে না।\n"
-"\n"
-"উদাহরন: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr "বিনিময় মোড"
-
-# negotiation = নিস্পত্তি প্রক্রিয়ায় 
-# initiator ‌= ইনিশিয়েটর 
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-"racoon যখন ইনিশিয়েটর তখন ১ম পর্যায়ের আদান‌-প্রদান মোড\n"
-"ঠিক করে। যখন racoon রেসপন্ডার তখন এটি গ্রহনযোগ্য\n"
-"আদান‌-প্রদান মোডও বটে। একের অধিক মোড কমা দিয়ে\n"
-"আলাদা করে দেয়া যেতে পারে। সবগুলো মোডই গ্রহনযোগ্য।\n"
-"ইনিশিয়েটর হিসেবে racoon ১ম আদান‌-প্রদান মোডটি ব্যবহার\n"
-"করে।\n"
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "সাধারন নীতি"
-
-# negotiation = নিস্পত্তি প্রক্রিয়ায় 
-# initiator ‌= ইনিশিয়েটর 
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-"এই ডিরেক্টিভটি রেসপন্ডারের জন্য। অতএব আপনাকে passive সেটিংটি\n"
-"চালু করতে হবে যাতে racoon(8) শুধু রেসপন্ডার হিসেবে কাজ করে। যদি\n"
-"রেসপন্ডারটির ২য় নিস্পত্তি প্রক্রিয়ায় কোন SPD নীতি না থাকে, এবং\n"
-"ডিরেক্টিভটি চালু থাকে, তবে racoon ইনিশিয়েটর থেকে SA পেলোডের\n"
-"প্রস্তাবটি বেছে নেবে এবং এটি থেকেই নীতিমালা তৈরী করবে। যে ক্লায়েন্টের\n"
-"IP address ডাইনামিক ভাবে দেয়া হয়, তার সাথে নিস্পত্তি করাই শ্রেয়।\n"
-"মনে রাখবেন, ইনিশিয়েটরটি রেসপন্ডারের SPD তে সঠিক নীতি ইনস্টল\n"
-"নাও করতে পারে। এই ইনিশিয়েটর ও রেসপন্ডারের মাঝে নীতির অমিলের\n"
-"কারনে অনান্য যোগাযোগ বিঘ্ন হতে পারে। ইনিশিয়েটরের ক্ষেত্রে এই\n"
-"ডিরেক্টিভটি অগ্রায্য করা হয় যার ডিফল্ট মান বন্ধ। "
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "জড়"
-
-# ##অক্রিয় / স্থির
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-"আপনি মধ্যস্থতা আরম্ভ করতে না চান, তাহলে এটাকে চালু অবস্থায়\n"
-"সেট করুন। ডিফল্টভাবে এটা বন্ধ থাকে। এটা সার্ভারের জন্য খুব\n"
-"দরকারী।"
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "সার্টিফিকেটের ধরণ"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "আমার সার্টফাইল"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "সার্টফাইলের নাম"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "আমার ব্যক্তিগত কী"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "ব্যক্তিগত কী'র নাম"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr "peers সার্টফাইল"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr "peers সার্টিফিকেটের নাম"
-
-# #Fix me
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "সার্টিফিকেট যাচাই"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-"আপনি যদি কোন কারণে সঙ্গীর (peer) সার্টিফিকেট যাচাই করতে\n"
-"না চান, তাহলে এটাকে বন্ধ হিসেবে সেট করুন। তবে ডিফল্ট হিসেবে এটি চালু অবস্থায় থাকে।"
-
-# # Fix me
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "আমার সনাক্রকারক"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr "সঙ্গী সনাক্তকারক"
-
-# ##সংগী/সঙ্গী নির্দেশক
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr "প্রস্তাব"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-"phase ১ নেগোশিয়েশনের জন্য ব্যবহৃত encryption অ্যালগোরিদম নির্দিষ্ট করুন.\n"
-"এই আদেশটি অবশ্যই বলা থাকবে।\n"
-"অ্যালগোরিদম নিচের যেকোন একটি: \n"
-"\n"
-"oakley এর জন্য DES, 3DES, blowfish, cast128 ।\n"
-"\n"
-"অন্যান্য রুপান্তরের জন্য, এই মন্তব্য ব্যবহৃত হবে না।"
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "হ্যাশ অ্যালগোরিদম"
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "DH গ্রুপ"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "কমান্ড"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "আই-পি range এর উত্‍স"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "আই-পি range এর গন্তব্য"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "উপরের স্তরের প্রোটোকল"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "যেকোন"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "ফ্ল্যাগ"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "গতিপথ"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "Ipsec নীতি"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "ipsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr "অপ্রোজনীয়"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr "টানেল"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr "বাহন"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "উত্‍স/গন্তব্য"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr "প্রয়োজন"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "ডিফল্ট"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "ব্যবহার"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "অদ্বিতীয়"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "ইউএসএ (ব্রডকাষ্ট)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "ইউএসএ (কেবল)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "ইউএসএ (কেবল-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "কানাডা (কেবল)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "জাপান (ব্রডকাষ্ট)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "জাপান (কেবল)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "কানাডা (ব্রডকাষ্ট)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "পশ্চিম ইউরোপ"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "পূর্ব ইউরোপ"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "ফ্রান্স [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "নিউজিল্যান্ড"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "অস্ট্রেলিয়ান Optus ক্যাবল টিভি"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"অনুগ্রহ করে,\n"
-"আপনার টিভি norm এবং দেশ টাইপ করুন"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "টিভির ধরন:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "জায়গা:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "টিভি চ্যানেলের খোঁজে উন্নতি হচ্ছে ..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "টিভি চ্যানেলের খোঁজ চলছে"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "টিভি চ্যানেলের খোঁজ করার সময় একটি ত্রুটি হয়েছে"
-
-# আমার মত করে লিখলাম। মাইন্ড করবেননা
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "একটি সুন্দর দিনের শুভেচ্ছা!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "আপনি এখন xawtv (X উইন্ডোর মধ্যে!) চালাতে পারবেন !\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "কোন টিভি কার্ড পাওয়া যায় নি!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"আপনি মেশিনে কোন টিভি কার্ড পাওয়া যায় নি। অনুগ্রহ করে পরীক্ষা করুন যে লিনাক্স-"
-"সমর্থিত ভিডিও/টিভি কার্ড সঠিকভাবে সংযুক্ত আছে।\n"
-"\n"
-"\n"
-"আপনি আমাদের হার্ডওয়্যার ডাটাবেজে ঘুরে আসতে পারেন:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "বিকল্প ড্রাইভার"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "এই সাউন্ড কার্ডের জন্য বিকল্প ড্রাইভারের তালিকা"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"এটা হচ্ছে ফিজিকাল বাস (physical bas) যেখানে যন্ত্রগুলো যুক্ত থাকে (যেমন: পি-সি-আই, "
-"ইউএসবি, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "বাস পরিচিতি"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- পিসিআই এবং ইউএসবি যন্ত্র: এটা নির্মাতা, যন্ত্র, সহযোগী নির্মাতা এবং সহযোগী যন্ত্র "
-"পিসিআই/ইউএসবি আই-ডি'র তালিকা করে"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- pci যন্ত্র: এটা এই কার্ডের pci স্লট, যন্ত্র এবং ফাংশন দেয়\n"
-"- eide যন্ত্র: যন্ত্রটি হয় slave অথবা master যন্ত্র\n"
-"- scsi যন্ত্র: scsi bus এবং scsi যন্ত্রের আই-ডি"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "ড্রাইভের ক্ষমতা"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "ড্রাইভের বিশেষ ক্ষমতা (বার্নিং ক্ষমতা বা DVD সাপোর্ট)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "এই ফিল্ড যন্ত্রগুলোকে বর্ণনা করে"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "পুরাতন যন্ত্র ফাইল"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "পুরাতন স্থির যন্ত্রের নাম dev প্যাকেজে ব্যবহৃত হয়"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "নতুন devfs যন্ত্র"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "কোর কার্ণেল devfs কর্তৃক তৈরীকৃত নতুন গতিশীল যন্ত্রের নাম"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "মডিউল"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "জীএনইউ(GNU)/লিনাক্স কার্ণেলের মডিউল যা যন্ত্রপাতি ব্যবহার করে"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "বর্ধিত পার্টিশনসমুহ"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "বর্ধিত পার্টিশনসমুহের সংখ্যা"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "জ্যামিতি"
-
-# #Geometry
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr "ডিস্কের সিলিন্ডার/হেড/সেক্টর জ্যামিতি"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "ডিস্ক নিয়ন্ত্রক"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr "হোস্টের দিক্‌কার ডিস্ক নিয়ন্ত্রক"
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "হার্ডওয়ার যন্ত্রের শ্রেণী"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "মডেল"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "হার্ড ডিস্কের মডেল"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "নেটওয়ার্ক প্রিন্টার পোর্ট"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "প্রাইমারী পার্টিশনসমূহ"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "প্রাইমারী পার্টিশনসমুহের সংখ্যা"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "ডিভাইস নির্মাতার নাম"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "বাস পিসিআই #"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "যেই যন্ত্রটি যুক্ত সেখানে পিসিআই বাস"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "পিসিআই ডিভাইস #"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "পিসিআই ডিভাইস নম্বর"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr "পিসিআই ফাংশন #"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr "পিসিআই ফাংশন নম্বর"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "পরিবেশক আইডি"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr "এটা হচ্ছে বিক্রেতার আদর্শ সংখ্যাভিত্তিক চিহ্নিতকারক"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "ডিভাইস আইডি:"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "এটা হচ্ছে যন্ত্রটির সংখ্যাভিত্তিক চিহ্নিতকারক"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr "সাব ভেন্ডর আইডি"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr "এটা হচ্ছে যন্ত্রটির ছোটখাটমানের সংখ্যাভিত্তিক চিহ্নিতকারক"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr "সাব ডিভাইস আইডি"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "এটা হচ্ছে যন্ত্রটির সংখ্যাভিত্তিক চিহ্নিতকারক"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "ডিভাইস ইউএসবি আইডি"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"বুট করার সময় গণনাকারী নির্ধারণ করার জন্য জি-এন-ইউ/লিনাক্স কার্ণেলের একটি গণনাকারী "
-"লুপ (loop) চালু করা প্রয়োজন। এটার ফলাফল সি-পি-ইউ'র \"benchmark\" বরাবর bogomips "
-"হিসেবে জমা থাকে।"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "ক্যাশ সাইজ"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "সি-পি-ইউ'র (দ্বিতীয় লেভেল) আকার"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Coma ত্রুটি"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "যেখানে এই সি-পি-ইউ'র Cyrix ৬x৮৬ Coma ত্রুটি আছে"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid পরিবার"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "cpu এর পরিবার (যেমন: i686 শ্রেনীর জন্য ৬)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid লেভেল"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "তথ্যসংক্রান্ত লেভেল cpuid তথ্যের মধ্য দিয়ে পাওয়া যাবে"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "ফ্রিকোয়েন্সী (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"সি-পি-ইউ ফ্রিকোয়েন্সি মেগাহার্টজে (মেগাহার্টজ যা হচ্ছে প্রতি সেকেন্ডে সি-পি-ইউ "
-"কতগুলো আদেশ সম্পাদন করতে সক্ষম)"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "ফ্ল্যাগ"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "কার্ণেলের দ্বারা রিপোর্টকৃত CPU ফ্ল্যাগ"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv ত্রুটি"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"প্রথম দিককার প্রস্তুতকৃত ইন্টেল পেন্টিয়াম চিপে তাদের দশমিক সংখ্যার প্রসেসরে কিছু ত্রুটি "
-"আছে যেগুলো যথাযথভাবে দশমিক সংখ্যার ভাগ করতে পারত না (FDIV)"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "FPU কি উপস্থিত আছে"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "হ্যা তার মানে প্রসেসরের একটি পাটীগাণিতিক (arithmatic) কো-প্রসেসর আছে"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "যখন FPU এর একটি irq ভেক্টর আছে"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"হ্যা তার মানে পাটীগাণিতিক (arithmatic) কো-প্রসেসরের সাথে ব্যতিক্রমি একটি ভেক্টর "
-"যুক্ত আছে"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "F00f ত্রুটি"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"প্রথম দিককার পেন্টিয়ামগুলো ত্রুটিযুক্ত এবং স্থির হয়ে যায় যখন তা F00F বাইটকোড ডিকোড "
-"করে"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "ত্রুটি থামাও"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"প্রথম দিক্‌কার কিছু i486DX-100 চিপ \"থামো\" আদেশ ব্যবহৃত হওয়ার পর আর স্বাভাবিক "
-"অবস্থায় ফিরতে পারে না"
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "cpu এর সাব-জেনারেশন"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "cpu এর জেনারেশন (যেমন: পেন্টিয়াম ৩ এর জন্য ৮, ...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "মডেলের নাম"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "cpu এর অফিসিয়াল নির্মাতার নাম"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "CPU এর নাম"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "প্রসেসর আইডি"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "প্রসেসর নম্বর"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "মডেল পদক্ষেপ"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "সি-পি-ইউ'র পদক্ষেপ (সাব মডেল (জেনারেশন) নম্বর)"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "প্রসেসর নির্মাতার নাম"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "লেখা প্রতিরোধ"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"সিপিইউ'র CR0 রেজিস্টারে থাকা WP ফ্ল্যাগ জোর করে মেমরি পেজ লেভেলে কোন কিছু লেখা "
-"প্রতিরোধ করে, এটা প্রসেসরকে পরীক্ষা না করা কার্নেলকে ব্যবহারকারীর মেমরিতে প্রবেশ "
-"প্রতিরোধ করে (aka এটা একটি ত্রুটি বিরুদ্ধ পাহারাদার)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "ফ্লপি ফরম্যাট"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "ড্রাইভ সমর্থিত ফ্লপির ফরম্যাট"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI চ্যানেল"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr "ডিস্ক চিহ্নিতকারক"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr "ডিস্কের স্বাভাবিক ধারাবাহিক সংখ্যা"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr "লজিকাল ইউনিট সংখ্যা"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-"SCSI লক্ষ্য সংখ্যা (LUN)। SCSI যন্ত্রগুলো একটি হোস্টের সংগে যুক্ত যেগুলো এটি একটি "
-"চ্যানেল সংখ্যা, একটি লক্ষ্যমাত্রার আইডি \n"
-"এবং একটি লজিকাল ইউনিট সংখ্যা কর্তৃক অদ্বিতীয়ভাবে চিহ্নিত"
-
-# সাম
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "ইনস্টলপরবর্তী আকার"
-
-# সাম
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr "মেমরী ব্যংকটির ইনস্টকৃত আকার"
-
-# সাম
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr "সক্রিয়কৃত আকার"
-
-# সাম
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr "মেমরী ব্যংকের সক্রিয়কৃত আকার"
-
-# সাম
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "মেমরী ডিভাইসের ধরন"
-
-# সাম
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "গতি"
-
-# সাম
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr "মেমরী ব্যংকের গতি"
-
-# সাম
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr "ব্যাংক সংযোগসমূহ"
-
-# সাম: নাম, উপাধি, ধরন?
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr "মেমরী ব্যংকটির সকেটের নাম"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "ডিভাইস ফাইল"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr "মাউসের জন্য কার্ণেল ড্রাইভারের সাথে যোগাযোগে ব্যবহৃত ডিভাইস ফাইল"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr "সমকক্ষ চাকা"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "চাকা সমকক্ষ হবে কিংবা হবে না"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "মাউসের ধরণ"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "মাউসের নাম"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "বাটনের নম্বর"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "মাউসের বাটন সংখ্যা"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "মাউসটি যে বাসে সংযুক্ত তার ধরণ"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr "X11 কর্তৃক ব্যবহৃত মাউস প্রোটোকল"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr "মাউসের সাথে গ্রাফিকাল ডেস্কটপ ব্যবহারের প্রোটোকল"
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "শনাক্তকারন"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "সংযোগ"
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr "সম্পাদন কার্য"
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "প্রোগ্রাম ত্রুটিসমূহ"
-
-# ##বাগ সমূহ
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr "এফপিউ"
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "পার্টিশনসমূহ"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "বৈশিষ্ট্যসমূহ"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/অপশন (_ও)"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/সাহায্য _য"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/স্বয়ংক্রিয় ছাপাযন্ত্র"
-
-# ##msgstr "/স্বয়ংক্রিয় প্রিন্টার"
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/স্বয়ংক্রিয় মডেম (_ম)"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/স্বয়ংক্রিয় জায (jaz) ড্রাইভ (_J)"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-# সাম:
-# not sure about /_Upload 
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr "/হার্ডওয়্যার তালিকা _আপলোড করো"
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/পরিত্যাগ (_প)"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/ফিল্ডের বর্ণনা (_ফ)"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "হার্ডড্রেকের সাহায্য"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"কখনো যদি কোন যন্ত্র চিহ্নিত করে থাকেন, তাহলে আপনি ডান ফ্রেমে\"তথ্য\" যন্ত্র সম্পর্কিত "
-"তচথ্য দেখতে সমর্থ হবেন"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_বাগ রিপোর্ট করো"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_সম্বন্ধে..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "হার্ডড্রেক সম্পর্কে"
-
-# সাম
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"এটা হচ্ছে HardDrake, %s এর একটি হার্ডওয়্যার কনফিগারেশন টুল।\n"
-"<span foreground=\"royalblue3\">সংস্করণ:</span> %s\n"
-"<span foreground=\"royalblue3\">লেখক:</span> থিয়েরি ভিগ্‌নদ &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "হার্ডড্রেক২"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "সনাক্তকৃত হার্ডওয়্যার"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "মডিউল কনফিগার করো"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "কনফিগ টুল চালাও"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "অজানা"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "অজানা"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "আনুসাঙ্গিক"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"বামপাশের ট্রীতে কোন একটি যন্ত্রের উপর ক্লিক করুন এখানে তার সম্পর্কে তথ্য দেখার জন্য।"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "মাধ্যমিক"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "প্রাইমারী"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "বার্ণার"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr "হার্ডওয়্যার তালিকা আপলোড করো"
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "অ্যাকাউন্ট:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "পাসওয়ার্ড:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "হোস্টের নাম:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "অনুগ্রহ করে আপনার কী-বোর্ড লেআউট পছন্দ করুন।"
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "আপনি কি কনসোলে ব্যাকস্পেসকে ডিলিট হিসাবে কাজ করাতে চান?"
-
-# সাম
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"পরিবর্তন সাধিত হয়েছে, কিন্তু কার্যকরী হবার জন্য আপনাকে অবশ্যই রি-ষ্টার্ট করতে হবে"
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Mandriva Linux টুলসমুহের লগ"
-
-# ##যন্ত্রপাতি
-# Logdrake-এর কোন বাংলা হবে বলে আমার মনে হয়না।
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "শুধুমাত্র নির্বাচিত দিনসমূহে দেখাবে"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/File/_নতুন"
-
-# X11 keysyms must be used here;
-# bengali letter "ন" is 0x10009a8
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>0x10009a8"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/File/_খোলো"
-
-# X11 keysyms must be used here;
-# bengali letter "ও" is 0x1000993
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>0x1000993"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/ফাইল/সংরক্ষণ (_স)"
-
-# X11 keysyms must be used here;
-# bengali letter "এ" is 0x100098f
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>0x100098f"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/ফাইল/সংরক্ষণের রূপ (_র)"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/ফাইল/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/অপশন/বাছাই"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/সাহায্য/_সম্বন্ধে..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "বিশুদ্ধতা"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "ব্যবহারকারী"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "বার্তাসমূহ"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Syslog"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "খোঁজ"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "আপনার লগ পর্যবেক্ষন করার একটি টুল"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "সেটিং"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "মিলানো"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "কিন্তু মিলছে না"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "ফাইল পছন্দ করো"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "কেলেন্ডার"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "ফাইলের সূচী"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "মেইল সংকেত"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "সংকেত সাহায্যকারীটি অনাকাঙ্খিতভাবে বিফল হয়েছে:"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "অনুগ্রহ করে অপেক্ষা করুন, ফাইলের শব্দ বিশ্লেষণ হচ্ছে: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "এ্যপাচী ওয়াল্ড ওয়াইড ওয়েব সার্ভার"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "ডোমেইনের নাম সমাধান (Resolve)...."
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "Ftp সার্ভার"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix মেইল সার্ভার"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Samba সার্ভার"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Webmin সার্ভিস"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd সার্ভিস"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "মেইলের সংকেত সিস্টেমটি কনফিগার করো"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "মেইলের সংকেত সিস্টেমটি বন্ধ করো"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "মেইলের সংকেত কনফিগারেশন"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"মেইল কনফিগারেশন ইউটিলিটিতে আপনাকে স্বাগতম।\n"
-"\n"
-"এখানে আপনি আপানার সংকেতের সিস্টেম সেট করতে পারবেন।\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "আপনি কি করতে চান?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "সার্ভিসের সেটিংসমূহ"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "নির্বাচিত সার্ভিসটি আর না চললে আপনি একটি সংকেত পাবেন"
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "সেটিং লোড করো"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "এই মানের চাইতের বেশী লোড হলে আপনি একটি সংকেত পাবেন"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "লোড"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "সংকেত কনফিগারেশন"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "নীচে আপনার ইমেইল ঠিকানা প্রবেশ করুন"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-"এবং আপনি যেই SMTP সার্ভারটি ব্যবহার করতে চান তার নাম (অথবা IP ঠিকানা) প্রবেশ করুন"
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "এই সাহায্যকারীটি সঠিকভাবে মেইল এলার্ট কনফিগার করেছে।"
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "এই সাহায্যকারীটি সঠিকভাবে মেইল এলার্ট নিষ্কৃয় করেছে।"
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "...এর মত সেভ করো"
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "অনুগ্রহ করে আপনার মাউসের ধরণ পছন্দ করুন।"
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "তৃতীয় বাটনকে অনুকরণ করব?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "মাউস পরীক্ষা"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "আপনার মাউস পরীক্ষা করুন:"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "নেটওয়ার্ট %s ইন্টারফেস এ চালু আছে"
-
-# সাম
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "%s ইন্টারফেসে নেটওয়ার্ক নিষ্ক্রিয়। \"নেটওয়ার্ক কনফিগার\" ক্লিক করুন"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "%s সংযুক্ত করো"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "%s বিচ্ছিন্ন করো"
-
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr "নেটওয়ার্ক মনিটর"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "নেটওয়ার্ক কনফিগার"
-
-#: standalone/net_applet:73
-#, c-format
-msgid "Watched interface"
-msgstr "যে সব ইন্টারফেসের উপর নজর রাখা হয়েছে"
-
-# সাম
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "প্রোফাইলসমূহ"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "অনলাইন সহায়তা নিন"
-
-# sam: "Interactive intrusion" was translated as পারস্পরিক সংযোগশীল
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr "পারস্পরিক সংযোগশীল অনধিকার প্রবেশ সনাক্তকরণ "
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "সবসময় স্টার্টআপে আরম্ভ করো"
-
-# সাম
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr "%s দ্বারা একটি পোর্ট স্ক্যানিং আক্রমনের চেষ্টা করা হয়েছে।"
-
-# সাম
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "%s দ্বারা %s সার্ভিসটি আক্রান্ত হয়েছে।"
-
-# সাম
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr "%s দ্বারা একটি পাসওয়ার্ড ভাঙার আক্রমনের চেষ্টা করা হয়েছে।"
-
-# সাম: not sure
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "সক্রিয় ফায়ারওয়াল: অনধিকার প্রবেশ সনাক্ত হয়েছে!"
-
-# সাম
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "আপনি কি আক্রমনকারীকে কালো তালিকাভুক্ত করতে চান?"
-
-# সাম
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr "সবসময় কালো তালিকাভুক্ত করো (আর কখনো প্রশ্ন করবে না)"
-
-# সাম
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr "আক্রমনের বিস্তারিত"
-
-# সাম
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr "আক্রমনের সময়: %s"
-
-# সাম
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "নেটওয়ার্ক ইন্টারফেস: %s"
-
-# সাম
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr "আক্রমনের ধরণ: %s"
-
-# সাম
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "প্রোটোকল: %s"
-
-# সাম
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr "আক্রমনকারীর IP অ্যাড্রেস: %s"
-
-# সাম
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr "আক্রমনকারীর হোস্টনেম: %s"
-
-# সাম
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr "আক্রান্ত সার্ভিস: %s"
-
-# sam
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr "আক্রান্ত পোর্ট: %s"
-
-# সাম
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr "ICMP আক্রমনের ধরণ: %s"
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "নেটওয়ার্ক পর্যবেক্ষণ"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "বিশ্বব্যাপী পরিসংখ্যান"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "ক্ষণস্থায়ী"
-
-# ##ক্ষণিক
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "মোটামুটি"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"প্রদানের\n"
-"গতি"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"আদানের\n"
-"গতি"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"সংযোগ\n"
-"সময়:"
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr "গ্রহণ এবং পরিবহনের জন্য একই স্কেল ব্যবহার করুন"
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "অনুগ্রহ করে অপেক্ষা করুন, আপনার সংযোগ পরীক্ষা করা হচ্ছে..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "ইন্টারনেট থেকে বিচ্ছন্ন করা হচ্ছে"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "ইন্টারনেটে সংযোগ"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "ইন্টরনেট থেকে বিচ্ছন্ন করা যায়নি।"
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "ইন্টারনেট থেকে বিচ্ছিন্ন করা হয়েছে।"
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "সংযোগ সম্পন্ন হয়েছে।"
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"কানেকশন হয়নি।\n"
-"ম্যান্ড্রিব -লিনাক্স কন্ট্রোল প্যানেলে আপনার কনফিগারেশন যাচাই করুন।"
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "কালার কনফিগারেশন"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "প্রেরণ করা হয়েছে:"
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "গ্রহণ করা হয়েছে:"
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "মোটামুটি"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "স্থানীয় পরিমাপ"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"ঘোষনা, আরেকটি ইন্টারনেট সংযোগ সনাক্ত হয়েছে, হয়তোবা আপনার নেটওয়ার্ক ব্যবহার করছে"
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "ইন্টরনেট সংযোগ কনফিগার করা নেই"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "ইনস্টলকৃত প্রিন্টারসমূহের ডাটা পড়া হচ্ছে..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "%s প্রিন্টার মে"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/কাজ (_জ)"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/ প্রিন্টার যোগ করো (_য)"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/সাধারণ হিসেবে সংরক্ষণ করো (_স)"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/এডিট (_এ)"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/মুছো (_ম)"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/দক্ষ মুড (_দ)"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/রিফ্রেশ (_র)"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/CUPS কনফিগার (_ক)"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "খোঁজ:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "ফিল্টার প্রয়োগ করো"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "বিবরণ"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "প্রিন্টারের নাম"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "কানেকশনের ধরন"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "সার্ভারের নাম"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "প্রিন্টার যোগ করো"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "সিস্টেমে একটি নতুন প্রিন্টার যোগ করো"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "সাধারণ হিসেবে সংরক্ষণ করো"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "নির্বাচিত প্রিন্টারটিকে স্বাভাবিক প্রিন্টার হিসেবে সেট করো"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "নির্বাচিত প্রিন্টার এডিট করো"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "নির্বাচিত প্রিন্টার মুছে ফেলো"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "লিষ্টটি রিফ্রেশ করো"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "CPUS কনফিগার করো"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "CPUS প্রিন্টিং সিস্টেম কনফিগার করো"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "সক্রিয়"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "নিষ্ক্রিয়"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "লেখকসমূহ:"
-
-# sam: printer?
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "%s প্রিন্টার ব্যবস্থাপনা"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"স্কেনার ব্যবহার করার জন্য SANE প্যাকেজগুলি ইনস্টল করতে হবে।\n"
-"\n"
-"আপনি কি SANE প্যাকেজ ইনস্টল করতে চান?"
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Scannerdrake থেকে বের হচ্ছি।"
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-"Scannerdrake-এর মাধ্যমে একটি স্কেনারকে সেটআপ করার জন্য যেসব প্যাকেজ প্রয়োজন তা "
-"ইনস্টল করা যায়নি।"
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Scannerdrake এখন চালু হবেনা।"
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "কনফিগার করা স্কেনারগুলি খোঁজা হচ্ছে ..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "নতুন স্কেনারের জন্য খোঁজ চলছে ..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "ফনফিগার করা স্কেনারগুলির লিষ্ট পুনরায় তৈরী করা হচ্ছে ..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "%s-টি এই ভার্সনের %s-এ সাপোর্ট করেনা।"
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s-কে %s-এ পাওয়া গ্যাছে, সয়ংক্রিয়ভাবে কনফিগার করবো?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s স্কেনার ডাটাবেইজে নেই, মেনুয়ালি কনফিগার করবেন?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "স্কেনারের মডেল সিলেক্স করুন"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "সনাক্তকৃত মডেল: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "পোর্ট: %s"
-
-# সাম
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr " (সাপোর্ট করা হয় না)"
-
-# সাম
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "%s টি লিনাক্স সাপোর্ট করেনা।"
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "ফার্মওয়্যার ফাইল ইনস্টল করবেনা"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr "হয়তো আপনার %s-এর ফার্মওয়্যার প্রতিবার চালু করার সময় আপলোড করতে হবে।"
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "তাই যদি হয়, আপনি এটাকে সয়ংক্রিয়ভাবে করাতে পারেন।"
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"আপনাকে আপনার স্কেনারের জন্য ফার্মওয়্যার ফাইলটি সরবরাহ করতে হবে যাতেকরে এটাকে "
-"ইনস্টল করা যায়।"
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"এই ফাইলটি আপনি স্কেনারের সাথে আসা সিডি অথবে ফ্লপি, অথবা পস্তুতকারাকের ওয়েব সাইট "
-"থেকে, অথবা আপনার উইন্ডোজ পার্টিশন থেকে পেতে পারেন।"
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "এখান থেকে ফার্মওয়্যার ফাইল ইনস্টল করো"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "ফার্মওয়্যার ফাইল সিলেক্ট করুন"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "%s ফার্মওয়্যার ফাইলটি উপস্থিত নেই অথবা পড়া যাচ্ছেনা!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr "হয়তো আপনার স্কেনারগুলির ফার্মওয়্যার প্রতিবার চালু করার সময় আপলোড করতে হবে।"
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-"আপনাকে আপনার স্কেনারের জন্য ফার্মওয়্যার ফাইলটগুলি সরবরাহ করতে হবে যাতেকরে এটাকে "
-"ইনস্টল করা যায়।"
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-"যদি আপনি এর মধ্যে আপনার স্কেনারের ফার্মওয়্যার ইনস্টল করে থাকেন তাহলে আপনি নতুন "
-"একটি ফার্মওয়্যার ফাইল সরবরাহ করে তা আপডেট করতে পারেন।"
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "-এর জন্য ফার্মওয়্যার ইনস্টল করো"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "%s-এর জন্য একটি ফার্মওয়্যার ফাইল নির্বাচন করুন"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "%s-এর ফার্মওয়্যার ফাইলটি ইনস্টল করা সম্ভব হলোনা!"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "%s-এর ফার্মওয়্যার ফাইলটি সুষ্ঠভাবে ইনস্টল হয়েছে।"
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "%s সাপোর্ট করেনা"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"Printerdrake-এর মাধ্যমে অবশ্যই %s কনফিগার করতে হবে।\n"
-"আপনি %s কন্ট্রোল সেন্টারের হার্ডওয়্যার সেকশন থেকে printerdrake চালাতে পারেন।"
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "সয়ংক্রিয়ভাবে বরাদ্দকৃত পোর্টসমূহ সনাক্ত করো"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "আপনি একটি ডিভাইস নির্বাচন করুন যেখানে আপনার %s সংযুক্ত আছে"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(নির্দেশ: প্যারালাল পোর্টগুলি সয়ংক্রিয়ভাবে সনাক্ত হবেনা)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "ডিভাইস পছন্দ করো"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "স্কেনারের খোঁজ করা হচ্ছে..."
-
-# সাম
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "কার্নেল মডিউল সেট আপ করছি..."
-
-# সাম
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "দৃষ্টি আকর্ষণ!"
-
-# সাম
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-"আপনার %s সম্পুর্ন স্বয়ংক্রিয়ভাবে কনফিগার করা যাবে না।\n"
-"\n"
-"নিজ হাতে বিন্যস্ত করা প্রয়োজন। অনুগ্রহ করে /etc/sane.d/%s.conf কনফিগারেশন ফইলটি "
-"সম্পাদন করুন। "
-
-# সাম
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-"ড্রইভারের সহায়িকাতে আরও তথ্য পাওয়া যাবে। পড়ার জন্য \"man sane-%s\" কমান্ডটি "
-"চালান।"
-
-# সাম:
-# documents = কাগজপত্র?
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"এরপর আপনি এপ্লিকেশন মেনুর মাল্টিমিডিয়া/গ্রাফিক্স থেকে \"XSane\" অথবা \"Kooka\" "
-"ব্যবহার করে আপনার কাগজপত্র স্ক্যান করতে পারেন।"
-
-# সাম
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-"আপনার %s কনফিগার করা হয়েছে। কিন্তু এটিকে কাজ করাতে কিছু অংশ নিজ হাতে বিন্যস্ত করা "
-"প্রয়োজন হতে পারে। "
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-"যদি এটি Scannerdrake মূল উইন্ডোতে, কনফিগারকৃত স্ক্যানারের তালিকায় না থাকে বা যদি "
-"ঠিক মত কাজ না করে, "
-
-# সাম
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "/etc/sane.d/%s.conf কনফিগারেশন ফাইলটি সম্পাদন করুন।"
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"আপনার %s কনফিগার করা হয়েছে।\n"
-"আপনি এপ্লিকেশন মেনুর মাল্টিমিডিয়া/গ্রাফিক্স থেকে \"XSane\" অথবা \"Kooka\" ব্যবহার "
-"করে স্কেন করতে পারেন।"
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"এই স্কেনারগুলি\n"
-"\n"
-"%s\n"
-"আপনার সিস্টেমে উপলব্ধ রয়েছে।\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"এই স্কেনারটি\n"
-"\n"
-"%s\n"
-"আপনার সিস্টেমে উপলব্ধ রয়েছে।\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "আপনার সিস্টেমে উপলব্ধ কোন স্কেনার এখানে পাওয়া যায়নি।\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "নতুন স্কেনারসমূহের খোঁজ করো"
-
-# Manually -এর বাংলা মনে নেই ;)
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "মেনুয়ালি একটি স্কেনার যোগ করুন"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Firmware ফাইলসমূহ ইনস্টল/আপগ্রেড করো"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "স্কেনার শেয়ারিং"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "দূরবর্ত সমস্থ মেশিনসমূহ"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "এই মেশিনে"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"এই মেশিনের সাথে সংযুক্ত স্কেনারগুলি দূরবর্তী কোন মেশিন বা দূরবর্তী কোন মেশিনের "
-"মাধ্যমে ব্যবহার করা যাবে, আপনি তা এখানে পছন্দ করতে পারেন।"
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"আপনি এখানে সিদ্ধান্তু নিতে পারেন যে দূরবর্তী কোন কম্পিউটারগুলির স্কেনার এখানে বরাদ্দ "
-"থাকবে।"
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "এই মেশিনের স্কেনারগুলি অন্য কম্পিউটারে বরাদ্দ থাকবে"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "যেই হোস্টগুলিতে স্কেনার শেয়ার হবে:"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "রিমোট কম্পিউটারের স্কেনার ব্যবহার করো"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "এই হোস্টসমূহের স্কেনারগুলি ব্যাবহার করো:"
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "লোকাল স্কেনারের শেয়ারিং"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "এগুলি সেই মেশিন যেগুলিতে লোকাল ভাবে সংযুক্ত স্কেনার(গুলি) বরাদ্দ থাকবে:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "হোস্ট যোগ করো"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "নির্বাচিত হোস্ট এডিট করো"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "নির্বাচিত হোস্ট অপসরণ করো"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "হোস্টের নাম/IP এড্রেস:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "একটি লোকাল হোস্ট পছন্দ করুন যেখানে স্কেনারগুলি বরাদ্দ থাকবে:"
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "আপনাকে অবশ্যই একটি হোস্টের নাম অথবা IP ঠিকানা প্রবেশ করাতে হবে।\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "লিষ্টে এই হোস্ট আগে থেকেই আছে, এটা আবার যোগ করা যাবেনা।\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "দূরবর্তী স্কেনারসমূহের ব্যাবহার"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "এগুলিই সেই সমস্থ মেশিন যেগুলি থেকে স্কেনার ব্যবহার করা যাবে:"
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"স্থানীয় স্ক্যানার(গুলো) শেয়ার করার জন্য saned প্যাকেজটি ইনস্টল করতে হবে।\n"
-"\n"
-"আপনি কি saned প্যাকেজটি ইনস্টল করতে চান?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "আপনার স্কেনার(গুলি) নেটওয়ার্কে বরাদ্দ থাকবে না।"
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "\"%s\" হার্ডওয়্যার শ্রেণীর কিছু ডিভাইস অপসরণ করা হয়েছে:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr "- %s অপসারিত হয়েছে\n"
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "কিছু ডিভাইস সমূহ যুক্ত করা হয়েছে: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- %s যুক্ত করা হয়েছে\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "হার্ডওয়্যারের অনুসন্ধান চলছে"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr "\"%s\" শ্রেনীতে হার্ডওয়্যারের পরিবর্তন (জবাব দিতে %s সেকেন্ড সময় লেগেছে)"
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "আপনি কি সঠিক কনফিগ টুল রান করাতে চান?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "ভাষা"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "লাইসেন্স"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "মাউস কনফিগার করো"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "হার্ড ড্রাইভ সনাক্ত"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "ইনস্টলেশনের শ্রেনী নির্বাচন করো"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "তোমার পছন্দের কি-বোর্ড নির্বাচন করো"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "পার্টিশন করা হচ্ছে"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "পার্টিশনসমূহ ফরম্যাট করো"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "ইনস্টলের জন্য প্যাকেজসমূহ পছন্দ করো"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "সিস্টেম ইনস্টল"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "অ্যাডমিনস্ট্রেটর পাসওয়ার্ড"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "একটি ইউজার যোগ করো"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "নেটওয়ার্কিং কনফিগার"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "বুটলোডার ইনস্টল"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "X কনফিগার"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "সার্ভিসমূহ কনফিগার"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "আপডেটসমূহ ইনস্টল"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "ইনস্টল থেকে বাহির"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "এটা কি সঠিক?"
-
-# সাম
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "কোন ফাইল বেছে নেয়া হয়নি"
-
-# সাম
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "আপনি একটি ফাইল নির্বাচন করেছেন, ডিরেক্টরি নয়"
-
-# সাম
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "আপনি একটি ডিরেক্টরি নির্বাচন করেছেন, ফাইল নয়"
-
-# সাম
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "এই নামে কোন ডিরেক্টরি নেই"
-
-# সাম
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "এই নামে কোন ফাইল নেই"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "ট্রী প্রসারিত করো"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "ট্রী সংকীর্ন করো"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "ফ্ল্যাট এবং গ্রুপের শ্রেণীর মধ্যে পরিবর্তন করো"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s ইনস্টল হয়নি\n"
-"ইনস্টল করার জন্য \"পরবর্তি\" অথবা বাতিল করতে \"বাতিল\" ক্লিক করুন"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "ইনস্টলেশন ব্যর্থ হয়েছে"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "লজিকাল ইভেন্টের সংখ্যা: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "আপনার সিস্টেমের রিসোর্স খুব কম। ম্যান্ড্রিব লিনাক্স ইনস্টল করার সময় আপনি সমস্যার "
-#~ "মুখোমুখি\n"
-#~ "হতে পারেন. যদি সেটা ঘটে, তাহলে আপনাকে এর পরিবর্তে টেক্স ইনস্টল করতে হবে। এর "
-#~ "জন্য,\n"
-#~ "যখন সিডিরম থেকে বুট হবে তখন `F1' চাপুন, তারপর `text' লিখুন।"
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr "উপস্থিত মিররের তালিকার জন্য Mandriva Linux-এ সংযুক্ত করা হচ্ছে..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Mandriva Linux ইনস্টলেশন %s"
-
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "সতর্কীকরণ: এই যন্ত্রটি ইন্টারনেটের সংগে যুক্ত করার জন্য পূর্ববর্তীতে কন্‌ফিগার করা "
-#~ "হয়েছিল।\n"
-#~ "নিচের কোন ক্ষেত্রে পরিবর্তনের জন্য এই কন্‌ফিগারেশন বাতিল হয়ে যাবে।\n"
-#~ "আপনি কি আসলেই এই যন্ত্রটি পুনরায় কন্‌ফিগার করতে চান?"
-
-# সাম
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "       - ইথারবুট ফ্লপি/CD তৈরী করুন:\n"
-#~ "       \tডিস্কবিহীন ক্লায়েন্ট মেশিনগুলোতে বুট সিকোয়েন্স চালু করার জন্য NIC এর ROM "
-#~ "ইমেজ\n"
-#~ "       \tবা বুট ফ্লপি প্রয়োজন। ক্লায়েন্ট মেশিনের NIC এর উপর ভিত্তি করে  "
-#~ "drakTermServ\n"
-#~ "       \tএই ইমেজ গুলো তৈরী করতে সাহায্য করবে।\n"
-#~ "       \t\t\n"
-#~ "       \tএকটি 3Com 3c509 এর জন্য নিজ হাতে বুট ফ্লপি তৈরী করার একটি সাধারন "
-#~ "উদাহরন:\n"
-#~ "       \t\t\n"
-#~ "       \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "       \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "       \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0  "
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "ডাইনামিক আই-পি অ্যাড্রেস পুল:"
-
-#~ msgid "hd"
-#~ msgstr "hd"
-
-#~ msgid "tape"
-#~ msgstr "টেপ"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "WebDAV এর রিমোট সাইট ইতিমধ্যেই sync এ আছে!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "WebDAV স্থানান্তর ব্যর্থ!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr ""
-#~ "ব্যাকআপ কোটা পেরিয়ে গেছে!\n"
-#~ "%d মেগাবাইট ব্যবহৃত বনাম %d মেগাবাইট বরাদ্দ।"
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr "ড্রেকব্যাক-আপ-এর জন্য অনুমোদনকৃত সর্বোচ্চ আকার (মেগাবাইট)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-webdav-এর মাধ্যমে নেটওয়ার্ক।\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "গ্রাফিকাল বুট পদ্ধতি ব্যবহার করো"
-
-#~ msgid "first step creation"
-#~ msgstr "প্রথম ধাপ তৈরি"
-
-#~ msgid "choose image file"
-#~ msgstr "ছবি পছন্দ করুন"
-
-#~ msgid "Browse"
-#~ msgstr "ব্রাউজ"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "bootsplash ছবি কন্‌ফিগার করো"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "প্রোগ্রেস বারের রং"
-
-#~ msgid "Preview"
-#~ msgstr "প্রিভিউ"
-
-#~ msgid "Choose color"
-#~ msgstr "রঙ পছন্দ করুন"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "ডিফল্টভাবে কার্নেল বার্তা স্থির করুন"
-
-#~ msgid "Notice"
-#~ msgstr "নির্দেশ"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "%s এ এই থীমের কোন bootsplash নেই !"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "আপনাকে অবশ্যই প্রথমে একটি ইমেজ ফাইল পছন্দ করতে হবে!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "প্রিভিউ তৈরী করা হচ্ছে ..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "%s BootSplash (%s) প্রিভিউ"
-
-#~ msgid ""
-#~ "The image \"%s\" cannot be load due to the following issue:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-#~ msgstr ""
-#~ "\"%s\" ছবিটি নিম্নলিখিত কারণে লোড করা যাচ্ছে না:\n"
-#~ "\n"
-#~ "<span foreground=\"লাল\">%s</span>"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "কোন ফ্লপি ড্রাইভ উপস্থিত নেই"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "%s ড্রাইভে মডিউল আপডেটের ফ্লপি প্রবেশ করান"
-
-# sam
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "টিফিনাগ (‍‍+ল্যাটিন/আরবী)"
-
-#~ msgid "No network card"
-#~ msgstr "কোন নেটওয়ার্ক কার্ড নেই"
-
-#~ msgid ""
-#~ "The following protocols can be used to configure an ethernet connection. "
-#~ "Please choose the one you want to use"
-#~ msgstr ""
-#~ "ইথারনেট সংযুক্তি কন্‌ফিগার করার জন্য নিম্নলিখিত প্রোটোকল ব্যবহৃত হতে পারে। আপনি "
-#~ "যেটি ব্যবহার করতে চান অনুগ্রহ করে সেটি বেছে নিন"
-
-# সাম
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "পূর্বে ইনস্টলকৃত (%s) ড্রাইভার ব্যবহার করুন"
-
-# সাম
-#~ msgid "Use Wi-Fi Protected Access (WPA)"
-#~ msgstr "Wi-Fi সংরক্ষিত প্রবেশাধিকার (WPA) ব্যবহার করুন "
-
-#~ msgid "You've not selected any font"
-#~ msgstr "আপনি কোন ফন্ট বেছে নেন নি"
-
-#~ msgid "http://www.mandrivalinux.com/en/101errata.php3"
-#~ msgstr "http://www.mandrivalinux.com/en/101errata.php3"
diff --git a/perl-install/share/po/br.po b/perl-install/share/po/br.po
deleted file mode 100644
index 099d62dec..000000000
--- a/perl-install/share/po/br.po
+++ /dev/null
@@ -1,23947 +0,0 @@
-# DrakX e Brezhoneg.
-# Copyright (C) 1999-2003 Mandriva
-# Thierry Vignaud <tvignaud@mandriva.com>, 1999-2005
-# Jañ-Mai Drapier <jan-mai.drapier@mail.dotcom.fr>, 1999-2000
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX 10.2\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-05-19 17:48+0200\n"
-"Last-Translator: Thierry Vignaud <tvignaud@mandriva.com>\n"
-"Language-Team: Brezhoneg <ofisk@wanadoo.fr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Pe seurt alc'hwez USB a vennit furmadiñ ?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "Ne m'eus ket gallet skrivañ en alc'hwez"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Aklask"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "Kenderc'hel hep ur alc'hwez USB"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Adlañsañ"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "Red eo da gaout un alc'hwez USB evit enrollañ ho roadoù"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr ""
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "Kefluniañ an alc'hwez USB"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr ""
-"Emaon o lakaat restroù ar gefluniadur war an alc'hwez USB, gortozit mar "
-"plij ..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Kefluniadur emgefreek"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr ""
-"Gortozit mar plij, o tinoiñ trobarzhelloù ha o kefluniañ trobarzhelloù ..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Fazi"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Degouezhet ez eus ur fazi, hogen n'ouzon ket e verañ naet.\n"
-"Kendalc'hit war ho mar."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Ur fazi a zo bet"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "Dilemel restroù ar c'hefluniadur ar reizhiad"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr ""
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Lazhañ an Lazhañ"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "Ne m'eus ket implij ar CD-ROMoù"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Lennit aketus !"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 ko"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 ko"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 Mo"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 Mo"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 Mo"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 Mo"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 Mo"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 Mo"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 Mo pe vuioc'h"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "servijer X"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Dibabit ur servijer X"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr ""
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "N'eo ket evit staliañ ar pakad Xorg : %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Dibabit ment memor ho kartenn c'hrafek"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Staliadur Xorg"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Pe seurt kefluniadur Xorg ha fellout a ra deoc'h ?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr ""
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Implijit Xinemara"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Kefluniadur hep ken ar gartenn « %s » %s"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s gant 3D"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr ""
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr ""
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Personelañ"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Kuitaat"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Kartenn C'hrafek"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Skramm"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Spister"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Testañ"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Dibarzhoù"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr "Sac'het eo restr kefluniadur Xorg; emaon o tremen anezhañ."
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Derc'hel ar c'hemmoù \n"
-"Ar kefluniadur red a zo \n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Dibabit ur skramm evit ar benn #%d"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Dibabit ur skramm"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Lug ha c'hoari"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Rummel"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Gwerzher"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"An div arventenn dreistpouezus a zo ar feur freskaat a-serzh, da lavaret eo "
-"ar\n"
-"feur ma vez freskaet ar skramm a-bezh, ha pouezusuc'h c'hoazh ar feur "
-"kempredañ\n"
-"a-led, da lavaret eo ar feur ma vez diskwelet linennoù skubañ.\n"
-"\n"
-"HOLLBOUEZHUS eo deoc'h na spisaat ur seurt skramm gant ur feur kempredañ\n"
-"a zo en tu-hont da varregezh ho skramm : gallout a rafe gwastañ ho skramm\n"
-" M'hoc'h eus douetañs, dibabit ur c'hefluniadur fur."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Feur freskaat a-led"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Feur freskaat a-serzh"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 liv (8 bit)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil liv (15 bit)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil liv (16 bit)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milion a livioù (24 bit)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Spisterioù"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "All"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Dibabit ar spister ha donder al livioù"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Kartenn c'hrafek : %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "Mat eo"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Nullañ"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Skoazell"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Amprouiñ ar c'hefluniadur"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Degouezhet ez eus ar fazi :\n"
-"%s\n"
-"Klaskit kemmañ un dibarzh bennak"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Echu eo da %d eilenn"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Ha reizh eo ar c'hefluniadur ?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Reizhadur ar stokellaoueg : %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Seurt logodenn : %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Trobarzhell al logodenn : %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skramm : %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "KempredA-led ar skramm : %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "FreskA-serzh ar skramm : %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Kartenn c'hrafek : %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memor c'hrafek : %s ko\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Donder liv : %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Spister : %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Sturier Xorg : %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X pa loc'her"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Kefluniañ ho urzhiataer evit lañsañ X ent emgefreek pa loc'ho a c'hellañ.\n"
-"Mennout a rit lañsañ X pa adloc'hit ?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Peseurt skinwel oc'h implij ?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr "hini all"
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Gortozit mar plij"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "O staliañ ar c'harger loc'hañ"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr ""
-"Staliadur ar c'harger loc'hañ a zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Rann gentañ ar bladenn (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Rann gentañ ar parzhadur kentañ"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "War bladennig"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Tremen e-biou"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "Staliadur LILO/grub"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Pelec'h e mennit staliañ ar c'harger loc'hañ ?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Kefluniadur giz al loc'hañ"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Dibarzhoù pennañ ar c'harger loc'hañ"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Roit ment ar memor vev e Mo"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Didalvout eo « Strishaat dibarzhoù al linenn urzhiañ » hep tremenger"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "An tremegerioù ne glot ket"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Klaskit adarre mar plij"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "C'harger loc'hañ da implijout"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Trobarzhell loc'hañ"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Gedvezh kent loc'hañ ar skeudenn dre ziouer"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Bevaat ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "Bevaatet APIC ebet"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "Bevaatet APIC lec'hel ebet"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Tremenger"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Tremenger (adarre)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Strishaat dibarzhoù al linenn urzhiañ"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "strishaat"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Skarañ /tmp bep ma loc'her"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Spisait ment ar memor bev diouzh ret (kavet %d Mo)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr ""
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr ""
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr ""
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "RK dre ziouer ?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Skeudenn"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Gwrizienn"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Ouzhpennañ en diwezh"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Mod video"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "Profil rouedad"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Skridennad"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Dre ziouer"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Ment an Initrd"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "N'eo ket video"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Berzet eo ar skridennadoù goullo"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Ret eo deoc'h kaout ur skeudenn kalon"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Ret eo deoc'h kaout ur parzhadur gwrizienn"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "En implij eo ar skridennad-se endeo"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Pe seurt enmont a vennit ouzhpennañ ?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Reizhiadoù all (SunOS ...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Reizhiadoù (MacOS ...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Reizhiadoù (Windows ...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Setu da heul an enmontoù liesseurt.\n"
-"Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr ""
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr ""
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "Aotreañ « su »"
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr ""
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr ""
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr ""
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(ouzhpennet %s endeo)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Re eeun eo an tremeger"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Roit un anv arveriad mar plij"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"An anv arveriad a zle bezañ ennañ lizherennoù munut, sifroù, `-' ha `_' "
-"hepken"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Re hir eo an anv arveriad-se"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "En implij eo an anv arveriad-se endeo"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Ouzhpennañ un arveriad"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Skrivit un arveriad\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Graet"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Aotren an arveriad"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Anv gwirion"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Anv ereañ"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Shell"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Arlun"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Emereañ"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Kefluniañ ho urzhiataer evit lañsañ X ent emgefreek gant un arveriad a "
-"c'hellañ."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Mennout a rit implijout an arc'hwel-mañ ?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Ya"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "N'eo ket"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Dibabit an arveriad dre ziouer :"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Dibabit ar merour prenestrer da seveniñ :"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Dibabit ar yezh da implijout, mar plij."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "Dibab ho yezh"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Gallout a rit dibab yezhoù all hag a vo hegerz goude staliañ"
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Implijit Unicode dre ziouer"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "An holl yezhoù"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Bro / Rannvro"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Dibabit hor bro, mar plij."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Setu eo listenn leun ar broioù holl"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "Broioù all"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Barek"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "Hentenn enkas :"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Hini ebet"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "N'eo ket lodañ"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Aotreiñ an holl dud"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Lañsañ userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Serriñ"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Restr lec'hel"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr ""
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Domani Windows"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr "Active Directory gant SFU"
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr "Active Directory gant Winbind"
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "Restr lec'hel :"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP :"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS :"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Domani Windows :"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr "Active Directory gant SFU :"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Active Directory gant Winbind :"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Dilesadur LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "Servijer LDAP"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "eeun"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr "reizhadur ar surantez (SASL/Kerberos)"
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr ""
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Domani"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Servijer"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "Stlennvon an arveriaded LDAP"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr "Tremenger evit an arveriad"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Enrinegadur"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Dilesadur NIS"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "Domani NIS"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "Servijer NIS"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Dilesadur Domani Windows"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Anv merour ar domani"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr ""
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr "Implij LDAP evit enrollañ UID/SID"
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr "Idmap dre ziouer"
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr "Termeniñ tremenger ar merour (root)"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Hentenn dilesadur"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Tremenger ebet"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Re eeun eo an tremenger-se (%d arouezenn a zo ret d'an nebeutañ)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Dilesadur"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "N'hellañ ket implijout ar skignañ hep domani NIS"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Degemer mat en dibaber reizhiad oberiañ !\n"
-"\n"
-"Dibabit an dibaber reizhiad pe\n"
-"gortozit \n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO gant meuziad c'hrafek"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO gant meuziad skrid"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "re bihan eo /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Ne mennit ket staliañ ar c'harger loc'hañ war ur parzhadur %s\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "Staliañ ar c'harger loc'hañ c'hoazh"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "Ko"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "Mo"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "Go"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "To"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d munutennoù"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 munutenn"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d eilenn"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu mank"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper mank"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Aostria"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Australi"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Beljik"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brazil"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Kanada"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Suis"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Kosta Rika"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Republik Tchek"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Alamagn"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Danmark"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estoni"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Spagn"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finland"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Gall"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Gres"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Hongri"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Iwerzhon"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Israel"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Itali"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Japon"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Izelvroioù"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Norvej"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Zeland Nevez"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Pologn"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rusi"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Sweden"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slovaki"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Tailhland"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Taeihlwan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Sua-Africa"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Amerika"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Nevez"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Divarc'hañ"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Marc'hañ"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Poent marc'hañ"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Skrivit URL ar servijer WebDAV mar plij"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Ezhom en deus an URL da gregiñ gant http:// pe https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Servijer : "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Poent marc'hañ : "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Dibarzhoù : %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Gwarezit ho roadoù da gentañ mar plij"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"M'emaoc'h e soñj implijout aboot, taolit evezh leuskel un egor dieub (2048 "
-"rann\n"
-"a zo a-walc'h) e deroù ar bladenn"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Skoazeller"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Dibabit un obererezh"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Unan barzhadur Microsoft Dos/Windows bras hoc'h eus.\n"
-"Aliañ a ran ouzoc'h adventañ ar parzhadur-se\n"
-"(klikit warni, da c'houde klikit ouzh \"Adventañ\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Klikit ouzh ur parzhadur mar plij"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Munudoù"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "N'eo ket pladenn ebet"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "RR gant ur levr-bourzh"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Disloañ"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Goullo"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Seurt ar reizhiadoù restroù :"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Grit kentoc'h gant « %s »"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Krouiñ"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Seurt"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Dilemel"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Implijit « Divarc'hañ » da gentañ"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Dibabit ur parzhadur all"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Dibabit ur parzhadur"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Kuitaat"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Dizober"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Tremen er mod boas"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Tremen er mod mailh"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Kenderc'hel evelato ?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Kuitaat hep enrollañ"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Kuitaat hep skrivañ an daolenn barzhañ ?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Mennout a rit skrivañ kemmoù /etc/fstab"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Ret eo deoc'h adloc'hañ evit ma talvezo kemmoù an daolenn barzhañ"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Skarañ an holl"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Ac'hubiñ ent emgefreek"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Mui"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Titouroù ar bladenn"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Ac'hubet eo an holl barzhadurioù kentañ renk"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "N'hellan ouzpennañ parzhadur ebet ken"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Evit kaout muioc'h a barzhadurioù, lamit unan evit ma c'hellot krouiñ ur "
-"parzhadur astennet mar plij"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr "N'eus Supermount ebet"
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr "Supermount"
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr "Supermount evit CDROMoù hepken"
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Skrivañ an daolenn barzhañ"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Adaozañ ar daolenn barzhañ"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Taolenn barzhañ saveteerezh"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Adkargañ ar daolenn barzhañ"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Emvarc'hañ ar skoroù lem/laka"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Dibabit ar restr"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"N'eo ket heñvel ment an daolenn barzhañ gwarezet\n"
-"Kenderc'hel memestra ?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "O klask assevel an daolenn barzhañ"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Titouroù gant munudoù"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Adventañ"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Furmadiñ"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Ouzhpennañ da RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Ouzhpennañ da LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Lemel diwar RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Lemel diwar LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Kemmañ RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Implij da saveteiñ"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Krouiñ ur parzhadur nevez"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Rann kregiñ : "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Ment e Mo : "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Seurt ar reizhiad restroù : "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Dibarzh : "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Anv al levrenn poellek "
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Lemel ar restr loopback ?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Goude kemmañ seurt ar parzhadur %s, holl roadoù ar parzhadur-se a vo kollet"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Kemmañ seurt ar parzhadur"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Pe seurt reizhiad restroù a vennit ?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Pelec'h e mennit marc'hañ ar restr saveteiñ %s ?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Pelec'h e mennit marc'hañ an drobarzhell %s ?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"N'hellan ket dizober ar poent marc'hañ dre m'eo implijet ar parzhadur-se\n"
-"evit saveteiñ. Lamit ar saveteiñ da gentañ"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Pelec'h e mennit marc'hañ an %s ?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Oc'h adventañ"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "O jediñ bevennoù ar reizhiad restroù FAT"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "N'hellan ket adventañ ar parzhadur-se"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Mat e vije gwareziñ holl roadoù ar parzhadur-se"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Goude adventañ ar parzhadur %s e vo kollet holl roadoù ar parzhadur-se"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Dibabit ar ment nevez"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Ment nevez e Mo : "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Dibabit da be RAID ouzhpennañ"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "nevez"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Dibabit da be LVM ouzhpennañ"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "Anv LVM ?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "N'heller ket implijout ar parzhadur-mañ evit saveteiñ"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Saveteiñ"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Anv ar restr saveteiñ : "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Roit ur anv restr"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Restr implijet gant ur saveteiñ all endeo, dibabit unan all"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Ar restr a zo endeo. E implijout ?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Dibarzhoù marc'hañ"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "A bep sort"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "trobarzhell"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "live"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "ment diaoz (KiO)"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Bezit war evezh : arvarus eo an obererezh-mañ."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Peseurt eo ar parzhadur ?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Ret e vo deoc'h adloc'hañ a-raok ma talvezo ar c'hemm"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "War-nes bezañ skrivet war bladenn eo taolenn barzhañ an ardivink %s !"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Goude furmadiñ ar parzhadur %s, holl roadoù ar parzhadur-se a vo kollet"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Dilec'hiañ retroù er parzhadur nevez"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Kuzhat ar restroù"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "O tilec'hiañ retroù er parzhadur nevez"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Adskrivañ %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Lemel %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "ar parzhadur %s 'zo %s bremañ"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr "Kemmet eo niverennoù ar parzhadurioù : "
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Trobarzhell : "
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "Anv DevFS : "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr "Anv al levrenn : "
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lizher ar bladenn DOS : %s (diwar varteze hepken)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Seurt : "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Anv : "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "O kregiñ : rann %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Ment : %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s rann"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Kranenn %d da %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Furmadet\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "N'eo ket furmadet\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Marc'het\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Restr(où) saveteiñ :\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Parzhadur loc'het dre ziouer\n"
-"    (evit loc'hañ MS-DOS, ket evit lilo)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Live %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Ment diaoz %d KiO\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Pladennoù RAID %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Anv ar restr saveteiñ : %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Lenn-hepken"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Ment : %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Mentoniezh : %s kranenn, %s penn, %s rann\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Titouroù : "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Pladennoù LVM %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Seurt taolenn barzhañ : %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "war kanol %d Nn %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Alc'hwez enrinegadur ar reizhiad restroù"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Dibab hoc'h alc'hwez enrinegadur ar reizhiad restroù"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Re eeun eo an alc'hwez enrinegadur-se (%d arouezenn a zo ret d'an nebeutañ)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "An alc'hwezoù enrinegadur ne glot ket"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Alc'hwez enrinegadur"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Alc'hwez enrinegadur (adarre)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Algoritm enrinegadur"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Kemmañ seurt"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr ""
-"N'hellan ket ereañ gant an anv arveriad %s (n'eo ket mat an tremenger ?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Peseurt anv"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Unan all"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Anv arveriad"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Klask servijerioù"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Klask servijerioù nevez"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Ar pakad %s a zo war-nes bezañ staliet. Mennout a rit staliañ ?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "O staliañ pakadoù ..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "Lemel pakadoù ..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "O zivarc'hañ ar parzhadur %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "sac'het eo mac'hañ ar barzhadur %s er renkell %s"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "O wiriañ %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fazi en ur zivarc'hañ %s : %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Bevañ ar barzhadur disloañ %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "O furmadiñ ar parzhadur %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "O krouiñ hag o furmadiñ ar restr saveteiñ %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "N'ouzon ket penaos furmadiñ %s er seurt %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "furmadiñ er seurt %s eus %s a zo sac'het"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Mountañ ar reizhiad restroù en el lenn-hepken."
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr ""
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr ""
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr ""
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "N'hellit ket implij JFS evit ar parzhadurioù bihanioc'h evit 16Mo"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "N'hellit ket implij ReiserFS evit ar parzhadurioù bihanioc'h evit 32Mo"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "gant /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "servijer"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"N'hellañ ket lenn ar taolenn barzhañ an drobarzhell %s, re vrein eo "
-"evidon :\n"
-"(\n"
-"Klask a rin kenderc'hel en ur ziverkañ ar parzhadurioù siek (Kollet e vo "
-"HOLL ROADOÙ ar bladenn-se).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(%s eo ar fazi)\n"
-"\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Poentoù marc'hañ a rank kregiñ gant /"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Bez' ez eus ur parzhadur e boent marc'hañ %s endeo\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "Ne mennit ket implij ul levrenn poellek evit ar poent marc'hañ %s"
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Netra d'ober"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Pladennig"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Pladenn"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CDROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "engraverioù CD/DVD"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Bandenn"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Kartenn video"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr "Kartenn DVB"
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "Kartenn skinwel"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Trobarzhelloù liesvedia all"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Kartenn son"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Webkam"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Kewerierioù"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "Kartennoù ISDN"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr "Trobarzhelloù kwelet USB"
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr "Kartennoù radio"
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr "Kartennoù rouedad ATM"
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr "Kartennoù rouedad WAN"
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr "Trobarzhelloù Bluetooth"
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Kartenn rouedad"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "Kartennoù ADSL"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Memor"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "Kartennoù AGP"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Moullerez"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Lanker-c'hoari"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "Kartennoù SATA"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "Kartennoù RAID"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Kartennoù (E)IDE/ATA"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Kartennoù Firewire"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "Kartennoù PCMCIA"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "Kartennoù SCSI"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "Kartennoù USB"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "Porzhioù USB"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "Kartennoù SMBus"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Pontoù ha kontrolleroù ar reizhiad"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Stokellaoueg"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Logodenn"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Eiltreser"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Anavez/All"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "kewerier #"
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Gortozit mar plij, o lakaat ar c'hefluniadur"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "N'eus sturier all ebet"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"N'eus sturier all (OSS pe ALSA) evit ho kartenn gwelet (%s). Implij eo ar "
-"sturier « %s » ganti."
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Kefluniadur gwelet"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Amañ e c'hellit dibab ur sturier all (OSS pe ALSA) evit ho kartenn kwelet (%"
-"s)."
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Bremañ implij a ra ar sturier %s « %s » ho gartenn son (ar sturier a-ziouer "
-"a zo « %s » evit)"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Sturier :"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr ""
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Ho evezh"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "N'eo ket ur mollad dieub"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Mollad anavez"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "N'eus sturier ebet evit ho kartenn gwelet (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Mollad anavez"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Fazi : n'eo ket rollet ar sturier « %s » evit ho kartenn gwelet"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Choazh ur sturier"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Choazh ur sturier dre ziouer"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Dinoiñ dre ardivink"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Anavez|Rummel"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Anavez|CPH05X (bt878) [gwerzherioù niverus]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Anavez|CPH06X (bt878) [gwerzherioù niverus]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Gobari ar gartenn :"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Seurt an tuner :"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "Kefluniadur ar PLL :"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr ""
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr ""
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Plijout a ra din"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Anv arveriad"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "A heul"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Arsav al labour"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Diorren"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Endeo grafikel"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Diuz pakadoù unan hag unan"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Bremanaat"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Gant X"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Gant teuliadur bihan"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Staliadur bihan gwir"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr ""
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Kefluniañ"
-
-#: help.pm:189
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Bremañ e c'hellit diuz pe servijoù a vennit e vije lañset pa loc'her.\n"
-"Pa zeu ho logodenn war un draez, ul lagadenn skoazell a zeuio war wel hag\n"
-"a zisplego pal ar servij-se.\n"
-"\n"
-"Bezit aketuz-kenañ el lankad-mañ ma vennit implijout ho ardivink evel ur\n"
-"servijer : mennout a rit emichañs chom hep loc'hañ kement servij n'ho peus "
-"ket\n"
-"c'hoant."
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "War GMT eo an eurier periantel"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr ""
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Implij an egor dieub"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Impliji parzhadur o vezañ"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Chetan an holl planedenn"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Chetan Windows"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Parzhaduroù diouzoc'h"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Krouiñ ur bladennig staliañ emgefreek"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Adseniñ"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Emgefreek"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Enrollañ diuzadenn an pakadoù"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Diaraog"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Staliañ"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Melestradur an surentez"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Emvarc'hañ ar skoroù lem/laka"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Tremen er mod boas/mailh"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "Spagnoleg"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "gant kendarvanerezh ar rodell"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Hollvedel | Ul logodenn bennak (PS/2 pe USB)"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Dibabit ar porzh a zere mar plij. Da skouer, porzh « COM1 » dindan MS\n"
-"Windows a vez anvet « ttyS0 » gant Linux."
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "dilesadur"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Mod mailh"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Kartenn gwelet"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Takad-eur"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "Kartenn pellwel"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "Kartenn ISDN"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Ketal Kevregañ"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Rouedad"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Proksioù"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Live an surentez"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Moger tan"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "C'harger loc'hañ"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Servijerioù"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "A heul ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Diaraog"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Ret eo deoc'h furmadiñ %s ivez"
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Hag ur vedia all hoc'h eus ?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, fuzzy, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr "Hag un etrefas %s bennak a zo ganeoc'h ?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "Rouedad (http)"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "Rouedad (FTP)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "Enlakaat ar CD1 adarre"
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "N'eo ket trobarzhell ebet !"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "Enlakkat ar CD"
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "N'hellan ket marc'hañ< ar CD-ROM"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "URL ar melezour"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr ""
-"Ne m'eus ket kavout ur roll pakadoù e-barzh ar melezour-mañ.  Kit da wiriañ "
-"al lec'hiadur-mañ zo mad."
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Kemmit ho Cd-Rom !\n"
-"\n"
-"Lakait el lenner ar Cd-Rom warnañ an diketenn « %s » mar plij ha gwaskit Mat "
-"eo da c'houde."
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr "Emaon oc'h eilañ"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fazi en ur lenn ar restr %s"
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Adenvelet e oa ar bladenn/pladennoù-mañ :"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr "%s (a vez graet %s dioutañ diaraok)"
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"C'hoarvezet ez eus ur fazi - n'eus bet kavet trobarzhell reizh ebet a-benn "
-"krouiñ reizhiadoù restroù nevez warni. Gwiriit abeg ar gudenn-mañ en ho "
-"ardivinkaj mar plij "
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr "Dibabit ur vedia, mar plij"
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr "N'eo ket mat ar vedia %s"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Ar restr a zo endeo. Rasklañ anezhañ ?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "N'hellan ket sevel skrammpakeroù a-raok parzhañ"
-
-#: install_any.pm:1768
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Gallout a rit dibab yezhoù all hag a vo hegerz goude staliañ"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Staliadur ar reizhiad"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Kefluniañ ar reizhiad"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Ret eo deoc'h kaout ur parzhadur gwrizienn.\n"
-"Evit se, krouit ur parzhadur (pe glikit ouzh unan a zo c'hoazh).\n"
-"Da c'houde dibabit an ober « Poent marc'hañ » ha lakait anezhañ da `/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"N'hoc'h eus ket a barzhadur disloañ\n"
-"\n"
-"Kenderc'hel evelato ?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Ret eo deoc'h kaout ur parzhadur FAT marc'het war /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr ""
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Impliji parzhadurioù o vezañ"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "N'eus parzhadur da implij ebet"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Implij ar barzhadur Windows evit al loopback"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pe barzhadur a vennit implijout evit lakaat Linux4Win ?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Dibabit ar mentoù"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Ment ar parzhadur gwrizienn e Mo : "
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Ment ar parzhadur disloañ e Mo : "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Pe seurt parzhadur a vennit da adventañ ?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Emaon o jediñ ment ar barzhadur Windows"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, fuzzy, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"HO EVEZH !\n"
-"\n"
-"Ezhomm en deus DrakX adventañ ho parzhadur Windows bremañ. Bezit war "
-"evezh :\n"
-"arvarus eo an obererezh-se. Ma n'hoc'h eus ket graet c'hoazh, gwelloc'h e\n"
-"vije deoc'h seveniñ da gentañ scandisk (ha diouzh ret seveniñ defrag) war "
-"ar\n"
-"parzhadur-se, ha gwareziñ ho roadoù. Pa vezit sur, gwaskit « Mat eo »"
-
-#: install_interactive.pm:178
-#, fuzzy, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Da beseurt rann e mennit dilec'hiañ ?"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "parzhadur %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Oc'h adventañ ar parzhadur Windows"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Adventañ FAT zo sac'het : %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Chetan Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Ar parzhadurioù HOLL o vezañ hag e vo kollet holl roadoù war ar bladenn %s"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Implijit fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Gallout a rit bremañ parzhañ ho pladenn galet %s.\n"
-"Pa 'z eo graet, na zisoñjit ket enrollañ dre implijout `w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "N'hellan ket kavout plas da staliañ"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Parzhañ a zo sac'het : %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "O lañsañ ar rouedad"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "O tizenaouiñ ar rouedad"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Gourc'hemennoù, peurc'hraet eo ar staliadur.\n"
-"Lamit ar bladenn loc'hañ ha gwaskit enkas evit adloc'hañ.\n"
-"\n"
-"\n"
-"Evit titouroù war palastroù hegerz evit stumm-mañ Mandriva Linux,\n"
-"sellit ouzh ar Errata war : \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Titouroù war gefluniañ ho reizhiad a zo hegerz e rannbennad Goude\n"
-"Staliañ Sturier ofisiel an Arveriad Mandriva Linux."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Poent marc'hañ doubl %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "O kregiñ gant al lankad `%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Diuzadenn strollad pakadoù"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ment hollek : %d / %d Mo"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Pakad siek"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Stumm : "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Ment : "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d Ko\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Talvoudegezh : "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "N'hellit ket diuz/andiuz ar pakad-mañ"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "peogwir %s zo manket"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "peogwir %s zo manket"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr ""
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr ""
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"N'hellit ket dibab ar pakad-mañ peogwir n'eus ket a-walc'h a egor evit "
-"staliañ anezhañ"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Ar pakadoù a-heul a zo war-nes bezañ staliet"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Ar pakadoù a-heul a zo war-nes bezañ lamet"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Hemañ a zo ur pakad ret, n'hell ket bezañ andiuzet"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "N'hellit ket andiuz ar pakad-mañ. Staliet eo endo"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Bremanaet e tle bezañ ar pabak-mañ\n"
-"Ha sur oc'h e mennit e ziuzañ ?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "N'hellit ket andiuz ar pakad-mañ. Ret eo dezhañ bezañ bremanaet"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr ""
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "Kargañ/Enrollañ an dibab"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Emaon o bremañaat diuzadenn ar pakadoù"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Staliadur bihan"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Dibabit ar pakadoù a vennit staliañ"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "O staliañ"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "O vrasjediñ"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Munudoù ebet"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Amzer a chom"
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Gortozit mar plij, o prientiñ ar staliadur"
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d pakad"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "O staliañ ar pakad %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Ne blij ket din"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Kemmit ho Cd-Rom !\n"
-"\n"
-"Lakait el lenner ar Cd-Rom warnañ an diketenn « %s » mar plij ha gwaskit Mat "
-"eo da c'houde.\n"
-"Ma n'emañ ket ganeoc'h gwaskit Nullañ evit chom hep staliañ ar Cd-Rom-se."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Ur fazi a zo bet en ur rummañ pakadoù :"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Kenderc'hel evelato ?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Ur fazi a zo bet en ur staliañ ar pakadoù :"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "n'eo ket kefluniet"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Emglev an aotre"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr ""
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Dibabit reizhadur ho stokellaoueg mar plij."
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Setu eo listenn leun ar stokellaoueg da gaout"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Staliañ/Bremanaat"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Hag ur staliadur pe ur bremanadur eo ?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Bremanaat %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Alc'hwez enrinegadur evit %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Porzh al logodenn"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outañ, mar plij."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Kendarvanerezh ar nozelenn"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Kendarvanerezh ar nozelenn 2"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Kendarvanerezh ar nozelenn 3"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "O kefluniañ kartennoù PCMCIA ..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Kefluniañ IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "Parzhadur hegerz ebet"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr ""
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Dibabit at poentoù marc'hañ"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Dibabit ar parzhadur a vennit furmadiñ"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Gwiriañ ar bloc'hoù siek ?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"N'eus ket a-walc'h a zisloañ evit peurstaliañ, kreskit anezhañ mar plij"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Emaon o klask ar pakadoù hegerz hag adsevel ar stlennvon rpm ..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Emaon o klask ar pakadoù hegerz ..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Emaon o kavout pakadoù a zo staliet eo ..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Emaon o kavout pakadoù da vremanaat ..."
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dibabit ur melezour da dapout ar pakadoù diwarnañ"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Ho reizhiad n'eus ket wa-walc'h a egor evit staliañ pe vremanaat (%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Kargañ"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Enrollañ"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "N'eo ket mat ar restr"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr ""
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Seurt ar staliadur"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Gant un teuliadur bihan (kuzuliet !)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Staliadur bihan gwir (n'eus urpmi ebet)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "An holl"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"M'hoc'h eus an holl CDoù er roll a-is, gwaskit Mat eo.\n"
-"Ma n'hoc'h eus hini eus ar CDoù-se, gwaskit Nullañ.\n"
-"Ma fazi deoc'h lod eus ar CDoù, andibabit anezho ha gwaskit Mat eo."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom skridennet \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "O prientiñ ar staliadur"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"O staliañ ar pakad %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "O taremprediñ ar melezour evit kaout roll ar pakadoù hegerz ..."
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ne m'eus ket daremprediñ ar melezour %s"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Mennout a rit klask adarre ?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Pe seurt a vo ho takad-eur ?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr ""
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "Servijer NTP"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Evit diverriñ"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Reizhiad"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Periantel"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Servijer CUPS a-bell"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Moullerez ebet"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Hag ur gartenn gwelet ISA hoc'h eus ?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"N'eus kartenn gwelet kavet ebet. Kargañ « harddrake » goude ar staliadur"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Ketal kevregañ"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Rouedad hag Internet"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "kefluniet"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Diogelroez"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "bevaatet"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "diweredekaet"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Lañsañ"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s war %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "N'eo ket kefluniet X. Ha fellout a ra deoc'h da vat ober an dra-mañ ?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "O prientiñ ar c'harger loc'hañ ..."
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Mennout a rit implijout aboot ?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fazi en ur staliañ aboot,\n"
-"klask rediañ ar staliadur zoken ma tistruj ar parzhadur kentañ ?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Lakait ur bladennig gwerc'h el lenner %s"
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Lakait ur bladennig all evit sturieroù el lenner"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "O krouiñ ur bladennig staliañ emgefreek ..."
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Lankadoù 'zo n'int ket peurc'hraet.\n"
-"\n"
-"Mennout a rit kuitaat da vat bremañ ?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Krouiñ ur bladennig staliañ emgefreek"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> etre elfennoù | <Esaouenn> a ziuz | <F12> skramm a heul "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Dibabit ur restr"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Ouzhpennañ"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Kemmañ"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Dilemel"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Diazez"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Disoc'h"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Ober"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Dibab fall, klaskit adarre\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ho tibab ? (%s dre ziouer)"
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ho tibab ? (0/1, « %s » dre ziouer)"
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Nozel « %s » : %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Mennout a rit klikit ouzh an nozel-se ?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ho tibab ? (« %s » %s dre ziouer) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: interactive/stdio.pm:125
-#, fuzzy, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr "Ho tibab ?"
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Ho evezh, kemmet e oa ur skridennad :\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Adkas"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Tchek (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Alamanek"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Spagnolek"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Finnek"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Gallek"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norvegek"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Polonek"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Rusiek"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Svedek"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "Stokellaoueg RU"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "Stokellaoueg SUA"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albaniek"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Armeniek (kozh)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Armeniek (skriverez)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Armeniek (soniadel)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Arabek"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Azerbaidjanek (latin)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belgianek"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bengalek (reizhadur Inscript)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bengalek (reizhadur Probhat)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bulgariek (soniadel)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bulgarek (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brasilek (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosniek"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Belarusiek"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Suis (reizhadur alaman)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Suis (reizhadur gall)"
-
-#: keyboard.pm:204
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Arabek"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Tchek (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Alaman (stokell marv ebet)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanagariek"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Danek"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Esperanto)"
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Gallek)"
-
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (RU)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Norvegek)"
-
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (Polonek)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (Svedek)"
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Dzongka/Tibetek"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estoniek"
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Faroesek"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Jorjiek (reizhadur \"Rusiek\")"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Jorjiek (reizhadur \"Latin\")"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Gresianek"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Gresianek"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Gujartiek"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Gurmukek"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Kroatek"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Hungarek"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Iwerzhonek"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Israelian"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Israelian (soniadel)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Iraniek"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Islandek"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Italianek"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Inuktitut"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Japonek (106 stokell)"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kanadian"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Stokellaoueg korean"
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Kurdek"
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Kirgizek"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Amerikan Latin"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laosiek"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Lituaniek AZERTY (kozh)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Lituaniek AZERTY (nevez)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Lituaniek QUERTY \"linenn sifroù\""
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituaniek QUERTY \"soniadel\""
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Letonek"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malayalamek"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Makedoniek"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr ""
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongoliek (lizherenneg ar ruseg)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Maltek (RU)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Maltek (SUA)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Hollandek"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Oriyaek"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Polonek (reizhadur qwerty)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Polonek (reizhadur qwerty)"
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Pashtouek"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portugalek"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Kanadian (Kebek)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Romaniek (Yawertz)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Romaniek (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Russianek (soniadel)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Sami (norvegek)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Samiek (svedek/finnek)"
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Sindiek"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Slovek"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slovakek (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slovakek (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Serbiek (lizherenneg ar ruseg)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Siriak"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Siriak (soniadel)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telegu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamoul (reizhadur ISCII)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamoul (reizhadur ar skriverez)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Tailh (Kedmanee)"
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Tailh (TIS-820)"
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Tailh (Pattachote)"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr "Tifinagek (reizhadur marokek) (+latin/arabek)"
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr "Tifinagek (reizhadur soniadel) (+latin/arabek)"
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Tadjik"
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Turkmenek"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Turkek (hengounel doare \"F\")"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Turkek (arnevez doare \"Q\")"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ukrainiek"
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Stokellaoueg urduek"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "Stokellaoueg SUA (etrevroadel)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Ouzbek (lizherenneg ar ruseg)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Yezh ar Viet-Nam QUERTY \"linenn sifroù\""
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Yougoslaviek (latin)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Stokell Alft a-zehoù"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr ""
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Touchenn ar meuziad"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Stokell « Prenestr » a-gleiz"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Stokell « Prenestr » a-zehoù"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Stokell Shift a-gleiz"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Stokell Shift a-zehoù"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Stokell Left a-zehoù"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Stokell Left a-gleiz"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr ""
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andora"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Stadoù-Unanet Arabeg"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigwa ha Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Angilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albani"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Armeni"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Antilh an Izelvroioù"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antartik"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Arc'hantin"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Samoa amerikanek"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbeidjan"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosni hag Herzigovi"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbad"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladaech"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bulgari"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Barein"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benin"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermud"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr ""
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivi"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Butañ"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Enez Bouvet"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Botswana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Belarusi"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Beliz"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Inizi Koko (Keeling)"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Republik centrafricaine"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Aod an Olifant"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Inizi Kook"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Chili"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Kameroun"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Sina"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Kolombi"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Serbi & Montenegro"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Kuba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Penn Verde"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Inizi Nedeleg"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Chipr"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominik"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Republik Dominikan"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Aljeri"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Kehider"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Ejipt"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Sahara occidental"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritre"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Etiopi"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fidji"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr ""
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Mikronesi"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Enez Faroe"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gabon"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Rouantelezh Unanet"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenad"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Jeorji"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Gwiana gallek"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Gwana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Jibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Griñland"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gambi"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Gine"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Gwadeloup"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Guine équatoriale"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr ""
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Gwatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Gwam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Gine-Biso"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Gwiana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Sina (Hong Kong)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr ""
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Kroati"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haiti"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonezi"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Indez"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr ""
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Irak"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Iran"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Bro ar Skorn"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamaik"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Jordani"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenya"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgistan"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Kambodj"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Komoros"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Kore (Norzh)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Kore"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kowaet"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Inizi Kaeman"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakstan"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Liban"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Santez Luci"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Liberia"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Lituani"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Luksembourg"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Latvia"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Libi"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Marok"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monako"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldavi"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Inizi Marshall"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Makedonia"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr ""
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongoli"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr ""
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martinik"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Maouritani"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malt"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Mauris"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Inizi Maldiv"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malawi"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Meksiko"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malezia"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mozambik"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibi"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Kaledoni-nevez"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Nijer"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr ""
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nijeria"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nikwaraga"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepal"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr ""
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Oman"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panama"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Peroù"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Polinezi galleg"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papouazi Gine Nevez"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Filipin"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Sant Per ha Mikelon"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Porto Rico"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palestin"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paragwae"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palo"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Kwatar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Enez ar Reunion"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Roumani"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Arabi Saudiet"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Inizi Salaun"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Sechell"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sondan"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapour"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Sant Lena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Sloveni"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Siera Leoñ"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senegal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somali"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Surinam"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome ha Principe"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "Ar Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Siri"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr ""
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Tchad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr ""
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tadjikistan"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelo"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Timor reter"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunizi"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Inizi Tonga"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Turki"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad ha Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr ""
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzani"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ukren"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Ouganda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr ""
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Ourougwae"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Ouzbekistan"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr ""
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Iniz Gwerc'hez"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr ""
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Inizi Samoe"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Ihlemeñ"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayot"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zambi"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "Gwell e vefe koulz deoc'h staliañ ar pakadoù-mañ : %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Degemer e %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Marc'hañ kelc'hiek %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Lemel al levrenn poellek da gentañ\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Arventennoù"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "EBET"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Kefluniañ ar mollad"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Kavet etrefas %s"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Hag un all hoc'h eus ?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Hag un etrefas %s bennak a zo ganeoc'h ?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Gwelet titouroù periantel"
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr "O staliañ ur sturier evit ar kontroller USB"
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "O staliañ ur sturier evit ar kontroller firewire %s"
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "O staliañ ur sturier evit kontroller ar pladennoù %s"
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "O staliañ ur sturier evit ar kontroller erthernet %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "O staliañ ur sturier evit kartenn %s %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(mollad %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Bremañ e c'hellit pourvezañ e zibarzhoù d'ar mollad %s.\n"
-"Diouzh ar furmad « anv=talvoud anv2=talvoud2... » eo an dibaboù.\n"
-"Da skouer, « io=0x300 irq=7 »"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Dibarzhoù ar mollad :"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pe sturier %s a zlefen amprouiñ ?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"E degouezhoù 'zo, ar sturier %s en deus ezhomm titouroù ouzhpenn evit mont\n"
-"en-dro reizh, daoust ma da en-dro mat hepto peurvuiañ. Ha mennout a rit "
-"spisaat\n"
-"dibaboù ouzphenn evitañ, pe aotren d'ar sturier amprouiñ ho penvek evit\n"
-"an titouroù en deus ezhomm ? A-wechoù, amprouiñ a c'hell sac'hañ un "
-"urzhiataer,\n"
-"hogen ne raio reuz ebet."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Embrouiñ"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Spisait dibarzhoù"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Kargañ ar mollad %s a zo sac'het.\n"
-"Mennout a rit klask adarre gant arventennoù all ?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "ur niverenn"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr ""
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr ""
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Logodenn Sun"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Skouer"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Logodenn rummel PS2 rodellek"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Emgefreek"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Logodenn Kensington Thinking"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 nozelenn"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Logodenn rummel 2 nozelenn"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Logodenn rummel 3 nozelenn gant kendarvanerezh ar rodell"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Rodel"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "a-steud"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Logodenn rummel 3 nozelenn"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan gant kendarvanerezh ar rodell"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech doare CC"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech doare CC gant kendarvanerezh ar rodell"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "Doare MM"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logodenn Logitech (a-steud, seurt C7 kozh)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr ""
-"Logodenn Logitech (a-steud, seurt C7 kozh) gant kendarvanerezh ar rodell"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Logodenn Kensington Thinking gant kendarvanerezh ar rodell"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "Logodenn bus"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 nozelenn"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 nozelenn"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3 nozelenn gant kendarvanerezh ar rodell"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Hollvedel"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Logodenn bennak (PS/2 pe USB)"
-
-#: mouse.pm:89
-#, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Kontroller Microsoft Xbox S"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "hini ebet"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Logodenn ebet"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Tablezenn synaptics"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Testan ak logodenn, mar plij"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Da bevaat al logodenn,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "FIÑV HO RODELL !"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "implijit PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "implijit PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "implijit DHCP"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel Speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr "- kavet"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (gant PPPoA) USB"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (gant DHCP) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Kevreañ da internet"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "Peseurt kevreadenn ADSL :"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Servijer Web"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Servijer anvoù ar domani"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "Servijer SSH"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "Servijer FTP"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Servijer mailh"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "Servijer POP ha LDAP"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Servijer telnet"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "Servijer CUPS"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr ""
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "BitTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Holl (moger tan ebet)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Porzhioù all"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "N'eo ket er roll - aozañ anezhan gant an dorn"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "N'ouzhon ket"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Diwar zorn"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr "Dibabit ar sturier Windows (restr .inf) mar plij"
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr "N'hellan ket staliañ ar sturier ndiswrapper %s !"
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr "N'hellan ket kargañ ar mollad ndiswrapper !"
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr "Ne m'eus ket bet kavout an etrefas ndiswrapper !"
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "Dibab-dorn"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Kartenn ISDN diabarzh"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Kefluniadur-dorn"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "IP emgefreek (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "IP emgefreek (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Komenad evit ar bed-all"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Komenad europat (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Modem Alcatel speedtouch USB"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Modem Sagem USB"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Modem Bewan"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "Modem ECI Hi-Focus"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Kefluniadur-dorn TCP/IP"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr ""
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP war Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP war ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr "DSL a-us CAPI"
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr ""
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr ""
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr ""
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr ""
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Diazezet war ur skrid"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Diazezet war un dermenell"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr "WEP digor"
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr "WEP serr"
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Kefluniadur ar rouedad hag internet"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(kavet war ar porzh %s)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(kavet %s)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(kavet)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "Kevreadenn gant ur rouedad takad lec'hel"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Kevreadenn hep neud"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "Kevreadenn ADSL"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Kevreadenn gant ur fun"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "Kevreadenn ISDN"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Kevreadenn gant ur modem"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Dibabit an kevreadenn da kefluniañ"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Emaomp o vont da gefluniañ ar gevreadenn %s.\n"
-"\n"
-"\n"
-"gwaskit « %s » evit kendelc'her"
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Kefluniañ ar gevreadenn"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr ""
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ kartenn"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memor kartenn (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "IO kartenn"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 kartenn"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 kartenn"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Ho niverenn pellgomz"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Anv ar pourchaser (ex pourchaser.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Niverenn bellgomz ar pourchaser"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "DNS 1 ar pourchaser (da zilenn)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "DNS 2 ar pourchaser (da zilenn)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Mod an sifrennadur"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Tizh ar gevreadenn"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Amzer-hont a ar gevreadenn (eil)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Kont (anv an arveriad)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Tremenger ar den"
-
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr "Fun : Dibarzhoù ar gont"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr "Implij BPALogin (red eo evit Telstra)"
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Dibabit an etrefas rouedad a kefluniañ :"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Trobarzhell ar rouedad"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Modem ISDN diavaez"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Dibabit un drobarzhell !"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Kefluniadur ISDN"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Peseurt kartenn hoc'h eus ?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Kenderc'hel"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Dilaoskel"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Pehini eo ho c'hartenn ISDN ?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Sturier"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Pe seurt komenad a vennit imlijout ?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Komenad"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Dibabit hor pourchaser.\n"
-"Ma n'eo ket e-barzh ar roll, dibabit Unlisted."
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Pourchaser :"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Dibabit ar modem a kefluniañ :"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Dibabit ho pourchaser :"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Sifrennañ : Dibarzhoù ar gont"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Anv ar gevreadenn"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Niverenn bellgomz"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Anv ereañ"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "Sifrennañ : Dibarzhoù IP"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "Kefluniadur IP"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "Chomlec'h IP"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Maskl rannrouedad"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Sifrennañ : Dibarzhoù DNS"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Anv ar domani"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Servijer DNS kentañ (da zilenn)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Eil servijer DNS (da zilenn)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "Lakaat anv ostiz eus an IP"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Treuzell"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "Chomlec'h IP ar dreuzell"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "Kefluniadur ADSL"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Dibabit ho pourchaser ADSL, mar plij :"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Implijit ur bladennig"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Implij ma farzhadur Windows"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Ober a rit ur wech all"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr ""
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr ""
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr ""
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr ""
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr ""
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "Assevel-dorn ur sturier"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr "Implijit ur sturier Windows (gant ndiswrapper)"
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "N'eo ket evit staliañ ar pakad %s !"
-
-#: network/netconnect.pm:1048
-#, fuzzy, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Anv ostiz Zeroconf"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "O kefluniañ an drobarzhell rouedad %s (sturier : %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Skrivit ar c'hefluniadur IP evit ar benveg-mañ mar plij.\n"
-"Pep mellad a zlefe bezañ skrivet evel ur chomlec'h IP e stumm\n"
-"sifroù dekvel pikoù etrezo (da skouer 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Adtapout an anv ostiz eus ar chomlec'h DHCP"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "Anv ostiz DHCP"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Maskl rouedad"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Kefluniadur ar rouedad"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Loc'hañ pa loc'hañ an urzhiataer"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "Metrik"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "Kliant DHCP"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Amzer-hont DHCP (eil)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "Adtapout ar servijerien DNS eus DHCP"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr "Adtapout ar servijerien YP eus DHCP"
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr "Adtapout ar servijerien NTPD eus DHCP"
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Er furmad 1.2.3.4 e tlefe bezañ ar chomlec'h IP"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Er furmad 255.255.224.0 e tlefe bezañ ar maskl rouedad"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr ""
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "implijet eo %s c'hoazh\n"
-
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Dibabit ur sturier ndiswrapper"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr "Implijit ar sturier ndiswrapper %s"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr "Staliañ ur sturier nevez"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr "Dibabit un drobarzhell :"
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr ""
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "Mod labour"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Meret"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Mestr"
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Repeater"
-msgstr "Adaozañ adalek ar restr"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Eil derez"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Emgefreek"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Anv ar rouedad (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "Niv ar rouedad"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "Frekañs labour"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr ""
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr ""
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr "Mod enrinegadur"
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr ""
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Roit ho anv ostiz mar plij.\n"
-"Un anv peurzoareet a zlefe bezañ hini o ostiz,\n"
-"evel « mabenveg.mastal.makomp.com ».\n"
-"Gallout a rit ivez reiñ chomlec'h IP an dreuzell m'hoc'h eus unan."
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Anv ostiz (diret)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Anv an ostiz"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "Servijer DNS 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "Servijer DNS 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "Servijer DNS 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "Domani glask"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Treuzell (ex : %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Trobarzhell an dreuzell"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Er furmad 1.2.3.4 e tlefe bezañ chomlec'h ar servijer DNS"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Er furmad 1.2.3.4 e tlefe bezañ chomlec'h ar dreuzell"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Anv ostiz Zeroconf"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Kevreadenn ouzh an internet"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr ""
-"Echu eo ar gefluniadur, Ha fellout a ra deoc'h da arloañ ar gefluniadur-mañ ?"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Mennout a rit lañsañ ar gevradenn pa loc'hañ ?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Mennout a rit lañsañ ar gevradenn pa loc'hañ ?"
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "Ent emgefreek pa loc'ho"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, fuzzy, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Mennout a rit implijout aboot ?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr ""
-"Red eo da adloc'hañ ar rouedad. Fellout a ra deoc'h adloc'hañ anezhañ ?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Kefluniadur ar rouedad"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Degouezhet ez eus ur fazi en ur adloc'hañ ar rouedad :\n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Fellout a ra deoc'h klask da gevreañ ouzh an Internet bremañ ?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "O klask da lakaat ho gevradenn ..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Kevreet ouzh an Internet eo ho reizhiad bremañ."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr ""
-
-#: network/netconnect.pm:1552
-#, fuzzy, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr "Anv ar gevreadenn"
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Kefluniadur proksioù"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "Proksi HTTP"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "Proksi FTP"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "http://... a zlefe bezañ ar proksi"
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "« http: » pe « ftp: » a zlefe bezañ ar proksi"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Kefluniadur kavet ar moger tan :"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Lakait ur bladennig"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Lakait ur bladennig el lenner %s gant %s er renkell gwrizienn ha neuze "
-"gwaskit « %s »"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Fazi moned ouzh ar bladennig, ne m'eus ket mountañ an drobarzhell %s"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "marc'hañ sac'het : "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ne m'eus ket implij ar parzhadurioù astennet gant ar reizhiad-mañ"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Un toull a zo en ho taolenn barzhañ hogen n'hellan ket e implijout.\n"
-"Fiñval ar parzhadurioù kentañ derez evit ma vo an toull stok ouzh ar "
-"parzhadurioù astennet eo an diskoulm"
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Assevel adalek ar restr %s sac'het %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Restr gwareziñ siek"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fazi en ur skrivañ er restr %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "a rankfec'h kaout"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "a-bouez"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "brav-tre"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "brav"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "marteze"
-
-#: pkgs.pm:481
-#, c-format
-msgid "Downloading file %s..."
-msgstr "Emaon oc'h enkargañ ar restr %s ..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(war %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(war ar reizhiad-mañ)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Kefluniañ reizhiadoù all"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "War ar servijer CUPS « %s »"
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Dre ziouer)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr ""
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Common Unix Printing System (servijer a-bell)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "CUPS a-bell"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Gobari anavez"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Moullerez lec'hel"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Moullerez a-bell"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Moullerez war ar Servijer CUPS a-bell"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Moullerez war ar Servijer lpd a-bell"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Moullerez rouedad (TCP/Socket)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Moullerez war ur servijer SMB/Windows 95/98/NT"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Moullerez war ur servijer NetWare"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Roit URI trobarzhell a voullerez"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr ""
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "erbedet"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Gobari anavez"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "Kefluniet ar reizhiad-mañ"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " ouzh ar porzh kenstur #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", Mouluriez USB #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", Mouluriez USB"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", moullerez HP ouzh ar porzh kenstur"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", Moullerez HP ouzh USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", Moullerez HP"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ""
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ""
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", o voulaañ da %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " ouzh ar servijer LPD « %s », moullerez « %s »"
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", Ostiz TCP/IP « %s », porzh %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " ouzh ar servijer Novell « %s », moullerez « %s »"
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Porzh kenstur #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "Moullerez USB #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "Mouluriez USB"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "Moullerez HP ouzh ar porzh kenstur"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "Moullerez HP ouzh USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "Moullerez HP"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr ""
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr ""
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Moulañ a ra da %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "Servijer LPD « %s », moullerez « %s »"
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "Ostiz TCP/IP « %s », porzh « %s »"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "Servijer SMB/Windows « %s », rannad « %s »"
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Servijer Novell « %s », moullerez « %s »"
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "Implij a ra an urzhiad %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI : %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Moullerez diaoz (sturier ebet)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Rouedad(où) lec'hel"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "C'hetal \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Rouedad %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Ostiz %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Porzh %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "Kefluniañ ar voullerez CUPS"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr ""
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Kefluniadur diouzhoc'h"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Reizhiadoù a-bell ebet"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Servijeroù CUPS ouzhpenn : "
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Mod moulañ ar skrid japanek"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: printer/printerdrake.pm:123
-#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Oberiant"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Dioberiant"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr ""
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Ouzhpennañ un oztiz pe ur rouedad"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Kemmañ an ostiz/serjiver diuzet"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Lemel ar ostiz/serjiver diuzet"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "Chomlec'h IP ar ostiz/serjiver diuzet"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "Chomlec'h IP ar ostiz/serjiver ebet."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Steud a-bell"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Ouzhpennañ ar servijer"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Kemmañ ar serjiver diuzet"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Lemel ar servijer diuzet"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "IP ar servijer zo manket !"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "N'eo ket mat an IP roet.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Porzh"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Bev, IP pe anv ar servijer a-bell :"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Mankout a ra anv ar servijer CUPS pe ar chomlec'h IP."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "O lenn roadoù ar moullerezioù ..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Oc'h adloc'hañ CUPS ..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Dibabit lugerezh ar voullerez"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Penaos eo luget ar voullerez ?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Emaon o wiriekaat ho reizhiad ..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "hag unan voullerez dianav"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "ha %d voullerez dianav"
-
-#: printer/printerdrake.pm:703
-#, fuzzy, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: printer/printerdrake.pm:705
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: printer/printerdrake.pm:706
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-
-#: printer/printerdrake.pm:717
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:731
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Ha mennout a rit amprouiñ moullañ skrid ?"
-
-#: printer/printerdrake.pm:733
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Mennout a rit implijout aboot ?"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "O klask moullerezioù nevez ..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "Moullerez kavet ouzh %s ..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " war "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Choaz gobari ar voullerez"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Peseurt moullerez hoc'h eus ?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "Kefluniañ ar voullerez war %s ..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Kefluniañ ar voullerez « %s » ..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Ouzhpennañ ur voullerez nevez"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr ""
-"Dinoiñ ent emgefreek ar moullerezioù hag a zo kevreet ouzh an ostiz-mañ"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-
-#: printer/printerdrake.pm:1151
-#, c-format
-msgid "No auto-detection"
-msgstr "Ne dinoit dre ardivink ket"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "Ne m'eus ket staliañ ar pakadoù %s !"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Dinoiñ dre ardivink moullerezioù"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "O tinoiñ trobarzhelloù ..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", moullerez rouedad « %s », porzh %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", moullerez « %s » ouzh ar servijer SMB/Windows « %s »"
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "%s kavet"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Moullerez ouzh ar porzh kenstur #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Moullerez rouedad « %s », porzh %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Moullerez « %s » ouzh ar servijer SMB/Windows « %s »"
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Moullerez lec'hel"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Ret eo deoc'h reiñ un trobarzhell pe anv ur restr !"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "N'eo ket moullerez ebet !"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Moullerezioù lec'hel"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Moullerezioù da gaout"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Ar voulerez a-heul a zo kavet dre ardivink."
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Setu eo listenn ar voulerezioù kavet dre ardivink holl"
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1390
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Dibabit ouzh pe voullerez a-steud eo luget ho modem, mar plij."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Dibabit ouzh pe borzh a-steud eo luget ho voullerez, mar plij pe roit an anv "
-"drobarzhell pe an anv restr e-barzh al linenn urzhiañ"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho voullerez, mar plij."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Ret eo deoc'h reiñ un trobarzhell pe ur voullerez !"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "O terriñ"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"A-benn implijout ur servijer moulañ lpd a-bell, ret eo deoc'h pourvezañ anv "
-"ostiz ar servijer moullañ hag anv ar voullerez ouzh ar servijer-mañ."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Anv an ostiz a-bell"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Anv ar voullerez a-bell"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Anv an ostiz a-bell a ra diouer !"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Anv an ostiz a-bell a ra diouer"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Titouroù"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Doare dinoet : %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "O klask war ar rouedad ..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", moullerez « %s » war servijer « %s »"
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Moullerez « %s » war servijer « %s »"
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dibarzhoù moullañ SMB (Windows 9x/NT)"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Evit moullañ war ur voullerez SMB eo ret deoc'h pourvezañ\n"
-"anv an ostiz SMB (Ho evezh ! Disheñvel e c'hell bezañ diouzh\n"
-"e anv ostiz TCP/IP !) ha marteze chomlec'h IP ar servijer moullañ,\n"
-"kement hag anv rannet ar voullerez a glaskit tizhout ha ne vern pe\n"
-"ditour a anv arveriad, tremenger ha strollad labour en implij."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "Ostiz ar servijer SMB"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP ar servijer SMB"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Anv rannet"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Strollad labour"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Kavet dre ardivink"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Dibarzhoù ar voullerez NetWare"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Evit moullañ war ur voullerez NetWare eo ret deoc'h pourvezañ anv ar\n"
-"servijer moullañ NetWare (Ho evezh ! Disheñvel e c'hell bezañ diouzh e\n"
-"anv ostiz TCP/IP !) kement hag anv ar steud moullañ evit ar voullerez\n"
-"a glaskit tizhout ha ne vern pe anv arveriad ha tremenger en implij."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Servijer moullañ"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Anv ar steud moullañ"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", ostiz « %s », porzh %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Ostiz « %s », porzh %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Dibarzhoù ar voullerez TCP/Socket"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Mankout a ra anv ostiz ar voullerez pe an IP !"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Anv pe IP an oztiz ar voullerez"
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "O adtresañ roll URI an trobarzhelloù ..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "URI ar drobarzhell ar voullerez"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr ""
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Linenn urzhiañ"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr ""
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "O staliañ pakad %s ..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Da beseurt moullerez e mennit kefluniañ gant HPLIP ?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "O staliañ pakadoù SANE ..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "O staliañ pakad mtools ..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr "O kefluniañ an drobarzhell ..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "O lenn stlennvon ar moullerezioù ..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Roit anv hag askelenn ar voullerez"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Anv ar voullerez"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Deskrivadur"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Lec'hel"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "O prientiñ ar stlennvon ar moullerezioù ..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Gobari ar voullerez"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Mad eo ar gobari."
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Dibabit ar gobari diwar zorn"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "Staliañ ar restr PPD eus"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "Bladennig"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "Lec'hiadur all"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "Dibabit ar restr PPD"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr ""
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr ""
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "O staliañ ar restr PPD ..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Kefluniadur ar voullerez Win OKI"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Kefluniadur Lexmark inkjet"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Kefluniadur ar voullerez Lexmark X125"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Kefluniadur ar voullerez Samsung ML/QL-85G"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Kefluniadur ar voullerez Canon LBP-460/660"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Kefluniadur dre ziouer ar voullerez"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: printer/printerdrake.pm:3656
-#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Ha mennout a rit amprouiñ moullañ skrid ?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Pajennoù arnod"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "N'eus pajenn arnod ebet"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Moulañ"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Pajenn arnod reoliek"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Pajenn arnod all (Lizher)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Pajenn arnod all (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Pajenn arnod foto"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Ne voullit ket ar bajenn arnod"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "O voullañ pajenn(où) arnod ..."
-
-#: printer/printerdrake.pm:3743
-#, fuzzy, c-format
-msgid "Skipping photo test page."
-msgstr "O voullañ pajenn(où) skrid ..."
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Pajenn(où) arnod a zo bet kaset d'ar voullerez.\n"
-"Ur pennadig e c'hell padout a-raok ma loc'hfe a voullerez.\n"
-"Stad ar moullañ :\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Pajenn(où) arnod a zo bet kaset d'ar moullerez.\n"
-"Ur pennadig e c'hell padout a-raok ma loc'hfe a voullerez.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Ha mont a ra en-dro reizh ?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Moullerez diaoz"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3891
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "O tizenaouiñ ar rouedad"
-
-#: printer/printerdrake.pm:3892
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "O tizenaouiñ ar rouedad"
-
-#: printer/printerdrake.pm:3894
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "O tizenaouiñ ar rouedad"
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Emaon o moulañ gant ar voullerez « %s »"
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Emaon o moulañ gant ar voullerez « %s »"
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Roll dibarzhoù ar voullerez"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "Kefluniañ ar Livioù"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr ""
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Anv nevez ar voullerez"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr ""
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "O kregiñ ar rouedad ..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Kefluniañ ar rouedad bremañ"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "N'eo ket kefluniet ar rouedad"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Kenderc'hel hep kefluniañ ar rouedad"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-# to enhance :-(
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Oc'h adkregiñ ar reizhiad moullañ ..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "uhel"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "ankeniet"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Lañsañ ar reizhiad moullañ pa loc'hañ"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr ""
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Lemel %s ..."
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Ne m'eus ket lemel ar reizhiad moullañ %s !"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "O staliañ %s ..."
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Ne m'eus ket staliañ ar reizhiad moullañ %s !"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "Anv pe IP an oztiz ar servijer a-bell :"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "O lakaat ar voullerez dre ziouer ..."
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Reizhiad moullañ CUPS lec'hel pe servijer CUPS a-bell ? "
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr "Reizhiad moullañ CUPS lec'hel"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Dibabit lost ar voullerez"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pe seurt reizhiad moullañ (lost) a vennit da implij ?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Ne m'eus ket kefluniañ ar voullerez « %s » !"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "O staliañ Foomatik ..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "Ne m'eus ket staliañ ar pakadoù %s, ne m'eus ket lañsañ %s !"
-
-#: printer/printerdrake.pm:4789
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Setu da heul ar steudadoù moullañ.\n"
-"Gallout a rit ouzhpennañ lod pe gemmañ a re a zo."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "Kefluniadur CUPS"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Kemmaañ ar reizhiad moullañ"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Mod boas"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Mod mailh"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Dibarzhoù ar voullerez"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Kemmañ kefluniadur ar voullerez"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Moullerez %s%s\n"
-"Petra a fell dit kemmañ anezhi ?"
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "Marv eo ar voullerez-mañ"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Ober a rit !"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Seurt kevreadenn ar voullerez"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Anv ar voullerez, deskrivadur ha lec'hiadur"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Lakaat ar voullerez-mañ dre ziouer"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "Bevaat ar voullerez"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "Marvaat ar voullerez"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Moullañ ar pajennoù arnod"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Lemel ar voullerez"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Lemel ar voullerez gozh « %s » ..."
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Bev eo ar voullerez « %s » bremañ ..."
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "N'eo ket bev eo ar voullerez « %s » bremañ ..."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ha fellout a ra deoc'h da vat lemel ar voullerez « %s » ?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Emaon o dilemel ar voullerez « %s » ..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Moullerez dre ziouer"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "N'hellan ket ouzhpennañ ur parzhadur da RAID %s _furmadet_"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "N'eus ket a-walc'h a parzhadurioù evit RAID live %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "N'hellan ket krouiñ ar renkell /usr/share/sane/firmware !"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "N'hellan ket krouiñ al liamm /usr/share/sane/%s !"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-"N'hellan ket eilañ ar restr meriant %s e-barzh /usr/share/sane/firmware !"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr ""
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr ""
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr ""
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Bevaat/Marvaat emereañ."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr ""
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Bevaat/Marvaat ereañ a-bell gant root."
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr ""
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Posteloù surantez :"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr ""
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr ""
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr ""
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr ""
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr ""
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Lakaat an umask gwrizienn."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr ""
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr ""
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Lakaat umask an arveriad."
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr ""
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr ""
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr ""
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr ""
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Bevaat ereañ a-bell gant root"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr ""
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "Bevaat ar c'hevreadennoù X Window"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr ""
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr ""
-
-#: security/l10n.pm:24
-#, fuzzy, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Kefluniañ servijoù"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr ""
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr ""
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr ""
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr ""
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr ""
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr ""
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr ""
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr ""
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr ""
-
-#: security/l10n.pm:37
-#, fuzzy, c-format
-msgid "No password aging for"
-msgstr "Tremenger ebet"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Hirder istorig an tremegerioù"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr ""
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "Umask root"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Ment istorig ar shell"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Amzer-hont ar shell"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "Umask an arveriad"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Gwiriekaat ar porzhioù digor"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr ""
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr ""
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr ""
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr ""
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr ""
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr ""
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "Gwiriekaat checksum ar restroù SUID/SGID"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr ""
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr ""
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr ""
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr ""
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr ""
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr ""
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr ""
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr ""
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr ""
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Bezit deuet mat, preizherien !"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Paour"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Uhel"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Uheloc'h"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Ankeniet"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ret eo implijout al live-mañ gant evezh. Ober a ra d'ho reizhiad bezañ\n"
-"aesoc'h da implijout, hogen kizidig-tre : arabat e implj evit un ardivink\n"
-"kevreet ouzh lod all pe ouzh ar genrouedad. N'eus ket a haeziñ dre dremenger."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Gweredekaet eo bremañ an tremenger, hogen dierbedet eo c'hoazh an implij en "
-"ur rouedad"
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Setu al live surentez standard a vez erbedet evit un urzhiataer a vo "
-"implijet evit kevreañ evel kliant ouzh ar Genrouedad."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Gant al live surentez-mañ e teu posupl implijout ar reizhiad-mañ evel ur "
-"servijer.\n"
-"Uhel a-walc'h eo bremañ ar surentez evit implijout ar reizhiad evel ur "
-"servijer\n"
-"o tigemer kevreadennoù a-berzh kliantoù niverus. Notenn : ma vez ur c'hliant "
-"kenrouedad hepken, neuze e vefe moarvat gwelloc'h deoc'h dibab ul live "
-"izeloc'h."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Kemer a reomp arc'hweloù al live diaraok, hogen bremañ eo peurserret ar "
-"reizhiad hag an arc'hweloù surentez a zo en o muiañ."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Dibarzhoù DrakSec diazeg"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Dibabit al live surentez c'hoantet"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Live surentez"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Implijit libsafe evit ar servijerien"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Merour surantez (anv ereañ pe chomlec'h postel)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Lañsañ ar reizhiad kwelek ALSA (Advanced Linux Sound Architecture)"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, ur steuñvaer urzhiadoù mareadek."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"servijout a ra apmd evit evezhiañ stad an daspugner hag he enrollañ dre "
-"syslog.\n"
-"Gallout a ra ivez servijout da lazhañ an ardivink pa vez izel an daspugner."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Seveniñ an urzhiadoù steuñvaet gant an urzhiad at d'ar pred laket pa 'z eo\n"
-"bet sevenet at, ha seveniñ urzhiadoù dre lod pa 'z eo izel a-walc'h ar garg."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Ur goulev standard UNIX eo cron evit seveniñ goulevioù diouzh c'hoant an\n"
-"arveriaded da goulzoù mareadek steuñvaet. vixie cron a ouzhpenn kalzig a "
-"arc'hweloù\n"
-"d'ar cron UNIX diazez, en o zouez surentez ha dibarzhoù kefluniañ gwelloc'h."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM a zegas implij al logodenn d'an arloadoù Linux mod-skrid evel\n"
-"Midnight Commander. Reiñ a ra tu da seveniñ obererezhoù troc'hañ-ha-pegañ,\n"
-"ha skor evit meuziadoù kemperzhel war al letrin."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Ur servijer evit ar Gwiad Bedel eo Apache. Implijet e vez evit servijañ\n"
-"restroù HTML ha CGI."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"An diaoul gourservijer kenrouedad (anvet inetd ordinal) a loc'h ur\n"
-"bochad a servijoù kenrouedad all diouzh an ezhomm. E karg loc'hañ meur a "
-"servijoù\n"
-"eo, en o zouez telnet, ftp, rsh, and rlogin. Dizoberiañ inetd a zizoberia\n"
-"an holl servijoù m'eo eñ atebek warno."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ar pakad-mañ a garg ar stokellaoueg diuzet evel termenet e\n"
-"/etc/sysconfig/keyboard. Dre ar maveg kbdconfig e c'hell bezañ diuzet\n"
-"kement-se. Gwell deoc'h leuskel se gweredekaet war darn vuiañ an ardivinkoù."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"An diaoul moullañ ret evit ma dafez en-ro reizh lpr eo lpd. Dre vras\n"
-"ez eo ur servijer a vera dleadoù moullañ evir ar voullerez(ed)."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-
-#: services.pm:54
-#, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) a zo ur Servijer Anvioù Domani (DNS) a zo implijet evit\n"
-"amdreiñ anvioù ostiz e chomlec'hioù IP."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Evit marc'hañ ha divarc'hañ poentoù marc'hañ an holl Reizhiadoù Restroù\n"
-"Rouedad (NFS), SMB (Lan Manager/Windows) ha NCP (NetWare)."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Oberia/Dizoberia an holl etrefasoù rouedad kefluniet da lañsañ\n"
-"da vare al loc'hañ."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS a zo ur c'homenad brudet evit rannañ restroù dre rouedadoù TCP/IP.\n"
-"Ar servij-mañ a bourvez arc'hweloù ur servijer NFS, a vez kefluniaet dre ar\n"
-"restr /etc/exports."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS a zo ur c'homenad brudet evit rannañ restroù dre rouedadoù\n"
-"TCP/IP. Ar servij-mañ a bourvez un arc'hwel morailhañ restroù NFS."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"Skorañ PCMCIA a zegas an tu da implijonut traoù evel ethernet ha modemoù\n"
-"e urzhiataeroù hezoug. Ne vo ket kroget hep bezañ bet kefluniet, rak-se eo "
-"diarvar\n"
-"e staliañ war ardivinkoù n'o deus ket ezhomm anezhañ."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ar c'hartenner porzhioù a vera kevreadennoù RPC, a zo implijet gant\n"
-"komenadoù evel NFS ha NIS. Ar servijer kartenn-porzhioù a rankfe mont en-"
-"dro\n"
-"war ardivinkoù anezho servijerien komenadoù a implij ar reizhiad  RPC."
-
-#: services.pm:73
-#, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Ur Gwazour Treuzdougen Postel eo Postfix, a zo ar goulev a\n"
-"zilech posteloù etre un ardivink hag un all."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Enroll hag assav poul dizurzh ar reizhiad evit genel niveroù\n"
-"dargouezhek gant gwelloc'h perzhded."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"An diaoul routed a ro an tu da vremanaat ent emgefreek an taolenn henchañ\n"
-"IP dre ar c'homenad RIP. Tra ma vez implijet aliesig RIP war rouedadoù "
-"bihan,\n"
-"ezhomm a zo komenadoù henchañ kemplezhoc'h evit rouedadoù rouestlet."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Ar c'homenad rstat a ro tu da implijerien ur rouedad da zastum\n"
-"muzulioù barregezh diwar ne vern pe ardivink er rouedad-se."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Ar c'homenad rusers a ro tu da implijerien ur rouedad da anavezout piv\n"
-"a zo kevreet ouzh ardivinkoù all a respont."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"Ar c'homenad rwho a bourchas da implijerien a-bell roll an holl arveriaded a "
-"zo\n"
-"kevreet ouzh un ardivink ma da en-dro warnañ an diaoul rwhod (heñvel ouzh "
-"finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Lañsañ ar reizhiad kwelek ouzh hoc'h urzhiataer"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog a zo ur gwazerezh ma enroll drezañ an diaouled niverus o "
-"c'hemennadoù\n"
-"e kerzhlevrioù liesseurt ar reizhiad. Ur mennozh mat eo seveniñ ingal syslog."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
-
-#: services.pm:91
-#, fuzzy, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr ""
-"Enaou ha dizenaou ar servijer Fontoù X da vare al loc'hañ hag al lazhañ."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Dibabit pe servijoù a zlefe bezañ lañset ent emgefreek pa loc'her"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "War voulañ"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Kenrouedad"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Rannañ restroù"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Mererezh a-bell"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Servijer ar stlennvon"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "emaon o seveniñ"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "Plaenaozet"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr ""
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Titouroù"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr ""
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "En ur loc'hañ"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Loc'hañ"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Plaenaozañ"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Petra eo Mandriva Linux ?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Degemer e <b>Mandriva Linux</b> !"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-
-#: share/advertising/02.pl:13
-#, fuzzy, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Servijer strollant</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Degemer er <b>bed dieub</b> !"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>Ar GPL</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr ""
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr ""
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, fuzzy, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Mandriva Linux Control Center"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr ""
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>Ar dibab KDE</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, fuzzy, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "All burevioù c'hrafek"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr ""
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Furchal ar Gwiad</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, fuzzy, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* ergerzhet ar Web gant <b>Mozilla ha gKonqueror</b>"
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr ""
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t- ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr ""
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr "\t* ergerzhet ar Web gant <b>Mozilla</b> ha <b>gKonqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr ""
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr ""
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Endro diorren</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Editors</b>"
-msgstr "Diorren"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-
-#: share/advertising/21.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Languages</b>"
-msgstr "Diorren"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr ""
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr ""
-
-#: share/advertising/22.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Tools</b>"
-msgstr "Diorren"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Servijer strollant</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr ""
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Servijerien</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr ""
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Kreizenn ren Mandriva Linux</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr ""
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, fuzzy, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr ""
-
-#: share/advertising/28.pl:15
-#, fuzzy, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr ""
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Store</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Arsav ar burev"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Arsav an c'hoarioù"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Arsav al liesvedia"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Arsav an internet"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Kliant rouedad"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Kefluniadur"
-
-#: share/compssUsers.pl:55
-#, fuzzy, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Mennout a rit amprouiñ ar c'hefluniadur ?"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Ostilhoù letrin"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Aozerien, shelloù, ostilhoù restr, termenelloù"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr ""
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Teuliadur"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr ""
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "Strollant"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Servijer Kolab"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Moger tan"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Dreuzell an Internet"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "Posteloù/keleier"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Servijer posteloù Postfix, servijer keleier Inn"
-
-#: share/compssUsers.pl:100
-#, fuzzy, c-format
-msgid "Directory Server"
-msgstr "Kavlec'h"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "Servijer FTP"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, fuzzy, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Titouroù war ar rouedad (GNOME)"
-
-#: share/compssUsers.pl:112
-#, fuzzy, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Servijer moullañ"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "Servijer NFS, servijer Samba"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Stlennvon"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "Servijer stlennvon PostgreSQL ha MySQL "
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Mailh"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Servijer mailh Postfix"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servijer stlennvon PostgreSQL pe MySQL "
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Servijer rouedad "
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "Burev KDE"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Burev GNOME"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "All burevioù c'hrafek"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Mavegoù"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "Servijer SSH"
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "Webmin"
-
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Servijer Webmin ar gefluniadur a-bell "
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Kefluniadur ar rouedad"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "Skozelerien Mandriva"
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "Skozelerien evit kefluniañ ar servijer"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[stokellaoueg]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr ""
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"arveriadur : %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"\"\n"
-"\"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, fuzzy, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Ret e vo deoc'h adloc'hañ a-raok ma talvezo ar c'hemm"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Dizereit mar plij ha neuze implijit Ctrl-Alt-WarGil"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr ""
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr ""
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr ""
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Kefluniadur ar servijer termenell"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Bevaat ar servijer"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Marvaat ar servijer"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Loc'hañ ar servijer"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Plaenaozañ ar servijer"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Pladennig/ISO Etherboot"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr ""
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Ouzhpennañ pe dilemel arveriadoù"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr ""
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Skeudennoù"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr ""
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Nullañ ar skoazeller"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr ""
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr ""
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr ""
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Graet !"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, fuzzy, c-format
-msgid "Terminal Server Overview"
-msgstr "Kefluniañ ar proksioù"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Bladennig loc'h"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr ""
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "Skeudenn PXE"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "Doare dre ziouer ar galon"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Kalon diuzet ebet !"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
-
-#: standalone/drakTermServ:778
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Lugerezh ar voullerez"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Dilemel"
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "N'eus skeudenn dibabet ebet !"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Dibabit holl NBIoù"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Ouzhpennañ un arveriad -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Dilemel an arveriad"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "seurt : %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "kefluniadur lec'hel : %s"
-
-#: standalone/drakTermServ:1014
-#, fuzzy, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr "Kefluniadur goude staliañ"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr ""
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr ""
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr ""
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "seurt : pounner"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "seurt : skanñ"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "kefluniadur lec'hel : n'eo ket gwir"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "kefluniadur lec'hel : gwir eo"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- &Aozañ an c'hliant"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Marvaat ar gefluniadur lec'hel"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Dilemel an c'hliant"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "kefluniañ dhcpd ..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "An holl gliantoù e vo oc'h implij %s"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Rannrouedad :"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Maskl rouedad :"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Maskl rannrouedad :"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Chomlec'h skignañ :"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Anv an domani :"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "Anv servijerioù"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Ar skeul IP kentañ :"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "Ar skeul IP diwezhañ :"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Skrivañ ar gefluniadur"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Kefluniadur ar servijer dhcpd"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Lakait ur bladennig el lenner map plij :"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "N'hellan ket tizhout ar bladennig !"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Lenner pladennig hegerz ebet !"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "Ar skeudenn PXE zo %s/%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "Fazi en ur skrivañ %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Ar skeudenn ISO Etherboot a zo %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr ""
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Ezhomm m'eus krouiñ  /etc/dhcpd.conf da gentañ !"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "N'eo ket un arveriad %s ...\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr ""
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr ""
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "%s e oa ouzphenn ouzh ar servijer termenell\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "%s dilemelet ...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "N'eo ket bet kavet %s ...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Kefluniadur kemmet - adloc'hañ clusternfs/dhcpd ?"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Fazi !"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr ""
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Keflunier ar staliadur emgefreek"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "adc'hoari"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "diwar zorn"
-
-#: standalone/drakautoinst:64
-#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Kefluniadur goude staliañ"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "O krouiñ ur bladennig staliañ emgefreek"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr ""
-"Lakait ur bladennig gwerc'h all el lenner %s (evit pladenn ar sturieroù)"
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "O krouiñ ur bladennig staliañ emgefreek (pladenn ar sturieroù)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Gourc'hemennoù !"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Staliañ emgefreek"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Ouzhpennañ un hini"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Lemel an hini diwezhañ"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr ""
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr ""
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr ""
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, fuzzy, c-format
-msgid "Total progress"
-msgstr "Amprouiñ ar porzhioù"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-
-#: standalone/drakbackup:612
-#, fuzzy, c-format
-msgid "Cannot spawn %s."
-msgstr "Fazi en ur zigeriñ %s evit skrivañ : %s"
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "N'eo ket tremenger mad war %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Ne m'eus ket bet kavout %s e-barzh %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr ""
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "N'eus ket ur bladennig er CD-R/DVD-R !"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr ""
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "seizenn ebet e %s !"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Gwareziñ restroù ar reizhiad ..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Restr gwareziñ siek"
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Gwareziñ restroù an arveriaded ..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Gwareziñ restroù all ..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Emaon o wareziñ ar bladenn ..."
-
-#: standalone/drakbackup:1063
-#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Restr gwareziñ siek"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr "Fazi en ur kas ar postel. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Ne m'eus ket krouiñ ar c'hatalog !"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Gwareziñ restroù hor reizhiad. (renkell /etc)"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr ""
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: standalone/drakbackup:1431
-#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Dibabit ar restroù pe ar renkelloù ha klikit ouzh « Mat eo »"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Lemel an hini dibabet"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Arveriadioù"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Implijit ur gevreadenn evit gwareziñ"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr ""
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "Implijit Expect evit SSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Kas bremañ"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr ""
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Anv pe IP an oztiz."
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Enrollañ an tremenger-mañ"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Implijit ur CD-R/DVD-R evit gwareziñ"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Dibabit ment ho drobarzhell CD/DVD"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Dibabit ment ho vedia CD/DVD"
-
-#: standalone/drakbackup:1749
-#, fuzzy, c-format
-msgid "Multisession CD"
-msgstr "Liesvedia"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "Media CDRW"
-
-#
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Chetanñ ho vedia LS (Dalc'h kentañ)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " Chetanñ bremañ "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "Media DVD+RW"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "Media DVD-R"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "Media DVDRAM"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "N'eus trobarzhell CD dibabet ebet !"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Implijit ar seizenn evit gwareziñ"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Anv an drobarzhell da implij evit gwareziñ"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, fuzzy, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Restr gwareziñ siek"
-
-#: standalone/drakbackup:1862
-#, fuzzy, c-format
-msgid "Erase tape before backup"
-msgstr "Restr gwareziñ siek"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Stlepel ar seizenn pa vez echu ar gwareziñ"
-
-#: standalone/drakbackup:1944
-#, fuzzy, c-format
-msgid "Enter the directory to save to:"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: standalone/drakbackup:1948
-#, fuzzy, c-format
-msgid "Directory to save to"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CD-R / DVD-R"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Pladenn / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "d'ar pemdez"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "sizhuniek"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "miziek"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "diouzhoc'h"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Genver"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "C'Hwevrer"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Meurzh"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "Ebrel"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Mae"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Mezheven"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Gouhere"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Eost"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Gwengolo"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Here"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Du"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Kerzu"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Sul"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Lun"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Meurzh"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Merc'her"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Yaou"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Gwener"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Sadorn"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Implij un diaoul"
-
-#: standalone/drakbackup:2100
-#, fuzzy, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Munutenn"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Eur"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Deiz"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Miz"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Deiz ar sizhun"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Dibabit ar vedia evit gwareziñ, mar plij."
-
-#: standalone/drakbackup:2139
-#, fuzzy, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-
-#: standalone/drakbackup:2188
-#, fuzzy, c-format
-msgid "Please choose the compression type"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Implijit ar restroù .backupignore"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "Servijer SMTP evit ar posteloù :"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Petra"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Pelec'h"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Pa"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Dibarzhoù a-gresk"
-
-#: standalone/drakbackup:2282
-#, fuzzy, c-format
-msgid "Backup destination not configured..."
-msgstr "Skramm ket kefluniet"
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Kefluniadur Drakbackup"
-
-#: standalone/drakbackup:2318
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Dibabit ar pakadoù a vennit staliañ, mar plij."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "War ar rouedad"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "War CD-R"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "War Bandenn"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Gwareziñ an averiaded"
-
-#: standalone/drakbackup:2368
-#, fuzzy, c-format
-msgid " (Default is all users)"
-msgstr "Moullerez lec'hel"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Dibabit petra'zo da wareziñ, mar plij"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Kefluniañ ar reizhiad"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Dibabit an arveriad diwar zorn"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Dibabit ar roadoù da gwareziñ, mar plij ..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Restroù ar reizhiad :\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Restroù an arveriad :\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Restroù all :\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr ""
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "LS"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr "war ar trobarzhell : %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr ""
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tChetañ=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Dibarzhoù :\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: standalone/drakbackup:2518
-#, fuzzy, c-format
-msgid "\tBackups use tar only\n"
-msgstr "Restr gwareziñ siek"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\tImplijit ar restroù .backupignore\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tKas ur postel da %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tOc'h implij ar servijer SMTP %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Diaoul, %s dre :\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Pladenn.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t- Bandenn\n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rouedad gant FTP\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rouedad gant SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Rouedad gant rsync.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"N'eus kefluniadur ebet, klikit ouzh « Skoazeller » pe  « Barek » mar plij.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- Assevel restroù ar reizhiad.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - eus an deizad : %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- Assevel restroù an arveriad : \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- Assevel ar restroù all : \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:2731
-#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Dibabit ouzh pe borzh a-steud eo luget ho modem, mar plij."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Siek eo ar restroù gwareziñ"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr ""
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "         Kefluniadur assevel         "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr ""
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: standalone/drakbackup:2992
-#, fuzzy, c-format
-msgid "Please choose the date to restore:"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Assevel eus ar bladenn."
-
-#: standalone/drakbackup:3031
-#, fuzzy, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr ""
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Dibabit ur vedia all da assevel eus"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Media all"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Assevel ar reizhiad"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Assevel an arveriaded"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Assevel ar re all"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "Dibabit an hent da assevel e-barzh (e-lec'h /)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "Hent da assevel e-barzh"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr ""
-
-#: standalone/drakbackup:3215
-#, fuzzy, c-format
-msgid "No matches found..."
-msgstr "N'eo ket Moullerez lec'hel !\n"
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Assevel ar re dibabet"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Assevel ar restroù\n"
-"dibabet"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "N'eo ket bet kavet ar restr gwareziñ ouzh %s."
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Assevel eus un CD"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Assevel eus ur seizenn"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Assevel eus ar rouedad"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Assevel eus ar rouedad gant ar c'homenad : %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Anv an Ostiz"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Hent an ostiz pe mollad"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Red eo reuñ un tremenger"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Red eo reuñ un anv arveriad"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Red eo reuñ un anv ostiz"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Red eo reuñ un hent pe ur mollad"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "Restroù assevelet ..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Fazi en ur assevel ..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "N'eo ket digaset %s ..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Klask ar restroù da assevel"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Assevel an holl zielloù"
-
-#: standalone/drakbackup:3774
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Neuziet"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Assevel eus ar c'hatalog"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Ne m'eus ket kavout dielloù da assevel ...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Gwiriekaat ma vez an hent mat %s"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " hag emañ ar CD e-barzh an unvez"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr "Red eo reuñ"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr ""
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr ""
-
-#: standalone/drakbackup:3825
-#, fuzzy, c-format
-msgid "Directory To Restore From"
-msgstr "Assevel adalek ar bladennxig"
-
-#: standalone/drakbackup:3861
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Adaozañ adalek ar restr"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Sevel an diell"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Nevesaat"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Ar pakadoù a-heul a zo war-nes bezañ staliet :\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Dibabi ar roadoù da assevel mar plij ..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Gwareziñ restroù ar reizhiad"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Gwareziñ an averiaded"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Gwareziñ restroù all"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr ""
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "O kas restroù gant FTP"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "O kas restroù ..."
-
-#: standalone/drakbackup:4268
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Kefluniadur ar rouedad"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Sell ouzh kefluniadur gwareziñ"
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Kefluniadur ar skoazellerien"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Kefluniadur barek"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Sell ouzh gefluniadur"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr ""
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Gwareziñ bremañ"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"N'eus kefluniadur kavet ebet\n"
-"klikit ouzh « Skoazeller » pe  « Barek » mar plij."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Restr"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Restr/_Kuitaat"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "Mennout a rit kefluniañ anezhañ bremañ ?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Staliañ ar gizioù"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Dibabit ar c'hiz loc'hañ ar reizhiad"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Giz"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Diskouez ar c'hiz\n"
-"ouzh al letrin"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Krouiñ gizioù nevez"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Arveriad dre ziouer"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Burev dre ziouer"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Ne fell ket din emereañ gant an dra-se"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ya, plijout a ra din gant emereañ (averiad, burev)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Mod ar reizhiad"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Lañsañ an endro grafikel pa vez loc'het ho reizhiad"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, fuzzy, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Mandriva Linux Control Center"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Kreizenn ren Mandriva Linux"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr ""
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr ""
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Dibarzhoù ar voullerez lpd a-bell"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Merour Poelladoù"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, fuzzy, c-format
-msgid "Windows Migration tool"
-msgstr "Titouroù"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Skoazellerien kefluniadur"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr "Dibabit un ostilh Mandriva :"
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"pe anv ar meziant\n"
-"(pe un hent leun) :"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Klask Pakad"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Pakad :"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Kalon :"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Dezrevell"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "N'eo ket staliet"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "N'eo ket staliet ar pakad"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "n'eo ket lakaet"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Kemmañ ar takad-eur"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Takad-eur - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Ha war GMT eo lakaet ho eurier periantel ?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr ""
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr ""
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Servijer :"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Deraouekaat"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Ezhomm 'peus staliañ ar pabak ntp\n"
-" evit bevaat NTP\n"
-"\n"
-"Ha sur oc'h e staliit ntp ?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Kefluniadur ar rouedad (%d kartenn)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Treuzell : "
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "C'hetal :"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Gortoz mar plij"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "C'hetal"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Rannvro"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Anv an ostiz : "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Kefluniañ anv an ostiz ..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "Kefluniadur ar rouedad takad lec'hel"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Kefluniañ ar rouedad takad lec'hel ..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Lakat"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Meran liammoù"
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr "Trobarzhell dibabet"
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "Kefluniadur IP"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "Servijerioù DNS"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Domani klask"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "statik"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Evezhiañ ar red"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Dibenn al linennoù"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Amzer-hont ar modem"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Implijit ur restr prennañ"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Gortoz e-pad an ton galv goude sifrenn"
-
-#: standalone/drakconnect:547
-#, fuzzy, c-format
-msgid "Busy wait"
-msgstr "Kowaet"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "Son ar modem"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Bevaat"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Marvaat "
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr ""
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Anv ar mollad"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "Chomlec'h MAC"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Bus"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Lec'hel war ar bus"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Lebel un etrefas rouedad"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Dibabit an etrefas rouedad a lemel :"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Degouezhet ez eus ar fazi en ur lemel an etrefas rouedad « %s » :\n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr ""
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "IP ebet"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Mask ebet"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "uhel"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "izel"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Kevreadet"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Kevreadet ebet"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Digevreañ ..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Kevreañ ..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "Digevreañ bremañ"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "Kevreañ bremañ"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "Kefluniadur ar rouedad takad lec'hel"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Kartenn %s : %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr ""
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Loc'het pa vez loc'het an urzhiataer"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Kefluniañ un etrefas rouedad (LAN, ISDN, ADLS, ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Kefluniadur ar gevreadenn internet"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "Servijer DNS trede (da zilenn)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Kefluniadur ar gevreadenn ar c'henrouedad"
-
-#: standalone/drakconnect:1058
-#, fuzzy, c-format
-msgid "Internet access"
-msgstr "dedennus"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Seurt ar gevreadenn : "
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Stad :"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr ""
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Great eo ar c'hemm, C'hoant ho peus e adloc'hañ ar servij dm ?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "krouidigezh ar bladenn lañsañ"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Pennañ"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Trobarzhell"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Doare ar galon"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Dibarzhoù"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Dibarzhoù barek"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Ment"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr ""
-
-#: standalone/drakfloppy:141
-#, fuzzy, c-format
-msgid "force"
-msgstr "Dilec'hiañ"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "raid ebet"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "ma zo red"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "scsi ebet"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Ouzhpennañ ur mollad"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Lemel ur mollad"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr ""
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "N'eo ket fork : %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Echu eo krouidigezh ar bladenn lañsañ"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Klask an nodrezhoù staliet"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Andiuz an nodrezhoù staliet"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr ""
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "Nodrezhoù ebet kavet"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "graet"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "Ne m'eus ket kavout un nodrezh e-barzh ho barzhadurioù marc'het"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Adibabit nodrezhoù mat"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "Ne m'eus ket gallet kavout un nodrezh.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Klask ar nodrezhoù er roll ar re staliet"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr ""
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Adskrivañ nodrezhoù"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Staliadur an nodrezhoù True Type"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "gortozit mar plij en ur ttmkfdir ..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "Graet eo staliadur an nodrezhoù True Type"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr ""
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Lemel ar restroù padennek"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Adloc'hañ XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Lemel restroù ar fontoù"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "adloc'hañ xfs"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Listenn nodrezhoù"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "A-brepoz"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Distaliañ"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Enporzh"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-
-#: standalone/drakfont:555
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Dibabit ar parzhadur a vennit furmadiñ"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Moullerez"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Dibabit restr pe renkell ar nodrezh ha klikit ouzh « Ouzhpennañ »"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Choazh ar restr"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr "Nodrezhoù"
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Enporzh an nodrezhoù"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Staliañ ar nodezhoù"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "klikit amañ ma 'z oc'h sur."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "amañ ma n'oc'h ket sur."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Andiuz an holl re"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Diuz an holl re"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Dilemel al listenn"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "Emaon oc'h enporzh an nodrezhoù"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr ""
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr ""
-
-#: standalone/drakfont:757
-#, fuzzy, c-format
-msgid "Install & convert Fonts"
-msgstr "Staliañ an nodrezhoù"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Pa vez echu ar staliadur"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Lemel an nodrezhoù eus ho reizhiad"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Goude an distaliadur"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, fuzzy, c-format
-msgid "Internet Connection Sharing"
-msgstr "Lugerezh ar voullerez"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr ""
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr ""
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "bevaat"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "adgefluniañ"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr ""
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Emaon o bevaat ar servijerien ..."
-
-#: standalone/drakgw:146
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Lugerezh ar voullerez"
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr ""
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "marvaat"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "O varvaat ar servijerien ..."
-
-#: standalone/drakgw:172
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Lugerezh ar voullerez"
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Etrefas %s (gant ar mollad %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "C'hetal %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr ""
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Etrefas rouedad"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Dibabit an etrefas rouedad"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Kefluniet eo an etrefas rouedad c'hoazh"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Adgefluniadur emgefreek"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr ""
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Diskouez kefluniadur red an etrefas"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Kefluniadur red an etrefas"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Chomlec'h ar rouedad lec'hel"
-
-#: standalone/drakgw:323
-#, fuzzy, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"Kefluniadur ar servijer DHCP.\n"
-"\n"
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP ar servijer DHCP(-se)"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "IP ar servijer DNS"
-
-#: standalone/drakgw:329
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Moullerez lec'hel"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "Ar skeul DHCP kentañ"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "Ar skeul DHCP diwezhañ"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Adgefluniañ an etrefas hag ar servijer DHCP"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "O kefluskañ ..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Fazioù en ur staliañ ar pakad %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr ""
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Kreizenn sikourMandriva Linux"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Dibarzhoù ar reizhiad"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Kefluniadur diouzhoc'h"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Kefluniadur diouzhoc'h ha reizhiad"
-
-#: standalone/drakperm:44
-#, fuzzy, c-format
-msgid "Editable"
-msgstr "Taolenn"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Hent"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Arveriad"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Strollad"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Reizhan"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr "Ouzhpennañ ur reollin nevez"
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Aozañ ar reollen red"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Sevel"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Diskenn"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr ""
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Ouzhpennañ ur reollin"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Ouzhpennañ ur reollin nevez d'ar fin"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Lemel ar reollin dibabet"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Kemmañ"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "ergerzhet"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "arveriad"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "strollad"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "all"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Lenn"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr ""
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Skriv"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr ""
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Seveniñ"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr ""
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr ""
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr ""
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Arveriad :"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Strollad :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Arveriad red"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr ""
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Diuzadenn an hent"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Perzhioù"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Kefluniadur ar Servijer PXE"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Kefluniadur ar servijer staliadur"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Dibabit an etrefas rouedad m'eo implijet ar servijer dhcp outañ, mar plij."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Etrefas %s (war rouedad %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "An IP DHCP kentañ"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "An IP DHCP diwezhañ"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Renkell ar skeudennoù staliadur"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "N'eo ket kavet ar skeudenn"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Lec'hiadur ar restr auto_install.cfg"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr "ESSID"
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Mod"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Kanol"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr "Alc'hwez"
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Rouedad:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Giz :"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Enrinegadur:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Arhent:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "dioberiant"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr "Lakaat"
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Kevreañ"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr "Rouedadoù da gaout"
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr ""
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Stad"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Digevreañ"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Adtresañ"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "oberiant"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "HOLL"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "LEC'HEL"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Tremen e-biou"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"Amañ e c'hellit kefluniañ al live surantez hag melestradur an surentez\n"
-"hoc'h urziataer.\n"
-"\n"
-"\n"
-"Ar « Melestradur an surentez » a vo o resev posteloù surantez ma vez\n"
-"bev an dibarzh « <span weight=\"bold\">Posteloù surantez</span> ». Un\n"
-"anv arveriad pe ur chomlec'h postel e c'hell bezañ.\n"
-"\n"
-"\n"
-"Gant ar meuziad « <span weight=\"bold\">Live surantez</span> », possubl\n"
-"eo dibab unan eus ar c'hwec'h live surantez hag a zo pourvezet. Etre\n"
-"« <span weight=\"bold\">Paour</span> » hag « <span\n"
-"weight=\"bold\">Ankeniet</span> » eo al live surantez. Aes da implij eo\n"
-"« Paour ». Evit ar servijerien eo « Ankeniet ».\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paour</span> : N'eo ket surantezet ar\n"
-"reizhiat met aez da implij eo gant al live-surantez-mañ. Gwell deoc'h\n"
-"implij kement-mañ evit un urzhiatazer hag na vez ket ouzh ur rouedad.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Skouer</span> : Setu al live surentez\n"
-"standard a vez erbedet evit un urzhiataer a vo implijet evit kevreañ\n"
-"evel kliant ouzh ar Genrouedad.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Uhel</span> : Bremañ ez eus gwiriadennoù\n"
-"surentez hag a zo sevenet d'an noz.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Uheloc'h</span> : Uhel a-walc'h eo\n"
-"bremañ ar surentez evit implijout ar reizhiad evel ur servijer o\n"
-"tigemer kevreadennoù a-berzh kliantoù niverus. Ma vez ur c'hliant\n"
-"kenrouedad hepken, neuze e vefe moarvat gwelloc'h deoc'h dibab ul live\n"
-"izeloc'h.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Ankeniet</span> : Kemer a reomp\n"
-"arc'hweloù al live diaraok, hogen bremañ eo peurserret ar reizhiad hag\n"
-"an arc'hweloù surentez a zo en o muiañ."
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(gwerzh dre ziouer : %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Live Surentez :"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Merour surentez :"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Dibarzhoù diazeg"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Dibarzhoù ar rouedad"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Dibarzhoù ar reizhiad"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr ""
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Emaon o lakaat al live surentez, gortoz mar plij ..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Emaon o lakaat an dibarzhoù surentez, gortoz mar plij ..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Kartenn gwelet ebet !"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "Lec'hed ar testenn"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr ""
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr ""
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr ""
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr ""
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Anv ar giz"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "spister diwezhañ"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "Enrollañ ar c'hiz"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "emon oc'h enrollañ ar c'hiz Bootsplash ..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "dibabit ur skeudenn"
-
-#: standalone/draksplash:162
-#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Lugerezh ar voullerez"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "Ouzhpennañ un drobarzhell UPS"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "Dinoiñ dre ardivink"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Emaon o klask"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Brav !"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr ""
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "N'eus trobarzhelloù UPS nevez kavet"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "Kefluniadur ar sturier UPS"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "Dibabit seurt hoc'h UPS, mar plij."
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "Farder / Gobari :"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Anv :"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr ""
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Porzh :"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "Ar porzh a-steud m'eo luget ho ups outañ"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr ""
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "Trobarzhelloù UPS"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Anv"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "Arveriaded UPS"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr ""
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr ""
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Reolennoù"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Gwezhiad"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Live"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "Anv an ACL"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUPS"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Degemer en ostilh ar c'hefluniadur UPS"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "Bev eo ar gevreadenn VPN."
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "O varvaat ar VPN ..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "Marv eo ar gevreadenn VPN bremañ."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "Marv eo ar gevreadenn VPN bremañ."
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "O bevaat ar VPN ..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "Bev eo ar gevreadenn VPN bremañ."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr ""
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Mollad ar galon."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Politikerezhioù ar surentez"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr ""
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Restr ar c'hefluniadur"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s bouetadur"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Diskouez"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, fuzzy, c-format
-msgid "Commit"
-msgstr "fetis"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Kefluniadur an diskwel"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "kefluniadur"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "conn %default"
-msgstr "dre ziouer"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "normal conn"
-msgstr "Boas"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Endeo eo !"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "etrefasoù"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr ""
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr ""
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr ""
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr ""
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr ""
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr ""
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr ""
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr ""
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "a-gleiz"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr ""
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr ""
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr ""
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "anv an dachenn"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr ""
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "emgefreek"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "a-zehoù"
-
-#: standalone/drakvpn:500
-#, fuzzy, c-format
-msgid "rightcert"
-msgstr "Uheloc'h"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr ""
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr ""
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Aozañ an dachenn"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Anvioù an tachennoù"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "N'hellan ket aozañ !"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Lemel an dachenn"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "hent"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "a-bell"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "seurt an hent"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "gwir restr"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "seurt_an_hent"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr ""
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr ""
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr ""
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, fuzzy, c-format
-msgid "Sainfo destination protocol"
-msgstr "Titouroù"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "Strollad PFS"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, fuzzy, c-format
-msgid "Lifetime number"
-msgstr "ur niverenn"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr ""
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, fuzzy, c-format
-msgid "Authentication algorithm"
-msgstr "dilesadur"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1036
-#, fuzzy, c-format
-msgid "deflate"
-msgstr "dre ziouer"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "A-bell"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, fuzzy, c-format
-msgid "Exchange mode"
-msgstr "Anv domani"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "Krouiñ ar politikerez"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, fuzzy, c-format
-msgid "Passive"
-msgstr "Palestin"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "Seurt an testeni"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "Ma restr testeni"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "Anv an testeni"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "Ma alc'hwez sekred"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "Anv an alc'hwez sekred"
-
-#: standalone/drakvpn:1087
-#, fuzzy, c-format
-msgid "Peers certfile"
-msgstr "Dibabit ar restr"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr ""
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "Gwiriekaat an testeni"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "Ma niverenn"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, fuzzy, c-format
-msgid "Peers identifier"
-msgstr "Moullerez"
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr ""
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "Strollad DH"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Urzhiad"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr ""
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr ""
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr ""
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "un dra bennak"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Banniel"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Keñver"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "Politikerez IPsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "ipsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr "lemel"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr "tunnel"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "transport"
-msgstr "Porzhioù all"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Tizh/dehaezadur"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "dre ziouer"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "implij"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "dieil"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "SUA (skignañ)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "SUA (fun)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "SUA (cable-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (fun)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japon (skignañ)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Japon (fun)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "Sina (skignañ)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Europa-Heol"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Europa reter"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Gall [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Zeland nevez"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "Seurt ar skinwel :"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Bro :"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Emaon o klask kanolioù ar skinwell"
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "O klask kanolioù ar skinwell"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Degouezhet ez eus ur fazi en ur klask kanolioù ar skinwell"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr ""
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Kartenn TV ebet !"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Sturierien all"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "roll ar sturierien all evit ar gartenn gwelet-mañ"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Dilesadur"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr ""
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Trobarzhell kozh ar restr"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Trobarzhell devfs nevez"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Mollad"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "Parzhadurioù astennet"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "niver a parzhadurioù astennet"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Mentoniezh"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "Kontroller pladenn"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr "ar gontroller pladenn ouzh an ostiz"
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr ""
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Gobari"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "Gobari ar bladenn"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "porzh ar voullerez rouedad"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "Parzhadurioù kentañ"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "niver a parzhadurioù kentañ"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "anv gwerzher an drobarzhell"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "Bus PCI #"
-
-#: standalone/harddrake2:54
-#, fuzzy, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outañ, mar plij."
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "Trobarzhell PCI #"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "niverenn an drobarzhell PCI"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, fuzzy, c-format
-msgid "PCI function number"
-msgstr "Anv ar gevreadenn"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "ID ar werzher"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "ID an drobarzhell"
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "anv gwerzher an drobarzhell"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "Sub device ID"
-msgstr "trobarzhell"
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "anv gwerzher an drobarzhell"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "ID an drobarzhell USB"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Ment ar grubuilh"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr ""
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr ""
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Live cpuid"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekañs (Mhz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Bannielloù"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr ""
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr ""
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Anv ar gobari"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr ""
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr ""
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr ""
-
-#: standalone/harddrake2:86
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "O furmadiñ"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr ""
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr ""
-
-#: standalone/harddrake2:88
-#, fuzzy, c-format
-msgid "Write protection"
-msgstr "Dilesadur"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Furmad ar bladennig"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr ""
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Kanol EIDE/SCSI"
-
-#: standalone/harddrake2:97
-#, fuzzy, c-format
-msgid "Disk identifier"
-msgstr "Moullerez"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, fuzzy, c-format
-msgid "Logical unit number"
-msgstr "Anv al levrenn poellek "
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "Ment staliet"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr "Ment bev"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "seurt an drobarzhell vemor"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Tizh"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, fuzzy, c-format
-msgid "Bank connections"
-msgstr "Meran liammoù"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "Restr ar drobarzhell"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, fuzzy, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "seurt al logodenn"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "anv al logodenn"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Niver a nozelioù"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "niver a nozelioù gand al logodenn"
-
-#: standalone/harddrake2:119
-#, fuzzy, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "Dibabit ar porzh a-steud m'eo luget ho logodenn outañ, mar plij."
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Dilesadur"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Kevreadenn"
-
-#: standalone/harddrake2:137
-#, fuzzy, c-format
-msgid "Performances"
-msgstr "Dibarzhoù"
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "Bugoù"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Parzhadurioù"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Arc'hweloù"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Dibarzhoù"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Skoazell"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Kavout _moullerezioù"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Kavout m_odemioù"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Kavout an drobarzhelloù _jaz "
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr "/_Ezkargañ roll ar perientel"
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Kuitaat"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/Deskrivadur an _tachennoù"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Skoazell Harddrake"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Reiñ da c'houzout ur gudenn"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_A-brepoz ..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "A-brepoz Harddrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "Harddrake2"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Periantel kavet"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Kefluniañ ar mollad"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr ""
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "anavez"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Anavez"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "A bep seurt"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"Klikit ouzh un drobarzhell e-barzh ar wezenn a-gleiz a-benn ma ziskouez "
-"titouroù anezhañ amañ."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "eil derez"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "kentañ"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "engraver"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr "Ezkargañ roll ar perientel"
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Kont :"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Tremenger :"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Anv an ostiz :"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Dibabit reizhadur ho stokellaoueg, mar plij."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: standalone/logdrake:50
-#, fuzzy, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Mandriva Linux Control Center"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Diskouez hepken an deiz dibabet"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Rest/_Nevez"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Restr/_Digoriñ"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>D"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Restr/_Enrollañ"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>G"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Restr/_Gwarediñ dindan"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Restr/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Dibarzhoù/Arnodenn"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Skoazell/_A-brepoz ..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Dilesadur"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "Arveriad"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "Kemenandoù"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Reizhiad"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "klask"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr ""
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Dibarzhoù"
-
-#: standalone/logdrake:134
-#, fuzzy, c-format
-msgid "Matching"
-msgstr "O vrasjediñ"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr ""
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Dibabit ur restr"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Deiziadur"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Restrad"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr ""
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr ""
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "gortozit mar plij, emaon o lenn ar restr : %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
-
-#: standalone/logdrake:378
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Anv ar domani"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "Servijer FTP"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Servijer Mailh Postfix"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Servijer Samba"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Servijer Webmin"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Servijer xinetd"
-
-#: standalone/logdrake:395
-#, fuzzy, c-format
-msgid "Configure the mail alert system"
-msgstr "Kefluniañ ur rouedad"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:403
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Petra e fell deoc'h da ober ?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Dibarzhoù ar serjivioù"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "Kargañ an dibarzhoù"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Sammad"
-
-#: standalone/logdrake:429
-#, fuzzy, c-format
-msgid "Alert configuration"
-msgstr "Kefluniañ ar proksioù"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Roit ho chomlec'h postel mar plij"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr ""
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr ""
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Enrollañ e ..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Dibabit seurt ho logodenn, mar plij."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Kendarvan an trede nozelenn ?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Testañ al logodenn"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Testit ho logodenn mar plij :"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "Bev eo ar rouedad war an etrefas %s"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr ""
-"Marv eo ar rouedad war an etrefas %s. Klikit ouzh « Kefluniañ ar Rouedad »"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Kevreañ %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Digevreañ %s"
-
-#: standalone/net_applet:70
-#, fuzzy, c-format
-msgid "Monitor Network"
-msgstr "Adaozañ adalek ar restr"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Kefluniañ ar Rouedad"
-
-#: standalone/net_applet:73
-#, c-format
-msgid "Watched interface"
-msgstr "Etrefasoù sellet"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Profiloù"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "Skoazell enlinenn"
-
-#: standalone/net_applet:223
-#, fuzzy, c-format
-msgid "Interactive intrusion detection"
-msgstr "Dinoiñ dre ardivink moullerezioù"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr ""
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr ""
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, fuzzy, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Kefluniadur kavet ar moger tan :"
-
-#: standalone/net_applet:301
-#, fuzzy, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Mennout a rit implijout an arc'hwel-mañ ?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, fuzzy, c-format
-msgid "Attack details"
-msgstr "Munudoù ebet"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr ""
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Etrefas rouedad: %s"
-
-#: standalone/net_applet:324
-#, fuzzy, c-format
-msgid "Attack type: %s"
-msgstr "seurt : %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Komenad: %s"
-
-#: standalone/net_applet:326
-#, fuzzy, c-format
-msgid "Attacker IP address: %s"
-msgstr "Chomlec'h IP ar dreuzell"
-
-#: standalone/net_applet:327
-#, fuzzy, c-format
-msgid "Attacker hostname: %s"
-msgstr "Anv ostiz ar proksi :"
-
-#: standalone/net_applet:328
-#, fuzzy, c-format
-msgid "Service attacked: %s"
-msgstr "Merour ar servijoù"
-
-#: standalone/net_applet:329
-#, fuzzy, c-format
-msgid "Port attacked: %s"
-msgstr "Porzh : %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Kefluniadur ar rouedad"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Etread"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr "Tizh kas :"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr "Tizh tigas :"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"Amzer ar\n"
-"gevreadenn :"
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Gortoz mar plij, o arnodiñ ho gevreadenn ..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "Digevreañ diwar an Internet "
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "Kevreañ diwar an Internet "
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Sac'het eo digevreañ diwar an Internet"
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Echu eo digevreañ diwar an Internet"
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Echu eo ar gevreadenn"
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Kefluniañ ar Livioù"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "kaset : "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "enkarget : "
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "well-wazh"
-
-#: standalone/net_monitor:406
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Restroù lec'hel"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "Kevreadenn Internet ebet"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "O lenn roadoù diwar-benn ar moullerezioù staliet ..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "Ostihl melestradur ar moullerezioù %s"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Oberoù"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Ouzhpennañ ur voullerez"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Lakaat dre _ziouer"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Aozañ"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Dilemel"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/Mod _mailh"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Adtresañ"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/Kefluniañ _CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Klask :"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Arloañ ar sil"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr ""
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Anv ar Voulerez"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Seurt ar gevreadenn"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Anv ar servijer"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Ouzhpennañ ur voullerez"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Ouzpennañ ur voullerez nevez war ar reizhiad"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, fuzzy, c-format
-msgid "Set as default"
-msgstr "dre ziouer"
-
-#: standalone/printerdrake:229
-#, fuzzy, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Ha mennout a rit amprouiñ moullañ skrid ?"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Kemmañ ar voulerez diuzet"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Lemel ar voulerez diuzet"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Adtresañ ar roll"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "Kefluniañ CUPS"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "Kefluniañ ar reizhiad moullañ CUPS"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Bev"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Marv"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Obererour : "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "Melestradur ar moullerezioù %s"
-
-#: standalone/scannerdrake:51
-#, fuzzy, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"Bremanaet e tle bezañ ar pabak-mañ\n"
-"Ha sur oc'h e mennit e ziuzañ ?"
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "O terriñ Scannerdrake"
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr ""
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "O klask an eiltreseroù kefluniet ..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "O klask eiltreseroù nevez ..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr ""
-
-#: standalone/scannerdrake:104
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Mennout a rit kefluniañ ur voullerez ?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: standalone/scannerdrake:131
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Dibabit ur gobari c'hrafek"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Doare kavet : %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Porzh : %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr " (N'EO KET SKORAET)"
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "N'eo ket skoraet gant Linux %s."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "Ne staliit ket restr ar meriant"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr ""
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Staliañ restr ar meriant eus"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Dibabit restr ar meriant"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "Staliañ restroù ar meriant evit"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "Dibabit restr ar meriant evit %s"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Ne m'eus ket staliañ restroù ar meriant evit %s !"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr ""
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "N'eo ket skoraet %s"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr ""
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "dibabit ur drobarzhell"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "O klask eiltreseroù ..."
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "O lakaat molladoù ar c'halon ..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "Ho evezh !"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:431
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: standalone/scannerdrake:432
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Klask an eiltreserien nevez"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Ouzhpennañ un eiltreser gant an dorn"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Staliañ/Bremañaat ar restroù meriant"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr ""
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Reizhiadoù a-bell holl"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Ar reizhiad-mañ"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr ""
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Ouzhpennañ un ostiz"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Kemmañ an ostiz diuzet"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Lemel ar ostiz diuzet"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Chomlec'h IP/Anv ar oztiz :"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Ret eo deoc'h reiñ an anv-ostiz pe ur chomlec'h IP.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: standalone/scannerdrake:782
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Implij da saveteiñ"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: standalone/scannerdrake:940
-#, fuzzy, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"Bremanaet e tle bezañ ar pabak-mañ\n"
-"Ha sur oc'h e mennit e ziuzañ ?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr ""
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr "- Dilemet oa %s\n"
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Ouzhpennet oa an trobarzhelloù zo : %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- Ouzhpennet oa %s\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Emaon o klask ar perientel"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Mennout a rit lañsañ an ostilh dereat ?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Yezh"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Aotre"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Kefluniañ al logodenn"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Dinoiñ ar bladenn galet"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Dibabit renkad ar staliadur"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Dibabit ho stokellaoueg"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "O parzhañ"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Furmadiñ parzhadurioù"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Dibabit pakadoù da staliañ"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Staliañ ar reizhiad"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "Tremenger ar merour"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Ouzhpennañ un arveriad"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Kefluniañ ar rouedad"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Staliañ ar c'harger loc'hañ"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Kefluniañ X"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Kefluniañ servijoù"
-
-#: steps.pm:32
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Staliañ ar reizhiad"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Dilezel ar staliadur"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Ha reizh eo ?"
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "N'eus restr dibabet ebet"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr ""
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr ""
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "Hevelep renkell ebet"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "Hevelep restr ebet"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Astenn ar wezenn"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Plegañ ar wezenn"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Gwintañ etre kompez ha rummet dre strollad"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"N'eo ket staliadet %s\n"
-"Klikit ouzh « A heul » evit staliañ pe ouzh « Nullañ » evit guitaat"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr " Sac'het eo ar staliadur"
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "O taremprediñ al lec'hienn Mandriva Linux evit kaout roll ar pakadoù "
-#~ "hegerz ..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Staliadur Mandriva Linux %s"
-
-#~ msgid "hd"
-#~ msgstr "hd"
-
-#~ msgid "tape"
-#~ msgstr "bandenn"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-Rouedad gant webdav.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Loc'hañ gant grafikoù"
-
-#~ msgid "choose image file"
-#~ msgstr "Dibabit ur restr skeudenn"
-
-#~ msgid "Browse"
-#~ msgstr "Ergerzhet"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Kefluniañ ho skeudenn loc'hañ"
-
-#~ msgid "Preview"
-#~ msgstr "Rakgwel"
-
-#~ msgid "Choose color"
-#~ msgstr "Dibabit ur liv"
-
-#~ msgid "Notice"
-#~ msgstr "Kemenn"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Ret eo deoc'h dibab restr ur skeudenn da gentañ !"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Emaon o krouiñ ar rakgwel ..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "Rakgwel BootSplash %s (%s)"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Lenner pladennig hegerz ebet"
-
-#, fuzzy
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Lakait ur bladennig gwerc'h el lenner %s"
-
-#~ msgid "No network card"
-#~ msgstr "Kartenn rouedad ebet"
-
-#~ msgid ""
-#~ "The following protocols can be used to configure an ethernet connection. "
-#~ "Please choose the one you want to use"
-#~ msgstr ""
-#~ "Ar c'homennadoù-mañ a c'hell bezañ implijet da gefluniañ ur gevreadenn "
-#~ "rouedad.\n"
-#~ "Dibabit unan e fell deoc'h implij mar plij"
-
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "Implijit ur sturier a zo staliet c'hoazh (%s)"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "N'oc'h eus ket dibabet un nodrezh bennak"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "N'eus furcher da gaout ebet ! Stalit unan mar plij"
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Lakait ur bladennig el lenner\n"
-#~ "Kollet e vo holl roadoù ar bladennig-se"
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "Lakait ur bladennig FAT el lenner %s"
-
-#~ msgid "This floppy is not FAT formatted"
-#~ msgstr "N'eo ket ur bladennig FAT"
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Kargañ eus/Enrollañ war ar bladennig"
-
-#~ msgid "Load from floppy"
-#~ msgstr "Assevel adalek ar bladennig"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Enrollañ war bladennig"
-
-#~ msgid "Package selection"
-#~ msgstr "Diuzadenn pakadoù"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "Assevelañ adalek ar bladennig"
-
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Lakait ur bladennig gant dibab ar pakadoù"
-
-#~ msgid "Can not find hdlist file on this mirror"
-#~ msgstr "N'hellan ket kavout ar restr hdlist war ar melezour-se"
-
-#~ msgid "Summary: "
-#~ msgstr "Diverrañ :"
-
-#~ msgid "YOUR TEXT HERE"
-#~ msgstr "Ho'ch testenn amañ"
-
-#~ msgid "Loading printer configuration... Please wait"
-#~ msgstr "O kargañ ar kefluniadur ar moullerezioù ... Gortozit mar plij"
-
-#~ msgid "Root password"
-#~ msgstr "Termeniñ tremenger root"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "Da beseurt pladenn e mennit dilec'hiañ ?"
-
-#~ msgid "Sector"
-#~ msgstr "Rann"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "Da beseurt rann e mennit dilec'hiañ ?"
-
-#~ msgid "Moving partition..."
-#~ msgstr "O tilec'hiañ ur parzhadur ..."
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "Fazi en ur zigeriñ %s evit skrivañ : %s"
-
-#~ msgid "Server Information:"
-#~ msgstr "Titouroù war ar servijer :"
-
-#~ msgid "Use SSL connection"
-#~ msgstr "Implifit ur gevreadenn SSL"
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Tchek (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Alaman"
-
-#~ msgid "Dvorak"
-#~ msgstr "Dvorak"
-
-#~ msgid "Spanish"
-#~ msgstr "Spagnol"
-
-#~ msgid "Finnish"
-#~ msgstr "Finnek"
-
-#~ msgid "French"
-#~ msgstr "Gall"
-
-#~ msgid "Norwegian"
-#~ msgstr "Norvegek"
-
-#~ msgid "Polish"
-#~ msgstr "Polonek"
-
-#~ msgid "Russian"
-#~ msgstr "Rusiek"
-
-#~ msgid "Swedish"
-#~ msgstr "Svedek"
-
-#~ msgid "Albanian"
-#~ msgstr "Albaniek"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Armeniek (kozh)"
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Armeniek (skriverez)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Armeniek (soniadel)"
-
-#~ msgid "Arabic"
-#~ msgstr "Arabek"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Azerbaidjanek (latin)"
-
-#~ msgid "Belgian"
-#~ msgstr "Belgian"
-
-#~ msgid "Bengali"
-#~ msgstr "Bengal"
-
-#~ msgid "Bulgarian (phonetic)"
-#~ msgstr "Bulgariek (soniadel)"
-
-#~ msgid "Bulgarian (BDS)"
-#~ msgstr "Bulgarek (BDS)"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Brasilek (ABNT-2)"
-
-#~ msgid "Bosnian"
-#~ msgstr "Bosnieg"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "Suis (reizhadur alaman)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "Suis (reizhadur gall)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Tchek (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Alaman (stokell marv ebet)"
-
-#~ msgid "Danish"
-#~ msgstr "Danek"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Dvorak (US)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Dvorak (Norvegek)"
-
-#~ msgid "Dvorak (Swedish)"
-#~ msgstr "Dvorak (Svedek)"
-
-#~ msgid "Estonian"
-#~ msgstr "Estoniek"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Jorjiek (reizhadur \"Rusiek\")"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Jorjiek (reizhadur \"Latin\")"
-
-#~ msgid "Greek"
-#~ msgstr "Gresianek"
-
-#~ msgid "Greek (polytonic)"
-#~ msgstr "Gresianek"
-
-#~ msgid "Hungarian"
-#~ msgstr "Hungareg"
-
-#~ msgid "Croatian"
-#~ msgstr "Kroatek"
-
-#~ msgid "Irish"
-#~ msgstr "Iwerzhoneg"
-
-#~ msgid "Israeli"
-#~ msgstr "Israelian"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Israelian (soniadel)"
-
-#~ msgid "Iranian"
-#~ msgstr "Iraniek"
-
-#~ msgid "Icelandic"
-#~ msgstr "Islandek"
-
-#~ msgid "Italian"
-#~ msgstr "Italianek"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Japonek (106 stokell)"
-
-#~ msgid "Kannada"
-#~ msgstr "Kanadian"
-
-#~ msgid "Korean keyboard"
-#~ msgstr "Stokellaoueg korean"
-
-#~ msgid "Latin American"
-#~ msgstr "Amerikan Latin"
-
-#~ msgid "Laotian"
-#~ msgstr "Laosiek"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Lituaniek AZERTY (kozh)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Lituaniek AZERTY (nevez)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Lituaniek QUERTY \"linenn sifroù\""
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Lituaniek QUERTY \"soniadel\""
-
-#~ msgid "Macedonian"
-#~ msgstr "Makedonia"
-
-#~ msgid "Mongolian (cyrillic)"
-#~ msgstr "Mongoliek (lizherenneg ar ruseg)"
-
-#~ msgid "Dutch"
-#~ msgstr "Hollandek"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Polonek (reizhadur qwerty)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Polonek (reizhadur qwerty)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Portugalek"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Kanadian (Kebek)"
-
-#~ msgid "Romanian (qwertz)"
-#~ msgstr "Romaniek (Yawertz)"
-
-#~ msgid "Romanian (qwerty)"
-#~ msgstr "Romaniek (qwerty)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Russian (soniadel)"
-
-#~ msgid "Saami (norwegian)"
-#~ msgstr "Sami (Norvegek)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Slovek"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Slovakek (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Slovakek (QWERTY)"
-
-#~ msgid "Serbian (cyrillic)"
-#~ msgstr "Serbiek (lizherenneg ar ruseg)"
-
-#~ msgid "Syriac"
-#~ msgstr "Siriak"
-
-#~ msgid "Syriac (phonetic)"
-#~ msgstr "Siriak (soniadel)"
-
-#~ msgid "Telugu"
-#~ msgstr "Telegu"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Turkek (hengounel doare \"F\")"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Turkek (arnevez doare \"Q\")"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Ukrainiek"
-
-#~ msgid "Uzbek (cyrillic)"
-#~ msgstr "Ouzbek (lizherenneg ar ruseg)"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Yezh ar Viet-Nam QUERTY \"linenn sifroù\""
-
-#~ msgid "Yugoslavian (latin)"
-#~ msgstr "Yougoslaviek (latin)"
-
-#~ msgid "No devices found"
-#~ msgstr "N'eo ket trobarzhell ebet !"
-
-#~ msgid "Enable multiple profiles"
-#~ msgstr "Aotren lies trolinenn"
-
-#~ msgid "\t* browse the Web"
-#~ msgstr "\t* ergerzhet ar Web"
-
-#~ msgid "\t* <b>GDB</b>: the GNU Project debugger"
-#~ msgstr "\t* <b>GDB</b> : an Dizraener GNU"
-
-#~ msgid "Installation of %s failed. The following error occurred:"
-#~ msgstr "Staliadur %s a zo sac'het. Degouezhet eo ar fazi a heul :"
-
-#~ msgid "Delay before booting the default image"
-#~ msgstr "Gedvezh kent loc'hañ ar skeudenn dre ziouer"
-
-#~ msgid "Can not add a partition to _formatted_ RAID md%d"
-#~ msgstr "N'hellan ket ouzhpennañ ur parzhadur da RAID md%d _furmadet_"
-
-#~ msgid "mkraid failed (maybe raidtools are missing?)"
-#~ msgstr "mkraid sac'het (raidtools a vank emichañs ?)"
-
-#~ msgid "First sector of boot partition"
-#~ msgstr "Rann gentañ ar parzhadur loc'hañ"
-
-#~ msgid "Bootloader installation"
-#~ msgstr "Staliadur c'harger loc'hañ"
-
-#~ msgid "The package %s is going to be removed."
-#~ msgstr "Ar pakad %s a zo war-nes bezañ lamet."
-
-#~ msgid "4 billion colors (32 bits)"
-#~ msgstr "4 miliard a livioù (32 bit)"
-
-#~ msgid "Here is the full list of keyboards available"
-#~ msgstr "Setu eo listenn leun ar stokellaoueg holl"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
deleted file mode 100644
index 219301567..000000000
--- a/perl-install/share/po/bs.po
+++ /dev/null
@@ -1,26907 +0,0 @@
-# translation of bs.po to Bosanski
-# translation of DrakX-bs.po to Bosanski
-# Copyright (C) 2001, 2003, 2004, 2005. Free Software Foundation, Inc.
-# Amila Akagić <bono@lugbih.org>, 06. 2001.
-# Vedran Ljubovic <vljubovic@smartnet.ba>, 2002, 2003, 2004, 2005.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: bs\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-02-26 11:13+0100\n"
-"Last-Translator: Vedran Ljubovic <vljubovic@smartnet.ba>\n"
-"Language-Team: Bosanski <lokal@lugbih.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.3\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Koju USB ključ želite formatirati?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-"Sada ćete formatirati USB uređaj \"%s\". Ovo će obrisati sve podatke na "
-"njemu.\n"
-"Provjerite da li je navedeni uređaj USB ključ koji želite formatirati.\n"
-"Preporučujemo da privremeno iskopčate sve ostale USB uređaje dok radite ovu "
-"operaciju."
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "Ne mogu pisati na ključ"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-"Izgleda da je na USB ključu aktivirana zaštita od pisanja. Molim\n"
-"isključite ga, uklonite zaštitu i ponovo ga uključite."
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Pokušaj ponovo"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "Nastavi bez USB ključa"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-"Izgleda da je na USB ključu aktivirana zaštita, ali ga sada ne možemo\n"
-"bezbjedno isključiti.\n"
-"\n"
-"\n"
-"Kliknite na dugme da restartujete računar, isključite ga, uklonite zašitu\n"
-"od pisanja, ponovo utaknite ključ i pokrenite Mandriva Move."
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Restartuj"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Vaš USB ključ ne sadrži ispravne Windows (FAT) particije.\n"
-"Ova particija nam je potrebna za nastavak (osim toga, FAT particije\n"
-"su uobičajene tako da možete premještati svoje datoteke i pristupati\n"
-"im sa računara koji rade pod Windowsom). Molim uključite USB\n"
-"ključ sa Windows particijom.\n"
-"\n"
-"\n"
-"Takođe možete nastaviti bez USB ključ - još uvijek možete\n"
-"koristiti Mandriva Move kao običan Mandriva operativni sistem."
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Nisam pronašao USB ključ na vašem sistemu. Ako\n"
-"uključite USB ključ, Mandriva Move će imati mogućnost\n"
-"da transparentno čuva vaše podatke u vašem home direktoriju\n"
-"kao i konfiguraciju sistema za sljedeće pokretanje sistema na\n"
-"ovom ili nekom drugom računaru. Pažnja: ako sada uključite\n"
-"ključ, sačekajte nekoliko sekundi do ponovne detekcije.\n"
-"\n"
-"\n"
-"Takođe možete nastaviti bez USB ključa - još uvijek možete\n"
-"koristiti Mandriva Move kao običan Mandriva operativni sistem."
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "Potreban je ključ da snimite podatke"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "Ponovo detektuj USB ključ"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "Podešavanje USB ključa"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr ""
-"Molim sačekajte, podešavam sistemske konfiguracione datoteke na USB ključu..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr "Unesite vaše korisničke podatke, šifra će se koristiti za screensaver"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Automatska konfiguracija"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Molim sačekajte, otkrivam i podešavam uređaje..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Greška"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Došlo je do greške, ali ne znam kako da postupim u vezi toga.\n"
-"Nastavite na vlastiti rizik."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Došlo je do greške"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-"Došlo je do greške:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"Ovo je možda posljedica korumpiranih sistemskih datoteka\n"
-"na USB ključu, u kojem slučaju će njihovo brisanje i restart\n"
-"Mandriva Move riješiti problem. Da to uradite, kliknite na\n"
-"odgovarajuće dugme.\n"
-"\n"
-"\n"
-"Možete takođe pokušati restartovati i ukloniti USB ključ,\n"
-"ili istražiti njegov sadržaj iz nekog drugog OSa, ili čak\n"
-"možete pogledati log datteke na konzoli #3 i #4 da\n"
-"pokušate otkriti šta se događa."
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "Ukloni sistemske konfig datoteke"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "Samo restartuj"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "Možete nastaviti samo bez CDROM podrške"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Ubij ove programe"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "Nema CDROM podrške"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Pročitajte pažljivo!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"Ne možete koristiti drugi CDROM kada su pokrenuti sljedeći programi: \n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "Kopiram u memoriju da dozvolim uklanjanje CDROMa"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB ili više"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X server"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Izaberite X server"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Multi-head konfiguracija"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Vaš sistem podržava konfiguraciju više glava.\n"
-"Šta želite učiniti?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Ne mogu instalirati Xorg paket: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Izaberite veličinu memorije vaše grafičke kartice"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Xorg konfiguracija"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Koju konfiguraciju Xorg želite imati?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfiguriši sve glave odvojeno"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Koristi Xinerama ekstenziju"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Podesi samo karticu \"%s\"%s"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s sa 3D hardverskim ubrzanjem"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "Vaša kartica može imati podršku za 3D hardversko ubrzanje sa Xorg %s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s sa EKSPERIMENTALNIM 3D hardverskim ubrzanjem"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Vaša kartica može imati podršku za 3D hardversko ubrzanje sa Xorg %s,\n"
-"PAŽNJA OVO JE EKSPERIMENTALNA PODRŠKA I MOŽE ZALEDITI VAŠ RAČUNAR."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Izaberi korisnike"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Izlaz"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Grafička karta"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Rezolucija"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Test"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Opcije"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr "Vaša Xorg konfiguraciona datoteka je pokvarena, ignorišem je."
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zadržati izmjene?\n"
-"Trenutna konfiguracija je:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Izaberite monitor za glavu #%d"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Izaberite monitor"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Opšti"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Proizvođač"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-"Plug'n'Play probanje nije uspjelo. Molim izaberite odgovarajući monitor"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva kritična parametra su brzina vertikalnog osvježenja, što je brzina\n"
-"kojom se cijeli ekran osvježava, i brzina horizontalne\n"
-"sinhronizacije, što je brzina kojm se prikazuju skan-linije.\n"
-"\n"
-"VEOMA JE VAŽNO da ne izaberete tip monitora čiji je sinhronizacioni\n"
-"raspon izvan mogućnosti vašeg monitora: time možete oštetiti monitor.\n"
-" Ako niste sigurni, izaberite najmanju opciju."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Brzina horizontalnog osvježavanja"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Brzina vertikalnog osvježavanja"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 boja (8 bita)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 hiljada boja (15 bita)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 hiljada boja (16 bita)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miliona boja (24 bita)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Rezolucije"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Ostalo"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Izaberite rezoluciju i broj boja"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafička karta: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "U redu"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Odustani"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Pomoć"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Testiranje konfiguracije"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Želite li testirati konfiguraciju?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Upozorenje: testiranje ove grafičke karte može zalediti računar"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Došlo je do greške:\n"
-"%s\n"
-"Probajte promijeniti neke parametre"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Napuštam za %d sekundi"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Da li je ovo ispravno?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Raspored tastature: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Vrsta miša: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Uređaj miša: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HorizSync: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertRefresh: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafička karta: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafička memorija: %s kB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Broj boja: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolucija: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg drajver: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Grafički interfejs pri pokretanju"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Mogu podesiti vaš računar da automatski pokrene grafički interfejs (Xorg) "
-"pri pokretanju računara.\n"
-"Želite li da se Xorg automatski pokreće?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Izgleda da vaša grafička kartica ima TV-OUT konektor.\n"
-"On se može podesiti da radi koristeći frame-buffer.\n"
-"\n"
-"Za ovo je potrebno da uključite grafičku karticu u TV prije nego što upalite "
-"računar.\n"
-"Zatim u meniju bootloadera izaberite opciju \"TVout\"\n"
-"\n"
-"Imate li ovu mogućnost?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Koji standard koristi vaš TV?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Molim sačekajte"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Instalacija bootloadera u toku"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-"LILO će sada pridružiti novi Volume ID disku %s. Promjena Volume ID\n"
-"na startnom disku za Windows NT, 2000 ili XP sisteme je fatalna\n"
-"greška.\n"
-"Ovo upozorenje se ne odnosi na Windows 95 ili 98, te na NT diskove sa "
-"podacima.\n"
-"\n"
-"Da li da podesim novi ID volumena?"
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Instalacija bootloadera nije uspjela. Došlo je do sljedeće greške:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Možda ćete trebati promijeniti vaš Open Firmware boot uređaj\n"
-" da biste aktivirali bootloader.  Ako ne vidite upit bootloadera\n"
-" prilikom bootanja, držite Command-Option-O-F prilikom boota\n"
-" i unesite:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Zatim kucajte: shut-down\n"
-"Prilikom idućeg boota biste trebali vidjeti upit bootloadera."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Odlučili ste da na particiju instalirate bootloader.\n"
-"Ovo podrazumijeva da već imate bootloader na hard disku sa kojeg bootate "
-"(npr: System Commander).\n"
-"\n"
-"Sa kojeg diska vršite boot?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Prvi sektor diska (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Prvi sektor root particije"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Na disketi"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Preskoči"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub instalacija"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Gdje želite smjestiti bootloader?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguracija stila boota"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Glavne opcije bootloadera"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Navedite veličinu rama u MB"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcija ``Ograniči opcije komandne linije'' je beskorisna bez šifre"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Šifre se ne poklapaju"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Molim pokušajte ponovo"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Bootloader koji ćete koristiti"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Boot uređaj"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Čekanje prije bootanja default image-a"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Uključi ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "Prinudi bez APICa"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "Prinudi bez Lokalnog APICa"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Šifra"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Šifra (ponovo)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Ograniči opcije komandne linije"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "ograniči"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Očisti /tmp prilikom svakog boota"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Precizna veličina RAMa ako je potrebno (pronađeno %d MB)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Init poruka"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Čekanje na Open Firmware"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Vrijeme za boot kernela"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Omogući boot sa CDa?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Omogući boot sa OFa?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "Podrazumjevani OS?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Image"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Root"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Append"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Video mod"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "Mrežni profil"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Oznaka"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Default"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-veličina"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Prazna oznaka nije dozvoljena"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Morate navesti image kernela"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Morate navesti root particiju"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Ova oznaka je već u upotrebi"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Koju vrstu opcije želite dodati?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Ostali OSi (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Ostali OSi (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Ostali OSi (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Ovo su trenutne opcije u vašem boot meniju.\n"
-"Možete dodati nove ili promijeniti postojeće."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "pristup X programima"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "pristup rpm alatima"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "dozvoli \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "pristup administrativnim datotekama"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "pristup mrežnim alatima"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "pristup alatima za kompajliranje"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(već dodan %s)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Ova šifra je previše jednostavna"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Molim navedite korisničko ime"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Korisničko ime smije sadržati samo mala slova, brojeve, `-' i `_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Korisničko ime je predugačko"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Ovo korisničko ime je već dodano"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Dodaj korisnika"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Unesite korisnika\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Gotovo"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Prihvati korisnika"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Pravo ime"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Korisničko ime"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Shell"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Ikona"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Autologin"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mogu podesiti vaš računar da automatski prijavi jednog korisnika."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Da li želite koristiti ovu mogućnost?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Da"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Ne"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Izaberite default korisnika:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Izaberite window manager koji će se pokretati:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Molim izaberite jezik koji ćete koristiti."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "Izbor jezika"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Mandriva Linux podržava više jezika. Izaberite jezike koje\n"
-"želite instalirati. Oni će biti dostupni kada se završi vaša\n"
-"instalacija i restartujete vaš sistem."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Podrazumijeva se Unicode"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Svi jezici"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Zemlja"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Molim izaberite vašu zemlju."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Ovdje je puna lista svih dostupnih država"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "Ostale zemlje"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Više opcija"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "Metod unosa:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Ništa"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Bez dijeljenja"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Dozvoli svim korisnicima"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Želite li dozvoliti korisnicima da dijele (share) neke od njihovih "
-"direktorija?\n"
-"Ako uključite ovu opciju, korisnici će moći jednostavno kliknuti na opciju "
-"\"Share\" u\n"
-"Konqueroru ili Nautilusu.\n"
-"\n"
-"\"Izaberi korisnike\" vam omogućuje da podesite ovu opciju zasebno za svakog "
-"korisnika.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-"NFS: tradicionalni Unix sistem za dijeljenje datoteka, koji ima slabiju "
-"podršku na Macintoshu i Windowsu."
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-"SMB: sistem za dijeljenje datoteka koji koristi Windows, Mac OS X i većina "
-"modernih Linux sistema."
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-"Možete eksportovati koristeći NFS ili Sambu. Molim izaberite sistem koji "
-"želite koristiti."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Pokreni userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Zatvori"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Dijeljenje na nivou korisnika koristi grupu \"fileshare\". \n"
-"Možete dodavati korisnike u ovu grupu pomoću userdrake-a."
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Lokalna datoteka"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr "Smart Card"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Windows domena"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr "Active Directory sa SFU"
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr "Active Directory sa Winbind"
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "Lokalna datoteka:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-"Koristite \"lokalno\" za provjeru identiteta i informacije o korisnicima u "
-"lokalnoj datoteci"
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-"Govori vašem računaru da koristi LDAP za neke ili sve provjere identiteta. "
-"LDAP je sistem koji objedinjuje određene vrste informacija u vašoj "
-"organizaciji."
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-"Omogućuje vam da pokrećete grupu računara u istoj Network Information "
-"Service domeni sa zajedničkim datotekama šifara i grupa."
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Windows domena:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-"Winbind omogućuje dobavljanje informacija o korisnicima i provjeru "
-"identiteta putem Windows domene."
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr "Active Directory sa SFU:"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-"Kerberos je siguran sistem koji pruža uslugu mrežne provjere identiteta."
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Active Directory sa Winbind:"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Autentikacijski LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Server"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "jednostavno"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr "sloj sigurnosti (SASL/Kerberos)"
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr "Provjera identiteta kroz Aktivni imenik (Active Directory)"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Domena"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Server"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "LDAP baza korisnika"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr "Koristi anonimni BIND "
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr "LDAP korisnik kojem je dozvoljeno pregledanje Aktivnog imenika"
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr "Šifra za korisnika"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Enkripcija"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Provjera identiteta putem NISa"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS domen"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS server"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Da bi ovo radilo sa W2K PDCom, vjerovatno će biti potrebno da admin izvrši:\n"
-" C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add\n"
-"i restartuje server. Takođe će vam trebati korisničko ime i šifra "
-"administratora domena da biste pridružili računar Windows(tm) domenu.\n"
-"Ako mreža još nije aktivirana, DrakX će pokušati pristupanje domenu tek "
-"nakon što prođete kroz korak podešavanja mreže.\n"
-"Ako ovo podešavanje iz nekog razloga ne uspije i prijava na domen ne bude "
-"izvršena, izvršite naredbu 'smbpasswd -j DOMAIN -U USER%%PASSWORD' koristeći "
-"vašu Windows(tm) domenu, kao i administratorovo korisničko ime i šifru nakon "
-"pokretanja sistema.\n"
-"Naredba 'wbinfo -t' će provjeriti da li su vaši podaci ispravni."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autentikacijska Windows domena"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Korisničko ime domenskog administratora"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Administratorska šifra domena"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr "Koristi Idmap za smještaj UID/SID "
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr "Podrazumijevani Idmap "
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-"Podesite administratorsku (root) šifru i metode mrežne prijave korisnika"
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr "Podesite administratorsku (root) šifru"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Authentication method"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Bez šifre"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Ova šifra je previše jednostavna (mora biti duga najmanje %d karaktera)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Metod autentikacije"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "Ne mogu koristiti broadcast bez NIS domene"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Dobro dosli u izbornik operativnog sistema!\n"
-"\n"
-"Izaberite operativni sistem na listi iznad ili\n"
-"sacekajte da se pokrene podrazumjevani OS.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO sa grafičkim menijem"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO sa tekstualnim menijem"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "nema dovoljno prostora u /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Ne možete instalirati bootloader na %s particiju\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-"Konfiguracija vašeg bootloadera mora biti ažurirana pošto su particije "
-"renumerisane"
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"Ne mogu ispravno instalirati bootloader. Morate pokrenuti \"rescue\" sistem "
-"i izabrati \"%s\""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "Reinstalacija bootloadera"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuta"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundi"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "nedostaje kdesu"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "nedostaje consolehelper"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Austrija"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Australija"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Belgija"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brazil"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Kanada"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Švicarska"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Kostarika"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Češka"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Njemačka"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Danska"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estonija"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Španija"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finska"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Francuska"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Grčka"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Mađarska"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Irska"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Izrael"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Italija"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Japan"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Nizozemska"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Norveška"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Novi Zeland"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Poljska"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rusija"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Švedska"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slovačka"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Tajland"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Tajvan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Južna Afrika"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "SAD"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV je protokol koji vam omogućuje da direktorij web servera\n"
-"montirate lokalno i da ga tretirate kao lokalni direktorij (pod uslovom da\n"
-"je web server podešen kao WebDAV server). Ako želite dodati WebDAV\n"
-"tačke montiranja, izaberite \"Novi\"."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Novi"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Demontiraj"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Montiraj"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Tačka montiranja"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Molim unesite URL WebDAV servera"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL mora počinjati sa http:// ili https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Server:"
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Tačka montiranja: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Opcije: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Predlažemo da najprije napravite backup vaših podataka"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ako planirate koristiti aboot, budite pažljivi i ostavite slobodnog prostora "
-"(2048 sektora je dovoljno)\n"
-"na početku diska"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Čarobnjak"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Izaberi akciju"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Imate jednu veliku Microsoft Windows particiju.\n"
-"Predlažem da najprije promijenite veličinu te particije\n"
-"(kliknite na nju, zatim na \"Promijeni veličinu\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Kliknite na particiju"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Detalji"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Nije pronađen nijedan hard disk"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Prazno"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Tipovi file sistema:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Koristi ``%s'' umjesto toga"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Kreiraj"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Tip"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Obriši"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Najprije koristite ``Demontiraj''"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Izaberi drugu particiju"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Izaberi particiju"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Izlaz"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Poništi"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Prebaci u normalni mod"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Prebaci u ekspertni mod"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Svejedno nastavljate?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-"Trebali biste formatirati particiju %s.\n"
-"U suprotnom tačka montiranja %s neće biti zapisana u fstab.\n"
-"Da svejedno izađem?"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Izlaz bez spašavanja"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Izlazite bez pisanja tabele particija?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Želite li spasiti izmjene u /etc/fstab ?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Moraćete rebootati da bi izmjene tabele particija stupile na snagu"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Obriši sve"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Auto alokacija"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Još"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Informacije o hard disku"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Sve primarne particije su u upotrebi"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Ne mogu dodati više particija"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Da biste imali još particija, molim pobrišite jednu kako bi se mogla "
-"kreirati extended particija"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Snimi tabelu particija"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Vrati tabelu particija"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Spasi tabelu particija"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Ponovo učitaj tabelu particija"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Automatsko montiranje izmjenjivog medija"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Izaberite datoteku"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Backup tabela particija nema istu veličinu\n"
-"Ipak nastavljate?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Pokušavam da spasim tabelu particija"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Detaljne informacije"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Smanji"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Formatiraj"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Dodaj na RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Dodaj na LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Ukloni sa RAIDa"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Ukloni sa LVMa"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Modificiraj RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Koristi za loopback"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Napravi novu particiju"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Početni sektor: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Veličina u MB: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Tip datotečnog sistema: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Preference: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Naziv logičkog volumena "
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"Ne možete napraviti novu particiju\n"
-"(pošto ste dosegli maksimalan broj primarnih particija).\n"
-"Najprije uklonite primarnu particiju i napravite extended (proširenu) "
-"particiju."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Ukloniti loopback datoteku?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene tipa particije %s, svi podaci na toj particiji će biti "
-"izgubljeni"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Izmjena tipa particije"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Koji datotečni sistem želite?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Prebacujem sa ext2 na ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Gdje želite montirati loopback datoteku %s?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Gdje želite montirati uređaj %s?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne mogu izmjeniti tačku montiranja jer se ova particija koristi za "
-"loopback.\n"
-"Najprije uklonite loopback"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Gdje želite montirati uređaj %s?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Mijenjam veličinu"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Izračunavam granice FAT filesistema"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Ovoj particiji ne možete mijenjati veličinu"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Svi podaci na ovoj particiji bi trebali biti backupovani"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon promjene veličine particije %s, svi podaci na njoj će biti izgubljeni"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Izaberite novu veličinu"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Nova veličina u MB: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"Da bi se osigurao integritet podataka nakon promjene veličine, \n"
-"prilikom idućeg pokretanja Windows(TM) biće izvršena provjera datotečnog "
-"sistema"
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Izaberite postojeći RAID na koji ćete dodati"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "novi"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Izaberite postojeći LVM na koji ćete dodati"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "Naziv LVMa?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Ova particija se ne može koristiti za loopback"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Naziv loopback datoteke: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Dajte naziv datoteke"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Datoteku već koristi drugi loopback, izaberite neku drugu"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Datoteka već postoji. Želite li je koristiti?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Opcije montiranja"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Razno"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "uređaj"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "nivo"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "veličina chunka u KiB"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Budite oprezni: ova operacija je opasna."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Koju vrstu particioniranja?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Biće potrebno da rebootate prije nego što izmjene mogu stupiti na snagu"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Tabela particija za uređaj %s će biti zapisana na disk!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nakon formatiranja particije %s, svi podaci na toj particiji će biti "
-"izgubljeni"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Prebaci datoteke na novu particiju"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Sakrij datoteke"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Direktorij %s već sadrži neke podatke\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Premještam datoteke na novu particiju"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiram %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Uklanjam %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "particija %s je od sada poznata kao %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr "Oznake particija su promijenjene: "
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Uređaj: "
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "Devfs ime: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr "Oznaka volumena: "
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS slovo uređaja: %s (pretpostavka)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Tip: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Ime: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Početak: sector %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Veličina: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektora"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindar %d do %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Formatirana\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Nije formatirana\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Montirana\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback datoteka(e):\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Particija koja se boota po defaultu\n"
-"    (za MS-DOS boot, ne za lilo)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivo %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Veličina chunka %d KiB\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diskovi %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Naziv loopback datoteke: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Postoji mogućnost da je ova\n"
-"particija Driver particija. Vjerovatno\n"
-"biste je trebali ostaviti na miru.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Ova posebna Bootstrap\n"
-"particija je za\n"
-"dvojni boot vašeg sistema.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Samo za čitanje"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Veličina: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrija: %s cilindara, %s glava, %s sektora\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Info: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diskovi %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tip tabele particija: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "na kanalu %d id %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Ključ za kodiranje datotečnog sistema"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Izaberite vaš ključ za kodiranje datotečnog sistema"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ovaj ključ enkripcije je previše jednostavan (mora imati najmanje %d "
-"karaktera)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Ključevi enkripcije se ne poklapaju"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Ključ enkripcije"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Ključ enkripcije (još jednom)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Algoritam enkripcije"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Promijeni tip"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "Ne mogu se prijaviti koristeći korisničko ime %s (pogrešna šifa?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Potrebna je autentikacija na domeni"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Koje korisničko ime"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Još jedan"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Molim unesite vaše korisničko ime, šifru i domen da biste pristupili ovom "
-"računaru."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Korisničko ime"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Traži servere"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Traži nove servere"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Paket %s treba biti instaliran. Da li ga želite instalirati?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Nedostaje obavezan paket %s"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Instaliram pakete..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "Uklanjam pakete..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Montiram particiju %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montiranje particije %s u direktoriju %s nije uspjelo"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Provjeravam %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "greška u demontiranju %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Uključujem swap particiju %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiram particiju %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreiram i formatiram datoteku %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "Ne znam kako formatirati %s kao tip %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatiranje %s nije uspjelo"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"Ne ažuriraj vrijeme pristupa inode-u na ovom sistemu\n"
-"(npr. radi bržeg pristupa spool-u na news serverima)."
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"Može se montirati samo eksplicitno (tj.,\n"
-"opcija -a neće montirati i ovaj sistem)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr "Nemoj interpretirati karakter ili blok uređaje na datotečnom sistemu."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"Ne dozvoli izvršenje binarnih datoteka na montiranom\n"
-"datotečnom sistemu. Ova opcija bi mogla biti korisna za server\n"
-"koji ima datotečne sisteme koji sadrže programe za druge arhitekture."
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"Ne dozvoli bitima set-user-identifier i set-group-identifier\n"
-"da stupe na snagu. (Ovo se čini kao sigurno, ali je ustvari prilično\n"
-"nesigurno ako ste instalirali suidperl(1).)"
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Montiraj datotečni sistem samo za čitanje."
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "Sav U/I na datotečni sistem se treba izvršavati sinhrono."
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"Omogući običnom korisniku da montira datotečni sistem.\n"
-"Ime korisnika će biti zapisano u mtab tako da on može i demontirati\n"
-"datotečni sistem. Ova opcija podrazumijeva opcije noexec, nosuid i\n"
-"nodev (osim ako to ne izmijenite kasnijim opcijama, kao u slučaju\n"
-"linije user,exec,dev,suid )."
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "Daj dozvolu za pisanje običnim korisnicima"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "Daj dozvolu za čitanje običnim korisnicima"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "Ne možete koristiti JFS za particije manje od 16MB"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "Ne možete koristiti ReiserFS za particije manje od 32MB"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "sa /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "server"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Ne mogu pročitati tabelu particija na uređaju %s, previše je oštećena za "
-"mene :(\n"
-"Mogu pokušati da pobrišem loše particije (SVI PODACI će biti izgubljeni!).\n"
-"Drugo rješenje je da onemogućim DrakX da mijenja tabelu particija.\n"
-"(greška je %s)\n"
-"\n"
-"Slažete li se sa gubitkom svih particija?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Tačke montiranja moraju počinjati sa /"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Tačka montiranja se treba sastojati samo od brojeva i slova"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Već postoji particija sa tačkom montiranja %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Izabrali ste softversku RAID particiju kao root (/).\n"
-"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
-"Molim kasnije dodajte /boot particiju"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "Ne možete koristiti LVM logički volumen za tačku montiranja %s"
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Izabrali ste LVM logički volumen kao root (/).\n"
-"Nijedan bootloader nije u mogućnosti da rukuje sa ovim bez /boot particije.\n"
-"Molim kasnije dodajte /boot particiju"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-"Možda nećete biti u mogućnosti instalirati lilo (pošto lilo ne može rukovati "
-"LVom ili sa više PVa)"
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Ovaj direktorij treba ostati unutar korijenskog file sistema"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Potreban vam je pravi file sistem (ext2/ext3, reiserfs, xfs ili jfs) za ovu "
-"tačku montiranja\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "Ne možete koristiti šifrovani datotečni sistem za tačku montiranja %s"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nema dovoljno prostora za auto-alokaciju"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Nemam šta da radim"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Disketa"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Hard Disk"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CDROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD pržilica"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Traka"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Video kartica"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "TV kartica"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Drugi multimedijalni uređaj"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Zvučna kartica"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Web kamera"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Procesori"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "ISDN adapteri"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet kartica"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "ADSL adapteri"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Memorija"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "AGP kontroleri"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Štampač"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Joystick"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA kontroleri"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAID kontroleri"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontroleri"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire kontroleri"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCIA kontroleri"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI kontroleri"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "USB kontroleri"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "USB portovi"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus kontroleri"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Mostovi (bridges) i sistemski kontroleri"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Tastatura"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Miš"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Skener"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Nepoznat/Ostali"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Molim sačekajte... Primjenjujem konfiguraciju"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Nema alternativnog drajvera"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Nema nijedan poznat OSS/ALSA alternativni drajver za vašu zvučnu karticu (%"
-"s) koja trenutno koristi \"%s\""
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Podešavanje zvuka"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Ovdje možete izabrati alternativni drajver (ili OSS ili ALSA) za vašu zvučnu "
-"karticu (%s)."
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Vaša kartica trenutno koristi %s \"%s\" drajver (uobičajeni drajver za vašu "
-"karticu je \"%s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) je bio prvi API za zvuk. To je API neovisan od "
-"operativnog sistema (dostupan je na većini UNIX(tm) sistema), ali je vrlo "
-"elementaran i ograničen.\n"
-"Pored toga, svi OSS drajveri ponovo izmišljaju točak.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) je modularizovana arhitektura koja\n"
-"podržava prilično velik broj ISA, USB i PCI kartica.\n"
-"\n"
-"Ona takođe pruža mnogo viši API nego OSS.\n"
-"\n"
-"Da biste koristili ALSA, možete koristiti:\n"
-"- stari API kompatibilan sa OSSom\n"
-"- novi ALSA API koji pruža mnoge napredne mogućnosti, ali zahtijeva upotrebu "
-"ALSA biblioteke.\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Drajver:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Kako ukloniti problem?"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Upozorenje"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"Stari \"%s\" drajver je na crnoj listi.\n"
-"\n"
-"Prijavljeno je da ovaj drajver prilikom deinstalacije izaziva oops kernela.\n"
-"\n"
-"Stoga će novi drajver \"%s\" biti korišten tek nakon idućeg pokretanja "
-"sistema."
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Nema open source drajver"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Nema slobodnih drajvera za vašu zvučnu karticu (%s), ali postoji vlasnički "
-"drajver na \"%s\"."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Nema nijedan poznat drajver"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Nema poznatih drajvera za vašu zvučnu karticu (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Nepoznat drajver"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Greška: Drajver \"%s\" za vašu zvučnu karticu nije na listi"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Rješavanje problema sa zvukom"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Klasični način utvrđivanja bugova u zvučnom sistemu je izvršavanje\n"
-"sljedećih naredbi:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" će vam reći koji drajver inače koristi\n"
-"vaša kartica\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" će vam reći koji drajver je\n"
-"trenutno u upotrebi\n"
-"\n"
-"- sa \"/sbin/lsmod\" možete provjeriti da li je modul (drajver) učitan\n"
-"ili ne\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" i \"/sbin/chkconfig --list alsa\" vam\n"
-"govore da li su servisi sound i alsa podešeni da se pokreću na\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" će vam reći da li je zvuk utišan (muted) ili ne\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" vam govori koji program koristi zvučnu "
-"karticu.\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Dozvoli da sam odaberem drajver"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Slobodan izbor drajvera"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Ako stvarno mislite da znate koji drajver je odgovarajući za vašu karticu\n"
-"možete odabrati jedan sa gornje liste.\n"
-"\n"
-"Trenutni drajver za vašu \"%s\" zvučnu karticu je \"%s\""
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Auto prepoznavanje"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Nepoznat|Opšti"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Nepoznat|CPH05X (bt878) [razni proizvođači]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Nepoznat|CPH06X (bt878) [razni proizvođači]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Za većinu modernih TV kartica, bttv modul Linux kernela automatski "
-"prepoznaje odgovarajuće parametre.\n"
-"Ako je vaša kartica pogrešno prepoznata, ovdje možete prisiliti odgovarajući "
-"tip tunera i kartice. Samo izaberite parametre vaše TV karte."
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Model kartice:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Vrsta tunera:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "Broj capture buffera:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "broj capture buffera za mmap-ovani capture"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL postavka:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Podrška za radio:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "uključi radio podršku"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Prije nego što nastavimo, trebate pažljivo pročitati uvjete licence. Ona\n"
-"pokriva cijelu Mandriva Linux distribuciju. Ako se slažete sa svim\n"
-"uvjetima u njoj, izaberite opciju \"%s\". Ako ne, klikom na \"%s\" ćete\n"
-"restartovati vaš računar."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Prihvatam"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"GNU/Linux je višekorisnički sistem, što znači da svaki korisnik može imati\n"
-"vlastite preference, vlastite datoteke i tako dalje. Možete pročitati "
-"''Početnički\n"
-"vodič'' da biste saznali više o višekorisničkim sistemima. Ali za razliku "
-"od\n"
-"\"root\"-a, koji je administrator sistema, korisnicima koje dodate u ovom "
-"trenutku\n"
-"neće biti dozvoljeno da promijene ništa osim vlastitih datoteka i vlastite\n"
-"konfiguracije, čime je sistem zaštićen od nenamjernih ili zlonamjernih "
-"izmjena\n"
-"koje mogu uticati na cijeli sistem. Moraćete kreirati najmanje jednog "
-"korisnika\n"
-"za vas same -- ovo je račun koji trebate koristiti za rutinsku, svakodnevnu\n"
-"upotrebu. Iako je vrlo lako prijaviti se kao \"root\" da biste radili sve i "
-"svašta,\n"
-"to takođe može biti i vrlo opasno! Jedna greška može značiti da vaš sistem\n"
-"više ne radi. Ako napravite ozbiljnu pogrešku kao običan korisnik, najgore\n"
-"što se može desiti jeste da izgubite neke informacije, ali ne i da utičete "
-"na\n"
-"cijeli sistem.\n"
-"\n"
-"U prvom polju unosite vaše pravo ime i prezime. Naravno, ovo nije obavezno\n"
-"-- u stvari možete ovdje unijeti šta god hoćete. DrakX će koristiti prvu "
-"riječ\n"
-"koju unesete i kopirati je u polje \"%s\", što je ime koje će ovaj\n"
-"korisnik unositi da bi ušao na sistem. Ako želite, možete promijeniti\n"
-"ponuđenu vrijednost. Idući korak je da unesete šifru. Sa sigurnosne tačke\n"
-"gledišta, šifra neprivilegovanog (običnog) korisnika nije tako važna kao "
-"\"root\"\n"
-"šifra, ali to nije razlog da je zanemarite tako što ćete je ostaviti praznom "
-"ili\n"
-"prejednostavnom: na kraju krajeva, vaše lične datoteke je ono što je u\n"
-"riziku.\n"
-"\n"
-"Jednom kada kliknete na \"%s\", možete ih dodati još.\n"
-"Dodajte po jednog korisnika za svakog od vaših prijatelja: na primjer za\n"
-"vašeg oca ili sestru. Kliknite na \"%s\" kada završite dodavanje korisnika.\n"
-"\n"
-"Klikanjem na dugme \"%s\" možete promijeniti osnovni \"shell\" za tog\n"
-"korisnika (ponuđen je bash).\n"
-"\n"
-"Kada završite dodavanje svih korisnika, bićete upitani da odaberete\n"
-"korisnika koji se može automatski prijaviti prilikom pokretanja sistema.\n"
-"Ako ste zainteresovani za ovu mogućnost (i ne brinete previše o lokalnoj\n"
-"sigurnosti), izaberite željenog korisnika i window manager, zatim kliknite\n"
-"na \"%s\". Ako niste zainteresovani za to, isključite opciju\n"
-"\"%s\"."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Korisničko ime"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Dalje"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Ovdje su navedene Linux particije koje već postoje na vašem hard disku.\n"
-"Možete zadržati izbore koje je napravio čarobnjak, pošto su oni dobri za\n"
-"uobičajene instalacije. Ako napravite neke izmjene, morate, ako ništa\n"
-"drugo, definisati root particiju (\"/\"). Nemojte izabrati premalu "
-"particiju\n"
-"ili nećete moći instalirati dovoljno softvera. Ako želite držati vaše "
-"podatke\n"
-"na zasebnoj particiji, trebate takođe napraviti \"/home\" particiju (što je\n"
-"moguće samo ako imate više od jedne Linux particije na raspolaganju).\n"
-"\n"
-"Svaka particija je navedena ovako: \"Ime\", \"Kapacitet\".\n"
-"\n"
-"\"Ime\" se sastoji od: \"vrsta hard diska\", \"broj hard diska\", \"broj\n"
-"particije\" (na primjer, \"hda1\").\n"
-"\n"
-"\n"
-"\"Vrsta hard diska\" je \"hd\" ako je vaš hard disk IDE, a \"sd\" ako je\n"
-"u pitanju SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
-"diskova:\n"
-"\n"
-" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-"Kod SCSI hard diskova, \"a\" je \"disk sa najnižim SCSI IDom\", \"b\"\n"
-"je \"drugi najniži SCSI ID\", itd."
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Mandriva Linux instalacija se prostire na nekoliko CDova. Ako je neki\n"
-"paket smješten na drugom CDu, DrakX će izbaciti trenutni CD i zamoliti vas\n"
-"da ubacite neki drugi po potrebi. Ako nemate potreban CD pri ruci,\n"
-"samo kliknite na \"%s\", odgovarajući paketi neće biti instalirani."
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"Sada je vrijeme da izaberete koje programe želite instalirati na vaš\n"
-"sistem. Za Mandriva Linux su dostupne hiljade paketa, pa da bi\n"
-"njihovo upravljanje bilo lakše, organizovani su u grupe slične\n"
-"primjene.\n"
-"\n"
-"Paketi su sortirani u grupe ovisno o tipičnoj namjeni vašeg računara.\n"
-"U Mandriva Linuxu date su četiri predefinisane kategorije. Možete\n"
-"miješati i poklapati programe iz raznih grupa, pa tako instalacija ``Radna\n"
-"stanica'' može sadržavati programe iz grupe ``Programiranje''.\n"
-"\n"
-" * \"%s\": ako planirate da koristite vaš računar kao radnu stanicu, "
-"izaberite\n"
-"jednu ili više grupa koje se nalaze u ovoj kategoriji.\n"
-"\n"
-" * \"%s\": ako planirate koristiti vaš računar za programiranje, izaberite\n"
-"odgovarajuće grupe iz te kategorije. Posebna \"LSB\" grupa će podesiti\n"
-"vaš sistem tako da on bude sukladan specifikaciji Linux Standard Base\n"
-"koliko god je to moguće.\n"
-"\n"
-"   Izborom \"LSB\" grupe također ćete koristiti kernel serije \"2.4\",\n"
-"umjesto uobičajenog \"2.6\". Ovo je kako bi se osigurala 100%%\n"
-"sukladnost sistema sa LSBom. Ipak, čak i ako niste izabrali opciju\n"
-"\"LSB\" imaćete sistem koji je skoro 100%% sukladan sa LSBom.\n"
-"\n"
-" * \"%s\": ako je vaš računar zamišljen kao server, izaberite koje od\n"
-"uobičajenih servisa želite instalirati na vaš računar.\n"
-"\n"
-" * \"%s\": ovdje možete izabrati vašu preferiranu grafičku okolinu. Barem\n"
-"jedna od njih mora biti izabrana ako želite da imate grafički interfejs.\n"
-"\n"
-"Držanjem kursora miša iznad imena grupe će nakratko prikazati kratko\n"
-"objašnjenje o pojedinoj grupi.\n"
-"\n"
-"Možete aktivirati opciju \"%s\", koja je zgodna ako se upoznati sa "
-"ponuđenim\n"
-"paketima ili ako želite imati potpunu kontrolu nad onim što će se "
-"instalirati.\n"
-"\n"
-"Ako ste započeli instalaciju u \"%s\" režimu, možete isključiti sve grupe\n"
-"kako biste izbjegli instalaciju bilo kojeg novog paketa. Ovo je pogodno za\n"
-"popravljanje ili unaprjeđenje postojećeg sistema.\n"
-"\n"
-"Ako isključite sve grupe prilikom obavljanja obične instalacije (a ne\n"
-"upgrade), iskočiće dijalog koji vam nudi razne opcije za minimalnu "
-"instalaciju:\n"
-"\n"
-" * \"%s\": instalira minimalan mogući broj paketa potrebnih da imate\n"
-"funkcionalan grafički desktop.\n"
-"\n"
-" * \"%s\": instalira bazni sistem plus osnovne alate i njihovu\n"
-"dokumentaciju.\n"
-" Ova instalacija je prikladna za podešavanje servera.\n"
-"\n"
-" * \"%s\": ovo će instalirati apsolutni minimum paketa potrebnih da imate\n"
-"funkcionalan Linux sitsem. Sa ovom instalacijom imaćete samo komandnu\n"
-"liniju. Ukupna veličina ove instalacije je oko 65 megabajta."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Radna stanica"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Programiranje"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Grafičko okruženje"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Izbor pojedinačnih paketa"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Unaprijedi"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Sa X-om"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Sa osnovnom dokumentacijom"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Stvarno minimalna instalacija"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"Ako ste naveli da želite individualno izabrati pakete, biće vam prikazano\n"
-"stablo koje sadrži sve pakete klasifikovane po grupama i podgrupama.\n"
-"Pregledajući stablo, možete izabrati čitave grupe, podgrupe ili\n"
-"individualne pakete.\n"
-"\n"
-"Kad god izaberete paket na stablu, desno od njega se pojavljuje opis koji\n"
-"vam objašnjava svrhu paketa.\n"
-"\n"
-"!! Ako izaberete neki serverski paket, zato što ste specifično izabrali taj\n"
-"paket ili zato što je on dio grupe paketa, bićete zamoljeni da potvrdite da\n"
-"zaista želite da taj server bude instaliran. Mandriva Linux obično\n"
-"automatski pokreće sve instalirane servise prilikom pokretanja sistema.\n"
-"Čak i ako su sigurni i nemaju poznatih problema u trenutku pakovanja\n"
-"distribucije, sasvim je moguće da su neke sigurnosne rupe otkrivene\n"
-"nakon što je dovršena ova verzija Mandriva Linuxa. Ako niste sigurni\n"
-"čemu tačno služi taj paket ili zašto ga treba instalirati, kliknite na \"%s"
-"\".\n"
-"Klikom na \"%s\" instalirate navedene servise i oni će biti automatski\n"
-"pokrenuti tokom pokretanja sistema. !!\n"
-"\n"
-"Opcija \"%s\" se koristi da bi se isključio dijalog upozorenja\n"
-"koji se pojavljuje svaki put kada instalacioni program automatski izabere\n"
-"neki paket kako bi razriješio neku zavisnost. Pojedini paketi imaju\n"
-"zavisnost jedan od drugog u smislu da instalacija jednog paketa traži\n"
-"da bude instaliran i drugi. Instalacioni program može odrediti koji paketi\n"
-"su potrebni da bi se zadovoljila zavisnost i uspješno završila instalacija.\n"
-"\n"
-"Mala ikona sa disketom na dnu liste vam omogućuje da učitate listu paketa\n"
-"koja je napravljena tokom neke ranije instalacije. Ovo je korisno ako "
-"želite\n"
-"da imate nekoliko računara koji su identično podešeni. Nakon klika na ovu\n"
-"ikonu bićete zamoljeni da u disketnu jedinicu stavite disketu napravljenu\n"
-"tokom ranije instalacije. Pogledajte drugi savjet na zadnjem koraku da "
-"biste\n"
-"saznali kako se pravi ova disketa."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "Automatske ovisnosti"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": klikanjem na dugme \"%s\" otvorićete čarobnjak za\n"
-"podešavanje štampača. Konsultujte odgovarajuće poglavlje ``Vodiča za\n"
-"početnike'' za više informacija o tome kako podesiti novi štampač.\n"
-"Interfejs koji je tamo prikazan je vrlo sličan onom koji se koristi\n"
-"prilikom instalacije."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Podesi"
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Ovim dijalogom možete izabrati koje servise želite pokretati prilikom "
-"boota.\n"
-"\n"
-"Ovdje su predstavljeni svi servisi koji su dostupni u trenutnoj\n"
-"instalaciji. Pregledajte ih pažljivo i isključite sve one koji nisu\n"
-"potrebni prilikom boota.\n"
-"\n"
-"Kada izaberete servis dobićete kratki tekst koji objašnjava taj servis.\n"
-"Ipak, ako niste sigurni da li je servis koristan ili ne, sigurnije je da ne\n"
-"mijenjate predloženi izbor.\n"
-"\n"
-"!! Budite vrlo pažljivi sa ovim korakom ako namjeravate koristiti vaš\n"
-"računar kao server: vjerovatno ne želite da pokrenete neke servise koji\n"
-"vam ne trebaju. Molim vas da zapamtite da pojedini servisi mogu biti\n"
-"opasni ako su aktivni na serveru. Općenito, izaberite samo one servise\n"
-"koji vam stvarno trebaju. !!"
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"GNU/Linux koristi vrijeme u GMT (Greenwich Mean Time) obliku i prevodi ga\n"
-"u lokalno vrijeme u skladu sa vremenskom zonom koju ste izabrali. Ako je\n"
-"sat na vašoj matičnoj ploči podešen na lokalno vrijeme, možete isključiti "
-"ovu\n"
-"opciju isključujući \"%s\", što će saopštiti GNU/Linuxu da su sistemski sat\n"
-"i hardverski sat u istoj vremenskoj zoni. Ovo je korisno kada se na "
-"računaru\n"
-"takođe nalazi i drugi operativni sistem kao što je Windows.\n"
-"\n"
-"Opcija \"%s\" će automatski regulisati sat spajajući se na udaljeni time "
-"server\n"
-"na Internetu. Kako bi ova mogućnost radila, morate imati ispravnu Internet\n"
-"konekciju. Najbolje je izabrati time server negdje u vašoj blizini. Ova "
-"opcija\n"
-"će ustvari instalirati time server koji mogu koristiti i drugi računari u "
-"vašoj\n"
-"lokalnoj mreži."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardverski sat podešen na GMT"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Automatska sinhronizacija vremena"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"Grafička kartica\n"
-"\n"
-"   Instalacija obično automatski prepoznaje i podešava grafičku karticu\n"
-"koja je instalirana na računar. Ako se ovo nije desilo, možete izabrati\n"
-"sa liste karticu koja je ugrađena u vaš računar.\n"
-"\n"
-"   U slučaju da postoji više dostupnih servera za vašu karticu, sa ili bez\n"
-"3D ubrzanja, biće vam ponuđeno da izaberete server koji najbolje odgovara\n"
-"vašim potrebama."
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"X (skraćeno od X Window System) je srce GNU/Linux grafičkog interfejsa\n"
-"o kojem ovise sve grafičke okoline (KDE, GNOME, AfterStep,\n"
-"WindowMaker itd.) uključene u Mandriva Linux.\n"
-"\n"
-"Biće vam predstavljena lista različitih parametara koje možete promijeniti\n"
-"da biste dobili optimalan grafički prikaz.\n"
-"\n"
-"Grafička kartica\n"
-"\n"
-"   Instalacija obično automatski prepoznaje i podešava grafičku karticu\n"
-"koja je instalirana na računar. Ako se ovo nije desilo, možete izabrati\n"
-"sa liste karticu koja je ugrađena u vaš računar.\n"
-"\n"
-"   U slučaju da postoji više dostupnih servera za vašu karticu, sa ili bez\n"
-"3D ubrzanja, biće vam ponuđeno da izaberete server koji najbolje odgovara\n"
-"vašim potrebama.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Instalacioni program obično može prepoznati i podesiti monitor koji\n"
-"je povezan na vaš računar. Ako se ovo ne desi, možete odabrati neki\n"
-"monitor sa ove liste.\n"
-"\n"
-"\n"
-"\n"
-"Rezolucija\n"
-"\n"
-"   Ovdje možete izabrati rezoluciju i broj boja među vrijednostima koje su\n"
-"moguće na vašem hardveru. Izaberite one vrijednosti koje vam najbolje\n"
-"odgovaraju (moći ćete ih promijeniti nakon instalacije). Primjer izabrane\n"
-"konfiguracije je prikazan na slici monitora.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Ovisno o vašem hardveru, ova opcija možda neće biti dostupna.\n"
-"\n"
-"   Sistem će pokušati prikazati grafički ekran na željenoj rezoluciji.\n"
-"Ako možete vidjeti poruku tokom testa i odgovorite sa \"%s\", DrakX\n"
-"će produžiti na idući korak. Ako ne možete vidjeti poruku, to znači\n"
-"da je neki dio automatski prepoznate konfiguracije bio pogrešan.\n"
-"Test će automatski završiti nakon 12 sekundi, čime ćete biti vraćeni na\n"
-"meni. Mijenjajte postavke dok ne dobijete ispravan grafički prikaz.\n"
-"\n"
-"\n"
-"\n"
-"Opcije\n"
-"\n"
-"   Ovdje možete izabrati da li želite da vaš računar automatski pređe na\n"
-"grafički interfejs nakon uključivanja. Očito, trebate odgovoriti \"%s\" ako\n"
-"će vaš računar imati ulogu servera ili ako imate problema sa\n"
-"podešavanjem ekrana."
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Monitor\n"
-"\n"
-"   Instalacioni program obično može prepoznati i podesiti monitor koji\n"
-"je povezan na vaš računar. Ako se ovo ne desi, možete odabrati sa ove\n"
-"liste monitor koji je ustvari povezan na vaš računar."
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Rezolucija\n"
-"\n"
-"    Ovdje možete izabrati rezoluciju i broj boja među vrijednostima koje su\n"
-"moguće na vašem hardveru. Izaberite one vrijednosti koje vam najbolje\n"
-"odgovaraju (moći ćete ih promijeniti nakon instalacije). Primjer izabrane\n"
-"konfiguracije je prikazan na slici monitora."
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"U slučaju da postoji više dostupnih servera za vašu karticu, sa ili bez\n"
-"3D ubrzanja, biće vam ponuđeno da izaberete server koji najbolje odgovara\n"
-"vašim potrebama."
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Opcije\n"
-"\n"
-"   Ovdje možete izabrati da li želite da vaš računar automatski pređe na\n"
-"grafički interfejs nakon uključivanja. Očito, trebate odgovoriti \"%s\" ako\n"
-"će vaš računar imati ulogu servera ili ako imate problema sa\n"
-"podešavanjem ekrana."
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"Na ovom mjestu trebate izabrati gdje želite instalirati Mandriva Linux\n"
-"operativni sistem na vašem hard disku. Ako je disk prazan ili ako postojeći\n"
-"operativni sistem koristi sav prostor na njemu, potrebno je da ga\n"
-"particionirate. U biti, particioniranje hard diska predstavlja logičko\n"
-"organiziranje kako bi se stvorio prostor za instaliranje vašeg novog\n"
-"Mandriva Linux sistema.\n"
-"\n"
-"Pošto su efekti particioniranja obično nepovratni, i mogu voditi do gubitka\n"
-"podataka na eventualnom postojećem operativnom sistemu, particioniranje\n"
-"može biti zastrašujuće i stresno ako ste neiskusan korisnik. Srećom, "
-"postoji\n"
-"čarobnjak koji pojednostavljuje taj proces. Prije započinjanja, molim\n"
-"pročitajte pažljivo ovaj tekst i, prije svega, nemojte žuriti.\n"
-"\n"
-"Ovisno o konfiguraciji vašeg hard diska, može biti dostupno nekoliko\n"
-"mogućnosti:\n"
-"\n"
-" * \"%s\": Ova opcija vodi na automatsko particioniranje vašeg praznog\n"
-"diska (diskova). Ako izaberete ovu opciju, neće biti postavljana\n"
-"nikakva daljnja pitanja.\n"
-"\n"
-" * \"%s\": Čarobnjak je detektovao jednu ili više postojećih\n"
-"Linux particija na vašem hard disku. Ako ih želite zadržati, izaberite ovu\n"
-"opciju. U tom slučaju, bićete upitani da izaberete tačke montiranja koje\n"
-"odgovaraju svakoj od ovih particija. Automatski će biti predložene ranije\n"
-"tačke montiranja, i najčešće je pametno zadržati ih.\n"
-"\n"
-" * \"%s\": Ako je na vašem hard\n"
-"disku instaliran Microsoft Windows koji je zauzeo sav slobodan prostor,\n"
-"moraćete napraviti nešto slobodnog prostora za GNU/Linux. To možete učiniti\n"
-"brišući vašu Microsoft Windows particiju zajedno sa podacima (vidi opciju\n"
-"``Obriši čitav disk'' ispod) ili možete promijeniti veličinu vaše Microsoft\n"
-"Windows FAT ili NTFS particije. Promjena veličine se može izvršiti bez "
-"gubitka\n"
-"podataka, pod uslovom da prethodno defragmentirate Windows particiju\n"
-"i da ona koristi FAT format. Backupovanje vaših podataka je strogo\n"
-"preporučeno. Ova mogućnost je preporučena ako namjeravate koristiti i\n"
-"Mandriva Linux i Microsoft Windows na istom računaru.\n"
-"\n"
-"    Prije izbora ove opcije, molim da imate na umu da će, nakon ove\n"
-"procedure, veličina vaše Microsoft Windows particije biti manja nego\n"
-"trenutno. To znači da će Microsoft Windows prijavljivati da imate manje\n"
-"prostora za smještaj podataka ili instaliranje novog softwarea.\n"
-"\n"
-" * \"%s\": Ako želite da obrišete sve podatke i sve particije koje su\n"
-"prisutne na vašem hard disku i umjesto njih postavite vaš novi Mandriva\n"
-"Linux sistem, možete izabrati ovu opciju. Budite oprezni sa ovom\n"
-"mogućnošću, jer nećete moći poništiti vaš izbor nakon potvrde.\n"
-"\n"
-"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * \"%s\": Ova opcija se javlja kada je čitav disk zauzet Microsoft\n"
-"Windowsom. Ovo će jednostavno pobrisati sve na disku i početi od\n"
-"početka, particionirajući ga.\n"
-"\n"
-"   !! Ako izaberete ovu opciju, svi podaci na vašem disku će biti "
-"izgubljeni. !!\n"
-"\n"
-" * \"%s\": Ako želite da ručno particionirate vaš hard disk,\n"
-"izaberite ovu opciju. Budite oprezni -- to je moćan, ali i opasan izbor. "
-"Vrlo\n"
-"lako možete izgubiti sve vaše podatke. Zato ovu opciju ne preporučujemo,\n"
-"osim ako ste nešto ovakvo već radili i imate nekog iskustva. Više uputstava\n"
-"za korištenje DiskDrake alata možete naći u ``Vodiču za početnike'', "
-"odjeljak\n"
-"``Upravljanje vašim particijama''."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Koristi slobodan prostor"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Koristi postojeću particiju"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Koristi slobodan prostor na Windows particiji"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Pobriši čitav disk"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Ukloni Windows"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Ručno particioniranje diska"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"To je to. Instalacija je sada završena i vaš GNU/Linux sistem je spreman\n"
-"za upotrebu. Samo kliknite na \"%s\" da restartujete sistem. Ne zaboravite\n"
-"da izvadite instalacioni medij (CD-ROM ili disketu). Prva stvar\n"
-"koju ćete ugledati nakon što računar završi hardverske provjere je meni\n"
-"bootloadera, koji vam nudi izbor operativnog sistema koji želite pokrenuti.\n"
-"\n"
-"Dugme \"%s\" će vam ponuditi još dva dugmeta za:\n"
-"\n"
-" * \"%s\": da biste napravili instalacionu\n"
-"disketu koja će automatski izvršiti cijelu instalaciju bez intervencije\n"
-"operatora, sličnu instalaciji koju ste upravo konfigurisali.\n"
-"\n"
-"   Obratite pažnju na dvije različite opcije koje su dostupne nakon\n"
-"klikanja na ovo dugme:\n"
-"\n"
-"    * \"%s\". Ovo je djelomično automatizirana instalacija. Korak\n"
-"particioniranja je jedini interaktivni dio.\n"
-"\n"
-"    * \"%s\". Potpuno automatska instalacija: hard disk je\n"
-"potpuno prepisan, svi podaci su izgubljeni.\n"
-"\n"
-"   Ova mogućnost je vrlo prikladna kada instalirate nekoliko sličnih\n"
-"računara. Pogledajte odjeljak Automatska instalacija na našoj web stranici\n"
-"za više informacija.\n"
-"\n"
-" * \"%s\": snima listu paketa koje ste izabrali u ovoj\n"
-"instalaciji. Da biste upotrijebili ovaj izbor sa drugom instalacijom,\n"
-"ubacite disketu i započnite instalaciju. Na upitu, pritisnite tipku [F1]\n"
-"i ukucajte >>linux defcfg=\"floppy\" <<."
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Napravi auto-instalacijsku disketu"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Ponovi"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Automatizovano"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Spasi izbor paketa"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Ako želite koristiti neke stare GNU/Linux particije, možda ćete poželjeti\n"
-"da reformatirate neke od njih kako biste pobrisali podatke koje sadrže.\n"
-"Ako želite to učiniti, molim takođe izaberite i te particije.\n"
-"\n"
-"Molim obratite pažnju da nije neophodno formatirati sve postojeće\n"
-"particije. Morate reformatirati particije koje sadrže operativni sistem\n"
-"(kao što su \"/\", \"/usr\" ili \"var\") ali ne morate reformatirati "
-"particije\n"
-"koje sadrže podatke koje želite zadržati (tipično /home).\n"
-"\n"
-"Molim da pažljivo izaberete particije. Nakon formatiranja, svi podaci na\n"
-"odabranim particijama će biti pobrisani i nećete biti u mogućnosti da ih\n"
-"povratite.\n"
-"\n"
-"Kliknite na \"%s\" kada budete spremni za formatiranje particija.\n"
-"\n"
-"Kliknite na \"%s\" ako želite da izaberete druge particije za instalaciju\n"
-"vašeg novog Mandriva Linux operativnog sistema.\n"
-"\n"
-"Kliknite na \"%s\" da izaberete particije koje želite provjeriti radi\n"
-"loših blokova."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Nazad"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"Kada završite instalaciju Mandriva Linuxa, moguće je da su neki paketi\n"
-"ažurirani od zadnjeg izdanja. Moguće je da su ispravljeni bugovi ili\n"
-"rješena neka sigurnosna pitanja. Ako želite iskoristiti ova unaprjeđenja,\n"
-"možete ih sada dobaviti sa Interneta. Izaberite \"%s\" ako imate ispravnu\n"
-"Internet vezu, ili \"%s\" ako ćete radije instalirati ažurirane pakete\n"
-"kasnije.\n"
-"\n"
-"Ako izaberete \"%s\" dobićete listu web lokacija sa kojih se mogu skinuti\n"
-"novi paketi. Izaberite ono najbliže vama. Pojaviće se stablo za izbor\n"
-"paketa: pregledajte izabrano i pritisnite \"%s\" da dobavite i\n"
-"instalirate izabrane pakete, ili \"%s\" za prekid."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Instalacija"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"Na ovom mjestu, DrakX vam omogućuje da izaberete sigurnosni nivo\n"
-"koji želite imati na ovom računaru. Kao pravilo, sigurnosni nivo treba biti\n"
-"tim viši što su važniji podaci na računaru, a pogotovo ako će računar biti\n"
-"direktno izložen Internetu. Većim nivoom sigurnosti obično gubite na\n"
-"jednostavnosti korištenja.\n"
-"\n"
-"Ako ne znate šta izabrati, zadržite ponuđenu opciju. Možete promijeniti\n"
-"nivo sigurnosti naknadno koristeći program draksec iz Mandriva Linux\n"
-"Kontrolnog centra.\n"
-"\n"
-"Polje \"%s\" obavještava sistem o korisniku koji će biti odgovoran za\n"
-"sigurnost. Njemu će biti upućena sigurnosna obavještenja."
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Sigurnosni administrator"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Sada trebate izabrati koje particije želite koristiti za instalaciju vašeg\n"
-"Mandriva Linux sistema. Ako su particije već definisane, iz prijašnje\n"
-"GNU/Linux instalacije ili nekim drugim alatom za particioniranje, možete\n"
-"koristiti postojeće particije. U suprotnom, sada morate definisati\n"
-"particije vašeg hard diska.\n"
-"\n"
-"Da biste napravili particije, najprije morate izabrati hard disk. Možete\n"
-"izabrati disk za particioniranje klikom na ''hda'' za prvi IDE disk, "
-"''hdb''\n"
-"za drugi, ''sda'' za prvi SCSI disk i slično.\n"
-"\n"
-"Pri particioniranju hard diska, možete koristiti sljedeće opcije:\n"
-"\n"
-" * \"%s\": ova opcija briše sve particije na izabranom hard disku\n"
-"\n"
-" * \"%s\": ova opcija vam omogućuje da automatski napravite ext3\n"
-"i swap particije u slobodnom prostoru vašeg hard diska\n"
-"\n"
-"\"%s\" omogućuje pristup dodatnim mogućnostima:\n"
-"\n"
-" * \"%s\": snima tabelu particija na disketu. Ovo je korisno za\n"
-"kasnije vraćanje tabele particija, ako je potrebno. Strogo je preporučeno\n"
-"da izvršite ovaj korak.\n"
-"\n"
-" * \"%s\": omogućuje vam da vratite ranije snimljenu tabelu\n"
-"particija sa diskete.\n"
-"\n"
-" * \"%s\": ako je vaša tabela particija oštećena, možete je pokušati\n"
-"obnoviti koristeći ovu opciju. Molim budite pažljivi i zapamtite da\n"
-"ova opcija ne uspijeva svaki put.\n"
-"\n"
-" * \"%s\": poništava sve promjene i ponovo učitava originalnu tabelu\n"
-"particija sa hard diska.\n"
-"\n"
-" * \"%s\": isključivanjem ove opcije ćete prisiliti korisnike da ručno\n"
-"montiraju i demontiraju izmjenjive medije kao što su diskete i\n"
-"CD-ROMovi.\n"
-"\n"
-" * \"%s\": koristite ovu opciju ako želite koristiti čarobnjak za\n"
-"particioniranje vašeg hard diska. Ovo je preporučeno ako nemate\n"
-"izraženo razumijevanje particioniranja.\n"
-"\n"
-" * \"%s\": koristite ovu opciju da poništite vaše izmjene.\n"
-"\n"
-" * \"%s\": omogućuje dodatne akcije na particijama (tip, opcije,\n"
-"formatiranje) i daje više informacija o hard disku.\n"
-"\n"
-" * \"%s\": kada završite particioniranje diska, ovo će zapisati\n"
-"vaše izmjene na disk.\n"
-"\n"
-"Prilikom definisanja veličine particije, možete fino podešavati veličinu\n"
-"particije koristeći dugmad sa strjelicama na vašoj tastaturi.\n"
-"\n"
-"Napomena: svaku opciju možete postići tastaturom. Između particija\n"
-"se krećete koristeći dugme [Tab] i strjelice [Gore/Dolje].\n"
-"\n"
-"Kada izaberete particiju, možete koristiti:\n"
-"\n"
-" * Ctrl-C da napravite novu particiju (ako ste izabrali prazan prostor)\n"
-"\n"
-" * Ctrl-D da obrišete particiju\n"
-"\n"
-" * Ctrl-M da podesite tačku montiranja\n"
-"\n"
-"Da biste dobili informacije o raznim tipovima datotečnog sistema koji\n"
-"su dostupni, pročitajte poglavlje o ext2FS iz ''Referentnog priručnika''.\n"
-"\n"
-"Ako instalirate na PPC računar, trebate napraviti malu HFS ''bootstrap''\n"
-"particiju od najmanje 1 MB koju će koristiti yaboot bootloader. Ako se\n"
-"odlučite da ovu particiju učinite nešto većom, npr. 50 MB, primjetićete\n"
-"da je ona korisno mjesto za čuvanje rezervnog kernela ili ramdisk slika\n"
-"za hitne slučajeve."
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Automatsko montiranje izmjenjivog medija"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Prekidač normalnog/ekspertnog moda"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Na vašem hard disku ustanovljeno je više od jedne Microsoft particije.\n"
-"Molim izaberite onu koju želite smanjiti kako biste instalirali vaš\n"
-"Mandriva Linux operativni sistem.\n"
-"\n"
-"Svaka particija je navedena ovako: \"Linux ime\", \"Windows ime\",\n"
-"\"Kapacitet\".\n"
-"\n"
-"\"Linux ime\" se sastoji od: \"vrste hard diska\", \"broja hard diska\",\n"
-"\"broja particije\" (na primjer, \"hda1\").\n"
-"\n"
-"\"Vrsta hard diska\" je \"hd\" ako je vaš hard disk IDE, a \"sd\" ako je\n"
-"u pitanju SCSI hard disk.\n"
-"\n"
-"\"Broj hard diska\" je uvijek slovo nakon \"hd\" ili \"sd\". Kod IDE hard\n"
-"diskova:\n"
-"\n"
-" * \"a\" znači \"master hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"b\" znači \"slave hard disk na primarnom IDE kontroleru\";\n"
-"\n"
-" * \"c\" znači \"master hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-" * \"d\" znači \"slave hard disk na sekundarnom IDE kontroleru\";\n"
-"\n"
-"Kod SCSI hard diskova, \"a\" je \"disk sa najnižim SCSI IDom\", \"b\"\n"
-"je \"drugi najniži SCSI ID\", itd.\n"
-"\n"
-"\"Windows ime\" je slovo kojim je vaš hard disk označen pod Windowsom\n"
-"(prva particija prvog diska se zove \"C:\")."
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"%s\": provjerite trenutni izbor države. Ako se ne nalazite ovdje,\n"
-"kliknite na dugme \"%s\" i izaberite neku drugu državu. Ako se vaša\n"
-"zemlja ne nalazi na listi, kliknite na dugme \"%s\" kako biste dobili\n"
-"listu svih država."
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"Ovaj korak se aktivira samo ako je na vašem računaru pronađena postojeća\n"
-"GNU/Linux particija.\n"
-"\n"
-"DrakX sada treba znati da li želite izvršiti novu instalaciju ili\n"
-"nadogradnju postojećeg Mandriva Linux sistema:\n"
-"\n"
-" * \"%s\". Najčešće ovo će u potpunosti obrisati stari sistem. Ipak,\n"
-"ovisno o vašoj šemi particioniranja, možete spriječiti da neki od vaših\n"
-"postojećih podataka (prije svega \"home\" direktoriji) budu prepisani.\n"
-"Ako želite promijeniti particioniranje starog hard diska ili promijeniti\n"
-"datotečni sistem, trebate koristiti ovu opciju.\n"
-"\n"
-" * \"%s\". Ova vrsta instalacije vam omogućuje da ažurirate pakete\n"
-"koji su trenutno instalirani na vašem Mandriva Linux sistemu. Vaša trenutna\n"
-"šema particioniranja i korisnički podaci neće biti izmijenjeni. Većina\n"
-"ostalih koraka konfiguracije ostaju kao što jesu, slično običnoj "
-"instalaciji.\n"
-"\n"
-"Opcija ''Nadogradi'' bi trebala raditi ispravno na Mandriva Linux sistemima\n"
-"koji koriste verziju \"8.1\" ili kasniju. Obavljanje nadogradnje na ranijim\n"
-"verzijama Mandriva Linuxa, prije verzije \"8.1\", nije preporučeno."
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Ovisno o jeziku koji izaberete (), DrakX će\n"
-"automatski izabrati određeni tip tastature. Provjerite da li vam izabrano\n"
-"odgovara ili odaberite neki drugi raspored tastature.\n"
-"\n"
-"Ipak, možda nemate tastaturu koja tačno odgovara vašem jeziku: npr.\n"
-"ako ste Švajcarac koji govori engleski, možda imate švajcarsku tastaturu.\n"
-"Ili ako govorite engleski ali se nalazite u Kvibeku, možda ćete se naći u\n"
-"situaciji gdje se vaš jezik i tastatura ne poklapaju. U svakom slučaju, "
-"ovaj\n"
-"korak instalacije vam omogućava da izaberete odgovarajuću tastaturu sa "
-"liste.\n"
-"\n"
-"Kliknite na dugme \"%s\" kako bi vam bila predstavljena potpuna lista\n"
-"podržanih tastatura.\n"
-"\n"
-"Ako izaberete raspored tipaka koji je baziran na ne-latiničnoj abecedi,\n"
-"sljedeći dijalog će vam ponuditi da izaberete tipke pomoću kojih možete\n"
-"prebaciti tastaturu između latiničnog i ne-latiničnog rasporeda."
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"Prvi korak je da izaberete preferirani jezik.\n"
-"\n"
-"Vaš izbor preferiranog jezika će se odraziti na jezik dokumentacije,\n"
-"instalacione procedure i generalno sistema. Najprije izaberite oblast u\n"
-"kojoj se nalazite, a zatim jezik kojim govorite.\n"
-"\n"
-"Klikanjem na dugme \"%s\" možete izabrati druge jezike koje\n"
-"želite instalirati na vašu radnu stanicu, time instalirajući sistemsku\n"
-"dokumentaciju i programe za svaki od izabranih jezika. Na primjer, ako\n"
-"će vaš računar koristiti osobe iz španije, izaberite Engleski kao osnovni\n"
-"jezik na listi, a \"%s\" u oblasti Više opcija.\n"
-"\n"
-"O UTF-8 (Unicode) podršci. Unicode je novi način kodiranja znakova čiji\n"
-"je cilj da obuhvati sve postojeće jezike. Ipak puna podrška za njega pod\n"
-"GNU/Linuxom je još uvijek u razvoju. Iz tog razloga, Mandriva Linux će ga\n"
-"koristiti ovisno o drugim izborima korisnika:\n"
-"\n"
-" * Ako izaberete jezike sa raširenim starim kodiranjem (latin1 jezici, "
-"ruski,\n"
-"japanski, kineski, korejanski, tajlandski, grčki, turski, većina iso-8859-2\n"
-"jezika), biće korišteno staro kodiranje;\n"
-"\n"
-" * Za ostale jezike podrazumijeva se Unicode;\n"
-"\n"
-" * Ako je potrebno dva ili više jezika koji ne koriste isto kodiranje, "
-"Unicode\n"
-"će se koristiti za čitav sistem;\n"
-"\n"
-" * Konačno, Unicode može biti nametnut sistemu ako korisnik to odluči\n"
-"izborom opcije \"%s\" bez obzira na izabrane jezike.\n"
-"n\n"
-"Obratite pažnju da niste ograničeni na samo jedan dodatni jezik. Možete\n"
-"ih izabrati nekoliko ili čak ih instalirati sve klikom na polje \"%s\".\n"
-"Vaš izbor podrške za neki jezik označava da će biti instaliran prijevod,\n"
-"fontovi, pravila za provjeru pravopisa itd. za taj jezik.n\n"
-"\n"
-"Da biste izabrali između raznih jezika instaliranih na vašem sistemu, "
-"možete\n"
-"pokrenuti kao \"root\" naredbu \"localedrake\", čime mijenjate\n"
-"jezik koji koristi čitav sistem. Izvršavanjem te naredbe kao običan\n"
-"korisnik mijenjate jezičke postavke samo za tog konkretnog korisnika."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "Espanol"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"Obično DrakX nema problema da odredi broj dugmadi na vašem mišu.\n"
-"Ako ima, pretpostaviće da imate miš sa dva dugmeta i podesiće simulaciju\n"
-"trećeg dugmeta. Treće dugme se može postići na mišu sa dva dugmeta\n"
-"istovremenim klikom na lijevo i desno dugme miša. DrakX će automatski\n"
-"znati da li miš koristi PS/2, serijski ili USB interfejs.\n"
-"\n"
-"Ako imate miš sa tri dugmeta bez točkića, možete izabrati tip miša pod\n"
-"imenom \"%s\". DrakX će zatim konfigurisati vašeg miša tako da može\n"
-"simulirati rad točkića trećim dugmetom. Da biste ovo postigli, držite\n"
-"srednje dugme miša i pomjerajte ga gore-dolje.\n"
-"\n"
-"Ako iz nekog razloga želite navesti drugačiji tip miša, izaberite ga sa\n"
-"ponuđene liste.\n"
-"\n"
-"Možete izabrati stavku \"%s\" da izaberete ``opšti'' tip miša koji bi\n"
-"trebao raditi sa skoro svim miševima.\n"
-"Ako izaberete miš različit od ponuđenog, biće prikazan testni ekran.\n"
-"Koristite miš i točkić da potvrdite da su postavke tačne i da miš radi\n"
-"ispravno. Ako miš ne radi kako treba, pritisnite razmaknicu ili tipku Enter\n"
-"da prekinete test i vratite se na listu izbora.\n"
-"\n"
-"Miševi sa točkićem često nisu prepoznati automatski, stoga trebate izabrati\n"
-"miš na listi. Pazite da izaberete odgovarajući port na koji je vaš miš\n"
-"priključen. Nakon izbora miša i pritiska na dugme \"%s\", na ekranu će\n"
-"biti prikazana slika miša. Pomjerajte točkić miša kako biste provjerili da "
-"li\n"
-"ispravno funkcioniše. Kada vidite da se točkić na ekranu pomjera onako\n"
-"kako vi vrtite stvarni točkić, provjerite dugmad i provjerite da li se "
-"pokazivač\n"
-"na ekranu pomjera onako kako vi pomjerate miš."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "sa simulacijom točkića"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Univerzalni | Bilo koji PS/2 ili USB miš"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Molim izaberite ispravan port. Na primjer, \"COM1\" port pod Windows\n"
-"operativnim sistemom, pod GNU/Linuxom se zove \"ttyS0\" ."
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Ovo je najvažnija odluka za sigurnost vašeg GNU/Linux sistema: trebate\n"
-"unijeti \"root\" šifru, \"Root\" je sistemski administrator i jedini\n"
-"korisnik kojem je dozvoljeno da updatuje sistem, dodaje druge korisnike,\n"
-"mijenja konfiguraciju sistema itd. Ukratko, \"root\" može raditi sve! Stoga\n"
-"trebate izabrati šifru koju je teško pogoditi - DrakX će vam reći da li je "
-"šifra\n"
-"koju ste odabrali prejednostavna. Kao što možete vidjeti, niste prisiljeni "
-"da\n"
-"unesete šifru, ali vam savjetujemo da to uradite. GNU/Linux je podložan\n"
-"operatorskim greškama kao i bilo koji drugi operativni sistem. Pošto\n"
-"\"root\" može prevazići sva ograničenja i nenamjerno pobrisati sve podatke\n"
-"na particijama neoprezno im pristupajući, važno je da je teško postati \"root"
-"\".\n"
-"\n"
-"Šifra treba biti kombinacija alfanumeričkih znakova i biti barem 8 znakova\n"
-"duga. Nikad ne zapisujte \"root\" šifru -- time vaš sistem postaje lagano\n"
-"kompromitovati.\n"
-"\n"
-"Jedan izuzetak: ne dozvolite da šifra bude preduga ili prekomplikovana\n"
-"pošto ćete je morati zapamtiti!\n"
-"\n"
-"Šifra neće biti prikazana na ekranu dok je unosite. Da bismo smanjili\n"
-"mogućnost greške zbog kucanja naslijepo, moraćete unijeti šifru dva puta.\n"
-"Ako nekim slučajem ponovite istu grešku dva puta, ovu ''neispravnu'' šifru\n"
-"trebate koristiti prilikom prve prijave kao \"root\".\n"
-"\n"
-"Ako želite da pristup ovom računaru bude kontroliran pomoću servera za\n"
-"provjeru identiteta (authentication), kliknite na dugme \"%s\".\n"
-"\n"
-"Ako vaša mreža koristi LDAP, NIS ili PDC Windows domen servise za\n"
-"provjeru identiteta, izaberite odgovarajući kao \"%s\". Ako ne znate koji\n"
-"koristiti, pitajte vašeg mrežnog administratora.\n"
-"\n"
-"Ako imate problema sa pamćenjem šifara, ako vaš računar neće biti spojen\n"
-"na Internet i ako apsolutno vjerujete svakome ko mu ima fizički pristup,\n"
-"možete izabrati opciju \"%s\"."
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "provjera autentičnosti"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"\"Boot loader\" je mali program koji se pokreće prilikom paljenja računara.\n"
-"On je odgovoran za izbor i pokretanje operativnog sistema. Faza izbora boot\n"
-"loadera je obično automatizovana. DrakX će analizirati boot sektor diska i\n"
-"postupati u skladu s onim što zatekne tamo:\n"
-"\n"
-" * ako pronađe Windows boot sektor, biće zamijenjen sa GRUB/LILO boot\n"
-"sektorom. Na ovaj način bićete u mogućnosti da učitate ili GNU/Linux ili\n"
-"neki drugi OS koji je instaliran na vašem računaru.\n"
-"\n"
-" * ako pronađe GRUB ili LILO boot sektor, zamijeniće ga novim.\n"
-"\n"
-"Ako ne može donijeti odluku, DrakX će vas pitati gdje da postavi\n"
-"bootloader. Generalno, \"%s\" je najsigurnije mjesto. Birajući \"%s\"\n"
-"izbjeći ćete instalaciju bootloadera. Koristite ovu opciju samo ako znate\n"
-"šta radite."
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Sada je vrijeme da izaberete sistem štampe za vaš računar. Drugi\n"
-"operativni sistemi vam možda nude jedan, ali Mandriva Linux nudi\n"
-"dva. Svaki od ovih sistema je najbolji za određenu vrstu konfiguracije.\n"
-"\n"
-"* \"%s\" -- skraćeno za ``štampaj i nemoj stavljati u red'' (print, do not\n"
-"queue) je najbolji izbor ako imate direktnu vezu na štampač, želite izlaz\n"
-"za paniku u slučajevima zaglavljivanja papira i nemate mrežne štampače.\n"
-"(\"%s\" može riješiti samo vrlo jednostavne mrežne slučajeve i pomalo je\n"
-"spor kada se koristi sa mrežama.) Preporučujemo da koristite \"pdq\" ako\n"
-"je ovo vaše prvo iskustvo sa GNU/Linuxom.\n"
-"\n"
-"* \"%s\" znači ``Common UNIX Printing System'' (uobičajeni UNIX sistem "
-"štampe)\n"
-"je odličan izbor za štampanje na štampač koji se nalazi lokalno ili s druge\n"
-"strane planete. Vrlo ga je jednostavno podesiti i može služiti kao server "
-"ili\n"
-"klijent za prastari \"lpd\" sistem štampe, tako da je kompatibilan sa "
-"starijim\n"
-"operativnim sistemima kojima možda još trebaju usluge štampanja. Mada je\n"
-"vrlo moćan, osnovno podešavanje je skoro jednako lagano kao za \"pdq\".\n"
-"Ako želite simulirati \"lpd\" server, provjerite da li ste pokrenuli \"cups-"
-"lpd\"\n"
-"servis. \"%s\" uključuje grafičke alate za štampanje ili izbor opcija "
-"štampača,\n"
-"te za upravljanje štampačem.\n"
-"\n"
-"Ako sada napravite izbor, pa kasnije zaključite da vam se ne sviđa izabrani\n"
-"sistem štampe, možete ga promijeniti pokretanjem PrinterDrake iz\n"
-"Mandriva Linux Kontrolnog centra i klikanjem na dugme \"%s\"."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Ekspert"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX će najprije potražiti sve IDE uređaje prisutne na vašem računaru.\n"
-"Također će pretražiti sistem za jednu ili više PCI SCSI kartica. Ako\n"
-"SCSI kartica bude pronađena, DrakX će automatski instalirati odgovarajući\n"
-"drajver.\n"
-"\n"
-"Budući da pronalaženje hardware-a nikad nije savršeno, DrakX možda neće\n"
-"pronaći vaše hard diskove. Ako se to desi, moraćete ih navesti ručno.\n"
-"\n"
-"Ako je potrebno da ručno odaberete PCI SCSI adapter, DrakX će vas pitati\n"
-"da li želite navesti neke opcije za njega. Trebate dopustiti DrakXu da\n"
-"ispita hardware za neke opcije specifične za tu karticu. Obično DrakX "
-"prolazi\n"
-"kroz ovaj korak bez problema.\n"
-"\n"
-"Ako DrakX ne može ispitati opcije koje trebaju biti proslijeđene, moraćete\n"
-"ručno navesti opcije za drajver."
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\": ako je na vašem sistemu otkrivena zvučna kartica, ona će\n"
-"biti prikazana ovdje. Ako primijetite da prikazana zvučna kartica nije ona\n"
-"koja je ustvari dio vašeg sistema, možete kliknuti na dugme i odabrati neki\n"
-"drugi drajver."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Zvučna kartica"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"DrakX će vam pružiti sažetak raznih informacija koje su prikupljene\n"
-"o vašem sistemu. Ovisno o instaliranom hardveru, vjerovatno imate\n"
-"neke ili sve od navedenih stavki. Pojedinačna stavka se sastoji od\n"
-"onoga što je potrebno podesiti, nakon čega slijedi kraći sažetak trenutne\n"
-"konfiguracije. Da biste ovo izmijenili, kliknite na odgovarajuće dugme \"%s"
-"\".\n"
-"\n"
-"* \"%s\": provjerite trenutnu mapu tastature i izmijenite je ako je\n"
-" potrebno.\n"
-"\n"
-"* \"%s\": provjerite trenutno izabranu državu. Ako se nalazite negdje\n"
-"drugo, kliknite na dugme \"%s\" i izaberite neku drugu. Ako se vaša\n"
-"zemlja ne nalazi na prikazanoj listi, kliknite na dugme \"%s\" da biste\n"
-"dobili cjelokupnu listu zemalja.\n"
-"\n"
-"* \"%s\": DrakX automatski određuje vašu vremensku zonu\n"
-"na osnovu države koju ste izabrali. Možete kliknuti na dugme \"%s\"\n"
-"ako ovo nije ispravno.\n"
-"\n"
-"* \"%s\": provjerite trenutnu konfiguraciju miša i klinite na dugme da je\n"
-"promijenite ako je to potrebno.\"\n"
-"\n"
-"* \"%s\": klikanjem na dugme \"%s\" otvoriće se čarobnjak za\n"
-"podešavanje štampača. Pogledajte odgovarajuće poglavlje ''Vodiča za\n"
-"početnike'' za više informacija o podešavanju novog štampača. Interfejs\n"
-"koji je prikazan u našem priručniku je sličan onom koji će biti korišten "
-"tokom instalacije.\n"
-"\n"
-"* \"%s\": ako je na vašem sistemu otkrivena zvučna kartica, ona će\n"
-"biti prikazana ovdje. Ako primjetite da prikazana zvučna kartica nije ona\n"
-"koja je ustvari dio vašeg sistema, možete kliknuti na dugme i odabrati neki\n"
-"drugi drajver.\n"
-"\n"
-"* \"%s\": ako je na vašem sistemu prepoznata TV kartica, biće\n"
-"prikazana ovdje. Ako imate TV karticu koja nije prepoznata, kliknite na\n"
-"dugme \"%s\" kako biste pokušali podesiti je ručno.\n"
-"\n"
-" * \"%s\": možete kliknuti na \"%s\" da promijenite parametre pridružene\n"
-"kartici ako mislite da je konfiguracija neispravna.\n"
-"\n"
-"* \"%s\": DrakX će podesiti vaš grafički interfejs za rad na\n"
-"rezoluciji \"800x600\" ili \"1024x768\". Ako vam to ne odgovara, kliknite\n"
-"na dugme \"%s\" kako biste drugačije podesili vaš interfejs.\n"
-"\n"
-"* \"%s\": ako želite, možete podesiti vaš Internet pristup ili pristup\n"
-"lokalnoj mreži. Pogledajte štampanu dokumentaciju ili koristite\n"
-"Mandriva Linux Kontrolni centar nakon što je završena instalacija\n"
-"kako biste koristili ugrađenu pomoć. \n"
-" * \"%s\": omogućuje vam da podesite adrese HTTP i FTP proxyja ako\n"
-"se računar na koji instalirate nalazi iza proxy servera.\n"
-"\n"
-"* \"%s\": ovdje možete promijeniti nivo sigurnosti sistema koji\n"
-"je podešen u prethodnom koraku ().\n"
-"\n"
-"* \"%s\": ako planirate povezati vaš računar na Internet, pametno je\n"
-"zaštititi ga od upada postavljanjem firewalla. Pogledajte odgovarajuće\n"
-"poglavlje ''Vodiča za početnike'' za detalje o podešavanju firewalla.\n"
-"\n"
-"* \"%s\": ako želite promijeniti postavke bootloadera, kliknite na to\n"
-"dugme. Ovo bi trebalo biti rezervisano za napredne korisnike. Pogledajte\n"
-"štampanu dokumentaciju ili pomoć za bootloader konfiguraciju uključenu\n"
-"u Mandriva Linux Kontrolni centar.\n"
-"\n"
-"* \"%s\": ovdje možete fino podešavati koji servisi će biti pokrenuti\n"
-"na vašem računaru. Ako planirate koristiti ovaj računar kao server,\n"
-"dobra je ideja još jednom pregledati ove postavke."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Vremenska zona"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "TV kartica"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "ISDN kartica"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Grafički interfejs"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Mreža"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Proxy-ji"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Sigurnosni nivo"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Firewall"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Bootloader"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Servisi"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Izaberite hard disk koji želite obrisati kako biste instalirali vašu novu\n"
-"Mandriva Linux particiju. Budite pažljivi, svi podaci koji se nalaze na\n"
-"njemu će biti izgubljeni i neće se moći vratiti!"
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Kliknite na \"%s\" ako želite obrisati sve podatke i particije koje\n"
-"su prisutne na ovom hard disku. Budite oprezni, jer nakon klikanja na\n"
-"\"%s\" nećete moći vratiti podatke i particije koji se trenutno nalaze\n"
-"na ovom hard disku, uključujući i sve Windows podatke.\n"
-"\n"
-"Kliknite na \"%s\" da prekinete ovu operaciju bez gubitka\n"
-"podataka i particija na ovom hard disku."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Dalje ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Nazad"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ne mogu pristupiti kernelskim modulima koji odgovaraju vašem kernelu "
-"(nedostaje datoteka %s), što obično znači da je vaša boot disketa zastarjela "
-"u odnosu na instalacioni medij (napravite noviju boot disketu)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Morate takođe formatirati i %s"
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Imate li neke dodatne medije?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-"Sljedeći mediji su pronađeni i biće korišteni prilikom instalacije: %s.\n"
-"\n"
-"\n"
-"Želite li podesiti ijedan dodatni instalacioni medij?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "sa CDROMa"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "Mreža (http)"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "Mreža (ftp)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "Ubacite ponovo CD 1"
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Nije pronađen nijedan uređaj"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "Ubacite CD"
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Ne mogu demontirati CD-ROM"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "URL mirrora?"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Ne mogu pronaći hdlist datoteku na ovom mirroru"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Promijenite vaš CD-ROM!\n"
-"Molim ubacite CD označen sa \"%s\" u vaš CD-ROM uređaj i pritisnite \"U redu"
-"\" kad ste spremni."
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr "Kopiranje u toku"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Izabrali ste sljedeći server (servere): %s\n"
-"\n"
-"\n"
-"Ovi serveri su aktivirani automatski. Oni nemaju nikakvih poznatih "
-"sigurnosnih\n"
-"problema, ali možda će biti pronađeni u budućnosti. Ako se to desi, morate "
-"ih\n"
-"upgrade-ovati što prije bude moguće.\n"
-"\n"
-"\n"
-"Da li zaista želite instalirati ove servere?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Da bi se omogućilo unaprjeđenje vašeg sistema, biće uklonjeni sljedeći "
-"paketi: %s\n"
-"\n"
-"\n"
-"Želite li zaista deinstalirati ove pakete?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Greška u čitanju datoteke %s"
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Sljedeći diskovi su preimenovani:"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr "%s (ranije pod imenom %s)"
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Došlo je do greške - nije pronađen nijedan ispravan uređaj na kojem se mogu "
-"kreirati novi file sistemi. Molim provjerite vaš hardware i pronađite uzrok "
-"greške"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr "Molim izaberite medij"
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr "Neispravan medij %s"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Datoteka već postoji. Želite li pisati preko nje?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Ne mogu napraviti snimak ekrana prije particioniranja"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Snimanje ekrana će biti dostupno nakon što instalirate u %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Instalacija sistema"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Podešavanje sistema"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Neki dio hardware-a na vašem računaru zahtjeva ``vlasničke'' drajvere za "
-"rad.\n"
-"Možete naći više podataka o njima na: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Morate imati root particiju.\n"
-"Za ovo, napravite jednu particiju (ili kliknite na neku od postojećih).\n"
-"Zatim izaberite opciju ``Tačka montiranja'' i postavite je na `/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemate nijednu swap particiju\n"
-"\n"
-"Svejedno nastavi?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Morate imati FAT particiju montiranu na /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nema dovoljno slobodnog prostora za pravljenje novih particija"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Koristi postojeću particiju"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Nema nijedne postojeće particije za upotrebu"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Koristi Windows particiju za loopback"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Koju particiju želite koristiti za Linux4Win?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Izaberite veličine"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Veličina root particije u MB:"
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Veličina swap particije u MB:"
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za upotrebu kao loopback (ili nije ostalo "
-"dovoljno prostora)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Kojoj particiji želite promijeniti veličinu?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"FAT resizer ne može izmijeniti vašu particiju, \n"
-"došlo je do sljedeće greške: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Izračunavam veličinu Windows particije"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Vaša Windows particija je previše fragmentirana. Molim restartujte vaš "
-"računar pod Windows-om, pokrenite ``defrag'' alat, zatim pokrenite Mandriva "
-"Linux instalaciju."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"UPOZORENJE!\n"
-"\n"
-"DrakX će sada promijeniti veličinu vaše Windows particije. Budite pažljivi,\n"
-"ova operacija je opasna. Ako to već niste uradili, najprije napustite\n"
-"instalaciju, izvršite naredbu \"chkdsk c:\" iz Command Prompt-a pod\n"
-"Windowsom (obratite pažnju da izvršavanje grafičkog programa \"scandisk\"\n"
-"nije dovoljno, trebate koristiti \"chkdsk\" u komandnom upitu!), opcionalno\n"
-"pokrenite \"defrag\", zatim ponovo pokrenite instalaciju. Također biste\n"
-"trebali spasiti sve podatke.\n"
-"Kada ste sigurni, kliknite na \"U redu\"."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Koju veličinu želite da sačuvate za Windows na"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "particiji %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Smanjujem Windows particiju"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Smanjivanje FAT particije nije uspjelo: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Ne postoji nijedna FAT particija za promjenu veličine (ili nije ostalo "
-"dovoljno prostora)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Ukloni Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Imate više od jednog hard diska. Na koji od njih želite instalirati Linux?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SVE postojeće particije i podaci na njima će biti izgubljeni na disku %s"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Koristi fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Sada možete particionirati %s.\n"
-"Kada završite, ne zaboravite spasiti sa `w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Ne mogu naći dovoljno prostora za instalaciju"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX Particioni čarobnjak je našao sljedeća rješenja:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Particioniranje nije uspjelo: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Pokrećem mrežu"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Zaustavljam mrežu"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n"
-"provjeru prevedenog teksta, tekst licence je ostavljen u originalnom "
-"(engleskom)\n"
-"obliku.\n"
-"\n"
-"\n"
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"Upozorenje: Slobodan softver ne mora obavezno biti slobodan od patenata\n"
-"i neki elementi slobodnog softvera mogu biti obuhvaćeni patentima u vašoj\n"
-"zemlji. Npr. MP3 dekoderi koji su uključeni možda zahtijevaju licencu za "
-"daljnje\n"
-"korištenje (za više detalja, pogledajte http://www.mp3licensing.com). Ako "
-"niste\n"
-"sigurni da li se patent odnosi na vas, provjerite vaše lokalne zakone."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Pažnja\n"
-"\n"
-"Molim pročitajte pažljivo uslove licence ispod. Ako se ne slažete sa bilo\n"
-"kojim dijelom, nije vam dozvoljeno da instalirate naredne CD medije. "
-"Pritisnite\n"
-"dugme 'Ne prihvatam' da biste nastavili sa instalacijom bez korištenja ovih "
-"medija.\n"
-"Budući da prevodilac ovog teksta nije u mogućnosti da osigura pravnu\n"
-"provjeru prevedenog teksta, tekst je ostavljen u originalnom (engleskom)\n"
-"obliku.\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Čestitamo, instalacija je završena.\n"
-"Uklonite boot medij i pritisnite Enter da restartujete računar.\n"
-"\n"
-"\n"
-"Za informacije o ispravkama koje su dostupne za ovu verziju Mandriva "
-"Linuxa,\n"
-"pogledajte Errata koja je dostupna na:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Informacije o podešavanju vašeg sistema su dostupne u poglavlju\n"
-"\"Nakon instalacije\" vašeg zvaničnog Mandriva Linux Priručnika za upotrebu."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Dvostruka tačka montiranja %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Neki bitni paketi nisu ispravno instalirani.\n"
-"Ili je neispravan vaš cdrom uređaj ili vaš cdrom medij.\n"
-"Provjerite cdrom na instaliranom računaru koristeći \"rpm -qpl media/main/*."
-"rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Prelazim na korak `%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Izbor grupe paketa"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ukupna veličina: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Neispravan paket"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Verzija: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Veličina: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Značaj: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Ne možete izabrati/isključiti ovaj paket"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "zbog nedostajućeg %s"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "zbog nezadovoljenog %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "pokušavam promovirati %s"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "kako biste zadržali %s"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr "Ne možete izabrati ovaj paket jer nema dovoljno prostora za njega"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Sljedeći paketi će biti instalirani"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Sljedeći paketi će biti uklonjeni"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Ovo je obavezan paket, ne može biti isključen"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Ne možete isključiti ovaj paket. On je već instaliran"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ovaj paket mora biti unaprijeđen\n"
-"Jeste li sigurni da ga želite isključiti?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Ne možete isključiti ovaj paket. On mora biti unaprijeđen"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Automatski prikaži izabrane pakete"
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "Izbor za čitanje/snimanje"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Osvježavam izbor paketa"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Minimalna instalacija"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Izaberite pakete koje želite instalirati"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Instaliram"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Procjenjujem"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Sakrij detalje"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Preostalo vremena "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Molim sačekajte, pripremam instalaciju..."
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d paketa"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaliram paket %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Ne prihvatam"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Promijenite vaš CD-ROM!\n"
-"Molim ubacite CD označen sa \"%s\" u vaš CD-ROM uređaj i pritisnite \"U redu"
-"\" kad ste spremni.\n"
-"Ako ga nemate, pritisnite \"Odustani\" da preskočite instalaciju sa tog CD-"
-"ROMa."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Došlo je do greške pri naručivanju paketa:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Svejedno nastavi?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Došlo je do greške kod instaliranja paketa:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "nije podešeno"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-"Pronađeni su sljedeći instalacioni mediji.\n"
-"Ako želite preskočiti neke od njih, možete ih isključiti sada."
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-"Imate mogućnost da kopirate sadržaj CDova na hard disk prije instalacije.\n"
-"Zatim će instalacija biti nastavljena sa hard diska, a paketi će ostati "
-"dostupni nakon što sistem bude instaliran."
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr "Kopiraj čitave CDove"
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Licencni ugovor"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr "Napomene izdanja"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Molim izaberite izgled vaše tastature."
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Ovdje je puna lista svih dostupnih tastatura"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Instaliraj/Unaprijedi"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Da li je ovo instalacija ili unaprjeđenje?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Unaprijedi %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Ključ enkripcije za %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Molim izaberite vrstu vašeg miša."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Port miša"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Molim izaberite na kojem serijskom portu je spojen vaš miš."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Emulacija dugmeta"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulacija 2 dugmeta"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulacija 3 dugmeta"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Podešavam PCMCIA kartice..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Podešavam IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "Nema dostupnih particija"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Pretražujem particije da nađem tačke montiranja"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Izaberite tačke montiranja"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nema dovoljno slobodnog prostora za 1 MB bootstrap! Instalacija će "
-"nastaviti, ali da biste bootali vaš sistem, morate kreirati bootstrap "
-"particiju u DiskDrake-u"
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Trebate napraviti PPC PReP Boot bootstrap! Instalacija će nastaviti, ali da "
-"biste bootali vaš sistem, morate kreirati bootstrap particiju u DiskDrake-u"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Izaberite particije koje želite formatirati"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Provjeri loše blokove?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Nisam uspio provjeriti datotečni sistem %s. Želite li popraviti greške? "
-"(pažnja, možete izgubiti podatke)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nemam dovoljno swap prostora da dovršim instalaciju, molim dodajte još"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Tražim dostupne pakete i izgrađujem rpm bazu podataka..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Tražim dostupne pakete..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Tražim već instalirane pakete..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Pronalazim pakete za unaprjeđenje..."
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Izaberite mirror sa kojeg će biti dobavljeni paketi"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Vaš sistem nema dovoljno preostalog prostora za instalaciju ili unaprjeđenje "
-"(%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Molim izaberite da li ćete učitati ili snimiti izbor paketa.\n"
-"Format je isti kao i diskete koje generiše auto_install."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Učitaj"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Snimi"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "Neispravna datoteka"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Izabrana veličina je veća od slobodnog prostora"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Vrsta instalacije"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Niste izabrali nijednu grupu paketa\n"
-"Molim izaberite minimalnu instalaciju koju želite:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Sa osnovnom dokumentacijom (preporučeno)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Stvarno minimalna instalacija (posebno bez urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Svi"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ako imate sve CDe na listi, kliknite na U redu.\n"
-"Ako nemate nijedan od ovih CDova, kliknite na Odustani.\n"
-"Ako nedostaju samo neki CDovi, isključite ih, zatim kliknite na U redu."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM pod oznakom \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Pripremam instalaciju"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaliram paket %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Post-instalacijsko podešavanje"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"Sada imate mogućnost da dobavite sa Interneta nove verzije paketa koji\n"
-"su izašli nakon što je distribucija objavljena. Među njima su sigurnosne "
-"zakrpe\n"
-"i ispravke bugova.\n"
-"\n"
-"Da biste izvršili download, potrebno je da podesite Internet konekciju.\n"
-"\n"
-"Da li želite instalirati update-ovane pakete ?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontaktiram mirror da bih saznao listu dostupnih paketa..."
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ne mogu pristupiti mirroru %s"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Želite li ponovo pokušati?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Koja je vaša vremenska zona?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatska sinhronizacija vremena (koristeći NTP)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP server"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Ukratko"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Sistem"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Hardware"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Udaljeni CUPS server"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Nema štampača"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Imate li ISA zvučnu karticu?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Pokrenite \"alsaconf\" ili \"sndconfig\" poslije instalacije kako biste "
-"podesili vašu zvučnu karticu"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nije otkrivena zvučna kartica. Probajte \"harddrake\" poslije instalacije"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Grafički interfejs"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Mreža i Internet"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "podešeno"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Sigurnost"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "aktiviran"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "isključen"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Boot"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s na %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Servisi: %d aktiviran za %d registrovan"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Niste podesili X. Sigurno želite uraditi ovo?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Pripremam bootloader..."
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Izgleda da imate OldWorld ili Unknown računar, yaboot bootloader neće raditi "
-"kod vas. Instalacija će se nastaviti, ali ćete morati koristiti BootX ili "
-"neki drugi način za bootanje vašeg računara. Argument kernela za root fs je: "
-"root=%s"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Da li želite koristiti aboot?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Greška u instaliranju aboota, \n"
-"da li da pokušam nasilnu instalaciju čak i ako to uništi prvu particiju?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"Na ovom sigurnosnom nivou, pristup datotekama na Windows particijama je "
-"dozvoljen samo administratoru."
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Ubacite praznu disketu u jedinicu %s"
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Molim ubacite sljedeću disketu za drajvere"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Pravim auto instalacijsku disketu..."
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Neki koraci nisu dovršeni.\n"
-"\n"
-"Da li zaista želite izaći sada?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Napravi autoinstalacijsku disketu"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Ova auto instalacija može biti potpuno automatizovana ako želite,\n"
-"u kojem slučaju će ona preuzeti hard disk!!\n"
-"(ovo je namjenjeno za instaliranje na drugi računar).\n"
-"\n"
-"Možda ćete radije željeti ponoviti instalaciju.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> između elemenata  | <Space> vrši izbor | <F12> idući ekran "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Izaberi datoteku"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Dodaj"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Izmijeni"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Pobriši"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Manje opcija"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Kraj"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Uradi"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Pogrešan izbor, pokušajte ponovo\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vaš izbor? (podrazumjevano %s)"
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Stavke koje morate popuniti:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Vaš izbor? (0/1, podrazumjevano %s)"
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Dugme '%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Da li želite kliknuti na ovo dugme?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Vaš izbor? (podrazumjevano '%s' %s)"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr " unesite `void' za prazan unos"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Postoji mnogo stvari od kojih možete izabrati (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Molim unesite prvi broj od deset koji želite izmjeniti,\n"
-"ili samo pritisnite Enter za nastavak.\n"
-"Vaš izbor?"
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Primjetite, natpis je promijenjen:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Ponovo pošalji"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Češka (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Njemačka"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Španska"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Finska"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Francuska"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norveška"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Poljska"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Ruska"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Švedska"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "UK tastatura"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "US tastatura"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albanska"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Armenska (stara)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Armenska (pisaća mašina)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Armenska (fonetska)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Arapska"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Azerbejdžanska (latinica)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belgijska"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bengalska (Inscript raspored)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bengalska (Probhat raspored)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bugarska (fonetska)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bugarska (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brazilska (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosanska"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Bjeloruska"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Švicarska (njemački raspored)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Švicarska (francuski raspored)"
-
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Cherokee syllabics"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Češka (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Njemačka (bez mrtvih tipki)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanagari"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Danska"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Esperanto)"
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Francuska)"
-
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (UK)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Norveška)"
-
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (Poljska)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (Švedska)"
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Dzongkha/Tibetanska"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estonska"
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Farska"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Gruzijska (\"ruski\" raspored)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Gruzijska (\"latinični\" raspored)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Grčka"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Grčka (politonska)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Gujarati"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Gurmukhi"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Hrvatska"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Mađarska"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Irska"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Izraelska"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Izraelska (fonetska)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Iranska"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Islandska"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Italijanska"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Inuktitut"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Japanska 106 tipki"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kannada"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Korejanska"
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Kurdska (arapsko pismo)"
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Kirgiška"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Latino-Američka"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laoska"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Litvanska AZERTY (stara)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Litvanska AZERTY (nova)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Litvanska \"red brojeva\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanska \"fonetska\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Latvijska"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malayalam"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Makedonska"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Mjanmarska (Burmanska)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongolska (ćirilica)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Malteška (UK)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Malteška (US)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Holandska"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Oriya"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Poljska (QWERTY)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Poljska (QWERTZ)"
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Pashto"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portugalska"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Kanadska (Kvebek)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Rumunska (QWERTZ)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Rumunska (QWERTY)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Ruska (fonetska)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Saami (norveška)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Saami (švedska/finska)"
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Sindhi"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Slovenačka"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slovačka (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slovačka (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Srpska (ćirilica)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Sirijska"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Sirijska (fonetska)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telugu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamilska (ISCII raspored)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamilska (pisaća mašina)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Tajlandska (Kedmanee)"
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Tajlandska (TIS-820)"
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Tajlandska (Pattachote)"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Tadžička"
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Turkmenska"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Turska (tradicionalni \"F\" model)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Turska (moderni \"Q\" model)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ukrajinska"
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Urdu tastatura"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US tastatura (međunarodna)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Uzbečka (ćirilica)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Vijetnamska \"red brojeva\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Jugoslavenska (latinična)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Desna Alt tipka"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Obje Shift tipke istovremeno"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control i Shift tipka istovremeno"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock tipka"
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Shift i CapsLock tipke istovremeno"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl i Alt tipke istovremeno"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt i Shift tipke istovremeno"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Meni\" tipka"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Lijeva \"Windows\" tipka"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Desna \"Windows\" tipka"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Obje Control tipke istovremeno"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Obje Alt tipke istovremeno"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Lijeva Shift tipka"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Desna Shift tipka"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Lijeva Alt tipka"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Lijeva Control tipka"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Desna Control tipka"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Ovdje možete izabrati tipku ili kombinaciju tipki koja će\n"
-"izvršiti prebacivanje između raznih rasporeda tastature\n"
-"(npr: latinični i ne-latinični)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"Ova postavka će biti aktivirana nakon instalacije.\n"
-"Tokom instalacije, trebate koristiti desnu Control\n"
-"tipku da prebacujete između raznih rasporeda tastature."
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andora"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Ujedinjeni Arapski Emirati"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua i Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albanija"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Armenija"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nizozemski Antili"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antarktik"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Argentina"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Američka Samoa"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbejdžan"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosna i Hercegovina"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbados"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladeš"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bugarska"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Bahrein"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benin"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Bruneji"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivija"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahami"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Butan"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Ostrvo Bouvet"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Bocvana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Bjelorusija"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Belize"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosova ostrva"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Centralnoafrička Republika"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Obala Slonovače"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Cook ostrva"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Čile"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Kina"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbija"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Srbija i Crna Gora"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Kuba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Zelenortska ostrva"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Uskršnje ostrvo"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Kipar"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Džibuti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominika"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanska Republika"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Alžir"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Egipat"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Zapadna Sahara"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritreja"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Etiopija"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fidži"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandsko otočje"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Farska ostrva"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gabon"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Ujedinjeno Kraljevstvo"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenada"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Gruzija"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Francuska Gvajana"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Gana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Grenland"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gambija"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Gvineja"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Gvadalupe"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatorijalna Gvineja"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia i South Sandwich ostrva"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Gvatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Guam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Gvineja Bisau"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Gvajana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Kina (Hong Kong)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard ostrvo i McDonaldova ostrva"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Hrvatska"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haiti"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonezija"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Indija"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britansko-Indijska morska teritorija"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Irak"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Iran"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Island"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamajka"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Jordan"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenija"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgistan"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Kambođa"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Komori"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts and Nevis"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Koreja (Sjeverna)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Koreja"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kuvajt"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmanska ostrva"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazahstan"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Liban"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Lihtenštajn"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Šri Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Liberija"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Litvanija"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Luksemburg"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Latvija"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Libija"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Maroko"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monako"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldova"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Maršalova ostrva"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Makedonija"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongolija"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Sjeverna Marijanska ostrva"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martinik"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Mauritanija"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malta"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Mauricijus"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Maldivi"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malavi"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Meksiko"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malezija"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mozambik"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibija"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Nova Kaledonija"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Niger"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk ostrvo"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nigerija"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragva"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepal"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauru"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Oman"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panama"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Peru"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Francuska Polinezija"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nova Gvineja"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Filipini"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre and Miquelon"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Portoriko"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paragvaj"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palau"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Katar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Reunion"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Rumunija"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudijska Arabija"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Solomonska ostrva"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Sejšelska ostrva"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sudan"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapur"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Slovenija"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen ostrva"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senegal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somalija"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Surinam"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome i Principe"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Sirija"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Svazilend"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks i Caicos ostrva"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Čad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "Francuske Južne Teritorije"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tadžikistan"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Istočni Timor"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunis"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tonga"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Turska"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad i Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzanija"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ukrajina"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Uganda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Urugvaj"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent and the Grenadines"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venecuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Djevičanska ostrva (Britanska)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Djevičanska ostrva (SAD)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Vijetnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis i Futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoa"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Jemen"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zambija"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabve"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "Trebate instalirati sljedeće pakete: %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Dobro došli u %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Kružno montiranje %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Najprije ukloni logičke volumene\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Parametri"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "NIŠTA"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Podešavanje modula"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Ovdje možete podesiti svaki parametar modula."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Pronađeno %s interfejsa"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Imate li neki drugi?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Imate li ijedan %s interfejs?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Pogledaj hardware info"
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr "Instaliram drajver za USB kontroler"
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Instaliram drajver za firewire kontroler %s"
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Instaliram drajver za hard disk kontroler %s"
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Instaliram drajver za Ethernet kontroler %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaliram drajver za %s karticu %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sada možete navesti opcije za modul %s.\n"
-"Obratite pažnju da adrese trebate unositi sa prefiksom 0x kao npr. '0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sada možete navesti opcije za modul %s. Opcije su u formatu ``ime=vrijednost "
-"ime2=vrijednost2 ...''.\n"
-"Na primjer, ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Opcije modula"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Koji %s drajver ću pokušati?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"U nekim slučajevima, %s drajver treba imati dodatne informacije za\n"
-"ispravan rad, iako on obično radi dobro i bez njih. Želite li navesti neke\n"
-"ekstra opcije za njega ili dozvoliti drajveru da ispita vaš računar za sve\n"
-"informacije koje mu trebaju? Povremeno, ispitivanje može zaglaviti računar,\n"
-"ali ne bi trebalo izazvati nikakvu štetu."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Ispitivanje"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Navedi opcije"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Učitavanje modula %s nije uspjelo.\n"
-"Želite li probati opet sa drugim parametrima?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "broj"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d brojeva razdvojenih zarezom"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d stringova razdvojenih zarezom"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "brojevi razdvojeni zarezom"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "tekst razdvojen zarezima"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Standard"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Opšti PS2 Miš sa točkićem"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Automatski"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 dugme"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Opšti miš sa 2 dugmeta"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Opšti miš sa 3 dugmeta sa simulacijom točkića"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Sa točkićem"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "serijski"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Opšti miš sa 3 dugmeta"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan sa simulacijom točkića"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Series sa simulacijom točkića"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serijski, stari C7 tip)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Mouse (serijski, stari C7 tip) sa simulacijom točkića"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse sa simulacijom točkića"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "busmouse"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 dugmeta"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 dugmeta"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3 dugmeta sa simulacijom točkića"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Univerzalno"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Bilo koji PS/2 ili USB miš"
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "nijedan"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Bez miša"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Synaptics Touchpad"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Molim testirajte miš"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Da aktivirate miša,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "POMJERITE VAŠ TOČKIĆ!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "koristi PPPOE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "koristi PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "koristi DHCP"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - detektovan"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (koristeći PPPoA) USB"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (koristeći DHCP) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Spoji se na Internet"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"Najčešći način za konekciju sa adsl-om je pppoe.\n"
-"Neke konekcije koriste PPTP, a vrlo rijetke koriste DHCP.\n"
-"Ako ne znate, izaberite 'koristi PPPoE'"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "Vrsta ADSL veze:"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Web server"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "DNS server"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "SSH server"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "FTP server"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Mail server"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP i IMAP server"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Telnet server"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr "Windows dijeljenje datoteka (SMB)"
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "CUPS server"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Eho zahtjev (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "BitTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"drakfirewall podešavanje\n"
-"\n"
-"Podesite lični firewall na ovom Mandriva Linux računaru.\n"
-"Ako želite moćnu soluciju posebnog firewalla, molim pogledajte\n"
-"specijaliziranu Mandriva Security Firewall distribuciju."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall podešivač\n"
-"\n"
-"Prije nego što nastavite, provjerite da li ste ispravno podesili pristup\n"
-"mreži/Internetu pomoću alata drakconnect."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Kojim servisima želite dozvoliti pristup sa Interneta?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Ovdje možete unijeti razne portove. \n"
-"Primjeri ispravno unesenih portova su: 139/tcp 139/udp 600:610/tcp 600:610/"
-"udp.\n"
-"Pogledajte datoteku /etc/services za više informacija."
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Zadan je neispravan port: %s.\n"
-"Odgovarajući format je \"port/tcp\" ili \"port/udp\", \n"
-"gdje je \"port\" cijeli broj između 1 i 65535.\n"
-"\n"
-"Možete takođe zadati raspon portova (npr: 24300:24350/udp)"
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Sve (bez firewalla)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Ostali portovi"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "Nije na spisku - ručno izmijenite"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Ne znam"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Ručno"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr "Molim izaberite Windows drajver (.inf datoteka)"
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "Ručni izbor"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Interna ISDN kartica"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Ručno podešavanje"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Automatska IP (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "Automatska IP (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol za ostatak svijeta"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Evropski protokol (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol za ostatak svijeta \n"
-" bez D-kanala (iznajmljene linije)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel speedtouch USB modem"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Sagem USB modem"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Bewan modem"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "ECI Hi-Focus modem"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Dynamic Host Configuration Protocol (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Ručna TCP/IP konfiguracija"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "Point to Point Tunneling Protocol (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP over Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP over ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr "DSL preko CAPI"
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Bridged Ethernet LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Bridged Ethernet VC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "Routed IP LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "Routed IP VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Skripta"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Terminal"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Podešavanje mreže i Interneta"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(detektovan na portu %s)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(detektovan %s)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(detektovan)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "LAN veza"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Bežična veza"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL veza"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Kablovska veza"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN veza"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Modemska veza"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Izaberite vrstu veze koju želite podesiti"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Sada ćemo podesiti vezu %s.\n"
-"\n"
-"\n"
-"Pritisnite \"%s\" za nastavak."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Podešavanje konekcije"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Molim ispunite ili provjerite polje ispod"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ kartice"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memorija kartice (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "IO kartice"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 kartice"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 kartice"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Vaš lični broj telefona"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Naziv provajdera (npr. provajder.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Broj telefona provajdera"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "Provider DNS 1 (opcionalno)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "Provider DNS 2 (opcionalno)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Način biranja broja"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Brzina konekcije"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Timeout konekcije (u sek.)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Korisničko ime"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Šifra"
-
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr "Kablovski pristup: opcije računa"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr "Koristi BPALogin (potreban za Telstra ISP)"
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Izaberite mrežni interface koji želite podesiti:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Mrežni uređaj"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Vanjski ISDN modem"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Izaberite uređaj !"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Podešavanje ISDNa"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Koju vrstu kartice imate?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Ako imate ISA karticu, vrijednosti na idućem ekranu bi trebale biti "
-"ispravne.\n"
-"\n"
-"Ako imate PCMCIA karticu, moraćete znati IRQ i IO vaše kartice.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Nastavak"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Prekid"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Koja od navedenih je vaša ISDN kartica?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-"Za ovaj modem je dostupan CAPI drajver. Ovaj CAPI drajver vam može ponuditi "
-"više mogućnosti od slobodnog drajvera (npr. slanje faksova). Koji drajver "
-"želite koristiti?"
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Drajver"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Koji protokol želite koristiti?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Izaberite vašeg providera.\n"
-" Ako nije na listi, izaberite Nije na listi"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Provajder:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Vaš modem nije podržan pod ovim sistemom.\n"
-"Pogledajte http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Izaberite modem koji želite podesiti:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Molim izaberite na koji serijski port je nakačen vaš modem."
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Izaberite vašeg Internet provajdera"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Dialup: opcije računa"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Naziv konekcije"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Broj telefona"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Login ID"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "Dialup: IP parametri"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "IP parametri"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP adresa"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Subnet maska"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Dialup: DNS parametri"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Ime domena"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Prvi DNS server (opcionalno)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Drugi DNS server (opcionalno)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "Odredi hostname iz IP adrese"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Gateway"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "IP adresa gateway-a"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "Podešavanje ADSLa"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Molim izaberite vašeg ADSL provajdera"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"Potreban vam je Alcatel mikrokod.\n"
-"Možete ga sada potražiti na disketi ili vašoj Windows particiji,\n"
-"ili preskočiti ovaj korak i završiti ga kasnije."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Koristi disketu"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Koristi moju Windows particiju"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Uradi kasnije"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "Kopiranje firmware-a nije uspjelo, datoteka %s nije pronađena"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "Kopiranje firmware-a uspjelo"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Potreban vam je Alcatel-ov mikrokod.\n"
-"Možete ga downloadovati na\n"
-"%s\n"
-"zatim kopirajte mgmt.o u /usr/share/speedtouch"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "Virtual Path ID (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "Virtual Circuit ID (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "Enkapsulacija:"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"Ne možemo podržavati ECI Hi-Focus modem pošto ne smijemo distribuirati "
-"binarne drajvere.\n"
-"\n"
-"Možete naći drajver na http://eciadsl.flashtux.org/"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "Ručno učitaj drajver"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr "Koristi Windows drajver (putem ndiswrappera)"
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "Ne mogu instalirati paket %s!"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Zeroconf rezolvira hostname"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Podešavam mrežni uređaj %s (drajver %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Molim unesite IP konfiguraciju za ovaj računar.\n"
-"Svaka stavka bi trebala biti unesena kao IP adresa u decimalnoj notaciji\n"
-"razdvojenoj tačkama (npr. 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Odredi ime računara iz DHCP adrese"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "DHCP ime računara"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Otkrij id mrežne karte (korisno za laptope)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Network Hotplugging"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Pokreni na bootu"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "Metrika"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP klijent"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Timeout konekcije (u sek.)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "IP adresa DNS servera"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa treba biti u formatu 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Gateway adresa treba biti u formatu 1.2.3.4"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "Upozorenje: IP adresa %s je obično rezervisana !"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s je već u upotrebi\n"
-
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Izaberite ndiswrapper drajver"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr "Instaliraj novi drajver"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "Molimo unesite parametre bežične veze za ovu karticu:"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "Režim rada"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Ad-hoc"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Upravljano"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Glavni"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Repeater"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Sekundarni"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Auto"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Ime mreže (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "ID mreže"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "Frekvencija"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "Prag osjetljivosti"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Brzina veze (u b/s)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-"RTS/CTS dodaje proceduru potvrde prijema za svaki paket kako bi se "
-"osiguralo\n"
-"da su podaci ispravno preneseni. Ovo dodaje neiskorišteni prenos, ali može\n"
-"rezultirati boljim performansama u slučaju skrivenih čvorova ili velikog "
-"broja aktivnih\n"
-"čvorova (nodeova). Ovaj parametar podešava veličinu najmanjeg paketa za koji "
-"će\n"
-"čvor poslati RTS. Ako je vrijednost jednaka maksimalnoj veličini paketa, "
-"procedura\n"
-"je isključena. Takođe možete podesiti ovaj parametar na auto, fixed ili off."
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "Fragmentacija"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Dodatni parametri naredbe iwconfig"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-"Ovdje možete podesiti neke dodatne parametre kao što su:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick je već isti kao "
-"i hostname).\n"
-"\n"
-"Pogledajte man stranicu iwconfig(8) za dodatne informacije."
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Dodatni parametri naredbe iwspy"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-"lwspy se koristi da bi se dobila lista adresa na bežičnom interfejsu\n"
-"i kako bi se dobili podaci o kvaliteti linka za svaku od njih.\n"
-"\n"
-"Ove informacije su iste kao i one koje se nalaze u /proc/net/wireless :\n"
-"kvaliteta linka, jačina signala i nivo šuma.\n"
-"\n"
-"Pogledajte man stranicu iwspy(8) za više informacija."
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Dodatni parametri naredbe iwpriv"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-"Iwpriv omogućuje podešavanje opcionalnih (privatnih) parametara bežičnog\n"
-"mrežnog interfejsa.\n"
-"\n"
-"Iwpriv se bavi parametrima i postavkama specifičnim za svaki drajver (za "
-"razliku\n"
-"od iwconfig koji se bavi opštim parametrima).\n"
-"\n"
-"U teoriji, dokumentacija za svaki uređaj bi trebala uključivati objašenjenje "
-"tih\n"
-"posebnih naredbi i njihove efekte.\n"
-"\n"
-"Pogledajte man stranicu iwpriv(8) za daljnje informacije."
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Frekvencija bi trebala imati završetak k, M ili G (na primjer, \"2.46G\" za "
-"frekvenciju 2.46 GHz) ili dodajte odgovarajući broj nula (0)."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Brzina bi trebala imati završetak k, M ili G (na primjer, \"11M\" za 11M) "
-"ili dodajte odgovarajući broj nula (0)."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Molim unesite naziv vašeg računara ako ga znate.\n"
-"Naziv vašeg računara bi trebao biti puno-kvalifikovani naziv,\n"
-"kao što je ``mojcomp.mojlab.mojafirma.com''.\n"
-"Možete također unijeti IP adresu gateway-a ako ga imate"
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-"Zadnje, ali ne i najmanje važno, možete unijeti IP adrese vaših DNS servera."
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Ime računara (opcionalno)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Ime računara"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "DNS server 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "DNS server 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "DNS server 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "Domene za pretragu"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-"Podrazumijeva se domena za pretragu koja je dio kvalifikovanog imena računara"
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (tj. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Gateway uređaj"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresa DNS servera treba biti u formatu 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway adresa treba biti u formatu 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-"Ako je potrebno, unesite Zeroconf ime računara.\n"
-"Ovo je ime koje će vaš računar koristiti da objavi svoje\n"
-"dijeljene resurse koji nisu pod upravljanjem mreže. To nije\n"
-"potrebno na većini mreža."
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf Ime računara"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf ime računara ne smije sadržavati ."
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Podesili ste nekoliko načina za konekciju na Internet.\n"
-"Izaberite jedan od njih koji ćete koristiti.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Internet konekcija"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Podešavanje je završeno, želite li primijeniti postavke?"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Da li želite pokrenuti konekciju prilikom boota?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Da li želite pokrenuti konekciju prilikom boota?"
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "Automatski pri startu sistema"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr "Koristeći Net Applet u sistemskom trayu"
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr "Ručno (interfejs će se i dalje pokretati prilikom boota)"
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Kako želite uspostaviti ovu konekciju ?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Potrebno je restartovati mrežu. Želite li je restartovati?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Podešavanje mreže"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Došlo je do problema prilikom restartovanja mreže:\n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Da li se želite pokušati spojiti na Internet sada?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Probavam vašu konekciju..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Sistem je sada spojen na Internet."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Iz sigurnosnih razloga, sada će biti odspojen."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Izgleda da sistem nije spojen na Internet.\n"
-"Probajte promijeniti postavke vaše konekcije."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Čestitamo, podešavanje mreže i Interneta je završeno.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Nakon što je to gotovo, preporučujemo da restartujete vaš X\n"
-"okoliš kako bi se izbjegao problem sa promjenom naziva računara."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Došlo je do problema prilikom podešavanja.\n"
-"Provjerite vašu konekciju pomoću net_monitor ili mcc. Ako vaša konekcija ne "
-"radi, možete ponovo pokrenuti podešavanje"
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Pošto radite mrežnu instalaciju, vaša mreža je već podešena.\n"
-"Kliknite na U redu da zadržite tu konfiguraciju ili Odustani za podešavanje "
-"vaše Internet & Mrežne konekcije.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"Došlo je do neočekivane greške:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Konfiguracija proxija"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy treba biti http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL treba počinjati sa 'ftp:' ili 'http:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Otkrivena konfiguracija firewalla!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Upozorenje! Pronađena je postojeća konfiguracija firewalla. Možda će biti "
-"potrebno neko ručno podešavanje nakon instalacije."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"Molim unesite naziv interfejsa spojenog na Internet.\n"
-"\n"
-"Primjeri:\n"
-"\t\tppp+ za modemsku ili DSL konekciju, \n"
-"\t\teth0, ili eth1 za mrežnu konekciju, \n"
-"\t\tippp+ za isdn konekciju.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Ubacite disketu"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Ubacite FAT formatiranu disketu u jedinicu %s sa %s u root direktoriju i "
-"pritisnite %s"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Greška pri pristupu disketi, ne mogu montirati uređaj %s"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "montiranje nije uspjelo: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Extended particije nisu podržane na ovoj platformi"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Imate rupu u vašoj tabeli particija, ali je ja ne mogu upotrijebiti.\n"
-"Jedino rješenje je da pomjerite vaše primarne particije, kako bi se rupa "
-"našla pored extended particija"
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Povratak iz datoteke %s nije uspio: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Loša backup datoteka"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Greška u pisanju datoteke: %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Nešto loše se dešava na vašem disku. \n"
-"Test integriteta podataka nije uspio. \n"
-"To znači će da pisanje bilo čega na disk rezultirati smećem."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "obavezno"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "važno"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "vrlo fino"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "fino"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "možda"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "Šaljem datoteke..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(na ovom računaru)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Podešeno na ostalim računarima"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na CUPS serveru \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Default)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Print, Do not Queue"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Common Unix Printing System (udaljeni server)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "Udaljeni CUPS"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Nepoznat model"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Lokalni štampač"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Udaljeni štampač"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Štampač na udaljenom CUPS serveru"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Štampač na udaljenom lpd serveru"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Mrežni štampač (TCP/Socket)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Štampač na SMB/Windows 95/98/NT serveru"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Štampač na NetWare serveru"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Unesite URI uređaja štampača"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Spoji zadatak na komandu"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "preporučeno"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Nepoznat model"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "Podešeno na ovom računaru"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " na paralelnom portu #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", USB štampač #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", USB štampač"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", HP štampač na paralelnom portu"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", HP štampač na USB portu"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", HP štampač na HP JetDirect"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", HP štampač"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", višenamjenski uređaj na paralelnom portu #%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", višenamjenski uređaj na paralelnom portu"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", višenamjenski uređaj na USBu"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", višenamjenski uređaj na HP JetDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", višenamjenski uređaj"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", štampa u %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", štampač \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", port %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "na SMB/Windows serveru \"%s\", share \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "na Novell serveru \"%s\", štampač \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", koristeći komandu %s"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Paralelni port #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "USB štampač #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "USB štampač"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "HP štampač na paralelnom portu"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "HP štampač na USB portu"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "HP štampač na HP JetDirect"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "HP štampač"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Višenamjenski uređaj na paralelnom portu #%s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "Višenamjenski uređaj na paralelnom portu"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "Višenamjenski uređaj na USBu"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "Višenamjenski uređaj na HP JetDirect"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Višenamjenski uređaj"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Štampa u %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "na LPD serveru \"%s\", štampač \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "TCP/IP host \"%s\", port %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "SMB/Windows server \"%s\", share \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Novell server \"%s\", štampač \"%s\""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "Koristi naredbu %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Sirovo štampanje (Bez drajvera)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Lokalna mreža (mreže)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfejs \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Mreža %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Računar %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Za štampač HP LaserJet 1000 potrebno je da uploadujete firmwer prilikom "
-"paljenja. Potrebno je da skinete Windows drajvere sa HPove web stranice "
-"(firmware koji se nalazi na CDu koji je došao uz štampač ne radi) i izvadite "
-"firmware datoteku. Ovo ćete uraditi tako što ćete raspakovati "
-"samoraspakujuću '.exe' datoteku koristeći 'unzip' alat, te potražiti "
-"datoteku 'sihp1000.img'. Kopirajte ovu datoteku u direktorij '/etc/printer'. "
-"Ovdje će je automatski pronaći uploader skripta i poslati štampaču svaki put "
-"kada štampač bude spojen i upaljen.\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "Podešavanje CUPS štampača"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Ovdje možete izabrati da li štampači spojeni na ovaj računar trebaju biti "
-"dostupni drugim računarima i kojim drugim računarima."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Takođe možete odlučiti da li štampači na udaljenim računarima trebaju biti "
-"automatski dostupni sa ovog računara."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Štampači na ovom računaru su dostupni drugim računarima"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automatski pronađi dostupne štampače na udaljenim računarima"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Dijeljenje štampača na računarima/mrežama:"
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Vlastita konfiguracija"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Nema udaljenih računara"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Dodatni CUP serveri:"
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Da biste pristupili štampačima na udaljenim CUPS serverima u vašoj lokalnoj "
-"mreži, sve što treba je da uključite opciju \"Automatski pronađi dostupne "
-"štampače na udaljenim računarima\"; CUPS serveri će automatski informisati "
-"vaš računar o svojim štampačima. Svi štampači koji su poznati vašem računaru "
-"su navedeni u sekciji \"Udaljeni štampači\" glavnog Printerdrake prozora. "
-"Ako vaš CUPS server nije u lokalnoj mreži, morate ovdje unijeti njegovu IP "
-"adresu i eventualno broj porta kako biste dobili informacije od servera."
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Japanski režim štampanja"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Ako ovo uključite, moći ćete štampati obične tekstualne datoteke na "
-"japanskom jeziku. Koristite ovu funkciju samo ako zaista želite štampati "
-"japanski tekst, jer kada je aktivirana, više ne možete štampati znakove sa "
-"akcentima u latiničnim fontovima (npr. naša slova). Takođe nećete moći "
-"prilagoditi margine, veličine znakova, itd. Ova postavka će utjecati samo na "
-"štampače koji su definisani na ovom računaru. Ako želite štampati japanski "
-"tekst na udaljenom računaru, trebate aktivirati ovu funkciju na tom računaru."
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatska ispravka konfiguracije CUPSa"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Kada je upaljena ova opcija, prilikom svakog pokretanja CUPSa biće "
-"provjereno da\n"
-"\n"
-"- je instaliran LPD/LPRng, CUPS neće prepisati /etc/printcap\n"
-"\n"
-"- postoji /etc/cups/cupsd.conf, ako ne onda će biti napravljen\n"
-"\n"
-"- informacije o štampaču ne sadrže \"localhost\" kao ime servera prilikom "
-"broadcasta.\n"
-"\n"
-"Ako vam neke od ovih mjera stvaraju probleme, možete isključiti ovu opciju, "
-"ali onda se morate sami brinuti da su navedeni uslovi ispunjeni."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr "Udaljeni CUPS server i bez lokalnog CUPS demona"
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Uključen"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Isključen"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"U ovom režimu, lokalni CUPS demon će biti zaustavljen i svi zahtjevi za "
-"štampanje će ići direktno na server naveden ispod. Zapamtite da u tom "
-"slučaju nije moguće definisati lokalne redove za štampu te da, ako je "
-"navedeni server isključen, neće biti moguće štampati sa ovog računara."
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Dijeljenje lokalnih štampača"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr "Ovo su računari i mreže čiji lokalni štampači trebaju biti dostupni:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Dodaj računar/mrežu"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Izmijeni izabrani računar/mrežu"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Ukloni izabrani računar/mrežu"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "IP adresa računara/mreže:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Izaberite mrežu ili računar čijim štampačima treba omogućiti pristup."
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "Nedostaje IP adresa računara/mreže."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Unesena IP adresa računara/mreže nije ispravna.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Primjeri ispravnih IPa:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Ovaj računar/mreža je već na listi, ne možete ga ponovo dodati.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Pristupam štampačima na udaljenim CUPS serverima"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Ovdje dodajte CUPS servere čije štampače želite koristiti. Ovo trebate "
-"raditi samo ako serveri ne broadcast-uju informacije o njihovim štampačima "
-"cijeloj lokalnoj mreži."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Dodaj server"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Izmijeni izabrani server"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Ukloni izabrani server"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "Unesite IP adresu i port računara čije štampače želite koristiti."
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Ako nije naveden port, podrazumijevaće se 631."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "Nedostaje IP adresa servera!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Unesena IP adresa nije ispravna.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Broj porta treba biti cijeli broj!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Ovaj server je već na listi, ne možete ga ponovo dodati.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Uključen, Ime ili IP adresa udaljenog servera:"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Nedostaje naziv ili IP adresa CUPS servera."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Čitam podatke o štampaču..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Restartujem CUPS..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Izaberi konekciju štampača"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Kako je štampač povezan na računar?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Ovdje ne morate podešavati štampače na udaljenim CUPS serverima; ovi "
-"štampači će biti automatski prepoznati."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"UPOZORENJE: Nije aktivna nijedna lokalna mrežna konekcija, tako da ne mogu "
-"pronaći ni testirati udaljene štampače!"
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-"Automatsko prepoznavanje štampača (lokalni, TCP/Socket, SMB štampači i URI "
-"uređaja)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr "Izmijeni period za auto-detekciju mrežnih štampača"
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-"Unesite vremenski period (u msek.) tokom kojeg će se pokušavati automatski "
-"prepoznati mrežni štampač."
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-"Ako izaberete veći period, prepoznavanje mrežnih štampača će biti "
-"pouzdanije, ali će skeniranje trajati duže, pogotovo ako imate mnogo "
-"računara u mreži sa pokrenutim lokalnim firewallom."
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Period mora biti pozitivan cijeli broj!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Proveravam vaš sistem..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "i jedan nepoznat štampač"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "i %d nepoznatih štampača"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Sljedeći štampači\n"
-"\n"
-"%s%s\n"
-"su direktno spojeni na vaš sistem"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Sljedeći štampač\n"
-"\n"
-"%s%s\n"
-"su direktno spojeni na vaš sistem"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Sljedeći štampač\n"
-"\n"
-"%s%s\n"
-"je direktno spojen na vaš sistem"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Na vaš sistem je direktno spojen jedan nepoznat štampač"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Na vaš sistem je spojeno %d nepoznatih štampača"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Nema štampača koji su direktno povezani na ovaj računar"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "(Provjerite da li su svi štampači spojeni i upaljeni).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Želite li omogućiti štampanje na štampačima navedenim gore ili na štampačima "
-"u lokalnoj mreži?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Da li želite da omogućite štampanje na štampačima u lokalnoj mreži?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Da li želite omogućiti štampanje na gore navedenim štampačima?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Sigurno želite podesiti štampanje na ovom računaru?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"NAPOMENA: Ovisno o modelu štampača i sistemu štampe, biće instalirano do %d "
-"MB dodatnog softvera."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Tražim nove štampače..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "Našao štampač na %s..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " na "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Izbor modela štampača"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Koji model štampača imate?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"Printerdrake nije mogao odrediti model vašeg %s štampača. Molim izaberite "
-"odgovarajući model na listi."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ako štampač nije naveden, izaberite kompatibilan (pogledajte uputstva za "
-"štampač) ili sličan."
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "Podešavam štampač na %s..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Podešavam štampač \"%s\"..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Dodaj novi štampač"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak vam omogućuje da instalirate lokalne ili udaljene štampače "
-"koji će biti korišteni sa ovog računara, a također i sa drugih računara na "
-"mreži.\n"
-"\n"
-"On će od vas tražiti sve potrebne informacije kako bi štampač bio podešen, a "
-"vama omogućen pristup svim dostupnim drajverima, opcijama drajvera i vrstama "
-"konekcije štampača."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate štampače spojene na ovaj "
-"računar, na mrežu ili na udaljeni Windows računar.\n"
-"\n"
-"Ako imate štampač spojen na ovaj računar, molim priključite ga na računar i "
-"upalite ga kako bi bio automatski prepoznat. Takođe mrežni štampači i "
-"Windows računari moraju biti povezani i upaljeni.\n"
-"\n"
-"Obratite pažnju da automatsko prepoznavanje mrežnih štampača traje duže nego "
-"prepoznavanje štampača spojenih na ovaj računar. Stoga ugasite prepoznavanje "
-"mrežnih štampača i/ili Windows štampača ako vam ona nije potrebna.\n"
-"\n"
-" Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne "
-"želite podesiti štampač sada."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate štampače spojene na ovaj "
-"računar.\n"
-"\n"
-"Ako imate štampač spojen na ovaj računar, molim priključite ga na računar i "
-"upalite ga kako bi bio automatski prepoznat.\n"
-"\n"
-" Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne "
-"želite podesiti štampač sada."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate štampače spojene na ovaj računar "
-"ili spojene na mrežu.\n"
-"\n"
-"Ako imate štampač spojen na ovaj računar, molim priključite ga na računar i "
-"upalite ga kako bi bio auto-prepoznat. Takođe mrežni štampači moraju biti "
-"spojeni i upaljeni.\n"
-"\n"
-"Obratite pažnju da detekcija mrežnih štampača traje duže nego detekcija "
-"štampača spojenih na ovaj računar. Stoga ugasite detekciju mrežnih štampača "
-"ako vam ona nije potrebna.\n"
-"\n"
-"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne želite "
-"podesiti štampač sada."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Dobro došli u Čarobnjak za podešavanje štampača\n"
-"\n"
-"Ovaj čarobnjak će vam pomoći da instalirate štampače spojene na ovaj "
-"računar.\n"
-"\n"
-"Ako imate štampač spojen na ovaj računar, molim priključite ga na računar i "
-"upalite ga kako bi bio auto-prepoznat.\n"
-"\n"
-"Kliknite na \"Dalje\" kada budete spremni, ili na \"Odustani\" ako ne želite "
-"podesiti štampač sada."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Automatski prepoznaj štampače spojene na ovaj računar"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Automatski prepoznaj štampače spojene direktno na lokalnu mrežu"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Automatski prepoznaj štampače spojene na Microsoft Windows računare"
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "Auto prepoznavanje"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Čestitamo, vaš štampač je sada instaliran i podešen!\n"
-"\n"
-"Možete štampati koristeći komandu \"Štampaj\" u vašem programu (obično se "
-"nalazi u meniju \"Datoteka\").\n"
-"\n"
-"Ako želite dodati, ukloniti ili promijeniti ime štampača, ili ako želite "
-"promijeniti neke podrazumjevane postavke (ulazni put papira, kvaliteta "
-"štampe...), izaberite opciju \"Štampač\" u \"Hardware\" sekciji %s "
-"Kontrolnog centra."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "Ne mogu instalirati pakete %s!"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr "Preskačem auto-detekciju Windows/SMB servera"
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Auto-detekcija štampača"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Prepoznajem uređaje..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", mrežni štampač \"%s\", port %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", štampač \"%s\" na SMB/Windows serveru \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "Detektovan %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Štampač na paralelnom portu #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Mrežni štampač \"%s\", port %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Štampač \"%s\" na SMB/Windows serveru \"%s\""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Lokalni štampač"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Nije pronađen nijedan lokalni štampač! Ako želite ručno instalirati štampač, "
-"unesite ime uređaja / ime datoteke na ulaznu liniju (Paralelni portovi: /dev/"
-"lp0, /dev/lp1, ..., ekvivalentno LPT1:, LPT2:, ..., prvi USB štampač: /dev/"
-"usb/lp0, drugi USB štampač: /dev/usb/lp1, ...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Morate unijeti naziv uređaja ili datoteke!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Nije pronađen nijedan štampač!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Lokalni štampači"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Dostupni štampači"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Sljedeći štampač je prepoznat automatski."
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Ako to nije onaj koji želite podesiti, uneiste naziv uređaja / naziv "
-"datoteke u ulaznu liniju"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Alternativno, možete nasvesti naziv uređaja / naziv datoteke na ulaznoj "
-"liniji"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Ovdje je lista svih automatski prepoznatih štampača."
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Molim izaberite štampač koji želite podesiti ili unesite naziv uređaja / "
-"naziv datoteke na ulaznoj liniji"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Molim izaberite štampač kojem želite slati zadatke štampe ili unesite naziv "
-"uređaja / naziv datoteke na ulaznoj liniji"
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Podešavanje štampača će raditi potpuno automatski. Ako vaš štampač nije "
-"ispravno prepoznat ili ako želite sami podesiti štampač, uključite \"Ručno "
-"podešavanje\"."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Trenutno nije dostupna nijedna alternativa"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Molim odaberite štampač koji želite podesiti. Podešavanje štampača će raditi "
-"potpuno automatski. Ako vaš štampač nije ispravno prepoznat ili ako želite "
-"sami podesiti štampač, uključite \"Ručno podešavanje\"."
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Molim izaberite štampač kojem želite slati zadatke štampe."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Molim izaberite port na koji je vaš štampač povezan ili unesite naziv "
-"uređaja / naziv datoteke na ulaznoj liniji"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Molim izaberite na koji port je priključen vaš štampač."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelni portovi: /dev/lp0, /dev/lp1, ..., ekvivalentno sa LPT1:, "
-"LPT2:, ..., prvi USB štampač: /dev/usb/lp0, drugi USB štampač: /dev/usb/"
-"lp1, ...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Morate izabrati ili unijeti štampač / uređaj!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "Prekidam"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opcije udaljenog lpd štampača"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Da biste koristili udaljeni lpd štampač, morate dati ime računara za printer "
-"server i ime štampača na tom serveru."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Ime udaljenog računara"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Ime udaljenog štampača"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Ime udaljenog računara nedostaje!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Ime udaljenog štampača nedostaje!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Informacije"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Detektovani model: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Pretražujem mrežu..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", štampač \"%s\" na serveru \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Štampač \"%s\" na serveru \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcije SMB (Windows 9x/NT) štampača"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Da biste štampali na SMB štampač, morate dati ime SMB računara (Pažnja! Ono "
-"može biti različito od TCP/IP imena!) i eventualno IP adresu print servera, "
-"kao i share naziv štampača kojem želite pristupiti i korisničko ime, šifru i "
-"informacije o radnoj grupi."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Ako je željeni štampač automatski prepoznat, jednostavno ga izaberite sa "
-"liste i dodajte korisničko ime, šifru i/ili radnu grupu ako je to potrebno."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "SMB server ime"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB server IP"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Share naziv"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Radna grupa"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Auto prepoznat"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Treba biti dato ili ime servera ili IP adresa servera!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Naziv samba share-a nedostaje!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SIGURNOSNO UPOZORENJE!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Upravo ćete podesiti štampanje na Windows račun zaštićen šifrom. Zbog "
-"propusta u arhitekturi Samba klijentskog softvera, šifra je stavljena u "
-"običnom tekstu u komandnu liniju Samba klijenta prilikom slanja zadatka "
-"štampe Windows serveru. Stoga je moguće da drugi korisnici ovog istog "
-"računara prikažu šifru na ekranu koristeći komandu kao što je \"ps auxwww"
-"\".\n"
-"\n"
-"Preporučujemo korištenje jedne od sljedećih alternativa (u svakom slučaju "
-"pobrinite se da samo računari na vašoj lokalnoj mreži imaju pristup Windows "
-"serveru, na primjer koristeći firewall):\n"
-"\n"
-"Koristite račun bez šifre na Windows serveru, kao što je \"GUEST\" račun ili "
-"poseban račun posvećen štampanju. Nemojte ukloniti zaštitu šifrom sa vašeg "
-"ličnog računa ili administratorskog računa.\n"
-"\n"
-"Podesite vaš Windows server tako da je štampač dostupan pod LPD protokolom. "
-"Zatim podesite štampanje na ovom računaru uz konekciju tipa \"%s\" u "
-"Printerdrake-u.\n"
-"\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Podesite vaš Windows server tako da je štampač dostupan putem IPP protokola "
-"i podesite štampanje sa ove mašine koristeći \"%s\" tip konekcije u "
-"Printerdrake-u.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Povezati štampač na Linux server i dopustiti Windows računarima da se "
-"spajaju na njega kao klijenti.\n"
-"\n"
-"Da li zaista želite nastaviti sa podešavanjem štampača kako ste započeli?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opcije NetWare štampača"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Da biste štampali na NetWare štampač, trebate dati naziv NetWare print "
-"servera (Pažnja! Ono može biti različito od njegovog TCP/IP imena!) kao i "
-"naziv reda za štampu na štampaču kojem želite pristupiti i eventualno "
-"korisničko ime i šifru."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Printer Server"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Naziv reda za štampu"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP naziv servera nedostaje!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP naziv reda nedostaje!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", host \"%s\", port %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Host \"%s\", port %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/socket opcije štampača"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Izaberite jedan od automatski prepoznatih štampača sa liste ili unesite ime "
-"računara ili IP i opcionalno broj porta (podrazumjeva se 9100) u polja za "
-"unos."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Da biste štampali na TCP ili socket štampač, morate dati hostname ili IP "
-"adresu štampača i opcionalno broj porta (podrazumjeva se 9100). Na HP "
-"JetDirect serverima broj porta je obično 9100, na ostalim serverima on može "
-"varirati. Pogledajte priručnik vašeg hardware-a."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Nedostaje hostname štampača ili IP adresa!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Hostname štampača ili IP adresa"
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Osvježavam listu URIja uređaja..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "URI uređaja štampača"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Možete dati direktno URI za pristup štampaču. URI mora zadovoljavati ili "
-"CUPS ili Foomatic specifikacije. Obratite pažnju da nisu svi tipovi URIja "
-"podržani od svih spoolera."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Trebate unijeti ispravan URI!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "Spoji (pipe) na komandu"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Ovdje možete navesti bilo koju komandnu liniju kojoj će biti prosljeđen "
-"zadatak umjesto direktnog slanja na štampač."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Komandna linija"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "Trebate unijeti komandnu liniju!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-"Na mnogim HP štamačima dostupne su posebne funkcije: održavanje (provjera "
-"nivoa tinte, čišćenje glava, poravnanje...) na svim ne previše starim "
-"inkjetima, skeniranje na višefunkcijskim uređajima, kao i pristup "
-"memorijskoj kartici kod štampača sa ovom mogućnošću."
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-"Da biste pristupili ovim posebnim funkcijama na vašem HP štampaču, morate ga "
-"podesiti odgovarajućim programom: "
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-"Ili koristeći noviji HPLIP koji dozvoljava održavanje kroz jednostavnu "
-"grafičku aplikaciju \"Toolbox\" i four-edge full-bleed mogućnost na novijim "
-"PhotoSmart modelima "
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-"ili sa starijim HPOJ koji dozvoljava samo skeniranje i pristup memorijskoj "
-"kartici, ali može biti koristan u slučaju problema sa HPLIP. "
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr "Šta je vaš izbor (izaberite \"Nijedno\" za ne-HP štampače)?"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Da li je vaš štampač multifunkcijski uređaj od HPa ili Sony-ja (OfficeJet, "
-"PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 sa skenerom, DeskJet 450, "
-"Sony IJP-V100), ili HP PhotoSmart ili HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Instaliram %s pakete..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr "Samo štampanje će biti moguće na %s."
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-"Nisam mogao ukloniti vašu staru HPOJ konfiguracionu datoteku %s za vaš %s! "
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr "Molim uklonite datoteku ručno i restartujte HPOJ."
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Provjeravam uređaj i podešavam %s..."
-
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Koji štampač želite podesiti za HPLIP?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instaliram SANE pakete..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr "Skeniranje na %s neće biti moguće."
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr "Korištenje i održavanje %s"
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instaliram mtools pakete..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "Pristup foto memorijskoj kartici na %s neće biti moguć."
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Skeniram pomoću HP multifunkcijskog uređaja"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-"Pristup foto memorijskoj kartici na vašem HP multifunkcionalnom uređaju"
-
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr "Podešavam uređaj..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Omogućujem pristup štampaču putem CUPSa..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Čitam bazu podataka o štampačima ..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Unesite ime štampača i komentare"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Naziv štampača bi se trebao sastojati od slova, brojeva i donje linije"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Štampač \"%s\" već postoji,\n"
-"da li sigurno želite prepisati ovu konfiguraciju?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-"Naziv štampača \"%s\" sadrži više od 12 znakova. Ovo će učiniti da se "
-"štampaču ne može pristupiti sa Windows računara. Želite li zaista koristiti "
-"ovo ime?"
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Svakom štampaču treba dati ime (npr. \"stampac\"). Polja Opis i Lokacija "
-"nije potrebno popuniti. Oni su komentari za korisnike."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Naziv štampača"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Opis"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Lokacija"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Pripremam bazu podataka o štampačima..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Model vašeg štampača"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake je uporedi ime modela koje je dobijeno od automatskog "
-"prepoznavanja štampača sa modelima koji su navedeni u njegovoj bazi podataka "
-"kako bi našao najbliži. Ovaj izbor možda nije tačan, pogotovo ako vaš "
-"štampač uopšte nije naveden u bazi. Stoga provjerite da li je izbor ispravan "
-"i ako je tako kliknite \"Model je ispravan\", u suprotnom kliknite "
-"\"Izaberite model ručno\" kako biste ručno izabrali vaš model štampača na "
-"sljedećem ekranu.\n"
-"\n"
-"Za vaš štampač Printerdrake je našao:\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Model je ispravan"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Izaberite model ručno"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Molim provjerite da li je Printerdrake izvršio ispravno automatsko "
-"prepoznavanje modela vašeg štampača. Potražite ispravan model na listi ako "
-"kursor stoji na pogrešnom modelu ili na \"Raw štampač\"."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "Instaliraj PPD datoteku proizvođača"
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-"Uz svaki PostScript štampač dostavljena je PPD datoteka koja opisuje opcije "
-"i mogućnosti štampača."
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"Ova datoteka je obično negdje na CDu sa Windows i Mac drajverima koji ste "
-"dobili uz štampač."
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr "Možete takođe potražiti PPD datoteke na web sajtu proizvođača."
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"Ako imate Windows instaliran na ovom računaru, PPD datoteku možete naći i na "
-"Windows particiji."
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-"Instaliranjem PPD datoteke štampača i njenim korištenjem pri podešavanju će "
-"vam postati dostupne sve mogućnosti koje pruža hardware štampača"
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"Ovdje možete izabrati PPD datoteku koju treba instalirati. Ona će zatim biti "
-"korištena za podešavanje vašeg štampača."
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "Instaliraj PPD datoteku"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "sa diskete"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "ostalo"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "Izaberite PPD datoteku"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "PPD datoteka %s ne postoji ili se ne može čitati!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "PPD datoteka %s nije sukladna PPD specifikaciji!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "Instaliram PPD datoteku..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Podešavanje OKI winprinter-a"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Sada podešavate OK laserski winprinter. Ovi štampači\n"
-"koriste jedan poseban komunikacijski protokol i stoga rade samo kada su "
-"spojeni na prvom paralelnom portu. Ako je vaš štampač spojen na neki drugi "
-"port ili na print server molim spojite štampač na prvi paralelni port prije "
-"nego što odštampate testnu stranicu. Inače štampač neće raditi. Drajver će "
-"ignorisati vaše podešenje tipa konekcije."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Podešavanje Lexmark inkjet-a"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet drajveri za štampu koje obezbjeđuje Lexmark podržavaju samo lokalne "
-"štampače, a ne i štampače na udaljenim računarima ili print serverima. Molim "
-"spojite vaš štampač na lokalni port ili ga podesite na računaru na koji je "
-"spojen."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Da biste mogli štampati sa vašim Lexmark inkjetom na ovoj konfiguraciji, "
-"potrebni su vam inkjet drajveri za štampu koje obezbjeđuje Lexmark (http://"
-"www.lexmark.com/). Kliknite na link \"Drivers\". Zatim izaberite vaš model a "
-"zatim \"Linux\" kao operativni sistem. Drajveri dolaze u vidu RPM paketa ili "
-"shell skripte sa interaktivnom grafičkom instalacijom. Ne morate obaviti ovu "
-"konfiguraciju na grafičkom interfejsu. Odustanite odmah nakon licencnog "
-"ugovora. Zatim odštampajte stranice za poravnavanje glava sa "
-"\"lexmarkmaintain\" i podesite opcije poravnanja glave pomoću ovog programa."
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Podešavanje Lexmark X125"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Drajver za ovaj štampač podržava samo štampače spojene lokalno putem USBa, a "
-"ne i štampače na udaljenim računarima ili print serverima. Molim spojite vaš "
-"štampač na lokalni USB port ili ga podesite na računaru na koji je spojen."
-
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Samsung ML/QL-85G podešavanje"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Drajver za ovaj štampač podržava samo štampače spojene lokalno na prvi "
-"paralelni port, a ne i štampače na udaljenim računarima ili print serverima "
-"ili na drugim paralelnim portovima. Molim spojite vaš štampač na prvi "
-"paralelni port ili ga podesite na računaru na koji je spojen."
-
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Canon LBP-460/660 podešavanje"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Upload firmware-a za HP LaserJet 1000"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Podrazumjevane opcije štampača\n"
-"\n"
-"Trebate provjeriti da su veličina papira i tip tinte (ako je dostupno) "
-"ispravno podešeni. Obratite pažnju da za voma veliku kvalitetu / rezoluciju "
-"štampa može postati znatno sporija."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Podrazumjevane postavke štampača"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opcija %s mora biti cijeli broj!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opcija %s mora biti broj!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Opcija %s izvan raspona!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Da li želite da podesite ovaj štampač (\"%s\")\n"
-"kao podrazumjevani štampač?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Testna stranica"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Molim izaberite testne stranice koje ćete štampati.\n"
-"Pažnja: foto testna stranica može tražiti dosta vremena za štampu a na "
-"laserskim štampačima sa malo memorije možda neće nikad ni izaći. U većini "
-"slučajeva dovoljno je odštampati standardnu testnu stranicu."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Nijedna testna strana"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Štampaj"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Standardna testna strana"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativna testna strana (Letter)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativna testna strana (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Foto testna strana"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Nemoj štampati testnu stranicu"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Štampam testnu stranicu..."
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr "Preskačem foto testnu stranu."
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testna stranica je poslana štampaču.\n"
-"Može potrajati određeno vrijeme dok štampač krene.\n"
-"Status štampanja:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testna stranica je poslana štampaču.\n"
-"Može potrajati određeno vrijeme dok štampač krene.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Da li je radilo ispravno?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Sirovi štampač"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Za štampanje datoteke sa komandne linije (terminalski prozor) možete "
-"koristiti ili komandu \"%s <datoteka>\" ili grafički alat za štampu: \"xpp "
-"<datoteka>\" ili \"kprinter <datoteka>\". Grafički alati vam omogućuju da "
-"jednostavno odaberete štampač i izmjenite podešenja opcija.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ove komande možete također koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za štampu mnogih programa, ali ovdje ne morate navesti ime "
-"datoteke jer tu datoteku obezbjeđuje sam program.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Komanda \"%s\" također omogućava izmjenu opcija za pojedinačni zadatak "
-"štampe. Jednostavno dodajte željena podešenja na komandnu liniju, npr. \"%s "
-"<datoteka>\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampač ili pročitajte listu "
-"koja je data ispod ili kliknite na dugme \"Lista opcija za štampu\".%s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Ovo je lista mogućih opcija za štampu za trenutni štampač:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Za štampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Ovu komandu također možete koristiti u polju \"Komanda za štampu\" u "
-"dijalozima za štampu mnogih programa. Ovdje nije potrebno navesti naziv "
-"datoteke jer tudatoteku obezbjeđuje sam program.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Za listu opcija koje su dostupne za trenutni štampač kliknite na dugme "
-"\"Lista opcija za štampu\"."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Za štampanje datoteke sa komandne linije (terminalski prozor) koristite "
-"komandu \"%s <datoteka>\" ili \"%s <datoteka>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Možete također koristiti grafički interfejs \"xpdq\" za podešavanje opcija i "
-"upravljanje zadacima štampe.\n"
-"Ako koristite KDE okruženje radne površine imate \"dugme za paniku\". To je "
-"ikona na radnoj površini čiji je naziv \"ZAUSTAVI štampač!\", koja "
-"zaustavlja sve zadatke štampe odmah kada kliknete na nju. Ovo je korisno "
-"npr. u slučaju zaglavljivanja papira.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Komande \"%s\" i \"%s\" također omogućavaju izmjenu opcija za pojedinačni "
-"zadatak štampe. Jednostavno dodajte željena podešenja na komandnu liniju, "
-"npr. \"%s <datoteka>\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Štampam/skeniram/foto kartica na \"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Štampam/skeniram na \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Štampam/pristupam foto kartici na \"%s\""
-
-#: printer/printerdrake.pm:3896
-#, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Korištenje/održavanje štampača \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Štampanje na štampač \"%s\""
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Lista opcija za štampu"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-"Vaš %s je podešen za HPov HPLIP drajver. Na ovaj način podržane su mnoge "
-"napredne mogućnosti vašeg štampača.\n"
-"\n"
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-"Skener u vašem štampaču se može koristiti uobičajenim SANE softverom, kao "
-"što su npr. Kooka ili XSane (oba u meniju Multimedija/Grafika). "
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-"Pokrenite Scannerdrake (Hardver/Skener u Mandriva Linux Kontrolnom centru) "
-"kako biste dijelili vaš skener putem mreže.\n"
-"\n"
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-"Čitaču memorijskih kartica u vašem štampaču se može pristupiti kao običnom "
-"USB memorijskom uređaju. "
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-"Nakon ubacivanja kartice, na vašem desktopu bi se trebala pojaviti ikona sa "
-"hard diskom za pristup kartici.\n"
-"\n"
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-"Čitaču memorijskih kartica u vašem štampaču se može pristupiti koristeći "
-"HPov Printer Toolbox (meni: Sistem/Nadzor/HP Printer Toolbox) klikom na "
-"dugme \"Access Photo Cards...\" u kartici \"Functions\"."
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-"Zapamtite da je ovo prilično sporo, čitanje slika direktno iz kamere ili "
-"putem USB čitača kartica je obično brže.\n"
-"\n"
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-"HPov Printer Toolbox (meni: Sistem/Nadzor/HP Printer Toolbox) vam nudi mnoge "
-"funkcije nadzora stanja i održavanja za vaš %s:\n"
-"\n"
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr " - Nivo tinte/statusne info\n"
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr " - Čišćenje glave za tintu\n"
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr " - Poravnanje glave za štampu\n"
-
-#: printer/printerdrake.pm:3944
-#, c-format
-msgid " - Color calibration\n"
-msgstr " - Kalibracija boje\n"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"Vaš višenamjenski uređaj je automatski konfigurisan kako bi mogao skenirati. "
-"Sada možete skenirati sa komandne linije pomoću komande \"scanimage"
-"\" (\"scanimage -d hp:%s\" kako biste naveli scanner ako imate više od "
-"jednog) ili koristeći grafičke okoline \"xscanimage\" ili \"xsane\". Ako "
-"koristite GIMP, možete također skenirati koristeći odgovarajuću stavku u "
-"meniju \"File\"/\"Acquire\". Za više informacija, pogledajte još i \"man "
-"scanimage\" na komandnoj liniji (\"#scanimage\" u Konqueroru).\n"
-"\n"
-"Nije potrebno pokretati \"scannerdrake\" za podešavanje skeniranja na ovom "
-"uređaju, \"scannerdrake\" vam je potreban samo ako želite dijeliti skener na "
-"lokalnoj mreži."
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Vaš štampač je podešen automatski kako bi vam dao pristup memoriji foto "
-"kartice sa PCa. Sada možete pristupiti vašim foto karticama koristeći "
-"grafički program \"MToolsFM\" (Meni: \"Programi\" -> \"Datotečni alati\" -> "
-"\"MTools File Manager\") ili alat komandne linije \"mtools\" (kucajte \"man "
-"mtools\" na komandnoj liniji za više informacija). Datotečni sistem vaše "
-"kartice ćete naći pod slovom \"p:\", ili pod narednim slovima ako imate više "
-"od jednog HP štampača sa jedinicom za foto kartice. U \"MToolsFM\" "
-"promijeniti slovo drajva koristeći polje u gornjem desnom uglu liste "
-"datoteka."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Premještanje konfiguracije štamapča"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Možete kopirati konfiguraciju štampača koju ste napravili za spooler %s u % "
-"s, vaš trenutni spooler. Svi podaci o konfiguraciji (naziv štampača, opis, "
-"lokacija, tip konekcije kao i podrazumjevane opcije) će biti preuzeti, ali "
-"zadaci štampe neće biti prebačeni.\n"
-"Svi redovi ne mogu biti prebačeni zbog sljedećih razloga:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS ne podržava štampače na Novell serverima ili štampačekoji šalju podatke "
-"u komandama slobodnog oblika.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podržava samo lokalne štampače, udaljene LPD štampačei Socket/TCP "
-"štampače.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng ne podržavaju IPP štampače.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Pored toga, redovi koji nisu kreirani ovim programom ili sa \"foomatic-"
-"configure\" ne mogu biti premješteni."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Također štampači konfigurisani sa PPD datotekama koje su osigurali njihovi "
-"proizvođači ili sa vlastitim CUPS drajverima ne mogu biti prebačeni."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Označite štampače koje ćete prebacivati i kliknite na \n"
-"\"Prebaci\"."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Nemoj prebacivati štampače"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Prebaci"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Štampač pod imenom \"%s\" već postoji pod %s: \n"
-"Kliknite na \"Prebaci\" da to prepišete.\n"
-"Možete također unijeti novo ime ili preskočiti ovaj štampač."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Novo ime štampača"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "Prebacujem %s ..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Prebacili ste vaš bivši podrazumjevani štampač (\"%s\"),Da li će to također "
-"biti podrazumjevani štampač podnovim sistemom štampe %s?"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Osvježavam podatke o štampaču..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Pokrećem mrežu..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Sada podesite mrežu"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Mrežna funkcionalnost nije podešena"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sada ćete podesiti udaljeni štampač. Ovo zahtjeva aktivan pristup mreži, ali "
-"vaša mreža još uvijek nije podešena. Ako želite nastaviti bez podešavanja "
-"mreže, nećete moći koristiti štampač koji sada podešavate. Kako želite da "
-"nastavimo?"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Nastavi bez podešavanja mreže"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"Podešavanje mreže koje je napravljeno tokom instalacije sada ne može biti "
-"pokrenuto. Molim provjerite da li će mreža postati dostupna nakon bootanja "
-"sistema i popravite podešenja koristeći %s Kontrolni centar, sekcija \"Mreža "
-"i Internet\"/\"Konekcija\", a zatim podesite štampač, ponovo koristeći %s "
-"Kontrolni centar, sekcija \"Hardver\"/\"Štampač\""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Mrežni pristup nije aktivan i nije mogao biti pokrenut. Molim provjerite "
-"vašu konfiguraciju i vaš hardware. Onda ponovo pokušajte podesiti udaljeni "
-"štampač."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Restartujem sistem za štampu ..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "visok"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "paranoičan"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaliram sistem za štampu na sigurnosnom nivou: %s"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sada ćete instalirati sistem za štampu %s na sistemu koji je na sigurnosnom "
-"nivou % s.\n"
-"\n"
-"Ovaj sistem za štampu pokreće demon (pozadinski proces) koji čeka zadatke "
-"štampe i rješava ih. Ovom demonu takođe mogu pristupiti drugi računari putem "
-"mreže, tako da je to moguća tačka napada. Stoga se tek rijetki od odabranih "
-"demona pokreću na ovom sigurnosnom nivou.\n"
-"\n"
-"Da li zaista želite podesiti štampanje na ovom računaru?"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Pokrećem sistem za štampu tokom boota"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Sistem za štampu (%s) se neće pokrenuti automatski prilikom boota računara.\n"
-"\n"
-"Moguće je da je automatsko pokretanje isključeno prilikom promjene na viši "
-"nivo sigurnosni, pošto je sistem za štampu moguća tačka napada.\n"
-"\n"
-"Da li želite da ponovo uključite automatsko pokretanje sistema za štampu?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "Provjeravam instalirani software..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Uklanjam %s..."
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Ne mogu ukloniti %s sistem štampe!"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "Instaliram %s..."
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Ne mogu instalirati %s sistem štampe!"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"U ovom režimu ne postoji lokalni sistem štampe, a svi zahtjevi za štampanje "
-"će ići direktno na server naveden ispod. Zapamtite da u tom slučaju nije "
-"moguće definisati lokalne redove za štampu te da, ako je navedeni server "
-"isključen, neće biti moguće štampati sa ovog računara."
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-"Unesite ime računara ili IP adresu vašeg CUPS servera i kliknite na \"U redu"
-"\" ako želite koristiti ovaj režim, u suprotnom kliknite na \"Izlaz\"."
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "Ime ili IP adresa udaljenog servera:"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Postavljam podrazumjevani štampač..."
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Lokalni CUPS sistem štampe ili udaljeni CUPS server?"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr "CUPS sistem štampe se može koristiti na dva načina: "
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr "1. Možete pokrenuti CUPS sistem štampe lokalno. "
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-"U tom slučaju možete koristiti štampače spojene na ovaj računar, a udaljeni "
-"štampači na drugim CUPS serverima unutar ove mreže će biti automatski "
-"otkriveni. "
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-"Nedostatak ovog pristupa je što je potrebno više resursa na lokalnom "
-"računaru. Biće potrebno instalirati dodatne softverske pakete, CUPS demon će "
-"biti pokrenut u pozadini i koristiće nešto memorije, a biće otvoren IPP port "
-"(port 631)."
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr "2. Svi zahtjevi za štampu se odmah šalju udaljenom CUPS serveru. "
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-"Ovdje je lokalno zauzeće resursa svedeno na minimum. Nije pokrenut CUPS "
-"demon niti je otvoren ijedan port, nije instalirana softverska "
-"infrastruktura potrebna za lokalne redove štampe, tako da je zauzeto manje "
-"memorije i diskovnog prostora."
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-"Nedostatak je što nije moguće definisati lokalne štampače te da, ako je "
-"navedeni server isključen, neće biti moguće štampati sa ovog računara. "
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr "Kako želite podesiti CUPS na ovom računaru?"
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr "Udaljeni server, navedite ime ili IP adresu ovdje:"
-
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr "Lokalni CUPS sistem štampe"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Izaberite spooler štampača"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Koji sistem štampanja (spooler) želite koristiti?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Nisam uspio podesiti štampač \"%s\"!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instaliram Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "Ne mogu instalirati pakete %s, %s se ne može pokrenuti!"
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Sljedeći štampači su podešeni. Kliknite dva puta na neki od njih za izmjenu "
-"postavki; ako ga želite učiniti podrazumijevanim štampačem; ili da biste "
-"vidjeli informacije o njemu. "
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Prikaži sve dostupne CUPS štampače"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Osvježi listu štampača (kako bi bili prikazani svi dostupni CUPS štampači)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "Podešavanje CUPSa"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Promijenite sistem štampe"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Normalni mod"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Ekspertni mod"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Opcije štampača"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Izmjeni konfiguraciju štampača"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Štampač %s%s\n"
-"Šta želite da izmjenite na ovom štampaču?"
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "Ovaj štampač je onemogućen"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Uradi!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Tip konekcije štampača"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Naziv štampača, opis, lokacija"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Proizvođač štampača, model, drajver"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Proizvođač štampača, model"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Podesi štampač kao podrazumjevani"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "Omogući štampač"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "Onemogući štampač"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Štampaj testnu stranicu"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Saznaj kako koristiti ovaj štampač"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Ukloni štampač"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Uklanjam stari štampač \"%s\" ..."
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Štampač \"%s\" je sada omogućen."
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Štampač \"%s\" je sada onemogućen."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Da li zaista želite da uklonite štampač \"%s\"?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Uklanjam štampač \"%s\" ..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Podrazumjevani štampač"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Štampač \"%s\" je sada podešen kao podrazumjevani štampač."
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Ne mogu dodati particiju na _formatiran_ RAID %s"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nema dovoljno particija za RAID nivo %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "Ne mogu napraviti direktorij /usr/share/sane/firmware!"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "Ne mogu napraviti link /usr/share/sane/%s!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr "Ne mogu kopirati firmware datoteku %s u /usr/share/sane/firmware!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "Ne mogu postaviti privilegije firmware datoteke %s!"
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr "Ne mogu instalirati pakete koji su potrebni za dijeljenje skenera."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr "Vaši skeneri neće biti dostupni neprivilegovanim korisnicima."
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "Prihvati/odbij neispravne IPv4 poruke o grešci."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr " Dozvoli/zabrani broadcast-ovani ICMP eho."
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr " Prihvati/odbij ICMP eho."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Dozvoli/zabrani autologin."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"Ako je postavljeno \"SVE\", dozvoljeno je postojanje /etc/issue i /etc/issue."
-"net.\n"
-"\n"
-"Ako je postavljeno na NIŠTA, datoteke nisu dozvoljene.\n"
-"\n"
-"Inače, dozvoljen je samo /etc/issue."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "Dozvoli/zabrani restartovanje računara iz konzole."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Dozvoli/zabrani prijavu kao root sa udaljenog računara"
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Dozvoli/zabrani direktan root login."
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Dozvoli/zabrani listu korisnika sistema na display manager-ima (kdm i gdm)."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-"Dozvoli/zabrani izvoz ekrana kada\n"
-"proslijeđujete sa root računa drugim korisnicima.\n"
-"\n"
-"Pogledajte pam_xauth(8) za više detalja.'"
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"Dozvoli/zabrani X konekcije:\n"
-"\n"
-"- SVE (sve konekcije su dozvoljene),\n"
-"\n"
-"- LOKAL (samo konekcije sa lokalne mašine),\n"
-"\n"
-"- NIŠTA (nisu dozvoljene konekcije)."
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"Ovaj argument određuje da li su klijenti autorizovani za\n"
-"povezivanje na X server putem mreže na TCP portu 6000."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"Autorizuj:\n"
-"\n"
-"- sve servise koje kontrolišu tcp_wrapperi (vidi hosts.deny(5) man "
-"stranicu), ako je podešeno na \"SVE\",\n"
-"\n"
-"- samo lokalne servise, ako je podešeno na \"LOKAL\",\n"
-"\n"
-"- nijedan, ako je podešeno na \"NIŠTA\".\n"
-"\n"
-"Da biste autorizovali servise koji su vam potrebni, koristite /etc/hosts."
-"allow (vidi hosts.allow(5))."
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"Ako je SERVER_LEVEL (ili, ako ovaj ne postoji, SECURE_LEVEL)\n"
-"veći od 3 u /etc/security/msec/security.conf, pravi simbolički link\n"
-"/etc/security/msec/server koji pokazuje na /etc/security/msec/server."
-"<SERVER_LEVEL>.\n"
-"/etc/security/msec/server koristi chkconfig --add da odluči da li\n"
-"da doda servis ako je prisutan u datoteci tokom instalacije paketa."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"Uključi/isključi crontab i at za korisnike.\n"
-"\n"
-"Stavi korisnicima kojima je to dozvoljeno u /etc/cron.allow i /etc/at.allow "
-"(vidi man stranice at(1) i crontab(1))."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr "Uključi/isključi syslog izvještaje na konzoli 12"
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"Uključi/isključi zaštitu od lažiranja rezolviranja imena.  Ako\n"
-"je aktivna opcija \"%s\", takođe prijavljuje u syslog."
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Sigurnosna upozorenja:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "Uključi/isključi zaštitu od lažiranja IP adrese."
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "Uključi/isključi libsafe ako je libsafe pronađen na sistemu."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "Uključi/isključi logiranje čudnih IPv4 paketa."
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Uključi/isključi msec provjeru svakog sata."
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-" Omogući su samo članovima wheel grupe ili dozvoli su svakom korisniku."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "Koristi šifru za provjeru autentičnosti korisnika."
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr "Aktiviraj/isključi provjeru promiskuitetnog moda Ethernet kartica."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr " Aktiviraj/isključi dnevnu sigurnosnu provjeru."
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr " Uključi/isključi sulogin(8) na jednokorisničkom nivou."
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr "Dodaj ime kao izuzetak od upravljanja starenjem šifara putem msec-a."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-"Podesi starenje šifre na \"max\" dana, a pauzu izmjene na \"inactive\"."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-"Podesi dužinu historije šifara kojom se sprječava ponovno korištenje šifara."
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Podesite minimalnu dužinu šifre, minimalan broj cifara i minimalan broj "
-"velikih slova."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Postavlja root-ov umask."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "ako je postavljeno na da, provjerava otvorene portove."
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"ako je postavljeno na da, provjerava:\n"
-"\n"
-"- prazne šifre,\n"
-"\n"
-"- nedostatak šifre u /etc/shadow\n"
-"\n"
-"- korisnike sa id-om 0 koji nisu root."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"ako je postavljeno na da, provjerava privilegije datoteka u korisničkom home-"
-"u."
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"ako je postavljeno na da, provjerava da li su mrežni uređaji u "
-"promiskuitetnom modu."
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "ako je postavljeno na da, izvršava dnevne sigurnosne provjere."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "ako je postavljeno na da, provjerava dodavanje/brisanje sgid datoteka."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "ako je postavljeno na da, provjerava prazne šifre u /etc/shadow."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "ako je postavljeno na da, provjerava checksum suid/sgid datoteka."
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"ako je postavljeno na da, provjerava dodavanje/brisanje suid root datoteka."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "ako je postavljeno na da, prijavljuje datoteke bez vlasnika."
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"ako je postavljeno na da, provjerava datoteke/direktorije koje svako može "
-"pisati."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "ako je postavljeno na da, izvršava chkrootkit provjere."
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"ako je uključeno, šalje mail izvještaj na ovu email adresu, inače ga šalje "
-"root-u."
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere mailom."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "Ne šalji mailove ako nema razloga za upozorenja"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "ako je postavljeno na da, izvršava neke provjere rpm baze podataka."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere u syslog."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "ako je postavljeno na da, prijavljuje rezultate provjere na tty."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Podesi veličinu historije naredbi shella. Vrijednost -1 znači neograničeno."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-"Postavlja istek vremena shella. Vrijednost nula znači bez isteka vremena."
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "Jedinica za vrijeme je sekunda"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Podešava korisnički umask."
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Prihvati neispravne IPv4 poruke o grešci"
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Prihvati broadcast ICMP eho"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "Prihvati ICMP eho"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* postoji"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "Restartovanje za korisnika na konzoli"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Dozvoli prijavu kao root putem mreže"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "Direktna root prijava"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr "Izlistaj korisnike na display manager-ima (kdm i gdm)"
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr "Izvoz ekrana kada prosljeđujete sa roota na druge korisnike"
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "Dozvoli X Window konekcije"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "Autorizuj TCP konekcije na X Window"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "Autorizuj sve servise koje kontrolišu tcp_wrapperi"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Chkconfig poštuje msec pravila"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "Omogući korisnicima da koriste \"crontab\" i \"at\""
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "Syslog izvještaji na konzoli 12"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "Zaštita od lažiranja rezolucije imena"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "Uključi zaštitu od lažiranja IP adrese"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "Uključi libsafe ako libsafe postoji na vašem sistemu"
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "Uključi logovanje čudnih IPv4 paketa"
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "Uključi msec provjeru svakog sata"
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr "Omogući su samo za članove wheel grupe ili za bilo kojeg korisnika"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "Koristi šifru da provjeriš autentičnost korisnika"
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "Provjera promiskuitetnog režima Ethernet kartica"
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "Dnevna sigurnosna provjera"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "Sulogin(8) na jednokorisničkom nivou"
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Bez starenja šifre za"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr "Izaberite istek šifre i pauze prije deaktivacije računa"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Dužina historije šifara"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "Minimalna dužina šifre i broj cifara i velikih slova"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "Root umask"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Veličina historije shell-a"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Istek vremena shella"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "Korisnički umask"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Provjeri otvorene portove"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "Provjeri neupotrijebljene račune"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "Provjeri privilegije datoteka u korisničkom home-u."
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "Provjeri da li su mrežni uređaji u promiskuitetnom modu"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Izvršavaj dnevne sigurnosne provjere"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "Provjeri dodavanje/brisanje sgid datoteka"
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "Provjeri prazne šifre u /etc/shadow"
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "Provjeri checksum suid/sgid datoteka"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "Provjeri dodavanje/brisanje suid root datoteka"
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "Prijavi datoteke bez vlasnika"
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Provjeri datoteke/direktorije koje svako može pisati"
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "Izvrši chkrootkit provjere"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "Ne šalji mailove kada nije potrebno"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"Ako je uključeno, šalje mail izvještaj na ovu email adresu, inače ga šalje "
-"root-u"
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "Prijavi rezultate provjere mailom"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "Izvrši neke provjere rpm baze podataka"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Prijavi rezultate provjere u syslog"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Prijavi rezultate provjere na tty"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Dobrodošli u Crackers"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Loš"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Visok"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Viši"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoičan"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Ovaj nivo treba koristiti pažljivo. On čini vaš sistem lakšim za upotrebu,\n"
-"ali vrlo osjetljivim: ne smije biti korišten za računar koji je spojen na\n"
-"druge ili na Internet. Nema pristupa šifrom."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Šifra je sada aktivirana, ali korištenje za mrežni računar još nije "
-"preporučeno."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ovo je standardna sigurnost koja je preporučena za računar koji će biti "
-"korišten za spajanje na Internet kao klijent."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Već postoje određena ograničenja, a više automatskih provjera se pokreće "
-"svaku noć."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Sa ovim sigurnosnim nivoom, postaje moguće koristiti ovaj sistem kao "
-"server.\n"
-"Sigurnost je sada dovoljno visoka za upotrebu sistema kao servera koji "
-"prima\n"
-"konekcije sa mnogo klijenata. Napomena: ako je vaš računar samo klijent na "
-"Internetu, možda je bolje da izaberete niži nivo."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Baziran na prethodnom nivou, ali sada je sistem potpuno zatvoren.\n"
-"Sigurnosne osobine na maksimumu."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec osnovne opcije"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Molim izaberite nivo sigurnosti"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Nivo sigurnosti"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Koristi libsafe za servere"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Biblioteka koja brani od napada \"buffer overflow\" i \"format string\"."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sigurnosni administrator (login ili email)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Pokreće ALSA zvučni sistem (Advanced Linux Sound Architecture)"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron je periodični izvršitelj programa."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Apmd se koristi za nadgledanje statusa baterija i njegovo bilježenje preko\n"
-"sysloga. Takođe se može koristiti za gašenje računara kada su baterije pri "
-"kraju."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Izvršava naredbe zakazane putem at komande u zadato vrijeme,\n"
-"te pokreće programe u pozadini kada je računar neopterećen."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Cron je standardan UNIX program koji periodično pokreće programe koje\n"
-"zada korisnik. Vixie cron dodaje veći broj mogućnosti osnovnom\n"
-"UNIX cronu, uključujući bolju sigurnost i moćnije opcije za podešavanje."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"FAM je demon koji nadzire datoteke. Pomoću njega programi znaju ako se neka "
-"datoteka promijeni.\n"
-"FAM koriste GNOME i KDE grafičke okoline."
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM dodaje podršku za miša tekstualnim programima kao što je\n"
-"Midnight Commander. On također omogućuje konzolne isjeci/umetni operacije\n"
-"pomoću miša i uključuje podršku za pop-up menije na konzoli."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ispituje hardware i eventualno podešava novi ili\n"
-"izmjenjeni hardware."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache je World Wide Web server.  Koristi se za posluživanje HTML\n"
-"datoteka i CGI skripti."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver (obično nazvan inetd) pokreće razne druge Internet\n"
-"servise po potrebi. Odgovoran je za pokretanje mnogih servisa, kao što su\n"
-"telnet, ftp, rsh i rlogin. Isključivanje inetd-a isključuje sve servise za "
-"koje je\n"
-"on nadležan."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Pokreće filtriranje paketa za Linux kernele serije 2.2 kako\n"
-"bi se aktivirao firewall i zaštitio vaš računar od mrežnih napada."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ovaj paket učitava izabranu mapu tastature kao što je podešeno u\n"
-"/etc/sysconfig/keyboard, što se može podesiti korištenjem kbdconfig\n"
-"programa. Ovaj servis biste trebali ostaviti uključenim na većini računara."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatsko regenerisanje kernel zaglavlja u /boot za\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatsko prepoznavanje i podešavanje hardware-a tokom boota."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf će ponekad obaviti raznolike zadatke tokom boota\n"
-"kako bi se održala sistemska konfiguracija."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je demon za štampu koji je potreban da bi lpr sistem štampe radio "
-"ispravno.\n"
-"To je u osnovi server koji dodjeljuje zadatke štampe štampaču/ima."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuelni Server, koristi se za izgradnju servera visokih performansi\n"
-"i dostupnosti (clusteri servera)."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je Domain Name Server (DNS) koji se koristi za određivanje IP "
-"adrese iz imena računara."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Montira i demontira sve Network File System (NFS), SMB (Lan\n"
-"Manager/Windows) i NCP (NetWare) tačke montiranja."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivira/deaktivira sve mrežne interfejse koji su konfigurisani\n"
-"za pokretanje tokom boota."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n"
-"Ovaj servis omogućuje funkcionalnost NFS servera, kojeg podešavate\n"
-"putem /etc/exports datoteke."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je popularan protokol za dijeljenje datoteka preko TCP/IP mreža.\n"
-"Ovaj servis omogućuje NFS funkcionalnost zaključavanja datoteka."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Automatski uključuje numlock pod konzolom i grafičkim okruženjem\n"
-"prilikom boota."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podrška za OKI 4w i kompatibilne 'winprinter' štampače."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"PCMCIA podrška služi za ispravan rad uređaja kao što su mrežne\n"
-"kartice i modemi, priključenih na PCMCIA port (obično na laptopima).\n"
-"Neće se pokrenuti sve dok nije ispravno konfigurisan, tako da je\n"
-"sigurno imati ga instaliranog i na računarima kojima nije potreban."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper upravlja RPC konekcijama, koje koriste protokoli kao što\n"
-"su NFS i NIS. Portmap server mora raditi na računarima koje služe kao\n"
-"serveri za protokole koji koriste RPC mehanizam."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix je Mail Transport Agent, tj. program koji šalje poštu sa jednog "
-"računara na drugi."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Snima i učitava sistemski spremnik entropije za veću kvalitetu\n"
-"generisanja slučajnih brojeva."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Dodjeljuje raw uređaje blokovskim uređajima (kao što su\n"
-"particije hard diska), za potrebu programa kao što je Oracle ili DVD playeri"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed demon omogućuje da se automatska IP tabela rutiranja podešava\n"
-"preko RIP protokola. Mada se RIP često koristi na malim mrežama, "
-"kompleksniji\n"
-"protokoli rutiranja su potrebni za složene mreže."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Rstat protokol omogućava korisnicima na mreži da dobave\n"
-"mjeru performansi za svaki računar na toj mreži"
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Rusers protokol omogućava korisnicima na mreži da identificiraju\n"
-"ko je prijavljen na ostalim računarima."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"Rwho protokol omogućava udaljenim korisnicima da dobiju listu svih\n"
-"korisnika prijavljenih na računar na kojem radi rwho demon (slično fingeru)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Pokreće zvučni sistem na vašem računaru"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je sistem pomoću kojeg mnogi servisi zapisuju poruke\n"
-"u razne sistemske dnevnike (logove).  Pametno je uvijek imati pokrenuti "
-"syslog."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Pokreće drajvere za vaše USB uređaje."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "Pokreće X Font Server (ovo je nužno da bi Xorg radio)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Izaberite koji servisi se trebaju pokretati automatski prilikom boota"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Štampa"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Internet"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Dijeljenje datoteka"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Udaljena administracija"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Server baze podataka"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "aktivan"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "zaustavljen"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Servisi i demoni"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nema dodatnih informacija\n"
-"o ovom servisu, žalim."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "Pokreni po potrebi"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "Prilikom boota"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Start"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Stop"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Šta je Mandriva Linux?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Dobro došli u <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-"Mandriva Linux je <b>Linux distribucija</b> koja sadržava jezgru sistema, "
-"koja se naziva <b>operativni sistem</b> (baziranu na Linux kernelu) kao i "
-"<b>mnoštvo programa</b> koji zadovoljavaju sve potrebe koje vam mogu pasti "
-"na pamet."
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"Mandriva Linux je <b>najprijateljskija</b> Linux distribucija danas. On je "
-"takođe i jedna od <b>najšire korištenih</b> Linux distribucija na svijetu!"
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Open Source</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Dobro došli u svijet <b>otvorenog izvornog koda</b>!"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"Mandriva Linux u potpunosti podržava open-source model. To znači da je ovo "
-"novo izdanje je rezultat <b>saradnje</b> između <b>Mandriva-ovog tima "
-"programera</b> i <b>međunarodne zajednice</b> Mandriva Linux saradnika."
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-"Željeli bismo se <b>zahvaliti</b> svima koji su sudjelovali u razvoju ovog "
-"najnovijeg izdanja."
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>GPL - General Public License</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-"Većina softvera koji je uključen u ovoj distribuciji, kao i svi Mandriva "
-"Linux alati, koriste <b>GNU General Public License</b>."
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-"GPL je u jezgru open source modela; on garantuje svima <b>slobodu</b> da "
-"koriste, proučavaju, distribuiraju i poboljšavaju softver na bilo koji "
-"način, pod uslovom da rezultate svog rada omoguće i drugima."
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-"Osnovna korist ovoga je da je broj programera praktički <b>neograničen</b>, "
-"što rezultira softverom <b>vrlo visoke kvalitete</b>."
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>Uključite se u zajednicu</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-"Mandriva Linux ima jednu od <b>najvećih zajednica</b> korisnika i "
-"programera. Uloga takve zajednice je raznolika, počevši od prijavljivanja "
-"bugova do razvoja novih programa. Zajednica igra <b>ključnu ulogu</b> u "
-"svijetu Mandriva Linuxa."
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-"Da biste <b>naučili više</b> o našoj dinamičnoj zajednici, molimo posjetite "
-"<b>www.mandrivalinux.com</b> ili direktno <b>www.mandrivalinux.com/en/"
-"cookerdevel.php3</b> i <b>uključite se</b> u razvoj."
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr "<b>Download verzija</b>"
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-"Trenutno instalirate <b>Mandriva Linux Download</b>. To je besplatna verzija "
-"koju Mandriva želi zadržati <b>dostupnom svima</b>."
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-"Download verzija <b>ne smije uključivati</b> nijedan softverski proizvod "
-"koji nije open-source. Stoga, u Download verziji nećete naći:"
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-"\t* <b>Vlasničke drajvere</b> (kao što su drajveri za NVIDIA®, ATI™, "
-"winmodeme itd.)."
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-"\t* <b>Vlasnički softver</b> (kao što su Acrobat® Reader®, RealPlayer®, "
-"Flash™, itd.)."
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-"Takođe nećete imati pristup <b>servisima</b> koji su sastavni dio nekih "
-"drugih Mandriva proizvoda."
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr "<b>Discovery, Tvoj prvi Linux Desktop</b>"
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr "Trenutno instalirate <b>Mandriva Linux Discovery</b>."
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery je <b>najjednostavnija</b> i <b>najprijateljskija</b> Linux "
-"distribucija. On uključuje pažljivo probran <b>prvoklasni softver</b> za "
-"uredske, multimedijalne i Internet aktivnosti. Njegov meni je orjentisan "
-"prema zadacima, pri čemu svaki zadatak obavlja određeni program."
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr "<b>PowerPack, Najbolji Linux Desktop</b>"
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr "Trenutno instalirate <b>Mandriva Linux PowerPack</b>."
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-"PowerPack je Mandriva-ov <b>premijerni Linux desktop</b> proizvod. PowerPack "
-"uključuje <b>hiljade programa</b> - sve od najpopularnijih do najsloženijih."
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr "<b>PowerPack+, Linux rješenje za Desktop i Server</b>"
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr "Trenutno instalirate <b>Mandriva Linux PowerPack+</b>."
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-"PowerPack+ je <b>cjelovito Linux rješenje</b> za male i srednje <b>mreže</"
-"b>. PowerPack+ uključuje hiljade <b>desktop programa</b>, kao i širok izbor "
-"<b>serverskih aplikacija</b> svjetske klase."
-
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Mandriva proizvodi</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-"<b>Mandriva</b> je razvio širok raspon <b>Mandriva Linux</b> proizvoda."
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Mandriva Linux proizvodi su:"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr "\t* <b>Discovery</b>, Tvoj prvi Linux Desktop."
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr "\t* <b>PowerPack</b>, Najbolji Linux Desktop."
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr "\t* <b>PowerPack+</b>, Linux rješenje za Desktop i Server."
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-"\t* <b>Mandriva Linux za x86-64</b>, Mandriva Linux rješenje kojim ćete "
-"izvući maksimum iz vašeg 64-bitnog procesora."
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr "<b>Mandriva proizvodi (mobilni proizvodi)</b>"
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-"Mandriva je razvio dva proizvoda koji vam omogućuju da koristite Mandriva "
-"Linux <b>na bilo kojem računaru</b> bez potrebe da ga ustvari instalirate:"
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-"\t* <b>Move</b>, Mandriva Linux distribucija koja se izvršava u potpunosti "
-"sa bootabilnog CD-ROMa."
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-"\t* <b>GlobeTrotter</b>, Mandriva Linux distribucija preinstalirana na "
-"kompaktnom USB hard disku - “LaCie Mobile Hard Drive”."
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "<b>Mandriva proizvodi (profesionalna rješenja)</b>"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-"Ispod su navedeni Mandriva proizvodi dizajnirani da zadovolje "
-"<b>profesionalne potrebe</b>:"
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr "\t* <b>Corporate Desktop</b>, Mandriva Linux Desktop za preduzeća."
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr "\t* <b>Corporate Server</b>, Mandriva Linux rješenje za servere."
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-"\t* <b>Multi-Network Firewall</b>, Mandriva Linux rješenje za sigurnost "
-"mreža."
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>KDE Izbor</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-"Uz vaš Discovery, biće vam predstavljen <b>KDE</b>, najnaprednije i "
-"prijateljsko <b>grafičko radno okruženje</b> koje je trenutno dostupno."
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-"KDE će učiniti vaše <b>prve korake</b> sa Linuxom tako <b>jednostavnim</b> "
-"da vam neće više nikada pasti na pamet rad s drugim operativnim sistemom!"
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-"KDE takođe uključuje niz <b>dobro integrisanih programa</b> kao što je "
-"Konqueror web preglednik i Kontact menadžer ličnih informacija."
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Izaberite vaše grafičko radno okruženje</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"Sa PowerPack-om, imaćete izbor <b>grafičkog radnog okruženja</b>. Mandriva "
-"je izabrao <b>KDE</b> kao podrazumijevano okruženje."
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-"KDE je jedno od <b>najnaprednijih</b> i <b>prijateljskih</b> grafičkih "
-"radnih okruženja koja su trenutno dostupna. KDE uključuje niz integrisanih "
-"programa."
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-"Ipak preporučujemo vam da isprobate i druge (uključujući <b>GNOME</b>, "
-"<b>IceWM</b> itd.) i izaberete vaše omiljeno okruženje."
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"Uz PowerPack+, imaćete izbor <b>grafičkog radnog okruženja</b>. Mandriva je "
-"izabrao <b>KDE</b> kao podrazumijevano okruženje."
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "<b>OpenOffice.org</b>"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr "Uz Discovery, otkrićete <b>OpenOffice.org</b>."
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-"OpenOffice.org je <b>uredski paket punih mogućnosti</b> koji uključuje "
-"programe za obradu teksta, tablične proračune, prezentacije i crtanje."
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-"OpenOffice.org može čitati i pisati većinu vrsta <b>Microsoft® Office</b> "
-"dokumenata kao što su Word, Excel i PowerPoint® datoteke."
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-"Discovery uključuje i <b>Kontact</b>, novo KDEovo <b>groupware rješenje</b>."
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"Više od naprednog <b>e-mail klijenta</b>, Kontact takođe uključuje i "
-"<b>adresar</b>, <b>kalendar i rokovnik</b>, kao i alat za pravljenje "
-"<b>bilješki</b>!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-"To je najlakši način da komunicirate sa vašim poznanicima i da organizirate "
-"vaše vrijeme."
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Koristite Internet</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-"Discovery će vam dati mogućnost da pristupite <b>svim Internet resursima</b>:"
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* Pretražujte <b>Web stranice</b> koristeći Konqueror."
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr "\t* <b>Razgovarajte</b> online sa vašim prijateljima koristeći Kopete."
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "\t* <b>Prenosite</b> datoteke koristeći KBear."
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr "<b>Uživajte u multimedijalnim mogućnostima</b>"
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr "Discovery će učiniti <b>multimediju</b> vrlo jednostavnom za vas:"
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr "\t* Gledajte vaše omiljene <b>filmove</b> koristeći Kaffeine."
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr "\t* Slušajte vaše <b>muzičke datoteke</b> koristeći amaroK."
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* Mijenjajte i kreirejte <b>slike i fotografije</b> koristeći GIMP."
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr "<b>Uživajte u širokoj paleti programa</b>"
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"U Mandriva Linux meniju naći ćete <b>jednostavne</b> programe <b>za sve "
-"zadatke</b>:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-"\t* Pravite, mijenjajte i razmjenjujte uredske dokumente koristeći "
-"<b>OpenOffice.org</b>."
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* Preuzmite kontrolu nad svojim ličnim podacima koristeći integrisane "
-"pakete za lične informacije: <b>Kontact</b> i <b>Evolution</b>"
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-"\t* Pretražujte Web stranice koristeći <b>Mozilla</b> i <b>Konqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* Učestvujte u online chat sesijama koristeći <b>Kopete</b>"
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* Slušajte <b>audio CDove</b> i <b>muzičke datoteke</b>, gledajte svoje "
-"<b>filmove</b>."
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* Mijenjajte slike i fotografije koristeći <b>The Gimp</b>"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Razvojna okruženja</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr "PowerPack vam daje najbolje alate za <b>razvoj</b> vlastitih programa."
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-"Uživaćete u moćnoj, integrisanoj razvojnoj okolini KDEa, <b>KDevelop</b>, "
-"koja vam omogućuje da programirate u mnogim jezicima."
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-"PowerPack takođe uključuje <b>GCC</b>, vodeći Linux kompajler, kao i <b>GDB</"
-"b>, prateći debugger."
-
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>Programerski editori</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-"PowerPack vam omogućuje da birate između sljedećih <b>popularnih editora</b>:"
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: prilagodljiv editor sa prikazom u realnom vremenu"
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-"\t* <b>XEmacs</b>: još jedan tekst editor i sistem za razvoj aplikacija "
-"otvorenog izvornog koda"
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-"\t* <b>Vim</b>: napredni editor teksta sa više mogućnosti od standardnog Vi"
-
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>Programski jezici</b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-"Pomoću ovih <b>moćnih alata</b>, možete pisati programe u <b>desetinama "
-"programskih jezika</b>:"
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr "\t* Čuveni <b>programski jezik C</b>."
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr "\t* Objektno orjentisani jezici:"
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr "\t* Jezici za skripting:"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr "\t* I mnogi drugi."
-
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>Programerski alati</b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-"Koristeći moćnu integrisanu razvojnu okolinu <b>KDevelop</b> i vodeći Linux "
-"kompajler <b>GCC</b>, možete praviti programe u <b>mnogim različitim "
-"jezicima</b> (C, C++, Java™, Perl, Python itd.)."
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Groupware server</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-"PowerPack+ vam pruža <b>Kolab</b>, potpuni <b>groupware server</b> koji vam, "
-"pomoću klijenta koji se zove <b>Kontact</b>, omogućuje da:"
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* Šaljete i primate vaš <b>e-mail</b>."
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr "\t* Razmjenjujete vaše <b>rasporede</b> i <b>adresare</b>."
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr "\t* Upravljate vašim <b>bilješkama</b> i <b>listama zadataka</b>."
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Serveri</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-"Osnažite vašu poslovnu mrežu <b>premijernim serverskim rješenjima</b>, "
-"uključujući:"
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr "\t* <b>Samba</b>: Dijeljenje datoteka i štampa za MS-Windows klijente"
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: Najšire korišteni web server"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-"\t* <b>MySQL</b> i <b>PostgreSQL</b>: Najpopularnije svjetske Open Source "
-"baze podataka."
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: Concurrent Versions System, dominantni open-source sistem za "
-"kontrolu revizija, mrežno transparentan"
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr "\t* <b>ProFTPD</b>: Visoko konfigurabilni FTP server pod GPL licencom"
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr "\t* <b>Postfix</b> i <b>Sendmail</b>: Popularni i moćni mail serveri."
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Mandriva Linux Kontrolni centar</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"<b>Mandriva Linux Kontrolni centar</b> je kolecija najvažnijih alata "
-"specifičnih za Mandriva Linux koji olakšavaju podešavanje vašeg računara."
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-"Odmah će vam se svidjeti ovaj skup <b>više od 60</b> korisnih alata za "
-"<b>lagano podešavanje vašeg sistema</b>: hardware uređaja, definisanje "
-"tačaka montiranja, podešavanje mreže i Interneta, prilagođavanje sigunosnog "
-"nivoa vašeg računara itd."
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>Open-source model</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-"Kao i svo računarsko programiranje, za razvoj open-source softwara je "
-"<b>potrebno vrijeme i ljudi</b>. Kako bi poštovao open-source filozofiju, "
-"Mandriva vam prodaje dodatnu vrijednost proizvoda i usluga kako bi "
-"<b>nastavio usavršavati Mandriva Linux</b>. Ako želite <b>podržati open-"
-"source filozofiju</b> kao i razvoj Mandriva Linuxa, <b>molimo vas</b> da "
-"razmotrite kupovinu nekog od naših proizvoda ili usluga!"
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>On-line prodavnica</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"Da naučite više o našim proizvodima i uslugama, možete posjetiti našu e-"
-"commerce platforma. u</"
-"b>.                                                        <b>"
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-"Tamo možete naći sve naše proizvode, usluge, kao i proizvode trećih lica."
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-"Ova platforma je upravo <b>redizajnirana</b> kako bi se unaprijedila njena "
-"efikasnost i upotrebljivost."
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "Navratite danas u <b>store.mandriva.com</b>!"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-"<b>Mandriva Club</b> je <b>savršen dodatak</b> vašem Mandriva Linux "
-"proizvodu."
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-"Iskoristite razne <b>vrijedne pogodnosti<b> tako što ćete se učlaniti u "
-"Mandriva Club, među kojima su:"
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-"\t* <b>Posebni popusti</b> za proizvode i usluge u našoj on-line prodavnici "
-"<b>store.mandriva.com</b>."
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-"\t* Pristup <b>komercijalnim programima</b> (kao što su drajveri za NVIDIA® "
-"ili ATI™ uređaje)."
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* Učešće u Mandriva Linux <b>korisničkim forumima</b>"
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-"\t* <b>Rani i privilegovani pristup</b>, prije javnog izdanja, Mandriva "
-"Linux <b>ISO imidžima</b>."
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-"<b>Mandriva Online</b> je nova premijum usluga koju Mandriva s ponosom nudi "
-"svojim klijentima!"
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-"Mandriva Online vam pruža širok izbor usluga za <b>jednostavno ažuriranje</"
-"b> vaših Mandriva Linux sistema:"
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-"\t* <b>Savršena</b> sigurnost sistema (automatsko ažuriranje programa)."
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-"\t* <b>Obavještenja</b> o novim verzijama (putem e-maila ili appleta na "
-"desktopu)."
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr "\t* Fleksibilno <b>planiranje</b> ažuriranja."
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-"\t* Menadžment <b>svih vaših Mandriva Linux sistema</b> putem jednog "
-"korisničkog računa."
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-"Da li vam je potrebna <b>podrška?</b> Upoznajte Mandriva tehničke eksperte "
-"na našoj <b>platformi za tehničku podršku</b> www.mandrivaexpert.com."
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-"Zahvaljujući pomoći <b>kvalificiranih eksperata za Mandriva Linux</b>, "
-"uštedićete mnogo vremena."
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-"Za bilo kakva pitanja u vezi Mandriva Linuxa, možete kupiti incidente za "
-"podršku na <b>store.mandriva.com</b>."
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Uredska radna stanica"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Uredski programi: obrada teksta (OpenOffice.org Write, KWord), tablični "
-"proračun (OpenOffice.org Calc, KSpread), PDF preglednici itd."
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Uredski programi: obrada teksta (kword, abiword), tablični alati (kspread, "
-"gnumeric), pdf preglednici itd."
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Stanica za igru"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zabavni programi: arkadne igre, stolne igre, strategije itd."
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Multimedijalna stanica"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Programi za pregled i editovanje zvuka i videa"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Internet stanica"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Skup alata za čitanje i slanje pošte i news-a (mutt, tin...) i pregledanje "
-"Weba"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Mrežni računar (klijent)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Klijenti za razne protokole uključujući ssh"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Podešavanje"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Alati za lakše podešavanje računara"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Alati za konzolu"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editori, shellovi, alati za datoteke, terminali"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C i C++ biblioteke, programi i include datoteke"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Dokumentacija"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knjige i howto-i na temu Linuxa i slobodnog softvera"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Linux Standard Base. Podrška za programe trećih lica"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "Groupware"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Kolab server"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Internet gateway"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "Mail/News"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix mail server, Inn news server"
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "Imenički server"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "FTP server"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Serveri domenskih imena i mrežnih informacija"
-
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Server za dijeljenje datoteka i štampača"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "NFS server, Samba server"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Baze podataka"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "Server PostgreSQL ili MySQL baze podataka"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Mail"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Postfix mail server"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL ili MySQL baza podataka"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Network Computer server"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, ssh server"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "KDE radna stanica"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, osnovno grafičko okruženje sa izborom pratećih alata"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "GNOME radna stanica"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafička okolina sa skupom korisnički orjentisanih programa i alata za radnu "
-"površinu"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Ostale grafičke okoline"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, itd."
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Alati"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "SSH server"
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "Webmin"
-
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Webmin server za podešavanje sistema"
-
-#: share/compssUsers.pl:191
-#, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Mrežni alati i nadzor"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr "Alati za nadzor, praćenje potrošnje, tcpdump, nmap, ..."
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "Mandriva čarobnjaci"
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "Čarobnjaci za podešavanje serverâ"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Program za backup and restore\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"OPCIJE:\n"
-"  --boot            - omogućuje podešavanje boot loadera\n"
-"  --splash          - omogućuje podešavanje boot teme\n"
-"podrazumijevano: podešavanje autologin mogućnosti"
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPCIJE:\n"
-"  --help            - ispisuje ovu pomoć.\n"
-"  --report          - program treba biti neki od Mandriva Linux alata\n"
-"  --incident        - program treba biti neki od Mandriva Linux alata"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-"[--add]\n"
-"  --add             - čarobnjak \"dodaj mrežni interfejs\"\n"
-"  --del             - čarobnjak \"obriši mrežni interfejs\"\n"
-"  --skip-wizard     - upravljanje konekcijama\n"
-"  --internet        - podesi internet\n"
-"  --wizard          - isto što i --add"
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"Program za uvoz i nadzor fontova                                     \n"
-"\n"
-"OPCIJE:\n"
-"--windows_import : uvezi sa dostupnih windows particija.\n"
-"--xls_fonts      : prikaži sve postojeće fontove koje prijavljuje xls\n"
-"--install        : instaliraj bilo koji font ili direktorij.\n"
-"--uninstall      : deinstaliraj bilo koji font ili direktorij.\n"
-"--replace        : zamijeni font ako vec postoji\n"
-"--application    : 0 bez programa.\n"
-"                 : 1 podrška za sve poznate programe.\n"
-"                 : ime_programa  npr. so za staroffice \n"
-"                 : i gs za ghostscript za samo taj program."
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIONS]...\n"
-"Podešavanje Mandriva Linux Terminal Servera\n"
-"--enable         : omogući MTS\n"
-"--disable        : onemogući MTS\n"
-"--start          : pokreni MTS\n"
-"--stop           : zaustavi MTS\n"
-"--adduser        : dodaj postojećeg sistemskog korisnika MTSu (potrebno je "
-"korisničko ime)\n"
-"--deluser        : obriši postojećeg sistemskog korisnika sa MTSa (potrebno "
-"je korisničko ime)\n"
-"--addclient      : dodaj klijentski računar MTSu (potrebna je MAC adresa, "
-"IP, nbi image ime)\n"
-"--delclient      : obriši klijentski računar sa MTSa (potrebna je MAC "
-"adresa, IP, nbi image ime)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[tastatura]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=mojfajl] [--word=mojarijec] [--explain=regexp] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Program za povezivanje na mrežu/Internet i nadzor veze\n"
-"\n"
-"--defaultintf interface : podesi podrazumijevani interfejs\n"
-"--connect : spoji se na Inernet, ako nisi već spojen\n"
-"--disconnect : prekini vezu s Internetom, ako si spojen\n"
-"--force : koristi se sa (dis)connect : prinudi operaciju.\n"
-"--status : vraća 1 ako je spojen, u suprotnom 0.\n"
-"--quiet : bez interaktivnosti. Koristi se sa (dis)connect."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-"  --no-confirmation      ne postavljaj prvo pitanje u Mandriva Update modu\n"
-"  --no-verify-rpm        ne provjeravaj potpise paketa\n"
-"  --changelog-first      prikaži changelog prije filelist u opisnom prozoru\n"
-"  --merge-all-rpmnew     predloži merge svih pronađenih .rpmnew/.rpmsave "
-"datoteka"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake rezolucija"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Upotreba: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Trebate restartovati računar kako bi izmjene stupile na snagu"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Molim izvršite logout i zatim koristitite Ctrl-Alt-BackSpace"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-"Trebate se odjaviti i ponovo prijaviti na sistem kako bi izmjene stupile na "
-"snagu"
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "Beskorisno bez Terminal servera"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s traži korisničko ime...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s zahtijeva ime računara, MAC adresu, IP adresu, nbi-image, 0/1 za "
-"THIN_CLIENT, 0/1 za Local Config...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: %s zahtijeva ime računara...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Podešavanje Terminal servera"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Omogući server"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Onemogući server"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Pokreni server"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Zaustavi server"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Net Boot Images"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Dodaj/obriši korisnike"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Dodaj/obriši klijente"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Image"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr "Klijenti/Korisnici"
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "Čarobnjak za prvo pokretanje"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr "%s definisan kao dm, dodajem gdm korisnika na /etc/passwd$$CLIENT$$"
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Prekini Čarobnjaka"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr "Molim snimite dhcpd config!"
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr "Koristi thin klijente."
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr "Sinhronizuj postavke tastature X klijenta sa serverom."
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"Molim izaberite vrstu klijenta.\n"
-"    'Tanki' klijenti pokreću sve na serverskom CPU/RAM, koristeći samo ekran "
-"klijenta.\n"
-"    'Debeli' klijenti koriste svoj CPU/RAM ali serverski datotečni sistem."
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "Pravim mrežne boot slike za sve kernele"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Ovo će potrajati par minuta."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Gotovo!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-"Sinhronizujem listu korisnika servera sa klijentima, uključujući root-a."
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-"Da bi izmjene napravljene na thin klijentima postale aktivne, potrebno je "
-"restartovati display manager. Da restartujem sada?"
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr "Pregled Terminal Servera"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - Čuvaj %s:\n"
-"        \t\tDa bi se korisnici mogli prijaviti na sistem sa klijenta bez "
-"diska, njihova stavka u\n"
-"        \t\t/etc/shadow se mora kopirati u %s. drakTermServ pomaže\n"
-"        \t\tu ovome tako što dodaje i briše sistemske korisnike iz ove "
-"datoteke."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Boot disketa"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "Boot ISO"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "PXE Image"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "Podrazumijevana verzija kernela"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr "Napravi PXE imidže (images)."
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Izgradi cijeli kernel -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Nije izabran kernel!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Izgradi jedan NIC -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "Nije izabran nijedan NIC!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Izgradi sve kernele -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Obriši"
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "Nije izabran image!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Obriši sve NBIje"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Određuje šifru u sistemskoj bazi podataka koja se razlikuje\n"
-"od one u bazi podataka Terminal Servera.\n"
-"Obrišite i ponovo dodajte korisnika u Terminal Server da biste omogućili "
-"pristup."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Dodaj korisnika -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Obriši korisnika"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "tip: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "lokalni konfig: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Omogući lokalno podešavanje\n"
-"hardvera."
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "Nije napravljena boot image!"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Thin klijenti"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Omogući thin klijente"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-"Sinhronizuj postavke tastature\n"
-" X klijenta sa serverom."
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Dodaj klijenta -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "tip: fat"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "tip: tanki"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "lokalne datoteke: ne"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "lokalni config: da"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Izmijeni klijent"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Onemogući lokalnu konfiguraciju"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Obriši klijent"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "dhcpd podešavanje..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Morate restartovati Display Manager da bi izmjene stupile na snagu. \n"
-"(na konzoli restartujte dm servis)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr "Tanki klijent neće raditi sa automatskom prijavom. Da je isključim?"
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "Svi klijenti koriste %s"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Subnet:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Routeri:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet mask:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Broadcast adresa:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Ime domena:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "DNS serveri:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Početak IP raspona:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "Kraj IP raspona:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr "Dodaj TS includes na postojeću konfiguraciju"
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Zapiši konfiguraciju"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Podešavanje dhcpd servera"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Većinu ovih vrijednosti uzimam iz\n"
-"vašeg aktivnog sistema.\n"
-"Možete ih izmijeniti po potrebi."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Molim ubacite disketu:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Ne mogu pristupiti disketi!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Sada možete izvaditi disketu"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Nema pogodne disketne jedinice!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "PXE image je %s/%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "Greška u pisanju %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO image je %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Nešto je pogrešno! - Da li je instaliran mkisofs?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Najprije treba napraviti /etc/dhcpd.conf !"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr "%s passwd loš u Terminal serveru - prepisujem...\n"
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s nije korisnik...\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s je već korisnik Terminal servera\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "Dodavanje %s na Terminal server nije uspjelo!\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "%s dodan na Terminal server\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "Obrisao %s...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "%s nije pronađen...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow i /etc/hosts.deny su već podešeni - bez izmjene"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Konfiguracija je promijenjena - da restartujem clusternfs/dhcpd?"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Greška!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Ne mogu pronaći potrebnu image datoteku '%s'"
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Podešavanje auto instalacije"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"Sada ćete podesiti autoinstalacijsku disketu. Ova opcija je pomalo opasna i "
-"mora biti korištena uz pažnju.\n"
-"\n"
-"Sa ovom opcijom bićete u mogućnosti da ponovite instalaciju koju ste obavili "
-"na ovom računaru, pri ćemu ćete biti interaktivno upitani za neke korake "
-"kako biste promijenili njihove vrijednosti.\n"
-"\n"
-"Zbog maksimalne sigurnosti, particioniranje i formatiranje nikad neće biti "
-"obavljeno automatski, bez obzira šta izaberete tokom instalacije na ovaj "
-"računar.\n"
-"\n"
-"Pritisnite \"U redu\" za nastavak."
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "ponovi"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "ručno"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Automatska konfiguracija koraka"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Molim izaberite za svaki korak da li ćete ga ponoviti kao i u vašoj "
-"instalaciji ili će se obaviti ručno"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Pravim autoinstalacijsku disketu"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Ubacite još jednu praznu disketu u jedinicu %s (za drajvere)"
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Pravim autoinstalacijsku disketu (drajver disk)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Dobro došli.\n"
-"\n"
-"Parametri automatske instalacije su dostupni u odjeljcima lijevo"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Čestitamo!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa je uspješno napravljena.\n"
-"Sada možete ponoviti vašu instalaciju."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Auto instalacija"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Dodaj stavku"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Ukloniti zadnju stavku"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"Expect je proširenje TCL skripting jezika koje omogućuje interaktivne sesije "
-"bez intervencije korisnika."
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "Zapiši šifru ovog sistema u konfiguraciju DrakBackup-a."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"Za višesesijski CD, samo će prva sesija obrisati CDRW. U suprotnom, CDRW se "
-"briše prije svakog backupa."
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"Ova opcija će zapisati datoteke koje su promijenjene.  Tačno ponašanje ovisi "
-"o tome da li je izabran inkrementalni ili diferencijalni režim."
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"Inkrementalni backupi snimaju samo datoteke koje su promijenjene ili nove od "
-"zadnjeg backupa."
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Diferencijalni backupi snimaju samo datoteke koje su promijenjene nakon "
-"originalnog 'baznog' backupa."
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"Ovo bi trebao biti lokalni korisnik ili email adresa kojem želite poslati "
-"rezultate backupa. Trebate navesti funkcionalan mail server."
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"Datoteke i wild-cards navedene u datoteci .backupignore na vrhu stabla "
-"direktorija neće biti backupovane."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"Za backup na druge medije, datoteke će biti napravljene na hard disku, a "
-"zatim prebačene na taj medij.  Uključivanjem ove opcije, tar datoteke koje "
-"su napravljene na hard disku će biti pobrisane nakon backupa."
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"Neki protokoli, kao što je rsync, se mogu podesiti na serverskom kraju.  "
-"Umjesto korištenja puta direktorija, možete koristiti ime 'modula' za put "
-"servisa."
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"Vlastito vam omogućuje da navedete vaš vlastiti datum i vrijeme.  Ostale "
-"opcije koriste run-parts u /etc/crontab."
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr "Nije izabran medij za cron operaciju."
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr "Nije izabran interval za cron operaciju."
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Intervalni cron nije dostupan za ne-root korisnike"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr "\"%s\" nije ni ispravna e-mail adresa ni postojeći lokalni korisnik!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"\"%s\" je lokalni korisnik, ali niste izabrali lokalni SMTP, tako da morate "
-"unijeti kompletnu e-mail adresu!"
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-"Lista ispravnih korisnika izmijenjena, prepisujem konfiguracionu datoteku."
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "Stara lista korisnika:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "Nova lista korisnika:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      DrakBackup Izvještaj \n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      DrakBackup Izvještaj o demonima\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Detalji izvještaja\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Ukupno napredak"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s već postoji, da ga obrišem?\n"
-"\n"
-"Ako ste već jednom obavili ovaj proces, vjerovatno\n"
-"trebate očistiti unos iz liste autoriziranih ključeva na serveru."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Možda će trebati par trenutaka da se generišu ključevi."
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "Ne mogu pokrenuti %s."
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Nema upita za šifru na %s na portu %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Pogrešna šifra na %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Pristup odbijen pri prenosu %s na %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Ne mogu pronaći %s na %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s ne odgovara"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"Transfer uspješan\n"
-"Možda je potrebno da provjerite da li se možete prijaviti na server sa:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"bez pitanja o šifri."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "Nema CDR/DVDR u drajvu!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Izgleda da na ovaj medij nije moguće snimati!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Medij nije izbrisiv!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Potrebno je par trenutaka da se obriše medij."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problem sa privilegijama tokom pristupa na CD."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "Nema trake u %s!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Backup-uj sistemske datoteke..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Datoteke backup-a hard diska..."
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Backup-uj korisničke datoteke..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Backup-uj ostale datoteke..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Napredak backup-a hard diska..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Nema izmjena na backupu!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Problem sa FTP konekcijom: Nije bilo moguće poslati vaše backup datoteke "
-"putem FTPa.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-"Greška tokom slanja datoteke preko FTPa. Molim ispravite vašu FTP "
-"konfiguraciju."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "lista datoteka poslana putem FTPa: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem CDa:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktivnosti putem trake:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr "Greška tokom slanja pošte. Vaš e-mail izvještaj nije poslan."
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Greška tokom slanja pošte. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Ne mogu napraviti katalog!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Molim uključite sve potrebne opcije.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Ove opcije mogu spasiti ili vratiti sve datoteke u vašem /etc direktoriju.\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Backup sistemskih datoteka. (/etc direktorij)"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-"Koristi inkrementalni/diferencijalni backup  (nemoj prebrisati stare backupe)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Koristi inkrementalni backup"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "Koristi diferencijalni backup"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Zaobiđi kritične datoteke (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Sa ovom opcijom bićete u mogućnosti da vratite bilo koju\n"
-" verziju vašeg /etc direktorija."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Molim izaberite sve korisnike koje želite uključiti u vaš backup."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "Ne uključuj spremnik web preglednika"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Izaberite datoteke ili direktorije i kliknite na 'U redu'"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Ukloni izabrano"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Korisnici"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Koristi mrežnu konekciju za backup"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Net Method:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "Koristi Expect za SSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "Napravi/premjesti backup ključeve za SSH"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Prebaci odmah"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Drugi (ne drakbackup) ključevi su već na mjestu"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Ime računara ili IP."
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr "Direktorij (ili modul) za smještaj backupa na ovom računaru."
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Zapamti ovu šifru"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Potrebno ime računara, korisničko ime i šifra!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Koristi CD/DVDROM za backup"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Izaberite vaš CD/DVD uređaj"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Izaberite veličinu vašeg CD/DVD medija"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "Višesesijski CD"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "CDRW medij"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Obrišite vaš RW medij (prva sesija)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " Obriši odmah "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "DVD+RW medij"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "DVD-R medij"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "DVDRAM uređaj"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "Nije definisan CD uređaj!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Koristi traku za backup"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Ime uređaja kojeg ćete koristiti za backup"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr "Backup direktno na traku"
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Ne premotavaj traku nakon backupa"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Obriši traku prije backupa"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Izbaci traku nakon backupa"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Unesite direktorij u koji želite spasiti:"
-
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr "Direktorij u koji želite spasiti"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CDROM / DVDROM"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "svakog sata"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "dnevno"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "sedmično"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "mjesečno"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "ručno izaberi"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Januar"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Februar"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Mart"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "April"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Maj"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Juni"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Juli"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "August"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Septembar"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Oktobar"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Novembar"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Decembar"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Nedjelja"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Ponedjeljak"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Utorak"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Srijeda"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Četvrtak"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Petak"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Subota"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Koristi demon"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Izaberite vremenski interval između svakog backupa"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "Vlastito podešavanje/crontab unos:"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Minuta"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Sat"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Dan"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Mjesec"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Dan u sedmici"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Molim izaberite medij za backup."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Molim budite sigurni da je cron demon aktiviran u vašim servisima."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-"Ako vaš računar nije stalno upaljen, možda ćete željeti instalirati anacron."
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr "Obratite pažnju da trenutno svi 'net' mediji takođe koriste hard disk."
-
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr "Molim izaberite vrstu kompresije"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Koristi .backupignore datoteke"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Pošalji mail izvještaj nakon svakog backupa na :"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "SMTP server za e-mail:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Obriši tar datoteke sa diska nakon backupa na drugi medij."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Šta"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Gdje"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Kada"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Više opcija"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "Odredište za backup nije podešeno..."
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Podešavanje Drakbackup-a"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Molim izaberite gdje želite backupovati"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "Hard disk koji će se koristiti za pripremu backupa za sve medije"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "preko mreže"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "na CDROMu"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "na Kasetnom uređaju"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Backup korisnika"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (Podrazumijevaju se svi korisnici)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Molim izaberite šta želite backupovati"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Backup sistema"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Ručno izaberite korisnika"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Molim izaberite podatke za backup..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Izvori backup-a: \n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- sistemske datoteke:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- korisničke datoteke:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- ostale datoteke:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- spasi na hard disku u direktoriju: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tOgraniči upotrebu diska na %s MB\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Obriši tar datoteke sa diska nakon backupa.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- Prži na CD"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr "na uređaju: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (više sesija)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Spasi na traku na uređaju: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tObriši=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr "\tBackup direktno na traku\n"
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- Spasi pomoću %s na računaru: %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t korisničko ime: %s\n"
-"\t\t u direktoriju: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opcije:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNe uključuj sistemske datoteke\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tBackupi koriste tar i bzip2\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBackupi koriste tar i gzip\n"
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tBackupi koriste samo tar\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\tKoristi datoteke .backupignore\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tŠalji mail na %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tKoristeći SMTP server %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Demon (%s) preko:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Hard disk.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Traka \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Mrežu preko FTPa.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Mrežu preko SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Mrežu preko rsync-a.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Bez podešavanja, molim kliknite na Čarobnjak ili Više opcija.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Lista podataka za vraćanje:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- Vrati sistemske datoteke.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - od datuma: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- Vrati korisničke datoteke: \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- Vrati ostale datoteke: \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Lista oštećenih podataka:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Molim isključite ili pobrišite ga idući put."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Backup datoteke su oštećene"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          Svi vaši izabrani podaci su          "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          uspješno spašeni na %s       "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "         Vrati konfiguraciju       "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "OK za vraćanje ostalih datoteka."
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Lista korisnika za vraćanje (samo najsvježiji datum po korisniku je značajan)"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "Molim izaberite datum za vraćanje:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Vrati sa hard diska"
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Unesite direktorij gdje su smješteni backupi"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr "Direktorij sa backupom"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Izaberite drugi medij za vraćanje"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Drugi medij"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Vrati sistem"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Vrati korisnike"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Vrati ostalo"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "izaberite stazu za vraćanje (umjesto / )"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "Put u koji treba vratiti"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Izvrši novi backup prije vraćanja (samo za inkrementalni backup.)"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "Pobriši korisničke direktorije prije vraćanja."
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr "Dio teksta koji se traži u imenu datoteke (prazan string vraća sve):"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "Pretraži backupe"
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "Nije pronađen nijedan rezultat..."
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Vrati izabrano"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-"Kliknite datum/vrijeme da vidite backup datoteke.\n"
-"Ctrl+kliknite datoteke da ih izaberete više odjednom."
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"Vrati izabrane\n"
-"stavke katologa"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Vrati izabrane\n"
-"datoteke"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "Backup datoteke nisu pronađene na %s."
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Vrati sa CDa"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Ubacite CD sa oznakom %s u CD\n"
-"jedinicu pod tačkom montiranja /mnt/cdrom"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Neispravna oznaka CDa. Oznaka diska je %s."
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Vrati sa trake"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Ubacite traku sa oznakom %s u kasetni\n"
-"uređaj %s"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Neispravna oznaka trake. Oznaka je %s."
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Vrati putem mreže"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restore putem mrežnog protokola: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Ime računara"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Staza ili modul računara"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Potrebna šifra"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Potrebno korisničko ime"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Potrebno ime računara"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Potrebna je staza ili modul"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "Vraćene datoteke..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Vraćanje nije uspjelo..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "%s nije dobavljen..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Izaberite datoteke za vraćanje"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Vrati sve backupe"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Ručno vraćanje"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Vrati iz kataloga"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Ne mogu naći backupe za vraćanje...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Provjerite da li je %s ispravan put?"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " a CD je u pogonskoj jedinici"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-"Backupi na mediju koji se ne može montirati - Koristite Katalog za vraćanje"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "CD na mjestu - nastavljam."
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "Browse to new restore repository."
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr "Direktorij iz kojeg treba vratiti"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Napredak vraćanja"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Izgradi backup"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Vrati"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Sljedeći paketi trebaju biti instalirani:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Molim izaberite podatke za vraćanje..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Backup sistemskih datoteka"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Backup korisničkih datoteka"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Backup ostalih datoteka"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Ukupan napredak"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "Šaljem datoteke putem FTPa"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Šaljem datoteke..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Backup-uj sada iz konfiguracijske datoteke"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Pogledaj postavke backupa."
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Čarobnjak za podešavanje"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Napredno podešavanje"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Pogledaj konfiguraciju"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "Pogledaj zadnji log"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Backup-uj sada"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nije pronađena konfiguraciona datoteka \n"
-"molim kliknite na Čarobnjak ili Više opcija."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Datoteka"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Datoteka/_Izlaz"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"Vaš sistemski bootloader nije u framebuffer modu. Da aktivirate grafički "
-"boot, izaberite grafički video režim iz alata za podešavanje bootloadera."
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "Želite li ga sada podesiti ?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Instaliraj teme"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Izbor grafičke boot teme"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Tema"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Tema prikaza\n"
-"pod konzolom"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Napravi novu temu"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Korisnik"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Desktop"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Ne, ne želim da se automatski prijavim"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Da, želim da se automatski prijavim sa ovim vrijednostima (korisnik, desktop)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Sistemske opcije"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Pokreni X-Window sistem na startu"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-"Molim izaberite video režim, on će biti primjenjen na svaku od boot stavki "
-"izabranih ispod.\n"
-"Provjerite da li vaša video kartica podržava taj režim prije nego što "
-"izaberete!"
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Mandriva Linux alat za prijavu bugova"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Mandriva Linux Kontrolni centar"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Alat za sinhroniziranje"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Samostalni alati"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Udaljena kontrola"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Upravljanje programima"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Alat za Windows migraciju"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Čarobnjaci za podešavanje"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr "Izaberite Mandriva alat:"
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"ili Ime programa\n"
-"(ili puni put):"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Nađi paket"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Paket:"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"Da prijavite bug, kliknite na dugme Prijavi.\n"
-"Ovo će otvoriti prozor web browsera na adresi %s gdje ćete pronaći formular "
-"koji treba popuniti. Gore prikazane informacije će biti poslane na taj "
-"server.\n"
-"Korisne stvari koje možete uključiti u vaš izvještaj su izlaz naredbe lspci, "
-"verzija kernela i sadržaj datoteke /proc/cpuinfo."
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Izvještaj"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Nije instaliran"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Paket nije instaliran"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "nije definisana"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Promijenite vremensku zonu"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Vremenska zona - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Da li je vaš hardverski sat podešen na GMT?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "Network Time Protocol"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"Vaš računar može sinhronizovati svoj sat\n"
-"sa vremenskim serverom koristeći NTP"
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Uključi Network Time Protocol"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Server:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr "Ne mogu sinhronizovati sa %s."
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Poništi"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Potrebno je instalirati paket ntp\n"
-" da bi se aktivirao Network Time Protocol\n"
-"\n"
-"Želite li instalirati ntp ?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Podešavanje mreže (%d adaptera)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Interfejs:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Molim sačekajte"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Interfejs"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Status"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Ime računara: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Podesi ime računara..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "Podešavanje LANa"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Podesi Lokalnu mrežu..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Primjeni"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Upravljajte vezama"
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr "Izabrani uređaj"
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "Podešavanje IPa"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "DNS serveri"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Domene za pretragu"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "statička"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Kontrola toka"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Prekid linije"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Istek vremena modema"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Koristi lock datoteku"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Čekaj zvuk slobodne linije prije biranja"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "Busy wait"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "Zvuk modema"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Uključi"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Isključi"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Klasa medija"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Naziv modula"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "MAC adresa"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Sabirnica"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Lokacija na sabirnici"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Na vašem sistemu nije pronađen nijedan ethernet mrežni adapter. Molim "
-"pokrenite alat za podešavanje hardware-a."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Uklonite mrežni interfejs"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Izaberite mrežni interfejs za uklanjanje"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Došlo je do greške prilikom brisanja interfejsa \"%s\":\n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "Čestitamo, mrežni interfejs \"%s\" je uspješno obrisan"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "Bez IP"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Bez maske"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "podignut"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "spušten"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Konektovan"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Nije konektovan"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Prekini konekciju..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Konektuj se..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, možda preko vaše mreže"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "Zaustavi sada"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "Pokreni sada"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemate nijedan podešen interfejs.\n"
-"Podesite ih prvo klikajući na 'Podesi'"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "Podešavanje LANa"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Boot protokol"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Pokrenut na bootu"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Interfejs još nije podešen.\n"
-"Pokrenite asistent \"Dodaj interfejs\" iz Mandriva Linux Kontrolnog centra"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Niste podesili nijednu Internet konekciju.\n"
-"Pokrenite asistent \"%s\" iz Mandriva Linux Kontrolnog centra"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Podesite novi mrežni interfejs (LAN, ISDN, ADSL, ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Podešavanje Internet konekcije"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "Treći DNS server (opcionalno)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Podešavanje Internet konekcije"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Pristup Internetu"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Tip konekcije: "
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Status:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr "GDM (GNOME Display Manager)"
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr "KDM (KDE Display Manager)"
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr "MdkKDM (Mandriva Linux Display Manager)"
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr "XDM (X Display Manager)"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Izbor display managera"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 Display Manager vam omogućuje da se grafički prijavite na vaš sistem uz "
-"pokretanje X Window Systema, a podržava i nekoliko različitih X sesija na "
-"vašem lokalnom računaru u isto vrijeme."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Izmjena je primijenjena, želite li sada restartovati servis dm?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-"Sada ćete zatvoriti sve pokrenute programe i izgubiti vašu sesiju. Da li ste "
-"stvarno sigurni da želite restartovati dm servis ?"
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "Pravljenje boot diskete"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Općenito"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Uređaj"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Kernel verzija"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Opcije"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Napredne opcije"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Veličina"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Mkinitrd opcionalni argumenti"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "prisili"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "izostavi raid module"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "ako je potrebno"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "izostavi scsi module"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Dodaj modul"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Ukloni modul"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Provjerite da li je ubačena disketa za ovaj uređaj %s"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Nema medija ili je zabranjeno pisanje na medij za uređaj %s.\n"
-"Molim ubacite neki medij."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ne mogu izvrsiti fork: %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Pravljenje floppy-ja završeno"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "Pravljenje boot diskete je uspješno završeno \n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Ne mogu ispravno zatvoriti mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Pretraži instalirane fontove"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Isključi instalirane fontove"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "obradi sve fontove"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "Nije pronađen nijedan font"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "gotovo"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "Ne mogu naći nijedan font na montiranim particijama"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Ponovo izaberi ispravne fontove"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "Ne mogu naći nijedan font.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Pretraži fontove na listi instaliranih"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "konverzija %s fontova"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Kopiranje fontova"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Instalacija True Type fontova"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "molim sačekajte tokom ttmkfdir..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "Završena True Type instalacija"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "type1inst kreiranje"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referenciranje"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Onemogući privremene datoteke"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Restartuj XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Onemogući datoteke fontova"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "restart xfs-a"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Prije instaliranja fontova, provjerite da li imate dozvole da ih koristite i "
-"instalirate na va[em sistemu.\n"
-"\n"
-"-Možete instalirati fontove koristeći uobičajen način. U rijetkim "
-"slučajevima, neispravni fontovi mogu zaglaviti vaš X Server."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Lista fontova"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "O programu"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Deinstaliraj"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Uvezi"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (originalna verzija)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"Zahvale:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Pretvara Windows .pfm  datoteke u .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generiše datoteke fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Pretvara ttf font datoteke u afm i pfb fontove\n"
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Izaberite programe koji će podržavati fontove :"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Razni štampači"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Izaberite font datoteku ili direktorij i kliknite na 'Dodaj'"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Izbor datoteka"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Uvoz fontova"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Instaliraj fontove"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "kliknite ovdje ako ste sigurni."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "ovdje ako ne."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Ništa izabrano"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Sve izabrano"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Pobriši listu"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "Uvoz fontova"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Probni inicijali"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopiraj fontove na sistem"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instaliraj i konvertuj fontove"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Post Install"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Pobriši fontove sa mog sistema"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Post Uninstall"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Dijeljenje Internet konekcije"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Žalim, podržavamo samo kernel 2.4 i iznad."
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Dijeljenje Internet konekcije je trenutno neaktivno"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"neaktivno (isključeno).\n"
-"\n"
-"Šta želite uraditi?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "uključi"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "rekonfiguriši"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "otkaži"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Uključujem servere..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Dijeljenje Internet konekcije je sada uključeno."
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Dijeljenje Internet konekcije je trenutno aktivno"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Dijeljenje Internet konekcije je već podešeno. Trenutno je\n"
-"aktivno.\n"
-"\n"
-"Šta želite uraditi?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "isključi"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Isključujem servere..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Dijeljenje Internet konekcije je sada isključeno."
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sada ćete konfigurisati vaš računar za dijeljenje Internet konekcije.\n"
-"Sa ovom opcijom, ostali računari na vašoj lokalnoj mreži će moći koristiti "
-"Internet konekciju ovog računara. \n"
-"\n"
-"Prije nego što nastavite, provjerite da li ste podesili vaš mrežni/internet "
-"pristup koristeći drakconnect.\n"
-"\n"
-"Napomena: potreban vam je poseban Mrežni adapter da biste podesili Lokalnu "
-"mrežu (LAN)."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfejs %s (koristeći modul %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Interfejs %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Nema mrežnog adaptera na vašem sistemu!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Mrežni interface"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Trenutno je samo jedan mrežni adapter podešen na vašem sistemu:\n"
-"\n"
-"%s\n"
-"\n"
-"Sada ću podesiti vašu Lokalnu mrežu sa ovim adapterom."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Izaberite mrežni interface"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Molim izaberite koji mrežni adapter će biti spojen na vašu Lokalnu mrežu."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Mrežni interfejs je već podešen"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Upozorenje, mrežni adapter (%s) je već podešen.\n"
-"\n"
-"Da li želite automatsko ponovno podešavanje?\n"
-"\n"
-"To možete obaviti ručno, ali morate znati šta radite."
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatsko ponovno podešavanje"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "Ne (samo eksperti)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Prikaži postavke trenutnog interfejsa"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Postavke trenutnog interfejsa"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Trenutna konfiguracija `%s':\n"
-"\n"
-"Mreža: %s\n"
-"IP adresa: %s\n"
-"IP atributi: %s\n"
-"Drajver: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Mogu zadržati trenutnu konfiguraciju i pretpostaviti da ste već podesili "
-"DHCP server; u tom slučaju molim provjerite da li sam ispravno pročitao "
-"Mrežnu adresu koju ćete koristiti na lokalnoj mreži; neću je ponovo podesiti "
-"i neću mijenjati vaše postavke DHCP servera.\n"
-"\n"
-"Predložena DNS postavka je Caching nameserver koji je podešen na firewallu. "
-"Možete je zamijeniti npr. IP adresom DNS servera vašeg ISPa.\n"
-"\t\t       \n"
-"Ako ne, mogu ponovo podesiti vaš interfejs i podesiti DHCP server za vas.\n"
-"\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Lokalna mrežna adresa"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"Podešavanje DHCP servera.\n"
-"\n"
-"Ovdje možete izabrati različite opcije za podešavanje DHCP servera.\n"
-"Ako ne znate značenje neke opcije, jednostavno je ostavite kako jeste."
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP adresa (ovog) DHCP servera"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "IP adresa DNS servera"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Interno domensko ime"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "Početak DHCP raspona"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "Kraj DHCP raspona"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Podrazumjevani lease (u sekundama)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maksimalni lease (u sekundama)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ponovo podesi interfejs i DHCP server"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalna mreža se ne završava sa `.0', izlazim."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Potencijalan konflikt LAN adresa pronađen u trenutnoj konfiguraciji %s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Podešavam..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Podešavam skripte, instaliram software, pokrećem servere..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemi tokom instaliranja paketa %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Sve je konfigurisano.\n"
-"Sada možete dijeliti Internet konekciju sa ostalim računarima na vašoj "
-"lokalnoj mreži, koristeći automatsku mrežnu konfiguraciju (DHCP) i\n"
-"transparentni proxy cache server (SQUID)."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"Ovo je slobodan softver i može se distribuirati pod uslovima GNU GPLa.\n"
-"\n"
-"Upotreba: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - prikazuje ovu pomoć     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_label>       - učitaj HTML help stranicu koja se odnosi na "
-"id_label\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-" --doc <link>          - link na drugu web stranicu ( za WM pozdravni "
-"ekran)\n"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Mandriva Linux Centar za pomoć"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"Ne mogu prikazati %s \n"
-". Nema datoteke za Pomoć pod ovim imenom\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Sistemske postavke"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Vlastite postavke"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Vlastito i sistemske postavke"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Izmjenljivo"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Staza"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Korisnik"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Grupa"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Privilegije"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Izmijeni trenutno pravilo"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Ovdje možete pregledati datoteke koje se koriste radi promjene privilegija, "
-"vlasnika i grupa putem msec-a.\n"
-"Možete također stvoriti vaša vlastita pravila koja će prepisati ranije "
-"podešena pravila."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"Trenutni nivo sigurnisti je %s.\n"
-"Izaberite koje privilegije želite vidjeti/izmijeniti"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Gore"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Pomjeri izabrano pravilo za jedan nivo gore"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Dolje"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Pomjeri izabrano pravilo dole za jedan nivo"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Dodaj pravilo"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Dodaj novo pravilo na kraj"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Obriši izabrano pravilo"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Izmijeni"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "pregledaj"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "korisnik"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "grupa"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "ostali"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Čitaj"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "Omogući \"%s\" da čita datoteku"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Zapiši"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "Omogući \"%s\" da piše u datoteku"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Izvrši"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Uključite \"%s\" da izvršite datoteku"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Koristi se za direktorij:\n"
-" samo vlasnik tog direktorija ili datoteke u ovom direktoriju ga može "
-"obrisati"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Koristi id vlasnika za izvršavanje"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Koristi id grupe za izvršavanje"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Korisnik :"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Grupa :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Trenutni korisnik"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "Kada je uključeno, vlasnik i grupa se ne mogu promijeniti"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Izbor staze"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Osobina"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Podešavanje PXE servera"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Podešavanje instalacionog servera"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sada ćete podesiti instalacioni server, koji se sastoji od PXE servera (DHCP "
-"servera) i TFTP servera.\n"
-"Sa ovom opcijom, moći ćete instalirati Mandriva Linux na druge računare na "
-"vašoj lokalnoj mreži koristećiovaj računar kao izvor.\n"
-"\n"
-"Prije nego što nastavite, provjerite da li ste podesili mrežni/internet "
-"pristup koristeći drakconnect.\n"
-"\n"
-"Napomena: potreban vam je poseban Mrežni adapter da biste podesili Lokalnu "
-"mrežu (LAN)."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Molim izaberite koji mrežni interfejs želite koristiti za spajanje na DHCP "
-"server."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfejs %s (na mreži %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP server omogućuje pokretanje drugih računara koristeći PXE u zadatom "
-"rasponu adresa.\n"
-"\n"
-"Mrežna adresa je %s koristeći netmasku %s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "Početna DHCP adresa"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "Krajnja DHCP adresa"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Molim navedite gdje se nalazi instalaciona slika.\n"
-"\n"
-"Ako nemate postojeći direktorij, molim kopirajte sadržaj CDa ili DVDa.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Direktorij instalacionog image-a"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Nije pronađen nijedan image"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Nije pronađena nijedna CD ili DVD slika, molim kopirajte instalacioni "
-"program i rpm datoteke."
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Molim navedite gdje se nalazi datoteka auto_install.cfg.\n"
-"\n"
-"Ostavite ovo praznim ako ne želite podesiti režim automatske instalacije.\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Lokacija datoteke auto_install.cfg"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Mode"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Kanal"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Mreža:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Mod (Način):"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Kriptovanje:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Signal:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "isključen"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Spoji se"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Rescan"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Status"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Prekini vezu"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Osvježi"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "uključen"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "SVE"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "LOCAL"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Ignoriši"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"Ovdje možete podesiti nivo sigurnosti i administratora ovog računara.\n"
-"\n"
-"\n"
-"'<span weight=\"bold\">Sigurnosni administrator</span>' je onaj koji će "
-"dobijati sigurnosna upozorenja\n"
-"ako je aktivna opcija '<span weight=\"bold\">Sigurnosna upozorenja</span>'. "
-"Ovo može biti korisničko\n"
-"ime ili e-mail.\n"
-"\n"
-"\n"
-"Meni '<span weight=\"bold\">Nivo sigurnosti</span>' vam omogućuje da "
-"izaberete jedan od šest gotovih\n"
-"nivoa sigurnosti koje pruža msec. Ovi nivoi imaju raspon od '<span weight="
-"\"bold\">slabe</span>'\n"
-"sigurnosti i jednostavnog korištenja, do '<span weight=\"bold\">paranoidnih</"
-"span>' postavki, prikladnih za\n"
-"vrlo osjetljive serverske primjene:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Slab</span>: Ovo je potpuno neupotrebljiv\n"
-"nivo sigurnosti, ali lagan za upotrebu. Treba ga koristiti samo na "
-"računarima\n"
-"koji nisu spojeni na mrežu i koji nisu dostupni svakome.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standardan</span>: Ovo je standardna\n"
-"sigurnost koja se preporučuje za računar koji će biti korišten za spajanje\n"
-"na Internet kao klijent.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Visok</span>: Postoje već neka\n"
-"ograničenja, a automatizovane provjere se vrše svake noći.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Viši</span>: Sigurnost je sada dovoljno\n"
-"visoka da bi se sistem mogao koristiti kao server koji prihvata konekcije\n"
-"od mnogih klijenata. Ako je vaš računar samo klijent na Internetu, trebali\n"
-"biste izabrati niži nivo.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoičan</span>: Ovo je slično kao\n"
-"prethodni nivo, ali je sistem potpuno zatvoren i sigurnosne mogućnosti\n"
-"su na maksimumu."
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Opis polja:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr " (default vrijednost: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Nivo sigurnosti:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Sigurnosni administrator:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Osnovne opcije"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Mrežne opcije"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Sistemske opcije"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Periodične provjere"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Molim sačekajte, podešavam nivo sigurnosti..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Molim sačekajte, podešavam sigurnosne opcije..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Nije izabrana zvučna kartica!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Nije pronađena nijedna zvučna kartica na vašoj mašini. Molim provjerite da "
-"li je ispravno spojena zvučna kartica koja je podržana pod Linuxom.\n"
-"\n"
-"\n"
-"Možete posjetiti našu bazu hardvera na:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Napomena: ako imate ISA PnP zvučnu karticu, moraćete koristiti alsaconf ili "
-"sndconfig program.  Samo ukucajte \"alsaconf\" ili \"sndconfig\" na konzoli."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"za dovršavanje podešavanja potreban je paket 'ImageMagick'.\n"
-"Kliknite na \"U redu\" da instalirate 'ImageMagick' ili \"Odustani\" za izlaz"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"x koordinata tekst polja\n"
-"u broju znakova"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"y koordinata tekst polja\n"
-"u broju znakova"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "širina teksta"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "visina tekst polja"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"koordinate progresne trake x\n"
-"tj. njenog lijevog ugla"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"koordinate progresne trake y\n"
-"tj. njenog lijevog ugla"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "širina progresne trake"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "visina progresne trake"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Prikaži logo na konzoli"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Naziv teme"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "krajnja rezolucija"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "Snimi temu"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "snimam Bootsplash temu..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "izaberite image"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Izbor boje trake napretka"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr "Spojen putem serijskog porta ili USB kabla"
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "Dodaj UPS uređaj"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Dobro došli u program za podešavanje UPSa.\n"
-"\n"
-"Ovdje možete dodati novi UPS na vaš sistem.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-"Sada ćemo dodati UPS uređaj.\n"
-"\n"
-"Želite li da probam automatski otkriti UPS uređaje spojene na ovaj računar "
-"ili da ih ručno izaberete?"
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "Auto prepoznavanje"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Detekcija u toku"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Čestitamo"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "Čarobnjak je uspješno dodao sljedeće UPS uređaje:"
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "Nije pronađen nijedan novi UPS uređaj"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "Podešavanje UPS drajvera"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "Molim izaberite vaš UPS model."
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "Proizvođač / model:"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-"Sada podešavamo UPS \"%s\" od \"%s\".\n"
-"Molim unesite njegovo ime, drajver i port."
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Ime:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr "Naziv vašeg UPSa"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr "Drajver koji upravlja vašim UPSom"
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Port:"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "Port na koji je spojen vaš UPS"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "Čarobnjak je uspješno podesio novi \"%s\" UPS uređaj."
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "UPS uređaji"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Ime"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "UPS korisnici"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr "Liste kontrole pristupa"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr "IP maska"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Pravila"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Akcija"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Nivo"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "Naziv ACLa"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUPS"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Dobrodošli u alate za podešavanje UPSa"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "VPN veza je aktivirana."
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Podešavanje VPN veze je već završeno.\n"
-"\n"
-"Ona je trenutno aktivna.\n"
-"\n"
-"Šta želite uraditi?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "Isključujem VPN..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "VPN veza je sada isključena."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "VPN veza je trenutno neaktivna"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Podešavanje VPN veze je već završeno.\n"
-"\n"
-"Ona je trenutno neaktivna (isključena).\n"
-"\n"
-"Šta želite uraditi?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "Uključujem VPN..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "VPN veza je sada uključena."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "Jednostano podešavanje VPNa."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-"Sada ćete podesiti vaš računar da koristi VPN vezu.\n"
-"\n"
-"Pomoću ove mogućnosti računari na vašoj lokalnoj mreži\n"
-"i računari u nekoj drugoj lokalnoj mreži mogu dijeliti resurse\n"
-"kroz svoje odgovarajuće firewalle, preko Interneta, na siguran način.\n"
-"\n"
-"Komunikacija preko Interneta je šifrovana. Lokalni i udaljeni računari\n"
-"se ponašaju kao da se nalaze u istoj mreži.\n"
-"\n"
-"Provjerite da li ste podesili vaš mrežni/Internet pristup koristeći\n"
-"drakconnect prije nego što nastavite."
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-"VPN veza.\n"
-"\n"
-"Ovaj program je baziran na sljedećim projektima:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - dokumentacija i man stranice uz paket %s\n"
-"\n"
-"Molim pročitajte NAJMANJE ipsec-howto dokumentaciju\n"
-"prije nego što nastavite."
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Kernel modul."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-"Kernel mora imati ipsec podršku.\n"
-"\n"
-"Vi trenutno koristite kernel verziju %s.\n"
-"\n"
-"Ovaj kernel ima podršku za '%s'."
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Sigurnosna politika"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "IKE daemon racoon"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Konfiguraciona datoteka"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-"Prvi korak u konfiguraciji !\n"
-"\n"
-"Morate podesiti sigurnosnu politiku, a zatim podesiti\n"
-"demon za automatsku razmjenu ključeva (IKE). KAME IKE\n"
-"demon koji mi koristimo se zove 'racoon'.\n"
-"\n"
-"Šta želite podesiti ?\n"
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s stavki"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-"Sadržaj datoteke %s\n"
-"je podijeljen u sekcije.\n"
-"\n"
-"Sada možete:\n"
-"\n"
-"  - prikazati, dodati, izmijeniti ili obrisati sekcije, a zatim\n"
-"  - primijeniti izmjene\n"
-"\n"
-"Šta želite uraditi ?\n"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Prikaz"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Primijeni"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Podešavanje prikaza"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-"Datoteka %s ne postoji.\n"
-"\n"
-"Ovo je vjerovatno nova konfiguracija.\n"
-"\n"
-"Morate se vratiti nazad i izabrati 'Dodaj'.\n"
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "Stavke ipsec.conf"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"Datoteka %s sadrži razne sekcije.\n"
-"\n"
-"Ovo je kostur:\t'config setup' \t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"Sada možete dodati neke od ovih sekcija.\n"
-"\n"
-"Izaberite sekciju koju želite dodati.\n"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "config setup"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "normal conn"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Već postoji !"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-"Sekcija pod ovim imenom već postoji.\n"
-"Imena sekcija moraju biti jedinstvena.\n"
-"\n"
-"Moraćete se vratiti nazad i dodati novu sekciju\n"
-"ili izmijeniti njeno ime.\n"
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Ova sekcija se mora nalaziti na početku vaše\n"
-"%s datoteke.\n"
-"\n"
-"Provjerite da li ostale sekcije slijede ovu\n"
-"config setup sekciju.\n"
-"\n"
-"Izaberite dalje ili nazad kada završite.\n"
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "interfejsi"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsdebug"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "plutodebug"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "plutoload"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "plutostart"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "uniqueids"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-"Ovo je prva sekcija nakon sekcije config\n"
-"setup.\n"
-"\n"
-"Ovdje definišete podrazumijevane postavke. \n"
-"Sve ostale sekcije slijede ovu. Postavke lijevo\n"
-"su opcionalne. Ako ih ne definišete ovdje,\n"
-"globalno, možete ih definisati zasebno u \n"
-"svakoj sekciji.\n"
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "left"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Vaša datoteka %s sadrži nekoliko sekcija, ili konekcija.\n"
-"\n"
-"Sada možete dodati novu sekciju.\n"
-"Izaberite Dalje kada završite sa pisanjem podataka.\n"
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "section name"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "auto"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "right"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "rightcert"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-"Sekcija pod ovim imenom već postoji.\n"
-"Imena sekcija moraju biti jedinstvena.\n"
-"\n"
-"Moraćete se vratiti nazad i dodati još jednu\n"
-"sekciju ili izmijeniti ime sekcije.\n"
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Dodaj sigurnosnu pravilo.\n"
-"\n"
-"Sada možete dodati sigurnosno pravilo.\n"
-"\n"
-"Izaberite Dalje kada završite sa pisanjem podataka.\n"
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Izmijeni sekciju"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-"Vaša datoteka %s sadrži nekoliko sekcija ili konekcija.\n"
-"\n"
-"Ovdje možete izabrati one koje želite izmijeniti i zatim\n"
-"kliknite na Dalje.\n"
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Imena sekcija"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "Ne mogu izmijeniti!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-"Ne možete mijenjati ovu sekciju.\n"
-"\n"
-"Ova sekcija je obavezna za FreeSwan 2.X.\n"
-"Morate navesti verziju 2.0 na početku datoteke\n"
-"%s i, eventualno, isključiti ili uključiti oportunističku\n"
-"enkripciju.\n"
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Vaša datoteka %s sadrži nekoliko sekcija.\n"
-"\n"
-"Sada možete izmijeniti stavke sekcije config setup.\n"
-"Kliknite na Dalje kada završite da bi se podaci zapisali.\n"
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Pobriši sekciju"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "racoonf.conf stavke"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "path"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "remote"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "path type"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "real file"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "path_type"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr "Sainfo izvorna adresa"
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr "Sainfo izvorni protokol"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr "Sainfo odredišna adresa"
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr "Sainfo odredišni protokol"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "PFS grupa"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "Lifetime number"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "Lifetime unit"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "Algoritam autentikacije"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "Algoritam kompresije"
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr "deflate"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Udaljeni"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr "Exchange mode"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "Generate policy"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "Passive"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "Certificate type"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "My certfile"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "Naziv certifikata"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "Moj privatni ključ"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "Ime privatnog ključa"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr "Peers certfile"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr "Name of the peers certificate"
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "Provjeri certifikat"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "Moj identifikator"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr "Peers identifier"
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr "Proposal"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "Hash algorithm"
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "DH group"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Command"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "Source IP range"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "Destination IP range"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "Upper-layer protocol"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "bilo koji"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Flag"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Direction"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "IPsec policy"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "ipsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr "poništi"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr "tunel"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr "transport"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Source/destination"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr "zahtijeva"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "uobičajeno"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "koristi"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "jedinstveno"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "USA (kablovska)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kablovska)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (broadcast)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kablovska)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "Kina (broadcast)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Zapadna Evropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Istočna Evropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Francuska [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Novi Zeland"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australijska Optus kablovska TV"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Molim,\n"
-"unesite vaš tv standard i državu"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "TV standard :"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Oblast :"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Pretraga TV kanala je u toku ..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "Tražim TV kanale"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Došlo je do greške kod pretrage TV kanala"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Have a nice day!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Sada možete pokrenuti xawtv (pod X Window sistemom!) !\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Nije detektovana TV kartica!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Na vašem računaru nije detektovana TV kartica. Molim provjerite da li je "
-"ispravno priključena Video/TV kartica koja je podržana pod Linuxom.\n"
-"\n"
-"\n"
-"Možete posjetiti našu bazu hardvera na:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Alternativni drajveri"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "spisak alternativnih drajvera za ovu zvučnu karticu"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"ovo je fizička sabirnica na koju je uređaj priključen (npr: PCI, USB, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Identifikacija sabirnice (busa)"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- PCI i USB uređaji: ovo će izlistati PCI/USB id-ove za; vendor, device, "
-"subvendor i subdevice"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- pci devices: ovo daje PCI slot, uređaj i funkciju ove kartice\n"
-"- eide devices: uređaj može biti master ili slave\n"
-"- scsi devices: SCSI id-ovi za: bus i device"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "Kapacitet uređaja"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "posebne mogućnosti drajvera (mogućnost prženja i/ili podrška za DVD)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "ovo polje opisuje uređaj"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Stara datoteka uređaja"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "staro statičko ime uređaja koje koristi dev paket"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Novi devfs uređaj"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "novo dinamičko ime uređaja koje generiše kernelov devfs"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Modul"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modul Linux kernela koji upravlja uređajem"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "Proširene particije"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "broj proširenih particija"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Geometrija"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr "CHS (cilindar/glava/sektor) geometrija diska"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "Disk kontroler"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr "disk kontroler na strani računara"
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "klasa hardverskog uređaja"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Model"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "model hard diska"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "port mrežnog štampača"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "Primarne particije"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "broj primarnih particija"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "naziv proizvođača uređaja"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "Bus PCI #"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "PCI sabirnica na koju je uređaj priključen"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "PCI uređaj #"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "Broj PCI uređaja"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr "PCI funkcija #"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr "Broj PCI funkcije"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "ID proizvođača"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr "ovo je standardni numerički identifikator proizvođača"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "ID uređaja"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "ovo je numerički identifikator uređaja"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr "Pod-ID proizvođača"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr "ovo je manji numerički identifikator proizvođača"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr "Pod-ID uređaja"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "ovo je manji numerički identifikator uređaja"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "USB ID uređaja"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"GNU/Linux kernel mora izvršiti proračunsku petlju prilikom boot-a kako bi "
-"inicijalizirao tajmer.  Rezultat rada te petlje se prikazuje u vidu "
-"bogomipsa, kao jedan neprecizan pokazatelj brzine CPUa."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Veličina cache-a"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "veličina CPU keša (drugog nivoa)"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "da li ovaj CPU ima Cyrix 6x86 Coma bug"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid familija"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "familija CPUa (npr: 6 za i686 generaciju)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Nivo cpuid-a"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "nivo informacija koje se mogu dobiti cpuid instrukcijom"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvencija (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"frekvencija CPUa u MHz (Megaherc je jedinica koja se može približno "
-"usporediti sa brojem instrukcija koje CPU izvršava u sekundi)"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Flagovi"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flagovi koje je prijavio kernel"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv bug"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"Rani Intel Pentium procesori imaju bug u numeričkom koprocesoru koji ne "
-"postiže potrebnu preciznost prilikom izvršavanja dijeljenja sa tekućim "
-"zarezom (FDIV)"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "Da li postoji FPU"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "da znači da procesor ima aritmetički koprocesor"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Da li FPU ima IRQ vektor"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "da znači da aritmetički koprocesor ima priključen exception vector"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "F00F bug"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"rani Pentium procesori imaju bug koji izaziva smrzavanje sistema prilikom "
-"dekodiranja F00F bytecode-a"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "Halt bug"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Neki rani i486DX-100 chipovi se ne mogu pouzdano vratiti u radni način nakon "
-"korištenja instrukcije \"halt\""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "podgeneracija procesora"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "generacija procesora (npr: 8 za Pentium III, ...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Naziv modela"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "zvanično ime proizvođača procesora"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "naziv procesora"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "ID procesora"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "broj procesora"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Model stepping"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "stepping procesora (broj pod-modela / generacije)"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "naziv proizvođača procesora"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Zaštita od pisanja"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"WP flag u CR0 registru CPUa prisiljava zaštitu od pisanja na nivou "
-"memorijske stranice, čime je uključeno sprječavanje od neprovjerenih "
-"pristupa kernela u korisničku memoriju (drugim riječima, ovo je zaštita od "
-"bugova)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Format diskete"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "format disketa koje podržava jedinica"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI channel"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr "Identifikator diska"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr "obično serijski broj diska"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr "Broj logičke jedinice"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-"SCSI odredišni broj (LUN). SCSI uređaji spojeni na računar su jedinstveno "
-"identificirani\n"
-"brojem kanala, odredišnim IDom i brojem logične jedinice"
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "Instalirana veličina"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr "Instalirana veličina memorijske banke"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr "Omogućena veličina"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr "Omogućena veličina memorijske banke"
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "vrsta memorijskog uređaja"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Brzina"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr "Brzina memorijske banke"
-
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr "Veze memorijske banke"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr "Oznaka podnožja (socketa) memorijske banke"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "Datoteka uređaja"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-"datoteka uređaja koja se koristi za komunikaciju sa kernelskim drajverom miša"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr "Simulirani točkić"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "da li je točkić simuliran ili ne"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "vrsta miša"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "naziv miša"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Broj dugmadi"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "broj dugmadi koje ima miš"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "vrsta sabirnice na koju je spojen miš"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr "Protokol miša koji koristi X11"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr "protokol koji koristi grafički desktop sa mišem"
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Identifikacija"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Konekcija"
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr "Performanse"
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "Bugovi"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr "FPU"
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Particije"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Osobine"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Opcije"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Pomoć"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Automatski prepoznaj štam_pače"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Automatski prepoznaj _modeme"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Automatski prepoznaj _jaz uređaje"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Izlaz"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Opis polja"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake pomoć"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Nakon što izaberete uređaj, moći ćete vidjeti informacije o uređaju u "
-"poljima u desnom okviru (\"Informacije\")"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Prijavi grešku"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_O programu..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "O Harddrake-u"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Ovo je HardDrake, %s alat za podešavanje hardvera.\n"
-"<span foreground=\"royalblue3\">Verzija:</span> %s\n"
-"<span foreground=\"royalblue3\">Autor:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "Harddrake2"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Detektovani hardver"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Podesi modul"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Pokreni alat za podešavanje"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "nepoznat"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Nepoznat"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Razno"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Kliknite na uređaj u drvetu lijevo da dobijete informacije o njemu."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "sekundarni"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "primarni"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "pržilica"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Račun:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Šifra:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Ime računara:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Molim izaberite izgled vaše tastature."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Želite li da BackSpace vrati Delete u konzoli?"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Izmjena je napravljena, ali da bi stupila na snagu morate se odjaviti"
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Dnevnici Mandriva Linux alata"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Prikaži samo za izabrani dan"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Datoteka/_Nova"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Datoteka/_Otvori"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Datoteka/_Sačuvaj"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Datoteka/Sačuvaj K_ao"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Datoteka/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Opcije/Test"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Pomoć/_O programu..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Authentication"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "User"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "Messages"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Syslog"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "pretraživanje"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Alat za pregled vaših logova"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Podešavanja"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "Odgovara"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "but not matching"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Izaberi datoteku"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Kalendar"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Sadržaj datoteke"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "Mail obavijest"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "Čarobnjak za upozorenja je neočekivano pao:"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "molim sačekajte, parsiram datoteku: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Server"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Domain Name Resolver"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "FTP server"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix mail server"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Samba server"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Webmin servis"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd servis"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "Podesi sistem za e-mail obavještenja"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "Zaustavi sistem za e-mail obavještenja"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Podešavanje Mail obavijesti"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Dobro došli u program za podešavanje maila.\n"
-"\n"
-"Ovdje možete podesiti sistem obavještavanja.\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Šta želite uraditi?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Postavke servisa"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Primićete obavještenje ako neki od izabranih servisa prestane raditi"
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "Podešavanje opterećenja"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Primićete upozorenje ako je opterećenje (system load) veće od ove vrijednosti"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Opterećenje"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "Postavke upozorenja"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Molim unesite vašu email adresu ispod"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr "i unesite ime (ili IP adresu) SMTP servera kojeg želite koristiti"
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "Čarobnjak je uspješno podesio e-mail obavještenja."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "Čarobnjak je uspješno isključio e-mail obavještenja."
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Sačuvaj kao..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Molim izaberite vrstu vašeg miša."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Emuliraj treće dugme?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Testiranje miša"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Molim testirajte miš:"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "Mreža je pokrenuta na interfejsu %s"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Mreža je zaustavljena na interfejsu %s. Kliknite na \"Podesi mrežu\""
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Konektuj se na %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Prekini konekciju na %s"
-
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr "Nadgledaj mrežu"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Podesi mrežu"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "interfejsi"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Profili"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "Dobijte pomoć online"
-
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr "Interaktivno otkrivanje upada u sistem"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Uvijek pokreni na startu"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr "Napad skeniranjem portova je pokušan sa %s."
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "Servis %s je napadnut sa %s."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr "Napad razvaljivanja šifre je pokušan sa %s."
-
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Aktivni firewall: otkriven pokušaj upada"
-
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Da li želite staviti napadača na crnu listu?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr "Uvijek stavljaj na listu (bez pitanja)"
-
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr "Detalji napada"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr "Vrijeme napada: %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Mrežni interfejs: %s"
-
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr "Vrsta napada: %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protokol: %s"
-
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr "IP adresa napadača: %s"
-
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr "Ime računara napadača: %s"
-
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr "Napadnuti servis: %s"
-
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr "Napadnuti port: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr "Vrsta ICMP napada: %s"
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Nadzor mreže"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "Globalne statistike"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "Istog trena"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Prosjek"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"Brzina\n"
-"slanja:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"Brzina\n"
-"prijema:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"Vrijeme\n"
-"konekcije: "
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr "Koristi isti omjer za primljeno i poslano"
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Molim sačekajte, probavam vašu konekciju..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "Prekidam vezu na Internet "
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "Spajam se na Internet "
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Prekid veze sa Internetom nije uspio."
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Prekid veze sa Internetom završen."
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Konekcija završena."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Konekcija nije uspjela.\n"
-"Provjerite konfiguraciju u Mandriva Linux Kontrolnom centru."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Podešavanje boje"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "poslano:"
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "primljeno:"
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "prosjek"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Lokalne mjere"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Upozorenje, otkrivena je druga Internet konekcija, možda preko vaše mreže"
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "Internet konekcije nije podešena"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Čitam podatke instaliranih štampača..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "%s Alat za upravljanje štampačima"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Akcije"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Dodaj štampač"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Postavi kao _Podrazumijevano"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Edituj"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Izbriši"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Ekspertni mod"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Osvježi"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Podešavanje CUPSa"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Pretraga:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Primijeni filter"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "Def."
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Naziv štampača"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Vrsta konekcije"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Ime servera"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Dodaj štampač"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Dodaj štampač na sistem"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Postavi kao podrazumijevano"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Podesi izabrani štampač kao podrazumjevani"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Izmijeni izabrani štampač"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Obriši izabrani štampač"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Osvježi listu"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "Podešavanje CUPSa"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "Podesite CUPS sistem štampe"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Uključen"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Isključen"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Autori: "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "Upravljanje štampačima %s"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"SANE paket treba biti instaliran da biste mogli koristiti skenere.\n"
-"\n"
-"Da li želite instalirati SANE pakete?"
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Prekidam Scannerdrake."
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-"Ne mogu instalirati pakete koji su potrebni za podešavanje skenera pomoću "
-"Scannerdrake-a."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Sada će biti pokrenut Scannerdrake."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Tražim podešene skenere ..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Tražim nove skenere ..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "Regeneriram listu podešenih skenera ..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "%s nije podržan na ovoj verziji %s."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s je pronađen na %s, da ga podesim automatski?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s nije u bazi skenera, želite li ga ručno podesiti?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Izaberite model skenera"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Detektovan model: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr " (NIJE PODRŽANO)"
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "%s nije podržan na Linuxu."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "Nemoj instalirati firmware datoteku"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-"Moguće je da vaš %s zahtijeva da firmware bude uploadovan svaki put kada ga "
-"upalite."
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "Ako je to slučaj, ovo se može obavljati automatski."
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"Da biste to uradili, morate navesti firmware datoteku za vaš skener kako bi "
-"ona mogla biti instalirana."
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"Datoteku možete naći na CDu ili disketi koja je došla uz skener, na web "
-"stranici proizvođača ili na vašoj Windows particiji."
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Instaliraj firmware datoteku iz"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Izaberite firmware datoteku"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "Firmware datoteka %s ne postoji ili se ne može čitati!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-"Moguće je da vaši skeneri zahtijevaju da firmware bude uploadovan svaki put "
-"kada ih upalite."
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-"Da biste to uradili, trebate navesti firmware datoteke za vaše skenere kako "
-"bi mogle biti instalirane."
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-"Ako ste već instalirali firmware vašeg skenera, možete ga updatovati ovdje "
-"tako što ćete zadati novu firmware datoteku."
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "Instaliraj firmware za"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "Izaberite firmware datoteku za %s"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Ne mogu instalirati firmware datoteku za %s!"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "Firmware datoteka za %s je uspješno instalirana."
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "%s nije podržan"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"%s se mora podesiti iz printerdrake-a.\n"
-"Možete pokrenuti printerdrake iz %s Kontrolnog centra u odjeljku Hardware."
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Auto prepoznavaj dostupne portove"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Molim izaberite uređaj gdje je priključen vaš %s"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Napomena: Paralelni portovi ne mogu biti automatski istraženi)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "izaberite uređaj"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Tražim skenere ..."
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "Podešavam module kernela..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "Pažnja!"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-"Vaš %s se ne može potpuno automatski podesiti.\n"
-"\n"
-"Potrebno je ručno prilagođavanje. Molim editujte datoteku /etc/sane.d/%s."
-"conf. "
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-"Više informacija je u priručniku drajvera. Izvršite naredbu \"man sane-%s\" "
-"da biste je pročitali."
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Nakon toga možete skenirati dokumente koristeći \"XSane\" ili \"Kooka\" koji "
-"se nalaze u meniju Multimedija/Grafika."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-"Vaš %s je podešen, ali je moguće da će biti potrebna dodatna ručna podešenja "
-"da bi radio. "
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-"Ako se ne pojavi na listi podešenih skenera u glavnom prozoru programa "
-"Scannerdrake ili ako ne bude radio ispravno, "
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "editujte konfiguracionu datoteku /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"Vaš %s je podešen.\n"
-"Sada možete skenirati dokumente koristeći \"XSane\" ili \"Kooka\" koji se "
-"nalaze u meniju Multimedija/Grafika."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Sljedeći skeneri\n"
-"\n"
-"%s\n"
-"su dostupni na vašem sistemu.\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"Sljedeći skener\n"
-"\n"
-"%s\n"
-"je dostupan na vašem sistemu.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Nisam pronašao nijedan skener na vašem sistemu.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Traženje novih skenera"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Ručno dodaj skener"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Instaliraj/Updatuj firmware datoteke"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Dijeljenje skenera"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Svi udaljeni računari"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Na ovom računaru"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Ovdje možete izabrati da li skeneri spojeni na ovaj računar trebaju biti "
-"dostupni udaljenim računarima i kojim računarima."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Ovdje takođe trebate odlučiti da li ovaj računar treba koristiti skenere na "
-"udaljenim računarima."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skeneri na ovom računari su dostupni drugim računarima"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Dijeljenje skenera za računare:"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Koristi skenere na udaljenim računarima"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Koristi skenere na računaru:"
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Dijeljenje lokalnih skenera"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "Ovo su računari kojima treba dozvoliti korištenje lokalnog skenera:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Dodaj računar"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Izmijeni izabrani računar"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Ukloni izabrani računar"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Ime/IP adresa računara:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Izaberite računar kojem treba omogućiti pristup lokalnim skenerima:"
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Morate unijeti ime računara ili IP.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Ovaj računar je već na listi, ne možete ga ponovo dodati.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Upotreba udaljenih skenera"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Ovo su računari sa koji treba koristiti skenere:"
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"saned mora biti instaliran za dijeljenje lokalnih skenera.\n"
-"\n"
-"Želite li instalirati saned paket?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "Vaši skeneri neće biti dostupni putem mreže."
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Uklonjeni su neki uređaji u \"%s\" klasi hardvera:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr "- %s je uklonjen\n"
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Dodani su neki uređaji: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- %s je dodan\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Hardversko probanje u toku"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr "Hardverske izmjene u klasi \"%s\" (%s sekundi za odgovor)"
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Želite li pokrenuti odgovarajući konfiguracijski alat ?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Jezik"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Licenca"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Podešavanje miša"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Prepoznavanje hard diska"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Izaberite klasu instalacije"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Izaberite vašu tastaturu"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Particioniranje"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Formatiranje particija"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Izaberite pakete za instalaciju"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Instalacija sistema"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "Administratorska šifra"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Dodavanje korisnika"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Podešavanje mreže"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Instalacija bootloadera"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Podešavanje X"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Podešavanje servisa"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Instaliraj update"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Napusti instalaciju"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Da li je ovo ispravno?"
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "Nije izabrana datoteka"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Izabrali ste datoteku, a ne direktorij"
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Izabrali ste direktorij, a ne datoteku"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "Nema tog direktorija"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "Nema te datoteke"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Proširi stablo"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Smanji stablo"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Ravno / složeno po grupama"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s nije instaliran\n"
-"Kliknite na \"Dalje\" da ga instalirate ili \"Odustani\" za izlaz"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Instalacija nije uspjela"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "Broj logičkih extents: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Vašem sistemu ponestaje resursa. Možda imate neki problem sa "
-#~ "instalacijom\n"
-#~ "Mandriva Linuxa. Ako se ovo desi, možete pokušati tekstualnu instalaciju. "
-#~ "Za ovo,\n"
-#~ "pritisnite `F1' prilikom bootanja CDROMa, zatim unesite `text'."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Kontaktiram Mandriva Linux web stranicu da bih saznao listu dostupnih "
-#~ "mirrora..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Mandriva Linux instalacija %s"
-
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "UPOZORENJE: Ovaj uređaj je prethodno podešen za konekciju na Internet.\n"
-#~ "Izmjena polja ispod će prepisati ovu konfiguraciju.\n"
-#~ "Da li zaista želite ponovo podesiti ovaj uređaj?"
-
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Raspon dinamičkih IP adresa:"
-
-#~ msgid "hd"
-#~ msgstr "hd"
-
-#~ msgid "tape"
-#~ msgstr "traka"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "Udaljeni WebDAV sajt je već sinhroniziran!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "WebDAV transfer nije uspio!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr ""
-#~ "Backup kvota je prekoračena!\n"
-#~ "Iskorišteno je %d MB od alociranih %d MB."
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Unesite maksimalnu veličinu\n"
-#~ " dozvoljenu za Draxbackup (MB)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-Mrežu preko webdav-a.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Koristi grafički boot"
-
-#~ msgid "first step creation"
-#~ msgstr "kreiranje prvog koraka"
-
-#~ msgid "choose image file"
-#~ msgstr "izaberite image datoteku"
-
-#~ msgid "Browse"
-#~ msgstr "Pregledaj"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Podesite bootsplash sliku"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "boja progresne trake"
-
-#~ msgid "Preview"
-#~ msgstr "Pregled"
-
-#~ msgid "Choose color"
-#~ msgstr "Izaberite boju"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "Kernel poruke podrazumijevano tihe"
-
-#~ msgid "Notice"
-#~ msgstr "Napomena"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "Ova tema još nema bootsplash u %s !"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Morate izabrati image datoteku!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Generišem pregled..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "%s BootSplash (%s) pregled"
-
-#~ msgid ""
-#~ "The image \"%s\" cannot be load due to the following issue:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-#~ msgstr ""
-#~ "Ne mogu učitati sliku \"%s\" zbog sljedećeg problema:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Nema pogodne disketne jedinice"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Molim ubacite disketu Update Modula u jedinicu %s"
-
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Tifinagh (+latinica/arapsko pismo)"
-
-#~ msgid "No network card"
-#~ msgstr "Nema mrežne kartice"
-
-#~ msgid ""
-#~ "The following protocols can be used to configure an ethernet connection. "
-#~ "Please choose the one you want to use"
-#~ msgstr ""
-#~ "Možete koristiti sljedeće protokole za podešavanje Ethernet veze. "
-#~ "Izaberite onaj koji želite koristiti"
-
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "Koristi već instaliran drajver (%s)"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "Niste izabrali nijedan font"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "Nemate nijedan browser! Molim instalirajte neki browser"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "Nemate nijedan browser instaliran na vašem sistemu. Molim instalirajte "
-#~ "jedan ako želite pristupiti sistemu pomoći"
-
-#, fuzzy
-#~ msgid "Get YP server from DHCP"
-#~ msgstr "IP adresa DNS servera"
-
-#, fuzzy
-#~ msgid "Get NTPD server from DHCP"
-#~ msgstr "IP adresa DNS servera"
-
-#, fuzzy
-#~ msgid "Upload the system configuration"
-#~ msgstr "Update konfiguracije menija"
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
deleted file mode 100644
index f33840d15..000000000
--- a/perl-install/share/po/ca.po
+++ /dev/null
@@ -1,30164 +0,0 @@
-# translation of ca.po to Catalan
-# translation of DrakX.po to Catalan
-# Copyright (C) 2000-2004, 2005 Free Software Foundation, Inc.
-# Softcatala, softcatala.org, 2000-2003
-# Albert Astals Cid <astals11@terra.es>, 2003-2004, 2005.
-#
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: ca\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-04-02 00:51+0200\n"
-"Last-Translator: Albert Astals Cid <astals11@terra.es>\n"
-"Language-Team: Catalan <kde-i18n-ca@kde.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.3.1\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr ""
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr ""
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Reintenta"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr ""
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Reinicia"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr ""
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr ""
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr ""
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "Espereu si us plau, s'està detectant i configurant els dispositius..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-"Entreu la vostra informació d'usuari, la contrasenya s'usarà pel "
-"salvapantalles"
-
-#
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Configuració automàtica"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Espereu si us plau, s'està detectant i configurant els dispositius..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Error"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"S'ha produït un error, però no sé com gestionar-lo correctament.\n"
-"Si continueu, és sota la vostra responsabilitat."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "S'ha produït un error"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "Elimina fitxers de configuració del sistema"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "Simplement reinicia"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "Només podeu executar sense suport CDROM"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Mata aquests programes"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "Sense suport CDROM"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Llegiu-ho atentament!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"No podeu usar un altre CDROM mentre els següents programes s'estiguin "
-"executant: \n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "S'està copiant a memòria per tal de permetre treure el CDROM"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB o més"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "Servidor X"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Escolliu un servidor X"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Configuració Multi-head"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"El vostre sistema permet l'ús d'una configuració de múltiples capçals.\n"
-"Què voleu fer?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "No es pot instal·lar el paquet Xorg: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Seleccioneu la mida de la memòria de la vostra targeta gràfica"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Configuració de l'Xorg"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Quina configuració de l'Xorg voleu tenir?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Configura tots els capçals independentment"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Utilitza l'extensió Xinerama"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Configura només la targeta \"%s\"%s"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xfree %s amb acceleració 3D de maquinari"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s amb acceleració 3D de maquinari EXPERIMENTAL"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"La vostra targeta pot tenir acceleració 3D de maquinari amb l'Xfree %s,\n"
-"TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES POT "
-"PENJAR."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Personalitzada"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Surt"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Targeta gràfica"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Resolució"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Test"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Opcions"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Voleu conservar els canvis?\n"
-"La configuració actual és:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr ""
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Escolliu un monitor"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n'Play"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Genèric"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Venedor"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "L'exploració Plug'n'Play ha fallat. Especifiqueu un monitor"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Els dos paràmetres més importants son la velocitat de refresc vertical, que\n"
-"és la velocitat a què es refresca tota la pantalla, i el més important, la\n"
-"velocitat de sincronització horitzontal, que és la velocitat a què es\n"
-"visualitzen les línies d'exploració.\n"
-"\n"
-"És MOLT IMPORTANT que no especifiqueu un tipus de monitor amb un rang\n"
-"de sincronització superior a les possibilitats del vostre monitor, perquè\n"
-"el podríeu fer malbé.\n"
-"En cas de dubte, sigueu conservador amb aquest paràmetre."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Velocitat de refresc horitzontal"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Velocitat de refresc vertical"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 colors (8 bits)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32.768 colors (15 bits)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65.536 colors (16 bits)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milions de colors (24 bits)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Resolucions"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Altres"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Escolliu la resolució i la profunditat de color"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Targeta gràfica: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "D'acord"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Cancel·la"
-
-#
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Ajuda"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Comprova la configuració"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Voleu comprovar la configuració?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Avís: la comprovació d'aquesta targeta gràfica pot penjar-vos l'ordinador"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"S'ha produït un error:\n"
-"%s\n"
-"Intenteu canviar alguns paràmetres"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Se sortirà en %d segons"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "És aquest el paràmetre correcte?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Disposició del teclat: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Tipus de ratolí: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dispositiu del ratolí: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Sincronització horitzontal del monitor: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Refresc vertical del monitor: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Targeta gràfica: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Memòria gràfica: %s kB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Profunditat del color: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolució: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Controlador de l'Xorg: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Interfície gràfica a l'inici"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Puc configurar el vostre ordinador de manera que executi automàticament la "
-"interfície gràfica durant l'arrencada.\n"
-"Voleu que Xorg s'iniciï quan torneu a arrencar l'ordinador?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Sembla que la vostra targeta gràfica té un connector TV-OUT.\n"
-"Pot configurar-se de manera que faci servir memòria d'imatge.\n"
-"\n"
-"A tal efecte, heu de connectar la targeta gràfica al televisor abans "
-"d'arrencar l'ordinador.\n"
-"Llavors, escolliu l'opció \"TVout\" en el carregador de l'arrencada\n"
-"\n"
-"Teniu aquesta característica?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Quina norma segueix el vostre televisor?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr "altre"
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Espereu si us plau"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Instal·lació del carregador de l'arrencada en curs"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr ""
-"Ha fallat la instal·lació del carregador de l'arrencada. S'ha produït "
-"l'error següent:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Potser us caldrà canviar el dispositiu d'arrencada Open Firmware per\n"
-"habilitar el carregador de l'arrencada. Si no veieu l'indicador del\n"
-"carregador de l'arrencada en tornar a arrencar, premeu\n"
-"Command-Option-O-F en tornar a arrencar i introduïu:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Després, escriviu: shut-down\n"
-"En l'arrencada següent heu de veure l'indicador del carregador de "
-"l'arrencada."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Heu decidit instal·lar el gestor de l'arrencada en una partició.\n"
-"Això implica que ja teniu un gestor d'arrencada en el disc des del qual "
-"arrenqueu (p.ex.: System Commander).\n"
-"\n"
-"En quina unitat arrenqueu?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Primer sector de la unitat (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Primer sector de la partició de root"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "En el disquet"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Omet"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "Instal·lació del LILO/grub"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "On voleu instal·lar el carregador de l'arrencada?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Configuració del tipus d'arrencada"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Opcions principals del carregador de l'arrencada"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Introduïu la mida de la RAM en MB"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"L'opció \"Limita les opcions de la línia d'ordres\" no té cap utilitat sense "
-"una contrasenya"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Les contrasenyes no coincideixen"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Si us plau, torneu-ho a intentar"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Carregador de l'arrencada a utilitzar"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Dispositiu d'arrencada"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Demora abans d'arrencar la imatge predeterminada"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Habilita l'ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "Imposa No APIC"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "Imposa No APIC Local"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Contrasenya"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Contrasenya (un altre cop)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Limita les opcions de la línia d'ordres"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "limita"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Buida /tmp en cada arrencada"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Mida exacta de la RAM, si cal (s'han trobat %d MB)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Missatge d'inicialització"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Demora per al firmware obert"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Temps màxim d'arrencada del nucli"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Voleu habilitar l'arrencada des de CD?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Voleu habilitar l'arrencada des d'OF?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "SO per defecte?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Imatge"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Arrel"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Afegeix"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Mode de vídeo"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "Perfil de xarxa"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Etiqueta"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Predeterminat"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "No es permet una etiqueta buida"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Heu d'especificar una imatge del nucli"
-
-#
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Heu d'especificar una partició arrel"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Aquesta etiqueta ja està en ús"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Quin tipus d'entrada voleu afegir?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Un altre SO (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Un altre SO (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Un altre SO (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Aquestes són les diferents entrades en el menú d'arrencada.\n"
-"Podeu afegir-ne més o canviar-ne les existents."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "accés a programes X"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "accés a les eines rpm"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "permet \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "accés a fitxers administratius"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "accés a les eines de xarxa"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "accés a les eines de compilació"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(ja s'ha afegit %s)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Aquesta contrasenya és massa senzilla"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Si us plau, introduïu un nom d'usuari"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"El nom d'usuari només pot contenir lletres en minúscula, números, '-' i '_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "El nom d'usuari és massa llarg"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Aquest nom d'usuari ja s'ha afegit"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Afegeix un usuari"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Introduïu un usuari\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Fet"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Accepta l'usuari"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Nom real"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Nom d'accés"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Shell"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Icona"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Entrada automàtica"
-
-#
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Puc configurar el vostre ordinador de manera que entri automàticament amb un "
-"nom d'usuari."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Voleu utilitzar aquesta característica?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Sí"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "No"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Escolliu l'usuari per defecte:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Escolliu el gestor de finestres per executar:"
-
-#
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Si us plau, trieu un idioma per utilitzar."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "Tria d'idioma"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Mandriva Linux pot utilitzar múltiples idiomes. Seleccioneu\n"
-"els llenguatges que vulgueu instal·lar. Estaran disponibles\n"
-"quan reinicieu el sistema, després que la instal·lació s'hagi completat."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Utilitza Unicode per defecte"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Tots els idiomes"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "País / Regió"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Si us plau, seleccioneu el vostre país."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Aquesta és la llista completa de països"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "Altres països"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Avançat"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "Mètode d'entrada:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Cap"
-
-#
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "No es comparteix"
-
-#
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Permet tots els usuaris"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Voleu permetre als usuaris compartir alguns dels seus directoris?\n"
-"Fer això permetrà al usuaris fer un simple clic a \"Comparteix\" en el "
-"konqueror i el nautilus.\n"
-"\n"
-"\"Personalitzat\" permet configurar cada usuari per separat.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-"NFS: el sistema de compartició de fitxers tradicional de Unix, amb menys "
-"suport a Mac i Windows."
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-"SMB: un sistema de compartició de fitxers usat per Windows, Mac OS X i "
-"bastants sistemes Linux moderns."
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr "Podeu exportar utilitzant NFS o SMB. Seleccioneu quin voleu utilitzar."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Executa userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Tanca"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"La compartició per usuari utilitza el grup \"fileshare\".\n"
-"Podeu utilitzar userdrake per a afegir un usuari a aquest grup."
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Fitxer local"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr "Smart Card"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Domini de Windows"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr ""
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr ""
-
-#
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "Fitxer local:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Domini de Windows:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr ""
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr ""
-
-#
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Autenticació LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "Servidor LDAP"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "senzill"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr ""
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Domini"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Servidor"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "Base de dades LDAP"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr ""
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Xifrat"
-
-#
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Autenticació NIS"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "Domini del NIS"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "Servidor NIS"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Per tal que funcioni en un W2K PDC, segurament haureu de fer que "
-"l'administrador executi C:\\>net localgroup \"Accés compatible amb versions "
-"anteriors a Windows 2000\" everyone /add\" i que reiniciï el servidor.\n"
-"També necessitareu el nom d'usuari i la contrasenya d'un administrador del "
-"domini per poder connectar la màquina al domini de Windows(TM).\n"
-"Si la xarxa encara no està habilitada, DrakX provarà de connectar-se al "
-"domini després del pas de configuració de la xarxa.\n"
-"Si aquesta configuració fallés per algun motiu i l'autenticació no "
-"funcionés, executeu 'smbpasswd -j DOMINI -U USUARI%%CONTRASENYA' passant com "
-"a paràmetres el domini Windows en qüestió i el nom d'usuari i la contrasenya "
-"de l'administrador, després que arrenqui el sistema.\n"
-"L'ordre 'wbinfo -t' comprovarà si els secrets d'autenticació són bons."
-
-#
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autenticació en el domini de Windows"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Nom d'usuari de l'administrador del domini"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Contrasenya de l'administrador del domini"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr ""
-
-#: authentication.pm:171
-#, fuzzy, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr "Estableix la contrasenya de root i els mètodes d'autenticació de xarxa"
-
-#: authentication.pm:172
-#, fuzzy, c-format
-msgid "Set administrator (root) password"
-msgstr "Estableix la contrasenya de root"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Mètode d'autenticació"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Sense contrasenya"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Aquesta contrasenya és massa curta (ha de tenir com a mínim %d caràcters)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Autenticació"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "No es pot utilitzar la difusió sense un domini NIS"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Benvingut al selector de sistema operatiu!\n"
-"\n"
-"Trieu un sistema operatiu de la llista superior, o espereu\n"
-"per arrencar en el sistema operatiu predeterminat.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO amb menú gràfic"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO amb menú de text"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "no hi ha prou espai a /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "No podeu instal·lar el carregador de l'arrencada a una partició %s\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-"La configuració del vostre carregador d'arrencada s'ha d'actualitzar ja que "
-"la partició ha estat renumerada"
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"El carregador d'arrencada no s'ha pogut instal·lar correctament. Heu "
-"d'arrencar amb l'opció de rescat i escollir \"%s\""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "Reinstal·la el carregador de l'arrencada"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d minuts"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 minut"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d segons"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "El kdesu no hi és"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "El consolehelper no hi és"
-
-#
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Àustria"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Austràlia"
-
-#
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Bèlgica"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brasil"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Canadà"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Suïssa"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "República Txeca"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Alemanya"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Dinamarca"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estònia"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Espanya"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finlàndia"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "França"
-
-#
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Grècia"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Hongria"
-
-#
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Irlanda"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Israel"
-
-#
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Itàlia"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Japó"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Països Baixos"
-
-#
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Noruega"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Nova Zelanda"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Polònia"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rússia"
-
-#
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Suècia"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Eslovàquia"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Tailàndia"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Sud-àfrica"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Estats Units"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV és un protocol que permet muntar un directori d'un servidor web\n"
-"localment, i tractar-lo com si fos un sistema de fitxers local (amb el "
-"benentès\n"
-"que el servidor web està configurat com a servidor WebDAV). Si voleu afegir\n"
-"punts de muntatge WebDAV, seleccioneu \"Nou\"."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Nou"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Desmunta"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Munta"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Punt de muntatge"
-
-#
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Si us plau introduïu l'URL del servidor WebDAV"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "L'URL ha de començar per http:// o https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Servidor: "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Punt de muntatge: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Opcions: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Si us plau, feu primer una còpia de seguretat de les vostres dades"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Si penseu utilitzar aboot, assegureu-vos de deixar espai lliure (amb 2048\n"
-"sectors n'hi ha prou) al començament del disc"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Auxiliar"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Trieu una acció"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Teniu una partició de Microsoft Windows gran\n"
-"Suggereixo que primer en canvieu la mida\n"
-"(feu-hi clic i després feu clic a \"Canvia la mida\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Si us plau, feu clic a una partició "
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Detalls"
-
-#
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "No s'ha trobat cap disc dur!"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Intercanvi"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Buit"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Tipus de sistema de fitxers:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Utilitzeu \"%s\" al seu lloc"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Crea"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Tipus"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Suprimeix"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Utilitzeu primer \"Unmount\""
-
-#
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Trieu una altra partició"
-
-#
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Trieu una partició"
-
-#
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Surt"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Desfés"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Canvia al mode normal"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Canvia al mode expert"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Voleu continuar igualment?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Surt sense desar"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Voleu sortir sense escriure la taula de particions?"
-
-#
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Voleu desar les modificacions a /etc/fstab"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Us caldrà tornar a arrencar per tal que les modificacions de la taula de "
-"particions tinguin efecte"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Buida-ho tot"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Assigna automàticament"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Més"
-
-#
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Informació del disc dur"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "S'utilitzen totes les particions primàries"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "No es pot afegir cap més partició"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Si voleu tenir més particions, suprimiu-ne una per poder crear una partició "
-"ampliada"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Escriu la taula de particions"
-
-#
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Restaura la taula de particions"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Recupera la taula de particions"
-
-#
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Torna a carregar la taula de particions"
-
-#
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Muntatge automàtic dels dispositius extraïbles"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Seleccioneu el fitxer"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La còpia de seguretat de la taula de particions no té la mateixa mida\n"
-"Voleu continuar igualment?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "S'està intentant recuperar la taula de particions"
-
-#
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Informació detallada"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Canvia la mida"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Formata"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Afegeix al RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Afegeix a l'LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Elimina del RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Elimina de l'LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Modifica el RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Utilitza per a loopback"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Crea una nova partició"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Sector d'inici: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Mida en MB: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Tipus de sistema de fitxers: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Preferència: "
-
-#
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Nom del volum lògic"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"No podeu crear una nova partició\n"
-"(perquè heu arribat al màxim nombre de particions primàries).\n"
-"Esborreu primer una partició primària i creeu una partició ampliada."
-
-#
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Voleu suprimir el fitxer de loopback?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar el tipus de la partició %s, se'n perdran totes les dades"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Canvia el tipus de partició"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Quin sistema de fitxers voleu?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "S'està canviant de ext2 a ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "On voleu muntar el fitxer de loopback %s?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "On voleu muntar el dispositiu %s?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"No es pot anul·lar el punt de muntatge, perquè aquesta partició\n"
-"s'utilitza per al loopback. Elimineu primer el loopback"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "On voleu muntar %s?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "S'està canviant la mida"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "S'estan calculant els límits del sistema de fitxers de la FAT"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "No es pot canviar la mida d'aquesta partició"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Cal fer una còpia de seguretat de totes les dades d'aquesta partició"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Després de canviar la mida de la partició %s, se'n perdran totes les dades"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Escolliu la nova mida"
-
-#
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Nova mida en MB: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"Per assegurar la integritat de les dades després de canviar la mida de la o "
-"les particions,\n"
-"les comprovacions del sistema de fitxers es realitzaran el proper cop que "
-"arrenqueu en Windows(TM)"
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Escolliu un RAID existent al qual afegir-ho"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "nou"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Escolliu un LVM existent al qual afegir-ho"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "Nom LVM?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Aquesta partició no es pot utilitzar per al loopback"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Nom del fitxer de loopback: "
-
-#
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Proporcioneu un nom de fitxer"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Un altre loopback ja està utilitzant el fitxer, escolliu-ne un altre"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "El fitxer ja existeix. El voleu utilitzar?"
-
-#
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Opcions de muntatge"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Diversos"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "dispositiu"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "nivell"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "mida del fragment en KB"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Aneu amb compte: aquesta operació és perillosa."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Quin tipus de particionament voleu?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Us caldrà tornar a arrencar per tal que les modificacions tinguin efecte"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La taula de particions de la unitat %s s'escriurà al disc!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Després de formatar la partició %s, se'n perdran totes les dades"
-
-#
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Mou els fitxers a la nova partició"
-
-#
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Fitxers ocults"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"El directori %s encara conté dades\n"
-"(%s)"
-
-#
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "S'estan movent els fitxers a la nova partició"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "S'està copiant %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "S'està esborrant %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "la partició %s ara és %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Dispositiu: "
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "Nom devfs: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Lletra d'unitat de DOS: %s (només és una suposició)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Tipus: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Nom: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Inici: sector %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Mida: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sectors"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cilindre %d a %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Formatat\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Sense formatar\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Muntat\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Fitxer(s) de loopback:\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partició arrencada per defecte\n"
-"    (per a l'arrencada de l'MS-DOS, no per a LILO)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivell %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Mida del fragment %d KB\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Discs RAID %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Nom del fitxer de loopback: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"És possible que aquesta partició sigui\n"
-"una partició de programes de control. Potser\n"
-"és millor que no la toqueu.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Aquesta partició especial\n"
-"Bootstrap és per arrencar\n"
-"el vostre sistema en dual.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Només lectura"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Mida: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometria: %s cilindres, %s capçals, %s sectors\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Informació: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Discs LVM %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tipus de taula de particions: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "al canal %d amb id %d\n"
-
-#
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Clau de xifratge del sistema de fitxers: "
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Escolliu la clau de xifratge del sistema de fitxers"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Aquesta clau de xifratge és massa senzilla (ha de tenir com a mínim %d "
-"caràcters)"
-
-#
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Les claus de xifratge no coincideixen"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Clau de xifratge"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Clau de xifratge (un altre cop)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Algoritme de xifrat"
-
-#
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Canvia el tipus"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr ""
-"No es pot entrar amb el nom d'usuari %s (potser la contrasenya és "
-"incorrecta?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Cal l'autenticació de domini"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Quin nom d'usuari?"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Un altre"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Introduïu el vostre nom d'usuari, la contrasenya i el nom de domini per "
-"accedir a aquesta màquina."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Nom d'usuari"
-
-#
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Cerca servidors"
-
-#
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Cerca nous servidors"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Cal instal·lar el paquet %s. Voleu instal·lar-lo?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "El paquet %s necessari falta"
-
-#
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "S'estan instal·lant els paquets..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "S'estan eliminant els paquets..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "S'està muntant la partició %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "El muntatge de la partició %s en el directori %s ha fallat"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "S'està comprovant %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "s'ha produït un error en desmuntar %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "S'està habilitant la partició d'intercanvi %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "S'està formatant la partició %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "S'està creant i formatant el fitxer %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "No sé com formatar %s amb el tipus %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatació de %s ha fallat"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"No actualitzeu els temps d'accés a inode en aquest sistema de fitxers (p.ex. "
-"per a un accés\n"
-"més ràpid a l'\"spool\" de grups de discussió per accelerar els servidor de "
-"grups de discussió)."
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"Només es pot muntar explícitament (p. ex.,\n"
-"l'opció -a no farà que el sistema de fitxers es munti)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-"No interpretis el dispositius especials de caràcter o bloc en el sistema de "
-"fitxers."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"No permetis que s'executi cap binari en el sistema de fitxers\n"
-"muntat. Aquesta opció pot ser útil per a un servidor que tingui\n"
-"sistemes de fitxers amb binaris d'arquitectures diferents a la pròpia."
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"No permetis que els bits defineix-identificador-usuari o\n"
-"defineix-identificador-grup tinguin efecte (sembla segur,\n"
-"però de fet és força insegur si es té el suidperl(1) instal·lat)."
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Munta el sistema de fitxers només de lectura."
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "Totes les E/S del sistema de fitxers s'han de fer sincronitzadament."
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"Permet que un usuari normal munti el sistema de fitxers. El nom de l'usuari\n"
-"que munta s'escriu a mtab de manera que pugui tornar a desmuntar el\n"
-"sistema de fitxers. Aquesta opció implica les opcions noexec, nosuid i\n"
-"nodev (tret que quedin sobreescrites per opcions subsegüents, com en\n"
-"la línia d'opcions user,exec,dev,suid)."
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "Dona accés d'escriptura a usuaris normal"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "Dona accés només d'escriptura als usuaris normal"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "No podeu utilitzar el JFS per a particions inferiors a 16 MB"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "No podeu utilitzar el ReiserFS per a particions inferiors a 32 MB"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "amb /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "servidor"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"No es pot llegir la taula de particions del dispositiu %s, està massa "
-"malmesa :(\n"
-"Es pot mirar de continuar, suprimint les particions incorrectes (es perdran "
-"TOTES LES DADES!).\n"
-"L'altra solució és impedir al DrakX que modifiqui la taula de particions.\n"
-"(l'error és %s)\n"
-"\n"
-"Esteu d'acord en perdre totes les particions?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Els punts de muntatge han de començar amb una /"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Els punts de muntatge només poden contenir caràcters alfanumèrics"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ja hi ha una partició amb el punt de muntatge %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Heu seleccionat una partició RAID de programari com a arrel (/).\n"
-"Això no ho pot gestionar cap carregador d'arrencada sense una partició /"
-"boot.\n"
-"Si us plau, assegureu-vos d'afegir una partició /boot"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "No podeu utilitzar un volum lògic LVM per al punt de muntatge %s"
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Heu seleccionat un volum lògic LVM com a arrel (/).\n"
-"El carregador d'arrencada no ho pot gestionar sense una partició /boot.\n"
-"Si us plau, assegureu-vos d'afegir una partició /boot"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Aquest directori s'ha de mantenir dins del sistema de fitxers arrel"
-
-#
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Necessiteu un sistema de fitxers real (ext2/ext3, reiserfs, xfs o jfs) per a "
-"aquest punt de muntatge\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-"No podeu utilitzar un sistema d'arxius xifrat per al punt de muntatge %s"
-
-#
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "No hi ha prou espai per a l'assignació automàtica"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Res a fer"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Disquet"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Disc"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CD-ROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "Gravadors de CD/DVD"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Cinta"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Targeta de vídeo"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "Targeta de TV"
-
-#
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Altres sispositius multimèdia"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Targeta de so"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Webcam"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Processadors"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "Adaptadors XDSI"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Targeta Ethernet"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Mòdem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "Adaptadors ADSL"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Memòria"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "Controladors AGP"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Impressora"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Palanca de jocs"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "Controladors SATA"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "Controladors RAID"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Controladors (E)IDE/ATA"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Controladors Firewire"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "Controladors PCMCIA"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "Controladors SCSI"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "Controladors USB"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "Ports USB"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "Controladors SMBus"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Ponts i controladors del sistema"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Teclat"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Ratolí"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "SAI"
-
-#
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Escàner"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Desconegut/Altres"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "CPU #"
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Espereu si us plau... s'està aplicant la configuració"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "No hi ha cap controlador alternatiu"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"No hi ha cap controlador OSS/ALSA alternatiu conegut per a la vostra targeta "
-"de so (%s), que actualment fa servir \"%s\""
-
-#
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Configuració de so"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Aquí podeu seleccionar un controlador alternatiu (tant OSS com ALSA) per ala "
-"targeta de so (%s)"
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"La vostra targeta fa servir actualment el controlador %s \"%s\" (el "
-"controlador per defecte per a aquesta targeta és \"%s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"L'OSS (Sistema de So Obert) va ser la primera API de so. És una API "
-"independent del sistema operatiu (disponible en molts sistemes UNIX(tm)) "
-"però és molt bàsica i limitada.\n"
-"Encara més, tots els controladors OSS reinventen la roda.\n"
-"\n"
-"L'ALSA (Arquitectura Avançada de So per a Linux) és una arquitectura modular "
-"que\n"
-"funciona amb una àmplia varietat de targetes ISA, USB i PCI.\n"
-"\n"
-"També proporciona una API molt més funcional que la d'OSS.\n"
-"\n"
-"Per utilitzar alsa, es pot triar entre:\n"
-"- l'antiga API compatible d'OSS\n"
-"- la nova API d'ALSA que proporciona moltes característiques millorades però "
-"que necessita fer servir la llibreria ALSA.\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Controlador:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Resolució de problemes"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Advertència"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"L'antic controlador \"%s\" ha estat desaprovat.\n"
-"\n"
-"S'ha vist que causa problemes al nucli en descarregar-se.\n"
-"\n"
-"El nou controlador \"%s\" només s'usarà en la següent arrencada."
-
-#
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "No hi ha cap programa de control de codi obert"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"No hi ha cap programa de control gratuït per a la vostra targeta de so (%s), "
-"però n'hi ha un de propietat a \"%s\"."
-
-#
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "No hi ha cap controlador conegut"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "No hi ha cap controlador conegut per a la vostra targeta de so (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Controlador desconegut"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
-"Error: el programa de control \"%s\" per a la vostra targeta de so no és a "
-"la llista"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Resolució de problemes amb el so"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"El comprovador de sons d'error clàssic pot executar les ordres següents:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" us dirà el programa de control que la\n"
-"vostra targeta utilitza per defecte\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" us dirà el programa de control\n"
-"que està utilitzant actualment\n"
-"\n"
-"- \"/sbin/lsmod\" us permetrà comprovar si el seu mòdul (programa de\n"
-"control) està carregat o no\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" i \"/sbin/chkconfig --list alsa\" us\n"
-"diran si els serveis de so i alsa estan configurats per executar-se en\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" us dirà si el so està silenciat o no\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" us dirà quin programa utilitza la targeta de "
-"so.\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Deixa'm agafar qualsevol programa de control"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Selecció d'un programa de control arbitrari"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Si esteu segur de saber quin és el programa de control correcte per a la\n"
-"vostra targeta, en podeu seleccionar un de la llista superior.\n"
-"\n"
-"El programa de control actual per a la vostra targeta \"%s\" és \"%s\" "
-
-#
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Detecció automàtica"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Desconegut|Genèric"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Desconegut|CPH05X (bt878) [molts venedors]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Desconegut|CPH06X (bt878) [molts venedors]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Per a les targetes de TV més modernes, el mòdul bttv del nucli GNU/Linux "
-"detecta automàticament els paràmetres correctes.\n"
-"Si la vostra targeta no és detectada, podeu forçar el tipus de sintonitzador "
-"i de targeta aquí. Simplement seleccioneu els paràmetres necessaris per a la "
-"vostra targeta de TV"
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Model de la targeta:"
-
-#
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Tipus de sintonitzador:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "Nombre de memòries intermèdies de captura:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "nombre de memòries intermèdies per a captures amb MMAP"
-
-#
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "Configuració del PLL:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Permet l'ús de la ràdio:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "habilita l'ús de la ràdio"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Abans de continuar, llegiu atentament les clàusules de la llicència. "
-"Cobreix\n"
-"tota la distribució Mandriva Linux. Si esteu d'acord amb tots els termes de "
-"la\n"
-"llicència, feu clic al quadre \"%s\"; si no, prémer el botó \"%s\"\n"
-"reiniciarà el vostre ordinador."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Accepta"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"El GNU/Linux és un sistema multiusuari; això vol dir que cada usuari pot\n"
-"tenir les seves pròpies preferències, els seus propis fitxers, etc. Podeu "
-"llegir\n"
-"la ``Guia d'iniciació''\n"
-" per aprendre més coses sobre els sistemes\n"
-"multiusuari. Però, a diferència del \"root\", que és l'administrador del "
-"sistema,\n"
-"als usuaris que afegiu aquí no se'ls permetrà modificar res tret dels seus "
-"propis\n"
-"fitxers i configuracions, protegint així el sistema de canvis, intencionats "
-"o no, \n"
-" que tenen efecte sobre tot el sistema . Cal que us creeu, com a mínim, un "
-"usuari\n"
-"normal, i és aquest compte el que heu d'utilitzar per a l'ús quotidià. Tot i "
-"que\n"
-"és molt fàcil entrar com a \"root\" per a tot, també pot ser molt perillós: "
-"la més\n"
-"petita errada podria significar que el sistema deixés de funcionar. Si "
-"cometeu\n"
-"una errada greu com a usuari normal el pitjor que pot passar és que perdeu\n"
-"algunes daDES, però sense afectar a tot el sistema.\n"
-"\n"
-"Primer, heu d'introduir el vostre nom real. Per suposat, això no és "
-"obligatori,\n"
-"ja que podeu introduir el que vulgueu. DrakX agafarà la primera paraula\n"
-"que heu introduït en aquest camp i la copiarà en el camp \"%s\", que serà "
-"el\n"
-"nom que utilitzarà aquest usuari per entrar al sistema (ho podeu canviar si\n"
-"voleu). Després cal que introduïu una contrasenya. Des del punt de vista de\n"
-"la seguretat, una contrasenya d'un usuari no privilegiat (habitual) no és "
-"tan\n"
-"important com la del \"root\" des del punt de vista de la seguretat, però no "
-"hi\n"
-"ha cap raó per menystenir-la, deixant-la en blanc o fent-la massa senzilla: "
-"al\n"
-"cap i a la fi, els vostres fitxers poden estar en joc.\n"
-"\n"
-"Un cop hagueu fet clic a \"%s\" podreu afegir altres usuaris. Afegiu-ne un\n"
-"per a tothom que hagi de fer servir l'ordinador. Feu clic a \"%s\" quan "
-"hagueu\n"
-"acabat d'afegir-ne.\n"
-"\n"
-"Feu clic al botó \"%s\" per canviar l'intèrpret d'ordres (\"shell\") per "
-"defecte\n"
-"(bash) de l'usuari seleccionat. \n"
-"\n"
-"Quan hagueu acabat d'afegir usuaris, se us proposarà decidir quin usuari\n"
-"entrarà automàticament en el sistema en arrencar l'ordinador. Si us\n"
-"interessa aquesta característica (i no us importa gaire la seguretat "
-"local), \n"
-"trieu l'usuari i el gestor de finestres desitjat i feu clic a \"%s\".\n"
-"Si no hi esteu interessat, desactiveu el quadre \"%s\"."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Nom d'usuari"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Següent"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Aquestes són les particions de Linux existents que s'han detectat al disc "
-"dur.\n"
-"Podeu conservar les decisions preses per l'auxiliar, atès que són les "
-"adequades\n"
-"per a les instal·lacions més habituals. Si hi feu algun canvi, com a mínim "
-"heu\n"
-"de definir una partició arrel (\"/\"). No trieu una partició massa petita "
-"perquè\n"
-"no podríeu instal·lar-hi prou programari. Si voleu emmagatzemar les dades en "
-"una\n"
-"altra partició, us caldrà crear una partició \"/home\" (això només serà "
-"possible\n"
-"si hi ha més d'una partició de Linux disponible).\n"
-"\n"
-"Cada partició està identificada d'aquesta manera: \"Nom\", \"Capacitat\".\n"
-"\n"
-"\"Nom\" es compon de: \"tipus d'unitat de disc\", \"número d'unitat de disc"
-"\",\n"
-"\"número de la partició\" (per exemple, \"hda1\").\n"
-"\n"
-"El \"Tipus d'unitat de disc\" és \"hd\" si la vostre unitat de disc és IDE i "
-"\"sd\" si és SCSI.\n"
-"\n"
-"El \"Número de la unitat de disc\" és sempre una lletra després d'\"hd\" o "
-"\"sd\".\n"
-"Per a unitats de disc IDE:\n"
-"\n"
-" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
-"\n"
-" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
-"\",\n"
-"\n"
-" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"Amb unitats de disc SCSI, una \"a\" significa \"ID SCSI més baixa\",\n"
-"una \"b\" significa \"segona ID SCSI més baixa\", etc."
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"La instal·lació del Mandriva Linux està repartida en diversos CD-ROM. Si\n"
-"un dels paquets escollits està en un altre CD-ROM, DrakX expulsarà el CD\n"
-"actual i us demanarà que n'inseriu un altre. Si no teniu el CD necessari a\n"
-"mà, premeu \"%s\" i els paquets corresponents no s'instal·laran."
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"Ha arribat el moment d'indicar els programes que voleu instal·lar en el\n"
-"sistema. Mandriva Linux té milers de paquets, i per facilitar-ne la\n"
-"gestió s'han distribuït en grups d'aplicacions similars.\n"
-"\n"
-"Mandriva Linux agrupa els paquets en quatre categories. Podeu mesclar i fer\n"
-"coincidir aplicacions de grups diversos, de manera que una instal·lació\n"
-"d'``Estació de treball'' pot perfectament tenir instal·lades aplicacions\n"
-"de la categoria ``Servidor'' \n"
-" * \"%s\": si voleu utilitzar l'ordinador com a estació de treball,\n"
-"seleccioneu un o més grups de la categoria estació de treball.\n"
-"\n"
-" * \"%s\": si penseu utilitzar la vostra màquina per programar, escolliu\n"
-"els grups adients d'aquesta categoria. El grup especial \"LSB\"\n"
-"configurarà el vostre sistema per tal que compleixi tant com sigui\n"
-"possible amb les especificacions Linux Standard Base.\n"
-"\n"
-"   Seleccionar el grup \"LSB\" també instal·larà un kernel \"2.4\",\n"
-"en comptes del \"2.6\". Això es fa per assegurar que els sistema\n"
-"compleixi al 100%% amb LSB. Si no seleccioneu el grup \"LSB\"\n"
-"encara tindreu un sistema que compleix la LSB quasi al 100%%.\n"
-"\n"
-" * \"%s\":  si l'ordinador s'ha d'utilitzar com a servidor, seleccioneu\n"
-"quins dels serveis més habituals voleu instal·lar\n"
-"\n"
-" * \"%s\": aquí és on escollireu quin és el vostre entorn gràfic\n"
-"preferit. Heu de seleccionar-ne un com a mínim si voleu tenir una\n"
-"interfície gràfica.\n"
-"\n"
-"Si moveu el cursor per sobre d'un nom de grup veureu una breu explicació\n"
-"d'aquest grup.\n"
-"\n"
-"Podeu marcar la casella \"%s\", que és útil si esteu familiaritzat amb els\n"
-"diversos paquets o si voleu tenir un control total sobre el que "
-"s'instal·larà.\n"
-"\n"
-"Si heu començat la instal·lació en el mode \"%s\", podeu desseleccionar \n"
-"tots els grups si voleu evitar que s'instal·li cap paquet nou. Això és\n"
-"útil per reparar o actualitzar un sistema existent.\n"
-"Si desseleccioneu tots els grups quan estigueu fent una\n"
-"instal·lació normal (i no una actualització), se us presentarà un diàleg \n"
-"proposant-vos diferents opcions per a una instal·lació mínima:\n"
-"\n"
-" * \"%s\": instal·la els mínims paquets necessaris per tenir un\n"
-"entorn gràfic funcional\n"
-"\n"
-" * \"%s\": instal·la el sistema base i les utilitats bàsiques amb la seva\n"
-"documentació. Aquesta instal·lació és adequada per configurar un servidor;\n"
-"\n"
-" * \"%s\": instal·la el nombre mínim de paquets necessari per aconseguir un\n"
-"sistema Linux operatiu, només amb una interfície de línia d'ordres. Aquesta\n"
-"instal·lació ocupa uns 65 MB."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Estació de treball"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Desenvolupament"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Entorn gràfic"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Selecció individual de paquets"
-
-#
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Actualitza"
-
-#
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Amb X"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Amb la documentació bàsica"
-
-#
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Instal·lació mínima real"
-
-#: help.pm:149
-#, fuzzy, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"Si heu dit a l'instal·lador que volíeu seleccionar els paquets "
-"individualment\n"
-"se us presentarà un arbre amb tots els paquets classificats per grups i\n"
-"subgrups. Mentre navegueu per l'arbre, podeu seleccionar grups complets,\n"
-"subgrups o paquets individuals.\n"
-"\n"
-"Cada cop que seleccioneu un paquet de l'arbre, apareixerà una descripció a \n"
-"la dreta que us informarà de la finalitat del paquet.\n"
-"\n"
-"Si heu seleccionat un paquet de servidor, intencionadament o perquè\n"
-"formava part d'un grup, se us demanarà que confirmeu si realment voleu\n"
-"instal·lar aquests servidors. Per defecte, Mandriva Linux iniciarà i "
-"instal·larà automàticament qualsevol servidor durant l'arrencada. Tot i que\n"
-"siguin segurs i no tinguin cap problema conegut quan es publica la\n"
-"distribució, és totalment possible que es descobreixin forats de seguretat\n"
-"després que aquesta versió de Mandriva Linux quedi finalitzada.\n"
-"Si no sabeu què se suposa que fa un servei en particular, o per què s'està\n"
-"instal·lant, feu clic a \"%s\". Per defecte, si feu clic a \"%s\" els "
-"serveis\n"
-"llistats s'instal·laran i s'iniciaran automàticament durant l'arrencada.\n"
-"\n"
-"L'opció \"%s\" s'utilitza per inhabilitar el diàleg d'advertència que\n"
-"apareix quan l'instal·lador selecciona automàticament un paquet per "
-"resoldre\n"
-"un tema de dependències. Alguns paquets estan relacionats els uns amb els\n"
-"altres, de manera que la instal·lació d'un paquet fa que calgui instal·lar\n"
-"també algun altre programa. L'instal·lador pot determinar quins paquets "
-"calen\n"
-"per satisfer una dependència i completar la instal·lació satisfactòriament.\n"
-"\n"
-"La diminuta icona d'un disquet al peu de la llista us permet carregar una\n"
-"llista de paquets creada en una instal·lació anterior. Això és útil si "
-"teniu\n"
-"un cert nombre d'ordinadors que voleu configurar de manera idèntica. Si feu\n"
-"clic a aquesta icona se us demanarà que inseriu un disquet creat "
-"anteriorment\n"
-"al final d'una altra instal·lació. Vegeu el segon suggeriment de l'últim "
-"pas\n"
-"per saber com crear aquest disquet."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "Dependències automàtiques"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": feu clic al botó \"%s\" per obrir l'auxiliar de configuració de la\n"
-"impressora. Consulteu el capítol corresponent de la ``Guia d'iniciació''\n"
-"per tenir més informació en quant a la configuració de noves impressores.\n"
-"La interfície que apareix és similar a la que s'utilitza durant la "
-"instal·lació."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Configura"
-
-#: help.pm:189
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"En aquest diàleg escollireu els serveis que voleu que s'iniciïn durant "
-"l'arrencada.\n"
-"\n"
-"DrakX farà una llista de tots els serveis disponibles en la instal·lació "
-"actual.\n"
-"Reviseu-los amb cura i desmarqueu aquells que no siguin necessaris durant "
-"l'arrencada.\n"
-"\n"
-"Podeu obtenir una explicació breu sobre un servei si el seleccioneu. Si no\n"
-"esteu segur de la utilitat d'un servei, el més segur és deixar el "
-"comportament\n"
-"per defecte.\n"
-"\n"
-"AVÍS: Aneu especialment amb cura en aquest pas si penseu utilitzar "
-"l'ordinador com\n"
-"a servidor: segurament no voldreu iniciar serveis que no necessiteu.\n"
-"Recordeu que hi ha diversos serveis que poden ser perillosos si s'habiliten\n"
-"en un servidor. En general, seleccioneu només els serveis que realment "
-"necessiteu."
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"GNU/Linux gestiona l'hora en GMT (Greenwich Mean Time) i el tradueix a\n"
-"l'hora local d'acord amb la zona horària seleccionada. Si el rellotge de la\n"
-"placa base indica l'hora local, podeu desactivar-ho desseleccionant \"%s\", "
-"i\n"
-"això informarà a GNU/Linux que el rellotge del sistema i el rellotge del\n"
-"maquinari són a la mateixa zona horària. Això és convenient quan la màquina\n"
-"també té instal·lat un altre sistema operatiu.\n"
-"\n"
-"L'opció \"%s\" regularà automàticament l'hora connectant-se a un servidor\n"
-"horari remot d'Internet. Per tal que funcioni aquesta funció us caldrà "
-"tenir\n"
-"connexió a Internet. És millor triar un servidor que estigui ubicat a prop\n"
-"vostre. De fet, aquesta opció instal·la un servidor d'hora que altres "
-"màquines\n"
-"de la vostra xarxa local també podran utilitzar."
-
-#
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "El rellotge del vostre ordinador està regulat per GMT"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Sincronització automàtica de la hora"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"Targeta gràfica\n"
-"\n"
-"   Normalment, l'instal·lador detectarà automàticament i configurarà la\n"
-"targeta gràfica que tingueu instal·lada a l'ordinador. Si no fos així, la\n"
-"podeu seleccionar d'aquesta llista.\n"
-"\n"
-"   Cas que hi hagi diferents servidors per a la targeta, amb o sense\n"
-"acceleració 3D, se us demanarà que trieu el servidor que us sigui\n"
-"més convenient."
-
-#: help.pm:231
-#, fuzzy, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"L'X (per sistema X Window) és el cor de la interfície gràfica de GNU/Linux\n"
-"de què depenen tots els entorns gràfics (KDE, GNOME, AfterStep, "
-"WindowMaker,\n"
-"etc.) que venen amb Mandriva Linux.\n"
-"\n"
-"Veureu una relació de diferents paràmetres que podeu canviar per aconseguir\n"
-"una visualització gràfica òptima: Targeta gràfica\n"
-"\n"
-"   Normalment, l'instal·lador detectarà i configurarà automàticament la\n"
-"targeta gràfica instal·lada a l'ordinador. Si no fos així, podeu escollir "
-"de\n"
-"la llista la targeta que realment tingueu instal·lada.\n"
-"\n"
-"   En cas que hi hagi diferents servidors disponibles per a la vostra\n"
-"targeta, amb o sense acceleració 3D, se us demanarà que escolliu el que\n"
-"més us convingui.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normalment, l'instal·lador detectarà i configurarà automàticament el\n"
-"monitor que teniu connectat a l'ordinador. Si no és correcte, podreu triar\n"
-"d'aquesta llista el monitor que realment teniu connectat a l'ordinador.\n"
-"\n"
-"\n"
-"\n"
-"Resolució\n"
-"\n"
-"   Aquí podeu triar les resolucions i profunditats de color disponibles per\n"
-"al vostre maquinari. Trieu la que us vagi més bé (tot i que podreu\n"
-"canviar-la després de la instal·lació). Al monitor veureu una mostra de la\n"
-"configuració triada.\n"
-"\n"
-"\n"
-"\n"
-"Prova\n"
-"\n"
-"Depenent del maquinari aquesta entrada pot no aparèixer.\n"
-"\n"
-"   el sistema intentarà obrir una pantalla gràfica amb la resolució\n"
-"desitjada. Si podeu veure el missatge durant la prova i responeu \"%s\",\n"
-"DrakX passarà al pas següent. Si no el podeu veure, vol dir que la\n"
-"configuració detectada automàticament no era del tot correcta i la prova\n"
-"finalitzarà automàticament al cap de 12 segons, portant-vos de nou al menú.\n"
-"Canvieu els paràmetres fins que obtingueu una pantalla gràfica correcta.\n"
-"\n"
-"\n"
-"\n"
-"Opcions\n"
-"\n"
-"   Aquí podeu decidir si voleu que l'ordinador canviï automàticament a una\n"
-"interfície gràfica en arrencar. Òbviament, voldreu activar \"%s\" si\n"
-"l'ordinador ha d'actuar com a servidor, o si no heu aconseguit\n"
-"configurar la pantalla."
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Monitor\n"
-"\n"
-"   Normalment, l'instal·lador detectarà i configurarà automàticament el\n"
-"monitor que teniu connectat a l'ordinador. Si no és correcte, podreu triar\n"
-"d'aquesta llista el monitor que realment teniu connectat a l'ordinador."
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Resolució\n"
-"\n"
-"   Aquí podeu triar les resolucions i profunditats de color disponibles per\n"
-"al vostre maquinari. Trieu la que us vagi més bé (tot i que podreu\n"
-"canviar-la després de la instal·lació). Al monitor veureu una mostra de la\n"
-"configuració triada."
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"En cas que hi hagi diferents servidors disponibles per a la vostra\n"
-"targeta, amb o sense acceleració 3D, se us demanarà que escolliu\n"
-"el servidor que més us convingui."
-
-#: help.pm:308
-#, fuzzy, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Opcions\n"
-"\n"
-"   Aquí podeu decidir si voleu que l'ordinador canviï automàticament a una\n"
-"interfície gràfica en arrencar. Òbviament, activareu \"%s\" si l'ordinador "
-"ha\n"
-"de ser un servidor, o si no heu pogut configurar la pantalla."
-
-#: help.pm:316
-#, fuzzy, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"Ara és quan heu de decidir en quin lloc del vostre disc dur voleu "
-"instal·lar\n"
-"el sistema operatiu Mandriva Linux. Si el disc és buit, o si un sistema\n"
-"operatiu existent n'utilitza tot l'espai disponible, us caldrà \n"
-"particionar-lo. Bàsicament, particionar un disc dur consisteix a dividir-lo "
-"de\n"
-"manera lògica per crear espai on instal·lar el nou sistema Mandriva Linux.\n"
-"\n"
-"Atès que els efectes d'aquest procés solen ser irreversibles i poden\n"
-"implicar pèrdua de dades si ja teniu un sistema operatiu instal·lat, el\n"
-"particionament us pot espantar si sou un usuari sense experiència. Per "
-"sort,\n"
-"DrakX inclou un auxiliar que simplifica aquest procés. Abans de\n"
-"continuar, però, llegiu la resta d'aquesta secció i, sobre tot, preneu-vos\n"
-"el temps que calgui.\n"
-"\n"
-"Segons la configuració del vostre disc dur, hi ha diverses opcions "
-"possibles:\n"
-"\n"
-" * \"%s\": aquesta opció particionarà automàticament les unitats buides.\n"
-"Amb aquesta opció no se us preguntarà res més.\n"
-"\n"
-" * \"%s\": l'auxiliar ha detectat una o més particions de Linux al vostre\n"
-"disc dur. Si voleu utilitzar-les, escolliu aquesta opció. Se us demanarà "
-"que\n"
-"trieu els punts de muntatge associats a cadascuna de les particions. Els\n"
-"punts de muntatge existents se seleccionen per defecte, i en la majoria "
-"dels\n"
-"casos és bona idea conservar-los.\n"
-"\n"
-" * \"%s\" Si teniu el Microsoft Windows instal·lat al disc dur i n'ocupa "
-"tot\n"
-"l'espai disponible, caldrà crear-hi espai lliure per a GNU/Linux. Per fer-"
-"ho,\n"
-"podeu suprimir la partició i les dades del Windows (consulteu la solució\n"
-"``Esborrar completament el disc\") o canviar la mida de la partició FAT o\n"
-"NTFS de Windows. Aquest canvi de mida es pot dur a terme sense cap pèrdua "
-"de\n"
-"daDES, sempre que la partició de Windows hagi estat desfragmentada\n"
-"prèviament. És molt recomenable, fer una còpia de seguretat de les dades.\n"
-"Aquesta opció és la més recomanable si voleu utilitzar tant Mandriva Linux\n"
-"com Microsoft Windows al mateix ordinador.\n"
-"\n"
-"  Abans de decidir-vos per aquesta opció, penseu que en acabar la partició\n"
-"de Microsoft Windows serà més petita que anteriorment. Tindreu menys espai\n"
-"lliure a Microsoft Windows per emmagatzemar-hi dades o instal·lar-hi més "
-"programari.\n"
-"\n"
-" *\"%s\": si voleu suprimir totes les dades i particions que teniu al disc\n"
-"dur i substituir-les pel sistema Mandriva Linux, podeu escollir aquesta\n"
-"opció. Aneu amb compte, però, perquè, un cop la confirmeu, no podreu fer-vos "
-"enrere.\n"
-"\n"
-"   ¡¡ Si trieu aquesta opció, totes les dades del disc s'esborraran !!.\n"
-"\n"
-" *\"%s\": aquesta opció simplement esborra tot el contingut del disc i\n"
-"comença de nou, particionant des de zero. Totes les dades del disc es "
-"perdran.\n"
-"\n"
-"   ¡¡ Si trieu aquesta opció, totes les dades del disc s'esborraran !!.\n"
-"\n"
-" * \"%s\": si voleu particionar el disc dur manualment, podeu triar aquesta\n"
-"opció. Aneu amb compte: és una opció molt potent però també perillosa, ja\n"
-"que podeu perdre fàcilment totes les dades. Per tant, aquesta opció només "
-"és\n"
-"recomenable si heu fet abans alguna cosa similar i teniu una mica\n"
-"d'experiència. Trobareu més instruccions sobre la utilitat DiskDrake a la\n"
-"secció ``Gestió de les particions'' de la ``Guia d'iniciació''."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Utilitza l'espai lliure"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Utilitza les particions existents"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Utilitza l'espai lliure de la partició de Windows"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Esborra tot el disc"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Elimina Windows"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Particionament personalitzat de disc"
-
-#: help.pm:377
-#, fuzzy, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"Ja ho teniu. S'ha completat la instal·lació i el vostre sistema GNU/Linux\n"
-"està preparat per fer-se servir. Simplement premeu \"%s\" per reiniciar el\n"
-"sistema. No oblideu treure la font d'instal·lació (CD-ROM o disquet).\n"
-"La primera cosa que veureu, després que l'ordinador hagi finalitzat les\n"
-"comprovacions de maquinari, és el menú del carregador d'arrencada, que us\n"
-"deixa triar el sistema operatiu amb què voleu iniciar.\n"
-"\n"
-"El botó \"%s\" mostra dos botons més per:\n"
-"\n"
-" * \"%s\": per crear un disquet d'instal·lació que realitzarà "
-"automàticament\n"
-"una instal·lació completa sense l'ajuda d'un operador, semblant a la\n"
-"instal·lació que acabeu de configurar.\n"
-"\n"
-"   Tingueu en compte que hi ha dues opcions diferents després de fer clic al "
-"botó:\n"
-"\n"
-"    * \"%s\". Aquesta és una instal·lació parcialment automatitzada; el pas\n"
-"de particionament és l'únic procediment interactiu.\n"
-"\n"
-"    * \"%s\". Instal·lació completament automatitzada: el disc dur es\n"
-"reescriu completament i totes les dades es perden.\n"
-"\n"
-"   Aquesta característica és força útil quan es fa una instal·lació a un\n"
-"cert nombre d'ordinadors similars. En trobareu més informació a la secció\n"
-"d'instal·lació automàtica del nostre lloc web.\n"
-"\n"
-" * \"%s\": desa una llista dels paquets seleccionats en aquesta\n"
-"instal·lació. Per utilitzar aquesta selecció en una altra instal·lació,\n"
-"inseriu el disquet i inicieu la instal·lació. A l'indicador, premeu la "
-"tecla\n"
-"F1, i escriviu >>linux defcfg=\"floppy\"<<."
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Genera un disquet per a la instal·lació automàtica"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Repeteix"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Automàtica"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Desa la selecció de paquets"
-
-#: help.pm:412
-#, fuzzy, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Per poder utilitzar les particions que s'acaben de definir cal formatar-les\n"
-"(la formatació consisteix a crear-hi un sistema de fitxers).\n"
-"\n"
-"En aquest punt, potser voldreu tornar a formatar algunes de les particions\n"
-"existents per eliminar les dades que contenen. Si és així, seleccioneu\n"
-"també aquestes particions.\n"
-"\n"
-"Tingueu en compte que no cal tornar a formatar totes les particions que ja\n"
-"existien; heu de tornar a formatar les particions que continguin el sistema\n"
-"operatiu (com ara \"/\", \"/usr\" o \"/var\"), però no les que contenen\n"
-"dades que voleu conservar (habitualment, \"/home\").\n"
-"\n"
-"Aneu amb compte en seleccionar les particions; després de la formatació,\n"
-"totes les dades s'hauran suprimit i no en podreu recuperar cap.\n"
-"\n"
-"Feu clic a \"%s\" quan estigueu a punt per formatar les particions.\n"
-"\n"
-"Feu clic a \"%s\" si voleu seleccionar una altra partició per instal·lar\n"
-"el nou sistema Mandriva Linux.\n"
-"\n"
-"Feu clic a \"%s\" si voleu seleccionar particions on cercar-hi blocs "
-"defectuosos."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Anterior"
-
-#: help.pm:434
-#, fuzzy, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"Ara esteu instal·lant Mandriva Linux, és probable que alguns paquets\n"
-"hagin estat actualitzats desde la data de llançament. Alguns errors poden\n"
-"haver estat resolts, i altres problemes de seguretat poden estar ja "
-"corregits.\n"
-"Per beneficiar-vos d'aquestes actualitzacions, les podeu baixar d'Internet.\n"
-"Trieu \"%s\" si teniu una connexió a Internet operativa, o \"%s\" si "
-"preferiu\n"
-"instal·lar-les més tard.\n"
-"\n"
-"Si trieu \"%s\" apareixerà una llista de llocs des d'on podeu baixar les\n"
-"actualitzacions. Escolliu la ubicació més propera. Aleshores, apareixerà\n"
-"un arbre de selecció de paquets: comproveu la selecció i premeu \"%s\" per\n"
-"baixar i instal·lar els paquets seleccionats, o \"%s\" per abandonar."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Instal·la"
-
-#: help.pm:447
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"Ara és el moment de triar el nivell de seguretat desitjat per a la màquina.\n"
-"Com a norma general, el nivell de seguretat ha de ser més alt si la màquina\n"
-"conté dades importants, o si està connectada directament a Internet.\n"
-"Tanmateix, un nivell alt de seguretat sovint comporta una disminució de la\n"
-"facilitat d'ús.\n"
-"\n"
-"Si no sabeu quin escollir, deixeu l'opció per defecte.. Podreu canviar\n"
-"el nivell de seguretat més tard amb l'eina draksec del\n"
-"Centre de Control Mandriva Linux.\n"
-"\n"
-"El camp \"%s\" pot informar l'usuari del sistema qui serà el responsable\n"
-"de la seguretat. Els missatges de seguretat s'enviaran a aquesta adreça."
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Administrador de seguretat"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Ara és quan heu de decidir quina(es) partició(ns) voleu utilitzar per\n"
-"instal·lar el sistema Mandriva Linux. Si ja s'han definit les particions\n"
-"en una instal·lació anterior de GNU/Linux o mitjançant una altra eina de\n"
-"particionament, podeu utilitzar les particions existents. En cas contrari,\n"
-"s'han de definir particions al disc dur.\n"
-"\n"
-"Per crear particions, primer heu de seleccionar un disc dur. Podeu\n"
-"seleccionar el disc que s'ha de particionar fent clic a ``hda'' per a la\n"
-"primera unitat IDE, ``hdb'' per a la segona, ``sda'' per a la primera "
-"unitat\n"
-"SCSI, etc.\n"
-"\n"
-"Per particionar el disc dur seleccionat, podeu utilitzar aquestes opcions:\n"
-"\n"
-" * \"%s\": aquesta opció suprimeix totes les particions que hi ha al\n"
-"disc dur seleccionat.\n"
-"\n"
-" * \"%s\": aquesta opció us permet crear automàticament les particions\n"
-"ext3 i d'intercanvi en l'espai lliure del disc dur.\n"
-"\n"
-"\"%s\": dóna accés a funcions addicionals:\n"
-"\n"
-" * \"%s\": desa la taula de particions en un disquet. És útil per a una\n"
-"recuperació posterior de la taula de particions si fos necessari. És molt\n"
-"recomanable que efectueu aquesta operació.\n"
-"\n"
-" * \"%s\": permet restaurar d'un disquet una taula de particions que hi\n"
-"hagueu desat prèviament.\n"
-"\n"
-" * \"%s\": si la taula de particions està malmesa, podeu provar de\n"
-"recuperar-la utilitzant aquesta opció. Aneu amb compte i recordeu que no\n"
-"sempre funciona.\n"
-"\n"
-" * \"%s\": descarta tots els canvis fets i torna a carregar la taula\n"
-"de particions original.\n"
-"\n"
-" * \"%s\": si desseleccioneu aquesta opció fareu que els usuaris hagin\n"
-"de muntar i desmuntar manualment les unitats de suports extraïbles, com ara\n"
-"els disquets i els CD-ROM.\n"
-"\n"
-" * \"%s\": utilitzeu aquesta opció si voleu utilitzar un auxiliar per\n"
-"particionar el vostre disc dur. Es recomana que l'utilitzeu si no teniu\n"
-"sòlids coneixements sobre particionament.\n"
-"\n"
-" * \"%s\": utilitzeu aquesta opció per cancel·lar els canvis.\n"
-"\n"
-" * \"%s\": permet accions addicionals en les particions (tipus,\n"
-"opcions, format) i dóna més informació sobre el disc dur.\n"
-"\n"
-" * \"%s\": quan hagueu acabat de particionar el disc dur, aquesta opció\n"
-"desarà els canvis al disc.\n"
-"\n"
-"En definir la mida d'una partició, podeu acabar d'afinar-la mitjançant\n"
-"les tecles de fletxa del teclat.\n"
-" \n"
-"Nota: podeu accedir a qualsevol opció mitjançant el teclat. Moveu-vos per\n"
-"les particions amb les tecles Tab i Fletxa amunt/Fletxa avall.\n"
-"\n"
-"Quan seleccioneu una partició, podeu utilitzar:\n"
-"\n"
-" * Ctrl+c per crear una nova partició (quan se n'ha seleccionat una de "
-"buida)\n"
-"\n"
-" * Ctrl+d per suprimir una partició\n"
-"\n"
-" * Ctrl+m per definir el punt de muntatge\n"
-"\n"
-"Per a més informació sobre els diferents sistemes de fitxers disponibles,\n"
-"llegiu el capítol sobre ext2FS del ``Manual de Referència''.\n"
-"\n"
-"Si esteu fent la instal·lació en un ordinador PPC, voldreu crear una\n"
-"petita partició ``bootstrap'' HFS d'un mínim d'1 MB per a ús del carregador\n"
-"d'arrencada yaboot. Si decidiu fer-la una mica més gran, per exemple de\n"
-"50 MB, us serà d'utilitat per emmagatzemar un nucli de recanvi i imatges\n"
-"del disc RAM per a situacions d'emergència durant l'arrencada."
-
-#
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Muntatge automàtic dels dispositius extraïbles"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Commuta entre els modes normal i expert"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"S'ha detectat més d'una partició de Microsoft a la unitat de disc.\n"
-"Si us plau, trieu quina d'elles voleu redimensionar per instal·lar el nou\n"
-"sistema operatiu Mandriva Linux.\n"
-"\n"
-"Cada partició està identificada d'aquesta manera: \"Nom Linux\",\n"
-"\"Nom Windows\" \"Capacitat\".\n"
-"\n"
-"\"Nom Linux\" es compon de: \"tipus d'unitat de disc dur\",\n"
-"\"número d'unitat de disc dur\", \"número de la partició\"\n"
-"(per exemple, \"hda1\").\n"
-"\n"
-"\"Tipus d'unitat de disc dur\" és \"hd\" si la vostre unitat de disc dur és\n"
-"IDE i \"sd\" si és SCSI.\n"
-"\n"
-"\"Número de la unitat de disc dur\" és sempre una lletra després d'\"hd\" o\n"
-"\"sd\". Amb unitats de disc IDE:\n"
-"\n"
-" * \"a\" significa \"unitat de disc mestra en el controlador IDE primari\",\n"
-"\n"
-" * \"b\" significa \"unitat de disc esclava en el controlador IDE primari"
-"\",\n"
-"\n"
-" * \"c\" significa \"unitat de disc mestra en el controlador IDE secundari"
-"\",\n"
-"\n"
-" * \"d\" significa \"unitat de disc esclava en el controlador IDE secundari"
-"\".\n"
-"\n"
-"Amb les unitats de disc SCSI, una \"a\" significa \"ID SCSI més baixa\",\n"
-"una \"b\" significa \"segona ID SCSI més baixa\", etc.\n"
-"\n"
-"\"Nom Windows\" és la lletra de la vostra unitat de disc sota Windows (el\n"
-"primer disc o partició s'anomena \"C:\")."
-
-#: help.pm:564
-#, fuzzy, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"%s\": comproveu que la selecció del país és correcta. Si no sou a\n"
-"aquest país, feu clic al botó \"%s\" i seleccioneu-ne un altre.\n"
-"Si el vostre país no és a la primera llista, feu clic al botó \"%s\" per\n"
-"obtenir una llista de països completa."
-
-#: help.pm:569
-#, fuzzy, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"Aquest pas només s'activa si s'ha trobat una partició GNU/Linux antiga\n"
-"al vostre ordinador.\n"
-"\n"
-"DrakX necessita saber si voleu realitzar una instal·lació nova o\n"
-"una actualització d'un sistema Mandriva Linux existent:\n"
-"\n"
-" * \"%s\": aquesta opció destrueix gairebé del tot el sistema antic. Si\n"
-"voleu canviar les particions dels discs durs, o el sistema de fitxers,\n"
-"heu d'utilitzar aquesta opció. No obstant això, i depenent de l'esquema de\n"
-"particionament que tingueu, podeu evitar que part de les dades existents se\n"
-"sobreescriguin.\n"
-"\n"
-" * \"%s\": aquest tipus d'instal·lació us permet actualitzar els paquets "
-"que\n"
-"ja estan instal·lats al sistema Mandriva Linux. L'esquema de particionament\n"
-"actual i les dades d'usuari no queden afectades. La majoria de les altres\n"
-"fases de configuració queden disponibles, de manera similar a una\n"
-"instal·lació estàndard.\n"
-"\n"
-"L'opció “Actualitza” ha de funcionar correctament en sistemes Mandriva "
-"Linux\n"
-"amb la versió \"8.1\" o posteriors. No es recomana realitzar una\n"
-"actualització en versions de Mandriva Linux anteriors a la \"8.1\"."
-
-#: help.pm:591
-#, fuzzy, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"DrakX seleccionarà automàticament la configuració de teclat correcta\n"
-"segons l'idioma que hagueu escollit a Secció. Comproveu que la selecció\n"
-"us vagi bé o escolliu una altra configuració de teclat.\n"
-"\n"
-"Tanmateix, pot ser que tingueu un teclat que no correspongués exactament al\n"
-"vostre idioma: per exemple, si sou un suís que parla anglès, potser teniu "
-"un\n"
-"teclat suís. O, si parleu anglès però viviu al Quebec, us podeu trobar en "
-"la\n"
-"mateixa situació i el vostre teclat no coincidirà amb el vostre idioma. En\n"
-"tots dos casos, aquesta fase de la instal·lació us permetrà triar un teclat\n"
-"adequat d'una llista.\n"
-"\n"
-"Feu clic al botó \"%s\" per veure la llista completa de teclats "
-"disponibles.\n"
-"\n"
-"Si trieu una disposició de teclat basada en un alfabet no llatí, el diàleg\n"
-"següent us permetrà escollir la tecla que servirà per canviar entre les\n"
-"configuracions llatina i no llatina."
-
-#: help.pm:609
-#, fuzzy, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"L'idioma preferit que trieu afectarà a l'idioma de la documentació,\n"
-"l'instal·lador i a tot el sistema en general. Seleccioneu primer la\n"
-"regió on us trobeu i després l'idioma que parleu.\n"
-"\n"
-"Si feu clic al botó \"%s\" podreu seleccionar altres idiomes que vulgueu\n"
-"instal·lar a la vostra estació de treball. S'instal·laran els fitxers\n"
-"d'idioma específics de la documentació i de les aplicacions. Per exemple,\n"
-"si heu de tenir usuaris espanyols a l'ordinador, podeu triar l'anglès com a\n"
-"idioma per defecte a la vista d'arbre i marcar \"%s\" a la secció Avançat.\n"
-"\n"
-"En quant al suport UTF-8 (unicode): Unicode és una nova codificació de\n"
-"caràcters que cobreix tots els idiomes existents. El suport complet a\n"
-"GNU/Linux encara està sota desenvolupament. Per aquesta raó, Mandriva Linux\n"
-"l'usarà o no depenent de les opcions que esculli l'usuari:\n"
-"\n"
-" * Si escolliu un idioma amb una codificació existent forta(idiomes\n"
-"llatins, rus, japonès, xinès, coreà, thai, grec, turc, la majoria dels\n"
-"idiomes iso-8859-2), la codificació existent s'usarà per defecte;\n"
-"\n"
-" * La resta d'idiomes usaran unicode per defecte;\n"
-"\n"
-" * Si s'instal·len dos o més idiomes i aquests idiomes no usen la mateixa\n"
-"codificació, llavors s'usarà unicode per tot el sistema;\n"
-"\n"
-" * Finalment, es pot forçar l'ús de unicode si s'escull la opció\"%s\"\n"
-"independentment dels idiomes escollits.\n"
-"\n"
-"Noteu que no esteu limitats a escollir només un idioma addicional. Podeu\n"
-"triar diversos idiomes addicionals, i fins i tot instal·lar-los tots\n"
-"activant la casella \"%s\". Si habiliteu un idioma esteu instal·lant les\n"
-"traduccions, els tipus de lletra, els verificadors ortogràfics, etc. "
-"d'aquest idioma.\n"
-"\n"
-"Per passar d'un dels idiomes a un altre, podeu executar com a \"root\"\n"
-"l'ordre \"/usr/sbin/localedrake\" per canviar l'idioma de tot el sistema. "
-"Si\n"
-"l'executeu com a usuari normal, només es canviarà l'idioma d'aquest\n"
-"usuari concret."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "Espanyol"
-
-#: help.pm:650
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"DrakX generalment detecta el nombre de botons que té el vostre ratolí.\n"
-"Si no pot, assumeix que teniu un ratolí de dos botons i el configurarà per\n"
-"emular el tercer botó. Es pot ``prémer' ' el tercer botó d'un ratolí de dos\n"
-"botons fent clic simultàniament als botons dret i esquerre. DrakX\n"
-"detectarà automàticament si el ratolí utilitza la interfície PS/2, sèrie o "
-"USB.\n"
-"\n"
-"En cas que tingueu un ratolí de 3 botons sense rodeta, podeu escollir\n"
-"\"%s\". DrakX configurarà el ratolí per tal de simular la rodeta,\n"
-"per fer-ho premeu el botó central i moveu el ratolí a dalt i a baix.\n"
-"\n"
-"Si per alguna raó voleu especificar un altre tipus de ratolí,\n"
-"seleccioneu-lo a la llista.\n"
-"\n"
-"Si escolliu un ratolí diferent del ratolí per defecte, es mostrarà una\n"
-"pantalla de prova. Utilitzeu els botons i la roda per verificar que la\n"
-"configuració és correcta i que el ratolí funciona bé. Si el ratolí no\n"
-"funciona bé, premeu la barra d'espai o la tecla [Intro] per cancel·lar la\n"
-"prova i tornar a la llista.\n"
-"\n"
-"De vegaDES, la roda del ratolí no es detecta automàticament. En aquest cas,\n"
-"haureu de seleccionar-lo a la llista. Assegureu-vos de triar el que\n"
-"correspon al port a què esta connectat el ratolí. Després de seleccionar un\n"
-"ratolí i prémer el botó \"%s\", a la pantalla apareixerà un ratolí. Mogueu "
-"la\n"
-"roda del ratolí per assegurar-vos que s'ha activat correctament, comprovant\n"
-"que es mou també a la pantalla; després comproveu els botons i que el "
-"cursor\n"
-"de la pantalla es mou quan moveu el ratolí."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "amb emulació de rodeta"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Universal | Qualsevol ratolí PS/2 o USB"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Si us plau, seleccioneu el port correcte. Per exemple, el port \"COM1\" a\n"
-"Windows s'anomena \"ttyS0\" a GNU/Linux."
-
-#: help.pm:688
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Aquesta és la decisió més important quant a la seguretat del vostre sistema\n"
-"GNU/Linux: heu d'introduir la contrasenya de l'usuari \"root\". El \"root\"\n"
-"és l'administrador del sistema i és l'únic autoritzat a fer "
-"actualitzacions,\n"
-"afegir usuaris, canviar la configuració del tot el sistema, etc. En poques\n"
-"paraules, el \"root\" ho pot fer tot! És per això que heu d'escollir una\n"
-"contrasenya que sigui difícil d'endevinar; DrakX us avisarà si és massa\n"
-"fàcil. Com veieu, podeu optar per no introduir cap contrasenya, però us\n"
-"aconsellem vivament que no ho feu. GNU/Linux és tan vulnerable als errors\n"
-"de l'operador com qualsevol altre sistema operatiu. Com que l'usuari\n"
-"\"root\" pot superar totes les limitacions i esborrar accidentalment totes\n"
-"les dades de qualsevol partició com a conseqüència d'accedir-hi sense\n"
-"precaucions, és molt important que sigui difícil esdevenir \"root\".\n"
-"\n"
-"La contrasenya ha de ser una mescla de caràcters alfanumèrics i, com a\n"
-"mínim, de 8 caràcters de longitud. No apunteu enlloc la contrasenya de\n"
-"\"root\" ja que és molt fàcil comprometre el sistema si ho feu.\n"
-"\n"
-"Tot i això, no feu la contrasenya massa llarga o complicada perquè heu de\n"
-"poder recordar-la!\n"
-"\n"
-"La contrasenya no es mostrarà per pantalla quan la teclegeu. Per tant,\n"
-"haureu d'escriure-la dues vegades per reduir la probabilitat d'errors en\n"
-"l'escriptura. Si, malauradament, feu el mateix error dues vegaDES, haureu\n"
-"d'usar aquesta contrasenya ``incorrecta'' el primer cop que us connecteu.\n"
-"\n"
-"Si voleu que aquest ordinador sigui controlat per un servidor\n"
-"d'autenticació, feu clic al botó \"%s\".\n"
-"\n"
-"Si la vostra xarxa usa els serveis d'autenticació LDAP, NIS o Windows\n"
-"Domain, seleccioneu l'adient per a \"%s\" . Si no sabeu quin utilitzar,\n"
-"pregunteu-ho al vostre administrador de xarxa.\n"
-"\n"
-"Si teniu problemes per recordar les contrasenyes, si l'ordinador mai no es\n"
-"connectarà a Internet o si confieu absolutament en tothom que utilitza\n"
-"l'ordinador, podeu triar tenir \"%s\"."
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "autenticació"
-
-#: help.pm:725
-#, fuzzy, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"LILO i GRUB són carregadors d'arrencada de GNU/Linux. Normalment,\n"
-"aquesta fase es realitza de manera totalment automàtica. DrakX analitzarà\n"
-"el sector d'arrencada del disc i actuarà conforme al que hi trobi:\n"
-"\n"
-" * si troba un sector d'arrencada del Windows, el reemplaçarà amb un sector\n"
-"d'arrencada de GRUB/LILO. D'aquesta manera podreu carregar GNU/Linux\n"
-"o un altre SO.\n"
-"\n"
-" * si troba un sector d'arrencada grub o LILO, el reemplaçarà amb un nou.\n"
-"\n"
-"Si no pot prendre una decisió,  DrakX us preguntarà on ha de col·locar el\n"
-"carregador d'arrencada. Normalment, \"%s\" és el lloc més segur. Si "
-"escolliu\n"
-"\"%s\" no s'instal·larà cap carregador d'arrencada. Utilitzeu-lo només si\n"
-"sabeu que esteu fent."
-
-#: help.pm:742
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Ara cal seleccionar el sistema d'impressió del vostre ordinador. Altres\n"
-"sistemes operatius us poden oferir un, però el Mandriva Linux n'ofereix\n"
-"dos. Cada sistema d'impressió és el més convenient per a un tipus de\n"
-"configuració determinat.\n"
-"\n"
-" * \"%s\", acrònim de \"print, do not queue\" (imprimeix, no facis cua), és\n"
-"la millor opció si teniu una connexió directa amb la impressora i voleu\n"
-"evitar els embussos a l'hora d'imprimir, i no teniu impressores de xarxa.\n"
-"(\"%s\" només gestionarà xarxes molt senzilles i és una mica lenta quan\n"
-"s'usa en xarxa.) Escolliu \"pdq\" si és la vostra primera incursió\n"
-"en GNU/Linux.\n"
-"\n"
-" * \"%s\" `` Common Unix Printing System'', Sistema d'impressió comú de\n"
-"Unix, és una elecció excel·lent tant si voleu imprimir a la vostra\n"
-"impressora local com a l'altra punta del món. És senzilla de configurar i\n"
-"pot actuar com a servidor o client per a l'antic sistema d'impressió \"lpd"
-"\"\n"
-"i, per tant, és compatible amb sistemes operatius antics que encara\n"
-"necessitin serveis d'impressió. És força potent, però la configuració "
-"bàsica\n"
-"és gairebé tan senzilla com la de \"pdq\". Si necessiteu emular un servidor\n"
-"\"lpd\", heu d'habilitar el dimoni \"cups-lpd\". \"%s\" inclou frontals\n"
-"gràfics per a la impressió o per escollir les opcions d'impressió\n"
-"i per gestionar la impressora.\n"
-"\n"
-"Si ara feu una tria, i després veieu que el sistema d'impressió no us\n"
-"agrada, podeu canviar-lo executant el PrinterDrake des del Centre de "
-"control\n"
-"de Mandriva Linux i fent clic al botó Expert."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Expert"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Primer, DrakX detectarà qualsevol dispositiu IDE en l'ordinador. També\n"
-"cercarà una o més targetes SCSI PCI. Si troba una targeta SCSI, DrakX\n"
-"instal·larà automàticament el controlador adequat.\n"
-"\n"
-"Com que la detecció de maquinari no és infal·lible, pot ser que DrakX no "
-"trobi\n"
-"els discos durs; si és així, caldrà que indiqueu el vostre maquinari "
-"manualment.\n"
-"\n"
-"Si heu de seleccionar l'adaptador SCSI PCI manualment, DrakX us preguntarà "
-"si\n"
-"voleu configurar-ne les opcions. Convé que deixeu que DrakX comprovi\n"
-"el maquinari per saber les opcions específiques de la targeta que calen per "
-"inicialitzar\n"
-"l'adaptador. La majoria de vegaDES, DrakX realitzarà aquest pas sense "
-"problemes.\n"
-"\n"
-"Si DrakX no pot comprovar les opcions per determinar automàticament els "
-"paràmetres\n"
-"que s'han de passar al maquinari, us caldrà configurar el controlador "
-"manualment."
-
-#: help.pm:786
-#, fuzzy, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\": si es detecta una targeta de so al vostre sistema, es mostra aquí.\n"
-"Si veieu que la targeta de so que es mostra no és la que realment teniu al\n"
-"sistema, podeu fer clic al botó i seleccionar un altre programa de control."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Targeta de so"
-
-#: help.pm:791
-#, fuzzy, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"Com a revisió, DrakX presentarà un resum de la informació que\n"
-"té sobre el vostre sistema. Segons el maquinari instal·lat, podeu\n"
-"tenir algunes o totes les entrades següents. Cada entrada consta\n"
-"de l'element de configuració que cal configurar, seguit d'un breu\n"
-"resum de la configuració actual.\n"
-"Feu clic al botó \"%s\" corresponent per canviar-ho.\n"
-"\n"
-" * \"%s\": comproveu la configuració actual del mapa de teclat i\n"
-"canvieu-la si és necessari.\n"
-"\n"
-" * \"%s\": comproveu la selecció actual de país. Si no sou a aquest\n"
-"país, feu clic al botó \"%s\" i escolliu-ne un altre. Si el vostre\n"
-"país no és a la primera llista que es mostra, feu clic al botó \"%s\"\n"
-"per obtenir una llista de països completa.\n"
-"\n"
-" * \"%s\": per defecte, DrakX dedueix la vostra zona horària en\n"
-"funció del país que hagueu escollit. Aquí podeu fer clic al botó \"%s\"\n"
-"si no fos correcta.\n"
-"\n"
-" * \"%s\": comproveu la configuració actual del ratolí i feu clic al\n"
-"botó per canviar-la si fos necessari.\n"
-"\n"
-" * \"%s\": feu clic al botó \"%s\" per obrir l'auxiliar de configuració\n"
-"de la impressora. Consulteu el capítol corresponent de la ``Guia d'\n"
-"iniciació'' per tenir més informació sobre la configuració d'una nova\n"
-"impressora. Aquesta interfície és similar a la utilitzada durant la\n"
-"instal·lació.\n"
-"\n"
-" * \"%s\": si es detecta una targeta de so al vostre sistema, es\n"
-"mostra aquí. Si veieu que que no és la que realment teniu al sistema,\n"
-"podeu fer clic al botó per triar un altre controlador.\n"
-"\n"
-" * \"%s\": per defecte, DrakX configura la vostra interfície\n"
-"gràfica a una resolució de \"800x600\" or \"1024x768\". Si no us\n"
-"va bé, feu clic a \"%s\" per reconfigurar la interfície gràfica.\n"
-"\n"
-" * \"%s\": si es detecta una targeta de TV al sistema, es mostra\n"
-"aquí. Si en teniu una però no és detectada, feu clic a \"%s\" per\n"
-"intentar configurar-la manualment.\n"
-"\n"
-" * \"%s\": si es detecta una targeta XDSI al sistema, es mostra\n"
-"aquí. Podeu fer clic a \"%s\" per canviar els paràmetres associats\n"
-"amb la targeta.\n"
-"\n"
-" * \"%s\": si voleu configurar ara l'accés a Internet o a la xarxa local.\n"
-"\n"
-" * \"%s\": aquesta entrada un permet redefinir el nivell de seguretat\n"
-"definit en un pas anterior ().\n"
-"\n"
-" * \"%s\": si teniu previst connectar-vos a Internet, és bona idea\n"
-"protegir-vos d'intrusions instal·lant un tallafocs. Consulteu-ne\n"
-"els detalls a la secció corresponent de la ``Guia d'iniciació''.\n"
-"\n"
-" * \"%s\": si voleu canviar la configuració del carregador d'arrencada,\n"
-"feu clic a aquest botó. Es recomana que això només ho facin els usuaris\n"
-"avançats.\n"
-"\n"
-" * \"%s\": aquí podreu acabar d'ajustar els serveis que s'executaran\n"
-"en el vostre ordinador. Si teniu previst utilitzar aquesta màquina com\n"
-"a servidor, és aconsellable que reviseu aquesta configuració."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Fus horari"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "Targeta de TV"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "Targeta XDSI"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Interfície gràfica"
-
-#
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Xarxa"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Intermediaris"
-
-#
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Nivell de seguretat:"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Tallafoc"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Carregador d'arrencada"
-
-#
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Serveis"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Escolliu el disc dur que voleu buidar per instal·lar la nova partició\n"
-"Mandriva Linux. Aneu amb compte, totes les dades actuals es perdran i no\n"
-"es podran recuperar!"
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Feu clic a \"%s\" si voleu suprimir totes les dades i particions\n"
-"que hi ha en aquest disc dur. Aneu amb compte perquè, un cop\n"
-"hagueu fet clic a \"%s\", no podreu recuperar cap dada ni partició\n"
-"del disc, incloent les dades del Windows.\n"
-"\n"
-"Feu clic a \"%s\" per aturar aquesta operació sense perdre cap dada\n"
-"ni partició d'aquest disc."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Següent ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Anterior"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"No es pot accedir als mòduls del nucli corresponents al vostre nucli (no "
-"s'ha trobat el fitxer %s). Això generalment vol dir que el vostre disquet "
-"d'arrencada no està sincronitzat amb el suport d'instal·lació (si us plau, "
-"creeu un nou disquet d'arrencada)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "També heu de formatar %s"
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "Xarxa (http)"
-
-#
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "Xarxa (ftp)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "Inseriu el CD 1 un altre cop"
-
-#
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "No s'ha trobat cap dispositiu"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "Inseriu el CD"
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "No s'ha pogut muntar el CD-ROM"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "URL de la rèplica?"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "No s'ha pogut trobat el fitxer hdlist en aquest rèplica"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Canvieu el Cd-Rom!\n"
-"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i després\n"
-"premeu D'acord."
-
-#: install_any.pm:738
-#, fuzzy, c-format
-msgid "Copying in progress"
-msgstr "Detecció en procés"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Heu seleccionat el(s) servidor(s) següent(s): %s\n"
-"\n"
-"\n"
-"Aquests servidors estan activats per defecte. No tenen cap problema de "
-"seguretat\n"
-"conegut, però se'n podrien trobar de nous. Si fos així, caldrà que els "
-"actualitzeu\n"
-"tan aviat com sigui possible.\n"
-"\n"
-"\n"
-"Voleu realment instal·lar aquests servidors?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Se suprimiran els següents paquets per poder actualitzar el sistema: %s\n"
-"\n"
-"\n"
-"Voleu realment suprimir aquests paquets?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "S'ha produït un error en llegir el fitxer %s"
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr ""
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"S'ha produït un error: no s'han trobat dispositius vàlids on crear nous "
-"sistemes de fitxers. Si us plau, comproveu el vostre maquinari per trobar el "
-"problema"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, fuzzy, c-format
-msgid "Please choose a media"
-msgstr "Si us plau escolliu"
-
-#: install_any.pm:1698
-#, fuzzy, c-format
-msgid "Bad media %s"
-msgstr "s'ha afegit la font %s"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "El fitxer ja existeix. El voleu sobreescriure?"
-
-#
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "No es poden fer captures de pantalla abans de fer les particions"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Les captures estaran disponibles després d'instal·lar a %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Instal·lació del sistema"
-
-#
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Configuració del sistema"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Part del maquinari del vostre ordinador necessita controladors\n"
-"\"registrats\" per poder funcionar. Podeu trobar-ne informació a: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Heu de tenir una partició arrel.\n"
-"Per fer-ho, creeu una partició (o feu clic a una d'existent).\n"
-"Després, trieu l'acció \"Punt de muntatge\" i doneu-li el valor '/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"No teniu cap partició d'intercanvi.\n"
-"\n"
-"Voleu continuar igualment?"
-
-#
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Heu de tenir una partició FAT muntada en /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "No hi ha prou espai lliure per assignar noves particions"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Utilitza les particions existents"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "No hi ha cap partició que es pugui utilitzar"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Utilitza la partició Windows per al loopback"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Quina partició voleu utilitzar per al Linux4Win?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Escolliu les mides"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Mida de la partició arrel en MB: "
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Mida de la partició d'intercanvi en MB: "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"No hi ha cap partició FAT per utilitzar com a loopback (o no queda prou "
-"espai)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "A quina partició voleu canviar-li la mida?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"El redimensionador de la FAT no pot gestionar la vostra partició. \n"
-"S'ha produït l'error següent: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "S'està calculant la mida de la partició de Windows"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"La partició de Windows està massa fragmentada. Si us plau, reinicieu "
-"l'ordinador sota Windows i executeu l'eina \"defrag\". Llavors, torneu a "
-"començar la instal·lació del Mandriva Linux."
-
-#
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ATENCIÓ!\n"
-"\n"
-"Tot seguit, DrakX canviarà la mida de la vostra partició de Windows. Aneu\n"
-"amb compte: aquesta operació és perillosa. Si encara no ho heu fet, sortiu "
-"de\n"
-"la instal·lació, executeu \"chkdsk c:\" a la línia de comandes sota Windows\n"
-"(atenció el programa gràfic\"scandisk\" no és suficient, assegura't d'usar\n"
-"\"chkdsk\" en una línia de comandes), opcionalment executeu defrag, després\n"
-"torneu a començar la instal·lació. També haurieu de fer una còpia de "
-"seguretat\n"
-"de les vostres dades.\n"
-"Quan estigueu segur, premeu D'acord."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Quina mida voleu deixar per a la partició de Windows?"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "partició %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "S'està redimensionant la partició de Windows"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Ha fallat el redimensionament de la FAT: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"No hi ha cap partició FAT a la qual canviar la mida (o no queda prou espai)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Elimina el Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Teniu més d'un disc dur; en quin voleu instal·lar el Linux?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Es perdran TOTES les particions, i les dades que contenen, de la unitat %s"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Utilitza l'fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Ara podeu fer les particions a %s.\n"
-"Quan acabeu, no oblideu desar-les utilitzant 'w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "No es pot trobar espai per a la instal·lació"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr ""
-"L'auxiliar de particionament del DrakX ha trobat les solucions següents:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Ha fallat el particionament: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "S'està activant la xarxa"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "S'està desactivant la xarxa"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, fuzzy, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Introducció\n"
-"\n"
-"D'ara endavant, hom es referirà al sistema operatiu i als diferents\n"
-"components disponibles en la distribució Mandriva Linux com als\n"
-"\"Productes de programari\". Els Productes de programari inclouen,\n"
-"però no estan restringits a, el conjunt de programes, mètoDES, regles\n"
-"i documentació relativa al sistema operatiu i els diferents\n"
-"components de la distribució Mandriva Linux.\n"
-"\n"
-"\n"
-"1. Acord de llicència\n"
-"\n"
-"Si us plau, llegiu atentament aquest document. Aquest document és un\n"
-"acord de llicència entre la vostra persona i Mandriva S.A., que\n"
-"s'aplica als Productes de programari. Pel fet d'instal·lar, duplicar\n"
-"o utilitzar els Productes de programari en qualsevol forma esteu\n"
-"acceptant explícitament, i expressant el vostre acord a avenir-vos a\n"
-"les clàusules i condicions d'aquesta Llicència. Si no esteu d'acord\n"
-"amb qualsevol part de la Llicència, no esteu autoritzat a instal·lar,\n"
-"duplicar o utilitzar els Productes de programari. Qualsevol intent\n"
-"d'instal·lar, duplicar o utilitzar els Productes de programari en una\n"
-"forma que no s'adapti a les clàusules i condicions d'aquesta\n"
-"Llicència, és nul i finalitzarà els vostres drets sobre la mateixa.\n"
-"En finalitzar-se la Llicència, heu de destruir immediatament totes\n"
-"les còpies dels Productes de programari.\n"
-"\n"
-"\n"
-"2. Garantia limitada\n"
-"\n"
-"Els Productes de programari i documentació adjunta es subministren\n"
-"\"tal com són\", sense cap garantia, fins al punt permés per la llei.\n"
-"Mandriva S.A. no serà, sota cap circumstància, i fins al punt\n"
-"permés per la llei, responsable de cap dany especial, incidental ni\n"
-"directe (incloent, sense limitar-se a, els danys per pèrdua de\n"
-"negocis, interrupció de negocis, pèrdues financeres, multes i costes\n"
-"judicials, o qualsevol altre dany que resultin d'un judici, o\n"
-"qualsevol altre pèrdua d'importància) que resulti de l'ús o de la\n"
-"impossibilitat d'utilitzar els Productes de programari, fins i tot si\n"
-"Mandriva S.A. ha estat avisat de la possibilitat que\n"
-"s'esdevinguin aquests danys.\n"
-"\n"
-"RESPONSABILITAT LIMITADA RELATIVA A LA POSSESSIÓ O UTILITZACIÓ DE PROGRAMARI "
-"PROHIBIT EN ALGUNS PAÏSOS\n"
-"\n"
-"Fins al punt permés per la llei, Mandriva S.A. o els seus\n"
-"distribuïdors no seran, sota cap circumstància, responsables de cap\n"
-"dany especial, incidental ni directe (incloent, sense limitar-se a,\n"
-"els danys per pèrdua de negocis, interrupció de negocis, pèrdues\n"
-"financeres, multes i costes judicials, o qualsevol altre dany que\n"
-"resultin d'un judici, o qualsevol altre pèrdua d'importància) que\n"
-"resulti de la possessió i utilització dels components de programari o\n"
-"de la seva descàrrega des d'un dels llocs de Mandriva Linux, que\n"
-"estiguin prohibides o restringides en alguns països per les lleis\n"
-"locals. Aquesta responsabilitat limitada s'aplica, però no hi està\n"
-"restringida, als potents components criptogràfics inclosos als\n"
-"Productes de programari.\n"
-"\n"
-"\n"
-"3. la llicència GPL i llicències relacionades\n"
-"\n"
-"Els Productes de programari consisteixen en components creats per\n"
-"diferents persones o entitats. La majoria d'aquests components es\n"
-"regeixen per les clàusules i condicions de la Llicència General\n"
-"Pública de GNU, a la qual d'ara endavant hom s'hi referirà com a\n"
-"\"GPL\", o de llicències similars. la majoria d'aquestes llicències\n"
-"us permeten duplicar, adaptar o redistribuir els components que\n"
-"cobreixen. Si us plau, llegiu atentament les clàusules i condicions\n"
-"de l'acord de llicència de cada component abans d'utilitzar-lo.\n"
-"Qualsevol pregunta sobre la llicència d'un component s'ha d'adreçar\n"
-"al seu autor i no a Mandriva.\n"
-"Els programes desenvolupats per Mandriva S.A. es regeixen per la\n"
-"llicència GPL.La documentació escrita per Mandriva S.A. està regida per una\n"
-"llicència específica; consulteu la documentació per a més\n"
-"informació.\n"
-"\n"
-"\n"
-"4. Drets sobre la propietat intel·lectual\n"
-"\n"
-"Tots els drets sobre els components dels Productes de programari\n"
-"pertanyen als seus autors respectius i estan protegits per les lleis\n"
-"de propietat intel·lectual i de copyright aplicables als programes\n"
-"informàtics.\n"
-"Mandriva S.A. es reserva els drets de modificar o adaptar els\n"
-"Productes de programari, totalment o parcialment, per tots els\n"
-"mitjans i amb totes les finalitats.\n"
-"\"Mandriva\", \"Mandriva Linux\" i els logotips associats son marques\n"
-"registrades de Mandriva S.A.\n"
-"\n"
-"\n"
-"5. Lleis rectores \n"
-"\n"
-"Si qualsevol part d'aquest acord és declarat nul, il·legal o\n"
-"inaplicable per un tribunal, aquesta part s'exclourà del contracte.\n"
-"Seguiu obligat, però, per les altres seccions aplicables de\n"
-"l'acord.\n"
-"Les clàusules i condicions d'aquesta Llicència es regeixen per les\n"
-"lleis de França.\n"
-"Tots els litigis sobre les clàusules d'aquesta llicència es dirimiran\n"
-"preferiblement fora dels tribunals. Com a últim recurs, el litigi es\n"
-"portarà als tribunals competents de París, França.\n"
-"Per a qualsevol tema relacionat amb aquest document, poseu-vos en\n"
-"contacte amb Mandriva S.A.\n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"Avís: El programari lliure no està necessàriament lliure de patents, alguns "
-"dels programes\n"
-"lliures inclosos poden estar coberts per patents al teu país. Per exemple, "
-"els\n"
-"decodificadors MP3 inclosos poden necessitar una llicència per poder ser "
-"usats (consulteu\n"
-"http://www.mp3licensing.com per més detalls). Si no esteu segur si una "
-"patent és aplicable\n"
-"consulteu les lleis locals."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Avís\n"
-"\n"
-"Si us plau, llegiu atentament les clàusules següents. Si no esteu\n"
-"d'acord amb qualsevol d'elles, no esteu autoritzat a instal·lar\n"
-"els CD següents. Premeu 'Rebutja' per continuar la instal·lació\n"
-"sense utilitzar aquests CD.\n"
-"\n"
-"\n"
-"Alguns dels components que s'inclouen en aquest CD no estan\n"
-"regits per la llicència GPL o acords semblants. Cadascun d'aquests\n"
-"components es regeix per les clàusules i condicions de la seva\n"
-"pròpia llicència específica. Si us plau, llegiu atentament i\n"
-"accepteu aquestes llicències específiques abans d'utilitzar o\n"
-"redistribuir els components esmentats. En general, aquestes\n"
-"llicències impedeixen la transferència, duplicació (excepte amb\n"
-"la finalitat de fer-ne còpies de seguretat), redistribució,\n"
-"enginyeria inversa, desassemblatge, decompilació o modificació del\n"
-"component. Qualsevol violació de l'acord finalitzarà immediatament\n"
-"els vostres drets sobre la llicència específica. Tret que la\n"
-"llicència específica us en garanteixi els drets, normalment no\n"
-"podreu instal·lar els programes en més d'un sistema, ni adaptar-lo\n"
-"per utilitzar-lo en una xarxa. En cas de dubte, poseu-vos en\n"
-"contacte directament amb el distribuïdor o editor del component.\n"
-"La transferència a terceres parts i la còpia d'aquests components,\n"
-"incloent la documentació, estan en general prohibides.\n"
-"\n"
-"\n"
-"Tots els drets sobre els components del CD següent pertanyen als\n"
-"seus autors respectius i estan protegits per les lleis de\n"
-"propietat intel·lectual i de copyright aplicables als programes\n"
-"informàtics.\n"
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Felicitats! La instal·lació ha acabat.\n"
-"Traieu el suport d'arrencada i premeu Retorn per tornar a arrencar.\n"
-"\n"
-"\n"
-"Trobareu la solució als problemes coneguts d'aquesta versió del\n"
-"Mandriva Linux a la fe d'errates que hi ha a \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"La informació sobre com configurar el vostre sistema està disponible a\n"
-"l'últim capítol d'instal·lació de la Guia Oficial de l'Usuari del\n"
-"Mandriva Linux."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplica el punt de muntatge %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Alguns paquets importants no s'han instal·lat correctament.\n"
-"La vostra unitat de CD-ROM, o bé el CD-ROM, són defectuosos.\n"
-"Comproveu el CD-ROM en un ordinador instal·lat mitjançant \"rpm -qpl media/"
-"main/*.rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "S'està entrant en el pas '%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Selecció del grup de paquets"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Mida total: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Paquet incorrecte"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Versió: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Mida:"
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d kB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Importància:"
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "No podeu seleccionar/desseleccionar aquest paquet"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "degut a que falten %s"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "degut a %s no satisfetes"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr ""
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "per tal de mantenir %s"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"No podeu seleccionar aquest paquet perquè no queda prou espai per instal·lar-"
-"lo"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Ara s'instal·laran els paquets següents"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Ara s'eliminaran els paquets següents"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Aquest paquet és obligatori; no es pot desseleccionar"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "No podeu desseleccionar aquest paquet; ja està instal·lat"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Aquest paquet s'ha d'actualitzar.\n"
-"Esteu segur que voleu desseleccionar-lo?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "No podeu desseleccionar aquest paquet; s'ha d'actualitzar"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Mostra automàticament els paquets seleccionats"
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "Carrega/Desa la selecció"
-
-#
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "S'està actualitzant la selecció de paquets"
-
-#
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Instal·lació mínima"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Escolliu els paquets que voleu instal·lar"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "S'està instal·lant"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "S'està estimant"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Sense detalls"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Temps restant "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Espereu si us plau, s'està preparant la instal·lació..."
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d paquets"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "S'està instal·lant el paquet %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Rebutja"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Canvieu el Cd-Rom!\n"
-"Si us plau, inseriu el CD-ROM etiquetat com \"%s\" a la unitat i després\n"
-"premeu D'acord.\n"
-"Si no el teniu, premeu Cancel·la per no fer la instal·lació des d'aquest Cd-"
-"Rom."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "S'ha produït un error en ordenar els paquets:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Voleu seguir igualment?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "S'ha produït un error en instal·lar els paquets:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "no configurat(da)"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Acord de llicència"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr ""
-
-#
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Si us plau, seleccioneu la disposició del vostre teclat."
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Aquesta és la llista completa de teclats disponibles"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Instal·la/Actualitza"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Es tracta d'una instal·lació o d'una actualització?"
-
-#
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Actualitza %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Clau de xifratge per a %s"
-
-#
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Si us plau, seleccioneu el tipus del vostre ratolí."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Port del ratolí"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Si us plau, seleccioneu el port sèrie a què està connectat el ratolí."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Emulació dels botons"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulació del botó 2"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulació del botó 3"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "S'estan configurant les targetes PCMCIA..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "S'està configurant l'IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "No hi ha particions disponibles"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "S'estan explorant les particions per trobar els punts de muntatge"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Escolliu els punts de muntatge"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"No hi ha prou espai lliure per un 1MB de bootstrap! La instal·lació "
-"continuarà, però per iniciar el sistema necessitareu crear la partició de "
-"bootstrap amb el DiskDrake"
-
-#: install_steps_interactive.pm:317
-#, fuzzy, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"No hi ha prou espai lliure per un 1MB de bootstrap! La instal·lació "
-"continuarà, però per iniciar el sistema necessitareu crear la partició de "
-"bootstrap amb el DiskDrake"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Escolliu les particions que voleu formatar"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Voleu comprovar els blocs incorrectes?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"És impossible de comprovar el sistema de fitxers %s. Voleu reparar els "
-"errors? (Vigileu, podríeu perdre dades.)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"No hi ha prou espai d'intercanvi per completar la instal·lació; si us plau, "
-"afegiu-ne"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"S'estan cercant els paquets disponibles i reconstruint la base de dades "
-"d'rpm..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "S'estan cercant els paquets disponibles..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "S'estan cercant els paquets ja instal·lats..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "S'estan cercant els paquets a actualitzar"
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Escolliu una rèplica des de la qual aconseguir els paquets"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Al vostre sistema no li queda prou espai per a la instal·lació o "
-"actualització (%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, fuzzy, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Si us plau, carregueu o deseu la selecció de paquets en el disquet.\n"
-"El format és el mateix que en els disquets generats d'instal·lació "
-"automàtica."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Càrrega"
-
-#
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Desa"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "Fitxer incorrecte"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "La mida seleccionada és superior a la disponible"
-
-#
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Tipus d'instal·lació"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"No heu seleccionat cap grup de paquets.\n"
-"Escolliu la instal·lació mínima que voleu:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Amb la documentació bàsica (recomanat!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Instal·lació realment mínima (especialment no urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Tots"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Si teniu tots els CD de la llista de sota, feu clic a 'D'acord'.\n"
-"Si no teniu cap d'aquests CD, feu clic a 'Cancel·la'.\n"
-"Si només falten alguns CD, desseleccioneu-los i feu clic a 'D'acord'."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM etiquetat com \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "S'està preparant la instal·lació"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"S'està instal·lant el paquet %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Configuració posterior a la instal·lació"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"Ara teniu l'oportunitat de baixar paquets actualitzats. Aquests paquets\n"
-"han estat actualitzats després de la publicació de la distribució. Poden "
-"contenir\n"
-"actualitzacions de seguretat o correccions d'errors.\n"
-"\n"
-"Per baixar aquests paquets necessitareu tenir una connexió a Internet\n"
-"operativa.\n"
-"\n"
-"Voleu instal·lar les actualitzacions?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr ""
-"S'està contactant amb la rèplica per obtenir la llista dels paquets "
-"disponibles..."
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "No es pot contactar amb la rèplica: %s"
-
-#
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Voleu tornar-ho a provar?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "En quina zona horària us trobeu?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Sincronització automàtica de la hora (usant NTP)"
-
-#
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "Servidor NTP"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Resum"
-
-#
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Sistema"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Maquinari"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Servidor CUPS remot"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Cap impressora"
-
-#
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Teniu una targeta de so ISA?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Executeu \"alsacont\" després de la instal·lació per configurar la targeta "
-"de so"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"No s'ha detectat cap targeta de so. Proveu amb \"harddrake\" després de la "
-"instal·lació"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Interfície gràfica"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Xarxa i Internet"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "configurat"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Seguretat"
-
-#
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "activat"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "inhabilita"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Arrencada"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s a %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Serveis: %d activats per %d registrats"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "No heu configurat X. Segur que ho voleu així?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "S'està preparant el carregador de l'arrencada..."
-
-#: install_steps_interactive.pm:1230
-#, fuzzy, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Sembla que teniu un OldWorld o una màquina\n"
-"desconeguda; el carregador d'arrencada yaboot no us funcionarà.\n"
-"La instal·lació continuarà, però us caldrà utilitzar el BootX\n"
-"o algun altre mètode per arrencar l'ordinador"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Voleu utilitzar l'aboot?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"S'ha produït un error en instal·lar l'aboot. \n"
-"Voleu intentar igualment la instal·lació encara que això destrueixi la "
-"primera partició?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"En quest nivell de seguretat, l'accés a les particions de Windows està "
-"restringit a l'administrador."
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Inseriu un disquet en blanc a la unitat %s"
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Si us plau inseriu un altre disquet pel disquet de controladors"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "S'està creant el disquet d'instal·lació automàtica"
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Alguns passos no s'han completat.\n"
-"\n"
-"Segur que voleu sortir ara?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Genera un disquet per a la instal·lació automàtica"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Si ho desitgeu, la instal·lació automàtica es pot\n"
-"automatitzar completament, però en aquest cas\n"
-"prendrà el control del disc dur!\n"
-"(Això està pensat per a la instal·lació en un altre ordinador.)\n"
-"\n"
-"Potser preferireu repetir la instal·lació.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> entre elements  | <Espai> selecciona | <F12> pant. següent"
-
-#
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Trieu un fitxer"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Afegeix"
-
-#
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Modifica"
-
-#
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Elimina"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Bàsic"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Fi"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Fes"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Elecció incorrecta, torneu-ho a intentar\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Quina és la vostra elecció? (predeterminat %s)"
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entrades que heu d'emplenar:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Quina és la vostra elecció? (0/1, predeterminat '%s')"
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Botó '%s': %s"
-
-#
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Voleu fer clic en aquest botó?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Quina és la vostra elecció? (predeterminat '%s'%s)"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr " entreu 'void' per entrada buida"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Hi ha moltes coses per escollir de (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Si us plau, escolliu el primer número del rang 10 que voleu editar,\n"
-"o premeu Retorn per continuar.\n"
-"Què trieu? "
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Avís, una etiqueta ha canviat:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Torna a enviar"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Txec (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Alemany"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Espanyol"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Finès"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Francès"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Noruec"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Polonès"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Rus"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Suec"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "Teclat Regne Unit"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "Teclat Estats Units"
-
-#
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albanès"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Armeni (antic)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Armeni (màquina d'escriure)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Armeni (fonètic)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Àrab"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Azerbaidjanès (llatí)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belga"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bengalí (disposició Inscript)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bengalí (disposició probhat)"
-
-#
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Búlgar (fonètic)"
-
-#
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Búlgar (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brasiler (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosnià"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Bielorrús"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Suís (disposició alemanya)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Suís (disposició francesa)"
-
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr ""
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Txec (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Alemany (sense tecles inoperatives)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanagari"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Danès"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (Estats Units)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Esperanto)"
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Francès)"
-
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (Regne Unit)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Noruec)"
-
-#
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (Polonès)"
-
-#
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (Suec)"
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr ""
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estonià"
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr ""
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Georgià (disposició \"russa\")"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Georgià (disposició \"llatina\")"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Grec"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Grec (politònic)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Gujarati"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Gurmukhi"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Croata"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Hongarès"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Irlandès"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Israelià"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Israelià (fonètic)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Iranià"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Islandès"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Italià"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Inuktitut"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Japonès de 106 tecles"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kannada"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Teclat coreà"
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr ""
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr ""
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Espanyol sud-americà"
-
-#
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laosià"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Lituà AZERTY (antic)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Lituà AZERTY (nou)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Lituà \"fila de números\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituà \"fonètic\" QWERTY"
-
-#
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Letó"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malaialam"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Macedoni"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Myanmar (Burmese)"
-
-#
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongol (ciríl·lic)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Maltès (Regne Unit)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Maltès (Estats Units)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Holandès"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Oriya"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Polonès (disposició qwerty)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Polonès (disposició qwertz)"
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr ""
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portuguès"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Canadenc (Quebec)"
-
-#
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Romanès (qwertz)"
-
-#
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Romanès (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Rus (fonètic)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Saami (Noruec)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Saami (suec/finès)"
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr ""
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Eslovè"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Eslovac (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Eslovac (QWERTY)"
-
-#
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Serbi (ciríl·lic)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Siri"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Siri (fonètic)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telugu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tàmil (disposició ISCII)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tàmil (disposició de màquina d'escriure)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr ""
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Tai (TIS-820)"
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr ""
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Teclat tadjik"
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr ""
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Turc (tradicional, model \"F\")"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Turc (modern, model \"Q\")"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ucraïnès"
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr ""
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "Teclat Estats Units (internacional)"
-
-#
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Uzbek (ciríl·lic)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamita \"fila numèrica\" QWERTY"
-
-#
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Iugoslau (llatí)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Tecla d'Alternativa Gràfica"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Les dues tecles de Majúscules simultàniament"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Tecles de Control i de Majúscules simultàniament"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "Tecla de Fixació de Majúscules"
-
-#: keyboard.pm:339
-#, fuzzy, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Tecles de Control i d'Alternativa simultàniament"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Tecles de Control i d'Alternativa simultàniament"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Tecles d'Alternativa i de Majúscules simultàniament"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "tecla de \"Menú\""
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Tecla de \"Windows\" Esquerra"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Tecla de \"Windows\" Dreta"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Les dues tecles Ctrl simultàniament"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Les dues tecles Alt simultàniament"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Tecla Maj Esquerra"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Tecla Maj dreta"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Tecla Alt esquerra"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Tecla de control esquerra"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Tecla Control dret"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Aquí podeu triar la tecla o la combinació de tecles que \n"
-"permetran canviar entre diferents disposicions de teclat\n"
-"(p.ex., llatina i no llatina)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andorra"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Unió dels Emirats Àrabs"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afganistan"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua i Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albània"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Armènia"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Antilles Holandeses"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antàrtida"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Argentina"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Samoa Americana"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaitjan"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bòsnia i Hercegovina"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbados"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bulgària"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benín"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolívia"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahames"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Illa Bouvet"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Botswana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Bielorrússia"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Belize"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Illes Cocos (Keeling)"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "República Centrefricana"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Costa d'Ivori"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Illes Cook"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Xile"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Camerun"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Xina"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Colòmbia"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Sèrbia i Montenegro"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Cuba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Cap Verd"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Illa Christmas"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Xipre"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "República Dominicana"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Algèria"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Equador"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Egipte"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Sàhara Occidental"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Etiòpia"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fiji"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Illes Malvines (Falkland)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Micronèsia"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Illes Fèroe"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gabon"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Regne Unit"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenada"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Geòrgia"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Guaiana Francesa"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Ghana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Groenlàndia"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gàmbia"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Guinea"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Guadalupe"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Guinea Equatorial"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Illes Geòrgia del Sud i Sandwich del Sud"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Guam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea Bissau"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Guyana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Xina (Hong Kong)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Illa Heard i Illes McDonald"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Hondures"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Croàcia"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haití"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonèsia"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Índia"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Territori Britànic de l'Oceà Índic"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Iraq"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Iran"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Islàndia"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Jordània"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenya"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirguizistan"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Cambodja"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Comores"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Christopher i Nevis"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Corea (Nord)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Corea"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Illes Caiman"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Líban"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Libèria"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Lituània"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Letònia"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Líbia"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Marroc"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Mònaco"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldàvia"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Illes Marshall"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Macedònia"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongòlia"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Illes Marianes del Nord"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martinica"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Mauritània"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malta"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Maurici"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Maldives"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malawi"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Mèxic"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malàisia"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Moçambic"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namíbia"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Nova Caledònia"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Níger"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Illa Norfolk"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nigèria"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepal"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauru"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Oman"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panamà"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Perú"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Polinèsia francesa"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nova Guinea"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Filipines"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre i Miquelon"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paraguai"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palau"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Qatar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Reunion"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Romania"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Aràbia Saudita"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Illes Salomó"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sudan"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapur"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Eslovènia"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Illes Svalbard i Jan Mayen"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senegal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somàlia"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Surinam"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome i Príncipe"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Síria"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Swazilàndia"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Illes Turks i Caicos"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Txad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "Territoris francesos del Sud"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tadjikistan"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Timor Oriental"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunísia"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tonga"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Turquia"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinitat i Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzània"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ucraïna"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Uganda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Illes Perifèriques Menors dels EUA"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Uruguai"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
-
-#
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vaticà"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent i les Grenadines"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Veneçuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Illes Verge Britàniques"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Illes Verge Americanes"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis i Futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoa"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Iemen"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zàmbia"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "Hauríeu d'instal·lar els següents paquets: %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Benvingut a %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Muntatges circulars %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Elimineu primer els volums lògics\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Paràmetres"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "CAP"
-
-#
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Configuració dels mòduls"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Ara podeu configurar cada paràmetre del mòdul."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "S'han trobat interfícies %s"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "En teniu una altra?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Teniu alguna interfície %s?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Mira la informació del maquinari"
-
-#: modules/interactive.pm:82
-#, fuzzy, c-format
-msgid "Installing driver for USB controller"
-msgstr "S'està instal·lant el controlador per a la targeta de %s %s"
-
-#: modules/interactive.pm:83
-#, fuzzy, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "S'està instal·lant el controlador per a la targeta de %s %s"
-
-#: modules/interactive.pm:84
-#, fuzzy, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "S'està instal·lant el controlador per a la targeta de %s %s"
-
-#: modules/interactive.pm:85
-#, fuzzy, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "S'està instal·lant el controlador per a la targeta de %s %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "S'està instal·lant el controlador per a la targeta de %s %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(mòdul %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Ara podeu subministrar les opcions per al mòdul %s.\n"
-"Tingueu en compte que qualsevol adreça s'ha de prefixar amb 0x, com '0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Ara podeu proporcionar les opcions per al mòdul %s.\n"
-"Les opcions estan en el format \"nom=valor nom2=valor2 ...\".\n"
-"Per exemple, \"io=0x300 irq=7\""
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Opcions del mòdul:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Quin controlador de %s he de provar?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"En alguns casos, el controlador de %s necessita informació addicional\n"
-"per funcionar correctament, tot i que normalment funciona bé sense ella.\n"
-"Voleu especificar opcions addicionals o deixar que el controlador\n"
-"cerqui al vostre ordinador la informació que necessita? Aquesta recerca\n"
-"podria penjar l'ordinador, però això no causaria cap dany."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Exploració automàtica"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Especifica les opcions"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ha fallat la càrrega del mòdul %s.\n"
-"Voleu tornar-ho a intentar amb altres paràmetres?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "un número"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d nombres separats per coma"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d cadenes separades per coma"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "nombres separats per coma"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "cadenes separades per coma"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Ratolí de Sun"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Estàndard"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Ratolí PS2 genèric amb rodeta"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Automàtic"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 botó"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Ratolí genèric de 2 botons"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Ratolí genèric de 3 botons amb emulació de rodeta"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Rodeta"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "sèrie"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Ratolí genèric de 3 botons"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan amb emulació de rodeta"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Series amb emulació de rodeta"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sèrie, tipus C7 antic)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Mouse (sèrie, tipus C7 antic) amb emulació de rodeta"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse amb emulació de rodeta"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "busmouse"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 botons"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 botons"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3·botons amb emulació de rodeta"
-
-#
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Universal"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Qualsevol ratolí PS/2 o USB"
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "cap"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Cap ratolí"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Synaptics Touchpad"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Si us plau proveu el ratolí."
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Per activar el ratolí,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVEU LA RODETA!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "utilitza PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "utilitza PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "utilitza DHCP"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel Speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - s'ha detectat"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem USB (utilitzant PPPoA)"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem USB (utilitzant DHCP)"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Connecta't a Internet"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"La manera més habitual de connectar amb ADSL és pppoe.\n"
-"Algunes connexions utilitzen PPTP, unes poques utilitzen DHCP.\n"
-"Si no ho sabeu, escolliu 'utilitza PPPoE'"
-
-#
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "Tipus de connexió ADSL :"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Servidor Web"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Servidor de Noms de Domini (DNS)"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "Servidor SSH"
-
-#
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "Servidor FTP"
-
-#
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Servidor de correu"
-
-#
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "Servidor POP i IMAP"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Servidor telnet"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "Servidor CUPS"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Petició echo (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "BitTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"Configuració del drakfirewall\n"
-"\n"
-"Aquí es configura un tallafocs personal per a aquest ordinador Mandriva "
-"Linux.\n"
-"Per a una potent solució de tallafocs dedicada, consulteu si us plau la \n"
-"distribució especialitzada Mandriva Security Firewall."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Configuració del drakfirewall\n"
-"\n"
-"Assegureu-vos d'haver configurat l'accés a la xarxa local/Internet\n"
-"amb el drakconnect abans de continuar."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "A quins serveis voleu permetre la connexió des d'Internet?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Podeu introduir diferents ports.\n"
-"Són exemples vàlids: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Cerqueu informació a /etc/services"
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"El port introduït no és vàlid: %s.\n"
-"El format correcte és \"port/tcp\" o \"port/udp\", \n"
-"on el port es troba entre 1 i 65535.\n"
-"\n"
-"També podeu donar rangs de ports (exemple: 24300:24350/udp)"
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Tot (sense tallafoc)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Altres ports"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "No ho sé"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Manual"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "Selecció manual"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Targeta XDSI interna"
-
-#
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Configuració manual"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "IP automàtica (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "IP automàtica (BOOTP/DHCP/Zeroconf)"
-
-#
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocol per a la resta del món"
-
-#
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocol europeu (EDSS1)"
-
-#
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protocol per a la resta del món\n"
-"Cap canal D (línies punt a punt)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Mòdem Alcatel Speedtouch USB"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Mòdem Sagem USB"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Mòdem Bewan PCI"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "Mòdem ECI Hi-Focus"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Protocol de configuració d'ordinadors dinàmic (DHCP)"
-
-#
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Configuració TCP/IP manual"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "Protocol de tunneling punt a punt (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP sobre Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP sobre ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr ""
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr ""
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr ""
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr ""
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Basat en script"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Basat en terminal"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Configuració de xarxa i internet"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(detectat al port %s)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(detectat %s)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(detectat)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "Connexió LAN"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Connexió sense fils"
-
-#
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "Connexió ADSL"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Connexió per cable"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "Connexió XDSI"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Connexió del mòdem"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Escolliu la connexió que voleu configurar"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Ara es configurarà la connexió %s.\n"
-"\n"
-"\n"
-"Premeu \"%s\" per continuar."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Configuració de la connexió"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Si us plau, ompliu o marqueu el camp inferior"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ de la targeta"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Targeta de memòria (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "E/S de la Targeta"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "E/S_0 de la Targeta"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "E/S_1 de la Targeta"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "El vostre telèfon particular"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nom del proveïdor (p.ex. proveïdor.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Número de telèfon del proveïdor"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "DNS 1 del proveïdor (opcional)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "DNS 2 del proveïdor (opcional)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Mode de marcatge"
-
-#
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Velocitat de la connexió"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Temps màxim per connectar (en seg)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Entrada del compte (nom d'usuari)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Contrasenya del compte"
-
-#: network/netconnect.pm:382
-#, fuzzy, c-format
-msgid "Cable: account options"
-msgstr "Marcatge: Opcions del compte"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Escolliu la interfície de xarxa a configurar:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Dispositiu de xarxa"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Mòdem XDSI extern"
-
-#
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Seleccioneu un dispositiu!"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Configuració de l'XDSI"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Quin tipus de targeta teniu?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Si teniu una targeta ISA, els valors de la pantalla següent haurien de ser "
-"correctes.\n"
-"\n"
-"Si teniu una targeta PCMCIA, cal que en sapigueu l'\"irq\" i l'\"io\".\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Continua"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Abandona"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Quina d'aquestes targetes XDSI teniu?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Controlador"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Quin protocol voleu utilitzar?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protocol"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Seleccioneu el vostre proveïdor.\n"
-"Si no és a la llista, seleccioneu \"No és a la llista\""
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Proveïdor:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"El vostre mòdem no està suportat pel sistema.\n"
-"Doneu un cop d'ull a http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Escolliu el mòdem a configurar:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port sèrie al qual teniu connectat el mòdem."
-
-#
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Seleccioneu el vostre proveïdor:"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Marcatge: Opcions del compte"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Nom de la connexió"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Número de telèfon"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "ID d'entrada"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "Marcatge: Paràmetres IP"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "Paràmetres IP"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "Adreça IP"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Màscara de la subxarxa"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Marcatge: Paràmetres DNS"
-
-#
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Nom de domini"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Primer servidor DNS (opcional)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Segon servidor DNS (opcional)"
-
-#
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "Estableix el nom de la màquina a partir de la IP"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Passarel·la"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "Adreça IP de la passarel·la"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "Configuració ADSL"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Si us plau, seleccioneu el vostre proveïdor ADSL"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"Necessiteu el microcodi Alcatel.\n"
-"Podeu proporcionar-lo ara a través d'un disquet o la vostra partició de\n"
-"windows, o fer-ho més tard."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Usa un disquet"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Usa la meva partició de Windows"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Fes-ho després"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "La còpia del firmware ha fallat. no s'ha trobat el fitxer %s"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "La còpia del firmware ha tingut èxit"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Us cal el microcodi alcatel.\n"
-"Baixeu-lo des de\n"
-"%s\n"
-"i copieu l'mgmt.o que és a /usr/share/speedtouch"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "ID de camí virtual (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "ID de circuit virtual (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "Encapsulat :"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"El mòdem ECI Hi-Focus no està suportat a causa de problemes amb la "
-"distribució de binaris del controlador.\n"
-"\n"
-"Podeu trobar un controlador a http://eciadsl.flashtux.org/"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "Carrega un controlador manualment"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "No es pot instal·lar el paquet %s!"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr ""
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "S'està configurant el dispositiu de xarxa %s (controlador %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-"Es poden usar els següents protocols per configurar una connexió LAN. Si us "
-"plau escolliu el que voleu usar"
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Si us plau, introduïu la configuració IP d'aquest ordinador.\n"
-"S'ha d'introduir cada element com una adreça IP en notació decimal amb\n"
-"punts (per exemple, 1.2.3.4)."
-
-#
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Assigna un nom d'ordinador a partir de l'adreça DHCP"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "Nom DHCP de l'ordinador"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Submàscara de xarxa"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-"Fes el seguiment de l'identificador de la targeta de xarxa (d'utilitat per a "
-"portàtils)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "\"Hotplugging\" de xarxa"
-
-#
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Inicia en l'arrencada"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "Mètrica"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "Client DHCP"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Temps màxim per connectar (en seg)"
-
-#
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "IP del Servidor DNS"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "L'adreça IP ha d'estar en format 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "L'adreça de la passarel·la ha d'estar en format 1.2.3.4"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "Atenció: l'adreça IP %s està reservada, normalment!"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s ja és en ús\n"
-
-#: network/netconnect.pm:1167
-#, fuzzy, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Selecció d'un programa de control arbitrari"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, fuzzy, c-format
-msgid "Install a new driver"
-msgstr "Carrega un controlador manualment"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "Si us plau introduïu els paràmetres per aquesta targeta sense fils:"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "Mode de funcionament"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Ad-hoc"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Gestionat"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Mestre"
-
-#
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Repetidor"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Secundari"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Automàtic"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Nom de la xarxa (ESSID)"
-
-#
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "ID de xarxa"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "Freqüència de funcionament"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr ""
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Taxa de bits (en b/s)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "Fragmentació"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Arguments extra per a lwconfig"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Arguments extra per a lwspy"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Arguments extra per a lwpriv"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"La freqüència ha de tenir el sufix k, M o G (per exemple, \"2,46G\" per a la "
-"freqüència de 2,46 GHz), or afegir prou '0' (zeros)."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"La velocitat ha de tenir el sufix k, M o G (per exemple, \"11M\" per a 11M), "
-"o afegir prou '0' (zeros)."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Si us plau, introduïu el nom del vostre ordinador.\n"
-"Aquest nom ha de ser complet, com ara \"mybox.mylab.myco.com\".\n"
-"També podeu introduir l'adreça IP de la passarel·la, si en teniu una."
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-"Finalment però no menys important podeu introduir les adreces IP dels "
-"vostres servidors DNS."
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Nom de l'ordinador (opcional)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Nom de l'ordinador"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "Servidor DNS 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "Servidor DNS 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "Servidor DNS 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "Domini de cerca"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Passarel·la (e.g. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Dispositiu de la passarel·la"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "L'adreça del servidor DNS ha d'estar en format 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "L'adreça de la passarel·la ha d'estar en format 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Nom Zeroconf de l'ordinador"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "El nom de l'ordinador del Zeroconf no ha de contenir cap ."
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Heu configurat múltiples maneres de connectar-se a Internet.\n"
-"Escolliu la que voleu utilitzar.\n"
-"\n"
-
-#
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Connexió a Internet"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "La configuració és completa, voleu aplicar els paràmetres?"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Voleu iniciar la connexió en arrencar?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Voleu iniciar la connexió en arrencar?"
-
-#
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "Automàticament en arrencar"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Com voleu marcar aquesta connexió?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Cal reiniciar la xarxa. La voleu reiniciar?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Configuració de xarxa"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"S'ha produït un problema en reiniciar la xarxa: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Voleu intentar connectar-vos a Internet ara?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "S'està comprovant la vostra connexió..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ara, el sistema està connectat a Internet."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Per raons de seguretat, ara es desconnectarà."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"No sembla que el sistema estigui connectat a Internet.\n"
-"Intenteu tornar a configurar la connexió."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr "Felicitats, la configuració de xarxa i d'Internet ha finalitzat.\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Després d'això, és recomanable que reinicieu l'entorn X per\n"
-"evitar problemes deguts al canvi de nom de l'ordinador."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Hi ha hagut problemes durant la configuració.\n"
-"Proveu la connexió via net_monitor o mcc. Si la connexió no funciona "
-"correctament, torneu a executar la configuració."
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Atès que esteu realitzant una instal·lació des de xarxa, ja teniu la xarxa "
-"configurada.\n"
-"Feu clic a 'D'acord' per conservar la configuració, o a 'Cancel·la' per "
-"tornar a configurar la connexió a Internet i a la xarxa local.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"Hi ha hagut un error no esperat:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Configuració dels servidors intermediaris (proxies)"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "Intermediari per a HTTP"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "Intermediari per a FTP"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "El servidor intermediari ha de ser http://..."
-
-#
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "L'URL ha de començar amb 'ftp:' o 'http:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "S'ha detectat la configuració del tallafoc!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Atenció! S'ha detectat una configuració existent del tallafoc. Potser us "
-"caldrà fer algun ajustament manual després de la instal·lació."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"Si us plau, introduïu el nom de la interfície connectada a Internet.\n"
-"\n"
-"Exemples:\n"
-"\t\tppp+ per a mòdem o connexions DSL, \n"
-"\t\teth0, o eth1 per a connexions de cable, \n"
-"\t\tippp+ per a connexions XDSI.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Inseriu un disquet"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Inseriu un disquet formatat amb FAT a la unitat %s amb %s a el directori "
-"arrel i premeu %s"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Error d'accés al disquet, no s'ha pogut muntar el dispositiu %s"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "ha fallat el muntatge: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Aquesta plataforma no suporta particions ampliades"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Hi ha un forat a la vostra taula de particions, però no puc utilitzar-lo.\n"
-"L'única solució és moure les particions primàries per fer que el forat quedi "
-"contigu a les particions ampliades"
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Ha fallat la restauració des del fitxer %s: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Fitxer de còpia de seguretat incorrecte"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "S'ha produït un error en escriure al fitxer %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Alguna cosa no va bé en la vostra unitat. \n"
-"Ha fallat una comprovació de la integritat de les dades. \n"
-"Això vol dir que qualsevol cosa que s'escrigui al disc acabarà amb dates "
-"aleatòries i malmeses."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "s'ha de tenir"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "important"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "molt bonic"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "bonic"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "potser"
-
-#: pkgs.pm:481
-#, c-format
-msgid "Downloading file %s..."
-msgstr "S'està descarregant el fitxer %s..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(en %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(en aquest ordinador)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Configurat a d'altres ordinadors"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "en servidor CUPS \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Predeterminat)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Print, Do not Queue"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Common Unix Printing System (servidor remot)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "CUPS remot"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Model desconegut"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Impressora local"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Impressora remota"
-
-#
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Impressora en servidor CUPS remot"
-
-#
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Impressora en servidor lpd remot"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Impressora de xarxa (TCP/Socket)"
-
-#
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Impressora en servidor SMB/Windows 95/98/NT"
-
-#
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Impressora en servidor NetWare"
-
-#
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Entreu un dispositiu URI d'impressora"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Redirecciona el treball cap a una ordre"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "recomanat"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Model desconegut"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "Configurat en aquest ordinador"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " en port paral·lel #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", impressora USB #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", impressora USB"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", impressora HP en un port paral·lel"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", impressora HP en USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", impressora HP en HP JetDirect"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", impressora HP"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", dispositiu multifunció en port paral·lel #%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", dispositiu multifunció en un port paral·lel"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", dispositiu multifunció en USB"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dispositiu multifunció en HP JetDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", dispositiu multifunció"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", imprimint a %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " en servidor LPD \"%s\", impressora \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", host TCP/IP \"%s\", port %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " en servidor SMB/Windows \"%s\", recurs compartit \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " en servidor Novell \"%s\", impressora \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", utilitzant l'ordre %s"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Port paral·lel #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "Impressora USB #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "Impressora USB"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "Impressora HP en un port paral·lel"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "Impressora HP en USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "Impressora HP en HP JetDirect"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "Impressora HP"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Dispositiu multifunció en port paral·lel #%s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "Dispositiu multifunció en un port paral·lel"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "Dispositiu multifunció en USB"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "Dispositiu multifunció en HP JetDirect"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Dispositiu multifunció"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Imprimeix a %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "Servidor LPD \"%s\", impressora \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "Host TCP/IP \"%s\", port %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "Servidor SMB/Windows \"%s\", recurs compartit \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Servidor Novell \"%s\", impressora \"%s\""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "Utilitza l'ordre %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Impressora en cru (raw) (Cap controlador)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Xarxa(es) local(s)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfície \"%s\""
-
-#
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Xarxa %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Ordinador %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Cal penjar el microprogramari de l'HP LaserJet 1000 després d'activar-la. "
-"Baixeu el paquet de programes de control per a Windows des del lloc web d'HP "
-"(el microprogramari que hi ha al CD de la impressora no funciona) i extrèieu-"
-"ne el fitxer de microprogramari descomprimint el fitxer '.exe' autoextraïble "
-"amb la utilitat 'unzip' i cercant el fitxer 'sihp1000.img'. Copieu aquest "
-"fitxer al directori '/etc/printer', on la seqüència penjadora el trobarà, el "
-"penjarà i l'activarà allà on la impressora estigui connectada.\n"
-
-#
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "Configuració de la impressora CUPS"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Aquí podeu decidir si s'ha de poder accedir a les impressores connectades a "
-"aquesta màquina des de màquines remotes, i des de quines d'elles."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"També podeu decidir aquí si aquesta màquina ha de poder accedir "
-"automàticament a les impressores de màquines remotes."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Les impressores d'aquesta màquina són accessibles a altres ordinadors"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Cerca automàticament impressores disponibles en màquines remotes"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Compartició d'impressores a ordinadors centrals/xarxes:"
-
-#
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Configuració personalitzada"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Cap màquina remota"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Servidors CUPS addicionals:"
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Per obtenir accés a les impressores en servidors CUPS remots de la vostra "
-"xarxa local només cal que activeu l'opció \"Cerca automàticament les "
-"impressores disponibles en màquines remotes\"; els servidors CUPS informen "
-"automàticament a la vostra màquina de les impressores que tenen. Totes les "
-"impressores conegudes per la vostra màquina són a la secció \"Impressores "
-"remotes\" de la finestra principal del Printerdrake. Si el vostre servidor o "
-"servidors CUPS no són a la vostra xarxa local, per obtenir del servidor la "
-"informació de la impressora us caldrà introduir aquí la o les adreces IP i "
-"opcionalment el o els números de port."
-
-#
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Mode d'impressió de text en japonès"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Si ho activeu podreu imprimir fitxers de text en japonès. Utilitzeu aquest "
-"funció només si heu d'imprimir textos en japonès, ja que si és activada ja "
-"no podreu imprimir caràcters accentuats en tipus de lletra llatins ni podreu "
-"ajustar els marges, la mida del caràcter, etc. Aquest paràmetre només afecta "
-"a les impressores definides en aquesta màquina; si voleu imprimir text en "
-"japonès en una impressora configurada en una màquina remota, caldrà que hi "
-"activeu aquesta funció."
-
-#
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Correcció automàtica de la configuració CUPS"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Quan s'activa aquesta opció, cada vegada que el CUPS s'iniciï s'assegurarà "
-"que\n"
-"\n"
-"- si LPD/LPRng està instal·lat, /etc/printcap no sigui sobreeescrit pel "
-"CUPS\n"
-"\n"
-"- si /etc/cups/cupsd.conf no hi és, es creï\n"
-"\n"
-"- quan es difongui la informació de la impressora, no contingui  \"localhost"
-"\" com a nom de servidor.\n"
-"\n"
-"Si alguna d'aquestes mesures us porta problemes desactiveu aquesta opció, "
-"però us caldrà anar amb compte amb aquest punts."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr "Servidor remot CUPS i dimoni CUPS no local"
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Sí"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "No"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Compartició d'impressores locals"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Aquestes són les màquines i xarxes en què la impressora o impressores "
-"connectades localment han d'estar disponibles:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Afegeix ordinador/xarxa"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Edita l'ordinador/xarxa seleccionada"
-
-#
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Elimina l'ordinador/xarxa seleccionada"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "Adreça IP de l'ordinador/xarxa:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Trieu la xara o ordinadors en què les impressores locals han d'estar "
-"disponibles:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "L'adreça IP de l'ordinador/xarxa no hi és."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "La IP de l'ordinador/xarxa no és correcta.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Exemples d'IP correctes:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Aquest ordinador/xarxa ja és a la llista, no es pot tornar a afegir.\n"
-
-#
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Accés a les impressores en servidor CUPS remots"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Afegiu aquí els servidors CUPS les impressores dels quals voleu utilitzar. "
-"Només us cal fer això si els servidors no difonen la informació de les seves "
-"impressores en la xarxa local."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Afegeix un servidor"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Edita el servidor seleccionat"
-
-#
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Elimina el servidor seleccionat"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Introduïu l'adreça IP i port de l'ordinador les impressores del qual voleu "
-"utilitzar."
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Si no s'indica cap port, per defecte s'agafarà el 631."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "El servidor IP no hi és!"
-
-#
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "La IP introduïda no és correcta.\n"
-
-#
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "El número de port ha de ser enter!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Aquest servidor ja és a la llista, no es pot tornar a afegir.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Actiu, Nom o IP del servidor remot:"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "L'adreça IP o el nom del servidor CUPS no hi és."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "S'estan llegint dades de la impressora..."
-
-#
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "S'està reiniciant el CUPS"
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Seleccioneu la connexió de la impressora"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Com està connectada la impressora?"
-
-#
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"No cal configurar aquí les impressores de servidors CUPS remots; aquestes "
-"impressores es detectaran automàticament."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"ATENCIÓ: No hi ha cap connexió de xarxa local activa, no es poden ni "
-"detectar ni provar les impressores remotes!"
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-"Detecció automàtica de la impressora (local, TCP/Socket, impressores SMB i "
-"URI de dispositiu)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, fuzzy, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "El desplaçament ha de ser un enter positiu"
-
-#
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "S'està comprovant el vostre sistema..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "i una impressora desconeguda"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "i %d impressores desconegudes"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Les impressores\n"
-"\n"
-"%s%s\n"
-"estan connectades directament al vostre sistema"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"La impressora\n"
-"\n"
-"%s%s\n"
-"està connectada directament al vostre sistema"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"La impressora\n"
-"\n"
-"%s%s\n"
-"està connectada directament al vostre sistema"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha una impressora desconeguda connectada directament a l'ordinador."
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Hi ha %d impressores desconegudes connectades directament a l'ordinador."
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "No s'ha trobat cap impressora connectada directament a l'ordinador"
-
-#
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr ""
-" (Assegureu-vos que totes les impressores estan connectades i engegades.)\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Voleu habilitar la impressió a les impressores anteriors o a les impressores "
-"de la xarxa local?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Voleu habilitar la impressió a les impressores de la xarxa local?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Voleu habilitar la impressió a les impressores anteriors?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Esteu segur que voleu habilitar la impressió en aquesta màquina?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"NOTA: Segons el model de la impressora i el sistema d'impressió, "
-"s'instal·laran fins a %d MB de programari addicional."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "S'estan cercant noves impressores..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "S'ha trobat una impressora a %s..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " en"
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Selecció del model d'impressora"
-
-#
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Quin és el model de la vostra impressora?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"El Printerdrake no ha pogut determinar de quin model és la impressora %s. Si "
-"us plau, escolliu el model correcte de la llista."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Si la vostra impressora no és a la llista, escolliu-ne una de compatible "
-"(mireu el manual de la impressora) o una de similar."
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "S'està configurant la impressora a %s..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "S'està configurant la impressora \"%s\"..."
-
-#
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Afegiu una impressora"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us permetrà instal·lar impressores locals o remotes per usar-"
-"les en aquest ordinador i també des d'altres ordinadors de la xarxa.\n"
-"\n"
-"Us demanarà la informació necessària per definir impressores i us "
-"proporcionarà accés als controladors disponibles de les impressores, les "
-"seves opcions i els tipus de connexions d'impressores."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudarà a instal·lar la o les impressores connectades a "
-"l'ordinador, directament a la xarxa, o a una màquina Windows remota.\n"
-"\n"
-"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar automàticament. Engegueu també les "
-"impressores de xarxa i les màquines Windows.\n"
-"\n"
-"Tingueu en compte que la detecció automàtica d'impressores de la xarxa triga "
-"més que la detecció d'impressores connectades directament a la màquina. Per "
-"tant, desactiveu la detecció automàtica d'impressores en xarxa o en màquina "
-"Windows si no la necessiteu.\n"
-"\n"
-"Feu clic a \"Següent\" quan estigueu a punt, o a \"Cancel·la\" si no voleu "
-"configurar ara les impressores."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudarà a instal·lar la o les impressores connectades a "
-"aquest ordinador.\n"
-"\n"
-"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar automàticament.\n"
-"\n"
-"Feu clic a \"Següent\" quan estigueu a punt, o a \"Cancel·la\" si no voleu "
-"configurar ara les impressores."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudarà a instal·lar la o les impressores connectades a "
-"aquest ordinador o connectades directament a la xarxa.\n"
-"\n"
-"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar automàticament. Engegueu també les "
-"impressores de la xarxa.\n"
-"\n"
-"Tingueu en compte que la detecció automàtica d'impressores de la xarxa local "
-"triga més que la detecció d'impressores connectades directament a la "
-"màquina. Per tant, desactiveu la detecció automàtica d'impressores de xarxa "
-"si no la necessiteu.\n"
-"\n"
-"Feu clic a \"Següent\" quan estigueu a punt, o a \"Cancel·la\" si no voleu "
-"configurar ara les impressores."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Benvingut a l'auxiliar de configuració de la impressora\n"
-"\n"
-"Aquest auxiliar us ajudarà a instal·lar la o les impressores connectades a "
-"aquest ordinador.\n"
-"\n"
-"Si teniu impressores connectades a aquesta màquina, endolleu-les i engegueu-"
-"les per tal de poder-les detectar automàticament.\n"
-"\n"
-"Feu clic a \"Següent\" quan estigueu a punt, o a \"Cancel·la\" si no voleu "
-"configurar ara les impressores."
-
-#
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Detecta automàticament les impressores connectades a aquesta màquina"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Detecta automàticament les impressores connectades directament a la xarxa "
-"local"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Detecta automàticament les impressores connectades a màquines amb Microsoft "
-"Windows"
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "Detecció automàtica"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Felicitats, la impressora s'ha instal·lat i configurat correctament!\n"
-"\n"
-"Podeu imprimir utilitzant l'ordre \"Imprimeix\" de les aplicacions "
-"(normalment en el menú \"Fitxer\").\n"
-"\n"
-"Si voleu afegir, esborrar o canviar el nom a una impressora, o si voleu "
-"canviar les opcions per defecte (safata d'entrada, qualitat impressió...), "
-"seleccioneu \"Impressora\" en la secció \"Maquinari\" del Centre de Control %"
-"s."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "No s'han pogut instal·lar els paquets %s!"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr "S'està saltant la detecció automàtica de servidors Windows/SMB"
-
-#
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Detecció automàtica d'impressores"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "S'estan detectant els dispositius..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", impressora de xarxa \"%s\", port %s"
-
-#
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", impressora \"%s\" en servidor SMB/Windows \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "S'ha detectat %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Impressora en el port paral·lel #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Impressora de xarxa \"%s\", port %s"
-
-#
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Impressora \"%s\" en servidor SMB/Windows \"%s\""
-
-#
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Impressora local"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"No s'ha trobat cap impressora! Per instal·lar-ne una manualment entreu el "
-"dispositiu/fitxer a la línia d'entrada (Ports Paral·lel: /dev/lp0, /dev/lp1, "
-"etc., equivalents a LPT1:, LPT2:, etc.; 1a impressora USB: /dev/usb/lp0, 2a "
-"impressora USB: /dev/usb/lp1, etc.)."
-
-#
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Heu d'entrar un nom de dispositiu o de fitxer!"
-
-#
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "No s'ha trobat cap impressora!"
-
-#
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Impressores locals"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Impressores disponibles"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "La impressora següent s'ha detectat automàticament."
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Si no és el que voleu configurar, introduïu un nom de dispositiu/nom de "
-"fitxer en la línia d'entrada"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Alternativament, podeu indicar el nom de dispositiu/nom de fitxer en la "
-"línia d'entrada"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Aquesta és la llista d'impressores que es detecten automàticament."
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Si us plau, escolliu la impressora que voleu configurar o introduïu un nom "
-"de dispositiu/nom de fitxer en la línia d'entrada"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Si us plau, escolliu la impressora a què s'han d'enviar les tasques "
-"d'impressió o introduïu un nom de dispositiu/nom de fitxer en la línia "
-"d'entrada"
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"La configuració de la impressora es farà automàticament. Si la vostra "
-"impressora no ha estat correctament detectada, o si preferiu personalitzar-"
-"ne la configuració, habiliteu \"Configuració manual\"."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Actualment no ha hi disponible cap possibilitat alternativa"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Si us plau, escolliu la impressora que voleu configurar. La configuració de "
-"la impressora es farà automàticament. Si la vostra impressora no s'ha "
-"detectat correctament o si preferiu personalitzar-ne la configuració, "
-"activeu \"Configuració manual\"."
-
-#
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-"Si us plau, seleccioneu la impressora on han d'anar les tasques d'impressió."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Escolliu el port al qual està connectada la impressora o escriviu el nom de "
-"dispositiu/nom de fitxer en la línia d'entrada"
-
-#
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr ""
-"Si us plau, seleccioneu el port al qual teniu connectada la impressora."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Ports Paral·lel: /dev/lp0, /dev/lp1, etc., equivalents a LPT1:, LPT2:, "
-"etc.; 1a impressora USB: /dev/usb/lp0, 2a impressora USB: /dev/usb/lp1, "
-"etc.)."
-
-#
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Heu d'escollir/introduir una impressora/dispositiu!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "S'està avortant"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Opcions de la impressora lpd remota"
-
-#
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Per poder utilitzar una impressora lpd remota, cal que proporcioneu el nom "
-"de l'ordinador que té el servidor de la impressora i el nom de la impressora "
-"en aquell servidor."
-
-#
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Nom de l'ordinador remot"
-
-#
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Nom de la impressora remota"
-
-#
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Falta el nom de l'ordinador remot!"
-
-#
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Falta el nom de la impressora remota!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Informació"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Model detectat: %s %s"
-
-#
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "S'està escanejant la xarxa..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", impressora \"%s\", en el servidor \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Impressora \"%s\" en el servidor \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Opcions de la impressora SMB (Windows 9x/NT)"
-
-#
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Per poder imprimir a una impressora SMB, heu d'indicar el nom de\n"
-"l'ordinador SMB (tingueu en compte que pot ser diferent del seu nom\n"
-"TCP/IP) i possiblement l'adreça IP del servidor d'impressió, així com el nom "
-"de compartició de la impressora a què voleu accedir i el nom d'usuari,\n"
-"contrasenya i informació de grup si són necessaris."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Si la impressora desitjada ha estat detectada automàticament, només cal que "
-"la seleccioneu a la llista i que hi afegiu el nom d'usuari, la contrasenya i "
-"el grup de treball, si són necessaris."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "Ordinadordel servidor SMB"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP del servidor SMB"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Nom de compartició"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Grup de treball"
-
-#
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Detectada automàticament"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Cal que subministreu o bé el nom del servidor o bé la seva IP!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Falta el nom de compartició de Samba!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "AVÍS DE SEGURETAT!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Ara es configurarà la impressió cap a un usuari de Windows amb contrasenya. "
-"Degut a una fallada en l'arquitectura del programari del client Samba la "
-"contrasenya es mostra en text clar en la línia d'ordres que el client Samba "
-"utilitza per transmetre i imprimir un treball en el Servidor Windows. Per "
-"tant, és possible per qualsevol usuari d'aquell ordinador de veure la "
-"contrasenya en la pantalla simplement escrivint ordres tals com \"ps auxwww"
-"\".\n"
-"\n"
-"Us recomanem que utilitzeu alguna de les següents alternatives (en tots el "
-"casos heu d'estar segur que només els ordinadors de la vostra xarxa local "
-"tenen accés al vostre Servidor Windows, per exemple utilitzant un "
-"tallafoc):\n"
-"\n"
-"Utilitzeu un compte sense contrasenya en el Servidor Windows, tal com \"GUEST"
-"\" o un compte especial dedicat a la impressió. No tragueu la protecció de "
-"la contrasenya d'un compte personal o del compte de l'administrador.\n"
-"\n"
-"Configureu el vostre Servidor Windows fent que la impressora estigui "
-"disponible a través del protocol LPD. Aleshores, definiu en el Printerdrake "
-"la impressió en aquest ordinador amb el tipus de connexió \"%s\".\n"
-"\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Configureu el vostre servidor Windows per tal que la impressora estigui "
-"disponible sota el protocol IPP i configureu la impressió en aquest "
-"ordinador amb el tipus de connexió \"%s\" en el Printerdrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Connecteu la impressora a un servidor Linux i feu que els ordinadors Windows "
-"s'hi connectin com clients.\n"
-"\n"
-"Realment voleu continuar configurant aquesta impressora tal com s'està fent "
-"ara?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Opcions de la impressora NetWare"
-
-#
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Per poder imprimir a una impressora NetWare, heu de proporcionar el nom del\n"
-"servidor d'impressió NetWare (tingueu en compte que pot ser diferent del "
-"nom\n"
-"TCP/IP de l'ordinador), així com el nom de la cua d'impressió de\n"
-"la impressora a la qual voleu accedir i el nom d'usuari i contrasenya si "
-"són\n"
-"necessaris."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Servidor de la impressora"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Nom de la cua d'impressió"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "Falta el nom del Servidor NCP!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "Falta el nom de la cua NCP!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", ordinador \"%s\", port %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Ordinador \"%s\", port %s"
-
-#
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Opcions de la impressora per a TCP/Socket"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Trieu una de les impressores detectades de la llista, o introduïu el nom de "
-"l'ordinador o la IP i opcionalment el número de port (per defecte és el "
-"9100) en els quadres de text."
-
-#
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Per imprimir a una impressora TCP o Socket, heu d'indicar el nom de xarxa o "
-"la IP de la impressora i, opcionalment, el número de port. En els servidors "
-"HP JetDirect el número del port normalment és el 9100, en els altres pot "
-"variar. Mireu el manual del vostre maquinari."
-
-#
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Falta el nom o la IP de l'ordinador de la impressora!"
-
-#
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Nom o IP de l'ordinador de la impressora"
-
-#
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "S'està la llista de URI de dispositiu..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "Dispositiu URI d'impressora"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Podeu especificar directament l'URI per accedir a la impressora. L'URI ha de "
-"complir les especificacions CUPS o Foomatic. Cal remarcar que alguns gestors "
-"de cues no accepten tots els tipus d'URI."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Heu d'entrar un URI vàlid!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "Condueix cap a una ordre"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Aquí podeu indicar qualsevol línia d'ordres arbitrària a la qual s'ha de "
-"conduir la tasca en comptes d'enviar-se directament a la impressora."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Línia d'ordres"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "S'ha d'introduir una línia d'ordres!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, fuzzy, c-format
-msgid "HPLIP"
-msgstr "PL_IP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr ""
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"La vostra impressora és un dispositiu multifunció d'HP o de Sony (OfficeJet, "
-"PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 amb escàner, DeskJet 450, "
-"Sony IJP-V100), una HP PhotoSmart or una HP LaserJet 2200?"
-
-#
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "S'està instal·lant el paquet %s..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, fuzzy, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-"No s'ha pogut crear el directori de la configuració de l'usuari del gnome «%"
-"s»: %s\n"
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "S'està comprovant el dispositiu i configurant l'%s..."
-
-#: printer/printerdrake.pm:2277
-#, fuzzy, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "A quin sector ho voleu moure?"
-
-#
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "S'estan instal·lant els paquets SANE..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, fuzzy, c-format
-msgid "Using and Maintaining your %s"
-msgstr "S'està enviant i publicant l'article \"%s\""
-
-#
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "S'estan instal·lant els paquets mtools..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr ""
-"L'accés a la targeta de memòria per a fotografies a %s no serà possible"
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "S'està explorant el dispositiu HP multifunció"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-"Accés a la targeta de memòria per a fotografies en el vostre dispositiu "
-"multifunció HP"
-
-#: printer/printerdrake.pm:2509
-#, fuzzy, c-format
-msgid "Configuring device..."
-msgstr "S'està configurant..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "S'està posant a disposició del CUPS el port d'impressora..."
-
-#
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "S'està llegint la base de dades d'impressores..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Introduïu el nom de la impressora i comentaris"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"El nom de la impressora només pot constar de lletres, números i el caràcter "
-"de subratllat"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"La impressora \"%s\" ja existeix,\n"
-"realment voleu sobreescriure la seva configuració?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Cada impressora necessita un nom (per exemple \"impressora\"). Els camps de "
-"Descripció i Ubicació no són necessaris. Són comentaris per als usuaris."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Nom de la impressora"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Descripció"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Ubicació"
-
-#
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "S'està preparant la base de dades d'impressores..."
-
-#
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "El model de la vostra impressora"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake ha comparat el nom del model resultant de la detecció "
-"automàtica d'impressores amb els models llistats en la seva base de dades "
-"d'impressores per trobar el millor resultat. L'elecció pot ser dolenta, "
-"especialment si la vostra impressora no es troba a la base de dades. Per "
-"tant, mireu si l'elecció és correcta i feu clic a \"El model és correcte\" "
-"si ho és, o a \"Selecciona el model manualment\" per tal d'escollir "
-"manualment el model d'impressora en la pantalla següent.\n"
-"\n"
-"Per la vostra impressora el Printerdrake ha trobat:\n"
-"\n"
-"%s"
-
-#
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "El model és correcte"
-
-#
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Selecciona el model manualment"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Si us plau, comproveu si el Printerdrake ha detectat correctament el model "
-"de la impressora. Cerqueu el model correcte a la llista quan estigui "
-"ressaltat un model erroni o bé \"Impressora bàsica\"."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "Instal·la un fitxer PPD subministrat pel fabricant"
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-"Tota impressora PostScript es distribueix amb un fitxer PPD que descriu les "
-"opcions de la impressora i les seves característiques."
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"El fitxer normalment està al CD en el que venen els controladors de Windows "
-"i Mac."
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr "També es poden trobar fitxers PPD a les pàgines web dels fabricants."
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"Si teniu Windows instal·lat en el vostre ordinador, també podeu buscar el "
-"fitxer PPD a la vostra partició de Windows."
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"Aquí podeu escollir el fitxer PPD que s'instal·larà al vostre ordinador, "
-"serà usat per configurar la vostra impressora."
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "Instal·la el fitxer PPD des de"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "Disquet"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "Una altra ubicació"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "Seleccioneu el fitxer PPD"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "El fitxer PPD %s no existeix o no és pot llegir!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "El fitxer PPD %s no compleix les especificacions PPD!"
-
-#
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "S'està instal·lant el fitxer PPD..."
-
-#
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Configuració de la OKI winprinter"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Esteu configurant una winprinter làser OKI. Aquestes impressores\n"
-"usen un protocol de comunicació molt especial i només funcionen quan es "
-"connecten al primer port paral·lel. Si la impressora està connectada a un "
-"altre port o a un servidor d'impressió, connecteu-la al primer port "
-"paral·lel abans d'imprimir la pàgina de prova. Si no ho feu, la impressora "
-"no funcionarà. El controlador de la impressora ignorarà el tipus de connexió."
-
-#
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Configuració de Lexmark inkjet"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Els controladors per a inkjet proporcionats per Lexmark només funcionen amb "
-"impressores locals, i no amb impressores en ordinadors remots o servidors "
-"d'impressió. Si us plau, connecteu la vostra impressora a un port local o "
-"configureu-la en l'ordinador on està connectada."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Per poder imprimir amb la Lexmark inkjet i amb aquesta configuració, "
-"necessiteu els controladors de la impressora inkjet proporcionats per "
-"Lexmark (http://www.lexmark.com/). Dins de la web de Lexmark, feu clic al "
-"botó \"Controladors\" i trieu la secció d'impressores. Aleshores escolliu el "
-"vostre model i després \"Linux\" com a sistema operatiu. Els controladors "
-"vénen en paquets RPM o en seqüències per a l'intèrpret d'ordres amb una "
-"instal·lació gràfica interactiva. No necessiteu fer aquesta configuració amb "
-"la interfície gràfica. Cancel·leu directament després de l'acord de "
-"llicència. Llavors imprimiu pàgines d'alineació dels capçals d'impressió amb "
-"l'ordre \"lexmarkmaintain\" i ajusteu l'alineació dels capçals amb aquest "
-"programa."
-
-#
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Configuració de Lexmark X125"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"El controlador per aquesta impressora només suporten impressores connectaves "
-"localment via USB, i no amb impressores en ordinadors remots o servidors "
-"d'impressió. Si us plau, connecteu la vostra impressora a un port USB local "
-"o configureu-la en l'ordinador on està connectada."
-
-#
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Configuració de Samsung ML/QL-85G"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"El controlador per aquesta impressora només suporten impressores connectaves "
-"localment via USB, i no amb impressores en ordinadors remots o servidors "
-"d'impressió. Si us plau, connecteu la vostra impressora a un port USB local "
-"o configureu-la en l'ordinador on està connectada."
-
-#
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Configuració de Canon LBP-460/660"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Penjada de microprogramari per a l'HP LaserJet 1000"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Paràmetres predeterminats de la impressora\n"
-"\n"
-"Us hauríeu d'assegurar que la mida de pàgina, el tipus de tinta i el mode "
-"d'impressió (si estan disponibles) i també la configuració del maquinari de "
-"les impressores làser (memòria, unitat dúplex, safates extra) són correctes. "
-"Cal remarcar que amb una qualitat d'impressió o una resolució molt altes la "
-"impressió pot ser molt lenta."
-
-#
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Paràmetres per defecte de la impressora"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "L'opció %s ha de ser un número enter!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "L'opció %s ha de ser un número!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "L'opció %s està fora de rang!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Voleu definir la impressora (\"%s\")\n"
-"com a impressora predeterminada?"
-
-#
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Pàgines de prova"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Escolliu les pàgines de prova que voleu imprimir.\n"
-"Nota: la pàgina de prova de fotografia pot ser molt lenta d'imprimir i en "
-"impressores làser amb poca memòria podria no acabar d'imprimir-se. "
-"Normalment n'hi ha prou d'imprimir la pàgina de prova estàndard."
-
-#
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Cap pàgina de prova"
-
-#
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Imprimeix"
-
-#
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Pàgina de prova estàndard"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Pàgina de prova alternativa (Carta)"
-
-#
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Pàgina de prova alternativa (A4)"
-
-#
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Pàgina de prova de fotografia"
-
-#
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "No imprimeixis cap pàgina de prova"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "S'esta(n) imprimint la(es) pàgina(es) de prova..."
-
-#
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr "S'està saltant la pàgina de prova de fotografia."
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"La(es) pàgina(es) de prova s'ha(n) enviat a la impressora.\n"
-"Pot passar un cert temps abans no comenci la impressió.\n"
-"Estat de la impressió:\n"
-"%s\n"
-"\n"
-
-#
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"La(es) pàgina(es) de prova s'ha(n) enviat a la impressora.\n"
-"Pot passar un cert temps abans no comenci la impressió.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Ha funcionat correctament?"
-
-#
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Impressora en cru (raw)"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) podeu "
-"utilitzar la comanda \"%s <fitxer>\" o una eina d'impressió gràfica: \"xpp "
-"<fitxer>\" o \"kprinter <fitxer>\". Les eines gràfiques us permeten escollir "
-"la impressora i modificar-ne els paràmetres fàcilment.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Podeu utilitzar aquestes ordres en el camp \"Ordre d'impressió\" dels "
-"diàlegs d'impressió de moltes aplicacions, però ara no heu de subministrar "
-"el fitxer perquè el fitxer per imprimir ja el proporciona l'aplicació.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"L'ordre \"%s\" també us permet modificar els paràmetres per a un treball "
-"d'impressió concret. Simplement afegiu els paràmetres desitjats a la línia "
-"d'ordres, p.ex.: \"%s <fitxer>\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Per conèixer les opcions disponibles de la impressora actual, llegiu la "
-"llista de sota o feu clic al botó \"Imprimeix la llista d'opcions\".%s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Aquí teniu una llista de les opcions d'impressió disponibles per a la "
-"impressora actual:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) useu "
-"l'ordre \"%s <fitxer>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"També podeu utilitzar aquesta ordre en el camp \"Ordre d'impressió\" dels "
-"diàlegs d'impressió de moltes aplicacions. Però ara no heu de subministrar "
-"el fitxer perquè el fitxer per imprimir ja el proporciona l'aplicació.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Per veure una llista de les opcions disponibles per a la impressora actual "
-"feu clic sobre el botó \"Imprimeix la llista d'opcions\"."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Per imprimir un fitxer des de la línia d'ordres (finestra de terminal) "
-"utilitzeu l'ordre \"%s <fitxer>\" o \"%s <fitxer>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"També podeu emprar la interfície gràfica \"xpdq\" per configurar opcions i "
-"gestionar treballs d'impressió.\n"
-"Si esteu utilitzant KDE com a entorn gràfic teniu un \"botó d'emergència\", "
-"una icona a l'escriptori, etiquetada amb \"ATURA la impressora!\", que atura "
-"tots el treballs d'impressió immediatament en fer-hi clic. Això és útil, per "
-"exemple, quan se us enganxa el paper en la impressora.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Les ordres \"%s\" i \"%s\" també permeten modificar els paràmetres per a un "
-"treball d'impressió concret. Simplement afegiu els paràmetres que vulgueu a "
-"la línia d'ordres, p.ex. \"%s <fitxer>\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "S'està imprimint/escanejant/llegint targetes de fotos en \"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "S'està imprimint/escanejant en \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "S'està imprimint o llegint una targeta de fotos en \"%s\""
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "S'està imprimint en la impressora \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "S'està imprimint en la impressora \"%s\""
-
-#
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Imprimeix la llista d'opcions"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, fuzzy, c-format
-msgid " - Print head alignment\n"
-msgstr "L'alineació horitzontal"
-
-#
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "Configuració de color"
-
-#: printer/printerdrake.pm:3959
-#, fuzzy, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"El vostre dispositiu multifunció ha estat configurat automàticament per "
-"poder escanejar. Ara podeu escanejar amb \"scanimage\" (\"scanimage -d hp:%s"
-"\" per especificar l'escàner si n'hi ha més d'un) des de la línia d'ordres o "
-"amb les interfícies gràfiques \"xscanimage\" o \"xsane\". Si esteu "
-"utilitzant el GIMP, també podeu escanejar escollint el punt apropiat en el "
-"menú \"Fitxer\"/\"Adquireix\". Executeu \"man scanimage\" a la línia "
-"d'ordres per a més informació.\n"
-"\n"
-"No utilitzeu \"scannerdrake\" amb aquest dispositiu!"
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"La impressora ha estat configurada automàticament per permetre-us l'accés "
-"als dispositius de targetes de fotos del vostre PC. Ara podeu accedir a les "
-"targetes de fotos emprant l'eina gràfica \"MtoolsFM\" (menú \"Aplicacions\" -"
-"> \"Eines d'arxivament\" -> \"Gestor de fitxers MTools\") o les utilitats de "
-"la línia d'ordres \"mtools\" (introduïu \"man mtools\" a la línia d'ordres "
-"per a més informació). Trobareu el sistema de fitxers de la targeta sota la "
-"lletra d'unitat \"p:\", o a les lletres següents si teniu més d'una "
-"impressora HP amb unitats de targetes de fotos. Al \"MToolsFM\" podeu "
-"explorar les diferents lletres d'unitat amb el camp que es troba a la "
-"cantonada superior dreta de les llistes de fitxers."
-
-#
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Configuració de la transferència de la impressió"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Podeu copiar la configuració d'impressió que he fet per la cua %s a la %s, "
-"la cua d'impressió actual. Totes les dades de configuració (nom "
-"d'impressora, descripció, ubicació, tipus de connexió i paràmetres per "
-"defecte) se sobreescriuran, però els treballs d'impressió no seran "
-"transferits.\n"
-"No totes les cues d'impressió poden ser transferides degut a les raons "
-"següents:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS no permet l'ús d'impressores en servidors Novell ni que les impressores "
-"enviïn les dades dins d'una ordre formada arbitràriament.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ només funciona amb impressores locals, impressores LPD remotes, i "
-"impressores de Socket/TCP.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD i LPRng no funcionen amb impressores IPP.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"A més, les cues que no han estat creades amb aquest programa o amb "
-"\"foomatic-configure\" no es poden transferir."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Tampoc poden transferir-se les impressores configurades amb els fitxers PPD "
-"proporcionats pels seus fabricants o amb controladors nadius per a CUPS."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Marqueu les impressores que voleu transferir i feu clic a \n"
-"\"Transfereix\"."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "No transfereixis cap impressora"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Transfereix"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ja existeix una impressora amb nom \"%s\" en %s. \n"
-"Feu clic a \"Transfereix\" per sobreescriure-la.\n"
-"També podeu escriure un nom nou o ometre aquesta impressora."
-
-#
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Nou nom d'impressora"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "S'està transferint %s..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Heu transferit la vostra impressora predeterminada anterior (\"%s\"). Voleu "
-"que també sigui la impressora predeterminada en el nou sistema d'impressió %"
-"s?"
-
-#
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "S'estan refrescant les dades de les impressores..."
-
-#
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "S'està arrencant la xarxa..."
-
-#
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Configureu la xarxa ara"
-
-#
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "La funcionalitat de xarxa no ha estat configurada"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Esteu a punt de configurar una impressora remota. Això necessita una "
-"connexió de xarxa operativa, però la vostra xarxa encara no està "
-"configurada. Si continueu sense configurar la xarxa, no podreu utilitzar la "
-"impressora que esteu configurant ara. Què voleu fer?"
-
-#
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Continua sense configurar la xarxa"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"La configuració de xarxa feta durant la instal·lació no s'ha pogut iniciar "
-"ara. Comproveu si la xarxa es torna accessible després de reiniciar el "
-"sistema i corregiu la configuració utilitzant el Centre de Control %s, a la "
-"secció \"Xarxa & Internet\"/\"Connexió\", i després configureu la "
-"impressora, també usant el Centre de Control %s, secció \"Maquinari\"/"
-"\"Impressores\""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"L'accés a la xarxa no ha funcionat i no s'ha pogut iniciar. Comproveu la "
-"configuració i el maquinari. Després proveu de configurar la impressora "
-"remota una altra vegada."
-
-#
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "S'està reiniciant el sistema d'impressió..."
-
-#
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "alt"
-
-#
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "paranoic"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-"S'està instal·lant un sistema d'impressió amb el nivell de seguretat %s"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Ara s'instal·larà el sistema d'impressió %s en un sistema que s'executa en "
-"el nivell de seguretat %s.\n"
-"\n"
-"Aquest sistema d'impressió executa un dimoni (procés en segon pla) que "
-"espera els treballs d'impressió i els gestiona. Aquest dimoni és accessible "
-"per ordinadors remots connectats a la xarxa i, per tant, és un possible punt "
-"d'atac. Per tant, només s'arrenquen per defecte uns pocs dimonis triats en "
-"aquest nivell de seguretat.\n"
-"\n"
-"Realment voleu configurar la impressió en aquest ordinador?"
-
-#
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "S'està iniciant el sistema d'impressió en arrencar l'ordinador"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"El sistema d'impressió (%s) no s'arrencarà automàticament quan l'ordinador "
-"s'iniciï.\n"
-"\n"
-"És possible que l'arrencada automàtica fos inhabilitada en canviar a un "
-"nivell de seguretat més alt, perquè el sistema d'impressió és un punt d'atac "
-"potencial.\n"
-"\n"
-"Voleu tornar a habilitar l'arrencada automàtica del sistema d'impressió?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "S'està comprovant el programari instal·lat..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "S'està eliminant %s"
-
-#
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "No s'ha pogut eliminar el sistema d'impressió %s!"
-
-#
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "S'està instal·lant %s..."
-
-#
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "No s'ha pogut instal·lar el sistema d'impressió %s!"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "Nom o IP del servidor remot:"
-
-#
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Establint la impressora per defecte..."
-
-#
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Sistema d'impressió CUPS local o servidor CUPS remot?"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr "El sistema d'impressió CUPS es pot usar de dues formes: "
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr "Com voleu configurar CUPS al vostre ordinador?"
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr "Servidor remot, especifiqueu el nom o la IP aquí:"
-
-#
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr "Sistema d'impressió CUPS local"
-
-#
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Seleccioneu la cua d'impressió"
-
-#
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Quin sistema d'impressió (cua) voleu utilitzar?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "No s'ha pogut configurar la impressora \"%s\"!"
-
-#
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "S'està instal·lant el Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "No s'han pogut instal·lar els paquets %s, no es pot iniciar %s!"
-
-#
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Les impressores següents estan configurades. Feu doble clic en una "
-"impressora per modificar-ne els paràmetres, per fer-la la impressora per "
-"defecte o per veure la informació de la impressora."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Mostra totes les impressores CUPS remotes disponibles"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Refresca la llista d'impressores (per veure totes les impressores CUPS "
-"remotes disponibles)"
-
-#
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "Configuració de CUPS"
-
-#
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Modifica el sistema d'impressió"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Mode normal"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Mode expert"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Opcions de la impressora"
-
-#
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Modifica la configuració de la impressora"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Impressora %s%s\n"
-"Quines modificacions voleu fer en aquesta impressora?"
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "Aquesta impressora està deshabilitada"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Fes-ho!"
-
-#
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Tipus de connexió de la impressora"
-
-#
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Nom de la impressora, descripció, ubicació"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Fabricant de la impressora, model, controlador"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Fabricant de la impressora, model"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Fes que aquesta sigui la impressora predeterminada"
-
-#
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "Habilita la impressora"
-
-#
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "Deshabilita la impressora"
-
-#
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Imprimeix la(es) pàgina(es) de prova"
-
-#
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Aprengueu a utilitzar la impressora"
-
-#
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Suprimeix la impressora"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "S'està suprimint la impressora antiga \"%s\"..."
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "La impressora \"%s\" està habilitada."
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "La impressora \"%s\" està deshabilitada."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Voleu realment suprimir la impressora \"%s\"?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "S'està suprimint la impressora \"%s\"..."
-
-#
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Impressora predeterminada"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "La impressora \"%s\" és ara la impressora per defecte."
-
-#: raid.pm:42
-#, fuzzy, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "No es pot afegir una partició a un RAID _formatat_ md%d"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "No hi ha prou particions per al nivell RAID %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "No s'ha pogut crear el directori /usr/share/sane/firmware!"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "No s'ha pogut crear l'enllaç /usr/share/sane/%s!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-"No s'ha pogut copiar el fitxer de firmware %s a /usr/share/sane/firmware!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "No s'han pogut establir els permissos del fitxer de firmware %s!"
-
-#
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-"No s'ha pogut instal·lar els paquets necessaris per compartir els vostres "
-"escàner(s)."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-"Els vostre(s) escànner(s) no estaran disponibles per a usuaris no "
-"privilegiats."
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "Accepta/Rebutja els missatges d'error IPv4 falsos."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr " Accepta/Refusa l'eco icmp broadcast."
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr " Accepta/Rebutja l'eco icmp."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Permet/Impedeix l'entrada automàtica."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"Si s'estableix a \"ALL\" permet que /etc/issue i /etc/issue.net existeixin.\n"
-"\n"
-"Si s'estableix a \"NONE\" no espermet cap\n"
-"\n"
-"Altrament només es permet /etc/issue."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "Permet/Impedeix tornar a arrencar per l'usuari de la consola."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Permet/Impedeix l'entrada de root remota."
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Permet/Impedeix l'entrada directa de root."
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Permet/Impedeix la llista d'usuaris del sistema en els gestors de pantalla "
-"(kdm i gdm)."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"Permet/Impedeix connexions X:\n"
-"\n"
-"- ALL (es permeten totes les connexions),\n"
-"\n"
-"- LOCAL (només connexió des de la màquina local),\n"
-"\n"
-"- NONE (cap connexió)."
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"L'argument indica si els clients estan autoritzar a connectar\n"
-"al servidor X des de la xarxa en el port tcp 6000 o no."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"Autoritza:\n"
-"\n"
-"- tots els serveis controlats per tcp_wrappers (vegeu hosts.deny(5)) si "
-"s'estableix a \"ALL\",\n"
-"\n"
-"- només els fitxers locals si s'estabeix a \"LOCAL\"\n"
-"\n"
-"- cap si s'estableix a \"NONE\".\n"
-"\n"
-"Per autoritzar els serveis que us calguin, utilitzeu /etc/hosts.allow\n"
-"(vegeu hosts.allow(5))."
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"Si SERVER_LEVEL (o SECURE_LEVEL si no hi és) és més gran que 3\n"
-"a /etc/security/msec/security.conf, crea l'enllaç simbòlic /etc/security/"
-"msec/server\n"
-"per apuntar a /etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-" El /etc/security/msec/server és utilitzat per chkconfig --add per decidir\n"
-"afegir un servei si és present al fitxer durant la instal·lació dels paquets."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"Habilita/Inhabilita crontab i at per als usuaris.\n"
-"\n"
-"Posa els usuaris autoritzats a /etc/cron.allow i /etc/at.allow\n"
-"(vegeu man at(1) i crontab(1))."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"Habilita/Deshabilita la protecció contra falsejament de resolució de noms.  "
-"Si\n"
-"\"%s\" és cert, informa també al registre del sistema."
-
-#
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Alarmes de seguretat:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "Habilita/Inhabilita la protecció contra falsejament de la IP."
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "Habilita/Inhabilita el libsafe si és que es troba al sistema."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "Habilita/Inhabilita el registre de paquets IPv4 estranys."
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Habilita/Inhabilita la comprovació de seguretat msec horària."
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-" S'està habilitant su només per a membres del grup wheel o permet su des de "
-"qualsevol usuari."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "Utilitza una contrasenya per autenticar usuaris."
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Activa/Inhabilita la comprovació de promiscuïtat de les targetes Ethernet."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr " Activa/Inhabilita la comprovació diària de seguretat."
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr " Habilita/Deshabilita sulogin(8) en nivell monousuari."
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Afegiu el nom com a excepció al maneig, per part de l'msec, de l'antiguitat "
-"de contrasenyes."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-"Definiu l'antiguitat de la contrasenya a \"max\" dies i temps en canviar a "
-"\"inactive\"."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-"Defineix la llargària de l'historial de contrasenyes per prevenir la "
-"reutilització de contrasenyes."
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Defineix la llargada mínima de la contrasenya i el nombre mínim de xifres i "
-"de lletres en majúscules."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Defineix umask de root."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "si és \"sí\", comprova els ports oberts"
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"si és \"sí\", comprova :\n"
-"\n"
-" - les contrasenyes buiDES, \n"
-"\n"
-" - les que no hi són a /etc/shadow\n"
-"\n"
-" - usuaris amb l'identificador 0 que no sigui root."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr "si és \"sí\", comprova els permisos dels fitxers a casa dels usuaris"
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"si és \"sí\", comprova si els dispositius de xarxa són en mode promiscu."
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "si és \"sí\", executa les comprovacions diàries de seguretat."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "si és \"sí\", comprova les addicions/supressions dels fitxers sgid."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "si és \"sí\", comprova la contrasenya buida a /etc/shadow."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "si és \"sí\", comprova la suma de control dels fitxers suid/sgid."
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "si és \"sí\", comprova addicions/eliminacions dels fitxers arrel suid."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "si és \"sí\", informa dels fitxers sense propietari"
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "si és \"sí\", comprova els fitxers/directoris que tothom pot escriure."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "si és \"sí\", executa les comprovacions chkrootkit."
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"si es defineix, envia l'informe de correu a aquesta adreça electrònica; si "
-"no, envia'l al root."
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "si és \"sí\", l'informa comprova el resultat per correu."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "No enviïs correus si no hi ha res del que avisar"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-"si és \"sí\", executa determinades comprovacions de la base de dades rpm."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
-"si és \"sí\", informa del resultat de la comprovació al registre del sistema."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "si és \"sí\", informa dels resultats de la comprovació a tty."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Defineix la mida de l'historial d'ordres de l'intèrpret d'ordres. El valor -"
-"1 indica il·limitada."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-"Defineix el temps màxim d'espera per a l'intèrpret d'ordres. El valor zero "
-"indica 'sense temps màxim'."
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "La unitat del temps d'espera és el segon"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Defineix la umask de l'usuari."
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Accepta els missatges d'error IPv4 falsos."
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Accepta l'eco icmp broadcast"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "Accepta echo icmp"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* existeix"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Permet l'entrada de root remota"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "Entrada directa com a superusuari"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr "Llista els usuaris en el sistema en gestors de pantalla (kdm i gdm)"
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "Permet connexions X Windows"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "Autoritza connexions TCP a les X Window"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "Autoritza tots els serveis control·lats per tcp_wrappers"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Chkconfig obeeix les regles msec"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "Habilita \"crontab\" i \"at\" pels usuaris"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr ""
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "Habilita la protecció contra falsejament de la IP."
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "Habilita/Inhabilita el libsafe si és que es troba al sistema."
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "Habilita el registre de paquets IPv4 estranys"
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "Habilita la comprovació de seguretat msec horària"
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr "Habilita su només per a membres del grup wheel o per qualsevol usuari"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "Utilitza una contrasenya per autenticar usuaris."
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "Comprovació de promiscuïtat de les targetes Ethernet"
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "Comprovació de seguretat diària"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "Sulogin(8) en nivell monousuari"
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Sense envelliment de contrasenya per"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Longitud de la història de contrasenyes"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr ""
-"Longitud mínima de la contrasenya i el nombre de dígits i lletres en "
-"majúscules"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "Umask de root"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Mida de la història de l'intèrpret de comandes"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Temps màxim d'espera per a l'intèrpret d'ordres"
-
-#
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "Umask d'usuari"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Comprova els ports oberts"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr ""
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "Comprova els permisos dels fitxers al home dels usuaris"
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "Comprova si els dispositius de xarxa són en mode promiscu"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Executa les comprovacions diàries de seguretat"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "Comprova les addicions/supressions dels fitxers sgid."
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "Comprova la contrasenya buida a /etc/shadow"
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "Comprova la suma de control dels fitxers suid/sgid"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "Comprova addicions/eliminacions de fitxers suid root."
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "Informa dels fitxers sense propietari"
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Comprova els fitxers/directoris que tothom pot escriure"
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "Executa les comprovacions chkrootkit"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "No enviïs correus quan no faci falta"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"si es defineix, envia l'informe de correu a aquesta adreça electrònica; si "
-"no, envia'l al root"
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "Informa el resultat de la comprovació per correu"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "Executa determinades comprovacions de la base de dades rpm"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Informa del resultat de la comprovació al registre del sistema"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Informa dels resultats de la comprovació a tty"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Benvinguda als crackers"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Pobre"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Alt"
-
-#
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Més Alt"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoic"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Aquest nivell s'ha d'utilitzar amb cura. Fa el vostre sistema molt més "
-"fàcil\n"
-"d'utilitzar, però també molt sensible: no s'ha d'utilitzar en un ordinador\n"
-"connectat a d'altres o a Internet. No cal contrasenya per accedir-hi."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Ara, la contrasenya està habilitada, però l'ús com a ordinador de xarxa "
-"segueix sense ser recomanable."
-
-#
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Aquesta és la seguretat estàndard recomanada per a un ordinador que "
-"s'utilitzarà per connectar-se a Internet com a client. Ara hi ha "
-"comprovacions de seguretat."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Hi ha ja algunes restriccions, i a la nit es fan més comprovacions "
-"automàtiques."
-
-#
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Amb aquest nivell de seguretat, la utilització d'aquest sistema com a "
-"servidor esdevé possible.\n"
-"La seguretat és ara prou alta com per utilitzar el sistema com a servidor\n"
-"que accepti connexions de molts clients. Nota: si la vostra màquina és només "
-"un client d'Internet, seria millor escollir un nivell més baix."
-
-#
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Aquest és similar al nivell anterior, però el sistema està completament "
-"tancat i les característiques de seguretat estan al màxim."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opcions bàsiques del DrakSec"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Escolliu el nivell de seguretat desitjat"
-
-#
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Nivell de seguretat"
-
-#
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Empra libsafe per als servidors"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Una llibreria que defensa contra els atacs de 'buffer overflow' i de 'format "
-"string'."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Administrador de seguretat (login o email)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Executa el sistema de so ALSA (Advanced Linux Sound Architecture)"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, un programador d'ordres periòdiques."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"L'apmd s'utilitza per monitoritzar l'estat de la bateria i registrar-lo "
-"mitjançant el registre del sistema (syslog).\n"
-"També es pot utilitzar per apagar l'ordinador quan queda poca bateria."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Executa les ordres programades per l'ordre 'at' a l'hora que es va\n"
-"especificar en executar 'at', i executa les ordres automàtiques quan la\n"
-"mitjana de càrrega és prou baixa."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"El cron és un programa UNIX estàndard que executa programes determinats\n"
-"per l'usuari en hores programades. El vixie cron afegeix un cert nombre de\n"
-"característiques al cron bàsic, incloent seguretat millorada i opcions\n"
-"de configuració més potents."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"FAM és un dimoni de monitorització de fitxers. És usat per tenir informes "
-"quan els fitxers canvien\n"
-"És usat a GNOME i KDE"
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"El GPM afegeix suport de ratolí a aplicacions Linux basades en text, com ara "
-"el Midnight Commander. També permet operacions de tallar i enganxar amb el "
-"ratolí, i inclou suport de menús desplegables a la consola."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"El HardDrake fa una prova del maquinari, i opcionalment configura\n"
-"el maquinari nou/canviat."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"L'Apache és un servidor de World Wide Web. S'utilitza per servir fitxers\n"
-"HTML i CGI."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"El dimoni superservidor d'Internet (conegut normalment com 'inetd') inicia\n"
-"altres serveis d'Internet a mesura que es van necessitant. És el "
-"responsable\n"
-"d'iniciar molts serveis, incloent el telnet, l'ftp, l'rsh i l'rlogin. Si\n"
-"s'inhabilita l'inetd, s'inhabiliten tots els serveis de què és responsable."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Executa el filtratge de paquets per als nuclis Linux 2.2, per instal·lar\n"
-"un tallafoc que protegeixi el vostre ordinador d'atacs des de la xarxa."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Aquest paquet carrega el mapa de teclat seleccionat segons s'ha definit\n"
-"a /etc/sysconfig/keyboard. Es pot seleccionar mitjançant la utilitat\n"
-"kbdconfig.\n"
-"Per a la majoria d'ordinadors, s'ha de deixar habilitat."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Regeneració automàtica del capçal de nucli a /boot per\n"
-"/usr/include/linux/{autoconf,versió}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Detecció i configuració automàtica de maquinari en iniciar l'ordinador."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"De vegaDES, el Linuxconf determinarà que s'han de fer algunes tasques\n"
-"en iniciar l'ordinador per mantenir la configuració del sistema."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"L'lpd és el dimoni d'impressió necessari perquè l'lpr funcioni\n"
-"correctament. Bàsicament, es tracta d'un servidor que assigna les\n"
-"tasques d'impressió a la(es) impressora(es)."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"El Servidor Virtual de Linux (LVS) s'usa per construir un servidor de \n"
-"gran capacitat i robustesa."
-
-#
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) és un servidor de noms de domini (DNS) que s'utilitza per "
-"convertir noms d'ordinadors centrals en adreces IP."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Munta i desmunta tots els punts de muntatge dels sistemes de fitxers\n"
-"de xarxa (NFS), SMB (gestor de xarxes d'àrea local/Windows) i NCP (NetWare)."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activa/Desactiva totes les interfícies de xarxa configurades per\n"
-"iniciar-se durant l'arrencada."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"L'NFS és un protocol popular de compartició de fitxers en xarxes TCP/IP.\n"
-"Aquest servei proporciona la funcionalitat del servidor NFS, que es\n"
-"configura mitjançant el fitxer /etc/exports."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"L'NFS és un protocol popular de compartició de fitxers en xarxes TCP/IP\n"
-"Aquest servei proporciona la funcionalitat de blocatge de fitxer NFS."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Engega automàticament a l'arrencada la tecla de fixació del \n"
-"teclat numèric a la consola i sota Xorg."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Funciona amb OKI 4w i winprinters compatibles."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"El suport PCMCIA serveix normalment per funcionar amb coses com ara "
-"l'ethernet\n"
-"i els mòdems en portàtils. No s'iniciarà tret que es configuri, de manera\n"
-"que no hi ha problema per instal·lar-lo en ordinadors que no el necessiten."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"El mapador de ports (portmapper) gestiona les connexions RPC, que s'usen "
-"per\n"
-"protocols com ara l'NFS i el NIS. El servidor portmap s'ha d'estar\n"
-"executant en ordinadors que actuen com a servidors per a protocols que\n"
-"utilitzen el mecanisme RPC."
-
-#
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"El Postfix és un Agent de Transport de Correu, que és el programa que passa "
-"el correu d'un ordinador a un altre."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Desa i recupera el generador d'entropia del sistema per a\n"
-"la generació de nombres aleatoris d'una qualitat més alta."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Assigna els dispositius en cru a dispositius de blocs (com ara les "
-"particions de\n"
-"disc dur), perquè siguin utilitzats per aplicacions com ara Oracle o "
-"reproductors DVD"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"El dimoni 'routed' permet que la taula d'encaminadors IP automàtics\n"
-"s'actualitzi mitjançant el protocol RIP. Mentre que el RIP s'utilitza\n"
-"àmpliament en xarxes petites, les xarxes complexes necessiten protocols\n"
-"d'encaminament més complexos."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"El protocol rstat permet que els usuaris d'una xarxa recuperin\n"
-"mesures de rendiment de qualsevol ordinador de la mateixa."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"El protocol rusers permet que els usuaris d'una xarxa identifiquin\n"
-"qui està connectat en altres ordinadors de la mateixa."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"El protocol rwho permet que els usuaris remots obtinguin una llista\n"
-"de tots els usuaris que estan connectats a un ordinador que està\n"
-"executant el dimoni rwho (similar al finger)."
-
-#
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Executa el sistema de so en el vostre ordinador"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"El syslog és el sistema que utilitzen molts dimonis per registrar\n"
-"missatges en diversos fitxers de registre del sistema. És aconsellable\n"
-"executar-lo sempre."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Carrega els controladors per a dispositius USB."
-
-#
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "Inicia l'X Font Server (això és necessari perquè l'Xorg funcioni)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Escolliu els serveis que s'han d'iniciar automàticament durant l'arrencada"
-
-#
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Impressió"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Internet"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Compartició de fitxers"
-
-#
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Administració remota"
-
-#
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Servidor de base de dades"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "s'està executant"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "aturat"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Serveis i dimonis"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Malauradament no hi ha més informació\n"
-"sobre aquest servei."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Informació"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "Inicia quan el demanin"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "En arrencar"
-
-#
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Inicia"
-
-#
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Atura"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Què és Mandriva Linux?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Benvingut al <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, fuzzy, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"Mandriva Linux és ampliament coneguda com la distribució de Linux més "
-"amigable, fàcil d'instal·lar i usar."
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Open Source</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Benvingut al <b>món del Codi Font Obert</b>!"
-
-#: share/advertising/02.pl:17
-#, fuzzy, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"Mandriva Linux està compromès amb el model de codi font obert i respecta "
-"completament la General Public License. Aquesta nova versió és el resultat "
-"de l'esforç col·laboratiu dels desenvolupadors de Mandriva i els "
-"contribuïdors de Mandriva Linux al voltant del món."
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-"Voldríem <b>agrair</b> a tothom que hagi participat en el desenvolupament "
-"d'aquesta versió."
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>La GPL</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-"La major part dels programes inclosos en aquesta distribució i totes les "
-"eines de Mandriva Linux estan llicenciades sota la <b>General Public "
-"License</b>."
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-"La GPL és el cor del model de codi font obert, garanteix la <b>llibertat</b> "
-"d'usar, estudiar, distribuir i millorar els programes de qualsevol forma que "
-"es vulgui sempre que aquestes modificacions siguin alhora GPL."
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-"El benefici principal d'aquest fet es que el número de desenvolupadors és "
-"virtualment <b>il·limitat</b>, resultant en programes de <b>una qualitat "
-"molt alta</b>."
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>Uniu-vos a la comunitat</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr "<b>Versió de descàrrega</b>"
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-"\t* <b>Controladors propietaris</b> (com controladors per NVIDIA®, ATI™, "
-"etc.)."
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-"\t* <b>Programari propietari</b> (com Acrobat® Reader®, RealPlayer®, Flash™, "
-"etc.)."
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr "<b>Discovery, El vostre primer escriptori Linux</b>"
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr "Esteu instal·lant <b>Mandriva Linux Discovery</b>."
-
-#: share/advertising/06.pl:17
-#, fuzzy, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery és la distribució de Linux més amigable i fàcil d'usar. Inclou "
-"programari escollit a mà per tasques d'oficina, multimèdia i d'internet."
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr "Esteu instal·lant <b>Mandriva Linux PowerPack</b>."
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr "<b>PowerPack+, La solució Linux per escriptoris i servidors</b>"
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr "Esteu instal·lant <b>Mandriva Linux PowerPack+</b>."
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Productes de Mandriva</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-"<b>Mandriva</b> ha desenvolupat una àmplia gama de productes <b>Mandriva "
-"Linux</b>."
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Els productes Mandriva Linux són:"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr "\t* <b>Discovery</b>, El vostre primer escriptori Linux."
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr "\t* <b>PowerPack+</b>, La solució Linux per escriptoris i servidors."
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-"\t* <b>Mandriva Linux per x86-64</b>, La solució Mandriva Linux per obtenir "
-"el màxim del vostre processador de 64-bit."
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "<b>Productes de Mandriva (Solucions professionals)</b>"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>La tria de KDE</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Escolliu el vostre entorn d'escriptori favorit</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "<b>OpenOffice.org</b>"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, fuzzy, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"Més que només un complet client de correu, <b>Kontact</b> també inclou una "
-"llibreta d'adreces, un calendari i un planificador, a més d'una eina "
-"d'agafar notes!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Navega per Internet</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* Navegar per la <b>xarxa</b> amb Konqueror."
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "\t* <b>Transferir</b> fitxers amb KBear."
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* Editar i crear <b>imatges</b> amb El Gimp."
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr "<b>Disfruteu de la àmplia gama d'aplicacions</b>"
-
-#: share/advertising/18.pl:15
-#, fuzzy, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"Al menú de Mandriva Linux trobareu aplicacions fàcils d'usar per totes les "
-"tasques:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-"\t* Crear, editar i compartir documents d'oficina amb <b>OpenOffice.org</b>"
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr "\t* Navegar per la xarxa amb <b>Mozilla</b> i <b>Konqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* Participar en xats en línia amb <b>Kopete</b>"
-
-#: share/advertising/18.pl:20
-#, fuzzy, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr "\t* Escolteu CD d'àudio i fitxers de música amb KsCD i <b>Totem</b>"
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* Editar imatges i fotos amb <b>El Gimp</b>"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Entorns de desenvolupament</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-"PowerPack us proporciona les millors eines per <b>desenvolupar</b> les "
-"vostres aplicacions."
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>Editors de desenvolupament</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr "PowerPack us deixarà escollir entre aquests <b>editors populars</b>:"
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-"\t* <b>XEmacs</b>: un altre editor de text i sistema de desenvolupament "
-"d'aplicacions de codi font obert"
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-"\t* <b>Vim</b>: editor de text avançat amb més característiques que el vi "
-"estàndard"
-
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>Llenguatges de desenvolupament</b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr "\t* El famós <b>llenguatge C</b>."
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr "\t* Llenguatges orientats a objectes:"
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr ""
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl </b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr "\t* i molts altres."
-
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>Eines de desenvolupament</b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Servidor Groupware</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* Enviar i rebre <b>correus electrònics</b>."
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Servidors</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-"\t* <b>Samba</b>: Serveis de fitxers i impressió per a clients MS-Windows"
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: El servidor Web més usat"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-"\t* <b>MySQL</b> i <b>PostgreSQL</b>: Les bases de dades de Codi Font Obert "
-"més populars del món"
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: Concurrent Versions System, el sistema de control de "
-"versions dominant i transparent a la xarxa de codi font obert"
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-"\t* <b>ProFTPD</b>: el servidor FTP amb llicència GPL altament configurable"
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-"\t* <b>Postfix</b> i <b>Sendmail</b>: Els servidors de correu populars i "
-"potents."
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Centre de Control Mandriva Linux</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"El <b>Centre de Control Mandriva Linux</b> és una col·lecció essencial de "
-"utilitats específiques de Mandriva Linux per simplificar la configuració del "
-"vostre ordinador."
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>El model del codi font obert</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>Tenda en línia</b>"
-
-#: share/advertising/27.pl:15
-#, fuzzy, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"Conegui tots els productes i serveis de Mandriva a <b>Mandriva Store</b> -- "
-"la nostra plataforma de serveis de comerç electrònic."
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "Passeu-vos avui per <b>store.mandriva.com</b>"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-"<b>Mandriva Club</b> és el <b>company perfecte</b> pel vostre producte "
-"Mandriva Linux."
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, fuzzy, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr "\t* Descomptes especials en productes i serveis de Mandriva Store"
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-"\t* Accés a <b>aplicacions comercials</b> (per exemple controladors NVIDIA® "
-"o ATI™)."
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* Participació en els <b>fòrums d'usuaris</b> de Mandriva Linux"
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-"\t* <b>Notificació</b> d'actualitzacions (per correu electrònic o per un "
-"applet a l'escriptori)."
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Estació de treball d'oficina"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Programes d'ofimàtica: processadors de textos (OpenOffice.org Writer, "
-"Kword), fulls de càlcul (OpenOffice.org Calc, Kspread), visualitzadors pdf, "
-"etc."
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programes d'ofimàtica: processadors de textos (kword, abiword), fulls de "
-"càlcul (kspread, gnumeric), visualitzadors pdf, etc."
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Estació de jocs"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Programes d'entreteniment: acció, jocs de taula, estratègia, etc."
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Estació multimèdia"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Programes de reproducció/edició de so i vídeo"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Estació d'Internet"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Conjunt d'eines per llegir i enviar correu i notícies (mutt, tin...) i per "
-"navegar pel Web"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Ordinador de xarxa (client)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Clients per a diferents protocols, incloent l'ssh"
-
-#
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Configuració"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Eines per facilitar la configuració de l'ordinador"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Eines de consola"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editors, intèrprets d'ordres, eines de fitxer, terminals"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Biblioteques de desenvolupament C i C++, programes i fitxers include"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Documentació"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llibres i Com es fa... sobre el Linux i el programari lliure"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Base Estàndard de Linux (LSB). Suport a aplicacions de tercers"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "Groupware"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Servidor Kolab"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Tallafoc/Encaminador"
-
-#
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Passarel·la a Internet"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "Correu/Notícies"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Servidor de correu Postfix, Servidor de noticies Inn"
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "Servidor de directori"
-
-#
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "Servidor FTP"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Servidor de Noms de Domini i d'Informació de la Xarxa (DNS/NIS)"
-
-#: share/compssUsers.pl:112
-#, fuzzy, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Servidor de la impressora"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "Servidor NFS, Servidor Samba"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Base de dades"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "Servidor de bases de dades PostgreSQL i MySQL"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache i Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Correu"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Servidor de correu Postfix"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "Servidor de bases de dades PostgreSQL o MySQL"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Servidor d'ordinador de xarxa"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Servidor NFS, Servidor SMB, Servidor Proxy, Servidor SSH"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "Estació de treball KDE"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"L'entorn d'escriptori K (KDE), l'entorn gràfic bàsic que inclou diverses "
-"eines"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Estació de treball GNOME"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Entorn gràfic amb un conjunt d'aplicacions i eines d'escriptori fàcil "
-"d'utilitzar"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Altres escriptoris gràfics"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Utilitats"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "Servidor SSH"
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "Webmin"
-
-#
-#: share/compssUsers.pl:187
-#, fuzzy, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Configuració del Servidor de Terminal"
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Monitorització de la xarxa"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "Auxiliars de Mandriva"
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "Auxiliars per configurar el servidor"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"Aquest programa és programari lliure; el podeu redistribuir i/o modificar\n"
-"sota els termes de la Llicència General Pública de GNU tal com l'ha\n"
-"publicada la Free Software Foundation, ja sigui la versió 2 com (a elecció\n"
-"vostra) qualsevol versió posterior.\n"
-"\n"
-"Aquest programa és distribueix amb l'esperança que serà útil, però\n"
-"SENSE CAP GARANTIA; sense ni tant sols la garantia implícita de\n"
-"MERCANTIBILITAT o ADEQUACIÓ A UNA FINALITAT DETERMINADA.\n"
-"En trobareu més detalls a la Llicència General Pública de GNU.\n"
-"\n"
-"Heu d'haver rebut una còpia de la Llicència General Pública de GNU\n"
-"amb aquest programa; si no és així, escriviu a la Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, EUA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Aplicació per fer i recuperar còpies de seguretat\n"
-"\n"
-"--default             : desa els directoris per defecte.\n"
-"--debug               : mostra tots els missatges de depuració.\n"
-"--show-conf           : llista de fitxers o directoris dels quals\n"
-"                        s'ha de fer la còpia de seguretat.\n"
-"--config-info         : explica les opcions del fitxer de\n"
-"                        configuració (per a no-usuaris d'X).\n"
-"--daemon              : utilitza la configuració del dimoni. \n"
-"--help                : mostra aquest missatge.\n"
-"--version             : mostra el número de versió.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"OPCIONS:\n"
-"  --boot            - habilita la configuració del carregador d'arrencada\n"
-"  --splash          - habilita la configuració del tema d'arrencada\n"
-"mode per defecte: ofereix la configuració de l'entrada automàtica"
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[OPCIONS] [NOM_DEL_PROGRAMA]\n"
-"\n"
-"OPCIONS:\n"
-"  --help            - imprimeix aquest missatge d'ajuda.\n"
-"  --report          - el programa ha de ser una de les eines de Mandriva "
-"Linux\n"
-"  --incident        - el programa ha de ser una de les eines de Mandriva "
-"Linux"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"Aplicació d'importació de tipus de lletra i de monitorització\n"
-"\n"
-"OPCIONS:\n"
-"--windows_import : importa des de totes les particions de Windows "
-"disponibles.\n"
-"--xls_fonts      : mostra tots els tipus de lletra que ja són a l'xls\n"
-"--install        : accepta qualsevol fitxer de tipus de lletra i qualsevol "
-"directori.\n"
-"--uninstall      : desinstal·la qualsevol tipus de lletra o qualsevol "
-"directori de tipus de lletra.\n"
-"--replace        : reemplaça qualsevol tipus de lletra si ja existeix\n"
-"--application    : 0 cap aplicació.\n"
-"                 : 1 totes les aplicacions compatibles disponibles.\n"
-"                 : nom_de_l'aplicació, com ara so per a l'StarOffice \n"
-"                 : i gs per al ghostscript per utilitzar només aquesta."
-
-#: standalone.pm:84
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPCIONS]...\n"
-"Configurador del servidor de terminal de Mandriva Linux (MTS)\n"
-"--enable         : habilita l'MTS\n"
-"--disable        : inhabilita l'MTS\n"
-"--start          : inicia l'MTS\n"
-"--stop           : atura l'MTS\n"
-"--adduser        : afegeix a l'MTS un usuari existent al sistema (cal un nom "
-"d'usuari)\n"
-"--deluser        : suprimeix de l'MTS un usuari existent al sistema (cal un "
-"nom d'usuari)\n"
-"--addclient      : afegeix a l'MTS una màquina client (cal una adreça MAC, "
-"IP, nom d'imatge nbi)\n"
-"--delclient      : suprimeix de l'MTS una màquina client (cal una adreça "
-"MAC, IP, nom d'imatge nbi)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[teclat]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPCIONS]\n"
-"Aplicació de connexió a xarxes i Internet i de monitorització\n"
-"\n"
-"--defaultintf interface : per defecte, mostra aquesta interfície\n"
-"--connect : connecta a Internet si no ho està ja\n"
-"--disconnect : desconnecta d'Internet si està connectat\n"
-"--force : utilitzat amb (dis)connect : imposa la (des)connexió.\n"
-"--status : torna 1 si està connectat, 0 si no, i després surt.\n"
-"--quiet : no siguis interactiu. Per utilitzar amb (dis)connect."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPCIÓ]...\n"
-"  --no-confirmation      no facis la primera pregunta de confirmació en el "
-"mode Mandriva Update\n"
-"  --no-verify-rpm        no comprovis les signatures dels paquets\n"
-"  --changelog-first      mostra el registre de canvis abans de la llista de "
-"fitxers en la finestra de descripció\n"
-"  --merge-all-rpmnew     proposa fusionar tots els fitxers .rpmnew/.rpmsave "
-"trobats"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolució"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Sintaxi: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, fuzzy, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Heu de sortir i tornar a entrar per tal que els canvis tinguin efecte"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Si us plau, sortiu i utilitzeu Ctrl-Alt-tecla de retrocés"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr "Heu de sortir i tornar a entrar per tal que els canvis tinguin efecte"
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "Inútil sense el servidor de terminal"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s requereix un nom d'usuari...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s necessita: el nom de l'ordinador, adreça MAC, IP, image-nbi, 0/1 per "
-"a THIN_CLIENT, 0/1 per a la configuració local...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: %s necessita un nom d'ordinador...\n"
-
-#
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Configuració del Servidor de Terminal"
-
-#
-#
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Habilita el servidor"
-
-#
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Inhabilita el servidor"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Inicia el servidor"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Atura el servidor"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Disquet/ISO per a Etherboot"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Imatges d'arrencada de la xarxa"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Afegeix/Suprimeix usuaris"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Afegeix/Suprimeix clients"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Imatges"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "Auxiliar per a la primera vegada"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Cancel·la l'auxiliar"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr "Usa clients prims."
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"Si us plau escolliu el tipus de client per defecte.\n"
-"    Els clients prims ho executen tot a la CPU/RAM del servidor, usant la "
-"pantalla del client.\n"
-"    Els clients grassos usen la seva CPU/RAM però el sistema de fitxers del "
-"servidor."
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "S'estan creant les imatges d'arrencada per tots els nuclis"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Això trigarà uns minuts."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Fet!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-"S'està sincronitzant la llista d'usuaris del servidor amb la del client, "
-"incloent root."
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr "Visió general del Terminal Server"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - Crea imatges d'arrencada habilitades per a l'Etherboot:\n"
-"        \tPer arrencar un nucli mitjançant Etherboot cal crear una imatge "
-"kernel/initrd especial.\n"
-"        \tL'mkinitrd-net fa molta d'aquesta feina i el drakTermServ és només "
-"una interfície gràfica\n"
-"        \tper ajudar a gestionar/personalitzar aquestes imatges. Per crear "
-"el fitxer \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include, que s'integra com a "
-"inclusió en \n"
-"        \tdhcpd.conf, heu de crear les imatges Etherboot per a un nucli "
-"complet com a mínim."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"        - Manté /etc/dhcpd.conf:\n"
-"        \t\tPer arrencar clients desde la xarxa, cada client necessita una "
-"entrada dhcpd.conf, assignant a la màquina\n"
-"        \t\t una adreça IP i imatges d'arrencada de xarxa. El drakTermServ "
-"ajuda a crear/eliminar aquestes entrades.\n"
-"\t\t\t\n"
-"        \t\t(Les targetes PCI poden ometre la imatge; l'Etherboot en "
-"demanarà la correcta. Heu de\n"
-"        \t\tconsiderar també que, quan l'Etherboot cerca imatges, espera "
-"noms com ara\n"
-"        \t\tboot-3c59x.nbi, i no com boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tUna secció dhcpd.conf  típica que permeti l'ús d'un client sense "
-"disc té aquest aspecte:"
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"\t\t\tTot i que podeu utilitzar un conjunt d'adreces IP i no configurar una "
-"entrada específica per a una\n"
-"\t\t\tmàquina client, la utilització d'un esquema d'adreça fixa facilita la "
-"utilització de la funcionalitat\n"
-"\t\t\tdels fitxers de configuració específics del client que proporciona el "
-"ClusterNFS.\n"
-"\t\t\t\n"
-"\t\t\tNota: l'entrada \"#type\" només és utilitzada pel drakTermServ. Els "
-"clients poden ser 'prims'\n"
-"\t\t\t o bé 'grassos'. Els clients prims executen la majoria del programari "
-"en el servidor mitjançant\n"
-"\t\t\t l'xdmcp, mentre que els grassos executen la majoria del programari en "
-"la màquina client. S'ha\n"
-"\t\t\t escrit un inittab especial, %s per a clients prims. Els fitxers de\n"
-"\t\t\t configuració del sistema xdm-config, kdmrc i gdm.conf es modifiquen "
-"si s'utilitzen clients prims\n"
-"\t\t\t per habilitar l'xdmcp. Atès que la utilització de l'xdmcp té a veure "
-"amb temes de seguretat,\n"
-"\t\t\t hosts.deny i hosts.allow es modifiquen per limitar l'accés a la "
-"subxarxa local.\n"
-"\t\t\t\n"
-"\t\t\tNota: l'entrada \"#hdw_config\" també és utilitzada només pel "
-"drakTermServ. Els clients poden ser\n"
-"\t\t\t'certs' o 'falsos'. 'Cert' habilita l'entrada de root a la màquina "
-"client i permet una configuració local\n"
-"\t\t\tde maquinari de so, ratolí i X, utilitzant les eines ‘drak'. Això "
-"s'habilita creant fitxers de configuració\n"
-"\t\t\tseparats associats amb l'adreça IP del client i creant  punts de "
-"muntatge de lectura/escriptura per\n"
-"\t\t\tpermetre que el client modifiqui el fitxer. Quan estigueu satisfet amb "
-"la configuració, podeu eliminar\n"
-"\t\t\tels privilegis d'entrada de root del client.\n"
-"\t\t\t\n"
-"\t\t\tNota: heu d'aturar/iniciar el servidor després d'afegir o canviar "
-"clients."
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Manté /etc/exports:\n"
-"        \t\tEl Clusternfs permet l'exportació del sistema de fitxers root a "
-"clients sense disc. El drakTermServ\n"
-"        \t\tconfigura l'entrada correcta per permetre un accés anònim al "
-"sistema de fitxers root des de\n"
-"        \t\tclients sense disc.\n"
-"\n"
-"        \t\tUna entrada d'exportació típica per al clusternfs és:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tsent SUBNET/MASK definida per la vostra xarxa."
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - Manté %s:\n"
-"        \t\tPer tal que els usuaris puguin entrar al sistema des d'un client "
-"sense disc, cal que la seva entrada a\n"
-"        \t\t/etc/shadow estigui duplicada a %s. El drakTermServ hi ajuda "
-"afegint\n"
-"        \t\to eliminant, d'aquest fitxer, usuaris del sistema."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - Per client %s:\n"
-"        \t\tMitjançant clusternfs, cada client sense disc pot tenir els seus "
-"propis fitxers de configuració únics\n"
-"        \t\ten el sistema de fitxers root del servidor. Permetent una "
-"configuració de maquinari de client local, \n"
-"        \t\tel drakTermServ ajudarà a crear aquests fitxers."
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - Sistema de fitxers de configuració per client:\n"
-"        \tMitjançant clusternfs, cada client sense disc pot tenir els seus "
-"propis fitxers de configuració únics \n"
-"        \t en el sistema de fitxers root del servidor. Permetent una "
-"configuració de maquinari de client local, \n"
-"        \tels clients poden personalitzar fitxers com ara /etc/modules."
-"conf, /etc/sysconfig/mouse, \n"
-"        \t\t/etc/sysconfig/keyboard segons el client.\n"
-"\n"
-"        Nota: l'habilitació de la configuració del maquinari de client local "
-"habilita l'entrada de root al servidor \n"
-"        de terminal en cada màquina client que tingui habilitada aquesta "
-"funció. La configuració local es pot tornar\n"
-"        a desactivar, mantenint els fitxers de configuració, quan la màquina "
-"client estigui configurada."
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tEl drakTermServ configurarà aquest fitxer per funcionar "
-"conjuntament amb les imatges creades per\n"
-"        \t\tmkinitrd-net, i les entrades de /etc/dhcpd.conf, per servir la "
-"imatge d'arrencada a cada client sense \n"
-"        \t\tdisc.\n"
-"\n"
-"        \t\tUn fitxer de configuració TFTP típic té aquest aspecte:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \t\tLes diferències respecte a la instal·lació per defecte són el "
-"canvi del senyalador de\n"
-"        \t\tinhabilitació a 'no' i el canvi de camí de directori a /var/lib/"
-"tftpboot, on mkinitrd-net\n"
-"        \t\tposa les seves imatges."
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Disquet d'arrencada"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "ISO d'arrencada"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "Imatge PXE"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "Versió del nucli per defecte"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Munta tot el nucli -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "No heu seleccionat cap nucli!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Munta un NIC senzill -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "No s'ha seleccionat cap NIC!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Munta tots els nuclis -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Suprimeix"
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "No s'ha seleccionat cap imatge!"
-
-#
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Suprimeix tots els NBI"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Indica que la contrasenya de la base de dades del sistema és diferent a\n"
-" la de la base de dades del servidor de terminal.\n"
-"Suprimiu o torneu a afegir l'usuari al servidor de terminal per habilitar "
-"l'entrada."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Afegeix un usuari -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Suprimeix un usuari"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "tipus: %s "
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "configuració local:: %s"
-
-#
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Permet la configuració del\n"
-"maquinari local."
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "No s'ha creat cap imatge d'arrencada des de xarxa"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Client prim"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Permet clients prims"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Afegeix un client -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "tipus: gras"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "tipus: prim"
-
-#
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "configuració local: fals"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "configuració local: cert"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Edita un client"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Inhabilita la configuració local"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Suprimeix el client"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Configuració del dhcpd..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Cal reiniciar el Gestor de pantalla per tal que tots els canvis tinguin "
-"efecte. \n"
-"(\"service dm restart\" a la consola)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "Tots els clients usaran %s"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Subxarxa:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Màscara de xarxa:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Encaminadors:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Màscara de la subxarxa:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Adreça de difusió:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Nom de domini:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "Servidors de noms:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Inici de l'abast de la IP:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "Final de l'abast de la IP:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Escriu la configuració"
-
-#
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Configuració del servidor dhcpd"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"La majoria d'aquests valors s'han obtingut\n"
-"del vostre sistema actual.\n"
-"Podeu modificar-los si cal."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Si us plau, inseriu un disquet:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "No s'ha pogut accedir al disquet!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Ja podeu extreure el disquet"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "No s'ha trobat cap unitat de disquet!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "La imatge PXE és %s/%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "Error al escriure %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "La imatge ISO per a Etherboot és %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Alguna cosa ha anat malament! Teniu instal·lat l'mkisofs?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Abans cal crear /etc/dhcpd.conf!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s no és un usuari..\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s ja és un usuari del servidor del terminal\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "L'addicció del Terminal Server %s ha fallat!\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "%s afegit al servidor de terminal\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "S'ha eliminat %s...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "No s'ha trobat %s...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow i /etc/hosts.deny ja estan configurats - no canviats"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "La configuració ha canviat; voleu reiniciar el clúster nfs/dhcpd?"
-
-#
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "S'ha produït un error!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "No he trobat el fitxer d'imatge necessari `%s'."
-
-#
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Configuració de la instal·lació automàtica"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"Ara es configurarà un disquet d'instal·lació automàtica. Aquesta "
-"característica és perillosa i s'ha d'utilitzar amb molta cura.\n"
-"\n"
-"Amb aquesta característica, sereu capaç de repetir la instal·lació que ja "
-"heu fet en aquest ordinador, tot i que se us consultarà en alguns passos, "
-"perquè pugueu canviar els valors.\n"
-"\n"
-"Per màxima seguretat, el particionament i la formatació mai seran executats "
-"automàticament, independentment del que trieu durant la instal·lació "
-"d'aquest ordinador.\n"
-"\n"
-"Premeu Accepta per continuar."
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "repeteix"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "manual"
-
-#
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Configuració automatitzada dels passos"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Si us plau, escolliu per cada pas si es repetirà la vostra instal·lació o si "
-"serà manual"
-
-#
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "S'està creant el disquet d'instal·lació automàtica"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr ""
-"Inseriu un disquet en blanc a la unitat %s (pel disquet de controladors)"
-
-#
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr ""
-"S'està creant el disquet d'instal·lació automàtica (disquet de controladors)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Benvingut.\n"
-"\n"
-"Els paràmetres de la instal·lació automàtica estan disponibles en les "
-"seccions de l'esquerra"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Felicitats!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"El disquet s'ha creat correctament.\n"
-"Ara podeu repetir la vostra instal·lació."
-
-#
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Instal·la automàticament"
-
-#
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Afegeix un element"
-
-#
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Esborra l'últim element"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
-"Desa la contrasenya per aquest sistema a la configuració de drakbackup."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Les copies de seguretat diferencials només guarden els fitxers que han "
-"canviat o que són nous a partir de la còpia de seguretat original."
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Internal cron no està disponible per a usuaris que no siguin root"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-"\"%s\" no és ni una adreça de correu vàlida ni un usuari local existent!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"\"%s\" és un usuari local, però no heu escollit un SMTP local, per tant heu "
-"d'usar una adreça de correu electrònic completa!"
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "Llista d'usuaris antics:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "Llista d'usuaris nous:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      Informe del DrakBackup \n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      Informe del Dimoni DrakBackup\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    Detalls de l'Informe del DrakBackup\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Progrés total"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s existeix, voleu suprimir-lo?\n"
-"\n"
-"Si ja heu seguit aquest procés, probablement us calgui\n"
-"purgar l'entrada del paràmetre 'authorized_keys' en el servidor."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "La generació de les claus pot trigar una estona."
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "No s'ha pogut engendrar %s."
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "No es demana cap contrasenya a %s en el port %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Contrasenya incorrecta a %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "S'ha denegat el permís per transferir %s a %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "No s'ha trobat %s a %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s no respon"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"La transferència s'ha completat amb èxit\n"
-"Comproveu que podeu entrar al servidor amb:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"sense que se us demani una contrasenya."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "No s'ha trobat cap unitat de CDR/DVDR!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Sembla que el suport no és enregistrable!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Aquest suport no es pot esborrar!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Esborrar el suport pot trigar una estona."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Hi ha hagut un problema de permisos en accedir al CD."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "No s'ha trobat cap cinta a %s"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Fes una còpia de seguretat dels fitxers del sistema..."
-
-#
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Còpies de seguretat del disc dur..."
-
-#
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Fes una còpia de seguretat dels fitxers d'usuari..."
-
-#
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Fes una còpia de seguretat d'altres fitxers..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Progrés de la còpia de seguretat del disc dur..."
-
-#
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "No s'ha fet cap canvi a la còpia de seguretat"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Activitats del Drakbackup a través de %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Hi ha hagut un problema en la connexió FTP: No ha estat possible enviar els "
-"fitxers de la còpia de seguretat per FTP.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-"S'ha produït un error en enviar el fitxer a través d'FTP. Si us plau, "
-"corregiu la configuració de l'FTP."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "llista de fitxers enviada per FTP: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Activitats del Drakbackup a través del CD:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Activitats del Drakbackup a través de cinta:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-"S'ha produït un error en enviar el correu. El vostre informe no ha estat "
-"enviat."
-
-#
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " S'ha produït un error en enviar el correu electrònic. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "No s'ha pogut crear el catàleg!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Si us plau, marqueu totes les opcions que us calguin.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Aquestes opcions poden fer còpia de seguretat i restaurar tots els fitxers "
-"del directori /etc.\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Fes una còpia de seguretat dels fitxers del sistema (directori /etc)."
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-"Utilitza les còpies de seguretat incrementals/diferencials (no reemplacis "
-"les còpies antigues)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Utilitza les còpies de seguretat incrementals"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "Utilitza còpia de seguretat diferencials"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "No incloguis fitxers crítics (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Amb aquesta opció podreu restaurar qualsevol versió\n"
-" del directori /etc."
-
-#
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Si us plau, escolliu tots els usuaris que voleu incloure en la còpia de "
-"seguretat."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "No incloguis la memòria cau del navegador"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Seleccioneu els fitxers o directoris i feu clic a 'D'acord'"
-
-#
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Elimina la selecció"
-
-#
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Usuaris"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Empra la connexió de xarxa per fer la còpia de seguretat"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Mètode de xarxa:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "Usa Expect en l'SSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "Crea/Transfereix la còpia de seguretat de les claus per a SSH"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Transfereix-ho ara"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Ja hi ha les claus d'un altre programa (diferent del Drakbackup)"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Nom de l'ordinador o IP"
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-"Directori (o mòdul) d'aquest ordinador on voleu desar la còpia de seguretat."
-
-#
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Recorda aquesta contrasenya"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Cal introduir el nom de l'ordinador, el nom d'usuari i la contrasenya!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Utilitzar CD/DVDROM per fer la còpia de seguretat"
-
-#
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Escolliu el vostre dispositiu CD/DVD"
-
-#
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Escolliu la mida del CD/DVD"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "CD de multisessió"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "Suports CD-RW"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Esborra el suport RW (1a sessió)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " Esborra'l ara"
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "disc DVD+RW"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "disc DVD-R"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "Dispositiu DVDRAM"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "No s'ha definit cap dispositiu de CD!"
-
-#
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Utilitza una cinta per fer la còpia de seguretat"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Nom del dispositiu a utilitzar per fer la còpia"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "No rebobinis la cinta després de la còpia de seguretat"
-
-#
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Esborra la cinta abans de fer la còpia de seguretat"
-
-#
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Expulsa la cinta després de fer la còpia de seguretat"
-
-#
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Introduïu el directori on desar::"
-
-#
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr "Directori al qual desar"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CDROM / DVDROM"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Disc Dur / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "cada hora"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "diària"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "setmanal"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "mensual"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "a mida"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Gener"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Febrer"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Març"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "Abril"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Maig"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Juny"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Juliol"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Agost"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Setembre"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Octubre"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Novembre"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Desembre"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Diumenge"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Dilluns"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Dimarts"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Dimecres"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Dijous"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Divendres"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Dissabte"
-
-#
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Utilitza dimoni"
-
-#
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Si us plau, escolliu l'interval de temps entre cada còpia de seguretat"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Minut"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Hora"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Dia"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Mes"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Dia de la setmana"
-
-#
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Si us plau, trieu el suport per a la còpia."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Si us plau assegureu-vos que el dimoni cron està inclòs en els serveis."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-"Noteu que ara mateix tots els suports de xarxa també fan servir el disc dur."
-
-#
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr "Si us plau, seleccioneu el tipus de compresió"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Usa fitxers .backupignore"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Envia un informe per correu electrònic després de cada còpia a:"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "Servidor SMTP pel correu:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-"Suprimeix els arxius tar del disc dur després de fer una còpia de seguretat "
-"en un altre suport."
-
-#
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Què"
-
-#
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "On"
-
-#
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Quan"
-
-#
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Més opcions"
-
-#
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "El destí de la còpia de seguretat no ha estat configurat..."
-
-#
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Configuració del Drakbackup"
-
-#
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Si us plau, escolliu on voleu fer la còpia de seguretat"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr ""
-
-#
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "a la xarxa"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "en CDROM"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "en un dispositiu de cinta"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Còpia de seguretat dels usuaris"
-
-#
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (El valor per defecte és tots els usuaris)"
-
-#
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Si us plau, escolliu de què voleu fer la còpia de seguretat"
-
-#
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Còpia de seguretat del sistema"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Seleccioneu els usuaris manualment"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Seleccioneu les dades de les quals voleu fer la còpia..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Fonts de la còpia: \n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Fitxers de sistema:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Fitxers d'usuari:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Altres fitxers:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Desa-ho en el disc dur en el camí: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tLimita l'ús de disc a %s MB\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Suprimeix el arxius tar del disc dur en acabar.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- Crema a un CD"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " en el dispositiu: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (multisessió)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Desa-ho a una cinta en el dispositiu: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tEsborra=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- Desa-ho a través de %s en l'ordinador %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t nom d'usuari: %s\n"
-"\t\t en el camí: %s \n"
-
-#
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Opcions:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNo incloguis els fitxers de sistema\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tLes còpies de seguretat utilitzen tar i bzip2\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tLes còpies de seguretat utilitzen tar i gzip\n"
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tLes còpies de seguretat utilitzen només tar\n"
-
-#
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\tUsa els fitxers .backupignore\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tEnvia correu a %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tS'està usant el servidor SMTP %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Dimoni, %s via:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disc dur.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Cinta \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Xarxa per FTP.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Xarxa per SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Xarxa per rsync.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Cap configuració, si us plau feu clic a 'Auxiliar' o a 'Avançat'.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Llista de dades per restaurar:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- Restaura fitxers de sistema.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - de la data: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- Restaura fitxers d'usuari: \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- Restaura d'altres fitxers: \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Llista de dades corrompudes:\n"
-"\n"
-
-#
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Si us plau, desseleccioneu-ho o esborreu-ho la pròxima vegada."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Els fitxers de la còpia de seguretat estan corromputs"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          Totes les dades seleccionades han estat          "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          restaurades amb èxit en %s       "
-
-#
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "         Configuració de restauració       "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "'D'acord' per restaurar els altres fitxers."
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Llista d'usuaris per restaurar (només és important la data més recent per "
-"usuari)"
-
-#
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "Si us plau, seleccioneu la data a restaurar:"
-
-#
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Restaura des del disc dur."
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Entreu el directori on es guarden les còpies de seguretat"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr "Directori amb còpies de seguretat"
-
-#
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Seleccioneu un altre suport des del qual restaurar"
-
-#
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Altres suports"
-
-#
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Restaura el sistema"
-
-#
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Restaura els usuaris"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Restaura altres"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "seleccioneu el camí al qual restaurar (en comptes de /)"
-
-#
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "Ruta a la qual restaurar"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Fes una nova còpia de seguretat abans de restaurar (només per les còpies "
-"incrementals.)"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "Esborra els directoris d'usuari abans de restaurar."
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr ""
-
-#
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "No s'ha trobat cap coincidència..."
-
-#
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Restaura els seleccionats"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"Restaura l'entrada\n"
-"del catàleg seleccionada"
-
-#
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Restaura els fitxers\n"
-"seleccionats"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "No s'han trobat els fitxers de còpia de seguretat a %s"
-
-#
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Restaura des de CD"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Inseriu el CD amb l'etiqueta de volum %s\n"
-" a la unitat de CD sota el punt de muntatge /mnt/cdrom"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "L'etiqueta del CD no és correcta. L'etiqueta d'aquest disc és %s."
-
-#
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Restaura des de cinta"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Inseriu la cinta amb l'etiqueta de volum %s\n"
-" al dispositiu de cinta %s"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-"L'etiqueta de la cinta no és correcta. L'etiqueta d'aquesta cinta és %s."
-
-#
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Restaura a través de la xarxa"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Restaura mitjançant el protocol de xarxa: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Nom de l'ordinador"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Camí de l'ordinador central o mòdul"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "La contrasenya és necessària"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "El nom d'usuari és necessari"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "El nom de l'ordinador és necessari"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "El camí o el mòdul són necessaris"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "S'han restaurat els fitxers..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "La restauració ha fallat..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr ""
-
-#
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Busca fitxers a restaurar"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Restaura totes les còpies de seguretat"
-
-#
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Restauració personalitzada"
-
-#
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Restaura des de catàleg"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "No s'han pogut trobar les dades per restaurar...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Comproveu que %s és la ruta correcte"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " i el CD és a la unitat"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "El CD és a lloc - continua."
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "Navega per trobar un nou dipòsit de restauració"
-
-#
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr "Directori del qual restaurar"
-
-#
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Progrés de la restauració"
-
-#
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Construeix la còpia de seguretat"
-
-#
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Restaura"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Cal instal·lar els paquets següents:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Si us plau, seleccioneu les dades per restaurar..."
-
-#
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Còpia de seguretat dels fitxers de sistema"
-
-#
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Còpia de seguretat dels fitxers d'usuari"
-
-#
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Còpia de seguretat d'altres fitxers"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Progrés total"
-
-#
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "S'estan enviant els fitxers per FTP"
-
-#
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "S'estan enviant els fitxers..."
-
-#
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Fes la còpia de seguretat des del fitxer de configuració"
-
-#
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Visualitza la configuració de la còpia de seguretat"
-
-#
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Auxiliar de configuració"
-
-#
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Configuració avançada"
-
-#
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Consulta la configuració"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr ""
-
-#
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Fes la còpia de seguretat"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"No s'ha trobat el fitxer de configuració \n"
-"si us plau, feu clic a 'Auxiliar' o a 'Avançat'."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Fitxer"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Fitxer/_Surt"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"El carregador d'arrencada del vostre sistema no està en mode framebuffer. "
-"Per activar l'arrencada gràfica, escolliu un mode de vídeo gràfic a l'eina "
-"de configuració del carregador d'arrencada."
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "Voleu configurar-ho ara?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Instal·la els temes"
-
-#
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Selecció del tema gràfic d'arrencada"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Tema"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Mostra el tema\n"
-"sota la consola"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Crea un nou tema"
-
-#
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Usuari predeterminat"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Escriptori predeterminat"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "No, no vull l'entrada automàtica"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Sí, vull l'entrada automàtica amb aquest (usuari, escriptori)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Mode de sistema"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Executa la interfície gràfica en iniciar el sistema"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr ""
-"Eina per a la comunicació d'errors de programació (bugs) de Mandriva Linux"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Centre de Control Mandriva Linux"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Eina de sincronització"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Eines autònomes"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Control Remot"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Gestor de programari"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Eina de migració des de Windows"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Auxiliars de configuració"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr ""
-
-#: standalone/drakbug:82
-#, fuzzy, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"Nom de l'aplicació\n"
-"o ruta completa:"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Cerca el paquet"
-
-#
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Paquet: "
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Nucli:"
-
-#: standalone/drakbug:100
-#, fuzzy, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"Per trametre un informe d'error de programació, feu clic al botó 'Informa'.\n"
-"S'obrirà una finestra del navegador web amb la pàgina %s\n"
-"on trobareu un formulari per omplir. La informació que es mostra més amunt "
-"s'enviarà al servidor."
-
-#
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Informa"
-
-#
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "No instal·lat"
-
-#
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "El paquet no està instal·lat"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "no definit"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Canvia el fus horari"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Fus horari - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Està el rellotge del vostre ordinador establert en GTM?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "Network Time Protocol"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"El teu ordinador por sincronitzar el seu rellotge\n"
-" amb un servidor de temps remot usant NTP"
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Habilita el Network Time Protocol"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Servidor:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr "No s'ha pogut sincronitzar amb %s."
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Reinicialitza"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Es necessari instal·lar el paquet ntp\n"
-" per habilitar el Network Time Protocol\n"
-"\n"
-"Vols instal·lar ntp?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Configuració de xarxa (%d adaptadors)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Passarel·la:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Intefície:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Espereu si us plau"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Interfície"
-
-#
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Estat"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Nom de l'ordinador: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Configura el nom de l'ordinador..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "Configuració de la LAN"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Configura la xarxa d'àrea local..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Aplica"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Gestiona connexions"
-
-#
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr ""
-
-#
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "Configuració IP"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "Servidors DNS"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Domini de cerca"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "estàtica"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Control de fluxe"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Terminació de línia"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Temps màxim d'espera per al mòdem"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Usa fitxer de bloqueig"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Espera el to abans de marcar"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "Espera activa"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "So del mòdem"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Habilita"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Inhabilita"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Tipus de mitjà"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Nom del mòdul"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "Adreça Mac"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Bus"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Ubicació en el bus"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"No s'ha detectat cap adaptador de xarxa ethernet al sistema. Si us plau, "
-"executeu l'eina de configuració de maquinari."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Esborra una interfície de xarxa"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Escolliu la interfície de xarxa a esborrar:"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"S'ha produït un problema en esborrar la interfície de xarxa \"%s\":\n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "Felicitats, la interfície de xarxa \"%s\" s'ha esborrat amb èxit"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "Sense IP"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Sense màscara"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "amunt"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "avall"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Connectat"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Sense connexió"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Desconnecta..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Connecta..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Avís: s'ha detectat una altra connexió a Internet, podria estar utilitzant "
-"la vostra xarxa"
-
-#
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "Desactiva'l ara"
-
-#
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "Activa'l ara"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"No teniu cap interfície configurada.\n"
-"Configureu-la primer fent clic a 'Configura'"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "Configuració de la LAN"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptador %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Protocol d'arrencada"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Iniciat en l'arrencada"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Aquesta interfície encara no s'ha configurat.\n"
-"Executeu l'auxiliar \"Afegeix una interfície\" del Centre de Control de "
-"Mandriva Linux"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Aquesta interfície encara no s'ha configurat.\n"
-"Executeu l'auxiliar \"%s\" del Centre de Control de Mandriva Linux"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Estableix una nova interfície de xarxa  (LAN, XDSI, ADSL, ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Configuració de la connexió a Internet"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "Tercer servidor DNS (opcional)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Configuració de la connexió a Internet"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Accés a Internet"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Tipus de connexió: "
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Estat:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr "GDM (GNOME Display Manager)"
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr "KDM (KDE Display Manager)"
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr "MdkKDM (Mandriva Linux Display Manager)"
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr "XDM (X Display Manager)"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Elecció d'un gestor de pantalla"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"El gestor de pantalla X11 us permet entrar al sistema de manera\n"
-"gràfica amb el sistema X Window executant-se, i permet l'execució\n"
-"simultània de diverses sessions X a la màquina local."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "S'ha fet el canvi, voleu reiniciar el servei dm?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "Creació del disc d'arrencada"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "General"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Dispositiu"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Versió del nucli"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Preferències"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Opcions avançades"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Mida"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Arguments opcionals de l'mkinitrd"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "imposa"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "omet els mòduls RAID"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "si cal"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "omet els mòduls SCSI"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Afegeix un mòdul"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Elimina un mòdul"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Assegureu-vos que hi ha un suport al dispositiu %s"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"No hi ha cap suport al dispositiu %s o està protegit contra escriptura.\n"
-"Si us plau, inseriu-ne un."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "No es pot bifurcar: %s"
-
-#
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Creació del disquet completa"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "La creació del disc d'arrencada s'ha completat amb èxit \n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"No es pot tancar l'mkbootdisk correctament: \n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Cerca les fonts instal·lades"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Desselecciona les fonts instal·lades"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "analitza totes les fonts"
-
-#
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "No s'han trobat fonts"
-
-#
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "fet"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "No s'ha pogut trobar cap font en les particions muntades"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Torna a seleccionar les fonts correctes"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "No s'ha trobat cap font.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Cerca les fonts en la llista de les instal·lades"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "conversió de tipus de lletra %s"
-
-#
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Còpia de fonts"
-
-#
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Instal·lació de les fonts True Type"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "espereu si us plau durant ttmkfdir..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "Instal·lació de True Type feta"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "construcció de type1inst"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "referenciat Ghostscript"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Suprimeix els fitxers temporals"
-
-#
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Reinicia l'XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Suprimeix els fitxers de fonts"
-
-#
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "reinicialització de l'xfs"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Abans d'instal·lar cap font, assegureu-vos que teniu el dret a usar-les i "
-"instal·lar-les en el vostre sistema.\n"
-"\n"
-"Podeu instal·lar les fonts de la manera habitual. En casos estranys, fonts "
-"amb errors poden penjar el vostre servidor X."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Llista de fonts"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Quant a"
-
-#
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Desinstal·la"
-
-#
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Importa"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"Copyright (C) 2001-2002 per Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (versió original)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Aquest programa és programari lliure; el podeu redistribuir i/o modificar\n"
-"sota els termes de la Llicència General Pública de GNU tal com l'ha\n"
-"publicada la Free Software Foundation, ja sigui la versió 2 o (a elecció\n"
-"vostra) qualsevol versió posterior.\n"
-"\n"
-"\n"
-"Aquest programa és distribueix amb l'esperança que serà útil, però\n"
-"SENSE CAP GARANTIA; sense ni tant sols la garantia implícita de\n"
-"MERCANTIBILITAT o ADEQUACIÓ A UNA FINALITAT DETERMINADA.\n"
-"En trobareu més detalls a la Llicència General Pública de GNU.\n"
-"\n"
-"\n"
-"Heu d'haver rebut una còpia de la Llicència General Pública de GNU\n"
-"amb aquest programa; si no és així, escriviu a la Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, EUA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"Agraïments:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t per Ken Borgendale:\n"
-"\t    Converteix un fitxer .pfm de Windows a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t per James Macnicol: \n"
-"\t    type1inst genera fitxers fonts.dir fonts.scale i Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  per Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Converteix fonts ttf a fonts afm i pfb\n"
-
-#
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Escolliu les aplicacions que suportaran les fonts:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Abans d'instal·lar cap font, assegureu-vos que teniu el dret a usar-les i "
-"instal·lar-les en el vostre sistema.\n"
-"\n"
-"Podeu instal·lar les fonts de la manera habitual. En casos estranys, fonts "
-"amb errors poden penjar el vostre servidor X."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Impressores genèriques"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Seleccioneu el fitxer o directori de fonts i feu clic a 'Afegeix'"
-
-#
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Selecció de fitxers"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Importa fonts"
-
-#
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Instal·la fonts"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "feu clic aquí si ho teniu clar."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "aquí si no."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Desselecciona-ho tot"
-
-#
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Selecciona-ho tot"
-
-#
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Esborra la llista"
-
-#
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "S'estan important les fonts"
-
-#
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Comprovacions inicials"
-
-#
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Copiar les fonts en el vostre sistema"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instal·la i converteix les Fonts"
-
-#
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Post-instal·lació"
-
-#
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Esborra fonts del sistema"
-
-#
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Post-desinstal·lació"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Connexió a Internet compartida"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Només s'accepten nuclis de la sèrie 2.4 o superior."
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "La connexió a Internet compartida està inhabilitada"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara està inhabilitada.\n"
-"\n"
-"Què voleu fer?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "habilita"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "torna a configurar"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "deixa-ho córrer"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "S'estan habilitant els servidors..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Ara, la connexió compartida a Internet està habilitada."
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "La connexió a Internet compartida està habilitada"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de la connexió compartida a Internet ja s'ha dut a terme.\n"
-"Ara està habilitada.\n"
-"\n"
-"Què voleu fer?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "inhabilita"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "S'estan inhabilitant els servidors..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Ara, la compartició de la connexió a Internet està inhabilitada."
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ara es configurarà l'ordinador per tal que comparteixi la connexió a "
-"Internet.\n"
-"Amb aquesta característica, altres ordinadors de la vostra xarxa local\n"
-"podran utilitzar la connexió a Internet d'aquest ordinador.\n"
-"\n"
-"Assegureu-vos d'haver configurat l'accés a Internet i a la xarxa local amb "
-"el drakconnect abans de continuar.\n"
-"Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interfície %s (utilitzant el mòdul %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Interfície %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "No teniu cap adaptador de xarxa al sistema!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Interfície de la xarxa"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Només teniu un adaptador de xarxa configurat al sistema:\n"
-"\n"
-"%s\n"
-"\n"
-"Ara es configurarà la vostra xarxa d'àrea local amb aquest adaptador."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Escolliu la interfície de xarxa"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Si us plau, escolliu l'adaptador de xarxa que es connectarà a la vostra "
-"xarxa d'àrea local."
-
-#
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "La intefície de xarxa ja està configurada"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Avís: l'adaptador de xarxa (%s) ja està configurat.\n"
-"\n"
-"Voleu fer una reconfiguració automàtica?\n"
-"\n"
-"Ho podeu fer manualment però heu de saber què feu."
-
-#
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Reconfiguració automàtica"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "No (només experts)"
-
-#
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Mostra la configuració actual de la interfície"
-
-#
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Configuració actual de la interfície"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Configuració actual de '%s':\n"
-"\n"
-"Xarxa: %s\n"
-"Adreça IP: %s\n"
-"Atribució IP: %s\n"
-"Controlador: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Podeu conservar la configuració actual i assumir que ja heu definit un "
-"servidor DHCP. En aquest cas, verifiqueu que s'ha llegit correctament la "
-"Xarxa que utilitzeu per a la vostra xarxa local. No es reconfigurarà ni es "
-"modificarà la configuració del servidor DHCP.\n"
-"\n"
-"L'entrada DNS per defecte és el servidor de noms amb memòria cau que s'ha "
-"configurat al tallafoc. Podeu substituir-lo, per exemple, per la IP del DNS "
-"del vostre proveïdor d'accés.\n"
-"\n"
-"Si no, podeu reconfigurar la interfície i (re)configurar un servidor DHCP "
-"per al vostre ús.\n"
-"\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Adreça de la xarxa local"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"Configuració del servidor DHCP.\n"
-"\n"
-"Aquí podreu seleccionar diverses opcions per a la configuració del servidor "
-"DHCP.\n"
-"Si no sabeu el significat d'una opció, deixeu-la com està."
-
-#
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP d'aquest servidor DHCP"
-
-#
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "IP del Servidor DNS"
-
-#
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Nom intern de domini"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "L'adreça inicial del rang del DHCP"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "L'adreça final del rang del DHCP"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Lísing per defecte (en segons)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Lísing màxim (en segons)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Torna a configurar la interfície i el servidor DHCP"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "La xarxa local no finalitza amb '.0', ho deixem córrer."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"S'ha trobat un conflicte potencial d'adreça LAN en la configuració actual de "
-"%s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "S'està configurant..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"S'estan configurant les seqüències, instal·lant el programari, iniciant els "
-"servidors..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Hi ha hagut problemes en instal·lar el paquet %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Ja està tot configurat.\n"
-"Ara podeu compartir la connexió a Internet amb altres ordinadors de la "
-"vostra xarxa d'àrea local utilitzant la configuració automàtica de xarxa "
-"(DHCP) i\n"
-"un servidor intermediari transparent (SQUID)."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"Aquest programa és programari lliure i pot ser redistribuït sota els termes "
-"de la GNU GPL.\n"
-"\n"
-"Sintaxi: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - mostra aquesta ajuda     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Centre d'ajuda de Mandriva Linux"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Configuració del sistema"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Arranjament personalitzat"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Arranjament personalitzat del sistema"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Editable"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Camí"
-
-#
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Usuari"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Grup"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Permisos"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Edita la regla actual"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Aquí podeu veure els fitxers que es faran servir per ajustar els permisos, "
-"propietaris i grups a través de l'msec.\n"
-"També podeu editar les vostres pròpies regles, que sobreescriuran les regles "
-"predeterminades."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"El nivell de seguretat actual és %s.\n"
-"Esculli els permissos a veure/editar"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Puja"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Puja la regla actual un nivell"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Baixa"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Baixa la regla actual un nivell"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Afegeix una regla"
-
-#
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Afegeix una regla nova al final"
-
-#
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Elimina la regla seleccionada"
-
-#
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Edita"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "navega"
-
-#
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "usuari"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "grup"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "altres"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Lectura"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "Permet que \"%s\" llegeixi el fitxer"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Escriptura"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "Permet que \"%s\" escrigui el fitxer"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Executa"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Permet que \"%s\" executi el fitxer"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Usat per al directori:\n"
-" només el propietari del directori o del fitxer en aquest directori poden "
-"suprimir-lo"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Usa l'identificador del propietari (UID) per a l'execució"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Usa l'identificador del grup (GID) per a l'execució"
-
-#
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Usuari :"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Grup :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Usuari actual"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "Si ho marqueu, no es canviaran ni el propietari ni el grup"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Selecció del camí"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Propietat"
-
-#
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Configuració del servidor PXE"
-
-#
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Configuració del servidor d'instal·lació"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Ara configurareu l'ordinador per instal·lar un servidor PXE com a servidor "
-"DHCP\n"
-"i un servidor TFTP per construir un servidor d'instal·lació.\n"
-"Amb aquesta característica, altres ordinadors de la vostra xarxa local es "
-"podran instal·lar\n"
-"prenent aquest ordinador com a font.\n"
-"\n"
-"Assegureu-vos d'haver configurat l'accés a xarxes/Internet amb el "
-"drakconnect abans de continuar.\n"
-"\n"
-"Nota: per configurar una xarxa d'àrea local (LAN), us cal un adaptador de "
-"xarxa dedicat."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Si us plau, escolliu la interfície de xarxa que s'utilitzarà per al servidor "
-"dhcp."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfície %s (en la xarxa %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"El servidor DHCP permetrà que altres ordinadors arrenquin utilitzant PXE en "
-"l'interval d'adreces indicat.\n"
-"\n"
-"L'adreça de xarxa és %s utilitzant una màscara de xarxa de %s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "La IP inicial del DHCP"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "IP final del DHCP"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Si us plau, indiqueu on estarà disponible la imatge de la instal·lació.\n"
-"\n"
-"Si no teniu cap directori existent, copieu el contingut del CD o DVD.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Directori de la imatge de la instal·lació"
-
-#
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "No s'ha trobat cap imatge"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"No s'ha trobat cap imatge en CD o DVD; si us plau, copieu els programes "
-"d'instal·lació i els fitxers rpm."
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Si us plau, indiqueu on està ubicat el fitxer auto_install.cfg.\n"
-"\n"
-"Deixeu-ho en blanc si no voleu configurar el mode d'instal·lació "
-"automàtica.\n"
-"\n"
-
-#
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ubicació del fitxer auto_install.cfg"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Mode"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Canal"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr "Clau"
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Xarxa:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Mode:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Xifrat::"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Senyal:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "No"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Connecta"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Reescaneja"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Estat"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Desconnecta"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Refresca"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "Si"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "TOT"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "LOCAL"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Ignora"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Descripció dels camps:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr " (valor per defecte: %s)"
-
-#
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Nivell de seguretat:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Administrador de seguretat:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Opcions bàsiques"
-
-#
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Opcions de xarxa"
-
-#
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Opcions de sistema"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Comprovacions periòdiques"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Espereu si us plau, s'està configurant el nivell de seguretat..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Espereu si us plau, s'estan configurant les opcions de seguretat..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "No s'ha detectat cap targeta de so!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"No s'ha detectat cap targeta de so en el vostre ordinador. Si us plau, "
-"verifiqueu que teniu correctament inserida una targeta de so compatible amb "
-"Linux.\n"
-"\n"
-"\n"
-"Podeu visitar la nostra base de dades de maquinari a:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nota: si teniu una targeta de so ISA PnP, haureu de fer servir el programa "
-"alsaconf o sndconfig. Només cal que teclegeu \"alsaconf\" o \"sndconfig\" a "
-"la consola."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"el paquet 'ImageMagick' és necessari per a un correcte funcionament.\n"
-"Feu clic a \"D'acord\" per intal·lar-lo o a \"Cancel·la\" per sortir"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"coordenada x de la caixa de text\n"
-"en nombre de caràcters"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"coordenada y de la caixa de text\n"
-"en nombre de caràcters"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "amplada del text"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "alçària de la caixa de text"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"coordenada x de la cantonada superior\n"
-"esquerra de la barra de progrés"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"coordenada y de la cantonada superior\n"
-"esquerra de la barra de progrés"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "l'amplada de la barra de progrés"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "l'alçària de la barra de progrés"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Mostra el logotip a la consola"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Nom del tema"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "resolució definitiva"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "Desa el tema"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "s'està desant el tema Bootsplash..."
-
-#
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "escolliu una imatge"
-
-#
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Selecció del color de la barra de progrés"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr "Connectat a través d'un port sèrie o un cable usb"
-
-#
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "Afegeix un dispositiu SAI"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Benvingut a la utilitat de configuració de SAI.\n"
-"\n"
-"Aquí podreu afegir un nou SAI al vostre sistema.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-"Ara s'afegirà un dispositiu SAI.\n"
-"\n"
-"Preferiu autodetectar els dispositius SAI connectats a aquest ordinador o ?"
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "Detecció automàtica"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Detecció en procés"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Felicitats"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "L'auxiliar ha afegit els següents dispositius SAI amb èxit:"
-
-#
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "No s'ha trobat cap dispositiu SAI nou"
-
-#
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "Configuració del controlador del SAI"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "Si us plau, escolliu el model del vostre SAI."
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "Fabricant / Model:"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-"S'està configurant el SAI \"%s\" de \"%s\".\n"
-"Si us plau introdueix el nom, controlador i port."
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Nom:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr "El nom del vostre SAI"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr "El controlador que gestiona el teu SAI"
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Port:"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "El port al qual està connectat el vostre SAI"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "L'auxiliar ha configurat el nou dispositiu SAI \"%s\" amb èxit."
-
-#
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "Dispositius SAI"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Nom"
-
-#
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "Usuaris SAI"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr "Llistes de control d'accés"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr "Màscara IP"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Regles"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Acció"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Nivell"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "Nom ACL"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUPS"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Benvingut a les eines de configuració SAI"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "La connexió VPN està habilitada."
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de l'una connexió VPN ja s'ha dut a terme.\n"
-"\n"
-"Ara està habilitada.\n"
-"\n"
-"Què voleu fer?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "S'està inhabilitant VPN..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "La connexió VPN està inhabilitada."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "La connexió VPN està desactivada en aquests moments"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La configuració de l'una connexió VPN ja s'ha dut a terme.\n"
-"\n"
-"Ara està inhabilitada.\n"
-"\n"
-"Què voleu fer?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "S'està habilitant VPN..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "La connexió VPN està activada en aquests moments."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "Configuració de VPN simple."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Mòdul del kernel."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Polítiques de seguretat"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr ""
-
-#
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Fitxer de configuració"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s entrades"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Visualització"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Entrega"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Mostra la configuració"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr ""
-
-#
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Existeix!"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "interfícies"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr ""
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr ""
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr ""
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr ""
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr ""
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "left"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "nom de secció"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "auto"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "right"
-
-#
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "rightcert"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Edita secció"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Noms de secció"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "No es pot editar!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Elimina secció"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "camí"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "remot"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr ""
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr ""
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "fitxer real"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr ""
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr ""
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr ""
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr ""
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr ""
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr ""
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr ""
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr ""
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "Algoritme d'autenticació"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "Algoritme de compresió"
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr ""
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Remot"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr ""
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr ""
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "Passiu"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr ""
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr ""
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "Nom del certificat"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr ""
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "Nom de la clau privada"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr ""
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr ""
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr ""
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr ""
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr ""
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr ""
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "Grup DH"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Ordre"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr ""
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr ""
-
-#
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr ""
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr ""
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Bandera"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Direcció"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "ipsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr ""
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr ""
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr ""
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Font/destí"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "predeterminat"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "EUA (difusió)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "EUA (cable)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "EUA (cable-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Canadà (cable)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japó (difusió)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Japó (cable)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "Xina (difusió)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Europa de l'Oest"
-
-#
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Europa de l'Est"
-
-#
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "França [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Nova Zelanda"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "TV per cable australiana Optus"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Si us plau,\n"
-"entreu la vostra normativa de tv i el país"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "Normativa de TV:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Àrea:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "La cerca de canals de TV està en progrés..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "S'estan cercant canals de TV"
-
-#
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "S'ha produït un error en cercar els canals de TV"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Tingueu un bon dia!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Ara, podeu executar xawtv (sota X Window!) !\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "No s'ha detectat cap targeta de TV!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"No s'ha detectat cap targeta de TV en el vostre ordinador. Si us plau "
-"verifiqueu que teniu correctament inserida una targeta de Vídeo/TV "
-"compatible amb Linux.\n"
-"\n"
-"\n"
-"Podeu visitar la nostra base de dades de maquinari a:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Controladors alternatius"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "la llista de controladors alternatius per a aquesta targeta de so"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"aquest és el bus físic al qual el dispositiu està connectat (p.ex.: PCI, "
-"USB...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Identificació del bus"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- Dispositius PCI i USB: es llisten els identificadors PCI/USB del "
-"distribuïdor, del dispositiu, del subdistribuïdor i del subdispositiu"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- dispositius PCI: dóna la ranura PCI, el dispositiu i la funció d'aquesta "
-"targeta\n"
-"- dispositius EIDE: diu si el dispositiu està configurat com a mestre o com "
-"a esclau\n"
-"- dispositius SCSI: dóna el bus SCSI i els identificadors SCSI del dispositiu"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "Capacitat de la unitat"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"funcions especials del programa de control (capacitat per enregistrar CD o  "
-"preparat per a DVD)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "aquest camp descriu el dispositiu"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Fitxer de dispositiu antic"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "nom antic de dispositiu estàtic, usat en el paquet de desenvolupament"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Nou dispositiu devfs"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "nou nom de dispositiu dinàmic generat pel devfs intern del nucli"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Mòdul"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "el mòdul del nucli GNU/Linux que gestiona aquest dispositiu"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "Particions ampliades"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "el número de particions ampliades"
-
-#
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Geometria"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "Controlador de disc"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "tipus de dispositiu de maquinari"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Model"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "model de disc dur"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "port d'impressora de la xarxa"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "Particions primàries"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "el número de particions primàries"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "el nom del venedor del dispositiu"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "# Bus PCI"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "el bus PCI al qual el dispositiu està connectat"
-
-#
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "# dispositiu PCI"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "Número del dispositiu PCI"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr "Funció PCI #"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr ""
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "ID del venedor"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "ID del dispositiu"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr "Sub ID del venedor"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr "Sub ID del dispositiu"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr ""
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "ID dispositiu USB"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"el nucli GNU/Linux necessita executar un bucle de càlcul durant l'arrencada "
-"per iniciar un comptador de temps. El seu resultat s'emmagatzema com a "
-"bogomips com a manera d'\"avaluar\" la CPU."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Mida de la memòria cau"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "mida de la memòria cau de la CPU (segon nivell)"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Error Coma"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "si aquesta CPU té o no l'error Coma Cyrix 6x86"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Família cpuid"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "família de la CPU (p.ex. 6 per a la classe i686)"
-
-#
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Nivell cpuid"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "nivell d'informació que es pot obtenir mitjançant la instrucció cpuid"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Freqüència (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"freqüència en MHz (megahertz) de la CPU (que, en una primera aproximació "
-"grollera, es pot considerar com el nombre d'instruccions per segon que la "
-"CPU pot executar)"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Senyaladors"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Senyaladors de la CPU informats pel nucli."
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Error Fdiv"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"Els primers xips Pentium d'Intel fabricats tenen un defecte en el seu "
-"processador de punt flotant que no els permet aconseguir la precisió "
-"necessària en realitzar una divisió de punt flotant (FDIV)"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "FPU és present"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "\"sí\" indica que el processador té un coprocessador aritmètic"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Si l'FPU té o no un vector irq"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"\"sí\" significa que el coprocessador matemàtic te un vector d'excepció "
-"adjunt"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "Error F00f"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"els primers pentiums eren plens d'errors i es penjaven en decodificar el "
-"codi de byte F00F "
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "Error d'aturada"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Alguns del primers xips i486DX-100 no poden tornar amb fiabilitat al mode "
-"d'operació després que s'hagi utilitzat la instrucció \"halt\""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "subgeneració de la CPU"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "generació de la CPU (p.ex., 8 per al Pentium III, etc.)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Nom del model"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "nom oficial del distribuïdor de la cpu"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "nom de la CPU"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "ID del processador"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "número del processador"
-
-#
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Pas a pas del model"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "stepping de la CPU (número de submodel (generació))"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "el nom del distribuïdor del processador"
-
-#
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Protecció contra escriptura"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"el senyalador WP del registre CR0 de la CPU reforça la protecció contra "
-"escriptura a nivell de la pàgina de memòria, permetent que el processador "
-"eviti accessos del nucli no comprovats a la memòria de l'usuari (és a dir, "
-"que és un control contra errors)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Format del disquet"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "format dels disquets que es poden utilitzar en la unitat"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Canal EIDE/SCSI"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr "Identificador de disc"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr "normalment el número de sèrie del disc"
-
-#
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "Mida Instal·lada"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr "Mida instal·lada del banc de memòria"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "tipus del dispositiu de memòria"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Velocitat"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr ""
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "Fitxer de dispositiu"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "si la rodeta s'emula o no"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "el tipus de ratolí"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "el nom del ratolí"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Nombre de botons"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "el nombre de botons que té el ratolí"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "tipus de bus a què està connectat el ratolí."
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr "Protocol del ratolí usar per X11"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr "el protocol que usa l'entorn gràfic pel ratolí"
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Identificació"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Connexió"
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr ""
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "Errors"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr "FPU"
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Particions"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Característiques"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Opcions"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Ajuda"
-
-#
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Detecta les im_pressores automàticament"
-
-#
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Detecta els _mòdems automàticament"
-
-#
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Detecta automàticament les unitats _jaz"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Surt"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/Descripció de _camps"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Ajuda del Harddrake"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Quan hagueu seleccionat un dispositiu podreu veure'n la informació en els "
-"camps del marc dret (\"Informació\")"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Informeu d'un error"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Quant a..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Quant al Harddrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Aquest és el HardDrake, l'eina de configuració de maquinari de %s.\n"
-"<span foreground=\"royalblue3\">Versió:</span> %s\n"
-"<span foreground=\"royalblue3\">Autor:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "Harddrake2"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "S'ha detectat el següent maquinari"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Configura el mòdul"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Executa l'eina de configuració"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "desconegut"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Desconegut"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Varis"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"Feu clic a un dispositiu de l'arbre de l'esquerra per veure'n aquí la "
-"informació."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "secundari"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "primari"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "gravador"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Compte:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Contrasenya:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Nom màquina:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Si us plau, seleccioneu la disposició del vostre teclat."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Voleu que la tecla Enrere efectuï un Suprimeix en la consola?"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"El canvi està fet, però perquè sigui efectiu heu de sortir de la sessió "
-"actual"
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr ""
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Mostrar-ho només per al dia seleccionat"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Fitxer/_Nou"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Fitxer/_Obre"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Fitxer/De_sa"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Fitxer/_Anomena i desa"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Fitxer/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Opcions/Prova"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Ajuda/_Quant a.."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Autenticació"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "Usuari"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "Missatges"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr ""
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "cerca"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Eina per veure els registres"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Paràmetres"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "que coincideixin amb"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "però que no coincideixin amb"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Escolliu el fitxer"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Calendari"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Contingut del fitxer"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "Alerta de correu"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "L'auxiliar d'alerta ha fallat inesperadament:"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "espereu si us plau, s'està analitzant el fitxer: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Servidor World Wide Web Apache"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Sistema de resolució de nom de domini"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "Servidor FTP"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Servidor de correu Postfix"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Servidor Samba"
-
-#
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Servei Webmin"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Servei Xinetd"
-
-#
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "Configura el sistema d'alerta per correu"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "Atura el sistema d'alerta per correu"
-
-#
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Configuració de l'alerta de correu"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Benvingut a la utilitat de configuració del correu.\n"
-"\n"
-"Aquí podreu configurar el sistema d'alerta.\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Que voleu fer?"
-
-#
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Paràmetre dels serveis"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Rebreu un avís si algun dels serveis seleccionats ja no funciona"
-
-#
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr ""
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Rebreu un avís si la càrrega és més gran que aquest valor"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Càrrega"
-
-#
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "Configuració de l'avís"
-
-#
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Si us plau, entreu la vostra adreça electrònica"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr "i introduïu el nom (o l'adreça IP) del servidor SMTP que voleu usar"
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "L'auxiliar ha configurat l'alerta per correu amb èxit."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "L'auxiliar ha desactivat l'alerta per correu amb èxit."
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Anomena i desa..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Si us plau, seleccioneu el tipus del vostre ratolí."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Voleu emular el tercer botó?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Prova del ratolí"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Si us plau, comproveu el ratolí:"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "La xarxa està activa a la interfície %s"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr ""
-"La xarxa està caiguda a la interfície %s. Premeu a \"Configura la xarxa\""
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Connecta %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Desconnecta %s"
-
-#
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr "Monitoritza la xarxa"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Configura la xarxa"
-
-#: standalone/net_applet:73
-#, c-format
-msgid "Watched interface"
-msgstr ""
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Perfils"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "Obtenir ajuda en línia"
-
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr "Detecció interactiva d'intrusos"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Executa sempre al inici"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "El servei %s ha estat atacat per %s."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Tallafoc actiu: intrusió detectada"
-
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr ""
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr "Detalls de l'atac"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr ""
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Interfície de la xarxa: %s"
-
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr "Tipus d'atac: %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protocol: %s"
-
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr "Adreça IP de l'atacant: %s"
-
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr "Nom d'equip de l'atacant: %s"
-
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr "Servei atacat: %s"
-
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr "Port atacat: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr "Tipus d'atac ICMP: %s"
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Monitorització de la xarxa"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "Estadístiques globals"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "Instantània"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Mitjana"
-
-#
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"Velocitat\n"
-"d'enviament:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"Velocitat\n"
-"de recepció:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"Temps de\n"
-"connexió: "
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr "Usa la mateixa escala per enviat i rebut"
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Espereu, si us plau, s'està comprovant la vostra connexió..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "S'està desconnectant d'Internet "
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "S'està connectant a Internet "
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "La desconnexió d'Internet ha fallat."
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "S'ha completat la desconnexió d'Internet."
-
-#
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Connexió completa."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"La connexió ha fallat.\n"
-"Comproveu la vostra configuració al Centre de control de Mandriva Linux."
-
-#
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Configuració de color"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "enviats:"
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "rebut:"
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "mitjana"
-
-#
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Mesura local"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Avís: s'ha detectat una altra connexió a Internet, potser utilitzant la "
-"vostra xarxa"
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "No s'ha configurat cap connexió a Internet"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "S'estan llegint dades de les impressores instal·lades..."
-
-#
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "%s Eina de gestió d'impressores"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Accions"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Afegeix impressora"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Estableix com a _predeterminada"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Edita"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Esborra"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/Mode _expert"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Refresca"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Configura CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Cerca:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Aplica el filtre"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr ""
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Nom de la impressora"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Tipus de connexió"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Nom del servidor"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Afegeix impressora"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Afegeix una nova impressora al sistema"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Estableix com a predeterminat"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Estaleix la impressora seleccionada com la predeterminada"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Edita la impressora seleccionada"
-
-#
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Elimina la impressora seleccionada"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Actualitza la llista"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "Configura CUPS"
-
-#
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "Configura el sistema d'impressió CUPS"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Habilitat"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Deshabilitat"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Autors: "
-
-#
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "Gestió d'impressores %s"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"Es necessita que els paquets de SANE estiguin instal·lats per usar "
-"escàners.\n"
-"\n"
-"Vols instal·lar els paquets SANE?"
-
-#
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "S'està avortant Scannerdrake."
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-"No s'han pogut instal·lar els paquets necessaris per configurar l'escàner "
-"amb Scannerdrake."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Scannerdrake no s'iniciarà ara."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "S'estan cercant els escàners configurats..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "S'estan cercant escàners nous..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "S'està tornant a generar la llista dels escàners configurats..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "El %s no està suportat per aquesta versió de %s."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "S'ha trobat %s en %s, voleu configurar-lo automàticament?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s no és a la base de dades de l'escàner, voleu configurar-lo manualment?"
-
-#
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Seleccioneu un model d'escàner"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Model detectat: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr " (NO SUPORTAT)"
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "El %s no està suportat per a Linux."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "No instal·lis el fitxer de firmware"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-"És possible que el vostre %s necessiti que el firmware s'actualitzi cada cop "
-"que s'encengui."
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "Si aquest és el cas, podeu fer que es faci automàticament."
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"Per fer-ho, cal que subministreu els fitxers del firmware del vostre "
-"escànner per tal que es pugui instal·lar."
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"Podeu trobar el fitxer al CD o disquet que ve amb l'escànner o a la pàgina "
-"web del fabricant o a la vostra instal·lació de Windows."
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Instal·la el fitxer de firmware des de"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Seleccioneu el fitxer de firmware"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "El fitxer de firmware %s no existeix o no és pot llegir!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-"És possible que el vostre escànner necessiti que el firmware s'actualitzi "
-"cada cop que s'encengui."
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-"Per fer-ho, cal que subministreu els fitxers del firmware del vostre "
-"escànner per tal que es pugui instal·lar."
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr ""
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "Seleccioneu el fitxer de firmware per %s"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "No s'ha pogut instal·lar el fitxer de firmware per %s!"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "El fitxer de firmware pel vostre %s s'ha instal·lat correctament."
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "No es permet l'ús de %s"
-
-# Com que no se sap si %s serà masc. o fem., ja que es parla del printerdrake s'assumeix que es tracta d'una impressora i per tant poso  "la".
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"La %s s'ha de configurar amb el printerdrake.\n"
-"Podeu executar el printerdrake des del Centre de Control %s en la secció "
-"Maquinari."
-
-#
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Detecta automàticament els ports disponibles"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Si us plau seleccioneu el dispositiu al qual teniu connectat el %s"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Nota: els ports paral·lel no es poden detectar automàticament)"
-
-#
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "escolliu un dispositiu"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "S'estan cercant els escàners..."
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr ""
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "Atenció !"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-"El vostre %s no es pot configurar completament de forma automàtica.\n"
-"\n"
-"Calen ajustaments manuals. Si us plau editeu el fitxer de configuració /etc/"
-"sane.d/%s.conf. "
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Ara podeu escanejar documents utilitzant \"XSane\" o \"Kooka\" des de "
-"Multimèdia/Gràfics en el menú d'aplicacions."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-"El vostre %s ha estat configurat però pot ser possible que calguin "
-"ajustaments manuals per fer-lo funcionar. "
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "editar el fitxer de configuració /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"El vostre %s ha estat configurat.\n"
-"Ara podeu escanejar documents utilitzant \"XSane\" o \"Kooka\" des de "
-"Multimèdia/Gràfics en el menú d'aplicacions."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Els escàners\n"
-"\n"
-"%s\n"
-"estan disponibles al sistema.\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"L'escàner\n"
-"\n"
-"%s\n"
-"està disponible al sistema.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-"No s'ha trobat cap escàner que estigui disponible en el vostre sistema.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Cerca escàners nous"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Afegiu un escàner manualment"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Instal·la/Actualitza fitxers de firmware"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Compartició d'escàners"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Totes les màquines remotes"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Aquesta màquina"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Aquí podeu decidir si màquines remotes, i quines d'elles, han de poder "
-"accedir als escàners connectats a aquesta màquina."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"També podeu decidir aquí si aquesta màquina ha de poder accedir als escàners "
-"de màquines remotes."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-"Els escàners d'aquesta màquina estan disponibles per a altres ordinadors"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Compartició d'escàners amb els ordinadors centrals:"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Utilitza els escàners d'ordinadors remots"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Utilitza els escàners dels ordinadors centrals:"
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Compartició d'escàners locals"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-"Aquestes són les màquines en què l'escàner o escàners connectats localment "
-"han d'estar disponibles:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Afegeix un ordinador"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Edita l'ordinador seleccionat"
-
-#
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Elimina l'ordinador seleccionat"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Nom/Adreça IP de l'ordinador:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Escolliu l'ordinador on els escàners locals han d'estar disponibles:"
-
-#
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Heu d'introduir un nom d'ordinador o una adreça IP.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Aquest ordinador  ja és a la llista, no es pot tornar a afegir.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Utilització d'escàners remots"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Les màquines des de les quals s'han d'utilitzar els escàners son:"
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"saned ha d'estar instal·lat per compartir els escàners locals.\n"
-"\n"
-"Vols instal·lar el paquet de saned?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "Els vostre(s) escànner(s) no estaran disponibles a la xarxa."
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "S'han suprimit alguns dispositius en la classe \"%s\" de maquinari:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "S'han afegit alguns dispositius: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- s'ha afegit %s\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Comprovació de maquinari en curs"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Voleu executar l'eina de configuració adequada?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Escolliu el vostre idioma"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Llicència"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Configura el ratolí"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Detecció del disc dur"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Tipus d'instal·lació"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Escolliu el vostre teclat"
-
-#
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Particionament"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Formata les particions"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Paquets a instal·lar"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Instal·la el sistema"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "Contrasenya de l'administrador"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Afegeix un usuari"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Configura la xarxa"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Instal·la el carregador de l'arrencada"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Configura l'X"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Configura els serveis"
-
-#
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Instal·la les actualitzacions"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Surt de la instal·lació"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Això és correcte?"
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "Cap fitxer escollit"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Heu escollit un fitxer, no un directori"
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Heu escollit un directori, no un fitxer"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "No és un directori"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "No hi ha fitxer"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Expandeix l'arbre"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Redueix l'arbre"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Commuta entre pla i ordenat per grups"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s no està instal·lat\n"
-"Feu clic a \"Següent\" per instal·lar-lo o a \"Cancel·la\" per sortir"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "La instal·lació ha fallat"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "El vostre sistema està baix de recursos; podeu tenir algun problema en\n"
-#~ "instal·lar el Mandriva Linux. Si això passa, podeu provar d'instal·lar-lo "
-#~ "en\n"
-#~ "mode text. Per fer-ho, premeu 'F1' en arrencar des del CD-ROM i escriviu "
-#~ "'text'."
-
-#
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "S'està contactant amb el servidor Mandriva Linux per obtenir la llista de "
-#~ "rèpliques disponibles..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Instal·lació del Mandriva Linux %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "ATENCIÓ: Aquest dispositiu ja es va configurar per connectar-se a "
-#~ "Internet.\n"
-#~ "Només cal que accepteu per mantenir-lo configurat.\n"
-#~ "Si modifiqueu els camps inferiors, sobreescriureu aquesta configuració."
-
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - Crea disquets/CD Etherboot:\n"
-#~ "        \tLes màquines client sense disc necessiten imatge ROM a la "
-#~ "tarjeta de xarxa, o bé un disquet o CD\n"
-#~ "        \td'arrencada per iniciar la seqüència d'arrencada. El "
-#~ "drakTermServ ajudarà a generar\n"
-#~ "        \taquestes imatges, basades en la targeta de xarxa de la màquina "
-#~ "client.\n"
-#~ "        \t\t\n"
-#~ "        \tUn exemple senzill de la creació manual d'un disquet "
-#~ "d'arrencada des d'un 3Com 3c509:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Conjunt d'adreces IP dinàmiques:"
-
-#~ msgid "hd"
-#~ msgstr "hd"
-
-#~ msgid "tape"
-#~ msgstr "cinta"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "El lloc remot WebDAV ja està sincronitzat!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "La transferència WebDAV ha fallat!"
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Mida màxima\n"
-#~ " permesa per a Drakbackup (MB)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-Xarxa per webdav.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Usa l'arrencada gràfica"
-
-#~ msgid "first step creation"
-#~ msgstr "creació del primer pas"
-
-#
-#~ msgid "choose image file"
-#~ msgstr "trieu un fitxer d'imatge"
-
-#~ msgid "Browse"
-#~ msgstr "Navega"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Configura la imatge de presentació de l'arrencada"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "el color de la barra de progrés"
-
-#~ msgid "Preview"
-#~ msgstr "Vista prèvia"
-
-#~ msgid "Choose color"
-#~ msgstr "Escolliu un color"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "Fes que, per defecte, no apareguin els missatges del nucli"
-
-#~ msgid "Notice"
-#~ msgstr "Avís"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr ""
-#~ "Aquest tema encara no té cap pantalla de presentació de l'arrencada en %s!"
-
-#
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Abans heu de triar un fitxer d'imatge!"
-
-#
-#~ msgid "Generating preview..."
-#~ msgstr "S'està generant la vista prèvia..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "Vista prèvia del BootSplash %s (%s)"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "No hi ha cap unitat de disquet disponible"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Inseriu el disquet d'Actualització de Mòduls a la unitat %s"
-
-#~ msgid "No network card"
-#~ msgstr "No s'ha trobat cap targeta de xarxa"
-
-#, fuzzy
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "La identitat ssh ja està instal·lada"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "No heu seleccionat cap tipus de lletra"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "No hi ha cap navegador disponible! Si us plau, instal·leu-ne un"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "No teniu cap navegador instal·lat al sistema. Si us plau, instal·leu-ne "
-#~ "un si voleu navegar pel sistema d'ajuda"
-
-#
-#, fuzzy
-#~ msgid "Get YP server from DHCP"
-#~ msgstr "IP del Servidor DNS"
-
-#
-#, fuzzy
-#~ msgid "Get NTPD server from DHCP"
-#~ msgstr "IP del Servidor DNS"
-
-#, fuzzy
-#~ msgid "Upload the system configuration"
-#~ msgstr "Actualitza la configuració del menú"
-
-#, fuzzy
-#~ msgid "Active Firewall : intrusion detected"
-#~ msgstr "S'ha detectat la configuració del tallafoc!"
-
-#, fuzzy
-#~ msgid "Do you want to blacklist the attacker ?"
-#~ msgstr "Voleu finalitzar el joc?"
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Inseriu un disquet a la unitat\n"
-#~ "Se'n perdran totes les dades"
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "Inseriu un disquet formatat amb FAT a la unitat %s"
-
-#~ msgid "This floppy is not FAT formatted"
-#~ msgstr "Aquest disquet no està formatat amb FAT"
-
-#~ msgid ""
-#~ "To use this saved packages selection, boot installation with ``linux "
-#~ "defcfg=floppy''"
-#~ msgstr ""
-#~ "Per utilitzar aquesta selecció de paquets que heu desat, arrenqueu la "
-#~ "instal·lació amb \"linux defcfg=floppy\""
-
-#
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Carrega/Desa al disquet"
-
-#~ msgid ""
-#~ "Please choose load or save package selection on floppy.\n"
-#~ "The format is the same as auto_install generated floppies."
-#~ msgstr ""
-#~ "Si us plau, carregueu o deseu la selecció de paquets en el disquet.\n"
-#~ "El format és el mateix que en els disquets generats d'instal·lació "
-#~ "automàtica."
-
-#
-#~ msgid "Load from floppy"
-#~ msgstr "Carrega des del disquet"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Desa al disquet"
-
-#
-#~ msgid "Package selection"
-#~ msgstr "Selecció de paquets"
-
-#
-#~ msgid "Loading from floppy"
-#~ msgstr "S'està carregant des del disquet"
-
-#
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Inseriu un disquet amb la selecció de paquets"
-
-#~ msgid "multi-function device on parallel port #%s"
-#~ msgstr "dispositiu multifunció en port paral·lel #%s"
-
-#~ msgid "multi-function device on a parallel port"
-#~ msgstr "dispositiu multifunció en un port paral·lel"
-
-#~ msgid "multi-function device on USB"
-#~ msgstr "dispositiu multifunció en USB"
-
-#~ msgid "multi-function device on HP JetDirect"
-#~ msgstr "dispositiu multifunció en HP JetDirect"
-
-#~ msgid "multi-function device"
-#~ msgstr "dispositiu multifunció"
-
-#~ msgid "printing to %s"
-#~ msgstr "imprimint a %s"
-
-#~ msgid "using command %s"
-#~ msgstr "utilitzant l'ordre %s"
-
-#~ msgid "Application:"
-#~ msgstr "Aplicació:"
-
-#~ msgid "Release: "
-#~ msgstr "Llançament: "
-
-#~ msgid "Summary: "
-#~ msgstr "Resum: "
-
-#~ msgid "Bug Description/System Information"
-#~ msgstr "Descripció de l'error/Informació del sistema"
-
-#~ msgid "YOUR TEXT HERE"
-#~ msgstr "EL TEU TEXT AQUÍ"
-
-#~ msgid "Submit kernel version"
-#~ msgstr "Envia la versió del nucli"
-
-#~ msgid "Submit cpuinfo"
-#~ msgstr "Envia cpuinfo"
-
-#~ msgid "Submit lspci"
-#~ msgstr "Envia lspci"
-
-#~ msgid "NOT FOUND"
-#~ msgstr "NO S'HA TROBAT"
-
-#~ msgid "connecting to %s..."
-#~ msgstr "s'està connectant a %s ..."
-
-#~ msgid "Please enter a package name."
-#~ msgstr "Si us plau, introduïu un nom de paquet"
-
-#
-#~ msgid "Please enter summary text."
-#~ msgstr "Si us plau, introduïu el resum."
-
-#
-#~ msgid "Loading printer configuration... Please wait"
-#~ msgstr ""
-#~ "S'està carregant la configuració de la impressora... Si us plau, espereu"
-
-#, fuzzy
-#~ msgid "%s (was %s)"
-#~ msgstr "%s (Port %s)"
-
-#~ msgid "Root password"
-#~ msgstr "Contrasenya de root"
-
-#~ msgid "Do you want to recover your system?"
-#~ msgstr "Voleu recuperar el vostre sistema?"
-
-#~ msgid "Samba server"
-#~ msgstr "Servidor Samba"
-
-#~ msgid "Move"
-#~ msgstr "Mou"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "A quin disc ho voleu moure?"
-
-#~ msgid "Sector"
-#~ msgstr "Sector"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "A quin sector ho voleu moure?"
-
-#~ msgid "Moving"
-#~ msgstr "S'està movent"
-
-#~ msgid "Moving partition..."
-#~ msgstr "S'està movent la partició..."
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "S'ha produït un error en obrir %s per escriure: %s"
-
-#~ msgid ""
-#~ "This is HardDrake, a Mandriva Linux hardware configuration tool.\n"
-#~ "<span foreground=\"royalblue3\">Version:</span> %s\n"
-#~ "<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-#~ "tvignaud@mandriva.com&gt;\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Aquest és el HardDrake, l'eina de configuració de maquinari de Mandriva "
-#~ "Linux.\n"
-#~ "<span foreground=\"royalblue3\">Versió:</span> %s\n"
-#~ "<span foreground=\"royalblue3\">Autor:</span> Thierry Vignaud &lt;"
-#~ "tvignaud@mandriva.com&gt;\n"
-#~ "\n"
-
-#, fuzzy
-#~ msgid "Morrocco"
-#~ msgstr "Marroc"
-
-#, fuzzy
-#~ msgid "Server Information:"
-#~ msgstr "Informació"
-
-#
-#, fuzzy
-#~ msgid "Use SSL connection"
-#~ msgstr "Connexió ADSL"
-
-#, fuzzy
-#~ msgid "User Base:"
-#~ msgstr "Nom d'usuari"
-
-#, fuzzy
-#~ msgid "Base:"
-#~ msgstr "Nom:"
-
-#
-#, fuzzy
-#~ msgid "Scope:"
-#~ msgstr "Atura"
-
-#, fuzzy
-#~ msgid "Bind Server:"
-#~ msgstr "Servidor:"
-
-#, fuzzy
-#~ msgid "Users database"
-#~ msgstr "Base de dades LDAP"
-
-#~ msgid "OK"
-#~ msgstr "D'acord"
-
-#~ msgid "NO"
-#~ msgstr "NO"
-
-#~ msgid "YES"
-#~ msgstr "SÍ"
-
-#~ msgid ""
-#~ "The following options can be set to customize your\n"
-#~ "system security. If you need an explanation, look at the help tooltip.\n"
-#~ msgstr ""
-#~ "Les opcions següents es poden establir per personalitzar la seguretat\n"
-#~ "del vostre sistema. Si necessiteu una explicació, mireu el rètol "
-#~ "d'ajuda.\n"
-
-#~ msgid "The %s is not known by this version of Scannerdrake."
-#~ msgstr "Aquesta versió de l'Scannerdrake no coneix el %s."
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Txec (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Alemany"
-
-#~ msgid "Dvorak"
-#~ msgstr "Dvorak"
-
-#~ msgid "Spanish"
-#~ msgstr "Espanyol"
-
-#~ msgid "Finnish"
-#~ msgstr "Finès"
-
-#~ msgid "French"
-#~ msgstr "Francès"
-
-#~ msgid "Norwegian"
-#~ msgstr "Noruec"
-
-#~ msgid "Polish"
-#~ msgstr "Polonès"
-
-#~ msgid "Russian"
-#~ msgstr "Rus"
-
-#~ msgid "Swedish"
-#~ msgstr "Suec"
-
-#~ msgid "Albanian"
-#~ msgstr "Albanès"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Armeni (antic)"
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Armeni (màquina d'escriure)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Armeni (fonètic)"
-
-#~ msgid "Arabic"
-#~ msgstr "Àrab"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Azerbaidjanès (llatí)"
-
-#~ msgid "Belgian"
-#~ msgstr "Belga"
-
-#~ msgid "Bengali"
-#~ msgstr "Bengalí"
-
-#~ msgid "Bulgarian (phonetic)"
-#~ msgstr "Búlgar (fonètic)"
-
-#~ msgid "Bulgarian (BDS)"
-#~ msgstr "Búlgar (BDS)"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Brasiler (ABNT-2)"
-
-#~ msgid "Bosnian"
-#~ msgstr "Bosnià"
-
-#~ msgid "Belarusian"
-#~ msgstr "Bielorrús"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "Suís (disposició alemanya)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "Suís (disposició francesa)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Txec (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Alemany (sense tecles inoperatives)"
-
-#~ msgid "Devanagari"
-#~ msgstr "Devanagari"
-
-#~ msgid "Danish"
-#~ msgstr "Danès"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Dvorak (Estats Units)"
-
-#~ msgid "Dvorak (Esperanto)"
-#~ msgstr "Dvorak (Esperanto)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Dvorak (Noruec)"
-
-#~ msgid "Dvorak (Swedish)"
-#~ msgstr "Dvorak (Suec)"
-
-#~ msgid "Estonian"
-#~ msgstr "Estonià"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Georgià (disposició \"russa\")"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Georgià (disposició \"llatina\")"
-
-#~ msgid "Greek"
-#~ msgstr "Grec"
-
-#~ msgid "Greek (polytonic)"
-#~ msgstr "Grec (politònic)"
-
-#~ msgid "Gujarati"
-#~ msgstr "Gujarati"
-
-#~ msgid "Gurmukhi"
-#~ msgstr "Gurmukhi"
-
-#~ msgid "Hungarian"
-#~ msgstr "Hongarès"
-
-#~ msgid "Croatian"
-#~ msgstr "Croata"
-
-#~ msgid "Irish"
-#~ msgstr "Irlandès"
-
-#~ msgid "Israeli"
-#~ msgstr "Israelià"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Israelià (fonètic)"
-
-#~ msgid "Iranian"
-#~ msgstr "Iranià"
-
-#~ msgid "Icelandic"
-#~ msgstr "Islandès"
-
-#~ msgid "Italian"
-#~ msgstr "Italià"
-
-#~ msgid "Inuktitut"
-#~ msgstr "Inuktitut"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Japonès de 106 tecles"
-
-#~ msgid "Kannada"
-#~ msgstr "Kannada"
-
-#~ msgid "Korean keyboard"
-#~ msgstr "Teclat coreà"
-
-#~ msgid "Latin American"
-#~ msgstr "Espanyol sud-americà"
-
-#~ msgid "Laotian"
-#~ msgstr "Laosià"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Lituà AZERTY (antic)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Lituà AZERTY (nou)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Lituà \"fila de números\" QWERTY"
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Lituà \"fonètic\" QWERTY"
-
-#~ msgid "Latvian"
-#~ msgstr "Letó"
-
-#~ msgid "Malayalam"
-#~ msgstr "Malaialam"
-
-#~ msgid "Macedonian"
-#~ msgstr "Macedoni"
-
-#~ msgid "Myanmar (Burmese)"
-#~ msgstr "Myanmar (Burmese)"
-
-#~ msgid "Mongolian (cyrillic)"
-#~ msgstr "Mongol (ciríl·lic)"
-
-#~ msgid "Maltese (UK)"
-#~ msgstr "Maltès (Regne Unit)"
-
-#~ msgid "Maltese (US)"
-#~ msgstr "Maltès (Estats Units)"
-
-#~ msgid "Dutch"
-#~ msgstr "Holandès"
-
-#~ msgid "Oriya"
-#~ msgstr "Oriya"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Polonès (disposició qwerty)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Polonès (disposició qwertz)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Portuguès"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Canadenc (Quebec)"
-
-#~ msgid "Romanian (qwertz)"
-#~ msgstr "Romanès (qwertz)"
-
-#~ msgid "Romanian (qwerty)"
-#~ msgstr "Romanès (qwerty)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Rus (fonètic)"
-
-#~ msgid "Saami (norwegian)"
-#~ msgstr "Saami (Noruec)"
-
-#~ msgid "Saami (swedish/finnish)"
-#~ msgstr "Saami (suec/finès)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Eslovè"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Eslovac (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Eslovac (QWERTY)"
-
-#~ msgid "Serbian (cyrillic)"
-#~ msgstr "Serbi (ciríl·lic)"
-
-#~ msgid "Syriac"
-#~ msgstr "Siri"
-
-#~ msgid "Syriac (phonetic)"
-#~ msgstr "Siri (fonètic)"
-
-#~ msgid "Telugu"
-#~ msgstr "Telugu"
-
-#~ msgid "Tamil (ISCII-layout)"
-#~ msgstr "Tàmil (disposició ISCII)"
-
-#~ msgid "Tamil (Typewriter-layout)"
-#~ msgstr "Tàmil (disposició de màquina d'escriure)"
-
-#~ msgid "Thai keyboard"
-#~ msgstr "Teclat tai"
-
-#~ msgid "Tajik keyboard"
-#~ msgstr "Teclat tadjik"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Turc (tradicional, model \"F\")"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Turc (modern, model \"Q\")"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Ucraïnès"
-
-#~ msgid "Uzbek (cyrillic)"
-#~ msgstr "Uzbek (ciríl·lic)"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Vietnamita \"fila numèrica\" QWERTY"
-
-#~ msgid "Yugoslavian (latin)"
-#~ msgstr "Iugoslau (llatí)"
-
-#
-#~ msgid "No devices found"
-#~ msgstr "No s'ha trobat cap dispositiu"
-
-#~ msgid "Could not install necessary packages, %s cannot be started!"
-#~ msgstr ""
-#~ "No s'han pogut instal·lar els paquets necessaris, no es pot iniciar %s!"
-
-#~ msgid ""
-#~ "You do not have any configured Internet connection.\n"
-#~ "Please run \"Internet access\" in control center."
-#~ msgstr ""
-#~ "No teniu cap connexió a Internet configurada.\n"
-#~ "Si us plau executeu \"Accés a internet\" al centre de control"
-
-#~ msgid ""
-#~ "Welcome to the UPS configuration utility.\n"
-#~ "\n"
-#~ "Here, you'll be add a new UPS to your system.\n"
-#~ msgstr ""
-#~ "Benvingut a la utilitat de configuració de SAI.\n"
-#~ "\n"
-#~ "Aquí podreu afegir un nou SAI al vostre sistema.\n"
-
-#~ msgid "Enable multiple profiles"
-#~ msgstr "Habilita perfils múltiples"
-
-#~ msgid ""
-#~ "You now have the opportunity to download updated packages. These "
-#~ "packages\n"
-#~ "have been updated after the distribution was released. They may\n"
-#~ "contain security or bug fixes.\n"
-#~ "\n"
-#~ "To download these packages, you will need to have a working Internet \n"
-#~ "connection.\n"
-#~ "\n"
-#~ "Do you want to install the updates ?"
-#~ msgstr ""
-#~ "Ara teniu l'oportunitat de baixar paquets actualitzats. Aquests paquets\n"
-#~ "han estat actualitzats després de la publicació de la distribució. Poden "
-#~ "contenir\n"
-#~ "actualitzacions de seguretat o correccions d'errors.\n"
-#~ "\n"
-#~ "Per baixar aquests paquets necessitareu tenir una connexió a Internet\n"
-#~ "operativa.\n"
-#~ "\n"
-#~ "Voleu instal·lar les actualitzacions?"
-
-#
-#~ msgid "Installing bootloader"
-#~ msgstr "S'està instal·lant el carregador de l'arrencada"
-
-#~ msgid ""
-#~ "You may now provide options to module %s.\n"
-#~ "Options are in format ``name=value name2=value2...''.\n"
-#~ "For instance, ``io=0x300 irq=7''"
-#~ msgstr ""
-#~ "Ara podeu proporcionar les opcions per al mòdul %s.\n"
-#~ "Les opcions estan en el format \"nom=valor nom2=valor2 ...\".\n"
-#~ "Per exemple, \"io=0x300 irq=7\""
-
-#~ msgid "Configuring printer..."
-#~ msgstr "S'està configurant la impressora..."
-
-#
-#~ msgid "Configuring applications..."
-#~ msgstr "S'estan configurant les aplicacions..."
-
-#~ msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Afegeix aquesta impressora a Star Office/OpenOffice.org/GIMP"
-
-#~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Suprimeix aquesta impressora de Star Office/OpenOffice.org/GIMP"
-
-#~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "S'està afegint la impressora a Star Office/OpenOffice.org/GIMP"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/"
-#~ "GIMP."
-#~ msgstr ""
-#~ "S'ha afegit correctament la impressora \"%s\" a Star Office/OpenOffice."
-#~ "org/GIMP."
-
-#~ msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "És impossible d'afegir la impressora \"%s\" a Star Office/OpenOffice.org/"
-#~ "GIMP."
-
-#~ msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr "S'està suprimint la impressora d'Star Office/OpenOffice.org/GIMP"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully removed from Star Office/OpenOffice."
-#~ "org/GIMP."
-#~ msgstr ""
-#~ "La impressora \"%s\" ha estat suprimida d'Star Office/OpenOffice.org/GIMP "
-#~ "amb èxit."
-
-#~ msgid ""
-#~ "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "És impossible de suprimir la impressora \"%s\" d'Star Office/OpenOffice."
-#~ "org/GIMP."
-
-#~ msgid "<b>Congratulations for choosing Mandriva Linux!</b>"
-#~ msgstr "<b>Felicitats per triar Mandriva Linux!</b>"
-
-#~ msgid ""
-#~ "Your new Mandriva Linux operating system and its many applications is the "
-#~ "result of collaborative efforts between Mandriva developers and Mandriva "
-#~ "Linux contributors throughout the world."
-#~ msgstr ""
-#~ "El vostre nou sistema operatiu Mandriva Linux i les seves múltiples "
-#~ "aplicacions són el resultat de l'esforç col·laboratiu dels "
-#~ "desenvolupadors de Mandriva i els contribuïdors de Mandriva Linux al "
-#~ "voltant del món."
-
-#~ msgid ""
-#~ "We would like to thank everyone who participated in the development of "
-#~ "this latest release."
-#~ msgstr ""
-#~ "Voldríem donar les gràcies a tothom que hagi participat en el "
-#~ "desenvolupament d'aquesta versió."
-
-#~ msgid "<b>Discovery</b>"
-#~ msgstr "<b>Discovery</b>"
-
-#~ msgid ""
-#~ "The menu is task-oriented, with a single selected application per task."
-#~ msgstr "El menú està orientat a tasques, amb una sola aplicació per tasca."
-
-#~ msgid ""
-#~ "The powerful Open Source graphical desktop environment KDE is the desktop "
-#~ "of choice for the Discovery Pack."
-#~ msgstr ""
-#~ "El potent entorn gràfic d'escriptori de Codi Obert KDE és l'escriptori "
-#~ "triat pel Discovery Pack."
-
-#~ msgid "<b>OpenOffice.org</b>: The complete Linux office suite."
-#~ msgstr "<b>OpenOffice.org</b>: El paquet d'oficina complet per a Linux."
-
-#~ msgid ""
-#~ "<b>WRITER</b> is a powerful word processor for creating all types of text "
-#~ "documents. Documents may include images, diagrams and tables."
-#~ msgstr ""
-#~ "<b>WRITER</b> és un potent editor de text per crear tot tipus de "
-#~ "documents de text. Els documents poden incloure imatges, diagrames i "
-#~ "taules."
-
-#~ msgid ""
-#~ "<b>CALC</b> is a feature-packed spreadsheet which enables you to compute, "
-#~ "analyze and manage all of your data."
-#~ msgstr ""
-#~ "<b>CALC</b> és un full de càlcul amb moltes possibilitats que us permet "
-#~ "computar, analitzar i gestionar totes les vostres dades."
-
-#~ msgid ""
-#~ "<b>IMPRESS</b> is the fastest, most powerful way to create effective "
-#~ "multimedia presentations."
-#~ msgstr ""
-#~ "<b>IMPRESS</b> és la forma més ràpida i potent de crear presentacions "
-#~ "multimèdia."
-
-#~ msgid ""
-#~ "<b>DRAW</b> will produce everything from simple diagrams to dynamic 3D "
-#~ "illustrations."
-#~ msgstr ""
-#~ "<b>DRAW</b> por produir de tot, des de diagrames simples a il·lustracions "
-#~ "3D dinàmiques."
-
-#~ msgid "<b>Surf The Internet</b>"
-#~ msgstr "<b>Navega per Internet</b>"
-
-#~ msgid ""
-#~ "More than just a full-featured email client, <b>Kontact</b> also includes "
-#~ "an address book, a calendar and scheduling program, plus a tool for "
-#~ "taking notes!"
-#~ msgstr ""
-#~ "Més que només un complet client de correu, <b>Kontact</b> també inclou "
-#~ "una llibreta d'adreces, un calendari i un planificador, a més d'una eina "
-#~ "d'agafar notes!"
-
-#~ msgid "You can also:"
-#~ msgstr "També podeu:"
-
-#~ msgid "\t* browse the Web"
-#~ msgstr "\t navegar per la Web"
-
-#~ msgid "\t* chat"
-#~ msgstr "\t xatejar"
-
-#~ msgid "\t* organize a video-conference"
-#~ msgstr "\t* organitzar una vídeo conferència"
-
-#~ msgid "\t* create your own Web site"
-#~ msgstr "\t crear la vostra pàgina web"
-
-#~ msgid "<b>Multimedia</b>: Software for every need!"
-#~ msgstr "<b>Multimèdia</b>: Programari per totes les necessitats!"
-
-#~ msgid "Listen to audio CDs with <b>KsCD</b>."
-#~ msgstr "Escolteu CD d'àudio amb <b>KsCD</b>."
-
-#~ msgid "Listen to music files and watch videos with <b>Totem</b>."
-#~ msgstr "Escolteu fitxers musicals i mireu vídeos amb <b>Totem</b>."
-
-#~ msgid ""
-#~ "View and edit images and photos with <b>GQview</b> and <b>The Gimp!</b>"
-#~ msgstr "Veieu i editeu imatges i fotos amb <b>GQview</b>i <b>El Gimp</b>"
-
-#
-#~ msgid "Become a <b>Mandriva Club</b> member!"
-#~ msgstr "Esdeveniu un membre del <b>Mandriva Club</b>!"
-
-#~ msgid "\t* Full access to commercial applications"
-#~ msgstr "\t* Accés complet a aplicacions comercials"
-
-#~ msgid ""
-#~ "\t* Special download mirror list exclusively for Mandriva Club Members"
-#~ msgstr "\t* Llista de rèpliques exclusiva pels membres del Mandriva Club"
-
-#~ msgid "\t* Voting for software to put in Mandriva Linux"
-#~ msgstr "\t* Votació dels programes a posar en Mandriva Linux"
-
-#~ msgid "\t* Plus much more"
-#~ msgstr "\t* i molt més"
-
-#~ msgid "For more information, please visit <b>www.mandrakeclub.com</b>"
-#~ msgstr "Per més informació visiteu <b>www.mandrakeclub.com</b>"
-
-#~ msgid "Do you require assistance?"
-#~ msgstr "Necessiteu ajuda?"
-
-#~ msgid "<b>Mandriva Expert</b> is the primary source for technical support."
-#~ msgstr "<b>Mandriva Expert</b> és la font primària per suport tècnic."
-
-#~ msgid ""
-#~ "If you have Linux questions, subscribe to Mandriva Expert at <b>www."
-#~ "mandrivaexpert.com</b>"
-#~ msgstr ""
-#~ "Si teniu preguntes en quant a Linux, apunteu-vos a Mandriva Expert <b>www."
-#~ "mandrivaexpert.com</b>"
-
-#~ msgid ""
-#~ "If you would like to get involved, please subscribe to the \"Cooker\" "
-#~ "mailing list by visiting <b>mandrake-linux.com/cooker</b>"
-#~ msgstr ""
-#~ "Si voleu involucrar-vos, apunteu-vos a la llista de correu \"Cooker\" "
-#~ "visitant <b>mandrake-linux.com/cooker</b>"
-
-#~ msgid ""
-#~ "To learn more about our dynamic community, please visit <b>www.mandrake-"
-#~ "linux.com</b>!"
-#~ msgstr ""
-#~ "Per aprendre més en quant a la nostra dinàmica comunitat visiteu <b>www."
-#~ "mandrake-linux.com</b>!"
-
-#~ msgid ""
-#~ "Mandriva Linux includes the famous graphical desktops KDE and GNOME, plus "
-#~ "the latest versions of the most popular Open Source applications."
-#~ msgstr ""
-#~ "Mandriva Linux inclou els famosos entorns gràfics KDE i GNOME, a més de "
-#~ "les últimes versions de les aplicacions de Codi Font Obert més populars."
-
-#~ msgid ""
-#~ "Mandriva Linux is widely known as the most user-friendly and the easiest "
-#~ "to install and easy to use Linux distribution."
-#~ msgstr ""
-#~ "Mandriva Linux és ampliament coneguda com la distribució de Linux més "
-#~ "amigable, fàcil d'instal·lar i usar."
-
-#~ msgid ""
-#~ "\t* Find out Mandriva Linux on a bootable CD with <b>Mandrakemove</b>"
-#~ msgstr ""
-#~ "\t* Conegui Mandriva Linux en un CD autoarrancable amb <b>Mandrakemove</b>"
-
-#~ msgid ""
-#~ "\t* If you use Linux mostly for Office, Internet and Multimedia tasks, "
-#~ "<b>Discovery</b> perfectly meets your needs"
-#~ msgstr ""
-#~ "\t* Si useu Linux a l'oficina, per internet o per tasques multimèdia, "
-#~ "<b>Discovery</b> és perfecte per a les vostres necessitats"
-
-#~ msgid ""
-#~ "\t* If you appreciate the largest selection of software including "
-#~ "powerful development tools, <b>PowerPack</b> is for you"
-#~ msgstr ""
-#~ "\t* Si aprecieu la selecció de programari més gran, incloent eines de "
-#~ "desenvolupament, <b>PowerPack</b> és per tu"
-
-#~ msgid ""
-#~ "\t* If you require a full-featured Linux solution customized for small to "
-#~ "medium-sized networks, choose <b>PowerPack+</b>"
-#~ msgstr ""
-#~ "\t* Si necessiteu una solució Linux per a xarxes de petites a mitjanes, "
-#~ "escolliu <b>PowerPack+</b>"
-
-#~ msgid "Find out also our <b>Business Solutions</b>!"
-#~ msgstr "Conegui també les nostres <b>Solucions per empreses</b>!"
-
-#
-#~ msgid "<b>Become a Mandriva Club member!</b>"
-#~ msgstr "<b>Esdeveniu un membre del Mandriva Club!</b>"
-
-#~ msgid "<b>Do you require assistance?</b>"
-#~ msgstr "<b>Necessiteu ajuda?</b>"
-
-#~ msgid "This is the Mandriva Linux <b>Download version</b>."
-#~ msgstr "Això és Mandriva Linux <b>versió de descàrrega</b>."
-
-#~ msgid ""
-#~ "The free download version does not include commercial software, and "
-#~ "therefore may not work with certain modems (such as some ADSL and RTC) "
-#~ "and video cards (such as ATI® and NVIDIA®)."
-#~ msgstr ""
-#~ "La versió de descarrega gratuïta no inclou programari comercial, i per "
-#~ "tant, pot no funcionar amb alguns mòdems (com ADSL i RTC) i targetes "
-#~ "gràfiques (com ATI® i NVIDIA®)."
-
-#~ msgid ""
-#~ "Your new Mandriva Linux distribution and its many applications are the "
-#~ "result of collaborative efforts between Mandriva developers and Mandriva "
-#~ "Linux contributors throughout the world."
-#~ msgstr ""
-#~ "La vostra nova distribució Mandriva Linux i les seves múltiples "
-#~ "aplicacions són el resultat de l'esforç col·laboratiu dels "
-#~ "desenvolupadors de Mandriva i els contribuïdors de Mandriva Linux al "
-#~ "voltant del món."
-
-#~ msgid "<b>PowerPack+</b>"
-#~ msgstr "<b>PowerPack+</b>"
-
-#~ msgid ""
-#~ "It is the only Mandriva Linux product that includes the groupware "
-#~ "solution."
-#~ msgstr "És l'únic producte Mandriva Linux que inclou la solució groupware."
-
-#~ msgid ""
-#~ "When you log into your Mandriva Linux system for the first time, you can "
-#~ "choose between several popular graphical desktops environments, "
-#~ "including: KDE, GNOME, WindowMaker, IceWM, and others."
-#~ msgstr ""
-#~ "Quan entreu per primer cop a Mandriva Linux, podeu escollir entre els "
-#~ "populars entorns gràfics d'escriptori, incloent: KDE, GNOME, WindowMaker, "
-#~ "IceWM, i altres."
-
-#~ msgid ""
-#~ "\t* Listen to audio CDs and music files with <b>KsCD</b> and <b>Totem</b>"
-#~ msgstr ""
-#~ "\t* Escolteu CD d'àudio i fitxers de música amb <b>KsCD</b> i <b>Totem</b>"
-
-#~ msgid ""
-#~ "PowerPack+ includes everything needed for developing and creating your "
-#~ "own software, including:"
-#~ msgstr ""
-#~ "PowerPack+ inclou tot el que necessiteu per desenvolupar i crear els "
-#~ "vostres programes, incloent:"
-
-#~ msgid ""
-#~ "\t* <b>Kdevelop</b>: a full featured, easy to use Integrated Development "
-#~ "Environment for C++ programming"
-#~ msgstr ""
-#~ "\t* <b>Kdevelop</b>: Un entorn integrat de desenvolupament per programar "
-#~ "amb C++ amb moltes opcions i fàcil d'usar,"
-
-#~ msgid "\t* <b>GCC</b>: the GNU Compiler Collection"
-#~ msgstr "\t* <b>GCC</b>: la Colecció de Compiladors GNU"
-
-#~ msgid "\t* <b>GDB</b>: the GNU Project debugger"
-#~ msgstr "\t* <b>GDB</b>: el debugger del projecte GNU"
-
-#~ msgid "\t* Address Book (server and client)"
-#~ msgstr "\t* Llibreta d'adreces (servidor i client)"
-
-#~ msgid ""
-#~ "Your new Mandriva Linux distribution is the result of collaborative "
-#~ "efforts between Mandriva developers and Mandriva Linux contributors "
-#~ "throughout the world."
-#~ msgstr ""
-#~ "La vostra nova distribució Mandriva Linux és el resultat de l'esforç "
-#~ "col·laboratiu dels desenvolupadors de Mandriva i els contribuïdors de "
-#~ "Mandriva Linux al voltant del món."
-
-#~ msgid ""
-#~ "We would like to thank everyone who participated in the development of "
-#~ "our latest release."
-#~ msgstr ""
-#~ "Voldríem donar les gracies a tothom que hagi participat en el "
-#~ "desenvolupament d'aquesta versió."
-
-#~ msgid "<b>PowerPack</b>"
-#~ msgstr "<b>PowerPack</b>"
-
-#~ msgid ""
-#~ "PowerPack includes everything needed for developing and creating your own "
-#~ "software, including:"
-#~ msgstr ""
-#~ "PowerPack inclou tot el que necessiteu per desenvolupar i crear els "
-#~ "vostres programes, incloent:"
-
-#~ msgid "And of course the editors!"
-#~ msgstr "I per suposat els editors!"
-
-#~ msgid "Installation of %s failed. The following error occurred:"
-#~ msgstr "Ha fallat la instal·lació de %s. S'ha produït l'error següent:"
-
-#~ msgid ""
-#~ "We need to install ntp package\n"
-#~ " to enable Network Time Protocol\n"
-#~ "\n"
-#~ "Do you want to install ntp ?"
-#~ msgstr ""
-#~ "Es necessari instal·lar el paquet ntp\n"
-#~ " per habilitar el Network Time Protocol\n"
-#~ "\n"
-#~ "Vols instal·lar ntp?"
-
-#~ msgid ""
-#~ "The setup of a VPN connection has already been done.\n"
-#~ "\n"
-#~ "It's currently enabled.\n"
-#~ "\n"
-#~ "What would you like to do ?"
-#~ msgstr ""
-#~ "La configuració de l'una connexió VPN ja s'ha dut a terme.\n"
-#~ "\n"
-#~ "Ara està habilitada.\n"
-#~ "\n"
-#~ "Què voleu fer?"
-
-#~ msgid ""
-#~ "The setup of a VPN connection has already been done.\n"
-#~ "\n"
-#~ "It's currently disabled.\n"
-#~ "\n"
-#~ "What would you like to do ?"
-#~ msgstr ""
-#~ "La configuració de l'una connexió VPN ja s'ha dut a terme.\n"
-#~ "\n"
-#~ "Ara està inhabilitada.\n"
-#~ "\n"
-#~ "Què voleu fer?"
-
-#~ msgid "Set of tools to read and send mail and news and to browse the Web"
-#~ msgstr ""
-#~ "Conjunt d'eines per llegir i enviar correu i notícies i per navegar pel "
-#~ "Web"
-
-#~ msgid ""
-#~ "Before continuing, you should carefully read the terms of the license. "
-#~ "It\n"
-#~ "covers the entire Mandriva Linux distribution. If you do agree with all "
-#~ "the\n"
-#~ "terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n"
-#~ "will reboot your computer."
-#~ msgstr ""
-#~ "Abans de continuar, llegiu atentament les clàusules de la llicència. "
-#~ "Cobreix\n"
-#~ "tota la distribució Mandriva Linux. Si esteu d'acord amb tots els termes "
-#~ "de la\n"
-#~ "llicència, feu clic al quadre \"%s\"; si no, prémer el botó \"%s\"\n"
-#~ "reiniciarà el vostre ordinador."
-
-#~ msgid ""
-#~ "GNU/Linux is a multi-user system, meaning each user may have their own\n"
-#~ "preferences, their own files and so on. You can read the ``Starter "
-#~ "Guide''\n"
-#~ "to learn more about multi-user systems. But unlike \"root\", who is the\n"
-#~ "system administrator, the users you add at this point will not be\n"
-#~ "authorized to change anything except their own files and their own\n"
-#~ "configurations, protecting the system from unintentional or malicious\n"
-#~ "changes that impact on the system as a whole. You will have to create at\n"
-#~ "least one regular user for yourself -- this is the account which you "
-#~ "should\n"
-#~ "use for routine, day-to-day use. Although it is very easy to log in as\n"
-#~ "\"root\" to do anything and everything, it may also be very dangerous! A\n"
-#~ "very simple mistake could mean that your system will not work any more. "
-#~ "If\n"
-#~ "you make a serious mistake as a regular user, the worst that will happen "
-#~ "is\n"
-#~ "that you will lose some information, but not affect the entire system.\n"
-#~ "\n"
-#~ "The first field asks you for a real name. Of course, this is not "
-#~ "mandatory\n"
-#~ "-- you can actually enter whatever you like. DrakX will use the first "
-#~ "word\n"
-#~ "you typed in this field and copy it to the \"%s\" field, which is the "
-#~ "name\n"
-#~ "this user will enter to log onto the system. If you like, you may "
-#~ "override\n"
-#~ "the default and change the user name. The next step is to enter a "
-#~ "password.\n"
-#~ "From a security point of view, a non-privileged (regular) user password "
-#~ "is\n"
-#~ "not as crucial as the \"root\" password, but that is no reason to "
-#~ "neglect\n"
-#~ "it by making it blank or too simple: after all, your files could be the\n"
-#~ "ones at risk.\n"
-#~ "\n"
-#~ "Once you click on \"%s\", you can add other users. Add a user for each "
-#~ "one\n"
-#~ "of your friends: your father or your sister, for example. Click \"%s\" "
-#~ "when\n"
-#~ "you have finished adding users.\n"
-#~ "\n"
-#~ "Clicking the \"%s\" button allows you to change the default \"shell\" "
-#~ "for\n"
-#~ "that user (bash by default).\n"
-#~ "\n"
-#~ "When you have finished adding users, you will be asked to choose a user "
-#~ "who\n"
-#~ "can automatically log into the system when the computer boots up. If you\n"
-#~ "are interested in that feature (and do not care much about local "
-#~ "security),\n"
-#~ "choose the desired user and window manager, then click \"%s\". If you "
-#~ "are\n"
-#~ "not interested in this feature, uncheck the \"%s\" box."
-#~ msgstr ""
-#~ "El GNU/Linux és un sistema multiusuari; això vol dir que cada usuari pot\n"
-#~ "tenir les seves pròpies preferències, els seus propis fitxers, etc. Podeu "
-#~ "llegir\n"
-#~ "la ``Guia d'iniciació''\n"
-#~ " per aprendre més coses sobre els sistemes\n"
-#~ "multiusuari. Però, a diferència del \"root\", que és l'administrador del "
-#~ "sistema,\n"
-#~ "als usuaris que afegiu aquí no se'ls permetrà modificar res tret dels "
-#~ "seus propis\n"
-#~ "fitxers i configuracions, protegint així el sistema de canvis, "
-#~ "intencionats o no, \n"
-#~ " que tenen efecte sobre tot el sistema . Cal que us creeu, com a mínim, "
-#~ "un usuari\n"
-#~ "normal, i és aquest compte el que heu d'utilitzar per a l'ús quotidià. "
-#~ "Tot i que\n"
-#~ "és molt fàcil entrar com a \"root\" per a tot, també pot ser molt "
-#~ "perillós: la més\n"
-#~ "petita errada podria significar que el sistema deixés de funcionar. Si "
-#~ "cometeu\n"
-#~ "una errada greu com a usuari normal el pitjor que pot passar és que "
-#~ "perdeu\n"
-#~ "algunes daDES, però sense afectar a tot el sistema.\n"
-#~ "\n"
-#~ "Primer, heu d'introduir el vostre nom real. Per suposat, això no és "
-#~ "obligatori,\n"
-#~ "ja que podeu introduir el que vulgueu. DrakX agafarà la primera paraula\n"
-#~ "que heu introduït en aquest camp i la copiarà en el camp \"%s\", que serà "
-#~ "el\n"
-#~ "nom que utilitzarà aquest usuari per entrar al sistema (ho podeu canviar "
-#~ "si\n"
-#~ "voleu). Després cal que introduïu una contrasenya. Des del punt de vista "
-#~ "de\n"
-#~ "la seguretat, una contrasenya d'un usuari no privilegiat (habitual) no és "
-#~ "tan\n"
-#~ "important com la del \"root\" des del punt de vista de la seguretat, però "
-#~ "no hi\n"
-#~ "ha cap raó per menystenir-la, deixant-la en blanc o fent-la massa "
-#~ "senzilla: al\n"
-#~ "cap i a la fi, els vostres fitxers poden estar en joc.\n"
-#~ "\n"
-#~ "Un cop hagueu fet clic a \"%s\" podreu afegir altres usuaris. Afegiu-ne "
-#~ "un\n"
-#~ "per a tothom que hagi de fer servir l'ordinador. Feu clic a \"%s\" quan "
-#~ "hagueu\n"
-#~ "acabat d'afegir-ne.\n"
-#~ "\n"
-#~ "Feu clic al botó \"%s\" per canviar l'intèrpret d'ordres (\"shell\") per "
-#~ "defecte\n"
-#~ "(bash) de l'usuari seleccionat. \n"
-#~ "\n"
-#~ "Quan hagueu acabat d'afegir usuaris, se us proposarà decidir quin usuari\n"
-#~ "entrarà automàticament en el sistema en arrencar l'ordinador. Si us\n"
-#~ "interessa aquesta característica (i no us importa gaire la seguretat "
-#~ "local), \n"
-#~ "trieu l'usuari i el gestor de finestres desitjat i feu clic a \"%s\".\n"
-#~ "Si no hi esteu interessat, desactiveu el quadre \"%s\"."
-
-#~ msgid ""
-#~ "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-#~ "selected package is located on another CD-ROM, DrakX will eject the "
-#~ "current\n"
-#~ "CD and ask you to insert the correct CD as required."
-#~ msgstr ""
-#~ "La instal·lació del Mandriva Linux està repartida en diversos CD-ROM. Si\n"
-#~ "un dels paquets escollits està en un altre CD-ROM, DrakX expulsarà el CD\n"
-#~ "actual i us demanarà que n'inseriu un altre."
-
-#~ msgid ""
-#~ "It is now time to specify which programs you wish to install on your\n"
-#~ "system. There are thousands of packages available for Mandriva Linux, "
-#~ "and\n"
-#~ "to make it simpler to manage the packages have been placed into groups "
-#~ "of\n"
-#~ "similar applications.\n"
-#~ "\n"
-#~ "Packages are sorted into groups corresponding to a particular use of "
-#~ "your\n"
-#~ "machine. Mandriva Linux sorts packages groups in four categories. You "
-#~ "can\n"
-#~ "mix and match applications from the various categories, so a\n"
-#~ "``Workstation'' installation can still have applications from the\n"
-#~ "``Development'' category installed.\n"
-#~ "\n"
-#~ " * \"%s\": if you plan to use your machine as a workstation, select one "
-#~ "or\n"
-#~ "more of the groups that are in the workstation category.\n"
-#~ "\n"
-#~ " * \"%s\": if you plan on using your machine for programming, select the\n"
-#~ "appropriate groups from that category.\n"
-#~ "\n"
-#~ " * \"%s\": if your machine is intended to be a server, select which of "
-#~ "the\n"
-#~ "more common services you wish to install on your machine.\n"
-#~ "\n"
-#~ " * \"%s\": this is where you will choose your preferred graphical\n"
-#~ "environment. At least one must be selected if you want to have a "
-#~ "graphical\n"
-#~ "interface available.\n"
-#~ "\n"
-#~ "Moving the mouse cursor over a group name will display a short "
-#~ "explanatory\n"
-#~ "text about that group. If you unselect all groups when performing a "
-#~ "regular\n"
-#~ "installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-#~ "different options for a minimal installation:\n"
-#~ "\n"
-#~ " * \"%s\": install the minimum number of packages possible to have a\n"
-#~ "working graphical desktop.\n"
-#~ "\n"
-#~ " * \"%s\": installs the base system plus basic utilities and their\n"
-#~ "documentation. This installation is suitable for setting up a server.\n"
-#~ "\n"
-#~ " * \"%s\": will install the absolute minimum number of packages "
-#~ "necessary\n"
-#~ "to get a working Linux system. With this installation you will only have "
-#~ "a\n"
-#~ "command line interface. The total size of this installation is about 65\n"
-#~ "megabytes.\n"
-#~ "\n"
-#~ "You can check the \"%s\" box, which is useful if you are familiar with "
-#~ "the\n"
-#~ "packages being offered or if you want to have total control over what "
-#~ "will\n"
-#~ "be installed.\n"
-#~ "\n"
-#~ "If you started the installation in \"%s\" mode, you can unselect all "
-#~ "groups\n"
-#~ "to avoid installing any new package. This is useful for repairing or\n"
-#~ "updating an existing system."
-#~ msgstr ""
-#~ "Ha arribat el moment d'indicar els programes que voleu instal·lar en el\n"
-#~ "sistema. Mandriva Linux té milers de paquets, i per facilitar-ne la\n"
-#~ "gestió s'han distribuït en grups d'aplicacions similars.\n"
-#~ "\n"
-#~ "Els paquets s'agrupen segons l'ús que vulgueu donar a l'ordinador.\n"
-#~ "Mandriva Linux agrupa els paquets en quatre categories. Podeu mesclar i "
-#~ "fer\n"
-#~ "coincidir aplicacions de grups diversos, de manera que una instal·lació\n"
-#~ "d'``Estació de treball'' pot perfectament tenir instal·lades aplicacions\n"
-#~ "de la categoria ``Desenvolupament'' \n"
-#~ " * \"%s\": si voleu utilitzar l'ordinador com a estació de treball,\n"
-#~ "seleccioneu un o més grups de la categoria estació de treball.\n"
-#~ "\n"
-#~ " * \"%s\": si penseu utilitzar la vostra màquina per programar, escolliu "
-#~ "els\n"
-#~ "grups adients d'aquesta categoria.\n"
-#~ "\n"
-#~ " * \"%s\":  si l'ordinador s'ha d'utilitzar com a servidor, seleccioneu\n"
-#~ "quins dels serveis més habituals voleu instal·lar\n"
-#~ "\n"
-#~ " * \"%s\": aquí és on escollireu quin és el vostre entorn gràfic\n"
-#~ "preferit. Heu de seleccionar-ne un com a mínim si voleu tenir una\n"
-#~ "interfície gràfica.\n"
-#~ "\n"
-#~ "Si moveu el cursor per sobre d'un nom de grup veureu una breu explicació\n"
-#~ "d'aquest grup. Si desseleccioneu tots els grups quan estigueu fent una\n"
-#~ "instal·lació normal (i no una actualització), se us presentarà un "
-#~ "diàleg \n"
-#~ "proposant-vos diferents opcions per a una instal·lació mínima:\n"
-#~ "\n"
-#~ " * \"%s\": instal·la els mínims paquets necessaris per tenir un\n"
-#~ "entorn gràfic funcional\n"
-#~ "\n"
-#~ " * \"%s\": instal·la el sistema base i les utilitats bàsiques amb la "
-#~ "seva\n"
-#~ "documentació. Aquesta instal·lació és adequada per configurar un "
-#~ "servidor;\n"
-#~ "\n"
-#~ " * \"%s\": instal·la el nombre mínim de paquets necessari per aconseguir "
-#~ "un\n"
-#~ "sistema Linux operatiu, només amb una interfície de línia d'ordres. "
-#~ "Aquesta\n"
-#~ "instal·lació ocupa uns 65 MB.\n"
-#~ "\n"
-#~ "Podeu marcar la casella \"%s\", que és útil si esteu familiaritzat amb "
-#~ "els\n"
-#~ "diversos paquets o si voleu tenir un control total sobre el que "
-#~ "s'instal·larà.\n"
-#~ "\n"
-#~ "Si heu començat la instal·lació en el mode \"%s\", podeu desseleccionar \n"
-#~ "tots els grups si voleu evitar que s'instal·li cap paquet nou. Això és "
-#~ "útil \n"
-#~ "per reparar o actualitzar un sistema existent."
-
-#~ msgid ""
-#~ "If you told the installer that you wanted to individually select "
-#~ "packages,\n"
-#~ "it will present a tree containing all packages classified by groups and\n"
-#~ "subgroups. While browsing the tree, you can select entire groups,\n"
-#~ "subgroups, or individual packages.\n"
-#~ "\n"
-#~ "Whenever you select a package on the tree, a description appears on the\n"
-#~ "right to let you know the purpose of the package.\n"
-#~ "\n"
-#~ "!! If a server package has been selected, either because you "
-#~ "specifically\n"
-#~ "chose the individual package or because it was part of a group of "
-#~ "packages,\n"
-#~ "you will be asked to confirm that you really want those servers to be\n"
-#~ "installed. By default Mandriva Linux will automatically start any "
-#~ "installed\n"
-#~ "services at boot time. Even if they are safe and have no known issues at\n"
-#~ "the time the distribution was shipped, it is entirely possible that that\n"
-#~ "security holes were discovered after this version of Mandriva Linux was\n"
-#~ "finalized. If you do not know what a particular service is supposed to "
-#~ "do\n"
-#~ "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
-#~ "install the listed services and they will be started automatically by\n"
-#~ "default during boot. !!\n"
-#~ "\n"
-#~ "The \"%s\" option is used to disable the warning dialog which appears\n"
-#~ "whenever the installer automatically selects a package to resolve a\n"
-#~ "dependency issue. Some packages have relationships between each them "
-#~ "such\n"
-#~ "that installation of one package requires that some other program is "
-#~ "also\n"
-#~ "required to be installed. The installer can determine which packages are\n"
-#~ "required to satisfy a dependency to successfully complete the "
-#~ "installation.\n"
-#~ "\n"
-#~ "The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-#~ "package list created during a previous installation. This is useful if "
-#~ "you\n"
-#~ "have a number of machines that you wish to configure identically. "
-#~ "Clicking\n"
-#~ "on this icon will ask you to insert a floppy disk previously created at "
-#~ "the\n"
-#~ "end of another installation. See the second tip of last step on how to\n"
-#~ "create such a floppy."
-#~ msgstr ""
-#~ "Si heu dit a l'instal·lador que volíeu seleccionar els paquets "
-#~ "individualment\n"
-#~ "se us presentarà un arbre amb tots els paquets classificats per grups i\n"
-#~ "subgrups. Mentre navegueu per l'arbre, podeu seleccionar grups complets,\n"
-#~ "subgrups o paquets individuals.\n"
-#~ "\n"
-#~ "Cada cop que seleccioneu un paquet de l'arbre, apareixerà una descripció "
-#~ "a \n"
-#~ "la dreta que us informarà de la finalitat del paquet.\n"
-#~ "\n"
-#~ "Si heu seleccionat un paquet de servidor, intencionadament o perquè\n"
-#~ "formava part d'un grup, se us demanarà que confirmeu si realment voleu\n"
-#~ "instal·lar aquests servidors. Per defecte, Mandriva Linux iniciarà i "
-#~ "instal·larà automàticament qualsevol servidor durant l'arrencada. Tot i "
-#~ "que\n"
-#~ "siguin segurs i no tinguin cap problema conegut quan es publica la\n"
-#~ "distribució, és totalment possible que es descobreixin forats de "
-#~ "seguretat\n"
-#~ "després que aquesta versió de Mandriva Linux quedi finalitzada.\n"
-#~ "Si no sabeu què se suposa que fa un servei en particular, o per què "
-#~ "s'està\n"
-#~ "instal·lant, feu clic a \"%s\". Per defecte, si feu clic a \"%s\" els "
-#~ "serveis\n"
-#~ "llistats s'instal·laran i s'iniciaran automàticament durant l'arrencada.\n"
-#~ "\n"
-#~ "L'opció \"%s\" s'utilitza per inhabilitar el diàleg d'advertència que\n"
-#~ "apareix quan l'instal·lador selecciona automàticament un paquet per "
-#~ "resoldre\n"
-#~ "un tema de dependències. Alguns paquets estan relacionats els uns amb "
-#~ "els\n"
-#~ "altres, de manera que la instal·lació d'un paquet fa que calgui "
-#~ "instal·lar\n"
-#~ "també algun altre programa. L'instal·lador pot determinar quins paquets "
-#~ "calen\n"
-#~ "per satisfer una dependència i completar la instal·lació "
-#~ "satisfactòriament.\n"
-#~ "\n"
-#~ "La diminuta icona d'un disquet al peu de la llista us permet carregar "
-#~ "una\n"
-#~ "llista de paquets creada en una instal·lació anterior. Això és útil si "
-#~ "teniu\n"
-#~ "un cert nombre d'ordinadors que voleu configurar de manera idèntica. Si "
-#~ "feu\n"
-#~ "clic a aquesta icona se us demanarà que inseriu un disquet creat "
-#~ "anteriorment\n"
-#~ "al final d'una altra instal·lació. Vegeu el segon suggeriment de l'últim "
-#~ "pas\n"
-#~ "per saber com crear aquest disquet."
-
-#~ msgid ""
-#~ "You will now set up your Internet/network connection. If you wish to\n"
-#~ "connect your computer to the Internet or to a local network, click \"%s"
-#~ "\".\n"
-#~ "Mandriva Linux will attempt to auto-detect network devices and modems. "
-#~ "If\n"
-#~ "this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
-#~ "configure the network, or to do it later, in which case clicking the \"%s"
-#~ "\"\n"
-#~ "button will take you to the next step.\n"
-#~ "\n"
-#~ "When configuring your network, the available connections options are:\n"
-#~ "Normal modem connection, Winmodem connection, ISDN modem, ADSL "
-#~ "connection,\n"
-#~ "cable modem, and finally a simple LAN connection (Ethernet).\n"
-#~ "\n"
-#~ "We will not detail each configuration option - just make sure that you "
-#~ "have\n"
-#~ "all the parameters, such as IP address, default gateway, DNS servers, "
-#~ "etc.\n"
-#~ "from your Internet Service Provider or system administrator.\n"
-#~ "\n"
-#~ "About Winmodem Connection. Winmodems are special integrated low-end "
-#~ "modems\n"
-#~ "that require additional software to work compared to Normal modems. Some "
-#~ "of\n"
-#~ "those modems actually work under Mandriva Linux, some others do not. You\n"
-#~ "can consult the list of supported modems at LinModems.\n"
-#~ "\n"
-#~ "You can consult the ``Starter Guide'' chapter about Internet connections\n"
-#~ "for details about the configuration, or simply wait until your system is\n"
-#~ "installed and use the program described there to configure your "
-#~ "connection."
-#~ msgstr ""
-#~ "Ara configurareu la connexió a Internet/xarxa. Si voleu connectar\n"
-#~ "el vostre ordinador a Internet o a una xarxa local, feu clic a \"%s\".\n"
-#~ "Mandriva Linux intentarà detectar automàticament els dispositius\n"
-#~ "de xarxa i els mòdems. Si aquesta detecció falla, desactiveu la\n"
-#~ "casella \"%s\". També podeu decidir no configurar la xarxa, o\n"
-#~ "fer-ho més endavant; en aquest cas feu clic al botó \"%s\" per\n"
-#~ "passar al pas següent.\n"
-#~ "\n"
-#~ "En configurar la xarxa, les opcions de connexió disponibles són:\n"
-#~ "mòdem tradicional, winmodem, mòdem XDSI, connexió ADSL, mòdem de cable, "
-#~ "i\n"
-#~ "finalment una connexió LAN senzilla (Ethernet).\n"
-#~ "\n"
-#~ "No explicarem cada opció de configuració; només cal que us assegureu\n"
-#~ "que el vostre proveïdor d'Internet o administrador del sistema us ha\n"
-#~ "facilitat tots els paràmetres, com ara l'adreça IP, la passarel·la\n"
-#~ "per defecte, els servidors DNS, etc.\n"
-#~ "\n"
-#~ "En quant a les connexions amb winmodem. Els winmodems són mòdems "
-#~ "especials\n"
-#~ "integrats de gama baixa que necessiten programari addicional per "
-#~ "funcionar.\n"
-#~ "Alguns d'aquests mòdems funcionen a Mandriva Linux, i d'altres no. Podeu\n"
-#~ "consultar una llista de mòdems suportats a LinModems.\n"
-#~ "\n"
-#~ "Podeu consultar el capítol sobre connexions a Internet de la ``Guia\n"
-#~ "d'iniciació'' per conèixer els detalls de la configuració, o\n"
-#~ "simplement espereu fins que el sistema estigui instal·lat i\n"
-#~ "utilitzeu el programa que s'hi indica per configurar la connexió."
-
-#~ msgid "Use auto detection"
-#~ msgstr "Utilitza la detecció automàtica"
-
-#~ msgid ""
-#~ "\"%s\": clicking on the \"%s\" button will open the printer "
-#~ "configuration\n"
-#~ "wizard. Consult the corresponding chapter of the ``Starter Guide'' for "
-#~ "more\n"
-#~ "information on how to setup a new printer. The interface presented there "
-#~ "is\n"
-#~ "similar to the one used during installation."
-#~ msgstr ""
-#~ "\"%s\": feu clic al botó \"%s\" per obrir l'auxiliar de configuració de "
-#~ "la\n"
-#~ "impressora. Consulteu el capítol corresponent de la ``Guia d'iniciació'' "
-#~ "per\n"
-#~ "tenir més informació en quant a la configuració de noves impressores.\n"
-#~ "La interfície que apareix és similar a la que s'utilitza durant la "
-#~ "instal·lació."
-
-#~ msgid ""
-#~ "This dialog is used to choose which services you wish to start at boot\n"
-#~ "time.\n"
-#~ "\n"
-#~ "DrakX will list all the services available on the current installation.\n"
-#~ "Review each one carefully and uncheck those which are not needed at boot\n"
-#~ "time.\n"
-#~ "\n"
-#~ "A short explanatory text will be displayed about a service when it is\n"
-#~ "selected. However, if you are not sure whether a service is useful or "
-#~ "not,\n"
-#~ "it is safer to leave the default behavior.\n"
-#~ "\n"
-#~ "!! At this stage, be very careful if you intend to use your machine as a\n"
-#~ "server: you will probably not want to start any services that you do not\n"
-#~ "need. Please remember that several services can be dangerous if they are\n"
-#~ "enabled on a server. In general, select only the services you really "
-#~ "need.\n"
-#~ "!!"
-#~ msgstr ""
-#~ "En aquest diàleg escollireu els serveis que voleu que s'iniciïn durant "
-#~ "l'arrencada.\n"
-#~ "\n"
-#~ "DrakX farà una llista de tots els serveis disponibles en la instal·lació "
-#~ "actual.\n"
-#~ "Reviseu-los amb cura i desmarqueu aquells que no siguin necessaris durant "
-#~ "l'arrencada.\n"
-#~ "\n"
-#~ "Podeu obtenir una explicació breu sobre un servei si el seleccioneu. Si "
-#~ "no\n"
-#~ "esteu segur de la utilitat d'un servei, el més segur és deixar el "
-#~ "comportament\n"
-#~ "per defecte.\n"
-#~ "\n"
-#~ "AVÍS: Aneu especialment amb cura en aquest pas si penseu utilitzar "
-#~ "l'ordinador com\n"
-#~ "a servidor: segurament no voldreu iniciar serveis que no necessiteu.\n"
-#~ "Recordeu que hi ha diversos serveis que poden ser perillosos si "
-#~ "s'habiliten\n"
-#~ "en un servidor. En general, seleccioneu només els serveis que realment "
-#~ "necessiteu."
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-#~ "local time according to the time zone you selected. If the clock on your\n"
-#~ "motherboard is set to local time, you may deactivate this by unselecting\n"
-#~ "\"%s\", which will let GNU/Linux know that the system clock and the\n"
-#~ "hardware clock are in the same time zone. This is useful when the "
-#~ "machine\n"
-#~ "also hosts another operating system like Windows.\n"
-#~ "\n"
-#~ "The \"%s\" option will automatically regulate the clock by connecting to "
-#~ "a\n"
-#~ "remote time server on the Internet. For this feature to work, you must "
-#~ "have\n"
-#~ "a working Internet connection. It is best to choose a time server "
-#~ "located\n"
-#~ "near you. This option actually installs a time server that can be used "
-#~ "by\n"
-#~ "other machines on your local network as well."
-#~ msgstr ""
-#~ "GNU/Linux gestiona l'hora en GMT (Greenwich Mean Time) i el tradueix a\n"
-#~ "l'hora local d'acord amb la zona horària seleccionada. Si el rellotge de "
-#~ "la\n"
-#~ "placa base indica l'hora local, podeu desactivar-ho desseleccionant \"%s"
-#~ "\", i\n"
-#~ "això informarà a GNU/Linux que el rellotge del sistema i el rellotge del\n"
-#~ "maquinari són a la mateixa zona horària. Això és convenient quan la "
-#~ "màquina\n"
-#~ "també té instal·lat un altre sistema operatiu, com ara Windows.\n"
-#~ "\n"
-#~ "L'opció \"%s\" regularà automàticament l'hora connectant-se a un "
-#~ "servidor\n"
-#~ "horari remot d'Internet. Per tal que funcioni aquesta funció us caldrà "
-#~ "tenir\n"
-#~ "connexió a Internet. És millor triar un servidor que estigui ubicat a "
-#~ "prop\n"
-#~ "vostre. De fet, aquesta opció instal·la un servidor d'hora que altres "
-#~ "màquines\n"
-#~ "de la vostra xarxa local també podran utilitzar."
-
-#~ msgid ""
-#~ "Graphic Card\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "graphic card installed on your machine. If it is not the case, you can\n"
-#~ "choose from this list the card you actually have installed.\n"
-#~ "\n"
-#~ "   In the situation where different servers are available for your card,\n"
-#~ "with or without 3D acceleration, you are asked to choose the server that\n"
-#~ "best suits your needs."
-#~ msgstr ""
-#~ "Targeta gràfica\n"
-#~ "\n"
-#~ "   Normalment, l'instal·lador detectarà automàticament i configurarà la\n"
-#~ "targeta gràfica que tingueu instal·lada a l'ordinador. Si no fos així, "
-#~ "la\n"
-#~ "podeu seleccionar d'aquesta llista.\n"
-#~ "\n"
-#~ "   Cas que hi hagi diferents servidors per a la targeta, amb o sense\n"
-#~ "acceleració 3D, se us demanarà que trieu el servidor que us sigui\n"
-#~ "més convenient."
-
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-#~ "\n"
-#~ "You will be presented with a list of different parameters to change to "
-#~ "get\n"
-#~ "an optimal graphical display: Graphic Card\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "graphic card installed on your machine. If it is not the case, you can\n"
-#~ "choose from this list the card you actually have installed.\n"
-#~ "\n"
-#~ "   In the situation where different servers are available for your card,\n"
-#~ "with or without 3D acceleration, you are asked to choose the server that\n"
-#~ "best suits your needs.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Monitor\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "monitor connected to your machine. If it is incorrect, you can choose "
-#~ "from\n"
-#~ "this list the monitor you actually have connected to your computer.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Resolution\n"
-#~ "\n"
-#~ "   Here you can choose the resolutions and color depths available for "
-#~ "your\n"
-#~ "hardware. Choose the one that best suits your needs (you will be able to\n"
-#~ "change that after installation though). A sample of the chosen\n"
-#~ "configuration is shown in the monitor picture.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Test\n"
-#~ "\n"
-#~ "   Depending on your hardware, this entry might not appear.\n"
-#~ "\n"
-#~ "   the system will try to open a graphical screen at the desired\n"
-#~ "resolution. If you can see the message during the test and answer \"%s"
-#~ "\",\n"
-#~ "then DrakX will proceed to the next step. If you cannot see the message, "
-#~ "it\n"
-#~ "means that some part of the auto-detected configuration was incorrect "
-#~ "and\n"
-#~ "the test will automatically end after 12 seconds, bringing you back to "
-#~ "the\n"
-#~ "menu. Change settings until you get a correct graphical display.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Options\n"
-#~ "\n"
-#~ "   Here you can choose whether you want to have your machine "
-#~ "automatically\n"
-#~ "switch to a graphical interface at boot. Obviously, you want to check\n"
-#~ "\"%s\" if your machine is to act as a server, or if you were not "
-#~ "successful\n"
-#~ "in getting the display configured."
-#~ msgstr ""
-#~ "L'X (per sistema X Window) és el cor de la interfície gràfica de GNU/"
-#~ "Linux\n"
-#~ "de què depenen tots els entorns gràfics (KDE, GNOME, AfterStep, "
-#~ "WindowMaker,\n"
-#~ "etc.) que venen amb Mandriva Linux.\n"
-#~ "\n"
-#~ "Veureu una relació de diferents paràmetres que podeu canviar per "
-#~ "aconseguir\n"
-#~ "una visualització gràfica òptima: Targeta gràfica\n"
-#~ "\n"
-#~ "   Normalment, l'instal·lador detectarà i configurarà automàticament la\n"
-#~ "targeta gràfica instal·lada a l'ordinador. Si no fos així, podeu escollir "
-#~ "de\n"
-#~ "la llista la targeta que realment tingueu instal·lada.\n"
-#~ "\n"
-#~ "   En cas que hi hagi diferents servidors disponibles per a la vostra\n"
-#~ "targeta, amb o sense acceleració 3D, se us demanarà que escolliu el que\n"
-#~ "més us convingui.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Monitor\n"
-#~ "\n"
-#~ "   Normalment, l'instal·lador detectarà i configurarà automàticament el\n"
-#~ "monitor que teniu connectat a l'ordinador. Si no és correcte, podreu "
-#~ "triar\n"
-#~ "d'aquesta llista el monitor que realment teniu connectat a l'ordinador.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Resolució\n"
-#~ "\n"
-#~ "   Aquí podeu triar les resolucions i profunditats de color disponibles "
-#~ "per\n"
-#~ "al vostre maquinari. Trieu la que us vagi més bé (tot i que podreu\n"
-#~ "canviar-la després de la instal·lació). Al monitor veureu una mostra de "
-#~ "la\n"
-#~ "configuració triada.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Prova\n"
-#~ "\n"
-#~ "Depenent del maquinari aquesta entrada pot no aparèixer.\n"
-#~ "\n"
-#~ "   el sistema intentarà obrir una pantalla gràfica amb la resolució\n"
-#~ "desitjada. Si podeu veure el missatge durant la prova i responeu \"%s\",\n"
-#~ "DrakX passarà al pas següent. Si no el podeu veure, vol dir que la\n"
-#~ "configuració detectada automàticament no era del tot correcta i la prova\n"
-#~ "finalitzarà automàticament al cap de 12 segons, portant-vos de nou al "
-#~ "menú.\n"
-#~ "Canvieu els paràmetres fins que obtingueu una pantalla gràfica correcta.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Opcions\n"
-#~ "\n"
-#~ "   Aquí podeu decidir si voleu que l'ordinador canviï automàticament a "
-#~ "una\n"
-#~ "interfície gràfica en arrencar. Òbviament, voldreu activar \"%s\" si\n"
-#~ "l'ordinador ha d'actuar com a servidor, o si no heu aconseguit\n"
-#~ "configurar la pantalla."
-
-#~ msgid ""
-#~ "Monitor\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "monitor connected to your machine. If it is incorrect, you can choose "
-#~ "from\n"
-#~ "this list the monitor you actually have connected to your computer."
-#~ msgstr ""
-#~ "Monitor\n"
-#~ "\n"
-#~ "   Normalment, l'instal·lador detectarà i configurarà automàticament el\n"
-#~ "monitor que teniu connectat a l'ordinador. Si no és correcte, podreu "
-#~ "triar\n"
-#~ "d'aquesta llista el monitor que realment teniu connectat a l'ordinador."
-
-#~ msgid ""
-#~ "Resolution\n"
-#~ "\n"
-#~ "   Here you can choose the resolutions and color depths available for "
-#~ "your\n"
-#~ "hardware. Choose the one that best suits your needs (you will be able to\n"
-#~ "change that after installation though). A sample of the chosen\n"
-#~ "configuration is shown in the monitor picture."
-#~ msgstr ""
-#~ "Resolució\n"
-#~ "\n"
-#~ "   Aquí podeu triar les resolucions i profunditats de color disponibles "
-#~ "per\n"
-#~ "al vostre maquinari. Trieu la que us vagi més bé (tot i que podreu\n"
-#~ "canviar-la després de la instal·lació). Al monitor veureu una mostra de "
-#~ "la\n"
-#~ "configuració triada."
-
-#~ msgid ""
-#~ "In the situation where different servers are available for your card, "
-#~ "with\n"
-#~ "or without 3D acceleration, you are asked to choose the server that best\n"
-#~ "suits your needs."
-#~ msgstr ""
-#~ "En cas que hi hagi diferents servidors disponibles per a la vostra\n"
-#~ "targeta, amb o sense acceleració 3D, se us demanarà que escolliu\n"
-#~ "el servidor que més us convingui."
-
-#~ msgid ""
-#~ "Options\n"
-#~ "\n"
-#~ "   Here you can choose whether you want to have your machine "
-#~ "automatically\n"
-#~ "switch to a graphical interface at boot. Obviously, you want to check\n"
-#~ "\"%s\" if your machine is to act as a server, or if you were not "
-#~ "successful\n"
-#~ "in getting the display configured."
-#~ msgstr ""
-#~ "Opcions\n"
-#~ "\n"
-#~ "   Aquí podeu decidir si voleu que l'ordinador canviï automàticament a "
-#~ "una\n"
-#~ "interfície gràfica en arrencar. Òbviament, activareu \"%s\" si "
-#~ "l'ordinador ha\n"
-#~ "de ser un servidor, o si no heu pogut configurar la pantalla."
-
-#~ msgid ""
-#~ "At this point, you need to decide where you want to install the Mandrake\n"
-#~ "Linux operating system on your hard drive. If your hard drive is empty "
-#~ "or\n"
-#~ "if an existing operating system is using all the available space you "
-#~ "will\n"
-#~ "have to partition the drive. Basically, partitioning a hard drive "
-#~ "consists\n"
-#~ "of logically dividing it to create the space needed to install your new\n"
-#~ "Mandriva Linux system.\n"
-#~ "\n"
-#~ "Because the process of partitioning a hard drive is usually irreversible\n"
-#~ "and can lead to lost data if there is an existing operating system "
-#~ "already\n"
-#~ "installed on the drive, partitioning can be intimidating and stressful "
-#~ "if\n"
-#~ "you are an inexperienced user. Fortunately, DrakX includes a wizard "
-#~ "which\n"
-#~ "simplifies this process. Before continuing with this step, read through "
-#~ "the\n"
-#~ "rest of this section and above all, take your time.\n"
-#~ "\n"
-#~ "Depending on your hard drive configuration, several options are "
-#~ "available:\n"
-#~ "\n"
-#~ " * \"%s\": this option will perform an automatic partitioning of your "
-#~ "blank\n"
-#~ "drive(s). If you use this option there will be no further prompts.\n"
-#~ "\n"
-#~ " * \"%s\": the wizard has detected one or more existing Linux partitions "
-#~ "on\n"
-#~ "your hard drive. If you want to use them, choose this option. You will "
-#~ "then\n"
-#~ "be asked to choose the mount points associated with each of the "
-#~ "partitions.\n"
-#~ "The legacy mount points are selected by default, and for the most part "
-#~ "it's\n"
-#~ "a good idea to keep them.\n"
-#~ "\n"
-#~ " * \"%s\": if Microsoft Windows is installed on your hard drive and "
-#~ "takes\n"
-#~ "all the space available on it, you will have to create free space for\n"
-#~ "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-#~ "data (see ``Erase entire disk'' solution) or resize your Microsoft "
-#~ "Windows\n"
-#~ "FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-#~ "data, provided you have previously defragmented the Windows partition.\n"
-#~ "Backing up your data is strongly recommended.. Using this option is\n"
-#~ "recommended if you want to use both Mandriva Linux and Microsoft Windows "
-#~ "on\n"
-#~ "the same computer.\n"
-#~ "\n"
-#~ "   Before choosing this option, please understand that after this\n"
-#~ "procedure, the size of your Microsoft Windows partition will be smaller\n"
-#~ "then when you started. You will have less free space under Microsoft\n"
-#~ "Windows to store your data or to install new software.\n"
-#~ "\n"
-#~ " * \"%s\": if you want to delete all data and all partitions present on\n"
-#~ "your hard drive and replace them with your new Mandriva Linux system,\n"
-#~ "choose this option. Be careful, because you will not be able to undo "
-#~ "your\n"
-#~ "choice after you confirm.\n"
-#~ "\n"
-#~ "   !! If you choose this option, all data on your disk will be "
-#~ "deleted. !!\n"
-#~ "\n"
-#~ " * \"%s\": this will simply erase everything on the drive and begin "
-#~ "fresh,\n"
-#~ "partitioning everything from scratch. All data on your disk will be "
-#~ "lost.\n"
-#~ "\n"
-#~ "   !! If you choose this option, all data on your disk will be lost. !!\n"
-#~ "\n"
-#~ " * \"%s\": choose this option if you want to manually partition your "
-#~ "hard\n"
-#~ "drive. Be careful -- it is a powerful but dangerous choice and you can "
-#~ "very\n"
-#~ "easily lose all your data. That's why this option is really only\n"
-#~ "recommended if you have done something like this before and have some\n"
-#~ "experience. For more instructions on how to use the DiskDrake utility,\n"
-#~ "refer to the ``Managing Your Partitions'' section in the ``Starter "
-#~ "Guide''."
-#~ msgstr ""
-#~ "Ara és quan heu de decidir en quin lloc del vostre disc dur voleu "
-#~ "instal·lar\n"
-#~ "el sistema operatiu Mandriva Linux. Si el disc és buit, o si un sistema\n"
-#~ "operatiu existent n'utilitza tot l'espai disponible, us caldrà \n"
-#~ "particionar-lo. Bàsicament, particionar un disc dur consisteix a dividir-"
-#~ "lo de\n"
-#~ "manera lògica per crear espai on instal·lar el nou sistema Mandriva "
-#~ "Linux.\n"
-#~ "\n"
-#~ "Atès que els efectes d'aquest procés solen ser irreversibles i poden\n"
-#~ "implicar pèrdua de dades si ja teniu un sistema operatiu instal·lat, el\n"
-#~ "particionament us pot espantar si sou un usuari sense experiència. Per "
-#~ "sort,\n"
-#~ "DrakX inclou un auxiliar que simplifica aquest procés. Abans de\n"
-#~ "continuar, però, llegiu la resta d'aquesta secció i, sobre tot, preneu-"
-#~ "vos\n"
-#~ "el temps que calgui.\n"
-#~ "\n"
-#~ "Segons la configuració del vostre disc dur, hi ha diverses opcions "
-#~ "possibles:\n"
-#~ "\n"
-#~ " * \"%s\": aquesta opció particionarà automàticament les unitats buides.\n"
-#~ "Amb aquesta opció no se us preguntarà res més.\n"
-#~ "\n"
-#~ " * \"%s\": l'auxiliar ha detectat una o més particions de Linux al "
-#~ "vostre\n"
-#~ "disc dur. Si voleu utilitzar-les, escolliu aquesta opció. Se us demanarà "
-#~ "que\n"
-#~ "trieu els punts de muntatge associats a cadascuna de les particions. Els\n"
-#~ "punts de muntatge existents se seleccionen per defecte, i en la majoria "
-#~ "dels\n"
-#~ "casos és bona idea conservar-los.\n"
-#~ "\n"
-#~ " * \"%s\" Si teniu el Microsoft Windows instal·lat al disc dur i n'ocupa "
-#~ "tot\n"
-#~ "l'espai disponible, caldrà crear-hi espai lliure per a GNU/Linux. Per fer-"
-#~ "ho,\n"
-#~ "podeu suprimir la partició i les dades del Windows (consulteu la solució\n"
-#~ "``Esborrar completament el disc\") o canviar la mida de la partició FAT "
-#~ "o\n"
-#~ "NTFS de Windows. Aquest canvi de mida es pot dur a terme sense cap pèrdua "
-#~ "de\n"
-#~ "daDES, sempre que la partició de Windows hagi estat desfragmentada\n"
-#~ "prèviament. És molt recomenable, fer una còpia de seguretat de les "
-#~ "dades.\n"
-#~ "Aquesta opció és la més recomanable si voleu utilitzar tant Mandriva "
-#~ "Linux\n"
-#~ "com Microsoft Windows al mateix ordinador.\n"
-#~ "\n"
-#~ "  Abans de decidir-vos per aquesta opció, penseu que en acabar la "
-#~ "partició\n"
-#~ "de Microsoft Windows serà més petita que anteriorment. Tindreu menys "
-#~ "espai\n"
-#~ "lliure a Microsoft Windows per emmagatzemar-hi dades o instal·lar-hi més "
-#~ "programari.\n"
-#~ "\n"
-#~ " *\"%s\": si voleu suprimir totes les dades i particions que teniu al "
-#~ "disc\n"
-#~ "dur i substituir-les pel sistema Mandriva Linux, podeu escollir aquesta\n"
-#~ "opció. Aneu amb compte, però, perquè, un cop la confirmeu, no podreu fer-"
-#~ "vos enrere.\n"
-#~ "\n"
-#~ "   ¡¡ Si trieu aquesta opció, totes les dades del disc s'esborraran !!.\n"
-#~ "\n"
-#~ " *\"%s\": aquesta opció simplement esborra tot el contingut del disc i\n"
-#~ "comença de nou, particionant des de zero. Totes les dades del disc es "
-#~ "perdran.\n"
-#~ "\n"
-#~ "   ¡¡ Si trieu aquesta opció, totes les dades del disc s'esborraran !!.\n"
-#~ "\n"
-#~ " * \"%s\": si voleu particionar el disc dur manualment, podeu triar "
-#~ "aquesta\n"
-#~ "opció. Aneu amb compte: és una opció molt potent però també perillosa, "
-#~ "ja\n"
-#~ "que podeu perdre fàcilment totes les dades. Per tant, aquesta opció només "
-#~ "és\n"
-#~ "recomenable si heu fet abans alguna cosa similar i teniu una mica\n"
-#~ "d'experiència. Trobareu més instruccions sobre la utilitat DiskDrake a "
-#~ "la\n"
-#~ "secció ``Gestió de les particions'' de la ``Guia d'iniciació''."
-
-#~ msgid ""
-#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
-#~ "ready to use. Just click \"%s\" to reboot the system. Do not forget to\n"
-#~ "remove the installation media (CD-ROM or floppy). The first thing you\n"
-#~ "should see after your computer has finished doing its hardware tests is "
-#~ "the\n"
-#~ "bootloader menu, giving you the choice of which operating system to "
-#~ "start.\n"
-#~ "\n"
-#~ "The \"%s\" button shows two more buttons to:\n"
-#~ "\n"
-#~ " * \"%s\": to create an installation floppy disk that will automatically\n"
-#~ "perform a whole installation without the help of an operator, similar to\n"
-#~ "the installation you just configured.\n"
-#~ "\n"
-#~ "   Note that two different options are available after clicking the "
-#~ "button:\n"
-#~ "\n"
-#~ "    * \"%s\". This is a partially automated installation. The "
-#~ "partitioning\n"
-#~ "step is the only interactive procedure.\n"
-#~ "\n"
-#~ "    * \"%s\". Fully automated installation: the hard disk is completely\n"
-#~ "rewritten, all data is lost.\n"
-#~ "\n"
-#~ "   This feature is very handy when installing a number of similar "
-#~ "machines.\n"
-#~ "See the Auto install section on our web site for more information.\n"
-#~ "\n"
-#~ " * \"%s\": saves a list of the packages selected in this installation. "
-#~ "To\n"
-#~ "use this selection with another installation, insert the floppy and "
-#~ "start\n"
-#~ "the installation. At the prompt, press the [F1] key and type >>linux\n"
-#~ "defcfg=\"floppy\" <<."
-#~ msgstr ""
-#~ "Ja ho teniu. S'ha completat la instal·lació i el vostre sistema GNU/"
-#~ "Linux\n"
-#~ "està preparat per fer-se servir. Simplement premeu \"%s\" per reiniciar "
-#~ "el\n"
-#~ "sistema. No oblideu treure la font d'instal·lació (CD-ROM o disquet).\n"
-#~ "La primera cosa que veureu, després que l'ordinador hagi finalitzat les\n"
-#~ "comprovacions de maquinari, és el menú del carregador d'arrencada, que "
-#~ "us\n"
-#~ "deixa triar el sistema operatiu amb què voleu iniciar.\n"
-#~ "\n"
-#~ "El botó \"%s\" mostra dos botons més per:\n"
-#~ "\n"
-#~ " * \"%s\": per crear un disquet d'instal·lació que realitzarà "
-#~ "automàticament\n"
-#~ "una instal·lació completa sense l'ajuda d'un operador, semblant a la\n"
-#~ "instal·lació que acabeu de configurar.\n"
-#~ "\n"
-#~ "   Tingueu en compte que hi ha dues opcions diferents després de fer clic "
-#~ "al botó:\n"
-#~ "\n"
-#~ "    * \"%s\". Aquesta és una instal·lació parcialment automatitzada; el "
-#~ "pas\n"
-#~ "de particionament és l'únic procediment interactiu.\n"
-#~ "\n"
-#~ "    * \"%s\". Instal·lació completament automatitzada: el disc dur es\n"
-#~ "reescriu completament i totes les dades es perden.\n"
-#~ "\n"
-#~ "   Aquesta característica és força útil quan es fa una instal·lació a un\n"
-#~ "cert nombre d'ordinadors similars. En trobareu més informació a la "
-#~ "secció\n"
-#~ "d'instal·lació automàtica del nostre lloc web.\n"
-#~ "\n"
-#~ " * \"%s\": desa una llista dels paquets seleccionats en aquesta\n"
-#~ "instal·lació. Per utilitzar aquesta selecció en una altra instal·lació,\n"
-#~ "inseriu el disquet i inicieu la instal·lació. A l'indicador, premeu la "
-#~ "tecla\n"
-#~ "F1, i escriviu >>linux defcfg=\"floppy\"<<."
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for use\n"
-#~ "(formatting means creating a file system).\n"
-#~ "\n"
-#~ "At this time, you may wish to reformat some already existing partitions "
-#~ "to\n"
-#~ "erase any data they contain. If you wish to do that, please select those\n"
-#~ "partitions as well.\n"
-#~ "\n"
-#~ "Please note that it is not necessary to reformat all pre-existing\n"
-#~ "partitions. You must reformat the partitions containing the operating\n"
-#~ "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-#~ "reformat partitions containing data that you wish to keep (typically\n"
-#~ "\"/home\").\n"
-#~ "\n"
-#~ "Please be careful when selecting partitions. After formatting, all data "
-#~ "on\n"
-#~ "the selected partitions will be deleted and you will not be able to "
-#~ "recover\n"
-#~ "it.\n"
-#~ "\n"
-#~ "Click on \"%s\" when you are ready to format the partitions.\n"
-#~ "\n"
-#~ "Click on \"%s\" if you want to choose another partition for your new\n"
-#~ "Mandriva Linux operating system installation.\n"
-#~ "\n"
-#~ "Click on \"%s\" if you wish to select partitions that will be checked "
-#~ "for\n"
-#~ "bad blocks on the disk."
-#~ msgstr ""
-#~ "Per poder utilitzar les particions que s'acaben de definir cal formatar-"
-#~ "les\n"
-#~ "(la formatació consisteix a crear-hi un sistema de fitxers).\n"
-#~ "\n"
-#~ "En aquest punt, potser voldreu tornar a formatar algunes de les "
-#~ "particions\n"
-#~ "existents per eliminar les dades que contenen. Si és així, seleccioneu\n"
-#~ "també aquestes particions.\n"
-#~ "\n"
-#~ "Tingueu en compte que no cal tornar a formatar totes les particions que "
-#~ "ja\n"
-#~ "existien; heu de tornar a formatar les particions que continguin el "
-#~ "sistema\n"
-#~ "operatiu (com ara \"/\", \"/usr\" o \"/var\"), però no les que contenen\n"
-#~ "dades que voleu conservar (habitualment, \"/home\").\n"
-#~ "\n"
-#~ "Aneu amb compte en seleccionar les particions; després de la formatació,\n"
-#~ "totes les dades s'hauran suprimit i no en podreu recuperar cap.\n"
-#~ "\n"
-#~ "Feu clic a \"%s\" quan estigueu a punt per formatar les particions.\n"
-#~ "\n"
-#~ "Feu clic a \"%s\" si voleu seleccionar una altra partició per instal·lar\n"
-#~ "el nou sistema Mandriva Linux.\n"
-#~ "\n"
-#~ "Feu clic a \"%s\" si voleu seleccionar particions on cercar-hi blocs "
-#~ "defectuosos."
-
-#~ msgid ""
-#~ "At the time you are installing Mandriva Linux, it is likely that some\n"
-#~ "packages will have been updated since the initial release. Bugs may have\n"
-#~ "been fixed, security issues resolved. To allow you to benefit from these\n"
-#~ "updates, you are now able to download them from the Internet. Check \"%s"
-#~ "\"\n"
-#~ "if you have a working Internet connection, or \"%s\" if you prefer to\n"
-#~ "install updated packages later.\n"
-#~ "\n"
-#~ "Choosing \"%s\" will display a list of places from which updates can be\n"
-#~ "retrieved. You should choose one near to you. A package-selection tree "
-#~ "will\n"
-#~ "appear: review the selection, and press \"%s\" to retrieve and install "
-#~ "the\n"
-#~ "selected package(s), or \"%s\" to abort."
-#~ msgstr ""
-#~ "Ara esteu instal·lant Mandriva Linux, és probable que alguns paquets\n"
-#~ "hagin estat actualitzats desde la data de llançament. Alguns errors "
-#~ "poden\n"
-#~ "haver estat resolts, i altres problemes de seguretat poden estar ja "
-#~ "corregits.\n"
-#~ "Per beneficiar-vos d'aquestes actualitzacions, les podeu baixar "
-#~ "d'Internet.\n"
-#~ "Trieu \"%s\" si teniu una connexió a Internet operativa, o \"%s\" si "
-#~ "preferiu\n"
-#~ "instal·lar-les més tard.\n"
-#~ "\n"
-#~ "Si trieu \"%s\" apareixerà una llista de llocs des d'on podeu baixar les\n"
-#~ "actualitzacions. Escolliu la ubicació més propera. Aleshores, apareixerà\n"
-#~ "un arbre de selecció de paquets: comproveu la selecció i premeu \"%s\" "
-#~ "per\n"
-#~ "baixar i instal·lar els paquets seleccionats, o \"%s\" per abandonar."
-
-#~ msgid ""
-#~ "At this point, DrakX will allow you to choose the security level desired\n"
-#~ "for the machine. As a rule of thumb, the security level should be set\n"
-#~ "higher if the machine will contain crucial data, or if it will be a "
-#~ "machine\n"
-#~ "directly exposed to the Internet. The trade-off of a higher security "
-#~ "level\n"
-#~ "is generally obtained at the expense of ease of use.\n"
-#~ "\n"
-#~ "If you do not know what to choose, stay with the default option. You "
-#~ "will\n"
-#~ "be able to change that security level later with tool draksec from the\n"
-#~ "Mandrake Control Center.\n"
-#~ "\n"
-#~ "The \"%s\" field can inform the system of the user on this computer who\n"
-#~ "will be responsible for security. Security messages will be sent to that\n"
-#~ "address."
-#~ msgstr ""
-#~ "Ara és el moment de triar el nivell de seguretat desitjat per a la "
-#~ "màquina.\n"
-#~ "Com a norma general, el nivell de seguretat ha de ser més alt si la "
-#~ "màquina\n"
-#~ "conté dades importants, o si està connectada directament a Internet.\n"
-#~ "Tanmateix, un nivell alt de seguretat sovint comporta una disminució de "
-#~ "la\n"
-#~ "facilitat d'ús.\n"
-#~ "\n"
-#~ "Si no sabeu quin escollir, deixeu l'opció per defecte.. Podreu canviar\n"
-#~ "el nivell de seguretat més tard amb l'eina draksec del\n"
-#~ "Centre de Control Mandriva Linux.\n"
-#~ "\n"
-#~ "El camp \"%s\" pot informar l'usuari del sistema qui serà el responsable\n"
-#~ "de la seguretat. Els missatges de seguretat s'enviaran a aquesta adreça."
-
-#~ msgid ""
-#~ "\"%s\": check the current country selection. If you are not in this\n"
-#~ "country, click on the \"%s\" button and choose another one. If your "
-#~ "country\n"
-#~ "is not in the first list shown, click the \"%s\" button to get the "
-#~ "complete\n"
-#~ "country list."
-#~ msgstr ""
-#~ "\"%s\": comproveu que la selecció del país és correcta. Si no sou a\n"
-#~ "aquest país, feu clic al botó \"%s\" i seleccioneu-ne un altre.\n"
-#~ "Si el vostre país no és a la primera llista, feu clic al botó \"%s\" per\n"
-#~ "obtenir una llista de països completa."
-
-#~ msgid ""
-#~ "This step is activated only if an existing GNU/Linux partition has been\n"
-#~ "found on your machine.\n"
-#~ "\n"
-#~ "DrakX now needs to know if you want to perform a new install or an "
-#~ "upgrade\n"
-#~ "of an existing Mandriva Linux system:\n"
-#~ "\n"
-#~ " * \"%s\": For the most part, this completely wipes out the old system. "
-#~ "If\n"
-#~ "you wish to change how your hard drives are partitioned, or change the "
-#~ "file\n"
-#~ "system, you should use this option. However, depending on your "
-#~ "partitioning\n"
-#~ "scheme, you can prevent some of your existing data from being over-"
-#~ "written.\n"
-#~ "\n"
-#~ " * \"%s\": this installation class allows you to update the packages\n"
-#~ "currently installed on your Mandriva Linux system. Your current\n"
-#~ "partitioning scheme and user data is not altered. Most of other\n"
-#~ "configuration steps remain available, similar to a standard "
-#~ "installation.\n"
-#~ "\n"
-#~ "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-#~ "running version \"8.1\" or later. Performing an Upgrade on versions "
-#~ "prior\n"
-#~ "to Mandriva Linux version \"8.1\" is not recommended."
-#~ msgstr ""
-#~ "Aquest pas només s'activa si s'ha trobat una partició GNU/Linux antiga\n"
-#~ "al vostre ordinador.\n"
-#~ "\n"
-#~ "DrakX necessita saber si voleu realitzar una instal·lació nova o\n"
-#~ "una actualització d'un sistema Mandriva Linux existent:\n"
-#~ "\n"
-#~ " * \"%s\": aquesta opció destrueix gairebé del tot el sistema antic. Si\n"
-#~ "voleu canviar les particions dels discs durs, o el sistema de fitxers,\n"
-#~ "heu d'utilitzar aquesta opció. No obstant això, i depenent de l'esquema "
-#~ "de\n"
-#~ "particionament que tingueu, podeu evitar que part de les dades existents "
-#~ "se\n"
-#~ "sobreescriguin.\n"
-#~ "\n"
-#~ " * \"%s\": aquest tipus d'instal·lació us permet actualitzar els paquets "
-#~ "que\n"
-#~ "ja estan instal·lats al sistema Mandriva Linux. L'esquema de "
-#~ "particionament\n"
-#~ "actual i les dades d'usuari no queden afectades. La majoria de les "
-#~ "altres\n"
-#~ "fases de configuració queden disponibles, de manera similar a una\n"
-#~ "instal·lació estàndard.\n"
-#~ "\n"
-#~ "L'opció “Actualitza” ha de funcionar correctament en sistemes Mandriva "
-#~ "Linux\n"
-#~ "amb la versió \"8.1\" o posteriors. No es recomana realitzar una\n"
-#~ "actualització en versions de Mandriva Linux anteriors a la \"8.1\"."
-
-#~ msgid ""
-#~ "Depending on the language you chose in section , DrakX will "
-#~ "automatically\n"
-#~ "select a particular type of keyboard configuration. Check that the\n"
-#~ "selection suits you or choose another keyboard layout.\n"
-#~ "\n"
-#~ "Also, you may not have a keyboard that corresponds exactly to your\n"
-#~ "language: for example, if you are an English-speaking Swiss native, you "
-#~ "may\n"
-#~ "have a Swiss keyboard. Or if you speak English and are located in "
-#~ "Quebec,\n"
-#~ "you may find yourself in the same situation where your native language "
-#~ "and\n"
-#~ "country-set keyboard do not match. In either case, this installation "
-#~ "step\n"
-#~ "will allow you to select an appropriate keyboard from a list.\n"
-#~ "\n"
-#~ "Click on the \"%s\" button to be presented with the complete list of\n"
-#~ "supported keyboards.\n"
-#~ "\n"
-#~ "If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-#~ "dialog will allow you to choose the key binding that will switch the\n"
-#~ "keyboard between the Latin and non-Latin layouts."
-#~ msgstr ""
-#~ "DrakX seleccionarà automàticament la configuració de teclat correcta\n"
-#~ "segons l'idioma que hagueu escollit a Secció. Comproveu que la selecció\n"
-#~ "us vagi bé o escolliu una altra configuració de teclat.\n"
-#~ "\n"
-#~ "Tanmateix, pot ser que tingueu un teclat que no correspongués exactament "
-#~ "al\n"
-#~ "vostre idioma: per exemple, si sou un suís que parla anglès, potser teniu "
-#~ "un\n"
-#~ "teclat suís. O, si parleu anglès però viviu al Quebec, us podeu trobar en "
-#~ "la\n"
-#~ "mateixa situació i el vostre teclat no coincidirà amb el vostre idioma. "
-#~ "En\n"
-#~ "tots dos casos, aquesta fase de la instal·lació us permetrà triar un "
-#~ "teclat\n"
-#~ "adequat d'una llista.\n"
-#~ "\n"
-#~ "Feu clic al botó \"%s\" per veure la llista completa de teclats "
-#~ "disponibles.\n"
-#~ "\n"
-#~ "Si trieu una disposició de teclat basada en un alfabet no llatí, el "
-#~ "diàleg\n"
-#~ "següent us permetrà escollir la tecla que servirà per canviar entre les\n"
-#~ "configuracions llatina i no llatina."
-
-#~ msgid ""
-#~ "Your choice of preferred language will affect the language of the\n"
-#~ "documentation, the installer and the system in general. Select first the\n"
-#~ "region you are located in, and then the language you speak.\n"
-#~ "\n"
-#~ "Clicking on the \"%s\" button will allow you to select other languages "
-#~ "to\n"
-#~ "be installed on your workstation, thereby installing the language-"
-#~ "specific\n"
-#~ "files for system documentation and applications. For example, if you "
-#~ "will\n"
-#~ "host users from Spain on your machine, select English as the default\n"
-#~ "language in the tree view and \"%s\" in the Advanced section.\n"
-#~ "\n"
-#~ "About UTF-8 (unicode) support: Unicode is a new character encoding meant "
-#~ "to\n"
-#~ "cover all existing languages. Though full support for it in GNU/Linux is\n"
-#~ "still under development. For that reason, Mandriva Linux will be using "
-#~ "it\n"
-#~ "or not depending on the user choices:\n"
-#~ "\n"
-#~ " * If you choose a languages with a strong legacy encoding (latin1\n"
-#~ "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, "
-#~ "most\n"
-#~ "iso-8859-2 languages), the legacy encoding will be used by default;\n"
-#~ "\n"
-#~ " * Other languages will use unicode by default;\n"
-#~ "\n"
-#~ " * If two or more languages are required, and those languages are not "
-#~ "using\n"
-#~ "the same encoding, then unicode will be used for the whole system;\n"
-#~ "\n"
-#~ " * Finally, unicode can also be forced for the system at user request by\n"
-#~ "selecting option \"%s\" independently of which language(s) have been\n"
-#~ "chosen.\n"
-#~ "\n"
-#~ "Note that you're not limited to choosing a single additional language. "
-#~ "You\n"
-#~ "may choose several ones, or even install them all by selecting the \"%s"
-#~ "\"\n"
-#~ "box. Selecting support for a language means translations, fonts, spell\n"
-#~ "checkers, etc. for that language will also be installed.\n"
-#~ "\n"
-#~ "To switch between the various languages installed on the system, you can\n"
-#~ "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-#~ "language used by the entire system. Running the command as a regular "
-#~ "user\n"
-#~ "will only change the language settings for that particular user."
-#~ msgstr ""
-#~ "L'idioma preferit que trieu afectarà a l'idioma de la documentació,\n"
-#~ "l'instal·lador i a tot el sistema en general. Seleccioneu primer la\n"
-#~ "regió on us trobeu i després l'idioma que parleu.\n"
-#~ "\n"
-#~ "Si feu clic al botó \"%s\" podreu seleccionar altres idiomes que vulgueu\n"
-#~ "instal·lar a la vostra estació de treball. S'instal·laran els fitxers\n"
-#~ "d'idioma específics de la documentació i de les aplicacions. Per "
-#~ "exemple,\n"
-#~ "si heu de tenir usuaris espanyols a l'ordinador, podeu triar l'anglès com "
-#~ "a\n"
-#~ "idioma per defecte a la vista d'arbre i marcar \"%s\" a la secció "
-#~ "Avançat.\n"
-#~ "\n"
-#~ "En quant al suport UTF-8 (unicode): Unicode és una nova codificació de\n"
-#~ "caràcters que cobreix tots els idiomes existents. El suport complet a\n"
-#~ "GNU/Linux encara està sota desenvolupament. Per aquesta raó, Mandriva "
-#~ "Linux\n"
-#~ "l'usarà o no depenent de les opcions que esculli l'usuari:\n"
-#~ "\n"
-#~ " * Si escolliu un idioma amb una codificació existent forta(idiomes\n"
-#~ "llatins, rus, japonès, xinès, coreà, thai, grec, turc, la majoria dels\n"
-#~ "idiomes iso-8859-2), la codificació existent s'usarà per defecte;\n"
-#~ "\n"
-#~ " * La resta d'idiomes usaran unicode per defecte;\n"
-#~ "\n"
-#~ " * Si s'instal·len dos o més idiomes i aquests idiomes no usen la "
-#~ "mateixa\n"
-#~ "codificació, llavors s'usarà unicode per tot el sistema;\n"
-#~ "\n"
-#~ " * Finalment, es pot forçar l'ús de unicode si s'escull la opció\"%s\"\n"
-#~ "independentment dels idiomes escollits.\n"
-#~ "\n"
-#~ "Noteu que no esteu limitats a escollir només un idioma addicional. Podeu\n"
-#~ "triar diversos idiomes addicionals, i fins i tot instal·lar-los tots\n"
-#~ "activant la casella \"%s\". Si habiliteu un idioma esteu instal·lant les\n"
-#~ "traduccions, els tipus de lletra, els verificadors ortogràfics, etc. "
-#~ "d'aquest idioma.\n"
-#~ "\n"
-#~ "Per passar d'un dels idiomes a un altre, podeu executar com a \"root\"\n"
-#~ "l'ordre \"/usr/sbin/localedrake\" per canviar l'idioma de tot el sistema. "
-#~ "Si\n"
-#~ "l'executeu com a usuari normal, només es canviarà l'idioma d'aquest\n"
-#~ "usuari concret."
-
-#~ msgid ""
-#~ "Usually, DrakX has no problems detecting the number of buttons on your\n"
-#~ "mouse. If it does, it assumes you have a two-button mouse and will\n"
-#~ "configure it for third-button emulation. The third-button mouse button of "
-#~ "a\n"
-#~ "two-button mouse can be ``pressed'' by simultaneously clicking the left "
-#~ "and\n"
-#~ "right mouse buttons. DrakX will automatically know whether your mouse "
-#~ "uses\n"
-#~ "a PS/2, serial or USB interface.\n"
-#~ "\n"
-#~ "In case you have a 3 buttons mouse without wheel, you can choose the "
-#~ "mouse\n"
-#~ "that says \"%s\". DrakX will then configure your mouse so that you can\n"
-#~ "simulate the wheel with it: to do so, press the middle button and move "
-#~ "your\n"
-#~ "mouse up and down.\n"
-#~ "\n"
-#~ "If for some reason you wish to specify a different type of mouse, select "
-#~ "it\n"
-#~ "from the list provided.\n"
-#~ "\n"
-#~ "If you choose a mouse other than the default, a test screen will be\n"
-#~ "displayed. Use the buttons and wheel to verify that the settings are\n"
-#~ "correct and that the mouse is working correctly. If the mouse is not\n"
-#~ "working well, press the space bar or [Return] key to cancel the test and "
-#~ "to\n"
-#~ "go back to the list of choices.\n"
-#~ "\n"
-#~ "Wheel mice are occasionally not detected automatically, so you will need "
-#~ "to\n"
-#~ "select your mouse from a list. Be sure to select the one corresponding "
-#~ "to\n"
-#~ "the port that your mouse is attached to. After selecting a mouse and\n"
-#~ "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
-#~ "the mouse wheel to ensure that it is activated correctly. Once you see "
-#~ "the\n"
-#~ "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
-#~ "buttons and check that the mouse pointer moves on-screen as you move "
-#~ "your\n"
-#~ "mouse."
-#~ msgstr ""
-#~ "DrakX generalment detecta el nombre de botons que té el vostre ratolí.\n"
-#~ "Si no pot, assumeix que teniu un ratolí de dos botons i el configurarà "
-#~ "per\n"
-#~ "emular el tercer botó. Es pot ``prémer' ' el tercer botó d'un ratolí de "
-#~ "dos\n"
-#~ "botons fent clic simultàniament als botons dret i esquerre. DrakX\n"
-#~ "detectarà automàticament si el ratolí utilitza la interfície PS/2, sèrie "
-#~ "o USB.\n"
-#~ "\n"
-#~ "En cas que tingueu un ratolí de 3 botons sense rodeta, podeu escollir\n"
-#~ "\"%s\". DrakX configurarà el ratolí per tal de simular la rodeta,\n"
-#~ "per fer-ho premeu el botó central i moveu el ratolí a dalt i a baix.\n"
-#~ "\n"
-#~ "Si per alguna raó voleu especificar un altre tipus de ratolí,\n"
-#~ "seleccioneu-lo a la llista.\n"
-#~ "\n"
-#~ "Si escolliu un ratolí diferent del ratolí per defecte, es mostrarà una\n"
-#~ "pantalla de prova. Utilitzeu els botons i la roda per verificar que la\n"
-#~ "configuració és correcta i que el ratolí funciona bé. Si el ratolí no\n"
-#~ "funciona bé, premeu la barra d'espai o la tecla [Intro] per cancel·lar "
-#~ "la\n"
-#~ "prova i tornar a la llista.\n"
-#~ "\n"
-#~ "De vegaDES, la roda del ratolí no es detecta automàticament. En aquest "
-#~ "cas,\n"
-#~ "haureu de seleccionar-lo a la llista. Assegureu-vos de triar el que\n"
-#~ "correspon al port a què esta connectat el ratolí. Després de seleccionar "
-#~ "un\n"
-#~ "ratolí i prémer el botó \"%s\", a la pantalla apareixerà un ratolí. "
-#~ "Mogueu la\n"
-#~ "roda del ratolí per assegurar-vos que s'ha activat correctament, "
-#~ "comprovant\n"
-#~ "que es mou també a la pantalla; després comproveu els botons i que el "
-#~ "cursor\n"
-#~ "de la pantalla es mou quan moveu el ratolí."
-
-#~ msgid ""
-#~ "This is the most crucial decision point for the security of your GNU/"
-#~ "Linux\n"
-#~ "system: you have to enter the \"root\" password. \"Root\" is the system\n"
-#~ "administrator and is the only user authorized to make updates, add "
-#~ "users,\n"
-#~ "change the overall system configuration, and so on. In short, \"root\" "
-#~ "can\n"
-#~ "do everything! That is why you must choose a password that is difficult "
-#~ "to\n"
-#~ "guess - DrakX will tell you if the password you chose is too easy. As "
-#~ "you\n"
-#~ "can see, you are not forced to enter a password, but we strongly advise "
-#~ "you\n"
-#~ "against this. GNU/Linux is just as prone to operator error as any other\n"
-#~ "operating system. Since \"root\" can overcome all limitations and\n"
-#~ "unintentionally erase all data on partitions by carelessly accessing the\n"
-#~ "partitions themselves, it is important that it be difficult to become\n"
-#~ "\"root\".\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. Never write down the \"root\" password -- it makes it "
-#~ "far\n"
-#~ "too easy to compromise a system.\n"
-#~ "\n"
-#~ "One caveat -- do not make the password too long or complicated because "
-#~ "you\n"
-#~ "must be able to remember it!\n"
-#~ "\n"
-#~ "The password will not be displayed on screen as you type it in. To "
-#~ "reduce\n"
-#~ "the chance of a blind typing error you will need to enter the password\n"
-#~ "twice. If you do happen to make the same typing error twice, this\n"
-#~ "``incorrect'' password will be the one you will have use the first time "
-#~ "you\n"
-#~ "connect.\n"
-#~ "\n"
-#~ "If you wish access to this computer to be controlled by an "
-#~ "authentication\n"
-#~ "server, click the \"%s\" button.\n"
-#~ "\n"
-#~ "If your network uses either LDAP, NIS, or PDC Windows Domain "
-#~ "authentication\n"
-#~ "services, select the appropriate one for \"%s\". If you do not know "
-#~ "which\n"
-#~ "one to use, you should ask your network administrator.\n"
-#~ "\n"
-#~ "If you happen to have problems with remembering passwords, if your "
-#~ "computer\n"
-#~ "will never be connected to the Internet and you absolutely trust "
-#~ "everybody\n"
-#~ "who uses your computer, you can choose to have \"%s\"."
-#~ msgstr ""
-#~ "Aquesta és la decisió més important quant a la seguretat del vostre "
-#~ "sistema\n"
-#~ "GNU/Linux: heu d'introduir la contrasenya de l'usuari \"root\". El \"root"
-#~ "\"\n"
-#~ "és l'administrador del sistema i és l'únic autoritzat a fer "
-#~ "actualitzacions,\n"
-#~ "afegir usuaris, canviar la configuració del tot el sistema, etc. En "
-#~ "poques\n"
-#~ "paraules, el \"root\" ho pot fer tot! És per això que heu d'escollir una\n"
-#~ "contrasenya que sigui difícil d'endevinar; DrakX us avisarà si és massa\n"
-#~ "fàcil. Com veieu, podeu optar per no introduir cap contrasenya, però us\n"
-#~ "aconsellem vivament que no ho feu. GNU/Linux és tan vulnerable als "
-#~ "errors\n"
-#~ "de l'operador com qualsevol altre sistema operatiu. Com que l'usuari\n"
-#~ "\"root\" pot superar totes les limitacions i esborrar accidentalment "
-#~ "totes\n"
-#~ "les dades de qualsevol partició com a conseqüència d'accedir-hi sense\n"
-#~ "precaucions, és molt important que sigui difícil esdevenir \"root\".\n"
-#~ "\n"
-#~ "La contrasenya ha de ser una mescla de caràcters alfanumèrics i, com a\n"
-#~ "mínim, de 8 caràcters de longitud. No apunteu enlloc la contrasenya de\n"
-#~ "\"root\" ja que és molt fàcil comprometre el sistema si ho feu.\n"
-#~ "\n"
-#~ "Tot i això, no feu la contrasenya massa llarga o complicada perquè heu "
-#~ "de\n"
-#~ "poder recordar-la!\n"
-#~ "\n"
-#~ "La contrasenya no es mostrarà per pantalla quan la teclegeu. Per tant,\n"
-#~ "haureu d'escriure-la dues vegades per reduir la probabilitat d'errors en\n"
-#~ "l'escriptura. Si, malauradament, feu el mateix error dues vegaDES, "
-#~ "haureu\n"
-#~ "d'usar aquesta contrasenya ``incorrecta'' el primer cop que us "
-#~ "connecteu.\n"
-#~ "\n"
-#~ "Si voleu que aquest ordinador sigui controlat per un servidor\n"
-#~ "d'autenticació, feu clic al botó \"%s\".\n"
-#~ "\n"
-#~ "Si la vostra xarxa usa els serveis d'autenticació LDAP, NIS o Windows\n"
-#~ "Domain, seleccioneu l'adient per a \"%s\" . Si no sabeu quin utilitzar,\n"
-#~ "pregunteu-ho al vostre administrador de xarxa.\n"
-#~ "\n"
-#~ "Si teniu problemes per recordar les contrasenyes, si l'ordinador mai no "
-#~ "es\n"
-#~ "connectarà a Internet o si confieu absolutament en tothom que utilitza\n"
-#~ "l'ordinador, podeu triar tenir \"%s\"."
-
-#~ msgid ""
-#~ "This dialog allows you to fine tune your bootloader:\n"
-#~ "\n"
-#~ " * \"%s\": there are three choices for your bootloader:\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer GRUB (text menu).\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer LILO with its text menu interface.\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer LILO with its graphical interface.\n"
-#~ "\n"
-#~ " * \"%s\": in most cases, you will not change the default (\"%s\"), but "
-#~ "if\n"
-#~ "you prefer, the bootloader can be installed on the second hard drive\n"
-#~ "(\"%s\"), or even on a floppy disk (\"%s\");\n"
-#~ "\n"
-#~ " * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
-#~ "given to the user at the console to select a boot entry other than the\n"
-#~ "default.\n"
-#~ "\n"
-#~ " * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n"
-#~ "management, notably for laptops. If you know your hardware supports it "
-#~ "and\n"
-#~ "you need it, check this box.\n"
-#~ "\n"
-#~ " * \"%s\": If you noticed hardware problems on your machine (IRQ "
-#~ "conflicts,\n"
-#~ "instabilities, machine freeze, ...) you should try disabling APIC by\n"
-#~ "checking this box.\n"
-#~ "\n"
-#~ "!! Be aware that if you choose not to install a bootloader (by selecting\n"
-#~ "\"%s\"), you must ensure that you have a way to boot your Mandriva Linux\n"
-#~ "system! Be sure you know what you are doing before changing any of the\n"
-#~ "options. !!\n"
-#~ "\n"
-#~ "Clicking the \"%s\" button in this dialog will offer advanced options "
-#~ "which\n"
-#~ "are normally reserved for the expert user."
-#~ msgstr ""
-#~ "Aquest diàleg us permet ajustar el carregador d'arrencada:\n"
-#~ "\n"
-#~ " * \"%s\": hi ha tres opcions per al carregador d'arrencada:\n"
-#~ "\n"
-#~ "    * \"%s\": si preferiu el GRUB (menú de text).\n"
-#~ "\n"
-#~ "    * \"%s\": si preferiu el LILO amb la seva interfície de menús de "
-#~ "text.\n"
-#~ "\n"
-#~ "    * \"%s\": si preferiu el LILO amb la seva interfície gràfica.\n"
-#~ "\n"
-#~ " * \"%s\": en la majoria de casos, no heu de canviar l'opció\n"
-#~ "per defecte (\"%s\"), però,si ho preferiu, el carregador d'arrencada\n"
-#~ "pot instal·lar-se en el segon disc dur (\"%s\"), o fins i tot en un \n"
-#~ "disquet (\"%s\").\n"
-#~ "\n"
-#~ " * \"%s\": quan s'arrenca o es torna a arrencar l'ordinador, aquest\n"
-#~ "és el temps de què disposa l'usuari per escollir una entrada diferent\n"
-#~ "de l'entrada per defecte en el menú d'arrencada.\n"
-#~ "\n"
-#~ " * \"%s\": ACPI és un nou estàndard (aparegut durant l'any 2002) per a "
-#~ "la\n"
-#~ "gestió d'energia, principalment dels portàtils. Si sabeu que el vostre\n"
-#~ "maquinari el suporta i que el necessiteu marqueu aquesta opció.\n"
-#~ "\n"
-#~ " * \"%s\": Si heu tingut problemes de maquinari al vostre ordinador\n"
-#~ "(conflictes IRQ, poca estabilitat, penjades de l'ordinador, ...) haurieu "
-#~ "de\n"
-#~ "probar a desactivar APIC marcant aquesta opció.\n"
-#~ "\n"
-#~ "!! Tingueu en compte que si escolliu no instal·lar un carregador\n"
-#~ "d'arrencada (seleccionant \"%s\"), heu d'estar segurs que teniu alguna\n"
-#~ "manera d'arrencar el vostre sistema Mandriva Linux! Assegureu-vos de\n"
-#~ "saber què feu abans de canviar alguna de les opcions!!\n"
-#~ "\n"
-#~ "Si feu clic al botó \"%s\" d'aquest diàleg accedireu a algunes opcions\n"
-#~ "avançaDES, reservades normalment als usuaris experts."
-
-#~ msgid "GRUB"
-#~ msgstr "GRUB"
-
-#~ msgid "/dev/hda"
-#~ msgstr "/dev/hda"
-
-#~ msgid "/dev/hdb"
-#~ msgstr "/dev/hdb"
-
-#~ msgid "/dev/fd0"
-#~ msgstr "/dev/fd0"
-
-#~ msgid "Delay before booting the default image"
-#~ msgstr "Demora abans d'arrencar la imatge predeterminada"
-
-#~ msgid ""
-#~ "After you have configured the general bootloader parameters, the list of\n"
-#~ "boot options that will be available at boot time will be displayed.\n"
-#~ "\n"
-#~ "If there are other operating systems installed on your machine they will\n"
-#~ "automatically be added to the boot menu. You can fine-tune the existing\n"
-#~ "options by clicking \"%s\" to create a new entry; selecting an entry and\n"
-#~ "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
-#~ "changes.\n"
-#~ "\n"
-#~ "You may also not want to give access to these other operating systems to\n"
-#~ "anyone who goes to the console and reboots the machine. You can delete "
-#~ "the\n"
-#~ "corresponding entries for the operating systems to remove them from the\n"
-#~ "bootloader menu, but you will need a boot disk in order to boot those "
-#~ "other\n"
-#~ "operating systems!"
-#~ msgstr ""
-#~ "Un cop configurats els paràmetres generals del carregador de "
-#~ "l'arrencada, \n"
-#~ "es mostrarà la llista d'opcions de càrrega que es veurà en arrencar la "
-#~ "màquina.\n"
-#~ "\n"
-#~ "Si hi ha algun altre sistema operatiu instal·lat en el vostre ordinador, "
-#~ "s'afegirà\n"
-#~ "automàticament al menú d'arrencada. Podeu ajustar les opcions existents "
-#~ "fent\n"
-#~ "clic a \"%s\" per crear una nova entrada, i seleccionant una entrada i "
-#~ "fent clic\n"
-#~ "a \"%s\" o a \"%s\" per modificar-la o eliminar-la. \"%s\" valida els "
-#~ "canvis.\n"
-#~ "\n"
-#~ "També és possible que no vulgueu permetre l'accés a aquests sistemes "
-#~ "operatius\n"
-#~ "a qualsevol que vagi a la consola i reiniciï l'ordinador; en aquest cas, "
-#~ "podeu suprimir\n"
-#~ "les entrades corresponents a aquests sistemes operatius per eliminar-los "
-#~ "del menú\n"
-#~ "del carregador d'arrencada, però aleshores us caldrà un disc d'arrencada "
-#~ "per poder-los\n"
-#~ "arrencar!"
-
-#~ msgid ""
-#~ "LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a GRUB/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or any\n"
-#~ "other OS installed on your machine.\n"
-#~ "\n"
-#~ " * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
-#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n"
-#~ "will not install any bootloader. Use it only if you know what you are "
-#~ "doing."
-#~ msgstr ""
-#~ "LILO i GRUB són carregadors d'arrencada de GNU/Linux. Normalment,\n"
-#~ "aquesta fase es realitza de manera totalment automàtica. DrakX "
-#~ "analitzarà\n"
-#~ "el sector d'arrencada del disc i actuarà conforme al que hi trobi:\n"
-#~ "\n"
-#~ " * si troba un sector d'arrencada del Windows, el reemplaçarà amb un "
-#~ "sector\n"
-#~ "d'arrencada de GRUB/LILO. D'aquesta manera podreu carregar GNU/Linux\n"
-#~ "o un altre SO.\n"
-#~ "\n"
-#~ " * si troba un sector d'arrencada grub o LILO, el reemplaçarà amb un "
-#~ "nou.\n"
-#~ "\n"
-#~ "Si no pot prendre una decisió,  DrakX us preguntarà on ha de col·locar "
-#~ "el\n"
-#~ "carregador d'arrencada. Normalment, \"%s\" és el lloc més segur. Si "
-#~ "escolliu\n"
-#~ "\"%s\" no s'instal·larà cap carregador d'arrencada. Utilitzeu-lo només "
-#~ "si\n"
-#~ "sabeu que esteu fent."
-
-#~ msgid ""
-#~ "Now, it's time to select a printing system for your computer. Other OSs "
-#~ "may\n"
-#~ "offer you one, but Mandriva Linux offers two. Each of the printing "
-#~ "systems\n"
-#~ "is best suited to particular types of configuration.\n"
-#~ "\n"
-#~ " * \"%s\" -- which is an acronym for ``print, do not queue'', is the "
-#~ "choice\n"
-#~ "if you have a direct connection to your printer, you want to be able to\n"
-#~ "panic out of printer jams, and you do not have networked printers. (\"%s"
-#~ "\"\n"
-#~ "will handle only very simple network cases and is somewhat slow when "
-#~ "used\n"
-#~ "with networks.) It's recommended that you use \"pdq\" if this is your "
-#~ "first\n"
-#~ "experience with GNU/Linux.\n"
-#~ "\n"
-#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
-#~ "printing to your local printer or to one halfway around the planet. It "
-#~ "is\n"
-#~ "simple to configure and can act as a server or a client for the ancient\n"
-#~ "\"lpd \" printing system, so it is compatible with older operating "
-#~ "systems\n"
-#~ "which may still need print services. While quite powerful, the basic "
-#~ "setup\n"
-#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
-#~ "make\n"
-#~ "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
-#~ "front-ends for printing or choosing printer options and for managing the\n"
-#~ "printer.\n"
-#~ "\n"
-#~ "If you make a choice now, and later find that you do not like your "
-#~ "printing\n"
-#~ "system you may change it by running PrinterDrake from the Mandrake "
-#~ "Control\n"
-#~ "Center and clicking the expert button."
-#~ msgstr ""
-#~ "Ara cal seleccionar el sistema d'impressió del vostre ordinador. Altres\n"
-#~ "sistemes operatius us poden oferir un, però el Mandriva Linux n'ofereix\n"
-#~ "dos. Cada sistema d'impressió és el més convenient per a un tipus de\n"
-#~ "configuració determinat.\n"
-#~ "\n"
-#~ " * \"%s\", acrònim de \"print, do not queue\" (imprimeix, no facis cua), "
-#~ "és\n"
-#~ "la millor opció si teniu una connexió directa amb la impressora i voleu\n"
-#~ "evitar els embussos a l'hora d'imprimir, i no teniu impressores de "
-#~ "xarxa.\n"
-#~ "(\"%s\" només gestionarà xarxes molt senzilles i és una mica lenta quan\n"
-#~ "s'usa en xarxa.) Escolliu \"pdq\" si és la vostra primera incursió\n"
-#~ "en GNU/Linux.\n"
-#~ "\n"
-#~ " * \"%s\" `` Common Unix Printing System'', Sistema d'impressió comú de\n"
-#~ "Unix, és una elecció excel·lent tant si voleu imprimir a la vostra\n"
-#~ "impressora local com a l'altra punta del món. És senzilla de configurar "
-#~ "i\n"
-#~ "pot actuar com a servidor o client per a l'antic sistema d'impressió \"lpd"
-#~ "\"\n"
-#~ "i, per tant, és compatible amb sistemes operatius antics que encara\n"
-#~ "necessitin serveis d'impressió. És força potent, però la configuració "
-#~ "bàsica\n"
-#~ "és gairebé tan senzilla com la de \"pdq\". Si necessiteu emular un "
-#~ "servidor\n"
-#~ "\"lpd\", heu d'habilitar el dimoni \"cups-lpd\". \"%s\" inclou frontals\n"
-#~ "gràfics per a la impressió o per escollir les opcions d'impressió\n"
-#~ "i per gestionar la impressora.\n"
-#~ "\n"
-#~ "Si ara feu una tria, i després veieu que el sistema d'impressió no us\n"
-#~ "agrada, podeu canviar-lo executant el PrinterDrake des del Centre de "
-#~ "control\n"
-#~ "de Mandriva Linux i fent clic al botó Expert."
-
-#~ msgid ""
-#~ "You can add additional entries in yaboot for other operating systems,\n"
-#~ "alternate kernels, or for an emergency boot image.\n"
-#~ "\n"
-#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
-#~ "partition.\n"
-#~ "\n"
-#~ "For Linux, there are a few possible options:\n"
-#~ "\n"
-#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
-#~ "select this boot option.\n"
-#~ "\n"
-#~ " * Image: this is the name of the kernel to boot. Typically, vmlinux or "
-#~ "a\n"
-#~ "variation of vmlinux with an extension.\n"
-#~ "\n"
-#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-#~ "\n"
-#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
-#~ "assist in initializing video hardware, or to enable keyboard mouse "
-#~ "button\n"
-#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
-#~ "mouse.\n"
-#~ "The following are some examples:\n"
-#~ "\n"
-#~ "   \t      video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-#~ "hda=autotune\n"
-#~ "\n"
-#~ "   \t      video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-#~ "\n"
-#~ " * Initrd: this option can be used either to load initial modules before\n"
-#~ "the boot device is available, or to load a ramdisk image for an "
-#~ "emergency\n"
-#~ "boot situation.\n"
-#~ "\n"
-#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
-#~ "you\n"
-#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
-#~ "ramdisk larger than the default.\n"
-#~ "\n"
-#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
-#~ "read-only, to allow a file system check before the system becomes "
-#~ "``live''.\n"
-#~ "You can override the default with this option.\n"
-#~ "\n"
-#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-#~ "problematic, you can select this option to boot in ``novideo'' mode, "
-#~ "with\n"
-#~ "native frame buffer support.\n"
-#~ "\n"
-#~ " * Default: selects this entry as being the default Linux selection,\n"
-#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
-#~ "be\n"
-#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
-#~ msgstr ""
-#~ "Podeu afegir entrades addicionals per al yaboot, ja sigui per a altres\n"
-#~ "sistemes operatius, nuclis alternatius, o per a una imatge per a "
-#~ "arrencades\n"
-#~ "d'emergència.\n"
-#~ "\n"
-#~ "Per a altres SO, l'entrada només consta d'una etiqueta i de la\n"
-#~ "partició arrel.\n"
-#~ "\n"
-#~ "Per Linux, hi ha unes quantes opcions possibles:\n"
-#~ "\n"
-#~ " * Etiqueta: el nom a escriure en l'indicador del yaboot per\n"
-#~ "seleccionar aquesta opció d'arrencada.\n"
-#~ "\n"
-#~ " * Imatge: el nom del nucli a arrencar. Normalment, vmlinux o una\n"
-#~ "variació de vmlinux amb una extensió.\n"
-#~ "\n"
-#~ " * Arrel: el dispositiu arrel o '/' per a la instal·lació del Linux.\n"
-#~ "\n"
-#~ " * Addició: en maquinari Apple, l'opció d'addició de nuclis s'utilitza\n"
-#~ "força sovint per auxiliar en la inicialització de maquinari de vídeo o "
-#~ "per\n"
-#~ "habilitar l'emulació del botó del ratolí de teclat per als 2n i 3r "
-#~ "botons,\n"
-#~ "que sovint no existeixen en un ratolí Apple convencional. Alguns "
-#~ "exemples\n"
-#~ "d'això són:\n"
-#~ "\n"
-#~ "         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-#~ "hda=autotune\n"
-#~ "\n"
-#~ "         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-#~ "\n"
-#~ " * Initrd: aquesta opció es pot utilitzar per carregar els mòduls "
-#~ "inicials,\n"
-#~ "abans que el dispositiu d'arrencada estigui disponible, o per carregar\n"
-#~ "una imatge de disc RAM en una situació d'arrencada d'emergència.\n"
-#~ "\n"
-#~ " * Initrd-size: la mida per defecte del disc RAM sol ser de 4096 kB.\n"
-#~ "Si necessiteu assignar un disc RAM gran, podeu utilitzar aquesta opció\n"
-#~ "per indicar un disc RAM més gran que el predeterminat.\n"
-#~ "\n"
-#~ " * Lectura-Escriptura: normalment, la partició arrel es munta inicialment "
-#~ "com de\n"
-#~ "només lectura per permetre una comprovació del sistema de fitxers abans "
-#~ "que el\n"
-#~ "sistema esdevingui \"viu\". Podeu substituir el valor per defecte amb "
-#~ "aquesta opció.\n"
-#~ "\n"
-#~ " * Sense Vídeo: en cas que el maquinari de vídeo d'Apple resulti "
-#~ "especialment\n"
-#~ "problemàtic, podeu seleccionar aquesta opció per arrencar en mode 'no-"
-#~ "vídeo',\n"
-#~ "amb el suport nadiu framebuffer.\n"
-#~ "\n"
-#~ " * Per defecte: seleccioneu aquesta entrada com a selecció per defecte "
-#~ "del\n"
-#~ "Linux; se selecciona prement simplement Retorn a l'indicador del yaboot.\n"
-#~ "Aquesta entrada també es ressaltarà amb un ``*'' si premeu Tab per veure "
-#~ "les\n"
-#~ "seleccions d'arrencada."
-
-#~ msgid ""
-#~ "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used "
-#~ "to\n"
-#~ "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are "
-#~ "correctly\n"
-#~ "detected and installed in the bootloader menu. If this is not the case, "
-#~ "you\n"
-#~ "can add an entry by hand in this screen. Take care to choose the correct\n"
-#~ "parameters.\n"
-#~ "\n"
-#~ "Yaboot's main options are:\n"
-#~ "\n"
-#~ " * Init Message: a simple text message displayed before the boot prompt.\n"
-#~ "\n"
-#~ " * Boot Device: indicates where you want to place the information "
-#~ "required\n"
-#~ "to boot to GNU/Linux. Generally, you set up a bootstrap partition "
-#~ "earlier\n"
-#~ "to hold this information.\n"
-#~ "\n"
-#~ " * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-#~ "yaboot. The first delay is measured in seconds and at this point, you "
-#~ "can\n"
-#~ "choose between CD, OF boot, MacOS or Linux;\n"
-#~ "\n"
-#~ " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-#~ "After selecting Linux, you will have this delay in 0.1 second increments\n"
-#~ "before your default kernel description is selected;\n"
-#~ "\n"
-#~ " * Enable CD Boot?: checking this option allows you to choose ``C'' for "
-#~ "CD\n"
-#~ "at the first boot prompt.\n"
-#~ "\n"
-#~ " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-#~ "Open Firmware at the first boot prompt.\n"
-#~ "\n"
-#~ " * Default OS: you can select which OS will boot by default when the "
-#~ "Open\n"
-#~ "Firmware Delay expires."
-#~ msgstr ""
-#~ "Yaboot és un carregador d'arrencada per a maquinari Macintosh NewWorld.\n"
-#~ "Pot arrencar tant GNU/Linux com MacOS o MacOSX. Normalment,\n"
-#~ "MacOS i MacOSX es detecten i instal·len correctament en el menú del\n"
-#~ "carregador d'arrencada; si no és així, però, en aquesta pantalla podeu\n"
-#~ "afegir una entrada manualment. Aneu amb compte de triar els paràmetres\n"
-#~ "correctes.\n"
-#~ "\n"
-#~ "Les opcions principals del Yaboot són:\n"
-#~ "\n"
-#~ " * Missatge d'inicialització: un senzill missatge de text que apareix "
-#~ "abans\n"
-#~ "de l'indicador d'arrencada.\n"
-#~ "\n"
-#~ " * Dispositiu d'arrencada: indica on voleu situar la informació "
-#~ "necessària\n"
-#~ "per arrencar el GNU/Linux. Normalment, haureu configurat abans una "
-#~ "partició\n"
-#~ "bootstrap que contindrà aquesta informació.\n"
-#~ "\n"
-#~ " * Demora de l'Open Firmware: a diferència del LILO, amb el Yaboot hi ha\n"
-#~ "dues demores disponibles. La primera d'elles es mesura en segons i, en\n"
-#~ "aquest punt, podeu triar entre CD, arrencada OF, MacOS o Linux.\n"
-#~ "\n"
-#~ " * Temps màxim d'arrencada del nucli: aquest temps màxim és similar a la\n"
-#~ "demora d'arrencada del LILO. Després de seleccionar el Linux tindreu "
-#~ "aquest\n"
-#~ "temps en increments de 0,1 segons abans que se seleccioni la descripció "
-#~ "per\n"
-#~ "defecte del nucli.\n"
-#~ "\n"
-#~ " * Habilita l'arrencada des de CD: si activeu aquesta opció podreu triar\n"
-#~ "``C'' per a CD al primer indicador de l'arrencada.\n"
-#~ "\n"
-#~ " * Habilita l'arrencada OF: si activeu aquesta opció podreu triar ``N`` "
-#~ "per\n"
-#~ "a Open Firmware al primer indicador de l'arrencada.\n"
-#~ "\n"
-#~ " * SO per defecte: podeu seleccionar amb quin SO, per defecte, "
-#~ "s'arrencarà\n"
-#~ "quan la demora de l'Open Firmware venci."
-
-#~ msgid ""
-#~ "\"%s\": if a sound card is detected on your system, it is displayed "
-#~ "here.\n"
-#~ "If you notice the sound card displayed is not the one that is actually\n"
-#~ "present on your system, you can click on the button and choose another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "\"%s\": si es detecta una targeta de so al vostre sistema, es mostra "
-#~ "aquí.\n"
-#~ "Si veieu que la targeta de so que es mostra no és la que realment teniu "
-#~ "al\n"
-#~ "sistema, podeu fer clic al botó i seleccionar un altre programa de "
-#~ "control."
-
-#~ msgid ""
-#~ "As a review, DrakX will present a summary of information it has about "
-#~ "your\n"
-#~ "system. Depending on your installed hardware, you may have some or all "
-#~ "of\n"
-#~ "the following entries. Each entry is made up of the configuration item "
-#~ "to\n"
-#~ "be configured, followed by a quick summary of the current configuration.\n"
-#~ "Click on the corresponding \"%s\" button to change that.\n"
-#~ "\n"
-#~ " * \"%s\": check the current keyboard map configuration and change it if\n"
-#~ "necessary.\n"
-#~ "\n"
-#~ " * \"%s\": check the current country selection. If you are not in this\n"
-#~ "country, click on the \"%s\" button and choose another one. If your "
-#~ "country\n"
-#~ "is not in the first list shown, click the \"%s\" button to get the "
-#~ "complete\n"
-#~ "country list.\n"
-#~ "\n"
-#~ " * \"%s\": By default, DrakX deduces your time zone based on the country\n"
-#~ "you have chosen. You can click on the \"%s\" button here if this is not\n"
-#~ "correct.\n"
-#~ "\n"
-#~ " * \"%s\": check the current mouse configuration and click on the button "
-#~ "to\n"
-#~ "change it if necessary.\n"
-#~ "\n"
-#~ " * \"%s\": clicking on the \"%s\" button will open the printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
-#~ "\n"
-#~ " * \"%s\": if a sound card is detected on your system, it is displayed\n"
-#~ "here. If you notice the sound card displayed is not the one that is\n"
-#~ "actually present on your system, you can click on the button and choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"%s\": by default, DrakX configures your graphical interface in\n"
-#~ "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click "
-#~ "on\n"
-#~ "\"%s\" to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"%s\": if a TV card is detected on your system, it is displayed "
-#~ "here.\n"
-#~ "If you have a TV card and it is not detected, click on \"%s\" to try to\n"
-#~ "configure it manually.\n"
-#~ "\n"
-#~ " * \"%s\": if an ISDN card is detected on your system, it will be "
-#~ "displayed\n"
-#~ "here. You can click on \"%s\" to change the parameters associated with "
-#~ "the\n"
-#~ "card.\n"
-#~ "\n"
-#~ " * \"%s\": If you wish to configure your Internet or local network "
-#~ "access\n"
-#~ "now.\n"
-#~ "\n"
-#~ " * \"%s\": this entry allows you to redefine the security level as set in "
-#~ "a\n"
-#~ "previous step ().\n"
-#~ "\n"
-#~ " * \"%s\": if you plan to connect your machine to the Internet, it's a "
-#~ "good\n"
-#~ "idea to protect yourself from intrusions by setting up a firewall. "
-#~ "Consult\n"
-#~ "the corresponding section of the ``Starter Guide'' for details about\n"
-#~ "firewall settings.\n"
-#~ "\n"
-#~ " * \"%s\": if you wish to change your bootloader configuration, click "
-#~ "that\n"
-#~ "button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"%s\": here you'll be able to fine control which services will be "
-#~ "run\n"
-#~ "on your machine. If you plan to use this machine as a server it's a good\n"
-#~ "idea to review this setup."
-#~ msgstr ""
-#~ "Com a revisió, DrakX presentarà un resum de la informació que\n"
-#~ "té sobre el vostre sistema. Segons el maquinari instal·lat, podeu\n"
-#~ "tenir algunes o totes les entrades següents. Cada entrada consta\n"
-#~ "de l'element de configuració que cal configurar, seguit d'un breu\n"
-#~ "resum de la configuració actual.\n"
-#~ "Feu clic al botó \"%s\" corresponent per canviar-ho.\n"
-#~ "\n"
-#~ " * \"%s\": comproveu la configuració actual del mapa de teclat i\n"
-#~ "canvieu-la si és necessari.\n"
-#~ "\n"
-#~ " * \"%s\": comproveu la selecció actual de país. Si no sou a aquest\n"
-#~ "país, feu clic al botó \"%s\" i escolliu-ne un altre. Si el vostre\n"
-#~ "país no és a la primera llista que es mostra, feu clic al botó \"%s\"\n"
-#~ "per obtenir una llista de països completa.\n"
-#~ "\n"
-#~ " * \"%s\": per defecte, DrakX dedueix la vostra zona horària en\n"
-#~ "funció del país que hagueu escollit. Aquí podeu fer clic al botó \"%s\"\n"
-#~ "si no fos correcta.\n"
-#~ "\n"
-#~ " * \"%s\": comproveu la configuració actual del ratolí i feu clic al\n"
-#~ "botó per canviar-la si fos necessari.\n"
-#~ "\n"
-#~ " * \"%s\": feu clic al botó \"%s\" per obrir l'auxiliar de configuració\n"
-#~ "de la impressora. Consulteu el capítol corresponent de la ``Guia d'\n"
-#~ "iniciació'' per tenir més informació sobre la configuració d'una nova\n"
-#~ "impressora. Aquesta interfície és similar a la utilitzada durant la\n"
-#~ "instal·lació.\n"
-#~ "\n"
-#~ " * \"%s\": si es detecta una targeta de so al vostre sistema, es\n"
-#~ "mostra aquí. Si veieu que que no és la que realment teniu al sistema,\n"
-#~ "podeu fer clic al botó per triar un altre controlador.\n"
-#~ "\n"
-#~ " * \"%s\": per defecte, DrakX configura la vostra interfície\n"
-#~ "gràfica a una resolució de \"800x600\" or \"1024x768\". Si no us\n"
-#~ "va bé, feu clic a \"%s\" per reconfigurar la interfície gràfica.\n"
-#~ "\n"
-#~ " * \"%s\": si es detecta una targeta de TV al sistema, es mostra\n"
-#~ "aquí. Si en teniu una però no és detectada, feu clic a \"%s\" per\n"
-#~ "intentar configurar-la manualment.\n"
-#~ "\n"
-#~ " * \"%s\": si es detecta una targeta XDSI al sistema, es mostra\n"
-#~ "aquí. Podeu fer clic a \"%s\" per canviar els paràmetres associats\n"
-#~ "amb la targeta.\n"
-#~ "\n"
-#~ " * \"%s\": si voleu configurar ara l'accés a Internet o a la xarxa "
-#~ "local.\n"
-#~ "\n"
-#~ " * \"%s\": aquesta entrada un permet redefinir el nivell de seguretat\n"
-#~ "definit en un pas anterior ().\n"
-#~ "\n"
-#~ " * \"%s\": si teniu previst connectar-vos a Internet, és bona idea\n"
-#~ "protegir-vos d'intrusions instal·lant un tallafocs. Consulteu-ne\n"
-#~ "els detalls a la secció corresponent de la ``Guia d'iniciació''.\n"
-#~ "\n"
-#~ " * \"%s\": si voleu canviar la configuració del carregador d'arrencada,\n"
-#~ "feu clic a aquest botó. Es recomana que això només ho facin els usuaris\n"
-#~ "avançats.\n"
-#~ "\n"
-#~ " * \"%s\": aquí podreu acabar d'ajustar els serveis que s'executaran\n"
-#~ "en el vostre ordinador. Si teniu previst utilitzar aquesta màquina com\n"
-#~ "a servidor, és aconsellable que reviseu aquesta configuració."
-
-#~ msgid ""
-#~ "No ethernet network adapter has been detected on your system.\n"
-#~ "I cannot set up this connection type."
-#~ msgstr ""
-#~ "No s'ha detectat cap adaptador de xarxa ethernet al sistema.\n"
-#~ "No puc configurar aquest tipus de connexió."
-
-#~ msgid ""
-#~ "Please choose which network adapter you want to use to connect to "
-#~ "Internet."
-#~ msgstr ""
-#~ "Si us plau, seleccioneu quin adaptador de xarxa voleu utilitzar per\n"
-#~ "connectar-vos a Internet."
-
-#~ msgid ""
-#~ "To submit a bug report, click on the button report.\n"
-#~ "This will open  a web browser window on %s\n"
-#~ " where you'll find a form to fill in.  The information displayed above "
-#~ "will be \n"
-#~ "transferred to that server."
-#~ msgstr ""
-#~ "Per trametre un informe d'error de programació, feu clic al botó "
-#~ "'Informa'.\n"
-#~ "S'obrirà una finestra del navegador web amb la pàgina %s\n"
-#~ "on trobareu un formulari per omplir. La informació que es mostra més "
-#~ "amunt s'enviarà al servidor."
-
-#~ msgid "chunk size"
-#~ msgstr "mida del fragment"
-
-#~ msgid "mkraid failed (maybe raidtools are missing?)"
-#~ msgstr "L'mkraid ha fallat (potser manquen les eines del RAID (raidtools)?)"
-
-#~ msgid "mkraid failed"
-#~ msgstr "L'mkraid ha fallat"
-
-#~ msgid "<b>Mandrake Control Center</b>"
-#~ msgstr "<b>Centre de Control Mandriva Linux</b>"
-
-#~ msgid ""
-#~ "The Mandrake Control Center is an essential collection of Mandrake-"
-#~ "specific utilities for simplifying the configuration of your computer."
-#~ msgstr ""
-#~ "El Centre de Control Mandrake és una col·lecció essencial de utilitats "
-#~ "específiques de Mandrake per simplificar la configuració del vostre "
-#~ "ordinador."
-
-#~ msgid ""
-#~ "Find all Mandriva products and services at <b>MandrakeStore</b> -- our "
-#~ "full service e-commerce platform."
-#~ msgstr ""
-#~ "Conegui tots els productes i serveis de Mandriva a <b>MandrakeStore</b> "
-#~ "-- la nostra plataforma de serveis de comerç electrònic."
-
-#
-#~ msgid "Become a <b>MandrakeClub</b> member!"
-#~ msgstr "Esdeveniu un membre del <b>MandrakeClub</b>!"
-
-#~ msgid ""
-#~ "\t* Special download mirror list exclusively for MandrakeClub Members"
-#~ msgstr "\t* Llista de rèpliques exclusiva pels membres del MandrakeClub"
-
-#~ msgid "\t* Special discounts for products and services at MandrakeStore"
-#~ msgstr "\t* Descomptes especials en productes i serveis de MandrakeStore"
-
-#~ msgid ""
-#~ "\t* Find out Mandriva Linux on a bootable CD with <b>Mandriva Move</b>"
-#~ msgstr ""
-#~ "\t* Conegui Mandriva Linux en un CD autoarrancable amb <b>Mandriva Move</"
-#~ "b>"
-
-#~ msgid ""
-#~ "Find all Mandriva products at <b>MandrakeStore</b> -- our full service e-"
-#~ "commerce platform."
-#~ msgstr ""
-#~ "Conegui tots els productes de Mandriva a <b>MandrakeStore</b> -- la "
-#~ "nostra plataforma de serveis de comerç electrònic."
-
-#
-#~ msgid "<b>Become a MandrakeClub member!</b>"
-#~ msgstr "<b>Esdeveniu un membre del MandrakeClub!</b>"
-
-#~ msgid ""
-#~ "\t* <b>Vim</b>: advanced text editor with more features than standard Vi"
-#~ msgstr ""
-#~ "\t* <b>Vim</b>: editor de text avançat amb més característiques que el vi "
-#~ "estàndard"
-
-#~ msgid ""
-#~ "[OPTIONS] [PROGRAM_NAME]\n"
-#~ "\n"
-#~ "OPTIONS:\n"
-#~ "  --help            - print this help message.\n"
-#~ "  --report          - program should be one of mandrake tools\n"
-#~ "  --incident        - program should be one of mandrake tools"
-#~ msgstr ""
-#~ "[OPCIONS] [NOM_DEL_PROGRAMA]\n"
-#~ "\n"
-#~ "OPCIONS:\n"
-#~ "  --help            - imprimeix aquest missatge d'ajuda.\n"
-#~ "  --report          - el programa ha de ser una de les eines de Mandrake\n"
-#~ "  --incident        - el programa ha de ser una de les eines de Mandrake"
-
-#~ msgid ""
-#~ "This interface has not been configured yet.\n"
-#~ "Run the \"Add an interface\" assistant from the Mandrake Control Center"
-#~ msgstr ""
-#~ "Aquesta interfície encara no s'ha configurat.\n"
-#~ "Executeu l'auxiliar \"Afegeix una interfície\" del Centre de Control de "
-#~ "Mandrake"
-
-#~ msgid "The alert wizard had unexpectly failled:"
-#~ msgstr "L'auxiliar d'alerta ha fallat:"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "La connexió ha fallat.\n"
-#~ "Comproveu la vostra configuració al Centre de control de Mandrake."
-
-#~ msgid "The package %s is needed. Install it?"
-#~ msgstr "Cal instal·lar el paquet %s. Voleu instal·lar-lo?"
-
-#~ msgid "ignore"
-#~ msgstr "ignora"
-
-#~ msgid "no"
-#~ msgstr "no"
-
-#~ msgid "yes"
-#~ msgstr "sí"
-
-#~ msgid "SILO Installation"
-#~ msgstr "Instal·lació del SILO"
-
-#~ msgid "First sector of boot partition"
-#~ msgstr "Primer sector de la partició d'arrencada"
-
-#~ msgid "Bootloader installation"
-#~ msgstr "Instal·lació del carregador de l'arrencada"
-
-#~ msgid "SILO"
-#~ msgstr "SILO"
-
-#~ msgid "Alcatel speedtouch usb"
-#~ msgstr "Alcatel Speedtouch USB"
-
-#~ msgid "Sagem (using pppoa) usb"
-#~ msgstr "USB Sagem (utilitzant el pppoa)"
-
-#~ msgid "Harddrake2 version %s"
-#~ msgstr "Versió del Harddrake2 %s"
-
-#~ msgid "transmitted"
-#~ msgstr "transmitits"
-
-#~ msgid "received"
-#~ msgstr "rebuts"
-
-#~ msgid ""
-#~ "You can export using NFS or SMB. Please select which you'd like to use."
-#~ msgstr ""
-#~ "Podeu exportar utilitzant NFS o SMB. Seleccioneu quin voleu utilitzar."
-
-#~ msgid ""
-#~ "You can export using NFS or Samba. Please select which you'd like to use."
-#~ msgstr ""
-#~ "Podeu exportar utilitzant NFS o Samba. Seleccioneu quin voleu utilitzar."
-
-#~ msgid "The package %s is going to be removed."
-#~ msgstr "El paquet %s serà eliminat."
-
-#
-#~ msgid "You must be root to read configuration file. \n"
-#~ msgstr "Us cal ser root per poder llegir el fitxer de configuració. \n"
-
-#~ msgid "Can not open %s!"
-#~ msgstr "No es pot obrir %s!"
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
-#~ "l'Xfree %s.\n"
-#~ "L'Xorg %s, que pot tenir un suport millor en 2D, suporta la vostra "
-#~ "targeta."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s,\n"
-#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "La vostra targeta pot tenir acceleració 3D de maquinari, però només amb "
-#~ "l'Xfree %s,\n"
-#~ "TINGUEU EN COMPTE QUE ES TRACTA D'UN SUPORT EXPERIMENTAL; L'ORDINADOR ES "
-#~ "POT PENJAR.\n"
-#~ "La vostra targeta està suportada per Xorg %s que pot tenir un suport "
-#~ "millor en 2D."
-
-#~ msgid "Xpmac (installation display driver)"
-#~ msgstr "Xpmac (instal·lació del controlador de pantalla)"
-
-#~ msgid "4 billion colors (32 bits)"
-#~ msgstr "4.294 milions de colors (32 bits)"
-
-#~ msgid "XFree86 server: %s\n"
-#~ msgstr "Servidor XFree86: %s\n"
-
-#~ msgid "Here is the full list of keyboards available"
-#~ msgstr "Aquesta és la llista completa de teclats disponibles"
-
-#~ msgid "Please insert the Boot floppy used in drive %s"
-#~ msgstr "Inseriu el disquet d'arrencada utilitzat a la unitat %s"
-
-#~ msgid "TCP/IP"
-#~ msgstr "TCP/IP"
-
-#~ msgid "Wireless"
-#~ msgstr "Wireless"
-
-#~ msgid ""
-#~ "Due to incompatibilities of the 2.6 series kernel with the LSB runtime\n"
-#~ "tests, the 2.4 series kernel will be installed as the default to insure\n"
-#~ "compliance under the \"LSB\" group selection."
-#~ msgstr ""
-#~ "A causa de incompatibilitats del nucli 2.6 amb les proves d'execució "
-#~ "LSB,\n"
-#~ "s'instal·larà el nucli 2.4 per assegurar la compatibilitat amb la "
-#~ "selecció del grup \"LSB\"."
-
-#~ msgid "XawTV is not installed!"
-#~ msgstr "No teniu instal·lat XawTV!"
-
-#~ msgid "Provider dns 1 (optional)"
-#~ msgstr "DNS 1 del proveïdor (opcional)"
-
-#~ msgid "Provider dns 2 (optional)"
-#~ msgstr "DNS 2 del proveïdor (opcional)"
-
-#~ msgid "DHCP Client"
-#~ msgstr "Client DHCP"
-
-#~ msgid "Display"
-#~ msgstr "Visualització"
-
-#~ msgid "Use tar and bzip2 (rather than tar and gzip)"
-#~ msgstr "Usa tar i bzip2 (en comptes de tar i gzip)"
-
-#~ msgid ""
-#~ "Change\n"
-#~ "Restore Path"
-#~ msgstr ""
-#~ "Canvia el camí\n"
-#~ "on restaurar"
-
-#
-#~ msgid "European protocol"
-#~ msgstr "Protocol europeu"
-
-#~ msgid "Found \"%s\" interface do you want to use it ?"
-#~ msgstr "S'ha trobat la interfície \"%s\". Voleu utilitzar-la?"
-
-#~ msgid "Bewan USB modem"
-#~ msgstr "Mòdem Bewan USB"
-
-#~ msgid "What kind is your ISDN connection?"
-#~ msgstr "Quin tipus de connexió XDSI teniu?"
-
-#~ msgid "Do you want to start a new configuration ?"
-#~ msgstr "Voleu iniciar una nova configuració?"
-
-#~ msgid ""
-#~ "I have detected an ISDN PCI card, but I do not know its type. Please "
-#~ "select a PCI card on the next screen."
-#~ msgstr ""
-#~ "S'ha detectat una targeta PCI XDSI, però no es reconeix el tipus. Si us "
-#~ "plau, seleccioneu una targeta PCI a la pantalla següent."
-
-#~ msgid "No ISDN PCI card found. Please select one on the next screen."
-#~ msgstr ""
-#~ "No s'ha trobat cap targeta PCI XDSI. Si us plau, seleccioneu-ne una a la "
-#~ "pantalla següent."
-
-#~ msgid "DrakTermServ"
-#~ msgstr "DrakTermServ"
-
-#~ msgid "Under Devel ... please wait."
-#~ msgstr "Sota desenvolupament ... espereu si us plau."
-
-#
-#~ msgid "Windows (FAT32)"
-#~ msgstr "Windows (FAT32)"
-
-#~ msgid ""
-#~ "Please enter the name of the interface connected to the "
-#~ "internet.              \n"
-#~ "                \n"
-#~ "Examples:\n"
-#~ "                ppp+ for modem or DSL connections, \n"
-#~ "                eth0, or eth1 for cable connection, \n"
-#~ "                ippp+ for a isdn connection.\n"
-#~ msgstr ""
-#~ "Si us plau, introduïu el nom de la interfície connectada a "
-#~ "internet.              \n"
-#~ "                \n"
-#~ "Exemples:\n"
-#~ "                ppp+ per a mòdem o connexions DSL, \n"
-#~ "                eth0, o eth1 per a connexions de cable, \n"
-#~ "                ippp+ per a connexions XDSI.\n"
-
-#~ msgid ""
-#~ "Enter your CD Writer device name\n"
-#~ " ex: 0,1,0"
-#~ msgstr ""
-#~ "Entreu el nom de dispositiu de l'enregistradora de CD\n"
-#~ " ex: 0,1,0"
-
-#~ msgid "Tone dialing"
-#~ msgstr "Marcació per tons"
-
-#~ msgid "Pulse dialing"
-#~ msgstr "Marcació per polsos"
-
-#~ msgid "Scientific Workstation"
-#~ msgstr "Estació de treball científica"
-
-#~ msgid "Scientific applications such as gnuplot"
-#~ msgstr "Aplicacions científiques com ara el gnuplot"
-
-#~ msgid "No wireless network adapter on your system!"
-#~ msgstr "No teniu cap adaptador wireless al sistema!"
-
-#~ msgid "Can not create log file!"
-#~ msgstr "No s'ha pogut crear el registre!"
-
-#~ msgid "dhcp"
-#~ msgstr "dhcp"
-
-#~ msgid "Please select media for backup..."
-#~ msgstr "Si us plau seleccioneu el suport per a la còpia..."
-
-#~ msgid "pfs"
-#~ msgstr "pfs"
-
-#
-#~ msgid "Configuration of a remote printer"
-#~ msgstr "Configuració d'una impressora remota"
-
-#~ msgid "configure %s"
-#~ msgstr "configura %s"
-
-#~ msgid "protocol = "
-#~ msgstr "protocol = "
-
-#~ msgid "Gnome Workstation"
-#~ msgstr "Estació de treball GNOME"
-
-#~ msgid "%s="
-#~ msgstr "%s="
-
-#~ msgid "add"
-#~ msgstr "afegeix"
-
-#
-#~ msgid "edit"
-#~ msgstr "edita"
-
-#
-#~ msgid "remove"
-#~ msgstr "elimina"
-
-#~ msgid ""
-#~ "The free download version does not include commercial software, and "
-#~ "therefore may not work with certain proprietary network cards and video "
-#~ "cards such as NVIDIA® nForce. To avoid possible compatibiity issues with "
-#~ "these devices, we recommend the purchase of one of our retail products "
-#~ "that includes commercial drivers and additional software."
-#~ msgstr ""
-#~ "Aquesta versió de descàrrega gratuïta no inclou programes comercials, i "
-#~ "per tant pot no funcionar amb targetes de xarxa i vídeo propietàries com  "
-#~ "NVIDIA(r) nForce. Per tal d'evitar possibles problemes de compatibilitat "
-#~ "amb aquests dispositius, recomanem la compra d'un dels productes "
-#~ "comercials que inclouen programes addicionals així com controladors "
-#~ "comercials."
-
-#~ msgid "Running \"%s\" ..."
-#~ msgstr "S'està executant \"%s\"..."
-
-#~ msgid "utopia 25"
-#~ msgstr "utopia 25"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
deleted file mode 100644
index e54d2a29b..000000000
--- a/perl-install/share/po/cs.po
+++ /dev/null
@@ -1,26827 +0,0 @@
-# Translation of cs.po to Czech
-# Translation of DrakX-cs.po to Czech
-# Copyright (C) 1999,2003, 2004, 2005 Free Software Foundation, Inc.
-# Radek Vybiral <Radek.Vybiral@vsb.cz>, 2000, 2001-2003.
-# Michal Bukovjan <bukm@centrum.cz>, 2002-2003, 2004, 2005.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: cs\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-04-02 10:06+0200\n"
-"Last-Translator: Michal Bukovjan <bukm@centrum.cz>\n"
-"Language-Team: Czech <cs@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms:  nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
-"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
-"X-Generator: KBabel 1.9.1\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Který USB disk chcete formátovat?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-"Chystáte se formátovat USB zařízení \"%s\", což na něm vymaže všechna data.\n"
-"Ujistěte se, že zvolené zařízení skutečně odpovídá tomu, které chcete "
-"formátovat.\n"
-"Při této operaci doporučujeme odpojit všechna ostatní paměťová USB zařízení."
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "Na USB disk nelze zapisovat"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-"Tento USB disk má zřejmě zapnutu ochranu proti zápisu. Prosím\n"
-"vyjměte jej, odstraňte ochranu proti zápisu a zasuňte jej zpět."
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Zkusit znova"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "Pokračovat bez USB disku"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-"Tento USB disk má zřejmě zapnutu ochranu proti zápisu, nelze jej ale\n"
-"nyní bezpečně odpojit.\n"
-"\n"
-"\n"
-"Stiskněte tlačítko pro restart počítače, disk vyjměte, odstraňte ochranu "
-"proti\n"
-"zápisu, zasuňte disk zpět a spusťte znovu systém Mandriva Move."
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Restartovat"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Váš USB disk neobsahuje platný oddíl s FAT.\n"
-"Jeden takový oddíl je třeba, aby bylo možné pokračovat (je to navíc "
-"standardní\n"
-"postup, aby bylo možné přesouvat a přistupovat k souborům z počítačů,\n"
-"na kterých jsou Windows). Zasuňte prosím USB disk, který obsahuje\n"
-"oddíl ve formátu FAT.\n"
-"\n"
-"\n"
-"Můžete také pokračovat bez USB disku - stále pak můžete používat\n"
-"vaši distribuci Mandriva Move jako běžný produkční operační\n"
-"systém."
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Na vašem systému nebyl nalezen žádný USB disk. Pokud nyní\n"
-"zasunete USB disk, Mandriva Move bude mít možnost transparentně\n"
-"ukládat data ve vašem domovském adresáři a systémová nastavení,\n"
-"která pak budou dostupná při dalším startu tohoto nebo jiného\n"
-"počítače. Poznámka: pokud disk zasunete teď, počkejte před dalším\n"
-"hledáním několik sekund .\n"
-"\n"
-"\n"
-"Můžete také pokračovat bez USB disku - stále pak můžete používat\n"
-"vaši distribuci Mandriva Move jako běžný produkční operační\n"
-"systém."
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "Pro uložení vašich dat je potřeba disk"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "Hledat USB disk znovu"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "Nastavuje se USB disk"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr ""
-"Čekejte prosím, nastavuji systémové soubory s nastavením na USB disku..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr "Zadejte informace o uživateli, heslo bude použito pro šetřič obrazovky"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Automatické nastavení"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Čekejte prosím, vyhledávám a nastavuji zařízení..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Chyba"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Stala se chyba, ale nevím, jak jí správně interpretovat.\n"
-"Pokračujte na vlastní riziko."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Stala se chyba"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-"Vyskytla se chyba:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"Tato chyba může pocházet z narušených systémových\n"
-"souborů s nastavením na USB disku; v tomto případě by problém\n"
-"vyřešilo odstranění těchto souborů a znovuzavedení systému\n"
-"Mandriva Move. Chcete-li tak učinit, stiskněte odpovídající tlačítko.\n"
-"\n"
-"\n"
-"Můžete také systém restartovat a vyjmout USB disk, nebo si\n"
-"prohlédnout jeho obsah pod jiným operačním systémem nebo \n"
-"se podívat na soubory se záznamy na konzoli #3 a #4 a zkusit\n"
-"zjistit, co se děje."
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "Odstranit systémové soubory s nastavením"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "Pouze restartovat"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "Lze pouze běžet bez podpory CDROM"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Ukončit tyto programy"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "Bez podpory CDROM"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Čtěte pozorně!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"Nelze použít jiný CDROM, pokud běží následující programy:\n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "Kopíruji do paměti, aby bylo možné odstranit CDROM"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB nebo více"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X server"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Zvolte X server"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Konfigurace dvou monitorů"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Váš systém podporuje zobrazení na dvou monitorech.\n"
-"Co chcete dělat?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Nelze nainstalovat balíček Xorg: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Vyberte velikost paměti vaší grafické karty"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Nastavení Xorg"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Které Xorg by jste chtěli použít?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigurovat všechny monitory nezávisle"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Použít rozšíření Xinerama"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigurovat pouze kartu \"%s\"%s"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s s hardwarovou 3D akcelerací"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "S Xorg %s může vaše karta využít 3D hardwarové akcelerace."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s s EXPERIMENTÁLNÍ 3D hardwarovou akcelerací"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"S Xorg %s může vaše karta využít 3D hardwarové akcelerace.\n"
-" TOTO JE POUZE EXPERIMENTÁLNÍ VERZE, A MŮŽE VÉST K NESTABILITĚ SYSTÉMU."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Vlastní"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Konec"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Grafická karta"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Rozlišení"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Test"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Volby"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr "Váš soubor s nastavením X.org je poškozený, bude ignorován."
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Zachovat změny?\n"
-"Aktuální konfigurace je:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Zvolte monitor pro výstup č. %d"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Zvolte typ monitoru"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Obecný"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Dodavatel"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Plug'n Play detekce selhala. Vyberte prosím přesný monitor"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Dva rozhodující parametry jsou: vertikální synchronizační frekvence, což je\n"
-"frekvence, kterou je obnovována celá obrazovka, a frekvence řádkové\n"
-" synchronizace (horiz. sync. rate), což je frekvence jakou jsou zobrazovány\n"
-"jednotlivé mikrořádky (scanline).\n"
-"\n"
-"Je VELMI DŮLEŽITÉ abyste nezvolili typ monitoru se schopnostmi vyššími než "
-"má\n"
-"váš monitor, protože byste si ho tím mohli poškodit. Jestliže si nejste "
-"jistí\n"
-"zvolte raději typ s nižšími schopnostmi."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontální(řádková) synchronizace"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikální(obrazovková) synchronizace"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 barev (8 bitů)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tisíc barev (15 bitů)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tisíc barev (16 bitů)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miliónů barev (24 bitů)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Rozlišení"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Další"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Vyberte si rozlišení a barevnou hloubku"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafická karta: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "Ok"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Zrušit"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Nápověda"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Vyzkoušet nastavení"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Chcete si vyzkoušet nastavení?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Varování: test na této grafické kartě může způsobit zatuhnutí počítače"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Vyskytla se chyba:\n"
-"%s\n"
-"Zkuste změnit některé parametry"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Test skončí za %d sekund"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Je toto správné nastavení?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Rozložení klávesnice: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Typ myši: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Přípojení myši: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Horizontální frekvence monitoru: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Vertikální frekvence monitoru: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafická karta: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Paměť na gr. kartě: %s kB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Barevná hloubka: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Rozlišení: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg ovladač: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Spouští se X"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Můžu nastavit váš počítač tak, aby automaticky spustil X při startu.\n"
-"Chcete aby počítač po zapnutí spustil grafický režim?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Vaše grafická karta zřejmě disponuje konektorem pro TV-OUT.\n"
-"Tento konektor může být zprovozněn použitím tzv. frame bufferu.\n"
-"\n"
-"Aby to bylo možné, budete muset napojit svou grafickou kartu na televizní "
-"přijímač, a to ještě než zapnete váš počítač.\n"
-"Poté vyberte ve vašem zavaděči položku \"TV out\".\n"
-"\n"
-"Má vaše karta tuto vlastnost?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Jakou normu váš televizor používá?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr "jiné"
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Prosím počkejte"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Probíhá instalace zaváděcího programu"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-"LILO se chystá přiřadit zařízení %s nové ID svazku (Volume ID). Změna\n"
-"ID svazku zaváděcího disku je pokládána operačními systémy Windows NT,\n"
-"2000, nebo XP za fatální chybu.\n"
-"Toto varování se nevztahuje na operační systémy Windows 95 a 98 nebo\n"
-"na datové disky Windows NT.\n"
-"\n"
-"Přiřadit nové ID svazku?"
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Instalace zaváděcího programu neuspěla. Stala se tato chyba:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Můžete potřebovat změnit startovací zařízení pro Open Firmware\n"
-" pro aktivaci spouštěcího programu. Pokud nevidíte po spuštění prompt,\n"
-" stiskněte při startu Command-Option-O-F a zadejte:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Potom zadejte: shut-down\n"
-"Při dalším spuštění už uvidíte prompt."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Rozhodli jste se nainstalovat zavaděč systému na oddíl.\n"
-"To znamená, že již zavaděč na disku, ze kterého spouštíte systém nějaký je "
-"(např. System Commander).\n"
-"\n"
-"Ze kterého disku spouštíte systém?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "První sektor disku (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "První sektor kořenového oddílu"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Na disketu"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Přeskočit"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "Instalace LILO/Grub"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Kam chcete nainstalovat zaváděcí program?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Nastavení stylu zavádění"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Základní nastavení zaváděcího programu"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Zadejte velikost paměti v MB"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Volba ''Omezení nastavení z příkazové řádky'' je bezpředmětné bez hesla"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Hesla nejsou shodná"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Zkuste to znovu, prosím"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Zaváděcí program"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Startovací zařízení"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Prodleva před automatickým spuštěním"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Povolit ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "Vnutit volbu No APIC"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "Vnutit volbu No Local APIC"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Heslo"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Heslo (podruhé)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Omezení nastavení z příkazové řádky"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "omezení"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Vyčistit adresář /tmp při každém startu"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Pokud je třeba, upřesněte velikost paměti (nalezeno %d MB)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Úvodní zpráva"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Prodleva pro firmware"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Prodleva při spuštění"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Povolit spuštění z CD?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Povolit zavaděč OF?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "Výchozí OS?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Obraz(image)"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Kořenový(root)"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Připojit"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Textový režim"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "Síťový profil"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Značka"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Výchozí"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-velikost"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "Bez Videa"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Prázdná značka není povolena"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Musíte zadat soubor s jádrem"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Musíte zadat kořenový oddíl"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Tato značka se již používá"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Jaký typ záznamu chcete přidat?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Jiný systém (SunOs...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Jiný systém (MacOs...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Jiný systém (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Tady jsou všechny záznamy.\n"
-"Můžete přidat další nebo změnit stávající."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "přístup k programům v X prostředí"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "přístup k rpm nástrojům"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "povolit \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "přístup k administrativním souborům"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "přístup k síťovým nástrojům"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "přístup k nástrojům pro kompilaci"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(už byl přidán %s)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Toto heslo je příliš jednoduché"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Prosím zadejte uživatelské jméno"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Uživatelské jméno může obsahovat pouze malá písmena, čísla, '-' a '_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Toto uživatelské jméno je příliš dlouhé"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Toto uživatelské jméno už bylo přidáno"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Přidat uživatele"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Zadejte uživatele\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Hotovo"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Vytvořit uživatele"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Skutečné jméno"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Přihlašovací jméno"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Shell"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Ikona"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Automatické přihlášení"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Můžu nastavit váš počítač tak, aby automaticky přihlásil vybraného uživatele."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Chcete použít tuto vlastnost?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Ano"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Ne"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Zvolte standardního uživatele:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Vyberte si, který správce oken má být spouštěn:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Prosím zvolte si jazyk, který chcete používat."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "Výběr jazyka"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Mandriva Linux podporuje více jazyků. Můžete si zvolit další jazyky,\n"
-"které budou dostupné po instalaci a následném restartu systému."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Použít Unicode jako výchozí"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Všechny jazyky"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Země"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Vyberte si prosím svoji zem."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Zde je kompletní seznam dostupných zemí"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "Jiné země"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Rozšíření"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "Vstupní metoda:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Žádné"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Nesdílet"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Povolit všem uživatelům"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Chcete povolit uživatelům, aby si mohli sdílet adresáře ve svém domovském "
-"adresáři?\n"
-"Pokud to povolíte, uživatelům stačí pouze klepnout na \"Sdílet\" v "
-"aplikacích Konqueror a Nautilus.\n"
-"\n"
-"Lze také provést \"Vlastní\" povolení pro jednotlivé uživatele.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-"NFS: tradiční systém pro sdílení souborů v prostředí Unix, s menší podporou "
-"operačních systémů Mac a Windows."
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-"SMB: systém pro sdílení souborů používaný ve Windows, MacOS X a mnohými "
-"moderními Linuxovými systémy."
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-"Nyní lze provést export přes protokol NFS nebo SMB. Vyberte prosím, který "
-"chcete použít."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Spustit UserDrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Zavřít"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Sdílení mezi uživateli používá skupinu \"fileshare\". \n"
-"Uživatele lze do této skupiny přidat pomocí nástroje UserDrake."
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Lokální soubor"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr "Čipová karta"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Doména Windows"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr "Active Directory s SFU"
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr "Active Directory s Winbind"
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "Lokální soubor:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-"Všechno ověřování a ukládání informací o uživateli budou probíhat na "
-"lokálním souboru"
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-"Některé nebo veškeré ověřování bude používat LDAP. LDAP sdružuje některé "
-"informace uvnitř vaší organizace."
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-"Umožňuje provozovat skupinu počítačů ve stejné doméně NIS (Network "
-"Information Service) se společným heslem a skupinami."
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Doména Windows:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-"Winbind umožňuje systému získat informace a ověřovat uživatele v doméně "
-"Windows."
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr "Active Directory s SFU:"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr "Kerberos je bezpečný systém pro poskytování služeb síťového ověřování."
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Active Directory s Winbind:"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Ověření pomocí LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "Základní dn pro LDAP"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP server"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "jednoduchý"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr "bezpečnostní schéma (SASL/Kerberos)"
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr "Ověření pomocí Active Directory"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Doména"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Server"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "Databáze uživatelů LDAP"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr "Použít anonymní BIND "
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr "Uživatelé z databáze LDAP, kteří mohou prohlížet Active Directory"
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr "Heslo pro uživatele"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Šifrování"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Ověření pomocí NIS"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS Doména"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS Server"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Aby toto správně pracovalo se serverem W2K PDC, bude muset správce serveru "
-"spustit: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
-"everyone / add a restartovat server.\n"
-"Budete také potřebovat uživatelské jméno a heslo Správce Domény, abyste "
-"mohli připojit počítač do domény Windows(TM).\n"
-"Jestliže ještě není povolena síť, aplikace DrakX se pokusí připojit k doméně "
-"po fázi nastavení sítě.\n"
-"Pakliže toto nastavení z jakéhokoli důvodu selže, a ověření na PDC nebude "
-"pracovat správně, spusťte po naběhnutí systému 'smbpasswd -j DOMAIN -U USER%%"
-"PASSWORD' (použijte svou doménu Windows(TM) a uživatelské jméno a heslo "
-"Správce domény).\n"
-"Příkaz 'wbinfo -t' otestuje, zda-li vaše tajné informace pro ověření jsou "
-"správné."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Doména Windows pro ověření"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Uživatelské jméno Správce domény"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Heslo Správce domény"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr "Použít ldmap pro uložení UID/SID "
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr "Výchozí ldmap "
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr "Nastavení hesla správce (uživatele root) a režimy pro síťové ověřování"
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr "Heslo správce (uživatele root)"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Autentizační metoda"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Bez hesla"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Toto heslo je příliš jednoduché (musí být alespoň %d znaků dlouhé)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Ověření"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "Nelze použít všesměrové vysílání bez NIS domény"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Vita vas program pro vyber operacniho systemu!\n"
-"\n"
-"Vyberte si ze seznamu operacnich systemu nize nebo\n"
-"vyckejte na automaticke zavedeni.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO s grafickou nabídkou"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO s textovou nabídkou"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "není dost místa v adresáři /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Zaváděcí program nelze nainstalovat na oddíl %s\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-"Nastavení vašeho zavaděče musí být aktualizováno, protože se změnilo pořadí "
-"oddílů na disku"
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"Zavaděč nelze korektně nainstalovat. Musíte použít rescue režim a vybrat \"%s"
-"\""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "Znovu instalovat zaváděcí program"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "kB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d minut(y)"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 minuta"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekund"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "chybí kdesu"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "chybí consolehelper"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Rakousko"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Austrálie"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Belgie"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brazílie"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Kanada"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Švýcarsko"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Česká republika"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Německo"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Dánsko"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estonsko"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Španělsko"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finsko"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Francie"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Řecko"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Maďarsko"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Irsko"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Izrael"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Itálie"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Japonsko"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Nizozemí"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Norsko"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Nový Zéland"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Polsko"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portugalsko"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rusko"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Švédsko"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slovensko"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Thajsko"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Jižní Afrika"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Spojené státy americké"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV je protokol, který umožňuje připojit webový adresář jako lokální, "
-"který\n"
-"se potom tváří jako lokální souborový systém (takový webový server musí "
-"být)\n"
-"nastaven jako WebDAV server). Pokud chcete přidat WebDAV připojení, vyberte\n"
-"položku \"Nový\"."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Nový"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Odpojit"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Připojit"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Přípojný bod"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Zadejte prosím URL serveru WebDAV"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL musí začínat znaky http:// nebo https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Server: "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Adresář připojení (mount point): "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Volby: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Zálohujte si nejdřív svá data, prosím"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Jestliže chcete používat aboot, musíte nechat volné místo na začátku disku\n"
-"(2048 sektorů stačí)"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Průvodce"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Volba akce"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Máte jeden veliký oddíl\n"
-"(většinou používaný Microsoft Windows).\n"
-"Doporučuji vám nejprve zmenšit tento oddíl\n"
-"(klepněte na něj a potom na \"Změnit velikost\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Prosím klepněte na oddíl"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Detaily"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Nenalezeny žádné pevné disky"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Žurnálovací FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Odkládací (swap)"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOs"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Prázdný"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Souborové systémy:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Místo toho použijte ''%s''"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Vytvořit"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Změnit typ"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Smazat"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Nejprve použijte ''Odpojit''"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Vybrat jiný oddíl"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Vyberte oddíl"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Konec"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Zpět"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Přepnout se do módu 'normální'"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Přepnout se do režimu 'expert'"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Přesto chcete pokračovat?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-"Měli byste naformátovat oddíl %s.\n"
-"Jinak nebude do tabulky fstab zapsána položka pro přípojný bod %s.\n"
-"Chcete přesto skončit?"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Konec bez uložení"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Chcete skončit bez zapsání do tabulky oddílů?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Chcete uložit úpravy souboru /etc/fstab?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Aby se projevily změny v tabulce oddílů, musíte restartovat počítač"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Vše smazat"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Automaticky rozmístit"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Více"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Informace o pevném disku"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Všechny primární oddíly (partitions) jsou používány"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Nemůžu přidat žádný další oddíl"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Abyste mohli mít více oddílů, musíte smazat jeden existující a na jeho "
-"místě\n"
-"vytvořit rozšířený (extended) oddíl"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr "Bez supermountu"
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr "Supermount"
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr "Supermount vyjma jednotek CDROM"
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Uložit tabulku oddílů"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Obnovit tabulku oddílů"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Záchrana tabulky oddílů"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Znovu načíst tabulku oddílů"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Automatické připojování pro vyjímatelná média"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Zvolit soubor"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Záložní tabulka oddílů nemá stejnou velikost\n"
-"Chcete přesto pokračovat?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Pokouším se obnovit tabulku oddílů"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Podrobné informace"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Změnit velikost"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Formátovat"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Přidat do RAIDu"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Přidat do LVMu"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Odebrat z RAIDu"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Odebrat z LVMu"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Změnit RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Použít loopback"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Vytvořit nový oddíl"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Počáteční sektor: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Velikost v MB: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Souborový systém: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Nastavení: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Název logického svazku "
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"Nemůžete vytvořit nový oddíl\n"
-"(protože jste již dosáhli maximálního počtu primárních oddílů).\n"
-"Nejprve odstraňte některý primární oddíl a vytvořte oddíl rozšířený."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Odstranit soubor loopbacku?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Tím, že změníte typ oddílu %s, přijdete o všechna jeho data"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Změnit typ oddílu"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Který souborový systém chcete použít?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Přepínám z ext2 na ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Kam chcete připojit loopback soubor %s?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kam chcete připojit zařízení %s?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Nemůžu smazat přípojný bod, protože tento oddíl je používán pro loopback.\n"
-"Odstraňte nejprve loopback"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Kam chcete připojit %s?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Měním velikost"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Počítám hranice souborového systému fat"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Na tomto diskovém oddílu nelze měnit velikost"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Všechna data z tohoto oddílu by měla být zálohována"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Když změníte velikost oddílu %s, ztratíte tím všechna jeho data"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Zvolte novou velikost"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Nová velikost v MB: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"Pro zachování integrity po provedené změně velikosti oddílu(ů) bude při\n"
-"dalším spuštění systému Windows provedena kontrola souborového systému."
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Zvolte existující RAID pro přidání"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "nový"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Zvolte existující LVM pro přidání"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "Název pro LVM?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Tento oddíl nemůže být použit pro loopback"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Název souboru loopbacku:"
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Zadejte název souboru"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Soubor už je používán jiným loopbackem, zvolte si jiný"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Soubor už existuje. Mám ho použít?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Volby pro připojení"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Další"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "zařízení"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "úroveň"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "velikost bloku v kB"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Buďte opatrní: tato akce je nebezpečná."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Jaký typ diskového oddílu?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Aby se změny uplatnily budete muset restartovat počítač"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Bude zapsána nová tabulka oddílů na disku %s!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Když naformátujete oddíl %s, ztratíte tím všechna jeho data"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Přesunout soubory na nový diskový oddíl"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Schovat soubory"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Adresář %s již obsahuje nějaká data\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Přesunuji soubory na nový diskový oddíl"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Kopíruji %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Odstraňuji %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "oddíl %s je nyní rozpoznán jako %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr "Oddíly byly přečíslovány: "
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Zařízení: "
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "Název Devfs: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr "Název svazku: "
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Písmeno v DOSu: %s (jenom odhad)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Typ: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Jméno: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Začátek: sektor %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Velikost: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorů"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Od cylindru %d do cylindru %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Naformátovaný\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Nenaformátovaný\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Připojený\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback soubor(y): \n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Standardní startovací oddíl\n"
-"    (pro MS-DOS, ne pro LILO)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Úroveň %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Velikost bloku (chunk) %d kB\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID disky %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback soubor: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Tento oddíl je oddíl\n"
-"s ovladači, je lepší\n"
-"no nechat neporušený.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Tento speciální Bootstrap\n"
-"oddíl je pro spuštění\n"
-"dalšího systému.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Pouze pro čtení"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Velikost: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s cylindrů, %s hlav, %s sektorů\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Informace: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM disky %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Typ tabulky oddílů: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "na kanále %d id %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Klíč pro šifrovaný souborový systém"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Vyberte si šifrovací klíč pro souborový systém"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Tento šifrovací klíč je příliš jednoduchý (musí být alespoň %d znaků dlouhý)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Šifrovací klíče se neshodují"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Šifrovací klíč"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Šifrovací klíč (znovu)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Šifrovací algoritmus"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Změnit typ"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "Nelze se přihlásit pod uživatelským jménem %s (chybné heslo?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Vyžadováno ověření Domény"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Které uživatelské jméno"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Další"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Prosím zadejte své uživatelské jméno, heslo a název domény, pod kterými "
-"chcete přistupovat k tomuto počítači."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Uživatelské jméno"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Vyhledat servery"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Vyhledat nové servery"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Balíček %s musí být nainstalován. Chcete ho nainstalovat?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Chybí potřebný balíček %s"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Instaluji balíčky..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "Odstraňuji balíčky..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Připojuji oddíl %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "připojení oddílu %s v adresáři %s selhalo"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Kontroluji %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "chyba odpojování %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Aktivuji odkládací oddíl %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formátuji oddíl %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Vytvářím a formátuji soubor %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "nevím jak naformátovat %s na typ %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formátování %s skončilo chybou"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"Neaktualizovat čas přístupu pro tento souborový systém\n"
-"(např. pro rychlejší přístup k frontě zpráv při provozování diskusního "
-"serveru)."
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"Lze připojit pouze explicitně (tj. volba -a\n"
-"způsobí, že souborový systém nebude připojen)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-"Neinterpretovat speciální znaková či bloková zařízení na souborovém systému."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"Nepovolit spouštění jakýchkoliv binárních souborů na připojeném\n"
-"souborovém systému. Tato volba je užitečná v případě, že na serveru\n"
-"je souborový systém, který obsahuje binární aplikace pro jinou architekturu\n"
-"než je vlastní systém serveru."
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"Nepovolit vliv bitů set-user-identifier nebo set-group-identifier.\n"
-"(Není to nebezpečné, ale v případě, že máte instalovaný suidperl(1) to\n"
-"potenciálně nebezpečné být může.)"
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Připojit souborový systém pouze pro čtení."
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "Všechny vstupně/výstupní operace budou prováděny synchronně."
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"Povolí běžným uživatelům připojovat souborové systémy. Jméno uživatele,\n"
-"který provedl připojení je zapsáno do souboru mtab, aby mohl souborový "
-"systém\n"
-"následně také odpojit. Tato volba zahrnuje volby noexec, nosuid a nodev\n"
-"(pokud nejsou přepsány jiný volbami, jako je user,exec,dev,suid )."
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "Umožnit zápis běžným uživatelům"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "Umožnit běžným uživatelům pouze čtení"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "Nemůžete použít JFS pro oddíl menší než 16MB"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "Nemůžete použít ReiserFS pro oddíl menší než 32MB"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "s /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "server"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Nemůžu přečíst vaši tabulku oddílů zařízení %s, je pro mě příliš porušená :"
-"(\n"
-"Můžu se pokusit pokračovat v čištění špatných oddílů (VŠECHNA\n"
-"DATA budou ztracena!). Jiná možnost je zakázat DrakX měnit tabulku\n"
-"oddílů (chyba je %s)\n"
-"\n"
-"Souhlasíte s tím, že přijdete o všechny oddíly?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Přípojné body (mount points) musí začínat '/'"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Název přípojného bodu může obsahovat pouze písmena a číslice"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Oddíl s přípojným bodem %s už existuje\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Zvolili jste softwarový RAID oddíl jako kořenový oddíl (/).\n"
-"S tím se není schopný vypořádat žádný zaváděcí program bez použití oddílu\n"
-"/boot. Ujistěte se prosím, že jste tento oddíl přidali"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "Nelze použít LVM Logického disku na připojený bod %s"
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Zvolili jste logický svazek LVM jako kořenový oddíl (/).\n"
-"Zaváděcí program se s tím není schopen vypořádat bez použití oddílu\n"
-"/boot. Ujistěte se prosím, že jste oddíl /boot přidali"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-"Nebudete moc nainstalovat zavaděč lilo (protože lilo nemůže zpracovat LV na "
-"více PV)"
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Tento adresář musí kromě kořenového souborového systému zůstat"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Pro tento přípojný bod potřebujete opravdový souborový systém (ext2/ext3, "
-"reiserFS, XFS nebo JFS)\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "Nelze použít kryptovaný souborový systém na připojený bod %s"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Pro automatické rozdělení disku není dostatek místa"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Nic nedělat"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Disketa"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Hard Disk"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CDROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD vypalovačky"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Páska"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Grafická karta"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "TV karta"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Další multimediální zařízení"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Zvuková karta"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Webová kamera"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Procesory"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "Adaptéry ISDN"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernetová karta"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "Adaptéry ADSL"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Paměť"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "AGP řadiče"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Tiskárna"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Joystick"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA řadiče"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAID řadiče"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA řadiče"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire řadiče"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCIA řadiče"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI řadiče"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "USB řadiče"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "USB porty"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus řadiče"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Systémové řadiče a můstky"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Klávesnice"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Myš"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Skener"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Neznámý/Jiný"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu #"
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Čekejte prosím... Aktivuji konfiguraci"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Bez alternativního ovladače"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Pro vaši zvukovou kartu (%s), která nyní používá ovladač \"%s\", není žádný "
-"známý OSS/ALSA alternativní ovladač."
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Nastavení zvuku"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Zde si pro vaši zvukovou (%s) kartu můžete vybrat alternativní ovladač (buď "
-"OSS nebo ALSA)"
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Vaše karta nyní používá ovladač %s\"%s\" (výchozí ovladač pro vaši kartu je "
-"\"%s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) bylo první API pro zvuk. Není to API nezávislé na OS "
-"(je dostupné ve více unixových systémech), ale má pouze základní funkce a "
-"omezené API.\n"
-"A co více, všechny OSS ovladače \"vynalézají znovu kolo\".\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) je modulární architektura, která "
-"která podporuje daleko více ISA, USB a PCI karet.\n"
-"\n"
-"Také poskytuje daleko lepší API než OSS.\n"
-"\n"
-"Pokud chcete použít alsa ovladače, můžete použít dva režimy:\n"
-"- starší režim kompatibility s OSS API\n"
-"- nové ALSA API, které poskytuje daleko více možností, ale vyžaduje použít "
-"knihovnu ALSA.\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Ovladač:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Řešení problémů"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Varování"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"Starší ovladač \"%s\" je na černé listině.\n"
-"\n"
-"Bylo u něj zjištěno, že při odebrání způsobí pád jádra.\n"
-"\n"
-"Při dalším spuštění bude použit pouze nový ovladač \"%s\" "
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Není dostupný žádný open source ovladač"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Pro vaši zvukovou kartu (%s) není žádný vhodný volně použitelný ovladač, ale "
-"existuje alternativní proprietární ovladač na \"%s\"."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Nebyl rozpoznán žádný ovladač"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Pro vaši zvukovou kartu (%s) není žádný známý ovladač"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Neznámý ovladač"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Chyba: Ovladač \"%s\" pro vaši zvukovou kartu není na seznamu"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Řešení problémů se zvukem"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Klasický postup při řešení problémů se zvukem je pomocí těchto příkazů:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" vám řekne, jaký ovladač je výchozí pro\n"
-"danou zvukovou kartu\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" vám řekne, který ovladač se nyní\n"
-"používá\n"
-"\n"
-"- \"/sbin/lsmod\" provede kontrolu toho, zda modul (ovladač) je nahrán nebo "
-"ne\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" vám "
-"sdělí\n"
-"zda je pro initlevel nastaveny služby alsa a sound\n"
-"\n"
-"- \"aumix -q\" vám řekne, zda je zvuk ztlumen nebo ne\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" vám řekne, který program používá zvukovou "
-"kartu.\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Umožnit výběr ovladače"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Výběr libovolného ovladače"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Pokud skutečně víte, který ovladač je ten správný pro vaši kartu,\n"
-"můžete ho vybrat ze seznamu.\n"
-"\n"
-"Aktuální ovladač pro vaši zvukovou kartu \"%s\" je \"%s\"."
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Autodetekce"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Neznámá|Obecná"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Neznámá|CPH05X (bt878) [více dodavatelů]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Neznámá|CPH06X (bt878) [více dodavatelů]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Modul bttv jádra operačního systému GNU/Linux nalezne správné parametry "
-"automaticky pro většinu moderních TV karet.\n"
-"Je-li vaše karta špatně detekována, lze zde ručně nastavit správný typ karty "
-"a tuneru. Pokud je to potřeba, vyberte také parametry vaší TV karty."
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Model karty:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Typ tuneru:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "Počet bufferů pro zachycení:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Počet bufferů pro zachycení systémem mmap"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "Nastavení PLL:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Podpora rádia:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "Zapnout podporu rádia"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Předtím, než budete pokračovat, přečtěte si pozorně licenční podmínky. Ty\n"
-"se vztahují k celé distribuci Mandriva Linux a pokud s nimi souhlasíte,\n"
-"klepněte na tlačítko \"%s\". Pokud ne, klepněte na tlačítko \"%s \" a "
-"počítač bude restartován."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Přijmout"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"GNU/Linux je víceuživatelský systém, což znamená, že každý uživatel může\n"
-"mít své vlastní nastavení, soubory atd. Více se dočtete v příručce \"Začínáme"
-"\".\n"
-"Na rozdíl od uživatele root, který je správcem počítače, uživatelé, kteří "
-"jsou\n"
-"zde vytvořeni, nemají oprávnění měnit nic kromě svých vlastních souborů a\n"
-"nastavení. Doporučuje se vytvořit účet pro minimálně jednoho běžného "
-"uživatele.\n"
-"Tento účet se používá na všechny běžné úkoly. Ačkoliv je velmi praktické\n"
-"přihlašovat se každý den jako uživatel root, je to také velmi nebezpečné!\n"
-"Jedna malá chyba může způsobit, že celý operační systém již nebude funkční.\n"
-"Pokud uděláte chybu jako normální uživatel, můžete přijít pouze o své "
-"informace,\n"
-"ale nepoškodí se celý systém.\n"
-"\n"
-"Jako první zadejte vaše skutečné jméno. To není samozřejmě povinné - můžete\n"
-"zadat co chcete. Aplikace DrakX použije první slovo jako uživatelské jméno,\n"
-"pod kterým se bude uživatel hlásit do systému, a předvyplní jej do políčka\n"
-"\"%s\". To je možné následně změnit.\n"
-"Dále se zadává heslo pro uživatele. Volba hesla pro normální uživatele sice "
-"není\n"
-"z hlediska bezpečnosti tak kritická jako v případě správce, ale i tak se "
-"doporučuje\n"
-"ji nepodceňovat; koneckonců, jde o zabezpečení souborů tohoto uživatele.\n"
-"\n"
-"Pokud klepnete na \"%s\", můžete přidávat uživatelů, kolik\n"
-"potřebujete, např. své přátele, účet pro otce či sestru. Pokud máte všechny\n"
-"uživatele vytvořeny, klepněte na tlačítko \"%s\". \n"
-"\n"
-"Klepnutím na tlačítko \"%s\" můžete pro nový účet změnit shell, který\n"
-"bude uživatel používat (výchozí je bash).\n"
-"\n"
-"Až dokončíte přidávání uživatelů, budete dotázáni na to, jaký uživatel má "
-"být\n"
-"zvolen pro automatické přihlášení do systému po jeho spuštění. Pokud chcete\n"
-"tuto možnost využít (a neobáváte se o bezpečnost), vyberte požadovaného\n"
-"uživatele a správce oken a klepněte na \"%s\".\n"
-"Pokud tuto možnost nechcete využít, odškrtněte políčko \"%s\"."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Uživatelské jméno"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Další"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Zde je vypsán seznam již existujících detekovaných oddílů na pevném disku.\n"
-"Můžete ponechat volby detekované průvodcem, protože ve většině případů\n"
-"vyhovují. Pokud chcete provést nějaké změny, musíte definovat aspoň "
-"kořenový\n"
-"oddíl (\"/\"). Velikost oddílů zvolte dostatečnou, jinak nebude možné "
-"nainstalovat\n"
-"dostatečné množství programů. Pokud chcete ukládat data na zvláštní oddíl,\n"
-"vytvořte také oddíl \"/home\".\n"
-"\n"
-"Každý oddíl vypsaný níže má: \"Název\", \"Velikost\".\n"
-"\n"
-"\"Název\" je složen následovně: \"typ pevného disku\", \"číslo disku\",\n"
-"\"číslo oddílu\". (například \"hda1\").\n"
-"\n"
-"Pokud máte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud máte SCSI,\n"
-"označení bude \"sd\".\n"
-"\n"
-"\"Číslo disku\" je vždy písmeno za \"hd\" nebo \"sd\". Pro IDE disky je to "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE řadiči\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE řadiči\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE řadiči\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE řadiči\".\n"
-"\n"
-"Pro SCSI disky platí, že \"a\" je \"nejmenší SCSI ID\", \"b\" je \"druhé\n"
-"nejmenší SCSI ID\" atd."
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Distribuce Mandriva Linux je složena z několika CD. Instalační program ví,\n"
-"na kterém disku je umístěn jaký balíček a v případě potřeby vysune CD a "
-"vyžádá\n"
-"si výměnu CD za požadované. Pokud nemáte požadované CD po ruce, klikněte\n"
-"na \"%s\" a odpovídající balíčky nebudou nainstalovány."
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"V této chvíli je možné vybrat, které programy chcete nainstalovat na váš "
-"systém.\n"
-"Mandriva Linux obsahuje tisíce balíčků s programy a pro snadnější orientaci\n"
-"byly rozděleny do skupin, které sdružují podobné aplikace.\n"
-"\n"
-"Balíčky jsou rozděleny do skupin, které odpovídají tomu, jak je nejčastěji\n"
-"počítač používán. Skupiny samotné jsou umístěny do čtyř sekcí. Výběr "
-"aplikací\n"
-"z těchto sekcí lze různě kombinovat, takže můžete mít celou instalovánu "
-"sekci\n"
-"\"Pracovní stanice\" a k ní nějaké aplikace ze sekce \"Server\".\n"
-"\n"
-" * \"%s\": pokud plánujete používat počítač převážně na\n"
-"běžnou práci, vyberte si balíčky ze skupin kategorie pracovní stanice.\n"
-"\n"
-" * \"%s\": pokud budete na počítači programovat, můžete si z této\n"
-"sekce vybrat další skupiny. Zvláštní skupina \"LSB\" nastaví váš systém "
-"tak,\n"
-"aby co nejvíce odpovídal specifikaci Linux Standard Base.\n"
-"\n"
-"   Výběr skupiny \"LSB\" rovněž nainstaluje jádro řady \"2.4\" místo "
-"výchozího\n"
-"jádra řady \"2.6\", pro zajištění plné kompatibility se specifikací LSB. I "
-"když ale\n"
-"skupinu LSB nevyberete, bude systém téměř úplně specifikaci odpovídat.\n"
-"\n"
-" * \"%s\": pokud bude počítač provozován jako server, máte možnost\n"
-"vybrat si ty nejběžnější služby, které chcete nainstalovat.\n"
-"\n"
-" * \"%s\": pokud preferujete grafické prostředí, zde je\n"
-"nabídka několika prostředí, ze které si musíte vybrat nejméně jedno,\n"
-"aby bylo možné grafické prostředí nainstalovat.\n"
-"\n"
-"Pokud přejedete myší nad skupinou, objeví se krátký text, který vysvětluje,\n"
-"co je obsahem dané skupiny.\n"
-"\n"
-"Pokud zatrhnete volbu \"%s\", zobrazí se seznam všech\n"
-"balíčků, které je možno nainstalovat. To je to užitečné v případě, že "
-"chcete\n"
-"mít absolutní kontrolu nad tím, co se bude instalovat.\n"
-"\n"
-"Pokud jste spustili instalaci v režimu \"%s\", můžete zrušit výběr\n"
-"daných skupin, čímž zabráníte instalaci nových balíčků. To je užitečné\n"
-"pro případ opravy nebo aktualizace existujícího systému.\n"
-"\n"
-"Pokud nevyberete při běžné instalaci žádnou skupinu (na rozdíl od\n"
-"aktualizace), zobrazí se otázka na instalaci několika typů minimální\n"
-"instalace:\n"
-"\n"
-" * \"%s\" Provede instalaci minima balíčků s podporou grafického prostředí.\n"
-"\n"
-" * \"%s\" Nainstaluje systém se základními programy a jejich dokumentací. \n"
-"Tento typ je vhodný pro instalaci serveru.\n"
-"\n"
-" * \"%s\" Nainstaluje se opravdu nezbytné minimum, aby bylo\n"
-"možné provozovat Linux z příkazové řádky. Instalace zabere asi\n"
-"65MB."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Pracovní stanice"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Vývoj"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Grafické prostředí"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Výběr jednotlivých balíčků"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Aktualizovat"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "X prostředí"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Obsahuje základní dokumentaci"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Opravdu minimální instalace"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"V závislosti na tom, zda jste zvolili individuální výběr balíčků, se "
-"nabídne\n"
-"stromová struktura obsahující všechny balíčky organizované do skupin\n"
-"a podskupin. Při procházení stromu můžete vybrat jednotlivé balíčky, "
-"podskupiny\n"
-"nebo celé skupiny.\n"
-"\n"
-"Pokud vyberete ze stromu balíček, objeví se v pravé části jeho popis.\n"
-"\n"
-"!! Pokud se nachází mezi vybranými balíčky serverové programy, ať už "
-"vybrané\n"
-"záměrně nebo jako součást skupiny, zobrazí se dotaz na to,\n"
-"zda opravdu chcete tyto servery nainstalovat. V distribuci Mandriva Linux\n"
-"jsou tyto servery spuštěny při startu systému. I když v době vydání "
-"distribuce\n"
-"nejsou známy žádné bezpečnostní problémy, mohou se vyskytnout později.\n"
-"Pokud nevíte, k čemu jsou určeny některé serverové služby, klepněte na \"%s"
-"\".\n"
-"Klepnutím na \"%s\" se dané služby nainstalují a automaticky spustí při "
-"startu !!\n"
-"\n"
-"Volba \"%s\" vypne varovné hlášení, které se objeví\n"
-"vždy, když vyberete balíček, který má další závislosti a instalační program\n"
-"musí vybrat další potřebné balíčky, aby instalace mohla proběhnout úspěšně.\n"
-"\n"
-"Malá ikonka diskety dole umožňuje nahrát již předem vybraný seznam balíčků.\n"
-"To je užitečné, pokud máte několik počítače a chcete na nich shodnou "
-"instalaci.\n"
-"Po klepnutí na ikonu budete dotázáni na vložení diskety, která byla "
-"vytvořena na\n"
-"konci jiné instalace. Ve druhém tipu při posledním kroku najdete návod, jak "
-"si\n"
-"tuto disketu vytvořit. "
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "Ošetří automaticky závislosti"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": klepnutím na \"%s\" se otevře průvodce nastavením tiskárny.\n"
-"Jak nastavit tiskárnu se také dozvíte z odpovídající kapitoly z příručky\n"
-"\"Začínáme\". Rozhraní je podobné tomu, které vidíte při instalaci."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Nastavit"
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Nyní si zvolte, které služby mají být spuštěny při startu počítače.\n"
-"\n"
-"Je zde seznam všech služeb, které jsou aktuálně nainstalovány.\n"
-"Prohlédněte si seznam pozorně a zrušte ty, které nepotřebujete při startu\n"
-"počítače spouštět.\n"
-"\n"
-"Pokud přejedete myší nad některou položkou, objeví se malá nápověda\n"
-"s popisem, co daná služba dělá. Pokud přesně nevíte, zda je služba užitečná\n"
-"nebo ne, je lepší ji nechat ve výchozím stavu.\n"
-"\n"
-"!! Rozvažte, co za služby spustit, zvláště pokud budete počítač provozovat\n"
-"jako server: nepotřebujete všechny služby. Pamatujte, že čím více služeb\n"
-"je spuštěno, tím je větší nebezpečí nežádoucího proniknutí do počítače.\n"
-"Takže povolte opravdu jen ty služby, které nezbytně potřebujete !!"
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"GNU/Linux spravuje čas podle GMT (Greenwich Mean Time) a převádí ho na\n"
-"čas podle příslušné vybrané časové zóny. Pokud je čas na vaší mateřské "
-"desce\n"
-"nastaven jako lokální, je možné toto zrušit odznačením volby \"%s\" a pak "
-"budou\n"
-"systémové hodiny stejné jako hardwarové a ve stejné časové zóně.\n"
-"To je užitečné tehdy, když je na počítači jiný operační systém.\n"
-"\n"
-"Volba \"%s\" provádí automatické nastavení hodin pomocí připojení k "
-"časovému\n"
-"serveru na Internetu. Vyberte si v seznamu ten server, který je vám "
-"nejblíž.\n"
-"Je samozřejmé, že pro správnou funkci musíte mít funkční připojení\n"
-"k Internetu. Na počítač se také nainstaluje časový server, který mohou\n"
-"volitelně používat jiné počítače ve vaší lokální síti."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardwarové hodiny nastaveny na GMT"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Automatická synchronizace času"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"Grafická karta\n"
-"\n"
-"   Instalační program je schopen automaticky detekovat a nastavit grafickou\n"
-"kartu instalovanou v počítači. Pokud se to nepodaří, máte možnost si ze\n"
-"seznamu vybrat příslušnou grafickou kartu ručně.\n"
-"\n"
-"   V případě, že pro vaši kartu je možné použít více různých serverů, buď\n"
-"s 3D akcelerací nebo bez, je pouze na vás, který server si vyberete jako\n"
-"nejvíce vyhovující vašim potřebám."
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"X (X Window System) je srdcem grafického rozhraní pro GNU/Linux, které\n"
-"využívají dodávané grafické prostředí (KDE, GNOME, AfterStep, WindowMaker) "
-"se systémem Mandriva Linux.\n"
-"\n"
-"Nyní bude zobrazen seznam různých parametrů, které je možné změnit pro\n"
-"dosažení optimálního grafického zobrazení\n"
-"\n"
-"Grafická karta\n"
-"\n"
-"   Instalační program je schopen automaticky detekovat a nastavit grafickou\n"
-"kartu instalovanou v počítači. Pokud se to nepodaří, máte možnost si ze\n"
-"seznamu vybrat příslušnou grafickou kartu ručně.\n"
-"\n"
-"   V případě, že pro vaši kartu je možné použít více různých serverů, s 3D\n"
-"akcelerací nebo bez, je pouze na vás, který server si vyberete jako nejvíce\n"
-"vyhovující vašim potřebám.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Instalační program dokáže většinou automaticky detekovat a správně \n"
-"nastavit monitor připojený k vašemu počítači. Pokud se to nezdaří, lze se\n"
-"seznamu vybrat monitor, který máte.\n"
-"\n"
-"\n"
-"\n"
-"Rozlišení\n"
-"\n"
-"   Zde si můžete vybrat rozlišení a barevnou hloubku, které vaše karta \n"
-"podporuje. Vyberte si to co vám nejvíce vyhovuje (výběr lze po instalaci\n"
-"samozřejmě změnit). Na monitoru bude zobrazen příklad nastavení.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"  Systém se pokusí otestovat grafickou obrazovku v požadovaném rozlišení.\n"
-"Pokud během testu uvidíte zprávy a odpovíte na ni \"%s\", instalační "
-"program\n"
-"bude pokračovat dalším krokem. Pokud zprávu neuvidíte, znamená to, že "
-"některá\n"
-"část automatické detekce neproběhla v pořádku a test automaticky za 12 "
-"vteřin\n"
-"skončí s tím, že se provede návrat k základní nabídce. Následně je možné "
-"opět\n"
-"provést změny až do té doby, než bude zobrazeno správné rozlišení.\n"
-"\n"
-"\n"
-"\n"
-"Volby\n"
-"\n"
-"   Zde si můžete vybrat, zda chcete provést automatický start grafického\n"
-"prostředí po spuštění systému. Je samozřejmé, že pokud bude počítač\n"
-"provozován jako server nebo pokud se nepodařilo nastavit grafickou kartu,\n"
-"je nutné odpovědět \"%s\"."
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Monitor\n"
-"\n"
-"   Instalační program dokáže většinou automaticky detekovat a správně \n"
-"nastavit monitor připojený k vašemu počítači. Pokud se to nezdaří, lze si\n"
-"ze seznamu vybrat monitor, který máte."
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Rozlišení\n"
-"\n"
-"   Zde si můžete vybrat rozlišení a barevnou hloubku, které vaše karta \n"
-"podporuje. Vyberte si to, co vám nejvíce vyhovuje (výběr lze po instalaci\n"
-"samozřejmě změnit). Na monitoru bude zobrazen příklad nastavení."
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"V případě, že je pro vaši kartu možno použít více různých serverů s 3D\n"
-"akcelerací nebo bez, záleží na vašem výběru, který vám nejvíce vyhovuje."
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Volby\n"
-"\n"
-"   Tento krok vám umožňuje nastavit automatické spouštění grafického "
-"prostředí\n"
-"při startu. Je zřejmé, že odpovíte \"%s\" v případě, že počítač bude "
-"pracovat\n"
-"jako server nebo v případě, že se nepodařilo správně nastavit grafickou "
-"kartu."
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"V tomto bodě si musíte rozhodnout, na které diskové oddíly budete\n"
-"instalovat nový operační systém Mandriva Linux. Pokud je disk prázdný\n"
-"nebo existující operační systém používá celý disk, je nutné ho rozdělit.\n"
-"Rozdělení disku spočívá ve vytvoření volného prostoru pro instalaci\n"
-"systému Mandriva Linux.\n"
-"\n"
-"Protože rozdělení disku je nenávratná operace, je to velmi nebezpečná\n"
-"akce pro ty uživatele, kteří nemají žádné zkušenosti.\n"
-"Pro tyto uživatele je dobrý průvodce, který zjednoduší daný proces.\n"
-"Ještě před započetím rozdělování disku si pročtěte zbytek této sekce a "
-"hlavně\n"
-"nespěchejte.\n"
-"\n"
-"Na základě vaší stávající konfigurace nabídne průvodce několik řešení:\n"
-"\n"
-" * \"%s\": takto se jednoduše automaticky disk(y) rozdělí\n"
-"a již se o nic nemusíte starat.\n"
-"\n"
-" * \"%s\": průvodce detekoval jeden nebo více existujících\n"
-"Linuxových oddílů a ty nabídne pro instalaci. Budete muset definovat ke "
-"každému\n"
-"oddílu přípojný bod. Původní přípojné body jsou předvyplněny a obvykle by\n"
-"jste je měli ponechat.\n"
-"\n"
-" * \"%s\": pokud máte na disku nainstalovány Microsoft Windows a tyto\n"
-"zabírají celý disk, je možné tento prostor zmenšit a použít ho pro "
-"instalaci.\n"
-"Oddíl a data lze také vymazat  (viz volba \"Smazat celý disk\") nebo\n"
-"změnit velikost FAT či NTFS oddílu s Microsoft Windows. Změna velikosti\n"
-"oddílu je provedena beze ztráty dat a je možná, pokud jste předtím tento "
-"oddíl ve\n"
-"Windows defragmentovali. Je doporučeno zazálohovat vaše data. Tento postup\n"
-"je doporučený, pokud chcete na disku provozovat současně systém\n"
-"Mandriva Linux i Microsoft Windows.\n"
-"\n"
-"   Před výběrem této volby si prosím uvědomte, že velikost oddílu s "
-"Microsoft\n"
-"Windows bude menší než je nyní. To znamená, že budete mít méně místa pro\n"
-"uložení dat nebo instalaci programů do Microsoft Windows.\n"
-"\n"
-" * \"%s\": pokud chcete smazat veškerá data a všechny oddíly na disku\n"
-"a použít je pro instalaci systému Mandriva Linux, vyberte toto řešení.\n"
-"Zde postupujte opatrně, po výběru již není možné vzít tuto volbu zpět.\n"
-"\n"
-"   !! Pokud zvolíte tuto možnost, všechna data na disku budou ztracena.!!\n"
-"\n"
-" * \"%s\": Tato volba se objeví, pokud celý disk zabírá operační systém\n"
-"Microsoft Windows. Tato volba jednoduše smaže vše na disku a znovu disk\n"
-"rozdělí.\n"
-"\n"
-"    !! Pokud vyberete tuto volbu, veškerá data budou ztracena. !!\n"
-"\n"
-" * \"%s\": pokud chcete disk rozdělit ručně. Před touto volbou buďte "
-"opatrní,\n"
-"je sice mocná, ale nebezpečná. Velmi jednoduše zde můžete přijít o svá "
-"data.\n"
-"Nedoporučuje se těm, kteří přesně nevědí, co dělají. Chcete-li se dozvědět\n"
-"více o nástroji DiskDrake, který se v tomto případě používá, prostudujte "
-"sekci\n"
-"\"Správa vašich oddílů\" v příručce \"Začínáme\"."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Použít volné místo"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Použije existující oddíl"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Použít volné místo na Windows oddílu"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Smazat celý disk"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Odstranit Windows"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Vlastní rozdělení disku"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"Nyní je instalace ukončena a operační systém GNU/Linux je připraven k "
-"použití.\n"
-"Klepněte na \"%s\" a systém bude restartován. Nezapomeňte vyjmout "
-"instalační\n"
-"médium (CD-ROM nebo disketu). První věcí, kterou uvidíte po skončení\n"
-"hardwarových testů po zapnutí počítače, bude zavaděč s menu, kde si můžete\n"
-"vybrat, který operační systém chcete spustit.\n"
-"\n"
-"Tlačítko \"%s\" zobrazí další dvě tlačítka:\n"
-"\n"
-" * \"%s\": vytvoří disketu, se kterou\n"
-"lze celou instalaci opakovat bez zásahu operátora se stejnými volbami,\n"
-"které byly zvoleny při instalaci.\n"
-"\n"
-"    Po klepnutí na toto tlačítko se zobrazí další dvě volby:\n"
-"\n"
-"     * : \"%s\": je to částečně automatická instalace, kdy se potvrzuje\n"
-"krok při rozdělování disků (a pouze tento krok).\n"
-"\n"
-"    * : \"%s\": plně automatická instalace, data na pevném disku\n"
-"budou zrušena a disk přepsán.\n"
-"\n"
-"   Tato volba je velmi užitečná, když potřebujete nainstalovat větší počet\n"
-"stejných počítačů. Více o této možnosti je na našich WWW stránkách.\n"
-"\n"
-" * \"%s\"(*): uloží výběr balíčků, který byl zvolen při\n"
-"instalaci. Pokud budete instalovat další počítač, vložte disketu do "
-"mechaniky\n"
-"a spusťte instalaci, stiskněte [F1] a napište na příkazový řádek \n"
-">> linux defcfg=\"floppy\" << a stiskněte klávesu Enter.\n"
-"\n"
-"(*) Budete potřebovat disketu naformátovanou systémem souborů FAT.\n"
-"Chcete-li si takovou disketu vytvořit v systému GNU/Linux, napište příkaz\n"
-"\"mformat a:\" nebo \"fdformat /dev/fd0\" a poté \"mkfs.vfat /dev/fd0\"."
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Vytvoří disketu pro automatickou instalaci"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Zopakovat"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Automaticky"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Uložit výběr jednotlivých balíčků"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Každý nově vytvořený diskový oddíl musí být před použitím zformátován\n"
-"(formátováním se myslí vytvoření souborového systému).\n"
-"\n"
-"Nyní lze formátovat již existující diskové oddíly pro vymazání\n"
-"všech dat, která obsahují. Pokud to chcete provést, vyberte diskové oddíly\n"
-"pro přeformátování.\n"
-"\n"
-"Není ale nutné přeformátovat všechny již existující diskové oddíly.\n"
-"Je nutné přeformátovat oddíly, které obsahují operační systém (jako je \"/"
-"\",\n"
-"\"/usr\" nebo \"/var\") ale není nutné přeformátovat oddíly, které obsahují\n"
-"data, která chcete zachovat (typicky \"/home\").\n"
-"\n"
-"Při výběru diskových oddílů, které se budou formátovat buďte opatrní, "
-"všechna\n"
-"data na formátovaných oddílech budou ztracena a nelze je již obnovit.\n"
-"\n"
-"Pokud je vše připraveno pro formátování, klepněte na \"%s\".\n"
-"\n"
-"Pokud chcete vybrat jiné oddíly pro instalaci systému Mandriva Linux,\n"
-"klepněte na \"%s\" \n"
-"\n"
-"Klepnutím na \"%s\" můžete vybrat, které oddíly budou otestovány\n"
-"na vadné bloky."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Zpět"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"Pokaždé, když instalujete distribuci Mandriva Linux, je možné, že některé\n"
-"balíčky byly od vydání distribuce aktualizovány. Mohly to být opravy chyb\n"
-"či řešení možných bezpečnostních problémů. Pokud chcete využít právě\n"
-"této nabídky, je možné tyto balíčky nyní stáhnout z Internetu. Zvolte \"%s"
-"\"\n"
-"pokud máte funkční připojení na Internet nebo \"%s\", pokud budete\n"
-"instalovat aktualizace později.\n"
-"\n"
-"Po zvolení \"%s\" se zobrazí seznam míst, odkud mohou být aktualizace "
-"získány.\n"
-"Vyberte si nejbližší místo. Následně se objeví stromový seznam balíčků,\n"
-"který je možno ještě upravit a stisknutím tlačítka \"%s\" se provede "
-"stažení\n"
-"a instalace vybraných balíčků. Akci můžete přerušit klepnutím na \"%s\"."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Instalace"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"Nyní si vyberte úroveň zabezpečení vašeho počítače Je zřejmé, že čím více\n"
-"je počítač využíván a čím cennější data obsahuje, tím je potřeba zvolit "
-"vyšší\n"
-"úroveň, stejně tak pokud je přímo vystaven na síti Internet. Na druhou "
-"stranu,\n"
-"vyšší úroveň znesnadňuje některé obvyklé postupy.\n"
-"\n"
-"Pokud nevíte co vybrat, ponechte výchozí nastavení. Úroveň zabezpečení\n"
-"lze později změnit pomocí nástroje draksec z Ovládacího centra Mandriva.\n"
-"\n"
-"V políčku \"%s\" je jméno uživatele, který bude odpovědný za zabezpečení\n"
-"počítače. Všechny bezpečnostní zprávy systému budou odeslány na tuto adresu."
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Správce zabezpečení"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"V této chvíli je potřeba určit, který(é) oddíl(y) budou použity pro "
-"instalaci\n"
-"systému Mandriva Linux. Pokud byly oddíly již jednou definovány, buď\n"
-"z předchozí instalace GNU/Linux nebo jiným programem na rozdělení disku,\n"
-"je možné použít právě tyto oddíly. Jinak musí být oddíly nově definovány.\n"
-"\n"
-"Pro vytvoření oddílu musíte nejdříve vybrat pevný disk. Klepněte na \n"
-"\"hda\", což je první IDE disk, nebo na \"hdb\", což je druhý disk,\n"
-"případně na \"sda\", což je první SCSI disk.\n"
-"\n"
-"Pro rozdělení vybraného disku můžete použít tyto volby:\n"
-"\n"
-" * \"%s\": tato volba smaže všechny oddíly na vybraném disku.\n"
-"\n"
-" * \"%s\": dojde k automatickému vytvoření oddílu pro Ext2 a swap ve volném\n"
-"prostoru disku.\n"
-"\n"
-" * \"%s\": nabídne další možnosti:\n"
-"\n"
-"    * \"%s\": uloží tabulku oddílů na disketu. To je\n"
-"vhodné pro případ poškození tabulky, kdy ji lze z této zálohy obnovit.\n"
-"Doporučujeme využít tuto možnost.\n"
-"\n"
-"    * \"%s\": obnoví tabulku oddílů, která byla již dříve\n"
-"uložena na disketu.\n"
-"\n"
-"    * \"%s\": pokud je tabulka poškozena, můžete se\n"
-"pokusit ji opravit. Buďte ale opatrní a pamatujte na to, že se to nemusí "
-"vždy\n"
-"podařit.\n"
-"\n"
-" * \"%s\": zruší všechny změny a nahraje původní\n"
-"tabulku oddílů.\n"
-"\n"
-"    \"%s\": odznačení této volby\n"
-"způsobí, že při připojování a odpojování vyjímatelných médií jako jsou CD-"
-"ROM\n"
-"disky a floppy disky je nutné použít ručně příkaz mount.\n"
-"\n"
-" * \"%s\": pokud nemáte dobré znalosti o rozdělování disků, použijte\n"
-"tuto volbu, kdy se spustí průvodce. Doporučujeme, pokud nemáte dobré "
-"znalosti\n"
-"o vytváření oddílů na disku.\n"
-"\n"
-" * \"%s\": zruší všechny provedené změny.\n"
-"\n"
-" * \"%s\": dovoluje další akce s oddíly\n"
-"(typ oddílu, volby, formátování) a zobrazí další informace.\n"
-"\n"
-" * \"%s\": pokud máte disk rozdělen, uloží se změny na disk.\n"
-"\n"
-"Pokud definujete velikost oddílu, můžete přesněji jejich velikost určit "
-"pomocí\n"
-"kurzorových šipek na klávesnici.\n"
-"\n"
-"Poznámka: každou volbu je možné zadat také z klávesnice. Mezi oddíly se\n"
-"můžete pohybovat pomocí kláves [Tab] a [Šipka nahoru/šipka dolů].\n"
-"\n"
-"Pokud je vybrán oddíl, lze použít tyto volby:\n"
-"\n"
-" * Ctrl-c pro vytvoření nového oddílu (pokud je vybrán prázdný oddíl);\n"
-"\n"
-" * Ctrl-d pro smazání oddílu;\n"
-"\n"
-" * Ctrl-m pro zadání bodu připojení.\n"
-"\n"
-"Více informací o jednotlivých druzích souborových systémů naleznete\n"
-"v kapitole o ext2fs v \"Referenční příručce\".\n"
-"\n"
-"Pokud instalujete na počítač PPC, je potřeba vytvořit malý oddíl HFS,\n"
-"tzv. \"bootstrap\" o minimální velikosti 1MB, který bude použit pro zavaděč\n"
-"Yaboot. Pokud vytvoříte tento oddíl větší, např. 50 MB, je to dobré místo "
-"pro\n"
-"uložení ramdisku a jádra pro situace záchrany disku."
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Automatické připojování pro vyjímatelná média"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Přepne mezi normální/expertním režimem"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Instalační program nalezl na disku více než jeden oddíl s Microsoft "
-"Windows.\n"
-"Prosím vyberte si jeden z nich, který je potřeba pro novu instalaci systému\n"
-"Mandriva Linux zmenšit.\n"
-"\n"
-"Každý oddíl je zobrazen následovně: \"Pojmenování v Linuxu\",\n"
-"\"Název ve Windows\", \"Velikost\".\n"
-"\n"
-"\"Pojmenování v Linuxu\" je složeno následovně: \"typ pevného disku\",\n"
-"\"číslo disku\", \"číslo oddílu\". (například \"hda1\").\n"
-"\n"
-"Pokud máte IDE disky, pak je \"typ pevného disku\" \"hd\", pokud máte SCSI,\n"
-"označení bude \"sd\".\n"
-"\n"
-"\"Číslo disku\" je vždy písmeno za \"hd\" nebo \"sd\". Pro IDE disky je "
-"takto:\n"
-"\n"
-" * \"a\" znamená \"master disk na primárním IDE řadiči\",\n"
-"\n"
-" * \"b\" znamená \"slave disk na primárním IDE řadiči\",\n"
-"\n"
-" * \"c\" znamená \"master disk na sekundárním IDE řadiči\",\n"
-"\n"
-" * \"d\" znamená \"slave disk na sekundárním IDE řadiči\".\n"
-"\n"
-"Pro SCSI disky platí, že \"a\" je \"nejmenší SCSI ID\", \"b\" je \"druhé\n"
-"nejmenší SCSI ID\" atd.\n"
-"\n"
-"\"Název ve Windows\" je písmeno, které je použito ve Windows\n"
-"(první oddíl nebo disk má písmeno \"C:\")."
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"%s\": zkontrolujte aktuální výběr země. Pokud nejste v dané zemi, "
-"klepněte\n"
-"na tlačítko \"%s\" a vyberte si jinou. Pokud vaše země není na prvním "
-"seznamu,\n"
-"klepněte na tlačítko \"%s\" a získáte kompletní seznam zemí."
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"Tento krok se objeví pouze tehdy, pokud je na vašem počítači nalezen starší\n"
-"oddíl GNU/Linuxu.\n"
-"\n"
-"Instalační program potřebuje vědět, zda má provést instalaci nebo pouze\n"
-"aktualizaci existujícího systému Mandriva Linux.\n"
-"\n"
-" * \"%s\": Nejběžnější volba, provede kompletní výmaz starého systému.\n"
-"V závislosti na rozvržení oddílů vašeho starého systému je však možné\n"
-"zachovat obsah některých oddílů (např. adresáře \"/home\") a uchránit je "
-"před přepsáním. Pokud si přejete změnit rozmístění oddílů, změnit\n"
-"souborový systém, použijte tuto volbu.\n"
-"\n"
-" * \"%s\": tato volba provede aktualizaci balíčků instalovaných na vašem\n"
-"systému Mandriva Linux. Aktuální rozmístění diskových oddílů a uživatelská\n"
-"data zůstanou zachována. Bude ale provedena většina konfiguračních kroků,\n"
-"stejně jako při instalaci.\n"
-"\n"
-"Použití volby \"Aktualizace\" bude fungovat bez problémů na stávající "
-"verzi \n"
-"\"8.1\" a novější. Aktualizace na verzích starších než \"8.1\" není "
-"doporučována."
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Normálně zvolí instalační program správnou klávesnici na základě zvoleného\n"
-"jazyka, takže v tomto kroku není potřeba nic měnit. Zkontrolujte jeho volbu "
-"a případně\n"
-"ji změňte.\n"
-"\n"
-"Může se stát, že nemáte klávesnici, která odpovídá vašemu jazyku: například\n"
-"pokud jste anglicky hovořící Švýcar, stejně chcete mít švýcarskou "
-"klávesnici.\n"
-"Nebo pokud mluvíte anglicky, ale žijete v Quebecu, je to stejný případ. V "
-"obou\n"
-"případech se můžete vrátit na tento instalační krok a vybrat si "
-"odpovídající\n"
-"klávesnici ze seznamu.\n"
-"\n"
-"Pokud máte klávesnici pro jiný jazyk, klepněte na tlačítko \"%s\"\n"
-"a zobrazí se kompletní seznam všech podporovaných rozložení klávesnic.\n"
-"\n"
-"Pokud vyberete rozložení klávesnice založené na abecedě jiné než latince,\n"
-"budete v dalším dialogu vyzváni k výběru klávesové zkratky, která bude "
-"přepínat\n"
-"rozložení klávesnice mezi latinkou a vámi zvoleným rozložením."
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"Prvním krokem je výběr preferovaného jazyka.\n"
-"\n"
-"Výběr preferovaného jazyka ovlivňuje dokumentaci, jazyk instalačního "
-"programu\n"
-"a všech programů obecně. V prvním kroku si vyberete region kde žijete\n"
-"a potom jazyk kterým mluvíte.\n"
-"\n"
-"Tlačítko \"%s\" umožňuje zvolit další jazyky, které budou také\n"
-"nainstalovány a můžete je použít v systému. Výběrem dalších jazyků "
-"nainstalujete\n"
-"soubory s aplikacemi a dokumentací specifické pro tyto jazyky. Pokud "
-"například\n"
-"na počítači pracují občas lidé ze Španělska, vyberte angličtinu jako hlavní\n"
-"jazyka pod tlačítkem rozšířené zatrhněte volbu \"%s\".\n"
-"\n"
-"Podpora UTF-8 (unicode): Unicode je nové kódování znaků, které obsahuje\n"
-"všechny známé jazyky. Plná podpora v GNU/Linuxu je stále ve vývoji.\n"
-"Z toho důvodu bude nebo nebude v systému použita podle volby uživatele:\n"
-"\n"
-" * Pokud vyberete jazyk s jasně daným kódováním (latin1, Ruština, "
-"Japonština\n"
-"Čínština, Korejština, Thajština, Řečtina, Turečtina, většina jazyků "
-"používajících kódování\n"
-"iso-8859-2), bude implicitně použito minulostí staré kódování;\n"
-"\n"
-" * Ostatní jazyky používají implicitně Unicode.\n"
-" * Pokud potřebujete dva nebo více jazyků a tyto jazyky nepoužívají stejné\n"
-"kódování, bude pro celý systém použito kódování unicode;\n"
-"\n"
-" * Pokud uživatel vybere volbu \"%s\", bude použito kódování unicode "
-"nezávisle\n"
-"na výběru jazyků pro celý systém.\n"
-"\n"
-"Při výběru jazyka nejste omezeni pouze na jediný další. Můžete si jich "
-"vybrat\n"
-"více nebo dokonce nainstalovat všechny vybráním volby \"%s\".\n"
-"Podpora jazyka zahrnuje instalaci lokalizaci programů, fontů, kontrolu\n"
-"pravopisu, atd. \n"
-"\n"
-"Změnu různých jazyků instalovaných v systému lze provést pomocí příkazu\n"
-"\"localedrake\" spuštěného jako uživatel \"root\". Spuštění pod\n"
-"běžným uživatelem způsobí změnu nastavení pouze pro daného uživatele."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "Španělské"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"Aplikace DrakX obvykle zjistí počet tlačítek na vaší myši. Pokud ne, "
-"předpokládá,\n"
-"že máte dvoutlačítkovou myš a nastaví emulaci pro třetí tlačítko myši.\n"
-"Emulace třetího tlačítka se provádí současným stiskem levého i pravého\n"
-"tlačítka. Aplikace také umí rozpoznat, zda se jedná o myš PS/2, USB\n"
-"nebo sériovou.\n"
-"\n"
-"Pokud máte třítlačítkovou myš bez kolečka, můžete si vybrat typ myši \"%s"
-"\".\n"
-"Instalační program potom nastaví emulaci tak, že se posun kolečkem simuluje\n"
-"stisknutím prostředního tlačítka a posunováním myší nahoru a dolů.\n"
-"\n"
-"Pokud chcete zadat jiný typ myši, vyberte odpovídající typ se seznamu.\n"
-"\n"
-"Můžete rovněž vybrat položku \"%s\", kterou zvolíte \"obecný\" typ myši,\n"
-"který by měl pracovat správně s téměř každou myší.\n"
-"\n"
-"Pokud vyberete jinou myš než ta, která byla detekována, zobrazí se "
-"testovací\n"
-"obrazovka. Zde otestujte jak tlačítka tak i kolečko a ověřte, zda je "
-"nastavení\n"
-"správné. Pokud myš nepracuje správně, stiskněte mezerník nebo klávesu Enter\n"
-"a vyberte jiný typ myši.\n"
-"\n"
-"Myši s kolečkem nejsou v některých případech automaticky rozpoznány. Budete\n"
-"je muset vybrat ze seznamu. Ujistěte se, že vyberete myš s odpovídajícím "
-"typem\n"
-"portu, ke kterému je připojená. Poté, co stisknete tlačítko \"%s\", \n"
-"zobrazí se obrázek s myší. Posunujte kolečkem, aby se správně aktivovalo; "
-"kolečko\n"
-"na obrazovce by se mělo pohybovat. Poté ověřte tlačítka a zda-li se myš "
-"pohybuje\n"
-"na obrazovce správně."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "s emulací kolečka"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Univerzální | Libovolná PS/2 & USB myš"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vyberte prosím správný port. Například \"COM1\" pod MS Windows má\n"
-"v Linuxu název \"ttyS0\"."
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Následující rozhodnutí je jedním z těch, které ovlivňují celkovou "
-"bezpečnost\n"
-"systému GNU/Linux, tj. volba hesla pro uživatele \"Root\". Root je správcem\n"
-"systému, je jediný odpovědný za provádění aktualizací, přidávání uživatelů a "
-"také\n"
-"za celkové nastavení systému. Zkráceně: \"root\" může úplně všechno!\n"
-"To je také důvodem, proč se heslo volí takové, aby se nedalo lehce uhodnout\n"
-"a instalační program DrakX zkontroluje, zda není příliš jednoduché. Jak "
-"vidíte,\n"
-"je možné heslo nezadat, ale toto velmi důrazně nedoporučujeme, a to z "
-"jednoho\n"
-"důvodu. Nemyslete si, že pokud spustíte systém GNU/Linux, že je vše bezpečné "
-"a že se nemůže nic stát.. Vzhledem k tomu, že na uživatele \"root\" se "
-"nevztahují\n"
-"běžná omezení, může nenávratně poškodit celý systém, smazat data z jiných\n"
-"oddílů na disku a operačních systémů, vymazat potřebné soubory nebo celé\n"
-"oddíly, atd. Proto je důležité, aby nebylo jednoduché se tímto uživatelem "
-"stát.\n"
-"\n"
-"Zvolené heslo by se mělo skládat ze znaků a číslic a mělo by být dlouhé\n"
-"minimálně 8 znaků. Také není dobré si ho kamkoliv poznamenávat - po\n"
-"nalezení vaší poznámky může být velmi jednoduché se do vašeho systému\n"
-"dostat.\n"
-"\n"
-"Nevolte však heslo příliš dlouhé nebo komplikované, bude nutné si jej bez\n"
-"větších potíží zapamatovat.\n"
-"\n"
-"Při zadávání nebude heslo na obrazovce zobrazeno. Proto se heslo zadává\n"
-"dvakrát pro ověření, zda nedošlo k překlepu při prvním pokusu. Tak je možné\n"
-"heslo opravit a zadat dvakrát stejné. Pokud se vám přesto podaří zadat "
-"stejný\n"
-"překlep dvakrát, budete muset toto heslo s překlepem použít při prvním\n"
-"přihlášení.\n"
-"\n"
-"Jestliže chcete použít ověřovací server, klepněte na tlačítko \"%s\".\n"
-"\n"
-"Pokud se ve vaší síti používá pro ověřování uživatelů protokol LDAP, NIS\n"
-"nebo ověřovací doména Windows PDC, vyberte odpovídající protokol pro \"%s"
-"\".\n"
-"Pokud o tom nic nevíte, zeptejte se správce vaší sítě.\n"
-"\n"
-"Pokud máte problémy se zapamatováním si hesel nebo pokud není počítač\n"
-"připojen do žádné spravované sítě a věříte všem, kteří mají k počítači "
-"přístup,\n"
-"můžete vybrat volbu \"%s\"."
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "ověření"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"Zavaděč je malý program, který se spustí ihned po startu počítače a je\n"
-"zodpovědný za zavedení operačního systému. Tato část je obvykle plně\n"
-"automatická. Instalační program analyzuje zaváděcí sektor disku a zachová\n"
-"se podle toho, co zde nalezne:\n"
-"\n"
-" * pokud nalezne zaváděcí sektor Windows, přepíše ho sektorem pro LILO/GRUB\n"
-"tak, aby bylo možné spouštět jak systém Windows tak i Linux či jiný OS "
-"instalovaný\n"
-"na vašem počítači;\n"
-"\n"
-" * pokud nalezne zaváděcí sektor pro LILO nebo GRUB, tak jej přepíše novým.\n"
-"\n"
-"Pokud instalační program nedokáže rozhodnout, zeptá se na to, kam má "
-"zavaděč\n"
-"umístit. Obecně je nejbezpečnější místo \"%s\". Zvolením \"%s\" se "
-"neprovede\n"
-"instalace žádného zavaděče. Použijte to pouze tehdy, pokud víte, co děláte."
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Zde si můžete vybrat tiskový systém, který budete používat. Jiné OS "
-"nabízejí\n"
-"jeden, Mandriva Linux nabízí dva. Každý z nich je vhodnější pro různé typy\n"
-"konfigurací.\n"
-"\n"
-" * \"%s\" - což znamená 'print, do not queue' a je vhodný tehdy, pokud máte\n"
-"přímo připojenou lokální tiskárnu, chcete rychle řešit zaseklý papír a "
-"nemáte\n"
-"žádné síťové tiskárny. \"%s\" zvládá pouze několik možností a tisk na něj ze "
-"sítě\n"
-"je velmi pomalý. Pokud s GNU/Linuxem teprve začínáte, pak je \"pdq\"\n"
-"doporučený tiskový systém pro vás.\n"
-"\n"
-" * \"%s\"'Common Unix Printing System' je vynikající v tisku na lokální\n"
-"tiskárny stejně jako při tisku na tiskárnu na druhé straně planety. "
-"Nastavení\n"
-"je jednoduché a může fungovat jako klient i server pro klienty z \"lpd\"\n"
-"systému, takže je kompatibilní se staršími systémy. Je možné nastavit\n"
-"spoustu voleb, ale základní nastavení je velmi jednoduché, téměř jako u \"pdq"
-"\".\n"
-"Pokud potřebujete emulovat \"lpd\" server, stačí spustit démona \"cups-lpd"
-"\".\n"
-"\"%s\" má také grafické prostředí pro tisk a nastavení tiskárny.\n"
-"\n"
-"Pokud nyní provedete volbu a později budete chtít tiskový systém změnit,\n"
-"můžete to provést pomocí nástroje PrinterDrake z ovládacího centra Mandriva "
-"tak,\n"
-"že klepnete na tlačítko \"%s\"."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Expert"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Aplikace DrakX se nejdříve pokusí najít všechny pevné disky v počítači.\n"
-"Také se pokusí nalézt jeden nebo více PCI SCSI adaptérů. Pokud nějaký "
-"najde,\n"
-"automaticky nainstaluje správný ovladač.\n"
-"\n"
-"Protože automatická detekce hardware nemusí vždy nalézt všechny typy "
-"hardware,\n"
-"budete v dialogu dotázáni, zda vůbec máte nějaký SCSI adaptér. \n"
-"\n"
-"Pokud si budete muset vybrat ovladač ručně, aplikace DrakX se zeptá,\n"
-"zda pro něj chcete zadat nějaké volby Měli byste povolit aplikaci DrakX,\n"
-"ať se pokusí zjistit, které volby jsou pro danou kartu potřeba. Většinou to\n"
-"funguje dobře.\n"
-"\n"
-"Pokud to nebude fungovat, budete muset zadat další informace pro ovladač "
-"ručně."
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\": pokud je detekována v počítači zvuková karta, je zde\n"
-"zobrazena. Pokud ale vidíte, že zobrazená karta není přesně tak, kterou\n"
-"máte v počítači, můžete klepnutím na tlačítko vybrat jinou kartu a ovladač."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Zvuková karta"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"Zde jsou shromážděny různé informace, které se vztahují k tomuto počítači.\n"
-"V závislosti na tom, zda je či není přítomen daný hardware, můžete nebo\n"
-"nemusíte některé z těchto položek vidět. Každý záznam má krátký souhrn\n"
-"s aktuální konfigurací. Klepnutím na odpovídající tlačítko \"%s\" jej "
-"můžete\n"
-"změnit.\n"
-"\n"
-" * \"%s\": zkontrolujte nastavení rozložení kláves, pokud je to nutné, \n"
-"klepnutím na tlačítko lze změnit rozložení kláves, .\n"
-"\n"
-" * \"%s\": zkontrolujte výběr země. Pokud výběr nesouhlasí, klepnutím na\n"
-"tlačítko \"%s\" můžete vybrat jinou zemi. Pokud vaše země není na prvním\n"
-"seznamu, můžete si klepnutím na tlačítko \"%s\" zobrazit kompletní seznam.\n"
-"\n"
-" * \"%s\": instalační program se pokusí odhadnout časové pásmo na\n"
-"základě vámi vybraného jazyka. Pokud není odhadnuto správně, můžete jej\n"
-"pomocí tlačítka \"%s\" změnit.\n"
-"\n"
-" * \"%s\": zkontrolujte vaši myš. Pokud je to nutné, lze ji také změnit.\n"
-"\n"
-" * \"%s\": Klepnutím na tlačítko \"%s\" se spustí průvodce\n"
-"nastavením tiskárny. V odpovídající kapitole v \"Uživatelské příručce\" se\n"
-"dozvíte více o tom, jak tiskárnu nastavit. Rozhraní, které je v ní popsané, "
-"je\n"
-"podobné rozhraní použitému při této instalaci.\n"
-"\n"
-" * \"%s\": pokud byla při instalaci detekována zvuková karta, je\n"
-"zde zobrazena. Pokud uvedený ovladač není správný, lze provést výběr "
-"správného.\n"
-"\n"
-" * \"%s\": pokud byla detekována televizní karta, je zde zobrazena.\n"
-"Pokud karta nebyla automaticky detekována, klepnutím na tlačítko \"%s\"\n"
-"můžete provést ruční nastavení.\n"
-"\n"
-" * \"%s\": pokud byla detekována ISDN karta, je zde zobrazena.\n"
-"Klepnutím na tlačítko \"%s\" můžete měnit parametry pro tuto kartu.\n"
-"\n"
-" * \"%s\": instalační program jako výchozí rozlišení zvolí\n"
-"rozlišení \"800×600\" nebo \"1024×768\". Pokud vám to nevyhovuje, je možné\n"
-"to pomocí tlačítka \"%s\" změnit.\n"
-"\n"
-" * \"%s\": pokud chcete nyní nastavit připojení k Internetu nebo k lokální\n"
-"síti, klepnutím na tlačítko se spustí průvodce. Plnou dokumentaci naleznete\n"
-"v tištěné příručce, případně můžete po instalaci využít ovládací centrum\n"
-"Mandriva Linux, kde rovněž naleznete kompletní nápovědu.\n"
-"\n"
-" * \"%s\": umožňuje nastavit adresu HTTP a FTP proxy, což je užitečné,\n"
-"pokud se počítač nachází za firewallem.\n"
-"\n"
-" * \"%s\": tato položka dovoluje předefinovat úroveň zabezpečení, která "
-"byla\n"
-"nastavena v předchozím kroku\n"
-"\n"
-" * \"%s\": pokud budete počítač připojovat do Internetu, je doporučeno "
-"spustit\n"
-"ochranu před napadením aktivací firewallu. Více o nastavení firewallu se\n"
-"dočtete v odpovídající kapitole příručky \"Začínáme\".\n"
-"\n"
-" * \"%s\": pokud chcete změnit nastavení zavaděče, můžete to provést\n"
-"klepnutím na toto tlačítko. Změny by měly provádět pouze zkušení uživatelé.\n"
-"Více informací lze nalézt v tištěné dokumentaci nebo online nápověde\n"
-"v ovládacím centru Mandriva Linux.\n"
-"\n"
-" * \"%s\": zde si můžete konkrétně určit, které služby budou na vašem "
-"počítači\n"
-"spuštěny. Pokud bude tento počítač používán jako server, je vhodné provést\n"
-"kontrolu toho, co je nastaveno."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Časová zóna"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "TV karta"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "ISDN karta"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Grafické rozhraní"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Síť"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Proxy"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Úroveň zabezpečení"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Firewall"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Zaváděcí program"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Služby"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vyberte disk, který chcete smazat pro instalaci oddílu Mandriva Linux.\n"
-"Pamatujte na to, že všechna data budou ztracena a nelze je již obnovit!"
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Klepněte na \"%s\", pokud chcete smazat všechna data a oddíly na tomto\n"
-"pevném disku. Buďte opatrní, po odklepnutí tlačítka \"%s\" nelze obnovit "
-"žádná dřívější data ani oddíly a to i pro Windows.\n"
-"\n"
-"Klepnutím na \"%s\" zrušíte tuto operaci bez ztráty dat a oddílů na disku."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Další ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Předchozí"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Nelze načíst moduly jádra odpovídající instalovanému jádru (chybí soubor\n"
-"%s), což obecně znamená, že spouštěcí disketa nemá jádro stejné jako má "
-"instalační médium (vytvořte prosím novou spouštěcí disketu)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Musíte také naformátovat %s"
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Máte ještě nějaká další doplmující édia?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-"Byla nalezena následující média, která budou použita během instalace: %s.\n"
-"\n"
-"\n"
-"Máte nějaká dodatečná instalační média, která chcete nastavit?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "Síť (HTTP)"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "Síť (FTP)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "Vložte znovu CD 1"
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Žádné zařízení nenalezeno"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "Vložte CD"
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Nelze připojit CD-ROM"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "URL zrcadla?"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Nelze nalézt soubor hdlist na tomto zrcadle"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Vyměňte prosím CD!\n"
-"Prosím vložte CD označené \"%s\" do mechaniky a stiskněte Ok."
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr "Probíhá kopírování"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Vybrali jste pro instalaci následující server(y): %s\n"
-"\n"
-"\n"
-"Tyto servery budou standardně aktivovány. Přestože není známý žádný\n"
-"bezpečnostní problém, mohou se přesto vyskytnout. Je proto důležité "
-"aktualizovat\n"
-"vždy, když je to potřeba.\n"
-"\n"
-"\n"
-"Chcete opravdu nainstalovat tyto servery?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Následující balíčky budou odebrány pro umožnění aktualizace systému: %s\n"
-"\n"
-"\n"
-"Opravdu chcete odebrat tyto balíčky?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Chyba při čtení souboru %s"
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Následující disk(y) byly přejmenovány:"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr "%s (předchozí název %s)"
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Stala se chyba - nebylo nalezeno žádné zařízení na kterém by se daly "
-"vytvořit nové souborové systémy. Zkontrolujte prosím hardware"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr "Prosím vyberte zdroj"
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr "Chybný zdroj %s"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Soubor již existuje. Přepsat?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Nelze provést sejmutí obrazovky před rozdělením disků"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Sejmuté obrazovky budou dostupné po instalaci v adresáři %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Instalace systému"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Konfigurace systému"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Některé části vašeho hardware potřebují pro svoji práci 'speciální' "
-"ovladače.\n"
-"Další informace můžete nalézt na: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Musíte mít kořenový oddíl.\n"
-"K jeho vytvoření musíte zvolit jeden existující oddíl\n"
-"(nebo vytvořit nový), zvolit 'Přípojný bod'\n"
-"a nastavit ho na '/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nemáte odkládací oddíl\n"
-"\n"
-"Chcete přesto pokračovat?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Musíte mít FAT oddíl připojený na /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Není dostatek místa pro vytvoření nového diskového oddílu"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Použít existující oddíl"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Není zde žádný existující oddíl k použití"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Použít Windows oddíl jako loopback"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Který diskový oddíl chcete použít pro Linux4Win?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Zvolte velikosti"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Velikost kořenového oddílu v MB:"
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Velikost odkládacího oddílu v MB: "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Nejsou zde žádné FAT oddíly, které by bylo použít pro loopback (nebo není "
-"dostatek místa)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Na kterém oddílu chcete měnit velikost?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"Změnu velikost FAT není možné provést, \n"
-"vyskytla se následující chyba: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Počítám volné místo na Windows oddílu"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Váš diskový oddíl s Windows je příliš fragmentován. Restartujte počítač do "
-"systému Windows, použijte program 'defrag' a potom spusťte opět instalaci."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"VAROVÁNÍ!\n"
-"\n"
-"DrakX nyní musí zmenšit oddíl s Windows. Buďte opatrní: tato operace je\n"
-"nebezpečná. Pokud jste tak již neučinili, měli byste nejprve ukončit "
-"instalaci,\n"
-"spustit \"chkdsk c:\" z příkazové řádky (spuštění programu \"scandisk\" "
-"nestačí, použijte příkaz \"chkdsk\"!), popřípadě i defrag a potom instalaci "
-"spustit znovu.\n"
-"Také byste si měli data zálohovat. Až si budete jistí, že chcete "
-"pokračovat,\n"
-"stiskněte Ok."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Jakou velikost oddílu chcete nechat pro Windows na"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "diskovém oddílu %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Počítám hranice souborového systému s Windows"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Změna FAT oddílu neuspěla: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Nejsou zde žádné FAT oddíly, které by bylo možné změnit (nebo není dostatek "
-"místa)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Odstranit Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Máte více než jeden pevný disk, na který chcete instalovat Linux?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "VŠECHNY diskové oddíly a data na disku %s budou zrušena"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Použít fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Nyní můžete rozdělit váš pevný disk %s.\n"
-"Až skončíte, nezapomeňte uložit změny pomocí 'w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Nemůžu najít žádné volné místo pro instalaci"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Průvodce DrakX našel následující řešení rozdělení disku:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Vytváření diskových oddílů selhalo: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Startuji síť"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Zastavuji síť"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Úvod\n"
-"\n"
-"Operační systém a různé části dostupné v distribuci Mandriva Linux jsou "
-"nazývány \"Softwarové produkty\" (\"Software Products\"). Softwarové "
-"produkty zahrnují, ale nejsou omezeny, na programy, metody, pravidla a "
-"dokumentaci, vztahující se k operačnímu systému a dalším komponentám "
-"distribuce Mandriva Linux.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"Varování: Svobodný Software nemusí být vždy nezávislé na patentech\n"
-"a některý Svobodný Software může být ve vaší zemi chráněn patentem.\n"
-"Například zahrnuté dekodéry pro MP3 mohou vyžadovat licenci pro další\n"
-"použití (více detailů najdete na http://www.mp3licensing.com). Pokud si\n"
-"nejste jisti, zda se na váz nevztahuje některý patent, zkontrolujte to\n"
-"s místními právníky."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Varování\n"
-"\n"
-"Přečtěte si prosím pozorně následující termíny. Pokud s nimi nesouhlasíte,\n"
-"nejste oprávněn pokračovat v instalaci následujícím CD. Stiskněte\n"
-"\"Odmítnout\" pro pokračování v instalaci bez tohoto média.\n"
-"\n"
-"\n"
-"Některé programy na dalším CD médiu nejsou šířeny podle licence GPL či\n"
-"podobné. Každý z těchto programů je šířen podle vlastní licence a podmínek.\n"
-"Čtete pozorně tyto licence a podmínky před tím, než začnete daný software\n"
-"používat nebo šířit.\n"
-"Některé licence zakazují přenášení, vytváření duplikátů (mimo záložní "
-"kopii),\n"
-"další šíření, dekompilaci, reverzní engineering nebo modifikaci komponent.\n"
-"Každé porušení podmínek okamžitě přerušuje vaše práva podle dané licence.\n"
-"I když dané licence dávají nějaká práva, není dovoleno instalovat daný\n"
-"program na více systémů, přizpůsobovat ho provozu na síti. V případě\n"
-"pochybností kontaktujte distributora nebo výrobce daného programu.\n"
-"Přenechání práv třetím osobám nebo kopírování části komponent či\n"
-"dokumentace je také zakázáno.\n"
-"\n"
-"\n"
-"Všechna práva na programy na dalším CD médiu patří jejím právoplatným\n"
-"vlastníkům podle autorského zákona.\n"
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Gratulujeme vám, instalace je dokončena.\n"
-"Vyjměte zaváděcí média a stiskněte Return pro restart.\n"
-"\n"
-"\n"
-"Informace o opravách pro tuto verzi systému Mandriva Linux lze\n"
-"nalézt na stránce Errata dostupné na:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Informace o nastavení systému po instalaci jsou dostupné\n"
-"v příslušné kapitole oficiální uživatelské příručky pro Mandriva Linux."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Zdvojený přípojný bod %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Některé důležité balíčky nebyly správně nainstalované.\n"
-"Je možné, že je poškozen CD disk nebo CD-ROM mechanika.\n"
-"Zkontrolujete to použitím příkazu \"rpm -qpl media/main/*.rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Začínám '%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Výběr skupiny balíčků"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Celková velikost: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Špatný balíček"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Verze: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Velikost: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Důležitost: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Nemůžete vybrat/nevybrat tento balíček"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "protože chybí %s"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "díky nesplněné závislosti %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "pokus o postoupení %s"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "aby bylo zachováno %s"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"Nemůžete vybrat tento balíček, protože pro jeho instalaci není dost místa"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Budou instalovány tyto balíčky"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Budou odebrány tyto balíčky"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Toto je nepostradatelný balíček, nemůže být odstraněn"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Nemůžete od-označit tento balíček, protože je už nainstalovaný"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Tento balíček musí být aktualizován\n"
-"Jste si jisti, že ho nechcete zvolit?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Tento balíček musí být aktualizován, nemůžete ho nezvolit"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Ukázat automaticky vybrané balíčky"
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "Načíst/Uložit výběr"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Aktualizuji výběr balíčků"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Minimální instalace"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Vyberte si balíčky, které chcete nainstalovat"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Instaluji"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Odhaduji"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Bez detailů"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Zbývající čas "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Čekejte prosím, připravuji instalaci"
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d balíčků(y)"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Instaluji balíček %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Odmítnout"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Vyměňte prosím CD!\n"
-"Prosím vložte CD označené \"%s\" do mechaniky a stiskněte Ok.\n"
-"Pokud toto CD nemáte, stiskněte Zrušit a toto CD nebude nainstalováno."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Stala se chyba při řazení balíčků:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Přesto pokračovat?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Stala se chyba při instalaci balíčků:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "nenastaveno"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-"Byla nalezena následující instalační média.\n"
-"Pokud chcete některé z nich vynechat, můžete je nyní odznačit."
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-"Máte možnost před instalací zkopírovat obsah CD na pevný disk.\n"
-"Instalace pak bude pokračovat z pevného disku a balíčky zůstanou dostupné i "
-"poté, co je systém plně nainstalován."
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr "Kopírovat celá CD"
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Souhlas s licencí"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr "Poznámky k vydání"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Vyberte si rozložení vaší klávesnice."
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Zde je úplný seznam dostupných klávesnic"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Instalace/Aktualizace"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Jedná se o instalaci nebo aktualizaci?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Aktualizace %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Šifrovací klíč pro %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Vyberte si typ vaší myši."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Připojení myši"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Ke kterému sériovému portu je připojena vaše myš?"
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Emulace tlačítek"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulace 2 tlačítka"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulace 3 tlačítka"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Nastavuji PCMCIA karty..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Nastavuji IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "Nejsou dostupné žádné diskové oddíly"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Hledám oddíly, které lze připojit"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Zvolte si přípojné(mount) body"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Pro bootstrap není potřebné místo o velikosti 1MB! Instalace může pokračovat "
-"ale pro spuštění systému musíte vytvořit bootstrap oddíl pomocí DiskDrake"
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Je nutné vytvořit zavedení PPC PReP Boot! Instalace může pokračovat, ale pro "
-"zavedení systému musíte vytvořit zaváděcí oddíl pomocí DiskDrake"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Zvolte diskové oddíly které chcete naformátovat"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Otestovat na vadné stopy?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Selhala kontrola souborového systému %s. Chcete opravit chyby? (pozor, může "
-"dojít ke ztrátě dat)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Není dostatek odkládacího prostoru k instalaci, prosím přidejte nějaký"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Hledám dostupné balíčky a znovu sestavuji databázi balíčků..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Hledám dostupné balíčky..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Prohledávám již instalované balíčky..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Vyhledávám balíčky pro aktualizaci..."
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Zvolte si zrcadlo (mirror) pro stahování balíčků"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Na vašem systému není dostatek místa pro instalaci nebo aktualizaci (%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Vyberte si, zda chcete uložit nebo načíst výběr balíčků.\n"
-"Formát je stejný jako u souborů generovaných pomocí auto_install."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Zátěž"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Uložit"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "Chybný soubor"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Velikost vybraných balíčků je větší než místo na disku"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Typ instalace"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nevybrali jste žádnou skupinu balíčků\n"
-"Vyberte si prosím alespoň minimální instalaci"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Základní dokumentace (doporučeno!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Opravdu minimální instalace (speciálně bez urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Všechno"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Pokud máte všechna CD vypsaná níže, klepněte na Ok.\n"
-"Pokud nemáte žádné z nich, klepněte na Zrušit.\n"
-"Pokud vám chybí pouze některé z nich, odznačte je a zvolte Ok."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM označené \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Připravuji instalaci"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instaluji balíček %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Probíhá nastavování po instalaci"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"Nyní máte možnost stáhnout aktualizované balíčky. Tyto balíčky byly\n"
-"uvolněny až po vydání distribuce. Mohou obsahovat bezpečnostní\n"
-"aktualizace nebo opravy chyb.\n"
-"\n"
-"Chcete-li získat tyto balíčky, musíte mít k dispozici funkční připojení\n"
-"k Internetu.\n"
-"\n"
-"Chcete nainstalovat aktualizace?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Stahuji ze zrcadla(mirror) seznam dostupných balíčků"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Nelze kontaktovat zrcadlo %s"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Chcete to zkusit znovu?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Jaké je vaše časové pásmo?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatická synchronizace času (pomocí NTP)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP Server"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Souhrn"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Systém"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Hardware"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Vzdálený CUPS server"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Bez tiskárny"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Máte nějakou zvukovou kartu na ISA sběrnici?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Pro nastavení zvukové karty spusťte po instalaci \"alsaconf\" nebo "
-"\"sndconfig\""
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Nebyla nalezena zvuková karta. Zkuste spustit po instalaci \"harddrake\"."
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Grafické rozhraní"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Síť & Internet"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "nastaveno"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Bezpečnost"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "aktivováno"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "vypnuto"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Spuštění"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s na %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Služby: aktivováno %d z %d registrovaných"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
-"Nemáte nastaveno prostředí X. Chcete jej skutečně ponechat nenastavené?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Připravuji zaváděcí program"
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Zdá se, že máte počítač OldWorld nebo jiný, neznámý, na kterém nebude "
-"zavaděč Yaboot pracovat. Instalace bude pokračovat, ale budete potřebovat "
-"BootX nebo jiný nástroj pro zavedení systému. Parametr jádra pro kořenový "
-"souborový systém je: root=%s"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Chcete použít aboot?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Stala se chyba při instalaci aboot,\n"
-"mám se pokusit o instalaci i když to zruší první oddíl na disku?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"V této úrovní zabezpečení je přístup k souborům na oddíle s Windows omezena "
-"pouze na uživatele administrátor."
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Vložte prázdnou disketu do %s"
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Vložte prosím jinou disketu s ovladači"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Vytvářím disketu pro automatickou instalaci..."
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Některé kroky nebyly dokončeny.\n"
-"\n"
-"Chcete opravdu nyní skončit?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Vytvořit disketu pro automatickou instalaci"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Instalace může být v případě potřeby plně automatická,\n"
-"ale použije se celý disk!!!\n"
-"(v případě instalace na druhý počítač)\n"
-"\n"
-"Takto lze jednoduše zopakovat instalaci.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> přepn. mezi prvky | <Space> výběr   | <F12> další obraz."
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Vyberte soubor"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Přidat"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Změnit"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Odebrat"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Základní"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Ukončit"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Provést"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Špatná volba, zkuste to znovu\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Vaše volba? (výchozí %s) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Položky, které je potřeba vyplnit:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Vaše volba? (0/1, výchozí '%s') "
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Tlačítko '%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Chcete klepnout na toto tlačítko? "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Vaše volba? (výchozí '%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr " zadejte 'void' pokud chcete prázdný vstup"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Je zde více voleb, ze kterých je možné si vybrat (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vyberte si prosím první číslo z výběru, které chcete editovat,\n"
-"nebo stiskněte Enter pro pokračování.\n"
-"Vaše volba? "
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Oznamuji změnu návěští:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Znovu odeslat"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "České (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Německé"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvořák"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Španělské"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Finské"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Francouzské"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norské"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Polské"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Ruské"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Švédské"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "UK-Britské"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "US-Americké"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albánské"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Arménské (staré)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Arménské (psací stroj)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Arménské (foneticky)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Arabské"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Ázerbajdžánské (latinka)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belgické"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bengálské (Inscript styl)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bengálské (Probhat styl)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bulharské (foneticky)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bulharské (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brazilské (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosenské"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Běloruské"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Švýcarské (Německý styl)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Švýcarské (Francouzský styl)"
-
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Cherokee slabičné"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "České (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Německé (bez mrtvých kláves)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanagari"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Dánské"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvořák (US) "
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvořák (Esperanto)"
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvořák (Francouzské)"
-
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvořák (VB)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvořák (Norské)"
-
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvořák (Polské)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvořák (Švédské) "
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Dzongkha/Tibetské"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estonské"
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Farské"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Gruzínské (\"Ruské\" rozložení)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Gruzínské (rozložení \"Latin\")"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Řecké"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Řecké (polytonické)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Gujartské"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Gurmutské"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Chorvatské"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Maďarské"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Irské"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Izraelské"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Izraelské (foneticky)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Íránské"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Islandské"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Italské"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Inuktitutské"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Japonská 106 kláves"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kanadské"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Korejská klávesnice"
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Kurdské (arabský skript)"
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Kyrgizská klávesnice"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Latinsko-Americké"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laoské"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Litevské AZERTY (stará)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Litevské AZERTY (nová)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Litevské \"číselná řada\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Litevské \"foneticky\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Litevské"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malayalam"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Makedonské"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Myamarské (Burnské)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongolské (cyrilice)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Maltézské (UK)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Maltézské (US)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Holandské"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Oriya"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Polské (rozložení QWERTY)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Polské (rozložení QWERTZ)"
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Paštské"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portugalské"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Kanadské (Quebec)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Rumunské (QWERTZ)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Rumunské (QWERTY)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Ruské (foneticky)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Saami (Norské)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Saami (švédské/finské)"
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Sindhské"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Slovinské"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slovenské (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slovenské (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Srbské (cyrilika)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Syrské"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Syrské (foneticky)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telugu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamilské (ISCII)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamilské (psací stroj)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Thajské (Kedmanee)"
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Thajské (TIS-820)"
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Thajské (Pattachote)"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Tádžické"
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Turkmenské"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Turecké (tradiční model \"F\")"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Turecké (moderní model \"Q\")"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ukrajinské"
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Urdské"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US (mezinárodní)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Uzbecké (cyrilice)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamská \"číselná řada\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Jugoslávské (latin)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Pravá klávesa Alt"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Obě klávesy Shift současně"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control a Shift současně"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "Klávesa CapsLock"
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Klávesy Shift a CapsLock současně"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Klávesy Ctrl a Alt současně"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt a Shift současně"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Klávesa \"Menu\""
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Levá klávesa \"Windows\""
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Pravá klávesa \"Windows\""
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Obě klávesy Control současně"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Obě klávesy Alt současně"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Levá klávesa Shift"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Pravá klávesa Shift"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Levá klávesa Alt"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Levá klávesa Control"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Pravá klávesa Control"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Zde můžete vybrat klávesu nebo kombinaci kláves, kterou\n"
-"budete moci přepínat rozložení znaků vaší klávesnice.\n"
-"(např. mezi českým a americkým)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"Nastavení bude aktivováno až po instalaci.\n"
-"Během instalace je nutné pro přepnutí mezi různými klávesovými mapami použít "
-"pravý Ctrl."
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andorra"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Spojené Arabské Emiráty"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afghánistán"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua a Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albánie"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Arménie"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nizozemské Antily"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antarktida"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Argentina"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Americká Samoa"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Ázerbajdžán"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosna a Hercegovina"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbados"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladéš"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bulharsko"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Bahrajn"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benin"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermudy"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolívie"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahamy"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Bhútán"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet Island"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Botswana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Bělorusko"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Belize"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosové ostrovy (Keeling Islands)"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Centrální africká republika"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Cookovy ostrovy"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Chile"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Čína"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbie"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Srbsko & Montenegro"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Kuba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Cape Verde"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Vánoční ostrov"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Kypr"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Džibuti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikánská republika"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Alžírsko"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ekvádor"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Egypt"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Západní Sahara"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Etiopie"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fidži"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandy (Malvinas)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Mikronésie"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Faroe Islands"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gabon"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Velká Británie"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenada"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Georgie"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Francouzská Guinea"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Ghana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Grónsko"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gambie"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Guinea"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Rovníková Guinea"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Jižní Georgie a ostrovy South Sandwich"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Guam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Guyana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Čína (Hong Kong)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard a McDonaldovy ostrovy"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Chorvatsko"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haiti"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonésie"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Indie"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britské teritorium Indického moře"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Irák"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Írán"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Island"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamajka"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Jordán"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Keňa"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kyrgyzstán"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Kambodža"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Comoros"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts a Nevis"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Korea (Severní)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Korea"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kuvajt"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmanské ostrovy"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazachstán"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Svatá Lucie"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Lichtenštejnsko"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Srí Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Libérie"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Litva"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Lucembursko"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Lotyšsko"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Libye"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Maroko"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monako"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldava"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Islands"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Makedonie"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongolsko"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Northern Mariana Islands"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martinique"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Mauretánie"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malta"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Maledivy"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malawi"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malajsie"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mosambik"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibie"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Nová Kaledonie"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Niger"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolské ostrovy"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nigérie"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragua"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepál"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauru"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Omán"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panama"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Peru"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Francouzská Polynésie"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Nová Guinea"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Filipíny"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pákistán"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre a Miquelon"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palau"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Katar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Reunion"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Rumunsko"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudská Arábie"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon Islands"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Seychely"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sudán"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapur"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Svatá Helena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Slovinsko"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard a ostrovy Jan Mayen"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senegal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somálsko"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Surinam"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome a Principe"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Sýrie"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Svazijsko"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks a Caicos Islands"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Čad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "Francouzská jižní teritoria"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tadžikistán"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Východní Timor"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistán"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunisko"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tonga"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Turecko"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad a Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzanie"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ukrajina"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Uganda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Spojené státy (Minor Outlying Islands)"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistán"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vatikán"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent a Grenadiny"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Panenské ostrovy (britské)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Panenské ostrovy (U.S.)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis a Futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoa"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Jemen"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zambie"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "Měli byste nainstalovat následující balíčky: %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Vítá vás %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Propletené přípojné body %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Odeberte nejdříve logické disky\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Parametry"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "ŽÁDNÉ"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Nastavení modulu"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Zde můžete nastavit každý z parametrů modulu."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Našel jsem %s rozhraní"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Máte ještě nějaké jiné?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Máte nějaké %s rozhraní?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Ukázat informace o hardware"
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr "Instaluji ovladač pro řadič USB"
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Instaluji ovladač pro řadič Firewire %s"
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Instaluji ovladač pro řadič pevného disku %s"
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Instaluji ovladač pro síťovou kartu (Ethernet) %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instaluji ovladač pro %s kartu %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Nyní lze zadat volby pro modul %s.\n"
-"Pozn.: každá adresa by měla být ve tvaru 0x např. '0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nyní můžete poskytnout modulu %s další parametry.\n"
-"Volby se zadávají ve tvaru ''název=hodnota název2=hodnota2 ...''.\n"
-"Například, ''io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Volby modulu:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Který %s ovladač mám zkusit?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"V některých případech potřebuje ovladač %s pro svoji správnou funkci další\n"
-"informace, přestože normálně funguje i bez nich. Chtěli byste zadat\n"
-"nějaké doplňující možnosti, nebo raději necháte ovladač samostatně "
-"prozkoumat\n"
-"hardware vašeho počítače, aby získal informace které potřebuje? Zkoumání\n"
-"hardware může ve výjimečných případech způsobit zamrznutí počítače, ale "
-"nemělo\n"
-"by v žádném případě způsobit jiné škody."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Automatické prozkoumání"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Zadejte možnosti"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Spuštění modulu %s selhalo.\n"
-"Chcete to zkusit s jinými parametry?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "číslo"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d čísel oddělených čárkou"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d znakových řetězců oddělených čárkou"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "čárkou oddělená čísla"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "čárkou oddělené znakové řetězce"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - myš"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Standardní"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standardní PS2 myš s kolečkem"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Automaticky"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 tlačítko"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Standardní dvoutlačítková myš"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Standardní třítlačítková myš s emulací kolečka"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "S kolečkem"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "Sériová"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Standardní třítlačítková myš"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan s emulací kolečka"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech série CC (sériová)"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech série CC (sériová) s emulací kolečka"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (sériová, starý C7 typ)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Mouse (sériová, starý C7 typ) s emulací tlačítka"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse s emulací kolečka"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "Busmouse"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 tlačítka"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 tlačítka"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3 tlačítková s emulací kolečka"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Univerzální"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Libovolná PS/2 & USB myš"
-
-#: mouse.pm:89
-#, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Xbox Controller S"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "Žádná"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Bez myši"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Synaptics Touchpad"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Otestujte, prosím, funkčnost myši"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Pohybujte kurzorem"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "A TOČTE KOLEČKEM!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "použít PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "použít PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "použít DHCP"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel Speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - nalezeno"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (pomocí PPPoA) USB"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (pomocí DHCP) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Připojení k Internetu"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"Nejběžněji se pro připojení pomocí ADSL používá pppoe.\n"
-"Některá připojení používají PPTP, některá pouze DHCP. Jestli si nejste "
-"jistí, zvolte 'použít PPPoE'"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "Typ připojení ADSL:"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Webový server"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Doménový server"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "Server SSH"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "Server FTP"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Poštovní server"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP a IMAP server"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Server Telnet"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr "Sdílení souborů s Windows (SMB)"
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "Server CUPS"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Požadavek na odezvu (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "BitTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"Nastavení aplikace drakfirewall\n"
-"\n"
-"Zde je možné nastavit osobní firewall pro tento systém Mandriva Linux.\n"
-"Pro výkonné řešení vyhrazeného firewallu použijte specializovanou\n"
-"distribuci Mandriva Security Firewall."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Nastavení aplikace drakfirewall\n"
-"\n"
-"Předtím, než budete pokračovat, se ujistěte, že jste nastavili vaši\n"
-"síť a přístup k Internetu pomocí aplikace drakconnect."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Které služby přístupné z Internetu chcete povolit?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Zadali jste nesprávný port.\n"
-"Správně je například: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Více se dozvíte ze souboru /etc/services."
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Zadán špatný port: %s.\n"
-"Správný formát je \"port/tcp\" nebo \"port/udp\", \n"
-"kde číslo portu je mezi 1 a 65535.\n"
-"\n"
-"Lze také zadat rozmezí portů (např. 24300:24350/udp)"
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Všechno (bez firewallu)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Další porty"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "Neuvedeno - upravit ručně"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Nevím"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Ručně"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr "Vyberte prosím ovladač z Windows (soubor .inf)"
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "Ruční volba"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Interní ISDN karta"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Ruční nastavení"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Automatická IP (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "Automatická IP (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol použitý ve zbytku světa"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Evropský protokol (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol použitý ve zbytku světa \n"
-" žádný D-kanál (leased lines)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Modem Alcatel Speedtouch USB"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Modem Sagem USB"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Modem Bewan PCI"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "Modem ECI Hi-Focus"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Dynamic Host Configuration Protocol (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Ruční nastavení TCP/IP"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "Point to Point Tunneling Protocol (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP přes Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP přes ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr "DSL přes CAPI"
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Bridged Ethernet LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Bridged Ethernet VC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "Routed IP LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "Routed IP VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Podle scénáře"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Pomocí terminálu"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Nastavení sítě & Internetu"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(nalezeno na portu %s)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(nalezeno %s)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(nalezeno)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "Připojení k LAN"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Bezdrátové připojení"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL připojení"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Kabelové připojení"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN připojení"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Modemové připojení"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Zvolte si připojení, které chcete nastavit"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Nyní se bude nastavovat připojení %s.\n"
-"\n"
-"\n"
-"Stiskněte \"%s\" pro pokračování."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Nastavení připojení"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Prosím vyplňte nebo zkontrolujte následující údaje"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ karty"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "DMA karty"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "IO karty"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 karty"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 karty"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Vaše osobní telefonní číslo"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Jméno poskytovatele (např. provider.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Telefonní číslo poskytovatele"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "DNS poskytovatele č. 1 (volitelné)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "DNS poskytovatele č. 2 (volitelné)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Typ vytáčení"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Rychlost připojení"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Prodleva připojení (vteřiny)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Váš účet (uživatelské jméno)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Heslo vašeho účtu"
-
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr "Kabelové připojení: nastavení účtu"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr "Použít přihlášení BPALogin (nutné pro poskytovatele Telstra)"
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Zvolte síťové rozhraní pro nastavení:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Síťové zařízení"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Externí ISDN modem"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Zvolte zařízení!"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Nastavení ISDN"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Jaký typ karty máte?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Jestli máte ISA kartu, měly by být hodnoty na následující obrazovce "
-"správné.\n"
-"\n"
-"Jestli máte PCMCIA kartu, musíte znát její IRQ a IO.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Pokračovat"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Přerušit"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Kterou z těchto ISDN karet máte?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-"Pro tento modem je k dispozici ovladač CAPI. Tento ovladač poskytuje více "
-"možností než volně dostupný ovladač (např. posílání faxů). Který z ovladačů "
-"chcete použít?"
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Ovladač"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Který protokol chcete použít?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Vyberte si svého poskytovatele internetu.\n"
-" Pokud není na seznamu, vyberte si Jiný"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Poskytovatel:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Váš modem není systémem podporován.\n"
-"Podívejte se na stránky http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Zvolte modem pro nastavení:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Ke kterému sériovému portu je váš modem připojen?"
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Vyberte svého poskytovatele:"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Vytáčení: nastavení účtu"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Název připojení"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Telefonní číslo"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Přihlašovací jméno"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "Vytáčení: Parametry IP"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "Parametry IP"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP adresa"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Maska podsítě"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Vytáčení: Parametry DNS"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Název domény"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "První DNS Server (nepovinný)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Druhý DNS Server (nepovinný)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "Nastavit název počítače podle IP adresy"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Brána(gateway)"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "IP adresa brány"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "Nastavení ADSL"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Vyberte prosím vašeho poskytovatele ADSL"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"Pro Alcatel potřebujete speciální microcode.\n"
-"Můžete ho nyní nahrát z diskety, z Windows oddílu\n"
-"nebo tento krok přeskočit a nahrát jej později."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Použít disketu"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Použít oddíl s Windows"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Nechat na později"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "Nepodařilo se zkopírovat firmware, soubor %s nebyl nalezen"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "Kopírování firmware proběhlo úspěšně"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Potřebujete mikrokód pro Alcatel.\n"
-"Stáhněte jej z\n"
-"%s\n"
-"a zkopírujte soubor mgmt.o do /usr/share/speedtouch"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "ID virtuální cesty (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "ID virtuálního okruhu (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "Zapouzdření:"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"Modem ECI Hi-Focus nelze podporovat díky problémům se šířením binárních "
-"ovladačů.\n"
-"\n"
-"Ovladač pro tento modem lze nalézt na adrese http://eciadsl.flashtux.org/"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "Zavést ovladač ručně"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr "Použít ovladač z Windows (pomocí můstku ndiswrapper)"
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "Nelze nainstalovat balíček %s!"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Hledání názvu počítače pro Zeroconf"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Nastavuji síťové zařízení %s (ovladač %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Prosím zadejte nastavení IP protokolu pro tento počítač.\n"
-"Každá položka musí být zadána jako IP adresa v 'desetinné' formě\n"
-"(například 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Přiřadit název počítače ze získané DHCP adresy"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "Název počítače z DHCP"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Maska sítě"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Sledovat ID síťové karty (užitečné u notebooků)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Rychlé připojení do sítě"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Spustit při startu"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "Metrika"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP klient"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Prodleva DHCP (sekundy)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "Získat adresy DNS serverů z DHCP"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr "Získat adresy YP serverů z DHCP"
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr "Získat adresy NTPD serverů z DHCP"
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresa musí být ve formátu 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Síťová maska by měla být ve formátu 255.255.224.0"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "Varování: IP adresa %s je obyčejně rezervována!"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s je již používán\n"
-
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Vyberte ovladač ndiswrapper"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr "Instalovat nový ovladač"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "Zadejte prosím parametry bezdrátového připojení této karty:"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "Operační režim"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Ad-hoc"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Spravované"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Primární"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Repeater"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Sekundární"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Auto"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Název sítě (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "ID sítě"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "Operační frekvence"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "Práh citlivosti"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Bitová rychlost (b/s)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-"RTS/CTS přidává dodatečnou komunikaci před přenosem každého paketu, která\n"
-"zajišťuje, že je kanál volný. To je sice dodatečná zátěž, ale v případě "
-"skrytých uzlů\n"
-"nebo velkého počtu aktivních uzlů může zvýšit výkon. Tento parametr "
-"nastavuje velikost\n"
-"nejmenšího paketu, pro kterou uzel posílá RTS, hodnota rovná maximální "
-"velikosti\n"
-"paketu tuto funkci vypne. Lze také nastavit tento parametr na automatický, "
-"pevný nebo\n"
-"jej vypnout."
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "Fragmentace"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "dodatečné parametry příkazu Iwconfig"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-"Zde můžete nastavit dodatečné parametry pro bezdrátové připojení jako:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick je již nastaveno "
-"jako hostname).\n"
-"\n"
-"Více informací viz manuálová stránka iwconfig(8)."
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "dodatečné parametry příkazu lwspy"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-"Příkaz lwspy se používá pro nastavení seznamu adres v rozhraní\n"
-"bezdrátové sítě a načítání informací o stavu sítě z každé z nich.\n"
-"\n"
-"Tato informace je stejná jako ta dostupná v souboru /proc/net/wireless:\n"
-"kvalita připojení, síla signálu a úroveň šumu.\n"
-"\n"
-"Více informací viz manuálová stránka iwpspy(8)."
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "dodatečné parametry příkazu lwpriv"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-"Příkaz lwpriv umožňuje nastavit volitelné (privátní) parametry rozhraní\n"
-"bezdrátové sítě.\n"
-"\n"
-"Příkaz lwpriv nakládá s parametry a nastavením specifickými pro každý "
-"ovladač\n"
-"(na rozdíl od příkazu iwconfig který nakládá s obecnými parametry).\n"
-"\n"
-"Teoreticky by měly být informace o příkazech specifických pro jednotlivá "
-"rozhraní\n"
-"dostupné v dokumentaci pro každý z ovladačů.\n"
-"\n"
-"Více informací viz manuálová stránka iwpriv(8)."
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Frekvence má povolené přípony k, M nebo G (například \"2,46G\" pro frekvenci "
-"2,46 GHz) nebo přidejte dostatek '0' (nul)."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Intenzita má povolené přípony k, M nebo G (např. \"11M\" nebo 11M) nebo "
-"přidejte dostatečný počet '0' (nul)."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Prosím zadejte název vašeho počítače.\n"
-"Tento název musí být úplný, jako 'mybox.mylab.myco.com'.\n"
-"Pokud používáte bránu(gateway), můžete také zadat její adresu"
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr "Jedním s posledních kroků je vložení IP adresy pro DNS server(y)."
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Název počítače (volitelné)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Název počítače"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "DNS server 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "DNS server 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "DNS server 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "Prohledávaná doména"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr "Prohledávaná doména bude implicitně nastavena podle názvu počítače"
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Brána (např. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Zařízení brány (gateway)"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresa serveru DNS by měla být ve tvaru 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Adresa brány by měla být ve tvaru 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-"Pokud chcete, zadejte název počítače pro Zeroconf.\n"
-"Pod tímto názvem bude váš počítač nabízet všechny\n"
-"své sdílené zdroje, které nejsou spravovány sítí.\n"
-"Na většině sítí není tento název nutný."
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Název počítače pro Zeroconf"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Název počítače pro Zeroconf nemůže obsahovat \"tečku\""
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Máte nastaveno více způsobů, jak se připojit k Internetu.\n"
-"Vyberte si jeden, který chcete použít.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Internetové připojení"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Konfigurace je ukončena, chcete toto nastavení použít?"
-
-#: network/netconnect.pm:1439
-#, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Chcete povolit uživatelům startovat připojení?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Chcete se automaticky připojovat po startu počítače?"
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "Automaticky při startu"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr "Pomocí Síťového apletu v systémovém panelu"
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr "Ručně (rozhraní bude stejně aktivováno při startu)"
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Jak chcete vytáčet toto spojení?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Je potřeba restartovat síť. Chcete provést restart?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Nastavení sítě"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Vyskytl se problém při restartu sítě: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Chcete se nyní pokusit připojit k internetu?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Testuji připojení k internetu..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Počítač je nyní připojen k internetu"
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Z bezpečnostních důvodů bude spojení ukončeno."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nepodařilo se připojit k Internetu.\n"
-"Pokuste se překonfigurovat dané připojení."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Gratulujeme, konfigurace sítě a internetu je ukončena.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Doporučujeme po tomto kroku restartovat X Window,\n"
-"aby se předešlo problémům se změnou názvu počítače."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Vyskytl se problém během konfigurace.\n"
-"Otestujte připojení k Internetu pomocí net_monitor nebo mcc. Pokud není "
-"spojení funkční, bude potřeba asi znovu načíst konfiguraci"
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Protože provádíte instalaci po síti, je již síť nastavena.\n"
-"Klepněte na Ok pro zachování nastavení nebo klepněte na Zrušit pro nové "
-"nastavení připojení Internetu a k síti.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"Nastala neočekávaná chyba:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Nastavení proxy"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy by měla být http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL by mělo začínat znaky 'ftp:' nebo 'http:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Našel jsem existující nastavení firewallu!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Varování! Bylo nalezeno existující nastavení firewallu. Po instalaci může "
-"být zapotřebí nějaká ruční úprava."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"Zadejte prosím název rozhraní, které je připojeno k Internetu.\n"
-"\n"
-"Příklady:\n"
-"\t\tppp+ pro modem nebo pro DSL připojení,\n"
-"\t\teth0 nebo eth1 pro připojení přes kabel,\n"
-"\t\tippp+ pro isdn připojení.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Vložte disketu"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Vložte disketu formátovanou systémem FAT do disketové jednotky %s s %s v "
-"kořenovém adresáři a stiskněte %s"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Chyba při přístupu na disketu, zařízení %s nelze připojit"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "chyba připojování: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Rozšířené diskové oddíly nejsou na tomto systému podporovány"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Ve tabulce diskových oddílů je mezera, ale nemohu ji použít.\n"
-"Jediné řešení je přesunout primární oddíly tak, abyste měli mezeru vedle\n"
-"rozšířených oddílů."
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Obnova ze souboru %s neuspěla: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Špatný záložní soubor"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Chyba při zapisování do souboru %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"S pevným diskem se stalo něco špatného. \n"
-"Test na integritu dat selhal. \n"
-"To znamená, že zápis na tento disk může skončit nepředvídaně a poškodit data."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "musíte mít"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "důležité"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "nejméně důležité"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "nedůležité"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "může se hodit"
-
-#: pkgs.pm:481
-#, c-format
-msgid "Downloading file %s..."
-msgstr "Stahuji soubor %s..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(na %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(na tomto počítači)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Nastaveno na jiném počítači"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Na serveru CUPS \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Výchozí)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Tisk bez ukládání do fronty"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Démon pro tiskárny"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LprNG - LPR Nové generace"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LprNG"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Tiskový systém pro Unix"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Tiskový systém pro Unix (vzdálený server)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "Vzdálený CUPS"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Neznámý model"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Místní tiskárna"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Vzdálená tiskárna"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Tiskárna na vzdáleném CUPS serveru"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Tiskárna na vzdálený lpd serveru"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Síťová tiskárna (TCP/Socket)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Tiskárna na serveru Windows 95/98/NT"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Tiskárna na Netware serveru"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Zadejte URI tiskového zařízení"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Poslat tiskovou úlohu do příkazu"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "doporučeno"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Neznámý model"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "Nastaveno na tomto počítači"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " na paralelním portu #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", USB tiskárna #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", USB tiskárna"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", tiskárna HP na paralelním portu"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", tiskárna HP na USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", tiskárna HP na HP JetDirect"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", tiskárna HP"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", multifunkční zařízení na paralelním portu #%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", multifunkční zařízení na paralelním portu"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", multifunkční zařízení na USB"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multifunkční zařízení na HP JetDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", multifunkční zařízení"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", při tisku na %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " na serveru LPD \"%s\", tiskárna \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP hostitel \"%s\", port %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " na serveru SMB/Windows \"%s\", sdílená jako \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " na serveru Novell \"%s\", tiskárna \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", používá příkaz %s"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Paralelní port #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "USB tiskárna #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "USB tiskárna"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "Tiskárna HP na paralelním portu"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "Tiskárna HP na USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "Tiskárna HP na HP JetDirect"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "Tiskárna HP"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Multifunkční zařízení na paralelním portu #%s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "Multifunkční zařízení na paralelním portu"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "Multifunkční zařízení na USB"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "Multifunkční zařízení na HP JetDirect"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Multifunkční zařízení"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Tisk na %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "LPD server \"%s\", tiskárna \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "TCP/IP hostitel \"%s\", port %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "SMB/Windows  server \"%s\", sdílená jako \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Novell server \"%s\", tiskárna \"%s\""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "Používá příkaz %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Přímý tisk (bez ovladače)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Lokální síť(ě)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Rozhraní \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Síť %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Počítač %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Tiskárna HP LaserJet 1000 potřebuje po spuštění nahrát firmware. Stáhněte si "
-"z webových stránek HP ovladače pro Windows (firmware na dodávaném CD s "
-"tiskárnou nefunguje) a vyextrahujte z nich pomocí programu 'unzip' soubor "
-"'sihp1000.img'. Tento soubor nakopírujte do adresáře '/etc/printer'. Skript "
-"pro automatický upload potom tento soubor automaticky nahraje do tiskárny "
-"kdykoliv bude připojena a zapnuta.\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "Nastavení tiskáren přes CUPS"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Zde můžete rozhodnout, zda tiskárny připojené k tomuto počítači budou "
-"vzdáleně přístupné a z kterých vzdálených počítačů."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Můžete se rozhodnout, zda všechny tiskárny na vzdálených počítačích budou "
-"dostupné i na tomto počítači"
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Tiskárny na tomto počítači jsou přístupné jiným vzdáleným počítačům"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automaticky nalézt dostupné tiskárny na vzdálených počítačích"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Tiskárny sdílené na počítačích/síti: "
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Vlastní nastavení"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Nejsou žádné vzdálené počítače"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Další CUPS servery: "
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Pro získání přístupu na vzdálené CUPS servery v lokální síti potřebujete "
-"pouze povolit volbu \"Automaticky nalézt dostupné tiskárny na vzdálených "
-"počítačích\". CUPS server následně informuje o těchto tiskárnách. Všechny "
-"známé tiskárny potom budou vypsány v sekci \"Vzdálené tiskárny\" v hlavním "
-"okně aplikace PrinterDrake. Pokud CUPS server(y) nejsou ve vaší lokální "
-"síti, musíte zadat IP adresu a volitelně také číslo portu, aby bylo možné "
-"uvedené informace ze serverů získat."
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Tiskový režim pro japonský text"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Tato volba dovoluje tisk textových souborů v japonštině. Použijte tuto "
-"funkci pouze pokud opravdu potřebujete tisknout v japonštině, pokud je "
-"zvolena, nelze už tisknout národní znaky v latince a nelze nastavovat "
-"okraje, velikost fontů, atd. Toto nastavení se týká pouze tiskáren "
-"definovaných na tomto počítači. Pokud chcete tisknout japonské texty na "
-"vzdálené tiskárně, musíte tuto funkci aktivovat na vzdáleném počítači."
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatická korekce nastavení pro CUPS"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Pokud je tato volba zvolena, pak je při každém startu CUPS démona "
-"automaticky zajištěno že\n"
-"\n"
-"- pokud je nainstalován LPD/LPRng, nebude CUPS přepisovat /etc/printcap\n"
-"\n"
-"- pokud chybí soubor /etc/cups/cupsd.conf, tak bude vytvořen\n"
-"\n"
-"- pokud jsou rozesílány informace do sítě, nebudou obsahovat v názvu serveru "
-"\"localhost\".\n"
-"\n"
-"Pokud některá volba způsobuje problémy, vypněte tuto volbu, ale potom si na "
-"tyto zmíněné body musíte dávat pozor."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr "Vzdálený server CUPS bez lokálního démona CUPS"
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Zapnuto"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Vypnuto"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"V tomto režimu bude lokální démon CUPS zastaven a všechny požadavky na tisk "
-"budou přímo přeposlány na server zadaný níže. Vezměte na vědomí, že v "
-"takovém případě není možné definovat lokální tiskové fronty a pokud není "
-"uvedený server dostupný, nebude možné z tohoto počítače tisknout vůbec."
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Sdílení lokálních tiskáren"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Zde jsou počítače a sítě, na kterých budou dostupné lokální tiskárna(y):"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Přidat počítač/síť"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Upravit vybraný počítač/síť"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Odstranit vybraný počítač/síť"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "IP adresa počítače/sítě:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Vyberte síť nebo počítač, na kterém budou lokální tiskárny dostupné:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "Chybí IP adresa počítače/sítě."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Zadaná IP adresa pro počítač nebo síť není správná.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Příklady správných IP adres:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Tento počítač/síť je již na seznamu, nelze jej znova přidat.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Přístup k tiskárnám na vzdáleném CUPS serveru"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Přidejte sem ty CUPS servery, ze kterých budete chtít využívat tiskárny. Je "
-"to nutné pouze v případě, že tyto servery nešíří informace informace o "
-"tiskárnách v lokální síti."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Přidat server"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Upravit vybraný server"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Odstranit vybraný server"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Zadejte IP adresu a port počítače, ze kterého budete chtít využívat tiskárny."
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Pokud není zadán žádný port, bude jako výchozí použit port 631."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "Chybí IP adresa serveru!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Zadaná IP adresa není správná.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Číslo portu musí být celé číslo!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Tento server je již na seznamu, nelze jej tedy opět přidat.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Zapnuto, název nebo IP adresa vzdáleného serveru:"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Chybí název nebo IP adresa serveru CUPS."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Načítám data k tisku ..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Restartuji CUPS..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Zvolte připojení tiskárny"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Jak je tiskárna připojena?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"V případě vzdáleného CUPS serveru nemusíte nastavovat tiskárny zde,\n"
-"tiskárny budou automaticky detekovány."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"VAROVÁNÍ: Není aktivní žádné připojení do lokální sítě. Vzdálené tiskárny "
-"nelze zjistit ani otestovat!"
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr "Autodetekce tiskárny (lokální, TCP/soket, tiskárny SMB a URI zařízení)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr "Upravit prodlevu při hledání síťové tiskárny"
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr "Zadejte prodlevu při hledání síťové tiskárny (v ms)."
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-"Čím delší prodlevu zvolíte, tím spolehlivější hledání síťové tiskárny bude. "
-"Hledání pak ale může trvat dlouho, zvláště pokud je na síti mnoho počítačů s "
-"lokálními firewally."
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Prodleva musí být kladné celé číslo!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Zkoumám váš počítač..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "a jedna neznámá tiskárna"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "a %d neznámých tiskáren"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Následující tiskárny\n"
-"\n"
-"%s %s\n"
-"jsou přímo připojeny k vašemu počítači"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Následující tiskárny\n"
-"\n"
-"%s %s\n"
-"jsou přímo připojeny k vašemu počítači"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Následující tiskárna\n"
-"\n"
-"%s %s\n"
-"je přímo připojena k vašemu počítači"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Našel jsem jednu neznámou tiskárnu přímo připojenou k vašemu počítači"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Našel jsem %d neznámých tiskáren přímo připojených k vašemu počítači"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Na vašem počítači nebyla nalezena žádná přímo připojená tiskárna"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Zkontrolujte to, že všechny tiskárny jsou připojeny a zapnuty).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Chcete povolit tisk na tiskárnách vypsaných výše nebo na tiskárnách v "
-"lokální síti?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Chcete povolit tisk na tiskárnách v lokální síti?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Chcete povolit tisk na tiskárnách vypsaných výše?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Opravdu chcete nastavit tisk na tomto počítači?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"POZNÁMKA: V závislosti na modelu tiskárny a tiskovém systému je potřeba "
-"nainstalovat dalších %d MB potřebného software."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Vyhledávám nové tiskárny..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "Nalezena tiskárna na %s..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " na "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Výběr modelu tiskárny"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Jaký model tiskárny máte?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"PrinterDrake nemohl zjistit model vaší tiskárny %s. Prosím vyberte si "
-"odpovídající model ze seznamu."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Pokud není tiskárna v seznamu, vyberte kompatibilní nebo podobný model "
-"(podívejte se do manuálu)"
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "Nastavuji tiskárnu na %s..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Nastavuji tiskárnu \"%s\"..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Přidat novou tiskárnu"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Vítejte v průvodci nastavením tisku\n"
-"\n"
-"Tento průvodce vám pomůže nainstalovat lokální nebo vzdálené tiskárnu(y), "
-"které je možné následně využít na vzdáleném počítači na síti.\n"
-"\n"
-"Budete dotázáni na všechny potřebné informace pro nastavení tiskárny, můžete "
-"si vybrat se všech tiskových ovladačů a typů připojení tiskárny."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Vítejte v Průvodci nastavením tiskárny\n"
-"\n"
-"Tento průvodce vám pomůže nainstalovat vaši tiskárnu nebo tiskárny připojené "
-"k tomuto počítači, přímo k síti, nebo sdílené na počítači s Windows.\n"
-"\n"
-"Pokud máte tiskárnu nebo tiskárny připojené k tomuto počítači, zapojte je "
-"prosím a zapněte je; pak mohou být automaticky nalezeny. Vaše síťové "
-"tiskárny nebo tiskárny sdílené počítači s Windows musí být rovněž zapnuty a "
-"připojené k síti, mají-li být automaticky nalezeny.\n"
-"\n"
-"Automatická detekce tiskáren připojených k síti probíhá podstatně déle než "
-"automatická detekce tiskáren pouze lokálně připojených k tomuto počítači. "
-"Pokud nepotřebujete automatickou detekci tiskáren na síti, nebo tiskáren "
-"sdílených počítači s Windows, pak tuto autodetekci vypněte.\n"
-"\n"
-"Pokud jste připraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
-"tlačítko \"Zrušit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Vítejte v Průvodci nastavením tiskárny\n"
-"\n"
-"Tento průvodce vám pomůže nainstalovat vaši tiskárnu nebo tiskárny připojené "
-"k tomuto počítači.\n"
-"\n"
-"Pokud máte tiskárnu nebo tiskárny připojené k tomuto počítači, zapojte je "
-"prosím a zapněte je; pak mohou být automaticky nalezeny. \n"
-"\n"
-"Pokud jste připraveni, klepněte na tlačítko \"Další\", nebo klepněte na "
-"tlačítko \"Zrušit\" pokud nechcete v tuto chvíli tiskárnu(y) nastavovat."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Vítejte v Průvodci nastavením tiskárny\n"
-"\n"
-"Tento průvodce vám pomůže nainstalovat vaši tiskárnu nebo tiskárny připojené "
-"k tomuto počítači nebo přímo k síti.\n"
-"\n"
-"Pokud máte tiskárnu nebo tiskárny připojené k tomuto počítači, zapojte je "
-"prosím a zapněte je; pak mohou být automaticky nalezeny. Vaše síťové "
-"tiskárny musí být rovněž zapnuty a připojené k síti, mají-li být automaticky "
-"nalezeny.\n"
-"\n"
-"Automatická detekce tiskáren připojených k síti probíhá podstatně déle než "
-"automatická detekce tiskáren pouze lokálně připojených k tomuto počítači. "
-"Pokud nepotřebujete automatickou detekci tiskáren na síti, pak tuto "
-"autodetekci vypněte.\n"
-"\n"
-"Pokud jste připraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
-"tlačítko \"Zrušit\" pokud nechcete v tuto chvíli tiskárny nastavovat."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Vítejte v Průvodci nastavením tiskárny\n"
-"\n"
-"Tento průvodce vám pomůže nainstalovat vaši tiskárnu nebo tiskárny připojené "
-"k tomuto počítači.\n"
-"\n"
-"Pokud máte tiskárnu nebo tiskárny připojené k tomuto počítači, zapojte je "
-"prosím a zapněte je; pak mohou být automaticky nalezeny. \n"
-"\n"
-"Pokud jste připraveni, klepněte na tlačítko \"Dále\", nebo klepněte na "
-"tlačítko \"Zrušit\" pokud nechcete v tuto chvíli tiskárnu(y) nastavovat."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Automaticky nalézt tiskárny připojené k tomuto počítači"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Automaticky nalézt tiskárny připojené přímo k lokální síti"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Automaticky nalézt tiskárny sdílené počítači s Microsoft Windows"
-
-#: printer/printerdrake.pm:1151
-#, c-format
-msgid "No auto-detection"
-msgstr "Bez automatického hledání"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Blahopřejeme, tiskárna je nainstalována a nastavena!\n"
-"\n"
-"Tisknout z aplikací lze příkazem \"Tisk\" (obyčejně v menu \"Soubor\").\n"
-"\n"
-"Pokud chcete přidat, odebrat, přejmenovat tiskárnu nebo změnit její výchozí "
-"nastavení (typ zásobníku, kvalita tisku, ...), zvolte \"Tiskárna\" v sekci "
-"\"Hardware\" v ovládacím centru %s."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "Nelze nainstalovat balíčky %s!"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr "Vynechávám autodetekci serverů Windows/SMB"
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Autodetekce tiskárny"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Detekuji zařízení..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", síťová tiskárna \"%s\", port %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", tiskárna \"%s\" na SMB/Windows serveru \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "Nalezeno %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Tiskárna na paralelním portu #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Síťová tiskárna \"%s\", port %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Tiskárna \"%s\" na SMB/Windows serveru \"%s\""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Místní tiskárna"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Lokální tiskárna nenalezena! Pro ruční instalaci tiskárny zadejte název "
-"zařízení/souboru do políčka (Paralelní porty: /dev/lp0, /dev/lp1,... jsou "
-"ekvivalentní LPT1:, LPT2:, ...,první USB tiskárna: /dev/usb/lp0, druhá USB "
-"tiskárna: /dev/usb/lp1,...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Musíte zadat zařízení nebo název souboru!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Nenalezena žádná tiskárna!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Místní tiskárny"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Dostupné tiskárny"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Následující tiskárna byla automaticky detekována. "
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Pokud není mezi nimi požadovaná tiskárna, zadejte do políčka název zařízení/"
-"název souboru"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Jako alternativu můžete zadat do políčka název zařízení/název souboru"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Zde je seznam automaticky detekovaných tiskáren. "
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Vyberte si tiskárnu, kterou chcete nastavit nebo zadejte do políčka název "
-"zařízení/název souboru"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Vyberte si tiskárnu, na kterou budou směrovány tiskové úlohy nebo zadejte do "
-"políčka název zařízení/název souboru"
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Konfigurace této tiskárny je plně automatická. Pokud nebyla tiskárna správně "
-"detekována nebo preferujete vlastní nastavení tisku, zvolte \"Ruční "
-"konfigurace\"."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Nyní není povolena žádná alternativa"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Vyberte si tiskárnu, kterou chcete nastavit. Konfigurace těchto tiskáren je "
-"plně automatická. Pokud nebyla tiskárna správně detekována nebo preferujete "
-"vlastní nastavení tisku, zvolte \"Ruční konfigurace\"."
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Vyberte tiskový port, kam budou směrovány tiskové úlohy."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Vyberte si port, ke kterému je tiskárna připojena nebo zadejte do políčka "
-"název zařízení/název souboru"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Vyberte port, ke kterému je vaše tiskárna připojena."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Paralelní porty: /dev/lp0, /dev/lp1,... je ekvivalentní LPT1:, LPT2:, ...,"
-"první USB tiskárna: /dev/usb/lp0, druhá USB tiskárna: /dev/usb/lp1,...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Musíte vybrat/zadat tiskárnu/zařízení!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "Přerušuji"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Možnosti vzdálené lpd tiskárny"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Abyste mohli používat vzdálenou tiskovou frontu lpd, musíte zadat název "
-"tiskového serveru a název tiskárny, kam má být posílán tisk."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Název vzdáleného počítače"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Název vzdálené tiskárny"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Chybí název vzdáleného počítače!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Chybí název vzdálené tiskárny!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Informace"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Nalezen model: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Zkoumám síť...."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", tiskárna \"%s\" na serveru \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Tiskárna \"%s\" na serveru \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Možnosti SMB (Windows 9x/NT) tiskárny"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Abyste mohli tisknout na SMB tiskárně, musíte zadat název SMB počítače"
-"(Pozor! To může být odlišné od jeho TCP/IP názvu) a možná i IP adresu "
-"tiskového serveru, název sdílené tiskárny, vhodné uživatelské jméno, heslo a "
-"informace o pracovní skupině."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Pokud byla požadovaná tiskárna automaticky nalezena, vyberte ji jednoduše "
-"ze seznamu a pokud je to potřeba, doplňte uživatelské jméno, heslo, a "
-"pracovní skupinu."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "Název SMB serveru"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP adresa SMB serveru"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Sdílené jméno"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Pracovní skupina"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Automaticky nalezeno"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Musí být zadán buď název serveru nebo jeho IP adresa!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Chybí název pro sdílení přes Sambu!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "BEZPEČNOSTNÍ VAROVÁNÍ!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Provádíte nastavení tisku s účtem na systému Windows. Díky chybě v klientu "
-"protokolu Samba je heslo při tisku posláno jako čistý text z příkazové "
-"řádky. Je tudíž možné, aby kdokoliv viděl toto heslo na obrazovce když si "
-"zadá příkaz např. \"ps auxwww\".\n"
-"\n"
-"Doporučujeme používat jednu z následujících alternativ (ve všech případech "
-"je dobré mít nastaven přístup pouze z počítačů z lokální sítě, respektive za "
-"firewallem):\n"
-"\n"
-"Použít účet, který nemá nastaven žádné heslo, jako je \"GUEST\" nebo "
-"speciální účet pouze pro účely tisku. Neodstraňujte ochranu heslem z běžného "
-"účtu nebo dokonce z administrátorského účtu.\n"
-"\n"
-"Nastavte tiskárnu na Windows serveru tak, aby fungovala pod LPD protokolem. "
-"Potom nastavte tisk na této tiskárně pomocí typy spojení \"%s\" v aplikaci "
-"PrinterDrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Nastavit na serveru s Windows tiskárnu, která bude přístupná pomocí IPP "
-"protokolu a nastavit tisk z tohoto počítače pomocí spojení \"%s\" v aplikaci "
-"PrinterDrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Připojit tiskárnu k Linux serveru a nechat počítač(e) s Windows pracovat "
-"jako klienty.\n"
-"\n"
-"Chcete opravdu pokračovat v nastavení tiskárny tímto způsobem?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Možnosti NetWare tiskárny"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Abyste mohli tisknout na NetWare tiskárně, musíte zadat název NetWare "
-"serveru (Pozor! To může být odlišné od jeho názvu pro TCP/IP!), název "
-"tiskové fronty tiskárny, kterou chcete používat, uživatelské jméno a heslo."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Tiskový server"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Název tiskové fronty"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "Chybí název pro sdílení přes NCP!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "Chybí název tiskové fronty pro NCP!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", počítač \"%s\", port %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Počítač \"%s\", port %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Možnosti tiskárny pro TCP/Socket"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Vyberte ze seznamu jednu z automaticky nalezených tiskáren nebo zadejte do "
-"políček název nebo IP adresu tiskárny a volitelně číslo portu (výchozí je "
-"9100)."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Abyste mohli tisknout na TCP nebo soketové tiskárně, musíte zadat název nebo "
-"IP adresu tiskárny a volitelně i číslo portu (výchozí je 9100). V případě "
-"serverů HP JetDirect je číslo portu obvykle 9100, u jiných serverů může být "
-"jiné. Podívejte se do manuálu k vašemu hardware."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Chybí název nebo IP adresa tiskárny!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Název nebo IP adresa tiskárny"
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Obnovuji seznam URI zařízení...."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "URI Tiskového Zařízení"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Zde lze přímo zadat URI pro přístup k tiskárně. URI musí splňovat buď "
-"specifikaci CUPS nebo Foomatic. Také pamatujte na to, že všechny URI nejsou "
-"podporovány ve všech tiskových správcích."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Musí být zadáno správné URI!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "Poslat do příkazu"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Zde můžete zadat libovolný příkaz, do kterého bude posílám výstup z tiskové "
-"úlohy místo přímého odeslání na tiskárnu."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Příkazová řádka"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "Musí být zadán nějaký příkaz!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-"Na mnoha tiskárnách společnosti HP jsou k dispozici speciální funkce, mezi "
-"které patří servisní funkce (kontrola stavu inkoustu, čištění tiskových "
-"trysek, zarovnání tiskových hlav, ...) na většině ne příliš starých "
-"inkoustových tiskáren, skenování na multifunkčních zařízeních a přístup k "
-"paměťovým kartám na tiskárnách vybavených paměťovou čtečkou."
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-"Chcete-li na vaší tiskárně HP využívat těchto funkcí navíc, je nutné ji "
-"nastavit s odpovídajícím software:"
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-"Buď můžete zvolit novější HPLIP, který umožňuje spravovat tiskárnu pomocí "
-"jednoduše použitelné grafické aplikace \"Toolbox\" a plně barevný tisk bez "
-"okrajů na všech čtyřech stranách na novějších modelech tiskáren PhotoSmart "
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-"nebo starší HPOJ, který umožňuje pouze skenování a přístup ke čtečkám "
-"paměťových karet, ale může fungovat tam, kde software HPLIP selže. "
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-"Kterou variantu software chcete zvolit? (Pro jiné než HP tiskárny nevolte "
-"žádnou z nich) "
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Je vaše tiskárna multifunkční zařízení od HP nebo od Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 se skenerem, DeskJet 450, Sony "
-"IJP-V100) nebo HP PhotoSmart či HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Instaluji balíček %s..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr "Na %s bude možné pouze tisknout."
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-"Nelze odstranit váš starý soubor s nastavením HPOJ %s pro tiskárnu %s! "
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr "Odstraňte prosím tento soubor ručně a restartujte službu HPOJ."
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Testuji zařízení a nastavuji %s..."
-
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Kterou tiskárnu chcete nastavit pro HPLIP?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instaluji balíčky pro SANE..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr "Na %s nebude možné skenovat."
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr "Užívání a údržba tiskárny %s"
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instaluji balíčky pro mtools..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "Přístup k paměťové kartě s fotkami nebude na zařízení %s možný."
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Vyhledávám multifunkční zařízení od HP"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Přístup k paměťové kartě na multifunkčním zařízení od HP"
-
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr "Nastavuji zařízení..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Nastavuji tiskový port využitelný pro CUPS..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Načítám databázi tiskáren ..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Zadejte název tiskárny a komentář"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Název fronty může obsahovat pouze písmena, číslice a podtržítko"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Tiskárna s názvem %s již existuje,\n"
-"chcete opravdu přepsat její konfiguraci?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-"Název tiskárny \"%s\" je delší než 12 znaků, což může způsobit nedostupnost "
-"tiskárny z prostředí Windows. Opravdu chcete použít tento název?"
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Každá tiskárna potřebuje název (např. \"tiskarna\"). Popis a umístění nemusí "
-"být vyplněny. Jsou to komentáře pouze pro uživatele."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Název tiskárny"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Popis"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Umístění"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Načítám databázi tiskáren ..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Model tiskárny"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"PrinterDrake provedl porovnání modelu tiskárny, který byl zjištěn při auto-"
-"detekci s modelem obsaženým v jeho databázi a nabídl nejlepší řešení. Tato "
-"volba může být špatná, zvlášť pokud není tiskárna obsažena v databázi. "
-"Zkontrolujte, zda je volba správná a klepněte na \"Zvolený model je správný"
-"\" a pokud není, volte \"Vybrat model ručně\". V další obrazovce potom bude "
-"možné vybrat model tiskárny ručně.\n"
-"\n"
-"Pro vaši tiskárnu PrinterDrake nalezl:\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Zvolený model je správný"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Vybrat model ručně"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Zkontrolujte prosím, zda PrinterDrake provedl automatickou detekci modelu "
-"správně. Pokud je vyznačen nesprávný model, můžete ho změnit výběrem ze "
-"seznamu nebo zvolte \"Přímý tisk\"."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "Instalovat PPD soubor od výrobce"
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-"Každá PostScriptová tiskárna je dodávána se souborem PPD, který popisuje "
-"nastavení a vlastnosti tiskárny."
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"Tento soubor lze obvykle nalézt někde na CD spolu s ovladači pro Windows "
-"nebo Mac, které jsou k tiskárně dodávány."
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr "Soubory PPD lze také nalézt na webových stránkách výrobce."
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"Pokud máte na svém počítači instalován systém Windows, lze soubor PPD také "
-"nalézt na oddílu s Windows."
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-"Instalace souboru PPD tiskárny a jeho použití při nastavování tiskárny "
-"zpřístupní všechny volby, které podporuje hardware tiskárny"
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"Zde můžete vybrat soubor PPD, který se má nainstalovat na vašem počítači, a "
-"který bude použit při nastavování vaší tiskárny."
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "Instalovat soubor PPD z"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "Diskety"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "Jiné umístění"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "Vyberte soubor PPD"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "Soubor PPD %s neexistuje nebo není čitelný!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "Soubor PPD %s neodpovídá specifikacím PPD!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "Instaluji soubor PPD..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Nastavení pro OKI win-tiskárnu"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Nyní nastavujete laserovou tiskárnu OKI winprinter. Tyto tiskárny používají "
-"velmi specifický komunikační protokol a mohou pracovat pouze pokud jsou "
-"připojeny k prvnímu paralelnímu portu. Pokud je tiskárna připojena na jiný "
-"port, nebo se tiskne přes server, připojte tiskárnu na první paralelní port. "
-"Jinak tisk nebude pracovat. Typ připojení bude ovladač ignorovat."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Nastavení inkoustové tiskárny Lexmark"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkoustové tiskárny dodávané firmou Lexmark podporují pouze tisk na lokální "
-"tiskárně, takže nelze tisknout přes vzdálený server. Prosím připojte "
-"tiskárnu na lokální port nebo ji nastavte na tom počítači, ke kterému bude "
-"připojena."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Aby bylo možné při tomto nastavení tisknout na inkoustových tiskárnách od "
-"firmy Lexmark, je potřeba mít tiskový ovladač poskytovaný společností "
-"Lexmark (http://www.lexmark.com/). Klepněte na odkaz \"Drivers\", vyberte "
-"váš model tiskárny, a poté zvolte Linux jako operační systém. Ovladače jsou "
-"v RPM balíčcích nebo skripty shellu s interaktivní grafickou instalací. Tu "
-"ale k nastavení vašeho systému nepotřebujete. Ukončete instalační program "
-"ihned po odsouhlasení licence. Pak můžete vytisknout stránku s nastavením "
-"tiskových hlav programem \"lexmarkmaintain\" a nastavit zarovnání tiskové "
-"hlavy pomocí tohoto programu."
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Nastavení tiskárny Lexmark X125"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Ovladač pro tuto tiskárnu podporuje pouze tisk na tiskárně lokálně připojené "
-"pomocí USB, takže nelze tisknout přes vzdálený počítač nebo server. Prosím "
-"připojte tiskárnu na lokální USB port nebo ji nastavte na počítači, ke "
-"kterému bude připojena."
-
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Nastavení Samsung ML/QL-85G"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Ovladač pro tuto tiskárnu podporuje pouze tisk na tiskárně lokálně připojené "
-"pomocí prvního paralelního portu, takže nelze tisknout přes vzdálený počítač "
-"nebo server nebo na tiskárnách na jiných paralelních portech. Prosím "
-"připojte tiskárnu na první lokální paralelní port nebo ji nastavte na "
-"počítači, ke kterému bude připojena."
-
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Nastavení Canon LBP-460/660"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Upload firmware pro HP LaserJet 1000"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Výchozí nastavení pro tiskárnu\n"
-"\n"
-"Ujistěte se, že typ stránky a typ inkoustu/režim tisku (pokud je) a také "
-"hardwarová konfigurace laserové tiskárny (paměť, duplexní jednotka, externí "
-"podavač) jsou nastaveny správně. Při tisku ve velmi vysoké kvalitě/rozlišení "
-"bude tisk zřejmě pomalejší."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Výchozí nastavení tiskárny"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Hodnota %s musí být celé číslo!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Hodnota %s musí být číslo!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Hodnota %s je mimo rozsah!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Chcete opravdu nastavit tiskárnu \"%s\"\n"
-"jako výchozí?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Zkušební stránka"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vyberte si zkušební stránku, kterou chcete vytisknout.\n"
-"Poznámka: tisk zkušební stránky s fotografií může trvat velmi dlouho nebo se "
-"na tiskárně s malou pamětí nemusí podařit vůbec. Ve většině případů stačí "
-"vytisknout běžnou zkušební stránku."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Bez zkušební stránky"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Tisk"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Standardní zkušební stránka"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativní zkušební stránka (Letter)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativní zkušební stránka (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Zkušební stránka s fotografií"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Netisknout zkušební stránku"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Tisknu zkušební stránku(y)..."
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr "Vynechávám zkušební stránku s fotografií."
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Zkušební stránka(y) byla(y) poslána(y) na tiskárnu.\n"
-"Může chvíli trvat než začne tisk.\n"
-"Stav tisku:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Zkušební stránka byl poslána na tiskárnu.\n"
-"Může chvilku trvat než začne tisk.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Proběhl tisk správně?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Přímý tisk na tiskárnu"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Vytisknout soubor z příkazové řádky (terminálového okna) lze buď příkazem\n"
-"\"%s<soubor>\" nebo přes grafické nástroje: \"xpp <soubor> nebo \"kprinter "
-"<soubor>\". Grafické nástroje umožňují jednoduše vybrat tiskárny a měnit "
-"jejich parametry.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tyto příkazy lze nastavit do políčka \"Příkazy tisku\" v dialogu tisku ve "
-"většině aplikací, ale nezadává se zde název souboru, které je pokaždé jiné v "
-"závislosti na dané aplikaci.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Příkaz \"%s\" dovoluje modifikovat volby pro každou tiskovou úlohu. "
-"Jednoduše zadejte potřebné nastavení do příkazové řádky, např. \"%s<soubor>"
-"\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Všechny možnosti dostupné pro současnou tiskárnu jsou vypsány níže, nebo "
-"klepněte na tlačítko \"Možnosti tiskárny\".%s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Zde je seznam dostupných voleb pro nastavení tisku pro aktuální tiskárnu:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Pro vytištění souboru z příkazové řádky (v terminálovém okně) použijte "
-"příkaz \"%s <soubor>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Tento příkaz lze nastavit do políčka \"Příkazy tisku\" v dialogu tisku ve "
-"většině aplikací, ale nezadává se zde název souboru, které je pokaždé jiné v "
-"závislosti na dané aplikaci.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Všechny možnosti tisku pro současnou tiskárnu jsou zobrazeny níže, nebo "
-"klepněte na tlačítko \"Možnosti tiskárny\"."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Pro vytištění souboru z příkazové řádky (v terminálovém okně) použijte "
-"příkaz \"%s <soubor>\" nebo \"%s <soubor>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Pro nastavení možností a ke správě tiskových úloh lze také použít grafické "
-"rozhraní \"xpdq\" .\n"
-"Pokud používáte grafické prostředí KDE, máte na pracovní ploše ikonu "
-"pojmenovanou \"STOP Printer!\", která po klepnutí ihned zastaví všechny "
-"tiskové úlohy. To je vhodné třeba pro případy uvíznutí papíru.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Příkazy \"%s\" a \"%s\" dovolují měnit volby pro každou tiskovou úlohu. "
-"Jednoduše zadejte potřebné nastavení do příkazové řádky, např. \"%s <soubor>"
-"\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Tisk/Skenování/Foto karty na \"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Tisk/Skenování na \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Tisk/Přístup k foto kartám na \"%s\""
-
-#: printer/printerdrake.pm:3896
-#, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Užívání a údržba tiskárny \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Tisk na tiskárně \"%s\""
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Vytisknout seznam voleb"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-"Vaše tiskárna %s je nastavena pro ovladač HPLIP. Díky tomu je na vaší "
-"tiskárně podporována celá řada speciálních funkcí.\n"
-"\n"
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-"Skener na vaší tiskárně lze použít s běžným software využívajícím rozhraní "
-"SANE, například Kooka nebo XSane (obě lze nalézt v menu Multimédia/Grafika). "
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-"Chcete-li sdílet skener na vaší síti, spusťte nástroj Scannerdrake (lze též "
-"spustit z Ovládacího centra pod položkou Hardware/Nastavení skeneru).\n"
-"\n"
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-"Ke čtečkám paměťových karet na vaší tiskárně lze přistupovat jako k "
-"jakémukoli jinému úložnému zařízení na rozhraní USB. "
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-"Po vložení paměťové karty by se měla na pracovní ploše objevit ikona pevného "
-"disku, pomocí které lze ke kartě přistupovat.\n"
-"\n"
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-"Ke čtečkám paměťových karet na vaší tiskárně lze přistupovat pomocí software "
-"HP Printer Toolbox (v menu Systém/Sledování/HP Printer Toolbox) po stisknutí "
-"tlačítka \"Access Photo Cards...\" na záložce \"Functions\". "
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-"Tento přístup je ale velmi pomalý, načítání obrázků přímo z fotoaparátu nebo "
-"ze čtečky karet na rozhraní USB je obvykle daleko rychlejší.\n"
-"\n"
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-"Ovládací software HP Printer Toolbox (v menu Systém/Sledování/HP Printer "
-"Toolbox) nabízí celou řadu funkcí pro sledování stavu a údržbu vaší tiskárny "
-"%s:\n"
-"\n"
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr " - informace o stavu tiskárny a hladině inkoustu\n"
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr " - čištění inkoustových hlav\n"
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr "- zarovnání tiskových hlav\n"
-
-#: printer/printerdrake.pm:3944
-#, c-format
-msgid " - Color calibration\n"
-msgstr " - kalibrace barev\n"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"Multifunkční zařízení od HP bylo automaticky nastaveno pro možnost "
-"skenování. Nyní lze skenovat z příkazového řádku příkazem \"scanimage"
-"\" (příkazem \"scanimage -d hp:%s\" zvolíte požadovaný skener, pokud jich "
-"máte více) nebo z grafického prostředí pomocí \"xscanimage\" nebo \"xsane\". "
-"Pokud používáte program GIMP, můžete také skenovat výběrem z nabídky \"Soubor"
-"\"/\"Získat\". Více informací získáte také příkazem \"man scanimage\" "
-"spuštěným na příkazové řádce.\n"
-"\n"
-"Pro nastavení skenování pomocí tohoto zařízení není nutné použít aplikaci "
-"\"scannerdrake\". Aplikaci \"scannerdrake\" musíte použít pouze v případě, "
-"chcete-li sdílet váš skener na síti."
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Vaše tiskárna byla automaticky nastavena tak, že máte ze svého PC přístup ke "
-"čtečce karty. Nyní můžete přistupovat ke svým fotografickým kartám pomocí "
-"grafického programu \"MtoolsFM\" (Menu: \"Aplikace\" -> \"Souborové nástroje"
-"\" -> \"Správce souborů MTools\") nebo z příkazové řádky pomocí nástroje "
-"\"mtools\" (zadejte \"man mtools\", chcete-li získat více informací). "
-"Souborový systém vaši karty naleznete pod písmenem zařízení \"p:\", případně "
-"dalších písmenech, pokud máte více tiskáren HP se čtečkou karet. V programu "
-"\"MtoolsFM\" můžete přepínat mezi písmeny zařízení pomocí políčka v pravém "
-"horním rohu každého výčtu souborů."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Přenést konfiguraci tiskárny"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Konfiguraci tiskárny, kterou jste provedli pro frontu %s lze přenést na "
-"frontu %s, tj. na současnou frontu. Všechna nastavená data (název tiskárny, "
-"popis, umístění, typ připojení a další výchozí nastavení) budou přepsána, "
-"ale tiskové úlohy nebudou přeneseny.\n"
-"Ne všechny fronty lze přenést z následujících důvodů:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS nepodporuje tiskárny na serverech Novell nebo tiskárny, které posílají "
-"data na skupinu příkazů.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ podporuje pouze místní tiskárny, vzdálené tiskárny LPD a tisk na "
-"tiskárny přes sokety/TCP.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD ani LprNG nepodporují IPP tiskárny.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Tiskové fronty, které nebyly vytvořeny tímto programem nebo přes \"foomatic-"
-"configure\" nelze přenést."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Také tiskárny používající PPD soubory od jejich výrobců nebo tiskárny s "
-"nativními ovladači pro CUPS nelze přenést."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Označte tiskárnu, kterou chcete přenést a stiskněte \"Přenést\"."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Nepřenášet tiskárny"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Přenést"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Tiskárna s názvem \"%s\" již na straně %s existuje.\n"
-"Klepněte na \"Přenést\" pro přepsání.\n"
-"Také můžete napsat nový název nebo ji přeskočit."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Nový název tiskárny"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "Přenáším %s ..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Byla přenesena výchozí tiskárna (\"%s\"). Má se nastavit jako výchozí také "
-"na vzdáleném tiskovém systému %s?"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Občerstvuji tisková data ...."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Spouštím síť ...."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Nastavit síť nyní"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Síť není nastavena"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Nyní začne konfigurace vzdálené tiskárny. To vyžaduje funkční síťové "
-"spojení, ale síť není zatím nastavena. Pokud budete pokračovat bez nastavení "
-"sítě, nebude možné použít požadovanou tiskárnu. Jak chcete pokračovat?"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Pokračovat bez nastavení sítě"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"Nastavení sítě provedené při instalaci nelze nyní aktivovat.  Zkontrolujte, "
-"zda je síť dostupná po spuštění systému a nastavení opravte v ovládacím "
-"centru %s, v sekci \"Síť a Internet\"/\"Připojení\" a následně nastavte "
-"tiskárnu také v ovládacím centru %s v sekci \"Hardware\"/\"Tiskárna\""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Síť nefunguje a nelze ji spustit. Prosím zkontrolujte nastavení hardware. "
-"Pak se opět pokuste provést nastavení vzdálené tiskárny."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Restartuji tiskový systém ..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "vysoká"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "paranoidní"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Instaluji tiskový systém v bezpečnostní úrovni %s"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Pokoušíte se instalovat tiskový systém %s na počítač, běžící v bezpečností "
-"úrovni %s.\n"
-"\n"
-"Tiskový systém pracuje jako démon (proces na pozadí), který čeká na tiskové "
-"úlohy a zpracovává je. Tento démon je také přístupný ze sítě pro jiné "
-"počítače, takže se může stát předmětem síťového útoku. Proto je vybráno "
-"pouze několik služeb, které jsou v této úrovni spuštěny automaticky při "
-"startu.\n"
-"\n"
-"Chcete opravdu nastavit tiskový systém na tomto počítači?"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Spustit tiskový systém při startu systému"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Tiskový systém (%s) nebude při startu počítače automaticky spuštěn.\n"
-"\n"
-"Je možné, že volba automatického startu byla vypnuta ve vyšší bezpečnostní "
-"úrovni, protože tiskový systém je potenciální nebezpečí pro síťový útok.\n"
-"\n"
-"Chcete nastavit automatický start tiskového systému zpět?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "Ověřují nainstalovaný software..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Odstraňuji %s ..."
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Nelze odstranit tiskový systém %s!"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "Instaluji %s ..."
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Nelze nainstalovat tiskový systém %s!"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"V tomto režimu není k dispozici žádný lokální tiskový systém, všechny "
-"požadavky na tisk jsou směrovány přímo na server zadaný níže. Vezměte prosím "
-"na vědomí, že v takovém případě není možné definovat lokální tiskové fronty "
-"a pokud není uvedený server dostupný, nelze z tohoto počítače tisknout vůbec."
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-"Zadejte název počítače nebo IP adresu serveru CUPS a stiskněte tlačítko OK, "
-"pokud chcete používat tento režim, jinak stiskněte tlačítko \"Ukončit\"."
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "Název nebo IP adresa vzdáleného serveru:"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Nastavuji výchozí tiskárnu..."
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Lokální tiskový systém CUPS nebo vzdálený server CUPS?"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr "Tiskový systém CUPS lze používat dvěma způsoby: "
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr "1. Tiskový systém CUPS může běžet lokálně."
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-"Lze pak použít lokálně připojené tiskárny a vzdálené tiskárny na jiných "
-"serverech CUPS na stejné síti jsou automaticky nalezeny."
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-"Nevýhodou tohoto přístupu je, že je třeba více zdrojů na lokálním počítači. "
-"Je nutné instalovat dodatečné balíčky software, démon CUPS musí běžet na "
-"pozadí a potřebuje paměť a je otevřený port IPP (port 631)."
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-"2. Všechny požadavky na tisk jsou okamžitě odeslány na vzdálený server CUPS."
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-"V tomto případě je spotřeba lokálních zdrojů minimální. Neběží žádný démon "
-"CUPS a není otevřen žádný port, není nainstalován žádný software pro "
-"nastavení lokálních tiskových front, a proto je potřeba méně paměti a místa "
-"na disku."
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-"Nevýhodou tohoto přístupu je, že není možné definovat lokální tiskárny a "
-"pokud není zadaný server dostupný, nelze z tohoto počítače tisknout vůbec."
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr "Jakým způsobem by měl být systém CUPS nastaven na vašem počítači?"
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr "Vzdálený server, zadejte zde název nebo IP adresu:"
-
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr "Lokální tiskový systém CUPS"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Zvolte tiskový systém pro tiskárnu"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Který tiskový systém chcete použít pro tisk?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Nastavení tiskárny \"%s\" selhalo!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instaluji Foomatic ..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "Nelze nainstalovat balíčky %s, %s nelze spustit!"
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Jsou nastaveny následující tiskárny. Dvojitým klepnutím na každou z nich je "
-"možné upravit nastavení, nastavit výchozí tiskárnu nebo získat další "
-"informace."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Zobrazit seznam všech vzdálených CUPS tiskáren"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Obnovit seznam tiskáren (pro získání všech vzdálených CUPS tiskáren)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "Nastavení CUPS"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Změna tiskového systému"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Normální režim"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Expertní režim"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Možnosti tiskárny"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Změnit nastavení tiskárny"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Tiskárna %s%s\n"
-"Co chcete na této tiskárně změnit?"
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "Tato tiskárna je znepřístupněna"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Provést!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Typ připojení pro tiskárnu"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Název tiskárny, popis, umístění"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Výrobce tiskárny, model, ovladač"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Výrobce tiskárny, model"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Nastavit tuto tiskárnu jako výchozí"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "Zpřístupnit tiskárnu"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "Znepřístupnit tiskárnu"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Tisk zkušebních stránek"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Nápověda pro tisk na této tiskárně"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Odebrat tiskárnu"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Odebírám starou tiskárnu \"%s\"..."
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Tiskárna \"%s\" je nyní zpřístupněna."
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Tiskárna \"%s\" je nyní znepřístupněna."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Chcete opravdu odebrat tiskárnu \"%s\"?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Odebírám tiskárnu \"%s\"..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Výchozí tiskárna"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Tiskárna \"%s\" je nyní nastavena jako výchozí."
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Nemůžu přidat oddíl do _naformátovaného_ RAID %s"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Není dostatek oddílů pro RAID úrovně %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "Nelze vytvořit adresář /usr/share/sane/firmware!"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "Nelze vytvořit odkaz /usr/share/sane/%s!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr "Nelze zkopírovat soubor s firmware %s do /usr/share/sane/firmware!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "Nelze nastavit práva na soubor s firmware %s!"
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr "Nelze nainstalovat balíčky potřebné pro sdílené skeneru(ů)."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr "Váš skener(y) nebude přístupný jiným uživatelům než root."
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "Akceptuje/odmítne nekorektní chybové zprávy protokolu IPv4."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr " Akceptuje/odmítne všesměrové icmp echo."
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr " Přijímá/odmítá icmp echo."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Povolí/zakáže automatické přihlášení."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"Pokud je nastaveno \"OBA\", je povolena existence soubor /etc/issue\n"
-"a /etc/issue.net.\n"
-"\n"
-"Pokud je nastaveno \"ŽÁDNÝ\", není povolen žádný soubor issue.\n"
-"\n"
-"Jinak je povolena existence pouze souboru /etc/issue."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "Povolí/zakáže reboot z konzole provedené uživatelem."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Povolí vzdálené přihlášení uživatele root."
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Povolí/zakáže přímé přihlášení uživatele root."
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr "Povolí/zakáže výpis uživatelů ve správcích přihlášení (kdm nebo gdm)."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-"Povolí/zakáže export obrazovky při\n"
-"přechodu z účtu root na jiné uživatele.\n"
-"\n"
-"Více podrobností viz pam_xauth(8)."
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"Povolí/zakáže spojení na X server:\n"
-"\n"
-"- VŠECHNY (všechna spojení jsou povolena),\n"
-"\n"
-" LOKÁLNÍ (je povoleno pouze lokální spojení),\n"
-"\n"
-"- ŽÁDNÉ (není povoleno žádné spojení)."
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"Argument udává, zda je klient oprávněn se připojit k X serveru\n"
-"na tcp port 6000 nebo ne."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"Autorizace:\n"
-"\n"
-"- pokud je nastaveno \"VŠECHNY\", jsou všechny služby kontrolovány  pomocí "
-"tcp_wrapper (více hosts.deny(5)) .\n"
-"\n"
-"- pokud je nastaveno \"LOKÁLNÍ\", autorizuje pouze lokální, \n"
-"\n"
-"- pokud je nastaveno \"ŽÁDNÉ\", neautorizuje žádné.\n"
-"\n"
-"Pokud potřebujete autorizovat službu, použijte soubor /etc/host.allow  (Více "
-"najdete v man hosts.allow(5))."
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"Pokud je SERVER_LEVEL (nebo SECURE_LEVEL chybí) v souboru\n"
-"/etc/security/msec/security.conf větší než 3, vytvoří se symbolický odkaz\n"
-"/etc/security/msec/server na /etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"/etc/security/msec/server je použit programem chkconfig --add pro přidání\n"
-"služby během instalace balíčků."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"Povolí/zakáže příkaz crontab a at pro uživatele.\n"
-"\n"
-"Vyjmenovaní uživatelé se zapíšou do /etc/cron.allow a /etc/at.allow\n"
-"(více man at(1) a crontab(1))."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr "Povolí/zakáže report syslogu zobrazovat na konzoli č. 12"
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"Povolí/zakáže ochranu před spoofingem jmenných služeb. Pokud\n"
-"je nastaveno \"%s\", vypíše report do syslogu."
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Bezpečnostní varování:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "Povolí/zakáže ochranu před IP spoofingem."
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "Povolí/zakáže použití knihovny libsafe, pokud je na systému nalezena."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "Povolí/zakáže zaznamenávání podivných IPv4 paketů."
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Povolí/zakáže bezpečnostní kontrolu pravidelně každou hodinu."
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Povoluje su pouze členům skupiny wheel nebo povoluje su každému uživateli."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "Použije heslo pro autentizaci uživatelů."
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Povolí/zakáže kontrolu na nastavení promiskuitního režimu síťového rozhraní."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr " Povolí/zakáže provádění denních bezpečnostních kontrol."
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr " Povolí/zakáže sulogin(8) v jednouživatelském režimu."
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Přidá jméno k výjimkám, které se nekontrolují na dobu platnosti pomocí msec."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr "Nastaví dobu platnosti hesla na \"max\" dnů a prodlevu mezi změnami."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr "Nastavuje délku historie pro použitá hesla."
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Nastaví minimální délku hesla, minimální počet číslic a velkých písmen v "
-"hesle."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Nastavuje umask pro uživatele root."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "pokud je nastaveno, provádí se kontrola na otevřené porty."
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"pokud je nastaveno, kontroluje se:\n"
-"\n"
-" - zda není heslo prázdné,\n"
-"\n"
-"- zda v /etc/shadow nějaké heslo je\n"
-"\n"
-"- zda existují uživatelé, kteří mají id 0 kromě uživatele root."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"pokud je nastaveno, kontrolu práva souborů v domovském adresáři uživatele"
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"pokud je nastaveno, kontroluje, zda je síťové rozhraní v promiskuitním režimu"
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "pokud je nastaveno, spouští každý den bezpečnostní kontrolu."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "pokud je nastaveno, provádí se kontrola přidané/odebrané sgid soubory."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "pokud je nastaveno, kontroluje prázdná hesla v /etc/shadow."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "pokud je nastaveno, ověřuje kontrolní součet pro suid/sgid soubory."
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"pokud je nastaveno, kontroluje přidávání/odebírání souborů se suid root."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "pokud je nastaveno, vypisuje soubory bez vlastníka."
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"pokud je nastaveno, kontroluje, které soubory/adresáře jsou zapisovatelné "
-"pro všechny."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "pokud je nastaveno, provádí kontrolu na chkrootkit."
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"pokud je nastaveno, odesílá report na daný email nebo přímo uživateli root"
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "pokud je nastaveno, odesílá výsledek kontroly mailem."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "Neposílat mail, pokud není nic, před čím je nutné varovat"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "pokud je nastaveno, spouští kontrolu rpm databáze."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "pokud je nastaveno, posílá výstup kontroly do syslogu."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "pokud je nastaveno, posílá výsledek kontroly na tty."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr "Nastaví velikost historie pro příkazy. Hodnota -1 znamená neomezená."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "Nastaví čas vypršení pro shell. Nulová hodnota znamená žádný čas."
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "Čas pro vypršení je v sekundách"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Nastaví uživatelskou masku."
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Akceptovat nekorektní chybové zprávy protokolu IPv4"
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Akceptovat všesměrové icmp echo"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "Přijímat icmp echo"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "soubor /etc/issue* existuje"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "Restart systému provedený uživatelem z konzole"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Povolit vzdálené přihlášení uživatele root"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "Přímé přihlášení uživatele root"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr "Povolit výpis uživatelů ve správcích přihlášení (kdm nebo gdm)"
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr "Export obrazovky při přechodu z účtu root na jiné uživatele"
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "Povolit připojení na X Window"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "Autorizovat TCP spojení do X Window"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "Kontrolovat přístup všech služeb pomocí tcp_wrapperu"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Kontrolovat pravidla pro msec"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "Povolit příkazy \"crontab\" a \"at\" pro uživatele"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "Report syslogu zobrazovat na konzole č. 12"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "Ochrana před zahlcením dotazy na doménová jména"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "Povolit ochranu před IP spoofingem"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "Povolit použití knihovny libsafe, pokud je na systému nalezena"
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "Povolit zaznamenávání podivných IPv4 paketů"
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr " Povolí/zakáže bezpečnostní kontrolu pravidelně každou hodinu."
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr "Povolit su pouze členům skupiny wheel nebo všem uživatelům"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "Použije heslo pro autentizaci uživatelů"
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr ""
-"Povolí/zakáže kontrolu na nastavení promiskuitního režimu síťového rozhraní."
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "Denní bezpečnostní kontrola"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "Povolí/zakáže sulogin(8) v jednouživatelském režimu."
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Bez hesla pro"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr "Nastavit expiraci hesla a prodlevu před deaktivací uživatelského účtu"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Délka historie hesel"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "Minimální délka hesla a počet číslic a velkých písmen"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "Hodnota umask pro uživatele root"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Velikost historie pro shell"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Čas vypršení pro shell"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "Umask pro uživatele"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Kontrolovat otevřené porty"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "Kontrola na nezabezpečené účty"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "Kontrolovat práva souborů v domovském adresáři uživatele"
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "Kontrolovat, zda je síťové rozhraní v promiskuitním režimu"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Spustit každý den bezpečnostní kontrolu"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "Kontrola přidaných/odebraných sgid souborů."
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "Kontrolovat prázdná hesla v /etc/shadow"
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "Ověřovat kontrolní součet pro suid/sgid soubory"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "Kontrolovat přidávání/odebírání souborů se suid root"
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "Vypsat soubory bez vlastníka."
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Kontrolovat, které soubory/adresáře jsou zapisovatelné pro všechny"
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "Provést kontrolu pomocí chkrootkit"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "Pokud to není nutné, maily neodesílat"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"Pokud je nastaveno, odesílá report na daný email nebo přímo uživateli root"
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "Odeslat výsledek kontroly mailem"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "Spustit kontrolu rpm databáze"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Poslat výstup kontroly do syslogu"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Poslat výsledek kontroly na tty"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Dveře dokořán"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Slabá"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Vyšší"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Vysoká"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoidní"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Tato úroveň musí být použita s rozmyslem. Sice můžete snadněji používat "
-"svůj\n"
-"systém, ale na druhou stranu je velmi citlivý: Nesmí být použit pro\n"
-"počítač připojený k Internetu. Pro přihlášení není zapotřebí žádné heslo."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Hesla jsou nyní aktivní, ale stále nedoporučuji použít tento počítač na síti."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Toto je standardní úroveň zabezpečení pro počítač, který je používán jako "
-"klient pro připojení k internetu."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Existují zde některá omezení a každou noc jsou spuštěny automatické testy."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"S touto bezpečnostní úrovní je možné používat systém jako server.\n"
-"Bezpečnost je nyní dostatečně vysoká, aby bylo možné používat systém jako "
-"server, ke kterému\n"
-"je možné připojit mnoho klientů. Poznámka: pokud je počítač používán pouze "
-"jako klient pro připojení k Internetu, je lepší zvolit nižší úroveň."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Tato úroveň má vlastnosti předchozí úrovně, ale systém je úplně uzavřen.\n"
-"Zabezpečení je nastaveno na maximum."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Základní volby programu DrakSec"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Vyberte prosím požadovanou úroveň zabezpečení"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Úroveň zabezpečení"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Použít libsafe pro servery"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Knihovna, které zabraňuje útokům proti přetečení bufferu nebo proti špatnému "
-"formátování řetězců."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Administrátor bezpečnosti (přihlašovací jméno nebo email)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Spustit zvukový systém ALSA (Advanced Linux Sound Architecture)"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron - spouští opakující se akce"
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd je používán pro sledování stavu baterie a zaznamenávání přes syslog.\n"
-"Může také být použit pro vypnutí počítače při vybité baterii."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Spouští příkazy naplánované příkazem na určitý čas příkazem 'at'.\n"
-"Také spouští příkazy při nízkém vytížení systému."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron je standardní Unixový program který spouští uživatelem zadané programy\n"
-"v předem definovaných intervalech. vixie cron má navíc mnoho vlastností,\n"
-"včetně vyšší bezpečnosti a více možností nastavení."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"FAM je démon pro sledování souborů. Používá se ke zjištění, zda byl soubor "
-"změněn.\n"
-"Používá jej prostředí GNOME a KDE"
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM přidává do textových programů podporu myši (např pro Midnight "
-"Commander).\n"
-"Může také v konzoli provádět operace 'vyjmi' a 'vlož' a ovládat pop-up menu."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake testuje hardware a umožňuje nový/změněný\n"
-"hardware nastavit"
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache je WWW server. Je používán k poskytování HTML a CGI souborů."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internetový superserver démon (nazývaný inetd) spouští mnoho ostatních\n"
-"internetových služeb, tak jak jsou zapotřebí. Odpovídá za start např.\n"
-"telnetu, ftp, rsh a rlogin. Pokud vypnete inetd, vypnete tím i ostatní\n"
-"služby které spouští."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Spustit paketový filtr pro jádra řady 2.2, který chrání počítač\n"
-"proti útokům ze sítě."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Tento balíček nahraje zvolenou mapu klávesnice definovanou\n"
-"v /etc/sysconfig/keyboard. Tu lze vybrat pomocí nástroje kbdconfig.\n"
-"Pro většinu počítačů byste ji měli nechat zapnutou."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatická generace hlavičky jádra v adresáři /boot\n"
-"pro soubory /usr/include/linux/{autoconf,version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Automatická detekce a konfigurace hardware při spuštění."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"LinuxConf provádí různé úkoly při spuštění systému\n"
-"nutné pro správu systémové konfigurace."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd je tiskový démon, bez kterého nebude fungovat lpr (program pro tisk).\n"
-"Je to server, který posílá tištěné dokumenty jednotlivým tiskárnám."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server používaný pro sestavení vysoce výkonného\n"
-"a dostupného serveru."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) je doménový (DNS) server, který překládá hostitelská jména na "
-"IP adresy."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Připojuje a odpojuje všechny síťové (NFS), SMB (Lan/Windows) a Netware "
-"(NCP)\n"
-"přípojné body (mount points)."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktivuje či deaktivuje všechna síťová rozhraní, která se mají nastavit při\n"
-"startu systému."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS je oblíbený protokol pro sdílení souborů přes sítě TCP/IP.\n"
-"Tato služba poskytuje NFS server, jehož nastavení je v /etc/exports."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS je oblíbený protokol pro sdílení souborů přes sítě TCP/IP.\n"
-"Tato služba poskytuje možnost uzamykání souborů na NFS."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Automaticky nastaví podporu numerické klávesnice v konzoli\n"
-"a v Xorg při startu."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Podpora pro OKI 4w a kompatibilní wintiskárny."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"Podpora PCMCIA většinou znamená podporu zařízení jako síťové karty a\n"
-"modemy v laptopech. Nespustí se pokud ji přímo nenastavíte, ale není "
-"problém\n"
-"jí mít nainstalovanou i na počítačích, které ji nepotřebují."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper spravuje RPC spojení, která jsou používána protokoly jako NFS\n"
-"a NIS. Portmap server musí být spuštěn na počítačích, které fungují jako\n"
-"servery pro protokoly, které používají mechanismus RPC."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr "Postfix je program pro doručování pošty z jednoho počítače na jiný."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Ukládá a obnovuje 'stav entropie' na počítači, což je používáno pro\n"
-"kvalitnější generaci náhodných čísel."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Přiřazuje přímá zařízení blokovým (například diskové oddíly)\n"
-"pro aplikace jako je Oracle nebo DVD přehrávač"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Démon routed umožňuje automaticky obnovovat směrovací tabulku (router "
-"table)\n"
-"pro IP adresy. K tomu používá protokol RIP. Zatímco RIP je běžně používán\n"
-"v malých sítích, pro složitější sítě je zapotřebí složitější protokoly."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Protokol rstat umožňuje uživatelům sítě sledovat vytížení jednotlivých\n"
-"strojů připojených k síti."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Protokol rusers umožňuje uživatelům sítě zjistit kdo je přihlášen na\n"
-"jiném počítači."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"Protokol rwho umožňuje vzdáleným uživatelům získat seznam\n"
-"všech uživatelů přihlášených na počítači s démonem rwho (je to podobné\n"
-"službě finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Spustit zvukový systém při startu"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog je program pomocí něhož zaznamenává mnoho démonů správy do "
-"systémových\n"
-"log souborů. Je dobré mít spuštěný syslog."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Nahrát ovladače pro usb zařízení."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "Startuje X Font Server (to je nezbytné pro běh Xorg)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Zvolte si, které služby by měly být automaticky spuštěny při startu"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Tisk"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Internet"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Sdílení souborů"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Vzdálená administrace"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Databázové servery"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "spuštěno"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "zastaveno"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Služby a démoni"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Nejsou žádné další\n"
-"informace o službě, promiňte."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Informace"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "Spustit na žádost"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "Při spuštění"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Start"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Stop"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Co je to Mandriva Linux?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Vítá vás <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-"Mandriva Linux ke <b>distribuce Linuxu</b>, která se skládá z jádra systému, "
-"tzv. <b>operačního systému</b> (založeného na jádře zvaném Linux), a "
-"<b>spousty aplikací</b>, které uspokojí každou potřebu, na kterou si jenom "
-"vzpomenete."
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"Mandriva Linux je <b>uživatelsky nejpřívětivější</b> distribuce Linuxu "
-"dostupná na trhu. Je také jednou z <b>nejpoužívanějších</b> distribucí "
-"Linuxu na světě!"
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Open Source</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Vítejte do <b>světa Open Source</b>!"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"Mandriva Linux využívá a je plně oddán modelu Open Source. To znamená, že "
-"toto nové vydání je výsledkem <b>spolupráce</b> mezi týmem <b>vývojářů "
-"společnosti Mandriva</b> a <b>celosvětovou komunitou</b> přispěvatelů do "
-"distribuce Mandriva Linux."
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-"Rádi bychom <b>poděkovali</b> každému, kdo se zúčastnil vývoje tohoto "
-"posledního vydání."
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>GPL</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-"Většina ze software v této distribuci a všechny nástroje distribuce Mandriva "
-"Linux jsou dostupné pod Obecnou veřejnou licencí (<b>General Public License</"
-"b>)."
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-"Licence GPL je srdcem modelu open source; zajišťuje každému <b>svobodu</b> "
-"používat, studovat, šířit a vylepšovat software, jak uzná za vhodné, pokud "
-"sdílí výsledky své práce s ostatními."
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-"Hlavní výhodou tak je, že počet vývojářů je relativně <b>neomezený</b>, což "
-"má za následek <b>velmi vysokou kvalitu</b> software."
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>Připojte se ke komunitě</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-"Distribuce Mandriva Linux má jednu z <b>největších komunit</b> uživatelů a "
-"vývojářů. Role takové komunity jsou velmi rozmanité, od hlášení chyb po "
-"vývoj nových aplikací. Komunita hraje <b>klíčovou roli</b> ve světě "
-"distribuce Mandriva Linux."
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-"Chcete-li se <b>dozvědět více</b> o naší dynamické komunitě, navštivte "
-"prosím stránky <b>www.mandrivalinux.com</b> nebo přímo <b>www.mandrivalinux."
-"com/en/cookerdevel.php3</b>, pokud máte zájem přímo se <b>účastnit</b> "
-"vývoje."
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr "<b>Download verze</b>"
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-"Právě instalujete <b>Mandriva Linux Download</b>. Jedná se o volnou verzi, "
-"kterou chce společnost Mandriva <b>poskytnout každému</b>."
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-"Download verze (volně stažitelná) <b>nemůže obsahovat</b> všechen software, "
-"který není otevřený (open source). Takový software v této volně stažitelné "
-"verzi nenajdete."
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-"\t* <b>Proprietární ovladače</b> (jako ovladače pro NVIDIA®, ATI™, atd.)."
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-"\t* <b>Proprietární software</b> (jako Acrobat® Reader®, RealPlayer®, "
-"Flash™, atd.)."
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-"Nebudete mít také přístup ke <b>službám dostupným</b> v jiných produktech "
-"společnosti Mandriva."
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr "<b>Discovery, váš první Linuxový desktop</b>"
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr "Právě instalujete produkt <b>Mandriva Linux Discovery</b>."
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery je <b>nejjednodušší</b> a uživatelsky <b>nejpřívětivější</b> "
-"distribuce Linuxu. Zahrnuje v sobě zvlášť vybraný <b>nejlepší software</b> "
-"pro kancelářské aplikace, multimédia a Internet. Její menu je orientované na "
-"činnosti, kde pro každou činnost je zvolena jediná aplikace."
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr "<b>PowerPack, nejpokročilejší Linuxový desktop</b>"
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr "Právě instalujete produkt <b>Mandriva Linux PowerPack</b>."
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-"PowerPack je nejlepší <b>Linuxový produkt pro desktop</b> společnosti "
-"Mandriva. Zahrnuje v době <b>tisíce aplikací</b> - všechny od těch "
-"nejpopulárnějších po ty nejvíce technicky zaměřené."
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr "<b>PowerPack+, Linuxové řešení pro desktopy a servery</b>"
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr "Právě instalujete produkt <b>Mandriva Linux PowerPack+</b>."
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-"PowerPack+ je <b>plně funkční řešení založené na Linuxu</b> určené pro malé "
-"a střední <b>sítě</b>. Powerpack+ obsahuje tisíce <b>aplikací pro desktop</"
-"b> a přidává srozumitelný výběr <b>serverových aplikací</b> na světové "
-"úrovni."
-
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Produkty společnosti Mandriva</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-"Společnost <b>Mandriva</b> vyvinula širokou řadu produktů <b>Mandriva Linux</"
-"b>."
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Produkty Mandriva Linux jsou:"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr "\t* <b>Discovery</b>, váš první Linuxový desktop."
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr "\t* <b>PowerPack</b>, nejpokročilejší Linuxový desktop."
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr "\t* <b>PowerPack+</b>, Linuxové řešení pro desktop i servery."
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-"\t* <b>Mandriva Linux pro x86-64</b>, řešení Mandriva Linux pro co nejlepší "
-"využití vašeho 64bitového procesoru."
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr "<b>Produkty společnosti Mandriva (produkty Nomad)</b>"
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-"Společnost Mandriva vyvinula dva produkty, které vám umožní používat "
-"distribuci Mandriva Linux <b>na každém počítači</b> a bez potřeby tuto "
-"distribuci na nich instalovat:"
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-"\t* <b>Move</b>, distribuce Mandriva Linux, která se výhradně spouští ze "
-"spustitelného CD-ROM disku."
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-"\t* <b>GlobeTrotter</b>, distribuce Mandriva Linux předinstalovaná na ultra "
-"kompaktních mobilních discích “LaCie Mobile Hard Drive”."
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "<b>Produkty společnosti Mandriva (profesionální řešení)</b>"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-"Níže uvedené jsou produkty společnosti Mandriva určené pro <b>profesionální "
-"potřeby</b>:"
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr "\t* <b>Corporate Desktop</b>, desktop Mandriva Linux pro společnosti."
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr "\t* <b>Corporate Server</b>, serverové řešení Mandriva Linux."
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr "\t* <b>Multi-Network Firewall</b>, bezpečnostní řešení Mandriva Linux."
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>Vybráno KDE</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-"Váš produkt Discovery vás uvede do prostředí <b>KDE</b>, rozvinutého a "
-"uživatelsky velmi přívětivého <b>grafického uživatelského prostředí</b>."
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-"Prostředí KDE vám vaše <b>první kroky</b> s Linuxem natolik <b>zjednoduší</"
-"b>, že už nikdy nepomyslíte na jiný operační systém!"
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-"Prostředí KDE také obsahuje mnoho <b>dobře integrovaných aplikací</b>, jako "
-"například webový prohlížeč Konqueror a správce osobních údajů Kontact."
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Vyberte si své oblíbené grafické prostředí</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"S produktem PowerPack si můžete vybrat <b>grafické uživatelské prostředí</"
-"b>. Společnost Mandriva vybrala jako výchozí prostředí <b>KDE</b>."
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-"Prostředí KDE je <b>plně rozvinuté</b> a uživatelsky <b>velmi přívětivé</b> "
-"grafické uživatelské prostředí. Obsahuje mnoho integrovaných aplikací."
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-"Doporučujeme vám však vyzkoušet všechna dostupná prostředí (včetně <b>GNOME</"
-"b>, <b>IceWM</b>, apod.) a vybrat si to, co vám nejvíc vyhovuje."
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"S produktem PowerPack+ si můžete vybrat <b>grafické uživatelské prostředí</"
-"b>. Společnost Mandriva vybrala jako výchozí prostředí <b>KDE</b>."
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "<b>OpenOffice.org</b>"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr "S produktem Discovery objevíte <b>OpenOffice.org</b>."
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-"Jedná se o <b>plně rozvinutý kancelářský balík</b> obsahující textový "
-"procesor, tabulkový kalkulátor a programy pro kreslení a tvorbu prezentací."
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-"OpenOffice.org umí číst a zapisovat většinu typů dokumentů z kancelářského "
-"balíku <b>Microsoft® Office</b> včetně souborů aplikací Microsoft Word, "
-"Excel a PowerPoint®."
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-"Produkt Discovery v sobě zahrnuje groupwarové řešení <b>Kontact</b> pro "
-"prostředí KDE."
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"Více než jen <b>emailový klient</b> se spoustou funkcí. Kontact v sobě také "
-"zahrnuje <b>adresář</b>, <b>kalendář</b> plus nástroj pro vytváření "
-"<b>poznámek</b>!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-"Je to ten nejjednodušší způsob, jak komunikovat s vašimi kontakty a "
-"organizovat váš čas."
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Surfovat na Internetu</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr "Produkt Discovery vám zpřístupní <b>všechny zdroje na Internetu</b>:"
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr ""
-"\t* Prohlížejte <b>webové stránky</b> pomocí aplikace <b>Konqueror</b>."
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-"\t* <b>Povídejte si</b> online s vašimi přáteli pomocí aplikace Kopete."
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "\t* <b>Přenášejte</b> soubory pomocí aplikace KBear."
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr "<b>Užívejte si našich multimediálních vlastností</b>"
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr "Produkt Discovery vám také velmi usnadní používání <b>multimédií</b>:"
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr "\t* Sledujte vaše oblíbená <b>videa</b> pomocí aplikace Kaffeine."
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr "\t* Poslouchejte vaše <b>soubory s hudbou</b> pomocí aplikace amaroK."
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* Upravujte a vytvářejte <b>obrázky</b> pomocí aplikace GIMP."
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr "<b>Užívejte širokou řadu aplikací</b>"
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"V menu Mandriva Linux najdete <b>jednoduše použitelné</b> aplikace pro "
-"<b>všechny typy úloh</b>:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr "\t* Vytváření, úpravu a sdílení dokumentů pomocí <b>OpenOffice.org</b>"
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* Organizujte vaše osobní data pomocí integrovaných aplikací <b>Kontact</"
-"b> a <b>Evolution</b>."
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-"\t* Prohlížení webových stránek pomocí aplikací <b>Mozilla</b> a "
-"<b>Konqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* Na online chat můžete použít <b>Kopete</b>"
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* Poslouchejte vaše <b>hudební CD a soubory</b> a sledujte <b>video</b>."
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* Upravovat obrázky a fotografie pomocí aplikace <b>The Gimp</b>"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Vývojové prostředí</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-"Produkt PowerPack vám poskytuje ty nejlepší nástroje pro <b>vývoj</b> vašich "
-"vlastních aplikací."
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-"Vychutnáte si mocné a integrované vývojové prostředí pro KDE <b>KDevelop</"
-"b>, které vám umožní programovat v mnoha jazycích."
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-"Produkt PowerPack rovněž obsahuje <b>GCC</b>, nejlepší GNU kompilátor a "
-"<b>GDB</b>, přidružený ladící nástroj (debugger)."
-
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>Vývojové editory</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-"Produkt PowerPack vám umožní vybrat si mezi <b>populárními editory</b>:"
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: plně přizpůsobitelný editor textu pro mnoho režimů"
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-"\t* <b>XEmacs</b>: další open source textový editor a systém pro vývoj "
-"aplikací"
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-"\t* <b>Vim</b>: pokročilý textový editor s více funkcemi než ve standardním "
-"Vi"
-
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>Programovací jazyky</b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-"Se všemi těmi <b>mocnými nástroji</b> budete moci psát aplikace v <b>mnoha "
-"programovacích jazycích</b>:"
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr "\t* Známý <b>jazyk C</b>."
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr "\t* Objektově orientované jazyky:"
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr "\t* Skriptovací jazyky:"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr "\t* A mnoho dalších."
-
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>Vývojové nástroje</b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-"S mocným integrovaným vývojovým prostředím <b>KDevelop</b> a vedoucím "
-"kompilátorem <b>GCC</b> pro Linux budete moci vytvářet aplikace v <b>mnoha "
-"různých jazycích</b> (C, C++, Java™, Perl, Python, atd.)."
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Servery pro groupware</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-"Produkt PowerPack+ vám zpřístupní plně rozvinutý server pro groupware "
-"<b>Kolab</b>, který vám díky klientům jako <b>Kolab</b> umožní:"
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* Odesílat a příjímat vaši <b>elektronickou poštu</b>."
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr "\t* Sdílet vaši <b>agendu</b> a vaše <b>adresáře</b>."
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr "\t* Spravovat vaše <b>poznámky</b> a <b>seznamy úkolů</b>."
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Servery</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-"Dodejte sílu a nové vlastnosti vaší <b>podnikové síti</b> s vedoucími "
-"řešeními včetně serverů:"
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-"\t* <b>Samba</b>: Služba sdílení souborů a tiskáren pro klienty systému MS "
-"Windows"
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: Nejpoužívanější webový server"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-"\t* <b>MySQL</b> a <b>PostgreSQL</b>: Nejpopulárnější open source databáze "
-"na světě."
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: Concurrent Versions System, systém pro správu verzí, "
-"nejrozšířenější a síťově transparentní open source řešení"
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-"\t* <b>ProFTPD</b>: Vysoce nastavitelný software pro FTP server pod licencí "
-"GPL"
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr "\t* <b>Postfix</b> a <b>Sendmail</b>: Známé a mocné poštovní servery."
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Ovládací centrum Mandriva Linux</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"<b>Ovládací centrum Mandriva Linux</b> je nepostradatelná sbírka nástrojů "
-"specifických pro distribuci Mandriva Linux, které zjednoduší nastavení "
-"vašeho počítače."
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-"Tuto sbírku <b>více než 60</b> užitečných nástrojů rychle oceníte, když "
-"budete potřebovat <b>jednoduše nastavit váš systém</b>: hardware, přípojné "
-"body, síť a Internet, úroveň zabezpečení vašeho počítače, atd."
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>Model Open source</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-"Jako každé jiné počítačové programování, vývoj open source software <b>si "
-"žádá čas a lidi</b>. Aby respektovala filozofii open source, prodává "
-"společnost Mandriva produkty s přidanou hodnotou a služby, díky kterým "
-"<b>vylepšuje distribuci Mandriva Linux</b>. Chcete-li <b>podporovat "
-"filozofii open source</b> a vývoj distribuce Mandriva Linux, <b>zvažte "
-"prosím</b> koupi některého z našich produktů a služeb!"
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>Online obchod</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"Všechny produkty a služby společnosti Mandriva najdete na naší <b>platformě "
-"pro e-komerci</b>."
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-"Můžete zde nalézt všechny naše produkty, služby a produkty třetích stran."
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-"Tato platforma byla právě <b>předělána</b> tak, aby se zlepšila její "
-"efektivita a použitelnost."
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "Navštivte ještě dnes <b>store.mandriva.com</b>"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-"<b>Mandriva Club</b> je <b>perfektní doplněk</b> k vašemu produktu Mandriva "
-"Linux."
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-"Využijte <b>cenných výhod</b>, které jsou spojeny s členstvím v klubu "
-"Mandriva Club, jako například:"
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-"\t* <b>Speciální slevy</b> na produkty a služby nabízené v online obchodu "
-"<b>store.mandriva.com</b>."
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-"\t* Přístup ke <b>komerčním aplikacím</b> (například ovladačům NVIDIA® nebo "
-"ATI™)."
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* Účast v <b>uživatelských fórech</b> distribuce Mandriva Linux."
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-"\t* <b>Dřívější a privilegovaný přístup</b>, před veřejným vydáním, k <b>ISO "
-"obrazům</b> Mandriva Linux."
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-"<b>Mandriva Online</b> je nová prvotřídní služba, kterou společnost Mandriva "
-"hrdě nabízí svým zákazníkům!"
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-"Mandriva Online poskytuje širokou řadu cenných služeb pro <b>snadnou "
-"aktualizaci</b> vašich systémů s distribucí Mandriva Linux:"
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-"\t* <b>Perfektní</b> zabezpečení systému (automatizované aktualizace "
-"software)."
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-"\t* <b>Upozornění</b> na aktualizace (elektronickou poštou nebo pomocí "
-"apletu na ploše)."
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr "\t* Flexibilní <b>plánované</b> aktualizace."
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-"\t* Správa <b>všech vašich Mandriva Linux systémů</b> pomocí jednoho účtu."
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-"Potřebujete <b>asistenci</b>? Setkejte se s technickými experty společnosti "
-"Mandriva na naší <b>platformě technické podpory</b> na stránkách www."
-"mandrivaexpert.com."
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-"Díky pomoci <b>kvalifikovaných expertů společnosti Mandriva</b> ušetříte "
-"spoustu času."
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-"Pro zodpovězení otázek spojených s distribucí Mandriva Linux máte možnost "
-"zakoupit si incidenty technické podpory na <b>store.mandriva.com</b>."
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Kancelářská stanice"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Programy pro kancelář: textové procesory (OpenOffice.org Writer, Kword), "
-"tabulkové procesory (OpenOffice.org Calc, Kspread), prohlížeče PDF a další"
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Programy pro kancelář: textové procesory (KWord, Abiword), tabulkové "
-"procesory (KSpread, Gnumeric), prohlížeče PDF a další"
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Hry"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Zábavné programy: deskové hry, strategie, atd."
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Multimediální stanice"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Programy pro přehrávání/editaci zvuku a videa"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Internetová stanice"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Soubor nástrojů pro čtení a posílaní el. pošty a příspěvků do diskusních "
-"skupin (mutt, tin..) a pro prohlížení Webu"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Síťový počítač (klient)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Klienti pro různé verze protokolu ssh"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Nastavení"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Nástroje pro snadnou konfiguraci počítače"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Konzolové nástroje"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editory, shelly, souborové nástroje, terminály"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Knihovny pro vývoj v C a C++, programy a hlavičkové soubory"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Dokumentace"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Knihy a Howto o Linuxu a Svobodném Software"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Standardní Báze Linuxu (LSB): Podpora aplikací jiných dodavatelů"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "Groupware"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Server Kolab"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Firewall/Router"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Internetová brána"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "Pošta/Diskusní skupiny"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Poštovní server Postfix, server diskusních skupin Inn"
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "Server adresářových služeb"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "Server FTP"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Server pro domény a síťové informace"
-
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Server pro sdílení souborů a tiskáren"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "Server NFS, server Samba"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Databáze"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "Databázové servery PostgreSQL a MySQL"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache a Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Pošta"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Poštovní server Postfix"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "Databázové servery PostgreSQL nebo MySQL"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Síťový server"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS server, SMB server, Proxy server, SSH server"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "Pracovní stanice s KDE"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop Environment, základní grafické prostředí s kolekcí doprovodných "
-"nástrojů"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Pracovní stanice s GNOME"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Grafické prostředí s uživatelsky přívětivým seskupením aplikací a pracovní "
-"plochou"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Další grafické desktopy"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "IceWM, Window Maker, Enlightenment, Fvwm a další"
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Užitečné nástroje"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "Server SSH"
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "Webmin"
-
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Server pro vzdálené nastavení Webminu"
-
-#: share/compssUsers.pl:191
-#, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Síťové nástroje/Sledování"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr "Nástroje pro sledování, evidenci procesů, tcpdump, nmap, ..."
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "Průvodci Mandriva"
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "Průvodci nastavením serverů"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"Tento program je svobodný software; můžete ho šířit a/nebo modifikovat\n"
-"podle specifikace GNU General Public Licence, která byla publikována\n"
-"Free Software Foundation; buď verze 2, nebo (podle volby) pozdější verze.\n"
-"\n"
-"Tento program je distribuován s nadějí, že bude užitečný,\n"
-"ale BEZ JAKÝCHKOLIV ZÁRUK; BEZ NÁROKU NA PROFIT. Více detailů naleznete\n"
-"v licenci GNU General Public Licence.\n"
-"\n"
-"Kopii GNU General Public Licence můžete obdržet buď s tímto programem\n"
-"nebo si o ní můžete napsat na adresu Free Software Foundation, Inc.,\n"
-"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Záloha a obnova aplikace\n"
-"\n"
-"--default             : uloží výchozí adresáře.\n"
-"--debug               : zobrazí všechny ladící hlášky.\n"
-"--show-conf           : vypíše seznam souborů a adresářů pro zálohu.\n"
-"--config-info         : vysvětlí volby pro konfigurační soubory (pro non-X "
-"uživatele).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : zobrazí tuto zprávu.\n"
-"--version             : zobrazí číslo verze.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"VOLBY:\n"
-"  --boot            - povolí nastavení zavaděče systému\n"
-"  --splash          - povolí nastavení vzhledu pro zavaděč systému\n"
-"výchozí režim: nabídne nastavení vlastností pro automatické přihlášení"
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[VOLBY] [NAZEV_PROGRAMU]\n"
-"\n"
-"[VOLBY]:\n"
-"  --help            - vypíše tuto nápovědu.\n"
-"  --report          - program může být libovolný Mandriva Linux nástroj\n"
-"  --incident        - program může být libovolný Mandriva Linux nástroj"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-"[--add]\n"
-"  --add             - průvodce \"přidáním síťového rozhraní\"\n"
-"  --del             - proůvodce \"odebráním síťového rozhraní\"\n"
-"  --skip-wizard     - vlastní zpráva připojení\n"
-"  --internet        - nastaví internet\n"
-"  --wizard          - stejné jako volba --add"
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"Import fontů a monitoring aplikací\n"
-"\n"
-"[VOLBY]:\n"
-"--windows_import : provede import ze všech dostupných oddílů s Windows.\n"
-"--xls_fonts      : zobrazí všechny fonty, které již z xls existují\n"
-"--install        : akceptuje libovolný font z libovolného adresáře.\n"
-"--uninstall      : odinstaluje libovolný font nebo libovolný adresář s "
-"fonty.\n"
-"--replace        : nahradí již existující fonty\n"
-"--application    : 0 žádná aplikace.\n"
-"                 : 1 všechny dostupné podporované aplikace.\n"
-"                 : nazev_aplikace jako např. so pro staroffice \n"
-"                 : a gs pro ghostscript."
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[VOLBY]\n"
-"Nastavení pro Mandriva Linux Terminal Server (MTS)\n"
-"--enable         : povolí MTS\n"
-"--disable        : zakáže MTS\n"
-"--start          : spustí MTS\n"
-"--stop           : ukončí MTS\n"
-"--adduser        : přidá existujícího uživatele do MTS (vyžaduje jméno "
-"uživatele)\n"
-"--deluser        : odebere existujícího uživatele z MTS (vyžaduje jméno "
-"uživatele)\n"
-"--addclient      : přidá klienta do MTS (vyžaduje MAC adresu, IP, název nbi "
-"obrazu)\n"
-"--delclient      : odebere klienta z MTS (vyžaduje MAC address, IP, název "
-"nbi obrazu)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[klávesnice]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[VOLBY]\n"
-"Síť a připojení k Internetu a sledování aplikací\n"
-"\n"
-"--defaultintf interface: zobrazí vždy toto rozhraní\n"
-"--connect : pokud není připojeno, provede připojení k internetu\n"
-"--disconnect : pokud je připojeno, provede odpojení od internetu\n"
-"--force : používá se s (při)odpojením : vynutí (při)odpojení.\n"
-"--status : vrátí 1 pokud je připojeno, jinak vrací 0 a skončí.\n"
-"--quiet : tichý režim. Používá se při (při)odpojování."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[VOLBY]...\n"
-"  -no-confirmation      nepotvrzuje první otázku v režimu Mandriva Update\n"
-"  --no-verify-rpm       neprovádí ověření podpisu u balíčků\n"
-"  --changelog-first      v okně s popisem nejdříve zobrazí changelog před "
-"seznamem souborů\n"
-"  --merge-all-rpmnew    navrhne spojit všechny nalezené soubory .rpmnew/."
-"rpmsave"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [všechno]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Použití: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Aby se změny projevily, je nutné restartovat počítač"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Prosím odhlaste se a pak stiskněte Ctrl-Alt-Backspace"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr "Aby se změna projevila, je nutné se odhlásit a opět přihlásit"
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "Nepoužitelné bez Terminál serveru"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s vyžaduje jméno uživatele...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s vyžaduje název počítače, MAC adresu, IP, nbi-image, 0/1 pro "
-"THIN_CLIENT, 0/1 pro lokální konfiguraci...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: %s vyžaduje název počítače...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Nastavení terminálového serveru"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Povolit server"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Vypnout server"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Spustit server"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Zastavit server"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Disketa Etherboot/ISO"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Startovací obraz ze sítě"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Přidat/Odebrat uživatele"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Přidat/Odebrat klienty"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Obrazy"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr "Klienti/Uživatelé"
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "Průvodce pro nové uživatele"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr "%s definováno jako dm, přidávám uživatele gdm do /etc/passwd$$CLIENT$$"
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-"\n"
-" Tato funkce průvodce provede následující:\n"
-" \t1) Nechá vás zvolit tenkého nebo tlustého klienta.\n"
-"\t2) Nastaví DHCP.\n"
-"\t\n"
-"Po provedení těchto kroků tento průvodce:\n"
-"\t\n"
-"    a) Vytvoří všechny obrazy nbi.\n"
-"    b) Aktivuje server.\n"
-"    c) Spustí server.\n"
-"    d) Sesynchronizuje soubory shadow, takže jsou všichni uživatelé včetně "
-"roota\n"
-"       přidáni do souboru shadow$$CLIENT$$.\n"
-"    e) Zeptá se, zda-li chcete vytvořit zaváděcí disketu.\n"
-"    f) Pokud se jedná o tenké klienty, zeptá se, zda-li chcete restartovat "
-"KDM.\n"
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Zrušit průvodce"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr "Uložte prosím nastavení dhcpd!"
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr "Používat tenké klienty."
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr "Synchronizovat nastavení klávesnice X klienta se serverem."
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"Vyberte prosím výchozí typ klienta.\n"
-"    Tenký klient spouští vše na serveru pomocí jeho CPU a paměti a používá "
-"se pouze klientský displej.\n"
-"    Tlustý klient používá své vlastní CPU a paměť, ale souborový systém na "
-"serveru."
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "Vytváří se síťové zaváděcí obrazy pro všechna jádra"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Bude to trvat několik minut."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Hotovo!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-"Synchronizuje se seznam uživatelů na serveru se seznamem na klientovi, "
-"včetně roota."
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-"Chcete-li provést změny na tenkém klientovi, musí se restartovat správce "
-"displeje. Chcete jej restartovat teď?"
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr "Přehled terminálového serveru"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - Vytváří zaváděcí obrazy pro Etherboot:\n"
-"        \tChcete-li zavést jádro pomocí etherboot, musíte vytvořit zvláštní "
-"kombinaci jádra a initrd.\n"
-"        \tVětšinu práce za vás udělá mkinitrd-net a DrakTermServ je pouze "
-"grafické rozhraní\n"
-"        \tpro pomoc se správou či přizpůsobením těchto obrazů. Pro "
-"vytvoření\n"
-"         \tsouboru /etc/dhcpd.conf.etherboot-pcimap.include, který je "
-"použit\n"
-"         \tpro dhcpd.conf, musíte vytvořit etherboot obraz alespoň jednoho "
-"jádra."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"        - Udržuje /etc/dhcpd.conf:\n"
-"        \tKaždý ze síťově zaváděných klientů potřebuje záznam v dhcpd.conf, "
-"který mu přiřadí IP adresu\n"
-"        \ta síťový zaváděcí obraz pro daný počítač. DrakTermServ umožní "
-"tvorbu nebo odstranění těchto záznamů.\n"
-"\t\t\t\n"
-"        \t(U PCI karet lze vynechat obraz - etherboot si vyžádá správný "
-"obraz. Měli byste\n"
-"        \ttaké vzít v úvahu, že když hledá etherboot obrazy, očekává názvy "
-"jako\n"
-"        \tboot-3c59x.nbi, a ne boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tTypický soubor dhcpd.conf podporující bezdiskové klienty vypadá "
-"jako:"
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"       I když můžete použít rozsah IP adres místo nastavení specifického "
-"záznamu pro\n"
-"       počítač klienta, použití pevné adresy vám umožní zadat funkcionalitu\n"
-"       do souborů s nastavením pro specifického klienta, které poskytuje "
-"ClusterNFS.\n"
-"\t\t\t\n"
-"       Poznámka: Položku \"#type\" používá pouze DrakTermServ. Klienti mohou "
-"být buď \"thin\"\n"
-"       nebo \"fat\". Tencí klienti provozují většinu software na serveru "
-"pomocí XDMCP, tlustí klienti provozují většinu\n"
-"       software na klientském počítači. Zvláštní init%s, je\n"
-"       vytvořen pro tenkého klienty. Systémové soubory s nastavením xdm-"
-"config, kdmrc a gdm.conf jsou upraveny\n"
-"       při použití tenkých klientů tak, aby povolovaly XDMCP. Jelikož při "
-"použití XDMCP vznikají bezpečnostní rizika,\n"
-"       jsou upraveny soubory hosts.deny a hosts.allow tak, aby omezily "
-"přístup pouze z lokální sítě.\n"
-"\t\t\t\n"
-"       Poznámka: Položka  \"#hdw_config\" je použita pouze pro klienty a "
-"může buď 'true' nebo 'false'.\n"
-"       Hodnota 'true' povoluje přihlášení uživatele root dovoluje mu také "
-"změny\n"
-"v lokálním hardware u zvuku, myši pomocí nástrojů sady 'drak'tools.\n"
-"       V tomto případě se vytvoří konfigurační soubor asociovaný s IP "
-"adresou a vytvoří se\n"
-"       přípojný bod pro zápis, kam se tato konfigurace zapíše. Pokud jste\n"
-"       s konfigurací spokojeni, můžete právo pro uživatele root odebrat.\n"
-"\t\t\t\n"
-"       Poznámka: Po přidání nebo odebrání klientů musíte zastavit a znovu "
-"spustit server."
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Udržuje /etc/exports:\n"
-"        \t\tClusterNFS dovoluje exportovat kořenový souborový systém na "
-"bezdiskové klienty. DrakTermServ\n"
-"        \t\tnastaví odpovídající záznam tak, aby umožnil anonymní přístup ke "
-"kořenovému souborovému systému\n"
-"        \t\tbezdiskovým klientům.\n"
-"\n"
-"        \t\tTypický záznam pro export ClusterNFS vypadá:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tSe SUBNET/MASK odpovídající vaší síti."
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - Udržuje %s:\n"
-"        \tAby se mohli uživatelé přihlásit do systému z bezdiskových stanic, "
-"musí být duplikován\n"
-"        \tjejich záznam z /etc/shadow v %s. DrakTermServ v tomto ohledu\n"
-"        \tpomáhá přidáním nebo odebráním uživatelů systému z tohoto souboru."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - %s pro každého klienta:\n"
-"        \tSkrze ClusterNFS může mít každý bezdiskový klient své vlastní "
-"unikátní soubory s nastavením\n"
-"        \tumístěné na serveru v kořenovém souborovém systému. DrakTermServ "
-"bude v budoucnu pomáhat\n"
-"        \ts tvorbou těchto souborů."
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - Soubory s nastavením systému pro každého klienta:\n"
-"        \tSkrze clusternfs může mít každý bezdiskový klient své vlastní "
-"unikátní soubory s nastavením\n"
-"        \tumístěné na serveru v kořenovém souborovém systému. DrakTermServ "
-"bude v budoucnu pomáhat\n"
-"        \ts tvorbou těchto souborů,\n"
-"        \tnapř. /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard zvlášť pro\n"
-"        \tkaždého klienta.\n"
-"\n"
-"        Pozn. Povolení nastavení lokálního hardware umožní také přihlášení "
-"uživatele root\n"
-"        na terminálový server se všech stanic, které mají tuto možnost "
-"povolenu.\n"
-"        Lokální natavení hardware může být ale zakázáno, takže konfigurační\n"
-"soubory budou takové, jak byl klient nastaven."
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tDrakTermServ nastaví tento soubor tak, aby pracoval v souladu s "
-"obrazy vytvořenými pomocí\n"
-"        \tmkinitrd-net a záznamy v /etc/dhcpd.conf tak, aby byl každému "
-"bezdiskovému klientu poskytnut\n"
-"        \todpovídající zaváděcí obraz.\n"
-"\n"
-"        \tTypický soubor s nastavením TFTP vypadá takto:\n"
-"        \t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \t\tZměny oproti výchozí instalaci zahrnují změnu příznaku disable "
-"na\n"
-"        \t\t'no' a změnu cesty adresáře na /var/lib/tftpboot, kam ukládá\n"
-"        \t\tmkinitrd-net své obrazy."
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Spouštěcí disketa"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "Spouštěcí ISO"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "PXE obraz"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "Výchozí verze jádra"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr "Vytvářet obrazy PXE."
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Sestavit celé jádro -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Nebylo zvoleno žádné jádro!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Sestavit jedinou NIC -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "Není vybrána žádná síťová karta!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Sestavit všechna jádra -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Smazat"
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "Není zvolen žádný obraz!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Smazat všechny NBI"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Signalizuje, že heslo v databázi je jiné než které má v databázi\n"
-"Terminal Server.\n"
-"Smažte/znovu přidejte uživatele pro povolení přihlášení na Terminal Server."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Přidat uživatele -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Odebrat uživatele"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "typ: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "lokální konfigurace: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Povolit konfiguraci\n"
-"lokálního hardware."
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "Nepodařilo se vytvořit obraz pro spouštění ze sítě!"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Tenký klient"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Povolit tenké klienty"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-"Synchronizovat nastavení\n"
-"klávesnice X klienta se serverem."
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Přidat klienta -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "typ: tlustý"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "typ: tenký"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "Lokální konfigurace: false"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "lokální konfigurace: true"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Upravit klienta"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Zakázat lokální konfiguraci"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Odebrat klienta"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Nastavení dhcpd..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Pro aktivaci změn je potřeba správce oken restartovat.\n"
-"(příkaz v konzoli: service dm restart)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-"Tencí klienti nebudou pracovat s automatickým přihlášením. Vypnout jej?"
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "Všichni klienti budou používat %s"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Podsíť:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Maska sítě:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Směrovače:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Maska podsítě:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Adresa broadcastu:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Název domény:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "Jmenné servery:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "IP rozsah od:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "IP rozsah do:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr "Připojit TS Includes k existujícímu nastavení"
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Zapsat nastavení"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Nastavení serveru dhcpd"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Většina těchto údajů byla získána z vašeho\n"
-"běžícího systému. Můžete je upravit dle potřeby"
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Prosím vložte disketu:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Nelze pracovat s disketou!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Nyní můžete disketu vyjmout"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Není dostupná žádná disketová mechanika!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "Obraz pro PXE je %s/%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "Chyba při zapisování %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "ISO image pro Etherboot je %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Něco neproběhlo správně! - Je nainstalovaný program mkisofs?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Je nutné nejprve vytvořit soubor /etc/dhcpd.conf!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr "%s má špatné heslo v Terminál serveru - nový pokus...\n"
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s není uživatel...\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s je již uživatel pro Terminal Server\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "Přidání %s do Terminálového serveru selhalo!\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "%s přidán do Terminál serveru\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "Smazán %s...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "%s nenalezen...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow a /etc/hosts.deny jsou již nastaveny - beze změn"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Změnilo se nastavení - restartovat clusternfs/dhcpd?"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Chyba!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Nemohu najít potřebný soubor '%s ' s obrazem."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Nastavení automatické instalace"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"Chystáte se nastavit disketu pro automatickou instalaci. Tato volba je někdy "
-"nebezpečná a měla by se používat s opatrností.\n"
-"\n"
-"Tato disketa dovoluje zopakovat instalaci, která již na tomto počítači byla "
-"provedena s tím, že v některých krocích lze zadat jiné hodnoty.\n"
-"\n"
-"Pro maximální bezpečnost není rozdělování disků ani formátování prováděno "
-"automaticky, i přesto, pokud to při instalaci zvolíte.\n"
-"\n"
-"Stiskněte Ok pro pokračování."
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "zopakovat"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "ručně"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Nastavení automatických kroků"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vyberte si prosím, které z kroků instalace mají být provedeny automaticky "
-"stejně jako instalační program a které budou zadány ručně"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Vytvářím disketu pro automatickou instalaci"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Vložte jinou prázdnou disketu do mechaniky %s (pro disketu s ovladači)"
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Vytvářím disketu pro automatickou instalaci (disketu s ovladači)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Vítejte.\n"
-"\n"
-"Parametry pro automatickou instalaci jsou přístupné v sekci nalevo"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Gratuluji!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketa byla s úspěchem vytvořena.\n"
-"Nyní lze provést stejnou instalaci znovu."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Automatická instalace"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Přidat položku"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Odstranit poslední položku"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"Expect je rozšířením skriptovacího jazyka Tcl, který umožňuje interaktivní "
-"komunikaci bez zásahu uživatele."
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "Uloží heslo pro tento systém v konfiguraci aplikace drakbackup."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"U CD s více session pouze první session vymaže celé CDRW. Jinak bude CDRW "
-"vymazáno před každou zálohou."
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"Tato volba umožní uložit soubory, které se změnily.  Přesné chování záleží "
-"na tom zda bylo vybráno přírůstkové nebo rozdílové zálohování."
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"Přírůstkové zálohování zálohuje pouze ty soubory, které se změnily nebo jsou "
-"od poslední zálohy nové."
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Rozdílové zálohování zálohuje pouze ty soubory, které se změnily nebo jsou "
-"nové oproti 'základní' záloze."
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"Uživatelé, kterým chcete poslat výsledek zálohování mohou být zapsáni jako "
-"seznam čárkou oddělených uživatelů nebo email adres. Pro odeslání emailů "
-"potřebujete mít v systému funkční program pro elektronickou poštu."
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr "Soubory zapsané do souboru .backupignore nebudou zálohovány."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"Pro zálohu na jiná média budou nejdříve soubory vytvořeny na disku a potom "
-"přesunuty na jiné médium.  Zvolením této volby se po záloze smažou pomocné "
-"tar soubory z disku."
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"Některé protokoly, jako např. rsync, mohou být nastaveny na straně serveru. "
-"Místo použití adresářové cesty raději použijte pro cestu ke službě název "
-"'modulu'."
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"Vlastní nastavení dovoluje specifikovat libovolný den a hodinu. Další volby "
-"používají run-parts v /etc/crontab."
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr "Pro pravidelné operace (cron) nebyla vybrána žádná média."
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr "Pro pravidelné operace (cron) nebyl zvolen žádný interval."
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Služby intervalu cronu nejsou pro běžné uživatele dostupné"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-"\"%s\" není ani platná emailová adresa ani existující lokální uživatel!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"\"%s\" je lokální uživatel, ale nevybrali jste lokální SMTP server, takže "
-"musíte použít kompletní emailovou adresu."
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-"Seznam oprávněných uživatelů se změnil, zapisuji znovu konfigurační soubor."
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "Starý seznam uživatelů:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "Nový seznam uživatelů:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"         Report programu DrackBackup \n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"             Report démonu pro DrackBackup\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"               Detaily o reportu pro DrackBackup\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Celkový průběh"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s existuje, smazat?\n"
-"\n"
-"Pokud jste tak již jednou učinili, budete nejspíš muset\n"
-"vymazat příslušný záznam ze souboru authorized_keys na serveru."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Generování klíčů může chvíli trvat."
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "Nelze spustit %s."
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Žádná výzva na heslo na %s na portu %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Chybné heslo na %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Povolení odepřeno při přenosu %s na %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Nelze nalézt %s na %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s neodpovídá"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"Přenos úspěšný!\n"
-"Možná budete chtít zkontrolovat, zda se můžete přihlásit na server:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"bez dotazu na heslo."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "V mechanice není CDR/DVDR médium."
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Toto není zapisovatelné médium"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Toto není přepisovatelné médium!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Vymazání média může chvíli trvat."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problémy s právy při přístupu na CD."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "Není páska v %s!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Zálohovat systémové soubory..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Záložní soubory pevného disku..."
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Zálohovat soubory uživatelů..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Zálohovat další soubory..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Průběh zálohování na pevný disk... "
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Nejsou žádné změny pro zálohování!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Problémy FTP spojení: Nebylo možné poslat vaše soubory se zálohou přes "
-"FTP.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-"Chyba při posílání souboru přes FTP. Prosím opravte vaše nastavení FTP."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "seznam souborů poslaný přes FTP: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze CD:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Aktivity programu DrakBackup skrze pásku:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr "Chyba při posílání pošty. Vámi zvolené hlášení nebylo odesláno."
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Chyba při posílání pošty. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Nelze vytvořit katalog!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Zvolte prosím všechny volby, které potřebujete.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Tato volba zazálohuje a obnoví všechny soubory v adresáři /etc.\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Zálohovat vaše systémové soubory. (adresář /etc)"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr "Použít přírůstkovou/rozdílovou zálohu  (nepřepisovat starší zálohy)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Použít přírůstkovou zálohu"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "Použít rozdílové zálohování"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Nezahrnout kritické soubory (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr "Tato volba dovolí obnovit různé verze adresáře /etc."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Zvolte prosím všechny uživatele, které chcete zálohovat."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "Nezahrnout cache prohlížeče"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Vyberte soubory nebo adresáře a klepněte na 'OK'"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Odstranit vybrané"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Uživatelé"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Použít síťové připojení pro zálohování"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Síťová metoda:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "Použít Expect pro SSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "Vytvořit/Přenést záložní klíče pro SSH"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Přenést nyní"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Jiné (ne pro drakbackup) klíče jsou již na místě"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Název počítače nebo IP adresa."
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-"Adresář (nebo modul), do kterého bude umístěna záloha na tomto počítači."
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Pamatovat si heslo"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Potřebuji název počítače, uživatelské jméno a heslo!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Použít pro zálohování CD/DVD-ROM"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Vyberte CD/DVD zařízení"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Vyberte velikost vašeho média CD/DVD"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "Multisession CD"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "CDRW média"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Smazat CDRW médium (při prvním sezení)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " Vymazat nyní "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "DVD+RW média"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "DVD-R média"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "DVDRAM zařízení"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "Není definováno žádné CD zařízení!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Použít páskovou jednotku"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Název zařízení, na které se bude zálohovat"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr "Zálohovat přímo na pásku"
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Po provedení zálohy nepřevinout pásku"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Před zálohování pásku vymazat"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Vysunout pásku po dokončení zálohy"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Zadejte adresář, kam se bude zálohovat:"
-
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr "Adresář pro ukládání"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CD-ROM / DVD-ROM"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Pevný disk / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "každou hodinu"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "každý den"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "každý týden"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "každý měsíc"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "vlastní"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Leden"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "únor"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Březen"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "Duben"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Květen"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Červen"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Červenec"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Srpen"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Září"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Říjen"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Listopad"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "prosinec"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Neděle"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Pondělí"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Úterý"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "středa"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "čtvrtek"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Pátek"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Sobota"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Použít démona"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Vyberte si interval mezi jednotlivými zálohami"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "Vlastní nastavení/záznam v tabulce crontab:"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Minuta"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Hodina"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "den"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Měsíc"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Středa"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Prosím zvolte si médium pro zálohy."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Ujistěte se prosím, že mezi službami je přítomen cron démon."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-"Pokud není váš počítač neustále zapnut, možná budete chtít nainstalovat "
-"anacron."
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr "V tuto chvíli také všechna 'síťová' média používají pevný disk."
-
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr "Vyberte prosím typ komprimace"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Použít .backupignore soubory"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Poslat report po záloze mailem na:"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "SMTP server pro poštu:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Smazat pomocné tar soubory po záloze na jiné médium."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Co"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Kde"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Kdy"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Další volby"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "Cíl zálohování není nastaven..."
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Nastavení pro DrakBackup"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Vyberte si, prosím, kam chcete zálohovat."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "Pevný disk pro přípravu zálohy na všechna zařízení"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "Přes síť"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "Na CD-R"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "Na pásku"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Zálohovat uživatele"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (Výchozí - všechny uživatele)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Prosím vyberte si, co chcete zálohovat"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Zálohovat systém"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Vybrat uživatele ručně"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Zkontrolujte prosím data pro zálohování..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Zdroje pro zálohu:\n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systémové soubory:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Soubory uživatelů:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Další soubory:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Uložit na pevný disk do adresáře: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tNastavit limit pro místo na disku na %s MB\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Smazat pomocné tar soubory po provedení zálohy.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- Vypálit na CD"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " na zařízení: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (multi-session)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Uložit na pásku na zařízení: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr "\tZálohovat přímo na pásku\n"
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- Uložit pomocí %s na počítač: %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t uživatelské jméno: %s\n"
-"\t\t cesta: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Volby:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tNezahrnout systémové soubory\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tZálohování používá tar a bzip2\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tZálohování používá tar a gzip\n"
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tZálohování používá pouze tar\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\tPoužít .backupignore soubory\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tPoslat mail na %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tPřes SMTP server %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Démon, %s přes:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Pevný disk.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Páska \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Sítí přes FTP.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Sítí přes SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Sítí přes rsync.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Pro první spuštění použijte Průvodce nebo Rozšířené.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Seznam dat pro obnovení:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- Obnovit systémové soubory.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - od data: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- Obnovit soubory uživatelů: \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- Obnovit další soubory: \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Seznam poškozených dat:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Zrušte nebo odstraňte při dalším spuštění tuto volbu."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Záložní soubory jsou poškozené"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          Všechna vybraná data byla              "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          úspěšně obnovena na %s         "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "          Obnovit nastavení         "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "Obnovit také ostatní soubory."
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Seznam uživatelů pro obnovení (od každého bude obnovena pouze poslední "
-"záloha)"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "Vyberte datum obnovení zálohy:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Obnovit z pevného disku."
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Zadejte adresář, kde jsou umístěny zálohy"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr "Adresář se zálohami"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Vyberte další médium, kde jsou umístěny zálohy"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Další média"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Obnovit systém"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Obnovit uživatele"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Obnovit ostatní"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "vyberte cestu pro obnovení (místo /)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "Cesta pro obnovení"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Provést novou zálohu před obnovou (pouze pro přírůstkovou zálohu)"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "Odebrat adresáře uživatele před obnovou."
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr "Hledaný název souboru (prázdný řetězec vybere vše):"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "Vyhledat zálohy"
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "Žádný výskyt nenalezen..."
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Obnovit vybrané"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-"Klepněte na datum/čas pro zobrazení zálohovaných souborů.\n"
-"Více souborů vyberete pomocí stisknutí klávesy CTRL."
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"Vybrána obnova\n"
-"Záznam katalogu"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Vybrána obnova\n"
-"Soubory"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "Souboru pro zálohu z %s nenalezeny."
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Obnovit z CD"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Vložte CD s označením %s do CD\n"
-" mechaniky připojené do adresáře /mnt/cdrom"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "CD nemá správný název. Je označeno %s."
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Obnovit z pásky"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Vložte pásku s názvem %s\n"
-" do páskové jednotky %s"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Páska nemá správný název. Má označení %s."
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Obnovit přes síť"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Obnovit přes síť pomocí protokolu: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Název počítače"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Cesta na počítači nebo modul"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Vyžadováno heslo"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Vyžadováno uživatelské jméno"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Vyžadován název počítače"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Vyžadována cesta nebo modul"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "Soubory obnoveny..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Obnova selhala..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "%s nenačten..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Vyhledat soubory, které se budou obnovovat"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Obnovit všechny zálohy"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Vlastní obnova"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Obnovit z katalogu"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Nelze najít data ze zálohy pro obnovu...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Ověřte, že %s je správná cesta"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " a CD je v mechanice"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr "Zálohy na nevyjímatelná média - Použít katalog pro obnovu"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "CD je v mechanice - pokračovat."
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "Procházet nově obnovený adresář."
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr "Adresář, ze kterého se má obnovit"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Průběh obnovení"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Vytvořit zálohu"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Obnovit"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Je potřeba nainstalovat tyto balíčky:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Prosím zvolte data pro obnovu..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Zálohovat systémové soubory"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Zálohovat uživatelské soubory"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Zálohovat další soubory"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Celkový průběh"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "Posílám soubory pomocí FTP"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Posílám soubory..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Zálohovat z konfiguračního souboru"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Prohlédnout konfiguraci zálohy."
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Průvodce konfigurací"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Rozšířená konfigurace"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Zobrazit nastavení"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "Zobrazit poslední log"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Zálohovat nyní"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Nebyl nalezen konfigurační soubor, \n"
-"klepněte na Průvodce nebo na Rozšířené."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "DrakBackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Soubor"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Soubor/U_končit"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>K"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"Zavaděč systému není v režimu framebuffer. Pro aktivaci spouštění v "
-"grafickém režimu vyberte video režim v konfiguračním nástroji pro zavaděč."
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "Chcete to nastavit nyní?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Instalovat motivy"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Výběr tématu pro grafické přihlášení"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Téma"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Zobrazit motiv\n"
-"na konzoli"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Vytvořit nový motiv"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Výchozí uživatel"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Výchozí pracovní plocha"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Ne, nechci automatické přihlášení"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ano, chci automatické přihlášení s tímto (uživatelem, desktopem)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Systémový režim"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Spustit grafické prostředí při startu systému"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-"Vyberte prosím video režim, který bude aplikován na všechny níže vybrané "
-"položky zavaděče.\n"
-"Ujistěte se prosím, že vaše grafická karta podporuje režim, který vyberete."
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Nástroj distribuce Mandriva Linux pro hlášení chyb"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Ovládací centrum Mandriva Linux"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Nástroj na synchronizaci"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Samostatné nástroje"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Vzdálené ovládání"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Správce software"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Nástroj pro migraci z Windows"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "UserDrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Průvodci nastavením"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr "Vyberte nástroj Mandriva:"
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"nebo název aplikace\n"
-"(nebo plnou cestu):"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Najít balíček"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Balíček: "
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Jádro: "
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"Chcete-li poslat hlášení o chybě, klepněte na tlačítko pro nahlášení chyby.\n"
-"Otevře se okno prohlížeče sítě Internet na adrese %s,\n"
-"kde najdete formulář k vyplnění. Výše zobrazené informace budou přeneseny na "
-"tento server.\n"
-"K nahlášené chybě je užitečné přiložit výstup příkazu lspci, verzi jádra a "
-"obsah souboru /proc/cpuinfo."
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Hlášení"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Není instalováno"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Balíček není nainstalován"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "nedefinováno"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Změna časové zóny"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Časové zóna - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Jsou vaše hardwarové hodiny nastaveny na GMT?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "Protokol síťového času"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"Váš počítač může synchronizovat své hodiny\n"
-"se vzdáleným časovým serverem pomocí protokolu NTP"
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Povolit protokol síťového času"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Server:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr "Nelze synchronizovat s %s."
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Přenastavit"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Chcete-li povolit protokol síťového času,\n"
-"je nutné nainstalovat balíček ntp.\n"
-"\n"
-"Chcete nainstalovat balíček ntp?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Nastavení sítě (%d adaptéry(ů))"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Brána(gateway):"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Rozhraní:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Čekejte prosím"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Rozhraní"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Stav"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Název počítače: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Nastavit název počítače..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "Nastavení LAN"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Nastavit lokální síť..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Použít"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Správa připojení"
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr "Vybrané zařízení"
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "Nastavení IP"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "DNS servery"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Prohledávaná doména"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "statická"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Řízení toku"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Ukončení linky"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Čas vypršení pro modem"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Použít soubor se zámkem"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Počkat na oznamovací tón"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "Čekání při obsazení"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "Hlasitost modemu"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Povolit"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Vypnout"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Třída médií"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Název modulu"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "MAC adresa"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Sběrnice"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Umístění na sběrnici"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ve vašem počítači nebyl nalezen žádný síťový adaptér. Spusťte prosím program "
-"pro nastavení hardware."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Odstranit síťové rozhraní"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Zvolte síťové rozhraní pro odstranění:"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Vyskytl se problém při odstraňování síťového rozhraní \"%s\": \n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "Gratulujeme, síťové rozhraní \"%s\" bylo úspěšně odstraněno"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "Bez IP"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Bez masky"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "zapnuto"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "vypnuto"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Připojen"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Nepřipojen"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Odpojit..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Připojit..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "Varování, bylo detekováno jiné připojení k Internetu, zřejmě je to síť"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "Deaktivovat nyní"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "Aktivovat nyní"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nemáte nakonfigurováno žádné rozhraní.\n"
-"Nastavte jej klepnutím na 'Konfigurovat'"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "Nastavení LAN"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptér %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Protokol o spuštění"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Spustit při startu"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Toto rozhraní ještě nebylo nastaveno.\n"
-"Spusťte průvodce \"Přidat rozhraní\" z Ovládacího centra Mandriva Linux"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Nemáte nastaveno žádné připojení k Internetu.\n"
-"Spusťte průvodce \"%s\" z Ovládacího centra Mandriva Linux"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Nastavení nového síťového rozhraní (LAN, ISDN, ADSL, ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfigurace připojení k internetu"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "Třetí DNS Server (nepovinný)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfigurace připojení k internetu"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Přístup na Internet"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Typ připojení:"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Stav:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr "GDM (Správce obrazovky GNOME)"
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr "KDM (Správce obrazovky KDE)"
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr "MdkKDM (Správce obrazovky Mandriva Linux)"
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr "XDM (Správce obrazovky X)"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Výběr správce oken"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Správce přihlášení pro X11 umožňuje se přihlásit přes grafické\n"
-"rozhraní k bežícímu systému X Window a podporuje spuštění různých\n"
-"X sezení na lokálním počítači současně."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Změny provedeny, chcete restartovat službu dm?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-"Chystáte se zavřít všechny běžící programy a ztratit vaše současné sezení. "
-"Jste si opravdu jisti, že chcete restartovat službu dm?"
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "Vytváření zaváděcí diskety"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Obecné"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Zařízení"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Verze jádra"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Předvolby"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Rozšířené volby"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Velikost"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Volitelné argumenty pro mkinitrd"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "vnutit"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "vynechat RAID moduly"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "pokud je potřeba"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "vynechat SCSI moduly"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Přidat modul"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Odebrat modul"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Zkontrolujte, zda v je zařízení %s vloženo médium"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"V zařízení %s není žádné médium, nebo je médium chráněno proti zápisu.\n"
-"Vložte prosím nějaké."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Nelze provést fork: %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Vytváření diskety ukončeno"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "Vytvoření zaváděcí diskety bylo úspěšně dokončeno \n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Nelze korektně ukončit mkbootdisk: \n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Hledám instalovaná písma"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Odznačit instalovaná písma"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "zpracovávám všechna písma"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "Nebyla nalezena žádná písma"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "hotovo"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "V připojeném oddílu nelze nalézt žádná písma"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Znovu vybrat správná písma"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "Nelze nalézt žádné písmo.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Hledat písma mezi instalovanými"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "konverze %s písem"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Kopírování písem"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Instalace písem True Type"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "čekejte prosím, právě běží ttmkfdir... "
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "Instalace True Type písem je dokončena"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "vytvářím type1inst"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "Odkazy na Ghostscript"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Ignorovat dočasné soubory"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Restartovat XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Potlačit soubory s písmy"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "restart xfs"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Před instalací písem se ujistěte, že máte potřebná práva na jejich instalací "
-"a používání na vašem systému.\n"
-"\n"
-"- Písma lze instalovat běžným způsobem. Ve výjimečných případech může špatné "
-"písmo způsobit zamrznutí X serveru."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Seznam písem"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "O aplikaci"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Odinstalovat"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Import"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"Copyright ©2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (původní verze)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Tento program je svobodný software; můžete jej šířit nebo modifikovat\n"
-"za podmínek GNU General Public Licence, která byla publikována\n"
-"Free Software Foundation; buď verze 2, nebo (podle vaší volby)\n"
-"kterékoli pozdější verze.\n"
-"\n"
-"Tento program je distribuován s nadějí, že bude užitečný,\n"
-"ale BEZ JAKÝCHKOLIV ZÁRUK a BEZ NÁROKU NA OBCHODOVATELNOST.\n"
-"ČI NA VHODNOST PRO POUŽITÍ ZA URČITÝM ÚČELEM.\n"
-"Více podrobností naleznete v licenci GNU General Public Licence.\n"
-"\n"
-"Kopii GNU General Public Licence můžete obdržet buď s tímto programem\n"
-"nebo si o ní můžete napsat na adresu Free Software Foundation, Inc.,\n"
-"59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"Poděkování:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t od Kena Borgendale:\n"
-"\t    Převádí soubor z Windows .pfm  na soubor .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t od Jamese Macnicol: \n"
-"\t    type1inst generuje soubory fonts.dir fonts.scale a mapu písem.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  od Andrewa Weekse, Franka Siegerta, Thomase Henlicha, Sergeye Babkina  \n"
-"             Převádí soubory písem ttf na písma afm a pfb\n"
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Zvolte aplikace, které podporují tato písma:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Před instalací písem se ujistěte, že máte potřebná práva k jejich instalací "
-"a používání na vašem systému.\n"
-"\n"
-"Písma lze instalovat běžným způsobem. Ve výjimečných případech může špatné "
-"písmo způsobit zamrznutí X serveru."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Obecné tiskárny"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vyberte soubor s písmem nebo adresář a klepněte na 'Přidat'"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Výběr souboru"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Import písem"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Zavést písma"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "klepněte zde, pokud jste si jisti."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "zde pokud si nejste jisti."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Zrušit celý výběr"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Vybrat vše"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Odebrat seznam"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "Import písem"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Úvodní testy"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopírovat písma do systému"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Instalovat a převést písma"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Poinstalační nastavení"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Odebrat písma ze systému"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Nastavení po odebrání"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Sdílení Internetového Připojení"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Omlouváme se, ale podporujeme pouze jádra řady 2.4 a výše."
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Sdílení Internetového připojení je vypnuto"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Internetové sdílení už bylo nastaveno.\n"
-"Nyní je vypnuto.\n"
-"\n"
-"Co chcete dále dělat?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "povolit"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "překonfigurovat"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "odmítnout"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Povoluji servery..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Sdílení Internetového připojení je nyní zapnuto."
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Sdílení Internetového připojení je zapnuto"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Sdílení internetového připojení už bylo nastaveno.\n"
-"Nyní je povoleno.\n"
-"\n"
-"Co chcete dále dělat?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "vypnout"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Zakazuji servery..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Sdílení Internetového připojení je nyní vypnuto."
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Váš počítač bude nastaven pro sdílení svého připojení k Internetu.\n"
-"Tato vlastnost umožňuje přístup dalších počítačů na lokální síti k síti "
-"Internet přes připojení tohoto počítače.\n"
-"\n"
-"Před pokračováním se ujistěte, že jste nastavili vaši síť a připojení k "
-"Internetu pomocí aplikace drakconnect.\n"
-"\n"
-"Pozn.: Pro nastavení lokální sítě (LAN) potřebujete vyhrazený síťový adaptér."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rozhraní %s (používá modul %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Rozhraní %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Ve vašem systému není žádný síťový adaptér!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Síťové rozhraní"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Na vašem systému je nastaveno pouze jedno síťové rozhraní:\n"
-"\n"
-"%s\n"
-"\n"
-"Na tomto adaptéru bude nastavena lokální síť."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Zvolte síťové rozhraní"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Prosím zvolte si, ke kterému síťovému adaptéru bude připojena LAN."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Síťové rozhraní je již nastaveno"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Varování, síťový adaptér  (%s) je již nastaven.\n"
-"\n"
-"Chcete ho automaticky přenastavit?\n"
-"\n"
-"Lze to také provést ručně, ale musíte vědět, co děláte."
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatické přenastavení"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "Ne (pouze pro experty)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Zobrazit aktuální nastavení rozhraní"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Aktuální nastavení rozhraní"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuální konfigurace pro '%s':\n"
-"\n"
-"Síť: %s\n"
-"IP adresa: %s\n"
-"IP atributy: %s\n"
-"Ovladač: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Mohu zachovat současné nastavení a předpokládat, že máte již nastavený DHCP "
-"server; v takovém případě ověřte, že je správně převzato nastavení sítě "
-"odpovídající vaší lokální síti; nebude v něm provedena žádná změna a nebude "
-"ani změněno nastavení DHCP serveru.\n"
-"\n"
-"Výchozí záznam DNS je vyrovnávací jmenný server (caching nameserver) "
-"nastavený na vašem firewallu. Tento záznam lze nahradit například IP adresou "
-"vašeho poskytovatele připojení k Internetu.\n"
-"\n"
-"Jinak mohu změnit jak rozhraní, tak také přenastavit DHCP server podle "
-"potřeby.\n"
-"\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Adresa lokální sítě"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"Nastavení DHCP serveru.\n"
-"\n"
-"Zde můžete vybrat různé volby nastavení DHCP serveru.\n"
-"Pokud nevíte, co která volba znamená, ponechte její výchozí hodnotu."
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Adresa DHCP serveru"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "IP adresa DNS serveru"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Interní název domény"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "Počátek pásma adres DHCP"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "Konec rozsahu DHCP adres"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Výchozí doba pronájmu (sekundy)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maximální doba pronájmu (sekundy)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Přenastavení rozhraní a DHCP serveru"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Číslo lokální sítě nekončí na .0, zkouším znovu."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Našel jsem možný konflikt v současném nastavení LAN adresy pro %s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Nastavuji..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Nastavuji skripty, instaluji software, startuji servery..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problém s instalací balíčku %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Vše se podařilo nastavit.\n"
-"Nyní lze použít tento počítač pro sdílení připojení k Internetu pro vaši "
-"lokální síť, která používá automatickou konfiguraci sítě (DHCP) a\n"
-"transparentní proxy a cache server (Squid)."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"Copyright ©2003-2005 Mandriva.\n"
-"Toto je svobodný software a je šířen pod licencí GNU GPL.\n"
-"\n"
-"Použití: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - zobrazí tuto nápovědu     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_label>       - načte HTML stránku s nápovědou, která odpovídá "
-"id_label\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-" --doc <odkaz>          - odkaz na jinou webovou stránku ( pro uvítací "
-"stránku správců oken)\n"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Centrum nápovědy Mandriva Linux"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"%s nelze zobrazit.\n"
-"K této položce není žádná nápověda\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Nastavení systému"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Vlastní nastavení"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Vlastní & systémová nastavení"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Upravitelný"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Cesta"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Uživatel"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Skupina"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Oprávnění"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Upravit současné pravidlo"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Zde můžete vidět soubory, které se používají k opravám oprávnění, vlastníků "
-"a skupin aplikací msec.\n"
-"Můžete také vytvářet svá vlastní pravidla, která přepíší pravidla výchozí."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"Aktuální úroveň zabezpečení je %s.\n"
-"Vyberte si práva pro zobrazení/úpravu"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Nahoru"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Posunout vybrané pravidlo o úroveň výše"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Dolů"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Posunout vybrané pravidlo o úroveň níže"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Přidat pravidlo"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Přidat nové pravidlo na konec"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Smazat vybrané pravidlo"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Upravit"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "procházet"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "uživatel"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "skupina"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "ostatní"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Čtení"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "Povolit \"%s\" číst soubor"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Zápis"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "Povolit \"%s\" zapisovat do souboru"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Provést"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Povolit \"%s\" spouštět soubory"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Použito pro adresář:\n"
-" pouze vlastník adresáře nebo souboru v tomto adresáři jej může smazat"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Použít při spuštění ID vlastníka"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Použít při spuštění ID skupiny"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Uživatel:"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Skupina:"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Aktuální uživatel"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "Pokud je zaškrtnuto, vlastník a skupina nebudou změněny"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Výběr cesty"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Vlastnost"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Nastavení PXE serveru"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Nastavení pro instalaci serveru"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Váš počítač bude nastaven jako instalační PXE server se službou DHCP\n"
-"a TFTP serveru.\n"
-"Tato vlastnost umožňuje instalovat další počítače na lokální síti pomocí\n"
-"počítače.\n"
-"\n"
-"Před pokračováním se ujistěte, že jste nastavili vaši síť a připojení k "
-"Internetu pomocí aplikace drakconnect.\n"
-"\n"
-"Pozn.: Pro nastavení lokální sítě (LAN) potřebujete vyhrazený síťový adaptér."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Vyberte si prosím, který síťový adaptér chcete použít pro dhcp server."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Rozhraní %s (na síti %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP server dovoluje dalším počítačům spuštění pomocí PXE s využitím daného "
-"rozsahu adres.\n"
-"\n"
-"Síťová adresa je %s a použitá maska je %s\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "Počátek rozsahu DHCP adres"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "Konec rozsahu DHCP adres"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Určete, kde je umístěn instalační obraz.\n"
-"\n"
-"Pokud nemáte již existující adresář, zkopírujte prosím obsah CD nebo DVD.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Adresář s obrazem instalace"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Obraz nebyl nalezen"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Nebyl nalezen CD či DVD obraz, prosím zkopírujte instalační program a rpm "
-"soubory."
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Určete, kde je umístěn soubor auto_install.cfg.\n"
-"\n"
-"Ponechte prázdné, pokud nechcete použít režim automatické instalace.\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Umístění souboru auto_install.cfg"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr "ESSID"
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Režim"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Kanál"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr "Klíč"
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Síť:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Režim:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Šifrování:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Signál:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr "Roaming"
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr "Roaming: %s"
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "vypnuto"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr "Interval hledání (s): "
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr "Nastavit"
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr "Známé sítě (přesuňte nahoru/dolů nebo upravte)"
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Připojit"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr "Dostupné sítě"
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Znovu prohledat"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Stav"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Odpojit se"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Obnovit"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "zapnuto"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "OBA"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "LOKÁLNÍ"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Ignorovat"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"Zde můžete nastavit úroveň zabezpečení a administrátora vašeho systému.\n"
-"\n"
-"\n"
-"'<span weight=\"bold\">Administrátor bezpečnosti</span>' je ten, který\n"
-"dostává bezpečnostní upozornění pokud je zvolena volba\n"
-" '<span weight=\"bold\">Bezpečnostní varování</span>'. Může to být jméno\n"
-"uživatele nebo email adresa.\n"
-"\n"
-"\n"
-"Nabídka s '<span weight=\"bold\">úrovněmi zabezpečení</span>' poskytovaných\n"
-"aplikací msec vám dovoluje si vybrat jednu z šesti přednastavených úrovní.\n"
-"Rozsah úrovní je od '<span weight=\"bold\">minimální</span>' zabezpečení\n"
-"až po '<span weight=\"bold\">paranoidní</span>' zabezpečení, vhodné pro \n"
-"velmi citlivé serverové aplikace:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Slabá</span>: Toto je absolutně "
-"nezabezpečená\n"
-"úroveň. Měla by být použita pouze na těch počítačích, které nejsou "
-"připojeny\n"
-"síti a nemá k nim kdokoliv přístup.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standardní</span>: Standardní doporučená\n"
-"úrovně pro počítače, které jsou připojeny k Internetu jako klient.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Vyšší</span>: Zde jsou už nějaké restrikce\n"
-"a každou noc jsou prováděny automatické kontroly.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Vysoká</span>: Tato úroveň je již vhodná "
-"při\n"
-"použití počítače jako serveru s tím, že s k tomuto počítači připojují další\n"
-"klienti. Pokud je počítač pouze klientem, je vhodnější nižší úroveň.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoidní</span>: Je stejná jako předchozí\n"
-"úroveň s tím, že systém je zcela uzavřen a bezpečnost nastavena na maximum"
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Popis polí:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(výchozí hodnota: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Úroveň zabezpečení:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Správce zabezpečení:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Základní volby"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Volby sítě"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Systémové volby"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Pravidelné kontroly"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Čekejte prosím, nastavuji úroveň zabezpečení..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Čekejte prosím, nastavuji volby zabezpečení..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Nebyla nalezena žádná zvuková karta!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"V počítači nebyla nalezena žádná zvuková karta karta. Zkontrolujte prosím,"
-"zda podporovaná karta je správně zapojena.\n"
-"\n"
-"\n"
-"Databázi hardware lze nalézt na:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Pozn: Pokud máte PnP zvukovou kartu na ISA, použijte program sndconfig nebo "
-"alsaconf. Spustíte je příkazem \"sndconfig\" nebo \"alsaconf\" v konzoli."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"pro správnou funkci je požadován balíček ImageMagick.\n"
-"Balíček nainstalujete tlačítkem \"OK\", nebo skončete tlačítkem \"Zrušit\"."
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"hodnota pro x souřadnici\n"
-"pro textový box v počtu znaků"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"hodnota pro y souřadnici\n"
-"pro textový box v počtu znaků"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "šířka textu"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "výška textového boxu"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"umístění x souřadnice pro\n"
-"levý horní roh lišty s průběhem"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"umístění y souřadnice pro\n"
-"levý horní roh lišty s průběhem"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "šířka lišty s průběhem"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "výška lišty s průběhem"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Zobrazit logo na konzoli"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Název motivu"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "konečné rozlišení"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "uložit motiv"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "ukládám motiv pro Bootsplash ..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "vyberte obraz"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Výběr barvy pro lištu s průběhem"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr "Připojení pomocí sériového portu nebo USB kabelu"
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "Přidat zařízení UPS"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Vítejte v nástroji pro nastavení UPS.\n"
-"\n"
-"Zde lze přidat novou UPS do vašeho systému.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-"Chystáte se přidat zařízení UPS.\n"
-"\n"
-"Dáváte přednost automatickému nalezení zařízení UPS, která jsou připojena k "
-"tomuto počítači?"
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "Autodetekce"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Probíhá detekce"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Gratulujeme"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "Průvodce úspěšně přidal následující zařízení UPS:"
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "Žádná nová zařízení UPS nebyla nalezena"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "Nastavení ovladače UPS"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "Vyberte prosím váš model UPS."
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "Výrobce / Model:"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-"Nastavuje se UPS \"%s\" od \"%s\".\n"
-"Vyplňte prosím název, ovladač a příslušný port."
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Název:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr "Název vaší UPS"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr "Ovladač, který řídí vaši UPS"
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Port:"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "Port, na který je vaše zařízení UPS připojeno"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "Průvodce úspěšně nastavil nové zařízení UPS \"%s\"."
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "Zařízení UPS"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Název"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "Uživatelé UPS"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr "Kontrola přístupu"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr "Maska IP"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Pravidla"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Akce"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Úroveň"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "Název ACL"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUPS"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Vítejte v nástroji pro nastavení UPS"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "VPN spojení je zapnuto."
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Nastavení VPN spojení bylo již provedeno.\n"
-"\n"
-"Nyní je povoleno.\n"
-"\n"
-"Co chcete dále dělat?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "Deaktivuji VPN..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "VPN spojení je nyní vypnuto."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "VPN spojení je vypnuto"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Nastavení VPN spojení bylo již provedeno.\n"
-"\n"
-"Nyní je vypnuto.\n"
-"\n"
-"Co chcete dále dělat?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "Aktivuji VPN..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "VPN spojení je nyní zapnuto."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "Jednoduché nastavení VPN."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-"Chystáte se nastavit váš počítač, aby používal VPN připojení.\n"
-"\n"
-"Pomocí této vlastnosti mohou počítače na vaší lokální neveřejné síti\n"
-"a počítače na jiných, vzdálených neveřejných sítích sdílet vzájemně\n"
-"své zdroje skrze své firewally, přes síť Internet a to bezpečně.\n"
-"\n"
-"Komunikace jdoucí po síti Internet je šifrována. Místní a vzdálené počítače\n"
-"vypadají, jako by byly na stejné síti.\n"
-"\n"
-"Než budete pokračovat, ujistěte se, že jste nastavili váš přístup k síti\n"
-"a Internetu pomocí nástroje drakconnect."
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-"VPN spojení.\n"
-"\n"
-"Tento program je založen na následujících projektech:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - dokumentace a manuálové stránky instalované s balíčkem %s\n"
-"\n"
-"Před tím, než budete pokračovat, si prosím přečtěte ASPOŇ\n"
-"dokumentaci ipsec-howto."
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Modul jádra."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-"Jádro potřebujete mít podporu pro ipsec.\n"
-"\n"
-"Nyní běží jádro verze %s\n"
-"\n"
-"Toto jádro má '%s' podporu."
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Bezpečnostní politika"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "IKE démon racoon"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Konfigurační soubor"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-"Krok nastavení!\n"
-"\n"
-"Je třeba definovat bezpečnostní politiku a poté\n"
-"nastavit démona pro automatickou výměnu klíčů (IKE).\n"
-"Démon KAME IKE, kterého používáme, se nazývá \"racoon\".\n"
-"\n"
-"Co chcete nastavit?\n"
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-"Dále nastavíme soubor %s.\n"
-"\n"
-"\n"
-"Stiskněte tlačítko Další.\n"
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s položek"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-"Obsah souboru %s\n"
-"je rozdělen do sekcí.\n"
-"\n"
-"Nyní můžete:\n"
-"\n"
-"  - zobrazit, přidat, upravit nebo odebrat sekce\n"
-"  - a potom povrdit provedené změny\n"
-"\n"
-"Co chcete nyní dělat?\n"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Zobrazit"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Potvrdit"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Zobrazit nastavení"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-"Soubor %s neexistuje.\n"
-"\n"
-"Jedná se tedy o novou konfiguraci.\n"
-"\n"
-"Musíte se tedy vrátit a vybrat 'Přidat'.\n"
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "položky souboru ipsec.conf"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"Soubor %s obsahuje několik oddílů.\n"
-"\n"
-"Zde je jeho kostra:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"Nyní můžete přidat jeden z těchto oddílů.\n"
-"\n"
-"Vyberte oddíl, který chcete přidat.\n"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "config setup"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "normal conn"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Existuje!"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-"Sekce se tímto názvem již existuje.\n"
-"Název sekce musí být unikátní.\n"
-"\n"
-"Musíte se vrátit zpět a přidat další sekci\n"
-"nebo změnit její název.\n"
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Tato sekce musí být uvedena v konfiguračním\n"
-"souboru %s nejdříve.\n"
-"\n"
-"Ujistěte se, že další sekce jsou vedeny pod touto sekcí.\n"
-"\n"
-"Vyberte pokračovat nebo zpět pokud jste hotovi.\n"
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "interfaces"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsdebug"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "plutodebug"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "plutoload"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "plutostart"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "uniqueids"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-"Toto je první sekce konfiguračního souboru.\n"
-"\n"
-"Zde se nastavují výchozí hodnoty.\n"
-"Všechny další sekce jsou uvedeny až za ní.\n"
-"Nastavení na levé straně je volitelné. Pokud jej\n"
-"nenastavíte zde jako globální, můžete jej potom\n"
-"nastavit pro každou sekci.\n"
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "left"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Konfigurační soubor %s má několik sekcí nebo připojení.\n"
-"\n"
-"Můžete nyní přidat novou sekci.\n"
-"Pokud jste hotovi, zvolte pokračovat.\n"
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "název sekce"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "auto"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "right"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "rightcert"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-"Oddíl s tímto názvem již existuje.\n"
-"Názvy oddílů musí být unikátní.\n"
-"\n"
-"Musíte se vrátit a přidat jiný oddíl\n"
-"nebo změnit název oddílu.\n"
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Přidat bezpečnostní politiku.\n"
-"\n"
-"Nyní můžete přidat bezpečnostní politiku (Security Policy).\n"
-"\n"
-"Po jejím výběru bude následovat zápis dat.\n"
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Upravit sekci"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-"Soubor %s má několik sekcí nebo spojení.\n"
-"\n"
-"Níže si ze seznamu vyberte tu, kterou chcete upravit a potom\n"
-"klepněte na Další.\n"
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Název sekcí"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "Nelze upravit!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-"Nelze upravit tento oddíl.\n"
-"\n"
-"Tento oddíl je povinný pro FreeS/WAN 2.X.\n"
-"Na začátek souboru %s je nutné zadat\n"
-"verzi 2.0 a poté povolit či zakázat oportunistické\n"
-"šifrování.\n"
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Soubor %s má několik sekcí.\n"
-"\n"
-"Nyní můžete upravit položky pro sekci setup.\n"
-"Pokud jste hotovi, vyberte pokračovat.\n"
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Soubor %s má několik sekcí nebo spojení.\n"
-"\n"
-"Nyní můžete upravit položky pro výchozí sekci.\n"
-"Pokud jste hotovi, vyberte pokračovat.\n"
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Váš soubor %s má několik oddílů nebo připojení.\n"
-"\n"
-"Nyní můžete upravit běžné položky oddílu.\n"
-"\n"
-"Pokud jste hotovi, bude následovat zápis dat.\n"
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Upravit bezpečnostní politiku.\n"
-"\n"
-"Nyní můžete upravit bezpečnostní politiku (Security Policy).\n"
-"\n"
-"Po jejím upravení bude následovat zápis dat.\n"
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Odebrat sekci"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-"Váš soubor %s obsahuje několik oddílů nebo připojení.\n"
-"\n"
-"Níže můžete vybrat, co chcete odstranit, a pokračovat dále.\n"
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-"Konfigurace souboru racoon.conf.\n"
-"\n"
-"Obsah tohoto souboru je rozdělen do několika sekcí.\n"
-"Obsah můžete nyní:\n"
-"  - zobrazit \t\t (zobrazí obsah souboru)\n"
-"  - přidat \t\t\t(přidá jednu sekci)\n"
-"  - upravit \t\t (upraví parametry existující sekce)\n"
-"  - odebrat \t\t (odebere existující sekci)\n"
-"  - potvrdit \t\t (zapíše změny do skutečného souboru)"
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-"Soubor %s neexistuje.\n"
-"\n"
-"Jedná se tedy o novou konfiguraci.\n"
-"\n"
-"Musíte se tedy vrátit zpět a zvolit konfiguraci.\n"
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "položky souboru racoonf.conf"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"Krok přidání oddílu.\n"
-"\n"
-"Níže je uvedena kostra souboru racoon.conf:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Vyberte oddíl, který chcete přidat.\n"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "path"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "remote"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-"Krok \"přidání cesty\" k oddílu.\n"
-"\n"
-"Oddíly s cestami se musí nacházet na začátku souboru racoon.conf.\n"
-"\n"
-"Po umístění myši nad položku s certifikátem se zobrazí nápověda."
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "path type"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-"path include path : udává cestu, ze které se vloží soubor.\n"
-"Viz File Inclusion.\n"
-"\tPříklad: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file : udává soubor obsahující\n"
-"předsdílené klíče pro různá ID. Viz Pre-shared key File.\n"
-"\tPříklad: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) bude hledat v tomto adresáři,\n"
-"po obdržení certifikátu nebo požadavku na certifikát.\n"
-"\tPříklad: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"lze vložit další soubory s nastavením.\n"
-"\tPříklad: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File : Soubor s předsdílenými klíči definuje dvojici\n"
-"identifikátoru a sdíleného tajného klíče, který se používá při ověřovací "
-"metodě\n"
-"Předsdílených klíčů ve fázi 1."
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "real file"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Ujistěte se, že se oddíly s cestami nacházejí\n"
-"na začátku souboru racoon.conf.\n"
-"\n"
-"Můžete nyní vybrat vzdálená nastavení.\n"
-"Pokračujte dále nebo se vraťte zpět, pokud jste hotovi.\n"
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Ujistěte se, že se oddíly s cestami nacházejí\n"
-"na začátku souboru %s.\n"
-"\n"
-"Můžete nyní vybrat nastavení sainfo.\n"
-"Pokračujte dále nebo se vraťte zpět, pokud jste hotovi.\n"
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-"Soubor %s má několik sekcí nebo spojení.\n"
-"\n"
-"Níže si ze seznamu vyberte tu, kterou chcete upravit a potom\n"
-"klepněte na Další.\n"
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Soubor %s má několik sekcí.\n"
-"\n"
-"\n"
-"Můžete nyní upravit položky pro remote sekci.\n"
-"\n"
-"Pokud jste hotovi, zvolte pokračovat.\n"
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-"Váš soubor %s má několik sekcí.\n"
-"\n"
-"Nyní můžete upravit položky oddílu sainfo.\n"
-"\n"
-"Pokud jste hotovi, bude následovat zápis dat."
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Tato sekce musí být uvedena v konfiguračním\n"
-"souboru %s nejdříve.\n"
-"\n"
-"Ujistěte se, že další sekce jsou uvedeny pod sekcí path.\n"
-"\n"
-"Nyní můžete upravit položky pro path.\n"
-"\n"
-"Vyberte pokračovat nebo zpět pokud jste hotovi.\n"
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "path_type"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-"Vše bylo nastaveno.\n"
-"\n"
-"Nyní můžete sdílet zdroje pomocí sítě Internet,\n"
-"bezpečně pomocí spojení VPN.\n"
-"\n"
-"Ujistěte se, že je nastaven oddíl s tunely\n"
-"shorewall."
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr "Zdrojová adresa sainfo"
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-"sainfo (zdrojove_id cilove_id | anonymous) { prikazy }\n"
-"definuje parametry IKE fáze 2\n"
-"(ustanovení IPsec-SA).\n"
-"\n"
-"zdrojove_id a cilove_id se tvoří následovně:\n"
-"\n"
-"\taddress adresa [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Příklady: \n"
-"\n"
-"sainfo anonymous (přijímá připojení odkudkoli)\n"
-"\tponechte tuto položku prázdnou pokud chcete anonymní přístup\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 je zdrojová adresa\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 je zdrojová adresa"
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr "Protokol zdrojů Sainfo"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-"sainfo (zdrojove_id cilove_id | anonymous) { prikazy }\n"
-"definuje parametry IKE fáze 2\n"
-"(ustanovení IPsec-SA).\n"
-"\n"
-"zdrojove_id a cilove_id se tvoří následovně:\n"
-"\n"
-"\taddress adresa [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Příklady: \n"
-"\n"
-"sainfo anonymous (přijímá připojení odkudkoli)\n"
-"\tponechte tuto položku prázdnou pokud chcete anonymní přístup\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tprvní \"any\" umožňuje jakýkoli protokol pro zdroj"
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr "Cílová adresa Sainfo"
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-"sainfo (zdrojove_id cilove_id | anonymous) { prikazy }\n"
-"definuje parametry IKE fáze 2\n"
-"(ustanovení IPsec-SA).\n"
-"\n"
-"zdrojove_id a cilove_id se tvoří následovně:\n"
-"\n"
-"\taddress adresa [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Příklady: \n"
-"\n"
-"sainfo anonymous (přijímá připojení odkudkoli)\n"
-"\tponechte tuto položku prázdnou pokud chcete anonymní přístup\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 je cílová adresa\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 je cílová adresa"
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr "Protokol cílů Sainfo"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-"sainfo (zdrojove_id cilove_id | anonymous) { prikazy }\n"
-"definuje parametry IKE fáze 2\n"
-"(ustanovení IPsec-SA).\n"
-"\n"
-"zdrojove_id a cilove_id se tvoří následovně:\n"
-"\n"
-"\taddress adresa [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Příklady: \n"
-"\n"
-"sainfo anonymous (přijímá připojení odkudkoli)\n"
-"\tponechte tuto položku prázdnou pokud chcete anonymní přístup\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tposlední \"any\" umožňuje jakýkoli protokol pro cíl"
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "PFS skupina"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-"Definujte skupinu Diffie-Hellmanova umocňování.\n"
-"Pokud nevyžadujete PFS, pak můžete tento příkaz vynechat.\n"
-"Pokud žádnou skupinu nezadáte, bude přijat jakýkoli návrh.\n"
-"Skupina je jedna z následujících: modp768, modp1024, modp1536.\n"
-"Lze také definovat 1, 2 nebo 5 jako číslo skupiny DH."
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "Doba trvání"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-"Definujte délku časového úseku, který bude navržen při\n"
-"vyjednávání ve fázi 1. Pokud žádnou délku nezadáte, bude\n"
-"přijat jakýkoli návrh, a protějšku nebude navržen žádný\n"
-"atribut či atributy. Tyto intervaly lze jednotlivě specifikovat\n"
-"během každého návrhu.\n"
-"\n"
-"Příklady:\n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"V těchto případech jsou čísla intervalů 1, 1, 30, 30, 60 a 12.\n"
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "Jednotka pro dobu trvání"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-"Definujte délku časového úseku, který bude navržen při\n"
-"vyjednávání ve fázi 1. Pokud žádnou délku nezadáte, bude\n"
-"přijat jakýkoli návrh, a protějšku nebude navržen žádný\n"
-"atribut či atributy. Tyto intervaly lze jednotlivě specifikovat\n"
-"během každého návrhu.\n"
-"\n"
-"Příklady:\n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"V těchto případech jsou jednotky intervalů 'min', 'min', 'sec', 'sec', 'sec' "
-"a 'hour'.\n"
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "Autentizační algoritmus"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "Kompresní algoritmus"
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr "deflate"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Remote"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-"remote (adresa | anonymous) [[port]] { prikaz }\n"
-"udává parametry pro IKE fáze 1 pro každý vzdálený uzel.\n"
-"Výchozí port je 500.  Pokud je zadán parametr \"anonymous\",\n"
-"vztahují se příkazy na všechny protějšky, které nesplňují žádný\n"
-"z ostatních příkazů remote.\n"
-"\n"
-"Příklady: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr "Režim výměny"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-"Definuje režim výměny pro fázi 1, kde iniciátorem je\n"
-"racoon. Představuje též přípustné režimy výměny dat,\n"
-"pokud je racoon odpovídajícím. Lze zadat více režimů,\n"
-"ty je pak třeba oddělit čárkami. Jsou přípustné všechny\n"
-"režimy. První z nich racoon použije, pokud je iniciátorem.\n"
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "Generovat politiku"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-"Tento příkaz je pro odpovídajícího. Chcete-li, aby racoon\n"
-"operoval v režimu odpovídání, měli byste nastavit parametr\n"
-"\"passive\". Pokud nemá odpovídající nastavenou žádnou politiku\n"
-"v SPD během vyjednávání ve fázi 2, a tento příkaz je zapnut,\n"
-"pak racoon(8) vybere první návrh z údajů SA poslaných iniciátorem,\n"
-"a vygeneruje položky politiky z návrhu. To je užitečné při jednání\n"
-"s klientem, který má IP adresu dynamicky přidělenou. Mějte\n"
-"na paměti, že takto může iniciátor odpovídajícímu poskytnout\n"
-"do SPD nesprávnou politiku. Pokud je tato politika chybná a jsou\n"
-"v ní nesrovnalosti mezi iniciátorem a odpovídajícím, může\n"
-"následná komunikace selhat. Tento příkaz se ignoruje v případě\n"
-"iniciátora. Výchozí nastavení je vypnuto."
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "Pasivní"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-"Pokud nechcete inicializovat spojení, nastavte tento\n"
-"příkaz na zapnuto. Výchozí nastavení je vypnuto. Tento\n"
-"příkaz je užitečný pro server."
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "Typ certifikátu"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "Můj soubor s certifikáty"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "Název certifikátu"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "Můj privátní klíč"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "Název privátního klíče"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr "Soubor s certifikátory protějšků"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr "Název certifikátu protějšků"
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "Ověřovat certifikát"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-"Pokud z nějakého důvodu nechcete ověřovat certifikát\n"
-"protějšku, vypněte tuto volbu. Výchozí nastavení je zapnuto."
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "Můj identifikátor"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-"Udává identifikátor posílaný vzdálenému počítači\n"
-"a který typ použít při vyjednávání ve fázi 1. Jako idtype\n"
-"lze použít address, FQDN, user_fqdn, keyid a asn1dn.\n"
-"Lze je použít takto:\n"
-"\tmy_identifier address [address];\n"
-"\t\ttyp je IP adresa. Toto je výchozí typ,\n"
-"\t\tpokud nezadáte, který typ identifikátoru se má použít.\n"
-"\tmy_identifier user_fqdn řetězec;\n"
-"\t\ttyp je USER_FQDN (User Fully-Qualified\n"
-"\t\tDomain Name).\n"
-"\tmy_identifier FQDN řetězec;\n"
-"\t\ttyp je FQDN (Fully-Qualified Domain Name).\n"
-"\tmy_identifier keyid soubor;\n"
-"\t\ttyp je KEY_ID.\n"
-"\tmy_identifier asn1dn [řetězec];\n"
-"\t\ttyp je ASN.1 rozlišitelné jméno. Pokud\n"
-"\t\tje řetězec vynechán, racoon(8) získá DN z políčka\n"
-"\t\tSubject z certifikátu.\n"
-"\n"
-"Příklady:\n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr "Identifikátor protějšku"
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr "Návrh"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-"Udává šifrovací algoritmus použitý při vyjednávání\n"
-"ve fázi 1. Tento parametr musí být definován.\n"
-"Algoritmus může být jeden z následujících:\n"
-"\n"
-"DES, 3DES, blowfish, cast128 nebo oakley.\n"
-"\n"
-"Tento příkaz by se neměl používat pro jiné transformace."
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "Hašovací algoritmus"
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "Skupina DH"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Příkaz"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "Zdrojový rozsah IP adres"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "Cílový rozsah IP adres"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "Protokol vyšší vrstvy"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "any"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Příznak"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Směr"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "Politika pro IPsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "ipsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr "discard"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr "tunnel"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr "transport"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Zdroj/cíl"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr "require"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "výchozí"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "use"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "unique"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (cable-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japonsko (broadcast)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Japonsko (kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "Čína (broadcast)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Západní Evropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Východní Evropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Francie [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Nový Zéland"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australská kabelová televize Optus"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Zadejte prosím\n"
-"typ TV normy a zemi"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "Norma TV:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Oblast:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Probíhá vyhledávání TV kanálů ..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "Vyhledávám TV kanály"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Nastala chyba při zkoumání TV kanálů"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Přeji hezký den!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nyní můžete spustit aplikaci XawTV (pod X Windows!)\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Nebyla nalezena TV karta!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"V počítači nebyla nalezena žádná TV karta. Zkontrolujte prosím, zda "
-"podporovaná karta je správně zapojena.\n"
-"\n"
-"\n"
-"Databázi hardware lze nalézt na:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Alternativní ovladače"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "seznam alternativních ovladačů pro vaši zvukovou kartu"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"toto je fyzická sběrnice, na kterou je připojeno zařízení (např. PCI, "
-"USB, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Identifikace sběrnice"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- zařízení PCI a USB: vypisuje se dodavatel, zařízení, subdodavatel a "
-"podzařízení (ID PCI/USB)"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- zařízení PCI: udává slot PCI, zařízení a funkci této karty\n"
-"- zařízení EIDE: zařízení je buď master nebo slave\n"
-"- zařízení SCSI: udává ID sběrnice a zařízení SCSI"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "Kapacita zařízení"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"speciální schopnosti zařízení (schopnost vypalování a/nebo podpora DVD)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "Toto pole popisuje zařízení"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Starý soubor se zařízením"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "starý, statický název zařízení, který se používá v balíčku dev"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Nové zařízení devfs"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-"nový, dynamický název zařízení, který generuje zabudovaný systém jádra devfs"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Modul"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modul jádra systému GNU/Linux, který ovládá toto zařízení"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "Rozšířené oddíly"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "počet rozšířených oddílů"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Geometrie"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr "Plotny/hlavičky/sektory, geometrie disku"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "Řadič disku"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr "řadič disku na straně hostitele"
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "třída hardwarového zařízení"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Model"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "model pevného disku"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "port síťové tiskárny"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "Primární oddíly"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "počet primárních oddílů"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "jméno dodavatele zařízení"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "Sběrnice PCI #"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "sběrnice PCI, na kterou je připojeno zařízení"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "Zařízení PCI #"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "Číslo zařízení PCI"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr "Funkce PCI #"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr "Číslo funkce PCI"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "ID dodavatele"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr "standardní číselný identifikátor dodavatele"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "ID zařízení"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "toto je číselný identifikátor zařízení"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr "Sub ID dodavatele"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr "toto je druhotný číselný identifikátor dodavatele"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr "Sub ID zařízení"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "toto je druhotný číselný identifikátor zařízení"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "USB ID zařízení"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "BogoMIPS"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"GNU/Linux jádro potřebuje spustit výpočetní smyčku při spuštění pro "
-"inicializaci čítače hodin.  Výsledek je uložen v proměnné BogoMIPS jako "
-"takový \"benchmark\" pro cpu."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Velikost vyrovnávací paměti"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "Velikost cache (druhá úroveň) na cpu"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Chyba čárky"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Zda má cpu chybu čárky Cyrix 6x86"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Rodina CPU"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "Rodina pro cpu (např. 6 pro i686 třídu)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Cpuid úroveň"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "Úroveň informací, které lze získat po provedení instrukce cpuid"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvence (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"Frekvence CPU v MHz (Megahertz je hodnota přibližně rovna vypočtenému počtu "
-"instrukcí, které je schopen procesor provést za sekundu)"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Příznaky"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Příznaky CPU nalezené jádrem"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv chyba"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"První verze procesorů Pentium měly z výroby chybu v jednotce pro plovoucí "
-"řádovou čárku, která nedosahovala požadované přesnosti při operaci FDIV"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "Přítomnost FPU"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "ano znamená, že procesor má aritmetický koprocesor"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Zda má FPU irq vektor"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "ano znamená, že aritmetický koprocesor je vybaven vektorem výjimek"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "F00f chyba"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"První verze procesorů Pentium byly chybové a způsobovaly zatuhnutí při "
-"dekódování instrukce F00F"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "Halt chyba"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Některé první modely čipsetů i486DX100  neprováděly správně po instrukci "
-"\"halt\" návrat do operačního režimu"
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "Specifická třída cpu"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "Generace cpu (např. 8 pro Pentium III, ...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Název modelu"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "Oficiální jméno dodavatele procesoru"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "název CPU"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "ID procesoru"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "číslo procesoru"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Číslování modelu"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "Model cpu (generované číslo pro submodel)"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "jméno dodavatele procesoru"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Ochrana proti zápisu"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"příznak WP pro CR0 registr procesoru zabezpečuje ochranu před zápisem na "
-"úrovni paměti, takže jeho povolením dojde k prevenci nečekaným přístupům do "
-"paměti uživatelských aplikací (čili je to ochrana před chybou)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Formáty pro diskety"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "Druhy formátu disket podporované mechanikou"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Kanál EIDE/SCSI"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr "Identifikátor disku"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr "obvykle sériové číslo disku"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr "Logické číslo jednotky"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-"logické číslo zařízení SCSI (LUN). SCSI zařízení připojená k řadiči jsou "
-"jednoznačně\n"
-"identifikována číslem kanálu, ID cíle a logickým číslem zařízení"
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "Instalovaná velikost"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr "Instalovaná velikost paměťové banky"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr "Dostupná velikost"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr "Dostupná velikost paměťové banky"
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "typ paměťového zařízení"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Rychlost"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr "Rychlost paměťové banky"
-
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr "Propojení banky"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr "Umístění patice paměťové banky"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "Soubor se zařízením"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-"soubor se zařízením, který se používá při komunikaci s ovladačem jádra myši"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr "Emulované kolečko"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "zda-li je kolečko emulováno nebo ne"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "typ myši"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "název myši"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Počet tlačítek"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "počet tlačítek na myši"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "Typ sběrnice, ke které je připojena myš"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr "Protokol myši používaný X11"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr "protokol, který s myší používá grafické prostředí"
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Identifikace"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Připojení"
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr "Výkony"
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "Chyby"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr "FPU"
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Oddíly"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Vlastnosti"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Volby"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Nápověda"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Automaticky detekovat _tiskárny"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Automaticky detekovat _modemy"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Automaticky detekovat jednotky _Jaz"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr "/Automaticky detekovat jednotky _Zip na paralelním portu"
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr "/Poslat seznam _hardware"
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Konec"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Popis položek"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Nápověda pro HardDrake"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Pokud vyberete nějaké zařízení, uvidíte o něm informace v pravém rámci "
-"(\"Informace\")"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/Nah_lásit chybu"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_O aplikaci..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "O aplikaci HardDrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Toto je HardDrake, nástroj pro nastavení hardware %s.\n"
-"<span foreground=\"royalblue3\">Verze:</span> %s\n"
-"<span foreground=\"royalblue3\">Autor:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "HardDrake2"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Nalezený hardware"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Nastavit modul"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Spustit nástroj pro nastavení"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "neznámý"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Neznámý"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Ostatní"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"Klepněte na zařízení v levé části stromu a zobrazíte zde o něm informace."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "sekundární"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "primární"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "vypalovačka"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr "Poslat seznam hardware"
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Účet:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Heslo:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Jméno počítače:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Jaké je rozložení vaší klávesnice?"
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Chcete, aby se klávesa Backspace chovala v konzoli jako Delete?"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Změny jsou provedeny, ale pro aktivaci je nutné provést odhlášení"
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Záznamy nástrojů Mandriva Linuxu"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Zobrazit pouze pro vybraný den"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Soubor/_Nový"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Soubor/_Otevřít"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Soubor/_Uložit"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>U"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Soubor/Uložit _jako"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Soubor/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Volby/Test"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Nápověda/_O aplikaci..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Autentizace"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "Uživatel"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "Zprávy"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Syslog"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "vyhledat"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Nástroj na sledování logů"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Nastavení"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "Shodných"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "neshodných"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Vyberte soubor"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Kalendář"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Obsah souboru"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "Varovné zprávy e-mailem"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "Průvodce pro varování neočekávaně selhal:"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "čekejte prosím, zpracovávám soubor: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Server pro World Wide Web Apache"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Dekodér názvu domény"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "Server FTP"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Poštovní server Postfix"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Server Samba"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Služba Webmin"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Služba Xinetd"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "Nastaví odesílání varovných zpráv emailem"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "Zastavit zasílání varovných zpráv emailem"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Nastavení zasílání varovných zpráv e-mailem"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Vítejte v nastavení elektronické pošty.\n"
-"\n"
-"Zde lze nastavit systém posílání varovných zpráv.\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Co chcete dělat?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Nastavení služeb"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Pokud jedna z vybraných služeb nepoběží, obdržíte varovnou zprávu"
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "Nahrát volby"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Pokud bude hodnota vetší než zadané číslo, obdržíte varovnou zprávu"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Zatížení"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "Nastavení varování"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Zadejte prosím níže svou poštovní adresu "
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-"a zadejte název (nebo IP adresu) SMTP serveru, který budete chtít použít"
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "Průvodce úspěšně nastavil posílání varování elektronickou poštou."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "Průvodce úspěšně zakázal zasílání varovných zpráv emailem."
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Uložit jako..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Vyberte si typ vaši myši."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Emulovat třetí tlačítko?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Test myši"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Vyzkoušejte prosím, zda funguje myš:"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "Síť běží na rozhraní %s"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Síť na rozhraní %s neběží. Klikněte na \"Nastavit síť\""
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Připojit %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Odpojit %s"
-
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr "Sledovat síť"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Nastavit síť"
-
-#: standalone/net_applet:73
-#, c-format
-msgid "Watched interface"
-msgstr "Sledované rozhraní"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Profily"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "Získat online nápovědu"
-
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr "Interaktivní detekce průniku"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Vždy spouštět při startu"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr "Došlo k pokusu o útok skenováním portů z %s."
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "Služba %s je napadena ze strany %s."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr "Došlo k pokusu o útok prolomením hesla z %s."
-
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Aktivní firewall: detekován průnik"
-
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Chcete přidat útočníka na černou listinu?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr "Přidat na černou listinu navždy (už se nikdy neptat)"
-
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr "Podrobnosti útoku"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr "Čas útoku: %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Síťové rozhraní: %s"
-
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr "Typ útoku: %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protokol: %s"
-
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr "IP adresa útočníka: %s"
-
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr "Název počítače útočníka: %s"
-
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr "Napadená služba: %s"
-
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr "Napadený port: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr "Typ útoku ICMP: %s"
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Sledování sítě"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "Globální statistiky"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "Okamžitá"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Průměrná"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"Odchozí\n"
-"rychlost:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"Rychlost\n"
-"na příjmu:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"Doba\n"
-"připojení: "
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr "Použít stejnou stupnici pro příchozí i odchozí"
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Čekejte prosím, testuji připojení..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "Odpojení od Internetu "
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "Připojení k Internetu "
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Odpojení od Internetu selhalo."
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Odpojení od Internetu ukončeno."
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Připojení ukončeno."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Připojení selhalo.\n"
-"Ověřte nastavení v ovládacím centru Mandriva Linux."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Nastavení barev"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "odesláno: "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "přijato: "
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "průměr"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Lokální měřítko"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Varování, bylo detekováno jiné připojení k Internetu, zřejmě je použita síť"
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "Žádné připojení k internetu není nastaveno"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Načítám data z instalovaných tiskáren..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "Nástroj pro správu tiskáren %s"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Akce"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/Přid_at tiskárnu"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Nas_tavit jako výchozí"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/Ú_pravy"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/O_dstranit"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Expertní režim"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/O_bnovit"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/Na_stavit CUPS server"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Hledat:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Použít filtr"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "Vých."
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Název tiskárny"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Typ spojení"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Název serveru"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Přidat tiskárnu"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Přidá novou tiskárnu do systému"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Nastavit jako výchozí"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Nastaví vybranou tiskárnu jako výchozí"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Upravit vybranou tiskárnu"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Smazat vybranou tiskárnu"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Obnovit seznam"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "Nastavení serveru CUPS"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "Nastaví tiskového systém CUPS"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Přístupná"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Nepřístupná"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Autoři:"
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "Správa tiskáren %s"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"Pokud chcete používat skenery, musí být nainstalovány balíčky SANE.\n"
-"\n"
-"Chcete nainstalovat balíčky SANE?"
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Ukončuji Scannerdrake."
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-"Nelze nainstalovat balíčky potřebné pro nastavení skeneru pomocí "
-"Scannerdrake."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Scannerdrake nebude nyní spuštěn."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Vyhledávám nastavené skenery ...."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Vyhledávám nové skenery ..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "Znovu generuji seznam nastavených skenerů..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "Tato verze %s nepodporuje %s."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s nalezeno na %s, chcete ho nastavit automaticky?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s není v databázi skenerů, nastavit ručně?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Zvolte si model skeneru"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Nalezen model: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr " (NEPODPOROVÁN)"
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "%s není podporován systémem Linux."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "Neinstalovat soubor s firmware"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-"Je možné, že váš %s potřebuje nahrát svůj firmware pokaždé, když je zapnut."
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "V takovém případě můžete toto zautomatizovat."
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"Chcete-li tak učinit, musíte dodat soubor s firmware pro váš skener, aby jej "
-"bylo možné instalovat."
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"Tento soubor lze nalézt na CD nebo disketě, která je dodávána s vaším "
-"skenerem, nebo na webových stránkách výrobce, a případně na vašem oddílu s "
-"Windows."
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Instalovat firmware z"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Vyberte soubor s firmware"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "Soubor s firmware %s neexistuje nebo je nečitelný!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-"Je možné, že vaše skenery potřebují nahrát svůj firmware pokaždé, když jsou "
-"zapnuty."
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-"Chcete-li tak učinit, musíte dodat soubory s firmware pro vaše skenery, aby "
-"je bylo možné instalovat."
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-"Pokud jste již firmware vašeho skeneru instalovali, můžete zde firmware "
-"aktualizovat tím, že dodáte soubor s novější verzí firmware."
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "Instalovat firmware pro"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "Vyberte soubor s firmware pro %s"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Nelze instalovat soubor s firmware pro %s!"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "Soubor s firmware pro %s byl úspěšně nainstalován."
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "Skener %s není podporován"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"Skener %s musí být nastaven pomocí nástroje PrinterDrake.\n"
-"Spustit PrinterDrake lze z ovládacího centra %s v sekci Hardware."
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Automaticky detekovat dostupné porty"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Vyberte prosím zařízení, ke kterému je skener %s připojen"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Pozn: Paralelní porty nepoužívají autodetekci)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "vyberte zařízení"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Vyhledávám skenery..."
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "Nastavuji moduly jádra..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "Pozor!"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-"Váš %s nelze nastavit plně automaticky.\n"
-"\n"
-"Je zapotřebí ručních zásahů. Upravte prosím soubor s nastavením /etc/sane.d/%"
-"s.conf. "
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-"Více informací lze nalézt v manuálových stránkách k ovladači. Spusťte příkaz "
-"\"man sane-%s\" a přečtěte si je."
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Poté lze skenovat dokumenty pomocí aplikace \"XSane\" nebo \"Kooka\" z "
-"nabídky aplikací Multimédia/Grafika."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-"Váš %s byl nastaven, je však možné, že pro dosažení plné funkčnosti bude "
-"třeba dalších ručních zásahů. "
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-"Pokud se neobjeví v seznamu nastavených skenerů v hlavním okně nástroje "
-"Scannerdrake nebo pokud nepracuje správně, "
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "upravte soubor s nastavením /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"Váš %s byl nastaven.\n"
-"Nyní lze skenovat dokumenty pomocí aplikace \"XSane\" nebo \"Kooka\" z "
-"nabídky aplikací Multimédia/Grafika."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"V tomto počítači jsou dostupné skenery\n"
-"\n"
-"%s\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"V tomto počítači je dostupný skener\n"
-"\n"
-"%s\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Na vašem počítači nebyly nalezeny žádné připojené skenery.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Vyhledání nový skenerů"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Přidat skener ručně"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Instalovat/Aktualizovat soubory s firmware"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Sdílení skeneru"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Všechny vzdálené počítače"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Tento počítač"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Zde můžete nastavit, zda skenery, co jsou připojeny k tomuto počítači, mohou "
-"být vzdáleně přístupné a také přesně z jakých počítačů."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Zde můžete rozhodnout o tom, zda vzdáleně přístupné skenery budou využitelné "
-"i na tomto počítači."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skenery na tomto počítači jsou přístupné i pro vzdálené počítače"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Sdílet skener pro počítače: "
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Použít skenery na vzdáleném počítači"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Použít skenery na počítači: "
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Sdílení lokálních skenerů"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-"Zde je seznam počítačů, na kterých jsou přístupné lokálně připojené skenery: "
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Přidat počítač"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Upravit vybraný počítač"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Odstranit vybraný počítač"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Název/IP adresa počítače:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Zvolte počítač, na kterém budou přístupné lokální skenery:"
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Musíte zadat název počítače nebo IP adresu.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Tento počítač je již na seznamu, nelze jej tedy přidat dvakrát.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Použití vzdálených skenerů"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Zde je seznam počítačů, ze kterých je možné využít skenery: "
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"Chcete-li sdílet lokální skenery, musíte nainstalovat balíček saned.\n"
-"\n"
-"Chcete nainstalovat balíček saned?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "Váš skener(y) nebude přístupný na síti."
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Některá zařízení v třídě hardware \"%s\" byla odstraněna:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr "- %s bylo odstraněno\n"
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Některá zařízení byla přidána: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- %s bylo přidáno\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Probíhá detekce hardware"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr "Změny v hardware ve třídě \"%s\" (%s sekund pro odpověď)"
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Chcete spustit odpovídající nástroj pro nastavení?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Výběr jazyka"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Licence"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Nastavení myši"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Detekce pevných disků"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Volba typu instalace"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Výběr klávesnice"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Rozdělení disku"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Formátování oddílů"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Výběr balíčků pro instalaci"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Instalace systému"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "Heslo správce systému"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Přidání uživatele"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Nastavení sítí"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Zaváděcí program"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Nastavení X"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Nastavení služeb"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Aktualizace systému"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Ukončení instalace"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Je to správně?"
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "Nezvolen žádný soubor"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Vybrali jste soubor, ne adresář"
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Vybrali jste adresář, ne soubor"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "Adresář neexistuje"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "Soubor neexistuje"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Rozbalit větev"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Sbalit větev"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Přepnutí mezi abecedním a skupinovým řazením"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s není instalováno\n"
-"Klikněte na \"Další\" chcete-li provést instalaci nebo \"Zrušit\", pokud "
-"nechcete."
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Instalace selhala"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "Počet logických extentů: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Váš systém má málo systémových prostředků. Při instalaci Mandriva Linuxu "
-#~ "se\n"
-#~ "můžete setkat s různými problémy. Pokud se tak stane, zkuste textovou\n"
-#~ "verzi instalačního programu. Ta se spouští tak, že při startu\n"
-#~ "z CD mechaniky stisknete 'F1' a poté napíšete 'text'."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Kontaktuji web Mandriva Linux pro získání seznamu dostupných zrcadel..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Mandriva Linux Instalace %s"
-
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "VAROVÁNÍ: Toto zařízení již bylo nastaveno pro připojení k Internetu.\n"
-#~ "Úprava níže uvedených položek přepíše toto nastavení.\n"
-#~ "Chcete opravdu přenastavit toto zařízení?"
-
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - Vytvoření diskety a CD etherboot:\n"
-#~ "        \tBezdiskové klientské počítače potřebují buď obrazy ROM na NIC, "
-#~ "nebo zaváděcí disketu\n"
-#~ "        \tnebo CD, aby mohly spustit zaváděcí sekvenci. DrakTermServ "
-#~ "pomůže tyto zaváděcí obrazy generovat,\n"
-#~ "        \tv závislosti na NIC na klientském stroji.\n"
-#~ "        \t\t\n"
-#~ "        \tZákladní příklad ručního vytvoření zaváděcího obrazu diskety "
-#~ "pro kartu 3Com 3c509:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Dynamický rozsah IP adres:"
-
-#~ msgid "hd"
-#~ msgstr "disk"
-
-#~ msgid "tape"
-#~ msgstr "páska"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "Vzdálená místo je již protokolem WebDAV synchronizováno!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "Přenos protokolem WebDAV selhal!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr ""
-#~ "Překročena kvóta pro zálohu!\n"
-#~ "Je použito %d MB oproti %d MB alokovaným."
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Maximální velikost\n"
-#~ " povolená pro DrakBackup (MB)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-Sítí přes WebDAV.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Použít spouštění v grafice"
-
-#~ msgid "first step creation"
-#~ msgstr "první krok při vytváření"
-
-#~ msgid "choose image file"
-#~ msgstr "vyberte soubor s obrazem"
-
-#~ msgid "Browse"
-#~ msgstr "Procházet"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Nastavit obrázek pro bootsplash"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "barva lišty s průběhem"
-
-#~ msgid "Preview"
-#~ msgstr "Náhled"
-
-#~ msgid "Choose color"
-#~ msgstr "Výběr barvy"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "Nevypisování hlášek jádra nastavit jako výchozí"
-
-#~ msgid "Notice"
-#~ msgstr "Poznámka"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "Tento motiv nemá ještě žádný bootsplash v %s !"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Nejprve musíte vybrat soubor s obrazem!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Generuji náhled ..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "Náhled tématu Bootsplash %s (%s)"
-
-#~ msgid ""
-#~ "The image \"%s\" cannot be load due to the following issue:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-#~ msgstr ""
-#~ "Obrázek \"%s\" nelze načíst díky následující chybě:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Není dostupná žádná disketová mechanika"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Vložte prosím disketu s moduly do %s"
-
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Tifinaghské (+latinka/arabské)"
-
-#~ msgid "No network card"
-#~ msgstr "Žádná síťová karta"
-
-#~ msgid ""
-#~ "The following protocols can be used to configure an ethernet connection. "
-#~ "Please choose the one you want to use"
-#~ msgstr ""
-#~ "Následující protokoly lze použít pro nastavení Ethernetového připojení. "
-#~ "Vyberte prosím ten, který chcete použít"
-
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "Použít již nainstalovaný ovladač (%s)"
-
-#~ msgid "Use Wi-Fi Protected Access (WPA)"
-#~ msgstr "Použít chráněný přístup k Wi-Fi (WPA)"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "Nevybrali jste žádné písmo"
-
-#~ msgid "Save and close"
-#~ msgstr "Uložit a zavřít"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
deleted file mode 100644
index 129d7ac86..000000000
--- a/perl-install/share/po/cy.po
+++ /dev/null
@@ -1,26997 +0,0 @@
-# translation of DrakX-cy.po to Cymraeg
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# Rhoslyn Prys <rhoslyn.prys@ntlworld.com>, 2003,2004,2005.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Mandriva DrakX.cy\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-04-25 09:07-0000\n"
-"Last-Translator: Rhoslyn Prys <post@meddal.com>\n"
-"Language-Team: Cymraeg <post@meddal.com>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=utf-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Poedit-Language: Welsh\n"
-"X-Poedit-Country: UNITED KINGDOM\n"
-"X-Poedit-SourceCharset: utf-8\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Pa allwedd USB hoffech ei fformatio?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-"Rydych ar fin fformatio dyfais USB \"%s\". Bydd hyn yn dileu'r holl ddata "
-"sydd \n"
-"arno. Gwnewch yn siŵr fod mai hwn yw'r allwedd USB rydych am ei fformatio.\n"
-"Rydym yn eich cynghori i dynnu'r holl ddyfeisiadau storio USB eraill wrth "
-"wneud hyn. "
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "Nid yw'r allwedd yn ysgrifennadwy"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-"Mae'r allwedd USB i weld a'i ddiogelu rhag ysgrifennu ymlaen.\n"
-"Tynnwch yr allwedd, diffodd y diogelu, ai ailosod."
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Ceisio eto"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "Parhau heb allwedd USB"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-"Mae'r allwedd USB i weld a'i ddiogelu rhag ysgrifennu ymlaen, ond nid oes.\n"
-"modd ei dynnu'n ddiogel.\n"
-"\n"
-"\n"
-"Cliciwch y botwm i ailgychwyn y peiriant, tynnwch yr allwedd, diffodd y\n"
-"diogelu, ailosod y plwg a chychwyn Mandriva Move eto."
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Ailgychwyn"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Does gan eich allwedd USB raniadau Windows (FAT) dilys\n"
-"Rhaid cael un i barhau (mae'n fwy safonol i'ch caniatáu i\n"
-"chi symud a chael mynediad i ffeiliau o beiriannau sy'n rhedeg\n"
-"Windows). Rhowch allwedd USB yn cynnwys rhaniad Windows\n"
-"yn ei le nawr.\n"
-"\n"
-"\n"
-"Mae modd mynd yn eich blaen heb allwedd USB - bydd dal\n"
-"modd i chi ddefnyddio Mandriva Move fel System Weithredu\n"
-"Mandriva hyfyw."
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Nid ydym wedi canfod allwedd USB ar eich system Os wnewch\n"
-"rhoi'r allwedd USB yn ei le, mae gan Mandriva Move y gallu i\n"
-"gadw eich data yn eich cyfeiriadur cartref a ffurfweddiad system\n"
-"gyfan, ar gyfer ail gychwyn y cyfrifiadur hwn neu un arall\n"
-"Sylwch: os wnewch chi roi'r allwedd yn ei le nawr, arhoswch\n"
-"eiliadau cyn canfod eto.\n"
-"\n"
-"\n"
-"Mae modd mynd yn eich blaen heb allwedd USB - bydd dal\n"
-"modd i chi ddefnyddio Mandriva Move fel system weithredu\n"
-"Mandriva hyfyw."
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "Mae angen allwedd i gadw eich data"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "Canfod allwedd USB eto"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "Gosod allwedd USB"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "Arhoswch, gosod ffeiliau caniatáu'r system ar allwedd USB..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-"Rhowch eich gwybodaeth bersonol, bydd y cyfrinair yn cael ei ddefnyddio ar "
-"gyfer yr arbedwr sgrin"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Awto ffurfweddiad "
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Arhoswch, canfod a ffurfweddu dyfeisiau..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Gwall"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Digwyddodd gwall ond wn i ddim sut i ddelio ag ef yn dwt.\n"
-"Mae'n beryglus i barhau."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Digwyddodd gwall"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-"Digwyddodd gwall:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"Gall hyn fod wedi dod o ffeiliau ffurfweddu'r system\n"
-"ar yr allwedd USB, yn yr achos yma bydd eu tynnu ac\n"
-"ailgychwyn Mandriva Move yn datrys y broblem. I wneud\n"
-"hynny, cliciwch y botwm perthnasol.\n"
-"\n"
-"\n"
-"Efallai byddwch am ailgychwyn a thynnu'r allwedd USB,\n"
-"archwilio ei gynnwys o dan system weithredu arall, neu gael\n"
-"golwg ar ffeiliau cofnod yng nghonsol #3 a #4 i geisio\n"
-"dyfalu beth sy'n digwydd."
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "Tynnu ffeiliau ffurfweddu'r system"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "Ailgychwyn"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "Dim ond heb gefnogaeth CD-ROM mae modd rhedeg"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Lladd y rhaglenni hyn"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "Dim cefnogaeth CD-ROM"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Darllenwch yn ofalus!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"Methu defnyddio CD-ROM pan fo'r rhaglenni canlynol yn rhedeg:\n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "Copïo i'r cof i gael tynnu'r CD-ROM"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "16 MB neu fwy"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "Gweinydd X"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Dewiswch weinydd X"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr " ffurfweddiad amlben"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Mae eich system yn cynnal ffurfweddiad amlben.\n"
-"Beth hoffech ei wneud?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Methu gosod pecyn Xorg: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Dewiswch faint cof eich cerdyn graffeg"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Ffurfweddiad Xorg"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Pa ffurfweddiad Xorg hoffech ei gael?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Ffurfweddu pob pen yn annibynnol"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Defnyddiwch estyniad Xinerama"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Ffurfweddu cerdyn \"%s\" %s yn unig"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg: %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s gyda chyflymu caledwedd 3D"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda Xorg %s"
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s gyda chyflymu caledwedd 3D ARBROFOL"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Mae modd i'ch cerdyn gael cefnogaeth cyflymu caledwedd 3D gyda Xorg %s \n"
-"SYLWER CEFNOGAETH ARBROFOL YW HON AC FE ALL RHEWI EICH CYFRIFIADUR."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Arddull"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Gadael"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Cerdyn Graffeg"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Cydraniad"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Prawf"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Dewisiadau"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr "Mae eich ffeil ffurfweddu Xorg wedi torri, byddwn yn ei anwybyddu."
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Cadw'r newid?\n"
-"Y ffurfweddiad presennol yw:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Dewiswch fonitor ar gyfer #%d"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Dewiswch fonitor"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Generig"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Gwerthwr"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Methodd ymholiad Plug'n Play. Dewiswch y dangosydd cywir"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Y ddau baramedr pwysig yw'r raddfa adnewyddu fertigol, sef y raddfa mae'r\n"
-"holl sgrin yn cael ei adnewyddu, ac yn fwyaf pwysig y raddfa cydamseru\n"
-"llorweddol, sef y raddfa mae'r llinellau sganio'n cael eu dangos.\n"
-"\n"
-"Mae'n BWYSIG IAWN nad ydych yn enwi monitor gyda graddfa cydamseru\n"
-"sydd tu hwnt i allu eich monitor: mae modd difrodi eich monitor drwy wneud "
-"hynny.\n"
-"Os oes gennych amheuaeth, dewiswch raddfa is."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Graddfa adfywio lorweddol"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Graddfa adfywio fertigol"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 lliw (8 did)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil o liwiau (15 did)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil o liwiau (16 did)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 miliwn o liwiau (24 did)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Cyfraniadau"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Arall"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Dewiswch y cydraniad a'r dyfnder lliw"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Cerdyn graffeg: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "Iawn"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Diddymu"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Cymorth"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Prawf o'r ffurfweddiad"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Ydych chi eisiau profi'r ffurfweddiad?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Rhybudd: gall profi'r cerdyn graffeg hwn rewi eich cyfrifiadur"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Digwyddodd gwall:\n"
-"%s\n"
-"Ceisiwch newid paramedrau"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Gadael mewn %d eiliad"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "A'i hwn yw'r gosodiad cywir?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Cynllun allweddell: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Math o lygoden: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Dyfais  llygoden: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "HorizSync Monitor: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "VertRefresh Monitor: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Cerdyn graffeg: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Cof graffeg: %s kB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Dyfnder lliw: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Cydraniad: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Gyrrwr Xorg: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Rhyngwyneb graffigol wrth gychwyn"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Hoffwn osod eich cyfrifiadur i gychwyn X yn awtomatig ar ôl cychwyn\n"
-"Hoffech chi i Xorg ddechrau wedi i chi ail-gychwyn?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Mae'n edrych fel bod gan eich cerdyn graffig gyswllt TV-OUT.\n"
-"Mae modd ei ffurfweddu i weithio drwy fyffer ffrâm.\n"
-"\n"
-"Rhaid cysylltu eich cerdyn graffig â'ch teledu cyn cychwyn eich "
-"cyfrifiadur.\n"
-"Dewiswch  \"TV-OUT\" yn y cychwynnwr\n"
-"\n"
-"Ydy'r nodwedd hon gennych?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Pa norm mae eich teledu'n ei ddefnyddio?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr "arall"
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Arhoswch"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Wrthi'n gosod cychwynnwr"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-"Mae LILO eisiau neilltuo enw Cyfrol newydd i yrrwr %s.  Er hynny, mae newid\n"
-"enw Cyfrol disg cychwyn Windows NT, 2000, neu XP yn wall angheuol.\n"
-"Nid yw'r rhybudd hwn yn cynnwys 95, 98, neu i ddisgiau data NT.\n"
-"\n"
-"Neilltuo enw Cyfrol newydd?"
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Methodd gosod cychwynnwr. Digwyddodd y gwall canlynol:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Efallai bydd angen i chi newid eich dyfais cychwyn Open Firmware\n"
-" i alluogi'r cychwynnwr. Os nad ydych yn gweld anogwr y\n"
-" cychwynnwr wrth ail gychwyn, gwasgwch Command-Option-O-F wrth ail\n"
-" gychwyn a theipiwch: setenv boot-device %s,\\\\:tbxi\n"
-" Yna teipiwch: shut-down\n"
-"Wrth gychwyn eto dylech weld anogwr y cychwynnwr."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Rydych wedi penderfynu gosod y cychwynnwr ar raniad.\n"
-"Mae hyn yn awgrymu bod gennych gychwynnwr ar ddisg caled eisoes: (ee System "
-"Commander).\n"
-"\n"
-"Gyda pha ddisg ydych chi'n cychwyn?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Adran gyntaf o'r disg (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Adran gyntaf o'r rhaniad gwraidd"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Ar Ddisg Meddal"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Hepgor"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "Gosodiad LILO/grub"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Lle rydych chi eisiau gosod y cychwynnwr?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Ffurfweddu'r Math o Gychwyn"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Prif ddewisiadau Bootloader"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Rhowch faint RAM mewn MB"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Dewis Nid yw 'cyfyngu dewisiadau llinell orchymyn' o werth heb gyfrinair"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Nid yw'r cyfrineiriau'n cyd-fynd"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Ceisiwch eto"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Bootloader ar waith"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Dyfais cychwyn"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Oedi cyn cychwyn y ddelwedd rhagosodedig"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Galluogi ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "Gorfodi dim APIC"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "Peidio Gorfodi APIC Lleol"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Cyfrinair"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Cyfrinair (eto)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Cyfyngu dewisiadau llinell orchymyn"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "cyfyngu"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Glanhau /tmp bob tro fyddwch yn cychwyn"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Union faint o RAM os oes angen (canfod %dMB)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Neges Init"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Agor Oedi Cadarnwedd"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Goramser cychwyn y cnewyllyn"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Galluogi cychwyn o CD?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Galluogi Cychwyn OF?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "System Weithredu Rhagosodedig?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Delwedd"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Gwraidd"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Atodi"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Modd fideo"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "Proffil rhwydwaith"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Label"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Rhagosodedig"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Maint intrd"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Nid yw label wag yn cael ei chaniatáu"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Rhaid enwi delwedd cnewyllyn"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Rhaid pennu rhaniad gwraidd"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Mae'r label hwn yn cael ei ddefnyddio eisoes"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Pa fath o gofnod ydych chi eisiau ei ychwanegu?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Systemau Gweithredu eraill (SunOS..)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Systemau Gweithredu Eraill (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Systemau Gweithredu Eraill (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Dyma'r cofnodion gwahanol ar eich dewislen cychwyn hyd yma.\n"
-"Mae modd i chi ychwanegu rhagor neu newid y rhai presennol."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "mynediad i raglenni  X"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "mynediad i offer rpm"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "caniatáu \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "mynediad i ffeiliau gweinyddol"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "mynediad i offer rhwydwaith"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "mynediad i offer crynhoad"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(wedi ychwanegu %s yn barod)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Mae'r cyfrinair yn rhy syml"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Rhowch enw defnyddiwr"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Rhaid i'r enw defnyddiwr gynnwys dim ond llythrennau bach, rhifau, '-' a '_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Mae'r enw defnyddiwr yn rhy hir"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Mae'r enw defnyddiwr wedi ei ychwanegu yn barod"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Ychwanegu defnyddiwr"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Rhowch enw defnyddiwr\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Gorffen"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Derbyn defnyddiwr"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Enw cywir"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Enw mewngofnodi"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Cragen"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Eicon"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Awto mewngofnodi"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mewngofnodi'n awtomatig ar gyfer un defnyddiwr."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Ydych chi eisiau defnyddio'r nodwedd?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Iawn"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Na"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Dewis y defnyddiwr rhagosodedig:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Dewiswch y rheolwr ffenestr i redeg:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Dewiswch iaith i'w defnyddio."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "Dewis iaith"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Gallwch ddewis ieithoedd eraill fydd ar gael ar ôl gosod. Dewiswch\n"
-"pa iaith yr hoffech ei osod. Byddant ar gael pan fydd eich gosodiad\n"
-"wedi ei gwblhau a phan fyddwch yn ailgychwyn eich system."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Defnyddio Unicode drwy ragosodiad"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Pob iaith"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Gwlad / Ardal"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Dewiswch eich gwlad."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Dyma restr lawn o'r gwledydd sydd ar gael"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "Gwledydd eraill"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Uwch"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "Dull mewnbwn:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Dim"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Peidio rhannu"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Caniatáu pob defnyddiwr"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Hoffech chi ganiatáu i rai defnyddwyr rannu eu cyfeiriaduron?\n"
-"Bydd caniatáu hyn yn gadael i ddefnyddwyr glicio ar \"Rhannu\" yn konqueror "
-"a nautilus.\n"
-"\n"
-"\"Addasu\" caniatáu cyfran i'r defnyddwyr.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-"NFS: system rhannu ffeiliau traddodiadol Unix, sydd â llai o gefnogaeth ar "
-"Mac a Windows."
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-"SMB: system rhannu ffeiliau sy'n cael ei ddefnyddio yn Windows, Mac OSX a "
-"nifer o systemau Linux diweddar."
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-"Gallwch allforio gan ddefnyddio NFS neu SMB. Pa un hoffech chi ei ddefnyddio?"
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Cychwyn userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Cau"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Mae'r rhannu yn ôl defnyddiwr yn defnyddio grŵp \"rhannu ffeiliau\" .\n"
-"Mae modd defnyddio userdrake i ychwanegu defnyddiwr i'r grŵp. "
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Ffeil leol"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr "Cerdyn clyfar"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Parth Windows"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr "Cyfeiriadur byw gyda SFU"
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr "Cyfeiriadur Byw gyda Winbind"
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "Ffeil leol:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr "Defnyddio lleol ar gyfer pob dilysiad a gwybodaeth mewn ffeil leol"
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-"Dweud wrth eich cyfrifiadur i ddefnyddio LDAP ar gyfer rhai neu'r holl "
-"ddilysiad. Mae LDAP yn crynhoi mathau arbennig o wybodaeth o fewn eich corff."
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-"Caniatáu i chi redeg grŵp o gyfrifiaduron yn yr un parth Gwasanaeth "
-"Gwybodaeth Rhwydwaith gyda chyfrinair cyffredin a ffeil grŵp."
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Parth Windows:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-"Mae Winbind yn caniatáu i'r system estyn gwybodaeth a dilysu defnyddwyr mewn "
-"parth Windows."
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr "Cyfeiriadur Byw gyda SFU:"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-"Mae Kerberos yn system ddiogel ar gyfer darparu gwasanaethau dilysu "
-"rhwydwaith."
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Cyfeiriadur Byw gyda Winbind:"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Dilysu LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "Sail dn LDAP"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "Gweinydd LDAP"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "syml"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr "trefn diogelwch (SASL/Kerberos)"
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr "Cyfeiriadur Byw Dilysu"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Parth"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Gweinydd"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "Cronfa ddata defnyddwyr LDAP"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr "Defnydd BIND anhysbys"
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr "Defnyddiwr LDAP â chaniatâd i bori'r Cyfeiriadur Gweithredol"
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr "Cyfrinair ar gyfer defnyddwyr"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Amgryptiad"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Dilysu LDAP"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "Parth NIS"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "Gweinydd NIS"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"I hyn weithio gyda 2WK PDC, bydd angen i chi gael y gweinyddwr i redeg C:"
-"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add ac "
-"ailgychwyn y gweinydd. Bydd angen hefyd yr enw defnyddiwr/cyfrinair "
-"Gweinyddiaeth Parth i uno'r peiriant â pharth Windows (NM).\n"
-"Os nad yw'r rhwydwaith wedi ei alluogi eto, bydd DrakX yn ceisio ymuno â'r "
-"parth ar ôl y cam o gychwyn y rhwydwaith.\n"
-"Os bydd y cam hwn yn methu am ryw reswm ac nid yw dilysiad yn gweithio, "
-"rhedwch 'smbpasswd -j DOMAIN -U USER%%PASSWORD' gan ddefnyddio eich Parth "
-"Windows(NM), a'ch Enw Defnyddiwr Gweinyddol/Cyfrinair ar ôl cychwyn eich "
-"system.\n"
-"Bydd y gorchymyn 'wbinfo -t' yn gwirio a yw eich cyfrinachau dilysu'n addas."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Dilysu Parth Windows"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Enw Defnyddiwr Gweinyddiaeth Parth"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Cyfrinair Gweinyddol y Parth"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr "Defnyddio Idmap i storio UID/SID "
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr "Idmap rhagosodedig"
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr "Gosod cyfrinair gweinyddwr (root) gwraidd a dulliau dilysu rhwydwaith"
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr "Gosod cyfrinair gweinyddwr (root"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Dull dilysu"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Dim cyfrinair"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Mae'r cyfrinair yn rhy syml ( rhaid iddo fod o leiaf %d nod o hyd)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Dilysu"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "Methu defnyddio darlledu heb barth NIS"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Croeso i'r dewis o systemau gweithredu! \n"
-"\n"
-"Dewiswch system weithredu o'r rhestr uchod neu\n"
-"aros am y cychwyn rhagosodedig\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "Lilo gyda dewislen raffigol"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO gyda dewislen testun"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "dim digon o le yn /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Nid oes modd gosod y cychwynnwr ar raniad %s\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-"Rhaid i ffurfweddiad eich cychwynnwr gael ei ddiweddaru am i'r rhaniadau "
-"gael eu hail rifo."
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"Methu gosod eich cychwynnwr yn iawn, Rhaid defnyddio achub cychwyn a dewis "
-"\"%s\""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "Ail osod Cychwynnwr"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d munud"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 munud"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d eiliad"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu ar goll"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper ar goll"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Awstria"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Awstralia"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Gwlad Belg"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brasil"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Canada"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Y Swistir"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Gweriniaeth Tsiec"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Yr Almaen"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Denmarc"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estonia"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Sbaen"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Y Ffindir"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Ffrainc"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Groeg"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Hwngari"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Iwerddon"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Israel"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Yr Eidal"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Siapan"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Yr Iseldiroedd"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Norwy"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Seland Newydd"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Gwlad Pwyl"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portiwgal"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rwsia"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Sweden"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slofacia"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Gwlad Thail"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "De Affrica"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Yr Unol Daleithiau"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"Protocol yw WebDAV sy'n eich caniatáu i chi osod gweinydd gwe'n lleol\n"
-"a'i drin fel system ffeilio leol ( ar yr amod bod y gweinydd lleol wedi ei\n"
-"ffurfweddi fel gweinydd WebDAV). Os hoffech ychwanegu pwyntiau\n"
-"gosod WebDAV, dewiswch \"Newydd\""
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Newydd"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Dadosod"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Gosod"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Pwynt gosod"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Rhowch URL gweinydd WebDAV"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Rhaid i'r URL gychwyn gyda http:// neu https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Gweinydd:"
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Pwynt gosod:"
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Dewisiadau: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Gwnewch gopi wrth gefn o'ch data yn gyntaf"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Os ydych yn bwriadu defnyddio aboot, gofalwch adael lle gwag (2048 sector yn "
-"ddigon)\n"
-"ar ddechrau'r ddisg."
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Dewin"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Dewiswch weithred"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Mae gennych un rhaniad Microsoft Windows mawr\n"
-"Awgrymir eich bod yn newid maint y rhaniad\n"
-"(cliciwch arno, ac yna clicio \"Newid maint\"]"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Cliciwch ar raniad"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Manylion"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Heb ganfod gyrwyr caled"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "FS jwrnaleiddiwyd"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Gwag"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Mathau o system ffeiliau:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Defnyddiwch \"%s\" yn lle hynny"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Creu"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Math"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Dileu"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Defnyddiwch \"Dadosod\" yn gyntaf"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Dewiswch raniad arall"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Dewiswch raniad"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Gadael"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Dadwneud"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Arbenigwr > Cyffredinol"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Cyffredinol > Arbenigwr"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Parhau beth bynnag?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-"Dylech fformatio rhaniad %s.\n"
-"Fel arall ni fydd mynediad i bwynt gosod %s yn cael ei ysgrifennu yn fstab.\n"
-"Gadael beth bynnag?"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Gorffen heb gadw"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Gorffen heb ysgrifennu'r tabl rhaniadau?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ydych eisiau cadw newidiadau /etc/fstab"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bydd angen i chi ail gychwyn cyn i'r newidiadau yn eich tabl rhaniad ddigwydd"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Clirio i gyd"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Awto ddynodi"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Rhagor"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Gwybodaeth am y ddisg galed"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Mae pob rhaniad cynradd wedi ei ddefnyddio"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Does dim modd ychwanegu rhaniadau ychwanegol"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "I gael mwy o raniadau, dilëwch un i greu rhaniad estynedig"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr "Dim uwchosod"
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr "Uwchosod"
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr "Uwchosod heblaw am yrrwyr CDROM"
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Cadw'r tabl rhaniad"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Adfer y tabl rhaniad"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Achub y tabl rhaniadau"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Ail-lwytho'r tabl rhaniad"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Cyfrwng symudadwy'n awto-osod"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Dewiswch ffeil"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Nid yw'r tabl rhaniad wrth gefn yr un maint\n"
-"Parhau?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Yn ceisio achub y tabl rhaniadau"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Gwybodaeth fanwl"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Newid maint"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Fformatio"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Ychwanegu i RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Ychwanegu i LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Tynnu o RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Tynnu o LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Newid RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Defnyddiwch ar gyfer cylchol"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Creu rhaniad newydd"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Sector dechreuol: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Maint mewn MB: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Math o system ffeilio"
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Dewis"
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Enw cyfrol resymegol"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"Nid oes modd i chi greu rhaniad newydd\n"
-"(gan eich bod wedi cyrraedd y nifer uchaf o raniadau cynradd).\n"
-"Diddymwch raniad cynradd a chreu rhaniad estynedig."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Tynnu'r ffeil gylchol?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Wedi newid math raniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Newid math y rhaniad"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Pa fath o system ffeil  ydych chi eisiau?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Newid o ext2 i ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Lle'r hoffech chi osod y ffeil gylchol %s?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Lle'r ydych am osod dyfais %s?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Methu dadsetio'r pwynt gosod gan fod y rhaniad yn cael ei ddefnyddio ar "
-"gyfer cylch-ôl\n"
-"Tynnu'r cylch-ôl yn gyntaf"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Lle'r ydych am osod %s?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Newid maint"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Cyfrifo ffiniau system ffeiliau FAT"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Nid oes modd newid maint y rhaniad"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Dylai'r holl ddata ar y rhaniad gael ei gadw wrth gefn"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Ar ôl newid maint rhaniad %s, bydd yr holl ddata ar y rhaniad yma yn cael ei "
-"golli"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Dewiswch y maint newydd"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Maint mewn MB: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"I sicrhau cywirdeb data'r rhaniad ar ôl ail-feintioli’r rhaniad(au), bydd \n"
-"gwiriadau'r system ffeiliau'n cael eu gwneud wrth i chi ail gychwyn Windows "
-"(TM)"
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Dewis RAID presennol i ychwanegu ato"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "newydd"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Dewis LVM presennol i ychwanegu ato"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "Enw LVM"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Nid oes modd defnyddio'r rhaniad ar gyfer cylchol"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Cylch-ôl"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Enw ffeil gylchol"
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Rhowch enw ffeil"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-"Mae'r ffeil yn cael ei ddefnyddio eisoes gam cylchol arall, dewiswch un arall"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Mae'r ffeil yn bodoli eisoes. Defnyddiwch hwn?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Dewisiadau gosod"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Amrywiol"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "dyfais"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "lefel"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "Maint darn yn KiB"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Byddwch ofalus: mae'r weithred hon yn beryglus."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Pa fath o raniad ?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Mi fydd angen i chi ailgychwyn cyn i'r newidiadau ddod i rym"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Mae tabl rhaniad disg %s yn mynd i gael ei ysgrifennu i'r ddisg!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Wedi fformatio rhaniad %s, bydd yr holl ddata ar y rhaniad yn cael ei golli"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Cuddio ffeiliau"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Mae cyfarwyddiadur %s eisoes yn cynnwys peth data\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Symud ffeiliau i'r rhaniad newydd"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Copïo %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Tynnu %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Mae rhaniad %s yn cael ei alw'n %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr "Mae'r rhaniadau wedi eu hail-rifo"
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Dyfais: "
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "Enw devfs:"
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr "Label y gyfrol:"
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Llythyren disg DOS: %s (dim ond dyfalu)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Math: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Enw : "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Dechrau: sector %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Maint: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sector"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d i silindr %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Wedi ei fformatio\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Heb ei fformatio\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Gosodwyd\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Ffeil(iau) Cylch-ôl:\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Cychwyn y rhaniad fel rhagosodwyd\n"
-"    (ar gyfer cychwyn MS-DOS, nid ar gyfer lilo)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Lefel %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Maint darn %d KiB\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Disg RAID %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Enw ffeil gylchol: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Mwy na thebyg rhaniad Gyrrwr\n"
-"yw'r rhaniad hwn. Gwell gadael\n"
-"llonydd iddo.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Mae'r rhaniad Bootstrap\n"
-"hwn ar gyfer cychwyniad\n"
-"dwbl eich system\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Darllen yn unig"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Maint: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometreg: %s silindr, %s pen, %s sector\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Gwybodaeth:"
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Disg LVM %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Tabl rhaniad math: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "ar sianel %d id %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Allwedd amgryptio system ffeil : "
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Dewiswch eich allwedd amgryptio system ffeiliau"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Mae'r allwedd amgryptio'n rhy syml (mae'n rhaid bod o leiaf %d nod o hyd)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Nid yw'r allweddi amgryptio'n cyd-fynd"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Allwedd amgryptio"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Allwedd amgryptio (eto)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Algorithm amgryptio"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Newid y math"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr ""
-"Methu mewngofnodi gan ddefnyddio enw defnyddiwr %s (cyfrinair anghywir?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Angen Dilysu Parth"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Pa enw defnyddiwr"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Un arall"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Rhowch eich enw defnyddiwr, cyfrinair ac enw parth i gael mynediad i'r "
-"gwesteiwr."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Enw defnyddiwr"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Chwiliwch am weinyddion"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Chwiliwch weinyddion newydd"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Rhaid i becyn %s gael ei osod. Ydych chi am ei osod?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Mae pecyn gorfodol %s ar goll"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Gosod pecynnau..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "Tynnu pecyn..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Yn fformatio rhaniad %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "methodd gosod rhaniad %s yng nghyfeiriadur %s"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Gwirio %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "gwall dadosod %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Galluogi rhaniad cyfnewid %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Yn fformatio rhaniad %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Creu a fformatio ffeil %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "Nid wyf yn gwybod sut i fformatio %s ym math %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "methodd  fformatio %s o %s"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"Peidiwch ddiweddaru amser mynediad inode ar y system ffeiliau\n"
-"(e.e. ar gyfer mynediad cynt ar y cylch newyddion i gyflymu gweinyddion "
-"newyddion)."
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"Dim ond ei osod yn benodol (h.y.,\n"
-"bydd y dewis -a yn achosi i'r system gael ei osod)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-"Peidio dehongli nod neu rwystro dyfeisiadau arbennig ar y system ffeil."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"Peidio caniatáu gweithrediad unrhyw dueddiad ar system ffeil wedi ei\n"
-"gosod. Gall y dewis fod yn ddefnyddiol ar gyfer gweinydd sydd ganddo\n"
-"systemau ffeiliau yn cynnwys tueddiad fel pensaernïaeth wahanol i'w un ei "
-"hun."
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"Peidio gadael i didau enw-defnyddiwr-set neu enw-grwp-set\n"
-"i gymryd effaith. (Mae i weld yn ddiogel on mae braidd yn anniogel os\n"
-"yw uidperl(1) wedi ei osod.)"
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Gosodwch y system ffeiliau fel darllen yn unig."
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "Dylai pob I/O i'r system ffeil gael ei wneud yn gydamserol"
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"Caniatáu i ddefnyddiwr cyffredin osod y system ffeil. Mae \n"
-"enw'r defnyddiwr gosod yn cael ei ysgrifennu i mtab fel ei fod yn gallu "
-"dadosod\n"
-"y system ffeil eto. Mae'r dewis yn arwyddo dewisiadau noexec, nosuid, and "
-"nodev\n"
-"(ac oni bai ei fod wedi diystyru gan ddewisiadau dilynol, fel yn y llinell "
-"dewis\n"
-"user,exec,dev,suid )."
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "Rhoi mynediad ysgrifennu i ddefnyddwyr cyffredin"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "Rhoi mynediad darllen yn unig i ddefnyddwyr cyffredin"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "Does dim modd defnyddio JFS ar raniadau llai na 16MB"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "Does dim modd defnyddio ReiserFS ar gyfer rhaniadau llai na 32MB"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "gyda /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "Gweinydd"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Nid wyf yn gallu darllen tabl rhaniad %s, mae'n rhy lygredig. :(\n"
-"Mae modd i mi fynd ymlaen i ddiystyru rhaniadau gwael (Bydd yr\n"
-"HOLL DDATA'n cael ei golli!).  Yr ateb arall yw peidio gadael i\n"
-"DrakX newid y tabl rhaniad. (y gwall yw %s)\n"
-"\n"
-"Ydych chi'n cytuno i golli'r holl raniadau?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Rhaid i bwyntiau gosod gynnwys / arweiniol"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Dylai enw'r pwyntiau gosod gynnwys llythrennau a  rhifau'n unig"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Mae yna eisoes raniad gyda phwynt gosod %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Rydych wedi dewis meddalwedd rhannu RAID fel gwraidd (/)\n"
-"Nid oes cychwynnwr yn gallu trin hwn heb raniad /boot\n"
-"Cofiwch ychwanegu rhaniad /boot"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "Does dim modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Rydych wedi dewis Cyfrol Resymegol LVM fel gwraidd (/)\n"
-"Nid oes cychwynnwr yn gallu trin hwn heb raniad /boot\n"
-"Cofiwch ychwanegu rhaniad /boot"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-"Efallai na fydd modd i chi osod lilo (gan nad yw lilo'n trin LV ar PV "
-"lluosog)"
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dylai'r cyfeiriadur aros o fewn y system ffeilio gwraidd"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Mae angen gwir system ffeilio (ext2, reiserfs,  xfs, neu jfs)) ar gyfer y "
-"pwynt gosod\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "Nid oes modd defnyddio Cyfrol Resymegol LVM ar gyfer pwynt gosod %s"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nid oes digon o le ar gyfer awto ddynodi"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Dim i'w wneud"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Disg Meddal"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Disg"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CDROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "Llosgwyr CD/DVD"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Tâp"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Cerdyn fideo"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "Cerdyn Teledu"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Dyfeisiau aml-gyfrwng eraill"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Cerdyn sain"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Camera Gwe"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Prosesyddion"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "Addaswyr ISDN"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Cerdyn Ethernet"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "Addaswyr ADSL"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Cof"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "Rheolyddion AGP"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Argraffydd"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Ffon hud"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "Rheolyddion SATA"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "Rheolyddion RAID"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Rheolyddion (E)IDE/ATA"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Rheolyddion firewire"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "Rheolyddion PCMCIA"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "Rheolyddion SCSI"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "Rheolyddion USB"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "Pyrth USB"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "Rheolyddion SMBus"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Rheolyddion pontydd a system"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Bysellfwrdd"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Llygoden"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Sganiwr"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Anhysbys/Eraill"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Arhoswch...Gosod y ffurfweddiad"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Dim gyrwyr eraill"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Nid oes gyrrwr OSS/ALSA  arall hysbys ar gyfer eich cerdyn sain (%s) sy'n "
-"defnyddio \"%s\" ar hyn o bryd"
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Ffurfweddiad sain"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Yma gallwch ddewis gyrrwr arall (un ai OSS neu ALSA) ar gyfer eich cerdyn "
-"sain (%s)"
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Mae eich cerdyn yn defnyddio'r gyrrwr %s\"%s\" ar hyn o bryd ( y gyrrwr "
-"arferol ar ei gyfer yw \"%s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) oedd yr API sain gyntaf. Mae'n API sail annibynnol o "
-"systemau gweithredu ( mae ar gael ar gyfer y rhan fwyaf o systemau unices) "
-"on mae'n API elfennol iawn a chyfyng.\n"
-"Mae gyrwyr OSS hefyd yn ail ddyfeisio'r hyn sy'n bod eisoes.\n"
-"\n"
-"Mae ALSA (Advanced Linux Sound Architecture) yn bensaernïaeth fodiwlaidd "
-"sy'n \n"
-"cynnal ystod eang o gardiau ISA, USB a PCI.\n"
-"\n"
-"Mae hefyd yn darparu API llawer uwch na OSS.\n"
-"\n"
-"I ddefnyddio alsa, mae modd defnyddio un ai:\n"
-"- hen api OSS cydweddus\n"
-"- api ALSA newydd sy'n darparu llawer o nodweddion gell ond sydd angen "
-"defnyddio llyfrgell ALSA.\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Gyrrwr:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Datrys problemau"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Rhybudd"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"Mae'r hen yrrwr \"%s\" wedi ei wahardd.\n"
-"\n"
-"Mae'n effeithio'n andwyol ar y cnewyllyn\n"
-"\n"
-"Bydd y gyrrwr \"%s|\"'n cael ei ddefnyddio ar y cychwyn"
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Dim gyrrwr cod agored"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Nid oes gyrrwr rhydd ar gyfer eich cerdyn sain (%s) ond mae gyrrwr "
-"perchnogol yn \"%s\" ."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Dim gyrrwr hysbys"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Nid oes gyrrwr hysbys ar gyfer eich cerdyn sain (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Gyrrwr anhysbys"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Gwall. Nid yw gyrrwr \"%s\" wedi ei restru"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Datrys problemau sain"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Prawf gwall sain - rhedeg y gorchmynion canlynol:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" pa yrwyr i'w defnyddio\n"
-"drwy ragosodiad\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" pa yrwyr mae'n defnyddio\n"
-"- \"/sbin/fuser -v /dev/dsp\" pa raglen sy'n defnyddio'r cerdyn sain.\n"
-"ar hyn o bryd\n"
-"\n"
-"- \"/sbin/lsmod\" gwirio os yw ei yrrwr wedi ei lwytho\n"
-"a'i peidio\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" a \"/sbin/chkconfig --list alsa\" dangos\n"
-"os yw sain a gwasanaethau alsa services sydd wedi eu ffurfweddu yn rhedeg\n"
-"ar initlevel 3\n"
-"\n"
-"- \"aumix -q\" a yw'r sain wedi ei ddistewi a'i peidio\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" pa rhaglen sy'n defnyddio'r cerdyn sain.\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Dewis gyrrwr fy hun"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Dewis gyrrwr ar hap"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Os ydych yn siŵr eich bod yn gwybod pa yrrwr sydd angen ar gyfer eich\n"
-"cerdyn yna dewiswch un o'r rhestr uchod\n"
-"\n"
-"Y gyrrwr presennol ar gyfer eich cerdyn \"%s\"  yw \"%s\" "
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Awtoganfod"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Anhysbys|Generig"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Anhysbys|CPH05X (bt878) [nifer o werthwyr]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Anhysbys|CPH06X (bt878) [nifer o werthwyr]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Ar gyfer y rhelyw o gardiau Teledu diweddar, mae modiwl bttv cnewyllyn GNU/"
-"Linux yn awto ganfod y paramedrau cywir.\n"
-"Os yw'ch cerdyn yn cael ei ganfod ar gam, mae modd gorfodi'r mathau cywir o "
-"gerdyn a rheolydd. Dewiswch baramedrau eich cerdyn teledu os oes raid"
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Model cerdyn:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Math o diwniwr"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "Nifer o fyfferau cipio:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "nifer o fyfferau cipio ar gyfer cipio mmap"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "Gosodiad PLL:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Cynnal radio:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "galluogi cynnal radio"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Cyn parhau dylech ddarllen amodau'r drwydded yn ofalus. Mae'n ymwneud\n"
-"â holl ddosbarthiad Mandriva Linux. Os ydych yn cytuno â'r holl amodau,\n"
-"cliciwch flwch \"%s\". Os nad, bydd clicio ar y botwm \"%s\" yn\n"
-"ail gychwyn eich cyfrifiadur."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Derbyn"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"Mae GNU/Linux yn system aml-ddefnyddiwr, ac mae hyn yn golygu bod pob\n"
-"defnyddiwr yn gallu cael ei ddewisiadau ei hun, ei ffeiliau ei hun ac yn y "
-"blaen.\n"
-"Gallwch ddarllen yr \"Starter Guide\" i ddysgu mwy. Ond yn annhebyg i "
-"\"gwraidd\",\n"
-"sef y gweinyddwr, ni fydd modd i'r defnyddiwr fyddwch yn eu creu yma'n "
-"gallu\n"
-"newid dim ond eu ffeiliau a'u ffurfweddiad ei hun gan amddiffyn y system "
-"rhag\n"
-"newidiadau anfwriadol neu faleisus fydd yn effeithio'r system gyfan. Bydd "
-"rhaid\n"
-"i chi greu un defnyddiwr cyffredin ar gyfer chi eich hun. Dyma'r cyfrif "
-"ddylech\n"
-"fewngofnodi iddo ar gyfer defnydd bob dydd. Er ei fod yn ymarferol iawn i "
-"fewngofnodi fel\n"
-"\"root\" gall fod yn beryglus iawn!. Gall y camgymeriad lleiaf olygu nad yw "
-"eich\n"
-"system yn gweithio ragor. Os wnewch chi gamgymeriad mawr  fel defnyddiwr\n"
-"cyffredin, byddwch ond yn colli rhywfaint o wybodaeth, ac nid y system "
-"gyfan.\n"
-"\n"
-"Yn gyntaf rhowch eich enw go iawn. Does dim rhaid, wrth gwrs  - mae modd\n"
-"i chi rhoi beth bynnag hoffech chi. Bydd DraX yn cymryd yr enw cyntaf a'i "
-"roi yn\n"
-"yr \"%s\" Dyma'r enw bydd y defnyddiwr hwn yn ei ddefnyddio i\n"
-"fewngofnodi i'r system. Mae modd ei newid.  Yna rhowch gyfrinair. Nid yw\n"
-"cyfrinair defnyddiwr cyffredin mor bwysig ag un \"gwraidd\" o safbwynt "
-"diogelwch\n"
-"ond nid yw hynny'n rheswm i'w esgeuluso - wedi'r cyfan mae eich ffeiliau "
-"mewn\n"
-"perygl\n"
-"\n"
-"Os wnewch chi glicio \"%s\", bydd modd ychwanegu faint\n"
-"fynnoch. Ychwanegwch ddefnyddiwr ar gyfer pob un o'ch ffrindiau: eich tad\n"
-"neu eich chwaer, e.e. Ar ôl ychwanegu'r holl ddefnyddwyr, cliciwch \"%s\".\n"
-"\n"
-"Bydd clicio'r botwm \"%s\" yn caniatáu i chi newid y \"cragen\" "
-"rhagosodedig\n"
-"ar gyfer y defnyddiwr hwnnw (bash yw'r rhagosodedig).\n"
-"\n"
-"Pan fyddwch wedi cwblhau ychwanegu defnyddwyr, bydd gofyn i chi ddewis\n"
-"defnyddiwr sy'n gallu mewngofnodi'n awtomatig mewngofnodi i'r system pan\n"
-"fydd y cyfrifiadur yn cychwyn.Os oes gennych ddiddordeb yn y nodwedd hon\n"
-"a dim gwahaniaeth am ddiogelwch, dewiswch y defnyddiwr a rheolwr ffenestr\n"
-"a chlicio \"%s\". Os nad dad-diciwch blwch \"%s\" ."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Enw defnyddiwr"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Nesaf"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Dyma'r rhaniadau Linux sydd wedi canfod ar eich disg caled.\n"
-"Gallwch gadw'r dewisiadau sydd wedi eu gwneud gan y dewin, maen nhw'n iawn\n"
-"ar gyfer y rhan fwyaf o osodiadau. Os ydych am wneud newidiadau, rhaid i chi "
-"o leiaf\n"
-"ddiffinio rhaniad gwraidd (\"/\"). Peidiwch ddewis rhaniad sy'n rhy fach neu "
-"fidicon"
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Mae gosodiad Mandriva Linux i'w gael ar nifer o CD-ROMau. Mae DrakX\n"
-"yn gwybod os yw pecyn penodol wedi ei leoli ar CD-ROM arall a bydd yn bwrw\n"
-"allan y CD cyfredol a gofyn am y llall. Os nad yw'r CD angenrheidiol "
-"gennych\n"
-"wrth law, cliciwch \"%s\", ac ni fydd y pecynnau hynny'n cael eu gosod."
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"Mae'n amser penderfynu pa raglenni rydych am eu gosod ar eich\n"
-"system. Mae yna filoedd o becynnau ar gael ar gyfer Mandriva Linux, ond\n"
-"i'w gwneud hi'n haws eu rheoli maent wedi cael eu gosod mewn grwpiau\n"
-"o raglenni tebyg.\n"
-"\n"
-"Mae Mandriva Linux wedi trefnu'r grwpiau pecynnau i bedwar categori. Mae\n"
-"modd dewis a dethol rhaglenni o'r categorïau gwahanol, fel bo \"Man Gwaith"
-"\"\n"
-"yn medru cael rhaglenni o'r categori \"Gweinydd\".\n"
-"\n"
-" * \"%s\": os ydych yn bwriadu defnyddio eich peiriant fel man\n"
-"gwaith yna dewiswch un o'r grwpiau cyfatebol.\n"
-"\n"
-" * \"%s\": os yw'r peiriant yn cael ei ddefnyddio i raglennu, dewiswch\n"
-" y grwpiau perthnasol. Bydd y grŵp arbennig \"LSB\" yn ffurfweddu\n"
-"eich system fel ei fos yn cyd-fynd gymaint ag y bo modd gyda manyleb\n"
-"Linux Standard Base.\n"
-"\n"
-"   Bydd dewis grŵp \"LSB\" hefyd yn gosod cnewyllyn cyfres \"2.4\",\n"
-"yn lle'r \"2.6\" rhagosodedig. Mae hyn i sicrhau cydymffurfiad llawn\n"
-"y system gyda LSB. Er hynny, os nad ydych yn dewis grŵp \"LSB\"\n"
-"bydd eich system yn cydymffurfio bron yn 100%% gyda LSB.\n"
-"\n"
-" * \"%s\": os yw'n fwriad defnyddio eich peiriant fel gweinydd dewiswch\n"
-" y gwasanaethau cyffredin rydych am eu gosod ar eich peiriant.\n"
-"\n"
-" * \"%s\": dyma'r lle i ddewis eich amgylchedd graffigol.\n"
-"Rhaid dewis o leiaf un er mwyn cael man gwaith graffigol!\n"
-"\n"
-"Bydd symud cyrchwr y llygoden dros enw grŵp yn amlygu esboniad byr am y\n"
-"grŵp hwnnw.\n"
-"\n"
-"Ticiwch flwch \"%s\", sy'n ddefnyddiol os ydych yn gyfarwydd â'r\n"
-"pecynnau sydd ar gael neu os ydych am gael rheolaeth lwyr dros\n"
-"beth fydd yn cael ei osod.\n"
-"\n"
-"Os fyddwch yn cychwyn y gosod ym modd \"%s\" gallwch ddad-ddewis\n"
-"pob grŵp ac atal gosod unrhyw becynnau newydd. Mae hyn yn ddefnyddiol\n"
-"ar gyfer trwsio neu ddiweddaru system bresennol.\n"
-"\n"
-"Os ydych wedi dad-ddewis pob grŵp wrth wneud gosodiad\n"
-"arferol ac nid uwchraddiad), bydd dialog yn ymddangos a chynnig\n"
-"dewisiadau amrywiol ar gyfer y gosodiad lleiaf\n"
-"\n"
-" * \"%s\" Gosod y nifer lleiaf o becynnau i gael bwrdd gwaith graffigol\n"
-"i weithio.\n"
-"\n"
-" * \"%s\" Gosod y system sylfaenol yn ogystal â gwasanaethau elfennol\n"
-"a'u dogfennau. Mae'r gosodiad hwn yn addas ar gyfer gosod gweinydd.\n"
-"\n"
-" * \"%s\" Gosod y lleiafswm posibl o becynnau i greu system Linux \n"
-"llinell orchymyn weithredol. Cyfanswm maint y gosodiad fydd tua 65MB."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Man Gwaith"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Datblygiad"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Amgylchedd Graffig"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Dewis pecynnau unigol."
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Uwchraddio"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Gyda X"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Gyda dogfennaeth elfennol"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Gosodiad lleiaf posibl"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"Os ydych wedi dewis gosod pecynnau'n unigol unigol, bydd y gosodwr\n"
-"yn cyflwyno coeden sy'n cynnwys yr holl becynnau wedi eu dosbarthu yn ôl\n"
-"grwp ac isgrwp. Wrth bori'r goeden, gallwch ddewis grwp cyfan, isgrwp \n"
-"neu becyn unigol.\n"
-"\n"
-"Pryd bynnag fyddwch wedi dewis pecyn ar y goeden, bydd disgrifiad yn\n"
-"ymddangos ar y dde. \n"
-"\n"
-"!! Os oes pecyn gweinydd wedi ei ddewis, yn fwriadol neu am ei fod yn rhan\n"
-"o grwp cyfan, bydd angen i chi gadarnhau eich bod eisiau i'r gweinyddion\n"
-"gael eu gosod. Ym Mandriva Linux mae unrhyw weinydd sydd wedi ei\n"
-"osod yn cael ei gychwyn fel rhagosodiad wrth gychwyn. Hyd yn oed os ydynt\n"
-"yn ddiogel a doedd dim materion pryder pan gafodd y dosbarthiad ei ryddhau,\n"
-"mae'n bosibl i fylchau diogelwch gael eu darganfod wedi i'r fersiwn hwn o\n"
-"Mandriva Linux gael ei gwblhau. Os nad ydych yn gwybod beth mae\n"
-"gwasanaeth arbennig i fod i'w wneud na pham mae wedi ei osod, yna\n"
-"cliciwch\"%s\". Bydd clicio \"%s\" yn gosod y gwasanaethau hynny a\n"
-"byddant yncael eu cychwyn yn awtomatig drwy ragosodiad!!\n"
-"\n"
-"Mae'r dewis \"%s\"yn analluogi'r deialog rhybudd sy'nymddangos bob\n"
-" tro fydd y gosodwr yn dewis pecyn yn awtomatig. Mae hyn yn digwydd\n"
-"am ei fod wedi penderfynu ei fod angen bodlon dibyniad gyda phecyn arall\n"
-"er mwyn cwblhau'r gosodiad yn llwyddiannus\n"
-"\n"
-"Mae'r eicon disg medal bychan ar waelod y rhestr yn caniatáu llwytho'r\n"
-"rhestr pecynnau dewiswyd yn ystod gosodiad blaenorol. Bydd clicio\n"
-"ar yr eicon hwn yn gofyn i chi osod yn y peiriant disg meddal grëwyd ar\n"
-"ddiwedd gosodiad arall. Gwelwch yr ail neges o'r cam diwethaf ar sut i\n"
-"greu disg meddal o'r fath."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "Dibyniaethau awtomatig"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"\"%s\": mae clicio ar y botwm\"%s\" yn agor dewin ffurfweddu argraffydd.\n"
-"Darllenwch y pennawd penodol yn y 'Starter Guide' am ragor o \n"
-"wybodaeth ar sut i osod argraffydd newydd. Mae'r rhyngwyneb yn y llawlyfr\n"
-"yn debyg i'r un welwyd wrth osod y system."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Ffurfweddu"
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Dewiswch pa wasanaethau rydych am eu cael wrth gychwyn eich cyfrifiadur.\n"
-"\n"
-"Bydd DrakX yn rhestri'r holl wasanaethau sydd ar gael gyda'r gosodiad "
-"cyfredol.\n"
-"Darllenwch y rhestr yn ofalus a dad-diciwch y rhai nad oes eu hangen bob "
-"tro\n"
-"wrth gychwyn.\n"
-"\n"
-"Mae modd cael esboniad byr am wasanaeth wrth eu dewis. Ond, os nad ydych\n"
-"yn siwr a yw'r gwasanaeth o werth neu beidio, mae'n well cadw at y drefn\n"
-"rhagosodedig\n"
-"\n"
-"!!Byddwch yn ofalus iawn os ydych am ddefnyddio eich peiriant fel gweinydd:\n"
-"mwy na thebyg na fyddwch eisiau cychwyn unrhyw wasanaethau nad oes eu\n"
-"hangen. Cofiwch fod cael nifer o wasanaethau wedi eu galluogi ar y "
-"gweinydd,\n"
-"fod yn beryglus. Yn gyffredinol, dim ond dewis y gwasanaethau mae'n rhaid eu "
-"cael !!"
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"Mae GNU/Linux yn rheoli amser drwy GMT (Greenwich Mean Time)\n"
-"a'i drosi i amser lleol yn ôl y parth amser rydych wedi ei ddewis.\n"
-"Mae'n bosib dad-ddewis hyn drwy ddad-ddewis \"%s\" fel bod y cloc\n"
-"caledwedd yr un a chloc y system yr un peth. Mae hyn yn ddefnyddiol\n"
-"pan fo'r peiriant yn westai i system arall.\n"
-"\n"
-"Bydd y dewis \"%s\" yn rheoli'r cloc yn awtomatig drwy gysylltu \n"
-"â gweinydd amser ar y Rhyngrwyd. Yn y rhestr sy'n cael ei gynnig \n"
-"dewiswch yr agosaf atoch. Rhaid i'ch cyswllt â'r we fod yn gweithio\n"
-"i hyn ddigwydd. Bydd yn gosod ar eich peiriant wasanaethwr amser fydd\n"
-"o ddewis yn medru cael ei ddefnyddio gan beiriannau eraill ar eich "
-"rhwydwaith."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Cloc caledwedd wedi ei osod i GMT"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Cydweddi amser awtomatig"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"Cerdyn Graffeg\n"
-"\n"
-"    Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y cerdyn graffig sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich cerdyn o'r rhestr.\n"
-"\n"
-"  Mewn achos lle mae gweinyddion eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gweinydd gorau\n"
-"ar eich cyfer."
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"X (sef X Window System) yw calon rhyngwyneb graffigol GNU/Linux a'r\n"
-"hyn mae'r holl amgylcheddau graffigol (KDE, Gnome, AterStep,\n"
-"WindowMaker, etc) sy'n dod gyda Mandriva Linux yn dibynnu arno.\n"
-"\n"
-"Byddwch yn derbyn rhestr o baramedrau gwahanol i'w newid i gael\n"
-"y dangosiad graffigol gorau:\n"
-"\n"
-" Cerdyn Graffeg\n"
-"\n"
-"    Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y cerdyn graffeg sydd ar eich cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich cerdyn.\n"
-"\n"
-"  Mewn achos lle mae gweinyddion eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gweinydd gorau\n"
-"ar eich cyfer.\n"
-"\n"
-"\n"
-"Dangosydd\n"
-"\n"
-"    Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y dangosydd sy'n gysylltiedig â'ch cyfrifiadur. Os nad yw hyn yn gywir,\n"
-"mae'n dangos eich dangosydd.\n"
-"\n"
-"\n"
-"\n"
-"Cydraniad\n"
-"\n"
-"   Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
-"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
-"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
-"ar y dangosydd.\n"
-"\n"
-"\n"
-"\n"
-"Prawf\n"
-"\n"
-"  Bydd y system yn ceisio agor sgrin graffigol yn unol â'r cydraniad "
-"dewisol.\n"
-"Os ydych yn gweld y neges yn ystod y prawf ac ateb \"%s\", yna bydd\n"
-"DrakX yn symud ymlaen i'r cam nesaf. Os nad ydych yn gweld y neges nesaf\n"
-"mae'n golygu fod rhan o'r drefn awtoganfod yn anghywir a bydd y prawf\n"
-"yn dod i ben ar ôl 12 eiliad, gan ddod a chi nôl i'r ddewislen. Newidiwch y\n"
-"gosodiadau nes i chi gael y sgrin i edrych yn iawn.\n"
-"\n"
-"\n"
-"\n"
-"Dewisiadau\n"
-"\n"
-"   Yma cewch ddewis p'un ai i drefnu i'ch cyfrifiadur newid yn awtomatig i\n"
-"rhyngwyneb graffigol wrth gychwyn. Yn amlwg byddwch angen ticio \"%s\"\n"
-"os yw eich peiriant i weithredu fel gweinydd, neu os na fuoch yn\n"
-"llwyddiannus yn ffurfweddu'r dangosydd."
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Dangosydd\n"
-"\n"
-"    Mae'r gosodwr fel rheol yn canfod ac yn ffurfweddu'n awtomatig\n"
-"y dangosydd sy'n gysylltiedig â'ch cyfrifiadur. Os nad yw hyn yn wir,\n"
-"dewiswch eich dangosydd o'r rhestr."
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Cydraniad\n"
-"\n"
-"   Cewch ddewis yma gydraniad a dyfnder lliw rhwng y rhai sydd ar gael\n"
-"ar gyfer eich caledwedd. Dewiswch yr un sydd orau ar eich cyfer (bydd\n"
-"modd newid hynny wedi'r gosod) Mae enghraifft o ffurfweddiad i'w weld\n"
-"ar y dangosydd."
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"Mewn achos lle mae gweinyddion eraill i'w cael i'ch cerdyn, gyda\n"
-"neu heb gyflymydd 3D, mae cynnig i chi ddewis y gweinydd gorau\n"
-"ar eich cyfer."
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Dewisiadau\n"
-"\n"
-" Yma gallwch ddewis os ydych am i'ch cyfrifiadur droi i ryngwyneb graffig\n"
-"wrth gychwyn y cyfrifiadur.  Yn amlwg, byddwch am ateb \"%s\" os yw\n"
-"eich peiriant i weithredu fel gweinydd, neu os nad oeddech yn\n"
-"llwyddiannus yn cael eich dangosydd i ffurfweddu'n gywir."
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"Mae angen i chi nawr ddewis lle ar eich disg caled i osod eich system\n"
-"weithredu Mandriva Linux. Os yw eich disg caled yn wag neu os oes\n"
-"yna system weithredol eisoes yn cymryd yr holl le sydd ar gael, bydd\n"
-"angen i chi greu rhaniadau arno. Yn y bôn, mae rhannu disg caled yn\n"
-"golygu ei rhannu'n rhesymegol i greu lle i osod eich system Mandriva\n"
-"Linux newydd.\n"
-"\n"
-"Gan fo effaith y broses rannu'n ddidroi nôl,  gan arwain at golli data os\n"
-"oes system weithredol eisoes ar y gyrrwr, gall creu rhaniadau fod yn\n"
-"broses anodd a straenus os ydych yn ddefnyddiwr dibrofiad. Yn ffodus,\n"
-"mae gan DrakX ddewin sy'n symleiddio'r broses. Cyn cychwyn, \n"
-"darllenwch y llawlyfr a chymerwch bwyll.\n"
-"\n"
-"Yn ddibynnol ar ffurfweddiad eich disg caled, mae dewisiadau ar gael:\n"
-"\n"
-" * \"%s\": mae'r dewis hwn yn arwain at greu rhaniadau awtomatig\n"
-"o'ch disg(iau) caled gwag. Bydd dim cwestiynau eraill os byddwch\n"
-"yn defnyddio'r dewis hwn.\n"
-"\n"
-" * \"%s\": mae'r dewin wedi canfod un neu fwy o raniadau Linux\n"
-"cyfredol ar eich disg caled. Os ydych am eu defnyddio, dewiswch y\n"
-"dewis hwn. Bydd gofyn i chi ddewis pwyntiau gosod yn gysylltiedig\n"
-"â phob rhaniad. Mae'r pwyntiau gosod gosodedig wedi eu dewis,\n"
-"ac ar y cyfan mae'n syniad da cadw atynt.\n"
-"\n"
-" * \"%s\": os yw Microsoft Windows ar eich disg caled ac yn cymryd\n"
-"y lle i gyd, bydd rhaid i chi greu lle ar gyfer data Linux. I wneud hynny\n"
-"gallwch ddileu eich rhaniad a data Microsoft Windows (Gw. atebion\n"
-"\"Dileu'r ddisg gyfan \") neu ail-lunio maint rhaniad FAT Microsoft "
-"Windows.\n"
-"Mae modd ail lunio maint y rhaniad heb golli data cyn belled eich bod wedi\n"
-"dad-ddarnio rhaniad Windows ac mae'n defnyddio fformat Windows.\n"
-"Argymhellir cadw data wrth gefn hefyd. Argymhellir gwneud hyn os ydych\n"
-"am ddefnyddio Mandriva Linux a Microsoft Windows ar yr un cyfrifiadur.\n"
-"\n"
-"  Cyn gwneud y dewis hwn, cofiwch y bydd maint eich rhaniad Microsoft\n"
-"Windows yn llai nag yw ar hyn o bryd ar ol dilyn y drefn yma. Bydd gennych\n"
-"llai o le yn Microsoft Windows i gadw data neu i osod meddalwedd newydd\n"
-"\n"
-" * \"%s\" os ydych am ddileu'r holl ddata a rhaniadau presennol ar\n"
-"eich disg caled a'u cyfnewid am system Mandriva Linux, yna dewiswch\n"
-"hwn. Byddwch yn ofalus wrth wneud hyn gan na fydd modd troi nôl\n"
-"ar ôl cadarnhau.\n"
-"\n"
-"  !! Os ydych yn dewis hwn, byddwch yn colli'r holl ddata ar eich disg.  !!\n"
-"\n"
-" * \"%s\": Bydd y dewis yma'n ymddangos pam mae'r ddisg gyfan wedi\n"
-"ei chymryd gan Microsoft Windows. Bydd hwn yn dileu popeth o'r disg\n"
-"caled a chychwyn popeth o'r newydd, gan greu rhaniadau newydd.\n"
-"\n"
-"  !! Os ydych yn dewis hwn, byddwch yn colli'r holl ddata ar eich disg.  !!\n"
-"\n"
-" * \"%s\": dewiswch hwn os ydych am rannu'r disg caled gyda llaw.\n"
-"Byddwch ofalus - mae'n ddewis pwerus a pheryglus. Mae modd i chi \n"
-"golli'ch holl ddata. Peidiwch dewis hwn oni bai eich bod yn gwybod beth\n"
-"ydych yn ei wneud.. Am ragor o wybodaeth ar sut i ddefnyddio DiskDrake,\n"
-"darllenwch adran \"Managing your Partitions\" yn y \"Starter Guide\"."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Defnyddiwch le gwag"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Defnyddiwch y rhaniadau presennol"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Defnyddiwch y lle gwag ar raniad Windows"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Dileu'r ddisg gyfan"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Tynnu Windows"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Rhannu disg unigol"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"Dyna ni, mae'r gosodiad wedi ei gwblhau ac mae eich system GNU/Linux\n"
-"yn barod i'w ddefnyddio. Cliciwch \"%s\" i ailgychwyn y cyfrifiadur. "
-"Peidiwch\n"
-"anghofio tynnu'r cyfrwng gosod (CD-ROM neu feddal). Y peth cyntaf i chi\n"
-"weld ar ôl i'ch cyfrifiadur gwblhau ei brofion caledwedd yw'r ddewislen\n"
-"llwytho, sy'n rhoi dewis o ba system i'w chychwyn.\n"
-"\n"
-"Mae'r botwm \"%s\" yn dangos dau fotwm arall:\n"
-"\n"
-" *\"%s\": i greu disg meddal gosod fydd yn creu yn awtomatig osodiad\n"
-"cyflawn heb gymorth gweithredwr, yn debyg i'r gosodiad sydd\n"
-"newydd ei ffurfweddu.\n"
-"\n"
-"Sylwer bod dau ddewis gwahanol i'w gael wedi clicio'r botwm:\n"
-"\n"
-" *\"%s\". Gosodiad rhannol awtomatig gan fod mai'r cam o greu\n"
-"rhaniad yw'r unig ran ryngweithiol o'r broses.\n"
-"\n"
-" *\"%s\".Gosodiad cwbl awtomatig: mae'r disg caled wedi ei\n"
-"ailysgrifennu'n llwyr, a'r holl ddata wedi ei golli.\n"
-"\n"
-"Mae hwn yn nodwedd ddefnyddiol iawn wrth osod ar nifer fawr o\n"
-"beiriannau tebyg. Gw. yr adran Auto install ar ein safle gwe.\n"
-"\n"
-"*\"%s\":(*): mae hwn yn cadw'r dewis o becynnau wnaed cynt.\n"
-"Wrth wneud gosodiad arall, rhowch ddisg meddal yn y gyrrwr a rhedeg\n"
-"y gosodiad gan fynd i'r sgrin cymorth drwy wasgu'r fysell [F1], \n"
-"a theipio >>linux defcfg=\"floppy\"<< a phwyso bysell [Enter].\n"
-"\n"
-"(*) Bydd angen disg meddal wedi ei fformatio fel FAT (i greu un yn\n"
-"GNU/Linux, teipiwch \"mformat a:\" neu \"fdformat /dev/fd0\" wedi\n"
-"ei ddilyn gan \"mkfs.vfat /dev/fd0\"."
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Ail chwarae"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Awtomeiddwyd"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Cadw'r dewis becynnau"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Efallai y byddwch eisiau ailfformatio rhai rhaniadau presennol i ddileu "
-"data\n"
-"sydd arnynt. Os ydych am wneud hynny, dewiswch y rhaniadau hynny hefyd.\n"
-"\n"
-"Sylwch nad oes angen ailfformatio'r holl raniadau sy'n bodoli eisoes. "
-"Rhaid \n"
-"ailfformatio'r rhaniadau sy'n cynnwys y system weithredu [megis \"/\",\"usr"
-"\"\n"
-"neu \"/var\") ond nid oes rhaid i chi ail fformatio rhaniadau sy'n cynnwys\n"
-"data rydych am ei gadw (e.e. \"/home\").\n"
-"\n"
-"Byddwch ofalus wrth ddewis rhaniadau. Ar ôl fformatio bydd yr holl ddata ar\n"
-"y rhaniadau'n cael eu dileu ac ni fydd modd ei adfer.\n"
-"\n"
-"Cliciwch \"%s\" pan ydych yn barod i fformatio rhaniadau.\n"
-"\n"
-"Cliciwch \"%s\" os ydych am ddewis rhaniad arall ar gyfer eich gosodiad\n"
-"Mandriva Linux newydd\n"
-"\n"
-"Cliciwch \"%s\" os ydych am ddewis rhaniadau i'w gwirio am flociau\n"
-"gwallus ar y ddisg."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Blaenorol"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"Erbyn i chi osod Mandriva Linux, mae'n debygol y bydd rhai \n"
-"pecynnau wedi eu diweddaru ers y rhyddhad cychwynnol. Bydd rhai \n"
-"gwallau wedi eu cywiro a materion diogelwch wedi eu datrys. I ganiatáu\n"
-"i chi fanteisio ar hyn mae cynnig i chi eu llwytho i lawr o'r rhyngrwyd.\n"
-"Dewiswch \"%s\" os oes gennych gyswllt gweithredol â'r rhyngrwyd,\n"
-"neu \"%s\"\"os ydych am osod pecynnau mwy diweddar rhywbryd eto.\n"
-"\n"
-"Bydd dewis \"%s\" yn dangos rhestr o leoedd o le mae modd derbyn\n"
-"diweddariadau. Dewiswch yr un agosaf atoch. Yna, bydd coeden dewis\n"
-"pecynnau yn ymddangos: Wedi i chi benderfynu ar eich dewis, cliciwch\n"
-"\"%s\" i estyn a gosod y pecynnau hynny neu \"%s\" i beidio."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Gosodiad"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"Yma mae DrakX yn caniatáu i chi ddewis lefel diogelwch y peiriant. Fel\n"
-"rheol, y mwyaf agored yw'r peiriant, y mwyaf pwysig yw'r data'r uchaf\n"
-"ddylai'r lefel diogelwch fod neu fod gan y peiriant gysylltiad uniongyrchol\n"
-"gyda'r rhyngrwyd. Er hynny, mae diogelwch yn dod ar draul\n"
-"hwylustod. \n"
-"\n"
-"Os nad ydych yn siŵr beth i'w ddewis, dewiswch y rhagosodedig. Byddwch\n"
-"yn gallu newid y lefel diogelwch yn ddiweddarach gyda draksec o\n"
-"Ganolfan Rheoli Mandriva.\n"
-"\n"
-"Mae maes \"%s\" yn gallu dweud wrth y system o'r defnyddiwr sydd â\n"
-"chyfrifoldeb am ddiogelwch. Bydd negeseuon diogelwch yn cael eu hanfon\n"
-"at y cyfeiriad hwnnw. "
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Cyfrinair Gweinyddwr"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Yn awr mae angen i chi ddewis pa raniadau i'w defnyddio ar gyfer gosodiad\n"
-"eich system Mandriva Linux. Os oes rhaniadau wedi eu diffinio eisoes, un\n"
-"ai drwy osodiad blaenorol o GNU/Linux neu gan offeryn rhannu arall, mae\n"
-"modd i chi ddefnyddio'r rhaniadau presennol. Os nad, rhaid i' rhaniadau'r\n"
-"ddisg caled gael eu diffinio.\n"
-"\n"
-"I greu rhaniadau, rhaid yn gyntaf ddewis disg caled. Mae modd dewis disg\n"
-"i'w rannu drwy glicio ar \"hda\" ar gyfer y ddisg IDE cyntaf., \"hdb\" ar\n"
-"gyfer yr ail, \"sda\" ar gyfer y ddisg SCSI cyntaf, ac yn y blaen.\n"
-"\n"
-"I greu'r rhaniad, mae modd defnyddio'r dewisiadau hyn:\n"
-"\n"
-" *\"%s\": mae'r dewis hwn yn dileu pob rhaniad ar ddisg.\n"
-"\n"
-" *\"%s\": mae'r dewis hwn yn caniatáu i chi greu'n awtomatig\n"
-"Ext2 a rhaniadau cyfnewid mewn lle gwag ar eich disg.\n"
-"\n"
-" *\"%s\": yn rhoi mynediad i ragor o nodweddion:\n"
-"\n"
-"   *\"%s\": mae hwn yn cadw'r tabl rhaniad i ddisg\n"
-"meddal. Mae hyn yn ddefnyddiol ar gyfer adfer tabl rhaniad, os fydd angen\n"
-"\n"
-"   \"%s\": mae hyn yn caniatáu adfer tabl rhaniad blaenorol\n"
-"o ddisg meddal.\n"
-"\n"
-"   \"%s\": os yw eich tabl rhaniad wedi ei ddifrodi, mae modd\n"
-"ceisio ei  adfer drwy'r dewis yma. Byddwch ofalus a chofiwch fod modd iddo\n"
-"fethu.\n"
-"\n"
-"   \"%s\": mae hwn yn dileu pob newid ac yn ail lwytho'r\n"
-"tabl rhaniad gwreiddiol.\n"
-"\n"
-"   *\"%s\": dad-diciwch y dewis hwn i osod a dad osod\n"
-"gyda llaw, cyfryngau symudol megis disgiau meddal ac CD-ROMau\n"
-"\n"
-"   *\"%s\": defnyddiwch y dewis hwn os ydych am ddefnyddio'r dewin i rannu\n"
-"eich disg caled. Dyma'sydd orau os nad oes gennych wybodaeth sylweddol ar\n"
-"rhannu\n"
-"\n"
-"   *\"%s\": defnyddiwch y dewis hwn i ddileu eich newidiadau\n"
-"\n"
-"    *\"%s\": mae hwn yn caniatáu gweithredoedd\n"
-"pellach ar raniadau. (Math, dewisiadau, fformat) ac mae'n cynnig mwy o\n"
-" wybodaeth.\n"
-"\n"
-"   *\"%s\":pan fyddwch wedi gorffen rhannu eich disg, bydd hwn yn cadw\n"
-" eich newidiadau yn ôl i'r ddisg\n"
-"\n"
-"Sylwer: mae modd cyrraedd y dewisiadau drwy'r bysellfwrdd. Symudwch drwy'r\n"
-" rhaniadau gan ddefnyddio [Tab] a'r saethau [I Fyny/I Lawr].\n"
-"\n"
-"Pan fydd rhaniad wedi ei ddewis, gallwch ddefnyddio:\n"
-"\n"
-" *Ctrl-c i greu rhaniad newydd (pan fo rhaniad gwag yn cael ei ddewis);\n"
-"\n"
-" *Ctrl-d i ddileu rhaniad;\n"
-"\n"
-" *Ctrl-m i greu pwynt gosod;\n"
-"\n"
-"I dderbyn gwybodaeth am yr amrywiol systemau ffeil sydd ar gael, darllenwch "
-"y\n"
-" pennawd ar ext2fs yn y ``Reference Manual''.\n"
-"\n"
-"Os ydych yn gosod ar beiriant PPC, bydd angen i chi greu \"ymlwythwr\" \n"
-" bychan o leiaf 1MB o faint, fydd yn cael ei ddefnyddio gan ymlwythwr "
-"yaboot.\n"
-"Os ydych yn dewis gwneud y rhaniad rhywfaint yn fwy, dyweder tua 50MB, yna\n"
-"gall fod yn le defnyddiol i gadw cnewyllyn sbâr a delweddau ramdisk ar "
-"gyfer\n"
-" sefyllfaoedd cychwyn argyfyngus!"
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Awto gosod cyfrwng symudol"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Amnewid rhwng modd arferol/arbenigol"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mae mwy nag un rhaniad Microsoft wedi ei ganfod ar eich disg caled.\n"
-"Dewiswch ba un rydych am newid ei faint er mwyn gosod eich\n"
-"system weithredu Mandriva Linux newydd\n"
-"\n"
-"Mae pob rhaniad wedi ei restri fel hyn: \"Enw Linux\", \"Enw Windows\",\n"
-"\"Maint\".\n"
-"\n"
-"Mae \"Enw Linux\" wedi ei strwythuro fel hyn: \"math o ddisg caled\", \n"
-"\"rhif y disg caled\", \"rhif y rhaniad\" (e.e., \"hda1\").\n"
-"\n"
-"\"hd\" yw'r \"Math o ddisg caled\" os mai disg caled IDE sydd gennych\n"
-"a \"sd\" yw disg caled SCSI.\n"
-"\n"
-"Llythyren wedi'r \"hd\" neu \"sd\" yw'r \"Rhif disg caled\" bob tro.\n"
-"Gyda disgiau caled IDE:\n"
-"\n"
-" * mae \"a\" yn golygu \"prif ddisg caled ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"b\" yn golygu \"ddisg caled gwas ar y rheolydd IDE cyntaf\",\n"
-"\n"
-" * mae \"c\" yn golygu \"prif ddisg caled ar yr ail reolydd IDE\",\n"
-"\n"
-" * mae \"d\" yn golygu \"ddisg caled gwas ar yr ail reolydd IDE\",\n"
-"\n"
-"Gyda disgiau caled SCSI mae \"a\" yn golygu'r \"enw SCSI isaf\", ac mae\n"
-" \"b\" yn golygu'r \"ail enw SCSI isaf\", ag ati.\n"
-"\n"
-"Mae \"Enw Windows\" yn cyfeirio at y llythyren y disg caled o dan\n"
-" Windows (\"C:\" yw'r ddisg  neu raniad cyntaf)."
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"%s\":gwiriwch y dewis gwlad. Os nad ydych yn y wlad hon cliciwch y\n"
-"botwm \"%s\"a dewis un arall. Os nad yw eich gwlad ar y rhestr gyntaf,\n"
-"cliciwch \"%s\" i edrych ar y rhestr gyflawn."
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"Mae'r cam hwn yn cael ei weithredu os oes hen raniad GNU/Linux wedi\n"
-"ei ganfod ar y cyfrifiadur.\n"
-"\n"
-"Bydd DrakX angen gwybod a ydych am osod o'r newydd neu uwchraddio\n"
-"system Mandriva Linux presennol.\n"
-"\n"
-" *\"%s\" Ar y cyfan, mae hwn yn tynnu'r hen system gyfan oddi ar eich\n"
-"cyfrifiadur. Er hynny, yn ddibynnol ar eich trefn rhannu, mae modd atal\n"
-"peth o'ch data (yn arbennig, cyfeiriaduron \"home\" ) rhag cael ei "
-"ysgrifennu drosto. Os ydych am newid rhaniadau eich disgiau caled, neu newid "
-"y\n"
-"system ffeil, dylech ddewis hwn.\n"
-"\n"
-" *\"%s\": Mae'r dosbarth gosod hwn yn caniatáu i chi ddiweddaru'r\n"
-"pecynnau sydd wedi eu gosod ar eich system Mandriva Linux. Bydd eich\n"
-"rhaniadau presenol a'ch data personol yn cael eu cadw. Bydd y rhan fwyaf\n"
-"o'r camau ffurfweddu ar gael fel gyda'r gosod arferol.\n"
-"\n"
-"Dylai defnyddio \"Diweddaru\" weithio'n iawn ar systemau Mandriva Linux\n"
-"sy'n rhedeg systemau \"8.1\" neu'n ddiweddarach. Nid yw uwchraddio\n"
-"fersiynau cyn Mandriva Linux \"8.1\" yn cael ei gymeradwyo."
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Fel arfer mae DrakX yn dewis y bysellfwrdd cywir ar eich cyfer ( gan "
-"ddibynnu pa\n"
-" iaith rydych wedi ei ddewis(). Gwiriwch fod y dewis yn addas neu dewiswch "
-"gynllun\n"
-"bysellfwrdd arall.\n"
-"\n"
-"Efallai nad oes gennych fysellfwrdd sy'n cyfateb yn union i'ch iaith: e.e., "
-"os ydych\n"
-"yn Americanwr sy'n siarad Cymraeg, efallai eich bod am gadw eich "
-"bysellfwrdd\n"
-"Americanaidd. Neu os ydych yn siarad Cymraeg ac yn byw yn Hong Kong mae'r\n"
-" un sefyllfa'n codi. Yn y ddwy achos bydd angen i chi fynd yn ôl i'r cam yma "
-"yn y\n"
-" gosodiad a dewis y bysellfwrdd perthnasol o'r rhestr.\n"
-"\n"
-"Cliciwch ar fotwm \"%s\" i dderbyn y rhestr o fysellfyrddau sy'n cael eu "
-"cynnal.\n"
-" \n"
-"Os fyddwch yn dewis cynllun bysellfwrdd wedi ei seilio ar wyddor an-"
-"Lladinaidd, \n"
-"bydd y deialog nesaf yn caniatáu i chi ddewis rwymiad allwedd fydd yn newid "
-"y\n"
-"bysellfwrdd rhwng cynlluniau Lladin ac an-Lladin."
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"Y cam cyntaf yw dewis eich hoff iaith.\n"
-"\n"
-"Bydd eich dewis iaith yn effeithio ar iaith y gosodwr, y ddogfennaeth\n"
-" a'r system yn gyffredinol. Dewiswch yr ardal lle rydych ac yna eich iaith.\n"
-"\n"
-"Bydd clicio ar y botwm \"%s\" yn caniatáu i chi ddewis ieithoedd eraill\n"
-"i'w gosod ar eich peiriant gwaith. Bydd dewis ieithoedd eraill yn gosod\n"
-"ffeiliau  penodol sy'n cynnwys dogfennaeth a rhaglenni yn yr ieithoedd\n"
-"hynny. Er enghraifft, os ydych yn westeiwr ar gyfer defnyddwyr o Sbaen,\n"
-"dewiswch Gymraeg fel y rhagosodedig yng ngolwg coeden ac yn yr Uwch\n"
-"adran cliciwch \"%s\". \n"
-"\n"
-"Ynghylch cefnogaeth UTF-8 (unicode): Amgodiad nod newydd yw Unicode\n"
-"sydd i gynnwys pob iaith. Er hynny, mae cefnogaeth i bob iaith o fewn\n"
-"GNU/Linux yn dal yn cael ei ddatblygu Oherwydd hynn mae defnydd\n"
-"Mandriva Linux o UTF-8 yn ddibynnol ar ddewis y defnyddiwr:\n"
-"\n"
-" * Os ydych yn dewis iaith gyda hen amgodiad cryf (ieithoedd lladin1\n"
-"Rwsieg, Siapanëeg, Tsieinëeg, Corëeg, Thai, Groeg, Twrceg, y rhan\n"
-" fwyaf o ieithoedd iso-8859-2) bydd yr hen amgodiad yn cael ei ddefnyddio;\n"
-"\n"
-" * Bydd ieithoedd eraill yn defnyddio unicode drwy ragosodiad;\n"
-"\n"
-" * Os oes angen dwy neu fwy o ieithoedd, ac nid yw'r ddwy iaith yn "
-"defnyddio'r\n"
-"un amgodiad, yna bydd unicode yn cael ei ddefnyddio drwy'r holl system\n"
-"\n"
-" * Yn olaf, mae modd gorfodi'r defnydd o unicode drwy'r system gyfan ar\n"
-"gais y defnyddiwr drwy ddewis  \"%s\" yn annibynnol o ba iaith sydd wedi cêl "
-"ei ddewis.\n"
-"\n"
-"Sylwer bod modd gosod mwy nag un iaith. Mae modd i chi ddewis mwy\n"
-"nag un, neu hyd yn oed eu gosod i gyd, drwy ddewis y blwch \"%s\".\n"
-"Mae dewis cefnogaeth i bob iaith yn golygu gosod cyfieithiadau, ffontiau, \n"
-"gwiryddion sillafu, ag ati, ar gyfer yr iaith honno.\n"
-"\n"
-"I newid rhwng yr ieithoedd amrywiol sydd ar y system gallwch gychwyn\n"
-"y gorchymyn  \"/usr/sbin/localedrake\" fel \"root\" i newid yr iaith\n"
-"sy'n cael ei ddefnyddio gan y system gyfan. Bydd rhedeg y gorchymyn fel\n"
-"defnyddiwr cyffredin yn gweithio dim ond ar gyfer yr unigolyn hwnnw."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "Sbaeneg"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"Fel rheol does gan DrakX ddim problem yn canfod y nifer o fotymau ar eich\n"
-"llygoden. Os yw, bydd yn cymryd for gennych lygoden dau fotwm a bydd yn\n"
-"ffurfweddu efelychiad trydydd botwm. Mae modd pwyso trydydd botwm\n"
-"llygoden dau fotwm ar unwaith gan glicio'r botymau chwith a de. Bydd DrakX\n"
-"yn gwybod yn awtomatig p'un ai yw'r llygoden yn defnyddio rhyngwyneb PS/2\n"
-"cyfresol neu USB.\n"
-"\n"
-"Lle mae gennych lygoden 3 botwm heb olwyn, cewch ddewis y llygoden sy'n\n"
-"dweud  \"%s\". Bydd DrakX yn ffurfweddu eich llygoden fel bod modd "
-"efelychu'r\n"
-"olwyn gydag ef: i wneud hynny pwyswch y botwm canol a symud eich llygoden "
-"nôl a blaen.\n"
-"\n"
-"Os am ryw reswm yr hoffech nodi llygoden o fath gwahanol, dewiswch un\n"
-"o'r rhestr amgaeëdig.\n"
-"\n"
-"Gallwch ddewis \"%s\" i ddewis math llygoden ``generic'' sy'n gweithio gyda\n"
-"bron bob llygoden.\n"
-"\n"
-"Os fyddwch yn dewis llygoden wahanol i'r rhagosodedig gyd sgrin\n"
-"profi'n cael ei ddangos. Defnyddiwch y botymau a'r olwyn i wirio fod\n"
-"y gosodiadau'n gywir a bod y llygoden yn gweithio'n iawn. Os nad yw'r\n"
-"llygoden yn gweithio'n dda, pwyswch y bar bylchu neu fysell [Return] i\n"
-"i ddiddymu'r prawf ac i fynd nôl i'r rhestr dewis.\n"
-"\n"
-"Ar brydiau nid yw llygod olwyn yn cael eu canfod yn awtomatig, felly bydd\n"
-"angen dewis eich llygoden o'r rhestr. Gwnewch yn siŵr eich bod yn dewis\n"
-"y porth sy'n cyfateb i le mae eich llygoden. Ar ôl dewis llygoden a "
-"phwyso'r\n"
-"botwm \"%s\" , bydd delwedd llygoden yn cael ei dangos ar y sgrin. Trowch\n"
-"olwyn y llygoden i sicrhau ei fod yn gweithio'n iawn. Unwaith i chi weld yr\n"
-"olwyn ar y sgrin yn symud wrth i chi droi'r olwyn. profwch y botymau a "
-"gwirio fod\n"
-"pwyntydd y llygoden yn symud ar y sgrin wrth i chi symud y llygoden."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "gydag efelychiad Olwyn"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Cyffredinol | Unrhyw lygoden PS/2 ac USB"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Dewiswch y porth cywir. Mae porth \"COM1\" o dan MS Windows yn cael ei alw "
-"yn\n"
-"\"ttyS0\" yn GNU/Linux, e.e."
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Mae hwn yn fan pwysig ynghylch diogelwch eich system GNU/Linux; rhaid\n"
-"rhoi cyfrinair \"root\".\"Root\" yw gweinyddwr y system a'r unig un sydd â'r "
-"hawl\n"
-"i wneud diweddariadau, ychwanegu defnyddwyr, newid ffurfweddiad cyffredinol\n"
-"y system, ac yn y blaen. Yn fyr mae \"root\" yn medru gwneud popeth! Dyna\n"
-"pam mae'n rhaid dewis cyfrinair sy'n anodd ei ddyfalu - bydd DrakX yn dweud\n"
-"wrthych os yw'n rhy hawdd. Fel y gwelwch, mae modd peidio gorfod cynnig\n"
-"cyfrinair, ond rydym yn argymell yn erbyn hyn, hyd yn oed am un rheswm:\n"
-"peidiwch â meddwl bod eich systemau gweithredu eraill yn ddiogel rhag\n"
-"camgymeriadau, gan eich bod wedi cychwyn o GNU/Linux. Gan fod \"root\" yn\n"
-"medru goresgyn unrhyw gyfyngiadau a dileu data'n anfwriadol ar bob rhaniad,\n"
-"drwy fynd at y rhaniadau'n ddi-hid, yna mae'n bwysig ei gwneud hi'n anodd "
-"bod\n"
-"yn \"root\".\n"
-"\n"
-"Dylai'r cyfrinair fod yn gyfuniad o rifau a llythrennau ac o leiaf 8 nod o "
-"hyd.\n"
-"Peidiwch ysgrifennu cyfrinair \"root\" ar bapur - bydd yn ei gwneud hi'n "
-"rhy\n"
-"hawdd gwanhau'r system.\n"
-"\n"
-"Er hynny, peidiwch â gwneud y cyfrinair yn rhy hir neu gymhleth am fod rhaid "
-"i\n"
-"chi fedri ei gofio heb ormod o drafferth.\n"
-"\n"
-"Ni fydd y cyfrinair yn cael ei ddangos ar y sgrin wrth i chi ei deipio. "
-"Felly bydd\n"
-" rhaid i chi deipio'r cyfrinair ddwywaith i leihau'r siawns o deipio gwall. "
-"Os ydych\n"
-"yn digwydd gwneud yr un gwall teipio ddwywaith, bydd rhaid defnyddio'r "
-"cyfrinair\n"
-"\"anghywir\" i gychwyn y tro cyntaf fel \"root\".\n"
-"\n"
-"Os hoffech i fynediad i'r cyfrifiadur gael ei reoli gan wasanaethwr dilysu, "
-"cliciwch\n"
-"y botwm \"%s\".\n"
-"Os yw eich rhwydwaith yn defnyddio protocol gwasanaethau dilysu LDAP, NIS\n"
-"neu PDC Windows Domain, dewiswch un addas fel \"%s\",\n"
-"Os nad ydych yn gwybod,  gofynnwch i'ch gweinyddwr rhwydwaith\n"
-"\n"
-"Os ydych yn cael anawsterau atgoffa cyfrineiriau, gallwch ddewis\n"
-"\"%s\", os na fydd eich cyfrifiadur yn cael cyswllt â'r we ac rydych\n"
-"yn ymddiried yn y defnyddiwr."
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "dilysu"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"Rhaglen fechan yw'r cychwynnwr sy'n cael ei gychwyn gan y cyfrifiadur.\n"
-"Mae'n gyfrifol am gychwyn y system i gyd. Fel rheol mae'r rhan yma'n\n"
-"digwydd yn awtomatig. Bydd DrakX yn dadansoddi'r adran cychwyn\n"
-"disg a gweithredu yn â'r yr hyn mae'n ei ganfod yno.\n"
-"\n"
-" *os yw'n canfod adran cychwyn Windows, bydd yn ei amnewid gyda\n"
-"adran cychwyn GRUB/LILO. O ganlyniad bydd modd i chi gychwyn un\n"
-"ai GNU/Linux neu system arall.\n"
-"\n"
-" *os fydd adran gychwyn GRUB neu LILO'n cael ei ganfod bydd yn ei\n"
-"amnewid gydag un mwy diweddar.\n"
-"\n"
-"Os nad yw'n medru penderfynu, bydd DrakX yn gofyn i chi lle i osod\n"
-"y cychwynnydd. Yn gyffredinol, \"%s\" yw'r man mwyaf diogel. Ni fydd\n"
-" dewis \"%s\" yn gosod cychwynnydd. Dim ond ar gyfer y gwybodus."
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Yma byddwn yn dewis system argraffu i'ch cyfrifiadur ei ddefnyddio. Efallai\n"
-"bod systemau eraill yn cynnig un i chi, ond mae Mandriva yn cynnig dwy.\n"
-"Mae 'r systemau'n addas gar gyfer ffurfweddiad arbennig.\n"
-"\n"
-" *\"%s\" - sy'n golygu \"print, do not queue\", yw'r dewis os oes gennych\n"
-"gysylltiad uniongyrchol â'ch argraffydd a'ch bod eisiau medru tynnu allan o "
-"waith\n"
-"argraffu pan fo'r papur wedi mynd yn sownd ac nad oes gennych argraffyddion\n"
-"wedi eu cysylltu drwy rwydwaith. (Dim ond rhwydweithiau syml mae \"%s\" yn "
-"ei\n"
-"drin ac mae'n araf ar rwydweithiau). Dewiswch \"pdq\" os mai dyma yw eich\n"
-"tro cyntaf yn GNU/Linux.\n"
-"\n"
-" *\"%s\" - \"Common Unix Printing System\". Mae hwn yn dda ar gyfer\n"
-"argraffu i argraffyddion lleol a hanner ffordd rownd y byd. Mae'n symlach, "
-"yn\n"
-"gallu gweithredu fel gwasanaethwr neu gleient ar gyfer yr hen system \"lpd"
-"\"\n"
-"ac felly mae'n cydweddi â'r systemau sydd wedi mynd o'i flaen. Mae'n gallu\n"
-"gwneud nifer o driciau, ond mae bron mor syml i'w osod  \"pdq\". Os ydych\n"
-"amgen hwn i efelychu gwasanaethwr \"lpd\", yna rhaid cychwyn aemon\n"
-"\"cups-lpd\". Mae gan \"%s\" wyneb graffigol ar gyfer argraffu dewis\n"
-"argraffydd neu reoli'r argraffu.\n"
-"\n"
-"\n"
-"Os ydych yn dewis yn awr ac yn ddiweddarach yn penderfynu eich bod\n"
-"am newid eich system argraffu gallwch ei newid drwy gyfrwng PrinterDrake\n"
-"yng Nghanolfan Rheoli Mandriva a chlicio'r botwm %s."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Arbenigwr"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"Bydd DrakX yn canfod unrhyw ddyfais IDE sydd ar eich cyfrifiadur. Bydd yn\n"
-"chwilio am un neu fwy o gardiau SCSI PCI ar eich system. Os oes Cerdyn\n"
-"SCSI'n cael ei ganfod bydd DrakX yn awtomatig yn gosod y gyrrwr priodol.\n"
-"\n"
-"Oherwydd nad yw canfod caledwedd bob tro'n canfod darn o galedwedd,\n"
-"gall DrakX fethu canfod eich disgiau caled. Os felly, bydd rhaid i chi "
-"bennu\n"
-"eich caledwedd â llaw.\n"
-"\n"
-"Os ydych wedi pennu eich addaswr PCI SCS gyda llaw, bydd DrakX yn\n"
-"gofyn i chi ydych am bennu dewisiadau ar ei gyfer. Dylech adael i DrakX "
-"ofyn\n"
-"i'r cerdyn am ddewisiadau penodol i'r cerdyn mae angen i'r caledwedd eu\n"
-"cychwyn. Mae hyn fel rheol yn gweithio'n dda\n"
-"\n"
-"Os nad yw DrakX yn gallu holi am y dewisiadau sydd eu hangen, bydd rhaid i\n"
-" chi ffurfweddu'r gyrrwr gyda llaw. "
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"\"%s\":  os yw cerdyn sain yn cael ei ganfod ar eich cyfrifiadur, bydd \n"
-"yn cael ei ddangos yma. Os ydych yn sylwi nad y cerdyn sain sydd ar eich\n"
-"cyfrifiadur sy'n cael ei ddangos, yna cliciwch ar y botwm a dewis\n"
-"gyrrwr arall."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Cerdyn sain"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"I grynhoi, bydd DrakX yn cyflwyno crynodeb o'r wybodaeth amrywiol\n"
-"sydd ganddo am eich system. Yn ddibynnol ar eich caledwedd, mae'n bosib\n"
-"bod gennych rywfaint o'r nodweddion canlynol. Mae pob cofnod yn cynnwys\n"
-"eitem ffurfweddadwy, a chrynodeb o'r ffurfweddiad presennol. Cliciwch ar y\n"
-"botwm \"%s\" perthnasol i'w newid.\n"
-"\n"
-" *\"%s\": gwirio ffurfweddiad map y bysellfwrdd a'i newid os oes angen.\n"
-"\n"
-" *\"%s\": gwirio'r dewis gwlad. Os nad ydych yn y wlad hon, cliciwch y "
-"botwm\n"
-"\"%s\" a dewis un arall. Os nad yw eich gwlad ar y rhestr gyntaf i'w\n"
-"dangos, cliciwch y botwm \"%s\"  am y rhestr gyflawn o wledydd.\n"
-"\n"
-"\n"
-" *\"%s\": Mae DrakX yn dyfalu eich parth amser yn ôl y wlad rydych\n"
-"wedi ei dewis. Mae modd clicio ar y botwm \"%s\" i'w gywiro.\n"
-"\n"
-" *\"%s\": gwirio ffurfweddiad y llygoden bresennol a chlicio ar y botwm\n"
-"i'w newid os oes angen.\n"
-"\n"
-" \"%s\": bydd clicio ar y botwm \"%s\" yn agor y dewin\n"
-"ffurfweddu argraffydd. Darllenwch y pennawd yn y \"Starter Guide\" ar\n"
-"sut i osod argraffydd newydd. Mae'r rhyngwyneb yn debyg i'r un ar gyfer\n"
-"ei osod yn y man cyntaf.\n"
-"\n"
-" *\"%s\": os oes cerdyn sain wedi ei ganfod ar eich system bydd\n"
-"yn cael ei ddangos yma.  Os ydych yn sylwi nad y cerdyn sain sy'n cael ei\n"
-"ddangos yw'r un sydd ar eich system, yna cliciwch y botwm a dewis\n"
-"gyrrwr arall.\n"
-"\n"
-" * \"%s\": os oes cerdyn teledu wedi ei ganfod ar eich system\n"
-"bydd yn cael ei ddangos yma. Os oes gennych gerdyn ac nid yw wedi cael\n"
-"ei ganfod, cliciwch \"%s\" i geisio ei ffurfweddu â llaw.\n"
-"\n"
-" * \"%s\": cliciwch ar \"%s\" i newid paramedrau cysylltiedig â'r cerdyn\n"
-"os yw'r ffurfweddiad yn anghywir.\n"
-"\n"
-" *\"%s\": fel rheol bydd DrakX yn gosod eich rhyngwyneb\n"
-"i gydraniad  \"800x600\" neu \"1024x768\". Os nad yw hyn yn addas ar\n"
-"eich cyfer cliciwch y botwm \"%s\" i'w newid.\n"
-" \n"
-" * \"%s\": os ydych am ffurfweddu eich mynediad i'r Rhyngrwyd neu\n"
-"eich rhwydwaith lleol, mae modd gwneud hynny. Darllenwch y deunydd\n"
-"ysgrifenedig neu ddefnyddio Canolfan Reoli Mandriva Linux wedi i'r gosod\n"
-"orffen i fanteisio ar gymorth ar-lein llawn.\n"
-"\n"
-" * \"%s\": os ydych am ffurfweddu cyfeiriadau dirprwyol HTTP ac FTP os\n"
-"yw'r peiriant rydych yn ei osod i fod tu nôl i weinydd dirprwyol.\n"
-"\n"
-" * \"%s\": mae modd ail ddiffinio'r lefel diogelwch a osodwyd yn\n"
-"flaenorol ().\n"
-"\n"
-" *\"%s\": mae'n syniad da gosod mur cadarn i'ch amddiffyn rhag\n"
-"ymyriadau os ydych yn bwriadu cysylltu eich cyfrifiadur â'r Rhyngrwyd.\n"
-"Darllenwch y bennod berthnasol yn y \"Starter Guide\" am fanylion\n"
-"gosodiadau mur cadarn.\n"
-"\n"
-" * \"%s\": os hoffech newid ffurfweddiad eich cychwynnwr\n"
-"cliciwch y botwm yma. Ar gyfer defnyddwyr profiadol. Darllenwch y\n"
-"deunydd ysgrifenedig  neu'r cymorth ar-lein am ffurfweddiad\n"
-"cychwynwyr yng Nghanolfan Rheoli Mandriva Linux.\n"
-"\n"
-" *\"%s\": yma bydd modd i chi wneud man newidiadau i'r\n"
-"gwasanaethau sy'n cael eu rhedeg ar eich cyfrifiadur. Os ydych yn\n"
-" bwriadu defnyddio'r cyfrifiadur fel gwasanaethwr mae'n syniad da\n"
-"darllen y gosodiadau'n fanwl."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Cylchfa amser"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "Cerdyn Teledu"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "Cerdyn ISDN"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Rhyngwyneb Graffigol"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Rhwydwaith"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Dirprwyon"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Lefel Diogelwch"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Mur Cadarn"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Cychwynnwr ar waith"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Gwasanaethau"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Dewiswch y ddisg galed rydych am ei ddileu er mwy n gosod eich rhaniad\n"
-"Mandriva Linux newydd. Byddwch ofalus, bydd yr holl ddata sydd arno'n\n"
-"cael ei ddileu ac ni fydd modd ei adfer!"
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Cliciwch \"%s\" os ydych am ddileu'r holl ddata a rhaniadau sy'n bresennol\n"
-"ar y disg. Byddwch ofalus, wedi i chi glicio \"%s\" ni fydd modd i chi\n"
-"adfer unrhyw ddata na rhaniadau presennol ar y disg caled, gan gynnwys\n"
-"data Windows.\n"
-"\n"
-"Cliciwch \"%s\" i atal y weithred hon heb golli unrhyw ddata\n"
-"a rhaniadau sy'n bresennol ar y ddisg galed."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Nesaf ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Blaenorol"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Methu cael mynediad i modiwlau'r cnewyllyn sy'n cyfateb i'ch cnewyllyn chi "
-"(mae ffeil %s ar goll), mae hyn yn golygu, fel arfer, nad yw eich disg "
-"cychwyn yn cydweddu gyda'r cyfrwng Gosod (crëwch ddisg cychwyn meddal newydd)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Rhaid fformatio %s hefyd"
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Oes gennych unrhyw gyfrwng ychwanegol arall?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-"Mae'r cyfrwng canlynol wedi eu canfod ac yn cael eu defnyddio yn ystod y "
-"gosod: %s.\n"
-"\n"
-"\n"
-"A oes gennych unrhyw gyfrwng gosod arall i'w ffurfweddu?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "Rhwydwaith (http)"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "Rhwydwaith (ftp)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "Rhowch y CD-ROM (eto)"
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Heb ganfod dyfais"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "Rhowch y CD-ROM"
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Methu gosod CD-ROM"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "URL y drych?"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Methu canfod ffeil hdlist ar y drych"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Newidiwch eich CD-ROM\n"
-"\n"
-"Rhowch y CD-ROM \"%s\" yn eich gyrrwr a chlicio Iawn ar ôl gorffen"
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr "Copïo ar waith"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Rydych wedi dewis y gweinydd(wyr) canlynol: %s\n"
-"\n"
-"\n"
-"Mae'r gweinyddion canlynol yn cael eu cychwyn drwy ragosodiad. Does\n"
-"ganddynt unrhyw faterion diogelwch hysbys, ond mae'n bosibl i rai ddod i'r\n"
-"golwg. Os felly rhaid uwchraddio gynted ag y bo modd\n"
-"\n"
-"Ydych chi wir eisiau gosod y gweinyddion hyn?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Bydd y pecynnau canlynol yn cael eu tynnu i ganiatáu diweddaru eich system: %"
-"s\n"
-"\n"
-"\n"
-"Ydych chi am dynnu'r pecynnau hyn?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Gwall wrth ddarllen ffeil %s"
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Mae'r disg(iau) hyn wedi eu hailenwi:"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr "%s (ei enw blaenorol oedd %s)"
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Digwyddodd gwall - ni chafwyd dyfeisiau dilys i greu systemau ffeil arnynt. "
-"Gwiriwch eich caledwedd am ffynhonnell yr anhawster."
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr "Dewiswch gyfrwng"
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr "Cyfrwng drwg %s"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Mae'r ffeil yn bodoli eisoes. Ysgrifennu drosti?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Meth creu lluniau o'r sgrin cyn rhannu"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Bydd lluniau o'r sgrin ar gael ar ôl gosod yn %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Gosod y system"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Ffurfweddu'r system"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Mae peth caledwedd ar eich cyfrifiadur angen gyrwyr \"priodol\" i weithio.\n"
-"Mae rhywfaint o wybodaeth i'w gael amdanynt yn %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Rhaid bod gennych raniad gwraidd.\n"
-"Crëwch raniad (neu glicio ar un presennol)\n"
-"Yna dewiswch weithred \"Pwynt Gosod\" a'i osod i `/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Nid oes gennych raniad cyfnewid\n"
-"\n"
-"Parhau beth bynnag?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Rhaid bod gennych raniad FAT wedi ei osod yn /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nid oes digon o le i ddynodi rhaniadau newydd"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Defnyddiwch y rhaniadau cyfredol"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Nid oes rhaniad cyfredol i'w ddefnyddio"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Defnyddiwch raniad Windows ar gyfer cylchol"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Pa raniad hoffech chi ei ddefnyddio ar gyfer Linux4Win?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Dewiswch y maint"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Maint rhaniad gwraidd mewn MB :"
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Maint rhaniad cyfnewid mewn MB: "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Nid oes rhaniadau FAT i'w defnyddio fel cylchol (neu nad oes digon o le ar "
-"ôl)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Pa raniad ydych chi am newid ei faint?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"Nid yw'r newidiwr maint FAT yn gallu trin eich rhaniad.\n"
-"digwyddodd y gwall canlynol: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Cyfrifo maint rhaniad Windows"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Mae eich rhaniad Windows yn rhy ysgyriog, rhedwch \"defrag\" yn gyntaf o dan "
-"Windows ac yna ailgychwyn gosodi Mandriva Linux."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"RHYBUDD!\n"
-"\n"
-"Bydd DrakX yn newid maint eich rhaniad Windows. Byddwch\n"
-"ofalus: mae gwneud hyn yn beryglus. Os nad ydych wedi\n"
-"gwneud yn barod, dylech fynd allan o'r gosod, rhedeg\n"
-"\"chkdsk c:\" o'r Annogwr yn Windows (byddwch ofalus nid \n"
-"yw rhedeg \"scandisk\" yn ddigon, gwnewch yn siŵr i ddefnyddio \n"
-"\"chkdsk\" o fewn Anogwr!), hefyd, defnyddiwch defrag ac ail\n"
-"gychwyn gosod. Dylech hefyd wneud copi wrth gefn\n"
-"o'ch data. Pan rydych yn siŵr, cliciwch Iawn."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Pa faint o le ydych am ei gadw ar gyfer Windows ar"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "rhaniad %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Mesur ffiniau system ffeilio Windows"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Methodd newid maint FAT: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Nid oes rhaniadau FAT i newid eu maint (neu nad oes digon o le ar ôl)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Tynnu Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Mae gennych fwy nag un disg caled, ar ba un ydych am osod linux?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Bydd pob rhaniad a'u data yn cael ei ddileu ar ddisg %s"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Defnyddiwch fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Gallwch rannu %s\n"
-"Wedi gorffen, peidiwch anghofio cadw gyda 'w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Methu canfod lle ar gyfer gosod"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Daeth dewin Rhannu DrakX o hyd i'r atebion canlynol:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Methodd rhannu: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Cychwyn y rhwydwaith"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Cau'r rhwydwaith"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Cyflwyniad\n"
-"\n"
-"Bydd y system weithredu a'r cydrannau gwahanol sydd o fewn dosbarthiad "
-"Mandriva Linux yn\n"
-"cael eu galw yn \"Gynnyrch Meddalwedd\" o hyn ymlaen. Mae'r Cynnyrch "
-"Meddalwedd yn\n"
-"cynnwys, ond heb eu cyfyngu, i'r  casgliad o raglenni , dulliau, rheolau a "
-"dogfennau mewn\n"
-"perthynas â'r system weithredu a chydrannau gwahanol ddosbarthiad Mandriva "
-"Linux.\n"
-"\n"
-"\n"
-"1. Cytundeb Trwyddedu\n"
-"\n"
-"Darllenwch y ddogfen hon yn ofalus. Mae'r ddogfen hon yn gytundeb trwyddedu "
-"rhyngoch\n"
-"chi â Mandriva S.A,. sy'n berthnasol i'r Cynnyrch Meddalwedd.\n"
-"\n"
-"Wrth osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn unrhyw fodd, "
-"rydych yn\n"
-"amlwg yn derbyn ac yn llawn cytuno i gadw at delerau ac amodau'r Drwydded "
-"hon.\n"
-"Os ydych yn anghytuno ag unrhyw ran o'r cytundeb, ni chewch ganiatâd i osod, "
-"dyblygu\n"
-"neu ddefnyddio'r Cynnyrch Meddalwedd.\n"
-"Bydd unrhyw ymgais i osod, dyblygu neu ddefnyddio'r Cynnyrch Meddalwedd mewn "
-"modd\n"
-"\n"
-"nad yw'n cyd-fynd â thelerau ac amodau'r Drwydded yn ddi-rym a bydd yn "
-"terfynu eich\n"
-"hawliau o dan y Drwydded hon. Ar ddiwedd y Drwydded, rhaid i chi "
-"ddinistrio'n syth pob\n"
-"copi o'r Cynnyrch Meddalwedd.\n"
-"\n"
-"\n"
-"2. Gwarant Gyfyngedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd a'r ddogfennaeth gysylltiedig yn cael eu darparu "
-"\"fel ag y maent\",\n"
-"heb ddim gwarant,\n"
-"hyd y mae'r gyfraith yn caniatáu.\n"
-"Ni fydd Mandriva S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd ag y "
-"bydd y gyfraith yn\n"
-"caniatáu,  am unrhyw iawn o gwbl,\n"
-"arbennig, damweiniol, uniongyrchol neu anuniongyrchol (gan gynnwys heb "
-"gyfyngu ar iawndal\n"
-"am golli busnes, tarfu ar fusnes, colled ariannol, costau cyfreithiol, a "
-"chosb o ganlyniad i achos llys,\n"
-"neu unrhyw golled o ganlyniad) yn codi o'r defnydd neu'r anallu i "
-"ddefnyddio'r Cynnyrch Meddalwedd,\n"
-"hyd yn oed os yw Mandriva wedi eu cynghori o'r posibilrwydd o'r fath iawn.\n"
-"\n"
-"CYFRIFOLDEB CYFYNGEDIG YN GYSYLLTIEDIG GYDA'R MEDDIANT NEU'R DEFNYDD O "
-"FEDDALWEDD\n"
-" GWAHARDDEDIG MEWN RHAI GWLEDYDD\n"
-"\n"
-"Ni fydd Mandriva S.A. yn gyfrifol, o dan unrhyw amgylchiad, a chyhyd y bydd "
-"y gyfraith yn caniatáu,\n"
-"i fod yn atebol am unrhyw iawn o gwbl, arbennig, damweiniol, uniongyrchol "
-"neu anuniongyrchol (gan gynnwys\n"
-"heb gyfyngu ar iawndal am golli busnes, tarfu ar fusnes, colled ariannol, "
-"costau cyfreithiol, a chosb o ganlyniad\n"
-"i achos llys, neu unrhyw golled o ganlyniad) yn codi o lwytho i lawr "
-"cydrannau meddalwedd o un o safleoedd\n"
-" Mandriva Linux, sydd wedi eu gwahardd neu eu hatal mewn rhai gwledydd gan "
-"gyfreithiau lleol. Mae'r\n"
-"cyfrifoldeb cyfyngedig hwn yn perthyn i , ond heb ei gyfyngu i'r, cydrannau "
-"cryptograffiaeth cryf sy'n cael\n"
-"eu cynnwys o fewn y Cynnyrch Meddalwedd.\n"
-"\n"
-"\n"
-"3. Trwydded GPL a Thrwyddedau Cysylltiedig\n"
-"\n"
-"Mae'r Cynnyrch Meddalwedd yn cynnwys cydrannau sydd wedi eu creu gan "
-"bersonau a endidau gwahanol.\n"
-"Mae'r rhan fwyaf o'r cydrannau hyn yn cael eu llywodraethu gan dermau ac "
-"amodau Trwydded Gyhoeddus\n"
-"Cyffredinol (General Public Licence (GPL)), GNU, fydd yn cael ei gyfeirio "
-"ato  o hyn ymlaen fel \"GPL\", neu\n"
-"drwyddedau cyffelyb. Mae'r rhan fwyaf o'r trwyddedau'n caniatáu i chi "
-"ddefnyddio, dyblygu, addasu neu\n"
-" ailddosbarthu'r cydrannau maent yn eu cynnwys. Darllenwch delerau ac amodau "
-"trwydded pob cydran cyn\n"
-"eu defnyddio. Dylai pob cwestiwn am drwydded cydran gael ei ofyn i awdur y "
-"gydran ac nid i Mandriva.\n"
-"Mae'r rhaglenni a ddatblygwyd gan Mandriva yn cael eu llywodraethu o dan "
-"Drwydded GLP. Mae'r dogfennau\n"
-" ysgrifennwyd gan Mandriva S.A. yn cael eu llywodraethu gan drwydded "
-"benodol. Darllenwch y dogfennau\n"
-"am fwy o fanylion.\n"
-"\n"
-"\n"
-"4. Hawliau Eiddo Deallusol\n"
-"\n"
-"Mae pob hawl cydrannau'r Cynnyrch Meddalwedd yn perthyn i'w hawduron "
-"perthnasol ac wedi eu hamddiffyn\n"
-"gan gyfreithiau eiddo deallusol a hawlfraint sy'n berthnasol i raglenni "
-"meddalwedd. Mae Mandriva yn cadw\n"
-"ei hawl i newid neu addasu ei Gynnyrch Meddalwedd, yn rhannol neu yn gyfan, "
-"drwy unrhyw ddull ac ar gyfer\n"
-"unrhyw bwrpas.\n"
-"Mae \"Mandriva\", \"Mandriva Linux\"  a'r logos cysylltiedig yn nodau "
-"masnachol sy'n perthyn i Mandriva S.A.\n"
-"\n"
-"\n"
-"5. Cyfreithiau Llywodraethol\n"
-"\n"
-"Os bydd unrhyw ran o'r cytundeb hwn yn cael ei ddal yn ddi-rym, "
-"anghyfreithlon neu amherthnasol gan\n"
-"benderfyniad llys, bydd y rhan yma'n cael ei dynnu o'r cytundeb hwn. Byddwch "
-"yn parhau i fod yn rhwymedig\n"
-"i adrannau cymwys o'r cytundeb.\n"
-"Mae telerau ac amodau'r Drwydded hon yn cael eu llywodraethu gan Gyfreithiau "
-"Ffrainc. Mae'n ddymunol y\n"
-"bydd pob anghytundeb ar amodau'r drwydded yn cael eu datrys y tu allan i'r "
-"llys. Fel cam olaf, bydd yr anghytundeb yn cael ei drosglwyddo i'r Llysoedd "
-"Barn, Paris - Ffrainc. Am unrhyw gwestiwn ynghylch y ddogfen hon cysylltwch "
-"â Mandriva S.A.  \n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"Rhybudd: Mae'n bosibl nad yw Meddalwedd Rhad yn rhydd o batent, ac mae\n"
-"peth Meddalwedd Rhad wedi ei gyfyngu â phatent yn eich gwlad, e.e. gall\n"
-"amgodwyr MP3 fod angen trwydded ar gyfer defnydd pellach\n"
-"(gw. http://www.mp3licensing.com am wybodaeth bellach. Os nad ydych yn\n"
-"siŵr os yw'r patent yn berthnasol i chi, gwiriwch eich cyfreithiau lleol."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-" Rhybudd\n"
-"\n"
-"Darllenwch yr amodau isod yn ofalus. Os ydych yn anghytuno gydag unrhyw\n"
-" ddarn, nid oes caniatâd i chi osod y cyfrwng CD nesaf. Pwyswch 'Gwrthod' i\n"
-" barhau'r gosodiad heb ddefnyddio'r cyfryngau hyn.\n"
-"\n"
-"Nid yw rhai cydrannau ar y CDau canlynol yn cael eu rheoli gan Drwydded GPL\n"
-" neu gytundebau tebyg. Mae'r cydrannau hynny'n cael eu rheoli gan dermau ac\n"
-" amodau ei drwydded benodol ei hun. Darllenwch yn ofalus a chadwch at y\n"
-" trwyddedau penodol cyn defnyddio neu ddosbarthu'r cydrannau hynny.\n"
-"\n"
-"Mae'r trwyddedau hynny'n atal yn gyffredinol, drosglwyddiad, dyblygu (ar "
-"wahan i\n"
-" bwrpas cadw wrth gefn), dosbarthu, cildroi peirianyddol, dadcydosod,\n"
-" dad-grynhoi neu newid y cydrannau. Bydd unrhyw dorri ar yr amodau hyn yn\n"
-"terfynu eich hawl  o dan y drwydded benodol. Oni bai ei fod yn rhoi'r hawl i "
-"chi,\n"
-"nid oes modd i chi osod y rhaglenni ar fwy nag un system na'i addasu ar "
-"gyfer\n"
-" defnydd ar rwydwaith. Os oes amheuaeth, cysylltwch yn uniongyrchol â\n"
-"dosbarthwr neu olygydd y cydrannau hynny.\n"
-"Mae trosglwyddo i drydydd parti neu gopïo'r cydrannau hynny gan gynnwys y\n"
-" ddogfennaeth, wedi ei wahardd fel rheol\n"
-"\n"
-"Mae pob hawl i gydrannau'r cyfrwng CD nesaf yn perthyn i' hawduron "
-"perthnasol\n"
-" ac maent wedi eu hamddiffyn drwy gyfreithiau eiddo deallusol a hawlfraint "
-"sy'n\n"
-" berthynol i raglenni meddalwedd.\n"
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Llongyfarchiadau, mae'r gosod wedi ei gwblhau.\n"
-"Tynnwch y cyfrwng cychwyn a chlicio Ailgychwyn.\n"
-"\n"
-"\n"
-"Am wybodaeth am gywiriadau sydd ar gael ar gyfer y rhyddhad hwn o Mandriva "
-"Linux,\n"
-"cysylltwch â'r atodiad, sydd i'w gael yn:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Mae gwybodaeth ar ffurfweddu eich system ar gael ym mhenawdau ôl osod\n"
-"yr Official Mandriva Linux User's Guide."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Pwynt gosod dyblyg %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Methodd rhai pecynnau pwysig a chael eu gosod yn gywir.\n"
-"Un ai mae eich disg CD-ROM neu eich CD-ROM yn wallus.\n"
-"Gwiriwch y CD-ROM ar gyfrifiadur wedi ei osod gan ddefnyddio \"rpm -qpl "
-"media/main/*.rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Cychwyn cam '%s\"\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Dewis  y Grŵp Pecyn"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Cyfanswm maint: %d/%d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Pecyn gwallus"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Fersiwn:"
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Maint:"
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Pwysigrwydd: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Does dim modd i chi ddewis/dad-ddewis y pecyn"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "oherwydd %s coll"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "oherwydd %s annigonol"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "ceisio hyrwyddo %s"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "er mwyn cadw %s"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr "Nid oes modd i chi ddewis y pecyn hwn - does dim lle ar ôl i'w osod"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Mae'r pecynnau canlynol i'w gosod"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Bydd y pecynnau canlynol yn cael eu tynnu"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Mae hwn yn becyn hanfodol, does dim modd ei ddad-ddewis"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Does dim mod dad-ddewis y pecyn, mae wedi ei osod yn barod"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Rhaid i'r pecyn gael ei uwchraddio\n"
-"Ydych chi'n siŵr eich bod am ei ddad-ddewis?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Does dim mod dad-ddewis y pecyn hwn. Rhaid ei ddiweddaru"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Dangoswch y pecynnau dewis awtomatig"
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "Llwytho/Cadw'r dewis"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Diweddaru'r dewis pecynnau"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Gosodiad lleiaf"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Dewiswch y pecynnau hoffech chi eu gosod"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Gosod"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Amcangyfrif"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Dim manylion"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Amser yn weddill"
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Arhoswch, paratoi i osod"
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d pecyn"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Gosod pecynnau %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Gwrthod"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Newidiwch eich CD-ROM\n"
-"\n"
-"Rhowch y CD-ROM \"%s\" yn eich gyrrwr a chlicio Iawn ar ôl gorffen\n"
-"Os nad yw gennych, cliciwch Dileu i osgoi gosod o'r CD-ROM hon."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Roedd gwall wrth drefnu pecynnau"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Mynd yn ein blaen beth bynnag?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Digwyddodd gwall wrth osod pecyn"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "heb ffurfweddu"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-"Mae'r cyfrwng gosod canlynol wedi ei ganfod.\n"
-"Os hoffech hepgor rhai ohonynt, dad-ddewiswch nhw nawr."
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-"Mae gennych y dewis i gopîo cynnwys y CD ar i'r disg caled cyn gosod "
-"Mandriva Linux.\n"
-"Bydd yna'n parhau o'r disg caled a bydd y pecynnau ar gael unwaith i'r "
-"system gael ei osod yn gyflawn."
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr "Copïo'r CDau cyfan"
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Cytundeb trwyddedu"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr "Nodiadau Ryddhau"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Dewiswch gynllun eich bysellfwrdd"
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Dyma restr lawn o'r bysellfyrddau sydd ar gael"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Gosod/Diweddaru"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Gosod neu ddiweddaru?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Diweddaru %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Allwedd amgryptio ar gyfer %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Dewiswch fath eich llygoden"
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Porth Llygoden"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Dewiswch ba  borth cyfresol mae eich llygoden wedi cysylltu iddi"
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Efelychiad botymau"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Efelychiad Botwm 2"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Efelychiad Botwm 3"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Ffurfweddu cardiau PCMCIA..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Ffurfweddu IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "dim rhaniadau ar gael"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Sganio rhaniadau i ganfod pwyntiau gosod"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Dewiswch y pwyntiau gosod"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Nid oes lle rhydd ar gyfer yr ymlwythwr 1MB! Bydd y gosodiad yn parhau, ond "
-"i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn DiskDrake"
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Bydd angen i chi greu llwythwr mwdwl PPC PReP Boot! Bydd y gosodiad yn "
-"parhau, ond i gychwyn y system bydd rhaid i chi greu rhaniad ymlwythwr yn "
-"DiskDrake"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Dewiswch y rhaniadau rydych am eu fformatio"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Gwirio blociau gwallus?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Wedi methu gwirio system ffeiliau %s. Hoffech chi drwsio'r gwallau? (gofal, "
-"mae modd colli data)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Dim digon o le cyfnewid i gyflawni'r gosodiad, ychwanegwch ragor"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr ""
-"Chwilio am y pecynnau sydd ar gael ac yn ailadeiladu cronfa ddata rpm..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Casglu'r pecynnau sydd ar gael"
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Edrych ar becynnau wedi eu gosod yn barod"
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Canfod pecynnau i'w uwchraddio"
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Dewiswch ddrych lle mae modd estyn y pecynnau"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Nid oes gan eich system ddigon o le ar ôl ar gyfer gosodiad neu uwchraddiad "
-"(%d> %d)"
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Dewiswch lwytho neu gadw pecyn dewiswyd.\n"
-"Mae'r fformat yr un â ffeiliau cynhyrchwyd drwy auto_install."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Llwyth"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Gorffen"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "Ffeil drwg"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Mae'r maint a ddewiswyd yn fwy na'r lle ar gael"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Math o osodiad"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Nid ydych wedi dewis unrhyw grwpiau o becynnau.\n"
-"Dewiswch y gosodiad lleiaf rydych ei eisiau"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Gyda dogfennaeth elfennol (argymhellir!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Gosodiad bychan iawn (yn arbennig dim urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Popeth"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Os yw'r holl CDau sydd yn y rhestr gennych, cliciwch Iawn.\n"
-"Os nad oes gennych un ohonynt, Cliciwch Diddymu.\n"
-"Os mae dim ond rhai CDau sydd ar goll, yna cliciwch Iawn."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom wedi ei labelu \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Paratoi'r gosodiad"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Gosod pecyn %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Ffurfweddiad ôl osod"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr "Gwnewch yn siŵr fod cyfrwng Diweddaru Modiwlau yng ngyrrwr %s"
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"Mae'n bosibl i chi llwytho i lawr y pecynnau diweddaraf sydd wedi eu\n"
-"ryddhau ers i'r dosbarthiad fod ar gael. Efallai bod gwallau a materion "
-"diogelwch wedi eu cywiro\n"
-"\n"
-"I lwytho'r pecynnau i lawr, bydd angen cyswllt gweithredol\n"
-"â'r Rhyngrwyd.\n"
-"\n"
-"Ydych chi am osod y diweddariadau?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Cysylltu â'r drych i estyn y rhestr o becynnau sydd ar gael"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Methu canfod drych: %s."
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Hoffech chi geisio eto?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Pa un yw eich parth amser?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Cydweddi amser awtomatig (defnyddio NTP)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "Gweinydd NTP"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Crynodeb"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "System"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Caledwedd"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Gweinydd CUPS pell"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Nid oes argraffydd"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "A oes gennych gerdyn sain ISA?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Rhedwch \"alsaconfig\" neu \"sndconfig\" wedi'r gosodiad i ffurfweddu'ch "
-"cerdyn sain"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Heb ganfod cerdyn sain. Ceisiwch \"harddrake\" wedi'r gosodiad"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Rhyngwyneb graffigol"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Rhwydwaith a'r Rhyngrwyd"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "ffurfweddu"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Diogelwch"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "gweithredu"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "anablwyd"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Cychwyn"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s ar %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Gwasanaethau: %d wedi eu cychwyn ar gyfer %d wedi eu cofrestru"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Nid ydych wedi ffurfweddu X. Ydych chi'n siŵr eich bod am wneud hyn?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Paratoi cychwynnwr"
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Mae'n ymddangos fod gennych beiriant OldWorld neu Anhysbys ac ni fydd "
-"cychwynnydd yaboot yn gweithio ar eich cyfer Bydd y gosodiad yn parhau ond "
-"bydd rhaid defnyddio BootX i gychwyn eich peiriant. Ymresymiad y cnewyllyn "
-"ar gyfer y gwraidd yw: root=%s"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Ydych chi eisiau defnyddio aboot?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Gwall gosod aboot, \n"
-"ceisiwch orfodi gosodiad hyd yn oed os yw hynny'n dinistrio'r rhaniad cyntaf?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"Ar y lefel diogelwch yma, mae mynedfa i ffeiliau yn rhaniad Windows wedi eu "
-"cyfyngu i'r Gweinyddwr."
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Rhowch ddisg meddal  yng ngyrrwr %s"
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Mewnosodwch ddisg meddal arall ar gyfer gyrwyr disg"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Creu disg meddal awto gosod"
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nid yw rhai camau wedi eu cwblhau.\n"
-"\n"
-"Ydych chi wir eisiau gorffen?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Mae modd awtomeiddio'r awto gosod, os hoffech\n"
-"chi, yn yr achos hwnnw bydd yn cymryd drosodd y\n"
-"disg caled!!\n"
-"(mae hyn ar gyfer gosod ar flwch arall).\n"
-"\n"
-"Efallai byddai'n well gennych ai osod y gosodiad.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> rhwng elfennau  | <Space> yn dewis | <F12> y sgrin nesaf "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Dewis ffeil"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Ychwanegu"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Newid"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Tynnu"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Elfennol"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Gorffen"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Gwneud"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Dewis gwael, ceisiwch eto\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Eich dewis? (rhagosodedig %s)"
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Gwybodaeth i'w gyflwyno:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Eich dewis? (0/1, rhagosodedig %s)"
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Botwm '%s'.%s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Ydych chi eisiau clicio ar y botwm hwn?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Eich dewis? (rhagosodedig `%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr "rhowch 'gwag' am gofnod gwag"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Mae yna lawer i ddewis o (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Dewiswch y rhif cyntaf o'r amrediad 10 rydych am ei olygu,\n"
-"neu bwyswch Enter i barhau.\n"
-"Eich dewis?"
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=>Hysbysiad, mae label wedi newid:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Ail-gyflwyno"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Tsiec (QWERTY)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Almaenaidd"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Sbaenaidd"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Ffinnaidd"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Ffrengig"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norwyaidd"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Pwylaidd"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Rwsiaidd"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Swedaidd"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "Bysellfwrdd DG"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "Bysellfwrdd UDA"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albaniaidd"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Armenaidd (hen)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Armenaidd (teipiadur)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Armenaidd (ffonetig)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Arabaidd"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Azerbaidjan (lladin)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belgaidd"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bengalaidd (gosodiad Inscript)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bengalaidd (gosodiad Probhat)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bwlgaraidd (ffonetig)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bwlgaraidd (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brasilaidd (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosniaidd"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Belarusaidd"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Swisaidd (gosodiad Almaeneg)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Swisaidd (gosodiad Ffrengig)"
-
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "sillafog Cherokee"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Tsiec (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Almaenaidd (dim bysellau marw)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanagari"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Danaidd"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (UDA)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Esperanto)"
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Ffrengig)"
-
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (DG)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Norwyaidd)"
-
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (Pwylaidd)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (Swedaidd)"
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Dzongkha/Tibetaidd"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estonaidd"
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Ffaroaidd"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Georgaidd (gosodiad \"Rwsiaidd\")"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Georgaidd (gosodiad \"Lladinaidd\")"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Groegaidd"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Groegaidd (polytonic)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Gujarati"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Gurmukhi"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Croataidd"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Hwngaraidd"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Gwyddelig"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Israelaidd"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Israelaidd (Ffonetig)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Iranaidd"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Eislandaidd"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Eidalaidd"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Inuktitut"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Siapaëaidd 106 bysell"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kannada"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Bysellfwrdd Corëaidd"
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Cwrdaidd (sgript arabaidd)"
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Bysellfwrdd Kyrgyz"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Lladin America"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laotiaidd"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Lithuenaidd AZERTY (hen)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Lithuenaidd AZERTY (newydd)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Lithuenaidd \"rhes rhif\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Lithuenaidd \"ffonetig\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Latfiaidd"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malayalamaidd"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Macedonaidd"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Myanmar (Burma)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongolaidd (cyrillic)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Maltaidd (DU)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Maltaidd (UDA)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Isalmaenaidd"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Oriya"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Pwylaidd (gosodiad qwerty)"
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Patsho"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portiwgalaidd"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Canada (Quebec)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Romanaidd (qwertz)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Romanaidd (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Rwsiaidd (Ffonetig)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Saami (norwyaidd)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Saami (Swedaidd/Ffinaidd)"
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Sindhi"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Slfenaidd"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-"_: keyboard\n"
-"Sinhala"
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slofacaidd (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slofacaidd (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Serbaidd (cyrilig)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Syriaidd"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Syriaidd (ffonetig)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telugu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamil (cynllun TSCII)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamil (cynllun teipiadur)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Thai (Kedmanee)"
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Thai (TIS-820)"
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Thai (Pattachote)"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-"_: keyboard\n"
-"Tifinagh (cynllun moroccot) (+lladin/arabeg)"
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-"_: keyboard\n"
-"Tifinagh (phonetig) (+lladin/arabeg)"
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Bysellfwrdd Tajig"
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Turkmen"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Twrcaidd (model traddodiadol \"F\")"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Twrcaidd (model modern \"Q\")"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Wcranaidd"
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "bysellfwrdd Urdu"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "Bysellfwrdd UDA (rhyngwladol)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Uzbekaidd (Cyrilig)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Fietnamëaidd \"rhes rhifol\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Iwgoslafaidd (lladin)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Bysell Alt dde"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Y ddwy fysell Shift gyda'i gilydd"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Bysellau Control a Shift gyda'i gilydd"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "Bysell CapsLock"
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Bysellau Shift ac CapsLock gyda'i gilydd"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Bysellau Ctrl ac Alt gyda'i gilydd"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Bysellau Alt a Shift  gyda'i gilydd"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Bysell \"Dewislen\""
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Bysell \"Windows\" chwith"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Bysell \"Windows\" de"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Y ddwy fysell Control gyda'i gilydd"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Y ddwy fysell Alt gyda'i gilydd"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Bysell Shift chwith"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Bysell Alt dde"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Bysell Alt chwith"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Bysell Control chwith"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Bysell Control dde"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Yma gallwch ddewis y fysell neu gyfuniad o fysellau fydd yn\n"
-"caniatáu newid rhwng bysellfyrddau gwahanol (e.e.: lladin neu\n"
-"arall)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"Bydd y gosodiad yn dod i rym wedi'r gosod.\n"
-"Yn ystod y gosod, bydd angen i chi ddefnyddio'r fysell\n"
-"Crtl de i newid rhwng bysellfyrddau cynllun gwahanol."
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andorra"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "United Arab Emirates"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua a Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albania"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Armenia"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Netherlands Antilles"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antarctica"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Yr Ariannin"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "American Samoa"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbaijan"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnia ac Herzegovina"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbados"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bwlgaria"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benin"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei Darussalam"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Ynys Bouvet"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Botswana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Belarus"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Belize"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Ynysoedd Cocos (Keeling)"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Gweriniaeth Canol Affrica"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Cote d'Ivoire"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Ynysoedd Cook"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Chile"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Cameroon"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Tsieina"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Colombia"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Serbia a Montenegro"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Ciwba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Cape Verde"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Ynys Christmas"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Cyprus"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominican Republic"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Algeria"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Yr Aifft"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Western Sahara"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Ethiopia"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Ffiji"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Ynysoedd y Falkland (Malvinas)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Micronesia"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Ynysoedd Faroe"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gabon"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Y Deyrnas Unedig"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenada"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Georgia"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "French Guiana"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Ghana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Greenland"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gambia"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Guinea"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Equatorial Guinea"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "De Georgia ac Ynysoedd De Sandwich"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Guam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Guyana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Tsiena (Hong Kong)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard a McDonald Islands"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Croatia"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haiti"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonesia"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "India"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "British Indian Ocean Territory"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Irac"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Iran"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Ynys yr Iâ"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Yr Iorddonen"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenya"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kyrgyzstan"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Cambodia"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Comoros"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts a Nevis"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Corea (Gogledd)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Corea"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Cayman Islands"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Libanus"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Saint Lucia"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Liberia"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Lithuania"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Luxembourg"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Latfia"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Libya"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Morocco"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monaco"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldova"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagascar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Ynysoedd Marshall"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Macedonia"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongolia"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Ynysoedd Gogledd Mariana"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martinique"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Mauritania"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malta"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Maldives"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malawi"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Mecsico"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mozambique"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibia"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Caledonia Newydd"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Niger"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Ynys Norfolk"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepal"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauru"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Oman"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panama"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Periw"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Polynesia Ffrengig"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua New Guinea"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Philippines"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pacistan"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Saint Pierre a Miquelon"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palestina"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palau"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Qatar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Reunion"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Rwmania"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Arabia"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Ynysoedd Solomon"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Seychelles"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Swdan"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapore"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Saint Helena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Slovenia"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Ynysoedd Svalbard a Jan Mayen"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senegal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somalia"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Suriname"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome a Principe"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Syria"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Ynysoedd Turks a Caicos"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Chad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "French Southern Territories"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tajikistan"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Dwyrain Timor"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunisia"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tonga"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Twrci"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad a Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Wcráin"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Uganda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Fatican"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Saint Vincent a'r Grenadines"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virgin Islands (British)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virgin Islands (U.S.)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Fietnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis a Futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoa"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Yemen"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zambia"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "Mae angen un o'r pecynnau canlynol i osod %s:"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Croeso i %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Gosodiadau cylch %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Tynnu'r cyfrolau rhesymegol yn gyntaf\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Paramedrau"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "NONE"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Ffurfweddiad modiwl"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Mae modd i chi ffurfweddu pob paramedr o'r modiwl yma"
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Wedi canfod rhyngwynebau %s"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Oes gennych un arall?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Oes gennych unrhyw ryngwyneb %s?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Gweler gwybodaeth am galedwedd"
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr "Gosod gyrrwr gyfer rheolwr USB"
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Gosod gyrrwr gyfer rheolwr firewire %s "
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Gosod gyrrwr gyfer rheolwr disg caled %s "
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Gosod gyrrwr gyfer rheolwr ethernet %s "
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Gosod gyrrwr %s ar gyfer cerdyn %s "
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(modiwl %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Gallwch ddarparu ddewisiadau i fodiwl %s.\n"
-"Sylwer: wrth greu unrhyw gyfeiriad bydd angen defnyddio rhagddodiad 0x, e.e. "
-"'0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Gallwch nawr ei ddewis i fodiwl. %s.\n"
-"Mae'r dewisiadau yn fformat ``name=value name2=value2 ...''.\n"
-"e.e, ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Dewisiadau modiwl:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Pa yrrwr %s ddylwn drio?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Mewn rhai achosion, mae gyrrwr %s angen gwybodaeth ychwanegol i weithio'n\n"
-"gywir, er fel rheol mae'n gweithio'n iawn hebddo. Hoffech chi enwi'r "
-"dewisiadau\n"
-"ychwanegol ar ei gyfer neu adael i'r gyrrwr archwilio'r peiriant am y "
-"wybodaeth mae\n"
-"ei angen? Weithiau bydd yr archwilio'n atal y peiriant, ond ni ddylai achosi "
-"unrhyw\n"
-"ddifrod."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Awtoholi"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Enwi dewisiadau"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Methodd llwytho modiwl %s\n"
-"Hoffech chi drio eto gyda pharamedrau eraill?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "rhif"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d rhifau gwahanwyd gan gollnod"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d llinellau gwahanwyd gan gollnod"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "rhifau gwahanwyd gan gollnod"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "llinellau collnod rhanedig"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Llygoden - Sun"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Safonol"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Llygoden Olwyn PS Generig"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Awtomatig"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 botwm"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Llygoden 2 Fotwm Generig"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Llygoden 3 Botwm Generig gydag efelychiad Olwyn"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Olwyn"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "cyfresol"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Llygoden 3 Botwm Generig"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan gydag efelychiad Olwyn"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Systemau  Llygoden"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Series gydag efelychiad Olwyn"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Llygoden Logitech (cyfresol, hen fath C7)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Llygoden Logitech (cyfresol, hen fath C7) gydag efelychiad Olwyn"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse gydag efelychiad Olwyn"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "busmouse"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 fotwm"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 botwm"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3 botwm gydag efelychiad Olwyn"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Cyffredinol"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Unrhyw lygoden PS/2 ac USB"
-
-#: mouse.pm:89
-#, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Xbox Controller S"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "dim"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Dim llygoden"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Pad Cyffwrdd Synaptic"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Profwch y llygoden"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "I ysgogi'r llygoden,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "SYMUDWCH YR OLWYN!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "defnyddiwch PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "defnyddiwch PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "defnyddiwch dhccp"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel Speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - canfuwyd"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "USB Sagem (defnyddio PPOA)"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "USB Sagem (defnyddio DHCP)"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Cysylltu â'r We"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"Y ffordd mwyaf cyffredin i gysylltu â adsl yw PPPoE\n"
-"Mae rhai cysylltiadau'n defnyddio PPTP, a rhai DHCP.\n"
-"Os nad ydych yn gwybod pa un, dewiswch 'pppoe'."
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "Math o gysylltiad ADSL :"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Gweinydd Gwe"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Gweinydd Enw Parth"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "Gweinydd SSH"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "Gweinydd FTP"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Gweinydd E-bost"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "Gweinydd POP ac IMAP"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Gweinydd Telnet"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr "Rhannu Ffeiliau Wondows (SMB)"
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "Gweinydd CUPS"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Cais Echo (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "BitTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"ffurfweddiadur drakfirewall\n"
-"\n"
-"Mae hwn yn ffurfweddu mur gwarchod personol ar gyfer y peiriant \n"
-"Mandriva Linux hwn. Am fur gwarchod pwrpasol pwerus, \n"
-"edrychwch ddosbarthiad arbenigol Mandriva Security Firewall."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Ffurfweddwr Drakfirewall\n"
-"\n"
-"Gwnewch yn siŵr eich bod wedi ffurfweddu eich mynediad\n"
-"Rhwydwaith/Rhyngrwyd gyda Drakconnect cyn mynd ymhellach."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Pa wasanaethau'r hoffech i'r Rhyngrwyd gysylltu â hwy?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Gallwch roi amrywiol byrth.\n"
-"Eng. dilys: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Am wybodaeth ewch i /etc/services."
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Porth annilys wedi ei gynnig: %s.\n"
-"Y fformat cywir yw \"port/tcp\" neu \"port/udp\", \n"
-"lle mae porth rhwng 1 a 65535.\n"
-"\n"
-"Cewch hefyd gynnig ystod o byrth (ee: 24300:24350/udp)"
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Popeth (dim mur cadarn)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Pyrth eraill"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "Heb ei restru - golygu gyda llaw"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Dim syniad"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Llaw"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr "Does dim dyfais sy'n cynnal gyrrwr %s ndiswrapper yn bresenol!"
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr "Dewiswch y gyrrwr Windows (.inf file)"
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr "Methu arsefydlu y gyrrydd ndiswrapper %s"
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr "methu llwytho'r modiwl ndiswrapper!"
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-"Mae'r ddyfais hon wedi ei ffurfweddu eisoes gyda gyrrwr %s.\n"
-"Ydych chi wir am ddefnyddio gyrrwr ndiswrapper ?"
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr "Methu canfod rhyngwyneb ndiswrapper!"
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "Dewis gyda llaw"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Cerdyn ISDN mewnol"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Ffurfweddiad gyda llaw"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "IP awtomatig (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "IP awtomatig (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protocol ar gyfer gweddill y byd"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protocol Ewropeaidd (EDSSI)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protocol ar gyfer gweddill y byd\n"
-" dim D-Channel (llinell les)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Modem USB Alcatel Speedtouch"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Modem USB Sagem"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Modem Bewan"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "Modem ECI Hi-Focus"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Dynamic Host Configuration Protocol (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Ffurfweddu TCP/IP  gyda llaw"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "Point to Point Tunneling Protocol (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP over Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP over ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr "DSL dros CAPI"
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Pont Ethernet LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Pont Ethernet VC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "Trywydd IP LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "Trywydd IP VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Seiliedig ar sgript"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Seiliedig ar derfynell"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr "Agor WEP"
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr "WEP cyfyngedig"
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr "Allwedd Cyn Rhannu WEP"
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Ffurfweddiad y Rhwydwaith a'r Rhyngrwyd"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(canfuwyd ar borth %s)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(canfuwyd %s)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(canfuwyd)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "cysylltiad LAN"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Cysylltiad diwyfr"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "Cysylltiad ADSL"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Cysylltiad cebl"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "Cysylltiad ISDN"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Cysylltiad modem"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Dewiswch y math o gysylltiad rydych am ei ffurfweddu"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Rydym yn awr yn mynd i ffurfweddu cysylltiad %s.\n"
-"\n"
-"\n"
-"Pwyswch \"%s\" i barhau."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Ffurfweddiad y Cysylltiad"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Llanwch neu ticiwch y maes islaw"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ y cerdyn"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Cof Cerdyn (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "IO'r Cerdyn"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_O y cerdyn"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 y cerdyn"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Eich rhif ffôn personol"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Enw darparwr (eng. darparwr.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Rhif ffôn y darparwr"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "Darparwr DNS 1 (dewisol)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "Darparwr DNS 2 (dewisol)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Modd deialu"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Cyflymder y cysylltiad"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Oediad yn y cysylltiad (mewn eiliadau)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Mewngofnod Cyfrif (enw defnyddiwr)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Cyfrinair y Cyfrif"
-
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr "Cebl: dewisiadau cyfrif"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr "Defnyddiwch BPALogin (ar gyfer Telstra)"
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Dewis y rhyngwyneb rhwydwaith i'w ffurfweddu:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Dyfais Rhyngrwyd"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Modem IDSN Allanol"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Dewis dyfais!"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Ffurfweddiad ISDN"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Pa fath o gerdyn sydd gennych?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Os oes gennych gerdyn ISA, dylai'r gwerthoedd ar y sgrin nesaf fod yn "
-"gywir.\n"
-"\n"
-"Os oes gennych gerdyn PCMCIA, rhaid i chi wybod \"irq\" ac \"o\" eich "
-"cerdyn.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Parhau"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Peidio"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Pa un o'r canlynol yw eich cerdyn IDSN?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-"Mae gyrrwr CAPI ar gael ar gyfer y modem. Mae gyrrwr CAPI'n cynnig mwy o "
-"swyddogaethau na'r gyrrwr rhydd (fel anfon ffacs). Pa yrrwr hoffech chi ei "
-"ddefnyddio?"
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Gyrrwr"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Pa brotocol ydych chi eisiau ei ddefnyddio?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protocol"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Dewiswch eich darparwr.\n"
-"Os nad yw ar eich rhestr, dewiswch Heb ei Restri"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Darparwr:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Nid yw'r system yn cynnal eich modem.\n"
-"Ewch i http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Dewis y modem i'w ffurfweddu:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Dewiswch ba borth cyfresol mae eich modem wedi cysylltu iddo."
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Dewis eich darparwr:"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Deialu: dewisiadau cyfrif"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Enw'r cysylltiad"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Rhif ffôn"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Dynodiad Mewngofnodi"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "Deialu: paramedrau'r IP"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "Paramedrau IP"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "Cyfeiriad IP"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Masg Isnet"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Deialu: paramedrau DNS"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Enw parth"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Gweinydd DNS Cyntaf (dewisol)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Ail Wasanaethwr DNS (dewisol)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "Gosod enw'r gwesteiwr o'r IP"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Mynedfa"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "Cyfeiriad porth IP"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "Ffurfweddiad ADSL"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Dewiswch eich darparwr ADSL"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"Rhaid cael meicrocod Alcatel.\n"
-"Mae modd ei ddarparu ar ddisg meddal neu o'ch rhaniad Windows,\n"
-"neu ei adael tan rywbryd eto."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Defnyddiwch ddisg meddal"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Defnyddio fy rhaniad Windows"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Gwneud yn hwyrach"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "Methodd copïo'r gadarnwedd, heb ganfod ffeil %s"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "Copïo'r gadarnwedd yn llwyddiant"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Rhaid cael mincod Alcatel.\n"
-"Llwytho i lawr o\n"
-"%s\n"
-"a chopïo’r mgmt.o i /usr/share/speedtouch"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "Virtual Path ID (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "Virtual Circuit ID (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "Mewngapsiwleiddio :"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"Methu cynnal modem ECI Hi-Focus oherwydd problem dosbarthu gyrrwr deuaidd.\n"
-"\n"
-"Mae modd canfod gyrrwr ar http://eciadsl.flashtux.org/"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "Llwytho gyrrwr gyda llaw"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr "Defnyddiwch yrrwr Windows (gydan ndiswrapper)"
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "Methu gosod pecyn %s!"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Cydraniad enw gwesteiwr Zeroconf"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Ffurfweddu dyfais rhwydwaith %s (gyrrwr %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-"Mae modd defnyddio'r protocolau canlynol i ffurfweddu cysylltiad LAN. "
-"Dewiswch yr un i'w ddefnyddio."
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Rhowch ffurfweddiad IP ar gyfer y peiriant hwn\n"
-"Dylai pob eitem ei roi fel cyfeiriad IP nodiant collnod degymol\n"
-"(e.e.1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Rhowch enw'r gwesteiwr o'r cyfeiriad DHCP"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "Enw gwesteiwr DHCP"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Dilynwch gyfernod cerdyn rhwydwaith (defnyddiol ar gyfer gliniadur)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Plygio byw'r Rhwydwaith"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Cychwyn y peiriant"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "Metrig"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "Cleient DHCP"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Amser allan DHCP (mewn eiliadau)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "Estyn gweinyddion DNS o DHCP"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr "Estyn gweinyddion YP o DHCP"
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr "Estyn gwenyddion NTPD o DHCP"
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "dylai cyfeiriad IP fod mewn fformat  1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Dylai Netmask fod ar fformat 255.255.224.0"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "Rhybudd : cyfeiriad IP %s wedi ei gadw fel rheol !"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s yn cael ei ddefnyddio eisoes\n"
-
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Dewis gyrrwr ndiswrapper"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr "Defnyddiwch y gyrrydd ndiswrapper %s"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr "Gosod gyrrwr newydd"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr "Dewis dyfais:"
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "Rhowch baramedrau diwyfr y cerdyn:"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "Modd Gweithredu"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Ad-hoc"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Rheolwyd"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Meistr"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Eilydd"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Eilradd"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Awtomatig"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Enw'r rhwydwaith (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "Enw Rhwydwaith"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "Amledd gweithredu"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "Trothwy sensitifrwydd"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Didradd (mewn b/s)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr "Modd Amgryptiedig"
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-"Mae RTS/CTS yn ychwanegu ysgwyd llaw cyn trosglwyddo pob pecyn i wneud\n"
-"yn siŵr y sianel yn glir. Mae hyn yn ychwanegu baich, ond mae'n cynyddu'r "
-"perfformiad\n"
-"yn achos cwgn cudd neu nifer fawr o gygnau gweithredol. Mae'r paramedr hwn "
-"yn gosod\n"
-"maint y pecyn lleiaf y bydd y cwgn yn anfon RTS, gwerth cydradd â'r maint\n"
-"pecyn mwyaf sy'n gallu anablu'r cynllun. Mae modd i chi osod y paramedr hwn "
-"i awto,\n"
-"gosodedig  neu ddiffodd"
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "Darniad"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "ymresymiadau ychwanegol gorchymyn Iwconfig"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-"Yma cewch ffurfweddu paramedrau diwyfr eraill megis,:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick wedi ei osod fel "
-"enw'r gwesteiwr).\n"
-"\n"
-"Gw. tudalen iwpriv(8) man am ragor o wybodaeth"
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "ymresymiadau ychwanegol gorchymyn lwspy"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-"Mae lwspy yn cael ei ddefnyddio i osod rhestr o gyfeiriadau mewn\n"
-"rhyngwyneb rhwydwaith diwyfr ac adrodd ar ansawdd y cyswllt ar gyfer pob un\n"
-"\n"
-"Mae'r wybodaeth yr un ar sydd ar gale yn /proc/net/wireless :\n"
-"ansawdd y cyswllt, cryfder y signal a lefel y sŵn.\n"
-"\n"
-"Gw. tudalennau man iwpspy(8) am ragor o wybodaeth. "
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "ymresymiadau ychwanegol gorchymyn Iwpriv"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-"Mae iwpriv yn caniatáu gosod paramedrau dewisol (preifat) rhyngwyneb\n"
-"rhwydwaith diwyfr.\n"
-"\n"
-"Mae iwpriv yn trin paramedrau a gosodiadau penodol pob gyrrwr (o gynharu\n"
-"ag iwconfig sy'n delio â rhai generig).\n"
-"\n"
-"Mewn theori dylai dogfennaeth y gyrwyr hyn ddangos sut i ddefnyddio\n"
-"gorchmynion rhyngwyneb penodol a'u heffaith.\n"
-"\n"
-"Gw. tudalen iwpriv(8) man am ragor o wybodaeth."
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Dylai Frqu gael rhagosodiad k, M neu G (ee \"2.46G\" am donfedd 2.46 GHz ), "
-"neu ychwanegu '0' (sero)."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Dylai'r raddfa gael rhagosodiad K, M neu G (e.e.\"11M\" am 11M),  neu "
-"ychwanegi '0' (sero)."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Rhowch eich enw gwesteiwr.\n"
-"Dylai eich enw gwesteiwr fod yn enw gwesteiwr llawn gymwys.\n"
-"megis \"fymlwch.fynesg.fyngho.com\".\n"
-"Gallwch hefyd gynnig eich cyfeiriad IP os oes gennych un"
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr "Yn olaf mae modd i chi deipio cyfeiriadau IP eich gweinydd DNS."
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Enw gwesteiwr (dewisol)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Enw gwesteiwr"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "Gweinydd DNS 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "Gweinydd DNS 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "Gweinydd DNS 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "Chwilio parth"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-"Drwy ragosodiad bydd y parch chwilio'n cae ei osod o enw gwesteiwr cymwys"
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Mynedfa (e.e. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Dyfais mynedfa"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Dylai cyfeiriad DNS fod mewn fformat  1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Dylai cyfeiriad Porth fod mewn fformat  1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-"Os hoffech chi rhowch enw parth Zeroconf.\n"
-"Dyma'r enw fydd eich cyfrifiadur yn ei ddefnyddio i hysbysu\n"
-"unrhyw un o'i adnoddau rhannwyd nad ydynt wedi eu rheoli gan\n"
-"rwydwaith. Nid oes angen gyda'r rhan fwyaf o rwydweithiau."
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Enw Gwesteiwr Zeroconf"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Rhaid i enw gwesteiwr Zeroconf beidio cynnwys ."
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Rydych wedi ffurfweddu nifer o ffyrdd i gysylltu â'r Rhyngrwyd.\n"
-"Dewiswch ba un rydych am ei ddefnyddio.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Cysylltiad â'r Rhyngrwyd"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Mae'r ffurfweddu wedi ei gwblhau, hoffech eu gosod?"
-
-#: network/netconnect.pm:1439
-#, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Ydych chi eisiau caniatáu i ddefnyddwyr gychwyn y cysylltiad?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Ydych chi eisiau agor y cysylltiad wrth gychwyn y cyfrifiadur?"
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "Yna awtomatig wrth gychwyn"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr "Drwy ddefnyddio Net Applet yn y gilfach"
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr "Gyda llaw (bydd y rhyngwyneb yn dal i gychwyn wrth gychwyn)"
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Sut ydych am ddeialu’r cysylltiad?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Rhaid i'r rhwydwaith gael ei ailgychwyn.  Ydych chi am ei ailgychwyn?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Ffurfweddiad y Rhwydwaith"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Digwyddodd gwall wrth ail gychwyn y rhwydwaith:\n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Hoffech chi gysylltu â'r Rhyngrwyd nawr?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Profi eich cysylltiad..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Mae'r system wedi cysylltu â'r Rhyngrwyd."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Am resymau diogelwch, bydd yn cael ei ddatgysylltu."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Nid yw'n ymddangos i'ch system gysylltu â'r Rhyngrwyd.\n"
-"Ailffurfweddwch eich cysylltiad."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Llongyfarchiadau, mae ffurfweddiad y rhwydwaith a'r Rhyngrwyd wedi ei "
-"gwblhau\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Wedi i hyn gael ei wneud rydym yn argymell eich bod yn a'i gychwyn "
-"amgylchedd X i osgoi unrhyw anawsterau'n perthyn i enwau gwesteiwr.\n"
-"."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Digwyddod anhawsterau yn ystod y ffurfweddiad.\n"
-"Profwch eich cysylltiad drwy net_monitor neu mcc. Os nad yw eich cysylltiad "
-"yn gweithio, efallai y byddwch eisiau ailgychwyn y ffurfweddiad"
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Am eich bod yn gosod eich rhwydwaith, mae eich rhwydwaith eisoes wedi ei "
-"ffurfweddu\n"
-"Cliciwch Iawn i gadw eich ffurfweddiad, neu ddileu i ail ffurfweddi eich "
-"cysylltiad Rhyngrwyd a Rhwydwaith.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"Digwyddodd gwall annisgwyl:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Ffurfweddiad dirprwyon"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "Dirprwy HTTP"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "Dirprwy FTP"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Dylai dirprwyon fod yn gyfanrif!"
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Dylai'r URL ddechrau gyda 'ftp' neu 'http:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Rhybudd! Mae ffurfweddiad mur gwarchod wedi ei ganfod. Efallai bydd angen "
-"atgyweirio gyda llaw ar ôl y gosodiad."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"Rhowch enw'r rhyngwyneb sy'n cysylltu â'r rhyngrwyd.\n"
-"\n"
-"Enghreifftiau:\n"
-"\t\tppp+ cysylltiad modem neu DSL, \n"
-"\t\teth0, neu eth1 fam gysylltiad cebl, \n"
-"\t\tippp+ am gysylltiad idsn.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Rhowch ddisg meddal"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s gyda %s yng "
-"nghyfeiriadur gwraidd a phwyso %s"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Gwall mynediad i'r disg meddal, methu gosod dyfais %s"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "maethodd y gosodiad"
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Nid yw'r rhaniad estynedig yn cael ei gynnal ar y platfform hwn"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Mae gennych dwll yn nhabl eich rhaniad ond nid wyf yn gallu ei ddefnyddio\n"
-"Yr unig ateb yw i symud eich rhaniadau cynradd fel bo'r twll nesaf at y "
-"rhaniadau estynedig "
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Methodd adfer o ffeil %s: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Ffeil wrth gefn gwallus"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Gwall wrth ysgrifennu i ffeil %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Mae rhywbeth gwael yn digwydd ar eich disg.\n"
-"Mae prawf i fesur ei gyfanrwydd wedi methu. \n"
-"Nid oes gwerth ysgrifennu i'r ddisg"
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "rhaid cael"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "pwysig"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "hyfryd iawn"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "hyfryd"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "efallai"
-
-#: pkgs.pm:481
-#, c-format
-msgid "Downloading file %s..."
-msgstr "Llwytho ffeil %s..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(ar %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(ar y peiriant hwn)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Ffurfweddu ar beiriannau eraill"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ar weinydd CUPS \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr "(Rhagosodedig)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Print, Do not Queue"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Common Unix Printing System (gweinydd pell)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "CUPS pell"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Model anhysbys"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Argraffydd lleol"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Argraffydd pell"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Argraffydd ar weinydd CUPS pell"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Argraffydd ar weinydd lpd pell"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Argraffydd rhwydwaith (TCP/Soced)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Argraffydd ar weinydd SMB/Windows 95/98/NT"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Argraffydd ar weinydd NetWare"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Rhowch URI dyfais argraffydd"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Peipio'r gwaith i orchymyn"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "argymhellir"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Model anhysbys"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "Ffurfweddwyd ar y peiriant hwn"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " ar borth paralel #\"%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", argraffydd USB #\"%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", argraffydd USB"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ". Argraffydd HP ar borth paralel"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", Argraffydd HP ar USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", Argraffydd HP ar HP JetDirect"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", Argraffydd HP"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", dyfais amlbwrpas ar borth paralel #\"%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", dyfais amlbwrpas ar borth paralel"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", dyfais amlbwrpas ar USB"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", dyfais amlbwrpas ar HP JetDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ",dyfais amlbwrpas"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", argraffu i %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "ar weinydd LPD  \"%s\", argraffydd \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", gwesteiwr TCP/IP  \"%s\", porth %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "ar weinydd SMB/Windows  \"%s\", rhannu \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "ar weinydd Novell \"%s\", argraffydd \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", defnyddio gorchymyn %s"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Porth paralel #\"%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "Argraffydd USB #\"%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "Argraffydd USB"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "Argraffydd HP ar borth paralel"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "Argraffydd HP ar USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "Argraffydd HP ar HP JetDirect"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "Argraffydd HP"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Dyfais amlbwrpas ar borth paralel #\"%s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "Dyfais amlbwrpas ar borth paralel"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "Dyfais amlbwrpas ar USB"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "Dyfais amlbwrpas ar HP JetDirect"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Dyfais amlbwrpas"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Argraffu i %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "Gweinydd LPD  \"%s\", argraffydd \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "Gwesteiwr TCP/IP  \"%s\", porth %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "Gweinydd SMB/Windows  \"%s\", rhannu \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Gweinydd Novell \"%s\", argraffydd \"%s\""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "Defnyddio gorchymyn %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Argraffydd crai (dim gyrrwr)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Rhwydwaith(iau) lleol "
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Rhyngwyneb \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Rhwydwaith %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Gwesteiwr %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Porth %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Mae'r HP LaserJet 1000 angen cael ei gadarnwedd wedi ei lwytho i fyny ar ôl "
-"ei gychwyn. Estynnwch y pecyn gyrrwr Windows o safle gwe HP (nid yw'r "
-"gadarnwedd ar CD yr argraffydd yn gweithio) a thynnwch y ffeil cadarnwedd "
-"ohono gan ddatgywasgu 'r ffeil 'exe' gyda rhaglen 'datgywasgu' a chwilio am "
-"y ffeil 'sihp1000.img'. Copïo'r ffeil i gyfeiriadur '/etc/printer'. Yna bydd "
-"yn cael ei ganfod gan y sgript llwytho awtomatig a'i lwytho pryd bynnag fydd "
-"yr argraffydd wedi ei gysylltu â'i gychwyn.\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "Ffurfweddiad argraffydd CUPS "
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Yma gallwch benderfynu a ddylai'r argraffyddion sy'n gysylltiedig â'r "
-"cyfrifiadur hwn fod ar gael i gyfrifiaduron pell a pha rai."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Gallwch benderfynu a ddylai argraffydd ar gyfrifiadur pell fod ar gael ar "
-"gyfer y cyfrifiadur hwn."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Mae' argraffyddion y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Canfod argraffyddion ar gyfrifiaduron pell, yn awtomatig."
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Rhannu argraffydd ar westeiwr/rhwydwaith:"
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Ffurfweddiad addasu"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Dim cyfrifiaduron pell"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Gweinyddion CUPS ychwanegol:"
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"I gael mynediad at argraffyddion ar weinyddion CUPS pell yn eich rhwydwaith "
-"lleol dim ond angen i chi  gychwyn y dewis \"Canfod argraffyddion ar "
-"gyfrifiaduron pell\" ; bydd y gweinyddion CUPS yn dweud wrth eich "
-"cyfrifiadur am eu hargraffydd. Mae pob argraffydd sy'n hysbys i'ch "
-"cyfrifiadur yn cael ei restri yn adran \"Argrafargraffyddion pell\" prif "
-"ffenestr Printerdrake. Os yw/nad yw eich gweinydd(wyr) CUPS ar eich "
-"rhwydwaith lleol rhaid rhoi cyfeiriad(au) IP ac yn ddewisol rhif(au) porth "
-"yma i gael gwybodaeth am yr argraffydd gan y gweinydd(wyr)."
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Modd argraffu testun Siapanëeg"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Drwy gychwyn hwn bydd yn caniatáu argraffu testun plaen yn yr iaith "
-"Siapanëeg. Defnyddiwch hwn os ydych wir angen argraffu testun yn Siapanëeg, "
-"oherwydd os ydych yn ei ddefnyddio ni fydd modd argraffu nodau acennog mewn "
-"ffontiau Lladin ragor ac ni fydd modd newid ymyl tudalen na maint ffontiau, "
-"ag ati. Mae hyn yn effeithio ar argraffyddion sydd wedi eu diffinio ar y "
-"cyfrifiadur hwn. Os ydych am argraffu testun Siapanëeg ar argraffydd sy'n "
-"gysylltiedig â chyfrifiadur pell, bydd angen cychwyn y nodwedd ar y "
-"cyfrifiadur hwnnw."
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Cywiro cyswllt CUPS yn awtomatig"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Pan mae'r dewis yma ar gael, gwneud yn siŵr wrth gychwyn CUPS fod\n"
-"\n"
-"- os yw LPD/LPRng wedi ei osod, na fydd CUPS yn ysgrifennu dros /etc/"
-"printcap\n"
-"\n"
-"- os yw /etc/cups/cupsd.conf ar goll, bydd yn cael ei greu\n"
-"\n"
-"- pan mae gwybodaeth am argraffydd yn cael ei ledaenu, nid yw'n cynnwys "
-"\"localhost\" fel enw gweinydd.\n"
-"\n"
-"Os yw rhai o'r rhain yn achosi anhawster, diffoddwch y dewis hwn, ond bydd "
-"rhaid i chi ofalu amdanynt."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr "Gweinydd CUPS pell a dim daemon CUPS lleol"
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Ymlaen"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Diffodd "
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"Yn y modd hwn bydd y daemon CUPS lleol yn cael ei atal a bydd yr holl "
-"geisiadau argraffu'n mynd yn syth i'r gweinydd enwyd isod. Sylwch na fydd yn "
-"bosib diffinio rhesi argraffu lleol ac os bydd y gweinydd hwnnw i lawr nid "
-"oes modd ei argraffu o'r peiriant hwn."
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Rhannu argraffyddion lleol"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r argraffydd(ion) lleol fod ar "
-"gael:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Ychwanegu gwesteiwr/rhwydwaith"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Golygu'r gwesteiwr/rhwydwaith"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Tynnu'r gwesteiwr/rhwydwaith"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "Cyfeiriad IP gwesteiwr/rhwydwaith"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Dewis y rhwydwaith neu westeiwr ddylai'r argraffyddion lleol fod ar gael "
-"iddynt:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "Cyfeiriad y gwesteiwr/rhwydwaith ar goll."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Nid yw IP y gwesteiwr/rhwydwaith yn gywir.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Esiamplau cywir ar gyfer IP:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Mae'r gwesteiwr/rhwydwaith ar y rhestr yn barod, does dim modd ei "
-"ychwanegu.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Mynediad at argraffydd ar weinydd CUPS pell"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Ychwanegwch y gweinyddion CUPS yr argraffwyr rydych am eu defnyddio. Bydd "
-"angen gwneud hyn dim ond os nad yw'r gweinyddion yn darlledu eu gwybodaeth "
-"argraffu i'r rhwydwaith lleol."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Ychwanegu gweinydd"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Golygu'r gwesteiwr"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Tynnu'r gwesteiwr"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Rhowch gyfeiriad IP a phorth gwesteiwr yr argraffydd rydych am ei ddefnyddio."
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-"Os nad oes porth yn cael ei gynnig, bydd 631 yn cael ei gymryd fel y "
-"rhagosodedig."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "IP'r gweinydd ar goll!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Nid yw'r IP'n gywir.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Dylai rhif porth fod yn gyfanrif!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-"Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu eto.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Porth"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "mlaen, Enw neu IP gweinydd pell"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Mae enw gweinydd CUPS neu gyfeiriad IP ar goll."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Darllen data argraffydd..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Ail gychwyn CUPS"
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Dewiswch Gysylltiad Argraffydd"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Sut mae'r argraffydd wedi ei gysylltu?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Nid oes angen ffurfweddu argraffyddion ar weinyddion CUPS pell: byddant yn "
-"cael eu canfod yn awtomatig."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"RHYBUDD: Nid oes cyswllt rhwydwaith lleol yn weithredol, nid oes modd canfod "
-"na phrofi argraffyddion pell!"
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-"Awtoganfod argraffydd (Argraffyddion lleol, TCP/Socket, SMB, ac URL dyfais)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr "Newid amser allan ar gyfer awtoganfod argraffyddion rhwydwaith "
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr "Newid amser allan ar gyfer awtoganfod argraffyddion rhwydwaith "
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-"Yr hira bo'r amser allan, y mwyaf dibynadwy fydd canfod yr argraffyddion "
-"rhwydwaith, ond gall y canfod cymryd mwy o amser, yn arbennig os oes yna "
-"lawer o furiau cadarn lleol yn y rhwydwaith."
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Rhaid i'r amser allan fod yn rif cyfanrif positif!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Gwirio eich system..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "ac un argraffydd anhysbys"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "a %d argraffydd anhysbys"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Mae argraffyddion canlynol\n"
-"\n"
-"%s%s\n"
-"wedi eu cysylltu'n uniongyrchol â'ch system"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s%s\n"
-"wedi ei gysylltu'n uniongyrchol â'ch system"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s%s\n"
-"wedi ei gysylltu'n uniongyrchol â'ch system"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Mae un argraffydd anhysbys wedi ei gysylltu'n uniongyrchol â'ch system"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Mae yna %d argraffydd anhysbys wedi eu cysylltu'n uniongyrchol â'ch system"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-"Nid oes unrhyw argraffydd wedi ei ganfod wedi ei gysylltu'n uniongyrchol "
-"â'ch cyfrifiadur"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr ""
-"(Gwnewch yn siŵr bod eich argraffyddion wedi eu cysylltu â'u troi ymlaen).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Ydych chi am ganiatáu argraffu ar yr argraffyddion enwir uchod neu ar yr "
-"argraffyddion ar y rhwydwaith lleol?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Ydych chi am alluogi argraffu ar argraffydd mewn rhwydwaith lleol?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Ydych chi am alluogi argraffu ar yr argraffyddion enwi'r uchod?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Ydych chi'n siŵr eich bod am osod argraffu ar y peiriant hwn?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"NODYN: Yn dibynnu ar yr argraffydd a'r system argraffu bydd hyd at %d MB o "
-"feddalwedd ychwanegol yn cael ei osod."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Chwilio am argraffyddion newydd..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "Wedi canfod argraffydd ar %s..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr "ar "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Dewis model yr argraffydd"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Pa fath o argraffydd sydd gennych?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"Nid oedd Printerdrake yn gallu adnabod eich argraffydd %s. Dewiswch yr un "
-"cywir o'r rhestr."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Nid yw eich argraffydd wedi ei rhestri, dewiswch un cyfatebol (gw. llawlyfr "
-"eich argraffydd) neu un tebyg."
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "Ffurfweddu argraffydd ar %s ..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Ffurfweddu argraffydd \"%s\" ..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Ychwanegu argraffydd newydd"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-" Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Mae'r dewin yn caniatáu i chi osod argraffyddion lleol neu bell i'w "
-"defnyddio o'r peiriant hwn a hefyd gan argraffyddion eraill ar eich "
-"rhwydwaith.\n"
-"\n"
-"Bydd yn gofyn am yr holl wybodaeth angenrheidiol i osod yr argraffydd a bydd "
-"yn rhoi mynediad i'r holl yrwyr argraffyddion sydd ar gael, dewisiadau "
-"gyrwyr a mathau o gysylltiadau argraffyddion."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"â'r cyfrifiadur  hwn,yn gysylltiedig â'r rhwydwaith neu i beiriant Windows "
-"pell.\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig â'r peiriant, cysylltwch nhw "
-"â'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
-"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
-"ymlaen.\n"
-"\n"
-"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
-"awtoganfod argraffyddion sy'n gysylltiedig â'r peiriant hwn. Felly, "
-"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"â'r cyfrifiadur  hwn,\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig â'r peiriant, cysylltwch nhw "
-"â'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"â'r cyfrifiadur  hwn, yn gysylltiedig â'r rhwydwaith.\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig â'r peiriant, cysylltwch nhw "
-"â'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod. Hefyd rhaid i "
-"argraffydd(ion) rhwydwaith a'ch peiriannau Windows fod wedi eu cysylltu ac "
-"ymlaen.\n"
-"\n"
-"Sylwer bod awtoganfod argraffyddion ar rwydwaith yn cymryd mwy o amser nag "
-"awtoganfod argraffyddion sy'n gysylltiedig â'r peiriant hwn. Felly, "
-"diffoddwch awto ganfod rhwydwaith pan nad oes mo'i angen.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Croeso i'r Dewin Gosod Argraffydd\n"
-"\n"
-"Bydd y dewin yn eich cynorthwyo i osod argraffydd(ion) sydd wedi eu cysylltu "
-"â'r cyfrifiadur  hwn,\n"
-"\n"
-"Os oes gennych argraffydd(ion) yn gysylltiedig â'r peiriant, cysylltwch nhw "
-"â'r peiriant a'u troi nhw mlaen fel bod modd awtoganfod.\n"
-"\n"
-"Cliciwch \"Nesaf\" pan ydych yn barod, a \"Diddymu\" os nad ydych am osod "
-"eich argraffydd(ion) ar hyn o bryd."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Awto ganfod argraffyddion sy'n gysylltiedig â'r peiriant hwn"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-"Awtoganfod argraffyddion sy'n gysylltiedig yn uniongyrchol â'r rhwydwaith "
-"lleol"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Awtoganfod argraffyddion sy'n gysylltiedig â pheiriannau'n rhedeg Microsoft "
-"Windows"
-
-#: printer/printerdrake.pm:1151
-#, c-format
-msgid "No auto-detection"
-msgstr "Dim awtoganfod"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Llongyfarchiadau, mae eich argraffydd wedi ei osod a'i ffurfweddu!\n"
-"\n"
-"Mae modd argraffu gan ddefnyddio gorchymyn \"Argraffu\" eich rhaglen (fel "
-"rheol yn newislen \"Ffeil\").\n"
-"\n"
-"Os ydych am ychwanegu, tynnu neu ailenwi argraffydd, neu os ydych am newid y "
-"gosodiadau dewis rhagosodedig (mewnflwch papur, ansawdd yr argraffu...), "
-"dewiswch \"Argraffydd\" yn adran \"Caledwedd\" Canolfan Rheoli %s."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "Methu gosod pecynnau: %s!"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr "Osgoi awto ganfod gweinydd Windows/SMB"
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Awto ganfod argraffydd"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Canfod dyfeisiau..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", rhwydwaith argraffu \"%s\", porth %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", argraffydd \"%s\" ar weinydd  SMB/Windows \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "Canfuwyd %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Argraffydd ar borth paralel #\"%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Argraffydd rhwydwaith \"%s\", porth %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Argraffydd  \"%s\" ar weinydd SMB/Windows \"%s\""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Argraffydd Lleol"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Heb ganfod argraffydd lleol! I osod argraffydd gyda llaw, rhowch enw'r "
-"ddyfais /enw ffeil ar y llinell mewnbwn (Porth Paralel: /dev/lp0, /"
-"dev/,...., cyfatebol i LPT1:, LPT2,..., argraffydd USB 1af: /dev/usb/lp0,  "
-"ail argraffydd USB: /dev/usb/lp1,...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Rhaid cynnig enw dyfais neu ffeil!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Heb ganfod argraffydd!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Argraffyddion Lleol"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Argraffyddion ar gael"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Mae'r argraffydd canlynol wedi ei awtoganfod"
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Os nad hwn yw'r un rydych am ei ffurfweddu, rhowch enw dyfais/enw ffeil ar y "
-"llinell mewnbwn."
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Yn lle hynny, rhowch enw dyfais/ffeil ar y llinell mewnbwn"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Dyma restr o argraffyddion wedi eu awtoganfod."
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Dewiswch yr argraffydd i'w osod neu rhowch enw dyfais/ffeil ar y llinell "
-"mewnbwn"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Dewiswch yr argraffydd i drin y gwaith argraffu neu rhowch enw dyfais/ffeil "
-"ar y llinell mewnbwn"
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Bydd ffurfweddi'r argraffydd yn digwydd yn awtomatig. Os na chafodd eich "
-"argraffydd ei ganfod yn gywir neu byddai'n well gennych ffurfweddiad unigryw "
-"i'ch argraffydd, cychwynnwch \"Ffurfweddiad gyda Llaw\"."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Does dim dewis arall ar gael ar hyn o bryd"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Dewiswch yr argraffydd rydych am ei osod. Bydd ffurfweddu'r argraffydd yn "
-"digwydd yn awtomatig. Os na chafodd eich argraffydd ei ganfod yn gywir neu "
-"byddai'n well gennych ffurfweddiad unigryw i'ch argraffydd, cychwynnwch "
-"\"Ffurfweddiad gyda Llaw\"."
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Dewiswch yr argraffydd i drin y gwaith argraffu."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Dewiswch y porth y mae eich argraffydd wedi cysylltu iddo neu rhowch enw "
-"dyfais/ffeil ar y llinell mewnbwn"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Dewiswch y porth mae'r argraffydd wedi cysylltu iddo."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Pyrth paralel: /dev/lp0, /dev/lp1, ..., yn cyfateb i LPT1:, LPT2:, ..., "
-"argraffydd USB cyntaf: /dev/usb/lp0, ail argraffydd USB : /dev/usb/lp1, ...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Rhaid dewis/rhoi argraffydd/dyfais!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "Atal"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Dewisiadau Argraffydd lpd Pell"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"I ddefnyddio argraffydd lpd pell, rhaid darparu enw gwesteiwr gweinydd yr "
-"argraffydd ac enw'r argraffydd ar y gweinydd hwnnw."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Enw gwesteiwr pell"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Enw'r argraffydd pell"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Mae enw'r gwesteiwr pell ar goll!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Mae enw'r argraffydd pell ar goll!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Gwybodaeth"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Canfuwyd model %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Chwilio'r rhwydwaith..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", argraffydd \"%s\" ar weinydd \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Argraffydd \"%s\" ar weinydd \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Dewisiadau Argraffydd SMB (Windows 9x/NT)"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"I argraffu i argraffydd SMB, rhaid darparu enw gwesteiwr SMB (Sylwer! Mi all "
-"fod yn wahanol i'w enw gwesteiwr TCP/IP!) ac o bosibl cyfeiriad IP'r "
-"gweinydd argraffu, yn ogystal â'r enw rhannu ar gyfer yr argraffydd rydych "
-"am gael mynediad iddo ac unrhyw enw defnyddiwr, cyfrinair a gwybodaeth am "
-"grŵp gwaith perthynol."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Os cafodd yr argraffydd ei awtoganfod, dewiswch ef o'r rhestr ac ychwanegu "
-"enw defnyddiwr, cyfrinair a/neu grŵp gwaith yn ôl yr angen."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "Gweinydd gwesteiwr SMB"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP Gweinydd SMB"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Rhannu enw"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Grŵp gwaith"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Awto ganfod"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Rhaid rhoi un ai enw'r gweinydd neu IP'r gweinydd!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Mae enw rhannu Samba ar goll!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "RHYBUDD DIOGELWCH!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Rydych ar fin gosod y modd i argraffu i gyfrif Windows gyda chyfrinair. "
-"Oherwydd gwall ym mhensaernïaeth meddalwedd cleient Samba mae'r cyfrinair yn "
-"cael ei osod mewn testun plaen ar y llinell orchymyn y cleient Samba sy'n "
-"cael ei ddefnyddio i anfon gwaith argraffu i'r gweinydd Windows. Felly mae'n "
-"bosibl i bob defnyddiwr ar y peiriant i arddangos y cyfrinair ar y sgrin "
-"drwy'r gorchymyn \"ps auxwww\".\n"
-"\n"
-"Rydym yn argymell eich bod yn defnyddio un o'r dulliau gwahanol hyn (yn yr "
-"holl achosion hyn, rhaid i chi wneud yn siŵr mae dim ond peiriannau o'ch "
-"rhwydwaith lleol chi sydd â mynediad i'ch gweinydd Windows, e.e. drwy "
-"gyfrwng mur cadarn).\n"
-"\n"
-"Defnyddio cyfrif heb gyfrinair ar eich gweinydd Windows, defnyddio cyfrif "
-"\"Ymwelydd\" neu gyfrif arbennig ar gyfer argraffu. Peidiwch tynnu eich "
-"amddiffyniad cyfrinair o gyfrif personol na'r cyfrif gweinyddwr.\n"
-"\n"
-"Gosod eich gweinydd Windows i wneud yr argraffydd ar gael o dan brotocol "
-"LPD. Yna gosod argraffu o'r peiriant hwn gyda chyswllt \"%s\" yn "
-"Printerdrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Gosod eich gweinydd Windows i wneud yr argraffydd ar gael o dan brotocol IPP "
-"a gosod argraffu o'r peiriant hwn gyda'r \"%s\" yn Printerdrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Cysylltu eich argraffydd i weinydd Linux a gadael i'ch peiriant/peiriannau "
-"Windows gysylltu iddo fel cleient.\n"
-"\n"
-"Ydych chi am barhau i osod yr argraffydd hwn?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Dewisiadau Argraffydd NetWare"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"I argraffu ar argraffydd NetWare, rhaid i chi roi enw gweinydd argraffu "
-"NetWare (Sylwer! Gall fod yn wahanol i'w enw gwesteiwr TCP/IP) yn ogystal "
-"â'r rhes waith argraffu am yr argraffydd rydych am gael mynediad iddo ac "
-"unrhyw enw defnyddiwr a chyfrinair perthnasol."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Gweinydd Argraffydd"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Enw Rhes Argraffu"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "Mae enw gweinydd NCP ar goll!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "Mae enw rhes NCP ar goll"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", gwesteiwr \"%s\", porth %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr ",Gwesteiwr  \"%s\", porth %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Dewisiadau Argraffydd TCP/Soced"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Dewiswch un o'r argraffyddion sydd wedi eu awtoganfod o'r rhestr neu rhowch "
-"yr enw gwesteiwr neu IP a'r rhif porth dewisol (9100 yw'r rhagosodedig) i'r "
-"meysydd mewnbwn."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"I argraffu i argraffydd TCP neu soced, rhaid i chi ddarparu enw gwesteiwr "
-"neu IP'r argraffydd ac yn ddewisol rhif y porth (Y rhagosodedig yw 9100). Ar "
-"weinyddion HP JetDirect rhif y porth, fel rheol, yw 9100, gall amrywio ar "
-"weinyddion eraill. Gweler llawlyfr eich caledwedd"
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Mae enw'r gwesteiwr argraffu neu IP ar goll!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Enw'r gwesteiwr neu IP yr argraffydd"
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Adnewyddu rhestr Dyfais URI..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "URI Dyfais Argraffu"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Gallwch enwi'n benodol URI i gael mynediad i'r argraffydd. Rhaid i'r URI "
-"gyflawni manylyn un ai CUPS neu Foomatic. Sylwer nad yw pob math o URI cyn "
-"cael eu cynnal gan bob sbwlydd ."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Rhaid cynnig URI dilys!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "Peipio i orchymyn"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Yma gallwch bennu unrhyw fan lle dylid cyfeirio'r gwaith yn lle ei anfon at "
-"yr argraffydd."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Llinell orchymyn"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "Rhaid rhoi llinell gorchymyn!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-"Ar lawer o argraffyddion HP mae yna swyddogaethau arbennig ar gael, cynnal "
-"(gwirio lefel yr inc, glanhau ffroenell, alinio'r pen...) ar inkjets gweddol "
-"ddiweddar, sganio ar ddyfeisiau amlbwrpas, a mynediad at gardiau cof ar "
-"argraffyddion gyda darllenwyr cardiau cof."
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-"I gael mynediad at y swyddogaethau ychwanegol hyn ar eich argraffydd HP, "
-"rhaid ei fod wedi ei osod gyda'r feddalwedd bwrpasol."
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-"Un ai gyda'r HPLIP diweddaraf sy'n caniatáu cynnal argraffydd drwy raglen "
-"graffigol hawdd ei ddefnyddio \"Toolbox\" a phedair ymyl llif llawn ar "
-"fodelau PhotoSmart diweddaraf."
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-"neu gyda'r HPOJ blaenorol sy'n caniatau mynediad at sganiwr a cherdyn cof, "
-"ond gall eich helpu os yw HPLIP yn methu."
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr "Beth yw eich dewis (dewis \"Dim\" ar gyfer rhai heblaw HP)?"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"A yw eich argraffydd yn ddyfais amlbwrpas gan HP neu Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 gyda sganiwr, DeskJet 450, Sony "
-"IJP-V100), HP PhotoSmart neu HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Gosod pecyn %s..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr "Dim ond argraffu bydd yn bosibl ar %s."
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr "Methwyd tynnu eich hen ffeil ffurfweddiad HPOJ %s o'ch %s!"
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr "Tynnwch y ffeil gyda llaw ac ailgychwyn HPLIP"
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Gwirio'r ddyfais a ffurfweddu %s..."
-
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Pa argraffydd hoffech ei osod gyda HPLIP?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Gosod pecynnau SANE..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr "Ni fydd sganio'n bosibl ar %s"
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr "Defnyddio a Chynnal eich %s"
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Gosod pecynnau mtools..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "Ni fydd mynediad i gerdyn cof ar %s yn bosib."
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Sganio eich dyfais amlbwrpas HP"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Mynediad i gerdyn cof ffoto ar eich dyfais HP amlbwrpas"
-
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr "Ffurfweddu dyfais..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Gwneud porth argraffu ar gael ar gyfer CUPS..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Darllen cronfa ddata argraffydd..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Rhowch Enw'r Argraffydd a Sylw"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Dylai enw'r argraffydd gynnwys llythrennau, rhifau a'r tanlinellu, yn unig"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Mae argraffydd \"%s\" yn bodoli eisoes,\n"
-"ydych chi wir eisiau ailysgrifennu ei ffurfweddiad?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-"Mae gan enw argraffydd  \"%s\"  yn fwy na 12 nod. Gall hyn ei wneud yn "
-"amhosib cael mynediad o raglenni Windows. Ydych chi wir am ddefnyddio'r enw "
-"hwnnw?"
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Mae pob argraffydd angen enw (e.e. \"argraffydd\". Nid oes angen llanw "
-"meysydd Disgrifiad a Lleoliad. Lle ar gyfer sylwadau'r defnyddiwr sydd yma."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Enw'r argraffydd"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Disgrifiad"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Lleoliad"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Paratoi cronfa ddata argraffydd..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Model eich argraffydd"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Mae Printerdrake wedi cymharu'r enw model yn sgil yr awto ganfod gyda'r "
-"modelau sy'n cael eu rhestri yn ei gronfa ddata i gael y ffurfweddiad gorau. "
-"Gall y dewis fod yn anghywir, yn arbennig os nad yw eich argraffydd yn cael "
-"ei enwi yn y gronfa ddata. Felly, edrychwch i weld â yw'r dewis yn gywir a "
-"chliciwch \"Model cywir\" os yw ac os nad yw, cliciwch \" Dewiswch y model "
-"gyda llaw\" fel bo modd i chi ddewis eich argraffydd gyda llaw ar y sgrin "
-"nesaf.\n"
-"\n"
-"Ar gyfer eich argraffydd mae Printerdrake wedi canfod\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Mae'r model yn gywir"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Dewiswch y model gyda llaw"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Gwiriwch os yw Printerdrake wedi awto ganfod eich argraffydd yn gywir. "
-"Chwiliwch am y model cywir pan fo'r cyrchwr yn sefyll ar y model anghywir "
-"neu ar \"Argraffydd bras\"."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "Gosod ffeil PPD gan y cynhyrchwyr"
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-"Mae pob argraffydd PostSgript yn cael ei ddarparu gyda ffeil PPD sy'n "
-"disgrifio dewisiadau a nodweddion yr argraffydd."
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"Fel rheol mae'r ffeil ar CD sy'n cynnwys gyrwyr Windows a Mac sy'n dod "
-"gyda'r argraffydd."
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr "Gallwch ganfod y ffeiliau PPD ar safle gwe'r gwneuthurwr."
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"Ow yw Windows wedi ei osod ar eich peiriant , mae'r ffeil PPD i'w gael ar "
-"eich rhaniad Windows, hefyd."
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-"Mae gosod a defnyddio'r ffeil PPD wrth osod yr argraffydd am y tro cyntaf yn "
-"gwneud pob dewis ar gael sy'n cydweddu gyda chaledwedd yr argraffydd."
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"Yma cewch ddewis y ffeil PPD i'w osod ar eich peiriant, i'w ddefnyddio ar "
-"gyfer gosod eith peiriant."
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "Gosod ffeil PPD o"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "Disg Meddal"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "Man arall"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "Dewis ffeil PPD"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "Nid yw ffeil PPD %s yn bodoli neu nid yw'n ddarllenadwy!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "Nid yw'r ffeil PPD %s yn cyd-fynd â manyleb PPD!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "Gosod ffeil PPD..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Ffurfweddiad OKI winprinter "
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Rydych yn ffurfweddu winprinter laser OKI. Mae'r argraffydd hwn\n"
-"yn defnyddio protocol cyfathrebu arbennig. Dim ond trwy eu cysylltu â'r "
-"porth paralel cyntaf mae modd cael yr argraffydd hwn i weithio. Pan fo eich "
-"argraffydd wedi ei gysylltu i borth arall neu i flwch gweinydd argraffu, "
-"cysylltwch yr argraffydd i'r porth paralel cyntaf cyn argraffu tudalen "
-"brawf. Os na wnewch chi hynny, ni fydd yr argraffydd yn gweithio. Bydd eich "
-"gosodiad ynghylch y math o gysylltiad yn cael ei anwybyddu gan y gyrrwr."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Ffurfweddiad inkjet Lexmark"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
-"argraffyddion lleol, yn unig. Cysylltwch eich argraffydd i borth lleol neu "
-"ffurfweddwch ef i'r peiriant mae'n gysylltiedig ag ef."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"I fedru argraffu gyda eich argraffydd inkjet Lexmark a'r ffurfweddiad hwn, "
-"bydd angen gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark (http://"
-"www.lexmark.com/). Ewch i'w safle yn yr UDA a chliciwch ar y botwm \"Drivers"
-"\". Yna dewiswch eich model ac yna \"Linux\" fel system weithredu. Mae'r "
-"gyrwyr yn dod fel pecynnau RPM neu sgriptiau cragen gyda gosodiad graffigol "
-"rhyngweithiol. Nid oes angen i chi wneud y ffurfweddiad drwy'r wyneb "
-"graffigol. Diddymwch yn syth wedi'r cytundeb trwyddedu. Yna argraffwch "
-"dudalennau'r alinio'r pen argraffu gyda \"lexmarkmaintain\" a newid "
-"gosodiadau aliniad y pen gyda'r rhaglen."
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Ffurfweddiad Lexmark 125"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Mae'r gyrwyr argraffydd inkjet sydd wedi eu darparu gan Lexmark yn cynnal "
-"argraffyddion lleol, yn unig wedi eu cysylltu drwy USB, dim argraffyddion ar "
-"beiriannau pell na blychau gweinydd argraffu.. Cysylltwch eich argraffydd i "
-"borth USB lleol neu ei ffurfweddu i'r peiriant mae wedi ei  gysylltu iddo."
-
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Ffurfweddiad Samsung ML/QL-85G"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Mae'r gyrwyr yr argraffydd yma'n cynnal argraffyddion lleol, yn unig wedi eu "
-"cysylltu drwy 'r porth paralel cyntaf, dim argraffyddion ar beiriannau pell "
-"na blychau gweinydd argraffu ar byrth parallel eraill.  Cysylltwch eich "
-"argraffydd i'r porth paralel cyntaf neu ei ffurfweddu i'r peiriant mae wedi "
-"ei  gysylltu iddo."
-
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Ffurfweddiad Canon LBP-460/660"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Llwytho Cadarnwedd i Fyny ar gyfer HP LaserJet 1000"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Gosodiadau rhagosodedig yr argraffydd\n"
-"\n"
-"Dylech wneud yn siwr fod maint y dudalen a'r modd math inc/argraffu (os ar "
-"gael) a hefyd bod ffurfweddiad caledwedd argraffyddion laser (cof, uned "
-"ddeublyg, blychau papur ychwanego) wedi eu gosod yn gywir. Sylwer bod fod "
-"argraffiad ansawdd/cydraniad uchel iawn yn gallu arafu'r argraffu'n "
-"sylweddol.."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Gosod yr Argraffydd Rhagosodedig"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Rhaid i ddewis %s fod yn gyfanrif"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Rhaid i ddewis %s fod yn rhif!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Dewis %s allan o amrediad!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ydych chi am osod argraffydd  (\"%s\")\n"
-"fel yr argraffydd rhagosodedig?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Tudalennau prawf"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Dewiswch y tudalennau prawf rydych am eu hargraffu\n"
-"Sylwer: gall tudalen brawf llun camera gymryd cryn dipyn o amser cyn cael ei "
-"argraffu ac ar argraffydd laser heb lawer o gof mae'n bosibl na ddaw o gwbl. "
-"Yn y rhan fwyaf o achosion, mae'r dudalen prawf safonol yn ddigonol."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Dim tudalennau prawf"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Argraffu"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Tudalen prawf safonol"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Prawf tudalen arall (Llythyr)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Prawf tudalen arall (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Tudalen prawf llun"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Peidiwch argraffu tudalennau prawf"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Argraffu tudalen(nau) prawf..."
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr "Osgoi prawf llun ffoto"
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Mae tudalennau prawf wedi eu hanfon i'r argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-"Statws argraffu:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Mae tudalen(nau) prawf wedi eu hanfon at yr argraffydd.\n"
-"Gall gymryd amser cyn i'r argraffydd gychwyn.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "A weithiodd hwnnw'n iawn?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Argraffydd bras"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr derfynell) mae modd "
-"defnyddio un ai'r gorchymyn \"%s <file>\" neu offeryn argraffu graffigol: "
-"\"xpp <file>\" neu \"kprinter <file>\". Mae'r offeryn graffigol yn caniatáu "
-"chi ddefnyddio'r argraffydd ac i newid gosodiadau dewis yn hawdd.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchmynion hyn ym maes \"Gorchmynion Argraffu\" y "
-"deialogau argraffu mewn nifer o raglenni, ond  yma nid ydynt yn darparu'r "
-"enw ffeil am fod y ffeil i'r argraffydd yn cael ei ddarparu gan y rhaglen.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Mae'r gorchymyn \"%s\" hefyd yn caniatau i newid y gosodiadau dewis ar gyfer "
-"tasg argraffu penodol. Ychwanegwch y gosodiadau angenrheidiol i'r llinell "
-"gorchymyn, e.e \"%s <file>\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"I wybod am y dewisiadau sydd ar gael ar gyfer yr argraffydd, darllenwch un "
-"ai'r rhestr isod neu cliciwch ar y botwm \"Rhestr dewis argraffu\".%s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Dyma restr o'r dewisiadau argraffu sydd ar gael ar gyfer yr argraffydd "
-"presennol:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynell) defnyddiwch "
-"orchymyn \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Mae modd defnyddio'r gorchymyn hwn ym maes \"Gorchymyn argraffu\" deialog "
-"nifer o raglenni. Ond peidiwch â rhoi'r enw ffeil yma oherwydd bod y ffeil "
-"i'w argraffu wedi ei ddarparu gan y rhaglen.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"I edrych ar y rhestr o'r dewisiadau sydd ar gael ar gyfer yr argraffydd "
-"cyfredol cliciwch ar fotwm \"Rhestr dewisiadau argraffu\"."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"I argraffu ffeil o'r llinell orchymyn (ffenestr terfynell) defnyddiwch y "
-"gorchymyn \"%s <file>\" neu \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Mae modd hefyd i ddefnyddio rhag wyneb graffigol \"xpdq\" i osod dewisiadau "
-"a thrin gwaith argraffu.\n"
-"\n"
-"Os ydych yn defnyddio KDE fel amgylchedd pen bwrdd mae gennych \"botwm "
-"argyfwng\", eicon ar y bwrdd gwaith, wedi ei labelu \"Atal yr Argraffydd!\", "
-"fydd yn stopio 'r holl waith argraffu'n syth pan fyddwch yn ei glicio. Mae "
-"hyn yn ddefnyddiol pan fydd y papur wedi mynd yn sownd, ag ati.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Mae'r gorchmynion \"%s\" a \"%s\" hefyd yn caniatáu newid y gosodiadau dewis "
-"ar gyfer tasg argraffu benodol. Ychwanegwch y gosodiadau angenrheidiol i'r "
-"llinell gorchymyn, e.e \"%s <file>\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Argraffu/Sganio/Cardiau Llun ar  \"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Argraffu/Sganio ar  \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Argraffu/Mynediad Cardiau Llun ar  \"%s\""
-
-#: printer/printerdrake.pm:3896
-#, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Defnyddio/Cynnal argraffydd \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Argraffu ar argraffydd \"%s\""
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Rhestr ddewis argraffu"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-"Mae eich %s wedi ei osod gyda meddalwedd HPLIP HP. Fel hyn bydd nifer o "
-"nodweddion arbennig eich argraffydd yn cael eu cynnal.\n"
-"\n"
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-"Mae modd defnyddio'r sganiwr yn eich argraffydd gyda'r feddalwedd SANE "
-"arferol, ee Kooka neu XSane (Y ddau yn newislen Amlgyfrwng/Graffigau). "
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-"Rhedwch Scannerdrake (Caledwedd/Sganiwr yng Nghanolfan Rheoli Mandriva "
-"Linux) i rannu eich sganiwr ar y rhwydwaith.\n"
-"\n"
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-"Mae modd cael mynediad i'r darllennydd cerdyn cof ar eich argraffydd drwy'r "
-"ddyfais storio USB arferol."
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-"Ar ôl gosod cerdyn bydd eicon disg caled yn ymddangos ar eich bwrdd gwaith i "
-"awgrymu mynediad\n"
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-"Mae modd cael mynediad at ddarllenydd cerdyn ar eich argraffydd drwy "
-"ddefnyddio Printer Toolbox HP (Dewislen: System/Monitro/HP Printer Toolbox) "
-"gan glicio ar fotwm \"Mynediad at Gardiau Ffoto..\" yn y tab \"Swyddogaethau"
-"\"."
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-"Sylwch fod hyn yn araf iawn, mae darllen y lluniau o'r camera neu gerdyn USB "
-"fel arfer yn gynt.\n"
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-"Mae Printer Toolbox HP (Dewislen: System/Monitro/Printer Toolbox HP) yn "
-"cynnig llawer o swyddogaethau monitro statws a chynnal ar gyfer eich %s:\n"
-"\n"
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr " - Lefel inc/statws\n"
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr " - Glanhau ffroenell inc\n"
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr " - Aliniad pen argraffydd\n"
-
-#: printer/printerdrake.pm:3944
-#, c-format
-msgid " - Color calibration\n"
-msgstr " - Calibro lliw\n"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"Mae eich dyfais aml bwrpas wedi cael ei ffurfweddu'n awtomatig i fedru "
-"sganio. Mae modd i chi sganio gyda \"scanimage\" (\"scanimage -d hp:%s\" i "
-"bennu pa un os oes gennych fwy nag un) o'r llinell orchymyn neu gyda rhag "
-"wynebau graffigol  \"xscanimage\" neu \"xsane\". Os ydych yn defnyddio GIMP, "
-"gallwch sganio hefyd, drwy ddewis y man priodol yn y ddewislen \"Ffeil\"/"
-"\"Cipio\". Galwch hefyd \"man scanimage\" ar y llinell orchymyn i dderbyn "
-"mwy o wybodaeth.\n"
-"\n"
-"Peidiwch defnyddio \"scannerdrake\" ar gyfer gosod scanio ar y ddyfais hon, "
-"dim ond defnyddio \"scannerdrake\" os ydych am rannu'r sganiwr ar y "
-"rhwydwaith."
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Mae eich argraffydd wedi ei ffurfweddu'n awtomatig i roi mynediad i chi i'r "
-"gyrrwr cerdyn llun o’ch cyfrifiadur. Mae modd i chi gael mynediad at eich "
-"cardiau llun drwy'r rhaglen graffigol \"MtoolsFM\" (Dewislen: \"Rhaglenni\" -"
-"> \"Offer ffeil\" -> \"Rheolwr Ffeiliau MTools\") neu ar y llinell "
-"orchymyn:  \"mtools\" (\"man mtools\" am ragor o wybodaeth) Bydd ys system o "
-"dan yrrwr \"p\", neu lythrennau canlynol pan fydd gennych fwy nag un "
-"argraffydd HP gyda gyrwyr cerdyn llun. Yn _MToolsFM\" mae modd newid rhwng "
-"llythrennau gyrwyr drwy'r maes ar ben uchaf de'r rhestr."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Trosglwyddo ffurfweddiad yr argraffydd"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Mae modd i chi gopïo ffurfweddiad yr argraffydd fel gwnaethoch o yspwlydd %s "
-"i %s eich yspwlydd cyfredol. Bydd yr holl ddata ffurfweddi (enw argraffydd, "
-"disgrifiad, lleoliad, math o gysylltiad â gosodiadau dewis rhagosodedig) yn "
-"cael eu trosi, ond ni fydd y gwaith argraffu'n cael eu trosi.\n"
-"Ni fydd yr holl waith argraffu'n cael eu trosi, am y rhesymau canlynol:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"Nid yw CUPS yn cefnogi argraffyddion ar weinyddion Novell neu argraffyddion "
-"sy'n anfon data mewn gorchymyn ffurf -rhydd.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"Mae PDQ yn cynnal argraffyddion lleol,  LDP pell, a Socket/TCP, yn unig.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Nid yw LPD na LPRng yn cynnal argraffyddion IPP.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Yn ogystal, nid oes modd trosglwyddo rhesi a grëwyd gan y rhaglen hon na "
-"\"foomatic-configure\"."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Hefyd nid oes modd trosglwyddo argraffyddion ffurfweddwyd gyda ffeiliau PPD "
-"ddarparwyd gan eu gwneuthurwyr na gyrrwyr CUPS brodorol."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Nodwch yr argraffydd rydych am ei drosglwyddo a chliciwch\n"
-"\"Trosglwyddo\"."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Peidio trosglwyddo argraffydd"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Trosglwyddo"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Mae argraffydd o'r enw \"%s\" yn bodoli eisoes yn %s.\n"
-"Cliciwch \"Trosglwyddo\" i ysgrifennu drosto.\n"
-"Mae modd i chi osod enw newydd arno neu ei hepgor."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Enw'r argraffydd newydd"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "Trosglwyddo %s..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Rydych wedi trosglwyddo eich argraffydd rhagosodedig blaenorol rhagosodedig "
-"(\"%s\"). A ddylai fod yn argraffydd rhagosodedig y system argraffu newydd %"
-"s ?"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Adnewyddu data'r argraffydd..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Cychwyn y rhwydwaith..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Ffurfweddwch y rhwydwaith"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Nid yw swyddogaethau'r rhwydwaith wedi ei ffurfweddu"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Ydych chi am ffurfweddi argraffydd pell. Mae hyn angen mynediad ar "
-"rwydwaith, ond nid yw eich rhwydwaith wedi ei ffurfweddu eto. Os ydych am "
-"fynd ymlaen heb ffurfweddiad rhwydwaith, ni fydd modd i chi ddefnyddio'r "
-"argraffydd rydych yn ei ffurfweddu ar hyn o bryd. Beth ydych am ei wneud?"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Parhau heb ffurfweddu'r rhwydwaith"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"Nid oes modd cychwyn y ffurfweddiad rhwydwaith wnaed yn ystod y gosodiad. "
-"Gwiriwch p'un ai yw'r rhwydwaith yn darparu mynediad ar ôl cychwyn eich "
-"system a chywiro'r ffurfweddiad gan ddefnyddio Canolfan Rheoli %s, adran "
-"\"Rhwydwaith a'r Rhyngrwyd\"/\"Cysylltiad\", ac yna gosod yr argraffydd, eto "
-"gan ddefnyddio Canolfan Rheoli %s, adran \"Caledwedd\"/\"Argraffydd\""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Nid oedd mynediad i'r rhwydwaith yn rhedeg ac nid oedd modd ei gychwyn. "
-"Gwiriwch eich ffurfweddiad a'ch caledwedd. Yna ceisiwch ail ffurfweddi eich "
-"argraffydd."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Ailgychwyn system argraffu..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "uchel"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "Paranoia"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Gosod system argraffu yn lefel diogelwch %s"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Rydych ar fin gosod system argraffu %s ar system sy'n rhedeg lefel diogelwch "
-"%s. \n"
-"\n"
-"Mae'r system yn rhedeg daemon (proses gefndirol) sy'n aros am waith argraffu "
-"ac yna yn eu trin. Mae'r daemon hefyd yn gyraeddadwy gan beiriannau pell "
-"drwy'r rhwydwaith ac felly'n bwynt ymosod. Felly, dim ond ychydig o "
-"ddaemonau sy'n cael eu cychwyn yn rhagosodedig, ar y lefel diogelwch hwn.\n"
-"\n"
-"Ydych chi wir eisiau ffurfweddu argraffu ar y peiriant hwn?"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Cychwyn y system argraffu wrth gychwyn y cyfrifiadur"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Ni fydd system argraffu (%s) yn cychwyn yn awtomatig pan fydd y peiriant yn "
-"cael ei gychwyn.\n"
-"\n"
-"Mae'n bosibl fod y cychwyn awtomatig wedi ei ddiffodd wrth newid i lefel "
-"diogelwch uwch, am fod a system argraffu'n bwynt tebygol ar gyfer "
-"ymosodiadau.\n"
-"\n"
-"Ydych chi am i'r cychwyn awtomatig gael ei droi ymlaen eto?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "Gwirio'r meddalwedd sydd wedi ei osod..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Tynnu %s..."
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Methu tynnu'r system argraffu %s!"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "Gosod %s..."
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Methu gosod system argraffu %s!"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"Yn y modd hwn nid oes system argraffu a bydd yr holl geisiadau argraffu'n "
-"mynd yn syth i'r gweinydd enwyd isod. Sylwch na fydd yn bosib diffinio rhesi "
-"argraffu lleol ac os bydd y gweinydd hwnnw i lawr nid oes modd ei argraffu "
-"o'r peiriant hwn."
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-"Rhowch yr enw gwesteiwr neu IP eich gweinydd CUPS a chlicio Iawn os ydych am "
-"ddefnyddio'r modd yma, cliciwch \"Gadael\" fel arall."
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "Gwesteiwr neu IP ar weinydd pell:"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Gosod yr Argraffydd Rhagosodedig"
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "System argraffu CUPS lleol neu weinydd CUPS pell?"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr "Mae modd defnyddio system argraffu CUPS mewn dwy ffordd:"
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr "1. Mae modd rhedeg system argraffu CUPS yn lleol."
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-"Yna mae modd defnyddio argraffyddion wedi eu cysylltu'n lleol ac mae modd "
-"canfod argraffyddion pell ar weinyddion CUPS eraill ar yr un rhwydwaith, yn "
-"awtomatig."
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-"Anfantais hyn yw, bod angen mwy o adnoddau ar beiriannau lleol. Rhaid gosod "
-"pecynnau meddalwedd ychwanegol, rhaid rhedeg daemon CUPS yn y cefndir ac mae "
-"angen peth cof, ac mae porth IPP (porth 631) ar agor."
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-"2. Bydd pob cais argraffu'n cael ei anfon yn syth at weinydd CUPS pell."
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-"Yma mae defnydd adnoddau lleol yn cael ei leihau. Ni fydd daemon CUPS yn "
-"cael ei gychwyn na phorth yn cael ei hagor, nid oes strwythur meddalwedd yn "
-"cael ei osod i drin rhesi argraffu, felly mae llai o gof a lle ar ddisg yn "
-"cael ei ddefnyddio."
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-"Yr anfantais yw nad oes modd diffinio argraffyddion lleol ac os yw'r "
-"gweinydd hwnnw i lawr nid oes modd argraffu o'r peiriant hwn."
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr "Sutddylai CUPS gael ei osod ar eich peiriant?"
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr "Gweinydd pell, rhowch Enw neu IP yma:"
-
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr "System argraffu CUPS lleol"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Dewiswch Sbwlydd Argraffydd"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Pa system argraffu(sbwlydd) ydych chi am ei ddefnyddio?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Methu ffurfweddu argraffydd \"%s\"!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Gosod Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "Methu gosod pecynnau %s, methu cychwyn %s!"
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Mae'r argraffyddion canlynol wedi eu ffurfweddu. Cliciwch ar un i newid ei "
-"osodiadau; ei wneud yn argraffydd rhagosodedig; i edrych am wybodaeth amdano."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Arddangos pob  argraffydd CUPS pell sydd ar gael"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Adnewyddu rhestr argraffyddion (dangos pob argraffydd CUPS pell sydd ar gael)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "Ffurfweddiad CUPS"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Newidiwch y system argraffu"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Modd Arferol"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Modd Uwch"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Dewisiadau argraffydd"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Newid ffurfweddiad yr argraffydd"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Argraffydd %s%s\n"
-"Beth ydych am ei newid ar yr argraffydd hwn?"
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "Mae'r argraffydd wedi ei anablu"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Gwna!!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Math o gyswllt argraffydd"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Enw'r argraffydd, disgrifiad, lleoliad"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Gwneuthurwr yr argraffydd, model, gyrrwr"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Gwneuthurwr yr argraffydd, model"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Gosod yr argraffydd fel y rhagosodedig"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "Galluogi'r argraffydd"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "Anablu'r Argraffydd"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Argraffu tudalennau prawf"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Gwybod sut i ddefnyddio'r argraffydd"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Tynnu argraffydd"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Tynnu hen argraffydd \"%s\"..."
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Mae argraffydd\"%s\" wedi ei alluogi"
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Mae argraffydd \"%s\" wedi ei anablu"
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ydych chi wir eisiau tynnu argraffydd \"%s\""
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Tynnu argraffydd \"%s\"..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Argraffydd rhagosodedig"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Mae argraffydd \"%s\" wedi ei osod fel yr argraffydd rhagosodedig."
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Methu ychwanegu rhaniad to_formatted_RAID%s"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Dim digon o raniadau ar gyfer RAID lefel %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "Methu creu cyfeiriadur /usr/share/sane/firmware!"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "Methu creu cyswllt /usr/share/sane/%s!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr "Methu copïo ffeil cadarnwedd %s i /usr/share/sane/firmware!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "Methu gosod caniatâd ffeiliau cadarnwedd %s!"
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr "Methu gosod y pecyn sydd ei angen i rannu eich sganiwr(wyr)."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr "Ni fydd eich sganiwr(wyr) ar gael ar gyfer defnyddwyr anwraidd"
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "Caniatáu/Gwrthod negeseuon gwall IPv4 ffug."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr "Caniatáu/Gwrthod darlledu atsain icmp."
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr "Caniatáu/Gwrthod atsain icmp."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Caniatáu Gwrthod awto mewngofnodi."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"Os yw \"ALL\"yn caniatáu /etc/issue a /etc/issue.net i fodoli.\n"
-"\n"
-"Os yw \\fIarg\\fP = NONE\n"
-"\n"
-"Dim materion heblaw caniatáu  /etc/issue."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "Caniatáu/Gwrthod ailgychwyn cyfrifiadur gan ddefnyddiwr y consol."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Caniatáu/Gwrthod mewngofnodi gwraidd pell"
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Caniatáu/Gwrthod mewngofnodi gwraidd uniongyrchol."
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Caniatáu/Gwrthod rhestr defnyddwyr ar y system ar reolwyr arddangos (kdm and "
-"gdm)."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-"Caniatáu/gwrthod allforio dangosiad\n"
-"wrth basio o gyfrif root i ddefnyddiwr arall.\n"
-"\n"
-"Gw. am_xauth(8) a, ragor o fanylion.'"
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"Caniatáu/Gwrthod cysylltiadau X.:\n"
-"\n"
-"- ALL (caniatáu pob cysylltiad),\n"
-"\n"
-"- LOCAL (dim ond cysylltiadau lleol)\n"
-"-  NONE (dim cysylltiadau)"
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"Mae'r ymresymiad yn pennu os oes gan y defnyddiwr ganiatâd i gysylltu\n"
-"gyda'r  gweinydd X porth  tcp 6000 neu beidio."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"Ymresymiadau: (arg)\n"
-"\n"
-"- pob gwasanaeth sy'n cael ei reoli gan tcp_wrappers (gw. hosts.deny(5) man "
-"page) os wedi ei osod i \"ALL\",\n"
-"\n"
-"\n"
-" Dim ond rhai lleol os wedi eu gosod i \"LOCAL\"\n"
-"\n"
-"- dim os wedi eu gosodi i NONE. I ganiatáu'r gwasanaethau sydd eu hangen, "
-"defnyddiwch /etc/hosts.allow (gw. hosts.allow(5))."
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"Os yw SERVER_LEVEL (neu SECURE_LEVEL os yn absennol)\n"
-"yn fwy na 3  yn /etc/security/msec/security.conf, creu'r symlink /etc/\n"
-"security/msec/server i bwyntio at /etc/security/msec/server.\n"
-"<SERVER_LEVEL>. \n"
-"Mae /etc/security/msec/server yn cael ei ddefnyddio gan chkconfig --add\n"
-"at i benderfynu ychwanegu gwasanaeth os yw ar gael yn y\n"
-"ffeil wrth osod y pecynnau"
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"Galluogi/Analluogi crontab ac at ar gyfer defnyddwyr.\n"
-"\n"
-" Rhoi defnyddwyr â chaniatâd yn /etc/cron.allow a  /etc/at.allow\n"
-" (gw. man yn(1) a crontab(1))."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr "Galluogi/Analluogi adroddiadau Salig i gonsol 12"
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"Galluogi/Analluogi amddiffyn spwffio datrys enw. Os yw\n"
-"\"%s\" yn wir, adrodd i syslog."
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Rhybuddion Diogelwch:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "Galluogi/Analluogi amddiffyn sbwlio IP"
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "Galluogi/Analluogi libsafe os yw ar y system."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "Galluogi/Analluogi mewngofnodi pecynnau anarferol IPv4."
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Galluogi/Analluogi gwiriad diogelwch msec bob awr."
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-" Galluogi su o aelodau grŵp olwyn yn unig neu ganiatáu su o unrhyw "
-"ddefnyddiwr."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "Defnyddio cyfrinair i wirio defnyddwyr."
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr "Galluogi/Analluogi gwiriad cymysgaredd cardiau ethernet."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr "Galluogi/Analluogi gwiriad diogelwch dyddiol."
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr "Galluogi/Analluogi sulogin(8 mewn defnydd defnyddiwr unigol."
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr "Ychwanegu'r enw fel eithriad i drin cyfrinair yn erbyn msec."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-"Gosod cyfrinair yn erbyn \"max\" dyddiau ac oedi i newid i \"inactive\"."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr "Gosod hyd hanes cyfrinair i rwystro ail ddefnyddio'r cyfrinair."
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Gosod lleiafswm hyd gyfrinair a lleiafswm digidau a lleiafswm llythrennau "
-"mawr."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Gosod gwraidd umask."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "os wedi ei osod i iawn, gwirio pyrth agored."
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"os wedi ei osod i iawn,  gwirio am:\n"
-"\n"
-"-  gyfrinair gwag\n"
-"\n"
-"- dim cyfrinair yn /etc/shadow\n"
-"\n"
-"- defnyddwyr eraill gydag enw 0 ar wahân i wraidd."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"os wedi ei osod i iawn, gwirio caniatâd ffeiliau yng nghartref y defnyddiwr."
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"os wedi ei osod i iawn, gwirio os yw'r dyfeisiau rhwydwaith mewn modd cymysg"
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "os wedi ei osod i iawn, rhedeg y gwiriadau diogelwch dyddiol."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "os wedi ei osod i iawn, gwirio ychwanegiadau/tynnu ffeiliau sgid."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "os wedi ei osod i iawn, gwirio cyfrinair gwag y  /etc/shadow."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "os wedi ei osod i iawn, gwirio checksum y ffeiliau suid/sgid."
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"os wedi ei osod i iawn, , gwirio ychwanegu/tynnu ffeiliau gwraidd suid."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "os wedi ei osod i iawn, adrodd ar ffeiliau heb berchennog."
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"os wedi ei osod i iawn, gwirio ffeiliau/cyfeiriaduron ysgrifennadwy gan bawb."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "os wedi ei osod i iawn,  gwirio gyda chkrootkit."
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"os wedi ei osod, anfon yr adroddiad e-bost i'r cyfeiriad e-bost neu ei anfon "
-"i'r gwraidd."
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "os wedi ei osod i iawn, adrodd y gwirio drwy e-bost"
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "Peidio anfon e-byst os nad oes dim i rybuddio amdano"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "os wedi ei osod i iawn,  gwirio yn erbyn y gronfa ddata rpm."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "os wedi ei osod i iawn, adrodd y gwirio i syslog."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "os wedi ei osod i iawn, adrodd adroddiadau gwirio i tty."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr "Gosod maint hanes gorchymyn cragen. Gwerth -1 yn golygu diderfyn."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "Gosod amser allan y gragen. Gwerth sero'n golygu dim amser allan."
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "Enwi enw'r ail uned."
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Gosod umasg y defnyddiwr"
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Derbyn negeseuon gwall IPv4 ffug."
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Derbyn darllediad atsain icmp"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "Derbyn atsain icmp"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* yn bodoli"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "Tarfu ar y broses gan y defnyddiwr"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Caniatáu mewngofnodi gwraidd pell"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "Mewngofnodi gwraidd uniongyrchol"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-"Caniatáu/Gwrthod rhestr defnyddwyr ar y system ar reolwyr arddangos (kdm and "
-"gdm)."
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr "Allforio dangosiad wrth basio o root i ddefnyddwyr eraill"
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "Caniatáu cysylltiadau XWindows"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "Caniatáu cysylltiad TCP i XWindows"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "Awdurdodi pob gwasanaeth wedi ei reoli gan tcp_wrappers"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Chkconfig yn ufudd i reolau msec"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "Galluogi \"crontab\" a \"at\" ar gyfer defnyddwyr"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "Adroddiad syslog i gonsol 12"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "Amddiffyniad ffugio cydraniad enw"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "Galluogi amddiffyn sbwlio IP"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "Galluogi/Analluogi libsafe os yw ar y system."
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "Galluogi mewngofnodi pecynnau anarferol IPv4."
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "Galluogi/Analluogi gwiriad diogelwch msec bob awr."
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-"Galluogi su o aelodau grŵp olwyn yn unig neu ganiatáu su o unrhyw "
-"ddefnyddiwr."
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "Defnyddio cyfrinair i wirio defnyddiwr."
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "Gwiriad cymysgaredd cardiau ethernet."
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "Gwiriad diogelwch dyddiol"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "Sulogin(8 ar lefel defnyddiwr unigol."
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Dim cyfrinair eto ar gyfer"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr "Gosod terfyn cyfrinair ac oediad anactifiad cyfrif"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Hyd gyfrinair hanes"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "Hyd byrraf cyfrinair a'r nifer o rifau a llythrennau mawr"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "umask gwraidd"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Maint hanes cragen"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Goramser cragen"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "Masc defnyddwyr"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Gwirio pyrth agored"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "Gwiriwch am gyfrifon anniogel."
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "Gwirio caniatâd ffeiliau yng nghartref y defnyddiwr."
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "Gwirio os yw'r dyfeisiau rhwydwaith mewn modd cymysgaredd"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Rhedeg y gwiriadau diogelwch dyddiol."
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "Gwirio ychwanegiadau/tynnu ffeiliau sgid."
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "Gwiriwch gyfrinair gwag y  /etc/shadow."
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "Gwirio checksum y ffeiliau suid/sgid."
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "Gwirio ychwanegu/tynnu ffeiliau gwraidd suid."
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "Adrodd ar ffeiliau heb berchennog."
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Gwirio ffeiliau/cyfeiriaduron ysgrifennadwy gan bawb."
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "Rhedeg gwirio gyda chkrootkit."
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "Peidiwch anfon e-byst pan nad oes angen"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"Os wedi ei osod, anfon yr adroddiad e-bost i'r cyfeiriad e-bost neu ei anfon "
-"i'r gwraidd."
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "Adrodd y gwirio drwy e-bost"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "Gwirio yn erbyn y gronfa ddata rpm."
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Adrodd y gwirio i syslog."
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Adrodd adroddiadau gwirio i tty."
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Croeso i Crackers"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Gwael"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Uchel"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Uwch"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoia"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Rhaid defnyddio'r lefel hwn gyda gofal. Mae'n gwneud eich system yn haws ei\n"
-"ddefnyddio ond mae'n sensitif iawn: rhaid peidio defnyddio'r peiriant i'w\n"
-"gysylltu ag eraill nag i'r Rhyngrwyd. Does dim cysylltiad drwy gyfrinair."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Mae'r cyfrinair wedi ei alluogi, ond ni argymhellir ei ddefnyddio fel "
-"cyfrifiadur rhwydwaith."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dyma'r safon sy'n cael ei argymell ar gyfer diogelwch cyfrifiadur fydd yn "
-"cael ei gysylltu â'r Rhyngrwyd fel cleient."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Mae rhai cyfyngiadau, ac mae rhagor o wiriadau awtomatig yn cael eu rhedeg "
-"bob nos"
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Gyda'r lefel diogelwch hwn, mae defnydd y system fel gweinydd yn bosibl.\n"
-"Mae diogelwch yn ddigon uchel i ddefnyddio'r system fel gweinydd sy'n "
-"derbyn\n"
-"cysylltiad gan amryw o gleientiaid. Sylwer: os mae i gleient yn unig yw eich "
-"peiriant ar y Rhyngrwyd, yna mae'n well i chi ddewis lefel is."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Wedi ei seilio ar y lefel flaenorol, ond mae'r system yn hollol gaeedig ac "
-"mae nodweddion diogelwch ar eu uchaf."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Dewisiadau Sylfaenol DrakSec"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Dewiswch lefel diogelwch"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Lefel diogelwch"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Defnyddiwch libsafe ar gyfer gweinyddion"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Llyfrgell sy'n diogelu rhag gorlif byffer ac ymosodiadau llinellau fformatio."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Gweinyddwr Diogelwch (mewngofnodi neu e-bost)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Cychwynnwch system sain ALSA (Pensaernïaeth Sain Linux Uwch)"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron trefnydd gorchymyn cyfnodol"
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Mae apmd yn cael ei ddefnyddio i fonitro statws y batri a mewngofnodi drwy\n"
-"syslog. Mae modd ei ddefnyddio i gau'r peiriant pan mae'r batri'n isel."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Mae'n rhedeg gorchmynion wedi eu trefnu gan y gorchymyn at ar amser wedi \n"
-"ei bennu pan oedd at yn rhedeg, gan redeg gorchmynion swp pan fydd \n"
-"cyfartaledd y llwyth yn ddigon isel."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Mae cron yn rhaglen safonol yn UNIX sy'n rhedeg rhaglenni sydd wedi eu \n"
-"pennu gan y defnyddiwr ar adegau penodol. Mae vixie cron yn ychwanegu \n"
-"nifer o ychwanegiadau i'r UNIX cron sylfaenol, yn cynnwys gwell diogelwch \n"
-"a dewisiadau ffurfweddu mwy pwerus."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"Mae FAM yn ddaemon monitro ffeiliau. Mae'n cael ei ddefnyddio i adrodd pan "
-"fo ffeiliau'n newid.\n"
-"Mae'n cael ei ddefnyddio gan GNOME a KDE"
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Mae GPM yn ychwanegu cefnogaeth ar gyfer llygoden i raglenni testun Linux \n"
-"megis, Midnight Commander. Mae hefyd yn caniatáu gweithrediadau torri a \n"
-"gludo consol llygoden, gan gynnwys cefnogaeth ar gyfer bryslenni yn y "
-"consol. "
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Mae HardDrake yn rhedeg archwiliwr caledwedd, a gall yn ôl \n"
-"eich dewis, ffurfweddu caledwedd newydd neu sydd wedi newid."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Mae Apache yn weinydd y We Fyd Eang. Mae'n cael ei ddefnyddio i wasanaethu "
-"ffeiliau HTML a CGI."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Mae daemon uwchwasanaethwr rhyngrwyd (inetd) yn cychwyn nifer\n"
-"o wasanaethau rhyngrwyd eraill, yn ôl y galw. Mae'n gyfrifol am gychwyn\n"
-"nifer o wasanaethau, gan gynnwys telnet, ftp, rsh a rlogin. Mae analluogi \n"
-"inetd yn analluogi'r holl wasanaethau mae'n gyfrifol amdanynt."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Cychwyn hidlydd pecynnau ar gyfer cnewyllyn cyfres Linux 2.2 \n"
-"i greu mur gwarchod i amddiffyn eich peiriant rhag ymosodiadau \n"
-"o'r rhwydwaith."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Mae'r pecyn hwn yn llwytho'r map bysellfwrdd rydych wedi \n"
-"ei ddewis fel yn /etc/sysconfig/keyboard. Mae modd dewis \n"
-"hwn wrth ddefnyddio'r rhaglen wasanaethu kbdconfig. \n"
-"Dylech adael hwn wedi ei alluogi ar gyfer y rhan fwyaf o beiriannau."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Ail-greu awtomatig pennawd y cnewyllyn yn /boot ar\n"
-"gyfer /usr/include/linux{autoconf,version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Canfod a ffurfweddu awtomatig caledwedd wrth gychwyn y cyfrifiadur."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr "Bydd Linuxconf yn trefnu ar adegau i gyflawni amrywiol"
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Mae lpd yn ddaemon argraffu sy'n angenrheidiol i lpr weithio\n"
-"Mae'n weinydd sy'n cyflafareddu gwaith argraffu i\n"
-"argraffydd (ion)."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Mae Gweinydd Rhith Linux yn cael ei ddefnyddio i adeiladu \n"
-"gweinyddion cyflym a chyraeddadwy."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"mae'r enwyd (BIND) yn Wasanaethwr Enw Parth (DNS) sy'n cael ei ddefnyddio i "
-"gydrannu enwau gwestai i'r cyfeiriadau IP."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Yn gosod a dadosod pob System Ffeil y Rhwydwaith (NFS), SMB\n"
-"(Rheolwr Rhwydwaith/Windows), a phwyntiau gosod NCP (NetWare) ."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Cychwyn/Gorffen pob rhyngwyneb rhwydwaith sydd wedi eu \n"
-"ffurfweddu i gychwyn wrth gychwyn y peiriant."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau ar draws "
-"rhwydweithiau TCP/IP.\n"
-"Mae'r gwasanaeth yn darparu  ffwythiannaeth gweinydd NFS, sy;n cael ei "
-"ffurfweddu\n"
-"drwy'r ffeil  /etc/exports."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Mae NFS yn brotocol poblogaidd ar gyfer rhannu ffeiliau \n"
-"ar draws rhwydweithiau TCP/IP. Mae'r gwasanaeth hwn \n"
-"yn darparu'r gallu i gloi ffeiliau NFS."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Cychwyn clo allweddell numlock yn awtomatig yn consol \n"
-"ac Xorg wrth gychwyn y peiriant."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Cynnal OKI 4w ac argraffyddion Windows cyffelyb."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"Mae cynhaliaeth PCMICA fel rheol ar gyfer cynnal pethau fel \n"
-"ethernet a modem mewn gliniadur. Ni fydd yn cychwyn heb ei \n"
-"ffurfweddu i wneud hynny, felly mae'n ddiogel ei gael ar beiriannau \n"
-"sydd ddim ei angen."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mae'r mapiwr porth (portmapper) yn rheoli cysylltiadau RPC, \n"
-"sy'n cael eu defnyddio gan brotocolau fel NFS a NIS. Rhaid i weinydd "
-"porthmap\n"
-"redeg ar beiriannau sy'n gweithredu fel gweinyddion ar gyfer protocolau "
-"sy'n\n"
-"gwneud defnydd o fecanwaith RPC."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Mae Postfix yn Asiant Cludo E-bost (MTA), sef rhaglen sy'n symud e-bost o un "
-"peiriant i'r llall."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Bydd yn cadw ac adfer system pwll entropi ar gyfer cynhyrchu rhif \n"
-"hap o ansawdd uchel."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Dynodi dyfeisiau bras i ddyfeisiau bloc (megis dig caled rhaniadau), \n"
-"ar gyfer defnydd rhaglenni megis Oracle neu chwaraewyr DVD."
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Mae'r daemon llwybrydd yn caniatáu i'r tabl llwybrydd IP awtomatig \n"
-"ddiweddaru drwy gyfrwng y protocol RIP. Tra bo RIP'n cael ei \n"
-"ddefnyddio'n eang ar rwydweithiau bach, mae angen protocolau \n"
-"llwybrydd mwy cymhleth ar gyfer rhwydweithiau cymhleth."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Mae'r protocol rstat yn caniatáu i ddefnyddwyr rhwydwaith \n"
-"i adennill metric perfformaid unrhyw beiriant ar y rhwydwaith."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Mae protocol ruser yn caniatáu i ddefnyddwyr ar rwydwaith i adnabod\n"
-"pwy arall sydd wedi mewngofnodi ar beiriannau eraill sy'n ymateb."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"Mae'r protocol rwho'n caniatáu i ddefnyddwyr pell gael rhestr o'r \n"
-"holl ddefnyddwyr sydd wedi mewngofnodi ar beiriant sy'n rhedeg \n"
-"daemon rwho (yn debyg i fysedd)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Cychwyn y system sain ar eich peiriant"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog yw'r modd mae llawer o daemonau'n defnyddio i gofnodi \n"
-"negeseuon i ffeiliau cofnod systemau. mae'n syniad da io rhedeg \n"
-"syslog  bob tro."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Llwytho'r gyrwyr ar gyfer eich dyfeisiau usb."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "Yn cychwyn Gweinydd Ffont  X (mae hyn yn orfodol i Xorg i redeg).."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Dewiswch ba wasanaethau ddylai gael eu cychwyn yn awtomatig wrth gychwyn y "
-"cyfrifiadur"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Argraffu"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Rhyngrwyd"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Rhannu Ffeiliau"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Gweinyddu Pell"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Gweinydd Cronfa Ddata"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "rhedeg"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "ataliwyd"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Gwasanaethau a daemonau"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr "Dim gwybodaeth ychwanegol am y gwasanaeth hwn."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Gwybodaeth"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "Cychwyn yn ôl y gofyn"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "Cychwyn"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Cychwyn"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Aros"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Beth yw Mandriva Linux?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Croeso i <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-"Mae Mandriva Linux yn <b>ddosbarthiad Linux</b> sy'n cynnwys y system "
-"graidd, sef, <b>system weithredu</b> (yn seiliedig ar gnewyllyn Linux) "
-"ynghyd â <b> llawer o raglenni</b> sy'n darparu ar gyfer pob angen."
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"Mandriva Linux yw'r dosbarthiad Linux mwyaf <b>cyfeillgar</b> heddiw. Mae'n "
-"un o'r dosbarthiadau mwyaf <b>poblogaidd</b> o Linux ar draws y byd i gyd!"
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Cod agored</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Croeso i <b>fyd Cod Agored</b>!"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"Mae Mandriva Linux yn ymroddedig i fodel cod agored. Mae'n golygu fod y "
-"rhyddhad newydd yn ganlyniad <b>cydweithrediad</b> rhwng <b>tîm o "
-"ddatblygwyr Mandriva</b> a <b>chyfranwyr cymuned byd eang</b> cyfranwyr "
-"Mandriva Linux."
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-"Hoffwn <b>ddiolch</b> i bawb sydd wedi cymryd rhan yn natblygiad y fersiwn "
-"diweddaraf."
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>Y drwydded GPL</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-"Mae'r rhan fwyaf o'r feddalwedd sydd wedi ei gynnwys ynghyd â holl offer "
-"Mandriva Linux wedi eu trwyddedu o dan y <b>Drwydded Gyhoeddus Cyffredinol "
-"(GPL)</b>"
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-"Y GPL yw craidd y model cod agored, mae'n caniatáu i bawb y <b>rhyddid</b> i "
-"ddefnyddio, astudio, dosbarthu a gwella meddalwedd mewn unrhyw ffordd, cyn "
-"belled â bod y canlyniad ar gael."
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-"Y brif fantais i hyn yw bod y nifer o ddatblygwyr yn <b>ddiderfyn</b>, yn "
-"golygu meddalwedd o<b>safon uchel iawn</b>."
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>Ymunwch â chymuned</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-"Mae gan Mandriva Linux un o'r <b>cymunedau mwyaf</b> o ddefnyddwyr a "
-"datblygwyr. Mae rôl y gymuned yn eang iawn yn ymestyn o adrodd ar wallau i "
-"ddatblygu rhaglenni newydd. Mae'r gymuned yn chwarae <b>rhan allweddol</b> "
-"ym myd Mandriva Linux."
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-"I <b>ddysgu mwy</b> am ein cymuned egniol, ewch i <b>www.mandrivalinux.com</"
-"b> neu yn uniongyrchol at <b>www.mandrivalinux.com/ên/cookerdevel.php3</b> "
-"os hoffech <b>ymuno</b> â'r datblygiadau."
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr "<b>Fersiwn Llwytho</b>"
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-"Rydych yn gosod <b> Mandriva Linux Llwytho i Lawr</b>. Hwn yw'r fersiwn "
-"rhydd mae Mandriva am ei ddarparu <b>ar gael i bawb</b>."
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-"Nid yw'r fersiwn Llwytho i Lawr <b> yn gallu cynnwys</b> yr holl feddalwedd "
-"nad yw'n god agored. Felly bydd y canlynol ddim yn y fersiwn Llwytho i Lawr:"
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr "\t* <b>Gyrwyr perchnogol</b> (megis gyrwyr NVIDIA®, ATI™, ac ati.)."
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-"\t* <b>Meddalwedd perchnogol</b> (megis Acrobat® Reader®, RealPlayer®, "
-"Flash™, ac ati.)."
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-"Ni fydd gennych fynediad i'r <b>gwasanaethau ynglwm</b> yn y cynnyrch "
-"Mandriva eraill ychwaith."
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr "<b>Discovery, Eich Bwrdd Gwaith Linux Cyntaf</b>"
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr "Rydych yn gosod <b>Mandriva Linux Discovery</b>"
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery yw'r fersiwn <b>hawsaf</b> a mwyaf <b>cyfeillgar</b> i'r "
-"defnyddiwr. Mae'n cynnwys y <b>meddalwedd orau</b> sydd wedi ei ddewis yn "
-"ofalus ar gyfer defnydd swyddfa, aml-gyfrwng a gweithgaredd rhyngrwyd. Mae "
-"ei ddewislenni yn cylchdroi o amgylch tasgau gydag un rhaglen i bob tasg."
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr "<b>PowerPack, Y Bwrdd Gwaith Linux Gorau</b>"
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr "Rydych yn gosod <b>Mandriva Linux PowerPack</b>"
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-"PowerPack yw <b>prif gynnyrch bwrdd gwaith Linux</b> Mandriva. Mae PowerPack "
-"yn cynnwys <b>miloedd o raglenni</b> - popeth o'r mwyaf poblogaidd i'r mwyaf "
-"technegol."
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr "<b>PowerPack+, Ateb Linux ar gyfer Byrddau gwaith a Gweinyddion</b>"
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr "Rydych yn gosod <b>Mandriva Linux PowerPack+</b>."
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-"PowerPack+ <b>yr ateb Linux llawn</b> ar gyfer <b>rhwydweithiau</b> bach a "
-"chanolig. Mae PowerPack+ yn cynnwys miloedd o <b>raglenni bwrdd gwaith</b> a "
-"dewis cynhwysfawr o'r <b>raglenni gweinydd</b> mwyaf blaengar."
-
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Cynnyrch Mandriva</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-"Mae <b>Mandriva</b> wedi datblygu ystod eang o gynnyrch <b>Mandriva Linux</"
-"b>."
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Cynnyrch Mandriva Linux yw:"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr "\t* <b>Discovery</b>, Eich Bwrdd Gwaith Linux Cyntaf."
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr "\t* <b>PowerPack</b>, Y Bwrdd Gwaith Linux Gorau."
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-"\t* <b>PowerPack+</b>, Ateb Linux ar gyfer Byrddau Gwaith a Gweinyddion."
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-"\t* <b>Mandriva Linux ar gyfer x86-64</b>, Ateb Mandriva Linux i wneud y "
-"gorau o'ch prosesydd 64-did."
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr "<b>Cynnyrch Mandriva (Cynnyrch Nomad)</b>"
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-"Mae Mandriva Linux wedi datblygu dau gynnyrch sy'n caniatáu i chi ddefnyddio "
-"Mandriva Linux <b>ar unrhyw gyfrifiadur</b> heb fod angen ei osod:"
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-"\t* <b>Move</b>, dosbarthiad Mandriva Linux sy'n rhedeg yn llwyr o CD-ROM "
-"byw."
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-"\t* <b>GlobeTrotter</b>, dosbarthiad Mandriva Linux sydd wedi ei osod yn "
-"barod ar “LaCie Mobile Hard Drive” bychan iawn"
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "<b>Cynnyrch Mandriva (Atebion Proffesiynol)</b>"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-"Isod mae cynnyrch Mandriva sydd wedi eu cynllunio i ateb <b>anghenion "
-"proffesiynol</b>:"
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-"\t* <b>Y Bwrdd Gwaith Corfforaethol</b>, Bwrdd Gwaith Mandriva Linux ar "
-"gyfer Busnesau."
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr "\t* <b>Y Gweinydd Corfforaethol</b>, Ateb Gweinydd Mandriva Linux."
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr "\t* <b>Mur Cadarn Aml-Rhwydwaith</b>, Ateb Diogelwch Mandriva Linux."
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>Dewis KDE,</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-"Gyda'ch pecyn Discovery, byddwch yn cael eich cyflwyno i <b>KDE</b>, yr "
-"<b>amgylchedd bwrdd gwaith graffigol</b> mwyaf blaengar a chyfeillgar, sydd "
-"ar gael."
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-"Bydd KDE yn gwneud eich <b>camau cyntaf</b> gyda Linux mor  <b>hawdd</b> "
-"byddwch wrth eich bodd!"
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-"Mae KDE hefyd yn cynnwys llawer o <b>raglenni wedi eu hintegreiddio’n dda</"
-"b> megis Konqueror, y porwr gwe a Kontact, y rheolwr gwybodaeth bersonol."
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Dewiswch eich Hoff Amgylchedd Bwrdd Gwaith</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"Gyda PowerPack, bydd gennych y dewis o <b>amgylchedd bwrdd gwaith graffigol</"
-"b>. Mae Mandriva wedi dewis <b>KDE</b> fel yr un rhagosodedig."
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-"KDE yw un o'r amgylcheddau bwrdd gwaith graffigol <b>mwyaf blaengar</b> a "
-"<b>chyfeillgar</b> sydd ar gael. Mae'n cynnwys llawer o raglenni integredig."
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-"Ond cewch arbrofi gyda'r cyfan (gan gynnwys <b> GNOME</b>, <b>IceWM</b>, ac "
-"ati) a dewis eich ffefryn."
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"Gyda PowerPack+, mae gennych y dewis o <b>amgylcheddau bwrdd gwaith "
-"graffigol</b>. Mae Mandriva wedi dewis <b>KDE</b> fel y rhagosodedig."
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "<b>OpenOffice.org</b>"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr "With Discovery, you will discover <b>OpenOffice.org</b>."
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-"Mae OpenOffice.org yn gallu darllen ac ysgrifennu'r mathau mwyaf cyffredin o "
-"ddogfennau <b>Microsoft® Office</b> megis Word, Excel a PowerPoint®."
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-"Mae Discovery yn cynnwys <b>Kontact</b>, <b>ateb grwpwar</b> newydd KDE."
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"Yn fwy na <b>rhaglen e-bost</b> llawn, mae Kontact hefyd yn cynnwys <b>llyfr "
-"cyfeiriadau</b>, a <b>chalendr</b>, yn ogystal ag offeryn i gymryd "
-"<b>nodiadau</b>!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-"Dyma'r ffordd hawsaf i gyfathrebu gyda'ch cysylltiadau a threfnu eich amser."
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Crwydro'r Rhyngrwyd</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr "Bydd Discovery yn rhoi mynediad i <b>bob adnodd ar y We</b>:"
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* Pori'r <b>We</b> gyda Konqueror."
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr "\t* <b>Sgwrsio</b> ar-lein gyda'ch ffrindiau drwy Kopete."
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "\t* <b>Trosglwyddo</b> ffeiliau gyda KBear."
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr "<b>Mwynhewch y Nodweddion Amlgyfrwng</b>"
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr "Bydd Discovery yn gwneud <b>aml-gyfrwng</b> yn hawdd iawn i chi:"
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr "\t* Gwylio eich hoff <b>fideos</b> gyda Kaffeine."
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr "\t* Gwrando ar eich <b>ffeiliau cerddoriaeth</b> gydag amaroK."
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* Golygu a chreu <b>delweddau</b> gyda GIMP."
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr "<b>Mwynhau'r Ystod Eang o Raglenni</b>"
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"Yn newislen Mandriva Linux byddwch yn canfod rhaglenni <b>hawdd eu "
-"defnyddio</b> ar gyfer <b>eich holl waith</b>:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-"\t* Creu, golygu a rhannu dogfennau swyddfa gydag <b>OpenOffice.org</b>"
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* Rheoli eich gwybodaeth bersonol gyda rhaglenni gwybodaeth bersonol "
-"integredig (PIM) <b>Kontact</b> ac <b>Evolution</b>."
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr "\t* Pori'r We gyda <b>Gwe-lywiwr Mozilla</b> a <b>Konqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* Cymryd rhan mewn sgyrsiau ar-lein gyda <b>Kopete</b>"
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* Gwrando ar eich <b>CDiau sain</b> a <b>ffeiliau cerddoriaeth</b>, gwylio "
-"eich  <b>fideos</b>."
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* Golygu delweddau a ffotograffau gyda <b>The Gimp</b>"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Amgylcheddau datblygu</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-"Mae PowerPack yn rhoi'r offer gorau i chi i <b>ddatblygu</b> eich rhaglenni "
-"eich hun."
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-"Byddwch yn gallu mwynhau'r amgylchedd datblygu integredig pwerus gan KDE, "
-"<b>KDevelop</b>, sy'n caniatáu i chi raglenni mewn nifer o ieithoedd."
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-"Mae PowerPack hefyd yn cynnwys <b>GCC</b>, y crynhöwr Linux blaenaf a "
-"<b>GDB</b>, y dadfygiwr cysylltiedig."
-
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>Golygyddion Datblygu</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-"Mae PowerPack yn caniatáu i chi ddewis rhwng y <b>golygyddion poblogaidd</b> "
-"hyn:"
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: golygydd arddangos byw hawdd ei addasu"
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-"\t* <b>Xemacs</b>: golygydd cod agored arall a system datblygu meddalwedd"
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr "Vim: golygydd testun uwch gyda mwy o nodweddion na'r Vi safonol"
-
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>Ieithoedd Datblygu</b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-"Gyda'r holl <b>offer pwerus</b>hyn, bydd modd i chi ysgrifennu rhaglenni "
-"mewn <b>dwsinau o ieithoedd rhaglenni</b>:"
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr "\t* Yr enwog <b>iaith C</b>."
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr "\t* Ieithoedd cyfeirio gwrthrych:"
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr "\t* Ieithoedd sgriptio"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr "\t* Ac eraill."
-
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>Offer Datblygu</b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-"Gydag amgylchedd datblygu integredig pwerus <b>KDevelop</b> â'r crynhöwr "
-"Linux blaenaf <b>GCC</b>, bydd modd i chi greu rhaglenni mewn <b>nifer o "
-"ieithoedd gwahanol </b> (C, C++, Java™, Perl, Python, ac ati)."
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Gweinydd Grwpwar</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-"Mae PowerPack+ yn rhoi mynediad i <b>Kolab</b>, <b>gweinydd grwpwar</b> "
-"llawn, fydd, diolch i'r cleient <b>Kontact</b>, yn caniatáu i chi i:"
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* Anfon a derbyn eich <b>e-byst</b>."
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr "\t* Rannu eich <b>agendas</b> â'ch <b>llyfrau cyfeiriadau</b>."
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr "\t* Rheoli eich <b>memos</b> a'ch <b>rhestrau tasgau</b>."
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Gweinyddion</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-"Cryfhewch eich rhwydwaith fusnes gyda <b>darpariaethau o'r radd flaenaf</b>, "
-"gan gynnwys:"
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-"\t* <b>Samba</b>: Gwasanaethau ffeil ac argraffu ar gyfer cleientiaid MS-"
-"Windows"
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: Y gweinydd Gwe mwyaf poblogaidd"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-"\t* <b>MySQL</b> a <b>PostgreSQL</b>: Y cronfeydd data cod agored mwyaf "
-"poblogaidd"
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: Concurrent Versions System, y system rheoli fersiwn cod "
-"agored amlycaf"
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr "\t* <b>ProFTPD</b>: meddalwedd ffurfweddadwy gweinydd FTP GPL"
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-"\t* <b>Postfix</b> a <b>Sendmail</b>: Gweinyddion e-bost pwerus a "
-"phoblogaidd."
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Canolfan Rheoli Mandriva Linux</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"Mae <b>Canolfan Reoli Mandriva Linux</b> yn gasgliad hanfodol o wasanaethau "
-"ar gyfer Mandriva Linux swydd wedi eu cynllunio i symlhau ffurfweddiad eich "
-"cyfrifiadur."
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-"Byddwch yn gwerthfawrogi'n syth y casgliad o <b>fwy na 60</b> o wasanaethau "
-"hwylus ar gyfer <b>ffurfweddu'ch system yn hawdd</b>: dyfeisiau caledwedd, "
-"pwyntiau gosod, rhwydwaith a Rhyngrwyd, lefel diogelwch eich cyfrifiadur, ac "
-"ati."
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>Y Model Cod Agored</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-"Fel pob rhaglenni cyfrifiadurol, mae meddalwedd cod agored <b>yn golygu "
-"amser a phobl</b> ar gyfer datblygiad. Er mwyn parchu athroniaeth cod "
-"agored, mae Mandriva yn gwerthu cynnyrch gwerth ychwanegol a gwasanaethau i "
-"<b>barhau i wella Mandriva Linux</b>. Os hoffech chi <b>gefnogi athroniaeth "
-"cod agored</b> a datblygiad Mandriva Linux, <b>os gwelwch chi'n dda</b> "
-"ystyriwch brynu ein cynnyrch neu ein gwasanaethau!"
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>Siop Ar-lein</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"I ddysgu rhagor am gynnyrch a gwasanaethau Mandriva, ewch i'n <b>platfform e-"
-"fasnachu</b>."
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-"Yno cewch ganfod ein holl gynnyrch, gwasanaethau a chynnyrch trydydd parti."
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-"Mae'r platfform newydd gael ei <b>ail gynllunio</b> i wella ei "
-"effeithlonrwydd a'i ddefnyddioldeb."
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "Ewch i <b> store.mandriva.com</b> heddiw."
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-"<b>Mandriva Club</b> yw'r <b>cydymaith perffaith</b> ar gyfer eich cynnyrch "
-"Mandriva Linux..."
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-"Cewch fanteisio ar <b>freintiau gwerthfawr</b> drwy ymuno â Mandriva Club, e."
-"e:"
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-"\t* <b>Gostyngiadau arbennig</b> ar gyfer cynnyrch a gwasanaethau yn ein "
-"siop ar-lein <b>store.mandriva.com</b>."
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-"\t* Mynediad i <b>raglenni masnachol</b> (e.e. gyrwyr NVIDIA® or ATI™)."
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* Cymryd rhan mewn <b>fforymau defnyddwyr</b> Mandriva Linux."
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-"\t* <b>Mynediad cynnar a breintiol</b>, cyn eu rhyddhau'n gyhoeddus, i "
-"<b>ddelweddau ISO</b> Mandriva Linux."
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-"<b>Mandriva Online</b> yw'r gwasanaeth newydd gwerthfawr mae Mandriva yn ei "
-"gynnig i 'w gwsmeriaid!"
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-"Mae Mandriva Online yn darparu ystod eang o wasanaethau gwerthfawr ar gyfer "
-"<b>diweddaru'n hawdd</b> eich systemau your Mandriva Linux:"
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-"\t* Diogelwch systemau <b>perffaith</b> (diweddaru meddalwedd yn "
-"awtomataidd)."
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-"\t* <b>Hysbysu</b> am ddiweddariadau (drwy e-bost neu raglennig ar y bwrdd "
-"gwaith)."
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr "\t* Hyblyg <b>amserlen</b> diweddariadau."
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-"\t* Rheolaeth o'ch <b>holl systemau Mandriva Linux</b> gydag un cyfrif."
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-"Ydych chi angen <b>cymorth?</b> Mae arbenigwyr technegol Mandriva i'w cael "
-"ar  <b>ein platfform cefnogaeth dechnegol </b> www.mandrivaexpert.com."
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-"Drwy gymorth <b>arbenigwyr cymwysedig Mandriva Linux</b>, byddwch yn abed "
-"llawer o amser."
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-"Am unrhyw gwestiwn am Mandriva Linux, mae gennych y gallu i brynu cefnogaeth "
-"ar gyfer unrhyw ddigwyddiad o <b>store.mandriva.com</b>."
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Gweithfan Swyddfa"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Rhaglenni swyddfa: prosesydd geiriau (OpenOffice.org Writer, Kword), "
-"taenlenni (OpenOffice.org Calc, Kspread), ddarllenydd pdf, ag ati"
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Rhaglenni swyddfa: prosesydd geiriau (Kword, abiword), taenlenni (kspread, "
-"gnumeric), ddarllenydd pdf, ag ati"
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Man chwarae"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Rhaglenni difyrrwch: arcêd, gemau bwrdd, strategaeth, ag ati"
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Man aml-gyfrwng"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Chwarae sain a fideo/rhaglenni golygu"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Man Rhyngrwyd"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Casgliad o offer i ddarllen ac anfon e-bost a newyddion (mutt, tin..) ac i "
-"bori'r We"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Cyfrifiadur Rhwydwaith (cleient)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Cleientiaid ar gyfer protocolau amrywiol yn cynnwys ssh"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Ffurfweddiad"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Offer i wneud ffurfweddu'ch cyfrifiadur yn haws"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Offer y Consol"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Golygyddion, cregyn, offer ffeilio, terfynellau"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Llyfrgelloedd datblygiadol C a C++, rhaglenni a ffeiliau cynnwys"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Dogfennaeth"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Llyfrau a Howto's ar Linux a Meddalwedd Rhydd"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Linux Standard Base. Cefnogaeth i raglenni trydydd parti"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "Grwpwar"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Gweinydd Kolab"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Mur Gwarchod/Llwybrydd"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Porth i'r rhyngrwyd"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "E-bost/Newyddion"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Gweinydd e-bost Postfix, gweinydd newyddion Inn"
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "Cyfeiriadur Gweinydd"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "Gweinydd FTP"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Gweinydd Enw Parth a Gwybodaeth Rhwydwaith"
-
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Gweinydd Ffeil a Rhannu Argraffydd"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "Gweinydd NSF, gweinydd Samba"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Cronfa Ddata"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "Gweinydd cronfa data PostgreSQL neu MySQL"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Gwe/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "E-bost"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Gweinydd e-bost Postfix"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "Gweinydd cronfa data PostgreSQL neu MySQL"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Gweinydd Cyfrifiadur Rhwydwaith"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "Gweinydd NFS, gweinydd SMB, gweinydd dirprwyol, gweinydd ssh"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "Man Gwaith KDE"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"KDE - Amgylchedd Bwrdd gwaith K, yr amgylchedd graffig sylfaenol gyda "
-"chasgliad o offer"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Man Gwaith Gnome"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Amgylchedd graffig gyda chasgliad o raglenni ac offer bwrdd gwaith hawdd eu "
-"defnyddio."
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Byrddau Gwaith Graffigol Eraill"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ag ati"
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Gwasanaethau"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "Gweinydd SSH"
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "Webmin"
-
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Gweinydd Ffurfweddiad Pell Webmin"
-
-#: share/compssUsers.pl:191
-#, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Gwasanaethau Rhwydwaith/Monitro"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr "Offer monitro, cyfrifo prosesau, tcpdunp, nmap..."
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "Dewiniaid Mandriva"
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "dewiniaid i ffurfweddu gweinydd"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"Mae'r rhaglen hon yn feddalwedd rhydd; gallwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn ôl eich dewis) unrhyw fersiwn diweddarach.\n"
-"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
-"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software  Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - galluogi i ffurfweddu'r cychwynnwr\n"
-"  --splash          - galluogi i ffurfweddu thema cychwyn\n"
-"Modd rhag.:cynnig ffurfweddu nodwedd awto fewngofnodi"
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[DEWISIADAU] [PROGRAM_NAME]\n"
-"\n"
-"DEWISIADAU:\n"
-"  --help            - argraffu'r neges cymorth.\n"
-"  --report          - dylai'r rhaglen fod yn un o offer Mandriva Linux\n"
-"  --incident        - ylai'r rhaglen fod yn un o offer Mandriva Linux"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-"[--add]\n"
-"  --add             - Dewin \"ychwanegu rhyngwyneb rhwydwaith\" \n"
-"  --del             - Dewin \"dileu rhyngwyneb rhwydwaith\" \n"
-"  --skip-wizard     - rheoli cysylltiadau\n"
-"  --internet        - ffurfweddu'r rhyngrwyd\n"
-"  --wizard          - fel --add"
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"Rhaglen mewnforio a monitro ffontiau\n"
-"\n"
-"DEWISIADAU:\n"
-"--windows_import : mewnforio o bob rhaniad Windows.\n"
-"--xls_fonts      : dangos pob ffont sy'n bodoli o xls\n"
-"--install        : derbyn unrhyw ffeil ffont ac unrhyw gyfeiriadur.\n"
-"--uninstall      : dadosod unrhyw ffont neu gyfeiriadur ffont.\n"
-"--replace        : amnewid pob ffont os yw'n bod\n"
-"--application    : 0 dim rhaglen.\n"
-"                 : 1 pob rhaglen ar gael yn cael ei gynnal.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"Ffurfweddwr Gweinydd Terfynell Mandriva Linux\n"
-"--enable         : galluogi MTS\n"
-"--disable        : analluogi MTS\n"
-"--start          : cychwyn MTS\n"
-"--stop           : atal MTS\n"
-"--adduser        : ychwanegu defnyddiwr system bresennol i MTS (angen enw "
-"defnyddiwr)\n"
-"--deluser        : dileu defnyddiwr system bresennol o MTS (angen enw "
-"defnyddiwr)\n"
-"--addclient      : ychwanegu peiriant cleient i MTS (angen cyfeiriad MAC, "
-"IP, enw delwedd nbi)\n"
-"--delclient      : dileu  peiriant cleient i MTS (angen cyfeiriad MAC, IP, "
-"enw delwedd nbi)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[bysellfwrdd]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Rhaglen Cyswllt a Monitro'r Rhwydwaith a'r Rhyngrwyd\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[DEWIS]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       cydraniad  XFdrake"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Defnydd: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Rhaid ailgychwyn i'r newidiadau ddod i rym"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Allgofnodwch ac yna defnyddiwch Ctrl Alt-BackSpace"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr "Rhaid allgofnodi ac i mewn eto i newidiadau ddigwydd."
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "Diwerth heb Wasanaethwr Terfynell"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: mae %s angen enw gwesteiwr...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: mae %s angen enw gwesteiwr, cyfeiriad MAC, IP, nbi-image, 0/1 ar gyfer "
-"THIN_CLIENT, 0/1 ar gyfer Ffurfweddiad Lleol...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: mae %s angen enw gwesteiwr...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Enwch Wasanaethwr Ffurfweddiad"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Galluogi'r Gweinydd"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Analluogi'r Gweinydd"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Cychwyn y Gweinydd"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Atal y Gweinydd"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Delweddau Cychwyn y Rhwyd"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Ychwanegu/Diddymu Defnyddwyr"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Ychwanegu/Dileu Cleientiaid"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Delweddau"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr "Cleientiaid/Defnyddwyr"
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "Dewin Tro Cyntaf"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr "Diffinio %s fel dm, ychwanegu defnyddiwr gdm i /etc/passwd$$CLIENT$$"
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-"\n"
-" Bydd y Dewin yn:\n"
-" \t1) Gofyn i chi ddewis un ai cleient 'tenau' neu 'tew'.\n"
-"\t2) Gosod DHCP.\n"
-"\t\n"
-"Wedi gwneud hyn, bydd y Dewin yn:\n"
-"\t\n"
-"    a) Make pob "
-"nbis.                                                                \n"
-"    b) Gweithredu'r "
-"gweinydd.                                               \n"
-"    c) Cychwyn y gwasanaethwr.                                           \n"
-"    d) Cydweddu'r ffeiliau cysgod fel bo'r holl ddefnyddwyr, gan gynnwys "
-"root, \n"
-"       yn cael eu hychwanegu at y ffeil cysgod$$CLIENT$$ "
-"file.                                              \n"
-"    e) Gofyn i chi wneud disg meddal cychwyn.\n"
-"    f) Os yw'n gleient tenau KDM.\n"
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Diddymu'r Dewin"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr "Cadwch ffurfweddiad dhcpd!"
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr "Defnyddiwch gleientiaid tenau"
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr "Cydweddu gosodiadau bysellfwrdd clientX gyda gweinydd"
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"Dewis y math o gleient rhagosodedig.\n"
-"    Cleient 'Tenau' sy'n rhedeg popeth oddi ar CPU/RAM gweinydd, gyda "
-"dangosydd cleient.\n"
-"    Cleient 'Tew' sy'n defnyddio eu CPU/RAM eu hun ond system ffeiliau'r "
-"gweinydd."
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "Creu delwedd cychwyn rhyngrwyd ar gyfer pob cnewyllyn"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Bydd hyn yn cymryd rhai munudau"
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Gorffen!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-"Cydweddu rhestr defnyddwyr y gweinydd gyda'r rhestr cleient, gan gynnwys "
-"gwraidd."
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-"Er mwyn galluogi newidiadau i'r cleient tenau, rhaid i'r rheolwr arddangos "
-"gael ei gychwyn. Cychwyn?"
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr "Trosolwg Gweinydd Terfynell"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - Creu Delwedd Cychwynnwr Galluogi Etherboot:\n"
-"        \t\tI gychwyn y cnewyllyn drwy etherboot, rhaid creu delwedd "
-"cnewyllyn/initrd\n"
-"        \tarbennig. Mae tmkinitrd-net yn gwneud llawer o'r gwaith ac mae "
-"drak TermServ yn                             \trhyngwyneb graffigol iddo i "
-"gynorthwyo rheoli/addasu'r delweddau. I greu'r ffeil\n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.dylech greu'r ddelwedd etherboot "
-"ar gyfer o leiaf un                  \tcnewyllyn llawn."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"        - Cynnal /etc/dhcpd.conf:\n"
-"        \t\tIgychwyn cleient o'r rhyngrwyd mae pob cleient angen cofnod "
-"dhcpd.conf ei hun,        \t\tI ddynodi cyfeiriad IP a delwedd cychwyn "
-"rhyngrwyd i'r peiriant. Mae drakTermServ\n"
-"        \t\tyn gallu gosod/tynnu rhain\n"
-"\t\t\t\n"
-"        \t\t(Gall cardiau PCI hepgor y ddelwedd - bydd etherboot yn gofyn am "
-"y ddelwedd gywir. Dylech\n"
-"        \t\thefyd ystyried pan fo etherboot yn chwilio am y ddelwedd, bydd "
-"yn disgwyl enwau fel\n"
-"        \t\tboot-3c59x.nbi, yn lle boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tMae stanza dhcpd.conf arferol i gynnal cleient di-ddisg yn "
-"edrych fel:"
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"\t\t\tEr bod modd defnyddio casgliad o gyfeiriadau IP, yn lle gosod cofnod "
-"penodol ar\n"
-"\t\t\t beiriant cleient, mae defnyddio cynllun cyfeiriad sefydlog yn "
-"caniatáu defnyddio\n"
-"\t\t\tnodweddion ffeiliau ffurfweddu cleient penodol mae ClusterNFS yn "
-"darparu.\n"
-"\t\t\t\n"
-"\t\t\tSylwer: Mae'r cofnod \"#type\" yn cael ei ddefnyddio gan drakTermServ "
-"yn unig.  Clients can either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - Cynnal %s:\n"
-"        \t\tAr gyfer defnyddwyr sy'n gallu mewngofnodi i system o gleient di "
-"ddisg, rhaid dyblygu eu cofnod \n"
-"        \t\t/etc/shadow yn %s. drakTermServ helps\n"
-"        \t\tyn yr achos hwn drwy ychwanegu neu dynnu defnyddwyr o'r ffeil."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - Cleient Unigol %s:\n"
-"        \t\tDrwy clusternfs, mae modd i bob cleient gael ei ffeiliau "
-"ffurfweddiad ei hun\n"
-"        \t\tar system ffeiliau gwraidd y gweinydd. Drwy ganiatáu "
-"ffurfweddiad caledwedd cleient,\n"
-"        \t\tbydd drakTermServ yn cynorthwyo i greu'r ffeiliau hyn."
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - Ffeiliau ffurfweddi system cleient unigol:\n"
-"        \t\tDrwy clusternfs, mae modd i bob cleient di-ddisg gael ei "
-"ffeiliau ffurfweddu ei hun\n"
-"        \t\tar system ffeiliau gwraidd y gweinydd. Drwy ganiatáu "
-"ffurfweddiad caledwedd  \n"
-"       \tcleient lleol, mae modd addasu ffeiliau fel /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t\t/etc/sysconfig/keyboard ar sail cleient.\n"
-"\n"
-"        Sylw: Mae galluogi ffurfweddiad cleient lleol yn galluogi "
-"mewngofnodi gwraidd i'r gweinydd\n"
-"        terfynell ar bob un o'ch peiriannau cleient sydd a'r nodwedd hon "
-"wedi ei alluogi. Mae modd diffodd\n"
-"        ffurfweddiad lleol, cadw'r ffeiliau ffurfweddu, un waith mae'r "
-"peiriant cleient wedi ei ffurfweddu"
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tBydd drakTermServ yn ffurfweddu'r ffeil i weithio ar y cyd gyda "
-"delweddau a grëwyd gan\n"
-"        \t\tmkinitrd-net, a'r cofnodion yn /etc/dhcpd.conf, i wasanaethu'r "
-"ddelwedd cychwyn i bob\n"
-"        \t\tcleient di-ddisg.\n"
-"\n"
-"        \t\tMae ffeil ffurfweddu TFTP nodweddiadol yn edrych fel hyn:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \t\tMae'r newidiadau yma o'r gosodiad rhagosodedig yn newid y faner "
-"analluogi i \n"
-"        \t\t'na' a newid llwybr cyfeiriadur i /var/lib/tftpboot, lle mae "
-"mkinitrd-net\n"
-"        \t\tyn gosod ei ddelweddau."
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Disg Meddal Cychwyn"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "Cychwyn yr ISO"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "Delwedd PXE"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "Fersiwn rhagosodedig y cnewyllyn"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr "Creu delwedd PXE"
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Adeiladu'r cnewyllyn cyfan -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Heb ddewis cnewyllyn"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Adeiladau NIC unigol -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "Heb ddewis NIC!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Adeiladu pob cnewyllyn -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Dileu"
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "Delwedd heb ei ddewis!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Dileu Pob NBI"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"Mae !!! yn dangos bod y cyfrinair yng nghronfa ddata'r system yn\n"
-"wahanol i'r un yng nghronfa ddata'r Gweinydd Terfynell.\n"
-"I fewngofnodi i'r Gweinydd Terfynell i ddileu/ail ychwanegu’r defnyddiwr."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Pob Defnyddiwr -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Dileu Defnyddiwr"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "math:  %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "Ffurfweddiad lleol: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Caniatáu ffurfweddiad\n"
-"caledwedd lleol"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "Heb greu delweddau cychwyn y rhwyd!"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Cleient Tenau"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Caniatáu Cleientiaid Tenau"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-"Cydweddu gosodiadau\n"
-" bysellfwrdd clientX gyda gweinydd"
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Ychwanegu Cleient -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "math:  fat"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "math:  tenau"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "ffurfweddiad lleol: false"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "ffurfweddiad lleol: true"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Golygu Cleient"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Analluogi Ffurfweddiad Lleol"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Diddymu Cleient"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Ffurfweddu dhcpd..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Mae angen cychwyn y Rheolwr Dangosydd i'r newid ddigwydd.\n"
-"(ailgychwyn gwasanaeth dm - yn y consol)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-"Nid yw'r cleientiaid tennau'n gweithio gydag awto fewngofnodi. Anablu awto "
-"fewngofnodi?"
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "Bydd pob cleient yn defnyddio %s"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Isnet:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Llwybryddion:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Masg Isnet"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Cyfeiriad Darlledu:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Enw Parth:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "Enwi Gweinydd:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Cychwyn Amrediad IP:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "Diwedd Amrediad IP:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr "Atodi TS yn Gynwysiedig i'r Ffurfwediad Presennol"
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Ysgrifennu ffurfweddu"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Ffurfweddiad Gweinydd dhcpd"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Tynnwyd y rhan fwyaf o'r gwerthoedd\n"
-"hyn o'ch system ar waith.\n"
-"Gallwch eu newid yn ôl y galw."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Mewnosodwch ddisg meddal:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Methu cael mynediad i'r disg meddal!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Mae modd tynnu'r disg meddal nawr"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Does dim gyrrwr disg meddal ar gael!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "Delwedd PXE yw %s/%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "Gwall ysgrifennu %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "%s yw'r ddelwedd ISO etherboot"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Aeth rhywbeth o'i le! - ydy mkisofs wedi ei osod?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Mae angen creu /etc/dhcpd.conf yn gyntaf"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr "%s passwd gwael yng Ngweinydd Terfynell - ail ysgrifennu...\n"
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "Nid yw %s yn ddefnyddiwr..\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "Mae %s yn ddefnyddiwr Gweinydd Terfynell eisoes\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "Methodd ychwanegu %s 'r Gweinydd Terfynell\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "Ychwanegu %s i'r Gweinydd Terfynell\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "Dilëwyd %s...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "Heb ganfod %s...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-"Mae /etc/hosts.allow and /etc/hosts.deny wedi eu ffurfweddu - dim newid"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Newidiodd ffurfweddiad - ailgychwyn clusternfs/dhcpd?"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Gwall!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Methu canfod ffeil delwedd angenrheidiol '%s'."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Ffurfweddwr Awto-Osod"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"Rydych ar fin ffurfweddu disg meddal Gosod Awtomatig. Mae'r nodwedd hon "
-"braidd yn beryglus a dylid ei ddefnyddio gyda gofal.\n"
-"\n"
-"Gyda'r nodwedd hon, bydd modd ailchwarae’r gosodiad ar y cyfrifiadur, gan "
-"eich holi'n rhyngweithiol ar gyfer rhai camau, er mwyn newid eu gwerthoedd.\n"
-"\n"
-"\n"
-"I fod yn gwbl ddiogel ni fydd y rhannu a'r fformatio'n cael ei wneud yn "
-"awtomatig, beth bynnag wnewch chi wrth osod y cyfrifiadur.\n"
-"\n"
-"Cliciwch iawn i barhau?"
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "ail chwarae"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "llaw"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Ffurfweddiad Camau Awtomatig"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Dewiswch ar gyfer pob cam a fydd yn ail chwarae fel eich gosodiad, neu a "
-"fydd gyda llaw"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Creu disg meddal awto gosod"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Rhowch ddisg meddal  yng ngyrrwr %s (ar gyfer disg gyrwyr)"
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Creu disg meddal awto gosod (disg gyrwyr)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Croeso\n"
-"\n"
-"Mae paramedrau'r awto osod i'w cael yn yr adran ar y chwith"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Llongyfarchiadau!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Mae'r disg meddal wedi ei gynhyrchu'n llwyddiannus. \n"
-"Gallwch ail chwarae eich gosodiad."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Awto Gosod"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Ychwanegu eitem"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Tynnu'r eitem olaf"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"Mae Expect yn estyniad o'r iaith sgriptio TCL sy'n caniatáu sesiynau "
-"rhyngweithiol heb ymyrraeth y defnyddiwr."
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "Cadw'r gyfrinach ar gyfer y system yn ffurfweddiad drakbackup."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"Ar gyfer CD aml sesiwn, dim ond y sesiwn gyntaf fydd yn dileu'r cdrw. Fel "
-"arall bydd y cdrw yn cael ei ddileu cyn bob cadw."
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"Bydd y dewis hwn yn cadw ffeiliau sydd wedi newid. Bydd ei union ymddygiad "
-"yn dibynnu ar ba un a'i modd cynyddol neu ddifferol sy'n cael eu defnyddio."
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"Dim ond ffeiliau sydd wedi newid neu sy'n newydd fydd cadw wrth gefn "
-"cynyddol yn eu cadw."
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Mae cadw wrth gefn differol yn cadw dim ond y ffeiliau sydd wedi newid neu "
-"sy'n newydd ers y fersiwn gwreiddiol 'sylfaenol'."
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"Dylai hyn fod yn ddefnyddiwr lleol neu gyfeirydd e-bost rydych am i "
-"ganlyniad y copi wrth gefn ei anfon ato. Rhaid diffinio gweinydd e-bost "
-"gweithredol."
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"Ni fydd ffeiliau neu gardiau gwyllt wedi eu rhestri yn ffeil .backupignore "
-"ar frig y goeden cyfeiriadur yn cael eu cadw."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"Ar gyfer cadw wrth gefn cyfryngau eraill, mae ffeiliau'n dal yn cael eu creu "
-"ar y disg caled, ac yna eu symud i gyfrwng arall. Bydd galluogi hyn yn "
-"tynnu'r ffeiliau tar oddi ar y disg caled ar ôl creu'r copi wrth gefn."
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"Mae modd ffurfweddu rhai protocolau, megis srync ar ochr y gweinydd. Yn lle "
-"defnyddio llwybr cyfeiriadur, byddwch yn defnyddio enw 'modiwl' ar gyfer y "
-"llwybr gwasanaeth."
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"Mae Addasu'n caniatáu i chi enw eich dyddiad ac amser. Mae'r dewisiadau "
-"eraill yn defnyddio rhannau rhedeg yn /etc/crontab."
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr "Dim cyfrwng wedi ei ddewis ar gyfer gweithredu cron."
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr "Dim cyfnod wedi ei ddewis ar gyfer gweithredu cron."
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Nid yw interval cron ar gael ar gyfer di-wraidd"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr "Nid yw \"%s\" yn e-bost dilys nac yn ddefnyddiwr lleol presennol!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"Mae \"%s\" yn ddefnyddiwr lleol, ond nid ydych wedi dewis SMTP lleol, felly "
-"mae'n rhaid i chi ddefnyddio cyfeiriad e-bost cyfan!"
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr "Rhestr defnyddwyr dilys wedi newid, ailysgrifennu ffeil ffurfweddu."
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "Rhestr hen ddefnyddiwr:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "Rhestr defnyddiwr newydd:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      Adroddiad DrakBackup  \n"
-"\n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                     Adroddiad Daemon DrakBackup \n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                   Manylion Adroddiad DrakBackup \n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Cyfanswm cynnydd"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"Mae %s yn bodoli, dileu?\n"
-"\n"
-"Rhybudd: Os ydych eisoes wedi dilyn y broses hon, bydd\n"
-" angen tynnu'r cofnod o authorized_keys ar y gweinydd."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Bydd hyn yn cymryd amser i gynhyrchu'r allweddi"
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "Methu agor %s"
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Dim cais am gyfrinair ar %s ym mhorth %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Cyfrinair gwallus yn %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Gwrthodwyd caniatâd wrth drosglwyddo %s i %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Methu canfod %s ar %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "Nid yw %s yn ymateb"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"Roedd y trosglwyddiad yn llwyddiannus\n"
-"Efallai'r hoffech wirio eich bod yn gallu mewngofnodi i'r gwasanaether "
-"gyda:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"heb dderbyn cais am gyfrinair"
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "Dim CD-R/DVD-R yn y gyrrwr!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Nid yw'n ymddangos fel cyfrwng cofnodi."
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Nid yw'n gyfrwng dileadwy!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Bydd yn cymryd ychydig o amser i ddileu'r cyfrwng."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Anawsterau caniatâd wrth gael mynediad i'r CD."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "Dim tâp yn %s!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Ffeiliau system wrth gefn"
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Ffeiliau cadw wrth gefn y Disg Caled"
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Cadw wrth gefn ffeiliau eraill..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Cynnydd Disg Caled wrth Gefn..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Dim newid i'r ffeil wrth gefn!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Anhawster cysylltiad FTP: Nid oedd yn bosibl anfon eich ffeiliau wrth gefn "
-"drwy FTP.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr "Gwall wrth anfon ffeil drwy FTP. Cywirwch eich ffurfweddiad FTP."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "rhestr ffeil a yrrwyd gan FTP: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy CD:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Gweithgaredd Drakbackup drwy dâp:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr "Gwall wrth anfon e-bost. Cafodd eich adroddiad e-bost mo'i anfon."
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Gwall wrth anfon e-bost. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Methu creu catalog!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Gwiriwch bob dewis sydd angen arnoch.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Mae'r dewisiadau hyn yn gallu cadw wrth gefn ac adfer pob ffeil yn eich "
-"cyfeiriadur /etc.\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Cadw wrth gefn ffeiliau System. ( cyfeiriadur /etc )"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-"Defnyddio Cadw wrth Gefn Cynyddol/Differol (peidio disodli hen gadw wrth "
-"gefn)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Defnyddio Cadw wrth Gefn Cynyddol"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "Defnyddio Cadw wrth Gefn differu"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Peidio cynnwys ffeiliau hanfodol (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Gyda’r dewis hwn gallwch adfer unrhyw fersiwn\n"
-"o'ch cyfeiriadur /etc."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Gwiriwch bob defnyddiwr rydych am eu cynnwys yn eich cadw wrth gefn."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "Peidio cynnwys storfa'r porwr"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Dewiswch y ffeiliau neu gyfeiriaduron a chliciwch 'Iawn'"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Tynnu'r Dewis"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Defnyddwyr"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Defnyddiwch gysylltiad rhwydwaith i gadw wrth gefn"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Dull Rhwyd:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "Defnyddiwch Expect ar gyfer SSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "Creu/Trosglwyddo allweddi wrth gefn ar gyfer SSH"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Trosglwyddo Nawr"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Allweddi eraill (nid drakbackup) yn eu lle yn barod"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Enw gwesteiwr neu IP."
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr "Cyfeiriadur (neu fodiwl) i osod y cadw wrth gefn ar y gwesteiwr."
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Cofiwch y cyfrinair"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Angen enw gwesteiwr, enw defnyddiwr a chyfrinair"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Defnyddiwch y CD/DVDROM i gadw wrth gefn"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Dewiswch eich dyfais CD/DVD"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Dewiswch faint eich cyfrwng CD/DVD"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "CD aml-sesiwn"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "Cyfrwng CDRW"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Dileu eich cyfrwng RW (Sesiwn 1af)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr "Dileu Nawr"
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "Cyfrwng DVD+RW"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "Cyfrwng DVD-R"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "dyfais DVDRAM"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "Heb ddiffinio dyfais CD!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Defnyddiwch dâp i gadw wrth gefn"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Enw dyfais i'w ddefnyddio ar gyfer cadw wrth gefn"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr "Cadw wrth gefn i Dâp"
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Peidio ailddirwyn y tâp wedi ei gadw wrth gefn"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Dileu'r tâp cyn cadw wrth gefn"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Tynnwch y tâp wedi cadw wrth gefn"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Rhowch y cyfeiriadur i gadw iddo:"
-
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr "Y cyfeiriadur i gadw iddo:"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CDROM / DVDROM"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Disg Caled / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "bob awr"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "dyddiol"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "bob wythnos"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "bob mis"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "arddull"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Ionawr"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Chwefror"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Mawrth"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "Ebrill"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Mai"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Mehefin"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Gorffennaf"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Awst"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Medi"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Hydref"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Tachwedd"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Rhagfyr"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Sul"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Llun"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Mawrth"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Mercher"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Iau"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Gwener"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Sadwrn"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Defnyddiwch ddaemon"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Dewiswch faint o amser fydd rhwng pob cadw wrth gefn"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "Gosodiad addasu/cofnod crontab:"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Munud"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Awr"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Diwrnod"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Mis"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Diwrnod yr wythnos"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Dewiswch y cyfrwng ar gyfer cadw wrth gefn."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"Gwnewch yn siwr bod daemon cron yn cael ei gynnwys yn eich gwasanaethau."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-"Os nad yw eich cyfrifiadur ymlaen drwy'r amser, byddai'n werth gosod anacron."
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr "Sylwer bod yr holl gyfrwng 'gwe' yn defnyddio'r ddisg galed."
-
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr "Dewiswch y math o gywasgiad"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Defnyddiwch ffeiliau .backupignore"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Anfonwch adroddiad e-bost wedi pob cadw wrth gefn i :"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "Gweinydd SMTP ar gyfer e-bost:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Dileu ffeiliau tar y Disg Caled wedi cadw cyfrwng arall wrth gefn."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Beth"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Lle"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Pryd"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Dewisiadau Eraill"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "Nid yw cyrchfan cadw wrth gefn wedi ei ffurfweddu..."
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Ffurfweddiad Drakbackup"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Dewiswch i le rydych am gadw ffeiliau wrth gefn"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "Dileu ffeiliau tar y Disg Caled wedi cadw cyfrwng arall wrth gefn."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "ar draws Rhwydwaith"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "ar CDROM"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "ar Ddyfais Tâp"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Defnyddwyr Cadw wrth Gefn"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr "(Rhagosodedig yw pob defnyddiwr)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Dewiswch beth rydych am ei gadw wrth gefn"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "System cadw wrth gefn"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Dewis defnyddwyr gyda llaw"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Dewiswch y data i'w gadw wrth gefn..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Ffynhonnell Cadw wrth Gefn:\n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau System: \n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau Defnyddiwr:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Ffeiliau Eraill: \n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"Cadw ar Ddisg caled ar lwybr: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tCyfyngu defnydd disg i %s Mb\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Dileu ffeiliau tar y disg caled wedi'r cadw wrth gefn.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- Llosgi i CD"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr "ar ddyfais: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr "(aml-sesiwn)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Cadw i dâp ar ddyfais: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tDileu=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr "\tCadw wrth gefn yn syth i Dâp\n"
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- Cadw drwy %s ar westeiwr: %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t enw defnyddiwr:%s\n"
-"\t\t ar lwybr: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"-Dewisiadau:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tPeidiwch cynnwys Ffeiliau System\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\t Bydd Cadw wrth gefn yn defnyddio tar a bzip2\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar a gzip\n"
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tBydd Cadw wrth Gefn yn defnyddio tar yn unig\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\tDefnyddiwch ffeiliau .backupignorey\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tAnfon e-bost at %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tDefnyddio gweinydd SMTP %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Daemon %s trwy:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Disg Caled.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Tâp \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Rhwydwaith drwy FTP.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Rhwydwaith drwy SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Rhwydwaith drwy rsync.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Dim ffurfweddiad, cliciwch Ddewin neu Uwch.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Rhestr o ddata i'w adfer:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "Adfer Ffeiliau'r System.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "       - o ddyddiad: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- Adfer Ffeiliau'r System: \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- Adfer Ffeiliau Eraill: \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Rhestr o ddata llwgr:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Dad-diciwch hwn neu ei dynnu'r tro nesaf."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Mae'r ffeiliau wrth gefn wedi eu llygru"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "         Mae eich dewis data wedi ei          "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          Ei adfer yn Llwyddiannus ar %s     "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "           Adfer y Ffurfweddiad"
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "Iawn i adfer ffeiliau eraill"
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Rhestr defnyddwyr i'w adfer ( dim ond y diweddaraf yn ôl y defnyddwyr, sy'n "
-"bwysig )"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "Dewiswch y dyddiad i'w adfer:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Adfer o'r Ddisg Galed."
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Rhowch y cyfeiriadur lle mae'r ffeiliau wrth gefn yn cael eu cadw"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr "Cyfeiriadur gyda chadw wrth gefn"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Dewis cyfrwng arall i adfer ohono"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Cyfrwng Arall"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Adfer y system"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Adfer Defnyddwyr"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Adfer Arall"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "dewis llwybr arall i adfer ( yn lle / )"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "Llwybr i Adfer Iddo"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Gwnewch gadw wrth gefn newydd cyn adfer ( ar gyfer cadw wrth gefn cynyddol "
-"yn unig )"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "Tynnu cyfeiriaduron defnyddiwr cyn adfer."
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr "Testun enw ffeil i chwilio amdano (llinyn gwag yn cydweddu popeth):"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "Chwilio Copïau wrth Gefn"
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "Heb ganfod cydweddiad..."
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Adfer y Dewis"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-"Cliciwch ddyddiad/amser i weld ffeiliau wrth gefn.\n"
-"Clicio+Ctr; ffeiliau i ddewis ffeiliau niferus."
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"Adfer Cofnod\n"
-"Catalog a Ddewiswyd"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Adfer y Dewis\n"
-"Ffeiliau"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "Heb ganfod y  ffeiliau wrth gefn yn %s."
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Adfer o'r CD"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Rhowch yr CD gyda label cynnwys%s\n"
-"yn y gyrrwr CD o dan bwynt gosod /mnt/cdrom"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Nid y label CD cywir. Disg wedi ei labelu %s."
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Adfer o Dâp"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Rhowch y tâp gyda label cynnwys%s\n"
-"yn y gyrrwr tâp %s"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Nid y label tâp cywir. Tâp wedi ei labelu %s."
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Adfer drwy'r Rhwydwaith"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Adfer drwy Brotocol Rhwydwaith: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Enw Gwesteiwr"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Llwybr Gwesteiwr neu Fodiwl "
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Mae angen cyfrinair"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Mae angen enw defnyddiwr"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Mae angen enw gwesteiwr"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Llwybr neu Fodiwl angenrheidiol"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "Adferwyd ffeiliau..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Methodd Adfer..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "Heb ail estyn %s..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Chwilio am ffeiliau i'w hadfer"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Adfer pob cadw wrth gefn"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Adfer Dewisol"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Adfer o'r Catalog"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Methu canfod cadw wrth gefn i'w hadfer...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Gwirio mai %s yw'r llwybr cywir"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " ac mae'r CD yn y gyrrwr"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr "Cadw wrth gefn ar gyfrwng anosodadwy - Defnyddiwch Gatalog i'w adfer"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "CD yn ei le - ewch ymlaen"
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "Pori i'r ystorfa newydd adferwyd"
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr "Cyfeiriadur i Adfer Ohono"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Adfer Cynnydd"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Adeiladu Cadw wrth Gefn"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Adfer"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Mae'r pecynnau canlynol angen eu gosod:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Dewiswch y data i'w adfer..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Ffeiliau System Cadw wrth Gefn"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Ffeiliau Defnyddiwr Cadw wrth Gefn"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Cadw'r ffeiliau eraill wrth gefn"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Cyfanswm Cynnydd"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "Anfon ffeiliau drwy FTP"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Anfon ffeiliau..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Cadwch wrth Gefn eich ffeiliau ffurfweddu"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Edrych ar Ffurfweddiad Cadw wrth Gefn"
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Ffurfweddiad y Dewin"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Ffurfweddiad Uwch"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Edrych ar Ffurfweddiad"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "Darllen y Cofnod Olaf"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Cadw wrth Gefn Nawr"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Ni chanfuwyd y ffeil ffurfweddu \n"
-"cliciwch Dewin neu Uwch."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Ffeil"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Ffeil/_Gadael"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"Nid yw eich cychwynnwr ym modd byffer ffrâm. I weithredu cychwyn graffigol, "
-"dewiswch y modd fideo graffig i'r offeryn ffurfweddu'r cychwynnwr."
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "Hoffech chi ei ffurfweddu?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Gosod themâu"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Dewis themâu cychwyn graffigol"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Thema"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Dangos thema\n"
-"yn y consol"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Creu thema newydd"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Defnyddiwr rhagosodedig"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Bwrdd gwaith rhagosodedig"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Na, dydw i ddim eisiau awtomewngofnodi"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Iawn, rwyf eisiau awto mewngofnodi gyda (defnyddiwr, bwrdd gwaith)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Modd system"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Cychwyn yr amgylchedd graffigol wrth gychwyn eich system"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-"Dewiswch fodd fideo, fydd yn cael ei osod ar gyfer pob cofnod cychwyn "
-"dewiswyd isod.\n"
-"Gwnewch yn siŵr fod eich cerdyn fideo yn cynnal y modd rydych yn ei ddewis."
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Offeryn Cofnodi Gwall Mandriva Linux"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Canolfan Rheoli Mandriva Linux"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Offeryn Cydamseru"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Offer Unigol"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Rheoli o Bell"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Rheolwr Meddalwedd"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Offeryn Trosglwyddo o Windows"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Dewin Ffurfweddu"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr "Dewis Offeryn Mandriva:"
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"neu Enw Rhaglen\n"
-"(neu Lwybr Llawn):"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Canfod Pecyn"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Pecynnau"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"I gyflwyno adroddiad gwall, cliciwch ar y botwm adroddiad.\n"
-"Bydd hyn yn agor ffenestr porwr gwe yn %s lle welwch ffurflen i'w llenwi. "
-"Bydd yr wybodaeth rhowch arno'n cael ei drosglwyddo i'r gweinydd.\n"
-"Pethau defnyddiol i'w cynnwys yn yr adroddiad fyddai allbwn lspci, fersiwn y "
-"cnewyllyn a /proc/cpuinfo."
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Adroddiad"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Heb ei osod"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Pecyn heb ei osod"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "heb ddiffinio"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Newid Cylchedd Amser"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Cylchfa Amser - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "A yw eich cloc caledwedd wedi ei osod i GMT?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "Protocol Amser Rhwydwaith"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"Mae eich cyfrifiadur yn gallu cydweddu ei gloc\n"
-" gyda gweinydd pell drwy NTP"
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Galluogi Protocol Amser Rhwydwaith"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Gweinydd:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr "Methu cydweddu gyda %s."
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Ailosod"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Mae angen gosod pecyn ntp\n"
-" i alluogi Protocol Amser Rhwydwaith\n"
-"\n"
-"Hoffech chi osod ntp?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ffurfweddiad y rhwydwaith (%d addasydd)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Mynedfa:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Rhyngwyneb:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Arhoswch"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Rhyngwyneb"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Stad"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Enw gwesteiwr: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Ffurfweddu enw gwestai"
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "Ffurfweddiad y Rhwydwaith Lleol"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Ffurfweddu'r Rhwydwaith Lleol..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Gosod"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Rheoli cysylltiadau"
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr "Dewiswyd y ddyfais"
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "Ffurfweddiad IP"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "Gweinydd DNS"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Chwilio Parth"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "statig"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Rheolwr llif"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Terfyn llinell"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Goramser modem"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Dewiswch ffeil clo"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Arhoswch am y tôn deialu cyn deialu"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "Prysur arhoswch"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "Sain modem"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Galluogi"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Analluogi"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Dosbarth y cyfrwng"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Enw'r modiwl"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "Cyfeiriad Mac"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Bws"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Lleoliad ar y bws"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Nid oes addasydd rhwydwaith ethernet wedi ei ganfod ar eich system. Rhedwch "
-"yr offeryn ffurfweddu caledwedd."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Tynnu rhyngwyneb rhwydwaith"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Dewis y rhyngwyneb rhwydwaith i'w dynnu:"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Digwyddodd gwall wrth ddileu rhyngwyneb rhwydwaith \"%s\":\n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "Llongyfarchiadau, dilëwyd rhyngwyneb \"%s\" yn llwyddiannus"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "Dim IP"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Dim Mask"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "fyny"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "lawr"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Wedi cysylltu"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Heb gysylltu"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Datgysylltu..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Cysylltu..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "Dad weithredu nawr"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "Cychwyn nawr"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Nid oes gennych unrhyw rhagwynebau wedi\n"
-"eu ffurfweddio. Ffurfweddwch nhw'n gyntaf\n"
-"drwy glicio ar 'Ffurfweddu'"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "Ffurfweddiad Rhwydwaith Lleol (LAN)"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Addasydd %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Protocol Cychwyn"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Cychwyn y peiriant"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Nid yw'r rhag wyneb hwn wedi ei ffurfweddu eto.\n"
-"Cychwynnwch y cynorthwyydd \"Ychwanegu rhyngwyneb\" o' Ganolfan Rheoli "
-"Mandriva"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Nid oes gennych gyswllt wedi ei ffurfweddu â'r Rhyngrwyd.\n"
-"Cychwynnwch gynorthwy-ydd \"%s\" o Ganolfan Rheoli Mandriva"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Gosod rhygnwyneb rhwydwaith newydd (LAN, ISDN, ADSL, ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Ffurfweddiad cysylltiad â'r Rhyngrwyd"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "Trydydd gweinydd DNS (dewisol)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Ffurfweddu Cysylltiad â'r Rhyngrwyd"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Mynediad i'r Rhyngrwyd"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Math o gyswllt:"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Statws"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr "GDM (rheolwr arddangos GNOME)"
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr "KDM (rheolwr arddangos KDE)"
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr "MdkKDM (rheolwr arddangos Mandriva Linux)"
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr "XDM (rheolwr arddangos X)"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Dewis rheolwr arddangos"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Mae'r Rheolwr Arddangos X11 yn caniatáu i chi fewngofnodi\n"
-"i'ch system yn graffigol gyda'r X Windows System yn rhedeg. Mae'n cynnal\n"
-"rhedeg amryw o sesiynau X ar eich cyfrifiadur ar yr un pryd."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Mae'r newid wedi ei gyflawni. Ailgychwyn gwasanaeth dm?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-"Rydych yn mynd i gau pob rhaglen sy'n rhedeg a cholli eich sesiwn presennol. "
-"Ydych chi'n siŵr eich bod am ailgychwyn y gwasanaeth dm?"
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "Creu disg cychwyn"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Cyffredinol"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Dyfais"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Fersiwn cnewyllyn"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Dewisiadau"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Dewisiadau Uwch"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Maint"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Ymresymiad dewisol mkinitrd"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "grym"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "peidio cynnwys modiwlau raid"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "os oes angen"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "peidio cynnwys modiwlau scsi"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Ychwanegu modiwl"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Tynnu modiwl"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Gwnewch yn siŵr fod y deunydd ar gael ar gyfer y ddyfais %s"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Does dim cyfrwng neu mae wedi ei amddiffyn rhag ysgrifennu i'r ddyfais %s.\n"
-"Rhowch un i mewn.."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Methu fforchio: %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Creu disg meddal wedi ei gwblhau"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "Mae creu'r disg meddal cychwyn wedi bod yn llwyddiant\n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Methu cau mkbootdisk yn iawn: \n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Chwilio am ffontiau wedi eu gosod"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Tynnu ffontiau wedi eu gosod"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "pob ffont"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "Heb ganfod ffontiau"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "gorffen"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "Methu canfod unrhyw ffont yn eich rhaniad gosodedig"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Ailddewis y ffontiau cywir"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "Methu canfod unrhyw ffontiau.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Chwilio am ffontiau yn y rhestr gosod"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "trosi ffontiau %s"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Copïo ffontiau"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Gosod ffontiau True Type"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "arhoswch yn ystod ttmkfdir..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "Wedi gosod True Type"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "adeiladu math 1inst"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "cyfeirio Ghostscript"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Llethu Ffeiliau Dros dro"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Ail gychwyn XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Llethu ffeiliau Ffontiau"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "ail gychwyn xfs"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Cyn gosod unrhyw ffontiau, gwnewch yn siŵr bod gennych yr hawl i'w defnyddio "
-"a'u gosod ar eich system.\n"
-"\n"
-"- Gallwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
-"ffontiau ffug rewi eich Gweinydd X."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Rhestr Ffontiau"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Ynghylch"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Dad osod"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Mewnforio"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"Hawlfraint (C) 2001-2002  Mandriva \n"
-"\n"
-"\n"
-"        DUPONT Sebastien sdupont (fersiwn wreiddiol)\n"
-"\n"
-"        CHAUMETTE Damien<dchaumette@mandriva.com\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Mae'r rhaglen hon yn feddalwedd rhydd; gallwch ei ailddosbarthu\n"
-"a/neu ei newid o dan amodau Trwydded Gyhoeddus Gyffredinol GNU\n"
-"fel sydd wedi ei gyhoeddi gan y Free Software Foundation; un ai fersiwn\n"
-"2 neu (yn ôl eich dewis) unrhyw fersiwn diweddarach.\n"
-"\n"
-"\n"
-" Mae'r rhaglen yn cael ei ddosbarthu yn y gobaith y bydd yn ddefnyddiol,\n"
-" ond HEB UNRHYW WARANT; heb hyd yn oed awgrym o warant o\n"
-" FASNACHEIDDRWYDD nag ADDASRWYDD AR GYFER PWRPAS\n"
-" PENODOL. Gweler Trwydded Gyhoeddus Gyffredinol GNU am fwy o\n"
-" wybodaeth.\n"
-"\n"
-"\n"
-" Dylech fod wedi derbyn copi o Drwydded Gyhoeddus Gyffredinol GNU\n"
-" gyda'r rhaglen; os nad, ysgrifennwch at:\n"
-" Free Software  Foundation, Inc., 59 Temple Place - Suite 330, Boston,\n"
-"MA 02111-1307, USA"
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"Diolch:\n"
-"    -  pfm2afm:   \n"
-"\t gan Ken Borgendale:\n"
-"\t    Trosi ffeil .pfm Windows i .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t gan James Macnicol: \n"
-"\t    type1inst cynhyrchu files fonts.dir fonts.scale a Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  gan Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Trosi ffeiliau ffont i ffontiau afm pfb\n"
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Dewiswch y rhaglenni fydd yn cynnal ffontiau:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Cyn gosod unrhyw ffontiau, gwnewch yn siŵr fod gennych yr hawl i'w defnyddio "
-"a'u gosod ar eich system.\n"
-"\n"
-"- Gallwch osod y ffontiau yn y dull arferol. Mewn achosion prin, gall "
-"ffontiau ffug rewi Gwasanaethwr X."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Argraffyddion Generig"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Dewiswch ffeil neu gyfeiriadur y ffont a chlicio 'Ychwanegu'"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Dewis ffeiliau"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr "Wynebfathau"
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Mewnforio ffontiau"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Ychwanegu ffontiau"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "cliciwch yma os ydych yn siŵr."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "yma os nad."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Dad ddewis Popeth"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Dewis Popeth"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Rhestr Tynnu"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "Mewnforio ffontiau"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Prawf Init"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Copïo'r ffontiau ar eich system!"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Gosod a throsi ffontiau"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Wedi'r Gosod"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Tynnu ffontiau oddi ar eich system!"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Wedi'r dad osod"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Rhannu Cysylltiad â'r Rhyngrwyd"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Mae'n ddrwg gennym, dim ond cnewyllyn 2.4 sy'n cael ei gynnal."
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Mae Rhannu Cysylltiad â'r Rhyngrwyd wedi ei analluogi"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad rhannu cysylltiad â'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei analluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "galluogi"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "ail-ffurfweddu"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "gwrthod"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Galluogi gweinyddion..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Mae Rhannu Cysylltiad â'r Rhyngrwyd wedi ei alluogi."
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Mae Rhannu Cysylltiad â'r Rhyngrwyd wedi ei alluogi"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosodiad Rhannu Cysylltiad â'r Rhyngrwyd wedi ei gyflawni. \n"
-"Mae wedi ei alluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "dymunol"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Analluogi gweinyddion..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Mae Rhannu Cysylltiad â'r Rhyngrwyd wedi ei analluogi."
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i rannu ei gysylltiad Rhyngrwyd\n"
-"Gyda'r nodwedd hon bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"gallu rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
-"\n"
-"Gwnewch yn siŵr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
-"gyda drakconnect cyn mynd ymhellach.\n"
-"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Rhyngwyneb %s (gan ddefnyddio modiwl %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Rhyngwyneb %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Nid oes addasydd rhwydwaith ar eich system!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Rhyngwyneb rhwydwaith"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Dim ond un addasydd rhwydwaith wedi ei ffurfweddu sydd ar eich system\n"
-"\n"
-"%s\n"
-"\n"
-"Rwyf ar fin gosod eich Rhwydwaith Lleol gyda'r addasydd hwnnw.."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Dewiswch rhag wyneb  y rhwydwaith"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Dewiswch ba addasyddion rhwydwaith fydd yn cael eu cysylltu â'ch Rhwydwaith "
-"Lleol."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Mae rhag wyneb y rhwydwaith wedi ei ffurfweddu eisoes"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Rhybudd, mae'r addaswr rhwydwaith (%s) wedi ei ffurfweddu eisoes.\n"
-"\n"
-"Ydych chi eisiau ail ffurfweddiad awtomatig?\n"
-"\n"
-"Gallwch ei wneud gyda llaw ond mae'n rhaid i chi wybod beth ydych yn ei "
-"wneud."
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Ail ffurfweddiad awtomatig"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "Na (arbenigwyr yn unig)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Dangoswch y ffurfweddiad rhag wyneb cyfredol"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Ffurfweddiad rhyngwyneb cyfredol"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Ffurfweddiad presennol '%s':\n"
-"\n"
-"Rhwydwaith: %s\n"
-"Cyfeiriad IP: %s\n"
-"Priodweddau IP: %s\n"
-"Gyrrwr: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Medraf gadw eich ffurfweddiad cyfredol a chymryd eich bod eisoes wedi gosod "
-"gweinydd DHCP. Os felly, dilyswch fy mod wedi darllen y rhwydwaith dosbarth "
-"C rydych yn ei ddefnyddio fel eich rhwydwaith lleol, yn gywir. Ni fyddaf yn "
-"ei newid na chyffwrdd â ffurfweddiad eich gweinydd DHCP.\n"
-"\n"
-"Y cofnod DNS rhagosodedig yw'r enw gweinydd storio sydd wedi ei ffurfweddu "
-"yn y mur cadarn. Mae modd i chi ei newid am eich IP DNS ISP, e.e. \n"
-"\n"
-"Neu, medraf ail ffurfweddu eich rhag wyneb ac (ail)ffurfweddi gweinydd DHCP "
-"ar eich cyfer.\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Cyfeiriad y Rhwydwaith Lleol "
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"Ffurfweddiad Gweinydd DHCP\n"
-"\n"
-"Mae modd dewis dewisiadau gwahanol ar gyfer ffurfweddiad DHCP.\n"
-"Os nad ydych yn gwybod ystyr y dewis, gadewch lonydd iddo."
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Gweinydd DHCP IP (Hwn)"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "Y Gweinydd DHCP IP"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Enw'r parth mewnol"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "Amrediad cychwyn DHCP"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "Amrediad terfyn DHCP"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Les rhagosodedig (mewn eiliadau)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Les fwyaf (mewn eiliadau)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Ail ffurfweddi rhag wyneb a gweinydd DHCP"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Nid yw'r Rhwydwaith Lleol yn terfynu gyda '.0', tynnu allan."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Canfuwyd gwrthdaro posib yng nghyfeiriad LAN ffurfweddiad presennol %s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Ffurfweddu..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ffurfweddi sgriptiau, gosod meddalwedd, cychwyn gweinyddion..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Anhawster wrth osod pecyn %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Mae popeth wedi ei ffurfweddu\n"
-"Gallwch rannu cysylltiad â'r Rhyngrwyd gyda chyfrifiaduron eraill ar eich "
-"Rhwydwaith Lleol gan ddefnyddio ffurfweddiad rhwydwaith awtomatig (DHCP) a "
-"gweinydd Transparent Proxy Cache (SQUID)"
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"Hawlfraint (C) 2003-2005 Mandriva.\n"
-"Mae hwn yn feddalwedd rhydd ac mae modd ei ailddosbarthu o dan amodau GNU "
-"GPL.\n"
-"\n"
-"Defnydd: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - dangos cymorth     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_label>       - llwyth y dudalen cymorth html  sy'n cyfeirio at "
-"id_label\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-" --doc <link>          - cyswllt i dudalen we arall ( ar gyfer blaen croeso  "
-"WM)\n"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Canolfan Gymorth Mandriva Linux"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"Methu dangos %s \n"
-". Dim cofnod Cymorth o'r fath\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Gosodiadau'r system"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Gosodiadau addasu"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Gosodiadau addasu a system"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Golygadwy"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Llwybr"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Defnyddiwr"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Grŵp"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Caniatâd"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr "Ychwanegu rheol newydd"
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Golygu'r rheol bresennol"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Mae modd gweld ffeiliau i'w defnyddio i drwsio caniatâd, perchnogion, a "
-"grwpiau drwy msec.\n"
-"Mae modd i chi olygu eich rheolau eich hun fydd yn ysgrifennu dros y rheolau "
-"rhagosodedig."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"%s yw'r lefel diogelwch presennol\n"
-"Dewiswch ganiatâd i weld/golygu"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "I fyny"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Symud y rheol i fyny un lefel"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "I lawr"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Symud y rheol i lawr un lefel"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Ychwanegu rheol"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Ychwanegu rheol newydd ar y diwedd"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Dileu'r rheol hon"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Golygu"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "pori"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "defnyddiwr"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "grŵp"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "arall"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Darllen"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "Galluogi \"%s\" i ddarllen y ffeil"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Ysgrifennu"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "Galluogi \"%s\" i ysgrifennu i'r ffeil"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Gweithredu"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Galluogi \"%s\" i weithredu'r ffeil"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Defnydd cyfeiriadur:\n"
-" dim ond perchennog y cyfeiriadur neu ffeil yn y cyfeiriadur hwn fydd yn "
-"cael ei ddileu."
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Defnyddio enw perchennog i weithredu"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Defnyddio enw grŵp i weithredu"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Defnyddiwr :"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Grŵp :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Derbyn presennol"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "Wedi ei dicio, nid fydd y perchennog a'r grwp yn cael ei newid"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Dewis llwybr"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Eiddo"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Ffurfweddiad Gweinydd PXE"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Ffurfweddiad Gweinydd Gosod"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i weinydd PXE fel gweinydd DHCP a "
-"gweinydd\n"
-"TFTP i adeiladu gweinydd gosod.\n"
-"Gyda'r nodwedd hon bydd cyfrifiaduron eraill ar eich rhwydwaith lleol yn "
-"gallu rhannu cyswllt rhyngrwyd y cyfrifiadur hwn.\n"
-"\n"
-"Gwnewch yn siŵr eich bod wedi ffurfweddu eich mynediad Rhwydwaith/Rhyngrwyd "
-"gyda drakconnect cyn mynd ymhellach.\n"
-"\n"
-"Sylwer: bydd angen Addasydd Rhwydwaith un-pwrpas i greu Rhwydwaith Lleol "
-"(LAN)."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Dewiswch ba ryngwyneb rhwydwaith i'w ddefnyddio ar gyfer y gweinydd DHCP."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Rhyngwyneb %s (ar rwydwaith %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"Mae'r gweinydd DHCP yn caniatáu i gyfrifiaduron eraill gychwyn drwy "
-"ddefnyddio PXE ar ystod\n"
-"penodol o gyfeiriadau\n"
-"Y cyfeiriad rhwydwaith yw %s gan ddefnyddio netmask o %s\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "Enw cychwyn DHCP"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "Enw terfyn DHCP"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Dangoswch lle bydd y ddelwedd gosod ar gael.\n"
-"\n"
-"Os nad oes gennych gyfeiriadur yn barod, copïwch gynnwys y CD neu'r DVD.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Cyfeiriadur delwedd gosod"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Heb ganfod delwedd"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Heb ganfod delwedd CD neu DVD, copïwch y rhaglen osod a'r ffeiliau rpm."
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Dangoswch lle mae'r ffeil auto_install.cfg wedi ei leoli,\n"
-"\n"
-"Gadael yn wag os ydych am greu modd gosod yn awtomatig.\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Lleoliad ffeil auto_install.cfg"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr "ESSID"
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Modd"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Sianel"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr "Allwedd"
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Rhwydwaith:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Modd:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Amgryptiad:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Arwydd:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr "Crwydro"
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr "Crwydro: %s"
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "diffodd "
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr "Cyfnod sganio (eil): "
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr "Set"
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr "Rhwydweithiau Hybys (Llusgo fyny/lawr neu olygu)"
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Cysylltu"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr "Rhwydweithiau ar Gael"
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Ailsganio"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Statws"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Datgysylltu"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Adnewyddu"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "ymlaen"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "ALL"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "LOCAL"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Anwybyddu"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"Dyma'r fan i osod lefel diogelwch a gweinyddiad eich system\n"
-"\n"
-"\n"
-"Y '<span weight=\"bold\">Gweinyddwr Diogelwch</span>' yw'r un fydd yn\n"
-"derbyn y rhybuddion diogelwch os yw'r dewis '<span\n"
-"weight=\"bold\">Rhybudd Diogelwch</span>' wedi ei osod. Gall fod yn enw\n"
-"defnyddiwr neu e-bost.\n"
-"\n"
-"\n"
-"Mae'r ddewislen Lefel Diogelwch yn caniatáu i chi ddewis un o'r lefelau\n"
-"diogelwch ragosodedig ddarparwyd gan msec. Mae'r lefelau yn amrywio o\n"
-"ddiogelwch '<span weight=\"bold\">gwan</span>' a hawdd ei ddefnyddio, i\n"
-"safon '<span weight=\"bold\">paranoia</span>', sy'n addas ar gyfer\n"
-"rhaglenni gwasanaethwr sensitif:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Gwan</span>: Mae'n hollol anniogel ond yn "
-"hawdd iawn i'w\n"
-"ddefnyddio. Dim ond ar gyfer peiriannau had ydynt wedi eu cysylltu ag unrhyw "
-"rwydwaith ac nad\n"
-"ydynt ar agor i bawb\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Safonol</span>:Dyma'r diogelwch safonol ar "
-"gyfer\n"
-"cyfrifiadur sy'n gysylltiedig â'r rhyngrwyd fel cleient.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Uchel</span>:Mae yna rhai cyfyngiadau,\n"
-"ac mae gwiriadau awtomatig ychwanegol yn cael eu rhedeg bob nos.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Uwch</span>: Mae'r diogelwch yn ddigon "
-"uchel\n"
-"i ddefnyddio'r system fel gweinydd sy'n gallu derbyn cysylltiadau gan lawer "
-"o\n"
-"gleientiaid. Os mai eich peiriant chi yw'r unig gleient ar i Fewnrwyd, "
-"dylech ddefnyddio lefel is.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoia</span>. Mae'n debyg i'r lefel "
-"blaenorol ond mae'r\n"
-"system yn hollol gaeedig ac mae'r nodweddion diogelwch ar eu heithaf."
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Disgrifiad y meysydd:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(gwerth rhagosodedig: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Lefel diogelwch:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Gweinyddwr Diogelwch:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Dewisiadau Sylfaenol"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Dewisiadau Rhwydwaith"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Dewisiadau System"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Gwirydd Cyfnodol"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Arhoswch, gosod lefel diogelwch..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Arhoswch, gosod dewisiadau diogelwch..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Heb ganfod Cerdyn Sain!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Nid oes Cerdyn Sain wedi ei ganfod ar eich peiriant. Gwriwch fod Cerdyn Sain "
-"sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
-"\n"
-"\n"
-"Cewch ymweld â'n cronfa ddata caledwedd yn:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Nodyn: os oes gennych gerdyn sain ISA PnP, bydd rhaid i chi ddefnyddio "
-"rhaglen sndconfig. Teipiwch \"sndconfig\" mewn consol."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"i weithio'n iawn mae angen 'ImageMagick' i gwblhau'r ffurfweddiad.\n"
-"Cliciwch \"Iawn\" i osod 'Image Magick' neu \"Diddymu\" i orffen"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"blwch testun cydfesuryn x\n"
-"mewn rhif nodau"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"blwch testun cydfesuryn y\n"
-"mewn rhif nodau"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "lled testun"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "uchder blwch testun"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"bar cynnydd cydfesuryn x\n"
-"yn ei gornel uchaf chwith"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"bar cynnydd cydfesuryn y\n"
-"yn ei gornel uchaf chwith"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "lled y bar cynnydd"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "uchder y bar cynnydd"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Arddangos logo yn y Consol"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Enw Thema"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "cydraniad terfynol"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "cadw thema"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "cadw thema Croeso cychwyn..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "dewis ymyl"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Dewis lliw ProgressBar"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr "Cysylltwyd drwy borth cyfresol neu gebl usb"
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "Ychwanegu dyfais UPS"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Croeso i'r offeryn ffurfweddu UPS\n"
-"\n"
-"Yma bydd modd i chi osod UPS newydd i'r system.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-"Rydym am ychwanegu dyfais UPS.\n"
-"\n"
-"Ydi hi'n well gennych awtoganfod dyfeisiadau UPS i'r peiriant neu?"
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "Awtoganfod"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Canfod ar waith"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Llongyfarchiadau"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "Mae'r dewin wedi ychwanegu'r dyfeiriau UPS yn llwyddiannus:"
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "Wedi canfod dyfais UPS newydd"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "Ffurfweddiad gyrrwr UPS"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "Dewiswch eich model UPS"
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "Gwneuthurwr / Model"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-"Rydym yn ffurfweddu'r UPS \"%s\" o \"%s\".\n"
-"Rhowch ei enw, gyrrwr a phort."
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Enw:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr "Enw eich UPS"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr "Y gyrrwr sy'n rheoli eich UPS"
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Porth :"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "Y porth sydd wedi ei chysylltu â'ch UPS"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "Mae'r dewin wedi ffurfweddu eich dyfais UPS \"%s\"  yn llwyddiannus."
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "Dyfeisiau UPS"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Enw"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "Defnyddwyr UPS"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr "Rhestrau Rheoli Mynediad"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr "Masg IP"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Rheolau"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Gweithred"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Lefel"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "Enw ACL"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUPS"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Croeso i'r offer ffurfweddu UPS"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "Mae cyswllt VPN wedi ei alluogi"
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosod VPN wedi ei gyflawni.\n"
-"\n"
-"Mae wedi ei alluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "Analluogi VPN..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "Mae cyswllt VPN wedi ei analluogi."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "Mae cyswllt VPN wedi ei analluogi"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Mae gosod cyswllt VPN wedi ei gyflawni.\n"
-"\n"
-"Mae wedi ei analluogi. \n"
-"\n"
-"Beth hoffech ei wneud?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "Galluogi VPN..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "Mae cyswllt VPN wedi ei alluogi."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "Gosodiad VPN syml."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-"Rydych ar fin ffurfweddu eich cyfrifiadur i ddefnyddio cysylltiad VPN.\n"
-"\n"
-"Gyda'r nodwedd yma, mae cyfrifiaduron ar eich rhwydwaith breifat leol\n"
-"a chyfrifiaduron ar rwydweithiau preifat pell yn gallu rhannu adnoddau,\n"
-"drwy eu muriau cadarn, dros y rhyngrwyd, mew dull diogel.\n"
-"\n"
-"Mae'r cyfathrebu ar draws y we wedi ei amgryptio. Mae'r cyfrifiaduron\n"
-"lleol a phell yn edrych fel petaent ar yr un rhwydwaith.\n"
-"\n"
-"Gwnewch yn siŵr eich bod wedi ffurfweddu eich mynediad\n"
-"Rhwydwaith/Rhyngrwyd gan ddefnyddio drakaccess cyn mynd ymhellach."
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-"Cyswllt VPN.\n"
-"\n"
-"Mae'r rhaglen hon wedi ei seilio ar y projectau canlynol:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Darllenwch O LEIAF dogfennau ipsec-howto\n"
-"cyn mynd ymhellach."
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Modiwl cnewyllyn."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-"Rhaid i'r cnewyllyn gael cefnogaeth ipsec.\n"
-"\n"
-"Rydych yn rhedeg fersiwn cnewyllyn %s.\n"
-"\n"
-"Mae gan y cnewyllyn gefnogaeth '%s'."
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Polisïau Diogelwch"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "racoon daemon IKE"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Ffeil ffurfweddiad"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-"Cam ffurfweddu !\n"
-"\n"
-"Rhaid diffinio polisïau ac yna ffurfweddu'r daemon\n"
-"cyfnewid (IKE) allwedd awtomatig. Enw'r daemon KAME\n"
-"IKE rydym yn ei ddefnyddio yw 'racoon'.\n"
-"\n"
-"Beth hoffech chi ei ffurfweddu?\n"
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-"Nesaf byddwn yn ffurfweddu ffeil %s.\n"
-"\n"
-"\n"
-"Cliciwch Nesaf.\n"
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s cofnod"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-"Mae cynnwys ffeil %s\n"
-"wedi ei rannu yn adrannau.\n"
-"\n"
-"Gallwch:\n"
-"\n"
-"  - ddangos, ychwanegu, olygu, neu dynnu adrannau, ac yna\n"
-"  - cyfrannu'r newidiadau\n"
-"\n"
-"Beth hoffech chi ei wneud ?\n"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Arddangos"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Cyflwyno"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Dangos ffurfweddiad"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-"Nid yw ffeil %s yn bod.\n"
-"\n"
-"Rhaid mai ffurfweddiad newydd yw hwn.\n"
-"\n"
-"Bydd rhaid mynd yn ôl  a dewis 'ychwanegu'.\n"
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "cofnodion ipsec.conf"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"Mae'r ffeil %s yn cynnwys adrannau gwahanol.\n"
-"\n"
-"Dyma'i sgerbwd :\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"Mae modd ychwanegu un o'r adrannau hyn.\n"
-"\n"
-"Dewiswch yr adran i'w hychwnaegu.\n"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "gosodiad ffurfweddu"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "normal conn"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Mae'n Bodoli!"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-"Mae adran gyda'r enw hwn yn bodoli eisoes.\n"
-"Rhaid i enw'r adrannau fod yn unigryw.\n"
-"\n"
-"Rhaid i chi fynd yn ôl ac ychwanegu adran arall\n"
-"neu newid ei enw.\n"
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Rhaid i'r adran hon fod ar frig eich ffeil %s.\n"
-"\n"
-"\n"
-"Gwnewch yn siŵr fod yr adrannau eraill yn dilyn\n"
-"yr adran ffurfweddu.\n"
-"\n"
-"Dewiswch barhau neu nôl ar ôl gorffen.\n"
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "rhyngwyneb"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsdebug"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "plutodebug"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "plutoload"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "plutostart"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "uniqueids"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-"Dyma'r adran gyntaf wedi'r un ffurfweddu'r\n"
-"gosod.\n"
-"\n"
-"Yma cewch ddiffinio'r gosodiadau rhagosodedig.\n"
-"Bydd yr adranau eraill yn dilyn hyn.\n"
-"Mae'r gosodiadau ar y chwith yn ddewisol.\n"
-"Os nad ydych am eu diffinio'n eang yma,\n"
-"cewch eu diffinio ym mhob adran.\n"
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "chwith"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Mae i'r ffeil %s nifer o adrannau, neu gysylltiadau.\n"
-"\n"
-"Cewch ychwanegu adran newydd yn awr.\n"
-"Dewiswch barhau wedi i chi orffen ysgrifennu at y data.\n"
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "enw'r adran"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "awtomatig"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "de"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "rightcert"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-"Mae adran gyda'r enw yma'n bod eisoes.\n"
-"Rhaid i enwau'r adrannau fod yn unigryw.\n"
-"\n"
-"Rhaid i chi fynd yn ôl ac ychwanegu adran arall\n"
-"neu newid enw'r adran.\n"
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Ychwanegu Polisi Diogelwch.\n"
-"\n"
-"Cewch ychwanegu Polisi Diogelwch.\n"
-"\n"
-"Dewiswch barhau pan fyddwch wedi ysgrifennu’r data.\n"
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Golygu adran"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-"Mae gan eich ffeil %s nifer o adrannau neu gysylltiadau.\n"
-"\n"
-"Gallwch ddewis yr un i'w olygu ac yna chlicio nesaf\n"
-"\n"
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Enw'r adran"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "Methu golygu!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-"Nid oes modd golygu'r adran hon.\n"
-"\n"
-"Mae'r adran yn orfodol ar gyfer Freeswan 2X.\n"
-"Rhaid pennu fersiwn 2.0 ar ben ffeil %s ac yn\n"
-"y diwedd, anablu neu alluogi amgryptiad cyfle.\n"
-"\n"
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Mae gan eich ffeil %s nifer o adrannau.\n"
-"\n"
-"Mae modd golygu gosodiad adran config.\n"
-"Dewiswch parhau wedi i chi orffen ysgrifennu'r data.\n"
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Mae gan eich ffeil %s nifer o adrannau neu gysylltiadau.\n"
-"\n"
-"Mae modd i chi nawr olygu cofnodion adran rhagosodedig\n"
-"Dewiswch barhau wedi i chi orffen ysgrifennu'r data.\n"
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Mae gan eich ffeil %s nifer o adrannau neu gysylltiadau.\n"
-"\n"
-"Mae modd i chi nawr olygu cofnodion adran rhagosodedig\n"
-"Dewiswch barhau wedi i chi orffen ysgrifennu'r data.\n"
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Golygu'r Polisi Diogelwch.\n"
-"\n"
-"Mae modd ychwanegu Polisi Diogelwch.\n"
-"\n"
-"Dewiswch barhau wedi i chi orffen ysgrifennu'r data\n"
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Tynnu adran"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-"Mae gan eich ffeil %s nifer o adrannau neu gysylltiadau.\n"
-"\n"
-"Mae modd golygu gosodiad adranconfig.\n"
-"Dewiswch barhau wedi i chi orffen ysgrifennu'r data.\n"
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-"Ffurfweddiad ffeil racoon.conf.\n"
-"\n"
-"Mae cynnwys yr adran wedi ei rannu'n adrannau.\n"
-"Gallwch :\n"
-"  - dangos \t\t (dangos cynnwys y ffeil)\n"
-"  - ychwanegu\t\t\t (ychwanegu adran)\n"
-"  - golygu \t\t\t (newid paramedrau'r adran bresennol)\n"
-"  - tynnu \t\t (tynnu'r adran bresennol)\n"
-"  - cyflwyno \t\t (ysgrifennu'r newidiadau i'r ffeil go iawn)"
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-"Nid yw ffeil %s yn bodoli \n"
-"\n"
-"Rhaid mai ffurfweddiad newydd yw hwn.\n"
-"\n"
-"Rhaid mynd yn ôl a dewis ffurfweddu.\n"
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "cofnodion racoonf.conf"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"Cam 'ychwanegu' adran.\n"
-"\n"
-"Dyma sgerbwd ffeil racoon.conf :\n"
-"\t'llwybr'\n"
-"\t'pell'\n"
-"\t'sainfo' \n"
-"\n"
-"Dewiswch yr adran hoffech ei hychwanegu.\n"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "llwybr"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "pell"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-"Cam adran 'ychwanegu llwybr'.\n"
-"\n"
-"Rhaid i'r adran llwybr fod ar frig eich ffeil racoon.conf.\n"
-"\n"
-"Rhowch eich llygoden dros y cofnod tystysgrif i gael cymorth ar-lein."
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "math o lwybr"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-"llwybr i gynnwys llwybr : pennu llwybr i gynnwys\n"
-"ffeil. Gw. Cynnwys Ffeil.\n"
-"\te.e.: llwybr yn cynnwys '/etc/racoon'\n"
-"\n"
-"llwybr ffeil pre_shared_key : pennu ffeil yn cynnwys\n"
-"allwedd(i) rhag rhannwyd ar gyfer enwau amrywiol. Gw. Ffeil Allwedd Rhag "
-"rhannu.\n"
-"\te.e: llwybr pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"llwybr tystysgrif llwybr : bydd racoon(8) yn chwilio'r cyfeiriadur\n"
-"os oes cais am dystysgrif neu dystysgrif wedi ei dderbyn.\n"
-"\te.e. : llwybr tystysgrif '/etc/cert' ;\n"
-"\n"
-"Cynnwys Ffeil : cynnwys ffeil \n"
-"cynnwys ffeiliau ffurfweddiad eraill.\n"
-"\te.e.: cynnwys \"remote.conf\" ;\n"
-"\n"
-"Ffeil Allwedd Rhag rhannu : Mae ffeil rhag rhannu'n diffinio pâr \n"
-"o ddynodwyr a'r allwedd gudd sy'n cael ei ddefnyddio yn\n"
-"Null dilysu allwedd rhag rhannu yn rhan1."
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "darllen ffeil"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Gwnewch yn siŵr fod gennych adrannau llwybr\n"
-"ar frig ffeil racoon.conf.\n"
-"\n"
-"Gallwch ddewis y gosodiadau pell yn awr.\n"
-"Dewiswch barhau neu nôl wedi i chi orffen.\n"
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Gwnewch yn siŵr fod yr adrannau llwybr\n"
-"eisoes ar frig eich ffeil %s.\n"
-"\n"
-"Gallwch nawr ddewis eich gosodiadau sainfo.\n"
-"Dewiswch Barhau neu Blaenorol wedi i chi orffen.\n"
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-"Mae gan eich ffeil %s nifer o adrannau neu gysylltiadau.\n"
-"\n"
-"Mae modd i chi ddewis o'r rhestr yr un i'w\n"
-"olygu a chlicio nesaf.\n"
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Mae gan eich ffeil %s nifer o adrannau.\n"
-"\n"
-"\n"
-"Mae modd golygu cofnodion yr adrannau pell.\n"
-"\n"
-"Dewiswch barhau wedi i chi orffen ysgrifennu'r data.\n"
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-"Mae gan eich ffeil %s nifer o adrannau.\n"
-"\n"
-"\n"
-"Mae modd golygu cofnodion yr adrannau pell.\n"
-"\n"
-"Dewiswch barhau wedi i chi orffen ysgrifennu'r data."
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Rhaid i'r adran hon fod ar frig eich\n"
-"ffeil %s.\n"
-"\n"
-"Gwnewch yn siwr fod yr holl adrannau eraill yn dilyn\n"
-"yr adrannau llwybr hyn.\n"
-"\n"
-"Gallwch olygu'r cofnodion llwybr.\n"
-"\n"
-"Dewiswch barhau neu nôl wedi i chi orffen.\n"
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "path_type"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-"Mae popeth wedi ei ffurfweddu.\n"
-"\n"
-"Cewch rannu adnoddau ar draws y Rhyngrwyd.\n"
-"mewn modd diogel, gan ddefnyddio cysylltiad VPN.\n"
-"\n"
-"Rhaid gwneud yn siwr fod yr adran twnel Shorewall\n"
-"wedi ei ffurfweddu."
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr "Cyfeiriad ffynhonnell sainfo"
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"diffinio'r paramedrau rhan 2 IKE\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"adeiladu source_id ac destination_id fel:\n"
-"\n"
-"\tcyfeiriad cyfeiriad [/ prefix] [[port]] ul_proto\n"
-"\n"
-"E.e. : \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tgadael y cofnod yn wag os ydych am fod yn anhysbys\n"
-"\n"
-"cyfeiriad sainfo 203.178.141.209 unrhyw gyfeiriad 203.178.141.218\n"
-"\t203.178.141.209 yw cyfeiriad y ffynhonnell\n"
-"cyfeiriad address 172.16.1.0/24 unrhyw gyfeiriad 172.16.2.0/24 \n"
-"\t172.16.1.0/24 yw cyfeiriad y ffynhonnell"
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr "Protocol ffynhonnell sainfo"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"diffinio'r paramedrau rhan 2 IKE\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"adeiladu source_id ac destination_id fel:\n"
-"\n"
-"\tcyfeiriad cyfeiriad [/ prefix] [[port]] ul_proto\n"
-"\n"
-"E.e. : \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tgadael y cofnod yn wag os ydych am fod yn anhysbys\n"
-"\n"
-"cyfeiriad sainfo 203.178.141.209 unrhyw gyfeiriad 203.178.141.218\n"
-"\t203.178.141.209 yw cyfeiriad y ffynhonnell"
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr "Cyfeiriad cyrchfan sainfo"
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"diffinio'r paramedrau rhan 2 IKE\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"adeiladu source_id ac destination_id fel:\n"
-"\n"
-"\tcyfeiriad cyfeiriad [/ prefix] [[port]] ul_proto\n"
-"\n"
-"E.e. : \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tgadael y cofnod yn wag os ydych am fod yn anhysbys\n"
-"\n"
-"cyfeiriad sainfo 203.178.141.209 unrhyw gyfeiriad 203.178.141.218\n"
-"\t203.178.141.218 yw cyfeiriad y cyrchfan\n"
-"\n"
-"cyfeiriad address 172.16.1.0/24 unrhyw gyfeiriad 172.16.2.0/24 \n"
-"\t172.16.1.0/24 yw cyfeiriad y ffynhonnell"
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr "Protocol cyrchfan sainfo"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"diffinio'r paramedrau rhan 2 IKE\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"adeiladu source_id ac destination_id fel:\n"
-"\n"
-"\tcyfeiriad cyfeiriad [/ prefix] [[port]] ul_proto\n"
-"\n"
-"E.e. : \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tgadael y cofnod yn wag os ydych am fod yn anhysbys\n"
-"\n"
-"cyfeiriad sainfo 203.178.141.209 unrhyw gyfeiriad 203.178.141.218\n"
-"\t203.178.141.209 yw cyfeiriad y cyrchfan"
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "Grŵp PFS"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-"diffinio grŵp o exponentiations Diffie-Hellman.\n"
-"Os nad ydych angen PFS yna cewch ymatal rhag y gyfarwyddeb.\n"
-"Bydd unrhyw gynnig yn cael ei dderbyn on na wnewch chi enwi un.\n"
-"y grŵp yn un o'r canlynol: modp768, modp1024, modp1536.\n"
-"Neu mae modd diffinio 1, 2, neu 5 fel rhif grŵp DH."
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "rhif hyd oes"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-"diffinio hyd oes o amser penodol fydd yn cael ei gynnig\n"
-"wrth negydu rhan 1. Bydd unrhyw gynnig yn cael ei dderbyn\n"
-"ac ni fydd y briodwedd(au)'n cael eu cynnig i'r cyfoed os nad\n"
-"ydynt yn cael eu cynnig.  Mae modd iddynt\n"
-"gael eu henwi yn unigol ym mhob cynnig .\n"
-"\n"
-"Enghreifftiau : \n"
-"\n"
-"        amser hyd oes 1 mun;    # eil,mun,awr\n"
-"        amser hyd oes 1 mun;    # eil,mun,awr\n"
-"        amser hyd oes 30 eil;\n"
-"        amser hyd oes 30 eil;\n"
-"        amser hyd oes 60 eil;\n"
-"\tamser hyd oes 12 awr;\n"
-"\n"
-"Felly, yma rifau hyd oes yw 1, 1, 30, 30, 60 a 12.\n"
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "Uned hyd oes"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-"diffinio hyd oes o amser penodol fydd yn cael ei gynnig\n"
-"wrth negydu rhan 1. Bydd unrhyw gynnig yn cael ei dderbyn\n"
-"ac ni fydd y priodwedd(au)'n cael eu cynnig i'r cyfoed os nad\n"
-"ydynt yn cael eu cynnig.  Mae modd iddynt\n"
-"gael eu henwi yn unigol ym mhob cynnig .\n"
-"\n"
-"Enghreifftiau : \n"
-"\n"
-"        amser hyd oes 1 mun;    # eil,mun,awr\n"
-"        amser hyd oes 1 mun;    # eil,mun,awr\n"
-"        amser hyd oes 30 eil;\n"
-"        amser hyd oes 30 eil;\n"
-"        amser hyd oes 60 eil;\n"
-"\tamser hyd oes 12 awr;\n"
-"\n"
-"Felly, yma unedau hyd oes yw 'mun', 'mun', 'eil', 'eil', 'eil' ac 'awr'.\n"
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "Algorithm dilysu"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "Algorithm cywasgu"
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr "dadchwythu"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Pell"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"pennu paramedrau rhan1 IKE ar gyfer  pob nod pell.\n"
-"Y porth rhagosodedig yw 500.  Os yw anhysbys yn cael eu bennu\n"
-"mae'r gosodiad yn wir i'r holl gyfoed nad ydynt yn cydweddu â\n"
-"chyfarwyddeb bell arall\n"
-"\n"
-"Enghreifftiau : \n"
-"\n"
-"pell anhysbys\n"
-"anhysbys ::1 [8000]"
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr "Modd cyfnewid"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-"diffinio'r modd cyfnewid ar gyfer rhan 1 lle mae racoon sy'n\n"
-"cychwyn. Mae hefyd yn golygu'r modd cyfnewid derbyniol lle\n"
-"mai racoon yw'r ymatebwr. Mae modd pennu mwy nag un\n"
-"modd drwy eu hymwahanu gan gollnod. Mae'r holl foddau'n\n"
-"dderbyniol. Y modd cyfnewid cyntaf yw'r hyn mae racoon yn\n"
-"ei ddefnyddio pan yw'n gychwynnydd.\n"
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "Polisi cynhyrchu"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-"Mae'r gyfarwyddeb hon ar gyfer yr ymatebwr. Rhaid\n"
-"gosod goddefol ymlaen fel bod racoon(8) yn unig\n"
-"sy'n dod ynn ymatebwr. Os nad oes gan yr ymatebwr\n"
-"unrhyw bolisi yn SPD yn ystod negydu rhan 2 ac mae'r\n"
-"cyfeiriad wedi ei droi ymlaen, yna bydd racoon(8) yn\n"
-"dewis y cynnig cyntaf yn y llwyth SA oddi wrth y\n"
-"cychwynnydd, a chynhyrchu cofnodion polisi o'r cynnig.\n"
-"Mae'n ddefnyddiol; negydu gyda'r cleient sydd wedi cyfeiriad\n"
-"IP yn ddeinamig. Sylwch y gall bo polisi anaddas wedi ei\n"
-"osod o fewn SPD'r ymatebydd gan y cychwynnydd. Fel bo\n"
-"cyfathrebu arall yn methu os yw polisïau'n gwrthdaro rhwng\n"
-"y cychwynnydd â'r ymatebwr. Bydd y gyfarwyddeb yn cael\n"
-"ei anwybyddu yn achos y cychwynnydd.\n"
-"Y gwerth rhagosodedig yw diffodd."
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "Goddefol"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-"Os nad ydych am gychwyn y negydu, gosodwch hwn\n"
-"i ymlaen. Y gwerth rhagosodedig yw diffodd.\n"
-"Mae'n ddefnyddiol ar gyfer gweinydd."
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "Math o dystysgrif"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "Ffeil Tystysgrif"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "Enw'r dystysgrif"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "Fy allwedd breifat"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "Enw'r allwedd breifat"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr "Tystysgrif ffeil cyfoed"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr "Enw tystysgrif cyfoed"
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "Gwirio tystysgrif"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-"Os nad ydych am wirio tystysgrif y cyfoed am ryw reswm,\n"
-"rhowch hwn ar ddiffodd. Y rhagosodedig yw ymlaen."
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "Fy enw"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-"pennu'r dynodwr anfonir at y gwesteiwr pell a'r math i'w\n"
-"ddefnyddio wrth negydu rhan 1.Mae modd defnyddio\n"
-"address, FQDN, user_fqdn, keyid a asn1dn fel idtype.\n"
-"cant eu defnyddio fel:\n"
-"\tcyfeiriad my_identifier [address];\n"
-"\t\ty math yw'r cyfeiriad IP. Hwn yw'r math rhagosodedig\n"
-"\t\tos nad ydych yn pennu enw i'w ddefnyddio.\n"
-"\tllinyn my_identifier user_fqdn;\n"
-"\t\tty math yw USER_FQDN (enw parth\n"
-"\t\tdefnyddiwr cymwysedig llawn).\n"
-"\tllinyn my_identifier fqdn;\n"
-"\t\ty math FQDN (enw parth cymwysedig llawn).\n"
-"\tffeil keyid my_identifier;\n"
-"\t\ty math yw KEY_ID.\n"
-"\tmy_identifier asn1dn [llinyn];\n"
-"\t\tmath enw  ASN.1 amlwg.  If\n"
-"\t\thpgor llinyn, bydd racoon(8) yn estyn DN o\n"
-"\t\tmaes pwnc yn y dystysgrif.\n"
-"\n"
-"Enghreifftiau : \n"
-"\n"
-"my_identifier user_fqdn \"fye-bost@fymharth.com\""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr "Dynodydd cyfoed"
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr "Cynnig"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-"pennu'r algorithm amgryptio i'w ddefnyddio ar gyfer\n"
-"negydu rhan 1. Rhaid i'r gyfarwyddeb gael ei diffinio.\n"
-"algorithm yw un o'r canlynol:\n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"Ni ddylid defnyddio'r gosodiad ar gyfer trawsffurfiau eraill. "
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "Algorithm hash "
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "Grŵp DH"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Gorchymyn"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "Ystod IP ffynhonnell"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "Ystod IP cyrchfan"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "Protocol haen uchaf"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "unrhyw"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Baner"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Cyfeiriad"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "Polisi IPsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "ipsec "
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr "dileu"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr "twnel"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr "trosglwyddo"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Ffynhonnell/cyrchfan"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr "gofynnol"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "rhagosodedig"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "defnydd"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "unigryw"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "UDA (darlledu)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "UDA (cebl)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "UDA (ceble-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Canada (cebl)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Siapan (darlledu)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Siapan (cebl)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "Tsieina (darlledu)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Gorllewin Ewrop"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Dwyrain Ewrop"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Ffrainc(SECAM)"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Seland Newydd"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Teledu Cebl Opus Awstralia"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Rhowch eich safon teledu a gwlad"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "Safon Teledu:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Ardal:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Wrthi'n sganio am sianeli Teledu ..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "Sganio am Sianel Teledu"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Digwyddodd gwall wrth sganio am sianelu teledu"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Diwrnod da i chi!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nawr mae modd i chi redeg Xawtv (o dan XWindows)!\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Heb ganfod Cerdyn Teledu!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Nid oes Cerdyn Teledu wedi ei ganfod ar eich peiriant. Gwiriwch fod Cerdyn "
-"Fideo/Teledu sy'n cael ei gynnal gan Linux wedi ei osod yn gywir.\n"
-"\n"
-"\n"
-"Cewch ymweld â'n cronfa ddata caledwedd yn:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Gyrwyr eraill"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "rhestr o yrrwr eraill ar gyfer eich cerdyn sain"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"dyma'r bws corfforol i'r ddyfais gael ei gysylltu iddo (e.e. PCI, USB,...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Dynodiad bws"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- dyfeisiau PCI ac USB : dyma restr gwerthwyr, dyfais, is werthwyr ac is "
-"ddyfais PCI/USB"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- dyfeisiau pci: dyma slot PCI, dyfais a gwaith y cerdyn\n"
-"- dyfeisiau ide: mae'r ddyfais un ai yn was neu feistr\n"
-"- dyfeisiau scsi: dynodiad dyfeisiau scsi a'r bws scsi"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "Maint y gyrrwr"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "nodweddion arbennig y gyrrwr (llosgi neu gynnal DVD)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "mae'r maes yn disgrifio'r ddyfais"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Hen ffeil dyfais"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "hen enw dyfais sefydlog yn cael ei ddefnyddio mewn pecyn dev"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Dyfais devfs newydd"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "enw dyfais ddeinamig yn cael ei gynhyrchu gan incore kernel devfs"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Modiwl"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "y modiwl o'r cnewyllyn GNU/Linux sy'n trin y ddyfais honno"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "Rhaniadau estynedig"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "y nifer o raniadau estynedig"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Geometreg"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr "Geometreg silindr/pen/adrannau disg"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "Rheolwr disg"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr "y rheolwr disg ar ochr y gwesteiwr"
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "dosbarth y ddyfais caledwedd"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Model"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "Model disg caled"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "porth argraffydd rhwydwaith"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "Prif raniadau"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "y nifer o brif raniadau"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "enw gwerthwr y ddyfais"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "Bus PCI #"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "y bws PCI y mae'r ddyfais wedi ei blygio iddo"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "dyfais PCI #"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "rhif dyfais PCI"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr "swyddogaeth PCI #"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr "rhif swyddogaeth PCI"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "Enw'r gwerthwr"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr "dyma enw rhifol safonol y gwerthwr"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "Enw'r ddyfais"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "dyma ddynodydd rhifol y ddyfais"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr "Enw'r is werthwr"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr "dyma enw rhifol llai'r gwerthwr"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr "Enw'r is ddyfais"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "dyma ddynodwr rhifol llai'r ddyfais"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "Enw'r ddyfais USB"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"mae angen i'r cnewyllyn GNU/Linux gyflawni cyfrif cylch wrth gychwyn i "
-"gychwyn y cyfrif amser. Mae'r canlyniad yn cael ei gadw fel bogomips fel "
-"ffordd o \"feincnod\" y cpu."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Maint storfa"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "maint storfa cpu (ail lefel)"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "a oes gan y cpu y Cyrix 6x86 Coma bug"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Teulu cpuid"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "teulu'r cpu (ee 6 am ddosbarth i686)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Lefel cpuid"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "lefel gwybodaeth i'w gael drwy gyfarwyddid cpuid"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Amledd (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"amledd y cpu mewn MHz (y nifer o gyfarwyddiadau'r eiliad mae'r cpu'n gallu "
-"eu trin)"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Baneri"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Baneri cpu'n cael eu dangos gan y cnewyllyn"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Gwall Fdiv"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"Mae gan brosesyddion Pentium cynnar wall yn eu prosesydd pwynt arnofio nad "
-"yw'n ymgyrraedd â'r cywirdeb angenrheidiol wrth berfformio Floating point "
-"DIVision (FDIV)"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "Yw'r FPU yn bresennol"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "mae iawn yn golygu fod gan y cyd-brosesydd rhifyddegol"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "P'un ai oes gan y FPU fector irq"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"mae iawn yn golygu fod gan y cyd-brosesydd fector eithriad yn gysylltiedig"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "Gwall F00f"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"roedd rhai Pentium cynnar yn wallus ac yn rhewi wrth ddadgodio F00F bytecode"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "Gwall halt"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Nid yw rhai prosesyddion i486DX-100 cynnar yn gallu dychwelyd i'w cyflwr "
-"gweithredu a'r ôl defnyddio \"halt\""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "Is gynnyrch y cpu"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "cynnyrch y cpu (ee 8 am Pentiumlll,...]"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Enw'r model"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "enw swyddogol gwerthwr y cpu"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "enw'r prosesydd"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "Dynodiad Prosesydd"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "rhif y prosesydd"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Stepio model"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "graddiad y cpu (cynhyrchu rhif is-fodel)"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "enw gwerthwr y prosesydd"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Diogelwch ysgrifennu"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"mae'r faner WP yng nghofrestr CRO y cpu yn gorfodi diogelwch rhag ysgrifennu "
-"ar lefel cof tudalen, felly'n caniatáu'r prosesydd i atal mynediad i wirio "
-"cnewyllyn i gof y defnyddiwr (hy diogelwch rhag gwall)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Fformatio disg meddal"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "fformatio disgiau meddal derbyniol i'r gyrrwr"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Sianel EIDE/SCSI"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr "Enw'r disg"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr "fel rheol rhif cyfresol y ddisg"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr "Rhif yr uned resymegol"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-"y rhif targed SCSI (LUN). Mae dyfeisiau SCSI sydd wedi eu cysylltu i "
-"westeiwr yn cael eu\n"
-"hadnabod yn unigryw drwy rif sianel, enw targed a rhif uned resymegol"
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "Maint gosod"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr "Maint gosod y banc cof"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr "Maint Galluogwyd"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr "Maint galluogi'r banc cof"
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "Math o ddyfais cof"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Cyflymder"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr "Cyflymder y banc cof"
-
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr "Cysylltiadau banc"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr "Dynodiad soced y banc cof"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "Ffeil dyfais"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-"y ffeil dyfais sy'n cael ei ddefnyddio i gyfathrebu â gyrrwr y cnewyllyn ar "
-"gyfer y llygoden"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr "Olwyn efelychwyd"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "p'un ai yw'r olwyn wedi ei efelychu ai peidio"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "y math o lygoden"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "enw llygoden"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Nifer o fotymau"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "nifer y botymau sydd gan y llygoden"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "y math o fws mae eich llygoden wedi cysylltu iddi"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr "Protocol llygoden defnyddir gan y X11"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-"y protocol mae'r bwrdd gwaith graffigol yn ei ddefnyddio gyda'r llygoden"
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Dynodiad"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Cysylltiad"
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr "Perfformiadau"
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "Gwallau"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr "FPU (Cyd-brosesydd Rhifol)"
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Rhaniadau"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Nodweddion"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Dewisiadau"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Cymorth"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Awtoganfod_argraffydd"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Awtoganfod_modem"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Awtoganfod_gyrrwr jaz"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr "/Awtoganfod gyrrwyr _zip paralel"
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr "/_Llwytho'r rhestr caledwedd"
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Gadael"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Disgrifiad meysydd"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Cymorth Harddrake"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Unwaith i chi ddewis dyfais, gallwch weld esboniad mewn meysydd yn y ffrâm "
-"dde [\"Gwybodaeth\"]"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Adrodd ar Wallau"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Ynghylch..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Ynghylch Harddrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Dyma HardDrake, offeryn ffurfweddu caledwedd %s.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;tvignaud"
-"\\@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "Harddrake2"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Caledwedd canfuwyd"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Modd ffurfweddu"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Rhedeg offeryn ffurfweddu"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "anhysbys"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Anhysbys"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Amryw."
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Cliciwch ar ddyfais yn y goeden chwith i gael at ei wybodaeth"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "eilradd"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "cynradd"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "llosgwr"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr "Llwytho'r rhestr caledwedd"
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Cyfrif:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Cyfrinair:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Enw Gwesteiwr:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Dewiswch gynllun allweddell"
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Ydych chi eisiau i'r Backspace ddychwelyd Dileu yn y consol?"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Mae'r newid wedi ei gyflawni, ond i fod yn effeithiol mae'n rhaid i chi "
-"allgofnodi"
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Cofnodion Offer Mandriva Linux"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Dangos ar y diwrnod penodol yn unig"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Ffeil/_Newydd"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Ffeil/_Agor"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Ffeil/_Cadw"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Ffeil/Cadw _fel"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Ffeil/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Dewisiadau/Test"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Cymorth/_Ynghylch..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Dilysu"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "Defnyddiwr"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "Negeseuon"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Syslog"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "chwilio"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Offeryn i fonitro eich cofnodion"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Gosodiadau"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "Cydweddu"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "ond heb fod yn cydweddu"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Dewis ffeil"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Calendr"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Cynnwys y ffeil"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "Rhybudd e-bost"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "Mae'r dewin byw wedi methu'n annisgwyl:"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "arhoswch, dosbarthu ffeil: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Gweinydd Gwe Fyd Eang Apache"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Datrysydd Enw Parth"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "Gweinydd Ftp"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Gweinydd E-bost Postfix"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Gweinydd Samba"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Gwasanaethau Webmin"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Gwasanaeth Xinetd"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "Ffurfweddu'r system argraffu CUPS"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "Atal y system rhybudd e-bost"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Ffurfweddiad rhybudd e-bost"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Croeso i'r gwasanaeth ffurfweddu e-bost\n"
-"\n"
-"Yma bydd modd i chi osod y system rhybuddio.\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Beth hoffech chi ei wneud?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Gosodiad gwasanaeth"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "Byddwch yn derbyn rhybudd os na fydd un o'r gwasanaethu hyn yn rhedeg"
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "Gosodiad llwyth"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Byddwch yn derbyn rhybudd os yw'r llwyth yn uwch na'r gwerth hwn"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Llwyth"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "Ffurfweddiad rhybudd"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Rhowch eich cyfeiriad e-bost islaw"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr "rhowch enw (neu'r IP) y gweinydd SMTP rydych am ei ddefnyddio."
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "Mae'r dewin wedi ffurfweddu'r rhybudd e-bost yn llwyddiannus."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "Mae'r dewin wedi ffurfweddu'r rhybudd e-bost yn llwyddiannus."
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Cadw fel..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Dewiswch fath eich llygoden"
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Efelychu'r trydydd botwm?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Prawf llygoden"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Profwch y llygoden"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "Mae'r rhwydwaith ar gael ar ryngwyneb %s"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr ""
-"Nid yw'r rhwydwaith ar gael ar ryngwyneb %s. Cliciwch ar \"Ffurfweddu "
-"Rhwydwaith\""
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Cysylltu %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Datgysylltu %s"
-
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr "Monitro'r Rhwydwaith"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Ffurfweddu rhwydwaith"
-
-#: standalone/net_applet:73
-#, c-format
-msgid "Watched interface"
-msgstr "Rhyngwyneb gwyliwr"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Proffeiliau"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "Cymorth Ar-lein"
-
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr "Canfod mewnwthiad rhyngweithiol"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Cychwyn wrth gychwyn"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr "Gwnaed ymgais i ymosod ar borth gan %s."
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "Mae gwasanaeth %s wedi derbyn ymosodiad gan %s."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr "Gwnaed ymgais i agor cyfrinair gan %s"
-
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Mur Cadarn Rhyngweithiol: canfod ymwthiad"
-
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Hoffech chi wahardd yr ymosodwr?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr "Rhestr gwahardd (peidiwch gofyn eto)"
-
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr "Manylion yr ymosodiad"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr "Amser yr ymosodiad: %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Rhyngwynebau rhwydwaith: %s"
-
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr "Math o ymosodiad:  %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protocol: %s"
-
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr "Cyfeiriad IP yr ymosodwr: %s"
-
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr "Enw gwesteiwr yr ymosodwr: %s"
-
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr "Ymosodwyd ar wasanaeth: %s"
-
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr "Ymosodwyd ar borth: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr "Math o ymosodiad ICMP: %s"
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Monitro'r Rhwydwaith"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "Ystadegau eang"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "Ebrwydd"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Cyfartaledd"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"Cyflymder\n"
-"anfon:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"Cyflymder\n"
-"derbyn:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"Amser\n"
-"cysylltiad:"
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr "Defnyddio'r un raddfa ar gyfer derbyniwyd a throsglwyddo"
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Arhoswch, profi eich cysylltiad..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "Datgysylltu o'r Rhyngrwyd"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "Cysylltu â'r Rhyngrwyd"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Methodd datgysylltu o'r Rhyngrwyd."
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Datgysylltu o'r Rhyngrwyd wedi ei gwblhau"
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Cysylltiad wedi ei gwblhau"
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Methodd y cysylltiad.\n"
-"Gwiriwch eich ffurfweddiad yng Nghanolfan Rheoli Mandriva Linux."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Ffurfweddiad lliw"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "anfonwyd: "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "derbyniwyd:"
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "cyfartaledd"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Mesur lleol"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Rhybudd, mae cysylltiad arall gyda'r rhyngrwyd wedi ei ganfod, efallai'n "
-"defnyddio eich rhwydwaith."
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "Dim cysylltiad â'r rhyngrwyd wedi ei ffurfweddu"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Darllen data am argraffyddion gosodedig..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "Offeryn Rheoli Argraffydd %s"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Gweithredoedd"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Ychwanegu Argraffydd"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Gosod fel _Rhagosodiad"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Golygu"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Dileu"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Modd Uwch"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Adnewyddu"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Ffurfweddu CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Chwilio:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Gosod Hidl"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "Def."
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Enw argraffydd"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Math o Gyswllt"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Enw Gweinydd"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Ychwanegu Argraffydd"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Ychwanegu argraffydd newydd i’r system"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Gosod fel rhagosodedig"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Gosod yr argraffydd fel y rhagosodedig"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Golygu'r argraffwyr hyn"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Dileu'r argraffydd hwn"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Adnewyddu'r rhestr"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "Ffurfweddu CUPS"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "Ffurfweddu'r system argraffu CUPS"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Galluogwyd"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Anablwyd"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Awduron:"
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "Rheoli Argraffydd %s"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"Mae angen gosod pecynnau SANE i ddefnydio sganwyr.\n"
-"\n"
-"Hoffech chi osod y pecynnau SANE?"
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Atal Scannerdrake."
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-"Methu gosod y pecynnau sydd eu hangen i osod sganiwr gyda Scannerdrake."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Ni fydd Scannerdrake yn cael ei gychwyn."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Chwilio am sganiwr wedi ei ffurfweddu..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Chwilio am sganiwr newydd..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "Ail gynhyrchu rhestr o sganwyr wedi eu ffurfweddu..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "Nid yw %s yn cael ei gynnal gan y fersiwn yma o %s."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Wedi canfod %s ar %s, ei ffurfweddi'n awtomatig?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"Nid yw %s yng nghronfa ddata sganwyr. Hoffech chi ei ffurfweddu â llaw?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Dewiswch fodel sganiwr"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Canfuwyd model: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Porth: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr "(HEB EI GYNNAL)"
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "Nid yw %s yn cael ei gynnal gan Linux."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "Peidio gosod ffeil cadarnwedd"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-"Mae'n bosib fod %s angen i'w gadarnwedd gael ei lwytho i fyny bob tro fydd "
-"yn cael ei gychwyn."
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "Os yw hyn yn wir, gallwch beri i hyn gael ei wneud yn awtomatig i chi."
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"I wneud felly, rhaid darparu'r ffeil cadarnwedd ar gyfer eich sganiwr fel "
-"bod modd ei osod."
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"Cewch hyd i'r ffeil ar y CD neu ddisg meddal sy'n dod gyda'r sganiwr, ar "
-"dudalen gwe'r gwneuthurwr, neu ar eich rhaniad Windows."
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Gosod ffeil cadarnwedd o"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Dewiswch ffeil cadarnwedd"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "Nid yw ffeil cadarnwedd %s yn bodoli neu nid yw'n ddarllenadwy!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-"Mae'n bosib fod angen i'ch sganiwr gael ei gadarnwedd ei ddiweddaru bob tro "
-"fydd yn cael ei gychwyn."
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-"I wneud hynny, rhaid darparu'r ffeil cadarnwedd ar gyfer eich sganiwr fel "
-"bod modd ei osod."
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-"Os ydych eisoes wedi gosod cadarnwedd eich sganiwr mae modd ei ddiweddaru "
-"drwy ddarparu'r ffeil newydd"
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "Gosod ffeil cadarnwedd ar gyfer"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "Dewis ffeil cadarnwedd ar gyfer %s"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Methu gosod ffeil cadarnwedd ar gyfer %s!"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "Mae'r ffeil cadarnwedd ar gyfer %s wedi ei osod yn llwyddiannus!"
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "Nid yw %s yn cael ei gynnal"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"Rhaid i %s gael ei ffurfweddu gan printerdrake.\n"
-"Gallwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli %s"
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Awtoganfod pyrth ar gael"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Dewiswch y ddyfais lle mae %s wedi ei gysylltu"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Sylwer: Nid oes modd awtoganfod pyrth paralel)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "dewis dyfais"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Chwilio am sganwyr..."
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "Gosod modiwlau'r cnewyllyn..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "Sylwch!"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-"Nid oes modd ffurfweddu %s yn awtomatig.\n"
-"\n"
-"\n"
-"Mae angen newidiadau gyda llaw. Golygwch y ffeil ffurfweddiad /etc/sane.d/%s."
-"conf. "
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-"Mae rhagor o wybodaeth ar dudalen llawlyfr y gyrrwr. Rhedwch y gorchymyn "
-"\"man sane-%s\" i'w ddarllen."
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Wedi hynny gallwch sganio dogfennau gan ddefnyddio \"XSane\" neu \"Kooka\" "
-"o'r ddewislen Aml-gyfrwng/Graffigau."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-"Mae eich %s wedi ei ffurfweddu, ond mae'n bosibl bod angen newidiadau llaw "
-"ychwanegol i'w gael i weithio."
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-"Nid yw'n ymddangos ar restr sganwyr wedi eu ffurfweddu ym mhrif ffenestr "
-"Scannerdrake neu nid yw'n gweithio'n iawn."
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "golygu'r ffeil ffurfweddu /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"Mae eich %s wedi ei ffurfweddu.\n"
-"Gallwch ddefnyddio \"XSane\" i sganio dogfennau o'r ddewislen rhaglenni Aml-"
-"gyfrwng/Graffigau."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Mae'r argraffyddion canlynol\n"
-"\n"
-"%s\n"
-"ar gael ar eich system.\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"Mae'r argraffydd canlynol\n"
-"\n"
-"%s\n"
-"ar gael ar eich system.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Does unrhyw sganiwr wedi ei ganfod ar gael ar eich cyfrifiadur.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Chwilio am sganwyr newydd"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Ychwanegu sganiwr gyda llaw"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Gosod/Diweddaru ffeiliau cadarnwedd"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Rhannu sganiwr"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Pob cyfrifiadur pell"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Y peiriant hwn"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Yma gallwch benderfynu a ddylai'r sganwyr sy'n gysylltiedig â'r cyfrifiadur "
-"hwn fod ar gael i gyfrifiaduron pell a pha rai."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Gallwch benderfynu a ddylai sganwyr ar gyfrifiadur pell fod ar gael ar gyfer "
-"y cyfrifiadur hwn."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Mae' sganwyr y cyfrifiadur hwn ar gael ar gyfer rhai eraill"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Rhannu sganwyr i westeiwyr:"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Defnyddio sganiwr ar gyfrifiaduron pell"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Defnyddio sganwyr ar westeiwyr:"
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Rhannu sganwyr lleol"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-"Dyma'r cyfrifiaduron a rhwydweithiau ddylai'r sganiwr lleol fod ar gael:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Ychwanegu gwesteiwr"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Golygu'r gwesteiwr"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Tynnu'r gwesteiwr"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Enw/cyfeiriad IP gwesteiwr"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Dewis y gwesteiwr ddylai'r sganiwr lleol fod ar gael iddynt:"
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Rhowch enw'r gwesteiwr neu'r cyfeiriad IP.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Mae'r gwesteiwr ar y rhestr yn barod, does dim modd ei ychwanegu.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Defnyddiwch o sganwyr pell"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Dyma'r cyfrifiaduron ddylai'r sganwyr fod ar gael:"
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"Mae angen gosod saned i rannu sganiwr(wyr) lleol.\n"
-"\n"
-"Hoffech chi osod pecyn saned?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "Ni fydd eich sganiwr(sganwyr) ar gael ar y rhwydwaith"
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Cafodd rhai dyfeisiau yn nosbarth caledwedd\"%s\" eu tynnu:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr "- %s wedi ei dynnu\n"
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Ychwanegwyd rhai dyfeisiau: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- %s wedi ei ychwanegu\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Canfod caledwedd ar waith"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr "Newid caledwedd yn nosbarth \"%s\" (%s eiliad am ateb)"
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Ydych chi redeg yr offeryn ffurfweddu priodol?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Iaith"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Trwydded"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Ffurfweddu llygoden"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Canfod disg caled"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Dewis dosbarth gosod"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Dewis eich bysellfwrdd"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Creu rhaniadau"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Fformatio rhaniadau"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Dewis pecynnau i'w gosod"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Gosod y system"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "Cyfrinair y gweinyddwr"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Ychwanegu defnyddiwr"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Ffurfweddu rhwydwaith"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Gosod cychwynnwr"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Ffurfweddu X"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Ffurfweddu gwasanaethau"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Diweddaru"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Gorffen"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Ydi hyn yn gywir?"
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "Heb ddewis ffeil"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Rydych wedi dewis ffeil, nid cyfeiriadur"
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Rydych wedi dewis cyfeiriadur, nid ffeil"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "Dim cyfeiriadur o'r fath ar gael"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "Dim ffeil o'r fath ar gael"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Estyn y goeden"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Cau'r goeden"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Newid rhwng gwastad a'r grŵp wedi ei ddidoli"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"Nid yw %s wedi ei osod\n"
-"Cliciwch \"Nesaf\" i osod neu \"Diddymu\" i adael"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Methodd y gosod"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "Enw cyfrol resymegol: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Mae eich system yn brin o adnoddau. Efallai y cewch anawsterau wrth osod\n"
-#~ "Mandriva Linux. Os bydd hynny'n digwydd, gallwch geisio gwneud gosodiad\n"
-#~ "testunol. I wneud hynny, gwasgwch F1 wrth gychwyn ar y CD-ROM ac yna rhoi "
-#~ "'text'."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Cysylltu â safle Mandriva Linux i estyn rhestr o'r drychau sydd ar gael"
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Gosodiad %s Mandriva Linux"
-
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "RHYBUDD: Cafodd y ddyfais hon ei ffurfweddu o'r blaen i gysylltu â'r "
-#~ "Rhyngrwyd.\n"
-#~ "Bydd newid y meysydd islaw'n newid y ffurfweddiad.\n"
-#~ "Ydych am ail-ffurfweddu’r ddyfais?"
-
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - Creu disgiau meddal/CD cychwyn rhwydwaith (etherboot):\n"
-#~ "        \t\tBydd peiriannau di-ddisg angen delwedd ROM ar y NIC , disg "
-#~ "meddal cychwyn\n"
-#~ "        \t\tneu CD i gychwyn.  Bydd drakTermServ yn cynorthwyo i "
-#~ "gynhyrchu'r \n"
-#~ "        \t\tdelweddau hyn, yn seiliedig ar y NIC yn y peiriant cleient.\n"
-#~ "        \t\t\n"
-#~ "        \t\tEnghraifft o greu gyda llaw, disg meddal cychwyn ar gyfer "
-#~ "3Com 3c509 :\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Pwll Cyfeiriad IP dynameg"
-
-#~ msgid "hd"
-#~ msgstr "hd"
-
-#~ msgid "tape"
-#~ msgstr "tâp"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "Mae safle pell WebDAV eisoes wedi cydamseru!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "Methodd trosglwyddiad WebDAV!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr ""
-#~ "Wedi mynd tu hwnt i'r cwota wrth gefn\n"
-#~ "%d Mb wedi ei ddefnyddio vs %d Mb ar gael."
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Rhowch y maint mwyaf\n"
-#~ " i'w ganiatáu ar gyfer Drakbackup (MB)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-Rhwydwaith drwy webday.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Defnyddio cychwyn graffigol"
-
-#~ msgid "first step creation"
-#~ msgstr "creu'r cam cyntaf"
-
-#~ msgid "choose image file"
-#~ msgstr "dewis ffeil delwedd"
-
-#~ msgid "Browse"
-#~ msgstr "Pori"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Ffurfweddu llun croeso cychwyn"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "lliw'r bar cynnydd"
-
-#~ msgid "Preview"
-#~ msgstr "rhagolwg"
-
-#~ msgid "Choose color"
-#~ msgstr "dewis lliw"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "Gwneud neges y cnewyllyn yn dawel drwy ragosodiad"
-
-#~ msgid "Notice"
-#~ msgstr "Nodyn"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "Does gan y thema ddim croeso cychwyn yn %s !"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Rhaid dewis ffeil delwedd yn gyntaf!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Cynhyrchu rhagolwg..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "%s Rhagolwg Croeso Cychwyn (%s)"
-
-#~ msgid ""
-#~ "The image \"%s\" cannot be load due to the following issue:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-#~ msgstr ""
-#~ "Methu llwytho delwedd \"%s\" oherwydd y mater canlynol:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Does dim disg meddal ar gael"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Rhowch y disg meddal Diweddaru Modiwlau yn nisg %s"
-
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Tifinagh (+lladin/arabeg)"
-
-#~ msgid "No network card"
-#~ msgstr "Dim cerdyn rhwydwaith"
-
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "Defnyddiwch yrrwr presennol (%s)"
-
-#~ msgid "Use Wi-Fi Protected Access (WPA)"
-#~ msgstr "Defnyddio Wi-Fi Protected Access (WPA)"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "Heb ddewis ffontiau"
-
-#~ msgid "Save and close"
-#~ msgstr "Cadw a chau"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "Dim porwr ar gael! Gosodwch un"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "Does dim porwr ar eich cyfrifiadur. Rhaid gosod un os ydych am "
-#~ "archwilio'r system gymorth."
-
-#, fuzzy
-#~ msgid "Active Firewall : intrusion detected"
-#~ msgstr "Wedi canfod ffurfweddiad mur gwarchod!"
-
-#, fuzzy
-#~ msgid "Do you want to blacklist the attacker ?"
-#~ msgstr "Ydych chi eisiau troi Bysellau Gludiog ymlaen?"
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Rhowch ddisg meddal yn y gyrrwr\n"
-#~ "Mi fydd yr holl wybodaeth ar y disg meddal yma yn cael ei golli"
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "Rhowch ddisg meddal wedi ei fformatio i FAT yng ngyrrwr %s"
-
-#~ msgid "This floppy is not FAT formatted"
-#~ msgstr "Nid yw 'r disg meddal hwn wedi ei fformatio i FAT"
-
-#~ msgid ""
-#~ "To use this saved packages selection, boot installation with ``linux "
-#~ "defcfg=floppy''"
-#~ msgstr ""
-#~ "I ddefnyddio'r dewis o becynnau wedi eu cadw, cychwynnwch y gosodiad gyda "
-#~ "``linux defcfg=floppy''"
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Llwytho/Cadw ar ddisg  meddal"
-
-#~ msgid ""
-#~ "Please choose load or save package selection on floppy.\n"
-#~ "The format is the same as auto_install generated floppies."
-#~ msgstr ""
-#~ "Dewiswch lwytho neu ddewis cadw pecyn ar ddisg meddal.\n"
-#~ "Mae'r fformat yr un ar ddisgiau meddal wedi eu cynhyrchu drwy "
-#~ "auto_install."
-
-#~ msgid "Load from floppy"
-#~ msgstr "Llwytho o ddisg meddal"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Cadw ar ddisg meddal"
-
-#~ msgid "Package selection"
-#~ msgstr "Dewis pecynnau"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "Llwytho o ddisg meddal"
-
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Rhowch ddisg meddal yn cynnwys dewis pecynnau yn y peiriant"
-
-#~ msgid "multi-function device on parallel port #%s"
-#~ msgstr "dyfais amlbwrpas ar borth paralel #\"%s"
-
-#~ msgid "multi-function device on a parallel port"
-#~ msgstr "dyfais amlbwrpas ar borth paralel"
-
-#~ msgid "multi-function device on USB"
-#~ msgstr "dyfais amlbwrpas ar USB"
-
-#~ msgid "multi-function device on HP JetDirect"
-#~ msgstr "dyfais amlbwrpas ar HP JetDirect"
-
-#~ msgid "multi-function device"
-#~ msgstr "dyfais amlbwrpas"
-
-#~ msgid "printing to %s"
-#~ msgstr "argraffu i %s"
-
-#~ msgid "using command %s"
-#~ msgstr "defnyddio gorchymyn %s"
-
-#~ msgid "Application:"
-#~ msgstr "Rhaglen"
-
-#~ msgid "Release: "
-#~ msgstr "Ryddhad"
-
-#~ msgid "Summary: "
-#~ msgstr "Crynodeb:"
-
-#~ msgid "Bug Description/System Information"
-#~ msgstr "Disgrifiad Gwall/Gwybodaeth am y System"
-
-#~ msgid "YOUR TEXT HERE"
-#~ msgstr "EICH TESTUN YMA"
-
-#~ msgid "Submit kernel version"
-#~ msgstr "Cyflwyno fersiwn y cnewyllyn"
-
-#~ msgid "Submit cpuinfo"
-#~ msgstr "Cyflwyno cpuinfo"
-
-#~ msgid "Submit lspci"
-#~ msgstr "Cyflwyno Ispci"
-
-#~ msgid "NOT FOUND"
-#~ msgstr "HEB GANFOD"
-
-#~ msgid "connecting to %s..."
-#~ msgstr "cysylltu â %s..."
-
-#~ msgid "Please enter a package name."
-#~ msgstr "Rhowch enw'r pecyn."
-
-#~ msgid "Please enter summary text."
-#~ msgstr "Rhowch destun crynodeb yma."
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
deleted file mode 100644
index a9ee98c63..000000000
--- a/perl-install/share/po/da.po
+++ /dev/null
@@ -1,30175 +0,0 @@
-# translation of da1.po to Danish
-# translation of da.po to Danish
-# translation of DrakX-da.po to Danish
-# Copyright (C) 2000,2003, 2004, 2005 Free Software Foundation, Inc.
-# Troels Liebe Bentsen <tlb@iname.com> 2000.
-# Keld Simonsen <keld@dkuug.dk>, 2000-2003, 2004, 2005.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: da\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-04-29 08:32+0200\n"
-"Last-Translator: Keld Simonsen <keld@dkuug.dk>\n"
-"Language-Team: Danish <dansk@klid.dk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.0.2\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Hvilken USB-nøgle ønsker du at formatere?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-"Du er ved at formatere en USB-enhed '%s'. Dette vil slette alle data på "
-"den.\n"
-"Vær sikker på at den valgte enhed er den USB-nøgle du ønsker at formatere. \n"
-"Vi tilråder at du tager alle andre USB-lagerenheder ud af maskinen mens du "
-"laver denne operation."
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "Nøgle er ikke skrivbar"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-"USB-nøglen ser ud til at have skrivebeskyttelse aktiveret. Tag den ud, \n"
-"fjern skrivebeskyttelsen, og sæt den ind igen,"
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Prøv igen"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "Fortsæt uden USB-nøgle"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-"USB-nøglen ser ud til at have skrivebeskyttelse aktiveret, men vi kan ikke\n"
-"tage den ud på en sikker måde nu.\n"
-"\n"
-"\n"
-"Klik på knappen for at genstarte maskinen, tag den ud, fjern "
-"skrivebeskyttelsen,\n"
-"sæt nøglen ind igen, og start Mandriva Move igen."
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Genstart"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Din USB-nøgle har ikke nogen gyldige Windows FAT partitioner.\n"
-"Vi har brug for et for at kunne fortsætte (iøvrigt er det mere almindeligt, "
-"så \n"
-"du vil kunne flytte og få fat på dine filer fra maskiner der kører "
-"Windows).\n"
-"Indsæt venligst en USB-nøgle med en Windows-partition i stedet.\n"
-"\n"
-"\n"
-"Du kan også fortsætte uden en USB-nøgle - du vil så stadig\n"
-"kunne bruge Mandriva Move som et normalt levende Mandriva \n"
-"operativsystem."
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Vi fandt ikke nogen USB-nøgle på dit system. Hvis du\n"
-"indsætter en USB-nøgle nu, vil Mandriva Move have mulighed\n"
-"for automatisk at gemme dataene fra dit hjemmekatalog og systemets\n"
-"konfiguration, for den næste opstart af denne eller en anden maskine.\n"
-"Bemærk: Hvis du indsætter en nøgle nu skal du vente nogen sekunder\n"
-"før du prøver at finde den igen.\n"
-"\n"
-"\n"
-"Du kan også fortsætte uden en USB-nøgle - du vil så stadig\n"
-"kunne bruge Mandriva Move som et normalt levende Mandriva \n"
-"operativsystem."
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "Behøver en nøgle for at gemme dine data"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "Søg igen efter USB-nøgle"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "Indstiller USB-nøgle"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "Vent venligst, opsætter systemkonfigurationsfiler på USB-nøgle..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-"Indtast dine brugeroplysninger, adgangskode vil blive brugt til pauseskærm"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Auto-konfiguration"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Vent venligst, finder og konfigurerer enheder..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Fejl"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Der opstod en fejl, men jeg ved ikke hvordan den kan håndteres på en\n"
-"pæn måde.\n"
-"Fortsæt på eget ansvar!"
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Der er opstået en fejl"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-"Der skete en fejl:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"Dette kan komme fra beskadigede konfigurationsfiler\n"
-"på USB-nøglen, hvis det er tilfældet vil fjernelse af filerne og dernæst\n"
-"genstarte Mandriva Move ordne problemet. Klik på den\n"
-"tilsvarende knap for at gøre dette.\n"
-"\n"
-"\n"
-"Du kan også genstarte og fjerne USB-nøglen, eller\n"
-"undersøge dens indhold under et andet operativsystem, eller endog have\n"
-"et kig på logfiler i konsol nummer 3 og 4 for at forsøge at finde ud af\n"
-"hvad der sker."
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "Fjern systemkonfigurationsfiler"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "Genstart simpelthen"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "Du kan kun køre uden cdrom-understøttelse"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Dræb disse programmer"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "Ingen cdrom-understøttelse"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Læs omhyggeligt!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"Du kan ikke bruge en anden CDROM, når de følgende programmer kører:\n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "Kopierer til hukommelse for at tillade fjernelse af cdrommen"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kb"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kb"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 Mb"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 Mb"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 Mb"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 Mb"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 Mb"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 Mb"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 Mb eller mere"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X-server"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Vælg en X-server"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Flerskærms-konfiguration"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Dit system understøtter konfiguration af flere skærme\n"
-"Hvad vil du gøre?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Kan ikke installere Xorg-pakke: %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Vælg hukommelsesmængde for dit grafikkort"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Xorg konfiguration"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Hvilken konfiguration af Xorg ønsker du?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigurér alle skærme uafhængigt"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Brug Xinerama-udvidelse"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigurér kun kort \"%s\"%s"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s med 3D hardware acceleration"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr ""
-"Dit kort kan have 3D hardware accelerations-understøttelse med Xorg %s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s med EKSPERMENTAL 3d hardware acceleration"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Dit kort kan have 3D acceleration understøttelse, men kun med Xorg %s,\n"
-"VIGTIGT: Dette er eksperimentelt og kan få din maskine til at låse eller gå "
-"ned."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Tilpasset"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Afslut"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Grafikkort"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Skærm"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Opløsning"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Afprøv"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Valg"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr "Din Xorg-konfigurationsfil er i stykker, vi vil ignorere den."
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Behold ændringer?\n"
-"Nuværende konfiguration er:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Vælg en skærmtype for hoved nummer %d"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Vælg en skærmtype"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Standard"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Producent"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-"Undersøgning for Plug'n Play mislykkedes. Vælg venligst den rigtige skærm"
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"De to kritiske parametre er den lodrette frekvens, som angiver hvor mange "
-"gange (per sekund) hele skærmbilledet bliver genopfrisket, og (vigtigst af "
-"alt) den vandrette frekvens, som angiver antallet af vandrette linier der "
-"kan tegnes på skærmen hvert sekund.\n"
-"\n"
-"Det er MEGET VIGTIGT at du ikke angiver en skærmtype med "
-"opdateringsfrekvenser, der er større end din skærms formåen: du risikerer at "
-"ødelægge din skærm.\n"
-"Hvis du er i tvivl, bør du vælge en opsætning, som du med SIKKERHED ved\n"
-"at din skærm kan klare."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Vandret opdateringsfrekvens"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Lodret opdateringsfrekvens"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 farver (8 bit)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 tusinde farver (15 bit)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 tusinde farver (16 bit)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 millioner (24 bit)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Opløsninger"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Andet"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Vælg opløsning og farvedybde"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafikkort: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "O.k."
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Annullér"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Hjælp"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Test konfigurationen"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Ønsker du at afprøve konfigurationen?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Advarsel: afprøvning af dette grafikkort kan få din maskine til at fryse"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"En fejl indtraf:\n"
-"%s\n"
-"Prøv at ændre nogen parametre"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Forsvinder om %d sekunder"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Er dette den korrekte indstilling?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastatur-type: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muse-type: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muse-enhed: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Skærm: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Skærms vandrette frekvens: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Skærms lodrette frekvens: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafikkort: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafik-hukommelse: %s kb\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farvedybde: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Opløsninger %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg driver: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Start X ved systemstart"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Jeg kan sætte din maskine op til automatisk at starte X ved\n"
-"opstart. Ønsker du at starte X hver gang du genstarter?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Grafikkortet ser ud til at have en TV-UD-forbindelse.\n"
-"Den kan konfigureres så den fungerer med billedbuffer\n"
-"\n"
-"Til dette skal du tilslutte grafikkortet til tv'et inden du starter "
-"maskinen.\n"
-"Vælg dernæst indgangen \"TVout\" i starthåntereren.\n"
-"\n"
-"Har du denne funktion?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Hvilken standard bruger dit tv?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr "andet"
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Vent venligst"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Installation af systemopstarteren er i gang"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-"LILO ønsker at tildele en ny Volumen-ID til drev %s. Ændring af\n"
-"Volumen-ID på en Windows NT, 2000 eller XP opstartsdisk er dog en fatal "
-"Windows fejl.\n"
-"Denne advarsel gælder ikke for Windows 95 eller 98, eller for NT-datadiske.\n"
-"\n"
-"Tildel en ny Volumen-ID?"
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Installation af opstarter mislykkedes. Den følgende fejl opstod:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Du behøver måske at ændre din Åben Firmware opstartsenhed for  at slå "
-"systemstarteren til. Hvis du ikke ser systemstarter-beskeden ved genstart, "
-"så hold Command-Option-O-F nede og indtast:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Skriv så: shut-down\n"
-"Ved næste opstart burde du se systemstarteren."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Du besluttede at installere opstartsindlæseren på en partition.\n"
-"Dette indikerer at du allerede har en opstartsindlæser på disken som du "
-"starter op fra (fx System Commander).\n"
-"\n"
-"Hvilket drev starter du op fra?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Første sektor på disken (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Første sektor af rodpartitionen"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "På diskette"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Spring over"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub-installering"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Hvor vil du placere opstartsprogrammet?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguration af opstartsudseende"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Systemopstarterens hovedindstillinger"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Angiv RAM-størrelse i Mb"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Indstillingen ``Begræns kommandolinie-indstillinger'' er intet værd uden\n"
-"en adgangskode"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Adgangskoderne stemmer ikke overens"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Prøv igen"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Systemopstarter der skal bruges"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Opstartsenhed"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Ventetid før opstart af forvalgt styresystem"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Aktivér ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "Gennemtving ingen APIC"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "Gennemtving ingen lokal APIC"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Adgangskode"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Adgangskode (igen)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Begræns kommandolinie-indstillinger"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "begræns"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Rens /tmp ved hver systemopstart"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Præcis RAM-mængde, hvis påkrævet (fandt %d Mb)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Init-besked"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Åben firmwareforsinkelse"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Ventetid før kerneopstart"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Skal det være muligt at starte fra CD?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Skal det være muligt at starte fra OF?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "Forvalgt styresystem?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Billede"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Rod"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Vedhæft"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Videoindstilling"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "Netværksprofil"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Mærkat"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Standard"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-størrelse"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "Ingen video"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Tom mærkat er ikke tilladt"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Du skal angive en kerne-fil"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Du skal angive en root-partition"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Denne mærkat er allerede brugt"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Hvilken type ønsker du at tilføje"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Andet styresystem (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Andet styresystem (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Andet styresystem (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Her er følgende typer indgange.\n"
-"Du kan tilføje flere eller ændre de eksisterende."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "adgang til X-programmer"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "adgang til rpm-værktøjer"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "tillad \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "adgang til administrative filer"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "adgang til netværksværktøjer"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "adgang til oversættelsesværktøjer"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(har allerede tilføjet %s)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Adgangskoden er for simpel"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Indtast et brugernavn"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Brugernavnet må kun indeholde små bogstaver, tal, `-' og `_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Dette brugernavn er for langt"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Dette brugernavn eksisterer allerede"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Tilføj bruger"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Indtast en bruger\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Færdig"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Acceptér bruger"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Rigtige navn"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Logindnavn"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Skal"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Ikon"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Autologin"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Jeg kan sætte din maskine op til automatisk at logge en bestemt bruger på."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Ønsker du at bruge denne facilitet?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Ja"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Nej"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Vælg den forvalgte bruger:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Vælg den vindueshåndtering du ønsker at benytte:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Vælg det sprog, der skal bruges."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "Sprogvalg"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Du kan vælge andre sprog der vil være tilgængelige efter installationen"
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Brug ISO 10646 som standard"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Alle sprog"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Land / Region"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Vælg dit land."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Her er den komplette liste over tilgængelige lande"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "Andre lande"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Avanceret"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "Indtastningsmetode:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Ingen"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Ingen fildeling"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Tillad alle brugere"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Ønsker du at tillade brugere at eksportere nogle kataloger i deres "
-"hjemmekatalog?\n"
-"Tilladelse af dette vil sætte brugere i stand til simpelthen at klikke på "
-"'Fildeling' i konqueror og nautilus.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-"NFS: det traditionlle Unix fildelingssystem, med mindre funktionalitet på "
-"Mac og Windows."
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-"SMB: et fildelingssystem brugt på Windows, Mac OS X og mange moderne Linux-"
-"systemer."
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr "Du kan eksportere med NFS eller SMB. Hvilken vil du bruge"
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Start userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Luk"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Deling per bruger bruger gruppen 'fileshare'. \n"
-"Du kan bruge userdrake til at tilføje en bruger til denne gruppe."
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Lokal fil"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr "Smart-kort"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Windows Domain"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr "Active Directory med SFU"
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr "Active Directory med Winbind"
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "Lokal fil:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-"Brug lokal for al autentificering og information, som bruger angiver i lokal "
-"fil"
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-"Fortæller din maskine at den skal bruge LDAP til nogen eller al "
-"autentifikation. LDAP sammenfatter bestemte informationstyper i din "
-"organization."
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-"Giver dig mulighed for at køre en gruppe af maskiner i det samme Network "
-"Information Service-domæne med en fælles adgangskode- og gruppe-fil."
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Windows Domain:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-"Winbind giver systemet mulighed for at modtage information og autentificere "
-"bruger i et Windows domæne."
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr "Active Directory med SFU:"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-"Kerberos er et sikkert system til at give netværksautentificeringstjenester."
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Active Directory med WInbind"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Autentificering LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP grundlæggende dn"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP-server"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "simpel"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr "sikkerhedsopsætning (SASL/Kerberos)"
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr "Autentifikation for Active Directory"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Domæne"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Server"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "LDAP-brugerdatabase"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr "Brug anonym BIND "
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr "LDAP-bruger som har tilladelse til at kigge i Active Directory"
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr "Adgangskode for bruger"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Krypteringsnøgle"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Autentificering NIS"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS-domæne"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS-server"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"For at dette kan virke på en W2K PDC skal du nok have administratoren til at "
-"køre: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add og genstarte serveren.\n"
-"Du skal også have et brugernavn og en adgangskode for at maskinen kan "
-"tilsluttes Windows(TM)-domænet.\n"
-"Hvis netværket ikke er aktiveret vil Drakx prøve at slutte til domænet efter "
-"trinnet med opsætning af netværk.\n"
-"Skulle denne opsætning fejle af nogen årsag, og domæneautentifikation ikke "
-"virke, så kør 'smbpasswd -j DOMAIN -U USER%%PASSWORD' med dit Windows(tm) "
-"domæne og administrators brugernavn/adgangskode, efter genstart af "
-"systemet.\n"
-"Kommandoen 'wbinfo -t' vil afprøve om dine hemmelige autentifikationsdata er "
-"i orden."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Autentifikations Windowsdomæne"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Brugernavn for domæneadministrator"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Adgangskode for domæneadministrator"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr "Brug ldmap for at lagre UID/SID"
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr "Standard ldmap "
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-"Sæt administrator (root)-adgangskode og netværksautentifikationsmetoder"
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr "Sæt administrator (root) adgangskode"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Autentifikationsmetode"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Ingen adgangskode"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Denne adgangskode er for nemt at gætte (det skal mindst være på %d tegn)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Identifikation"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "Kan ikke bruge rundkastning uden noget NIS-domæne"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Velkommen til styresystems-vaelgeren!\n"
-"\n"
-"Vaelg et styresystem i den ovenstaaende liste eller\n"
-"vent paa at starte standard-systemet.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO med grafisk menu"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO med tekstmenu"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "Ikke nok plads i /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Du kan ikke installere opstartsindlæseren på en %s-partition\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-"Din opstartsindlæserkonfiguration behøver at opdateres da rækkefølgen på "
-"dine partitioner er blevet ændret"
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"Opstartsindlæseren kan ikke blive installeret korrekt. Du skal lave "
-"nødopstart og vælge \"%s\""
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "Geninstallér systemopstarter"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "Kb"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "Mb"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "Gb"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "Tb"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutter"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 minut"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekunder"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu mangler"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "konsolhjælper mangler"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Østrig"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Australien"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Belgien"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brasilien"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Canada"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Schweiz"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Tjekkiet"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Tyskland"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Danmark"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estland"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Spanien"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finland"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Frankrig"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Grækenland"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Ungarn"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Irland"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Israel"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Italien"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Japan"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Holland"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Norge"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "New Zealand"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Polen"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rusland"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Sverige"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slovakiet"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Thailand"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Sydafrika"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "U.S.A."
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV er en protokol som lader dig montere en webserver katalog lokalt\n"
-"og behandle det som et lokalt filsystem (givet at webserveren er "
-"konfigureret\n"
-"som en WebDAV-server). Hvis du ønsker at tilføje WebDAV-monteringspunkter,\n"
-"så vælg \"Ny\"."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Ny"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Afmontér"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Montér"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Monteringssti"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Indtast LRL for WebDAV-serveren"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL'en skal begynde med http:// eller https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Server: "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Monteringssti: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Valg: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Lav gerne en sikkerhedkopi af dine data først"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Hvis du planlægger at bruge Yaboot, skal du huske at efterlade fri plads på\n"
-"begyndelsen af disken (2048 sektorer skulle være nok)"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Vejleder"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Vælg handling"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Du har én stor Microsoft Windows partition.\n"
-"Jeg foreslår at du først ændrer størrelsen på partitionen\n"
-"(klik på den, og klik herefter på \"Størrelsesændring\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Klik på en partition"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Detaljer"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Ingen diskdrev fundet"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Journaliserende FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Tom"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Filsystems-typer:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Benyt ``%s'' i stedet"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Opret"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Type"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Slet"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Benyt ``Afmontér'' først"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Vælg en ny partition"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Vælg en partition"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Afslut"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Fortryd"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Ekspert -> Normal"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Normal -> Ekspert"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Fortsæt alligevel?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-"Du bør formatere partition %s.\n"
-"Ellers vil der ikke blive skrevet noget indgangspunkt for monteringspunktet %"
-"s i fstab.\n"
-"Afslut alligevel?"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Afslut uden at gemme"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Afslut uden at skrive partitionstabellen?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ønsker du at gemme /etc/fstab-ændringerne?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Du skal genstarte for at aktivere ændringerne i partitionstabellen"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Slet alt"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Allokér automatisk"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Mere"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Drev-information"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle primære partitioner er brugt"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Kan ikke tilføje flere partitioner"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"For at du kan få flere partitioner, skal du slette én, så der kan oprettes "
-"en udvidet partition"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr "Ingen supermount"
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr "Supermount"
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr "Supermount undtagen for CDROM drev"
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Gem partitionstabel"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Genskaber partitionstabel"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Redder partitionstabel"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Genindlæs partitionstabel"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Automontering af flytbare medier"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Vælg fil"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Kopien af partitionstabellen har ikke samme størrelse\n"
-"Fortsæt alligevel?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Forsøger at redde partitionstabellen"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Detaljeret information"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Størrelsesændring"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Formatér"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Tilføj til RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Tilføj til LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Fjern fra RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Fjern fra LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Ændr RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Loopback anvendelse"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Opret en ny partition"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Startsektor: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Størrelse i Mb: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Filsystemstype: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Præference: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Logisk arkivnavn "
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"Du kan ikke oprette en ny partition\n"
-"(fordi du er oppe på det maksimale antal primære partitioner)\n"
-"Fjern først en primær partition og opret en udvidet partition."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Fjern loopback-filen?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter type-ændring af partition %s vil alle data på denne partition gå tabt"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Skift partitionstype"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Hvilket filsystem ønsker du at bruge?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Skifter fra ext2 til ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Hvor ønsker du at montere loopback-filen %s?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Hvor ønsker du at montere partitionen %s?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Kan ikke fjerne monteringssti, da denne partition bliver brugt til "
-"loopback.\n"
-"Fjern loopback først"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Hvor ønsker du at montere %s?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Ændrer størrelsen"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Udregner FAT-filsystemets grænser"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Størrelsen på denne partition kan ikke ændres"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Det bør laves en backup af alle data på denne partition"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter ændring af størrelsen af partition %s vil alle data på denne partition "
-"gå tabt"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Vælg den nye størrelse"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Ny størrelse i Mb: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"For at sikre dataintegritet efter ændring af størrelse på partitioner \n"
-"vil filsystemtjek blive kørt ved din næste opstart af Windows(TM)"
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Vælg en eksisterende RAID som skal udvides"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "ny"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Vælg en eksisterende LVM som skal udvides"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "LVM-navn?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Denne partition kan ikke bruges til loopback"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Loopback-filnavn: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Giv et filnavn"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Filen er allerede brugt af en anden loopback, vælg en anden fil"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Filen findes allerede. Skal den bruges?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Modulindstillinger"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Diverse"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "enhed"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "niveau"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "fragmentstørrelse i KiB"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Vær forsigtig: denne operation er farlig."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Hvilken slags partitionering?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Du skal genstarte maskinen for at aktivere ændringerne"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partitionstabellen for disk %s vil nu blive skrevet på disken!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Efter formatering af partitionen %s vil alle data på denne partition gå tabt"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Flyt filer til den nye partition"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Skjul filer"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Katalog %s indeholder allerede nogen data\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Flytter filer til den nye partition"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Kopierer %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Fjerner %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "partition %s er nu kendt som %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr "Partitioner er blevet omnummererede: "
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Enhed: "
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "Devfs-navn: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr "Etikette for drev: "
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-drevbogstav: %s (bare et gæt)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Type: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Navn: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Start: sektor %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Størrelse: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektorer"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Cylinder %d til %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Formateret\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Ikke formateret\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Monteret\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-fil(er):\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition som opstartes som standard\n"
-"    (gælder kun MS-DOS-opstart, ikke LILO)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Niveau %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Fragmentstørrelse %d KiB\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-diske %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback-filnavn: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Denne partition er nok\n"
-"en driver-partition. Du skal\n"
-"nok bare lade den være.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Denne specielle Bootstrap-\n"
-"partition er for at\n"
-"dual-boote dit system.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Skrivebeskyttet"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Størrelse: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Opbygning: %s cylindre, %s hoveder, %s sektorer\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Info: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-diske %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabel-type: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "på kanal %d id %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Krypteringsnøgle for filsystem"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Vælg din krypteringsnøgle for filsystemet"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Denne krypteringsnøgle er for nem at gætte (skal mindst være på %d tegn)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Krypteringsnøglerne stemmer ikke overens"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Krypteringsnøgle"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Krypteringsnøgle (igen)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Krypteringsalgoritme"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Skift type"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "Kan ikke logge ind med brugernavn %s (forkert adgangskode?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Domænegodkendelse påkrævet"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Hvilket brugernavn"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "En anden"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Indtast venligst dit brugernavn, din adgangskode og dit domænenavn for at få "
-"adgang til denne vært."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Brugernavn"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Søg efter servere"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Søg efter nye servere"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Pakken %s skal være installeret. Ønsker du at installere den?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Krævet pakke %s mangler"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Installerer pakker..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "Fjerner pakker..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Monterer partition %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "montering af partition %s i katalog %s mislykkedes"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Tjekker %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "fejl ved afmontering af %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Formaterer swap-partition %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formaterer partition %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Opretter og formaterer fil %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "Ved ikke hvordan man formaterer %s som type %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering af %s mislykkedes"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"Opdatér ikke inode tilgangstider på dette filsystem\n"
-"(fx for hurtigere adgang på nyhedskøen for at gøre nyhedsservere hurtigere)."
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"Kan kun monteres eksplicit (dvs.,\n"
-"'-a' tilvalget vil ikke bevirke, at filsystemet monteres)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr "Fortolk ikke tegn- eller blok-specialenheder på filsystemet."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"Tillad ikke udførelse af nogen som helst binære på det monterede \n"
-"filsystem. Denne mulighed kan være nyttig for en server som har \n"
-"filsystemer med binære for andre arkitekturer end dets egen."
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"Tillad ikke set-user-identifier eller set-group-identifier bit at tage "
-"effekt. \n"
-"(Dette ser sikkert ud, men er faktisk ret usikkert hvis du har suidperl(1) "
-"installeret)."
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Montér filsystem skrivebeskyttet"
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "Al I/O til filsystemet bør gøres synkront."
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"Tillad en almindelig bruger at montere filsystemet. Navnet på brugeren der \n"
-"monterede skrives til mtab så denne kan afmontere filsystemet igen. \n"
-"Denne mulighed implikerer valgmulighederne noexec, nosuid og nodev\n"
-"(med mindre tilsidesat af efterfølgende valgmuligheder, som i linjen\n"
-"user,ecex,dev,suid )."
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "Giv skriveadgang til almindelige brugere"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "Giv skriveadgang til almindelige brugere"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "Du kan ikke bruge JFS på partitioner mindre end 16Mb"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "Du kan ikke bruge ReiserFS på partitioner mindre end 32Mb"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "med /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "server"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Jeg kan ikke læse partitionstabellen for enhed %s, den er for ødelagt for "
-"mig :( Jeg kan forsøge fortsat at udblanke dårlige partitioner (ALLE DATA "
-"vil gå tabt!). Den anden mulighed er at forbyde DrakX at ændre "
-"partitionstabellen. (fejlen er %s)\n"
-"\n"
-"Er du indforstået med at ødelægge alle partitionerne?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Monteringsstier skal begynde med /"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Monteringspunkter bør kun indeholde bogstaver og tal"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Der findes allerede en partition med monterings-sti %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Du har valgt en programmeret RAID-partition som rod (/).\n"
-"Ingen systemopstarter kan håndtere dette uden en /boot partition.\n"
-"Vær sikker på at tilføje en /boot partition"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "Du kan ikke bruge et LVM logisk delarkiv for monteringspunkt %s"
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Du har valgt et LVM logisk drev som rod (/).\n"
-"Systemopstarteren kan ikke håndtere dette uden en /boot partition.\n"
-"Vær sikker på at tilføje en /boot partition"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-"Du kan muligvis ikke installere lilo (da lilo ikke kan håndtere en LV på "
-"flere PV'er)"
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dette katalog bør ligge på rod-filsystemet"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Du skal have et rigtigt filsystem (ext2/ext3, reiserfs, xfs eller jfs) til "
-"dette monteringspunkt\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "Du kan ikke bruge et krypteret filsystem for monteringspunkt %s"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ikke nok fri plads til at tildele nye partitioner automatisk"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Ingenting at lave"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Diskette"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Hard Disk"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "cd-rom"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD-brændere"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Bånd"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Videokort"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "TV-kort"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Andre multimedie-enheder"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Lydkort"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Webcam"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Processorer"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "ISDN-kort"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet-kort"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "ADSL-kort"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Hukommelse"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "AGP-kontrolkort"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Printer"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Joystick"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA-kontrolkort"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAID-kontrolkort"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA kontrolkort"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire-kontrolkort"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCIA-kontrolkort"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-kontrolkort"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "USB-kontrolkort"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "USB porte"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-kontrollers"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Broer og system-kontrolkort"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Mus"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Skanner"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Ukendt|andre"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu-nummer "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Vent venligst... Sætter konfigurationen i anvendelse"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Intet alternativ drivprogram"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Der findes intet kendt alternativt OSS/ALSA-drivprogram for lydkortet (%s) "
-"som i øjeblikket bruger '%s'"
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Lyd-konfiguration"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Her kan du vælge et alternativ drivprogram (enten OSS eller ALSA) for "
-"lydkortet (%s)"
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Dit kort bruger i øjeblikket %s\"%s\"-driveren (normal driver for dit kort "
-"er \"%s\")"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) var den første lyd-API. Det er en OS-uafhængig lyd-"
-"API (den er tilgængelig på de fleste Unix(tm)-systemer), men den er en meget "
-"basal og begrænset API.\n"
-"Ydermere genopfandt alle OSS-drivere hjulet.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) er en modulær arkitektur som\n"
-"understøtter en ganske lang række ISA-, USB- og PCI-kort.\n"
-"\n"
-"Den tilbyder også en meget højere API end OSS.\n"
-"\n"
-"For at bruge ALSA kan man enten bruge:\n"
-"- den gamle OSS-kompatibilitetes-api\n"
-"- den nye ALSA API som tilbyder mange forbedrede faciliteter men som kræver "
-"brug af ALSA-biblioteket.\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Drivprogram:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Problemløsning"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Advarsel"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"Den gamle \"%s\"-driver er sortlistet.\n"
-"\n"
-"Den er blevet rapporteret at lave fejl i kernen ved afslutningen.\n"
-"\n"
-"Den nye \"%s\"-driver vil først blive brugt ved næste systemopstart."
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Ingen open source driverrutine"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Der findes ingen fri driver for lydkortet (%s) men der er en leverandørejet "
-"driver på '%s'"
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Ingen kendt driverrutine"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Der findes intet kendt drivprogram for lydkortet (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Ukendt drivprogram"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Drivprogrammet %s for lydkortet er ikke listet"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Problemløsning omkring lyd"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Den klassiske metode for at fejlsøge lydopsætningten er at køre følgende\n"
-"kommandoer:\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" vil vise hvilken driver lydkortet bruger \n"
-"som standard\n"
-"- \"grep sound-slot /etc/modules.conf\" vil vise hvilken driver som er i "
-"brug\n"
-"\n"
-"- \"/sbin/lsmod\" lader dig se om denne driver er indlæst\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" og \"/sbin/chkconfig --list alsa\" vil\n"
-"vise om disse tjenester er sat op til at startes.\n"
-"\n"
-"- \"aumix -q\" vil vise om lyden er slukket ned eller ikke\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" vil vise hvilke programmer som bruger "
-"lydkortet\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Lad mig vælge hvilkensomhelst driver"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Vælger en vilkårlig driver"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Hvis du virkelig mener du véd hvilken driver der er den rette til dit kort "
-"kan du vælge én fra listen ovenfor.\n"
-"\n"
-"Den aktuelle driver for dit %s-lydkort er \"%s\" "
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Automatisk detektion"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Ukendt|generisk"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Ukendt|CPH05X (bt878) [mange leverandører]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Ukendt|CPH06X (bt878) [mange leverandører]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"For de fleste moderne tv-kort vil bttv-modulet fra GNU/Linux-kernen blot "
-"automatisk finde de rette parametre.\n"
-"Hvis dit kort ikke findes korrekt, kan du gennemtvinge den rette tuner og "
-"korttyper her. Bare vælg dit tv-korts parametre om nødvendigt"
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Kortmodel:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Tuner-type:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "Antal fangningsbuffere:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Antal fangningsbuffere for mmap-fangning"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL-opsætning:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Radio-understøttelse:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "aktivér radio-understøttelse"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Før du går videre bør du læse betingelserne i licensen omhyggeligt.  Den "
-"omfatter hele Mandriva Linux distributionen. Hvis du er enig i alle "
-"betingelserne i den, så klik på '%s'-boksen. Hvis ikke, så vil klikning på "
-"\"%s\"-knappen genstarte din maskine."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Acceptér"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"GNU/Linux er et flerbrugersystem, det vil sige at hver bruger kan have sine "
-"egne præferencer, sine egne filer og så videre. Du kan læse "
-"startvejledningen for at lære mere om flerbrugersystemer.\n"
-"Men i modsætning til 'root', som er systemadministratoren, vil brugerne som "
-"du tilføjer her ikke have lov til at ændre nogetsomhelst, undtagen deres "
-"egne filer og deres egne opsætninger, hvilket beskytter systemet mod "
-"utilsigtede eller ondartede ændringer som påvirker hele systemet. Du skal "
-"oprette i det mindste én almindelig bruger til dig selv - dette er den konto "
-"som du bør bruge til almindelig dagligt brug. Selvom det er meget nemt at "
-"logge ind som root for at gøre alt, kan det også være meget farligt!\n"
-"En meget simpel fejltagelse kan betyde at dit system ikke virker mere. Hvis "
-"du laver en alvorlig fejltagelse som almindelig bruger, vil det værste der "
-"kan ske at du vil tabe nogen information, men det vil ikke påvirke hele "
-"systemet.\n"
-"\n"
-"Det første felt spørger efter dit rigtige navn. Dette er naturligvis ikke "
-"krævet -du kan faktisk skrive hvad du lyster. DrakX vil bruge det første ord "
-"du indtastede i feltet og kopiere det til '%s'-feltet, hvilket er navnet, "
-"som denne bruger skal indtaste for at logge ind på systemet. Hvis du ønsker "
-"det kan du tilsidesætte det forvalgte og ændre brugernavnet. Det næste trin "
-"er at indtaste en adgangskode. Fra et sikkerhedsmæssigt synspunkt er "
-"adgangskoden for en ikke-priviligeret (normal) bruger er ikke så afgørende "
-"som 'Root'-adgangskoden, men det er ingen grund til at negligere det "
-"alligevel, ved at lade det være blankt eller at gøre det for nemt - når det "
-"kommer til stykket er det dine egne filer, der er i fare.\n"
-"\n"
-"Når du har klikket på '%s', kan du tilføje andre brugere. Tilføj en bruger "
-"for hver af dine venner, din far eller din søster. Når du har tilføjet alle "
-"de brugere du ønsker, klik da på '%s'.\n"
-"\n"
-"Klik på '%s'-knappen lader dig ændre standard-'skál' for denne bruger\n"
-"(bash er standard). \n"
-"\n"
-"Når du er færdig med at tilføje brugere, vil du blive spurgt om at vælge en "
-"bruger som automatisk kan logge ind på systemet når maskinen startes op. "
-"Hvis du er interesseret i denne facilitet (og ikke kærer dig synderligt om "
-"lokal sikkerhed), så vælg den ønskede bruger og vindueshåndtering og klik '%"
-"s'. Hvis du ikke er interesseret i denne facilitet, så afmarkér boksen med '%"
-"s'."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Brugernavn"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Næste"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Her er listet de eksisterende Linux-partitioner genkendt på din disk. Du kan "
-"beholde valgene gjort af vejlederen, de er velegnede til almindelig brug. "
-"Hvis du ændrer disse valg skal du i det mindste definere en rod-partition "
-"'/'. Lad være med at vælge en for lille partition, ellers vil du ikke kunne "
-"installere nok programmel. Hvis du ønsker at lagre data på en separat "
-"partition, skal du også vælge en '/home' (kun muligt hvis du har mere end én "
-"Linux-partition). \n"
-"Hver partition er listet som følger: 'Navn', 'Kapacitet'.\n"
-"\n"
-"'Navn' er kodet som følger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev:\n"
-"\n"
-"   * 'a' betyder 'hoved-drev på den primære IDE controller',\n"
-"\n"
-"   * 'b' betyder 'slave-drev på den primære IDE controller',\n"
-"\n"
-"   * 'c' betyder 'hoved-drev på den sækundære IDE controller',\n"
-"\n"
-"   * 'd' betyder 'slave-drev på den sækundære IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'første drev', 'b' betyder det 'andet drev', "
-"osv."
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Mandriva Linux installationen bliver distribueret på flere cdrom-er. Hvis en "
-"valgt pakke ligger på en anden cdrom, vil DrakX udskyde den nuværende cd og "
-"bede dig om at isætte den forespurgte cd. Hvis du ikke har den forespurgte "
-"cd ved hånden, så klik bare på '%s' - de tilsvarende pakker vil da ikke "
-"blive installerede."
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"Det er nu tid til at angive hvilke pakker du vil installere på dit system. "
-"Der er tusindvis af pakker til dit Mandriva Linux system, og for at gøre det "
-"nemmere at håndtere dem er pakkerne blevet placeret i grupper af lignende "
-"programmer.\n"
-"\n"
-"Mandriva Linux opdeler pakkegrupper i fire kategorier. Du kan vælge og vrage "
-"programmer fra de forskellige grupper, så en installation af "
-"'Arbejdsstation' kan også have programmer fra 'Udvikling'-kategorien "
-"installeret.\n"
-"\n"
-" * '%s': Hvis din maskine skal bruges som en arbejdsstation, vælg da en "
-"eller flere af programmerne der er i arbejdsstationskategorien.\n"
-"\n"
-" * '%s': hvis du vil bruge maskinen til programmering, vælg da de relevante "
-"pakker fra denne kategori. Den særlige 'LSB'-gruppe vil konfigurere dit "
-"system så det er så meget som muligt i overensstemmelse med Linux Standards "
-"Base specifikationerne.\n"
-"\n"
-"   Valg af 'LSB'-gruppen vil også installere kerne '2.4'-serien, i stedet "
-"for den normale '2.6'-kerne. Dette for at sikre 100%% LSB overensstemmelse "
-"for systemet. Hvis du ikke vælger -LSB--gruppen vil du dog stadig have et "
-"system der er næsten 100%% LSB-overensstemmende.\n"
-"\n"
-" * '%s': hvis det er planen at maskinen skal være en server, så vælg de mere "
-"almindelige tjenester, som du ønsker at installere på maskinen.\n"
-"\n"
-" * '%s': her skal du vælge foretrukne grafiske miljø. Vælg mindst ét, hvis "
-"du ønsker at have en grafisk grænseflade tilgængelig.\n"
-"\n"
-"Ved flytning af musen over et gruppenavn vises en kort forklarende tekst om "
-"denne gruppe.\n"
-"\n"
-"Du kan afkrydse '%s'-boksen, hvilket er nyttigt hvis du er bekendt med de "
-"pakker der tilbydes, eller hvis du ønsker at have helt styr på hvad der skal "
-"installeres.\n"
-"\n"
-"Hvis du starter installationen i '%s'-tilstand, kan du fravælge alle grupper "
-"og forhindre installationen af enhver ny pakke. Dette er nyttigt ved "
-"reparation eller opdatering af et ekisterende system.\n"
-" \n"
-"Hvis du fravælger alle grupper ved udførelse af en almindelig installation "
-"(i modsætning til en opgradering), vil en dialog komme frem som foreslår "
-"dig  forskellige former for minimal installation: \n"
-"\n"
-" * '%s' installerer de færrest mulige antal pakker for at få en fungerende "
-"grafisk arbejdsstation.\n"
-"\n"
-" * '%s' installerer det basale system plus basale nytteprogrammer og "
-"tilhørende dokumentation. Denne installation er passende til at sætte en "
-"server op.\n"
-"\n"
-" * '%s' vil installere det absolut mindst mulige antal pakker nødvendigt for "
-"at få et virkende Linux-system. Med denne installation fås kun en "
-"grænseflade med kommandolinjer. Den totale størrelse af denne installation "
-"er omkring 65 megabyte."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Arbejdsstation"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Udvikling"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Grafisk miljø"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Individuelt pakkevalg"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Opgradér"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Med X"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Med basal dokumentation"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Virkeligt minimale installation"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"Hvis du vælger at installere pakker individuelt, vil installeringen vise et "
-"træ med alle pakker opdelt i grupper og undergrupper. Under gennembladring "
-"af træet kan du udvælge hele grupper, undergrupper eller individuelle "
-"pakker.\n"
-"\n"
-"Hver gang du udvælger en pakke i træet vil en beskrivelse fremkomme til "
-"højre for at lade dig vide formålet med denne pakke. \n"
-"\n"
-"!! Når en server-pakke er blevet valgt, enten fordi du specielt valgte den "
-"individuelle pakke, eller fordi den var en del af en gruppe af pakker, vil "
-"du blive spurgt om at bekræfte at du virkelig ønsker at installere disse "
-"servere. Som standard under Mandriva Linux bliver installerede servere "
-"startet op ved opstart af maskinen. Selvom de er sikre og ikke har nogen "
-"kendte problemer på udgivelsestidspunktet for distributionen, er det absolut "
-"muligt at sikkerhedshuller blev opdaget efter at denne version af Mandriva "
-"Linux blev færdiggjort. Hvis du ikke véd hvad en bestemt tjeneste vil gøre "
-"eller hvorfor den skal installeres, så klik '%s' her. Et klik med '%s' her "
-"vil installere de nævnte servere og de vil blive startet automatisk under "
-"opstarten!!\n"
-"\n"
-"'%s'-valget deaktiverer advarselsdialogen, som vises hver gang "
-"installeringsprogrammet automatisk vælger en pakke for at løse et "
-"afhængighedsproblem. Nogen pakker afhænger af andre oginstallation af en "
-"bestemt pakke kan kræve installationen af andre pakker. "
-"Installationsprogrammet kan beregne hvilke pakker der er krævet for at "
-"tilfredsstille en afhængighed for at kunne færdiggøre en installation "
-"problemfrit.\n"
-"\n"
-"Den klejne disketteikon i bunden af listen muliggør indlæsning af en "
-"pakkeliste oprettet ved en tidligere installation. Dette er nyttigt hvis du "
-"har et antal maskiner som du ønsker at konfigurere på samme måde. Klik på "
-"denne ikon vil bede dig om at indsætte disketten lavet i slutningen på en "
-"anden installation. Se råd nr to i det sidste trin for hvordan en sådan "
-"diskette kan laves."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "Automatiske afhængigheder"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"'%s': Et klik på '%s'-knappen vil åbne vejlederen for printerkonfigurering. "
-"Kig i det tilhørende kapitel i 'Startvejledningen' for mere information om "
-"hvordan man opsætter en ny printer. Grænsefladen\n"
-"præsenteret i vores manual ligner den som bruges på installationstidspunktet."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Konfigurér"
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Denne dialog bruges til at vælge hvilke tjenester du ønsker skal startes ved "
-"opstart af maskinen.\n"
-"\n"
-"DrakX vil præsentere alle tjenester, som er med i den aktuelle installation. "
-"Gennemse hver enkelt af dem omhyggeligt og vælg dem fra som ikke er "
-"nødvendige på opstartstidspunktet.\n"
-"\n"
-"En kort forklarende tekst om en tjeneste bliver vist når den vælges. Hvis du "
-"ikke er sikker på om en tjeneste er nyttig eller ej, er det dog sikrere at "
-"bruge den foreslåede opførsel.\n"
-"\n"
-"Vær specielt varsom på dette trin hvis du planlægger at bruge maskinen som "
-"server: du vil formentlig ønske ikke at starte nogensomhelst tjeneste op som "
-"du ikke har brug for. Husk at nogen tjenester kan være farlige hvis de er "
-"aktiveret på en server. Vælg som hovedregel kun de tjenester som du virkelig "
-"behøver."
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"GNU/Linux håndterer tiden i GMT (Greenwich Mean Time) og oversætter den til "
-"lokal tid ifølge den tidszone du har valgt. Hvis uret på bundkortet er sat "
-"til lokal tid, kan du deaktivere dette ved at fravælge '%s', hvilket vil "
-"lade GNU/Linux vide at systemuret og maskinens ur er i samme tidszone. Dette "
-"er nyttigt når maskinen også bruges til andre operativsystemer.\n"
-"\n"
-"Muligheden '%s' vil automatisk tilpasse systemuret ved at forbinde til en "
-"ekstern tidsserver på internettet. For at denne facilitet kan virke, skal du "
-"have en fungerende internetforbindelse. Vi anbefaler at du vælger en "
-"tidsserver med en placering nær ved dig. Denne mulighed installerer faktisk "
-"en tidsserver som også kan bruges af andre maskiner på dit lokalnetværk."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Maskin-ur sat til GMT"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Automatisk tidssynkronisering"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"Grafikkort\n"
-"\n"
-"   Installationsprogrammet vil normalt automatisk finde og konfigurere "
-"grafikkortet installeret på din maskine. Hvis dette ikke er tilfældet, kan "
-"du fra denne liste vælge det kort du faktisk har installeret.\n"
-"   I tilfælde af at forskellige drivere er tilgængelige til dit kort, med "
-"eller uden 3D-accelleration, bliver du spurgt om at vælge den server der "
-"bedst opfylder dine behov."
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"X (for X Window System) er hjertet af GNU/Linux' grafiske grænseflade som "
-"alle de grafiske miljøer (KDE, GNOME, AfterStep, WindowMaker, mv.) der "
-"kommer sammen med Mandriva Linux afhænger af.\n"
-"\n"
-"Du vil se en liste med forskellige parametre der kan ændres for at få den "
-"bedst mulige grafiske fremvisning:\n"
-"\n"
-"Grafikkort\n"
-"\n"
-"   Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
-"grafikkortet installeret på din maskine. Hvis dette ikke er rigtigt kan du "
-"fra denne liste vælge det kort du faktisk har installeret.\n"
-"\n"
-"   I tilfælde af at forskellige drivere er tilgængelige til dit kort, med "
-"eller uden 3D-accelleration, bliver du spurgt om at vælge den server der "
-"bedst opfylder dine behov.\n"
-"\n"
-"\n"
-"Skærm\n"
-"\n"
-"   Normalt vil Installationsprogrammet automatisk finde ud af at konfigurere "
-"skærmen tilsluttet din maskine. Hvis dette ikke er rigtigt, kan du fra denne "
-"liste vælge den skærm som er tilsluttet din maskine.\n"
-"\n"
-"\n"
-"\n"
-"Opløsning\n"
-"\n"
-"   Her kan du vælge de opløsninger og farvedybder som er tilstede for dit "
-"grafikudstyr. Vælg dem som bedst opfylder dine behov (du vil kunne ændre "
-"dette efter installationen). En prøve på den valgte konfiguration vil blive "
-"vist på skærmen.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Afhængigt af dit udstyr vil denne indgang muligvis ikke vises.\n"
-"\n"
-"   Systemet vil prøve at åbne en grafisk skærm i den ønskede opløsning. Hvis "
-"du ser testbeskeden under afprøvningen og svarer '%s', så vil DrakX gå "
-"videre til næste trin. Hvis du ikke ser beskeden, så betyder det at en del "
-"af den automatisk fundne konfiguration var forkert og testen vil automatisk "
-"slutte efter 12 sekunder, og bringe dig tilbage til menuen. Ændr "
-"indstillingerne til du får en korrekt grafisk fremvisning.\n"
-"\n"
-"\n"
-"\n"
-"Valgmuligheder\n"
-"\n"
-"   Dette trin lader dig vælge om du ønsker at din maskine automatisk skal "
-"skifte til en grafisk grænseflade ved opstart. Selvfølgelig vil du ønske at "
-"svare '%s', hvis din maskine skal bruges som server, eller hvis ikke "
-"lykkedes dig at få skærmen konfigureret. "
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Skærm\n"
-"\n"
-"   Installationsprogrammet vil normalt automatisk finde ud af at konfigurere "
-"skærmen tilsluttet din maskine. Hvis dette ikke er den rigtige, kan du i "
-"denne liste vælge den skærm du faktisk har tilsluttet din maskine."
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Opløsning\n"
-"\n"
-"   Hér kan du vælge opløsninger og farvedybder ud af de tilgængelige "
-"muligheder for dit udstyr. Vælg dem som bedst opfylder dine behov (du vil "
-"dog kunne ændre dette efter installationen). Et eksempel på den valgte "
-"konfiguration vil blive vist på skærmen."
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"I tilfælde af at forskellige servere er tilgængelige for dit kort, med eller "
-"uden 3D-accelleration, bliver du spurgt om at vælge den server der bedst "
-"opfylder dine behov."
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Til sidst valgmulighederne\n"
-"\n"
-"Dette trin lader dig vælge om du ønsker automatisk at skifte til en grafisk "
-"grænseflade ved opstart. Selvfølgelig vil du ønske at svare '%s', hvis din "
-"maskine skal bruges som server, eller hvis ikke lykkedes dig at få skærmen "
-"konfigureret."
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"Nu skal du vælge hvor på din harddisk du vil installere dit Mandriva Linux-"
-"operativsystem. Hvis disken er tom eller et eksisterende operativsystem "
-"bruger alt pladsen på den, bliver du nødt til at partitionere drevet. "
-"Partitionering vil sige at diskdrevet opdeles i logiske dele for at lave den "
-"plads der behøves til at installere dit nye Mandriva Linux-system.\n"
-"\n"
-"Da partitioneringen af en disk normalt ikke kan fortrydes og kan føre til "
-"tab af data, kan det godt være frustrerende og stressende for uøvede "
-"brugere. Heldigvis har DrakX en vejleder som forenkler denne proces. Før du "
-"fortsætter med dette trin kan du gennemlæse resten af dette afsnit, og ikke "
-"mindst tage dig den tid du behøver.\n"
-"\n"
-"Afhængig af dit diskdrevs konfiguration er flere muligheder tilstede:\n"
-"\n"
-" * '%s': Denne mulighed vil udføre en automatisk opdeling af dine tomme "
-"diskdrev. Hvis du bruger denne mulighed vil du ikke blive spurgt om mere.\n"
-"\n"
-" * '%s': Vejlederen har fundet en eller flere eksisterende Linux-partitioner "
-"på dit diskdrev. Hvis du vil bruge dem, så vælg denne mulighed. Du vil så "
-"blive spurgt om monteringspunkter tilknyttet hver af partitionerne. De gamle "
-"monteringspunkter er forvalgt og i de fleste tilfælde er det en god idé at "
-"beholde dem.\n"
-"\n"
-" * '%s': Hvis Microsoft Windows er installeret på din disk og bruger al "
-"pladsen, bliver du nødt til at lave fri plads til GNU/Linux. For at gøre "
-"dette kan du slette dine Microsoft Windows partitioner og data (se "
-"muligheden \"Slet hele disken\") eller ændre størrelsen på din Microsoft "
-"Windows-FAT- eller NTFS-partition. Størrelsesændringen kan fortages uden tab "
-"af data, hvis du i forvejen har defragmenteret Windows-partitionen. Det "
-"anbefales på det kraftigste at du laver en sikkerhedskopi først. Denne "
-"mulighed anbefales hvis du vil bruge både Mandriva Linux og Microsoft "
-"Windows på samme maskine.\n"
-"\n"
-"  Før du vælger denne løsning, bør du forstå at størrelsen på din Microsoft "
-"Windows partition vil blive mindre end da du startede. Du vil have mindre "
-"fri plads under Microsoft Windows til at gemme dine data eller installere "
-"nyt programmel.\n"
-"\n"
-" * '%s': Hvis du vil slette alle data på alle partitioner på denne disk og "
-"erstatte dem med dit nye Mandriva Linux-system, kan du vælge denne mulighed. "
-"Vær forsigtig, for du vil ikke være i stand til at fortryde denne handling "
-"efter at du har sagt ja.\n"
-"\n"
-"   !! Hvis du bruger denne mulighed vil alle eksisterende data på din disk "
-"gå tabt. !!\n"
-"\n"
-" * '%s': Denne mulighed kommer til syne når diskdrevet er fuldstændigt "
-"optaget af Microsoft Windows. Valg af denne mulighed vil simpelthen slette "
-"alt på disken og begynde fra en frisk, og partitionere det hele fra ny.\n"
-"\n"
-"   !! Hvis du bruger denne mulighed vil alle eksisterende data på din disk "
-"gå tabt. !!\n"
-"\n"
-" * '%s': Vælg denne mulighed hvis du vil partitionere disken i hånden. Vær "
-"forsigtig - det er en stærk , men også farlig mulighed. og du kan meget nemt "
-"komme til at slette alle dine data. Derfor er denne mulighed kun anbefalet "
-"hvis du har lavet noget lignende før og har nogen erfaring. For flere "
-"instruktioner om brugen af DiskDrake-programmet kan du se i afsnittet "
-"'Administrér dine partitioner' i 'Startervejledningen'."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Brug fri plads"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Brug eksisterende partition"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Brug den frie plads på Windows-partitionen"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Slet hele disken"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Fjern Windows"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Brugerdefineret disk-opdeling"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"Værsgo'. Installationen en nu færdig og dit GNU/Linux-system er nu klar til "
-"brug. Klik blot på '%s' for at genstarte systemet. Glem ikke at fjerne "
-"installationsmediet (cdrom eller diskette). Den første ting, som du burde "
-"se, efter din maskine har lavet sine test af maskinel, er opstartsmenuen, "
-"som lader dig vælge det operativsystem der skal startes.\n"
-"\n"
-"'%s'-knappen viser to ekstra knapper for:\n"
-"\n"
-" * '%s': at oprette en installerings-diskette, som automatisk vil udføre en "
-"hel installation uden hjælp fra en operatør, magen til den installation du "
-"lige har konfigureret.\n"
-"\n"
-"   Bemærk at to forskellige muligheder er tilstede efter klik på denne "
-"knap:\n"
-"\n"
-"   * '%s': Dette er en delvist automatiseret installering. "
-"Partitioneringstrinnet er den eneste interaktive procedure.\n"
-"\n"
-"   * '%s': Fuldautomatisk installering: harddisken bliver fuldstændig "
-"genoverskrevet, alle data forsvinder.\n"
-"\n"
-"   Denne facilitet er meget nyttig ved installering af et antal lignende "
-"maskiner. Se afsnittet om autoinstallering på vores websted for yderligere "
-"oplysninger.\n"
-"\n"
-" * '%s'(*): gemmer en liste med de pakker der er valgt under denne "
-"installation. For at bruge dette pakkevalg i en anden installation kan "
-"disketten indsættes i drevet og installeringen kan startes. Brug [F1]-tasten "
-"på opstartsskærmen og indtast >>linux defcfg=\"floppy\"<< og trykke på "
-"[Enter]-tasten.\n"
-". \n"
-"(*) Du har brug for en FAT-formatteret diskette. For at lave en under GNU/"
-"Linux skal du taste\n"
-"\"mformat a:\", eller \"fdformat /dev/fd0\" fulgt af \"mkfs.vfat\n"
-"/dev/fd0\"."
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Lav autoinstallations-diskette"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Afspil igen"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Automatisk"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Gem pakke-valg"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Hvis du vælger at genbruge nogle gamle GNU/Linux-partitioner, kan duønske at "
-"omformatere nogle af dem og slette de data som de indeholder. For at gøre "
-"dette skal du også  vælge disse partitioner.\n"
-"\n"
-"Bemærk at det ikke er nødvendigt at omformatere alle allerede eksisterende "
-"partitioner. Det er nødvendigt at omformatere de partitioner, der indeholder "
-"operativsystemet (såsom '/', '/usr' og '/var', men du er ikke nødt til at "
-"omformatere partitioner som du ønsker at beholde (typisk /home).\n"
-"\n"
-"Vær forsigtig med valg af partitioner; efter formatering vil alle data være "
-"slettede på de valgte partitioner, og du vil ikke kunne redde nogetsomhelst "
-"af det.\n"
-"\n"
-"Klik på '%s' når du er klar til at formatere partitionerne.\n"
-"\n"
-"Klik på '%s' hvis du ønsker at vælge andre partitioner til at installere dit "
-"nye Mandriva Linux operativsystem.\n"
-"\n"
-"Klik på '%s' for at vælge partitioner som du ønsker at tjekke for dårlige "
-"blokke."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Forrige"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"På det tidspunkt hvor du installerer Mandriva Linux er det sandsynligt at "
-"nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. Fejl "
-"er måske blevet rettet, og sikkerhedsproblemer måske løst. Det er nu muligt "
-"for dig at hente disse ned fra internettet for at disse opdateringer kan "
-"komme dig til gode. Vælg '%s' hvis du har en fungerende internet- "
-"forbindelse eller '%s' hvis du foretrækker at installere opdaterede pakker "
-"senere.\n"
-"\n"
-"Valg af '%s' viser en liste af netsteder hvorfra opdateringer kan hentes. Du "
-"bør vælge en der er nær ved dig. Så vil et træ med pakkevalg blive vist: "
-"gennemse valget og tryk '%s' for at modtage og installere de valgte pakker "
-"eller '%s' for at afbryde."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Installér"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"Nu vil DrakX give dig mulighed for at vælge det sikkerhedsniveau du ønsker "
-"for maskinen. Hovedreglen er at sikkerhedsniveauet bør sættes højere, hvis "
-"maskinen skal indeholde vigtige data, eller hvis den skal være direkte "
-"offentligt på Internettet. Men et højere sikkerhedsniveau vindes normalt på "
-"bekostning af letheden af anvendelsen.\n"
-"\n"
-"Hvis du ikke véd hvad du skal vælge, så behold den foreslåede mulighed. Du "
-"vil kunne ændre det senere med værktøjet draksec som er en del af Mandriva "
-"Linux Kontrolcentret.\n"
-"\n"
-"Udfyld '%s'-feltet med epost-adressen på den person, som er ansvarlig for "
-"sikkerhed. Sikkerhedsmeddelelser vil blive sendt til denne adresse."
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Sikkerhedsadministrator"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Nu skal du vælge hvilke partitioner som skal bruges til installering af dit "
-"Mandriva Linux system. Hvis partitionerne allerede er blevet defineret, "
-"enten fra en tidligere installation af GNU/Linux eller med et andet "
-"partitioneringsværktøj, kan du bruge de eksisterende partitioner. Ellers "
-"skal disk-partitionerne defineres først.\n"
-"\n"
-"For at lave partitioner skal du først vælge et diskdrev. Du kan vælge "
-"diskdrevet der skal partitioneres ved at trykke på \"hda\" for det første "
-"IDE drev, \"hdb\" for det andet eller \"sda\" for det første SCSI-drev og så "
-"videre.\n"
-"\n"
-"For at partitionere det valgte diskdrev kan du bruge disse muligheder:\n"
-"\n"
-"  * '%s': Dette valg sletter alle partitioner på det valgte diskdrev.\n"
-"\n"
-"  * '%s': dette valg tillader dig automatisk at lave Ext3 og swappartitioner "
-"på den fri plads på dit drev.\n"
-"\n"
-"'%s': giver adgang til flere faciliteter:\n"
-"\n"
-" * '%s': Gemmer din partitionstabel på en diskette. Nyttigt ved senere "
-"redning af partitionstabellen, om nødvendigt. Det anbefales meget at du "
-"bruger dette trin.\n"
-"\n"
-" * '%s': lader dig genskabe en tidligere gemt partitionstabel fra diskette.\n"
-"\n"
-" * '%s': hvis din partitionstabel er beskadiget, kan du prøve at redde den "
-"med denne mulighed. Vær forsigtig og husk at det ikke altid virker.\n"
-"\n"
-" * '%s': forkaster alle ændringer og genindlæser partitionstabellen som "
-"oprindeligt lå på diskdrevet\n"
-"\n"
-" * '%s': fravalg af denne mulighed vil tvinge brugere til at manuelt montere "
-"og afmontere medier såsom disketter og cdrommer\n"
-"\n"
-" * '%s': Hvis du ønsker at bruge vejlederen til at partitionere dit "
-"diskdrev, kan du bruge denne mulighed. Dette anbefales, hvis du ikke har den "
-"store forståelse om partitionering\n"
-"\n"
-" * '%s': Du kan bruge denne mulighed for at annullere dine ændringer\n"
-"\n"
-" * '%s': giver mulighed for yderligere handlinger på partitioner (type, "
-"valgmuligheder, format) og giver mere information om diskdrevet\n"
-"\n"
-" * '%s': når du er færdig med partitionering af din disk, vil dette skrive "
-"ændringerne tilbage på disken.\n"
-"\n"
-"Ved definering af en partitionsstørrelse kan du finjustere denne ved at "
-"bruge piletasterne på tastaturet.\n"
-"\n"
-"Bemærk: du kan nå enhver valgmulighed ved brug af tastaturet: navigér gennem "
-"partitionerne med Tab og op- og ned-pilene.\n"
-"\n"
-"Når en partition er valgt kan du bruge:\n"
-"\n"
-" * Ctrl-c for at lave en ny partition (Når en tom partition er valgt)\n"
-"\n"
-" * Ctrl-d for at slette en partition\n"
-"\n"
-" * Ctrl-m for at sætte et monteringssti\n"
-"\n"
-"For at få information om de forskellige tilgængelige filsystemstyper kan du "
-"læse kapitlet ext2fs i 'Referencemanualen'.\n"
-"\n"
-"Hvis du er i gang med at installere på en PPC-maskine skal du lave en lille "
-"HFS-'bootstrap'-partition på mindst 1 MB til Yaboot-systemstarteren. Hvis du "
-"vælger at lave partitionen en smule større, f.eks. 50 MB kan den være nyttig "
-"til at gemme en ekstra kerne og ramdisk-billede for nødsituationer ved "
-"opstart."
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Automontering af flytbare medier"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Skift mellem normal og ekspert-tilstand"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Mere end én Microsoft Windows partition er blevet genkendt på dit diskdrev. "
-"Vælg den som du ønsker at ændre størrelse på for at kunne installere dit nye "
-"Mandriva Linux operativsystem.\n"
-"\n"
-"Hver partition er listet som følger: 'Linux navn', 'Windows navn', "
-"'Kapacitet'.\n"
-"\n"
-"'Linux navn' er kodet som følger: 'drevtype', 'drevnummer', "
-"'partitionsnummer' (for eksempel '/hda1').\n"
-"\n"
-"'drevtype' er 'hd' hvis dit diskdrev er et IDE drev, og 'sd' hvis det er et "
-"SCSI drev.\n"
-"\n"
-"'drevnummer' er altid et bogstav efter 'hd' eller 'sd'. For IDE drev "
-"gælder:\n"
-"\n"
-"   * 'a' betyder 'hoved-drev på den primære IDE controller',\n"
-"\n"
-"   * 'b' betyder 'slave-drev på den primære IDE controller',\n"
-"\n"
-"   * 'c' betyder 'hoved-drev på den sækundære IDE controller',\n"
-"\n"
-"   * 'd' betyder 'slave-drev på den sækundære IDE controller'.\n"
-"\n"
-"For SCSI drev betyder 'a' det 'laveste SCSI-nummer', 'b' betyder det "
-"'næstlaveste SCSI-nummer', osv.\n"
-"\n"
-"'Windows navn' er det bogstav som dit drev har under Windows (den første\n"
-"disk eller partition kaldes 'C:')."
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"'%s': Tjek det aktuelle valg af land. Hvis du ikke er i dette land, så klik "
-"på '%s'-knappen og vælg et andet. Hvis dit land ikke er på den første liste "
-"der vistes, så klik på '%s'-knappen for at få den komplette liste over lande."
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"Dette trin bliver kun aktiveret hvis der bliver fundet en eksisterende\n"
-"GNU/Linux partition på din maskine.\n"
-"\n"
-"DrakX skal nu vide om du vil udføre en ny installation eller en opgradering\n"
-"af et eksisterende Mandriva Linux-system.\n"
-"\n"
-" * \"%s\": Dette vil stort sét slette hele det gamle system. Dog kan du "
-"afhængigt af din partitionsopsætning forhindre at nogen af dine ekisterende "
-"data (især kataloger i '/home') fra at blive overskrevet. Hvis du ønsker at "
-"ændre hvordan dine diskdrev er partitioneret, eller ændre på filsystemet, "
-"bør du bruge denne mulighed.\n"
-"\n"
-" * \"%s\": Denne installationsklasse lader dig opgradere pakkene som er "
-"installeret på dit nuværende Mandriva Linux-system. Din nuværende "
-"partitionsopsætning og brugerdata bliver ikke berørt. De fleste andre "
-"konfigurationstrin forbliver tilgængelige, i lighed med en "
-"standardinstallation.\n"
-"\n"
-"\"Opgradér\"-valget bør fungere fint på Mandriva Linux-systemer som kører "
-"version '8.1' eller nyere. Udførelse af Opgradér på versioner tidligere end "
-"Mandriva Linux '8.1' er ikke anbefalet."
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Afhængigt af det sprog du har valgt vil DrakX automatisk vælge en bestemt "
-"type tastaturopsætning. Tjek at valget er passende, eller vælg en anden "
-"tastaturudlægning.\n"
-"Men du har måske ikke et tastatur som svarer nøjagtigt til dit sprog: for "
-"eksempel hvis du er en engelsktalende svejtser, vil du måske have et "
-"svejtsisk tastatur. Eller hvis du taler engelsk og bor i Québec, er du måske "
-"i samme situation, hvor dit modersmål og tastaturet for landet ikke passer "
-"sammen. I begge tilfælde giver dette installationstrin mulighed for at vælge "
-"et passende tastatur fra listen.\n"
-"\n"
-"Klik på '%s'-tasten for at få víst en liste af understøttede tastaturer.\n"
-"\n"
-"Hvis du vælger en tastaturudlægning baseret på et ikke-latinsk alfabet, vil "
-"den næste dialog give dig mulighed for at vælge den tastekombination, der "
-"vil skifte mellem den latinske og den ikke-latinske udlægning."
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"Det første trin er at vælge dit foretrukne sprog.\n"
-"\n"
-"Dit valg af foretrukkent sprog vil påvirke sproget for installeringen, "
-"dokumentationen og systemet generelt. Vælg den verdensdel du befinder dig i, "
-"og så det sprog, du taler.\n"
-"\n"
-"Hvis du klikker på '%s'-knappen kan du vælge andre sprog, der installeres  "
-"på maskinen, og derved installeres de sprogspecifikke filer for "
-"systemdokumentation og programmer. Hvis spanske brugere skal bruge din "
-"maskine, vælg da dansk som standardsproget i træ-visningen, og '%s' i den "
-"avancerede afdeling.\n"
-"\n"
-"Om UTF-8 (ISO 10646)-understøttelse. ISO 10646 er en ny tegnkodning som er "
-"beregnet til at dække alle eksiterende sprog. Dog er fuld understøttelse for "
-"dette i GNU/Linux stadig under udvikling. Af denne årsag vil Mandriva Linux' "
-"brug af UTF-8 afhænge af brugerens valg:\n"
-"\n"
-" * Hvis du vælger et sprog som har en lang tradition for tegnkodning (latin1 "
-"sprog, russisk, japansk, kinesisk, koreansk, thai, græsk, tyrkisk, de fleste "
-"iso-8859-2 sprog) vil den traditionelle tegnkodning blive brugt som "
-"standard;\n"
-"\n"
-" * Andre sprog vil bruge ISO 10646 som standard;\n"
-"\n"
-" * Hvis to eller flere sprog er krævet, og disse sprog ikke bruger samme "
-"kodning, så vil ISO 10646 blive brugt for hele systemet;\n"
-"\n"
-" * Endeligt kan ISO 10646 blive gennemtvunget for brugeren på hele systemet "
-"på foranledning af brugeren ved at vælge muligheden '%s' uafhængigt af "
-"hvilket sprog der er valgt.\n"
-"\n"
-"Bemærk at du ikke er begrænset til at vælge et enkelt yderligere sprog. Du "
-"kan vælge flere sprog, eller endog installere dem alle ved at markere '%s'-"
-"boksen. Valg af understøttelse for et sprog betyder at oversættelser, "
-"skrifttyper, stavekontrol mv for dette sprog bliver installeret. \n"
-"For at skifte mellem de forskellige sprog installeret på systemet kan du "
-"starte programmet '/usr/sbin/localedrake' som 'root' for at ændre det sprog "
-"der bruges af hele systemet. Kørsel af dette program som almindelig bruger "
-"vil kun ændre sprogindstillingerne for denne bruger."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "Spansk"
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"Normalt har DrakX ingen problemer med at finde ud af hvor mange knapper du "
-"har på din mus. Den antager at du har en to-knapsmus og vil lave en "
-"opsætning hvor den tredje knap emuleres. Den tredje knap for en to-knaps mus "
-"kan fås ved at trykke på den venstre og højre museknap samtidigt. DrakX vil "
-"automatisk vide om din mus bruger et PS/2, et serielt eller et USB-"
-"grænsesnit.\n"
-"\n"
-"Hvis du har en 3-knaps mus uden hjul, kan du vælge '%s'-musen. DrakX vil så "
-"konfigurere din mus så du kan simulere hjulet med den: for at gøre dette "
-"skal du trykke på midterknappen og flyttte op og ned på musen.\n"
-"\n"
-"Hvis du ønsker en anden type mus, vælg da den rigtige type mus fra den viste "
-"liste.\n"
-"\n"
-"Du kan vælge '%s'-indgangen for at få en 'generisk' musetype som vil virke "
-"med næsten alle mus.\n"
-"\n"
-"Hvis du vælger en mus forskellig fra den forvalgte, vil der blive vist en "
-"afprøvningsskærm. Brug knapperne og hjulet for at efterprøve om indstillerne "
-"er korrekte, og at musen virker korrekt. Hvis musen ikke virker godt, tryk "
-"da på mellemrumstangenten eller vognretur for at annullere testen, og du vil "
-"vende tilbage til listen med mus.\n"
-"\n"
-"Til tider findes mus med hjul ikke automatisk, så du vil behøve at vælge din "
-"mus fra en liste. Forsikr dig om at du vælger den der passer til porten som "
-"din mus er tilsluttet. Efter valg af en mus og trykning på '%s'-knappen vil "
-"et billede blive vist med en mus på skærmen. Rul med musehjulet for at "
-"forsikre dig om at det er aktiveret korrekt. Når du ruller med dit musehjul "
-"vil du se musehjulet på skærmen bevæger sig. Afprøv knapperne og tjek at "
-"musemarkøren flytter sig når du flytter rundt på musen."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "med hjul-emulering"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Universel | Alle PS/2 & USB mus"
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Vælg den rigtige port. For eksempel er navnet for COM1-porten  under MS "
-"Windows 'ttyS0' under GNU/Linux."
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/Linux- "
-"system: Du skal indtaste din 'root'-adgangskode. 'Root' er "
-"systemadministratoren og er den eneste bruger, der har lov til at lave "
-"opdateringer, tilføje brugere, ændre i den overordnede systemkonfiguration "
-"og så videre. Kort sagt, 'root' kan gøre alt! Derfor skal du vælge en "
-"adgangskode der er svær at gætte - DrakX vil fortælle dig hvis adgangskoden "
-"du valgte er for simpel. Som du kan se er du ikke tvunget til at indtaste en "
-"adgangskode, men vi advarer på det kraftigste mod dette. GNU/Linux er lige "
-"så udsat for behandlingsfejl som ethvert andet operativsystem. Da 'root' kan "
-"overvinde alle forhindringer og uforvarende slette alle data på partitioner "
-"ved sorgløst at behandle partitionerne selv, er det vigtigt at det er "
-"vanskeligt at blive 'root'.\n"
-"\n"
-"Adgangskoden bør være en blanding af bogstaver og tal og mindst 8 tegn "
-"langt. Skriv aldrig en adgangskode ned for 'root' - det gør det alt for nemt "
-"at bryde ind i dit system.\n"
-"\n"
-"Gør dog ikke adgangskoden for lang eller for kompliceret da du skal være i "
-"stand til at huske den uden for stort besvær!\n"
-"\n"
-"Adgangskoden vil ikke blive vist på skærmen når du indtaster den. Du skal "
-"derfor indtaste adgangskoden to gange, for at begrænse risikoen for "
-"tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, skal du "
-"bruge denne 'ukorrekte' adgangskode den første gang du prøver at koble op "
-"som 'root'.\n"
-"\n"
-"Hvis du ønsker at en autentificerings-server skal styre adgangen til din "
-"maskine, så klik på '%s'-knappen.\n"
-"\n"
-"Hvis dit netværk bruger LDAP, NIS eller PDC Windows domæne-"
-"autentificeringstjenester, vælg da den rigtige som '%s'. Hvis du ikke véd "
-"hvilken der skal bruges, så bør du spørge din systemadministrator.\n"
-"\n"
-"Hvis du har problemer med at huske adgangskoder, så kan du vælge '%s' hvis "
-"din maskine ikke vil være forbundet til Internettet, og du stoler på alle "
-"som kan få adgang til maskinen. "
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "autentifikation"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"En opstartsindlæser er et lille program som startes af maskinen på "
-"opstartstidspunktet. Det er ansvarligt for at starte hele systemet op. "
-"Normalt er dette trin helt automatisk. DrakX vil analysere opstartssektoren "
-"på disken og handle ud fra det som findes der.\n"
-"\n"
-" * Hvis en opstartssektor for Windows bliver fundet, vil den erstatte denne "
-"med en GRUB- eller LILO-opstartsektor. På denne måde kan du indlæse enten "
-"GNU/Linux eller ethvert andet operativsystem installeret på din maskine.\n"
-"\n"
-" * Hvis en opstartsektor for grub eller LILO bliver fundet, vil den blive "
-"erstattet med en ny.\n"
-"\n"
-"Hvis det ikke er mulig at afgøre dette automatisk, vil DrakX spørge dig hvor "
-"opstartsindlæseren skal installeres. Generelt er '%s' det sikreste sted. "
-"Valg af '%s' vil ikke installere nogen opstartsindlæser. Brug kun dette hvis "
-"du véd hvad du gør."
-
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Nu er det tid til at vælge et udskrivningssystem for din maskine. Andre "
-"styresystemer tilbyder måske ét, men Mandriva tilbyder to. Printersystemerne "
-"er hver især bedst til en bestemt konfigurationstype.\n"
-"\n"
-" * '%s' - som betyder 'print, do not queue' (udskriv, kø ej), er valget, "
-"hvis du har en direkte forbindelse til din printer, og du ønsker at kunne "
-"klare printproblemer med det samme, og du ikke har nogen printere via "
-"netværk. ('%s' vil kun behandle meget simple netværkstilfælde, og er lidt "
-"sløvt på netværk.) Det anbefales at du bruger 'pdq' hvis dette er din første "
-"erfaring med GNU/Linux.\n"
-"\n"
-" * '%s' - står for 'Common Unix Printing System' (Fælles printersystem for "
-"Unix) er fremragende til at udskrive på din lokale printer, og også på den, "
-"der står på den anden side af jordkloden. Det er nemt at konfigurere, og kan "
-"virke som en server eller klient for det bedagede 'lpd'-printsystem, så det "
-"er kompatibelt med ældre styresystemer, som stadig kan have brug for "
-"udskriftstjenester. Det er ganske stærkt, men den basale opsætning er næsten "
-"lige så nem som for 'pdq'. Hvis du har brug for at dette efterligner en "
-"'lpd'-server, skal du aktivere 'cups-lpd'-dæmonen. '%s' har grafiske "
-"grænseflader for udskrivning og valg af printermuligheder, og for "
-"administration af printeren.\n"
-"\n"
-"Hvis du laver et valg nu og senere finder ud af at du ikke kan lide dit "
-"udskriftssystem, kan du ændre det ved at køre PrinterDrake fra Mandriva "
-"Linuxs Kontrolcenter, og klikke på '%s'-knappen."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Ekspert"
-
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX vil først finde alle IDE-enheder der er tilstede på din maskine. Den "
-"vil også lede efter en eller flere PCI SCSI-kort på dit system. Hvis et SCSI-"
-"kort finDES, vil DrakX automatisk installere en driver til det.\n"
-"\n"
-"Da maskineleftersøgningen ikke er idiotsikker, kan DrakX fejle i at finde "
-"dine diskdrev. I så fald må du angive dit maskinel manuelt.\n"
-"\n"
-"Hvis du måtte angive dit PCI SCSI-kort manuelt, vil DrakX spørge om du vil "
-"specificere nogle indstillingsmuligheder for den. Du bør lade DrakX spørge "
-"udstyret om opsætning af kortspecifikke indstillinger, som er nødvendige for "
-"at initialisere kortet. De fleste gange vil DrakX finde ud af dette uden "
-"problemer.\n"
-"\n"
-"Hvis DrakX ikke kan få oplysninger om indstillinger ud af udstyret, som skal "
-"bruges til opsætningen, skal du angive opsætningsinformation til driveren. "
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"'%s': Hvis et lydkort er blevet fundet på dit system, vil det blive vist "
-"her. Hvis du bemærker at lydkortet ikke er det som faktisk er til stede på "
-"systemet, kan du klikke på knappen og vælge en anden driver."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Lydkort"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"Som en opsummering vil DrakX give dig en oversigt over information som den "
-"har indsamlet om dit system. Afhængig af det maskinel der er installeret på "
-"din maskine kan du have et eller flere af de følgende punkter. Hvert punkt "
-"består af den maskinelle enhed der skal konfigureres fulgt af en kort "
-"opsummering af den nuværende konfiguration. Klik på den tilsvarende \"%s\"-"
-"knap for at ændre på opsætningen.\n"
-"\n"
-" * \"%s\": Tjek at din tastaturopsætning er korrekt og ændr om nødvendigt.\n"
-"\n"
-" * \"%s\": Tjek det nuværende valg af land. Hvis du ikke er i dette land, så "
-"klik på \"%s\"-knappen og vælg et andet land. Hvis dit land ikke er i "
-"listen, så klik på \"%s\"-knappen for at få en fuldstændig liste over "
-"lande.\n"
-"\n"
-" ' \"%s\": Som standard bestemmer DrakX din tidszone ud fra hvilket land du "
-"har valgt. Du kan klikke på \"%s\" her, hvis dette ikke er korrekt.\n"
-"\n"
-" * \"%s\" :Tjek den nuværende museopsætning og klik på knappen for at ændre "
-"om nødvendigt.\n"
-"\n"
-" * \"%s\": Ved at klikke på \"%s\"-knappen åbnes printeropsætnings-\n"
-"hjælperen. Konsultér det tilhørende kapitel i begynderguiden for mere\n"
-"information om hvordan en printer kan sættes op. Grænsefladen som er vist\n"
-"i vores manual er magen til den som benyttes under installationen.\n"
-"\n"
-" * '%s': Hvis et lydkort er blevet fundet på dit system, vil det blive vist "
-"hér. Hvis du bemærker at lydkortet ikke er det som faktisk er til stede på "
-"systemet, kan du klikke på knappen og vælge en anden driver.\n"
-"\n"
-" * \"%s\": Hvis du har et TV-kort, så er det her at information om dets "
-"konfiguration bliver vist. Hvis du har et TV-kort som ikke er fundet, så "
-"klik på \"%s\" for at sætte det op manuelt.\n"
-"\n"
-" * \"%s\": Du kan klikke på \"%s\" for at ændre på parameterne til kortet, "
-"hvis du synes at konfigurationen er forkert.\n"
-"\n"
-" * \"%s\": Som standard vil DrakX opsætte din grafiske grænseflade i "
-"opløsningen 800x600 eller 1024x768. Hvis dette ikke passer dig, så klik på '%"
-"s'-knappen for at ændre på opsætningen.\n"
-"\n"
-" * \"%s\": Hvis du ønsker at konfigurere din adgang til internet eller "
-"lokalnet, kan du gøre dette nu. Kig i den trykte dokumentation eller brug "
-"Mandriva Linux Kontrolcenter efter installationen er afsluttet for at drage "
-"nytte af den fulde indbyggede vejledning. \n"
-"\n"
-" * \"%s\": lader dig konfigurere HTTP- og FTP-proxyadresser, hvis maskinen, "
-"du installerer på, skal placeres bag en proxyserver.\n"
-"\n"
-" * \"%s\": Du kan her ændre på sikkerhedsniveauet som defineret i et "
-"tidligere trin.\n"
-"\n"
-" * \"%s\": Hvis du skal koble din maskine direkte til internet, er det en "
-"god idé at beskytte sig mod indtrængning med en brandmur. Kig i det "
-"tilsvarende afsnit i Begyndervejledningen for detaljer om opsætning af "
-"brandmur.\n"
-"\n"
-" * \"%s\": Hvis du vil ændre på konfigurationen for opstartsindlæseren, så "
-"klik på denne knap. Dette bør forbeholdes avancerede brugere. Kig i den "
-"trykte dokumentation eller i den indbyggede hjælp om konfiguration af "
-"opstartsindlæser i Mandriva Linux Kontrolcenter.\n"
-"\n"
-" * \"%s\": her kan du fininstille hvilke tjenester som skal startes på din "
-"maskine. Hvis du skal bruge maskinen som server er det en god idé at "
-"gennemse denne opsætning."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Tidszone"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "TV-kort"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "ISDN-kort"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Grafisk grænseflade"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Netværk"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Proxyer "
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Sikkerhedsniveau"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Brandmur"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Systemopstarter"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Tjenester"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Vælg det diskdrev som du vil slette for at installere din nye Mandriva Linux "
-"partition. Vær forsigtig, alle data som er på denne partition vil gå tabt og "
-"vil ikke kunne genskabes!"
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Klik på '%s' hvis du ønsker at slette alle data og partitioner der ligger på "
-"dette diskdrev. Vær omhyggelig, efter klik på '%s' vil du ikke være i stand "
-"til at redde nogen data eller partitioner, der ligger på dette diskdrev, "
-"inklusive alle Windows data.\n"
-"Klik på '%s' for at stoppe denne handling uden at tabe nogen data og "
-"partitioner der er tilstede på dette diskdrev."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Næste ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Forrige"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Kunne ikke få adgang til kernemoduler svarende til din kerne (fil %s "
-"mangler), dette betyder normalt at din opstartsdiskette ikke stemmer overens "
-"med installationsmediet (lav en nyere opstartsdiskette)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Du skal også formatere %s"
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Har du andre supplerende medier?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-"De følgende medier er blevet fundet og vil blive brugt under installeringen: "
-"%s.\n"
-"\n"
-"\n"
-"Har du et supplerende installationsmedie der skal konfigureres?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "Cd-rom"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "Netværk (http)"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "Netværk (ftp)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "Indsæt CD 1 igen"
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Ingen enheder fundet"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "Indsæt CD'en"
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Kan ikke montere cdrom"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "URL på spejlet?"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Kan ikke finde hdlist-fil på dette spejl"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Skift din cdrom!\n"
-"Indsæt cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk på O.k., når det "
-"gjort."
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr "Kopiering udføres"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Du har valgt følgende servere: %s\n"
-"\n"
-"\n"
-"Disse servere er aktiveret som standard. De har ingen kendte "
-"sikkerhedsproblemer, men nogen nye kan blive fundet. I så tilfælde skal du "
-"opgradere så snart som mulig.\n"
-"\n"
-"\n"
-"Ønsker du virkelig at installere disse servere?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"De følgende pakker vil blive fjernet for at kunne opdatere systemet: %s\n"
-"\n"
-"\n"
-"Ønsker du virkelig at fjerne disse pakker?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fejl ved læsning af filen %s"
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "De følgende diske blev omdøbt:"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr "%s (tidligere kaldet %s)"
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Der er opstået en fejl - der kunne ikke findes nogen gyldige enheder, hvor "
-"der kan oprettes nye filsystemer. Undersøg din maskine for at finde årsagen "
-"til problemet"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr "Vælg et medie"
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr "Dårligt medie %s"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Fil eksisterer allerede. Skal den overskrives?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Kan ikke lave øjebliksbilleder før partitionering"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Øjebliksbilleder vil være tilgængelige efter installation i %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "System-installering"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Systemkonfiguration"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Noget maskinel på din maskine skal bruge ''proprietære'' drivere for at "
-"virke.\n"
-"Du kan finde information om dem hos: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Du skal have en rod partition. For at få dette, lav en ny partition (eller "
-"vælg en eksisterende).\n"
-"Vælg så kommandoen \"Monterings-sti\" og sæt den til `/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Du har ingen Swap partition\n"
-"\n"
-"Fortsæt alligevel?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Du skal have en FAT-partition monteret under /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Ikke nok fri plads til at tildele nye partitioner"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Brug eksisterende partition"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Der er ingen eksisterende partition der kan bruges"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Brug Windows partitionen til Loopback"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Hvilken partition vil du benytte som Linux4Win?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Vælg størrelserne"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Rod-partitions størrelse i Mb: "
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Swap-partitions størrelse i Mb: "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at  bruge som loopback (eller ikke nok plads "
-"tilbage)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Hvilken partition ønsker du at ændre størrelse på?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"Programmet til at ændre størrelse på FAT kan ikke behandle din partition, \n"
-"den følgende fejl opstod: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Beregner størrelsen på Windows-partitionen"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr "Din Windows partition er for fragmenteret, kør 'defrag' først"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ADVARSEL!\n"
-"\n"
-"DrakX vil nu ændre størrelsen på din Windows-partition. Vær forsigtig: denne "
-"operation er farlig. Hvis du ikke allerede har gjort det, bør du først gå ud "
-"af denne installation,  køre 'chkdsk c:' fra en kommandolinje under Windows "
-"(bemærk, det er ikke nok at køre det grafiske program 'scandisk', vær sikker "
-"på at køre 'chkdsk' i en kommandolinje!) og eventuelt defrag) og så "
-"genstarte installationen. Du bør også tage en sikkerhedskopi af dine data. "
-"Tryk på O.k., hvis du er helt sikker."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Hvilken størrelse ønsker du at at beholde Windows på?"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "partition %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Udregner Windows-filsystemets grænser"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT størrelsesændring mislykkedes: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Der er ingen FAT-partitioner at ændre størrelse på (eller ikke nok plads "
-"tilbage)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Fjern Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Du har mere end et diskdrev, hvilken ønsker du at installere Linux på?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle eksisterende partitioner og deres data vil gå tabt på drev %s"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Brug fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Du kan nu partitionere %s.\n"
-"Når du er færdig, så husk at gemme med 'w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Kan ikke finde plads til installering"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX partitionerings-vejlederen fandt de følgende løsninger:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partitionering mislykkedes: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Bringer netværket op"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Lukker netværket ned"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Introduktion\n"
-"\n"
-"Operativsystemet og de forskellige komponenter tilgængelige i Mandriva Linux "
-"distributionen vil herefter blive kaldt \"programmelprodukter\". "
-"Programmelprodukterne inkluderer, men er ikke begrænset til: samlingen af "
-"værktøjer, metoder, regler og dokumentation relateret til operativsystemet "
-"og de forskellige komponenter i Mandriva Linux-distributionen.\n"
-"\n"
-"\n"
-"1. Licensaftale\n"
-"\n"
-"Læs venligst dette dokument omhyggeligt. Dette dokument er en licensaftale "
-"mellem dig og Mandriva S.A., som gælder til disse programmelprodukter. Ved "
-"at installere, kopiere eller bruge disse programmelprodukter accepterer du "
-"udtrykkeligt og fuldt ud at følge denne licensaftale med dens betingelser og "
-"regler. Hvis du er uenig i nogensomhelst del af denne licens, har du ikke "
-"lovtil at installere, kopiere eller bruge disse programmelprodukter. Hvilket "
-"som helst forsøg på at installere, kopiere eller bruge disse "
-"programmelprodukter på en måde som ikke er i overensstemmelse med "
-"betingelserne og reglerne i denne licens er ugyldig og vil ophæve dine "
-"rettighedder under denne licens. Ved ophævelse af licensen skal du med det "
-"samme ødelægge alle kopier af programmelprodukterne.\n"
-"\n"
-"\n"
-"2. Begrænset garanti\n"
-"\n"
-"Programmelprodukterne og tilhørende dokumentation leveres \"som de er\", "
-"uden nogen form for garanti, i den udstrækning lov tillader. Mandriva S.A. "
-"vil under ingen omstændigheder efter hvad loven foreskriver være ansvarlig "
-"for specielle, tilfældige, direkte eller indirekte tab af nogen art "
-"(inkluderende uden begrænsninger, skader ved tab af forretning, "
-"forstyrrelser af forretning, finansielle tab, advokatbistand, erstatninger "
-"som resultat af en retssag eller nogen anden form for følgetab) opstået "
-"under brugen eller mangel på samme af disse programmelprodukter, selv hvis "
-"Mandriva S.A. er blevet gjort opmærksom på muligheden for eller "
-"indtræffelsen af sådanne skader.\n"
-"\n"
-"BEGRÆNSET ANSVAR MED HENSYN TIL REGLER OM BESIDDELSE ELLER BRUG AF FORBUDT "
-"PROGRAMMEL I VISSE LANDE\n"
-"\n"
-"I den udstrækning som loven tillader vil Mandriva S.A. eller deres "
-"distributører under ingen omstændigheder være ansvarlig for specielle, "
-"tilfældige, direkte eller indirekte tab af nogen art (inklusive uden "
-"begrænsninger skader ved tab af forretning, forstyrrelser af forretning, "
-"finansielle tab, advokatbistand, erstatninger som resultat af en retssag "
-"eller nogen anden form for tab) opstået ved besiddelse eller brug af "
-"programmelkomponenter eller opstået ved hentning af programmelkomponenter "
-"fra et af Mandriva Linux-webstederne som er forbudt eller begrænset i visse "
-"lande ved lokal lov. Dette begrænsede ansvar gælder, men er ikke begrænset "
-"til, de stærke krypteringskomponenter inkluderet i programmelprodukterne.\n"
-"\n"
-"\n"
-"3. GPL-licensen og relaterede licenser\n"
-"\n"
-"Programmelprodukterne består af komponenter lavet af forskellige personer "
-"eller enheder. De fleste af disse komponenter bliver reguleret efter "
-"vilkårene og aftalerne i GNU General Public License, herefter kaldet \"GPL"
-"\", eller lignende licenser. De fleste af disse licenser tillader dig at "
-"bruge, kopiere, tilpasse eller videredistribuere komponenterne, de dækker. "
-"Læs venligst vilkårene og betingelserne i licensaftalen for hver komponent "
-"omhyggeligt før du bruger den. Alle spørgsmål angående en komponent bedes "
-"adresseret til komponentens forfatter og ikke til Mandriva. Programmerne "
-"udviklet af Mandriva S.A. bliver reguleret efter GPL-licensen. "
-"Dokumentationen skrevet af Mandriva S.A. bliver reguleret efter en specifik "
-"licens. Referér venligst til dokumentationen for yderligere detaljer.\n"
-"\n"
-"\n"
-"4. Intellektuelle rettigheder\n"
-"\n"
-"Alle rettigheder til komponenterne i programmelproduktet tilhører deres "
-"respektive forfattere, og er beskyttet af intellektuelle rettigheds- og "
-"ophavsretslove, gældende for programmel. Mandriva S.A. forbeholder sine "
-"rettigheder til at ændre eller tilpasse programmelprodukterne, helt eller "
-"delvist, med alle midler og til alle formål. \"Mandriva\", \"Mandriva Linux"
-"\" samt de tilhørende logoer er varemærker for Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Styrende love\n"
-"\n"
-"Hvis dele af denne aftale bliver kendt ugyldig, ulovlig eller ubrugelig ved "
-"en domstolsafgørelse, vil disse dele blive ekskluderet fra denne kontrakt. "
-"Du vil forblive bundet af de andre gældende dele af aftalen. Vilkårene og "
-"aftalerne i denne licens er reguleret under fransk lov. Alle uenigheder "
-"vedrørende vilkårene i denne licens vil fortrinsvist blive løst udenfor "
-"domstolene. Som en sidste udvej vil uenighederne blive håndteret ved den "
-"rette domstol i Paris, Frankrig. Ved spørgsmål omkring dette dokument, "
-"kontakt venligst Mandriva S.A.  \n"
-
-# Mangler
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"Advarsel: Frit programmel er ikke nødvendigvis fri for patenter, og noget af "
-"det inkluderede frie programmel er muligvis dækket af patenter i dit land. "
-"For eksempel kan de inkluderede MP3-dekoder kræve en licens til yderligere "
-"brug (se http://www.mp3licensing.com for flere detaljer) Hvis du er usikker "
-"om et patent kan vedrøre dig, så tjek din lokale lovgivning."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Advarsel\n"
-"\n"
-"Læs venligst betingelserne nedenfor omhyggeligt. Hvis du ikke er enig i alt "
-"der står, må du ikke installere indholdet af CD-en. Tryk på 'Nægt'  for at "
-"fortsætte installationen uden disse cdrommer.\n"
-"\n"
-"\n"
-"Visse komponenter på den næste CD er ikke omfattet af GPL-licensen eller  "
-"andre lignende licenser. Hver enkelt komponent er derfor omfattet af  de "
-"betingelser der er beskrevet i dets egen licens.  Læs derfor venligst "
-"betingelserne omhyggeligt og følg de opstillede betingelser når du bruger og/"
-"eller videredistribuerer komponenterne. Sådanne licenser forhindrer normalt "
-"kopiering (sikkerhedskopiering undtaget),  videredistribuering, at folk "
-"skiller programmet ad, eller ændrer i komponenterne. Ethvert brud på "
-"licensen vil øjeblikkeligt fratage dig rettighederne beskrevet i den "
-"specifikke licens. Medmindre licensen giver dig lov hertil, vil det  normalt "
-"ikke være tilladt at installere programmet på mere end én maskine,  eller "
-"bruge det på et netværk. Hvis du er i tvivl, så kontakt venligst producenten "
-"af komponenten direkte. Overdragelse til tredjemand eller kopiering af "
-"sådanne komponenter inklusive  dokumentationen er normalt forbudt.\n"
-"\n"
-"\n"
-"Alle rettigheder til komponenterne på CD-en tilhører deres respektive "
-"skabere og er beskyttet af Lov om Ophavsret.\n"
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Tillykke, installationen er færdig.\n"
-"Fjern boot-mediet og tryk retur for at genstarte.\n"
-"\n"
-"\n"
-"For information om rettelser til denne udgivelse af Mandriva Linux, se "
-"Errata på:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information om konfigurering af dit system kan du finde i kapitlet om efter-"
-"installation i den Officielle Mandriva Linux Brugervejledning."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikér monterings-sti %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Nogle vigtige pakker blev ikke installeret rigtigt.\n"
-"Enten er dit cdrom-drev eller din cdrom fejlbehæftet.\n"
-"Tjek cdrom'en på en færdiginstalleret maskine ved brug af \"rpm -qpl media/"
-"main/*.rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Går til trin `%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Valg af pakkegrupper"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Total størrelse: %d / %d Mb"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Dårlig pakke"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Version: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Størrelse: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr " %d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Vigtighed: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Du kan ikke vælge/fravælge denne pakke"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "grundet manglende %s"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "grundet uopfyldt %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "prøver at forfremme %s"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "for at beholde %s"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"Du kan ikke vælge denne pakke, da der ikke er nok plads tilbage til at "
-"installere den"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "De følgende pakker vil blive installeret"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "De følgende pakker vil blive afinstalleret"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Dette er en nødvendig pakke, den kan ikke vælges fra"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Du kan ikke fravælge denne pakke. Den er allerede installeret"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Denne pakke skal opgraderes\n"
-"Er du sikker på at du vil fravælge den?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Du kan ikke fravælge denne pakke. Den skal opgraderes"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Vis automatisk valgte pakker"
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "Indlæs eller gem markering"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Opdaterer pakkevalg"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Minimal installation"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Vælg pakker som skal installeres"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Installerer"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Beregnes"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Ingen detaljer"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Resterende tid "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Vent venligst, forbereder installationen"
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d pakker"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Installerer pakke %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Nægt"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Skift din cdrom!\n"
-"Indsæt cdrom'en med navnet \"%s\" i dit cdrom-drev og tryk på O.k., når det "
-"gjort.\n"
-"Hvis du ikke har den så tryk på Annullér for at undgå installation fra denne "
-"cd."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Der opstod en fejl ved sorteringen af pakkerne:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Fortsæt alligevel?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Der opstod en fejl ved installeringen af pakkerne:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "ikke konfigureret"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-"De følgende installationsmedier er fundet.\n"
-"Hvis du ønsker at overspringe nogen af dem, kan du fravælge dem nu."
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-"Du har mulighed for at kopiere indholdet af cd-erne over på disken før "
-"installation.\n"
-"Installationen vil så fortsætte fra disken og pakkerne vil forblive "
-"tilgængelige, når systemet er fuldt installeret."
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr "Kopiér hele cd'er"
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Licensaftale"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr "Udgivelsesnoter"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Vælg dit tastaturlayout."
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Her er den komplette liste over tilgængelige tastaturer"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Installér/Opgradér"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Er dette en nyinstallation eller en opgradering?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Opgradér %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Krypteringsnøgle for %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Vælg muse-type."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Muse-port"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Vælg hvilken seriel port din mus er forbundet til."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Emulering af knapper"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulering af knap 2"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulering af knap 3"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfigurerer PCMCIA kort..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Konfigurerer IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "ingen ledige partitioner"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Skanner partitioner for at finde monteringspunkter"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Vælg monterings-stierne"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Det er ikke plads for 1 MB bootstrap! Installationen vil fortsætte, men for "
-"at starte dit system op, skal du lave en bootstrap partition i DiskDrake"
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Du skal lave en PPC PReP Boot bootstrap! Installationen vil fortsætte, men "
-"for at starte dit system op, skal du lave bootstrap-partitionen i DiskDrake"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Vælg partitioner der skal formateres"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Led efter beskadigede blokke?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Kontrol af filsystem %s mislykkedes. Ønsker du at reparere fejlene (bemærk, "
-"du kan miste data)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Ikke nok swap-plads til at gennemføre installationen, tilføj mere"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Leder efter tilgængelige pakker og genopbygger rpm-database..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Leder efter tilgængelige pakker"
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Leder efter pakker der allerede er installeret..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Leder efter pakker som skal opgraderes"
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Vælg det spejl hvorfra pakkerne skal hentes"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Dit system har ikke nok plads tilbage til en installation eller opgradering "
-"(%d > %d)"
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Vælg indlæs eller gem pakkevalg på diskette.\n"
-"Formatet er det samme som for auto_install-genererede filer."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Belastning"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Gem"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "Dårlig fil"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Valgt størrelse er større end tilgængelig plads"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Installationstype"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Du har ikke valgt nogen gruppe af pakker.\n"
-"Vælg den minimale installation du ønsker"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Med basal dokumentation (anbefalet!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Virkelig minimal installation (specielt ingen urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Alt"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Hvis du har alle cd'erne i listen nedenunder, klik O.k.\n"
-"Hvis du ikke har nogen af disse cd'er, klik Annullér.\n"
-"Hvis kun nogen cd'er mangler, fravælg dem, og klik så O.k."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cdrom med etikette '%s'"
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Forbereder installationen"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installerer pakke %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Konfiguration efter installation"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-"Forsikr dig venligst om at mediet med Opdateringsmodulerne er i drev %s"
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"Du har nu mulighed for at hente opdaterede pakker som er blevet opdateret\n"
-"efter distributionen blev gjort tilgængelig.\n"
-"\n"
-"Du vil få sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
-"internet-opkobling for at fortsætte.\n"
-"\n"
-"Ønsker du at installere opdateringerne?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontakter spejlet for at hente listen af tilgængelige pakker"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Kan ikke kontakte spejl: %s"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Vil du gerne prøve igen?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Hvad er din tidszone?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatisk tidssynkronisering (ved hjælp af NTP)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP-server"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Oversigt"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "System"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Udstyr"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Ekstern CUPS server"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Ingen printer"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Har du et ISA-lydkort?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Kør \"alsaconf\" eller \"sndconfig\" efter installation for at konfigurere "
-"dit lydkort"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Intet lydkort genkendt. Prøv at køre  \"harddrake\" efter installation"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Grafisk grænseflade"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Netværk og Internet"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "konfigureret"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Sikkerhed"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "aktiveret"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "deaktiveret"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Opstart"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s på %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Tjenester: %d aktiverede for %d registrerede"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
-"Du har ikke konfigureret X. Er du sikker på at du virkelig ønsker dette?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Forbereder opstarter..."
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Det virker som om du har en OldWorld eller ukendt maskine, yaboot "
-"opstartsindlæseren vil ikke virke for dig. Installationen vil fortsætte, men "
-"du skal bruge BootX eller en anden måde til at starte din maskine. Kernens "
-"parameter for root-filsystemet er: root=%s"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Ønsker du at bruge aboot?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fejl ved installation af aboot, \n"
-"forsøg at gennemtvinge installation selv om dette kan ødelægge den første "
-"partition?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"I dette er sikkerhedsniveau er adgang til Windows-partitionen forbeholdt "
-"administratoren."
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Indsæt en tom diskette i drev %s"
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Indsæt en anden diskette med drivere i diskette-drevet"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Laver autoinstallations-diskette"
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Nogen dele af installationen er ikke færdig\n"
-"\n"
-"Er du sikker på du ønsker du at lukke nu?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Autoinstallation kan ske fuldautomatisk hvis ønsket. I så tilfælde vil den "
-"overtage hele harddisken!! (dette er beregnet til at installere på en anden "
-"maskine).\n"
-"\n"
-"Du foretrækker måske at afspille installationen igen\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> mellem elementer  | <Space> vælger  | <F12> næste skærm "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Vælg en fil"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Tilføj"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Ændr"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Fjern"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Basal"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Afslut"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Lav"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Dårligt valg, prøv igen\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Dit valg? (standard %s) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Indgange som du skal udfylde:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Dit valg? (0/1, standard '%s') "
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Knap '%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Ønsker du at klikke på denne knap?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Dit valg? (standard '%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr " indtast 'void' for tom indgang"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Der er mange ting at vælge imellem (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Vælg det første tal i 10-området som du ønsker at redigere,\n"
-"Eller tryk retur for at fortsætte.\n"
-"Dit valg? "
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Bemærk, en etikette ændredes:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Indsend igen"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Tjekkisk (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Tysk"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Spansk"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Finsk"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Fransk"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norsk"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Polsk"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Russisk"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Svensk"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "Britisk"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "Amerikansk"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albansk"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Armensk (gammel)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Armensk (skrivemaskine)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Armensk (fonetisk)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Arabisk"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Azerbaidiansk (latin)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belgisk"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bengali (Inscript layout)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bengali (Probhat layout)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bulgarsk (fonetisk)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bulgarsk (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brasiliansk (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosnisk"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Hviderussisk"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Schweizisk (Tysk layout)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Schweizisk (Fransk layout)"
-
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Cherokee syllabic"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Tjekkisk (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Tysk (ingen døde taster)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanagari"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Dansk"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (US)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (esperanto)"
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (fransk)"
-
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (UK)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (norsk)"
-
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (polsk)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (svensk)"
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Dzongkha/tibetansk"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estisk"
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Færøsk"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Georgisk (russisk layout)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Georgisk (Latin layout)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Græsk"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Græsk (polytonisk)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Gujarati"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Gurmukhi"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Kroatisk"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Ungarsk"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Irsk"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Israelsk"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Israelsk (Fonetisk)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Iransk"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Islandsk"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Italiensk"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Inuktitut"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Japansk 106 taster"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kannada"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Koreansk tastatur"
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Kurdisk (arabisk skript)"
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Kyrgyz tastatur"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Latinamerikansk"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laotisk"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Litauisk AZERTY (gammel)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Litauisk AZERTY (ny)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Litauisk \"talrække\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauisk \"fonetisk\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Lettisk"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malayalam"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Makedonisk"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Myanmar (Burmesisk)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongolsk (kyrillisk)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Maltesisk (UK)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Maltesisk (US)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Hollandsk"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Oriya"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Polsk (polsk layout)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Polsk (polsk layout)"
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Pashto"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portugisisk"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Canadisk (Québec)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Russisk (qwertz)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Russisk (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Russisk (Fonetisk)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Samisk (norsk)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Samisk (svensk/finsk)"
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Sindhi"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Slovensk"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr "Sinhala"
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slovakisk (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slovakisk (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Serbisk (kyrillisk)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Syrisk"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Syrisk (fonetisk)"
-
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telugu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamil (ISCII-layout)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamil (skrivemaskine-layout)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Thailandsk (kedmanee)"
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Thailandsk (TIS-820)"
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Thailandsk (pattachote)"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr "Tifinagh (morokkisk type) (+latinsk/arabisk)"
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr "Tifinagh (fonetisk) (+latinsk/arabisk)"
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Tajik tastatur"
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Turkmen"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Tyrkisk (traditionel \"F\" model)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Tyrkisk (moderne \"Q\" model)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ukrainsk"
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Urdu-tastatur"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "Amerikansk (internaltionalt)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Uzbek (kyrillisk)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamesisk \"talrække\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Jugoslavisk (latinsk)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Højre alt-tast"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Begge taster samtidigt"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Kontrol- og skiftetaster samtidigt"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock-tast"
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Shift- og Capslock-taster samtidigt"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl- og alt-taster samtidigt"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt og Shift-taster samtidigt"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "'Menu'-tast"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Venstre Windows-tast"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Højre Windows-tast"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Begge kontrol-taster samtidigt"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Begge Alt-taster samtidigt"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Venstre skifte-tast"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Højre skifte-tast"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Venstre Alt-tast"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Venstre kontol-tast"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Højre kontrol-tast"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Her kan du vælge tasten eller tastekombinationen som \n"
-"lader dig skifte mellem forskellige tastaturlayouter\n"
-"(dvs latinsk eller ikke-latinsk)."
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"Denne indstilling vil blive aktiveret efter installationen.\n"
-"Under installationen skal du bruge den højre Ctrl-tast\n"
-"for at skifte mellem de forskellige tastaturudlægninger."
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andorra"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Forenede Arabiske Emirater"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua og Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albanien"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Armenien"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Hollandske Antiller"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antarktis"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Argentina"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Amerikansk Samoa"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Aserbajdsjan"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnien-Hercegovina"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbados"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesh"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bulgarien"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benin"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivia"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Bhutan"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet-øen"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Botswana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Hviderusland"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Belize"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokosøerne"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Congo (Kinshasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Centralafrikanske Republik"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Congo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Elfenbenskysten"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Cooks øer"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Chile"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Cameroun"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Kina"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Columbia"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Serbien & Montenegro"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Cuba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Kap Verde"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Juleøerne"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Cypern"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominica"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanske Republik"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Algeriet"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Egypten"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Vestlig Sahara"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Etiopien"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fiji"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandsøerne (Malvinas)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Mikronesien"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Færøerne"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gabon"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Storbritannien"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenada"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Georgien"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Fransk Guinea"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Ghana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Grønland"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gambia"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Guinea"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Guadeloupe"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ækvatorialguinea"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Syd-Georgia og Syd-Sandwich-øerne"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Guam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Guyana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Kina (Hong Kong)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard- og McDonald-øerne"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Kroatien"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haiti"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonesien"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Indien"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "British Indian Ocean Territory"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Irak"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Iran"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Island"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamaica"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Jordan"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenya"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgisistan"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Cambodja"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Comorerne"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Saint Kitts og Nevis"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Korea (Nord)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Korea"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Caymanøerne"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazakhstan"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Lagos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Sankt Lucia"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Liberia"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Litauen"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Letland"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Libyen"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Marokko"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monaco"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldova"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Marshalløerne"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Makedonien"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongoliet"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Nordmarianerne"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martinique"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Mauretanien"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malta"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Maldiverne"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malawi"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Mexico"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mocambique"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibia"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Ny Caledonien"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Niger"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk Øen"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepal"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauru"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Oman"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panama"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Peru"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Fransk Polynesien"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Ny Guinea"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Filippinerne"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Sankt Pierre og Miquelon"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palæstina"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palau"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Qatar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Réunion"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Rumænien"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Rwanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi-Arabien"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Salomonøerne"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Seychellerne"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sudan"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapore"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Sankt Helena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Slovenien"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard og Jan Mayen øerne"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senegal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somalia"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Surinam"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "São Tomé og Príncipe"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Syrien"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks- og Caicosøerne"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Tchad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "Franske sydlige territorier"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tadzjikistan"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Østtimor"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunesien"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tonga"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Tyrkiet"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad og Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzania"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ukraine"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Uganda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Fjerne, mindre øer, USA"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistan"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vatikansk"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Sankt Vincent og Grenadinerne"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Jomfruøerne (britiske)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Jomfruøerne (USA)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis og Futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoa"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Yemen"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayotte"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zambia"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabwe"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "Du bør ikke installere de følgende-pakker: %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Velkommen til %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirkulære monteringer %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Fjern de logiske delarkiver først\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Parametre"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "NONE"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Konfiguration af moduler"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Du kan konfigurere hver parameter for modulet her."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Fandt %s grænsesnit"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Har du én til?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Har du nogen %s grænsesnit?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Se info for maskinel"
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr "Installerer driver for USB-kort"
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Installerer driver for firewire-kort %s"
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Installerer driver for disk-styreenhed %s"
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Installerer driver for ethernet-styreenhed %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installerer driver for %s kort %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Du kan nu angive parametre til modul %s.\n"
-"Bemærk at alle adresser bør indtastes med foranstillet 0x, fx '0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Du kan nu sætte parametre til modulet %s.\n"
-"Parametrene er i formatet ``navn=værdi navn2=værdi2 ...''.\n"
-"F.eks., ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Modulindstillinger:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Hvilken %s driver skal jeg prøve?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"I nogen tilfælde behøver %s driveren at have ekstra information for at "
-"virke\n"
-"ordentligt, selv om den normalt virker fint uden. Ønsker du at angive "
-"ekstra\n"
-"parametre for den eller tillade driveren at sondere din maskine for\n"
-"den information den behøver? Af og til vil sondering stoppe maskinen, men "
-"burde\n"
-"ikke forårsage nogen skader."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Automatisk sondering"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Specificér parametre"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Indlæsning af modul %s mislykkedes.\n"
-"Ønsker du at prøve igen med andre parametre?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "et tal"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d kommaseparerede tal"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d kommaseparerede strenge"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "kommaseparerede tal"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "kommaseparerede strenge"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun-mus"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Standard"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Standard PS2 mus med hjul"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Automatisk"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking-mus"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 knap"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Standard 2-knaps mus"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Standard 3-knaps mus med hjul-emulering"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Hjul"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "seriel"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Standard 3-knaps mus"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan med hjul-emulering"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serien (seriel)"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Serien med hjul-emulering"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Serien"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mus (seriel, gammel C7 type)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech mus (seriel, gammel C7 type) med hjul-emulering"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking-mus med hjul-emulering"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "Busmus"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 knapper"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 knapper"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3 knapper med hjul-emulering"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Universiel"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Alle PS/2 & USB mus"
-
-#: mouse.pm:89
-#, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Xbox-Controller S"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "ingenting"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Ingen mus"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Synaptics museplade"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Test musen"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "For at aktivere musen,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "FLYT PÅ HJULET!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "brug PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "brug PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "brug DHCP"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel Speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr " - detekteret"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (der bruger PPPoA) USB"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (der bruger DHCP) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Lav forbindelse til Internettet"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"Den mest almindelige måde at forbinde med ADSL er pppoe.\n"
-"Nogen forbindelser bruger PPTP, og nogle få bruger DHCP.\n"
-"Hvis du ikke ved noget, vælg 'brug PPPoE'"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "ADSL-opkoblingstype"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Webserver"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Server for domænenavne (DNS)"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "SSH-server"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "FTP-server"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Postserver"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP- og IMAP-server"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Telnet-server"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr "Windows-fildeling (SMB)"
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "CUPS-server"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Echo-forespørgsel (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "BitTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"drakfirewall-konfigurator\n"
-"\n"
-"Dette konfigurerer en personlig brandmur for denne Mandriva Linux-maskine.\n"
-"For en stærk dedikeret brandmurs-løsning se venligst den specialiserede "
-"Mandriva Security Firewall-distribution."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"konfigurering med drakfirewall\n"
-"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect før du går videre."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Hvilke tjenester vil du tillade at Internettet kan koble op med?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Du kan angive diverse porte. \n"
-"Gyldige eksempler er: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Se /etc/services for information."
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Ugyldig port angivet: %s.\n"
-"Det korrekte format er 'port/tcp', \"port/udp' eller 'port/icmp', \n"
-"hvor port er mellem 1 og 65535.\n"
-"\n"
-"Du kan også angive et interval af porte (fx 24300:24350/udp)"
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Alt (ingen brandmur)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Andre porte"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "Ikke beskrevet - regigér manuelt"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Det ved jeg ikke"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Manuel"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr "Ingen enhed der understøtter %s ndiswrapper-driveren er til stede!"
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr "Vælg Windows-driveren (.inf-fil)"
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr "Kan ikke installere %s ndiswrapper-driveren!"
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr "Kan ikke indlæse ndiswrapper-modulet!"
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-"Den valgte enhed er allerede blevet konfigureret med %s-driveren.\n"
-"Ønsker du virkelig at bruge en ndiswrapper-driver ?"
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr "Kan ikke finde ndiswrapper-grænsefladen!"
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "Manuelt valg"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Internt ISDN-kort"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Manuel konfiguration"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Automatisk IP (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "Automatisk IP (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol for resten af verden"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Protokol for Europa (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokol for resten af verden \n"
-" ingen D-kanal (lejet linje)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel speedtouch USB-modem"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Sagem USB-modem"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Bewan PCI-modem"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "ECI Hi-Focus-modem"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Dynamic Host Configuration Protocol (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Manuel TCP/IP-konfiguration"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "Point to Point Tunneling Protocol (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP over Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP over ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr "DSL over CAPI"
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Bridged Ethernet LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Bridged Ethernet VC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "Rutet IP LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "Rutet IP VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Skript-baseret"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-baseret"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr "Åben WEP"
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr "Begrænset WEP"
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr "WPA Forud-delt nøgle"
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Konfigurér netværk og internet"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(detekteret på port %s)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(detekterede %s)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(detekteret)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "Lokalnet-konfiguration"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Trådløs forbindelse"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL opkobling"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Kabelforbindelse"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN-forbindelse"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Modem-forbindelse"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Vælg den opkobling, du ønsker at konfigurere"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Vi skal nu konfigurere opkoblingen '%s'.\n"
-"\n"
-"\n"
-"Tryk '%s' for at fortsætte."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Forbindelses-konfiguration"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Udfyld eller markér feltet nedenunder"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "Kort IRQ"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kort mem (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "Kort IO"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "Kort IO_0"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Dit personlige telefonnummer"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Navn på udbyder (f.eks. udbyder.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Udbyders telefonnummer"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "Udbyder DNS 1 (valgfri)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "Udbyder DNS 2 (valgfri)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Opringningsmåde"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Opkoblingshastighed"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Opkoblingens tidsudløb (i sekunder)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Konto-login (brugernavn)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Adgangskode for konto"
-
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr "Kabel: indstillinger for konto"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr "Brug BPALogin (nødvendigt for Telstra)"
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Vælg netværksgrænsesnit, der skal konfigureres:"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Net-enhed"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Eksternt ISDN modem"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Vælg en enhed!"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN konfiguration"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Hvad slags kort har du?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Hvis du har et ISA kort burde værdiene i næste billede være rigtige.\n"
-"\n"
-"Hvis du har et PCMCIA kort skal du vide irq og io for kortet.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Fortsæt"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Afbryd"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Hvilket af de følgende er dit ISDN-kort?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-"En CAPI-driver findes til dette modem. Denne CAPI-driver kan tilbyde flere "
-"faciliteter end den frie driver (såsom sending af faxer). Hvilken driver "
-"ønsker du at bruge?"
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Drivprogram"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Hvilken protokol ønsker du at bruge?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Vælg din udbyder.\n"
-" Hvis de ikke er i listen, vælg Ikke listet"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Udbyder: "
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Dit modem er ikke understøttet af systemet.\n"
-"Tag og kig på http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Vælg det modem, der skal konfigureres:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Angiv hvilken seriel port dit modem er forbundet til."
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Vælg din udbyder"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Indstillinger for konto til opkald"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Navn på forbindelsen"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Brugernavn"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "IP-parametre for opkald"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "IP-parametre"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP-adresse"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Undernetmaske"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Dialup: DNS-parametre"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Domænenavn"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Første DNS-server (valgfri)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Anden DNS-server (valgfri)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "Sæt værtsnavn ud fra IPadresse"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Gateway"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "IP-adresse på gateway"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "ADSL-konfiguration"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Vælg din ADSL-udbyder"
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"Du har brug for Alcatel-mikrokoden.\n"
-"Du kan komme med den nu på en diskette eller på en Windows-partition,\n"
-"eller overspringe dette og gøre det senere."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Brug en diskette"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Brug min Windows-partition"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Gør det senere"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "Kopiering af firmware mislykkeDES, filen %s ikke fundet"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "Kopiering af firmware færdig"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Du behøver alcatel mikrokoden.\n"
-"Hjemhent den fra\n"
-"%s\n"
-"og kopiér filen mgmt.o i /usr/share/speedtouch"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "Virtual Path ID (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "Virtual Circuit ID (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "Indpakning:"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"ECI Hi-Focus-modemmet kan ikke understøttes pga binær driver-"
-"distributionsproblem.\n"
-"\n"
-"Du kan finde en driver på http://eciadsl.flashtux.org/"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "Indlæs en driver manuelt"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr "Brug en Windows-driver (med ndiswrapper)"
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "Kunne ikke installerer pakken %s!"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Fremfinding af Zeroconf-værtsnavn"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Konfigurerer netværksenheden %s (driver %s)"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-"De følgende protokoller kan bruges til at konfigurere en LAN-forbindelse. "
-"Vælg venligst den forbindelse du gerne vil bruge"
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Indtast IP konfigurationen for denne maskine. Hvert felt skal udfyldes\n"
-"med en IP adresse i `dotted-decimal' notation (for eksempel 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Tildel værtsnavn fra DHCP-adresse"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "DHCP-værtsnavn"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Netmaske"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Følg id for netværkskort (nyttigt for bærbare)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Hotplugging af netværk"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Start ved opstart"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "Metrisk"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP-klient"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "DHCP-tidsudløb (i sekunder)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "Få DNS-servere fra DHCP"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr "Få YP-servere fra DHCP"
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr "Få NTPD-servere fra DHCP"
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP adresse bør have formatet 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Netmaske bør have formatet 255.255.224.0"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "Advarsel: IP-adresse %s er normalt reserveret!"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s er allerede i brug\n"
-
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Vælg en ndiswrapper driver"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr "Brug ndiswrapper-driveren %s"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr "Installér en ny driver"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr "Vælg en enhed:"
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "Indtast de trådløse parametre for dette kort:"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "Udførelsestilstand"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Ad-hoc"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Administreret (managed)"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Master"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Forlænger (repeater)"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Sekundær"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Auto"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Netværksnavn (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "Netværks-ID"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "Operationsfrekvens"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "Følsomhedstærskel"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Bitrate (i bit/s)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr "Krypteringstilstand"
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-"RTS/CTS tilføjer et håndtryk før hver pakketransmission for at være sikker "
-"på at\n"
-"kanalen er klar. Dette tilføjer overhead, men øger ydelsen i tilfælde med "
-"gemte\n"
-"noder eller stort antal med aktive noder. Denne parameter sætter størrelsen\n"
-"på den mindste pakke som noden sender RTS for; en værdi lig med den "
-"maksimale\n"
-"pakkestørrelse vil deaktivere denne fremgangsmåde. Du kan også sætte denne "
-"parameter til auto, fixed\n"
-"eller off."
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "Fragmentation"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "ekstra argumenter til Iwconfig kommando"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-"Her kan man konfigurere nogle ekstra trådløse parametre såsom:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick er allerede sat "
-"til værtsnavnet).\n"
-"\n"
-"Se iwconfig(8) man-siden for yderligere information."
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "ekstra argumenter til Iwspy-kommando"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-"Iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
-"netværksgrænseflade\n"
-"og for at læse tilbage kvalitet på en link for hver af dem.\n"
-"\n"
-"Denne information er den samme som den som er tilgængelig i /proc/net/"
-"wireless :\n"
-"kvalitet på link, signalstyrke og støjniveau.\n"
-"\n"
-"Se iwpspy(8) man-side for yderligere information."
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "ekstra argumenter til Iwpriv-kommando"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-"Iwpriv gør det muligt at opsætte valgfrie (private) parametre for en trådløs "
-"netværksgrænseflade.\n"
-"\n"
-"Iwpriv hånderer parametre og opsætning specifikt for hver driver (i "
-"modsætning til\n"
-"iwconfig som håndterer generelle).\n"
-"\n"
-"I teorien så bør dokumentationen for hver enhedsdriver indikere hvordan man "
-"bruger\n"
-"de grænsefladespecifikke kommandoer samt deres effekt.\n"
-"\n"
-"Se iwpriv(8) man-side for yderligere information."
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Frek bør have endelsen k, M or G (for eksempel, \"2.46G\" for 2.46 GHz "
-"frekvens), eller tilføj nok '0'."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Hastighed bør have endelsen k, M or G (for eksempel, \"11M\" for 11M), eller "
-"tilføj nok '0'."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Indtast domænenavn, værtsnavn og IP adressen for evt. ekstra navne-servere.\n"
-"Dit værtsnavn skal være et fuldt kvalificeret værtsnavn inklusive domæne,\n"
-"f.eks. minpc.mitfirma.dk. Hvis du ikke har nogen ekstra navne-servere,\n"
-"så lad navne-server-felterne være blanke."
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr "Sidst, men ikke mindst, indtast din DNS-servers IP-adresser."
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Værtsnavn (kan udelades)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Værtsnavn"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "DNS-server 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "DNS-server 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "DNS-server 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "domæne der søges i"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-"Som standard vil søge-domænet blive sat ud fra det fuldt angivne værtsnavn"
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (fx %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Gateway enhed"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Adresse på DNS-server skal have formatet 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway-adresse skal have formatet 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-"Om ønsket kan du indtaste et Zeroconf-værtsnavn.\n"
-"Dette er navnet som din maskine vil bruge til at annoncere alle sine\n"
-"delte ressourcer som ikke er styret af netværket.\n"
-"Dette er ikke nødvendigt på de fleste netværk."
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf-værtsnavn"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Zeroconf værtsnavn må ikke indeholde et ."
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Du har konfigureret flere måder at koble dig mod internet på.\n"
-"Venligst vælg den du ønsker at bruger.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Internet opkobling"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Konfiguration er færdig, ønsker du at effektuere indstillinger?"
-
-#: network/netconnect.pm:1439
-#, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Ønsker du at tillade brugere at starte din forbindelse?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Ønsker du at starte din forbindelse ved opstart?"
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "Automatisk ved opstart"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr "Ved brug af Net Applet i statusfeltet"
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr "Manuelt (grænsesnittet vil stadig blive aktiveret ved opstart)"
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Hvordan ønsker du at kalde denne forbindelse op?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Netværket skal være genstartet. Ønsker du at genstarte det?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Konfigurér netværk"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Et problem opstod ved genstart af netværket: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ønsker du at forsøge at skabe forbindelse til Internettet nu?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Tester din forbindelse..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Systemet er nu forbundet til Internettet."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Af sikkerhedsgrunde vil det blive afbrudt nu."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Det lader ikke til at dit system har forbindelse til Internettet.\n"
-"Prøv at omkonfigurere din forbindelse."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Tillykke, netværks- og internetkonfigurationen er færdig.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Derefter anbefaler vi at du genstarter dit X-miljø for\n"
-"at undgå problemer med det ændrede værtsnavn"
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Problemer indtraf under konfigurationen.\n"
-"Afprøv din forbindelse med net_monitor eller mcc. Hvis din forbindelse ikke "
-"virker, kan du prøve at genstarte konfigurationen."
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da du er i gang med en netværksinstallation er dit netværk allerede "
-"konfigureret.\n"
-"Klik OK for at beholde din konfiguration, eller annullér for at "
-"omkonfigurere din Internet- og netværksforbindelse.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-"En uventet fejl opstod:\n"
-"%s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Konfiguration af mellemvært (proxy)"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP-proxy"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP-proxy"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy skal være http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Url burde begynde med 'ftp:' eller 'http:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Brandmurkonfiguration fundet!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Advarsel! En eksisterende brandmurkonfiguration er blevet fundet. Du skal "
-"muligvis lave manuelle rettelser efter installationen."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"Indtast venligst navnet på grænsefladen som er koblet på internettet.\n"
-"\n"
-"Eksempler:\n"
-"\t\tppp+ for modem- eller DSL-opkoblinger, \n"
-"\t\teth0 eller eth1 for kabelopkobling eller ADSL-opkobling via "
-"lokalnetværk, \n"
-"\t\tippp+ for isdn-opkobling.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Indsæt diskette"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Indsæt en FAT-formateret diskette i diskette-drev %s med %s i rod-kataloget "
-"og tryk %s"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Fejl ved adgang til diskette, kan ikke montere enhed %s"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "montering mislykkedes: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Udvidet partition ikke understøttet på denne platform"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Du har plads tilovers i din partitionstabel, men jeg kan ikke udnytte den.\n"
-"Den eneste løsning er at flytte dine primære partitioner, således at\n"
-"\"hullet\" bliver placeret ved siden af de udvidede partitioner."
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Genskabning fra fil %s mislykkedes: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Fejl i sikkerhedskopien"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fejl ved skrivning til fil %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Noget slemt sker på dit drev. \n"
-"En test for at tjekke integriteten af data er mislykkedes. \n"
-"Dette betyder at alt på disken vil ende som tilfældige beskadigede data."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "skal have"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "vigtigt"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "meget rart"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "rart"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "måske"
-
-#: pkgs.pm:481
-#, c-format
-msgid "Downloading file %s..."
-msgstr "Henter filen %s..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(på %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(på denne maskine)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Konfigureret på andre maskiner"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "På CUPS-server '%s'"
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Print, Do not Queue"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Dæmon"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Common Unix Printing System (fjernserver)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "Ekstern CUPS"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Ukendt model"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Lokal printer"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Ekstern printer"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Printer på ekstern CUPS server"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Printer på ekstern lpd server"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netværksprinter (TCP/sokkel)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Printer på SMB/Windows 95/98/NT server"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Printer på en NetWare server"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Indtast en printerenheds-URI"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "kanalisér opgave ind i kommando"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "anbefalet"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Ukendt model"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "Konfigureret på denne maskine"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " på parallelport #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", USB printer #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", USB printer"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", HP-printer på en parallel port"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", HP printer på USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", HP-printer på HP JetDirect"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", HP-printer"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", multi-funktions-enhed på parallel port #%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", multi-funktions-enhed på en parallel port"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", multi-funktions-enhed på USB"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", multi-funktions-enhed på HP JetDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", multi-funktions-enhed"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", skriver til %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " på LPD-server \"%s\", printer \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP vært \"%s\", port %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " på Windows-server \"%s\", deling \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " på Novell-server \"%s\", printer \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", med kommando %s"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Parallelport #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "USB-printer \\/#%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "USB printer"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "HP-printer på en parallel port"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "HP-printer på USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "HP-printer på HP JetDirect"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "HP-printer"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Multi-funktions-enhed på parallel port #%s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "Multi-funktions-enhed på en parallel port"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "Multi-funktions-enhed på USB"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "Multi-funktions-enhed på HP JetDirect"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Multi-funktions-enhed"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Skriver på %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "LPD-server \"%s\", printer \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr "TCP/IP vært \"%s\", port %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "SMB/Windows-server \"%s\", fildeling \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Novell-server \"%s\", printer \"%s\""
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "Anvender kommando %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Rå printer (ingen driver)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Lokalnetværk"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Grænseflade '%s'"
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Netværk %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Vært %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (port %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"HP LaserJet 1000 skal have lagt sin firmware op efter at være blevet tændt. "
-"Hjemhent pakken med Windows-drivere fra HP's websted (firmwaren fra "
-"printerens CD virker ikke) og hiv firmware-filen ud af den ved at "
-"dekomprimere den selvudpakkende .exe-fil med 'unzip'-programmet og lede "
-"efter filen 'sihp1000.img'. Kopiér denne fil til kataloget '/etc/printer'. "
-"Dér vil den blive fundet af det automatiske oplæggerskript og lagt op hver "
-"gang printeren er sluttet til og tændt.\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "Konfiguration af CUPS-printere"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Her kan du vælge om printerne sluttet til denne maskine skal være "
-"tilgængelige fra eksterne maskiner, og fra hvilke eksterne maskiner."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Du kan også bestemme her om dine printere på eksterne maskiner bør være "
-"automatisk tilgængelige på denne maskine."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Printerne på denne maskine er tilgængelige for andre maskiner"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Find tilgængelige printere på eksterne maskiner automatisk"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Printerdeling på vært eller netværk:"
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Tilrettet konfiguration"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Ingen ekstern maskine"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Yderligere CUPS-servere: "
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"For at få adgang til eksterne CUPS-servere i dit lokale netværk behøver du "
-"bare at aktivere \"Find automatisk tilgængelige printere på eksterne maskiner"
-"\"-valget: CUPS-serverene informerer din maskine automatisk om printerne. "
-"Alle printerne som for øjeblikket er kendt af din maskine er listet i "
-"\"Fjern-printere\" sektionen i hovedvinduet til Printerdrake. Hvis din CUPS-"
-"server ikke er i dit lokale netværk, må du indtaste CUPS-servernes IP-"
-"adresser og evt. portnummeret for at få printer-information fra serverne."
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Printertilstand for japansk tekst"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Aktivering af dette vil muliggøre udskrift at rene tekstfiler på japansk. "
-"Brug kun denne funktion hvis du virkelig ønsker at udskrive tekst på "
-"japansk, hvis det er aktiveret kan du ikke længere udskrive bogstaver med "
-"accenter i latinske skrifttyper, og du vil ikke kunne tilpasse margenerne, "
-"tegnstørrelse mv. Denne indstilling vedrører kun printere defineret på denne "
-"maskine. Hvis du ønsker at udskrive japansk tekst på en printer der er sat "
-"op på en ekstern maskine, skal du aktivere denne funktion på denne eksterne "
-"maskine."
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatisk rettelse af CUPS-konfiguration"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Når denne valgmulighed er valgt, vil CUPS hver gang den starter forsikre sig "
-"om at\n"
-"\n"
-"- hvis LPD/LPRng er installeret, vil /etc/printcap ikke overskrives af CUPS\n"
-"\n"
-"- hvis /etc/cups/cupsd.conf mangler, vil den blive oprettet\n"
-"\n"
-"- når printerinformation rundsenDES, vil den ikke indeholde \"localhost\" "
-"som servernavn.\n"
-"\n"
-"Hvis nogen af disse ting giver dig problemer, så fjern denne valgmulighed, "
-"men da må du selv sørge for at disse punkter bliver overholdt."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr "Ekstern CUPS-server og ingen lokal CUPS-dæmon"
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "På"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Fra"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"I denne tilstand vil den lokale CUPS-dæmon være stoppet, og alle "
-"udskriftsanmodninger går direkte til serveren angivet nedenfor. Bemærk at "
-"det så ikke er muligt at definere lokale printkøer, og at hvis den angivne "
-"server er nede, så kan der slet ikke udskrives fra denne maskine."
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Deling af lokale printere"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Dette er maskinerne og netværkerne på hvilke de lokalt forbundne printere "
-"skal gøres tilgængelige:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Tilføj vært/netværk"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Redigér valgte vært/netværk"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Fjern valgte vært/netværk"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "IP-adresse på vært eller netværk:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Vælg netværket eller værten på hvilken de lokale printere skal gøres "
-"tilgængelige: "
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "IP-adresse på vært eller netværk mangler."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Den indtastede vært/netværk er ikke korrekt.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Eksempler på korrekte IP'er:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Denne vært eller dette netværk er allerede på listen, og kan ikke blive "
-"tilføjet igen.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Tilgår printere på eksterne CUPS-servere"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Tilføj hér de CUPS-servere hvis prontere du ønsker at bruge. Du behøver kun "
-"gøre dette, hvis serverne ikke rundkaster deres printerinformation på "
-"lokalnetværket."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Tilføj server"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Redigér valgte server"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Fjern valgte server"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Indtast IP-adresse og port på værten, hvis printere du ønsker at bruge."
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Hvis ingen port er angivet, vil port 631 blive brugt som standard."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "Server-IP mangler!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Den indtastede IP er ikke korrekt.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Port-nummeret bør være et heltal!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Denne server er allerede på listen, og kan ikke blive tilføjet igen.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "På, navn eller IP på fjernserver"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "CUPS-servernavn eller IP-adresse mangler."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Læser printerdata ..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Genstarter CUPS..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Vælg printer-forbindelse"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Hvordan er printeren tilsluttet?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Eksterne CUPS-servere behøves ikke at blive konfigureret her: \n"
-"disse printere vil automatisk blive fundet."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"ADVARSEL: Ingen lokal netværksopkobling aktiv; fjerne printere kan derfor "
-"ikke blive opdaget eller testet!"
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-"Automatisk identifikation af printere (Lokal, TCP/Socket,SMB-printere og URI "
-"for enhed)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr "Ændr tidsudløb på automatisk findning af netværksprinter"
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-"Angiv tidsudløb for automatisk genkendelse af netværksprintere her (i "
-"millisekunder)."
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-"Jo længere du vælger tildsudløbet til at være, des mere pålideligt vil "
-"genkendelsen af netværksprinterne blive, men søgningen kan så vare længere, "
-"især hvis der er mange maskiner med lokale brandmure på netværket. "
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Tidsudløbet skal være et positivt tal!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Tjekker dit system..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "og en ukendt printer"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "og %d ukendte printere"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"De følgende printere\n"
-"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"De følgende printere\n"
-"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Den følgende printer\n"
-"\n"
-"%s%s\n"
-"er direkte tilsluttet til dit system"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Der findes en ukendt printer direkte tilsluttet til dit system"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Der findes %d ukendte printere direkte tilsluttet til dit system"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-"Der blev ikke fundet nogen printere som er direkte tilsluttede til din "
-"maskine"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Forsikr dig om at alle dine printere er tilsluttede og tændte).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Vil du aktivere udskrift på printerne som nævnes ovenfor eller på printerne "
-"i det lokale netværk?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Vil du aktivere udskrift på printerne i det lokale netværk?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Vil du aktivere udskrift på printerne som nævnes ovenfor?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Er du sikker på at du vil opsætte udskrift på denne maskine?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"Bemærk: Afhængig af printermodel og udskriftssystem vil op til %d MB "
-"yderligere programmel blive installeret."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Søger efter nye printere..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "Fandt printer på %s..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " på "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Valg af printermodel"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Hvilken printermodel har du?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"Printerdrake kunne ikke finde ud af hvilken model din printer %s er. Vælg "
-"venligst den korrekte model fra listen."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Hvis din printer ikke er listet, så vælg en kompatibel (se printermanual) "
-"eller en lignende printer."
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "Konfigurerer printer på %s..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigurerer printer '%s'..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Tilføj en ny printer"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Velkommen til vejlederen for printeropsætning\n"
-"\n"
-"Denne vejleder lader dig installere lokale eller eksterne printere som skal "
-"bruges fra denne maskine, og også fra andre maskiner i netværket.\n"
-"\n"
-"Den spørger dig om alle nødvendige oplysninger til at opsætte printere og "
-"giver dig adgang til alle tilgængelige printerdrivere, drivermuligheder og "
-"opkoblingstyper for printere."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine, direkte "
-"til netværket eller til en ekstern Windows-maskine.\n"
-"\n"
-"Tilslut og tænd venligst alle printere opkoblet til denne maskine så de kan "
-"identificeres automatisk. Netværksprinterne og Windows-maskinerne skal også "
-"være tilsluttede og tændte.\n"
-"\n"
-"Bemærk at det tager længere tid at identificere netværksprintere end at "
-"identificere lokalt tilsluttede printere. Så deaktivér autoidentifikation af "
-"netværksprintere og/eller printere sluttede til Windows-maskiner hvis du "
-"ikke har brug for dette.\n"
-"\n"
-"Klik på \"Næste\" hvis du er klar og på \"Annullér\" hvis du ikke vil "
-"installere printere nu."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine.\n"
-"\n"
-"Tilslut og tænd venligst alle printere tilsluttet denne maskine nu så de kan "
-"identificeres automatisk.\n"
-"\n"
-"Klik på \"Næste\" når du er klar og på \"Annullér\" hvis du ikke vil "
-"installere printere nu."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine eller "
-"direkte til netværket.\n"
-"\n"
-"Hvis du har printere sluttet til denne maskine, så tilslut og tænd dem nu så "
-"de kan identificeres automatisk. Netværksprinterne skal også være "
-"tilsluttede og tændte.\n"
-"\n"
-"Bemærk at det tager længere tid at identificere netværksprintere end at "
-"identificere lokalt tilsluttede printere. Så deaktivér autoidentifikation af "
-"netværksprintere hvis du ikke har brug for dette.\n"
-"\n"
-"Klik på \"Næste\" hvis du er klar og på \"Annullér\" hvis du ikke vil "
-"installere printere nu."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Velkommen til guiden for printerinstallation\n"
-"\n"
-"Denne guide lader dig installere printere sluttet til denne maskine.\n"
-"\n"
-"Hvis du har printere sluttet til denne maskine, så tilslut og tænd dem nu så "
-"de kan identificeres automatisk.\n"
-"\n"
-"Klik på \"Næste\" hvis du er klar og på \"Annullér\" hvis du ikke vil "
-"installere printere nu."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Auto-opdagelse af printere tilsluttet denne maskine"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Auto-opdagelse af printere tilsluttet direkte til det lokale netværk"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Auto-opdagelse af printere tilsluttet maskiner der køre Microsoft Windows"
-
-#: printer/printerdrake.pm:1151
-#, c-format
-msgid "No auto-detection"
-msgstr "Ingen automatisk detektion"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Tillykke, din printer er nu installeret og konfigureret!\n"
-"\n"
-"Du kan udskrive med 'Udskriv'-kommandoen i dit program (normalt i 'Filer'-"
-"menuen).\n"
-"\n"
-"Hvis du ønsker at tilføje, fjerne eller omdøbe en printer, eller hvis du "
-"ønsker at ændre på standard-indstillingerne (papirbakke, printkvalitet ...), "
-"så vælg 'Printer' i 'Udstyr'-afsnittet i %s Kontrolcentret."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "Kunne ikke installere %s-pakkerne!"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr "Overspringer automatisk oppdagelse af Windows/SMB-server"
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Auto-opdagelse af printere"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Detekterer enheder..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", netværksprinter \"%s\", port %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", printer \"%s\" på SMB/Windows-server \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "Fandt %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Printer på parallel port #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netværksprinter '%s', port %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Printer '%s' på SMB/Windows server '%s'"
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Lokal printer"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Ingen lokal printer fundet! For at installere en printer i hånden skal du "
-"indtaste et enhedsnavn/filnavn i inddatalinjen (parallelporte: /dev/lp0, /"
-"dev/lp1  ..., svarende til LPT1:, LPT2: ..., første USB-printer: /dev/usb/"
-"lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Du skal indtaste en enhed eller et filnavn!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Ingen printer fundet!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Lokale printere"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Tilgængelige printer"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "De følgende printere blev fundet automatisk:"
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Hvis det ikke er den du ønsker at opsætte så indtast et enhedsnavn/filnavn "
-"på inddatalinjen"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "Alternaltivt kan du angive et enhedsnavn/filnavn på inddatalinjen"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Her er en liste med alle autodetekterede printere. "
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Angiv hvilken printer dine udskriftsopgaver skal gå til, eller indtast et "
-"enhedsnavn/filnavn på inddatalinjen"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Angiv hvilken printer som udskriftsopgaverne skal gå til eller indtast et "
-"enhedsnavn/filnavn på inddatalinjen"
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Konfigurationen af printeren vil ske helt automatisk. Hvis din printer ikke "
-"blev fundet korrekt eller hvis du foretrækker en tilpasset "
-"printerkonfiguration, så slå 'Manuel konfiguration' til."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Der er for nærværende ingen alternative muligheder"
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Vælg den printer du ønsker at opsætte. Konfigurationen af printeren vil ske "
-"fuldstændigt automatisk. Hvis din printer ikke blev fundet korrekt eller "
-"hvis du foretrækker en tilpasset printerkonfiguration, så slå 'Manuel "
-"konfiguration' til."
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Angiv hvilken printer som udskriftsopgaverne skal gå til."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Angiv hvilken port din printer er forbundet til eller indtast et enhedsnavn/"
-"filnavn på inddatalinjen"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Angiv hvilken port din printer er forbundet til."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(parallelporte: /dev/lp0, /dev/lp1  ..., svarende til LPT1:, LPT2: ..., "
-"første USB-printer: /dev/usb/lp0, 2. USB-printer: /dev/usb/lp1 ...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Du skal vælge eller indtaste en printer/enhed!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "Afbryder"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Parametre til ekstern lpd"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"For at bruge en ekstern printer, skal du opgive værtsnavnet\n"
-"for printerserveren og navnet på printeren på denne server."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Eksternt værtsnavn"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Eksternt printernavn"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Eksternt værtsnavn mangler"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Det eksterne værtsnavn mangler!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Informationer"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Fandt model: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Skanner netværk ..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", printer \"%s\" på server \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Printer \"%s\" på server \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT)-printer indstillinger"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"For at skrive til en SMB printer skal du angive værtsnavnet på SMB maskinen "
-"(bemærk at dette navn kan være forskelligt fra TCP/IP-navnet!) og muligvis "
-"IP-adressen på printerserveren, så vel som delenavnet for printeren du vil "
-"bruge samt nødvendig information om brugernavn, adgangskode og arbejdsgruppe."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Hvis den ønskede printer blev fundet, så vælg den fra listen og tilføj "
-"dernæst brugernavn, adgangskode og/eller arbejdsgruppe om nødvendigt."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "SMB-servervært"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB-serverens IP"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Dele-navn"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Arbejdsgruppe"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Auto-detekteret"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Enten servernavnet eller serverens IP skal angives!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Samba-delenavn mangler!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SIKKERHEDSADVARSEL!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Du er ved at opsætte udskrivning til en Windows-konto med adgangskode. "
-"Grundet en fejl i arkitekturen af Sambas klientprogrammel bliver "
-"adgangskoden lagt i klar tekst i Samba-klientens kommandolinje, som bruges "
-"til at sende printjobbet til Windows-serveren. Så det er muligt for enhver "
-"bruger på denne maskine at vise adgangskoden på skærmen ved at angive "
-"kommandoer som 'ps auxwww'.\n"
-"\n"
-"Vi anbefaler at bruge en af de følgende alternativer (i alle tilfælde skal "
-"du forsikre dig om at kun maskiner fra dit lokalnetværk har adgang til din "
-"Windows-server, for eksempel ved hjælp af en brandmur):\n"
-"\n"
-"Brug en konto uden adgangskode på din Windows-server, såsom 'GUEST'-kontoen "
-"eller en speciel konto som kun anvendes til udskrift. Fjern ikke "
-"adgangskodebeskyttelsen fra en personlig konto eller en administrator-"
-"konto.\n"
-"\n"
-"Opsæt din Windows-server så printeren er tilgængelig under LPD-protokollen. "
-"Opsæt dernæst udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Opsæt din Windows-server til at gøre printeren tilgængelig under IPP-"
-"protokollen, og opsæt udskrift fra denne maskine med '%s'-opkoblingstypen i "
-"Printerdrake.\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Forbind din printer til en Linux-server og lad dine Windows-maskiner "
-"tilslutte sig til den som klienter.\n"
-"\n"
-"Ønsker du virkelig at fortsætte med at opsætte din printer som du gør nu?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare printer-parametre"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"For at skrive til en NetWare printer skal du angive navnet på NetWare "
-"printerserveren (bemærk at dette navn kan være forskelligt fra TCP/IP-"
-"navnet!) såvel som kønavnet for den printer du vil benytte samt om "
-"nødvendigt et brugernavn og en adgangskode."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Printer-server"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Printerkø-navn"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "NCP-servernavn mangler!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP-kønavn mangler!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", vært \"%s\", port %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Vært \"%s\", port %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Sokkel-printer-parametre"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Vælg en af de fundne printere fra listen eller angiv værtsnavnet eller IP-"
-"adressen og eventuelt portnummer (standard er 9100) i indtastningsfelterne."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"For at skrive til en TCP eller sokkel-printer skal du angive værtsnavnet "
-"eller IP-adressen på printeren, og eventuelt portnummer (standard er 9100). "
-"På HP JetDirect-servere er portnummeret normalt 9100, på andre servere "
-"varierer det. Tjek manualen for dit udstyr."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Værtsnavn eller IP-adresse på printer mangler!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Værtsnavn eller IP-adresse på printer mangler!"
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Opfrisker URI-liste over enheder..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "Printer-enheds URI"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Du kan direkte opgive URI til printeren. URIen skal være i henhold til enten "
-"CUPS- eller Foomatic-standarden. Bemærk at ikke alle typer URIer "
-"understøttes af alle kø-behandlere."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "En korrekt URI skal opgives!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "kanalisér ind i kommando"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Her kan du angive en vilkårlig kommandolinje som jobbet skal kanaliseres ind "
-"i i stedet for at blive sendt direkte til en printer."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Kommandolinje"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "En kommandolinje skal opgives!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-"På mange HP-printere er der specialfunktioner, såsom vedligeholdelse (tjek "
-"af blækniveau, rensing af printdysse, justering af hoved, ...) på alle ikke "
-"alt for gamle inkjet-printere, skanning på multi-funktionsenheder, og adgang "
-"til hukommelseskort på printere med kortlæsere.  "
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-"For at få adgang til disse ekstra funktioner på din HP-printer skal den "
-"sættes op med det nødvendige programmel."
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-"Enten med den nyere HPLIP som giver mulighed for printer-vedligeholdelse via "
-"det letanvendelige grafiske program 'Toolbox' og firkantet blødende på nyere "
-"PhotoSmart-modeller "
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-"eller med den ældre HPOJ, som kun giver mulighed for adgang til skanner og "
-"hukommelseskort, men som kan være til hjælp, hvis HPLIP fejler."
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr "Hvad er dit valg (Vælg 'Ingenting' for printere,der ikke er fra HP)?"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Er din printer en multi-funktionenhed fra HP eller Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 med skanner, DeskJet 450, Sony "
-"IJP-V100), en HP PhotoSmart eller en HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Installerer %s-pakke..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr "Kun udskrift vil være mulig på %s."
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr "Kunne ikke fjerne din gamle HPOJ-konfigurationsfil '%s' for din %s! "
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr "Fjern venligst filen manuelt, og genstart HPOJ."
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Tjekker enhed og konfigurerer %s..."
-
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Hvilken printer ønsker du at sætte op med HPLIP?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Installerer SANE-pakker..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr "Skanning på %s vil ikke være mulig."
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr "Brug og vedligeholdelse af din %s"
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Installerer mtools-pakker..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "Adgang til fotohukommelseskort på %s vil ikke være muligt."
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Skanning på din HP-multifunktionsenhed"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Adgang til fotohukommelseskort på din HP-multifunktionsenhed"
-
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr "Konfigurerer enhed..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Gør printerport tilgængelig for CUPS..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Læser database over printere ..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Indtast printernavn og kommentarer"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Navn på printer bør kun indeholde bogstaver, tal og understregen _"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Printeren \"%s\" eksisterer allerede,\n"
-"ønsker du virkelig at overskrive dens konfiguration?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-"Printernavnet \"%s\" er på mere end 12 tegn, hvilket kan bevirke at "
-"printeren er utilgængelig fra Windows-klienter. Ønsker du virkelig at bruge "
-"dette navn?"
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Alle printere behøver et navn (f.eks. 'printer').\n"
-"Beskrivelsen og lokaliseringsfelterne behøver ikke \n"
-"udfyldes. De er kommentarer til brugerne."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Navn på printer"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Beskrivelse"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Placering"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Forbereder printerdatabase: ..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Din printermodel"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Printerdrake har sammenlignet modelnavnet fra den automatiske genkendelse af "
-"printeren med modellerne listet i dens printerdatabase for at finde den "
-"bedste match. Dette valg kan være forkert, især når din printer slet ikke er "
-"listet i databasen. Så tjek om valget er korrekt og klik \"Modellen er "
-"korrekt\" hvis den er, og hvis ikke så klik \"Vælg model manuelt\" så du kan "
-"udvælge din printermodel manuelt på den næste skærm.\n"
-"\n"
-"Som din printer har Printerdrake fundet:\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Modellen er korrekt"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Vælg model manuelt"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Tjek venligst om Printerdrake udførte \n"
-"autodetekteringen af din printermodel\n"
-"korrekt. Find den korrekte model i listen\n"
-"når en forkert model, eller 'Rå printer' er fremhævet."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "Installér en producent-leveret PPD-fil"
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-"Alle PostScript-printere leveres med en PPD-fil, som beskriver printerens "
-"valgmuligheder og faciliteter."
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"Denne fil findes som regel et eller andet sted på cd'en sammen med Windows- "
-"eller MAC-drivere leveret med printeren."
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr "Du kan også finde PPD-filerne på producentens websteder."
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"Hvis du har Windows installeret på din maskine, så kan du også finde PPD-"
-"filen på din Windows-partition."
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-"Installerer skriverens PPD-fil og bruger den, mens den opsætter printeren så "
-"alle valg til printeren vil være tilgængelig via printerens hardware"
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"Her kan du vælge PPD-filen som skal installeres på din maskine, den vil så "
-"blive brugt til opsætningen af din printer."
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "Installér PPD-fil fra"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "Diskette"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "Andet sted"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "Vælg PPD-fil"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "PPD-filen %s eksisterer ikke eller kan ikke læses!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "PPD-filen %s følger ikke PPD-specifikationerne!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "Installerer PPD-fil..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI konfiguration af winprinter"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Du konfigurerer en OKI laser-winprinter. Disse printere bruger en meget "
-"speciel kommunikationsprotokol og derfor virker de kun når de er forbundet "
-"til den første parallelle port. Når din printer er forbundet til en anden "
-"port eller til en printserverboks, så forbind printeren til den første "
-"parallelle port før du udskriver en prøveside. Ellers vil printeren ikke "
-"virke. Din opsætning af forbindelsestype vil blive ignoreret af driveren."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark inkjet konfiguration"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Printerdriverne til inkjet som leveres af Lexmark understøtter kun lokale "
-"printere, ikke printere på eksterne maskiner eller printserverbokse. Forbind "
-"din printer til en lokal port eller konfigurér den på den maskine, den er "
-"forbundet til."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"For at kunne udskrive på din Lexmark inkjet fra denne konfigurering skal du "
-"bruge inkjet printerdriverne leveret af Lexmark (http://www.lexmark.com/). "
-"Klik på 'Drivers'-knappen. Vælg så din model og derefter 'Linux' som "
-"operativsystem. Driverne kommer som RPM-pakker eller skal-skripter med "
-"interaktiv grafisk installation. Du behøver ikke lave denne konfiguration "
-"via de grafiske grænseflader. Annullér direkte efter licensaftalen. Udskriv "
-"derefter justeringssider for skrivehovedet med 'lexmarkmaintain', og justér "
-"opsætningen af justeringen af hovedet med dette program."
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Lexmark X125-konfiguration"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Denne printerdriver understøtter kun printere der er forbundet lokalt via "
-"USB, ikke printere på eksterne maskiner eller printserverbokse. Forbind din "
-"printer til en lokal USB-port eller konfigurér den på den maskine, den er "
-"forbundet til."
-
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Samsung ML/QL-85G konfiguration"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Denne printerdriver understøtter kun printere der er forbundet lokalt på den "
-"første parallelle port, ingen printere på eksterne maskiner eller "
-"printserverbokse eller andre parallelle porte.. Forbind din printer til den "
-"første parallelle port eller konfigurér den på den maskine, den er forbundet "
-"til."
-
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Canon LBP-460/660 konfiguration"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Oplægning af firmware for HP LaserJet 1000"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standardprinterens indstillinger\n"
-"\n"
-"Du bør tjekke at sidestørrelsen og blæktypen/udskriftstilstanden (hvis til "
-"stede) og også konfigurationen af laserprinterudstyr (hukommelse, duplex-"
-"enhed, ekstra bakker) er sat rigtigt. Bemærk at en meget god "
-"udskriftskvalitet kan gøre udskriften betydeligt langsommere."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Standardindstillinger for printer"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Valg %s skal være et helt tal!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Valg %s skal være et tal!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Valg %s er udenfor område!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ønsker du fremover at bruge printeren \"%s\"\n"
-"som standard?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Testsider"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Vælg testsiderne du ønsker at udskrive.\n"
-"Bemærk: fototestsiden kan tage ret lang tid at skrive ud, og på "
-"laserprintere med for lidt hukommelse vil den måske ikke skrives ud i det "
-"hele taget. Som regel vil det være nok at udskrive standard-testsiden."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Ingen testsider"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Udskriv"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Standard testside"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternativ testside (letter)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternativ testside (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Fototestside"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Udskriv ikke nogen testsider"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Udskriver testsider..."
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr "Overspringer fototestside."
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Testsider er blevet sendt til printeren.\n"
-"Dette kan tage lidt tid før printeren starter.\n"
-"Udskrivningsstatus:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Testsider er sendt til printeren.\n"
-"Det kan tage lidt tid før printeren starter.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Fungerer det korrekt?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Rå printer"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"For at skrive en fil fra kommandolinjen (terminalvinduet) kan du enten bruge "
-"programmet '%s <fil>' eller et grafisk printerværktøj: 'xpp <fil>' eller "
-"'kprinter <fil>'. De grafiske værktøjer lader dig vælge printeren og ændre "
-"indstillingerne på en nem måde.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Disse kommandoer kan du også bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"'%s'-kommandoen tillader også ændring af indstillingsmulighederne for et "
-"bestemt udskriftsjob. Tilføj blot de ønskede indstillinger til "
-"kommandolinjen, fx '%s <fil>\". "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Hvilke muligheder der er for den aktuelle printer kan du enten læse på "
-"listen vist nedenfor, eller klikke på knappen 'Liste med printermuligheder'.%"
-"s%s%s\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Her er en liste over tilgængelige printmuligheder for den aktuelle printer:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>'.\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Denne kommando kan du også bruge fra 'udskrivningskommando'-feltet i "
-"udskriftsdialogerne i mange programmer, men lad være med at angive filnavnet "
-"her, fordi filen der skal udskrives leveres af programmet.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"For at få en liste af tilgængelige muligheder for den aktuelle printer kan "
-"du klikke på knappen 'Liste med printermuligheder'."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"For at udskrive en fil fra kommandolinjen (terminalvinduet) brug da "
-"kommandoen '%s <fil>' eller '%s <fil>'.\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Du kan også bruge den grafiske grænseflade 'xpdq' til at sætte "
-"valgmuligheder og behandle udskriftsopgaver.\n"
-"Hvis du bruger KDE som skrivebordsmiljø, har du en 'panik-knap', en ikon på "
-"skrivebordet, benævnt med 'STOP printer!', som stopper alle udskriftsopgaver "
-"øjeblikkeligt når du klikker på den. Dette er fx nyttigt hvis papiret "
-"krøller sammen.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"'%s'- og '%s'-kommandoerne tillader også ændring af indstillingsmulighederne "
-"for et bestemt udskriftsjob. Tilføj blot de ønskede indstillinger til "
-"kommandolinjen, fx '%s <fil>'.\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Udskriver/Skanner/Fotokort på '%s'"
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Udskriver/Skanner på '%s'"
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Udskriver/Adgang til fotokort på '%s'"
-
-#: printer/printerdrake.pm:3896
-#, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Bruger eller vedligeholder printeren '%s'"
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Udskriver på printeren '%s'"
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Liste med printermuligheder"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-"Din %s er sat op med HP's HPLIP driverprogrammel. På denne måde vil mange "
-"særlige faciliteter være understøttet for din printer.\n"
-"\n"
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-"Skanneren i din printer kan bruges med det almindelige SANE-programmel, for "
-"eksempel Kooka eller XSane (Begge i Multimedie/grapfik-menuen). "
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-"Kør Scannerdrake (Udstyr/skanner i Mandriva Linux Kontrolcenter) for at dele "
-"din skanner på netværket.\n"
-"\n"
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-"Hukommelseskortlæserne i din printer kan du få adgang til som en normal USB-"
-"lagerenhed. "
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-"Efter indsættelse af et kort bør et ikon med en disk blive vist pådit "
-"skrivebord.\n"
-"\n"
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-"Hukommelseskortlæserne på din printer kan du få adgang til via HP's Printer "
-"Toolbox (Menu: System/overvøgning/HP Printer Toolbox) ved at klikke på "
-"\"Adgang til fotokort...\" knappen på \"Funktioner\" fanen. "
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-"Bemærk at dette er meget langsomt, læsning af billederne fra kameraet eller "
-"en USB-kortlæser er normalt hurtigere.\n"
-"\n"
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-"HP's Printer Toolbox (Menu: System/Overvågning/HP Printer Toolbox) tilbyder "
-"en masse overvågning af status og vedligeholdelsesfunktioner for din %s:\n"
-"\n"
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr " - Blækniveau/status info\n"
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr " - Rensning af blækdysse\n"
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr " - Justering af printhoved\n"
-
-#: printer/printerdrake.pm:3944
-#, c-format
-msgid " - Color calibration\n"
-msgstr " - Farve-indstilling\n"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"Din multifunktionsenhed blev konfigureret automatisk til at kunne skanne. Nu "
-"kan du skanne med 'scanimage' ('scanimage -d hp:%s' for at angive skanneren "
-"hvis du har mere end én) fra kommandolinjen eller med de grafiske "
-"grænseflader 'xscanimage' eller 'xsane'. Hvis du bruger GIMP kan du også "
-"skanne ved at vælge det rigtige punkt i menuen 'Filer/Hent'. Brug også 'man "
-"scanimage' på kommandolinjen for at få mere information\n"
-"\n"
-"Du behøver ikke at køre \"scannerdrake\" for at opsætte skanning på denne "
-"enhed, du behøver kun at bruge \"scannerdrake\" hvis du ønsker at dele "
-"skanneren over netværket."
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Din printer blev konfigureret automatisk til at give dig adgang til fotokort-"
-"drevene fra din PC. Nu kan du få adgang til dine fotokort med det grafiske "
-"program 'MtoolsFM' (Menu: 'Programmer' -> 'Filværktøjer' -> 'Mtools "
-"Filadministration') eller kommandolinjeværktøjet 'mtools' (indtast 'man "
-"mtools' på kommandolinjen for mere information). Du finder kortets filsystem "
-"under drevbogstavet 'p:', eller følgende drevbogstaver hvis du har mere end "
-"én HP-printer med fotokortdrev. I 'MtoolsFM' kan du skifte mellem "
-"drevbogstaver med feltet i de øverste højre hjørner af fillisterne."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Overfør printerkonfiguration"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Du kan kopiere printerkonfigurationen du har sat op for køserveren %s til %"
-"s, din nuværende køserver. Al konfigurationsdata (printernavn, beskrivelse, "
-"opkoblingstype og standardindstillinger) bliver overtaget, men ikke "
-"opgaver.\n"
-"Ikke alle køer kan overføres på grund af:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS understøtter ikke printere på Novellservere eller printere som sender "
-"dataene ind i en frit-formet kommando.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ understøtter kun lokale printere, eksterne LPD printere, og Sokkel/TCP "
-"printere.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD og LPRng understøtter ikke IPP printere.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Desuden kan køer lavet med dette program eller \"foomatic -configure\" ikke "
-"overflyttes."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Printere konfigureret med PPD-filerne, som producenten har lavet, eller med "
-"CUPS egne drivere kan heller ikke overflyttes."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Vælg printerene som du vil overflytte og klik\n"
-"\"Overfør\"."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Overfør ikke printere"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Overfør"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"En printer med navnet \"%s\" eksisterer allerede på %s. \n"
-"Klik \"Overfør\" for at overskrive.\n"
-"Du kan også give et nyt printernavn, eller overspringe denne printer."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Nyt printernavn"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "Overfører %s ..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Du har overført din tidligere standard-printer '%s', skal den også være "
-"standard-printer under det nye printersystem %s?"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Opfrisker printerdata ..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Starter netværk ..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Konfigurér netværket nu"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Netværksfunktionalitet ikke konfigureret"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Du er ved at konfigurere en ekstern printer. Dette kræver en virkende "
-"netværksadgang, men dit netværk er endnu ikke konfigureret. Hvis du vil "
-"fortsætte uden en netværkskonfiguration, vil du ikke kunne bruge printeren "
-"som du konfigurerer nu. Hvordan ønsker du at fortsætte?"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Fortsæt med konfigurering af netværk"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"Netværksopsætningen lavet under installationen kan ikke startes nu. Tjek om "
-"netværket bliver tilgængeligt efter opstart af dit system, og ret "
-"konfigurationen med %s Kontrolcenter, afsnittet 'Netværk og internet'/ "
-"'Forbindelse', og konfigurér derefter printeren også med %s Kontrolcenter, "
-"afsnittet om 'Maskinel'/'Printer'"
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Netværksadgangen kørte ikke og kunne ikke startes. Tjek din konfiguration og "
-"dit udstyr. Prøv derefter at konfigurere din eksterne printer igen."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Genstarter printsystemet ..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "høj"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "paranoid"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installerer et printersystem på sikkerhedsniveauet %s"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Du er ved at installere printsystemet %s på et system kørende på "
-"sikkerhedsniveau %s.\n"
-"\n"
-"Dette printsystem kører som en dæmon (baggrundsproces) som venter på "
-"printeropgaver og behandler dem. Denne dæmon er også tilgængelig for "
-"eksterne maskiner via netværket, og derfor er det et muligt angrebspunkt. "
-"Derfor bliver kun nogle få udvalgte dæmoner startet op som standard i dette "
-"sikkerhedsniveau.\n"
-"\n"
-"Ønsker du virkelig at konfigurere udskrivning på denne maskine?"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Starter printsystemet ved opstart"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Printsystemet (%s) vil ikke blive startet automatisk, når maskinen startes "
-"op.\n"
-"Det er muligt at den automatiske opstart blev slået fra ved ændring til et "
-"højere sikkerhedsniveau, fordi printsystemet er et muligt angrebspunkt.\n"
-"\n"
-"Ønsker du at have den automatiske opstart af printsystemet slået til igen?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "Tjekker installeret programmel..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Fjerner %s ..."
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Kunne ikke fjerne '%s'-udskriftssystemet!"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "Installerer %s..."
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Kunne ikke installere %s-udskriftssystemet!"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"I denne tilstand er der ikke noget lokalt udskriftssystem, alle "
-"udskriftsanmodninger går direkte til serveren angivet nedenfor. Bemærk at "
-"det så ikke er muligt at definere lokale printkøer, og at hvis den angivne "
-"server er nede, så kan der slet ikke udskrives fra denne maskine."
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-"Indtast værtsnavnet eller IP-numme på din CUPS-server oh klik O.k. hvis du "
-"ønsker at bruge denne tilstand, ellers klik 'Afslut'."
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "Navn eller IP på ekstern server"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Sætter standard printer..."
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Lokalt CUPS-udskrivningsystem eller ekstern CUPS server?"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr "CUPS-udskrivningssystemet kan bruges på to måder: "
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr "1. CUPS-udskrivningssystemet kan køre lokalt. "
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-"De lokalt forbundne printere kan bruges, og eksterne printere på andre CUPS-"
-"servere i det samme netværk bliver automatisk opdaget. "
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-"Bagdelen ved denne metode er at flere ressourcer kræves på den lokale "
-"maskine. Yderligere programpakker skal installeres, CUPS-dæmonen skal køre i "
-"baggrunden og kræver nogen hukommelse, og IPP porten (port 631) er åbnet. "
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-"2. Alle udskriftsanmodninger sendes øjeblikkeligt til en ekstern CUPS-"
-"server. "
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-"Her er den lokale ressourceanvendelse begrænset til et minimum. Ingen CUPS-"
-"dæmon startes eller -port åbnes, ingen programmelinfrastruktur for opsætning "
-"af lokale printkøer bliver installeret, så mindre hukommelse og diskplads "
-"bruges. "
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-"Bagdelen er, at det ikke er muligt så at definere lokale printere, og hvis "
-"den angivne server er nede, kan der slet ikke udskrives fra denne maskine. "
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr "Hvordan bør CUPS opsættes på din maskine?"
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr "Fjernserver, angiv navn eller IP her:"
-
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr "Lokalt CUPS-udskrivningssystem"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Vælg printerkø-behandler"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Hvilket printersystem (spooler) ønsker du at bruge?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Kunne ikke konfigurere printer '%s'!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Installerer Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr "Kunne ikke installere %s pakkerne. %s kan ikke startes!"
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"De følgende printere er konfigureret. Dobbeltklik på en printer for at ændre "
-"dens indstillinger, for at gøre den til standard-printer, eller for at se "
-"information om den."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Vís alle tilgængelige eksterne CUPS-printere"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Opfrisk printerliste (for at vise alle tilgængelige eksterne CUPS-printere)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS-konfiguration"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Ændr printsystemet"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Normal udgave"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Eksperttilstand"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Printer-muligheder"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Ændr printerkonfiguration"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Printer %s%s\n"
-"Hvad ønsker du at forandre på, på denne printer?"
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "Denne printer er deaktiveret"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Gør det!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Printeropkoblingstype"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Printernavn, beskrivelse, sted"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Printerproducent, model, driver"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Printerproducent, model"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Sæt printeren som standard-printer"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "Aktivér printer"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "Deaktivér printer"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Udskriver testsider"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Lær hvordan denne printer bruges"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Fjern printer"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Fjerner gammel printer \"%s\"..."
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Printer \"%s\" er nu aktiveret."
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Printer '%s' er nu deaktiveret."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ønsker du virkelig at fjerne printeren \"%s\"?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Fjerner printer \"%s\"..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Standard printer"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Printeren '%s' er nu sat som standard-printer."
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Kan ikke tilføje en partition til _formatéret_ RAID %s"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ikke nok partitioner til at benytte RAID level %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "Kunne ikke oprette kataloget /usr/share/sane/firmware!"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "Kunne ikke oprette lænken /usr/share/sane/%s!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr "Kunne ikke kopiere firmware-fil %s til /usr/share/sane/firmware!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "Kunne ikke sætte tilladelser på firmwarefil %s!"
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Skannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-"Kunne ikke installere de nødvendige pakker til deling af dine skannere."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-"Dinne skannere vil ikke være tilgængelige for brugere, der ikke er root."
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "Acceptér/afvis falske IPv4-fejlmeddelelser."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr "Acceptér/afvis rundkastet icmp echo."
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr "Acceptér/afvis icmp echo."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Tillad/forbyd autologind."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"Hvis sat til 'ALL' tillades /etc/issue og /etc/issue.net at eksistere.\n"
-"\n"
-"Hvis sat til 'NONE' er ingen issue-fil tilladt.\n"
-"\n"
-"Ellers er kun /etc/issue tilladt."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr "Tillad/forbyd genstart via konsolbruger."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Tillad/forbyd ekstern root-logind."
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Tillad/forbyd direkte root-logind."
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Tillad/forbyd listen af brugere på systemet på skærmhåndteringer (kdm og "
-"gdm)."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-"Tillad eller forbyd eksportering af skærm ved\n"
-"overgang fra 'root'-kontoen til de andre brugere.\n"
-"\n"
-"Se pam_xauth(8) for flere detaljer.'"
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"Tillad/forbyd X-forbindelser.\n"
-"\n"
-"- ALL (alle forbindelser er tilladt),\n"
-"\n"
-"- LOCAL (kun forbindelse fra lokal maskine),\n"
-"\n"
-"- NONE (ingen forbindelse)."
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"Argumentet angiver om klienter er autoriseret til at koble op til X-serveren "
-"på tcp-port 6000 eller ej."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"Autorisér:\n"
-"\n"
-"- alle tjenester kontrolleret af tcp_wrappers (se hosts.deny(5)) man-siden "
-"hvis sat til 'ALL',\n"
-"\n"
-"- Kun de lokale hvis sat til 'LOCAL',\n"
-"\n"
-"- ingen hvis sat til 'NONE'.\n"
-"\n"
-"For at autorisere de tjenester du behøver, brug /etc/hosts.allow (se hosts."
-"allow(5))."
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"Hvis SERVER_LEVEL (eller SECURE_LEVEL hvis fraværende) er større end 3\n"
-"i /etc/security/msec/security.conf, oprettes symlænken /etc/security/msec/"
-"server\n"
-"til at pege på /etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"Serveren /etc/security/msec/ bruges af 'chkconfig --add' til at bestemme\n"
-"om en tjeneste skal tilføjes hvis den er til stede i filen under "
-"installationen af pakker."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"Aktivér/deaktivér 'crontab' og 'at' for brugere.\n"
-"\n"
-"Put tilladte brugere i /etc/cron.allow og /etc/at.allow\n"
-"(se man at(1) og crontab(1))."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr "Aktivér/deaktivér syslog-rapporter til konsol 12"
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"Aktivér/deaktivér beskyttelse mod spoofning af navneopslag.  Hvis\n"
-"'%s' er sand rapporteres også til syslog."
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Sikkerhedspåmindelser:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "Aktivér/deaktivér beskyttlse mod IP-spoofing."
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr "Aktivér/deaktivér libsafe hvis libsafe findes på systemet."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "Aktivér/deaktivér logning af mærkelige IPv4-pakker."
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Aktivér/deaktivér msec timevise sikkerhedskontrol."
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Aktiverer 'su' kun fra medlemmer af wheel-gruppen, eller tillad 'su' fra "
-"enhver bruger."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "Brug adgangskode til at autentificere brugere."
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr "Aktivér/deaktivér åbenhedstjek på ethernetkort."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr "Aktivér/deaktivér daglig sikkerhedskontrol."
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr "Aktivér/deaktivér sulogin(8) på enkeltbrugerniveau."
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Tilføj navn som en undtagelse for håndteringen af adgangskodeforældelse af "
-"msec."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-"Sæt adgangskodeforældelse til 'max' dage, og forsinkelse for ændring til "
-"'inactive'."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-"Sæt længden på adgangskodehistorik for at forhindre genbrug af adgangskoder."
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Sæt mindste længde for adgangskoder, mindste antal cifre og mindste antal "
-"store bogstaver "
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Sæt umask for root."
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "hvis sat til ja, så tjek åbne porte."
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"hvis sat til ja, så tjek for:\n"
-"\n"
-"- tomme adgangskoder,\n"
-"\n"
-"- ingen adgangskode i /etc/shadow\n"
-"\n"
-"- for andre brugere end root med id = 0."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"hvis sat til ja, så tjek rettigheder på filer i brugernes hjemmekataloger."
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"hvis sat til ja, så tjek om netværksgrænsesnittene er fuldstændigt åbne."
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "hvis sat til ja, så kør de daglige sikkerhedskontroller."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "hvis sat til ja, så tjek tilføjelser og fjernelser af sgid-filer."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "hvis sat til ja, så tjek for tomme adgangskoder i /etc/shadow."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "hvis sat til ja, så efterprøv tjeksummer på suid/sgid-filer."
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "hvis sat til ja, så tjek tilføjelser og fjernelser af suid root-filer."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "hvis sat til ja, så rapportér filer der ikke er ejede af nogen."
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "hvis sat til ja, så kontrollér filer og kataloger skrivbare for alle."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "hvis sat til ja, så kør chkrootkit-kontroller."
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"hvis sat, så send postrapporter til denne postadresse, ellers send dem til "
-"root."
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "hvis sat til ja, så rapportér kontrolresultat per epost."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "Send ikke epost med mindre der er noget at advare om"
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "hvis sat til ja, så kør nogle tjek på rpm-databasen."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "hvis sat til ja, så rapportér kontrolresultat til syslog."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "hvis sat til ja, så rapportér kontrolresultat på tty-en."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Sæt historiklængden for kommandoskallen. En værdi på -1 betyder ubegrænset."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "Sæt skallens tidsudløb. En værdi på nul betyder intet tidsudløb."
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "Enhed for tidsafbrud er sekunder"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Sæt brugerens umask."
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Acceptér falske IPv4-fejlmeddelelser."
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Acceptér rundkastet icmp echo"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "Acceptér icmp echo"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* eksisterer"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "Genstart af konsolbrugeren"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Tillad ekstern root-logind."
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "Direkte logind som root"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr "List brugere på skærmhåndteringer (kdm og gdm)."
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr "Eksportér skærm ved overgang fra 'root' til de andre brugere"
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "Tillad X Window-forbindelser"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "Autorisér TCP-forbindelse til X Windows"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "Autorisér alle tjenester styret af tcp_wrappers"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Chkconfig følger msec regler"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "Aktivér 'crontab' og 'at' for brugere"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "Syslog rapporterer til konsol 12"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "Beskyttelse mod falske navneoplysninger"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "Aktivér beskyttelse mod IP-spoofing."
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "Aktivér/deaktivér libsafe hvis libsafe findes på systemet"
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "Aktivér logning af mærkelige IPv4-pakker."
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "Aktivér/deaktivér msec timevise sikkerhedskontrol"
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-"Aktiverer 'su' kun fra medlemmer af wheel-gruppen, eller tillad 'su' fra "
-"enhver bruger"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "Brug adgangskode til at autentificere brugere."
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "Aktivér/deaktivér åbenhedstjek på ethernetkort."
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "Dagligt sikkerhedstjek"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "Sulogin(8) på enkeltbrugerniveau"
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Ingen ældning af adgangskode for"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-"Sæt udløbstid for adgangskoder og forsinkelsestider for deaktivering af konti"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Længde af historik for adgangskode"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "Mindste længde for adgangskode og antal af cifre og store bogstaver"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "Umask for root"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Størrelse af historik i skallen"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Udløbstid for skál"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "Brugers umask"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Tjek åbne porte"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "Tjek for usikrede konti"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr "Tjek rettigheder på filer i brugernes hjemmekataloger."
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "Tjek om netværksgrænsesnittene er fuldstændigt åbne."
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Kør de daglige sikkerhedskontroller"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "Tjek tilføjelser og fjernelser af sgid-filer."
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "Tjek for tomme adgangskoder i /etc/shadow"
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "Efterprøv tjeksummer på suid/sgid-filer"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "Tjek tilføjelser og fjernelser af suid root-filer"
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "Rapportér filer der ikke er ejede af nogen."
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Kontrollér filer og kataloger skrivbare for alle."
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "Kør chkrootkit-kontroller"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "Send ikke unødvendig post"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"hvis sat, så send postrapporter til denne postadresse, ellers send dem til "
-"root."
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "Rapportér kontrolresultat per epost."
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "Kør nogle tjek på rpm-databasen"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Rapportér kontrolresultat til syslog."
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Rapportér kontrolresultat på tty-en."
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Velkommen til Crackere"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Ringe"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Høj"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Højere"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Dette niveau skal bruges med omtanke. Det gør dit system nemmere at bruge, "
-"men er meget sårbart: det må ikke bruges til en maskine der er i et netværk "
-"eller har forbindelse til Internettet. Der er ikke nogen kontrol af "
-"adgangskoder."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Kontrol af adgangskode er nu aktiveret, men brug som netværksmaskine er "
-"stadig ikke anbefalet."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Dette er standard sikkerheds-anbefalingen for en maskine\n"
-" med forbindelse til Internettet som klient. "
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Der er allerede nogle begrænsninger, og flere automatiske kontroller bliver "
-"kørt hver nat."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Med dette sikkerhedsniveau kan brug som server komme på tale.\n"
-"Sikkerheden er nu høj nok til at systemet kan bruges som server som tillader "
-"forbindelser fra mange klienter. Bemærk: hvis din maskine kun er en klient "
-"på internettet bør du hellere vælge et lavere niveau."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Baseret på det foregående niveau, men systemet er nu helt lukket.\n"
-"Sikkerhedsfaciliteterne er nu på deres højeste niveau."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Basale valgmuligheder for DrakSec"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Vælg det ønskede sikkerhedniveau"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Sikkerhedsniveau"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Brug libsafe for servere"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-"Et bibliotek som beskytter mod angreb via bufferoverløb og formatstrenge."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sikkerhedsadministrator (brugernavne eller e-post)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Start ALSA (Advanced Linux Sound Architecture) lydsystemet"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron en periodisk kommando planlægger"
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd bruges til at overvåge batteristatus og skrive log til syslog.\n"
-"Den kan også bruges til at lukke maskinen når batteriet er på lav."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Kører planlagte kommandoer med 'at' kommandoen på tiden specificeret da 'at' "
-"blev kørt, og kører batch kommandoer når den gennemsnitlige systembelastning "
-"er lav nok"
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron er et standard UNIX program der kører bruger-specifikke programmer på "
-"planlagte tidspunkter. Vixie cron tilføjer en del forbedringer til den "
-"basale UNIX cron, inklusive bedre sikkerhed og stærkere "
-"konfigurationsmuligheder."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"FAM er en filovervågnings-dæmon. Den bruges til at rapportere når filer er "
-"blevet ændret.\n"
-"Den bruges af Gnome og KDE"
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM tilføjer muse-support til tekst-baserede Linux applikationer såsom "
-"Midnight Commander. Den tillader muse-baseret kopiér-og-sætind operationer "
-"på konsollen og inkluderer support for pop-op-menuer i konsollen."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake kører en søgning efter maskinel, og kan konfigurere nyt/ændret "
-"maskinel."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache er en webserver.  Den bruges til at betjene HTML-filer og CGI."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver-dæmonen (kaldet inetd) starter forskellige internet-"
-"tjenester efter behov. Den er ansvarlig for at starte tjenester som telnet, "
-"ftp, rsh og rlogin. Hvis inetd deaktiveres, deaktiveres alle de tjenester, "
-"den er ansvarlig for."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Start pakkefiltrering for Linux kerne 2.2 serien for at opsætte en brandmur "
-"til at beskytte din maskine mod netværksangreb."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Denne pakke indlæser den valgte tastatur-tabel, som valgt i /etc/sysconfig/"
-"keyboard. Dette kan vælges i kbdconfig programmet. Dette bør være slået til "
-"på de fleste maskiner."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatisk regenerering af kernehoved i /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "automatisk opdagelse og konfigurering af maskinel ved opstart."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf vil nogen gange arrangere udførelse af forskellige opgaver ved "
-"opstart for at vedligeholde systemkonfigurationen."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd er printer-dæmonen som er nødvendig for at lpr virker.\n"
-"Den er basalt en server der håndterer udskrifts-opgaver."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtuel Server, brugt til at bygge en server med høj ydelse og\n"
-"tilgængelighed."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) er en domæne-navneserver (DNS) der bruges til opslag af IP-"
-"adresser for værtsnavne."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Monterer og afmonterer alle netværks filsystemer (NFS), SMB (LanManager/"
-"Windows) og NCP (NetWare) monterings-stier"
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Aktiverer/deaktiverer alle netværks-kort som er konfigureret\n"
-"til at starte ved opstart"
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS er en populær protokol til fildeling over TCP/IP netværk.\n"
-"Denne tjeneste giver NFS-serverfunktionalitet, som konfigureres gennem /etc/"
-"exports filen"
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS er en populær protokol til fildeling over TCP/IP\n"
-"netværk. Denne service giver NFS fillåsnings funktionalitet"
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Aktiverer automatisk numlock-tast i konsol og Xorg ved\n"
-"opstart."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Støtter OKI 4w og kompatible winprintere."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"PCMCIA understøttelse er normalt til at understøtte ting som ethernet og "
-"modemer på bærbare.  Den vil ikke blive startet medmindre den er "
-"konfigureret, så det er sikkert at have den installeret på maskiner der ikke "
-"har behov for den."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Portmapper håndterer RPC tilslutninger, som bliver brugt af protokoller som "
-"NFS og NIS. Portmap serveren skal køre på maskiner som bruger protokoller "
-"der udnytter RPC mekanismen"
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix er en transport-agent for post, som bruges af programmer der flytter "
-"post fra en maskine til en anden."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Gemmer og henter systemets entropipøl for en højre kvalitet\n"
-"ved generering af tilfældige tal."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Tilordn rå enheder til blokenheder (som harddisk-\n"
-"partitioner) til brug af applikationer som Oracle eller DVD-afspillere"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Routed dæmonen giver mulighed for automatisk IP rutetabel opdatering via RIP "
-"protokollen. RIP kan bruges til små netværk, men når det kommer til mere "
-"komplekse netværk er der behov for en mere kompleks protokol."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokollen tillader brugere på et netværk at hente systeminformation "
-"fra enhver maskine på dette netværk."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers protokollen tillader brugere på et netværk a identificere\n"
-"hvem der er logget på andre maskiner"
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"rwho protokollen tillader eksterne brugere at hente en liste over alle "
-"brugere der er logget ind på en maskine, der kører rwho dæmonen (minder om "
-"finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Start lydsystemet på din maskine"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog er en facilitet som mange dæmoner bruger til log beskeder\n"
-"Det er en god idé altid at køre syslog"
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Indlæs driverne for dine usb-enheder."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "Starter X-font serveren (dette er obligatorisk for at Xorg skal køre)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Vælg hvilke tjenester der skal startes automatisk ved opstart"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Printning"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Internet"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Fildeling"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Ekstern administration"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Databaseserver"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "kører"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "stoppet"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Tjenester og dæmoner"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Beklager, der er ingen ekstra\n"
-"information om denne tjeneste."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "Start når der bedes om det"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "Ved opstart"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Start"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Stop"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Hvad er Mandriva Linux?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Velkommen til <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-"Mandriva Linux er en <b>Linux-distribution</b> som består af systemkernen, "
-"kaldet <b>operativsystemet</b> (baseret på Linux-kernen) sammen med <b>en "
-"masse programmer</b> som opfylder alle behov som du kan forestille dig."
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"Mandriva Linux er den mest <b>brugervenlige</b> Linux-distribution i dag. "
-"Det er også en af de <b>mest brugte</b> Linux-distributioner i verden!"
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Åben Kildetekst</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Velkommen til <b>verdenen af åben kildetekst</b>!"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"Mandriva Linux er bundet til Åben Kildettekst-modellen. Dette betyder at "
-"denne nye udgave er resultatet af <b>samarbejdet</b> mellem <b>Mandriva's "
-"team af udviklere</b> og det <b>verdensomspændende fællesskab</b>  af "
-"Mandriva Linux-bidragsydere."
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-"Vi vil <b>takke</b> alle som har deltaget i udviklingen af denne nyeste "
-"udgave."
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>GPL</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-"Det meste af programmellet indeholdt i distributionen og alle Mandriva Linux-"
-"værktøjerne licensieres under <b>General Public License</b>."
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-"GPL er hjertet af åben kildetekst-modellen; den giver alle <b>friheden</b> "
-"til at bruge, studere, distribuere og forbedre programmellet på enhver måde "
-"de ønsker, så længe de gør resultaterne frit tilgængelige."
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-"Hovedfordelen med dette er at antallet af udviklere er praktisk taget "
-"<b>ubegrænset</b>, med <b>meget høj kvalitet</b> af programmellet til følge."
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>Vær med i Fællesskabet</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-"Mandriva Linux har et af de <b>største fællesskaber</b> af brugere og "
-"udviklere. Sådan et fællesskabs rolle er meget bred, spændende fra "
-"fejlrapportering til udviklingen af nye programmer. Fællesskabet spiller en "
-"<b>nøglerolle</b> i Mandriva Linux-verdenen."
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-"For at <b>lære mere</b> om vores dynamiske fællesskab kan du besøge <b>www."
-"mandrivalinux.com</b> eller direkte på <b>www.mandrivalinux.com/en/"
-"cookerdevel.php3</b> hvis du kunne tænke dig at blive <b>involveret</b> i "
-"udviklingen."
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr "<b>Download version</b>."
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-"Du installerer nu <b>Mandriva Linux Download</b>. Dette er den frie og "
-"gratis version som Mandriva ønsker at holde <b>tilgængelig for alle</b>."
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-"Download-versionen <b>kan ikke indeholde</b> alt det programmel som ikke er "
-"åben kildetekst. Derfor vil du ikke finde det følgende i Download-versionen "
-"(men det kan muligvis findes på de respektive firmaers hjemmesider eller "
-"andre steder): "
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-"\t* <b>Producentejede drivere</b> (såsom drivere for NVIDIA®, ATI™, etc.)."
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-"\t* <b>Producentejet programmel</b> (såsom Acrobat® Reader®, RealPlayer®, "
-"Flash™, osv.)."
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-"Du vil heller ikke have adgang til <b>tjenester indeholdt</b> i de andre "
-"Mandriva produkter."
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr "<b>Discovery, dit første Linux-skrivebord</b>"
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr "Du installerer nu <b>Mandriva Linux Discovery</b>."
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery er den <b>nemmeste</b> og mest <b>brugervenlige</b> Linux-"
-"distribution. Den indeholder et håndplukket udvalg af <b>top programmel</b> "
-"for kontor, multimedie og Internetaktiviteter. Dens menu er "
-"opgaveorienteret, men kun ét program per opgave."
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr "<b>PowerPack, Det ultimative Linux-skrivebord</b>"
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr "Du installerer nu <b>Mandriva Linux PowerPack</b>."
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-"PowerPack er Mandrivas <b>toplinje produkt til Linux-skrivebordet</b>. "
-"PowerPack indeholder <b>tusindvis af programmer</b> - alt fra det mest "
-"populære til det mest avancerede."
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr "<b>PowerPack+, Linux-løsningen for skriveborde og servere</b>"
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr "Du installerer nu <b>Mandriva Linux PowerPack+</b>"
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-"PowerPack+ er en <b>facilitetsfyldt Linux-løsning</b> for små til "
-"mellemstore <b>netværk</b>. Powerpack+ indeholder tusindvis af <b>programmer "
-"til skrivebordet</b> og et stort udvalg af <b>serverapplikationer</b> i "
-"verdensklasse."
-
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Mandrivas produkter</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-"<b>Mandriva</b> har udviklet et stort udvalg af <b>Mandriva Linux</b> "
-"produkter."
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Mandriva Linux produkter er:"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr "\t* <b>Discovery</b>, Dit første Linux-skrivebord."
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr "\t* <b>PowerPack</b>, Det ultimate Linux-skrivebord."
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr "\t* <b>PowerPack+</b>, Linux-løsningen for skriveborde og servere."
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-"\t* <b>Mandriva Linux for x86-64</b>, Mandriva Linux-løsningen for få mest "
-"ud af din 64-bit processor."
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr "<b>Mandrivas produkter (Nomad Produkter)</b>"
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-"Mandriva har udviklet to produkter, som giver dig mulighed for at bruge "
-"Mandriva Linux <b>på enhver maskine</b> og uden noget behov for faktisk at "
-"installere det:"
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-"\t* <b>Move</b>, en Mandriva Linux-distribution som kører udelukkende fra en "
-"opstartelig CD-ROM."
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-"\t* <b>GlobeTrotter</b>, en Mandriva Linux-distribution præinstalleret på "
-"den ultra-kompakte “LaCie Mobile Hard Drive”."
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "<b>Mandrivas produkter (professionelle løsninger)</b>"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-"Nedenfor er Mandriva-produkterne beregnet til at opfylde de "
-"<b>professionnelle behov</b>:"
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-"\t* <b>Corporate Desktop</b>, Mandriva Linux' skrivebord for "
-"forretningsverdenen."
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr "\t* <b>Corporate Server</b>, Mandriva Linux' serverløsning."
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr "\t* <b>Multi-Network Firewall</b>, Mandriva Linux' sikkerhedsløsning."
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>KDE-valget</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-"Med vores Discovery vil du blive introduceret til <b>KDE</b>, det mest "
-"avancerede og brugervenlige <b>grafiske skrivebordsmiljø</b>, der findes."
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-"KDE vil gøre dine <b>første skridt</b> med Linux så <b>nemme</b> at du "
-"aldrig vil tænke på at køre et andet operativsystem!"
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-"KDE indeholder også en masse <b>velintegrerede programmer</b> såsom "
-"netlæseren Konqueror og den personlige informations-administrator Kontact."
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Vælg dit foretrukne skrivebordsmiljø</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"Med PowerPack vil du kunne vælge det <b>grafiske skrivebordsmiljø</b>. "
-"Mandriva har valgt <b>KDE</b> som standard."
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-"KDE er et af de <b>mest avancerede</b> og <b>brugervenlige</b> grafiske "
-"skrivebordsmiljøer tilgængeligt. Det indeholder en masse integrerede "
-"programmer."
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-"Men vi råder dig til at prøve alle de tilgængelige (inklusive <b>GNOME</b>, "
-"<b>IceWM</b>, osv.) og tage din foretrukne."
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"Med PowerPack+ vil du kunne vælge det <b>grafiske skrivebordsmiljø</b>. "
-"Mandriva har valgt <b>KDE</b> som standard."
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "<b>OpenOffice.org</b>"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr "Med Discovery vil du opdage <b>OpenOffice.org</b>."
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-"Det er en <b>fuldstændig kontorpakke</b> som indeholder tekstbehandlings-, "
-"regnearks-, præsentations- og tegneprogrammer."
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-"OpenOffice.org kan læse og skrive de fleste typer <b>Microsoft® Office</b> "
-"dokumenter såsom Word-, Excel- og PowerPoint®-filer."
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-"Discovery indeholder <b>Kontact</b>, den nye KDE <b>gruppevare-løsning</b>."
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"Mer end bare en <b>epostklient</b> fuld af faciliteter; Kontact inkluderer "
-"også en <b>adressebog</b>, en <b>kalender</b>, plus et værktøj til at tage "
-"<b>notater</b>!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-"Det er den nemmeste måde at kommunikere med dine kontakter og organisere din "
-"tid."
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Surf på internettet</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr "Discovery vil give dig adgang til <b>alle Internet-ressourcer</b>:"
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* Surf på <b>nettet</b> med Konqueror."
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr "\t* <b>Chat</b> på nettet med dine venner ved hjælp af Kopete."
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "\t* <b>Overfør</b> filer med Kbear."
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr "<b>Nyd vores multimedie-faciliteter</b>"
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr "Discovery vil også gøre <b>multimedie</b> meget nemt for dig:"
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr "\t* Se dine favorit-<b>videoer</b> med Kaffeine."
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr "\t* Lyt til dine <b>musikfiler</b> med amaroK."
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* Redigér og lav <b>billeder</b> med Gimp"
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr "<b>Nyd det store udvalg af programmer</b>"
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"I Mandriva Linux-menuen vil du finde applikationer som er <b>nemme</b> at "
-"bruge til <b>alle dine opgaver</b>:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr "\t* Opret, redigér og del dokumenter med <b>OpenOffice.org</b>"
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* Få styr på dine personlige data med de integrerede, personlige "
-"informationssuiter <b>Kontact</b> og <b>Evolution</b>"
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr "\t* Surf på nettet med <b>Mozilla</b> og <b>Konqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* Deltag i onlinesamtaler med Kopete"
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* Lyt til dine <b>audio CDer</b> og <b>musikfiler</b>. se dine <b>videoer</"
-"b>."
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* Redigér billeder og fotografier med <b>Gimp</b>"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Udviklingsmiljøer</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-"PowerPack giver dig de bedste værktøjer til at <b>udvikle</b> dine egne "
-"programmer."
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-"Du vil nyde det stærke, integrerede udviklingsmiljø fra KDE, <b>KDevelop</"
-"b>, som vil give dig mulighed for at programmere i en masse sprog."
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-"PowerPack leveres også med <b>GCC</b>, den førende Linux-oversætter, og "
-"<b>GDB</b>, den tilhørende fejlsøger."
-
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>Udviklingsredigering<b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-"PowerPack vil lade dig vælge mellem disse <b>populære redigeringsprogrammer</"
-"b>:"
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-"\t* <b>Emacs</b>: et realtids tekstprogram som lader sig tilpasses meget"
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-"\t - <b>XEmacs</b>: endnu et open source tekstprogram og  "
-"applikationsudviklingssystem"
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-"\t <b>Vim</b>: en avanceret tekstredigering med flere faciliteter end "
-"standard Vi"
-
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>Udviklingssprog<b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-"Med alle disse <b>stærke værktøjer</b> vil du kunne skrive programmer i "
-"<b>dusinvis af programmeringssprog</b>:"
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr "\t* Det berømte <b>C-sprog</b>."
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr "\t* Objektorienterede sprog:"
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr "\t* Skripting sprog:"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr "\t* Og mange andre."
-
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>Udviklingsværktøjer<b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-"Med det stærke integrerede udviklingsmiljø <b>KDevelop</b> og den førende "
-"Linux-oversætter <b>GCC</b> vil du være i stand til at lave programmer i "
-"<b>mange forskellige sprog</b> (C, C++, Java™, Perl, Python, osv.)."
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Guppevare-servere</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-"PowerPack+ vil give dig adgang til <b>Kolab</b>, en fuldstændig "
-"<b>gruppevare-server</b>, som takket være klienten <b>Kontact</b> vil give "
-"dig mulighed for at:"
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* Send og modtag din <b>epost</b>."
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr "\t* Del dine <b>dagsordener</b> og dine <b>adressebøger</b>."
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr "\t* Administrér dine <b>notater</b> og <b>opgavelister</b>."
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Servere</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-"Styrk dit firmanetværk med <b>udmærkede serverløsninger</b> som inkluderer:"
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr "\t* <b>Samba</b>: Fil- og printer-tjenester for MS Windows-klienter"
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: Den mest brugte Web-server"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-"\t* <b>MySQL</b> og <b>PostgreSQL</b>: Verdens mest populære Åben Kildetekst-"
-"databaser"
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: Concurrent Versions System, det dominerende open-source "
-"transparente versionskontrolsystem"
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-"\t* <b>ProFTPD</b>: det meget konfigurerbare, GPL-lisencierede FTP-"
-"serverprogram"
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-"\t* <b>Postfix</b> og <b>Sendmail</b>: De populære og stærke postservere."
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Mandriva Linux Kontrolcenter</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"<b>Mandriva Linux Kontrolcenter</b> er en essentiel samling af Mandriva-"
-"specifikke værktøjer beregnet til at forenkle konfigurationen af din maskine,"
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-"Du vil umiddelbart sætte pris på denne samling af <b>mere end 60</b> nemme "
-"programmer til at <b>enkelt konfigurere dit system</b>: udstyrsenheder, "
-"monteringspunkter, netværk og internet, sikkerhedsniveau på din maskine osv."
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>Modellen for Åben Kildetekst</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-"Som al anden edb-programmering kræver åben kildetekst-programmel <b>tid og "
-"folk</b> til udvikling. For at respektere filosofien i åben kildetekst "
-"sælger Mandriva added-value produkter og tjenester for at <b>fortsat "
-"forbedre Mandriva Linux</b>. Hvis du ønsker at <b>støtte åben kildetekst-"
-"filosofien</b> og udviklingen af Mandriva Linux, så <b>vær sød</b> at "
-"overveje køb af et af vores produkter eller tjenester!"
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>OnlineStore</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"Besøg vores <b>e-handelsplatform</b> for at lære mere om Mandrivas produkter "
-"og tjenester."
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr "Dér kan du finde alle produkter, tjenester og tredjeparts-produkter."
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-"Denne platform er netop blevet <b>redesignet</b> for at forbedre dets "
-"effektivitet og brugbarhed."
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "Kig forbi i dag på <b>store.mandriva.com</b>"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-"<b>Mandriva Club</b> er den <b>perfekte følgesvend</b> til dit Mandriva "
-"Linux produkt.."
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-"Drag nytte af <b>værdifulde fordele</b> ved at være med i Mandriva Club, med:"
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-"\t* <b>Specielle rabatter</b> på produkter og tjenester fra vores netbutik "
-"<b>store.mandriva.com</b>"
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-"\t* Adgang til <b>kommercielle programmer</b> (fx til NVIDIA® or ATI™ "
-"drivere)."
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* Deltagelse i Mandriva Linux <b>brugerfora</b>."
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-"\t*<b>Tidlig og priviligeret adgang</b>, før offentlige udgivelser, til "
-"Mandriva Linux-<b>ISO-aftryk</b>."
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-"<b>Mandriva Online</b> er en ny førsteklasses tjeneste som Mandriva er stolt "
-"af at tilbyde sine kunder!"
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-"Mandriva Online giver et bredt udvalg af værdifulde tjenester for <b>nem "
-"opdatering</b> af dine Mandriva Linux-systemer:"
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr "\t* <b>Perfekt</b> systemsikkerhed (automatiske programopdateringer)."
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-"\t* <b>Underretning</b> om opdateringer (via epost eller ved et miniprogram "
-"på skrivebordet)."
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr "\t* Fleksible <b>planlagte</b> opdateringer."
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr "\t* Styring af <b>alle dine Mandriva Linux-systemer</b> via én konto."
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-"Har du behov for <b>assistance?</b> Mød Mandrivas tekniske eksperter på "
-"<b>vores tekniske kundestøtteplatform</b> www.mandrivaexpert.com."
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-"Takket være hjælpen fra <b>kvalificerede Mandriva Linux-eksperter</b>, så "
-"vil du spare en masse tid."
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-"For alle spørgsmål relateret til Mandriva Linux så har du muligheden for at "
-"købe kundestøttehjælp på <b>store.mandriva.com</b>."
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Kontor-arbejdsstation"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Kontor-programmer: Tekstbehandling (OpenOffice.org, kword, abiword), "
-"regneark (OpenOffice.org, kspread, gnumeric), pdf-visere, o.lign."
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Kontor-programmer: Tekstbehandler (kword, abiword), regneark (kspread, "
-"gnumeric), pdf-visere, o.lign."
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Spillemaskine"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Underholdnings-programmer: arkade, bræt, strategi, osv."
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Multimedie-station"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Lyd- og video-afspillere og redigeringsværktøjer"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Internet-station"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Værktøjssæt til at læse samt sende post og nyheder (mutt, tin..) , og til at "
-"browse på nettet"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Netværksmaskine (klient)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Klienter for forskellige protokoller inklusiv ssh"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Værktøjer til at lette indstillingen af din maskine"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Konsolværktøjer"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redigeringsværktøjer, skaller, filværktøjer, terminaler"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C og C++ udviklingsbiblioteker, programmer, og include-filer."
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bøger og vejledninger om Linux og Frit Programmel"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Linux Standard Base. Understøttelse for tredjeparts-programmer"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "Gruppeprogrammel"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Kolab-server"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Brandmur/ruter"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Internetadgang"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "Post og nyheder"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix postserver, inn nyhedsserver"
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "Katalogserver"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "FTP-server"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Server for domænenavne (DNS) og netværksinformation (NIS)"
-
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Fil- og Printerdelings-server"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "NFS-server, Samba-server"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Database"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "PostgreSQL og MySQL database-server"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache og Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Post"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Postfix postserver"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL eller MySQL database-server"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Netværksmaskine server"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-vært, SMB-vært, mellemvært (proxy), SSH-vært"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "KDE-arbejdsstation"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"K Desktop -miljøet, det grundlæggende grafiske miljø, med en vifte af "
-"supplerende værktøjer."
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Gnome-arbejdsstation"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Et grafisk miljø med brugervenlig samling af programmer og værktøjer"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Andre grafiske miljøer"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Nytteprogrammer"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "SSH-server"
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "Webmin"
-
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Webmin ekstern konfigurationsserver"
-
-#: share/compssUsers.pl:191
-#, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Nytteprogrammer og overvågning af netværk"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr "Overvågningsværktøjer, proceskontering, tcpdump, nmap, ..."
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "Mandriva konfigurationsprogrammer"
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "Hjæpeprogrammer til at konfigurere server"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"Dette program er gratis programmel; du kan redistribuere det og/eller ændre\n"
-"det i henhold til betingelserne i GNU General Public License, som publiceret "
-"af\n"
-"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-"af licensen.\n"
-"\n"
-"Dette program er udgivet i håb om at det vil være anvendeligt, men\n"
-"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-"SALGBARHED eller EGNETHED TIL ET BESTEMT FORMÅL. Se GNU\n"
-"General Public License for flere detaljer.\n"
-"\n"
-"Du skulle have modtaget en kopi af GNU General Public License\n"
-"sammen med dette program; hvis ikke, skriv til Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,\n"
-"USA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Sikkerhedskopierings- og genskabelses-program\n"
-"\n"
-"--default             : gem standardkataloger.\n"
-"--debug               : vís alle fejlsøgningsbeskeder.\n"
-"--show-conf           : liste af filer eller kataloger at "
-"sikkerhedskopiere.\n"
-"--config-info         : forklar konfigurationsfilens muligheder (for non-X "
-"brugere).\n"
-"--daemon              : brug dæmon-konfiguration. \n"
-"--help                : vís denne besked.\n"
-"--version             : vís versionsnummer.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"MULIGHEDER:\n"
-"  --boot            - aktivér for at konfigurere opstartsindlæser\n"
-"  --splash          - aktivér for at konfigurere opstartstema\n"
-"standard-tilstand: tilbyd at konfigurere autologin-facilitet"
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[VALGMULIGHEDER] [PROGRAM-NAVN]\n"
-"\n"
-"VALGMULIGHEDER:\n"
-"  --help            - udskriv denne hjælpebesked.\n"
-"  --report          - program bær være én af Mandriva Linux' værktøjer\n"
-"  --incident        - program bær være én af Mandriva Linux' værktøjer"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-"[--add]\n"
-"  --add             - \"tilføj et netværksgrænsesnit\"-hjælper\n"
-"  --del             - \"slet et netværksgrænsesnit\"-hjælper\n"
-"  --skip-wizard     - håndtér opkoblinger\n"
-"  --internet        - konfigurér internet\n"
-"  --wizard          - det samme som --add"
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"Skrifttype-import og overvågningsapplikation\n"
-"\n"
-"--windows_import : importér fra alle tilgængelige windowspartitioner.\n"
-"--xls_fonts      : vis alle skrifttyper som allerede eksisterer fra xls\n"
-"--install        : installér alle skrifttyper og kataloger.\n"
-"--uninstall      : afinstallér alle skrifttyper og kataloger.\n"
-"--replace        : erstat skrifttyper som eksisterer fra før\n"
-"--application    : 0 ingen applikation.\n"
-"                 : 1 alle tilgængelige understøttede applikationer.\n"
-"                 : applikationsnavn, som \"so\" for staroffice \n"
-"                 : og 'gs' for ghostscript - kun for denne."
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIONS]...\n"
-"Mandriva Linux TerminalServer konfigureringsprogram\n"
-"--enable         : aktivér MTS\n"
-"--disable        : deaktivér MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : tilføj en eksisterende systembruger til MTS (kræver "
-"brugernavn)\n"
-"--deluser        : slet en eksisterende systembruger fa MTS (kræver "
-"brugernavn)\n"
-"--addclient      : tilføj en klientmaskine til MTS (kræver MAC-adresse, IP, "
-"nbi aftryksnavn)\n"
-"--delclient      : tilføj en klientmaskine til MTS (kræver MAC-adresse, IP, "
-"nbi aftryksnavn)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[tastatur]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=minfil] [--word=mitord] [--explain=regudtryk] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[VALGMULIGHEDER]\n"
-"Program til netværks- & Internet forbindelse og overvågning\n"
-"\n"
-"--defaultintf grænseflade : vís denne grænseflade som standard\n"
-"--connect : kobl op til internettet hvis ikke allerede opkoblet\n"
-"--disconnect : kobl fra internettet hvis allerede opkoblet\n"
-"--force : brugt med (dis)connect : gennemtving (dis)connect.\n"
-"--status : returnerer 1 hvis opkoblet, ellers 0; afslut derefter.\n"
-"--quiet : vær ikke interaktiv. Bruges med (dis)connect."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-"  --no-confirmation      spørg ikke det første bekræftelsesspørgsmål i "
-"Mandriva Update-tilstand\n"
-"  --no-verify-rpm        efterprøv ikke pakke-signaturer\n"
-"  --changelog-first      vís changelog før filliste i beskrivelsesvinduet\n"
-"  --merge-all-rpmnew     foreslå at flette alle .rpmnew/.rpmsave filer fundet"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=enhed] [--update-sane=sane_kilde_kat] [--update-"
-"usbtable] [--dynamic=enhed]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [everything]\n"
-"       XFdrake [--noauto] skærm\n"
-"       XFdrake opløsning"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Brug: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Du skal genstarte maskinen for at ændringerne skal gælde"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Log ud og tryk herefter på Ctrl-Alt-Bak"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr "Du skal logge ud og ind igen for at ændringerne skal gælde"
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "Ubrugelig uden terminalserver"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s kræver et brugernavn...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s kræver værtsnavn, MAC-adresse, IP, nbi-aftryk, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: %s kræver et værtsnavn...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Konfiguration af Terminalserver"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Aktivér server"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Deaktivér server"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Start server"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Stop server"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot diskette/ISO"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Opstartsbilleder for netopstart"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Tilføj/slet brugere"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Tilføj/slet klienter"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Billeder"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr "Klienter/brugere"
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "Førstegangshjælper"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr "%s defineret som dm, tilføjer gdm-bruger til /etc/passwd$$CLIENT$$"
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-"\n"
-" Denne hjælperrutine vil:\n"
-" \t1) Spørge dig om at vælge enten 'tynde' eller 'tykke' klienter.\n"
-"\t2)Opsætte DHCP.\n"
-"\t\n"
-"Efter at have gjort følgende trin så vil hjælperen:\n"
-"\t\n"
-"    a) Oprette alle "
-"nbi'er.                                                                \n"
-"    b) Aktivere "
-"serveren.                                                          \n"
-"    c) Starte "
-"serveren.                                                     \n"
-"    d) Synkronisere skygge-filer så at alle brugere, inklusive root, \n"
-"       er tilføjet i shadow$$CLIENT$$-"
-"filen.                                               \n"
-"    e) Spørge dig om at oprette en opstartsdiskette.\n"
-"    f) Hvis der er tynde klienter, spørge om du vil starte KDM igen.\n"
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Afbryd vejlederen"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr "Gem venligst dhcpd-konfiguration!"
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr "Brug tynde klienter."
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr "Synkronisér klientens X-tastatursopsætning med serverens."
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"Vælg venligst standard klienttype.\n"
-"    'Tynde' klienter kører alting på serverens CPU/RAM, ved brug af "
-"klientens skærm.\n"
-"    'Tykke' klienter bruger deres egen CPU/RAM, men serverens filsystem."
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "Opretter netopstartsaftryksfiler for alle kerner"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Dette vil tage nogle få minutter."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Færdig!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr "Synkroniserer serverbrugerliste med klientliste, inklusive root."
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-"For at kunne aktivere ændringer gjort for tynde klienter, så skal "
-"sessionsbehandleren startes igen. Start igen nu?"
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr "TerminalServer-oversigt"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"        - Lav Etherboot-aktiverede opstartsaftryksfiler:\n"
-"        \tFor at starte med en kerne via etherboot skal en speciel kerne/"
-"initrd-aftryksfil oprettes.\n"
-"        \ttmkinitrd-net laver meget af dette arbejde og drakTermServ er bare "
-"en grafisk grænseflade\n"
-"        \tfor at hjælpe til med at håndtere/ændre på disse aftryksfiler. For "
-"at \n"
-"        \toprette filen /etc/dhcpd.conf.etherboot-pcimap.include som "
-"trækkes \n"
-"        \tind som en inklusionsfil i /etc/dhcpd.conf bør du oprette "
-"aftrykkene for \n"
-"        \tetherboot for mindst én fuld kerne."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"        - Vedligeholdelse af /etc/dhcpd.conf:\n"
-"        \t\tFor at starte klientene over netværk behøver hver klient en "
-"indgang i dhcpd.conf, som udleverer en IP-adresse\n"
-"        \t\tog netværksopstart-aftryksfiler til maskinen. drakTermServ "
-"hjælper til med at lave/fjerne disse indgange.\n"
-"\t\t\t\n"
-"        \t\t(PCI-kort kan undlade aftryksfilen - etherboot vil efterspørge "
-"den rigtige aftryksfil. Du bør\n"
-"        \t\togså bemærke at når etherboot ser efter aftryksfilerne forventer "
-"den navne som\n"
-"        \t\tboot-3c59x.nbi, fremfor boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tEt typisk dhcpd.conf-afsnit for at understøtte diskløse klienter "
-"ser sådan ud:"
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"\t\t\tMens du kan bruge en pøl af IP-adresser, fremfor at opsætte en "
-"specifik opsætningsindgang for\n"
-"\t\t\ten klientmaskine, vil brug af faste adresser lette\n"
-"brugen\n"
-"\t\t\taf klientspecifikke konfigurationsfiler som ClusterNFS tilbyder.\n"
-"\t\t\t\n"
-"\t\t\tBemærk: \"#type\"-indgangen er kun brugt af drakTermServ.  Klienter "
-"kan enten være 'tynde'\n"
-"\t\t\teller 'tykke'.  Tynde klienter kører størsteparten af programmellet "
-"via XDMCP, mens tykke klienter kører størsteparten\n"
-"af programmellet på klientmaskinen. En speciel inttab, %s bliver\n"
-"\t\t\tskrevet for tynde klienter. Systemkonfigurationsfilerne xdm-config, "
-"kdmrc, og gdm.conf bliver ændrede hvis tynde klienter bliver brugt, for at "
-"aktivere XDMCP. Idet der er sikkerhedsproblematikker omkring brugen af "
-"XDMCP, så bliver hosts.deny og hosts.allow ændret for at begrænse adgangen "
-"til det lokale subnet.\n"
-"Bemærk: Indgangen '#hdw_config' bruges også kun af drakTermServ. \n"
-"\t\t\tKlienter kan enten være 'true' eller 'false'. 'true' aktiverer root-"
-"logind på \n"
-"\t\t\tklientmaskinen og tillader lokal udstyrskonfiguration af lyd, mus og "
-"X \n"
-"\t\t\tmed brug af 'drak'-værktøjer. Dette aktiveres ved oprettelse af "
-"separate \n"
-"\t\t\tkonfigureringsfiler tilknyttet klientens IP-adresse og oprettelse af \n"
-"\t\t\tmonteringspunkter med skriveadgang for at tillade klienten at ændre "
-"filen. \n"
-"\t\t\tNår du er tilfreds med konfigurationen kan du fjerne root-"
-"rettighederne \n"
-"\t\t\tfra klienterne.\n"
-"\n"
-"Bemærk: Du skal stoppe/starte serveren efter at have tilføjet eller ændret "
-"klienter."
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Vedligeholdelse af /etc/exports:\n"
-"        \t\tClusternfs lader dig eksportere rod-filsystemet til diskløse "
-"klienter, drakTermServ\n"
-"        \t\topsætter de rigtige indgange for at tillade anonym adgang til "
-"rod-filsystemet fra\n"
-"        \t\tdiskløse klienter.\n"
-"\n"
-"        \t\tEn typisk eksporterings-indgang for clusternfs er:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASKE(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tHvor SUBNET/MASKE bliver defineret for dit netværk."
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - Vedligeholdelse af %s:\n"
-"        \t\tFor at brugere skal kunne logge ind på systemet fra en diskløs "
-"klient, så må deres indgang i\n"
-"        \t\t/etc/shadow kopieres ind i %s. drakTermServ hjælper til\n"
-"        \t\tved at tilføje og slette brugere fra denne fil."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - Per klient %s:\n"
-"        \t\tVia clusternfs kan hver diskløs klient have deres egen unikke "
-"konfigurationsfil\n"
-"        \t\tpå rod-filsystemet på serveren. I fremtiden vil drakTermServ "
-"kunne hjælpe til med at lave disse\n"
-"        \t\tfiler."
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - Per klient systemkonfigurationsfiler:\n"
-"        \tVia clusternfs kan hver diskløs klient have deres egne unikke "
-"konfigurationsfiler\n"
-"        \tpå rod-filesystemet på serveren. Ved at tillade lokal "
-"klientudstyrskonfiguration kan klienter tilrette filer\n"
-"        \tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard på per klient\n"
-"        \tbasis. \n"
-"........Bemærk: Aktivering af lokal klientudstyrskonfiguration aktiverer "
-"ikke root logind til terminalserveren \n"
-"........fra hver klientmaskine som har denne facilitet aktiveret. Lokal "
-"konfiguration kan blive \n"
-"........slået fra igen, idet konfigurationsfilerne beholDES, når først "
-"klientmaskinen er blevet konfigureret."
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ vil konfigurere denne fil til at virke sammen med "
-"aftryksfilerne som bliver oprettet af\n"
-"        \t\tmkinitrd-net, og indgangene i /etc/dhcpd.conf, for at udlevere "
-"netværks-opstartsaftryksfilerne til hver \n"
-"        \t\tdiskløs klient.\n"
-"\n"
-"        \t\tEn typisk tftp-konfigurationsfil ser sådan ud:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \t\tÆndringen her fra den normale installation er ændringen af "
-"disable-flaget til\n"
-"        \t\t'no' og ændring af filstien til /var/lib/tftpboot, hvor mkinitrd-"
-"net\n"
-"        \t\tplacere sine aftryksfiler."
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Start fra diskette"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "Start fra ISO"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "PXE-aftryk"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "Standard kerne-version"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr "Lav PXE-billeder."
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Opbyg hele kernen -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Ingen kerne valgt!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Byg enkel NIC -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "Ingen NIC valgt!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Byg alle kerner -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Slet"
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "Intet billede valgt!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Slet alle NBI'er"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Indikere at adgangskoden i systemets database er forskelligt fra\n"
-" den i TerminalServer-databasen.\n"
-"Slet/tilføj brugeren igen il TerminalServeren for at muliggøre logind."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Tilføj bruger -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Slet bruger"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "type: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "lokal konfig: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Tillad konfiguration\n"
-"af lokalt udstyr"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "Ingen opstartsbilleder oprettet!"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Tynd klient"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Tillad tynde klienter"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-"Synkronisér klientens X-tastatur-\n"
-"opsætning med serverens."
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Tilføj klient -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "type: tyk"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "type: tynd"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "Lokal konfigurering: falsk"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "lokal konfigurering: sand"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Redigér klient"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Deaktivér lokal konfiguration"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Slet klient"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Konfigurér dhcpd..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Skal genstarte Display Manager for at de fulde ændringer kan tage effekt. \n"
-"(service dm restart - fra konsollen)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-"Tynde klienter vil ikke virke med autologin. Skal autologin deaktiveres?"
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "Alle klienter vil bruge %s"
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Undernet:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Netmaske:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Rutere:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Undernetmaske:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Rundkastningsadresse:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Domænenavn:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "Navne-servere:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Start på IP-område:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "Slut på IP-område:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr "Tilføj TS-includes til eksisterende konfiguration"
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Udskriv konfiguration"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Konfiguration af dhcp-server"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"De fleste af disse værdier blev fundet\n"
-"fra dit kørende system.\n"
-"Du kan ændre dem efter behov."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Indsæt diskette:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Kunne ikke få adgang til disketten!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Diskette kan fjernes nu"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Intet tilgængeligt diskettedrev!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "PXE-aftryksfil er %s/%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "Fejl ved skrivning %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO-aftryk er %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Noget gik galt! - er mkisofs installeret?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Skal oprette /etc/dhcpd.conf først!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr "%s adgangskode forkerti Terminalserver - genskriver...\n"
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s er ikke en bruger...\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s er allerede en Terminalserverbruger\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "Kunne ikke tilføje %s i Terminalserver!\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "%s tilføjet i Terminalserver\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "Slettede %s...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "%s ikke fundet...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-"/etc/hosts.allow og /etc/hosts.deny allerede konfigureret - ikke ændret"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Konfiguration ændret - genstart clusternfs/dhcpd?"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Fejl!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Jeg kan ikke finde filen '%s' som jeg behøver."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Autoinstallationskonfigurering"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"Du er ved at konfigurere en automatisk installationsdiskette. Denne mulighed "
-"er lidt farlig, og må bruges med forsigtighed.\n"
-"\n"
-"Med denne mulighed vil du igen kunne køre installationen du gennemførte på "
-"denne maskine, med muligheden for at selv kunne ændre på nogen af "
-"indstillingerne.\n"
-"\n"
-"For maksimal sikkerhed vil partitioneringen og formateringen aldrig blive "
-"gennemført automatisk, uanset hvad du valgte under installationen.\n"
-"\n"
-"Tryk O.k. for at fortsætte."
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "afspil igen"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "manuel"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Konfiguration af automatiske skridt"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Vælg for hvert skridt om det skal være som under installationen, eller "
-"manuelt"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Laver autoinstallations-diskette"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Indsæt en anden tom diskette i drev %s (med drivere)"
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Laver autoinstallations-diskette (driver-diskette)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Velkommen.\n"
-"\n"
-"Parametrene for autokonfigurationen kan ses i afsnittene til venstre"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Tillykke!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Disketten er blevet genereret.\n"
-"Du kan nu gennemføre installationen igen."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Autoinstallation"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Tilføj et element"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Fjern det sidste element"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"Expect er en udvidelse til skriptingsproget TCL som tillader interaktive "
-"sessioner uden indblanding fra brugeren."
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "Gem adgangskoderne for dette system i drakbackup-konfigurationen."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"For en multisessions-cd vil kun den første session slette cdrw'en. Ellers "
-"bliver cdrw'en slettet før hver sikkerhedskopiering."
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"Denne valgmulighed vil gemme filer som er blevet ændret. Den nøjagtige "
-"opførsel afhænger af om inkremental eller differentiel tilstand er valgt."
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"Inkrementale sikkerhedskopier gemmer kun filer der er ændret eller er nye i "
-"forhold til den seneste sikkerhedskopi."
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Differentielle sikkerhedskopier gemmer kun filer der er ændrede eller er nye "
-"i forhold til den oprindelige sikkerhedskopi."
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"Dette bør være en lokal bruger eller epostadresse som du vil have "
-"sikkerhedskopieringsresultatene sendt til. Du behøver en fungerende "
-"postserver sat op på dit system."
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"Filer eller jokertegn listet i en .backupignore-fil i toppen af et "
-"katalogtræ vil ikke blive sikkerhedskopieret."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"For sikkerhedskopiering til andre medier bliver filer stadig oprettet på "
-"disken og så overflyttet til det andet medie. Aktivering af denne "
-"valgmulighed vil fjerne tar-filerne på disken efter sikkerhedskopieringen."
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"Nogen protokoller, såsom rsync, kan være konfigureret i server-enden. I "
-"stedet for at bruge en katalogsti bør du bruge 'module'-navnet for "
-"tjenestestien."
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"Tilpasset lader dig angive dine egne datoer og tidspunkter. De andre "
-"valgmuligheder bruger kørsels-delen i /etc/crontab"
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr "Intet medie valgt for cron-operation."
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr "Intet interval valgt for cron-operation"
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Interval cron er ikke tilgængelig endnu som ikke-root"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-"\"%s\" er hverken en gyldig epostadresse eller en eksisterende lokal bruger!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"\"%s\" er en lokal bruger, men du valgte ikke en lokal smtp, så du må bruge "
-"en fuldstændig epostadresse!"
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr "Listen over gyldige brugere er ændret, genskriver konfigurationsfil."
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "Gammel brugerliste:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "Ny brugerliste:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      DrakBackup Rapport \n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      DrakBackup Dæmon-Rapport\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Rapportdetaljer\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Total fremdrift"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s-eksisterer, skal den fjernes?\n"
-"\n"
-"Hvis du allerede har lavet denne proces skal du nok\n"
-" fjerne indgangen fra authorized_keys på serveren."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Det kan tage lidt tid at generere nøglerne."
-
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "Kan ikke starte %s."
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Ingen forespørgsel om adgangskode på %s ved port %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Dårlig adgangskode på %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Adgang nægtet ved overførsel af %s til %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Kan ikke finde %s på %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s svarer ikke"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"Overførsel klar.\n"
-"Du vil måske kontrollere at du kan logge ind på serveren med:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"uden at blive spurgt om en adgangskode."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "Ingen CDR/DVDR i drevet!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Ser ikke ud til at være et skrivbart medie!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Ikke sletbart medie!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Det kan tage lidt tid at slette mediet."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problem med rettigheder ved adgang til CD."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "Intet bånd i %s."
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Sikkerhedskopiér systemfiler..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Sikkerhedskopifiler for disk..."
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Sikkerhedskopiér brugerfiler..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Sikkerhedskopiér andre filer..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Fremdrift for sikkerhedskopiering af disk..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Ingen ændringer til sikkerhedskopi!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-"FTP forbindelsesproblem: Det var ikke muligt at sende dine backupfiler via "
-"FTP.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr "Fejl ved sending af fil via FTP. Ret venligst din FTP-konfiguration."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "filliste sendt via FTP: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via CD:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup aktiviteter via bånd:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr "Fejl ved sending af post. Din rapport blev ikke sendt."
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Fejl ved afsendelse af post. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Kan ikke oprette katalog!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Markér alle muligheder som du behøver.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Disse valgmuligheder kan sikkerhedskopiere og genskabe alle filer i dit /etc "
-"katalog.\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Lav sikkerhedkopi af dine systemfiler. (/etc kataloget)"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-"Brug inkremental/forskels-backup (overskriv ikke gamle sikkerhedskopier)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Brug inkrementalbackup"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "Brug forskelsbackupper"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Udelad kritiske filer (passwd, group, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Med denne valgmulighed vil du være i stand til at kunne genskabe\n"
-"enhver version af dit /etc katalog."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Markér alle brugere som du vil have med i din sikkerhedskopi."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "Udelad cache for netlæser"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Vælg filerne eller katalogerne og klik på 'O.k.'"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Fjern valgte"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Brugere"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Brug netværksforbindelse til sikkerhedskopiering"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Netmetode:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "Brug Expect for SSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "Opret/overfør sikkerhedskopieringsnøgler for SSH"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Overfør nu"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Andre (ikke drakbackup) nøgler findes allerede"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Værtsnavn eller IP."
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-"Kataloget (eller modulet) hvori sikkerhedskopien skal lægges på denne "
-"maskine."
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Husk denne adgangskode"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Behøver værtsnavn, brugernavn og adgangskode!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Brug CD/DVDROM til sikkerhedskopiering"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Vælg dit cd/dvd-drev"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Vælg din cd/dvd-mediastørrelse"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "Multi-session CD"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "CDRW-medie"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Slet dit CDRW-medie (1. session)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " Slet nu "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "DVD+RW-medie"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "DVD-R-medie"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "DVDRAM-enhed"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "Ingen cd-enhed defineret!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "brug bånd til sikkerhedskopieringen"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Endhedsnavnet der skal bruges til sikkerhedskopiering"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr "Tag sikkerhedskopi direkte til bånd"
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Tilbagespól ikke båndet efter sikkerhedskopieringen"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Slet båndet før sikkerhedskopieringen"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Skub båndet ud efter sikkerhedskopieringen"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Indtast kataloget hvortil der skal gemmes:"
-
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr "Kataloget hvortil der skal gemmes"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CDROM / DVDROM"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Diskdrev / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "timedrift"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "dagligt"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "ugentligt"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "månedligt"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "tilpasset"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Januar"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Februar"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Marts"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "April"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Maj"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Juni"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Juli"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "August"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "September"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Oktober"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "November"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "December"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Søndag"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Mandag"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Tirsdag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Onsdag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Torsdag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Fredag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Lørdag"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Brug dæmon"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Vælg tidsinterval mellem hver sikkerhedskopiering"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "Tilpasset opsætning/crontab indgang"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Minut"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Time"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Dag"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Måned"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Hverdag"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Vælg mediet for sikkerhedskopiering."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Forsikr dig gerne om at cron-dæmonen er med i dine tjenester."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-"Hvis din maskine ikke er tændt hele tiden, vil du måske gerne installere "
-"anacron."
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr "Bemærk at alle 'net'-medier også bruger disken for nærværende."
-
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr "Vælg komprimeringstype"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Brug .backupignore-filer"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "Send epost-rapport efter hver sikkerhedskopiering til:"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "SMTP-server for epost:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Slet tar-filer på disken efter sikkerhedskopiering til andet medie."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Hvad"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Hvor"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Hvornår"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Flere muligheder"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "Sikkerhedskopisted ikke konfigureret..."
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup konfiguration"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Vælg hvor du ønsker at sikkerhedskopiere"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "Harddisk brugt til at forberede sikkerhedskopiering til alle medier"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "over netværk"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "på cd-rom"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "på båndenhed"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Lav sikkerhedskopi af brugere"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (Standard er alle brugere)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Vælg hvad du vil sikkerhedkopiere"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Lav sikkerhedskopi af system"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Håndpluk bruger"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Vælg data for sikkerhedskopi..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Kilder for sikkerhedskopi: \n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemfiler:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Brugerfiler:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Andre filer:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Gem til diskdrev på stien: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tBegræns diskforbrug til %s MB\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Slet tar-filer på disken efter sikkerhedskopiering.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- Brænd på CD"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " på enhed: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (multi-session)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Gem på bånd på enhed: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr "\tTag sikkerhedskopi direkte til bånd\n"
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- Gem via %s på vært: %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t brugernavn: %s\n"
-"\t\t på sti: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Muligheder:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tUdelad systemfiler\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSikkerhedskopiering bruger tar og bzip2\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSikkerhedskopiering bruger tar og gzip\n"
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tSikkerhedskopiering bruger kun tar\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\tBrug .backupignore-filer\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tSend epost til %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tBruger SMTP-server %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Dæmon, %s via:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Diskdrev.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-cdrom.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Tape \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Netværk via FTP.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Netværk via SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Netværk via rsync.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Ingen konfiguration, klik på Vejleder eller Avanceret.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste over data som skal genskabes:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- Genskab systemfiler:\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - fra dato: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- Genskab brugerfiler:\n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- Genskab  andre filer:\n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste over data der er ødelagt:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Afmarkér eller fjern det gerne næste gang."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Sikkerhedskopifiler er ødelagte"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          Alle dine valgte data er blevet               "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "          genskabt uden fejl på %s       "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "        Genskab konfiguration     "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "O.k. at genskabe de andre filer."
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Brugerliste at genskabe (kun den nyeste dato per bruger er vigtig)"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "Vælg dato for genskabning:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Genskab fra disk."
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Indtast kataloget hvor sikkerhedskopier gemmes"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr "Katalog med sikkerhedskopier"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Vælg et andet medie at genskabe fra"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Andet medie"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Genskab system"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Genskab brugere"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Genskab andet"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "vælg sti at genskabe (i stedet for /)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "Sti, hvortil der skal genskabes"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Lav ny sikkerhedskopi før genskabning (kun for inkrementalbackupper)."
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "Fjern brugerkataloger før genskabning."
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr "Filnavntekst at søge efter (tom streng matcher alt):"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "Søg i sikkerhedskopier"
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "Ingen træffere fundet..."
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Genskab valgte"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-"Klik på dato/tid for at se sikkerhedskopifiler.\n"
-"Klik på filer med CTRL-tasten inde for at vælge flere filer."
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"Genskab valgt\n"
-"katalogpost"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Genskab valgte\n"
-"filer"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "Sikkerhedskopier fandtes ikke på %s."
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Genskab fra cd"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Indsæt cd'en med volumetiket %s\n"
-" i cd-enheden monteret på /mnt/cdrom"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Ikke korrekt cd-etiket. Cd'en har etiket %s."
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Genskab fra bånd"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Indsæt båndet med volumeetiket %s\n"
-" i båndenheden %s"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Ikke korrekt båndetiket. Båndet har etiket %s."
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Genskab via netværk"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Genskab via netværksprotokol: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Værtsnavn"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Stil til vært eller modul"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Adgangskode krævet"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Brugernavn krævet"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Værtsnavn krævet"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Sti eller modul krævet"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "Filer genskabte..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Genskabelse mislykkedes..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "%s ikke fundet..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Søg efter filer at genskabe"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Genskab alle sikkerhedskopier"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Tilpasset genskabelse"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Genskab fra katalog"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Kan ikke finde sikkerhedskopier til at genskabe...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Kontrollér at %s er den korrekte sti"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " og CD'en er i drevet"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-"Sikkerhedskopier på ikke-monterbart medie - Brug Katalog til at genskabe"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "Cd'en er på plads - fortsæt."
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "Bladr til nyt genskabelseslager."
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr "Kataloget hvorfra der skal genskabes"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Fremskridt for genskabelse"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Lav backup"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Genskab"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "De følgende pakker behøver at blive installeret\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Udvælg de data du vil genskabe..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Lav sikkerhedskopi af systemfiler"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Lav sikkerhedskopi af brugerfiler"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Lav sikkerhedskopi af andre filer"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Total fremdrift"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "Sender filer via FTP"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Sender filer..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Lav sikkerhedskopi nu ud fra konfigurationsfil"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Se konfiguration af sikkerhedskopiering."
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Konfiguration med vejleder"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Avanceret konfiguration"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Vis konfiguration"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "Vis seneste log"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Lav sikkerhedskopiering nu"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"ingen konfigurationsfil fundet \n"
-"klik på Vejleder eller Avanceret."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Fil"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Fil/_Afslut"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"Dit systems opstartsindlæser er ikke i framebuffer-tilstand. For at aktivere "
-"grafisk opstart, vælg en grafisk videotilstand fra "
-"opstartindlæserkonfigurationsværktøjet."
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "Ønsker du at konfigurere det nu?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Installér temaer"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Valg af grafisk opstatstema"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Tema"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Visningstema\n"
-"under konsol"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Opret nyt tema"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Forvalgt bruger"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Standard skrivebord"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Nej, jeg ønsker ikke automatisk login"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, jeg ønsker automatisk login med denne (bruger, skrivebord)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Systemtilstand"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Start X-vinduessystemet efter opstart"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-"Vælg venligst en videotilstand, den vil blive føjet til hver "
-"opstartsopføring valg nedenfor.\n"
-"Vær sikker på, at dit videokort understøtter tilstanden, du vælger."
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Mandriva Linux' værktøj til fejlrapportering"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Mandriva Linux Kontrolcenter"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Synkroniseringsværktøj"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Fritstående værktøjer"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msek"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Ekstern kontrol"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Programadministration"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Migrationsværktøj for MS Windows"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Vejledere til konfiguration"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr "Vælg Mandriva-værktøj:"
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"eller programnavn\n"
-"(eller fuld sti):"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Find pakke"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Pakke: "
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Kerne:"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"For at indsende en fejlrapport klik da på rapport-knappen.\n"
-"Dette vil åbne et vindue i en netlæser på %s\n"
-" hvor du vil finde en formular der kan udfyldes. Informationen vist ovenfor "
-"vil blive overført til den server. Nyttige ting at medtage i din rapport er "
-"uddata fra lspci, kerneversion og /proc/cpuinfo."
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Rapport"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Ikke installeret"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Pakke ikke installeret"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "ikke defineret"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Ændr tidszone"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Timezone - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Er dit maskin-ur sat til GMT?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "Network Time Protocol"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"Din maskine kan synkronisere sit ur\n"
-"med en ekstern tidsserver med NTP "
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Aktivér Network Time Protocol"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Server:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr "Kunne ikke synkronisere med %s."
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Nulstil"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Vi behøver installere ntp-pakken\n"
-" for at aktivere Network Time Protocol\n"
-"\n"
-"Ønsker du at installere ntp?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netværkskonfiguration (%d adaptorer)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Grænseflade:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Vent venligst"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Grænseflade"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Status"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Værtsnavn: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Konfigurér værtsnavn..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "LAN konfiguration"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Konfigurér lokalnetværk..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Anvend"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Administrér forbindelser"
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr "Enhed valgt"
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "IP-konfiguration"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "DNS-servere"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Søge-domæne"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "fast"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Anrbejdsgangskontrol"
-
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Linjeterminering"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Udløbstid for modem"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Brug låsefil"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Vent på ringetone før opringning"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "Optaget, vent"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "Lyd på modem"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Aktivér"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Deaktivér"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Medieklasse"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Modulnavn"
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "Mac-adresse:"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Bus"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Plads på bussen"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ingen ethernet netværksadapter er blevet fundet på dit system. Kør venligst "
-"værktøjet til maskinel konfiguration."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Fjern et netværksgrænsesnit"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Vælg netværksgrænsesnit, der skal fjernes:"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Et problem opstod ved sletning af netværksgrænsesnittet '%s': \n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "Tillykke, netværksgrænsesnittet '%s' er blevet slettet uden problemer"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "Ingen IP"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Ingen maske"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "op"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "ned"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Tilsluttet"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Ikke tilsluttet"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Afbrud..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Tilslut..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der måske bruger "
-"dit netværk"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "Deaktivér nu"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "Aktivér nu"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Du har ingen konfigurerede grænsesnit.\n"
-"Konfigurér disse først ved at klikke på 'Konfigurér'"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "LAN konfiguration"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Opstartsprotokol"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Startede med opstart"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Dette grænsesnit er ikke blevet konfigureret endnu.\n"
-"Kør 'Tilføj et grænsesnit'-hjælperen fra Mandriva Linux Kontrolcentret"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Du har ikke konfigureret nogen internetforbindelser.\n"
-"Kør '%s'-hjælperen fra Mandriva Linux Kontrolcentret"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Opsætning af et nyt netværkgrænsesnit (LAN, ISDN, ADSL, ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "Tredje DNS-server (valgfri)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration af Internetforbindelse"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Internetadgang"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Type af forbindelse"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Status:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr "GDM (GNOME Indlogningshåndterer)"
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr "KDM (KDE Indlogningshåndterer)"
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr "MdkKDM (Mandriva Linux Indlogningshåndterer)"
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr "XDM (X Display Manager)"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Vælger en fremvisningshåndtering"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"X11 skærmhåndtering giver dig mulighed for grafisk indlogning på dit system "
-"med X Windowssystemet kørende, og understøtter flere forskellige X-sessioner "
-"på din lokale maskine samtidigt."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Ændringen er udført, ønsker du at genstarte dm-tjenesten?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-"Du er ved at lukke alle kørnede programmer og tabe din nuværende session. Er "
-"du sikker på at du ønsker at genstarte dm-tjenesten?"
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "Fremstilling af opstartsdiskette"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Generelt"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Enhed"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Kerne-version"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Præferencer"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Avancerede foretrukne"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Størrelse"
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Mkinitrd valgfrie argumenter"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "tving"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "undgå raid-moduler"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "hvis nødvendigt"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "undgå scsi-moduler"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Tilføj et modul"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Fjern et modul"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Forsikr dig at der er et medie tilstede i enheden %s"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Der er ikke noget media, eller det er skrivebeskyttet, i enhed %s.\n"
-"Indsæt venligst noget."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Kan ikke fork(): %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Fremstilling af diskette fuldført."
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "Oprettelsen af opstartsdisketten er færdig\n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Kan ikke lukke mkbootdisk ordentligt: \n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Søg efter installerede skrifttyper"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Fravælg installerede skrifttyper"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "fortolk alle skrifttyper"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "Ingen skrifttyper fundet"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "færdig"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "Kunne ikke finde nogen skrifttype i dine monterede partitioner"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Genvælg korrekte skrifttyper"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "Kunne ikke finde nogen skrifttype.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Søg efter skrifttyper i installeret liste"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "Konvertering af %s-skrifttyper"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Kopi af skrifttyper"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Installation af True Type-skrifttyper"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "Vent venligst på ttmkfdir..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "Installation af True Type færdig"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "opbyg type1inst"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencer"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Undertryk midlertidige filer"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Genstart XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Undertryk skrifttypefiler"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "genstart af xfs"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Før du installerer nogen skrifttyper bør du være sikker på at du har lov til "
-"at bruge og installere dem på dit system. \n"
-"\n"
-"-Du kan installere skrifttyperne på normal måde. I sjældne tilfælde kan "
-"fejlbehæftede skrifttyper få din X-server til at hænge."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Liste over skrifttyper"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Om"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Afinstallering"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Importér"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"Copyright (C) 2001-2002 ved Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (oprindelig version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Dette program er gratis programmel; du kan redistribuere det og/eller ændre\n"
-"det i henhold til betingelserne i GNU General Public License, som publiceret "
-"af\n"
-"Free Software Foundation; enten version 2, eller enhver senere udgave\n"
-"af licensen.\n"
-"\n"
-"Dette program er udgivet i håb om at det vil være anvendeligt, men\n"
-"UDEN NOGEN FORM FOR GARANTI; heller ikke garanti om\n"
-"SALGBARHED eller EGNETHED TIL ET BESTEMT FORMÅL. Se GNU\n"
-"General Public License for flere detaljer.\n"
-"\n"
-"\n"
-"Du skulle have modtaget en kopi af GNU General Public License\n"
-"sammen med dette program; hvis ikke, skriv til Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"Tak til:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t af Ken Borgendale:\n"
-"\t    Konvertér en Windows .pfm-file til en .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t af James Macnicol: \n"
-"\t    type1inst genererer filerne fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  af Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Konvertér ttf-fontfiler til afm og pfb skrifttyper\n"
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Vælg de programpakker som vil understøtte skrifttyperne:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Før du installerer nogen skrifttyper bør du være sikker på at du har lov til "
-"at bruge og installere dem på dit system. \n"
-"\n"
-"-Du kan installere skrifttyperne på normal måde. I sjældne tilfælde kan "
-"fejlbehæftede skrifttyper få din X-server til at hænge."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Generelle printere"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Vælg skrifttypefilen eller -kataloget oh klik på 'Tilføj'"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Valg af filer"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr "Skrifttyper"
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Import af skrifttyper"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Installér skrifttyper"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "Klik her hvis du er sikker."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "Her hvis ikke."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Fravalgte alt"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Valgte alt"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Fjern liste"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "Importerer skrifttyper"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Begyndelsestester"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Kopiér skrifttyper på dit system"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Installér og konvertér skrifttyper"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Efterbehandling for installering"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Fjern skrifttyper på dit system"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Efterbehandling for afinstallering"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Deling af internetforbindelse"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Desværre, vi understøtter kun 2.4-kerner og nyere."
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Deling af internetforbindelse er slået fra"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Den er de-aktiveret for nærværende\n"
-"Hvad ønsker du at gøre?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "aktivér"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "genkonfigurér"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "forkast"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Aktiverer servere..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Deling af internetforbindelse er nu slået til"
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Deling af internetforbindelse er slået til"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstilling af deling af internetforbindelse er allerede gjort.\n"
-"Deling er aktiveret.\n"
-"\n"
-"Hvad ønsker du at gøre?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "deaktivér"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Slår servere fra..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Deling af internetforbindelse er nu slået fra"
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er ved at konfigurere din maskine til at dele sin internetforbindelse.\n"
-"Med denne mulighed vil andre maskiner på dit lokale netværk kunne bruge "
-"internetforbindelsen på denne maskine.\n"
-"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect før du går videre.\n"
-"\n"
-"Bemærk: du skal bruge en dediceret netværksadapter, for at lave et lokalt "
-"netværk (LAN)."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Grænseflade %s (benytter modul %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Grænseflade %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Ikke nogen netværksadapter i dit system!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Netværksgrænsesnit"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Der er kun én konfigureret netværksadapter i dit system:\n"
-"\n"
-"%s\n"
-"\n"
-"Jeg skal til at sætte dit lokalnet på med den adapter."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Vælg netværksgrænsesnit"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Vælg hvilken netværksadapter som skal forbindes til dit lokalnet."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Netværksgrænsesnit allerede konfigureret"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Advarsel, netværkskortet (%s) er allerede konfigureret.\n"
-"\n"
-"Ønsker du en automatisk re-konfiguration?\n"
-"\n"
-"Du kan gøre det i hånden, men du skal vide hvad du gør."
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatisk rekonfiguration"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "Nej (kun eksperter)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Vis aktuelle grænsesnitskonfiguration"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Aktuelle grænsesnitskonfiguration"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Nuværende konfiguration af `%s':\n"
-"\n"
-"Netværk: %s\n"
-"IP-adresse: %s\n"
-"IP-attribut: %s\n"
-"Driver: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Jeg kan beholde din aktuelle konfiguration og antage at du allerede har sat "
-"en DHCP-server op; i så tilfælde kontrollér da gerne at jeg har læst det "
-"netværk du bruger til dit lokalnet korrekt; jeg vil ikke genkonfigurere det "
-"og jeg vil ikke røre ved din konfiguration af DHCP-serveren.\n"
-"\n"
-"Den normale DNS-indgang er den cahcendde navneserver konfigureret på "
-"bransmuren. Du kan eksempelvis erstatte denne med din ISPs DNS-adresse.\n"
-"\n"
-"Ellers kan jeg genkonfigurere dit grænsesnit og genkonfigurere en DHCP-"
-"server for dig.\n"
-"\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Adresse på lokalnetværk"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"Konfiguration af DHCP-server.\n"
-"\n"
-"Her kan du vælge forskellige muligheder for konfigurationen af DHCP-"
-"serveren.\n"
-"Hvis du ikke kender betydningen af en valgmulighed, så lad den blot være som "
-"den er."
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Denne) DHCP-servers IP-adresse"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "DHCP-serverens IP-adresse"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Det interne domænenavn"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "Begyndelsen på DHCP-området"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "Stutningen på DHCP-området"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Normal udlejningsperiode (i sekunder)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Største udlejningsperiode (i sekunder)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Rekonfigurér grænsesnit og DHCP-server"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Lokalnetværket endte ikke med `.0', står af."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Mulig LAN-adresse konflikt fundet i konfigurationen til %s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Konfigurerer..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfigurerer skript, installerer programmel, starter servere..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemer med installation af %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Alt er blevet konfigureret.\n"
-"Du kan nu dele din internetforbindelse med andre maskiner på dit lokale "
-"netværk, ved at bruge automatisk netværkskonfigurering (DHCP)\n"
-"og en usynlig proxy-bufferserver (SQUID)."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"Copyright © 2003-2005 Mandriva.\n"
-"Dette er frit programmel og kan redistribueres under betingelserne i GNU "
-"GPL.\n"
-"\n"
-"Brug: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - vis denne hjælpetekst     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_label>       - indlæs html-hjælpesiden som refererer til id_label\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-" --doc <link>          - henvis til en anden webside ( for WM-"
-"velkomstforside)\n"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Mandriva Linux hjælpecentral"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"%s kan ikke vises \n"
-"Ingenhjælpeindgang af denne type\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Systemindstillinger"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Brugerdefinerede indstillinger"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Brugerdefinerede indstillinger og systemindstillinger"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Kan redigeres"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Sti"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Bruger"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Gruppe"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Rettigheder"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr "Tilføj en ny regel"
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Redigér aktuelle regel"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Her kan du se filer til brug for at rette tilladelser, ejere og grupper via "
-"msec.\n"
-"Du kan også redigere dine egne regler som vil tilsidesætte standard-reglerne."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"Det aktuelle sikkerhedsniveau er %s\n"
-"Vælg rettigheder at vise eller redigere"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Op"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Flyt valgte regel et niveau op"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Ned"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Flyt valgte regel et niveau ned"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "Tilføj en regel"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Tilføj en ny regel i slutningen"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Slet valgte regel"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Redigér"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "bladr"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "bruger"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "gruppe"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "andet"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Læs"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "Aktivér '%s' for at læse filen"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Skriv"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "Aktivér '%s' for at skrive filen"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Udfør"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Aktivér '%s' for at udføre filen"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Brugt til katalog:\n"
-" kun ejeren af kataloget eller filen i dette katalog kan slette den"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Brug ejers id ved udførelsen"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Brug gruppe-id ved udførelsen"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Bruger:"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Gruppe:"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Aktuelle bruger"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "Ved kontrol vil ejer og gruppe ikke blive ændret"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Valg af sti"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Egenskab"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Konfiguration af PXE-server"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Konfiguration af installations-server"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Du er ved at konfigurere din maskine til at installere en PXE-server som en "
-"DHCP-server og en TFTP-server for at bygge en installationsserver.\n"
-"Med denne mulighed vil andre maskiner på dit lokale netværk kunne "
-"installeres ved brug af denne maskine.\n"
-"\n"
-"Forsikr dig om at du har konfigureret din internetforbindelse med "
-"drakconnect før du går videre.\n"
-"\n"
-"Bemærk: du skal bruge en dediceret netværksadapter, for at lave et lokalt "
-"netværk (LAN)."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Vælg hvilken netværksgrænseflade som skal bruges til dhcp-serveren."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Grænseflade %s (på netværk %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"DHCP-serveren vil muliggøre at andre maskiner kan starte op med PXE ved brug "
-"af det opgivne adresseområde.\n"
-"\n"
-"Netværksadressen er %s med en netmaske på %s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "Begyndelses-ip på DHCP"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "Stutnings-ip på DHCP"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Angiv venligst hvor installationsaftrykket vil være tilgængeligt.\n"
-"\n"
-"Hvis du ikke har et eksisterende katalog, så kopiér venligst indholdet af "
-"CD'en eller DVD'en.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Katalog for installationsaftryk"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Intet aftryk fundet!"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Intet CD- eller DVD-aftryk fundet, kopiér venligst installationsprogrammet "
-"og rpm-filerne."
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Angiv venligst hvor auto_install.cfg-filen er placeret.\n"
-"\n"
-"Lad den være blank hvis du ikke ønsker at opsætte en automatisk "
-"installationstilstand.\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Placering af auto_installations .cfg-fil"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr "ESSID"
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Tilstand"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Kanal"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr "Nøgle"
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Netværk:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Tilstand:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Kryptering:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Signal:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr "Viderestilling"
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr "Viderestilling: %s"
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "fra"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr "Skanningsinterval (sekunder): "
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr "Sæt"
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr "Kendte netværk (Træk op eller ned, eller redigér)"
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Forbind"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr "Tilgængelige netværk"
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Genskan"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Status"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Afbryd forbindelse"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Genopfrisk"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "på"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "ALL"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "LOCAL"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Ignorér"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"Her kan du opsætte sikkerhedsniveauet og -administrator for din maskine\n"
-"\n"
-"\n"
-"'<span weight=\"bold\">Sikkerhedsadministratoren</span>' er den som vil "
-"modtage '<b>sikkerhedspåmindelser</b>', \n"
-"hvis muligheden '<span weight=\"bold\">Sikkerhedspåmindelser</span>' er "
-"aktiveret. Det kan være et \n"
-"brugernavn eller en epostadresse.\n"
-"\n"
-"\n"
-"Menuen for '<span weight=\"bold\">sikkerhedsniveau</span>' tillader at vælge "
-"et af de seks prækonfigurerede \n"
-"sikkerhedsniveauer som leveres af msec. Disse niveauer spænder fra '<span "
-"weight=\"bold\">ringe<span>' \n"
-"sikkerhed og nem brug til en '<b>paranoid</span>' konfigurering, der er "
-"passende til meget\n"
-"følsomme server-opsætninger:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Ringe</span>: Dette sikkerhedsniveau er "
-"totalt usikkert men \n"
-"meget nemt at anvende. Det bør kun bruges af maskiner der \n"
-"ikke er forbundet til noget netværk, og som ikke er tilgængeligt for "
-"enhver.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: Dette er standard "
-"sikkerheden \n"
-"anbefalet for en maskine som vil blive brugt til opkobling på internettet "
-"som klient.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Høj</span>: Der er allerede en del "
-"begrænsninger, og flere automatiske kontroller vil bliver kørt hver nat.\n"
-"\n"
-"<span foreground=\"royalblue3\">Højere</span>: Sikkerheden er nu høj nok til "
-"at \n"
-"bruge systemet som en server som kan tage imod forbindelser fra mange "
-"klienter. \n"
-"Hvis din maskine kun er en klient på internettet, bør du vælge et lavere "
-"niveau.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: Dette ligner det \n"
-"foregående niveau, men systemet er helt lukket og\n"
-"sikkerhedsfaciliteter er på deres højeste"
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Beskrivelse af felterne:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(Standard: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Sikkerhedsniveau:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Sikkerhedsadministrator:"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "Basale valgmuligheder"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Netværkstilvalg"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Systemtilvalg"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Periodiske kontroller"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Vent venligst, sætter sikkerhedsniveau..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Vent venligst, sætter sikkerhedstilvalg..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Intet lydkort genkendt!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Intet lydkort blev genkendt på din maskine. Tjek venligst at et lydkort der "
-"understøttes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan besøge vores database over udstyr på:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Bemærk: Hvis du har et ISA PnP lydkort skal du bruge alsaconf- eller sndconf-"
-"programmet. Du skal blot indtaste 'alsaconf' eller 'sndconfig' i et terminal-"
-"program."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"pakken ImageMagick kræves for at det skal fungere korrekt. Klik på 'O.k.' "
-"for at installere 'ImageMagick' eller 'Annullér' for at afslutte"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr "antal tegn i tekstrudens x-led"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr "antal tegn i tekstrudens y-led"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "tekstbredde"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "højde på tekstrude"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"x-koordinatet for forløbsindikatorens\n"
-"øvre venstre hjørne"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"y-koordinatet for forløbsindikatorens\n"
-"øvre venstre hjørne"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "bredden på forløbslinjen"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "højden på forløbslinjen"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Vis logo på konsol"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Tema-navn"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "endelig opløsning"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "gem temaer"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "gemmer startskærmstema..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "vælg billede"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Valg af farve for forløbslinje"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr "Forbundet via en seriel port eller et usb-kabel"
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "Tilføj en UPS-enhed"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Velkommen til programmet for konfigurering af UPS.\n"
-"\n"
-"Her vil du kunne tilføje en UPS til dit system.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-"Vi er ved at tilføje en UPS-enhed.\n"
-"\n"
-"Foretrækker du at automatisk finde UPS-enheder forbundet til denne maskine, "
-"eller?"
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "Automatisk detektion"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Søgning udføres"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Tillykke"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "Hjælperen tilføjede de følgende UPS-enheder uden problemer:"
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "Ingen nye UPS-enheder blev fundet"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "Konfiguration af UPS-driver"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "Vælg din UPS-model."
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "Producent og model"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-"Vi er ved at konfigurere \"%s\"-UPS'en fra \"%s\".\n"
-"Udfyld venligst navnet, driveren og porten på den."
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Navn:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr "Navnet på UPS'en"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr "Driveren som styrer din UPS"
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Port:"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "Porten som din UPS er forbundet til"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "Hjælperen konfigurerede den nye '%s' UPS-enhed uden problemer."
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "UPS-enheder"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Navn"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "UPS-brugere"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr "adgangskontrollister"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr "IP-maske"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Regler"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Handling"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Niveau"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "ACL-navn"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUPS"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Velkommen tol konfigurationsværktøjerne for UPS"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "VPN-forbindelsen er aktiveret."
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Indstillingen af en VPN-forbindelse er allerede gjort.\n"
-"\n"
-"Det er aktiveret nu.\n"
-"\n"
-"Hvad ønsker du at gøre?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "Deaktiverer VPN..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "VPN-forbindelse er nu slået fra."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "VPN-forbindelse er slået fra for øjeblikket"
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Opsætningen for en VPN-opkobling er allerede blevet gjort.\n"
-"\n"
-"Dette er for øjeblikket deaktiveret.\n"
-"\n"
-"Hvad vil du gøre?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "Aktiverer VPN..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "VPN-opkobling er aktiveret nu."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "Simpel VPN-opsætning."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-"Du er ved at konfigurere din maskine til at bruge en VPN-opkobling.\n"
-"\n"
-"Med denne facilitet kan maskiner på dit lokale, private netværk og maskiner\n"
-"på andre fjerne, private netværker dele resurser igennem deres respektive\n"
-"brandmure over Internet på en sikker måde. \n"
-"\n"
-"Kommunikationen over internettet er krypteret. De lokale og fjerne maskiner\n"
-"ser ud som om de er på samme netværk.\n"
-"\n"
-"Vær sikker på at du har konfigureret din netværks/internetadgang ved at "
-"bruge\n"
-"drakconnect før du går videre."
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-"VPN-opkobling.\n"
-"\n"
-"Dette program er baseret på følgende projekter:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - dokumenterne og man-siderne kommer med %s-pakken\n"
-"\n"
-"Læs venligst i det mindste ipsec-howto-dokumenterne\n"
-"før du går videre."
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Kerne-modul."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-"Kernen har ikke ipsec-støtte.\n"
-"\n"
-"Du kører en %s-kerneversion.\n"
-"\n"
-"Denne kerne har '%s'-støtte"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Sikkerhedspolitik"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "IKE-dæmon racoon"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Konfigurationsfil"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-"Konfigurationstrin!\n"
-"\n"
-"Du behøver at definere Sikkerhedsretningslinjerne for så at \n"
-"konfigurere den automatiske nøgleludvekslings- (IKE) dæmon. \n"
-"KAME IKE-dæmonen som vi bruger kaldes 'racoon'.\n"
-"\n"
-"Hvad ønsker du at konfigurere?\n"
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-"Så vil vi konfigurere %s-filen.\n"
-"\n"
-"\n"
-"Klik simpelthen på Næste.\n"
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s indgange"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-"%s-filens indhold\n"
-"er delt op i flere afsnit.\n"
-"\n"
-"Du kan nu:\n"
-"\n"
-"  - vise, tilføje, ændre eller fjerne afsnit, for så at\n"
-"  - udføre ændringerne\n"
-"\n"
-"Hvad ønsker du at gøre?\n"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Vis"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Udfør"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Vís konfiguration"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-"%s-filen eksisterer ikke.\n"
-"\n"
-"Det må være en ny konfiguration.\n"
-"\n"
-"Du skal gå tilbage og vælge 'tilføj'.\n"
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "ipsec.conf-indgange"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"%s-filen indeholder forskellige afsnit.\n"
-"\n"
-"Her er dets opbygning:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"Du kan nu tilføje et af disse afsnit.\n"
-"\n"
-"Vælg afsnittet du ønsker at tilføje.\n"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "config opsætning"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "normal forbindelse"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Eksisterer!"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-"Et afsnit med dette navn eksisterer allerede.\n"
-"Afsnitsnavne skal være unikke.\n"
-"\n"
-"Du må gå tilbage og tilføje et andet afsnit\n"
-"eller ændre dets navn.\n"
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Dette afsnit skal være på toppen af din\n"
-"%s-fil.\n"
-"\n"
-"Vær sikker på at alle afsnit følger denne konfigurations\n"
-"opsætningsafsnit.\n"
-"\n"
-"Vælg fortsæt eller forrige når du er færdig.\n"
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "grænseflader"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsdebug"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "plutodebug"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "plutoload"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "plutostart"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "uniqueids"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-"Dette er det første afsnit efter\n"
-"konfigurationsopsætningen.\n"
-"\n"
-"Her kan du definere standardindstillingerne. \n"
-"Alle de andre afsnit vil følge dette.\n"
-"venstre-opsætninger er valgfrie. Hvis du ikke,\n"
-"definerer dem her (globalt), kan du definere dem\n"
-"i hvert afsnit.\n"
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "venstre"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Din %s-fil har flere afsnit, eller opkoblinger.\n"
-"\n"
-"Du kan nu tilføje et nyt afsnit.\n"
-"Vælg fortsæt når du er klar til at skrive dataene.\n"
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "afsnitsnavn"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "auto"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "højre"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "rightcert"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnexthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-"Et afsnit med dette navn eksisterer allerede.\n"
-"Afsnitsnavnet skal være unikt.\n"
-"\n"
-"Du må gå tilbage og tilføje et nyt afsnit\n"
-"eller ændre navnet på afsnittet.\n"
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Tilføj en sikkerhedsretningslinje.\n"
-"\n"
-"Du kan nåu tilføje en sikkerhedsretningslinje.\n"
-"\n"
-"Vælg fortsæt når du er klar til at skrive dataene.\n"
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Redigér afsnit"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-"Din %s-fil har flere afsnit eller forbindelser.\n"
-"\n"
-"Du kan vælge her nedenunder den du ønsker at \n"
-"ændre, og så klikke på næste.\n"
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Afsnitsnavne"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "Kan ikke redigere!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-"Du kan ikke ændre på dette afsnit.\n"
-"\n"
-"Dette afsnit er obligatorisk for Freeswan 2.X.\n"
-"Man må specificere version 2.0 på toppen\n"
-"af %s-filen, og eventuelt deaktivere eller\n"
-"aktivere opportunistisk kryptering.\n"
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Din %s-fil har flere afsnit.\n"
-"\n"
-"Du kan nu redigere config-afsnittets indgange.\n"
-"Vælg fortsæt når du klar til at skrive dataene.\n"
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Din %s-fil har flere afsnit.\n"
-"\n"
-"Du kan nu redigere default-afsnittets indgange.\n"
-"Vælg fortsæt når du klar til at skrive dataene.\n"
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Din %s-fil har flere afsnit eller forbindelser.\n"
-"\n"
-"Du kan nu ændre normal-afsnittets indgang.\n"
-"\n"
-"Vælg fortsæt når du er klar til at skrive dataene.\n"
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Redigér en sikkerhedsretningslinje.\n"
-"\n"
-"Du kan nu tilføje en sikkerhedsretningslinje.\n"
-"\n"
-"Vælg fortsæt når du er klar til at skrive dataene.\n"
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Fjern afsnit"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-"Din %s-fil har flere afsnit eller opkoblinger.\n"
-"\n"
-"Du kan her vælge nedenunder den du ønsker at \n"
-"fjerne, og så klikke på næste.\n"
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-"racoon.conf-filens konfiguration.\n"
-"\n"
-"Indholdet af denne fil er delt op i flere afsnit.\n"
-"Du kan nu:\n"
-"  - display\t\t (vis filens indhold)\n"
-"  - add\t\t\t (tilføj et afsnit)\n"
-"  - edit \t\t\t (redigér parametre til en eksisterende opkobling)\n"
-"  - remove \t\t (fjern et eksisterende afsnit)\n"
-"  - commit \t\t (skriver ændringene til den virkelige fil)"
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-"%s-filen eksisterer ikke\n"
-"\n"
-"Dette må være en ny konfiguration.\n"
-"\n"
-"Du må gå tilbage og vælge konfigurér.\n"
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "racoon.conf-indgange"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"'add'-trinnet.\n"
-"\n"
-"Nedenfor er racoon.conf-filopbygningen :\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo'\n"
-"\n"
-"Vælg afsnittet du ønsker at tilføje.\n"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "sti"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "fjern"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-"'add path'-afsnit-trinet.\n"
-"\n"
-"path-afsnittene skal være i toppen af din racoon.conf-fil.\n"
-"\n"
-"Bevæg din mus over certifikatindgangen for at få onlinehjælp."
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "Sti type"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-"path include sti: specificerer en sti for at inkludere\n"
-"en fil, Se filinkludering.\n"
-"\tEksempel: path include '/etc/racoon'\n"
-"\n"
-"path pre_share_key fil: specificer en fil som indeholder\n"
-"forhåndsdelte nøgler for forskellige ID'er. Se forhåndsdelt nøglelfil.\n"
-"\n"
-"path certificate sti: racoon(8) vil gennemsøge dette katalog\n"
-"hvis et certifikat eller en certifikatforespørgsel modtages.\n"
-"\tEksempel: path certificate '/etc/cert' ;\n"
-"\n"
-"Filinkludering: inklusions-fil \n"
-"andre konfigurationsfiler kan blive inkluderet.\n"
-"\tEksempel: include \"remote.conf\" ;\n"
-"\n"
-"Forhåndsdelt nøglefil: Forhåndsdelt nøglefil definerer et par\n"
-"med identifikatoren og den delte, hemmelige nøgle som bruges\n"
-"i forhåndsdelt nøgleautentificeringsmetode i fase 1."
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "rigtig fil"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Vær sikker på at du allerede har path-afsnittene\n"
-"i toppen af din racoon.conf-fil.\n"
-"\n"
-"Du kan nu vælge fjernindstillinger\n"
-"Vælg fortsæt eller forrige når du er færdig.\n"
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Vær sikker på at du allerede har path-afsnittene\n"
-"i toppen af din %s-fil.\n"
-"\n"
-"Du kan nu vælge sainfo-indstillingerne.\n"
-"Vælg fortsæt eller forrige når du er færdig.\n"
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-"Din %s-fil har flere afsnit eller opkoblinger.\n"
-"\n"
-"Du kan her vælge i listen nedenfor den du ønsker\n"
-"at ændre, og så klikke på næste.\n"
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Din %s-fil har flere afsnit.\n"
-"\n"
-"\n"
-"Du kan nu redigere remote-afsnitets indgange.\n"
-"\n"
-"Vælg fortsæt når du er klar til at skrive dataene.\n"
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-"Din %s-fil har flere afsnit.\n"
-"\n"
-"Du kan nu redigere config-afsnittets indgange.\n"
-"\n"
-"Vælg fortsæt når du klar til at skrive dataene."
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Dette afsnit skal være i toppen af din\n"
-"%s-fil.\n"
-"\n"
-"Vær sikker på at alle afsnit har følgende\n"
-"path-afsnit.\n"
-"\n"
-"Du kan nu redigere path-indgange.\n"
-"\n"
-"Vælg fortsæt eller forrige når du er færdig.\n"
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "path_type"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-"Alt er blevet konfigureret.\n"
-"\n"
-"Du kan nu dele ressurser over internettet,\n"
-"på en sikker måde ved hjælp af en VPN-opkobling.\n"
-"\n"
-"Du bør forsikre dig om at tunnels shorewall-afsnittet\n"
-"er konfigureret."
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr "Sainfo kildeadresse"
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"definerer parametrene for IKE phase 2\n"
-"(IPsec-SA etablering\n"
-"\n"
-"source_id og destination_id er konstrueret som:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Eksempler : \n"
-"\n"
-"sainfo anonymous (accepterer opkoblinger fra hvor som helst)\n"
-"\tlad denne indgang være tom hvis du ønsker anonym adgang\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 er kildeadressen\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 er kildeadressen"
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr "Sainfo kildeprotokol"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"definerer parametrene til IKE phase 2\n"
-"(IPsec-SA etablering\n"
-"\n"
-"source_id og destination_id er konstrueret som:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Eksempler: \n"
-"\n"
-"sainfo anonymous (accepterer opkoblinger fra hvor som helst)\n"
-"\tlad denne indgang være tom hvis du ønsker anonym adgang\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tden første 'any' tillader hvilken som helst protokol for kilden"
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr "Sainfo måladresse"
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-"sainfosainfo (source_id destination_id | anonymous) { statements }\n"
-"definerer parametrene til IKE phase 2\n"
-"(IPsec-SA etablering\n"
-"\n"
-"source_id og destination_id er konstrueret som:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Eksempler: \n"
-"\n"
-"sainfo anonymous (accepterer opkoblinger fra hvor som helst)\n"
-"\tlad denne indgang være tom hvis du ønsker anonym adgang\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 er måladressen\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 er måladressen"
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr "Sainfo målprotokol"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-"sainfosainfo (source_id destination_id | anonymous) { statements }\n"
-"definerer parametrene til IKE phase 2\n"
-"(IPsec-SA etablering\n"
-"\n"
-"source_id og destination_id er konstrueret som:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Eksempler: \n"
-"\n"
-"sainfo anonymous (accepterer opkoblinger fra hvor som helst)\n"
-"\tlad denne indgang være tom hvis du ønsker anonym adgang\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tden sidste 'any' tillader hvilken som helst protkol for målet"
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "PFS-gruppe"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-"definér gruppen af Diffie-Hellman eksponentieringer.\n"
-"Hvis du ikke behøver PFS kan du undlate dette direktiv.\n"
-"Ethvert forslag vil blive accepteret hvis du ikke specificerer ét.\n"
-"'group' er en af de følgende: modp768, modp1024, modp1536.\n"
-"Ellers kan du definere 1, 2 eller 5 som DH-gruppenummeret."
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "Levetidsnummer"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-"Definer en levetid til en bestemt tid som vil blive\n"
-"foreslået i fase 1-forhandlinger.  Enhvert forslag\n"
-"vil blive accepteret, og attributterne vil ikke blive foreslået\n"
-"til maskinen, hvis du ikke specificerer dem.  De kan blive\n"
-"individuelt specificeret i hvert forslag.\n"
-"\n"
-"Eksempler: \n"
-"\n"
-" lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"Så her er levetidsnumrene 1, 1, 30, 30, 60 and 12.\n"
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "Levetidsenhed"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-"Definér en levetid til en bestemt tid som vil blive\n"
-"foreslået i fase 1-forhandlinger.  Enhvert forslag\n"
-"vil blive accepteret, og attributterne vil ikke blive foreslået\n"
-"til maskinen, hvis du ikke specificerer dem.  De kan blive\n"
-"individuelt specificeret i hvert forslag.\n"
-"\n"
-"Eksempler: \n"
-"\n"
-" lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"Så her er levetidsenhederne 'min, 'min', 'sek', 'sek', 'sek' og 'time'.\n"
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "autentifikationsalgoritme"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "Komprimeringsalgoritme"
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr "udfold"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Fjern"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specificerer parametrene for IKE fase 1 for hver fjern-node.\n"
-"Standardporten er 500. Hvis anonymous er specificeret, så vil\n"
-"udtrykkene gælde alle maskiner som ikke passer med nogen andre "
-"fjerndirektiver.\n"
-"\n"
-"Eksempler: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr "Udvekslings-tilstand"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-"definerer udvekslingstilstand for fase 1 når racoon er\n"
-"den der starter. Det er også den acceptable udvekslingstilstand\n"
-"når det er racoon. der svarer. Mere end én tilstand kan specificeres\n"
-"ved at skille dem med komma. Alle tilstandene er\n"
-"acceptable. Den første udvekslingstilstand er hvad racoon\n"
-"bruger når det er den, der starter.\n"
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "Generer retningslinje"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-"Dette direktiv er for svareren.  Derfor bør du\n"
-"sætte passive for at racoon(8) bare skal være en svarer.\n"
-"Hvis svareren ikke har en retningslinje i SPD under\n"
-"fase 2-forhandling, og direktivet er aktiveret, så vil\n"
-"racoon(8) vælge det første forslag i SA-payloaden\n"
-"fra opstarteren og generere retningslinjer fra forslaget.\n"
-"Det er nyttigt at forhandle med klienten som får\n"
-"tildelt IP-adresse dynamisk.  Bemærk at upassende\n"
-"retningslinjer kan være installeret på svarerens SPD\n"
-"af opstarteren. Så derfor kan kommunikationen fejle\n"
-"hvis sådanne retningslinjer er installeret pga. forskelle i retningslinjer\n"
-"hos opstarteren og svareren.  Dette direktiv ignoreres\n"
-"i opstarterens tilfælde.  Standardværdien er deaktiveret."
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "Passiv"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-"Hvis du ikke ønsker at initiere forhandlingen, sæt denne til\n"
-"on. Standardværdi er off. Dette er nyttigt for en\n"
-"server."
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "Certificeringstype"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "l"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "Navn på certifikat"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "Min private nøgle"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "Navn på privat nøgle"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr "Maskinens certifikatfil"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr "Navnet på maskinens certifikat"
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "Kontrollér certifikat"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-"Hvis du af en eller anden grund ikke ønsker at kontrollere\n"
-"maskinens certifikat. så sæt denne til off.  Standardværdi er on."
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "Min identifikator"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-"specificerer idenfikatoren sendt til fjern-vært og\n"
-"typen som skal bruges i fase 1-forhandling. address, FQDN,\n"
-"user_fqdn, keyid og asn1dn kan bruges som en idtype.\n"
-"de er brugt som::\n"
-"\tmy_identifier address [adresse];\n"
-"\t\ttypen er IP-adressen. Dette er standard\n"
-"\t\ttype hvis du ikke specificerer en identifikator som skal bruges.\n"
-"\tmy_identifier user_fqdn streng;\n"
-"\t\ttypen er en USER_FQDN (bruger med fuldt kvalificeret\n"
-"\t\tdomænenavn).\n"
-"\tmy_identifier FQDN streng;\n"
-"\t\ttypen er et FQDN (fuldt kvalificeret domænenavn).\n"
-"\tmy_identifier keyid fil;\n"
-"\t\ttypen er en KEY_ID.\n"
-"\tmy_identifier asn1dn [streng];\n"
-"\t\ttypen er et  ASN.1 distingveret navn.  Hvis\n"
-"\t\tstrengen er udeladt, så vil racoon(8) få DN fra\n"
-"\t\tEmnefelt i certifikatet.\n"
-"\n"
-"Eksempler : \n"
-"\n"
-"my_identifier user_fqdn \"min-epost@firma.dk\""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr "Maskinens identifikator"
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr "Forslag"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-"specificér krypteringsalgoritmen som skal bruges for\n"
-"fase1-forhandlingen. Dette direktiv skal være defineret. \n"
-"algoritme er en af følgende: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For andre transformeringer bør dette ikke bruges."
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "Hash-algoritme"
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "DH-gruppe"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Kommando"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "Kilde IP-område"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "Destinations IP-område"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "Øvre lag-protokol"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "enhver"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Flag"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Retning"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "IPsec-retningslinje"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "ipsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr "forkast"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr "tunnel"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr "transport"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Kilde/destination"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr "kræv"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "standard"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "brug"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "unik"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (broadcast)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "USA (kabel)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (kabel-hrc)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Canada (kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (broadcast)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "Kina (broadcast)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Vesteuropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Østeuropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Frankrig [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "New Zealand"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australsk Optus kabel-tv"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr "Indtast din tv-standard og land"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "Tv-standard:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Område:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Skanning for tv-kanaler i gang..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "Skanner for tv-kanaler"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Der opstod en fejl ved skanningen efter tv-kanaler"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Hav det godt!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Nu kan du køre xawtv (under X Window!)!\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Intet tv-kort genkendt!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Intet tv-kort blev genkendt på din maskine. Tjek venligst at et video/tv-"
-"kort der understøttes af Linux er korrekt isat.\n"
-"\n"
-"\n"
-"Du kan besøge vores database over udstyr på:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Alternative drivprogrammer"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "listen af alternative drivprogrammer for dette lydkort"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr "dette er den fysiske bus som enheden er tilsuttet (fx PCI, USB, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Bus-identifikation"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- PCI- og USB-enheder: dette viser producenten, enheden, underproducent og "
-"underenhed PCI/USB id'er"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- pci-enheder: dette giver PCI slottet, enheden og funktionen for dette "
-"kort\n"
-"- eide-enheder: enheden er enten en slave- eller mester-enhed\n"
-"- scsi-enheder: scsi-bussen og scsi enheds-id'er"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "Kapacitet for drevet"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"specielle kapaciteter for driveren (brændemulighed eller DVD-understøttelse)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "dette felt beskriver enheden"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Gammel enhedsfil"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "gammel statisk enhedsnavn brugt i dev-pakke"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Ny devfs-enhed"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "Nyt dynamisk enhedsnavn genereret af den kørende kernes devfs"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Modul"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "modulet i GNU/Linux-kernen som håndterer denne enhed"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "Udvidede partitioner"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "antal udvidede partitioner"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Geometri"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr "Cylindre/hoveder/sektorer-geometri for disken"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "Disk-kontrolkort"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr "diskkontrolleren på værtssiden"
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "Klasse af maskinenhed"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Model"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "Disk-model"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "port for netværksprinter"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "Primære partitioner"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "antal primære partitioner"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "navnet på producenten af enheden"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "Bus PCI-nummer"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "bussen som enheden er tilsuttet"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "PCI-enhede"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "PCI-enhadsnummer"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr "PCI-funktion #"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr "PCI funktionsnummer"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "Producent-ID"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr "Dette er den normale numeriske identifikator for producenten"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "Enheds-ID"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "dette er den numeriske identifikator på enheden"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr "leverandør under-ID"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr "Dette er den mindre numeriske identifikator for producenten"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr "Underenheds ID"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "dette er den mindre numeriske identifikator på enheden"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "Enhed USB ID"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"GNU/Linux-kernen skal køre en bergningsløkke ved opstaten for at "
-"initialisere en tidstæller. Dets resultat lagres som bogomips, hvilket er en "
-"måde at måle hastigheden på cpu'en."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Størrelse på cachen"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "størrelse på (andet niveau) cpu-mellemlagret"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Coma-fejl"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "om denne processor har Cyrix 6x86 Coma-fejlen eller ej"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Cpuid-familie"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "processorens familie (fx 6 for i686-klasse)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "CPUid-niveau"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "informationsniveau som kan opnås via cpuid-instruktionen"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frekvens (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"CPU-frekvensen i MHz (Megahertz, hvilket som en første tilnærmelse kan groft "
-"regnes som antal instruktioner cpu'en kan udføre per sekund)"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Flag"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flag rapporteret af kernen"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv-fejl"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"Tidlige Intel Pentium chips har en bug i deres flydendetalsprocessor, "
-"hvilket gør at de ikke kan lave den krævede precision når de udfører en "
-"flydendetalsdivision (FDIV)"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "Er FPU tilstede"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "ja betyder at processoren har en aritmetisk koprocessor"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Om FPU-en har en irq-vektor"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"ja betyder at den aritmetiske koprocessor har tilknyttet en undtagelsesvektor"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "F00f-fejl"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"tidlige pentiummer var fejlbehæftede og frøs ved afkodning af bytekoden F00F"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "Halt-fejl"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Nogen af de tidlige i486DX-100-chip kan ikke altid returnere til kørende "
-"tilstand efter 'halt'-instruktionen er brugt"
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "undergeneration af cpu'en"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "processorens generation (fx 8 for Pentium III,...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Modelnavn"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "officielt producentnavn på processoren"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "navnet på CPU'en"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "Processor-ID"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "nummeret på processoren"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Modelserie"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "serie af processoren (undermodel- (generations) nummer)"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "navnet på producenten af processoren"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Skrivebeskyttelse"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"WP-flaget i CR0-registret på cpu'en gennemtvinger skrivebeskyttelse på "
-"hukommelsessideniveauet, og derved tillade prosessoren at forhindre utjekket "
-"kerne-adgang til brugerhukommelse (dvs. dette er et værn mod fejl)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Disketteformat"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "disketteformater som drevet accepterer"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI-kanal"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr "Disk-identifikator"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr "normalt diskens serienummer"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr "Logisk enhedsnummer"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-"SCSI-målnummeret (LUN). SCSI-enheder forbundet til en vært er unikt "
-"identificeret ved et\n"
-"kanalnummer, en mål-id og et logisk enhedsnummer"
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "Installeret størrelse"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr "Installeret størrelse på hukommelsesbanken"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr "Aktiveret størrelse"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr "Aktiveret størrelse på hukommelsesbanken"
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "Typen på hukommelsesenheden"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Hastighed"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr "Hastighed på hukommelsenbanken"
-
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr "Bank-forbindelser"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr "Sokkelbetegnelse på hukommelsesbanken"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "Enhedsfil"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr "enhedsfilen brugt for at kommunikere med kernedrivere for musen"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr "Emuleret hjul"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "hjul-emulering eller ej"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "Typen på musen"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "navnet på musen"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Antal knapper"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "antal knapper som musen har"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "bustypen som musen er forbundet til"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr "Museprotokol brugt af X11"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr "protokollen som det grafiske skrivebord bruger med musen"
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Identifikation"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Forbindelse"
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr "Ydelser"
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "Fejl"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr "FPU"
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Partition"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Faciliteter"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Indstillinger"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Hjælp"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Auto-detektér printere"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Auto-detektér modemmer"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Autodetektér _jaz-drev"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr "/Automatisk fundne parallelle _zip-drev"
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr "/_Læg udstyrslisten op"
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Afslut"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Feltbeskrivelse"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake hjælp"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Når du har valgt en enhed kan du se enhedsinformationen på felter som vises "
-"i den højre ramme (\"Information\")"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Rapportér fejl"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Om..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Om Harddrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Dette er HardDrake, et %s-værktøj for konfigurering af maskinel.\n"
-"<span foreground=\"royalblue3\">Version:</span>  %s\n"
-"<span foreground=\"royalblue3\">Author: </span> Thierry Vignaud &lt; "
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "Harddrake2"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Fundet maskinel"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Konfigurér modul"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Kør konfigurationsværktøj"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "ukendt"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Ukendt"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Diverse"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Klik på en enhed i det venstre træ for at vise dets oplysninger hér."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "sekundær"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "primær"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "brænder"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr "Læg udstyrslisten op"
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Konto:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Kodeord:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Værtsnavn:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Vælg tastaturlayout."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Vil du have at Bak-tasten giver Delete i konsollen?"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Ændringen er fortaget, men for at være effektiv skal du logge ud"
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Mandriva Linux' værktøj-logger"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "Logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Vis kun for den valgte dag"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Fil/_Ny"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Fil/_Åbn"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Fil/_Gem"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Fil/Gem _som"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Fil/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Indstillinger/Test"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Hjælp/_Om..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Authentication"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "User"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "Messages"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Syslog"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "søg"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Et værktøj til at overvåge dine logfiler"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Indstillinger"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "Samstemmende"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "Men ikke samstemmende"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Vælg fil"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Kalender"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Indhold af filen"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "Post-påmindelse"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "Advarselshjælperen fejlede uventet"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vent venligst, fortolker filen: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Server"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "Løser for domænenavn"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "FTP-server"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix postserver"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Samba-server"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Webmin-tjeneste"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd-tjeneste"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "Konfigurér epostvarslingssystemet"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "Stop epostvarslingssystemet"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Konfiguration af postpåmindelse"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Velkommen til programmet for postkonfigurering.\n"
-"\n"
-"Her vil du kunne opsætte påmindelsessystemet\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Hvad vil du lave?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Opsætning af tjenester"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Du vil modtage en advarsel hvis en af de valgte tjenester ikke længere kører"
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "Indlæs opsætning"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Du vil modtage en advarsel hvis belastningen er højere end denne værdi"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Belastning"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "Advarsels-konfiguration"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Indtast din adgangskode for epost nedenfor"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-"og indtast navnet (eller IP-adressen) på smtp-serveren, du ønsker at bruge"
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "Hjælperen konfigurerede post-påminderen uden problemer."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "Hjælperen deaktiverede post-påminderen uden problemer."
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Gem som..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Vælg muse-type."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Emulering af tredje knap?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Test af musen"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Afprøv venligst din mus:"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "Netværket er oppe på grænsesnittet %s"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Netværk er nede på grænsesnit %s. Klik på 'Konfigurér netværk'"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Tilslut %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Frakobl %s"
-
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr "Overvåg netværk"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Konfigurér netværk"
-
-#: standalone/net_applet:73
-#, c-format
-msgid "Watched interface"
-msgstr "Overvåget grænseflade"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Profiler"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "Få hjælp på nettet"
-
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr "interaktiv opdagelse af indbrud"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Kør altid ved opstart"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr "Et angreb med portskanning er blevet forsøgt af %s."
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "%s-tjenesten er blevet angrebet af %s."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr "Et angreb med cracking af adgangskoder er blevet forsøgt af %s."
-
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Aktiv brandmur: indbrud opdaget"
-
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Ønsker du at sortliste angriberen?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr "Sortlist altid (spørg ikke igen)"
-
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr "Detaljer for angreb"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr "Angrebstidspunkt: %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Netværksgrænseflade: %s"
-
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr "Angrebstype: %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protokol: %s"
-
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr "IP-adresse på angriber: %s"
-
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr "Værtsnavn på angriber: %s"
-
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr "Tjeneste der blev angrebet: %s"
-
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr "Port, der blev angrebet: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr "Type på ICMP-angreb: %s"
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Overvågning af netværk"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "Overordnet statistik"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "Øjeblikkelig"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Gennemsnit"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"Sende-\n"
-"hastighed:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"Modtagelses-\n"
-"hastighed:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"Tilslutnings-\n"
-"tid: "
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr "Brug samme skala for modtaget og afsendt"
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Tester din forbindelse, vent venligst..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "Afbryder forbindelse til Internettet "
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "Kobler op til Internettet "
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Nedkobling fra Internet mislykkedes."
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Nedkobling fra Internet klar."
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Opkobling fuldført."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Tilslutning mislykkedes.\n"
-"Kontrollér konfigurationen i Mandrivas kontrolcentral."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Farve-konfiguration"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "sendt: "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "modtaget: "
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "gennemsnit"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Lokal måling"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Advarsel, en anden internetforbindelse er blevet fundet, der måske bruger "
-"dit netværk"
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "Ingen konfiguration af Internetforbindelse"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Læser data for nye printere..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "%s værktøj til administration af printere"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Handlinger"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Tilføj printer"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Set som _standard"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Redigér"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Slet"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Eksperttilstand"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Genopfrisk"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Konfigurér CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Søg:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Udfør filter"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "Def."
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Printer-navn"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Opkoblingstype"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Servernavn"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Tilføj printer"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Tilføj en ny printer til systemet"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Sæt som standard"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Sæt valgte printer som standard-printer"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Redigér valgte printer"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Slet valgte printer"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Genopfrisk listen"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "Konfigurér CUPS"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "Konfigurér CUPS-printsystemet"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Aktiveret"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Deaktiveret"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Forfattere: "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "Administration af printere %s"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"SANE-pakker skal installeres for at bruge skannere.\n"
-"\n"
-"Ønsker du at installere SANE-pakkerne?"
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Afbryder Skannerdrake."
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-"Kunne ikke installere de nødvendige pakker til at opsætte en skanner med "
-"Scannerdrake."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Scannerdrake vil ikke blive startet nu."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Søger efter konfigurerede skannere ..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Søger efter nye skannere..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "Regenererer liste af konfigurerede skannere ..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "%s understøttes ikke af denne version af %s."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s fundet på %s, skal det konfigureres automatisk?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s findes ikke skannerdatabasen, skal den konfigureres manuelt?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Vælg en skannermodel"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Fandt model: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Vært: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr " (IKKE UNDERSTØTTET)"
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "%s understøttes ikke under Linux."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "Installér ikke firmware-fil"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-"Det er muligt at din %s skal have sit firmware lagt op hver gang der tændes "
-"for den."
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "Hvis dette er tilfældet, kan du få dette lavet automatisk."
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"For at gøre dette skal du komme med firmware-filen til din skanner, så den "
-"kan blive installeret."
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"Du finder filen på den cd eller diskette som kom med skanneren, eller på "
-"fabrikantens hjemmeside, eller på din Windows-partition."
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Installér firmware-fil fra"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Vælg firmware-fil"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "Firmware-filen %s eksisterer ikke eller kan ikke læses!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-"Det er muligt at dine skannere skal have deres firmware lagt op hver gang "
-"der tændes for dem."
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-"For at gøre dette skal du komme med firmware-filerne til dine skannere, så "
-"de kan blive installeret."
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-"Hvis du allerede har installerwt din skanners firmware så kan du opdatere "
-"den her ved at angive det nye firmware-filnavn."
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "Installér firmware for"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "Vælg firmware-fil for %s"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Kunne ikke installere firmware-fil for %s!"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "Firmware-filen for din %s blev installeret uden problemer."
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "Denne %s er ikke understøttet"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"Denne %s skal være konfigureret af printerdrake.\n"
-"Du kan starte printerdrake fra %s Kontrolcenter i Udstyr-afsnittet."
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Auto-detektér tilgængelige porte"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Vælg venligst enheden hvor din %s er isat"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Bemærk: Parallelle porte kan ikke auto-detekteres)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "vælg enhed"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Søger efter skannere ..."
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "Opsætter kernemoduler..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "Bemærk!"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-"Din %s kan ikke konfigureres fuldautomatisk.\n"
-"\n"
-"Manuelle tilpasninger er nødvendige. Redigér venligst konfigurationsfilen /"
-"etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-"Mere info på driverens manualside. Kør kommandoen \"man sane-%s\" for at "
-"læse den."
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Derefter kan du skanne dokumenter med 'XSane' eller 'Kooka' fra Multimedie/"
-"grafik i programmenuen."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-"Din %s her blevet konfigureret, med det er muligt at yderligere manuelle "
-"tilpasninger er nødvendige for at få den til at virke. "
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-"Hvis den ikke kommer til syne i listen over konfigurerede skannere i "
-"Scannerdrakes hovedvindue, eller hvis den ikke virker korrekt, "
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "redigér konfigurationsfilen /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"Din %s er blevet konfigureret.\n"
-"Du kan nu skanne dokumenter med 'XSane' eller 'Kooka' fra Multimedie/grafik "
-"i programmenuen."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"De følgende skannere\n"
-"\n"
-"%s\n"
-"er tilgængelige på dit system.\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"Den følgende skanner\n"
-"\n"
-"%s\n"
-"er tilgængelig på dit system.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-"Der blev ikke fundet nogen skannere som er tilgængelige på dit system.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Søg efter nye skannere..."
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Håndpluk skanner"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Installér/opdatér firmware-filer"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Skannerdeling"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Alle eksterne maskiner"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Denne maskine"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Hær kan du vælge om skannere koblede til denne maskine skal gøres "
-"tilgængelige for eksterne maskiner og i så fald på hvilke eksterne maskiner."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Du kan også her bestemme om skannere på eksterne maskiner skal gøres "
-"tilgængelige på denne maskine"
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Skannerne på denne maskine er tilgængelige for andre maskiner"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Skannerdeling til værter: "
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Brug skannere på eksterne maskiner"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Brug skannerne på følgende værtsmaskiner:"
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Deling af lokale skannere"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-"Dette er maskinerne på hvilke de lokalt forbundne skannere skal gøres "
-"tilgængelige:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Tilføj vært"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Redigér valgte vært"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Fjern valgte vært"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Navn eller IP-adresse på vært:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Vælg værten på hvilken de lokale skannere skal gøres tilgængelige: "
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Du skal indtaste et værtsnavn eller en IP-adresse.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Denne vært er allerede på listen, og kan ikke blive tilføjet igen.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Brug skannere"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Dette er maskinerne fra hvilke skannerne skal bruges:"
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"saned skal installeres for at dele de lokale skannere.\n"
-"\n"
-"Vil du installere saned-pakken?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "Dinne skannere vil ikke være tilgængelige på netværket."
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Nogen enheder i maskinelklassen '%s' blev fjernet:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr "- %s blev fjernet\n"
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Nogen enheder blev tilføjet: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- %s blev tilføjet\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Søgning efter udstyr udføres"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr "Udstyrsændringer i \"%s\" klasse (%s sekonder til at svare)"
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Ønsker du at køre det tilsvarende konfigurationsværktøj?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Vælg sprog"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Licens"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Konfigurér mus"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Harddisk bestemmelse"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Vælg installations-metode"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Vælg tastatur"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Opdeling af disk"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Formatér partitioner"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Vælg pakker til installation"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Installér system"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "Administrator-adgangskode"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Tilføj bruger"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Konfigurér netværk"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Installér systemopstarter"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Konfigurér X"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Konfigurér tjenester"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Installér opdateringer"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Afslut installation"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Er dette korrekt?"
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "Ingen fil valgt"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Du har valgt en fil, ikke et katalog"
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Du har valgt et katalog, ikke en fil"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "Ikke noget katalog"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "Ikke nogen fil"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Udvid træ"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Sammenfold træ"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Skift mellem flad og gruppesorteret"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s er ikke installeret\n"
-"Klik \"Næste\" for at installere eller \"Fortryd\" for at afslutte"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Installation mislykkedes"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "Antal af logiske omfang: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Dit system har kun få resurser. Du kan få problemer med at installere\n"
-#~ "Mandriva Linux. Hvis dette sker, kan du prøve en tekst-baseret "
-#~ "installation i stedet\n"
-#~ "Dette gøres ved at trykke 'F1' ved opstart fra cdrommen, og så skrive "
-#~ "'text'."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Kontakter Mandriva Linux netsted for at hente listen over tilgængelige "
-#~ "spejle"
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Mandriva Linux Installation %s"
-
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "ADVARSEL: Denne enhed er tidligere blevet konfigureret til at lave "
-#~ "forbindelse til Internettet.\n"
-#~ "Ændringer i felterne nedenunder vil overskrive denne konfiguration.\n"
-#~ "Ønsker du virkelig at omkonfigurere denne enhed?"
-
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - Opret etherboot-disketter/CD'er:\n"
-#~ "        \tDe diskløse klientmaskiner behøver enten ROM-aftryksfiler på "
-#~ "netværkskortet, eller en opstartsdiskette\n"
-#~ "        \teller CD for at initiere opstartssekvensen.  drakTermServ vil "
-#~ "hjælpe til med at generere disse aftryksfiler,\n"
-#~ "        \tbaseret på netværkskortet i klientmaskinen.\n"
-#~ "        \t\t\n"
-#~ "        \tEt grundlæggende eksempel på oprettelse af en opstartsdiskette "
-#~ "for 3Com 3c509 manuelt:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Adresse-rum for dynamisk IP"
-
-#~ msgid "hd"
-#~ msgstr "disk"
-
-#~ msgid "tape"
-#~ msgstr "bånd"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "WebDAV eksternt netsted allerede synkroniseret!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "WebDAV overførsel mislykkedes!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr ""
-#~ "Kvote til sikkerhedskopiering overskredet!\n"
-#~ "%d MB brugt mod %d MB tildelt."
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Maksimal størrelse\n"
-#~ " tilladt for Drakbackup (MB)"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-Netværk via webdav.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Brug grafisk opstart"
-
-#~ msgid "first step creation"
-#~ msgstr "opretter første trin"
-
-#~ msgid "choose image file"
-#~ msgstr "vælg billedfil"
-
-#~ msgid "Browse"
-#~ msgstr "Bladr"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Konfigurér startskærmsbilled"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "farven på forløbslinjen"
-
-#~ msgid "Preview"
-#~ msgstr "smugkig"
-
-#~ msgid "Choose color"
-#~ msgstr "vælg farve"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "Skjul kernens beskeder som standard"
-
-#~ msgid "Notice"
-#~ msgstr "Bemærk"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "Dette tema har endnu ikke nogen startskærm i %s!"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Du skal vælge en biledfil først!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Genererer smugkig ..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "%s smugkig af opstartsskærm (%s)"
-
-#~ msgid ""
-#~ "The image \"%s\" cannot be load due to the following issue:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-#~ msgstr ""
-#~ "Billedet \"%s\" kan ikke indlæses pga. det følgende problem:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Intet tilgængeligt diskettedrev"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Indsæt Opdater moduler-disketten i drev %s"
-
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Tifinagh (+latinsk/arabisk)"
-
-#~ msgid "No network card"
-#~ msgstr "Intet netkort"
-
-#~ msgid "Use already installed driver (%s)"
-#~ msgstr "Brug en allerede installeret driver (%s)"
-
-#~ msgid "Use Wi-Fi Protected Access (WPA)"
-#~ msgstr "Brug Wi-Fi beskyttet adgang (WPA)"
-
-#~ msgid "You've not selected any font"
-#~ msgstr "Du har ikke valgt nogen skrifttyper."
-
-#~ msgid "Save and close"
-#~ msgstr "Gem og luk"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "Ingen netlæser til stede! Installér venligst én"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "Ingen weblæser er installeret på dit system. Installér venligst én hvis "
-#~ "du ønsker at bladre i hjælpesystemet."
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Indsæt en diskette i diskettedrevet\n"
-#~ "Alle data på disketten vil blive slettet"
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "Indsæt en tom diskette i diskette-drev %s"
-
-#~ msgid "This floppy is not FAT formatted"
-#~ msgstr "Denne diskette er ikke formatteret til FAT"
-
-#~ msgid ""
-#~ "To use this saved packages selection, boot installation with ``linux "
-#~ "defcfg=floppy''"
-#~ msgstr ""
-#~ "For at bruge dette gemte pakkevalg, start installationen op med``linux "
-#~ "defcfg=floppy''"
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Indlæs/gem på diskette"
-
-#~ msgid ""
-#~ "Please choose load or save package selection on floppy.\n"
-#~ "The format is the same as auto_install generated floppies."
-#~ msgstr ""
-#~ "Vælg indlæs eller gem pakkevalg på diskette.\n"
-#~ "Formatet er det samme som for auto_install-genererede disketter."
-
-#~ msgid "Load from floppy"
-#~ msgstr "Indlæs fra diskette"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Gem på diskette"
-
-#~ msgid "Package selection"
-#~ msgstr "Valg af pakker"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "Indlæser fra diskette"
-
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Indsæt en diskette med pakkevalget"
-
-#~ msgid "Installing HPOJ package..."
-#~ msgstr "Installerer HPOJ-pakke..."
-
-#~ msgid "Checking device and configuring HPOJ..."
-#~ msgstr "Tjekker enhed og konfigurerer HPOJ..."
-
-#~ msgid "Application:"
-#~ msgstr "Applikation:"
-
-#~ msgid "Release: "
-#~ msgstr "Udgave: "
-
-#~ msgid "Summary: "
-#~ msgstr "Oversigt: "
-
-#~ msgid "Bug Description/System Information"
-#~ msgstr "Fejlbeskrivelse/Systeminformation"
-
-#~ msgid "YOUR TEXT HERE"
-#~ msgstr "DIN TEKST HER"
-
-#~ msgid "Submit kernel version"
-#~ msgstr "Kerne-version"
-
-#~ msgid "Submit cpuinfo"
-#~ msgstr "Cpuinfo"
-
-#~ msgid "Submit lspci"
-#~ msgstr "lspci"
-
-#~ msgid "NOT FOUND"
-#~ msgstr "IKKE FUNDET"
-
-#~ msgid "connecting to %s..."
-#~ msgstr "Opkobler til %s ..."
-
-#~ msgid "Please enter a package name."
-#~ msgstr "Indtast et pakkenavn"
-
-#~ msgid "Please enter summary text."
-#~ msgstr "Indtast oversigtstekst."
-
-#~ msgid "Loading printer configuration... Please wait"
-#~ msgstr "Indlæser printerkonfiguration... Vent venligst"
-
-#~ msgid "The "
-#~ msgstr " "
-
-#~ msgid "%s (was %s)"
-#~ msgstr "%s (var %s)"
-
-#~ msgid "Root password"
-#~ msgstr "Adgangskode for root"
-
-#~ msgid "Do you want to recover your system?"
-#~ msgstr "Ønsker du at genskabe dit system?"
-
-#~ msgid "Samba server"
-#~ msgstr "Samba-server"
-
-#~ msgid "Move"
-#~ msgstr "Flyt"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "Hvilken disk ønsker du at flytte den til?"
-
-#~ msgid "Sector"
-#~ msgstr "Sektor"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "Hvilken sektor ønsker du at flytte den til?"
-
-#~ msgid "Moving"
-#~ msgstr "Flytter"
-
-#~ msgid "Moving partition..."
-#~ msgstr "Flytter partition..."
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "Fejl ved åbning af %s for skrivning: %s"
-
-#~ msgid ""
-#~ "This is HardDrake, a Mandriva Linux hardware configuration tool.\n"
-#~ "<span foreground=\"royalblue3\">Version:</span> %s\n"
-#~ "<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-#~ "tvignaud@mandriva.com&gt;\n"
-#~ "\n"
-#~ msgstr ""
-#~ "Dette er HardDrake, et Mandriva Linux-værktøj for konfigurering af "
-#~ "maskinel.\n"
-#~ "<span foreground=\"royalblue3\">Version:</span>  %s\n"
-#~ "<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-#~ "tvignaud @mandriva.com&gt;\n"
-#~ "\n"
-
-#~ msgid "Use Anonymous Bind"
-#~ msgstr "Brug anonym BIND "
-
-#~ msgid "OK"
-#~ msgstr "O.k."
-
-#~ msgid "NO"
-#~ msgstr "NEJ"
-
-#~ msgid "YES"
-#~ msgstr "JA"
-
-#~ msgid ""
-#~ "The following options can be set to customize your\n"
-#~ "system security. If you need an explanation, look at the help tooltip.\n"
-#~ msgstr ""
-#~ "De følgende tilvalg kan sættes for at tilpasse din\n"
-#~ "systemsikkerhed. Hvis du har brug for forklaringer kan du kigge på "
-#~ "Hjælpetipsene.\n"
-
-#~ msgid "The %s is not known by this version of Scannerdrake."
-#~ msgstr "%s kendes ikke af denne version af Scannerdrake."
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Tjekkisk (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Tysk"
-
-#~ msgid "Dvorak"
-#~ msgstr "Dvorak"
-
-#~ msgid "Spanish"
-#~ msgstr "Spansk"
-
-#~ msgid "Finnish"
-#~ msgstr "Finsk"
-
-#~ msgid "French"
-#~ msgstr "Fransk"
-
-#~ msgid "Norwegian"
-#~ msgstr "Norsk"
-
-#~ msgid "Polish"
-#~ msgstr "Polsk"
-
-#~ msgid "Russian"
-#~ msgstr "Russisk"
-
-#~ msgid "Swedish"
-#~ msgstr "Svensk"
-
-#~ msgid "Albanian"
-#~ msgstr "Albansk"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Armensk (gammel)"
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Armensk (skrivemaskine)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Armensk (fonetisk)"
-
-#~ msgid "Arabic"
-#~ msgstr "Arabisk"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Azerbaidiansk (latin)"
-
-#~ msgid "Belgian"
-#~ msgstr "Belgisk"
-
-#~ msgid "Bengali"
-#~ msgstr "Bengali"
-
-#~ msgid "Bulgarian (phonetic)"
-#~ msgstr "Bulgarsk (fonetisk)"
-
-#~ msgid "Bulgarian (BDS)"
-#~ msgstr "Bulgarsk (BDS)"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Brasiliansk (ABNT-2)"
-
-#~ msgid "Bosnian"
-#~ msgstr "Bosnisk"
-
-#~ msgid "Belarusian"
-#~ msgstr "Hviderussisk"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "Schweizisk (Tysk layout)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "Schweizisk (Fransk layout)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Tjekkisk (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Tysk (ingen døde taster)"
-
-#~ msgid "Devanagari"
-#~ msgstr "Devanagari"
-
-#~ msgid "Danish"
-#~ msgstr "Dansk"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Dvorak (US)"
-
-#~ msgid "Dvorak (Esperanto)"
-#~ msgstr "Dvorak (esperanto)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Dvorak (norsk)"
-
-#~ msgid "Dvorak (Swedish)"
-#~ msgstr "Dvorak (svensk)"
-
-#~ msgid "Estonian"
-#~ msgstr "Estisk"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Georgisk (russisk layout)"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Georgisk (Latin layout)"
-
-#~ msgid "Greek"
-#~ msgstr "Græsk"
-
-#~ msgid "Greek (polytonic)"
-#~ msgstr "Græsk (polytonisk)"
-
-#~ msgid "Gujarati"
-#~ msgstr "Gujarati"
-
-#~ msgid "Gurmukhi"
-#~ msgstr "Gurmukhi"
-
-#~ msgid "Hungarian"
-#~ msgstr "Ungarsk"
-
-#~ msgid "Croatian"
-#~ msgstr "Kroatisk"
-
-#~ msgid "Irish"
-#~ msgstr "Irsk"
-
-#~ msgid "Israeli"
-#~ msgstr "Israelsk"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Israelsk (Fonetisk)"
-
-#~ msgid "Iranian"
-#~ msgstr "Iransk"
-
-#~ msgid "Icelandic"
-#~ msgstr "Islandsk"
-
-#~ msgid "Italian"
-#~ msgstr "Italiensk"
-
-#~ msgid "Inuktitut"
-#~ msgstr "Inuktitut"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Japansk 106 taster"
-
-#~ msgid "Kannada"
-#~ msgstr "Kannada"
-
-#~ msgid "Korean keyboard"
-#~ msgstr "Koreansk tastatur"
-
-#~ msgid "Kyrgyz keyboard"
-#~ msgstr "Kyrgyz tastatur"
-
-#~ msgid "Latin American"
-#~ msgstr "Latinamerikansk"
-
-#~ msgid "Laotian"
-#~ msgstr "Laotisk"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Litauisk AZERTY (gammel)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Litauisk AZERTY (ny)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Litauisk \"talrække\" QWERTY"
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Litauisk \"fonetisk\" QWERTY"
-
-#~ msgid "Latvian"
-#~ msgstr "Lettisk"
-
-#~ msgid "Malayalam"
-#~ msgstr "Malayalam"
-
-#~ msgid "Macedonian"
-#~ msgstr "Makedonisk"
-
-#~ msgid "Myanmar (Burmese)"
-#~ msgstr "Myanmar (Burmesisk)"
-
-#~ msgid "Mongolian (cyrillic)"
-#~ msgstr "Mongolsk (kyrillisk)"
-
-#~ msgid "Maltese (UK)"
-#~ msgstr "Maltesisk (UK)"
-
-#~ msgid "Maltese (US)"
-#~ msgstr "Maltesisk (US)"
-
-#~ msgid "Dutch"
-#~ msgstr "Hollandsk"
-
-#~ msgid "Oriya"
-#~ msgstr "Oriya"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Polsk (polsk layout)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Polsk (polsk layout)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Portugisisk"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Canadisk (Québec)"
-
-#~ msgid "Romanian (qwertz)"
-#~ msgstr "Russisk (qwertz)"
-
-#~ msgid "Romanian (qwerty)"
-#~ msgstr "Russisk (qwerty)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Russisk (Fonetisk)"
-
-#~ msgid "Saami (norwegian)"
-#~ msgstr "Samisk (norsk)"
-
-#~ msgid "Saami (swedish/finnish)"
-#~ msgstr "Samisk (svensk/finsk)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Slovensk"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Slovakisk (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Slovakisk (QWERTY)"
-
-#~ msgid "Serbian (cyrillic)"
-#~ msgstr "Serbisk (kyrillisk)"
-
-#~ msgid "Syriac"
-#~ msgstr "Syrisk"
-
-#~ msgid "Syriac (phonetic)"
-#~ msgstr "Syrisk (fonetisk)"
-
-#~ msgid "Telugu"
-#~ msgstr "Telugu"
-
-#~ msgid "Tamil (ISCII-layout)"
-#~ msgstr "Tamil (ISCII-layout)"
-
-#~ msgid "Tamil (Typewriter-layout)"
-#~ msgstr "Tamil (skrivemaskine-layout)"
-
-#~ msgid "Thai keyboard"
-#~ msgstr "Thailandsk"
-
-#~ msgid "Tajik keyboard"
-#~ msgstr "Tajik tastatur"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Tyrkisk (traditionel \"F\" model)"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Tyrkisk (moderne \"Q\" model)"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Ukrainsk"
-
-#~ msgid "Uzbek (cyrillic)"
-#~ msgstr "Uzbek (kyrillisk)"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Vietnamesisk \"talrække\" QWERTY"
-
-#~ msgid "Yugoslavian (latin)"
-#~ msgstr "Jugoslavisk (latinsk)"
-
-#~ msgid "No devices found"
-#~ msgstr "Ingen enheder fundet"
-
-#~ msgid "Could not install necessary packages, %s cannot be started!"
-#~ msgstr "Kunne ikke installere de nødvendige pakker, %s kan ikke startes!"
-
-#~ msgid ""
-#~ "You do not have any configured Internet connection.\n"
-#~ "Please run \"Internet access\" in control center."
-#~ msgstr ""
-#~ "Du har ingen konfigureret internet-opkobling.\n"
-#~ "Kør venligst 'Internetadgang' i kontrolcentret."
-
-#~ msgid ""
-#~ "Welcome to the UPS configuration utility.\n"
-#~ "\n"
-#~ "Here, you'll be add a new UPS to your system.\n"
-#~ msgstr ""
-#~ "Velkommen til programmet for konfigurering af UPS.\n"
-#~ "\n"
-#~ "Her vil du kunne tilføje en UPS til dit system.\n"
-
-#~ msgid "Enable multiple profiles"
-#~ msgstr "Aktivér multiprofiler"
-
-#~ msgid ""
-#~ "You now have the opportunity to download updated packages. These "
-#~ "packages\n"
-#~ "have been updated after the distribution was released. They may\n"
-#~ "contain security or bug fixes.\n"
-#~ "\n"
-#~ "To download these packages, you will need to have a working Internet \n"
-#~ "connection.\n"
-#~ "\n"
-#~ "Do you want to install the updates ?"
-#~ msgstr ""
-#~ "Du har nu mulighed for at hente opdaterede pakker som er blevet "
-#~ "opdateret\n"
-#~ "efter distributionen blev gjort tilgængelig.\n"
-#~ "\n"
-#~ "Du vil få sikkerhedsrettelser eller fejlrettelser, men du skal have en\n"
-#~ "internet-opkobling for at fortsætte.\n"
-#~ "\n"
-#~ "Ønsker du at installere opdateringerne?"
-
-#~ msgid "Installing bootloader"
-#~ msgstr "Installerer systemopstarter"
-
-#~ msgid ""
-#~ "You may now provide options to module %s.\n"
-#~ "Options are in format ``name=value name2=value2...''.\n"
-#~ "For instance, ``io=0x300 irq=7''"
-#~ msgstr ""
-#~ "Du kan nu sætte parametre til modulet %s.\n"
-#~ "Parametrene er i formatet ``navn=værdi navn2=værdi2 ...''.\n"
-#~ "F.eks., ``io=0x300 irq=7''"
-
-#~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
-#~ "interface and to read back quality of link information for each of "
-#~ "those.\n"
-#~ "\n"
-#~ "This information is the same as the one available in /proc/net/wireless:\n"
-#~ "quality of the link, signal strength and noise level.\n"
-#~ "\n"
-#~ "See iwpspy(8) man page for further information."
-#~ msgstr ""
-#~ "Iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
-#~ "netværksgrænseflade\n"
-#~ "og for at læse tilbage kvalitet på en link for hver af dem.\n"
-#~ "\n"
-#~ "Denne information er den samme som den som er tilgængelig i /proc/net/"
-#~ "wireless :\n"
-#~ "kvalitet på link, signalstyrke og støjniveau.\n"
-#~ "\n"
-#~ "Se iwpspy(8) man-side for yderligere information."
-
-#~ msgid "Configuring printer..."
-#~ msgstr "Konfigurerer printer ..."
-
-#~ msgid "Configuring applications..."
-#~ msgstr "Konfigurerer programmer..."
-
-#~ msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Tilføj denne printer til Star Office/OpenOffice.org/GIMP.org"
-
-#~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Fjern denne printer fra Star Office/OpenOffice.org/GIMP.org"
-
-#~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Tilføjer printer til Star Office/OpenOffice.org/GIMP.org"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/"
-#~ "GIMP."
-#~ msgstr ""
-#~ "Printeren \"%s\" blev tilføjet til Star Office/OpenOffice.org/GIMP.org."
-
-#~ msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Kunne ikke tilføje printeren \"%s\" til Star Office/OpenOffice.org/GIMP."
-#~ "org."
-
-#~ msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Fjerner printer fra Star Office/OpenOffice.org/GIMP.org"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully removed from Star Office/OpenOffice."
-#~ "org/GIMP."
-#~ msgstr ""
-#~ "Printeren \"%s\" blev fjernet fra Star Office/OpenOffice.org/GIMP.org."
-
-#~ msgid ""
-#~ "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Kunne ikke fjerne printeren \"%s\" fra Star Office/OpenOffice.org/GIMP."
-#~ "org."
-
-#~ msgid "<b>Congratulations for choosing Mandriva Linux!</b>"
-#~ msgstr "<b>Tillykke med valget af Mandriva Linux!</b>"
-
-#~ msgid ""
-#~ "Your new Mandriva Linux operating system and its many applications is the "
-#~ "result of collaborative efforts between Mandriva developers and Mandriva "
-#~ "Linux contributors throughout the world."
-#~ msgstr ""
-#~ "Dit nye Mandriva Linux-operativsystem og dets mange programmer er "
-#~ "resultatet af samarbejde mellem Mandriva-udviklere og Mandriva Linux-"
-#~ "bidragsydere fra hele verden."
-
-#~ msgid ""
-#~ "We would like to thank everyone who participated in the development of "
-#~ "this latest release."
-#~ msgstr ""
-#~ "Vi vil takke alle som har deltaget i udviklingen af denne nyeste udgave."
-
-#~ msgid "<b>Discovery</b>"
-#~ msgstr "<b>Opdagelse</b>"
-
-#~ msgid ""
-#~ "The menu is task-oriented, with a single selected application per task."
-#~ msgstr ""
-#~ "Menuen er opgaveorienteret, med et enkelt valgt program for hver opgave."
-
-#~ msgid ""
-#~ "The powerful Open Source graphical desktop environment KDE is the desktop "
-#~ "of choice for the Discovery Pack."
-#~ msgstr ""
-#~ "Det stærke Open Source skrivebordsmiljø KDE er det valgte skrivebord for "
-#~ "Discovery-pakken."
-
-#~ msgid "<b>OpenOffice.org</b>: The complete Linux office suite."
-#~ msgstr "<b>OpenOffice.org</b>: Den komplette Linux kontorsuite."
-
-#~ msgid ""
-#~ "<b>WRITER</b> is a powerful word processor for creating all types of text "
-#~ "documents. Documents may include images, diagrams and tables."
-#~ msgstr ""
-#~ "<b>WRITER</b> er et stærkt tekstbehandlingsprogram til at lave alle slags "
-#~ "tekstdokumenter. Dokumenter kan indeholde billeder, diagrammer og "
-#~ "tabeller."
-
-#~ msgid ""
-#~ "<b>CALC</b> is a feature-packed spreadsheet which enables you to compute, "
-#~ "analyze and manage all of your data."
-#~ msgstr ""
-#~ "<b>CALC</b> er et facilitetsfyldt regneark som lader dig beregne, "
-#~ "analysere og håndtere alle dine data."
-
-#~ msgid ""
-#~ "<b>IMPRESS</b> is the fastest, most powerful way to create effective "
-#~ "multimedia presentations."
-#~ msgstr ""
-#~ "<b>IMPRESS</b> er den hurtigste og stærkeste vej til at lave effektive "
-#~ "multimediepræsentationer."
-
-#~ msgid ""
-#~ "<b>DRAW</b> will produce everything from simple diagrams to dynamic 3D "
-#~ "illustrations."
-#~ msgstr ""
-#~ "<b>DRAW</b> vil producere alt fra enkle diagrammer til dynamiske 3D-"
-#~ "illustrationer."
-
-#~ msgid "<b>Surf The Internet</b>"
-#~ msgstr "<b>Surf på Internettet</b>"
-
-#~ msgid "Discover the new integrated personal information suite KDE Kontact."
-#~ msgstr "Opdag den nye integrerede personaliainformationssuite KDE Kontact."
-
-#~ msgid ""
-#~ "More than just a full-featured email client, <b>Kontact</b> also includes "
-#~ "an address book, a calendar and scheduling program, plus a tool for "
-#~ "taking notes!"
-#~ msgstr ""
-#~ "Mer end bare en epostklient fuld af faciliteter; <b>Kontact</b> "
-#~ "inkluderer også en adressebog, kalender og planlægger, plus et værktøj "
-#~ "til at tage notater!"
-
-#~ msgid "You can also:"
-#~ msgstr "Du kan også:"
-
-#~ msgid "\t* browse the Web"
-#~ msgstr "\t* udforsk nettet"
-
-#~ msgid "\t* chat"
-#~ msgstr "\t* chat"
-
-#~ msgid "\t* organize a video-conference"
-#~ msgstr "\t* organisér en videokonference"
-
-#~ msgid "\t* create your own Web site"
-#~ msgstr "\t* lav dit eget netsted"
-
-#~ msgid "<b>Multimedia</b>: Software for every need!"
-#~ msgstr "<b>Multimedia</b>: Programmel for ethvert behov!"
-
-#~ msgid "Listen to audio CDs with <b>KsCD</b>."
-#~ msgstr "Lyt til musik-cd'er med <b>KsCD</b>."
-
-#~ msgid "Listen to music files and watch videos with <b>Totem</b>."
-#~ msgstr "Lyt til musikfiler og se videoer med <b>Totem</b>."
-
-#~ msgid ""
-#~ "View and edit images and photos with <b>GQview</b> and <b>The Gimp!</b>"
-#~ msgstr ""
-#~ "Vís og redigér billeder og fotografier med <b>GQview</b> og <b>Gimp</b>!"
-
-#~ msgid "Become a <b>Mandriva Club</b> member!"
-#~ msgstr "Bliv medlem af <b>Mandriva Club</b>!"
-
-#~ msgid ""
-#~ "Take advantage of valuable benefits, products and services by joining "
-#~ "Mandriva Club, such as:"
-#~ msgstr ""
-#~ "Drag nytte af værdifulde fordele, produkter og tjenester ved at være med "
-#~ "i Mandriva Club, med:"
-
-#~ msgid "\t* Full access to commercial applications"
-#~ msgstr "\t* Fuld adgang til kommercielle programmer"
-
-#~ msgid ""
-#~ "\t* Special download mirror list exclusively for Mandriva Club Members"
-#~ msgstr ""
-#~ "\t* Speciel liste over filhentningsspejle, udelukkende for Mandriva Club-"
-#~ "medlemmer"
-
-#~ msgid "\t* Voting for software to put in Mandriva Linux"
-#~ msgstr "\t* Stem på programmel som skal være med i Mandriva Linux"
-
-#~ msgid "\t* Plus much more"
-#~ msgstr "\t* Plus meget mere"
-
-#~ msgid "For more information, please visit <b>www.mandrakeclub.com</b>"
-#~ msgstr ""
-#~ "For mere information kan du kigge forbi på <b>www.mandrakeclub.com</b>"
-
-#~ msgid "Do you require assistance?"
-#~ msgstr "Har du brug for hjælp?"
-
-#~ msgid "<b>Mandriva Expert</b> is the primary source for technical support."
-#~ msgstr "<b>Mandriva Expert</b> er den bedste kilde til teknisk hjælp."
-
-#~ msgid ""
-#~ "If you have Linux questions, subscribe to Mandriva Expert at <b>www."
-#~ "mandrivaexpert.com</b>"
-#~ msgstr ""
-#~ "Hvis du har Linux-spørgsmål, så abonnér på Mandriva Expert hos <b>www."
-#~ "mandrivaexpert.com</b>"
-
-#~ msgid ""
-#~ "If you would like to get involved, please subscribe to the \"Cooker\" "
-#~ "mailing list by visiting <b>mandrake-linux.com/cooker</b>"
-#~ msgstr ""
-#~ "Hvis du ønsker at være involveret, så abonnér da venligst på \"Cooker\"- "
-#~ "mailinglisten ved at besøge <b>mandrake-linux.com/cooker</b>"
-
-#~ msgid ""
-#~ "To learn more about our dynamic community, please visit <b>www.mandrake-"
-#~ "linux.com</b>!"
-#~ msgstr ""
-#~ "For at lære mere om vores dynamiske fællesskab kan du kigge forbi på "
-#~ "<b>www.mandrake-linux.com</b>!"
-
-#~ msgid ""
-#~ "Mandriva Linux includes the famous graphical desktops KDE and GNOME, plus "
-#~ "the latest versions of the most popular Open Source applications."
-#~ msgstr ""
-#~ "Mandriva Linux indeholder de berømte grafiske skriveborde KDE og GNOME, "
-#~ "plus den nyeste version af de mest populære Frit Programmel-applikationer."
-
-#~ msgid ""
-#~ "Mandriva Linux is widely known as the most user-friendly and the easiest "
-#~ "to install and easy to use Linux distribution."
-#~ msgstr ""
-#~ "Mandriva Linux er videnom kendt for at være den mest brugervenlige, "
-#~ "nemmeste at installere og letteste at bruge Linux-distribution, som "
-#~ "findes."
-
-#~ msgid ""
-#~ "\t* Find out Mandriva Linux on a bootable CD with <b>Mandrakemove</b>"
-#~ msgstr ""
-#~ "\t* Find ud af mere om vor Mandriva Linux på en opstartelig CD med "
-#~ "Mandrakemove"
-
-#~ msgid ""
-#~ "\t* If you use Linux mostly for Office, Internet and Multimedia tasks, "
-#~ "<b>Discovery</b> perfectly meets your needs"
-#~ msgstr ""
-#~ "\t* Hvis du bruger Linux mest til Kontoret, Internet og "
-#~ "Multimedieopgaver, så passer <b>Discovery</b> perfekt til dine behov"
-
-#~ msgid ""
-#~ "\t* If you appreciate the largest selection of software including "
-#~ "powerful development tools, <b>PowerPack</b> is for you"
-#~ msgstr ""
-#~ "\t* Hvis du sætter pris på det største udvalg af progammel inklusive "
-#~ "stærke udviklingsværktøjer, så er <b>PowerPack</b> noget for dig"
-
-#~ msgid ""
-#~ "\t* If you require a full-featured Linux solution customized for small to "
-#~ "medium-sized networks, choose <b>PowerPack+</b>"
-#~ msgstr ""
-#~ "\t* Hvis du behøver en Linux-løsning fuld af faciliteter skræddersyet for "
-#~ "små til mellemstore netværk, så vælg <b>PowerPack+</b>"
-
-#~ msgid "Find out also our <b>Business Solutions</b>!"
-#~ msgstr "Find også ud af informationer om vore <b>Erhvervsløsninger</b>!"
-
-#~ msgid ""
-#~ "<b>Corporate Server</b>: the ideal solution for entreprises. It is a "
-#~ "complete \"all-in-one\" solution that includes everything needed to "
-#~ "rapidly deploy world-class Linux server applications."
-#~ msgstr ""
-#~ "<b>Corporate Server</b>: den idéelle løsning for større firmaer. Det er "
-#~ "en komplet \"alt-i-en\"-løsning som inkluderer alt som behøves for at "
-#~ "hurtigt udrulle Linux-serverapplikationer i verdensklasse."
-
-#~ msgid ""
-#~ "<b>Multi Network Firewall</b>: based on Linux 2.4 \"kernel secure\" to "
-#~ "provide multi-VPN as well as multi-DMZ functionalities. It is the perfect "
-#~ "high performance security solution."
-#~ msgstr ""
-#~ "<b>Multi Network Firewall</b>: baseret på Linux 2.4 \"kernel secure\" for "
-#~ "at give multi-VPN- så vel som multi-DMZ-funktionaliteter. Det er den "
-#~ "perfekte højydelses sikkerhedsløsning."
-
-#~ msgid ""
-#~ "<b>MandrakeClustering</b>: the power and speed of a Linux cluster "
-#~ "combined with the stability and easy-of-use of the world-famous Mandriva "
-#~ "Linux distribution. A unique blend for incomparable HPC performance."
-#~ msgstr ""
-#~ "<b>MandrakeClustering</b>: styrken og hastigheden af en Linux-klynge "
-#~ "kombineret med stabiliteten og brugervenligheden af den verdensberømte "
-#~ "Mandriva Linux-distribution. En unik sammensætning for enestående HPC-"
-#~ "ydelse."
-
-#~ msgid ""
-#~ "Find out also support incidents if you have any problems, from standard "
-#~ "to professional support, from 1 to 50 incidents, take the one which meets "
-#~ "perfectly your needs!"
-#~ msgstr ""
-#~ "Få også information om køb af kundestøttepakker, hvis du har nogen "
-#~ "problemer, fra standard til professionel kundestøtte, pakker fra 1 til 50 "
-#~ "tilfælder, vælg den som møder dine behov bedst!"
-
-#~ msgid "<b>Become a Mandriva Club member!</b>"
-#~ msgstr "<b>Bliv medlem af Mandriva Club!</b>"
-
-#~ msgid "<b>Do you require assistance?</b>"
-#~ msgstr "<b>Har du brug for hjælp?</b>"
-
-#~ msgid "This is the Mandriva Linux <b>Download version</b>."
-#~ msgstr "Dette er Mandriva Linux <b>Download Edition</b>."
-
-#~ msgid ""
-#~ "The free download version does not include commercial software, and "
-#~ "therefore may not work with certain modems (such as some ADSL and RTC) "
-#~ "and video cards (such as ATI® and NVIDIA®)."
-#~ msgstr ""
-#~ "Den gratis netversion inkluderer ikke kommercielt programmel, og vil "
-#~ "dermed muligvis ikke fungere med enkelte modemmer (såsom nogen ADSL og "
-#~ "RTC) og skærmkort (såsom ATI® og NVIDIA®)."
-
-#~ msgid ""
-#~ "Your new Mandriva Linux distribution and its many applications are the "
-#~ "result of collaborative efforts between Mandriva developers and Mandriva "
-#~ "Linux contributors throughout the world."
-#~ msgstr ""
-#~ "Din nye Mandriva Linux-distribution og dets mange programmer er "
-#~ "resultatet af samarbejde mellem Mandriva-udviklere og Mandriva Linux-"
-#~ "bidragsydere rundtom i hele verden."
-
-#~ msgid "<b>PowerPack+</b>"
-#~ msgstr "<b>PowerPack+</b>"
-
-#~ msgid ""
-#~ "PowerPack+ is a full-featured Linux solution for small to medium-sized "
-#~ "networks. PowerPack+ increases the value of the standard PowerPack by "
-#~ "adding a comprehensive selection of world-class server applications."
-#~ msgstr ""
-#~ "PowerPack+ er en facilitetsfyldt Linux-løsning for små til mellemstore "
-#~ "netværk. Powerpack+ øger værdien af den normale PowerPack ved at tilføje "
-#~ "et stort udvalg af serverapplikationer i verdensklasse."
-
-#~ msgid ""
-#~ "It is the only Mandriva Linux product that includes the groupware "
-#~ "solution."
-#~ msgstr ""
-#~ "Det er den eneste Mandriva Linux-produkt som inkluderer "
-#~ "gruppevareløsningen."
-
-#~ msgid ""
-#~ "When you log into your Mandriva Linux system for the first time, you can "
-#~ "choose between several popular graphical desktops environments, "
-#~ "including: KDE, GNOME, WindowMaker, IceWM, and others."
-#~ msgstr ""
-#~ "Når du logger ind på dit Mandriva Linux-system for første gang, så kan du "
-#~ "vælge mellem en række populære grafiske skrivebordsmiljøer, inklusive "
-#~ "KDE, GNOME, WindowMaker, IceWM og andre."
-
-#~ msgid ""
-#~ "In the Mandriva Linux menu you will find easy-to-use applications for all "
-#~ "of your tasks:"
-#~ msgstr ""
-#~ "I Mandriva Linux-menuen vil du finde applikationer som er nemme at bruge "
-#~ "til alle dine opgaver:"
-
-#~ msgid ""
-#~ "\t* Listen to audio CDs and music files with <b>KsCD</b> and <b>Totem</b>"
-#~ msgstr "\t* Lyt til audioCDer og musik med <b>KsCD</b> og <b>Totem</b>"
-
-#~ msgid ""
-#~ "PowerPack+ includes everything needed for developing and creating your "
-#~ "own software, including:"
-#~ msgstr ""
-#~ "PowerPack+ indeholder alt som behøves til udvikiling og til at lave dit "
-#~ "eget programmel, inklusive:"
-
-#~ msgid ""
-#~ "\t* <b>Kdevelop</b>: a full featured, easy to use Integrated Development "
-#~ "Environment for C++ programming"
-#~ msgstr ""
-#~ "\t* <b>Kdevelop</b>: et omfattende, brugervenligt, integreret "
-#~ "udviklingsmiljø til C++-programmering"
-
-#~ msgid "\t* <b>GCC</b>: the GNU Compiler Collection"
-#~ msgstr "\t* <b>GCC</b>: GCC-oversættersamlingen"
-
-#~ msgid "\t* <b>GDB</b>: the GNU Project debugger"
-#~ msgstr "\t* <b>GDB</b>: GNU projektets fejlsøger"
-
-#~ msgid "<b>Discover the full-featured groupware solution!</b>"
-#~ msgstr "<b>Opdag den omfattende gruppevareløsning!</b>"
-
-#~ msgid "It includes both server and client features for:"
-#~ msgstr "Den inkluderer både server- og klientfaciliteter for:"
-
-#~ msgid ""
-#~ "\t* Calendar, Task List, Memos, Contacts, Meeting Request (sending and "
-#~ "receiving), Task Requests (sending and receiving)"
-#~ msgstr ""
-#~ "\t* Kalender, Opgaveliste, Påmindelser, Kontakter, Mødeforespørgsler "
-#~ "(sending og modtagelse), Opgaveforespørgsler (sending og modtagelse)"
-
-#~ msgid "\t* Address Book (server and client)"
-#~ msgstr "\t* Addressebog (server og klient)"
-
-#~ msgid ""
-#~ "Your new Mandriva Linux distribution is the result of collaborative "
-#~ "efforts between Mandriva developers and Mandriva Linux contributors "
-#~ "throughout the world."
-#~ msgstr ""
-#~ "Din nye Mandriva Linux-distribution er et resultat af samarbejde mellem "
-#~ "Mandriva-udviklere og Mandriva Linux-bidragsydere rundt omkring i hele "
-#~ "verden."
-
-#~ msgid ""
-#~ "We would like to thank everyone who participated in the development of "
-#~ "our latest release."
-#~ msgstr "Vi vil takke alle som deltog i udviklingen af vores nyeste udgave."
-
-#~ msgid "<b>PowerPack</b>"
-#~ msgstr "<b>PowerPack</b>"
-
-#~ msgid ""
-#~ "PowerPack includes everything needed for developing and creating your own "
-#~ "software, including:"
-#~ msgstr ""
-#~ "PowerPack indeholder alt som behøves til udvikiling og til at lave dit "
-#~ "eget programmel, inklusive:"
-
-#~ msgid "And of course the editors!"
-#~ msgstr "Og selvfølgelig tekstprogrammene!"
-
-#~ msgid "Installation of %s failed. The following error occurred:"
-#~ msgstr "Installationen af %s mislykkedes. Følgende fejl opstod:"
-
-#~ msgid ""
-#~ "We need to install ntp package\n"
-#~ " to enable Network Time Protocol\n"
-#~ "\n"
-#~ "Do you want to install ntp ?"
-#~ msgstr ""
-#~ "Vi behøver installere ntp-pakken\n"
-#~ " for at aktivere Network Time Protocol\n"
-#~ "\n"
-#~ "Ønsker du at installere ntp?"
-
-#~ msgid ""
-#~ "The setup of a VPN connection has already been done.\n"
-#~ "\n"
-#~ "It's currently enabled.\n"
-#~ "\n"
-#~ "What would you like to do ?"
-#~ msgstr ""
-#~ "Indstillingen af en VPN-forbindelse er allerede gjort.\n"
-#~ "\n"
-#~ "Det er aktiveret nu.\n"
-#~ "\n"
-#~ "Hvad ønsker du at gøre?"
-
-#~ msgid ""
-#~ "The setup of a VPN connection has already been done.\n"
-#~ "\n"
-#~ "It's currently disabled.\n"
-#~ "\n"
-#~ "What would you like to do ?"
-#~ msgstr ""
-#~ "Opsætningen for en VPN-opkobling er allerede blevet gjort.\n"
-#~ "\n"
-#~ "Dette er for øjeblikket deaktiveret.\n"
-#~ "\n"
-#~ "Hvad vil du gøre?"
-
-#~ msgid "Set of tools to read and send mail and news and to browse the Web"
-#~ msgstr ""
-#~ "Værktøjssæt til at læse samt sende post og nyheder, og til at browse på "
-#~ "nettet"
-
-#~ msgid ""
-#~ "Before continuing, you should carefully read the terms of the license. "
-#~ "It\n"
-#~ "covers the entire Mandriva Linux distribution. If you do agree with all "
-#~ "the\n"
-#~ "terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n"
-#~ "will reboot your computer."
-#~ msgstr ""
-#~ "Før du går videre bør du læse betingelserne i licensen omhyggeligt.  Den "
-#~ "omfatter hele Mandriva Linux distributionen. Hvis du er enig i alle "
-#~ "betingelserne i den, så klik på '%s'-boksen. Hvis ikke, så vil klikning "
-#~ "på \"%s\"-knappen genstarte din maskine."
-
-#~ msgid ""
-#~ "GNU/Linux is a multi-user system, meaning each user may have their own\n"
-#~ "preferences, their own files and so on. You can read the ``Starter "
-#~ "Guide''\n"
-#~ "to learn more about multi-user systems. But unlike \"root\", who is the\n"
-#~ "system administrator, the users you add at this point will not be\n"
-#~ "authorized to change anything except their own files and their own\n"
-#~ "configurations, protecting the system from unintentional or malicious\n"
-#~ "changes that impact on the system as a whole. You will have to create at\n"
-#~ "least one regular user for yourself -- this is the account which you "
-#~ "should\n"
-#~ "use for routine, day-to-day use. Although it is very easy to log in as\n"
-#~ "\"root\" to do anything and everything, it may also be very dangerous! A\n"
-#~ "very simple mistake could mean that your system will not work any more. "
-#~ "If\n"
-#~ "you make a serious mistake as a regular user, the worst that will happen "
-#~ "is\n"
-#~ "that you will lose some information, but not affect the entire system.\n"
-#~ "\n"
-#~ "The first field asks you for a real name. Of course, this is not "
-#~ "mandatory\n"
-#~ "-- you can actually enter whatever you like. DrakX will use the first "
-#~ "word\n"
-#~ "you typed in this field and copy it to the \"%s\" field, which is the "
-#~ "name\n"
-#~ "this user will enter to log onto the system. If you like, you may "
-#~ "override\n"
-#~ "the default and change the user name. The next step is to enter a "
-#~ "password.\n"
-#~ "From a security point of view, a non-privileged (regular) user password "
-#~ "is\n"
-#~ "not as crucial as the \"root\" password, but that is no reason to "
-#~ "neglect\n"
-#~ "it by making it blank or too simple: after all, your files could be the\n"
-#~ "ones at risk.\n"
-#~ "\n"
-#~ "Once you click on \"%s\", you can add other users. Add a user for each "
-#~ "one\n"
-#~ "of your friends: your father or your sister, for example. Click \"%s\" "
-#~ "when\n"
-#~ "you have finished adding users.\n"
-#~ "\n"
-#~ "Clicking the \"%s\" button allows you to change the default \"shell\" "
-#~ "for\n"
-#~ "that user (bash by default).\n"
-#~ "\n"
-#~ "When you have finished adding users, you will be asked to choose a user "
-#~ "who\n"
-#~ "can automatically log into the system when the computer boots up. If you\n"
-#~ "are interested in that feature (and do not care much about local "
-#~ "security),\n"
-#~ "choose the desired user and window manager, then click \"%s\". If you "
-#~ "are\n"
-#~ "not interested in this feature, uncheck the \"%s\" box."
-#~ msgstr ""
-#~ "GNU/Linux er et flerbrugersystem, det vil sige at hver bruger kan have "
-#~ "sine egne præferencer, sine egne filer og så videre. Du kan læse "
-#~ "startvejledningen for at lære mere om flerbrugersystemer.\n"
-#~ "Men i modsætning til 'root', som er systemadministratoren, vil brugerne "
-#~ "som du tilføjer her ikke have lov til at ændre nogetsomhelst, undtagen "
-#~ "deres egne filer og deres egne opsætninger, hvilket beskytter systemet "
-#~ "mod utilsigtede eller ondartede ændringer som påvirker hele systemet. Du "
-#~ "skal oprette i det mindste én almindelig bruger til dig selv - dette er "
-#~ "den konto som du bør bruge til almindelig dagligt brug. Selvom det er "
-#~ "meget nemt at logge ind som root for at gøre alt, kan det også være meget "
-#~ "farligt!\n"
-#~ "En meget simpel fejltagelse kan betyde at dit system ikke virker mere. "
-#~ "Hvis du laver en alvorlig fejltagelse som almindelig bruger, vil det "
-#~ "værste der kan ske at du vil tabe nogen information, men det vil ikke "
-#~ "påvirke hele systemet.\n"
-#~ "\n"
-#~ "Det første felt spørger efter dit rigtige navn. Dette er naturligvis ikke "
-#~ "krævet -du kan faktisk skrive hvad du lyster. DrakX vil bruge det første "
-#~ "ord du indtastede i feltet og kopiere det til '%s'-feltet, hvilket er "
-#~ "navnet, som denne bruger skal indtaste for at logge ind på systemet. Hvis "
-#~ "du ønsker det kan du tilsidesætte det forvalgte og ændre brugernavnet. "
-#~ "Det næste trin er at indtaste en adgangskode. Fra et sikkerhedsmæssigt "
-#~ "synspunkt er adgangskoden for en ikke-priviligeret (normal) bruger er "
-#~ "ikke så afgørende som 'Root'-adgangskoden, men det er ingen grund til at "
-#~ "negligere det alligevel, ved at lade det være blankt eller at gøre det "
-#~ "for nemt - når det kommer til stykket er det dine egne filer, der er i "
-#~ "fare.\n"
-#~ "\n"
-#~ "Når du har klikket på '%s', kan du tilføje andre brugere. Tilføj en "
-#~ "bruger for hver af dine venner, din far eller din søster. Når du har "
-#~ "tilføjet alle de brugere du ønsker, klik da på '%s'.\n"
-#~ "\n"
-#~ "Klik på '%s'-knappen lader dig ændre standard-'skál' for denne bruger\n"
-#~ "(bash er standard). \n"
-#~ "\n"
-#~ "Når du er færdig med at tilføje brugere, vil du blive spurgt om at vælge "
-#~ "en bruger som automatisk kan logge ind på systemet når maskinen startes "
-#~ "op. Hvis du er interesseret i denne facilitet (og ikke kærer dig "
-#~ "synderligt om lokal sikkerhed), så vælg den ønskede bruger og "
-#~ "vindueshåndtering og klik '%s'. Hvis du ikke er interesseret i denne "
-#~ "facilitet, så afmarkér boksen med '%s'."
-
-#~ msgid ""
-#~ "The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-#~ "selected package is located on another CD-ROM, DrakX will eject the "
-#~ "current\n"
-#~ "CD and ask you to insert the correct CD as required."
-#~ msgstr ""
-#~ "Mandriva Linux installationen bliver distribueret på flere cdrom-er. Hvis "
-#~ "en valgt pakke ligger på en anden cdrom, vil DrakX udskyde den nuværende "
-#~ "cd og bede dig om at isætte den rigtige CD, om nødvendigt."
-
-#~ msgid ""
-#~ "It is now time to specify which programs you wish to install on your\n"
-#~ "system. There are thousands of packages available for Mandriva Linux, "
-#~ "and\n"
-#~ "to make it simpler to manage the packages have been placed into groups "
-#~ "of\n"
-#~ "similar applications.\n"
-#~ "\n"
-#~ "Packages are sorted into groups corresponding to a particular use of "
-#~ "your\n"
-#~ "machine. Mandriva Linux sorts packages groups in four categories. You "
-#~ "can\n"
-#~ "mix and match applications from the various categories, so a\n"
-#~ "``Workstation'' installation can still have applications from the\n"
-#~ "``Development'' category installed.\n"
-#~ "\n"
-#~ " * \"%s\": if you plan to use your machine as a workstation, select one "
-#~ "or\n"
-#~ "more of the groups that are in the workstation category.\n"
-#~ "\n"
-#~ " * \"%s\": if you plan on using your machine for programming, select the\n"
-#~ "appropriate groups from that category.\n"
-#~ "\n"
-#~ " * \"%s\": if your machine is intended to be a server, select which of "
-#~ "the\n"
-#~ "more common services you wish to install on your machine.\n"
-#~ "\n"
-#~ " * \"%s\": this is where you will choose your preferred graphical\n"
-#~ "environment. At least one must be selected if you want to have a "
-#~ "graphical\n"
-#~ "interface available.\n"
-#~ "\n"
-#~ "Moving the mouse cursor over a group name will display a short "
-#~ "explanatory\n"
-#~ "text about that group. If you unselect all groups when performing a "
-#~ "regular\n"
-#~ "installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-#~ "different options for a minimal installation:\n"
-#~ "\n"
-#~ " * \"%s\": install the minimum number of packages possible to have a\n"
-#~ "working graphical desktop.\n"
-#~ "\n"
-#~ " * \"%s\": installs the base system plus basic utilities and their\n"
-#~ "documentation. This installation is suitable for setting up a server.\n"
-#~ "\n"
-#~ " * \"%s\": will install the absolute minimum number of packages "
-#~ "necessary\n"
-#~ "to get a working Linux system. With this installation you will only have "
-#~ "a\n"
-#~ "command line interface. The total size of this installation is about 65\n"
-#~ "megabytes.\n"
-#~ "\n"
-#~ "You can check the \"%s\" box, which is useful if you are familiar with "
-#~ "the\n"
-#~ "packages being offered or if you want to have total control over what "
-#~ "will\n"
-#~ "be installed.\n"
-#~ "\n"
-#~ "If you started the installation in \"%s\" mode, you can unselect all "
-#~ "groups\n"
-#~ "to avoid installing any new package. This is useful for repairing or\n"
-#~ "updating an existing system."
-#~ msgstr ""
-#~ "Det er nu tid til at angive hvilke pakker du vil installere på dit "
-#~ "system. Der er tusindvis af pakker til dit Mandriva Linux system, og for "
-#~ "at gøre det nemmere at håndtere dem er pakker blevet placeret i grupper "
-#~ "af lignende programmer.\n"
-#~ "\n"
-#~ "Pakkerne er ordnet i grupper svarende til en bestemt anvendelse af din "
-#~ "maskine. Mandriva Linux opdeler pakkegrupper i fire kategorier. Du kan "
-#~ "vælge og vrage programmer fra de forskellige grupper, så en installation "
-#~ "af 'Arbejdsstation' kan også have programmer fra 'Udvikling'-kategorien "
-#~ "installeret.\n"
-#~ "\n"
-#~ " * '%s': Hvis din maskine skal bruges som en arbejdsstation, vælg da en "
-#~ "eller flere af programmerne der er i arbejdsstationskategorien.\n"
-#~ "\n"
-#~ " * '%s': hvis du vil bruge maskinen til programmering vælg da de "
-#~ "relevante pakker fra denne kategori.\n"
-#~ "\n"
-#~ " * '%s': hvis det er planen at maskinen skal være en server, så vælg de "
-#~ "mere almindelige tjenester, som du ønsker at installere på maskinen.\n"
-#~ "\n"
-#~ " * '%s': her skal du vælge foretrukne grafiske miljø. Vælg mindst ét, "
-#~ "hvis du ønsker at have en grafisk grænseflade tilgængelig.\n"
-#~ "\n"
-#~ "Ved flytning af musen over et gruppenavn vises en kort forklarende tekst "
-#~ "om denne gruppe. Hvis du fravælger alle grupper ved udførelse af en "
-#~ "almindelig installation (i  modsætning til en opgradering), vil en dialog "
-#~ "komme frem som foreslår dig  forskellige former for minimal "
-#~ "installation: \n"
-#~ "\n"
-#~ " * '%s' installerer de færrest mulige antal pakker for at få en "
-#~ "fungerende grafisk arbejdsstation.\n"
-#~ "\n"
-#~ " * '%s' installerer det basale system plus basale nytteprogrammer og "
-#~ "tilhørende dokumentation. Denne installation er passende til at sætte en "
-#~ "server op.\n"
-#~ "\n"
-#~ " * '%s' vil installere det absolut mindst mulige antal pakker nødvendigt "
-#~ "for at få et virkende Linux-system. Med denne installation fås kun en "
-#~ "grænseflade med kommandolinjer. Den totale størrelse af denne "
-#~ "installation er omkring 65 megabyte.\n"
-#~ "\n"
-#~ "Du kan afkrydse boksen '%s', hvilket er nyttigt, hvis du kender de "
-#~ "tilbudte pakker godt, eller hvis du ønsker at have fuld kontrol over hvad "
-#~ "der skal installeres.\n"
-#~ "\n"
-#~ "Hvis du har startet installationen i '%s'-tilstand, kan du fravælge alle "
-#~ "grupper for at undgå at installere nogen nye pakker. Dette er nyttigt ved "
-#~ "reparation eller opdatering af et eksisterende system."
-
-#~ msgid ""
-#~ "If you told the installer that you wanted to individually select "
-#~ "packages,\n"
-#~ "it will present a tree containing all packages classified by groups and\n"
-#~ "subgroups. While browsing the tree, you can select entire groups,\n"
-#~ "subgroups, or individual packages.\n"
-#~ "\n"
-#~ "Whenever you select a package on the tree, a description appears on the\n"
-#~ "right to let you know the purpose of the package.\n"
-#~ "\n"
-#~ "!! If a server package has been selected, either because you "
-#~ "specifically\n"
-#~ "chose the individual package or because it was part of a group of "
-#~ "packages,\n"
-#~ "you will be asked to confirm that you really want those servers to be\n"
-#~ "installed. By default Mandriva Linux will automatically start any "
-#~ "installed\n"
-#~ "services at boot time. Even if they are safe and have no known issues at\n"
-#~ "the time the distribution was shipped, it is entirely possible that that\n"
-#~ "security holes were discovered after this version of Mandriva Linux was\n"
-#~ "finalized. If you do not know what a particular service is supposed to "
-#~ "do\n"
-#~ "or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
-#~ "install the listed services and they will be started automatically by\n"
-#~ "default during boot. !!\n"
-#~ "\n"
-#~ "The \"%s\" option is used to disable the warning dialog which appears\n"
-#~ "whenever the installer automatically selects a package to resolve a\n"
-#~ "dependency issue. Some packages have relationships between each them "
-#~ "such\n"
-#~ "that installation of one package requires that some other program is "
-#~ "also\n"
-#~ "required to be installed. The installer can determine which packages are\n"
-#~ "required to satisfy a dependency to successfully complete the "
-#~ "installation.\n"
-#~ "\n"
-#~ "The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-#~ "package list created during a previous installation. This is useful if "
-#~ "you\n"
-#~ "have a number of machines that you wish to configure identically. "
-#~ "Clicking\n"
-#~ "on this icon will ask you to insert a floppy disk previously created at "
-#~ "the\n"
-#~ "end of another installation. See the second tip of last step on how to\n"
-#~ "create such a floppy."
-#~ msgstr ""
-#~ "Hvis du fortalte installeringen at du ønskede at vælge individuelle "
-#~ "pakker, vil den vise et træ med alle pakker opdelt i grupper og "
-#~ "undergrupper. Under gennembladring af træet kan du udvælge hele grupper, "
-#~ "undergrupper eller individuelle pakker.\n"
-#~ "\n"
-#~ "Hver gang du udvælger en pakke i træet vil en beskrivelse fremkomme til "
-#~ "højre for at lade dig vide formålet med pakken. \n"
-#~ "\n"
-#~ "!! Når en server-pakke er blevet valgt, enten fordi du specielt valgte "
-#~ "den individuelle pakke, eller fordi den var en del af en gruppe af "
-#~ "pakker, vil du blive spurgt om at bekræfte at du virkelig ønsker at "
-#~ "installere disse servere. Som standard under Mandriva Linux bliver "
-#~ "installerede servere startet op ved opstart af maskinen. Selvom de er "
-#~ "sikre og ikke har nogen kendte problemer på udgivelsestidspunktet for "
-#~ "distributionen, er det absolut muligt at sikkerhedshuller blev opdaget "
-#~ "efter at denne version af Mandriva Linux blev færdiggjort. Hvis du ikke "
-#~ "véd hvad en bestemt tjeneste vil gøre eller hvorfor den skal installeres, "
-#~ "så klik '%s' her. Et klik med '%s' her vil installere de nævnte servere "
-#~ "og de vil som standard blive startet automatisk under opstarten!!\n"
-#~ "\n"
-#~ "'%s'-valget deaktiverer advarselsdialogen, som vises hver gang "
-#~ "installeringsprogrammet automatisk vælger en pakke for at løse et "
-#~ "afhængighedsproblem. Nogen pakker har relationer mellem hinanden så "
-#~ "installation af en pakke kræver at nogen andre programmer skal være "
-#~ "installeret. Installationsprogrammet kan beregne hvilke pakker der er "
-#~ "krævet for at tilfredsstille en afhængighed for at kunne færdiggøre en "
-#~ "installation problemfrit.\n"
-#~ "\n"
-#~ "Den klejne disketteikon i bunden af listen muliggør indlæsning af en "
-#~ "pakkeliste oprettet ved en tidligere installation. Dette er nyttigt hvis "
-#~ "du har et antal maskiner som du ønsker at konfigurere på samme måde. Klik "
-#~ "på denne ikon vil bede dig om at indsætte en diskette tidligere lavet i "
-#~ "slutningen på en anden installation. Se råd nr to i det sidste trin for "
-#~ "hvordan en sådan diskette kan laves."
-
-#~ msgid ""
-#~ "You will now set up your Internet/network connection. If you wish to\n"
-#~ "connect your computer to the Internet or to a local network, click \"%s"
-#~ "\".\n"
-#~ "Mandriva Linux will attempt to auto-detect network devices and modems. "
-#~ "If\n"
-#~ "this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
-#~ "configure the network, or to do it later, in which case clicking the \"%s"
-#~ "\"\n"
-#~ "button will take you to the next step.\n"
-#~ "\n"
-#~ "When configuring your network, the available connections options are:\n"
-#~ "Normal modem connection, Winmodem connection, ISDN modem, ADSL "
-#~ "connection,\n"
-#~ "cable modem, and finally a simple LAN connection (Ethernet).\n"
-#~ "\n"
-#~ "We will not detail each configuration option - just make sure that you "
-#~ "have\n"
-#~ "all the parameters, such as IP address, default gateway, DNS servers, "
-#~ "etc.\n"
-#~ "from your Internet Service Provider or system administrator.\n"
-#~ "\n"
-#~ "About Winmodem Connection. Winmodems are special integrated low-end "
-#~ "modems\n"
-#~ "that require additional software to work compared to Normal modems. Some "
-#~ "of\n"
-#~ "those modems actually work under Mandriva Linux, some others do not. You\n"
-#~ "can consult the list of supported modems at LinModems.\n"
-#~ "\n"
-#~ "You can consult the ``Starter Guide'' chapter about Internet connections\n"
-#~ "for details about the configuration, or simply wait until your system is\n"
-#~ "installed and use the program described there to configure your "
-#~ "connection."
-#~ msgstr ""
-#~ "Du vil nu kunne opsætte din internet- eller netværksopkobling. Hvis du "
-#~ "ønsker at forbinde din maskine til internettet eller til et lokalnetværk "
-#~ "så klik på '%s'.\n"
-#~ "Mandriva Linux vil prøve at automatisk finde netværksenheder og modemer. "
-#~ "Hvis denne søgning mislykkes så fjern markeringen i boksen '%s'. Du kan "
-#~ "også vælge at ikke konfigurere netværket, eller gøre det senere; i så "
-#~ "tilfælde vil klik på '%s'-knappen føre dig til næste trin.\n"
-#~ "\n"
-#~ "Ved konfigurering af dit netværk er mulighederne for forbindelser: "
-#~ "almindeligt modem, ISDN-modem, ADSL-forbindelse, kabel-modem, og endelig "
-#~ "en simpel LAN-forbindelse (Ethernet).\n"
-#~ "\n"
-#~ "Vi vil ikke her gå i detaljer med hver konfigurationsmulighed, men "
-#~ "forsikr dig om, at du har alle parametrene, såsom IP-adresse, standard "
-#~ "gateway, DNS-servere mv., fra din internetudbyder eller "
-#~ "systemadministrator.\n"
-#~ "\n"
-#~ "Om Winmodem-forbindelser. Winmodemmer er specielle integrerede lav-ende "
-#~ "modemmer som kræver yderligere programmel for at virke sammenlignet med "
-#~ "normale modemmer. Nogen af disse modemmer virker faktisk under Mandrake "
-#~ "Linux, mens andre ikke gør det. Du kan kigge på listen over understøttede "
-#~ "Winmodemmer på netstedet www.LinModems.org.\n"
-#~ "Du kan læse i kapitlet i håndbogen omkring internetforbindelser om "
-#~ "detaljer omkring konfigureringen, eller simpelthen vente til dit system "
-#~ "er installeret og så bruge programmet beskrevet dér til at konfigurere "
-#~ "din forbindelse."
-
-#~ msgid "Use auto detection"
-#~ msgstr "Brug automatisk detektion"
-
-#~ msgid ""
-#~ "\"%s\": clicking on the \"%s\" button will open the printer "
-#~ "configuration\n"
-#~ "wizard. Consult the corresponding chapter of the ``Starter Guide'' for "
-#~ "more\n"
-#~ "information on how to setup a new printer. The interface presented there "
-#~ "is\n"
-#~ "similar to the one used during installation."
-#~ msgstr ""
-#~ "'%s': Et klik på '%s'-knappen vil åbne vejlederen for "
-#~ "printerkonfigurering. Kig i det tilhørende kapitel i 'Startvejledningen' "
-#~ "for mere information om hvordan man opsætter en ny printer. Grænsefladen\n"
-#~ "præsenteret der ligner den som bruges på installationstidspunktet."
-
-#~ msgid ""
-#~ "This dialog is used to choose which services you wish to start at boot\n"
-#~ "time.\n"
-#~ "\n"
-#~ "DrakX will list all the services available on the current installation.\n"
-#~ "Review each one carefully and uncheck those which are not needed at boot\n"
-#~ "time.\n"
-#~ "\n"
-#~ "A short explanatory text will be displayed about a service when it is\n"
-#~ "selected. However, if you are not sure whether a service is useful or "
-#~ "not,\n"
-#~ "it is safer to leave the default behavior.\n"
-#~ "\n"
-#~ "!! At this stage, be very careful if you intend to use your machine as a\n"
-#~ "server: you will probably not want to start any services that you do not\n"
-#~ "need. Please remember that several services can be dangerous if they are\n"
-#~ "enabled on a server. In general, select only the services you really "
-#~ "need.\n"
-#~ "!!"
-#~ msgstr ""
-#~ "Denne dialog bruges til at vælge hvilke tjenester du ønsker skal startes "
-#~ "ved opstart af maskinen.\n"
-#~ "\n"
-#~ "DrakX vil præsentere alle de tjenester, som er med i den aktuelle "
-#~ "installation. Gennemse hver enkelt omhyggeligt og vælg dem fra som ikke "
-#~ "er nødvendige på opstartstidspunktet.\n"
-#~ "\n"
-#~ "En kort forklarende tekst om en tjeneste bliver vist når den vælges. Hvis "
-#~ "du ikke er sikker på om en tjeneste er nyttig eller ej, er det dog "
-#~ "sikrere at bruge den foreslåede opførsel.\n"
-#~ "\n"
-#~ "Vær specielt varsom på dette trin hvis du planlægger at bruge maskinen "
-#~ "som server: du vil formentlig ønske ikke at starte nogensomhelst tjeneste "
-#~ "op som du ikke har brug for. Husk at adskillige tjenester kan være "
-#~ "farlige hvis de er aktiveret på en server. Vælg som hovedregel kun de "
-#~ "tjenester som du virkelig behøver."
-
-#~ msgid ""
-#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-#~ "local time according to the time zone you selected. If the clock on your\n"
-#~ "motherboard is set to local time, you may deactivate this by unselecting\n"
-#~ "\"%s\", which will let GNU/Linux know that the system clock and the\n"
-#~ "hardware clock are in the same time zone. This is useful when the "
-#~ "machine\n"
-#~ "also hosts another operating system like Windows.\n"
-#~ "\n"
-#~ "The \"%s\" option will automatically regulate the clock by connecting to "
-#~ "a\n"
-#~ "remote time server on the Internet. For this feature to work, you must "
-#~ "have\n"
-#~ "a working Internet connection. It is best to choose a time server "
-#~ "located\n"
-#~ "near you. This option actually installs a time server that can be used "
-#~ "by\n"
-#~ "other machines on your local network as well."
-#~ msgstr ""
-#~ "GNU/Linux håndterer tiden i GMT (Greenwich Mean Time) og oversætter den "
-#~ "til lokal tid ifølge den tidszone du har valgt. Hvis uret på bundkortet "
-#~ "er sat til lokal tid, kan du deaktivere dette ved at fravælge '%s', "
-#~ "hvilket vil lade GNU/Linux vide at systemuret og maskinens ur er i samme "
-#~ "tidszone. Dette er nyttigt når maskinen også bruges til andre "
-#~ "operativsystemer som Windows.\n"
-#~ "\n"
-#~ "Muligheden '%s' vil automatisk tilpasse uret ved at forbinde til en "
-#~ "ekstern tidsserver på internettet. For at denne facilitet kan virke, skal "
-#~ "du have en fungerende internetforbindelse. Det er bedst at vælge en "
-#~ "tidsserver med en placering nær ved dig. Denne mulighed installerer "
-#~ "faktisk en tidsserver som også kan bruges af andre maskiner på dit "
-#~ "lokalnetværk."
-
-#~ msgid ""
-#~ "Graphic Card\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "graphic card installed on your machine. If it is not the case, you can\n"
-#~ "choose from this list the card you actually have installed.\n"
-#~ "\n"
-#~ "   In the situation where different servers are available for your card,\n"
-#~ "with or without 3D acceleration, you are asked to choose the server that\n"
-#~ "best suits your needs."
-#~ msgstr ""
-#~ "Grafikkort\n"
-#~ "\n"
-#~ "   Installationsprogrammet vil normalt automatisk finde og konfigurere "
-#~ "grafikkortet installeret på din maskine. Hvis dette ikke er tilfældet, "
-#~ "kan du fra denne liste vælge det kort du faktisk har installeret.\n"
-#~ "   I tilfælde af at forskellige drivere er tilgængelige til dit kort, med "
-#~ "eller uden 3D-accelleration, bliver du spurgt om at vælge den server der "
-#~ "bedst opfylder dine behov."
-
-#~ msgid ""
-#~ "X (for X Window System) is the heart of the GNU/Linux graphical "
-#~ "interface\n"
-#~ "on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-#~ "WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-#~ "\n"
-#~ "You will be presented with a list of different parameters to change to "
-#~ "get\n"
-#~ "an optimal graphical display: Graphic Card\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "graphic card installed on your machine. If it is not the case, you can\n"
-#~ "choose from this list the card you actually have installed.\n"
-#~ "\n"
-#~ "   In the situation where different servers are available for your card,\n"
-#~ "with or without 3D acceleration, you are asked to choose the server that\n"
-#~ "best suits your needs.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Monitor\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "monitor connected to your machine. If it is incorrect, you can choose "
-#~ "from\n"
-#~ "this list the monitor you actually have connected to your computer.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Resolution\n"
-#~ "\n"
-#~ "   Here you can choose the resolutions and color depths available for "
-#~ "your\n"
-#~ "hardware. Choose the one that best suits your needs (you will be able to\n"
-#~ "change that after installation though). A sample of the chosen\n"
-#~ "configuration is shown in the monitor picture.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Test\n"
-#~ "\n"
-#~ "   Depending on your hardware, this entry might not appear.\n"
-#~ "\n"
-#~ "   the system will try to open a graphical screen at the desired\n"
-#~ "resolution. If you can see the message during the test and answer \"%s"
-#~ "\",\n"
-#~ "then DrakX will proceed to the next step. If you cannot see the message, "
-#~ "it\n"
-#~ "means that some part of the auto-detected configuration was incorrect "
-#~ "and\n"
-#~ "the test will automatically end after 12 seconds, bringing you back to "
-#~ "the\n"
-#~ "menu. Change settings until you get a correct graphical display.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Options\n"
-#~ "\n"
-#~ "   Here you can choose whether you want to have your machine "
-#~ "automatically\n"
-#~ "switch to a graphical interface at boot. Obviously, you want to check\n"
-#~ "\"%s\" if your machine is to act as a server, or if you were not "
-#~ "successful\n"
-#~ "in getting the display configured."
-#~ msgstr ""
-#~ "X (for X Window System) er hjertet af GNU/Linux' grafiske grænseflade som "
-#~ "alle de grafiske miljøer (KDE, GNOME, AfterStep, WindowMaker, mv.) der "
-#~ "kommer sammen med Mandriva Linux afhænger af.\n"
-#~ "\n"
-#~ "Du vil blive vist en liste med forskellige parametre der kan ændres for "
-#~ "at få den bedst mulige grafiske fremvisning:\n"
-#~ "\n"
-#~ "\n"
-#~ " \n"
-#~ "Grafikkort\n"
-#~ "\n"
-#~ "   Installationsprogrammet vil normalt automatisk finde ud af at "
-#~ "konfigurere grafikkortet installeret på din maskine. Hvis dette ikke er "
-#~ "tilfældet kan du fra denne liste vælge det kort du faktisk har "
-#~ "installeret.\n"
-#~ "\n"
-#~ "   I tilfælde af at forskellige drivere er tilgængelige til dit kort, med "
-#~ "eller uden 3D-accelleration, bliver du spurgt om at vælge den server der "
-#~ "bedst opfylder dine behov.\n"
-#~ "\n"
-#~ "\n"
-#~ "Skærm\n"
-#~ "\n"
-#~ "   Installationsprogrammet vil normalt automatisk finde ud af at "
-#~ "konfigurere skærmen tilsluttet din maskine. Hvis dette ikke er den "
-#~ "rigtige, kan du fra denne liste vælge den skærm du faktisk har tilsluttet "
-#~ "din maskine.\n"
-#~ "\n"
-#~ "\n"
-#~ "Opløsning\n"
-#~ "\n"
-#~ "   Du kan vælge opløsninger og farvedybder fra de tilgængelige muligheder "
-#~ "for dit udstyr. Vælg dem som bedst opfylder dine behov (du vil dog kunne "
-#~ "ændre dette efter installationen). En prøve på den valgte konfiguration "
-#~ "vil blive vist på skærmen.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Test\n"
-#~ "\n"
-#~ "   Afhængigt af dit udstyr vil denne indgang muligvis ikke vises.\n"
-#~ "\n"
-#~ "   Systemet vil prøve at åbne en grafisk skærm i den ønskede opløsning. "
-#~ "Hvis du kan se beskeden under afprøvningen og svarer '%s', så vil DrakX "
-#~ "gå videre til næste trin. Hvis du ikke kan se beskeden, betyder det at en "
-#~ "del af den automatisk fundne konfiguration var forkert og testen vil "
-#~ "automatisk slutte efter 12 sekunder, og bringe dig tilbage til menuen. "
-#~ "Ændr indstillingerne til du får en korrekt grafisk fremvisning.\n"
-#~ "\n"
-#~ "\n"
-#~ "\n"
-#~ "Valgmuligheder\n"
-#~ "\n"
-#~ "   Du kan hér vælge om du ønsker at din maskine automatisk skal skifte "
-#~ "til en grafisk grænseflade ved opstart. Selvfølgelig vil du ønske at "
-#~ "svare '%s', hvis din maskine skal bruges som server, eller hvis ikke "
-#~ "lykkedes dig at få skærmen konfigureret. "
-
-#~ msgid ""
-#~ "Monitor\n"
-#~ "\n"
-#~ "   The installer will normally automatically detect and configure the\n"
-#~ "monitor connected to your machine. If it is incorrect, you can choose "
-#~ "from\n"
-#~ "this list the monitor you actually have connected to your computer."
-#~ msgstr ""
-#~ "Skærm\n"
-#~ "\n"
-#~ "   Installationsprogrammet vil normalt automatisk finde ud af at "
-#~ "konfigurere skærmen tilsluttet din maskine. Hvis dette ikke er den "
-#~ "rigtige, kan du i denne liste vælge den skærm du faktisk har tilsluttet "
-#~ "din maskine."
-
-#~ msgid ""
-#~ "Resolution\n"
-#~ "\n"
-#~ "   Here you can choose the resolutions and color depths available for "
-#~ "your\n"
-#~ "hardware. Choose the one that best suits your needs (you will be able to\n"
-#~ "change that after installation though). A sample of the chosen\n"
-#~ "configuration is shown in the monitor picture."
-#~ msgstr ""
-#~ "Opløsning\n"
-#~ "\n"
-#~ "   Hér kan du vælge opløsninger og farvedybder ud af de tilgængelige "
-#~ "muligheder for dit udstyr. Vælg dem som bedst opfylder dine behov (du vil "
-#~ "dog kunne ændre dette efter installationen). Et eksempel på den valgte "
-#~ "konfiguration vil blive vist på skærmen."
-
-#~ msgid ""
-#~ "In the situation where different servers are available for your card, "
-#~ "with\n"
-#~ "or without 3D acceleration, you are asked to choose the server that best\n"
-#~ "suits your needs."
-#~ msgstr ""
-#~ "I tilfælde af at forskellige servere er tilgængelige for dit kort, med "
-#~ "eller uden 3D-accelleration, bliver du spurgt om at vælge den server der "
-#~ "bedst opfylder dine behov."
-
-#~ msgid ""
-#~ "Options\n"
-#~ "\n"
-#~ "   Here you can choose whether you want to have your machine "
-#~ "automatically\n"
-#~ "switch to a graphical interface at boot. Obviously, you want to check\n"
-#~ "\"%s\" if your machine is to act as a server, or if you were not "
-#~ "successful\n"
-#~ "in getting the display configured."
-#~ msgstr ""
-#~ "Til sidst valgmulighederne\n"
-#~ "\n"
-#~ "Hér kan du vælge om du ønsker automatisk at skifte til en grafisk "
-#~ "grænseflade ved opstart. Selvfølgelig vil du ønske at svare '%s', hvis "
-#~ "din maskine skal bruges som server, eller hvis ikke lykkedes dig at få "
-#~ "skærmen konfigureret."
-
-#~ msgid ""
-#~ "At this point, you need to decide where you want to install the Mandrake\n"
-#~ "Linux operating system on your hard drive. If your hard drive is empty "
-#~ "or\n"
-#~ "if an existing operating system is using all the available space you "
-#~ "will\n"
-#~ "have to partition the drive. Basically, partitioning a hard drive "
-#~ "consists\n"
-#~ "of logically dividing it to create the space needed to install your new\n"
-#~ "Mandriva Linux system.\n"
-#~ "\n"
-#~ "Because the process of partitioning a hard drive is usually irreversible\n"
-#~ "and can lead to lost data if there is an existing operating system "
-#~ "already\n"
-#~ "installed on the drive, partitioning can be intimidating and stressful "
-#~ "if\n"
-#~ "you are an inexperienced user. Fortunately, DrakX includes a wizard "
-#~ "which\n"
-#~ "simplifies this process. Before continuing with this step, read through "
-#~ "the\n"
-#~ "rest of this section and above all, take your time.\n"
-#~ "\n"
-#~ "Depending on your hard drive configuration, several options are "
-#~ "available:\n"
-#~ "\n"
-#~ " * \"%s\": this option will perform an automatic partitioning of your "
-#~ "blank\n"
-#~ "drive(s). If you use this option there will be no further prompts.\n"
-#~ "\n"
-#~ " * \"%s\": the wizard has detected one or more existing Linux partitions "
-#~ "on\n"
-#~ "your hard drive. If you want to use them, choose this option. You will "
-#~ "then\n"
-#~ "be asked to choose the mount points associated with each of the "
-#~ "partitions.\n"
-#~ "The legacy mount points are selected by default, and for the most part "
-#~ "it's\n"
-#~ "a good idea to keep them.\n"
-#~ "\n"
-#~ " * \"%s\": if Microsoft Windows is installed on your hard drive and "
-#~ "takes\n"
-#~ "all the space available on it, you will have to create free space for\n"
-#~ "GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-#~ "data (see ``Erase entire disk'' solution) or resize your Microsoft "
-#~ "Windows\n"
-#~ "FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-#~ "data, provided you have previously defragmented the Windows partition.\n"
-#~ "Backing up your data is strongly recommended.. Using this option is\n"
-#~ "recommended if you want to use both Mandriva Linux and Microsoft Windows "
-#~ "on\n"
-#~ "the same computer.\n"
-#~ "\n"
-#~ "   Before choosing this option, please understand that after this\n"
-#~ "procedure, the size of your Microsoft Windows partition will be smaller\n"
-#~ "then when you started. You will have less free space under Microsoft\n"
-#~ "Windows to store your data or to install new software.\n"
-#~ "\n"
-#~ " * \"%s\": if you want to delete all data and all partitions present on\n"
-#~ "your hard drive and replace them with your new Mandriva Linux system,\n"
-#~ "choose this option. Be careful, because you will not be able to undo "
-#~ "your\n"
-#~ "choice after you confirm.\n"
-#~ "\n"
-#~ "   !! If you choose this option, all data on your disk will be "
-#~ "deleted. !!\n"
-#~ "\n"
-#~ " * \"%s\": this will simply erase everything on the drive and begin "
-#~ "fresh,\n"
-#~ "partitioning everything from scratch. All data on your disk will be "
-#~ "lost.\n"
-#~ "\n"
-#~ "   !! If you choose this option, all data on your disk will be lost. !!\n"
-#~ "\n"
-#~ " * \"%s\": choose this option if you want to manually partition your "
-#~ "hard\n"
-#~ "drive. Be careful -- it is a powerful but dangerous choice and you can "
-#~ "very\n"
-#~ "easily lose all your data. That's why this option is really only\n"
-#~ "recommended if you have done something like this before and have some\n"
-#~ "experience. For more instructions on how to use the DiskDrake utility,\n"
-#~ "refer to the ``Managing Your Partitions'' section in the ``Starter "
-#~ "Guide''."
-#~ msgstr ""
-#~ "Nu skal du vælge hvor på din harddisk du vil installere dit Mandriva "
-#~ "Linux-operativsystem. Hvis disken er tom eller et eksisterende "
-#~ "operativsystem bruger alt pladsen på den, bliver du nødt til at "
-#~ "partitionere drevet. Partitionering vil sige at diskdrevet opdeles i "
-#~ "logiske dele for at lave den plads der behøves til at installere dit nye "
-#~ "Mandriva Linux-system.\n"
-#~ "\n"
-#~ "Da partitioneringen af en disk normalt ikke kan fortrydes og kan føre til "
-#~ "tab af data, hvis der allerede er et eksisterende operativsystem "
-#~ "installeret på drevet, kan det godt være frustrerende og stressende for "
-#~ "uøvede brugere. Heldigvis har DrakX en vejleder som forenkler denne "
-#~ "proces. Før du fortsætter med dette trin kan du gennemlæse resten af "
-#~ "dette afsnit, og ikke mindst tage dig den tid du behøver.\n"
-#~ "\n"
-#~ "Afhængig af dit diskdrevs konfiguration er flere muligheder tilstede:\n"
-#~ "\n"
-#~ " * '%s': Denne mulighed vil udføre en automatisk opdeling af dine tomme "
-#~ "diskdrev. Hvis du bruger denne mulighed vil du ikke blive spurgt om "
-#~ "mere.\n"
-#~ "\n"
-#~ " * '%s': vejlederen har fundet en eller flere eksisterende Linux-"
-#~ "partitioner på dit diskdrev. Hvis du vil bruge dem, så vælg denne "
-#~ "mulighed. Du vil så blive spurgt om monteringspunkter tilknyttet hver af "
-#~ "partitionerne. De gamle monteringspunkter er forvalgt og i de fleste "
-#~ "tilfælde er det en god idé at beholde dem.\n"
-#~ "\n"
-#~ " * '%s': hvis Microsoft Windows er installeret på din disk og bruger al "
-#~ "pladsen, bliver du nødt til at lave fri plads til GNU/Linux. For at gøre "
-#~ "dette kan du slette dine Microsoft Windows partitioner og data (se "
-#~ "muligheden \"Slet hele disken\") eller ændre størrelsen på din Microsoft "
-#~ "Windows-FAT- eller NTFS-partition. Størrelsesændringen kan fortages uden "
-#~ "tab af data, hvis du i forvejen har defragmenteret Windows-partitionen. "
-#~ "Det anbefales på det kraftigste at du laver en sikkerhedskopi først. "
-#~ "Denne mulighed anbefales hvis du vil bruge både Mandriva Linux og "
-#~ "Microsoft Windows på samme maskine.\n"
-#~ "\n"
-#~ "  Før du vælger denne løsning, bør du forstå at størrelsen på din "
-#~ "Microsoft Windows partition vil blive mindre end da du startede. Du vil "
-#~ "have mindre fri plads under Microsoft Windows til at gemme dine data "
-#~ "eller installere nyt programmel.\n"
-#~ "\n"
-#~ " * '%s': hvis du vil slette alle data på alle partitioner på denne disk "
-#~ "og erstatte dem med dit nye Mandriva Linux-system, kan du vælge denne "
-#~ "mulighed. Vær forsigtig, for du vil ikke være i stand til at fortryde "
-#~ "dine ændringer efter at du har sagt ja.\n"
-#~ "\n"
-#~ "   !! Hvis du bruger denne mulighed vil alle eksisterende data på din "
-#~ "disk gå tabt. !!\n"
-#~ "\n"
-#~ " * '%s': dette vil simpelthen slette alt på disken og begynde fra en "
-#~ "frisk, og partitionere fra ny. Alle data på din disk vil gå tabt.\n"
-#~ "\n"
-#~ "   !! Hvis du bruger denne mulighed vil alle eksisterende data på din "
-#~ "disk gå tabt. !!\n"
-#~ "\n"
-#~ " * '%s': vælg denne mulighed hvis du vil partitionere disken i hånden. "
-#~ "Vær forsigtig - det er en stærk , men også farlig mulighed. og du kan "
-#~ "meget nemt komme til at slette alle dine data. Derfor er denne mulighed "
-#~ "kun anbefalet hvis du har lavet noget lignende før og har nogen erfaring. "
-#~ "For flere instruktioner om brugen af DiskDrake-programmet kan du se i "
-#~ "afsnittet 'Administrér dine partitioner' i 'Startervejledningen'."
-
-#~ msgid ""
-#~ "There you are. Installation is now complete and your GNU/Linux system is\n"
-#~ "ready to use. Just click \"%s\" to reboot the system. Do not forget to\n"
-#~ "remove the installation media (CD-ROM or floppy). The first thing you\n"
-#~ "should see after your computer has finished doing its hardware tests is "
-#~ "the\n"
-#~ "bootloader menu, giving you the choice of which operating system to "
-#~ "start.\n"
-#~ "\n"
-#~ "The \"%s\" button shows two more buttons to:\n"
-#~ "\n"
-#~ " * \"%s\": to create an installation floppy disk that will automatically\n"
-#~ "perform a whole installation without the help of an operator, similar to\n"
-#~ "the installation you just configured.\n"
-#~ "\n"
-#~ "   Note that two different options are available after clicking the "
-#~ "button:\n"
-#~ "\n"
-#~ "    * \"%s\". This is a partially automated installation. The "
-#~ "partitioning\n"
-#~ "step is the only interactive procedure.\n"
-#~ "\n"
-#~ "    * \"%s\". Fully automated installation: the hard disk is completely\n"
-#~ "rewritten, all data is lost.\n"
-#~ "\n"
-#~ "   This feature is very handy when installing a number of similar "
-#~ "machines.\n"
-#~ "See the Auto install section on our web site for more information.\n"
-#~ "\n"
-#~ " * \"%s\": saves a list of the packages selected in this installation. "
-#~ "To\n"
-#~ "use this selection with another installation, insert the floppy and "
-#~ "start\n"
-#~ "the installation. At the prompt, press the [F1] key and type >>linux\n"
-#~ "defcfg=\"floppy\" <<."
-#~ msgstr ""
-#~ "Værsgo'. Installationen en nu færdig og dit GNU/Linux-system er nu klar "
-#~ "til brug. Klik blot på '%s' for at genstarte systemet. Glem ikke at "
-#~ "fjerne installationsmediet (cdrom eller diskette). Den første ting, som "
-#~ "du burde se, efter din maskine har lavet sine test af maskinel, er "
-#~ "opstartsmenuen, som lader dig vælge det operativsystem der skal startes.\n"
-#~ "\n"
-#~ "'%s'-knappen viser to ekstra knapper for:\n"
-#~ "\n"
-#~ " * '%s': at oprette en installerings-diskette, som automatisk vil udføre "
-#~ "en hel installation uden hjælp fra en operatør, magen til den "
-#~ "installation du lige har konfigureret.\n"
-#~ "\n"
-#~ "   Bemærk at to forskellige muligheder er tilstede efter klik på "
-#~ "knappen:\n"
-#~ "\n"
-#~ "   * '%s': Dette er en delvist automatiseret installering. "
-#~ "Partitioneringstrinnet er den eneste interaktive procedure.\n"
-#~ "\n"
-#~ "   * '%s': Fuldautomatisk installering: harddisken bliver fuldstændig "
-#~ "genoverskrevet, alle data forsvinder.\n"
-#~ "\n"
-#~ "   Denne facilitet er meget nyttig ved installering af et antal lignende "
-#~ "maskiner. Se afsnittet om autoinstallering på vores websted for "
-#~ "yderligere oplysninger.\n"
-#~ "\n"
-#~ " * '%s'(*): gemmer en liste med de pakker der er valgt under denne "
-#~ "installation. For at bruge dette pakkevalg i en anden installation kan "
-#~ "disketten indsættes i drevet og installeringen kan startes. Brug [F1]-"
-#~ "tasten på opstartsskærmen og indtast >>linux defcfg=\"floppy\"<<."
-
-#~ msgid ""
-#~ "Any partitions that have been newly defined must be formatted for use\n"
-#~ "(formatting means creating a file system).\n"
-#~ "\n"
-#~ "At this time, you may wish to reformat some already existing partitions "
-#~ "to\n"
-#~ "erase any data they contain. If you wish to do that, please select those\n"
-#~ "partitions as well.\n"
-#~ "\n"
-#~ "Please note that it is not necessary to reformat all pre-existing\n"
-#~ "partitions. You must reformat the partitions containing the operating\n"
-#~ "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-#~ "reformat partitions containing data that you wish to keep (typically\n"
-#~ "\"/home\").\n"
-#~ "\n"
-#~ "Please be careful when selecting partitions. After formatting, all data "
-#~ "on\n"
-#~ "the selected partitions will be deleted and you will not be able to "
-#~ "recover\n"
-#~ "it.\n"
-#~ "\n"
-#~ "Click on \"%s\" when you are ready to format the partitions.\n"
-#~ "\n"
-#~ "Click on \"%s\" if you want to choose another partition for your new\n"
-#~ "Mandriva Linux operating system installation.\n"
-#~ "\n"
-#~ "Click on \"%s\" if you wish to select partitions that will be checked "
-#~ "for\n"
-#~ "bad blocks on the disk."
-#~ msgstr ""
-#~ "Enhver partition der netop er blevet defineret, skal formateres til brug "
-#~ "(formatering betyder oprettelse af et filsystem).\n"
-#~ "\n"
-#~ "Nu kan du også ønske at omformatere nogle allerede eksisterende "
-#~ "partitioner for at slette de data som de indeholder. Hvis du ønsker "
-#~ "dette, så markér også de partitioner som du ønsker at formatere.\n"
-#~ "\n"
-#~ "Bemærk at det ikke er nødvendigt at omformatere alle allerede "
-#~ "eksisterende partitioner. Det er nødvendigt at omformatere de "
-#~ "partitioner, der indeholder operativsystemet (såsom '/', '/usr' og '/"
-#~ "var', men du er ikke nødt til at omformatere partitioner som du ønsker at "
-#~ "beholde (typisk /home).\n"
-#~ "\n"
-#~ "Vær forsigtig med valg af partitioner; efter formatering vil alle data "
-#~ "være slettede på de valgte partitioner, og du vil ikke kunne redde "
-#~ "nogetsomhelst af det.\n"
-#~ "\n"
-#~ "Klik på '%s' når du er klar til at formatere partitionerne.\n"
-#~ "\n"
-#~ "Klik på '%s' hvis du ønsker at vælge andre partitioner til at installere "
-#~ "dit nye Mandriva Linux operativsystem.\n"
-#~ "\n"
-#~ "Klik på '%s' for at vælge partitioner som du ønsker at tjekke for dårlige "
-#~ "blokke."
-
-#~ msgid ""
-#~ "At the time you are installing Mandriva Linux, it is likely that some\n"
-#~ "packages will have been updated since the initial release. Bugs may have\n"
-#~ "been fixed, security issues resolved. To allow you to benefit from these\n"
-#~ "updates, you are now able to download them from the Internet. Check \"%s"
-#~ "\"\n"
-#~ "if you have a working Internet connection, or \"%s\" if you prefer to\n"
-#~ "install updated packages later.\n"
-#~ "\n"
-#~ "Choosing \"%s\" will display a list of places from which updates can be\n"
-#~ "retrieved. You should choose one near to you. A package-selection tree "
-#~ "will\n"
-#~ "appear: review the selection, and press \"%s\" to retrieve and install "
-#~ "the\n"
-#~ "selected package(s), or \"%s\" to abort."
-#~ msgstr ""
-#~ "På det tidspunkt hvor du installerer Mandriva Linux er det sandsynligt at "
-#~ "nogen af pakkerne er blevet opdaterede siden den oprindelige udgivelse. "
-#~ "Fejl er måske blevet rettet, og sikkerhedsproblemer måske løst. Det er nu "
-#~ "muligt for dig at hente disse ned fra internettet for at disse "
-#~ "opdateringer kan komme dig til gode. Vælg '%s' hvis du har en fungerende "
-#~ "internet- forbindelse eller '%s' hvis du foretrækker at installere "
-#~ "opdaterede pakker senere.\n"
-#~ "\n"
-#~ "Valg af '%s' viser en liste af steder hvorfra opdateringer kan hentes. Du "
-#~ "bør vælge en der er nær ved dig. Så vil et træ med pakkevalg blive vist: "
-#~ "gennemse valget og tryk '%s' for at modtage og installere de valgte "
-#~ "pakker eller '%s' for at afbryde."
-
-#~ msgid ""
-#~ "At this point, DrakX will allow you to choose the security level desired\n"
-#~ "for the machine. As a rule of thumb, the security level should be set\n"
-#~ "higher if the machine will contain crucial data, or if it will be a "
-#~ "machine\n"
-#~ "directly exposed to the Internet. The trade-off of a higher security "
-#~ "level\n"
-#~ "is generally obtained at the expense of ease of use.\n"
-#~ "\n"
-#~ "If you do not know what to choose, stay with the default option. You "
-#~ "will\n"
-#~ "be able to change that security level later with tool draksec from the\n"
-#~ "Mandrake Control Center.\n"
-#~ "\n"
-#~ "The \"%s\" field can inform the system of the user on this computer who\n"
-#~ "will be responsible for security. Security messages will be sent to that\n"
-#~ "address."
-#~ msgstr ""
-#~ "Nu vil DrakX give dig mulighed for at vælge det ønskede sikkerhedsniveau "
-#~ "for maskinen. Hovedreglen er at sikkerhedsniveauet bør sættes højere, "
-#~ "hvis maskinen skal indeholde vigtige data, eller hvis makinen vil være "
-#~ "direkte offentligt på Internettet. Men et højere sikkerhedsniveau vindes "
-#~ "normalt på bekostning af letheden af anvendelsen.\n"
-#~ "\n"
-#~ "Hvis du ikke véd hvad du skal vælge, så behold den foreslåede mulighed. "
-#~ "Du vil kunne ændre dette sikkerhedsniveau senere med værktøjet draksec "
-#~ "fra Mandrake Kontrolcentret.\n"
-#~ "\n"
-#~ "'%s'-feltet kan informere systemet om den bruger på denne maskine, som "
-#~ "vil være ansvarlig for sikkerhed. Sikkerhedsmeddelelser vil blive sendt "
-#~ "til denne adresse."
-
-#~ msgid ""
-#~ "\"%s\": check the current country selection. If you are not in this\n"
-#~ "country, click on the \"%s\" button and choose another one. If your "
-#~ "country\n"
-#~ "is not in the first list shown, click the \"%s\" button to get the "
-#~ "complete\n"
-#~ "country list."
-#~ msgstr ""
-#~ "'%s': Tjek det aktuelle valg af land. Hvis du ikke er i dette land, så "
-#~ "klik på '%s'-knappen og vælg et andet. Hvis dit land ikke er på den "
-#~ "første liste der vistes, så klik på '%s'-knappen for at få den komplette "
-#~ "liste over lande."
-
-#~ msgid ""
-#~ "This step is activated only if an existing GNU/Linux partition has been\n"
-#~ "found on your machine.\n"
-#~ "\n"
-#~ "DrakX now needs to know if you want to perform a new install or an "
-#~ "upgrade\n"
-#~ "of an existing Mandriva Linux system:\n"
-#~ "\n"
-#~ " * \"%s\": For the most part, this completely wipes out the old system. "
-#~ "If\n"
-#~ "you wish to change how your hard drives are partitioned, or change the "
-#~ "file\n"
-#~ "system, you should use this option. However, depending on your "
-#~ "partitioning\n"
-#~ "scheme, you can prevent some of your existing data from being over-"
-#~ "written.\n"
-#~ "\n"
-#~ " * \"%s\": this installation class allows you to update the packages\n"
-#~ "currently installed on your Mandriva Linux system. Your current\n"
-#~ "partitioning scheme and user data is not altered. Most of other\n"
-#~ "configuration steps remain available, similar to a standard "
-#~ "installation.\n"
-#~ "\n"
-#~ "Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-#~ "running version \"8.1\" or later. Performing an Upgrade on versions "
-#~ "prior\n"
-#~ "to Mandriva Linux version \"8.1\" is not recommended."
-#~ msgstr ""
-#~ "Dette trin bliver kun aktiveret hvis der bliver fundet en eksisterende\n"
-#~ "GNU/Linux partition på din maskine.\n"
-#~ "\n"
-#~ "DrakX skal nu vide om du vil udføre en ny installation eller en "
-#~ "opgradering\n"
-#~ "af et eksisterende Mandriva Linux-system.\n"
-#~ "\n"
-#~ " * \"%s\": Dette vil stort sét slette hele det gamle system. Hvis du "
-#~ "ønsker at ændre hvordan diskene bliver partitioneret, eller ændre på "
-#~ "filsystemene, bør du vælge denne mulighed. Men, afhængigt af hvordan du "
-#~ "partitionerer, kan du forhindre at nogen af dine eksisterende data fra at "
-#~ "blive overskrevne. \n"
-#~ "\n"
-#~ " * \"%s\": Denne installationsklasse lader dig opgradere pakkene som er "
-#~ "installeret på dit nuværende Mandriva Linux-system. Din nuværende "
-#~ "partitionsopsætning og brugerdata bliver ikke berørt. De fleste andre "
-#~ "konfigurationstrin forbliver tilgængelige, i lighed med en "
-#~ "standardinstallation.\n"
-#~ "\n"
-#~ "\"Opgradér\"-valget bør fungere på Mandriva Linux-systemer som kører "
-#~ "version 8.1 eller nyere. Udførelse af Opgradér på versioner tidligere end "
-#~ "Mandriva Linux 8.1 er ikke anbefalet."
-
-#~ msgid ""
-#~ "Depending on the language you chose in section , DrakX will "
-#~ "automatically\n"
-#~ "select a particular type of keyboard configuration. Check that the\n"
-#~ "selection suits you or choose another keyboard layout.\n"
-#~ "\n"
-#~ "Also, you may not have a keyboard that corresponds exactly to your\n"
-#~ "language: for example, if you are an English-speaking Swiss native, you "
-#~ "may\n"
-#~ "have a Swiss keyboard. Or if you speak English and are located in "
-#~ "Quebec,\n"
-#~ "you may find yourself in the same situation where your native language "
-#~ "and\n"
-#~ "country-set keyboard do not match. In either case, this installation "
-#~ "step\n"
-#~ "will allow you to select an appropriate keyboard from a list.\n"
-#~ "\n"
-#~ "Click on the \"%s\" button to be presented with the complete list of\n"
-#~ "supported keyboards.\n"
-#~ "\n"
-#~ "If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-#~ "dialog will allow you to choose the key binding that will switch the\n"
-#~ "keyboard between the Latin and non-Latin layouts."
-#~ msgstr ""
-#~ "Afhængigt af det sprog du har valgt vil DrakX automatisk vælge en bestemt "
-#~ "type tastaturopsætning. Tjek at valget er passende, eller vælg en anden "
-#~ "tastaturudlægning.\n"
-#~ "Men du har måske ikke et tastatur som svarer nøjagtigt til dit sprog: for "
-#~ "eksempel hvis du er en engelsktalende svejtser, vil du måske have et "
-#~ "svejtsisk tastatur. Eller hvis du taler engelsk og bor i Québec, er du "
-#~ "måske i samme situation, hvor dit modersmål og tastaturet for landet ikke "
-#~ "passer sammen. I begge tilfælde giver dette installationstrin mulighed "
-#~ "for at vælge et passende tastatur fra listen.\n"
-#~ "\n"
-#~ "Klik på '%s'-tasten for at blive præsenteret for den fulde liste af "
-#~ "understøttede tastaturer.\n"
-#~ "\n"
-#~ "Hvis du vælger en tastaturudlægning baseret på et ikke-latinsk alfabet, "
-#~ "vil den næste dialog give dig mulighed for at vælge den tastekombination, "
-#~ "der vil skifte mellem den latinske og den ikke-latinske udlægning."
-
-#~ msgid ""
-#~ "Your choice of preferred language will affect the language of the\n"
-#~ "documentation, the installer and the system in general. Select first the\n"
-#~ "region you are located in, and then the language you speak.\n"
-#~ "\n"
-#~ "Clicking on the \"%s\" button will allow you to select other languages "
-#~ "to\n"
-#~ "be installed on your workstation, thereby installing the language-"
-#~ "specific\n"
-#~ "files for system documentation and applications. For example, if you "
-#~ "will\n"
-#~ "host users from Spain on your machine, select English as the default\n"
-#~ "language in the tree view and \"%s\" in the Advanced section.\n"
-#~ "\n"
-#~ "About UTF-8 (unicode) support: Unicode is a new character encoding meant "
-#~ "to\n"
-#~ "cover all existing languages. Though full support for it in GNU/Linux is\n"
-#~ "still under development. For that reason, Mandriva Linux will be using "
-#~ "it\n"
-#~ "or not depending on the user choices:\n"
-#~ "\n"
-#~ " * If you choose a languages with a strong legacy encoding (latin1\n"
-#~ "languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, "
-#~ "most\n"
-#~ "iso-8859-2 languages), the legacy encoding will be used by default;\n"
-#~ "\n"
-#~ " * Other languages will use unicode by default;\n"
-#~ "\n"
-#~ " * If two or more languages are required, and those languages are not "
-#~ "using\n"
-#~ "the same encoding, then unicode will be used for the whole system;\n"
-#~ "\n"
-#~ " * Finally, unicode can also be forced for the system at user request by\n"
-#~ "selecting option \"%s\" independently of which language(s) have been\n"
-#~ "chosen.\n"
-#~ "\n"
-#~ "Note that you're not limited to choosing a single additional language. "
-#~ "You\n"
-#~ "may choose several ones, or even install them all by selecting the \"%s"
-#~ "\"\n"
-#~ "box. Selecting support for a language means translations, fonts, spell\n"
-#~ "checkers, etc. for that language will also be installed.\n"
-#~ "\n"
-#~ "To switch between the various languages installed on the system, you can\n"
-#~ "launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-#~ "language used by the entire system. Running the command as a regular "
-#~ "user\n"
-#~ "will only change the language settings for that particular user."
-#~ msgstr ""
-#~ "Dit valg af foretrukkent sprog vil påvirke sproget for dokumentationen, "
-#~ "installeringen og systemet generelt. Vælg først den verdensdel du "
-#~ "befinder dig i, og så det sprog, du taler.\n"
-#~ "\n"
-#~ "Hvis du klikker på '%s'-knappen kan du vælge andre sprog, der "
-#~ "installeres  på maskinen, og derved installeres de sprogspecifikke filer "
-#~ "for systemdokumentation og programmer. Hvis du for eksempel beværter folk "
-#~ "fra Spanien på din maskine, vælg da dansk som standardsproget i træ-"
-#~ "visningen, og '%s' i den avancerede afdeling.\n"
-#~ "\n"
-#~ "Bemærk at du ikke er begrænset til at vælge et enkelt yderligere sprog. "
-#~ "Du kan vælge flere sprog, eller endog installere dem alle ved at markere "
-#~ "'%s'-boksen. Valg af understøttelse for et sprog betyder at "
-#~ "oversættelser, skrifttyper, stavekontrol mv for dette sprog bliver "
-#~ "installeret. Ydermere vil '%s'-boksen gøre at systemet tvinges til at "
-#~ "bruge ISO 10646 (UTF-8). Bemærk dog at dette er en eksperimentel "
-#~ "facilitet. Hvis du vælger forskellige sprog der kræver forskellige "
-#~ "kodninger, vil ISO 10646-understøttelse blive installeret under alle "
-#~ "omstændigheder.\n"
-#~ "\n"
-#~ "For at skifte mellem de forskellige sprog installeret på systemet kan du "
-#~ "starte programmet '/usr/sbin/localedrake' som 'root' for at ændre det "
-#~ "sprog der bruges af hele systemet. Kørsel af dette program som almindelig "
-#~ "bruger vil kun ændre sprogindstillingerne for denne bruger."
-
-#~ msgid ""
-#~ "Usually, DrakX has no problems detecting the number of buttons on your\n"
-#~ "mouse. If it does, it assumes you have a two-button mouse and will\n"
-#~ "configure it for third-button emulation. The third-button mouse button of "
-#~ "a\n"
-#~ "two-button mouse can be ``pressed'' by simultaneously clicking the left "
-#~ "and\n"
-#~ "right mouse buttons. DrakX will automatically know whether your mouse "
-#~ "uses\n"
-#~ "a PS/2, serial or USB interface.\n"
-#~ "\n"
-#~ "In case you have a 3 buttons mouse without wheel, you can choose the "
-#~ "mouse\n"
-#~ "that says \"%s\". DrakX will then configure your mouse so that you can\n"
-#~ "simulate the wheel with it: to do so, press the middle button and move "
-#~ "your\n"
-#~ "mouse up and down.\n"
-#~ "\n"
-#~ "If for some reason you wish to specify a different type of mouse, select "
-#~ "it\n"
-#~ "from the list provided.\n"
-#~ "\n"
-#~ "If you choose a mouse other than the default, a test screen will be\n"
-#~ "displayed. Use the buttons and wheel to verify that the settings are\n"
-#~ "correct and that the mouse is working correctly. If the mouse is not\n"
-#~ "working well, press the space bar or [Return] key to cancel the test and "
-#~ "to\n"
-#~ "go back to the list of choices.\n"
-#~ "\n"
-#~ "Wheel mice are occasionally not detected automatically, so you will need "
-#~ "to\n"
-#~ "select your mouse from a list. Be sure to select the one corresponding "
-#~ "to\n"
-#~ "the port that your mouse is attached to. After selecting a mouse and\n"
-#~ "pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
-#~ "the mouse wheel to ensure that it is activated correctly. Once you see "
-#~ "the\n"
-#~ "on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
-#~ "buttons and check that the mouse pointer moves on-screen as you move "
-#~ "your\n"
-#~ "mouse."
-#~ msgstr ""
-#~ "Normalt har DrakX ingen problemer med at finde ud af hvor mange knapper "
-#~ "du har på din mus. Den antager at du har en to-knapsmus og vil lave en "
-#~ "opsætning hvor den tredje knap emuleres. Den tredje knap for en to-knaps "
-#~ "mus emuleres ved at trykke på den venstre og højre museknap samtidigt. "
-#~ "DrakX vil automatisk vide om din mus bruger et PS/2, et serielt eller et "
-#~ "USB-grænsesnit.\n"
-#~ "\n"
-#~ "Hvis du har en 3-knaps mus uden hjul, kan du vælge musen som siger \"%s"
-#~ "\". DrakX vil så konfigurere din mus så du kan simulere hjulet med den: "
-#~ "for at gøre dette skal du trykke på midterknappen og flyttte op og ned på "
-#~ "musen.\n"
-#~ "\n"
-#~ "Hvis du ønsker en anden type mus, vælg da den rigtige type mus fra den "
-#~ "viste liste.\n"
-#~ "\n"
-#~ "Hvis du vælger en mus forskellig fra den forvalgte, vil du blive "
-#~ "præsenteret for en skærm for museafprøvning. Brug knapperne og hjulet for "
-#~ "at efterprøve om indstillerne er korrekte, og at musen virker korrekt. "
-#~ "Hvis musen ikke virker korrekt, tryk da på mellemrumstangenten eller "
-#~ "vognretur for at annullere testen og gå tilbage til listen med valg.\n"
-#~ "\n"
-#~ "Mus med hjul findes til tider ikke automatisk, så du vil behøve at vælge "
-#~ "din mus fra en liste. Forsikr dig om at du vælger den der passer til "
-#~ "porten som din mus er tilsluttet. Efter valg af en mus og trykning på '%"
-#~ "s'-knappen vises et billede med en mus på skærmen. Rul med musehjulet for "
-#~ "at forsikre dig om at det aktiveres korrekt. Når du har set at musehjulet "
-#~ "på skærmen bevæger sig som du ruller med musehjulet, så afprøv "
-#~ "museknapperne og tjek at musemarkøren flytter sig når du flytter på musen."
-
-#~ msgid ""
-#~ "This is the most crucial decision point for the security of your GNU/"
-#~ "Linux\n"
-#~ "system: you have to enter the \"root\" password. \"Root\" is the system\n"
-#~ "administrator and is the only user authorized to make updates, add "
-#~ "users,\n"
-#~ "change the overall system configuration, and so on. In short, \"root\" "
-#~ "can\n"
-#~ "do everything! That is why you must choose a password that is difficult "
-#~ "to\n"
-#~ "guess - DrakX will tell you if the password you chose is too easy. As "
-#~ "you\n"
-#~ "can see, you are not forced to enter a password, but we strongly advise "
-#~ "you\n"
-#~ "against this. GNU/Linux is just as prone to operator error as any other\n"
-#~ "operating system. Since \"root\" can overcome all limitations and\n"
-#~ "unintentionally erase all data on partitions by carelessly accessing the\n"
-#~ "partitions themselves, it is important that it be difficult to become\n"
-#~ "\"root\".\n"
-#~ "\n"
-#~ "The password should be a mixture of alphanumeric characters and at least "
-#~ "8\n"
-#~ "characters long. Never write down the \"root\" password -- it makes it "
-#~ "far\n"
-#~ "too easy to compromise a system.\n"
-#~ "\n"
-#~ "One caveat -- do not make the password too long or complicated because "
-#~ "you\n"
-#~ "must be able to remember it!\n"
-#~ "\n"
-#~ "The password will not be displayed on screen as you type it in. To "
-#~ "reduce\n"
-#~ "the chance of a blind typing error you will need to enter the password\n"
-#~ "twice. If you do happen to make the same typing error twice, this\n"
-#~ "``incorrect'' password will be the one you will have use the first time "
-#~ "you\n"
-#~ "connect.\n"
-#~ "\n"
-#~ "If you wish access to this computer to be controlled by an "
-#~ "authentication\n"
-#~ "server, click the \"%s\" button.\n"
-#~ "\n"
-#~ "If your network uses either LDAP, NIS, or PDC Windows Domain "
-#~ "authentication\n"
-#~ "services, select the appropriate one for \"%s\". If you do not know "
-#~ "which\n"
-#~ "one to use, you should ask your network administrator.\n"
-#~ "\n"
-#~ "If you happen to have problems with remembering passwords, if your "
-#~ "computer\n"
-#~ "will never be connected to the Internet and you absolutely trust "
-#~ "everybody\n"
-#~ "who uses your computer, you can choose to have \"%s\"."
-#~ msgstr ""
-#~ "Dette er den vanskeligste beslutning omkring sikkerheden af dit GNU/"
-#~ "Linux- system: Du skal indtaste din 'root'-adgangskode. 'Root' er "
-#~ "systemadministratoren og er den eneste bruger, der har lov til at lave "
-#~ "opdateringer, tilføje brugere, ændre i den overordnede "
-#~ "systemkonfiguration og så videre. Kort sagt, 'root' kan gøre alt! Derfor "
-#~ "skal du vælge en adgangskode der er svær at gætte - DrakX vil fortælle "
-#~ "dig hvis adgangskoden du valgte er for nem. Som du kan se er du ikke "
-#~ "tvunget til at indtaste en adgangskode, men vi advarer dig på det "
-#~ "kraftigste mod dette. GNU/Linux er lige så udsat for behandlingsfejl som "
-#~ "ethvert andet operativsystem. Da 'root' kan overvinde alle forhindringer "
-#~ "og uforvarende slette alle data på partitioner ved sorgløst at behandle "
-#~ "partitionerne selv, er det vigtigt at det er vanskeligt at blive 'root'.\n"
-#~ "\n"
-#~ "Adgangskoden bør være en blanding af bogstaver og tal og mindst 8 tegn "
-#~ "langt. Skriv aldrig en adgangskode ned for 'root' - det gør det alt for "
-#~ "nemt at bryde ind i et system.\n"
-#~ "\n"
-#~ "Gør dog ikke adgangskoden for lang eller kompliceret da du skal være i "
-#~ "stand til at huske den uden for stort besvær!\n"
-#~ "\n"
-#~ "Adgangskoden vil ikke blive vist på skærmen når du indtaster den. Du skal "
-#~ "derfor indtaste adgangskoden to gange, for at begrænse risikoen for "
-#~ "tastefejl. Hvis du kommer til at lave den samme tastefejl to gange, vil "
-#~ "denne 'ukorrekte' adgangskode være den du skal bruge første gang du "
-#~ "forbinder dig til systemet.\n"
-#~ "\n"
-#~ "Hvis du ønsker at adgang til denne maskine skal være styret af en "
-#~ "autenticerings-server, så klik på '%s'-knappen.\n"
-#~ "\n"
-#~ "Hvis dit netværk bruger LDAP, NIS eller PDC Windows domæne-"
-#~ "autentificeringstjenester, vælg da den rigtige som '%s'. Hvis du ikke véd "
-#~ "hvilken der skal bruges, så bør du spørge din systemadministrator.\n"
-#~ "\n"
-#~ "Hvis du har problemer med at huske adgangskoder, så kan du vælge '%s' "
-#~ "hvis din maskine ikke vil være forbundet til Internettet, og du stoler på "
-#~ "alle som kan få adgang til maskinen. "
-
-#~ msgid ""
-#~ "This dialog allows you to fine tune your bootloader:\n"
-#~ "\n"
-#~ " * \"%s\": there are three choices for your bootloader:\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer GRUB (text menu).\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer LILO with its text menu interface.\n"
-#~ "\n"
-#~ "    * \"%s\": if you prefer LILO with its graphical interface.\n"
-#~ "\n"
-#~ " * \"%s\": in most cases, you will not change the default (\"%s\"), but "
-#~ "if\n"
-#~ "you prefer, the bootloader can be installed on the second hard drive\n"
-#~ "(\"%s\"), or even on a floppy disk (\"%s\");\n"
-#~ "\n"
-#~ " * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
-#~ "given to the user at the console to select a boot entry other than the\n"
-#~ "default.\n"
-#~ "\n"
-#~ " * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n"
-#~ "management, notably for laptops. If you know your hardware supports it "
-#~ "and\n"
-#~ "you need it, check this box.\n"
-#~ "\n"
-#~ " * \"%s\": If you noticed hardware problems on your machine (IRQ "
-#~ "conflicts,\n"
-#~ "instabilities, machine freeze, ...) you should try disabling APIC by\n"
-#~ "checking this box.\n"
-#~ "\n"
-#~ "!! Be aware that if you choose not to install a bootloader (by selecting\n"
-#~ "\"%s\"), you must ensure that you have a way to boot your Mandriva Linux\n"
-#~ "system! Be sure you know what you are doing before changing any of the\n"
-#~ "options. !!\n"
-#~ "\n"
-#~ "Clicking the \"%s\" button in this dialog will offer advanced options "
-#~ "which\n"
-#~ "are normally reserved for the expert user."
-#~ msgstr ""
-#~ "Denne dialog giver dig mulighed for at finindstille din "
-#~ "opstartsindlæser:\n"
-#~ "\n"
-#~ " * '%s': der er tre muligheder for din opstartsindlæser:\n"
-#~ "\n"
-#~ "   * '%s': hvis du foretrækker GRUB (tekstmenu).\n"
-#~ "\n"
-#~ "   * '%s': hvis du foretrækker LILO med tekstgrænseflade.\n"
-#~ "\n"
-#~ "   * '%s': hvis du foretrækker LILO med grafikgrænseflade.\n"
-#~ "\n"
-#~ " * '%s': I de fleste tilfælde vil det ikke være nødvendigt at ændre "
-#~ "standard ('%s'), men hvis du foretrækker det, kan opstartsindlæseren "
-#~ "installeres på diskdrev nummer to ('%s'), eller endda på en diskette ('%"
-#~ "s').\n"
-#~ "\n"
-#~ " * '%s': Efter opstart eller genstart af maskinen er dette den tid der "
-#~ "gives til brugeren på konsollen til at vælge en anden opstartsindgang end "
-#~ "den forvalgte.\n"
-#~ "\n"
-#~ " * \"%s\": ACPI er en ny standard (kom frem i år 2002) for strømstyring, "
-#~ "især for bærbare. Hvis du véd at dit udstyr understøtter dettte, og du "
-#~ "har brug for det, så afkryds denne boks.\n"
-#~ "\n"
-#~ " * \"%s\": Hvis du bemærkede udstyrsproblemer på din maskine (IRQ-"
-#~ "konflikter, ustabilitet, maskinen fryser ...) bør du prøve at deaktivere "
-#~ "APIC ved at afkrydse denne boks.\n"
-#~ "\n"
-#~ "Vær opmærksom på at hvis du vælger ikke at installere en opstartsindlæser "
-#~ "(ved at vælge '%s'), skal du være sikker på at du har en anden måde at "
-#~ "starte dit Mandriva Linux-system op på! Vær sikker på hvad du gør hvis du "
-#~ "ændrer nogen af tilvalgene her!\n"
-#~ "\n"
-#~ "Et klik på '%s'-knappen i denne dialog vil tilbyde avancerede muligheder "
-#~ "beregnet til ekspertbrugeren."
-
-#~ msgid "GRUB"
-#~ msgstr "GRUB"
-
-#~ msgid "/dev/hda"
-#~ msgstr "/dev/hda"
-
-#~ msgid "/dev/hdb"
-#~ msgstr "/dev/hdb"
-
-#~ msgid "/dev/fd0"
-#~ msgstr "/dev/fd0"
-
-#~ msgid "Delay before booting the default image"
-#~ msgstr "Ventetid før opstart af forvalgt styresystem"
-
-#~ msgid ""
-#~ "After you have configured the general bootloader parameters, the list of\n"
-#~ "boot options that will be available at boot time will be displayed.\n"
-#~ "\n"
-#~ "If there are other operating systems installed on your machine they will\n"
-#~ "automatically be added to the boot menu. You can fine-tune the existing\n"
-#~ "options by clicking \"%s\" to create a new entry; selecting an entry and\n"
-#~ "clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
-#~ "changes.\n"
-#~ "\n"
-#~ "You may also not want to give access to these other operating systems to\n"
-#~ "anyone who goes to the console and reboots the machine. You can delete "
-#~ "the\n"
-#~ "corresponding entries for the operating systems to remove them from the\n"
-#~ "bootloader menu, but you will need a boot disk in order to boot those "
-#~ "other\n"
-#~ "operating systems!"
-#~ msgstr ""
-#~ "Efter du har konfigureret de generelle parametre for opstartsindlæseren, "
-#~ "vil listen med opstartsmuligheder, som vil være tilgængeligt ved "
-#~ "opstarten, blive vist.\n"
-#~ "\n"
-#~ "Hvis der er andre operativsystemer installeret på din maskine, vil de "
-#~ "automatisk blive tilføjet til opstartsmenuen. Du kan finjustere de "
-#~ "eksisterende muligheder ved at klikke '%s' for at oprette en ny indgang; "
-#~ "vælg en indgang og klik på '%s' eller '%s' for at ændre eller fjerne den. "
-#~ "'%s' bekræfter dine ændringer.\n"
-#~ "\n"
-#~ "Måske vil du ikke ønske at givea dgang til disse andre operativsystemer "
-#~ "til nogensomhelst, som har adgang til konsollen og genstarter maskinen. "
-#~ "Du kan slette de tilsvarende indgange til operativsystemerne for at "
-#~ "fjerne dem fra opstartsindlæserens menu, men du vil så have brug for en "
-#~ "opstartsdiskette for at kunne starte disse andre operativsystemer op!"
-
-#~ msgid ""
-#~ "LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n"
-#~ "automated. DrakX will analyze the disk boot sector and act according to\n"
-#~ "what it finds there:\n"
-#~ "\n"
-#~ " * if a Windows boot sector is found, it will replace it with a GRUB/"
-#~ "LILO\n"
-#~ "boot sector. This way you will be able to load either GNU/Linux or any\n"
-#~ "other OS installed on your machine.\n"
-#~ "\n"
-#~ " * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
-#~ "one.\n"
-#~ "\n"
-#~ "If it cannot make a determination, DrakX will ask you where to place the\n"
-#~ "bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n"
-#~ "will not install any bootloader. Use it only if you know what you are "
-#~ "doing."
-#~ msgstr ""
-#~ "LILO og grub er opstartsindlæsere for GNU/Linux. Normalt er dette trin\n"
-#~ "helt automatisk. DrakX vil analysere opstartssektoren på disken og\n"
-#~ "handle ud fra det som findes der.\n"
-#~ "\n"
-#~ " * Hvis en opstartssektor for Windows bliver fundet, vil den erstatte "
-#~ "denne med\n"
-#~ "en GRUB- eller LILO-opstartsektor. På denne måde kan du indlæse enten\n"
-#~ "GNU/Linux eller ethvert andet operativsystem installeret på din maskine.\n"
-#~ "\n"
-#~ " * Hvis en opstartsektor for grub eller LILO bliver fundet, vil den blive "
-#~ "erstattet med en ny.\n"
-#~ "\n"
-#~ "Hvis det ikke er mulig at afgøre dette automatisk, vil DrakX spørge dig "
-#~ "hvor opstartsindlæseren skal installeres. Generelt er '%s' det sikreste "
-#~ "sted. Valg af '%s' vil ikke installere nogen opstartsindlæser. Brug kun "
-#~ "dette hvis du véd hvad du gør."
-
-#~ msgid ""
-#~ "Now, it's time to select a printing system for your computer. Other OSs "
-#~ "may\n"
-#~ "offer you one, but Mandriva Linux offers two. Each of the printing "
-#~ "systems\n"
-#~ "is best suited to particular types of configuration.\n"
-#~ "\n"
-#~ " * \"%s\" -- which is an acronym for ``print, do not queue'', is the "
-#~ "choice\n"
-#~ "if you have a direct connection to your printer, you want to be able to\n"
-#~ "panic out of printer jams, and you do not have networked printers. (\"%s"
-#~ "\"\n"
-#~ "will handle only very simple network cases and is somewhat slow when "
-#~ "used\n"
-#~ "with networks.) It's recommended that you use \"pdq\" if this is your "
-#~ "first\n"
-#~ "experience with GNU/Linux.\n"
-#~ "\n"
-#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
-#~ "printing to your local printer or to one halfway around the planet. It "
-#~ "is\n"
-#~ "simple to configure and can act as a server or a client for the ancient\n"
-#~ "\"lpd \" printing system, so it is compatible with older operating "
-#~ "systems\n"
-#~ "which may still need print services. While quite powerful, the basic "
-#~ "setup\n"
-#~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
-#~ "make\n"
-#~ "sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
-#~ "front-ends for printing or choosing printer options and for managing the\n"
-#~ "printer.\n"
-#~ "\n"
-#~ "If you make a choice now, and later find that you do not like your "
-#~ "printing\n"
-#~ "system you may change it by running PrinterDrake from the Mandrake "
-#~ "Control\n"
-#~ "Center and clicking the expert button."
-#~ msgstr ""
-#~ "Nu er det tid til at vælge et udskrivningssystem for din maskine. Andre "
-#~ "styresystemer tilbyder måske ét, men Mandrake tilbyder to. "
-#~ "Printersystemerne er hver især bedst til en bestemt konfigurationstype.\n"
-#~ "\n"
-#~ " * '%s' - som betyder 'print, do not queue' (udskriv, kø ej), er valget, "
-#~ "hvis du har en direkte forbindelse til din printer, og du ønsker at kunne "
-#~ "klare printproblemer med det samme, og du ikke har nogen printere via "
-#~ "netværk. ('%s' vil kun behandle meget simple netværkstilfælde, og er lidt "
-#~ "sløvt på netværk.) Det anbefales at du bruger 'pdq' hvis dette er din "
-#~ "første erfaring med GNU/Linux.\n"
-#~ "\n"
-#~ " * '%s' - 'Common Unix Printing System' (Fælles printersystem for Unix) "
-#~ "er fremragende til at udskrive på din lokale printer, og også på den, der "
-#~ "står på den anden side af jordkloden. Det er nemt at konfigurere, og kan "
-#~ "virke som en server eller klient for det bedagede 'lpd'-printsystem, så "
-#~ "det er kompatibelt med ældre styresystemer, som stadig kan have brug for "
-#~ "udskriftstjenester. Det er ganske stærkt, men den basale opsætning er "
-#~ "næsten lige så nem som for 'pdq'. Hvis du har brug for at dette "
-#~ "efterligner en 'lpd'-server, skal du aktivere 'cups-lpd'-dæmonen. '%s' "
-#~ "har grafiske grænseflader for udskrivning og valg af printermuligheder, "
-#~ "og for administration af printeren.\n"
-#~ "\n"
-#~ "Hvis du laver et valg nu og senere finder ud af at du ikke kan lide dit "
-#~ "udskriftssystem, kan du ændre det ved at køre PrinterDrake fra Mandrakes "
-#~ "Kontrolcenter, og klikke på ekspert-knappen."
-
-#~ msgid ""
-#~ "You can add additional entries in yaboot for other operating systems,\n"
-#~ "alternate kernels, or for an emergency boot image.\n"
-#~ "\n"
-#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
-#~ "partition.\n"
-#~ "\n"
-#~ "For Linux, there are a few possible options:\n"
-#~ "\n"
-#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
-#~ "select this boot option.\n"
-#~ "\n"
-#~ " * Image: this is the name of the kernel to boot. Typically, vmlinux or "
-#~ "a\n"
-#~ "variation of vmlinux with an extension.\n"
-#~ "\n"
-#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-#~ "\n"
-#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
-#~ "assist in initializing video hardware, or to enable keyboard mouse "
-#~ "button\n"
-#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
-#~ "mouse.\n"
-#~ "The following are some examples:\n"
-#~ "\n"
-#~ "   \t      video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-#~ "hda=autotune\n"
-#~ "\n"
-#~ "   \t      video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-#~ "\n"
-#~ " * Initrd: this option can be used either to load initial modules before\n"
-#~ "the boot device is available, or to load a ramdisk image for an "
-#~ "emergency\n"
-#~ "boot situation.\n"
-#~ "\n"
-#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
-#~ "you\n"
-#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
-#~ "ramdisk larger than the default.\n"
-#~ "\n"
-#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
-#~ "read-only, to allow a file system check before the system becomes "
-#~ "``live''.\n"
-#~ "You can override the default with this option.\n"
-#~ "\n"
-#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-#~ "problematic, you can select this option to boot in ``novideo'' mode, "
-#~ "with\n"
-#~ "native frame buffer support.\n"
-#~ "\n"
-#~ " * Default: selects this entry as being the default Linux selection,\n"
-#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
-#~ "be\n"
-#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
-#~ msgstr ""
-#~ "Du kan tilføje flere valgmuligheder i Yaboot, til andre styresystemer, "
-#~ "andre kerner, eller til nød-opstart.\n"
-#~ "\n"
-#~ "For andre styresystemer består indgangen blot af et navn og "
-#~ "rodpartitionen\n"
-#~ "\n"
-#~ "For Linux er der nogen få valgmuligheder:\n"
-#~ "\n"
-#~ " * Label: dette er navnet som du skal indtaste til ledeteksten fra Yaboot "
-#~ "for at vælge denne opstartsmulighed.\n"
-#~ "\n"
-#~ " * Image: Dette er navnet på den kerne der skal opstartes. Typisk vmlinux "
-#~ "eller en variation på vmlinux med en endelse.\n"
-#~ "\n"
-#~ " * Root: 'root'-enheden eller \"/\" for din Linux installation.\n"
-#~ "\n"
-#~ " * Append: på Apple udstyr bruges kerne-append muligheden ofte til at "
-#~ "hjælpe med initialisering af billedudstyr, eller til at aktivere "
-#~ "emulering af museknapper for de manglende knap-2 og knap-3 på musen på en "
-#~ "typisk Apple mus. Det følgende er nogle eksempler:\n"
-#~ "\n"
-#~ "         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-#~ "hda=autotune\n"
-#~ "\n"
-#~ "         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-#~ "\n"
-#~ " * Initrd: denne mulighed kan bruges enten til at indlæse de første "
-#~ "moduler, før opstartsenheden er tilgængelig, eller til at indlæse en "
-#~ "ramdisk ved opstart i en nødsituation.\n"
-#~ "\n"
-#~ " * Initrd-size: den almindelige størrelse på en ramdisk er generelt 4.096 "
-#~ "kbyte. Hvis du har brug for at udlægge en stor ramdisk kan denne mulighed "
-#~ "bruges til at angive en ramdisk større end standarden.\n"
-#~ "\n"
-#~ " * Read-write: normalt bliver 'root'-partitionen først monteret "
-#~ "skrivebeskyttet for at muliggøre et filsystemstjek før systemet går i "
-#~ "luften. Du kan tilsidesætte denne standard med denne valgmulighed.\n"
-#~ "\n"
-#~ " * NoVideo: skulle Apple-billedudstyret vise sig at være specielt "
-#~ "problemfyldt kan du vælge denne mulighed for at starte op i 'novideo'-"
-#~ "tilstand, med indbygget rammebufferunderstøttelse.\n"
-#~ "\n"
-#~ " * Default: vælger denne indgang som værende det normale Linux valg, som "
-#~ "vælges ved at trykke RETUR ved yaboots ledetekst. Denne indgang vil også "
-#~ "blive fremhævet med en '*', hvis du trykker Tab for at se opstartsvalgene."
-
-#~ msgid ""
-#~ "Yaboot is a bootloader for NewWorld Macintosh hardware and can be used "
-#~ "to\n"
-#~ "boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are "
-#~ "correctly\n"
-#~ "detected and installed in the bootloader menu. If this is not the case, "
-#~ "you\n"
-#~ "can add an entry by hand in this screen. Take care to choose the correct\n"
-#~ "parameters.\n"
-#~ "\n"
-#~ "Yaboot's main options are:\n"
-#~ "\n"
-#~ " * Init Message: a simple text message displayed before the boot prompt.\n"
-#~ "\n"
-#~ " * Boot Device: indicates where you want to place the information "
-#~ "required\n"
-#~ "to boot to GNU/Linux. Generally, you set up a bootstrap partition "
-#~ "earlier\n"
-#~ "to hold this information.\n"
-#~ "\n"
-#~ " * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-#~ "yaboot. The first delay is measured in seconds and at this point, you "
-#~ "can\n"
-#~ "choose between CD, OF boot, MacOS or Linux;\n"
-#~ "\n"
-#~ " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-#~ "After selecting Linux, you will have this delay in 0.1 second increments\n"
-#~ "before your default kernel description is selected;\n"
-#~ "\n"
-#~ " * Enable CD Boot?: checking this option allows you to choose ``C'' for "
-#~ "CD\n"
-#~ "at the first boot prompt.\n"
-#~ "\n"
-#~ " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-#~ "Open Firmware at the first boot prompt.\n"
-#~ "\n"
-#~ " * Default OS: you can select which OS will boot by default when the "
-#~ "Open\n"
-#~ "Firmware Delay expires."
-#~ msgstr ""
-#~ "Yaboot er en systemopstarter til NewWorld MacIntosh-maskinel. Den kan "
-#~ "starte enten GNU/Linux, MacOS eller MacOSX. Sædvanligvis vil MacOS and "
-#~ "MacOSX blive korrekt opdaget og installeret i opstartindlæsermenuen. Hvis "
-#~ "dette ikke skulle være tilfældet kan du her tilføje en indgang i hånden. "
-#~ "Vær omhyggelig med at vælge de korrekte parametre.\n"
-#~ "\n"
-#~ "Yaboots hovedvalg er:\n"
-#~ "\n"
-#~ "  * Init-besked: En enkel tekstbesked som vises før valg af opstart.\n"
-#~ "\n"
-#~ "  * Opstartsenhed: Angiver hvor du ønsker at placere informationen som er "
-#~ "nødvendig for at starte GNU/Linux op. Du vil generelt have indstillet en "
-#~ "bootstrap-partition tidligere til at indeholde denne information.\n"
-#~ "\n"
-#~ "  * Open firmwareforsinkelse: Til forskel fra LILO er der to forsinkelser "
-#~ "mulige med yaboot. Den første forsinkelse bliver målt i sekunder og du "
-#~ "kan ved det punkt vælge mellem CD, OF-opstart, MacOS eller Linux.\n"
-#~ "\n"
-#~ "  * Ventetid før kerneopstart: Denne ligner LILO-opstartsforsinkelsen. "
-#~ "Efter at have valgt Linux vil du have denne ventetid gange 0,1 sekunder "
-#~ "før din forvalgte kernebeskrivelse bliver valgt.\n"
-#~ "\n"
-#~ "  * Aktivér CD-opstart?: Hvis du vælger dette valg vil  du kunne trykke "
-#~ "'C' for CD ved det første opstartsvalg.\n"
-#~ "\n"
-#~ "  * Aktiver OF-opstart?: Hvis du vælger dette valg vil du kunne trykke "
-#~ "'N' for 'Open Firmware' ved det første opstartsvalg.\n"
-#~ "\n"
-#~ "  * Forvalgt styresystem: Du kan vælge hvilket forvalgt styresystem der "
-#~ "skal startes når Open Firmwareforsinkelsen er udløbet."
-
-#~ msgid ""
-#~ "\"%s\": if a sound card is detected on your system, it is displayed "
-#~ "here.\n"
-#~ "If you notice the sound card displayed is not the one that is actually\n"
-#~ "present on your system, you can click on the button and choose another\n"
-#~ "driver."
-#~ msgstr ""
-#~ "'%s': Hvis et lydkort er blevet fundet på dit system, vil det blive vist "
-#~ "her. Hvis du bemærker at det viste lydkort ikke er det som faktisk er til "
-#~ "stede på systemet, kan du klikke på knappen og vælge en anden driver."
-
-#~ msgid ""
-#~ "As a review, DrakX will present a summary of information it has about "
-#~ "your\n"
-#~ "system. Depending on your installed hardware, you may have some or all "
-#~ "of\n"
-#~ "the following entries. Each entry is made up of the configuration item "
-#~ "to\n"
-#~ "be configured, followed by a quick summary of the current configuration.\n"
-#~ "Click on the corresponding \"%s\" button to change that.\n"
-#~ "\n"
-#~ " * \"%s\": check the current keyboard map configuration and change it if\n"
-#~ "necessary.\n"
-#~ "\n"
-#~ " * \"%s\": check the current country selection. If you are not in this\n"
-#~ "country, click on the \"%s\" button and choose another one. If your "
-#~ "country\n"
-#~ "is not in the first list shown, click the \"%s\" button to get the "
-#~ "complete\n"
-#~ "country list.\n"
-#~ "\n"
-#~ " * \"%s\": By default, DrakX deduces your time zone based on the country\n"
-#~ "you have chosen. You can click on the \"%s\" button here if this is not\n"
-#~ "correct.\n"
-#~ "\n"
-#~ " * \"%s\": check the current mouse configuration and click on the button "
-#~ "to\n"
-#~ "change it if necessary.\n"
-#~ "\n"
-#~ " * \"%s\": clicking on the \"%s\" button will open the printer\n"
-#~ "configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-#~ "Guide'' for more information on how to setup a new printer. The "
-#~ "interface\n"
-#~ "presented there is similar to the one used during installation.\n"
-#~ "\n"
-#~ " * \"%s\": if a sound card is detected on your system, it is displayed\n"
-#~ "here. If you notice the sound card displayed is not the one that is\n"
-#~ "actually present on your system, you can click on the button and choose\n"
-#~ "another driver.\n"
-#~ "\n"
-#~ " * \"%s\": by default, DrakX configures your graphical interface in\n"
-#~ "\"800x600\" or \"1024x768\" resolution. If that does not suit you, click "
-#~ "on\n"
-#~ "\"%s\" to reconfigure your graphical interface.\n"
-#~ "\n"
-#~ " * \"%s\": if a TV card is detected on your system, it is displayed "
-#~ "here.\n"
-#~ "If you have a TV card and it is not detected, click on \"%s\" to try to\n"
-#~ "configure it manually.\n"
-#~ "\n"
-#~ " * \"%s\": if an ISDN card is detected on your system, it will be "
-#~ "displayed\n"
-#~ "here. You can click on \"%s\" to change the parameters associated with "
-#~ "the\n"
-#~ "card.\n"
-#~ "\n"
-#~ " * \"%s\": If you wish to configure your Internet or local network "
-#~ "access\n"
-#~ "now.\n"
-#~ "\n"
-#~ " * \"%s\": this entry allows you to redefine the security level as set in "
-#~ "a\n"
-#~ "previous step ().\n"
-#~ "\n"
-#~ " * \"%s\": if you plan to connect your machine to the Internet, it's a "
-#~ "good\n"
-#~ "idea to protect yourself from intrusions by setting up a firewall. "
-#~ "Consult\n"
-#~ "the corresponding section of the ``Starter Guide'' for details about\n"
-#~ "firewall settings.\n"
-#~ "\n"
-#~ " * \"%s\": if you wish to change your bootloader configuration, click "
-#~ "that\n"
-#~ "button. This should be reserved to advanced users.\n"
-#~ "\n"
-#~ " * \"%s\": here you'll be able to fine control which services will be "
-#~ "run\n"
-#~ "on your machine. If you plan to use this machine as a server it's a good\n"
-#~ "idea to review this setup."
-#~ msgstr ""
-#~ "Som en opsummering vil DrakX give dig en oversigt over information som "
-#~ "den har om dit system. Afhængig af installeret maskinel kan du have et "
-#~ "eller flere af de følgende punkter. Hvert punkt består af en overskrift "
-#~ "fulgt af en kort opsummering af den nuværende konfiguration. Klik på den "
-#~ "tilsvarende \"%s\"-knap for at ændre på opsætningen.\n"
-#~ "\n"
-#~ " * \"%s\": Tjek at din tastaturopsætning er korrekt og ændr om "
-#~ "nødvendigt.\n"
-#~ "\n"
-#~ " * \"%s\": Tjek det nuværende valg af land. Hvis du ikke er i dette land, "
-#~ "så klik på \"%s\"-knappen og vælg et andet land. Hvis dit land ikke er i "
-#~ "listen, så klik på \"%s\"-knappen for at få en fuldstændig liste over "
-#~ "lande.\n"
-#~ "\n"
-#~ " ' \"%s\": Som standard bestemmer DrakX din tidszone ud fra hvilket land "
-#~ "du har valgt. Du kan klikke på \"%s\" her, hvis dette ikke er korrekt.\n"
-#~ "\n"
-#~ " * \"%s\" :Tjek den nuværende museopsætning og klik på knappen for at "
-#~ "ændre om nødvendigt.\n"
-#~ "\n"
-#~ " * \"%s\": Ved at klikke på \"%s\"-knappen åbnes printeropsætnings-\n"
-#~ "hjælperen. Konsultér det tilhørende kapitel i begynderguiden for mere\n"
-#~ "information om hvordan en printer kan sættes op. Grænsefladen som er "
-#~ "vist\n"
-#~ "dér er magen til den som benyttes under installationen.\n"
-#~ "\n"
-#~ " * '%s': Hvis et lydkort er blevet fundet på dit system, vil det blive "
-#~ "vist hér. Hvis du bemærker at det viste lydkort ikke er det som faktisk "
-#~ "er til stede på systemet, kan du klikke på knappen og vælge en anden "
-#~ "driver.\n"
-#~ "\n"
-#~ " * \"%s\": Som standard vil DrakX opsætte din grafiske grænseflade i "
-#~ "opløsningen 800x600 eller 1024x768. Hvis det ikke passer til dine behov, "
-#~ "så klik på '%s'-knappen for at ændre på opsætningen.\n"
-#~ "\n"
-#~ " * \"%s\": Hvis et TV-kort er fundet i din maskine, er det vist her. Hvis "
-#~ "du haret TV-kort som ikke er fundet, så klik på \"%s\" for at sætte det "
-#~ "op manuelt.\n"
-#~ "\n"
-#~ " * \"%s\": Hvis der er fundet et ISDN-kort, vil det vises her. Du kan "
-#~ "klikke på \"%s\" for at ændre på parameterne til kortet.\n"
-#~ "\n"
-#~ " * \"%s\": Hvis du ønsker at konfigurere din adgang til internet eller "
-#~ "lokalnet nu.\n"
-#~ "\n"
-#~ " * \"%s\": Du kan her ændre på sikkerhedsniveauet som defineret i et "
-#~ "tidligere trin.\n"
-#~ "\n"
-#~ " * \"%s\": Hvis du skal koble din maskine direkte til internet, er det en "
-#~ "god idé at beskytte sig mod indtrængning med en brandmur. Kig i det "
-#~ "tilsvarende afsnit i Begyndervejledningen for detaljer om opsætning af "
-#~ "brandmur.\n"
-#~ "\n"
-#~ " * \"%s\": ivis du vil ændre på konfigurationen for opstartsindlæseren, "
-#~ "så klik på denne knap. Dette bør forbeholdes avancerede brugere.\n"
-#~ "\n"
-#~ " * \"%s\": her kan du fininstille hvilke tjenester som skal startes på "
-#~ "din maskine. Hvis du skal bruge maskinen som server er det en god idé at "
-#~ "gennemse denne opsætning."
-
-#~ msgid ""
-#~ "No ethernet network adapter has been detected on your system.\n"
-#~ "I cannot set up this connection type."
-#~ msgstr ""
-#~ "Der blev ikke fundet nogen ethernet netværksadapter på dit system.\n"
-#~ "Kan ikke sætte denne forbindelsetype op."
-
-#~ msgid ""
-#~ "Please choose which network adapter you want to use to connect to "
-#~ "Internet."
-#~ msgstr ""
-#~ "Vælg hvilken netværksadapter du ønsker at bruge til at lave forbindelse "
-#~ "til Internettet med."
-
-#~ msgid ""
-#~ "To submit a bug report, click on the button report.\n"
-#~ "This will open  a web browser window on %s\n"
-#~ " where you'll find a form to fill in.  The information displayed above "
-#~ "will be \n"
-#~ "transferred to that server."
-#~ msgstr ""
-#~ "For at indsende en fejlrapport klik da på rapport-knappen.\n"
-#~ "Dette vil åbne et vindue i en netlæser på %s\n"
-#~ " hvor du vil finde en formular der kan udfyldes. Informationen vist "
-#~ "ovenfor vil blive overført til den server."
-
-#~ msgid ""
-#~ "To submit a bug report, click the report button, which will open your "
-#~ "default browser\n"
-#~ "to Anthill where you will be able to upload the above information as a "
-#~ "bug report."
-#~ msgstr ""
-#~ "For at indsende en fejlrapport klik da på rapport-knappen, hvilket vil "
-#~ "åbne din foretrukne netlæser for Anthill,  hvor du vil kunne indlægge "
-#~ "informationen vist ovenfor som en fejlrapport."
-
-#~ msgid ""
-#~ "Here, you can setup the security level and administrator of your "
-#~ "machine.\n"
-#~ "\n"
-#~ "\n"
-#~ "The Security Administrator is the one who will receive security alerts if "
-#~ "the\n"
-#~ "'Security Alerts' option is set. It can be a username or an email.\n"
-#~ "\n"
-#~ "\n"
-#~ "The Security Level menu allows you to select one of the six preconfigured "
-#~ "security levels\n"
-#~ "provided with msec. These levels range from poor security and ease of "
-#~ "use, to\n"
-#~ "paranoid config, suitable for very sensitive server applications:\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-#~ "very\n"
-#~ "easy to use security level. It should only be used for machines not "
-#~ "connected to\n"
-#~ "any network and that are not accessible to everybody.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-#~ "security\n"
-#~ "recommended for a computer that will be used to connect to the Internet "
-#~ "as a\n"
-#~ "client.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">High</span>: There are already some\n"
-#~ "restrictions, and more automatic checks are run every night.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-#~ "enough\n"
-#~ "to use the system as a server which can accept connections from many "
-#~ "clients. If\n"
-#~ "your machine is only a client on the Internet, you should choose a lower "
-#~ "level.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-#~ "previous\n"
-#~ "level, but the system is entirely closed and security features are at "
-#~ "their\n"
-#~ "maximum"
-#~ msgstr ""
-#~ "Her kan du opsætte sikkerhedsniveauet og -administrator for din maskine\n"
-#~ "\n"
-#~ "\n"
-#~ "Sikkerhedsadministratoren er den som vil modtage sikkerhedspåmindelser, \n"
-#~ "hvis muligheden 'Sikkerhedspåmindelser' er aktiveret. Det kan være et \n"
-#~ "brugernavn eller en epostadresse.\n"
-#~ "\n"
-#~ "\n"
-#~ "Menuen for sikkerhedsniveau tillader at vælge et af de seks "
-#~ "prækonfigurerede \n"
-#~ "sikkerhedsniveauer som leveres af msec. Disse niveauer spænder fra "
-#~ "dårlig \n"
-#~ "sikkerhed og nem brug til en paranoid konfigurering, der er passende til "
-#~ "meget\n"
-#~ "følsomme server-opsætninger:\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Dårlig</span>: Dette er et totalt "
-#~ "usikkert men \n"
-#~ "meget nemt at anvende sikkerhedsniveau. Det bør kun bruges af maskiner "
-#~ "der \n"
-#~ "ikke er forbundet til noget netværk, og som ikke er tilgængeligt for "
-#~ "enhver.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Standard</span>: Dette er standard "
-#~ "sikkerheden \n"
-#~ "anbefalet for en maskine som vil blive brugt til opkobling på internettet "
-#~ "som klient.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Høj</span>: Der er allerede en del "
-#~ "begrænsninger, og flere automatiske kontroller vil bliver kørt hver nat.\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Højere</span>: Sikkerheden er nu høj nok "
-#~ "til at \n"
-#~ "bruge systemet som en server som kan tage imod forbindelser fra mange "
-#~ "klienter. \n"
-#~ "Hvis din maskine kun er en klient på internettet, bør du vælge et lavere "
-#~ "niveau.\n"
-#~ "\n"
-#~ "\n"
-#~ "<span foreground=\"royalblue3\">Paranoid</span>: Dette ligner det \n"
-#~ "foregående niveau, men systemet er helt lukket og\n"
-#~ "sikkerhedsfaciliteter er på deres højeste"
-
-#~ msgid "chunk size"
-#~ msgstr "fragmentstørrelse"
-
-#~ msgid "mkraid failed (maybe raidtools are missing?)"
-#~ msgstr "mkraid fejlede (måske mangler raidtools?)"
-
-#~ msgid "mkraid failed"
-#~ msgstr "mkraid fejlede"
-
-#~ msgid "<b>Mandrake Control Center</b>"
-#~ msgstr "<b>Mandrake Kontrolcenter</b>"
-
-#~ msgid ""
-#~ "The Mandrake Control Center is an essential collection of Mandrake-"
-#~ "specific utilities for simplifying the configuration of your computer."
-#~ msgstr ""
-#~ "Mandrake Kontrolcenter er en essentiel samling af Mandrake-specifikke "
-#~ "værktøjer til at forenkle konfigurationen af din maskine,"
-
-#~ msgid ""
-#~ "Find all Mandriva products and services at <b>MandrakeStore</b> -- our "
-#~ "full service e-commerce platform."
-#~ msgstr ""
-#~ "Find alle Mandriva-produkter og -tjenester på <b>MandrakeStore</b> -- vor "
-#~ "fuldstændige e-handelsplatform."
-
-#~ msgid "Become a <b>MandrakeClub</b> member!"
-#~ msgstr "Bliv medlem af <b>MandrakeClub</b>!"
-
-#~ msgid ""
-#~ "Take advantage of valuable benefits, products and services by joining "
-#~ "MandrakeClub, such as:"
-#~ msgstr ""
-#~ "Drag nytte af værdifulde fordele, produkter og tjenester ved at være med "
-#~ "i Mandriva Club, med:"
-
-#~ msgid ""
-#~ "\t* Special download mirror list exclusively for MandrakeClub Members"
-#~ msgstr ""
-#~ "\t* Speciel liste over filhentningsspejle, udelukkende for MandrakeClub-"
-#~ "medlemmer"
-
-#~ msgid "\t* Special discounts for products and services at MandrakeStore"
-#~ msgstr "\t* Specielle rabatter for produkter og tjenester hos MandrakeStore"
-
-#~ msgid ""
-#~ "\t* Find out Mandriva Linux on a bootable CD with <b>Mandriva Move</b>"
-#~ msgstr ""
-#~ "\t* Find ud af mere om vor Mandriva Linux på en opstartelig CD med "
-#~ "Mandriva Move"
-
-#~ msgid ""
-#~ "Find all Mandriva products at <b>MandrakeStore</b> -- our full service e-"
-#~ "commerce platform."
-#~ msgstr ""
-#~ "Find alle Mandriva-produkter hos <b>MandrakeStore</b> - vores "
-#~ "fuldstændige e-handelplatform."
-
-#~ msgid "<b>Become a MandrakeClub member!</b>"
-#~ msgstr "<b>Bliv medlem af MandrakeClub!</b>"
-
-#~ msgid ""
-#~ "In the Mandriva Linux menu you will find easy-to-use applications for all "
-#~ "tasks:"
-#~ msgstr ""
-#~ "I Mandriva Linux-menuen vil du finde nemme applikationer for alle opgaver:"
-
-#~ msgid ""
-#~ "\t* Take charge of your personal data with the integrated personal "
-#~ "information suites: <b>Kontact</b> and <b>Evolution</b>"
-#~ msgstr ""
-#~ "\t* Tag kontrol over dine personlige data med de integrerede, personlige "
-#~ "informationssuiter: <b>Kontact</b> og <b>Evolution</b>"
-
-#~ msgid ""
-#~ "\t* <b>XEmacs</b>: open source text editor and application development "
-#~ "system"
-#~ msgstr ""
-#~ "\t - <b>XEmacs</b>: tekstredigering og applikationsudviklingssystem som "
-#~ "frit programmel"
-
-#~ msgid ""
-#~ "\t* <b>Vim</b>: advanced text editor with more features than standard Vi"
-#~ msgstr ""
-#~ "\t* <b>Vim</b>: avanceret tekstredigering med flere faciliteter end "
-#~ "standard Vi"
-
-#~ msgid ""
-#~ "[OPTIONS] [PROGRAM_NAME]\n"
-#~ "\n"
-#~ "OPTIONS:\n"
-#~ "  --help            - print this help message.\n"
-#~ "  --report          - program should be one of mandrake tools\n"
-#~ "  --incident        - program should be one of mandrake tools"
-#~ msgstr ""
-#~ "[VALGMULIGHEDER] [PROGRAM-NAVN]\n"
-#~ "\n"
-#~ "VALGMULIGHEDER:\n"
-#~ "  --help            - udskriv denne hjælpebesked.\n"
-#~ "  --report          - program bær være én af Mandrakes værktøjer\n"
-#~ "  --incident        - program bær være én af Mandrakes værktøjer"
-
-#~ msgid ""
-#~ "This interface has not been configured yet.\n"
-#~ "Run the \"Add an interface\" assistant from the Mandrake Control Center"
-#~ msgstr ""
-#~ "Dette grænsesnit er ikke blevet konfigureret endnu.\n"
-#~ "Kør 'Tilføj et grænsesnit'-hjælperen fra Mandrake Kontrolcentret"
-
-#~ msgid "The alert wizard had unexpectly failled:"
-#~ msgstr "Advarselshjælperen fejlede uventet:"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Tilslutning mislykkedes.\n"
-#~ "Kontrollér konfigurationen i Mandrakes kontrolcentral."
-
-#~ msgid "The package %s is needed. Install it?"
-#~ msgstr "Pakken %s kræves. Ønsker du at installere den?"
-
-#~ msgid "ignore"
-#~ msgstr "ignorér"
-
-#~ msgid "no"
-#~ msgstr "nej"
-
-#~ msgid "yes"
-#~ msgstr "ja"
-
-#~ msgid "SILO Installation"
-#~ msgstr "SILO-installering"
-
-#~ msgid "First sector of boot partition"
-#~ msgstr "Første sektor af opstartspartition"
-
-#~ msgid "Bootloader installation"
-#~ msgstr "Systemopstarterens installation"
-
-#~ msgid "SILO"
-#~ msgstr "SILO"
-
-#~ msgid "Alcatel speedtouch usb"
-#~ msgstr "Alcatel speedtouch usb"
-
-#~ msgid "Sagem (using pppoa) usb"
-#~ msgstr "Sagem (der bruger pppoa) usb"
-
-#~ msgid ""
-#~ "Enter a Zeroconf host name which will be the one that your machine will "
-#~ "get back to other machines on the network:"
-#~ msgstr ""
-#~ "Indtast et Zeroconf-værtsnavn, som vil være det som din maskine vil give "
-#~ "tilbage til andre maskiner på netværket:"
-
-#~ msgid "Harddrake2 version %s"
-#~ msgstr "Harddrake2 version %s"
-
-#~ msgid "transmitted"
-#~ msgstr "transmitteret"
-
-#~ msgid "received"
-#~ msgstr "modtaget"
-
-#~ msgid ""
-#~ "You can export using NFS or SMB. Please select which you'd like to use."
-#~ msgstr "Du kan eksportere med NFS eller SMB. Hvilken vil du bruge"
-
-#~ msgid ""
-#~ "You can export using NFS or Samba. Please select which you'd like to use."
-#~ msgstr "Du kan eksportere med NFS eller Samba. Hvilken vil du bruge"
-
-#~ msgid "The package %s is going to be removed."
-#~ msgstr "pakkeN %s vil blive afinstalleret."
-
-#~ msgid "You must be root to read configuration file. \n"
-#~ msgstr "Du skal være root for at læse konfigurationsfilen.\n"
-
-#~ msgid "Can not open %s!"
-#~ msgstr "Kan ikke åbne %s!"
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Dit kort kan have 3D acceleration, men kun med Xorg %s.\n"
-#~ "Dit kort er understøttet af Xorg %s som kan have bedre understøttelse i "
-#~ "2D."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s,\n"
-#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Dit kort kan have 3D acceleration understøttelse, men kun med Xorg %s.\n"
-#~ "VIGTIGT: Dette er eksperimentelt og kan få din maskine til at låse eller "
-#~ "gå ned.\n"
-#~ "Dit kort er understøttet af Xorg %s som kan have bedre understøttelse i "
-#~ "2D."
-
-#~ msgid "Xpmac (installation display driver)"
-#~ msgstr "Xpmac (installations-skærmdriver)"
-
-#~ msgid "4 billion colors (32 bits)"
-#~ msgstr "4 milliarder farver (32 bit)"
-
-#~ msgid "XFree86 server: %s\n"
-#~ msgstr "XFree86-server: %s\n"
-
-#~ msgid "Here is the full list of keyboards available"
-#~ msgstr "Her er den komplette liste over tilgængelige tastaturer"
-
-#~ msgid "Please insert the Boot floppy used in drive %s"
-#~ msgstr "Indsæt opstartsdisketten i diskette-drevet %s"
-
-#~ msgid "TCP/IP"
-#~ msgstr "TCP/IP"
-
-#~ msgid "Wireless"
-#~ msgstr "Trådløs"
-
-#~ msgid ""
-#~ "Due to incompatibilities of the 2.6 series kernel with the LSB runtime\n"
-#~ "tests, the 2.4 series kernel will be installed as the default to insure\n"
-#~ "compliance under the \"LSB\" group selection."
-#~ msgstr ""
-#~ "På grund af kerne 2.6-seriens inkompatibiliteter med LSB runtime test, så "
-#~ "vil 2.4-serien af kernen blive installeret som standard for at sikre at "
-#~ "systemet følger specifikationerne under \"LSB\"-gruppesektionen."
-
-#~ msgid "XawTV is not installed!"
-#~ msgstr "XawTV er ikke installeret!"
-
-#~ msgid "Provider dns 1 (optional)"
-#~ msgstr "Udbyder DNS 1 (valgfri)"
-
-#~ msgid "Provider dns 2 (optional)"
-#~ msgstr "Udbyder DNS 2 (valgfri)"
-
-#~ msgid "DHCP Client"
-#~ msgstr "DHCP-Klient"
-
-#~ msgid "Display"
-#~ msgstr "Vis"
-
-#~ msgid "Display configuration"
-#~ msgstr "Vís konfiguration"
-
-#~ msgid "Use tar and bzip2 (rather than tar and gzip)"
-#~ msgstr "Brug tar med bzip2 (i stedet for tar med gzip) "
-
-#~ msgid ""
-#~ "Change\n"
-#~ "Restore Path"
-#~ msgstr ""
-#~ "Ændr\n"
-#~ "Genskabelsessti"
-
-#~ msgid "European protocol"
-#~ msgstr "Europæisk protokol"
-
-#~ msgid "Found \"%s\" interface do you want to use it ?"
-#~ msgstr "Fandt \"%s\" grænsesnit, ønsker du at bruge det?"
-
-#~ msgid "Bewan USB modem"
-#~ msgstr "Bewan USB-modem"
-
-#~ msgid "ISDN configuration has not yet be ported to new wizard layer"
-#~ msgstr ""
-#~ "ISDN-konfiguration er endny ikke blevet flyttet til ny hjælperversion"
-
-#~ msgid "What kind is your ISDN connection?"
-#~ msgstr "Hvad slags type er din ISDN-forbindelse?"
-
-#~ msgid "Do you want to start a new configuration ?"
-#~ msgstr "Ønsker du at starte en ny konfiguration?"
-
-#~ msgid ""
-#~ "I have detected an ISDN PCI card, but I do not know its type. Please "
-#~ "select a PCI card on the next screen."
-#~ msgstr ""
-#~ "Jeg har opdaget et ISDN PCI-kort, men jeg ved ikke hvilken type. Vælg et "
-#~ "PCI-kort i næste skærmbillede."
-
-#~ msgid "No ISDN PCI card found. Please select one on the next screen."
-#~ msgstr "Ingen ISDN PCI-kort fundet. Vælg ét i næste skærmbillede."
-
-#~ msgid ""
-#~ "Please enter the name of the interface connected to the "
-#~ "internet.              \n"
-#~ "                \n"
-#~ "Examples:\n"
-#~ "                ppp+ for modem or DSL connections, \n"
-#~ "                eth0, or eth1 for cable connection, \n"
-#~ "                ippp+ for a isdn connection.\n"
-#~ msgstr ""
-#~ "Indtast venligst navnet på grænsefladen som er koblet på internettet.\n"
-#~ "\n"
-#~ "Eksempler:\n"
-#~ "                 ppp+ for modem- eller DSL-opkoblinger, \n"
-#~ "                 eth0 eller eth1 for kabelopkobling, \n"
-#~ "                 ppp+ for isdn-opkobling.\n"
-
-#~ msgid "DrakTermServ"
-#~ msgstr "DrakTermServ"
-
-#~ msgid "Under Devel ... please wait."
-#~ msgstr "Under udvikling ... vent venligst:-)"
-
-#~ msgid "Windows (FAT32)"
-#~ msgstr "Windows (FAT32)"
-
-#~ msgid ""
-#~ "This uses the same syntax as the command line program 'cdrecord'. "
-#~ "'cdrecord -scanbus' would also show you the device number."
-#~ msgstr ""
-#~ "Dette bruger den samme syntaks som kommandolinjeprogrammet 'cdrecord'. "
-#~ "'cdrecord scanbus' vil også vise dig enhedsnummeret."
-
-#~ msgid ""
-#~ "Enter your CD Writer device name\n"
-#~ " ex: 0,1,0"
-#~ msgstr ""
-#~ "Indtast din CD-brænders enhedsnavn\n"
-#~ " fx: 0,1,0"
-
-#~ msgid "Scientific Workstation"
-#~ msgstr "Videnskabelig arbejdsstation"
-
-#~ msgid "Scientific applications such as gnuplot"
-#~ msgstr "Videnskabelige programmer såsom gnuplot"
-
-#~ msgid "No wireless network adapter on your system!"
-#~ msgstr "Ikke nogen trådløs netværksadapter i dit system!"
-
-#~ msgid "Can not create log file!"
-#~ msgstr "Kan ikke oprette logfil!"
-
-#~ msgid "dhcp"
-#~ msgstr "dhcp"
-
-#~ msgid "Please select media for backup..."
-#~ msgstr "Vælg medie for sikkerhedskopi..."
-
-#~ msgid "real_file"
-#~ msgstr "real_file"
-
-#~ msgid "Configuration of a remote printer"
-#~ msgstr "Konfiguration af en ekstern printer"
-
-#~ msgid "configure %s"
-#~ msgstr "konfigurér %s"
-
-#~ msgid "protocol = "
-#~ msgstr "protocol = "
-
-#~ msgid "level = "
-#~ msgstr "level = "
-
-#~ msgid "Gnome Workstation"
-#~ msgstr "Gnome-arbejdsstation"
-
-#~ msgid "add"
-#~ msgstr "tilføj"
-
-#~ msgid "edit"
-#~ msgstr "redigér"
-
-#~ msgid "remove"
-#~ msgstr "fjern"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
deleted file mode 100644
index fb5c52abd..000000000
--- a/perl-install/share/po/de.po
+++ /dev/null
@@ -1,27195 +0,0 @@
-# translation of de.po to
-# translation of de.po to deutsch
-# translation of DrakX-de.po to deutsch
-# translation of de.po to Deutsch
-# translation of DrakX-de.po to german
-# german translation of the MandrivaInstaller.
-# Copyright (C) 2000-2003 Mandriva S.A.
-# Stefan Siegel <siegel@linux-mandrake.com>, 2000, 2001, 2002, 2003.
-# Sebastian Deutscher <sebastian_deutscher@web.de>, 2003,2004.
-# Gerhard Ortner <gerhard.ortner@aon.at>, 2003, 2004.
-# Roy Steuber <roysteuber@mittweida-net.de>, 2004.
-# Marcus Fischer <i18n@marcusfischer.com>, 2004.
-# Frank Köster <frank@dueppel13.de>, 2004, 2005.
-# Ronny Standtke <Ronny.Standtke@gmx.de>, 2003, 2004.
-# Ronny Standtke <Ronny.Standtke@gmx.net>, 2004, 2005.
-# Nicolas Bauer <webmaster@mandrakeusers.de>, 2005.
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX-de\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2005-04-18 23:28+0200\n"
-"Last-Translator: Frank Köster <frank@dueppel13.de>\n"
-"Language-Team: deutsch\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.10\n"
-
-#: ../move/move.pm:292
-#, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Welchen USB Key wollen Sie formatieren?"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-"Sie wollen das USB-Gerät „%s“ formatieren. Das wird alle darauf befindlichen "
-"Daten löschen.\n"
-"Stellen Sie sicher, dass das ausgewählte Gerät der USB-Key ist, den Sie "
-"formatieren möchten.\n"
-"Wir raten Ihnen, alle anderen USB-Speicher-Geräte während dieser Operation "
-"abzuziehen."
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr "USB-Stick ist nicht beschreibbar"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-"Der Schreibschutz des USB-Sticks scheint aktiv zu sein. Deaktivieren Sie \n"
-"den Schreibschutz und stecken Sie den USB-Stick wieder rein."
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Wiederholen"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr "Ohne USB-Stick fortfahren"
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-"Der Schreibschutz des USB-Sticks scheint aktiv zu sein, aber das sichere\n"
-"Entfernen ist jetzt nicht möglich.\n"
-"\n"
-"\n"
-"Starten Sie den Rechner neu, entfernen Sie den USB-Stick, deaktivieren Sie\n"
-"den Schreibschutz und starten Sie Mandriva Move erneut."
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Neustart"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Ihr USB-Stick enthält keine gültige Windows(FAT)-Partition.\n"
-"Wir brauchen eine um fortzufahren (Das ist immer gut, da \n"
-"Sie dann auf Windows-Rechnern auf Ihre Daten zugreifen\n"
-"können). Bitte stecken Sie einen USB-Stick ein, der statt-\n"
-"dessen eine Windows-Partition enthält.\n"
-"\n"
-"\n"
-"Sie können auch ohne einen USB-Stick weitermachen - \n"
-"Sie können dann Mandriva Move immernoch als normales\n"
-"Mandriva Betriebssystem nutzen."
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-"Es wurde kein USB-Stick an Ihrem System gefunden.\n"
-"Wenn Sie jetzt einen USB-Stick anschließen, kann\n"
-"Mandriva Move transparent die Daten in Ihrem Persönlichen\n"
-"Verzeichnis und die systemweite Konfiguration speichern.\n"
-"Diese stehen dann beim nächsten Booten zur Verfügung.\n"
-"Wenn Sie jetzt einen USB-Stick anschließen, warten Sie bitte\n"
-"mehrere Sekunden, bevor sie die Erkennung nochmals\n"
-"starten.\n"
-"Sie können auch ohne einen USB-Stick weitermachen - \n"
-"Sie können dann Mandriva Move immernoch als normales\n"
-"Mandriva Betriebssystem nutzen."
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr "Brauche einen USB-Stick, um Ihre Daten zu speichern"
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr "Nochmal nach USB-Stick suchen"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Setting up USB key"
-msgstr "USB-Stick einrichten"
-
-#: ../move/move.pm:517
-#, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "Bitte warten, schreibe Systemkonfiguration auf den USB-Stick..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-"Geben Sie Ihre Benutzer-Information ein, das Passwort wird für den "
-"Bildschirmschoner benutzt"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Auto configuration"
-msgstr "Automatische Konfiguration"
-
-#: ../move/move.pm:556
-#, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Bitte warten, erkenne und konfiguriere Geräte..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Fehler"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Es trat ein Fehler auf. Ich weiß jedoch nicht, wie ich damit sinnvoll \n"
-"umgehen soll. Sie können fortfahren, jedoch auf eigenes Risiko!"
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Ein Fehler ist aufgetreten"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-"Ein Fehler ist aufgetreten:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"Das kann durch defekte System-Konfigurations-Dateien\n"
-"auf dem USB-Stick passieren. Entfernen Sie die Dateien\n"
-"und starten Sie Mandriva Move neu. Um das zu machen,\n"
-"klicken Sie auf die entsprechende Schaltfläche.\n"
-"\n"
-"\n"
-"Sie können auch neu starten und den USB-Stick entfernen,\n"
-"oder den Inhalt unter einem anderen OS untersuchen, oder\n"
-"sogar die Log-Dateien in den Konsolen #3 und #4 einsehen,\n"
-"um Schlussfolgerungen zu ziehen."
-
-#: ../move/move.pm:681
-#, c-format
-msgid "Remove system config files"
-msgstr "System-Konfigurations-Dateien entfernen"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr "Einfach neustarten"
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr "Sie können nur ohne CD-ROM-Unterstützung fortfahren"
-
-#: ../move/tree/mdk_totem:71
-#, c-format
-msgid "Kill those programs"
-msgstr "Diese Programme beenden"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr "Keine CDROM-Unterstützung"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Lesen Sie bitte aufmerksam!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-"Sie können kein anderes CDROM verwenden, wenn die folgenden Programme "
-"laufen: \n"
-"%s"
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr "Kopiere in den Speicher damit Sie die CDROM entfernen können"
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 KB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 KB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB oder mehr"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X-Server"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Wählen Sie einen X-Server"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Multi-Monitor-Konfiguration"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Ihr System unterstützt die gleichzeitige Verwendung mehrerer Monitore.\n"
-"Was wollen Sie machen?"
-
-#: Xconfig/card.pm:262
-#, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Kann Xorg Paket nicht installieren:  %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Wählen Sie die Speichergröße Ihrer Grafikkarte"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Xorg konfigurieren"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Welche Xorg-Konfiguration wollen Sie verwenden?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Alle Monitore getrennt konfigurieren"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Xinerama-Erweiterung verwenden"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Nur Karte „%s“ (%s) konfigurieren"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s mit 3D-Hardwarebeschleunigung"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "Ihre Grafikkarte kann mit Xorg %s 3D-hardwarebeschleunigt werden."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s mit EXPERIMENTELLER 3D-Hardwarebeschleunigung"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Ihre Karte kann 3D-hardwarebeschleunigt werden, allerdings nur mit \n"
-"Xorg %s. BEMERKUNG: DIESE FUNKTION IST NOCH IM EXPERIMENTIER-\n"
-"STADIUM UND KANN ZUM STEHENBLEIBEN IHRES RECHNERS FÜHREN."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Benutzerdefiniert"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Verlassen"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Grafikkarte"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Auflösung"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Test"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Optionen"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr "Ihre Xorg-Konfigurationsdatei ist kaputt und wird ignoriert."
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Die Änderungen beibehalten?\n"
-"Momentan wäre dies:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Wählen Sie Ihren Monitor #%d"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Wählen Sie Ihren Monitor"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n'Play"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Generisch"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Hersteller"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Das Plug'n'Play-Testen schlug fehl. Bitte wählen Sie einen Monitor."
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die beiden kritischen Parameter sind die vertikale Wiederholfrequenz\n"
-"(wie oft der gesamte Bildschirm neu angezeigt wird) und insbesondere die\n"
-"horizontale Synchronisationsfrequenz (wie oft Scanlinien angezeigt werden).\n"
-"Es ist SEHR WICHTIG, dass Sie keinen Monitortyp mit einer falschen \n"
-"Synchronisationsrate auswählen, da Sie sonst Ihren Monitor beschädigen \n"
-"könnten. Im Zweifelsfall wählen Sie bitte eine konservativere \n"
-"Einstellung."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontale Wiederholfrequenz"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikale Wiederholfrequenz"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 Farben (8 Bit)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32.000 Farben (15 Bit)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65.000 Farben (16 Bit)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 Millionen Farben (24 Bit)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Auflösungen"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Andere"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Wählen Sie bitte Auflösung und Farbtiefe"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafikkarte: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "OK"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Abbrechen"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Hilfe"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Prüfen der Einstellungen"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Möchten Sie die vorgenommenen Einstellungen prüfen?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Warnung: Testen dieser Grafikkarte kann Ihren Rechner anhalten"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Es trat ein Fehler auf:\n"
-"%s\n"
-"Versuchen Sie, einen Parameter zu ändern."
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Abbruch in %d Sekunden"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Ist dies die richtige Einstellung?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Tastaturtyp: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Maustyp: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Maus-Gerät: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor Horiz. Frequenz: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor Vert. Frequenz: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafikkarte: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Grafikkartenspeicher: %s KB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Farbtiefe: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Auflösung: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg-Treiber: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Grafikumgebung zur Startzeit"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Ich kann GNU/Linux so einrichten, dass bei jedem Systemstart\n"
-"automatisch die grafische Oberfläche (= der X-Server) aktiviert wird.\n"
-"Wollen Sie, dass X nach jedem Neustart direkt zur Verfügung steht?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Ihre Grafikkarte scheint einen TV-Ausgang zu haben, der mittels Frame-Buffer "
-"angesprochen werden kann.\n"
-"\n"
-"Wenn Sie das wünschen, schließen Sie bitte Ihren Fernseher an die "
-"Grafikkarte an, bevor Sie den Rechner neu starten.\n"
-"Wählen Sie „TV-Ausgang“ im Bootloader.\n"
-"\n"
-"Haben Sie einen solchen Ausgang und wollen Sie ihn verwenden?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Um welche Fernsehnorm handelt es sich?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr "andere"
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Bitte warten"
-
-#: any.pm:143
-#, c-format
-msgid "Bootloader installation in progress"
-msgstr "Installation des Bootloaders ..."
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-"LILO möchte dem Laufwerk %s eine neue Datenträger-ID zuweisen. Jedoch ist\n"
-"das Ändern der Datenträger-ID einer Windows NT, 2000, oder XP Startplatte\n"
-"ein fataler Windows-Fehler.\n"
-"Dies trifft nicht für Windows 95, 98, oder NT Datenplatten zu.\n"
-"\n"
-"Neue Datenträger-ID zuweisen?"
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr ""
-"Die Installation des Betriebssytemstarters schlug fehl. Folgender Fehler "
-"trat auf:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Sie müssen Ihr Open-Firmware-Boot-Gerät anpassen, dass es den \n"
-"Betriebssytemstarter erkennt. Falls Sie beim Neustart nicht die \n"
-"Eingabeaufforderung des Betriebssytemstarters sehen, drücken Sie \n"
-"Strg-Option-O-F und geben Sie folgendes ein:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-"Tippen Sie dann: shut-down\n"
-"Beim darauffolgenden Neustart sollte Sie die Eingabeaufforderung sehen."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Sie haben sich entschieden, Ihren Bootloader auf eine Partition\n"
-"zu installieren. Das impliziert, dass Sie einen anderen Bootloader im Master-"
-"Boot-Record haben (etwa System Commander).\n"
-"\n"
-"Von welchem Laufwerk wollen Sie booten?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Erster Sektor der Platte (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Erster Sektor der Root-Partition"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Auf Diskette"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Überspringen"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/Grub-Installation"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Wo soll der Bootloader installiert werden?"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Konfiguration der Boot-Einstellungen"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Haupt-Optionen des Bootloaders"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Geben Sie die RAM-Größe in MB an"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Die Option „Gebrauch der Kommandozeilen-Parameter einschränken“ ist ohne \n"
-"Angabe eines Passwortes wirkungslos."
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Die Passwörter stimmen nicht überein"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Bitte versuchen Sie es erneut"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Zu verwendender Bootloader"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Boot-Gerät"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Wartezeit vor dem Starten des Betriebssystems"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "ACPI aktivieren"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr "„Kein APIC“ erzwingen"
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr "„Kein lokales APIC“ erzwingen"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Passwort"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Passwort (erneut)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Gebrauch der Kommandozeilen-Parameter einschränken"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "einschränken"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr " „/tmp“ bei jedem Systemstart säubern"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Genaue RAM-Größe, falls nötig (%d MB gefunden)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Init-Nachricht"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open-Firmware-Verzögerung"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Kernel-Start-Wartezeit"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Booten von CD erlauben?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Open-Firmware-Start erlauben?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "Standard-OS?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Abbild"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Root"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Übergeben"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Video-Modus"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Init-RamDisk"
-
-#: any.pm:372
-#, c-format
-msgid "Network profile"
-msgstr "Netzwerk Profil"
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Bezeichnung"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Standard"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Größe der Init-RamDisk"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Leere Einträge sind nicht erlaubt"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Sie müssen ein Kernel-Image angeben"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Sie müssen die Root-Partition festlegen"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Dieser Eintrag existiert bereits"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Welche Art Eintrag wollen Sie hinzufügen?"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Anderes OS (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Anderes OS (MacOS ...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Anderes OS (Windows ...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Hier sind die verschiedenen Einträge.\n"
-"Sie können weitere hinzufügen oder existierende ändern."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "Zugriff auf X-Programme"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "Zugriff auf RPM-Werkzeuge"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "„su“ erlauben"
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "Zugriff auf Verwaltungsdateien"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "Zugriff auf Netzwerk-Werkzeuge"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "Zugriff auf Compilier-Werkzeuge"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s wurde bereits hinzugefügt)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Dieses Passwort ist zu einfach"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Bitte geben Sie einen Benutzernamen an"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Der Benutzername sollte nur aus Kleinbuchstaben, Ziffern, \n"
-"„-“ und „_“ bestehen"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Dieser Benutzername ist zu lang"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Dieser Benutzername existiert bereits"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Benutzer hinzufügen"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Benutzer einrichten\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Fertig"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Benutzer akzeptieren"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Vollständiger Name"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, c-format
-msgid "Login name"
-msgstr "Benutzername"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Shell"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Symbol"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Automatisch anmelden"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Ich kann Ihren Computer so einrichten, dass ein Benutzer automatisch "
-"angemeldet wird."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Möchten Sie diese Möglichkeit nutzen?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Ja"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Nein"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Wählen Sie den Standard-Nutzer:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Wählen Sie den Window-Manager, den Sie verwenden wollen:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Bitte wählen Sie die zu verwendende Sprache."
-
-#: any.pm:707
-#, c-format
-msgid "Language choice"
-msgstr "Sprachauswahl"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Mandriva Linux unterstützt verschiedene Sprachen. Wählen\n"
-"Sie die Sprachen, die Sie installieren wollen.Diese stehen Ihnen zur\n"
-"Verfügung, nachdem die Installation fertig ist und Sie einen Neustart\n"
-"durchgeführt haben."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Standardmäßig Unicode verwenden"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Alle Sprachen"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Staat / Region"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Bitte wählen Sie Ihren Staat."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hier ist die komplette Liste aller Staaten"
-
-#: any.pm:798
-#, c-format
-msgid "Other Countries"
-msgstr "Andere Länder"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Fortgeschritten"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr "Einagbe-Methode:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Keine"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Keine Freigaben"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Allen Benutzern erlauben"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Wollen Sie Benutzern erlaubern, Verzeichnisse freizugeben?\n"
-"Wenn Sie das erlauben, können die Anwender Verzeichnisse in Konqueror oder "
-"Nautilus im Kontextmenü des entsprechenden Verzeichnisses freigeben.\n"
-"\n"
-"Mit „Benutzerdefiniert“ können Sie eine Einstellung pro Benutzer vornehmen.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-"NFS: das traditionelle Unix-Dateisystem für Freigaben im Netz, mit weniger "
-"Unterstützung für Mac und Windows."
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-"SMB: ein Dateisystem für Freigaben im Netz von Windows, Mac OS X und vielen "
-"modernen Linux-Systemen verwendet"
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-"Sie können die Dateien mittels SMB oder NFS anbieten. Welche Variante wollen "
-"Sie?"
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "UserDrake starten"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Schließen"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Die Freigaben zwischen Benutzern regelt die Gruppe „fileshare“. \n"
-"Sie können UserDrake verwenden, um Benutzer in diese Gruppe aufzunehmen."
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Lokale Datei"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr "Chipkarte"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Windows-Domäne"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr "Active Directory mit SFU"
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr "Active Directory mit Winbind"
-
-#: authentication.pm:56
-#, c-format
-msgid "Local file:"
-msgstr "Lokale Datei:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-"Verwende lokal für alle Authentifizierungen und Informationen in lokalen "
-"Dateien"
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-"Richtet Ihren Rechner so ein, dass er LDAP für die Authentifizierung."
-"verwendet. LDAP führt bestimmte Informationen innerhalb Ihrer Organisation "
-"zusammen."
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-"Erlaubt es Ihnen, eine Gruppe von Rechnern in der gleichen NIS-Domäne mit "
-"einer gemeinsamen Passwort- und Gruppendatei laufen zu lassen."
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Windows-Domäne:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-"Winbind erlaubt dem System, in einer Windows-Domäne Informationen abzufragen "
-"und Benutzer zu authentifizieren."
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr "Active Directory mit SFU:"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-"Kerberos ist ein sicheres System zur Bereitstellung von Netzwerk-"
-"Authentifizierungs-Diensten."
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Active Directory mit Winbind:"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP-Authentifizierung"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP-Basis-Domäne"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP-Server"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "Einfach"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr "Sicherheitstyp (SASL/Kerberos)"
-
-#: authentication.pm:111 authentication.pm:149
-#, c-format
-msgid "Authentication Active Directory"
-msgstr "Authentifizierungsmethode für Active Directory"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Domäne"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Server"
-
-#: authentication.pm:115
-#, c-format
-msgid "LDAP users database"
-msgstr "LDAP Benutzer-Datenbank"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr "anonymes BIND verwenden"
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr "LDAP-Benutzer darf das Active Directory einsehen"
-
-#: authentication.pm:118
-#, c-format
-msgid "Password for user"
-msgstr "Benutzerpasswort"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Verschlüsselung"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "NIS-Authentifizierung"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS-Domäne"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS-Server"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Damit dies mit einem Windows 2000-Domänen-Controller funktioniert, muss der "
-"Administrator wahrscheinlich folgendes ausführen: „C:\\>net localgroup \"Pre-"
-"Windows 2000 Compatible Access\" everyone /add“. Anschließend muss der "
-"Server neu gestartet werden.\n"
-"Damit Sie Ihren Mandriva Linux-Rechner zur Windows™-Domäne hinzufügen "
-"können, benötigen Sie noch Benutzername und Passwort eines Domänen-"
-"Administrators.\n"
-"Sollte das Netzwerk noch nicht aktiv sein, wird DrakX nach der "
-"Netzwerkkonfiguration versuchen, sich in die Domäne zu integrieren.\n"
-"Sollte dies schief gehen, und die Domänenauthentifizierung funktioniert "
-"nicht, verwenden Sie nach der Installation von Mandriva Linux folgenden "
-"Befehl: „smbpasswd -j DOMÄNE -U BENUTZER%%PASSWORT“, wobei „DOMÄNE“ die "
-"Windows™-Domäne ist, „BENUTZER“ und „PASSWORT“ der Benutzername und das "
-"Passwort des Domänen-Administrators.\n"
-"Mit „wbinfo -t“ können Sie anschließend testen, ob die Anmeldung erfolgreich "
-"war."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Windows-Domänen-Authentifizierung"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Name des Domänen-Administrators"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Passwort des Domänen-Administrators"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr "ldmap zum Speichern von UID/SID verwenden"
-
-#: authentication.pm:157
-#, c-format
-msgid "Default Idmap "
-msgstr "Standard ldmap"
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr "Administratorpasswort und Netzwerk-Authentifizierungsmethode festlegen"
-
-#: authentication.pm:172
-#, c-format
-msgid "Set administrator (root) password"
-msgstr "Administratorpasswort setzen"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, c-format
-msgid "Authentication method"
-msgstr "Authentifizierungsmethode"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Kein Passwort"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Authentifizierung"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr ""
-"Ich kann kein Broadcast machen,\n"
-"da keine NIS-Domäne angegeben wurde."
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Willkommen zum Bootloader!\n"
-"\n"
-"Markieren Sie in obiger Liste ein Betriebssystem\n"
-"oder warten Sie auf das Starten des Standard-OS.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO mit grafischem Menü"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO mit Textmenü"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "Sie haben nicht genug Platz in „/boot“"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr ""
-"Sie können den Bootloader\n"
-"nicht auf einer %s Partition installieren!\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-"Ihere Bootloaderkonfiguration muss geändert werden, da sich Ihre "
-"Partitionsnummerierung geändert hat"
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-"Das Startabbild konnte nicht korrekt installiert werden. Rettungsmodus "
-"starten und „%s“ wählen."
-
-#: bootloader.pm:1437
-#, c-format
-msgid "Re-install Boot Loader"
-msgstr "BS-Starter neu installieren"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d Minuten"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 Minute"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d Sekunden"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "„kdesu“ fehlt!"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "„consolehelper“ fehlt!"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Österreich"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Australien"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Belgien"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brasilien"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Kanada"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Schweiz"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Costa Rica"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Tschechische Republik"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Deutschland"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Dänemark"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estland"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Spanien"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finnland"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Frankreich"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Griechenland"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Ungarn"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Irland"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Israel"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Italien"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Japan"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Niederlande"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Norwegen"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Neuseeland"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Polen"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portugal"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Russland"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Schweden"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slowakei"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Thailand"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Taiwan"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Südafrika"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Vereinigte Staaten von Amerika"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV ist ein Protokoll, dass es Ihnen erlaubt, Webserver-Verzeichnisse\n"
-"einzuhängen, sodass Sie diese wie bei lokalen Dateisystemen verwenden\n"
-"können (sofern der Webserver als WebDAV-Server eingerichtet wurde). \n"
-"Falls Sie Einhängepunkte für WebDAV hinzufügen wollen, wählen Sie\n"
-"„Neu“."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Neu"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Aushängen"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Einhängen"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Einhängepunkt"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Bitte geben Sie die WebDAV-Server-URL an"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Die URL muss mit „http://“ oder „https://“ beginnen!"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Server: "
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Einhängepunkt: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Optionen: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Bitte machen Sie erst eine Sicherheitskopie Ihrer Daten!"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Wenn Sie „aboot“ verwenden wollen, müssen Sie ausreichend Platz am Anfang \n"
-"der Platte lassen (2048 Sektoren reichen aus)."
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Assistent"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Wählen Sie eine Aktion"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Sie haben nur eine große FAT-Partition \n"
-"(diese enthält häufig nur Microsoft DOS/Windows).\n"
-"Ich rate Ihnen, diese Partition erst zu verkleinern\n"
-"(Wählen Sie sie an und drücken Sie dann „Größe ändern“)"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Bitte klicken Sie auf eine Partition"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Details"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Keine Festplatten gefunden"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalisierendes FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Leer"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Dateisystemtypen:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Stattdessen „%s“ verwenden"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Erzeugen"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Typ"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Löschen"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Verwenden Sie erst „Aushängen“"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Wählen Sie eine andere Partition"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Wählen Sie eine Partition"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Verlassen"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Rückgängig"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "In den Normal-Modus wechseln"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "In den Experten-Modus wechseln"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-"Sie sollten die Partition %s formatieren.\n"
-"Sonst wird kein Eintrag für den Mount-Punkt %s in fstab geschrieben.\n"
-"Trotzdem verlassen?"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Beenden ohne speichern"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Beenden ohne die Partitionstabelle zu speichern?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Möchten Sie die vorgenommenen Änderungen in „/etc/fstab“ speichern?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, um die Änderungen \n"
-"der Partitionstabelle wirksam werden zu lassen."
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Alles löschen"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Automatisches Erstellen"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Mehr"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Festplatten-Informationen"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Alle Primärpartitionen sind in Gebrauch"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Ich kann keinen weiteren Partitionen hinzufügen"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Um mehr Partitionen einrichten zu können, müssen Sie zunächst eine Partition "
-"löschen und anschließend eine erweiterte Partition erzeugen."
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr "Kein Supermount"
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr "Supermount"
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr "Supermount außer für CDROM Laufwerke"
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Partitionstabelle schreiben"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Partitionstabelle wiederherstellen"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Partitionstabelle retten"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Partitionstabelle neu laden"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Wechselmedien automatisch einhängen"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Datei auswählen"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Die gesicherte Partitionstabelle hat nicht dieselbe Größe.\n"
-"Soll trotzdem fortgefahren werden?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Ich versuche, die Partitionstabelle zu retten"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Ausführliche Informationen"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Größe ändern"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Formatieren"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Zum RAID hinzufügen"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Zum LVM hinzufügen"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Aus dem RAID löschen"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Aus dem LVM löschen"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "RAID modifizieren"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Als Loopback verwenden"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Eine neue Partition erzeugen"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Anfangssektor: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Größe in MB:"
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Dateisystemtyp: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Einstellung: "
-
-#: diskdrake/interactive.pm:526
-#, c-format
-msgid "Logical volume name "
-msgstr "Name für logisches Laufwerk"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"Sie können keine weiteren Partitionen anlegen (da Sie die maximale \n"
-"Anzahl primärer Partitionen erstellt haben). Bitte löschen Sie \n"
-"eine primäre Partition und legen Sie stattdessen eine erweiterte \n"
-"Partition an."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Die Loopback-Datei entfernen?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Änderung des Partitionstyps von %s, werden sämtliche Daten darauf "
-"gelöscht."
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Partitionstyp ändern"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Welches Dateisystem wollen Sie verwenden?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Konvertiere ext2 zu ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Wo wollen Sie die Loopback-Datei %s einhängen?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Wo wollen Sie das Gerät %s einhängen?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ich kann diesen Einhängepunkt nicht zurücksetzen, da diese Partition als \n"
-"Loopback verwendet wird. Bitte entfernen Sie erst diesen Loopback."
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Wo wollen Sie „%s“ einhängen?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Berechne die Größe neu"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Errechne die Grenzen des FAT-Dateisystems"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Die Größe dieser Partition ist nicht änderbar"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Sie sollten ein Backup sämtlicher Daten dieser Partition erstellen"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Durch Veränderung der Partitionsgröße von %s, gehen sämtliche Daten darauf "
-"verloren."
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Wählen Sie die neue Größe"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Neue Größe in MB:"
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-"Um nach der Größenänderung der Partition(en) die Datenintegrität\n"
-"zu gewährleisten, wird Windows™ beim nächsten Hochfahren eine\n"
-"Dateisystemprüfung durchführen."
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Wählen Sie einen vorhandenen RAID"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "neu"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Wählen Sie einen vorhandenen LVM"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "LVM-Name?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Diese Partition kann nicht als Loopback verwendet werden"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Name der Loopback-Datei: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Dateinamen angeben"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-"Diese Datei wird bereits von einer anderen Loopback-Verknüpfung verwendet, "
-"wählen Sie eine andere Datei."
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Datei existiert bereits. Soll ich sie verwenden?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Einhänge-Optionen"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Verschiedene"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "Gerät"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "Ebene"
-
-#: diskdrake/interactive.pm:1023
-#, c-format
-msgid "chunk size in KiB"
-msgstr "Blockgröße in KiB"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Vorsicht:!! Diese Aktion ist gefährlich."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Welcher Partitionstyp?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr ""
-"Sie müssen Ihren Rechner neu starten, damit die Veränderungen wirksam werden."
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Die Partitionstabelle der Platte „%s“ wird gespeichert!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Nach Formatieren der Partition %s, werden sämtliche Daten darauf gelöscht."
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Dateien auf die neue Partition verschieben"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Dateien verstecken"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Das Verzeichnis „%s“ enthält bereits Daten\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Verschiebe Dateien auf die neue Partition"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Kopiere %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Entferne %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "die Partition %s heißt nun %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr "Die Partitionen wurden neu nummeriert:"
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Gerät: "
-
-#: diskdrake/interactive.pm:1187
-#, c-format
-msgid "Devfs name: "
-msgstr "Devfs name: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr "Datenträger-Bezeichnung: "
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS Laufwerksbuchstabe: %s (vermutlich?)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Typ:"
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Name: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Anfang: Sektor %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Größe: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s Sektoren"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Zylinder %d bis %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Formatiert\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Nicht formatiert\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Eingehängt\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Loopback-Datei(en):\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Partition wird standardmäßig geladen\n"
-"    (für MS-DOS-Boot, nicht jedoch für LILO)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Ebene %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Blockgröße %d KiB\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-Platten %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Dateiname des Loopbacks: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Es handelt sich mit großer\n"
-"Wahrscheinlichkeit um eine\n"
-"Treiber-Partition. Sie sollten\n"
-"sie daher besser unverändert\n"
-"lassen.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Diese spezielle Start-Partition\n"
-"ist für die Verwendung mehrerer\n"
-"Betriebssysteme auf dem selben\n"
-"Rechner.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Nur lesbar"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Größe: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s Zylinder, %s Köpfe, %s Sektoren\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Info: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-Platten %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partitionstabellentyp: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "auf Kanal %d ID %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Dateisystem-Schlüssel"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Wählen Sie Ihren Dateisystem-Schlüssel (Passwort)"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Dieses Passwort ist zu einfach (es muss mindestens %d Zeichen lang sein)!"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Die Passwörter stimmen nicht überein"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Schlüssel"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Schlüssel (erneut)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, c-format
-msgid "Encryption algorithm"
-msgstr "Verschlüsselungsalgorythmus"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Typ ändern"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "Ich kann mich unter „%s“ nicht anmelden! Stimmt das Passwort?"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Domänen-Authentifizierung nötig"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Welchen Benutzernamen"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Anderer"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr "Bitte geben Sie Benutzername, Passwort und Domäne des Rechners an."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Benutzername"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Server suchen"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, c-format
-msgid "Search new servers"
-msgstr "Neue Server suchen"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Das Paket %s muss installiert sein. Soll ich es installieren?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Das zwingend benötigte Paket „%s“ fehlt."
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Installiere Pakete..."
-
-#: do_pkgs.pm:227
-#, c-format
-msgid "Removing packages..."
-msgstr "Entferne Pakete ..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Partition „%s“ einhängen"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "Das Einhängen der Partition %s in das Verzeichnis %s schlug fehl."
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Überprüfung von %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "Fehler beim Aushängen von %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Swap Partition „%s“ aktivieren"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatiere Partition „%s“"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Erzeugen und Formatieren der Datei %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr ""
-"Ich bin nicht in der Lage, %s mit einem Dateisystem vom Typ %s zu "
-"formatieren."
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatieren von %s schlug fehl"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-"Inode-Zugriffszeiten auf diesem System nicht aktualisieren\n"
-"(z.B. für schnellere Zugriffe auf den News-Spool um News-Server zu "
-"beschleunigen)."
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-"Kann nur explizit eingehängt werden (so wird\n"
-"etwa das Dateisystem nicht bei „-a“ eingehängt)."
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-"Interpretiere keine zeichen- oder speziellen blockorientierten Geräte auf "
-"dem Dateisystem."
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-"Verbiete die Ausführung jeglicher Binärdateien auf dem ein-\n"
-"gehängten Dateisystem. Diese Option ist nützlich für Server mit Datei-\n"
-"systemen, auf denen sich Binärdateien fremder Architekturen befinden. "
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-"Verhindere die Wirkung von gesetzen Benutzer- oder Gruppen-Identifier-\n"
-"Bits. (Dies scheint sicher, ist aber in faktisch unsicherer falls Sie\n"
-"suidperl(1) installiert haben.)"
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr "Das Dateisystem read only einhängen/mounten"
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr "Alle I/O-Operationen am Dateisystem sollten parallel gemacht werden."
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-"Einem normalen Benutzer das Einhängen des Dateisystem erlauben.\n"
-"Der Benutzername wird in mtab eingetragen, so dass er das Datei-\n"
-"system auch wieder aushängen kann.\n"
-"Diese Option beinhaltet die Optionen noexec, nosuid und nodec\n"
-"(solange nicht nachträglich durch eine der Optionen user, exec, dev \n"
-"oder suid überschrieben)."
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr "Schreib Zugriff für den normalen Benutzer"
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr "Schreib-Zugriff für den normalen Benutzer"
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr ""
-"Sie können JFS nicht für Partitionen verwenden, die kleiner als 16MB sind!"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Sie können ReiserFS nicht für Partitionen verwenden, die kleiner als 32MB "
-"sind!"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "mit „/usr“"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "Server"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Ich kann die Partitionstabelle von „%s“ nicht lesen. Sie scheint \n"
-"fehlerhaft zu sein :-(\n"
-"Ich kann fortfahren, indem ich die fehlerhaften Partitionen lösche \n"
-"(dabei gehen ALLE darauf vorhandenen DATEN VERLOREN!). Alternativ können \n"
-"Sie mir jedoch auch verbieten, die Partitionstabelle zu verändern.\n"
-"(Folgender Fehler trat auf: „%s“).\n"
-"\n"
-"Sind Sie einverstanden, dass ich die problematischen Partitionen lösche?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Einhängepunkte müssen mit einem / beginnen."
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"Einhängepunkte sollten nur Buchstaben, Ziffern und den Unterstrich "
-"unterhalten"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Es gibt bereits eine Partition, mit dem Einhängepunkt %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Sie haben eine Software-RAID-Partition als Wurzelverzeichnis (/)"
-"ausgewählt. \n"
-"Zur Zeit kann kein Bootloader damit ohne Verwendung einer \n"
-"„/boot“-Partition arbeiten. Stellen Sie sicher, dass Sie eine solche \n"
-"Partition erstellen."
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr ""
-"Sie können kein logisches LVM-Medium für den Einhängepunkt %s verwenden."
-
-#: fsedit.pm:409
-#, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Sie haben einen LVM-Datenträger als Wurzelverzeichnis (/)ausgewählt. \n"
-"Zur Zeit kann kein Bootloader damit ohne Verwendung einer \n"
-"„/boot“-Partition arbeiten. Stellen Sie sicher, dass Sie eine solche \n"
-"Partition erstellen."
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-"Sie werden nicht in der Lage sein, Lilo zu installieren (Lilo kann nicht mit "
-"LVs auf verschiedenen PVs umgehen)."
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Dieses Verzeichnis muss innerhalb des Wurzelverzeichnisses bleiben"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Sie benötigen ein echtes GNU/Linux-Dateisystem (ext2/ext3, reiserfs, xfs "
-"oder jfs) für diesen Einhängepunkt.\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-"Sie können kein verschlüsseltes Medium für den Einhängepunkt %s verwenden."
-
-# ../../diskdrak1
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-"Nicht genug freier Platz, damit ich selbst eine Partition anlegen kann."
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Nichts zu tun."
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Diskettenlaufwerke"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "ZIP"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Festplatten"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CD-ROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD-Brenner"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Bandlaufwerke"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Videokarten"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "TV-Karten"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Andere Multimedia-Geräte"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Soundkarten"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Webcam"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Prozessoren"
-
-#: harddrake/data.pm:209
-#, c-format
-msgid "ISDN adapters"
-msgstr "ISDN Karten"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Netzwerkkarten"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modem"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr "ADSL Adapter"
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Speicher"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "AGP-Controller"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Drucker"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Joystick"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA-Controller"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAID-Controller"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA-Controller"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire-Controller"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCIA-Controller"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-Controller"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "USB-Controller"
-
-#: harddrake/data.pm:421
-#, c-format
-msgid "USB ports"
-msgstr "USB-Ports"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-Controller"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Brücken und System-Controller"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Tastatur"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Maus"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "USV"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Scanner"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Unbekannt/Andere"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "CPU #"
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Einen Moment ... Ich richte die Konfiguration ein"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Kein alternativer Treiber"
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Es existiert kein alternativer OSS/ALSA-Treiber für Ihre Soundkarte (%s), "
-"die momentan „%s“ verwendet."
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Sound-Konfiguration"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Hier können Sie einen alternativen Treiber (entweder OSS oder ALSA) für Ihre "
-"Soundkarte (%s) auswählen"
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Ihre Karte verwendet momentan den %s „%s“ Treiber (Voreinstellung für Ihre "
-"Karte ist „%s“)"
-
-#: harddrake/sound.pm:243
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) war das erste Sound-API. Es handelt sich um eine "
-"betriebssystemunabhängige API (verfügbar auf den meisten UNIX™-Systemen), "
-"aber es ist nur sehr einfach und beschränkt in den Fähigkeiten.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) ist eine modularisierte "
-"Architektur, die \n"
-"eine große Anzahl an ISA-, USB und PCI-Karten unterstützt.\n"
-"Sie stellt außerdem eine wesentlich mächtigere API zur Verfügung als OSS\n"
-"Um ALSA zu nutzen können Sie:\n"
-"- die alte OSS-Kompatibilitäts-API\n"
-"- die neue ALSA-API mit den erweiterten Möglichkeiten. Diese verlangt "
-"allerdings das Nutzen der ALSA-Bilbliotheken.\n"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Treiber:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Fehlerbehandlung"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Warnung"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"Der alte „%s“ Treiber steht auf einer Schwarzen Liste.\n"
-"\n"
-"Der Treiber soll Fehlfunktionen verursachen.\n"
-"\n"
-"Der neue „%s“ Treiber steht nach einem Neustart zur Verfügung."
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Kein OpenSource-Treiber"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Es existiert kein freier Treiber für Ihre Soundkarte (%s), aber es gibt "
-"einen proprietären Treiber unter  „%s“."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Kein bekannter Treiber"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Es gibt keinen bekannten Treiber für Ihre Soundkarte (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Unbekannter Treiber"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Fehler: Es gibt keinen bekannten Treiber für Ihre Soundkarte (%s)"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Sound-Fehlerbehandlung"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"Der klassische Test, um Fehler im Sound-System zu finden:\n"
-"\n"
-"\n"
-"- „lspcidrake -v | fgrep AUDIO“ verrät Ihnen, welcher Treiber Ihre "
-"Soundkarte \n"
-"  standardmäßig verwendet.\n"
-"\n"
-"- „/sbin/chkconfig --list sound“ und „/sbin/chkconfig --list alsa“ verraten\n"
-"  Ihnen, ob die Sound- und ALSA-Dienste konfiguriert sind, um im\n"
-"  Initlevel 3 zu laufen.\n"
-"\n"
-"- „/sbin/fuser -v /dev/dsp“ verrät das Programm, das die Soundkarte "
-"benutzt.\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Lassen Sie mich irgendeinen Treiber auswählen"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr "Ich wähle einen willkürlichen Treiber"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Wenn Sie wirklich wissen, welcher Treiber der Richtige für Ihre Karte ist,\n"
-"wählen Sie einen aus der Liste aus.\n"
-"\n"
-"Der gerade verwendete Treiber für Ihre „%s“ Soundkarte ist „%s“ "
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Autoerkennung"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Unbekannt|Generisch"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Unbekannt|CPH05X (bt878) [Zahlreiche Hersteller]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Unbekannt|CPH06X (bt878) [Zahlreiche Hersteller]"
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Für die meisten modernen TV-Karten erkennt das bttv-Modul des Linux-Kernels "
-"automatisch die richtigen Parameter.\n"
-"Falls Ihre Karte falsch erkannt wird, können Sie Tuner- und Kartentyp hier "
-"einstellen. Geben Sie einfach die benötigten Parameter an."
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Kartentyp:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr "Tunertyp:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr "Anzahl der Aufnahmepuffer:"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "Anzahl der Puffer für MMAP-Aufnahmen"
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL-Einstellung:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Radiobetrieb:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "Radio Unterstützung aktivieren"
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"Lesen Sie bitte aufmerksam die Lizenz, bevor Sie fortfahren. Sie umfasst\n"
-"die gesamte Mandriva Linux Distribution. Sollten Sie nicht in allen Punkten\n"
-"zustimmen, betätigen Sie bitte die Schaltfläche „%s“, um die Installation\n"
-"abzubrechen. Um mit der Installation fortzufahren, betätigen Sie die\n"
-"Schaltfläche „%s“."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Akzeptieren"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"GNU/Linux ist ein Mehrbenutzer-System, das bedeutet konkret jedes\n"
-"Benutzerkennzeichen hat eigene Präferenzen (Grafische Umgebung,\n"
-"Programmeinstellungen, etc.), sowie ein eigenes Heim-Verzeichnis, in dem\n"
-"diese Einstellungen gespeichert werden. Falls Sie mehr wissen wollen,\n"
-"können Sie im „Starter Handbuch“ nachsehen. Sie können mehrere normale\n"
-"Benutzerkonten einrichten, im Gegensatz zum „privilegierten“ Kennzeichen:\n"
-"»root«, das einmalig ist. Im Gegensatz zu »root« können diese normalen\n"
-"Benutzer jedoch nur ihre eigenen Dateien und Konfigurationen verändern. Sie\n"
-"können sogar mehrere Benutzerkennzeichen pro Person einrichten, denen Sie\n"
-"Zugang zu Ihrem GNU/Linux-System gewähren wollen. Erstellen Sie sich ein\n"
-"eigenes Benutzerkennzeichen, auch wenn Sie der einzige Anwender sind, der\n"
-"diesen Rechner nutzt. Sie sollten nicht ständig mit dem privilegierten\n"
-"Kennzeichen arbeiten! Das ist ein hohes Sicherheitsrisiko! Wenn Sie einen\n"
-"schweren Fehler als einfacher Benutzer machen, dann können Sie maximal\n"
-"Daten verlieren, jedoch nicht Ihr gesamtes System unbrauchbar machen.\n"
-"\n"
-"Zuerst geben Sie bitte einen normalen Namen an. Das muss nicht\n"
-"notwendigerweise Ihr richtiger Name sein. „DrakX“ wird das erste Wort, das\n"
-"Sie eingegeben haben, in das Feld „%s“ eintragen. Dies ist der Name, den\n"
-"Sie zum Anmelden für dieses Kennzeichen benötigen. Natürlich können Sie ihn\n"
-"hier nach Belieben verändern. Dann geben Sie Ihrem Konto ein Passwort. Für\n"
-"ein Benutzerkennzeichen ist dieses zwar nicht von so herausragender\n"
-"Bedeutung wie das für »root«, doch Sie sollten trotzdem etwas Sorgfalt\n"
-"walten lassen. Immerhin sind es Ihre Daten ...\n"
-"\n"
-"Klicken Sie auf „%s“, um das Kennzeichen zu erstellen. Anschließend können\n"
-"Sie direkt weitere Benutzer hinzufügen. Wenn Sie alle Kennzeichen erstellt\n"
-"haben, klicken Sie auf „%s“.\n"
-"\n"
-"Durch Anwahl der Schaltfläche „%s“ haben Sie auch die Möglichkeit, die\n"
-"Standard-Shell dieses Benutzers ändern (normalerweise ist dies die „Bash“).\n"
-"\n"
-"Wenn Sie alle Kennzeichen erstellt haben, die Sie nutzen wollen, wird Ihnen\n"
-"die Möglichkeit eröffnet, ein Kennzeichen automatisch beim\n"
-"Betriebssystemstart angemeldet zu bekommen. Falls Sie sich für diese\n"
-"Funktionalität entscheiden (und wenig Wert auf Sicherheit legen) wählen Sie\n"
-"einfach die gewünschte Arbeitsumgebung und das Kennzeichen aus. Bestätigen\n"
-"Sie Ihre Auswahl durch betätigen der Schaltfläche „%s“. Andernfalls löschen\n"
-"Sie einfach die Markierung des Punktes „%s“."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Benutzername"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Weiter"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Sie erhalten die Liste, der auf Ihren Festplatten gefundenen GNU/Linux\n"
-"Partitionen. Sie können die Auswahl des Assistenten beibehalten - sie\n"
-"sollte normalerweise Ihren Bedürfnissen entsprechen. Falls Sie es vorziehen\n"
-"die Einhängpunkte selbst zu definieren, denken Sie bitte daran, dass Sie\n"
-"zumindest eine Verzeichnisbaumwurzel („/“) benötigen. Wählen Sie die\n"
-"Partitionen nicht zu klein, da Sie sonst nicht genügend Programme\n"
-"installieren können. Wenn Sie Ihre persönlichen Daten auf einer eigenen\n"
-"Partition halten wollen, legen Sie sich eine Partition namens „/home“ an.\n"
-"\n"
-"Die Partitionen werden folgendermaßen aufgelistet: „Name“, „Kapazität“.\n"
-"\n"
-"„Name“ hat folgende Struktur: „Festplattentyp“, „Festplattennummer“,\n"
-"„Partitionsnummer“ (etwa „hda1“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
-"„sd“, wenn es sich um eine SCSI-Platte handelt.\n"
-"\n"
-"„Festplattennummer“ ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
-"IDE-Platten bedeutet:\n"
-"\n"
-" * „a“ bedeutet „Master-Platte am primären IDE-Controller“;\n"
-"\n"
-" * „b“ bedeutet „Slave-Platte am primären IDE-Controller“;\n"
-"\n"
-" * „c“ bedeutet „Master-Platte am sekundären IDE-Controller“;\n"
-"\n"
-" * „d“ bedeutet „Slave-Platte am sekundären IDE-Controller“;\n"
-"\n"
-"Bei SCSI-Platten steht „a“ für „niedrigste SCSI-ID“, „b“ für\n"
-"„zweitniedrigste SCSI-ID“, etc."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Die Mandriva Linux-Distribution wird auf mehreren CD-ROMs ausgeliefert. Es\n"
-"kann daher vorkommen, dass DrakX Pakete von anderen, als der\n"
-"Installations-CD-ROM installieren will. In diesem Fall wird es die aktuelle\n"
-"CD auswerfen und nach einer anderen fragen. Wenn Sie dieses CD nicht haben,\n"
-"klicken Sie einfach auf „%s“. Die entsprechenden Pakete werden in dem Fall\n"
-"nicht installiert."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"Nun ist es Zeit sich zu entscheiden, welche Programme Sie auf Ihrem Rechner\n"
-"installieren wollen. Es gibt tausende von Paketen für Mandriva Linux, und\n"
-"Sie müssen sie nicht alle auswendig kennen.\n"
-"\n"
-"Die Pakete sind nach ihrer Verwendung in vier Kategorien eingeteilt. Sie\n"
-"können Pakete aus verschiedenen Kategorien nach Belieben mischen, sodass\n"
-"beispielsweise eine „Workstation“-Installation auch Bestandteile einer\n"
-"„Server“-Installation aufweisen kann.\n"
-"\n"
-" * „%s“: Falls Ihr Rechner als Arbeitsplatzrechner verwendet werden soll,\n"
-"markieren Sie eine oder mehrere Gruppen.\n"
-"\n"
-" * „%s“: Falls Sie mit Ihrem Rechner programmieren wollen, sollten Sie\n"
-"diese Gruppe markieren. Die spezielle Gruppe „LSB“ wird Ihr System\n"
-"möglichst eng an den Vorgaben der Linux Standard Base ausrichten.\n"
-"\n"
-"   Die Auswahl der „LSB“-Gruppe bewirkt auch, dass der Kernel „2.4“\n"
-"anstelle des standardmäßigen Kernel „2.6“ installiert wird, um die 100%%ige\n"
-"Einhaltung der-LSB-Bedingungen zu garantieren. Allerdings erhalten Sie auch\n"
-"ohne die Auswahl der „LSB“-Gruppe ein nahezu 100%%ig LSB-konformes System.\n"
-"\n"
-" * „%s“: Wenn Ihre Maschine ein Server werden soll, können Sie hier die\n"
-"wichtigsten Dienste auswählen, die auf Ihren Rechner installiert werden\n"
-"sollen.\n"
-"\n"
-" * „%s“: Wählen Sie hier Ihre bevorzugte grafische Arbeitsoberfläche. Wenn\n"
-"Sie eine grafische Oberfläche verwenden wollen, so müssen Sie hier\n"
-"zumindest eine Gruppe auswählen.\n"
-"\n"
-"Wenn Sie die Maus über eine Gruppe bewegen, erhalten Sie einen kurzen\n"
-"erklärenden Text über die Gruppe.\n"
-"\n"
-"Sie können auch die „%s“ markieren. Das macht Sinn, wenn Sie die Pakete\n"
-"genau kennen oder wenn Sie volle Kontrolle darüber haben wollen, was\n"
-"installiert werden soll.\n"
-"\n"
-"Haben Sie die Installation als „%s“ gestartet, können Sie die Markierungen\n"
-"aller Gruppen entfernen, um die Installation neuer Pakete zu vermeiden.\n"
-"Hierdurch werden nur bereits installierte Pakete aktualisiert oder\n"
-"repariert.\n"
-"\n"
-"Wenn Sie bei einer normalen Installation alle Gruppen de-markieren\n"
-"erscheint ein Dialog, der Ihnen verschiedene Optionen für eine\n"
-"Minimal-Installation anbietet:\n"
-"\n"
-" * „%s“ Installiert eine rudimentäre grafische Oberfläche;\n"
-"\n"
-" * „%s“ Installiert das Basissystem zuzüglich grundlegender Werkzeuge\n"
-"inklusive deren Dokumentation. Dies ist die sinnvollste Wahl für eine\n"
-"Serverinstallation.\n"
-"\n"
-" * „%s“ Sie erhalten eine komplett „nackte“ 65MB große\n"
-"GNU/Linux-Distribution. Es versteht sich von selbst, dass das nur eine\n"
-"Kommandozeileninstallation sein kann."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Arbeitsplatzrechner"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Entwicklung"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Grafische Arbeitsoberfläche"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Individuelle Paketauswahl"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Aktualisierung"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Mit X"
-
-#: help.pm:146
-#, c-format
-msgid "With basic documentation"
-msgstr "Mit minimaler Dokumentation (Empfohlen)"
-
-#: help.pm:146
-#, c-format
-msgid "Truly minimal install"
-msgstr "Minimal-Installation"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"Falls Sie sich für die einzelne Paketauswahl entschieden haben erhalten Sie "
-"eine\n"
-"Baumliste aller Pakete, nach Gruppen und Untergruppen klassifiziert. Beim\n"
-"Durchstöbern des Baums können Sie Gruppen, Untergruppen oder einzelne "
-"Pakete\n"
-"auswählen.\n"
-"\n"
-"Wenn Sie ein Paket auswählen, erscheint rechts eine kurze Beschreibung.\n"
-"\n"
-"!! Es kommt vor, dass Server- und Dienst-Pakete angewählt wurden - entweder\n"
-"absichtlich, oder als Paket einer ganzen Gruppe; sollte das der Fall sein,\n"
-"werden Sie nun gefragt, ob Sie diese wirklich installiert haben wollen.\n"
-"Unter Mandriva Linux werden installierte Server und Dienste automatisch "
-"beim\n"
-"Betriebssystemstart gestartet. Selbst wenn zum Zeitpunkt, als die\n"
-"Distribution zusammengestellt wurde, keine Sicherheitslücken oder Fehler in\n"
-"diesen Paketen bekannt waren, ist natürlich nicht auszuschließen, dass\n"
-"später solche Fehler gefunden werden. Sollten Sie also nicht wissen, wovon\n"
-"hier die Rede ist, wählen Sie sicherheitshalber lieber „%s“. Falls Sie mit\n"
-"„%s“ antworten, werden die Dienste und Server installiert und stehen Ihnen\n"
-"nach der Installation standardmäßig zur Verfügung. !!\n"
-"\n"
-"Die Option „%s“ unterdrückt nur die Warnungen, die erscheinen, wenn das\n"
-"Installationsprogramm Pakete automatisch markiert, um Paketabhängigkeiten\n"
-"aufzulösen, wenn Sie ein Paket auswählen. Einige Pakete hängen von der\n"
-"Existenz anderer Pakete ab und die Installation eines Paketes mag die\n"
-"Installation eines anderen voraussetzen. Das Installprogramm ist in der\n"
-"Lage, diese Abhängigkeiten zu erkennen und zu erfüllen.\n"
-"\n"
-"Das kleine Diskettensymbol am unteren Rand der Liste ermöglicht es Ihnen,\n"
-"die während einer vorangegangenen Installation gespeicherte Paketauswahl\n"
-"erneut zu verwenden. Durch Betätigen der Schaltfläche öffnen Sie einen\n"
-"Dialog, der Sie auffordert, die Diskette einzulegen, die die Auswahl der\n"
-"früheren Installation enthält. Um zu erfahren, wie Sie diese Diskette\n"
-"erstellen, lesen Sie bitte den zweiten Tipp des vorangegangenen\n"
-"Installationsschrittes."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr "Automatische Abhängigkeiten"
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"„%s“: Durch Anwahl der Schaltfläche „%s“ startet den Druckerassistenten.\n"
-"Weitere Informationen zu diesem Assistenten erhalten Sie im Drucker-Kapitel\n"
-"des „Starter Handbuch“. Das dort vorgestellte Programm entspricht dem\n"
-"während der Installation angebotenen."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Konfigurieren"
-
-#: help.pm:189
-#, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Als nächstes können Sie die Dienste auswählen, die während des\n"
-"Betriebssystemstarts aktiviert werden sollen.\n"
-"\n"
-"DrakX listet hier alle Dienste, die nach der aktuellen Installation zum\n"
-"BS-Start zur Verfügung stehen, angezeigt. Lesen Sie diese Liste sorgfältig\n"
-"durch und markieren Sie nur die Dienste, die Sie immer ab dem BS-Start zur\n"
-"Verfügung haben wollen.\n"
-"\n"
-"Wenn Sie einen Dienst anwählen, erhalten Sie eine kurze Erklärung dazu.\n"
-"Wenn Sie nicht sicher sind, ob ein Dienst bzw. Server sinnvoll ist oder\n"
-"nicht, verändern Sie am Besten die voreingestellten Markierungen nicht.\n"
-"\n"
-"!! Sollten Sie Ihren Rechner als Server verwenden wollen, so müssen Sie an\n"
-"dieser Stelle besonders vorsichtig sein: wählen Sie alle Dienste ab, die\n"
-"Sie nicht benötigen. Denken Sie daran, dass etliche Dienste eine\n"
-"potentielle Einbruchstelle in das System von außen darstellen, wenn diese\n"
-"im Serverbetrieb laufen. Also, nur die Dienste einschalten, die Sie\n"
-"wirklich brauchen! !!"
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"GNU/Linux arbeitet mit GMT (Greenwich Mean Time) und übersetzt diese anhand\n"
-"der Zeitzone in Ihre lokale Zeit. Falls die Uhr Ihres Computers auf die\n"
-"lokale Zeit eingestellt ist, sollten Sie die Option „%s“ deaktivieren.\n"
-"Dadurch wird GNU/Linux mitgeteilt, dass sich die Systemzeit und die\n"
-"Hardware-Uhr in der gleichen Zeitzone befinden. Dieses Verfahren ist\n"
-"notwendig, wenn Sie auf Ihrem Computer noch ein weiteres Betriebssystem per\n"
-"Dual-Boot betreiben.\n"
-"\n"
-"Die Verwendung der Option „%s“ reguliert Ihre Uhr, indem sie Verbindung mit\n"
-"einem Zeitserver im Internet aufnimmt. Wählen Sie aus der Liste einen\n"
-"Server in Ihrer Nähe. Damit die funktioniert benötigen Sie eine ständige\n"
-"Internetverbindung. Mit dieser Option installieren Sie einen Time-Server,\n"
-"der von weiteren Maschinen Ihres lokalen Netzwerks genutzt werden kann."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardware Uhr gestellt auf GMT"
-
-#: help.pm:217
-#, c-format
-msgid "Automatic time synchronization"
-msgstr "Automatische Zeit-Synchronisation (durch NTP)"
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"Grafikkarte\n"
-"\n"
-"   DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
-"entsprechend ein. Sollten dabei Probleme auftreten, können Sie in der hier\n"
-"aufgeführten Liste Ihr Modell auswählen.\n"
-"\n"
-"   Falls für Ihre Karte verschiedene Server zur Verfügung stehen, etwa mit\n"
-"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu wählen, der Ihren\n"
-"Bedürfnissen am besten entspricht."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"X (das X Window System) ist das Herz der grafischen Benutzeroberfläche von\n"
-"GNU/Linux. Es bildet die Grundlage für die Vielzahl grafischer\n"
-"Benutzerumgebungen, die Mandriva Linux Ihnen anbietet (wie etwa KDE, GNOME,\n"
-"AfterStep oder WindowMaker).\n"
-"\n"
-"Sie erhalten eine Liste möglicher Parameter, mit deren Hilfe Sie die\n"
-"Grafikausgabe ändern können:\n"
-"\n"
-"Grafikkarte\n"
-"\n"
-"   DrakX erkennt normalerweise automatisch Ihre Grafikkarte und richtet sie\n"
-"entsprechend ein. Sollten dabei Probleme auftreten, können Sie in der hier\n"
-"aufgeführten Liste Ihr Modell auswählen.\n"
-"\n"
-"   Falls für Ihre Karte verschiedene Server zur Verfügung stehen, etwa mit\n"
-"und ohne 3D-Beschleunigung, werden Sie gebeten, den zu wählen, der Ihren\n"
-"Bedürfnissen am besten entspricht.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
-"Probleme auftreten, können Sie in der hier aufgeführten Liste Ihr Modell\n"
-"auswählen.\n"
-"\n"
-"\n"
-"\n"
-"Auflösung\n"
-"\n"
-"   Sie können hier Auflösung und Farbtiefe für Ihre Hardware wählen.\n"
-"Entscheiden Sie sich, welche Variante Ihren Wünschen am ehesten entspricht\n"
-"(Sie können diese Angaben natürlich nach der Installation noch ändern).\n"
-"Anhand des abgebildeten Monitors können Sie sich einen sofortigen Eindruck\n"
-"bilden.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Je nach Hardware kann es sein, dass dieser Eintrag nicht erscheint.\n"
-"\n"
-"   DrakX versucht eine Testbild mit denen von Ihnen gewünschten\n"
-"Einstellungen zu öffnen. Falls Sie während des Tests einen Dialog sehen, in\n"
-"dem Sie gefragt werden, ob sie die getroffenen Einstellungen behalten\n"
-"wollen, antworten Sie mit „%s“, damit DrakX mit dem nächsten\n"
-"Installationsschritt fortfährt. Sollten Sie die Nachricht nicht sehen,\n"
-"bedeutet das, dass eine oder mehrere getroffene Einstellungen nicht korrekt\n"
-"sind. Nach 12 Sekunden sollten Sie wieder das Installationsmenü sehen. Sie\n"
-"können nun die Einstellungen ändern, bis Sie das Testbild sehen.\n"
-"\n"
-"\n"
-"\n"
-"Optionen\n"
-"\n"
-"   Sie können direkt bei Betriebssystemstart die grafische Umgebung\n"
-"aktivieren. Durch Betätigen der Schaltfläche „%s“ wird in eine reine\n"
-"Textumgebung gestartet. Das ist sinnvoll für Server oder wenn Sie bei dem\n"
-"Versuch die grafische Umgebung zu konfigurieren erfolglos waren."
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Monitor\n"
-"\n"
-"   DrakX erkennt normalerweise automatisch Ihren Monitor. Sollten dabei\n"
-"Probleme auftreten, können Sie in der hier aufgeführten Liste Ihr Modell\n"
-"auswählen."
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Auflösung\n"
-"\n"
-"   Sie können hier Auflösung und Farbtiefe für Ihre Hardware wählen.\n"
-"Entscheiden Sie sich, welche Variante Ihren Wünschen am ehesten entspricht\n"
-"(Sie können diese Angaben natürlich nach der Installation noch ändern). Sie\n"
-"können sich einen Eindruck anhand des abgebildeten Monitors bilden."
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"Falls für Ihre Karte verschiedene Server zur Verfügung stehen, etwa mit und\n"
-"ohne 3D-Beschleunigung, werden Sie gebeten, den zu wählen, der Ihren\n"
-"Bedürfnissen am besten entspricht."
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Optionen\n"
-"\n"
-"   Sie können direkt bei Betriebssystemstart die grafische Umgebung\n"
-"aktivieren. Durch Betätigen der Schaltfläche „%s“ wird in eine reine\n"
-"Textumgebung gestartet. Das ist sinnvoll für Server oder wenn Sie bei dem\n"
-"Versuch die grafische Umgebung zu konfigurieren erfolglos waren."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"Sie müssen nun entscheiden, wo auf Ihrer/n Festplatte(n) Ihr Mandriva Linux\n"
-"System installiert werden soll. Sofern alles leer ist bzw. ein\n"
-"Betriebssystem alles belegt, müssen die Platte(n) neu partitioniert werden.\n"
-"Prinzipiell besteht das Partitionieren der Platte(n) darin, den\n"
-"Plattenplatz so aufzuteilen, dass Ihr Mandriva Linux darauf installiert\n"
-"werden kann.\n"
-"\n"
-"Da dieser Schritt normalerweise irreversibel ist und auch zu Datenverlusten\n"
-"führen kann haben manche unerfahrenen User Hemmungen, diesen Schritt\n"
-"auszuführen. Glücklicherweise enthält DrakX einen Assistenten, der den\n"
-"Prozess sehr vereinfacht. Lesen Sie dennoch vor Beginn im Handbuch die\n"
-"entsprechenden Passagen und lassen Sie sich Zeit mit der Entscheidung.\n"
-"\n"
-"Abhängig vom aktuellen Zustand Ihrer Platte(n) haben Sie verschiedene\n"
-"Alternativen:\n"
-"\n"
-" * „%s“: Dies führt einfach dazu, dass Ihre leere(n) Festplatte(n)\n"
-"automatisch partitioniert werden; Sie müssen sich also um nichts weiter\n"
-"kümmern.\n"
-"\n"
-" * „%s“: Der Assistent hat eine oder mehrere existierende Linux-Partitionen\n"
-"auf Ihrer Platte gefunden. Wählen Sie diese Schaltfläche, falls Sie sie\n"
-"behalten wollen. Sie werden dann gebeten, die Einhängpunkte der Partitionen\n"
-"anzugeben. Als Vorgabe erhalten Sie die Einhängpunkte der gefundenen\n"
-"Distribution, normalerweise ist es nicht nötig diese zu ändern.\n"
-"\n"
-" * „%s“: Falls der gesamte Plattenplatz aktuell für Microsoft Windows™\n"
-"verschwendet ist, müssen Sie für GNU/Linux Platz schaffen. Um dies zu\n"
-"erreichen, können Sie entweder Ihre Microsoft Windows™ Partition(en)\n"
-"samt Daten löschen (siehe „Komplette Platte löschen“) oder Ihre Microsoft\n"
-"Windows NTFS oder FAT Partition verkleinern. Letzteres geht ohne\n"
-"Datenverlust, vorausgesetzt Sie haben ihre Windows Partition(en) vorher\n"
-"defragmentiert. Dennoch sollten Sie vor diesem Schritt eine Sicherungskopie\n"
-"Ihrer Daten auf einem anderem Medium als der zu verändernden Festplatte\n"
-"vornehmen. Sie sollten diese Variante wählen, falls Sie beide\n"
-"Betriebssysteme (Microsoft Windows und Mandriva Linux) nebeneinander nutzen\n"
-"wollen.\n"
-"\n"
-"   Bevor Sie sich für diese Variante entscheiden, sei hier noch einmal\n"
-"betont, dass das bedeutet, Sie haben weniger Platz für Microsoft Windows\n"
-"als momentan.\n"
-"\n"
-" * „%s“: Falls Sie alle Daten Ihrer Platte verlieren, und sie durch Ihr\n"
-"neues Mandriva Linux System ersetzen wollen, wählen Sie diese Schaltfläche.\n"
-"Beachten Sie, dass dieser Schritt nicht rückgängig gemacht werden kann.\n"
-"\n"
-"   !! Wenn Sie diese Variante wählen, werden alle Ihre Daten auf der Platte\n"
-"gelöscht! !!\n"
-"\n"
-" * „%s“: Diese Option erscheint, wenn der gesamte Platz von Microsoft\n"
-"Windows eingenommen wird. Bei der Auswahl der Option wird einfach der\n"
-"gesamte Inhalt der Platte gelöscht und neu partitioniert.\n"
-"\n"
-"   !! Wenn Sie diese Variante wählen, werden alle Ihre Daten auf der Platte\n"
-"gelöscht! !!\n"
-"\n"
-" * „%s“: Wenn Sie Ihre Festplatte selbst von Hand partitionieren wollen,\n"
-"dann können Sie diese Option wählen. Seien Sie bitte sehr sorgfältig, wenn\n"
-"Sie diese Lösung wählen, da Sie zwar alle möglichen Einstellungen\n"
-"vornehmen, aber gleichzeitig auch sehr leicht Daten verlieren können. Diese\n"
-"Option ist nur geeignet, wenn Sie wissen, was Sie tun. Um zu erfahren, wie\n"
-"Sie DiskDrake verwenden können, lesen Sie bitte das Kapitel „Ihre\n"
-"Partitionen verwalten“ im „Starter Handbuch“."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Freien Platz verwenden"
-
-#: help.pm:374
-#, c-format
-msgid "Use existing partition"
-msgstr "Verwende existierende Partition(en)"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Den freien Platz der Windows-Partition verwenden"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Komplette Platte löschen"
-
-#: help.pm:374
-#, c-format
-msgid "Remove Windows"
-msgstr "Windows™ löschen"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Benutzerdefinierte Partitionierung"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"Nun ist es soweit, die Installation ist abgeschlossen und Ihr neues\n"
-"Betriebssystem sollte einsatzbereit sein. Klicken Sie nur noch auf „%s“ und\n"
-"das System wird neu gestartet. Vergessen Sie nicht, vorher das\n"
-"Installationsmedium (CD oder Diskette) zu entfernen. Das erste, was Sie bei\n"
-"dem Neustart nach dem Hardwaretest Ihres Computers sehen, ist das\n"
-"Auswahlmenü Ihres Bootloaders, aus dem Sie das zu startende Betriebssystems\n"
-"auswählen können.\n"
-"\n"
-"Die Schaltfläche „%s“ liefert zwei weitere Schaltflächen:\n"
-"\n"
-" * „%s“: Hiermit können Sie eine Installationsdiskette erstellen, mit deren\n"
-"Hilfe Sie eine identische automatische Installation ohne Interaktion eines\n"
-"Administrators durchzuführen können.\n"
-"\n"
-"   Es gibt zwei verschiedene Alternativen, nachdem Sie diese Schaltfläche\n"
-"aktiviert haben:\n"
-"\n"
-"    * „%s“: Diese Installation ist nur teilweise automatisch, da der\n"
-"Partitionierungsschritt (aber nur dieser!) immer noch interaktiv vonstatten\n"
-"geht.\n"
-"\n"
-"    * „%s“: Vollautomatische Installation: Die Festplatte wird vollständig\n"
-"reorganisiert. Alle darauf vorhandenen Daten gehen verloren!\n"
-"\n"
-"   Diese Funktion ist besonders nützlich, wenn man eine Menge von\n"
-"identischer Rechner einrichten will. Weitere Informationen erhalten Sie\n"
-"auch auf der Seite Auto install\n"
-"\n"
-" * „%s“:(*) Sie speichern damit die Paketauswahl, die Sie vorher getroffen\n"
-"haben. Wenn Sie später eine erneute Installation vornehmen wollen, legen\n"
-"Sie einfach die Diskette ins Laufwerk und starten Sie die Installation\n"
-"mittels [F1] an der ersten Eingabeaufforderung. Geben Sie dann »linux\n"
-"defcfg=\"floppy\"« ein.\n"
-"\n"
-"(*) Sie benötigen eine FAT formatierte Diskette (Mittels „mformat a:“ oder\n"
-"„fdformat /dev/fd0“, gefolgt von „mkfs.vfat /dev/fd0“ können Sie unter\n"
-"GNU/Linux eine solche erstellen)."
-
-#: help.pm:409
-#, c-format
-msgid "Generate auto-install floppy"
-msgstr "Erstellen einer Autoinstallations-Diskette"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Erneut abspielen"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Automatisiert"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Paketauswahl speichern"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"Sie erhalten hier die Möglichkeit bereits existierende Partitionen neu zu\n"
-"formatieren, um die darauf vorhandenen Daten zu löschen. Markieren Sie\n"
-"diese einfach ebenfalls in der Liste.\n"
-"\n"
-"Es sei angemerkt, dass nicht alle Partitionen neu formatiert werden müssen.\n"
-"Sie sollten normalerweise nur die Partitionen neu formatieren, die\n"
-"Systemdateien, jedoch keine Privatdaten enthalten (etwa „/“, „/usr“ oder\n"
-"„/var“). Partitionen wie etwa „/home“ sollten Sie normalerweise nicht neu\n"
-"formatieren.\n"
-"\n"
-"Seien Sie sorgfältig bei der Auswahl der Partitionen. Nach dem Formatieren\n"
-"sind alle zuvor darauf existierenden Daten unwiederbringlich verloren.\n"
-"\n"
-"Wenn Sie alle Einstellungen vorgenommen haben, betätigen Sie die\n"
-"Schaltfläche „%s“, um mit dem Formatieren der Partitionen zu beginnen.\n"
-"\n"
-"Betätigen Sie „%s“, wenn Sie eine andere Partition für Ihr neues\n"
-"Mandriva Linux vorgesehen haben.\n"
-"\n"
-"Betätigen Sie die Schaltfläche „%s“, falls Sie Partitionen auf defekte\n"
-"Blöcke untersuchen wollen."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Zurück"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"Es ist sehr wahrscheinlich, dass zum Zeitpunkt Ihrer Mandriva Linux\n"
-"Installation bereits einige Pakete aktualisiert wurden, etwa da noch Fehler\n"
-"entdeckt und beseitigt wurden oder da in Paketen Sicherheitslücken entdeckt\n"
-"wurden, für die bereits Lösungen existieren. Um von diesen aktualisierten\n"
-"Paketen Gebrauch zu machen, wird Ihnen nun angeboten, diese aus dem\n"
-"Internet nachzuladen. Betätigen Sie die Schaltfläche „%s“, wenn Sie einen\n"
-"Internetzugang haben, um die Pakete zu installieren, andernfalls betätigen\n"
-"Sie die Schaltfläche „%s“. Sie können diese Pakete natürlich auch jederzeit\n"
-"nach der Installation noch installieren.\n"
-"\n"
-"Betätigen der Schaltfläche „%s“ zeigt Ihnen eine Liste von Servern, von\n"
-"denen Sie die Aktualisierungen herunterladen können. Wählen Sie einen in\n"
-"Ihrer Nähe. Sie erhalten dann einen Paketauswahldialog: Kontrollieren Sie\n"
-"die Auswahl und bestätigen Sie diese durch Betätigen von „%s“. Die Pakete\n"
-"werden nun angefordert und installiert. Sollten Sie das nicht wünschen,\n"
-"betätigen Sie einfach die Schaltfläche „%s“."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Installation"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"Nun ist es an der Zeit, mittels DrakX die gewünschte Sicherheitsebene für\n"
-"Ihr System festzulegen. Als Faustregel sollte hier dienen: Je zugänglicher\n"
-"die Maschine ist und je kritischer die auf ihr gesicherten Daten sind,\n"
-"desto höher sollte die Sicherheitsebene sein. Andererseits geht die\n"
-"gewonnene Sicherheit zulasten der Benutzerfreundlichkeit und Einfachheit.\n"
-"\n"
-"Sollten Sie sich an dieser Stelle nicht sicher sein, so behalten Sie die\n"
-"Standardeinstellung bei. Sie können die Ebene später noch mittels draksec\n"
-"im Mandriva Linux Control Center anpassen.\n"
-"\n"
-"Das Feld „%s“ dient dazu, dem System mitzuteilen, wer für die Sicherheit\n"
-"dieses Rechners verantwortlich ist. An dieses Kennzeichen/diese E-Mail\n"
-"Adresse werden sicherheitsrelevante Informationen per E-Mail versandt."
-
-#: help.pm:458
-#, c-format
-msgid "Security Administrator"
-msgstr "Sicherheitsadministrator:"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Sie müssen nun entscheiden, auf welche(n) Partition(en) Ihr neues Mandriva\n"
-"Linux System installiert werden soll. Falls bereits Partitionen existieren\n"
-"(etwa von einer früheren Installation von GNU/Linux oder durch das Erzeugen\n"
-"mit einem anderen Partitionierungswerkzeug), können Sie diese verwenden.\n"
-"Anderenfalls müssen Sie Partitionen definieren.\n"
-"\n"
-"Um Partitionen zu erzeugen müssen Sie erst eine Festplatte wählen. Sie\n"
-"können die Platte wählen in dem Sie „hda“ für die erste IDE-Platte wählen,\n"
-"„sda“ für die erste SCSI-Platte, usw.\n"
-"\n"
-"Um die gewählte Platte zu partitionieren stehen folgende Möglichkeiten zur\n"
-"Verfügung:\n"
-"\n"
-" * „%s“: Betätigen dieser Schaltfläche löscht alle Partitionen auf der\n"
-"markierten Festplatte.\n"
-"\n"
-" * „%s“: Dieser Punkt aktiviert die automatische ext3- und\n"
-"Swap-Partitionen-Erstellung im ungenutzten Bereich Ihrer Festplatte.\n"
-"\n"
-"„%s“: bietet Zugriff auf weitere Möglichkeiten:\n"
-"\n"
-" * „%s“: Sie können hiermit Ihre aktuelle Partitionstabelle auf Diskette\n"
-"speichern.\n"
-"\n"
-" * „%s“: Mit dieser Schaltfläche können Sie eine vorher auf Diskette\n"
-"gesicherte Partitionstabelle wieder herstellen.\n"
-"\n"
-" * „%s“: Sollte Ihre Partitionstabelle zerstört worden sein, können Sie\n"
-"versuchen, mit dieser Schaltfläche eine Restaurierung vorzunehmen. Seien\n"
-"Sie vorsichtig! Es ist nicht unwahrscheinlich, dass dieser Versuch fehl\n"
-"schlägt.\n"
-"\n"
-" * „%s“: Alle Änderungen verwerfen und mit der ursprünglichen\n"
-"Partitionstabelle neu beginnen.\n"
-"\n"
-" * „%s“: Entfernen dieser Markierung führt dazu, dass die Anwender\n"
-"hinterher die Wechselmedien manuell ein- und aushängen müssen.\n"
-"\n"
-" * „%s“: Falls Sie keine Ahnung haben wie Sie die Festplatte partitionieren\n"
-"sollen, wählen Sie diese Schaltfläche. Sie überlassen damit die gesamte\n"
-"Arbeit unserem Assistenten, der mittels „Abra Kadabra“™ Ihre Platte\n"
-"partitioniert.\n"
-"\n"
-" * „%s“: Mit dieser Schaltfläche können Sie alle Einstellungen rückgängig\n"
-"machen.\n"
-"\n"
-" * „%s“: Anbieten bzw. Maskieren von Zusatzmöglichkeiten.\n"
-"\n"
-" * „%s“: Nachdem Sie das Partitionieren Ihrer Festplatte beendet haben,\n"
-"aktivieren Sie diese Schaltfläche, um Ihre Änderungen zu speichern.\n"
-"\n"
-"Wenn Sie die Größe einer Partition festlegen wollen, können Sie die\n"
-"Feineinstellungen mit den Rechts- / Links-Pfeiltasten Ihrer Tastatur\n"
-"vornehmen.\n"
-"\n"
-"Information: Sie können alle Einstellungen per Tastatur vornehmen. Mittels\n"
-"[Tab] und den Hoch-/Runter-Pfeiltasten können Sie sich bewegen.\n"
-"\n"
-"Wenn eine Partition ausgewählt ist, können Sie mittels:\n"
-"\n"
-" * Strg-C - eine neue Partition erstellen (wenn Sie auf einer leeren\n"
-"Partition sind)\n"
-"\n"
-" * Strg-D - die Partition löschen\n"
-"\n"
-" * Strg-M - den Einhängpunkt festlegen.\n"
-"\n"
-"Um mehr Informationen über die verschiedenen Dateisystemtypen zu erhalten,\n"
-"lesen Sie bitte das Kapitel ext2FS in der „Referenz“.\n"
-"\n"
-"Falls Sie die Installation auf einem PPC-Rechner vornehmen, sollten Sie\n"
-"eine mindestens 1MB, große HFS Start-Partition für den\n"
-"Betriebssystemstarter yaboot erstellen. Wenn Sie diese Partition etwas\n"
-"größer dimensionieren, etwa 50MB, haben Sie einen geeigneten Platz, um\n"
-"einen Rettungskern samt RamDisk abzulegen, um in Notfällen starten zu\n"
-"können."
-
-#: help.pm:530
-#, c-format
-msgid "Removable media auto-mounting"
-msgstr "Wechselmedien automatisch einhängen"
-
-#: help.pm:530
-#, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "In den Normal-Modus wechseln"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Es wurde mehr als eine Windows-Partition gefunden. Wählen Sie bitte, welche\n"
-"Sie verkleinern wollen, um Platz für Ihr neues Mandriva Linux zu schaffen.\n"
-"\n"
-"Die Partitionen werden folgendermaßen aufgelistet: „Linux-Name“,\n"
-"„Windows-Name“, „Kapazität“.\n"
-"\n"
-"„Linux-Name“ hat folgende Struktur: „Festplattentyp“, „Festplattennummer“,\n"
-"„Partitionsnummer“ (etwa „hda1“).\n"
-"\n"
-"„Festplattentyp“ ist „hd“, falls Ihre Platte eine IDE/ATAPI-Platte ist, und\n"
-"„sd“, wenn es sich um eine SCSI-Platte handelt.\n"
-"\n"
-"„Festplattennummer“ ist immer der Buchstabe hinter dem Festplattentyp. Bei\n"
-"IDE-Platten bedeutet:\n"
-"\n"
-" * „a“ ist „Master-Platte am primären IDE-Controller“;\n"
-"\n"
-" * „b“ ist „Slave-Platte am primären IDE-Controller“;\n"
-"\n"
-" * „c“ ist „Master-Platte am sekundären IDE-Controller“;\n"
-"\n"
-" * „d“ ist „Slave-Platte am sekundären IDE-Controller“;\n"
-"\n"
-"Bei SCSI-Platten steht „a“ für „niedrigste SCSI-ID“, „b“ für\n"
-"„zweitniedrigste SCSI-ID“, etc.\n"
-"\n"
-"„Windows-Name“ ist der Buchstabe, den die Partition (vermutlich) unter\n"
-"Windows erhalten würde (die erste Partition der ersten Platte heißt „C:“)."
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"„%s“: Kontrollieren Sie, ob die Auswahl des Staates, in dem Sie sich\n"
-"befinden korrekt ist. Falls nicht, betätigen Sie bitte die Schaltfläche\n"
-"„%s“ und wählen Sie den richtigen. Ist Ihr Staat nicht in der Liste, können\n"
-"Sie über die Schaltfläche „%s“ eine vollständigere Liste erzwingen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"Dieser Schritt wird nur aufgerufen, wenn mindestens eine GNU/Linux\n"
-"Partition auf Ihren Festplatten gefunden wird.\n"
-"\n"
-"DrakX fragt Sie nun nach der gewünschten Installationsart. Sie haben die\n"
-"Wahl zwischen einer Aktualisierung einer bereits vorhandenen\n"
-"Mandriva Linux-Version oder einer kompletten Neuinstallation:\n"
-"\n"
-" * „%s“: Entfernt komplett ältere Versionen von Mandriva Linux, die noch\n"
-"installiert sind - um genau zu sein, können Sie je nach aktuellem Inhalt\n"
-"Ihrer Platte auch einige ältere Linux- oder anderweitige Partitionen\n"
-"unangetastet behalten. Diese Installationsart ist gut, wenn Sie die\n"
-"Partitionseinteilung auf Ihrer Festplatte sowieso ändern oder das benutzte\n"
-"Dateisystem austauschen wollen\n"
-"\n"
-" * „%s“: Mit dieser Variante können Sie eine existierende Mandriva Linux\n"
-"Version aktualisieren. Die Partitionstabellen sowie die persönlichen\n"
-"Verzeichnisse der Anwender bleiben erhalten. Alle anderen\n"
-"Installationsschritte werden wie bei einer Installation ausgeführt.\n"
-"\n"
-"Aktualisierungen von Mandriva Linux „8.1“ oder neueren Systemen sollten\n"
-"problemlos funktionieren. Ältere Versionen von Mandriva Linux sollten Sie\n"
-"nicht zu aktualisieren versuchen."
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"Entsprechend der ausgewählten Sprache ()versucht DrakX das für Sie passende\n"
-"Tastaturlayout aus.\n"
-"\n"
-"Möglicherweise haben Sie jedoch eine Tastatur, die nicht dieser Einstellung\n"
-"entspricht: wenn Sie beispielsweise in der Schweiz eine deutsche Tastatur\n"
-"verwenden wollen oder wenn Sie in Québec (dem französischsprachigen Teil\n"
-"Kanadas) eine französischsprachige Tastatur besitzen. Wählen Sie einfach\n"
-"ein passendes Layout aus der Liste.\n"
-"\n"
-"Sollten Sie eine andere als die zur gewählten Sprache gehörende Tastatur\n"
-"verwenden wollen, wählen Sie die Schaltfläche „%s“. Sie erhalten dann eine\n"
-"Liste aller unterstützten Tastaturen.\n"
-"\n"
-"Sollten Sie sich für ein Tastaturlayout einer nicht lateinischen Sprache\n"
-"entschieden haben, werden Sie im nächsten Schritt gefragt, mit welcher\n"
-"Tastenkombination Sie zwischen dem von Ihnen gewählten und dem lateinischen\n"
-"Layout umschalten wollen."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"Als ersten Schritt wählen Sie bitte die gewünschte Sprache.\n"
-"\n"
-"Wählen Sie Ihre bevorzugte Sprache für den Installationsvorgang und\n"
-"Systemlaufzeit. Wählen Sie zuerst die Region, in der Sie sich befinden,\n"
-"anschließend die Sprache, die Sie sprechen.\n"
-"\n"
-"Durch Betätigen der Schaltfläche „%s“ erhalten Sie die Möglichkeit, weitere\n"
-"Sprachen auf Ihrem Rechner zu installieren, um diese später verwenden zu\n"
-"können. Wollen Sie etwa Spaniern muttersprachlichen Zugang zu Ihrem System\n"
-"erlauben, wählen Sie Deutsch als Hauptsprache in der Liste und im\n"
-"Fortgeschrittenen-Bereich „%s“.\n"
-"\n"
-"Zur UTF-8 (Unicode) Unterstützung: Unicode ist ein Zeichenkodierung, die\n"
-"die existierenden Kodierungen ablösen soll und die Zeichen aller\n"
-"existierender Sprachen beinhalten. Komplette Unterstützung in GNU/Linux ist\n"
-"leider immer noch nicht gegeben. Daher verwendet Mandriva Linux diese\n"
-"Kodierung nur auf Wunsch des Anwenders:\n"
-"\n"
-" * Falls Sie eine Sprache nutzen, die eine gut unterstütztes Kodierung\n"
-"verwendet (Sprachen mit Lateinischen Zeichen, Russisch, Griechisch,\n"
-"Japanisch, Chinesisch, Koreanisch, Thailändisch), wird standardmäßig das\n"
-"klassische Kodierung beibehalten;\n"
-"\n"
-" * Alle anderen Sprachen verwenden standardmäßig Unicode;\n"
-"\n"
-" * Fall Sie zwei oder mehr Sprachen verwenden wollen, die unterschiedliche\n"
-"klassische Kodierungen verwenden, wird ebenfalls Unicode verwendet;\n"
-"\n"
-" * Schlussendlich kann Unicode vom Anwender auch für Sprachen mit\n"
-"klassischer Kodierung ausgewählt werden, indem er den Punkt „%s“ markiert.\n"
-"\n"
-"Sie sind nicht auf eine weitere Sprache begrenzt. Sie können so viele\n"
-"auswählen, wie Sie wollen, ja sogar alle, indem Sie die Schaltfläche „%s“\n"
-"verwenden. Das Auswählen einer Sprache beeinflusst die installierten\n"
-"Übersetzungen der Programme, Schriften, Rechtschreibkorrekturen, etc.\n"
-"\n"
-"Um die Spracheinstellungen des ganzen Systems zwischen verschiedenen\n"
-"Sprachen umzuschalten, starten Sie einfach „localedrake“ unter dem\n"
-"privilegierten Kennzeichen „root“. Wollen Sie die Einstellungen nur für ein\n"
-"Kennzeichen ändern starten Sie denselben Befehl mit eben diesem\n"
-"Kennzeichen."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr "Spanisch"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"DrakX versucht normalerweise die Anzahl der Tasten Ihrer Maus zu erkennen.\n"
-"Sollte das nicht möglich sein, so behandelt es Ihre Maus als\n"
-"Zwei-Tasten-Maus und emuliert die mittlere Taste. Die mittlere Taste kann\n"
-"dann durch gleichzeitiges Drücken der rechten und Linken Taste simuliert\n"
-"werden. Üblicherweise erkennt DrakX korrekt, ob es sich um eine serielle,\n"
-"eine PS/2- oder um eine USB-Maus handelt.\n"
-"\n"
-"Falls Sie eine 3-Button-Maus ohne Rad haben können Sie eine Maus „%s“\n"
-"auswählen. DrakX wird dann Ihre Maus so einrichten, dass Sie das Rad in der\n"
-"folgenden Weise simulieren können: Sie drücken die mittlere Maustaste und\n"
-"bewegen Ihren Mauszeiger auf und ab.\n"
-"\n"
-"Sollte dies nicht Ihren Vorstellungen entsprechen: Wählen Sie einfach Ihren\n"
-"Maustyp aus der Liste, die Ihnen angezeigt wird.\n"
-"\n"
-"Einen generischen Maustyp, der mit fast allen Maustypen funktioniert,\n"
-"können Sie über „%s“ einstellen.\n"
-"\n"
-"Sollten Sie einen anderen als den vorgeschlagenen Maustyp gewählt haben, so\n"
-"wird Ihnen ein Testfenster angezeigt. Verwenden Sie die Knöpfe und\n"
-"gegebenenfalls das Mausrad, um sicherzustellen, dass die festgelegten\n"
-"Einstellungen funktionieren. Falls nicht, drücken Sie die Leertaste oder\n"
-"die Eingabetaste, um zurück zum Auswahlmenü zu gelangen und suchen Sie\n"
-"einen anderen Treiber aus.\n"
-"\n"
-"Es kommt vor, dass Mäuse mit Rädern nicht korrekt erkannt werden. Wählen\n"
-"Sie in diesem Fall die richtige Maus aus der vorgegebenen Liste. Stellen\n"
-"Sie sicher, dass Sie auch den Anschluss richtig angegeben haben. Nach\n"
-"betätigen der Schaltfläche „%s“, wird Ihnen ein Bild der gewählten Maus\n"
-"gezeigt. Bewegen Sie Räder und Tasten, um sicherzustellen, dass die Maus\n"
-"richtig erkannt wurde."
-
-#: help.pm:681
-#, c-format
-msgid "with Wheel emulation"
-msgstr "mit Mausrad Emulation"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr "Universal | Alle PS/2 & USB-Mäuse"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Wählen Sie bitte den richtigen Anschluss. So ist etwa der unter Windows\n"
-"„COM1“ genannte Anschluss in GNU/Linux unter „ttyS0“ erreichbar."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Dies ist der wichtigste Punkt in der Absicherung Ihres neuen\n"
-"GNU/Linux-Systems: Sie müssen das Passwort für „root“ eingeben. „root“ ist\n"
-"der Systemadministrator. Er ist der einzige der berechtigt ist, neue\n"
-"Software zu installieren, Systemdateien zu ändern oder neue\n"
-"Benutzer anzulegen. Kurz gesagt: „root“ darf alles! Daher müssen\n"
-"Sie auch ein Passwort auswählen, was nicht leicht zu erraten ist; DrakX\n"
-"teilt Ihnen mit, wenn das Passwort zu einfach ist. Sie sehen, dass es auch\n"
-"möglich ist, kein Passwort zu vergeben. Wir raten Ihnen jedoch dringend\n"
-"davon ab! GNU/Linux ist genauso anfällig für Fehler wie jedes andere \n"
-"Betriebssystem. »root« hat keine Beschränkungen. Er könnte beispielsweise\n"
-"unbeabsichtigterweise alle Daten auf allen Partitionen löschen. Also sollte\n"
-"es schwierig gemacht werden, „root“ zu werden!\n"
-"\n"
-"Das Passwort sollte eine Mischung aus alphanumerischen Zeichen sein und\n"
-"mindestens acht Zeichen lang. Es sollte niemals irgendwo aufgeschrieben\n"
-"werden.\n"
-"\n"
-"Machen Sie das Passwort aber nicht zu lang oder zu kompliziert: Sie sollten\n"
-"es sich ohne großen Aufwand merken können.\n"
-"\n"
-"Bei der Eingabe des Passwortes wird nichts angezeigt. Um ein Verschreiben\n"
-"bei dieser „Blindeingabe“ zu vermeiden müssen Sie das Passwort zweimal\n"
-"eingeben - ein Tippfehler beim ersten Versuch könnte sonst zu einem Problem\n"
-"werden, da Sie anschließend das „falsche“ Passwort bei der Verbindung mit\n"
-"dem System eingeben müssten.\n"
-"\n"
-"Wenn Sie wollen, dass der Zugang zu diesem Rechner über einen\n"
-"Authentifizierungsserver verwaltet wird, betätigen Sie die Schaltfläche\n"
-"„%s“.\n"
-"\n"
-"Falls in Ihrem Netzwerk LDAP, NIS oder PDC zur Authentifizierung verwendet\n"
-"wird, wählen Sie bitte den entsprechenden Menüpunkt für „%s“. Falls Sie "
-"nicht\n"
-"wissen, welches Protokoll Sie verwenden sollen, fragen Sie Ihren\n"
-"Netzwerkadministrator.\n"
-"\n"
-"Wenn Sie Probleme haben, sich Passwörter zu merken, oder Ihr Computer nie\n"
-"mit dem Internet verbunden wird und Sie allen Benutzern Ihres Computers\n"
-"absolut vertrauen, können Sie die Option „%s“ wählen."
-
-#: help.pm:722
-#, c-format
-msgid "authentication"
-msgstr "Authentifizierung"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"Ein Betriebssystemstarter ist ein kleines Programm, das vom Computer\n"
-"während des Startvorganges aufgerufen wird. Es ist für den Start des\n"
-"gesamten Systems verantwortlich. Im Normalfall läuft die Installation des\n"
-"Betriebssystemstarters vollkommen automatisch ab. DrakX analysiert den\n"
-"Bootsektor und ergreift dann die passenden Maßnahmen:\n"
-"\n"
-" * Findet DrakX einen Windows-Bootsektor, ersetzt es ihn durch einen GRUB-\n"
-"oder LILO-Bootsektor. Sie erhalten dadurch die Möglichkeit, beim\n"
-"Systemstart zwischen Windows (bzw. anderen Betriebssystemen, sofern\n"
-"vorhanden) und GNU/Linux auszuwählen;\n"
-"\n"
-" * Findet DrakX einen Linux-Bootsektor vor, ersetzt es ihn durch einen\n"
-"neuen;\n"
-"\n"
-"Falls DrakX nicht weiß, wo der Betriebssystemstarter installiert werden\n"
-"soll, wird es Sie um Ihre Meinung bitten. Normalerweise sollte die\n"
-"Installation auf dem „%s“ erfolgen. Durch Auswahl von „%s“ wird überhaupt\n"
-"kein Starter installiert. Verwenden Sie diese Möglichkeit nur, wenn Sie\n"
-"genau wissen was Sie tun."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:742
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Hier können Sie das Drucksystem für Ihren Rechner wählen. Andere\n"
-"Betriebssysteme bieten Ihnen nur eines, bei Mandriva Linux können Sie\n"
-"zwischen zwei verschiedenen wählen. jedes dieser Systeme ist für eine\n"
-"bestimmte Konfiguration des Systems am besten geeignet.\n"
-"\n"
-" * „%s“ -- Es steht für „print, do not queue“ (engl. für „Drucken ohne\n"
-"Warteschlange“). Falls Sie einen Drucker haben, der direkt an Ihrem Rechner\n"
-"hängt und Sie keine Netzwerkdrucker verwenden wollen, ist dies das\n"
-"Drucksystem Ihrer Wahl. „%s“ kann zwar auch mit Netzwerkdruckern umgehen, "
-"ist\n"
-"dabei aber extrem langsam. Wählen Sie „pdq“, wenn Sie ein GNU/Linux Neuling\n"
-"sind.\n"
-"\n"
-" * „%s“ - Mit dem „Common Unix Printing System“ (engl. für „Allgemeines\n"
-"Unix-Drucksystem“) können Sie ebensogut auf Ihrem direkt angeschlossenen\n"
-"Drucker drucken, wie auf einem Drucker, der an einem Server auf der anderen\n"
-"Seite der Welt hängt. Es ist einfach zu bedienen und kann sowohl als Server\n"
-"als auch als Klient für das alte „lpd“-Drucksystem verwendet werden - Es\n"
-"ist somit rückwärtskompatibel. Es ist sehr mächtig, in seiner\n"
-"Grundeinstellung verhält es sich jedoch genau wie „pdq“. Wenn Sie einen\n"
-"„lpd“ Server benötigen, müssen Sie einfach nur den „cups-lpd“ Dämon\n"
-"starten. „%s“ bietet grafische Konfigurations- und Druckmenüs.\n"
-"\n"
-"Sie können diese Wahl später immer wieder ändern, indem Sie PrinterDrake\n"
-"aus dem Mandriva Linux Control Center starten und dort die Schaltfläche „%"
-"s“\n"
-"betätigen."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr "pdq"
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Expertenmodus"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:768
-#, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX versucht nun alle IDE Festplatten Ihres Systems zu finden. Unter\n"
-"Anderem sucht DrakX auch nach PCI-SCSI-Karten, die es kennt, um sie\n"
-"automatisch mit dem richtigen Treiber einzubinden.\n"
-"\n"
-"Falls DrakX nicht weiß, welcher Treiber funktioniert, werden Sie gebeten,\n"
-"DrakX zu helfen.\n"
-"\n"
-"Sollten Sie die PCI-SCSI-Karte selbst angegeben haben, wird DrakX Sie\n"
-"fragen, ob Sie weitere Parameter angeben wollen. Sie sollten DrakX\n"
-"erlauben, die kartenspezifischen Informationen selbst zu finden. In den\n"
-"meisten Fällen wird DrakX diesen Schritt ohne Ihre Hilfe bewerkstelligen.\n"
-"\n"
-"Falls DrakX nicht in der Lage ist, die Parameter selbst zu finden, die dem\n"
-"Modul zu übergeben sind, müssen Sie diese angeben.\n"
-"\n"
-"Sie können die benötigten Informationen etwa unter Windows (sofern das auf\n"
-"Ihren Rechner installiert ist) finden, aus den Handbüchern, die sie mit dem\n"
-"Adapter erhalten haben oder von den Web-Seiten des Hardware-Anbieters\n"
-"(sofern Sie einen WWW-Zugang haben)."
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"„%s“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, wird sie hier\n"
-"angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt sein,\n"
-"betätigen Sie einfach die Schaltfläche, um sie zu korrigieren."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Soundkarte"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-"Nun bekommen Sie eine Zusammenfassung verschiedener Informationen Ihres\n"
-"Systems. Je nach vorhandener Hardware sehen Sie hier (oder eben nicht) die\n"
-"folgende Einträge. Jeder Eintrag besteht aus einem konfigurierbaren Gerät\n"
-"gefolgt vom dessen aktuellen Zustand. Durch Betätigen der Schaltfläche „%s“\n"
-"können Sie diesen ändern.\n"
-"\n"
-" * „%s“: Kontrollieren Sie die aktuelle Tastaturvorgabe und wählen Sie die\n"
-"Schaltfläche, falls Sie die Vorgabe ändern wollen.\n"
-"\n"
-" * „%s“: Kontrollieren Sie, ob die Auswahl des Staates, in dem Sie sich\n"
-"befinden korrekt ist. Falls nicht, betätigen Sie bitte die Schaltfläche\n"
-"„%s“ und wählen Sie den richtigen. Ist Ihr Staat nicht in der Liste, können\n"
-"Sie über die Schaltfläche „%s“ eine vollständigere Liste erzwingen.\n"
-"\n"
-" * „%s“: DrakX versucht die Zeitzone anhand des gewählten Staates zu\n"
-"setzen. Sollte diese Auswahl nicht korrekt sein können Sie durch Betätige\n"
-"der Schaltfläche „%s“ Ihre lokale Zeitzone setzen.\n"
-"\n"
-" * „%s“: Kontrollieren Sie die konfigurierte Maus und betätigen Sie, falls\n"
-"notwendig, die Schaltfläche.\n"
-"\n"
-" * „%s“: Durch Anwahl der Schaltfläche „%s“ startet den Druckerassistenten.\n"
-"Weitere Informationen zu diesem Assistenten erhalten Sie im Drucker-Kapitel\n"
-"des „Starter Handbuch“. Das dort vorgestellte Programm entspricht dem\n"
-"während der Installation angebotenen.\n"
-"\n"
-" * „%s“: Falls eine Soundkarte in Ihrem Rechner gefunden wurde, wird sie\n"
-"hier angezeigt. Sollte die von DrakX getroffene Auswahl nicht korrekt sein,\n"
-"betätigen Sie einfach die Schaltfläche, um sie zu korrigieren.\n"
-"\n"
-" * „%s“: Falls eine TV-Karte in Ihrem Rechner gefunden wurde, wird sie hier\n"
-"angezeigt. Falls Sie eine TV-Karte besitzen, die hier nicht richtig erkannt\n"
-"wurde, können Sie versuchen, diese manuell einzurichten. Betätigen Sie\n"
-"einfach die Schaltfläche „%s“.\n"
-"\n"
-" * „%s“: Falls eine ISDN Karte in Ihrem Rechner gefunden wurde, wird sie\n"
-"hier angezeigt. Durch Anwahl der Schaltfläche „%s“ können Sie die Parameter\n"
-"ändern.\n"
-"\n"
-" * „%s“: DrakX richtet Ihre Grafikumgebung normalerweise in der Auflösung\n"
-"„800×600“ bzw. „1024×768“ ein. Sollte Ihnen das nicht zusagen, können Sie\n"
-"es durch betätigen der Schaltfläche „%s“ ändern.\n"
-"\n"
-" * „%s“: Falls Sie Ihren Internetzugang oder Ihr lokales Netzwerk nun\n"
-"einrichten wollen, können Sie das hier tun. Lesen Sie sich dazu die\n"
-"gedruckte Dokumentation durch oder benutzen Sie das Mandriva Linux Control\n"
-"Center nachdem die Installation beendet ist.\n"
-"\n"
-" * „%s“: Hier können Sie HTTP- und FTP-Proxyadressen eintragen falls Ihre\n"
-"Maschine die Verbindung über einen Proxyserver abwickelt.\n"
-"\n"
-" * „%s“: Dieser Eintrag ermöglicht es Ihnen, die Sicherheitsebene Ihres\n"
-"Systems zu ändern, die Sie in einem früheren Installationsschritt ()\n"
-"gewählt haben.\n"
-"\n"
-" * „%s“: Falls Sie Ihren Rechner mit dem Internet verbinden wollen, ist es\n"
-"sinnvoll sich vor ungebetenen Eindringlingen durch Einrichten einer\n"
-"Firewall zu schützen. Weitere Informationen erhalten Sie im „Starter\n"
-"Handbuch“.\n"
-"\n"
-" * „%s“: Falls Sie die Konfiguration Ihres Betriebssystemstarters\n"
-"(„Bootloader“) ändern wollen, wählen Sie diese Schaltfläche. Es sei\n"
-"angemerkt, dass dieser Punkt sich an fortgeschrittenere Nutzer richtet.\n"
-"Hilfe finden Sie in der gedruckten Dokumentation oder im integrierten\n"
-"Hilfeteil des Mandriva Linux Control Center.\n"
-"\n"
-" * „%s“: Sie können hier die Dienste wählen, die ab dem Start von\n"
-"Mandriva Linux zur Verfügung gestellt werden sollen. Wollen Sie den Rechner\n"
-"als Server verwenden, sollten Sie unbedingt einen Blick auf diese Liste\n"
-"werfen."
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Zeitzone"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "TV-Karte"
-
-#: help.pm:855
-#, c-format
-msgid "ISDN card"
-msgstr "ISDN-Karte"
-
-#: help.pm:855
-#, c-format
-msgid "Graphical Interface"
-msgstr "Grafikumgebung"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Netzwerk"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Proxies"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Sicherheitsebene"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Firewall"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Bootloader"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Dienste"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Bitte wählen Sie die Festplatte, die Sie löschen wollen, um Ihr neues\n"
-"Mandriva Linux zu installieren. Bedenken Sie dabei, dass alle Daten auf\n"
-"dieser Platte nach diesem Schritt unwiederbringlich verloren sind!"
-
-# DO NOT BOTHER TO MODIFY HERE, SEE:
-# cvs.mandriva.com:/cooker/doc/manualB/modules/de/drakx-chapter.xml
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Betätigen Sie die Schaltfläche „%s“, wenn Sie alle Partitionen und die\n"
-"darauf befindlichen Daten löschen wollen. Bedenken Sie, dass Sie nach\n"
-"betätigen der Schaltfläche „%s“ auch an die möglicherweise noch vorhandenen\n"
-"Windows-Daten nicht mehr gelangen werden!\n"
-"\n"
-"Wählen Sie „%s“, um die Aktion ohne Datenverlust abzubrechen."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Weiter ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Zurück"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Ich kann die Kernel-Module, die zu diesem Kernel passen, nicht finden (Datei "
-"%s fehlt). Das bedeutet normalerweise das Ihre Startdiskette nicht mit dem "
-"Installationsmedium übereinstimmt (Bitte erstellen Sie eine neue "
-"Startdiskette). "
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Sie müssen auch %s formatieren."
-
-#: install_any.pm:406
-#, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Haben Sie zusätzliche Medien?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr ""
-"Die folgenden Medien wurden gefunden und werden während der Installation "
-"verwendet: %s.\n"
-"\n"
-"\n"
-"Möchten Sie weitere Installationsmedien angeben?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (http)"
-msgstr "Netzwerk (http)"
-
-#: install_any.pm:422
-#, c-format
-msgid "Network (ftp)"
-msgstr "Netzwerk (ftp)"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr "Legen Sie die CD 1 wieder ein"
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Keine Geräte gefunden"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr "Legen Sie die CD ein"
-
-#: install_any.pm:489
-#, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Kann CDROM nicht einbinden"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr "URL der Spiegel?"
-
-#: install_any.pm:558
-#, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Kann die Datei hdlist nicht auf diesem Spiegel finden"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Bitte wechseln Sie die CD!\n"
-"Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk. Drücken Sie dann auf „OK“."
-
-#: install_any.pm:738
-#, c-format
-msgid "Copying in progress"
-msgstr "Dateien werden kopiert"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Sie haben die folgenden Server ausgewählt: %s\n"
-"\n"
-"\n"
-"Diese Server werden standardmäßig aktiviert. Sie haben keine bekannten\n"
-"Sicherheitsprobleme, jedoch könnten einige neue entdeckt werden. Stellen\n"
-"Sie deshalb sicher, dass Sie diese Pakete so zeitig wie möglich "
-"aktualisieren.\n"
-"\n"
-"\n"
-"Wollen Sie diese Server wirklich installieren?\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Folgende Pakete werden entfernt, um das Aktualisieren Ihres Rechners zu "
-"ermöglichen: %s\n"
-"\n"
-"\n"
-"Wollen Sie diese Pakete wirklich entfernen?\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Fehler beim Lesen der Datei %s"
-
-#: install_any.pm:1559
-#, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Die folgenden Datenträger wurden umbenannt:"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr "%s (vorher als %s bezeichnet)"
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Ein Fehler ist aufgetreten - es wurden keine gültigen Geräte gefunden, auf "
-"denen neue Dateisysteme erstellt werden können. Bitte überprüfen Sie Ihre "
-"Hardware(-Konfiguration) auf mögliche Fehler und falsche Einstellungen."
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, c-format
-msgid "Please choose a media"
-msgstr "Bitte wählen Sie ein Medium"
-
-#: install_any.pm:1698
-#, c-format
-msgid "Bad media %s"
-msgstr "Mediumfehler %s"
-
-#: install_any.pm:1710
-#, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Die Datei existiert bereits. Überschreiben?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Vor der Partitionierung kann ich keine Screenshots machen."
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Die Screenshots liegen nach der Installation unter „%s“"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Installation"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Systemkonfiguration"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Einige Hardware-Komponenten Ihres Rechners benötigen „proprietäre“\n"
-"Treiber. Weitere Infos hierzu finden Sie unter: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Sie brauchen eine root-Partition.\n"
-"Erzeugen Sie eine Partition (oder klicken Sie auf eine existierende).\n"
-"Wählen Sie „Einhängepunkt“ und setzen Sie ihn auf „/“"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Sie haben keine Auslagerungspartition.\n"
-"\n"
-"Wollen Sie trotzdem fortfahren?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Sie müssen eine FAT-Partition in „/boot/efi“ eingehängt haben."
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nicht genug freier Platz, um die neue Partition anlegen zu können."
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Verwende existierende Partition(en)"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Es gibt keine existierende Partition, die ich verwenden kann."
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Auf der Windows-Partition Loopbacks anlegen"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Auf welche Partition wollen Sie Linux4Win installieren?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Wählen Sie die Größen"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Größe der root-Partition in MB: "
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Größe der Auslagerungspartition in MB: "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Sie haben keine FAT-Partition, die ich als Loopback verwenden kann\n"
-"(möglicherweise haben Sie auch einfach nur nicht mehr genügend\n"
-"freien Speicher)."
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Bei welcher Partition wollen Sie die Größe ändern?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"Das Werkzeug zum Verändern der FAT-Partitionsgröße kann mit der \n"
-"Partition nicht arbeiten. Folgender Fehler trat auf:%s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Berechne die Größe der Windows-Partition"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Ihre Windows-Partition ist zu sehr fragmentiert.\n"
-"Starten Sie bitte erst „defrag“ unter Windows."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"WARNUNG!\n"
-"\n"
-"DrakX wird nun die Größe Ihrer Windows-Partition verändern.\n"
-"Seien Sie vorsichtig: Diese Aktion ist gefährlich. Falls Sie es noch\n"
-"nicht getan haben, sollten Sie nun die Installation abbrechen, um\n"
-"„chkdsk c:“ von einem DOS Prompt unter Windows auf die\n"
-"Partition anzuwenden (Achtung:scandisk unter der grafischen\n"
-"Windows Oberfläche reicht nicht aus, bitte „chkdsk“ in einem DOS Prompt "
-"ausführen!)\n"
-"Defragmentieren. Anschließend können Sie die Installation erneut starten.\n"
-"Sie sollten natürlich generell Sicherheitskopien Ihrer Daten angelegt\n"
-"haben. Falls dies der Fall ist, können Sie mit OK fortfahren."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Wieviel Platz benötigen sie noch für Windows auf"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "Partition %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Größe der Windows-Partition wird geändert"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-Größenanpassung schlug fehl: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Sie haben keine FAT-Partition, deren Größe ich anpassen kann\n"
-"(möglicherweise haben Sie auch einfach nur nicht mehr genügend\n"
-"freien Speicher)."
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Windows™ löschen"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Sie haben mehr als eine Festplatte.\n"
-"Auf welche soll GNU/Linux installiert werden?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"SÄMTLICHE existierende Partitionen samt der darauf befindlichen Daten \n"
-"auf Laufwerk %s gehen dabei verloren"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Fdisk verwenden"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Sie können nun %s partitionieren.\n"
-"Vergessen Sie nicht die Einstellungen mittels ‚w‘ zu speichern, \n"
-"sobald Sie fertig sind."
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Ich finde nicht genug Platz für die Installation"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Der DrakX-Partitionierungsassistent fand folgende Lösung:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Das Partitionieren schlug fehl: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Netzwerkverbindung herstellen"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Netzwerkverbindung trennen"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Bei dieser Übersetzung handelt es sich um eine inoffizielle Übersetzung\n"
-"der Mandriva Linux-Lizenz in die deutsche Sprache. Sie ist keine\n"
-"rechtsverbindliche Darstellung der Lizenzbedingungen der Software in\n"
-"dieser Distribution - nur der ursprüngliche französische Text der\n"
-"Mandriva Linux-Lizenz ist rechtsverbindlich. Wir hoffen aber, dass diese\n"
-"Übersetzung den deutschsprechenden Benutzern das Verständnis dieser\n"
-"Lizenz erleichtert.\n"
-"\n"
-"\n"
-"Einführung\n"
-"\n"
-"Das Betriebssystem und die anderen Komponenten, die in Mandriva Linux\n"
-"enthalten sind, werden hier „Software-Produkte“ genannt. Die\n"
-"Software-Produkte umfassen, aber sind nicht beschränkt auf, die\n"
-"Gesamtheit der Programme, Methoden, Regeln, und Dokumentation, welche\n"
-"zum Betriebssystem und den anderen Komponenten der Mandriva Linux\n"
-"Distribution gehören.\n"
-"\n"
-"\n"
-"1. Lizenzabkommen\n"
-"\n"
-"Bitte lesen Sie dieses Dokument sorgfältig. Dieses Dokument ist ein\n"
-"Lizenzabkommen zwischen Ihnen und Mandriva S. A. welches sich auf\n"
-"die Software-Produkte bezieht.\n"
-"Durch Installation, Duplizierung oder Benutzung der Software-Produkte in\n"
-"irgendeiner Art und Weise erklären Sie sich mit den Bedingungen dieser\n"
-"Lizenz einverstanden.\n"
-"Wenn Sie mit irgendeinem Punkt dieser Lizenz nicht einverstanden sind,\n"
-"ist es Ihnen nicht erlaubt, die Software-Produkte zu installieren,\n"
-"duplizieren oder zu benutzen.\n"
-"Mit jedem Versuch, die Software-Produkte in einer Art und Weise zu\n"
-"benutzen, die nicht den Bedingungen dieser Lizenz entspricht, verlieren\n"
-"Sie die Ihnen mit dieser Lizenz eingeräumten Rechte. In diesem Fall\n"
-"haben Sie unverzüglich alle Kopien der Software-Produkte zu vernichten.\n"
-"\n"
-"\n"
-"2. Eingeschränkte Garantie\n"
-"\n"
-"Die Software-Produkte und die beigefügte Dokumentation werden dem\n"
-"Benutzer lediglich zur Verfügung gestellt, es wird keinerlei Garantie\n"
-"gegeben soweit es gesetzlich zulässig ist.\n"
-"Mandriva S. A. haftet unter keinen Umständen, soweit gesetzlich\n"
-"zulässig, für direkte oder indirekte Schäden irgendwelcher Art,\n"
-"(inklusive uneingeschränkten Schäden aufgrund Verlust von\n"
-"Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, Gebühren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund der Benutzung oder\n"
-"der Unmöglichkeit der Benutzung der Software-Produkte entstehen, auch\n"
-"wenn Mandriva S. A. über die Möglichkeit und das Auftreten\n"
-"derartiger Schäden unterrichtet wurde.\n"
-"\n"
-"\n"
-"EINGESCHRÄNKTE VERANTWORTLICHKEIT BEZOGEN AUF DEN BESITZ UND DIE\n"
-"BENUTZUNG VON SOFTWARE, DIE IN EINIGEN LÄNDERN VERBOTEN IST.\n"
-"\n"
-"\n"
-"Soweit gesetzlich zulässig, haften Mandriva S. A. und deren\n"
-"Vertreiber unter keinen Umständen für direkte oder indirekte Schäden\n"
-"irgendwelcher Art, (inklusive uneingeschränkten Schäden aufgrund Verlust\n"
-"von Geschäftsbeziehungen, Unterbrechung von Geschäftsvorgängen,\n"
-"finanziellen Verlust, Gebühren oder Strafen aufgrund gerichtlicher\n"
-"Entscheide, oder jegliche Folgeschäden) die aufgrund des Besitzes und\n"
-"der Benutzung von Software-Komponenten oder aufgrund des Ladens von\n"
-"Software-Komponenten von den Internet-Servern von Mandriva S. A.,\n"
-"deren Besitz und Benutzung in einigen Ländern aufgrund lokaler Gesetze\n"
-"nicht gestattet ist, entstehen.\n"
-"Diese Einschränkung der Verantwortlichkeit bezieht sich auch, aber nicht\n"
-"nur, auf die Komponenten für starke Kryptografie enthalten in den\n"
-"Software-Produkten.\n"
-"\n"
-"\n"
-"3. Die GPL und verwandte Lizenzen\n"
-"\n"
-"Die Software-Produkte bestehen aus Komponenten, die von verschiedenen\n"
-"Personen und Einrichtungen erstellt wurden. Die meisten Komponenten\n"
-"unterliegen den Bedingungen der GNU General Public License, im folgenden\n"
-"„GPL“ genannt, oder ähnlichen Lizenzen. Die meisten dieser Lizenzen\n"
-"erlauben es, die Komponenten, die diesen Lizenzen unterliegen, zu\n"
-"benutzen, zu duplizieren, anzupassen, und weiterzugeben. Bitte lesen sie\n"
-"sorgfältig die Bedingungen der Lizenzabkommen von jeder Komponente,\n"
-"bevor Sie sie benutzen. Jegliche Frage zur Lizenz einer Komponente ist an\n"
-"den Autor der Komponente und nicht an Mandriva S. A. zu richten. Die\n"
-"von Mandriva S. A. erstellten Programme unterliegen der GPL.\n"
-"Von Mandriva S. A. geschriebene Dokumentation unterliegt einer\n"
-"spezifischen Lizenz. Bitte lesen Sie die Dokumentation für weitere\n"
-"Details.\n"
-"\n"
-"\n"
-"4. Geistiges Eigentum\n"
-"\n"
-"Alle Rechte an den Komponenten der Software-Produkte liegen bei den\n"
-"entsprechenden Autoren und sind durch die Urheberrechtsgesetze für\n"
-"Softwareprodukte geschützt.\n"
-"Mandriva S. A. behält sich das Recht vor, die Software-Produkte zu\n"
-"modifizieren und anzupassen.\n"
-"„Mandriva“, „Mandriva Linux“ und entsprechende Logos sind eingetragene\n"
-"Warenzeichen der Mandriva S. A..\n"
-"\n"
-"\n"
-"5. Gesetzliche Bestimmungen\n"
-"\n"
-"Wenn irgendein Teil dieses Lizenzabkommens durch einen Gerichtsentscheid\n"
-"für ungültig, illegal oder inakzeptabel erklärt wird, wird dieser Teil\n"
-"aus dem Abkommen ausgeschlossen. Sie bleiben weiterhin an die anderen,\n"
-"anwendbaren Teile gebunden.\n"
-"Die Bedingungen dieses Lizenzabkommens unterliegen den Gesetzen von\n"
-"Frankreich. Alle Unstimmigkeiten bezüglich der Bedingungen dieser Lizenz\n"
-"werden vorzugsweise außergerichtlich beigelegt. Letztes Mittel ist das\n"
-"zuständige Gericht in Paris, Frankreich.\n"
-"Zu jeglicher Frage zu diesem Dokument kontaktieren Sie bitte\n"
-"Mandriva S. A.\n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-"Warnung: Freie Software ist nicht notwendigerweise patentfrei, und einige\n"
-"der beigefügten Software könnte durch ein Patent geschützt sein in Ihrem "
-"Land.\n"
-"Zum Beispiel verlangen die beigefügten MP3-Decoder eine Lizenz für weiter-\n"
-"gehende Nutzung (siehe dazu: http://www.mp3licensing.com). Falls Sie "
-"unsicher \n"
-"sind ob ein Patent sie betrifft prüfen Sie die Gesetze Ihres Landes."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Achtung\n"
-"\n"
-"Bitte lesen Sie die nachfolgenden Ausführungen sorgfältig. Wenn Sie mit\n"
-"irgendeinem Teil nicht einverstanden sind, dürfen Sie nicht den Inhalt\n"
-"der folgenden CDs installieren. Klicken Sie auf „Zurückweisen“, um die\n"
-"Installation ohne Verwendung dieser CDs fortzusetzen.\n"
-"\n"
-"\n"
-"Einige Komponenten auf den nachfolgenden CDs unterliegen nicht der GPL\n"
-"oder ähnlichen Lizenzabkommen. Jede dieser Komponenten unterliegt dann\n"
-"den Bedingungen ihrer eigenen spezifischen Lizenz.\n"
-"Bitte lesen Sie diese Lizenzen sorgfältig und nur wenn Sie mit ihnen\n"
-"einverstanden sind, dürfen Sie die entsprechenden Produkte entsprechend\n"
-"ihrer Lizenz benutzen und weitergeben.\n"
-"Solche Lizenzen verbieten im allgemeinen das Transferieren, Duplizieren\n"
-"(außer für Sicherheitskopien), Weitergeben, Decompilieren, Disassamblen\n"
-"oder Verändern der Komponente.\n"
-"Jeder Bruch des Lizenzabkommens beendet sofort die Ihnen im Rahmen der\n"
-"Lizenz eingeräumten Rechte. Wenn die jeweilige Lizenz Ihnen nicht\n"
-"entsprechende Rechte einräumt, dürfen Sie die Programme nicht auf mehr\n"
-"als einem System installieren oder zur Benutzung in einem Netzwerk\n"
-"einrichten. Im Zweifelsfall kontaktieren Sie bitte den Vertreiber oder\n"
-"Herausgeber der jeweiligen Komponente.\n"
-"Transfer an Dritte oder Kopieren solcher Komponenten inklusive ihrer\n"
-"Dokumentation ist normalerweise verboten.\n"
-"\n"
-"\n"
-"Alle Rechte an den Komponenten der nachfolgenden CDs liegen bei den\n"
-"jeweiligen Autoren und sind durch die Urheberrechtsgesetze für\n"
-"Softwareprodukte geschützt.\n"
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Herzlichen Glückwunsch, die Installation ist abgeschlossen.\n"
-"Entfernen Sie die Startmedien (CD-ROMs / Disketten) und drücken Sie die "
-"Eingabetaste zum Neustart Ihres Rechners.\n"
-"\n"
-"Für Informationen zu Sicherheitsaktualisierungen dieser Version von Mandriva "
-"Linux informieren Sie sich bitte unter \n"
-"\n"
-"%s\n"
-"\n"
-"Wie Sie Ihr System warten können, erfahren Sie im Kapitel „Nach der "
-"Installation“ im offiziellen Benutzerhandbuch von Mandriva Linux."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Den Einhängepunkt %s kopieren"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Einige wichtige Pakete wurden nicht richtig installiert. \n"
-"Entweder ist Ihr CD-ROM-Laufwerk oder Ihre CD-ROM defekt. \n"
-"Testen Sie die CD-ROM auf einem Linux-Rechner mittels „rpm -qpl \n"
-"media/main/*.rpm“\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Beginn von Schritt „%s“\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Auswahl der Paketgruppen"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Gesamtgröße: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Ungültiges Paket"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Version: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Größe: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "%d KB\n"
-msgstr "%d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Wichtigkeit: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Sie können dieses Paket nicht auswählen/abwählen."
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "%s fehlt"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "Aufgrund unerfüllter %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "Versuche %s voranzutreiben"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "um %s beizubehalten"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"Sie können dieses Paket nicht auswählen, da Sie nicht genug Plattenplatz "
-"haben."
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Die folgenden Pakete werden installiert"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Die folgenden Pakete werden entfernt"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Dieses Paket ist existenziell, sie können es nicht abwählen!"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es ist bereits installiert!"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Dieses Paket muss aktualisiert werden.\n"
-"Sind Sie sicher, dass Sie es aus der Auswahl entfernen wollen?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr ""
-"Sie können dieses Paket nicht aus der Auswahl entfernen. \n"
-"Es muss aktualisiert werden!"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Automatisch markierte Pakete anzeigen"
-
-#: install_steps_gtk.pm:389
-#, c-format
-msgid "Load/Save selection"
-msgstr "Auswahl laden/speichern"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Erneuere Paket Auswahl"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Minimal-Installation"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Zu installierende Pakete auswählen"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Installation wird durchgeführt"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Schätzung"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Keine Details"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Verbleibende Zeit "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Bitte warten, Installation wird vorbereitet ..."
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d Pakete"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Installation des Paketes %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Ablehnen"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Bitte wechseln Sie die CD!\n"
-"Bitte legen Sie die CD-ROM „%s“ in Ihr Laufwerk. Drücken Sie dann auf „OK“.\n"
-"Falls Sie sie nicht vorliegen haben, drücken Sie auf „Abbrechen“."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Bei der Anforderung folgender Pakete trat ein Fehler auf:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Wollen Sie trotzdem fortfahren?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Bei der Installation der Pakete trat ein Fehler auf:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "Nicht eingerichtet"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-"Die folgenden Installationsmedien wurden gefunden.\n"
-"Wählen Sie die Medien ab, die Sie überspringen wollen."
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-"Sie haben die Möglichkeit, den Inhalt der CDs vor der Installation auf "
-"Festplatte zu kopieren. Die Installation wird dann von Festplatte "
-"fortgeführt und die Softwarepakete bleiben verfügbar, nachdem das System "
-"fertig installiert ist."
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr "Kopiere die CDs"
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Lizenzvereinbarung"
-
-#: install_steps_interactive.pm:89
-#, c-format
-msgid "Release Notes"
-msgstr "Versionshinweise"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: install_steps_interactive.pm:121
-#, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Komplette Liste aller Tastaturlayouts"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Installation/Aktualisierung"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Handelt es sich um eine Installation oder eine Aktualisierung?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Aktualisiere %s"
-
-#: install_steps_interactive.pm:168
-#, c-format
-msgid "Encryption key for %s"
-msgstr "Schlüssel für %s"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Maus-Port"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihre Maus hängt."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Tastenemulation"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Emulation der 2. Taste"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Emulation der 3. Taste"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguriere PCMCIA-Karten..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "IDE konfigurieren"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "Keine Partition verfügbar"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Durchsuche die Partitionen, um die Einhängepunkte zu finden"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Wählen Sie die Einhängepunkte"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Sie haben keinen Platz für die 1 MB große Start-Partition vorgesehen! Die "
-"Installation wird fortgesetzt, Sie müssen jedoch eine Start-Partition mit "
-"DiskDrake erstellen."
-
-#: install_steps_interactive.pm:317
-#, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Sie müssen einen PPC PReP Boot Lader erzeugen! Die Installation wird "
-"fortgesetzt, Sie müssen jedoch eine Start-Partition mit DiskDrake erstellen."
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Zu formatierende Partitionen auswählen"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Soll ich nach defekten Blöcken suchen?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Es traten Fehler beim Prüfen des Dateisystems %s auf. Wollen Sie, dass ich "
-"versuche sie zu beheben? (Achtung: das kann zu Datenverlust führen)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Der Swap-Bereich ist zu klein, um die Installation zu ermöglichen! \n"
-"Bitte vergrößern Sie den Bereich."
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Suche nach vorhandenen Paketen und aktualisiere RPM-Datenbank ..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Suche nach vorhandenen Paketen..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Suche nach bereits installierten Paketen ..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Finde die zu aktualisierenden Pakete ..."
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Bitte wählen Sie einen Mirror, von dem Sie die Pakete holen wollen."
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Es steht auf Ihrem System nicht genügend Speicherplatz für die \n"
-"Installation bzw. Aktualisierung zur Verfügung (%d > %d)."
-
-#: install_steps_interactive.pm:495
-#, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Bitte wählen Sie, ob die Paketauswahl geladen oder\n"
-"gespeichert werden soll. Es handelt sich um das gleiche\n"
-"Format, wie die unter „auto_install“ erzeugten Disketten."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Last"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Speichern"
-
-#: install_steps_interactive.pm:505
-#, c-format
-msgid "Bad file"
-msgstr "Datei fehlerhaft"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Gewünschte Größe übersteigt den verfügbaren Platz"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Installationstyp"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Sie haben keine Paketgruppe ausgewählt.\n"
-"Bitte wählen Sie die minimale Installation, die Sie wünschen."
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Mit minimaler Dokumentation (Empfohlen)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Extrem minimale Installation (ohne „urpmi“)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Alle"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Falls Sie alle aufgeführten CDs haben, wählen Sie „OK“, \n"
-"falls Sie keine der aufgeführten CDs haben, wählen Sie „Abbrechen“,\n"
-"falls nur einige der aufgeführten CDs fehlen, entfernen Sie die \n"
-"entsprechende Markierung und wählen Sie dann „OK“."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM „%s“"
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Bereite Installation vor"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Installiere Paket %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Bereite weitere Konfiguration vor ..."
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"Sie haben nun die Möglichkeit Pakete zu installieren, die seit Erscheinen\n"
-"der Distribution aktualisiert wurden. Es handelt sich um \n"
-"Sicherheitsaktualisierungen und Fehlerkorrekturen.\n"
-"\n"
-"Allerdings benötigen Sie dafür eine funktionierende Internetverbindung.\n"
-"\n"
-"Möchten Sie die Aktualisierungen vornehmen?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontaktiere Mirror, um eine Liste verfügbarer Pakete zu erhalten..."
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Mirror %s nicht erreichbar"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Wollen Sie es nochmal versuchen?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Wählen Sie Ihre Zeitzone"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Automatische Zeit-Synchronisation (durch NTP)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP-Server"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Zusammenfassung"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "System"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Hardware"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "CUPS-Server im Netzwerkbetrieb"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Kein Drucker"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Verfügen Sie über eine ISA-Soundkarte?"
-
-#: install_steps_interactive.pm:1028
-#, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Starten Sie „sndconfig“ oder „alsaconf“ nach der Installation, um Ihre "
-"Soundkarte einzurichten."
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Es wurde keine Soundkarte gefunden. Versuchen Sie „harddrake“ nach der "
-"Installation."
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Grafikumgebung"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Netzwerk & Internet"
-
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "configured"
-msgstr "konfiguriert"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Sicherheit"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "aktiviert"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "deaktiviert"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Start"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s auf %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Dienste: %d aktiviert von %d registrierten"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Sie haben X nicht konfiguriert. Sind Sie sicher?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Bereite Bootloader vor ..."
-
-#: install_steps_interactive.pm:1230
-#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Sie scheinen einen „OldWorld“ oder unbekannten Rechner zu verwenden. Der "
-"Bootloader „yaboot“ wird daher leider nicht funktionieren. Die Installation "
-"wird fortgesetzt, sie werden jedoch „BootX“ oder etwas ähnliches verwenden "
-"müssen um Ihren Rechner zu starten. Der Kernelparameter für das Root-"
-"Dateisystem ist: root=%s"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Möchten Sie „aboot“ verwenden?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Fehler bei der Installation von aboot. Soll ich die Installation \n"
-"mit Gewalt versuchen, auch wenn dies die Zerstörung der ersten \n"
-"Partition verursachen kann?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-"In dieser Sicherheitseinstellung ist der Zugriff auf Datein der "
-"Windowspartition nur dem Administrator erlaubt"
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Legen Sie eine leere Diskette in das %s ein."
-
-#: install_steps_interactive.pm:1294
-#, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Bitte legen Sie eine andere Diskette als Treiberdiskette ein"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Erstelle eine Auto-Installationsdiskette"
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Einige Schritte sind noch nicht komplett.\n"
-"\n"
-"Wollen Sie DrakX wirklich beenden?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Die automatische Installation kann, falls Sie wollen,\n"
-"vollautomatisch erfolgen. In diesem Fall wird die\n"
-"Festplatte vollständig durch DrakX rekonfiguriert\n"
-"(diese Möglichkeit ist für die Replikation auf anderen\n"
-"Rechnern gedacht).\n"
-"\n"
-"Vermutlich werden Sie es vorziehen, erneut eine normale\n"
-"Installation durchzuführen.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"   <Tab>/<Alt-Tab> nächstes Element | <Leertaste> auswählen | <F12> weiter "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Wählen Sie eine Datei"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Hinzufügen"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Ändern"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Entfernen"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Einfach"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Assistent beenden"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Los"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Schlechte Wahl, bitte versuchen Sie es noch einmal\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ihre Wahl? (Standard ‚%s‘) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Angaben, die Sie machen müssen:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ihre Wahl? (0/1, Standard ‚%s‘) "
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Schaltfläche „%s“: %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Möchten Sie diese Schaltfläche betätigen?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ihre Wahl? (Standard „%s“ %s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr "Geben Sie „void“ für einen leeren Eintrag an"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Es gibt zahlreiche Auswahlmöglichkeiten von (%s).\n"
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Bitte wählen Sie die Nummer aus dem Bereich, die Sie bearbeiten wollen,\n"
-"oder betägen Sie die Eingabetaste um fortzufahren. Ihre Wahl? "
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Anmerkung: Ein Eintrag wurde geändert:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Erneut verschicken"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Tschechien (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Deutschland"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Spanien"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Finnland"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Frankreich"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norwegen"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Polen"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Russland"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Schweden"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "Großbritannien"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "US Tastatur"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albanien"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Armenien (alt)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Armenien (Schreibmaschine)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Armenien (Phonetisch)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Arabisch"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Aserbeidschan (Lateinisches Layout)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belgien"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bangladesh (Inscript Layout)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bangladesh (Probhat Layout)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bulgarien (Phonetisch)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bulgarien (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brasilien (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosnien"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Weißrussland"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Schweiz (deutsches Layout)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Schweiz (französisches Layout)"
-
-#: keyboard.pm:204
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Cherokee syllabics"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Tschechien (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Deutschland (ohne Akzenttasten)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Devanagari"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Dänemark"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (USA)"
-
-#: keyboard.pm:213
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Spanien)"
-
-#: keyboard.pm:215
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Französisch)"
-
-#: keyboard.pm:217
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (GB)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegen)"
-
-#: keyboard.pm:220
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (Polnisch)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (Schweden)"
-
-#: keyboard.pm:222
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Dzongkha/Tibetanisch"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estland"
-
-#: keyboard.pm:227
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Faroeisch"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Georgien (Kyrillisches Layout)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Georgien (Lateinisches Layout)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Griechenland"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr "Griechisch (polytonic)"
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Indien (Gujarati)"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Indien (Gurmukhi)"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Kroatien"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Ungarn"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr "Irisch"
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Israel"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Israel (Phonetisch)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Iran"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Island"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Italien"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "Grönland (Inuktitut)"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Japan (106 Tasten)"
-
-#: keyboard.pm:249
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kanada"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Korea"
-
-#: keyboard.pm:254
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Kurdisch (arabische Schrift)"
-
-#: keyboard.pm:255
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Kyrgyz Tastatur"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Lateinamerika"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laos"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Litauen (AZERTY - alt)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Litauen (AZERTY - neu)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Litauen (QWERTY - „number row“)"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Litauen (QWERTY - Phonetisch)"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Lettland"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malayalam"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Mazedonien"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Myanmar (Burmesien)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongolei (Kyrillisches Layout)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Malta (GB)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Malta (USA)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Niederlande"
-
-#: keyboard.pm:273
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Orissa"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Polen (QWERTY Layout)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Polen (QWERTZ Layout)"
-
-#: keyboard.pm:277
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Pashto"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portugal"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Kanada (Québec)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Rumänien (QWERTZ)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Rumänien (QWERTY)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Russland (Phonetisch)"
-
-#: keyboard.pm:286
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Saamen (Norwegen)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr "Saamen (schwedisch/finnisch)"
-
-#: keyboard.pm:289
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Sindhi"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Slowenien"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slowakei (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slowakei (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Serbien (Kyrillisches Layout)"
-
-#: keyboard.pm:298
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Syrien"
-
-#: keyboard.pm:299
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Syrien (Phonetisch)"
-
-# drakfw:278 (Neuse
-#: keyboard.pm:300
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Telugu"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamilisch (TSCII Layout)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamilisch (Schreibmaschine)"
-
-#: keyboard.pm:304
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Thailändisch (Kedmanee)"
-
-#: keyboard.pm:305
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Thailändisch (TIS-820)"
-
-#: keyboard.pm:307
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Thailändisch (Pattachote)"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Tadschikistan"
-
-#: keyboard.pm:315
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Turkmenisch"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Türkei (traditionelles „F“ Modell)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Türkei (modernes „Q“ Modell)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ukraine"
-
-#: keyboard.pm:322
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Urdu"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "Vereinigte Staaten von Amerika (international)"
-
-#: keyboard.pm:325
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Usbekistan (Kyrillisches Layout)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnam QWERTY („number row“)"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Jugoslawien (Lateinisches Layout)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "AltGr-Taste"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Beide Umschalttasten gleichzeitig"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Strg und Umschalttaste gleichzeitig"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "CapsLock Taste"
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Shift und CapsLock gleichzeitig"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Strg und Alt gleichzeitig"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt und Umschalttaste gleichzeitig"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Menütaste"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Linke „Windows“-Taste"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Rechte „Windows“-Taste"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Beide Steuerungstasten gleichzeitig"
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Beide ALT-Tasten gleichzeitig"
-
-#: keyboard.pm:347
-#, c-format
-msgid "Left Shift key"
-msgstr "Linke Umschalt-Taste"
-
-#: keyboard.pm:348
-#, c-format
-msgid "Right Shift key"
-msgstr "Rechte Shift-Taste"
-
-#: keyboard.pm:349
-#, c-format
-msgid "Left Alt key"
-msgstr "Linke Alt-Taste"
-
-#: keyboard.pm:350
-#, c-format
-msgid "Left Control key"
-msgstr "Linke STRG Taste"
-
-#: keyboard.pm:351
-#, c-format
-msgid "Right Control key"
-msgstr "Rechte STRG-Taste"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Hier können Sie die Taste, bzw Tastenkombination wählen, \n"
-"mit der Sie zwischen verschiedenen Tastaturbelegungen \n"
-"umschalten können, etwa zwischen deutschem und US-Layout."
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-"Diese Einstellung wird nach der Installation aktiviert.\n"
-"Während der Installation, benutzen Sie die rechte STRG-Taste,\n"
-"um zwischen den verschiedenen Tastatur Layouts zu wechseln."
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andorra"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Vereinigte arabische Emirate"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afghanistan"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigua und Barbuda"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Anguilla"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albanien"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Armenien"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Niederländische Antillen"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angola"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antarktis"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Argentinien"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Samoa"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Aruba"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Aserbaidschan"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnien-Herzegovina"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbados"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladesch"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bulgarien"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Bahrain"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benin"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunei "
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivien"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahamas"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Butan"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Bouvet-Insel"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Botswana"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Weißrussland"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Belize"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Cocos (Keeling) Inseln"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinshasa)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Zentralafrikanische Republik"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazzaville)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Elfenbeinküste"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Cook-Inseln"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Chile"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "China"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Kolumbien"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Serbien & Montenegro"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Kuba"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Kap Verde"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Osterinsel"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Zypern"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Djibouti"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominikanische Republik"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Dominikanische Republik"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Algerien"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ecuador"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Ägypten"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Westsahara"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritrea"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Äthiopien"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fidschi"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falkland Inseln"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Mikronesien"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Faröische Inseln"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gabun"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Großbritannien"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenada"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Georgien"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Französisch-Guiana"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Ghana"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Grönland"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gambia"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Guinea"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Gouadeloupe"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Äquatorial-Guinea"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "South Georgia und die South Sandwich Islands"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Guatemala"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Guam"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Guinea-Bissau"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Guyana"
-
-#: lang.pm:286
-#, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Hong Kong SAR (China)"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard Island und McDonald Island"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Kroatien"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haiti"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonesien"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Indien"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britisches Territorium im Indischen Ozean"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Irak"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Iran"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Island"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamaika"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Jordanien"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenia"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgisistan"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Kambodscha"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Komoren"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "St. Kitts und Nevis"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Nordkorea"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Korea"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kuwait"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Cayman-Inseln"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kasachstan"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laos"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Libanon"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "St. Lucia"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liechtenstein"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanka"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Liberia"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesotho"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Litauen"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Luxemburg"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Litauen"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Lybien"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Marokko"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monaco"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldawien"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagaskar"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Marshall Inseln"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Mazedonien"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Mali"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Burma"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongolei"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Nördliche Mariannen-Inseln"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martinique"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Mauretanien"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malta"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Mauritius"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Malediven"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malawi"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Mexiko"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malaysia"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mosambik"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibia"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Neukaledonien"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Niger"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolkinsel"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Nigeria"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nicaragua"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepal"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauru"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Oman"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panama"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Peru"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Französisch Polinesien"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papua-Neuguinea"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Philippinen"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "St. Pierre und Miquelon"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitcairn"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Puerto Rico"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palästina"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paraguay"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palau"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Quatar"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Réunion"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Rumänien"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Ruanda"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Saudi Arabien"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Solomon-Inseln"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Seychellen"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sudan"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapur"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Sankt Helena"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Slowenien"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard and Jan Mayen Islands (Norwegen)"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Sierra Leone"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senegal"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somalia"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Surinam"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome und Principe"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "El Salvador"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Syrien"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks und Caicos Inseln"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Tschad"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "French Southern Territories"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Tadschikistan"
-
-# drakfw:278 (Neuse
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau (Neuseeland)"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Ost Timor"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistan"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunesien"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tonga"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Türkei"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad und Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tansania"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ukraine"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Uganda"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "United States Minor Outlying Islands"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Uruguay"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Usbekistan"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vatikan"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "St. Vincent und die Grenadinen"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Jungferninseln (britisch)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Jungfern-Inseln (U.S.)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Vietnam"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Wallis und Futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoa"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Yemen"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Mayotte (Frankreich)"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Sambia"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Simbabwe"
-
-#: lang.pm:1073
-#, c-format
-msgid "You should install the following packages: %s"
-msgstr "Sie sollten die folgenden Pakete installieren: %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Willkommen zu %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Schleife bem Einbinden %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Entfernen Sie erst die Logischen Medien\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Parameter"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr "KEINER"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "Module configuration"
-msgstr "Modul-Konfiguration"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Sie können alle Modulparamerter hier einstellen."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Schnittstelle(n) %s gefunden"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Verfügen Sie über weitere?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Verfügen Sie über %s Schnittstellen?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Hardware-Informationen anzeigen"
-
-#: modules/interactive.pm:82
-#, c-format
-msgid "Installing driver for USB controller"
-msgstr "Installiere den Treiber für den USB-Controller"
-
-#: modules/interactive.pm:83
-#, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Installiere den Treiber für den Firewire-Controller %s"
-
-#: modules/interactive.pm:84
-#, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Installiere den Treiber für den Festplatten-Controller %s"
-
-#: modules/interactive.pm:85
-#, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Installiere den Treiber für den Ethernet-Controller %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Installiere den Treiber für die %s Karte %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(Modul %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Sie können nun die Optionen für Modul %s angeben.\n"
-"Denken Sie daran, dass Adressen mit „0x“ beginnen müssen, etwa „0x300“"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Sie müssen nun die Optionen für Modul %s angeben.\n"
-"Optionen haben die Form „name=wert name2=wert2“.\n"
-"Beispielsweise: „io=0x300 irq=7“"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Modul-Optionen:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Welchen %s-Treiber soll ich versuchen?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"In einigen Fällen benötigt der „%s“ Treiber zusätzliche Informationen,\n"
-"um korrekt zu funktionieren, meistens sollte er jedoch auch ohne \n"
-"funktionieren. Wollen Sie solche Informationen angeben oder es dem Treiber "
-"überlassen, nach geeigneten Parametern zu suchen? (Das Austesten durch den "
-"Treiber kann in seltenen Fällen zum „Hängenbleiben“ des Rechners führen, was "
-"jedoch keine Hardwareschäden nach sich ziehen sollte.)"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Automatische Erkennung"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Optionen angeben"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Laden von Modul %s schlug fehl.\n"
-"Wollen Sie es erneut mit anderen Parametern versuchen?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "eine Nummer"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d durch Kommas getrennte Nummern"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d durch Kommas getrennte Textfelder"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "durch Kommas getrennte Nummern"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "durch Kommas getrennte Textfelder"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Maus"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Standard"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MausMan/FirstMaus (Seriell)"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generische PS2 Rad-Maus"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Automatisch"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Maus"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMaus"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 Taste"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generische 2 Tasten Maus/usr/share/sane/firmware"
-
-#: mouse.pm:50 mouse.pm:59
-#, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Generische 3 Tasten Maus mit Mausrad Emulation"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Rad"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "Seriell"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generische 3 Tasten Maus"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMaus"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MausMan/FirstMaus"
-
-#: mouse.pm:62
-#, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MausMan mitMausrad Emulation"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Maus-Systeme"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Serie"
-
-#: mouse.pm:66
-#, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Serie mit Mausrad Emulation"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MausMan+/FirstMaus+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Serie"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Maus (Seriell, alter C7 Typ)"
-
-#: mouse.pm:72
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Maus (Seriell, alter C7 Typ) mit Mausrad Emulation"
-
-#: mouse.pm:74
-#, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Maus mit Mausrad Emulation"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "Bus-Maus"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 Tasten"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 Tasten"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "3 Tasten mit Mausrad Emulation"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Universell"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr "Einige PS/2 & USB Mäuse"
-
-#: mouse.pm:89
-#, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Xbox Controller S"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "keine"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Keine Maus"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr "Synaptics Touchpad"
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Bitte testen Sie Ihre Maus"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Um Ihre Maus zu aktivieren,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEGEN SIE IHR MAUS-RAD!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "PPPOE verwenden"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "PPTP verwenden"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "DHCP verwenden"
-
-#: network/adsl.pm:22
-#, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel Speedtouch USB"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, c-format
-msgid " - detected"
-msgstr "- gefunden"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem-USB (verwendet PPPoA)"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem-USB (verwendet DHCP)"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Internetverbindung"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"Der gebräuchlichste Weg mit ADSL eine Verbindung aufzubauen ist pppoe.\n"
-"Einige Verbindungen benutzen jedoch PPTP, andere DHCP.\n"
-"Wenn Sie nicht wissen was Sie brauchen, wählen Sie „pppoe verwenden“"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, c-format
-msgid "ADSL connection type:"
-msgstr "Art der ADSL-Verbindung:"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Webserver"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Domänen-Namenserver (DNS)"
-
-#: network/drakfirewall.pm:22
-#, c-format
-msgid "SSH server"
-msgstr "SSH-Server"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "FTP-Server"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "E-Mailserver"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "POP und IMAP-Server"
-
-#: network/drakfirewall.pm:42
-#, c-format
-msgid "Telnet server"
-msgstr "Telnet-Server"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr "Windows-Dateifreigabe (SMB)"
-
-#: network/drakfirewall.pm:54
-#, c-format
-msgid "CUPS server"
-msgstr "CUPS-Server"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Echo-Anfrage (Ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr "BitTorrent"
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"DrakFirewall-Konfigurator\n"
-"\n"
-"Hiermit konfigurieren Sie eine persönliche Firewall für diesen\n"
-"Mandriva Linux-Rechner. Sollten Sie an einer speziellen ausgereiften\n"
-"Firewall-Lösung interessiert sein, schauen Sie sich nach der speziell\n"
-"dafür entwickelten Mandriva Security-Firewall-Distribution um."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"DrakFirewall-Konfigurator\n"
-"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
-"mit DrakConnect eingerichtet haben, bevor Sie fortfahren."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Auf welche Dienste darf aus dem Internet zugegriffen werden?"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Sie können verschiedene Ports angeben. \n"
-"Korrekte Beispiele sind: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Für weitere Informationen schauen Sie in „/etc/services“."
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Angabe eines ungültigen Ports: „%s“.\n"
-"Das Format lautet: „port/tcp“ oder „port/udp“, \n"
-"wobei Port eine Zahl zwischen 1 und 65535 ist.\n"
-"\n"
-"Sie können auch einen Portbereich (z.B. 24300:24350/udp) angeben."
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Alles (Keine Firewall)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Andere Ports"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr "Nicht aufgeführt - manuell eintragen"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Keine Ahnung"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Manuell"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr "Bitte wählen Sie den Windowstreiber (.inf Datei)"
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, c-format
-msgid "Manual choice"
-msgstr "Manuelle Auswahl"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-Karte"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Manuelle Konfiguration"
-
-#: network/netconnect.pm:105
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Automatische IP (BOOTP/DHCP)"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr "Automatische IP (BOOTP/DHCP/Zeroconf)"
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokoll für den Rest der Welt"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europäisches Protokoll (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokoll für den Rest der Welt \n"
-"ohne D-Kanal (Leased Lines)"
-
-#: network/netconnect.pm:153
-#, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel Speedtouch USB Modem"
-
-#: network/netconnect.pm:154
-#, c-format
-msgid "Sagem USB modem"
-msgstr "Sagem USB Modem"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr "Bewan-Modem"
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr "ECI-Hi-Focus-Modem"
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr "Dynamic Host Configuration Protocol (DHCP)"
-
-#: network/netconnect.pm:161
-#, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Manuelle TCP/IP Konfiguration"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr "Point to Point Tunneling Protocol (PPTP)"
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr "PPP over Ethernet (PPPoE)"
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr "PPP over ATM (PPPoA)"
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr "DSL über CAPI"
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Überbrücktes Ethernet LLC"
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Überbrücktes Ethernet VC"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr "Routed IP LLC"
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr "Routed IP VC"
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr "PPPoA LLC"
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr "PPPoA VC"
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Skript-basiert"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Terminal-basiert"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, c-format
-msgid "Network & Internet Configuration"
-msgstr "Netzwerk & Internet konfigurieren"
-
-#: network/netconnect.pm:300
-#, c-format
-msgid "(detected on port %s)"
-msgstr "(gefunden an Port %s)"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected %s)"
-msgstr "(%s gefunden)"
-
-#: network/netconnect.pm:302
-#, c-format
-msgid "(detected)"
-msgstr "(gefunden)"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "LAN-Verbindung"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Wireless Verbindung"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL-Verbindung"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Kabel-Verbindung"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN-Verbindung"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Modem-Verbindung"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Wählen Sie die Verbindung, die Sie konfigurieren wollen"
-
-#: network/netconnect.pm:334
-#, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"Wir werden nun die Verbindung %s konfigurieren.\n"
-"\n"
-"\n"
-"Wählen Sie „%s“, um fortzufahren."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Verbindungskonfiguration"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr ""
-"Bitte füllen Sie die folgen Felder aus \n"
-"bzw. makieren Sie die korrekten Angaben"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "Karten-IRQ"
-
-# Speicher ?
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Karten Mem (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "Karten-E/A"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "Karten-E/A_0"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "Karten-E/A_1"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Ihre eigene Telefonnummer"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Name des Providers (z.B. provider.net) "
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Telefonnummer des Providers"
-
-#: network/netconnect.pm:358
-#, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "Erster DNS des Providers (optional)"
-
-#: network/netconnect.pm:359
-#, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "Zweiter DNS des Providers (optional)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Wählmodus"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Verbindungsgeschwindigkeit"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Verbindungs-Timeout (in Sec)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Benutzername (Login)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Passwort"
-
-#: network/netconnect.pm:382
-#, c-format
-msgid "Cable: account options"
-msgstr "Kabel: Kontoeinstellungen"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr "Benutze BPALogin (Für Telstra nötig)"
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, c-format
-msgid "Select the network interface to configure:"
-msgstr "Wählen Sie die Netzwerkkarte zum konfigurieren"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Netz-Gerät:"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Externes ISDN-Modem"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Wählen Sie ein Gerät!"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN-Konfiguration"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Welchen Kartentyp haben Sie?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Falls Sie eine ISA-Karte besitzen, sollten die Einstellungen auf dem "
-"nächsten Schirm korrekt sein.\n"
-"\n"
-"Falls Sie eine PCMCIA-Karte besitzen, müssen Sie IRQ und E/A-Bereich Ihrer "
-"Karte kennen.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Fortfahren"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Abbruch"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Welche der folgenden ist Ihre ISDN-Karte?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-"Für dieses Modem ist ein CAPI-Treiber verfügbar. Dieser CAPI-Treiber bietet "
-"mehr Möglichkeiten als der freie Treiber (z.B. das Senden von Faxen). "
-"Welchen Treiber wollen Sie verwenden?"
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Treiber"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Welches Protokoll wollen Sie verwenden?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protokoll"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Wählen Sie Ihren Netzanbieter.\n"
-"Sollte er nicht aufgeführt sein, wählen Sie „Nicht aufgeführt“"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, c-format
-msgid "Provider:"
-msgstr "Provider:"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Ihr Modem wird nicht durch das System unterstützt.\n"
-"Schauen Sie unter http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, c-format
-msgid "Select the modem to configure:"
-msgstr "Zu konfigurierendes Modem auswählen:"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bitte wählen Sie den seriellen Anschluss, an dem Ihr Modem hängt."
-
-#: network/netconnect.pm:658
-#, c-format
-msgid "Select your provider:"
-msgstr "Wählen Sie ihren Anbieter:"
-
-#: network/netconnect.pm:682
-#, c-format
-msgid "Dialup: account options"
-msgstr "Einwahl: Kontodaten"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Name der Verbindung"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Telefonnummer"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Login ID"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, c-format
-msgid "Dialup: IP parameters"
-msgstr "Verbindungsaufbau: IP Parameter"
-
-#: network/netconnect.pm:705
-#, c-format
-msgid "IP parameters"
-msgstr "IP Parameter"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP-Adresse"
-
-#: network/netconnect.pm:707
-#, c-format
-msgid "Subnet mask"
-msgstr "Subnetzmaske"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr "Verbindungsaufbau: DNS Parameter"
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Name der Domäne"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Erster DNS-Server (optional)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Zweiter DNS-Server (optional)"
-
-#: network/netconnect.pm:726
-#, c-format
-msgid "Set hostname from IP"
-msgstr "Setze Name des Hosts von IP Adresse"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Gateway"
-
-#: network/netconnect.pm:739
-#, c-format
-msgid "Gateway IP address"
-msgstr "Gateway IP-Adresse"
-
-#: network/netconnect.pm:775
-#, c-format
-msgid "ADSL configuration"
-msgstr "ADSL-Konfiguration"
-
-#: network/netconnect.pm:819
-#, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Bitte wählen Sie Ihren ADSL-Anbieter."
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-"Sie brauchen den Alcatel Microcode\n"
-"Sie können diesen jetzt von Diskette oder einer Windows Partition laden\n"
-"oder diesen Schritt überspringen und es später machen."
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, c-format
-msgid "Use a floppy"
-msgstr "Benutze eine Diskette"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, c-format
-msgid "Use my Windows partition"
-msgstr "Windows-Partition benutzen"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr "Später"
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr "Kopieren der Firmware fehlgeschlagen, Datei %s nicht gefunden"
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr "Kopieren der Firmware erfolgreich"
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"Sie brauchen den Alcatel-Mikrocode.\n"
-"Laden Sie es sich von\n"
-"%s\n"
-"herunter und kopieren Sie die Datei „mgmt.o“\n"
-"nach „/usr/share/speedtouch“"
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr "Virtuelle Pfad-ID (VPI):"
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr "Virtual Circuit ID (VCI):"
-
-#: network/netconnect.pm:972
-#, c-format
-msgid "Encapsulation:"
-msgstr "Einkapselung"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-"Das ECI-Hi-Focus-Modem kann aufgrund eines binären Treiberproblems\n"
-"nicht unterstützt werden.\n"
-"\n"
-"Sie können einen Treiber finden unter http://eciadsl.flashtux.org/"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr "Treiber von Hand laden"
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr "Verwende einen Windowstreiber (mit ndiswrapper)"
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, c-format
-msgid "Could not install the %s package!"
-msgstr "Konnte das Paket %s nicht installieren!"
-
-#: network/netconnect.pm:1048
-#, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Zeroconf-Namensauflösung"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Konfiguriere Netzwerkgerät %s (Treiber %s)."
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bitte geben Sie die IP-Parameter dieser Maschine ein.\n"
-"Jeder Eintrag muss als dezimale IP-Adresse in Punktschreibweise \n"
-"angegeben werden (etwa  „192.168.1.42“)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Name des Hosts über DHCP zuweisen"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, c-format
-msgid "DHCP host name"
-msgstr "DHCP-Rechnername"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Netzmaske"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Netzwerkkarten-ID überwachen (sinnvoll für Laptops)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, c-format
-msgid "Network Hotplugging"
-msgstr "Netzwerk Hotplugging"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Beim Systemstart aktivieren"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, c-format
-msgid "Metric"
-msgstr "Metrisch"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP-Client"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "DHCP-Zeitschranke (in Sekunden)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "DNS-Server via DHCP bekommen"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr "YP-Server via DHCP bekommen"
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr "NTPD-Server via DHCP bekommen"
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Die IP-Adresse sollte etwa die Form „192.168.1.42“ haben!"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Die Netzmaske sollte das Format 255.255.224.0 haben"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr "Warnung : IP-Adresse %s ist üblicherweise reserviert !"
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr "%s bereits anderweitig genutzt\n"
-
-#: network/netconnect.pm:1167
-#, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Wählen Sie einen ndiswrapper-Treiber"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Install a new driver"
-msgstr "Einen neuen Treiber installieren"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr ""
-"Bitte geben Sie die Parameter für die drahtlose Verbindung dieser Karte ein:"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, c-format
-msgid "Operating Mode"
-msgstr "Betriebsmodus"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr "Spontan"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Managed"
-msgstr "Geführt"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Master"
-msgstr "Master"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Repeater"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Sekundär"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Automatisch"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr "Netzwerkname (ESSID)"
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, c-format
-msgid "Network ID"
-msgstr "Netzwerk-ID"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr "Übertragungsfrequenz:"
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr "Empfindlichkeitsschwelle"
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr "Bitrate (in b/s)"
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr "RTS/CTS"
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-"RTS/CTS fügt einen Handshake vor jeder Paketübertragung ein, um "
-"sicherzustellen, dass der Kanal sauber ist. Dies erhöht den Aufwand, aber "
-"verbessert die Leistung bei versteckten Knoten oder einer großen Anzahl "
-"aktiver Knoten. Dieser Parameter setzt die Größe des kleinsten Paketes, für "
-"das der Knoten ein RTS sendet. Die Angabe der maximalen Paketgröße schaltet "
-"dieses Verfahren aus. Sie können diesen Parameter auch auf „auto“, „fest“ "
-"oder „aus“ stellen."
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, c-format
-msgid "Fragmentation"
-msgstr "Fragmentierung"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Zusätzlche Schalter für den Befehl lwconfig"
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-"Hier können Sie zusätzliche Parameter einstellen wie:\n"
-"ap, Kanal, Übertragung, enc, Leistung, Wiederholung, sens, Sendeleistung\n"
-"(Nick ist bereits als Hostname gesetzt).\n"
-"Die iwconfig(8) Manpages liefern weitere Informationen."
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Zusätzliche Schalter für den Befehl lwspy"
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-"lwspy setzt eine Adressliste an einer drahtlosen Netzwerk-\n"
-"schnittstelle und gibt die Verbindungsqualität für jede Adresse zurück. \n"
-"\n"
-"Diese Information ist identisch mit der aus /proc/net/wireless :\n"
-"Verbindungsqualität, Signalstärke und Rauschpegel.\n"
-"\n"
-"Die iwpspy(8) Manpages liefern weitere Informationen."
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Extra-Schalter für den Befehl lwpriv"
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-"lwpriv setzt optionale (private) Parameter für die drahtlose "
-"Netzwerkschnittstelle.\n"
-"\n"
-"lwpriv nimmt die zum jeweiligen Treiber gehörigen Parameter und "
-"Einstellungen vor \n"
-"(gegenüber iwconfig, was allgemeine Parameter behandelt.).\n"
-"\n"
-"Theoretisch sollte die Dokumentation jedes Treibers die spezifischen "
-"Parameter\n"
-"und deren Auswirkung erläutern.\n"
-"\n"
-"Die Manpages zu iwpriv(8) geben weitere Informationen."
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Die Frequenz sollte entweder eine Mengeneinheit aus ‚K‘, ‚M‘ und ‚G‘ nutzen "
-"(etwa „2.46G“ für 2,46GHz) oder die entsprechende Anzahl Nullen angehängt "
-"werden."
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-"Die Rate sollte entweder eine Mengeneinheit aus ‚K‘, ‚M‘ und ‚G‘ nutzen "
-"(etwa „11M“ für 11M) oder die entsprechende Anzahl Nullen angehängt werden."
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Bitte geben Sie ihren Rechnernamen an.\n"
-"Ihr Rechnername sollte auch die Domäne beinhalten,\n"
-"etwa „meinrechner.meineabteilung.meinefirma.de“.\n"
-"Falls Sie ein Gateway verwenden, sollten Sie auch dessen IP-Adresse angeben."
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr "Zuguterletzt kann die DNS Server IP Adresse eingegeben werden."
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, c-format
-msgid "Host name (optional)"
-msgstr "Rechnername (optional)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Rechnername"
-
-#: network/netconnect.pm:1370
-#, c-format
-msgid "DNS server 1"
-msgstr "DNS-Server 1"
-
-#: network/netconnect.pm:1371
-#, c-format
-msgid "DNS server 2"
-msgstr "DNS-Server 2"
-
-#: network/netconnect.pm:1372
-#, c-format
-msgid "DNS server 3"
-msgstr "DNS-Server 3"
-
-#: network/netconnect.pm:1373
-#, c-format
-msgid "Search domain"
-msgstr "Suchdomäne"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-"Standardmäßig wird die Suchdomäne aus dem FQDN (fully qualified domain name) "
-"erzeugt."
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (etwa %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Gateway-Gerät"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr ""
-"Die IP-Adresse des DNS-Servers sollte etwa die Form „192.168.1.42“ haben!"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Die IP-Adresse des Gateways sollte etwa die Form „192.168.1.42“ haben!"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-"Geben Sie, wenn gewünscht, einen Zeroconf Rechnernamen ein.\n"
-"Das ist der Name, den Ihr Rechner zum Bekanntgeben seiner \n"
-"freigegebenen Ressourcen verwendet, die nicht vom Netzwerk\n"
-"verwaltet werden. In den meisten Netzwerken ist das nicht nötig."
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Zeroconf-Rechnername"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "Der Zeroconf-Hostname muss einen . enthalten."
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Sie haben verschiedene Varianten eingerichtet, sich mit dem\n"
-"Internet zu verbinden. Bitte wählen Sie eine aus.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Internet-Verbindung"
-
-#: network/netconnect.pm:1432
-#, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Konfiguration ist vollständig, wollen Sie diese jetzt anwenden ?"
-
-#: network/netconnect.pm:1439
-#, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Möchten Sie Benutzern erlauben, diese Verbindung zu starten?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Möchten Sie die Verbindung beim Systemstart herstellen?"
-
-#: network/netconnect.pm:1478
-#, c-format
-msgid "Automatically at boot"
-msgstr "Automatisch beim Systemstart"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr "Durch das Net Applet in der Kontrollleiste"
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr "von Hand (die Schnittstelle wird trotzdem bei Systemstart aktiviert)"
-
-#: network/netconnect.pm:1491
-#, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Wie möchten Sie diese Verbindung wählen?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Das Netzwerk muss neu gestartet werden. Soll ich es neu starten?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Netzwerk konfigurieren"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Beim Neustart des Netzwerks trat ein Fehler auf: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Möchten Sie jetzt versuchen eine Internetverbindung aufzubauen?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Ich teste gerade Ihre Verbindung..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Das System ist jetzt mit dem Internet verbunden."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Aus Sicherheitsgründen wird die Verbindung nun unterbrochen."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Das System scheint nicht mit dem Internet verbunden zu sein.\n"
-"Versuchen Sie noch einmal Ihre Verbindung zu konfigurieren."
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Herzlichen Glückwunsch, die Netzwerk-/Internet-Einrichtung ist beendet.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Es ist sehr empfehlenswert, im Anschluss Ihre X-Oberfläche\n"
-"neu zu starten, um Probleme, die durch die Änderung des\n"
-"Rechnernamens hervorgerufen werden, zu vermeiden."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Während der Konfiguration traten Fehler auf.\n"
-"Kontrollieren Sie Ihre Verbindung mit „net_monitor“ oder dem Mandriva "
-"Kontrollzentrum. Falls die Verbindung nicht funktioniert, sollten Sie erneut "
-"die Konfiguration starten."
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Da Sie eine Netzwerkinstallation durchführen, ist Ihr Netzwerk bereits\n"
-"konfiguriert. Wählen Sie „OK“, um diese Einstellung beizubehalten oder\n"
-"„Abbrechen“, um Ihre Internet- und Netzwerk-Konfiguration neu zu\n"
-"konfigurieren.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr "Ein unerwarteter Fehler ist aufgetreten:/n %s"
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Proxies einstellen"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP-Proxy"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP-Proxy"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy muss „http://...“ sein"
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Die URL muss mit „http://“ oder „ftp://“ beginnen"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Ich habe eine Firewall-Konfiguration gefunden!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"WARNUNG: Ich habe eine Firewall-Konfiguration gefunden. \n"
-"Möglicherweise müssen Sie nach der Installation einige Einstellungen \n"
-"von Hand vornehmen."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-"Bitte geben Sie den Namen der Schnittstelle ein, über die Sie ins Internet "
-"gehen.\n"
-"\n"
-"Beispiele:\n"
-"\t\tppp+ für Modem- oder DSL-Verbindungen, \n"
-"\t\teth0, oder eth1 für eine Kabel-Verbindung, \n"
-"\t\tippp+ für eine ISDN-Verbindung.\n"
-
-#: network/tools.pm:190
-#, c-format
-msgid "Insert floppy"
-msgstr "Bitte Diskette einlegen"
-
-#: network/tools.pm:191
-#, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr ""
-"Legen Sie eine FAT-formatierte Diskette in Laufwerk %s mit %s im "
-"Wurzelverzeichnis ein und drücken %s"
-
-#: network/tools.pm:196
-#, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Fehler beim Zugriff auf Diskette, kann Gerät %s nicht einbinden"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "Fehler beim Einhängen: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Diese Rechnerarchitektur kennt keine erweiterten Partitionen"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Sie haben einen unbenutzten Bereich in Ihrer Partitionstabelle, \n"
-"den ich nicht ansprechen kann. Die einzige Lösung ist, dass Sie \n"
-"Ihre primären Partitionen so verschieben, dass der Bereich direkt \n"
-"neben der erweiterten Partition zu liegen kommt."
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaurieren aus der Datei %s schlug fehl: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Fehlerhafte Backup-Datei"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Fehler beim Schreiben in Datei %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Mit Ihrer Platte stimmt etwas nicht!\n"
-"Der vorgenommene Integritätstest schlug fehl.\n"
-"Das bedeutet, dass jeder Schreibvorgang auf der Platte zu zufälligen oder "
-"beschädigten Daten führen wird."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "unbedingt notwendig"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "wichtig"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "sehr angenehm"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "angenehm"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "eventuell"
-
-#: pkgs.pm:481
-#, c-format
-msgid "Downloading file %s..."
-msgstr "Lade Datei %s herunter..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(an %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(an diesem Rechner)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, c-format
-msgid "Configured on other machines"
-msgstr "Auf anderen Rechnern konfiguriert"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Auf CUPS-Server „%s“"
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Standard)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Print, Do not Queue"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Common Unix Printing System (entfernter Server)"
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "Entferntes CUPS"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Unbekanntes Modell"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Lokaler Drucker"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Entfernter Drucker"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Drucker an CUPS-Server auf der Gegenseite"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Drucker an LPD-Server im Netzwerk"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netzwerkdrucker (TCP/Socket)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Drucker an SMB/Windows 9x/ME/NT"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Drucker an NetWare-Server"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Druckeranschluss URI"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Den Auftrag an ein Kommando weiterleiten"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "empfohlen"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Unbekanntes Modell"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, c-format
-msgid "Configured on this machine"
-msgstr "An diesem Rechner eingerichtet"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " an Parallelport \\#%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", USB-Drucker #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", USB-Drucker"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", HP-Drucker am Parallelport"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", HP-Drucker an USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", HP-Drucker an HP JetDirect"
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", HP-Drucker"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", Multifunktionsgerät am Parallelport #%s"
-
-#: printer/main.pm:384
-#, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", Multifunktionsgerät am Parallelport "
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", USB-Multifunktionsgerät"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", Multifunktionsgerät am HP JedDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", Multifunktionsgerät"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", drucken auf %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "auf LDP-Server „%s“, Drucker „%s“"
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP-Rechner „%s“, Port %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "auf SMB/Windows-Server „%s“, Freigabe „%s“"
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "auf dem Novell-Server „%s“, Drucker „%s“"
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", mittels Kommando „%s“"
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Parallelport #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "USB-Drucker #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "USB-Drucker"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "HP-Drucker an einem Parallelport"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "HP-Drucker an USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr "HP-Drucker auf HP JetDirect"
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "HP-Drucker"
-
-#: printer/main.pm:449
-#, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Multifunktionsgerät am Parallelport #%s"
-
-#: printer/main.pm:452
-#, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "Multifunktionsgerät am Parallelport"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr "USB-Multifunktionsgerät"
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr "Multifunktionsgerät am HP JetDirect"
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr "Multifunktionsgerät"
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Druckt auf %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "LDP-Server „%s“, Drucker „%s“"
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP-Rechner „%s“, Port %s"
-
-#: printer/main.pm:473
-#, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "SMB/Windows-Server „%s“, Freigabe „%s“"
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Novell Server „%s“, Drucker „%s“"
-
-#: printer/main.pm:481
-#, c-format
-msgid "Uses command %s"
-msgstr "benutzt Kommando „%s“"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Rohdaten-Drucker (kein Treiber)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Lokale Netzwerke"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Schnittstelle „%s“"
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Netzwerk %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Rechner %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Port %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-"Der HP LaserJet 1000 benötigt nach dem Starten ein hochzuladendes Firmware. "
-"Laden Sie das Windows-Treiberpaket von der der HP-Homepage (das Firmware auf "
-"der Treiber-CD des Druckers funktioniert nicht!) und entnehmen die das "
-"Firmware daraus, indem sie die selbst-entpackende „.exe“-Datei mit „unzip“ "
-"entpacken und nach der „sihp1000.img“-Datei suchen. Kopieren Sie diese Datei "
-"in das „/etc/printer“-Verzeichnis. Dort wird es vom automatisch vom "
-"Druckerskript gefunden und hochgeladen, wenn der Drucker eingeschaltet "
-"wird.\n"
-
-#: printer/printerdrake.pm:67
-#, c-format
-msgid "CUPS printer configuration"
-msgstr "CUPS-Drucker-Konfiguration"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Hier können Sie einstellen, ob die Drucker, die an diesem Rechner hängen, "
-"für andere Rechner nutzbar sein sollen und falls ja, für welche."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Sie können hier entscheiden, ob Drucker von anderen Rechnern automatisch auf "
-"diesem Rechner zur Verfügung gestellt werden sollen."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Die Drucker dieses Rechners sind für andere Rechner nutzbar"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Automatische Suche nutzbarer Drucker auf anderen Rechnern"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Gemeinsamer Druckerzugriff auf Rechnern/Netzwerken:"
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Angepasste Konfiguration"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, c-format
-msgid "No remote machines"
-msgstr "Keine Netzwerkrechner"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Weitere CUPS-Server: "
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Um auf die Drucker entfernter CUPS-Server Zugriff zu erhalten müssen Sie nur "
-"die „Finde automatisch verfügbare Drucker an enfernten Rechnern“-Option "
-"aktivieren; Die CUPS-Server informieren Ihren Rechner automatisch über ihre "
-"Drucker. Alle aktuell bekannten Drucker werden im „Entfernte Drucker“-"
-"Abschnitt im Hauptfenster von Printerdrake aufgelistet. Falls Ihr CUPS-"
-"Server sich nicht im lokalen Netz befindet müssen die dessen IP-Adresse und "
-"ggf. die Port-Nummer hier eingeben, um die Information von diesem Server zu "
-"erhalten."
-
-#: printer/printerdrake.pm:115
-#, c-format
-msgid "Japanese text printing mode"
-msgstr "Druck Modus für Japanischen Text"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-"Aktivieren dieser Option erlaubt es Ihnen einfachen Text in der japanischen "
-"Sprache zu drucken. Benutzen Sie diese Funktion nur, wenn Sie wirklich "
-"japanischen Text drucken wollen, wenn diese Funktion aktiviert ist, können "
-"Sie keine Akzente in Latin Schriftarten mehr drucken und auch die Abstände, "
-"die Buchstaben Grösse, etc. nicht mehr anpassen. Diese Einstellung betrifft "
-"nur Drucker auf diesem Rechner. Wenn Sie japanischen Text auf einem Drucker "
-"an einem entfernten Computer drucken wolllen, müssen Sie diese Funktion auf "
-"diesem Computer aktivieren."
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Automatische Korrektur der CUPS-Konfiguration"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Wenn diese Option eingeschaltet ist gewährleistet CUPS bei jedem Start, "
-"dass \n"
-"\n"
-"- wenn LPD/LPRng installiert ist, /etc/printcap nicht von CUPS überschrieben "
-"wird\n"
-"\n"
-"- eine Datei /etc/cups/cupsd.conf erzeugt wird wenn sie fehlt\n"
-"\n"
-"- dass der Servername beim verteilen nicht „localhost“ enthält.\n"
-"\n"
-"Falls einige dieser Maßnahmen bei Ihnen zu Problemen führen stellen Sie "
-"diese Option ab./nDann müssen Sie aber selbst auf diese Punkte achten."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr "Entfernter CUPS-Server und kein lokaler CUPS Dämon"
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "An"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Aus"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"In diesem Modus wird der lokale CUPS Dämon gestoppt und alle Druckaufträge "
-"gehen direkt zum unten angegebenen Server. Beachten Sie bitte, dass es dann "
-"nicht möglich ist, lokale Druckerwarteschlangen einzurichten und dass wenn "
-"der angegebene Server heruntergefahren ist, von dieser Maschine überhaupt "
-"nicht gedruckt werden kann."
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Gemeinsamer Zugriff auf lokale Drucker"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Das sind die Rechner und Netzwerke, für die die lokalen Drucker zugänglich "
-"sein sollen:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Hinzufügen eines Rechners/Netzwerks"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Markierte Rechner/Netzwerke bearbeiten"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Löschen der markierten Rechner/Netzwerke"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "IP-Adresse des Rechners/Netzwerks:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-"Wählen Sie Netzwerke bzw. Rechner, denen lokale Drucker bekannt gemacht "
-"werden sollen:"
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "Die Rechner/Netzwerk-IP-Adresse fehlt!"
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Die eingegebene Rechner/Netzwerk-Information ist nicht korrekt.\n"
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Beispiele für korrekte IPs:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"IP-Adresse bzw. Netzwerk sind bereits in der Liste, \n"
-"Sie können sie nicht erneut hinzufügen.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Zugriff auf Drucker an entfernten CUPS-Servern"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"Fügen Sie hier die CUPS-Server hinzu, deren Drucker Sie verwenden wollen. "
-"Sie müssen dies jedoch nur tun, wenn die Server ihre Druckerinformationen "
-"nicht ins lokale Netzwerk senden (broadcast)."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Server hinzufügen"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Änderung des markierten Servers"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Löschen des markierten Servers"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-"Geben Sie die IP-Adresse und den Port des Rechners ein, dessen Drucker Sie "
-"verwenden wollen. "
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr "Wenn kein Port angegeben wird, wird Port 631 als Vorgabe genommen."
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "Die Server-IP fehlt!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Die eingegebene IP ist nicht korrekt.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Die Port Nummer muss eine ganze Zahl sein!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-"Der Server ist bereits in der Liste, er kann nicht erneut hinzugefügt "
-"werden.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Port"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "An, Name oder IP des entfernten Servers:"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "CUPS Servername oder IP-Adresse fehlt."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "PrinterDrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Lesen der Treiber-Datenbank ..."
-
-#: printer/printerdrake.pm:587
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "CUPS wird neu gestartet..."
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Wählen Sie die Drucker-Anbindung"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Wie ist der Drucker mit Ihrem Computer verbunden?"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Drucker an entfernten CUPS-Servern müssen hier nicht konfiguriert werden; "
-"diese Drucker werden automatisch erkannt."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-"\n"
-"WARNUNG: Keine lokale Netzwerkverbindung aktiv, entfernte Drucker können "
-"weder entdeckt noch getestet werden!"
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr "Autoerkennung von Druckern (Lokal, TCP/Socket, SMB und Geräte-URI)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr "Zeitschranke zur Autoerkennung von Netzwerkdruckern ändern"
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-"Geben Sie hier die Zeitschranke zur Autoerkennung von Netzwerkdruckern (in "
-"Millisekunden) ein. "
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-"Je größer Sie diesen Wert wählen, desto zuverlässiger wird die Erkennung von "
-"Netzwerkdruckern sein. Jedoch wird der Scan länger dauern, besonders dann, "
-"wenn es viele Maschinen mit einer lokalen Firewall im Netzwerk gibt. "
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Die Zeitschranke muss eine positive Ganzzahl sein!"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Untersuchung Ihres Rechners ..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "und ein unbekannter Drucker"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "und %d unbekannte Drucker"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Die folgenden Drucker\n"
-"\n"
-"%s%s\n"
-"sind direkt an Ihr System angeschlossen."
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Die folgenden Drucker\n"
-"\n"
-"%s%s\n"
-"sind direkt an Ihr System angeschlossen."
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Der folgende Drucker\n"
-"\n"
-"%s%s\n"
-"ist direkt an Ihr System angeschlossen"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Ich konnte einen unbekannten Drucker direkt an Ihrem Rechner finden."
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Ich konnte %d unbekannte Drucker direkt an Ihrem Rechner finden."
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Ich konnte keine Drucker direkt an Ihrem Rechner finden."
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr ""
-"(Stellen Sie bitte sicher, dass alle Drucker angeschlossen und eingeschaltet "
-"sind).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Wollen Sie oben aufgeführte Drucker oder Drucker im lokalen Netzwerk zum "
-"Drucken konfigurieren?\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Wollen Sie Drucker im lokalen Netzwerk zum Drucken konfigurieren?\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Wollen Sie oben aufgeführte Drucker zum Drucken konfigurieren?\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Sind Sie sicher, dass Sie mit diesem Rechner drucken wollen?\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"ANMERKUNG: Je nach Drucker und Drucksystem werden bis zu %d MB zusätzlicher "
-"Software auf Ihrem Rechner installiert."
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Suche nach neuen Druckern..."
-
-#: printer/printerdrake.pm:833
-#, c-format
-msgid "Found printer on %s..."
-msgstr "Drucker an %s gefunden..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " auf "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Auswahl des Druckermodells"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Welches Druckermodell haben Sie?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"PrinterDrake konnte Ihr Druckermodell %s nicht bestimmen. Bitte wählen Sie "
-"das richtige Modell aus der Liste aus."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Falls Ihr Drucker nicht aufgeführt ist wählen Sie bitte ein kompatibles bzw "
-"ähnliches Modell (Für Einzelheiten schauen Sie bitte in Ihr Druckerhandbuch)."
-
-#: printer/printerdrake.pm:875
-#, c-format
-msgid "Configuring printer on %s..."
-msgstr "Richte Drucker an %s ein..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfiguriere Drucker „%s“..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Drucker hinzufügen"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Willkommen zum Druckereinrichtungsassistenten\n"
-"\n"
-"Dieser Assistent hilft Ihnen lokale oder Netzwerkdrucker so einzurichten, "
-"dass dieser Rechner bzw. andere in Ihrem Netzwerk darauf drucken können.\n"
-"\n"
-"Sie werden nun nach den nötigen Informationen über den Drucker gefragt, um "
-"dann Zugriff auf Treiber,  Druckoptionen und Anschlussart zu erhalten."
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent wrid Ihnen helfen, Ihre lokalen und Netzwerkdrucker sowie "
-"Drucker an Windows-Rechnern im lokalen Netz einzurichten.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
-"müssen die Netzwerkdrucker bzw. Windows-Rechner eingeschaltet sein.\n"
-"\n"
-"Es sei angemerkt, dass die Erkennung von Netzwerkdruckern etwas länger "
-"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner hängen. Sie "
-"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
-"hängende Drucker verwenden wollen.\n"
-"\n"
-"Betätigen Sie die Schaltfläche „Weiter“, wenn Sie soweit sind, bzw. "
-"„Abbrechen“, wenn Sie keine Drucker konfigurieren wollen."
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent wird Ihnen helfen, Ihre lokalen Drucker einzurichten.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind.\n"
-"\n"
-"Betätigen Sie die Schaltfläche „Weiter“, wenn Sie soweit sind, bzw. "
-"„Abbrechen“, wenn Sie keine Drucker konfigurieren wollen."
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent möchte Ihnen helfen, Ihre(n) lokalen und Netzwerkdrucker zu "
-"konfigurieren.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind. Ebenso "
-"müssen die Netzwerkdrucker eingeschaltet und mit dem Netz verbunden sein.\n"
-"\n"
-"Es sei angemerkt, dass die Erkennung von Netzwerkdruckern etwas länger "
-"dauert, als das Finden von Druckern, die direkt an Ihrem Rechner hängen. Sie "
-"sollten daher diesen Punkt ausschalten, sofern Sie nur direkt am Rechner "
-"hängende Drucker verwenden wollen.\n"
-"\n"
-"Betätigen Sie die Schaltfläche „Weiter“, wenn Sie soweit sind, bzw. "
-"„Abbrechen“, wenn Sie keine Drucker konfigurieren wollen."
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"Willkommen zum Druckerassistenten\n"
-"\n"
-"Dieser Assistent möchte Ihnen helfen, Ihre(n) lokalen Drucker zu "
-"konfigurieren.\n"
-"\n"
-"Falls Sie Drucker haben, die direkt mit dem Rechner verbunden sind, stellen "
-"Sie sicher, dass diese richtig angeschlossen und eingeschaltet sind.\n"
-"\n"
-"Betätigen Sie die Schaltfläche „Weiter“, wenn Sie soweit sind, bzw. "
-"„Abbrechen“, wenn Sie keine Drucker konfigurieren wollen."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Selbsterkennung von direkt am Rechner angeschlossenen Druckern"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Drucker automatisch erkennen, die im lokalen Netzwerk hängen"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "Selbsterkennung von Druckern, die an Windows-Rechnern hängen"
-
-#: printer/printerdrake.pm:1151
-#, c-format
-msgid "No auto-detection"
-msgstr "Keine automatische Erkennung"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Herzlichen Glückwunsch, Ihr Drucker ist nun installiert und eingerichtet!\n"
-"\n"
-"Sie können nun mit dem „Drucken“ Befehl Ihrer Anwendungen (meistens im "
-"„Datei“-Menü zu finden) drucken.\n"
-"\n"
-"Falls Sie einen Drucker hinzufügen, entfernen oder umbenennen wollen,\n"
-"oder wenn Sie die Standardeinstellungen wie Papierschacht oder \n"
-"Druckqualität) anpassen wollen, wählen Sie „Drucker“ im „Hardware“\n"
-"Bereich des %s Kontrollzentrums."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, c-format
-msgid "Could not install the %s packages!"
-msgstr "Kann Paket nicht installieren %s"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr "Breche Windows/SMB-Server Auto-Überprüfung ab"
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Autoerkennung von Druckern"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Geräteerkennung..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", Netzwerkdrucker „%s“, Port %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", Drucker „%s“ an SMB/Windows-Server „%s“"
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "%s gefunden"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Drucker an Parallelport #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netzwerkdrucker „%s“, Port %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Drucker „%s“ am SMB/Windows-Server „%s“"
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Lokaler Drucker"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Es wurde kein lokaler Drucker erkannt! Um ihn manuell hinzuzufügen geben Sie "
-"einfach einen Geräte- oder Dateinamen in der Eingabezeile an (Parallele "
-"Anschlüsse: /dev/lp0, /dev/lp1, ..., äquivalent zu LPT1:, LPT2:, ...; Erster "
-"USB Drucker: /dev/usb/lp0, zweier USB Drucker: /dev/usb/lp1, ...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Sie müssen einen Geräte- oder Dateinamen eingeben!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Kein Drucker erkannt!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Lokale Drucker"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Vorhandene Drucker"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Der folgende Drucker wurde automatisch erkannt."
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Falls das nicht der Drucker ist, den Sie einrichten wollen, geben Sie einen "
-"Geräte- oder Dateinamen in der Eingabezeile an."
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Alternativ können Sie einen Geräte- oder Dateinamen in der Eingabezeile "
-"angeben"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Hier ist eine Liste aller automatisch erkannten Drucker."
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Bitte wählen Sie den Drucker den sie einrichten wollen oder geben Sie einen "
-"Geräte- oder Dateinamen in der Eingabezeile an."
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Bitte wählen Sie den Drucker, an den die Druckaufträge gehen sollen oder "
-"geben Sie einen Geräte- oder Dateinamen in der Eingabezeile an."
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-"Die Einrichtung des Druckers wird vollautomatisch erfolgen. Sollte Ihr "
-"Drucker nicht richtig erkannt worden sein oder wollen Sie die Einrichtung "
-"selbst vornehmen, wählen Sie „Manuelle Konfiguration“."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Im Moment ist keine alternative Möglichkeit verfügbar."
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-"Bitte wählen Sie den Drucker, den Sie einrichten wollen. Die Einrichtung "
-"wird vollautomatisch erfolgen. Sollte Ihr Drucker nicht richtig erkannt "
-"worden sein oder wollen Sie die Einrichtung selbst vornehmen, wählen Sie "
-"„Manuelle Konfiguration“."
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Bitte wählen Sie den Drucker, an den die Druckaufträge gehen sollen."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Bitte wählen Sie den Anschluss, an dem der Drucker hängt oder geben Sie "
-"einen Geräte- oder Dateinamen in der Eingabezeile an."
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Bitte wählen Sie den Anschluss, an dem Ihr Drucker hängt."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-" (Parallele Anschlüsse: /dev/lp0, /dev/lp1, ..., äquivalent zu LPT1:, "
-"LPT2:, ..., Erster USB-Drucker: /dev/usb/lp0, zweiter USB-Drucker: /dev/usb/"
-"lp1, ...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Sie müssen einen Drucker wählen/ein Gerät eingeben!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, c-format
-msgid "Aborting"
-msgstr "Abbruch"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Optionen für Netzwerk-Druckerspooler"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Um einen LPD-Drucker im Netzwerk zu verwenden, müssen Sie den Rechnernamen "
-"des Drucker-Servers sowie den Druckernamen auf diesem Server angeben, an den "
-"die Aufträge übertragen werden sollen."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Name des Netzwerkrechners"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Name des entfernten Druckers"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Der Name des Netzwerkrechners fehlt!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Der Name des Netzwerkdruckers fehlt!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Informationen"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Gefundendenes Modell: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Durchsuche Netzwerk..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", Drucker „%s“, auf Server „%s“"
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Drucker „%s“, auf Server „%s“"
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Drucker-Parameter"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Um auf einem SMB-Drucker zu drucken sind folgende Angaben erforderlich: Der "
-"SMB-Rechnername des Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers) und möglicherweise die IP-Adresse, Freigabename "
-"für den Drucker, auf den Sie zugreifen möchten, sowie entsprechender "
-"Benutzername, Passwort und Arbeitsgruppe."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-"Falls der gewünschte Drucker bereits gefunden wurde, wählen Sie ihn einfach "
-"aus der Liste unten aus und geben Sie - falls notwendig - Name, Passwort und/"
-"oder Domäne an."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "SMB-Server"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB-Server-IP"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Freigabename"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Arbeitsgruppe"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Selbst gefunden"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Sie müssen entweder den Servernamen oder seine IP-Adresse angeben!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Der Name der Samba-Freigabe fehlt!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "SICHERHEITSWARNUNG!"
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Sie sind dabei, einen Drucker einzurichten, der über ein Windows-"
-"Benutzerkonto mit Passwort druckt. Aufgrund eines Fehlers in der Architektur "
-"der Samba-Client-Software wird das Passwort im Klartext in die Kommandozeile "
-"der Samba-Komponente eingefügt, welche die zu druckenden Daten auf den "
-"Windows-Server überträgt. So ist es für jeden Benutzer möglich, das Passwort "
-"auf dem Bildschirm anzuzeigen, indem er Kommandos wie zum Beispiel „ps "
-"auxwww“ ausführt.\n"
-"\n"
-"Wir empfehlen von einer der folgenden Alternativen Gebrauch zu machen (in "
-"allen Fällen muss sichergestellt werden dass nur Maschinen des lokalen "
-"Netzwerks auf den Windows-Server zugreifen können, zum Beispiel mit Hilfe "
-"einer Firewall):\n"
-"\n"
-"Drucken Sie über ein Benutzerkonto ohne Passwort auf Ihrem Windows-Server, "
-"zum Beispiel über das „GAST“-Benutzerkonto oder über ein speziell zum "
-"Drucken eingerichtetes Benutzerkonto. Entfernen Sie nicht den Passwortschutz "
-"von einem persönlichen Benutzerkonto oder vom Administratorkonto.\n"
-"\n"
-"Richten Sie Ihren Windows-Server so ein, dass der Drucker unter dem LPD-"
-"Protokoll erreichbar ist. Dann richten sie den Drucker auf dieser Maschine "
-"mit dem Verbindungstyp „%s“ ein.\n"
-"\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Richten Sie Ihren Windows-Server so ein, dass Ihr Drucker über das IPP-"
-"Protokoll erreichbar ist und konfigurieren sie ihn auf dieser Maschine mit "
-"dem Verbindungstyp „%s“ in PrinterDrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Verbinden Sie Ihren Drucker mit einem Linux-Server und lassen Sie Ihre(n) "
-"Windows-Rechner als Client auf ihn zugreifen.\n"
-" \n"
-"Möchten Sie Ihren Drucker wirklich so einrichten, wie Sie es jetzt tun?"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Optionen für NetWare-Drucker"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Um auf einem NetWare-Drucker zu drucken sind folgende Angaben erforderlich: "
-"Name des NetWare-Drucker-Servers (entspricht nicht immer dem TCP/IP-"
-"Rechnernamen des Computers), Name der Drucker-Warteschlange, sowie falls "
-"notwendig, den entsprechenden Benutzernamen samt Passwort."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Drucker-Server"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Name der Druckerwarteschlange"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "Der NCP-Servername fehlt!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "Der NCP-Warteschlangen-Name fehlt!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", Rechner „%s“, Port %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Rechner „%s“, Port %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Optionen für TCP/Socket-Drucker"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-"Wählen Sie einen der automatisch erkannten Drucker aus der Liste oder geben "
-"Sie den Hostnamen oder die IP-Adresse und optional die Portnummer (wenn Port "
-"nicht angegeben, wird 9100 verwendet) ein."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Um einen TCP- oder Socket-Drucker verwenden zu können, müssen Sie auf alle "
-"Fälle dessen Rechnernamen, bzw. IP-Adresse - möglicherweise auch den Port - "
-"angeben. Bei HP JetDirect-Servern ist dies normalerweise die Port-Adresse "
-"9100, bei anderen Servern kann es eine andere sein. Schauen Sie im "
-"Zweifelsfall in die Unterlagen des Herstellers."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Der Rechnername, bzw die IP-Adresse des Druckers fehlt!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Rechnername/IP des Druckers"
-
-#: printer/printerdrake.pm:2012
-#, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Aktualisieren die Geräte-URI-Liste..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "Druckeranschluss URI"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Sie können hier direkt die URI eines Druckers angeben. Die URI muss den CUPS-"
-"bzw. den Foomatic-Spezifikationen genügen. Es sei hier noch angemerkt, dass "
-"nicht alle URI-Typen von allen Drucksystemem unterstützt werden."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Sie müssen eine gültige URI eingeben!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "An ein Kommando weiterleiten"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Hier können Sie einen beliebigen Befehl angeben, in den der Auftrag "
-"umgeleitet anstatt direkt zum Drucker gesendet wird."
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Kommandozeile"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr "Eine Kommandozeile muss eingegeben werden!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-"Viele HP-Druckern haben Spezialfunktionen, Wartung (Tintenfüllstand, "
-"Druckkopfausrichtung, ...) für alle nicht allzu alten Tintenstrahldrucker, "
-"Scannen auf Multifunktionsgeräten und Speicherkartenzugriff bei Druckern mit "
-"Kartenlesern. "
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-"Um auf diese Spezialfunktionen Ihres HP-Druckers zugreifen zu können, muss "
-"er mit der entsprechenden Software eingerichtet werden: "
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-"Entweder mit dem neueren HPLIP, das die Druckerwartung über die einfach zu "
-"bedienende Grafikanwendung „Toolbox‟ und einen Vollbildausdruck auf neueren "
-"PhotoSmart-Modellen erlaubt "
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-"oder mit dem älteren HPOJ, das nur den Zugriff auf Scanner und "
-"Speicherkarten ermöglicht, Ihnen aber weiterhilft, wenn HPLIP nicht "
-"funktioniert. "
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr "Was ist Ihre Auswahl (wählen Sie „Keine‟ für Nicht-HP-Drucker)? "
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Ist Ihr Drucker ein Multifunktionsgerät von HP oder Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 mit Scanner, DeskJet 450, Sony "
-"IJP-V100), ein HP PhotoSmart oder ein HP LaserJet 2200?"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Installiere %s-Paket..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr "Nur Drucken wird möglich sein auf %s."
-
-#: printer/printerdrake.pm:2248
-#, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr ""
-"Konnte Ihre alte HPOJ Konfigurationsdatei %s für Ihren %s nicht löschen! "
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr "Bitte löschen Sie die Datei manuell und starten Sie HPOJ neu."
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Überprüfe Gerät und konfiguriere %s..."
-
-#: printer/printerdrake.pm:2277
-#, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Welchen Drucker wollen Sie mit HPLIP einrichten?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Installiere SANE-Pakete..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr "Das Durchsuchen auf %s wird nicht möglich sein."
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr "Ihren %s verwenden und warten"
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Installiere mtools-Pakete..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr "Photo Speicherkarten Zugriff auf %s wird nicht ermöglicht."
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Scannen auf Ihrem HP-Multifunktionsgerät"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Photo Speicherkarten Zugriff auf Ihrem HP Multifunktionsgerät"
-
-#: printer/printerdrake.pm:2509
-#, c-format
-msgid "Configuring device..."
-msgstr "Konfiguriere Gerät..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Bereite Druckerport für CUPS vor..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Lesen der Drucker-Datenbank ..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Geben Sie Druckername und Kommentare ein"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Druckernamen sollten nur Buchstaben, Ziffern und den Unterstrich unterhalten"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Der Drucker „%s“ existiert bereits. Wollen Sie ihn wirklich \n"
-"ersetzen?"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-"Der Druckername \"%s\" hat mehr als 12 Zeichen. Dies kann dazu führen, dass "
-"der Drucker von Windowsclients aus nicht erreichbar ist. Wollen Sie diesen "
-"Namen wirklich verwenden?"
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Jeder Drucker benötigt einen Namen (etwa „Drucker“).\n"
-"Beschreibung und Standort müssen nicht ausgefüllt werden.\n"
-"Sie dienen nur als Kommentare für den Anwender."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Druckername"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Beschreibung"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Standort"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Vorbereiten der Drucker-Datenbank ..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Ihr Druckermodell"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"PrinterDrake hat den Modellnamen der Selbsterkennung mit den Modellen in der "
-"Datenbank verglichen, um den besten Treiber zu finden. Die Auswahl kann "
-"jedoch falsch sein, etwa wenn Ihr Drucker nicht in der Datenbank vorhanden "
-"ist. Kontrollieren Sie, ob die Wahl korrekt ist und wählen Sie die "
-"Schaltfläche „Das Modell ist richtig“, wenn der Treiber Ihren Wünschen "
-"entspricht, andernfalls betägen Sie „Modell manuell auswählen“, um die "
-"Auswahl selbst vorzunehmen.\n"
-"\n"
-"Folgender Drucker wurde gefunden:\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Das Modell ist richtig"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Modell manuell auswählen"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"Kontrollieren Sie bitte, ob PrinterDrake Ihren Drucker korrekt erkannt hat. "
-"Falls die Markierung auf einem falschen Gerät oder auf „Rohdaten-Drucker“ "
-"steht, suchen Sie bitte selbst Ihren Drucker in der Liste."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr "Installiere eine herstellerunterstützte PPD-Datei"
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-"Jeder PostScript-Drucker wird mit einer PPD-Datei ausgeliefert, welche die "
-"Optionen des Druckers beschreiben."
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-"Diese Datei ist in der Regel irgendwo auf der CD bei den Windows- und Mac-"
-"Treibern, die mit dem Drucker geliefert wurde."
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-"Sie können die PPD-Datei auch von den Hersteller-Homepages runterladen."
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-"Falls Sie Windows auf ihrem Rechner installiert haben können Sie die PPD-"
-"Datei auch auf der Windows-Partition finden."
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-"Das Installieren der PPD-Datei Ihres Druckers und die Benutzung zur "
-"Einrichtung des Druckers machen alle Optionen des Druckers verfügbar, die "
-"durch das Gerät unterstützt werden."
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-"Hier können Sie die PPD-Datei auswählen, welche auf Ihrem Rechner "
-"installiert wird. Sie wird anschließend für die Einrichtung des Druckers "
-"verwendet."
-
-#: printer/printerdrake.pm:3020
-#, c-format
-msgid "Install PPD file from"
-msgstr "Installiere PPD-Datei von"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, c-format
-msgid "Floppy Disk"
-msgstr "Diskettenlaufwerk"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, c-format
-msgid "Other place"
-msgstr "Andere Orte"
-
-#: printer/printerdrake.pm:3039
-#, c-format
-msgid "Select PPD file"
-msgstr "PPD-Datei auswählen"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr "Die PPD Datei %s existiert nicht oder ist unlesbar!"
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr "Die PPD-Datei %s stimmt nicht mit den PPD-Spezifikationen überein!"
-
-#: printer/printerdrake.pm:3060
-#, c-format
-msgid "Installing PPD file..."
-msgstr "Installiere PPD Datei..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "OKI Win-Drucker-Konfiguration"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Sie versuchen, einen OKI Win-Laserdrucker einzurichten. Da diese Drucker ein "
-"sehr eigenwilliges Protokoll verwenden, funktionieren sie nur, wenn sie am "
-"ersten Parallelport angeschlossen sind. Sollte Ihr Drucker an einer anderen "
-"Schnittstelle oder an einer Printserver-Box hängen, schließen Sie ihn bitte "
-"an den ersten Parallelport, bevor Sie versuchen eine Testseite zu drucken ..."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Lexmark-Tintenstrahl-Konfiguration"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Der Lexmark-Tintenstrahl-Druckertreiber unterstützt nur lokale Drucker, "
-"keine Drucker an anderen Rechnern im Netzwerk oder an Printserver-Boxen. "
-"Bitte schließen Sie den Drucker direkt an Ihren Rechner oder richten Sie ihn "
-"auf dem Rechner ein, an den er angeschlossen ist."
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-"Um mit Ihrem Lexmark-Tintenstrahldrucker drucken zu können, benötigen Sie "
-"die Treiber, die von Lexmark bereitgestellt werden (http://www.lexmark."
-"com/). Klicken Sie auf den „Drivers“-Link. Wählen Sie dann das Druckermodell "
-"und geben Sie „Linux“ als Betriebssystem an. Sie erhalten die Treiber als "
-"RPM-Paket oder als Shellskript mit interaktiver grafischer Installation. Sie "
-"müssen die Einrichtung nicht mit dem Lexmark-Klicktool vornehmen. Sie können "
-"direkt nach der Lizenz auf „Abbrechen“ drücken. Drucken Sie dann die "
-"Druckkopf-Justierungsseiten mit „lexmarkmaintain“ und justieren Sie damit "
-"den Druckkopf."
-
-#: printer/printerdrake.pm:3245
-#, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Lexmark X125 Konfiguration"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Der Treiber für diesen Drucker unterstützt nur Drucker, die direkt über USB "
-"angeschlossen sind, keine Drucker an anderen Rechnern im Netzwerk oder an "
-"Printservern. Bitte schließen Sie Ihren Drucker an einen lokalen USB-"
-"Anschluss an oder richten Sie ihn auf dem Rechner ein, an den er "
-"angeschlossen ist."
-
-#: printer/printerdrake.pm:3268
-#, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Samsung ML/QL-85G Konfiguration"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Der Treiber für diesen Drucker unterstützt nur Drucker, die an der ersten "
-"Parallelschnittstelle angeschlossen sind, keine Drucker an anderen Rechnern "
-"im Netzwerk oder an Printservern. Bitte schließen Sie Ihren Drucker an die "
-"ersten Parallelschnittstelle an oder richten Sie ihn auf dem Rechner ein, an "
-"den er angeschlossen ist."
-
-#: printer/printerdrake.pm:3295
-#, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Canon LBP-460/660 Konfiguration"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr "Firmware-Upload an HP LaserJet 1000"
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Standard-Einstellungen des Druckers\n"
-"\n"
-"Sie sollten sicherstellen, dass Papiergröße, Farbangaben, Druckqualität "
-"sowie Informationen zu vorhandenem Speicher, Duplexeinheit und Papierfächern "
-"richtig eingestellt sind. Es sei auch angemerkt, dass häufig mit steigender "
-"Druckqualität die Druckgeschwindigkeit sinkt."
-
-#: printer/printerdrake.pm:3589
-#, c-format
-msgid "Printer default settings"
-msgstr "Standard-Einstellungen des Druckers"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Der Parameter %s muss eine ganzzahlige Zahl sein!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Der Parameter %s muss eine Zahl sein!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Der Parameter %s ist groß oder zu klein!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Möchten Sie diesen Drucker („%s“)\n"
-"als Standarddrucker verwenden?"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Testseiten"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Bitte wählen Sie, welche Testseiten Sie drucken wollen.\n"
-"\n"
-"Bemerkung: Der Druck der Foto-Testseite dauert häufig extrem lange. Bei "
-"Laserdruckern mit wenig Speicher kann es auch vorkommen, dass sie gar nicht "
-"gedruckt wird. Normalerweise sollte es ausreichen, die Standard-Testseiten "
-"auszudrucken."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Keine Testseiten"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Drucken"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Standard-Testseite"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternative Testseite (US-Format - „Letter“)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternative Testseite (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Foto-Testseite"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Keine Testseite(n) drucken"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Druck der Testseite(n) ..."
-
-#: printer/printerdrake.pm:3743
-#, c-format
-msgid "Skipping photo test page."
-msgstr "Überspringe Foto-Testseite."
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-"Druckstatus:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Die Testseite(n) wurden an den Drucker gesandt.\n"
-"Es kann einen Augenblick dauern, bevor der Drucker seine Arbeit aufnimmt.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "War der Ausdruck korrekt?"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Rohdaten-Drucker"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Sie können sowohl den Befehl „%s <datei>“ verwenden, wenn Sie in einer "
-"Konsole die Datei „<datei>“  drucken wollen, als auch ein grafisches "
-"Hilfsprogramm verwenden: „xpp <datei>“ oder „kprinter <datei>“. Die "
-"grafischen Hilfsprogramme erlauben Ihnen auf einfache Weise den richtigen "
-"Drucker zu wählen und die notwendigen Drucker-Parameter anzugeben.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diese Befehle auch in dem „Druck-Kommando“-Feld des Druckdialogs "
-"zahlreicher Anwendungen angeben, lassen Sie jedoch den Dateinamen weg, da "
-"die zu druckende Datei von der Anwendung geliefert wird.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Der Befehl „%s“ erlaubt es Ihnen auch zahlreiche Einstellungen für einen "
-"bestimmten Druckauftrag zu ändern. Geben Sie die gewünschten Angaben einfach "
-"in der Kommandozeile mit an, etwa: „%s <Datei>“. "
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Um alle existierenden Optionen des Druckers zu erfahren, lesen Sie entweder "
-"die unten angegebene Liste oder betätigen Sie die Schaltfläche „Liste der "
-"Drucker-Optionen“. %s%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Hier die Liste vorhandener Drucker-Parameter des aktuellen Druckers:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Verwenden Sie den Befehl „%s <Datei>“, um die Datei <Datei> in der "
-"Kommandozeile auszudrucken.\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Sie können diesen Befehl auch im „Druckkommando“-Feld vieler Programme "
-"angeben. Tragen Sie bitte keinen Dateinamen ein, da dieser vom Programm "
-"ergänzt wird.\n"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Um eine Liste der Drucker-Parameter Ihres Druckers zu erhalten, betätigen "
-"Sie bitte die Schaltfläche „Liste der Drucker-Optionen“."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Verwenden Sie einen der Befehle „%s <Datei>„ oder „%s <Datei>“, um die Datei "
-"<Datei> in der Kommandozeile auszudrucken.\n"
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"Sie können auch das Grafikwerkzeug „xpdq“ zum Setzen der Optionen und "
-"Verwalten der Druckjobs verwenden.\n"
-"Falls Sie KDE als Arbeitsoberfläche nutzen, haben Sie eine Panik-Abschaltung "
-"in Form des Arbeitsflächensymbols „Drucker anhalten!“, dass sofort alle "
-"Druckaufträge anhält, wenn Sie es betätigen. Das kann beispielsweise dann "
-"hilfreich sein, wenn Sie einen Papierstau in Ihrem Drucker haben.\n"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-"Die Befehle „%s“ und „%s“ erlauben es Ihnen ebenfalls die Optionen eines "
-"speziellen Druckjobs zu konfigurieren. Fügen Sie einfach die gewünschten "
-"Einstellungen in der Kommandozeile ein, etwa „%s <Datei>“.\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Drucken/Scannen/Fotokarten mit „%s“"
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Drucken/Scannen mit „%s“"
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Drucken/Fotokartenzugriff mit „%s“"
-
-#: printer/printerdrake.pm:3896
-#, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Benutzen/Verwalten des Druckers „%s“"
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Drucken auf Drucker „%s“"
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Liste der Drucker-Optionen"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-"Ihr %s ist mit HPs HPLIP Treiber eingerichtet. Auf diese Art und Weise "
-"werden viele spezielle Funktionen Ihres Druckers unterstützt.\n"
-"\n"
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-"Der Scanner in Ihrem Drucker kann mit den normalen SANE-Programmen verwendet "
-"werden, zum Beispiel Kooka or XSane (beide im Menü Multimedia/Grafik). "
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-"Starten Sie Scannerdrake (Hardware/Scanner im Mandriva Linux "
-"Kontrollzentrum), um Ihren Scanner im Netzwerk freizugeben.\n"
-"\n"
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-"Auf die Speicherkartenleser in Ihrem Drucker kann wie auf normale USB-"
-"Massenspeichergeräte zugegriffen werden. "
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-"Nach dem Einsetzen einer Karte sollte ein Festplattensymbol zum "
-"Kartenzugriff auf Ihrer Arbeitsfläche erscheinen.\n"
-"\n"
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-"Auf die Speicherkartenleser in Ihrem Drucker kann mit HPs Printer Toolbox "
-"(Menu: System/Überwachung/HP Printer Toolbox) durch Anklicken von „Zugriff "
-"auf Fotokarten‟ unter dem Tabulator „Funktionen‟ zugegriffen werden. "
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-"Beachten Sie bitte, dass dies sehr langsam ist. Es ist meist schneller, die "
-"Bilder von der Kamera oder einem USB-Kartenleser zu lesen.\n"
-"\n"
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-"HP's Printer Toolbox (Menu: System/Überwachung/HP Printer Toolbox) bietet "
-"eine Menge an Statusüberwachung und Verwaltungsfunktionen für Ihren %s:\n"
-"\n"
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr " - Tintenfüllstand/Statusinformation\n"
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr " - Tintendüsenreinigung\n"
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr " - Druckkopfausrichtung\n"
-
-#: printer/printerdrake.pm:3944
-#, c-format
-msgid " - Color calibration\n"
-msgstr " - Farbabgleich\n"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"Ihr Multifunktionsgerät wurde automatisch auch zum Scannen eingerichtet. Sie "
-"können nun mit dem Befehl „scanimage“ („scanimage -d hp:%s“ um den Scanner "
-"auszuwählen, falls Sie mehrere angeschlossen haben), eingegeben in der "
-"Kommandozeile, scannen. Wenn Sie eine grafisches Werkzeug verwenden wollen: "
-"„xscanimage“ bzw. „xsane“. Sie können auch den GIMP verwenden. Wählen Sie "
-"einfach im Menü „Datei/Holen“ den entsprechenden Eintrag. Sie können sich "
-"auch mittels „man scanimage„ bzw „man sane-hp“ in der Kommandozeile weitere "
-"Informationen ausgeben lassen.\n"
-"\n"
-"Sie brauchen für dieses Gerät „scannerdrake“ nicht zu starten, um es zum "
-"Scannen einzurichten. Sie müssen „scannerdrake“ nur starten, wenn Sie den "
-"Scanner im Netzwerk freigeben wollen."
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Ihr Drucker wurde automatisch so konfiguriert, dass Sie von Ihrem Rechner "
-"auf die Foto-Speicherkartenlaufwerke zugreifen können. Sie können jetzt "
-"entweder mit dem grafischen Programm MToolsFM (Menü: „Programme“ -> "
-"„Dateiwerkzeuge“ -> „MTools-Datei-Manager“) oder auf der Kommandozeile mit "
-"den mtools (Für mehr Informationen geben Sie „man mtools“ auf der "
-"Kommandozeile ein) auf die eingelegte Karte zugreifen. Sie finden das "
-"Dateisystem der Karte unter dem Laufwerksbuchstaben „p:“ oder, wenn Sie mehr "
-"als einen HP-Drucker mit Foto-Speicherkartenlaufwerken haben, unter den "
-"nachfolgenden Buchstaben. In MToolsFM können Sie zwischen den "
-"Laufwerksbuchstaben mit dem Feld über der oberen rechten Ecke der Dateiliste "
-"umschalten."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Drucker-Einstellung übertragen"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Sie können die Druckerkonfiguration, die Sie für den Spooler „%s“ "
-"vorgenommen haben für „%s“, ihren aktuellen Spooler, verwenden. Alle Daten "
-"(Name, Beschreibung, Standort, Verbindungsart und Standard- "
-"Optionseinstellungen) werden übernommen, Druckjobs in der alten "
-"Warteschlange gehen jedoch verloren.\n"
-"Nicht alle Warteschlangen können übernommen werden:\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS unterstützt keine Drucker an Novell-Servern oder Drucker, die ihre "
-"Daten in ein frei gewähltes Kommando senden.\n"
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ unterstützt nur lokale Drucker, entfernte LPD-Drucker und Socket/TCP-"
-"Drucker.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD und LPRng unterstützen keine IPP-Drucker.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Warteschlangen, die nicht mit diesem Programm oder „foomatic-configure“ "
-"erstellt wurden, können nicht übertragen werden."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Drucker, die mit den PPD-Dateien ihrer Hersteller oder CUPS-spezifischen "
-"Treibern eingerichtet wurden, können nicht übertragen werden."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Markieren Sie die Drucker, die sie übertragen wollen und betätigen Sie die "
-"Schaltfläche „Übertragen“."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Druckerdaten nicht übertragen"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Übertragen"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Es existiert bereits ein Drucker mit Namen „%s“ unter %s.\n"
-"Durch Betätigen der Schaltfäche „Übertragen“ können Sie ihn\n"
-"überschreiben. Sie können dem Drucker auch einen neuen \n"
-"Namen geben oder ihn einfach überspringen."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Neuer Druckername"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "Übertrage „%s“ ..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"Sie haben Ihren alten Standarddrucker („%s“) übertragen, soll es auch Ihr "
-"Standarddrucker unter dem neuen Drucksystem „%s“ werden?"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Aktualisieren der Druckerdaten ..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Netzwerk starten ..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Netzwerk jetzt konfigurieren"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Ihr Netzwerk ist nicht konfiguriert"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Sie wollen einen Netzwerkdrucker einrichten. Sie benötigen dafür ein "
-"funktionerendes Netzwerk, aber Ihr Netzwerk ist noch nicht eingerichtet. "
-"Wenn Sie dennoch fortfahren, ohne Ihr Netzwerk einzurichten, ist der Drucker "
-"hinterher nicht zu verwenden. Wie wollen Sie verfahren?"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Weiter ohne Netzwerkkonfiguration"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"Das von Ihnen während der Installation eingerichtete Netzwerk kann jetzt "
-"nicht gestartet werden. Testen Sie bitte, ob es nach einem Neustart zur "
-"Verfügung steht. Falls nicht, berichtigen Sie die Einstellungen im %s "
-"Kontrollzentrum unter „Netzwerk & Internet/Verbindungen“. Versuchen Sie "
-"anschließend erneut den Drucker mittels „Hardware/Drucker“ im %s "
-"Kontrollzentrum einzurichten."
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Es wurde kein aktives Netzwerk gefunden und es konnte auch keine "
-"Netzwerkverbindung hergestellt werden. Kontrollieren Sie bitte Ihre Hardware "
-"und Ihre Softwareeinstellungen. Versuchen Sie anschließend erneut den "
-"Netzwerkdrucker einzurichten."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Drucksystem neu starten ..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "Hoch"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Installiere ein Drucksystem in Sicherheitsebene %s"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Sie sind dabei das Drucksystem %s auf einem Rechner mit Sicherheitsebene %s "
-"zu installieren.\n"
-"\n"
-"Dieses Drucksystem läuft als Dämon (Hintergrundprozess), der auf "
-"Druckaufträge wartet, um sie abzuarbeiten. Da der Dämon auch für andere "
-"Rechner Ihres Netzwerks erreichbar ist,schaffen Sie damit einen möglichen "
-"Angriffspunkt. Aus Sicherheitsgründen werden in dieser Sicherheitsebene "
-"standardmäßig nur einige ausgewählte Dämons gestartet.\n"
-"\n"
-"Wollen Sie wirklich dieses Drucksystem auf diesem Rechner installieren?"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Drucksystem beim Systemstart aktivieren"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Das Drucksystem (%s) wird nicht automatisch beim Systemstart aktiviert.\n"
-"Es ist möglich, dass der Start durch den Wechsel in eine höhere "
-"Sicherheitsebene deaktiviert wurde, da das Drucksystem einen potentiellen "
-"Angriffspunkt darstellt.\n"
-"\n"
-"Wollen sie den automatischen Start des Drucksystems wiederherstellen?"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "Suche nach installierter Software..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Entferne %s ..."
-
-#: printer/printerdrake.pm:4310
-#, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Konnte das %s Drucksystem nicht entfernen!"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "Installiere %s ..."
-
-#: printer/printerdrake.pm:4334
-#, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Konnte das %s Drucksystem nicht installieren!"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-"In diesem Modus gibt es kein lokales Drucksystem, alle Druckaufträge gehen "
-"direkt zum unten angegebenen Server. Beachten Sie bitte, dass es dann nicht "
-"möglich ist,  lokale Druckerwarteschlangen einzurichten und dass wenn der "
-"angegebene Server heruntergefahren ist, von dieser Maschine überhaupt nicht "
-"gedruckt werden kann."
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-"Geben Sie den Rechnernamen oder die IP Ihres CUPS-Servers ein und klicken "
-"Sie auf OK, wenn Sie diesen Modus verwenden wollen. Ansonsten klicken Sie "
-"auf „Abbrechen“."
-
-#: printer/printerdrake.pm:4418
-#, c-format
-msgid "Name or IP of remote server:"
-msgstr "Name oder IP des entfernten Servers:"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Standarddrucker wählen ..."
-
-#: printer/printerdrake.pm:4458
-#, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Lokales CUPS-Drucksystem oder entfernter CUPS-Server?"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr "Das CUPS-Drucksystem kann auf zwei Arten verwendet werden:"
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr "1. Das CUPS-Drucksystem kann lokal arbeiten."
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-"So können lokal angeschlossene Drucker verwendet werden und entfernte "
-"Drucker an anderen CUPS-Servern im gleichen Netzwerk werden automatisch "
-"erkannt."
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-"Der nachteil dieser Heangehensweise ist, dass mehr Ressourcen auf dem "
-"lokalen Rechner gebraucht werden: Zusätzliche Software muss installiert "
-"werden, der CUPS-Dämon muss im Hintergrund laufen und braucht etwas "
-"Arbeitsspeicher und der IPP-Port (631) is offen."
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-"2. Alle Druckaufträge werden sofort zu einem entfernten CUPS-Server gesendet."
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-"Der lokale Ressourcenverbrauch ist auf ein Minimum reduziert. Kein CUPS-"
-"Dämon wird gestartet und kein Port geöffnet, keine Softwareinfrastruktur zum "
-"Aufsetzen lokaler Druckerwarteschlangen muss installiert werden, also wird "
-"weniger Arbeitsspeicher und Festplattenplatz verbraucht. "
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-"Der Nachteil ist, dass dann keine lokalen Drucker eingerichtet werden können "
-"und von dieser Maschine überhaupt nicht gedruckt werden kann, wenn der "
-"Server heruntergefahren ist."
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr "Wie soll CUPS auf Ihrer Maschine eingerichtet werden?"
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr "Entfernter Server, geben Sie hier den Namen oder die IP ein:"
-
-#: printer/printerdrake.pm:4487
-#, c-format
-msgid "Local CUPS printing system"
-msgstr "Lokales CUPS-Drucksystem"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Wählen Sie das Drucksystem"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Welches Drucksystem (Spooler) wollen Sie verwenden?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Konnte Drucker „%s“ nicht konfigurieren!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Installiere das Paket Foomatic ..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr ""
-"Konnte die %s Pakete nicht installieren, %s kann nicht gestartet werden!"
-
-#: printer/printerdrake.pm:4789
-#, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Die folgenden Drucker sind bereits eingerichtet. Führen Sie einen "
-"Doppelklick auf einen Drucker aus, um seine Einstellungen zu ändern, als "
-"Standarddrucker zu verwenden oder Informationen über ihn zu erhalten."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Alle Netzwerk-CUPS-Drucker anzeigen"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "Aktualisiere Druckerliste (um alle entfernten CUPS-Drucker anzuzeigen)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS-Konfiguration"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Drucksystem ändern"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Normaler Modus"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Expertenmodus"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Drucker-Optionen"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Drucker-Konfiguration ändern"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Drucker %s%s\n"
-"Was wollen Sie an diesem Drucker ändern?"
-
-#: printer/printerdrake.pm:5165
-#, c-format
-msgid "This printer is disabled"
-msgstr "Dieser Drucker ist deaktiviert"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Ausführen!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Art der Druckeranbindung"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Druckername, Beschreibung, Standort"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Druckerproduzent, Modell, Treiber"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Druckerproduzent, Modell"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Als Standarddrucker verwenden"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, c-format
-msgid "Enable Printer"
-msgstr "Drucker aktivieren"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, c-format
-msgid "Disable Printer"
-msgstr "Drucker deaktivieren"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Testseite(n) drucken"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Wie dieser Drucker genutzt werden kann"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Drucker entfernen"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Entferne alten Drucker „%s“..."
-
-#: printer/printerdrake.pm:5272
-#, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Drucker „%s“ ist jetzt aktiviert."
-
-#: printer/printerdrake.pm:5277
-#, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Drucker „%s“ ist jetzt deaktiviert."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Möchten Sie den Drucker „%s“ wirklich entfernen?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Entferne Drucker „%s“..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Standarddrucker"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Der Drucker „%s“ ist jetzt Ihr Standarddrucker“"
-
-#: raid.pm:42
-#, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Kann keine Partition zu dem _formatierten_ RAID %s hinzufügen"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nicht genügend Partitionen für RAID-Level %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr "Konnte Verzeichnis /usr/share/sane/firmware nicht erstellen!"
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr "Konnte Verknüpfung /usr/share/sane/%s nicht erstellen!"
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-"Ich konnte die Firmware Datei %s nicht auf /usr/share/sane/firmware kopieren!"
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr "Konnte keine Zulassung setzen für die Firmware-Datei %s!"
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "ScannerDrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-"Konnte die notwendigen Programme zum Freigeben Ihrer Scanner nicht "
-"installieren."
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr "Ihr(e) Scanner wird nur für Benutzer Root verfügbar sein"
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr "IPv4 Scheinfehlermeldungen akteptieren/ablehnen."
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr " Das ICMP-Echo akzeptieren/ablehnen."
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr "Das ICMP-Echo akzeptieren/ablehnen."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr "Das automatische Anmelden eines Benutzers erlauben/verbieten."
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-"Beim Setzen von „Alle“ sind /etc/issue und /etc/issue.net erlaubt.\n"
-"\n"
-"Beim Setzen von „Keine“ werden keine Probleme erlaubt.\n"
-"\n"
-"Andernfalls wird nur /etc/issue erlaubt."
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr ""
-"Den Neustart des Rechners durch den Konsolen Benutzer erlauben/verbieten."
-
-#: security/help.pm:29
-#, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Erlaube/Verbiete Root Login von entferntem Rechner "
-
-#: security/help.pm:31
-#, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Erlaube/Verbiete direkte Root Anmeldung"
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Erlaube/Verbiete die Liste der Benutzer dieses Rechner im Displaymanager "
-"(kdm und gdm)."
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-"Erlaube/Verbiete die Freigabe der Anzeige,\n"
-"wenn von root zu einem anderen Nutzer gewechselt wird.\n"
-"\n"
-"Siehe pam_xauth(8) für Details.'"
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"Erlaube/Verbiete X-Verbindungen: \n"
-"\n"
-"- ALLE (alle Verbindungen sind erlaubt),\n"
-"\n"
-"- LOKAL (mir Verbindungen vom lokalen Rechner),\n"
-"\n"
-"- KEINE (keine Verbindungen)."
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"Dieses Argument gibt an, ob Clients authorisiert sind, den X-Server\n"
-"vom Netzwerk auf TCP-Port 6000 zu konnektieren oder nicht."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"Authorisieren:\n"
-"\n"
-"- Alle Dienste, die durch TCP-Wrapper (siehe die hosts.deny(5) Manpage) "
-"kontrolliert werden falls „ALLE“ gesetzt wird,\n"
-"\n"
-"- nur lokale Dienste, wenn „LOKAL“ gesetzt wird,\n"
-"\n"
-"- keine Dienste, wenn „KEINE“ gesetzt wird.\n"
-"\n"
-"Um einen Dienst zu authorisieren, benutzen Sie bitte die Datei /etc/hosts."
-"allow (siehe die hosts.allow(5) Manpage). "
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"Wenn SERVER_LEVEL (oder SECURE_LEVEL wenn nicht vorhanden)\n"
-"in /etc/security/msec/security.conf größer als 3 ist, wird der Symlink\n"
-"/etc/security/msec/server zu /etc/security/msec/server.<SERVER_LEVEL>\n"
-"erstellt.\n"
-"Die Datei /etc/security/msec/server wird von „chkconfig --add“ verwendet,\n"
-"um zu entscheiden, ob ein Dienst hinzugefügt wird, wenn er in der Datei\n"
-"während der Installation des Programmes vorhanden ist."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-"Aktiviere/Deaktiviere crontab und at für Benutzer.\n"
-"\n"
-"Speichert erlaubte Benutzer in /etc/cron.allow und /etc/at.allow (siehe man "
-"at(1)\n"
-"und crontab(1))."
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr "System-Protokoll-Berichte auf Konsole 12 aktivieren/deaktivieren"
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-"Aktiviere/Deaktiviere den Schutz vor Namensauflösungs-Manipulation. Wenn\n"
-"„%s“ gewählt ist wird auch an das Systemprotokoll berichtet."
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Sicherheitswarnungen:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr "Aktiviere/Deaktiviere IP Spoofing Schutz"
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Aktiviere/Deaktiviere libsafe wenn libsafe auf dem System gefunden wird."
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr "Aktiviere/Deaktiviere das Protokollieren merkwürdiger IPv4-Pakete."
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr "Stündliche Sicherheitschecks aktivieren/deaktivieren."
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Aktiviere su nur für Mitglieder der Gruppe „wheel“ oder erlaube su für jeden "
-"Benutzer."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr "Benutzer müssen sich mit einem Passwort authentifizieren."
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr "Aktiviere/Deaktiviere die Vermischtheitsprüfung für Netzwerkkarten."
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr " Tägliche Sicherheitschecks aktivieren/deaktivieren.."
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr "Erlaube/Verbiete sulogin(8) im Single User Level"
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Fügt den Namen als eine Ausnahme an die Behandlung für die Passwort-Alterung "
-"von msec."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-"Setze Passwort-Alterung auf „maximal“ Tage um die Alterung abzuschalten."
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-"Setzt die Passwort-Historie-Dauer um der Wiederverwendung von Passwörtern "
-"vorzubeugen."
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Setzt die minimale Passwort-Länge sowie minimale Anzahl von Ziffern und "
-"Großbuchstaben."
-
-#: security/help.pm:108
-#, c-format
-msgid "Set the root umask."
-msgstr "Setzen der Root Umask"
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "Auf „Ja“ gestellt, werden offene Ports kontrolliert."
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"Falls „Ja“, kontrolliere:\n"
-"\n"
-"- leere Passwörter,\n"
-"\n"
-"- fehlende Passwörter in „/etc/shadow“,\n"
-"\n"
-"- Kennzeichen außer „root“ mit ID 0."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"Prüfe die Berechtigungen der Dateien in den Heimatverzeichnissen der "
-"Benutzer, wenn „Ja“ gesetzt ist."
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"Wenn auf „Ja“ gezetzt, überprüfe ob die Netzwerk Geräte im gemischten Modus "
-"sind"
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "Wenn auf „Ja“ gesetzt, werden täglich Sicherheitschecks durchgeführt."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "Prüfe Änderungen an den sgid-Dateien, wenn „Ja“ gesetzt ist."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "Wenn auf „Ja“ gesetzt, prüfe auf leere Passwörter in /etc/shadow."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-"Wenn auf „Ja“ gesetzt, kontrolliere die Prüfsumme der suid/sgid Dateien"
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-"Wenn auf „Ja“ gesetzt, Suche von Veränderungen bei „suid root“ Dateien."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "Wenn auf „Ja“ gesetzt, werden Dateien ohne Eigentümer gemeldet."
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-"Wenn auf Ja gesetzt, überprüfe Dateien/Verzeichnisse die für alle schreibbar "
-"sind."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "Wenn auf „Ja“ gesetzt, starte chkrootkit Überprüfung"
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"Wenn ausgefüllt, wird E-Mail an diese Adresse geschickt, sonst an „root“."
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "Falls markiert, Ergebnis per E-Mail zustellen."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr "Sende keine Emails, wenn vor nichts zu warnen ist."
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "Prüfe die RPM-Datenbank, wenn „Ja“ gesetzt ist."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "Wenn auf „Ja“ gesetzt, werden Prüfergebnisse an syslog schicken"
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "Wenn auf „Ja“ gesetzt, werden Prüfergebnisse nach tty gesendet."
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Setzt die Größe des Kommandozeilenarchivs. Der Wert „-1“ steht für "
-"unbegrenzt."
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "Setzen des Shell-Timeouts. Der Wert Null bedeutet kein Timeout."
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr "Auszeit-Dauer in Sekunden"
-
-#: security/help.pm:138
-#, c-format
-msgid "Set the user umask."
-msgstr "Setzen der Benutzerzugriffsmaske."
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr "Akzeptiere gefälschte IPv4 Fehlermeldungen"
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr "Broadcast-ICMP-Echo akzeptieren"
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr "Akzeptiere ICMP Echo"
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr "/etc/issue* existiert"
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr "Neustart durch den Konsolen Benutzer"
-
-#: security/l10n.pm:17
-#, c-format
-msgid "Allow remote root login"
-msgstr "Remote-Root-Login erlauben"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr "Direkte Root Anmeldung"
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr "Benutzer in den Display-Managern auflisten (kdm und gdm)"
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr "Anzeige exportieren wenn von root zu anderen Benutzern gewechselt wird"
-
-#: security/l10n.pm:21
-#, c-format
-msgid "Allow X Window connections"
-msgstr "X Window Verbindungen erlauben"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr "Erlaube TCP Verbindungen zum X Windows System"
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr "Autorisiere all Dienste, die von TCP-Wrappern kontolliert werden"
-
-#: security/l10n.pm:24
-#, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Chkconfig folgt msec-Regeln"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr "Aktiviere  „crontab“ und „at“ für Benutzer"
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr "Syslog berichtet auf Konsole 12"
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr "Aktivier Schutz gegen Namenauflösung"
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr "Aktiviere Schutz gegen IP Spoofing"
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr "Libsafe aktivieren, falls auf dem System gefunden"
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr "Aktiviere das Protokollieren von seltsamen IPv4 Packeten"
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr "Aktiviere msec stündlichen Sicherheits Check"
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr "Erlaube su nur für Mitglieder der Wheel Gruppe oder für alle Benutzer"
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr "Benutzer müssen sich mit Passwort authentifizieren."
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr "Ethernet-Karten Offenheits Überprüfung"
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr "Täglicher Sicherheitscheck"
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr "Sulogin(8) im Einzelplatznutzer Ebene"
-
-#: security/l10n.pm:37
-#, c-format
-msgid "No password aging for"
-msgstr "Kein Passwort Ablaufdatum für"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr "Setze Passwort Ablauf und Nutzerkonto Abschalt Verzögerung"
-
-#: security/l10n.pm:39
-#, c-format
-msgid "Password history length"
-msgstr "Passwort Verlaufslänge"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr "Minimale Passwortlänge und die Anzahl der Ziffern und Buchstaben"
-
-#: security/l10n.pm:41
-#, c-format
-msgid "Root umask"
-msgstr "Root umask"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr "Anzal gespeicherter Kommandozeilenaufrufe"
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr "Zeitüberschreitung der Shell"
-
-#: security/l10n.pm:44
-#, c-format
-msgid "User umask"
-msgstr "User umask"
-
-#: security/l10n.pm:45
-#, c-format
-msgid "Check open ports"
-msgstr "Prüfe offene Ports"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr "Prüfe auf ungesicherte Benutzerkonten"
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr ""
-"Überprüfe Dateiberechtigungen in den persönlichen Verzeichnissen (/home)"
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr "Überprüfe, ob sich die Netwerkgeräte in einem offenen Modus befinden"
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr "Tägliche Sicherheitschecks durchführen"
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "Überprüfe das Hinzufügen/Entfernen von „sgid“ Dateien"
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "Prüfe auf leere Passwörter in /etc/shadow"
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "Verifiziere die Prüfsumme der „suid/sgid“ Dateien"
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "Überprüfe das Hinzufügen/Entfernen von „suid“ Dateien"
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr "Dateien ohne Eigentümer melden"
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "Überprüfe Dateien/Verzeichnisse die schreibbar für alle sind"
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr "Starte chkrootkit Überprüfung"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr "Keine unnötigen Emails senden"
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"Wenn ausgefüllt, wird E-Mail an diese Adresse geschickt, sonst an „root“."
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr "Ergebnis per E-Mail bekanntgeben"
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr "Überprüfe die rpm Datenbank"
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr "Ergebnis in SysLog speichern"
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr "Sendet Prüfbericht an tty"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Cracker-Spielplatz"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Schwach"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Hoch"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Höher"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Diese Ebene ist mit Vorsicht zu verwenden. Zwar macht sie Ihr System \n"
-"einfacher handhabbar, aber auch leichter angreifbar: In dieser Form darf \n"
-"der Rechner nicht als Netzwerkrechner (LAN oder Modem) verwendet werden, \n"
-"da Angreifer mangels Passwort an Ihre Daten gelangen können!"
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Passwortabfragen sind nun eingeschaltet, aber die Verwendung als \n"
-"Netzwerkrechner kann hier nicht empfohlen werden."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Das ist die Standard-Sicherheitsebene für Rechner, mit Internetzugang \n"
-"als Client."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Es gibt bereits mehr Restriktionen und jede Nacht werden automatische "
-"Sicherheitstests durchgeführt."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Mit dieser Sicherheitsebene wird es möglich, das System als einen \n"
-"Server zu verwenden.\n"
-"Die Sicherheit ist nun ausreichend hoch, um das System als Server \n"
-"einzusetzen, der einer Vielzahl von Clients einen Verbindungsaufbau \n"
-"erlaubt. Es sei hier angemerkt, dass Ihr Rechner, wenn Sie nur als \n"
-"Client ins Internet gehen, besser eine niedrigere Sicherheitsebene \n"
-"verwenden sollte."
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Diese Ebene bietet die selbe Funktionalität, wie die vorherige. Jedoch ist \n"
-"das System nun komplett geschlossen. Es ist die höchste Sicherheitsebene."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "DrakSec-Grundeinstellungen"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Wählen Sie die gewünschte Sicherheitsebene"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Sicherheitsebene"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "„libsafe“ bei Servern verwenden"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Eine Bibliothek, die gegen sog. „buffer overflow“-Angriffe schützt."
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Sicherheitsadministrator (Benutzername oder E-Mail)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Startet das ALSA (Advanced Linux Sound Architecture) Sound-System"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr ""
-"Mit dem Dienst anacron können cron-Prozesse auch zu anderen als den \n"
-"vorgegebenen Zeiten gestartet werden. Dies ist vor Allem dann \n"
-"sinnvoll, wenn Ihr Rechner nicht rund um die Uhr läuft, da sonst \n"
-"Prozesse, die etwa zwischen Mitternacht und 6:00 Uhr gestartet \n"
-"werden sollten, nie ausgeführt würden."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Der APM-Dienst (apmd) wird von Laptops verwendet, um den Ladestatus \n"
-"der Batterie durch den Syslog-Dienst erfassen zu lassen. Mit seiner \n"
-"Hilfe kann man den Computer auch rechtzeitig herunterfahren lassen, \n"
-"bevor die Batterien leer sind."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Dieser Dienst startet Applikationen der at-Warteschlange wenn der \n"
-"dafür vorgesehene Zeitpunkt erreicht ist. Lässt die Systemauslastung \n"
-"es zu, werden sog. Batch-Anwendungen gestartet."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Der Befehl cron wird unter UNIX/Linux dazu verwendet, Benutzerprogramme \n"
-"zu vordefinierten regelmäßigen Zeiten abzuarbeiten. \n"
-"Der Dienst vixie cron erweitert dieses Konzept um weitere Funktionen, etwa \n"
-"ein verbessertes Sicherheitskonzept und einfachere Konfiguration."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-"FAM ist ein Datei-Monitor-Dienst. Er wird benutzt um anzuzeigen, \n"
-"wenn sich Dateien ändern.\n"
-"FAM wird von GNOME und KDE genutzt."
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Der GPM-Dienst stellt Ihnen eine Mausunterstützung in textbasierten Linux-\n"
-"Programmen, wie dem Midnight Commander, zur Verfügung. Es erlaubt\n"
-"auch mausbasierte Ausschneiden-und-Einfügen-Operationen auf der\n"
-"Konsole und unterstützt Pop-Up-Menüs auf der Konsole."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake führt Hardwaretests durch, und konfiguriert (falls nötig) \n"
-"neue/geänderte Hardware."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache ist ein World-Wide-Web-Server. Mit seiner Hilfe können Sie \n"
-"HTML-Dateien über HTTP publizieren. Der Server ist CGI-fähig."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Der Internet Superserver-Dienst (inetd) startet je nach Bedarf \n"
-"etliche andere Internet-Dienste, so etwa telnet, ftp, rsh oder \n"
-"rlogin. Dies jedoch nur, wenn die entsprechenden Dienste in der \n"
-"Datei „/etc/inetd.conf“ freigeschaltet sind. \n"
-"Schalten Sie diesen Dienst ab, können Sie auf keine der von inetd \n"
-"verwalteten Dienste mehr zugreifen."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Startet Paketfilterung für Linux 2.2-Kernel, um Ihren Rechner \n"
-"durch eine Firewall vor Angriffen aus dem Netz zu schützen."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Dieser Dienst lädt die Tastaturbelegung, die in der Datei \n"
-"„/etc/sysconfig/keyboard“ angegeben ist. Mittels „kbdconfig“ \n"
-"können Sie diese Einstellung ändern. Schalten Sie diesen Dienst ab, \n"
-"müssen Sie ab dem nächsten Systemstart mit der amerikanischen \n"
-"Tastatur vorlieb nehmen."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Automatische Neuerstellung der Kernel-Header in /boot für\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Automatische Erkennung und Konfiguration neuer Hardware während des \n"
-"Systemstarts."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf versucht beim Systemstart einige Verwaltungsaufgaben \n"
-"auszuführen."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Der Dienst lpd ist der Drucker-Server Ihres Rechners. Wenn Sie \n"
-"diesen Dienst abschalten werden Druckaufträge nicht mehr abgearbeitet.\n"
-"Hauptaufgabe von lpd ist es, Druckaufträge an den jeweiligen \n"
-"zuständigen Drucker (dieser kann auch einen anderen Rechner hängen) \n"
-"zu senden."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Der Linux Virtual Server kann verwendet werden, um ein \n"
-"hochperformanten Hochverfügbarkeitsserver aufzusetzen."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Der Dienst named (BIND) stellt ihnen einen Server zur Verfügung, \n"
-"mit dessen Hilfe Rechnernamen in IP-Adressen umgesetzt werden. \n"
-"Ein solcher Dienst wird „Domain Name Server“ (DNS) genannt. \n"
-"Falls Sie nur einen Rechner besitzen, mit dem Sie per Modem/ISDN ins \n"
-"Netz gehen, benötigen Sie diesen Dienst nicht."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Dieser Dienst ist verantwortlich dafür, dass alle Netzwerk-Dateisysteme \n"
-"(NFS) beim Systemstart eingehängt werden, etwa SMB (Lan Manager/Windows) \n"
-"und NCP (NetWare)."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Dieser Dienst aktiviert Netzwerkgeräte (etwa Netzwerkkarten), die \n"
-"so konfiguriert wurden, dass sie ab dem Systemstart zur Verfügung \n"
-"stehen sollen."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können\n"
-" (File sharing). \n"
-"Dieser Dienst stellt Ihnen einen solchen Server zur Verfügung. \n"
-"Konfiguriert wird er in der Datei „/etc/exports“."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ist ein geläufiges Protokoll in TCP/IP-Netzwerken um Dateien \n"
-"durch verschiedene Rechner gemeinsam nutzen zu können. \n"
-"Der Dienst nfslock stellt Ihnen hierfür Sperr-Mechanismen zur \n"
-"Verfügung, damit eine Datei nicht durch mehrere Personen \n"
-"gleichzeitig verändert werden kann."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Schaltet beim Betriebssystemstart automatisch die „Num“-Taste für \n"
-"die virtuellen Konsolen und Xorg ein."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Unterstützung für den OKI 4w und kompatible WinDrucker."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"PCMCIA wird normalerweise in Laptops verwendet, um Ethernet-Karten \n"
-"oder Modems verwenden zu können. Dieser Dienst wird nur gestartet, \n"
-"wenn Sie ihn vorher konfiguriert haben. Daher schadet es nicht, \n"
-"wenn Sie ihn auf Rechnern aktivieren, auf denen er nutzlos ist."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Mittels portmapper werden RPC-Verbindungen verwaltet, die etwa von \n"
-"den Protokollen NFS und NIS verwendet werden. Auf Rechnern, die \n"
-"solche Server (RPC-basierte) beherbergen, muss dieser Dienst \n"
-"aktiviert sein."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix ist ein E-Mail-Transport-Dienst. Mit seiner Hilfe werden \n"
-"E-Mails zwischen verschiedenen Rechnern ausgetauscht."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Dieser Dienst speichert beim Herunterfahren des Rechners den Zustand \n"
-"des Zufallszahlengenerators, um ihn beim nächsten Systemstart \n"
-"wieder zu restaurieren. Die Qualität erzeugter Zufallszahlen \n"
-"wird dadurch verbessert."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Weist Roh-Geräten ein blockorientiertes Gerät (etwa eine\n"
-"Festplattenpartition) zu. Dies wird für Anwendungen wie\n"
-"etwa ORACLE-Datenbankem oder DVD-Playern benötigt"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Der Dienst routed ermöglicht ein automatisches Aktualisieren der \n"
-"IP-Routing-Tabellen mittels RIP-Protokoll. Zwar wird RIP in kleinen \n"
-"Netzwerken verwendet, jedoch wird für komplexere Netzwerke ein \n"
-"anderer Dienst benötigt."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Der Dienst rstat ermöglicht es Anwendern anderer Rechner des \n"
-"Netzwerks Preformance-Daten dieses Rechners zu erhalten."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Der Dienst rusers ermöglicht es Anwendern anderer Rechner \n"
-"herauszubekommen, welche Benutzer auf diesem Rechner \n"
-"gerade angemeldet sind."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"Der Dienst rwho erlaubt es Benutzern entfernter Rechner eine Liste\n"
-"momentan angemeldeter Benutzer übermittelt zu bekommen \n"
-"(ähnlich wie finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Starten des Sound-Systems Ihres Rechners"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Mittels Syslog versuchen zahlreiche Dienste Verlaufsprotokolle \n"
-"in vorgesehene Dateien zu sichern. Es ist sinnvoll Syslog immer \n"
-"aktiviert zu haben."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Lädt die Treiber für Ihre USB-Geräte."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr ""
-"Dieser Dienst startet den X-Font-Server. Er ist notwendig, \n"
-"damit Xorg gestartet werden kann!"
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr ""
-"Wählen Sie, welche Dienste\n"
-"automatisch beim Systemstart\n"
-"aktiviert werden sollen"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Drucken"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Internet"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Gemeinsamer Dateizugriff"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Fernwartung"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Datenbankserver"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "aktiv"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "gestoppt"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Dienste und Dämonen"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Es existieren leider keine\n"
-"weiteren Informationen zu\n"
-"diesem Dienst."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Info"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr "Starten wenn verlangt"
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "Beim Systemstart"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Start"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Stopp"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr "<b>Was ist Mandriva Linux?</b>"
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Willkommen zu <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-"Mandriva Linux ist eine <b>Linuxdistribution</b>, die sowohl den Kern des "
-"Systems umfasst, der <b>Betriebssystem</b> (basierend auf dem Linux-Kernel) "
-"genannt wird, als auch <b>eine Menge Anwendungen</b>, die jeden Bedarf "
-"abdecken, den Sie sich vorstellen können."
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-"Mandriva Linux ist die <b>benutzerfreundlichste</b> Linuxdistribution "
-"heutzutage. Sie ist außerdem eine der <b>am weitesten verbreiteten</b> "
-"Linuxdistributionen weltweit!"
-
-#: share/advertising/02.pl:13
-#, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Open Source</b>"
-
-#: share/advertising/02.pl:15
-#, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Willkommen in der <b>Open Source Welt</b>!"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-"Mandriva Linux verpflichtet sich dem Open-Source-Modell. Das bedeutet, dass "
-"diese neue Ausgabe das Resultat der <b>Zusammenarbeit</b> zwischen "
-"<b>Mandrivas Entwicklern</b> und der <b>weltweiten Gemeinschaft</b> von "
-"Mitwirkenden ist."
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-"Wir möchten jedem <b>danken</b>, der an der Entwicklung dieser neuesten "
-"Version teilgenommen hat."
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr "<b>Die GPL</b>"
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-"Ein Großteil der in der Distribution enthaltenen Programme und alle Mandriva "
-"Linux-Werkzeuge sind unter der <b>General Public License</b> lizensiert."
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-"Die GPL ist das Herzstück des Open-Source-Modells; es gestattet jedem die "
-"<b>Freiheit</b>, die Programme zu verwenden, zu untersuchen, zu verteilen "
-"und auf jede beliebige Art und Weise zu verbessern, solange die Ergebnisse "
-"verfügbar gemacht werden."
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-"Der Hauptvorteil dabei ist, dass die Anzahl der Entwickler nahezu "
-"<b>unbegrenzt</b> ist, was zu <b>sehr hochqualitativen</b> Programmen führt."
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr "<b>Treten Sie der Gemeinschaft bei</b>"
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-"Mandriva Linux hat eine der <b>größten Gemeinschaften</b> von Nutzern und "
-"Entwicklern. Die Rolle dieser Gemeinschaft ist sehr umfassend und erstreckt "
-"sich von Fehlerberichten bis zur Entwicklung neuer Anwendungen. Die "
-"Gemeinschaft spielt eine <b>Schlüsselrolle</b> in der Mandriva Linux-Welt."
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-"Um mehr über unsere dynamische Gemeinschaft zu <b>erfahren</b>, besuchen Sie "
-"bitte <b>www.mandrivalinux.com</b> oder direkt <b>www.mandrivalinux.com/en/"
-"cookerdevel.php3</b>, wenn Sie sich in die Entwicklung <b>einbringen</b> "
-"wollen."
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr "<b>Download-Version</b>"
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-"Sie installieren <b>Mandriva Linux Download</b>. Das ist die freie Version, "
-"die Mandriva <b>für jeden zur Verfügung</b> stellt."
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-"Die Download-Version <b>kann nicht</b> die ganze Software enthalten, die "
-"nicht Open Source ist. Deswegen werden Sie in der Download-Version die "
-"folgenden Dinge nicht finden:"
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-"\t* <b>Proprietäre Treiber</b> (wie zum Beispiel Treiber für NVIDIA®, ATI™, "
-"etc.)."
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-"\t* <b>Proprietäre Software</b> (wie zum Beispiel Acrobat® Reader®, "
-"RealPlayer®, Flash™, usw.)."
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-"Sie werden auch keinen Zugriff auf die in den anderen Mandriva-Produkten "
-"<b>inbegriffenen Dienstleistungen</b> haben."
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr "<b>Discovery, Ihr erster Linux-Desktop</b>"
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr "Sie installieren <b>Mandriva Linux Discovery</b>."
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-"Discovery ist die <b>einfachste</b> und <b>benutzerfreundlichste</b> Linux-"
-"Distribution. Sie enthält eine handverlesene Auswahl <b>erstklassiger "
-"Software</b> für Büro-, Multimedia- und Internet-Anwendungen. Ihr Menü ist "
-"aufgabenorientiert, mit einer einzigen Anwendung pro Aufgabe."
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr "<b>PowerPack, der ultimative Linux-Desktop</b>"
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr "Sie installieren <b>Mandriva Linux PowerPack</b>."
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-"PowerPack ist Mandrivas <b>erstklassiger Linux-Desktop</b>. PowerPack "
-"beinhaltet <b>tausende Anwendungen</b> -- alles vom Beliebtesten bis zum "
-"Fortschrittlichsten."
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr "<b>PowerPack+, die Linuxlösung für Desktops und Server</b>"
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr "Sie installieren <b>Mandriva Linux PowerPack+</b>."
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-"PowerPack+ ist eine <b>ausgewachsene Linux-Lösung</b> für kleine bis "
-"mittelgroße Netzwerke. PowerPack+ beinhaltet tausende <b>Desktop-"
-"Anwendungen</b> und eine reichhaltige Auswahl an <b>Serveranwendungen</b> "
-"der Spitzenklasse."
-
-#: share/advertising/09.pl:13
-#, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "<b>Mandriva Produkte</b>"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-"<b>Mandriva</b> hat eine breite Auswahl an <b>Mandriva Linux</b>-Produkten "
-"entwickelt."
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr "Die Mandriva Linux Produkte sind:"
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr "\t* <b>Discovery</b>, Ihr erster Linux-Desktop."
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr "\t* <b>PowerPack</b>, der ultimative Linux-Desktop."
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr "\t* <b>PowerPack+</b>, die Linuxlösung für Desktops und Server."
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-"\t* <b>Mandriva Linux für x86-64</b>, die Mandriva Linux-Lösung, um das "
-"Beste aus Ihrem 64-Bit-Prozessor zu machen."
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr "<b>Mandriva Produkte (Nomaden-Produkte)</b>"
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-"Mandriva hat zwei Produkte entwickelt, die es Ihnen erlauben, Mandriva Linux "
-"<b>auf jedem Rechner</b> ohne vorherige Installation zu verwenden:"
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-"\t* <b>Move</b>, eine Mandriva Linux-Distribution, die komplett von einer "
-"startbaren CD-ROM läuft."
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-"\t* <b>GlobeTrotter</b>, eine Mandriva Linux-Distribution vorinstalliert auf "
-"der ultra-kompakten „LaCie Mobilen Festplatte“."
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr "<b>Mandriva Produkte (Professionelle Lösungen)</b>"
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-"Unten aufgeführt sind die Mandriva-Produkte für die <b>professionellen "
-"Bedürfnisse</b>:"
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-"\t* <b>Corporate Desktop</b>, der Mandriva Linux-Desktop für Geschäfte."
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr "\t* <b>Corporate Server</b>, die Mandriva Linux-Serverlösung."
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-"\t* <b>Multi-Network-Firewall</b>, die Mandriva Linux-Sicherheitslösung."
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr "<b>die KDE Wahl</b>"
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-"Mit Discovery wird Ihnen <b>KDE</b> vorgestellt, die fortschrittlichste und "
-"benutzerfreundlichste <b>grafische Desktop-Umgebung</b>."
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-"KDE wird Ihre <b>ersten Schritte</b> mit Linux so <b>einfach</b> machen, "
-"dass Sie gar kein anderes Betriebssystem mehr laufen lassen wollen!"
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-"KDE beinhaltet auch eine Menge <b>gut integrierter Anwendungen</b> wie "
-"beispielsweise Konqueror, den Webbrowser, und Kontact, die persönliche "
-"Informationsverwaltung."
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Wählen Sie Ihre Desktop-Umgebung</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"Mit PowerPack werden Sie die Auswahl der <b>grafischen Desktop-Umgebung</b> "
-"haben.  Mandriva hat <b>KDE</b> als Voreinstellung gewählt."
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-"KDE ist eine der <b>fortschrittlichsten</b> und <b>benutzerfreundlichsten</"
-"b> grafischen Desktop-Umgebungen. Es enthält eine Menge integrierter "
-"Anwendungen."
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-"Wir raten Ihnen jedoch, auch die anderen auszuprobieren (einschließlich "
-"<b>GNOME</b>, <b>IceWM</b>, usw.) und Ihre Favoriten auszuwählen."
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-"Mit PowerPack+ werden Sie die Auswahl der <b>grafischen Desktop-Umgebung</b> "
-"haben.  Mandriva hat <b>KDE</b> als Voreinstellung gewählt."
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "<b>OpenOffice.org</b>"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr "Mit Discovery werden Sie <b>OpenOffice.org</b> entdecken."
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-"Es ist eine <b>ausgewachsene Sammlung von Büroanwendungen</b>, die "
-"Textverarbeitung, Tabellenkalkulation, Präsentations- und Malanwendungen "
-"beinhaltet."
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-"OpenOffice.org kann die meisten Arten von <b>Microsoft® Office</b> "
-"Dokumenten, wie beispielsweise Word- Excel- und PowerPoint®-Dateien, lesen "
-"und schreiben."
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-"Discovery beinhaltet <b>Kontact</b>, die neue KDE <b>Groupware-Lösung</b>."
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-"Mehr als nur ein ausgewachsenes <b>E-Mail-Programm</b>, beinhaltet Kontact "
-"auch ein <b>Adressbuch</b>, einen <b>Kalender</b> und ein Werkzeug zum "
-"<b>Notizen</b> aufzeichnen!"
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-"Das ist der einfachste Weg, um mit Ihren Partnern zu kommunizieren und Ihre "
-"Zeit zu organisieren."
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Im Internet surfen</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-"Discovery wird Ihnen Zugriff auf <b>alle Internet-Ressourcen</b> geben:"
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr "\t* Browsen Sie im <b>Netz</b> mit Konqueror."
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr "\t* <b>Chatten</b> Sie online mit Ihren Freunden mit Kopete."
-
-#: share/advertising/16.pl:18
-#, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "\t* <b>Übertragen</b> Sie Dateien mit KBear."
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr "\t* ..."
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr "<b>Genießen Sie unsere Multimedia-Fähigkeiten</b>"
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr "Discovery wird auch <b>Multimedia</b> für Sie sehr leicht machen:"
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr "\t* Schauen Sie Ihre Lieblings<b>videos</b> mit Kaffeine."
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr "\t* Hören Sie Ihre <b>Musikdateien</b> mit amaroK."
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr "\t* Bearbeiten und erstellen Sie <b>Bilder</b> mit GIMP."
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr "<b>Genießen Sie die breite Auswahl an Anwendungen</b>"
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-"Im Mandriva Linux-Menü finden Sie <b>einfach zu bedienende</b> Anwendungen "
-"für <b>alle Ihre Aufgaben</b>:"
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-"\t* Erzeugen, bearbeiten und teilen Sie Büro-Dokumente mit <b>OpenOffice."
-"org</b>"
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-"\t* Verwalten Sie Ihre persönlichen Daten mit den integrierten persönlichen "
-"Informationsverwaltungen <b>Kontact</b> und <b>Evolution</b>."
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-"\t* Durchstöbern Sie das Internet mit <b>Mozilla</b> und <b>Konqueror</b>"
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr "\t* Nehmen Sie an Chats teil mit <b>Kopete</b> und <b>Xchat</b>"
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-"\t* Hören Sie Ihre <b>Audio-CDs</b> und <b>Musikdateien</b> und schauen Sie "
-"Ihre <b>Videos</b> an."
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr "\t* Bearbeiten Sie Bilder und Fotos mit <b>The Gimp!</b>"
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Entwicklungsumgebungen</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-"PowerPack gibt Ihnen die besten Werkzeuge zum <b>Entwickeln</b> Ihrer "
-"eigenen Anwendungen."
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-"Sie werden sich an der leistungsfähige, integrierte Entwicklungsumgebung von "
-"KDE, <b>KDevelop</b>, erfreuen, die Sie in einer Vielzahl von Sprachen "
-"programmieren lässt."
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-"PowerPack bringt auch <b>GCC</b> mit, den führenden Linux-Compiler und "
-"<b>GDB</b>, den dazugehörigen Debugger."
-
-#: share/advertising/20.pl:13
-#, c-format
-msgid "<b>Development Editors</b>"
-msgstr "<b>Entwicklungseditoren</b>"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-"PowerPack lässt Sie zwischen folgenden <b>beliebten Editoren</b> wählen:"
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr "\t* <b>Emacs</b>: ein anpassbarer Echtzeit-Editor"
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-"\t* <b>XEmacs</b>: Ein weiterer OpenSource-Texteditor und "
-"Anwendungsentwicklungssystem"
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-"\t* <b>Vim</b>: Ein verbesserter Texteditor mit erweiterten Funktionen "
-"gegenüber dem normalen Vi"
-
-#: share/advertising/21.pl:15
-#, c-format
-msgid "<b>Development Languages</b>"
-msgstr "<b>Programmiersprachen</b>"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-"Mit all diesen <b>leistungsfähigen Werkzeugen</b> werden Sie in der Lage "
-"sein, Anwendungen in <b>Dutzenden von Programmiersprachen</b> zu schreiben:"
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr "\t* Die berühmte Programmiersprache <b>C</b>."
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr "\t* Objektorientierte Sprachen:"
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, c-format
-msgid "\t* Scripting languages:"
-msgstr "\t* Skriptsprachen:"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr "\t* Und vieles mehr."
-
-#: share/advertising/22.pl:15
-#, c-format
-msgid "<b>Development Tools</b>"
-msgstr "<b>Entwicklungswerkzeuge</b>"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-"Mit der leistungsfähigen integrierten Entwicklungsumgebung <b>KDevelop</b> "
-"und dem führenden Linux-Compiler  <b>GCC</b> werden Sie in der Lage sein, "
-"Anwendungen in <b>vielen verschiedenen Sprachen</b> (C, C++, Java™, Perl, "
-"Python, usw.) zu schreiben."
-
-#: share/advertising/23.pl:13
-#, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Groupware Server</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-"PowerPack+ gibt Ihnen Zugriff auf <b>Kolab</b>, einem ausgewachsenen "
-"<b>Groupware-Server</b>, der mit Hilfe seines Clients <b>Kontact</b> Ihnen "
-"erlaubt:"
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "\t* <b>E-Mails</b> zu versenden und zu empfangen."
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr "\t* Ihre <b>Agendas</b> und Ihr <b>Adressbuch</b> zu teilen."
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr "\t* Ihre <b>Notizen</b> und <b>Aufgabenlisten</b> zu verwalten."
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Server</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-"Steigern Sie die Leistungsfähigkeit Ihrers Business-Netzwerks mit "
-"<b>erstklassigen Serverlösungen</b> mit:"
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-"\t* <b>Samba</b>: Datei- und Druckdienste für Microsoft Windows Clients"
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "\t* <b>Apache</b>: Der meistgenutzte Web-Server weltweit"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-"\t* <b>MySQL</b> und <b>PostgreSQL</b>: die beliebtesten Open Source "
-"Datenbanken der Welt."
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-"\t* <b>CVS</b>: Concurrent Versions System, die dominierende OpenSource-"
-"Lösung für transparente Versionskontrolle in einem Netzwerk"
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-"\t* <b>ProFTP</b>: der stark konfigurierbare GPL-lizenzierte FTP-Server"
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-"\t* <b>Postfix</b> und <b>Sendmail</b>: die beliebten und leistungsfähigen "
-"Mailserver."
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Mandriva Linux Kontrollzentrum</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-"Das <b>Mandriva Linux-Kontrollzentrum</b> ist eine wesentliche Sammlung der "
-"Mandriva Linux-spezifischen Werkzeuge um die Einrichtung des Computers zu "
-"vereinfachen."
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-"Sie werden sehr schnell diese Sammlung von <b>mehr als 60</b> nützlichen "
-"Programmen zum <b>einfachen Einrichten Ihres Systems</b> schätzen lernen:"
-"Hardware-Geräte, Einhängepunkte, Netzwerk- und Internet, Sicherheitsebene "
-"Ihres Rechners usw."
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr "<b>Das Open-Source-Modell</b>"
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-"Wie jede andere Software, benötigt auch Open Source Software <b>Zeit und "
-"Leute</b> für ihre Entwicklung. Um die Open Source Philosophie anzuerkennen, "
-"verkauft Mandriva Mehrwertprodukte und Dienstleistungen, um <b>Mandriva "
-"Linux zu verbessern</b>. Wenn Sie die Open Source Philosophy und die "
-"Entwicklung von Mandriva Linux <b>unterstützen</b> wollen, ziehen Sie "
-"<b>bitte</b> den Kauf eines unserer Produkte oder Dienstleistungen in "
-"Betracht!"
-
-#: share/advertising/27.pl:13
-#, c-format
-msgid "<b>Online Store</b>"
-msgstr "<b>Online Warenhaus</b>"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-"Um mehr über Mandriva-Produkte und -dienstleistungen zu erfahren, können Sie "
-"unsere <b>e-commerce Plattform</b> besuchen."
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-"Dort finden Sie all unsere Produkte, Dienstleistungen und Fremdprodukte."
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-"Diese Plattform wurde gerade <b>neugestaltet</b>, um seine Wirksamkeit und "
-"Benutzbarkeit zu verbessern."
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr "Schauen Sie noch heute unter <b>store.mandriva.com</b> rein!"
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-"<b>Mandriva Club</b> ist der <b>perfekte Begleiter</b> für Ihr Mandriva "
-"Linux-Produkt."
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-"Profitieren Sie durch einen Beitritt in den Mandriva Club von <b>wertvollen "
-"Vorteilen</b>, wie beispielsweise:"
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-"\t* <b>Spezialrabatte</b> auf Produkte und Dienstleistungen unseres Online-"
-"Warenhauses <b>store.mandriva.com</b>."
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-"\t* Zugriff auf <b>kommerzielle Anwendungen</b> (zum Beispiel auf NVIDIA® "
-"oder ATI™ Treiber)."
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr "\t* Teilnahme an Mandriva Linux <b>Nutzerforen</b>."
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-"\t* <b>Früher und privilegierter Zugriff</b>, vor der öffentlichen Ausgabe, "
-"auf Mandriva Linux <b>ISO-Abbilder</b>."
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-"<b>Mandriva Online</b> ist eine neue Premiumdienstleistung, die Mandriva "
-"stolz seinen Kunden anbietet!"
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-"Mandriva Online bietet eine breite Palette wertvoller Dienstleistungen zur "
-"<b>einfachen Aktualisierung</b> Ihres Mandriva Linux-Systems:"
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-"\t* <b>Perfekte</b> Systemsicherheit (automatische Softwareaktualisierungen)."
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-"\t* <b>Benachrichtigung</b> über Aktualisierungen (durch E-Mail oder durch "
-"ein Applet auf dem Desktop)."
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr "\t* Flexible <b>planmäßige</b> Aktualisierungen."
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-"\t* Verwaltung <b>all Ihrer Mandriva Linux-Systeme</b> mit einem Konto."
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-"Benötigen Sie <b>Unterstützung?</b> Treffen Sie Mandrivas Technikexperten "
-"auf <b>unserer technischen Supportplattform</b> www.mandrivaexpert.com."
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-"Dank der <b>qualifzierten Mandriva Linux-Experten</b> werden Sie eine Menge "
-"Zeit sparen."
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-"Zu jeder Frage bezüglich Mandriva Linux können Sie Support unter <b>store."
-"mandriva.com</b> kaufen."
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Büro-Arbeitsplatz"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Office-Programme: Textverarbeitung (Openoffice.org Writer, KWord), "
-"Tabellenkalkulation (OpenOffice.org Calc, KSpread), PDF-Betrachter, usw."
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Office-Programme: Textverarbeitung (KWord, Abiword), Tabellenkalkulation "
-"(KSpread, Gnumeric), PDF-Betrachter, usw."
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Spiele-Station"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Spiele: Arcade-, Brett-, Strategiespiele, usw."
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Multimedia-Station"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Programme, um Sound und Video abzuspielen und zu bearbeiten"
-
-#
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Internet-Station"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Programme um E-Mails und News zu lesen und zu versenden (pine, mutt, tin..) "
-"und um im Internet zu surfen"
-
-#
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Netzwerk-Computer (Client)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Clients für verschiedene Protokolle, u.a. SSH"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Konfiguration"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Werkzeuge, die die Konfiguration Ihres Computers erleichtern"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Konsolen-Werkzeuge"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Editoren, Shells, Dateiwerkzeuge, Konsolen"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C und C++ Entwicklungsbibliotheken, Programme und Include-Dateien"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Dokumentation"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Bücher und HOWTOs zu GNU/Linux und Freier Software"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Linux-Standard-Base. Drittanbieterunterstützung"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, c-format
-msgid "Groupware"
-msgstr "Groupware"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Kolab-Server"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Firewall / Router"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Internet-Gateway"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "E-Mail/News"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix Mail-Server, Inn News-Server"
-
-#: share/compssUsers.pl:100
-#, c-format
-msgid "Directory Server"
-msgstr "Verzeichnisdienst"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "FTP-Server"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Domänennamen- und Netzwerk-Informations-Server"
-
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Datei- und Druckerserver"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "NFS-Server, Samba Server"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Datenbank"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "PostgreSQL und MySQL-Datenbankserver"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Email"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Postfix Mail-Server"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "PostgreSQL oder MySQL-Datenbankserver"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Netzwerkrechner-Server"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr "NFS-Server, SMB-Server, Proxy-Server, SSH-Server"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "KDE-Arbeitsplatz"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-"Die K-Desktop-Umgebung, die Standard-Arbeitsfläche mit einer Sammlung "
-"zugehöriger Programme"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Gnome-Arbeitsplatz"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-"Eine grafische Umgebung mit anwenderfreundlichen Anwendungen und Werkzeugen"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Andere grafische Arbeitsflächen"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, usw."
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Werkzeuge"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "SSH-Server"
-
-#: share/compssUsers.pl:186
-#, c-format
-msgid "Webmin"
-msgstr "Webmin"
-
-#: share/compssUsers.pl:187
-#, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Webmin Fernkonfigurationsserver"
-
-#: share/compssUsers.pl:191
-#, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Netzwerkwerkzeuge/-überwachung"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr "Überwachungswerkzeuge, Prozessverwaltung, tcpdump, nmap, ..."
-
-#: share/compssUsers.pl:196
-#, c-format
-msgid "Mandriva Wizards"
-msgstr "Mandriva-Assistenten"
-
-#: share/compssUsers.pl:197
-#, c-format
-msgid "Wizards to configure server"
-msgstr "Assistenten zur Servereinrichtung"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Archivierungs- und Restaurierungs-Programm\n"
-"\n"
-"--default        - Speichern der Standardverzeichnisse.\n"
-"--debug          - Ausgabe aller Debug-Informationen.\n"
-"--show-conf      - Liste der zu archivierenden Dateien/Verzeichnisse.\n"
-"--config-info    - Erklärung der Konfigurationsdatei-Parameter (für nicht-X "
-"Anwender).\n"
-"--daemon         - Verwende die Dienst-Konfiguration. \n"
-"--help           - Ausgabe dieses Hilfetextes.\n"
-"--version        - Ausgabe der Versionsnummer.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-"[--boot] [--splash]\n"
-"Optionen:\n"
-"  --boot             - ermöglicht die Konfiguration des Bootloaders\n"
-"  --splash           - ermöglicht die Konfiguration des Boot-Designs\n"
-"Standard-Modus: Bietet die Konfiguration des AutoLogin-Features an"
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[OPTIONEN] [PROGRAMMNAME]\n"
-"\n"
-"OPTIONEN:\n"
-"  --help            - Asgabe dieses Hilfetextes.\n"
-"  --report          - Name eines Mandriva Linux-Werkzeuges.\n"
-"  --incident        - Name eines Mandriva Linux-Werkzeuges."
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-"[--add]\n"
-"  --add             - \"Netzwerkschnittstelle hinzufügen\"-Assistent\n"
-"  --del             - \"Netzwerkschnittstelle entfernen\"-Assistent\n"
-"  --skip-wizard     - Verwaltet Verbindungen\n"
-"  --internet        - Internetzugang einrichten\n"
-"  --wizard          - wie --add"
-
-#: standalone.pm:69
-#, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"Schriftarten-Import und Programmüberwachung\n"
-"\n"
-"OPTIONEN:\n"
-"--windows_import : import von allen verfügbaren Windowspartitionen.\n"
-"--xls_fonts      : zeige alle Schriftarten, die schon von xls existieren\n"
-"--install        : akzeptiere alle Schriftartendateien und alle "
-"Verzeichnisse.\n"
-"--uninstall      : deinstalliere alle Schriftartendateien und alle "
-"Verzeichnisse.\n"
-"--replace        : ersetze alle Schriftarten, wenn sie schon existieren\n"
-"--application    : 0 keine Anwendung.\n"
-"                 : 1 alle verfügbaren Anwendungen unterstützt.\n"
-"                 : name_der_anwendung, wie so für Staroffice \n"
-"                 : und gs für ghostscript für nur dieses."
-
-#: standalone.pm:84
-#, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPTIONEN]...\n"
-"Mandriva Terminal-Server-Konfigurator\n"
-"--enable         : MTS einschalten\n"
-"--disable        : MTS ausschalten\n"
-"--start          : MTS starten\n"
-"--stop           : MTS anhalten\n"
-"--adduser        : einen existierenden Systemnutzer zu MTS hinzufügen "
-"(benötigt Nutzernamen)\n"
-"--deluser        : einen existierenden Systemnutzer von MTS löschen "
-"(benötigt Nutzernamen)\n"
-"--addclient      : einen Client zu MTS hinzufügen (benötigt MAC Adresse, IP, "
-"Name des NBI-Abbildes)\n"
-"--delclient      : einen Client von MTS löschen (benötigt MAC Adresse, IP, "
-"Name des NBI-Abbildes)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[Tastatur]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=datei] [--word=word] [--explain=ausdruck] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Anwendung zur Verbindung und Überwachung von Netzwerk und Internet\n"
-"\n"
-"--defaultintf interface : zeige diese Schnittstelle als Voreinstellung\n"
-"--connect : verbinde mit dem Internet wenn nicht schon verbunden\n"
-"--disconnect : trenne vom Internet wenn verbunden\n"
-"--force : bei (dis)connect : erzwinge Verbinden/Trennen.\n"
-"--status : gibt 1 zurück wenn verbunden sonst 0, beendet sich danach.\n"
-"--quiet : nicht interaktiv. benutzt mit (dis)connect."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-"  --no-confirmation      keine Fragen im Mandriva Update-Modus stellen\n"
-"  --no-verify-rpm        Paketsignaturen nicht überprüfen\n"
-"  --changelog-first      Änderungsprotokoll vor Dateiliste anzeigen\n"
-"  --merge-all-rpmnew     Zusammenlegen aller .rpmnew/.rpmsave-Dateien "
-"vorschlagen"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Verwendung: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Sie müssen neustarten, damit die Änderungen  wirksam werden"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Bitte melden Sie sich ab und drücken Sie Ctrl-Alt-Rücktaste"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-"Sie müssen sich abmelden und wieder anmelden, damit die Änderungen  wirksam "
-"werden"
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr "Nicht sinnvoll ohne Terminal Server"
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr "%s: %s benötigt einen Benutzernamen...\n"
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-"%s: %s benötigt Rechnername, MAC Adresse, IP, nbi-image, 0/1 für "
-"THIN_CLIENT, 0/1 für Lokale Konfiguration ...\n"
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr "%s: %s benötigt hostname...\n"
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, c-format
-msgid "Terminal Server Configuration"
-msgstr "Terminal-Server-Konfiguration"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Server aktivieren"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Server deaktivieren"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Server starten"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Server stoppen"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Diskette/ISO"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Net Boot Images"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Benutzer hinzufügen/löschen"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Clients hinzufügen/löschen"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Abbilder"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr "Clients/Benutzer"
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "First Time Assistent"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-"%s als dm definiert, der gdm-Benutzer wird zu /etc/passwd$$CLIENT$$ "
-"hinzugefügt"
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-"\n"
-"Dieser Assistent wird:\n"
-"\t1) Fragen ob Sie entweder „schmaler“ oder „fetter“ Client sein wollen.\n"
-"\t2) DHCP einrichten.\n"
-"\t\n"
-"    a) Allenbis.                                                           \n"
-"    b) Aktivere "
-"denserver.                                                       \n"
-"    c) Starte "
-"denserver.                                                       \n"
-"    d) Synchronisiere die Schattendateien so dass alle Benutzer, "
-"einschließlich root,\n"
-"        hinzugefügt werden zur shadow$$CLIENT$$ "
-"Datei.                                                         \n"
-"    e) Nachfragen, ob er eine Startdiskette erstellen soll.\n"
-"    f) Im Falle eines Thin-Clients nachfragen, ob KDM neu gestartet werden "
-"soll.\n"
-
-#: standalone/drakTermServ:378
-#, c-format
-msgid "Cancel Wizard"
-msgstr "Assistent abbrechen"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr "Bitte die DHCP-Konfigurationsdatei speichern!"
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr "Benutze Thin-Clients"
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr "Gleiche Client-X-Tastatureinstellungen mit dem Server ab."
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-"Bitte wählen sie den Standard-Client-Typ.\n"
-"....„Thin“-Clients führen alles auf CPU/RAM vom Server aus und nutzen das "
-"Display des Clients.\n"
-"....„Fat“-Clients benutzen ihre eigene CPU/RAM und das Dateisystem des "
-"Servers."
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr "Erzeuge Startabbilder zum Netzwerk-Start für alle Kernel"
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Dies wird einige Minuten dauern."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, c-format
-msgid "Done!"
-msgstr "Fertig!"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-"Gleiche die serverseitige Benutzerliste mit der des Clients ab, inklusive "
-"root."
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-"Um die Änderungen wirksam zu machen für den Thin-Client muss der Display-"
-"Manager neu gestartet werden. Soll dies jetzt geschehen?"
-
-#: standalone/drakTermServ:537
-#, c-format
-msgid "Terminal Server Overview"
-msgstr "Terminal-Server-Überblick"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-"         - Erzeuge „Etherboot“bare Startabbilder:\n"
-"         \tUm einen Kernel über Etherboot zu laden muss ein speziellen "
-"kernel/initrd-Abbild erzeugt werden.\n"
-"         \tmkinitrd-net erledigt einen großen Teil dieser Arbeit. "
-"DrakTermServ ist nur eine grafische Schnitt-\n"
-"         \tstelle die bei der Verwaltung dieser Abbilder unstützt. Zum "
-"erstellen der Datei \n"
-"         \t/etc/dhcpd.conf.etherboot-pcimap.include, die von dhcpd.conf als "
-"Include-Datei hinzugezogen\n"
-"         \twird, sollten Sie mindestens für einen Kernel Etherboot-"
-"Startabbilder erzeugen."
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-"         - Pflege von /etc/dhcpd.conf:\n"
-"         \tUm Clients über das Netzwerk zu starten benötigt jeder Client "
-"einen Eintrag\n"
-"         \tin dhcpd.conf, der dem Rechner eine IP-Adresse und "
-"netzwerkfähige\n"
-"         \tStartabbilder zuweist. DrakTermServ hilft beim Erzeugen/"
-"Entfernen\n"
-"         \tdieser Einträge.\n"
-"\t\t\t\n"
-"         \t(PCI-Karten könnten das Image ablehnen - Etherboot wird das "
-"richtige Image anfragen.\n"
-"\t\t\tSie sollten weiter bedenken, dass Etherboot bei der Suche eines "
-"Abbilds Einträge wie \n"
-"\t\t\tboot-3c59x.nbi anstelle von boot-3c59x.2.4.19-16mdk.nbi erwartet).\n"
-"\t\t\t \n"
-"         \tEine typische dhcpd.conf ??stanza to support?? diskettenlose "
-"Clients wie:"
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-"        Obwohl Sie einen Bereich von IP-Adressen verwenden können, anstatt "
-"für\n"
-"         jeden Client ein spezifisches Setup, erleichtert ein feste "
-"Adressvergabe die \n"
-"        Client-spezifischen Einstellungen die ClusterNFS anbietet.\n"
-"\t\t\t\n"
-"        Anmerkung: Der „#type“-Eintrag wird nur von drakTermServ benutzt. "
-"Clients\n"
-"        können entweder  „schlank“ oder „voll“ sein.\n"
-"        Schlanke Clients starten die meisten Programme auf dem Server "
-"mittels XDMCP, \n"
-"        während volle Clients die meisten Programme auf dem Client selbst "
-"starten.\n"
-"        Eine besondere inittab, %s wurde für schlanke Clients geschrieben.\n"
-"        Die System-Konfigurationsdateien xdm-config, kdmrc, und gdm.conf "
-"werden \n"
-"        modifiziert falls schlanke Clients benutzt werden, um XDMCP zu "
-"ermöglichen.\n"
-"        Aufgrund von Sicherheitsproblemen in XDMCP werden die Dateien hosts."
-"deny\n"
-"        und hosts.allow are modifiziert umd den Zugang auf das lokale "
-"Netzwerk\n"
-"        zu beschränken.\n"
-"\t\t\t\n"
-"        Anmerkung: Der „#hdw_config“-Eintrag wird nur vondrakTermServ. "
-"benutzt.\n"
-"        Clients kann entweder „richtig“ oder „falsch“ sein.  „richtig“ "
-"erlaubt den Root-\n"
-"        Zugang auf dem Client-Rechner und ermöglicht Geräte-Einstellungen "
-"für\n"
-"        Sound, Maus und X, wobei die „Drak“-Werkzeuge benutzt werden.\n"
-"        Dies wird ermöglicht durch das Erstellen seperater "
-"Konfigurationsdateien.\n"
-"        Diese werden mit den IP-Adressen der Clients assoziiert. Das "
-"Erzeugen von Lese-/\n"
-"        Schreib-Einhängepunkte um das clientseitige Ändern der Datei zu "
-"erlauben.\n"
-"        Sobald Sie mit den Einstellungen des Clients zufrieden sind können "
-"Sie den\n"
-"        Root-Zugang auf dem Client enfernen.\n"
-"\t\t\t\n"
-"        Anmerkung: Sie müssen den Server neu starten nach dem Ändern oder "
-"Hinzufügen\n"
-"        von Clients."
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-"        - Wartung von /etc/exports:\n"
-"        \tClusternfs erlaubt den Export des Wurzeldateisystems an "
-"festplattenlose Clients. drakTermServ\n"
-"        \tstellt die korrekten Einträge ein, um anonymen Zugriff zum "
-"Wurzeldateisystem von \n"
-"        \tfestplattenlosen Clients zu erlauben.\n"
-"\n"
-"        \tEin typischer exports Eintrag für clusternfs ist:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNETZ/MASKE(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tMit SUBNETZ/MASKE definiert für Ihr Netzwerk."
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-"        - %s warten:\n"
-"        \tUm Benutzern von diskettenlosen Clients das Einloggen zu erlauben, "
-"muss ihr Eintrag in\n"
-"         \t/etc/shadow dupliziert werden nach %s. drakTermServ\n"
-"        \tunterstützt dies durch das Hinzufügen oder Entfernen der Benutzer "
-"aus dieser Datei."
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-"        - Pro Client %s:\n"
-"        \tDurch ClusterNFS hat jeder Client seine eigenen, eigenständigen "
-"Konfigurationsdateien\n"
-"        \tauf dem root-Dateisystem des Servers. Durch das Erlauben Client-"
-"seitiger Geräteeinstellungen\n"
-"         \thilft drakTermServ beim Erzeugen dieser Dateien."
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-"        - Pro Client System-Konfigurationsdateien:\n"
-"        \tDurch ClusterNFS hat jeder Client seine eigenen, eigenständigen "
-"Konfigurationsdateien\n"
-"        \tauf dem root-Dateisystem des Servers. Durch das Erlauben Client-"
-"seitiger\n"
-"        \tGeräteeinstellungen können Clients Dateien wie /etc/modules.conf,\n"
-"        \t/etc/sysconfig/mouse oder /etc/sysconfig/keyboard auf Client-"
-"Basis\n"
-"\t\tanpassen.\n"
-"\n"
-"        Anmerkung: Das Erlauben lokaler Client-Geräteeinstellungen "
-"ermöglicht Root-Zugang zum\n"
-"\tTerminal-Server auf jedem Client, der diese Funktion aktiviert hat. Die "
-"lokale Konfiguration\n"
-"\tkann wieder ausgeschaltet werden unter Beibehaltung der Einstellungen, "
-"sobald der Client\n"
-"\teingerichtet ist."
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ wird diese Datei so einrichten, dass sie mit den "
-"Abbildern, die\n"
-"        \tdurch mkinitrd-net erstellt wurden, zusammenspielt und den "
-"Einträgen in\n"
-"        \t/etc/dhcpd.conf, um die Startabbilder jedem festplattenlosen "
-"Client zur\n"
-"        \tVerfügung zu stellen.\n"
-"\n"
-"        \tEine typische TFTP-Konfigurationsdatei sieht so aus:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tDie Änderungen hier von der Standardinstallation ändern den "
-"disable-Schalter auf „no“\n"
-"        \tund setzen den Verzeichnispfad auf /var/lib/tftpboot, wo mkinitrd-"
-"net seine Abbilder        \tablegt."
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Bootdiskette"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "Boot ISO"
-
-#: standalone/drakTermServ:670
-#, c-format
-msgid "PXE Image"
-msgstr "PXE-Abbild"
-
-#: standalone/drakTermServ:731
-#, c-format
-msgid "Default kernel version"
-msgstr "Standard-Kernelversion"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr "Erzeuge PXE Abbilder."
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Ganzen Kernel erstellen -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Kein Kernel ausgewählt!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Erstelle einzelnen NIC -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "Keine Netzwerkkarte ausgewählt!"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr "Alle Kernel erstellen -->"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Löschen"
-
-#: standalone/drakTermServ:801
-#, c-format
-msgid "No image selected!"
-msgstr "Kein Abbild ausgewählt!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Alle NBIs löschen"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! Zeigt an, dass das Passwort in der Systemdatenbank sich von dem\n"
-"in der Terminal Server Datenbank unterscheidet.\n"
-"Entfernen/erneutes Hinzufügen des Benutzers zum Terminal Server \n"
-"nötig, um das Anmelden zu ermöglichen."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Benutzer hinzufügen -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Benutzer löschen"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "Typ: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr "lokale Konfiguration: %s"
-
-#: standalone/drakTermServ:1014
-#, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr ""
-"Erlaube lokale Hardware-\n"
-"Konfiguration"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "Keine Net Boot Images erstellt!"
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr "Thin Client"
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr "Erlaube Thin Clients"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-"Gleiche Client-X-Tastatureinstellungen\n"
-"mit dem Server ab."
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Client hinzufügen -->"
-
-#: standalone/drakTermServ:1062
-#, c-format
-msgid "type: fat"
-msgstr "Typ: FAT"
-
-#: standalone/drakTermServ:1063
-#, c-format
-msgid "type: thin"
-msgstr "Typ: Thin"
-
-#: standalone/drakTermServ:1070
-#, c-format
-msgid "local config: false"
-msgstr "Lokale Einstellung: fehlerhaft"
-
-#: standalone/drakTermServ:1071
-#, c-format
-msgid "local config: true"
-msgstr "lokale Konfiguration: wahr"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Client bearbeiten"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr "Unterbinde die lokale Konfiguration"
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Client löschen"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "DHCP Konfigurieren ..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Sie müssen den Display-Manager neu starten, damit alle Änderungen\n"
-"wirksam werden. (Geben Sie auf der Konsole ein: service dm restart)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-"Thin-Clients werden nicht mit AutoLogin funktionieren. AutoLogin ausschalten?"
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr "Alle Clients werden %s benutzen."
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr "Subnetz:"
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Netzmaske:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Router:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnetzmaske:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Broadcast-Adresse:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Name der Domäne:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "DNS-Server:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Anfang des IP-Bereichs:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "Ende des IP-Bereichs:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr "TS Einfügungen an existierenden Konfiguration anhängen"
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Konfiguration speichern"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "dhcpd-Server-Konfiguration"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Die meisten Werte wuden Ihrem\n"
-"laufenden System entnommen.\n"
-"Sie können diese nach Bedarf anpassen."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Bitte legen Sie eine Diskette ein:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Kein Diskettenzugriff möglich!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Sie können die Diskette nun entfernen"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Kein Disketten-Laufwerk verfügbar!"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr "Netzstart-Abbild ist %s/%s"
-
-#: standalone/drakTermServ:1532
-#, c-format
-msgid "Error writing %s/%s"
-msgstr "Fehler beim Schreiben von %s/%s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO Image ist %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Es trat ein Fehler auf! Ist „mkisofs“ installiert?"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "„/etc/dhcpd.conf“ muss erst angelegt werden!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr "%s Passwort ungültig am Terminal-Server - schreibe neu...\n"
-
-#: standalone/drakTermServ:1737
-#, c-format
-msgid "%s is not a user..\n"
-msgstr "%s ist kein Benutzer...\n"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr "%s ist bereits ein Terminalserver-Benutzer\n"
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr "Hinzufügen von %s zum Terminal-Server fehlgeschlagen!\n"
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr "%s zum Terminalserver hinzugefügt\n"
-
-#: standalone/drakTermServ:1759
-#, c-format
-msgid "Deleted %s...\n"
-msgstr "%s gelöscht...\n"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, c-format
-msgid "%s not found...\n"
-msgstr "%s nicht gefunden...\n"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-"/etc/hosts.allow und /etc/hosts.deny sind bereits konfiguriert - keine "
-"Änderung"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr "Konfiguration geändert - Neustart von clusternfs/dhcpd?"
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Fehler!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Ich kann die benötigte Image-Datei „%s“ nicht finden."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Auto-Installationskonfigurator"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"Sie sind dabei, eine Auto-Installationsdiskette zu erstellen. Diese\n"
-"Möglichkeit ist gefährlich und sollte mit Vorsicht verwendet werden!\n"
-"\n"
-"Sie können mit diesem Werkzeug die Installation, die Sie vorher\n"
-"gemacht haben wiederholen, wobei Sie an einigen Stellen interaktiv\n"
-"Einfluss nehmen können.\n"
-"\n"
-"Aus Sicherheitsgründen wird die Partitionierung und Formatierung nie\n"
-"automatisch durchgeführt.\n"
-"\n"
-"Wollen Sie fortfahren?"
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "wiederholen"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "manuell"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Automatische Konfiguration der Schritte"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Bitte wählen Sie für jeden Schritt, ob er wie bei Ihrer Installation "
-"vorgenommen werden soll, oder ob Sie ihn manuell durchführen wollen."
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Erstellen einer Auto-Installationsdiskette"
-
-#: standalone/drakautoinst:90
-#, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr ""
-"Legen Sie eine weitere leere Diskette in das Laufwerk %s (für die "
-"Treiberdiskette)"
-
-#: standalone/drakautoinst:91
-#, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Erstelle Auto-Installationsdiskette (Treiberdiskette)"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Willkommen.\n"
-"\n"
-"Die Parameter der Auto-Installation sind in den Abschnitten rechts verfügbar."
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Herzlichen Glückwunsch!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die Diskette wurde erfolgreich erstellt.\n"
-"Sie können die Installation nun automatisch durchführen."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Auto-Installation"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Eintrag hinzufügen"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Letzten Eintrag entfernen?"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-"Expect ist eine Erweiterung der TCL Skriptsprache, die interaktive Sitzungen "
-"ohne Benutzereingriff erlaubt."
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr "Passwort dieses Systems in der DrakBackup Konfiguration speichern."
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-"Bei einer Multisession-CD wird nur die erste Session die CD-RW löschen. "
-"Andererseits muss die CD-RW vor jedem Backup gelöscht werden."
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-"Diese Option sichert Daten, die sich geändert haben. Das exakte Verhalten "
-"hängt davon ab, ob der inkrementelle oder differentielle Modus verwendet "
-"wird."
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-"Inkrementelle Sicherung speichert nur Dateien, die sich geändert haben oder "
-"seit der letzten Sicherung neu hinzugekommen sind."
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-"Inkrementelle Archivierung speichert nur Dateien, die seit der letzten "
-"kompletten Archivierung verändert wurden."
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-"Dies sollte ein lokaler Benutzer oder eine Emailadresse sein, der das "
-"Ergebnis der Sicherung zugestellt wird. Sie müssen einen funktionierenden "
-"Mailserver angeben."
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-"Dateien sowie Platzhalter in „.backupignore“ Dateien im Startverzeichnis "
-"eines Verzeichnisbaums werden nicht archiviert."
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-"Bei Sicherung auf andere Medien wird dennoch zuerst eine Datei auf der "
-"Festpaltte erstellt, anschließend auf das andere Medium kopiert. Aktivierung "
-"dieser Möglichkeit, sorgt für das Löschen der Kopie auf der Platte nach "
-"beendeter Sicherung."
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-"Einige Protokolle wie z.B. rsync müssen letztendlich auf dem Server "
-"konfiguriert werden. Anstelle des Verzeichnispfads kann auch der Modulname "
-"als Name für den Dienste-Pfad gelten."
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-"Custom erlaubt das Eingeben von beliebigem Tag und Zeit. Die anderen "
-"Optionen benutzen laufende Teile in /etc/crontab."
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr "Kein Medium ausgewählt für die cron-Operation."
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr "Kein Intervall ausgewählt für die cron-Operation."
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Cron ist nicht für unprivilegierte Kennzeichen nutzbar"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-"„%s“ ist weder eine zulässige Emailadresse noch ein existierender lokaler "
-"Benutzer!"
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-"„%s“ ist ein lokaler Benutzer, aber Sie haben keinen lokalen SMTP-Server "
-"ausgewählt. Sie müssen deshalb eine vollständige Emailadresse benutzen!"
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-"Liste der gültigen Benutzer hat sich geändert, aktualisiere "
-"Konfigurationsdatei"
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr "Liste alter Benutzer:\n"
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr "Liste der neuen Benutzer:\n"
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      DrakBackup-Report \n"
-"\n"
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      DrakBackup Dämon-Report\n"
-"\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup-Report-Details\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, c-format
-msgid "Total progress"
-msgstr "Fortschritt (komplett)"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s existiert, soll ich es löschen?\n"
-"\n"
-"Wenn Sie dies schon gemacht haben, müssen Sie wahrscheinlich\n"
-"den Eintrag in der Datei authorized_keys auf dem Server löschen."
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Das Generieren der Schlüssel kann einen Moment dauern."
-
-# spawn=laichen?????????????
-#: standalone/drakbackup:612
-#, c-format
-msgid "Cannot spawn %s."
-msgstr "Kann auf %s nicht zugreifen."
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Keine Passwortaufforderung auf %s am Port %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Falsches Passwort auf %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Zugriff verweigert beim Übertragen von %s nach %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Kann %s auf %s nicht finden"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "%s anwortet nicht"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"Übertragung erfolgreich\n"
-"Probieren Sie das Anmelden auf dem Server mit dem Befehl:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"ohne das Sie jetzt nach einem Passwort gefragt werden."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "Keine CD/DVDR im Laufwerk!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Das Medium ist nicht beschreibbar!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Das Medium ist nicht löschbar!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Das Löschen des Mediums kann einen Moment dauern."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Problem beim Zugriff auf die CD."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "Es liegt kein Band in %s!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Systemdateien sichern ..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Backup-Dateien auf der Festplatte ..."
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Benutzerdateien sichern ..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Andere Dateien sichern ..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Festplattenbackup in Bearbeitung ..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Keine Änderungen zu sichern!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"DrakBackup Aktivitäten via %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" FTP-Verbindungsproblem: Es war nicht möglich, Ihre Dateien per FTP zu "
-"übertragen.\n"
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-"Fehler bei der Übertragung via FTP.\n"
-" Bitte korrigieren Sie Ihre FTP-Konfiguration."
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr "Dateiliste gesendet per FTP: %s\n"
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup Aktivitäten über CD:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Drakbackup-Aktivitäten über Bandlaufwerk:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr "Fehler beim E-Mail-Versandt. Ihr Bericht wurde nicht gesendet."
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr " Fehler beim Verschicken der E-Mail. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Ich kann den Katalog nicht erstellen!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Bitte wählen Sie alle benötigten Parameter.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Diese Optionen kann alle Ihre Dateien im Verzeichnis „/etc“ sichern und "
-"wiederherstellen\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Sichern Sie Ihre Systemdateien. (Verzeichnis /etc)."
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr "Inkrementelle Archivierung (alte Archive nicht ersetzen)"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr "Inkrementelle Archivierung"
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr "Differentielles Backup verwenden"
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Keine kritischen Dateien (passwd, group, fstab) archivieren"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Mit dieser Option sind Sie in der Lage, jede Version Ihres \n"
-"„/etc“ Verzeichnisses wiederherzustellen."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Bitte wählen Sie alle Benutzer, deren Dateien mitgesichert werden sollen."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "Die Browser-Caches nicht archivieren"
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr "Wählen Sie die Dateien oder Verzeichnisse und drücken Sie auf „OK“."
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Markierte entfernen"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Benutzer"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Netzwerkverbindung zur Datensicherung verwenden"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Netz-Methode:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr "Benutze Expect für SSH"
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr "Erzeuge/Übertrage Backup Schlüssel für SSH"
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr "Übertrage jetzt"
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Andere (nicht drakbackup) gegenwärtige Schlüssel"
-
-#: standalone/drakbackup:1610
-#, c-format
-msgid "Host name or IP."
-msgstr "Rechnername oder IP"
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-"Bitte geben Sie das Verzeichnis (oder Modul) an,\n"
-"in dem die Archive auf diesem Rechner erstellt werden sollen."
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Passwort behalten"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Brauche Rechnername, Benutzername und Passwort!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Sicherungskopie auf CD/DVD-ROM"
-
-#: standalone/drakbackup:1737
-#, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Bitte wählen Sie ihr CD/DVD-Gerät"
-
-#: standalone/drakbackup:1742
-#, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Bitte wählen Sie die Größe der CD/DVD-Medien"
-
-#: standalone/drakbackup:1749
-#, c-format
-msgid "Multisession CD"
-msgstr "Multisession CD"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr "CD-RW Medium"
-
-#: standalone/drakbackup:1757
-#, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "RW-Medium löschen (erste Session)"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr " Jetzt löschen"
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr "DVD+RW Medien"
-
-#: standalone/drakbackup:1766
-#, c-format
-msgid "DVD-R media"
-msgstr "DVD-R Medien"
-
-#: standalone/drakbackup:1768
-#, c-format
-msgid "DVDRAM device"
-msgstr "DVD-RAM Laufwerk"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "Kein CD-Gerät angegeben!"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Auf Bandlaufwerk sichern"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr "Bitte geben Sie den Gerätenamen für Archivierung an."
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr "Datensicherung direkt auf Band"
-
-#: standalone/drakbackup:1856
-#, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Band nach der Sicherung nicht zurückspulen"
-
-#: standalone/drakbackup:1862
-#, c-format
-msgid "Erase tape before backup"
-msgstr "Band vor Sicherung löschen"
-
-#: standalone/drakbackup:1868
-#, c-format
-msgid "Eject tape after the backup"
-msgstr "Band nach der Sicherung auswerfen"
-
-#: standalone/drakbackup:1944
-#, c-format
-msgid "Enter the directory to save to:"
-msgstr "Eingabe des Sicherungsverzeichnisses:"
-
-#: standalone/drakbackup:1948
-#, c-format
-msgid "Directory to save to"
-msgstr "Verzeichnis, in das gespeichert wird"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CD-ROM / DVD-ROM"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Festplatte/NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "stündlich"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "täglich"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "wöchentlich"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "monatlich"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "Benutzerdefiniert"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Januar"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Februar"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "März"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "April"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Mai"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Juni"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Juli"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "August"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "September"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Oktober"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "November"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Dezember"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Sonntag"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Montag"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Dienstag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Mittwoch"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Donnerstag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Freitag"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Samstag"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Dämon verwenden"
-
-#: standalone/drakbackup:2100
-#, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Bitte wählen Sie das Zeitintervall zwischen zwei Sicherungen."
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr "Angepasster setup/crontab Eintrag"
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Minute"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Stunde"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Tag"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Monat"
-
-#: standalone/drakbackup:2127
-#, c-format
-msgid "Weekday"
-msgstr "Wochentag"
-
-#: standalone/drakbackup:2133
-#, c-format
-msgid "Please choose the media for backup."
-msgstr "Bitte wählen Sie ein Sicherungsmedium."
-
-#: standalone/drakbackup:2139
-#, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Stellen Sie sicher, dass der Cron-Dämon als Dienst aktiviert ist."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-"Wenn Ihr Rechner nicht die ganze Zeit eingeschaltet ist, sollten Sie anacron "
-"installieren."
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-"Beachten Sie, dass gegenwärtig alle „Netzmedien“ ebenfalls die Festplatte "
-"nutzen."
-
-#: standalone/drakbackup:2188
-#, c-format
-msgid "Please choose the compression type"
-msgstr "Bitte wählen Sie den Kompressionstyp"
-
-#: standalone/drakbackup:2192
-#, c-format
-msgid "Use .backupignore files"
-msgstr "Verwende .backupignore Dateien"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr "E-Mail-Bericht nach jedem Sicherungsvorgang an: "
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, c-format
-msgid "SMTP server for mail:"
-msgstr "SMTP server für mail:"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-"Nach dem Backup auf ein anderes Medium die tar-Dateien von der Festplatte "
-"löschen."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Was"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Wo"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Wann"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Mehr Parameter"
-
-#: standalone/drakbackup:2282
-#, c-format
-msgid "Backup destination not configured..."
-msgstr "Das Zielverzeichnis ist noch nicht konfiguriert..."
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "DrakBackup-Konfiguration"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Bitte wählen Sie wohin Sie die Sicherungskopien machen wollen."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "Festplatte, die zu Sicherung aller Medien genutzt wird"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "über Netzwerk"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "auf CD-ROM"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "auf Bandlaufwerk (Streamer)"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Benutzer sichern"
-
-#: standalone/drakbackup:2368
-#, c-format
-msgid " (Default is all users)"
-msgstr " (Standard: alle Benutzer)"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Bitte wählen Sie, was Sie sichern wollen"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "System sichern"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Benutzer auswählen"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Bitte wählen Sie die zu sichernden Daten..."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"Sicherungsquellen: \n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Systemdateien:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Benutzerdateien:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Sonstige Dateien:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Auf Festplatte sichern unter: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr "\tPlattenplatz auf %s MB begrenzen\n"
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Nach dem Backup die tar-Dateien von der Festplatte löschen.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- Auf CD brennen"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "Wiederbeschreibbar"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr " an Gerät: %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr " (Multisession)"
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Auf Band an Gerät %s sichern"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tLöschen=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr "\tDatensicherung direkt auf Band\n"
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-"- via %s auf Rechner %s sichern\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t Benutzer: %s\n"
-"\t\t Pfad: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Optionen:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tKeine Systemdateien\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tSicherungen verwenden „tar“ und „bzip2“\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tSicherungen verwenden „tar“ und „gzip“\n"
-
-#: standalone/drakbackup:2518
-#, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tSicherungen verwenden nur„tar“\n"
-
-#: standalone/drakbackup:2520
-#, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "\t“.backupignore“-Dateien verwenden.\n"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr "\tSendw Email an %s\n"
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "\tVerwende SMTP-Server %s\n"
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Dämon (%s) über:\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t* Festplatte.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t* CD-ROM.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Band \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t* Netzwerk per FTP.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t* Netzwerk per SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t* Netzwerk per rsync.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-"Keine Konfiguration. Wählen Sie den Assistenten oder Fortgeschritten.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Liste der wiederherzustellenden Daten:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, c-format
-msgid "- Restore System Files.\n"
-msgstr "- Systemdateien wiederherstellen.\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr "   - von Datum: %s %s\n"
-
-#: standalone/drakbackup:2545
-#, c-format
-msgid "- Restore User Files: \n"
-msgstr "- Nutzerdateien wiederherstellen: \n"
-
-#: standalone/drakbackup:2550
-#, c-format
-msgid "- Restore Other Files: \n"
-msgstr "- Andere Dateien wiederherstellen: \n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Liste der beschädigten Daten:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr ""
-"Bitte entfernen Sie die Markierung oder löschen Sie sie das nächste Mal."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Die Sicherungen sind beschädigt."
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "            Alle Ihre gewählten Daten wurden            "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "    erfolgreich auf %s wiederhergestellt   "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "    Konfiguration wiederherstellen   "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "Bereit um die anderen Dateien wiederherzustellen"
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-"Liste wiederherzustellender Benutzer (letztes Datum pro Benutzer ist wichtig)"
-
-#: standalone/drakbackup:2992
-#, c-format
-msgid "Please choose the date to restore:"
-msgstr "Bitte die Daten zum Wiederherstellen auswählen:"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Von Festplatte wiederherstellen"
-
-#: standalone/drakbackup:3031
-#, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Bitte geben Sie das Verzeichnis an, in dem die Sicherungskopien liegen"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr "Verzeichnisse mit Datensicherungen"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Wählen Sie ein anderes Medium von dem Sie wiederherstellen wollen."
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Anderes Medium"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "System wiederherstellen"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Benutzer wiederherstellen"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Sonstiges wiederherstellen"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "Pfad zum Wiederherstellen auswählen (anstatt /)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, c-format
-msgid "Path To Restore To"
-msgstr "Pfad zum Wiederherstellen zu"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-"Erstelle Sicherung vor dem Wiederherstellen (nur für inkrementelle "
-"Sicherungen)."
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "Verzeichnisse der Benutzer vor dem Wiederherstellen entfernen."
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-"Dateinamentext-Unterstring nach dem gesucht wird (leerer String findet "
-"alles!):"
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr "Durchsuche Sicherheitskopien"
-
-#: standalone/drakbackup:3215
-#, c-format
-msgid "No matches found..."
-msgstr "Kein Treffer gefunden..."
-
-#: standalone/drakbackup:3219
-#, c-format
-msgid "Restore Selected"
-msgstr "Markierte Dateien wiederherstellen"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-"Klicken Sie auf Datum/Zeit um die Sicherungsdateien zu sehen.\n"
-"Strg-Klick Dateien um mehrere Dateien auszuwählen."
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-"Ausgewählte Katalogeinträge\n"
-"wieder herstellen"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Markierte Dateien\n"
-"wiederherstellen"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "Backup-Dateien nicht unter %s gefunden."
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Von CD wiederherstellen"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-"Legen Sie die CD mit Namen %s\n"
-"in das CD-Laufwerk, eingebunden unter /mnt/cdrom"
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Nicht die korrekte CD. Die richtige CD heißt %s"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Von Band wiederherstellen"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"Legen Sie das Band mit dem Namen %s\n"
-"in das Bandlaufwerkgerät %s"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Nicht das richtige Band. Das richtige Band heißt %s"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Über Netzwerk wiederherstellen"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Wiederherstellen mit Netzwerkprotokoll: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Rechnername"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr "Rechnerpfad oder Modul"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Passwort nötig"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Benutzername nötig"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "Rechnername nötig"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Pfad oder Modul benötigt"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr "Dateien wiederhergestellt..."
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Wiederherstellen fehlgeschlagen..."
-
-#: standalone/drakbackup:3541
-#, c-format
-msgid "%s not retrieved..."
-msgstr "%s nicht wiedergefunden..."
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, c-format
-msgid "Search for files to restore"
-msgstr "Suche wiederherzustellende Dateien."
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Alle Sicherungen wiederherstellen"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Benutzerdefinierte Wiederherstellung"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Wiederherstellen aus Katalog"
-
-#: standalone/drakbackup:3799
-#, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Kann kein Archiv zum Wiederherstellen finden...\n"
-
-#: standalone/drakbackup:3800
-#, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Stellen Sie sicher, dass %s der richtige Pfad ist"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr " und die CD im Laufwerk ist"
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-"Datensicherung auf nicht-einbindbarem Medium - Katalog zum Wiederherstellen "
-"verwenden"
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "Aktuelle CD - fortfahren."
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr "Zum neuen Wiederherstellungsverzeichnis wechseln"
-
-#: standalone/drakbackup:3825
-#, c-format
-msgid "Directory To Restore From"
-msgstr "Wiederherstellungsverzeichnis"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Wiederherstellungs-Fortschritt"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Sicherung erstellen"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Wiederherstellen"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Die folgenden Pakete müssen installiert werden:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Bitte wählen Sie die wiederherzustellenden Daten..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Systemdateien sichern"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Benutzerdateien sichern"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Andere Dateien sichern"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Fortschritt"
-
-#: standalone/drakbackup:4195
-#, c-format
-msgid "Sending files by FTP"
-msgstr "Dateien mittels FTP übertragen"
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Sende Dateien ..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Jetzt Sicherung anhand der Konfigurationsdatei erstellen"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Sicherungskonfiguration anzeigen"
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Assistentengestützte Konfiguration"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Expertenkonfiguration"
-
-#: standalone/drakbackup:4309
-#, c-format
-msgid "View Configuration"
-msgstr "Einstellung anschauen"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr "Letzten Log Eintrag betrachten"
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Jetzt sichern"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Keine Konfigurationsdatei gefunden.\n"
-"Bitte wählen Sie den „Assistenten“ oder „Erweitert“."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "DrakBackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Datei"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Datei/B_eenden"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-"Ihr System-Starter ist nicht im Framebuffer-Modus. Um grafisches Starten zu "
-"aktivieren wählen Sie einen grafischen Videomodus im Konfigurationswerkzeug "
-"des System-Starters."
-
-#: standalone/drakboot:127
-#, c-format
-msgid "Do you want to configure it now?"
-msgstr "Möchten Sie es jetzt einstellen?"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Designs installieren"
-
-#: standalone/drakboot:138
-#, c-format
-msgid "Graphical boot theme selection"
-msgstr "Auswahl des grafischen Startthemas"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Thema"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Design in der\n"
-"Konsole anzeigen"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Ein neues Design erzeugen"
-
-#: standalone/drakboot:183
-#, c-format
-msgid "Default user"
-msgstr "Standardbenutzer"
-
-#: standalone/drakboot:184
-#, c-format
-msgid "Default desktop"
-msgstr "Standard Arbeitsumgebung"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Nein, ich will kein Autologin"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ich will Autologin mit diesem Benutzer und dieser Arbeitsumgebung"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "System-Modus"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Arbeitsoberfläche nach dem Hochfahren automatisch starten "
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-"Bitte wählen Sie einen Grafikmodus. Er wird auf alle unten ausgewählte "
-"Starteinträge angewendet.\n"
-"Stellen Sie sicher, dass Ihre Grafikkarte den ausgewählten Modus unterstützt."
-
-#: standalone/drakbug:41
-#, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Mandriva Linux Fehlerberichte"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Mandriva Linux Kontrollzentrum"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Synchronisationsprogramm"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Eingenständige Werkzeuge"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "MenuDrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Fernsteuerung"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Software-Verwaltung"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Windows-Migrationswerkzeug"
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "UserDrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Konfigurationsassistenten"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr "Wählen Sie ein Mandriva-Werkzeug:"
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-"oder Anwendungsname\n"
-"(oder ganzer Pfad):"
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Finde Pakete"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Paket:"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Kernel:"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-"Um eine Fehlerbericht abzugeben, klicken Sie auf den Knopf „Berichten“. Dies "
-"wird ein Webbrowser-Fenster auf %s öffnen wo sie das Forumlar ausfüllen "
-"müssen. Die oben dargestellten Informationen werden auf den Server "
-"übertragen werden. Nützliche Informationen in Ihrem Fehlerbericht sind die "
-"Ausgabe von lspci, die Kernelversion und /proc/cpuinfo."
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Bericht"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Nicht installiert"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Paket nicht installiert"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakClock"
-
-#: standalone/drakclock:39
-#, c-format
-msgid "not defined"
-msgstr "nicht definiert"
-
-#: standalone/drakclock:41
-#, c-format
-msgid "Change Time Zone"
-msgstr "Zeitzone ändern"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Zeitzone - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Ist Ihre Hardware Uhr auf GMT eingestellt?"
-
-#: standalone/drakclock:75
-#, c-format
-msgid "Network Time Protocol"
-msgstr "Netzwerk Zeitprotokoll (NTP)"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-"Dieser Computer kann seine Zeit mit einem\n"
-" Remote Time Server synchronisieren"
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Aktiviere das Network Time Protocol"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Server: "
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr "Konnte nicht mit %s synchronisieren."
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Zurücksetzen"
-
-#: standalone/drakclock:224
-#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr ""
-"Wir müssen das Paket „ntp“ installieren,\n"
-"um das Network Time Protocol anzuschalten\n"
-"\n"
-"Möchten Sie ntp installieren?"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netzwerk-Konfiguration (%d Karten)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Schnittstelle:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Bitte warten"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Schnittstelle"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Status"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Rechnername: "
-
-#: standalone/drakconnect:136
-#, c-format
-msgid "Configure hostname..."
-msgstr "Rechnername wählen ..."
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "LAN-Konfiguration"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Netzwerk konfigurieren"
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Anwenden"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Verbindungen verwalten"
-
-#: standalone/drakconnect:225
-#, c-format
-msgid "Device selected"
-msgstr "Gerät ausgewählt"
-
-#: standalone/drakconnect:307
-#, c-format
-msgid "IP configuration"
-msgstr "IP-Konfiguration"
-
-#: standalone/drakconnect:346
-#, c-format
-msgid "DNS servers"
-msgstr "DNS-Server"
-
-#: standalone/drakconnect:354
-#, c-format
-msgid "Search Domain"
-msgstr "Suche Domäne"
-
-#: standalone/drakconnect:362
-#, c-format
-msgid "static"
-msgstr "statisch"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Flusskontrolle"
-
-#
-#: standalone/drakconnect:527
-#, c-format
-msgid "Line termination"
-msgstr "Leitung getrennt"
-
-#: standalone/drakconnect:538
-#, c-format
-msgid "Modem timeout"
-msgstr "Modem-Zeit überschritten"
-
-#: standalone/drakconnect:542
-#, c-format
-msgid "Use lock file"
-msgstr "Sperrdatei benutzen"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr "Warten auf das Freizeichen vor dem Wählen"
-
-#: standalone/drakconnect:547
-#, c-format
-msgid "Busy wait"
-msgstr "Beschäftigt - Warten"
-
-#: standalone/drakconnect:552
-#, c-format
-msgid "Modem sound"
-msgstr "Modem-Ton"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Aktivieren"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Deaktivieren"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Medienklasse"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr " Modulname "
-
-#: standalone/drakconnect:606
-#, c-format
-msgid "Mac Address"
-msgstr "Hardware-Adresse"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Bus"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Standort auf dem Bus"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Ihr Rechner hat keine konfigurierte Netzwerkkarte. Bitte verwenden Sie erst "
-"HardDrake, bevor Sie weiter machen."
-
-#: standalone/drakconnect:715
-#, c-format
-msgid "Remove a network interface"
-msgstr "Eine Netzwerkkarte entfernen"
-
-#: standalone/drakconnect:719
-#, c-format
-msgid "Select the network interface to remove:"
-msgstr "Wählen Sie das zu entfernende Netzwerkgerät aus:"
-
-#: standalone/drakconnect:751
-#, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Beim Entfernen des Netzwerks „%s“ trat ein Fehler auf: \n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr "Gratulation, die „%s“ Netzwerk Karte wurde erfolgreich gelöscht"
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr "Keine lP"
-
-#: standalone/drakconnect:769
-#, c-format
-msgid "No Mask"
-msgstr "Keine Maske"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr "einschalten"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "down"
-msgstr "ausschalten"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Verbunden"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Nicht Verbunden"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Trenne Verbindung ..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Verbinde ..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Deactivate now"
-msgstr "Jetzt deaktivieren"
-
-#: standalone/drakconnect:874
-#, c-format
-msgid "Activate now"
-msgstr "Jetzt aktivieren"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Sie haben noch keine Schnittstelle eingerichtet.\n"
-"Sie können dies tun, indem Sie die Schaltfläche \n"
-"„Konfigurieren“ betätigen."
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "LAN-Konfiguration"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Boot-Protokoll"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Beim Hochfahren gestartet"
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Diese Schnittstelle wurde noch nicht eingerichtet.\n"
-"Starten Sie den Assistenten „Schnittstelle hinzufügen“ im Mandriva Linux "
-"Kontrollzentrum."
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Sie haben noch keine eingerichtete Internetverbindung.\n"
-"Starten Sie den Assistenten „%s“ im Mandriva Linux Kontrollzentrum."
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Eine Netzwerkschnittstelle erstellen (LAN, ISDN, ADSL, ...)"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: standalone/drakconnect:1035
-#, c-format
-msgid "Third DNS server (optional)"
-msgstr "Dritter DNS-Server (optional)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Konfiguration der Internetverbindung"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Internetzugang"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Verbindungstyp: "
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Status:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr "GDM (GNOME Display Manager)"
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr "KDM (KDE Display Manager)"
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr "MdkKDM (Mandriva Linux Display Manager)"
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr "XDM (X Display Manager)"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Wähle einen Display-Manager"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Der X11-Display-Manager erlaubt das grafische Anmelden\n"
-"an das System, sowie das gleichzeitige Ausführen mehrerer verschiedener \n"
-"lokaler X-Sitzungen."
-
-#: standalone/drakedm:79
-#, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Die Änderungen wurden ausgeführt, soll ich den dm-Dienst neu starten?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-"Sie werden alle laufenden Programme beenden und Ihre aktuelle Sitzung "
-"beenden.Sind Sie sicher, dass Sie dem dm-Dienst neustarten wollen?"
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "DrakFloppy"
-
-#: standalone/drakfloppy:78
-#, c-format
-msgid "Boot disk creation"
-msgstr "Boot-Disketten-Erstellung"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Allgemein"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Gerät"
-
-#: standalone/drakfloppy:88
-#, c-format
-msgid "Kernel version"
-msgstr "Kernelversion"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Einstellungen"
-
-#: standalone/drakfloppy:117
-#, c-format
-msgid "Advanced preferences"
-msgstr "Erweiterte Einstellungen"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr " Größe "
-
-#: standalone/drakfloppy:139
-#, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "Optionale Parameter für „mkinitrd“"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "erzwingen"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "RAID-Module weglassen"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "falls nötig"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "SCSI-Module weglassen"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Modul hinzufügen"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Modul entfernen"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Stellen Sie sicher, dass ein Medium in Laufwerk %s liegt."
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"In Laufwerk %s liegt kein Medum oder es ist schreibgeschützt.\n"
-"Bitte legen Sie eins ein."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ich kann nicht teilen: %s"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "Floppy creation completed"
-msgstr "Diskette erfolgreich erstellt"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr "Das Erstellen der Bootdiskette wurde erfolgreich abgeschlossen \n"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Ich kann „mkbootdisk“ nicht richtig beenden: \n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Installierte Schriftarten suchen"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Auswahl installierter Schriftarten zurücksetzen"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "Alle Schriftarten analysieren"
-
-#: standalone/drakfont:210
-#, c-format
-msgid "No fonts found"
-msgstr "Keine Schriftarten gefunden"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "Fertig"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "Ich konnte keine Schriften in Ihren eingehängten Partitionen finden"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Neuwahl korrekter Schriftarten"
-
-#: standalone/drakfont:261
-#, c-format
-msgid "Could not find any font.\n"
-msgstr "Konnte keine Schriftarten finden.\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Suche installierter Schriften"
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr "%sSchriftkonvertierung"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Schriftarten-Kopie"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Installation von TrueType-Schriftarten"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "Bitte warten Sie - ttmkfdir arbeitet ..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "TrueType-Installation beendet"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "Erzeuge „type1inst“"
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscriptreferenz"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr "Temporäre Dateien löschen"
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Neustart des X-Font-Servers"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr "Schriftartdateien unterdrücken"
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "Neustart des X-Font-Servers"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Bevor Sie irgendwelche Schriftarten installieren, müssen Sie das Recht "
-"haben, diese zu verwenden und zu installieren.\n"
-"\n"
-"- Sie können die Schriftarten auf normalem Weg einbinden. In seltenen Fällen "
-"können defekte Schriftarten den X-Server lahmlegen."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr "DrakFont"
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Font-Liste"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Über"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Deinstallieren"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Importieren"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-"Copyright © 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (Orginalversion)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-
-#: standalone/drakfont:520
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Dieses Programm ist freie Software; sie können es weiterverteilen und/oder\n"
-"unter den Bedingungen der GNU General Public License wie von der Free\n"
-"Software Foundation veröffentlicht, entweder Version 2 oder (zu Ihrer "
-"Auswahl)\n"
-"jede spätere Version, verändern.\n"
-"\n"
-"\n"
-" Dieses Programm wird mit dem Gedanken verteilt, dass es nützlich ist,\n"
-" aber OHNE JEDE GARANTIE, sogar ohne die stillschweigende Zusicherung\n"
-" ALLGEMEINER GEBRAUCHSTAUGLICHKEIT oder einer EIGNUNG. Siehe die\n"
-" GNU General Public License für weitere Details.\n"
-"\n"
-"\n"
-" Sie sollten eine Kopie der GNU General Public License zusammen mit diesem\n"
-" Programm erhalten haben. Wenn nicht, schreiben Sie an die Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"Vielen Dank an:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t von Ken Borgendale:\n"
-"\t    Konvertiert Windows-pfm-Dateien in afm-Dateien (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t von James Macnicol: \n"
-"\t    type1inst generiert Dateien, Schriftverzeichnisse, Skalierungen und "
-"die Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t von Andreq Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"          Konvertiert ttf-Schriftdateien in afm- und pfb-Schriften\n"
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Wählen Sie die Programme, die die Schriftarten verwenden sollen:"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Bevor Sie irgendwelche Schriftarten installieren, müssen Sie das Recht "
-"haben, diese zu verwenden und zu installieren.\n"
-"\n"
-"Sie können die Schriftarten auf normalem Weg einbinden. In seltenen "
-"Fällenkönnen defekte Schriftarten den X-Server lahmlegen."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Generische Drucker"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Wählen Sie eine Schriftartdatei bzw. ein Verzeichnis und betätigen Sie "
-"„Hinzufügen“"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Dateiauswahl"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, c-format
-msgid "Import fonts"
-msgstr "Schriftarten importieren"
-
-#: standalone/drakfont:658
-#, c-format
-msgid "Install fonts"
-msgstr "Schriftarten installieren"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "Klicken Sie hier, wenn Sie sicher sind."
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "Hier, falls nicht."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Markierung löschen"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Alle auswählen"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Liste entfernen"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, c-format
-msgid "Importing fonts"
-msgstr "Importiere Schriftarten"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Vortests"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Schriftarten auf Ihren Rechner kopieren"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Schriftarten installieren und konvertieren"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr "Nach der Installation"
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Entfernen von Schriftarten auf Ihrem Rechner"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr "Nach dem Entfernen"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Teilen der Internet-Verbindung"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Entschuldigung, wir unterstützen nur Kernelversion 2.4 und höher."
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Gemeinsame Internet-Verbindung momentan abgeschaltet."
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die Einrichtung einer gemeinsamen Internet-Verbindung wurde bereits "
-"durchgeführt.\n"
-"Momentan ist sie deaktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "aktivieren"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "neu konfigurieren"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "Verwerfen"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Aktiviere Server..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Die Internetverbindungsfreigabe ist nun eingeschaltet."
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Gemeinsame Internetverbindung momentan eingeschaltet."
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine gemeinsame Internet-Verbindung aufgesetzt.\n"
-"Momentan ist sie aktiviert.\n"
-"\n"
-"Was wollen Sie tun?"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "deaktivieren"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Deaktiviere Server ..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Gemeinsame Internet-Verbindung ist nun abgeschaltet."
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sie sind dabei, Ihren Rechner zu konfigurieren, dass er die eingerichtete \n"
-"Internetverbindung mit einem lokalen Netzwerk teilt.\n"
-"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung\n"
-"mit DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
-"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein \n"
-"lokales Netz (LAN) aufsetzen können."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Schnittstelle %s (verwendet Modul %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Schnittstelle: %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Sie haben keine Netzwerkkarte!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Netzwerkkarte"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Sie haben nur eine konfiguriertes Netzwerkgerät an Ihrem Rechner:\n"
-"\n"
-"%s\n"
-"\n"
-"Ich setze ihr lokales Netz damit auf."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Wählen Sie die Netzwerkkarte"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bitte wählen Sie die Netzwerkkarte, die mit Ihrem lokalen Netzwerk \n"
-"verbunden ist."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Ihr Netzwerk ist bereits konfiguriert"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Warnung, das Netzwerkgerät „%s“ ist bereits konfiguriert.\n"
-"\n"
-"Wollen Sie eine automatische Neukonfiguration?\n"
-"\n"
-"Sie können auch eine manuelle Einrichtung vornehmen - dafür sollten Sie "
-"jedoch wissen, wie das funktioniert."
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Automatische Rekonfiguration"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "Nein (nur für Experten)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration anzeigen"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Aktuelle Schnittstellenkonfiguration"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Aktuelle Konfiguration von „%s“:\n"
-"\n"
-"Netzwerk: %s\n"
-"IP-Adresse: %s\n"
-"IP-Eigenschaften: %s\n"
-"Treiber: %s"
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Ich kann Ihre aktuelle Konfiguration beibehalten und annehmen, dass Sie "
-"bereits einen DHCP-Server eingerichtet haben. Stellen Sie in diesem Fall "
-"sicher, dass ich Ihr Klasse-C-Netzwerk korrekt erkannt habe. Ich werde es "
-"weder neu konfigurieren, noch Ihre DHCP-Konfiguration ändern.\n"
-"\n"
-"Ihr standardmäßiger DNS Eintrag ist der Caching-Nameserver Ihrer Firewall. "
-"Sie können diesen etwa durch den DNS-Server Ihres Internetanbieters "
-"ersetzen.\n"
-"\n"
-"Ich kann jedoch auch Ihre Schnittstelle neu konfigurieren und einen DHCP-"
-"Server für Sie aufsetzen.\n"
-"\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Lokale Netzwerkadresse"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"DHCP Server Konfiguration.\n"
-"\n"
-"Hier können Sie verschiedene Optionen für die DHCP Server Konfiguration "
-"wählen.\n"
-"Wenn Sie die Bedeutung einer Option nicht verstehen, lassen Sie sie so wie "
-"sie ist."
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Diese) DHCP-Server-IP"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "Die IP des DNS-Servers"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Der interne Domänen-Name"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "Der DHCP Startbereich"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "DHCP Endbereich"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Standard-IP-Verleihdauer (in Sekunden)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Maximale IP-Verleihdauer (in Sekunden)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Neukonfiguration des Geräts und des DHCP-Servers"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Das lokale Netzwerk endet nicht auf “.0“ - bereinige."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"Es liegt ein möglicher LAN-Adressen-Konflikt in der Konfiguration\n"
-"von %s vor!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Konfiguriere ..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Konfiguriere Skripte, installiere Software, starte Dienste..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme beim Installieren von Paket %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Es wurde alles eingerichtet.\n"
-"Sie können Ihre Internetverbindung nun mit anderen Rechnern in Ihremlokalen "
-"Netz mittels automatischer Netzwerk-Konfiguration (DHCP) und "
-"einemtransparenten Proxy Cache Server (SQUID) teilen."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-" drakhelp 0.1\n"
-"Copyright © 2003-2005 Mandriva.\n"
-"Dies ist freie Software und kann unter der den Bedingungen der GNU GPL "
-"weitergegeben werden.\n"
-"\n"
-"Aufruf: \n"
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr " --help                - diesen Hilfetext anzeigen     \n"
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-" --id <id_label>       - lade die HTML Hilfeseite, die auf id_label "
-"verweist\n"
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-" --doc <Verweis>       - Verweis auf eine andere Internetseite (für den WM-"
-"Begrüßungsschirm)\n"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Mandriva Linux Hilfezentrum"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-"%s kann nicht angezeigt werden\n"
-". Kein Eintrag in der Hilfedatei\n"
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "System Einstellungen"
-
-#: standalone/drakperm:23
-#, c-format
-msgid "Custom settings"
-msgstr "Benutzerdefinierte Einstellungen"
-
-#: standalone/drakperm:24
-#, c-format
-msgid "Custom & system settings"
-msgstr "Benutzerdefinierte & Systemeinstellungen"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "änderbar"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Pfad"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Benutzer"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Gruppe"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Berechtigungen"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr "Aktuelle Regel bearbeiten"
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Hier sind die Dateien aufgelistet um die Berechtigungen, Eigentümer und "
-"Gruppen via msec anzupassen.\n"
-"Es können auch eigene Regeln definiert werden, die die Default Regeln "
-"überschreiben."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-"Die aktuelle Sicherheitsebene ist : %s\n"
-"Wählen Sie die Rechte, die Sie sehen/ändern wollen."
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Hoch"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Markierte Regel eine Ebene höher verschieben"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Runter"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Markierte Regel eine Ebene heruntersetzen"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a rule"
-msgstr "eine Regel hinzufügen"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Neue Regel am Ende hinzufügen"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Markierte Regel entfernen"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Bearbeiten"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "durchsuchen"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "Benutzer"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "Gruppe"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "Andere"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Lesen"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr "Aktiviere „%s“ um die Datei zu lesen"
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Schreiben"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr "„%s“ aktivieren, um die Datei zu schreiben"
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Ausführen"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr "Aktivierung von „%s“, um die Datei auszuführen"
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr "Sticky-bit"
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"Für Verzeichnisse:\n"
-" nur der Besitzer des Verzeichnisses kann es oder enthaltene Dateien löschen."
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Benutzer ID zur Ausführung benutzen"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "GID setzen"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Gruppen-ID zur Ausführung benutzen"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Benutzer :"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Gruppe :"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Aktueller Benutzer"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "wenn markiert, werden Eigentümer und Gruppe nicht geändert"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Pfad-Auswahl"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Eigenschaft"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Konfiguration des PXE-Servers"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Konfiguration des Installations-Servers"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Sie sind dabei, auf Ihrem Rechner einen PXE-Server als DHCP-Server sowie "
-"einen TFTP-Server einzurichten. Damit ermöglichen Sie es anderen Rechnern "
-"Ihres Netzwerks eine Installation von diesem Rechner aus vorzunehmen.\n"
-"\n"
-"Stellen Sie sicher, dass Sie Ihre Netzwerk-/Internetverbindung mit "
-"DrakConnect eingerichtet haben, bevor Sie fortfahren.\n"
-"Anmerkung: Sie benötigen eine Netzwerkkarte, mit deren Hilfe Sie ein lokales "
-"Netz (LAN) aufsetzen können."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Bitte wählen Sie, welches Netzwerkgerät für den DHCP-Server verwendet wird."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Schnittstelle %s (an Netzwerk %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"Der DHCP-Server wird anderen Rechnern die Nutzung von PXE ermöglichen "
-"innerhalb des\n"
-"gegebenen Adressbereichs.\n"
-"Die Netzwerkadresse %s nutzt die Netzmaske %s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "Die erste DHCP-IP"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "Die letzte DHCP-IP"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Stellen Sie sicher, wo die Installationsabbilder erreichbar sind.\n"
-"\n"
-"Wenn Sie kein vorhandenes Verzeichnis haben kopieren Sie bitte\n"
-"den Inhalt von CD oder DVD\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Verzeichnis des Installationsabbildes"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Kein Image gefunden"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Kein CD oder DVD-Image gefunden, bitte kopieren Sie die "
-"Installationprogramme und rpm-Dateien."
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Bitte geben Sie an, wo sich die Datei „auto_install.cfg“ befindet.\n"
-"\n"
-"Lassen Sie das Feld leer, wenn Sie keine automatische Installaton wollen.\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ort der auto_install.cfg-Datei"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr "ESSID"
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Modus"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Kanal"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr "Schlüssel"
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Netzwerk:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Modus:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Verschlüsselung:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr "Signal:"
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr "Roaming"
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr "Roaming: %s"
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "aus"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr "Abfrageintervall (Sek): "
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr "Setzen"
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr "Bekannte Netzwerke (Hoch/Runter ziehen oder bearbeiten)"
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Verbinden"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr "Verfügbare Netzwerke"
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr "Neu einlesen"
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Status"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Verbindung trennen"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Aktualisieren"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "an"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr "Alle"
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr "LOKAL"
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Ignorieren"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-"Hier können Sie die Sicherheitstsebene und den Administrator ihres Computers "
-"festlegen\n"
-"\n"
-"\n"
-"Der „<span weight=\"bold\">Sicherheits Administrator</span>“ ist derjenige, "
-"der Sicherheitswarnungen erhält, wenn die „<span weight=\"bold"
-"\">Sicherheitswarnungen</span>“-Option ausgewählt wurde. Das kann in Form "
-"eines\n"
-"Benutzernamens oder einer Emailadresse festgelegt werden.\n"
-"\n"
-"\n"
-"Das Menü „<span weight=\"bold\">Sicherheitsebene</span>“ gibt Ihnen die Wahl "
-"zwischen sechs vordefinierten Sicherheitsebenen\n"
-"Diese Stufen reichen von „<span weight=\"bold\">schwacher</span>“ Sicherheit "
-"und einfacher Benutzung, bis „<span weight=\"bold\">paranoider</span>“ "
-"Einstellung, passend für sensible Server Anwendungen:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Schwach</span>: Dies ist eine total "
-"unsichere, aber einfach\n"
-"zu nutzende Sicherheitsebene. Sie sollte nur für Rechner verwendet werden, "
-"die nicht mit einem\n"
-"Netzwerk verbunden sind und auf die nicht jeder Zugriff hat.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: Dies ist die Standard "
-"Sicherheitsebene\n"
-"empfohlen für Rechner, die als Client mit dem Internet verbunden\n"
-"sind.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Hoch</span>: Hier gibt es bereits ein paar\n"
-"Einschränkungen, und mehr automatische Überprüfungen laufen jede Nacht.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Höher</span>: Die Sicherheit ist jetzt hoch "
-"genug \n"
-"um das System als Server zu nutzen, der Verbindungen zu vielen Clients "
-"akzeptiert. Wenn\n"
-"Ihr Rechner nur als Client im Internet ist, sollten Sie eine niedrigere "
-"Stufe wählen.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: Diese Einstellung ähnelt "
-"der vorherigen \n"
-"Ebene, aber das System ist vollständig abgeschlossen und die "
-"Sicherheitsregeln\n"
-"sind auf Maximum"
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Beschreibung der Felder:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr " (Voreinstellung: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Sicherheitsebene:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Sicherheitsadministrator (Benutzername oder E-Mail):"
-
-#: standalone/draksec:219
-#, c-format
-msgid "Basic options"
-msgstr "grundlegende Optionen"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Netzwerkoptionen"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Systemoptionen"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Periodische Checks"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Bitte warten, Sicherheitsebene wird eingestellt..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Bitte warten, Sicherheitsoptionen werden eingestellt..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Keine Soundkarte erkannt!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Auf Ihrem System wurde keine Soundkarte gefunden. Bitte stellen Sie sicher, "
-"daß\n"
-"eine Soundkarte korrekt installiert ist und diese Linux unterstützt.\n"
-"\n"
-"\n"
-"Sie können unsere Hardware-Datenbank einsehen unter:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Hinweis: Wenn Sie eine ISA PnP Sound-Karte haben, müssen Sie das Programm "
-"„sndconfig“ oder „alsaconf“ verwenden. Einfach in einer Konsole „sndconfig“ "
-"oder „alsaconf“ eingeben."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"Das Paket ‚ImageMagick‘ wird zur Beendigung der Konfiguration benötigt.\n"
-"Wählen Sie „OK“, um ‚ImageMagick‘ zu installieren oder „Abbrechen“ zum "
-"Beenden."
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"x Koordinaten des Textfeldes\n"
-"in der Zahl der Zeichen"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"Y-Koordinate des Textfeldes\n"
-"in Anzahl-Zeichen"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "Text Breite"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "Höhe des Textfelds"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"Linke obere Ecke des\n"
-"Fortschrittsbalkens"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"y-Koordinate der oberen linken Ecke\n"
-"der Fortschrittsanzeige"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "Die Breite des Fortschrittbalkens"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "Die Höhe des Fortschrittbalkens"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Logo auf Konsole anzeigen"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Design-Name"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "endgültige Auflösung"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "Design speichern"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "Sichere das Bootsplash-Design..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "Image-Datei auswählen"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Farbauswahl für den Fortschrittsbalken"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr "Verbindung über eine serielle Verbindung oder ein USB-Kabel"
-
-#: standalone/drakups:80
-#, c-format
-msgid "Add an UPS device"
-msgstr "Ein USV-Gerät hinzufügen"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Herzlich Willkommen im USV-Einrichtungsassistenten.\n"
-"\n"
-"Hier können Sie ein neues USV-Gerät zu System hinzufügen.\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-"Wir werden nun ein USV-Gerät hinzufügen.\n"
-"\n"
-"Möchten Sie nun angeschlossene USV-Geräte automatisch erkennen lassen?"
-
-#: standalone/drakups:93
-#, c-format
-msgid "Autodetection"
-msgstr "Automatische Erkennung"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Erkennung läuft"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Herzlichen Glückwunsch!"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr "Der Assistent hat die folgenden USV-Geräte erfolgreich eingerichtet:"
-
-#: standalone/drakups:123
-#, c-format
-msgid "No new UPS devices was found"
-msgstr "Keine neuen USV Geräte gefunden."
-
-#: standalone/drakups:128 standalone/drakups:140
-#, c-format
-msgid "UPS driver configuration"
-msgstr "USV-Treiber-Konfiguration"
-
-#: standalone/drakups:128
-#, c-format
-msgid "Please select your UPS model."
-msgstr "Bitte wählen Sie ihr USV-Modell."
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr "Hersteller / Modell:"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-"Wir richten die „%s“-USV von „%s“ ein.\n"
-"Bitte tragen Sie Namen, Treiber und Port ein."
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Name: "
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr "Der Name Ihrer USV"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr "Der Treiber, der Ihre USV verwaltet"
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Port:"
-
-#: standalone/drakups:149
-#, c-format
-msgid "The port on which is connected your ups"
-msgstr "Der Port, an dem Ihr USV-Gerät angeschlossen ist"
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr "Der Assistent hat das USV-Gerät „%s“ erfolgreich konfiguriert."
-
-#: standalone/drakups:250
-#, c-format
-msgid "UPS devices"
-msgstr "USV-Geräte"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Name"
-
-#: standalone/drakups:269
-#, c-format
-msgid "UPS users"
-msgstr "USV-Benutzer"
-
-#: standalone/drakups:285
-#, c-format
-msgid "Access Control Lists"
-msgstr "Zugriffskontrolllisten (ACLs)"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr "IP-Maske"
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Regeln"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Aktion"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Ebene"
-
-#: standalone/drakups:299
-#, c-format
-msgid "ACL name"
-msgstr "ACL-Name"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, c-format
-msgid "DrakUPS"
-msgstr "DrakUSV"
-
-#: standalone/drakups:339
-#, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Willkommen im USV-Konfigurationsprogramm"
-
-#: standalone/drakvpn:73
-#, c-format
-msgid "DrakVPN"
-msgstr "DrakVPN"
-
-#: standalone/drakvpn:95
-#, c-format
-msgid "The VPN connection is enabled."
-msgstr "Die VPN-Verbindung ist aktiviert."
-
-#: standalone/drakvpn:96
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Es wurde bereits eine VPN-Verbindung eingerichtet.\n"
-"\n"
-"Momentan ist sie aktiviert.\n"
-"\n"
-"Was möchten Sie tun?"
-
-#: standalone/drakvpn:105
-#, c-format
-msgid "Disabling VPN..."
-msgstr "Deaktiviere VPN ..."
-
-#: standalone/drakvpn:114
-#, c-format
-msgid "The VPN connection is now disabled."
-msgstr "Die VPN-Verbindung ist nun deaktiviert."
-
-#: standalone/drakvpn:121
-#, c-format
-msgid "VPN connection currently disabled"
-msgstr "Die VPN-Verbindung ist momentan deaktiviert."
-
-#: standalone/drakvpn:122
-#, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die Einrichtung einer VPN-Verbindung wurde bereits durchgeführt.\n"
-"\n"
-"Momentan ist sie deaktiviert.\n"
-"\n"
-"Was möchten Sie tun?"
-
-#: standalone/drakvpn:135
-#, c-format
-msgid "Enabling VPN..."
-msgstr "Aktiviere VPN..."
-
-#: standalone/drakvpn:141
-#, c-format
-msgid "The VPN connection is now enabled."
-msgstr "Die VPN-Verbindung ist nun aktiviert."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr "Einfaches VPN-Setup."
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-"Sie sind dabei, eine VPN-Verbindung auf Ihrem Rechner einzurichten.\n"
-"\n"
-"Mit dieser Funktion können Rechner aus dem privaten, lokalen Netzwerk und "
-"Rechner\n"
-"aus anderen privaten, entfernten Netzwerken auf sichere Weise Resourcen "
-"durch \n"
-"Firewalls und über das Internet hinweg teilen.\n"
-"\n"
-"Die Verbindung über das Internet ist verschlüsselt. Es sieht aus, als ob "
-"sich die lokalen\n"
-"entfernten Rechner in gleichen Netzwerk befänden.\n"
-"\n"
-"Bevor Sie weiter machen stellen Sie sicher, dass Sie Ihren Netzwerk- und "
-"Internet-Zugang\n"
-"mit DrakConnect eingerichtet haben."
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-"VPN-Verbindung.\n"
-"\n"
-"Das Programm basiert auf den folgenden Projekten:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-HowTo: \t\thttp://www.ipsec-howto.org\n"
-" - den Dokumentationen, die mit dem Paket %s kommen\n"
-"\n"
-"Bitte lesen Sie MINDESTENS die ipsec-HowTo-Dokumentation\n"
-"bevor Sie weitermachen."
-
-#: standalone/drakvpn:196
-#, c-format
-msgid "Kernel module."
-msgstr "Kernel-Modul."
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-"Der Kernel muss IPsec-Unterstützung haben.\n"
-"\n"
-"Sie arbeiten mit Kernelversion %s.\n"
-"\n"
-"Dieser Kernel hat „%s“-Unterstützung."
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "Security Policies"
-msgstr "Sicherheitsregeln:"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr "IKE-Daemon racoon"
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, c-format
-msgid "Configuration file"
-msgstr "Konfigurationsdatei"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-"Einrichtungsschritt !\n"
-"\n"
-"Sie müssen Sicherheitsregeln definieren und danach den\n"
-"automatischen Schlüsselaustausch-Dienst (IKE) einrichten.\n"
-"Der KAME-IKE, den wir verwenden heißt „racoon“.\n"
-"\n"
-"Was möchten Sie einrichten?\n"
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-"Als nächstes richten wir die %s-Datei ein.\n"
-"\n"
-"\n"
-"Klicken Sie einfach auf Weiter.\n"
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, c-format
-msgid "%s entries"
-msgstr "%s Einträge"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-"Die %s-Datei-Inhalte\n"
-"sind in Sektionen unterteilt.\n"
-"\n"
-"Sie können nun:\n"
-"\n"
-"  - Sektionen anzeigen, hinzufügen, bearbeiten oder enfernen, dann\n"
-"  - die Änderungen übertragen\n"
-"\n"
-"Was möchten Sie tun?\n"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Darstellen"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Festlegen"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Konfiguration anzeigen"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-"Die %s-Datei existiert nicht.\n"
-"\n"
-"Es handelt sich wohl um eine neue Konfiguration.\n"
-"\n"
-"Sie müssen zurück gehen und „hinzufügen“ wählen.\n"
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr "ipsec.conf-Einträge"
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"Die Datei %s enhält verschiedene Sektionen.\n"
-"\n"
-"Hier ist das Gerüst :\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"Sie können nun eine dieser Sektionen hinzufügen.\n"
-"\n"
-"Wählen Sie die Sektion, die Sie hinzufügen wollen.\n"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "config setup"
-msgstr "Einrichtung konfigurieren"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "conn %default"
-msgstr "conn %default"
-
-#: standalone/drakvpn:376
-#, c-format
-msgid "normal conn"
-msgstr "normale Verbindung"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, c-format
-msgid "Exists!"
-msgstr "Existiert !"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-"Eine Sektion mit diesem Namen existiert bereits.\n"
-"Die Sektionsnamen müssen einzigartig sein.\n"
-"\n"
-"Sie müssen zurück gehen und eine andere Sektion hinzufügen,\n"
-"oder den Namen ändern.\n"
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Diese Sektion muss am Anfang Ihrer\n"
-"%s-Datei stehen.\n"
-"\n"
-"Stellen Sie sicher, dass alle anderen Sektionen dieser\n"
-"Konfigurationssetup-Sektion folgen.\n"
-"\n"
-"Wählen Sie Weiter oder Vorher wenn Sie fertig sind.\n"
-
-#: standalone/drakvpn:405
-#, c-format
-msgid "interfaces"
-msgstr "Schnittstellen"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr "klipsdebug"
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr "plutodebug"
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr "plutoload"
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr "plutostart"
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr "uniqueids"
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-"Dies ist die erste Sektion nach der\n"
-"Konfigurationsetup-Sektion.\n"
-"\n"
-"Hier richten Sie die Standardeinstellungen ein.\n"
-"Alle weiteren Sektionen folgen dieser Sektion.\n"
-"Die verbleibenden Einstellungen sind optional. Wenn\n"
-"Sie sie hier nicht global einrichten können Sie diese\n"
-"in den einzelnen Sektionen einrichten.\n"
-
-#: standalone/drakvpn:451
-#, c-format
-msgid "PFS"
-msgstr "PFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr "keyingtries"
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr "compress"
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr "disablearrivalcheck"
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "left"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr "leftcert"
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr "leftrsasigkey"
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr "leftsubnet"
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr "leftnexthop"
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Ihre %s-Datei hat verschiedene Sektionen, oder Verbindungen.\n"
-"\n"
-"Sie können nun eine neue Sektion hinzufügen.\n"
-"Wählen Sie Weiter, wenn Sie mit der Eingabe fertig sind.\n"
-
-#: standalone/drakvpn:491
-#, c-format
-msgid "section name"
-msgstr "Sektionsname"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr "authby"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "automatisch"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "rechts"
-
-#: standalone/drakvpn:500
-#, c-format
-msgid "rightcert"
-msgstr "rechtes Zertifikat"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr "rightrsasigkey"
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr "rightsubnet"
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr "rightnextthop"
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-"Eine Sektion mit diesem Namen existiert bereits.\n"
-"Sektionsnamen müssen einzigartig sein.\n"
-"\n"
-"Sie müssen zurück gehen und eine andere Sektion\n"
-"hinzufügen, oder den Namen ändern.\n"
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Eine Sicherheitsregeln hinzufügen.\n"
-"\n"
-"Sie können nun eine Sicherheitsregel hinzufügen.\n"
-"\n"
-"Wählen Sie „Weiter“ wenn Sie fertig sind mit der Dateneingabe.\n"
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, c-format
-msgid "Edit section"
-msgstr "Sektion bearbeiten"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-"Ihre %s-Datei hat verschiedene Sektionen oder Verbindungen.\n"
-"\n"
-"Sie können unten wählen, welche Sie bearbeiten wollen.\n"
-"Wählen Sie danach auf weiter.\n"
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, c-format
-msgid "Section names"
-msgstr "Sektionsnamen"
-
-#: standalone/drakvpn:590
-#, c-format
-msgid "Can not edit!"
-msgstr "Bearbeiten nicht möglich!"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-"Sie können diese Sektion nicht bearbeiten.\n"
-"\n"
-"Diese Sektion ist für Freeswan 2.X zwingend erforderlich.\n"
-"Man muss Version 2.0 spezifizieren am Anfang\n"
-"der %s-Datei. Anschließend können Sie zusätzliche\n"
-"Verschlüsselung an- oder abschalten.\n"
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Ihre %s-Datei hat verschiedene Sektionen.\n"
-"\n"
-"Sie können nun die Einträge der Konfigurationssetup-Sektion\n"
-"bearbeiten. Wählen Sie nach der Eingabe weiter.\n"
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Ihre %s-Datei hat verschiedene Sektionen oder Verbindungen.\n"
-"\n"
-"Sie können nun die Standard-Sektionseinträge bearbeiten.\n"
-"Wählen Sie nach der Eingabe weiter.\n"
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Ihre %s-Datei hat verschiedene Sektionen oder Verbindungen.\n"
-"\n"
-"Sie können unten wählen, welche Sie bearbeiten wollen.\n"
-"Wählen Sie danach auf weiter.\n"
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Bearbeiten Sie eine Sicherheitsregel.\n"
-"\n"
-"Sie können nun eine Sicherheitsregel hinzufügen.\n"
-"\n"
-"Wählen Sie nach  der Eingabe weiter.\n"
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, c-format
-msgid "Remove section"
-msgstr "Sektion entfernen"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-"Ihre %s-Datei hat verschiedene Sektionen oder Verbindungen.\n"
-"\n"
-"Sie können unten auswählen, welche Sie entfernen möchten.\n"
-"Wählen Sie danach weiter.\n"
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-"Die racoon.conf Konfiguration.\n"
-"\n"
-"Der Inhalt dieser Datei ist in Abschnitte unterteilt.\n"
-"Sie können jetzt:\n"
-"  - display \t\t (zeigt den Dateiinhalt an)\n"
-"  - add\t\t\t (fügt einen Abschnitt hinzu)\n"
-"  - edit \t\t\t (Parameter eines Abschnittes ändern)\n"
-"  - remove \t\t (einen bestehenden Abschnitt entfernen)\n"
-"  - commit \t\t (die Änderungen in die echte Datei schreiben)"
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-"Die Datei %s existiert nicht\n"
-"\n"
-"Es handelt sich wohl um eine neue Konfiguration.\n"
-"\n"
-"Sie müssen zurück gehen und einrichten wählen.\n"
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr "racoonf.conf-Einträge"
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-"Der „Sektionen hinzufügen“-Schritt.\n"
-"\n"
-"Unten ist das Gerüst der racoon.conf-Datei:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Wählen Sie die Sektion, die Sie hinzufügen wollen.\n"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "Pfad"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "entfernt"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "sainfo"
-msgstr "sainfo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-"Der „Pfad hinzufügen“-Schritt.\n"
-"\n"
-"Die Pfad-Sektion muss am Anfang Ihrer racoon.conf-Datei stehen.\n"
-"\n"
-"Bewegen Sie die Maus auf den Zertifikatseintrag um Onlinehilfe zu erhalten."
-
-#: standalone/drakvpn:746
-#, c-format
-msgid "path type"
-msgstr "Pfad-Typ"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-"path include Pfad: gibt den Pfad zu einer einzufügenden\n"
-"Datei an. Siehe Datei einfügen.\n"
-"\tBeispiel: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key Datei: gibt eine Datei mit im Voraus\n"
-"geteilten Schlüsseln für viele IDs an. Siehe vorverteilte Schlüsseldatei.\n"
-"\tBeispiel: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate Pfad: racoon(8) durchsucht dieses Verzeichnis\n"
-"wenn ein Zertifikat oder eine Zertifikatsanfrage empfangen wird.\n"
-"\tBeispiel: path certificate '/etc/cert' ;\n"
-"\n"
-"Datei einfügen: füge Datei ein\n"
-"andere Konfigurationsdateien können eingefügt werden.\n"
-"\tBeispiel: include \"remote.conf\" ;\n"
-"\n"
-"Vorverteilte Schlüsseldatei: Die vorverteilte Schlüsseldatei definiert ein "
-"Paar\n"
-"von Bezeichnern and dem geteilten Geheimnis, das in der "
-"Authentifizierungsmethode\n"
-"„vorverteilte Schlüssel“ in Phase 1 verwendet wird."
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, c-format
-msgid "real file"
-msgstr "echte Datei"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Stellen Sie sicher, dass Sie die Pfad-Sektion bereits\n"
-"am Anfang Ihrer racoon.conf-Datei stehen haben.\n"
-"\n"
-"Sie können nun die Fern-Einstellungen machen.\n"
-"Wählen Sie weiter oder vorher wenn Sie fertig sind.\n"
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Stellen Sie sicher, dass Sie die Pfad-Sektion bereits\n"
-"am Anfang Ihrer %s-Datei stehen haben.\n"
-"\n"
-"Sie können nun die sainfo-Einstellungen machen.\n"
-"Wählen Sie weiter oder vorher wenn Sie fertig sind.\n"
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-"Ihre %s-Datei hat verschiedene Sektionen oder Verbindungen.\n"
-"\n"
-"Sie können in der Liste unten wählen, was Sie bearbeiten\n"
-"möchten. Wählen Sie danach weiter.\n"
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-"Ihre %s Datei hat verschiedene Sektionen.\n"
-"\n"
-"\n"
-"Sie können nun die Fern-Einstellungen bearbeiten.\n"
-"\n"
-"Wählen Sie weiter, nach dem Sie fertig sind.\n"
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-"Ihre %s Datei hat verschiedene Sektionen.\n"
-"\n"
-"Sie können nun die sainfo-Sektionseinträge bearbeiten.\n"
-"\n"
-"Wählen Sie weiter, nach dem Sie fertig sind."
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-"Diese Sektion muss am Anfang Ihrer\n"
-"%s-Datei stehen.\n"
-"\n"
-"Stellen Sie sicher, dass alle anderen Sektionen hinter den\n"
-"Pfad-Sektionen folgen.\n"
-"\n"
-"Sie können nun die Pfad-Einträge bearbeiten.\n"
-"\n"
-"Wählen Sie weiter oder vorher wenn Sie fertig sind.\n"
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr "Pfad-Type"
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-"Alles ist eingerichtet.\n"
-"\n"
-"Sie können nun auf sichere Weise Resourcen über das\n"
-"Internet teilen durch die VPN-Nutzung.\n"
-"\n"
-"Sie sollten sicherstellen, dass die Tunnel-Shorewall-\n"
-"Sektion eingerichtet wurde."
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr "Sainfo Quell-Adresse"
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-"sainfo (Quell-ID Ziel-ID | anonymous) { Anweisungen }\n"
-"definiert die parameter der IKE-Phase 2 (IPsec-SA Aufbau).\n"
-"\n"
-"Quell-ID und Ziel-ID werden folgendermaßen zusammengesetzt:\n"
-"\n"
-"\tAdresse Adresse [/ Präfix] [[Port]] Protokoll\n"
-"\n"
-"Beispiele: \n"
-"\n"
-"sainfo anonymous (akzeptiert Verbindungen von überall)\n"
-"\tlassen Sie diesen Eintrag frei, wenn Sie anonymous wollen\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 ist die Quelladresse\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 ist die Quelladresse"
-
-#: standalone/drakvpn:941
-#, c-format
-msgid "Sainfo source protocol"
-msgstr "Sainfo Quellprotokoll"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-"sainfo (Quell-ID Ziel-ID | anonymous) { Anweisungen }\n"
-"definiert die parameter der IKE-Phase 2 (IPsec-SA Aufbau).\n"
-"\n"
-"Quell-ID und Ziel-ID werden folgendermaßen zusammengesetzt:\n"
-"\n"
-"\tAdresse Adresse [/ Präfix] [[Port]] Protokoll\n"
-"\n"
-"Beispiele: \n"
-"\n"
-"sainfo anonymous (akzeptiert Verbindungen von überall)\n"
-"\tlassen Sie diesen Eintrag frei, wenn Sie anonymous wollen\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tdas erste „any“ erlaubt jedes Protokoll für die Quelle"
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr "Sainfo Ziel-Adresse"
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-"sainfo (Quell-ID Ziel-ID | anonymous) { Anweisungen }\n"
-"definiert die parameter der IKE-Phase 2 (IPsec-SA Aufbau).\n"
-"\n"
-"Quell-ID und Ziel-ID werden folgendermaßen zusammengesetzt:\n"
-"\n"
-"\tAdresse Adresse [/ Präfix] [[Port]] Protokoll\n"
-"\n"
-"Beispiele: \n"
-"\n"
-"sainfo anonymous (akzeptiert Verbindungen von überall)\n"
-"\tlassen Sie diesen Eintrag frei, wenn Sie anonymous wollen\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 ist die Zieladresse\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 ist die Zieladresse"
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr "Sainfo Zielprotokoll"
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-"sainfo (Quell-ID Ziel-ID | anonymous) { Anweisungen }\n"
-"definiert die parameter der IKE-Phase 2 (IPsec-SA Aufbau).\n"
-"\n"
-"Quell-ID und Ziel-ID werden folgendermaßen zusammengesetzt:\n"
-"\n"
-"\tAdresse Adresse [/ Präfix] [[Port]] Protokoll\n"
-"\n"
-"Beispiele: \n"
-"\n"
-"sainfo anonymous (akzeptiert Verbindungen von überall)\n"
-"\tlassen Sie diesen Eintrag frei, wenn Sie anonymous wollen\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 ist die Zieladresse\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tdas letzte „any“ erlaubt jedes Protokoll für das Ziel"
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr "PFS-Gruppe"
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-"Definieren Sie die Gruppe der Diffie-Hellman-Exponentiationen.\n"
-"Falls Sie PFS nicht benötigen können Sie die diese Direktive\n"
-"vernachlässigen. Jeder Vorschlag wird akzeptiert wenn Sie keinen\n"
-"angeben. Gruppe ist eine der folgenden: modp768, modp1024 \n"
-"oder modp1536. - Oder Sie können 1,2 oder 5 als DH-Gruppen-\n"
-"Nummer definieren."
-
-#: standalone/drakvpn:996
-#, c-format
-msgid "Lifetime number"
-msgstr "Lebensdauer-Nummer"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-"Definieren Sie eine Lebensdauer für eine bestimmte Zeit,\n"
-"die als Phase-1-Übertragung vorgeschlagen wird.\n"
-"Jeder Vorschlag wird akzeptiert. Die Attribute werden dem\n"
-"Peer nicht vorgeschlagen falls Sie sie nicht angeben. Sie\n"
-"können in jedem Antrag individuell spezifiziert werden.\n"
-"\n"
-"Beispiele : \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"Hier sind die Lebensdauer-Nummern 1, 1, 30, 30, 60 und 12.\n"
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr "Lebensdauer-Einheit"
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-"Definieren Sie eine Lebensdauer für eine bestimmte Zeit,\n"
-"die als Phase-1-Übertragung vorgeschlagen wird.\n"
-"Jeder Vorschlag wird akzeptiert. Die Attribute werden dem\n"
-"Peer nicht vorgeschlagen falls Sie sie nicht angeben. Sie\n"
-"können in jedem Antrag individuell spezifiziert werden.\n"
-"\n"
-"Beispiele : \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"Hier sind die Lebensdauer-Einheiten „min“, „min“, „sec“, „sec“, „sec“ und "
-"„hour“.\n"
-
-#: standalone/drakvpn:1033
-#, c-format
-msgid "Authentication algorithm"
-msgstr "Authentifizierungsalgorythmus"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr "Compressionsalgorythmus"
-
-#: standalone/drakvpn:1036
-#, c-format
-msgid "deflate"
-msgstr "senken"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Entfernt"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-"remote (Adresse | anonymous) [[Port]] { Anweisungen }\n"
-"gibt die Parameter für IKE Phase 1 für jeden entfernten Knoten an.\n"
-"Der Standardport ist 500. Wenn „anonymous“ angegeben ist, werden\n"
-"die Anweisungen auf alle Gegenstellen angewendet, die auf keine\n"
-"anderen entfernte Richtlinie passen.\n"
-"\n"
-"Beispiele: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-
-#: standalone/drakvpn:1052
-#, c-format
-msgid "Exchange mode"
-msgstr "Austauschmodus"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-"Definiert den Austausch für Phase 1, wenn racoon der\n"
-"Initiator ist. Dies bedeutet ebenfalls den akzeptierten Aus-\n"
-"tausch-Modus, wenn racoon antwortet. Mehr als ein Modus\n"
-"kann angegeben werden, indem diese mit Kommata von-\n"
-"einander getrennt werden. Alle Modi werden dann akzeptiert.\n"
-"Der erste Austausch-Modus ist der, welcher von racoon\n"
-"verwendet wird wenn racoon als Initiator fungiert.\n"
-
-#: standalone/drakvpn:1060
-#, c-format
-msgid "Generate policy"
-msgstr "Regel erstellen"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-"Diese Regel ist für den Antwortenden. Sie sollten\n"
-"„passiv“ einschalten, wenn racoon(8) nur als\n"
-"Antwortender benutzt wird.  Wenn der Antwortende keine\n"
-"Regel in der SPD während der Phase-2-Verbindung hat\n"
-"und die Regel ist eingeschaltet, dann wird racoon(8) den ersten\n"
-"Antrag in der SA payload des Initiators auswählen.\n"
-"Racoon erzeugt Regeleinträge aus dem Antrag. Dies ist\n"
-"sinnvoll, um sich mit Clients zu verbinden, die dynamisch\n"
-"IP-Adressen zugewiesen bekommen. Beachten Sie, dass\n"
-"unsachgemäße Regeln vom Initiator in den SPD des Antwortenden\n"
-"installiert werden können. Die Kommunikation könnte fehl-schlagen falls "
-"solche Regeln installiert werden aufgrund von\n"
-"unübereinstimmenden Regeln zwischen Initiator und dem\n"
-"Antwortenden. Diese Regel wird im Falle des Initiators ignoriert.\n"
-"Die Standard-Einstellung ist aus."
-
-#: standalone/drakvpn:1076
-#, c-format
-msgid "Passive"
-msgstr "passiv"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-"Falls Sie die Verbindung nicht initiieren wollen schalten\n"
-"Sie dies an. Der Standardwert ist aus. - Dies ist sinnvoll\n"
-"für einen Server."
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr "Zertifikatstyp"
-
-#: standalone/drakvpn:1083
-#, c-format
-msgid "My certfile"
-msgstr "Meine Zertifizierungsdatei"
-
-#: standalone/drakvpn:1084
-#, c-format
-msgid "Name of the certificate"
-msgstr "Name des Zertifikats"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr "Mein persönlicher Schlüssel"
-
-#: standalone/drakvpn:1086
-#, c-format
-msgid "Name of the private key"
-msgstr "Name des privaten Schlüssels"
-
-#: standalone/drakvpn:1087
-#, c-format
-msgid "Peers certfile"
-msgstr "Peer-Zertifikatsdatei"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr "Name des Peer-Zertifikats"
-
-#: standalone/drakvpn:1089
-#, c-format
-msgid "Verify cert"
-msgstr "Zertifikat bestätigen"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-"Falls Sie das Peer-Zertifikat nicht bestätigen wollen\n"
-"aus irgendeinem Grund, schalten Sie dies ab. \n"
-"Standard ist ein."
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr "Meine Identifizierung"
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-"gibt den Bezeichner an, der zum entfernten Rechner gesendet\n"
-"wird und den Typ, der in der Aushandlungsphase 1 verwendet\n"
-"werden soll. address, FQDN, user_fqdn, keyid und asn1dn können\n"
-"als idtype verwendet werden:\n"
-"So werden sie verwendet:\n"
-"\tmy_identifier address [address];\n"
-"\t\tder Typ ist die IP-Adresse. Das ist der Standardtyp, wenn Sie\n"
-"\t\tkeinen Bezeichner angeben, der verwendet werden soll.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tder Typ ist ein USER_FQDN (User Fully-Qualified\n"
-"\t\tDomain Name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tder Typ ist ein FQDN (Fully-Qualified Domain Name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tder Typ ist eine KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tder Typ ist ein ASN.1 Distinguished Name. Wenn\n"
-"\t\t\"string\" ausgelassen wird, holt racoon(8) sich den DN vom\n"
-"\t\t\"Subject\"-Feld im Zertifikat holen.\n"
-"\n"
-"Beispiele: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-
-#: standalone/drakvpn:1114
-#, c-format
-msgid "Peers identifier"
-msgstr "Peer-Identifizierung"
-
-#: standalone/drakvpn:1115
-#, c-format
-msgid "Proposal"
-msgstr "Antrag"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-"Geben Sie den Verschlüsselungsalgorythmus für die\n"
-"Phase-1-Verbindung an. Diese Regel muss definiert sein.\n"
-"Algorythmus kann eines der folgenden sein:\n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"Für andere Transformationen sollte dies nicht genutzt werden."
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr "Hash-Algorythmus"
-
-#: standalone/drakvpn:1126
-#, c-format
-msgid "DH group"
-msgstr "DH-Gruppe"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Befehl"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr "Quell-IP-Bereich"
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr "Ziel-IP-Bereich"
-
-#: standalone/drakvpn:1136
-#, c-format
-msgid "Upper-layer protocol"
-msgstr "Oberschicht-Protokoll"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, c-format
-msgid "any"
-msgstr "jeder"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Flagge"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Richtung"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr "IPsec-Regel"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "ipsec"
-msgstr "IPsec"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "discard"
-msgstr "löschen"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "tunnel"
-msgstr "Tunnel"
-
-#: standalone/drakvpn:1143
-#, c-format
-msgid "transport"
-msgstr "Transport"
-
-#: standalone/drakvpn:1145
-#, c-format
-msgid "Source/destination"
-msgstr "Quelle / Ziel"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr "benötigen"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr " Standard "
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "use"
-msgstr "benutzen"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "unique"
-msgstr "einzig"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (terrestrisch)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "USA (Kabel)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr "USA (Kabel-hrc)"
-
-# ../../standalone/drakxtv_.c:37C'
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (Kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Japan (terrestrisch)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Japan (Kabel)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "China (terrestrisch)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Westeuropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Osteuropa"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Frankreich (SECAM)"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Neuseeland"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australisches Optus Kabel TV"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"Bitte,\n"
-"geben Sie Fernsehnorm und Staat ein"
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr "Fernsehnorm:"
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Region:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Sendersuche ..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "Sendersuche..."
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Bei der Suche der TV-Kanäle trat ein Fehler auf"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Schönen Tag noch!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Sie können nun (unter X-Windows) „xawtv“ starten.\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Keine TV-Karte gefunden!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Auf Ihrem System wurde keine TV-Karte gefunden. Bitte stellen Sie sicher, "
-"daß\n"
-"eine Video/TV-Karte korrekt installiert ist und diese Linux unterstützt.\n"
-"\n"
-"\n"
-"Sie können unsere Hardware-Datenbank einsehen unter:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Alternative Treiber"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "Liste alternativer Soundtreiber für diese Soundkarte"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"der physikalische Bus, an dem sich das Gerät befindet (etwa: PCI, USB, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Bus"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-"- PCI- und USB-Geräte: Eine Auflistung der IDs der Hersteller, Geräte, "
-"Subhersteller und Subgeräte von PCI- / USB-Geräten."
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- PCI Geräte: PCI-Slot, Gerät und Gerätetyp\n"
-"- EIDE Geräte: Master- oder Slave-Gerät\n"
-"- SCSI Geräte: Der SCSI-Bus und die Geräte-ID"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr "Laufwerkskapazität"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-"spezielle Fähigkeiten des Treibers (Brennfähigkeit oder DVD-Unterstützung)"
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr "Dieses Feld beschreibt das Gerät"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Alte Gerätedatei"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "Alter statischer Name im „dev“ Paket"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Neues DevFS-Gerät"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "Neuer vom DevFS des Kernels vergebener dynamischer Gerätename"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Modul"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
-"Das Linux Kernel-Modul, das Unterstützung für dieses Gerät bereitstellt"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "Extended partitions"
-msgstr "Erweiterte Partitionen"
-
-#: standalone/harddrake2:46
-#, c-format
-msgid "the number of extended partitions"
-msgstr "die Anzahl der erweiterten Partitionen"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Geometrie"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr "Zylinder/Köpfe/Sektoren Geometrie der Platte"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "Disk controller"
-msgstr "Festplattensteuerung"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr "die Festplattensteuerung auf Hostseite"
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "Hardwareklasse"
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Modell"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "Festplattenmodell"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "Port des Netzwerkdruckers"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "Primary partitions"
-msgstr "Primäre Partitionen"
-
-#: standalone/harddrake2:52
-#, c-format
-msgid "the number of the primary partitions"
-msgstr "die Anzahl der primären Partitionen"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "Herstellername des Geräts"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr "Bus PCI #"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "der PCI-Bus, an dem das Gerät angesteckt ist"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device #"
-msgstr "PCI-Gerät #"
-
-#: standalone/harddrake2:55
-#, c-format
-msgid "PCI device number"
-msgstr "PCI-Gerätenummer"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr "PCI Funktion #"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function number"
-msgstr "PCI Funktionsnummer"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "Vendor ID"
-msgstr "Hersteller ID"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr "das ist das numerische Standardkennzeichen des Herstellers"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "Device ID"
-msgstr "Geräte-ID"
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "das ist das numerische Kennzeichen des Gerätes"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr "Unterhersteller-ID"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr "das ist das numerische Unterkennzeichen des Herstellers"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "Sub device ID"
-msgstr "Geräte-Unter-ID"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "das ist das numerische Unterkennzeichen des Gerätes"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid "Device USB ID"
-msgstr "USB-Geräte-ID"
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-"Der GNU/Linux-Kernel muss beim Starten des Rechner eine Berechnungs-schleife "
-"machen, um einen Zähler zu initialisieren. Dessen Ergebnis wirdals Bogomips "
-"gespeichert als Möglichkeit, die CPU zu „benchmarken“."
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "Cachegröße"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "Größe des (Second Level) Prozessor-Caches."
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Coma-Fehler"
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Angabe, ob der Prozessor den Cyrix 6x86 Coma-Fehler aufweist."
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "CPUID-Familie"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "CPU-Familie (z.B.:6 steht für i686)."
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "CPUID-Ebene"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "Informationsgehalt, der durch den Befehl CPUID erhalten werden kann."
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Frequenz (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-"Die CPU-Frequenz in MHz (Megahertz), sie gibt eine erste Näherung für die "
-"Anzahl der Befehle, die der Prozessor pro Sekunde ausführen kann."
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Flaggen"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flags, die vom Kernel gemeldet werden"
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv Fehler"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-"Die ersten Intel Pentium Chips haben eine Fehler in ihrem "
-"Fließkommaprozessor, der nicht die gewünschte Genauigkeit bei Divisionen "
-"(FDIV) erreicht"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "Ist FPU vorhanden"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-"Ja bedeutet, dass der Prozessor einen mathematischen Coprozessor besitzt."
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Ob die FPU einen IRQ Vector hat"
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-"Ja bedeutet, dass der mathematische Coprozessor einen Ausnahmevektor besitzt."
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "F00f: Fehler"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-"frühe Pentium waren fehleranfällig und stürzten beim dekodieren des F00F "
-"Bytecodes ab"
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr "Herunterfahren-Fehler"
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-"Einige der früheren i486DX-100 Chips wechseln nicht verlässlich in "
-"Betriebsmodus nachdem der „halt“ Befehl benutz wurde."
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr "Untertyp der CPU"
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "CPU-Familie (8 steht etwa für Pentium III,...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Modellname"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr "Offizieller Herstellername der CPU"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "Name der CPU"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "Prozessor ID"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "die Nummer des Prozessors"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Modell-Stepping"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr "Stepping der CPU (Submodell (Generations)-Nummer)"
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "Herstellername des Prozessors"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid "Write protection"
-msgstr "Schreibschutz"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-"der WP-Schalter im CR0-Register des Prozessors erzwingt Schreibschutz auf "
-"Speicherseitenebene und ermöglicht so dem Prozessor ungeprüften "
-"Kernelzugriff auf Nutzerspeicher zu verhindern (soll heißen, das ist ein "
-"Fehlerschutz)"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Diskettenformat"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr "Disketten Formate, die durch das Laufwerk unterstützt werden"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI-Kanal"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "Disk identifier"
-msgstr "Festplattenbezeichnung"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr "üblicherweise die Seriennummer der Festplatte"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid "Logical unit number"
-msgstr "Logische Einheitennummer"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-"die SCSI Zielnummer (LUN). SCSI Geräte an einem Rechner werden eindeutig "
-"durch eine Kanalnummer identifiziert, eine Zielnummer und einer logischen "
-"Einheitennummer"
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size"
-msgstr "Installierte Größe"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr "Installierte Größe des Speichermoduls"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled Size"
-msgstr "Aktivierte Größe"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr "Aktivierte Größe des Speichermoduls"
-
-#: standalone/harddrake2:107
-#, c-format
-msgid "type of the memory device"
-msgstr "Typ des Speichergerätes"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Geschwindigkeit"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr "Geschwindigkeit des Speichermoduls"
-
-#: standalone/harddrake2:109
-#, c-format
-msgid "Bank connections"
-msgstr "Modulverbindungen"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr "Sockelbezeichnung des Speichermoduls"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid "Device file"
-msgstr "Gerätedatei"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-"die Gerätedatei wird verwendet, um mit dem Kerneltreiber für die Maus zu "
-"kommunizieren"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr "Emuliertes Rad"
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "ob das Rad emuliert ist oder nicht"
-
-#: standalone/harddrake2:116
-#, c-format
-msgid "the type of the mouse"
-msgstr "der Maustyp"
-
-#: standalone/harddrake2:117
-#, c-format
-msgid "the name of the mouse"
-msgstr "der Mausname"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Anzahl Tasten"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "Anzahl der Maustasten"
-
-#: standalone/harddrake2:119
-#, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "der Typ des Busses, an dem die Maus angeschlossen ist"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr "Mausprotokoll verwendet durch X11"
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr "das Protokoll, das der grafische Desktop mit der Maus verwendet"
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Identifikation"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Verbindung"
-
-#: standalone/harddrake2:137
-#, c-format
-msgid "Performances"
-msgstr "Leistungen"
-
-#: standalone/harddrake2:138
-#, c-format
-msgid "Bugs"
-msgstr "Fehler"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr "FPU"
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Partitionen"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Funktionen"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Optionen"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Hilfe"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/_Drucker automatisch erkennen"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/_Modems automatisch erkennen"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/_Jaz-Laufwerke automatisch erkennen"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr "/Parallele _Zip-Laufwerke automatisch erkennen"
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr "/_Hardwareliste hochladen"
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Beenden"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Felderbeschreibung"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "HardDrake Hilfe"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Wenn Sie ein Gerät auswählen, werden im rechten Rahmen die Geräte-"
-"Informationen angezeigt („Informationen“)."
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Fehler melden"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Über ..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Über HardDrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Das ist HardDrake, ein %s Hardware-Konfigurationswerkzeug.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Autor:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, c-format
-msgid "Harddrake2"
-msgstr "Harddrake2"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Gefundene Hardware"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Modul konfigurieren"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Konfigurationswerkzeug starten"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "Unbekannt"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Unbekannt"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Sonstiges"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"Klicken Sie auf ein Gerät in der linken Leiste, um die entsprechende "
-"Information anzuzeigen"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "sekundär"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "primär"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "burner"
-msgstr "Brenner"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr "Hardwareliste hochladen"
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Zugang:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Passwort:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Rechnername:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Bitte wählen Sie Ihren Tastaturtyp."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Wollen Sie, dass die Rücktaste auf den Konsolen Entfernen sendet?"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-"Die Einstellungen wurden vorgenommen, werden jedoch erst nach einer "
-"Neuanmeldung wirksam"
-
-#: standalone/logdrake:50
-#, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Mandriva Linux Werkzeugprotokolle"
-
-#: standalone/logdrake:51
-#, c-format
-msgid "Logdrake"
-msgstr "LogDrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Nur für diesen Tag zeigen"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Datei/_Neu"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Datei/_Öffnen"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Datei/_Speichern"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Datei/Speichern _unter ..."
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Datei/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Optionen/Test"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Hilfe/_Über ..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr "Authentifizierung"
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr "Benutzer"
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr "Meldungen"
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr "Systemprotokoll"
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "Suche"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Ein Werkzeug zum Überwachen Ihrer Logbücher"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Einstellungen"
-
-#: standalone/logdrake:134
-#, c-format
-msgid "Matching"
-msgstr "Übereinstimmung mit"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "keine Übereinstimmung mit"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Datei wählen"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Kalender"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Inhalt der Logbücher"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "E-Mail-Benachrichtigung"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr "Der Benachrichtungsassistent ist unerwartet fehlgeschlagen:"
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "Einen Moment, ich durchsuche: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache Web-Server"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr "DNS"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "FTP-Server"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix E-Mail-Server"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Samba-Server"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Webmin-Dienst"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd-Dienst"
-
-#: standalone/logdrake:395
-#, c-format
-msgid "Configure the mail alert system"
-msgstr "Stellen die das E-Mail-Benachrichtigungssystem ein"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr "Mailbenachrichtungssystem beenden"
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Mail-Benachrichtigungskonfiguration"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Herzlich willkommen zum E-Mail-Benachrichtigungsassistenten.\n"
-"\n"
-"Hier können Sie Ihr Benachrichtigungssystem einrichten.\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Wo wollen Sie machen?"
-
-#: standalone/logdrake:414
-#, c-format
-msgid "Services settings"
-msgstr "Dienste-Einstellungen"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Sie werden benachrichtigt, falls einer der gewählten Dienste nicht mehr läuft"
-
-#: standalone/logdrake:422
-#, c-format
-msgid "Load setting"
-msgstr "Einstellungen laden"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Sie erhalten eine Nachricht, wenn die Load über diesen Wert steigt"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr "Systemauslastung"
-
-#: standalone/logdrake:429
-#, c-format
-msgid "Alert configuration"
-msgstr "Benachrichtigungskonfiguration"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Bitte geben Sie Ihre E-Mail-Adresse ein"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-"und geben Sie den Namen (oder die IP) des SMTP-Servers ein, den Sie "
-"verwenden wollen"
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr "Der Assistent hat den Email Alarm erfolgreich konfiguriert."
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr "Der Assistent hat den Email Alarm erfolgreich ausgeschalten."
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Speichern unter..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Bitte wählen Sie Ihren Maustyp."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Die dritte Maustaste emulieren?"
-
-#: standalone/mousedrake:61
-#, c-format
-msgid "Mouse test"
-msgstr "Maus Test"
-
-#: standalone/mousedrake:64
-#, c-format
-msgid "Please test your mouse:"
-msgstr "Bitte testen Sie Ihre Maus"
-
-#: standalone/net_applet:45
-#, c-format
-msgid "Network is up on interface %s"
-msgstr "Netzwerk läuft auf Schnittstelle %s"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr ""
-"Das Netzwerk an Schnitstelle %s ist getrennt. Klicken Sie auf  „Netzwerk "
-"einrichten“"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Verbinde %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Trenne %s"
-
-#: standalone/net_applet:70
-#, c-format
-msgid "Monitor Network"
-msgstr "Netzwerk überwachen"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Netzwerk konfigurieren"
-
-#: standalone/net_applet:73
-#, c-format
-msgid "Watched interface"
-msgstr "Überwachte Schnittstelle"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Profile"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr "Onlinehilfe erhalten"
-
-#: standalone/net_applet:223
-#, c-format
-msgid "Interactive intrusion detection"
-msgstr "Interaktive Einbruchserkennung"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Immer bei Systemstart starten"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr "Ein Portscan-Angriff wurde durch %s versucht."
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "Der %s Dienst wurde durch %s angegriffen."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr "Ein Passwort-Angriff wurde durch %s versucht."
-
-#: standalone/net_applet:290
-#, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Aktive Firewall: Einbruch erkannt"
-
-#: standalone/net_applet:301
-#, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Wollen Sie den Angreifer auf die schwarze Liste setzen?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr "Immer auf die schwarze Liste setzen (nicht nochmal fragen)"
-
-#: standalone/net_applet:318
-#, c-format
-msgid "Attack details"
-msgstr "Angriffsdetails"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr "Angriffszeit: %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Netzwerk-Schnittstelle: %s"
-
-#: standalone/net_applet:324
-#, c-format
-msgid "Attack type: %s"
-msgstr "Angriffstyp: %s"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protokoll: %s"
-
-#: standalone/net_applet:326
-#, c-format
-msgid "Attacker IP address: %s"
-msgstr "IP-Adresse des Angreifers: %s"
-
-#: standalone/net_applet:327
-#, c-format
-msgid "Attacker hostname: %s"
-msgstr "Rechnername des Angreifers: %s"
-
-#: standalone/net_applet:328
-#, c-format
-msgid "Service attacked: %s"
-msgstr "angegriffener Dienst: %s"
-
-#: standalone/net_applet:329
-#, c-format
-msgid "Port attacked: %s"
-msgstr "angegriffener Port: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr "Typ des ICMP-Angriffs: %s"
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Netzwerküberwachung"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr "Globale Statistiken"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr "Momentan"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Durchschnitt"
-
-#: standalone/net_monitor:108
-#, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr ""
-"Sendegesch-\n"
-"windigkeit:"
-
-#: standalone/net_monitor:109
-#, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr ""
-"Enpfangsgesch-\n"
-"windigkeit:"
-
-#: standalone/net_monitor:113
-#, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr ""
-"Verbindungs-\n"
-"Zeit: "
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr "Die gleiche Skala für Empfangen und Senden verwenden"
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Bitte warten, Test Ihrer Verbindung..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Disconnecting from Internet "
-msgstr "Vom Internet trennen"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, c-format
-msgid "Connecting to Internet "
-msgstr "Mit dem Internet verbinden"
-
-#: standalone/net_monitor:232
-#, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Die Trennung vom Internet schlug fehl!"
-
-#: standalone/net_monitor:233
-#, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Trennung vom Internet erfolgreich."
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Verbindung fertiggestellt."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Verbinden fehlgeschlagen.\n"
-"Überprüfen Sie Ihre Konfiguration im Mandriva Linux Kontrollzentrum."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Farbkonfiguration"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "Gesendet: "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "Empfangen: "
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "Durchschnitt"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Lokale Messung"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"WARNUNG: Es wurde bereits eine Internetverbindung gefunden. Vielleicht nutzt "
-"diese ihr Netzwerk."
-
-#: standalone/net_monitor:478
-#, c-format
-msgid "No internet connection configured"
-msgstr "Keine Internetverbindung konfiguriert"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Lese Daten der installierten Drucker ..."
-
-#: standalone/printerdrake:116
-#, c-format
-msgid "%s Printer Management Tool"
-msgstr "%s Drucker Verwaltung"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/Be_arbeiten"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Drucker hinzufügen"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Als Stan_dard setzen"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Ändern"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Löschen"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/-Expertenmodus"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Aktualisieren"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_CUPS konfigurieren"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Suche:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Filter anwenden"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr "Def."
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Druckername"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Verbindungstyp:"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Server Name"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add Printer"
-msgstr "Drucker hinzufügen"
-
-#: standalone/printerdrake:226
-#, c-format
-msgid "Add a new printer to the system"
-msgstr "Neuen Drucker hinzufügen"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Als Standard setzen"
-
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Als Standarddrucker verwenden"
-
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit selected printer"
-msgstr "Änderung des markierten Druckers"
-
-#: standalone/printerdrake:235
-#, c-format
-msgid "Delete selected printer"
-msgstr "Ausgewählte Drucker entfernen"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Liste aktualisieren"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS"
-msgstr "CUPS konfigurieren"
-
-#: standalone/printerdrake:241
-#, c-format
-msgid "Configure CUPS printing system"
-msgstr "Das CUPS Drucker System konfigurieren"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Aktiviert"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Deaktiviert"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Autoren: "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, c-format
-msgid "Printer Management %s"
-msgstr "Druckerverwaltung %s"
-
-#: standalone/scannerdrake:51
-#, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr ""
-"Sane Pakete müssen installiert sein um Scanner nutzen zu können.\n"
-"\n"
-"Wollen Sie die SANE Pakete installieren?"
-
-#: standalone/scannerdrake:55
-#, c-format
-msgid "Aborting Scannerdrake."
-msgstr "ScannerDrake abbrechen"
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-"Konnte die notwendigen Programmpakete zum Einrichten eines Scanners mit "
-"Scannerdrake nicht installieren."
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr "Scannerdrake wird jetzt nicht gestartet."
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Suche nach eingerichteten Scannern ..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Suche nach neuen Scannern ..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "Erneuere die Liste der konfigurierten Scanner..."
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "Der %s wird von dieser Version %s NICHT unterstützt."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s an %s gefunden. Wollen Sie eine automatische Einrichtung?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"%s ist nicht in der Scanner-Datenbank vorhanden. Wollen Sie ihn manuell "
-"einrichten?"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Wählen Sie einen Scanner"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Gefundendenes Modell: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Port: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr " (NICHT UNTERSTÜTZT)"
-
-#: standalone/scannerdrake:144
-#, c-format
-msgid "The %s is not supported under Linux."
-msgstr "Der %s wird nicht von Linux unterstützt"
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr "Keine Firmware Datei installieren"
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-"Es ist möglich, dass der %s jedesmal die Firmware laden muss, wenn er "
-"angeschaltet wird."
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr "Wenn das der Fall ist, kann das auch automatisch erledigt werden."
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-"Es muss deshalb die Firmware Datei für den Scanner bereitgestellt werden."
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-"Sie finden die Datei auf der CD oder Diskette, die Sie zusammen mit Ihrem "
-"Scanner bekommen haben, auf der Webseite des Herstellers oder auf Ihrer "
-"Windows Partition"
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr "Installiere Firmware Datei von"
-
-#: standalone/scannerdrake:200
-#, c-format
-msgid "Select firmware file"
-msgstr "Firmware-Datei auswählen"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr "Die Firmware Date %s existiert nicht oder ist unlesbar!"
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-"Es ist möglich, dass die Firmware des Scanners bei jedem Einschalten geladen "
-"werden muss."
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-"Sie müssen die Firmware-Dateien des Scanners vorrätig haben, um sie "
-"installieren zu können."
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-"Wenn Sie die Scanner-Firmware schon installiert haben, können Sie die "
-"Firmware hier updaten. Sie müssen die Firmware-Datei vorrätig haben."
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr "Installiere Firmware für den"
-
-#: standalone/scannerdrake:258
-#, c-format
-msgid "Select firmware file for the %s"
-msgstr "Firmware Datei auswählen für den %s"
-
-#: standalone/scannerdrake:276
-#, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Ich konnte die Firmware-Datei für %s nicht installieren!"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr "Die Firmware Datei für Ihren %s wurde erfolgreich installiert"
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "Der Scanner „%s“ wird NICHT unterstützt"
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"Der %s muss von PrinterDrake konfiguriert werden.\n"
-"Sie können PrinterDrake im %s Kontrollzentrum im Hardware-Bereich starten."
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Verfügbare Ports automatisch erkennen"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Bitte wählen Sie den Gerätenamen, an dem Ihr „%s“ hängt."
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Anmerkung: Parallelports können nicht automatisch erkannt werden)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "Gerät wählen"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Suche nach neuen Scannern ..."
-
-#: standalone/scannerdrake:383
-#, c-format
-msgid "Setting up kernel modules..."
-msgstr "Kernelmodule einrichten..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, c-format
-msgid "Attention!"
-msgstr "Achtung!"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-"Ihr %s kann nicht vollständig automatisch eingerichtet werden.\n"
-"\n"
-"Manuelle Anpassungen sind nötig. Bitte bearbeiten Sie die "
-"Konfigurationsdatei /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-"Weitere Informationen finden Sie im Treiberhandbuch. Rufen Sie den Befehl "
-"\"man sane-%s\" auf und lesen sie es."
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Danach können Sie Dokumente mit \"XSane\" oder \"Kooka\" im Menu Multimedia/"
-"Grafik scannen."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-"Ihr %s wurde eingerichtet aber es ist möglich, dass zusätzliche manuelle "
-"Einstellungen nötig sind, um ihn zum Laufen zu bekommen. "
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-"Wenn er nicht im Scannerdrake-Hauptfenster in der Liste der eingerichteten "
-"Scanner erscheint oder wenn er nicht richtig funktioniert, "
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "Bearbeiten Sie die Konfigurationsdatei /etc/sane.d/%s.conf. "
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"Ihr %s wurde konfiguriert.\n"
-"Sie können nun Dokumente mit „XSane“ oder „Kooka“ scannen (unter „Multimedia/"
-"Graphik“ im Mandriva-Menü)."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Die folgenden Scanner\n"
-"\n"
-"%s\n"
-"sind direkt an Ihr System angeschlossen.\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"Der folgende Scanner\n"
-"\n"
-"%s\n"
-"ist direkt an Ihr System angeschlossen.\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Ich konnte keine Scanner direkt an Ihrem Rechner finden.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Suche nach neuen Scannern"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Scanner manuell hinzufügen"
-
-#: standalone/scannerdrake:465
-#, c-format
-msgid "Install/Update firmware files"
-msgstr "Installieren/Aktualisieren der Firmware Datei"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Gemeinsamer Scannerzugriff"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Alle entfernten Maschinen"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Dieser Rechner"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Hier können Sie einstellen, ob die Scanner, die an diesem Rechner hängen, "
-"für andere Rechner nutzbar sein sollen und falls ja, für welche."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Sie können hier entscheiden, ob Scanner von anderen Rechnern automatisch auf "
-"diesem Rechner zur Verfügung gestellt werden sollen."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Die Scanner dieses Rechners sind für andere Rechner nutzbar"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Scanner mit folgenden Rechnern teilen:"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Benutze Scanner auf entfernten Computern"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Verwende die Scanner am Rechner:"
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Gemeinsamer Zugriff auf lokale Scanner"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-"Das sind die Rechner und Netzwerke, für die die lokalen Scanner zugänglich "
-"sein sollen:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Hinzufügen eines Rechners"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Änderung des markierten Rechners"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Löschen des markierten Rechners"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Name/IP-Adresse des Rechners:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-"Wählen Sie den Rechner, dem der lokale Scanner bekannt gemacht werden soll:"
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Sie müssen einen Rechnernamen oder eine IP eingeben.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-"Der Computer ist bereits in der Liste, er kann nicht erneut hinzugefügt "
-"werden.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Scanner an anderen Rechnern nutzen"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "Das sind die Rechner, für die der Scanner zugänglich sein soll:"
-
-#: standalone/scannerdrake:940
-#, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr ""
-"Das Programm „saned“ muss installiert werden um Ihre lokalen Sanner\n"
-"freizugeben.\n"
-"Möchten Sie „saned“ nun installieren?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr "Ihre Scanner werden nicht im Netzwerk verfügbar sein."
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Einige Geräte in der Klasse %s wurden entfernt:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr "- %s wurde entfernt\n"
-
-#: standalone/service_harddrake:108
-#, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Einige Geräte wurden hinzugefügt:%s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr "- %s wurde hinzugefügt\n"
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Hardwareerkennung läuft"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr "Hardwareänderungen in der „%s“-Klasse (%s Sekunden zum Antworten)"
-
-#: standalone/service_harddrake_confirm:8
-#, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Möchten Sie die zugehörenden Einstellungen aufrufen?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Sprache auswählen"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Lizenz"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Maus konfigurieren"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Festplatten suchen"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Installationsart auswählen"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Tastatur auswählen"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Partitionierung"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Partitionen formatieren"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Zu installierende Pakete"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "System installieren"
-
-#: steps.pm:25
-#, c-format
-msgid "Administrator password"
-msgstr "Administratorpasswort"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Benutzer hinzufügen"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Netzwerk konfigurieren"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Betriebssystemstarter"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "X konfigurieren"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Dienste konfigurieren"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Aktualisierungen"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Installation beenden"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Ist dies richtig?"
-
-#: ugtk2.pm:968
-#, c-format
-msgid "No file chosen"
-msgstr "Keine Datei ausgewählt"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Sie haben eine Datei ausgewählt, kein Verzeichnis"
-
-#: ugtk2.pm:972
-#, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Sie haben ein Verzeichnis ausgewählt, keine Datei"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such directory"
-msgstr "Das Verzeichnis existiert nicht"
-
-#: ugtk2.pm:974
-#, c-format
-msgid "No such file"
-msgstr "Die Datei existiert nicht"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Baum erweitern"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Baum verkleinern"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Umschalten zwischen unsortiert und gruppiert"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"%s ist nicht installiert\n"
-"Wählen Sie „Weiter“ für die Installation, oder „Abbrechen“ zum Beenden."
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Die Installation schlug fehl!"
-
-#~ msgid "Number of logical extents: %d"
-#~ msgstr "Anzahl logischer Abgrenzungen: %d"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Ihr Rechner hat nicht genug Ressourcen. Vermutlich werden bei der \n"
-#~ "Installation Probleme auftreten. In diesem Fall sollten Sie eine \n"
-#~ "Text-Installation versuchen. Drücken Sie dafür <F1> während dem \n"
-#~ "Installationsstart und geben Sie „text“ an der Eingabeaufforderung \n"
-#~ "ein."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Kontaktiere Mandriva Linux Web-Server, um eine Liste verfügbarer Pakete "
-#~ "zu erhalten..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Mandriva Linux-Installation %s"
-
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "WARNUNG: Dieses Gerät wurde bereits zum Herstellen einer "
-#~ "Internetverbindung konfiguriert.\n"
-#~ "Fall Sie Felder verändern, wird die Konfiguration überschrieben.\n"
-#~ "Möchten Sie dieses Gerät wirklich neu konfigurieren?"
-
-#~ msgid ""
-#~ "        - Create etherboot floppies/CDs:\n"
-#~ "        \tThe diskless client machines need either ROM images on the NIC, "
-#~ "or a boot floppy\n"
-#~ "        \tor CD to initiate the boot sequence.  drakTermServ will help "
-#~ "generate these\n"
-#~ "        \timages, based on the NIC in the client machine.\n"
-#~ "        \t\t\n"
-#~ "        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-#~ "manually:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-#~ msgstr ""
-#~ "        - Etherboot Disketten/CDs erstellen:\n"
-#~ "        \tDie festplattenlosen Clients brauchen entweder ROM-Abbilder auf "
-#~ "der Netzwerkkarte oder\n"
-#~ "        \teine Startdiskette or CD um den Startablauf auszulösen. "
-#~ "drakTermServ wird helfen, diese\n"
-#~ "        \tAbbilder auf Grundlage der Netzwerkkarten der Clientrechner zu "
-#~ "erstellen.\n"
-#~ "        \t\t\n"
-#~ "        \tEin grundlegendes Beispiel zum Erstellen einer Startdiskette "
-#~ "für eine 3Com 3c509 von Hand:\n"
-#~ "        \t\t\n"
-#~ "        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
-#~ "        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
-#~ "        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
-
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Pool dynamischer IP-Adressen:"
-
-#~ msgid "hd"
-#~ msgstr "Festplatte"
-
-#~ msgid "tape"
-#~ msgstr "Bandlaufwerk"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "Die entfernte WebDAV Seite ist bereits synchronisiert!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "WebDAV-Übertragung schlug fehl!"
-
-#~ msgid ""
-#~ "Backup quota exceeded!\n"
-#~ "%d MB used vs %d MB allocated."
-#~ msgstr "Sicherungsquote erschöpft!n%d MB genutzt von %d MB reserviert."
-
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Bitte geben Sie die Maximalgröße \n"
-#~ "für DrakBackup an."
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t* Netzwerk per webdav.\n"
-
-#~ msgid "Use graphical boot"
-#~ msgstr "Benutze grafisches Booten"
-
-#~ msgid "first step creation"
-#~ msgstr "Erster Schritt-Erstellung"
-
-#~ msgid "choose image file"
-#~ msgstr "Image-Datei auswählen"
-
-#~ msgid "Browse"
-#~ msgstr "Durchsuchen"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Bootsplash-Bild konfigurieren"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "Die Farbe des Fortschrittbalkens"
-
-#~ msgid "Preview"
-#~ msgstr "Vorschau"
-
-#~ msgid "Choose color"
-#~ msgstr "Farbauswahl"
-
-#~ msgid "Make kernel message quiet by default"
-#~ msgstr "Standardmäßiges unterdrücken der Bootmeldungen"
-
-#~ msgid "Notice"
-#~ msgstr "Anmerkung"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "Dieses Design hat noch keinen Bootsplash in %s!"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Sie müssen zuerst eine Image-Datei auswählen!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Erzeuge Vorschau..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "%s BootSplash (%s) Vorschau"
-
-#~ msgid ""
-#~ "The image \"%s\" cannot be load due to the following issue:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
-#~ msgstr ""
-#~ "Das Bild „%s“ kann aufgrund des folgenden Sachverhaltes nicht geladen "
-#~ "werden:\n"
-#~ "\n"
-#~ "<span foreground=\"Red\">%s</span>"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
deleted file mode 100644
index 2e9f48728..000000000
--- a/perl-install/share/po/el.po
+++ /dev/null
@@ -1,26088 +0,0 @@
-# translation of DrakX-el.po to Greek
-# Greek translation for drakfloppy.
-# Copyright (C) 2001,2003 Free Software Foundation, Inc.
-# Thanos Kyritsis <djart@hellug.gr>, 2001.
-#  Νίκος Νύκταρης (Nick Niktaris) <niktarin@yahoo.com>, 2003
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX-el\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2004-09-15 13:28+0200\n"
-"Last-Translator:  Νίκος Νύκταρης (Nick Niktaris) <niktarin@yahoo.com>\n"
-"Language-Team: Greek <nls@tux.hellug.gr>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.0.1\n"
-
-#: ../move/move.pm:292
-#, fuzzy, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Τι τύπου επιλογή θέλετε να προσθέσετε;"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, fuzzy, c-format
-msgid "Key is not writable"
-msgstr "Το XawTV εγκαταστάθηκε!"
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#: ../move/move.pm:452
-#, c-format
-msgid "Retry"
-msgstr "Προσπάθεια ξανά"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr ""
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Επανεκκίνηση"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr ""
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr ""
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Setting up USB key"
-msgstr "Γίνεται ρύθμιση των συσκευών PNP ISA: "
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "Παρακαλώ περιμένετε, ρυθμίζεται το επίπεδο ασφαλείας..."
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-
-#: ../move/move.pm:556
-#, fuzzy, c-format
-msgid "Auto configuration"
-msgstr "Προσαρμοσμένη Ρύθμιση"
-
-#: ../move/move.pm:556
-#, fuzzy, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Παρακαλώ περιμένετε, ρυθμίζεται το επίπεδο ασφαλείας..."
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Σφάλμα"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Προκλήθηκε ένα σφάλμα που δεν ξέρω πώς να το χειριστώ.\n"
-"Συνεχίστε με δική σας ευθύνη."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Προκλήθηκε σφάλμα"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#: ../move/move.pm:681
-#, fuzzy, c-format
-msgid "Remove system config files"
-msgstr "Να αφαιρεθεί το αρχείο loopback;"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr ""
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:71
-#, fuzzy, c-format
-msgid "Kill those programs"
-msgstr "πρόσβαση σε προγράμματα Χ"
-
-#: ../move/tree/mdk_totem:72
-#, fuzzy, c-format
-msgid "No CDROM support"
-msgstr "Υποστήριξη ραδιοφώνου:"
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Διαβάστε προσεκτικά!"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 kB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 kB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB ή περισσότερα"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "εξυπηρετητής X"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Επιλέξτε τον εξυπηρετητή Χ"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Ρύθμιση πολλών κεφαλών"
-
-#: Xconfig/card.pm:193
-#, fuzzy, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"\n"
-" Τι?"
-
-#: Xconfig/card.pm:262
-#, fuzzy, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Εγκατάσταση πακέτου %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Επιλέξτε το μέγεθος μνήμης της κάρτας γραφικών"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Ρυθμίσεις Xorg"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Τι ρύθμιση Xorg θέλετε να έχετε;"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Ρύθμιση όλων των κεφαλών ανεξάρτητα"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Χρήση επέκτασης Xinerama"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Ρύθμιση μόνο της κάρτας \"%s\" %s"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s με επιτάχυνση τρισδιάστατων γραφικών"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr ""
-"Η κάρτα γραφικών σας υποστηρίζει επιτάχυνση τρισδιάστατων γραφικών στα Xorg %"
-"s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s με ΠΕΙΡΑΜΑΤΙΚΗ επιτάχυνση τρισδιάστατων γραφικών"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Η κάρτα γραφικών σας υποστηρίζει επιτάχυνση τρισδιάστατων γραφικών στα Xorg %"
-"s,\n"
-"ΠΡΟΣΟΧΗ: ΠΕΙΡΑΜΑΤΙΚΗ ΥΠΟΣΤΗΡΙΞΗ - ΜΠΟΡΕΙ ΝΑ ΠΑΓΩΣΕΙ ΤΟΝ ΥΠΟΛΟΓΙΣΤΗ ΣΑΣ."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Προσαρμοσμένο"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Έξοδος"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Κάρτα Γραφικών"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Οθόνη"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Ανάλυση"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Δοκιμή"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Επιλογές"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Διατήρηση υπαρχόντων ρυθμίσεων;\n"
-"Οι τρέχουσες ρυθμίσεις είναι:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, fuzzy, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Επιλέξτε οθόνη"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Επιλέξτε οθόνη"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr "Άμεσης τοποθέτησης και λειτουργίας"
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Γενική"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Κατασκευαστής"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Οι δύο κρίσιμες παράμετροι είναι η συχνότητα κατακόρυφης ανανέωσης είναι η\n"
-"συχνότητα με την οποία ανανεώνεται ολόκληρη η οθόνη, καθώς και η συχνότητα\n"
-"οριζόντιας ανανέωσης, η οποία είναι η συχνότητα με την οποία ανανεώνονται\n"
-"οι οριζόντιες γραμμές.\n"
-"\n"
-"Είναι ΠΟΛΥ ΣΗΜΑΝΤΙΚΟ να μην επιλέξετε τύπο οθόνης του οποίου οι συχνότητες\n"
-"ανανέωσης είναι εκτός των ορίων της οθόνης σας: υπάρχει κίνδυνος "
-"καταστροφής\n"
-"της οθόνης σας. Αν δεν είστε σίγουροι, κάντε μια συντηρητική επιλογή."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Συχνότητα οριζόντιας ανανέωσης"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Συχνότητα κατακόρυφης ανανέωσης"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 χρώματα (8 bits)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 χιλιάδες χρώματα (15 bits)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 χιλιάδες χρώματα (16 bits)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 εκατομμύρια χρώματα (24 bits)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Αναλύσεις"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Άλλο"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Επιλέξτε ανάλυση και βάθος χρώματος"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Κάρτα γραφικών: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "Εντάξει"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Άκυρο"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Βοήθεια"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Δοκιμή ρυθμίσεων"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Θέλετε να δοκιμάσετε τις ρυθμίσεις;"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr ""
-"Προσοχή: Η δοκιμή σε αυτή την κάρτα γραφικών μπορεί να παγώσει τον "
-"υπολογιστή σας"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Παρουσιάστηκεένα σφάλμα:\n"
-"%s\n"
-"Δοκιμάστε να αλλάξετε μερικές παραμέτρους"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Έξοδος σε %d δευτερόλεπτα"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Είναι σωστή η ρύθμιση;"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Διάταξη πληκτρολογίου: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Τύπος ποντικιού: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Συσκευή ποντικιού: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Οθόνη: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Συχνότητα οριζόντιας ανανέωσης: %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Συχνότητα κατακόρυφης ανανέωσης: %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Κάρτα γραφικών: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Μνήμη κάρτας γραφικών: %s kB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Βάθος χρώματος: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Ανάλυση: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Οδηγός Xorg: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Γραφικό περιβάλλον στην εκκίνηση"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Μπορώ να ρυθμίσω το σύστημά σας έτσι ώστε να ξεκινάει αυτόματα σε\n"
-"γραφικό περιβάλλον (Xorg).\n"
-"Επιθυμείτε την αυτόματη εκκίνηση γραφικού περιβάλλοντος;"
-
-#: Xconfig/various.pm:87
-#, fuzzy, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ολοκληρώθηκε?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Ποιο σύστημα χρησιμοποιεί η τηλεόραση σας;"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Παρακαλώ περιμένετε"
-
-#: any.pm:143
-#, fuzzy, c-format
-msgid "Bootloader installation in progress"
-msgstr "Πρόγραμμα εκκίνησης"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr ""
-"Η εγκατάσταση του προγράμματος εκκίνησης απέτυχε. Προκλήθηκε το ακόλουθο "
-"σφάλμα:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Μπορεί να χρειαστεί να αλλάξετε την Open Firmware boot-συσκευή ώστε να\n"
-" ενεργοποιήσετε το πρόγραμμα εκκίνησης.  Αν στην επανεκκίνηση δεν δείτε την "
-"προτροπή του πρόγραμμα εκκίνησης,\n"
-"πατήστε το Command-Option-O-F κατά την επανεκκίνηση και εισάγετε:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Μετά γράψτε: shut-down\n"
-"Στην επόμενη εκκίνηση θα πρέπει να δείτε την προτροπή του προγράμματος "
-"εκκίνησης ."
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Επιλέξατε να εγκαταστήσετε το πρόγραμμα εκκίνησης σε μια κατάτμηση.\n"
-"Εννοείτε ότι έχετε ήδη εγκατάσταση ένα άλλο πρόγραμμα εκκίνησης στον σκληρό  "
-"σας δίσκο (π.χ. System Commander).\n"
-"\n"
-"Από ποιόν δίσκο ξεκινάτε;"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Πρώτος τομέας του δίσκου (MBR)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Πρώτος τομέας της κατάτμησης εκκίνησης"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Στην Δισκέτα"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Παράλειψη"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "Εγκατάσταση LILO/grub"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Πού θέλετε να εγκαταστήσετε το πρόγραμμα εκκίνησης;"
-
-#: any.pm:268 standalone/drakboot:261
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Ρύθμιση Τύπου Εκκίνησης"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Βασικές επιλογές προγράμματος εκκίνησης"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Εισάγετε μέγεθος μνήμης σε MB"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Η επιλογή ``Απαγόρευση επιλογών γραμμής εντολής'' είναι άχρηστη χωρίς κωδικό "
-"πρόσβασης"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "Οι κωδικοί πρόσβασης είναι ανόμοιοι"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Παρακαλώ προσπαθήστε ξανά"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Χρήση προγράμματος εκκίνησης"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Συσκευή εκκίνησης"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Καθυστέρηση πριν την εκκίνηση"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Ενεργοποίηση ACPI"
-
-#: any.pm:289
-#, c-format
-msgid "Force no APIC"
-msgstr ""
-
-#: any.pm:291
-#, c-format
-msgid "Force No Local APIC"
-msgstr ""
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Κωδικός Πρόσβασης"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Κωδικός Πρόσβασης (ξανά)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Απαγόρευση επιλογών γραμμής εντολής"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "απαγόρευση"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Καθαρισμός /tmp σε κάθε εκκίνηση"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ακριβής ποσότητας μνήμης αν χρειάζεται (εντοπίστηκαν %d MB)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr "Μήνυμα Init"
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Άνοιγμα Καθυστέρησης Firmware"
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Τέλος Χρόνου Εκκίνησης Πυρήνα"
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Ενεργοποίηση εκκίνησης από CD;"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Ενεργοποίηση OF εκκίνησης;"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "Εξ ορισμού λειτουργικό;"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Εικόνα"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Root"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Προσάρτηση"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Ανάλυση οθόνης"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, fuzzy, c-format
-msgid "Network profile"
-msgstr "Νέο Προφίλ..."
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Ετικέτα"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Προεπιλεγμένο"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "μέγεθος Initrd"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr "ΧωρίςVideo"
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Δεν επιτρέπεται άδεια ετικέτα"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Πρέπει να ορίσετε μια εικόνα πυρήνα"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Πρέπει να ορίσετε μια κατάτμηση root"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Αυτή η ετικέτα χρησιμοποιείται ήδη"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Τι τύπου επιλογή θέλετε να προσθέσετε;"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linux"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Άλλο λειτουργικό (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Άλλο λειτουργικό (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Άλλο λειτουργικό (Windows...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Υπάρχουν οι ακόλουθες επιλογές.\n"
-"Μπορείτε να προσθέσετε κι άλλες ή να αλλάξετε τις υπάρχουσες."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "πρόσβαση σε προγράμματα Χ"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "πρόσβαση σε εργαλεία rpm"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "δυνατότητα \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "πρόσβαση σε διαχειριστικά αρχεία"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "πρόσβαση σε εργαλεία δικτύου"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr ""
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(το %s έχει ήδη προστεθεί)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Ο κωδικός πρόσβασης είναι πολύ απλός"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Παρακαλώ εισάγετε όνομα χρήστη"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Το κωδικό όνομα μπορεί να περιέχει μόνο πεζά γράμματα, αριθμούς, `-' και `_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Αυτό το όνομα χρήστη είναι πολύ μακρύ"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Αυτό το όνομα χρήστη υπάρχει ήδη"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Προσθήκη χρήστη"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Εισάγετε χρήστη\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Ολοκληρώθηκε"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Αποδοχή χρήστη"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Πραγματικό όνομα"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, fuzzy, c-format
-msgid "Login name"
-msgstr "Όνομα Τομέα"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Φλοιός (shell)"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Εικονίδιο"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Αυτόματη σύνδεση"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Μπορώ να ρυθμίσω το σύστημά σας έτσι ώστε να συνδέει αυτόματα έναν χρήστη."
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Θέλετε να χρησιμοποιήσετε αυτή τη λειτουργία;"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Ναι"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Όχι"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Επιλέξτε τον προεπιλεγμένο χρήστη:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Επιλέξτε τον διαχειριστή παραθύρων που θέλετε να χρησιμοποιήσετε:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Παρακαλώ επιλέξτε τη γλώσσα."
-
-#: any.pm:707
-#, fuzzy, c-format
-msgid "Language choice"
-msgstr "χειροκίνητα"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Το Mandriva Linux υποστηρίζει πολλαπλές γλώσσες.Επιλέξτε \n"
-"τις άλλες γλώσσες που θα είναι διαθέσιμες μετά το πέρας της \n"
-"εγκατάστασης και την επανεκκίνηση του συστήματός σας."
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Προεπιλεγμένη η χρήση Unicode"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Όλες οι γλώσσες"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Χώρα"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Παρακαλώ επιλέξτε την χώρα σας."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Αυτή είναι η πλήρης λίστα των διαθέσιμων χωρών"
-
-#: any.pm:798
-#, fuzzy, c-format
-msgid "Other Countries"
-msgstr "Άλλες θύρες"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Για Προχωρημένους"
-
-#: any.pm:806
-#, fuzzy, c-format
-msgid "Input method:"
-msgstr "Μέθοδος δικτύου:"
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Κανένας"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Χωρίς κοινή χρήση"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Επιτρέπεται για όλους τους χρήστες"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Θέλετε να επιτρέψετε στους χρήστες να έχουν κοινόχρηστους καταλόγους;\n"
-"Αν ναι τότε οι χρήστες θα μπορούν απλά να κάνουν κλικ στο \"Κοινόχρηστο\" "
-"στον konqueror και το nautilus.\n"
-"\n"
-"Το \"Προσαρμοσμένο\" επιτρέπει την ανά χρήστη ρύθμιση.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr ""
-"Μπορείτε να γίνει εξαγωγή με την χρήση NFS ή SMB. Παρακαλώ επιλέξτε ποίο "
-"θέλετε."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Εκκίνηση userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Κλείσιμο"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-"Το κοινόχρηστο ανά χρήστη κάνει χρήση της ομάδας \"fileshare\". \n"
-"Μπορείτε να την προσθέσετε στον κάθε χρήστη σε αυτή την ομάδα με το "
-"userdrake."
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Τοπικό αρχείο"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, fuzzy, c-format
-msgid "Smart Card"
-msgstr "Κάρτα Ethernet"
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Τομέας Windows "
-
-#: authentication.pm:29
-#, fuzzy, c-format
-msgid "Active Directory with SFU"
-msgstr "Επαναφορά όλων των αντιγράφων ασφαλείας"
-
-#: authentication.pm:30
-#, fuzzy, c-format
-msgid "Active Directory with Winbind"
-msgstr "Επαναφορά όλων των αντιγράφων ασφαλείας"
-
-#: authentication.pm:56
-#, fuzzy, c-format
-msgid "Local file:"
-msgstr "Τοπικά αρχεία:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Τομέας Windows :"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, fuzzy, c-format
-msgid "Active Directory with SFU:"
-msgstr "Επαναφορά όλων των αντιγράφων ασφαλείας"
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, fuzzy, c-format
-msgid "Active Directory with Winbind:"
-msgstr "Επαναφορά όλων των αντιγράφων ασφαλείας"
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Πιστοποίηση LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "Εξυπηρετητής LDAP"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "απλό"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, fuzzy, c-format
-msgid "Authentication Active Directory"
-msgstr "Πιστοποίηση"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Τομέας"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Εξυπηρετητής"
-
-#: authentication.pm:115
-#, fuzzy, c-format
-msgid "LDAP users database"
-msgstr "Βάση Δεδομένων"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, fuzzy, c-format
-msgid "Password for user"
-msgstr "Απαιτείται κωδικός πρόσβασης"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Κρυπτογράφηση"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Πιστοποίηση NIS"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "Τομέας NIS"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "Εξυπηρετητής NIS"
-
-#: authentication.pm:137
-#, fuzzy, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-"Τομέας Windows  εξυπηρετητής\n"
-" Τομέας Τομέας Windows \n"
-"\n"
-" Τομέας Windows  Τομέας Όνομα χρήστη Κωδικός Πρόσβασης\n"
-"."
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Πιστοποίηση Τομέα Windows"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Όνομα Χρήστη Διαχειριστή Τομέα"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr "Κωδικός Πρόσβασης Διαχειριστή Τομέα"
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, fuzzy, c-format
-msgid "Default Idmap "
-msgstr "Προεπιλεγμένο"
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-
-#: authentication.pm:172
-#, fuzzy, c-format
-msgid "Set administrator (root) password"
-msgstr "Κωδικός πρόσβασης root"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, fuzzy, c-format
-msgid "Authentication method"
-msgstr "Πιστοποίηση"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Χωρίς κωδικό πρόσβασης"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Αυτός ο κωδικός πρόσβασης είναι πολύ απλός (πρέπει να έχει τουλάχιστον %d "
-"χαρακτήρες)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Πιστοποίηση"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr "Δεν μπορώ να χρησιμοποιήσω broadcast χωρίς τομέα NIS"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, fuzzy, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n"
-"\n"
-"EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n"
-"H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO με γραφικό μενού"
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO με μενού κειμένου"
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "δεν υπάρχει αρκετός χώρος στο /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Δεν μπορείτε να εγκαταστήσετε το πρόγραμμα εκκίνησης σε κατάτμηση %s\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-
-#: bootloader.pm:1437
-#, fuzzy, c-format
-msgid "Re-install Boot Loader"
-msgstr "Πρόγραμμα εκκίνησης"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d λεπτά"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 λεπτό"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d δευτερόλεπτα"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "το kdesu λείπει"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr "το consolehelper λείπει"
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Αυστρία"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Αυστραλία"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Βέλγιο"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Βραζιλία"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Καναδάς"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Ελβετία"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Κόστα Ρίκα"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "Τσέχικη Δημοκρατία"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Γερμανία"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Δανία"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Εσθονία"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Ισπανία"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Φινλανδία"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Γαλλία"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Ελλάδα"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Ουγγαρία"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Ιρλανδία"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Ισραήλ"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Ιταλία"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Ιαπωνία"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Ολλανδία"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Νορβηγία"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Νέα Ζηλανδία"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Πολωνία"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Πορτογαλία"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Ρωσία"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Σουηδία"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Σλοβακία"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Ταϊλάνδη"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Ταϊβάν"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Νότιος Αφρική"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Η.Π.Α."
-
-#: diskdrake/dav.pm:17
-#, fuzzy, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"εξυπηρετητής\n"
-" εξυπηρετητής\n"
-" εξυπηρετητής\n"
-" Νέο."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Νέο"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Αποσύνδεση"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Σύνδεση"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Σημείο σύνδεσης"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Παρακαλώ εισάγετε την  διεύθυνση του εξυπηρετητή WebDAV"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Η διεύθυνση πρέπει να ξεκινά με http:// ή https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Εξυπηρετητής:"
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Σημείο σύνδεσης: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Επιλογές: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Παρακαλώ κάντε πρώτα ένα αντίγραφο ασφαλείας των δεδομένων σας"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Εάν σκοπεύετε να χρησιμοποιήσετε το aboot, προσέξτε να αφήσετε ελεύθερο χώρο "
-"(2048 τομείς είναι αρκετοί)\n"
-"στην αρχή του δίσκου"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Οδηγός"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Επιλέξτε πράξη"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Έχετε μια μεγάλη κατάτμηση των Microsoft Windows \n"
-"Προτείνω πρώτα να αλλάξετε το μέγεθός της\n"
-"(Κάντε κλικ επάνω της και επιλέξτε \"Αλλαγή Μεγέθους\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Παρακαλώ κάντε κλικ σε μια κατάτμηση"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Λεπτομέρειες"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Δεν βρέθηκαν δίσκοι!"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Windows "
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Άδειο"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Τύποι συστήματος αρχείων:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Χρησιμοποιήστε ``%s'' στη θέση του"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Δημιουργία"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Τύπος"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Διαγραφή"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Κάντε πρώτα ``Αποσύνδεση''"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Επιλέξτε άλλη κατάτμηση"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Επιλέξτε κατάτμηση"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Έξοδος"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Αναίρεση"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Αλλαγή σε κανονικό τρόπο λειτουργίας"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Αλλαγή σε προχωρημένο τρόπο λειτουργίας"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Να συνεχίσω;"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Έξοδος χωρίς αποθήκευση"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Έξοδος χωρίς αποθήκευση του πίνακα κατατμήσεων;"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Θέλετε να αποθηκεύσετε τις αλλαγές του /etc/fstab"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Απαιτείται επανεκκίνηση για να ενεργοποιηθούν οι αλλαγές στον πίνακα "
-"κατατμήσεων"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Καθαρισμός όλων"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Αυτόματη κατανομή"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Άλλα"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Πληροφορίες σκληρού δίσκου"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Όλες οι πρωτεύουσες κατατμήσεις είναι σε χρήση"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Δεν μπορώ να προσθέσω κατατμήσεις"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Για να προσθέσετε κατατμήσεις, παρακαλώ διαγράψτε μία έτσι ώστε να είναι "
-"δυνατή η προσθήκη εκτεταμένης κατάτμησης"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Αποθήκευση πίνακα κατατμήσεων"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Επαναφορά πίνακα κατατμήσεων"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Πίνακας κατατμήσεων διάσωσης"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Ανανέωση πίνακα κατατμήσεων"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Αυτόματη σύνδεση αποσπώμενων μονάδων"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Επιλέξτε αρχείο"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"Ο εφεδρικός πίνακας κατατμήσεων έχει διαφορετικό μέγεθος\n"
-"Να συνεχίσω;"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Προσπάθεια διάσωσης πίνακα κατατμήσεων"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Λεπτομερείς πληροφορίες"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Αλλαγή μεγέθους"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Μορφοποίηση"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Προσθήκη στο RAID"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Προσθήκη στο LVM"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Αφαίρεση από το RAID"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Αφαίρεση από το LVM"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Τροποποίηση RAID"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Χρήση για loopback"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Δημιουργία νέας κατάτμησης"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Αρχικός τομέας: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Μέγεθος σε MB"
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Τύπος συστήματος αρχείων: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Προτίμηση: "
-
-#: diskdrake/interactive.pm:526
-#, fuzzy, c-format
-msgid "Logical volume name "
-msgstr "Τοπική μέτρηση"
-
-#: diskdrake/interactive.pm:556
-#, fuzzy, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"νέο\n"
-" πρωτεύουσα\n"
-" πρωτεύουσα."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Να αφαιρεθεί το αρχείο loopback;"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Μετά την αλλαγή τύπου στην κατάτμηση %s, όλα τα δεδομένα σε αυτήν την "
-"κατάτμηση θα χαθούν"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Αλλαγή τύπου κατάτμησης"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Ποιο σύστημα αρχείων προτιμάτε;"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Αλλαγή από ext2 σε ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Πού θέλετε να συνδέσετε το αρχείο loopback %s;"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Πού θέλετε να συνδέσετε την συσκευή %s;"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Δεν μπορώ να αφαιρέσω το σημείο σύνδεσης καθώς αυτή η κατάτμηση "
-"χρησιμοποιείται\n"
-"για loopback. Αφαιρέστε πρώτα το loopback"
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Πού θέλετε να συνδέσετε το %s;"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Αλλαγή μεγέθους"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Υπολογισμός FAT filesystem bounds"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Αυτή η κατάτμηση δεν μπορεί ν' αλλάξει μέγεθος."
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr ""
-"Πρέπει να γίνει αντίγραφο ασφαλείας όλων των δεδομένων σε αυτή την κατάτμηση"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Μετά την αλλαγή μεγέθους στην κατάτμηση %s, όλα τα δεδομένα σε αυτήν την "
-"κατάτμηση θα χαθούν"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Επιλέξτε το νέο μέγεθος"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Νέο μέγεθος σε MB:"
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Επιλέξτε ένα υπάρχον RAID στο οποίο θα γίνει η προσθήκη"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "νέο"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Επιλέξτε ένα υπάρχον LVM στο οποίο θα γίνει η προσθήκη"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "όνομα LVM;"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Αυτή η κατάτμηση δεν μπορεί να χρησιμοποιηθεί για loopback"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Loopback"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Όνομα αρχείου loopback: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Δώστε ένα όνομα αρχείου"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Το αρχείο χρησιμοποιείται ήδη από άλλο loopback, επιλέξτε ένα άλλο"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Το αρχείο υπάρχει ήδη. Να το χρησιμοποιήσω;"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Επιλογές σύνδεσης"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Διάφορα"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "συσκευή"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "επίπεδο"
-
-#: diskdrake/interactive.pm:1023
-#, fuzzy, c-format
-msgid "chunk size in KiB"
-msgstr "μέγεθος chunk"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Προσοχή: Αυτή η διαδικασία είναι επικίνδυνη."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Τι τύπος κατάτμησης;"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Απαιτείται επανεκκίνηση για να εφαρμοστούν οι αλλαγές"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ο πίνακας κατατμήσεων του δίσκου %s θα αποθηκευτεί στον δίσκο!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Μετά την μορφοποίηση της κατάτμησης %s, όλα τα δεδομένα σε αυτήν την "
-"κατάτμηση θα χαθούν"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Μετακίνηση αρχείων στην νέα κατάτμηση"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Απόκρυψη αρχείων"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Ο κατάλογος %s περιέχει ήδη δεδομένα\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Μετακίνηση αρχείων στην νέα κατάτμηση"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Αντιγραφή %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Αφαίρεση %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "Η κατάτμηση %s είναι τώρα γνωστή ως %s "
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Συσκευή: "
-
-#: diskdrake/interactive.pm:1187
-#, fuzzy, c-format
-msgid "Devfs name: "
-msgstr "Όνομα συστήματος: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Πιθανό DOS γράμμα δίσκου: %s \n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Τύπος: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Όνομα: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Αρχή: τομέας %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Μέγεθος: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s τομείς"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Κύλινδρος από %d έως %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Μορφοποιημένος\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Αμορφοποίητος\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Συνδεδεμένος\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Αρχείο (α) loopback:\n"
-"   %s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Κατάτμηση εκκίνησης εξ ορισμού\n"
-"    (από MS-DOS, όχι από lilo)\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Επίπεδο %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, fuzzy, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Μέγεθος chunk %s\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "Δίσκοι RAID %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Όνομα αρχείου loopback: %s"
-
-#: diskdrake/interactive.pm:1226
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"\n"
-" Οδηγός\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"Αυτή είναι ειδική Bootstrap\n"
-"κατάτμηση για\n"
-"dual-booting το σύστημά σας.\n"
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Μόνο για ανάγνωση"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Μέγεθος: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Γεωμετρία: %s κύλινδροι, %s κεφαλές, %s τομείς\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Πληροφορίες: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "Δίσκοι LVM %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Τύπος πίνακα κατατμήσεων: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "στο κανάλι %d id %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Κλειδί κρυπτογράφησης συστήματος αρχείων"
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Επιλέξτε το κλειδί κρυπτογράφησης του συστήματος αρχείων"
-
-#: diskdrake/interactive.pm:1291
-#, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Αυτός ο κωδικός πρόσβασης είναι πολύ απλός (πρέπει να έχει τουλάχιστον %d "
-"χαρακτήρες)"
-
-#: diskdrake/interactive.pm:1292
-#, c-format
-msgid "The encryption keys do not match"
-msgstr "Τα κλειδιά κρυπτογράφησης είναι ανόμοια"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr "Κλειδί κρυπτογράφησης"
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr "Κλειδί κρυπτογράφησης (ξανά)"
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, fuzzy, c-format
-msgid "Encryption algorithm"
-msgstr "Πιστοποίηση"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Αλλαγή τύπου"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "Αδυναμία προσπέλασης με το όνομα χρήστη %s  (λάθος κωδικός)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Απαιτείται Πιστοποίηση Τομέα"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Ποίο όνομα χρήστη"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Και άλλο"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Παρακαλώ εισάγετε το όνομα χρήστη τον κωδικό πρόσβασης και το όνομα τομέα "
-"για τη σύνδεση στον host."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Όνομα χρήστη"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Αναζήτηση διακομιστών"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, fuzzy, c-format
-msgid "Search new servers"
-msgstr "Αναζήτηση διακομιστών"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Το πακέτο %s πρέπει να αναβαθμιστεί. Θέλετε να το εγκαταστήσετε;"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Ένα απαραίτητο αρχείο (το %s ) δεν υπάρχει"
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Εγκατάσταση πακέτων..."
-
-#: do_pkgs.pm:227
-#, fuzzy, c-format
-msgid "Removing packages..."
-msgstr "Αφαιρείται ο %s..."
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Προσάρτηση κατάτμησης %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "η σύνδεση της κατάτμησης %s στον κατάλογο %s απέτυχε"
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Έλεγχος %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "σφάλμα κατά την αποσύνδεση του %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Ενεργοποίηση κατάτμησης swap %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Μορφοποίηση κατάτμησης %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Δημιουργία και μορφοποίηση αρχείου %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "δεν ξέρω πώς να μορφοποιήσω το %s σε τύπο %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s μορφοποίηση του %s απέτυχε"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr ""
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr ""
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr ""
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr ""
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr ""
-"Δεν μπορείτε να χρησιμοποιήσετε το JFS για κατατμήσεις μικρότερες από 16MB"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr ""
-"Δεν μπορείτε να χρησιμοποιήσετε το ReiserFS για κατατμήσεις μικρότερες από "
-"32MB"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "με /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "εξυπηρετητής"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Δεν μπορώ να διαβάσω τον πίνακα κατατμήσεων της συσκευής %s,, είναι πολύ\n"
-"κατεστραμμένος :( Θα προσπαθήσω να συνεχίσω αφαιρώντας τις λανθασμένες \n"
-"κατατμήσεις (ΟΛΑ ΤΑ ΔΕΔΟΜΕΝΑ θα χαθούν!). Η άλλη επιλογή σας είναι να\n"
-"μην επιτρέψετε στο DrakX να αγγίξει τον πίνακα κατατμήσεων. \n"
-"Το σφάλμα είναι: %s\n"
-"\n"
-"Συμφωνείτε να διαγραφούν όλες οι κατατμήσεις;\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Το σημείο σύνδεσης πρέπει να ξεκινάει με /"
-
-#: fsedit.pm:401
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-"Το όνομα του εκτυπωτή πρέπει να περιέχει μόνο γράμματα, αριθμούς και τον "
-"χαρακτήρα underscore"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Υπάρχει ήδη κατάτμηση με σημείο σύνδεσης %s\n"
-
-#: fsedit.pm:404
-#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"\n"
-" Όχι\n"
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "Δεν μπορείτε να χρησιμοποιήσετε μια κατάτμηση LVM για προσάρτηση %s"
-
-#: fsedit.pm:409
-#, fuzzy, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"\n"
-" Όχι\n"
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr ""
-"Αυτός ο κατάλογος πρέπει να παραμείνει στο ριζικό σύστημα αρχείων (root)"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Χρειάζεστε ένα πραγματικό σύστημα αρχείων (ext2/ext3, reiserfs, xfs, or jfs) "
-"για αυτό το σημείο σύνδεσης\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr ""
-"Δεν μπορείτε να χρησιμοποιήσετε κρυπτογραφημένο σύστημα αρχείων για "
-"προσάρτηση %s"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr ""
-"Δεν υπάρχει αρκετός ελεύθερος χώρος για την αυτόματη δημιουργία νέων "
-"κατατμήσεων"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr "Καμία ενέργεια προς εκτέλεση"
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Δισκέτα"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Δίσκος"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "CDROM"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "Συσκευές εγγραφής CD/DVD"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Ταινία"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Κάρτα οθόνης"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "Κάρτα TV"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Άλλα συσκευές Πολυμέσων"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Κάρτα ήχου"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr ""
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Επεξεργαστές"
-
-#: harddrake/data.pm:209
-#, fuzzy, c-format
-msgid "ISDN adapters"
-msgstr "Εσωτερική κάρτα ISDN"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Κάρτα Δικτύου Ethernet"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Μόντεμ"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr ""
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Μνήμη"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "Ελεγκτές AGP"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Εκτυπωτής"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Joystick"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "Ελεγκτές SATA"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "Ελεγκτές RAID"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "ελεγκτές (E)IDE/ATA"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Ελεγκτές Firewire"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "ελεγκτές PCMCIA"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "ελεγκτές SCSI"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "Ελεγκτές USB"
-
-#: harddrake/data.pm:421
-#, fuzzy, c-format
-msgid "USB ports"
-msgstr ", εκτυπωτής USB"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "Ελεγκτές SMBus"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Πληκτρολόγιο"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Ποντίκι"
-
-#: harddrake/data.pm:483
-#, c-format
-msgid "UPS"
-msgstr "UPS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "Σαρωτής"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Άγνωστο/Άλλο"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "επεξεργαστής # "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Παρακαλώ περιμένετε... Εφαρμογή ρυθμίσεων"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr "Κανένας εναλλακτικός οδηγός"
-
-#: harddrake/sound.pm:228
-#, fuzzy, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-"Δεν υπάρχει γνωστός εναλλακτικός οδηγός  OSS/ALSA για την κάρτα ήχου σας (%s)"
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Ρύθμιση ήχου"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Εδώ μπορείτε να επιλέξετε έναν εναλλακτικό οδηγό (OSS ή ALSA) για την κάρτα "
-"ήχου σας (%s)"
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-" εξ' ορισμού"
-
-#: harddrake/sound.pm:243
-#, fuzzy, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"Σύστημα\n"
-" Τι\n"
-"\n"
-" Για Προχωρημένους Linux\n"
-" PCI\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" νέο"
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Οδηγός:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr "Επίλυση προβλημάτων"
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Προσοχή"
-
-#: harddrake/sound.pm:270
-#, fuzzy, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" νέο."
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Κανένας οδηγός ανοιχτού κώδικα"
-
-#: harddrake/sound.pm:279
-#, fuzzy, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Δεν υπάρχει γνωστός εναλλακτικός οδηγός  OSS/ALSA για την κάρτα ήχου σας (%s)"
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Κανένας γνωστός οδηγός"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Δεν υπάρχει κάποιος γνωστός οδηγός για την κάρτα ήχου σας (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Άγνωστος οδηγός"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Σφάλμα: Ο οδηγός \"%s\" της κάρτας ήχου σας δεν υπάρχει στη λίστα"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Επίλυση προβλημάτων Ήχου"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, fuzzy, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" εξ' ορισμού\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ενεργοποίηση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Θα διαλέξω εγώ οδηγό"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Αυτόματη ανίχνευση"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Άγνωστο|Γενικό"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Άγνωστο|CPH05X (bt878) [πολλοί κατασκευαστές]"
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Άγνωστο|CPH06X (bt878) [πολλοί κατασκευαστές]"
-
-#: harddrake/v4l.pm:309
-#, fuzzy, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-"Linux\n"
-" μετά βίας."
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Μοντέλο κάρτας:"
-
-#: harddrake/v4l.pm:313
-#, c-format
-msgid "Tuner type:"
-msgstr ""
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "Ρυθμίσεις PLL:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr "Υποστήριξη ραδιοφώνου:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr "ενεργοποίηση ραδιοφώνου"
-
-#: help.pm:11
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-"\n"
-" Linux\n"
-" Αποδοχή\n"
-"."
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Αποδοχή"
-
-#: help.pm:17
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-"Linux χρήστης χρήστης\n"
-"\n"
-" χρήστης\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" χρήστης\n"
-"\n"
-"\n"
-"\n"
-" χρήστης\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Χρήστης\n"
-" χρήστης\n"
-" εξ' ορισμού\n"
-" χρήστης\n"
-"\n"
-" απλό\n"
-"\n"
-"\n"
-" Αποδοχή χρήστης Προσθήκη χρήστης\n"
-"\n"
-" Επόμενο\n"
-"\n"
-" Για Προχωρημένους εξ' ορισμού\n"
-" χρήστης εξ' ορισμού\n"
-"\n"
-" Πότε χρήστης\n"
-"\n"
-"\n"
-" χρήστης Επόμενο\n"
-" Ολοκληρώθηκε\n"
-"."
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Όνομα χρήστη"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Επόμενο"
-
-#: help.pm:54
-#, fuzzy, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Linux ανιχνεύθηκε\n"
-"\n"
-"\n"
-" Ολοκληρώθηκε\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-" Όνομα\n"
-"\n"
-" Όνομα\n"
-"\n"
-"\n"
-" IDE\n"
-"\n"
-"\n"
-" IDE\n"
-"\n"
-"\n"
-" πρωτεύουσα IDE\n"
-"\n"
-" πρωτεύουσα IDE\n"
-"\n"
-" δευτερεύουσα IDE\n"
-"\n"
-" δευτερεύουσα IDE\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:85
-#, fuzzy, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-"Η εγκατάσταση του Mandriva Linux είναι μοιρασμένο σε αρκετά CD-ROM. Το \n"
-"DrakX ξέρει αν ένα επιλεγμένο πακέτο υπάρχει σε άλλο CD-ROM, θα εξάγει το \n"
-"τρέχον CD και θα ζητήσει να εισάγετε ένα άλλο όταν αυτό θα χρειαστεί."
-
-#: help.pm:92
-#, fuzzy, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-" Σταθμός Εργασίας\n"
-" Ανάπτυξη\n"
-"\n"
-" Σταθμός Εργασίας\n"
-"\n"
-"\n"
-"\n"
-" Ανάπτυξη\n"
-"\n"
-"\n"
-" Εξυπηρετητής εξυπηρετητής\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Μετακίνηση σε εξέλιξη Ομάδα εργασίας:\n"
-" Ομάδα εργασίας:\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εξυπηρετητής\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Αναβάθμιση\n"
-" νέο\n"
-"."
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Σταθμός Εργασίας"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Ανάπτυξη"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr "Γραφικό Περιβάλλον"
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Επιλογή ξεχωριστών πακέτων"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Αναβάθμιση"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Με Χ"
-
-#: help.pm:146
-#, fuzzy, c-format
-msgid "With basic documentation"
-msgstr "Με την βασική τεκμηρίωση (συνιστάται!)"
-
-#: help.pm:146
-#, fuzzy, c-format
-msgid "Truly minimal install"
-msgstr "Ελάχιστη Εγκατάσταση"
-
-#: help.pm:149
-#, fuzzy, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εξυπηρετητής\n"
-" Ομάδα εργασίας:\n"
-"\n"
-" εξ' ορισμού Linux\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-" Όχι Ναι\n"
-"\n"
-" εξ' ορισμού\n"
-"\n"
-" απενεργοποίηση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr ""
-
-#: help.pm:183
-#, fuzzy, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-"Εκτυπωτής Όχι Εκτυπωτής\n"
-"\n"
-" νέο\n"
-"."
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Ρύθμιση"
-
-#: help.pm:189
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εξ' ορισμού\n"
-"\n"
-"\n"
-" εξυπηρετητής\n"
-"\n"
-" εξυπηρετητής\n"
-"!"
-
-#: help.pm:206
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-"Linux\n"
-"\n"
-"\n"
-" HardDrake Linux\n"
-"\n"
-" Τομέας Windows \n"
-"\n"
-"\n"
-" εξυπηρετητής Διαδίκτυο\n"
-" Διαδίκτυο\n"
-" εξυπηρετητής\n"
-" εξυπηρετητής."
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Το ρολόι του υπολογιστή σας είναι ρυθμισμένο σε GMT (ώρα Γκρίνουιτς)"
-
-#: help.pm:217
-#, fuzzy, c-format
-msgid "Automatic time synchronization"
-msgstr "Αυτόματος συγχρονισμός ώρας (χρήση NTP)"
-
-#: help.pm:220
-#, fuzzy, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εξυπηρετητής\n"
-"."
-
-#: help.pm:231
-#, fuzzy, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"Σύστημα Linux\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εξυπηρετητής\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Οθόνη\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ανάλυση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Δοκιμή\n"
-"\n"
-"\n"
-" Ναι\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Επιλογές\n"
-"\n"
-"\n"
-"\n"
-" Όχι εξυπηρετητής\n"
-"."
-
-#: help.pm:288
-#, fuzzy, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-"Οθόνη\n"
-"\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:295
-#, fuzzy, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-"Ανάλυση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:303
-#, fuzzy, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-"\n"
-" εξυπηρετητής\n"
-"."
-
-#: help.pm:308
-#, fuzzy, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-"\n"
-"\n"
-" Όχι\n"
-" εξυπηρετητής\n"
-"."
-
-#: help.pm:316
-#, fuzzy, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-"\n"
-" Linux\n"
-"\n"
-"\n"
-" νέο\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" χρήστης\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" ανιχνεύθηκε\n"
-" Linux\n"
-"\n"
-" εξ' ορισμού\n"
-"\n"
-"\n"
-" Τομέας Windows  Τομέας Windows \n"
-"\n"
-" Linux Διαγραφή\n"
-" Τομέας Windows \n"
-" Τομέας Windows  Αλλαγή μεγέθους\n"
-"\n"
-" Τομέας Windows \n"
-"\n"
-" Linux Τομέας Windows \n"
-"\n"
-"\n"
-" Τομέας Windows \n"
-"\n"
-" Τομέας Windows  νέο\n"
-"\n"
-" Διαγραφή\n"
-" νέο Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Λίστα Αφαίρεσης Τομέας Windows \n"
-" Όλα\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Προσαρμοσμένο\n"
-"\n"
-"\n"
-" Ολοκληρώθηκε\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Χρήση ελεύθερου χώρου"
-
-#: help.pm:374
-#, fuzzy, c-format
-msgid "Use existing partition"
-msgstr "Χρήση υπαρχουσών κατατμήσεων"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Χρήση του ελεύθερου χώρου στην κατάτμηση των Windows"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Διαγραφή ολόκληρου του δίσκου"
-
-#: help.pm:374
-#, fuzzy, c-format
-msgid "Remove Windows"
-msgstr "Αφαίρεση Windows(TM)"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Προσαρμοσμένες κατατμήσεις δίσκου"
-
-#: help.pm:377
-#, fuzzy, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-"Linux\n"
-" Επόμενο\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Για Προχωρημένους\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Επαναφόρτωση\n"
-"\n"
-"\n"
-" Αυτόματο\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Αποθήκευση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-
-#: help.pm:409
-#, fuzzy, c-format
-msgid "Generate auto-install floppy"
-msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Επαναφόρτωση"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Αυτόματο"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Αποθήκευση επιλογής πακέτων"
-
-#: help.pm:412
-#, fuzzy, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Επόμενο\n"
-"\n"
-" Προηγούμενο\n"
-" νέο Linux\n"
-"\n"
-" Για Προχωρημένους\n"
-"."
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Προηγούμενο"
-
-#: help.pm:434
-#, fuzzy, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-"Linux\n"
-"\n"
-"\n"
-" Διαδίκτυο\n"
-" Ναι Διαδίκτυο Όχι\n"
-"\n"
-"\n"
-" Ναι\n"
-"\n"
-" Εγκατάσταση\n"
-" Άκυρο."
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Εγκατάσταση"
-
-#: help.pm:447
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-"επίπεδο\n"
-" επίπεδο\n"
-"\n"
-" Διαδίκτυο επίπεδο\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εξ' ορισμού."
-
-#: help.pm:458
-#, fuzzy, c-format
-msgid "Security Administrator"
-msgstr "Διαχειριστής Ασφαλείας:"
-
-#: help.pm:461
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"\n"
-" Linux\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" IDE\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Άλλα\n"
-"\n"
-" Αποθήκευση\n"
-"\n"
-"\n"
-"\n"
-" Επαναφορά\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" μετά βίας\n"
-"\n"
-"\n"
-"\n"
-" Οδηγός\n"
-"\n"
-"\n"
-"\n"
-" Αναίρεση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Ολοκληρώθηκε\n"
-"\n"
-"\n"
-" Πότε\n"
-"\n"
-"\n"
-"\n"
-" Ολοκληρώθηκε\n"
-"\n"
-" Πότε\n"
-"\n"
-" νέο\n"
-"\n"
-" Διαγραφή\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" HFS\n"
-"\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:530
-#, fuzzy, c-format
-msgid "Removable media auto-mounting"
-msgstr "Αυτόματη σύνδεση αποσπώμενων μονάδων"
-
-#: help.pm:530
-#, fuzzy, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Αλλαγή σε κανονικό τρόπο λειτουργίας"
-
-#: help.pm:533
-#, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Περισσότερες των μία κατατμήσεις Windows βρέθηκαν στον δίσκο σας. Παρακαλώ \n"
-"επιλέξτε ποια θέλετε να συρρικνώσετε για να εγκαταστήσετε το Mandriva "
-"Linux.\n"
-"\n"
-"Κάθε κατάτμηση αναφέρεται ως: \"Όνομα Linux\", \"Όνομα Windows\"\n"
-"\"Χωρητικότητα\".\n"
-"\n"
-"Το όνομα Linux σημαίνει τα εξής: \"Τύπος δίσκου\",\"αριθμός δίσκου\",\n"
-"\"αριθμός κατάτμησης για παράδειγμα, \"hda1\").\n"
-"\n"
-"Ο \"Τύπος δίσκου\" είναι \"hd\" εάν πρόκειται για δίσκο IDE και \"sd\" \n"
-"για SCSI δίσκο.\n"
-"\n"
-"Ο \" αριθμός δίσκου\"είναι πάντα ένα γράμμα μετά το \"hd\" ή \"sd\". Για\n"
-"τους IDE δίσκους: \n"
-"\n"
-"  * \"a\" είναι ο \"master δίσκος στον πρώτο ελεγκτή IDE\",\n"
-"\n"
-" * \"b\" είναι ο \"slave δίσκος στον πρώτο ελεγκτή IDE\",\n"
-"\n"
-" * \"c\" είναι ο \"master δίσκος στον δεύτερο ελεγκτή IDE\",\n"
-"\n"
-" * \"d\" είναι ο \"slave δίσκος στον δεύτερο ελεγκτή IDE\".\n"
-"\n"
-"Για δίσκους SCSI, \"a\" είναι ο πρώτος δίσκος, \"b\" είναι ο δεύτερος "
-"δίσκος\n"
-" κλπ...\n"
-"\n"
-"Το \"Όνομα Windows\" είναι το γράμμα της κατάτμησης όπως φαίνεται από τα\n"
-"Windows (ο πρώτος δίσκος ή κατάτμηση λέγεται \"C:\")."
-
-#: help.pm:564
-#, fuzzy, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-"\"Χώρα\": ελέγξτε την επιλογή χώρας. Αν δεν είστε σε αυτή τη χώρα,\n"
-"κάντε κλικ στο πλήκτρο και επιλέξτε μια άλλη."
-
-#: help.pm:569
-#, fuzzy, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-"ενεργοποίηση τώρα Linux\n"
-"\n"
-"\n"
-" νέο\n"
-" Linux\n"
-"\n"
-" Εγκατάσταση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Αναβάθμιση\n"
-" Linux\n"
-" χρήστης\n"
-"\n"
-"\n"
-" Αναβάθμιση Linux\n"
-" εκτελείται Αναβάθμιση\n"
-" Linux."
-
-#: help.pm:591
-#, fuzzy, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-"εξ' ορισμού\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Άλλα\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:609
-#, fuzzy, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-" Για Προχωρημένους\n"
-"\n"
-"\n"
-" Ισπανία\n"
-" εξ' ορισμού Για Προχωρημένους\n"
-"\n"
-"\n"
-"\n"
-" Επόμενο\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" χρήστης\n"
-" χρήστης."
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr ""
-
-#: help.pm:650
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" σειριακό\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εξ' ορισμού\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Με ροδάκι ανιχνεύθηκε\n"
-"\n"
-"\n"
-" Επόμενο\n"
-" ενεργοποίηση τώρα\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:681
-#, fuzzy, c-format
-msgid "with Wheel emulation"
-msgstr "Προσομοίωση Κουμπιών"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr ""
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Παρακαλώ επιλέξτε την κατάλληλη θύρα. Για παράδειγμα,\n"
-"η\"COM1\"  στα Windows ονομάζεται \"ttyS0\" στο GNU/Linux."
-
-#: help.pm:688
-#, fuzzy, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-"Linux\n"
-" Root\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-" σημαντικό\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εξυπηρετητής Για Προχωρημένους\n"
-"\n"
-" LDAP NIS Τομέας Windows  Τομέας\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Όχι Διαδίκτυο\n"
-"."
-
-#: help.pm:722
-#, fuzzy, c-format
-msgid "authentication"
-msgstr "Πιστοποίηση"
-
-#: help.pm:725
-#, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-
-#: help.pm:742
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Άλλο\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" απλό\n"
-"\n"
-" Linux\n"
-"\n"
-" CUPS Εκτύπωση Σύστημα\n"
-"\n"
-" απλό εξυπηρετητής\n"
-"\n"
-"\n"
-" εξυπηρετητής\n"
-" CUPS\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" εκτελείται\n"
-"."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr ""
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr "CUPS"
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Εξπέρ"
-
-#: help.pm:768
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"IDE\n"
-" PCI\n"
-"\n"
-"\n"
-"\n"
-" PCI Ναι\n"
-" Όχι\n"
-"\n"
-" ανιχνεύθηκε\n"
-" Επόμενο Επόμενο\n"
-"\n"
-"\n"
-" PCI\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:786
-#, fuzzy, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-"ανιχνεύθηκε\n"
-"\n"
-"\n"
-"."
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Κάρτα ήχου"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Ωρολογιακή Ζώνη"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "Κάρτα TV"
-
-#: help.pm:855
-#, fuzzy, c-format
-msgid "ISDN card"
-msgstr "Εσωτερική κάρτα ISDN"
-
-#: help.pm:855
-#, fuzzy, c-format
-msgid "Graphical Interface"
-msgstr "Γραφικό περιβάλλον"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Δίκτυο"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, fuzzy, c-format
-msgid "Proxies"
-msgstr "Προφίλ "
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "Επίπεδο Ασφαλείας"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Τοίχος Προστασίας"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Προγράμματος εκκίνησης"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Υπηρεσίες"
-
-#: help.pm:858
-#, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Επιλέξτε τον δίσκο που θέλετε να διαγράψετε για να εγκαταστήσετε \n"
-"την νέα κατάτμηση Mandriva Linux. ΠΡΟΣΟΧΗ: Όλα τα δεδομένα θα διαγραφούν\n"
-"και θα είναι αδύνατη η επαναφορά τους!"
-
-#: help.pm:863
-#, fuzzy, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-"Κάντε κλικ στο \"Επόμενο ->\" εάν θέλετε να διαγράψετε όλα τα δεδομένα\n"
-"τις κατατμήσεις που βρίσκονται στον σκληρό σας δίσκο. Προσοχή μετά\n"
-"που θα κλικ στο \"Επόμενο ->\"δεν θα μπορείτε να ανακτήσετε τα δεδομένα\n"
-"και τις κατατμήσεις που βρίσκονται στον δίσκο μαζί και τα Windows\n"
-" Επόμενο\n"
-"\n"
-"Κάντε κλικ στο \"<- Προηγούμενο\" για να τερματίσετε τη λειτουργία αυτή\n"
-"χωρίς να χάσετε τα δεδομένα και τις κατατμήσεις σας στο δίσκο."
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Επόμενο ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Προηγούμενο"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"Αδυναμία πρόσβασης των αρθρωμάτων που αντιστοιχούν στον πυρήνα σας (το "
-"αρχείο %s λείπει), γενικά αυτό σημαίνει ότι η δισκέτα εκκίνησης δεν είναι σε "
-"συγχρονισμό με το Μέσο εγκατάστασης ( παρακαλώ δημιουργήστε μια νέα δισκέτα "
-"εκκίνησης)"
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr "Πρέπει επίσης να μορφοποιήσετε το %s"
-
-#: install_any.pm:406
-#, fuzzy, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Έχετε άλλον;"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, fuzzy, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr "Έχετε κάποιον προσαρμογέα %s;"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "CD-ROM"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (http)"
-msgstr "Δίκτυο %s"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (ftp)"
-msgstr "Δίκτυο %s"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr ""
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, c-format
-msgid "No device found"
-msgstr "Δε βρέθηκε συσκευή"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr ""
-
-#: install_any.pm:489
-#, fuzzy, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Αδυναμία fork: %s"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr ""
-
-#: install_any.pm:558
-#, fuzzy, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Δεν βρέθηκε το %s στο %s"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Αλλαγή Cd-Rom!\n"
-"\n"
-"Παρακαλώ εισάγετε το Cd-Rom με όνομα \"%s\" στον οδηγό σας και πατήστε "
-"Εντάξει."
-
-#: install_any.pm:738
-#, fuzzy, c-format
-msgid "Copying in progress"
-msgstr "Ανίχνευση σε εξέλιξη"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Έχετε επιλέξει τους παρακάτω διακομιστές(η): %s\n"
-"\n"
-"\n"
-"Αυτοί οι διακομιστές είναι εξ ορισμού ενεργεί. Δεν έχουν κάποιο γνωστό "
-"πρόβλημα\n"
-"ασφάλειας, αλλά μπορούν να βρεθούν νέα. Σε αυτή την περίπτωση βεβαιωθείτε "
-"ότι\n"
-"έχετε εγκαταστήσει την τελευταία έκδοση το συντομότερο.\n"
-"\n"
-"\n"
-"Είστε βέβαιοι για την εγκατάσταση αυτών των διακομιστών;\n"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"Τα παρακάτω πακέτα θα αφαιρεθούν για να αναβαθμιστεί το σύστημά σας: %s\n"
-"\n"
-"\n"
-"Θέλετε πραγματικά να αφαιρέστε αυτά τα πακέτα;\n"
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Σφάλμα κατά την ανάγνωση του αρχείου %s"
-
-#: install_any.pm:1559
-#, fuzzy, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "Τα παρακάτω πακέτα πρέπει να εγκατασταθούν:\n"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Προκλήθηκε σφάλμα - δεν βρέθηκαν συσκευές στις οποίες να είναι δυνατή η "
-"δημιουργία νέων συστημάτων αρχείων. Παρακαλώ ελέγξτε το υλικό σας για την "
-"αιτία αυτού του προβλήματος"
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr "HTTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, c-format
-msgid "NFS"
-msgstr "NFS"
-
-#: install_any.pm:1666
-#, fuzzy, c-format
-msgid "Please choose a media"
-msgstr "Παρακαλώ επιλέξτε"
-
-#: install_any.pm:1698
-#, fuzzy, c-format
-msgid "Bad media %s"
-msgstr "προστίθεται το μέσο %s"
-
-#: install_any.pm:1710
-#, fuzzy, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Το αρχείο υπάρχει ήδη. Να ξαναγραφεί;"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Αδύνατη η λήψη στιγμιοτύπων πριν από την δημιουργία κατατμήσεων"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Τα στιγμιότυπα θα είναι διαθέσιμα μετά την εγκατάστασης στο %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Εγκατάσταση"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Ρύθμιση συστήματος"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Ένα μέρος του υλικού σας χρειάζεται ``ιδιόκτητους'' οδηγούς για να "
-"λειτουργήσει.\n"
-"Μπορείτε να βρείτε σχετικές πληροφορίες στο: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Πρέπει να έχετε μια βασική κατάτμηση.\n"
-"Δημιουργήστε ή επιλέξτε μια κατάτμηση.\n"
-"Μετά ορίστε ως σημείο σύνδεσης το `/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Δεν έχετε ορίσει κατάτμηση swap\n"
-"\n"
-"Να συνεχίσω;"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Πρέπει να έχετε μια κατάτμηση FAT mounted στο /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Δεν υπάρχει αρκετός ελεύθερος χώρος για δημιουργία νέων κατατμήσεων"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Χρήση υπαρχουσών κατατμήσεων"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Δεν υπάρχουν κατατμήσεις προς χρήση"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Χρήση κατάτμησης Windows για loopback"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Ποια κατάτμηση θέλετε να χρησιμοποιήσετε για το Linux4Win;"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Επιλέξτε τα μεγέθη"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Μέγεθος βασικής κατάτμησης συστήματος σε MB:"
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Μέγεθος κατάτμησης swap σε MB"
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Δεν υπάρχει κατάτμηση FAT για χρήση ως loopback (ή δεν υπάρχει αρκετός χώρος)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Σε τι τύπο κατάτμησης θέλετε να αλλάξετε μέγεθος;"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"Δεν μπορώ να αλλάξω μέγεθος στην κατάτμηση FAT, \n"
-"προκλήθηκε το παρακάτω λάθος: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Υπολογίζεται το μέγεθος της κατάτμησης των Windows"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Η κατάτμηση των Windows είναι πολύ κατακερματισμένη, παρακαλώ τρέξτε πρώτα "
-"το ``defrag'' μέσα από τα Windows και ξεκινήστε ξανά την εγκατάσταση του  "
-"Mandriva Linux "
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, fuzzy, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ΠΡΟΣΟΧΗ!\n"
-"\n"
-"Το DrakX πρέπει τώρα να αλλάξει το μέγεθος της κατάτμησης των Windows.\n"
-"Η διαδικασία αυτή εμπεριέχει κινδύνους. Εάν δεν το έχετε κάνει ήδη,\n"
-"βγείτε από την εγκατάσταση ελέγξετε την κατάτμηση με το \n"
-"scandisk μέσα από τα Windows και κατά περίπτωση την αποκατακερμάτιση \n"
-"(defragment). Μετά ξεκινήστε ξανά την εγκατάσταση.\n"
-"Μετά θα πρέπει να κρατήσετε αντίγραφο ασφαλείας των δεδομένων σας.\n"
-"Εάν είστε σίγουροι, πατήστε Εντάξει."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Τι χώρο θέλετε να κρατήσετε για τα windows στο"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "κατάτμηση %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Γίνεται αλλαγή τις κατάτμησης των Windows"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Αλλαγή μεγέθους FAT απέτυχε: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Δεν υπάρχει κατάμτηση FAT για αλλαγή μεγέθους (ή δεν υπάρχει αρκετός χώρος)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Αφαίρεση Windows(TM)"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr ""
-"Έχετε περισσότερους από έναν δίσκους, σε ποιόν θέλετε να εγκαταστήσετε το "
-"Linux;"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Όλες οι υπάρχουσες κατατμήσεις και τα δεδομένα τους στον δίσκο %s θα χαθούν"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Χρήση fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Μπορείτε τώρα να κατατμήσετε τον δίσκο %s\n"
-"Όταν τελειώσετε, μην ξεχάσετε να αποθηκεύσετε πατώντας `w'"
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Δεν μπορώ να βρω αρκετό χώρο για εγκατάσταση"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ο Οδηγός Κατάτμησης DrakX βρήκε τις παρακάτω λύσεις:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Η κατάτμηση απέτυχε: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Εκκίνηση δικτύου"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Διακοπή λειτουργίας δικτύου"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, fuzzy, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-" Άδεια\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Άδεια\n"
-" Άδεια\n"
-"\n"
-"\n"
-" Άδεια\n"
-" Άδεια Άδεια\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Άδεια\n"
-"\n"
-"\n"
-" Γενικά\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Άδεια Τεκμηρίωση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Θύρα\n"
-"\n"
-" Όλα\n"
-"\n"
-"\n"
-"\n"
-" Linux\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Άδεια Γαλλία\n"
-" Όλα\n"
-" Γαλλία\n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-" Προσοχή\n"
-"\n"
-"\n"
-" Άρνηση\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Άδεια\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Μεταφορά\n"
-"\n"
-"\n"
-"\n"
-" Όλα\n"
-"\n"
-
-#: install_messages.pm:131
-#, fuzzy, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-"Συγχαρητήρια, η εγκατάσταση ολοκληρώθηκε.\n"
-"Αφαιρέστε την δισκέτα ή το CD εκκίνησης και πατήστε return για "
-"επανεκκίνηση.\n"
-"\n"
-"\n"
-"Για πληροφορίες σχετικά με διορθώσεις αυτής της έκδοσης του Mandriva Linux,\n"
-"συμβουλευτείτε την σελίδα: \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Πληροφορίες σχετικά με τις ρυθμίσεις του συστήματός σας υπάρχουν στο "
-"σχετικό\n"
-"κεφάλαιο του επίσημου οδηγού χρήσης του Mandriva Linux."
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Διπλό σημείο σύνδεσης %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Μερικά σημαντικά πακέτα δεν εγκαταστάθηκαν σωστά.\n"
-"Ο οδηγός CD-ROM ή το CD-ROM είναι ελαττωματικό.\n"
-"Ελέγξτε το CD-ROM σε ένα άλλο σύστημα χρησιμοποιώντας την εντολή \"rpm -qpl "
-"media/main/*.rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Βήμα `%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Επιλογή Ομάδων Πακέτων"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Συνολικό μέγεθος: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Λάθος πακέτο"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Έκδοση: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Μέγεθος: "
-
-#: install_steps_gtk.pm:297
-#, fuzzy, c-format
-msgid "%d KB\n"
-msgstr "Μέγεθος: %d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Σπουδαιότητα: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Δεν μπορείτε να επιλέξετε/αποεπιλέξετε αυτό το πακέτο"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "λόγω ελλείψεων %s"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "λόγω μη ικανοποίησης %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "προσπάθεια ενίσχυσης του %s"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "για να κρατηθεί το %s"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"Δεν μπορείτε να επιλέξετε αυτό το πακέτο διότι δεν υπάρχει αρκετός χώρος"
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "Θα εγκατασταθούν τα παρακάτω πακέτα"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "Θα αφαιρεθούν τα παρακάτω πακέτα "
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Αυτό είναι απαιτούμενο πακέτο, δεν μπορεί να αποεπιλεγεί"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Δεν μπορείτε να αποεπιλέξετε αυτό το πακέτο. Είναι ήδη εγκατεστημένο"
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Αυτό το πακέτο πρέπει να αναβαθμιστεί\n"
-"Είστε σίγουρος ότι θέλετε να το αποεπιλέξετε;"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Δεν μπορείτε να αποεπιλέξετε αυτό το πακέτο. Πρέπει να αναβαθμιστεί"
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Αυτόματη προβολή επιλεγμένων πακέτων"
-
-#: install_steps_gtk.pm:389
-#, fuzzy, c-format
-msgid "Load/Save selection"
-msgstr "Αποθήκευση επιλογής"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Ανανέωση επιλεγμένων πακέτων"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Ελάχιστη Εγκατάσταση"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Επιλέξτε τα πακέτα που θέλετε να εγκαταστήσετε"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Εγκατάσταση"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Εκτίμηση"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Χωρίς λεπτομέρειες"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Εναπομένων χρόνος "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Παρακαλώ περιμένετε, προετοιμασία εγκατάστασης..."
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d πακέτα"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Εγκατάσταση πακέτου %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Άρνηση"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, fuzzy, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Αλλαγή Cd-Rom!\n"
-"\n"
-"Παρακαλώ εισάγετε το Cd-Rom με όνομα \"%s\" στον οδηγό σας και πατήστε "
-"Εντάξει.\n"
-"Εάν δεν το έχετε, πατήστε Ακύρωση για αποφυγή εγκατάστασης από αυτό το CdRom."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Προκλήθηκε σφάλμα κατά την ταξινόμηση των πακέτων:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Να συνεχίσω;"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Προκλήθηκε σφάλμα κατά την εγκατάσταση των πακέτων:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "δεν ρυθμίστηκε"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Άδεια χρήσης"
-
-#: install_steps_interactive.pm:89
-#, fuzzy, c-format
-msgid "Release Notes"
-msgstr "Έκδοση:"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Παρακαλώ επιλέξτε την διάταξη πληκτρολογίου."
-
-#: install_steps_interactive.pm:121
-#, fuzzy, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Αυτή είναι η πλήρης λίστα των διαθέσιμων χωρών"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Εγκατάσταση/Αναβάθμιση"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Πρόκειται για εγκατάσταση ή για αναβάθμιση;"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Αναβάθμιση %s"
-
-#: install_steps_interactive.pm:168
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Κλειδί κρυπτογράφησης"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Παρακαλώ επιλέξτε τύπο ποντικιού."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Θύρα ποντικιού"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr ""
-"Παρακαλώ επιλέξτε σειριακή θύρα στην οποία είναι συνδεδεμένο το ποντίκι σας."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr "Προσομοίωση Κουμπιών"
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "Προσομοίωση 2 Κουμπιών"
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr "Προσομοίωση 3 Κουμπιών"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Ρύθμιση καρτών PCMCIA ..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Ρύθμιση IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "δεν υπάρχουν διαθέσιμες κατατμήσεις"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Ανάλυση κατατμήσεων για προσδιορισμό σημείων σύνδεσης."
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Επιλέξτε σημεία σύνδεσης"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Δεν υπάρχει ελεύθερος χώρος για 1MB bootstrap! Η εγκατάσταση θα συνεχιστεί, "
-"αλλά για να ξεκινήσετε το σύστημά σας, θα χρειαστεί να δημιουργήσετε μια "
-"κατάτμηση bootstrap με το DiskDrake"
-
-#: install_steps_interactive.pm:317
-#, fuzzy, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Δεν υπάρχει ελεύθερος χώρος για 1MB bootstrap! Η εγκατάσταση θα συνεχιστεί, "
-"αλλά για να ξεκινήσετε το σύστημά σας, θα χρειαστεί να δημιουργήσετε μια "
-"κατάτμηση bootstrap με το DiskDrake"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Επιλέξτε κατατμήσεις προς μορφοποίηση"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Έλεγχος για χαλασμένα τμήματα;"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Απέτυχε ο έλεγχος του συστήματος αρχείων %s. Θέλετε να επισκευάσετε τα "
-"σφάλματα; (προσοχή, μπορεί να  χάσετε δεδομένα)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr ""
-"Δεν υπάρχει αρκετός χώρος swap για την ολοκλήρωση της εγκατάστασης, παρακαλώ "
-"προσθέστε"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Ψάχνω για διαθέσιμα πακέτα και δημιουργώ ξανά τη βάση δεδομένων rpm..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Ψάχνω για διαθέσιμα πακέτα..."
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Ψάχνω για ήδη εγκατεστημένα πακέτα..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Αναζήτηση πακέτων προς αναβάθμιση..."
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Επιλέξτε τόπο από τον οποίο θα γίνει η λήψη πακέτων"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Δεν επέμεινε αρκετός χώρος στο σύστημά σας για εγκατάσταση ή αναβάθμιση (%d "
-"> %d)"
-
-#: install_steps_interactive.pm:495
-#, fuzzy, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Παρακαλώ επιλέξτε τη φόρτωση ή αποθήκευση των επιλογής πακέτων στη δισκέτα.\n"
-"Η μορφοποίηση είναι η ίδια με τις δισκέτες αυτόματης εγκατάστασης."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Φόρτος"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Αποθήκευση"
-
-#: install_steps_interactive.pm:505
-#, fuzzy, c-format
-msgid "Bad file"
-msgstr "Φόρτωση αρχείου"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Το επιλεγμένο μέγεθος είναι μεγαλύτερο από το διαθέσιμο χώρο"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Τύπος εγκατάστασης"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Δεν έχετε επιλέξει ομάδα πακέτων.\n"
-"Παρακαλώ επιλέξτε την ελάχιστη εγκατάσταση που θέλετε:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Με την βασική τεκμηρίωση (συνιστάται!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Πραγματικά ελάχιστη εγκατάσταση (ειδικά χωρίς urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Όλα"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Εάν έχετε όλα τα παρακάτω CDs, πατήστε Εντάξει.\n"
-"Εάν δεν έχετε κανένα από τα παρακάτω CDs, πατήστε Ακύρωση.\n"
-"Εάν δεν έχετε κάποια από αυτά, αποεπιλέξτε τα και πατήστε Εντάξει."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom ονόματι \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Προετοιμασία εγκατάστασης"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Εγκατάσταση πακέτου %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Ρυθμίσεις μετά την εγκατάσταση"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"Τώρα έχετε τη δυνατότητα να εγκαταστήσετε πακέτα αναβάθμισης. Αυτά τα\n"
-"πακέτα έχουν αναβαθμιστεί μετά την έκδοση της διανομής. Μπορεί να περιέχουν\n"
-"διορθώσεις σφαλμάτων ή αναβαθμίσεις ασφάλειας.\n"
-"\n"
-"Για να κάνετε λήψη αυτών των πακέτων πρέπει να έχετε μια σύνδεση στο "
-"Διαδίκτυο\n"
-"που να λειτουργεί.\n"
-"\n"
-"Θέλετε να εγκαταστήσετε τις αναβαθμίσεις ;"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Σύνδεση με τον τόπο για την λήψη των διαθέσιμων πακέτων..."
-
-#: install_steps_interactive.pm:844
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Αδυναμία fork: %s"
-
-#: install_steps_interactive.pm:844
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Θα θέλατε να ρυθμίσετε έναν εκτυπωτή;"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Ποια είναι η ζώνη ώρας;"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Αυτόματος συγχρονισμός ώρας (χρήση NTP)"
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "Εξυπηρετητής NTP"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Περίληψη"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Σύστημα"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Υλικό"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Απομακρυσμένος εξυπηρετητής CUPS"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Κανένας εκτυπωτής"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Έχετε κάρτα ήχου ISA;"
-
-#: install_steps_interactive.pm:1028
-#, fuzzy, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr ""
-"Εκτελέστε  \"sndconfig\" μετά την εγκατάσταση για την ρύθμιση της κάρτας"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
-"Δεν βρέθηκε κάρτα ήχου. Δοκιμάστε το \"harddrake\" μετά την εγκατάσταση"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Γραφικό περιβάλλον"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Δίκτυο & Διαδίκτυο"
-
-#: install_steps_interactive.pm:1073
-#, fuzzy, c-format
-msgid "configured"
-msgstr "επαναρύθμιση"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Ασφάλεια"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "ενεργοποιημένο"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "απενεργοποιημένο"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Εκκίνηση"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s σε %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Υπηρεσίες: %d ενεργοποιημένες για %d εγγεγραμμένες"
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Δεν έχετε ρυθμίσει το Χ. Είστε βέβαιοι ότι θέλετε να το κάνετε;"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Προετοιμασία προγράμματος εκκίνησης..."
-
-#: install_steps_interactive.pm:1230
-#, fuzzy, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Φαίνεται πως έχετε ένα Αρχαίο ή Άγνωστο\n"
-"μηχάνημα, ο yaboot bootloader δεν θα δουλέψει για σας.\n"
-"Η εγκατάσταση θα συνεχιστεί, αλλά\n"
-"θα χρειαστεί να χρησιμοποιήσετε το BootX για να ξεκινήσετε το μηχάνημά σας"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Θέλετε να χρησιμοποιήσετε το aboot;"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Σφάλμα κατά την εγκατάσταση του aboot, \n"
-"προσπάθεια βεβιασμένης εγκατάστασης, ακόμα και αν αυτό έχει σαν αποτέλεσμα "
-"την καταστροφή της πρώτης κατάτμησης;"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Εισάγετε άδεια δισκέτα στον οδηγό %s"
-
-#: install_steps_interactive.pm:1294
-#, fuzzy, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Παρακαλώ εισάγετε τη δισκέτα Εκκίνησης στον οδηγό %s"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης..."
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Μερικά βήματα δεν ολοκληρώθηκαν.\n"
-"\n"
-"Θέλετε σίγουρα να εγκαταλείψετε τώρα;"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"Η αυτόματη εγκατάσταση μπορεί να είναι πλήρως αυτόματη,\n"
-"σε αυτήν την περίπτωση θα αναλάβει το σκληρό δίσκο!!\n"
-"(αυτό αναφέρεται για περιπτώσεις εγκατάστασης σε άλλο υπολογιστή).\n"
-"\n"
-"Μπορεί να προτιμάτε να επαναλάβετε την εγκατάσταση.\n"
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> Αλλαγή πεδίου  | <Space> επιλογή | <F12> επόμενη οθόνη"
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Επιλέξτε ένα αρχείο"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Προσθήκη"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Τροποποίηση"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Αφαίρεσης"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Βασική"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Τέλος"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Κάντο"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Κακή επιλογή, ξαναδοκιμάστε\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Η επιλογή σας; (εξ ορισμού %s)"
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Πεδία που θα πρέπει να συμπληρώσετε:\n"
-"%s"
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Η επιλογή σας; (0/1, εξ ορισμού %s)"
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Πλήκτρο `%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Θέλετε να κάνετε κλικ σε αυτό το κουμπί;"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Η επιλογή σας; (εξ ορισμού `%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr "εισάγετε την λέξη `void' για κενή εισαγωγή"
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Υπάρχουν πολλά πράγματα από τα οποία μπορείτε να επιλέξετε (%s).\n"
-
-#: interactive/stdio.pm:125
-#, fuzzy, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"επεξεργασία\n"
-"\n"
-" "
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Σημ.:μια ετικέτα άλλαξε:\n"
-"%s"
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr "Εισάγετε ξανά"
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Τσέχικο (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Γερμανικό"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Ισπανικό"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Φινλανδικό"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Γαλλικό"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Νορβηγικό"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Πολωνικό"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Ρωσικό"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Σουηδικό"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "Μεγάλη Βρετανία (UK)"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "Η.Π.Α. (US)"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Αλβανικό"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Αρμενικό (παλιό)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Αρμενικό (γραφομηχανή)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Αρμενικό (φωνητικό)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "Αραβικό"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Αζερμπαϊτζάν (Λατινικό)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Βελγικό"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Βεγγαλικό (Inscript διάταξη)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Βεγγαλικό (Probhat διάταξη)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Βουλγαρικό (φωνητικό)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Βουλγαρικό (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Βραζιλιάνικο (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Βοσνίας"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Λευκορωσίας"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Ελβετικό (Γερμανική διάταξη)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Ελβετικό (Γαλλική διάταξη)"
-
-#: keyboard.pm:204
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "Αραβικό"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Τσέχικο (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Γερμανικό (χωρίς νεκρά πλήκτρα)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "Δεβαναγαρικό"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Δανικό"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak (ΗΠΑ)"
-
-#: keyboard.pm:213
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak (Νορβηγικό)"
-
-#: keyboard.pm:215
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak (Νορβηγικό)"
-
-#: keyboard.pm:217
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak (ΗΠΑ)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak (Νορβηγικό)"
-
-#: keyboard.pm:220
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak (Σουηδικό)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak (Σουηδικό)"
-
-#: keyboard.pm:222
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Βοσνίας"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Εσθονικό"
-
-#: keyboard.pm:227
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Ελληνικό"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Γεωργία (\"Ρώσικη\" διάταξη)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Γεωργία (\"Λατινική\" διάταξη)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Ελληνικό"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr ""
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "Γκουτζαρατικό"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "Γκουρμούκι"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Κροατικό"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Ουγγρικό"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr ""
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Ισραήλ"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Ισραήλ (φωνητικό)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Ιρανικό"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Ισλανδικό"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Ιταλικό"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr ""
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Ιαπωνικό 106 πλήκτρων"
-
-#: keyboard.pm:249
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Καναδάς"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Κορεάτικο Πληκτρολόγιο"
-
-#: keyboard.pm:254
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "Αραβικό"
-
-#: keyboard.pm:255
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Μεγάλη Βρετανία (UK)"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Λατινικής Αμερικής"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr ""
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Λιθουανικό AZERTY (παλιό)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Λιθουανικό AZERTY (νέο)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Λιθουανικό \"number row\" QWERTY"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Λιθουανικό \"φωνητικό\" QWERTY"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Λετονικό"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Μαλαγιαλαμικό"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Μακεδονικό Π.Γ Δ."
-
-#: keyboard.pm:267
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Μιανμάρ"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Μογγολικό (Κυριλλική)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr ""
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr ""
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Ολλανδικό"
-
-#: keyboard.pm:273
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Συρία"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Πολωνικό (διάταξη qwerty)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Πολωνικό (διάταξη qwertz)"
-
-#: keyboard.pm:277
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Πολωνικό"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Πορτογαλικό"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Καναδικό (Κεμπέκ)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Ρουμανικό (qwertz)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Ρουμανικό (qwerty)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Ρωσικό (φωνητικό)"
-
-#: keyboard.pm:286
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Dvorak (Νορβηγικό)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr ""
-
-#: keyboard.pm:289
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Ταϊλανδέζικο"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Σλοβενίας"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Σλοβακίας (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Σλοβακίας (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Σέρβικο (κυριλλικό)"
-
-#: keyboard.pm:298
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Συρία"
-
-#: keyboard.pm:299
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Αρμενικό (φωνητικό)"
-
-#: keyboard.pm:300
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Τοκελάου"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Ταμιλικό (διάταξη ISCII)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Ταμιλικό (διάταξη γραφομηχανή)"
-
-#: keyboard.pm:304
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Ταϊλανδέζικο"
-
-#: keyboard.pm:305
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Ταϊλανδέζικο"
-
-#: keyboard.pm:307
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Ταϊλανδέζικο"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr ""
-
-#: keyboard.pm:315
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Γερμανικό"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Τουρκικό (παραδοσιακό \"F\" μοντέλο)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Τουρκικό (μοντέρνο \"Q\" μοντέλο)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ουκρανικό"
-
-#: keyboard.pm:322
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Συρία"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US διεθνές"
-
-#: keyboard.pm:325
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Σέρβικο (κυριλλικό)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Βιετνάμ \"numeric row\" QWERTY"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Γιουγκοσλαβικό (λατινικό)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr "Δεξιό πλήκτρο Alt"
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Ταυτόχρονα τα δύο πλήκτρα Shift"
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Ταυτόχρονα τα πλήκτρα Control και Shift"
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr "Πλήκτρο Capslock"
-
-#: keyboard.pm:339
-#, fuzzy, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr "Ταυτόχρονα τα πλήκτρα Ctrl και Alt"
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ταυτόχρονα τα πλήκτρα Ctrl και Alt"
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Ταυτόχρονα τα πλήκτρα Alt και Shift"
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Πλήκτρο \"Μενού\""
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Αριστερό πλήκτρο \"Windows\""
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Δεξιό πλήκτρο \"Windows\""
-
-#: keyboard.pm:345
-#, fuzzy, c-format
-msgid "Both Control keys simultaneously"
-msgstr "Ταυτόχρονα τα δύο πλήκτρα Shift"
-
-#: keyboard.pm:346
-#, fuzzy, c-format
-msgid "Both Alt keys simultaneously"
-msgstr "Ταυτόχρονα τα δύο πλήκτρα Shift"
-
-#: keyboard.pm:347
-#, fuzzy, c-format
-msgid "Left Shift key"
-msgstr "Αριστερό πλήκτρο \"Windows\""
-
-#: keyboard.pm:348
-#, fuzzy, c-format
-msgid "Right Shift key"
-msgstr "Δεξιό πλήκτρο Alt"
-
-#: keyboard.pm:349
-#, fuzzy, c-format
-msgid "Left Alt key"
-msgstr "Δεξιό πλήκτρο Alt"
-
-#: keyboard.pm:350
-#, fuzzy, c-format
-msgid "Left Control key"
-msgstr "Απομακρυσμένος Έλεγχος"
-
-#: keyboard.pm:351
-#, fuzzy, c-format
-msgid "Right Control key"
-msgstr "Δεξιό πλήκτρο Alt"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Εδώ μπορείτε να επιλέξετε το πλήκτρο ή τον συνδυασμό\n"
-"πλήκτρων εναλλαγής των διατάξεων πληκτρολογίων\n"
-"(π.χ. Αγγλική ή Ελληνική)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Ανδόρα"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Ηνωμένα Αραβικά Εμιράτα"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Αφγανιστάν"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Αντίγκουα και Μπαρμπούντα"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Αγκίλα"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Αλβανία"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Αρμενία"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Ολλανδικές Αντίλλες"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Αγκόλα"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Ανταρκτική"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Αργεντινή"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Αμερικανική Σαμόα"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Αρούμπα"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Αζερμπαϊτζάν"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Βοσνία-Ερζεγοβίνη"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Μπαρμπάντος"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Μπανγκλαντές"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Μπουρκίνα Φάσο"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Βουλγαρία"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Μπαχρέιν"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Μπουρούντι"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Μπενίν"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Βερμούδες"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Μπρουνέι Νταρουσαλάμ"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Βολιβία"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Μπαχάμες"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Μπουτάν"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Νήσος Μπουβέ"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Μποτσουάνα"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Λευκορωσία"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Μπελίζ"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Νήσοι Κόκος (Κήλινγκ)"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Δημοκρατία Κεντρικής Αφρικής"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr ""
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Ακτή Ελεφαντοστού"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Νήσοι Κουκ"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Χιλή"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Καμερούν"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Κίνα"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Κολομβία"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Σερβία & Μαυροβούνιο"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Κούβα"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Πράσινο Ακρωτήριο"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Νήσοι Χριστουγέννων"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Κύπρος"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Τζιμπουτί"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Ντομίνικα"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Δομινικανή Δημοκρατία"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Αλγερία"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ισημερινός"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Αίγυπτος"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Δυτική Σαχάρα"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Ερυθραία"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Αιθιοπία"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Φίτζι"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Νήσοι Φώκλαντ (Μαλβίνες)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Μικρονησία"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Νήσοι Φερόες"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Γκαμπόν"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Ηνωμένο Βασίλειο"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Γρενάδα"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Γεωργία"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Γαλλική Γουιάνα"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Γκάνα"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Γιβραλτάρ"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Γροιλανδία"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Γκάμπια"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Γουινέα"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Γουαδελούπη"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ισημερινή Γουϊνέα"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Νότια Γεωργία και Νότια Νησιά Σάντουιτς"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Γουατεμάλα"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Γκουάμ"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Γουϊνέα-Μπισάου"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Γουιάνα"
-
-#: lang.pm:286
-#, fuzzy, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Χονγκ Κονγκ"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Νησί Χερντ και Νήσοι ΜακΝτόναλντ"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Ονδούρα"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Κροατία"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Αϊτή"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Ινδονησία"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Ινδία"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Βρετανικά Εδάφη Ινδικού Ωκεανού"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Ιράκ"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Ιράν"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Ισλανδία"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Τζαμάικα"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Ιορδανία"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Κένυα"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Κιργιστάν"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Καμπότζη"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Κιριμπάτι"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Κομόρες"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Σαιντ Κιτς και Νέβις"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Κορέα (Βόρεια)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Κορέα"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Κουβέιτ"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Νήσοι Κέυμαν"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Καζακστάν"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Λάος"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Λίβανος"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Άγιος Λουκάς"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Λιχτενστάιν"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Σρι Λάνκα"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Λιβερία"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Λεσότο"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Λιθουανία"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Λουξεμβούργο"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Λεττονία"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Λιβύη"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Μαρόκο"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Μονακό"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Μολδαβία"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Μαδαγασκάρη"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Νήσοι Μάρσαλ"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Πρώην Γιουγκοσλαβική Δημοκρατία της Μακεδονίας"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Μάλι"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Μιανμάρ"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Μογγολία"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Νήσοι Βορείων Μαριάννων"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Μαρτινίκα"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Μαυριτανία"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Μονσεράτ"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Μάλτα"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Μαυρίκιος"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Μαλδίβες"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Μαλάουι"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Μεξικό"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Μαλαισία"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Μοζαμβίκη"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Ναμίμπια"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Νέα Καληδονία"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Νίγηρας"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Νήσοι Νόρφολκ"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Νιγηρία"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Νικαράγουα"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Νεπάλ"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Ναούρου"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Νίουε"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Ομάν"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Παναμάς"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Περού"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Γαλλική Πολυνησία"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Παπούα-Νέα Γουϊνέα"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Φιλιππίνες"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Πακιστάν"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Σαιντ Πιερ και Μικελόν"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Νήσοι Πίτκαιρν"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Πουέρτο Ρίκο"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Παλαιστίνη"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Παραγουάη"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Παλάου"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Κατάρ"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Ρεουνιόν"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Ρουμανία"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Ρουάντα"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Σαουδική Αραβία"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Νήσοι Σολομώντος"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Σεϋχέλλες"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Σουδάν"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Σιγγαπούρη"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Νήσος Αγίας Ελένης"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Σλοβενία"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Νήσοι Σβάλμπαρντ και Γιαν Μάγιεν"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Σιέρρα Λεόνε"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "Άγιος Μαρίνος"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Σενεγάλη"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Σομαλία"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Σουρινάμ"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Σάο Τόμε και Πρίντσιπε"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "Ελ Σαλβαδόρ"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Συρία"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Σουαζιλάνδη"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Νήσοι Τούρκς και Καΐκος"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Τσαντ"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "Γαλλικές Νότιες Περιοχές"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Τόγκο"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Τατζικιστάν"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Τοκελάου"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Ανατολικό Τιμόρ"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Τουρκμενιστάν"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Τυνησία"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Τόγκα"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Τουρκία"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Τρινιντάντ και Τομπάγκο"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Τουβαλού"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Τανζανία"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ουκρανία"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Ουγκάντα"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Μικρά απομονωμένα νησιά Ηνωμένων Πολιτειών"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Ουρουγουάη"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Ουζμπεκιστάν"
-
-#: lang.pm:419
-#, fuzzy, c-format
-msgid "Vatican"
-msgstr "Λετονικό"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Άγιος Βικέντιος και Γρεναντίνες"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Βενεζουέλα"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Παρθένοι Νήσοι(Βρετανικές)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Παρθένοι Νήσοι(Αμερικανικές)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Βιετνάμ"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Βανουάτου"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "Νήσοι Γουάλις και Φουτούνα"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Σαμόα"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Υεμένη"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "Μαγιότ"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Ζάμπια"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Ζιμπάμπουε"
-
-#: lang.pm:1073
-#, fuzzy, c-format
-msgid "You should install the following packages: %s"
-msgstr "Εγκατάσταση πακέτου %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Καλώς ορίσατε στο %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Κυκλικές συνδέσεις %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Αφαιρέστε πρώτα τις λογικές μονάδες\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Παράμετροι"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr ""
-
-#: modules/interactive.pm:22
-#, fuzzy, c-format
-msgid "Module configuration"
-msgstr "Χειροκίνητη ρύθμιση"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Εδώ μπορείτε να ρυθμίσετε τις παραμέτρους του αρθρώματος."
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Βρέθηκαν %s προσαρμογείς"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Έχετε άλλον;"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Έχετε κάποιον προσαρμογέα %s;"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Προβολή πληροφοριών υλικού"
-
-#: modules/interactive.pm:82
-#, fuzzy, c-format
-msgid "Installing driver for USB controller"
-msgstr "Εγκατάσταση οδηγού για %s κάρτα %s"
-
-#: modules/interactive.pm:83
-#, fuzzy, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Εγκατάσταση οδηγού για %s κάρτα %s"
-
-#: modules/interactive.pm:84
-#, fuzzy, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Εγκατάσταση οδηγού για %s κάρτα %s"
-
-#: modules/interactive.pm:85
-#, fuzzy, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Εγκατάσταση οδηγού για %s κάρτα %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Εγκατάσταση οδηγού για %s κάρτα %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(άρθρωμα %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-"Μπορείτε τώρα να δώσετε τις παραμέτρους για το άρθρωμα %s.\n"
-"Σημειώστε ότι κάθε διεύθυνση πρέπει να εισάγεται με το πρόθεμα  0x όπως "
-"'0x123'"
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Μπορείτε τώρα να δώσετε τις παραμέτρους για το άρθρωμα %s.\n"
-"Οι παράμετροι έχουν την μορφή ``όνομα=τιμή όνομα2=τιμή2 ...''.\n"
-"Για παράδειγμα, ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Επιλογές αρθρώματος:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Ποιόν οδηγό %s να δοκιμάσω;"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Σε μερικές περιπτώσεις, ο οδηγός %s χρειάζεται επιπλέον παραμέτρους για\n"
-"να λειτουργήσει σωστά, παρ' όλο που συνήθως λειτουργεί και χωρίς αυτές.\n"
-"Θα θέλατε να δώσετε επιπλέον επιλογές ή να αφήσετε τον οδηγό να εξετάσει\n"
-"το υλικό σας για τις παραμέτρους που χρειάζεται; Η εξέταση αυτή ίσως\n"
-"προκαλέσει πάγωμα του συστήματος, αλλά δεν θα προκαλέσει βλάβη."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Αυτόματη εξέταση"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Προσδιορισμός παραμέτρων"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Η φόρτωση του αρθρώματος %s απέτυχε.\n"
-"Θέλετε να δοκιμάσετε ξανά με διαφορετικές παραμέτρους;"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "ένας αριθμός"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d αριθμοί χωρισμένοι με κόμμα"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr "αριθμοί χωρισμένοι με κόμμα"
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr ""
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Τυπικό"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Γενικού τύπου ποντίκι PS2 με ροδάκι"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Αυτόματο"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 πλήκτρου"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Γενικού τύπου με 2 πλήκτρα"
-
-#: mouse.pm:50 mouse.pm:59
-#, fuzzy, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Γενικού τύπου με 3 πλήκτρα"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Με ροδάκι"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "σειριακό"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Γενικού τύπου με 3 πλήκτρα"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:62
-#, fuzzy, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:66
-#, fuzzy, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Series"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (σειριακό, παλιός C7 τύπος)"
-
-#: mouse.pm:72
-#, fuzzy, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Mouse (σειριακό, παλιός C7 τύπος)"
-
-#: mouse.pm:74
-#, fuzzy, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "busmouse"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "Δύο πλήκτρων"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "Τριών πλήκτρων"
-
-#: mouse.pm:82
-#, fuzzy, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr "Προσομοίωση Κουμπιών"
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Γενικό"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr ""
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Microsoft Explorer"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "κανένα"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Χωρίς ποντίκι"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr ""
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Παρακαλώ δοκιμάστε το ποντίκι"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Για ενεργοποίηση ποντικιού"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "ΚΙΝΗΣΤΕ ΤΟ ΡΟΔΑΚΙ!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "χρήση PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "χρήση PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "χρήση DHCP"
-
-#: network/adsl.pm:22
-#, fuzzy, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Alcatel speedtouch usb"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, fuzzy, c-format
-msgid " - detected"
-msgstr "ανιχνεύθηκε"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr "Sagem (με χρήση του PPPoA) USB"
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr "Sagem (με χρήση του DHCP) USB"
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Σύνδεση στο Διαδίκτυο"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"Ο πιο κοινός τρόπος σύνδεσης adsl είναι pppoe.\n"
-"Ορισμένες συνδέσεις χρησιμοποιούν PPTP, κάποιες λίγες DHCP.\n"
-"Εάν δεν ξέρετε, επιλέξτε 'χρήση PPPoE'"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, fuzzy, c-format
-msgid "ADSL connection type:"
-msgstr "Σύνδεση ADSL"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Εξυπηρετητής Ιστοσελίδων"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Εξυπηρετητής Όνομα Τομέα"
-
-#: network/drakfirewall.pm:22
-#, fuzzy, c-format
-msgid "SSH server"
-msgstr "Εξυπηρετητής SSH"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "Διακομιστής FTP"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Εξυπηρετητής Ταχυδρομείου"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "Εξυπηρετητής POP και IMAP"
-
-#: network/drakfirewall.pm:42
-#, fuzzy, c-format
-msgid "Telnet server"
-msgstr "εξυπηρετητής X"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, fuzzy, c-format
-msgid "CUPS server"
-msgstr "Εξυπηρετητής DNS"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr "Echo request (ping)"
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr ""
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-"ρύθμιση tinyfirewall\n"
-"\n"
-"Αυτό ρυθμίζει το προσωπικό σας firewall για αυτό το μηχάνημα Mandriva "
-"Linux.\n"
-"Για μια ισχυρή αφοσιωμένη λύση firewall, παρακαλώ κοιτάξτε στην\n"
-"ειδικευμένη Mandriva Security Firewall διανομή."
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"Ρυθμιστής drakfirewall\n"
-"\n"
-"Βεβαιωθείτε ότι έχετε ρυθμίσει το Δίκτυο/Πρόσβαση Διαδικτύου με τη χρήση του "
-"drakconnect πριν προχωρήσετε."
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "Ποιες υπηρεσίες θέλετε να επιτρέπονται να συνδέονται στο Διαδίκτυο;"
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Μπορείτε να εισάγετε διάφορες θήρες.\n"
-"Έγκυρα παραδείγματα είναι: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Δείτε το /etc/services για πληροφορίες."
-
-#: network/drakfirewall.pm:188
-#, fuzzy, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-"Δόθηκε άκυρη θήρα: %s.\n"
-"Το σωστό φορμά είναι \"θύρα/tcp\" ή \"θύρα/udp\", \n"
-"όπου θήρα είναι είναι αριθμός  μεταξύ 1 και 65535."
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr "Όλες (χωρίς τοίχος προστασίας)"
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Άλλες θύρες"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Δεν ξέρω"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Χειρωνακτική"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, fuzzy, c-format
-msgid "Manual choice"
-msgstr "χειροκίνητα"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Εσωτερική κάρτα ISDN"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, c-format
-msgid "Manual configuration"
-msgstr "Χειροκίνητη ρύθμιση"
-
-#: network/netconnect.pm:105
-#, fuzzy, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Αυτόματο IP"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr ""
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Πρωτόκολλο υπόλοιπου κόσμου"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Ευρωπαϊκό Πρωτόκολλο (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Πρωτόκολλο υπόλοιπου κόσμου\n"
-" χωρίς D-Channel (μισθωμένες γραμμές)"
-
-#: network/netconnect.pm:153
-#, fuzzy, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Alcatel speedtouch usb"
-
-#: network/netconnect.pm:154
-#, fuzzy, c-format
-msgid "Sagem USB modem"
-msgstr "Κατάσταση συστήματος"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr ""
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr ""
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:161
-#, fuzzy, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Χειροκίνητη ρύθμιση"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr ""
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr ""
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr ""
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, fuzzy, c-format
-msgid "Bridged Ethernet LLC"
-msgstr "Κάρτα Ethernet"
-
-#: network/netconnect.pm:170
-#, fuzzy, c-format
-msgid "Bridged Ethernet VC"
-msgstr "Κάρτα Ethernet"
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr ""
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr ""
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr ""
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr ""
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Χρήση script"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Χρήση τερματικού"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, fuzzy, c-format
-msgid "Network & Internet Configuration"
-msgstr "Ρυθμίσεις δικτύου"
-
-#: network/netconnect.pm:300
-#, fuzzy, c-format
-msgid "(detected on port %s)"
-msgstr "ανιχνεύθηκε στην πόρτα %s"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, fuzzy, c-format
-msgid "(detected %s)"
-msgstr "ανιχνεύθηκε το %s"
-
-#: network/netconnect.pm:302
-#, fuzzy, c-format
-msgid "(detected)"
-msgstr "ανιχνεύθηκε"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "Σύνδεση LAN"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, c-format
-msgid "Wireless connection"
-msgstr "Ασύρματη σύνδεση"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "Σύνδεση ADSL"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Καλωδιακή σύνδεση"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "Σύνδεση ISDN"
-
-#: network/netconnect.pm:309
-#, c-format
-msgid "Modem connection"
-msgstr "Σύνδεση μόντεμ"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Επιλέξτε τη σύνδεση που θέλετε να ρυθμίσετε"
-
-#: network/netconnect.pm:334
-#, fuzzy, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Τώρα θα ρυθμίσουμε την %s σύνδεση.\n"
-"\n"
-"\n"
-"Πατήστε το OK για να ξεκινήσετε"
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Ρυθμίσεις σύνδεσης"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Παρακαλώ ελέγξτε ή συμπληρώστε το παρακάτω πεδίο"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ κάρτας"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "DMA κάρτας"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "IO κάρτας"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 κάρτας"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 κάρτας"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Προσωπικός αριθμός τηλεφώνου"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Όνομα παροχέα (π.χ. provider.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Αριθμός τηλεφώνου παροχέα"
-
-#: network/netconnect.pm:358
-#, fuzzy, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "dns 1 Παροχέα (προαιρετικό)"
-
-#: network/netconnect.pm:359
-#, fuzzy, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "dns 2 Παροχέα (προαιρετικό)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Τρόπος κλήσης"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Ταχύτητα σύνδεσης"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Χρόνος εκτός σύνδεσης (σε δεύτερα)"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Λογαριασμός Σύνδεσης (όνομα χρήστη)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Κωδικός Πρόσβασης"
-
-#: network/netconnect.pm:382
-#, fuzzy, c-format
-msgid "Cable: account options"
-msgstr "Επιλογές Σύνδεσης"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, fuzzy, c-format
-msgid "Select the network interface to configure:"
-msgstr "Επιλέξτε συσκευή δικτύου"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, c-format
-msgid "Net Device"
-msgstr "Συσκευή Δικτύου"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Εξωτερικό ISDN modem"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, c-format
-msgid "Select a device!"
-msgstr "Επιλέξτε μια συσκευή !"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Ρυθμίσεις ISDN"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Τι είδους κάρτας έχετε;"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Εάν έχετε ISA κάρτα, οι τιμές στην επόμενη οθόνη θα πρέπει να είναι σωστές.\n"
-"\n"
-"Εάν έχετε PCMCIA κάρτα, πρέπει να ξέρετε το irq και το io της κάρτας σας.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Συνέχεια"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Ακύρωση"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Ποια από τις παρακάτω κάρτες ISDN είναι η δικιά σας;"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Οδηγός"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Ποιο πρωτόκολλο θέλετε να χρησιμοποιήσετε;"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Πρωτόκολλο"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Επιλέξτε τον παροχέα σας\n"
-" Εάν δεν είναι στον κατάλογο, επιλέξτε Unlisted"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, fuzzy, c-format
-msgid "Provider:"
-msgstr "Προφίλ: "
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Το μόντεμ σας δεν υποστηρίζεται από το σύστημα.\n"
-"Ρίξτε μια ματιά στο http://www.linmodems.org"
-
-#: network/netconnect.pm:573
-#, fuzzy, c-format
-msgid "Select the modem to configure:"
-msgstr "Επιλέξτε συσκευή δικτύου"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Σε ποια σειριακή πόρτα είναι συνδεδεμένο το μόντεμ σας;"
-
-#: network/netconnect.pm:658
-#, fuzzy, c-format
-msgid "Select your provider:"
-msgstr "Επιλογή Spooler Εκτυπωτή"
-
-#: network/netconnect.pm:682
-#, fuzzy, c-format
-msgid "Dialup: account options"
-msgstr "Επιλογές Σύνδεσης"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Όνομα σύνδεσης"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Αριθμός τηλεφώνου"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "'Όνομα Χρήστη"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, fuzzy, c-format
-msgid "Dialup: IP parameters"
-msgstr "Παράμετροι"
-
-#: network/netconnect.pm:705
-#, fuzzy, c-format
-msgid "IP parameters"
-msgstr "Παράμετροι"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "Διεύθυνση IP"
-
-#: network/netconnect.pm:707
-#, fuzzy, c-format
-msgid "Subnet mask"
-msgstr "Μάσκα δικτύου"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr ""
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Όνομα Τομέα"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Πρώτος εξυπηρετητής DNS (προαιρετικό)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Δεύτερος εξυπηρετητής DNS (προαιρετικό)"
-
-#: network/netconnect.pm:726
-#, fuzzy, c-format
-msgid "Set hostname from IP"
-msgstr "Δικτυακό όνομα εκτυπωτή ή IP"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Πύλη δικτύου"
-
-#: network/netconnect.pm:739
-#, fuzzy, c-format
-msgid "Gateway IP address"
-msgstr "Διεύθυνση IP"
-
-#: network/netconnect.pm:775
-#, fuzzy, c-format
-msgid "ADSL configuration"
-msgstr "Ρύθμιση LAN"
-
-#: network/netconnect.pm:819
-#, fuzzy, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Παρακαλώ επιλέξτε την χώρα σας."
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, fuzzy, c-format
-msgid "Use a floppy"
-msgstr "Αποθήκευση σε δισκέτα"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, fuzzy, c-format
-msgid "Use my Windows partition"
-msgstr "Γίνεται αλλαγή τις κατάτμησης των Windows"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr ""
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr ""
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr ""
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr ""
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr ""
-
-#: network/netconnect.pm:972
-#, fuzzy, c-format
-msgid "Encapsulation:"
-msgstr "Κλειδί κρυπτογράφησης"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, fuzzy, c-format
-msgid "Could not install the %s package!"
-msgstr "Εγκατάσταση πακέτου %s"
-
-#: network/netconnect.pm:1048
-#, fuzzy, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Δικτυακό Όνομα Zeroconf"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, fuzzy, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Ρύθμιση συσκευής δικτύου %s"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Παρακαλώ εισάγετε τις IP ρυθμίσεις για αυτό το σύστημα.\n"
-"Κάθε στοιχείο πρέπει να εισαχθεί ως IP διεύθυνση με αριθμούς\n"
-"χωρισμένους με τελείες (παράδειγμα: 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Πρέπει να ορίστε τον δικτυακό όνομα ή την IP διεύθυνση.\n"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Όνομα συστήματος"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Μάσκα δικτύου"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-"Αναζήτηση ταυτότητας της κάρτας δικτύου (χρήσιμο για φορητούς υπολογιστές)"
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Ρυθμίσεις δικτύου"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Στην εκκίνηση συστήματος"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, fuzzy, c-format
-msgid "Metric"
-msgstr "απαγόρευση"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr "πελάτης DHCP"
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Χρόνος εκτός σύνδεσης (σε δεύτερα)"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "Η IP του εξυπηρετητή DNS"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Η IP διεύθυνση πρέπει να είναι σε μορφή 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "Η IP διεύθυνση της πύλης πρέπει να είναι της μορφής 1.2.3.4"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr ""
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr ""
-
-#: network/netconnect.pm:1167
-#, fuzzy, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Επιλέξτε τον εξυπηρετητή Χ"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, fuzzy, c-format
-msgid "Install a new driver"
-msgstr "Εσωτερικός εξυπηρετητής αλληλογραφίας"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, fuzzy, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr "Παρακαλώ ορίστε τον δικτυακό όνομα ή την IP"
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, fuzzy, c-format
-msgid "Operating Mode"
-msgstr "Για Προχωρημένους"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Managed"
-msgstr "Επιλέξτε γλώσσα"
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Master"
-msgstr "Μαγιότ"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Repeater"
-msgstr "Επαναλήπτης"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Δευτερεύων"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Αυτόματο"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr ""
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, fuzzy, c-format
-msgid "Network ID"
-msgstr "Δίκτυο"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr ""
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr ""
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr ""
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr ""
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, fuzzy, c-format
-msgid "Fragmentation"
-msgstr "Σταθμός παιχνιδιών"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Παρακαλώ εισάγετε το όνομα του συστήματος.\n"
-"Το όνομα αυτό πρέπει να είναι ένα πλήρες όνομα συστήματος,\n"
-"όπως π.χ. ``mybox.mylab.myco.com''.\n"
-"Μπορείτε επίσης να εισάγετε και την διεύθυνση IP της πύλης δικτύου"
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, fuzzy, c-format
-msgid "Host name (optional)"
-msgstr "Ρύθμιση συστήματος"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Όνομα συστήματος"
-
-#: network/netconnect.pm:1370
-#, fuzzy, c-format
-msgid "DNS server 1"
-msgstr "Εξυπηρετητής DNS"
-
-#: network/netconnect.pm:1371
-#, fuzzy, c-format
-msgid "DNS server 2"
-msgstr "Εξυπηρετητής DNS"
-
-#: network/netconnect.pm:1372
-#, fuzzy, c-format
-msgid "DNS server 3"
-msgstr "Εξυπηρετητής DNS"
-
-#: network/netconnect.pm:1373
-#, fuzzy, c-format
-msgid "Search domain"
-msgstr "Τομέας NIS"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Πύλη (π.χ. %s)"
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Συσκευή πύλης"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Η IP διεύθυνση DNS πρέπει να είναι της μορφής 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Η IP διεύθυνση της πύλης πρέπει να είναι της μορφής 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, c-format
-msgid "Zeroconf Host name"
-msgstr "Δικτυακό Όνομα Zeroconf"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-"Έχετε ρυθμίσει πολλούς τρόπους για να συνδέεστε στο Διαδίκτυο.\n"
-"Επιλέξτε αυτόν που θέλετε να χρησιμοποιήσετε.\n"
-"\n"
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Σύνδεση Διαδικτύου"
-
-#: network/netconnect.pm:1432
-#, fuzzy, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Τι ρύθμιση Xorg θέλετε να έχετε;"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Θέλετε να συνδέεστε κατά την εκκίνηση;"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Θέλετε να συνδέεστε κατά την εκκίνηση;"
-
-#: network/netconnect.pm:1478
-#, fuzzy, c-format
-msgid "Automatically at boot"
-msgstr "Στην εκκίνηση συστήματος"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, fuzzy, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Θέλετε να συνδέεστε κατά την εκκίνηση;"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr "Το δίκτυο πρέπει να επανεκκινηθεί, Θέλετε να το επανεκκινήσετε ;"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Ρυθμίσεις δικτύου"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Ένα πρόβλημα εμφανίστηκε κατά την επανεκκίνηση του δικτύου: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Θέλετε να δοκιμάσετε να συνδεθείτε στο Διαδίκτυο τώρα;"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Δοκιμή σύνδεσης... "
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Το σύστημα είναι τώρα συνδεμένο στο Διαδίκτυο."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Για λόγους ασφαλείας, θα αποσυνδεθείτε τώρα."
-
-#: network/netconnect.pm:1552
-#, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"Το σύστημα φαίνεται να μην είναι συνδεμένο στο Διαδίκτυο\n"
-"Προσπαθήστε να ξαναρυθμίσετε τη σύνδεσή σας."
-
-#: network/netconnect.pm:1567
-#, fuzzy, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-"Συγχαρητήρια, η ρύθμιση δικτύου και διαδικτύου τελείωσε.\n"
-"Οι ρυθμίσεις θα εφαρμοστούν τώρα στο σύστημά σας.\n"
-"\n"
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"Αφού γίνει αυτό, προτείνουμε να επανεκκινήσετε το Χ περιβάλλον για να "
-"αποφύγετε τα προβλήματα αλλαγής δικτυακού ονόματος."
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"Προβλήματα κατά τη ρύθμιση.\n"
-"Δοκιμάστε τη σύνδεση με το net_monitor ή το mcc. Αν δεν λειτουργήσει η "
-"σύνδεση, τότε θα πρέπει να εκκινήσετε ξανά τη ρύθμιση."
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Επειδή κάνετε μια δικτυακή εγκατάσταση, το δίκτυο είναι ήδη ρυθμισμένο.\n"
-"Κάντε κλικ στο Εντάξει για να διατηρήσετε τις ρυθμίσεις σας, ή άκυρο για να "
-"ξαναρυθμίσετε τη σύνδεση στο Διαδίκτυο.\n"
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Ρυθμίσεις proxies"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Ο proxy πρέπει να είναι http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Το URL πρέπει να ξεκινά με 'http:' ή 'ftp:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Ανιχνεύθηκε ρύθμιση του Τοίχους Προστασίας!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Προσοχή! Ανιχνεύθηκε μια ήδη υπάρχουσα ρύθμιση Τοίχους Προστασίας. Ίσως "
-"χρειαστούν ορισμένες χειροκίνητες ρυθμίσεις μετά την εγκατάσταση."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-
-#: network/tools.pm:190
-#, fuzzy, c-format
-msgid "Insert floppy"
-msgstr "Εισάγετε δισκέτα στον οδηγό %s"
-
-#: network/tools.pm:191
-#, fuzzy, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr "Εισάγετε μια μορφοποιημένη δισκέτα FAT στον οδηγό %s"
-
-#: network/tools.pm:196
-#, fuzzy, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Πού θέλετε να συνδέσετε την συσκευή %s;"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "σύνδεση απέτυχε: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Η εκτεταμένη κατάτμηση δεν υποστηρίζεται σε αυτόν τον τύπο συστήματος"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Υπάρχει ένα κενό στον πίνακα κατατμήσεων μα δεν μπορώ να το χρησιμοποιήσω.\n"
-"Η μοναδική λύση είναι να μετακινήσετε τις πρωτεύουσες κατατμήσεις σας έτσι "
-"ώστε το κενό να βρεθεί δίπλα στην εκτεταμένη κατάτμηση"
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Η επαναφορά από το αρχείο %s απέτυχε: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Κατεστραμμένο εφεδρικό αρχείο"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Σφάλμα εγγραφής στο αρχείο %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Κάτι κακό συμβαίνει στο δίσκο σας. \n"
-"Ένα τεστ ελέγχου της ακεραιότητας των δεδομένων απέτυχε. \n"
-"Αυτό σημαίνει πως η οποιαδήποτε εγγραφή στο δίσκο θα καταλήξει σαν τυχαία "
-"σκουπίδια."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "πρέπει να υπάρχει"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "σημαντικό"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "πολύ καλό"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "καλό"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "ίσως"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "Αποστολή αρχείων..."
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(στον %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr "(σε αυτό το μηχάνημα)"
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, fuzzy, c-format
-msgid "Configured on other machines"
-msgstr "Ρύθμιση της σύνδεσης"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Στον εξυπηρετητή CUPS \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Προεπιλεγμένος)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr "PDQ - Print, Do not Queue"
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr "PDQ"
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr "LPD"
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr "LPRng"
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:151
-#, fuzzy, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr "CUPS - Common Unix Printing System"
-
-#: printer/data.pm:152
-#, fuzzy, c-format
-msgid "Remote CUPS"
-msgstr "Απομακρυσμένος εξυπηρετητής CUPS"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Άγνωστο Μοντέλο"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Τοπικός εκτυπωτής"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Απομακρυσμένος εκτυπωτής"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Απομακρυσμένος εκτυπωτής σε εξυπηρετητή CUPS"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Απομακρυσμένος εκτυπωτής σε εξυπηρετητή lpd"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Εκτυπωτής δικτύου (TCP/Socket)"
-
-#: printer/main.pm:32
-#, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Εκτυπωτής σε εξυπηρετητή SMB/Windows 95/98/NT"
-
-#: printer/main.pm:33
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Εκτυπωτή σε εξυπηρετητή NetWare"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, c-format
-msgid "Enter a printer device URI"
-msgstr "Εισάγετε συσκευή εκτυπωτή URI"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr "Διασωλήνωση εργασίας σε εντολή"
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "συνιστάται"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Άγνωστο μοντέλο"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, fuzzy, c-format
-msgid "Configured on this machine"
-msgstr "(σε αυτό το μηχάνημα)"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " στη παράλληλη θήρα #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", εκτυπωτής USB #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", εκτυπωτής USB"
-
-#: printer/main.pm:369
-#, fuzzy, c-format
-msgid ", HP printer on a parallel port"
-msgstr "Εκτυπωτής στην παράλληλη θήρα #%s"
-
-#: printer/main.pm:371
-#, fuzzy, c-format
-msgid ", HP printer on USB"
-msgstr ", εκτυπωτής USB"
-
-#: printer/main.pm:373
-#, fuzzy, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ", πολυχρηστική συσκευή στο HP JetDirect"
-
-#: printer/main.pm:375
-#, fuzzy, c-format
-msgid ", HP printer"
-msgstr ", εκτυπωτής USB"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ", πολυχρηστική συσκευή στην παράλληλη θήρα #%s"
-
-#: printer/main.pm:384
-#, fuzzy, c-format
-msgid ", multi-function device on a parallel port"
-msgstr ", πολυχρηστική συσκευή στην παράλληλη θήρα #%s"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ", πολυχρηστική συσκευή στην USB"
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", πολυχρηστική συσκευή στο HP JetDirect"
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ", πολυχρηστική συσκευή"
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", εκτύπωση στο %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "στον εξυπηρετητή LPD \"%s\", στον εκτυπωτή \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", θύρα %s"
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "στον εξυπηρετητή SMB/Windows \"%s\", κοινόχρηστο \"%s\""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr "στον εξυπηρετητή Novell \"%s\", στον εκτυπωτή \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ", με την εντολή %s"
-
-#: printer/main.pm:428
-#, fuzzy, c-format
-msgid "Parallel port #%s"
-msgstr " στη παράλληλη θήρα #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "εκτυπωτής USB #%s"
-
-#: printer/main.pm:433
-#, fuzzy, c-format
-msgid "USB printer"
-msgstr ", εκτυπωτής USB"
-
-#: printer/main.pm:437
-#, fuzzy, c-format
-msgid "HP printer on a parallel port"
-msgstr "Εκτυπωτής στην παράλληλη θήρα #%s"
-
-#: printer/main.pm:439
-#, fuzzy, c-format
-msgid "HP printer on USB"
-msgstr "Δεν βρέθηκε εκτυπωτής!"
-
-#: printer/main.pm:441
-#, fuzzy, c-format
-msgid "HP printer on HP JetDirect"
-msgstr ", πολυχρηστική συσκευή στο HP JetDirect"
-
-#: printer/main.pm:443
-#, fuzzy, c-format
-msgid "HP printer"
-msgstr "Εκτυπωτής"
-
-#: printer/main.pm:449
-#, fuzzy, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr ", πολυχρηστική συσκευή στην παράλληλη θήρα #%s"
-
-#: printer/main.pm:452
-#, fuzzy, c-format
-msgid "Multi-function device on a parallel port"
-msgstr ", πολυχρηστική συσκευή στην παράλληλη θήρα #%s"
-
-#: printer/main.pm:454
-#, fuzzy, c-format
-msgid "Multi-function device on USB"
-msgstr ", πολυχρηστική συσκευή στην USB"
-
-#: printer/main.pm:456
-#, fuzzy, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr ", πολυχρηστική συσκευή στο HP JetDirect"
-
-#: printer/main.pm:458
-#, fuzzy, c-format
-msgid "Multi-function device"
-msgstr ", πολυχρηστική συσκευή"
-
-#: printer/main.pm:462
-#, fuzzy, c-format
-msgid "Prints into %s"
-msgstr ", εκτύπωση στο %s"
-
-#: printer/main.pm:465
-#, fuzzy, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "στον εξυπηρετητή LPD \"%s\", στον εκτυπωτή \"%s\""
-
-#: printer/main.pm:468
-#, fuzzy, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP host \"%s\", θύρα %s"
-
-#: printer/main.pm:473
-#, fuzzy, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "στον εξυπηρετητή SMB/Windows \"%s\", κοινόχρηστο \"%s\""
-
-#: printer/main.pm:478
-#, fuzzy, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "στον εξυπηρετητή Novell \"%s\", στον εκτυπωτή \"%s\""
-
-#: printer/main.pm:481
-#, fuzzy, c-format
-msgid "Uses command %s"
-msgstr ", με την εντολή %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URI: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr "Ακατέργαστος εκτυπωτής (Χωρίς οδηγό)"
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Τοπικό Δίκτυο(α)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Διεπαφή \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Δίκτυο %s"
-
-#: printer/main.pm:1187
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Όνομα συστήματος"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Θύρα %s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:67
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Ρυθμίσεις κοινής χρήσης εκτυπωτών CUPS"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Εδώ μπορείτε να επιλέξετε αν οι συνδεμένοι εκτυπωτές αυτού το μηχανήματος θα "
-"είναι προσβάσιμοι από απομακρυσμένα μηχανήματα και από ποια."
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-"Επίσης εδώ μπορείτε να ορίσετε αν οι εκτυπωτές που βρίσκονται σε "
-"απομακρυσμένα μηχανήματα θα είναι αυτόματα διαθέσιμοι και σε αυτό το "
-"μηχάνημα."
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-"Οι εκτυπωτές σε αυτό το μηχάνημα είναι διαθέσιμοι σε άλλους υπολογιστές"
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Βρείτε αυτόματα διαθέσιμους εκτυπωτές σε απομακρυσμένα μηχανήματα"
-
-#: printer/printerdrake.pm:82
-#, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Κοινόχρηστοι εκτυπωτές στους υπολογιστές/δίκτυα: "
-
-#: printer/printerdrake.pm:84
-#, c-format
-msgid "Custom configuration"
-msgstr "Προσαρμοσμένη Ρύθμιση"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(σε αυτό το μηχάνημα)"
-
-#: printer/printerdrake.pm:100
-#, c-format
-msgid "Additional CUPS servers: "
-msgstr "Πρόσθετοι εξυπηρετητές CUPS: "
-
-#: printer/printerdrake.pm:107
-#, fuzzy, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr "CUPS CUPS Όλα Printerdrake CUPS εξυπηρετητής εξυπηρετητής."
-
-#: printer/printerdrake.pm:115
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Αλλαγή συστήματος εκτύπωσης"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: printer/printerdrake.pm:123
-#, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Αυτόματη διόρθωση της ρύθμισης CUPS"
-
-#: printer/printerdrake.pm:125
-#, fuzzy, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-"Πότε CUPS\n"
-"\n"
-" LPD LPRng CUPS\n"
-"\n"
-"\n"
-"\n"
-" εξυπηρετητής\n"
-"\n"
-"."
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Ανοιχτό"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "κλειστό"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, c-format
-msgid "Sharing of local printers"
-msgstr "Κοινή χρήση τοπικών εκτυπωτών"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Αυτά είναι τα μηχανήματα όπου οι τοπικά συνδεμένοι εκτυπωτές(ης) πρέπει να "
-"είναι διαθέσιμοι:"
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr "Προσθήκη υπολογιστή/δίκτυο"
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr "Επεξεργασία επιλεγμένου υπολογιστή/δίκτυο"
-
-#: printer/printerdrake.pm:188
-#, c-format
-msgid "Remove selected host/network"
-msgstr "Αφαίρεση επιλεγμένου υπολογιστή/δίκτυο"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr "Διεύθυνση IP του υπολογιστή/δικτύου:"
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr "Λείπει η διεύθυνση του Υπολογιστή/Δικτύου."
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Παραδείγματα σωστών IP:\n"
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Αυτός ο υπολογιστής/δίκτυο είναι ήδη στη λίστα, δεν μπορεί να προστεθεί "
-"ξανά.\n"
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "CUPS"
-
-#: printer/printerdrake.pm:347
-#, fuzzy, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr "Προσθήκη CUPS."
-
-#: printer/printerdrake.pm:358
-#, c-format
-msgid "Add server"
-msgstr "Προσθήκη εξυπηρετητή"
-
-#: printer/printerdrake.pm:364
-#, c-format
-msgid "Edit selected server"
-msgstr "Επεξεργασία επιλεγμένου εξυπηρετητή"
-
-#: printer/printerdrake.pm:373
-#, c-format
-msgid "Remove selected server"
-msgstr "Αφαίρεση επιλεγμένου εξυπηρετητή"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-
-#: printer/printerdrake.pm:422
-#, c-format
-msgid "Server IP missing!"
-msgstr "Λείπει η IP του εξυπηρετητή!"
-
-#: printer/printerdrake.pm:428
-#, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Η διεύθυνση IP που εισάγατε δεν είναι σωστή.\n"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr "Ο αριθμός θύρας πρέπει να είναι ακέραιος αριθμός!"
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-"O εξυπηρετητής είναι ήδη στη λίστα, δεν μπορείτε να τον προσθέσετε ξανά.\n"
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Θύρα"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, fuzzy, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Απομακρυσμένος εκτυπωτής σε εξυπηρετητή lpd"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, fuzzy, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Λείπει η διεύθυνση του Υπολογιστή/Δικτύου."
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, c-format
-msgid "Reading printer data..."
-msgstr "Ανάγνωση δεδομένων εκτυπωτή..."
-
-#: printer/printerdrake.pm:587
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Επανεκκίνηση XFS"
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Τρόπος σύνδεσης εκτυπωτή"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Πώς είναι συνδεδεμένος ο εκτυπωτής σας;"
-
-#: printer/printerdrake.pm:617
-#, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"\n"
-"Εκτυπωτές που είναι συνδεμένοι σε απομακρυσμένους εξυπηρετητές CUPS δεν "
-"χρειάζεται να ρυθμιστούν εδώ, θα ανιχνευθούν αυτόματα."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-
-#: printer/printerdrake.pm:627
-#, fuzzy, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr "Αυτόματη ανίχνευση εκτυπωτές (Τοπικοί,  TCP/Socket, και εκτυπωτές SMB)"
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, fuzzy, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr "Η ταυτότητα χρήστη θα πρέπει να είναι ένας θετικός αριθμός"
-
-#: printer/printerdrake.pm:680
-#, c-format
-msgid "Checking your system..."
-msgstr "Έλεγχος του συστήματος σας..."
-
-#: printer/printerdrake.pm:697
-#, c-format
-msgid "and one unknown printer"
-msgstr "και ένας άγνωστος εκτυπωτής"
-
-#: printer/printerdrake.pm:699
-#, c-format
-msgid "and %d unknown printers"
-msgstr "και %d άγνωστοι εκτυπωτές"
-
-#: printer/printerdrake.pm:703
-#, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Οι παρακάτω εκτυπωτές\n"
-"\n"
-"%s%s\n"
-"είναι άμεσα συνδεμένοι στο σύστημά σας"
-
-#: printer/printerdrake.pm:705
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Ο παρακάτω εκτυπωτής\n"
-"\n"
-"%s%s\n"
-"είναι άμεσα συνδεμένοι στο σύστημά σας"
-
-#: printer/printerdrake.pm:706
-#, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr ""
-"Ο παρακάτω εκτυπωτής\n"
-"\n"
-"%s%s\n"
-"είναι άμεσα συνδεμένος στο σύστημά σας"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Ένας άγνωστος εκτυπωτής είναι συνδεμένος απευθείας στο σύστημά σας"
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Είναι %d εκτυπωτές συνδεμένοι απευθείας στο σύστημά σας"
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Δεν βρέθηκαν εκτυπωτές που να είναι συνδεμένοι στον υπολογιστή σας"
-
-#: printer/printerdrake.pm:717
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr ""
-" (Βεβαιωθείτε ότι όλοι οι εκτυπωτές σας είναι συνδεμένοι και σε "
-"λειτουργία).\n"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-"Θέλετε να ενεργοποιήσετε την εκτύπωση στους παραπάνω εκτυπωτές ή σε κάποιον "
-"άλλον στο τοπικό σας δίκτυο;\n"
-
-#: printer/printerdrake.pm:731
-#, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"Θέλετε να ενεργοποιήσετε την εκτύπωση σε εκτυπωτές στο τοπικό σας δίκτυο;\n"
-
-#: printer/printerdrake.pm:733
-#, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Θέλετε να ενεργοποιήσετε την εκτύπωση στους παραπάνω εκτυπωτές ;\n"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
-"Είστε βέβαιοι ότι θέλετε να ρυθμίσετε την εκτύπωση σε αυτό το μηχάνημα;\n"
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-"Σημ.: Ανάλογα με το μοντέλο του εκτυπωτή και το σύστημα εκτύπωσης θα "
-"εγκατασταθεί επιπλέον μέχρι και %d MB λογισμικό"
-
-#: printer/printerdrake.pm:774
-#, c-format
-msgid "Searching for new printers..."
-msgstr "Αναζήτηση για νέους εκτυπωτές..."
-
-#: printer/printerdrake.pm:833
-#, fuzzy, c-format
-msgid "Found printer on %s..."
-msgstr "Γίνεται αφαίρεση του εκτυπωτή \"%s\"..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr " στο "
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, c-format
-msgid "Printer model selection"
-msgstr "Επιλογή μοντέλου εκτυπωτή"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, c-format
-msgid "Which printer model do you have?"
-msgstr "Τι μοντέλο εκτυπωτή έχετε;"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-"\n"
-"\n"
-"Το Printerdrake δεν μπόρεσε να καθορίσει το μοντέλο του εκτυπωτή %s. "
-"Παρακαλώ επιλέξτε το σωστό μοντέλο από τη λίστα."
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-"Ο εκτυπωτής σας δεν υπάρχει στη λίστα, παρακαλώ διαλέξτε έναν συμβατό ή έναν "
-"παρόμοιο εκτυπωτή."
-
-#: printer/printerdrake.pm:875
-#, fuzzy, c-format
-msgid "Configuring printer on %s..."
-msgstr "Ρύθμιση εκτυπωτή \"%s\"..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Ρύθμιση εκτυπωτή \"%s\"..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, c-format
-msgid "Add a new printer"
-msgstr "Προσθήκη νέου εκτυπωτή"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-"\n"
-"Καλώς ορίσατε στον Οδηγό Ρύθμισης Εκτυπωτή\n"
-"\n"
-"Ο οδηγός αυτός σας βοηθάει στην εγκατάσταση τοπικών ή απομακρυσμένων "
-"εκτυπωτών που θα χρησιμοποιηθούν σε αυτό και σε άλλα μηχανήματα στο δίκτυο\n"
-"\n"
-"Σας ζητά όλες τις απαραίτητες πληροφορίες για να ρυθμίσετε τους εκτυπωτές "
-"και να αποκτήσετε πρόσβαση σε όλους τους διαθέσιμους οδηγούς εκτυπωτών, "
-"επιλογές των οδηγών και τους τύπους συνδέσεων."
-
-#: printer/printerdrake.pm:1065
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-" Εκτυπωτής Οδηγός\n"
-"\n"
-" Τομέας Windows \n"
-"\n"
-" ανιχνεύθηκε Τομέας Windows \n"
-"\n"
-" Τομέας Windows \n"
-"\n"
-" Επόμενο Άκυρο."
-
-#: printer/printerdrake.pm:1074
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-" Εκτυπωτής Οδηγός\n"
-"\n"
-"\n"
-"\n"
-" ανιχνεύθηκε\n"
-"\n"
-" Επόμενο Άκυρο."
-
-#: printer/printerdrake.pm:1082
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-" Εκτυπωτής Οδηγός\n"
-"\n"
-"\n"
-"\n"
-" ανιχνεύθηκε\n"
-"\n"
-"\n"
-"\n"
-" Επόμενο Άκυρο."
-
-#: printer/printerdrake.pm:1091
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-" Εκτυπωτής Οδηγός\n"
-"\n"
-"\n"
-"\n"
-" ανιχνεύθηκε\n"
-"\n"
-" Επόμενο Άκυρο."
-
-#: printer/printerdrake.pm:1142
-#, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Αυτόματη ανίχνευση εκτυπωτών συνδεμένοι σε αυτό το μηχάνημα"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Αυτόματη ανίχνευση εκτυπωτών συνδεμένοι στο τοπικό σας δίκτυο"
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-"Αυτόματη ανίχνευση εκτυπωτών συνδεμένοι σε μηχανήματα που έχουν Microsoft "
-"Windows"
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "Αυτόματη ανίχνευση"
-
-#: printer/printerdrake.pm:1171
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-"\n"
-"Συγχαρητήρια, ο εκτυπωτής σας εγκαταστάθηκε και ρυθμίστηκε!\n"
-"\n"
-"Μπορείτε τώρα να εκτυπώσετε με την εντολή \"Εκτύπωση\" της εφαρμογής σας "
-"(συνήθως κάτω από το μενού \"Αρχείο\").\n"
-"\n"
-"Αν θέλετε να προσθέσετε, να αφαιρέσετε ή να μετονομάσετε τον εκτυπωτή σας  ή "
-"αν θέλετε να αλλάξετε τις προεπιλεγμένες ρυθμίσεις σας (θέση του χαρτιού, "
-"ποιότητα εκτύπωσης)  επιλέξτε \"Εκτυπωτής\" στο τμήμα \"Υλικό\"του Κέντρου "
-"Ελέγχου Mandriva."
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, fuzzy, c-format
-msgid "Could not install the %s packages!"
-msgstr "Εγκατάσταση πακέτου %s"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Αυτόματη ανίχνευση εκτυπωτών"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Εντοπισμός συσκευών..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", εκτυπωτής δικτύου \"%s\", θύρα %s"
-
-#: printer/printerdrake.pm:1248
-#, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Εκτυπωτής \"%s\" σε εξυπηρετητή SMB/Windows \"%s\""
-
-#: printer/printerdrake.pm:1252
-#, c-format
-msgid "Detected %s"
-msgstr "Βρέθηκε ο %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Εκτυπωτής στην παράλληλη θήρα #%s"
-
-#: printer/printerdrake.pm:1263
-#, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Εκτυπωτής δικτύου \"%s\", θύρα %s"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Εκτυπωτής \"%s\" σε εξυπηρετητή SMB/Windows \"%s\""
-
-#: printer/printerdrake.pm:1347
-#, c-format
-msgid "Local Printer"
-msgstr "Τοπικός Εκτυπωτής"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-"Δεν βρέθηκαν τοπικοί εκτυπωτές! Για να ρυθμίσετε μόνοι σας έναν εκτυπωτή "
-"δώστε το όνομα εκτυπωτή/όνομα αρχείου στη γραμμή εισαγωγής (Παράλληλες "
-"θύρες: /dev/lp0, /dev/lp1, ..., αντίστοιχες των LPT1:, LPT2:, ..., 1ος "
-"εκτυπωτής USB: /dev/usb/lp0, 2ος USB εκτυπωτής: /dev/usb/lp1, ...)."
-
-#: printer/printerdrake.pm:1352
-#, c-format
-msgid "You must enter a device or file name!"
-msgstr "Πρέπει να ορίσετε μια συσκευή ή ένα όνομα αρχείου!"
-
-#: printer/printerdrake.pm:1361
-#, c-format
-msgid "No printer found!"
-msgstr "Δεν βρέθηκε εκτυπωτής!"
-
-#: printer/printerdrake.pm:1369
-#, c-format
-msgid "Local Printers"
-msgstr "Τοπικοί εκτυπωτές"
-
-#: printer/printerdrake.pm:1370
-#, c-format
-msgid "Available printers"
-msgstr "Διαθέσιμοι εκτυπωτής"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Οι παρακάτω εκτυπωτές βρέθηκαν αυτόματα."
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Αν δεν είναι αυτός που θέλετε να ρυθμίσετε, εισάγετε το όνομα συσκευής/όνομα "
-"αρχείου στη γραμμή εισαγωγής"
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-"Εναλλακτικά, μπορείτε να εισάγετε ένα όνομα συσκευής/αρχείου στη γραμμή "
-"εισαγωγής"
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Ορίστε η λίστα των εκτυπωτών που ανιχνεύτηκαν αυτόματα."
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-"Παρακαλώ επιλέξτε τον εκτυπωτή που θέλετε να ρυθμίσετε ή εισάγετε ένα όνομα "
-"συσκευής/αρχείου στη γραμμή εισαγωγής"
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-"Παρακαλώ επιλέξτε τον εκτυπωτή στον οποίο θα αποστέλλονται οι εργασίες "
-"εκτύπωσης ή δώστε το όνομα συσκευής/αρχείου στη γραμμή εισαγωγής"
-
-#: printer/printerdrake.pm:1385
-#, fuzzy, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr "ανιχνεύθηκε."
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Προς το παρόν δεν υπάρχει άλλη εναλλακτική"
-
-#: printer/printerdrake.pm:1389
-#, fuzzy, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr "ανιχνεύθηκε."
-
-#: printer/printerdrake.pm:1390
-#, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr ""
-"Παρακαλώ επιλέξτε τον εκτυπωτή στον οποίο θα αποστέλλονται οι εργασίες "
-"εκτύπωσης."
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"Παρακαλώ επιλέξτε τη θύρα όπου είναι συνδεδεμένος ο εκτυπωτή σας ή εισάγετε "
-"ένα όνομα συσκευής/αρχείου στη γραμμή εισαγωγής"
-
-#: printer/printerdrake.pm:1393
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Επιλέξτε σε ποία θήρα είναι συνδεδεμένος ο εκτυπωτής σας."
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-"(Παράλληλες θύρες: /dev/lp0, /dev/lp1, ..., αντίστοιχες των LPT1:, "
-"LPT2:, ..., 1ος εκτυπωτής USB: /dev/usb/lp0, 2ος USB εκτυπωτής: /dev/usb/"
-"lp1, ...)."
-
-#: printer/printerdrake.pm:1399
-#, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Πρέπει να επιλέξτε/ορίσετε μια συσκευή/εκτυπωτή!"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, fuzzy, c-format
-msgid "Aborting"
-msgstr "Ακύρωση"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Επιλογές απομακρυσμένου lpd εκτυπωτή"
-
-#: printer/printerdrake.pm:1476
-#, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Για να χρησιμοποιήσετε έναν απομακρυσμένο εκτύπωση πρέπει να δώσετε το "
-"δικτυακό όνομα του εξυπηρετητή εκτυπώσεων, καθώς και το όνομα του εκτυπωτή "
-"σε αυτόν τον εξυπηρετητή."
-
-#: printer/printerdrake.pm:1477
-#, c-format
-msgid "Remote host name"
-msgstr "Απομακρυσμένο δικτυακό όνομα"
-
-#: printer/printerdrake.pm:1478
-#, c-format
-msgid "Remote printer name"
-msgstr "Απομακρυσμένος όνομα εκτυπωτή"
-
-#: printer/printerdrake.pm:1481
-#, c-format
-msgid "Remote host name missing!"
-msgstr "Το απομακρυσμένο δικτυακό όνομα λείπει!"
-
-#: printer/printerdrake.pm:1485
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Το απομακρυσμένο όνομα εκτυπωτή λείπει!"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Πληροφορίες"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Βρέθηκε το μοντέλο: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, c-format
-msgid "Scanning network..."
-msgstr "Αναζήτηση στο δίκτυο..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ",  εκτυπωτής \"%s\"στον εξυπηρετητή \"%s\""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Εκτυπωτής \"%s\"στον εξυπηρετητή \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Επιλογές εκτυπωτή SMB (Windows 9x/NT)"
-
-#: printer/printerdrake.pm:1656
-#, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Για να εκτυπώσετε σε έναν SMB εκτυπωτή, πρέπει να δώσετε το  δικτυακό όνομα "
-"SMB (Σημείωση! Μπορεί να είναι διαφορετικό από το δικτυακό όνομα TCP/IP!) "
-"και ίσως την διεύθυνση IP του εξυπηρετητή εκτυπώσεων, το όνομα του εκτυπωτή "
-"στον οποίο επιθυμείτε πρόσβαση, καθώς και οποιαδήποτε απαραίτητη πληροφορία "
-"περί κωδικού χρήστη, κωδικού πρόσβασης και τομέα ή ομάδας εργασίας."
-
-#: printer/printerdrake.pm:1657
-#, fuzzy, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr "ανιχνεύθηκε χρήστης."
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "Δικτυακό όνομα SMB εξυπηρετητή"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP διεύθυνση SMB εξυπηρετητή"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Όνομα πόρου:"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Ομάδα εργασίας:"
-
-#: printer/printerdrake.pm:1666
-#, c-format
-msgid "Auto-detected"
-msgstr "Εντοπίστηκαν αυτόματα"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Είτε το όνομα του εξυπηρετητή ή η IP του πρέπει να δοθούν!"
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr "Το όνομα για το Samba λείπει!"
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "ΠΡΟΕΙΔΟΠΟΙΗΣΗ ΑΣΦΑΛΕΙΑΣ!"
-
-#: printer/printerdrake.pm:1687
-#, fuzzy, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Τομέας Windows  Τομέας Windows  εξυπηρετητής χρήστης\n"
-"\n"
-" Τομέας Windows  εξυπηρετητής\n"
-"\n"
-" Τομέας Windows  εξυπηρετητής Ολοκληρώθηκε\n"
-"\n"
-" Τομέας Windows  εξυπηρετητής LPD Printerdrake\n"
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Ρυθμίστε τον εξυπηρετητή Windows ώστε να είναι διαθέσιμος ο εκτυπωτής στο "
-"πρωτόκολλο IPP και ρυθμίστε τις εκτυπώσεις από αυτό το μηχάνημα με τον τύπο "
-"σύνδεσης \"%s\" στο Printerdrake.\n"
-"\n"
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Συνδέστε τον εκτυπωτή σας σε έναν εξυπηρετητή Linux και συνδέστε σε αυτόν τα "
-"μηχανήματα Windows σαν πελάτες\n"
-"\n"
-"Θέλετε πραγματικά να συνεχίσετε τις ρυθμίσεις του εκτυπωτή σας που κάνετε;"
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "Επιλογές Εκτυπωτή NetWare"
-
-#: printer/printerdrake.pm:1780
-#, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Για να εκτυπώσετε σε έναν εκτυπωτή NetWare, πρέπει να δώσετε το όνομα του "
-"εξυπηρετητή εκτυπώσεων NetWare (Σημείωση! Μπορεί να είναι διαφορετικό από το "
-"δικτυακό όνομα TCP/IP!), το όνομα του εκτυπωτή στον οποίο επιθυμείτε "
-"πρόσβαση, καθώς και\n"
-"οποιαδήποτε απαραίτητη πληροφορία περί χρήστη και κωδικού πρόσβασης."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Εξυπηρετητής Εκτυπώσεων"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Όνομα Ουράς Εκτυπωτή"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr "Το όνομα του εξυπηρετητή NCP λείπει!"
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "Το όνομα της NCP ουράς λείπει!"
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", host \"%s\",θύρα %s"
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Host \"%s\", θύρα %s"
-
-#: printer/printerdrake.pm:1913
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Επιλογές εκτυπωτή TCP/Socket"
-
-#: printer/printerdrake.pm:1915
-#, fuzzy, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr "ανιχνεύθηκε εξ' ορισμού."
-
-#: printer/printerdrake.pm:1916
-#, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Για να εκτυπώσετε σε έναν εκτυπωτή socket ή TCP , πρέπει να δώσετε το \n"
-"δικτυακό όνομα του εκτυπωτή και προαιρετικά τον αριθμό θύρας ( εξ ορισμού "
-"9100). Στους εξυπηρετητές HP JetDirect ή θύρα συνήθως είναι 9100, σε άλλους "
-"εξυπηρετητές ποικίλη. Δείτε το εγχειρίδιο χρήσης του υλικού σας."
-
-#: printer/printerdrake.pm:1920
-#, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Το δικτυακό όνομα του εκτυπωτή  ή το IP λείπει!"
-
-#: printer/printerdrake.pm:1949
-#, c-format
-msgid "Printer host name or IP"
-msgstr "Δικτυακό όνομα εκτυπωτή ή IP"
-
-#: printer/printerdrake.pm:2012
-#, fuzzy, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Ανανέωση δεδομένων εκτυπωτή..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "Συσκευή εκτυπωτή URI"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"Μπορείτε να ορίσετε κατευθείαν το URI για την πρόσβαση στον εκτυπωτή. Το URI "
-"πρέπει να τηρεί είτε τις CUPS είτε τις Foomatic προδιαγραφές. Όχι πως δεν "
-"υποστηρίζονται όλοι οι URI τύποι από όλα τα spoolers."
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "Ένα σωστό URI πρέπει να εισαχθεί!"
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr "Διασωλήνωση εργασίας σε εντολή"
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-
-#: printer/printerdrake.pm:2149
-#, c-format
-msgid "Command line"
-msgstr "Γραμμή εντολών"
-
-#: printer/printerdrake.pm:2153
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "Ένα σωστό URI πρέπει να εισαχθεί!"
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, fuzzy, c-format
-msgid "HPLIP"
-msgstr "PL_IP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr ""
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Είναι ο εκτυπωτής σας μια πολυχρηστική συσκευή από την HP ή την Sony "
-"(OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, "
-"DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200;"
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Εγκατάσταση πακέτου %s..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, fuzzy, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr "Αδυναμία δημιουργίας καταλόγου ρυθμίσεων ανά χρήστη gnome `%s': %s\n"
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr "Έλεγχος και ρύθμιση της συσκευή %s..."
-
-#: printer/printerdrake.pm:2277
-#, fuzzy, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Σε ποιόν τομέα θέλετε να μετακινηθείτε;"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Εγκατάσταση πακέτου SANE..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Εγκατάσταση πακέτου mtools..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Σάρωση στη πολυχρηστική συσκευή HP που διαθέτετε"
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2509
-#, fuzzy, c-format
-msgid "Configuring device..."
-msgstr "Ρύθμιση..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Γίνονται διαθέσιμες οι θύρες στο CUPS..."
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, c-format
-msgid "Reading printer database..."
-msgstr "Ανάγνωση βάσης δεδομένων εκτυπωτών..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Εισάγετε Όνομα Εκτυπωτή και Σχόλια"
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-"Το όνομα του εκτυπωτή πρέπει να περιέχει μόνο γράμματα, αριθμούς και τον "
-"χαρακτήρα underscore"
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Ο εκτυπωτής \"%s\" υπάρχει ήδη,\n"
-"Είστε βέβαιοι για την επικάλυψη των ρυθμίσεων;"
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"Κάθε εκτυπωτής χρειάζεται ένα όνομα (π.χ. \"εκτυπωτής\").Τα πεδία Περιγραφή "
-"και Τοποθεσία δεν χρειάζεται να συμπληρωθούν. Είναι απλά σχόλια για τους "
-"χρήστες."
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Όνομα εκτυπωτή"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Περιγραφή"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Τοποθεσία"
-
-#: printer/printerdrake.pm:2810
-#, c-format
-msgid "Preparing printer database..."
-msgstr "Ανάγνωση βάσης δεδομένων εκτυπωτών..."
-
-#: printer/printerdrake.pm:2927
-#, c-format
-msgid "Your printer model"
-msgstr "Το μοντέλο εκτυπωτή σας"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-"Το Printerdrake συνέκρινε το όνομα του μοντέλου από τον αυτόματο εντοπισμό "
-"με τη λίστα των μοντέλων από την βάση δεδομένων εκτυπωτών για να την "
-"καλύτερη επιλογή. Αυτή η επιλογή μπορεί να είναι λάθος, ειδικά εάν ο "
-"εκτυπωτής σας δεν είναι καταχωρημένος στην βάση δεδομένων. Δείτε λοιπόν αν η "
-"επιλογή του εκτυπωτή είναι σωστή και κάντε κλικ στο \"Το μοντέλο είναι σωστό"
-"\" εάν όχι κάντε κλικ στο \"Επιλέξτε το μοντέλο χειροκίνητα\" για να "
-"επιλέξετε χειροκίνητα το μοντέλο από την επόμενη οθόνη\n"
-"Για τον εκτυπωτή σας το Printerdrake βρήκε:\n"
-"\n"
-"%s"
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, c-format
-msgid "The model is correct"
-msgstr "Το μοντέλο είναι σωστό"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, c-format
-msgid "Select model manually"
-msgstr "Επιλέξτε το μοντέλο χειροκίνητα"
-
-#: printer/printerdrake.pm:2962
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-" Printerdrake."
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3020
-#, fuzzy, c-format
-msgid "Install PPD file from"
-msgstr "Εγκατάσταση rpm"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, fuzzy, c-format
-msgid "Floppy Disk"
-msgstr "Δισκέτα"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, fuzzy, c-format
-msgid "Other place"
-msgstr "Άλλες θύρες"
-
-#: printer/printerdrake.pm:3039
-#, fuzzy, c-format
-msgid "Select PPD file"
-msgstr "Επιλέξτε αρχείο"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr ""
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr ""
-
-#: printer/printerdrake.pm:3060
-#, fuzzy, c-format
-msgid "Installing PPD file..."
-msgstr "Εγκατάσταση %s ..."
-
-#: printer/printerdrake.pm:3178
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Ρυθμίσεις OKI winprinter"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-"Ρυθμίζετε έναν εκτυπωτή laser OKI winprinter. Αυτοί οι εκτυπωτές\n"
-"κάνουν χρήση ενός πολύ ειδικού πρωτοκόλλου επικοινωνίας και γι' αυτό "
-"λειτουργούν μόνο αν είναι συνδεμένοι στην πρώτη παράλληλη θύρα. Αν είναι "
-"συνδεμένος σε άλλη θύρα ή σε έναν εξυπηρετητή εκτυπώσεων παρακαλώ στην πρώτη "
-"παράλληλη πριν εκτυπώσετε την πρώτη δοκιμαστική σελίδα. Διαφορετικά ο "
-"εκτυπωτής δεν θα λειτουργήσει. Η ρυθμίσεις του τύπου σύνδεσης θα αγνοηθούν "
-"από τον οδηγό."
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Ρυθμίσεις εκτυπωτή μελάνης Lexmark"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Οι οδηγοί των εκτυπωτών μελάνης που παρέχονται από τη Lexmark υποστηρίζουν "
-"μόνο τοπικούς εκτυπωτές, δεν υποστηρίζουν εκτυπωτές σε απομακρυσμένους "
-"υπολογιστές ή εξυπηρετητές εκτυπώσεων. Παρακαλώ συνδέστε τον εκτυπωτή σας σε "
-"μια τοπική θύρα ή ρυθμίστε τον στο μηχάνημα που είναι συνδεδεμένος."
-
-#: printer/printerdrake.pm:3235
-#, fuzzy, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr "http://www.lexmark. Linux Άκυρο."
-
-#: printer/printerdrake.pm:3245
-#, fuzzy, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Ρυθμίσεις εκτυπωτή μελάνης Lexmark"
-
-#: printer/printerdrake.pm:3246
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-"Οι οδηγοί των εκτυπωτών μελάνης που παρέχονται από τη Lexmark υποστηρίζουν "
-"μόνο τοπικούς εκτυπωτές, δεν υποστηρίζουν εκτυπωτές σε απομακρυσμένους "
-"υπολογιστές ή εξυπηρετητές εκτυπώσεων. Παρακαλώ συνδέστε τον εκτυπωτή σας σε "
-"μια τοπική θύρα ή ρυθμίστε τον στο μηχάνημα που είναι συνδεδεμένος."
-
-#: printer/printerdrake.pm:3268
-#, fuzzy, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Ρύθμιση ήχου"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, fuzzy, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-"Οι οδηγοί των εκτυπωτών μελάνης που παρέχονται από τη Lexmark υποστηρίζουν "
-"μόνο τοπικούς εκτυπωτές, δεν υποστηρίζουν εκτυπωτές σε απομακρυσμένους "
-"υπολογιστές ή εξυπηρετητές εκτυπώσεων. Παρακαλώ συνδέστε τον εκτυπωτή σας σε "
-"μια τοπική θύρα ή ρυθμίστε τον στο μηχάνημα που είναι συνδεδεμένος."
-
-#: printer/printerdrake.pm:3295
-#, fuzzy, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Χειροκίνητη ρύθμιση"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
-
-#: printer/printerdrake.pm:3464
-#, fuzzy, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Εκτυπωτής εξ' ορισμού\n"
-"\n"
-" Υψηλό."
-
-#: printer/printerdrake.pm:3589
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Επιλογή μοντέλου εκτυπωτή"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Η επιλογή %s πρέπει να είναι ακέραιος αριθμός!"
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Η επιλογή %s πρέπει να είναι αριθμός!"
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr "Επιλογή %s εκτός ορίου!"
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Θέλετε να ορίσετε αυτόν τον εκτυπωτή (\"%s\")\n"
-"σαν τον προεπιλεγμένο εκτυπωτή;"
-
-#: printer/printerdrake.pm:3672
-#, c-format
-msgid "Test pages"
-msgstr "Δοκιμαστικές σελίδες"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Παρακαλώ επιλέξτε τις δοκιμαστικές σελίδες που θα εκτυπωθούν.\n"
-"Σημ.: Η δοκιμαστική σελίδα φωτογραφίας μπορεί να διαρκέσει αρκετό χρόνο για "
-"να εκτυπωθεί και σε εκτυπωτές laser με μικρή μνήμη μπορεί και να μην "
-"εκτυπωθεί. Στις περισσότερες περιπτώσεις η εκτύπωση τις τυπικής δοκιμαστικής "
-"σελίδας αρκεί."
-
-#: printer/printerdrake.pm:3677
-#, c-format
-msgid "No test pages"
-msgstr "Χωρίς δοκιμαστικές σελίδες"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Εκτύπωση"
-
-#: printer/printerdrake.pm:3703
-#, c-format
-msgid "Standard test page"
-msgstr "Τυπική δοκιμαστική σελίδα"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Εναλλακτική δοκιμαστική σελίδα (Letter)"
-
-#: printer/printerdrake.pm:3709
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Εναλλακτική δοκιμαστική σελίδα (A4)"
-
-#: printer/printerdrake.pm:3711
-#, c-format
-msgid "Photo test page"
-msgstr "Δοκιμαστική σελίδα φωτογραφίας"
-
-#: printer/printerdrake.pm:3715
-#, c-format
-msgid "Do not print any test page"
-msgstr "Χωρίς εκτύπωση δοκιμαστικής σελίδας"
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Εκτύπωση δοκιμαστικών σελίδων..."
-
-#: printer/printerdrake.pm:3743
-#, fuzzy, c-format
-msgid "Skipping photo test page."
-msgstr "Δοκιμαστική σελίδα φωτογραφίας"
-
-#: printer/printerdrake.pm:3760
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Μία ή περισσότερες δοκιμαστικές σελίδες στάλθηκαν στον εκτυπωτή.\n"
-"Μπορεί να περάσει κάποιος χρόνος μέχρι η εκτύπωση να ξεκινήσει.\n"
-"Κατάσταση εκτύπωσης:\n"
-"%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3764
-#, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Μία ή περισσότερες δοκιμαστικές σελίδες στάλθηκαν στον εκτυπωτή.\n"
-"Μπορεί να περάσει κάποιος χρόνος μέχρι η εκτύπωση να ξεκινήσει.\n"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr "Λειτούργησε σωστά;"
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Ακατέργαστος εκτυπωτής"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Για να εκτυπώσετε από τη γραμμή εντολών (παράθυρο τερματικού) μπορείτε να "
-"κάνετε χρήση της εντολής \"%s <αρχείο>\" ή μπορείτε να κάνετε χρήση γραφικού "
-"εργαλείο εκτύπωσης: \"xpp <αρχείο>\" ή \" kprinter <αρχείο>\". Το γραφικό "
-"εργαλείο σας επιτρέπει να αλλάξετε εύκολα τις ρυθμίσεις επιλογών.\n"
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"Τις εντολές αυτές μπορείτε επίσης να τις χρησιμοποιήσετε στο πεδίο \"Εντολή "
-"εκτυπώσεων\" των διαλόγων εκτυπώσεων σε πολλές εφαρμογές, αλλά μην παρέχετε "
-"το όνομα αρχείου εδώ επειδή το αρχείο προς εκτύπωση το παρέχει η εφαρμογή.\n"
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Η εντολή \"%s\" επίσης σας επιτρέπει να τροποποιήσετε τις ρυθμίσεις επιλογών "
-"για μια συγκεκριμένη εργασία εκτύπωσης. Απλά προσθέσετε τις επιθυμητές "
-"ρυθμίσεις στην γραμμή εντολών, π.χ. \"%s<αρχείο>\"."
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-"Για να μάθετε περισσότερα για τις διαθέσιμες εντολές για τον τρέχον εκτυπωτή "
-"διαβάστε την λίστα που φαίνετε παρακάτω ή κάντε κλικ στο \"Εκτύπωση λίστας "
-"επιλογών\"%s%s\n"
-"\n"
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-"Αυτή είναι μια λίστα με τις διαθέσιμες επιλογές εκτύπωσης για τον τρέχον "
-"εκτυπωτή:\n"
-"\n"
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"Για να εκτυπώσετε από τη γραμμή εντολών (παράθυρο τερματικού) κάντε χρήση "
-"της εντολής \"%s <αρχείο>\".\n"
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, fuzzy, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr "Εκτύπωση"
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Για μια λίστα με τις διαθέσιμες εντολές για τον τρέχον εκτυπωτή κάντε κλικ "
-"στο πλήκτρο \"Εκτύπωση λίστας εντολών\"."
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"Για να εκτυπώσετε από τη γραμμή εντολών (παράθυρο τερματικού) κάντε χρήση "
-"της εντολής \"%s <αρχείο>\" ή \"%s<αρχείο>\".\n"
-
-#: printer/printerdrake.pm:3877
-#, fuzzy, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"\n"
-" Εκτυπωτής"
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-"\n"
-" Επίσης οι εντολές \"%s\" και \"%s\" σας επιτρέπουν να ορίσετε τις ρυθμίσεις "
-"επιλογών για μια συγκεκριμένη εργασία εκτύπωσης. Απλά προσθέστε τις "
-"επιθυμητές ρυθμίσεις από την γραμμή εντολών, π.χ. \"%s <αρχείο>\".\n"
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Εκτύπωση/Σάρωση/Κάρτες Φωτογραφιών στο\"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Εκτύπωση/Σάρωση στο \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Εκτύπωση/Πρόσβαση Κάρτας Φωτογραφιών στο \"%s\""
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Εκτύπωση στον εκτυπωτή \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Εκτύπωση στον εκτυπωτή \"%s\""
-
-#: printer/printerdrake.pm:3903
-#, c-format
-msgid "Print option list"
-msgstr "Εκτύπωση λίστα επιλογών"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, fuzzy, c-format
-msgid " - Print head alignment\n"
-msgstr "Οριζόντια στοίχιση:"
-
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "Ρύθμιση χρωμάτων"
-
-#: printer/printerdrake.pm:3959
-#, fuzzy, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-"συσκευή\n"
-"\n"
-" Ολοκληρώθηκε συσκευή!"
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"Ο εκτυπωτής ρυθμίστηκε αυτόματα για πρόσβαση στις κάρτες αποθήκευσης "
-"φωτογραφιών του από τον υπολογιστή σας. Μπορείτε να έχετε πρόσβαση σε αυτές "
-"χρησιμοποιώντας το γραφικό πρόγραμμα \"MtoolsFM\" (Μενού: \"Εφαρμογές\" -> "
-"\"Εργαλεία Αρχείων\" -> \"MTools File Manager\") ή την εντολή \"mtools"
-"\" (για περισσότερες πληροφορίες πληκτρολογήστε \"man mtools\" στη γραμμή "
-"εντολών). Θα βρείτε τις φωτογραφίες σας στον δίσκο \"p:\", ή σε δίσκους με "
-"τα επόμενα γράμματα αν έχετε περισσότερους από έναν εκτυπωτές HP με κάρτες "
-"αποθήκευσης φωτογραφιών. Σε αυτήν την περίπτωση, στο πρόγραμμα \"MtoolsFM\" "
-"μπορείτε να επιλέξετε μεταξύ των διαθέσιμων γραμμάτων δίσκου με το πεδίο "
-"στην άνω δεξιά γωνία του καταλόγου αρχείων."
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, c-format
-msgid "Transfer printer configuration"
-msgstr "Μεταφορά ρυθμίσεων εκτυπωτή"
-
-#: printer/printerdrake.pm:4029
-#, fuzzy, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr "Ολοκληρώθηκε Όλα εξ' ορισμού\n"
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"Το PDQ υποστηρίζει μόνο τοπικούς εκτυπωτές, Απομακρυσμένος εκτυπωτές LPD και "
-"εκτυπωτές Sockete/TCP.\n"
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "Το LPD και το LPRng δεν υποστηρίζουν εκτυπωτές IPP.\n"
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-"Επίσης εργασίες που δεν δημιουργήθηκαν με αυτό το πρόγραμμα ή το \"foomatic-"
-"configure\" δεν μπορούν να μεταφερθούν."
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Επίσης εκτυπωτές που έχουν ρυθμιστεί με αρχεία PPD που παρέχονται από τους "
-"κατασκευαστές τους ή με τοπικούς οδηγούς CUPS δεν μπορούν να μεταφερθούν."
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-"\n"
-"Επιλέξτε τους εκτυπωτές που θέλετε να μεταφέρετε και κάντε\n"
-"κλικ στο \"Μεταφορά\"."
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Χωρίς μεταφορά εκτυπωτών"
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr "Μεταφορά"
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-"Ένας εκτυπωτής με το όνομα \"%s\" υπάρχει ήδη στο %s\n"
-"Κάντε κλικ στο \"Μεταφορά\" για να τον επικαλύψετε.\n"
-"Επίσης μπορείτε να του δώσετε ένα νέο όνομα ή να τον παραβλέψετε ."
-
-#: printer/printerdrake.pm:4077
-#, c-format
-msgid "New printer name"
-msgstr "Κανένα όνομα εκτυπωτή"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr "Μεταφέρεται ο %s..."
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-"'Έχετε μεταφέρει τον πρώην προεπιλεγμένο εκτυπωτής σας (\"%s\"), Να είναι ο "
-"προεπιλεγμένος εκτυπωτής και στο νέο νέο σύστημα εκτύπωσης %s;"
-
-#: printer/printerdrake.pm:4101
-#, c-format
-msgid "Refreshing printer data..."
-msgstr "Ανανέωση δεδομένων εκτυπωτή..."
-
-#: printer/printerdrake.pm:4111
-#, c-format
-msgid "Starting network..."
-msgstr "Εκκίνηση δικτύου..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, c-format
-msgid "Configure the network now"
-msgstr "Ρύθμιση δικτύου τώρα"
-
-#: printer/printerdrake.pm:4156
-#, c-format
-msgid "Network functionality not configured"
-msgstr "Η λειτουργικότητα του δικτύου δεν ρυθμίστηκε"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"Θα ρυθμίσετε έναν απομακρυσμένο εκτυπωτή. Αυτό απαιτεί ένα προσβάσιμο "
-"δίκτυο, αλλά το δίκτυο δεν έχει ρυθμιστεί ακόμα. Αν συνεχίσετε χωρίς να "
-"ρυθμίσετε το δίκτυο δεν θα μπορέσετε να κάνετε χρήση του εκτυπωτή που "
-"ρυθμίζετε. Τι θέλετε να κάνετε;"
-
-#: printer/printerdrake.pm:4160
-#, c-format
-msgid "Go on without configuring the network"
-msgstr "Συνέχιση χωρίς την ρύθμιση του δικτύου"
-
-#: printer/printerdrake.pm:4195
-#, fuzzy, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-"Η ρύθμιση δικτύου που έγινε κατά τη διάρκεια της εγκατάστασης δεν ήταν "
-"δυνατόν να εκκινηθεί. Παρακαλώ ελέγξτε εάν το δίκτυο είναι προσβάσιμο μετά "
-"την εκκίνηση και διορθώστε τις ρυθμίσεις με την χρήση του Κέντρου Ελέγχου "
-"της Mandriva, στο τμήμα \"Δίκτυο & Διαδίκτυο\" / \"Σύνδεση\" και μετά "
-"ρυθμίστε τον εκτυπωτή επίσης με το Κέντρο Ελέγχου Mandriva στο τμήμα \"Υλικό"
-"\"/\"Εκτυπωτής\""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-"Η πρόσβαση δικτύου δεν εκτελείτο και δεν μπόρεσε να εκκινηθεί. Παρακαλώ "
-"ελέγξτε την ρύθμιση του υλικού σας. Μετά προσπαθήστε να ρυθμίσετε τον "
-"απομακρυσμένο εκτυπωτή σας."
-
-#: printer/printerdrake.pm:4206
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Επανεκκίνηση του συστήματος εκτύπωσης..."
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "high"
-msgstr "Υψηλό"
-
-#: printer/printerdrake.pm:4237
-#, c-format
-msgid "paranoid"
-msgstr "Παρανοϊκό"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Εγκατάσταση συστήματος εκτύπωσης στο επίπεδο ασφάλειας %s"
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"Πρόκειται να εγκαταστήσετε το σύστημα εκτύπωσης %s σε ένα σύστημα που έχει "
-"επίπεδο ασφαλείας %s\n"
-"\n"
-"Αυτό το σύστημα εκτύπωσης εκτελεί έναν δαίμονα (διεργασία στο φόντο) που "
-"περιμένει τις εργασίες εκτύπωσης και τις διαχειρίζεται. Αυτός ο δαίμονας "
-"είναι επίσης προσβάσιμος από ένα απομακρυσμένο μηχάνημα από το δίκτυο και "
-"επίσης είναι ένα εν δυνάμει σημείο επίθεσης. Για αυτό ένας περιορισμένος "
-"αριθμός δαιμόνων ξεκινά εξ ορισμού σε αυτό το επίπεδο ασφαλείας.\n"
-"\n"
-"Είστε βέβαιοι ότι θέλετε να ρυθμίσετε την εκτύπωση σε αυτό το μηχάνημα;"
-
-#: printer/printerdrake.pm:4276
-#, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Εκκίνηση του συστήματος εκτύπωσης κατά την εκκίνηση"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Το σύστημα εκτύπωσης (%s) δεν θα ξεκινά αυτόματα κατά την εκκίνηση του "
-"μηχανήματος\n"
-"\n"
-"Υπάρχει η πιθανότητα να έχει απενεργοποιηθεί η αυτόματη εκκίνηση με την "
-"αλλαγή σε υψηλότερο επίπεδο ασφαλείας, επειδή το σύστημα εκτύπωσης είναι ένα "
-"εν δυνάμει σημείο επίθεσης\n"
-"\n"
-"Θέλετε να ξαναενεργοποιηθεί η αυτόματη εκκίνηση του συστήματος εκτύπωσης;"
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr "'Έλεγχος εγκατεστημένων προγραμμάτων..."
-
-#: printer/printerdrake.pm:4306
-#, c-format
-msgid "Removing %s..."
-msgstr "Αφαιρείται ο %s..."
-
-#: printer/printerdrake.pm:4310
-#, fuzzy, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Αλλαγή συστήματος εκτύπωσης"
-
-#: printer/printerdrake.pm:4330
-#, c-format
-msgid "Installing %s..."
-msgstr "Εγκατάσταση %s ..."
-
-#: printer/printerdrake.pm:4334
-#, fuzzy, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Αλλαγή συστήματος εκτύπωσης"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#: printer/printerdrake.pm:4418
-#, fuzzy, c-format
-msgid "Name or IP of remote server:"
-msgstr "Απομακρυσμένος εκτυπωτής σε εξυπηρετητή lpd"
-
-#: printer/printerdrake.pm:4438
-#, c-format
-msgid "Setting Default Printer..."
-msgstr "Ορισμός Προεπιλεγμένου Εκτυπωτή..."
-
-#: printer/printerdrake.pm:4458
-#, fuzzy, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Απομακρυσμένος εκτυπωτής σε εξυπηρετητή CUPS"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, fuzzy, c-format
-msgid "Local CUPS printing system"
-msgstr "Αλλαγή συστήματος εκτύπωσης"
-
-#: printer/printerdrake.pm:4526
-#, c-format
-msgid "Select Printer Spooler"
-msgstr "Επιλογή Spooler Εκτυπωτή"
-
-#: printer/printerdrake.pm:4527
-#, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Ποιο σύστημα εκτύπωσης θέλετε να χρησιμοποιήσετε;"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Απέτυχε η ρύθμιση του εκτυπωτή \"%s\"!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Εγκατάσταση Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr ""
-
-#: printer/printerdrake.pm:4789
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Oι παρακάτω εκτυπωτές έχουν ρυθμιστεί. Κάντε διπλό κλικ σε έναν εκτυπωτή για "
-"να αλλάξετε τις ρυθμίσεις του, να τον ορίσετε ως προεπιλεγμένο ή για να "
-"προβάλετε πληροφορίες για αυτόν."
-
-#: printer/printerdrake.pm:4819
-#, fuzzy, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-"Ανανέωση λίστας εκτυπωτών ( για να εμφανίσει όλους τους διαθέσιμους "
-"απομακρυσμένους εκτυπωτές)"
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-"Ανανέωση λίστας εκτυπωτών ( για να εμφανίσει όλους τους διαθέσιμους "
-"απομακρυσμένους εκτυπωτές)"
-
-#: printer/printerdrake.pm:4831
-#, c-format
-msgid "CUPS configuration"
-msgstr "Ρύθμιση CUPS"
-
-#: printer/printerdrake.pm:4843
-#, c-format
-msgid "Change the printing system"
-msgstr "Αλλαγή συστήματος εκτύπωσης"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Κανονική Κατάσταση"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Για Προχωρημένους"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Επιλογές εκτυπωτή"
-
-#: printer/printerdrake.pm:5158
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Αλλαγή ρυθμίσεων εκτυπωτή"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Εκτυπωτής  %s%s\n"
-"Τι θέλετε να αλλάξετε σε αυτόν τον εκτυπωτή;"
-
-#: printer/printerdrake.pm:5165
-#, fuzzy, c-format
-msgid "This printer is disabled"
-msgstr "Αυτή η κατάτμηση δεν μπορεί ν' αλλάξει μέγεθος."
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr "Καν' το!"
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, c-format
-msgid "Printer connection type"
-msgstr "Τύπο σύνδεση εκτυπωτή"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, c-format
-msgid "Printer name, description, location"
-msgstr "Όνομα εκτυπωτή, περιγραφή, θέση"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Κατασκευαστή εκτυπωτή, μοντέλο, οδηγό"
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr "Κατασκευαστή εκτυπωτή, μοντέλο"
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr "Ορισμός αυτού του εκτυπωτή ως προεπιλεγμένου"
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, fuzzy, c-format
-msgid "Enable Printer"
-msgstr "Ενεργοποίηση Εξυπηρετητή"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, fuzzy, c-format
-msgid "Disable Printer"
-msgstr "Απενεργοποίηση Εξυπηρετητή"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, c-format
-msgid "Print test pages"
-msgstr "Εκτύπωση δοκιμαστικών σελίδων"
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, c-format
-msgid "Learn how to use this printer"
-msgstr "Μάθετε πως να χειρισθείτε αυτόν τον εκτυπωτή"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, c-format
-msgid "Remove printer"
-msgstr "Αφαίρεση εκτυπωτή"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Αφαίρεση παλαιού εκτυπωτή  \"%s\"..."
-
-#: printer/printerdrake.pm:5272
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Εκτυπωτής \"%s\"στον εξυπηρετητή \"%s\""
-
-#: printer/printerdrake.pm:5277
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Η Κοινή Σύνδεση Διαδικτύου τώρα απενεργοποιήθηκε."
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Είστε βέβαιοι για την αφαίρεση του εκτυπωτή \"%s\";"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Γίνεται αφαίρεση του εκτυπωτή \"%s\"..."
-
-#: printer/printerdrake.pm:5342
-#, c-format
-msgid "Default printer"
-msgstr "Προεπιλεγμένος εκτυπωτής"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Ο εκτυπωτής  \"%s\" είναι πλέον ο προεπιλεγμένος εκτυπωτής."
-
-#: raid.pm:42
-#, fuzzy, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Δεν μπορώ να προσθέσω κατάτμηση στο _μορφοποιημένο_ RAID md%d"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Δεν υπάρχουν αρκετές κατατμήσεις για RAID επιπέδου %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr ""
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr ""
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-
-#: security/help.pm:11
-#, fuzzy, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"\n"
-"\n"
-" Αποδοχή Άρνηση."
-
-#: security/help.pm:13
-#, fuzzy, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"\n"
-"\n"
-" Αποδοχή Άρνηση."
-
-#: security/help.pm:15
-#, fuzzy, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr ""
-"\n"
-"\n"
-" Αποδοχή Άρνηση."
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr ""
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-
-#: security/help.pm:27
-#, fuzzy, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr ""
-"\n"
-"\n"
-" χρήστης."
-
-#: security/help.pm:29
-#, fuzzy, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Όλα τα απομακρυσμένα μηχανήματα"
-
-#: security/help.pm:31
-#, fuzzy, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Όλα τα απομακρυσμένα μηχανήματα"
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, fuzzy, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-"\n"
-"\n"
-" Ολοκληρώθηκε\n"
-"\n"
-"."
-
-#: security/help.pm:48
-#, fuzzy, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" εξυπηρετητής."
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, fuzzy, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" κανένα\n"
-"."
-
-#: security/help.pm:63
-#, fuzzy, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-"\n"
-"\n"
-"\n"
-" εξυπηρετητής\n"
-" εξυπηρετητής<SERVER_LEVEL> εξυπηρετητής\n"
-"\n"
-"."
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-
-#: security/help.pm:80 standalone/draksec:213
-#, c-format
-msgid "Security Alerts:"
-msgstr "Ειδοποιήσεις Ασφαλείας:"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr ""
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-
-#: security/help.pm:88
-#, fuzzy, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr ""
-"\n"
-"\n"
-" ωριαία."
-
-#: security/help.pm:90
-#, fuzzy, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"\n"
-"\n"
-" Ομάδα εργασίας: χρήστης."
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr ""
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: security/help.pm:96
-#, fuzzy, c-format
-msgid " Activate/Disable daily security check."
-msgstr ""
-"\n"
-"\n"
-" καθημερινά."
-
-#: security/help.pm:98
-#, fuzzy, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"\n"
-"\n"
-" χρήστης επίπεδο."
-
-#: security/help.pm:100
-#, fuzzy, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"\n"
-"\n"
-" Προσθήκη."
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-
-#: security/help.pm:108
-#, fuzzy, c-format
-msgid "Set the root umask."
-msgstr "Κωδικός Root"
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr "αν οριστεί ναι, έλεγχος για ανοιχτές θύρες."
-
-#: security/help.pm:110
-#, fuzzy, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-"αν οριστεί ναι, έλεγχος για κενούς κωδικούς πρόσβασης, για κανέναν κωδικό "
-"πρόσβασης στο /etc/shadow και για χρήστες με id 0 εκτός από τον root."
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-"αν οριστεί ναι, έλεγχος δικαιωμάτων των αρχείων στον αρχικό κατάλογο χρήστη."
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-"αν οριστεί ναι, έλεγχος των συσκευών δικτύου για αδιάκριτη κατάσταση "
-"λειτουργίας."
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "αν οριστεί ναι, εκτέλεση ελέγχων ασφαλείας καθημερινά."
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "αν οριστεί ναι, έλεγχος για προσθήκη/αφαίρεση αρχείων sgid."
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "αν οριστεί ναι, έλεγχος κενών κωδικών πρόσβασης στο /etc/shadow."
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "αν οριστεί ναι, επαλήθευση checksum για τα αρχεία suid/sgid."
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "αν οριστεί ναι, έλεγχος για προθέσεις/αφαιρέσεις αρχείων suid root."
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr "αν οριστεί ναι, αναφορά άγνωστων αρχείων."
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "αν οριστεί ναι, έλεγχος των αρχείων/καταλόγων για εγγραφή από όλους."
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "αν οριστεί ναι, εκτέλεση ελέγχων chkrootkit"
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"αν ναι, αποστολή της αναφοράς ταχυδρομείου σε αυτήν την διεύθυνση ή αλλιώς "
-"στον root."
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου μέσω ταχυδρομείου."
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr ""
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "αν οριστεί ναι, έλεγχος της βάσης δεδομένων rpm."
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου στο syslog."
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου στο tty"
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr ""
-
-#: security/help.pm:138
-#, fuzzy, c-format
-msgid "Set the user umask."
-msgstr ""
-"\n"
-"\n"
-" χρήστης."
-
-#: security/l10n.pm:11
-#, fuzzy, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr ""
-"\n"
-"\n"
-" Αποδοχή Άρνηση."
-
-#: security/l10n.pm:12
-#, fuzzy, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr ""
-"\n"
-"\n"
-" Αποδοχή Άρνηση."
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr ""
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr ""
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
-
-#: security/l10n.pm:17
-#, fuzzy, c-format
-msgid "Allow remote root login"
-msgstr "Όλα τα απομακρυσμένα μηχανήματα"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr ""
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, fuzzy, c-format
-msgid "Allow X Window connections"
-msgstr "Σύνδεση Winmodem"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr ""
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr ""
-
-#: security/l10n.pm:24
-#, fuzzy, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Ρύθμιση υπηρεσιών"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr ""
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr ""
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr ""
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr ""
-
-#: security/l10n.pm:31
-#, fuzzy, c-format
-msgid "Enable msec hourly security check"
-msgstr ""
-"\n"
-"\n"
-" ωριαία."
-
-#: security/l10n.pm:32
-#, fuzzy, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-"\n"
-"\n"
-" Ομάδα εργασίας: χρήστης."
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr ""
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr ""
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr ""
-
-#: security/l10n.pm:36
-#, fuzzy, c-format
-msgid "Sulogin(8) in single user level"
-msgstr ""
-"\n"
-"\n"
-" χρήστης επίπεδο."
-
-#: security/l10n.pm:37
-#, fuzzy, c-format
-msgid "No password aging for"
-msgstr "Χωρίς κωδικό πρόσβασης"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-
-#: security/l10n.pm:39
-#, fuzzy, c-format
-msgid "Password history length"
-msgstr "Ο κωδικός πρόσβασης είναι πολύ απλός"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr ""
-
-#: security/l10n.pm:41
-#, fuzzy, c-format
-msgid "Root umask"
-msgstr "Κωδικός Root"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr ""
-
-#: security/l10n.pm:43
-#, fuzzy, c-format
-msgid "Shell timeout"
-msgstr "Τέλος Χρόνου Εκκίνησης Πυρήνα"
-
-#: security/l10n.pm:44
-#, fuzzy, c-format
-msgid "User umask"
-msgstr "Χρήστες"
-
-#: security/l10n.pm:45
-#, fuzzy, c-format
-msgid "Check open ports"
-msgstr "ανιχνεύθηκε στην πόρτα %s"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr ""
-
-#: security/l10n.pm:47
-#, fuzzy, c-format
-msgid "Check permissions of files in the users' home"
-msgstr ""
-"αν οριστεί ναι, έλεγχος δικαιωμάτων των αρχείων στον αρχικό κατάλογο χρήστη."
-
-#: security/l10n.pm:48
-#, fuzzy, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr ""
-"αν οριστεί ναι, έλεγχος των συσκευών δικτύου για αδιάκριτη κατάσταση "
-"λειτουργίας."
-
-#: security/l10n.pm:49
-#, fuzzy, c-format
-msgid "Run the daily security checks"
-msgstr "αν οριστεί ναι, εκτέλεση ελέγχων ασφαλείας καθημερινά."
-
-#: security/l10n.pm:50
-#, fuzzy, c-format
-msgid "Check additions/removals of sgid files"
-msgstr "αν οριστεί ναι, έλεγχος για προσθήκη/αφαίρεση αρχείων sgid."
-
-#: security/l10n.pm:51
-#, fuzzy, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr "αν οριστεί ναι, έλεγχος κενών κωδικών πρόσβασης στο /etc/shadow."
-
-#: security/l10n.pm:52
-#, fuzzy, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr "αν οριστεί ναι, επαλήθευση checksum για τα αρχεία suid/sgid."
-
-#: security/l10n.pm:53
-#, fuzzy, c-format
-msgid "Check additions/removals of suid root files"
-msgstr "αν οριστεί ναι, έλεγχος για προθέσεις/αφαιρέσεις αρχείων suid root."
-
-#: security/l10n.pm:54
-#, fuzzy, c-format
-msgid "Report unowned files"
-msgstr "αν οριστεί ναι, αναφορά άγνωστων αρχείων."
-
-#: security/l10n.pm:55
-#, fuzzy, c-format
-msgid "Check files/directories writable by everybody"
-msgstr "αν οριστεί ναι, έλεγχος των αρχείων/καταλόγων για εγγραφή από όλους."
-
-#: security/l10n.pm:56
-#, fuzzy, c-format
-msgid "Run chkrootkit checks"
-msgstr "αν οριστεί ναι, εκτέλεση ελέγχων chkrootkit"
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr ""
-
-#: security/l10n.pm:58
-#, fuzzy, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-"αν ναι, αποστολή της αναφοράς ταχυδρομείου σε αυτήν την διεύθυνση ή αλλιώς "
-"στον root."
-
-#: security/l10n.pm:59
-#, fuzzy, c-format
-msgid "Report check result by mail"
-msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου μέσω ταχυδρομείου."
-
-#: security/l10n.pm:60
-#, fuzzy, c-format
-msgid "Run some checks against the rpm database"
-msgstr "αν οριστεί ναι, έλεγχος της βάσης δεδομένων rpm."
-
-#: security/l10n.pm:61
-#, fuzzy, c-format
-msgid "Report check result to syslog"
-msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου στο syslog."
-
-#: security/l10n.pm:62
-#, fuzzy, c-format
-msgid "Reports check result to tty"
-msgstr "αν οριστεί ναι, αποτέλεσμα αναφοράς ελέγχου στο tty"
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Καλώς ορίσατε στους Crackers"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Φτωχό"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Υψηλό"
-
-#: security/level.pm:14
-#, c-format
-msgid "Higher"
-msgstr "Υψηλότερο"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Παρανοϊκό"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Αυτό το επίπεδο πρέπει να χρησιμοποιηθεί με προσοχή. Κάνει το σύστημά σας\n"
-"πιο εύχρηστο, αλλά πολύ ευαίσθητο. Δεν πρέπει να χρησιμοποιηθεί σε σύστημα\n"
-"συνδεδεμένο στο Διαδίκτυο ή LAN. Δεν υπάρχουν κωδικοί πρόσβασης."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Τώρα υπάρχουν κωδικοί πρόσβασης, αλλά η χρήση του συστήματος σε δίκτυο ακόμα "
-"δεν συνίσταται."
-
-#: security/level.pm:45
-#, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Αυτό είναι το συνηθισμένο επίπεδο ασφαλείας για ένα σύστημα που θα συνδεθεί "
-"ως πελάτης στο Διαδίκτυο."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Υπάρχουν ήδη κάποιοι περιορισμοί, και περισσότεροι έλεγχοι εκτελούνται κάθε "
-"βράδυ."
-
-#: security/level.pm:47
-#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Με αυτό το επίπεδο ασφαλείας είναι δυνατή η χρήση του συστήματος στο ως "
-"εξυπηρετητή.\n"
-"Η ασφάλεια είναι αρκετά υψηλή ώστε να δέχεται ταυτόχρονες συνδέσεις από "
-"πολλούς πελάτες.\n"
-"Σημ: Αν το μηχάνημα είναι μόνο για την χρήση ως πελάτη στο Διαδίκτυο τότε "
-"καλύτερα να επιλέξετε χαμηλότερο επίπεδο ασφάλειας"
-
-#: security/level.pm:50
-#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Η ασφάλεια είναι ίδια του προηγούμενου επιπέδου, με το σύστημα τελείως "
-"κλειστό. Η ασφάλεια είναι στο μέγιστο δυνατό."
-
-#: security/level.pm:55
-#, c-format
-msgid "DrakSec Basic Options"
-msgstr "Βασικές Επιλογές DrakSec"
-
-#: security/level.pm:56
-#, c-format
-msgid "Please choose the desired security level"
-msgstr "Επιλέξτε το επιθυμητό επίπεδο ασφαλείας"
-
-#: security/level.pm:60
-#, c-format
-msgid "Security level"
-msgstr "Επίπεδο ασφαλείας"
-
-#: security/level.pm:62
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "Χρήση libsafe για διακομιστές"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Διαχειριστής Ασφαλείας (προσπέλαση ή ταχυδρομείο)"
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Εκκίνηση του ALSA (Advanced Linux Sound Architecture) συστήματος ήχου"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, ένα πρόγραμμα περιοδικής εκτέλεσης εντολών."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"Το apmd παρακολουθεί και καταγράφει την κατάσταση της μπαταρίας.\n"
-"Μπορεί επίσης να χρησιμοποιηθεί για το αυτόματο κλείσιμο του συστήματος σε \n"
-"περίπτωση χαμηλής φόρτισης της μπαταρίας."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Εκτελεί εντολές προγραμματισμένες από την εντολή at και δέσμες εντολών\n"
-"όταν ο φόρτος του συστήματος είναι αρκετά χαμηλός."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"Το cron είναι μια βασική υπηρεσία UNIX που τρέχει εντολές καθορισμένες από \n"
-"τον χρήστη σε τακτά χρονικά διαστήματα. Το vixie cron προσθέτει έναν "
-"αριθμό \n"
-"επιπλέον δυνατοτήτων που περιλαμβάνουν καλύτερη ασφάλεια και πιο ισχυρές "
-"ρυθμίσεις."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"Το GPM προσθέτει υποστήριξη ποντικιού σε εφαρμογές βασισμένες σε κονσόλα\n"
-"κειμένου και επιτρέπει λειτουργίες αποκοπής και επικόλλησης με χρήση \n"
-"ποντικιού στην κονσόλα, καθώς και υποστήριξη αναδυομένων μενού."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"Το HardDrake τρέχει μια ανίχνευση υλικού και προαιρετικά ρυθμίζει\n"
-"το νέο/αλλαγμένο υλικό."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Ο Apache είναι ένας εξυπηρετητής WWW. Μπορεί να εξυπηρετήσει αρχεία\n"
-"HTML και CGI."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Η υπηρεσία υπερεξυπηρετητή Διαδικτύου (inetd) ξεκινάει μια ποικιλία\n"
-"άλλων υπηρεσιών διαδικτύου όποτε χρειάζονται. Είναι υπεύθυνη για την \n"
-"εκκίνηση πολλών υπηρεσιών, όπως telnet, ftp, rsh και rlogin. Η "
-"απενεργοποίηση\n"
-"αυτής της υπηρεσίας απενεργοποιηθεί επίσης και τις υπηρεσίες για τις οποίες\n"
-"είναι υπεύθυνη."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Εκκίνηση πακέτου φίλτρου για τον πυρήνα Linux της σειράς 2.2, για την "
-"ρύθμιση\n"
-"ενός Τοίχους Προστασίας που θα προστατεύει το μηχάνημά σας από δικτυακές "
-"επιθέσεις."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Αυτό το πακέτο φορτώνει την επιλεγμένη διάταξη πληκτρολογίου που έχει \n"
-"επιλεγεί στο /etc/sysconfig/keyboard. Αυτό μπορεί να ρυθμιστεί με την \n"
-"χρήση του εργαλείου kbdconfig. Πρέπει σχεδόν πάντα να είναι ενεργοποιημένο."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Αυτόματη παραγωγή της επικεφαλίδας του πυρήνα στο /boot για το\n"
-"/usr/include/linux/{autoconf,version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
-"Αυτόματη ανίχνευση και ρύθμιση συσκευών κατά την εκκίνηση του συστήματος."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Το Linuxconf καμιά φορά κάνει διάφορες εργασίες\n"
-"κατά την εκκίνηση του συστήματος για να διατηρήσει τη ρύθμιση του συστήματος."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"Το lpd είναι η υπηρεσία εκτυπώσεων που απαιτείται για να λειτουργεί \n"
-"η εντολή lpd. Είναι βασικά ένας εξυπηρετητής που προωθεί τα αρχεία \n"
-"στους εκτυπωτές."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, χρησιμοποιείται για να δημιουργήσει έναν υψηλής\n"
-"απόδοσης και διαθεσιμότητας εξυπηρετητή."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"Ο named (BIND) είναι ένας Εξυπηρετητής Ονόματος Τομέα (DNS) που "
-"χρησιμοποιείται\n"
-"για να μετατρέπει ονόματα σε διευθύνσεις IP."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Συνδέει και αποσυνδέει όλα τα δικτυακά συστήματα αρχείων (NFS), SMB (Lan\n"
-"Manager/Windows), και NCP (NetWare) "
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ενεργοποιεί/απενεργοποιεί όλα τα υποσυστήματα δικτύου που έχουν \n"
-"ρυθμιστεί να ξεκινούν κατά την εκκίνηση."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"Το NFS είναι ένα δημοφιλές πρωτόκολλο για τον διαμοιρασμό αρχείων σε \n"
-"δίκτυα TCP/IP. Αυτή η υπηρεσία προσφέρει λειτουργίες εξυπηρετητή, ο \n"
-"οποίος ρυθμίζεται από το αρχείο /etc/exports."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"Το NFS είναι ένα δημοφιλές πρωτόκολλο για τον διαμοιρασμό αρχείων σε \n"
-"δίκτυα TCP/IP. Αυτή η υπηρεσία προσφέρει λειτουργίες κλειδώματος αρχείων."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-"Αυτόματη ενεργοποίηση του numlock πλήκτρου στην κονσόλα\n"
-"και το Xorg κατά την εκκίνηση του συστήματος."
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Υποστήριξη των OKI 4w και συμβατών winprinters."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"Η υποστήριξη PCMCIA προσφέρει υποστήριξη για κάρτες δικτύου, μόντεμ κλπ \n"
-"συνήθως σε συστήματα laptop. Δεν θα εκκινήσει εκτός αν αυτό ζητηθεί από "
-"τον \n"
-"χρήστη, οπότε είναι ασφαλές να εγκατασταθεί σε συστήματα που δεν το "
-"χρειάζονται."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"Ο portmapper διαχειρίζεται συνδέσεις RPC, οι οποίες χρησιμοποιούνται\n"
-"από πρωτόκολλα όπως το NFS και το NIS. Πρέπει να είναι ενεργοποιημένο σε \n"
-"συστήματα που δρουν ως εξυπηρετητές τέτοιων πρωτοκόλλων."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Το postfix είναι ένα πρόγραμμα μεταφοράς αλληλογραφίας, το \n"
-"πρόγραμμα που φροντίζει για την μεταφορά αλληλογραφίας από το \n"
-"ένα σύστημα στο άλλο."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Αποθηκεύει και επαναφέρει την πηγή εντροπίας του συστήματος για \n"
-"την δημιουργία καλύτερης ποιότητας τυχαίων αριθμών."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Ορισμός raw συσκευών ως block συσκευών (όπως κατατμήσεις σκληρών\n"
-"δίσκων), για τη χρήση τους από εφαρμογές όπως η Oracle ή συσκευές DVD"
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Η υπηρεσία routed επιτρέπει την αυτόματη ενημέρωση του πίνακα δρομολόγησης \n"
-"IP μέσω του πρωτοκόλλου RIP. Παρ' όλο που το RIP είναι ευρέως διαδεδομένο "
-"σε \n"
-"μικρά δίκτυα, μεγαλύτερα δίκτυα απαιτούν περιπλοκότερα πρωτόκολλα."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Το πρωτόκολλο rstat επιτρέπει στους χρήστες ενός δικτύου την\n"
-"συλλογή μετρήσεων επιδόσεων για οποιοδήποτε σύστημα σε αυτό \n"
-"το δίκτυο."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"Το πρωτόκολλο rusers επιτρέπει στους χρήστες ενός δικτύου να \n"
-"προσδιορίσουν τους συνδεδεμένους χρήστες άλλων συστημάτων."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"Το πρωτόκολλο rwho επιτρέπει σε απομακρυσμένους χρήστες να δουν έναν \n"
-"κατάλογο των χρηστών του συστήματος (παρόμοιο με το finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Εκκίνηση του συστήματος ήχου στο μηχάνημά σας"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Το Syslog είναι η υπηρεσία που χρησιμοποιούν πολλές άλλες υπηρεσίες \n"
-"για να κάνουν εγγραφές στα αρχεία παρακολούθησης συστήματος (log files)\n"
-"Συνίσταται η συνεχής λειτουργία αυτής της υπηρεσίας."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Φόρτωση των οδηγών για τις usb συσκευές σας."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr ""
-"Ξεκινάει την υπηρεσία εξυπηρετητή γραμματοσειρών X (αυτό είναι απαραίτητο "
-"για να εκτελεστεί το Xorg)."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Επιλέξτε τις υπηρεσίες που θα ξεκινούν αυτόματα κατά την εκκίνηση"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Εκτύπωση"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Διαδίκτυο"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Κοινόχρηστα αρχεία"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Απομακρυσμένη διαχείριση"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Εξυπηρετητής Βάσης Δεδομένων"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "εκτελείται"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "δεν εκτελείται"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Υπηρεσίες και δαίμονες"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Χωρίς επιπλέον πληροφορίες\n"
-"για αυτή την υπηρεσία."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Πληροφορίες"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr ""
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "Στην εκκίνηση"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Εκκίνηση"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Τερματισμός"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr ""
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Καλώς Ορίσατε στο <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-
-#: share/advertising/02.pl:13
-#, fuzzy, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Διακομιστές</b>"
-
-#: share/advertising/02.pl:15
-#, fuzzy, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Καλώς ορίσατε στον κόσμο του Ανοιχτού Κώδικα"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr ""
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr ""
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr ""
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "Κέντρο Ελέγχου Mandriva Linux"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr ""
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr ""
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr ""
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, fuzzy, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "Επιλέξτε το κλειδί κρυπτογράφησης του συστήματος αρχείων"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, fuzzy, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr "OpenOffice.org Math"
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Kontact</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Περιήγηση στο Διαδίκτυο</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr ""
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, fuzzy, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "Μεταφορά Αρχείων με FTP"
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr ""
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr ""
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr ""
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr ""
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Περιβάλλοντα ανάπτυξης</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Editors</b>"
-msgstr "Ανάπτυξη"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-
-#: share/advertising/21.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Languages</b>"
-msgstr "Ανάπτυξη"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, fuzzy, c-format
-msgid "\t* Scripting languages:"
-msgstr "Διαχειριστής Εκτυπώσεων"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr ""
-
-#: share/advertising/22.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Tools</b>"
-msgstr "Ανάπτυξη"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, fuzzy, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Διακομιστές</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, fuzzy, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr "Στείλτε και λάβετε μηνύματα WinPopup"
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Διακομιστές</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-
-#: share/advertising/24.pl:19
-#, fuzzy, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr "Εξυπηρετητής Apache World Wide Web"
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Κέντρο Ελέγχου Mandriva Linux</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr ""
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, fuzzy, c-format
-msgid "<b>Online Store</b>"
-msgstr "Κέντρο Ελέγχου Mandriva Linux"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr ""
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr ""
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Σταθμός Εργασίας Γραφείου"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-"Εργαλεία γραφείου: Επεξεργαστές κειμένου(OpenOffice.org Writer, Kword), "
-"λογιστικά φύλλα (OpenOffice.org Calc, Kspread), αρχεία pdf κλπ"
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-"Εργαλεία γραφείου: Επεξεργαστές κειμένου(kword, abiword), λογιστικά φύλλα "
-"(kspread, gnumeric), αρχεία pdf κλπ"
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Σταθμός παιχνιδιών"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr "Διασκέδαση (παιχνίδια)"
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Σταθμός πολυμέσων"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr "Προγράμματα αναπαραγωγής και διαχείρισης video και ήχου"
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Σταθμός Διαδικτύου"
-
-#: share/compssUsers.pl:44
-#, fuzzy, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-"Εργαλεία για αποστολή και λήψη αλληλογραφίας και ειδήσεων (pine, mutt, "
-"tin...) και περιήγηση στο Διαδίκτυο"
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Υπολογιστής Δικτύου (πελάτης)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr "Πελάτες για διαφορετικά πρωτόκολλα συμπεριλαμβανομένου του ssh"
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Ρύθμιση"
-
-#: share/compssUsers.pl:55
-#, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Εργαλεία για διευκόλυνση της ρύθμισης του υπολογιστή σας"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Εργαλεία Κονσόλας"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Επεξεργαστές κειμένου, κελύφη, εργαλεία αρχείων, τερματικά"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "Βιβλιοθήκες ανάπτυξης C και C++, προγράμματα και άλλα αρχεία"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Τεκμηρίωση"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr "Βιβλία και οδηγοί για το Linux και το Ελεύθερο Λογισμικό"
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr "Linux Standard Base. Υποστήριξη εφαρμογών τρίτων"
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, fuzzy, c-format
-msgid "Groupware"
-msgstr "oμάδα"
-
-#: share/compssUsers.pl:89
-#, fuzzy, c-format
-msgid "Kolab Server"
-msgstr "Εξυπηρετητής Samba"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr "Τοίχος Προστασίας/Δρομολογητής"
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Πύλη Διαδικτύου"
-
-#: share/compssUsers.pl:96
-#, fuzzy, c-format
-msgid "Mail/News"
-msgstr "/Αρχείο/_Νέο"
-
-#: share/compssUsers.pl:97
-#, fuzzy, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Εξυπηρετητής ταχυδρομείου Postfix"
-
-#: share/compssUsers.pl:100
-#, fuzzy, c-format
-msgid "Directory Server"
-msgstr "Επαναφορά από CD"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "Διακομιστής FTP"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr ""
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Εξυπηρετητής Όνομα Τομέα και Πληροφοριών Δικτύου"
-
-#: share/compssUsers.pl:112
-#, fuzzy, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Εξυπηρετητής Εκτυπώσεων"
-
-#: share/compssUsers.pl:113
-#, fuzzy, c-format
-msgid "NFS Server, Samba server"
-msgstr "Εξυπηρετητής Samba"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Βάση Δεδομένων"
-
-#: share/compssUsers.pl:117
-#, fuzzy, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr "Εξυπηρετητής βάσης δεδομένων PostgreSQL ή MySQL"
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "Web/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Ταχυδρομείο"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Εξυπηρετητής ταχυδρομείου Postfix"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr "Εξυπηρετητής βάσης δεδομένων PostgreSQL ή MySQL"
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Εξυπηρετητής δικτύου"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-"εξυπηρετητής NFS, εξυπηρετητής SMB, εξυπηρετητής Proxy, εξυπηρετητής ssh"
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "Σταθμός εργασίας KDE"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr "Το περιβάλλον γραφείου KDE με μια συλλογή συνοδευτικών εργαλείων"
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Σταθμός Εργασίας Gnome"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr "Γραφικό περιβάλλον με φιλικά εργαλεία και εφαρμογές"
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr "Άλλα γραφικά περιβάλλοντα"
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr "Icewm, Window Maker, Enlightenment, Fvwm, κλπ"
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Εργαλεία"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "Εξυπηρετητής SSH"
-
-#: share/compssUsers.pl:186
-#, fuzzy, c-format
-msgid "Webmin"
-msgstr "Υπηρεσία Webmin"
-
-#: share/compssUsers.pl:187
-#, fuzzy, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Ρύθμιση του Διακομιστή Τερματικού Mandriva"
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Παρακολούθηση Δικτύου"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, fuzzy, c-format
-msgid "Mandriva Wizards"
-msgstr "Κέντρο Ελέγχου Mandriva Linux"
-
-#: share/compssUsers.pl:197
-#, fuzzy, c-format
-msgid "Wizards to configure server"
-msgstr "Απέτυχε η ρύθμιση του εκτυπωτή \"%s\"!"
-
-#: standalone.pm:21
-#, fuzzy, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"\n"
-" Γενικά Άδεια\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Γενικά Άδεια\n"
-"\n"
-" ληφθέντα Γενικά Άδεια\n"
-"\n"
-
-#: standalone.pm:40
-#, fuzzy, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"εξ' ορισμού\n"
-" Επαναφορά\n"
-"\n"
-" εξ' ορισμού εξ' ορισμού\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" κανένα\n"
-"\n"
-"\n"
-"."
-
-#: standalone.pm:84
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"\n"
-" Εξυπηρετητής\n"
-" ενεργοποίηση ενεργοποίηση\n"
-" απενεργοποίηση απενεργοποίηση\n"
-"\n"
-"\n"
-" χρήστης\n"
-" Διαγραφή χρήστης\n"
-"\n"
-" Διαγραφή"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[πληκτρολόγιο]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-
-#: standalone.pm:98
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"\n"
-" Δίκτυο Διαδίκτυο\n"
-"\n"
-" εξ' ορισμού\n"
-"\n"
-"\n"
-" μετά βίας μετά βίας\n"
-"\n"
-"."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Χρήση: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, fuzzy, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Απαιτείται επανεκκίνηση για να εφαρμοστούν οι αλλαγές"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Παρακαλώ αποσυνδεθείτε και μετά πατήστε Ctrl-Alt-BackSpace"
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr ""
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr ""
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr ""
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, fuzzy, c-format
-msgid "Terminal Server Configuration"
-msgstr "Ρύθμιση του Διακομιστή Τερματικού Mandriva"
-
-#: standalone/drakTermServ:221
-#, c-format
-msgid "Enable Server"
-msgstr "Ενεργοποίηση Εξυπηρετητή"
-
-#: standalone/drakTermServ:227
-#, c-format
-msgid "Disable Server"
-msgstr "Απενεργοποίηση Εξυπηρετητή"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Εκκίνηση Εξυπηρετητής"
-
-#: standalone/drakTermServ:239
-#, c-format
-msgid "Stop Server"
-msgstr "Τερματισμός Εξυπηρετητή"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr "Εικόνες Net Boot"
-
-#: standalone/drakTermServ:259
-#, c-format
-msgid "Add/Del Users"
-msgstr "Προσθήκη/Αφαίρεση Χρηστών"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr "Προσθήκη/Αφαίρεση Πελατών"
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Εικόνες"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "Οδηγός Πρώτης Φοράς"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, fuzzy, c-format
-msgid "Cancel Wizard"
-msgstr "Κάντε κλικ εδώ για να ξεκινήσει ο οδηγός ->"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, fuzzy, c-format
-msgid "Use thin clients."
-msgstr "Προσθήκη/Αφαίρεση Πελατών"
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr ""
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Αυτό θα διαρκέσει μερικά λεπτά."
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, fuzzy, c-format
-msgid "Done!"
-msgstr "Ολοκληρώθηκε"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, fuzzy, c-format
-msgid "Terminal Server Overview"
-msgstr "Ρύθμιση του Διακομιστή Τερματικού Mandriva"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr "Δισκέτα Εκκίνησης"
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr "Εκκίνηση ISO"
-
-#: standalone/drakTermServ:670
-#, fuzzy, c-format
-msgid "PXE Image"
-msgstr "Εικόνα"
-
-#: standalone/drakTermServ:731
-#, fuzzy, c-format
-msgid "Default kernel version"
-msgstr "έκδοση πυρήνα"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Δημιουργία Ολόκληρου Πυρήνα -->"
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr "Δεν επιλέχτηκε πυρήνας!"
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr "Δημιουργία Μονού NIC -->"
-
-#: standalone/drakTermServ:778
-#, c-format
-msgid "No NIC selected!"
-msgstr "Δε επιλέχτηκε NIC!"
-
-#: standalone/drakTermServ:781
-#, fuzzy, c-format
-msgid "Build All Kernels -->"
-msgstr "Όλα"
-
-#: standalone/drakTermServ:796
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Διαγραφή"
-
-#: standalone/drakTermServ:801
-#, fuzzy, c-format
-msgid "No image selected!"
-msgstr "Δε επιλέχτηκε NIC!"
-
-#: standalone/drakTermServ:804
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Διαγραφή Όλων των NBIs"
-
-#: standalone/drakTermServ:933
-#, fuzzy, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"\n"
-" Εξυπηρετητής\n"
-" Διαγραφή χρήστης Εξυπηρετητής ενεργοποίηση."
-
-#: standalone/drakTermServ:938
-#, c-format
-msgid "Add User -->"
-msgstr "Προσθήκη χρήστη -->"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr "<-- Διαγραφή Χρήστη"
-
-#: standalone/drakTermServ:980
-#, c-format
-msgid "type: %s"
-msgstr "τύπος: %s"
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr ""
-
-#: standalone/drakTermServ:1014
-#, fuzzy, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr "Αυτόματη επαναρύθμισης"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr "Δεν δημιουργήθηκαν εικόνες εκκίνησης δικτύου!"
-
-#: standalone/drakTermServ:1042
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "Πελάτης DHCP"
-
-#: standalone/drakTermServ:1046
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "Προσθήκη/Αφαίρεση Πελατών"
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr "Προσθήκη Πελάτη -->"
-
-#: standalone/drakTermServ:1062
-#, fuzzy, c-format
-msgid "type: fat"
-msgstr "τύπος: %s"
-
-#: standalone/drakTermServ:1063
-#, fuzzy, c-format
-msgid "type: thin"
-msgstr "τύπος: %s"
-
-#: standalone/drakTermServ:1070
-#, fuzzy, c-format
-msgid "local config: false"
-msgstr "Τοπικά αρχεία"
-
-#: standalone/drakTermServ:1071
-#, fuzzy, c-format
-msgid "local config: true"
-msgstr "δεν ρυθμίστηκε"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Επεξεργασία Πελάτη"
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr ""
-
-#: standalone/drakTermServ:1112
-#, c-format
-msgid "Delete Client"
-msgstr "Διαγραφή Πελάτη"
-
-#: standalone/drakTermServ:1121
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Ρύθμιση dhcpd..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-"Πρέπει να εκκινηθεί ξανά ο Διαχειριστής Προβολής για να ισχύσουν όλες οι "
-"αλλαγές. \n"
-"(από την κονσόλα - service dm restart)"
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr ""
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr ""
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Μάσκα δικτύου:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr "Δρομολογητές:"
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet Mask:"
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr "Διεύθυνση Μετάδοσης:"
-
-#: standalone/drakTermServ:1266
-#, c-format
-msgid "Domain Name:"
-msgstr "Όνομα Τομέα:"
-
-#: standalone/drakTermServ:1274
-#, c-format
-msgid "Name Servers:"
-msgstr "Όνομα Εξυπηρετητών:"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr "Όριο Εκκίνησης ΙΡ:"
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr "Όριο Τερματισμού IP:"
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, c-format
-msgid "Write Config"
-msgstr "Εγγραφή Ρύθμισης"
-
-#: standalone/drakTermServ:1346
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Ρυθμίσεις Εξυπηρετητή dhcpd"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"Οι περισσότερες τιμές έχουν εξαχθεί \n"
-"από το σύστημά σας\n"
-"Αλλάξτε τις αν χρειάζεται."
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, c-format
-msgid "Please insert floppy disk:"
-msgstr "Παρακαλώ εισάγετε δισκέτα Εκκίνησης:"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr "Δεν είναι δυνατή η πρόσβαση στη δισκέτα!"
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "Τώρα μπορείτε να αφαιρέστε τη δισκέτα"
-
-#: standalone/drakTermServ:1524
-#, c-format
-msgid "No floppy drive available!"
-msgstr "Δεν υπάρχει διαθέσιμος οδηγός δισκέτας!"
-
-#: standalone/drakTermServ:1530
-#, fuzzy, c-format
-msgid "PXE image is %s/%s"
-msgstr "Η εικόνα Etherboot ISO είναι η %s"
-
-#: standalone/drakTermServ:1532
-#, fuzzy, c-format
-msgid "Error writing %s/%s"
-msgstr "Σφάλμα εγγραφής στο αρχείο %s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Η εικόνα Etherboot ISO είναι η %s"
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Κάτι δεν πήγε καλά! Είναι το mkisofs εγκατεστημένο;"
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Πρέπει να δημιουργήσω πρώτα το /etc/dhcpd.conf!"
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, fuzzy, c-format
-msgid "%s is not a user..\n"
-msgstr "το %s δεν ανταποκρίνεται"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr ""
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr ""
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr ""
-
-#: standalone/drakTermServ:1759
-#, fuzzy, c-format
-msgid "Deleted %s...\n"
-msgstr "Βρέθηκε ο %s"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, fuzzy, c-format
-msgid "%s not found...\n"
-msgstr "το %s δεν ανταποκρίνεται"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-"το /etc/hosts.allow και /etc/hosts.deny έχουν ήδη ρυθμιστεί - δεν "
-"μετατράπηκαν"
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr ""
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Σφάλμα!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr "Δεν μπορώ να βρω το απαραίτητο αρχείο εικόνας `%s'."
-
-#: standalone/drakautoinst:41
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Ρυθμίσεις αυτόματης εγκατάστασης"
-
-#: standalone/drakautoinst:42
-#, fuzzy, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-"Εγκατάσταση\n"
-"\n"
-" Επαναφόρτωση\n"
-"\n"
-"\n"
-"\n"
-" Ολοκληρώθηκε?"
-
-#: standalone/drakautoinst:60
-#, c-format
-msgid "replay"
-msgstr "επανάληψη"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr "χειροκίνητα"
-
-#: standalone/drakautoinst:64
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Ρύθμιση Αυτόματων Βημάτων"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"Παρακαλώ καθορίστε εάν για κάθε βήμα θα γίνει επανάληψη της εγκατάστασης, ή "
-"εάν γίνει χειροκίνητα"
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, c-format
-msgid "Creating auto install floppy"
-msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης"
-
-#: standalone/drakautoinst:90
-#, fuzzy, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Εισάγετε άδεια δισκέτα στον οδηγό %s"
-
-#: standalone/drakautoinst:91
-#, fuzzy, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Δημιουργία δισκέτας αυτόματης εγκατάστασης"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-" Καλώς Ορίσατε\n"
-"\n"
-"Οι παράμετροι για την αυτόματη εγκατάσταση υπάρχουν στα τμήματα αριστερά"
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Συγχαρητήρια!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Η δισκέτα δημιουργήθηκε με επιτυχία.\n"
-"Μπορείτε τώρα να επαναλάβετε την εγκατάσταση."
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Αυτόματη εγκατάσταση"
-
-#: standalone/drakautoinst:358
-#, c-format
-msgid "Add an item"
-msgstr "Προσθήκη στοιχείου"
-
-#: standalone/drakautoinst:365
-#, c-format
-msgid "Remove the last item"
-msgstr "Αφαίρεση του τελευταίου στοιχείου"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, fuzzy, c-format
-msgid "Interval cron not available as non-root"
-msgstr "Το cron δεν είναι ακόμα διαθέσιμη στους μη-root"
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-
-#: standalone/drakbackup:480
-#, fuzzy, c-format
-msgid "Old user list:\n"
-msgstr ""
-"\n"
-"- Αρχεία Χρηστών:\n"
-
-#: standalone/drakbackup:482
-#, fuzzy, c-format
-msgid "New user list:\n"
-msgstr ""
-"\n"
-"- Αρχεία Χρηστών:\n"
-
-#: standalone/drakbackup:511
-#, fuzzy, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-"\n"
-"                      Αναφορά DrakBackup \n"
-"\n"
-
-#: standalone/drakbackup:512
-#, fuzzy, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-"\n"
-"                      Δαίμονας αναφοράς DrakBackup \n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-"\n"
-"                    DrakBackup Λεπτομέρειες Αναφοράς\n"
-"\n"
-"\n"
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, fuzzy, c-format
-msgid "Total progress"
-msgstr "Συνολική πρόοδος"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-"Μπορεί να χρειαστούν μερικά λεπτά για τη δημιουργία των κλειδιών:To ../../"
-"standalone/drakbackup:1"
-
-#: standalone/drakbackup:612
-#, fuzzy, c-format
-msgid "Cannot spawn %s."
-msgstr "Δεν βρέθηκε το %s στο %s"
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Χωρίς ερώτηση κωδικού στο %s στη θύρα %s"
-
-#: standalone/drakbackup:630
-#, c-format
-msgid "Bad password on %s"
-msgstr "Εσφαλμένος κωδικός στο %s"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "Άρνηση πρόσβασης κατά τη μεταφορά του %s στο %s"
-
-#: standalone/drakbackup:632
-#, c-format
-msgid "Can not find %s on %s"
-msgstr "Δεν βρέθηκε το %s στο %s"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr "το %s δεν ανταποκρίνεται"
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-"Επιτυχής μεταφορά\n"
-"Ίσως να χρειαστεί να επαληθεύσετε ότι μπορείτε να προσπελάσετε τον "
-"διακομιστή με:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"χωρίς να ζητηθεί κωδικός πρόσβασης."
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr "Δεν υπάρχει CDR/DVDR στον οδηγό!"
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Φαίνεται να μην είναι εγγράψιμο μέσο!"
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr "Το μέσο δεν μπορεί να σβηστεί!"
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Ίσως χρειαστούν μερικά λεπτά για να σβηστεί το μέσο."
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr "Πρόβλημα δικαιωμάτων στην πρόσβαση του CD."
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr "Καμιά ταινία στο %s!"
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr "Αντίγραφο Ασφαλείας συστήματος αρχείων..."
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Αντίγραφα Ασφαλείας Σκληρού Δίσκου"
-
-#: standalone/drakbackup:1023
-#, c-format
-msgid "Backup User files..."
-msgstr "Αντίγραφο Ασφαλείας των αρχείων Χρηστών..."
-
-#: standalone/drakbackup:1057
-#, c-format
-msgid "Backup Other files..."
-msgstr "Αντίγραφο Ασφαλείας Άλλων αρχείων..."
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Διαδικασία Αντιγράφων ασφαλείας στον Σκληρό Δίσκο..."
-
-#: standalone/drakbackup:1063
-#, c-format
-msgid "No changes to backup!"
-msgstr "Δεν υπάρχουν αλλαγές για να γίνουν αντίγραφα ασφαλείας!"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Δραστηριότητες Drakbackup μέσω %s:\n"
-"\n"
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Σφάλμα στη σύνδεση FTP . Δεν ήταν δυνατή η αποστολή των αντιγράφων "
-"ασφαλείας μέσω FTP.\n"
-
-#: standalone/drakbackup:1090
-#, fuzzy, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-"Σφάλμα κατά την αποστολή αρχείου μέσω FTP.\n"
-"Παρακαλώ διορθώστε τη ρύθμιση του FTP."
-
-#: standalone/drakbackup:1092
-#, fuzzy, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr ""
-"αποστολή λίστας αρχείων μέσω FTP: %s\n"
-" "
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Δραστηριότητες Drakbackup μέσω CD:\n"
-"\n"
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Δραστηριότητες Drakbackup μέσω ταινίας:\n"
-"\n"
-
-#: standalone/drakbackup:1122
-#, fuzzy, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-"Σφάλμα στο sendmail\n"
-"  Η αναφορά δεν στάλθηκε\n"
-"  παρακαλώ ρυθμίστε το sendmail"
-
-#: standalone/drakbackup:1123
-#, c-format
-msgid " Error while sending mail. \n"
-msgstr "Σφάλμα κατά την αποστολή μηνύματος. \n"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr "Αδύνατη η δημιουργία καταλόγου!"
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-"\n"
-"Παρακαλώ επιλέξτε όλες τις επιλογές που χρειάζεστε.\n"
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-"Αυτές οι επιλογές μπορούν να πάρουν αντίγραφα ασφαλείας και να επαναφέρουν "
-"το /etc\n"
-
-#: standalone/drakbackup:1394
-#, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Αντίγραφο ασφαλείας των αρχείων Συστήματος (κατάλογος  /etc )"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr ""
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Χωρίς τα κρίσιμα αρχεία ( κωδικοί, ομάδες, fstab)"
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"Με αυτή την επιλογή θα μπορείτε να επαναφέρετε οποιαδήποτε\n"
-"έκδοση του καταλόγου  /etc."
-
-#: standalone/drakbackup:1431
-#, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr ""
-"Παρακαλώ επιλέξτε όσους χρήστες θέλετε να υπάρχουν στα αντίγραφα ασφαλείας"
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr "Χωρίς την cache του περιηγητή"
-
-#: standalone/drakbackup:1512
-#, fuzzy, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr ""
-"Παρακαλώ επιλέξτε τα αρχεία ή τους καταλόγους και κάντε κλικ στο 'προσθήκη'"
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, c-format
-msgid "Remove Selected"
-msgstr "Αφαίρεση Επιλεγμένων"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Χρήστες"
-
-#: standalone/drakbackup:1596
-#, c-format
-msgid "Use network connection to backup"
-msgstr "Χρήση σύνδεση δικτύου για τα αρχεία ασφαλείας"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr "Μέθοδος δικτύου:"
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1603
-#, fuzzy, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr ""
-"Δημιουργία/Μεταφορά\n"
-"αντιγράφων ασφαλείας των κλειδιών SSH"
-
-#: standalone/drakbackup:1605
-#, fuzzy, c-format
-msgid "Transfer Now"
-msgstr ""
-"  Μεταφορά   \n"
-"Τώρα"
-
-#: standalone/drakbackup:1607
-#, fuzzy, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr "Άλλο\n"
-
-#: standalone/drakbackup:1610
-#, fuzzy, c-format
-msgid "Host name or IP."
-msgstr "Όνομα συστήματος"
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-
-#: standalone/drakbackup:1627
-#, c-format
-msgid "Remember this password"
-msgstr "Απομνημόνευση του κωδικού πρόσβασης"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr "Χρειάζεται το δικτυακό όνομα, όνομα χρήστη και κωδικό πρόσβασης!"
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr "Χρήση CD/DVDROM για τα αρχεία ασφαλείας"
-
-#: standalone/drakbackup:1737
-#, fuzzy, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Παρακαλώ ορίστε τον χώρο του CD/DVD "
-
-#: standalone/drakbackup:1742
-#, fuzzy, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Παρακαλώ ορίστε τον χώρο του CD/DVD "
-
-#: standalone/drakbackup:1749
-#, fuzzy, c-format
-msgid "Multisession CD"
-msgstr "Σταθμός πολυμέσων"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr ""
-
-#: standalone/drakbackup:1757
-#, fuzzy, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "RW"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr "Σβήσιμο Τώρα "
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr ""
-
-#: standalone/drakbackup:1766
-#, fuzzy, c-format
-msgid "DVD-R media"
-msgstr "συσκευή"
-
-#: standalone/drakbackup:1768
-#, fuzzy, c-format
-msgid "DVDRAM device"
-msgstr "συσκευή"
-
-#: standalone/drakbackup:1799
-#, c-format
-msgid "No CD device defined!"
-msgstr "Δεν καθορίστηκε συσκευή CD"
-
-#: standalone/drakbackup:1841
-#, c-format
-msgid "Use tape to backup"
-msgstr "Χρήση ταινίας για τα αρχεία ασφαλείας"
-
-#: standalone/drakbackup:1844
-#, fuzzy, c-format
-msgid "Device name to use for backup"
-msgstr ""
-"Παρακαλώ εισάγεται το όνομα συσκευής για τη χρήση των αντιγράφων ασφαλείας"
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, fuzzy, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Χρήση ταινίας για τα αρχεία ασφαλείας"
-
-#: standalone/drakbackup:1862
-#, fuzzy, c-format
-msgid "Erase tape before backup"
-msgstr "Χρήση ταινίας για τα αρχεία ασφαλείας"
-
-#: standalone/drakbackup:1868
-#, fuzzy, c-format
-msgid "Eject tape after the backup"
-msgstr "Χρήση ταινίας για τα αρχεία ασφαλείας"
-
-#: standalone/drakbackup:1944
-#, fuzzy, c-format
-msgid "Enter the directory to save to:"
-msgstr "Παρακαλώ ορίστε τον κατάλογο αποθήκευσης: "
-
-#: standalone/drakbackup:1948
-#, fuzzy, c-format
-msgid "Directory to save to"
-msgstr "Παρακαλώ ορίστε τον κατάλογο αποθήκευσης: "
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr "CDROM / DVDROM"
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr "Σκληρός Δίσκος / NFS"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr "ωριαία"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr "καθημερινά"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr "εβδομαδιαία"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr "μηνιαία"
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, c-format
-msgid "custom"
-msgstr "προσαρμοσμένο"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Ιανουάριος"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Φεβρουάριος"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Μάρτιος"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "Απρίλιος"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Μάιος"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Ιούνιος"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Ιούλιος"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Αύγουστος"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Σεπτέμβριος"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Οκτώβριος"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Νοέμβριος"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Δεκέμβριος"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "Κυριακή"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "Δευτέρα"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "Τρίτη"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "Τετάρτη"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "Πέμπτη"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "Παρασκευή"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "Σάββατο"
-
-#: standalone/drakbackup:2096
-#, c-format
-msgid "Use daemon"
-msgstr "Χρήση δαίμονα"
-
-#: standalone/drakbackup:2100
-#, fuzzy, c-format
-msgid "Please choose the time interval between each backup"
-msgstr ""
-"Παρακαλώ επιλέξτε το \n"
-"διάστημα μεταξύ του κάθε\n"
-"αντίγραφου ασφαλείας"
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Λεπτό"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Ώρα"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Ημέρα"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Μήνας"
-
-#: standalone/drakbackup:2127
-#, fuzzy, c-format
-msgid "Weekday"
-msgstr "Τετάρτη"
-
-#: standalone/drakbackup:2133
-#, fuzzy, c-format
-msgid "Please choose the media for backup."
-msgstr ""
-"Παρακαλώ επιλέξτε το \n"
-"μέσο για τα αντίγραφα \n"
-"ασφαλείας"
-
-#: standalone/drakbackup:2139
-#, fuzzy, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr ""
-"\n"
-"\n"
-" Σημείωση."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, fuzzy, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-"\n"
-"\n"
-" Σημείωση."
-
-#: standalone/drakbackup:2188
-#, fuzzy, c-format
-msgid "Please choose the compression type"
-msgstr "Παρακαλώ επιλέξτε την ημερομηνία επαναφοράς"
-
-#: standalone/drakbackup:2192
-#, fuzzy, c-format
-msgid "Use .backupignore files"
-msgstr "Αντίγραφα ασφαλείας άλλων αρχείων"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
-"Αποστολή ηλεκτρονικού μηνύματος μετά από κάθε λήψη αντιγράφων ασφαλείας στο:"
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, fuzzy, c-format
-msgid "SMTP server for mail:"
-msgstr "Δικτυακό όνομα SMB εξυπηρετητή"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Διαγραφή των αρχείων tar από το δίσκο μετά τη μεταφορά σε άλλο μέσο."
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr "Τι"
-
-#: standalone/drakbackup:2259
-#, c-format
-msgid "Where"
-msgstr "Που"
-
-#: standalone/drakbackup:2264
-#, c-format
-msgid "When"
-msgstr "Πότε"
-
-#: standalone/drakbackup:2269
-#, c-format
-msgid "More Options"
-msgstr "Περισσότερες Επιλογές"
-
-#: standalone/drakbackup:2282
-#, fuzzy, c-format
-msgid "Backup destination not configured..."
-msgstr "Η λειτουργικότητα του δικτύου δεν ρυθμίστηκε"
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, c-format
-msgid "Drakbackup Configuration"
-msgstr "Ρυθμίσεις Drakbackup"
-
-#: standalone/drakbackup:2318
-#, c-format
-msgid "Please choose where you want to backup"
-msgstr "Παρακαλώ επιλέξτε την θέση των αντιγράφων ασφαλείας"
-
-#: standalone/drakbackup:2321
-#, fuzzy, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr "Διαγραφή των αρχείων tar από το δίσκο μετά τη μεταφορά σε άλλο μέσο."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr "στο Δίκτυο"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr "στο CDROM"
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr "στη Συσκευή Ταινίας"
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr "Αντίγραφο Ασφαλείας Χρηστών"
-
-#: standalone/drakbackup:2368
-#, fuzzy, c-format
-msgid " (Default is all users)"
-msgstr "Προεπιλεγμένος εκτυπωτής"
-
-#: standalone/drakbackup:2381
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Παρακαλώ επιλέξτε τι θέλετε να πάρετε σε αντίγραφα ασφαλείας"
-
-#: standalone/drakbackup:2382
-#, c-format
-msgid "Backup System"
-msgstr "Αντίγραφο Ασφαλείας Συστήματος"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr "Επιλογή χρήστη χειροκίνητα"
-
-#: standalone/drakbackup:2413
-#, c-format
-msgid "Please select data to backup..."
-msgstr "Παρακαλώ επιλέξτε τα αρχεία που θα γίνουν αντίγραφα ασφαλείας"
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-"\n"
-"- Πηγές Αντιγράφων Ασφαλείας:\n"
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-"\n"
-"- Αρχεία Συστήματος:\n"
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-"\n"
-"- Αρχεία Χρηστών:\n"
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-"\n"
-"- Άλλα Αρχεία:\n"
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-"\n"
-"- Αποθήκευση στον σκληρό δίσκο στην θέση: %s\n"
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr ""
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-"\n"
-"- Διαγραφή αρχείων tar από τον δίσκο μετά το αντίγραφο ασφαλείας.\n"
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-"\n"
-"- Εγγραφή σε CD"
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "RW"
-
-#: standalone/drakbackup:2504
-#, c-format
-msgid " on device: %s"
-msgstr "Στη Συσκευή : %s"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr ""
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-" Αποθήκευση σε Ταινία στη συσκευή: %s"
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tΣβήσιμο=%s"
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-"\n"
-" Αποθήκευση μέσω %s στον υπολογιστή: %s\n"
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t όνομα χρήστη: %s\n"
-"\t\t στη θέση: %s \n"
-
-#: standalone/drakbackup:2513
-#, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr ""
-"\n"
-"- Επιλογές:\n"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tΧωρίς το Αρχείο Συστήματος\n"
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tΑντίγραφα Ασφαλείας ως tar και bzip2\n"
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tΑντίγραφα Ασφαλείας ως tar και gzip\n"
-
-#: standalone/drakbackup:2518
-#, fuzzy, c-format
-msgid "\tBackups use tar only\n"
-msgstr "\tΑντίγραφα Ασφαλείας ως tar και gzip\n"
-
-#: standalone/drakbackup:2520
-#, fuzzy, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "Αντίγραφα ασφαλείας άλλων αρχείων"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, fuzzy, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "Στον εξυπηρετητή CUPS \"%s\""
-
-#: standalone/drakbackup:2525
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-"\n"
-"- Δαίμονας (%s) μαζί με :\n"
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Σκληρός Δίσκος.\n"
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr "\t-CD-R.\n"
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Ταινία \n"
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Δίκτυο μέσω FTP.\n"
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Δίκτυο μέσω SSH.\n"
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Δίκτυο μέσω rsync.\n"
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Καμία ρύθμιση, κάντε κλικ στον Οδηγό ή στο Προχωρημένα.\n"
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-"Λίστα των δεδομένων προς επαναφορά:\n"
-"\n"
-
-#: standalone/drakbackup:2540
-#, fuzzy, c-format
-msgid "- Restore System Files.\n"
-msgstr ""
-"\n"
-"- Αρχεία Συστήματος:\n"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2545
-#, fuzzy, c-format
-msgid "- Restore User Files: \n"
-msgstr ""
-"\n"
-"- Αρχεία Χρηστών:\n"
-
-#: standalone/drakbackup:2550
-#, fuzzy, c-format
-msgid "- Restore Other Files: \n"
-msgstr ""
-"\n"
-"- Άλλα Αρχεία:\n"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-"Λίστα των κατεστραμμένων δεδομένων:\n"
-"\n"
-
-#: standalone/drakbackup:2731
-#, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Παρακαλώ αφαιρέστε το την επόμενη φορά."
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr "Τα αντίγραφα ασφαλείας είναι κατεστραμμένα"
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr "          Όλα τα επιλεγμένα δεδομένα έχουν          "
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr "         Ανακτηθεί με επιτυχία στο %s       "
-
-#: standalone/drakbackup:2883
-#, c-format
-msgid "         Restore Configuration       "
-msgstr "        Ρυθμίσεις Επαναφοράς       "
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr "Εντάξει για την επαναφορά των άλλων αρχείων."
-
-#: standalone/drakbackup:2927
-#, fuzzy, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "χρήστης"
-
-#: standalone/drakbackup:2992
-#, fuzzy, c-format
-msgid "Please choose the date to restore:"
-msgstr "Παρακαλώ επιλέξτε την ημερομηνία επαναφοράς"
-
-#: standalone/drakbackup:3029
-#, c-format
-msgid "Restore from Hard Disk."
-msgstr "Επαναφορά από τον σκληρό δίσκο."
-
-#: standalone/drakbackup:3031
-#, fuzzy, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Παρακαλώ εισάγετε τον κατάλογο που βρίσκονται τα αντίγραφα ασφαλείας"
-
-#: standalone/drakbackup:3035
-#, fuzzy, c-format
-msgid "Directory with backups"
-msgstr "Επαναφορά όλων των αντιγράφων ασφαλείας"
-
-#: standalone/drakbackup:3089
-#, c-format
-msgid "Select another media to restore from"
-msgstr "Επιλέξτε άλλο μέσο για την ανάκτηση"
-
-#: standalone/drakbackup:3091
-#, c-format
-msgid "Other Media"
-msgstr "Άλλα Μέσα"
-
-#: standalone/drakbackup:3096
-#, c-format
-msgid "Restore system"
-msgstr "Επαναφορά συστήματος"
-
-#: standalone/drakbackup:3097
-#, c-format
-msgid "Restore Users"
-msgstr "Επαναφορά Χρηστών"
-
-#: standalone/drakbackup:3098
-#, c-format
-msgid "Restore Other"
-msgstr "Επαναφορά Άλλων"
-
-#: standalone/drakbackup:3100
-#, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "επιλέξτε τη θέση επαναφοράς (αντί του /)"
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, fuzzy, c-format
-msgid "Path To Restore To"
-msgstr "Προσαρμοσμένη Επαναφορά"
-
-#: standalone/drakbackup:3107
-#, fuzzy, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Ολοκληρώθηκε νέο"
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr "Αφαίρεση καταλόγων χρηστών πριν από την επαναφορά."
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr ""
-
-#: standalone/drakbackup:3215
-#, fuzzy, c-format
-msgid "No matches found..."
-msgstr "Δεν βρέθηκε εικόνα"
-
-#: standalone/drakbackup:3219
-#, fuzzy, c-format
-msgid "Restore Selected"
-msgstr ""
-"Επαναφορά Επιλεγμένων\n"
-"Αρχείων"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr "Επαναφορά\n"
-
-#: standalone/drakbackup:3369
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr ""
-"Επαναφορά Επιλεγμένων\n"
-"Αρχείων"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr "Τα αντίγραφα ασφαλείας δεν βρέθηκαν στο %s."
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid "Restore From CD"
-msgstr "Επαναφορά από CD"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid "Restore From Tape"
-msgstr "Επαναφορά Από Ταινία"
-
-#: standalone/drakbackup:3471
-#, fuzzy, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"\n"
-" συσκευή"
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network"
-msgstr "Επαναφορά μέσω δικτύου"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Επαναφορά Μέσω Πρωτόκολλο Δικτύου: %s"
-
-#: standalone/drakbackup:3485
-#, c-format
-msgid "Host Name"
-msgstr "Όνομα Συστήματος"
-
-#: standalone/drakbackup:3486
-#, fuzzy, c-format
-msgid "Host Path or Module"
-msgstr "Σύστημα"
-
-#: standalone/drakbackup:3493
-#, c-format
-msgid "Password required"
-msgstr "Απαιτείται κωδικός πρόσβασης"
-
-#: standalone/drakbackup:3499
-#, c-format
-msgid "Username required"
-msgstr "Απαιτείται όνομα χρήστη"
-
-#: standalone/drakbackup:3502
-#, c-format
-msgid "Hostname required"
-msgstr "απαιτείται το δικτυακό όνομα"
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr "Η Θέση ή το Άρθρωμα απαιτείται"
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr ""
-
-#: standalone/drakbackup:3523
-#, c-format
-msgid "Restore Failed..."
-msgstr "Η Επαναφορά Απέτυχε..."
-
-#: standalone/drakbackup:3541
-#, fuzzy, c-format
-msgid "%s not retrieved..."
-msgstr "το %s δεν ανταποκρίνεται"
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, fuzzy, c-format
-msgid "Search for files to restore"
-msgstr "Επιλέξτε άλλο μέσο για την ανάκτηση"
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr "Επαναφορά όλων των αντιγράφων ασφαλείας"
-
-#: standalone/drakbackup:3774
-#, c-format
-msgid "Custom Restore"
-msgstr "Προσαρμοσμένη Επαναφορά"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, c-format
-msgid "Restore From Catalog"
-msgstr "Επαναφορά από Κατάλογο"
-
-#: standalone/drakbackup:3799
-#, fuzzy, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Παρακαλώ επιλέξτε τα δεδομένα προς επαναφορά..."
-
-#: standalone/drakbackup:3800
-#, fuzzy, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Είναι σωστή η ρύθμιση;"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr ""
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr "Το CD είναι στη θέση του - συνέχεια"
-
-#: standalone/drakbackup:3824
-#, fuzzy, c-format
-msgid "Browse to new restore repository."
-msgstr "αναζήτηση νέο."
-
-#: standalone/drakbackup:3825
-#, fuzzy, c-format
-msgid "Directory To Restore From"
-msgstr "Επαναφορά από CD"
-
-#: standalone/drakbackup:3861
-#, c-format
-msgid "Restore Progress"
-msgstr "Πρόοδος Ανάκτησης"
-
-#: standalone/drakbackup:3972
-#, c-format
-msgid "Build Backup"
-msgstr "Δημιουργία αντιγράφων ασφαλείας"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Επαναφορά"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Τα παρακάτω πακέτα πρέπει να εγκατασταθούν:\n"
-
-#: standalone/drakbackup:4120
-#, c-format
-msgid "Please select data to restore..."
-msgstr "Παρακαλώ επιλέξτε τα δεδομένα προς επαναφορά..."
-
-#: standalone/drakbackup:4160
-#, c-format
-msgid "Backup system files"
-msgstr "Αντίγραφα ασφαλείας του συστήματος αρχείων"
-
-#: standalone/drakbackup:4163
-#, c-format
-msgid "Backup user files"
-msgstr "Αντίγραφα ασφαλείας αρχείων χρηστών"
-
-#: standalone/drakbackup:4166
-#, c-format
-msgid "Backup other files"
-msgstr "Αντίγραφα ασφαλείας άλλων αρχείων"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr "Συνολική Πρόοδος"
-
-#: standalone/drakbackup:4195
-#, fuzzy, c-format
-msgid "Sending files by FTP"
-msgstr "Αποστολή αρχείων..."
-
-#: standalone/drakbackup:4198
-#, c-format
-msgid "Sending files..."
-msgstr "Αποστολή αρχείων..."
-
-#: standalone/drakbackup:4268
-#, c-format
-msgid "Backup Now from configuration file"
-msgstr "Δημιουργία Αντιγράφων Ασφαλείας από το αρχείο ρυθμίσεων"
-
-#: standalone/drakbackup:4273
-#, c-format
-msgid "View Backup Configuration."
-msgstr "Προβολή Ρυθμίσεων Αντιγράφων Ασφαλείας"
-
-#: standalone/drakbackup:4299
-#, c-format
-msgid "Wizard Configuration"
-msgstr "Ρυθμίσεις Οδηγού"
-
-#: standalone/drakbackup:4304
-#, c-format
-msgid "Advanced Configuration"
-msgstr "Προχωρημένες Ρυθμίσεις"
-
-#: standalone/drakbackup:4309
-#, fuzzy, c-format
-msgid "View Configuration"
-msgstr "Ρύθμιση"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr ""
-
-#: standalone/drakbackup:4318
-#, c-format
-msgid "Backup Now"
-msgstr "Αντίγραφα ασφαλείας Τώρα"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-"Δεν βρέθηκε ρύθμιση\n"
-"παρακαλώ κάντε κλικ στο Οδηγό ή στο Προχωρημένο."
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Αρχείο"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Αρχείο/Έ_ξοδος"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-
-#: standalone/drakboot:127
-#, fuzzy, c-format
-msgid "Do you want to configure it now?"
-msgstr "Θέλετε να δοκιμάσετε τις ρυθμίσεις;"
-
-#: standalone/drakboot:136
-#, c-format
-msgid "Install themes"
-msgstr "Εγκατάσταση θεμάτων"
-
-#: standalone/drakboot:138
-#, fuzzy, c-format
-msgid "Graphical boot theme selection"
-msgstr "Επιλογή μοντέλου εκτυπωτή"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Θέμα"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Εμφάνιση θέματος\n"
-"στην κονσόλα"
-
-#: standalone/drakboot:151
-#, c-format
-msgid "Create new theme"
-msgstr "Δημιουργία νέου θέματος"
-
-#: standalone/drakboot:183
-#, fuzzy, c-format
-msgid "Default user"
-msgstr "Προεπιλεγμένος εκτυπωτής"
-
-#: standalone/drakboot:184
-#, fuzzy, c-format
-msgid "Default desktop"
-msgstr "Προεπιλεγμένο"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr "Όχι, δεν επιθυμώ αυτόματη προσπέλαση"
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ναι, επιθυμώ αυτόματη προσπέλαση με (χρήστης, περιβάλλον)"
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Κατάσταση συστήματος"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Λειτουργία γραφικού περιβάλλοντος κατά την εκκίνηση του συστήματος"
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, fuzzy, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Εργαλείο Αναφοράς Σφαλμάτων Mandriva"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Κέντρο Ελέγχου Mandriva Linux"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr "Εργαλείο Συγχρονισμού"
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr "Ξεχωριστά Εργαλεία"
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
-
-#: standalone/drakbug:53
-#, c-format
-msgid "Msec"
-msgstr "Msec"
-
-#: standalone/drakbug:54
-#, c-format
-msgid "Remote Control"
-msgstr "Απομακρυσμένος Έλεγχος"
-
-#: standalone/drakbug:55
-#, c-format
-msgid "Software Manager"
-msgstr "Διαχειριστής Λογισμικού"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr "Εργαλείο Μετάβασης Windows "
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, c-format
-msgid "Configuration Wizards"
-msgstr "Οδηγοί Ρύθμισης"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr ""
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Εύρεση πακέτου"
-
-#: standalone/drakbug:87
-#, c-format
-msgid "Package: "
-msgstr "Πακέτο:"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Πυρήνας:"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-
-#: standalone/drakbug:106
-#, c-format
-msgid "Report"
-msgstr "Αναφορά"
-
-#: standalone/drakbug:163
-#, c-format
-msgid "Not installed"
-msgstr "Μη εγκατεστημένο"
-
-#: standalone/drakbug:175
-#, c-format
-msgid "Package not installed"
-msgstr "Το πακέτο δεν είναι εγκατεστημένο"
-
-#: standalone/drakclock:29
-#, fuzzy, c-format
-msgid "DrakClock"
-msgstr "Drakbackup"
-
-#: standalone/drakclock:39
-#, fuzzy, c-format
-msgid "not defined"
-msgstr "δεν ρυθμίστηκε"
-
-#: standalone/drakclock:41
-#, fuzzy, c-format
-msgid "Change Time Zone"
-msgstr "Ωρολογιακή Ζώνη"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Ζώνη ώρας - DrakClock"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakClock"
-
-#: standalone/drakclock:47
-#, fuzzy, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Το ρολόι του υπολογιστή σας είναι ρυθμισμένο σε GMT (ώρα Γκρίνουιτς)"
-
-#: standalone/drakclock:75
-#, fuzzy, c-format
-msgid "Network Time Protocol"
-msgstr "Συσκευή δικτύου"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-
-#: standalone/drakclock:78
-#, fuzzy, c-format
-msgid "Enable Network Time Protocol"
-msgstr "Επαναφορά Μέσω Πρωτόκολλο Δικτύου: %s"
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Εξυπηρετητής:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Αρχικοποίηση"
-
-#: standalone/drakclock:224
-#, fuzzy, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr "Το πακέτο %s πρέπει να αναβαθμιστεί. Θέλετε να το εγκαταστήσετε;"
-
-#: standalone/drakconnect:86
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ρύθμιση δικτύου (%d προσαρμογείς)"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Πύλη δικτύου:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, c-format
-msgid "Interface:"
-msgstr "Διεπαφή:"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr "Παρακαλώ περιμένετε"
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Διεπαφή"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Κατάσταση:"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Όνομα συστήματος: "
-
-#: standalone/drakconnect:136
-#, fuzzy, c-format
-msgid "Configure hostname..."
-msgstr "Ρύθμιση ποντικιού"
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "Ρύθμιση LAN"
-
-#: standalone/drakconnect:155
-#, c-format
-msgid "Configure Local Area Network..."
-msgstr "Ρύθμιση τοπικού δικτύου..."
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Εφαρμογή"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Διαχείριση Συνδέσεων"
-
-#: standalone/drakconnect:225
-#, fuzzy, c-format
-msgid "Device selected"
-msgstr "Αφαίρεση Επιλεγμένων"
-
-#: standalone/drakconnect:307
-#, fuzzy, c-format
-msgid "IP configuration"
-msgstr "Ρύθμιση CUPS"
-
-#: standalone/drakconnect:346
-#, fuzzy, c-format
-msgid "DNS servers"
-msgstr "Εξυπηρετητής DNS"
-
-#: standalone/drakconnect:354
-#, fuzzy, c-format
-msgid "Search Domain"
-msgstr "Τομέας NIS"
-
-#: standalone/drakconnect:362
-#, fuzzy, c-format
-msgid "static"
-msgstr "Αυτόματο IP"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr "DHCP"
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Έλεγχος Ροής"
-
-#: standalone/drakconnect:527
-#, fuzzy, c-format
-msgid "Line termination"
-msgstr "Σταθμός Διαδικτύου"
-
-#: standalone/drakconnect:538
-#, fuzzy, c-format
-msgid "Modem timeout"
-msgstr "Τέλος Χρόνου Εκκίνησης Πυρήνα"
-
-#: standalone/drakconnect:542
-#, fuzzy, c-format
-msgid "Use lock file"
-msgstr "Επιλέξτε αρχείο"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr ""
-
-#: standalone/drakconnect:547
-#, fuzzy, c-format
-msgid "Busy wait"
-msgstr "Κουβέιτ"
-
-#: standalone/drakconnect:552
-#, fuzzy, c-format
-msgid "Modem sound"
-msgstr "Μόντεμ"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Ενεργοποίηση"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Απενεργ."
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr "Κλάση Μέσου"
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Όνομα αρθρώματος"
-
-#: standalone/drakconnect:606
-#, fuzzy, c-format
-msgid "Mac Address"
-msgstr "Διεύθυνση Μετάδοσης:"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Bus"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr "Θέση του διαύλου"
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Δεν βρέθηκε προσαρμογέας δικτύου Ethernet στο σύστημά σας. Παρακαλώ "
-"χρησιμοποιείστε το πρόγραμμα ρύθμισης υλικού."
-
-#: standalone/drakconnect:715
-#, fuzzy, c-format
-msgid "Remove a network interface"
-msgstr "Επιλέξτε συσκευή δικτύου"
-
-#: standalone/drakconnect:719
-#, fuzzy, c-format
-msgid "Select the network interface to remove:"
-msgstr "Επιλέξτε συσκευή δικτύου"
-
-#: standalone/drakconnect:751
-#, fuzzy, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Ένα πρόβλημα εμφανίστηκε κατά την επανεκκίνηση του δικτύου: \n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr ""
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr ""
-
-#: standalone/drakconnect:769
-#, fuzzy, c-format
-msgid "No Mask"
-msgstr "Λάθος πακέτο"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr ""
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, fuzzy, c-format
-msgid "down"
-msgstr "Ολοκληρώθηκε"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Συνδέθηκε"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Δε συνδέθηκε"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Αποσύνδεση..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Σύνδεση..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Προειδοποίηση, εντοπίστηκε μια άλλη σύνδεση Διαδικτύου που ίσως χρησιμοποιεί "
-"το δίκτυό σας"
-
-#: standalone/drakconnect:874
-#, fuzzy, c-format
-msgid "Deactivate now"
-msgstr "απενεργοποίηση τώρα"
-
-#: standalone/drakconnect:874
-#, fuzzy, c-format
-msgid "Activate now"
-msgstr "ενεργοποίηση τώρα"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Δεν έχετε κάποια ρυθμισμένη διεπαφή.\n"
-"Ρυθμίστε την κάνοντας κλικ στο 'Ρύθμιση'"
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "Ρύθμιση LΑΝ"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Προσαρμογέας %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr "Πρωτόκολλο Εκκίνησης"
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr "Ξεκίνησαν στην εκκίνηση"
-
-#: standalone/drakconnect:954
-#, fuzzy, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Η διεπαφή δεν έχει ρυθμιστή ακόμα. \n"
-"Εκτελέστε τον οδηγό ρύθμισης στην κυρίως οθόνη"
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, fuzzy, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-"Η διεπαφή δεν έχει ρυθμιστή ακόμα. \n"
-"Εκτελέστε τον οδηγό ρύθμισης στην κυρίως οθόνη"
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, fuzzy, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Επιλέξτε συσκευή δικτύου"
-
-#: standalone/drakconnect:1017
-#, c-format
-msgid "Internet connection configuration"
-msgstr "Ρύθμιση σύνδεσης Διαδικτύου"
-
-#: standalone/drakconnect:1035
-#, fuzzy, c-format
-msgid "Third DNS server (optional)"
-msgstr "Πρώτος εξυπηρετητής DNS (προαιρετικό)"
-
-#: standalone/drakconnect:1057
-#, c-format
-msgid "Internet Connection Configuration"
-msgstr "Ρύθμιση Σύνδεσης Διαδικτύου"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Πρόσβαση στο Διαδίκτυο"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Τύπος σύνδεσης: "
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Κατάσταση:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, fuzzy, c-format
-msgid "XDM (X Display Manager)"
-msgstr "Επιλέγοντας έναν διαχειριστή προβολής"
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr "Επιλέγοντας έναν διαχειριστή προβολής"
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Ο Διαχειριστής Προβολής X11 σας επιτρέπει να συνδεθείτε\n"
-"με γραφικό τρόπο στο σύστημά σας με το Σύστημα Παραθύρου Χ να υποστηρίζει\n"
-"ταυτόχρονες διαφορετικές συνεδρίες Χ στο μηχάνημά σας."
-
-#: standalone/drakedm:79
-#, fuzzy, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr "Το δίκτυο πρέπει να επανεκκινηθεί, Θέλετε να το επανεκκινήσετε ;"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, fuzzy, c-format
-msgid "Boot disk creation"
-msgstr "δημιουργία δισκέτας εκκίνησης"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Γενικά"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Συσκευή"
-
-#: standalone/drakfloppy:88
-#, fuzzy, c-format
-msgid "Kernel version"
-msgstr "έκδοση πυρήνα"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Προτιμήσεις"
-
-#: standalone/drakfloppy:117
-#, fuzzy, c-format
-msgid "Advanced preferences"
-msgstr "Προχωρημένες Επιλογές"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Μέγεθος"
-
-#: standalone/drakfloppy:139
-#, fuzzy, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "προαιρετικές επιλογές του mkinitrd"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "μετά βίας"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "παράλειψη των αρθρωμάτων raid"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "αν χρειάζεται"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "παράλειψη των αρθρωμάτων scsi"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Προσθήκη αρθρώματος"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Απομάκρυνση αρθρώματος"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Σιγουρευτείτε πως ένα μέσο είναι παρόν για τη συσκευή %s"
-
-#: standalone/drakfloppy:297
-#, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Δεν υπάρχει μέσο ή υπάρχει προστασία εγγραφής για τη συσκευή %s.\n"
-"Παρακαλώ εισάγετε ένα."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Αδυναμία fork: %s"
-
-#: standalone/drakfloppy:303
-#, fuzzy, c-format
-msgid "Floppy creation completed"
-msgstr "Η σύνδεση έγινε."
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, fuzzy, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Αδυναμία σωστού τερματισμού του mkbootdisk: \n"
-" %s \n"
-" %s"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr "Αναζήτηση εγκατεστημένων γραμματοσειρών"
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr "Οι αποεπιλεγμένες γραμματοσειρές εγκαταστάθηκαν"
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr "ανάλυση όλων των γραμματοσειρών"
-
-#: standalone/drakfont:210
-#, fuzzy, c-format
-msgid "No fonts found"
-msgstr "δεν βρέθηκαν γραμματοσειρές"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, c-format
-msgid "done"
-msgstr "Ολοκληρώθηκε"
-
-#: standalone/drakfont:223
-#, fuzzy, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr "δεν βρέθηκαν γραμματοσειρές στις προσαρτημένες κατατμήσεις"
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr "Ξαναεπιλέξτε τις σωστές γραμματοσειρές"
-
-#: standalone/drakfont:261
-#, fuzzy, c-format
-msgid "Could not find any font.\n"
-msgstr "δεν βρέθηκε καμία γραμματοσειρά\n"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr "Αναζήτηση γραμματοσειρών στην λίστα εγκατάστασης"
-
-#: standalone/drakfont:296
-#, fuzzy, c-format
-msgid "%s fonts conversion"
-msgstr "μετατροπή γραμματοσειρών pfm"
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr "Αντιγραφή Γραμματοσειρών"
-
-#: standalone/drakfont:328
-#, c-format
-msgid "True Type fonts installation"
-msgstr "Εγκατάσταση γραμματοσειρών True Type"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "παρακαλώ περιμένετε κατά το ttmkfdir..."
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr "Η εγκατάστασης True Type ολοκληρώθηκε"
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr "δημιουργία type1inst"
-
-#: standalone/drakfont:351
-#, fuzzy, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
-
-#: standalone/drakfont:364
-#, c-format
-msgid "Restart XFS"
-msgstr "Επανεκκίνηση XFS"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: standalone/drakfont:422
-#, c-format
-msgid "xfs restart"
-msgstr "επανεκκίνηση xfs"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Πριν εγκαταστήσετε τις γραμματοσειρές, βεβαιωθείτε ότι έχετε το δικαίωμα να "
-"κάνετε χρήση αυτών των γραμματοσειρών καθώς και να τις εγκαταστήσετε στον "
-"υπολογιστή σας\n"
-"\n"
-"-Μπορείτε να εγκαταστήσετε τις γραμματοσειρές κανονικά. Σε σπάνιες "
-"περιπτώσεις, εικονικές γραμματοσειρές μπορούν να παγώσουν τον εξυπηρετητή Χ."
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr ""
-
-#: standalone/drakfont:484
-#, c-format
-msgid "Font List"
-msgstr "Λίστα Γραμματοσειρών"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Περί"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Απεγκατάσταση"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Εισαγωγή"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-
-#: standalone/drakfont:520
-#, fuzzy, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"\n"
-" Γενικά Άδεια\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-"\n"
-" Γενικά Άδεια\n"
-"\n"
-" ληφθέντα Γενικά Άδεια\n"
-"\n"
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-
-#: standalone/drakfont:555
-#, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Επιλέξτε τις εφαρμογές που θα υποστηρίζουν τις γραμματοσειρές :"
-
-#: standalone/drakfont:556
-#, fuzzy, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-"Πριν εγκαταστήσετε τις γραμματοσειρές, βεβαιωθείτε ότι έχετε το δικαίωμα να "
-"κάνετε χρήση αυτών των γραμματοσειρών καθώς και να τις εγκαταστήσετε στον "
-"υπολογιστή σας\n"
-"\n"
-"-Μπορείτε να εγκαταστήσετε τις γραμματοσειρές κανονικά. Σε σπάνιες "
-"περιπτώσεις, εικονικές γραμματοσειρές μπορούν να παγώσουν τον εξυπηρετητή Χ."
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
-
-#: standalone/drakfont:568
-#, c-format
-msgid "Abiword"
-msgstr "Abiword"
-
-#: standalone/drakfont:569
-#, c-format
-msgid "Generic Printers"
-msgstr "Γενικοί Εκτυπωτές"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-"Επιλέξτε το αρχείο γραμματοσειρές ή τον κατάλογο και κάντε κλικ στο "
-"'Προσθήκη'"
-
-#: standalone/drakfont:586
-#, c-format
-msgid "File Selection"
-msgstr "Επιλογή Αρχείου"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, fuzzy, c-format
-msgid "Import fonts"
-msgstr "Εισαγωγή Γραμματοσειρών"
-
-#: standalone/drakfont:658
-#, fuzzy, c-format
-msgid "Install fonts"
-msgstr "Απεγκατάσταση Γραμματοσειρών"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr "κάντε κλικ εδώ αν είστε βέβαιοι"
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr "εδώ αν όχι."
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr "Αποεπιλογή Όλων"
-
-#: standalone/drakfont:737
-#, c-format
-msgid "Selected All"
-msgstr "Επιλογή Όλων"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Λίστα Αφαίρεσης"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, fuzzy, c-format
-msgid "Importing fonts"
-msgstr "Εισαγωγή Γραμματοσειρών"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr "Αρχικά τεστ"
-
-#: standalone/drakfont:756
-#, c-format
-msgid "Copy fonts on your system"
-msgstr "Αντιγραφή γραμματοσειρών στο σύστημά σας"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr "Εγκατάσταση & μετατροπή Γραμματοσειρών"
-
-#: standalone/drakfont:758
-#, c-format
-msgid "Post Install"
-msgstr ""
-
-#: standalone/drakfont:776
-#, c-format
-msgid "Remove fonts on your system"
-msgstr "Αφαίρεση γραμματοσειρών από το σύστημά σας"
-
-#: standalone/drakfont:777
-#, c-format
-msgid "Post Uninstall"
-msgstr ""
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Κοινή Σύνδεση Διαδικτύου"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, fuzzy, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr "Λυπάμαι, υποστηρίζονται μόνο οι πυρήνες 2.4"
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Κοινή Σύνδεση Διαδικτύου απενεργοποιημένη"
-
-#: standalone/drakgw:123
-#, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Η ρύθμιση της κοινής χρήσης διαδικτύου έχει ήδη γίνει.\n"
-"Είναι απενεργοποιημένη.\n"
-"\n"
-"Τι θέλετε να κάνετε:"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "ενεργοποίηση"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "επαναρύθμιση"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "άκυρο"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr "Ενεργοποίηση εξυπηρετητών..."
-
-#: standalone/drakgw:146
-#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Η Κοινή Σύνδεση στο Διαδίκτυο τώρα ενεργοποιήθηκε."
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Κοινή Σύνδεση Διαδικτύου ενεργοποιημένη"
-
-#: standalone/drakgw:150
-#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Η ρύθμιση της κοινής σύνδεσης του Διαδικτύου έχει ήδη γίνει.\n"
-"Αυτή τη στιγμή είναι ενεργή.\n"
-"\n"
-"Τι θέλετε να κάνετε;"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "απενεργοποίηση"
-
-#: standalone/drakgw:157
-#, c-format
-msgid "Disabling servers..."
-msgstr "Απενεργοποίηση εξυπηρετητών..."
-
-#: standalone/drakgw:172
-#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Η Κοινή Σύνδεση Διαδικτύου τώρα απενεργοποιήθηκε."
-
-#: standalone/drakgw:192
-#, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Πρόκειται να ρυθμίσετε τον υπολογιστή σας για να μοιράζεται την σύνδεσή του "
-"στο Διαδίκτυο.\n"
-"Με αυτή τη δυνατότητα άλλοι υπολογιστές στο τοπικό σας δίκτυο θα μπορούν "
-"νακάνουν χρήση της σύνδεσης αυτού του υπολογιστή στο Διαδίκτυο.\n"
-" \n"
-"Βεβαιωθείτε ότι έχετε ρυθμίσει το Δίκτυο/Πρόσβαση Διαδικτύου με τη χρήση του "
-"drakconnect πριν προχωρήσετε.\n"
-"\n"
-"Σημ. Θα πρέπει να έχετε μια κάρτα δικτύου για να ρυθμίσετε το Τοπικό σας "
-"Δίκτυο (LAN)."
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Διεπαφή %s (χρήση αρθρώματος %s)"
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Διεπαφή %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Δεν βρέθηκε προσαρμογέας δικτύου στο σύστημά σας!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Συσκευή δικτύου"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Υπάρχει μόνο ένας ρυθμισμένος προσαρμογέας δικτύου στο σύστημά σας:\n"
-"\n"
-"%s\n"
-"\n"
-"Θα ρυθμιστεί το Τοπικό σας Δίκτυο με αυτόν τον προσαρμογέα."
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Επιλέξτε συσκευή δικτύου"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Παρακαλώ επιλέξτε τι προσαρμογέας δικτύου θα συνδεθεί στο τοπικό σας δίκτυο."
-
-#: standalone/drakgw:290
-#, c-format
-msgid "Network interface already configured"
-msgstr "Η διεπαφή Δικτύου έχει ήδη ρυθμιστεί"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-"Προειδοποίηση, ο προσαρμογέας δικτύου (%s) έχει ήδη ρύθμιση\n"
-"\n"
-"Θέλετε να ξαναρυθμιστεί αυτόματα ;\n"
-"\n"
-"Μπορείτε να το κάνετε και μόνοι σας αλλά πρέπει να ξέρετε τι κάνετε."
-
-#: standalone/drakgw:296
-#, c-format
-msgid "Automatic reconfiguration"
-msgstr "Αυτόματη επαναρύθμισης"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr "Όχι (μόνο για ειδικούς)"
-
-#: standalone/drakgw:297
-#, c-format
-msgid "Show current interface configuration"
-msgstr "Προβολή της τρέχουσας ρύθμισης διεπαφή"
-
-#: standalone/drakgw:298
-#, c-format
-msgid "Current interface configuration"
-msgstr "Ρύθμιση τρέχουσας διεπαφής"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-"Τρέχουσες ρυθμίσεις του %s':\n"
-"\n"
-"Δίκτυο: %s\n"
-"Διεύθυνση IP : %s\n"
-"IP attribution: %s\n"
-"Οδηγός: %s"
-
-#: standalone/drakgw:312
-#, fuzzy, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"Μπορώ να κρατήσω τις τρέχουσες ρυθμίσεις και να υποθέσω ότι ήδη έχει "
-"ρυθμιστεί ο εξυπηρετητής DHCP, παρακαλώ ελέγξτε εάν έχω διαβάσει σωστά το "
-"Δίκτυο που χρησιμοποιείτε για το τοπικό σας δίκτυο, δεν θα πειράξωούτε θα "
-"αλλάξω τις ρυθμίσεις του εξυπηρετητή DHCP.\n"
-"\n"
-
-#: standalone/drakgw:319
-#, c-format
-msgid "Local Network adress"
-msgstr "Τοπική διεύθυνση δικτύου"
-
-#: standalone/drakgw:323
-#, fuzzy, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-"Ρύθμιση Εξυπηρετητή DHCP\n"
-"\n"
-"Εδώ μπορείτε επιλέξετε τις διάφορες επιλογές στη ρύθμιση του εξυπηρετητή "
-"DHCP\n"
-"Αν δεν ξέρετε τι σημαίνει αυτό, απλά αφήστε το ως έχει\n"
-"\n"
-
-#: standalone/drakgw:327
-#, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Αυτή τη) IP του εξυπηρετητή DHCP"
-
-#: standalone/drakgw:328
-#, c-format
-msgid "The DNS Server IP"
-msgstr "Η IP του εξυπηρετητή DNS"
-
-#: standalone/drakgw:329
-#, c-format
-msgid "The internal domain name"
-msgstr "Το εσωτερικό όνομα τομέα"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr "To όριο εκκίνησης DHCP"
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr "To όριο τερματισμού DHCP"
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr "Η προκαθορισμένη μίσθωση (σε δευτερόλεπτα)"
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Η μέγιστη μίσθωση (σε δευτερόλεπτα)"
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "Επαναρύθμιση διεπαφής και του εξυπηρετητή DHCP"
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Το Τοπικό Δίκτυο δεν τελειώνει με `.0', τερματισμός."
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Πιθανή διπλής διεύθυνσης LAN στην τρέχουσα ρύθμιση του %s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Ρύθμιση..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ρύθμιση, εγκατάσταση λογισμικού, εκκίνηση εξυπηρετητών..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Πρόβλημα κατά την εγκατάσταση του πακέτου %s"
-
-#: standalone/drakgw:598
-#, fuzzy, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-"Όλα έχουν ρυθμιστεί.\n"
-"Μπορείτε τώρα να μοιράζεστε τη σύνδεσή σας στο Διαδίκτυο με άλλους "
-"υπολογιστές στο τοπικό σας δίκτυο, με την χρήση αυτόματης ρύθμισης δικτύου "
-"(DHCP)."
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr ""
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-
-#: standalone/drakhelp:36
-#, fuzzy, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Κέντρο Ελέγχου Mandriva"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-
-#: standalone/drakperm:22
-#, c-format
-msgid "System settings"
-msgstr "Ρυθμίσεις συστήματος"
-
-#: standalone/drakperm:23
-#, fuzzy, c-format
-msgid "Custom settings"
-msgstr "Προσαρμοσμένες κατατμήσεις δίσκου"
-
-#: standalone/drakperm:24
-#, fuzzy, c-format
-msgid "Custom & system settings"
-msgstr "Προσαρμοσμένες κατατμήσεις δίσκου"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Επεξεργάσιμο"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Θέση"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Χρήστης"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Ομάδα"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Δικαιώματα"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr ""
-
-#: standalone/drakperm:107
-#, fuzzy, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"Το Drakperm χρησιμοποιείται για να δείτε τα αρχεία που χρειάζεστε για να "
-"φτιάξετε δικαιώματα, ιδιοκτήτες και ομάδες με το msec.\n"
-"Επίσης μπορείτε να επεξεργαστείτε τους δικούς σας κανόνες που θα "
-"αντικαταστήσουν τους προεπιλεγμένους κανόνες."
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Πάνω"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr "Μετακίνηση του επιλεγμένου κανόνα ένα επίπεδο πάνω"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Κάτω"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr "Μετακίνηση του επιλεγμένου κανόνα ένα επίπεδο κάτω"
-
-#: standalone/drakperm:123
-#, fuzzy, c-format
-msgid "Add a rule"
-msgstr "Προσθήκη ενός κανόνα"
-
-#: standalone/drakperm:123
-#, c-format
-msgid "Add a new rule at the end"
-msgstr "Προσθήκη νέου κανόνα στο τέλος"
-
-#: standalone/drakperm:124
-#, c-format
-msgid "Delete selected rule"
-msgstr "Διαγραφή επιλεγμένου κανόνα"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Επεξεργασία"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr "αναζήτηση"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "user"
-msgstr "χρήστης"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "ομάδα"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "other"
-msgstr "άλλο"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Αναγνωσμένα"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr ""
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Εγγραφή"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr ""
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Εκτέλεση"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr "Ορισμός UID"
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr "Χρήση id κατόχου για εκτέλεση"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr "Ορισμός GID"
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr "Χρήση id ομάδας για εκτέλεση"
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Χρήστης:"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Ομάδα:"
-
-#: standalone/drakperm:299
-#, c-format
-msgid "Current user"
-msgstr "Τρέχον χρήστη"
-
-#: standalone/drakperm:300
-#, fuzzy, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr "όταν επιλεγεί, ο ιδιοκτήτης και ομάδα δεν θα αλλάξουν"
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Επιλογή Θέσης"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Ιδιότητα"
-
-#: standalone/drakpxe:55
-#, c-format
-msgid "PXE Server Configuration"
-msgstr "Ρυθμίσεις Διακομιστή PXE"
-
-#: standalone/drakpxe:111
-#, c-format
-msgid "Installation Server Configuration"
-msgstr "Εγκατάσταση Ρυθμίσεων Διακομιστή"
-
-#: standalone/drakpxe:112
-#, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Πρόκειται να ρυθμίστε τον υπολογιστή σας για την εγκατάσταση το διακομιστή "
-"PXE ως εξυπηρετητή DHCP \n"
-"και διακομιστή TFTP ως διακομιστή εγκαταστάσεων.\n"
-"Με αυτή την επιλογή, άλλοι υπολογιστές στο τοπικό σας δίκτυο θα μπορούν να "
-"εγκατασταθούν με τη χρήση αυτού του υπολογιστή.\n"
-"\n"
-"Βεβαιωθείτε ότι έχετε ρυθμίσει την πρόσβαση στο Δίκτυο/Διαδίκτυο με τη χρήση "
-"του drakconnect πριν προχωρήσετε.\n"
-"\n"
-"Σημ. Θα πρέπει να έχετε μια κάρτα δικτύου για να ρυθμίσετε το Τοπικό σας "
-"Δίκτυο (LAN)."
-
-#: standalone/drakpxe:143
-#, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Παρακαλώ επιλέξτε ποια διεπαφή δικτύου θα χρησιμοποιήσετε για τον "
-"εξυπηρετητή DHCP."
-
-#: standalone/drakpxe:144
-#, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Διεπαφή %s (στο δίκτυο %s)"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"Ο εξυπηρετητής DHCP θα επιτρέπει άλλους υπολογιστές να ξεκινούν με τη χρήση "
-"του PXE με μια δοθείσα διεύθυνση\n"
-"\n"
-"Η διεύθυνση δικτύου είναι %s με χρήση μάσκα δικτύου%s.\n"
-"\n"
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr "Η IP εκκίνησης του DHCP"
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr "Η τελευταία ip του DHCP"
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"Παρακαλώ δηλώστε τη θέση που θα είναι προσβάσιμη η εικόνας εγκατάστασης.\n"
-"\n"
-"Αν δεν έχετε έναν υπάρχον κατάλογο, παρακαλώ αντιγράψετε τα περιεχόμενα του "
-"CD or DVD.\n"
-"\n"
-
-#: standalone/drakpxe:192
-#, c-format
-msgid "Installation image directory"
-msgstr "Εγκατάσταση καταλόγου εικόνας"
-
-#: standalone/drakpxe:196
-#, c-format
-msgid "No image found"
-msgstr "Δεν βρέθηκε εικόνα"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-"Δεν βρέθηκαν εικόνες CD ή DVD, παρακαλώ αντιγράψτε το πρόγραμμα εγκατάστασης "
-"και τα αρχεία rpm."
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"Παρακαλώ δηλώστε τη θέση του αρχείου auto_install.cfg file is located.\n"
-"\n"
-"Αφήστε το κενό αν δεν θέλετε να κάνετε χρήση της αυτόματης εγκατάστασης.\n"
-"\n"
-
-#: standalone/drakpxe:215
-#, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Θέση του αρχείου auto_install.cfg"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Κατάσταση"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, c-format
-msgid "Channel"
-msgstr "Κανάλι"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Δίκτυο:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Λειτουργία:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Κρυπτογράφηση:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr ""
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr ""
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr "Σύνδεση"
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr ""
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Κατάσταση"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Αποσύνδεση"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Ανανέωση"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "στο"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr ""
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr ""
-
-#: standalone/draksec:53
-#, c-format
-msgid "Ignore"
-msgstr "Παράβλεψη"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-"Περιγραφή των πεδίων:\n"
-"\n"
-
-#: standalone/draksec:168
-#, c-format
-msgid "(default value: %s)"
-msgstr "(Προεπιλεγμένη τιμή: %s)"
-
-#: standalone/draksec:210
-#, c-format
-msgid "Security Level:"
-msgstr "Επίπεδο ασφαλείας:"
-
-#: standalone/draksec:217
-#, c-format
-msgid "Security Administrator:"
-msgstr "Διαχειριστής Ασφαλείας:"
-
-#: standalone/draksec:219
-#, fuzzy, c-format
-msgid "Basic options"
-msgstr "Βασικές Επιλογές DrakSec"
-
-#: standalone/draksec:233
-#, c-format
-msgid "Network Options"
-msgstr "Επιλογές Δικτύου"
-
-#: standalone/draksec:233
-#, c-format
-msgid "System Options"
-msgstr "Επιλογές Συστήματος"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr "Περιοδικοί Έλεγχοι"
-
-#: standalone/draksec:298
-#, c-format
-msgid "Please wait, setting security level..."
-msgstr "Παρακαλώ περιμένετε, ρυθμίζεται το επίπεδο ασφαλείας..."
-
-#: standalone/draksec:304
-#, c-format
-msgid "Please wait, setting security options..."
-msgstr "Παρακαλώ περιμένετε, ορίζονται οι επιλογές ασφαλείας..."
-
-#: standalone/draksound:47
-#, c-format
-msgid "No Sound Card detected!"
-msgstr "Δεν βρέθηκε Κάρτα Ήχου!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Δεν βρέθηκε συσκευή Κάρτας 'Ήχου στο μηχάνημά σας. Παρακαλώ βεβαιωθείτε ότι "
-"η υποστηριζόμενη Κάρτα Ήχου σας είναι σωστά τοποθετημένη.\n"
-"\n"
-"\n"
-"Μπορείτε να επισκεφτείτε τη βάση δεδομένων υλικού στο:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/draksound:57
-#, fuzzy, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Σημείωση: Αν έχετε κάρτα ήχου ISA PnP, θα πρέπει να εκτελέσετε το πρόγραμμα "
-"sndconfig.  Απλά γράψτε \"sndconfig\" σε μια κονσόλα."
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"το πακέτο 'ImageMagick' είναι απαραίτητο για την ολοκλήρωση της ρύθμισης.\n"
-"Κάντε κλικ στο \"Εντάξει\" για να εγκαταστήσετε το ή \"Άκυρο\" για έξοδο"
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"συντεταγμένη x του πλαισίου κειμένου\n"
-"σε αριθμό χαρακτήρων"
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"συντεταγμένη y του πλαισίου κειμένου\n"
-"σε αριθμό χαρακτήρων"
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr "πλάτος κειμένου"
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr "ύψος πλαισίου κειμένου"
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"συντεταγμένη y της γραμμής προόδου\n"
-"από την επάνω αριστερή γωνία"
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"συντεταγμένη y της γραμμής προόδου\n"
-"από την επάνω αριστερή γωνία"
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr "το πλάτος της γραμμής προόδου"
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr "το ύψος της γραμμής προόδου"
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr "Εμφάνιση λογότυπου στην Κονσόλα"
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, c-format
-msgid "Theme name"
-msgstr "Όνομα θέματος"
-
-#: standalone/draksplash:77
-#, c-format
-msgid "final resolution"
-msgstr "τελική ανάλυση"
-
-#: standalone/draksplash:82
-#, c-format
-msgid "Save theme"
-msgstr "Aποθήκευση θέματος"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "αποθήκευση θέματος Bootsplash ..."
-
-#: standalone/draksplash:145
-#, c-format
-msgid "choose image"
-msgstr "επιλέξτε εικόνα"
-
-#: standalone/draksplash:162
-#, c-format
-msgid "ProgressBar color selection"
-msgstr "Επιλογή χρώματος γραμμής προόδου"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, fuzzy, c-format
-msgid "Add an UPS device"
-msgstr "Προσθήκη στοιχείου"
-
-#: standalone/drakups:83
-#, fuzzy, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-"Καλώς ορίσατε στο εργαλείο ρύθμισης ταχυδρομείου.\n"
-"\n"
-"Εδώ, θα μπορέσετε να ρυθμίσετε το σύστημα ειδοποίησης\n"
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, fuzzy, c-format
-msgid "Autodetection"
-msgstr "Αυτόματη ανίχνευση"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, c-format
-msgid "Detection in progress"
-msgstr "Ανίχνευση σε εξέλιξη"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Συγχαρητήρια"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr ""
-
-#: standalone/drakups:123
-#, fuzzy, c-format
-msgid "No new UPS devices was found"
-msgstr "Δεν βρέθηκε εικόνα"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, fuzzy, c-format
-msgid "UPS driver configuration"
-msgstr "Ρυθμίσεις κοινής χρήσης εκτυπωτών CUPS"
-
-#: standalone/drakups:128
-#, fuzzy, c-format
-msgid "Please select your UPS model."
-msgstr "Παρακαλώ δοκιμάστε το ποντίκι"
-
-#: standalone/drakups:129
-#, fuzzy, c-format
-msgid "Manufacturer / Model:"
-msgstr "Κατασκευαστή εκτυπωτή, μοντέλο"
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Όνομα:"
-
-#: standalone/drakups:145
-#, fuzzy, c-format
-msgid "The name of your ups"
-msgstr "το όνομα κατασκευαστή του επεξεργαστή"
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Θύρα:"
-
-#: standalone/drakups:149
-#, fuzzy, c-format
-msgid "The port on which is connected your ups"
-msgstr "Ο τύπος της θύρα στην οποία είναι συνδεδεμένο το ποντίκι σας."
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr ""
-
-#: standalone/drakups:250
-#, fuzzy, c-format
-msgid "UPS devices"
-msgstr "Υπηρεσίες"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Όνομα"
-
-#: standalone/drakups:269
-#, fuzzy, c-format
-msgid "UPS users"
-msgstr "Χρήστες"
-
-#: standalone/drakups:285
-#, fuzzy, c-format
-msgid "Access Control Lists"
-msgstr "πρόσβαση σε εργαλεία δικτύου"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr ""
-
-#: standalone/drakups:298
-#, c-format
-msgid "Rules"
-msgstr "Κανόνες"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Ενέργεια"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Επίπεδο"
-
-#: standalone/drakups:299
-#, fuzzy, c-format
-msgid "ACL name"
-msgstr "όνομα LVM;"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, fuzzy, c-format
-msgid "DrakUPS"
-msgstr "Dvorak (ΗΠΑ)"
-
-#: standalone/drakups:339
-#, fuzzy, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Δοκιμή ρυθμίσεων"
-
-#: standalone/drakvpn:73
-#, fuzzy, c-format
-msgid "DrakVPN"
-msgstr "Dvorak (ΗΠΑ)"
-
-#: standalone/drakvpn:95
-#, fuzzy, c-format
-msgid "The VPN connection is enabled."
-msgstr "Η Κοινή Σύνδεση στο Διαδίκτυο τώρα ενεργοποιήθηκε."
-
-#: standalone/drakvpn:96
-#, fuzzy, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Η ρύθμιση της κοινής σύνδεσης του Διαδικτύου έχει ήδη γίνει.\n"
-"Αυτή τη στιγμή είναι ενεργή.\n"
-"\n"
-"Τι θέλετε να κάνετε;"
-
-#: standalone/drakvpn:105
-#, fuzzy, c-format
-msgid "Disabling VPN..."
-msgstr "Απενεργοποίηση εξυπηρετητών..."
-
-#: standalone/drakvpn:114
-#, fuzzy, c-format
-msgid "The VPN connection is now disabled."
-msgstr "Η Κοινή Σύνδεση Διαδικτύου τώρα απενεργοποιήθηκε."
-
-#: standalone/drakvpn:121
-#, fuzzy, c-format
-msgid "VPN connection currently disabled"
-msgstr "Κοινή Σύνδεση Διαδικτύου απενεργοποιημένη"
-
-#: standalone/drakvpn:122
-#, fuzzy, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Η ρύθμιση της κοινής χρήσης διαδικτύου έχει ήδη γίνει.\n"
-"Είναι απενεργοποιημένη.\n"
-"\n"
-"Τι θέλετε να κάνετε:"
-
-#: standalone/drakvpn:135
-#, fuzzy, c-format
-msgid "Enabling VPN..."
-msgstr "Ενεργοποίηση εξυπηρετητών..."
-
-#: standalone/drakvpn:141
-#, fuzzy, c-format
-msgid "The VPN connection is now enabled."
-msgstr "Η Κοινή Σύνδεση στο Διαδίκτυο τώρα ενεργοποιήθηκε."
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr ""
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, fuzzy, c-format
-msgid "Kernel module."
-msgstr "Απομάκρυνση αρθρώματος"
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#: standalone/drakvpn:292
-#, fuzzy, c-format
-msgid "Security Policies"
-msgstr "Ειδοποιήσεις Ασφαλείας:"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr ""
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, fuzzy, c-format
-msgid "Configuration file"
-msgstr "Ρύθμιση"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, fuzzy, c-format
-msgid "%s entries"
-msgstr ", %s τομείς"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, fuzzy, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "καθημερινά"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Commit"
-msgstr "Commit"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, fuzzy, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "Ρύθμιση LAN"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "config setup"
-msgstr "επαναρύθμιση"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "conn %default"
-msgstr "εξ' ορισμού"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "normal conn"
-msgstr "Κανονική Κατάσταση"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, fuzzy, c-format
-msgid "Exists!"
-msgstr "Έξοδος"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:405
-#, fuzzy, c-format
-msgid "interfaces"
-msgstr "Διεπαφή"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr ""
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr ""
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr ""
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr ""
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr ""
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-
-#: standalone/drakvpn:451
-#, fuzzy, c-format
-msgid "PFS"
-msgstr "HFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr ""
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr ""
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr ""
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, c-format
-msgid "left"
-msgstr "αριστερά"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr ""
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr ""
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr ""
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:491
-#, fuzzy, c-format
-msgid "section name"
-msgstr "Όνομα σύνδεσης"
-
-#: standalone/drakvpn:492
-#, fuzzy, c-format
-msgid "authby"
-msgstr "Θέση"
-
-#: standalone/drakvpn:493
-#, c-format
-msgid "auto"
-msgstr "Ξ±Ο…Ο„ΟŒΞΌΞ±Ο„ΞΏ"
-
-#: standalone/drakvpn:499
-#, c-format
-msgid "right"
-msgstr "δεξιά"
-
-#: standalone/drakvpn:500
-#, fuzzy, c-format
-msgid "rightcert"
-msgstr "Υψηλότερο"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr ""
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr ""
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, fuzzy, c-format
-msgid "Edit section"
-msgstr "Επιλογή Θέσης"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, fuzzy, c-format
-msgid "Section names"
-msgstr "Όνομα σύνδεσης"
-
-#: standalone/drakvpn:590
-#, fuzzy, c-format
-msgid "Can not edit!"
-msgstr "Δεν βρέθηκε το %s στο %s"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, fuzzy, c-format
-msgid "Remove section"
-msgstr "Λίστα Αφαίρεσης"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr "μονοπάτι"
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "απομακρυσμένος"
-
-#: standalone/drakvpn:735
-#, fuzzy, c-format
-msgid "sainfo"
-msgstr "Πληροφορίες"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#: standalone/drakvpn:746
-#, fuzzy, c-format
-msgid "path type"
-msgstr "Αλλαγή τύπου"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, fuzzy, c-format
-msgid "real file"
-msgstr "Επιλέξτε αρχείο"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr ""
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr ""
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#: standalone/drakvpn:941
-#, fuzzy, c-format
-msgid "Sainfo source protocol"
-msgstr "Ευρωπαϊκό πρωτόκολλο"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr ""
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, fuzzy, c-format
-msgid "Sainfo destination protocol"
-msgstr "Εργαλείο Μετάβασης Windows "
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr ""
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, fuzzy, c-format
-msgid "Lifetime number"
-msgstr "ένας αριθμός"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr ""
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, fuzzy, c-format
-msgid "Authentication algorithm"
-msgstr "Πιστοποίηση"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1036
-#, fuzzy, c-format
-msgid "deflate"
-msgstr "εξ' ορισμού"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Απομακρυσμένος"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, fuzzy, c-format
-msgid "Exchange mode"
-msgstr "Τρόπος κλήσης"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, fuzzy, c-format
-msgid "Generate policy"
-msgstr "Ασφάλεια"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, fuzzy, c-format
-msgid "Passive"
-msgstr "Τμήμα Splash"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr ""
-
-#: standalone/drakvpn:1083
-#, fuzzy, c-format
-msgid "My certfile"
-msgstr "Επιλέξτε αρχείο"
-
-#: standalone/drakvpn:1084
-#, fuzzy, c-format
-msgid "Name of the certificate"
-msgstr "Όνομα εκτυπωτή"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr ""
-
-#: standalone/drakvpn:1086
-#, fuzzy, c-format
-msgid "Name of the private key"
-msgstr "Όνομα εκτυπωτή"
-
-#: standalone/drakvpn:1087
-#, fuzzy, c-format
-msgid "Peers certfile"
-msgstr "Επιλέξτε αρχείο"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr ""
-
-#: standalone/drakvpn:1089
-#, fuzzy, c-format
-msgid "Verify cert"
-msgstr "πολύ καλό"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr ""
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, fuzzy, c-format
-msgid "Peers identifier"
-msgstr "Εκτυπωτής"
-
-#: standalone/drakvpn:1115
-#, fuzzy, c-format
-msgid "Proposal"
-msgstr "Πρωτόκολλο"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1126
-#, fuzzy, c-format
-msgid "DH group"
-msgstr "oμάδα"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Εντολή"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr ""
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr ""
-
-#: standalone/drakvpn:1136
-#, fuzzy, c-format
-msgid "Upper-layer protocol"
-msgstr "Ευρωπαϊκό πρωτόκολλο"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "any"
-msgstr "Ημέρα"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Σημαία"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Κατεύθυνση"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "ipsec"
-msgstr "Msec"
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "discard"
-msgstr "απενεργοποιημένο"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "tunnel"
-msgstr "Κανάλι"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "transport"
-msgstr "απεσταλμένα"
-
-#: standalone/drakvpn:1145
-#, fuzzy, c-format
-msgid "Source/destination"
-msgstr "Σταθμός Εργασίας"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "εξ' ορισμού"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "use"
-msgstr "Ποντίκι"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "unique"
-msgstr "Μαρτινίκα"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr "USA (εναέρια)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr "USA (καλωδιακή)"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "Canada (cable)"
-msgstr "Καναδικό (Καλωδιακή)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr "Ιαπωνία (εναέρια)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr "Ιαπωνία (Καλωδιακή)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr "Κίνα (εναέρια)"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "West Europe"
-msgstr "Δυτική Ευρώπη"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "East Europe"
-msgstr "Ανατολική Ευρώπη"
-
-#: standalone/drakxtv:47
-#, c-format
-msgid "France [SECAM]"
-msgstr "Γαλλία [SECAM]"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr "Νέα Ζηλανδία"
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr "Καλωδιακή τηλεόραση Optus της Αυστραλίας"
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr ""
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr "Περιοχή:"
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr "Γίνεται αναζήτηση σταθμών τηλεόρασης ..."
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr "Αναζήτηση σταθμών τηλεόρασης"
-
-#: standalone/drakxtv:107
-#, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Προκλήθηκε σφάλμα κατά την αναζήτηση σταθμών τηλεόρασης"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr "Καλή σας μέρα!"
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Τώρα μπορείτε να εκτελέσετε το xawtv (μέσα από τα Χ Window!) !\n"
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr "Δεν βρέθηκε κάρτα τηλεόρασης!"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-"Δεν βρέθηκε κάρτα τηλεόρασης στο μηχάνημά σας.Παρακαλώ βεβαιωθείτε ότι μια "
-"υποστηριζόμενη κάρτα στο Linux είναι συνδεμένη.\n"
-"\n"
-"\n"
-"Μπορείτε να επισκεφτείτε την βάση δεδομένων στο: \n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-
-#: standalone/harddrake2:24
-#, c-format
-msgid "Alternative drivers"
-msgstr "Εναλλακτικοί οδηγοί"
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "η λίστα με εναλλακτικούς οδηγούς για την κάρτα ήχου σας"
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"αυτή είναι η φυσική θέση στην οποία είναι συνδεμένη η συσκευή (π.χ.PCI, "
-"USB, ...)"
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, c-format
-msgid "Bus identification"
-msgstr "Αναγνωριστικό θύρας"
-
-#: standalone/harddrake2:31
-#, fuzzy, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr "PCI συσκευή PCI"
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-"- συσκευές pci: δίνει τη θύρα PCI, τη συσκευή και λειτουργία αυτής της "
-"κάρτας\n"
-"- συσκευές eide: η συσκευή είναι συσκευή slave ή master\n"
-"- συσκευές scsi: ο δίαυλος scsi και τα χαρακτηριστικά της συσκευής scsi"
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-
-#: standalone/harddrake2:38
-#, fuzzy, c-format
-msgid "this field describes the device"
-msgstr "Αυτό πεδίο περιγραφή τη συσκευή"
-
-#: standalone/harddrake2:39
-#, c-format
-msgid "Old device file"
-msgstr "Παλαιό αρχείο συσκευής"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr "παλαιά στατική όνομα συσκευής του πακέτου dev"
-
-#: standalone/harddrake2:41
-#, c-format
-msgid "New devfs device"
-msgstr "Νέα συσκευή devfs"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "δημιουργήθηκε νέα δυναμική συσκευή από τον κεντρικό πυρήνα devfs"
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Άρθρωμα"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "το άρθρωμα του πυρήνα GNU/Linux που χειρίζεται την συσκευή"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "Extended partitions"
-msgstr "Δημιουργία νέας κατάτμησης"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "the number of extended partitions"
-msgstr "Ο αριθμός του επεξεργαστή"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Γεωμετρία"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, fuzzy, c-format
-msgid "Disk controller"
-msgstr "Ελεγκτές SMBus"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr "κλάση της συσκευής "
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Μοντέλο"
-
-#: standalone/harddrake2:50
-#, c-format
-msgid "hard disk model"
-msgstr "μοντέλο σκληρού δίσκου"
-
-#: standalone/harddrake2:51
-#, c-format
-msgid "network printer port"
-msgstr "θύρα εκτυπωτή δικτύου"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "Primary partitions"
-msgstr "Μορφοπ. κατατμήσ."
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "the number of the primary partitions"
-msgstr "Ο αριθμός του επεξεργαστή"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr "το όνομα κατασκευαστή της συσκευής"
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, fuzzy, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr ""
-"αυτή είναι η φυσική θέση στην οποία είναι συνδεμένη η συσκευή (π.χ.PCI, "
-"USB, ...)"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device #"
-msgstr "Υπηρεσίες"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device number"
-msgstr "ένας αριθμός"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, fuzzy, c-format
-msgid "PCI function number"
-msgstr "Όνομα σύνδεσης"
-
-#: standalone/harddrake2:57
-#, fuzzy, c-format
-msgid "Vendor ID"
-msgstr "Κατασκευαστής"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "Device ID"
-msgstr "Συσκευή: "
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "this is the numerical identifier of the device"
-msgstr "το όνομα κατασκευαστή της συσκευής"
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "Sub device ID"
-msgstr "Υπηρεσίες"
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr "το όνομα κατασκευαστή της συσκευής"
-
-#: standalone/harddrake2:61
-#, fuzzy, c-format
-msgid "Device USB ID"
-msgstr "Συσκευή: "
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "Cache size"
-msgstr "μέγεθος Cache"
-
-#: standalone/harddrake2:66
-#, fuzzy, c-format
-msgid "size of the (second level) cpu cache"
-msgstr "Μέγεθος της (δευτέρου επιπέδου) cpu cache"
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr "Σφάλμα Coma"
-
-#: standalone/harddrake2:69
-#, fuzzy, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Αν αυτή η συσκευή έχει το σφάλμα Cyrix 6x86 Coma"
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr "Οικογένεια Cpuid"
-
-#: standalone/harddrake2:70
-#, fuzzy, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr "Οικογένεια του επεξεργαστή (π.χ. 6 για κλάση i686)"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "Cpuid level"
-msgstr "Επίπεδο Cpuid"
-
-#: standalone/harddrake2:71
-#, fuzzy, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr "Επίπεδο πληροφοριών που μπορούν να βρεθούν μέσω των εντολών cpuid"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Συχνότητα (MHz)"
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr "Διακόπτες"
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr "Σφάλμα Fdiv"
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr "Το FPU είναι παρόν"
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr "Σφάλμα F00f"
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr ""
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-
-#: standalone/harddrake2:81
-#, fuzzy, c-format
-msgid "sub generation of the cpu"
-msgstr "Sub"
-
-#: standalone/harddrake2:82
-#, fuzzy, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr "Γενιά του επεξεργαστή (π.χ. 8 για Pentium III, ...)"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Όνομα μοντέλου"
-
-#: standalone/harddrake2:83
-#, fuzzy, c-format
-msgid "official vendor name of the cpu"
-msgstr "Το επίσημο όνομα κατασκευαστή του επεξεργαστή"
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr "το όνομα κατασκευαστή του επεξεργαστή"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr "Ταυτότητα επεξεργαστή"
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr "Ο αριθμός του επεξεργαστή"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "Model stepping"
-msgstr "Μοντέλο βηματισμού"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr ""
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr "το όνομα κατασκευαστή του επεξεργαστή"
-
-#: standalone/harddrake2:88
-#, fuzzy, c-format
-msgid "Write protection"
-msgstr "Αυτόματη ανίχνευση εκτυπωτών"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "Floppy format"
-msgstr "Φορμά Δισκέτας"
-
-#: standalone/harddrake2:92
-#, fuzzy, c-format
-msgid "format of floppies supported by the drive"
-msgstr "Φορμά για δισκέτες που μπορεί να δεχτεί ο οδηγός"
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Κανάλι EIDE/SCSI"
-
-#: standalone/harddrake2:97
-#, fuzzy, c-format
-msgid "Disk identifier"
-msgstr "Εκτυπωτής"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, fuzzy, c-format
-msgid "Logical unit number"
-msgstr "Τοπική μέτρηση"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, fuzzy, c-format
-msgid "Installed size"
-msgstr "Εγκατάσταση συστήματος"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, fuzzy, c-format
-msgid "Enabled Size"
-msgstr "ενεργοποίηση"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, fuzzy, c-format
-msgid "type of the memory device"
-msgstr "το όνομα κατασκευαστή της συσκευής"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Ταχύτητα"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, fuzzy, c-format
-msgid "Bank connections"
-msgstr "Καλωδιακή σύνδεση"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, fuzzy, c-format
-msgid "Device file"
-msgstr "Παλαιό αρχείο συσκευής"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, fuzzy, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "Προσομοίωση Κουμπιών"
-
-#: standalone/harddrake2:116
-#, fuzzy, c-format
-msgid "the type of the mouse"
-msgstr "Παρακαλώ δοκιμάστε το ποντίκι"
-
-#: standalone/harddrake2:117
-#, fuzzy, c-format
-msgid "the name of the mouse"
-msgstr "το όνομα κατασκευαστή του επεξεργαστή"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "Number of buttons"
-msgstr "Αριθμός πλήκτρων"
-
-#: standalone/harddrake2:118
-#, c-format
-msgid "the number of buttons the mouse has"
-msgstr "Ο αριθμός των πλήκτρων του ποντικιού"
-
-#: standalone/harddrake2:119
-#, fuzzy, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "Ο τύπος της θύρα στην οποία είναι συνδεδεμένο το ποντίκι σας."
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, c-format
-msgid "Identification"
-msgstr "Ταυτότητα"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Σύνδεση"
-
-#: standalone/harddrake2:137
-#, fuzzy, c-format
-msgid "Performances"
-msgstr "Προτίμηση: "
-
-#: standalone/harddrake2:138
-#, fuzzy, c-format
-msgid "Bugs"
-msgstr "Bus"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Κατατμήσεις"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Χαρακτηριστικά"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Επιλογές"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Βοήθεια"
-
-#: standalone/harddrake2:180
-#, c-format
-msgid "/Autodetect _printers"
-msgstr "/Εντοπισμός _εκτυπωτών"
-
-#: standalone/harddrake2:181
-#, c-format
-msgid "/Autodetect _modems"
-msgstr "/Εντοπισμός _μόντεμ"
-
-#: standalone/harddrake2:182
-#, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "/Εντοπισμός _οδηγών jaz"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Έξοδος"
-
-#: standalone/harddrake2:204
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Περιγραφή Πεδίων"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr "Βοήθεια Harddrake"
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-"Μόλις επιλέξετε μια συσκευή, θα μπορείτε να δείτε τις πληροφορίες σε πεδία "
-"που εμφανίζονται στο δεξί τμήμα με όνομα(\"Πληροφορίες\")"
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Αναφορά Bug"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Σχετικά με..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr "Σχετικά με το Harddrake"
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, fuzzy, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-"Αυτό είναι το HardDrake, ένα εργαλείο ρύθμισης της Mandriva Linux\n"
-"<span foreground=\"royalblue3\">Έκδοση:</span> %s\n"
-"<span foreground=\"royalblue3\">Δημιουργός:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-
-#: standalone/harddrake2:240
-#, fuzzy, c-format
-msgid "Harddrake2"
-msgstr "HardDrake"
-
-#: standalone/harddrake2:254
-#, c-format
-msgid "Detected hardware"
-msgstr "Υλικό που ανιχνεύθηκε"
-
-#: standalone/harddrake2:259
-#, c-format
-msgid "Configure module"
-msgstr "Ρύθμιση αρθρώματος"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr "Εκτέλεση εργαλείο ρύθμισης"
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "Άγνωστο"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Άγνωστο"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Διάφορα"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-"Κάντε κλικ σε μια συσκευή στο αριστερό τμήμα για να δείτε εδώ τις "
-"πληροφορίες."
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "secondary"
-msgstr "δευτερεύουσα"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr "πρωτεύουσα"
-
-#: standalone/harddrake2:396
-#, fuzzy, c-format
-msgid "burner"
-msgstr "Εκτυπωτής"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Λογαριασμός:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Κωδικός πρόσβασης:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Όνομα συστήματος:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Παρακαλώ επιλέξτε την διάταξη του πληκτρολογίου."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Θέλετε το BackSpace να επιστρέφει Delete στην κονσόλα;"
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Η αλλαγή έγινε, αλλά για να ισχύσει θα πρέπει να γίνει αποσύνδεση"
-
-#: standalone/logdrake:50
-#, fuzzy, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Επεξήγηση Εργαλείων της Mandriva"
-
-#: standalone/logdrake:51
-#, fuzzy, c-format
-msgid "Logdrake"
-msgstr "logdrake"
-
-#: standalone/logdrake:64
-#, c-format
-msgid "Show only for the selected day"
-msgstr "Εμφάνιση μόνο για την επιλεγμένη ημέρα"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Αρχείο/_Νέο"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Αρχείο/Ά_νοιγμα"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Αρχείο/Απο_θήκευση"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Αρχείο/Αποθήκευση _Ως"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Αρχείο/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Επιλογές/Τεστ"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Βοήθεια/_Σχετικά με..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr ""
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr ""
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr ""
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr ""
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "αναζήτηση"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Ένα εργαλείο για να βλέπετε τα log σας"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Ρυθμίσεις"
-
-#: standalone/logdrake:134
-#, fuzzy, c-format
-msgid "Matching"
-msgstr "ταιριάζει"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "αλλά δεν ταιριάζει"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Επιλέξτε ένα αρχείο"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Ημερολόγιο"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Περιεχόμενο του αρχείου"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr "Ειδοποίηση Ταχυδρομείου"
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr ""
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "παρακαλώ περιμένετε, επεξεργασία αρχείου: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Εξυπηρετητής Apache World Wide Web"
-
-#: standalone/logdrake:378
-#, c-format
-msgid "Domain Name Resolver"
-msgstr ""
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "Διακομιστής Ftp"
-
-#: standalone/logdrake:380
-#, c-format
-msgid "Postfix Mail Server"
-msgstr "Εξυπηρετητής Ταχυδρομείου Postfix"
-
-#: standalone/logdrake:381
-#, c-format
-msgid "Samba Server"
-msgstr "Εξυπηρετητής Samba"
-
-#: standalone/logdrake:383
-#, c-format
-msgid "Webmin Service"
-msgstr "Υπηρεσία Webmin"
-
-#: standalone/logdrake:384
-#, c-format
-msgid "Xinetd Service"
-msgstr "Υπηρεσία Xinetd"
-
-#: standalone/logdrake:395
-#, fuzzy, c-format
-msgid "Configure the mail alert system"
-msgstr "Αλλαγή συστήματος εκτύπωσης"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:403
-#, c-format
-msgid "Mail alert configuration"
-msgstr "Ρύθμιση ειδοποίησης Ταχυδρομείου"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Καλώς ορίσατε στο εργαλείο ρύθμισης ταχυδρομείου.\n"
-"\n"
-"Εδώ, θα μπορέσετε να ρυθμίσετε το σύστημα ειδοποίησης\n"
-
-#: standalone/logdrake:407
-#, c-format
-msgid "What do you want to do?"
-msgstr "Τι θέλετε να κάνετε;"
-
-#: standalone/logdrake:414
-#, fuzzy, c-format
-msgid "Services settings"
-msgstr "Ρυθμίσεις υπηρεσίας"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-"Θα λάβετε μια ειδοποίηση εάν μια από τις επιλεγμένες υπηρεσίες πάψει να "
-"εκτελείται"
-
-#: standalone/logdrake:422
-#, fuzzy, c-format
-msgid "Load setting"
-msgstr "Φόρτωση ρυθμίσεων"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-"Θα λάβετε μια ειδοποίηση εάν το φορτίο είναι μεγαλύτερο από αυτή την τιμή"
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr ""
-
-#: standalone/logdrake:429
-#, fuzzy, c-format
-msgid "Alert configuration"
-msgstr "Ρύθμιση ειδοποιήσεων"
-
-#: standalone/logdrake:430
-#, c-format
-msgid "Please enter your email address below "
-msgstr "Παρακαλώ εισάγετε την ηλεκτρονική σας διεύθυνση"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr ""
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr ""
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Αποθήκευση Ως.."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Παρακαλώ επιλέξτε τύπο ποντικιού."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Εξομοίωση τρίτου πλήκτρου;"
-
-#: standalone/mousedrake:61
-#, fuzzy, c-format
-msgid "Mouse test"
-msgstr "Mouse Systems"
-
-#: standalone/mousedrake:64
-#, fuzzy, c-format
-msgid "Please test your mouse:"
-msgstr "Παρακαλώ δοκιμάστε το ποντίκι"
-
-#: standalone/net_applet:45
-#, fuzzy, c-format
-msgid "Network is up on interface %s"
-msgstr "Συσκευή δικτύου"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, fuzzy, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Η λειτουργικότητα του δικτύου δεν ρυθμίστηκε"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, c-format
-msgid "Connect %s"
-msgstr "Σύνδεση %s"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, c-format
-msgid "Disconnect %s"
-msgstr "Αποσύνδεση %s"
-
-#: standalone/net_applet:70
-#, fuzzy, c-format
-msgid "Monitor Network"
-msgstr "Επαναφορά μέσω δικτύου"
-
-#: standalone/net_applet:71
-#, fuzzy, c-format
-msgid "Configure Network"
-msgstr "Ρύθμιση δικτύου"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "Διεπαφή"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Προφίλ"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr ""
-
-#: standalone/net_applet:223
-#, fuzzy, c-format
-msgid "Interactive intrusion detection"
-msgstr "Διαδραστικός σχεδιαστής μαθηματικών συναρτήσεων"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr ""
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, fuzzy, c-format
-msgid "The %s service has been attacked by %s."
-msgstr "Το συμβάν έχει αλλάξει."
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, fuzzy, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Ανιχνεύθηκε ρύθμιση του Τοίχους Προστασίας!"
-
-#: standalone/net_applet:301
-#, fuzzy, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Θέλετε να τερματίσετε το παιχνίδι;"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, fuzzy, c-format
-msgid "Attack details"
-msgstr "Χωρίς λεπτομέρειες"
-
-#: standalone/net_applet:322
-#, fuzzy, c-format
-msgid "Attack time: %s"
-msgstr "Ενέργεια: %s"
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Συσκευή δικτύου: %s"
-
-#: standalone/net_applet:324
-#, fuzzy, c-format
-msgid "Attack type: %s"
-msgstr "Τύπος πρόσβασης: %s\n"
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Πρωτόκολλο: %s"
-
-#: standalone/net_applet:326
-#, fuzzy, c-format
-msgid "Attacker IP address: %s"
-msgstr "Στατική διεύθυνση IP :"
-
-#: standalone/net_applet:327
-#, fuzzy, c-format
-msgid "Attacker hostname: %s"
-msgstr "Εγκαθίδρυση όνομα συστήματος %s: "
-
-#: standalone/net_applet:328
-#, fuzzy, c-format
-msgid "Service attacked: %s"
-msgstr "_Τύπος υπηρεσίας:"
-
-#: standalone/net_applet:329
-#, fuzzy, c-format
-msgid "Port attacked: %s"
-msgstr "Θύρα: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, c-format
-msgid "Network Monitoring"
-msgstr "Παρακολούθηση Δικτύου"
-
-#: standalone/net_monitor:104
-#, fuzzy, c-format
-msgid "Global statistics"
-msgstr "Στατιστικά"
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Μέσος όρος"
-
-#: standalone/net_monitor:108
-#, fuzzy, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr "Ταχύτητα Αποστολής:"
-
-#: standalone/net_monitor:109
-#, fuzzy, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr "Ταχύτητα Λήψης:"
-
-#: standalone/net_monitor:113
-#, fuzzy, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr "Ώρα Σύνδεσης: "
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Παρακαλώ περιμένετε, δοκιμάζεται η σύνδεση..."
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, fuzzy, c-format
-msgid "Disconnecting from Internet "
-msgstr "Αποσύνδεση από το Διαδίκτυο"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, fuzzy, c-format
-msgid "Connecting to Internet "
-msgstr "Σύνδεση στο Διαδίκτυο"
-
-#: standalone/net_monitor:232
-#, fuzzy, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Η αποσύνδεση από το διαδίκτυο απέτυχε."
-
-#: standalone/net_monitor:233
-#, fuzzy, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Η αποσύνδεση από το Διαδίκτυο ολοκληρώθηκε."
-
-#: standalone/net_monitor:235
-#, c-format
-msgid "Connection complete."
-msgstr "Η σύνδεση έγινε."
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-"Η σύνδεση απέτυχε.\n"
-"Επαληθεύστε τις ρυθμίσεις σας στο Κέντρο Ελέγχου Mandriva Linux."
-
-#: standalone/net_monitor:341
-#, c-format
-msgid "Color configuration"
-msgstr "Ρύθμιση χρωμάτων"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr "αποστολή: "
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr "ληφθέντα:"
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr "μέσος όρος"
-
-#: standalone/net_monitor:406
-#, c-format
-msgid "Local measure"
-msgstr "Τοπική μέτρηση"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-"Προσοχή ανιχνεύθηκε μια άλλη σύνδεση στο διαδίκτυο, που ίσως χρησιμοποιεί το "
-"δίκτυό σας"
-
-#: standalone/net_monitor:478
-#, fuzzy, c-format
-msgid "No internet connection configured"
-msgstr "Ρύθμιση σύνδεσης Διαδικτύου"
-
-#: standalone/printerdrake:68
-#, c-format
-msgid "Reading data of installed printers..."
-msgstr "Ανάγνωση δεδομένων των εγκατεστημένων εκτυπωτών..."
-
-#: standalone/printerdrake:116
-#, fuzzy, c-format
-msgid "%s Printer Management Tool"
-msgstr "Κοινή χρήση εκτυπωτών"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Ενέργειες"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Προσθήκη εκτυπωτή"
-
-#: standalone/printerdrake:131
-#, c-format
-msgid "/Set as _Default"
-msgstr "/Ορισμός ως ε_ξ ορισμού"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Επεξεργασία"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Διαγραφή"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Για Προχωρημένους"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Ανανέωση"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Ρύθμιση CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Αναζήτηση:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Εφαρμογή φίλτρου"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr ""
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Printer Name"
-msgstr "Όνομα εκτυπωτή"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Τύπος σύνδεσης"
-
-#: standalone/printerdrake:218
-#, fuzzy, c-format
-msgid "Server Name"
-msgstr "Όνομα Διακομιστή:"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, fuzzy, c-format
-msgid "Add Printer"
-msgstr "Εκτυπωτής"
-
-#: standalone/printerdrake:226
-#, fuzzy, c-format
-msgid "Add a new printer to the system"
-msgstr "Προσθήκη μιας ομάδας"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, c-format
-msgid "Set as default"
-msgstr "Ορισμός ως προεπιλογής"
-
-#: standalone/printerdrake:229
-#, fuzzy, c-format
-msgid "Set selected printer as the default printer"
-msgstr "Ορισμός αυτού του εκτυπωτή ως προεπιλεγμένου"
-
-#: standalone/printerdrake:232
-#, fuzzy, c-format
-msgid "Edit selected printer"
-msgstr "Επεξεργασία επιλεγμένου εξυπηρετητή"
-
-#: standalone/printerdrake:235
-#, fuzzy, c-format
-msgid "Delete selected printer"
-msgstr "Διαγραφή επιλεγμένου κανόνα"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Ανανέωση της λίστας"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, fuzzy, c-format
-msgid "Configure CUPS"
-msgstr "Ρύθμιση Χ"
-
-#: standalone/printerdrake:241
-#, fuzzy, c-format
-msgid "Configure CUPS printing system"
-msgstr "Αλλαγή συστήματος εκτύπωσης"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Ενεργοποιημένο"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Ανενεργό"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Δημιουργοί: "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, fuzzy, c-format
-msgid "Printer Management %s"
-msgstr "Κοινή χρήση εκτυπωτών"
-
-#: standalone/scannerdrake:51
-#, fuzzy, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr "Το πακέτο %s πρέπει να αναβαθμιστεί. Θέλετε να το εγκαταστήσετε;"
-
-#: standalone/scannerdrake:55
-#, fuzzy, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Scannerdrake"
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr ""
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, c-format
-msgid "Searching for configured scanners..."
-msgstr "Γίνεται αναζήτηση για ρυθμισμένους σαρωτές ..."
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, c-format
-msgid "Searching for new scanners..."
-msgstr "Γίνεται αναζήτηση για νέους σαρωτές ..."
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr "Επαναδημιουργία λίστας με τους ρυθμισμένους σαρωτές ..."
-
-#: standalone/scannerdrake:101
-#, fuzzy, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr "Το %s δεν υποστηρίζεται από αυτή την έκδοση του Mandriva Linux."
-
-#: standalone/scannerdrake:104
-#, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Το %s βρέθηκε στο %s,να ρυθμιστεί αυτόματα;"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-"το %s δεν είναι στη βάση δεδομένων των σαρωτών, να ρυθμιστεί χειροκίνητα;"
-
-#: standalone/scannerdrake:131
-#, c-format
-msgid "Select a scanner model"
-msgstr "Επιλέξτε ένα μοντέλο σαρωτή"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, c-format
-msgid "Detected model: %s"
-msgstr "Βρέθηκε το μοντέλο: %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Θύρα: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr ""
-
-#: standalone/scannerdrake:144
-#, fuzzy, c-format
-msgid "The %s is not supported under Linux."
-msgstr "Το %s δεν υποστηρίζεται από αυτή την έκδοση του Mandriva Linux."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr ""
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr ""
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr ""
-
-#: standalone/scannerdrake:200
-#, fuzzy, c-format
-msgid "Select firmware file"
-msgstr "Επιλέξτε αρχείο"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr ""
-
-#: standalone/scannerdrake:258
-#, fuzzy, c-format
-msgid "Select firmware file for the %s"
-msgstr "Επιλέξτε αρχείο"
-
-#: standalone/scannerdrake:276
-#, fuzzy, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Επιλέξτε αρχείο"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr ""
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr "Το %s δεν υποστηρίζεται"
-
-#: standalone/scannerdrake:304
-#, fuzzy, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-"Το %s πρέπει να ρυθμιστεί από το printerdrake.\n"
-"Μπορείτε να εκκινήσετε το printerdrake από το Κέντρο Ελέγχου Mandriva από το "
-"τμήμα Υλικό."
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, c-format
-msgid "Auto-detect available ports"
-msgstr "Διαθέσιμες θύρες αυτόματου εντοπισμού"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "Παρακαλώ επιλέξτε την συσκευή στην οποία είναι συνδεμένο το %s"
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-"(Σημείωση: Στις παράλληλες θύρες δεν μπορεί να γίνει αυτόματος εντοπισμός)"
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, c-format
-msgid "choose device"
-msgstr "Επιλέξτε συσκευή"
-
-#: standalone/scannerdrake:347
-#, c-format
-msgid "Searching for scanners..."
-msgstr "Γίνεται αναζήτηση για σαρωτές ..."
-
-#: standalone/scannerdrake:383
-#, fuzzy, c-format
-msgid "Setting up kernel modules..."
-msgstr "Αποθήκευση πληροφ. χρήστη..."
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, fuzzy, c-format
-msgid "Attention!"
-msgstr "Έλξη"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, fuzzy, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-"Το %s σας έχει ρυθμιστεί. \n"
-"Μπορείτε τώρα να σαρώσετε έγγραφα με το \"XSane\" από το Πολυμέσα/Γραφικά "
-"από μενού εφαρμογών."
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, fuzzy, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr "Ενεργοποίηση ρυθμίσεων tos"
-
-#: standalone/scannerdrake:406
-#, fuzzy, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-"Το %s σας έχει ρυθμιστεί. \n"
-"Μπορείτε τώρα να σαρώσετε έγγραφα με το \"XSane\" από το Πολυμέσα/Γραφικά "
-"από μενού εφαρμογών."
-
-#: standalone/scannerdrake:431
-#, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr ""
-"Οι παρακάτω σαρωτές\n"
-"\n"
-"%s\n"
-"είναι διαθέσιμοι στο σύστημά σας\n"
-
-#: standalone/scannerdrake:432
-#, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr ""
-"Ο παρακάτω σαρωτής\n"
-"\n"
-"%s\n"
-"είναι διαθέσιμος στο σύστημά σας\n"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Δεν βρέθηκαν σαρωτές που να είναι διαθέσιμοι στο σύστημά σας.\n"
-
-#: standalone/scannerdrake:452
-#, c-format
-msgid "Search for new scanners"
-msgstr "Αναζήτηση για νέους σαρωτές"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr "Προσθήκη σαρωτή χειροκίνητα"
-
-#: standalone/scannerdrake:465
-#, fuzzy, c-format
-msgid "Install/Update firmware files"
-msgstr "Επιλέξτε αρχείο"
-
-#: standalone/scannerdrake:471
-#, c-format
-msgid "Scanner sharing"
-msgstr "Κοινή χρήση σαρωτών"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, c-format
-msgid "All remote machines"
-msgstr "Όλα τα απομακρυσμένα μηχανήματα"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, c-format
-msgid "This machine"
-msgstr "Αυτό το μηχάνημα"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-"Εδώ μπορείτε να επιλέξετε αν οι συνδεμένοι σαρωτές αυτού το μηχανήματος θα "
-"είναι προσβάσιμοι από απομακρυσμένα μηχανήματα και από ποια."
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"Επίσης εδώ μπορείτε να ορίσετε αν σαρωτές που βρίσκονται σε απομακρυσμένα "
-"μηχανήματα θα είναι διαθέσιμα σε αυτό το μηχάνημα."
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-"Οι σαρωτές αυτού του μηχανήματος είναι διαθέσιμοι σε άλλους υπολογιστές"
-
-#: standalone/scannerdrake:588
-#, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Κοινόχρηστοι σαρωτές στους υπολογιστές: "
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr "Χρήση σαρωτών σε απομακρυσμένους υπολογιστές"
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Χρήση των σαρωτών στους υπολογιστές:"
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, c-format
-msgid "Sharing of local scanners"
-msgstr "Κοινή χρήση τοπικών σαρωτών"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-"Αυτά είναι τα μηχανήματα όπου οι τοπικά συνδεμένοι σαρωτές(ης) πρέπει να "
-"είναι διαθέσιμοι:"
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, c-format
-msgid "Add host"
-msgstr "Προσθήκη υπολογιστή"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, c-format
-msgid "Edit selected host"
-msgstr "Επεξεργασία επιλεγμένου υπολογιστή"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, c-format
-msgid "Remove selected host"
-msgstr "Αφαίρεση επιλεγμένου υπολογιστή"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr "Όνομα/IP διεύθυνση του υπολογιστή:"
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-"Επιλέξτε τον υπολογιστή του οποίου οι τοπικοί σαρωτές θα γίνουν διαθέσιμοι:"
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Πρέπει να ορίστε τον δικτυακό όνομα ή την IP διεύθυνση.\n"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-"Ο υπολογιστής είναί ήδη στη λίστα, δεν μπορείτε να τον προσθέσετε ξανά.\n"
-
-#: standalone/scannerdrake:782
-#, c-format
-msgid "Usage of remote scanners"
-msgstr "Χρήση των απομακρυσμένων σαρωτών"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-"Αυτά είναι τα μηχανήματα από όπου οι σαρωτές θα πρέπει να χρησιμοποιηθούν:"
-
-#: standalone/scannerdrake:940
-#, fuzzy, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr "Το πακέτο %s πρέπει να αναβαθμιστεί. Θέλετε να το εγκαταστήσετε;"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr ""
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "Ορισμένες συσκευές στο τμήμα υλικού \"%s\" αφαιρέθηκαν:\n"
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, fuzzy, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Ορισμένες συσκευές προστέθηκαν:\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr ""
-
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Ανίχνευση υλικού σε εξέλιξη"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, fuzzy, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Θέλετε να δοκιμάσετε τις ρυθμίσεις;"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Επιλέξτε γλώσσα"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Άδεια Χρήσης"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Ρύθμιση ποντικιού"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Εντοπισμός δίσκου"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Επιλέξτε εγκατάσταση"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Επιλέξτε πληκτρολόγιο"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Καταμερισμός"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Μορφοπ. κατατμήσ."
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Επιλογή πακέτων"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Εγκατάσταση συστήματος"
-
-#: steps.pm:25
-#, fuzzy, c-format
-msgid "Administrator password"
-msgstr "Κωδικός πρόσβασης root"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Προσθήκη χρήστη"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Ρύθμιση δικτύου"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Πρόγραμμα εκκίνησης"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Ρύθμιση Χ"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Ρύθμιση υπηρεσιών"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Αναβαθμίσεις"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Έξοδος"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Σωστό;"
-
-#: ugtk2.pm:968
-#, fuzzy, c-format
-msgid "No file chosen"
-msgstr "επιλογέας αρχείου"
-
-#: ugtk2.pm:970
-#, fuzzy, c-format
-msgid "You have chosen a file, not a directory"
-msgstr "Πρέπει να καθορίσετε αρχείο, όχι κατάλογο.\n"
-
-#: ugtk2.pm:972
-#, fuzzy, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Το όνομα '/' μπορεί να είναι μόνο κατάλογος, όχι ένα κλειδί"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such directory"
-msgstr "Δεν είναι κατάλογος"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such file"
-msgstr "Δεν υπάρχει αρχείο `%s'\n"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Ανάπτυξη δέντρου"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Σύμπτυξη δέντρου"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Εναλλαγή μεταξύ επίπεδης και ομαδικής ταξινόμησης"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-"Το %s δεν είναι εγκατεστημένο επιλέξτε \"Επόμενο\" για εγκατάσταση η \"Άκυρο"
-"\" για έξοδο"
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Η εγκατάσταση απέτυχε"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Το σύστημά σας δεν έχει αρκετούς πόρους. Μπορεί να αντιμετωπίσετε "
-#~ "προβλήματα\n"
-#~ "στην εγκατάσταση του Mandriva Linux. Εάν συμβεί αυτό, μπορείτε να "
-#~ "δοκιμάσετε εγκατάσταση κειμένου.\n"
-#~ "Πατήστε F1 κατά την εκκίνηση από CDROM, μετά γράψτε `text'."
-
-# fuzzy
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Σύνδεση με την τοποθεσία της Mandriva Linux για λήψη των διαθέσιμων τόπων "
-#~ "λήψης..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Εγκατάσταση Mandriva Linux %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "ΠΡΟΣΟΧΗ: Αυτή η συσκευή είναι ήδη ρυθμισμένη για να συνδέεται με το  "
-#~ "Διαδίκτυο.\n"
-#~ "Απλά πατήστε OK για να κρατήσετε τις υπάρχουσες ρυθμίσεις.\n"
-#~ "Αλλάζοντας τα παρακάτω πεδία θα αλλάξετε την υπάρχουσα ρύθμιση."
-
-#, fuzzy
-#~ msgid "Dynamic IP Address Pool:"
-#~ msgstr "Διεύθυνση:"
-
-#, fuzzy
-#~ msgid "hd"
-#~ msgstr "Τσαντ"
-
-#, fuzzy
-#~ msgid "tape"
-#~ msgstr "Ταινία"
-
-#~ msgid "WebDAV remote site already in sync!"
-#~ msgstr "Το απομακρυσμένο WebDAV είναι ήδη σε συγχρονισμό!"
-
-#~ msgid "WebDAV transfer failed!"
-#~ msgstr "Η μεταφορά WebDAV απέτυχε!"
-
-#, fuzzy
-#~ msgid ""
-#~ "Maximum size\n"
-#~ " allowed for Drakbackup (MB)"
-#~ msgstr ""
-#~ "Παρακαλώ επιλέξτε το μέγιστο μέγεθος\n"
-#~ "που επιτρέπεται στο Drakbackup"
-
-#~ msgid "\t-Network by webdav.\n"
-#~ msgstr "\t-Δίκτυο μέσω webdav.\n"
-
-#~ msgid "first step creation"
-#~ msgstr "πρώτο βήμα δημιουργίας"
-
-#~ msgid "choose image file"
-#~ msgstr "Επιλέξτε μια εικόνα"
-
-#~ msgid "Browse"
-#~ msgstr "Αναζήτηση"
-
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Ρύθμιση εικόνας bootsplash"
-
-#~ msgid "the color of the progress bar"
-#~ msgstr "Το χρώμα της γραμμής προόδου"
-
-#~ msgid "Preview"
-#~ msgstr "Προεπισκόπηση"
-
-#~ msgid "Choose color"
-#~ msgstr "Επιλέξτε χρώμα"
-
-#~ msgid "Notice"
-#~ msgstr "Σημείωση"
-
-#~ msgid "This theme does not yet have a bootsplash in %s!"
-#~ msgstr "Αυτό το θέμα δεν έχει ακόμα κάποιο bootsplash στο %s !"
-
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Πρέπει να επιλέξτε πρώτα μια εικόνα!"
-
-#~ msgid "Generating preview..."
-#~ msgstr "Δημιουργία προεπισκόπησης ..."
-
-#~ msgid "%s BootSplash (%s) preview"
-#~ msgstr "%s Προεπισκόπηση (%s)Bootsplash"
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Δεν υπάρχει διαθέσιμος οδηγός δισκέτας"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr "Παρακαλώ εισάγετε τη δισκέτα Αναβάθμισης Αρθρωμάτων στον οδηγό %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Γιουγκοσλαβικό (λατινικό)"
-
-#~ msgid "No network card"
-#~ msgstr "δεν βρέθηκε κάρτα δικτύου"
-
-#~ msgid "No browser available! Please install one"
-#~ msgstr "Δεν βρέθηκε περιηγητής! Παρακαλώ εγκαταστήστε τον"
-
-#~ msgid ""
-#~ "No browser is installed on your system, Please install one if you want to "
-#~ "browse the help system"
-#~ msgstr ""
-#~ "Δεν βρέθηκε περιηγητής στο σύστημά σας, Παρακαλώ εγκαταστήστε έναν αν "
-#~ "θέλετε να περιηγηθείτε στο σύστημα βοήθειας"
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Εισάγετε μια δισκέτα στον οδηγό δισκέτας\n"
-#~ "Όλα τα δεδομένα σε αυτή τη δισκέτα θα χαθούν"
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "Εισάγετε μια μορφοποιημένη δισκέτα FAT στον οδηγό %s"
-
-#~ msgid "This floppy is not FAT formatted"
-#~ msgstr "Αυτή η δισκέτα δεν έχει μορφοποίηση FAT"
-
-#~ msgid ""
-#~ "To use this saved packages selection, boot installation with ``linux "
-#~ "defcfg=floppy''"
-#~ msgstr ""
-#~ "Για να χρησιμοποιήσετε αυτήν την αποθηκευμένη επιλογή πακέτων, ξεκινήστε "
-#~ "την εγκατάσταση με ``linux defcfg=floppy''"
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Φόρτωση/Αποθήκευση σε δισκέτα"
-
-#~ msgid ""
-#~ "Please choose load or save package selection on floppy.\n"
-#~ "The format is the same as auto_install generated floppies."
-#~ msgstr ""
-#~ "Παρακαλώ επιλέξτε τη φόρτωση ή αποθήκευση των επιλογής πακέτων στη "
-#~ "δισκέτα.\n"
-#~ "Η μορφοποίηση είναι η ίδια με τις δισκέτες αυτόματης εγκατάστασης."
-
-#~ msgid "Load from floppy"
-#~ msgstr "Φόρτωση από δισκέτα"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Αποθήκευση σε δισκέτα"
-
-#~ msgid "Package selection"
-#~ msgstr "Επιλογή πακέτων"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "Φορτώνεται από δισκέτα"
-
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Εισάγετε δισκέτα που περιέχει την επιλογή πακέτων"
-
-#, fuzzy
-#~ msgid "Active Firewall : intrusion detected"
-#~ msgstr "Ανιχνεύθηκε ρύθμιση του Τοίχους Προστασίας!"
-
-#, fuzzy
-#~ msgid "Do you want to blacklist the attacker ?"
-#~ msgstr "Θέλετε να τερματίσετε το παιχνίδι;"
-
-#~ msgid "Application:"
-#~ msgstr "Εφαρμογή:"
-
-#~ msgid "Release: "
-#~ msgstr "Έκδοση:"
-
-#, fuzzy
-#~ msgid "Summary: "
-#~ msgstr "Περίληψη"
-
-#, fuzzy
-#~ msgid "Submit kernel version"
-#~ msgstr "έκδοση πυρήνα"
-
-#, fuzzy
-#~ msgid "connecting to %s..."
-#~ msgstr "σύνδεση στον οδηγό Bugzilla ..."
-
-#, fuzzy
-#~ msgid "Please enter a package name."
-#~ msgstr "Παρακαλώ εισάγετε όνομα χρήστη"
-
-#, fuzzy
-#~ msgid "Please enter summary text."
-#~ msgstr "Παρακαλώ εισάγετε το όνομα χρήστη"
-
-#, fuzzy
-#~ msgid "Loading printer configuration... Please wait"
-#~ msgstr "Αλλαγή ρυθμίσεων εκτυπωτή"
-
-#, fuzzy
-#~ msgid "The "
-#~ msgstr "Θέματα"
-
-#, fuzzy
-#~ msgid "%s (was %s)"
-#~ msgstr "%s (Θύρα %s)"
-
-#~ msgid "Root password"
-#~ msgstr "Κωδικός Root"
-
-#, fuzzy
-#~ msgid "Do you want to recover your system?"
-#~ msgstr "Θέλετε να χρησιμοποιήσετε το aboot;"
-
-#, fuzzy
-#~ msgid "Samba server"
-#~ msgstr "Εξυπηρετητής Samba"
-
-#~ msgid "Move"
-#~ msgstr "Μετακίνηση"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "Σε ποιόν δίσκο θέλετε να μετακινηθείτε;"
-
-#~ msgid "Sector"
-#~ msgstr "Τομέας"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "Σε ποιόν τομέα θέλετε να μετακινηθείτε;"
-
-#~ msgid "Moving"
-#~ msgstr "Μετακίνηση σε εξέλιξη"
-
-#~ msgid "Moving partition..."
-#~ msgstr "Μετακίνηση κατάτμησης σε εξέλιξη..."
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "Σφάλμα κατά το άνοιγμα του %s για εγγραφή: %s"
-
-#~ msgid "OK"
-#~ msgstr "Εντάξει"
-
-#~ msgid ""
-#~ "The following options can be set to customize your\n"
-#~ "system security. If you need an explanation, look at the help tooltip.\n"
-#~ msgstr ""
-#~ "Οι παρακάτω επιλογές ασφαλείας μπορούν να επιλεγούν\n"
-#~ "για την προσαρμογή της ασφάλειας. Για επεξηγήσεις δείτε την βοήθεια.\n"
-
-#~ msgid "The %s is not known by this version of Scannerdrake."
-#~ msgstr "Το %s δεν είναι γνωστό από αυτή την έκδοση του Scannerdrake."
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Τσέχικο (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Γερμανικό"
-
-#~ msgid "Dvorak"
-#~ msgstr "Dvorak"
-
-#~ msgid "Spanish"
-#~ msgstr "Ισπανικό"
-
-#~ msgid "Finnish"
-#~ msgstr "Φινλανδικό"
-
-#~ msgid "French"
-#~ msgstr "Γαλλικό"
-
-#~ msgid "Norwegian"
-#~ msgstr "Νορβηγικό"
-
-#~ msgid "Polish"
-#~ msgstr "Πολωνικό"
-
-#~ msgid "Russian"
-#~ msgstr "Ρωσικό"
-
-#~ msgid "Swedish"
-#~ msgstr "Σουηδικό"
-
-#~ msgid "Albanian"
-#~ msgstr "Αλβανικό"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Αρμενικό (παλιό)"
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Αρμενικό (γραφομηχανή)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Αρμενικό (φωνητικό)"
-
-#~ msgid "Arabic"
-#~ msgstr "Αραβικό"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Αζερμπαϊτζάν (Λατινικό)"
-
-#~ msgid "Belgian"
-#~ msgstr "Βελγικό"
-
-#~ msgid "Bengali"
-#~ msgstr "Βεγγαλικό"
-
-#~ msgid "Bulgarian (phonetic)"
-#~ msgstr "Βουλγαρικό (φωνητικό)"
-
-#~ msgid "Bulgarian (BDS)"
-#~ msgstr "Βουλγαρικό (BDS)"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Βραζιλιάνικο (ABNT-2)"
-
-#~ msgid "Bosnian"
-#~ msgstr "Βοσνίας"
-
-#~ msgid "Belarusian"
-#~ msgstr "Λευκορωσίας"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "Ελβετικό (Γερμανική διάταξη)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "Ελβετικό (Γαλλική διάταξη)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Τσέχικο (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Γερμανικό (χωρίς νεκρά πλήκτρα)"
-
-#~ msgid "Devanagari"
-#~ msgstr "Δεβαναγαρικό"
-
-#~ msgid "Danish"
-#~ msgstr "Δανικό"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Dvorak (ΗΠΑ)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Dvorak (Νορβηγικό)"
-
-#~ msgid "Dvorak (Swedish)"
-#~ msgstr "Dvorak (Σουηδικό)"
-
-#~ msgid "Estonian"
-#~ msgstr "Εσθονικό"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Γεωργία (\"Ρώσικη\" διάταξη)"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Γεωργία (\"Λατινική\" διάταξη)"
-
-#~ msgid "Greek"
-#~ msgstr "Ελληνικό"
-
-#~ msgid "Gujarati"
-#~ msgstr "Γκουτζαρατικό"
-
-#~ msgid "Gurmukhi"
-#~ msgstr "Γκουρμούκι"
-
-#~ msgid "Hungarian"
-#~ msgstr "Ουγγρικό"
-
-#~ msgid "Croatian"
-#~ msgstr "Κροατικό"
-
-#~ msgid "Israeli"
-#~ msgstr "Ισραήλ"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Ισραήλ (φωνητικό)"
-
-#~ msgid "Iranian"
-#~ msgstr "Ιρανικό"
-
-#~ msgid "Icelandic"
-#~ msgstr "Ισλανδικό"
-
-#~ msgid "Italian"
-#~ msgstr "Ιταλικό"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Ιαπωνικό 106 πλήκτρων"
-
-#~ msgid "Korean keyboard"
-#~ msgstr "Κορεάτικο Πληκτρολόγιο"
-
-#~ msgid "Latin American"
-#~ msgstr "Λατινικής Αμερικής"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Λιθουανικό AZERTY (παλιό)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Λιθουανικό AZERTY (νέο)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Λιθουανικό \"number row\" QWERTY"
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Λιθουανικό \"φωνητικό\" QWERTY"
-
-#~ msgid "Latvian"
-#~ msgstr "Λετονικό"
-
-#~ msgid "Malayalam"
-#~ msgstr "Μαλαγιαλαμικό"
-
-#~ msgid "Macedonian"
-#~ msgstr "Μακεδονικό Π.Γ Δ."
-
-#~ msgid "Mongolian (cyrillic)"
-#~ msgstr "Μογγολικό (Κυριλλική)"
-
-#~ msgid "Dutch"
-#~ msgstr "Ολλανδικό"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Πολωνικό (διάταξη qwerty)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Πολωνικό (διάταξη qwertz)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Πορτογαλικό"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Καναδικό (Κεμπέκ)"
-
-#~ msgid "Romanian (qwertz)"
-#~ msgstr "Ρουμανικό (qwertz)"
-
-#~ msgid "Romanian (qwerty)"
-#~ msgstr "Ρουμανικό (qwerty)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Ρωσικό (φωνητικό)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Σλοβενίας"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Σλοβακίας (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Σλοβακίας (QWERTY)"
-
-#~ msgid "Serbian (cyrillic)"
-#~ msgstr "Σέρβικο (κυριλλικό)"
-
-#~ msgid "Tamil (ISCII-layout)"
-#~ msgstr "Ταμιλικό (διάταξη ISCII)"
-
-#~ msgid "Tamil (Typewriter-layout)"
-#~ msgstr "Ταμιλικό (διάταξη γραφομηχανή)"
-
-#~ msgid "Thai keyboard"
-#~ msgstr "Ταϊλανδέζικο"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Τουρκικό (παραδοσιακό \"F\" μοντέλο)"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Τουρκικό (μοντέρνο \"Q\" μοντέλο)"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Ουκρανικό"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Βιετνάμ \"numeric row\" QWERTY"
-
-#~ msgid "Yugoslavian (latin)"
-#~ msgstr "Γιουγκοσλαβικό (λατινικό)"
-
-#~ msgid "Enable multiple profiles"
-#~ msgstr "Ενεργοποίηση πολλαπλών προφίλ"
-
-#~ msgid ""
-#~ "You now have the opportunity to download updated packages. These "
-#~ "packages\n"
-#~ "have been updated after the distribution was released. They may\n"
-#~ "contain security or bug fixes.\n"
-#~ "\n"
-#~ "To download these packages, you will need to have a working Internet \n"
-#~ "connection.\n"
-#~ "\n"
-#~ "Do you want to install the updates ?"
-#~ msgstr ""
-#~ "Τώρα έχετε τη δυνατότητα να εγκαταστήσετε πακέτα αναβάθμισης. Αυτά τα\n"
-#~ "πακέτα έχουν αναβαθμιστεί μετά την έκδοση της διανομής. Μπορεί να "
-#~ "περιέχουν\n"
-#~ "διορθώσεις σφαλμάτων ή αναβαθμίσεις ασφάλειας.\n"
-#~ "\n"
-#~ "Για να κάνετε λήψη αυτών των πακέτων πρέπει να έχετε μια σύνδεση στο "
-#~ "Διαδίκτυο\n"
-#~ "που να λειτουργεί.\n"
-#~ "\n"
-#~ "Θέλετε να εγκαταστήσετε τις αναβαθμίσεις ;"
-
-#~ msgid "Installing bootloader"
-#~ msgstr "Πρόγραμμα εκκίνησης"
-
-#~ msgid ""
-#~ "You may now provide options to module %s.\n"
-#~ "Options are in format ``name=value name2=value2...''.\n"
-#~ "For instance, ``io=0x300 irq=7''"
-#~ msgstr ""
-#~ "Μπορείτε τώρα να δώσετε τις παραμέτρους για το άρθρωμα %s.\n"
-#~ "Οι παράμετροι έχουν την μορφή ``όνομα=τιμή όνομα2=τιμή2 ...''.\n"
-#~ "Για παράδειγμα, ``io=0x300 irq=7''"
-
-#~ msgid "Configuring printer..."
-#~ msgstr "Ρυθμίζεται ο εκτυπωτής ..."
-
-#~ msgid "Configuring applications..."
-#~ msgstr "Ρύθμιση εφαρμογών..."
-
-#~ msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Προσθήκη αυτού του εκτυπωτή στο Star Office/OpenOffice.org/GIMP"
-
-#~ msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Αφαίρεση αυτού του εκτυπωτή από το Star Office/OpenOffice.org/GIMP"
-
-#~ msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-#~ msgstr "Γίνεται προσθήκη του εκτυπωτή στο Star Office/OpenOffice.org/GIMP"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/"
-#~ "GIMP."
-#~ msgstr ""
-#~ "Ο εκτυπωτής \"%s\" προστέθηκε με επιτυχία στο Star Office/OpenOffice.org/"
-#~ "GIMP"
-
-#~ msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Απέτυχε η προσθήκη του εκτυπωτή \"%s\" στο Star Office/OpenOffice.org/GIMP"
-
-#~ msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-#~ msgstr ""
-#~ "Γίνεται αφαίρεση του εκτυπωτή από το Star Office/OpenOffice.org/GIMP"
-
-#~ msgid ""
-#~ "The printer \"%s\" was successfully removed from Star Office/OpenOffice."
-#~ "org/GIMP."
-#~ msgstr ""
-#~ "Ο εκτυπωτής \"%s\" αφαιρέθηκε με επιτυχία από το Star Office/OpenOffice."
-#~ "org/GIMP"
-
-#~ msgid ""
-#~ "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-#~ msgstr ""
-#~ "Απέτυχε η αφαίρεση του εκτυπωτή \"%s\" από το Star Office/OpenOffice.org/"
-#~ "GIMP"
-
-#~ msgid "Installation of %s failed. The following error occurred:"
-#~ msgstr "Η εγκατάσταση του %s απέτυχε. Προκλήθηκε το ακόλουθο σφάλμα:"
-
-#~ msgid "Set of tools to read and send mail and news and to browse the Web"
-#~ msgstr ""
-#~ "Σετ εργαλείων για την αποστολή και λήψη αλληλογραφίας, ειδήσεων  και "
-#~ "περιήγηση στο Διαδίκτυο"
-
-#~ msgid "Use auto detection"
-#~ msgstr "Χρήση αυτόματης ανίχνευσης"
-
-#~ msgid "/dev/hda"
-#~ msgstr "/dev/hda"
-
-#~ msgid "/dev/hdb"
-#~ msgstr "/dev/hdb"
-
-#~ msgid "/dev/fd0"
-#~ msgstr "/dev/fd0"
-
-#~ msgid ""
-#~ "No ethernet network adapter has been detected on your system.\n"
-#~ "I cannot set up this connection type."
-#~ msgstr ""
-#~ "Δεν βρέθηκε προσαρμογέας δικτύου Ethernet στο σύστημά σας.\n"
-#~ "Δεν μπορώ να ρυθμίσω αυτού του τύπου τη σύνδεση."
-
-#~ msgid ""
-#~ "Please choose which network adapter you want to use to connect to "
-#~ "Internet."
-#~ msgstr ""
-#~ "Παρακαλώ επιλέξτε ποια συσκευή δικτύου θέλετε να χρησιμοποιήσετε για την "
-#~ "σύνδεση στο Διαδίκτυο"
-
-#~ msgid "chunk size"
-#~ msgstr "μέγεθος chunk"
-
-#~ msgid "mkraid failed (maybe raidtools are missing?)"
-#~ msgstr "αποτυχία mkraid (μήπως απουσιάζουν τα raidtools;)"
-
-#~ msgid "mkraid failed"
-#~ msgstr "αποτυχία mkraid"
-
-#~ msgid ""
-#~ "Connection failed.\n"
-#~ "Verify your configuration in the Mandrake Control Center."
-#~ msgstr ""
-#~ "Η σύνδεση απέτυχε.\n"
-#~ "Επαληθεύστε τις ρυθμίσεις σας στο Κέντρο Ελέγχου Mandrake."
-
-#~ msgid "The package %s is needed. Install it?"
-#~ msgstr "Το πακέτο %s είναι απαραίτητο. Να εγκατασταθεί;"
-
-#~ msgid "SILO Installation"
-#~ msgstr "Εγκατάσταση SILO"
-
-#~ msgid "First sector of boot partition"
-#~ msgstr "Πρώτος τομέας της κατάτμησης εκκίνησης"
-
-#~ msgid "Bootloader installation"
-#~ msgstr "Πρόγραμμα εκκίνησης"
-
-#~ msgid "SILO"
-#~ msgstr "SILO"
-
-#~ msgid "Alcatel speedtouch usb"
-#~ msgstr "Alcatel speedtouch usb"
-
-#~ msgid "Sagem (using pppoa) usb"
-#~ msgstr "Sagem (με χρήση του pppoa) usb"
-
-#~ msgid "Harddrake2 version %s"
-#~ msgstr "Έκδοση Harddrake2 %s"
-
-#~ msgid "transmitted"
-#~ msgstr "απεσταλμένα"
-
-#~ msgid "received"
-#~ msgstr "ληφθέντα"
-
-#~ msgid ""
-#~ "You can export using NFS or SMB. Please select which you'd like to use."
-#~ msgstr ""
-#~ "Μπορείτε να γίνει εξαγωγή με την χρήση NFS ή SMB. Παρακαλώ επιλέξτε ποίο "
-#~ "θέλετε."
-
-#~ msgid ""
-#~ "You can export using NFS or Samba. Please select which you'd like to use."
-#~ msgstr ""
-#~ "Μπορείτε να γίνει εξαγωγή με την χρήση NFS ή Samba. Παρακαλώ επιλέξτε "
-#~ "ποίο θέλετε."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Η κάρτα γραφικών σας υποστηρίζει επιτάχυνση τρισδιάστατων γραφικών μόνο "
-#~ "με τα Xorg %s.\n"
-#~ "Η κάρτα σας υποστηρίζεται από τα Xorg %s τα οποία μπορεί να δίνουν "
-#~ "καλύτερη υποστήριξη για διδιάστατα γραφικά."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s,\n"
-#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Η κάρτα γραφικών σας υποστηρίζει επιτάχυνση τρισδιάστατων γραφικών μόνο "
-#~ "με τα Xorg %s.\n"
-#~ "ΠΡΟΣΟΧΗ: ΠΕΙΡΑΜΑΤΙΚΗ ΥΠΟΣΤΗΡΙΞΗ - ΜΠΟΡΕΙ ΝΑ ΠΑΓΩΣΕΙ ΤΟΝ ΥΠΟΛΟΓΙΣΤΗ ΣΑΣ!\n"
-#~ "Η κάρτα σας υποστηρίζεται από τα Xorg %s τα οποία μπορεί να δίνουν "
-#~ "καλύτερη υποστήριξη για διδιάστατα γραφικά"
-
-#~ msgid "Xpmac (installation display driver)"
-#~ msgstr "Xpmac (οδηγός προβολής εγκατάστασης)"
-
-#~ msgid "4 billion colors (32 bits)"
-#~ msgstr "4 δισεκατομμύρια χρώματα (32 bits)"
-
-#~ msgid "XFree86 server: %s\n"
-#~ msgstr "Εξυπηρετητής XFree86: %s\n"
-
-#~ msgid "Here is the full list of keyboards available"
-#~ msgstr "Αυτή είναι η πλήρης λίστα των διαθέσιμων πληκτρολογίων"
-
-#~ msgid "Please insert the Boot floppy used in drive %s"
-#~ msgstr "Παρακαλώ εισάγετε τη δισκέτα Εκκίνησης στον οδηγό %s"
-
-#~ msgid "XawTV is not installed!"
-#~ msgstr "Το XawTV εγκαταστάθηκε!"
-
-#~ msgid "Provider dns 1 (optional)"
-#~ msgstr "dns 1 Παροχέα (προαιρετικό)"
-
-#~ msgid "Provider dns 2 (optional)"
-#~ msgstr "dns 2 Παροχέα (προαιρετικό)"
-
-#~ msgid "DHCP Client"
-#~ msgstr "Πελάτης DHCP"
-
-#~ msgid ""
-#~ "Change\n"
-#~ "Restore Path"
-#~ msgstr ""
-#~ "Αλλαγή\n"
-#~ "Θέση Επαναφοράς"
-
-#~ msgid "European protocol"
-#~ msgstr "Ευρωπαϊκό πρωτόκολλο"
-
-#~ msgid "Found \"%s\" interface do you want to use it ?"
-#~ msgstr "Βρέθηκε μια διεπαφή \"%s\" θέλετε να τη χρησιμοποιήσετε ;"
-
-#~ msgid "What kind is your ISDN connection?"
-#~ msgstr "Τι είδους είναι η ISDN σύνδεσή σας;"
-
-#~ msgid ""
-#~ "I have detected an ISDN PCI card, but I do not know its type. Please "
-#~ "select a PCI card on the next screen."
-#~ msgstr ""
-#~ "Εντόπισα μια ISDN κάρτα, αλλά δεν ξέρω τον τύπο της. Παρακαλώ επιλέξτε "
-#~ "μια κάρτα PCI από την παρακάτω οθόνη."
-
-#~ msgid "No ISDN PCI card found. Please select one on the next screen."
-#~ msgstr ""
-#~ "Δεν βρέθηκε κάρτα ISDN. Παρακαλώ επιλέξτε μια από την παρακάτω οθόνη."
-
-#~ msgid "Under Devel ... please wait."
-#~ msgstr "Υπό Ανάπτυξη ... παρακαλώ περιμένετε."
-
-#~ msgid "Windows (FAT32)"
-#~ msgstr "Windows (FAT32)"
-
-#~ msgid "Scientific Workstation"
-#~ msgstr "Σταθμός Εργασίας Επιστημονικών εφαρμογών"
-
-#~ msgid "Scientific applications such as gnuplot"
-#~ msgstr "Επιστημονικές εφαρμογές όπως το gnuplot"
-
-#~ msgid "Please select media for backup..."
-#~ msgstr "Παρακαλώ επιλέξτε το μέσο για τα αντίγραφα ασφαλείας..."
-
-#~ msgid "Configuration of a remote printer"
-#~ msgstr "Ρύθμιση απομακρυσμένου εκτυπωτή"
-
-#~ msgid "Gnome Workstation"
-#~ msgstr "Σταθμός Εργασίας Gnome"
-
-#~ msgid "Running \"%s\" ..."
-#~ msgstr "Εκτέλεση του \"%s\"..."
-
-#~ msgid "utopia 25"
-#~ msgstr "utopia 25"
-
-#~ msgid "On Hard Drive"
-#~ msgstr "στον Σκληρό Δίσκο"
-
-#~ msgid "Messages"
-#~ msgstr "Μηνύματα"
-
-#~ msgid "Syslog"
-#~ msgstr "Syslog"
-
-#~ msgid "Compact"
-#~ msgstr "Συμπαγής"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
deleted file mode 100644
index 968703ae6..000000000
--- a/perl-install/share/po/eo.po
+++ /dev/null
@@ -1,24419 +0,0 @@
-# Esperanto drakbootdisk
-# Copyright (C) 2000, 2001 Mandriva
-# D. Dale Gulledge <dsplat@rochester.rr.com>, 2000.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2005-05-22 20:07+0200\n"
-"PO-Revision-Date: 2003-03-12 18:31-0400\n"
-"Last-Translator: Vilhelmo Lutermano <vlutermano@free.fr>\n"
-"Language-Team: esperanto <eo@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 0.9.6\n"
-
-#: ../move/move.pm:292
-#, fuzzy, c-format
-msgid "Which USB key do you want to format?"
-msgstr "Kiun specon de enskribo vi deziras aldoni"
-
-#: ../move/move.pm:296
-#, c-format
-msgid ""
-"You are about to format a USB device \"%s\". This will delete all data on "
-"it.\n"
-"Make sure that the selected device is the USB key you want to format. \n"
-"We advise you to unplug all other USB storage devices while doing this "
-"operation."
-msgstr ""
-
-#: ../move/move.pm:448 ../move/move.pm:460
-#, c-format
-msgid "Key is not writable"
-msgstr ""
-
-#: ../move/move.pm:450
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
-msgstr ""
-
-#: ../move/move.pm:452
-#, fuzzy, c-format
-msgid "Retry"
-msgstr "Restaŭru de dosiero"
-
-#: ../move/move.pm:453 ../move/move.pm:497
-#, c-format
-msgid "Continue without USB key"
-msgstr ""
-
-#: ../move/move.pm:462
-#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can not safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandriva Move again."
-msgstr ""
-
-#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1320
-#, c-format
-msgid "Reboot"
-msgstr "Restarto"
-
-#: ../move/move.pm:473
-#, c-format
-msgid ""
-"Your USB key does not have any valid Windows (FAT) partitions.\n"
-"We need one to continue (beside, it's more standard so that you\n"
-"will be able to move and access your files from machines\n"
-"running Windows). Please plug in an USB key containing a\n"
-"Windows partition instead.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:483
-#, c-format
-msgid ""
-"We did not detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandriva Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandriva Move as a normal live Mandriva\n"
-"Operating System."
-msgstr ""
-
-#: ../move/move.pm:494
-#, c-format
-msgid "Need a key to save your data"
-msgstr ""
-
-#: ../move/move.pm:496
-#, c-format
-msgid "Detect USB key again"
-msgstr ""
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Setting up USB key"
-msgstr "Starigas ISA PNP aparatojn: "
-
-#: ../move/move.pm:517
-#, fuzzy, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "Elektas sekurnivelon"
-
-#: ../move/move.pm:546
-#, c-format
-msgid "Enter your user information, password will be used for screensaver"
-msgstr ""
-
-#: ../move/move.pm:556
-#, fuzzy, c-format
-msgid "Auto configuration"
-msgstr "Interreta Konfigurado"
-
-#: ../move/move.pm:556
-#, fuzzy, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "Elektas sekurnivelon"
-
-#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:116 diskdrake/interactive.pm:227
-#: diskdrake/interactive.pm:240 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:419 diskdrake/interactive.pm:556
-#: diskdrake/interactive.pm:561 diskdrake/smbnfs_gtk.pm:42 fsedit.pm:182
-#: install_any.pm:1698 install_any.pm:1721 install_steps.pm:82
-#: install_steps_interactive.pm:38 interactive/http.pm:117
-#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:41
-#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
-#: network/netconnect.pm:1013 network/netconnect.pm:1121
-#: network/netconnect.pm:1125 network/netconnect.pm:1129
-#: network/netconnect.pm:1134 network/netconnect.pm:1266
-#: network/netconnect.pm:1270 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 network/netconnect.pm:1386
-#: network/netconnect.pm:1391 network/netconnect.pm:1411
-#: network/netconnect.pm:1622 printer/printerdrake.pm:244
-#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
-#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
-#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
-#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
-#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
-#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
-#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
-#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
-#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
-#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
-#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
-#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
-#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
-#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
-#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
-#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
-#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4309
-#: printer/printerdrake.pm:4333 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476 printer/printerdrake.pm:4596
-#: standalone/drakTermServ:393 standalone/drakTermServ:467
-#: standalone/drakTermServ:476 standalone/drakTermServ:771
-#: standalone/drakTermServ:778 standalone/drakTermServ:801
-#: standalone/drakTermServ:847 standalone/drakTermServ:1023
-#: standalone/drakTermServ:1503 standalone/drakTermServ:1519
-#: standalone/drakTermServ:1524 standalone/drakTermServ:1532
-#: standalone/drakTermServ:1544 standalone/drakTermServ:1565
-#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
-#: standalone/drakbackup:1090 standalone/drakbackup:1122
-#: standalone/drakbackup:1643 standalone/drakbackup:1799
-#: standalone/drakbackup:2413 standalone/drakbackup:4102
-#: standalone/drakbackup:4322 standalone/drakclock:124
-#: standalone/drakconnect:683 standalone/drakconnect:687
-#: standalone/drakconnect:692 standalone/drakconnect:707
-#: standalone/drakfloppy:297 standalone/drakfloppy:300
-#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
-#: standalone/drakfont:261 standalone/drakroam:41 standalone/draksplash:26
-#: standalone/drakxtv:107 standalone/finish-install:39 standalone/logdrake:169
-#: standalone/logdrake:438 standalone/logdrake:443 standalone/scannerdrake:59
-#: standalone/scannerdrake:202 standalone/scannerdrake:261
-#: standalone/scannerdrake:715 standalone/scannerdrake:726
-#: standalone/scannerdrake:865 standalone/scannerdrake:876
-#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
-#: wizards2.pm:95 wizards2.pm:99 wizards2.pm:121
-#, c-format
-msgid "Error"
-msgstr "Eraro"
-
-#: ../move/move.pm:605 install_steps.pm:83
-#, c-format
-msgid ""
-"An error occurred, but I do not know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Eraro okazis, sed mi ne scias kiel trakti ĝin bone.\n"
-"Daŭri je via propra risko."
-
-#: ../move/move.pm:660 install_steps_interactive.pm:38
-#, c-format
-msgid "An error occurred"
-msgstr "Eraro okazis"
-
-#: ../move/move.pm:666
-#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandriva Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
-
-#: ../move/move.pm:681
-#, fuzzy, c-format
-msgid "Remove system config files"
-msgstr "Ĉu forigu la retrokonektan dosieron?"
-
-#: ../move/move.pm:682
-#, c-format
-msgid "Simply reboot"
-msgstr ""
-
-#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
-#, c-format
-msgid "You can only run with no CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:71
-#, fuzzy, c-format
-msgid "Kill those programs"
-msgstr "aliro al X-programoj"
-
-#: ../move/tree/mdk_totem:72
-#, c-format
-msgid "No CDROM support"
-msgstr ""
-
-#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:95
-#: diskdrake/interactive.pm:1039 diskdrake/interactive.pm:1049
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Read carefully!"
-msgstr "Legu zorge"
-
-#: ../move/tree/mdk_totem:77
-#, c-format
-msgid ""
-"You can not use another CDROM when the following programs are running: \n"
-"%s"
-msgstr ""
-
-#: ../move/tree/mdk_totem:101
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
-
-#: Xconfig/card.pm:13
-#, c-format
-msgid "256 kB"
-msgstr "256 KB"
-
-#: Xconfig/card.pm:14
-#, c-format
-msgid "512 kB"
-msgstr "512 KB"
-
-#: Xconfig/card.pm:15
-#, c-format
-msgid "1 MB"
-msgstr "1 MB"
-
-#: Xconfig/card.pm:16
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: Xconfig/card.pm:17
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
-
-#: Xconfig/card.pm:18
-#, c-format
-msgid "8 MB"
-msgstr "8 MB"
-
-#: Xconfig/card.pm:19
-#, c-format
-msgid "16 MB"
-msgstr "16 MB"
-
-#: Xconfig/card.pm:20
-#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: Xconfig/card.pm:21
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB aŭ pli"
-
-#: Xconfig/card.pm:159
-#, c-format
-msgid "X server"
-msgstr "X servilo"
-
-#: Xconfig/card.pm:160
-#, c-format
-msgid "Choose an X server"
-msgstr "Elektu X-servilon"
-
-#: Xconfig/card.pm:192
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Plur-ekrana konfiguraĵo"
-
-#: Xconfig/card.pm:193
-#, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"Via sistemo subtenas multkapo-konfiguradon.\n"
-"Kion vi deziras fari?"
-
-#: Xconfig/card.pm:262
-#, fuzzy, c-format
-msgid "Can not install Xorg package: %s"
-msgstr "Instalanta pakaĵo %s"
-
-#: Xconfig/card.pm:272
-#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Elektu memorkapaciton de via grafika karto"
-
-#: Xconfig/card.pm:349
-#, c-format
-msgid "Xorg configuration"
-msgstr "Xorg Konfigurado"
-
-#: Xconfig/card.pm:351
-#, c-format
-msgid "Which configuration of Xorg do you want to have?"
-msgstr "Kiun konfiguron de Xorg vi deziras havi?"
-
-#: Xconfig/card.pm:384
-#, c-format
-msgid "Configure all heads independently"
-msgstr "Konfiguru ĉiujn kapojn sendepende"
-
-#: Xconfig/card.pm:385
-#, c-format
-msgid "Use Xinerama extension"
-msgstr "Uzu Xinerama extension"
-
-#: Xconfig/card.pm:390
-#, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfiguru nur karton \"%s\"%s"
-
-#: Xconfig/card.pm:402 Xconfig/various.pm:23
-#, c-format
-msgid "Xorg %s"
-msgstr "Xorg %s"
-
-#: Xconfig/card.pm:409 Xconfig/various.pm:22
-#, c-format
-msgid "Xorg %s with 3D hardware acceleration"
-msgstr "Xorg %s kun 3D aparata akcelado"
-
-#: Xconfig/card.pm:411
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with Xorg %s."
-msgstr "Vi povas havi 3D aparatan akceladan subtenon kun Xorg %s."
-
-#: Xconfig/card.pm:417
-#, c-format
-msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "Xorg %s kun EKSPERIMENTA 3D aparata akcelado"
-
-#: Xconfig/card.pm:419
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with Xorg %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Via karto povas havi 3D aparatan akceladon, sed nur kun Xorg %s.\n"
-"NOTU KE ĈI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN KOMPUTILON."
-
-#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:921
-#, c-format
-msgid "Custom"
-msgstr "Akomodata"
-
-#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
-#: install_steps_interactive.pm:86 printer/printerdrake.pm:744
-#: printer/printerdrake.pm:4405 printer/printerdrake.pm:4857
-#: standalone/draksplash:83 standalone/logdrake:174 standalone/net_applet:229
-#: standalone/scannerdrake:477
-#, c-format
-msgid "Quit"
-msgstr "Ĉesu"
-
-#: Xconfig/main.pm:117
-#, c-format
-msgid "Graphic Card"
-msgstr "Grafik-karto"
-
-#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
-#, c-format
-msgid "Monitor"
-msgstr "Ekrano"
-
-#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:288
-#, c-format
-msgid "Resolution"
-msgstr "Distingivo"
-
-#: Xconfig/main.pm:128
-#, c-format
-msgid "Test"
-msgstr "Testo"
-
-#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:445
-#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:80
-#: standalone/drakfont:491 standalone/drakfont:553
-#, c-format
-msgid "Options"
-msgstr "Opcioj"
-
-#: Xconfig/main.pm:168
-#, c-format
-msgid "Your Xorg configuration file is broken, we will ignore it."
-msgstr ""
-
-#: Xconfig/main.pm:186
-#, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
-msgstr ""
-"Ĉu vi deziras teni la ŝanĝojn?\n"
-"Nuna konfiguro estas:\n"
-"\n"
-"%s"
-
-#: Xconfig/monitor.pm:111
-#, fuzzy, c-format
-msgid "Choose a monitor for head #%d"
-msgstr "Elektu ekranon"
-
-#: Xconfig/monitor.pm:111
-#, c-format
-msgid "Choose a monitor"
-msgstr "Elektu ekranon"
-
-#: Xconfig/monitor.pm:117
-#, c-format
-msgid "Plug'n Play"
-msgstr ""
-
-#: Xconfig/monitor.pm:118 mouse.pm:49
-#, c-format
-msgid "Generic"
-msgstr "Genera"
-
-#: Xconfig/monitor.pm:119 standalone/drakconnect:602 standalone/harddrake2:53
-#: standalone/harddrake2:87
-#, c-format
-msgid "Vendor"
-msgstr "Vendinto"
-
-#: Xconfig/monitor.pm:129
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
-
-#: Xconfig/monitor.pm:137
-#, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"La du gravegaj parametroj estas la vertikala refreŝigrapido (vertical\n"
-"refresh rate) kiu estas la rapido por refreŝigi la tutan ekranon, kaj\n"
-"plej grave la horizontala sinkronrapido (horizontal sync rate), kiu estas\n"
-"la rapido por montri skanliniojn.\n"
-"\n"
-"Ĝi estas TRE GRAVA ke vi ne elektas specon de ekrano kiu havas\n"
-"sinkronamplekson kiu estas preter la kapabloj de via ekrano: vi eble\n"
-"difektus vian ekranon.  Se vi dubas, elektu zorgeman opcion."
-
-#: Xconfig/monitor.pm:144
-#, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horizontala sinkronrapido (horizontal sync rate)"
-
-#: Xconfig/monitor.pm:145
-#, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikala refreŝigrapido (vertical refresh rate)"
-
-#: Xconfig/resolution_and_depth.pm:12
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 koloroj (8 bitoj)"
-
-#: Xconfig/resolution_and_depth.pm:13
-#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 mil koloroj (15 bitoj)"
-
-#: Xconfig/resolution_and_depth.pm:14
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 mil koloroj (16 bitoj)"
-
-#: Xconfig/resolution_and_depth.pm:15
-#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milionoj koloroj (24 bitoj)"
-
-#: Xconfig/resolution_and_depth.pm:129
-#, c-format
-msgid "Resolutions"
-msgstr "Distingivoj"
-
-#: Xconfig/resolution_and_depth.pm:310 diskdrake/hd_gtk.pm:339
-#: install_steps_gtk.pm:283 mouse.pm:168 services.pm:162
-#: standalone/drakbackup:1581 standalone/drakperm:251
-#, c-format
-msgid "Other"
-msgstr "Alia"
-
-#: Xconfig/resolution_and_depth.pm:359
-#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Elektu distingivon kaj kolorprofundon"
-
-#: Xconfig/resolution_and_depth.pm:360
-#, c-format
-msgid "Graphics card: %s"
-msgstr "Grafika karto: %s"
-
-#: Xconfig/resolution_and_depth.pm:374 interactive.pm:433
-#: interactive/gtk.pm:767 interactive/http.pm:103 interactive/http.pm:156
-#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
-#: standalone/drakTermServ:200 standalone/drakTermServ:518
-#: standalone/drakbackup:1345 standalone/drakbackup:3959
-#: standalone/drakbackup:4019 standalone/drakbackup:4063
-#: standalone/drakconnect:166 standalone/drakconnect:885
-#: standalone/drakconnect:972 standalone/drakconnect:1071
-#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
-#: standalone/draksplash:145 standalone/drakups:212 standalone/net_monitor:345
-#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
-#, c-format
-msgid "Ok"
-msgstr "Jeso"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/smbnfs_gtk.pm:81 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:479 install_steps_interactive.pm:422
-#: install_steps_interactive.pm:827 interactive.pm:434 interactive/gtk.pm:771
-#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
-#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
-#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
-#: standalone/drakautoinst:217 standalone/drakbackup:1345
-#: standalone/drakbackup:3885 standalone/drakbackup:3889
-#: standalone/drakbackup:3947 standalone/drakconnect:165
-#: standalone/drakconnect:970 standalone/drakconnect:1070
-#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
-#: standalone/draksplash:145 standalone/drakups:219 standalone/logdrake:174
-#: standalone/net_monitor:344 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
-#: ugtk2.pm:908
-#, c-format
-msgid "Cancel"
-msgstr "Nuligu"
-
-#: Xconfig/resolution_and_depth.pm:374 diskdrake/hd_gtk.pm:153
-#: install_steps_gtk.pm:227 install_steps_gtk.pm:628 interactive.pm:528
-#: interactive/gtk.pm:637 interactive/gtk.pm:639 standalone/drakTermServ:285
-#: standalone/drakbackup:3881 standalone/drakbug:104
-#: standalone/drakconnect:161 standalone/drakconnect:246
-#: standalone/drakfont:509 standalone/drakperm:134 standalone/draksec:336
-#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
-#: ugtk2.pm:1040 ugtk2.pm:1041
-#, c-format
-msgid "Help"
-msgstr "Helpo"
-
-#: Xconfig/test.pm:30
-#, c-format
-msgid "Test of the configuration"
-msgstr "Provu konfiguraĵon"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Ĉu vi deziras provi la konfiguraĵon?"
-
-#: Xconfig/test.pm:31
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Averto: provado de ĉi tiu grafika-karto eble svenigos vian komputilon"
-
-#: Xconfig/test.pm:69
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Eraro okazis:\n"
-"%s\n"
-"Provu ŝanĝi iujn parametrojn"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Leaving in %d seconds"
-msgstr "Eliras post %d sekundoj"
-
-#: Xconfig/test.pm:129
-#, c-format
-msgid "Is this the correct setting?"
-msgstr "Ĉu tiu ĉi konfigurado ĝustas?"
-
-#: Xconfig/various.pm:29
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavara aranĝo: %s\n"
-
-#: Xconfig/various.pm:30
-#, c-format
-msgid "Mouse type: %s\n"
-msgstr "Speco de muso: %s\n"
-
-#: Xconfig/various.pm:31
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Musaparato: %s\n"
-
-#: Xconfig/various.pm:33
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Ekrano: %s\n"
-
-#: Xconfig/various.pm:34
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Ekrana horizontala sinkronrapido (horizontal sync rate): %s\n"
-
-#: Xconfig/various.pm:35
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ekrana vertikala refreŝigrapido (vertical refresh rate): %s\n"
-
-#: Xconfig/various.pm:37
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Grafika karto: %s\n"
-
-#: Xconfig/various.pm:38
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Graifka memoro: %s KB\n"
-
-#: Xconfig/various.pm:40
-#, c-format
-msgid "Color depth: %s\n"
-msgstr "Kolorprofuneco: %s\n"
-
-#: Xconfig/various.pm:41
-#, c-format
-msgid "Resolution: %s\n"
-msgstr "Distingivo: %s\n"
-
-#: Xconfig/various.pm:43
-#, c-format
-msgid "Xorg driver: %s\n"
-msgstr "Xorg pelilo: %s\n"
-
-#: Xconfig/various.pm:72
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X Fenestro ĉe komenco"
-
-#: Xconfig/various.pm:74
-#, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(Xorg) upon booting.\n"
-"Would you like Xorg to start when you reboot?"
-msgstr ""
-"Mi povas konfiguri vian komputilon tiel ke ĝi aŭtomate lanĉos X kiam ĝi\n"
-"ekfunkcias.  Ĉu vi deziras ke X aŭtomate lanĉos?"
-
-#: Xconfig/various.pm:87
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-"Via grafika karto ŝajnas havi TV-OUT-konektilon.\n"
-"Ĝi konfigureblas por funkcii uzante frame-buffer.\n"
-"\n"
-"Por tio vi devas konekti vian grafikan karton al via televidilo antaŭ ol "
-"startigi vian komputilon.\n"
-"Poste elektu la \"TVout\"-eniron en la startigilo\n"
-"\n"
-"Ĉu vi havas tiun konektilon?"
-
-#: Xconfig/various.pm:99
-#, c-format
-msgid "What norm is your TV using?"
-msgstr "Kiun normon uzas via TV?"
-
-#: Xconfig/xfree.pm:630
-#, c-format
-msgid ""
-"_:weird aspect ratio\n"
-"other"
-msgstr ""
-
-#: any.pm:143 harddrake/sound.pm:191 interactive.pm:471 pkgs.pm:481
-#: standalone/drakconnect:168 standalone/drakconnect:646 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:244
-#: standalone/service_harddrake:203
-#, c-format
-msgid "Please wait"
-msgstr "Bonvole atendu"
-
-#: any.pm:143
-#, fuzzy, c-format
-msgid "Bootloader installation in progress"
-msgstr "Startŝargila instalado"
-
-#: any.pm:154
-#, c-format
-msgid ""
-"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
-"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
-"error.\n"
-"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
-"\n"
-"Assign a new Volume ID?"
-msgstr ""
-
-#: any.pm:165
-#, c-format
-msgid "Installation of bootloader failed. The following error occurred:"
-msgstr "Instalado de startŝargilo malsukcesis.  La sekvanta eraro okazis:"
-
-#: any.pm:171
-#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you do not see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-
-#: any.pm:209
-#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
-msgstr ""
-"Vi decidis instali la startilon en subdiskon.\n"
-"Tio implicas ke vi jam havas startilon sur la fiskdisko kiun vi startigas "
-"(ekz-e: System Commander).\n"
-"\n"
-"En kiu drajvo vi startigas?"
-
-#: any.pm:232 help.pm:739
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Unu sektoro de drajvo (ĈefStartRikordo)"
-
-#: any.pm:233
-#, c-format
-msgid "First sector of the root partition"
-msgstr "Unua sektoro de radika subdisko"
-
-#: any.pm:235
-#, c-format
-msgid "On Floppy"
-msgstr "Sur disketo"
-
-#: any.pm:237 help.pm:739 printer/printerdrake.pm:4061
-#, c-format
-msgid "Skip"
-msgstr "Ellasu"
-
-#: any.pm:241
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub Instalado"
-
-#: any.pm:242
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Kie vi deziras instali la startŝargilon?"
-
-#: any.pm:268 standalone/drakboot:261
-#, fuzzy, c-format
-msgid "Boot Style Configuration"
-msgstr "Post-instala konfigurado"
-
-#: any.pm:270 any.pm:302
-#, c-format
-msgid "Bootloader main options"
-msgstr "Startŝargilo ĉefaj opcioj"
-
-#: any.pm:274
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Donu kvanton de memoro en MB"
-
-#: any.pm:276
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Opcio ``Limigu komandliniajn opciojn'' ne estas utila sen pasvorto"
-
-#: any.pm:277 any.pm:610 authentication.pm:182
-#, c-format
-msgid "The passwords do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: any.pm:277 any.pm:610 authentication.pm:182 diskdrake/interactive.pm:1292
-#, c-format
-msgid "Please try again"
-msgstr "Bonvole provu denove"
-
-#: any.pm:282 any.pm:305
-#, c-format
-msgid "Bootloader to use"
-msgstr "Startŝargilo por uzi"
-
-#: any.pm:284 any.pm:307
-#, c-format
-msgid "Boot device"
-msgstr "Starta aparato"
-
-#: any.pm:286
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Prokrastoperiodo antaŭ starti defaŭltan sistemon"
-
-#: any.pm:287
-#, c-format
-msgid "Enable ACPI"
-msgstr "Ebligu ACPI"
-
-#: any.pm:289
-#, fuzzy, c-format
-msgid "Force no APIC"
-msgstr "Devigu No APIC"
-
-#: any.pm:291
-#, fuzzy, c-format
-msgid "Force No Local APIC"
-msgstr "Devigu No APIC"
-
-#: any.pm:293 any.pm:637 authentication.pm:187 diskdrake/smbnfs_gtk.pm:180
-#: network/netconnect.pm:688 printer/printerdrake.pm:1663
-#: printer/printerdrake.pm:1784 standalone/drakbackup:1625
-#: standalone/drakbackup:3488 standalone/drakups:299
-#, c-format
-msgid "Password"
-msgstr "Pasvorto"
-
-#: any.pm:294 any.pm:638 authentication.pm:188
-#, c-format
-msgid "Password (again)"
-msgstr "Pasvorto (denove)"
-
-#: any.pm:295
-#, c-format
-msgid "Restrict command line options"
-msgstr "Limigu komandliniajn opciojn"
-
-#: any.pm:295
-#, c-format
-msgid "restrict"
-msgstr "limigu"
-
-#: any.pm:297
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Purigu /tmp dum ĉiuj startadoj"
-
-#: any.pm:298
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Preciza kvanto de memoro se bezonata (trovis %d MB)"
-
-#: any.pm:306
-#, c-format
-msgid "Init Message"
-msgstr ""
-
-#: any.pm:308
-#, c-format
-msgid "Open Firmware Delay"
-msgstr ""
-
-#: any.pm:309
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr ""
-
-#: any.pm:310
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Ĉu ebligi CD Boot?"
-
-#: any.pm:311
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Ĉu ebligi OF Boot?"
-
-#: any.pm:312
-#, c-format
-msgid "Default OS?"
-msgstr "Defaŭlta Mastruma Sistemo?"
-
-#: any.pm:365
-#, c-format
-msgid "Image"
-msgstr "Kerna bildo"
-
-#: any.pm:366 any.pm:376
-#, c-format
-msgid "Root"
-msgstr "Radiko"
-
-#: any.pm:367 any.pm:389
-#, c-format
-msgid "Append"
-msgstr "Alfiksu"
-
-#: any.pm:369 standalone/drakboot:263 standalone/drakboot:267
-#, c-format
-msgid "Video mode"
-msgstr "Grafika reĝimo"
-
-#: any.pm:371
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: any.pm:372
-#, fuzzy, c-format
-msgid "Network profile"
-msgstr "Nova profilo..."
-
-#: any.pm:381 any.pm:386 any.pm:388
-#, c-format
-msgid "Label"
-msgstr "Etikedo"
-
-#: any.pm:383 any.pm:393 harddrake/v4l.pm:275 standalone/drakfloppy:84
-#: standalone/drakfloppy:90 standalone/draksec:52
-#, c-format
-msgid "Default"
-msgstr "Defaŭlta"
-
-#: any.pm:390
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-grandeco"
-
-#: any.pm:392
-#, c-format
-msgid "NoVideo"
-msgstr ""
-
-#: any.pm:403
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Malplena etikedo ne estas permesata"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a kernel image"
-msgstr "Vi devas decidi pri kerno-bildo"
-
-#: any.pm:404
-#, c-format
-msgid "You must specify a root partition"
-msgstr "Vi devas difini radikan (root) subdiskon"
-
-#: any.pm:405
-#, c-format
-msgid "This label is already used"
-msgstr "Ĉi tiu etikedo estas jam uzata"
-
-#: any.pm:419
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Kiun specon de enskribo vi deziras aldoni"
-
-#: any.pm:420
-#, c-format
-msgid "Linux"
-msgstr "Linukso"
-
-#: any.pm:420
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Alia Mastruma Sistemo (SunOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Alia Mastruma Sistemo (MacOS...)"
-
-#: any.pm:421
-#, c-format
-msgid "Other OS (Windows...)"
-msgstr "Alia Mastruma Sistemo (Vindozo...)"
-
-#: any.pm:449
-#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
-msgstr ""
-"Jen la diversaj enskriboj.\n"
-"Vi povas aldoni pli aŭ ŝanĝi la ekzistantajn."
-
-#: any.pm:596
-#, c-format
-msgid "access to X programs"
-msgstr "aliro al X-programoj"
-
-#: any.pm:597
-#, c-format
-msgid "access to rpm tools"
-msgstr "aliro al rpm-iloj"
-
-#: any.pm:598
-#, c-format
-msgid "allow \"su\""
-msgstr "permesu \"su\""
-
-#: any.pm:599
-#, c-format
-msgid "access to administrative files"
-msgstr "aliro al administraj dosieroj"
-
-#: any.pm:600
-#, c-format
-msgid "access to network tools"
-msgstr "aliro al retiloj"
-
-#: any.pm:601
-#, c-format
-msgid "access to compilation tools"
-msgstr "aliro al kompililoj"
-
-#: any.pm:606
-#, c-format
-msgid "(already added %s)"
-msgstr "(jam aldonis %s)"
-
-#: any.pm:611
-#, c-format
-msgid "This password is too simple"
-msgstr "Ĉi tiu pasvorto estas tro simpla"
-
-#: any.pm:612
-#, c-format
-msgid "Please give a user name"
-msgstr "Bonvole donu salutnomon"
-
-#: any.pm:613
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Salutnomo devas enhavi nur minusklojn, ciferojn, `-' kaj `_'"
-
-#: any.pm:614
-#, c-format
-msgid "The user name is too long"
-msgstr "Ĉi tiu salutnomo estas tro longa"
-
-#: any.pm:615
-#, c-format
-msgid "This user name has already been added"
-msgstr "Ĉi tiu salutnomo estas jam aldonita"
-
-#: any.pm:619
-#, c-format
-msgid "Add user"
-msgstr "Aldonu uzanto"
-
-#: any.pm:620
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Enigu uzanton\n"
-"%s"
-
-#: any.pm:623 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:157
-#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82 help.pm:530
-#: interactive/http.pm:151 printer/printerdrake.pm:197
-#: printer/printerdrake.pm:382 printer/printerdrake.pm:4857
-#: standalone/drakbackup:2701 standalone/scannerdrake:668
-#: standalone/scannerdrake:818
-#, c-format
-msgid "Done"
-msgstr "Finata"
-
-#: any.pm:624 help.pm:51
-#, c-format
-msgid "Accept user"
-msgstr "Akceptu uzanto"
-
-#: any.pm:635
-#, c-format
-msgid "Real name"
-msgstr "Vera nomo"
-
-#: any.pm:636 standalone/drakbackup:1620
-#, fuzzy, c-format
-msgid "Login name"
-msgstr "Domajna nomo"
-
-#: any.pm:639
-#, c-format
-msgid "Shell"
-msgstr "Ŝelo"
-
-#: any.pm:641
-#, c-format
-msgid "Icon"
-msgstr "Piktogramo"
-
-#: any.pm:688 security/l10n.pm:14
-#, c-format
-msgid "Autologin"
-msgstr "Aŭtomata-enregistrado"
-
-#: any.pm:689
-#, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "Mi povas konfiguri vian komputilon por aŭtomate enirigi unu uzulon"
-
-#: any.pm:690 help.pm:51
-#, c-format
-msgid "Do you want to use this feature?"
-msgstr "Ĉu vi deziras uzi tiun funkcion?"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:444 install_any.pm:887
-#: interactive.pm:158 modules/interactive.pm:71 printer/printerdrake.pm:743
-#: standalone/drakbackup:2501 standalone/drakgw:287 standalone/drakgw:288
-#: standalone/drakgw:296 standalone/drakgw:306 standalone/draksec:55
-#: standalone/harddrake2:306 standalone/net_applet:309 ugtk2.pm:907
-#: wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "Yes"
-msgstr "Jes"
-
-#: any.pm:690 help.pm:180 help.pm:285 help.pm:313 help.pm:444
-#: install_any.pm:887 interactive.pm:158 modules/interactive.pm:71
-#: standalone/drakbackup:2501 standalone/draksec:54 standalone/harddrake2:307
-#: standalone/net_applet:305 ugtk2.pm:907 wizards.pm:156 wizards2.pm:158
-#, c-format
-msgid "No"
-msgstr "Ne"
-
-#: any.pm:692
-#, c-format
-msgid "Choose the default user:"
-msgstr "Elektu la defaŭltan uzulon:"
-
-#: any.pm:693
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Elektu la fenestro-administrilon por lanĉi:"
-
-#: any.pm:706
-#, c-format
-msgid "Please choose a language to use."
-msgstr "Bonvole elektu lingvon por uzi."
-
-#: any.pm:707
-#, fuzzy, c-format
-msgid "Language choice"
-msgstr "Mianmaro"
-
-#: any.pm:733
-#, c-format
-msgid ""
-"Mandriva Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr ""
-"Vi povas elektu aliajn lingvojn kiujn estos uzeblaj malantaŭ la instalado"
-
-#: any.pm:752 any.pm:773 help.pm:647
-#, c-format
-msgid "Use Unicode by default"
-msgstr "Uzu Unikodon defaŭlte"
-
-#: any.pm:753 help.pm:647
-#, c-format
-msgid "All languages"
-msgstr "Ĉiuj lingvoj"
-
-#: any.pm:794 help.pm:566 help.pm:855 install_steps_interactive.pm:947
-#, c-format
-msgid "Country / Region"
-msgstr "Lando"
-
-#: any.pm:795
-#, c-format
-msgid "Please choose your country."
-msgstr "Bonvole elektu vian landon."
-
-#: any.pm:797
-#, c-format
-msgid "Here is the full list of available countries"
-msgstr "Jen la kompleta listo de atingeblaj landoj"
-
-#: any.pm:798
-#, fuzzy, c-format
-msgid "Other Countries"
-msgstr "Aliaj pordoj"
-
-#: any.pm:798 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
-#: interactive.pm:394
-#, c-format
-msgid "Advanced"
-msgstr "Progresinta"
-
-#: any.pm:806
-#, c-format
-msgid "Input method:"
-msgstr ""
-
-#: any.pm:807 install_any.pm:422 network/netconnect.pm:186
-#: network/netconnect.pm:380 network/netconnect.pm:385
-#: network/netconnect.pm:1377 printer/printerdrake.pm:105
-#: printer/printerdrake.pm:2199
-#, c-format
-msgid "None"
-msgstr "Neniom"
-
-#: any.pm:921
-#, c-format
-msgid "No sharing"
-msgstr "Ne kundivido"
-
-#: any.pm:921
-#, c-format
-msgid "Allow all users"
-msgstr "Permesu ĉiujn uzulojn"
-
-#: any.pm:925
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-"Ĉu vi ŝatus permesi al uzuloj kundividi iujn el siaj dosierujoj?\n"
-"Permesi tion ebligos al uzuloj simple klaki sur \"Share\" respektive "
-"\"Kundividu\"\n"
-"en Konkeranto kaj nautilus.\n"
-"\n"
-"\"Custum\" ebligas per-uzulan.\n"
-
-#: any.pm:937
-#, c-format
-msgid ""
-"NFS: the traditional Unix file sharing system, with less support on Mac and "
-"Windows."
-msgstr ""
-
-#: any.pm:940
-#, c-format
-msgid ""
-"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
-"systems."
-msgstr ""
-
-#: any.pm:948
-#, c-format
-msgid ""
-"You can export using NFS or SMB. Please select which you would like to use."
-msgstr "Vi povas eksporti uzante NFS aŭ SMB. Bonvole elektu kiun vi ŝatus uzi."
-
-#: any.pm:973
-#, c-format
-msgid "Launch userdrake"
-msgstr "Lanĉu userdrake"
-
-#: any.pm:973 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
-#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
-#: printer/printerdrake.pm:5166 standalone/drakTermServ:295
-#: standalone/drakbackup:4081 standalone/drakbug:126 standalone/drakfont:497
-#: standalone/drakroam:242 standalone/net_monitor:123
-#: standalone/printerdrake:547
-#, c-format
-msgid "Close"
-msgstr "Malfermu"
-
-#: any.pm:975
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: authentication.pm:24
-#, c-format
-msgid "Local file"
-msgstr "Lokala dosiero"
-
-#: authentication.pm:25
-#, c-format
-msgid "LDAP"
-msgstr "LDAP"
-
-#: authentication.pm:26
-#, c-format
-msgid "NIS"
-msgstr "NIS"
-
-#: authentication.pm:27
-#, c-format
-msgid "Smart Card"
-msgstr ""
-
-#: authentication.pm:28 authentication.pm:153
-#, c-format
-msgid "Windows Domain"
-msgstr "Vindozo Domajno"
-
-#: authentication.pm:29
-#, c-format
-msgid "Active Directory with SFU"
-msgstr ""
-
-#: authentication.pm:30
-#, c-format
-msgid "Active Directory with Winbind"
-msgstr ""
-
-#: authentication.pm:56
-#, fuzzy, c-format
-msgid "Local file:"
-msgstr "Lokaj dosieroj:"
-
-#: authentication.pm:56
-#, c-format
-msgid ""
-"Use local for all authentication and information user tell in local file"
-msgstr ""
-
-#: authentication.pm:57
-#, c-format
-msgid "LDAP:"
-msgstr "LDAP:"
-
-#: authentication.pm:57
-#, c-format
-msgid ""
-"Tells your computer to use LDAP for some or all authentication. LDAP "
-"consolidates certain types of information within your organization."
-msgstr ""
-
-#: authentication.pm:58
-#, c-format
-msgid "NIS:"
-msgstr "NIS:"
-
-#: authentication.pm:58
-#, c-format
-msgid ""
-"Allows you to run a group of computers in the same Network Information "
-"Service domain with a common password and group file."
-msgstr ""
-
-#: authentication.pm:59
-#, c-format
-msgid "Windows Domain:"
-msgstr "Vindozo Domajno:"
-
-#: authentication.pm:59
-#, c-format
-msgid ""
-"Winbind allows the system to retrieve information and authenticate users in "
-"a Windows domain."
-msgstr ""
-
-#: authentication.pm:60
-#, c-format
-msgid "Active Directory with SFU:"
-msgstr ""
-
-#: authentication.pm:60 authentication.pm:61
-#, c-format
-msgid ""
-"Kerberos is a secure system for providing network authentication services."
-msgstr ""
-
-#: authentication.pm:61
-#, c-format
-msgid "Active Directory with Winbind:"
-msgstr ""
-
-#: authentication.pm:86
-#, c-format
-msgid "Authentication LDAP"
-msgstr "Aŭtentikiga LDAP"
-
-#: authentication.pm:87
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
-
-#: authentication.pm:88 share/compssUsers.pl:101
-#, c-format
-msgid "LDAP Server"
-msgstr "LDAP Servilo"
-
-#: authentication.pm:101 fsedit.pm:21
-#, c-format
-msgid "simple"
-msgstr "simpla"
-
-#: authentication.pm:102
-#, c-format
-msgid "TLS"
-msgstr "TLS"
-
-#: authentication.pm:103
-#, c-format
-msgid "SSL"
-msgstr "SSL"
-
-#: authentication.pm:104
-#, c-format
-msgid "security layout (SASL/Kerberos)"
-msgstr ""
-
-#: authentication.pm:111 authentication.pm:149
-#, fuzzy, c-format
-msgid "Authentication Active Directory"
-msgstr "Aŭtentikigado"
-
-#: authentication.pm:112 authentication.pm:151 diskdrake/smbnfs_gtk.pm:181
-#, c-format
-msgid "Domain"
-msgstr "Domajno"
-
-#: authentication.pm:114 diskdrake/dav.pm:63 help.pm:146
-#: printer/printerdrake.pm:141 share/compssUsers.pl:81
-#: standalone/drakTermServ:270
-#, c-format
-msgid "Server"
-msgstr "Servilo"
-
-#: authentication.pm:115
-#, fuzzy, c-format
-msgid "LDAP users database"
-msgstr "Datumbazoj"
-
-#: authentication.pm:116
-#, c-format
-msgid "Use Anonymous BIND "
-msgstr ""
-
-#: authentication.pm:117
-#, c-format
-msgid "LDAP user allowed to browse the Active Directory"
-msgstr ""
-
-#: authentication.pm:118
-#, fuzzy, c-format
-msgid "Password for user"
-msgstr "Pasvorto"
-
-#: authentication.pm:119
-#, c-format
-msgid "Encryption"
-msgstr "Ĉifrado"
-
-#: authentication.pm:130
-#, c-format
-msgid "Authentication NIS"
-msgstr "Aŭtentikiga NIS"
-
-#: authentication.pm:131
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS Domajno"
-
-#: authentication.pm:132
-#, c-format
-msgid "NIS Server"
-msgstr "NIS Servilo"
-
-#: authentication.pm:137
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-msgstr ""
-
-#: authentication.pm:149
-#, c-format
-msgid "Authentication Windows Domain"
-msgstr "Aŭtentikigado Vondoza Domajno"
-
-#: authentication.pm:154
-#, c-format
-msgid "Domain Admin User Name"
-msgstr "Uzulnomo de la Domajna administranto"
-
-#: authentication.pm:155
-#, c-format
-msgid "Domain Admin Password"
-msgstr ""
-
-#: authentication.pm:156
-#, c-format
-msgid "Use Idmap for store UID/SID "
-msgstr ""
-
-#: authentication.pm:157
-#, fuzzy, c-format
-msgid "Default Idmap "
-msgstr "Defaŭlta"
-
-#: authentication.pm:171
-#, c-format
-msgid "Set administrator (root) password and network authentication methods"
-msgstr ""
-
-#: authentication.pm:172
-#, fuzzy, c-format
-msgid "Set administrator (root) password"
-msgstr "Difinu pasvorton de root"
-
-#: authentication.pm:173 standalone/drakvpn:1125
-#, fuzzy, c-format
-msgid "Authentication method"
-msgstr "Aŭtentikigado"
-
-#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:178 help.pm:722
-#, c-format
-msgid "No password"
-msgstr "Neniu pasvorto"
-
-#: authentication.pm:184
-#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Ĉi tiu pasvorto ests tro simpla (ĝi devas esti almenaŭ %d signoj longa)"
-
-#: authentication.pm:189 network/netconnect.pm:385 network/netconnect.pm:689
-#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:492
-#, c-format
-msgid "Authentication"
-msgstr "Aŭtentikigado"
-
-#: authentication.pm:302
-#, c-format
-msgid "Can not use broadcast with no NIS domain"
-msgstr ""
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:751
-#, c-format
-msgid ""
-"Welcome to the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait for default boot.\n"
-"\n"
-msgstr ""
-"Bonvenon al mastruma sistema elektilo!\n"
-"\n"
-"Elektu mastruman sistemon de la supra listo aux\n"
-"atendu por defauxlta starto.\n"
-"\n"
-
-#: bootloader.pm:851
-#, c-format
-msgid "LILO with graphical menu"
-msgstr ""
-
-#: bootloader.pm:852
-#, c-format
-msgid "LILO with text menu"
-msgstr ""
-
-#: bootloader.pm:853
-#, c-format
-msgid "Grub"
-msgstr ""
-
-#: bootloader.pm:854
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: bootloader.pm:929
-#, c-format
-msgid "not enough room in /boot"
-msgstr "mankas sufiĉe da spaco en /boot"
-
-#: bootloader.pm:1389
-#, c-format
-msgid "You can not install the bootloader on a %s partition\n"
-msgstr "Vi ne povas instali la startŝargilon en %s-subdiskon\n"
-
-#: bootloader.pm:1423
-#, c-format
-msgid ""
-"Your bootloader configuration must be updated because partition has been "
-"renumbered"
-msgstr ""
-
-#: bootloader.pm:1436
-#, c-format
-msgid ""
-"The bootloader can not be installed correctly. You have to boot rescue and "
-"choose \"%s\""
-msgstr ""
-
-#: bootloader.pm:1437
-#, fuzzy, c-format
-msgid "Re-install Boot Loader"
-msgstr "Instalu restart-ŝargilon"
-
-#: common.pm:139
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: common.pm:139
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: common.pm:139
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: common.pm:147
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: common.pm:155
-#, c-format
-msgid "%d minutes"
-msgstr "%d minutoj"
-
-#: common.pm:157
-#, c-format
-msgid "1 minute"
-msgstr "1 minuto"
-
-#: common.pm:159
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekundoj"
-
-#: common.pm:261
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu mankas"
-
-#: common.pm:264
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: crypto.pm:14 crypto.pm:49 lang.pm:207 network/adsl_consts.pm:66
-#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
-#, c-format
-msgid "Austria"
-msgstr "Aŭstrio"
-
-#: crypto.pm:15 crypto.pm:48 lang.pm:208 standalone/drakxtv:48
-#, c-format
-msgid "Australia"
-msgstr "Auxstralio"
-
-#: crypto.pm:16 crypto.pm:50 lang.pm:214 network/adsl_consts.pm:93
-#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
-#: network/adsl_consts.pm:123 network/netconnect.pm:51
-#, c-format
-msgid "Belgium"
-msgstr "Belgio"
-
-#: crypto.pm:17 crypto.pm:51 lang.pm:223 network/adsl_consts.pm:132
-#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
-#: network/adsl_consts.pm:161
-#, c-format
-msgid "Brazil"
-msgstr "Brazilo"
-
-#: crypto.pm:18 crypto.pm:52 lang.pm:230
-#, c-format
-msgid "Canada"
-msgstr "Kanado"
-
-#: crypto.pm:19 crypto.pm:75 lang.pm:235 network/adsl_consts.pm:881
-#: network/adsl_consts.pm:890 network/adsl_consts.pm:901
-#, c-format
-msgid "Switzerland"
-msgstr "Svislando"
-
-#: crypto.pm:20 lang.pm:242
-#, c-format
-msgid "Costa Rica"
-msgstr "Kostariko"
-
-#: crypto.pm:21 crypto.pm:53 lang.pm:248 network/adsl_consts.pm:368
-#, c-format
-msgid "Czech Republic"
-msgstr "la Ĉeĥa Respubliko"
-
-#: crypto.pm:22 crypto.pm:58 lang.pm:249 network/adsl_consts.pm:499
-#: network/adsl_consts.pm:508
-#, c-format
-msgid "Germany"
-msgstr "Germanio"
-
-#: crypto.pm:23 crypto.pm:54 lang.pm:251 network/adsl_consts.pm:378
-#, c-format
-msgid "Denmark"
-msgstr "Danlando"
-
-#: crypto.pm:24 crypto.pm:55 lang.pm:256
-#, c-format
-msgid "Estonia"
-msgstr "Estonio"
-
-#: crypto.pm:25 crypto.pm:73 lang.pm:260 network/adsl_consts.pm:749
-#: network/adsl_consts.pm:760 network/adsl_consts.pm:771
-#: network/adsl_consts.pm:782 network/adsl_consts.pm:791
-#: network/adsl_consts.pm:800 network/adsl_consts.pm:809
-#: network/adsl_consts.pm:818 network/adsl_consts.pm:827
-#: network/adsl_consts.pm:836 network/adsl_consts.pm:845
-#: network/adsl_consts.pm:854 network/adsl_consts.pm:863
-#, c-format
-msgid "Spain"
-msgstr "Hispanujo"
-
-#: crypto.pm:26 crypto.pm:56 lang.pm:262 network/adsl_consts.pm:387
-#, c-format
-msgid "Finland"
-msgstr "Finnlando"
-
-#: crypto.pm:27 crypto.pm:57 lang.pm:267 network/adsl_consts.pm:396
-#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
-#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
-#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
-#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
-#: network/netconnect.pm:48
-#, c-format
-msgid "France"
-msgstr "Francio"
-
-#: crypto.pm:28 crypto.pm:59 lang.pm:280 network/adsl_consts.pm:519
-#, c-format
-msgid "Greece"
-msgstr "Grekio"
-
-#: crypto.pm:29 crypto.pm:60 lang.pm:291 network/adsl_consts.pm:528
-#, c-format
-msgid "Hungary"
-msgstr "Hungario"
-
-#: crypto.pm:30 crypto.pm:61 lang.pm:293 network/adsl_consts.pm:537
-#: standalone/drakxtv:47
-#, c-format
-msgid "Ireland"
-msgstr "Irlando"
-
-#: crypto.pm:31 crypto.pm:62 lang.pm:294 network/adsl_consts.pm:546
-#, c-format
-msgid "Israel"
-msgstr "Israelo"
-
-#: crypto.pm:32 crypto.pm:63 lang.pm:300 network/adsl_consts.pm:557
-#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
-#: network/adsl_consts.pm:589 network/netconnect.pm:50 standalone/drakxtv:47
-#, c-format
-msgid "Italy"
-msgstr "Italio"
-
-#: crypto.pm:33 crypto.pm:64 lang.pm:303
-#, c-format
-msgid "Japan"
-msgstr "Japanio"
-
-#: crypto.pm:34 crypto.pm:65 lang.pm:352 network/adsl_consts.pm:620
-#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
-#: network/adsl_consts.pm:647 network/netconnect.pm:49
-#, c-format
-msgid "Netherlands"
-msgstr "Nederlando"
-
-#: crypto.pm:35 crypto.pm:67 lang.pm:353 network/adsl_consts.pm:656
-#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
-#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
-#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
-#, c-format
-msgid "Norway"
-msgstr "Norvegio"
-
-#: crypto.pm:36 crypto.pm:66 lang.pm:357
-#, c-format
-msgid "New Zealand"
-msgstr "Nov-Zelando"
-
-#: crypto.pm:37 crypto.pm:68 lang.pm:365 network/adsl_consts.pm:693
-#: network/adsl_consts.pm:704
-#, c-format
-msgid "Poland"
-msgstr "Pollando"
-
-#: crypto.pm:38 crypto.pm:69 lang.pm:370 network/adsl_consts.pm:716
-#, c-format
-msgid "Portugal"
-msgstr "Portugalujo"
-
-#: crypto.pm:39 crypto.pm:70 lang.pm:376 network/adsl_consts.pm:725
-#, c-format
-msgid "Russia"
-msgstr "Rusio"
-
-#: crypto.pm:40 crypto.pm:74 lang.pm:382 network/adsl_consts.pm:872
-#, c-format
-msgid "Sweden"
-msgstr "Svedio"
-
-#: crypto.pm:41 crypto.pm:71 lang.pm:387
-#, c-format
-msgid "Slovakia"
-msgstr "Slovakujo"
-
-#: crypto.pm:42 crypto.pm:77 lang.pm:401 network/adsl_consts.pm:910
-#, c-format
-msgid "Thailand"
-msgstr "Tajlando"
-
-#: crypto.pm:43 crypto.pm:76 lang.pm:411
-#, c-format
-msgid "Taiwan"
-msgstr "Tajvano"
-
-#: crypto.pm:44 crypto.pm:72 lang.pm:430 standalone/drakxtv:49
-#, c-format
-msgid "South Africa"
-msgstr "Sud-Afriko"
-
-#: crypto.pm:78 crypto.pm:108 lang.pm:416 network/netconnect.pm:52
-#, c-format
-msgid "United States"
-msgstr "Usono"
-
-#: diskdrake/dav.pm:17
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
-"WebDAV estas protokolo kiu ebligas al vi kroĉi interretservilan dosierujon\n"
-"loke, kaj trakti ĝin kvazaŭ lokan dosiersistemon (kondiĉe ke la retservilo "
-"estu\n"
-"konfigurita kiel WebDAV-servilo). Se vi deziras aldoni WebDAF-kroĉpunktojn,\n"
-"elektu \"New\"."
-
-#: diskdrake/dav.pm:25
-#, c-format
-msgid "New"
-msgstr "Nova"
-
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
-#, c-format
-msgid "Unmount"
-msgstr "Malmuntu"
-
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:448 diskdrake/smbnfs_gtk.pm:76
-#, c-format
-msgid "Mount"
-msgstr "Muntu"
-
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:443
-#: diskdrake/interactive.pm:668 diskdrake/interactive.pm:687
-#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:79
-#, c-format
-msgid "Mount point"
-msgstr "Surmetingo"
-
-#: diskdrake/dav.pm:83
-#, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Bonvole entajpu la servilan URL de la WebDAV"
-
-#: diskdrake/dav.pm:87
-#, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "La URL devas komenci per http:// aŭ https://"
-
-#: diskdrake/dav.pm:109
-#, c-format
-msgid "Server: "
-msgstr "Servilo:"
-
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:519
-#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1260
-#, c-format
-msgid "Mount point: "
-msgstr "Surmetingo: "
-
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
-#, c-format
-msgid "Options: %s"
-msgstr "Opcioj: %s"
-
-#: diskdrake/hd_gtk.pm:95
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Bonvolu fari rezervan kopion de via dateno antaŭe"
-
-#: diskdrake/hd_gtk.pm:98
-#, c-format
-msgid ""
-"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Se vi intencas uzi \"aboot\", zorgu lasi liberan spacon (2048 sektoroj "
-"sufiĉas)\n"
-"ĉe la komenco de la disko"
-
-#: diskdrake/hd_gtk.pm:155 help.pm:530
-#, c-format
-msgid "Wizard"
-msgstr "Sorĉisto"
-
-#: diskdrake/hd_gtk.pm:188
-#, c-format
-msgid "Choose action"
-msgstr "Elektu agon"
-
-#: diskdrake/hd_gtk.pm:192
-#, c-format
-msgid ""
-"You have one big Microsoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
-msgstr ""
-"Vi havas unu grandan Microsoft-Vindozan subdiskon.\n"
-"Mi proponas ke vi unue regrandecigu tiun subdiskon\n"
-"(klaku sur ĝin, kaj poste klaku sur \"Regrandecigu\")"
-
-#: diskdrake/hd_gtk.pm:194
-#, c-format
-msgid "Please click on a partition"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: diskdrake/hd_gtk.pm:208 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:481
-#: standalone/drakbackup:2936 standalone/drakbackup:2996
-#, c-format
-msgid "Details"
-msgstr "Detaloj"
-
-#: diskdrake/hd_gtk.pm:254
-#, c-format
-msgid "No hard drives found"
-msgstr "Neniaj durdiskoj trovitaj"
-
-# this entry must not be too long, or the window gets tooooo wiiiiiide
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Swap"
-msgstr "Interŝanĝa"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "HFS"
-msgstr "HFS"
-
-#: diskdrake/hd_gtk.pm:338
-#, c-format
-msgid "Windows"
-msgstr "Vindozo"
-
-#: diskdrake/hd_gtk.pm:339 diskdrake/interactive.pm:1200
-#, c-format
-msgid "Empty"
-msgstr "Malplena"
-
-#: diskdrake/hd_gtk.pm:343
-#, c-format
-msgid "Filesystem types:"
-msgstr "Specoj de dosiersistemoj:"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:362 diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Uzu ``%s'' anstataŭe"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/interactive.pm:468
-#, c-format
-msgid "Create"
-msgstr "Kreu"
-
-#: diskdrake/hd_gtk.pm:360 diskdrake/hd_gtk.pm:368
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:621
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
-#: standalone/harddrake2:107 standalone/harddrake2:116
-#, c-format
-msgid "Type"
-msgstr "Tipo"
-
-#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:452
-#: standalone/drakperm:124 standalone/printerdrake:235
-#, c-format
-msgid "Delete"
-msgstr "Forigu"
-
-#: diskdrake/hd_gtk.pm:368
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Uzu ``Malmuntu'' antaŭe"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose another partition"
-msgstr "Elektu alian subdiskon"
-
-#: diskdrake/interactive.pm:191
-#, c-format
-msgid "Choose a partition"
-msgstr "Elektu subdiskon"
-
-#: diskdrake/interactive.pm:220
-#, c-format
-msgid "Exit"
-msgstr "Eliro"
-
-#: diskdrake/interactive.pm:253 help.pm:530
-#, c-format
-msgid "Undo"
-msgstr "Malfaru"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Ŝanĝu al Normala reĝimo"
-
-#: diskdrake/interactive.pm:253
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Ŝanĝu al Spertula reĝimo"
-
-#: diskdrake/interactive.pm:272
-#, c-format
-msgid "Continue anyway?"
-msgstr "Ĉu mi devus daŭri malgraŭe?"
-
-#: diskdrake/interactive.pm:275
-#, c-format
-msgid ""
-"You should format partition %s.\n"
-"Otherwise no entry for mount point %s will be written in fstab.\n"
-"Quit anyway?"
-msgstr ""
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without saving"
-msgstr "Ĉu eliru sen konservi"
-
-#: diskdrake/interactive.pm:282
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Ĉu eliru sen skribi la subdisktabelon?"
-
-#: diskdrake/interactive.pm:287
-#, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Ĉu vi deziras konservi la modifojn en /etc/fstab?"
-
-#: diskdrake/interactive.pm:294 install_steps_interactive.pm:329
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Vi bezonas restarti por la ŝanĝoj al la subdisktabelo efektivigi"
-
-#: diskdrake/interactive.pm:307 help.pm:530
-#, c-format
-msgid "Clear all"
-msgstr "Forviŝu ĉion"
-
-#: diskdrake/interactive.pm:308 help.pm:530
-#, c-format
-msgid "Auto allocate"
-msgstr "Aŭtomate disponigu"
-
-#: diskdrake/interactive.pm:309 help.pm:530 help.pm:566 help.pm:606
-#: help.pm:855 install_steps_interactive.pm:122
-#, c-format
-msgid "More"
-msgstr "Plu"
-
-#: diskdrake/interactive.pm:314
-#, c-format
-msgid "Hard drive information"
-msgstr "Informoj pri fiksdisko(j)"
-
-#: diskdrake/interactive.pm:346
-#, c-format
-msgid "All primary partitions are used"
-msgstr "Ĉiuj el la subdiskoj estas uzata"
-
-#: diskdrake/interactive.pm:347
-#, c-format
-msgid "I can not add any more partitions"
-msgstr "Mi ne povas aldoni plu da subdiskoj"
-
-#: diskdrake/interactive.pm:348
-#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"Por havi plu da subdiskoj, bonvole forigu unu por povi krei etendigitan\n"
-"subdiskon"
-
-#: diskdrake/interactive.pm:357
-#, c-format
-msgid "No supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:358
-#, c-format
-msgid "Supermount"
-msgstr ""
-
-#: diskdrake/interactive.pm:359
-#, c-format
-msgid "Supermount except for CDROM drives"
-msgstr ""
-
-#: diskdrake/interactive.pm:365 help.pm:530
-#, c-format
-msgid "Save partition table"
-msgstr "Konservu la subdiskotabelon"
-
-#: diskdrake/interactive.pm:366 help.pm:530
-#, c-format
-msgid "Restore partition table"
-msgstr "Restaŭru subdiskotabelon"
-
-#: diskdrake/interactive.pm:367 help.pm:530
-#, c-format
-msgid "Rescue partition table"
-msgstr "Sava subdiskotabelo"
-
-#: diskdrake/interactive.pm:369 help.pm:530
-#, c-format
-msgid "Reload partition table"
-msgstr "Reŝargu subdiskotabelon"
-
-#: diskdrake/interactive.pm:371
-#, c-format
-msgid "Removable media automounting"
-msgstr "Aŭtomata kroĉado de demeteblaj aparatoj"
-
-#: diskdrake/interactive.pm:384 diskdrake/interactive.pm:410
-#, c-format
-msgid "Select file"
-msgstr "Elektu dosieron"
-
-#: diskdrake/interactive.pm:396
-#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
-msgstr ""
-"La rezerva subdisktabelo ne estas la sama grandeco\n"
-"Ĉu daŭras tamen?"
-
-#: diskdrake/interactive.pm:425
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Provas savi subdisktabelon"
-
-#: diskdrake/interactive.pm:431
-#, c-format
-msgid "Detailed information"
-msgstr "Detala informo"
-
-#: diskdrake/interactive.pm:446 diskdrake/interactive.pm:762
-#, c-format
-msgid "Resize"
-msgstr "Regrandecigu"
-
-#: diskdrake/interactive.pm:447
-#, c-format
-msgid "Format"
-msgstr "Formatu"
-
-#: diskdrake/interactive.pm:449
-#, c-format
-msgid "Add to RAID"
-msgstr "Aldonu al RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: diskdrake/interactive.pm:450
-#, c-format
-msgid "Add to LVM"
-msgstr "Aldonu al LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: diskdrake/interactive.pm:453
-#, c-format
-msgid "Remove from RAID"
-msgstr "Forigu de RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: diskdrake/interactive.pm:454
-#, c-format
-msgid "Remove from LVM"
-msgstr "Forigu de LVM (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: diskdrake/interactive.pm:455
-#, c-format
-msgid "Modify RAID"
-msgstr "Ŝanĝu RAID (Redundanca Aro de Malmultekostaj Diskoj)"
-
-#: diskdrake/interactive.pm:456
-#, c-format
-msgid "Use for loopback"
-msgstr "Uzu por retrokonektado"
-
-#: diskdrake/interactive.pm:512
-#, c-format
-msgid "Create a new partition"
-msgstr "Kreu novan subdiskon"
-
-#: diskdrake/interactive.pm:515
-#, c-format
-msgid "Start sector: "
-msgstr "Komenca sektoro: "
-
-#: diskdrake/interactive.pm:517 diskdrake/interactive.pm:919
-#, c-format
-msgid "Size in MB: "
-msgstr "Grandeco en MB: "
-
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:920
-#, c-format
-msgid "Filesystem type: "
-msgstr "Speco de dosiersistemo: "
-
-#: diskdrake/interactive.pm:523
-#, c-format
-msgid "Preference: "
-msgstr "Prefero: "
-
-#: diskdrake/interactive.pm:526
-#, fuzzy, c-format
-msgid "Logical volume name "
-msgstr "Lokaj dosieroj"
-
-#: diskdrake/interactive.pm:556
-#, c-format
-msgid ""
-"You can not create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
-msgstr ""
-"Vi ne povas krei novan subdiskon\n"
-"(ĉar vi atingis la maksimuman nombron da primaraj subdiskoj).\n"
-"Unue forigu primaran subdiskon kaj kreu etenditan subdiskon."
-
-#: diskdrake/interactive.pm:586
-#, c-format
-msgid "Remove the loopback file?"
-msgstr "Ĉu forigu la retrokonektan dosieron?"
-
-#: diskdrake/interactive.pm:605
-#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi ŝanĝas la specon de subdisko %s, ĉiuj datenoj en ĉi tiu subdisko "
-"estos\n"
-"perdata"
-
-#: diskdrake/interactive.pm:617
-#, c-format
-msgid "Change partition type"
-msgstr "Ŝanĝu subdiskspecon"
-
-#: diskdrake/interactive.pm:618 diskdrake/removable.pm:47
-#, c-format
-msgid "Which filesystem do you want?"
-msgstr "Kiun dosierosistemo vi deziras uzi?"
-
-#: diskdrake/interactive.pm:626
-#, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Ŝaltas de ext2 al ext3"
-
-#: diskdrake/interactive.pm:655
-#, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Kie vi deziras kroĉi retrokonektan dosieron %s?"
-
-#: diskdrake/interactive.pm:656
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Kie vi deziras munti aparato %s?"
-
-#: diskdrake/interactive.pm:661
-#, c-format
-msgid ""
-"Can not unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Ne povas malfiksi surmetingon ĉar ĉi tiu subdisko estas uzata por\n"
-"retrokonektado.  Unue forigu la retrokonektadon."
-
-#: diskdrake/interactive.pm:686
-#, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Kie vi deziras kroĉi aparaton %s?"
-
-#: diskdrake/interactive.pm:710 diskdrake/interactive.pm:793
-#: install_interactive.pm:156 install_interactive.pm:188
-#, c-format
-msgid "Resizing"
-msgstr "Regrandecigas"
-
-#: diskdrake/interactive.pm:710
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Kalkulas FAT dosiersistemajn limojn"
-
-#: diskdrake/interactive.pm:750
-#, c-format
-msgid "This partition is not resizeable"
-msgstr "Ĉi tiu subdisko ne estas regrandecigebla"
-
-#: diskdrake/interactive.pm:755
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Ĉiuj datenoj en ĉi tiu subdisko devus esti rezervata"
-
-#: diskdrake/interactive.pm:757
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi regrandecigas subdiskon %s, ĉiuj datenoj en ĉi tiu subdisko estos\n"
-"perdata"
-
-#: diskdrake/interactive.pm:762
-#, c-format
-msgid "Choose the new size"
-msgstr "Elektu la novan grandecon"
-
-#: diskdrake/interactive.pm:763
-#, c-format
-msgid "New size in MB: "
-msgstr "Nova grandeco en MB: "
-
-#: diskdrake/interactive.pm:806 install_interactive.pm:196
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
-msgstr ""
-
-#: diskdrake/interactive.pm:844
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Elektu ekzistantan RAID por aldoni"
-
-#: diskdrake/interactive.pm:846 diskdrake/interactive.pm:863
-#, c-format
-msgid "new"
-msgstr "nova"
-
-#: diskdrake/interactive.pm:861
-#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr ""
-"Elektu ekzistantan RAID (Redundanca Aro de Malmultekostaj Diskoj) por\n"
-"aldoni al"
-
-#: diskdrake/interactive.pm:867
-#, c-format
-msgid "LVM name?"
-msgstr "LVM-nomo?"
-
-#: diskdrake/interactive.pm:904
-#, c-format
-msgid "This partition can not be used for loopback"
-msgstr "Vi ne povas uzi ĉi tiun subdiskon por retrokonektado"
-
-#: diskdrake/interactive.pm:917
-#, c-format
-msgid "Loopback"
-msgstr "Retrokonektado"
-
-#: diskdrake/interactive.pm:918
-#, c-format
-msgid "Loopback file name: "
-msgstr "Retrokonekta dosieronomo: "
-
-#: diskdrake/interactive.pm:923
-#, c-format
-msgid "Give a file name"
-msgstr "Donu dosiernomon"
-
-#: diskdrake/interactive.pm:926
-#, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Dosiero jam uzata de alia retrokonektado, elektu alian"
-
-#: diskdrake/interactive.pm:927
-#, c-format
-msgid "File already exists. Use it?"
-msgstr "Dosiero jam ekzistas.  Ĉu vi deziras uzi ĝin?"
-
-#: diskdrake/interactive.pm:950
-#, c-format
-msgid "Mount options"
-msgstr "Kroĉ-opcioj"
-
-#: diskdrake/interactive.pm:957
-#, c-format
-msgid "Various"
-msgstr "Diversaj"
-
-#: diskdrake/interactive.pm:1021
-#, c-format
-msgid "device"
-msgstr "aparato"
-
-#: diskdrake/interactive.pm:1022
-#, c-format
-msgid "level"
-msgstr "nivelo"
-
-#: diskdrake/interactive.pm:1023
-#, fuzzy, c-format
-msgid "chunk size in KiB"
-msgstr "grandeco de pecoj"
-
-#: diskdrake/interactive.pm:1040
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Zorgu: ĉi tiu operacio estas danĝera."
-
-#: diskdrake/interactive.pm:1055
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Kiun specon de subdiskado?"
-
-#: diskdrake/interactive.pm:1093
-#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Vi bezonos restarti antaŭ ol la ŝanĝo povas efektiviĝi"
-
-#: diskdrake/interactive.pm:1102
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "La subdisktabelo de drajvo %s estos skribata al disko!"
-
-#: diskdrake/interactive.pm:1115
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"Post vi formatas la subdiskon %s, ĉiuj datenoj en ĉi tiu subdisko estos\n"
-"perdata"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Move files to the new partition"
-msgstr "Movu dosierojn al la nova subdisko"
-
-#: diskdrake/interactive.pm:1131
-#, c-format
-msgid "Hide files"
-msgstr "Kaŝu dosierojn"
-
-#: diskdrake/interactive.pm:1132
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Dosierujo %s entenas jam datenojn\n"
-"(%s)"
-
-#: diskdrake/interactive.pm:1143
-#, c-format
-msgid "Moving files to the new partition"
-msgstr "Mi movas dosierojn al la nova subdisko"
-
-#: diskdrake/interactive.pm:1147
-#, c-format
-msgid "Copying %s"
-msgstr "Kopianta %s"
-
-#: diskdrake/interactive.pm:1151
-#, c-format
-msgid "Removing %s"
-msgstr "Mi forigas %s"
-
-#: diskdrake/interactive.pm:1165
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr "subdisko %s estas nun konata kiel %s"
-
-#: diskdrake/interactive.pm:1166
-#, c-format
-msgid "Partitions have been renumbered: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1245
-#, c-format
-msgid "Device: "
-msgstr "Aparato: "
-
-#: diskdrake/interactive.pm:1187
-#, fuzzy, c-format
-msgid "Devfs name: "
-msgstr "Poŝtejo: "
-
-#: diskdrake/interactive.pm:1188
-#, c-format
-msgid "Volume label: "
-msgstr ""
-
-#: diskdrake/interactive.pm:1189
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-a diskingolitero: %s (nur konjekto)\n"
-
-#: diskdrake/interactive.pm:1193 diskdrake/interactive.pm:1202
-#: diskdrake/interactive.pm:1263
-#, c-format
-msgid "Type: "
-msgstr "Speco: "
-
-#: diskdrake/interactive.pm:1197 install_steps_gtk.pm:295
-#, c-format
-msgid "Name: "
-msgstr "Nomo: "
-
-#: diskdrake/interactive.pm:1204
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Komenco: sektoro %s\n"
-
-#: diskdrake/interactive.pm:1205
-#, c-format
-msgid "Size: %s"
-msgstr "Grandeco: %s"
-
-#: diskdrake/interactive.pm:1207
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektoroj"
-
-#: diskdrake/interactive.pm:1209
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "cilindro %d ĝis cilindro %d\n"
-
-#: diskdrake/interactive.pm:1210
-#, c-format
-msgid "Number of logical extents: %d\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1211
-#, c-format
-msgid "Formatted\n"
-msgstr "Formatita\n"
-
-#: diskdrake/interactive.pm:1212
-#, c-format
-msgid "Not formatted\n"
-msgstr "Ne formatita\n"
-
-#: diskdrake/interactive.pm:1213
-#, c-format
-msgid "Mounted\n"
-msgstr "Muntita\n"
-
-#: diskdrake/interactive.pm:1214
-#, c-format
-msgid "RAID %s\n"
-msgstr "RAID (Redundanca Aro de Malmultekostaj Diskoj) %s\n"
-
-#: diskdrake/interactive.pm:1216
-#, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr ""
-"Retrokonekta(j) dosiero(j):\n"
-"...%s\n"
-
-#: diskdrake/interactive.pm:1217
-#, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Subdisko startata defaŭlte\n"
-"    (por MS-DOS starto, ne por \"lilo\")\n"
-
-#: diskdrake/interactive.pm:1219
-#, c-format
-msgid "Level %s\n"
-msgstr "Nivelo %s\n"
-
-#: diskdrake/interactive.pm:1220
-#, fuzzy, c-format
-msgid "Chunk size %d KiB\n"
-msgstr "Grandeco de pecoj %s\n"
-
-#: diskdrake/interactive.pm:1221
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: diskdrake/interactive.pm:1223
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Retrokonekta dosieronomo: %s"
-
-#: diskdrake/interactive.pm:1226
-#, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Povas esti, ke tiu ĉi subdisko estas\n"
-"pelila subdisko. Prefere\n"
-"lasu ĝin sola.\n"
-
-#: diskdrake/interactive.pm:1229
-#, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-
-#: diskdrake/interactive.pm:1246
-#, c-format
-msgid "Read-only"
-msgstr "Nur-lege"
-
-#: diskdrake/interactive.pm:1247
-#, c-format
-msgid "Size: %s\n"
-msgstr "Grandeco: %s\n"
-
-#: diskdrake/interactive.pm:1248
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrio: %s cilindroj, %s kapoj, %s sektoroj\n"
-
-#: diskdrake/interactive.pm:1249
-#, c-format
-msgid "Info: "
-msgstr "Informo: "
-
-#: diskdrake/interactive.pm:1250
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-aj (Redundanca Aro de Malmultekostaj Diskoj) diskoj %s\n"
-
-#: diskdrake/interactive.pm:1251
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Subdiskotabelospeco: %s\n"
-
-#: diskdrake/interactive.pm:1252
-#, c-format
-msgid "on channel %d id %d\n"
-msgstr "ĉe kanalo %d identigaĵo %d\n"
-
-#: diskdrake/interactive.pm:1287
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Speco de dosiersistemo: "
-
-#: diskdrake/interactive.pm:1288
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
-
-#: diskdrake/interactive.pm:1291
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Ĉi tiu pasvorto ests tro simpla (ĝi devas esti almenaŭ %d signoj longa)"
-
-#: diskdrake/interactive.pm:1292
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "La pasvortoj ne egalas"
-
-#: diskdrake/interactive.pm:1295 network/netconnect.pm:1222
-#: standalone/drakconnect:430
-#, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: diskdrake/interactive.pm:1296
-#, c-format
-msgid "Encryption key (again)"
-msgstr ""
-
-#: diskdrake/interactive.pm:1297 standalone/drakvpn:1031
-#: standalone/drakvpn:1116
-#, fuzzy, c-format
-msgid "Encryption algorithm"
-msgstr "Aŭtentikigado"
-
-#: diskdrake/removable.pm:46
-#, c-format
-msgid "Change type"
-msgstr "Ŝanĝu specon"
-
-#: diskdrake/smbnfs_gtk.pm:163
-#, c-format
-msgid "Can not login using username %s (bad password?)"
-msgstr "Ne povas akcepti uzante uzulnomon %s (ĉu malĝusta pasvorto?)"
-
-#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
-#, c-format
-msgid "Domain Authentication Required"
-msgstr "Aŭtentikigado de domajno postulata"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Which username"
-msgstr "Kiu salutnomo"
-
-#: diskdrake/smbnfs_gtk.pm:168
-#, c-format
-msgid "Another one"
-msgstr "Iu alia"
-
-#: diskdrake/smbnfs_gtk.pm:177
-#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Bonvole tajpu vian uzulnomon, pasvorton kaj domajn-nomon por aliri al tiu "
-"gastiganto."
-
-#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3487
-#, c-format
-msgid "Username"
-msgstr "Uzulnomo"
-
-#: diskdrake/smbnfs_gtk.pm:205
-#, c-format
-msgid "Search servers"
-msgstr "Serĉu servilojn"
-
-#: diskdrake/smbnfs_gtk.pm:210
-#, fuzzy, c-format
-msgid "Search new servers"
-msgstr "Serĉu servilojn"
-
-#: do_pkgs.pm:16 do_pkgs.pm:31
-#, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Ĉi tiu pakaĵo %s devas esti instalita. Ĉu vi deziras instali ĝin?"
-
-#: do_pkgs.pm:21 do_pkgs.pm:36
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
-
-#: do_pkgs.pm:182
-#, c-format
-msgid "Installing packages..."
-msgstr "Instalanta pakaĵojn..."
-
-#: do_pkgs.pm:227
-#, fuzzy, c-format
-msgid "Removing packages..."
-msgstr "Distingivo: %s\n"
-
-#: fs.pm:487 fs.pm:536
-#, c-format
-msgid "Mounting partition %s"
-msgstr "Enkroĉas subdiskon %s"
-
-#: fs.pm:488 fs.pm:537
-#, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: fs.pm:508 fs.pm:515
-#, c-format
-msgid "Checking %s"
-msgstr "Kontrolanta %s"
-
-#: fs.pm:553 partition_table.pm:391
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "eraro dum malmunti %s: %s"
-
-#: fs.pm:585
-#, c-format
-msgid "Enabling swap partition %s"
-msgstr "Ebligas swap-subdiskon %s"
-
-#: fs/format.pm:44 fs/format.pm:51
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Formatas subdiskon %s"
-
-#: fs/format.pm:48
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Kreas kaj formatas dosieron %s"
-
-#: fs/format.pm:83
-#, c-format
-msgid "I do not know how to format %s in type %s"
-msgstr "ne scias kiel formati %s kiel speco %s"
-
-#: fs/format.pm:88 fs/format.pm:90
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatado de %s malsukcesis"
-
-#: fs/mount_options.pm:112
-#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
-msgstr ""
-
-#: fs/mount_options.pm:115
-#, c-format
-msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
-msgstr ""
-
-#: fs/mount_options.pm:118
-#, c-format
-msgid "Do not interpret character or block special devices on the file system."
-msgstr ""
-
-#: fs/mount_options.pm:120
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
-
-#: fs/mount_options.pm:124
-#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
-
-#: fs/mount_options.pm:128
-#, c-format
-msgid "Mount the file system read-only."
-msgstr ""
-
-#: fs/mount_options.pm:130
-#, c-format
-msgid "All I/O to the file system should be done synchronously."
-msgstr ""
-
-#: fs/mount_options.pm:134
-#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
-
-#: fs/mount_options.pm:142
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr ""
-
-#: fs/mount_options.pm:144
-#, c-format
-msgid "Give read-only access to ordinary users"
-msgstr ""
-
-#: fs/type.pm:372
-#, c-format
-msgid "You can not use JFS for partitions smaller than 16MB"
-msgstr "Vi ne povas uzi JFS por subdisko pli malgranda ol 16MB"
-
-#: fs/type.pm:373
-#, c-format
-msgid "You can not use ReiserFS for partitions smaller than 32MB"
-msgstr "Vi ne povas uzi ReiserFS por subdisko pli malgranda ol 32MB"
-
-#: fsedit.pm:25
-#, c-format
-msgid "with /usr"
-msgstr "kun /usr"
-
-#: fsedit.pm:30
-#, c-format
-msgid "server"
-msgstr "servilo"
-
-#: fsedit.pm:183
-#, c-format
-msgid ""
-"I can not read the partition table of device %s, it's too corrupted for me :"
-"(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
-msgstr ""
-"Mi ne povas legi vian subdisktabelon de aparato %s, ĝi estas tro difektita "
-"por mi :(\n"
-"Mi povas provi daŭri per blankigi difektitajn subdiskojn (ĈIOM DA DATUMO\n"
-"pereos!).  La alia solvo estas malpermesi al DrakX ŝanĝi la subdisktabelon.\n"
-"(la eraro estas %s)\n"
-"\n"
-"Ĉu vi konsentas perdi ĉiujn subdiskojn?\n"
-
-#: fsedit.pm:400
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Surmetingoj devas komenci kun antaŭa /"
-
-#: fsedit.pm:401
-#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Surmetingoj devas enteni nur alfanumerajn signojn"
-
-#: fsedit.pm:402
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Jam estas subdisko kun surmetingo ĉe %s\n"
-
-#: fsedit.pm:404
-#, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
-"Neniu startŝargilo povas trakti tion sen /boot subdisko.\n"
-"Bonvole zorgu aldoni /boot subdiskon."
-
-#: fsedit.pm:407
-#, c-format
-msgid "You can not use a LVM Logical Volume for mount point %s"
-msgstr "Vi ne povas uzi LVM-logikan subdiskon por kroĉpunkto %s"
-
-#: fsedit.pm:409
-#, fuzzy, c-format
-msgid ""
-"You've selected a LVM Logical Volume as root (/).\n"
-"The bootloader is not able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Vi elektis softvaran RAID-an subdiskon por la radika dosiersistemo (/).\n"
-"Neniu startŝargilo povas trakti tion sen /boot subdisko.\n"
-"Bonvole zorgu aldoni /boot subdiskon."
-
-#: fsedit.pm:412
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo does not handle a LV on "
-"multiple PVs)"
-msgstr ""
-
-#: fsedit.pm:415 fsedit.pm:417
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Ĉi tiu dosierujo devus resti interne de la radika dosierosistemo (/)"
-
-#: fsedit.pm:419 fsedit.pm:421
-#, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"Vi bezonas veran dosiersistemon (ext2, reiserfs, xfs aŭ jfs) por tiu "
-"surmetingo\n"
-
-#: fsedit.pm:423
-#, c-format
-msgid "You can not use an encrypted file system for mount point %s"
-msgstr "Vi ne povas uzi kriptan dosiersistemon por surmetingo %s"
-
-#: fsedit.pm:484
-#, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Ne sufiĉe da libera spaco por aŭtomate disponigi novajn subdiskojn"
-
-#: fsedit.pm:486
-#, c-format
-msgid "Nothing to do"
-msgstr ""
-
-#: harddrake/data.pm:62 install_any.pm:1639
-#, c-format
-msgid "Floppy"
-msgstr "Disketo"
-
-#: harddrake/data.pm:72
-#, c-format
-msgid "Zip"
-msgstr "Zip"
-
-#: harddrake/data.pm:88 install_any.pm:1640
-#, c-format
-msgid "Hard Disk"
-msgstr "Disko"
-
-#: harddrake/data.pm:97 install_any.pm:1641
-#, c-format
-msgid "CDROM"
-msgstr "KDROMO"
-
-#: harddrake/data.pm:107
-#, c-format
-msgid "CD/DVD burners"
-msgstr "KD/DVD-skribiloj"
-
-#: harddrake/data.pm:117
-#, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
-
-#: harddrake/data.pm:127 standalone/drakbackup:2034
-#, c-format
-msgid "Tape"
-msgstr "Bendo"
-
-#: harddrake/data.pm:136
-#, c-format
-msgid "Videocard"
-msgstr "Videocard"
-
-#: harddrake/data.pm:146
-#, c-format
-msgid "DVB card"
-msgstr ""
-
-#: harddrake/data.pm:154
-#, c-format
-msgid "Tvcard"
-msgstr "Tvcard"
-
-#: harddrake/data.pm:163
-#, c-format
-msgid "Other MultiMedia devices"
-msgstr "Alia bildson-aparatoj"
-
-#: harddrake/data.pm:172
-#, c-format
-msgid "Soundcard"
-msgstr "Sonorokarto"
-
-#: harddrake/data.pm:185
-#, c-format
-msgid "Webcam"
-msgstr "Webcam"
-
-#: harddrake/data.pm:199
-#, c-format
-msgid "Processors"
-msgstr "Procesiloj"
-
-#: harddrake/data.pm:209
-#, fuzzy, c-format
-msgid "ISDN adapters"
-msgstr "Interna ISDN-karto"
-
-#: harddrake/data.pm:220
-#, c-format
-msgid "USB sound devices"
-msgstr ""
-
-#: harddrake/data.pm:229
-#, c-format
-msgid "Radio cards"
-msgstr ""
-
-#: harddrake/data.pm:238
-#, c-format
-msgid "ATM network cards"
-msgstr ""
-
-#: harddrake/data.pm:247
-#, c-format
-msgid "WAN network cards"
-msgstr ""
-
-#: harddrake/data.pm:256
-#, c-format
-msgid "Bluetooth devices"
-msgstr ""
-
-#: harddrake/data.pm:265
-#, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet-karto"
-
-#: harddrake/data.pm:283 network/netconnect.pm:575
-#, c-format
-msgid "Modem"
-msgstr "Modemo"
-
-#: harddrake/data.pm:293
-#, c-format
-msgid "ADSL adapters"
-msgstr ""
-
-#: harddrake/data.pm:307
-#, c-format
-msgid "Memory"
-msgstr "Memoro"
-
-#: harddrake/data.pm:316
-#, c-format
-msgid "AGP controllers"
-msgstr "AGP-kontroliloj"
-
-#: harddrake/data.pm:325 help.pm:186 help.pm:855
-#: install_steps_interactive.pm:979
-#, c-format
-msgid "Printer"
-msgstr "Printilo"
-
-#. -PO: these are joysticks controllers:
-#: harddrake/data.pm:339
-#, c-format
-msgid "Game port controllers"
-msgstr ""
-
-#: harddrake/data.pm:348
-#, c-format
-msgid "Joystick"
-msgstr "Ludbastono"
-
-#: harddrake/data.pm:358
-#, c-format
-msgid "SATA controllers"
-msgstr "SATA-kontroliloj"
-
-#: harddrake/data.pm:367
-#, c-format
-msgid "RAID controllers"
-msgstr "RAID-kontroliloj"
-
-#: harddrake/data.pm:376
-#, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA-kontroliloj"
-
-#: harddrake/data.pm:385
-#, c-format
-msgid "Firewire controllers"
-msgstr "Firewire-kontroliloj"
-
-#: harddrake/data.pm:394
-#, c-format
-msgid "PCMCIA controllers"
-msgstr "PCMCIA-kontroliloj"
-
-#: harddrake/data.pm:403
-#, c-format
-msgid "SCSI controllers"
-msgstr "SCSI-kontroliloj"
-
-#: harddrake/data.pm:412
-#, c-format
-msgid "USB controllers"
-msgstr "USB-kontroliloj"
-
-#: harddrake/data.pm:421
-#, fuzzy, c-format
-msgid "USB ports"
-msgstr ", USB-printilo"
-
-#: harddrake/data.pm:430
-#, c-format
-msgid "SMBus controllers"
-msgstr "SMBus-kontroliloj"
-
-#: harddrake/data.pm:439
-#, c-format
-msgid "Bridges and system controllers"
-msgstr "Pont- kaj sistem-kontroliloj"
-
-#: harddrake/data.pm:448 help.pm:855 install_steps_interactive.pm:118
-#: install_steps_interactive.pm:939 standalone/keyboarddrake:29
-#, c-format
-msgid "Keyboard"
-msgstr "Klavaro"
-
-#: harddrake/data.pm:461
-#, c-format
-msgid "Tablet and touchscreen"
-msgstr ""
-
-#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:972
-#, c-format
-msgid "Mouse"
-msgstr "Muso"
-
-#: harddrake/data.pm:483
-#, fuzzy, c-format
-msgid "UPS"
-msgstr "HFS"
-
-#: harddrake/data.pm:492
-#, c-format
-msgid "Scanner"
-msgstr "skanilo"
-
-#: harddrake/data.pm:502 standalone/harddrake2:440
-#, c-format
-msgid "Unknown/Others"
-msgstr "Nekonata/Aliaj"
-
-#: harddrake/data.pm:530
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
-
-#: harddrake/sound.pm:191 standalone/drakconnect:170
-#: standalone/drakconnect:648
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Bonvole atendu... Mi aplikas la konfiguraĵon"
-
-#: harddrake/sound.pm:227
-#, c-format
-msgid "No alternative driver"
-msgstr ""
-
-#: harddrake/sound.pm:228
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
-
-#: harddrake/sound.pm:234
-#, c-format
-msgid "Sound configuration"
-msgstr "Son-konfigurado"
-
-#: harddrake/sound.pm:236
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-
-#. -PO: here the first %s is either "OSS" or "ALSA", 
-#. -PO: the second %s is the name of the current driver
-#. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:241
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Via karto nun uzas la %s\"%s\"-pelilon (defaŭlta plelilo por via karto estas "
-"\"%s\")"
-
-#: harddrake/sound.pm:243
-#, fuzzy, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System - Libera Sonsistemo) estis la nuna son-API. Ĝi estas "
-"son-API "
-
-#: harddrake/sound.pm:257 harddrake/sound.pm:342 standalone/drakups:146
-#, c-format
-msgid "Driver:"
-msgstr "Pelilo:"
-
-#: harddrake/sound.pm:262
-#, c-format
-msgid "Trouble shooting"
-msgstr ""
-
-#: harddrake/sound.pm:270 keyboard.pm:391 lang.pm:1072
-#: network/ndiswrapper.pm:95 network/netconnect.pm:561
-#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
-#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
-#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
-#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
-#: printer/printerdrake.pm:4193 printer/printerdrake.pm:5314
-#: standalone/drakTermServ:326 standalone/drakTermServ:1136
-#: standalone/drakTermServ:1197 standalone/drakTermServ:1862
-#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
-#: standalone/drakclock:224 standalone/drakconnect:1007
-#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:477
-#: standalone/scannerdrake:51 standalone/scannerdrake:940
-#, c-format
-msgid "Warning"
-msgstr "Averto"
-
-#: harddrake/sound.pm:270
-#, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver will only be used on next bootstrap."
-msgstr ""
-
-#: harddrake/sound.pm:278
-#, c-format
-msgid "No open source driver"
-msgstr "Nenia liberfonta pelilo"
-
-#: harddrake/sound.pm:279
-#, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Ne ekzistas libera pelilo por via sonkarto (%s), sed ekzistas proprieta "
-"pelilo ĉe \"%s\"."
-
-#: harddrake/sound.pm:282
-#, c-format
-msgid "No known driver"
-msgstr "Nenia konata pelilo"
-
-#: harddrake/sound.pm:283
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Ne ekzistas konata pelilo por via sonkarto (%s)"
-
-#: harddrake/sound.pm:287
-#, c-format
-msgid "Unknown driver"
-msgstr "Nekonata pelilo"
-
-#: harddrake/sound.pm:288
-#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Eraro: La \"%s\"-pelilo por via sonkarto ne estas listigita"
-
-#: harddrake/sound.pm:302
-#, c-format
-msgid "Sound trouble shooting"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:305
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
-
-#: harddrake/sound.pm:331
-#, c-format
-msgid "Let me pick any driver"
-msgstr "Lasu min kapti ajnan pelilon"
-
-#: harddrake/sound.pm:334
-#, c-format
-msgid "Choosing an arbitrary driver"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:337
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Se vi vere pensas ke vi scias kiu pelilo ests la ĝusta por via karto,\n"
-"vi povas elekti ĝin el la supra listo.\n"
-"\n"
-"La nuna pelilo por via \"%s\"-sonkarto estas \"%s\"."
-
-#: harddrake/v4l.pm:14 standalone/net_applet:74 standalone/net_applet:75
-#: standalone/net_applet:77
-#, c-format
-msgid "Auto-detect"
-msgstr "Memdetekta"
-
-#: harddrake/v4l.pm:72 harddrake/v4l.pm:235
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Nekonata|Genera"
-
-#: harddrake/v4l.pm:105
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
-
-#: harddrake/v4l.pm:106
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
-
-#: harddrake/v4l.pm:309
-#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
-
-#: harddrake/v4l.pm:312
-#, c-format
-msgid "Card model:"
-msgstr "Model de la karto:"
-
-#: harddrake/v4l.pm:313
-#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Ŝanĝu subdiskspecon"
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
-
-#: harddrake/v4l.pm:314
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: harddrake/v4l.pm:316
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL-konfiguraĵo:"
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "Radio support:"
-msgstr ""
-
-#: harddrake/v4l.pm:317
-#, c-format
-msgid "enable radio support"
-msgstr ""
-
-#: help.pm:11
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandriva Linux distribution. If you agree with all the\n"
-"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
-"button will reboot your computer."
-msgstr ""
-
-#: help.pm:14 install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731 standalone/drakautoinst:216
-#, c-format
-msgid "Accept"
-msgstr "Akceptu"
-
-#: help.pm:17
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system which means each user can have his or her\n"
-"own preferences, own files and so on. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be "
-"authorized\n"
-"to change anything except their own files and their own configurations,\n"
-"protecting the system from unintentional or malicious changes which could\n"
-"impact on the system as a whole. You'll have to create at least one regular\n"
-"user for yourself -- this is the account which you should use for routine,\n"
-"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
-"anything and everything, it may also be very dangerous! A very simple\n"
-"mistake could mean that your system will not work any more. If you make a\n"
-"serious mistake as a regular user, the worst that can happen is that you'll\n"
-"lose some information, but you will not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you type in this field and copy it to the \"%s\" one, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the user name. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
-"by making it blank or too simple: after all, your files could be the ones\n"
-"at risk.\n"
-"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
-"finished adding users.\n"
-"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
-"\n"
-"When you're finished adding users, you'll be asked to choose a user who\n"
-"will be automatically logged into the system when the computer boots up. If\n"
-"you're interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click on\n"
-"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-
-#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
-#, c-format
-msgid "User name"
-msgstr "Salutnomo"
-
-#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:232
-#: install_steps_gtk.pm:693 interactive.pm:433 interactive/newt.pm:321
-#: network/netconnect.pm:335 network/tools.pm:191 printer/printerdrake.pm:3678
-#: standalone/drakTermServ:383 standalone/drakbackup:3938
-#: standalone/drakbackup:4032 standalone/drakbackup:4049
-#: standalone/drakbackup:4067 ugtk2.pm:506
-#, c-format
-msgid "Next"
-msgstr "Sekvanta"
-
-#: help.pm:54
-#, c-format
-msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-
-#: help.pm:85
-#, c-format
-msgid ""
-"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
-"selected package is located on another CD-ROM, DrakX will eject the current\n"
-"CD and ask you to insert the required one. If you do not have the requested\n"
-"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
-"installed."
-msgstr ""
-
-#: help.pm:92
-#, c-format
-msgid ""
-"It's now time to specify which programs you wish to install on your system.\n"
-"There are thousands of packages available for Mandriva Linux, and to make "
-"it\n"
-"simpler to manage, they have been placed into groups of similar\n"
-"applications.\n"
-"\n"
-"Mandriva Linux sorts package groups in four categories. You can mix and\n"
-"match applications from the various categories, so a ``Workstation''\n"
-"installation can still have applications from the ``Server'' category\n"
-"installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the groups in the workstation category.\n"
-"\n"
-" * \"%s\": if you plan on using your machine for programming, select the\n"
-"appropriate groups from that category. The special \"LSB\" group will\n"
-"configure your system so that it complies as much as possible with the\n"
-"Linux Standard Base specifications.\n"
-"\n"
-"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
-"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
-"of the system. However, if you do not select the \"LSB\" group you will\n"
-"still have a system which is nearly 100%% LSB-compliant.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you're familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you start the installation in \"%s\" mode, you can deselect all groups\n"
-"and prevent the installation of any new packages. This is useful for\n"
-"repairing or updating an existing system.\n"
-"\n"
-"If you deselect all groups when performing a regular installation (as\n"
-"opposed to an upgrade), a dialog will pop up suggesting different options\n"
-"for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command-line interface. The total size of this installation is about 65\n"
-"megabytes."
-msgstr ""
-
-#: help.pm:146 share/compssUsers.pl:23
-#, c-format
-msgid "Workstation"
-msgstr "Laborstacio"
-
-#: help.pm:146 share/compssUsers.pl:64 share/compssUsers.pl:162
-#: share/compssUsers.pl:164
-#, c-format
-msgid "Development"
-msgstr "Programado"
-
-#: help.pm:146 share/compssUsers.pl:144
-#, c-format
-msgid "Graphical Environment"
-msgstr ""
-
-#: help.pm:146 install_steps_gtk.pm:230 install_steps_interactive.pm:642
-#, c-format
-msgid "Individual package selection"
-msgstr "Elektado de individuaj pakaĵoj"
-
-#: help.pm:146 help.pm:588
-#, c-format
-msgid "Upgrade"
-msgstr "Aktualigo"
-
-#: help.pm:146 install_steps_interactive.pm:600
-#, c-format
-msgid "With X"
-msgstr "Kun X"
-
-#: help.pm:146
-#, fuzzy, c-format
-msgid "With basic documentation"
-msgstr "Kun baza dokumentaĵo (rekomendita!)"
-
-#: help.pm:146
-#, fuzzy, c-format
-msgid "Truly minimal install"
-msgstr "Minimuma instalado"
-
-#: help.pm:149
-#, c-format
-msgid ""
-"If you choose to install packages individually, the installer will present\n"
-"a tree containing all packages classified by groups and subgroups. While\n"
-"browsing the tree, you can select entire groups, subgroups, or individual\n"
-"packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description will appear on the\n"
-"right to let you know the purpose of that package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you'll be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandriva Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that\n"
-"security holes were discovered after this version of Mandriva Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do "
-"or\n"
-"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
-"the listed services and they will be started automatically at boot time. !!\n"
-"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages depend on others and the installation of\n"
-"one particular package may require the installation of another package. The\n"
-"installer can determine which packages are required to satisfy a dependency\n"
-"to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert the floppy disk created at the end of\n"
-"another installation. See the second tip of the last step on how to create\n"
-"such a floppy."
-msgstr ""
-
-#: help.pm:180
-#, c-format
-msgid "Automatic dependencies"
-msgstr ""
-
-#: help.pm:183
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to set up a new printer. The interface presented in our\n"
-"manual is similar to the one used during installation."
-msgstr ""
-
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:606
-#: standalone/drakbackup:2325 standalone/drakbackup:2329
-#: standalone/drakbackup:2333 standalone/drakbackup:2337
-#, c-format
-msgid "Configure"
-msgstr "Konfiguru"
-
-#: help.pm:189
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to select which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all services available on the current installation. Review\n"
-"each one of them carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you're not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you probably do not want to start any services which you do not "
-"need.\n"
-"Please remember that some services can be dangerous if they're enabled on a\n"
-"server. In general, select only those services you really need. !!"
-msgstr ""
-"Tiu ĉi dialogo uzeblas por elekti kiujn servojn vi deziras startigi kiam vi "
-"startigas\n"
-"vian komputilon.\n"
-"DrakX listigos ĉiujn servojn atingeblajn en la nuna instalaĵo.\n"
-"Kontrolu ĉiujn zorge kaj malelektu tiujn kiuj ne estas ĉiam bezonataj\n"
-"dum la starto.\n"
-"Kiam via muso estas supre de ero, malgranda balono\n"
-"ekaperas por helpi vin.  Ĝi priskribas la rolon de la servo.\n"
-"Tamen, se vi ne certas ĉu iu servo utilas aŭ ne, prefere lasu la defaŭltan "
-"sintenon.\n"
-"\n"
-"!!Zorgegu en ĉi tiu paŝo se vi intencas uzi vian komputilon kiel servilo:\n"
-"ne startu servojn kiujn vi ne bezonas. Memoru ke certaj servoj povas esti\n"
-"danĝeraj se ili estas aktivigitaj en servilo. Ĝenerale,\n"
-"elektu nur tiujn servojn kiujn vi vere bezonas.\n"
-"!!"
-
-#: help.pm:206
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same time zone. This is useful when the machine\n"
-"also hosts another operating system.\n"
-"\n"
-"The \"%s\" option will automatically regulate the system clock by\n"
-"connecting to a remote time server on the Internet. For this feature to\n"
-"work, you must have a working Internet connection. We recommend that you\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server which can be used by other machines on your local network as well."
-msgstr ""
-
-#: help.pm:217 install_steps_interactive.pm:874
-#, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Aparata horloĝo estas ĝustigita laŭ GMT"
-
-#: help.pm:217
-#, fuzzy, c-format
-msgid "Automatic time synchronization"
-msgstr "Auxtomata hor-sinkronizado (uzante NTP) "
-
-#: help.pm:220
-#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs."
-msgstr ""
-
-#: help.pm:231
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
-"\n"
-"You'll see a list of different parameters to change to get an optimal\n"
-"graphical display.\n"
-"\n"
-"Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If this is not correct, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the situation where different servers are available for your card,\n"
-"with or without 3D acceleration, you're asked to choose the server which\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   Depending on your hardware, this entry might not appear.\n"
-"\n"
-"   The system will try to open a graphical screen at the desired\n"
-"resolution. If you see the test message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you do not see it, then it\n"
-"means that some part of the auto-detected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds and return you to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:288
-#, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   Normally the installer will automatically detect and configure the\n"
-"monitor connected to your machine. If it is not correct, you can choose\n"
-"from this list the monitor which is connected to your computer."
-msgstr ""
-
-#: help.pm:295
-#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"graphics hardware. Choose the one which best suits your needs (you will be\n"
-"able to make changes after the installation). A sample of the chosen\n"
-"configuration is shown in the monitor picture."
-msgstr ""
-
-#: help.pm:303
-#, c-format
-msgid ""
-"In the situation where different servers are available for your card, with\n"
-"or without 3D acceleration, you're asked to choose the server which best\n"
-"suits your needs."
-msgstr ""
-
-#: help.pm:308
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   This steps allows you to choose whether you want your machine to\n"
-"automatically switch to a graphical interface at boot. Obviously, you may\n"
-"want to check \"%s\" if your machine is to act as a server, or if you were\n"
-"not successful in getting the display configured."
-msgstr ""
-
-#: help.pm:316
-#, c-format
-msgid ""
-"You now need to decide where you want to install the Mandriva Linux\n"
-"operating system on your hard drive. If your hard drive is empty or if an\n"
-"existing operating system is using all the available space you will have to\n"
-"partition the drive. Basically, partitioning a hard drive means to\n"
-"logically divide it to create the space needed to install your new\n"
-"Mandriva Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to data losses, partitioning can be intimidating and stressful\n"
-"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on the configuration of your hard drive, several options are\n"
-"available:\n"
-"\n"
-" * \"%s\". This option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
-"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
-"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
-"data, provided you've previously defragmented the Windows partition.\n"
-"Backing up your data is strongly recommended. Using this option is\n"
-"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
-"the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"than when you started. You'll have less free space under Microsoft Windows\n"
-"to store your data or to install new software.\n"
-"\n"
-" * \"%s\". If you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandriva Linux system, "
-"choose\n"
-"this option. Be careful, because you will not be able to undo this "
-"operation\n"
-"after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\". This option appears when the hard drive is entirely taken by\n"
-"Microsoft Windows. Choosing this option will simply erase everything on the\n"
-"drive and begin fresh, partitioning everything from scratch.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\". Choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
-msgstr ""
-
-#: help.pm:374 install_interactive.pm:95
-#, c-format
-msgid "Use free space"
-msgstr "Uzu liberan spacon"
-
-#: help.pm:374
-#, fuzzy, c-format
-msgid "Use existing partition"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: help.pm:374 install_interactive.pm:137
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Uzu la liberan spacon sur la Vindoza subdisko"
-
-#: help.pm:374 install_interactive.pm:213
-#, c-format
-msgid "Erase entire disk"
-msgstr "Forviŝu la tutan diskon"
-
-#: help.pm:374
-#, fuzzy, c-format
-msgid "Remove Windows"
-msgstr "Forigu Vindozon"
-
-#: help.pm:374 install_interactive.pm:228
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "subdiskigo"
-
-#: help.pm:377
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
-"to remove the installation media (CD-ROM or floppy). The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"boot-loader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": enables you to create an installation floppy disk which will\n"
-"automatically perform a whole installation without the help of an operator,\n"
-"similar to the installation you've just configured.\n"
-"\n"
-"   Note that two different options are available after clicking on that\n"
-"button:\n"
-"\n"
-"    * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing on a number of similar\n"
-"machines. See the Auto install section on our web site for more\n"
-"information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key, type >>linux\n"
-"defcfg=\"floppy\"<< and press the [Enter] key.\n"
-"\n"
-"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
-"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
-"/dev/fd0\"."
-msgstr ""
-
-#: help.pm:409
-#, fuzzy, c-format
-msgid "Generate auto-install floppy"
-msgstr "Kreu aŭtoinstalan disketon"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Replay"
-msgstr "Reludu"
-
-#: help.pm:409 install_steps_interactive.pm:1331
-#, c-format
-msgid "Automated"
-msgstr "Aŭtomata"
-
-#: help.pm:409 install_steps_interactive.pm:1334
-#, c-format
-msgid "Save packages selection"
-msgstr "Konservu la pakaĵ-elekton"
-
-#: help.pm:412
-#, c-format
-msgid ""
-"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
-"reformat some of them and erase any data they contain. To do so, please\n"
-"select those partitions as well.\n"
-"\n"
-"Please note that it's not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
-"reformat\n"
-"partitions containing data that you wish to keep (typically \"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After the formatting is\n"
-"completed, all data on the selected partitions will be deleted and you\n"
-"will not be able to recover it.\n"
-"\n"
-"Click on \"%s\" when you're ready to format the partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandriva Linux operating system installation.\n"
-"\n"
-"Click on \"%s\" if you wish to select partitions which will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-
-#: help.pm:431 install_steps_gtk.pm:387 interactive.pm:434
-#: interactive/newt.pm:318 printer/printerdrake.pm:3676
-#: standalone/drakTermServ:362 standalone/drakbackup:3898
-#: standalone/drakbackup:3937 standalone/drakbackup:4048
-#: standalone/drakbackup:4063 ugtk2.pm:504
-#, c-format
-msgid "Previous"
-msgstr "Antaŭa"
-
-#: help.pm:434
-#, c-format
-msgid ""
-"By the time you install Mandriva Linux, it's likely that some packages will\n"
-"have been updated since the initial release. Bugs may have been fixed,\n"
-"security issues resolved. To allow you to benefit from these updates,\n"
-"you're now able to download them from the Internet. Check \"%s\" if you\n"
-"have a working Internet connection, or \"%s\" if you prefer to install\n"
-"updated packages later.\n"
-"\n"
-"Choosing \"%s\" will display a list of web locations from which updates can\n"
-"be retrieved. You should choose one near to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
-msgstr ""
-
-#: help.pm:444 help.pm:588 install_steps_gtk.pm:386
-#: install_steps_interactive.pm:156 standalone/drakbackup:4095
-#, c-format
-msgid "Install"
-msgstr "Instalu"
-
-#: help.pm:447
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level you desire\n"
-"for your machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine is to contain crucial data, or if it's to be directly\n"
-"exposed to the Internet. The trade-off that a higher security level is\n"
-"generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option. You'll be able\n"
-"to change it later with the draksec tool, which is part of Mandriva Linux\n"
-"Control Center.\n"
-"\n"
-"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
-"security. Security messages will be sent to that address."
-msgstr ""
-
-#: help.pm:458
-#, fuzzy, c-format
-msgid "Security Administrator"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: help.pm:461
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandriva Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it does not always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": un-checking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
-#: help.pm:530
-#, fuzzy, c-format
-msgid "Removable media auto-mounting"
-msgstr "Aŭtomata kroĉado de demeteblaj aparatoj"
-
-#: help.pm:530
-#, fuzzy, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "Ŝanĝu al Normala reĝimo"
-
-#: help.pm:533
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one which you want to resize in order to install your new\n"
-"Mandriva Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-
-#: help.pm:564
-#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you're not in this country,\n"
-"click on the \"%s\" button and choose another. If your country is not in "
-"the\n"
-"list shown, click on the \"%s\" button to get the complete country list."
-msgstr ""
-
-#: help.pm:569
-#, c-format
-msgid ""
-"This step is activated only if an existing GNU/Linux partition has been\n"
-"found on your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new installation or an\n"
-"upgrade of an existing Mandriva Linux system:\n"
-"\n"
-" * \"%s\". For the most part, this completely wipes out the old system.\n"
-"However, depending on your partitioning scheme, you can prevent some of\n"
-"your existing data (notably \"home\" directories) from being over-written.\n"
-"If you wish to change how your hard drives are partitioned, or to change\n"
-"the file system, you should use this option.\n"
-"\n"
-" * \"%s\". This installation class allows you to update the packages\n"
-"currently installed on your Mandriva Linux system. Your current "
-"partitioning\n"
-"scheme and user data will not be altered. Most of the other configuration\n"
-"steps remain available and are similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
-"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
-"to Mandriva Linux version \"8.1\" is not recommended."
-msgstr ""
-
-#: help.pm:591
-#, c-format
-msgid ""
-"Depending on the language you chose (), DrakX will automatically select a\n"
-"particular type of keyboard configuration. Check that the selection suits\n"
-"you or choose another keyboard layout.\n"
-"\n"
-"Also, you may not have a keyboard which corresponds exactly to your\n"
-"language: for example, if you are an English-speaking Swiss native, you may\n"
-"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
-"you may find yourself in the same situation where your native language and\n"
-"country-set keyboard do not match. In either case, this installation step\n"
-"will allow you to select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding which will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-
-#: help.pm:609
-#, c-format
-msgid ""
-"The first step is to choose your preferred language.\n"
-"\n"
-"Your choice of preferred language will affect the installer, the\n"
-"documentation, and the system in general. First select the region you're\n"
-"located in, then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if Spanish\n"
-"users are to use your machine, select English as the default language in\n"
-"the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
-"cover all existing languages. However full support for it in GNU/Linux is\n"
-"still under development. For that reason, Mandriva Linux's use of UTF-8 "
-"will\n"
-"depend on the user's choices:\n"
-"\n"
-" * If you choose a language with a strong legacy encoding (latin1\n"
-"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
-"iso-8859-2 languages), the legacy encoding will be used by default;\n"
-"\n"
-" * Other languages will use unicode by default;\n"
-"\n"
-" * If two or more languages are required, and those languages are not using\n"
-"the same encoding, then unicode will be used for the whole system;\n"
-"\n"
-" * Finally, unicode can also be forced for use throughout the system at a\n"
-"user's request by selecting the \"%s\" option independently of which\n"
-"languages were been chosen.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several, or even install them all by selecting the \"%s\" box.\n"
-"Selecting support for a language means translations, fonts, spell checkers,\n"
-"etc. will also be installed for that language.\n"
-"\n"
-"To switch between the various languages installed on your system, you can\n"
-"launch the \"localedrake\" command as \"root\" to change the language used\n"
-"by the entire system. Running the command as a regular user will only\n"
-"change the language settings for that particular user."
-msgstr ""
-
-#: help.pm:647
-#, c-format
-msgid "Espanol"
-msgstr ""
-
-#: help.pm:650
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be obtained by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
-"mouse. DrakX will then configure your mouse so that you can simulate the\n"
-"wheel with it: to do so, press the middle button and move your mouse\n"
-"pointer up and down.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
-"will work with nearly all mice.\n"
-"\n"
-"If you choose a mouse other than the default one, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and\n"
-"you will be returned to the mouse list.\n"
-"\n"
-"Occasionally wheel mice are not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
-"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
-"Test the buttons and check that the mouse pointer moves on-screen as you\n"
-"move your mouse about."
-msgstr ""
-
-#: help.pm:681
-#, fuzzy, c-format
-msgid "with Wheel emulation"
-msgstr "Loĝiteka MouseMan"
-
-#: help.pm:681
-#, c-format
-msgid "Universal | Any PS/2 & USB mice"
-msgstr ""
-
-#: help.pm:684
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Bonvolu elekti la ĝustan pordon. Ekzemple, la \"COM1\"-a\n"
-"pordo sub MS Vindozo estas nomata \"ttyS0\" sub GNU/Linukso."
-
-#: help.pm:688
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you must enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That's why you must choose a password which is difficult to\n"
-"guess: DrakX will tell you if the password you chose is too simple. As you\n"
-"can see, you're not forced to enter a password, but we strongly advise\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise your system.\n"
-"\n"
-"One caveat: do not make the password too long or too complicated because "
-"you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it. To reduce the\n"
-"chance of a blind typing error you'll need to enter the password twice. If\n"
-"you do happen to make the same typing error twice, you'll have to use this\n"
-"``incorrect'' password the first time you'll try to connect as \"root\".\n"
-"\n"
-"If you want an authentication server to control access to your computer,\n"
-"click on the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, or if your\n"
-"computer will never be connected to the Internet and you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
-msgstr ""
-
-#: help.pm:722
-#, fuzzy, c-format
-msgid "authentication"
-msgstr "Aŭtentikigado"
-
-#: help.pm:725
-#, fuzzy, c-format
-msgid ""
-"A boot loader is a little program which is started by the computer at boot\n"
-"time. It's responsible for starting up the whole system. Normally, the boot\n"
-"loader installation is totally automated. DrakX will analyze the disk boot\n"
-"sector and act according to what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
-"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
-"OS installed on your machine.\n"
-"\n"
-" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
-"\n"
-"If DrakX can not determine where to place the boot sector, it'll ask you\n"
-"where it should place it. Generally, the \"%s\" is the safest place.\n"
-"Choosing \"%s\" will not install any boot loader. Use this option only if "
-"you\n"
-"know what you're doing."
-msgstr ""
-"LILO kaj grub estas GNU/Linuksaj startigiloj. Normale, tiu paŝo estas "
-"komplete\n"
-"aŭtomata. DrakX analizos la startsektoron de la disko kaj agas laŭ tio\n"
-"kion ĝi trovas tie:\n"
-"\n"
-" *  se ĝi trovas vindozan startsektoron, ĝi anstataŭigos tiun per grub/LILO-"
-"a startsektoro.\n"
-"Tiel vi povos ŝargi aŭ GNU/Linukson aŭ alian mastrumsistemon.\n"
-"\n"
-" *  se ĝi trovas grub- aŭ LILO-startsektoron, ĝi anstataŭigos tiun per "
-"nova.\n"
-"\n"
-" *  se ĝi ne povas determini, DrakX demandos vin kien ĝi metu la\n"
-"startigilon.\n"
-"\n"
-"\"Boot device\": En plej multaj okazoj, vi ne ŝanĝu la defaŭltan (\"Unua\n"
-"sektoro de la disko (MBR)\"), sed se vi preferas, la startigilo povas esti\n"
-"instalata sur la dua fiksdisko (\"/dev/hdb\"), aŭ eĉ sur disketo\n"
-"(\"Sur disketo\")."
-
-#: help.pm:742
-#, fuzzy, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other\n"
-"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
-"the printing systems is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"within networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
-"choice for printing to your local printer or to one halfway around the\n"
-"planet. It's simple to configure and can act as a server or a client for\n"
-"the ancient \"lpd\" printing system, so it's compatible with older\n"
-"operating systems which may still need print services. While quite\n"
-"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
-"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
-"\"%s\" includes graphical front-ends for printing or choosing printer\n"
-"options and for managing the printer.\n"
-"\n"
-"If you make a choice now, and later find that you do not like your printing\n"
-"system you may change it by running PrinterDrake from the Mandriva Linux\n"
-"Control Center and clicking on the \"%s\" button."
-msgstr ""
-"Nun estas tempo por elekti pressistemon por via komputilo. Aliaj mastrum-"
-"sistemoj\n"
-"proponas al vi unu, sed Mandriva Linukso proponas du. Ĉiu el la "
-"pressistemoj\n"
-"plej taŭgas por aparta tipo de konfigurado.\n"
-"\n"
-" * \"pdq\" -- kio estas akronimo por \"print, do not queue\" (presu, ne "
-"vicigu), elektindas\n"
-"se vi havas rektan konekton kun via presilo, vi ŝatus eskapi el problemoj "
-"kun\n"
-"aliaj presiloj, kaj vi ne havas retajn presilojn. (\"pdq\"\n"
-"pritraktos nur tre simplajn retokazojn kaj estas iom malrapida se\n"
-"uzata kun retoj.) Konsilindas uzi \"pdq\" se tio ĉi estas via\n"
-"unua sperto kun GNU/Linukso.\n"
-"\n"
-" * \"%s\" - \"Common Unix Printing System\", estas bonega elekto por\n"
-"presigi vian lokan presilon aŭ iun ie tra la planedo. Ĝi estas\n"
-"facile konfigurebla kaj povas agi kiel servilo aŭ kiel kliento por la "
-"antaŭa\n"
-"\"lpd \" pressistemo, kaj estas kongrua kun pli malnovaj mastrum-sistemoj\n"
-"kiuj eble ankoraŭ bezonas presservojn. Kvankam tre potenca, la baza "
-"konfigurado\n"
-"estas preskaŭ same simpla kiel \"pdq\". Se vi bezonas imiti \"lpd\"-"
-"servilon,\n"
-"certiĝu ke vi aktivigis la \"cups-lpd\"-demonon. \"%s\" enhavas grafikajn\n"
-"'front-ends' por presi aŭ por elekti presil-opciojn kaj por mastrumi\n"
-"la presilon.\n"
-"\n"
-"Se vi faras vian elekton nun, kaj poste trovas ke vi ne ŝatas vian "
-"pressistemon,\n"
-"vi povas ŝanĝi ĝin rulante PrinterDrake ekde la Mandriva KontrolCentro kaj\n"
-"alklaki la eksperto-butonon."
-
-#: help.pm:765
-#, c-format
-msgid "pdq"
-msgstr ""
-
-#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
-#, c-format
-msgid "CUPS"
-msgstr ""
-
-#: help.pm:765
-#, c-format
-msgid "Expert"
-msgstr "Spertulo"
-
-#: help.pm:768
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX unue detektos iujn IDE-aparatojn en via komputilo. Ĝi ankaŭ\n"
-"serĉas unu aŭ plurajn PCI-SCSI-kartojn en via sistemo. Se SCSI-karto\n"
-"estas trovita, DrakX aŭtomate instalos la taŭgan pelilon.\n"
-"\n"
-"Ĉar detektado de aparataro ne estas absolute senerara, DrakX povas\n"
-"malsukcesi detektante viajn fiksdiskojn. Se tiel, vi devos mem mane entajpi\n"
-"vian aparataron.\n"
-"\n"
-"Se vi devis mane entajpi vian PCI-SCSI-adaptilon, DrakX demandos ĉu vi\n"
-"deziras konfiguri opciojn por ĝi. Prefere permesu al DrakX provi la "
-"aparatojn\n"
-"por la kartospecifaj opcioj kiuj estas bezonataj por inici la adaptilon. "
-"Plej ofte,\n"
-"DrakX trairos tiun paŝon sen ajna problemo.\n"
-"\n"
-"Se DrakX ne kapablas provi kiujn parametrojn la opcioj aŭtomate devas doni "
-"al la\n"
-"aparatoj, vi devos mane konfiguri la pelilon."
-
-#: help.pm:786
-#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver."
-msgstr ""
-
-#: help.pm:788 help.pm:855 install_steps_interactive.pm:1006
-#: install_steps_interactive.pm:1023
-#, c-format
-msgid "Sound card"
-msgstr "Sonkarto"
-
-#: help.pm:791
-#, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has gathered\n"
-"about your system. Depending on the hardware installed on your machine, you\n"
-"may have some or all of the following entries. Each entry is made up of the\n"
-"hardware item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"%s\" button to make the change.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change it if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you're not in this\n"
-"country, click on the \"%s\" button and choose another. If your country\n"
-"is not in the list shown, click on the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": verify the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to set up a new printer. The interface\n"
-"presented in our manual is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
-"here. If you notice the sound card is not the one actually present on your\n"
-"system, you can click on the button and choose a different driver.\n"
-"\n"
-" * \"%s\": if you have a TV card, this is where information about its\n"
-"configuration will be displayed. If you have a TV card and it is not\n"
-"detected, click on \"%s\" to try to configure it manually.\n"
-"\n"
-" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
-"the card if you feel the configuration is wrong.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if you wish to configure your Internet or local network access,\n"
-"you can do so now. Refer to the printed documentation or use the\n"
-"Mandriva Linux Control Center after the installation has finished to "
-"benefit\n"
-"from full in-line help.\n"
-"\n"
-" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
-"you're installing on is to be located behind a proxy server.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click this\n"
-"button. This should be reserved to advanced users. Refer to the printed\n"
-"documentation or the in-line help about bootloader configuration in the\n"
-"Mandriva Linux Control Center.\n"
-"\n"
-" * \"%s\": through this entry you can fine tune which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
-msgstr ""
-
-#: help.pm:855 install_steps_interactive.pm:965 standalone/drakclock:100
-#, c-format
-msgid "Timezone"
-msgstr "Horzono"
-
-#: help.pm:855 install_steps_interactive.pm:1039
-#, c-format
-msgid "TV card"
-msgstr "TV-karto"
-
-#: help.pm:855
-#, fuzzy, c-format
-msgid "ISDN card"
-msgstr "Interna ISDN-karto"
-
-#: help.pm:855
-#, fuzzy, c-format
-msgid "Graphical Interface"
-msgstr "Grafika interfaco"
-
-#: help.pm:855 install_any.pm:1662 install_steps_interactive.pm:1057
-#: standalone/drakbackup:2019
-#, c-format
-msgid "Network"
-msgstr "Reto"
-
-#: help.pm:855 install_steps_interactive.pm:1072
-#, c-format
-msgid "Proxies"
-msgstr "Prokuraj Serviloj"
-
-#: help.pm:855 install_steps_interactive.pm:1083
-#, c-format
-msgid "Security Level"
-msgstr "sekurnivelo"
-
-#: help.pm:855 install_steps_interactive.pm:1097
-#, c-format
-msgid "Firewall"
-msgstr "Fajromuro (Firewall)"
-
-#: help.pm:855 install_steps_interactive.pm:1113
-#, c-format
-msgid "Bootloader"
-msgstr "Startŝargilo"
-
-#: help.pm:855 install_steps_interactive.pm:1126 services.pm:193
-#, c-format
-msgid "Services"
-msgstr "Servoj"
-
-#: help.pm:858
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-
-#: help.pm:863
-#, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to quit this operation without losing data and partitions\n"
-"present on this hard drive."
-msgstr ""
-
-#: help.pm:869
-#, c-format
-msgid "Next ->"
-msgstr "Sekvanta ->"
-
-#: help.pm:869
-#, c-format
-msgid "<- Previous"
-msgstr "<- Antaŭa"
-
-#: install2.pm:117
-#, c-format
-msgid ""
-"Can not access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-
-#: install2.pm:169
-#, c-format
-msgid "You must also format %s"
-msgstr ""
-
-#: install_any.pm:406
-#, fuzzy, c-format
-msgid "Do you have further supplementary media?"
-msgstr "Ĉu vi havas alian?"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:409
-#, fuzzy, c-format
-msgid ""
-"The following media have been found and will be used during install: %s.\n"
-"\n"
-"\n"
-"Do you have a supplementary installation media to configure?"
-msgstr "Ĉu vi havas iun %s interfacon?"
-
-#: install_any.pm:422 printer/printerdrake.pm:3022
-#: printer/printerdrake.pm:3029 standalone/scannerdrake:182
-#: standalone/scannerdrake:190 standalone/scannerdrake:241
-#: standalone/scannerdrake:248
-#, c-format
-msgid "CD-ROM"
-msgstr "KD-ROMo"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (http)"
-msgstr "Reto %s"
-
-#: install_any.pm:422
-#, fuzzy, c-format
-msgid "Network (ftp)"
-msgstr "Reto %s"
-
-#: install_any.pm:451
-#, c-format
-msgid "Insert the CD 1 again"
-msgstr ""
-
-#: install_any.pm:479 standalone/drakbackup:112
-#, fuzzy, c-format
-msgid "No device found"
-msgstr "Loka printilo"
-
-#: install_any.pm:484
-#, c-format
-msgid "Insert the CD"
-msgstr ""
-
-#: install_any.pm:489
-#, fuzzy, c-format
-msgid "Unable to mount CD-ROM"
-msgstr "Ne povis forki: %s"
-
-#: install_any.pm:521 install_any.pm:525
-#, c-format
-msgid "URL of the mirror?"
-msgstr ""
-
-#: install_any.pm:558
-#, fuzzy, c-format
-msgid ""
-"Can't find a package list file on this mirror. Make sure the location is "
-"correct."
-msgstr "Ne povis malfermi %s por skribi: %s\n"
-
-#: install_any.pm:725
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done."
-msgstr ""
-"Ŝanĝu vian KDROM!\n"
-"\n"
-"Bonvole, enŝovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\" kiam vi finos."
-
-#: install_any.pm:738
-#, fuzzy, c-format
-msgid "Copying in progress"
-msgstr "Duobla surmetingo %s"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:878
-#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They do not have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_any.pm:901
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-
-#: install_any.pm:1349 partition_table.pm:603
-#, c-format
-msgid "Error reading file %s"
-msgstr "Eraro legante dosiero %s"
-
-#: install_any.pm:1559
-#, fuzzy, c-format
-msgid "The following disk(s) were renamed:"
-msgstr "La sekvaj pakaĵoj estos instalataj"
-
-#: install_any.pm:1561
-#, c-format
-msgid "%s (previously named as %s)"
-msgstr ""
-
-#: install_any.pm:1599
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Eraro okazis - neniuj validaj aparatoj estis trovata sur kiuj vi povas krei "
-"novajn dosiersistemojn.  Bonvolu kontroli vian ekipaĵon por la kaŭzo de ĉi "
-"tiu problemo."
-
-#: install_any.pm:1643
-#, c-format
-msgid "HTTP"
-msgstr ""
-
-#: install_any.pm:1643
-#, c-format
-msgid "FTP"
-msgstr "FTP"
-
-#: install_any.pm:1643
-#, fuzzy, c-format
-msgid "NFS"
-msgstr "HFS"
-
-#: install_any.pm:1666
-#, fuzzy, c-format
-msgid "Please choose a media"
-msgstr "Bonvole elektu"
-
-#: install_any.pm:1698
-#, fuzzy, c-format
-msgid "Bad media %s"
-msgstr "aldonita datenportilo %s"
-
-#: install_any.pm:1710
-#, fuzzy, c-format
-msgid "File already exists. Overwrite it?"
-msgstr "Dosiero jam ekzistas.  Ĉu vi deziras uzi ĝin?"
-
-#: install_any.pm:1761
-#, c-format
-msgid "Can not make screenshots before partitioning"
-msgstr "Mi ne povas fari ekranfotojn antaŭ ol fari subdiskojn"
-
-#: install_any.pm:1768
-#, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Ekranfotoj haveblos post instalado en %s"
-
-#: install_gtk.pm:136
-#, c-format
-msgid "System installation"
-msgstr "Sistem-nstalado"
-
-#: install_gtk.pm:139
-#, c-format
-msgid "System configuration"
-msgstr "Sistem-konfigurado"
-
-#: install_interactive.pm:22
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Iuj aparatoj sur via komputilo bezonas \"proprietajn\" pelilojn por "
-"funkcii.\n"
-"Vi povas trovi iun informon pri ili ĉe: %s"
-
-#: install_interactive.pm:62
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Vi devas havi radikan subdiskon.\n"
-"Por ĉi tiu, kreu subdiskon (aŭ klaku estantan).\n"
-"Sekve elektu la agon \"Surmetingo\" kaj faru ĝin '/'"
-
-#: install_interactive.pm:67
-#, c-format
-msgid ""
-"You do not have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"Vi ne havas interŝanĝan subdiskon\n"
-"\n"
-"Ĉu vi deziras daŭri tamen?"
-
-#: install_interactive.pm:70 install_steps.pm:211
-#, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Vi devas havi FAT-subdiskon en /boot/efi"
-
-#: install_interactive.pm:97
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Mankas sufiĉan da libera spaco por disponigi novajn subdiskojn"
-
-#: install_interactive.pm:105
-#, c-format
-msgid "Use existing partitions"
-msgstr "Uzu ekzistantajn subdiskojn"
-
-#: install_interactive.pm:107
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Ne ekzistas subdiskojn por uzi"
-
-#: install_interactive.pm:114
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Uzu la Vindoza subdiskon por retrokonektado"
-
-#: install_interactive.pm:117
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Kiun subdiskon vi deziras uzi por Linux4Win?"
-
-#: install_interactive.pm:119
-#, c-format
-msgid "Choose the sizes"
-msgstr "Elektu la grandecojn"
-
-#: install_interactive.pm:120
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Radikosubdiska grandeco en MB: "
-
-#: install_interactive.pm:121
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Interŝanĝa subdiska grandeco en MB: "
-
-#: install_interactive.pm:130
-#, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Ne ekzistas FAT-a subdiskoj por regrandecigi\n"
-"aŭ uzi kiel retrokonektaj subdiskoj (aŭ ne estas sufiĉa da spaco)spaco)"
-
-#: install_interactive.pm:139
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Kiun subdiskon vi deziras regrandecigi?"
-
-#: install_interactive.pm:153
-#, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occurred: %s"
-msgstr ""
-"La regrandecigilo por la FAT (Dosiero-Atingo-Tablo) ne povas trakti\n"
-"vian subdiskon, la sekvanta eraro okazis: %s"
-
-#: install_interactive.pm:156
-#, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Kalkulante la liberan spacon sur la Vindoza subdisko"
-
-#: install_interactive.pm:163
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
-"installation."
-msgstr ""
-"Via Vindoza subdisko estas tro fragmentigata, bonvole uzu ``defrag'' antaŭe"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_interactive.pm:166
-#, fuzzy, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"AVERTO!\n"
-"\n"
-"DrakX nun regrandecigos vian Vindozan subdiskon.  Zorgu:\n"
-"ĉi tiu operacio estas danĝera.  Se vi ne jam faris ĝin,\n"
-"vi prefere antaŭe eliru el la instalado, uzu\n"
-"\"scandisk\" sub Vindozo (kaj laŭvole rulu \"defrag\"), kaj sekve relanĉu "
-"la\n"
-"instaladon. Vi prefere faru ankaŭ rezervan kopion de via datenoj.\n"
-"Kiam vi estos certa, klaku \"Jeso\"."
-
-#: install_interactive.pm:178
-#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Kiun grandecon vi deziras teni por Vindozo?"
-
-#: install_interactive.pm:179
-#, c-format
-msgid "partition %s"
-msgstr "subdisko: %s"
-
-#: install_interactive.pm:188
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
-
-#: install_interactive.pm:193
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Regrandeciĝo de FAT malsukcesis: %s"
-
-#: install_interactive.pm:208
-#, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr ""
-"Ne ekzistas FAT-a subdisko por regrandecigi\n"
-"(aŭ ne estas sufiĉe da spaco)"
-
-#: install_interactive.pm:213
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "Forigu Vindozon"
-
-#: install_interactive.pm:215
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Vi havas pli ol unu fiksdisko, sur kiu vi deziras instali Linukson?"
-
-#: install_interactive.pm:219
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"Ĉiuj ekzistantaj subdiskoj kaj iliaj datenoj estos perdata sur drajvo %s"
-
-#: install_interactive.pm:232
-#, c-format
-msgid "Use fdisk"
-msgstr "Uzu fdisk"
-
-#: install_interactive.pm:235
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, do not forget to save using `w'"
-msgstr ""
-"Nun vi povas dispartigi %s.\n"
-"Kiam vi finiĝos, ne forgesu savi kun `w'."
-
-#: install_interactive.pm:271
-#, c-format
-msgid "I can not find any room for installing"
-msgstr "Mi ne trovas spacon por instali"
-
-#: install_interactive.pm:275
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "La Dispartigsorĉilo de DrakX trovis ĉi tiujn solvojn:"
-
-#: install_interactive.pm:281
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Dispartigado malsukcesis: %s"
-
-#: install_interactive.pm:288
-#, c-format
-msgid "Bringing up the network"
-msgstr "Startado de la reto"
-
-#: install_interactive.pm:293
-#, c-format
-msgid "Bringing down the network"
-msgstr "Haltas de la reto"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:10
-#, fuzzy, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandriva "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandriva Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"Mandriva S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
-"be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if Mandriva S.A. has been advised of the possibility or "
-"occurrence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
-"no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandriva Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to Mandriva.\n"
-"The programs developed by Mandriva S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by Mandriva S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
-"as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
-"Mandriva S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A.  \n"
-msgstr ""
-"Enkonduko\n"
-"\n"
-"La mastrum-sistemo kaj la diversaj komponantoj atingeblaj en la Mandriva "
-"Linuks-eldono\n"
-"estu en la sekvo nomataj la \"softvarproduktoj\". La softvarproduktoj "
-"inkluzivigas la tutaĵon de programoj, metodoj, reguloj kaj dokumentado "
-"koncerne la mastruman sistemon,\n"
-"kaj la diversajnf komponantojn de la Mandriva Linuks-eldono, sed\n"
-"ne estas limigitaj al ili.\n"
-"\n"
-"\n"
-"1. Licenckonsento \n"
-"Bonvole legu tiun ĉi dokumenton zorge. Tiu ĉi dokumento estas licenckonsento "
-"inter vi kaj\n"
-"Mandriva S.A. kiu aplikiĝas al la softvarproduktoj.\n"
-"Per instalado, duobligado aŭ uzado de la softvarproduktoj en ajna maniero, "
-"vi eksplicite\n"
-"akceptas kaj plene konsentas agi konforme al la teksto kaj kondiĉoj de tiu "
-"ĉi licenco.\n"
-"Se vi malsamopinias kun iu ajn parto de la licenco, vi ne rajtas instali, "
-"duobligi aŭ uzi\n"
-"la softvarproduktojn.\n"
-"Iu ajn provo instali, duobligi aŭ uzi la softvarproduktojn en maniero kiu ne "
-"kongruas kun la teksto kaj kondiĉoj de tiu ĉi licenco estas\n"
-
-#: install_messages.pm:90
-#, c-format
-msgid ""
-"Warning: Free Software may not necessarily be patent free, and some Free\n"
-"Software included may be covered by patents in your country. For example, "
-"the\n"
-"MP3 decoders included may require a licence for further usage (see\n"
-"http://www.mp3licensing.com for more details). If you are unsure if a "
-"patent\n"
-"may be applicable to you, check your local laws."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:98
-#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Averto\n"
-"Bonvolu zorge legi la suban tekston. Se vi malsamopinias kun iu\n"
-"parto, vi ne rajtas instali la venontan KD-enhavon. Premu 'Rifuzas'\n"
-"por daŭrigi la instaladon sen uzi tiun KD-enhavon.\n"
-"\n"
-"\n"
-"Iuj komponantoj entenataj en la venonta KD ne estas regataj\n"
-"de la GPL-licenco aŭ similaj interkonsentoj. Ĉiu tia komponanto estas\n"
-"tiam regata de la teksto kaj kondiĉoj de ĝia propra specifa licenco.\n"
-"Bonvolu zorge legi tiajn specifajn licencojn kaj agi laŭ ili antaŭ\n"
-"ol uzi aŭ redisdoni la nomitajn komponantojn.\n"
-"Tiaj licencoj ĝenerale malhelpas transdonon, duobligon\n"
-"(escepte por savkopioj), redistribuadon, 'reverse engineering',\n"
-"malmuntadon, malkompiladon aŭ modifadon de la komponento.\n"
-"Ĉia rompo de la konsento tuj ĉesigos viajn rajtojn sub\n"
-"la respektiva licenco. Escepte se la specifa licenco donas al vi tiajn\n"
-"rajtojn, vi kutime ne povas instali la programojn sur pli ol unu\n"
-"sistemo, aŭ adapti ĝin por uzi ĝin en reto. En duba kazo bonvole kontaktu\n"
-"rekte la disdoninton aŭ la eldoninton de la komponanto.\n"
-"Transdonado al triaj partoj aŭ kopiado de tiaj komponantoj inkluzive de la \n"
-"dokumentaĵo normale estas malpermesita.\n"
-"\n"
-"\n"
-"Ĉiuj rajtoj pri la komponantoj de la venonta KD apartenas al ties\n"
-"respektivaj aŭtoroj kaj estas protektataj de leĝoj pri intelekta propraĵo "
-"kaj\n"
-"kopirajto aplikeblaj al softvaraj programoj.\n"
-
-#: install_messages.pm:131
-#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandriva "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandriva Linux User's Guide."
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: install_messages.pm:144
-#, c-format
-msgid "http://www.mandrivalinux.com/en/errata.php3"
-msgstr "http://www.mandrivalinux.com/en/errata.php3"
-
-#: install_steps.pm:246
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duobla surmetingo %s"
-
-#: install_steps.pm:479
-#, c-format
-msgid ""
-"Some important packages did not get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
-"\"\n"
-msgstr ""
-"Iuj gravaj pakaĵoj ne estis taŭge instalata.\n"
-"Aŭ via KDROM drajvo aŭ via KDROM disko estas difektita.\n"
-"Kontrolu la KDROM sur instalata komputilo per\n"
-"\"rpm -qpl media/main/*.rpm\"\n"
-
-#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Eniras paŝon `%s'\n"
-
-#: install_steps_gtk.pm:176
-#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrivalinux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-
-#: install_steps_gtk.pm:223 install_steps_interactive.pm:624
-#, c-format
-msgid "Package Group Selection"
-msgstr "Elektado de Pakaĵaj Grupoj"
-
-#: install_steps_gtk.pm:249 install_steps_interactive.pm:567
-#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Tuta grandeco: %d / %d MB"
-
-#: install_steps_gtk.pm:294
-#, c-format
-msgid "Bad package"
-msgstr "Malbona pakaĵo"
-
-#: install_steps_gtk.pm:296
-#, c-format
-msgid "Version: "
-msgstr "Versio: "
-
-#: install_steps_gtk.pm:297
-#, c-format
-msgid "Size: "
-msgstr "Grandeco: "
-
-#: install_steps_gtk.pm:297
-#, fuzzy, c-format
-msgid "%d KB\n"
-msgstr "Grandeco: %d KB\n"
-
-#: install_steps_gtk.pm:298
-#, c-format
-msgid "Importance: "
-msgstr "Graveco: "
-
-#: install_steps_gtk.pm:331
-#, c-format
-msgid "You can not select/unselect this package"
-msgstr "Vi ne povas elektu/malelektu ĉi tiun pakaĵon"
-
-#: install_steps_gtk.pm:335
-#, c-format
-msgid "due to missing %s"
-msgstr "pro mankanta %s"
-
-#: install_steps_gtk.pm:336
-#, c-format
-msgid "due to unsatisfied %s"
-msgstr "pro neplenumita %s"
-
-#: install_steps_gtk.pm:337
-#, c-format
-msgid "trying to promote %s"
-msgstr "mi provas disponigi %s"
-
-#: install_steps_gtk.pm:338
-#, c-format
-msgid "in order to keep %s"
-msgstr "por konservi %s"
-
-#: install_steps_gtk.pm:343
-#, c-format
-msgid ""
-"You can not select this package as there is not enough space left to install "
-"it"
-msgstr ""
-"Vi ne povas elekti ĉi tiun pakaĵon ĉar ne estas sufiĉe da spaco por instali\n"
-"ĝin."
-
-#: install_steps_gtk.pm:346
-#, c-format
-msgid "The following packages are going to be installed"
-msgstr "La sekvaj pakaĵoj estos instalataj"
-
-#: install_steps_gtk.pm:347
-#, c-format
-msgid "The following packages are going to be removed"
-msgstr "La sekvaj pakaĵoj estos malinstalataj"
-
-#: install_steps_gtk.pm:371
-#, c-format
-msgid "This is a mandatory package, it can not be unselected"
-msgstr "Ĉi tiu estas deviga pakaĵo, vi ne povas malelekti ĝin"
-
-#: install_steps_gtk.pm:373
-#, c-format
-msgid "You can not unselect this package. It is already installed"
-msgstr "Vi ne povas malelekti ĉi tiun pakaĵon.  Ĝi estas jam instalita."
-
-#: install_steps_gtk.pm:376
-#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
-msgstr ""
-"Ĉi tiu pakaĵo devus esti promociata.\n"
-"Ĉu vi certas ke vi deziras malelekti ĝin?"
-
-#: install_steps_gtk.pm:379
-#, c-format
-msgid "You can not unselect this package. It must be upgraded"
-msgstr "Vi ne povas malelekti ĉi tiun pakaĵon.  Ĝi devus esti promociata."
-
-#: install_steps_gtk.pm:384
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Montru aŭtomate elektitajn pakaĵojn"
-
-#: install_steps_gtk.pm:389
-#, fuzzy, c-format
-msgid "Load/Save selection"
-msgstr "Elektado de Pakaĵoj"
-
-#: install_steps_gtk.pm:390
-#, c-format
-msgid "Updating package selection"
-msgstr "Ĝisdatigo de pakaĵ-elekto"
-
-#: install_steps_gtk.pm:395
-#, c-format
-msgid "Minimal install"
-msgstr "Minimuma instalado"
-
-#: install_steps_gtk.pm:409 install_steps_interactive.pm:483
-#, c-format
-msgid "Choose the packages you want to install"
-msgstr "Elektu la pakaĵojn kiuj vi deziras instali"
-
-#: install_steps_gtk.pm:425 install_steps_interactive.pm:706
-#, c-format
-msgid "Installing"
-msgstr "Instalanta"
-
-#: install_steps_gtk.pm:432
-#, c-format
-msgid "Estimating"
-msgstr "Taksas"
-
-#: install_steps_gtk.pm:481
-#, c-format
-msgid "No details"
-msgstr "Neniaj detaloj"
-
-#: install_steps_gtk.pm:489
-#, c-format
-msgid "Time remaining "
-msgstr "Tempo restanta "
-
-#: install_steps_gtk.pm:496
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Bonvole atenduj, mi preparas instaladon..."
-
-#: install_steps_gtk.pm:511
-#, c-format
-msgid "%d packages"
-msgstr "%d pakaĵoj"
-
-#: install_steps_gtk.pm:516
-#, c-format
-msgid "Installing package %s"
-msgstr "Instalanta pakaĵo %s"
-
-#: install_steps_gtk.pm:551 install_steps_interactive.pm:92
-#: install_steps_interactive.pm:731
-#, c-format
-msgid "Refuse"
-msgstr "Malakceptu"
-
-#: install_steps_gtk.pm:555 install_steps_interactive.pm:735
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Ŝanĝu vian KDROM!\n"
-"\n"
-"Bonvole, enŝovu la KDROM-on etikedatan \"%s\" en via drajvo kaj klaku \"Jes"
-"\"\n"
-"kiam vi finos.\n"
-"Se vi ne havas ĝin, klaku \"Nuligu\" por eviti la instaladon de ĉi tiu KDROM."
-
-#: install_steps_gtk.pm:570 install_steps_interactive.pm:746
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Estis eraro ordigi pakaĵojn:"
-
-#: install_steps_gtk.pm:570 install_steps_gtk.pm:574
-#: install_steps_interactive.pm:746 install_steps_interactive.pm:750
-#, c-format
-msgid "Go on anyway?"
-msgstr "Ĉu vi deziras daŭri tamen?"
-
-#: install_steps_gtk.pm:574 install_steps_interactive.pm:750
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Estis eraro dum instalado de pakaĵoj:"
-
-#: install_steps_gtk.pm:616 install_steps_interactive.pm:921
-#: install_steps_interactive.pm:1073
-#, c-format
-msgid "not configured"
-msgstr "ne konfigurita"
-
-#: install_steps_gtk.pm:679
-#, c-format
-msgid ""
-"The following installation media have been found.\n"
-"If you want to skip some of them, you can unselect them now."
-msgstr ""
-
-#: install_steps_gtk.pm:688
-#, c-format
-msgid ""
-"You have the option to copy the contents of the CDs onto the hard drive "
-"before installation.\n"
-"It will then continue from the hard drive and the packages will remain "
-"available once the system is fully installed."
-msgstr ""
-
-#: install_steps_gtk.pm:690
-#, c-format
-msgid "Copy whole CDs"
-msgstr ""
-
-#: install_steps_interactive.pm:85
-#, c-format
-msgid "License agreement"
-msgstr "Licenca kontrakto"
-
-#: install_steps_interactive.pm:89
-#, fuzzy, c-format
-msgid "Release Notes"
-msgstr "Bonvole atendu"
-
-#: install_steps_interactive.pm:119
-#, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Bonvole elektu vian klavar-aranĝon."
-
-#: install_steps_interactive.pm:121
-#, fuzzy, c-format
-msgid "Here is the full list of available keyboards"
-msgstr "Jen la kompleta listo de atingeblaj landoj"
-
-#: install_steps_interactive.pm:151
-#, c-format
-msgid "Install/Upgrade"
-msgstr "Instalado/Ĝisdatigo"
-
-#: install_steps_interactive.pm:152
-#, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Ĉu tiu ĉi estas instalado aŭ ĝisdatigo?"
-
-#: install_steps_interactive.pm:158
-#, c-format
-msgid "Upgrade %s"
-msgstr "Ĝisdatigu %s"
-
-#: install_steps_interactive.pm:168
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "La pasvortoj ne egalas"
-
-#: install_steps_interactive.pm:185
-#, c-format
-msgid "Please choose your type of mouse."
-msgstr "Bonvole elektu la specon de via muso."
-
-#: install_steps_interactive.pm:194 standalone/mousedrake:46
-#, c-format
-msgid "Mouse Port"
-msgstr "Muspordo"
-
-#: install_steps_interactive.pm:195 standalone/mousedrake:47
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-
-#: install_steps_interactive.pm:205
-#, c-format
-msgid "Buttons emulation"
-msgstr ""
-
-#: install_steps_interactive.pm:207
-#, c-format
-msgid "Button 2 Emulation"
-msgstr ""
-
-#: install_steps_interactive.pm:208
-#, c-format
-msgid "Button 3 Emulation"
-msgstr ""
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
-
-#: install_steps_interactive.pm:229
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Konfiguras PCMCIA kartojn..."
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "IDE"
-msgstr "IDE"
-
-#: install_steps_interactive.pm:236
-#, c-format
-msgid "Configuring IDE"
-msgstr "Konfiguras IDE"
-
-#: install_steps_interactive.pm:256 network/tools.pm:181
-#, c-format
-msgid "No partition available"
-msgstr "neniuj haveblaj subdiskoj"
-
-#: install_steps_interactive.pm:259
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Leganta subdiskojn por trovi kroĉpunktojn"
-
-#: install_steps_interactive.pm:266
-#, c-format
-msgid "Choose the mount points"
-msgstr "Elektu surmetingojn"
-
-#: install_steps_interactive.pm:312
-#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"Ne libera spaco por 1mb-startparto! La instalado daurigos, sed por startigi "
-"vian sistemon, vi devos krei la startpartan subdiskon en DiskDrake"
-
-#: install_steps_interactive.pm:317
-#, fuzzy, c-format
-msgid ""
-"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
-"to boot your system, you'll need to create the bootstrap partition in "
-"DiskDrake"
-msgstr ""
-"Ne libera spaco por 1mb-startparto! La instalado daurigos, sed por startigi "
-"vian sistemon, vi devos krei la startpartan subdiskon en DiskDrake"
-
-#: install_steps_interactive.pm:353
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: install_steps_interactive.pm:355
-#, c-format
-msgid "Check bad blocks?"
-msgstr "Ĉu kontrolas malbonajn blokojn?"
-
-#: install_steps_interactive.pm:383
-#, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
-msgstr ""
-"Mi malsukcesis kontroli la dosiersistemon %s. Ĉu vi deziras ripari la "
-"erarojn? (atentu, vi povas perdi datenojn)"
-
-#: install_steps_interactive.pm:386
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nesufiĉa interŝanĝospaco por plenumi instalado, bonvolu aldoni iom"
-
-#: install_steps_interactive.pm:393
-#, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Serĉas haveblajn pakaĵojn kaj refaras la rpm-datenbazon..."
-
-#: install_steps_interactive.pm:394 install_steps_interactive.pm:452
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Serĉas haveblajn pakaĵojn"
-
-#: install_steps_interactive.pm:397
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Rigardante jam instalitajn pakaĵojn..."
-
-#: install_steps_interactive.pm:401
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Trovadas pakaĵojn por promocii"
-
-#: install_steps_interactive.pm:421 install_steps_interactive.pm:826
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Elektu spegulon de kiu havigi la pakaĵojn"
-
-#: install_steps_interactive.pm:461
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr ""
-"Via komputilo ne havas sufiĉe da spaco por instalado aŭ promocio (%d > %d)."
-
-#: install_steps_interactive.pm:495
-#, fuzzy, c-format
-msgid ""
-"Please choose load or save package selection.\n"
-"The format is the same as auto_install generated files."
-msgstr ""
-"Bonvole elektu ŝargu aŭ konservu pakaĵ-elekton sur disketo.\n"
-"La formato estas la sama kiel disketoj generitaj per auto_install."
-
-#: install_steps_interactive.pm:497
-#, c-format
-msgid "Load"
-msgstr "Ŝargu"
-
-#: install_steps_interactive.pm:497 standalone/drakbackup:3916
-#: standalone/drakbackup:3989 standalone/drakroam:210 standalone/logdrake:173
-#, c-format
-msgid "Save"
-msgstr "Konservu"
-
-#: install_steps_interactive.pm:505
-#, fuzzy, c-format
-msgid "Bad file"
-msgstr "Ŝargu dosieron"
-
-#: install_steps_interactive.pm:581
-#, c-format
-msgid "Selected size is larger than available space"
-msgstr "Elektita grandeco estas pli ampleksa ol disponebla spaco"
-
-#: install_steps_interactive.pm:596
-#, c-format
-msgid "Type of install"
-msgstr "Instaltipo"
-
-#: install_steps_interactive.pm:597
-#, c-format
-msgid ""
-"You have not selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Vi ne elektis pakaĵgrupon.\n"
-"Bonvole elektu la minimuman instaladon kiun vi deziras:"
-
-#: install_steps_interactive.pm:601
-#, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Kun baza dokumentaĵo (rekomendita!)"
-
-#: install_steps_interactive.pm:602
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Vere minimuma instalado (precipe ne urpmi)"
-
-#: install_steps_interactive.pm:641 standalone/drakxtv:52
-#, c-format
-msgid "All"
-msgstr "Ĉiuj"
-
-#: install_steps_interactive.pm:680
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Se vi havas ĉiujn de la KDROM-oj en la listo sube, klaku \"Jes\".\n"
-"Se vi havas neniujn de ĉi tiuj KDROM-oj, klaku \"Nuligu\".\n"
-"Se vi mankas nur iujn de la KDROM-oj, malelektu ilin, kaj poste klaku \"Jes"
-"\"."
-
-#: install_steps_interactive.pm:685
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "KDROM etikedata \"%s\""
-
-#: install_steps_interactive.pm:706
-#, c-format
-msgid "Preparing installation"
-msgstr "Preparas instaladon"
-
-#: install_steps_interactive.pm:715
-#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"Instalas pakaĵo %s\n"
-"%d%%"
-
-#: install_steps_interactive.pm:764
-#, c-format
-msgid "Post-install configuration"
-msgstr "Post-instala konfigurado"
-
-#: install_steps_interactive.pm:771
-#, c-format
-msgid "Please ensure the Update Modules media is in drive %s"
-msgstr ""
-
-#: install_steps_interactive.pm:800
-#, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates?"
-msgstr ""
-"Vi havas nun la eblecon deŝuti ĝisdatigitajn pakaĵojn. Tiuj pakaĵoj\n"
-"estas ĝisdatigitaj post eldonado de tiu ĉi eldono. Ili povas\n"
-"enteni sekureco- aŭ eraro-riparojn.\n"
-"\n"
-"Por deŝuti tiujn pakaĵojn, vi bezonas funkciantan Interret-\n"
-"konekton.\n"
-"\n"
-"Ĉu vi deziras instali tiujn ĝisdatigojn?"
-
-#: install_steps_interactive.pm:821
-#, c-format
-msgid ""
-"Contacting Mandrivalinux web site to get the list of available mirrors..."
-msgstr ""
-
-#: install_steps_interactive.pm:840
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Kontaktu la spegulon por havigi la liston de havebla pakaĵoj"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Ne povis kontakti spegulon %s"
-
-#: install_steps_interactive.pm:844
-#, c-format
-msgid "Would you like to try again?"
-msgstr "Ĉu vi ŝatus reprovi?"
-
-#: install_steps_interactive.pm:870 standalone/drakclock:45
-#, c-format
-msgid "Which is your timezone?"
-msgstr "kio estas vian horzonon?"
-
-#: install_steps_interactive.pm:875
-#, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Auxtomata hor-sinkronizado (uzante NTP) "
-
-#: install_steps_interactive.pm:883
-#, c-format
-msgid "NTP Server"
-msgstr "NTP Servilo"
-
-#: install_steps_interactive.pm:925 steps.pm:30
-#, c-format
-msgid "Summary"
-msgstr "Resumo"
-
-#: install_steps_interactive.pm:938 install_steps_interactive.pm:946
-#: install_steps_interactive.pm:964 install_steps_interactive.pm:971
-#: install_steps_interactive.pm:1125 services.pm:133
-#: standalone/drakbackup:1571
-#, c-format
-msgid "System"
-msgstr "Sistemo"
-
-#: install_steps_interactive.pm:978 install_steps_interactive.pm:1005
-#: install_steps_interactive.pm:1022 install_steps_interactive.pm:1038
-#: install_steps_interactive.pm:1049
-#, c-format
-msgid "Hardware"
-msgstr "Aparataro"
-
-#: install_steps_interactive.pm:984 install_steps_interactive.pm:993
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Malproksima CUPS-a servilo"
-
-#: install_steps_interactive.pm:984
-#, c-format
-msgid "No printer"
-msgstr "Neniu printilo"
-
-#: install_steps_interactive.pm:1026
-#, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Ĉu vi havas ISA-sonkarton?"
-
-#: install_steps_interactive.pm:1028
-#, fuzzy, c-format
-msgid ""
-"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
-"card"
-msgstr "Rulu \"sndconfig\" post instalado por konfiguri vian sonkarton"
-
-#: install_steps_interactive.pm:1030
-#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Ne detektis sonkarto. Provu \"harddrake\" post instalado"
-
-#: install_steps_interactive.pm:1050
-#, c-format
-msgid "Graphical interface"
-msgstr "Grafika interfaco"
-
-#: install_steps_interactive.pm:1056 install_steps_interactive.pm:1071
-#, c-format
-msgid "Network & Internet"
-msgstr "Reto kaj Interreto"
-
-#: install_steps_interactive.pm:1073
-#, fuzzy, c-format
-msgid "configured"
-msgstr "rekonfiguru"
-
-#: install_steps_interactive.pm:1082 install_steps_interactive.pm:1096
-#: steps.pm:20
-#, c-format
-msgid "Security"
-msgstr "Sekureco"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "activated"
-msgstr "aktiva"
-
-#: install_steps_interactive.pm:1101
-#, c-format
-msgid "disabled"
-msgstr "malebligita"
-
-#: install_steps_interactive.pm:1112
-#, c-format
-msgid "Boot"
-msgstr "Starto"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: install_steps_interactive.pm:1116
-#, c-format
-msgid "%s on %s"
-msgstr "%s sur %s"
-
-#: install_steps_interactive.pm:1130 services.pm:175
-#, c-format
-msgid "Services: %d activated for %d registered"
-msgstr ""
-
-#: install_steps_interactive.pm:1140
-#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Vi ne konfiguris X-on. Ĉu vi certas vere voli tion?"
-
-#: install_steps_interactive.pm:1220
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Preparas startŝargilon"
-
-#: install_steps_interactive.pm:1230
-#, fuzzy, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
-"will not work for you. The install will continue, but you'll need to use "
-"BootX or some other means to boot your machine. The kernel argument for the "
-"root fs is: root=%s"
-msgstr ""
-"Ŝajne vi havas malnovegan aŭ nekonatan maŝinon,\n"
-"la yaboot-startilo ne funkcios por vi.\n"
-"La instalado daŭrigos, sed vi devos\n"
-"uzi BootX aŭ alian rimedon por startigi vian maŝinon"
-
-#: install_steps_interactive.pm:1236
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Ĉu vi deziras uzi aboot-on?"
-
-#: install_steps_interactive.pm:1239
-#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Eraro daŭre mi instalis \"aboot\",\n"
-"Ĉu mi devus provi perforte instali eĉ se tio detruas la unuan subdiskon?"
-
-#: install_steps_interactive.pm:1260
-#, c-format
-msgid ""
-"In this security level, access to the files in the Windows partition is "
-"restricted to the administrator."
-msgstr ""
-
-#: install_steps_interactive.pm:1289 standalone/drakautoinst:76
-#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Enŝovu malplenan disketon en drajvo %s"
-
-#: install_steps_interactive.pm:1294
-#, fuzzy, c-format
-msgid "Please insert another floppy for drivers disk"
-msgstr "Enŝovu la uzitan startigan disketon en drajvo %s"
-
-#: install_steps_interactive.pm:1296
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Kreas aŭtoinstalan disketon"
-
-#: install_steps_interactive.pm:1308
-#, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Kelkaj paŝoj ne finiĝis.\n"
-"\n"
-"Ĉu vi vere volas ĉesi nun?"
-
-#: install_steps_interactive.pm:1324
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Kreu aŭtoinstalan disketon"
-
-#: install_steps_interactive.pm:1326
-#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-
-#: install_steps_newt.pm:20
-#, c-format
-msgid "Mandrivalinux Installation %s"
-msgstr ""
-
-#. -PO: This string must fit in a 80-char wide text screen
-#: install_steps_newt.pm:34
-#, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tabo>/<Alt-Tabo> inter eroj | <Spaco> elektas | <F12> sekva ekrano "
-
-#: interactive.pm:193
-#, c-format
-msgid "Choose a file"
-msgstr "Elektu dosieron"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakbackup:1512
-#: standalone/drakfont:656 standalone/drakroam:218 standalone/drakups:301
-#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:333
-#: standalone/drakvpn:694
-#, c-format
-msgid "Add"
-msgstr "Aldonu"
-
-#: interactive.pm:318 interactive/gtk.pm:489
-#, c-format
-msgid "Modify"
-msgstr "Ŝanĝu"
-
-#: interactive.pm:318 interactive/gtk.pm:489 standalone/drakroam:202
-#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, c-format
-msgid "Remove"
-msgstr "Forigu"
-
-#: interactive.pm:395
-#, c-format
-msgid "Basic"
-msgstr "Baza"
-
-#: interactive.pm:433 interactive/newt.pm:321 ugtk2.pm:506
-#, c-format
-msgid "Finish"
-msgstr "Finu"
-
-#: interactive/newt.pm:92
-#, c-format
-msgid "Do"
-msgstr "Faru"
-
-#: interactive/stdio.pm:29 interactive/stdio.pm:148
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Malbona elektaĵo, provu denove\n"
-
-#: interactive/stdio.pm:30 interactive/stdio.pm:149
-#, c-format
-msgid "Your choice? (default %s) "
-msgstr "Via elektaĵo? (defaŭlo estas %s) "
-
-#: interactive/stdio.pm:54
-#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-
-#: interactive/stdio.pm:70
-#, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Via elekto? (0/1, defaŭlo '%s') "
-
-#: interactive/stdio.pm:94
-#, c-format
-msgid "Button `%s': %s"
-msgstr "Butono '%s': %s"
-
-#: interactive/stdio.pm:95
-#, c-format
-msgid "Do you want to click on this button?"
-msgstr "Ĉu vi deziras alklaki tiun butonon?"
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Via elekto? (defaŭlto '%s'%s) "
-
-#: interactive/stdio.pm:104
-#, c-format
-msgid " enter `void' for void entry"
-msgstr ""
-
-#: interactive/stdio.pm:122
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
-
-#: interactive/stdio.pm:125
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-
-#: interactive/stdio.pm:138
-#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-
-#: interactive/stdio.pm:145
-#, c-format
-msgid "Re-submit"
-msgstr ""
-
-#: keyboard.pm:171 keyboard.pm:205
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTZ)"
-msgstr "Ĉeĥa (QWERTZ)"
-
-#: keyboard.pm:172 keyboard.pm:207
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German"
-msgstr "Germana"
-
-#: keyboard.pm:173
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak"
-msgstr "Dvorak-a"
-
-#: keyboard.pm:174 keyboard.pm:224
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Spanish"
-msgstr "Hispana"
-
-#: keyboard.pm:175 keyboard.pm:225
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Finnish"
-msgstr "Finna"
-
-#: keyboard.pm:176 keyboard.pm:228
-#, c-format
-msgid ""
-"_: keyboard\n"
-"French"
-msgstr "Franca"
-
-#: keyboard.pm:177 keyboard.pm:272
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Norwegian"
-msgstr "Norvega"
-
-#: keyboard.pm:178
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish"
-msgstr "Pola"
-
-#: keyboard.pm:179 keyboard.pm:284
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian"
-msgstr "Rusa"
-
-#: keyboard.pm:181 keyboard.pm:290
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swedish"
-msgstr "Sveda"
-
-#: keyboard.pm:182 keyboard.pm:320
-#, c-format
-msgid "UK keyboard"
-msgstr "Unuiĝinta Regna klavaro"
-
-#: keyboard.pm:183 keyboard.pm:323
-#, c-format
-msgid "US keyboard"
-msgstr "Usona klavaro"
-
-#: keyboard.pm:185
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Albanian"
-msgstr "Albana"
-
-#: keyboard.pm:186
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (old)"
-msgstr "Armena (malnova)"
-
-#: keyboard.pm:187
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (typewriter)"
-msgstr "Armena (skribmaŝina)"
-
-#: keyboard.pm:188
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Armenian (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: keyboard.pm:189
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Arabic"
-msgstr "araba"
-
-#: keyboard.pm:190
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Azerbaidjani (latin)"
-msgstr "Azerbajĝana (latina)"
-
-#: keyboard.pm:191
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belgian"
-msgstr "Belga"
-
-#: keyboard.pm:192
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Inscript-layout)"
-msgstr "Bengala (Inscript aranĝo)"
-
-#: keyboard.pm:193
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bengali (Probhat)"
-msgstr "Bengala (Probhat aranĝo)"
-
-#: keyboard.pm:194
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (phonetic)"
-msgstr "Bulgara (fonetika)"
-
-#: keyboard.pm:195
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bulgarian (BDS)"
-msgstr "Bulgara (BDS)"
-
-#: keyboard.pm:196
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Brazilian (ABNT-2)"
-msgstr "Brazila (ABNT-2)"
-
-#: keyboard.pm:197
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Bosnian"
-msgstr "Bosna"
-
-#: keyboard.pm:198
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Belarusian"
-msgstr "Belarusa"
-
-#: keyboard.pm:200
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (German layout)"
-msgstr "Svisa (germana aranĝo)"
-
-#: keyboard.pm:202
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Swiss (French layout)"
-msgstr "Svisa (franca aranĝo)"
-
-#: keyboard.pm:204
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Cherokee syllabics"
-msgstr "araba"
-
-#: keyboard.pm:206
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Czech (QWERTY)"
-msgstr "Ĉeĥa (QWERTY)"
-
-#: keyboard.pm:208
-#, c-format
-msgid ""
-"_: keyboard\n"
-"German (no dead keys)"
-msgstr "Germana (neniom da mortaj klavoj)"
-
-#: keyboard.pm:209
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Devanagari"
-msgstr "devanagara"
-
-#: keyboard.pm:210
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Danish"
-msgstr "Dana"
-
-#: keyboard.pm:211
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (US)"
-msgstr "Dvorak-a (US)"
-
-#: keyboard.pm:213
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Esperanto)"
-msgstr "Dvorak-a (Norvega)"
-
-#: keyboard.pm:215
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (French)"
-msgstr "Dvorak-a (Norvega)"
-
-#: keyboard.pm:217
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (UK)"
-msgstr "Dvorak-a (US)"
-
-#: keyboard.pm:218
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Norwegian)"
-msgstr "Dvorak-a (Norvega)"
-
-#: keyboard.pm:220
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Polish)"
-msgstr "Dvorak-a (Sveda)"
-
-#: keyboard.pm:221
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dvorak (Swedish)"
-msgstr "Dvorak-a (Sveda)"
-
-#: keyboard.pm:222
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Dzongkha/Tibetan"
-msgstr "Bosna"
-
-#: keyboard.pm:223
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Estonian"
-msgstr "Estona"
-
-#: keyboard.pm:227
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Faroese"
-msgstr "Greka"
-
-#: keyboard.pm:229
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Russian\" layout)"
-msgstr "Kartvela (\"Rusa\" aranĝo)"
-
-#: keyboard.pm:230
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Georgian (\"Latin\" layout)"
-msgstr "Kartvela (\"Latina\" aranĝo)"
-
-#: keyboard.pm:231
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek"
-msgstr "Greka"
-
-#: keyboard.pm:232
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Greek (polytonic)"
-msgstr ""
-
-#: keyboard.pm:233
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gujarati"
-msgstr "gujarata"
-
-#: keyboard.pm:234
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Gurmukhi"
-msgstr "gumurka"
-
-#: keyboard.pm:235
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Croatian"
-msgstr "Kroata"
-
-#: keyboard.pm:236
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Hungarian"
-msgstr "Hungara"
-
-#: keyboard.pm:237
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Irish"
-msgstr ""
-
-#: keyboard.pm:238
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli"
-msgstr "Israela"
-
-#: keyboard.pm:239
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Israeli (phonetic)"
-msgstr "Israela (fonetika)"
-
-#: keyboard.pm:240
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Iranian"
-msgstr "Irana"
-
-#: keyboard.pm:241
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Icelandic"
-msgstr "Islanda"
-
-#: keyboard.pm:242
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Italian"
-msgstr "Itala"
-
-#: keyboard.pm:243
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Inuktitut"
-msgstr "inuita"
-
-#: keyboard.pm:248
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Japanese 106 keys"
-msgstr "Japana 106 klavoj"
-
-#: keyboard.pm:249
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kannada"
-msgstr "Kanado"
-
-#: keyboard.pm:252
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Korean"
-msgstr "Korea klavaro"
-
-#: keyboard.pm:254
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kurdish (arabic script)"
-msgstr "araba"
-
-#: keyboard.pm:255
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Kyrgyz"
-msgstr "Unuiĝinta Regna klavaro"
-
-#: keyboard.pm:256
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latin American"
-msgstr "Latinamerika"
-
-#: keyboard.pm:258
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Laotian"
-msgstr "Laosa"
-
-#: keyboard.pm:259
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (old)"
-msgstr "Litova AZERTY-a (malnova)"
-
-#: keyboard.pm:261
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian AZERTY (new)"
-msgstr "Litova AZERTY-a (nova)"
-
-#: keyboard.pm:262
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"number row\" QWERTY"
-msgstr "Litova \"numero-vica\" QWERTY-a"
-
-#: keyboard.pm:263
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Lithuanian \"phonetic\" QWERTY"
-msgstr "Litova \"fonetika\" QWERTY-a"
-
-#: keyboard.pm:264
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Latvian"
-msgstr "Latva"
-
-#: keyboard.pm:265
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Malayalam"
-msgstr "Malajalama"
-
-#: keyboard.pm:266
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Macedonian"
-msgstr "Macedona"
-
-#: keyboard.pm:267
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Myanmar (Burmese)"
-msgstr "Mianmara (burma)"
-
-#: keyboard.pm:268
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Mongolian (cyrillic)"
-msgstr "Mongola (cirila)"
-
-#: keyboard.pm:269
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (UK)"
-msgstr "Malta (UK)"
-
-#: keyboard.pm:270
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Maltese (US)"
-msgstr "Malta (US)"
-
-#: keyboard.pm:271
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Dutch"
-msgstr "Nederlanda"
-
-#: keyboard.pm:273
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Oriya"
-msgstr "Sirio"
-
-#: keyboard.pm:274
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwerty layout)"
-msgstr "Pola (qwerty aranĝo)"
-
-#: keyboard.pm:275
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Polish (qwertz layout)"
-msgstr "Pola (qwertz aranĝo)"
-
-#: keyboard.pm:277
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Pashto"
-msgstr "Pola"
-
-#: keyboard.pm:278
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Portuguese"
-msgstr "Portugala"
-
-#: keyboard.pm:280
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Canadian (Quebec)"
-msgstr "Kanada (Kebeka)"
-
-#: keyboard.pm:282
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwertz)"
-msgstr "Rumana (qwertz-a)"
-
-#: keyboard.pm:283
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Romanian (qwerty)"
-msgstr "Rumana (qwerty-a)"
-
-#: keyboard.pm:285
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Russian (phonetic)"
-msgstr "Rusa (fonetika)"
-
-#: keyboard.pm:286
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (norwegian)"
-msgstr "Dvorak-a (Norvega)"
-
-#: keyboard.pm:287
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Saami (swedish/finnish)"
-msgstr ""
-
-#: keyboard.pm:289
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Sindhi"
-msgstr "Taja klavaro"
-
-#: keyboard.pm:291
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovenian"
-msgstr "Slovena"
-
-#: keyboard.pm:293
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Sinhala"
-msgstr ""
-
-#: keyboard.pm:294
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTZ)"
-msgstr "Slovaka (QWERTZ)"
-
-#: keyboard.pm:295
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Slovakian (QWERTY)"
-msgstr "Slovaka (QWERTY)"
-
-#: keyboard.pm:297
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Serbian (cyrillic)"
-msgstr "Serba (cirila)"
-
-#: keyboard.pm:298
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac"
-msgstr "Sirio"
-
-#: keyboard.pm:299
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Syriac (phonetic)"
-msgstr "Armena (fonetika)"
-
-#: keyboard.pm:300
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Telugu"
-msgstr "Belgio"
-
-#: keyboard.pm:302
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (ISCII-layout)"
-msgstr "Tamila (ISCII)"
-
-#: keyboard.pm:303
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tamil (Typewriter-layout)"
-msgstr "Tamila (skribmaŝina)"
-
-#: keyboard.pm:304
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Kedmanee)"
-msgstr "Taja klavaro"
-
-#: keyboard.pm:305
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (TIS-820)"
-msgstr "Taja klavaro"
-
-#: keyboard.pm:307
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Thai (Pattachote)"
-msgstr "Taja klavaro"
-
-#: keyboard.pm:310
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (moroccan layout) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:311
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Tifinagh (phonetic) (+latin/arabic)"
-msgstr ""
-
-#: keyboard.pm:313
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Tajik"
-msgstr "Taja klavaro"
-
-#: keyboard.pm:315
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Turkmen"
-msgstr "Germana"
-
-#: keyboard.pm:316
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (traditional \"F\" model)"
-msgstr "Turka (tradicia \"F\" modelo)"
-
-#: keyboard.pm:317
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Turkish (modern \"Q\" model)"
-msgstr "Turka (moderna \"Q\" modelo)"
-
-#: keyboard.pm:319
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Ukrainian"
-msgstr "Ukrajna"
-
-#: keyboard.pm:322
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Urdu keyboard"
-msgstr "Sirio"
-
-#: keyboard.pm:324
-#, c-format
-msgid "US keyboard (international)"
-msgstr "Usona klavaro (internacia)"
-
-#: keyboard.pm:325
-#, fuzzy, c-format
-msgid ""
-"_: keyboard\n"
-"Uzbek (cyrillic)"
-msgstr "Serba (cirila)"
-
-#: keyboard.pm:327
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Vietnamese \"numeric row\" QWERTY"
-msgstr "Vjetnama \"numero-vica\" QWERTY-a"
-
-#: keyboard.pm:328
-#, c-format
-msgid ""
-"_: keyboard\n"
-"Yugoslavian (latin)"
-msgstr "Jugoslava (latina)"
-
-#: keyboard.pm:335
-#, c-format
-msgid "Right Alt key"
-msgstr ""
-
-#: keyboard.pm:336
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:337
-#, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:338
-#, c-format
-msgid "CapsLock key"
-msgstr ""
-
-#: keyboard.pm:339
-#, c-format
-msgid "Shift and CapsLock keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:340
-#, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:341
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:342
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menuo\"-klavo"
-
-#: keyboard.pm:343
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Maldekstra \"Vindozo\"-klavo"
-
-#: keyboard.pm:344
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Dekstra \"Vindozo\"-klavo"
-
-#: keyboard.pm:345
-#, c-format
-msgid "Both Control keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:346
-#, c-format
-msgid "Both Alt keys simultaneously"
-msgstr ""
-
-#: keyboard.pm:347
-#, fuzzy, c-format
-msgid "Left Shift key"
-msgstr "Maldekstra \"Vindozo\"-klavo"
-
-#: keyboard.pm:348
-#, fuzzy, c-format
-msgid "Right Shift key"
-msgstr "Dekstra \"Vindozo\"-klavo"
-
-#: keyboard.pm:349
-#, fuzzy, c-format
-msgid "Left Alt key"
-msgstr "Maldekstra \"Vindozo\"-klavo"
-
-#: keyboard.pm:350
-#, fuzzy, c-format
-msgid "Left Control key"
-msgstr "Malproksima printilo"
-
-#: keyboard.pm:351
-#, fuzzy, c-format
-msgid "Right Control key"
-msgstr "Dekstra \"Vindozo\"-klavo"
-
-#: keyboard.pm:387
-#, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-"Ĉi tie vi povas elekti la klavon aŭ klavkombinon kiu\n"
-"ebligos al vi ŝalti inter la diversaj klavaroj\n"
-"(ekz-e latinaj kaj ne-latinaj)"
-
-#: keyboard.pm:392
-#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
-msgstr ""
-
-#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
-#. -PO: or as "default:RTL", depending if your language is written from
-#. -PO: left to right, or from right to left; any other string is wrong.
-#: lang.pm:178
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
-
-#: lang.pm:195
-#, c-format
-msgid "Andorra"
-msgstr "Andoro"
-
-#: lang.pm:196 network/adsl_consts.pm:933
-#, c-format
-msgid "United Arab Emirates"
-msgstr "Unuiĝintaj Arabaj Emirlandoj"
-
-#: lang.pm:197
-#, c-format
-msgid "Afghanistan"
-msgstr "Afganistano"
-
-#: lang.pm:198
-#, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antigvo-Barbudo"
-
-#: lang.pm:199
-#, c-format
-msgid "Anguilla"
-msgstr "Angilo"
-
-#: lang.pm:200
-#, c-format
-msgid "Albania"
-msgstr "Albanio"
-
-#: lang.pm:201
-#, c-format
-msgid "Armenia"
-msgstr "Armenio"
-
-#: lang.pm:202
-#, c-format
-msgid "Netherlands Antilles"
-msgstr "Nederlandaj Antiloj"
-
-#: lang.pm:203
-#, c-format
-msgid "Angola"
-msgstr "Angolo"
-
-#: lang.pm:204
-#, c-format
-msgid "Antarctica"
-msgstr "Antarktio"
-
-#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
-#, c-format
-msgid "Argentina"
-msgstr "Argentino"
-
-#: lang.pm:206
-#, c-format
-msgid "American Samoa"
-msgstr "Amerika Samoo"
-
-#: lang.pm:209
-#, c-format
-msgid "Aruba"
-msgstr "Arubo"
-
-#: lang.pm:210
-#, c-format
-msgid "Azerbaijan"
-msgstr "Azerbajĝano"
-
-#: lang.pm:211
-#, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosnio-Hercegovino"
-
-#: lang.pm:212
-#, c-format
-msgid "Barbados"
-msgstr "Barbado"
-
-#: lang.pm:213
-#, c-format
-msgid "Bangladesh"
-msgstr "Bangladeŝo"
-
-#: lang.pm:215
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkino"
-
-#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
-#, c-format
-msgid "Bulgaria"
-msgstr "Bulgario"
-
-#: lang.pm:217
-#, c-format
-msgid "Bahrain"
-msgstr "Barejno"
-
-#: lang.pm:218
-#, c-format
-msgid "Burundi"
-msgstr "Burundo"
-
-#: lang.pm:219
-#, c-format
-msgid "Benin"
-msgstr "Benino"
-
-#: lang.pm:220
-#, c-format
-msgid "Bermuda"
-msgstr "Bermudo"
-
-#: lang.pm:221
-#, c-format
-msgid "Brunei Darussalam"
-msgstr "Brunejo Darusalamo"
-
-#: lang.pm:222
-#, c-format
-msgid "Bolivia"
-msgstr "Bolivio"
-
-#: lang.pm:224
-#, c-format
-msgid "Bahamas"
-msgstr "Bahamoj"
-
-#: lang.pm:225
-#, c-format
-msgid "Bhutan"
-msgstr "Butano"
-
-#: lang.pm:226
-#, c-format
-msgid "Bouvet Island"
-msgstr "Buvet-Insulo"
-
-#: lang.pm:227
-#, c-format
-msgid "Botswana"
-msgstr "Bocvano"
-
-#: lang.pm:228
-#, c-format
-msgid "Belarus"
-msgstr "Belarusio"
-
-#: lang.pm:229
-#, c-format
-msgid "Belize"
-msgstr "Belizio"
-
-#: lang.pm:231
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos-Insuloj (Keeling)"
-
-#: lang.pm:232
-#, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Kongo (Kinŝaso)"
-
-#: lang.pm:233
-#, c-format
-msgid "Central African Republic"
-msgstr "Centrafrika Respubliko"
-
-#: lang.pm:234
-#, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Kongo (Brazavilo)"
-
-#: lang.pm:236
-#, c-format
-msgid "Cote d'Ivoire"
-msgstr "Ebur-Bordo"
-
-#: lang.pm:237
-#, c-format
-msgid "Cook Islands"
-msgstr "Kuk-Insularo"
-
-#: lang.pm:238
-#, c-format
-msgid "Chile"
-msgstr "Ĉilio"
-
-#: lang.pm:239
-#, c-format
-msgid "Cameroon"
-msgstr "Kameruno"
-
-#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
-#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
-#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
-#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
-#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
-#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
-#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
-#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
-#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
-#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
-#, c-format
-msgid "China"
-msgstr "Ĉinio"
-
-#: lang.pm:241
-#, c-format
-msgid "Colombia"
-msgstr "Kolombio"
-
-#: lang.pm:243
-#, c-format
-msgid "Serbia & Montenegro"
-msgstr "Serbujo kaj Montenegro"
-
-#: lang.pm:244
-#, c-format
-msgid "Cuba"
-msgstr "Kubo"
-
-#: lang.pm:245
-#, c-format
-msgid "Cape Verde"
-msgstr "Kabo-Verdo"
-
-#: lang.pm:246
-#, c-format
-msgid "Christmas Island"
-msgstr "Kristnask-Insulo"
-
-#: lang.pm:247
-#, c-format
-msgid "Cyprus"
-msgstr "Kipro"
-
-#: lang.pm:250
-#, c-format
-msgid "Djibouti"
-msgstr "Ĝibutio"
-
-#: lang.pm:252
-#, c-format
-msgid "Dominica"
-msgstr "Dominiko"
-
-#: lang.pm:253
-#, c-format
-msgid "Dominican Republic"
-msgstr "Domingo"
-
-#: lang.pm:254 network/adsl_consts.pm:44
-#, c-format
-msgid "Algeria"
-msgstr "Alĝerio"
-
-#: lang.pm:255
-#, c-format
-msgid "Ecuador"
-msgstr "Ekvadoro"
-
-#: lang.pm:257
-#, c-format
-msgid "Egypt"
-msgstr "Egipto"
-
-#: lang.pm:258
-#, c-format
-msgid "Western Sahara"
-msgstr "Okcidenta Saharo"
-
-#: lang.pm:259
-#, c-format
-msgid "Eritrea"
-msgstr "Eritreo"
-
-#: lang.pm:261
-#, c-format
-msgid "Ethiopia"
-msgstr "Etiopio"
-
-#: lang.pm:263
-#, c-format
-msgid "Fiji"
-msgstr "Fiĝio"
-
-#: lang.pm:264
-#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Falklandaj Insuloj (Malvinoj)"
-
-#: lang.pm:265
-#, c-format
-msgid "Micronesia"
-msgstr "Mikronezio"
-
-#: lang.pm:266
-#, c-format
-msgid "Faroe Islands"
-msgstr "Faroaj Insuloj"
-
-#: lang.pm:268
-#, c-format
-msgid "Gabon"
-msgstr "Gabono"
-
-#: lang.pm:269 network/adsl_consts.pm:944 network/adsl_consts.pm:955
-#: network/netconnect.pm:53
-#, c-format
-msgid "United Kingdom"
-msgstr "Unuiĝinta Regno"
-
-#: lang.pm:270
-#, c-format
-msgid "Grenada"
-msgstr "Grenado"
-
-#: lang.pm:271
-#, c-format
-msgid "Georgia"
-msgstr "Kartvelujo"
-
-#: lang.pm:272
-#, c-format
-msgid "French Guiana"
-msgstr "Franca Gujano"
-
-#: lang.pm:273
-#, c-format
-msgid "Ghana"
-msgstr "Ganao"
-
-#: lang.pm:274
-#, c-format
-msgid "Gibraltar"
-msgstr "Ĝibraltaro"
-
-#: lang.pm:275
-#, c-format
-msgid "Greenland"
-msgstr "Groenlando"
-
-#: lang.pm:276
-#, c-format
-msgid "Gambia"
-msgstr "Gambio"
-
-#: lang.pm:277
-#, c-format
-msgid "Guinea"
-msgstr "Gvineo"
-
-#: lang.pm:278
-#, c-format
-msgid "Guadeloupe"
-msgstr "Gvadelupo"
-
-#: lang.pm:279
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatora Gvineo"
-
-#: lang.pm:281
-#, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Sud-Georgio kaj la Sudaj Sandviĉaj Insuloj"
-
-#: lang.pm:282
-#, c-format
-msgid "Guatemala"
-msgstr "Gvatemalo"
-
-#: lang.pm:283
-#, c-format
-msgid "Guam"
-msgstr "Gvamo"
-
-#: lang.pm:284
-#, c-format
-msgid "Guinea-Bissau"
-msgstr "Gvineo-Bisaŭo"
-
-#: lang.pm:285
-#, c-format
-msgid "Guyana"
-msgstr "Gujano"
-
-#: lang.pm:286
-#, fuzzy, c-format
-msgid "Hong Kong SAR (China)"
-msgstr "Hongkongo"
-
-#: lang.pm:287
-#, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Heard- kaj McDonald-Insuloj"
-
-#: lang.pm:288
-#, c-format
-msgid "Honduras"
-msgstr "Honduro"
-
-#: lang.pm:289
-#, c-format
-msgid "Croatia"
-msgstr "Kroatio"
-
-#: lang.pm:290
-#, c-format
-msgid "Haiti"
-msgstr "Haitio"
-
-#: lang.pm:292
-#, c-format
-msgid "Indonesia"
-msgstr "Indonezio"
-
-#: lang.pm:295
-#, c-format
-msgid "India"
-msgstr "Hindio"
-
-#: lang.pm:296
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Brita Teritorio de Hindia Oceano"
-
-#: lang.pm:297
-#, c-format
-msgid "Iraq"
-msgstr "Irako"
-
-#: lang.pm:298
-#, c-format
-msgid "Iran"
-msgstr "Irano"
-
-#: lang.pm:299
-#, c-format
-msgid "Iceland"
-msgstr "Islando"
-
-#: lang.pm:301
-#, c-format
-msgid "Jamaica"
-msgstr "Jamajko"
-
-#: lang.pm:302
-#, c-format
-msgid "Jordan"
-msgstr "Jordanio"
-
-#: lang.pm:304
-#, c-format
-msgid "Kenya"
-msgstr "Kenjo"
-
-#: lang.pm:305
-#, c-format
-msgid "Kyrgyzstan"
-msgstr "Kirgizistano"
-
-#: lang.pm:306
-#, c-format
-msgid "Cambodia"
-msgstr "Kamboĝo"
-
-#: lang.pm:307
-#, c-format
-msgid "Kiribati"
-msgstr "Kiribato"
-
-#: lang.pm:308
-#, c-format
-msgid "Comoros"
-msgstr "Komoroj"
-
-#: lang.pm:309
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Sent-Kristofo kaj Neviso"
-
-#: lang.pm:310
-#, c-format
-msgid "Korea (North)"
-msgstr "Koreio (Norda)"
-
-#: lang.pm:311
-#, c-format
-msgid "Korea"
-msgstr "Koreio"
-
-#: lang.pm:312
-#, c-format
-msgid "Kuwait"
-msgstr "Kuvajto"
-
-#: lang.pm:313
-#, c-format
-msgid "Cayman Islands"
-msgstr "Kajmana Insularo"
-
-#: lang.pm:314
-#, c-format
-msgid "Kazakhstan"
-msgstr "Kazaĥstano"
-
-#: lang.pm:315
-#, c-format
-msgid "Laos"
-msgstr "Laoso"
-
-#: lang.pm:316
-#, c-format
-msgid "Lebanon"
-msgstr "Libano"
-
-#: lang.pm:317
-#, c-format
-msgid "Saint Lucia"
-msgstr "Sent-Lucio"
-
-#: lang.pm:318
-#, c-format
-msgid "Liechtenstein"
-msgstr "Liĥtenŝtejno"
-
-#: lang.pm:319
-#, c-format
-msgid "Sri Lanka"
-msgstr "Sri Lanko"
-
-#: lang.pm:320
-#, c-format
-msgid "Liberia"
-msgstr "Liberio"
-
-#: lang.pm:321
-#, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
-
-#: lang.pm:322 network/adsl_consts.pm:600
-#, c-format
-msgid "Lithuania"
-msgstr "Litovio"
-
-#: lang.pm:323
-#, c-format
-msgid "Luxembourg"
-msgstr "Luksemburgo"
-
-#: lang.pm:324
-#, c-format
-msgid "Latvia"
-msgstr "Latvio"
-
-#: lang.pm:325
-#, c-format
-msgid "Libya"
-msgstr "Libio"
-
-#: lang.pm:326 network/adsl_consts.pm:609
-#, c-format
-msgid "Morocco"
-msgstr "Maroko"
-
-#: lang.pm:327
-#, c-format
-msgid "Monaco"
-msgstr "Monako"
-
-#: lang.pm:328
-#, c-format
-msgid "Moldova"
-msgstr "Moldovio"
-
-#: lang.pm:329
-#, c-format
-msgid "Madagascar"
-msgstr "Madagaskaro"
-
-#: lang.pm:330
-#, c-format
-msgid "Marshall Islands"
-msgstr "Insuloj Marŝalaj"
-
-#: lang.pm:331
-#, c-format
-msgid "Macedonia"
-msgstr "Macedonio"
-
-#: lang.pm:332
-#, c-format
-msgid "Mali"
-msgstr "Malio"
-
-#: lang.pm:333
-#, c-format
-msgid "Myanmar"
-msgstr "Mianmaro"
-
-#: lang.pm:334
-#, c-format
-msgid "Mongolia"
-msgstr "Mongolio"
-
-#: lang.pm:335
-#, c-format
-msgid "Northern Mariana Islands"
-msgstr "Insuloj Marianaj Nordaj"
-
-#: lang.pm:336
-#, c-format
-msgid "Martinique"
-msgstr "Martiniko"
-
-#: lang.pm:337
-#, c-format
-msgid "Mauritania"
-msgstr "Maŭrlando"
-
-#: lang.pm:338
-#, c-format
-msgid "Montserrat"
-msgstr "Montserato"
-
-#: lang.pm:339
-#, c-format
-msgid "Malta"
-msgstr "Malto"
-
-#: lang.pm:340
-#, c-format
-msgid "Mauritius"
-msgstr "Maŭricio"
-
-#: lang.pm:341
-#, c-format
-msgid "Maldives"
-msgstr "Maldivoj"
-
-#: lang.pm:342
-#, c-format
-msgid "Malawi"
-msgstr "Malavio"
-
-#: lang.pm:343
-#, c-format
-msgid "Mexico"
-msgstr "Meksikio"
-
-#: lang.pm:344
-#, c-format
-msgid "Malaysia"
-msgstr "Malajzio"
-
-#: lang.pm:345
-#, c-format
-msgid "Mozambique"
-msgstr "Mozambiko"
-
-#: lang.pm:346
-#, c-format
-msgid "Namibia"
-msgstr "Namibio"
-
-#: lang.pm:347
-#, c-format
-msgid "New Caledonia"
-msgstr "Nov-Kaledonio"
-
-#: lang.pm:348
-#, c-format
-msgid "Niger"
-msgstr "Niĝero"
-
-#: lang.pm:349
-#, c-format
-msgid "Norfolk Island"
-msgstr "Norfolkaj Insuloj"
-
-#: lang.pm:350
-#, c-format
-msgid "Nigeria"
-msgstr "Niĝerio"
-
-#: lang.pm:351
-#, c-format
-msgid "Nicaragua"
-msgstr "Nikaragvo"
-
-#: lang.pm:354
-#, c-format
-msgid "Nepal"
-msgstr "Nepalo"
-
-#: lang.pm:355
-#, c-format
-msgid "Nauru"
-msgstr "Nauro"
-
-#: lang.pm:356
-#, c-format
-msgid "Niue"
-msgstr "Niue"
-
-#: lang.pm:358
-#, c-format
-msgid "Oman"
-msgstr "Omano"
-
-#: lang.pm:359
-#, c-format
-msgid "Panama"
-msgstr "Panamo"
-
-#: lang.pm:360
-#, c-format
-msgid "Peru"
-msgstr "Peruo"
-
-#: lang.pm:361
-#, c-format
-msgid "French Polynesia"
-msgstr "Franca Polinezio"
-
-#: lang.pm:362
-#, c-format
-msgid "Papua New Guinea"
-msgstr "Papuo-Nov-Gvineo"
-
-#: lang.pm:363
-#, c-format
-msgid "Philippines"
-msgstr "Filipinoj"
-
-#: lang.pm:364
-#, c-format
-msgid "Pakistan"
-msgstr "Pakistano"
-
-#: lang.pm:366
-#, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Sanpetro-kaj-Mikelono"
-
-#: lang.pm:367
-#, c-format
-msgid "Pitcairn"
-msgstr "Pitkarna Insulo"
-
-#: lang.pm:368
-#, c-format
-msgid "Puerto Rico"
-msgstr "Porto-Riko"
-
-#: lang.pm:369
-#, c-format
-msgid "Palestine"
-msgstr "Palestino"
-
-#: lang.pm:371
-#, c-format
-msgid "Paraguay"
-msgstr "Paragvajo"
-
-#: lang.pm:372
-#, c-format
-msgid "Palau"
-msgstr "Palaŭo"
-
-#: lang.pm:373
-#, c-format
-msgid "Qatar"
-msgstr "Kataro"
-
-#: lang.pm:374
-#, c-format
-msgid "Reunion"
-msgstr "Reunio"
-
-#: lang.pm:375
-#, c-format
-msgid "Romania"
-msgstr "Rumanujo"
-
-#: lang.pm:377
-#, c-format
-msgid "Rwanda"
-msgstr "Ruando"
-
-#: lang.pm:378
-#, c-format
-msgid "Saudi Arabia"
-msgstr "Saŭda Arabujo"
-
-#: lang.pm:379
-#, c-format
-msgid "Solomon Islands"
-msgstr "Salomon-Insuloj"
-
-#: lang.pm:380
-#, c-format
-msgid "Seychelles"
-msgstr "Sejŝeloj"
-
-#: lang.pm:381
-#, c-format
-msgid "Sudan"
-msgstr "Sudano"
-
-#: lang.pm:383
-#, c-format
-msgid "Singapore"
-msgstr "Singapuro"
-
-#: lang.pm:384
-#, c-format
-msgid "Saint Helena"
-msgstr "Sankt-Heleno"
-
-#: lang.pm:385 network/adsl_consts.pm:737
-#, c-format
-msgid "Slovenia"
-msgstr "Slovenujo"
-
-#: lang.pm:386
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Spicbergo kaj Jan-Majen-Insuloj"
-
-#: lang.pm:388
-#, c-format
-msgid "Sierra Leone"
-msgstr "Siera-Leono"
-
-#: lang.pm:389
-#, c-format
-msgid "San Marino"
-msgstr "San-Marino"
-
-#: lang.pm:390
-#, c-format
-msgid "Senegal"
-msgstr "Senegalio"
-
-#: lang.pm:391
-#, c-format
-msgid "Somalia"
-msgstr "Somalujo"
-
-#: lang.pm:392
-#, c-format
-msgid "Suriname"
-msgstr "Surinamo"
-
-#: lang.pm:393
-#, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao-Tomeo kaj Principeo"
-
-#: lang.pm:394
-#, c-format
-msgid "El Salvador"
-msgstr "Salvadoro"
-
-#: lang.pm:395
-#, c-format
-msgid "Syria"
-msgstr "Sirio"
-
-#: lang.pm:396
-#, c-format
-msgid "Swaziland"
-msgstr "Svazilando"
-
-#: lang.pm:397
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Turks kaj Caicos Insuloj"
-
-#: lang.pm:398
-#, c-format
-msgid "Chad"
-msgstr "Ĉado"
-
-#: lang.pm:399
-#, c-format
-msgid "French Southern Territories"
-msgstr "francaj sudaj teritorioj"
-
-#: lang.pm:400
-#, c-format
-msgid "Togo"
-msgstr "Togo"
-
-#: lang.pm:402
-#, c-format
-msgid "Tajikistan"
-msgstr "Taĝikistano"
-
-#: lang.pm:403
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelau"
-
-#: lang.pm:404
-#, c-format
-msgid "East Timor"
-msgstr "Orienta Timoro"
-
-#: lang.pm:405
-#, c-format
-msgid "Turkmenistan"
-msgstr "Turkmenistano"
-
-#: lang.pm:406 network/adsl_consts.pm:921
-#, c-format
-msgid "Tunisia"
-msgstr "Tunizio"
-
-#: lang.pm:407
-#, c-format
-msgid "Tonga"
-msgstr "Tongo"
-
-#: lang.pm:408
-#, c-format
-msgid "Turkey"
-msgstr "Turkujo"
-
-#: lang.pm:409
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidado kaj Tobago"
-
-#: lang.pm:410
-#, c-format
-msgid "Tuvalu"
-msgstr "Tuvalo"
-
-#: lang.pm:412
-#, c-format
-msgid "Tanzania"
-msgstr "Tanzanio"
-
-#: lang.pm:413
-#, c-format
-msgid "Ukraine"
-msgstr "Ukrajno"
-
-#: lang.pm:414
-#, c-format
-msgid "Uganda"
-msgstr "Ugando"
-
-#: lang.pm:415
-#, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "usonaj malgrandaj eksteraj insuloj"
-
-#: lang.pm:417
-#, c-format
-msgid "Uruguay"
-msgstr "Urugvajo"
-
-#: lang.pm:418
-#, c-format
-msgid "Uzbekistan"
-msgstr "Uzbekistano"
-
-#: lang.pm:419
-#, c-format
-msgid "Vatican"
-msgstr "Vatikano"
-
-#: lang.pm:420
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Sent-Vincento kaj la Grenadinoj"
-
-#: lang.pm:421
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuelo"
-
-#: lang.pm:422
-#, c-format
-msgid "Virgin Islands (British)"
-msgstr "Insuloj Virgaj (Britaj)"
-
-#: lang.pm:423
-#, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Insuloj Virgaj (Usonaj)"
-
-#: lang.pm:424
-#, c-format
-msgid "Vietnam"
-msgstr "Vjetnamio"
-
-#: lang.pm:425
-#, c-format
-msgid "Vanuatu"
-msgstr "Vanuatuo"
-
-#: lang.pm:426
-#, c-format
-msgid "Wallis and Futuna"
-msgstr "valis-kaj-futuna"
-
-#: lang.pm:427
-#, c-format
-msgid "Samoa"
-msgstr "Samoo"
-
-#: lang.pm:428
-#, c-format
-msgid "Yemen"
-msgstr "Jemeno"
-
-#: lang.pm:429
-#, c-format
-msgid "Mayotte"
-msgstr "majota"
-
-#: lang.pm:431
-#, c-format
-msgid "Zambia"
-msgstr "Zambio"
-
-#: lang.pm:432
-#, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabvo"
-
-#: lang.pm:1073
-#, fuzzy, c-format
-msgid "You should install the following packages: %s"
-msgstr "Instalanta pakaĵo %s"
-
-#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
-#: lang.pm:1076 standalone/scannerdrake:135
-#, c-format
-msgid ", "
-msgstr ", "
-
-#: lang.pm:1129
-#, c-format
-msgid "Welcome to %s"
-msgstr "Bonvenon al %s"
-
-#: loopback.pm:31
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Cirklaj surmetingoj %s\n"
-
-#: lvm.pm:112
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Forigu la logikajn spacojn unue\n"
-
-#: modules/interactive.pm:21 standalone/drakconnect:1068
-#, c-format
-msgid "Parameters"
-msgstr "Parametroj"
-
-#: modules/interactive.pm:21 standalone/draksec:51
-#, c-format
-msgid "NONE"
-msgstr ""
-
-#: modules/interactive.pm:22
-#, fuzzy, c-format
-msgid "Module configuration"
-msgstr "Interreta Konfigurado"
-
-#: modules/interactive.pm:22
-#, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
-
-#: modules/interactive.pm:63
-#, c-format
-msgid "Found %s interfaces"
-msgstr "Trovis %s interfacojn"
-
-#: modules/interactive.pm:64
-#, c-format
-msgid "Do you have another one?"
-msgstr "Ĉu vi havas alian?"
-
-#: modules/interactive.pm:65
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Ĉu vi havas iun %s interfacon?"
-
-#: modules/interactive.pm:71
-#, c-format
-msgid "See hardware info"
-msgstr "Vidu hardvaran informon"
-
-#: modules/interactive.pm:82
-#, fuzzy, c-format
-msgid "Installing driver for USB controller"
-msgstr "Instalas pelilon por %s karto %s"
-
-#: modules/interactive.pm:83
-#, fuzzy, c-format
-msgid "Installing driver for firewire controller %s"
-msgstr "Instalas pelilon por %s karto %s"
-
-#: modules/interactive.pm:84
-#, fuzzy, c-format
-msgid "Installing driver for hard drive controller %s"
-msgstr "Instalas pelilon por %s karto %s"
-
-#: modules/interactive.pm:85
-#, fuzzy, c-format
-msgid "Installing driver for ethernet controller %s"
-msgstr "Instalas pelilon por %s karto %s"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: modules/interactive.pm:96
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Instalas pelilon por %s karto %s"
-
-#: modules/interactive.pm:99
-#, c-format
-msgid "(module %s)"
-msgstr "(modulo %s)"
-
-#: modules/interactive.pm:109
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
-
-#: modules/interactive.pm:115
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Nun vi povas provizi ĝiajn opciojn al modulo %s.\n"
-"Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
-"Ekzemple, ``io=0x300 irq=7''"
-
-#: modules/interactive.pm:117
-#, c-format
-msgid "Module options:"
-msgstr "Modulaj opcioj:"
-
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: modules/interactive.pm:130
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Kiun %s pelilon devus mi provi?"
-
-#: modules/interactive.pm:139
-#, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"Iuokaze, la %s pelilo bezonas havi aldonan informon por ĝuste funkcii,\n"
-"kvankam ĝi normale funkcias bone sen la informo.  Ĉu vi deziras specifi\n"
-"aldonajn opciojn por ĝi aŭ permesi al la pelilo esplori vian komputilon\n"
-"por la informo ĝi bezonas?  Kelkfoje, esplori svenas komputilon, sed\n"
-"ĝi ne devus kaŭzi difekton."
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Autoprobe"
-msgstr "Aŭtomate esploru"
-
-#: modules/interactive.pm:143
-#, c-format
-msgid "Specify options"
-msgstr "Specifu opciojn"
-
-#: modules/interactive.pm:155
-#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Ŝargado de modulo %s malsukcesis.\n"
-"Ĉu vi deziras trovi denove kun aliaj parametroj?"
-
-#: modules/parameters.pm:49
-#, c-format
-msgid "a number"
-msgstr "numero"
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated numbers"
-msgstr ""
-
-#: modules/parameters.pm:51
-#, c-format
-msgid "%d comma separated strings"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated numbers"
-msgstr ""
-
-#: modules/parameters.pm:53
-#, c-format
-msgid "comma separated strings"
-msgstr "eroj disigitaj per komo"
-
-#: mouse.pm:25
-#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Muso"
-
-#: mouse.pm:31 security/level.pm:12
-#, c-format
-msgid "Standard"
-msgstr "Laŭnorma"
-
-#: mouse.pm:32
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Loĝiteka MouseMan+"
-
-#: mouse.pm:33
-#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Nespecifa PS2 RadoMuso"
-
-#: mouse.pm:34
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
-
-#: mouse.pm:36 network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/modem.pm:85 network/modem.pm:99 network/modem.pm:104
-#: network/modem.pm:137 network/netconnect.pm:700 network/netconnect.pm:705
-#: network/netconnect.pm:717 network/netconnect.pm:722
-#: network/netconnect.pm:738 network/netconnect.pm:740
-#, c-format
-msgid "Automatic"
-msgstr "Aŭtomate"
-
-#: mouse.pm:39 mouse.pm:73
-#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:40 mouse.pm:68
-#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
-
-#: mouse.pm:41
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
-
-#: mouse.pm:42 mouse.pm:52
-#, c-format
-msgid "Microsoft Explorer"
-msgstr "Mikrosofta Esplorilo"
-
-#: mouse.pm:47 mouse.pm:79
-#, c-format
-msgid "1 button"
-msgstr "1 butona"
-
-#: mouse.pm:48 mouse.pm:57
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Nespecifa 2 Butona Muso"
-
-#: mouse.pm:50 mouse.pm:59
-#, fuzzy, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "Nespecifa 3 Butona Muso"
-
-#: mouse.pm:51
-#, c-format
-msgid "Wheel"
-msgstr "Rado"
-
-#: mouse.pm:55
-#, c-format
-msgid "serial"
-msgstr "seria"
-
-#: mouse.pm:58
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Nespecifa 3 Butona Muso"
-
-#: mouse.pm:60
-#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Mikrosofta IntelliMouse"
-
-#: mouse.pm:61
-#, c-format
-msgid "Logitech MouseMan"
-msgstr "Loĝiteka MouseMan"
-
-#: mouse.pm:62
-#, fuzzy, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Loĝiteka MouseMan"
-
-#: mouse.pm:63
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
-
-#: mouse.pm:65
-#, c-format
-msgid "Logitech CC Series"
-msgstr "Loĝiteka CC serio"
-
-#: mouse.pm:66
-#, fuzzy, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Loĝiteka CC serio"
-
-#: mouse.pm:67
-#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Loĝiteka MouseMan+/FirstMouse+"
-
-#: mouse.pm:69
-#, c-format
-msgid "MM Series"
-msgstr "MM Serio"
-
-#: mouse.pm:70
-#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
-
-#: mouse.pm:71
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Loĝiteka Muso (seria, malnova C7 speco)"
-
-#: mouse.pm:72
-#, fuzzy, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Loĝiteka Muso (seria, malnova C7 speco)"
-
-#: mouse.pm:74
-#, fuzzy, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse"
-
-#: mouse.pm:77
-#, c-format
-msgid "busmouse"
-msgstr "bus-muso"
-
-#: mouse.pm:80
-#, c-format
-msgid "2 buttons"
-msgstr "2 butonoj"
-
-#: mouse.pm:81
-#, c-format
-msgid "3 buttons"
-msgstr "3 butonoj"
-
-#: mouse.pm:82
-#, c-format
-msgid "3 buttons with Wheel emulation"
-msgstr ""
-
-#: mouse.pm:86
-#, c-format
-msgid "Universal"
-msgstr "Universala"
-
-#: mouse.pm:88
-#, c-format
-msgid "Any PS/2 & USB mice"
-msgstr ""
-
-#: mouse.pm:89
-#, fuzzy, c-format
-msgid "Microsoft Xbox Controller S"
-msgstr "Mikrosofta Esplorilo"
-
-#: mouse.pm:93 standalone/drakconnect:362 standalone/drakvpn:1140
-#, c-format
-msgid "none"
-msgstr "neniu"
-
-#: mouse.pm:95
-#, c-format
-msgid "No mouse"
-msgstr "Neniu Muso"
-
-#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
-#, c-format
-msgid "Synaptics Touchpad"
-msgstr ""
-
-#: mouse.pm:561
-#, c-format
-msgid "Please test the mouse"
-msgstr "Bonvole, provu la muson"
-
-#: mouse.pm:563
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Por aktivigi la muson,"
-
-#: mouse.pm:564
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "MOVU VIAN RADON!"
-
-#: network/adsl.pm:19
-#, c-format
-msgid "use PPPoE"
-msgstr "uzu PPPoE"
-
-#: network/adsl.pm:20
-#, c-format
-msgid "use PPTP"
-msgstr "uzu PPTP"
-
-#: network/adsl.pm:21
-#, c-format
-msgid "use DHCP"
-msgstr "uzu DHCP"
-
-#: network/adsl.pm:22
-#, fuzzy, c-format
-msgid "Alcatel Speedtouch USB"
-msgstr "Bonvole, provu la muson"
-
-#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
-#, fuzzy, c-format
-msgid " - detected"
-msgstr "detektita"
-
-#: network/adsl.pm:23
-#, c-format
-msgid "Sagem (using PPPoA) USB"
-msgstr ""
-
-#: network/adsl.pm:24
-#, c-format
-msgid "Sagem (using DHCP) USB"
-msgstr ""
-
-#: network/adsl.pm:35 network/netconnect.pm:906
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Konektu al la Interreto"
-
-#: network/adsl.pm:36 network/netconnect.pm:907
-#, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use PPTP, a few use DHCP.\n"
-"If you do not know, choose 'use PPPoE'"
-msgstr ""
-"La plej ofte uzata maniero por konekti per ADSL estas pppoe.\n"
-"Kelkaj konektoj uzas PPTP, malmultaj uzas DHCP.\n"
-"Se vi ne scias, elektu 'uzu PPPoE'"
-
-#: network/adsl.pm:41 network/netconnect.pm:911
-#, fuzzy, c-format
-msgid "ADSL connection type:"
-msgstr "ADSL-konekto"
-
-#: network/drakfirewall.pm:12 share/compssUsers.pl:84
-#, c-format
-msgid "Web Server"
-msgstr "Interret-servilo"
-
-#: network/drakfirewall.pm:17
-#, c-format
-msgid "Domain Name Server"
-msgstr "Domajn-nom-servilo"
-
-#: network/drakfirewall.pm:22
-#, fuzzy, c-format
-msgid "SSH server"
-msgstr "NIS Servilo"
-
-#: network/drakfirewall.pm:27
-#, c-format
-msgid "FTP server"
-msgstr "Servilo FTP"
-
-#: network/drakfirewall.pm:32
-#, c-format
-msgid "Mail Server"
-msgstr "Retpoŝt-servilo"
-
-#: network/drakfirewall.pm:37
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "Serviloj POP kaj IMAP"
-
-#: network/drakfirewall.pm:42
-#, fuzzy, c-format
-msgid "Telnet server"
-msgstr "X servilo"
-
-#: network/drakfirewall.pm:48
-#, c-format
-msgid "Windows Files Sharing (SMB)"
-msgstr ""
-
-#: network/drakfirewall.pm:54
-#, fuzzy, c-format
-msgid "CUPS server"
-msgstr "DNA servilo"
-
-#: network/drakfirewall.pm:60
-#, c-format
-msgid "Echo request (ping)"
-msgstr ""
-
-#: network/drakfirewall.pm:65
-#, c-format
-msgid "BitTorrent"
-msgstr ""
-
-#: network/drakfirewall.pm:158
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandriva Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized Mandriva Security Firewall distribution."
-msgstr ""
-
-#: network/drakfirewall.pm:164
-#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: network/drakfirewall.pm:181
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
-
-#: network/drakfirewall.pm:182
-#, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-
-#: network/drakfirewall.pm:188
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535.\n"
-"\n"
-"You can also give a range of ports (eg: 24300:24350/udp)"
-msgstr ""
-
-#: network/drakfirewall.pm:198
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
-
-#: network/drakfirewall.pm:200
-#, c-format
-msgid "Other ports"
-msgstr "Aliaj pordoj"
-
-#: network/isdn.pm:124 network/netconnect.pm:547 network/netconnect.pm:661
-#: network/netconnect.pm:664 network/netconnect.pm:822
-#: network/netconnect.pm:826
-#, c-format
-msgid "Unlisted - edit manually"
-msgstr ""
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
-
-#: network/isdn.pm:167 network/netconnect.pm:479
-#, c-format
-msgid "I do not know"
-msgstr "Mi ne scias"
-
-#: network/isdn.pm:168 network/netconnect.pm:479
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: network/isdn.pm:169 network/netconnect.pm:479
-#, c-format
-msgid "USB"
-msgstr "USB"
-
-#: network/modem.pm:58 network/modem.pm:59 network/modem.pm:60
-#: network/netconnect.pm:705 network/netconnect.pm:722
-#: network/netconnect.pm:738
-#, c-format
-msgid "Manual"
-msgstr "Mana"
-
-#: network/ndiswrapper.pm:27
-#, c-format
-msgid "No device supporting the %s ndiswrapper driver is present!"
-msgstr ""
-
-#: network/ndiswrapper.pm:33
-#, c-format
-msgid "Please select the Windows driver (.inf file)"
-msgstr ""
-
-#: network/ndiswrapper.pm:41
-#, c-format
-msgid "Unable to install the %s ndiswrapper driver!"
-msgstr ""
-
-#: network/ndiswrapper.pm:89
-#, c-format
-msgid "Unable to load the ndiswrapper module!"
-msgstr ""
-
-#: network/ndiswrapper.pm:95
-#, c-format
-msgid ""
-"The selected device has already been configured with the %s driver.\n"
-"Do you really want to use a ndiswrapper driver ?"
-msgstr ""
-
-#: network/ndiswrapper.pm:101
-#, c-format
-msgid "Unable to find the ndiswrapper interface!"
-msgstr ""
-
-#: network/netconnect.pm:91 network/netconnect.pm:576
-#: network/netconnect.pm:580
-#, fuzzy, c-format
-msgid "Manual choice"
-msgstr "Mianmaro"
-
-#: network/netconnect.pm:91
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Interna ISDN-karto"
-
-#: network/netconnect.pm:104 printer/printerdrake.pm:1418
-#: standalone/drakups:75
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Interreta Konfigurado"
-
-#: network/netconnect.pm:105
-#, fuzzy, c-format
-msgid "Automatic IP (BOOTP/DHCP)"
-msgstr "Aŭtomata IP"
-
-#: network/netconnect.pm:107
-#, c-format
-msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
-msgstr ""
-
-#: network/netconnect.pm:110
-#, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokolo por la cetera mondo"
-
-#: network/netconnect.pm:112 standalone/drakconnect:574
-#, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Eŭropa protokolo (EDSS1)"
-
-#: network/netconnect.pm:113 standalone/drakconnect:575
-#, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Protokolo por la cetera mondo \n"
-"Neniom da D-Kanelo (lukontraktataj lineoj)"
-
-#: network/netconnect.pm:153
-#, fuzzy, c-format
-msgid "Alcatel speedtouch USB modem"
-msgstr "Bonvole, provu la muson"
-
-#: network/netconnect.pm:154
-#, fuzzy, c-format
-msgid "Sagem USB modem"
-msgstr "Sistema modalo"
-
-#: network/netconnect.pm:155
-#, c-format
-msgid "Bewan modem"
-msgstr ""
-
-#: network/netconnect.pm:156
-#, c-format
-msgid "ECI Hi-Focus modem"
-msgstr ""
-
-#: network/netconnect.pm:160
-#, c-format
-msgid "Dynamic Host Configuration Protocol (DHCP)"
-msgstr ""
-
-#: network/netconnect.pm:161
-#, fuzzy, c-format
-msgid "Manual TCP/IP configuration"
-msgstr "Interreta Konfigurado"
-
-#: network/netconnect.pm:162
-#, c-format
-msgid "Point to Point Tunneling Protocol (PPTP)"
-msgstr ""
-
-#: network/netconnect.pm:163
-#, c-format
-msgid "PPP over Ethernet (PPPoE)"
-msgstr ""
-
-#: network/netconnect.pm:164
-#, c-format
-msgid "PPP over ATM (PPPoA)"
-msgstr ""
-
-#: network/netconnect.pm:165
-#, c-format
-msgid "DSL over CAPI"
-msgstr ""
-
-#: network/netconnect.pm:169
-#, c-format
-msgid "Bridged Ethernet LLC"
-msgstr ""
-
-#: network/netconnect.pm:170
-#, c-format
-msgid "Bridged Ethernet VC"
-msgstr ""
-
-#: network/netconnect.pm:171
-#, c-format
-msgid "Routed IP LLC"
-msgstr ""
-
-#: network/netconnect.pm:172
-#, c-format
-msgid "Routed IP VC"
-msgstr ""
-
-#: network/netconnect.pm:173
-#, c-format
-msgid "PPPoA LLC"
-msgstr ""
-
-#: network/netconnect.pm:174
-#, c-format
-msgid "PPPoA VC"
-msgstr ""
-
-#: network/netconnect.pm:178 standalone/drakconnect:509
-#, c-format
-msgid "Script-based"
-msgstr "Programeto-bazata"
-
-#: network/netconnect.pm:179 standalone/drakconnect:509
-#, c-format
-msgid "PAP"
-msgstr "PAP (Pasvorta Aŭtentikigada Protokolo)"
-
-#: network/netconnect.pm:180 standalone/drakconnect:509
-#, c-format
-msgid "Terminal-based"
-msgstr "Finaparato-bazata"
-
-#: network/netconnect.pm:181 standalone/drakconnect:509
-#, c-format
-msgid "CHAP"
-msgstr "per CHAP"
-
-#: network/netconnect.pm:182 standalone/drakconnect:509
-#, c-format
-msgid "PAP/CHAP"
-msgstr "PAP/CHAP"
-
-#: network/netconnect.pm:187
-#, c-format
-msgid "Open WEP"
-msgstr ""
-
-#: network/netconnect.pm:188
-#, c-format
-msgid "Restricted WEP"
-msgstr ""
-
-#: network/netconnect.pm:189
-#, c-format
-msgid "WPA Pre-Shared Key"
-msgstr ""
-
-#: network/netconnect.pm:294 standalone/drakconnect:60
-#, fuzzy, c-format
-msgid "Network & Internet Configuration"
-msgstr "Reta Konfiguraĵo"
-
-#: network/netconnect.pm:300
-#, fuzzy, c-format
-msgid "(detected on port %s)"
-msgstr "detektita en pordo %s"
-
-#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:302
-#, fuzzy, c-format
-msgid "(detected %s)"
-msgstr "Duobla surmetingo %s"
-
-#: network/netconnect.pm:302
-#, fuzzy, c-format
-msgid "(detected)"
-msgstr "detektita"
-
-#: network/netconnect.pm:304
-#, c-format
-msgid "LAN connection"
-msgstr "LAN Konfiguraĵo"
-
-#: network/netconnect.pm:305 network/netconnect.pm:324
-#, fuzzy, c-format
-msgid "Wireless connection"
-msgstr "Kabla konekto"
-
-#: network/netconnect.pm:306
-#, c-format
-msgid "ADSL connection"
-msgstr "ADSL-konekto"
-
-#: network/netconnect.pm:307
-#, c-format
-msgid "Cable connection"
-msgstr "Kabla konekto"
-
-#: network/netconnect.pm:308
-#, c-format
-msgid "ISDN connection"
-msgstr "ISDN-konekto"
-
-#: network/netconnect.pm:309
-#, fuzzy, c-format
-msgid "Modem connection"
-msgstr "Winmodem-konekto"
-
-#: network/netconnect.pm:310
-#, c-format
-msgid "DVB connection"
-msgstr ""
-
-#: network/netconnect.pm:320
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Elektu la konekton kiun vi deziras konfiguri"
-
-#: network/netconnect.pm:334
-#, fuzzy, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
-msgstr ""
-"\n"
-"\n"
-"\n"
-"Ni konfiguros nun l %s konekton.\n"
-"\n"
-"\n"
-"Premu JES por daŭrigi."
-
-#: network/netconnect.pm:342 network/netconnect.pm:958
-#, c-format
-msgid "Connection Configuration"
-msgstr "Konfigurado de Konekto"
-
-#: network/netconnect.pm:343 network/netconnect.pm:959
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Bonvole plenigu aŭ marku la suban kampon"
-
-#: network/netconnect.pm:350 standalone/drakconnect:565
-#, c-format
-msgid "Card IRQ"
-msgstr "IRQ de Karto"
-
-#: network/netconnect.pm:351 standalone/drakconnect:566
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Memoro de Karto (DMA)"
-
-#: network/netconnect.pm:352 standalone/drakconnect:567
-#, c-format
-msgid "Card IO"
-msgstr "I/O (Eneligo) de Karto"
-
-#: network/netconnect.pm:353 standalone/drakconnect:568
-#, c-format
-msgid "Card IO_0"
-msgstr "I/O 0 (Eneligo 0) de Karto"
-
-#: network/netconnect.pm:354
-#, c-format
-msgid "Card IO_1"
-msgstr "I/O 1 (Eneligo 1) de Karto"
-
-#: network/netconnect.pm:355
-#, c-format
-msgid "Your personal phone number"
-msgstr "Via persona telefonnumero"
-
-#: network/netconnect.pm:356 network/netconnect.pm:962
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Nomo de interretprovizanto (ekz-e provizanto.net)"
-
-#: network/netconnect.pm:357 standalone/drakconnect:504
-#, c-format
-msgid "Provider phone number"
-msgstr "Telefonnumero de interretprovizanto"
-
-#: network/netconnect.pm:358
-#, fuzzy, c-format
-msgid "Provider DNS 1 (optional)"
-msgstr "Provizanto DNS 1 (nedeviga)"
-
-#: network/netconnect.pm:359
-#, fuzzy, c-format
-msgid "Provider DNS 2 (optional)"
-msgstr "Provizanto DNS 2 (nedeviga)"
-
-#: network/netconnect.pm:360 standalone/drakconnect:455
-#, c-format
-msgid "Dialing mode"
-msgstr "Diskuma modalo"
-
-#: network/netconnect.pm:361 standalone/drakconnect:460
-#: standalone/drakconnect:528
-#, c-format
-msgid "Connection speed"
-msgstr "Rapido de konekto"
-
-#: network/netconnect.pm:362 standalone/drakconnect:465
-#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Speco de konekto"
-
-#: network/netconnect.pm:365 network/netconnect.pm:386
-#: network/netconnect.pm:965 standalone/drakconnect:502
-#, c-format
-msgid "Account Login (user name)"
-msgstr "Konta Salutnomo (uzula nomo)"
-
-#: network/netconnect.pm:366 network/netconnect.pm:387
-#: network/netconnect.pm:966 standalone/drakconnect:503
-#, c-format
-msgid "Account Password"
-msgstr "Konta Pasvorto"
-
-#: network/netconnect.pm:382
-#, fuzzy, c-format
-msgid "Cable: account options"
-msgstr "Telefon-konektaj opcioj"
-
-#: network/netconnect.pm:385
-#, c-format
-msgid "Use BPALogin (needed for Telstra)"
-msgstr ""
-
-#: network/netconnect.pm:419 network/netconnect.pm:775
-#: network/netconnect.pm:1004 network/netconnect.pm:1309
-#, fuzzy, c-format
-msgid "Select the network interface to configure:"
-msgstr "Elektu la retan interfacon"
-
-#: network/netconnect.pm:421 network/netconnect.pm:469
-#: network/netconnect.pm:776 network/netconnect.pm:1006
-#: network/shorewall.pm:96 standalone/drakconnect:720 standalone/drakgw:224
-#: standalone/drakvpn:221
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Printservilo"
-
-#: network/netconnect.pm:422 network/netconnect.pm:430
-#, c-format
-msgid "External ISDN modem"
-msgstr "Eksterna ISDN-modemo"
-
-#: network/netconnect.pm:468 standalone/harddrake2:215
-#, fuzzy, c-format
-msgid "Select a device!"
-msgstr "Elektu grafikan karton"
-
-#: network/netconnect.pm:477 network/netconnect.pm:487
-#: network/netconnect.pm:497 network/netconnect.pm:530
-#: network/netconnect.pm:544
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN-a Konfiguraĵon"
-
-#: network/netconnect.pm:478
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Kiun specon de karto vi havas?"
-
-#: network/netconnect.pm:488
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Se via havas ISA-an karton, la valoro sur la sekvanta ekrano devus esti "
-"ĝusta.\n"
-"\n"
-"Se vi havas PCMCIA-an karton, vi bezonas scii la IRQ-o kaj I/O (Eneligo)\n"
-"por via karto.\n"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Continue"
-msgstr "Ĉu mi devus daŭri?"
-
-#: network/netconnect.pm:492
-#, c-format
-msgid "Abort"
-msgstr "Ĉesigu"
-
-#: network/netconnect.pm:498
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Kiu el la sekvaj estas via ISDN-karto?"
-
-#: network/netconnect.pm:516
-#, c-format
-msgid ""
-"A CAPI driver is available for this modem. This CAPI driver can offer more "
-"capabilities than the free driver (like sending faxes). Which driver do you "
-"want to use?"
-msgstr ""
-
-#: network/netconnect.pm:518 standalone/drakconnect:117 standalone/drakups:251
-#: standalone/harddrake2:132
-#, c-format
-msgid "Driver"
-msgstr "Pelilo"
-
-#: network/netconnect.pm:530
-#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Kiun protokolon vi deziras uzi?"
-
-#: network/netconnect.pm:532 standalone/drakconnect:117
-#: standalone/drakconnect:311 standalone/drakconnect:573
-#: standalone/drakvpn:1142
-#, c-format
-msgid "Protocol"
-msgstr "Protokolo"
-
-#: network/netconnect.pm:544
-#, c-format
-msgid ""
-"Select your provider.\n"
-"If it is not listed, choose Unlisted."
-msgstr ""
-"Elektu vian interretprovizanton.\n"
-" Se ĝin ne estas en la listo, elektu Nelistiĝitan"
-
-#: network/netconnect.pm:546 network/netconnect.pm:660
-#: network/netconnect.pm:821
-#, fuzzy, c-format
-msgid "Provider:"
-msgstr "Printilo"
-
-#: network/netconnect.pm:561
-#, c-format
-msgid ""
-"Your modem is not supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-
-#: network/netconnect.pm:573
-#, fuzzy, c-format
-msgid "Select the modem to configure:"
-msgstr "Elektu la retan interfacon"
-
-#: network/netconnect.pm:627
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: network/netconnect.pm:658
-#, fuzzy, c-format
-msgid "Select your provider:"
-msgstr "Elektu Printilan Konekton"
-
-#: network/netconnect.pm:682
-#, fuzzy, c-format
-msgid "Dialup: account options"
-msgstr "Telefon-konektaj opcioj"
-
-#: network/netconnect.pm:685
-#, c-format
-msgid "Connection name"
-msgstr "Nomo de konekto"
-
-#: network/netconnect.pm:686
-#, c-format
-msgid "Phone number"
-msgstr "Telefonnumero"
-
-#: network/netconnect.pm:687
-#, c-format
-msgid "Login ID"
-msgstr "Salutnomo"
-
-#: network/netconnect.pm:702 network/netconnect.pm:735
-#, fuzzy, c-format
-msgid "Dialup: IP parameters"
-msgstr "Parametroj"
-
-#: network/netconnect.pm:705
-#, fuzzy, c-format
-msgid "IP parameters"
-msgstr "Parametroj"
-
-#: network/netconnect.pm:706 network/netconnect.pm:1096
-#: printer/printerdrake.pm:460 standalone/drakconnect:117
-#: standalone/drakconnect:327 standalone/drakconnect:915
-#: standalone/drakups:286
-#, c-format
-msgid "IP address"
-msgstr "IP-adreso"
-
-#: network/netconnect.pm:707
-#, fuzzy, c-format
-msgid "Subnet mask"
-msgstr "Retmasko"
-
-#: network/netconnect.pm:719
-#, c-format
-msgid "Dialup: DNS parameters"
-msgstr ""
-
-#: network/netconnect.pm:722
-#, c-format
-msgid "DNS"
-msgstr "DNS"
-
-#: network/netconnect.pm:723
-#, c-format
-msgid "Domain name"
-msgstr "Domajna nomo"
-
-#: network/netconnect.pm:724 network/netconnect.pm:963
-#: standalone/drakconnect:1033
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
-
-#: network/netconnect.pm:725 network/netconnect.pm:964
-#: standalone/drakconnect:1034
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Du DNS-a Servilo (nedeviga)"
-
-#: network/netconnect.pm:726
-#, fuzzy, c-format
-msgid "Set hostname from IP"
-msgstr "Printilaj Poŝtejo"
-
-#: network/netconnect.pm:738 standalone/drakconnect:338
-#, c-format
-msgid "Gateway"
-msgstr "Kluzo"
-
-#: network/netconnect.pm:739
-#, fuzzy, c-format
-msgid "Gateway IP address"
-msgstr "IP-adreso"
-
-#: network/netconnect.pm:775
-#, fuzzy, c-format
-msgid "ADSL configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: network/netconnect.pm:819
-#, fuzzy, c-format
-msgid "Please choose your ADSL provider"
-msgstr "Bonvole elektu vian landon."
-
-#: network/netconnect.pm:840
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
-msgstr ""
-
-#: network/netconnect.pm:844 network/netconnect.pm:849
-#, fuzzy, c-format
-msgid "Use a floppy"
-msgstr "Konservu sur disketo"
-
-#: network/netconnect.pm:844 network/netconnect.pm:853
-#, fuzzy, c-format
-msgid "Use my Windows partition"
-msgstr "Kalkulas Vindozajn dosiersistemajn limojn"
-
-#: network/netconnect.pm:844 network/netconnect.pm:856
-#, c-format
-msgid "Do it later"
-msgstr ""
-
-#: network/netconnect.pm:863
-#, c-format
-msgid "Firmware copy failed, file %s not found"
-msgstr ""
-
-#: network/netconnect.pm:870
-#, c-format
-msgid "Firmware copy succeeded"
-msgstr ""
-
-#: network/netconnect.pm:885
-#, c-format
-msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-
-#: network/netconnect.pm:968
-#, c-format
-msgid "Virtual Path ID (VPI):"
-msgstr ""
-
-#: network/netconnect.pm:969
-#, c-format
-msgid "Virtual Circuit ID (VCI):"
-msgstr ""
-
-#: network/netconnect.pm:972
-#, fuzzy, c-format
-msgid "Encapsulation:"
-msgstr "Gratulojn!"
-
-#: network/netconnect.pm:994
-#, c-format
-msgid ""
-"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
-"problem.\n"
-"\n"
-"You can find a driver on http://eciadsl.flashtux.org/"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Manually load a driver"
-msgstr ""
-
-#: network/netconnect.pm:1006
-#, c-format
-msgid "Use a Windows driver (with ndiswrapper)"
-msgstr ""
-
-#: network/netconnect.pm:1013 network/netconnect.pm:1274
-#: network/netconnect.pm:1278 printer/printerdrake.pm:3741
-#, fuzzy, c-format
-msgid "Could not install the %s package!"
-msgstr "Instalanta pakaĵo %s"
-
-#: network/netconnect.pm:1048
-#, fuzzy, c-format
-msgid "Zeroconf hostname resolution"
-msgstr "Poŝtejo"
-
-#: network/netconnect.pm:1049 network/netconnect.pm:1083
-#, fuzzy, c-format
-msgid "Configuring network device %s (driver %s)"
-msgstr "Konfiguras retan aparaton %s"
-
-#: network/netconnect.pm:1050
-#, c-format
-msgid ""
-"The following protocols can be used to configure a LAN connection. Please "
-"choose the one you want to use"
-msgstr ""
-
-#: network/netconnect.pm:1084
-#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"Bonvole enigu la IP-an konfigurâjon por ĉi tiu komputilo.\n"
-"Ĉiu ero devus esti enigata kiel IP-adreson en punktita-decimala notacio\n"
-"(ekzemple, 1.2.3.4)."
-
-#: network/netconnect.pm:1091 standalone/drakconnect:384
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Bonvole, provu la muson"
-
-#: network/netconnect.pm:1092 standalone/drakconnect:386
-#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Poŝtejo"
-
-#: network/netconnect.pm:1097 standalone/drakconnect:332
-#: standalone/drakconnect:916 standalone/drakgw:320
-#, c-format
-msgid "Netmask"
-msgstr "Retmasko"
-
-#: network/netconnect.pm:1099 standalone/drakconnect:448
-#, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr ""
-
-#: network/netconnect.pm:1101 standalone/drakconnect:449
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Reta Konfiguraĵo"
-
-#: network/netconnect.pm:1103 standalone/drakconnect:443
-#, c-format
-msgid "Start at boot"
-msgstr "Startu ĉe starto"
-
-#: network/netconnect.pm:1105 standalone/drakconnect:471
-#, fuzzy, c-format
-msgid "Metric"
-msgstr "limigu"
-
-#: network/netconnect.pm:1107 standalone/drakconnect:380
-#: standalone/drakconnect:919
-#, c-format
-msgid "DHCP client"
-msgstr ""
-
-#: network/netconnect.pm:1109 standalone/drakconnect:390
-#, fuzzy, c-format
-msgid "DHCP timeout (in seconds)"
-msgstr "Speco de konekto"
-
-#: network/netconnect.pm:1110 standalone/drakconnect:393
-#, fuzzy, c-format
-msgid "Get DNS servers from DHCP"
-msgstr "IP de SMB servilo"
-
-#: network/netconnect.pm:1111 standalone/drakconnect:394
-#, c-format
-msgid "Get YP servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1112 standalone/drakconnect:395
-#, c-format
-msgid "Get NTPD servers from DHCP"
-msgstr ""
-
-#: network/netconnect.pm:1121 printer/printerdrake.pm:1672
-#: standalone/drakconnect:683
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: network/netconnect.pm:1125 standalone/drakconnect:687
-#, fuzzy, c-format
-msgid "Netmask should be in format 255.255.224.0"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: network/netconnect.pm:1129
-#, c-format
-msgid "Warning: IP address %s is usually reserved!"
-msgstr ""
-
-#: network/netconnect.pm:1134 standalone/drakTermServ:1783
-#: standalone/drakTermServ:1784 standalone/drakTermServ:1785
-#, c-format
-msgid "%s already in use\n"
-msgstr ""
-
-#: network/netconnect.pm:1167
-#, fuzzy, c-format
-msgid "Choose an ndiswrapper driver"
-msgstr "Elektu X-servilon"
-
-#: network/netconnect.pm:1169
-#, c-format
-msgid "Use the ndiswrapper driver %s"
-msgstr ""
-
-#: network/netconnect.pm:1169
-#, fuzzy, c-format
-msgid "Install a new driver"
-msgstr "Instalu sistemon"
-
-#: network/netconnect.pm:1181
-#, c-format
-msgid "Select a device:"
-msgstr ""
-
-#: network/netconnect.pm:1208
-#, c-format
-msgid "Please enter the wireless parameters for this card:"
-msgstr ""
-
-#: network/netconnect.pm:1211 standalone/drakconnect:415
-#, fuzzy, c-format
-msgid "Operating Mode"
-msgstr "Spertuloreĝimo"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Ad-hoc"
-msgstr ""
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Managed"
-msgstr "Elektu vian lingvon"
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Master"
-msgstr "majota"
-
-#: network/netconnect.pm:1212
-#, fuzzy, c-format
-msgid "Repeater"
-msgstr "Restaŭru de dosiero"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Secondary"
-msgstr "Dua"
-
-#: network/netconnect.pm:1212
-#, c-format
-msgid "Auto"
-msgstr "Aŭtomate"
-
-#: network/netconnect.pm:1214 standalone/drakconnect:416
-#, c-format
-msgid "Network name (ESSID)"
-msgstr ""
-
-#: network/netconnect.pm:1215 standalone/drakconnect:417
-#, fuzzy, c-format
-msgid "Network ID"
-msgstr "Reto"
-
-#: network/netconnect.pm:1216 standalone/drakconnect:418
-#, c-format
-msgid "Operating frequency"
-msgstr ""
-
-#: network/netconnect.pm:1217 standalone/drakconnect:419
-#, c-format
-msgid "Sensitivity threshold"
-msgstr ""
-
-#: network/netconnect.pm:1218 standalone/drakconnect:420
-#, c-format
-msgid "Bitrate (in b/s)"
-msgstr ""
-
-#: network/netconnect.pm:1219
-#, c-format
-msgid "Encryption mode"
-msgstr ""
-
-#: network/netconnect.pm:1223 standalone/drakconnect:431
-#, c-format
-msgid "RTS/CTS"
-msgstr ""
-
-#: network/netconnect.pm:1224
-#, c-format
-msgid ""
-"RTS/CTS adds a handshake before each packet transmission to make sure that "
-"the\n"
-"channel is clear. This adds overhead, but increase performance in case of "
-"hidden\n"
-"nodes or large number of active nodes. This parameter sets the size of the\n"
-"smallest packet for which the node sends RTS, a value equal to the maximum\n"
-"packet size disable the scheme. You may also set this parameter to auto, "
-"fixed\n"
-"or off."
-msgstr ""
-
-#: network/netconnect.pm:1231 standalone/drakconnect:432
-#, fuzzy, c-format
-msgid "Fragmentation"
-msgstr "Dokumentaro"
-
-#: network/netconnect.pm:1232 standalone/drakconnect:433
-#, c-format
-msgid "Iwconfig command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1233
-#, c-format
-msgid ""
-"Here, one can configure some extra wireless parameters such as:\n"
-"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
-"as the hostname).\n"
-"\n"
-"See iwconfig(8) man page for further information."
-msgstr ""
-
-#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1240 standalone/drakconnect:434
-#, c-format
-msgid "Iwspy command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1241
-#, c-format
-msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
-"interface and to read back quality of link information for each of those.\n"
-"\n"
-"This information is the same as the one available in /proc/net/wireless :\n"
-"quality of the link, signal strength and noise level.\n"
-"\n"
-"See iwpspy(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1250 standalone/drakconnect:435
-#, c-format
-msgid "Iwpriv command extra arguments"
-msgstr ""
-
-#: network/netconnect.pm:1251
-#, c-format
-msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
-"network\n"
-"interface.\n"
-"\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
-"to\n"
-"iwconfig which deals with generic ones).\n"
-"\n"
-"In theory, the documentation of each device driver should indicate how to "
-"use\n"
-"those interface specific commands and their effect.\n"
-"\n"
-"See iwpriv(8) man page for further information."
-msgstr ""
-
-#: network/netconnect.pm:1266
-#, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1270
-#, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
-
-#: network/netconnect.pm:1309
-#, c-format
-msgid "DVB configuration"
-msgstr ""
-
-#: network/netconnect.pm:1310
-#, c-format
-msgid "DVB Adapter"
-msgstr ""
-
-#: network/netconnect.pm:1328
-#, c-format
-msgid "DVB adapter settings"
-msgstr ""
-
-#: network/netconnect.pm:1331
-#, c-format
-msgid "Adapter card"
-msgstr ""
-
-#: network/netconnect.pm:1332
-#, c-format
-msgid "Net demux"
-msgstr ""
-
-#: network/netconnect.pm:1333
-#, c-format
-msgid "PID"
-msgstr ""
-
-#: network/netconnect.pm:1361
-#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"Bonvole enigu vian poŝtejon.\n"
-"Via poŝtejo devus esti plene specifita poŝtejo,\n"
-"ekzemple ``miakomputilo.mialaborejo.miafirmao.com''.\n"
-"Vi ankaŭ povas enigi la IP-adreson de la prokura kluzo se via havas unu."
-
-#: network/netconnect.pm:1366
-#, c-format
-msgid "Last but not least you can also type in your DNS server IP addresses."
-msgstr ""
-
-#: network/netconnect.pm:1368 standalone/drakconnect:1032
-#, fuzzy, c-format
-msgid "Host name (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
-
-#: network/netconnect.pm:1368
-#, c-format
-msgid "Host name"
-msgstr "Poŝtejo"
-
-#: network/netconnect.pm:1370
-#, fuzzy, c-format
-msgid "DNS server 1"
-msgstr "DNA servilo"
-
-#: network/netconnect.pm:1371
-#, fuzzy, c-format
-msgid "DNS server 2"
-msgstr "DNA servilo"
-
-#: network/netconnect.pm:1372
-#, fuzzy, c-format
-msgid "DNS server 3"
-msgstr "DNA servilo"
-
-#: network/netconnect.pm:1373
-#, fuzzy, c-format
-msgid "Search domain"
-msgstr "NIS Domajno"
-
-#: network/netconnect.pm:1374
-#, c-format
-msgid "By default search domain will be set from the fully-qualified host name"
-msgstr ""
-
-#: network/netconnect.pm:1375
-#, c-format
-msgid "Gateway (e.g. %s)"
-msgstr ""
-
-#: network/netconnect.pm:1377
-#, c-format
-msgid "Gateway device"
-msgstr "Prokura kluzaparato"
-
-#: network/netconnect.pm:1386
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS-servila adreso devas esti en formato 1.2.3.4"
-
-#: network/netconnect.pm:1391 standalone/drakconnect:692
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP-adreso devus esti en la notacio 1.2.3.4"
-
-#: network/netconnect.pm:1404
-#, c-format
-msgid ""
-"If desired, enter a Zeroconf hostname.\n"
-"This is the name your machine will use to advertise any of\n"
-"its shared resources that are not managed by the network.\n"
-"It is not necessary on most networks."
-msgstr ""
-
-#: network/netconnect.pm:1408
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Poŝtejo"
-
-#: network/netconnect.pm:1411
-#, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
-
-#: network/netconnect.pm:1421
-#, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
-msgstr ""
-
-#: network/netconnect.pm:1423
-#, c-format
-msgid "Internet connection"
-msgstr "Interreta konekto"
-
-#: network/netconnect.pm:1432
-#, fuzzy, c-format
-msgid "Configuration is complete, do you want to apply settings?"
-msgstr "Kiun konfiguron de Xorg vi deziras havi?"
-
-#: network/netconnect.pm:1439
-#, fuzzy, c-format
-msgid "Do you want to allow users to start the connection?"
-msgstr "Ĉu vi deziras starti vian konektaĵon je startado de la sistemo?"
-
-#: network/netconnect.pm:1459
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Ĉu vi deziras starti vian konektaĵon je startado de la sistemo?"
-
-#: network/netconnect.pm:1478
-#, fuzzy, c-format
-msgid "Automatically at boot"
-msgstr "Startu ĉe starto"
-
-#: network/netconnect.pm:1480
-#, c-format
-msgid "By using Net Applet in the system tray"
-msgstr ""
-
-#: network/netconnect.pm:1482
-#, c-format
-msgid "Manually (the interface would still be activated at boot)"
-msgstr ""
-
-#: network/netconnect.pm:1491
-#, fuzzy, c-format
-msgid "How do you want to dial this connection?"
-msgstr "Ĉu vi deziras starti vian konektaĵon je startado de la sistemo?"
-
-#: network/netconnect.pm:1505
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it?"
-msgstr ""
-"La reto devas esti restartigita.\n"
-"Ĉu vi deziras restartigi ĝin?"
-
-#: network/netconnect.pm:1512 network/netconnect.pm:1583
-#, c-format
-msgid "Network Configuration"
-msgstr "Reta Konfiguraĵo"
-
-#: network/netconnect.pm:1513
-#, c-format
-msgid ""
-"A problem occurred while restarting the network: \n"
-"\n"
-"%s"
-msgstr ""
-"Problemo okazis dum restarto de la reto: \n"
-"\n"
-"%s"
-
-#: network/netconnect.pm:1522
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Ĉu vi deziras provi konekti al la interreto nun?"
-
-#: network/netconnect.pm:1530 standalone/drakconnect:1064
-#, c-format
-msgid "Testing your connection..."
-msgstr "Testante vian konektaĵon..."
-
-#: network/netconnect.pm:1550
-#, c-format
-msgid "The system is now connected to the Internet."
-msgstr "La sistemo estas nun konektita al Interreto."
-
-#: network/netconnect.pm:1551
-#, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr ""
-
-#: network/netconnect.pm:1552
-#, fuzzy, c-format
-msgid ""
-"The system does not seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr "Konektu al la Interreto / Konfiguru lokan Reton"
-
-#: network/netconnect.pm:1567
-#, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
-msgstr ""
-
-#: network/netconnect.pm:1570
-#, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-
-#: network/netconnect.pm:1571
-#, c-format
-msgid ""
-"Problems occurred during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection does not "
-"work, you might want to relaunch the configuration."
-msgstr ""
-
-#: network/netconnect.pm:1584
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-
-#: network/netconnect.pm:1622
-#, c-format
-msgid ""
-"An unexpected error has happened:\n"
-"%s"
-msgstr ""
-
-#: network/network.pm:316
-#, c-format
-msgid "Proxies configuration"
-msgstr "Konfigurado de prokuraj serviloj"
-
-#: network/network.pm:317
-#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP prokura servilo"
-
-#: network/network.pm:318
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP prokura servilo"
-
-#: network/network.pm:321
-#, c-format
-msgid "Proxy should be http://..."
-msgstr "Prokura servilo devus esti http://..."
-
-#: network/network.pm:322
-#, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL devas komenci per 'ftp:' aŭ 'http:'"
-
-#: network/shorewall.pm:25
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Konfiguraĵo de barilo detektata!"
-
-#: network/shorewall.pm:26
-#, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
-msgstr ""
-"Averto.  Ekzistanta konfiguraĵo de barilo detektata.  Vi eble devas permane\n"
-"fiksi ĝin poste de la instalado."
-
-#: network/shorewall.pm:89 standalone/drakgw:217 standalone/drakvpn:214
-#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
-msgstr ""
-
-#: network/tools.pm:190
-#, fuzzy, c-format
-msgid "Insert floppy"
-msgstr "Enŝovu disketon en %s"
-
-#: network/tools.pm:191
-#, fuzzy, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr "Enŝovu FAT-formatitan disketon en drajvo %s"
-
-#: network/tools.pm:196
-#, fuzzy, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "Kie vi deziras munti aparato %s?"
-
-#: partition_table.pm:397
-#, c-format
-msgid "mount failed: "
-msgstr "muntado malsukcesis: "
-
-#: partition_table.pm:502
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ĉi tiu platformo ne subtenas etendatajn subdiskojn"
-
-#: partition_table.pm:520
-#, c-format
-msgid ""
-"You have a hole in your partition table but I can not use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
-msgstr ""
-"Vi havas truon en via subdisktabelo sed mi ne povas uzi ĝin.\n"
-"La sola solvo estas movi viajn ĉefajn subdiskojn por situigi la truon\n"
-"apud la etendataj subdiskoj."
-
-#: partition_table.pm:611
-#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Restaŭris el dosiero %s malsukcesis: %s"
-
-#: partition_table.pm:613
-#, c-format
-msgid "Bad backup file"
-msgstr "Malbona rezerva dosiero"
-
-#: partition_table.pm:633
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: partition_table/raw.pm:249
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Io malbona okazas en via drajvo.\n"
-"Testo pri la integreco de datenoj malsukcesis.\n"
-"Tio signifas ke skribado al la disko finiĝos per difektitaj datenoj."
-
-#: pkgs.pm:23
-#, c-format
-msgid "must have"
-msgstr "havenda"
-
-#: pkgs.pm:24
-#, c-format
-msgid "important"
-msgstr "grava(j)"
-
-#: pkgs.pm:25
-#, c-format
-msgid "very nice"
-msgstr "tre agrabla(j)"
-
-#: pkgs.pm:26
-#, c-format
-msgid "nice"
-msgstr "agrabla(j)"
-
-#: pkgs.pm:27
-#, c-format
-msgid "maybe"
-msgstr "elbe"
-
-#: pkgs.pm:481
-#, fuzzy, c-format
-msgid "Downloading file %s..."
-msgstr "Konservu en dosiero"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on %s)"
-msgstr "(sur %s)"
-
-#: printer/cups.pm:103
-#, c-format
-msgid "(on this machine)"
-msgstr ""
-
-#: printer/cups.pm:115 standalone/printerdrake:187
-#, fuzzy, c-format
-msgid "Configured on other machines"
-msgstr "Konfiguru la konekton"
-
-#: printer/cups.pm:117
-#, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ĉe CUPS-servilo \"%s\""
-
-#: printer/cups.pm:117 printer/printerdrake.pm:4765
-#: printer/printerdrake.pm:4775 printer/printerdrake.pm:4920
-#: printer/printerdrake.pm:4931 printer/printerdrake.pm:5141
-#, c-format
-msgid " (Default)"
-msgstr " (Defaŭlta)"
-
-#: printer/data.pm:60
-#, c-format
-msgid "PDQ - Print, Do not Queue"
-msgstr ""
-
-#: printer/data.pm:61
-#, c-format
-msgid "PDQ"
-msgstr ""
-
-#: printer/data.pm:73
-#, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr ""
-
-#: printer/data.pm:74
-#, c-format
-msgid "LPD"
-msgstr ""
-
-#: printer/data.pm:95
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
-
-#: printer/data.pm:96
-#, c-format
-msgid "LPRng"
-msgstr ""
-
-#: printer/data.pm:121
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
-
-#: printer/data.pm:151
-#, c-format
-msgid "CUPS - Common Unix Printing System (remote server)"
-msgstr ""
-
-#: printer/data.pm:152
-#, c-format
-msgid "Remote CUPS"
-msgstr "Malproksima CUPS-o"
-
-#: printer/detect.pm:156 printer/detect.pm:239 printer/detect.pm:441
-#: printer/detect.pm:478
-#, c-format
-msgid "Unknown Model"
-msgstr "Nekonata modelo"
-
-#: printer/main.pm:27
-#, c-format
-msgid "Local printer"
-msgstr "Loka printilo"
-
-#: printer/main.pm:28
-#, c-format
-msgid "Remote printer"
-msgstr "Malproksima printilo"
-
-#: printer/main.pm:29
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Malproksima CUPS-a servila printilo"
-
-#: printer/main.pm:30 printer/printerdrake.pm:1150
-#: printer/printerdrake.pm:1695
-#, c-format
-msgid "Printer on remote lpd server"
-msgstr "Malproksimaj lpd servila printilo"
-
-#: printer/main.pm:31
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Reta Printilo (TCP/ingo)"
-
-#: printer/main.pm:32
-#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Vindozo 95/98/NT"
-
-#: printer/main.pm:33
-#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "Printservilo"
-
-#: printer/main.pm:34 printer/printerdrake.pm:1699
-#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "Printila Aparato URI"
-
-#: printer/main.pm:35
-#, c-format
-msgid "Pipe job into a command"
-msgstr ""
-
-#: printer/main.pm:45
-#, c-format
-msgid "recommended"
-msgstr "recomendita"
-
-#: printer/main.pm:329 printer/main.pm:634 printer/main.pm:1671
-#: printer/main.pm:2706 printer/main.pm:2715 printer/printerdrake.pm:910
-#: printer/printerdrake.pm:2182 printer/printerdrake.pm:5178
-#, c-format
-msgid "Unknown model"
-msgstr "Nekonata modelo"
-
-#: printer/main.pm:354 standalone/printerdrake:186
-#, fuzzy, c-format
-msgid "Configured on this machine"
-msgstr "Konfiguru la konekton"
-
-#: printer/main.pm:360 printer/printerdrake.pm:1239
-#, c-format
-msgid " on parallel port #%s"
-msgstr " sur paralela pordo #%s"
-
-#: printer/main.pm:363 printer/printerdrake.pm:1242
-#, c-format
-msgid ", USB printer #%s"
-msgstr ", USB-printilo #%s"
-
-#: printer/main.pm:365
-#, c-format
-msgid ", USB printer"
-msgstr ", USB-printilo"
-
-#: printer/main.pm:369
-#, c-format
-msgid ", HP printer on a parallel port"
-msgstr ", HP-printilo sur paralela pordo"
-
-#: printer/main.pm:371
-#, c-format
-msgid ", HP printer on USB"
-msgstr ", HP-printilo sur USB"
-
-#: printer/main.pm:373
-#, c-format
-msgid ", HP printer on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:375
-#, c-format
-msgid ", HP printer"
-msgstr ", HP-printilo"
-
-#: printer/main.pm:381
-#, c-format
-msgid ", multi-function device on parallel port #%s"
-msgstr ""
-
-#: printer/main.pm:384
-#, fuzzy, c-format
-msgid ", multi-function device on a parallel port"
-msgstr "Presilo sur paralela pordo #%s"
-
-#: printer/main.pm:386
-#, c-format
-msgid ", multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:388
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:390
-#, c-format
-msgid ", multi-function device"
-msgstr ""
-
-#: printer/main.pm:394
-#, c-format
-msgid ", printing to %s"
-msgstr ", presante sur %s"
-
-#: printer/main.pm:397
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " sur LPD-servilo \"%s\", printilo \"%s\""
-
-#: printer/main.pm:400
-#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: printer/main.pm:405
-#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
-
-#: printer/main.pm:410
-#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " sur Novell-servilo \"%s\", printilo \"%s\""
-
-#: printer/main.pm:413
-#, c-format
-msgid ", using command %s"
-msgstr ""
-
-#: printer/main.pm:428
-#, c-format
-msgid "Parallel port #%s"
-msgstr "Paralela pordo #%s"
-
-#: printer/main.pm:431 printer/printerdrake.pm:1260
-#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1305
-#, c-format
-msgid "USB printer #%s"
-msgstr "USB-printilo #%s"
-
-#: printer/main.pm:433
-#, c-format
-msgid "USB printer"
-msgstr "USB-printilo"
-
-#: printer/main.pm:437
-#, c-format
-msgid "HP printer on a parallel port"
-msgstr "HP-printilo sur paralela pordo"
-
-#: printer/main.pm:439
-#, c-format
-msgid "HP printer on USB"
-msgstr "HP-printilo sur USB"
-
-#: printer/main.pm:441
-#, c-format
-msgid "HP printer on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:443
-#, c-format
-msgid "HP printer"
-msgstr "HP-printilo"
-
-#: printer/main.pm:449
-#, fuzzy, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "Presilo sur paralela pordo #%s"
-
-#: printer/main.pm:452
-#, fuzzy, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "Presilo sur paralela pordo #%s"
-
-#: printer/main.pm:454
-#, c-format
-msgid "Multi-function device on USB"
-msgstr ""
-
-#: printer/main.pm:456
-#, c-format
-msgid "Multi-function device on HP JetDirect"
-msgstr ""
-
-#: printer/main.pm:458
-#, c-format
-msgid "Multi-function device"
-msgstr ""
-
-#: printer/main.pm:462
-#, c-format
-msgid "Prints into %s"
-msgstr "Presante sur %s"
-
-#: printer/main.pm:465
-#, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "LPD-servilo \"%s\", printilo \"%s\""
-
-#: printer/main.pm:468
-#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr ""
-
-#: printer/main.pm:473
-#, fuzzy, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "Presilo \"%s\" sur SMB/vindoza servilo \"%s\""
-
-#: printer/main.pm:478
-#, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "Novell-servilo \"%s\", printilo \"%s\""
-
-#: printer/main.pm:481
-#, fuzzy, c-format
-msgid "Uses command %s"
-msgstr "%s sur %s"
-
-#: printer/main.pm:483
-#, c-format
-msgid "URI: %s"
-msgstr "URL: %s"
-
-#: printer/main.pm:631 printer/printerdrake.pm:856
-#: printer/printerdrake.pm:2953
-#, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
-
-#: printer/main.pm:1181 printer/printerdrake.pm:211
-#: printer/printerdrake.pm:223
-#, c-format
-msgid "Local network(s)"
-msgstr "Loka(j) reto(j)"
-
-#: printer/main.pm:1183 printer/printerdrake.pm:227
-#, c-format
-msgid "Interface \"%s\""
-msgstr "Interfaco \"%s\""
-
-#: printer/main.pm:1185
-#, c-format
-msgid "Network %s"
-msgstr "Reto %s"
-
-#: printer/main.pm:1187
-#, c-format
-msgid "Host %s"
-msgstr "Gastiganto %s"
-
-#: printer/main.pm:1216
-#, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Pordo%s)"
-
-#: printer/printerdrake.pm:24
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:67
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:68
-#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: printer/printerdrake.pm:69
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:72
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
-
-#: printer/printerdrake.pm:77
-#, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
-
-#: printer/printerdrake.pm:82
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Printilo"
-
-#: printer/printerdrake.pm:84
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:89 standalone/scannerdrake:593
-#: standalone/scannerdrake:610
-#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Malproksima printilo"
-
-#: printer/printerdrake.pm:100
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP de SMB servilo"
-
-#: printer/printerdrake.pm:107
-#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: printer/printerdrake.pm:115
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Konfiguru retumon"
-
-#: printer/printerdrake.pm:116
-#, c-format
-msgid ""
-"Turning on this allows to print plain text files in Japanese language. Only "
-"use this function if you really want to print text in Japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print Japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: printer/printerdrake.pm:123
-#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Post-instala konfigurado"
-
-#: printer/printerdrake.pm:125
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
-
-#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
-#: printer/printerdrake.pm:4401
-#, c-format
-msgid "Remote CUPS server and no local CUPS daemon"
-msgstr ""
-
-#: printer/printerdrake.pm:141
-#, c-format
-msgid "On"
-msgstr "Ŝaltita"
-
-#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
-#: printer/printerdrake.pm:525
-#, c-format
-msgid "Off"
-msgstr "Malŝaltita"
-
-#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
-#, c-format
-msgid ""
-"In this mode the local CUPS daemon will be stopped and all printing requests "
-"go directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
-#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Loka printilo"
-
-#: printer/printerdrake.pm:162
-#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-
-#: printer/printerdrake.pm:173
-#, c-format
-msgid "Add host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:179
-#, c-format
-msgid "Edit selected host/network"
-msgstr ""
-
-#: printer/printerdrake.pm:188
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Malinstalu printvicon"
-
-#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
-#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
-#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
-#, c-format
-msgid "IP address of host/network:"
-msgstr ""
-
-#: printer/printerdrake.pm:237
-#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr ""
-
-#: printer/printerdrake.pm:244
-#, c-format
-msgid "Host/network IP address missing."
-msgstr ""
-
-#: printer/printerdrake.pm:252
-#, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
-#, c-format
-msgid "Examples for correct IPs:\n"
-msgstr ""
-
-#: printer/printerdrake.pm:277
-#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Malproksima CUPS-a servilo"
-
-#: printer/printerdrake.pm:347
-#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-
-#: printer/printerdrake.pm:358
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Aldonu uzanto"
-
-#: printer/printerdrake.pm:364
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "Malinstalu printvicon"
-
-#: printer/printerdrake.pm:373
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Malinstalu printvicon"
-
-#: printer/printerdrake.pm:417
-#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: printer/printerdrake.pm:418
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
-
-#: printer/printerdrake.pm:422
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Printilaj Poŝtejo"
-
-#: printer/printerdrake.pm:428
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Ĉu tio ĉi pravas?"
-
-#: printer/printerdrake.pm:440 printer/printerdrake.pm:1924
-#, c-format
-msgid "The port number should be an integer!"
-msgstr ""
-
-#: printer/printerdrake.pm:451
-#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:462 printer/printerdrake.pm:1951
-#: standalone/drakups:251 standalone/harddrake2:51
-#, c-format
-msgid "Port"
-msgstr "Pordo"
-
-#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
-#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
-#: printer/printerdrake.pm:536
-#, fuzzy, c-format
-msgid "On, Name or IP of remote server:"
-msgstr "Malproksimaj lpd servilo"
-
-#: printer/printerdrake.pm:514 printer/printerdrake.pm:4410
-#: printer/printerdrake.pm:4476
-#, fuzzy, c-format
-msgid "CUPS server name or IP address missing."
-msgstr "Printilaj Poŝtejo"
-
-#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
-#: printer/printerdrake.pm:680 printer/printerdrake.pm:746
-#: printer/printerdrake.pm:773 printer/printerdrake.pm:832
-#: printer/printerdrake.pm:874 printer/printerdrake.pm:884
-#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2225
-#: printer/printerdrake.pm:2257 printer/printerdrake.pm:2305
-#: printer/printerdrake.pm:2357 printer/printerdrake.pm:2374
-#: printer/printerdrake.pm:2418 printer/printerdrake.pm:2458
-#: printer/printerdrake.pm:2508 printer/printerdrake.pm:2542
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2804
-#: printer/printerdrake.pm:2809 printer/printerdrake.pm:2948
-#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3656
-#: printer/printerdrake.pm:3722 printer/printerdrake.pm:3771
-#: printer/printerdrake.pm:3774 printer/printerdrake.pm:3906
-#: printer/printerdrake.pm:4007 printer/printerdrake.pm:4079
-#: printer/printerdrake.pm:4100 printer/printerdrake.pm:4110
-#: printer/printerdrake.pm:4205 printer/printerdrake.pm:4300
-#: printer/printerdrake.pm:4306 printer/printerdrake.pm:4330
-#: printer/printerdrake.pm:4437 printer/printerdrake.pm:4546
-#: printer/printerdrake.pm:4566 printer/printerdrake.pm:4575
-#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4788
-#: printer/printerdrake.pm:5240 printer/printerdrake.pm:5317
-#: standalone/printerdrake:67 standalone/printerdrake:554
-#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Printilo"
-
-#: printer/printerdrake.pm:567 printer/printerdrake.pm:4008
-#: printer/printerdrake.pm:4547
-#, fuzzy, c-format
-msgid "Reading printer data..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: printer/printerdrake.pm:587
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "limigu"
-
-#: printer/printerdrake.pm:614 printer/printerdrake.pm:634
-#, c-format
-msgid "Select Printer Connection"
-msgstr "Elektu Printilan Konekton"
-
-#: printer/printerdrake.pm:615
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Kiel estas la printilo konektata?"
-
-#: printer/printerdrake.pm:617
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
-msgstr ""
-"Kun malproksima CUPS servilo, vi ne devas konfiguri iun printilon\n"
-"ĉi tie; printiloj estos aŭtomate dektektataj.  Se vi havas dubojn,\n"
-"elektu \"Malproksima CUPS servilo\"."
-
-#: printer/printerdrake.pm:620 printer/printerdrake.pm:4790
-#, c-format
-msgid ""
-"\n"
-"WARNING: No local network connection active, remote printers can neither be "
-"detected nor tested!"
-msgstr ""
-
-#: printer/printerdrake.pm:627
-#, c-format
-msgid ""
-"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
-msgstr ""
-
-#: printer/printerdrake.pm:629
-#, c-format
-msgid "Modify timeout for network printer auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:635
-#, c-format
-msgid "Enter the timeout for network printer auto-detection (in msec) here. "
-msgstr ""
-
-#: printer/printerdrake.pm:637
-#, c-format
-msgid ""
-"The longer you choose the timeout, the more reliable the detections of "
-"network printers will be, but the scan can take longer then, especially if "
-"there are many machines with local firewalls in the network. "
-msgstr ""
-
-#: printer/printerdrake.pm:641
-#, c-format
-msgid "The timeout must be a positive integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:680
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: printer/printerdrake.pm:697
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Neniu printilo"
-
-#: printer/printerdrake.pm:699
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Neniu printilo"
-
-#: printer/printerdrake.pm:703
-#, fuzzy, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: printer/printerdrake.pm:705
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: printer/printerdrake.pm:706
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: printer/printerdrake.pm:710
-#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:711
-#, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-
-#: printer/printerdrake.pm:714
-#, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
-
-#: printer/printerdrake.pm:717
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: printer/printerdrake.pm:730
-#, c-format
-msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:731
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Ĉu vi deziras provi printado?"
-
-#: printer/printerdrake.pm:733
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Ĉu vi deziras starti vian konektaĵon je startado de la sistemo?"
-
-#: printer/printerdrake.pm:734
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr ""
-
-#: printer/printerdrake.pm:735
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
-
-#: printer/printerdrake.pm:774
-#, fuzzy, c-format
-msgid "Searching for new printers..."
-msgstr "Loka printilo"
-
-#: printer/printerdrake.pm:833
-#, fuzzy, c-format
-msgid "Found printer on %s..."
-msgstr "Foriganta presilon \"%s\"..."
-
-#: printer/printerdrake.pm:858
-#, c-format
-msgid "("
-msgstr "("
-
-#: printer/printerdrake.pm:859
-#, c-format
-msgid " on "
-msgstr ""
-
-#: printer/printerdrake.pm:860 standalone/scannerdrake:137
-#, c-format
-msgid ")"
-msgstr ")"
-
-#: printer/printerdrake.pm:865 printer/printerdrake.pm:2960
-#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Printilan Konekton"
-
-#: printer/printerdrake.pm:866 printer/printerdrake.pm:2961
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "Kiun specon de printilo vi havas?"
-
-#: printer/printerdrake.pm:867
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: printer/printerdrake.pm:870 printer/printerdrake.pm:2966
-#, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
-
-#: printer/printerdrake.pm:875
-#, fuzzy, c-format
-msgid "Configuring printer on %s..."
-msgstr "Mi konfiguras printilon \"%s\"..."
-
-#: printer/printerdrake.pm:885 printer/printerdrake.pm:4567
-#, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Mi konfiguras printilon \"%s\"..."
-
-#: printer/printerdrake.pm:1051 printer/printerdrake.pm:1063
-#: printer/printerdrake.pm:1170 printer/printerdrake.pm:2191
-#: printer/printerdrake.pm:2206 printer/printerdrake.pm:2276
-#: printer/printerdrake.pm:4807 printer/printerdrake.pm:4977
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Neniu printilo"
-
-#: printer/printerdrake.pm:1052
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
-msgstr ""
-
-#: printer/printerdrake.pm:1065
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you do not "
-"need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1074
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1082
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you do not need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1091
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-
-#: printer/printerdrake.pm:1142
-#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Malproksima printilo"
-
-#: printer/printerdrake.pm:1145
-#, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr ""
-
-#: printer/printerdrake.pm:1148
-#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
-
-#: printer/printerdrake.pm:1151
-#, fuzzy, c-format
-msgid "No auto-detection"
-msgstr "Memdetekta"
-
-#: printer/printerdrake.pm:1171
-#, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
-msgstr ""
-
-#: printer/printerdrake.pm:1207 printer/printerdrake.pm:1437
-#: printer/printerdrake.pm:1500 printer/printerdrake.pm:1592
-#: printer/printerdrake.pm:1730 printer/printerdrake.pm:1806
-#: printer/printerdrake.pm:1968 printer/printerdrake.pm:2061
-#: printer/printerdrake.pm:2070 printer/printerdrake.pm:2079
-#: printer/printerdrake.pm:2090 printer/printerdrake.pm:2231
-#: printer/printerdrake.pm:2317 printer/printerdrake.pm:2363
-#: printer/printerdrake.pm:2430 printer/printerdrake.pm:2465
-#, fuzzy, c-format
-msgid "Could not install the %s packages!"
-msgstr "Instalanta pakaĵo %s"
-
-#: printer/printerdrake.pm:1209
-#, c-format
-msgid "Skipping Windows/SMB server auto-detection"
-msgstr ""
-
-#: printer/printerdrake.pm:1215 printer/printerdrake.pm:1360
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Malproksima printilo"
-
-#: printer/printerdrake.pm:1215
-#, c-format
-msgid "Detecting devices..."
-msgstr "Detektas aparatojn..."
-
-#: printer/printerdrake.pm:1245
-#, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1248
-#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Vindozo 95/98/NT"
-
-#: printer/printerdrake.pm:1252
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Duobla surmetingo %s"
-
-#: printer/printerdrake.pm:1257 printer/printerdrake.pm:1284
-#: printer/printerdrake.pm:1302
-#, c-format
-msgid "Printer on parallel port #%s"
-msgstr "Presilo sur paralela pordo #%s"
-
-#: printer/printerdrake.pm:1263
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Reta Printilo (TCP/ingo)"
-
-#: printer/printerdrake.pm:1266
-#, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Presilo \"%s\" sur SMB/vindoza servilo \"%s\""
-
-#: printer/printerdrake.pm:1347
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Loka printilo"
-
-#: printer/printerdrake.pm:1348
-#, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1352
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Printila Aparato URI"
-
-#: printer/printerdrake.pm:1361
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Loka printilo"
-
-#: printer/printerdrake.pm:1369
-#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Loka printilo"
-
-#: printer/printerdrake.pm:1370
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Loka printilo"
-
-#: printer/printerdrake.pm:1374 printer/printerdrake.pm:1383
-#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "La sekvaj pakaĵoj estos malinstalataj"
-
-#: printer/printerdrake.pm:1376
-#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1377
-#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1378 printer/printerdrake.pm:1387
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
-
-#: printer/printerdrake.pm:1380
-#, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1381
-#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1385
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1386
-#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
-
-#: printer/printerdrake.pm:1389
-#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
-msgstr ""
-
-#: printer/printerdrake.pm:1390
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: printer/printerdrake.pm:1392
-#, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-
-#: printer/printerdrake.pm:1393
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: printer/printerdrake.pm:1395
-#, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
-msgstr ""
-
-#: printer/printerdrake.pm:1399
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Printila Aparato URI"
-
-#: printer/printerdrake.pm:1439 printer/printerdrake.pm:1502
-#: printer/printerdrake.pm:1594 printer/printerdrake.pm:1732
-#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1970
-#: printer/printerdrake.pm:2063 printer/printerdrake.pm:2072
-#: printer/printerdrake.pm:2081 printer/printerdrake.pm:2092
-#, fuzzy, c-format
-msgid "Aborting"
-msgstr "Ĉesigu"
-
-#: printer/printerdrake.pm:1475
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: printer/printerdrake.pm:1476
-#, fuzzy, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
-msgstr ""
-"Por uzi malproksima lpd printvico, vi devas provizi la poŝtejon de la\n"
-"printservilo kaj la printviconomon ĉe tiu servilo en kiun taskoj devus\n"
-"esti metata."
-
-#: printer/printerdrake.pm:1477
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "Malproksima poŝtejo"
-
-#: printer/printerdrake.pm:1478
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "Malproksima printilo"
-
-#: printer/printerdrake.pm:1481
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "Malproksima poŝtejo"
-
-#: printer/printerdrake.pm:1485
-#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Malproksima poŝtejo"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111 standalone/drakTermServ:446
-#: standalone/drakTermServ:766 standalone/drakTermServ:782
-#: standalone/drakTermServ:1521 standalone/drakTermServ:1530
-#: standalone/drakTermServ:1542 standalone/drakbackup:499
-#: standalone/drakbackup:605 standalone/drakbackup:640
-#: standalone/drakbackup:741 standalone/drakroam:390 standalone/harddrake2:257
-#, c-format
-msgid "Information"
-msgstr "Informo"
-
-#: printer/printerdrake.pm:1515 printer/printerdrake.pm:1986
-#: printer/printerdrake.pm:2111
-#, c-format
-msgid "Detected model: %s %s"
-msgstr "Mi detektis modelon: %s %s"
-
-#: printer/printerdrake.pm:1598 printer/printerdrake.pm:1855
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Startas vian konektaĵon..."
-
-#: printer/printerdrake.pm:1610 printer/printerdrake.pm:1631
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ""
-
-#: printer/printerdrake.pm:1613 printer/printerdrake.pm:1634
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Presilo \"%s\" en servilo \"%s\""
-
-#: printer/printerdrake.pm:1655
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Vindozo 9x/NT) Printilaj Opcioj"
-
-#: printer/printerdrake.pm:1656
-#, fuzzy, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
-msgstr ""
-"Por printi al SMB-a printilo, vi devas provizi la SMB poŝtejon (Notu! Ĝi "
-"eble\n"
-"estas malsama de ĝia TCP/IP nomo!) kaj eble la IP-adreson de la "
-"printservilo,\n"
-"aldone al la opuzan nomon de la printilo vi deziras atingi kaj iun ajn\n"
-"taŭgan salutnomon, pasvorton, kaj laborgrupan informon."
-
-#: printer/printerdrake.pm:1657
-#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-
-#: printer/printerdrake.pm:1659
-#, c-format
-msgid "SMB server host"
-msgstr "Poŝtejo de SMB servilo"
-
-#: printer/printerdrake.pm:1660
-#, c-format
-msgid "SMB server IP"
-msgstr "IP de SMB servilo"
-
-#: printer/printerdrake.pm:1661
-#, c-format
-msgid "Share name"
-msgstr "Opuza nomo"
-
-#: printer/printerdrake.pm:1664
-#, c-format
-msgid "Workgroup"
-msgstr "Laborgrupo"
-
-#: printer/printerdrake.pm:1666
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Malproksima printilo"
-
-#: printer/printerdrake.pm:1676
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr ""
-
-#: printer/printerdrake.pm:1680
-#, c-format
-msgid "Samba share name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1686
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
-
-#: printer/printerdrake.pm:1687
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1697
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:1700
-#, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-
-#: printer/printerdrake.pm:1779
-#, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare Printilaj Opcioj"
-
-#: printer/printerdrake.pm:1780
-#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Por print al NetWare printilo, vi devas provizi la NetWare printservilan\n"
-"nomon (Notu! Ĝi eble estas malsama de ĝia TCP/IP nomo!) aldone al la\n"
-"printvican nomon por la printilo vi deziras atingi kaj iun ajn taŭgan\n"
-"salutnomon kaj pasvorton."
-
-#: printer/printerdrake.pm:1781
-#, c-format
-msgid "Printer Server"
-msgstr "Printservilo"
-
-#: printer/printerdrake.pm:1782
-#, c-format
-msgid "Print Queue Name"
-msgstr "Printvica Nomo"
-
-#: printer/printerdrake.pm:1787
-#, c-format
-msgid "NCP server name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1791
-#, c-format
-msgid "NCP queue name missing!"
-msgstr ""
-
-#: printer/printerdrake.pm:1867 printer/printerdrake.pm:1888
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1870 printer/printerdrake.pm:1891
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr ""
-
-#: printer/printerdrake.pm:1913
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Ing-Printilaj Opcioj"
-
-#: printer/printerdrake.pm:1915
-#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
-msgstr ""
-
-#: printer/printerdrake.pm:1916
-#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Por printi al inga printilo, vi bezonas provizi la\n"
-"poŝtejon de la printilo kaj opcie la pordnumeron."
-
-#: printer/printerdrake.pm:1920
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Printilaj Poŝtejo"
-
-#: printer/printerdrake.pm:1949
-#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Printilaj Poŝtejo"
-
-#: printer/printerdrake.pm:2012
-#, fuzzy, c-format
-msgid "Refreshing Device URI list..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: printer/printerdrake.pm:2015 printer/printerdrake.pm:2017
-#, c-format
-msgid "Printer Device URI"
-msgstr "Printila Aparato URI"
-
-#: printer/printerdrake.pm:2016
-#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-
-#: printer/printerdrake.pm:2042
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2147
-#, c-format
-msgid "Pipe into command"
-msgstr ""
-
-#: printer/printerdrake.pm:2148
-#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-
-#: printer/printerdrake.pm:2149
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Domajna nomo"
-
-#: printer/printerdrake.pm:2153
-#, c-format
-msgid "A command line must be entered!"
-msgstr ""
-
-#: printer/printerdrake.pm:2192
-#, c-format
-msgid ""
-"On many HP printers there are special functions available, maintenance (ink "
-"level checking, nozzle cleaning. head alignment, ...) on all not too old "
-"inkjets, scanning on multi-function devices, and memory card access on "
-"printers with card readers. "
-msgstr ""
-
-#: printer/printerdrake.pm:2194
-#, c-format
-msgid ""
-"To access these extra functions on your HP printer, it must be set up with "
-"the appropriate software: "
-msgstr ""
-
-#: printer/printerdrake.pm:2195
-#, c-format
-msgid ""
-"Either with the newer HPLIP which allows printer maintenance through the "
-"easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
-"newer PhotoSmart models "
-msgstr ""
-
-#: printer/printerdrake.pm:2196
-#, c-format
-msgid ""
-"or with the older HPOJ which allows only scanner and memory card access, but "
-"could help you in case of failure of HPLIP. "
-msgstr ""
-
-#: printer/printerdrake.pm:2198
-#, c-format
-msgid "What is your choice (choose \"None\" for non-HP printers)? "
-msgstr ""
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2200
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2232
-#: printer/printerdrake.pm:2258
-#, c-format
-msgid "HPLIP"
-msgstr "HPLIP"
-
-#: printer/printerdrake.pm:2199 printer/printerdrake.pm:2202
-#: printer/printerdrake.pm:2358 printer/printerdrake.pm:2364
-#: printer/printerdrake.pm:2375
-#, c-format
-msgid "HPOJ"
-msgstr "HPOJ"
-
-#: printer/printerdrake.pm:2207
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony "
-"IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-
-#: printer/printerdrake.pm:2226 printer/printerdrake.pm:2358
-#, c-format
-msgid "Installing %s package..."
-msgstr "Instalanta pakaĵon %s..."
-
-#: printer/printerdrake.pm:2233 printer/printerdrake.pm:2365
-#, c-format
-msgid "Only printing will be possible on the %s."
-msgstr ""
-
-#: printer/printerdrake.pm:2248
-#, fuzzy, c-format
-msgid "Could not remove your old HPOJ configuration file %s for your %s! "
-msgstr "Ne eblis sekurigi agordodosieron.\n"
-
-#: printer/printerdrake.pm:2250
-#, c-format
-msgid "Please remove the file manually and restart HPOJ."
-msgstr ""
-
-#: printer/printerdrake.pm:2258 printer/printerdrake.pm:2375
-#, c-format
-msgid "Checking device and configuring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:2277
-#, fuzzy, c-format
-msgid "Which printer do you want to set up with HPLIP?"
-msgstr "Al kiu sektoro vi deziras movi?"
-
-#: printer/printerdrake.pm:2306 printer/printerdrake.pm:2419
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Instalanta pakaĵojn SANE..."
-
-#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2432
-#, c-format
-msgid "Scanning on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2334
-#, c-format
-msgid "Using and Maintaining your %s"
-msgstr ""
-
-#: printer/printerdrake.pm:2459
-#, c-format
-msgid "Installing mtools packages..."
-msgstr "Instalanta pakaĵojn mtools..."
-
-#: printer/printerdrake.pm:2467
-#, c-format
-msgid "Photo memory card access on the %s will not be possible."
-msgstr ""
-
-#: printer/printerdrake.pm:2483
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2492
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
-
-#: printer/printerdrake.pm:2509
-#, fuzzy, c-format
-msgid "Configuring device..."
-msgstr "Mi konfiguras..."
-
-#: printer/printerdrake.pm:2543
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
-
-#: printer/printerdrake.pm:2552 printer/printerdrake.pm:2805
-#: printer/printerdrake.pm:2949
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: printer/printerdrake.pm:2763
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
-
-#: printer/printerdrake.pm:2767 printer/printerdrake.pm:4064
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
-
-#: printer/printerdrake.pm:2773 printer/printerdrake.pm:4069
-#, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
-#: printer/printerdrake.pm:2780
-#, c-format
-msgid ""
-"The printer name \"%s\" has more than 12 characters which can make the "
-"printer unaccessible from Windows clients. Do you really want to use this "
-"name?"
-msgstr ""
-
-#: printer/printerdrake.pm:2789
-#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
-#: printer/printerdrake.pm:2790
-#, c-format
-msgid "Name of printer"
-msgstr "Nomo de printilo"
-
-#: printer/printerdrake.pm:2791 standalone/drakconnect:603
-#: standalone/harddrake2:38 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Description"
-msgstr "Priskribo"
-
-#: printer/printerdrake.pm:2792 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "Location"
-msgstr "Loko"
-
-#: printer/printerdrake.pm:2810
-#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: printer/printerdrake.pm:2927
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Malproksima printilo"
-
-#: printer/printerdrake.pm:2928
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
-#: printer/printerdrake.pm:2933 printer/printerdrake.pm:2936
-#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Ĉu tio ĉi pravas?"
-
-#: printer/printerdrake.pm:2934 printer/printerdrake.pm:2935
-#: printer/printerdrake.pm:2938
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Malproksima printilo"
-
-#: printer/printerdrake.pm:2962
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-
-#: printer/printerdrake.pm:2981
-#, c-format
-msgid "Install a manufacturer-supplied PPD file"
-msgstr ""
-
-#: printer/printerdrake.pm:3013
-#, c-format
-msgid ""
-"Every PostScript printer is delivered with a PPD file which describes the "
-"printer's options and features."
-msgstr ""
-
-#: printer/printerdrake.pm:3014
-#, c-format
-msgid ""
-"This file is usually somewhere on the CD with the Windows and Mac drivers "
-"delivered with the printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3015
-#, c-format
-msgid "You can find the PPD files also on the manufacturer's web sites."
-msgstr ""
-
-#: printer/printerdrake.pm:3016
-#, c-format
-msgid ""
-"If you have Windows installed on your machine, you can find the PPD file on "
-"your Windows partition, too."
-msgstr ""
-
-#: printer/printerdrake.pm:3017
-#, c-format
-msgid ""
-"Installing the printer's PPD file and using it when setting up the printer "
-"makes all options of the printer available which are provided by the "
-"printer's hardware"
-msgstr ""
-
-#: printer/printerdrake.pm:3018
-#, c-format
-msgid ""
-"Here you can choose the PPD file to be installed on your machine, it will "
-"then be used for the setup of your printer."
-msgstr ""
-
-#: printer/printerdrake.pm:3020
-#, fuzzy, c-format
-msgid "Install PPD file from"
-msgstr "Instalu rpm"
-
-#: printer/printerdrake.pm:3023 printer/printerdrake.pm:3031
-#: standalone/scannerdrake:183 standalone/scannerdrake:192
-#: standalone/scannerdrake:242 standalone/scannerdrake:250
-#, fuzzy, c-format
-msgid "Floppy Disk"
-msgstr "Disketo"
-
-#: printer/printerdrake.pm:3024 printer/printerdrake.pm:3033
-#: standalone/scannerdrake:184 standalone/scannerdrake:194
-#: standalone/scannerdrake:243 standalone/scannerdrake:252
-#, fuzzy, c-format
-msgid "Other place"
-msgstr "Aliaj pordoj"
-
-#: printer/printerdrake.pm:3039
-#, fuzzy, c-format
-msgid "Select PPD file"
-msgstr "Elektu dosieron"
-
-#: printer/printerdrake.pm:3043
-#, c-format
-msgid "The PPD file %s does not exist or is unreadable!"
-msgstr ""
-
-#: printer/printerdrake.pm:3049
-#, c-format
-msgid "The PPD file %s does not conform with the PPD specifications!"
-msgstr ""
-
-#: printer/printerdrake.pm:3060
-#, fuzzy, c-format
-msgid "Installing PPD file..."
-msgstr "Instalanta pakaĵo %s"
-
-#: printer/printerdrake.pm:3178
-#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:3179
-#, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
-msgstr ""
-
-#: printer/printerdrake.pm:3204 printer/printerdrake.pm:3234
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:3205
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-
-#: printer/printerdrake.pm:3235
-#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
-msgstr ""
-
-#: printer/printerdrake.pm:3245
-#, fuzzy, c-format
-msgid "Lexmark X125 configuration"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:3246
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected via "
-"USB, no printers on remote machines or print server boxes. Please connect "
-"your printer to a local USB port or configure it on the machine where it is "
-"connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3268
-#, fuzzy, c-format
-msgid "Samsung ML/QL-85G configuration"
-msgstr "Son-konfigurado"
-
-#: printer/printerdrake.pm:3269 printer/printerdrake.pm:3296
-#, c-format
-msgid ""
-"The driver for this printer only supports printers locally connected on the "
-"first parallel port, no printers on remote machines or print server boxes or "
-"on other parallel ports. Please connect your printer to the first parallel "
-"port or configure it on the machine where it is connected to."
-msgstr ""
-
-#: printer/printerdrake.pm:3295
-#, fuzzy, c-format
-msgid "Canon LBP-460/660 configuration"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:3314
-#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
-
-#: printer/printerdrake.pm:3464
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-
-#: printer/printerdrake.pm:3589
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Printilan Konekton"
-
-#: printer/printerdrake.pm:3596
-#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3600
-#, c-format
-msgid "Option %s must be a number!"
-msgstr ""
-
-#: printer/printerdrake.pm:3604
-#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: printer/printerdrake.pm:3656
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Ĉu vi deziras konfiguri tiun ĉi presilon (\"%s\")\n"
-"kiel defaŭltan presilon?"
-
-#: printer/printerdrake.pm:3672
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Provu pordojn"
-
-#: printer/printerdrake.pm:3673
-#, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-
-#: printer/printerdrake.pm:3677
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "Jes, printu ambaŭ de la provpaĝojn"
-
-#: printer/printerdrake.pm:3678
-#, c-format
-msgid "Print"
-msgstr "Preso"
-
-#: printer/printerdrake.pm:3703
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "Laŭnorma"
-
-#: printer/printerdrake.pm:3706
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr ""
-
-#: printer/printerdrake.pm:3709
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "Printas provpaĝo(j)n..."
-
-#: printer/printerdrake.pm:3711
-#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "Printas provpaĝo(j)n..."
-
-#: printer/printerdrake.pm:3715
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Printas provpaĝo(j)n..."
-
-#: printer/printerdrake.pm:3723 printer/printerdrake.pm:3907
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Printas provpaĝo(j)n..."
-
-#: printer/printerdrake.pm:3743
-#, fuzzy, c-format
-msgid "Skipping photo test page."
-msgstr "Printas provpaĝo(j)n..."
-
-#: printer/printerdrake.pm:3760
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"Provpaĝo(j)n estis sendataj al la printila demono.\n"
-"Ĉi tiu eble postulas iom da tempo antaŭ ol la printilo komencas.\n"
-"Printada stato:\n"
-"%s\n"
-"\n"
-"Ĉu ĝi ĝuste funkcias?"
-
-#: printer/printerdrake.pm:3764
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Provpaĝo(j)n estis sendataj al la printila demono.\n"
-"Ĉi tiu eble postulas iom da tempo antaŭ ol la printilo komencas.\n"
-"Ĉu ĝi ĝuste funkcias?"
-
-#: printer/printerdrake.pm:3774
-#, c-format
-msgid "Did it work properly?"
-msgstr ""
-
-#: printer/printerdrake.pm:3798 printer/printerdrake.pm:5179
-#, c-format
-msgid "Raw printer"
-msgstr "Kruda presilo"
-
-#: printer/printerdrake.pm:3836
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3838
-#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3841 printer/printerdrake.pm:3858
-#: printer/printerdrake.pm:3868
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-
-#: printer/printerdrake.pm:3844 printer/printerdrake.pm:3884
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3848
-#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3853 printer/printerdrake.pm:3863
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3855 printer/printerdrake.pm:3865
-#: printer/printerdrake.pm:3875
-#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3860 printer/printerdrake.pm:3870
-#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-
-#: printer/printerdrake.pm:3873
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3877
-#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3881
-#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3891
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Presanta/skananta foton karton per \"%s\""
-
-#: printer/printerdrake.pm:3892
-#, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Presanta/skananta per \"%s\""
-
-#: printer/printerdrake.pm:3894
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Haltas de la reto"
-
-#: printer/printerdrake.pm:3896
-#, fuzzy, c-format
-msgid "Using/Maintaining the printer \"%s\""
-msgstr "Presanta per presilo \"%s\""
-
-#: printer/printerdrake.pm:3897
-#, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Presanta per presilo \"%s\""
-
-#: printer/printerdrake.pm:3903
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Printilaj opcioj"
-
-#: printer/printerdrake.pm:3925
-#, c-format
-msgid ""
-"Your %s is set up with HP's HPLIP driver software. This way many special "
-"features of your printer are supported.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3928
-#, c-format
-msgid ""
-"The scanner in your printer can be used with the usual SANE software, for "
-"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
-msgstr ""
-
-#: printer/printerdrake.pm:3929
-#, c-format
-msgid ""
-"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
-"share your scanner on the network.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3933
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed like a usual USB "
-"mass storage device. "
-msgstr ""
-
-#: printer/printerdrake.pm:3934
-#, c-format
-msgid ""
-"After inserting a card a hard disk icon to access the card should appear on "
-"your desktop.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3936
-#, c-format
-msgid ""
-"The memory card readers in your printer can be accessed using HP's Printer "
-"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
-"Photo Cards...\" button on the \"Functions\" tab. "
-msgstr ""
-
-#: printer/printerdrake.pm:3937
-#, c-format
-msgid ""
-"Note that this is very slow, reading the pictures from the camera or a USB "
-"card reader is usually faster.\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3940
-#, c-format
-msgid ""
-"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
-"lot of status monitoring and maintenance functions for your %s:\n"
-"\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3941
-#, c-format
-msgid " - Ink level/status info\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3942
-#, c-format
-msgid " - Ink nozzle cleaning\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3943
-#, c-format
-msgid " - Print head alignment\n"
-msgstr ""
-
-#: printer/printerdrake.pm:3944
-#, fuzzy, c-format
-msgid " - Color calibration\n"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:3959
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"You do not need to run \"scannerdrake\" for setting up scanning on this "
-"device, you only need to use \"scannerdrake\" if you want to share the "
-"scanner on the network."
-msgstr ""
-
-#: printer/printerdrake.pm:3985
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-
-#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4055
-#: printer/printerdrake.pm:4090
-#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:4029
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4032
-#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4034
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4036
-#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
-
-#: printer/printerdrake.pm:4038
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4039
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-
-#: printer/printerdrake.pm:4040
-#, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: printer/printerdrake.pm:4043
-#, c-format
-msgid "Do not transfer printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4044 printer/printerdrake.pm:4060
-#, c-format
-msgid "Transfer"
-msgstr ""
-
-#: printer/printerdrake.pm:4056
-#, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
-#: printer/printerdrake.pm:4077
-#, fuzzy, c-format
-msgid "New printer name"
-msgstr "Neniu printilo"
-
-#: printer/printerdrake.pm:4080
-#, c-format
-msgid "Transferring %s..."
-msgstr ""
-
-#: printer/printerdrake.pm:4091
-#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
-
-#: printer/printerdrake.pm:4101
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Legas datumbason de CUPS peliloj..."
-
-#: printer/printerdrake.pm:4111
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Startas vian konektaĵon..."
-
-#: printer/printerdrake.pm:4155 printer/printerdrake.pm:4159
-#: printer/printerdrake.pm:4161
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Konfiguru retumon"
-
-#: printer/printerdrake.pm:4156
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: printer/printerdrake.pm:4157
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-
-#: printer/printerdrake.pm:4160
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Konfiguras reto"
-
-#: printer/printerdrake.pm:4195
-#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessible after booting your "
-"system and correct the configuration using the %s Control Center, section "
-"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
-"also using the %s Control Center, section \"Hardware\"/\"Printer\""
-msgstr ""
-
-#: printer/printerdrake.pm:4196
-#, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
-
-#: printer/printerdrake.pm:4206
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: printer/printerdrake.pm:4237
-#, fuzzy, c-format
-msgid "high"
-msgstr "Alta"
-
-#: printer/printerdrake.pm:4237
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paranoja"
-
-#: printer/printerdrake.pm:4239
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
-
-#: printer/printerdrake.pm:4240
-#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessible by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4276
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: printer/printerdrake.pm:4277
-#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: printer/printerdrake.pm:4300
-#, c-format
-msgid "Checking installed software..."
-msgstr ""
-
-#: printer/printerdrake.pm:4306
-#, fuzzy, c-format
-msgid "Removing %s..."
-msgstr "Distingivo: %s\n"
-
-#: printer/printerdrake.pm:4310
-#, fuzzy, c-format
-msgid "Could not remove the %s printing system!"
-msgstr "Konfiguru retumon"
-
-#: printer/printerdrake.pm:4330
-#, fuzzy, c-format
-msgid "Installing %s..."
-msgstr "Instalanta pakaĵo %s"
-
-#: printer/printerdrake.pm:4334
-#, fuzzy, c-format
-msgid "Could not install the %s printing system!"
-msgstr "Konfiguru retumon"
-
-#: printer/printerdrake.pm:4402
-#, c-format
-msgid ""
-"In this mode there is no local printing system, all printing requests go "
-"directly to the server specified below. Note that it is not possible to "
-"define local print queues then and if the specified server is down it cannot "
-"be printed at all from this machine."
-msgstr ""
-
-#: printer/printerdrake.pm:4404
-#, c-format
-msgid ""
-"Enter the host name or IP of your CUPS server and click OK if you want to "
-"use this mode, click \"Quit\" otherwise."
-msgstr ""
-
-#: printer/printerdrake.pm:4418
-#, fuzzy, c-format
-msgid "Name or IP of remote server:"
-msgstr "Malproksimaj lpd servilo"
-
-#: printer/printerdrake.pm:4438
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Loka printilo"
-
-#: printer/printerdrake.pm:4458
-#, fuzzy, c-format
-msgid "Local CUPS printing system or remote CUPS server?"
-msgstr "Malproksima CUPS-a servilo"
-
-#: printer/printerdrake.pm:4459
-#, c-format
-msgid "The CUPS printing system can be used in two ways: "
-msgstr ""
-
-#: printer/printerdrake.pm:4461
-#, c-format
-msgid "1. The CUPS printing system can run locally. "
-msgstr ""
-
-#: printer/printerdrake.pm:4462
-#, c-format
-msgid ""
-"Then locally connected printers can be used and remote printers on other "
-"CUPS servers in the same network are automatically discovered. "
-msgstr ""
-
-#: printer/printerdrake.pm:4463
-#, c-format
-msgid ""
-"Disadvantage of this approach is, that more resources on the local machine "
-"are needed: Additional software packages need to be installed, the CUPS "
-"daemon has to run in the background and needs some memory, and the IPP port "
-"(port 631) is opened. "
-msgstr ""
-
-#: printer/printerdrake.pm:4465
-#, c-format
-msgid "2. All printing requests are immediately sent to a remote CUPS server. "
-msgstr ""
-
-#: printer/printerdrake.pm:4466
-#, c-format
-msgid ""
-"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
-"started or port opened, no software infrastructure for setting up local "
-"print queues is installed, so less memory and disk space is used. "
-msgstr ""
-
-#: printer/printerdrake.pm:4467
-#, c-format
-msgid ""
-"Disadvantage is that it is not possible to define local printers then and if "
-"the specified server is down it cannot be printed at all from this machine. "
-msgstr ""
-
-#: printer/printerdrake.pm:4469
-#, c-format
-msgid "How should CUPS be set up on your machine?"
-msgstr ""
-
-#: printer/printerdrake.pm:4473 printer/printerdrake.pm:4488
-#: printer/printerdrake.pm:4492 printer/printerdrake.pm:4498
-#, c-format
-msgid "Remote server, specify Name or IP here:"
-msgstr ""
-
-#: printer/printerdrake.pm:4487
-#, fuzzy, c-format
-msgid "Local CUPS printing system"
-msgstr "Konfiguru retumon"
-
-#: printer/printerdrake.pm:4526
-#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Elektu Printilan Konekton"
-
-#: printer/printerdrake.pm:4527
-#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Kiun printsistemo vi deziras uzi?"
-
-#: printer/printerdrake.pm:4576
-#, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Malsukcesis konfiguri la printilon \"%s\"!"
-
-#: printer/printerdrake.pm:4591
-#, c-format
-msgid "Installing Foomatic..."
-msgstr "Instalanta Foomatic..."
-
-#: printer/printerdrake.pm:4597
-#, c-format
-msgid "Could not install %s packages, %s cannot be started!"
-msgstr ""
-
-#: printer/printerdrake.pm:4789
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it. "
-msgstr ""
-"Jen la sekvantaj printvicoj.\n"
-"Vi povas aldoni pli aŭ ŝanĝi la ekzistantajn."
-
-#: printer/printerdrake.pm:4819
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
-
-#: printer/printerdrake.pm:4820
-#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
-
-#: printer/printerdrake.pm:4831
-#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: printer/printerdrake.pm:4843
-#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Konfiguru retumon"
-
-#: printer/printerdrake.pm:4852
-#, c-format
-msgid "Normal Mode"
-msgstr "Normala Modalo"
-
-#: printer/printerdrake.pm:4853
-#, c-format
-msgid "Expert Mode"
-msgstr "Spertuloreĝimo"
-
-#: printer/printerdrake.pm:5122 printer/printerdrake.pm:5180
-#: printer/printerdrake.pm:5259 printer/printerdrake.pm:5268
-#, c-format
-msgid "Printer options"
-msgstr "Printilaj opcioj"
-
-#: printer/printerdrake.pm:5158
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "Interreta Konfigurado"
-
-#: printer/printerdrake.pm:5160
-#, c-format
-msgid ""
-"Printer %s%s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Presilo %s%s\n"
-"Kion vi deziras modifi pri tiu presilo?"
-
-#: printer/printerdrake.pm:5165
-#, fuzzy, c-format
-msgid "This printer is disabled"
-msgstr "Ĉi tiu subdisko ne estas regrandecigebla"
-
-#: printer/printerdrake.pm:5167
-#, c-format
-msgid "Do it!"
-msgstr ""
-
-#: printer/printerdrake.pm:5172 printer/printerdrake.pm:5227
-#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "Disdividado de Interreta Konekto"
-
-#: printer/printerdrake.pm:5173 printer/printerdrake.pm:5233
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "Printilan Konekton"
-
-#: printer/printerdrake.pm:5175 printer/printerdrake.pm:5252
-#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
-
-#: printer/printerdrake.pm:5176 printer/printerdrake.pm:5253
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
-
-#: printer/printerdrake.pm:5182 printer/printerdrake.pm:5263
-#, c-format
-msgid "Set this printer as the default"
-msgstr ""
-
-#: printer/printerdrake.pm:5187 printer/printerdrake.pm:5269
-#: printer/printerdrake.pm:5271
-#, fuzzy, c-format
-msgid "Enable Printer"
-msgstr "Datumbazoj"
-
-#: printer/printerdrake.pm:5190 printer/printerdrake.pm:5274
-#: printer/printerdrake.pm:5276
-#, fuzzy, c-format
-msgid "Disable Printer"
-msgstr "Datumbazoj"
-
-#: printer/printerdrake.pm:5191 printer/printerdrake.pm:5279
-#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "Printas provpaĝo(j)n..."
-
-#: printer/printerdrake.pm:5192 printer/printerdrake.pm:5281
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Ĉu vi deziras provi la konfiguraĵon?"
-
-#: printer/printerdrake.pm:5193 printer/printerdrake.pm:5283
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Malproksima printilo"
-
-#: printer/printerdrake.pm:5241
-#, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Foriganta la malnovan presilon \"%s\"..."
-
-#: printer/printerdrake.pm:5272
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now enabled."
-msgstr "Presilo \"%s\" en servilo \"%s\""
-
-#: printer/printerdrake.pm:5277
-#, fuzzy, c-format
-msgid "Printer \"%s\" is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: printer/printerdrake.pm:5314
-#, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Ĉu vi vere deziras forigi la presilon \"%s\"?"
-
-#: printer/printerdrake.pm:5318
-#, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Foriganta presilon \"%s\"..."
-
-#: printer/printerdrake.pm:5342
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Loka printilo"
-
-#: printer/printerdrake.pm:5343
-#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: raid.pm:42
-#, fuzzy, c-format
-msgid "Can not add a partition to _formatted_ RAID %s"
-msgstr "Ne povas aldoni subdiskon al _formatita_ RAID md%d"
-
-#: raid.pm:145
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ne estas sufiĉaj subdiskoj por RAID nivelo %d\n"
-
-#: scanner.pm:96
-#, c-format
-msgid "Could not create directory /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:107
-#, c-format
-msgid "Could not create link /usr/share/sane/%s!"
-msgstr ""
-
-#: scanner.pm:114
-#, c-format
-msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
-msgstr ""
-
-#: scanner.pm:121
-#, c-format
-msgid "Could not set permissions of firmware file %s!"
-msgstr ""
-
-#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
-#: standalone/scannerdrake:78 standalone/scannerdrake:346
-#: standalone/scannerdrake:382 standalone/scannerdrake:446
-#: standalone/scannerdrake:490 standalone/scannerdrake:494
-#: standalone/scannerdrake:516 standalone/scannerdrake:581
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Elektu grafikan karton"
-
-#: scanner.pm:201 standalone/scannerdrake:947
-#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
-msgstr ""
-
-#: scanner.pm:202
-#, c-format
-msgid "Your scanner(s) will not be available for non-root users."
-msgstr ""
-
-#: security/help.pm:11
-#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-
-#: security/help.pm:13
-#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
-msgstr ""
-
-#: security/help.pm:15
-#, c-format
-msgid " Accept/Refuse icmp echo."
-msgstr ""
-
-#: security/help.pm:17
-#, c-format
-msgid "Allow/Forbid autologin."
-msgstr ""
-
-#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
-#: security/help.pm:21
-#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
-msgstr ""
-
-#: security/help.pm:27
-#, c-format
-msgid "Allow/Forbid reboot by the console user."
-msgstr ""
-
-#: security/help.pm:29
-#, fuzzy, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "Malproksima printilo"
-
-#: security/help.pm:31
-#, fuzzy, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "Malproksima printilo"
-
-#: security/help.pm:33
-#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-
-#: security/help.pm:35
-#, c-format
-msgid ""
-"Allow/forbid to export display when\n"
-"passing from the root account to the other users.\n"
-"\n"
-"See pam_xauth(8) for more details.'"
-msgstr ""
-
-#: security/help.pm:40
-#, c-format
-msgid ""
-"Allow/Forbid X connections:\n"
-"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
-"\n"
-"- NONE (no connection)."
-msgstr ""
-
-#: security/help.pm:48
-#, c-format
-msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
-msgstr ""
-
-#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
-#: security/help.pm:53
-#, c-format
-msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
-msgstr ""
-
-#: security/help.pm:63
-#, c-format
-msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
-msgstr ""
-
-#: security/help.pm:72
-#, c-format
-msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
-msgstr ""
-
-#: security/help.pm:77
-#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: security/help.pm:79
-#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\"%s\" is true, also reports to syslog."
-msgstr ""
-
-#: security/help.pm:80 standalone/draksec:213
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Elektas sekurnivelon"
-
-#: security/help.pm:82
-#, c-format
-msgid "Enable/Disable IP spoofing protection."
-msgstr ""
-
-#: security/help.pm:84
-#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-
-#: security/help.pm:86
-#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-
-#: security/help.pm:88
-#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr ""
-
-#: security/help.pm:90
-#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-
-#: security/help.pm:92
-#, c-format
-msgid "Use password to authenticate users."
-msgstr ""
-
-#: security/help.pm:94
-#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-
-#: security/help.pm:96
-#, c-format
-msgid " Activate/Disable daily security check."
-msgstr ""
-
-#: security/help.pm:98
-#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
-msgstr ""
-
-#: security/help.pm:100
-#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-
-#: security/help.pm:102
-#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
-msgstr ""
-
-#: security/help.pm:104
-#, c-format
-msgid "Set the password history length to prevent password reuse."
-msgstr ""
-
-#: security/help.pm:106
-#, c-format
-msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-
-#: security/help.pm:108
-#, fuzzy, c-format
-msgid "Set the root umask."
-msgstr "Root-pasvorto"
-
-#: security/help.pm:109
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
-
-#: security/help.pm:110
-#, c-format
-msgid ""
-"if set to yes, check for:\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
-msgstr ""
-
-#: security/help.pm:117
-#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
-
-#: security/help.pm:118
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-
-#: security/help.pm:119
-#, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
-
-#: security/help.pm:120
-#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
-
-#: security/help.pm:121
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
-
-#: security/help.pm:122
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
-
-#: security/help.pm:123
-#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
-
-#: security/help.pm:124
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
-
-#: security/help.pm:125
-#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
-
-#: security/help.pm:126
-#, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
-
-#: security/help.pm:127
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-
-#: security/help.pm:128
-#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
-
-#: security/help.pm:129
-#, c-format
-msgid "Do not send mails if there's nothing to warn about"
-msgstr ""
-
-#: security/help.pm:130
-#, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
-
-#: security/help.pm:131
-#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
-
-#: security/help.pm:132
-#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
-
-#: security/help.pm:134
-#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
-
-#: security/help.pm:136
-#, c-format
-msgid "Timeout unit is second"
-msgstr ""
-
-#: security/help.pm:138
-#, fuzzy, c-format
-msgid "Set the user umask."
-msgstr "Salutnomo"
-
-#: security/l10n.pm:11
-#, c-format
-msgid "Accept bogus IPv4 error messages"
-msgstr ""
-
-#: security/l10n.pm:12
-#, c-format
-msgid "Accept broadcasted icmp echo"
-msgstr ""
-
-#: security/l10n.pm:13
-#, c-format
-msgid "Accept icmp echo"
-msgstr ""
-
-#: security/l10n.pm:15
-#, c-format
-msgid "/etc/issue* exist"
-msgstr ""
-
-#: security/l10n.pm:16
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
-
-#: security/l10n.pm:17
-#, fuzzy, c-format
-msgid "Allow remote root login"
-msgstr "Malproksima printilo"
-
-#: security/l10n.pm:18
-#, c-format
-msgid "Direct root login"
-msgstr ""
-
-#: security/l10n.pm:19
-#, c-format
-msgid "List users on display managers (kdm and gdm)"
-msgstr ""
-
-#: security/l10n.pm:20
-#, c-format
-msgid "Export display when passing from root to the other users"
-msgstr ""
-
-#: security/l10n.pm:21
-#, fuzzy, c-format
-msgid "Allow X Window connections"
-msgstr "Winmodem-konekto"
-
-#: security/l10n.pm:22
-#, c-format
-msgid "Authorize TCP connections to X Window"
-msgstr ""
-
-#: security/l10n.pm:23
-#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
-msgstr ""
-
-#: security/l10n.pm:24
-#, fuzzy, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "Konfiguru servojn"
-
-#: security/l10n.pm:25
-#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
-msgstr ""
-
-#: security/l10n.pm:26
-#, c-format
-msgid "Syslog reports to console 12"
-msgstr ""
-
-#: security/l10n.pm:27
-#, c-format
-msgid "Name resolution spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:28
-#, c-format
-msgid "Enable IP spoofing protection"
-msgstr ""
-
-#: security/l10n.pm:29
-#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
-msgstr ""
-
-#: security/l10n.pm:30
-#, c-format
-msgid "Enable the logging of IPv4 strange packets"
-msgstr ""
-
-#: security/l10n.pm:31
-#, c-format
-msgid "Enable msec hourly security check"
-msgstr ""
-
-#: security/l10n.pm:32
-#, c-format
-msgid "Enable su only from the wheel group members or for any user"
-msgstr ""
-
-#: security/l10n.pm:33
-#, c-format
-msgid "Use password to authenticate users"
-msgstr ""
-
-#: security/l10n.pm:34
-#, c-format
-msgid "Ethernet cards promiscuity check"
-msgstr ""
-
-#: security/l10n.pm:35
-#, c-format
-msgid "Daily security check"
-msgstr ""
-
-#: security/l10n.pm:36
-#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr ""
-
-#: security/l10n.pm:37
-#, fuzzy, c-format
-msgid "No password aging for"
-msgstr "Neniu pasvorto"
-
-#: security/l10n.pm:38
-#, c-format
-msgid "Set password expiration and account inactivation delays"
-msgstr ""
-
-#: security/l10n.pm:39
-#, fuzzy, c-format
-msgid "Password history length"
-msgstr "Ĉi tiu pasvorto estas tro simpla"
-
-#: security/l10n.pm:40
-#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
-msgstr ""
-
-#: security/l10n.pm:41
-#, fuzzy, c-format
-msgid "Root umask"
-msgstr "Root-pasvorto"
-
-#: security/l10n.pm:42
-#, c-format
-msgid "Shell history size"
-msgstr ""
-
-#: security/l10n.pm:43
-#, c-format
-msgid "Shell timeout"
-msgstr ""
-
-#: security/l10n.pm:44
-#, fuzzy, c-format
-msgid "User umask"
-msgstr "Salutnomo"
-
-#: security/l10n.pm:45
-#, fuzzy, c-format
-msgid "Check open ports"
-msgstr "detektita en pordo %s"
-
-#: security/l10n.pm:46
-#, c-format
-msgid "Check for unsecured accounts"
-msgstr ""
-
-#: security/l10n.pm:47
-#, c-format
-msgid "Check permissions of files in the users' home"
-msgstr ""
-
-#: security/l10n.pm:48
-#, c-format
-msgid "Check if the network devices are in promiscuous mode"
-msgstr ""
-
-#: security/l10n.pm:49
-#, c-format
-msgid "Run the daily security checks"
-msgstr ""
-
-#: security/l10n.pm:50
-#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr ""
-
-#: security/l10n.pm:51
-#, c-format
-msgid "Check empty password in /etc/shadow"
-msgstr ""
-
-#: security/l10n.pm:52
-#, c-format
-msgid "Verify checksum of the suid/sgid files"
-msgstr ""
-
-#: security/l10n.pm:53
-#, c-format
-msgid "Check additions/removals of suid root files"
-msgstr ""
-
-#: security/l10n.pm:54
-#, c-format
-msgid "Report unowned files"
-msgstr ""
-
-#: security/l10n.pm:55
-#, c-format
-msgid "Check files/directories writable by everybody"
-msgstr ""
-
-#: security/l10n.pm:56
-#, c-format
-msgid "Run chkrootkit checks"
-msgstr ""
-
-#: security/l10n.pm:57
-#, c-format
-msgid "Do not send mails when unneeded"
-msgstr ""
-
-#: security/l10n.pm:58
-#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
-
-#: security/l10n.pm:59
-#, c-format
-msgid "Report check result by mail"
-msgstr ""
-
-#: security/l10n.pm:60
-#, c-format
-msgid "Run some checks against the rpm database"
-msgstr ""
-
-#: security/l10n.pm:61
-#, c-format
-msgid "Report check result to syslog"
-msgstr ""
-
-#: security/l10n.pm:62
-#, c-format
-msgid "Reports check result to tty"
-msgstr ""
-
-#: security/level.pm:10
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Bonvenon Al Rompistoj"
-
-#: security/level.pm:11
-#, c-format
-msgid "Poor"
-msgstr "Malbona"
-
-#: security/level.pm:13
-#, c-format
-msgid "High"
-msgstr "Alta"
-
-#: security/level.pm:14
-#, fuzzy, c-format
-msgid "Higher"
-msgstr "Alta"
-
-#: security/level.pm:15
-#, c-format
-msgid "Paranoid"
-msgstr "Paranoja"
-
-#: security/level.pm:41
-#, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"vi devus uzi ĉi tiun nivelon zorge. Ĝi faras vian komputilon pli facila\n"
-"por uzi, sed delikatega: vi devus neniam uzi ĝi surrete.\n"
-"Ĝi ne havas pasvortojn."
-
-#: security/level.pm:44
-#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr ""
-"Pasvortoj nun estas ebligataj, sed uzado kiel reta komputilo estas ankoraŭ\n"
-"ne rekomendita."
-
-#: security/level.pm:45
-#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"Ĉi tiu estas la normala sekureco rekomendata por komputilo kiu estos uzata\n"
-"por konekti al la Interreto kiel kliento.  Nun estas sekurecaj kontroloj."
-
-#: security/level.pm:46
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: security/level.pm:47
-#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Kun ĉi tiu sekurnivelo, uzado de ĉi tiu komputilo kiel servilo ebliĝas.\n"
-"La sekureco nun estas sufiĉe alta por uzi la sistemon kiel servilo kiu\n"
-"akceptas konektojn de multaj klientoj."
-
-#: security/level.pm:50
-#, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Ni uzas aspektojn de la kvara nivelo, sed nun la komputilo estas tute\n"
-"malfermita.  Sekurecaj aspektoj estas ĉe iliaj maksimumoj."
-
-#: security/level.pm:55
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opcioj"
-
-#: security/level.pm:56
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Elektu sekurnivelon?"
-
-#: security/level.pm:60
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "Elektas sekurnivelon"
-
-#: security/level.pm:62
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Elektu opciojn por servilo"
-
-#: security/level.pm:63
-#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: security/level.pm:64
-#, c-format
-msgid "Security Administrator (login or email)"
-msgstr ""
-
-#: services.pm:19
-#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
-"Lanĉu la ALSA (Advanced Linux Sound Architecture - Avancita Linuksa Son-"
-"Arkitekturo)-sonsistemon"
-
-#: services.pm:20
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, perioda ordonvicigilo."
-
-#: services.pm:21
-#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd estas uzata por monitori la bateriostaton kaj registri ĝin en la\n"
-"sistemlogdosiero (syslog).  Vi ankaŭ povas uzi ĝin por halti la komputilon\n"
-"kiam la baterioŝargo estas malgranda."
-
-#: services.pm:23
-#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"Lanĉas ordonojn vicigitajn per la 'at' ordono je la horo specifita kiam\n"
-"'at' estis uzata, kaj lanĉas baĉajn ordonojn kiam la ŝargmezo estas\n"
-"sufiĉe malgranda."
-
-#: services.pm:25
-#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron estas norma Uniksa programo kiu lanĉas programojn kiujn la uzulo\n"
-"specifas je periodaj tempoj.  vixie cron aldonas kelkajn trajtojn al la\n"
-"baza Uniksa cron, inkluzive de pli bona sekureco kaj pli fortaj\n"
-"konfiguraj opcioj."
-
-#: services.pm:28
-#, c-format
-msgid ""
-"FAM is a file monitoring daemon. It is used to get reports when files "
-"change.\n"
-"It is used by GNOME and KDE"
-msgstr ""
-
-#: services.pm:30
-#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM aldonas subtenon por musoj al teksta-reĝimaj Linuksaj aplikoj ekzemple\n"
-"la 'Midnight Commander' (Meznokta Estro).  Ankaŭ ĝi permesas uzi la muson\n"
-"por transpoŝigi ĉe la konzolo (Sen X Fenestroj)."
-
-#: services.pm:33
-#, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake rulas aparato-provon, kaj laŭopcie konfiguras\n"
-"novan/ŝanĝitan aparataron."
-
-#: services.pm:35
-#, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache estas Tut-Tera Teksaĵa servilo.  Ĝi liveras HTML-ajn dosierojn\n"
-"kaj CGI (komunakluza interfaco)."
-
-#: services.pm:36
-#, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"La interreta superservila demono (kutime nomata inetd) lanĉas sortimenton\n"
-"da aliaj interretaj servoj laŭbezone.  Ĝi respondas por la lanĉo de multaj\n"
-"servoj, inkluzive de telnet, ftp, rsh, kaj rlogin.  Se vi malŝaltas inetd,\n"
-"ve malŝaltas ĉiujn el la servoj por kiuj ĝi respondas."
-
-#: services.pm:40
-#, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Lanĉu pakaĵfiltradon por Linuksa kerno 2.2-serioj, por konfiguri\n"
-"brulmuron por protekti vian maŝinon kotraŭ elretaj atakoj."
-
-#: services.pm:42
-#, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Ĉi tiu pakaĵo ŝargas la elektitan klavarmapon laŭ /etc/sysconfig/keyboard.\n"
-"Vi povas elekti ĉi tion per la kbdconfig utilprogramo.  Vi lasus ĉi tion\n"
-"ebligatan por la plejmulto da sistemoj."
-
-#: services.pm:45
-#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Auxtomata regenerado de kernokapoj en /boot por\n"
-"/usr/include/linux/{autoconf, version}.h"
-
-#: services.pm:47
-#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Auxtomata detektado kaj konfigurado de aparataro dum starto."
-
-#: services.pm:48
-#, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf aranĝos kelkfoje por fari diversajn taskojn\n"
-"dum starto por daŭrigi la sistem-konfiguraĵon."
-
-#: services.pm:50
-#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd estas la printvica dajmono bezonata por lpr taŭge funkcii.  Ĝi estas\n"
-"baze servilo kiu arbitracias printajn taskojn al printilo(j)."
-
-#: services.pm:52
-#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linuksa Virtuala servilo, uzata por starigi kapablegan kaj\n"
-"bonege atingeblan servilon."
-
-#: services.pm:54
-#, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) estas Domajna NomServilo (DNS) kiun vi uzas por trovi\n"
-"poŝtejojn de IP adresoj."
-
-#: services.pm:55
-#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Muntas kaj malmuntas ĉiujn RetDosierSistemajn (NFS), SMB (Lan\n"
-"Manager/Vindozaj), kaj NCP (NetWare) surmetingojn."
-
-#: services.pm:57
-#, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Ŝaltas/Malŝaltas ĉiujn retajn interfacojn konfiguratajn por lanĉi\n"
-"dum sistemstartado."
-
-#: services.pm:59
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Ĉi tiu servo provizas NFS dosierŝlosado, kiun vi konfiguras per la\n"
-"/etc/exports dosiero."
-
-#: services.pm:62
-#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS estas populara protokolo por dosierdistribuado tra TCP/IP retoj.\n"
-"Ĉi tiu servo provizas NFS dosierŝlosado."
-
-#: services.pm:64
-#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and Xorg at boot."
-msgstr ""
-
-#: services.pm:66
-#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Subteno de OKI 4w kaj kongruaj winpresiloj."
-
-#: services.pm:67
-#, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It will not get started unless configured so it is safe "
-"to have\n"
-"it installed on machines that do not need it."
-msgstr ""
-"PCMCIA subteno kutime estas subteno de aĵo kiel ethernet kaj modemoj en\n"
-"tekkomputiloj.  Ĝi ne estos lanĉata krom se vi konfiguras ĝi por ke ĝi\n"
-"estu sendanĝera ĉe komputiloj kiuj ne bezonas ĝin."
-
-#: services.pm:70
-#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"La pordmapilo direktas RPC konektojn, kiujn protokoloj kiel NFS kaj NIS "
-"uzas.\n"
-"La pordmapservilo devas esti uzata ĉe komputiloj kiuj agas kiel serviloj\n"
-"por protokoloj kiuj uzas la RPC mekanismon."
-
-#: services.pm:73
-#, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix estas PoŝtTransportPerilo, kiu estas la programo kiu movas\n"
-"retpoŝton de unu komputilo al alia."
-
-#: services.pm:74
-#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Savas kaj restaŭras sisteman entropikomunaĵon por pli altkvalita\n"
-"generado de aleatoraj nombroj."
-
-#: services.pm:76
-#, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-
-#: services.pm:78
-#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"La routed dajmono permesas aŭtomatan ĝisdatigon de la IP enkursigila tabelo\n"
-"per la RIP protokolo.  Kvankam RIP estas vaste uzata je malgrandaj retoj,\n"
-"pli malsimplaj enkursigaj protokoloj estas bezonataj por malsimplaj retoj."
-
-#: services.pm:81
-#, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"La rstat protokolo permesas al uzuloj sur reto ekstrakti metrikojn\n"
-"pri la rapideco de iu ajn komputilo sur tiu reto."
-
-#: services.pm:83
-#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"La ruser protokolo permesas al uzuloj sur reto identigi kiujn estas\n"
-"konektataj ĉe aliaj respondantaj komputiloj."
-
-#: services.pm:85
-#, c-format
-msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similar to finger)."
-msgstr ""
-"La rwho protokolo permesas al uzuloj havigi liston de ĉiuj el la uzuloj\n"
-"konektataj ĉe komputilo kiu estas uzanta la rwho dajmono (simila al finger)."
-
-#: services.pm:87
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Lanĉu la sonsistemon en via maŝino"
-
-#: services.pm:88
-#, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog (sistemlogilo) estas la rimedo per kiu multaj dajmonoj registras\n"
-"mesaĝojn al diversaj sistemlogdosieroj.  Ĝi estas bona ideo ĉiam uzi\n"
-"syslog."
-
-#: services.pm:90
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Ŝargu la pelilojn por via usb-aparatoj."
-
-#: services.pm:91
-#, c-format
-msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
-msgstr "Startigas la X tiparan servilon (tio estas ... ."
-
-#: services.pm:115 services.pm:157
-#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Elektu kiuj servoj estu aŭtomate startigotaj dum starto"
-
-#: services.pm:127
-#, c-format
-msgid "Printing"
-msgstr "Presante"
-
-#: services.pm:128
-#, c-format
-msgid "Internet"
-msgstr "Interreto"
-
-#: services.pm:131
-#, c-format
-msgid "File sharing"
-msgstr "Dosier-kundivido"
-
-#: services.pm:138
-#, c-format
-msgid "Remote Administration"
-msgstr "Malproksima administrado"
-
-#: services.pm:146
-#, c-format
-msgid "Database Server"
-msgstr "Datumbaz-servilo"
-
-#: services.pm:209
-#, c-format
-msgid "running"
-msgstr "ruliĝante"
-
-#: services.pm:209
-#, c-format
-msgid "stopped"
-msgstr "haltigita"
-
-#: services.pm:213
-#, c-format
-msgid "Services and daemons"
-msgstr "Servoj kaj demonoj"
-
-#: services.pm:219
-#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
-msgstr ""
-"Ne pli da informo\n"
-"pri tiu servo, bedaŭrinde."
-
-#: services.pm:224 ugtk2.pm:1018
-#, c-format
-msgid "Info"
-msgstr "Informo"
-
-#: services.pm:227
-#, c-format
-msgid "Start when requested"
-msgstr ""
-
-#: services.pm:227
-#, c-format
-msgid "On boot"
-msgstr "Startante"
-
-#: services.pm:244 standalone/drakroam:185
-#, c-format
-msgid "Start"
-msgstr "Startu"
-
-#: services.pm:244 standalone/drakroam:186
-#, c-format
-msgid "Stop"
-msgstr "Haltu"
-
-#: share/advertising/01.pl:13
-#, c-format
-msgid "<b>What is Mandriva Linux?</b>"
-msgstr ""
-
-#: share/advertising/01.pl:15
-#, c-format
-msgid "Welcome to <b>Mandriva Linux</b>!"
-msgstr "Bonvenon ĉe <b>Mandriva Linux</b>!"
-
-#: share/advertising/01.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is a <b>Linux distribution</b> that comprises the core of the "
-"system, called the <b>operating system</b> (based on the Linux kernel) "
-"together with <b>a lot of applications</b> meeting every need you could even "
-"think of."
-msgstr ""
-
-#: share/advertising/01.pl:19
-#, c-format
-msgid ""
-"Mandriva Linux is the most <b>user-friendly</b> Linux distribution today. It "
-"is also one of the <b>most widely used</b> Linux distributions worldwide!"
-msgstr ""
-
-#: share/advertising/02.pl:13
-#, fuzzy, c-format
-msgid "<b>Open Source</b>"
-msgstr "<b>Serviloj</b>"
-
-#: share/advertising/02.pl:15
-#, fuzzy, c-format
-msgid "Welcome to the <b>world of open source</b>!"
-msgstr "Provu konfiguraĵon"
-
-#: share/advertising/02.pl:17
-#, c-format
-msgid ""
-"Mandriva Linux is committed to the open source model. This means that this "
-"new release is the result of <b>collaboration</b> between <b>Mandriva's team "
-"of developers</b> and the <b>worldwide community</b> of Mandriva Linux "
-"contributors."
-msgstr ""
-
-#: share/advertising/02.pl:19
-#, c-format
-msgid ""
-"We would like to <b>thank</b> everyone who participated in the development "
-"of this latest release."
-msgstr ""
-
-#: share/advertising/03.pl:13
-#, c-format
-msgid "<b>The GPL</b>"
-msgstr ""
-
-#: share/advertising/03.pl:15
-#, c-format
-msgid ""
-"Most of the software included in the distribution and all of the Mandriva "
-"Linux tools are licensed under the <b>General Public License</b>."
-msgstr ""
-
-#: share/advertising/03.pl:17
-#, c-format
-msgid ""
-"The GPL is at the heart of the open source model; it grants everyone the "
-"<b>freedom</b> to use, study, distribute and improve the software any way "
-"they want, provided they make the results available."
-msgstr ""
-
-#: share/advertising/03.pl:19
-#, c-format
-msgid ""
-"The main benefit of this is that the number of developers is virtually "
-"<b>unlimited</b>, resulting in <b>very high quality</b> software."
-msgstr ""
-
-#: share/advertising/04.pl:13
-#, c-format
-msgid "<b>Join the Community</b>"
-msgstr ""
-
-#: share/advertising/04.pl:15
-#, c-format
-msgid ""
-"Mandriva Linux has one of the <b>biggest communities</b> of users and "
-"developers. The role of such a community is very wide, ranging from bug "
-"reporting to the development of new applications. The community plays a "
-"<b>key role</b> in the Mandriva Linux world."
-msgstr ""
-
-#: share/advertising/04.pl:17
-#, c-format
-msgid ""
-"To <b>learn more</b> about our dynamic community, please visit <b>www."
-"mandrivalinux.com</b> or directly <b>www.mandrivalinux.com/en/cookerdevel."
-"php3</b> if you would like to get <b>involved</b> in the development."
-msgstr ""
-
-#: share/advertising/05.pl:15
-#, c-format
-msgid "<b>Download Version</b>"
-msgstr ""
-
-#: share/advertising/05.pl:17
-#, c-format
-msgid ""
-"You are now installing <b>Mandriva Linux Download</b>. This is the free "
-"version that Mandriva wants to keep <b>available to everyone</b>."
-msgstr ""
-
-#: share/advertising/05.pl:19
-#, c-format
-msgid ""
-"The Download version <b>cannot include</b> all the software that is not open "
-"source. Therefore, you will not find in the Download version:"
-msgstr ""
-
-#: share/advertising/05.pl:20
-#, c-format
-msgid ""
-"\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:21
-#, c-format
-msgid ""
-"\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, "
-"Flash™, etc.)."
-msgstr ""
-
-#: share/advertising/05.pl:23
-#, c-format
-msgid ""
-"You will not have access to the <b>services included</b> in the other "
-"Mandriva products either."
-msgstr ""
-
-#: share/advertising/06.pl:13
-#, c-format
-msgid "<b>Discovery, Your First Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/06.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux Discovery</b>."
-msgstr ""
-
-#: share/advertising/06.pl:17
-#, c-format
-msgid ""
-"Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux "
-"distribution. It includes a hand-picked selection of <b>premium software</b> "
-"for office, multimedia and Internet activities. Its menu is task-oriented, "
-"with a single application per task."
-msgstr ""
-
-#: share/advertising/07.pl:13
-#, c-format
-msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
-msgstr ""
-
-#: share/advertising/07.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack</b>."
-msgstr ""
-
-#: share/advertising/07.pl:17
-#, c-format
-msgid ""
-"PowerPack is Mandriva's <b>premier Linux desktop</b> product. PowerPack "
-"includes <b>thousands of applications</b> - everything from the most popular "
-"to the most advanced."
-msgstr ""
-
-#: share/advertising/08.pl:13
-#, c-format
-msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
-msgstr ""
-
-#: share/advertising/08.pl:15
-#, c-format
-msgid "You are now installing <b>Mandriva Linux PowerPack+</b>."
-msgstr ""
-
-#: share/advertising/08.pl:17
-#, c-format
-msgid ""
-"PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-"
-"sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop "
-"applications</b> and a comprehensive selection of world-class <b>server "
-"applications</b>."
-msgstr ""
-
-#: share/advertising/09.pl:13
-#, fuzzy, c-format
-msgid "<b>Mandriva Products</b>"
-msgstr "Konekti al la interreto"
-
-#: share/advertising/09.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva</b> has developed a wide range of <b>Mandriva Linux</b> products."
-msgstr ""
-
-#: share/advertising/09.pl:17
-#, c-format
-msgid "The Mandriva Linux products are:"
-msgstr ""
-
-#: share/advertising/09.pl:18
-#, c-format
-msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:19
-#, c-format
-msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
-msgstr ""
-
-#: share/advertising/09.pl:20
-#, c-format
-msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
-msgstr ""
-
-#: share/advertising/09.pl:21
-#, c-format
-msgid ""
-"\t* <b>Mandriva Linux for x86-64</b>, The Mandriva Linux solution for making "
-"the most of your 64-bit processor."
-msgstr ""
-
-#: share/advertising/10.pl:15
-#, c-format
-msgid "<b>Mandriva Products (Nomad Products)</b>"
-msgstr ""
-
-#: share/advertising/10.pl:17
-#, c-format
-msgid ""
-"Mandriva has developed two products that allow you to use Mandriva Linux "
-"<b>on any computer</b> and without any need to actually install it:"
-msgstr ""
-
-#: share/advertising/10.pl:18
-#, c-format
-msgid ""
-"\t* <b>Move</b>, a Mandriva Linux distribution that runs entirely from a "
-"bootable CD-ROM."
-msgstr ""
-
-#: share/advertising/10.pl:19
-#, c-format
-msgid ""
-"\t* <b>GlobeTrotter</b>, a Mandriva Linux distribution pre-installed on the "
-"ultra-compact “LaCie Mobile Hard Drive”."
-msgstr ""
-
-#: share/advertising/11.pl:13
-#, c-format
-msgid "<b>Mandriva Products (Professional Solutions)</b>"
-msgstr ""
-
-#: share/advertising/11.pl:15
-#, c-format
-msgid ""
-"Below are the Mandriva products designed to meet the <b>professional needs</"
-"b>:"
-msgstr ""
-
-#: share/advertising/11.pl:16
-#, c-format
-msgid ""
-"\t* <b>Corporate Desktop</b>, The Mandriva Linux Desktop for Businesses."
-msgstr ""
-
-#: share/advertising/11.pl:17
-#, c-format
-msgid "\t* <b>Corporate Server</b>, The Mandriva Linux Server Solution."
-msgstr ""
-
-#: share/advertising/11.pl:18
-#, c-format
-msgid ""
-"\t* <b>Multi-Network Firewall</b>, The Mandriva Linux Security Solution."
-msgstr ""
-
-#: share/advertising/12.pl:13
-#, c-format
-msgid "<b>The KDE Choice</b>"
-msgstr ""
-
-#: share/advertising/12.pl:15
-#, c-format
-msgid ""
-"With your Discovery, you will be introduced to <b>KDE</b>, the most advanced "
-"and user-friendly <b>graphical desktop environment</b> available."
-msgstr ""
-
-#: share/advertising/12.pl:17
-#, c-format
-msgid ""
-"KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you "
-"will not ever think of running another operating system!"
-msgstr ""
-
-#: share/advertising/12.pl:19
-#, c-format
-msgid ""
-"KDE also includes a lot of <b>well integrated applications</b> such as "
-"Konqueror, the web browser and Kontact, the personal information manager."
-msgstr ""
-
-#: share/advertising/13-a.pl:13 share/advertising/13-b.pl:13
-#, fuzzy, c-format
-msgid "<b>Choose your Favorite Desktop Environment</b>"
-msgstr "<b>Programaj medioj</b>"
-
-#: share/advertising/13-a.pl:15
-#, c-format
-msgid ""
-"With PowerPack, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/13-a.pl:17 share/advertising/13-b.pl:17
-#, c-format
-msgid ""
-"KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical "
-"desktop environment available. It includes a lot of integrated applications."
-msgstr ""
-
-#: share/advertising/13-a.pl:19 share/advertising/13-b.pl:19
-#, c-format
-msgid ""
-"But we advise you to try all available ones (including <b>GNOME</b>, "
-"<b>IceWM</b>, etc.) and pick your favorite."
-msgstr ""
-
-#: share/advertising/13-b.pl:15
-#, c-format
-msgid ""
-"With PowerPack+, you will have the choice of the <b>graphical desktop "
-"environment</b>. Mandriva has chosen <b>KDE</b> as the default one."
-msgstr ""
-
-#: share/advertising/14.pl:15
-#, c-format
-msgid "<b>OpenOffice.org</b>"
-msgstr ""
-
-#: share/advertising/14.pl:17
-#, c-format
-msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/14.pl:19
-#, c-format
-msgid ""
-"It is a <b>full-featured office suite</b> that includes word processor, "
-"spreadsheet, presentation and drawing applications."
-msgstr ""
-
-#: share/advertising/14.pl:21
-#, c-format
-msgid ""
-"OpenOffice.org can read and write most types of <b>Microsoft® Office</b> "
-"documents such as Word, Excel and PowerPoint® files."
-msgstr ""
-
-#: share/advertising/15.pl:13
-#, fuzzy, c-format
-msgid "<b>Kontact</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/15.pl:15
-#, c-format
-msgid ""
-"Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
-msgstr ""
-
-#: share/advertising/15.pl:17
-#, c-format
-msgid ""
-"More than just a full-featured <b>e-mail client</b>, Kontact also includes "
-"an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</"
-"b>!"
-msgstr ""
-
-#: share/advertising/15.pl:19
-#, c-format
-msgid ""
-"It is the easiest way to communicate with your contacts and to organize your "
-"time."
-msgstr ""
-
-#: share/advertising/16.pl:13
-#, c-format
-msgid "<b>Surf the Internet</b>"
-msgstr "<b>Foliumi la Interreton</b>"
-
-#: share/advertising/16.pl:15
-#, c-format
-msgid "Discovery will give you access to <b>every Internet resource</b>:"
-msgstr ""
-
-#: share/advertising/16.pl:16
-#, c-format
-msgid "\t* Browse the <b>Web</b> with Konqueror."
-msgstr ""
-
-#: share/advertising/16.pl:17
-#, c-format
-msgid "\t* <b>Chat</b> online with your friends using Kopete."
-msgstr ""
-
-#: share/advertising/16.pl:18
-#, fuzzy, c-format
-msgid "\t* <b>Transfer</b> files with KBear."
-msgstr "Movi dosierojn per FTP"
-
-#: share/advertising/16.pl:19 share/advertising/17.pl:19
-#: share/advertising/18.pl:22
-#, c-format
-msgid "\t* ..."
-msgstr ""
-
-#: share/advertising/17.pl:13
-#, c-format
-msgid "<b>Enjoy our Multimedia Features</b>"
-msgstr ""
-
-#: share/advertising/17.pl:15
-#, c-format
-msgid "Discovery will also make <b>multimedia</b> very easy for you:"
-msgstr ""
-
-#: share/advertising/17.pl:16
-#, c-format
-msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
-msgstr ""
-
-#: share/advertising/17.pl:17
-#, c-format
-msgid "\t* Listen to your <b>music files</b> with amaroK."
-msgstr ""
-
-#: share/advertising/17.pl:18
-#, c-format
-msgid "\t* Edit and create <b>images</b> with the GIMP."
-msgstr ""
-
-#: share/advertising/18.pl:13
-#, c-format
-msgid "<b>Enjoy the Wide Range of Applications</b>"
-msgstr ""
-
-#: share/advertising/18.pl:15
-#, c-format
-msgid ""
-"In the Mandriva Linux menu you will find <b>easy-to-use</b> applications for "
-"<b>all of your tasks</b>:"
-msgstr ""
-
-#: share/advertising/18.pl:16
-#, c-format
-msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
-msgstr ""
-
-#: share/advertising/18.pl:17
-#, c-format
-msgid ""
-"\t* Manage your personal data with the integrated personal information "
-"suites <b>Kontact</b> and <b>Evolution</b>."
-msgstr ""
-
-#: share/advertising/18.pl:18
-#, c-format
-msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
-msgstr ""
-
-#: share/advertising/18.pl:19
-#, c-format
-msgid "\t* Participate in online chat with <b>Kopete</b>."
-msgstr ""
-
-#: share/advertising/18.pl:20
-#, c-format
-msgid ""
-"\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your "
-"<b>videos</b>."
-msgstr ""
-
-#: share/advertising/18.pl:21
-#, c-format
-msgid "\t* Edit and create images with the <b>GIMP</b>."
-msgstr ""
-
-#: share/advertising/19.pl:13
-#, c-format
-msgid "<b>Development Environments</b>"
-msgstr "<b>Programaj medioj</b>"
-
-#: share/advertising/19.pl:15 share/advertising/22.pl:17
-#, c-format
-msgid ""
-"PowerPack gives you the best tools to <b>develop</b> your own applications."
-msgstr ""
-
-#: share/advertising/19.pl:17
-#, c-format
-msgid ""
-"You will enjoy the powerful, integrated development environment from KDE, "
-"<b>KDevelop</b>, which will let you program in a lot of languages."
-msgstr ""
-
-#: share/advertising/19.pl:19
-#, c-format
-msgid ""
-"PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</"
-"b>, the associated debugger."
-msgstr ""
-
-#: share/advertising/20.pl:13
-#, fuzzy, c-format
-msgid "<b>Development Editors</b>"
-msgstr "Programisto"
-
-#: share/advertising/20.pl:15
-#, c-format
-msgid "PowerPack will let you choose between those <b>popular editors</b>:"
-msgstr ""
-
-#: share/advertising/20.pl:16
-#, c-format
-msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
-msgstr ""
-
-#: share/advertising/20.pl:17
-#, c-format
-msgid ""
-"\t* <b>XEmacs</b>: another open source text editor and application "
-"development system."
-msgstr ""
-
-#: share/advertising/20.pl:18
-#, c-format
-msgid ""
-"\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
-msgstr ""
-
-#: share/advertising/21.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Languages</b>"
-msgstr "Programisto"
-
-#: share/advertising/21.pl:17
-#, c-format
-msgid ""
-"With all these <b>powerful tools</b>, you will be able to write applications "
-"in <b>dozens of programming languages</b>:"
-msgstr ""
-
-#: share/advertising/21.pl:18
-#, c-format
-msgid "\t* The famous <b>C language</b>."
-msgstr ""
-
-#: share/advertising/21.pl:19
-#, c-format
-msgid "\t* Object oriented languages:"
-msgstr ""
-
-#: share/advertising/21.pl:20
-#, c-format
-msgid "\t\t* <b>C++</b>"
-msgstr "\t\t* <b>C++</b>"
-
-#: share/advertising/21.pl:21
-#, c-format
-msgid "\t\t* <b>Java™</b>"
-msgstr "\t\t* <b>Java™</b>"
-
-#: share/advertising/21.pl:22
-#, fuzzy, c-format
-msgid "\t* Scripting languages:"
-msgstr "Presadministrilo"
-
-#: share/advertising/21.pl:23
-#, c-format
-msgid "\t\t* <b>Perl</b>"
-msgstr "\t\t* <b>Perl</b>"
-
-#: share/advertising/21.pl:24
-#, c-format
-msgid "\t\t* <b>Python</b>"
-msgstr "\t\t* <b>Python</b>"
-
-#: share/advertising/21.pl:25 share/advertising/28.pl:24
-#, c-format
-msgid "\t* And many more."
-msgstr ""
-
-#: share/advertising/22.pl:15
-#, fuzzy, c-format
-msgid "<b>Development Tools</b>"
-msgstr "Programisto"
-
-#: share/advertising/22.pl:19
-#, c-format
-msgid ""
-"With the powerful integrated development environment <b>KDevelop</b> and the "
-"leading Linux compiler <b>GCC</b>, you will be able to create applications "
-"in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
-msgstr ""
-
-#: share/advertising/23.pl:13
-#, fuzzy, c-format
-msgid "<b>Groupware Server</b>"
-msgstr "<b>Serviloj</b>"
-
-#: share/advertising/23.pl:15
-#, c-format
-msgid ""
-"PowerPack+ will give you access to <b>Kolab</b>, a full-featured "
-"<b>groupware server</b> which will, thanks to the client <b>Kontact</b>, "
-"allow you to:"
-msgstr ""
-
-#: share/advertising/23.pl:16
-#, c-format
-msgid "\t* Send and receive your <b>e-mails</b>."
-msgstr ""
-
-#: share/advertising/23.pl:17
-#, c-format
-msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
-msgstr ""
-
-#: share/advertising/23.pl:18
-#, c-format
-msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
-msgstr ""
-
-#: share/advertising/24.pl:15
-#, c-format
-msgid "<b>Servers</b>"
-msgstr "<b>Serviloj</b>"
-
-#: share/advertising/24.pl:17
-#, c-format
-msgid ""
-"Empower your business network with <b>premier server solutions</b> including:"
-msgstr ""
-
-#: share/advertising/24.pl:18
-#, c-format
-msgid ""
-"\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
-msgstr ""
-
-#: share/advertising/24.pl:19
-#, c-format
-msgid "\t* <b>Apache</b>: The most widely used web server."
-msgstr ""
-
-#: share/advertising/24.pl:20
-#, c-format
-msgid ""
-"\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source "
-"databases."
-msgstr ""
-
-#: share/advertising/24.pl:21
-#, c-format
-msgid ""
-"\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-"
-"transparent version control system."
-msgstr ""
-
-#: share/advertising/24.pl:22
-#, c-format
-msgid ""
-"\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
-msgstr ""
-
-#: share/advertising/24.pl:23
-#, c-format
-msgid ""
-"\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail "
-"servers."
-msgstr ""
-
-#: share/advertising/25.pl:13
-#, c-format
-msgid "<b>Mandriva Linux Control Center</b>"
-msgstr "<b>Mandriva Linux-Regejo</b>"
-
-#: share/advertising/25.pl:15
-#, c-format
-msgid ""
-"The <b>Mandriva Linux Control Center</b> is an essential collection of "
-"Mandriva Linux-specific utilities designed to simplify the configuration of "
-"your computer."
-msgstr ""
-
-#: share/advertising/25.pl:17
-#, c-format
-msgid ""
-"You will immediately appreciate this collection of <b>more than 60</b> handy "
-"utilities for <b>easily configuring your system</b>: hardware devices, mount "
-"points, network and Internet, security level of your computer, etc."
-msgstr ""
-
-#: share/advertising/26.pl:13
-#, c-format
-msgid "<b>The Open Source Model</b>"
-msgstr ""
-
-#: share/advertising/26.pl:15
-#, c-format
-msgid ""
-"Like all computer programming, open source software <b>requires time and "
-"people</b> for development. In order to respect the open source philosophy, "
-"Mandriva sells added value products and services to <b>keep improving "
-"Mandriva Linux</b>. If you want to <b>support the open source philosophy</b> "
-"and the development of Mandriva Linux, <b>please</b> consider buying one of "
-"our products or services!"
-msgstr ""
-
-#: share/advertising/27.pl:13
-#, fuzzy, c-format
-msgid "<b>Online Store</b>"
-msgstr "Konekti al la interreto"
-
-#: share/advertising/27.pl:15
-#, c-format
-msgid ""
-"To learn more about Mandriva products and services, you can visit our <b>e-"
-"commerce platform</b>."
-msgstr ""
-
-#: share/advertising/27.pl:17
-#, c-format
-msgid "There you can find all our products, services and third-party products."
-msgstr ""
-
-#: share/advertising/27.pl:19
-#, c-format
-msgid ""
-"This platform has just been <b>redesigned</b> to improve its efficiency and "
-"usability."
-msgstr ""
-
-#: share/advertising/27.pl:21
-#, c-format
-msgid "Stop by today at <b>store.mandriva.com</b>!"
-msgstr ""
-
-#: share/advertising/28.pl:15
-#, c-format
-msgid "<b>Mandriva Club</b>"
-msgstr "<b>Mandriva Club</b>"
-
-#: share/advertising/28.pl:17
-#, c-format
-msgid ""
-"<b>Mandriva Club</b> is the <b>perfect companion</b> to your Mandriva Linux "
-"product.."
-msgstr ""
-
-#: share/advertising/28.pl:19
-#, c-format
-msgid ""
-"Take advantage of <b>valuable benefits</b> by joining Mandriva Club, such as:"
-msgstr ""
-
-#: share/advertising/28.pl:20
-#, c-format
-msgid ""
-"\t* <b>Special discounts</b> on products and services of our online store "
-"<b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/advertising/28.pl:21
-#, c-format
-msgid ""
-"\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ "
-"drivers)."
-msgstr ""
-
-#: share/advertising/28.pl:22
-#, c-format
-msgid "\t* Participation in Mandriva Linux <b>user forums</b>."
-msgstr ""
-
-#: share/advertising/28.pl:23
-#, c-format
-msgid ""
-"\t* <b>Early and privileged access</b>, before public release, to Mandriva "
-"Linux <b>ISO images</b>."
-msgstr ""
-
-#: share/advertising/29.pl:13
-#, c-format
-msgid "<b>Mandriva Online</b>"
-msgstr "<b>Mandriva Online</b>"
-
-#: share/advertising/29.pl:15
-#, c-format
-msgid ""
-"<b>Mandriva Online</b> is a new premium service that Mandriva is proud to "
-"offer its customers!"
-msgstr ""
-
-#: share/advertising/29.pl:17
-#, c-format
-msgid ""
-"Mandriva Online provides a wide range of valuable services for <b>easily "
-"updating</b> your Mandriva Linux systems:"
-msgstr ""
-
-#: share/advertising/29.pl:18
-#, c-format
-msgid "\t* <b>Perfect</b> system security (automated software updates)."
-msgstr ""
-
-#: share/advertising/29.pl:19
-#, c-format
-msgid ""
-"\t* <b>Notification</b> of updates (by e-mail or by an applet on the "
-"desktop)."
-msgstr ""
-
-#: share/advertising/29.pl:20
-#, c-format
-msgid "\t* Flexible <b>scheduled</b> updates."
-msgstr ""
-
-#: share/advertising/29.pl:21
-#, c-format
-msgid ""
-"\t* Management of <b>all your Mandriva Linux systems</b> with one account."
-msgstr ""
-
-#: share/advertising/30.pl:13
-#, c-format
-msgid "<b>Mandriva Expert</b>"
-msgstr "<b>Mandriva Expert</b>"
-
-#: share/advertising/30.pl:15
-#, c-format
-msgid ""
-"Do you require <b>assistance?</b> Meet Mandriva's technical experts on "
-"<b>our technical support platform</b> www.mandrivaexpert.com."
-msgstr ""
-
-#: share/advertising/30.pl:17
-#, c-format
-msgid ""
-"Thanks to the help of <b>qualified Mandriva Linux experts</b>, you will save "
-"a lot of time."
-msgstr ""
-
-#: share/advertising/30.pl:19
-#, c-format
-msgid ""
-"For any question related to Mandriva Linux, you have the possibility to "
-"purchase support incidents at <b>store.mandriva.com</b>."
-msgstr ""
-
-#: share/compssUsers.pl:25
-#, c-format
-msgid "Office Workstation"
-msgstr "Oficeja laborstacio"
-
-#: share/compssUsers.pl:27
-#, c-format
-msgid ""
-"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
-"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
-msgstr ""
-
-#: share/compssUsers.pl:28
-#, c-format
-msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
-msgstr ""
-
-#: share/compssUsers.pl:33
-#, c-format
-msgid "Game station"
-msgstr "Ludstacio"
-
-#: share/compssUsers.pl:34
-#, c-format
-msgid "Amusement programs: arcade, boards, strategy, etc"
-msgstr ""
-
-#: share/compssUsers.pl:37
-#, c-format
-msgid "Multimedia station"
-msgstr "Plurmediaj stacio"
-
-#: share/compssUsers.pl:38
-#, c-format
-msgid "Sound and video playing/editing programs"
-msgstr ""
-
-#: share/compssUsers.pl:43
-#, c-format
-msgid "Internet station"
-msgstr "Interreta stacio"
-
-#: share/compssUsers.pl:44
-#, c-format
-msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr ""
-
-#: share/compssUsers.pl:49
-#, c-format
-msgid "Network Computer (client)"
-msgstr "Reta computilo (kliento)"
-
-#: share/compssUsers.pl:50
-#, c-format
-msgid "Clients for different protocols including ssh"
-msgstr ""
-
-#: share/compssUsers.pl:54
-#, c-format
-msgid "Configuration"
-msgstr "Konfigurado"
-
-#: share/compssUsers.pl:55
-#, fuzzy, c-format
-msgid "Tools to ease the configuration of your computer"
-msgstr "Ĉu vi deziras provi la konfiguraĵon?"
-
-#: share/compssUsers.pl:59
-#, c-format
-msgid "Console Tools"
-msgstr "Konsoliloj"
-
-#: share/compssUsers.pl:60
-#, c-format
-msgid "Editors, shells, file tools, terminals"
-msgstr "Redaktiloj, ŝeloj, dosieriloj, terminaloj"
-
-#: share/compssUsers.pl:65 share/compssUsers.pl:165
-#, c-format
-msgid "C and C++ development libraries, programs and include files"
-msgstr "C kaj C++ programadaj bibliotekoj, programoj kaj ĉapdosieroj"
-
-#: share/compssUsers.pl:69 share/compssUsers.pl:169
-#, c-format
-msgid "Documentation"
-msgstr "Dokumentaro"
-
-#: share/compssUsers.pl:70 share/compssUsers.pl:170
-#, c-format
-msgid "Books and Howto's on Linux and Free Software"
-msgstr ""
-
-#: share/compssUsers.pl:74 share/compssUsers.pl:173
-#, c-format
-msgid "LSB"
-msgstr "LSB"
-
-#: share/compssUsers.pl:75 share/compssUsers.pl:174
-#, c-format
-msgid "Linux Standard Base. Third party applications support"
-msgstr ""
-
-#: share/compssUsers.pl:85
-#, c-format
-msgid "Apache"
-msgstr "Apache"
-
-#: share/compssUsers.pl:88
-#, fuzzy, c-format
-msgid "Groupware"
-msgstr "Laborgrupo"
-
-#: share/compssUsers.pl:89
-#, c-format
-msgid "Kolab Server"
-msgstr "Kolab Servilo"
-
-#: share/compssUsers.pl:92 share/compssUsers.pl:133
-#, c-format
-msgid "Firewall/Router"
-msgstr ""
-
-#: share/compssUsers.pl:93 share/compssUsers.pl:134
-#, c-format
-msgid "Internet gateway"
-msgstr "Interreta kluzo"
-
-#: share/compssUsers.pl:96
-#, c-format
-msgid "Mail/News"
-msgstr "Poŝto/Novaĵoj"
-
-#: share/compssUsers.pl:97
-#, c-format
-msgid "Postfix mail server, Inn news server"
-msgstr "Postfix poŝta servilo, Inn novaĵaj servilo"
-
-#: share/compssUsers.pl:100
-#, fuzzy, c-format
-msgid "Directory Server"
-msgstr "Restaŭru de disketo"
-
-#: share/compssUsers.pl:104
-#, c-format
-msgid "FTP Server"
-msgstr "FTP Servilo"
-
-#: share/compssUsers.pl:105
-#, c-format
-msgid "ProFTPd"
-msgstr "ProFTPd"
-
-#: share/compssUsers.pl:108
-#, c-format
-msgid "DNS/NIS"
-msgstr "DNS/NIS"
-
-#: share/compssUsers.pl:109
-#, fuzzy, c-format
-msgid "Domain Name and Network Information Server"
-msgstr "Domajn-nom-servilo"
-
-#: share/compssUsers.pl:112
-#, c-format
-msgid "File and Printer Sharing Server"
-msgstr "Dosier- kaj printil-kundivida servilo"
-
-#: share/compssUsers.pl:113
-#, c-format
-msgid "NFS Server, Samba server"
-msgstr "NFS servilo, Samba servilo"
-
-#: share/compssUsers.pl:116 share/compssUsers.pl:129
-#, c-format
-msgid "Database"
-msgstr "Datumbazoj"
-
-#: share/compssUsers.pl:117
-#, c-format
-msgid "PostgreSQL and MySQL Database Server"
-msgstr ""
-
-#: share/compssUsers.pl:121
-#, c-format
-msgid "Web/FTP"
-msgstr "TTT/FTP"
-
-#: share/compssUsers.pl:122
-#, c-format
-msgid "Apache, Pro-ftpd"
-msgstr "Apache, Pro-ftpd"
-
-#: share/compssUsers.pl:125
-#, c-format
-msgid "Mail"
-msgstr "Poŝto"
-
-#: share/compssUsers.pl:126
-#, c-format
-msgid "Postfix mail server"
-msgstr "Postfix poŝta servilo"
-
-#: share/compssUsers.pl:130
-#, c-format
-msgid "PostgreSQL or MySQL database server"
-msgstr ""
-
-#: share/compssUsers.pl:137
-#, c-format
-msgid "Network Computer server"
-msgstr "Reta computilo (servilo)"
-
-#: share/compssUsers.pl:138
-#, c-format
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
-
-#: share/compssUsers.pl:146
-#, c-format
-msgid "KDE Workstation"
-msgstr "KDE Laborstacio"
-
-#: share/compssUsers.pl:147
-#, c-format
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
-msgstr ""
-
-#: share/compssUsers.pl:151
-#, c-format
-msgid "GNOME Workstation"
-msgstr "Gnoma Laborstacio"
-
-#: share/compssUsers.pl:152
-#, c-format
-msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
-msgstr ""
-
-#: share/compssUsers.pl:155
-#, c-format
-msgid "Other Graphical Desktops"
-msgstr ""
-
-#: share/compssUsers.pl:156
-#, c-format
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
-msgstr ""
-
-#: share/compssUsers.pl:179
-#, c-format
-msgid "Utilities"
-msgstr "Iloj"
-
-#: share/compssUsers.pl:181 share/compssUsers.pl:182 standalone/logdrake:382
-#, c-format
-msgid "SSH Server"
-msgstr "SSH servilo"
-
-#: share/compssUsers.pl:186
-#, fuzzy, c-format
-msgid "Webmin"
-msgstr "Webcam"
-
-#: share/compssUsers.pl:187
-#, fuzzy, c-format
-msgid "Webmin Remote Configuration Server"
-msgstr "Interreta Konfigurado"
-
-#: share/compssUsers.pl:191
-#, fuzzy, c-format
-msgid "Network Utilities/Monitoring"
-msgstr "Reta Konfiguraĵo"
-
-#: share/compssUsers.pl:192
-#, c-format
-msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
-msgstr ""
-
-#: share/compssUsers.pl:196
-#, fuzzy, c-format
-msgid "Mandriva Wizards"
-msgstr "Konekti al la interreto"
-
-#: share/compssUsers.pl:197
-#, fuzzy, c-format
-msgid "Wizards to configure server"
-msgstr "Malsukcesis konfiguri la printilon \"%s\"!"
-
-#: standalone.pm:21
-#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-msgstr ""
-"Tiu ĉi programo estas libera softvaro; vi povas redisdoni ĝin kaj/aŭ modifi\n"
-"ĝin sub la termoj de la GNU-Ĝeneralpublika Licenco kiel publikigita de\n"
-"la Libera Programar Fondaĵo (Free Software Foundation); aŭ versio 2, aŭ\n"
-"laŭ via opcio) pli posta versio.\n"
-"\n"
-"Tiu ĉi programo estas disdonata kun la espero ke ĝi estu utila,\n"
-"sed SEN IA GARANTIO; eĉ sen garantio pri MERKATOTAUXGECO aŭ\n"
-"TAUXGECO POR APARTA CELO.  Vidu la\n"
-"GNU Ĝeneralpublikan Licencon pri pli da detaloj.\n"
-"\n"
-"Vi devus esti ricevinta kopion de la GNU Ĝeneralpublika Licenco\n"
-"kun tiu ĉi programo; se ne, skribu al la Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: standalone.pm:40
-#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Savkopi- kaj Restaŭro-akplikaĵo\n"
-"\n"
-"--default             : savu defaŭltajn dosierujojn.\n"
-"--debug               : montru ĉiujn ripar-mesaĝojn (debug).\n"
-"--show-conf           : listo de dosieroj aŭ dosierujoj savendaj.\n"
-"--config-info         : klarigu la opciojn de konfigurado-dosieroj (por ne-X-"
-"uzuloj).\n"
-"--daemon              : uzu demonan konfiguradon. \n"
-"--help                : montru tiun ĉi mesaĝon.\n"
-"--version             : montru la versi-numeron.\n"
-
-#: standalone.pm:52
-#, c-format
-msgid ""
-"[--boot] [--splash]\n"
-"OPTIONS:\n"
-"  --boot            - enable to configure boot loader\n"
-"  --splash          - enable to configure boot theme\n"
-"default mode: offer to configure autologin feature"
-msgstr ""
-
-#: standalone.pm:57
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of Mandriva Linux tools\n"
-"  --incident        - program should be one of Mandriva Linux tools"
-msgstr ""
-"[OPCIOJ] [PROGRAM_NOMO]\n"
-"\n"
-"OPCIOJ:\n"
-"  --help            - montru tiun help-mesaĝon.\n"
-"  --report          - programo estu iu de Mandriva Linux iloj\n"
-"  --incident        - programo estu iu de Mandriva Linux iloj"
-
-#: standalone.pm:63
-#, c-format
-msgid ""
-"[--add]\n"
-"  --add             - \"add a network interface\" wizard\n"
-"  --del             - \"delete a network interface\" wizard\n"
-"  --skip-wizard     - manage connections\n"
-"  --internet        - configure internet\n"
-"  --wizard          - like --add"
-msgstr ""
-
-#: standalone.pm:69
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Font Importation and monitoring application\n"
-"\n"
-"OPTIONS:\n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--install        : accept any font file and any directory.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"Litertipar-Import-kaj afiŝ- aplikaĵo                                     \n"
-"--windows_import : importu de ĉiuj atingeblaj vindozaj subdiskoj.\n"
-"--xls_fonts      : montru ĉiujn litertiparojn jam ekzistantajn de xls\n"
-"--strong         : forta kontrolado de litertiparo.\n"
-"--install        : akceptu ĉian litertipar-dosieron kaj ĉian dosierujon.\n"
-"--uninstall      : malinstalu ĉian litertiparon kaj ĉian litertiparan "
-"dosierujon.\n"
-"--replace        : anstataŭigu ĉian litertiparon se jam ekzistas\n"
-"--application    : 0 nenia aplikaĵo.\n"
-"                 : 1 ĉiuj haveblaj aplikaĵoj subtenataj.\n"
-"                 : name_of_application aŭ iel tiel  por staroffice \n"
-"                 : kaj gs por ghostscript nur por tiu ĉi."
-
-#: standalone.pm:84
-#, fuzzy, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandriva Linux Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
-"[OPCIOJ]...\n"
-"Konfigurilo de Mandriva-Terminal-Servilo\n"
-"--enable         : ebligu MTS\n"
-"--disable        : malebligu MTS\n"
-"--start          : startigu MTS\n"
-"--stop           : haltigu MTS\n"
-"--adduser        : aldonu ekzistantan sistem-uzulon al MTS (postulas "
-"uzulnomon)\n"
-"--deluser        : forigu ekzistantan sistem-uzulon de MTS (postulas "
-"uzulnomon)\n"
-"--addclient      : aldonu kliento-maŝinon al MTS (postulas MAC-adreson, IP, "
-"nbi image-nomon)\n"
-"--delclient      : forigu kliento-maŝinon de MTS (postulas MAC-adreson, IP, "
-"nbi image nomon)"
-
-#: standalone.pm:96
-#, c-format
-msgid "[keyboard]"
-msgstr "[klavaro]"
-
-#: standalone.pm:97
-#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-
-#: standalone.pm:98
-#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : do not be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPCIOJ]\n"
-"Reto & Interret-konektad kaj afiŝad-aplikaĵo\n"
-"\n"
-"--defaultintf interface : montras tiun interfacon defaŭlte\n"
-"--connect : konektas kun interreto se ne jam konektite\n"
-"--disconnect : malkonektas de interreto se jam konektite\n"
-"--force : uzata kun (dis)connect : trudas (mal-)konektadon.\n"
-"--status : montras 1 se konektite, alie 0, poste eliras.\n"
-"--quiet : ne estu interaktiva. Uzata kun (dis)connect."
-
-#: standalone.pm:107
-#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-
-#: standalone.pm:108
-#, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      do not ask first confirmation question in Mandriva "
-"Update mode\n"
-"  --no-verify-rpm        do not verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPCIO]...\n"
-"  --no-confirmation      ne postulu unue konfirmadon en Mandriva Update "
-"mode\n"
-"  --no-verify-rpm       ne kontrolu la pakaĵ-subskribojn\n"
-"  --changelog-first      afiŝu changelog antaŭ dosierliston en la priskribo-"
-"fenestro\n"
-"  --merge-all-rpmnew     proponu mergi ĉiujn trovitajn .rpmnew/.rpmsave -"
-"dosierojn"
-
-#: standalone.pm:113
-#, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-
-#: standalone.pm:114
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
-" [ĉio]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-
-#: standalone.pm:146
-#, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Uzado: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: standalone/XFdrake:61
-#, fuzzy, c-format
-msgid "You need to reboot for changes to take effect"
-msgstr "Vi bezonos restarti antaŭ ol la ŝanĝo povas efektiviĝi"
-
-#: standalone/XFdrake:92
-#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr ""
-"Bonvole adiaŭu kaj sekve uzu Kontrol-Alt-Retropaŝo (Ctrl-Alt-Backspace)."
-
-#: standalone/XFdrake:96
-#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
-
-#: standalone/drakTermServ:75
-#, c-format
-msgid "Useless without Terminal Server"
-msgstr ""
-
-#: standalone/drakTermServ:107 standalone/drakTermServ:113
-#, c-format
-msgid "%s: %s requires a username...\n"
-msgstr ""
-
-#: standalone/drakTermServ:124
-#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
-msgstr ""
-
-#: standalone/drakTermServ:130
-#, c-format
-msgid "%s: %s requires hostname...\n"
-msgstr ""
-
-#: standalone/drakTermServ:212 standalone/drakTermServ:215
-#, fuzzy, c-format
-msgid "Terminal Server Configuration"
-msgstr "Interreta Konfigurado"
-
-#: standalone/drakTermServ:221
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Datumbazoj"
-
-#: standalone/drakTermServ:227
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Datumbazoj"
-
-#: standalone/drakTermServ:233
-#, c-format
-msgid "Start Server"
-msgstr "Lanĉu servon"
-
-#: standalone/drakTermServ:239
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS Servilo"
-
-#: standalone/drakTermServ:248
-#, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
-
-#: standalone/drakTermServ:252
-#, c-format
-msgid "Net Boot Images"
-msgstr ""
-
-#: standalone/drakTermServ:259
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Aldonu uzanto"
-
-#: standalone/drakTermServ:263
-#, c-format
-msgid "Add/Del Clients"
-msgstr ""
-
-#: standalone/drakTermServ:271
-#, c-format
-msgid "Images"
-msgstr "Bildoj"
-
-#: standalone/drakTermServ:272
-#, c-format
-msgid "Clients/Users"
-msgstr ""
-
-#: standalone/drakTermServ:290 standalone/drakbug:47
-#, c-format
-msgid "First Time Wizard"
-msgstr "Unuafoja Sorĉilo"
-
-#: standalone/drakTermServ:326 standalone/drakTermServ:327
-#, c-format
-msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
-msgstr ""
-
-#: standalone/drakTermServ:333
-#, c-format
-msgid ""
-"\n"
-" This wizard routine will:\n"
-" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
-"\t2) Setup DHCP.\n"
-"\t\n"
-"After doing these steps, the wizard will:\n"
-"\t\n"
-"    a) Make all "
-"nbis.                                                                \n"
-"    b) Activate the "
-"server.                                                          \n"
-"    c) Start the "
-"server.                                                     \n"
-"    d) Synchronize the shadow files so that all users, including root, \n"
-"       are added to the shadow$$CLIENT$$ "
-"file.                                              \n"
-"    e) Ask you to make a boot floppy.\n"
-"    f) If it's thin clients, ask if you want to restart KDM.\n"
-msgstr ""
-
-#: standalone/drakTermServ:378
-#, fuzzy, c-format
-msgid "Cancel Wizard"
-msgstr "Lanĉu userdrake"
-
-#: standalone/drakTermServ:393
-#, c-format
-msgid "Please save dhcpd config!"
-msgstr ""
-
-#: standalone/drakTermServ:421
-#, c-format
-msgid "Use thin clients."
-msgstr ""
-
-#: standalone/drakTermServ:423
-#, c-format
-msgid "Sync client X keyboard settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:425
-#, c-format
-msgid ""
-"Please select default client type.\n"
-"    'Thin' clients run everything off the server's CPU/RAM, using the client "
-"display.\n"
-"    'Fat' clients use their own CPU/RAM but the server's filesystem."
-msgstr ""
-
-#: standalone/drakTermServ:445
-#, c-format
-msgid "Creating net boot images for all kernels"
-msgstr ""
-
-#: standalone/drakTermServ:446 standalone/drakTermServ:766
-#: standalone/drakTermServ:782
-#, c-format
-msgid "This will take a few minutes."
-msgstr ""
-
-#: standalone/drakTermServ:455 standalone/drakTermServ:496
-#, fuzzy, c-format
-msgid "Done!"
-msgstr "Finata"
-
-#: standalone/drakTermServ:467 standalone/drakTermServ:847
-#, c-format
-msgid "%s failed"
-msgstr ""
-
-#: standalone/drakTermServ:476
-#, c-format
-msgid ""
-"Not enough space to create\n"
-"NBIs in %s.\n"
-"Needed: %d MB, Free: %d MB"
-msgstr ""
-
-#: standalone/drakTermServ:482
-#, c-format
-msgid "Syncing server user list with client list, including root."
-msgstr ""
-
-#: standalone/drakTermServ:502
-#, c-format
-msgid ""
-"In order to enable changes made for thin clients, the display manager must "
-"be restarted. Restart now?"
-msgstr ""
-
-#: standalone/drakTermServ:537
-#, fuzzy, c-format
-msgid "Terminal Server Overview"
-msgstr "Interreta Konfigurado"
-
-#: standalone/drakTermServ:538
-#, c-format
-msgid ""
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-"        \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-"        \tinterface to help manage/customize these images. To create the "
-"file \n"
-"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
-msgstr ""
-
-#: standalone/drakTermServ:544
-#, c-format
-msgid ""
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-"        \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-"        \tthese entries.\n"
-"\t\t\t\n"
-"        \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
-
-#: standalone/drakTermServ:562
-#, c-format
-msgid ""
-"        While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-"        a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"        of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
-"while fat clients run \n"
-"        most software on the client machine. A special inittab, %s is\n"
-"        written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"        modified if thin clients are used, to enable XDMCP. Since there are "
-"security issues in \n"
-"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"        subnet.\n"
-"\t\t\t\n"
-"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"        be 'true' or 'false'.  'true' enables root login at the client "
-"machine and allows local \n"
-"        hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-"        by creating separate config files associated with the client's IP "
-"address and creating \n"
-"        read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"        with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-"        Note: You must stop/start the server after adding or changing "
-"clients."
-msgstr ""
-
-#: standalone/drakTermServ:582
-#, c-format
-msgid ""
-"        - Maintain /etc/exports:\n"
-"        \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \tdiskless clients.\n"
-"\n"
-"        \tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t/\t\t\t\t\t(ro,all_squash)\n"
-"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"        \tWith SUBNET/MASK being defined for your network."
-msgstr ""
-
-#: standalone/drakTermServ:594
-#, c-format
-msgid ""
-"        - Maintain %s:\n"
-"        \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-"        \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
-
-#: standalone/drakTermServ:598
-#, c-format
-msgid ""
-"        - Per client %s:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tdrakTermServ will help create these files."
-msgstr ""
-
-#: standalone/drakTermServ:603
-#, c-format
-msgid ""
-"        - Per client system configuration files:\n"
-"        \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-"        \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be\n"
-"        turned back off, retaining the configuration files, once the client "
-"machine is configured."
-msgstr ""
-
-#: standalone/drakTermServ:612
-#, c-format
-msgid ""
-"        - /etc/xinetd.d/tftp:\n"
-"        \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-"        \teach diskless client.\n"
-"\n"
-"        \tA typical TFTP configuration file looks like:\n"
-"        \t\t\n"
-"        \tservice tftp\n"
-"\t\t\t{\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t}\n"
-"        \t\t\n"
-"        \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \tputs its images."
-msgstr ""
-
-#: standalone/drakTermServ:633
-#, c-format
-msgid ""
-"        - Create etherboot floppies/CDs:\n"
-"        \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-"        \tor CD to initiate the boot sequence.  drakTermServ will help "
-"generate these\n"
-"        \timages, based on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
-msgstr ""
-
-#: standalone/drakTermServ:666
-#, c-format
-msgid "Boot Floppy"
-msgstr ""
-
-#: standalone/drakTermServ:668
-#, c-format
-msgid "Boot ISO"
-msgstr ""
-
-#: standalone/drakTermServ:670
-#, fuzzy, c-format
-msgid "PXE Image"
-msgstr "Kerna bildo"
-
-#: standalone/drakTermServ:731
-#, fuzzy, c-format
-msgid "Default kernel version"
-msgstr "Kerna versio"
-
-#: standalone/drakTermServ:734
-#, c-format
-msgid "Create PXE images."
-msgstr ""
-
-#: standalone/drakTermServ:764
-#, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
-
-#: standalone/drakTermServ:771
-#, c-format
-msgid "No kernel selected!"
-msgstr ""
-
-#: standalone/drakTermServ:774
-#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
-
-#: standalone/drakTermServ:778
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Ne konektita"
-
-#: standalone/drakTermServ:781
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
-
-#: standalone/drakTermServ:796
-#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Forigu"
-
-#: standalone/drakTermServ:801
-#, fuzzy, c-format
-msgid "No image selected!"
-msgstr "Ne konektita"
-
-#: standalone/drakTermServ:804
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Elektu dosieron"
-
-#: standalone/drakTermServ:933
-#, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-
-#: standalone/drakTermServ:938
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Aldonu uzanto"
-
-#: standalone/drakTermServ:944
-#, c-format
-msgid "<-- Del User"
-msgstr ""
-
-#: standalone/drakTermServ:980
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Speco: "
-
-#: standalone/drakTermServ:984
-#, c-format
-msgid "local config: %s"
-msgstr ""
-
-#: standalone/drakTermServ:1014
-#, fuzzy, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr "Post-instala konfigurado"
-
-#: standalone/drakTermServ:1023
-#, c-format
-msgid "No net boot images created!"
-msgstr ""
-
-#: standalone/drakTermServ:1042
-#, c-format
-msgid "Thin Client"
-msgstr ""
-
-#: standalone/drakTermServ:1046
-#, c-format
-msgid "Allow Thin Clients"
-msgstr ""
-
-#: standalone/drakTermServ:1047
-#, c-format
-msgid ""
-"Sync client X keyboard\n"
-" settings with server."
-msgstr ""
-
-#: standalone/drakTermServ:1048
-#, c-format
-msgid "Add Client -->"
-msgstr ""
-
-#: standalone/drakTermServ:1062
-#, fuzzy, c-format
-msgid "type: fat"
-msgstr "Speco: "
-
-#: standalone/drakTermServ:1063
-#, fuzzy, c-format
-msgid "type: thin"
-msgstr "Speco: "
-
-#: standalone/drakTermServ:1070
-#, fuzzy, c-format
-msgid "local config: false"
-msgstr "Lokaj dosieroj"
-
-#: standalone/drakTermServ:1071
-#, fuzzy, c-format
-msgid "local config: true"
-msgstr "ne konfigurita"
-
-#: standalone/drakTermServ:1079
-#, c-format
-msgid "<-- Edit Client"
-msgstr ""
-
-#: standalone/drakTermServ:1105
-#, c-format
-msgid "Disable Local Config"
-msgstr ""
-
-#: standalone/drakTermServ:1112
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "Forigu"
-
-#: standalone/drakTermServ:1121
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Mi konfiguras..."
-
-#: standalone/drakTermServ:1136
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
-
-#: standalone/drakTermServ:1181
-#, c-format
-msgid "Thin clients will not work with autologin. Disable autologin?"
-msgstr ""
-
-#: standalone/drakTermServ:1197
-#, c-format
-msgid "All clients will use %s"
-msgstr ""
-
-#: standalone/drakTermServ:1231
-#, c-format
-msgid "Subnet:"
-msgstr ""
-
-#: standalone/drakTermServ:1238
-#, c-format
-msgid "Netmask:"
-msgstr "Retmasko:"
-
-#: standalone/drakTermServ:1245
-#, c-format
-msgid "Routers:"
-msgstr ""
-
-#: standalone/drakTermServ:1252
-#, c-format
-msgid "Subnet Mask:"
-msgstr ""
-
-#: standalone/drakTermServ:1259
-#, c-format
-msgid "Broadcast Address:"
-msgstr ""
-
-#: standalone/drakTermServ:1266
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Domajna nomo"
-
-#: standalone/drakTermServ:1274
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS Servilo"
-
-#: standalone/drakTermServ:1285
-#, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: standalone/drakTermServ:1286
-#, c-format
-msgid "IP Range End:"
-msgstr ""
-
-#: standalone/drakTermServ:1328
-#, c-format
-msgid "Append TS Includes To Existing Config"
-msgstr ""
-
-#: standalone/drakTermServ:1330
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "rekonfiguru"
-
-#: standalone/drakTermServ:1346
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakTermServ:1347
-#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: standalone/drakTermServ:1350
-#, c-format
-msgid ""
-"Dynamic IP Address Pool\n"
-"(needed for PXE clients):"
-msgstr ""
-
-#: standalone/drakTermServ:1503
-#, c-format
-msgid "Write to %s failed!"
-msgstr ""
-
-#: standalone/drakTermServ:1515
-#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "Enŝovu disketon en drajvo %s"
-
-#: standalone/drakTermServ:1519
-#, c-format
-msgid "Could not access the floppy!"
-msgstr ""
-
-#: standalone/drakTermServ:1521
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
-
-#: standalone/drakTermServ:1524
-#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Neniu disketilo havebla"
-
-#: standalone/drakTermServ:1530
-#, c-format
-msgid "PXE image is %s/%s"
-msgstr ""
-
-#: standalone/drakTermServ:1532
-#, fuzzy, c-format
-msgid "Error writing %s/%s"
-msgstr "Eraro skribante al dosiero %s"
-
-#: standalone/drakTermServ:1542
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
-
-#: standalone/drakTermServ:1544
-#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr ""
-
-#: standalone/drakTermServ:1565
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
-
-#: standalone/drakTermServ:1724
-#, c-format
-msgid "%s passwd bad in Terminal Server - rewriting...\n"
-msgstr ""
-
-#: standalone/drakTermServ:1737
-#, fuzzy, c-format
-msgid "%s is not a user..\n"
-msgstr "neniu retkarto trovita"
-
-#: standalone/drakTermServ:1738
-#, c-format
-msgid "%s is already a Terminal Server user\n"
-msgstr ""
-
-#: standalone/drakTermServ:1740
-#, c-format
-msgid "Addition of %s to Terminal Server failed!\n"
-msgstr ""
-
-#: standalone/drakTermServ:1742
-#, c-format
-msgid "%s added to Terminal Server\n"
-msgstr ""
-
-#: standalone/drakTermServ:1759
-#, fuzzy, c-format
-msgid "Deleted %s...\n"
-msgstr "Duobla surmetingo %s"
-
-#: standalone/drakTermServ:1761 standalone/drakTermServ:1834
-#, fuzzy, c-format
-msgid "%s not found...\n"
-msgstr "neniu retkarto trovita"
-
-#: standalone/drakTermServ:1862
-#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr ""
-
-#: standalone/drakTermServ:2002
-#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
-msgstr ""
-
-#: standalone/drakautoinst:38
-#, c-format
-msgid "Error!"
-msgstr "Eraro!"
-
-#: standalone/drakautoinst:39
-#, c-format
-msgid "I can not find needed image file `%s'."
-msgstr ""
-
-#: standalone/drakautoinst:41
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Post-instala konfigurado"
-
-#: standalone/drakautoinst:42
-#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Press ok to continue."
-msgstr ""
-
-#: standalone/drakautoinst:60
-#, fuzzy, c-format
-msgid "replay"
-msgstr "Reludu"
-
-#: standalone/drakautoinst:60 standalone/drakautoinst:69
-#, c-format
-msgid "manual"
-msgstr ""
-
-#: standalone/drakautoinst:64
-#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Post-instala konfigurado"
-
-#: standalone/drakautoinst:65
-#, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-
-#: standalone/drakautoinst:77 standalone/drakautoinst:78
-#: standalone/drakautoinst:92
-#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Kreas aŭtoinstalan disketon"
-
-#: standalone/drakautoinst:90
-#, fuzzy, c-format
-msgid "Insert another blank floppy in drive %s (for drivers disk)"
-msgstr "Enŝovu malplenan disketon en drajvo %s"
-
-#: standalone/drakautoinst:91
-#, fuzzy, c-format
-msgid "Creating auto install floppy (drivers disk)"
-msgstr "Kreas aŭtoinstalan disketon"
-
-#: standalone/drakautoinst:158
-#, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: standalone/drakautoinst:252 standalone/drakgw:597 standalone/drakvpn:902
-#: standalone/scannerdrake:405
-#, c-format
-msgid "Congratulations!"
-msgstr "Gratulojn!"
-
-#: standalone/drakautoinst:253
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-
-#: standalone/drakautoinst:289
-#, c-format
-msgid "Auto Install"
-msgstr "Meminstalo"
-
-#: standalone/drakautoinst:358
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Aldonu uzulon"
-
-#: standalone/drakautoinst:365
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Formatas retrokonektan dosieron %s"
-
-#: standalone/drakbackup:153
-#, c-format
-msgid ""
-"Expect is an extension to the TCL scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
-
-#: standalone/drakbackup:154
-#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
-
-#: standalone/drakbackup:155
-#, c-format
-msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
-msgstr ""
-
-#: standalone/drakbackup:156
-#, c-format
-msgid ""
-"This option will save files that have changed.  Exact behavior depends on "
-"whether incremental or differential mode is used."
-msgstr ""
-
-#: standalone/drakbackup:157
-#, c-format
-msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
-msgstr ""
-
-#: standalone/drakbackup:158
-#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
-msgstr ""
-
-#: standalone/drakbackup:159
-#, c-format
-msgid ""
-"This should be a local user or email address that you want the backup "
-"results sent to. You will need to define a functioning mail server."
-msgstr ""
-
-#: standalone/drakbackup:160
-#, c-format
-msgid ""
-"This should be the return address that you want the backup results sent "
-"from. Default is drakbakup."
-msgstr ""
-
-#: standalone/drakbackup:161
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
-msgstr ""
-
-#: standalone/drakbackup:162
-#, c-format
-msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media.  Enabling this option will remove the hard drive "
-"tar files after the backup."
-msgstr ""
-
-#: standalone/drakbackup:163
-#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end.  Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
-msgstr ""
-
-#: standalone/drakbackup:164
-#, c-format
-msgid ""
-"Custom allows you to specify your own day and time.  The other options use "
-"run-parts in /etc/crontab."
-msgstr ""
-
-#: standalone/drakbackup:327
-#, c-format
-msgid "No media selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:331
-#, c-format
-msgid "No interval selected for cron operation."
-msgstr ""
-
-#: standalone/drakbackup:378
-#, c-format
-msgid "Interval cron not available as non-root"
-msgstr ""
-
-#: standalone/drakbackup:465 standalone/logdrake:438
-#, c-format
-msgid "\"%s\" neither is a valid email nor is an existing local user!"
-msgstr ""
-
-#: standalone/drakbackup:469 standalone/logdrake:443
-#, c-format
-msgid ""
-"\"%s\" is a local user, but you did not select a local smtp, so you must use "
-"a complete email address!"
-msgstr ""
-
-#: standalone/drakbackup:478
-#, c-format
-msgid "Valid user list changed, rewriting config file."
-msgstr ""
-
-#: standalone/drakbackup:480
-#, c-format
-msgid "Old user list:\n"
-msgstr ""
-
-#: standalone/drakbackup:482
-#, c-format
-msgid "New user list:\n"
-msgstr ""
-
-#: standalone/drakbackup:511
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-msgstr ""
-
-#: standalone/drakbackup:512
-#, c-format
-msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-msgstr ""
-
-#: standalone/drakbackup:518
-#, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:543 standalone/drakbackup:614
-#: standalone/drakbackup:670
-#, fuzzy, c-format
-msgid "Total progress"
-msgstr "Provu pordojn"
-
-#: standalone/drakbackup:596
-#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-
-#: standalone/drakbackup:605
-#, c-format
-msgid "This may take a moment to generate the keys."
-msgstr ""
-
-#: standalone/drakbackup:612
-#, fuzzy, c-format
-msgid "Cannot spawn %s."
-msgstr "Ne povis malfermi %s por skribi: %s\n"
-
-#: standalone/drakbackup:629
-#, c-format
-msgid "No password prompt on %s at port %s"
-msgstr ""
-
-#: standalone/drakbackup:630
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Neniu pasvorto"
-
-#: standalone/drakbackup:631
-#, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
-
-#: standalone/drakbackup:632
-#, fuzzy, c-format
-msgid "Can not find %s on %s"
-msgstr "Ne povis malfermi %s por skribi: %s\n"
-
-#: standalone/drakbackup:636
-#, c-format
-msgid "%s not responding"
-msgstr ""
-
-#: standalone/drakbackup:640
-#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
-
-#: standalone/drakbackup:690
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr ""
-
-#: standalone/drakbackup:694
-#, c-format
-msgid "Does not appear to be recordable media!"
-msgstr ""
-
-#: standalone/drakbackup:699
-#, c-format
-msgid "Not erasable media!"
-msgstr ""
-
-#: standalone/drakbackup:741
-#, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
-
-#: standalone/drakbackup:799
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
-
-#: standalone/drakbackup:826
-#, c-format
-msgid "No tape in %s!"
-msgstr ""
-
-#: standalone/drakbackup:932
-#, c-format
-msgid ""
-"Backup destination quota exceeded!\n"
-"%d MB used vs %d MB allocated."
-msgstr ""
-
-#: standalone/drakbackup:951 standalone/drakbackup:983
-#, c-format
-msgid "Backup system files..."
-msgstr ""
-
-#: standalone/drakbackup:984 standalone/drakbackup:1024
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1023
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1057
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1058
-#, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr ""
-
-#: standalone/drakbackup:1063
-#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1080 standalone/drakbackup:1103
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1089
-#, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-
-#: standalone/drakbackup:1090
-#, c-format
-msgid ""
-"Error during sending file via FTP. Please correct your FTP configuration."
-msgstr ""
-
-#: standalone/drakbackup:1092
-#, c-format
-msgid "file list sent by FTP: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:1108
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1113
-#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:1122
-#, c-format
-msgid "Error sending mail. Your report mail was not sent."
-msgstr ""
-
-#: standalone/drakbackup:1123
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Eraro legante dosiero %s"
-
-#: standalone/drakbackup:1153
-#, c-format
-msgid "Can not create catalog!"
-msgstr ""
-
-#: standalone/drakbackup:1392
-#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
-msgstr ""
-
-#: standalone/drakbackup:1393
-#, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
-
-#: standalone/drakbackup:1394
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1395 standalone/drakbackup:1459
-#: standalone/drakbackup:1525
-#, c-format
-msgid "Use Incremental/Differential Backups  (do not replace old backups)"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Incremental Backups"
-msgstr ""
-
-#: standalone/drakbackup:1397 standalone/drakbackup:1461
-#: standalone/drakbackup:1527
-#, c-format
-msgid "Use Differential Backups"
-msgstr ""
-
-#: standalone/drakbackup:1399
-#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
-
-#: standalone/drakbackup:1400
-#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-
-#: standalone/drakbackup:1431
-#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Bonvole, elektu la pakaĵojn kiujn vi deziras instali."
-
-#: standalone/drakbackup:1458
-#, c-format
-msgid "Do not include the browser cache"
-msgstr ""
-
-#: standalone/drakbackup:1512
-#, c-format
-msgid "Select the files or directories and click on 'OK'"
-msgstr ""
-
-#: standalone/drakbackup:1513 standalone/drakfont:657
-#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Malinstalu printvicon"
-
-#: standalone/drakbackup:1576
-#, c-format
-msgid "Users"
-msgstr "Uzuloj"
-
-#: standalone/drakbackup:1596
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1598
-#, c-format
-msgid "Net Method:"
-msgstr ""
-
-#: standalone/drakbackup:1602
-#, c-format
-msgid "Use Expect for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1603
-#, c-format
-msgid "Create/Transfer backup keys for SSH"
-msgstr ""
-
-#: standalone/drakbackup:1605
-#, c-format
-msgid "Transfer Now"
-msgstr ""
-
-#: standalone/drakbackup:1607
-#, c-format
-msgid "Other (not drakbackup) keys in place already"
-msgstr ""
-
-#: standalone/drakbackup:1610
-#, fuzzy, c-format
-msgid "Host name or IP."
-msgstr "Poŝtejo"
-
-#: standalone/drakbackup:1615
-#, c-format
-msgid "Directory (or module) to put the backup on this host."
-msgstr ""
-
-#: standalone/drakbackup:1627
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Neniu pasvorto"
-
-#: standalone/drakbackup:1643
-#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-
-#: standalone/drakbackup:1734
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr ""
-
-#: standalone/drakbackup:1737
-#, fuzzy, c-format
-msgid "Choose your CD/DVD device"
-msgstr "Bonvole, elektu vian klavaran aranĝon."
-
-#: standalone/drakbackup:1742
-#, fuzzy, c-format
-msgid "Choose your CD/DVD media size"
-msgstr "Bonvole, elektu vian klavaran aranĝon."
-
-#: standalone/drakbackup:1749
-#, fuzzy, c-format
-msgid "Multisession CD"
-msgstr "Plurmedia - Sono"
-
-#: standalone/drakbackup:1751
-#, c-format
-msgid "CDRW media"
-msgstr ""
-
-#: standalone/drakbackup:1757
-#, fuzzy, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "Bonvolu klaki sur subdiskon"
-
-#: standalone/drakbackup:1758
-#, c-format
-msgid " Erase Now "
-msgstr ""
-
-#: standalone/drakbackup:1764
-#, c-format
-msgid "DVD+RW media"
-msgstr ""
-
-#: standalone/drakbackup:1766
-#, fuzzy, c-format
-msgid "DVD-R media"
-msgstr "aparato"
-
-#: standalone/drakbackup:1768
-#, fuzzy, c-format
-msgid "DVDRAM device"
-msgstr "aparato"
-
-#: standalone/drakbackup:1799
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Elektu dosieron"
-
-#: standalone/drakbackup:1841
-#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1844
-#, c-format
-msgid "Device name to use for backup"
-msgstr ""
-
-#: standalone/drakbackup:1850
-#, c-format
-msgid "Backup directly to tape"
-msgstr ""
-
-#: standalone/drakbackup:1856
-#, fuzzy, c-format
-msgid "Do not rewind tape after backup"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1862
-#, fuzzy, c-format
-msgid "Erase tape before backup"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1868
-#, fuzzy, c-format
-msgid "Eject tape after the backup"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:1944
-#, fuzzy, c-format
-msgid "Enter the directory to save to:"
-msgstr "Bonvole, provu la muson"
-
-#: standalone/drakbackup:1948
-#, fuzzy, c-format
-msgid "Directory to save to"
-msgstr "Bonvole, provu la muson"
-
-#: standalone/drakbackup:1953
-#, c-format
-msgid ""
-"Maximum disk space\n"
-" allocated for backups (MB)"
-msgstr ""
-
-#: standalone/drakbackup:1957
-#, c-format
-msgid ""
-"Delete incremental or differential\n"
-" backups older than N days\n"
-" (0 is keep all backups) to save space"
-msgstr ""
-
-#: standalone/drakbackup:2024
-#, c-format
-msgid "CD-R / DVD-R"
-msgstr ""
-
-#: standalone/drakbackup:2029
-#, c-format
-msgid "HardDrive / NFS"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2045
-#: standalone/drakbackup:2050
-#, c-format
-msgid "hourly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2046
-#: standalone/drakbackup:2051
-#, c-format
-msgid "daily"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2047
-#: standalone/drakbackup:2052
-#, c-format
-msgid "weekly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2048
-#: standalone/drakbackup:2053
-#, c-format
-msgid "monthly"
-msgstr ""
-
-#: standalone/drakbackup:2044 standalone/drakbackup:2049
-#: standalone/drakbackup:2054
-#, fuzzy, c-format
-msgid "custom"
-msgstr "Akomodata"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "January"
-msgstr "Januaro"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "February"
-msgstr "Februaro"
-
-#: standalone/drakbackup:2058
-#, c-format
-msgid "March"
-msgstr "Marto"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "April"
-msgstr "Aprilo"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "May"
-msgstr "Majo"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "June"
-msgstr "Junio"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "July"
-msgstr "Julio"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "August"
-msgstr "Aŭgusto"
-
-#: standalone/drakbackup:2059
-#, c-format
-msgid "September"
-msgstr "Septembro"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "October"
-msgstr "Oktobro"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "November"
-msgstr "Novembro"
-
-#: standalone/drakbackup:2060
-#, c-format
-msgid "December"
-msgstr "Decembro"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Sunday"
-msgstr "dimanĉo"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Monday"
-msgstr "lundo"
-
-#: standalone/drakbackup:2063
-#, c-format
-msgid "Tuesday"
-msgstr "mardo"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Wednesday"
-msgstr "merkredo"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Thursday"
-msgstr "ĵaŭdo"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Friday"
-msgstr "vendredo"
-
-#: standalone/drakbackup:2064
-#, c-format
-msgid "Saturday"
-msgstr "sabato"
-
-#: standalone/drakbackup:2096
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Salutnomo"
-
-#: standalone/drakbackup:2100
-#, fuzzy, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "Bonvole, elektu la pakaĵojn kiujn vi deziras instali."
-
-#: standalone/drakbackup:2106
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
-
-#: standalone/drakbackup:2111
-#, c-format
-msgid "Minute"
-msgstr "Minuto"
-
-#: standalone/drakbackup:2115
-#, c-format
-msgid "Hour"
-msgstr "Horo"
-
-#: standalone/drakbackup:2119
-#, c-format
-msgid "Day"
-msgstr "Tago"
-
-#: standalone/drakbackup:2123
-#, c-format
-msgid "Month"
-msgstr "Monato"
-
-#: standalone/drakbackup:2127
-#, fuzzy, c-format
-msgid "Weekday"
-msgstr "merkredo"
-
-#: standalone/drakbackup:2133
-#, fuzzy, c-format
-msgid "Please choose the media for backup."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: standalone/drakbackup:2139
-#, fuzzy, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "Bonvole, elektu la pakaĵojn kiujn vi deziras instali."
-
-#: standalone/drakbackup:2140
-#, c-format
-msgid ""
-"If your machine is not on all the time, you might want to install anacron."
-msgstr ""
-
-#: standalone/drakbackup:2141
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
-
-#: standalone/drakbackup:2188
-#, fuzzy, c-format
-msgid "Please choose the compression type"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: standalone/drakbackup:2192
-#, fuzzy, c-format
-msgid "Use .backupignore files"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:2194
-#, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
-
-#: standalone/drakbackup:2200
-#, c-format
-msgid "Return address for sent mail:"
-msgstr ""
-
-#: standalone/drakbackup:2206
-#, fuzzy, c-format
-msgid "SMTP server for mail:"
-msgstr "Poŝtejo de SMB servilo"
-
-#: standalone/drakbackup:2211
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
-
-#: standalone/drakbackup:2254
-#, c-format
-msgid "What"
-msgstr ""
-
-#: standalone/drakbackup:2259
-#, fuzzy, c-format
-msgid "Where"
-msgstr "Rado"
-
-#: standalone/drakbackup:2264
-#, fuzzy, c-format
-msgid "When"
-msgstr "Rado"
-
-#: standalone/drakbackup:2269
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Modulaj opcioj:"
-
-#: standalone/drakbackup:2282
-#, fuzzy, c-format
-msgid "Backup destination not configured..."
-msgstr "Ekrano ne estas konfigurata"
-
-#: standalone/drakbackup:2302 standalone/drakbackup:4226
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Reta Konfiguraĵo"
-
-#: standalone/drakbackup:2318
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Bonvole, elektu la pakaĵojn kiujn vi deziras instali."
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Hard Drive used to prepare backups for all media"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "Across Network"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On CD-R"
-msgstr ""
-
-#: standalone/drakbackup:2321
-#, c-format
-msgid "On Tape Device"
-msgstr ""
-
-#: standalone/drakbackup:2367
-#, c-format
-msgid "Backup Users"
-msgstr ""
-
-#: standalone/drakbackup:2368
-#, fuzzy, c-format
-msgid " (Default is all users)"
-msgstr "Loka printilo"
-
-#: standalone/drakbackup:2381
-#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Bonvole, elektu la pakaĵojn kiujn vi deziras instali."
-
-#: standalone/drakbackup:2382
-#, fuzzy, c-format
-msgid "Backup System"
-msgstr "Dosiersistemo konfiguro"
-
-#: standalone/drakbackup:2384
-#, c-format
-msgid "Select user manually"
-msgstr ""
-
-#: standalone/drakbackup:2413
-#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: standalone/drakbackup:2485
-#, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
-
-#: standalone/drakbackup:2486
-#, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
-
-#: standalone/drakbackup:2488
-#, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
-
-#: standalone/drakbackup:2490
-#, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
-
-#: standalone/drakbackup:2492
-#, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2493
-#, c-format
-msgid "\tLimit disk usage to %s MB\n"
-msgstr ""
-
-#: standalone/drakbackup:2494
-#, c-format
-msgid "\tDelete backups older than %s day(s)\n"
-msgstr ""
-
-#: standalone/drakbackup:2497
-#, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
-
-#: standalone/drakbackup:2502
-#, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
-
-#: standalone/drakbackup:2503
-#, c-format
-msgid "RW"
-msgstr "L/S"
-
-#: standalone/drakbackup:2504
-#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Musaparato: %s\n"
-
-#: standalone/drakbackup:2505
-#, c-format
-msgid " (multi-session)"
-msgstr ""
-
-#: standalone/drakbackup:2506
-#, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-
-#: standalone/drakbackup:2507
-#, c-format
-msgid "\t\tErase=%s"
-msgstr ""
-
-#: standalone/drakbackup:2509
-#, c-format
-msgid "\tBackup directly to Tape\n"
-msgstr ""
-
-#: standalone/drakbackup:2511
-#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2512
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-
-#: standalone/drakbackup:2513
-#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opcioj"
-
-#: standalone/drakbackup:2514
-#, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
-
-#: standalone/drakbackup:2516
-#, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
-
-#: standalone/drakbackup:2517
-#, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
-
-#: standalone/drakbackup:2518
-#, fuzzy, c-format
-msgid "\tBackups use tar only\n"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:2520
-#, fuzzy, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:2521
-#, c-format
-msgid "\tSend mail to %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2522
-#, c-format
-msgid "\tSend mail from %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2523
-#, fuzzy, c-format
-msgid "\tUsing SMTP server %s\n"
-msgstr "Ĉe CUPS-servilo \"%s\""
-
-#: standalone/drakbackup:2525
-#, c-format
-msgid ""
-"\n"
-"- Daemon, %s via:\n"
-msgstr ""
-
-#: standalone/drakbackup:2526
-#, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
-
-#: standalone/drakbackup:2527
-#, c-format
-msgid "\t-CD-R.\n"
-msgstr ""
-
-#: standalone/drakbackup:2528
-#, c-format
-msgid "\t-Tape \n"
-msgstr ""
-
-#: standalone/drakbackup:2529
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
-
-#: standalone/drakbackup:2530
-#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
-
-#: standalone/drakbackup:2531
-#, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
-
-#: standalone/drakbackup:2533
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
-
-#: standalone/drakbackup:2538
-#, c-format
-msgid ""
-"List of data to restore:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:2540
-#, fuzzy, c-format
-msgid "- Restore System Files.\n"
-msgstr "Malinstalu printvicon"
-
-#: standalone/drakbackup:2542 standalone/drakbackup:2552
-#, c-format
-msgid "   - from date: %s %s\n"
-msgstr ""
-
-#: standalone/drakbackup:2545
-#, fuzzy, c-format
-msgid "- Restore User Files: \n"
-msgstr "Restaŭru de dosiero"
-
-#: standalone/drakbackup:2550
-#, fuzzy, c-format
-msgid "- Restore Other Files: \n"
-msgstr "Restaŭru de dosiero"
-
-#: standalone/drakbackup:2729
-#, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
-
-#: standalone/drakbackup:2731
-#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Bonvole, elektu al kiu seria pordo estas via modemo konektata?"
-
-#: standalone/drakbackup:2741
-#, c-format
-msgid "Backup files are corrupted"
-msgstr ""
-
-#: standalone/drakbackup:2762
-#, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
-
-#: standalone/drakbackup:2763
-#, c-format
-msgid "          Successfully Restored on %s       "
-msgstr ""
-
-#: standalone/drakbackup:2883
-#, fuzzy, c-format
-msgid "         Restore Configuration       "
-msgstr "Reta Konfiguraĵo"
-
-#: standalone/drakbackup:2911
-#, c-format
-msgid "OK to restore the other files."
-msgstr ""
-
-#: standalone/drakbackup:2927
-#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr ""
-
-#: standalone/drakbackup:2992
-#, fuzzy, c-format
-msgid "Please choose the date to restore:"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: standalone/drakbackup:3029
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Restaŭru de disketo"
-
-#: standalone/drakbackup:3031
-#, fuzzy, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "Bonvole, provu la muson"
-
-#: standalone/drakbackup:3035
-#, c-format
-msgid "Directory with backups"
-msgstr ""
-
-#: standalone/drakbackup:3089
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: standalone/drakbackup:3091
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Alia"
-
-#: standalone/drakbackup:3096
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Instalu sistemon"
-
-#: standalone/drakbackup:3097
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Restaŭru de dosiero"
-
-#: standalone/drakbackup:3098
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Restaŭru de dosiero"
-
-#: standalone/drakbackup:3100
-#, fuzzy, c-format
-msgid "Select path to restore (instead of /)"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: standalone/drakbackup:3104 standalone/drakbackup:3386
-#, fuzzy, c-format
-msgid "Path To Restore To"
-msgstr "Akomodata"
-
-#: standalone/drakbackup:3107
-#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
-
-#: standalone/drakbackup:3109
-#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
-
-#: standalone/drakbackup:3194
-#, c-format
-msgid "Filename text substring to search for (empty string matches all):"
-msgstr ""
-
-#: standalone/drakbackup:3197
-#, c-format
-msgid "Search Backups"
-msgstr ""
-
-#: standalone/drakbackup:3215
-#, fuzzy, c-format
-msgid "No matches found..."
-msgstr "Loka printilo"
-
-#: standalone/drakbackup:3219
-#, fuzzy, c-format
-msgid "Restore Selected"
-msgstr "Malinstalu printvicon"
-
-#: standalone/drakbackup:3354
-#, c-format
-msgid ""
-"Click date/time to see backup files.\n"
-"Ctrl-Click files to select multiple files."
-msgstr ""
-
-#: standalone/drakbackup:3360
-#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
-msgstr ""
-
-#: standalone/drakbackup:3369
-#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Malinstalu printvicon"
-
-#: standalone/drakbackup:3446
-#, c-format
-msgid "Backup files not found at %s."
-msgstr ""
-
-#: standalone/drakbackup:3459
-#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Restaŭru de disketo"
-
-#: standalone/drakbackup:3459
-#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
-
-#: standalone/drakbackup:3461
-#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3471
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Sava subdiskotabelo"
-
-#: standalone/drakbackup:3471
-#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-
-#: standalone/drakbackup:3473
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
-
-#: standalone/drakbackup:3484
-#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Restaŭru de dosiero"
-
-#: standalone/drakbackup:3484
-#, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
-
-#: standalone/drakbackup:3485
-#, fuzzy, c-format
-msgid "Host Name"
-msgstr "Poŝtejo"
-
-#: standalone/drakbackup:3486
-#, c-format
-msgid "Host Path or Module"
-msgstr ""
-
-#: standalone/drakbackup:3493
-#, fuzzy, c-format
-msgid "Password required"
-msgstr "Pasvorto"
-
-#: standalone/drakbackup:3499
-#, fuzzy, c-format
-msgid "Username required"
-msgstr "Salutnomo"
-
-#: standalone/drakbackup:3502
-#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Poŝtejo: "
-
-#: standalone/drakbackup:3507
-#, c-format
-msgid "Path or Module required"
-msgstr ""
-
-#: standalone/drakbackup:3520
-#, c-format
-msgid "Files Restored..."
-msgstr ""
-
-#: standalone/drakbackup:3523
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Restaŭru de dosiero"
-
-#: standalone/drakbackup:3541
-#, fuzzy, c-format
-msgid "%s not retrieved..."
-msgstr "neniu retkarto trovita"
-
-#: standalone/drakbackup:3762 standalone/drakbackup:3831
-#, fuzzy, c-format
-msgid "Search for files to restore"
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: standalone/drakbackup:3766
-#, c-format
-msgid "Restore all backups"
-msgstr ""
-
-#: standalone/drakbackup:3774
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Akomodata"
-
-#: standalone/drakbackup:3778 standalone/drakbackup:3827
-#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Sava subdiskotabelo"
-
-#: standalone/drakbackup:3799
-#, fuzzy, c-format
-msgid "Unable to find backups to restore...\n"
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: standalone/drakbackup:3800
-#, fuzzy, c-format
-msgid "Verify that %s is the correct path"
-msgstr "Ĉu tiu ĉi konfigurado ĝustas?"
-
-#: standalone/drakbackup:3801
-#, c-format
-msgid " and the CD is in the drive"
-msgstr ""
-
-#: standalone/drakbackup:3803
-#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
-msgstr ""
-
-#: standalone/drakbackup:3819
-#, c-format
-msgid "CD in place - continue."
-msgstr ""
-
-#: standalone/drakbackup:3824
-#, c-format
-msgid "Browse to new restore repository."
-msgstr ""
-
-#: standalone/drakbackup:3825
-#, fuzzy, c-format
-msgid "Directory To Restore From"
-msgstr "Restaŭru de disketo"
-
-#: standalone/drakbackup:3861
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Restaŭru de dosiero"
-
-#: standalone/drakbackup:3972
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:4005 standalone/drakbackup:4325
-#, c-format
-msgid "Restore"
-msgstr "Restarigu"
-
-#: standalone/drakbackup:4093 standalone/harddrake2:477
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "La sekvaj pakaĵoj estos instalataj"
-
-#: standalone/drakbackup:4120
-#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Bonvole, elektu lingvon por uzi."
-
-#: standalone/drakbackup:4160
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:4163
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:4166
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Malbona rezerva dosiero"
-
-#: standalone/drakbackup:4169 standalone/drakbackup:4203
-#, c-format
-msgid "Total Progress"
-msgstr ""
-
-#: standalone/drakbackup:4195
-#, fuzzy, c-format
-msgid "Sending files by FTP"
-msgstr "Konservu en dosiero"
-
-#: standalone/drakbackup:4198
-#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Konservu en dosiero"
-
-#: standalone/drakbackup:4268
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Reta Konfiguraĵo"
-
-#: standalone/drakbackup:4273
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Reta Konfiguraĵo"
-
-#: standalone/drakbackup:4299
-#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakbackup:4304
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakbackup:4309
-#, fuzzy, c-format
-msgid "View Configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakbackup:4313
-#, c-format
-msgid "View Last Log"
-msgstr ""
-
-#: standalone/drakbackup:4318
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Dosiersistemo konfiguro"
-
-#: standalone/drakbackup:4322
-#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
-msgstr ""
-
-#: standalone/drakbackup:4342 standalone/drakbackup:4345
-#, c-format
-msgid "Drakbackup"
-msgstr ""
-
-#: standalone/drakboot:76 standalone/drakfloppy:47 standalone/harddrake2:189
-#: standalone/harddrake2:190 standalone/harddrake2:191 standalone/logdrake:70
-#: standalone/printerdrake:138 standalone/printerdrake:139
-#: standalone/printerdrake:140
-#, c-format
-msgid "/_File"
-msgstr "/_Dosiero"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/logdrake:76
-#, c-format
-msgid "/File/_Quit"
-msgstr "/Dosiero/_Foriru"
-
-#: standalone/drakboot:77 standalone/drakfloppy:48 standalone/harddrake2:191
-#: standalone/logdrake:76 standalone/printerdrake:140
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
-
-#: standalone/drakboot:117
-#, c-format
-msgid "Text only"
-msgstr ""
-
-#: standalone/drakboot:118
-#, c-format
-msgid "Verbose"
-msgstr ""
-
-#: standalone/drakboot:119
-#, c-format
-msgid "Silent"
-msgstr ""
-
-#: standalone/drakboot:126
-#, c-format
-msgid ""
-"Your system bootloader is not in framebuffer mode. To activate graphical "
-"boot, select a graphic video mode from the bootloader configuration tool."
-msgstr ""
-
-#: standalone/drakboot:127
-#, fuzzy, c-format
-msgid "Do you want to configure it now?"
-msgstr "Ĉu vi deziras provi la konfiguraĵon?"
-
-#: standalone/drakboot:136
-#, fuzzy, c-format
-msgid "Install themes"
-msgstr "Instalu sistemon"
-
-#: standalone/drakboot:138
-#, fuzzy, c-format
-msgid "Graphical boot theme selection"
-msgstr "Printilan Konekton"
-
-#: standalone/drakboot:143
-#, c-format
-msgid "Theme"
-msgstr "Etoso"
-
-#: standalone/drakboot:146
-#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-
-#: standalone/drakboot:151
-#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Kreu novan subdiskon"
-
-#: standalone/drakboot:183
-#, fuzzy, c-format
-msgid "Default user"
-msgstr "Loka printilo"
-
-#: standalone/drakboot:184
-#, fuzzy, c-format
-msgid "Default desktop"
-msgstr "Defaŭlta"
-
-#: standalone/drakboot:187
-#, c-format
-msgid "No, I do not want autologin"
-msgstr ""
-
-#: standalone/drakboot:188
-#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-
-#: standalone/drakboot:195
-#, c-format
-msgid "System mode"
-msgstr "Sistema modalo"
-
-#: standalone/drakboot:198
-#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr ""
-
-#: standalone/drakboot:264
-#, c-format
-msgid ""
-"Please choose a video mode, it will be applied to each of the boot entries "
-"selected below.\n"
-"Be sure your video card supports the mode you choose."
-msgstr ""
-
-#: standalone/drakbug:41
-#, fuzzy, c-format
-msgid "Mandriva Linux Bug Report Tool"
-msgstr "Konekti al la interreto"
-
-#: standalone/drakbug:46
-#, c-format
-msgid "Mandriva Linux Control Center"
-msgstr "Mandriva Linux-Regejo"
-
-#: standalone/drakbug:48
-#, c-format
-msgid "Synchronization tool"
-msgstr ""
-
-#: standalone/drakbug:49 standalone/drakbug:63 standalone/drakbug:148
-#: standalone/drakbug:150 standalone/drakbug:154
-#, c-format
-msgid "Standalone Tools"
-msgstr ""
-
-#: standalone/drakbug:50
-#, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
-
-#: standalone/drakbug:51
-#, c-format
-msgid "Mandriva Online"
-msgstr "Mandriva Online"
-
-#: standalone/drakbug:52
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "Spertulo"
-
-#: standalone/drakbug:53
-#, fuzzy, c-format
-msgid "Msec"
-msgstr "Muso"
-
-#: standalone/drakbug:54
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Malproksima printilo"
-
-#: standalone/drakbug:55
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Opuza nomo"
-
-#: standalone/drakbug:56
-#, c-format
-msgid "Urpmi"
-msgstr ""
-
-#: standalone/drakbug:57
-#, c-format
-msgid "Windows Migration tool"
-msgstr ""
-
-#: standalone/drakbug:58
-#, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
-
-#: standalone/drakbug:59
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "ISDN-a Konfiguraĵon"
-
-#: standalone/drakbug:81
-#, c-format
-msgid "Select Mandriva Tool:"
-msgstr ""
-
-#: standalone/drakbug:82
-#, c-format
-msgid ""
-"or Application Name\n"
-"(or Full Path):"
-msgstr ""
-
-#: standalone/drakbug:85
-#, c-format
-msgid "Find Package"
-msgstr "Trovu pakaĵon"
-
-#: standalone/drakbug:87
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Elektado de Pakaĵoj"
-
-#: standalone/drakbug:88
-#, c-format
-msgid "Kernel:"
-msgstr "Operaciumkerno:"
-
-#: standalone/drakbug:100
-#, c-format
-msgid ""
-"To submit a bug report, click on the report button.  \n"
-"This will open a web browser window on %s where you'll find a form to fill "
-"in.  The information displayed above will be transferred to that server.  \n"
-"Things useful to include in your report are the output of lspci, kernel "
-"version, and /proc/cpuinfo."
-msgstr ""
-
-#: standalone/drakbug:106
-#, fuzzy, c-format
-msgid "Report"
-msgstr "porto"
-
-#: standalone/drakbug:163
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Eliru instalprogramon"
-
-#: standalone/drakbug:175
-#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Eliru instalprogramon"
-
-#: standalone/drakclock:29
-#, c-format
-msgid "DrakClock"
-msgstr "DrakHorloĝo"
-
-#: standalone/drakclock:39
-#, fuzzy, c-format
-msgid "not defined"
-msgstr "ne konfigurita"
-
-#: standalone/drakclock:41
-#, fuzzy, c-format
-msgid "Change Time Zone"
-msgstr "Horzono"
-
-#: standalone/drakclock:45
-#, c-format
-msgid "Timezone - DrakClock"
-msgstr "Horzono - DrakHorloĝo"
-
-#: standalone/drakclock:47
-#, c-format
-msgid "GMT - DrakClock"
-msgstr "GMT - DrakHorloĝo"
-
-#: standalone/drakclock:47
-#, fuzzy, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "Aparata horloĝo estas ĝustigita laŭ GMT"
-
-#: standalone/drakclock:75
-#, fuzzy, c-format
-msgid "Network Time Protocol"
-msgstr "Reta interfaco"
-
-#: standalone/drakclock:77
-#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
-msgstr ""
-
-#: standalone/drakclock:78
-#, c-format
-msgid "Enable Network Time Protocol"
-msgstr ""
-
-#: standalone/drakclock:86
-#, c-format
-msgid "Server:"
-msgstr "Servilo:"
-
-#: standalone/drakclock:124
-#, c-format
-msgid "Could not synchronize with %s."
-msgstr ""
-
-#: standalone/drakclock:146 standalone/drakclock:156
-#, c-format
-msgid "Reset"
-msgstr "Restarigu"
-
-#: standalone/drakclock:224
-#, fuzzy, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol\n"
-"\n"
-"Do you want to install ntp?"
-msgstr "Ĉi tiu pakaĵo %s devas esti instalita. Ĉu vi deziras instali ĝin?"
-
-#: standalone/drakconnect:86
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ISDN-a Konfiguraĵon"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#: standalone/drakroam:163
-#, c-format
-msgid "Gateway:"
-msgstr "Kluzo:"
-
-#: standalone/drakconnect:97 standalone/drakconnect:822
-#, fuzzy, c-format
-msgid "Interface:"
-msgstr "Interreto"
-
-#: standalone/drakconnect:101 standalone/net_monitor:122
-#, c-format
-msgid "Wait please"
-msgstr ""
-
-#: standalone/drakconnect:117
-#, c-format
-msgid "Interface"
-msgstr "Interfaco"
-
-#: standalone/drakconnect:117 standalone/printerdrake:211
-#: standalone/printerdrake:218
-#, c-format
-msgid "State"
-msgstr "Stato"
-
-#: standalone/drakconnect:134
-#, c-format
-msgid "Hostname: "
-msgstr "Poŝtejo: "
-
-#: standalone/drakconnect:136
-#, fuzzy, c-format
-msgid "Configure hostname..."
-msgstr "Konfiguru muson"
-
-#: standalone/drakconnect:150 standalone/drakconnect:878
-#, c-format
-msgid "LAN configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakconnect:155
-#, fuzzy, c-format
-msgid "Configure Local Area Network..."
-msgstr "Konfiguru lokan reton"
-
-#: standalone/drakconnect:163 standalone/drakconnect:247
-#: standalone/drakconnect:251
-#, c-format
-msgid "Apply"
-msgstr "Apliku"
-
-#: standalone/drakconnect:198
-#, c-format
-msgid "Manage connections"
-msgstr "Mastrumi konektojn"
-
-#: standalone/drakconnect:225
-#, fuzzy, c-format
-msgid "Device selected"
-msgstr "Malinstalu printvicon"
-
-#: standalone/drakconnect:307
-#, fuzzy, c-format
-msgid "IP configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakconnect:346
-#, fuzzy, c-format
-msgid "DNS servers"
-msgstr "DNA servilo"
-
-#: standalone/drakconnect:354
-#, fuzzy, c-format
-msgid "Search Domain"
-msgstr "NIS Domajno"
-
-#: standalone/drakconnect:362
-#, fuzzy, c-format
-msgid "static"
-msgstr "Aŭtomata IP"
-
-#: standalone/drakconnect:362 standalone/drakroam:144
-#, c-format
-msgid "DHCP"
-msgstr ""
-
-#: standalone/drakconnect:526
-#, c-format
-msgid "Flow control"
-msgstr "Flu-kontrolo"
-
-#: standalone/drakconnect:527
-#, fuzzy, c-format
-msgid "Line termination"
-msgstr "Interreta Konfigurado"
-
-#: standalone/drakconnect:538
-#, fuzzy, c-format
-msgid "Modem timeout"
-msgstr "Winmodem-konekto"
-
-#: standalone/drakconnect:542
-#, fuzzy, c-format
-msgid "Use lock file"
-msgstr "Elektu dosieron"
-
-#: standalone/drakconnect:544
-#, c-format
-msgid "Wait for dialup tone before dialing"
-msgstr ""
-
-#: standalone/drakconnect:547
-#, fuzzy, c-format
-msgid "Busy wait"
-msgstr "Kuvajto"
-
-#: standalone/drakconnect:552
-#, fuzzy, c-format
-msgid "Modem sound"
-msgstr "Modemo"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Enable"
-msgstr "Ŝaltu"
-
-#: standalone/drakconnect:553
-#, c-format
-msgid "Disable"
-msgstr "Malŝaltu"
-
-#: standalone/drakconnect:604 standalone/harddrake2:49
-#, c-format
-msgid "Media class"
-msgstr ""
-
-#: standalone/drakconnect:605 standalone/drakfloppy:136
-#, c-format
-msgid "Module name"
-msgstr "Modulonomo"
-
-#: standalone/drakconnect:606
-#, fuzzy, c-format
-msgid "Mac Address"
-msgstr "IP-adreso"
-
-#: standalone/drakconnect:607 standalone/harddrake2:27
-#: standalone/harddrake2:119
-#, c-format
-msgid "Bus"
-msgstr "Buso"
-
-#: standalone/drakconnect:608 standalone/harddrake2:33
-#, c-format
-msgid "Location on the bus"
-msgstr ""
-
-#: standalone/drakconnect:707 standalone/drakgw:247 standalone/drakpxe:138
-#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Mi ne detektas eterretan retadaptilom sur via sistemo.  Bonvole lanĉu la\n"
-"aparatokonfigurilon."
-
-#: standalone/drakconnect:715
-#, fuzzy, c-format
-msgid "Remove a network interface"
-msgstr "Elektu la retan interfacon"
-
-#: standalone/drakconnect:719
-#, fuzzy, c-format
-msgid "Select the network interface to remove:"
-msgstr "Elektu la retan interfacon"
-
-#: standalone/drakconnect:751
-#, fuzzy, c-format
-msgid ""
-"An error occurred while deleting the \"%s\" network interface:\n"
-"\n"
-"%s"
-msgstr ""
-"Problemo okazis dum restarto de la reto: \n"
-"\n"
-"%s"
-
-#: standalone/drakconnect:752
-#, c-format
-msgid ""
-"Congratulations, the \"%s\" network interface has been successfully deleted"
-msgstr ""
-
-#: standalone/drakconnect:768
-#, c-format
-msgid "No IP"
-msgstr ""
-
-#: standalone/drakconnect:769
-#, fuzzy, c-format
-msgid "No Mask"
-msgstr "Malbona pakaĵo"
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, c-format
-msgid "up"
-msgstr ""
-
-#: standalone/drakconnect:770 standalone/drakconnect:949
-#, fuzzy, c-format
-msgid "down"
-msgstr "Finata"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Connected"
-msgstr "Konektita"
-
-#: standalone/drakconnect:812 standalone/net_monitor:471
-#, c-format
-msgid "Not connected"
-msgstr "Ne konektita"
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Disconnect..."
-msgstr "Malkonektu..."
-
-#: standalone/drakconnect:814
-#, c-format
-msgid "Connect..."
-msgstr "Konektu..."
-
-#: standalone/drakconnect:843
-#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/drakconnect:874
-#, fuzzy, c-format
-msgid "Deactivate now"
-msgstr "Aktiva"
-
-#: standalone/drakconnect:874
-#, fuzzy, c-format
-msgid "Activate now"
-msgstr "Aktiva"
-
-#: standalone/drakconnect:882
-#, c-format
-msgid ""
-"You do not have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-
-#: standalone/drakconnect:896
-#, c-format
-msgid "LAN Configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakconnect:908
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adaptilo %s: %s"
-
-#: standalone/drakconnect:917
-#, c-format
-msgid "Boot Protocol"
-msgstr ""
-
-#: standalone/drakconnect:918
-#, c-format
-msgid "Started on boot"
-msgstr ""
-
-#: standalone/drakconnect:954
-#, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakconnect:1009 standalone/net_applet:61
-#, c-format
-msgid ""
-"You do not have any configured Internet connection.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:1010 standalone/drakroam:42 standalone/net_applet:62
-#, fuzzy, c-format
-msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
-msgstr "Elektu la retan interfacon"
-
-#: standalone/drakconnect:1017
-#, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "Interreta konektaĵo kaj konfiguro"
-
-#: standalone/drakconnect:1035
-#, fuzzy, c-format
-msgid "Third DNS server (optional)"
-msgstr "Unu DNS-a Servilo (nedeviga)"
-
-#: standalone/drakconnect:1057
-#, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "Interreta konektaĵo kaj konfiguro"
-
-#: standalone/drakconnect:1058
-#, c-format
-msgid "Internet access"
-msgstr "Interret-aliro"
-
-#: standalone/drakconnect:1060 standalone/net_monitor:101
-#, c-format
-msgid "Connection type: "
-msgstr "Speco de konekto"
-
-#: standalone/drakconnect:1063
-#, c-format
-msgid "Status:"
-msgstr "Stato:"
-
-#: standalone/drakedm:34
-#, c-format
-msgid "GDM (GNOME Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:35
-#, c-format
-msgid "KDM (KDE Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:36
-#, c-format
-msgid "MdkKDM (Mandriva Linux Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:37
-#, c-format
-msgid "XDM (X Display Manager)"
-msgstr ""
-
-#: standalone/drakedm:55
-#, c-format
-msgid "Choosing a display manager"
-msgstr ""
-
-#: standalone/drakedm:56
-#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-
-#: standalone/drakedm:79
-#, fuzzy, c-format
-msgid "The change is done, do you want to restart the dm service?"
-msgstr ""
-"La reto devas esti restartigita.\n"
-"Ĉu vi deziras restartigi ĝin?"
-
-#: standalone/drakedm:80
-#, c-format
-msgid ""
-"You are going to close all running programs and lose your current session. "
-"Are you really sure that you want to restart the dm service?"
-msgstr ""
-
-#: standalone/drakfloppy:41
-#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
-
-#: standalone/drakfloppy:78
-#, fuzzy, c-format
-msgid "Boot disk creation"
-msgstr "Startdiskokreado"
-
-#: standalone/drakfloppy:79
-#, c-format
-msgid "General"
-msgstr "Ĝenerala"
-
-#: standalone/drakfloppy:82 standalone/harddrake2:146
-#, c-format
-msgid "Device"
-msgstr "Aparato"
-
-#: standalone/drakfloppy:88
-#, fuzzy, c-format
-msgid "Kernel version"
-msgstr "Kerna versio"
-
-#: standalone/drakfloppy:103
-#, c-format
-msgid "Preferences"
-msgstr "Preferoj"
-
-#: standalone/drakfloppy:117
-#, fuzzy, c-format
-msgid "Advanced preferences"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakfloppy:136
-#, c-format
-msgid "Size"
-msgstr "Grandeco"
-
-#: standalone/drakfloppy:139
-#, fuzzy, c-format
-msgid "Mkinitrd optional arguments"
-msgstr "mkinitrd opciaj argumentoj"
-
-#: standalone/drakfloppy:141
-#, c-format
-msgid "force"
-msgstr "devigu"
-
-#: standalone/drakfloppy:142
-#, c-format
-msgid "omit raid modules"
-msgstr "forlasu RAID-ajn modulojn"
-
-#: standalone/drakfloppy:143
-#, c-format
-msgid "if needed"
-msgstr "se bezonata"
-
-#: standalone/drakfloppy:144
-#, c-format
-msgid "omit scsi modules"
-msgstr "forlasu SCSI-ajn modulojn"
-
-#: standalone/drakfloppy:147
-#, c-format
-msgid "Add a module"
-msgstr "Aldonu modulon"
-
-#: standalone/drakfloppy:156
-#, c-format
-msgid "Remove a module"
-msgstr "Forprenu modulon"
-
-#: standalone/drakfloppy:291
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Kontrolu ke medio estas en la aparato %s"
-
-#: standalone/drakfloppy:297
-#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
-"Ne estas medio en aparato %s.\n"
-"Bonvole enŝovu ĝin."
-
-#: standalone/drakfloppy:300
-#, c-format
-msgid "Unable to fork: %s"
-msgstr "Ne povis forki: %s"
-
-#: standalone/drakfloppy:303
-#, fuzzy, c-format
-msgid "Floppy creation completed"
-msgstr "Speco de konekto"
-
-#: standalone/drakfloppy:303
-#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/drakfloppy:308
-#, fuzzy, c-format
-msgid ""
-"Unable to properly close mkbootdisk:\n"
-"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
-msgstr ""
-"Ne povis ĝuste fermi mkbootdisk-on: \n"
-" %s \n"
-" %s"
-
-#: standalone/drakfont:183
-#, c-format
-msgid "Search installed fonts"
-msgstr ""
-
-#: standalone/drakfont:185
-#, c-format
-msgid "Unselect fonts installed"
-msgstr ""
-
-#: standalone/drakfont:208
-#, c-format
-msgid "parse all fonts"
-msgstr ""
-
-#: standalone/drakfont:210
-#, fuzzy, c-format
-msgid "No fonts found"
-msgstr "neniu retkarto trovita"
-
-#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
-#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
-#: standalone/drakfont:412 standalone/drakfont:426
-#, fuzzy, c-format
-msgid "done"
-msgstr "Finata"
-
-#: standalone/drakfont:223
-#, c-format
-msgid "Could not find any font in your mounted partitions"
-msgstr ""
-
-#: standalone/drakfont:258
-#, c-format
-msgid "Reselect correct fonts"
-msgstr ""
-
-#: standalone/drakfont:261
-#, fuzzy, c-format
-msgid "Could not find any font.\n"
-msgstr "Malinstalu printvicon"
-
-#: standalone/drakfont:271
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
-
-#: standalone/drakfont:296
-#, c-format
-msgid "%s fonts conversion"
-msgstr ""
-
-#: standalone/drakfont:325
-#, c-format
-msgid "Fonts copy"
-msgstr ""
-
-#: standalone/drakfont:328
-#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Preparas instaladon"
-
-#: standalone/drakfont:335
-#, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
-
-#: standalone/drakfont:336
-#, c-format
-msgid "True Type install done"
-msgstr ""
-
-#: standalone/drakfont:342 standalone/drakfont:357
-#, c-format
-msgid "type1inst building"
-msgstr ""
-
-#: standalone/drakfont:351
-#, c-format
-msgid "Ghostscript referencing"
-msgstr ""
-
-#: standalone/drakfont:361
-#, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
-
-#: standalone/drakfont:364
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "limigu"
-
-#: standalone/drakfont:410 standalone/drakfont:420
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: standalone/drakfont:422
-#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "limigu"
-
-#: standalone/drakfont:430
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:474 standalone/drakfont:483
-#, c-format
-msgid "DrakFont"
-msgstr ""
-
-#: standalone/drakfont:484
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Surmetingo"
-
-#: standalone/drakfont:490
-#, c-format
-msgid "About"
-msgstr "Pri"
-
-#: standalone/drakfont:492 standalone/drakfont:688 standalone/drakfont:726
-#, c-format
-msgid "Uninstall"
-msgstr "Malinstalo"
-
-#: standalone/drakfont:493
-#, c-format
-msgid "Import"
-msgstr "Importu"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakfont:511
-#, c-format
-msgid ""
-"Copyright (C) 2001-2002 by Mandriva \n"
-"\n"
-"\n"
-"       DUPONT Sebastien (original version)\n"
-"\n"
-"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
-"\n"
-"       VIGNAUD Thierry <tvignaud@mandriva.com>"
-msgstr ""
-
-#: standalone/drakfont:520
-#, fuzzy, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
-msgstr ""
-"Tiu ĉi programo estas libera softvaro; vi povas redisdoni ĝin kaj/aŭ modifi\n"
-"ĝin sub la termoj de la GNU-Ĝeneralpublika Licenco kiel publikigita de\n"
-"la Libera Programar Fondaĵo (Free Software Foundation); aŭ versio 2, aŭ\n"
-"laŭ via opcio) pli posta versio.\n"
-"\n"
-"Tiu ĉi programo estas disdonata kun la espero ke ĝi estu utila,\n"
-"sed SEN IA GARANTIO; eĉ sen garantio pri MERKATOTAUXGECO aŭ\n"
-"TAUXGECO POR APARTA CELO.  Vidu la\n"
-"GNU Ĝeneralpublikan Licencon pri pli da detaloj.\n"
-"\n"
-"Vi devus esti ricevinta kopion de la GNU Ĝeneralpublika Licenco\n"
-"kun tiu ĉi programo; se ne, skribu al la Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-
-#: standalone/drakfont:536
-#, c-format
-msgid ""
-"Thanks:\n"
-"\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-
-#: standalone/drakfont:555
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Elektu la subdiskoj kiuj vi deziras formati"
-
-#: standalone/drakfont:556
-#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
-msgstr ""
-
-#: standalone/drakfont:566
-#, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
-
-#: standalone/drakfont:567
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Oficejo"
-
-#: standalone/drakfont:568
-#, fuzzy, c-format
-msgid "Abiword"
-msgstr "Ĉesigu"
-
-#: standalone/drakfont:569
-#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Printilo"
-
-#: standalone/drakfont:585
-#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
-
-#: standalone/drakfont:586
-#, fuzzy, c-format
-msgid "File Selection"
-msgstr "Elektado de Pakaĵoj"
-
-#: standalone/drakfont:590
-#, c-format
-msgid "Fonts"
-msgstr ""
-
-#: standalone/drakfont:653
-#, fuzzy, c-format
-msgid "Import fonts"
-msgstr "Formatu subdiskojn"
-
-#: standalone/drakfont:658
-#, fuzzy, c-format
-msgid "Install fonts"
-msgstr "Instalu sistemon"
-
-#: standalone/drakfont:693
-#, c-format
-msgid "click here if you are sure."
-msgstr ""
-
-#: standalone/drakfont:695
-#, c-format
-msgid "here if no."
-msgstr ""
-
-#: standalone/drakfont:734
-#, c-format
-msgid "Unselected All"
-msgstr ""
-
-#: standalone/drakfont:737
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Elektu dosieron"
-
-#: standalone/drakfont:740
-#, c-format
-msgid "Remove List"
-msgstr "Forigu liston"
-
-#: standalone/drakfont:751 standalone/drakfont:770
-#, fuzzy, c-format
-msgid "Importing fonts"
-msgstr "Formatu subdiskojn"
-
-#: standalone/drakfont:755 standalone/drakfont:775
-#, c-format
-msgid "Initial tests"
-msgstr ""
-
-#: standalone/drakfont:756
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: standalone/drakfont:757
-#, c-format
-msgid "Install & convert Fonts"
-msgstr ""
-
-#: standalone/drakfont:758
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Instalu"
-
-#: standalone/drakfont:776
-#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: standalone/drakfont:777
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Eliru instalprogramon"
-
-#: standalone/drakgw:58 standalone/drakgw:191
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Disdividado de Interreta Konekto"
-
-#: standalone/drakgw:111 standalone/drakvpn:51
-#, c-format
-msgid "Sorry, we support only 2.4 and above kernels."
-msgstr ""
-
-#: standalone/drakgw:122
-#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: standalone/drakgw:123
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: standalone/drakgw:127 standalone/drakvpn:127
-#, c-format
-msgid "enable"
-msgstr "ebligu"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127
-#, c-format
-msgid "reconfigure"
-msgstr "rekonfiguru"
-
-#: standalone/drakgw:127 standalone/drakgw:154 standalone/drakvpn:101
-#: standalone/drakvpn:127 standalone/drakvpn:376 standalone/drakvpn:735
-#, c-format
-msgid "dismiss"
-msgstr "forsendu"
-
-#: standalone/drakgw:134
-#, c-format
-msgid "Enabling servers..."
-msgstr ""
-
-#: standalone/drakgw:146
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: standalone/drakgw:149
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: standalone/drakgw:150
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: standalone/drakgw:154 standalone/drakvpn:101
-#, c-format
-msgid "disable"
-msgstr "malebligu"
-
-#: standalone/drakgw:157
-#, fuzzy, c-format
-msgid "Disabling servers..."
-msgstr "Detektas aparatojn..."
-
-#: standalone/drakgw:172
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: standalone/drakgw:192
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi ĝian Interretan konekton.\n"
-"Notu: vi bezonas dediĉan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"Ĉu vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-
-#: standalone/drakgw:236
-#, c-format
-msgid "Interface %s (using module %s)"
-msgstr ""
-
-#: standalone/drakgw:237
-#, c-format
-msgid "Interface %s"
-msgstr "Interfaco %s"
-
-#: standalone/drakgw:246 standalone/drakpxe:137
-#, c-format
-msgid "No network adapter on your system!"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: standalone/drakgw:253
-#, c-format
-msgid "Network interface"
-msgstr "Reta interfaco"
-
-#: standalone/drakgw:254
-#, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
-"Ekzitas nur unu konfigurita retadaptilo sur via sistemo:\n"
-"\n"
-"%s\n"
-"\n"
-"Ĉu vi deziras konfiguri vian Lokan Reton (LAN) kun ĉi tiu adaptilo?"
-
-#: standalone/drakgw:260 standalone/drakpxe:142
-#, c-format
-msgid "Choose the network interface"
-msgstr "Elektu la retan interfacon"
-
-#: standalone/drakgw:261
-#, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Bonvole elektu kiun retadaptilon estos konektata al via Loka Reto (LAN)."
-
-#: standalone/drakgw:290
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Ekrano ne estas konfigurata"
-
-#: standalone/drakgw:291
-#, c-format
-msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
-msgstr ""
-
-#: standalone/drakgw:296
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Post-instala konfigurado"
-
-#: standalone/drakgw:296
-#, c-format
-msgid "No (experts only)"
-msgstr ""
-
-#: standalone/drakgw:297
-#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Interreta Konfigurado"
-
-#: standalone/drakgw:298
-#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Interreta Konfigurado"
-
-#: standalone/drakgw:299
-#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
-
-#: standalone/drakgw:312
-#, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakgw:319
-#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "neniu retkarto trovita"
-
-#: standalone/drakgw:323
-#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you do not know the meaning of an option, simply leave it as it is."
-msgstr ""
-
-#: standalone/drakgw:327
-#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP de SMB servilo"
-
-#: standalone/drakgw:328
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP de SMB servilo"
-
-#: standalone/drakgw:329
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Neniu printilo"
-
-#: standalone/drakgw:330
-#, c-format
-msgid "The DHCP start range"
-msgstr ""
-
-#: standalone/drakgw:331
-#, c-format
-msgid "The DHCP end range"
-msgstr ""
-
-#: standalone/drakgw:332
-#, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:333
-#, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
-
-#: standalone/drakgw:334
-#, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
-
-#: standalone/drakgw:341
-#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
-
-#: standalone/drakgw:351
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Ebla konflikto pri Loka-Reta adreso trovata en nuna konfiguro de %s!\n"
-
-#: standalone/drakgw:361
-#, c-format
-msgid "Configuring..."
-msgstr "Mi konfiguras..."
-
-#: standalone/drakgw:362
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Mi konfiguras komandodosierojn, instalas programojn, startas servilojn..."
-
-#: standalone/drakgw:402 standalone/drakpxe:231 standalone/drakvpn:278
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Problemoj instalante pakaĵon %s"
-
-#: standalone/drakgw:598
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP) and\n"
-" a Transparent Proxy Cache server (SQUID)."
-msgstr ""
-
-#: standalone/drakhelp:17
-#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003-2005 Mandriva.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
-msgstr ""
-
-#: standalone/drakhelp:22
-#, c-format
-msgid " --help                - display this help     \n"
-msgstr ""
-
-#: standalone/drakhelp:23
-#, c-format
-msgid ""
-" --id <id_label>       - load the html help page which refers to id_label\n"
-msgstr ""
-
-#: standalone/drakhelp:24
-#, c-format
-msgid ""
-" --doc <link>          - link to another web page ( for WM welcome "
-"frontend)\n"
-msgstr ""
-
-#: standalone/drakhelp:36
-#, fuzzy, c-format
-msgid "Mandriva Linux Help Center"
-msgstr "Irigilo por la Mandrajka helpo"
-
-#: standalone/drakhelp:36
-#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
-msgstr ""
-
-#: standalone/drakperm:22
-#, fuzzy, c-format
-msgid "System settings"
-msgstr "subdiskigo"
-
-#: standalone/drakperm:23
-#, fuzzy, c-format
-msgid "Custom settings"
-msgstr "subdiskigo"
-
-#: standalone/drakperm:24
-#, fuzzy, c-format
-msgid "Custom & system settings"
-msgstr "subdiskigo"
-
-#: standalone/drakperm:44
-#, c-format
-msgid "Editable"
-msgstr "Redaktebla"
-
-#: standalone/drakperm:49 standalone/drakperm:324
-#, c-format
-msgid "Path"
-msgstr "Pado"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "User"
-msgstr "Uzulo"
-
-#: standalone/drakperm:49 standalone/drakperm:251
-#, c-format
-msgid "Group"
-msgstr "Grupo"
-
-#: standalone/drakperm:49 standalone/drakperm:336
-#, c-format
-msgid "Permissions"
-msgstr "Permesoj"
-
-#: standalone/drakperm:58
-#, c-format
-msgid "Add a new rule"
-msgstr ""
-
-#: standalone/drakperm:65 standalone/drakperm:100 standalone/drakperm:125
-#, c-format
-msgid "Edit current rule"
-msgstr ""
-
-#: standalone/drakperm:107
-#, c-format
-msgid ""
-"Here you can see files to use in order to fix permissions, owners, and "
-"groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-
-#: standalone/drakperm:110
-#, c-format
-msgid ""
-"The current security level is %s.\n"
-"Select permissions to see/edit"
-msgstr ""
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Up"
-msgstr "Aktiva"
-
-#: standalone/drakperm:121
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Down"
-msgstr "Malaktiva"
-
-#: standalone/drakperm:122
-#, c-format
-msgid "Move selected rule down one level"
-msgstr ""
-
-#: standalone/drakperm:123
-#, fuzzy, c-format
-msgid "Add a rule"
-msgstr "Aldonu modulon"
-
-#: standalone/drakperm:123
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Neniu printilo"
-
-#: standalone/drakperm:124
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Malinstalu printvicon"
-
-#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakperm:125 standalone/drakups:302 standalone/drakups:362
-#: standalone/drakups:382 standalone/drakvpn:333 standalone/drakvpn:694
-#: standalone/printerdrake:232
-#, c-format
-msgid "Edit"
-msgstr "Redaktu"
-
-#: standalone/drakperm:243
-#, c-format
-msgid "browse"
-msgstr ""
-
-#: standalone/drakperm:248
-#, fuzzy, c-format
-msgid "user"
-msgstr "Muso"
-
-#: standalone/drakperm:248
-#, c-format
-msgid "group"
-msgstr "grupo"
-
-#: standalone/drakperm:248
-#, fuzzy, c-format
-msgid "other"
-msgstr "Alia"
-
-#: standalone/drakperm:253
-#, c-format
-msgid "Read"
-msgstr "Lego"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:256
-#, c-format
-msgid "Enable \"%s\" to read the file"
-msgstr ""
-
-#: standalone/drakperm:260
-#, c-format
-msgid "Write"
-msgstr "Skribo"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:263
-#, c-format
-msgid "Enable \"%s\" to write the file"
-msgstr ""
-
-#: standalone/drakperm:267
-#, c-format
-msgid "Execute"
-msgstr "Faru"
-
-#. -PO: here %s will be either "user", "group" or "other"
-#: standalone/drakperm:270
-#, c-format
-msgid "Enable \"%s\" to execute the file"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid "Sticky-bit"
-msgstr ""
-
-#: standalone/drakperm:273
-#, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Set-UID"
-msgstr ""
-
-#: standalone/drakperm:274
-#, c-format
-msgid "Use owner id for execution"
-msgstr ""
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Set-GID"
-msgstr ""
-
-#: standalone/drakperm:275
-#, c-format
-msgid "Use group id for execution"
-msgstr ""
-
-#: standalone/drakperm:293 standalone/drakxtv:89
-#, c-format
-msgid "User:"
-msgstr "Uzulo:"
-
-#: standalone/drakperm:295
-#, c-format
-msgid "Group:"
-msgstr "Grupo:"
-
-#: standalone/drakperm:299
-#, fuzzy, c-format
-msgid "Current user"
-msgstr "Akceptu uzanto"
-
-#: standalone/drakperm:300
-#, c-format
-msgid "When checked, owner and group will not be changed"
-msgstr ""
-
-#: standalone/drakperm:310
-#, c-format
-msgid "Path selection"
-msgstr "Elekto de pado"
-
-#: standalone/drakperm:330
-#, c-format
-msgid "Property"
-msgstr "Ero"
-
-#: standalone/drakpxe:55
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakpxe:111
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakpxe:112
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"Nun kiam via Interreta konekto estas konfigurata,\n"
-"vi povas konfiguri vian komputilon por disdividi ĝian Interretan konekton.\n"
-"Notu: vi bezonas dediĉan Retadaptilon por konfiguri Lokan Reton (LAN).\n"
-"\n"
-"Ĉu vi deziras konfiguri Disdividadon de Interreta Konekto?\n"
-
-#: standalone/drakpxe:143
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la interreto"
-
-#: standalone/drakpxe:144
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interfaco %s"
-
-#: standalone/drakpxe:169
-#, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:173
-#, c-format
-msgid "The DHCP start ip"
-msgstr ""
-
-#: standalone/drakpxe:174
-#, c-format
-msgid "The DHCP end ip"
-msgstr ""
-
-#: standalone/drakpxe:187
-#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:192
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakpxe:196
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Loka printilo"
-
-#: standalone/drakpxe:197
-#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
-
-#: standalone/drakpxe:210
-#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-
-#: standalone/drakpxe:215
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Kreas aŭtoinstalan disketon"
-
-#: standalone/drakroam:41
-#, c-format
-msgid ""
-"You do not have any wireless interface.\n"
-"Run the \"%s\" assistant from the Mandriva Linux Control Center"
-msgstr ""
-
-#: standalone/drakroam:141
-#, c-format
-msgid "ESSID"
-msgstr ""
-
-#: standalone/drakroam:142 standalone/drakvpn:1143
-#, c-format
-msgid "Mode"
-msgstr "Reĝimo"
-
-#: standalone/drakroam:143 standalone/harddrake2:96
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "Nuligu"
-
-#: standalone/drakroam:145
-#, c-format
-msgid "Key"
-msgstr ""
-
-#: standalone/drakroam:161
-#, c-format
-msgid "Network:"
-msgstr "Reto:"
-
-#: standalone/drakroam:162
-#, c-format
-msgid "IP:"
-msgstr "IP:"
-
-#: standalone/drakroam:164
-#, c-format
-msgid "Mode:"
-msgstr "Moduso:"
-
-#: standalone/drakroam:165
-#, c-format
-msgid "Encryption:"
-msgstr "Ĉifrado:"
-
-#: standalone/drakroam:166
-#, c-format
-msgid "Signal:"
-msgstr ""
-
-#: standalone/drakroam:180
-#, c-format
-msgid "Roaming"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:266
-#, c-format
-msgid "Roaming: %s"
-msgstr ""
-
-#: standalone/drakroam:183 standalone/drakroam:265 standalone/drakvpn:1061
-#: standalone/drakvpn:1077 standalone/drakvpn:1090
-#, c-format
-msgid "off"
-msgstr "malŝaltita"
-
-#: standalone/drakroam:190
-#, c-format
-msgid "Scan interval (sec): "
-msgstr ""
-
-#: standalone/drakroam:193
-#, c-format
-msgid "Set"
-msgstr ""
-
-#: standalone/drakroam:198
-#, c-format
-msgid "Known Networks (Drag up/down or edit)"
-msgstr ""
-
-#: standalone/drakroam:206
-#, c-format
-msgid "Connect"
-msgstr ""
-
-#: standalone/drakroam:214
-#, c-format
-msgid "Available Networks"
-msgstr ""
-
-#: standalone/drakroam:229
-#, c-format
-msgid "Rescan"
-msgstr ""
-
-#: standalone/drakroam:233
-#, c-format
-msgid "Status"
-msgstr "Stato"
-
-#: standalone/drakroam:240
-#, c-format
-msgid "Disconnect"
-msgstr "Malkonektiĝu"
-
-#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:241 standalone/net_applet:90
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh"
-msgstr "Rekalkulu"
-
-#: standalone/drakroam:265 standalone/drakvpn:1061 standalone/drakvpn:1077
-#: standalone/drakvpn:1090
-#, c-format
-msgid "on"
-msgstr "ŝaltita"
-
-#: standalone/draksec:49
-#, c-format
-msgid "ALL"
-msgstr ""
-
-#: standalone/draksec:50
-#, c-format
-msgid "LOCAL"
-msgstr ""
-
-#: standalone/draksec:53
-#, fuzzy, c-format
-msgid "Ignore"
-msgstr "singapuro"
-
-#. -PO: Do not alter the <span ..> and </span> tags.
-#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
-#: standalone/draksec:101
-#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
-"will receive security alerts if the\n"
-"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
-"username or an email.\n"
-"\n"
-"\n"
-"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
-"one of the six preconfigured security levels\n"
-"provided with msec. These levels range from '<span weight=\"bold\">poor</"
-"span>' security and ease of use, to\n"
-"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
-"server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
-msgstr ""
-
-#: standalone/draksec:154 standalone/harddrake2:207
-#, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
-
-#: standalone/draksec:168
-#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Defaŭlta)"
-
-#: standalone/draksec:210
-#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Elektas sekurnivelon"
-
-#: standalone/draksec:217
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Malproksimaj lpd Printilaj Opcioj"
-
-#: standalone/draksec:219
-#, fuzzy, c-format
-msgid "Basic options"
-msgstr "Opcioj"
-
-#: standalone/draksec:233
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Modulaj opcioj:"
-
-#: standalone/draksec:233
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "Modulaj opcioj:"
-
-#: standalone/draksec:268
-#, c-format
-msgid "Periodic Checks"
-msgstr ""
-
-#: standalone/draksec:298
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Elektas sekurnivelon"
-
-#: standalone/draksec:304
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Preparas instaladon"
-
-#: standalone/draksound:47
-#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Ne konektita"
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/draksound:50
-#, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/draksound:57
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
-"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
-msgstr ""
-
-#: standalone/draksplash:26
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-
-#: standalone/draksplash:32
-#, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:33
-#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-
-#: standalone/draksplash:34
-#, c-format
-msgid "text width"
-msgstr ""
-
-#: standalone/draksplash:35
-#, c-format
-msgid "text box height"
-msgstr ""
-
-#: standalone/draksplash:36
-#, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:37
-#, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-
-#: standalone/draksplash:38
-#, c-format
-msgid "the width of the progress bar"
-msgstr ""
-
-#: standalone/draksplash:39
-#, c-format
-msgid "the height of the progress bar"
-msgstr ""
-
-#: standalone/draksplash:56 standalone/draksplash:61
-#, c-format
-msgid "Choose progress bar color"
-msgstr ""
-
-#: standalone/draksplash:57 standalone/draksplash:62
-#, c-format
-msgid "Choose picture"
-msgstr ""
-
-#: standalone/draksplash:58
-#, c-format
-msgid "Silent bootsplash"
-msgstr ""
-
-#: standalone/draksplash:63
-#, c-format
-msgid "Verbose bootsplash"
-msgstr ""
-
-#: standalone/draksplash:65
-#, c-format
-msgid "Display logo on Console"
-msgstr ""
-
-#: standalone/draksplash:68
-#, c-format
-msgid "Console bootsplash"
-msgstr ""
-
-#: standalone/draksplash:74
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Opuza nomo"
-
-#: standalone/draksplash:77
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Distingivo"
-
-#: standalone/draksplash:82
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Instalu sistemon"
-
-#: standalone/draksplash:130
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr ""
-
-#: standalone/draksplash:145
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "Elektu agon"
-
-#: standalone/draksplash:162
-#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Printilan Konekton"
-
-#: standalone/drakups:74
-#, c-format
-msgid "Connected through a serial port or an usb cable"
-msgstr ""
-
-#: standalone/drakups:80
-#, fuzzy, c-format
-msgid "Add an UPS device"
-msgstr "Aldonu uzulon"
-
-#: standalone/drakups:83
-#, c-format
-msgid ""
-"Welcome to the UPS configuration utility.\n"
-"\n"
-"Here, you'll add a new UPS to your system.\n"
-msgstr ""
-
-#: standalone/drakups:90
-#, c-format
-msgid ""
-"We're going to add an UPS device.\n"
-"\n"
-"Do you want to autodetect UPS devices connected to this machine or to "
-"manually select them?"
-msgstr ""
-
-#: standalone/drakups:93
-#, fuzzy, c-format
-msgid "Autodetection"
-msgstr "Memdetekta"
-
-#: standalone/drakups:101 standalone/harddrake2:244
-#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Duobla surmetingo %s"
-
-#: standalone/drakups:120 standalone/drakups:159 standalone/logdrake:450
-#: standalone/logdrake:456
-#, c-format
-msgid "Congratulations"
-msgstr "Gratulojn"
-
-#: standalone/drakups:121
-#, c-format
-msgid "The wizard successfully added the following UPS devices:"
-msgstr ""
-
-#: standalone/drakups:123
-#, fuzzy, c-format
-msgid "No new UPS devices was found"
-msgstr "Loka printilo"
-
-#: standalone/drakups:128 standalone/drakups:140
-#, fuzzy, c-format
-msgid "UPS driver configuration"
-msgstr "Interreta Konfigurado"
-
-#: standalone/drakups:128
-#, fuzzy, c-format
-msgid "Please select your UPS model."
-msgstr "Bonvole, provu la muson"
-
-#: standalone/drakups:129
-#, c-format
-msgid "Manufacturer / Model:"
-msgstr ""
-
-#: standalone/drakups:140
-#, c-format
-msgid ""
-"We are configuring the \"%s\" UPS from \"%s\".\n"
-"Please fill in its name, its driver and its port."
-msgstr ""
-
-#: standalone/drakups:145
-#, c-format
-msgid "Name:"
-msgstr "Nomo:"
-
-#: standalone/drakups:145
-#, c-format
-msgid "The name of your ups"
-msgstr ""
-
-#: standalone/drakups:146
-#, c-format
-msgid "The driver that manages your ups"
-msgstr ""
-
-#: standalone/drakups:147
-#, c-format
-msgid "Port:"
-msgstr "Pordo:"
-
-#: standalone/drakups:149
-#, fuzzy, c-format
-msgid "The port on which is connected your ups"
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-
-#: standalone/drakups:159
-#, c-format
-msgid "The wizard successfully configured the new \"%s\" UPS device."
-msgstr ""
-
-#: standalone/drakups:250
-#, fuzzy, c-format
-msgid "UPS devices"
-msgstr "Servoj"
-
-#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
-#: standalone/harddrake2:84 standalone/harddrake2:110
-#: standalone/harddrake2:117
-#, c-format
-msgid "Name"
-msgstr "Nomo"
-
-#: standalone/drakups:269
-#, fuzzy, c-format
-msgid "UPS users"
-msgstr "Salutnomo"
-
-#: standalone/drakups:285
-#, fuzzy, c-format
-msgid "Access Control Lists"
-msgstr "aliro al retiloj"
-
-#: standalone/drakups:286
-#, c-format
-msgid "IP mask"
-msgstr ""
-
-#: standalone/drakups:298
-#, fuzzy, c-format
-msgid "Rules"
-msgstr "Malakceptu"
-
-#: standalone/drakups:299
-#, c-format
-msgid "Action"
-msgstr "Ago"
-
-#: standalone/drakups:299 standalone/drakvpn:1146 standalone/harddrake2:81
-#, c-format
-msgid "Level"
-msgstr "Nivelo"
-
-#: standalone/drakups:299
-#, fuzzy, c-format
-msgid "ACL name"
-msgstr "LVM-nomo?"
-
-#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
-#, fuzzy, c-format
-msgid "DrakUPS"
-msgstr "Dvorak-a (US)"
-
-#: standalone/drakups:339
-#, fuzzy, c-format
-msgid "Welcome to the UPS configuration tools"
-msgstr "Provu konfiguraĵon"
-
-#: standalone/drakvpn:73
-#, fuzzy, c-format
-msgid "DrakVPN"
-msgstr "Dvorak-a (US)"
-
-#: standalone/drakvpn:95
-#, fuzzy, c-format
-msgid "The VPN connection is enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: standalone/drakvpn:96
-#, fuzzy, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: standalone/drakvpn:105
-#, fuzzy, c-format
-msgid "Disabling VPN..."
-msgstr "Detektas aparatojn..."
-
-#: standalone/drakvpn:114
-#, fuzzy, c-format
-msgid "The VPN connection is now disabled."
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: standalone/drakvpn:121
-#, fuzzy, c-format
-msgid "VPN connection currently disabled"
-msgstr "Disdividado de Interreta Konekto nuntempe malkapabligata"
-
-#: standalone/drakvpn:122
-#, fuzzy, c-format
-msgid ""
-"The setup of a VPN connection has already been done.\n"
-"\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"La konfigurado de la disdividado de la Interreta konekto jam estas farita.\n"
-
-#: standalone/drakvpn:135
-#, fuzzy, c-format
-msgid "Enabling VPN..."
-msgstr "Instalanta pakaĵo %s"
-
-#: standalone/drakvpn:141
-#, fuzzy, c-format
-msgid "The VPN connection is now enabled."
-msgstr "Disdividado de Interreta Konekto nuntempe kapabligata"
-
-#: standalone/drakvpn:155 standalone/drakvpn:183
-#, c-format
-msgid "Simple VPN setup."
-msgstr ""
-
-#: standalone/drakvpn:156
-#, c-format
-msgid ""
-"You are about to configure your computer to use a VPN connection.\n"
-"\n"
-"With this feature, computers on your local private network and computers\n"
-"on some other remote private networks, can share resources, through\n"
-"their respective firewalls, over the Internet, in a secure manner. \n"
-"\n"
-"The communication over the Internet is encrypted. The local and remote\n"
-"computers look as if they were on the same network.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using\n"
-"drakconnect before going any further."
-msgstr ""
-
-#: standalone/drakvpn:184
-#, c-format
-msgid ""
-"VPN connection.\n"
-"\n"
-"This program is based on the following projects:\n"
-" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
-" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
-" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
-" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
-" - the docs and man pages coming with the %s package\n"
-"\n"
-"Please read AT LEAST the ipsec-howto docs\n"
-"before going any further."
-msgstr ""
-
-#: standalone/drakvpn:196
-#, fuzzy, c-format
-msgid "Kernel module."
-msgstr "Forprenu modulon"
-
-#: standalone/drakvpn:197
-#, c-format
-msgid ""
-"The kernel needs to have ipsec support.\n"
-"\n"
-"You're running a %s kernel version.\n"
-"\n"
-"This kernel has '%s' support."
-msgstr ""
-
-#: standalone/drakvpn:292
-#, fuzzy, c-format
-msgid "Security Policies"
-msgstr "Elektas sekurnivelon"
-
-#: standalone/drakvpn:292
-#, c-format
-msgid "IKE daemon racoon"
-msgstr ""
-
-#: standalone/drakvpn:295 standalone/drakvpn:306
-#, fuzzy, c-format
-msgid "Configuration file"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakvpn:296
-#, c-format
-msgid ""
-"Configuration step!\n"
-"\n"
-"You need to define the Security Policies and then to \n"
-"configure the automatic key exchange (IKE) daemon. \n"
-"The KAME IKE daemon we're using is called 'racoon'.\n"
-"\n"
-"What would you like to configure?\n"
-msgstr ""
-
-#: standalone/drakvpn:307
-#, c-format
-msgid ""
-"Next, we will configure the %s file.\n"
-"\n"
-"\n"
-"Simply click on Next.\n"
-msgstr ""
-
-#: standalone/drakvpn:325 standalone/drakvpn:685
-#, fuzzy, c-format
-msgid "%s entries"
-msgstr ", %s sektoroj"
-
-#: standalone/drakvpn:326
-#, c-format
-msgid ""
-"The %s file contents\n"
-"is divided into sections.\n"
-"\n"
-"You can now:\n"
-"\n"
-"  - display, add, edit, or remove sections, then\n"
-"  - commit the changes\n"
-"\n"
-"What would you like to do?\n"
-msgstr ""
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, fuzzy, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display"
-msgstr "Reludu"
-
-#: standalone/drakvpn:333 standalone/drakvpn:694
-#, fuzzy, c-format
-msgid "Commit"
-msgstr "kompakta"
-
-#: standalone/drakvpn:347 standalone/drakvpn:351 standalone/drakvpn:709
-#: standalone/drakvpn:713
-#, fuzzy, c-format
-msgid ""
-"_:display here is a verb\n"
-"Display configuration"
-msgstr "LAN Konfiguraĵo"
-
-#: standalone/drakvpn:352
-#, c-format
-msgid ""
-"The %s file does not exist.\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose 'add'.\n"
-msgstr ""
-
-#: standalone/drakvpn:368
-#, c-format
-msgid "ipsec.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:369
-#, c-format
-msgid ""
-"The %s file contains different sections.\n"
-"\n"
-"Here is its skeleton:\t'config setup' \n"
-"\t\t\t\t\t'conn default' \n"
-"\t\t\t\t\t'normal1'\n"
-"\t\t\t\t\t'normal2' \n"
-"\n"
-"You can now add one of these sections.\n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "config setup"
-msgstr "rekonfiguru"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "conn %default"
-msgstr "defaŭlta"
-
-#: standalone/drakvpn:376
-#, fuzzy, c-format
-msgid "normal conn"
-msgstr "Normala Modalo"
-
-#: standalone/drakvpn:382 standalone/drakvpn:423 standalone/drakvpn:510
-#, fuzzy, c-format
-msgid "Exists!"
-msgstr "Eliro"
-
-#: standalone/drakvpn:383 standalone/drakvpn:424
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change its name.\n"
-msgstr ""
-
-#: standalone/drakvpn:400
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow this config\n"
-"setup section.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:405
-#, fuzzy, c-format
-msgid "interfaces"
-msgstr "Interfaco"
-
-#: standalone/drakvpn:406
-#, c-format
-msgid "klipsdebug"
-msgstr ""
-
-#: standalone/drakvpn:407
-#, c-format
-msgid "plutodebug"
-msgstr ""
-
-#: standalone/drakvpn:408
-#, c-format
-msgid "plutoload"
-msgstr ""
-
-#: standalone/drakvpn:409
-#, c-format
-msgid "plutostart"
-msgstr ""
-
-#: standalone/drakvpn:410
-#, c-format
-msgid "uniqueids"
-msgstr ""
-
-#: standalone/drakvpn:444
-#, c-format
-msgid ""
-"This is the first section after the config\n"
-"setup one.\n"
-"\n"
-"Here you define the default settings. \n"
-"All the other sections will follow this one.\n"
-"The left settings are optional. If do not define\n"
-"them here, globally, you can define them in each\n"
-"section.\n"
-msgstr ""
-
-#: standalone/drakvpn:451
-#, fuzzy, c-format
-msgid "PFS"
-msgstr "HFS"
-
-#: standalone/drakvpn:452
-#, c-format
-msgid "keyingtries"
-msgstr ""
-
-#: standalone/drakvpn:453
-#, c-format
-msgid "compress"
-msgstr ""
-
-#: standalone/drakvpn:454
-#, c-format
-msgid "disablearrivalcheck"
-msgstr ""
-
-#: standalone/drakvpn:455 standalone/drakvpn:494
-#, fuzzy, c-format
-msgid "left"
-msgstr "Forigu"
-
-#: standalone/drakvpn:456 standalone/drakvpn:495
-#, c-format
-msgid "leftcert"
-msgstr ""
-
-#: standalone/drakvpn:457 standalone/drakvpn:496
-#, c-format
-msgid "leftrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:458 standalone/drakvpn:497
-#, c-format
-msgid "leftsubnet"
-msgstr ""
-
-#: standalone/drakvpn:459 standalone/drakvpn:498
-#, c-format
-msgid "leftnexthop"
-msgstr ""
-
-#: standalone/drakvpn:488
-#, c-format
-msgid ""
-"Your %s file has several sections, or connections.\n"
-"\n"
-"You can now add a new section.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:491
-#, fuzzy, c-format
-msgid "section name"
-msgstr "Nomo de konekto"
-
-#: standalone/drakvpn:492
-#, c-format
-msgid "authby"
-msgstr ""
-
-#: standalone/drakvpn:493
-#, fuzzy, c-format
-msgid "auto"
-msgstr "Ĉesigu"
-
-#: standalone/drakvpn:499
-#, fuzzy, c-format
-msgid "right"
-msgstr "Alta"
-
-#: standalone/drakvpn:500
-#, fuzzy, c-format
-msgid "rightcert"
-msgstr "Alta"
-
-#: standalone/drakvpn:501
-#, c-format
-msgid "rightrsasigkey"
-msgstr ""
-
-#: standalone/drakvpn:502
-#, c-format
-msgid "rightsubnet"
-msgstr ""
-
-#: standalone/drakvpn:503
-#, c-format
-msgid "rightnexthop"
-msgstr ""
-
-#: standalone/drakvpn:511
-#, c-format
-msgid ""
-"A section with this name already exists.\n"
-"The section names have to be unique.\n"
-"\n"
-"You'll have to go back and add another section\n"
-"or change the name of the section.\n"
-msgstr ""
-
-#: standalone/drakvpn:543
-#, c-format
-msgid ""
-"Add a Security Policy.\n"
-"\n"
-"You can now add a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:576 standalone/drakvpn:826
-#, fuzzy, c-format
-msgid "Edit section"
-msgstr "Elektado de individuaj pakaĵoj"
-
-#: standalone/drakvpn:577
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to edit \n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:580 standalone/drakvpn:660 standalone/drakvpn:831
-#: standalone/drakvpn:877
-#, fuzzy, c-format
-msgid "Section names"
-msgstr "Nomo de konekto"
-
-#: standalone/drakvpn:590
-#, fuzzy, c-format
-msgid "Can not edit!"
-msgstr "Ne povis malfermi %s por skribi: %s\n"
-
-#: standalone/drakvpn:591
-#, c-format
-msgid ""
-"You cannot edit this section.\n"
-"\n"
-"This section is mandatory for Freeswan 2.X.\n"
-"One has to specify version 2.0 on the top\n"
-"of the %s file, and eventually, disable or\n"
-"enable the opportunistic encryption.\n"
-msgstr ""
-
-#: standalone/drakvpn:600
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the config setup section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:611
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the default section entries.\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:624
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can now edit the normal section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:645
-#, c-format
-msgid ""
-"Edit a Security Policy.\n"
-"\n"
-"You can now edit a Security Policy.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:656 standalone/drakvpn:873
-#, fuzzy, c-format
-msgid "Remove section"
-msgstr "Malproksima printilo"
-
-#: standalone/drakvpn:657 standalone/drakvpn:874
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here below the one you want to remove\n"
-"and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:686
-#, c-format
-msgid ""
-"The racoon.conf file configuration.\n"
-"\n"
-"The contents of this file is divided into sections.\n"
-"You can now:\n"
-"  - display \t\t (display the file contents)\n"
-"  - add\t\t\t (add one section)\n"
-"  - edit \t\t\t (modify parameters of an existing section)\n"
-"  - remove \t\t (remove an existing section)\n"
-"  - commit \t\t (writes the changes to the real file)"
-msgstr ""
-
-#: standalone/drakvpn:714
-#, c-format
-msgid ""
-"The %s file does not exist\n"
-"\n"
-"This must be a new configuration.\n"
-"\n"
-"You'll have to go back and choose configure.\n"
-msgstr ""
-
-#: standalone/drakvpn:728
-#, c-format
-msgid "racoonf.conf entries"
-msgstr ""
-
-#: standalone/drakvpn:729
-#, c-format
-msgid ""
-"The 'add' sections step.\n"
-"\n"
-"Here below is the racoon.conf file skeleton:\n"
-"\t'path'\n"
-"\t'remote'\n"
-"\t'sainfo' \n"
-"\n"
-"Choose the section you would like to add.\n"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "path"
-msgstr ""
-
-#: standalone/drakvpn:735
-#, c-format
-msgid "remote"
-msgstr "fora"
-
-#: standalone/drakvpn:735
-#, fuzzy, c-format
-msgid "sainfo"
-msgstr "Informo"
-
-#: standalone/drakvpn:743
-#, c-format
-msgid ""
-"The 'add path' section step.\n"
-"\n"
-"The path sections have to be on top of your racoon.conf file.\n"
-"\n"
-"Put your mouse over the certificate entry to obtain online help."
-msgstr ""
-
-#: standalone/drakvpn:746
-#, fuzzy, c-format
-msgid "path type"
-msgstr "Ŝanĝu specon"
-
-#: standalone/drakvpn:750
-#, c-format
-msgid ""
-"path include path: specifies a path to include\n"
-"a file. See File Inclusion.\n"
-"\tExample: path include '/etc/racoon'\n"
-"\n"
-"path pre_shared_key file: specifies a file containing\n"
-"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
-"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
-"\n"
-"path certificate path: racoon(8) will search this directory\n"
-"if a certificate or certificate request is received.\n"
-"\tExample: path certificate '/etc/cert' ;\n"
-"\n"
-"File Inclusion: include file \n"
-"other configuration files can be included.\n"
-"\tExample: include \"remote.conf\" ;\n"
-"\n"
-"Pre-shared key File: Pre-shared key file defines a pair\n"
-"of the identifier and the shared secret key which are used at\n"
-"Pre-shared key authentication method in phase 1."
-msgstr ""
-
-#: standalone/drakvpn:770 standalone/drakvpn:863
-#, fuzzy, c-format
-msgid "real file"
-msgstr "Elektu dosieron"
-
-#: standalone/drakvpn:793
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your racoon.conf file.\n"
-"\n"
-"You can now choose the remote settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:810
-#, c-format
-msgid ""
-"Make sure you already have the path sections\n"
-"on the top of your %s file.\n"
-"\n"
-"You can now choose the sainfo settings.\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:827
-#, c-format
-msgid ""
-"Your %s file has several sections or connections.\n"
-"\n"
-"You can choose here in the list below the one you want\n"
-"to edit and then click on next.\n"
-msgstr ""
-
-#: standalone/drakvpn:838
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"\n"
-"You can now edit the remote section entries.\n"
-"\n"
-"Choose continue when you are done to write the data.\n"
-msgstr ""
-
-#: standalone/drakvpn:847
-#, c-format
-msgid ""
-"Your %s file has several sections.\n"
-"\n"
-"You can now edit the sainfo section entries.\n"
-"\n"
-"Choose continue when you are done to write the data."
-msgstr ""
-
-#: standalone/drakvpn:855
-#, c-format
-msgid ""
-"This section has to be on top of your\n"
-"%s file.\n"
-"\n"
-"Make sure all other sections follow these path\n"
-"sections.\n"
-"\n"
-"You can now edit the path entries.\n"
-"\n"
-"Choose continue or previous when you are done.\n"
-msgstr ""
-
-#: standalone/drakvpn:862
-#, c-format
-msgid "path_type"
-msgstr ""
-
-#: standalone/drakvpn:903
-#, c-format
-msgid ""
-"Everything has been configured.\n"
-"\n"
-"You may now share resources through the Internet,\n"
-"in a secure way, using a VPN connection.\n"
-"\n"
-"You should make sure that that the tunnels shorewall\n"
-"section is configured."
-msgstr ""
-
-#: standalone/drakvpn:923
-#, c-format
-msgid "Sainfo source address"
-msgstr ""
-
-#: standalone/drakvpn:924
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.209 is the source address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.1.0/24 is the source address"
-msgstr ""
-
-#: standalone/drakvpn:941
-#, fuzzy, c-format
-msgid "Sainfo source protocol"
-msgstr "Eŭropa protokolo"
-
-#: standalone/drakvpn:942
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe first 'any' allows any protocol for the source"
-msgstr ""
-
-#: standalone/drakvpn:956
-#, c-format
-msgid "Sainfo destination address"
-msgstr ""
-
-#: standalone/drakvpn:957
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\t203.178.141.218 is the destination address\n"
-"\n"
-"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
-"\t172.16.2.0/24 is the destination address"
-msgstr ""
-
-#: standalone/drakvpn:974
-#, c-format
-msgid "Sainfo destination protocol"
-msgstr ""
-
-#: standalone/drakvpn:975
-#, c-format
-msgid ""
-"sainfo (source_id destination_id | anonymous) { statements }\n"
-"defines the parameters of the IKE phase 2\n"
-"(IPsec-SA establishment).\n"
-"\n"
-"source_id and destination_id are constructed like:\n"
-"\n"
-"\taddress address [/ prefix] [[port]] ul_proto\n"
-"\n"
-"Examples: \n"
-"\n"
-"sainfo anonymous (accepts connections from anywhere)\n"
-"\tleave blank this entry if you want anonymous\n"
-"\n"
-"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
-"\tthe last 'any' allows any protocol for the destination"
-msgstr ""
-
-#: standalone/drakvpn:989
-#, c-format
-msgid "PFS group"
-msgstr ""
-
-#: standalone/drakvpn:991
-#, c-format
-msgid ""
-"define the group of Diffie-Hellman exponentiations.\n"
-"If you do not require PFS then you can omit this directive.\n"
-"Any proposal will be accepted if you do not specify one.\n"
-"group is one of the following: modp768, modp1024, modp1536.\n"
-"Or you can define 1, 2, or 5 as the DH group number."
-msgstr ""
-
-#: standalone/drakvpn:996
-#, fuzzy, c-format
-msgid "Lifetime number"
-msgstr "numero"
-
-#: standalone/drakvpn:997
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
-msgstr ""
-
-#: standalone/drakvpn:1013
-#, c-format
-msgid "Lifetime unit"
-msgstr ""
-
-#: standalone/drakvpn:1015
-#, c-format
-msgid ""
-"define a lifetime of a certain time which will be pro-\n"
-"posed in the phase 1 negotiations.  Any proposal will be\n"
-"accepted, and the attribute(s) will not be proposed to\n"
-"the peer if you do not specify it(them).  They can be\n"
-"individually specified in each proposal.\n"
-"\n"
-"Examples: \n"
-"\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 1 min;    # sec,min,hour\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 30 sec;\n"
-"        lifetime time 60 sec;\n"
-"\tlifetime time 12 hour;\n"
-"\n"
-"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
-"'hour'.\n"
-msgstr ""
-
-#: standalone/drakvpn:1033
-#, fuzzy, c-format
-msgid "Authentication algorithm"
-msgstr "Aŭtentikigado"
-
-#: standalone/drakvpn:1035
-#, c-format
-msgid "Compression algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1036
-#, fuzzy, c-format
-msgid "deflate"
-msgstr "defaŭlta"
-
-#: standalone/drakvpn:1043
-#, c-format
-msgid "Remote"
-msgstr "Fora"
-
-#: standalone/drakvpn:1044
-#, c-format
-msgid ""
-"remote (address | anonymous) [[port]] { statements }\n"
-"specifies the parameters for IKE phase 1 for each remote node.\n"
-"The default port is 500.  If anonymous is specified, the state-\n"
-"ments apply to all peers which do not match any other remote\n"
-"directive.\n"
-"\n"
-"Examples: \n"
-"\n"
-"remote anonymous\n"
-"remote ::1 [8000]"
-msgstr ""
-
-#: standalone/drakvpn:1052
-#, fuzzy, c-format
-msgid "Exchange mode"
-msgstr "Diskuma modalo"
-
-#: standalone/drakvpn:1054
-#, c-format
-msgid ""
-"defines the exchange mode for phase 1 when racoon is the\n"
-"initiator. Also it means the acceptable exchange mode\n"
-"when racoon is responder. More than one mode can be\n"
-"specified by separating them with a comma. All of the\n"
-"modes are acceptable. The first exchange mode is what\n"
-"racoon uses when it is the initiator.\n"
-msgstr ""
-
-#: standalone/drakvpn:1060
-#, fuzzy, c-format
-msgid "Generate policy"
-msgstr "Sekureco"
-
-#: standalone/drakvpn:1062
-#, c-format
-msgid ""
-"This directive is for the responder.  Therefore you\n"
-"should set passive on in order that racoon(8) only\n"
-"becomes a responder.  If the responder does not have any\n"
-"policy in SPD during phase 2 negotiation, and the direc-\n"
-"tive is set on, then racoon(8) will choice the first pro-\n"
-"posal in the SA payload from the initiator, and generate\n"
-"policy entries from the proposal.  It is useful to nego-\n"
-"tiate with the client which is allocated IP address\n"
-"dynamically.  Note that inappropriate policy might be\n"
-"installed into the responder's SPD by the initiator.  So\n"
-"that other communication might fail if such policies\n"
-"installed due to some policy mismatches between the ini-\n"
-"tiator and the responder.  This directive is ignored in\n"
-"the initiator case.  The default value is off."
-msgstr ""
-
-#: standalone/drakvpn:1076
-#, fuzzy, c-format
-msgid "Passive"
-msgstr "Palestino"
-
-#: standalone/drakvpn:1078
-#, c-format
-msgid ""
-"If you do not want to initiate the negotiation, set this\n"
-"to on.  The default value is off.  It is useful for a\n"
-"server."
-msgstr ""
-
-#: standalone/drakvpn:1081
-#, c-format
-msgid "Certificate type"
-msgstr ""
-
-#: standalone/drakvpn:1083
-#, fuzzy, c-format
-msgid "My certfile"
-msgstr "Elektu dosieron"
-
-#: standalone/drakvpn:1084
-#, fuzzy, c-format
-msgid "Name of the certificate"
-msgstr "Nomo de printilo"
-
-#: standalone/drakvpn:1085
-#, c-format
-msgid "My private key"
-msgstr ""
-
-#: standalone/drakvpn:1086
-#, fuzzy, c-format
-msgid "Name of the private key"
-msgstr "Nomo de printilo"
-
-#: standalone/drakvpn:1087
-#, fuzzy, c-format
-msgid "Peers certfile"
-msgstr "Elektu dosieron"
-
-#: standalone/drakvpn:1088
-#, c-format
-msgid "Name of the peers certificate"
-msgstr ""
-
-#: standalone/drakvpn:1089
-#, fuzzy, c-format
-msgid "Verify cert"
-msgstr "tre agrabla(j)"
-
-#: standalone/drakvpn:1091
-#, c-format
-msgid ""
-"If you do not want to verify the peer's certificate for\n"
-"some reason, set this to off.  The default is on."
-msgstr ""
-
-#: standalone/drakvpn:1093
-#, c-format
-msgid "My identifier"
-msgstr ""
-
-#: standalone/drakvpn:1094
-#, c-format
-msgid ""
-"specifies the identifier sent to the remote host and the\n"
-"type to use in the phase 1 negotiation.  address, FQDN,\n"
-"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
-"they are used like:\n"
-"\tmy_identifier address [address];\n"
-"\t\tthe type is the IP address.  This is the default\n"
-"\t\ttype if you do not specify an identifier to use.\n"
-"\tmy_identifier user_fqdn string;\n"
-"\t\tthe type is a USER_FQDN (user fully-qualified\n"
-"\t\tdomain name).\n"
-"\tmy_identifier FQDN string;\n"
-"\t\tthe type is a FQDN (fully-qualified domain name).\n"
-"\tmy_identifier keyid file;\n"
-"\t\tthe type is a KEY_ID.\n"
-"\tmy_identifier asn1dn [string];\n"
-"\t\tthe type is an ASN.1 distinguished name.  If\n"
-"\t\tstring is omitted, racoon(8) will get DN from\n"
-"\t\tSubject field in the certificate.\n"
-"\n"
-"Examples: \n"
-"\n"
-"my_identifier user_fqdn \"myemail@mydomain.com\""
-msgstr ""
-
-#: standalone/drakvpn:1114
-#, fuzzy, c-format
-msgid "Peers identifier"
-msgstr "Printilo"
-
-#: standalone/drakvpn:1115
-#, fuzzy, c-format
-msgid "Proposal"
-msgstr "Protokolo"
-
-#: standalone/drakvpn:1117
-#, c-format
-msgid ""
-"specify the encryption algorithm used for the\n"
-"phase 1 negotiation. This directive must be defined. \n"
-"algorithm is one of the following: \n"
-"\n"
-"DES, 3DES, blowfish, cast128 for oakley.\n"
-"\n"
-"For other transforms, this statement should not be used."
-msgstr ""
-
-#: standalone/drakvpn:1124
-#, c-format
-msgid "Hash algorithm"
-msgstr ""
-
-#: standalone/drakvpn:1126
-#, fuzzy, c-format
-msgid "DH group"
-msgstr "Laborgrupo"
-
-#: standalone/drakvpn:1133
-#, c-format
-msgid "Command"
-msgstr "Komando"
-
-#: standalone/drakvpn:1134
-#, c-format
-msgid "Source IP range"
-msgstr ""
-
-#: standalone/drakvpn:1135
-#, c-format
-msgid "Destination IP range"
-msgstr ""
-
-#: standalone/drakvpn:1136
-#, fuzzy, c-format
-msgid "Upper-layer protocol"
-msgstr "Eŭropa protokolo"
-
-#: standalone/drakvpn:1136 standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "any"
-msgstr "Majo"
-
-#: standalone/drakvpn:1138
-#, c-format
-msgid "Flag"
-msgstr "Flago"
-
-#: standalone/drakvpn:1139
-#, c-format
-msgid "Direction"
-msgstr "Direkto"
-
-#: standalone/drakvpn:1140
-#, c-format
-msgid "IPsec policy"
-msgstr ""
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "ipsec"
-msgstr "Muso"
-
-#: standalone/drakvpn:1140
-#, fuzzy, c-format
-msgid "discard"
-msgstr "malebligita"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "tunnel"
-msgstr "Nuligu"
-
-#: standalone/drakvpn:1143
-#, fuzzy, c-format
-msgid "transport"
-msgstr "Aliaj pordoj"
-
-#: standalone/drakvpn:1145
-#, fuzzy, c-format
-msgid "Source/destination"
-msgstr "Laborstacio"
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "require"
-msgstr ""
-
-#: standalone/drakvpn:1146
-#, c-format
-msgid "default"
-msgstr "defaŭlta"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "use"
-msgstr "Muso"
-
-#: standalone/drakvpn:1146
-#, fuzzy, c-format
-msgid "unique"
-msgstr "Martiniko"
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: standalone/drakxtv:45
-#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Kanada (Kebeka)"
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "Japan (cable)"
-msgstr ""
-
-#: standalone/drakxtv:46
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
-
-#: standalone/drakxtv:47
-#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Eŭropo"
-
-#: standalone/drakxtv:47
-#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Eŭropo"
-
-#: standalone/drakxtv:47
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Franca"
-
-#: standalone/drakxtv:48
-#, c-format
-msgid "Newzealand"
-msgstr ""
-
-#: standalone/drakxtv:51
-#, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
-
-#: standalone/drakxtv:85
-#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-
-#: standalone/drakxtv:87
-#, c-format
-msgid "TV norm:"
-msgstr ""
-
-#: standalone/drakxtv:88
-#, c-format
-msgid "Area:"
-msgstr ""
-
-#: standalone/drakxtv:93
-#, c-format
-msgid "Scanning for TV channels in progress..."
-msgstr ""
-
-#: standalone/drakxtv:103
-#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: standalone/drakxtv:107
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Estis eraro dum instalado de pakaĵoj:"
-
-#: standalone/drakxtv:110
-#, c-format
-msgid "Have a nice day!"
-msgstr ""
-
-#: standalone/drakxtv:111
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
-
-#: standalone/drakxtv:149
-#, c-format
-msgid "No TV Card detected!"
-msgstr ""
-
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: standalone/drakxtv:151
-#, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.mandrivalinux.com/en/hardware.php3"
-msgstr ""
-
-#: standalone/harddrake2:24
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Printas provpaĝo(j)n..."
-
-#: standalone/harddrake2:25
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
-
-#: standalone/harddrake2:28
-#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-
-#: standalone/harddrake2:30 standalone/harddrake2:145
-#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Aŭtentikigado"
-
-#: standalone/harddrake2:31
-#, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
-
-#: standalone/harddrake2:34
-#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "Drive capacity"
-msgstr ""
-
-#: standalone/harddrake2:37
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
-
-#: standalone/harddrake2:38
-#, c-format
-msgid "this field describes the device"
-msgstr ""
-
-#: standalone/harddrake2:39
-#, fuzzy, c-format
-msgid "Old device file"
-msgstr "Elektu dosieron"
-
-#: standalone/harddrake2:40
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
-
-#: standalone/harddrake2:41
-#, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Prokura kluzaparato"
-
-#: standalone/harddrake2:42
-#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
-
-#. -PO: here "module" is the "jargon term" for a kernel driver
-#: standalone/harddrake2:45
-#, c-format
-msgid "Module"
-msgstr "Modulo"
-
-#: standalone/harddrake2:45
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "Extended partitions"
-msgstr "Kreu novan subdiskon"
-
-#: standalone/harddrake2:46
-#, fuzzy, c-format
-msgid "the number of extended partitions"
-msgstr "Movu dosierojn al la nova subdisko"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Geometry"
-msgstr "Geometrio"
-
-#: standalone/harddrake2:47
-#, c-format
-msgid "Cylinder/head/sectors geometry of the disk"
-msgstr ""
-
-#: standalone/harddrake2:48
-#, fuzzy, c-format
-msgid "Disk controller"
-msgstr "SMBus-kontroliloj"
-
-#: standalone/harddrake2:48
-#, c-format
-msgid "the disk controller on the host side"
-msgstr ""
-
-#: standalone/harddrake2:49
-#, c-format
-msgid "class of hardware device"
-msgstr ""
-
-#: standalone/harddrake2:50 standalone/harddrake2:82
-#: standalone/printerdrake:211
-#, c-format
-msgid "Model"
-msgstr "Modelo"
-
-#: standalone/harddrake2:50
-#, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Memoro de Karto (DMA)"
-
-#: standalone/harddrake2:51
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Reta Printilo (TCP/ingo)"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "Primary partitions"
-msgstr "Formatu subdiskojn"
-
-#: standalone/harddrake2:52
-#, fuzzy, c-format
-msgid "the number of the primary partitions"
-msgstr "Unua sektoro de radika subdisko"
-
-#: standalone/harddrake2:53
-#, c-format
-msgid "the vendor name of the device"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, c-format
-msgid "Bus PCI #"
-msgstr ""
-
-#: standalone/harddrake2:54
-#, fuzzy, c-format
-msgid "the PCI bus on which the device is plugged"
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device #"
-msgstr "Servoj"
-
-#: standalone/harddrake2:55
-#, fuzzy, c-format
-msgid "PCI device number"
-msgstr "numero"
-
-#: standalone/harddrake2:56
-#, c-format
-msgid "PCI function #"
-msgstr ""
-
-#: standalone/harddrake2:56
-#, fuzzy, c-format
-msgid "PCI function number"
-msgstr "Nomo de konekto"
-
-#: standalone/harddrake2:57
-#, fuzzy, c-format
-msgid "Vendor ID"
-msgstr "Vendinto"
-
-#: standalone/harddrake2:57
-#, c-format
-msgid "this is the standard numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:58
-#, fuzzy, c-format
-msgid "Device ID"
-msgstr "Aparato: "
-
-#: standalone/harddrake2:58
-#, c-format
-msgid "this is the numerical identifier of the device"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "Sub vendor ID"
-msgstr ""
-
-#: standalone/harddrake2:59
-#, c-format
-msgid "this is the minor numerical identifier of the vendor"
-msgstr ""
-
-#: standalone/harddrake2:60
-#, fuzzy, c-format
-msgid "Sub device ID"
-msgstr "Servoj"
-
-#: standalone/harddrake2:60
-#, c-format
-msgid "this is the minor numerical identifier of the device"
-msgstr ""
-
-#: standalone/harddrake2:61
-#, fuzzy, c-format
-msgid "Device USB ID"
-msgstr "Aparato: "
-
-#: standalone/harddrake2:61
-#, c-format
-msgid ".."
-msgstr ".."
-
-#: standalone/harddrake2:65
-#, c-format
-msgid "Bogomips"
-msgstr ""
-
-#: standalone/harddrake2:65
-#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
-
-#: standalone/harddrake2:66
-#, fuzzy, c-format
-msgid "Cache size"
-msgstr "grandeco de pecoj"
-
-#: standalone/harddrake2:66
-#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr ""
-
-#. -PO: here "comas" is the medical coma, not the lexical coma!!
-#: standalone/harddrake2:69
-#, c-format
-msgid "Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:69
-#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "Cpuid family"
-msgstr ""
-
-#: standalone/harddrake2:70
-#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
-msgstr ""
-
-#: standalone/harddrake2:71
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Elektas sekurnivelon"
-
-#: standalone/harddrake2:71
-#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
-
-#: standalone/harddrake2:72
-#, c-format
-msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "Flags"
-msgstr ""
-
-#: standalone/harddrake2:73
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
-
-#: standalone/harddrake2:74
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
-
-#: standalone/harddrake2:75
-#, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "Is FPU present"
-msgstr ""
-
-#: standalone/harddrake2:76
-#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
-
-#: standalone/harddrake2:77
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "F00f bug"
-msgstr ""
-
-#: standalone/harddrake2:78
-#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
-
-#: standalone/harddrake2:79
-#, c-format
-msgid "Halt bug"
-msgstr ""
-
-#: standalone/harddrake2:80
-#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
-msgstr ""
-
-#: standalone/harddrake2:81
-#, c-format
-msgid "sub generation of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:82
-#, c-format
-msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
-msgstr ""
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "Model name"
-msgstr "Modulonomo"
-
-#: standalone/harddrake2:83
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr ""
-
-#: standalone/harddrake2:84
-#, c-format
-msgid "the name of the CPU"
-msgstr ""
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "Processor ID"
-msgstr ""
-
-#: standalone/harddrake2:85
-#, c-format
-msgid "the number of the processor"
-msgstr ""
-
-#: standalone/harddrake2:86
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Formatas"
-
-#: standalone/harddrake2:86
-#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
-msgstr ""
-
-#: standalone/harddrake2:87
-#, c-format
-msgid "the vendor name of the processor"
-msgstr ""
-
-#: standalone/harddrake2:88
-#, fuzzy, c-format
-msgid "Write protection"
-msgstr "Malproksima printilo"
-
-#: standalone/harddrake2:88
-#, c-format
-msgid ""
-"the WP flag in the CR0 register of the cpu enforce write protection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
-msgstr ""
-
-#: standalone/harddrake2:92
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatu"
-
-#: standalone/harddrake2:92
-#, c-format
-msgid "format of floppies supported by the drive"
-msgstr ""
-
-#: standalone/harddrake2:96
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
-
-#: standalone/harddrake2:97
-#, fuzzy, c-format
-msgid "Disk identifier"
-msgstr "Printilo"
-
-#: standalone/harddrake2:97
-#, c-format
-msgid "usually the disk serial number"
-msgstr ""
-
-#: standalone/harddrake2:98
-#, fuzzy, c-format
-msgid "Logical unit number"
-msgstr "Lokaj dosieroj"
-
-#: standalone/harddrake2:98
-#, c-format
-msgid ""
-"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
-"identified by a\n"
-"channel number, a target id and a logical unit number"
-msgstr ""
-
-#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
-#: standalone/harddrake2:105
-#, fuzzy, c-format
-msgid "Installed size"
-msgstr "Instalu sistemon"
-
-#: standalone/harddrake2:105
-#, c-format
-msgid "Installed size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:106
-#, fuzzy, c-format
-msgid "Enabled Size"
-msgstr "ebligu"
-
-#: standalone/harddrake2:106
-#, c-format
-msgid "Enabled size of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:107
-#, fuzzy, c-format
-msgid "type of the memory device"
-msgstr "Nomo de printilo"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed"
-msgstr "Rapideco"
-
-#: standalone/harddrake2:108
-#, c-format
-msgid "Speed of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:109
-#, fuzzy, c-format
-msgid "Bank connections"
-msgstr "Kabla konekto"
-
-#: standalone/harddrake2:110
-#, c-format
-msgid "Socket designation of the memory bank"
-msgstr ""
-
-#: standalone/harddrake2:114
-#, fuzzy, c-format
-msgid "Device file"
-msgstr "Elektu dosieron"
-
-#: standalone/harddrake2:114
-#, c-format
-msgid ""
-"the device file used to communicate with the kernel driver for the mouse"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, c-format
-msgid "Emulated wheel"
-msgstr ""
-
-#: standalone/harddrake2:115
-#, fuzzy, c-format
-msgid "whether the wheel is emulated or not"
-msgstr "Loĝiteka MouseMan"
-
-#: standalone/harddrake2:116
-#, fuzzy, c-format
-msgid "the type of the mouse"
-msgstr "Bonvole, provu la muson"
-
-#: standalone/harddrake2:117
-#, fuzzy, c-format
-msgid "the name of the mouse"
-msgstr "2 butonoj"
-
-#: standalone/harddrake2:118
-#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 butonoj"
-
-#: standalone/harddrake2:118
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 butonoj"
-
-#: standalone/harddrake2:119
-#, fuzzy, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "Bonvole, elektu al kiu seria pordo estas via muso konektata."
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "Mouse protocol used by X11"
-msgstr ""
-
-#: standalone/harddrake2:120
-#, c-format
-msgid "the protocol that the graphical desktop use with the mouse"
-msgstr ""
-
-#: standalone/harddrake2:127 standalone/harddrake2:136
-#: standalone/harddrake2:143 standalone/harddrake2:151
-#: standalone/harddrake2:317
-#, fuzzy, c-format
-msgid "Identification"
-msgstr "Aŭtentikigado"
-
-#: standalone/harddrake2:128 standalone/harddrake2:144
-#, c-format
-msgid "Connection"
-msgstr "Konektu"
-
-#: standalone/harddrake2:137
-#, fuzzy, c-format
-msgid "Performances"
-msgstr "Prefero: "
-
-#: standalone/harddrake2:138
-#, fuzzy, c-format
-msgid "Bugs"
-msgstr "Aŭgusto"
-
-#: standalone/harddrake2:139
-#, c-format
-msgid "FPU"
-msgstr ""
-
-#: standalone/harddrake2:147
-#, c-format
-msgid "Partitions"
-msgstr "Subdiskoj"
-
-#: standalone/harddrake2:152
-#, c-format
-msgid "Features"
-msgstr "Funkcioj"
-
-#. -PO: please keep all "/" characters !!!
-#: standalone/harddrake2:175 standalone/logdrake:77
-#: standalone/printerdrake:134 standalone/printerdrake:147
-#, c-format
-msgid "/_Options"
-msgstr "/_Opcioj"
-
-#: standalone/harddrake2:176 standalone/harddrake2:202 standalone/logdrake:79
-#: standalone/printerdrake:159 standalone/printerdrake:161
-#: standalone/printerdrake:164 standalone/printerdrake:166
-#, c-format
-msgid "/_Help"
-msgstr "/_Helpo"
-
-#: standalone/harddrake2:180
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Malproksima printilo"
-
-#: standalone/harddrake2:181
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Malproksima printilo"
-
-#: standalone/harddrake2:182
-#, fuzzy, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "Malproksima printilo"
-
-#: standalone/harddrake2:183
-#, c-format
-msgid "/Autodetect parallel _zip drives"
-msgstr ""
-
-#: standalone/harddrake2:190
-#, c-format
-msgid "/_Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:191 standalone/printerdrake:140
-#, c-format
-msgid "/_Quit"
-msgstr "/_Ĉesu"
-
-#: standalone/harddrake2:204
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Priskribo"
-
-#: standalone/harddrake2:206
-#, c-format
-msgid "Harddrake help"
-msgstr ""
-
-#: standalone/harddrake2:215
-#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
-
-#: standalone/harddrake2:221 standalone/printerdrake:164
-#, c-format
-msgid "/_Report Bug"
-msgstr "/_Raportu Cimo"
-
-#: standalone/harddrake2:223 standalone/printerdrake:166
-#, c-format
-msgid "/_About..."
-msgstr "/_Pri..."
-
-#: standalone/harddrake2:224
-#, c-format
-msgid "About Harddrake"
-msgstr ""
-
-#. -PO: Do not alter the <span ..> and </span> tags
-#: standalone/harddrake2:226
-#, c-format
-msgid ""
-"This is HardDrake, a %s hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandriva.com&gt;\n"
-"\n"
-msgstr ""
-
-#: standalone/harddrake2:240
-#, fuzzy, c-format
-msgid "Harddrake2"
-msgstr "HardDrake"
-
-#: standalone/harddrake2:254
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Vidu hardvaran informon"
-
-#: standalone/harddrake2:259
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Konfiguru muson"
-
-#: standalone/harddrake2:266
-#, c-format
-msgid "Run config tool"
-msgstr ""
-
-#: standalone/harddrake2:304 standalone/net_monitor:108
-#: standalone/net_monitor:109 standalone/net_monitor:114
-#, c-format
-msgid "unknown"
-msgstr "nekonata"
-
-#: standalone/harddrake2:305 standalone/printerdrake:298
-#: standalone/printerdrake:336
-#, c-format
-msgid "Unknown"
-msgstr "Nekonata"
-
-#: standalone/harddrake2:325
-#, c-format
-msgid "Misc"
-msgstr "Diverse"
-
-#: standalone/harddrake2:340
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr ""
-
-#: standalone/harddrake2:392
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d sekundoj"
-
-#: standalone/harddrake2:392
-#, c-format
-msgid "primary"
-msgstr ""
-
-#: standalone/harddrake2:396
-#, fuzzy, c-format
-msgid "burner"
-msgstr "Printilo"
-
-#: standalone/harddrake2:396
-#, c-format
-msgid "DVD"
-msgstr "DVD"
-
-#: standalone/harddrake2:542 standalone/harddrake2:545
-#, c-format
-msgid "Upload the hardware list"
-msgstr ""
-
-#: standalone/harddrake2:547
-#, c-format
-msgid "Account:"
-msgstr "Konto:"
-
-#: standalone/harddrake2:548
-#, c-format
-msgid "Password:"
-msgstr "Pasvorto:"
-
-#: standalone/harddrake2:549
-#, c-format
-msgid "Hostname:"
-msgstr "Poŝtejo:"
-
-#: standalone/keyboarddrake:30
-#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Bonvole, elektu vian klavaran aranĝon."
-
-#: standalone/keyboarddrake:45
-#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
-
-#: standalone/localedrake:38
-#, c-format
-msgid "LocaleDrake"
-msgstr "LocaleDrake"
-
-#: standalone/localedrake:68
-#, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr ""
-
-#: standalone/logdrake:50
-#, fuzzy, c-format
-msgid "Mandriva Linux Tools Logs"
-msgstr "Konekti al la interreto"
-
-#: standalone/logdrake:51
-#, fuzzy, c-format
-msgid "Logdrake"
-msgstr "logdrake"
-
-#: standalone/logdrake:64
-#, fuzzy, c-format
-msgid "Show only for the selected day"
-msgstr "Montru nur por ĉi tiu tago"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "/File/_New"
-msgstr "/Dosiero/_Nova"
-
-#: standalone/logdrake:71
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "/File/_Open"
-msgstr "/Dosiero/_Malfermu"
-
-#: standalone/logdrake:72
-#, c-format
-msgid "<control>O"
-msgstr "<control>O"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "/File/_Save"
-msgstr "/Dosiero/_Savu"
-
-#: standalone/logdrake:73
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
-
-#: standalone/logdrake:74
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Dosiero/Savu _Kiel"
-
-#: standalone/logdrake:75
-#, c-format
-msgid "/File/-"
-msgstr "/Dosiero/-"
-
-#: standalone/logdrake:78
-#, c-format
-msgid "/Options/Test"
-msgstr "/Opcioj/Provu"
-
-#: standalone/logdrake:80
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Helpo/_Pri..."
-
-#: standalone/logdrake:109
-#, c-format
-msgid ""
-"_:this is the auth.log log file\n"
-"Authentication"
-msgstr ""
-
-#: standalone/logdrake:110
-#, c-format
-msgid ""
-"_:this is the user.log log file\n"
-"User"
-msgstr ""
-
-#: standalone/logdrake:111
-#, c-format
-msgid ""
-"_:this is the /var/log/messages log file\n"
-"Messages"
-msgstr ""
-
-#: standalone/logdrake:112
-#, c-format
-msgid ""
-"_:this is the /var/log/syslog log file\n"
-"Syslog"
-msgstr ""
-
-#: standalone/logdrake:116
-#, c-format
-msgid "search"
-msgstr "serĉu"
-
-#: standalone/logdrake:128
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "Ilo por vidi vian logdosieron"
-
-#: standalone/logdrake:129 standalone/net_monitor:99
-#, c-format
-msgid "Settings"
-msgstr "Konfiguraĵoj"
-
-#: standalone/logdrake:134
-#, fuzzy, c-format
-msgid "Matching"
-msgstr "konformanta(j)"
-
-#: standalone/logdrake:135
-#, c-format
-msgid "but not matching"
-msgstr "sed ne konformanta(j)"
-
-#: standalone/logdrake:139
-#, c-format
-msgid "Choose file"
-msgstr "Elektu dosieron"
-
-#: standalone/logdrake:148
-#, c-format
-msgid "Calendar"
-msgstr "Kalendaro"
-
-#: standalone/logdrake:158
-#, c-format
-msgid "Content of the file"
-msgstr "Enhavoj de la dosiero"
-
-#: standalone/logdrake:162 standalone/logdrake:400
-#, c-format
-msgid "Mail alert"
-msgstr ""
-
-#: standalone/logdrake:169
-#, c-format
-msgid "The alert wizard has failed unexpectedly:"
-msgstr ""
-
-#: standalone/logdrake:222
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "bonvole atendu, mi vortanalizas la dosieron: %s"
-
-#: standalone/logdrake:377
-#, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
-
-#: standalone/logdrake:378
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Domajna nomo"
-
-#: standalone/logdrake:379
-#, c-format
-msgid "Ftp Server"
-msgstr "FTP Servilo"
-
-#: standalone/logdrake:380
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Datumbazoj"
-
-#: standalone/logdrake:381
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS Servilo"
-
-#: standalone/logdrake:383
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Servilo"
-
-#: standalone/logdrake:384
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Printservilo"
-
-#: standalone/logdrake:395
-#, fuzzy, c-format
-msgid "Configure the mail alert system"
-msgstr "Konfiguru retumon"
-
-#: standalone/logdrake:396
-#, c-format
-msgid "Stop the mail alert system"
-msgstr ""
-
-#: standalone/logdrake:403
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Konfiguraĵon"
-
-#: standalone/logdrake:404
-#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-
-#: standalone/logdrake:407
-#, fuzzy, c-format
-msgid "What do you want to do?"
-msgstr "Kie vi deziras kroĉi aparaton %s?"
-
-#: standalone/logdrake:414
-#, fuzzy, c-format
-msgid "Services settings"
-msgstr "Servilo"
-
-#: standalone/logdrake:415
-#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr ""
-
-#: standalone/logdrake:422
-#, fuzzy, c-format
-msgid "Load setting"
-msgstr "Formatas"
-
-#: standalone/logdrake:423
-#, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr ""
-
-#: standalone/logdrake:424
-#, c-format
-msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
-msgstr ""
-
-#: standalone/logdrake:429
-#, fuzzy, c-format
-msgid "Alert configuration"
-msgstr "Interreta Konfigurado"
-
-#: standalone/logdrake:430
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Bonvole provu denove"
-
-#: standalone/logdrake:431
-#, c-format
-msgid "and enter the name (or the IP) of the SMTP server you wish to use"
-msgstr ""
-
-#: standalone/logdrake:450
-#, c-format
-msgid "The wizard successfully configured the mail alert."
-msgstr ""
-
-#: standalone/logdrake:456
-#, c-format
-msgid "The wizard successfully disabled the mail alert."
-msgstr ""
-
-#: standalone/logdrake:515
-#, c-format
-msgid "Save as.."
-msgstr "Savu Kiel..."
-
-#: standalone/mousedrake:31
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "Bonvole, elektu la specon de via muso."
-
-#: standalone/mousedrake:44
-#, c-format
-msgid "Emulate third button?"
-msgstr "Ĉu vi deziras emuli trian musbutonon?"
-
-#: standalone/mousedrake:61
-#, fuzzy, c-format
-msgid "Mouse test"
-msgstr "Mouse Systems"
-
-#: standalone/mousedrake:64
-#, fuzzy, c-format
-msgid "Please test your mouse:"
-msgstr "Bonvole, provu la muson"
-
-#: standalone/net_applet:45
-#, fuzzy, c-format
-msgid "Network is up on interface %s"
-msgstr "Reta interfaco"
-
-#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
-#: standalone/net_applet:53
-#, fuzzy, c-format
-msgid "Network is down on interface %s. Click on \"Configure Network\""
-msgstr "Ekrano ne estas konfigurata"
-
-#: standalone/net_applet:68 standalone/net_monitor:474
-#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Konektu"
-
-#: standalone/net_applet:69 standalone/net_monitor:474
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Malkonektu"
-
-#: standalone/net_applet:70
-#, fuzzy, c-format
-msgid "Monitor Network"
-msgstr "Restaŭru de dosiero"
-
-#: standalone/net_applet:71
-#, c-format
-msgid "Configure Network"
-msgstr "Konfiguru la reton"
-
-#: standalone/net_applet:73
-#, fuzzy, c-format
-msgid "Watched interface"
-msgstr "Interfaco"
-
-#: standalone/net_applet:82
-#, c-format
-msgid "Profiles"
-msgstr "Profiloj"
-
-#: standalone/net_applet:91
-#, c-format
-msgid "Get Online Help"
-msgstr ""
-
-#: standalone/net_applet:223
-#, fuzzy, c-format
-msgid "Interactive intrusion detection"
-msgstr "Malproksima printilo"
-
-#: standalone/net_applet:227
-#, c-format
-msgid "Always launch on startup"
-msgstr "Ĉiam startu post sistemstartado"
-
-#: standalone/net_applet:280
-#, c-format
-msgid "A port scanning attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:281
-#, c-format
-msgid "The %s service has been attacked by %s."
-msgstr ""
-
-#: standalone/net_applet:282
-#, c-format
-msgid "A password cracking attack has been attempted by %s."
-msgstr ""
-
-#: standalone/net_applet:290
-#, fuzzy, c-format
-msgid "Active Firewall: intrusion detected"
-msgstr "Konfiguraĵo de barilo detektata!"
-
-#: standalone/net_applet:301
-#, fuzzy, c-format
-msgid "Do you want to blacklist the attacker?"
-msgstr "Ĉu vi deziras uzi tiun funkcion?"
-
-#: standalone/net_applet:315
-#, c-format
-msgid "Always blacklist (do not ask again)"
-msgstr ""
-
-#: standalone/net_applet:318
-#, fuzzy, c-format
-msgid "Attack details"
-msgstr "Neniaj detaloj"
-
-#: standalone/net_applet:322
-#, c-format
-msgid "Attack time: %s"
-msgstr ""
-
-#: standalone/net_applet:323
-#, c-format
-msgid "Network interface: %s"
-msgstr "Reta interfaco: %s"
-
-#: standalone/net_applet:324
-#, fuzzy, c-format
-msgid "Attack type: %s"
-msgstr "Speco: "
-
-#: standalone/net_applet:325
-#, c-format
-msgid "Protocol: %s"
-msgstr "Protokolo: %s"
-
-#: standalone/net_applet:326
-#, fuzzy, c-format
-msgid "Attacker IP address: %s"
-msgstr "Plej malalta IP-adreso:"
-
-#: standalone/net_applet:327
-#, fuzzy, c-format
-msgid "Attacker hostname: %s"
-msgstr "Salutnomo por prokura servilo:"
-
-#: standalone/net_applet:328
-#, fuzzy, c-format
-msgid "Service attacked: %s"
-msgstr "Servo-Administrilo"
-
-#: standalone/net_applet:329
-#, fuzzy, c-format
-msgid "Port attacked: %s"
-msgstr "Pordo: %s"
-
-#: standalone/net_applet:330
-#, c-format
-msgid "Type of ICMP attack: %s"
-msgstr ""
-
-#: standalone/net_monitor:61 standalone/net_monitor:66
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Reta Konfiguraĵo"
-
-#: standalone/net_monitor:104
-#, c-format
-msgid "Global statistics"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Instantaneous"
-msgstr ""
-
-#: standalone/net_monitor:107
-#, c-format
-msgid "Average"
-msgstr "Averaĝulo"
-
-#: standalone/net_monitor:108
-#, fuzzy, c-format
-msgid ""
-"Sending\n"
-"speed:"
-msgstr "Konservu en dosiero"
-
-#: standalone/net_monitor:109
-#, fuzzy, c-format
-msgid ""
-"Receiving\n"
-"speed:"
-msgstr "Konservu en dosiero"
-
-#: standalone/net_monitor:113
-#, fuzzy, c-format
-msgid ""
-"Connection\n"
-"time: "
-msgstr "Speco de konekto"
-
-#: standalone/net_monitor:120
-#, c-format
-msgid "Use same scale for received and transmitted"
-msgstr ""
-
-#: standalone/net_monitor:139
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Konfiguru interretan konektaĵon"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, fuzzy, c-format
-msgid "Disconnecting from Internet "
-msgstr "Konektu al la Interreto"
-
-#: standalone/net_monitor:188 standalone/net_monitor:201
-#, fuzzy, c-format
-msgid "Connecting to Internet "
-msgstr "Konektu al la Interreto"
-
-#: standalone/net_monitor:232
-#, fuzzy, c-format
-msgid "Disconnection from Internet failed."
-msgstr "Konektu al la Interreto"
-
-#: standalone/net_monitor:233
-#, fuzzy, c-format
-msgid "Disconnection from Internet complete."
-msgstr "Konektu al la Interreto"
-
-#: standalone/net_monitor:235
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Speco de konekto"
-
-#: standalone/net_monitor:236
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandriva Linux Control Center."
-msgstr ""
-
-#: standalone/net_monitor:341
-#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Interreta Konfigurado"
-
-#: standalone/net_monitor:389 standalone/net_monitor:409
-#, c-format
-msgid "sent: "
-msgstr ""
-
-#: standalone/net_monitor:396 standalone/net_monitor:413
-#, c-format
-msgid "received: "
-msgstr ""
-
-#: standalone/net_monitor:403
-#, c-format
-msgid "average"
-msgstr ""
-
-#: standalone/net_monitor:406
-#, fuzzy, c-format
-msgid "Local measure"
-msgstr "Lokaj dosieroj"
-
-#: standalone/net_monitor:467
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: standalone/net_monitor:478
-#, fuzzy, c-format
-msgid "No internet connection configured"
-msgstr "Interreta konektaĵo kaj konfiguro"
-
-#: standalone/printerdrake:68
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Loka printilo"
-
-#: standalone/printerdrake:116
-#, fuzzy, c-format
-msgid "%s Printer Management Tool"
-msgstr "Uzul-mastrumado \n"
-
-#: standalone/printerdrake:130 standalone/printerdrake:131
-#: standalone/printerdrake:132 standalone/printerdrake:133
-#: standalone/printerdrake:141 standalone/printerdrake:142
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Actions"
-msgstr "/_Agoj"
-
-#: standalone/printerdrake:130 standalone/printerdrake:142
-#, c-format
-msgid "/_Add Printer"
-msgstr "/_Aldonu printilo"
-
-#: standalone/printerdrake:131
-#, fuzzy, c-format
-msgid "/Set as _Default"
-msgstr " (Defaŭlta)"
-
-#: standalone/printerdrake:132
-#, c-format
-msgid "/_Edit"
-msgstr "/_Redaktu"
-
-#: standalone/printerdrake:133
-#, c-format
-msgid "/_Delete"
-msgstr "/_Forigu"
-
-#: standalone/printerdrake:134
-#, c-format
-msgid "/_Expert mode"
-msgstr "/_Spertuloreĝimo"
-
-#: standalone/printerdrake:139
-#, c-format
-msgid "/_Refresh"
-msgstr "/_Rekalkulu"
-
-#: standalone/printerdrake:146
-#, c-format
-msgid "/_Configure CUPS"
-msgstr "/_Konfiguru CUPS"
-
-#: standalone/printerdrake:181
-#, c-format
-msgid "Search:"
-msgstr "Serĉu:"
-
-#: standalone/printerdrake:184
-#, c-format
-msgid "Apply filter"
-msgstr "Apliku filtrilon"
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, c-format
-msgid "Def."
-msgstr ""
-
-#: standalone/printerdrake:211 standalone/printerdrake:218
-#, fuzzy, c-format
-msgid "Printer Name"
-msgstr "Printvica Nomo"
-
-#: standalone/printerdrake:211
-#, c-format
-msgid "Connection Type"
-msgstr "Konekto-tipo"
-
-#: standalone/printerdrake:218
-#, c-format
-msgid "Server Name"
-msgstr "Servil-nomo"
-
-#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:226
-#, fuzzy, c-format
-msgid "Add Printer"
-msgstr "Printilo"
-
-#: standalone/printerdrake:226
-#, fuzzy, c-format
-msgid "Add a new printer to the system"
-msgstr "Aldonu uzulon al la sistemo"
-
-#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:229
-#, fuzzy, c-format
-msgid "Set as default"
-msgstr "defaŭlta"
-
-#: standalone/printerdrake:229
-#, fuzzy, c-format
-msgid "Set selected printer as the default printer"
-msgstr ""
-"Ĉu vi deziras konfiguri tiun ĉi presilon (\"%s\")\n"
-"kiel defaŭltan presilon?"
-
-#: standalone/printerdrake:232
-#, fuzzy, c-format
-msgid "Edit selected printer"
-msgstr "Malinstalu printvicon"
-
-#: standalone/printerdrake:235
-#, fuzzy, c-format
-msgid "Delete selected printer"
-msgstr "Malinstalu printvicon"
-
-#: standalone/printerdrake:238
-#, c-format
-msgid "Refresh the list"
-msgstr "Rekalkulu la liston"
-
-#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/printerdrake:241
-#, fuzzy, c-format
-msgid "Configure CUPS"
-msgstr "Konfiguru X"
-
-#: standalone/printerdrake:241
-#, fuzzy, c-format
-msgid "Configure CUPS printing system"
-msgstr "Konfiguru retumon"
-
-#: standalone/printerdrake:299 standalone/printerdrake:337
-#, c-format
-msgid "Enabled"
-msgstr "Ŝaltita"
-
-#: standalone/printerdrake:300 standalone/printerdrake:338
-#, c-format
-msgid "Disabled"
-msgstr "Elŝaltita"
-
-#: standalone/printerdrake:560
-#, c-format
-msgid "Authors: "
-msgstr "Aŭtoroj: "
-
-#. -PO: here %s is the version number
-#: standalone/printerdrake:570
-#, fuzzy, c-format
-msgid "Printer Management %s"
-msgstr "Uzul-mastrumado \n"
-
-#: standalone/scannerdrake:51
-#, fuzzy, c-format
-msgid ""
-"SANE packages need to be installed to use scanners.\n"
-"\n"
-"Do you want to install the SANE packages?"
-msgstr "Ĉi tiu pakaĵo %s devas esti instalita. Ĉu vi deziras instali ĝin?"
-
-#: standalone/scannerdrake:55
-#, fuzzy, c-format
-msgid "Aborting Scannerdrake."
-msgstr "Elektu grafikan karton"
-
-#: standalone/scannerdrake:60
-#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
-msgstr ""
-
-#: standalone/scannerdrake:61
-#, c-format
-msgid "Scannerdrake will not be started now."
-msgstr ""
-
-#: standalone/scannerdrake:67 standalone/scannerdrake:491
-#, fuzzy, c-format
-msgid "Searching for configured scanners..."
-msgstr "Loka printilo"
-
-#: standalone/scannerdrake:71 standalone/scannerdrake:495
-#, fuzzy, c-format
-msgid "Searching for new scanners..."
-msgstr "Loka printilo"
-
-#: standalone/scannerdrake:79 standalone/scannerdrake:517
-#, c-format
-msgid "Re-generating list of configured scanners..."
-msgstr ""
-
-#: standalone/scannerdrake:101
-#, c-format
-msgid "The %s is not supported by this version of %s."
-msgstr ""
-
-#: standalone/scannerdrake:104
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Ĉu vi deziras konfiguri printilon?"
-
-#: standalone/scannerdrake:116
-#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: standalone/scannerdrake:131
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Elektu grafikan karton"
-
-#: standalone/scannerdrake:132
-#, c-format
-msgid " ("
-msgstr " ("
-
-#: standalone/scannerdrake:133
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Duobla surmetingo %s"
-
-#: standalone/scannerdrake:136
-#, c-format
-msgid "Port: %s"
-msgstr "Pordo: %s"
-
-#: standalone/scannerdrake:138 standalone/scannerdrake:141
-#, c-format
-msgid " (UNSUPPORTED)"
-msgstr ""
-
-#: standalone/scannerdrake:144
-#, fuzzy, c-format
-msgid "The %s is not supported under Linux."
-msgstr "La specifita protokolo ne estas subtenata."
-
-#: standalone/scannerdrake:171 standalone/scannerdrake:185
-#, c-format
-msgid "Do not install firmware file"
-msgstr ""
-
-#: standalone/scannerdrake:175 standalone/scannerdrake:227
-#, c-format
-msgid ""
-"It is possible that your %s needs its firmware to be uploaded everytime when "
-"it is turned on."
-msgstr ""
-
-#: standalone/scannerdrake:176 standalone/scannerdrake:228
-#, c-format
-msgid "If this is the case, you can make this be done automatically."
-msgstr ""
-
-#: standalone/scannerdrake:177 standalone/scannerdrake:231
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware file for your scanner so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:178 standalone/scannerdrake:232
-#, c-format
-msgid ""
-"You find the file on the CD or floppy coming with the scanner, on the "
-"manufacturer's home page, or on your Windows partition."
-msgstr ""
-
-#: standalone/scannerdrake:180 standalone/scannerdrake:239
-#, c-format
-msgid "Install firmware file from"
-msgstr ""
-
-#: standalone/scannerdrake:200
-#, fuzzy, c-format
-msgid "Select firmware file"
-msgstr "Elektu dosieron"
-
-#: standalone/scannerdrake:203 standalone/scannerdrake:262
-#, c-format
-msgid "The firmware file %s does not exist or is unreadable!"
-msgstr ""
-
-#: standalone/scannerdrake:226
-#, c-format
-msgid ""
-"It is possible that your scanners need their firmware to be uploaded "
-"everytime when they are turned on."
-msgstr ""
-
-#: standalone/scannerdrake:230
-#, c-format
-msgid ""
-"To do so, you need to supply the firmware files for your scanners so that it "
-"can be installed."
-msgstr ""
-
-#: standalone/scannerdrake:233
-#, c-format
-msgid ""
-"If you have already installed your scanner's firmware you can update the "
-"firmware here by supplying the new firmware file."
-msgstr ""
-
-#: standalone/scannerdrake:235
-#, c-format
-msgid "Install firmware for the"
-msgstr ""
-
-#: standalone/scannerdrake:258
-#, fuzzy, c-format
-msgid "Select firmware file for the %s"
-msgstr "Elektu dosieron"
-
-#: standalone/scannerdrake:276
-#, fuzzy, c-format
-msgid "Could not install the firmware file for the %s!"
-msgstr "Elektu dosieron"
-
-#: standalone/scannerdrake:289
-#, c-format
-msgid "The firmware file for your %s was successfully installed."
-msgstr ""
-
-#: standalone/scannerdrake:299
-#, c-format
-msgid "The %s is unsupported"
-msgstr ""
-
-#: standalone/scannerdrake:304
-#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
-msgstr ""
-
-#: standalone/scannerdrake:308 standalone/scannerdrake:315
-#: standalone/scannerdrake:345
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Malproksima printilo"
-
-#: standalone/scannerdrake:310 standalone/scannerdrake:356
-#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: standalone/scannerdrake:311
-#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
-
-#: standalone/scannerdrake:313 standalone/scannerdrake:358
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "Starta aparato"
-
-#: standalone/scannerdrake:347
-#, fuzzy, c-format
-msgid "Searching for scanners..."
-msgstr "Loka printilo"
-
-#: standalone/scannerdrake:383
-#, fuzzy, c-format
-msgid "Setting up kernel modules..."
-msgstr "Ŝarĝas la kernan modulon por la USB-a printilo ...\n"
-
-#: standalone/scannerdrake:390 standalone/scannerdrake:397
-#, fuzzy, c-format
-msgid "Attention!"
-msgstr "Altirfortoj"
-
-#: standalone/scannerdrake:391
-#, c-format
-msgid ""
-"Your %s cannot be configured fully automatically.\n"
-"\n"
-"Manual adjustments are required. Please edit the configuration file /etc/"
-"sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:392 standalone/scannerdrake:401
-#, c-format
-msgid ""
-"More info in the driver's manual page. Run the command \"man sane-%s\" to "
-"read it."
-msgstr ""
-
-#: standalone/scannerdrake:394 standalone/scannerdrake:403
-#, c-format
-msgid ""
-"After that you may scan documents using \"XSane\" or \"Kooka\" from "
-"Multimedia/Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:398
-#, c-format
-msgid ""
-"Your %s has been configured, but it is possible that additional manual "
-"adjustments are needed to get it to work. "
-msgstr ""
-
-#: standalone/scannerdrake:399
-#, c-format
-msgid ""
-"If it does not appear in the list of configured scanners in the main window "
-"of Scannerdrake or if it does not work correctly, "
-msgstr ""
-
-#: standalone/scannerdrake:400
-#, c-format
-msgid "edit the configuration file /etc/sane.d/%s.conf. "
-msgstr ""
-
-#: standalone/scannerdrake:406
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
-"Graphics in the applications menu."
-msgstr ""
-
-#: standalone/scannerdrake:431
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: standalone/scannerdrake:432
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Via komputilo ne havas retadaptilon!"
-
-#: standalone/scannerdrake:435 standalone/scannerdrake:438
-#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: standalone/scannerdrake:452
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Loka printilo"
-
-#: standalone/scannerdrake:458
-#, c-format
-msgid "Add a scanner manually"
-msgstr ""
-
-#: standalone/scannerdrake:465
-#, fuzzy, c-format
-msgid "Install/Update firmware files"
-msgstr "Elektu dosieron"
-
-#: standalone/scannerdrake:471
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Printilo"
-
-#: standalone/scannerdrake:530 standalone/scannerdrake:695
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Malproksima printilo"
-
-#: standalone/scannerdrake:542 standalone/scannerdrake:845
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "konformanta(j)"
-
-#: standalone/scannerdrake:582
-#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessible by remote machines and by which remote machines."
-msgstr ""
-
-#: standalone/scannerdrake:583
-#, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-
-#: standalone/scannerdrake:586
-#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
-
-#: standalone/scannerdrake:588
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Printilo"
-
-#: standalone/scannerdrake:602
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: standalone/scannerdrake:605
-#, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
-
-#: standalone/scannerdrake:632 standalone/scannerdrake:704
-#: standalone/scannerdrake:854
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Loka printilo"
-
-#: standalone/scannerdrake:633
-#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
-
-#: standalone/scannerdrake:644 standalone/scannerdrake:794
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Aldonu uzanto"
-
-#: standalone/scannerdrake:650 standalone/scannerdrake:800
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "Malinstalu printvicon"
-
-#: standalone/scannerdrake:659 standalone/scannerdrake:809
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Malinstalu printvicon"
-
-#: standalone/scannerdrake:683 standalone/scannerdrake:691
-#: standalone/scannerdrake:696 standalone/scannerdrake:742
-#: standalone/scannerdrake:833 standalone/scannerdrake:841
-#: standalone/scannerdrake:846 standalone/scannerdrake:892
-#, c-format
-msgid "Name/IP address of host:"
-msgstr ""
-
-#: standalone/scannerdrake:705 standalone/scannerdrake:855
-#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-
-#: standalone/scannerdrake:716 standalone/scannerdrake:866
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Bonvole, provu la muson"
-
-#: standalone/scannerdrake:727 standalone/scannerdrake:877
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
-
-#: standalone/scannerdrake:782
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Uzu liberan spacon"
-
-#: standalone/scannerdrake:783
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
-
-#: standalone/scannerdrake:940
-#, fuzzy, c-format
-msgid ""
-"saned needs to be installed to share the local scanner(s).\n"
-"\n"
-"Do you want to install the saned package?"
-msgstr "Ĉi tiu pakaĵo %s devas esti instalita. Ĉu vi deziras instali ĝin?"
-
-#: standalone/scannerdrake:944 standalone/scannerdrake:948
-#, c-format
-msgid "Your scanner(s) will not be available on the network."
-msgstr ""
-
-#: standalone/service_harddrake:104
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
-
-#: standalone/service_harddrake:105
-#, c-format
-msgid "- %s was removed\n"
-msgstr ""
-
-#: standalone/service_harddrake:108
-#, fuzzy, c-format
-msgid "Some devices were added: %s\n"
-msgstr "Musaparato: %s\n"
-
-#: standalone/service_harddrake:109
-#, c-format
-msgid "- %s was added\n"
-msgstr ""
-
-#: standalone/service_harddrake:203
-#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Duobla surmetingo %s"
-
-#: standalone/service_harddrake_confirm:7
-#, c-format
-msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
-msgstr ""
-
-#: standalone/service_harddrake_confirm:8
-#, fuzzy, c-format
-msgid "Do you want to run the appropriate config tool?"
-msgstr "Ĉu vi deziras provi la konfiguraĵon?"
-
-#: steps.pm:14
-#, c-format
-msgid "Language"
-msgstr "Elektu vian lingvon"
-
-#: steps.pm:15
-#, c-format
-msgid "License"
-msgstr "Licenco"
-
-#: steps.pm:16
-#, c-format
-msgid "Configure mouse"
-msgstr "Konfiguru muson"
-
-#: steps.pm:17
-#, c-format
-msgid "Hard drive detection"
-msgstr "Detektado de fiksdisko(j)"
-
-#: steps.pm:18
-#, c-format
-msgid "Select installation class"
-msgstr "Elektu instalklason"
-
-#: steps.pm:19
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Elektu vian klavaron"
-
-#: steps.pm:21
-#, c-format
-msgid "Partitioning"
-msgstr "Subdiskigante"
-
-#: steps.pm:22
-#, c-format
-msgid "Format partitions"
-msgstr "Formatu subdiskojn"
-
-#: steps.pm:23
-#, c-format
-msgid "Choose packages to install"
-msgstr "Elektu pakaĵojn"
-
-#: steps.pm:24
-#, c-format
-msgid "Install system"
-msgstr "Instalu sistemon"
-
-#: steps.pm:25
-#, fuzzy, c-format
-msgid "Administrator password"
-msgstr "Difinu pasvorton de root"
-
-#: steps.pm:26
-#, c-format
-msgid "Add a user"
-msgstr "Aldonu uzulon"
-
-#: steps.pm:27
-#, c-format
-msgid "Configure networking"
-msgstr "Konfiguru retumon"
-
-#: steps.pm:28
-#, c-format
-msgid "Install bootloader"
-msgstr "Instalu restart-ŝargilon"
-
-#: steps.pm:29
-#, c-format
-msgid "Configure X"
-msgstr "Konfiguru X"
-
-#: steps.pm:31
-#, c-format
-msgid "Configure services"
-msgstr "Konfiguru servojn"
-
-#: steps.pm:32
-#, c-format
-msgid "Install updates"
-msgstr "Instalu ĝisdatigojn"
-
-#: steps.pm:33
-#, c-format
-msgid "Exit install"
-msgstr "Eliru instalprogramon"
-
-#: ugtk2.pm:908
-#, c-format
-msgid "Is this correct?"
-msgstr "Ĉu tio ĉi pravas?"
-
-#: ugtk2.pm:968
-#, fuzzy, c-format
-msgid "No file chosen"
-msgstr "dosier-elektilo"
-
-#: ugtk2.pm:970
-#, c-format
-msgid "You have chosen a file, not a directory"
-msgstr ""
-
-#: ugtk2.pm:972
-#, fuzzy, c-format
-msgid "You have chosen a directory, not a file"
-msgstr "Hejmdosierujo ne estas alirebla."
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such directory"
-msgstr "Ne estas dosierujo"
-
-#: ugtk2.pm:974
-#, fuzzy, c-format
-msgid "No such file"
-msgstr "Lokala dosiero"
-
-#: ugtk2.pm:1055
-#, c-format
-msgid "Expand Tree"
-msgstr "Etendu Arbon"
-
-#: ugtk2.pm:1056
-#, c-format
-msgid "Collapse Tree"
-msgstr "Maletendu Arbon"
-
-#: ugtk2.pm:1057
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Ŝanĝu inter ebena kaj ordigita je grupoj"
-
-#: wizards.pm:95 wizards2.pm:95
-#, c-format
-msgid ""
-"%s is not installed\n"
-"Click \"Next\" to install or \"Cancel\" to quit"
-msgstr ""
-
-#: wizards.pm:99 wizards2.pm:99
-#, c-format
-msgid "Installation failed"
-msgstr "Instalado malsukcesis"
-
-#~ msgid ""
-#~ "Your system is low on resources. You may have some problem installing\n"
-#~ "Mandriva Linux. If that occurs, you can try a text install instead. For "
-#~ "this,\n"
-#~ "press `F1' when booting on CDROM, then enter `text'."
-#~ msgstr ""
-#~ "Via sistemo havas malmulte da risurcoj.  Eble vi havos problemojn pri\n"
-#~ "instali Linuks-Mandrejkon.  Se tio okazos, vi povos anstataŭ provi "
-#~ "tekstan\n"
-#~ "instaladon.  Por ĉi tio, premu `F1' kiam vi startas de KDROM, kaj sekve\n"
-#~ "tajpu `text'."
-
-#~ msgid ""
-#~ "Contacting Mandriva Linux web site to get the list of available mirrors..."
-#~ msgstr ""
-#~ "Mi kontaktas la Mandriva Linuksan retpaĝon por havigi la liston de "
-#~ "disponeblaj speguloj..."
-
-#~ msgid "Mandriva Linux Installation %s"
-#~ msgstr "Linuks-Mandrejka Instalado %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "WARNING: this device has been previously configured to connect to the "
-#~ "Internet.\n"
-#~ "Modifying the fields below will override this configuration.\n"
-#~ "Do you really want to reconfigure this device?"
-#~ msgstr ""
-#~ "AVERTO: Ĉi tiu aparato estis antaŭe konfigurita por konekti al la "
-#~ "Interreto.\n"
-#~ "Simple akceptu konservi la konfiguron de ĉi tiu aparato.\n"
-#~ "Se vi modifos la subajn kampojn, vi ŝanĝos ĉi tiun konfiguron."
-
-#, fuzzy
-#~ msgid "hd"
-#~ msgstr "Ĉado"
-
-#, fuzzy
-#~ msgid "tape"
-#~ msgstr "Bendo"
-
-#, fuzzy
-#~ msgid "first step creation"
-#~ msgstr "Startdiskokreado"
-
-#, fuzzy
-#~ msgid "choose image file"
-#~ msgstr "Elektu agon"
-
-#~ msgid "Browse"
-#~ msgstr "Foliumu"
-
-#, fuzzy
-#~ msgid "Configure bootsplash picture"
-#~ msgstr "Konfiguru servojn"
-
-#~ msgid "Preview"
-#~ msgstr "Antaŭrigardo"
-
-#, fuzzy
-#~ msgid "Choose color"
-#~ msgstr "Elektu ekranon"
-
-#, fuzzy
-#~ msgid "Notice"
-#~ msgstr "agrabla(j)"
-
-#, fuzzy
-#~ msgid "You must choose an image file first!"
-#~ msgstr "Printila Aparato URI"
-
-#, fuzzy
-#~ msgid "Generating preview..."
-#~ msgstr "Detektas aparatojn..."
-
-#~ msgid "No floppy drive available"
-#~ msgstr "Neniu disketilo havebla"
-
-#~ msgid "Please insert the Update Modules floppy in drive %s"
-#~ msgstr ""
-#~ "Enŝovu la disketon kun ĝisdatigaj moduloj (Update Modules) en drajvo %s"
-
-#, fuzzy
-#~ msgid ""
-#~ "_: keyboard\n"
-#~ "Tifinagh (+latin/arabic)"
-#~ msgstr "Jugoslava (latina)"
-
-#~ msgid "No network card"
-#~ msgstr "neniu retkarto"
-
-#~ msgid "Installing HPOJ package..."
-#~ msgstr "Instalanta pakaĵon HPOJ..."
-
-#~ msgid ""
-#~ "Insert a floppy in drive\n"
-#~ "All data on this floppy will be lost"
-#~ msgstr ""
-#~ "Enŝovu disketon en drajvo\n"
-#~ "Ĉiuj datenoj sur tiu disketo estos perdata"
-
-#~ msgid "Insert a FAT formatted floppy in drive %s"
-#~ msgstr "Enŝovu FAT-formatitan disketon en drajvo %s"
-
-#~ msgid "Load/Save on floppy"
-#~ msgstr "Ŝargu/Konservu sur disketo"
-
-#~ msgid ""
-#~ "Please choose load or save package selection on floppy.\n"
-#~ "The format is the same as auto_install generated floppies."
-#~ msgstr ""
-#~ "Bonvole elektu ŝargu aŭ konservu pakaĵ-elekton sur disketo.\n"
-#~ "La formato estas la sama kiel disketoj generitaj per auto_install."
-
-#~ msgid "Load from floppy"
-#~ msgstr "Ŝargu de disketo"
-
-#~ msgid "Save on floppy"
-#~ msgstr "Konservu sur disketo"
-
-#~ msgid "Package selection"
-#~ msgstr "Elektado de Pakaĵoj"
-
-#~ msgid "Loading from floppy"
-#~ msgstr "Ŝargas de disketo"
-
-#~ msgid "Insert a floppy containing package selection"
-#~ msgstr "Enŝovu disketon kun pakaĵ-selekto en drajvo"
-
-#, fuzzy
-#~ msgid "Active Firewall : intrusion detected"
-#~ msgstr "Konfiguraĵo de barilo detektata!"
-
-#, fuzzy
-#~ msgid "Do you want to blacklist the attacker ?"
-#~ msgstr "Ĉu vi deziras uzi tiun funkcion?"
-
-#, fuzzy
-#~ msgid "Application:"
-#~ msgstr "Aŭtentikigado"
-
-#, fuzzy
-#~ msgid "Release: "
-#~ msgstr "Bonvole atendu"
-
-#, fuzzy
-#~ msgid "Summary: "
-#~ msgstr "Resumo"
-
-#, fuzzy
-#~ msgid "Submit kernel version"
-#~ msgstr "Kerna versio"
-
-#, fuzzy
-#~ msgid "connecting to %s..."
-#~ msgstr "Legas datumbason de CUPS peliloj..."
-
-#, fuzzy
-#~ msgid "Please enter a package name."
-#~ msgstr "Bonvole donu salutnomon"
-
-#, fuzzy
-#~ msgid "Loading printer configuration... Please wait"
-#~ msgstr "Interreta Konfigurado"
-
-#, fuzzy
-#~ msgid "The "
-#~ msgstr "Temoj"
-
-#, fuzzy
-#~ msgid "%s (was %s)"
-#~ msgstr "%s (Pordo%s)"
-
-#~ msgid "Root password"
-#~ msgstr "Root-pasvorto"
-
-#, fuzzy
-#~ msgid "Do you want to recover your system?"
-#~ msgstr "Ĉu vi deziras uzi aboot-on?"
-
-#, fuzzy
-#~ msgid "Samba server"
-#~ msgstr "NIS Servilo"
-
-#~ msgid "Move"
-#~ msgstr "Movu"
-
-#~ msgid "Which disk do you want to move it to?"
-#~ msgstr "Al kiu disko vi deziras movi?"
-
-#~ msgid "Sector"
-#~ msgstr "Sektoro"
-
-#~ msgid "Which sector do you want to move it to?"
-#~ msgstr "Al kiu sektoro vi deziras movi?"
-
-#~ msgid "Moving"
-#~ msgstr "Movante"
-
-#~ msgid "Moving partition..."
-#~ msgstr "Movas subdisko..."
-
-#~ msgid "Error opening %s for writing: %s"
-#~ msgstr "Eraro dum malfermado de %s por skribi: %s"
-
-#~ msgid "OK"
-#~ msgstr "Jes"
-
-#~ msgid "Czech (QWERTZ)"
-#~ msgstr "Ĉeĥa (QWERTZ)"
-
-#~ msgid "German"
-#~ msgstr "Germana"
-
-#~ msgid "Dvorak"
-#~ msgstr "Dvorak-a"
-
-#~ msgid "Spanish"
-#~ msgstr "Hispana"
-
-#~ msgid "Finnish"
-#~ msgstr "Finna"
-
-#~ msgid "French"
-#~ msgstr "Franca"
-
-#~ msgid "Norwegian"
-#~ msgstr "Norvega"
-
-#~ msgid "Polish"
-#~ msgstr "Pola"
-
-#~ msgid "Russian"
-#~ msgstr "Rusa"
-
-#~ msgid "Swedish"
-#~ msgstr "Sveda"
-
-#~ msgid "Albanian"
-#~ msgstr "Albana"
-
-#~ msgid "Armenian (old)"
-#~ msgstr "Armena (malnova)"
-
-#~ msgid "Armenian (typewriter)"
-#~ msgstr "Armena (skribmaŝina)"
-
-#~ msgid "Armenian (phonetic)"
-#~ msgstr "Armena (fonetika)"
-
-#~ msgid "Arabic"
-#~ msgstr "araba"
-
-#~ msgid "Azerbaidjani (latin)"
-#~ msgstr "Azerbajĝana (latina)"
-
-#~ msgid "Belgian"
-#~ msgstr "Belga"
-
-#~ msgid "Bengali"
-#~ msgstr "bengala"
-
-#~ msgid "Bulgarian (phonetic)"
-#~ msgstr "Bulgara (fonetika)"
-
-#~ msgid "Bulgarian (BDS)"
-#~ msgstr "Bulgara (BDS)"
-
-#~ msgid "Brazilian (ABNT-2)"
-#~ msgstr "Brazila (ABNT-2)"
-
-#~ msgid "Bosnian"
-#~ msgstr "Bosna"
-
-#~ msgid "Belarusian"
-#~ msgstr "Belarusa"
-
-#~ msgid "Swiss (German layout)"
-#~ msgstr "Svisa (germana aranĝo)"
-
-#~ msgid "Swiss (French layout)"
-#~ msgstr "Svisa (franca aranĝo)"
-
-#~ msgid "Czech (QWERTY)"
-#~ msgstr "Ĉeĥa (QWERTY)"
-
-#~ msgid "German (no dead keys)"
-#~ msgstr "Germana (neniom da mortaj klavoj)"
-
-#~ msgid "Devanagari"
-#~ msgstr "devanagara"
-
-#~ msgid "Danish"
-#~ msgstr "Dana"
-
-#~ msgid "Dvorak (US)"
-#~ msgstr "Dvorak-a (US)"
-
-#~ msgid "Dvorak (Norwegian)"
-#~ msgstr "Dvorak-a (Norvega)"
-
-#~ msgid "Dvorak (Swedish)"
-#~ msgstr "Dvorak-a (Sveda)"
-
-#~ msgid "Estonian"
-#~ msgstr "Estona"
-
-#~ msgid "Georgian (\"Russian\" layout)"
-#~ msgstr "Kartvela (\"Rusa\" aranĝo)"
-
-#~ msgid "Georgian (\"Latin\" layout)"
-#~ msgstr "Kartvela (\"Latina\" aranĝo)"
-
-#~ msgid "Greek"
-#~ msgstr "Greka"
-
-#~ msgid "Gujarati"
-#~ msgstr "gujarata"
-
-#~ msgid "Gurmukhi"
-#~ msgstr "gumurka"
-
-#~ msgid "Hungarian"
-#~ msgstr "Hungara"
-
-#~ msgid "Croatian"
-#~ msgstr "Kroata"
-
-#~ msgid "Israeli"
-#~ msgstr "Israela"
-
-#~ msgid "Israeli (Phonetic)"
-#~ msgstr "Israela (fonetika)"
-
-#~ msgid "Iranian"
-#~ msgstr "Irana"
-
-#~ msgid "Icelandic"
-#~ msgstr "Islanda"
-
-#~ msgid "Italian"
-#~ msgstr "Itala"
-
-#~ msgid "Inuktitut"
-#~ msgstr "inuita"
-
-#~ msgid "Japanese 106 keys"
-#~ msgstr "Japana 106 klavoj"
-
-#~ msgid "Korean keyboard"
-#~ msgstr "Korea klavaro"
-
-#~ msgid "Latin American"
-#~ msgstr "Latinamerika"
-
-#~ msgid "Laotian"
-#~ msgstr "Laosa"
-
-#~ msgid "Lithuanian AZERTY (old)"
-#~ msgstr "Litova AZERTY-a (malnova)"
-
-#~ msgid "Lithuanian AZERTY (new)"
-#~ msgstr "Litova AZERTY-a (nova)"
-
-#~ msgid "Lithuanian \"number row\" QWERTY"
-#~ msgstr "Litova \"numero-vica\" QWERTY-a"
-
-#~ msgid "Lithuanian \"phonetic\" QWERTY"
-#~ msgstr "Litova \"fonetika\" QWERTY-a"
-
-#~ msgid "Latvian"
-#~ msgstr "Latva"
-
-#~ msgid "Malayalam"
-#~ msgstr "Malajalama"
-
-#~ msgid "Macedonian"
-#~ msgstr "Macedona"
-
-#~ msgid "Myanmar (Burmese)"
-#~ msgstr "Mianmara (burma)"
-
-#~ msgid "Mongolian (cyrillic)"
-#~ msgstr "Mongola (cirila)"
-
-#~ msgid "Maltese (UK)"
-#~ msgstr "Malta (UK)"
-
-#~ msgid "Maltese (US)"
-#~ msgstr "Malta (US)"
-
-#~ msgid "Dutch"
-#~ msgstr "Nederlanda"
-
-#~ msgid "Polish (qwerty layout)"
-#~ msgstr "Pola (qwerty aranĝo)"
-
-#~ msgid "Polish (qwertz layout)"
-#~ msgstr "Pola (qwertz aranĝo)"
-
-#~ msgid "Portuguese"
-#~ msgstr "Portugala"
-
-#~ msgid "Canadian (Quebec)"
-#~ msgstr "Kanada (Kebeka)"
-
-#~ msgid "Romanian (qwertz)"
-#~ msgstr "Rumana (qwertz-a)"
-
-#~ msgid "Romanian (qwerty)"
-#~ msgstr "Rumana (qwerty-a)"
-
-#~ msgid "Russian (Phonetic)"
-#~ msgstr "Rusa (fonetika)"
-
-#~ msgid "Slovenian"
-#~ msgstr "Slovena"
-
-#~ msgid "Slovakian (QWERTZ)"
-#~ msgstr "Slovaka (QWERTZ)"
-
-#~ msgid "Slovakian (QWERTY)"
-#~ msgstr "Slovaka (QWERTY)"
-
-#~ msgid "Serbian (cyrillic)"
-#~ msgstr "Serba (cirila)"
-
-#~ msgid "Tamil (ISCII-layout)"
-#~ msgstr "Tamila (ISCII)"
-
-#~ msgid "Tamil (Typewriter-layout)"
-#~ msgstr "Tamila (skribmaŝina)"
-
-#~ msgid "Thai keyboard"
-#~ msgstr "Taja klavaro"
-
-#~ msgid "Turkish (traditional \"F\" model)"
-#~ msgstr "Turka (tradicia \"F\" modelo)"
-
-#~ msgid "Turkish (modern \"Q\" model)"
-#~ msgstr "Turka (moderna \"Q\" modelo)"
-
-#~ msgid "Ukrainian"
-#~ msgstr "Ukrajna"
-
-#~ msgid "Vietnamese \"numeric row\" QWERTY"
-#~ msgstr "Vjetnama \"numero-vica\" QWERTY-a"
-
-#~ msgid "Yugoslavian (latin)"
-#~ msgstr "Jugoslava (latina)"
-
-#~ msgid "Enable multiple profiles"
-#~ msgstr "Ebligu multoblajn profilojn"
-
-#~ msgid ""
-#~ "You now have the opportunity to download updated packages. These "
-#~ "packages\n"
-#~ "have been updated after the distribution was released. They may\n"
-#~ "contain security or bug fixes.\n"
-#~ "\n"
-#~ "To download these packages, you will need to have a working Internet \n"
-#~ "connection.\n"
-#~ "\n"
-#~ "Do you want to install the updates ?"
-#~ msgstr ""
-#~ "Vi havas nun la eblecon deŝuti ĝisdatigitajn pakaĵojn. Tiuj pakaĵoj\n"
-#~ "estas ĝisdatigitaj post eldonado de tiu ĉi eldono. Ili povas\n"
-#~ "enteni sekureco- aŭ eraro-riparojn.\n"
-#~ "\n"
-#~ "Por deŝuti tiujn pakaĵojn, vi bezonas funkciantan Interret-\n"
-#~ "konekton.\n"
-#~ "\n"
-#~ "Ĉu vi deziras instali tiujn ĝisdatigojn?"
-
-#~ msgid "Installing bootloader"
-#~ msgstr "Instalas start-ŝargilon"
-
-#~ msgid ""
-#~ "You may now provide options to module %s.\n"
-#~ "Options are in format ``name=value name2=value2...''.\n"
-#~ "For instance, ``io=0x300 irq=7''"
-#~ msgstr ""
-#~ "Nun vi povas provizi ĝiajn opciojn al modulo %s.\n"
-#~ "Opcioj estas en la formo ``nomo=valoro nomo2=valoro2 ...''.\n"
-#~ "Ekzemple, ``io=0x300 irq=7''"
-
-#~ msgid "Installation of %s failed. The following error occurred:"
-#~ msgstr "Instalado de %s malsukcesis.  La sekvanta eraro okazis:"
-
-#~ msgid "/dev/hda"
-#~ msgstr "/dev/hda"
-
-#~ msgid "/dev/hdb"
-#~ msgstr "/dev/hdb"
-
-#~ msgid "/dev/fd0"
-#~ msgstr "/dev/fd0"
-
-#~ msgid ""
-#~ "No ethernet network adapter has been detected on your system.\n"
-#~ "I cannot set up this connection type."
-#~ msgstr ""
-#~ "Mi ne detektas eterretan retadaptilom sur via sistemo.\n"
-#~ "Mi ne povas konfiguri tiun konektotipon."
-
-#~ msgid ""
-#~ "Please choose which network adapter you want to use to connect to "
-#~ "Internet."
-#~ msgstr ""
-#~ "Bonvole elektu kiun retadaptilon vi deziras uzi por konekti al la "
-#~ "interreto"
-
-#~ msgid "chunk size"
-#~ msgstr "grandeco de pecoj"
-
-#~ msgid "mkraid failed (maybe raidtools are missing?)"
-#~ msgstr "mkraid malsukcesis (eble raidtools mankas)"
-
-#~ msgid "mkraid failed"
-#~ msgstr "mkraid malsukcesis"
-
-#~ msgid "The package %s is needed. Install it?"
-#~ msgstr "La pakaĵo %s estas bezonata. Ĉu instali ĝin?"
-
-#~ msgid "SILO Installation"
-#~ msgstr "SILO Instalado"
-
-#~ msgid "First sector of boot partition"
-#~ msgstr "Unua sektoro de starta subdisko"
-
-#~ msgid "Bootloader installation"
-#~ msgstr "Startŝargila instalado"
-
-#~ msgid ""
-#~ "You can export using NFS or SMB. Please select which you'd like to use."
-#~ msgstr ""
-#~ "Vi povas eksporti uzante NFS aŭ SMB. Bonvole elektu kiun vi ŝatus uzi."
-
-#~ msgid ""
-#~ "You can export using NFS or Samba. Please select which you'd like to use."
-#~ msgstr ""
-#~ "Vi povas eksporti uzante NFS aŭ Samba. Bonvole elektu kiun vi ŝatus uzi."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Via karto povas havi 3D aparatan akceladon, sed nur kun Xorg %s.\n"
-#~ "Xorg %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#~ msgid ""
-#~ "Your card can have 3D hardware acceleration support but only with Xorg %"
-#~ "s,\n"
-#~ "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-#~ "Your card is supported by Xorg %s which may have a better support in 2D."
-#~ msgstr ""
-#~ "Via karto povas havi 3D aparatan akceladon, sed nur kun Xorg %s.\n"
-#~ "NOTU KE ĈI TIO ESTAS EKSPERIMENTA SUBTENO KAJ EBLE SVENIGOS VIAN "
-#~ "KOMPUTILON.\n"
-#~ "Xorg %s subtenas vian karton kiu eble havas pli bonan subtenon en 2D."
-
-#~ msgid "Xpmac (installation display driver)"
-#~ msgstr "Xpmac (installad-ekran-pelilo)"
-
-#~ msgid "4 billion colors (32 bits)"
-#~ msgstr "4 miliardoj koloroj (32 bitoj)"
-
-#~ msgid "XFree86 server: %s\n"
-#~ msgstr "XFree86 servilo: %s\n"
-
-#~ msgid "Here is the full list of keyboards available"
-#~ msgstr "Jen la kompleta listo de haveblaj klavaroj"
-
-#~ msgid "Please insert the Boot floppy used in drive %s"
-#~ msgstr "Enŝovu la uzitan startigan disketon en drajvo %s"
-
-#~ msgid "Provider dns 1 (optional)"
-#~ msgstr "Provizanto DNS 1 (nedeviga)"
-
-#~ msgid "Provider dns 2 (optional)"
-#~ msgstr "Provizanto DNS 2 (nedeviga)"
-
-#~ msgid "European protocol"
-#~ msgstr "Eŭropa protokolo"
-
-#~ msgid "What kind is your ISDN connection?"
-#~ msgstr "Kia estas via ISDN-a konektaĵo?"
-
-#~ msgid ""
-#~ "I have detected an ISDN PCI card, but I do not know its type. Please "
-#~ "select a PCI card on the next screen."
-#~ msgstr ""
-#~ "Mi detektis ISDN-an PCI-an Karton, sed mi ne scias la specon.  Bonvole "
-#~ "elektu\n"
-#~ "unu el la PCI-aj kartojn sur la sekvanta ekrano."
-
-#~ msgid "No ISDN PCI card found. Please select one on the next screen."
-#~ msgstr ""
-#~ "Neniu ISDN-a PCI-a karto trovata.  Bonvole elektu unu el la PCI-aj "
-#~ "kartojn sur\n"
-#~ "la sekvanta ekrano."
-
-#~ msgid "Gnome Workstation"
-#~ msgstr "Gnoma Laborstacio"
-
-#~ msgid "utopia 25"
-#~ msgstr "utopia 25"
-
-#~ msgid "Compact"
-#~ msgstr "Kompakta"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
deleted file mode 100644
index a1284b122..000000000
--- a/perl-install/share/po/es.po
+++ /dev/null

path: root/perl-install/share/po/help-zh_CN.pot

msgid ""
msgstr ""
"Content-Type: text/plain; charset=UTF-8\n"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrivalinux's use of UTF-8 will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
"第一步是选择您首选的语言。\n"
"\n"
"您对首选语言的选择将影响安装程序、文档及系统的总体配置。请先选择您所在的地区，然后选择您讲的语言。\n"
"\n"
"\n"
"单击\"%s\"按钮以后，您可以选择要在您的工作站上安装哪些额外的语言，即为系统文档和应用程序安装特定语言的文件。例如，如果您的计算机要为繁体中文的用户提供服务，请在树视图中选择简体中文作为默认语言，然后在高级选项中选择\"%s\"。\n"
"\n"
"关于 UTF-8 (Unicode) 支持：Unicode 是一种新的字符编码，该编码可支持所有现存的语言。但是，在 GNU/Linux 下完全支持\n"
"Unicode，仍然在开发和完善中。由此原因，Mandrivalinux 会根据用户的选择是否使用 UTF-8：\n"
"\n"
" * 如果您所选的语言自身有强制性的编码(latin1 语言、俄语、日语、中文、朝鲜语、泰语、希腊语、土耳其语及大多数 iso-8859-2\n"
"语言)，则会默认使用强制编码；\n"
"\n"
" * 其它语言默认会使用 Unicode；\n"
"\n"
" * 如果需要两种或更多种语言，而这两种语言所使用的编码并不相同，则整个系统都会使用 Unicode；\n"
"\n"
" * 最后，如果要强制系统使用 Unicode，而不管选中的是哪个或哪些语言，则应选中选项\"%s\"。\n"
"\n"
"\n"
"请注意，系统没有限制您只能选择一种额外的语言。您可以选择多种语言，甚至选择\"%s\"框表明您想要安装全部语言。选择支持某种语言，意味着同时安装该语言的翻译、字体、拼写检查程序等等。\n"
"\n"
"要在系统中所安装的不同语言之间切换，请以 \"root\" 身份执行 \"/usr/sbin/localedrake\"\n"
"命令，这样可以更改整个系统所用的语言。以普通用户执行该命令，只会更改特定用户的语言设置。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card isn't the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\"：如果在您的系统中检测到了声卡，则会在此处显示。如果您发现在此显示的声卡与您系统中实际安装的声卡并不相同，您可以单击该按钮选择不同的驱动程序。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"You now need to decide where you want to install the Mandrivalinux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandrivalinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandrivalinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrivalinux system, choose\n"
"this option. Be careful, because you won't be able to undo this operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"在这一步里，您需要决定您想要将 Mandrivalinux\n"
"操作系统安装到硬盘的何处。如果您的硬盘完全是空的，或者已有操作系统使用了所有的空间，您就必须要对硬盘进行分区。粗略的说，对硬盘进行分区就是将其划分成几个逻辑上不同的部分，以便创建安装您新的\n"
"Mandrivalinux 系统所需的空间。\n"
"\n"
"由于对硬盘进行分区通常是不可恢复的，并且可能导致数据丢失，所以对于没有经验的用户来说，分区是十分危险的操作。所幸的是，DrakX\n"
"所包含的向导能够显著简化这一过程。在继续这一步骤之前，请花点时间仔细阅读本节及以上的所有内容。\n"
"\n"
"根据您的硬盘配置不同，您可从以下选项中加以选择：\n"
"\n"
" * \"%s\"。此选项将对您的空驱动器执行自动分区。如果您使用此选项，则不会有任何后续的提示。\n"
"\n"
" * \"%s\"。向导检测到了硬盘上有一个或多个已有的 Linux\n"
"分区。如果您想要使用这些分区，请选择此选项。稍后，安装程序会让您选择与每个分区关联的挂载点。先前的挂载点默认已经选中了，而保留这些选项是个不错的主意。\n"
"\n"
" * \"%s\"。如果在您的硬盘上安装了 Microsoft Windows，而该操作系统占用了所有的空间，您就需要为 GNU/Linux\n"
"创建剩余空间。要完成这一操作，您可以删除您的 Microsoft Windows 分区和数据(参看``删除整个磁盘''方案)，或者更改\n"
"Microsoft Windows FAT 或 NTFS 分区的大小。更改分区大小通常不会造成任何数据丢失，但您必须事先对 Windows\n"
"分区进行了磁盘碎片整理。我们强烈推荐您事先备份您的数据。如果您想要在同一台计算机上使用 Mandrivalinux 和 Microsoft\n"
"Windows，则推荐使用此选项。\n"
"\n"
"   注意，在执行这一过程之后，您原有的 Microsoft Windows 分区将会比先前小一些。而您在 Microsoft Windows\n"
"下可用来存储数据或安装新软件的剩余空间也会变少。\n"
"\n"
" * \"%s\"。如果您想要删除硬盘上的全部数据和全部分区，并将其替换为全新的 Mandrivalinux\n"
"系统，请选择此选项。请额外小心，因为在您确认之后，此操作无法撤销。\n"
"\n"
"   !! 如果您选择了此选项，您硬盘上的全部数据都将被删除。 !!\n"
"\n"
" * \"%s\"。当硬盘完全被 Microsoft Windows 占用时，会出现此选项。选择此选项将删除硬盘上的全部内容，然后从头开始进行分区。\n"
"\n"
"   !! 如果您选择了此选项，您硬盘上的全部数据都将被删除。 !!\n"
"\n"
" *\n"
"\"%s\"。如果您想要手动对您的硬盘进行分区，请选择此选项。请额外小心——该功能十分强大，但也很危险，您可能在不经意之间毁掉您的全部数据。这也正是为什么我们只对那些以前执行过类似操作并有些经验的用户才推荐此选项的原因。要获得关于如何使用\n"
"DiskDrake 工具的更多说明，请参阅``初学者指南''一书中的``管理您的分区''一节。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"分辨率\n"
"\n"
"   \n"
"您可以在此选择分辨率和颜色深度，但您的显示卡硬件要支持。请选择最适合您需要的选项(您在安装完成之后仍可进行修改)。所选配置的例子会显示在显示器上。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\"：单击\"%s\"按钮将打开打印机配置向导。请参看``初学者指南''中的相应章节，其中详细描述了如何设置新打印机。那里给出的界面与安装时所用的界面大体相同。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point won't be authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system won't work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you won't affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and don't care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux 是多用户系统，这意味着每个用户可拥有自己独立的首选项，以及自己的文件，等等。但是与系统管理员 \"root\"\n"
"不同，您在此处添加的用户所能做的更改将仅限于他们自己的文件及他们自己的配置，这可使系统免遭有意无意的破坏。您至少需要为您自己创建一个普通用户 --\n"
"这应该是您每天所使用的主要账户。尽管以 \"root\"\n"
"登录很容易，您可以不受任何限制地完成任何操作，但这很危险！非常低级的错误就可能让您的系统再也无法启动。如果您以普通用户的身份犯了非常危险的错误，最坏的情况也就是丢失某些信息，而不会影响整个系统。\n"
"\n"
"第一个输入框会要求您输入真实姓名。当然，这并不是必需的 -- 您当然可以输入你喜欢的任何内容。DrakX\n"
"将会使用您在此输入框中输入的第一个单词作为\"%s\"的初始值，即此用户登录系统所用的名称。如果您喜欢的话，您也可以不使用默认值，而换用您喜欢的用户名。下一步就是输入密码。从安全的角度来说，非特权(普通)用户密码并没有\n"
"\"root\" 密码那么需要保密，但是也没有理由忽视这个密码，而将其留空或设置得太简单：毕竟，您得为您自己的文件负责。\n"
"\n"
"您单击\"%s\"之后，您还可以为您的亲朋好友分别添加用户。当您添加完用户之后，请单击\"%s\"。\n"
"\n"
"单击\"%s\"按钮允许您更改该用户的默认 \"shell\"(默认为 bash)。\n"
"\n"
"\n"
"当您添加完用户之后，您可以从中选择一个用户，计算机启动后将自动以该用户的身份登录到系统。如果您对此特性感兴趣(也不考虑太多的本地安全性)，请选择希望的用户和窗口管理器，然后单击\"%s\"。如果您对此特性不感兴趣，请不要选中\"%s\"框。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"选项\n"
"\n"
"   您可以在此选择是否想要在计算机启动的时候就切换到图形界面。显然，如果本机将用作服务器，或者您的显示配置还没有成功，您可能想要选择\"%s\"。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you don't know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandrivalinux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"在这里，DrakX 将允许您选择计算机要使用的安全级别。说的直白一点，如果计算机将包含关键数据，或者将直接暴露于 Internet\n"
"之下，则应该设置较高的安全级别。较高的安全级别通常以损失易用性作为代价。\n"
"\n"
"如果您不知道要选择什么，请保持默认选项。您可以稍后从 Mandrivalinux Control Center的一部分 draksec\n"
"来更改安全级别。\n"
"\n"
"请在\"%s\"域中填入要负责安全的人的电子邮件地址。安全信息将被发送到该地址。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandrivalinux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandrivalinux system. Your current partitioning\n"
"scheme and user data won't be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrivalinux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandrivalinux version \"8.1\" is not recommended."
msgstr ""
"仅当在您的计算机上发现了已有的 GNU/Linux 分区，才会激活这一步骤。\n"
"\n"
"DrakX 现在需要知道您是想要执行全新安装，还是升级已有的 Mandrivalinux 系统：\n"
"\n"
" *\n"
"\"%s\"：总体来说，这将完全销毁旧系统。但是，根据您选择的分区方案，您可以让现有的数据(比如\"主\"目录)免于覆盖。如果您想要更改硬盘的分区方案，或者更该文件系统，您就应该使用此选项。\n"
"\n"
" * \"%s\"：这一安装级别允许您更新目前安装在您 Mandrivalinux\n"
"系统上的软件包。您的分区方案和用户数据都不会被破坏。绝大多数配置步骤仍然可用，与标准安装类似。\n"
"\n"
"使用``升级''选项应该在 \"8.1\" 或更新版本的 Mandrivalinux 系统上工作正常。不推荐在先于 \"8.1\" 版本的\n"
"Mandrivalinux 系统上执行升级。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"isn't in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card isn't the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it isn't\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that doesn't suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandrivalinux Control Center after the installation has finished to benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandrivalinux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
"作为概览，DrakX\n"
"将会将它所发现的关于系统的信息概览显示出来。根据您所安装的硬件不同，您可能会看到以下各项的部分或全部。每项由几个可配置的硬件项组成，而每个条目后面都列出了当前配置的概览。单击相应的\"%s\"按钮可进行更改。\n"
"\n"
" * \"%s\"：检查当前的键盘映射配置，如果需要的话进行更改。\n"
"\n"
" *\n"
"\"%s\"：检查当前的国家选择。如果您并非在这个国家，请单击\"%s\"按钮，并选择另外的选项。如果您的国家在第一个列表中并没有显示出来，单击\"%s\"按钮可获得完整的国家列表。\n"
"\n"
" * \"%s\"：默认情况下，DrakX 会根据您所选的国家猜测您的时区。如果时区不对的话，您可以单击此处的\"%s\"按钮。\n"
"\n"
" * \"%s\"：检查当前的鼠标配置，如果需要的话单击按钮进行修改。\n"
"\n"
" *\n"
"\"%s\"：单击\"%s\"按钮将打开打印机配置向导。请参看``初学者指南''中的相应章节，其中详细描述了如何设置新打印机。那里给出的界面与安装时所用的界面大体相同。\n"
"\n"
" *\n"
"\"%s\"：如果在您的系统中检测到了声卡，则会在此处显示。如果您发现在此显示的声卡与您系统中实际安装的声卡并不相同，您可以单击该按钮选择不同的驱动程序。\n"
"\n"
" *\n"
"\"%s\"：如果在您的系统中检测到了电视卡，则会在此显示关于其配置的信息。如果您安装了电视卡，但并未被正确检测到，请单击\"%s\"尝试手动进行配置。\n"
"\n"
" * \"%s\"：如果您觉得检测的配置有错，可以点击\"%s\"来更改与该卡关联的参数。\n"
"\n"
" * \"%s\"：默认情况下，DrakX 会将您的图形界面配置为 \"800x600\" 或 \"1024x768\"\n"
"分辨率。如果这不适合您的话，请单击\"%s\"重新配置您的图形界面。\n"
"\n"
" * \"%s\"：如果您想要配置您的 Internet 或局域网访问，现在就可以进行。请参考印刷文档或在安装完成后使用 Mandrivalinux\n"
"Control Center来获得完整的在线帮助。\n"
"\n"
" * \"%s\"：如果您所安装的计算机位于代理服务器之后，这里将允许您配置 HTTP 和 FTP 代理服务器地址。\n"
"\n"
" * \"%s\"：此项允许您重新调整安全级别，与以前的步骤完全相同()。\n"
"\n"
" * \"%s\"：如果您计划将您的计算机连接到\n"
"Internet，那么保护您的计算机免于攻击的有效方法就是设置防火墙。请参考``初学者指南''中的相应章节，以获得关于防火墙设置的细节。\n"
"\n"
" * \"%s\"：如果您想要更改您的引导程序配置，请单击此按钮。这仅适用于高级用户。请参考印刷文档或 Mandrivalinux Control\n"
"Center中关于引导程序配置的帮助。\n"
"\n"
" * \"%s\"：在此您可以精确调整要在您的计算机上运行哪些服务。如果您要将此计算机用作服务器，那么应该复查这一设置。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"如果您的显示卡支持不同的服务器，为了选择是否要启用 3D 加速，您应该在这里选择符合您需要的服务器。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"By the time you install Mandrivalinux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"在您安装 Mandrivalinux\n"
"的这个时候，很可能有些软件包在发行之后已经更新。有些故障已经被修正，有些安全问题已经被解决。为了让您能够享用这些更新，您现在可以从 Internet\n"
"上下载它们。如果您的 Internet 连接已经可以使用，请选择\"%s\"。如果您愿意以后再升级，请选择\"%s\"。\n"
"\n"
"\n"
"选择\"%s\"将显示一个清单，其中列出的地方都提供了更新软件包。您应该选择离您地理位置较近的镜像。之后会出现一个可以下载的软件包选择树：复查选项，然后单击\"%s\"来获取并安装选中的软件包，要终止请单击\"%s\"。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
"通常情况下，DrakX\n"
"能够正确检测到您的鼠标有几个按键。如果检测不正确的话，就会假定您有一个两键鼠标，并配置为模拟第三键。如果您想在两键鼠标上使用第三键的话，只需同时按下左右键。DrakX\n"
"会自动确定您的鼠标所使用的端口，是 PS/2、串口，还是 USB 接口。\n"
"\n"
"如果您的三键鼠标没有滚轮，您可以选择\"%s\"类型的鼠标。DrakX 就会配置您的鼠标来模拟滚轮：只需按下中键，然后上下移动鼠标。\n"
"\n"
"如果因为某些原因，您希望指定不同类型的鼠标，请从提供的列表中进行选择。\n"
"\n"
"您可以选择\"%s\"选项来选择``通用''鼠标类型，这样基本会适应任何鼠标。\n"
"\n"
"如果您选择了不同于默认值的鼠标，会出现一个测试屏幕。请用您鼠标的按键和滚轮来验证设置是否正确，鼠标是否工作正常。如果鼠标工作不正常，请按空格键或\n"
"[Enter] 键取消测试，返回到可供选择的鼠标列表中。\n"
"\n"
"\n"
"滚轮鼠标有时可能无法自动检测，所以您可能需要从列表中进行选择。请确定您选对了鼠标所连接的端口。选择鼠标后，单击\"%s\"按钮，会在屏幕上出现鼠标图像。试着滚动滚轮，以确保滚轮可以正常激活。您在滚动鼠标滚轮的同时应该看到屏幕上的滚轮也在滚动。另外，也应该测试一下鼠标按钮，鼠标指针的移动应该和鼠标的操作保持一致。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrivalinux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"X(代表 X 窗口系统)是 GNU/Linux 图形界面的核心部分。Mandrivalinux\n"
"附带的所有图形环境(KDE、GNOME、AfterStep、WindowMaker 等)都依赖于该系统。\n"
"\n"
"您将会看到不同的参数列表，以便进行图形显示选项的更改来达到最佳状态。其中包括：\n"
"\n"
"显示卡\n"
"\n"
"   安装程序通常可以自动检测并配置连接到计算机上的显示卡。如果检测的结果不对，您可以在此列表中选择您所实际使用的显示卡。\n"
"\n"
"   如果您的显示卡支持不同的服务器，为了选择是否要启用 3D 加速，您应该在这里选择符合您需要的服务器。\n"
"\n"
"\n"
"\n"
"显示器\n"
"\n"
"   安装程序通常可以自动检测并配置连接到计算机上的显示器。如果检测的结果不对，您可以在此列表中选择您所实际使用的显示器。\n"
"\n"
"\n"
"\n"
"分辨率\n"
"\n"
"   \n"
"您可以在此选择分辨率和颜色深度，但您的显示卡硬件要支持。请选择最适合您需要的选项(您在安装完成之后仍可进行修改)。所选配置的例子会显示在显示器上。\n"
"\n"
"\n"
"\n"
"测试\n"
"\n"
"   根据您的硬件，此项可能不会出现。\n"
"\n"
"   系统将会以所选的分辨率打开图形屏幕。如果您在测试时看到了提示，请回答\"%s\"，DrakX\n"
"就会执行安装的下一步骤。如果您没有看到任何提示，这意味着自动检测的某一部分不正确，测试将会在 12\n"
"秒后自动结束，并把您带回菜单。请更改设置，直到您能够看到正确的图形显示为止。\n"
"\n"
"\n"
"\n"
"选项\n"
"\n"
"   您可以在此选择是否想要在计算机启动的时候就切换到图形界面。显然，如果本机将用作服务器，或者您的显示配置还没有成功，您可能想要选择\"%s\"。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandrivalinux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you don't have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrivalinux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"现在，应该为您的计算机选择打印系统了。其它的操作系统也许只提供了一种选择，但 Mandrivalinux\n"
"提供了两种。每种打印系统都能够在不同的配置中大展身手。\n"
"\n"
" * \"%s\" --\n"
"这是``不排队打印''的缩写。如果您的打印机是直接连接在这台电脑上的，您也不会打印太多的任务，更不会使用网络打印机，那么请选择本系统。(\"%s\"\n"
"只能应付极为简单的网络情况，而且在网络中使用也很慢。)如果您从来没有使用过 GNU/Linux，那么推荐您使用\"pdq\"。\n"
"\n"
" * \"%s\" -``通用 Unix\n"
"打印系统''，不论是打印到本地打印机，还是打印到地球另一面的网络打印机，本系统都能完全胜任。它配置简单，甚至可以作为老式 \"lpd\n"
"\"打印系统的服务器和客户机。所以即便是老得掉牙的操作系统需要打印服务的话，都可以顺畅的应用本系统。尽管它的功能十分强大，可它的基本设置仍然和\n"
"\"pdq\" 一样简单。如果您想模拟一台 \"lpd\" 服务器，不要忘了打开 \"cups-lpd \" 守护程序。\"%s\"\n"
"还包括一个图形界面，可用来打印或选择打印机选项，以及管理打印机。\n"
"\n"
"如果您现在进行了选择，但稍后又发现您并不喜欢所选择的打印系统，可以轻松修改。只需从 Mandrivalinux Control Center中选择\n"
"PrinterDrake，然后单击\"%s\"按钮。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"显示卡\n"
"\n"
"   安装程序通常可以自动检测并配置连接到计算机上的显示卡。如果检测的结果不对，您可以在此列表中选择您所实际使用的显示卡。\n"
"\n"
"   如果您的显示卡支持不同的服务器，为了选择是否要启用 3D 加速，您应该在这里选择符合您需要的服务器。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrivalinux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"在继续之前，您应该仔细阅读许可协议的条款。该许可适用于整个 Mandrivalinux\n"
"发行版。如果您同意其中的全部条款，请选中\"%s\"框。如果不同意，单击\"%s\"按钮将重新启动您的计算机。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which aren't needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably don't want to start any services which you don't need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"此对话框可让您选择启动时要启动哪些服务。\n"
"\n"
"DrakX 将会列出本次安装所有可用的服务。请仔细检查，并且去掉那些在启动时不总需要的服务。\n"
"\n"
"将您的鼠标移动到选项上面会弹出帮助提示，解释这个服务的作用。不过，如果您不确定某一个服务到底是否需要，还是保留默认设置会比较安全。\n"
"\n"
"!!\n"
"如果您的机器将作为服务器，在这一步请格外小心：请不要启动任何您不需要的服务。请不要忘了，如果在服务器上启用了某些服务，这些服务可能对服务器造成潜在的危险。通常，只选择您确实要使用的那些服务。\n"
"!!"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"显示器\n"
"\n"
"   安装程序通常可以自动检测并配置连接到计算机上的显示器。如果检测的结果不对，您可以在此列表中选择您所实际使用的显示器。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandrivalinux, and to make it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandrivalinux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"现在该指定要在您的系统中安装哪些程序了。Mandrivalinux\n"
"为您准备了数千个软件包。而为了使管理软件包更加容易，软件包已经按相似程度分成了多个组。\n"
"\n"
"Mandrivalinux\n"
"按四个类别对软件包进行了分类。您可以从不同的类别混合选择应用程序。也就是说，``工作站''中也可以选择安装``服务器''分类中的应用程序。\n"
"\n"
" * \"%s\"：如果您计划将您的计算机用作工作站，请选择工作站分类中的一个或多个组。\n"
"\n"
" * \"%s\"：如果您计划使用您的计算机进行编程，请从该类别中选择相应的组。特殊的 \"LSB\"\n"
"组将会对您的系统进行配置，这样所编译的结果将会尽可能遵从 Linux 标准基础(LSB)规范。\n"
"\n"
"   选择 \"LSB\" 组将安装 \"2.4\" 内核系列，而不是默认的 \"2.6\" 内核。这是为了保证系统能够百分之百的遵从\n"
"LSB。但是，即便您不选择 \"LSB\" 组，您也会得到一个接近百分之百遵从 LSB 的系统。\n"
"\n"
" * \"%s\"：如果您的计算机即将成为服务器，请选择您想要安装在计算机上的公共服务。\n"
"\n"
" * \"%s\"：这里您可以选择您首选的图形环境。如果您想要使用图形界面，则至少要选择其中一个。\n"
"\n"
"将鼠标光标移动到组名之上，您会看到该组的简要描述文字。\n"
"\n"
"如果您对所提供的软件包比较熟悉，或者您想要完全控制安装什么软件包，就可以选中\"%s\"选项。\n"
"\n"
"如果您以\"%s\"模式启动安装，您可以不选择任何组，这样可以避免安装任何新软件包。这对于修复或升级已有系统很有帮助。\n"
"\n"
"如果您在执行常规安装(与升级相对)的时候一个组也没有选中，会弹出一个对话框建议最小安装的不同选项：\n"
"\n"
" * \"%s\"：安装图形桌面所需的最少软件包。\n"
"\n"
" * \"%s\"：安装基本系统，另加基本工具及相应文档。此安装适合建立服务器。\n"
"\n"
" * \"%s\"：将安装使 Linux 系统能够正常运行的最少软件包。使用此安装，您仅仅有命令行界面。此安装的总计大小为约 65 兆字节。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"The Mandrivalinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"Mandrivalinux 安装分布于多张 CD-ROM 中。如果选中软件包位于另外的 CD-ROM，DrakX 将弹出当前\n"
"CD，并要求您插入所需的正确 CD。如果您手中没有所请求的 CD，只需单击\"%s\"，就不会安装相应的软件包了。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
"GNU/Linux 以 GMT (格林威治标准时)管理时间，并根据您所选的时区将其翻译为本地时间。如果您主板上的时钟设定为本地时间，您应当关闭\n"
"\"%s\"，这将会让 GNU/Linux 知道系统始终和硬件时钟在同一时区。如果本计算机仍然运行其它操作系统，如\n"
"Windows，则此设置将十分有用。\n"
"\n"
"\"%s\"选项将连接到 Internet 上的远程时间服务器自动校准系统时钟。要让此特性正常工作，您必须连接到\n"
"Internet。最好选择地理位置离您较近的时间服务器。此选项还会自动安装时间服务器，这样您局域网中的其它计算机都能够进行自动校时了。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: don't make the password too long or too complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password won't be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you don't know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"要保卫您的 GNU/Linux 系统，现在是最关键的一步：您需要输入 \"root\" 密码。\"Root\"\n"
"是系统管理员，而且是唯一有权进行更新、添加用户、更改泛系统配置等操作的用户。简言之，\"root\"\n"
"可以做任何事！这就是为什么您必须选择难于猜测的密码：如果您的密码太简单了，DrakX\n"
"会提醒您的。正如您所看到的那样，您不必非得输入密码，但是我们强烈建议您输入一个密码。GNU/Linux 和其它任何操作系统一样容易遇到错误的操作。由于\n"
"\"root\" 可以越过所有限制并在访问分区时无意间就删除分区上的全部数据，所以成为 \"root\" 应该很难才对。\n"
"\n"
"密码应该是字母和数字的无序混合，并且至少要有 8 位长。绝对不要将 \"root\" 的密码写下来 -- 这样的密码形同虚设。\n"
"\n"
"还有一条准则 -- 不要将密码设置得太长或太复杂，否则您自己也记不住！\n"
"\n"
"您输入的密码不会显示在屏幕上。为了减少盲打所造成的输入错误，您需要再次输入密码。如果您碰巧两次都输错了，那么这个``不正确的''密码将成为您第一次以\n"
"\"root\" 身份登录时的密码。\n"
"\n"
"如果您想要身份验证服务器控制对您计算机的访问，请单击\"%s\"按钮。\n"
"\n"
"如果您的网络使用 LDAP 或 NIS，又或者PDC Windows\n"
"域验证服务，请选择相应的\"%s\"。如果您不知道应该使用哪种，请询问您的网络管理员。\n"
"\n"
"如果您记住密码有困难的话，如果您的计算机不需要连接到 Internet，您也绝对信任可使用您计算机的所有人，您可以选择\"%s\"。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"在此列出了您硬盘上已有的 Linux\n"
"分区。您可以保留向导所作的选择，因为对于大多数安装来说这一选择是较好的。如果您想要进行更改的话，您必须至少定义一个根分区(\"/\")。不要选择太小的分区，否则您可能无法安装足够的软件。如果您想要将您的数据存放在单独的分区中，您还需要创建一个\n"
"\"/home\" 分区(仅当您有多于一个 Linux 分区时才可用)。\n"
"\n"
"每个分区都按下列格式列出：\"名称\"，\"容量\"。\n"
"\n"
"\"名称\"结构为：\"硬盘类型\"，\"硬盘编号\"，\"分区编号\"(例如，\"hda1\")。\n"
"\n"
"\"硬盘类型\"取决于硬盘的接口方式。如您的硬盘是 IDE 硬盘，则\"硬盘类型\"就为\"hd\"；若硬盘为 SCSI 硬盘，就为\"sd\"。\n"
"\n"
"\"硬盘编号\"就是在\"hd\"或\"sd\"后面的那个字母。对于IDE硬盘：\n"
"\n"
" * \"a\"意味着\"主 IDE 控制器的主硬盘\"；\n"
"\n"
" * \"b\"意味着\"主 IDE 控制器的从硬盘\"；\n"
"\n"
" * \"c\"意味着\"从 IDE 控制器的主硬盘\"；\n"
"\n"
" * \"d\"意味着\"从IDE控制器的从硬盘\"。\n"
"\n"
"对于 SCSI 硬盘，\"a\"意味着\"最低的 SCSI ID\"，\"b\"意味着\"第二低的 SCSI ID\"，依此类推。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country isn't in the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\"：检查当前的国家选择。如果您并非在这个国家，请单击\"%s\"按钮，并选择另外的选项。如果您的国家在第一个列表中并没有显示出来，单击\"%s\"按钮可获得完整的国家列表。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you don't have to reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"won't be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrivalinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"如果您想要重用某些现有的 GNU/Linux\n"
"分区，您可能想要先格式化其中的一些分区，并删除这些分区中的全部数据。如果您希望这么做的话，请同时选中这些分区。\n"
"\n"
"请注意，没有必要重新格式化已有的全部分区。您必须重新格式化包含操作系统的分区(比如 \"/\"，\"/usr\" 或\n"
"\"/var\")，而无需重新格式化包含您想要保留的数据的分区(典型的如 \"/home\")。\n"
"\n"
"请在选择分区时额外小心。格式化后，选中分区的全部数据都将被删除，您也无法进行恢复。\n"
"\n"
"如果您准备好格式化分区了，请单击\"%s\"。\n"
"\n"
"如果您想要选择其它分区用于安装 Mandrivalinux 操作系统，请单击\"%s\"。\n"
"\n"
"如果您想要选择要检测磁盘上的坏块，请单击单击\"%s\"。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrivalinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandrivalinux was\n"
"finalized. If you don't know what a particular service is supposed to do or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
"如果您选中了想要选择单个软件包，安装程序会显示出一个软件包的树形结构，其中会按照组和子组分类显示全部软件包。浏览软件包树时，您可以选择整个组，子组或单个软件包。\n"
"\n"
"只要您在左侧的树中选择了软件包，右侧就会出现该软件包用途的描述。\n"
"\n"
"!!\n"
"如果选择了服务器软件包，不管是您特意选中的，还是因为该软件包是某组的成员，您都需要确认是否真的想要安装这些服务器。默认情况下，Mandrivalinux\n"
"会在启动时自动启动已安装的全部服务。尽管在发行版送出时这些服务是安全的，但完全有可能在此版本 Mandrivalinux\n"
"完成后发现了相应软件的安全漏洞。如果您并不知道特定服务的用途，或者不知道为什么要安装这些服务，请单击\"%s\"。单击\"%s\"将安装列出的服务，并且启动时这些服务会被自动启动。\n"
"!!\n"
"\n"
"\n"
"\"%s\"选项用于在安装程序自动选择软件包以解决依赖性问题时禁止弹出警告对话框。某些软件包会依赖其它软件包，而要安装一个软件包的需要先安装另外一个软件包。安装程序会自动确定要满足依赖性需要安装哪些软件包，以便顺利完成安装。\n"
"\n"
"\n"
"列表底部的小软盘图标允许您装入先前安装时创建的软件包列表。如果您一次想要配置多台计算机，此选项可能非常有用。单击此图标后，您需要插入另外一次安装结束后创建的那张软盘。参看最后一步的第二条提示，其中描述了如何创建这样的软盘。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard don't match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"根据您在中所选择的语言，DrakX 将会自动选择特定类型的键盘配置。请检查列出的选项是否适合您，若不适合请选择其它键盘布局。\n"
"\n"
"\n"
"当然，可能您使用的语言与键盘并不相同：例如，您是说英语的瑞典本土人，但正在用瑞士键盘。或者，如果您说英语但住在魁北克，您可能也会遇到您的母语和所使用的键盘并不匹配的情况。不管是哪种情况，您都可以在这一步骤从列表种选择相应的键盘。\n"
"\n"
"单击\"%s\"按钮可显示所支持键盘的完整列表。\n"
"\n"
"如果您选择了基于非拉丁字符集的键盘布局，下个对话框将允许您选择用于切换拉丁和非拉丁布局之间的组合键。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can't determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" won't install any boot loader. Use this option only if you\n"
"know what you're doing."
msgstr ""
"所谓引导程序，是指计算机启动时所执行的小程序。它的责任就是启动整个系统。通常，引导程序的安装是全自动的。DrakX\n"
"将分析磁盘的引导扇区，并根据发现的情况做出以下操作：\n"
"\n"
" * 如果发现了 Windows 引导扇区，则将其替换为 GRUB/LILO 引导扇区。这样，您就可以装入 GNU/Linux\n"
"或在您计算机上安装的任何操作系统。\n"
"\n"
" * 如果发现了 GRUB 或 LILO 引导扇区，则将其替换为新的引导扇区。\n"
"\n"
"如果无法确定，DrakX\n"
"将询问您将引导程序放在哪里。通常，\"%s\"是最安全的地方。选择\"%s\"将不会安装任何引导程序。除非您真的知道自己在做什么的话，否则不要使用此选项。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Don't forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"现在安装已经完成，您的 GNU/Linux 系统已经可以使用了。只需单击\"%s\"就可重新启动系统。别忘了取出安装介质(CD-ROM\n"
"或软盘)。在计算机完成硬件测试后，您所看到的第一个系统自检完后的屏幕就是引导菜单，您可以从中选择要启动哪个操作系统。\n"
"\n"
"\"%s\"按钮显示了两个额外的按钮，可：\n"
"\n"
" * \"%s\"：创建一张安装软盘。该软盘可在无人值守的情况下，按照您刚才的设置重新安装一个类似的系统。\n"
"\n"
"   请注意，单击按钮后会出现两个不同的选项：\n"
"\n"
"    * \"%s\"。 半自动安装。只有分区部分是交互的。\n"
"\n"
"    * \"%s\"。 全自动安装：硬盘会被完全重写，所有数据都将丢失。\n"
"\n"
"   如果有一大批相同的机器要安装，这个功能非常方便。请参考我们网站上的自动安装一节中的更多信息。\n"
"\n"
" * \"%s\"(*)：把您刚才选择的软件包记录在软盘上。要使用本次的安装包执行另外一次安装，请插入软盘然后开始安装。出现提示的时候，按 [F1]\n"
"键，输入 >>linux defcfg=\"floppy\" <<。\n"
"\n"
"(*) 您需要一张 FAT 格式的软盘。要在 GNU/Linux 下创建一张这样的软盘，一种方法是输入 \"mformat a:\"；另一种是首先\n"
"\"fdformat /dev/fd0\"，然后 \"mkfs.vfat /dev/fd0\"。"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandrakesoft.com:/cooker/doc/manualB/modules/zh_cn/drakx-chapter.xml
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrivalinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"在这一步中，您需要选择要使用哪个或哪些分区来安装您的 Mandrivalinux 系统。如果已经定义了分区，不管是先前安装的 GNU/Linux\n"
"还是由其它分区工具划分的，您都可以使用已有的分区。否则，必须对硬盘分区进行定义。\n"
"\n"
"要创建分区，您必须先选择硬盘。您可以单击``hda'' 选择第一个 IDE 硬盘进行分区，``hdb'' 选择第二个 IDE 硬盘，``sda''\n"
"选择第一个 SCSI 驱动器，依此类推。\n"
"\n"
"为了对选中硬盘进行分区，您需要使用这些选项：\n"
"\n"
" * \"%s\"：此选项将删除选中硬盘上的全部分区\n"
"\n"
" * \"%s\"：此选项可在您硬盘的剩余空间中为您自动创建 ext3 和交换分区\n"
"\n"
"\"%s\"：使您可以访问额外特性：\n"
"\n"
" * \"%s\"：将分区表保存到软盘。如果需要的话，稍后可进行分区表修复。强烈推荐您执行这一步骤。\n"
"\n"
" * \"%s\"：允许您恢复先前保存在软盘上的分区表。\n"
"\n"
" * \"%s\"：如果您的分区表已损坏，您可以使用此选项尝试修复。请额外小心，并记住这一选项并不总是能够帮助您。\n"
"\n"
" * \"%s\"：忽略全部更改并重新装入硬盘上的原始分区表。\n"
"\n"
" * \"%s\"：取消此选项将强迫用户手动挂载类似软盘和 CD-ROM 的可移动介质。\n"
"\n"
" * \"%s\"：如果您想要使用向导对您的营盘进行分区，则使用此选项。如果您对分区理解不深的话，推荐您使用此选项。\n"
"\n"
" * \"%s\"：使用此选项取消您的更改。\n"
"\n"
" * \"%s\"：允许对分区进行额外的操作(类型、选项、格式化)，并给出关于硬盘的额外信息。\n"
"\n"
" * \"%s\"：当您完成对硬盘的分区后，此选项将把您的更改回存到硬盘。\n"
"\n"
"定义分区大小时，您可以使用键盘上的光标键对分区大小进行调整。\n"
"\n"
"注意：您可以使用键盘访问任何选项。可以使用 [Tab] 和 [上/下]光标键来切换分区。\n"
"\n"
"选中分区后，您可以用：\n"
"\n"
" * Ctrl+C 创建新分区(如果选中了空分区)\n"
"\n"
" * Ctrl+D 删除分区\n"
"\n"
" * Ctrl+M 设定挂载点\n"
"\n"
"要的关于不同的文件系统类型的更多信息，请查看 ``参考手册''中 ext2FS 一章。\n"
"\n"
"如果您在 PPC 计算机上安装，您可能需要创建至少 1MB 大小的 HFS``bootstrap'' 分区，该分区将用于 yaboot\n"
"引导程序。如果您创建的分区再稍微大点，比如说 50MB，您可能会发现这个分区可用来存储内核或紧急引导时的虚拟磁盘映像。"